1372 files changed, 710172 insertions, 0 deletions

diff --git a/ABOUT-NLS b/ABOUT-NLS
new file mode 100644
index 0000000..3cc8286
--- /dev/null
+++ b/ABOUT-NLS
@@ -0,0 +1,1379 @@
+1 Notes on the Free Translation Project
+***************************************
+
+Free software is going international!  The Free Translation Project is a
+way to get maintainers of free software, translators, and users all
+together, so that free software will gradually become able to speak many
+languages.  A few packages already provide translations for their
+messages.
+
+   If you found this 'ABOUT-NLS' file inside a distribution, you may
+assume that the distributed package does use GNU 'gettext' internally,
+itself available at your nearest GNU archive site.  But you do _not_
+need to install GNU 'gettext' prior to configuring, installing or using
+this package with messages translated.
+
+   Installers will find here some useful hints.  These notes also
+explain how users should proceed for getting the programs to use the
+available translations.  They tell how people wanting to contribute and
+work on translations can contact the appropriate team.
+
+1.1 INSTALL Matters
+===================
+
+Some packages are "localizable" when properly installed; the programs
+they contain can be made to speak your own native language.  Most such
+packages use GNU 'gettext'.  Other packages have their own ways to
+internationalization, predating GNU 'gettext'.
+
+   By default, this package will be installed to allow translation of
+messages.  It will automatically detect whether the system already
+provides the GNU 'gettext' functions.  Installers may use special
+options at configuration time for changing the default behaviour.  The
+command:
+
+     ./configure --disable-nls
+
+will _totally_ disable translation of messages.
+
+   When you already have GNU 'gettext' installed on your system and run
+configure without an option for your new package, 'configure' will
+probably detect the previously built and installed 'libintl' library and
+will decide to use it.  If not, you may have to to use the
+'--with-libintl-prefix' option to tell 'configure' where to look for it.
+
+   Internationalized packages usually have many 'po/LL.po' files, where
+LL gives an ISO 639 two-letter code identifying the language.  Unless
+translations have been forbidden at 'configure' time by using the
+'--disable-nls' switch, all available translations are installed
+together with the package.  However, the environment variable 'LINGUAS'
+may be set, prior to configuration, to limit the installed set.
+'LINGUAS' should then contain a space separated list of two-letter
+codes, stating which languages are allowed.
+
+1.2 Using This Package
+======================
+
+As a user, if your language has been installed for this package, you
+only have to set the 'LANG' environment variable to the appropriate
+'LL_CC' combination.  If you happen to have the 'LC_ALL' or some other
+'LC_xxx' environment variables set, you should unset them before setting
+'LANG', otherwise the setting of 'LANG' will not have the desired
+effect.  Here 'LL' is an ISO 639 two-letter language code, and 'CC' is
+an ISO 3166 two-letter country code.  For example, let's suppose that
+you speak German and live in Germany.  At the shell prompt, merely
+execute 'setenv LANG de_DE' (in 'csh'), 'export LANG; LANG=de_DE' (in
+'sh') or 'export LANG=de_DE' (in 'bash').  This can be done from your
+'.login' or '.profile' file, once and for all.
+
+   You might think that the country code specification is redundant.
+But in fact, some languages have dialects in different countries.  For
+example, 'de_AT' is used for Austria, and 'pt_BR' for Brazil.  The
+country code serves to distinguish the dialects.
+
+   The locale naming convention of 'LL_CC', with 'LL' denoting the
+language and 'CC' denoting the country, is the one use on systems based
+on GNU libc.  On other systems, some variations of this scheme are used,
+such as 'LL' or 'LL_CC.ENCODING'.  You can get the list of locales
+supported by your system for your language by running the command
+'locale -a | grep '^LL''.
+
+   Not all programs have translations for all languages.  By default, an
+English message is shown in place of a nonexistent translation.  If you
+understand other languages, you can set up a priority list of languages.
+This is done through a different environment variable, called
+'LANGUAGE'.  GNU 'gettext' gives preference to 'LANGUAGE' over 'LANG'
+for the purpose of message handling, but you still need to have 'LANG'
+set to the primary language; this is required by other parts of the
+system libraries.  For example, some Swedish users who would rather read
+translations in German than English for when Swedish is not available,
+set 'LANGUAGE' to 'sv:de' while leaving 'LANG' to 'sv_SE'.
+
+   Special advice for Norwegian users: The language code for Norwegian
+bokma*l changed from 'no' to 'nb' recently (in 2003).  During the
+transition period, while some message catalogs for this language are
+installed under 'nb' and some older ones under 'no', it's recommended
+for Norwegian users to set 'LANGUAGE' to 'nb:no' so that both newer and
+older translations are used.
+
+   In the 'LANGUAGE' environment variable, but not in the 'LANG'
+environment variable, 'LL_CC' combinations can be abbreviated as 'LL' to
+denote the language's main dialect.  For example, 'de' is equivalent to
+'de_DE' (German as spoken in Germany), and 'pt' to 'pt_PT' (Portuguese
+as spoken in Portugal) in this context.
+
+1.3 Translating Teams
+=====================
+
+For the Free Translation Project to be a success, we need interested
+people who like their own language and write it well, and who are also
+able to synergize with other translators speaking the same language.
+Each translation team has its own mailing list.  The up-to-date list of
+teams can be found at the Free Translation Project's homepage,
+'http://translationproject.org/', in the "Teams" area.
+
+   If you'd like to volunteer to _work_ at translating messages, you
+should become a member of the translating team for your own language.
+The subscribing address is _not_ the same as the list itself, it has
+'-request' appended.  For example, speakers of Swedish can send a
+message to 'sv-request@li.org', having this message body:
+
+     subscribe
+
+   Keep in mind that team members are expected to participate _actively_
+in translations, or at solving translational difficulties, rather than
+merely lurking around.  If your team does not exist yet and you want to
+start one, or if you are unsure about what to do or how to get started,
+please write to 'coordinator@translationproject.org' to reach the
+coordinator for all translator teams.
+
+   The English team is special.  It works at improving and uniformizing
+the terminology in use.  Proven linguistic skills are praised more than
+programming skills, here.
+
+1.4 Available Packages
+======================
+
+Languages are not equally supported in all packages.  The following
+matrix shows the current state of internationalization, as of Jun 2014.
+The matrix shows, in regard of each package, for which languages PO
+files have been submitted to translation coordination, with a
+translation percentage of at least 50%.
+
+     Ready PO files       af am an ar as ast az be bg bn bn_IN bs ca crh cs
+                        +---------------------------------------------------+
+     a2ps               |                       []                []     [] |
+     aegis              |                                                   |
+     anubis             |                                                   |
+     aspell             |                []                       []     [] |
+     bash               |                          []             []     [] |
+     bfd                |                                                   |
+     binutils           |                                         []        |
+     bison              |                                                   |
+     bison-runtime      |                []                                 |
+     buzztrax           |                                                [] |
+     ccd2cue            |                                                   |
+     ccide              |                                                   |
+     cflow              |                                                   |
+     clisp              |                                                   |
+     coreutils          |                                         []     [] |
+     cpio               |                                                   |
+     cppi               |                                                   |
+     cpplib             |                                         []        |
+     cryptsetup         |                                                [] |
+     datamash           |                                                   |
+     denemo             |                                         []     [] |
+     dfarc              |                                         []        |
+     dialog             |       []                                []     [] |
+     dico               |                                                   |
+     diffutils          |                                                [] |
+     dink               |                                         []        |
+     direvent           |                                                   |
+     doodle             |                                                [] |
+     dos2unix           |                                                   |
+     dos2unix-man       |                                                   |
+     e2fsprogs          |                                         []     [] |
+     enscript           |                                         []        |
+     exif               |                                                [] |
+     fetchmail          |                                         []     [] |
+     findutils          |                                                [] |
+     flex               |                                         []        |
+     freedink           |                                         []     [] |
+     fusionforge        |                                                   |
+     gas                |                                                   |
+     gawk               |                                         []        |
+     gcal               |                                         []        |
+     gcc                |                                                   |
+     gdbm               |                                                   |
+     gettext-examples   | []             []        []             []     [] |
+     gettext-runtime    |                          []             []     [] |
+     gettext-tools      |                          []             []        |
+     gjay               |                                                   |
+     glunarclock        |                []        []                    [] |
+     gnubiff            |                                                [] |
+     gnubik             |          []                                       |
+     gnucash            |          ()              ()             []        |
+     gnuchess           |                                                   |
+     gnulib             |                                                [] |
+     gnunet             |                                                   |
+     gnunet-gtk         |                                                   |
+     gold               |                                                   |
+     gphoto2            |                                                [] |
+     gprof              |                          []                       |
+     gramadoir          |                                                   |
+     grep               |                          []             []     [] |
+     grub               |                                         []        |
+     gsasl              |                                                   |
+     gss                |                                                   |
+     gst-plugins-bad    |                          []                    [] |
+     gst-plugins-base   |                          []             []     [] |
+     gst-plugins-good   |                          []             []     [] |
+     gst-plugins-ugly   |                          []             []     [] |
+     gstreamer          |                []        []             []     [] |
+     gtick              |                                                [] |
+     gtkam              |                       []                       [] |
+     gtkspell           | []             []     []                []     [] |
+     guix               |                                                   |
+     guix-packages      |                                                   |
+     gutenprint         |                                         []        |
+     hello              |                                         []        |
+     help2man           |                                                   |
+     help2man-texi      |                                                   |
+     hylafax            |                                                   |
+     idutils            |                                                   |
+     iso_15924          |                                                [] |
+     iso_3166           | []          []        [] [] []  []   [] [] []  [] |
+     iso_3166_2         |                                                   |
+     iso_4217           |                                                [] |
+     iso_639            |             [] []     [] [] []  []      [] []  [] |
+     iso_639_3          |                []                          []     |
+     iso_639_5          |                                                   |
+     jwhois             |                                                   |
+     kbd                |                                                [] |
+     klavaro            |          []              [] []          []     [] |
+     ld                 |                          []                       |
+     leafpad            |                       [] []             []     [] |
+     libc               |                          []             []     [] |
+     libexif            |                       ()                          |
+     libextractor       |                                                   |
+     libgnutls          |                                                [] |
+     libgphoto2         |                                                [] |
+     libgphoto2_port    |                                                [] |
+     libgsasl           |                                                   |
+     libiconv           |                          []                    [] |
+     libidn             |                                                [] |
+     liferea            |          []    []                       []     [] |
+     lilypond           |                                         []     [] |
+     lordsawar          |                                         []        |
+     lprng              |                                                   |
+     lynx               |                                         []     [] |
+     m4                 |                                                [] |
+     mailfromd          |                                                   |
+     mailutils          |                                                   |
+     make               |                                                [] |
+     man-db             |                                         []     [] |
+     man-db-manpages    |                                                   |
+     midi-instruments   |          []                             []     [] |
+     minicom            |                                                [] |
+     mkisofs            |                                                [] |
+     myserver           |                                                [] |
+     nano               |                          []             []     [] |
+     opcodes            |                                                   |
+     parted             |                                                [] |
+     pies               |                                                   |
+     pnmixer            |                                                   |
+     popt               |                                                [] |
+     procps-ng          |                                                   |
+     procps-ng-man      |                                                   |
+     psmisc             |                                                [] |
+     pspp               |                                         []        |
+     pushover           |                                                [] |
+     pwdutils           |                                                   |
+     pyspread           |                                                   |
+     radius             |                                         []        |
+     recode             |                       []                []     [] |
+     recutils           |                                                   |
+     rpm                |                                                   |
+     rush               |                                                   |
+     sarg               |                                                   |
+     sed                |                []        []             []     [] |
+     sharutils          |                                                [] |
+     shishi             |                                                   |
+     skribilo           |                                                   |
+     solfege            |                                         []     [] |
+     solfege-manual     |                                                   |
+     spotmachine        |                                                   |
+     sudo               |                                         []     [] |
+     sudoers            |                                         []     [] |
+     sysstat            |                                                [] |
+     tar                |                          []             []     [] |
+     texinfo            |                                         []     [] |
+     texinfo_document   |                                         []     [] |
+     tigervnc           |                          []                       |
+     tin                |                                                   |
+     tin-man            |                                                   |
+     tracgoogleappsa... |                                                   |
+     trader             |                                                   |
+     util-linux         |                                                [] |
+     ve                 |                                                   |
+     vice               |                                                   |
+     vmm                |                                                   |
+     vorbis-tools       |                                                [] |
+     wastesedge         |                                                   |
+     wcd                |                                                   |
+     wcd-man            |                                                   |
+     wdiff              |                                         []     [] |
+     wget               |                                                [] |
+     wyslij-po          |                                                   |
+     xboard             |                                                   |
+     xdg-user-dirs      | []    []    [] []     [] []     []      [] []  [] |
+     xkeyboard-config   |                          []             []     [] |
+                        +---------------------------------------------------+
+                          af am an ar as ast az be bg bn bn_IN bs ca crh cs
+                           4  0  2  5  3 11   0  8 25  3   3    1 55  4  74
+
+                          da  de  el en en_GB en_ZA eo es et eu fa fi  fr 
+                        +--------------------------------------------------+
+     a2ps               | []  []  []     []         [] [] []       []  []  |
+     aegis              | []  []                       []              []  |
+     anubis             | []  []                       []          []  []  |
+     aspell             | []  []         []         [] []          []  []  |
+     bash               |                           [] []              []  |
+     bfd                | []                           []          []  []  |
+     binutils           |                              []          []  []  |
+     bison              | []  []  []                [] [] []       []  []  |
+     bison-runtime      | []  []  []                [] [] []       []  []  |
+     buzztrax           | []  []                                   []  []  |
+     ccd2cue            | []  []                    []                 []  |
+     ccide              | []  []                    [] []          []  []  |
+     cflow              | []  []                    []             []  []  |
+     clisp              | []  []     []                []              []  |
+     coreutils          | []  []                       [] []           []  |
+     cpio               | []  []                       []          []  []  |
+     cppi               | []  []                    []             []  []  |
+     cpplib             | []  []                    [] []          []  []  |
+     cryptsetup         | []  []                       []          []  []  |
+     datamash           | []  []                    []                 []  |
+     denemo             | []                                               |
+     dfarc              | []  []                    [] []          []  []  |
+     dialog             | []  []  []                [] []    [] [] []  []  |
+     dico               | []  []                                   []  []  |
+     diffutils          | []  []  []                [] []              []  |
+     dink               | []  []                    [] []          []  []  |
+     direvent           | []  []                    []                 []  |
+     doodle             | []  []                    []             []      |
+     dos2unix           | []  []                    [] []              []  |
+     dos2unix-man       |     []                       []              []  |
+     e2fsprogs          | []  []                    [] []              []  |
+     enscript           | []  []         []         []             []  []  |
+     exif               | []  []                    [] []          []  []  |
+     fetchmail          | []  ()  []     []         [] []              []  |
+     findutils          | []  []  []                [] [] []       []  []  |
+     flex               | []  []                    [] []          []  []  |
+     freedink           | []  []  []                [] []    []    []  []  |
+     fusionforge        |     []                       []              []  |
+     gas                |                              []          []  []  |
+     gawk               | []  []                       []          []  []  |
+     gcal               | []  []                       []              []  |
+     gcc                |     []                                           |
+     gdbm               | []  []                    []             []  []  |
+     gettext-examples   | []  []  []                [] []          []  []  |
+     gettext-runtime    | []  []                    [] []          []  []  |
+     gettext-tools      | []  []                       []          []  []  |
+     gjay               |     []                    []             []  []  |
+     glunarclock        | []  []                    []             []  []  |
+     gnubiff            |     ()                    []             []  ()  |
+     gnubik             | []  []                    []             []  []  |
+     gnucash            | []  ()  ()     ()            ()          ()  ()  |
+     gnuchess           |     []                    [] []              []  |
+     gnulib             | []  []                    [] [] []       []  []  |
+     gnunet             |                              []                  |
+     gnunet-gtk         |     []                                           |
+     gold               |                              []          []  []  |
+     gphoto2            | []  ()                    []                 []  |
+     gprof              | []  []                    [] []          []  []  |
+     gramadoir          | []  []                    []             []  []  |
+     grep               | []  []                    [] [] []       []  []  |
+     grub               | []  []                       []          []  []  |
+     gsasl              | []  []                    []             []  []  |
+     gss                | []  []                    []             []  []  |
+     gst-plugins-bad    | []  []                                       []  |
+     gst-plugins-base   | []  []  []                   []          []  []  |
+     gst-plugins-good   | []  []  []                   []    []    []  []  |
+     gst-plugins-ugly   | []  []  []                [] []    []    []  []  |
+     gstreamer          | []  []  []                   []    []    []  []  |
+     gtick              | []  ()                    []             []  []  |
+     gtkam              | []  ()                    [] []          []  []  |
+     gtkspell           | []  []  []                [] []    []    []  []  |
+     guix               | []                        []                     |
+     guix-packages      |                                                  |
+     gutenprint         | []  []                                   []  []  |
+     hello              | []  []  []                [] [] []       []  []  |
+     help2man           | []  []  []                [] []          []  []  |
+     help2man-texi      |     []                       []              []  |
+     hylafax            |     []                       []                  |
+     idutils            | []  []                    []             []  []  |
+     iso_15924          | []  ()                    [] []    ()    []  ()  |
+     iso_3166           | []  ()  []                [] [] [] ()    []  ()  |
+     iso_3166_2         | []  ()                             ()        ()  |
+     iso_4217           | []  ()  []                   [] [] ()    []  ()  |
+     iso_639            | []  ()                    [] []    ()    []  ()  |
+     iso_639_3          |     ()                             ()        ()  |
+     iso_639_5          |     ()                             ()        ()  |
+     jwhois             |     []                    [] []          []  []  |
+     kbd                | []  []  []                [] []              []  |
+     klavaro            | []  []  []                [] []    []        []  |
+     ld                 | []                           []          []  []  |
+     leafpad            | []  []  []                [] []    []    []  []  |
+     libc               | []  []                       []          []  []  |
+     libexif            | []  []         ()            []              []  |
+     libextractor       |     []                                           |
+     libgnutls          |     []                    []             []  []  |
+     libgphoto2         | []  ()                                       []  |
+     libgphoto2_port    | []  ()                       []    []    []  []  |
+     libgsasl           | []  []                    []             []  []  |
+     libiconv           | []  []                    [] [] []       []  []  |
+     libidn             | []  []                    []             []  []  |
+     liferea            | []  ()  []                   []    []    []  []  |
+     lilypond           | []  []  []                [] []              []  |
+     lordsawar          | []  []                                           |
+     lprng              |                                                  |
+     lynx               | []  []                    []    []       []  []  |
+     m4                 | []  []  []                []             []  []  |
+     mailfromd          |                                              []  |
+     mailutils          |     []                       []          []  []  |
+     make               | []  []                       []          []  []  |
+     man-db             | []  []                    []                 []  |
+     man-db-manpages    |     []                                       []  |
+     midi-instruments   | []  []  []                [] [] []    [] []  []  |
+     minicom            | []  []                       []          []  []  |
+     mkisofs            |                           []             []  []  |
+     myserver           |     []                    []             []  []  |
+     nano               | []  []                    [] []    []    []  []  |
+     opcodes            | []  []                       []          []  []  |
+     parted             | []  []                                       []  |
+     pies               |     []                                           |
+     pnmixer            |     []                                       []  |
+     popt               | []  []                    [] []          []  []  |
+     procps-ng          |     []                                       []  |
+     procps-ng-man      |     []                                       []  |
+     psmisc             | []  []  []                []       []    []  []  |
+     pspp               |     []                       []              []  |
+     pushover           |     ()                    [] []              []  |
+     pwdutils           | []  []                                       []  |
+     pyspread           | []  []                                       []  |
+     radius             |                              []              []  |
+     recode             | []  []  []                [] []          []  []  |
+     recutils           |     []                       []          []  []  |
+     rpm                | []  []                    []             []  []  |
+     rush               |     []                                   []  []  |
+     sarg               | []                                           []  |
+     sed                | []  []  []                [] [] []       []  []  |
+     sharutils          |     []                    []    []           []  |
+     shishi             |     []                                   []  []  |
+     skribilo           | []                           []              []  |
+     solfege            | []  []                    [] [] []    [] []  []  |
+     solfege-manual     |     []                    [] [] []           []  |
+     spotmachine        | []  []                    []             []  []  |
+     sudo               | []  []                    [] []          []  []  |
+     sudoers            | []  []  []                []             []  []  |
+     sysstat            | []  []                    [] []          []  []  |
+     tar                | []  []                    [] [] []       []  []  |
+     texinfo            | []  []                    [] []              []  |
+     texinfo_document   |     []                    [] []              []  |
+     tigervnc           | []  []  []                []             []  []  |
+     tin                | []  []                          []           []  |
+     tin-man            |                []                                |
+     tracgoogleappsa... | []  []                    []             []  []  |
+     trader             | []  []         []         []             []  []  |
+     util-linux         | []  []                       []              []  |
+     ve                 |     []                    [] []          []  []  |
+     vice               | ()  ()                                       ()  |
+     vmm                |     []                                   []      |
+     vorbis-tools       | []  []                    []                 []  |
+     wastesedge         | []                                               |
+     wcd                |     []                    [] []          []      |
+     wcd-man            |     []                                           |
+     wdiff              | []  []                    [] [] []       []  []  |
+     wget               |     []                    [] [] []       []  []  |
+     wyslij-po          |     []                    []             []  []  |
+     xboard             | []  []                       []              []  |
+     xdg-user-dirs      | []  []  []                [] [] [] [] [] []  []  |
+     xkeyboard-config   | []  []  []                [] []          []  []  |
+                        +--------------------------------------------------+
+                          da  de  el en en_GB en_ZA eo es et eu fa fi  fr 
+                          119 131 32  1   6     0   94 95 22 13  4 102 139
+
+                          ga gd gl gu he hi hr hu hy ia id is it ja ka kk
+                        +-------------------------------------------------+
+     a2ps               |                   []          []    [] []       |
+     aegis              |                                     []          |
+     anubis             |                   [] []       []    []          |
+     aspell             | []                []          []    [] []       |
+     bash               |                      []       []    [] []       |
+     bfd                |                               []       []       |
+     binutils           |                               []    [] []       |
+     bison              |                   []                            |
+     bison-runtime      | []    []          [] []    [] []    [] []       |
+     buzztrax           |                                                 |
+     ccd2cue            |                      []                         |
+     ccide              |                   [] []                         |
+     cflow              | []                []          []                |
+     clisp              |                                                 |
+     coreutils          |                      []                []       |
+     cpio               | []                [] []       []    [] []       |
+     cppi               |       []          [] []             [] []       |
+     cpplib             |                               []       []       |
+     cryptsetup         |                                     []          |
+     datamash           |                                                 |
+     denemo             |                                     []          |
+     dfarc              |                   [] []             []          |
+     dialog             | [] [] []          [] []    [] [] [] [] []       |
+     dico               |                                                 |
+     diffutils          |                      []       []    [] []       |
+     dink               |                      []                         |
+     direvent           |                      []                         |
+     doodle             | []                                  []          |
+     dos2unix           |                      []                []       |
+     dos2unix-man       |                                                 |
+     e2fsprogs          |                      []       []                |
+     enscript           | []                []          []                |
+     exif               |       []          []          [] [] [] []       |
+     fetchmail          |                               []    [] []       |
+     findutils          | []    []          [] []       []    [] []       |
+     flex               | []                                              |
+     freedink           |                   [] []       []    []          |
+     fusionforge        |                                                 |
+     gas                |                               []                |
+     gawk               |                               []    () []       |
+     gcal               |                                                 |
+     gcc                |                                                 |
+     gdbm               |                                                 |
+     gettext-examples   | []    []          [] []       []    [] []       |
+     gettext-runtime    | []    []          [] []       []    [] []       |
+     gettext-tools      |                               []    [] []       |
+     gjay               |       []                                        |
+     glunarclock        | []    []          [] []       []    []          |
+     gnubiff            |                      []       []    ()          |
+     gnubik             |       []          []                []          |
+     gnucash            |          () () ()    ()             ()          |
+     gnuchess           |                                                 |
+     gnulib             | []    []             []             [] []       |
+     gnunet             |                                                 |
+     gnunet-gtk         |                                                 |
+     gold               |                               []    []          |
+     gphoto2            |                      []       []    [] []       |
+     gprof              | []                   []       []    []          |
+     gramadoir          | []                   []       []                |
+     grep               | []    []          [] []       []    [] []       |
+     grub               |       []             []             []          |
+     gsasl              | []                [] []       []    []          |
+     gss                | []                [] []       []    []          |
+     gst-plugins-bad    |                   [] []       []                |
+     gst-plugins-base   |       []          [] []       []                |
+     gst-plugins-good   |       []          [] []       []    [] []       |
+     gst-plugins-ugly   |       []          [] []       []    [] []       |
+     gstreamer          |       []          [] []       []    []          |
+     gtick              | []    []             []       []    []          |
+     gtkam              |                      []       [] [] [] []       |
+     gtkspell           | []    []    []    [] [] []    [] [] [] []       |
+     guix               |                                                 |
+     guix-packages      |                                                 |
+     gutenprint         |       []             []             []          |
+     hello              | []    []          [] []       []                |
+     help2man           |                   []                [] []       |
+     help2man-texi      |                                                 |
+     hylafax            |                               []                |
+     idutils            |                      []       []                |
+     iso_15924          |       []             []    [] [] [] []          |
+     iso_3166           | []    [] [] [] [] [] []    [] [] [] [] []    [] |
+     iso_3166_2         |                               []    []          |
+     iso_4217           |                   [] []       [] [] [] []       |
+     iso_639            | []    [] []       [] []       [] [] [] []       |
+     iso_639_3          |       []                            []          |
+     iso_639_5          |                                                 |
+     jwhois             |       []             []       []    []          |
+     kbd                |                      []       []    []          |
+     klavaro            |       []          [] []             []       [] |
+     ld                 | []                            []    [] []       |
+     leafpad            | []    []    []    [] []       []    [] ()       |
+     libc               |       []          []          []    [] []       |
+     libexif            |                                     []          |
+     libextractor       |                                                 |
+     libgnutls          |                                     []          |
+     libgphoto2         |                                     [] []       |
+     libgphoto2_port    |                                     [] []       |
+     libgsasl           | []                   []       []    []          |
+     libiconv           | []    []          [] []       []    [] []       |
+     libidn             |                   [] []       []    []          |
+     liferea            |       []    []       []             [] []       |
+     lilypond           |                                     []          |
+     lordsawar          |                                                 |
+     lprng              |                               []                |
+     lynx               |                      []       []    [] []       |
+     m4                 | []    []          []          []       []       |
+     mailfromd          |                                                 |
+     mailutils          |                                                 |
+     make               |                   []          []    [] []       |
+     man-db             |                               []       []       |
+     man-db-manpages    |                               []       []       |
+     midi-instruments   |       []    []    [] [] []    [] [] [] []       |
+     minicom            |                      []       []       []       |
+     mkisofs            |                               []    []          |
+     myserver           |                                     []          |
+     nano               | []    []          [] []             [] []       |
+     opcodes            | []                            []    []          |
+     parted             |       []             []       []    [] []       |
+     pies               |                                                 |
+     pnmixer            |                   []                []          |
+     popt               | []    [] []       [] []    [] [] [] [] []       |
+     procps-ng          |                                                 |
+     procps-ng-man      |                                                 |
+     psmisc             |                   [] []       []    []          |
+     pspp               |       []                               []       |
+     pushover           |                                     []          |
+     pwdutils           |                               []                |
+     pyspread           |                                                 |
+     radius             |                               []                |
+     recode             | []    []    []    [] []       []    []          |
+     recutils           |                                                 |
+     rpm                |                               []                |
+     rush               |       []                                        |
+     sarg               |                                                 |
+     sed                | []    []          [] []       []    [] []       |
+     sharutils          |                                                 |
+     shishi             |                                                 |
+     skribilo           |                      []                         |
+     solfege            |       []                            []          |
+     solfege-manual     |                                                 |
+     spotmachine        |                                                 |
+     sudo               |       []          []                [] []       |
+     sudoers            |                   []                [] []       |
+     sysstat            |                   [] []       []       []       |
+     tar                | []                [] []       []    [] []       |
+     texinfo            |                   []          []    []          |
+     texinfo_document   |                   [] []             []          |
+     tigervnc           |                                                 |
+     tin                |                                                 |
+     tin-man            |                                                 |
+     tracgoogleappsa... |       []    []    [] []                         |
+     trader             |                   [] []                         |
+     util-linux         |                                        []       |
+     ve                 |                                     []          |
+     vice               |                      ()             ()          |
+     vmm                |                                                 |
+     vorbis-tools       |                   []          []                |
+     wastesedge         |                                     []          |
+     wcd                |                                                 |
+     wcd-man            |                                                 |
+     wdiff              |       []             []             []          |
+     wget               |                   [] []             [] []       |
+     wyslij-po          |       []          []          []                |
+     xboard             |                                                 |
+     xdg-user-dirs      | [] [] [] [] [] [] [] []    [] [] [] [] []    [] |
+     xkeyboard-config   |       []          [] []       []    [] []       |
+                        +-------------------------------------------------+
+                          ga gd gl gu he hi hr hu hy ia id is it ja ka kk
+                          35  2 47  4  8  2 60 71  2  6 81 11 87 57  0  3
+
+                          kn ko ku ky lg lt lv mk ml mn mr ms mt nb ne nl 
+                        +--------------------------------------------------+
+     a2ps               |                                  []          []  |
+     aegis              |                                              []  |
+     anubis             |                                  []    []    []  |
+     aspell             |                            []                []  |
+     bash               |                                        []    []  |
+     bfd                |                                                  |
+     binutils           |                                                  |
+     bison              |                                              []  |
+     bison-runtime      |          []    [] []             []    []    []  |
+     buzztrax           |                                                  |
+     ccd2cue            |                                                  |
+     ccide              |                   []                         []  |
+     cflow              |                                              []  |
+     clisp              |                                              []  |
+     coreutils          |                                        []    []  |
+     cpio               |                                              []  |
+     cppi               |                                                  |
+     cpplib             |                                              []  |
+     cryptsetup         |                                              []  |
+     datamash           |                                        []    []  |
+     denemo             |                                                  |
+     dfarc              |                      []                      []  |
+     dialog             |       []       [] []             []    []    []  |
+     dico               |                                                  |
+     diffutils          |                   []                   []    []  |
+     dink               |                                              []  |
+     direvent           |                                              []  |
+     doodle             |                                              []  |
+     dos2unix           |                                        []    []  |
+     dos2unix-man       |                                              []  |
+     e2fsprogs          |                                              []  |
+     enscript           |                                              []  |
+     exif               |    []             []                         []  |
+     fetchmail          |                                              []  |
+     findutils          |                                        []    []  |
+     flex               |                                              []  |
+     freedink           |                                        []    []  |
+     fusionforge        |                                                  |
+     gas                |                                                  |
+     gawk               |                                              []  |
+     gcal               |                                                  |
+     gcc                |                                                  |
+     gdbm               |                                                  |
+     gettext-examples   |          []       []             [] [] []    []  |
+     gettext-runtime    |    []                                  []    []  |
+     gettext-tools      |    []                                            |
+     gjay               |                                                  |
+     glunarclock        |                   []                         []  |
+     gnubiff            |                                              []  |
+     gnubik             |                                        []    []  |
+     gnucash            | () ()          () ()          ()       () () []  |
+     gnuchess           |                                        []    []  |
+     gnulib             |                                              []  |
+     gnunet             |                                                  |
+     gnunet-gtk         |                                                  |
+     gold               |                                                  |
+     gphoto2            |                                              []  |
+     gprof              |                                  []          []  |
+     gramadoir          |                                              []  |
+     grep               |                                        []    []  |
+     grub               |                []                      []    []  |
+     gsasl              |                                              []  |
+     gss                |                                                  |
+     gst-plugins-bad    |                   []                   []    []  |
+     gst-plugins-base   |                   []                   []    []  |
+     gst-plugins-good   |                [] []                   []    []  |
+     gst-plugins-ugly   |                   []             [] [] []    []  |
+     gstreamer          |                []                      []    []  |
+     gtick              |                                              []  |
+     gtkam              |                                        []    []  |
+     gtkspell           |          []    [] []       []    []    []    []  |
+     guix               |                                                  |
+     guix-packages      |                                                  |
+     gutenprint         |                                              []  |
+     hello              |                   []                   []    []  |
+     help2man           |                                        []        |
+     help2man-texi      |                                                  |
+     hylafax            |                                              []  |
+     idutils            |                                              []  |
+     iso_15924          |                () []                         []  |
+     iso_3166           | [] [] []       () [] [] []    []       []    []  |
+     iso_3166_2         |                ()                            []  |
+     iso_4217           |                () []                   []    []  |
+     iso_639            | [] []          () []    []    []             []  |
+     iso_639_3          | []             ()             []                 |
+     iso_639_5          |                ()                                |
+     jwhois             |                   []                         []  |
+     kbd                |                                              []  |
+     klavaro            |                                        []    []  |
+     ld                 |                                                  |
+     leafpad            |    []    []    [] []                         []  |
+     libc               |    []                                        []  |
+     libexif            |                                              []  |
+     libextractor       |                                              []  |
+     libgnutls          |                                  []          []  |
+     libgphoto2         |                                              []  |
+     libgphoto2_port    |                                              []  |
+     libgsasl           |                                              []  |
+     libiconv           |                []                            []  |
+     libidn             |                                              []  |
+     liferea            |                [] []                         []  |
+     lilypond           |                                              []  |
+     lordsawar          |                                                  |
+     lprng              |                                                  |
+     lynx               |                                              []  |
+     m4                 |                                              []  |
+     mailfromd          |                                                  |
+     mailutils          |                                                  |
+     make               |    []                                        []  |
+     man-db             |                                              []  |
+     man-db-manpages    |                                              []  |
+     midi-instruments   |    [] []       []          []    []       [] []  |
+     minicom            |                                        []        |
+     mkisofs            |                                              []  |
+     myserver           |                                                  |
+     nano               |                                  []    []    []  |
+     opcodes            |                                              []  |
+     parted             |    []                                        []  |
+     pies               |                                                  |
+     pnmixer            |                                              []  |
+     popt               | [] []             []                   []    []  |
+     procps-ng          |                                                  |
+     procps-ng-man      |                                                  |
+     psmisc             |                                              []  |
+     pspp               |                []                            []  |
+     pushover           |                                                  |
+     pwdutils           |                                              []  |
+     pyspread           |                                                  |
+     radius             |                                              []  |
+     recode             |                                        []    []  |
+     recutils           |                                              []  |
+     rpm                |                                              []  |
+     rush               |                                              []  |
+     sarg               |                                                  |
+     sed                |                                        []    []  |
+     sharutils          |                                              []  |
+     shishi             |                                                  |
+     skribilo           |                                                  |
+     solfege            |                                        []    []  |
+     solfege-manual     |                                              []  |
+     spotmachine        |                                              []  |
+     sudo               |    []                                  []    []  |
+     sudoers            |    []                                  []    []  |
+     sysstat            |                                        []    []  |
+     tar                |          []                            []    []  |
+     texinfo            |                                              []  |
+     texinfo_document   |                                              []  |
+     tigervnc           |                                              []  |
+     tin                |                                                  |
+     tin-man            |                                                  |
+     tracgoogleappsa... |                   []                   []    []  |
+     trader             |                                        []        |
+     util-linux         |                                              []  |
+     ve                 |                                              []  |
+     vice               |                                              []  |
+     vmm                |                                              []  |
+     vorbis-tools       |                                              []  |
+     wastesedge         |                                              []  |
+     wcd                |                                              []  |
+     wcd-man            |                                              []  |
+     wdiff              |                                              []  |
+     wget               |                                        []    []  |
+     wyslij-po          |                                              []  |
+     xboard             |                                              []  |
+     xdg-user-dirs      | [] [] [] []    [] [] [] []    []       []    []  |
+     xkeyboard-config   |    []          []                            []  |
+                        +--------------------------------------------------+
+                          kn ko ku ky lg lt lv mk ml mn mr ms mt nb ne nl 
+                           5 15  4  6  0 13 23  3  3  3  4 11  2 42  1 125
+
+                          nn or pa pl  ps pt pt_BR ro ru rw sk sl sq sr 
+                        +------------------------------------------------+
+     a2ps               |          []     []  []   [] []       []    []  |
+     aegis              |                     []      []                 |
+     anubis             |          []                 []             []  |
+     aspell             |          []         []   [] []    [] []    []  |
+     bash               |          []         []      []    [] []    []  |
+     bfd                |                             []             []  |
+     binutils           |                             []             []  |
+     bison              |          []         []                     []  |
+     bison-runtime      |          []     []  []   [] []       [] [] []  |
+     buzztrax           |                     []                         |
+     ccd2cue            |                     []                     []  |
+     ccide              |          []                 []             []  |
+     cflow              |          []         []                     []  |
+     clisp              |                             []                 |
+     coreutils          |          []                 []       []    []  |
+     cpio               |          []                 []             []  |
+     cppi               |          []         []                     []  |
+     cpplib             |                     []      []             []  |
+     cryptsetup         |          []         []                     []  |
+     datamash           |                     []                     []  |
+     denemo             |                                                |
+     dfarc              |          []         []                     []  |
+     dialog             |          []         []   [] []    [] []    []  |
+     dico               |          []                                    |
+     diffutils          |          []         []                     []  |
+     dink               |                                                |
+     direvent           |          []         []                     []  |
+     doodle             |                                         [] []  |
+     dos2unix           |          []         []      []             []  |
+     dos2unix-man       |          []         []                         |
+     e2fsprogs          |          []                                    |
+     enscript           |          []         []   [] []       []    []  |
+     exif               |          []         []   [] []    []       []  |
+     fetchmail          |          []                 []          []     |
+     findutils          |          []         []      []    [] []    []  |
+     flex               |          []         []   [] []             []  |
+     freedink           |          []         []      []       []    []  |
+     fusionforge        |                                                |
+     gas                |                                                |
+     gawk               |          []                                    |
+     gcal               |                                                |
+     gcc                |                                                |
+     gdbm               |          []         []                     []  |
+     gettext-examples   |          []     []  []   [] []    [] []    []  |
+     gettext-runtime    | []       []     []  []   [] []    [] []    []  |
+     gettext-tools      |          []         []   [] []    [] []    []  |
+     gjay               |                                            []  |
+     glunarclock        |          []         []   []       [] []    []  |
+     gnubiff            |                                            []  |
+     gnubik             |          []         []               []    []  |
+     gnucash            |          ()     ()  ()   () ()             []  |
+     gnuchess           |                     []                     []  |
+     gnulib             |          []         []      []       []    []  |
+     gnunet             |                                                |
+     gnunet-gtk         |                                                |
+     gold               |                                                |
+     gphoto2            |          []         []   [] []             []  |
+     gprof              |                     []   [] []             []  |
+     gramadoir          |                                   []       []  |
+     grep               |          []         []      []    [] []    []  |
+     grub               |          []         []      []       []    []  |
+     gsasl              |          []                       []       []  |
+     gss                |          []              []       []       []  |
+     gst-plugins-bad    |          []         []      []    []       []  |
+     gst-plugins-base   |          []         []      []    [] []    []  |
+     gst-plugins-good   |          []         []   [] []    [] []    []  |
+     gst-plugins-ugly   |          []         []   [] []    [] []    []  |
+     gstreamer          |          []         []   [] []    [] []    []  |
+     gtick              |          []         []      []    []       []  |
+     gtkam              |       [] []         []      []    []       []  |
+     gtkspell           |          []     []  []   [] []    [] [] [] []  |
+     guix               |                                                |
+     guix-packages      |                                                |
+     gutenprint         |                                   [] []        |
+     hello              |          []         []      []    [] []    []  |
+     help2man           |          []         []      []             []  |
+     help2man-texi      |          []                                    |
+     hylafax            |                                                |
+     idutils            |          []                 []             []  |
+     iso_15924          |          []     ()       [] []       []    []  |
+     iso_3166           | [] [] [] []     ()  []   [] [] [] [] [] [] []  |
+     iso_3166_2         |          []     ()                         []  |
+     iso_4217           | []       []     ()       [] [] []    []    []  |
+     iso_639            |    [] [] []     ()       [] [] [] [] []    []  |
+     iso_639_3          |       []        ()                             |
+     iso_639_5          |                 ()                         []  |
+     jwhois             |          []         []   []                []  |
+     kbd                |          []                 []                 |
+     klavaro            |       [] []         []      []       []        |
+     ld                 |                                                |
+     leafpad            | []       []     []  []      []    [] []    []  |
+     libc               |          []                 []    []           |
+     libexif            |          []         ()            []           |
+     libextractor       |          []                                    |
+     libgnutls          |          []                                    |
+     libgphoto2         |          []                                    |
+     libgphoto2_port    |          []         []      []    []       []  |
+     libgsasl           |          []              []       []       []  |
+     libiconv           |          []         []            [] []    []  |
+     libidn             |          []         []                     []  |
+     liferea            |          []     []  []   [] ()    []    []     |
+     lilypond           |                                                |
+     lordsawar          |                                                |
+     lprng              |          []                                    |
+     lynx               |                     []      []                 |
+     m4                 |          []         []   [] []             []  |
+     mailfromd          |          []                                    |
+     mailutils          |          []                                    |
+     make               |          []         []      []                 |
+     man-db             |          []                 []             []  |
+     man-db-manpages    |          []                 []             []  |
+     midi-instruments   |          []     []  []   [] []    [] []    []  |
+     minicom            |          []         []   [] []                 |
+     mkisofs            |          []                 []             []  |
+     myserver           |                                      []    []  |
+     nano               |          []         []   [] []       []    []  |
+     opcodes            |                                                |
+     parted             |          []         []      []    [] []    []  |
+     pies               |          []                                    |
+     pnmixer            |                             []                 |
+     popt               |          []     []  []      []       []    []  |
+     procps-ng          |          []                                    |
+     procps-ng-man      |          []                                    |
+     psmisc             |          []         []      []             []  |
+     pspp               |          []                 []                 |
+     pushover           |                                                |
+     pwdutils           |          []                                    |
+     pyspread           | []                  []                         |
+     radius             |          []                 []                 |
+     recode             |          []     []  []   [] []    [] []    []  |
+     recutils           |                     []                     []  |
+     rpm                |          []                                    |
+     rush               |          []         []                     []  |
+     sarg               |                     []      []                 |
+     sed                |          []     []  []   [] []    [] []    []  |
+     sharutils          |          []         []                     []  |
+     shishi             |          []                                []  |
+     skribilo           |                                            []  |
+     solfege            |          []         []      []                 |
+     solfege-manual     |          []         []                         |
+     spotmachine        |                     []                     []  |
+     sudo               |          []         []      []    [] []    []  |
+     sudoers            |          []         []               []    []  |
+     sysstat            |          []         []      []    []       []  |
+     tar                |          []         []      []       []    []  |
+     texinfo            |          []         []      []                 |
+     texinfo_document   |          []         []                         |
+     tigervnc           |                     []      []             []  |
+     tin                |                             []                 |
+     tin-man            |                                                |
+     tracgoogleappsa... |          []         []      []             []  |
+     trader             |                             []             []  |
+     util-linux         |          []         []                         |
+     ve                 |          []         []                     []  |
+     vice               |                                                |
+     vmm                |                                                |
+     vorbis-tools       |          []                          []    []  |
+     wastesedge         |                                                |
+     wcd                |                                                |
+     wcd-man            |                                                |
+     wdiff              |          []         []      []       []    []  |
+     wget               |          []         []      []    []       []  |
+     wyslij-po          | []       []         []                     []  |
+     xboard             |          []                 []             []  |
+     xdg-user-dirs      | [] [] [] []  [] []  []   [] []    [] [] [] []  |
+     xkeyboard-config   |          []         []      []       []        |
+                        +------------------------------------------------+
+                          nn or pa pl  ps pt pt_BR ro ru rw sk sl sq sr 
+                           7  3  6 114  1 12  88   32 82  3 40 45  7 101
+
+                          sv  sw ta te tg th tr uk  ur vi  wa wo zh_CN
+                        +----------------------------------------------+
+     a2ps               | []              [] [] []     []              |
+     aegis              |                              []              |
+     anubis             | []                 [] []     []              |
+     aspell             | []                    []     []  []     []   |
+     bash               | []                    []     []         []   |
+     bfd                | []                    []     []              |
+     binutils           | []                    []     []              |
+     bison              | []                    []     []         []   |
+     bison-runtime      | []              [] [] []     []         []   |
+     buzztrax           | []                           []         []   |
+     ccd2cue            |                       []     []         []   |
+     ccide              | []                    []     []         []   |
+     cflow              | []                    []     []         []   |
+     clisp              |                                              |
+     coreutils          | []                    []     []              |
+     cpio               | []                 [] []     []         []   |
+     cppi               | []                    []     []         []   |
+     cpplib             | []                 [] []     []         []   |
+     cryptsetup         |                       []     []         []   |
+     datamash           | []                    []     []              |
+     denemo             |                                         []   |
+     dfarc              | []                           []              |
+     dialog             | []  []          []           []  []     []   |
+     dico               |                       []                     |
+     diffutils          | []                 [] []     []         []   |
+     dink               | []                                           |
+     direvent           |                       []     []              |
+     doodle             | []                           []              |
+     dos2unix           | []                    []     []         []   |
+     dos2unix-man       | []                    []                []   |
+     e2fsprogs          | []                    []     []         []   |
+     enscript           | []                 [] []     []              |
+     exif               | []                 [] []     []         []   |
+     fetchmail          | []                 []        []         []   |
+     findutils          | []                 [] []     []         []   |
+     flex               | []                 []        []         []   |
+     freedink           | []              []           []              |
+     fusionforge        |                                              |
+     gas                |                       []                     |
+     gawk               | []                           []         []   |
+     gcal               | []                 []                   []   |
+     gcc                | []                                           |
+     gdbm               |                       []     []              |
+     gettext-examples   | []                 [] []     []         []   |
+     gettext-runtime    | []                 [] []     []         []   |
+     gettext-tools      | []                 [] []     []         []   |
+     gjay               |                 []           []         []   |
+     glunarclock        | []                           []  []     []   |
+     gnubiff            | []                           []              |
+     gnubik             | []                    []     []         []   |
+     gnucash            |        () ()              () ()         []   |
+     gnuchess           |                       []     []         []   |
+     gnulib             | []                    []     []         []   |
+     gnunet             |                                              |
+     gnunet-gtk         |                                              |
+     gold               |                       []     []              |
+     gphoto2            | []                    []     []         []   |
+     gprof              | []                 [] []     []              |
+     gramadoir          | []                           []         []   |
+     grep               | []              []    []     []         []   |
+     grub               | []                 [] []     []              |
+     gsasl              | []                    []     []         []   |
+     gss                | []                           []         []   |
+     gst-plugins-bad    | []                 [] []     []         []   |
+     gst-plugins-base   | []                 [] []     []         []   |
+     gst-plugins-good   | []                 [] []     []         []   |
+     gst-plugins-ugly   | []                 [] []     []         []   |
+     gstreamer          | []                 [] []     []         []   |
+     gtick              |                       []     []         []   |
+     gtkam              | []                    []     []         []   |
+     gtkspell           | []              [] [] []     []  []     []   |
+     guix               |                                              |
+     guix-packages      |                                              |
+     gutenprint         |                    [] []     []         []   |
+     hello              | []              [] [] []     []         []   |
+     help2man           |                       []     []         []   |
+     help2man-texi      |                       []                     |
+     hylafax            |                              []              |
+     idutils            |                       []     []         []   |
+     iso_15924          | []              () [] []     ()         []   |
+     iso_3166           | []        []    () [] []     ()  []     []   |
+     iso_3166_2         |                 () [] []     ()         []   |
+     iso_4217           | []              () [] []     ()         []   |
+     iso_639            | []     [] []    () [] []     ()  []     []   |
+     iso_639_3          |        []       () [] []     ()              |
+     iso_639_5          |                 ()    []     ()              |
+     jwhois             | []                 []        []         []   |
+     kbd                | []                    []     []         []   |
+     klavaro            | []                    []  [] []     []  []   |
+     ld                 | []                 [] []     []         []   |
+     leafpad            | []              [] [] []     []         []   |
+     libc               | []                 [] []     []         []   |
+     libexif            | []                           []         ()   |
+     libextractor       |                       []     []              |
+     libgnutls          | []                    []     []         []   |
+     libgphoto2         | []                    []     []              |
+     libgphoto2_port    | []                    []     []         []   |
+     libgsasl           | []                    []     []         []   |
+     libiconv           | []                    []     []  []     []   |
+     libidn             | ()                    []     []         []   |
+     liferea            | []                 [] []     []         []   |
+     lilypond           |                              []              |
+     lordsawar          |                                              |
+     lprng              |                              []              |
+     lynx               | []                 [] []     []              |
+     m4                 | []                           []         []   |
+     mailfromd          |                       []     []              |
+     mailutils          |                              []              |
+     make               | []                    []     []         []   |
+     man-db             | []                           []         []   |
+     man-db-manpages    | []                                      []   |
+     midi-instruments   | []              [] [] []     []         []   |
+     minicom            | []                           []              |
+     mkisofs            |                       []     []         []   |
+     myserver           |                              []              |
+     nano               | []                    []     []         []   |
+     opcodes            |                       []     []         []   |
+     parted             | []                 [] []     []         []   |
+     pies               |                       []     []              |
+     pnmixer            |                       []     []         []   |
+     popt               | []     []       [] [] []     []         []   |
+     procps-ng          |                       []     []              |
+     procps-ng-man      |                       []                     |
+     psmisc             | []                    []     []         []   |
+     pspp               |                    [] []                []   |
+     pushover           | []                                           |
+     pwdutils           | []                           []              |
+     pyspread           |                       []                     |
+     radius             |                       []     []              |
+     recode             | []                 []        []         []   |
+     recutils           | []                    []     []              |
+     rpm                | []                    []     []         []   |
+     rush               |                       []     []              |
+     sarg               |                                              |
+     sed                | []                 [] []     []         []   |
+     sharutils          | []                    []     []         []   |
+     shishi             |                              []         []   |
+     skribilo           | []                    []                     |
+     solfege            | []                 []        []         []   |
+     solfege-manual     |                    []                        |
+     spotmachine        | []                    []     []              |
+     sudo               | []                 [] []     []         []   |
+     sudoers            | []                    []     []         []   |
+     sysstat            | []                 [] []     []         []   |
+     tar                | []                 [] []     []         []   |
+     texinfo            |                    [] []     []              |
+     texinfo_document   |                       []                     |
+     tigervnc           | []                    []                []   |
+     tin                |                                         []   |
+     tin-man            |                                              |
+     tracgoogleappsa... | []              []    []     []         []   |
+     trader             | []                                           |
+     util-linux         | []                    []     []         []   |
+     ve                 | []                    []     []         []   |
+     vice               | ()                 ()                        |
+     vmm                |                                              |
+     vorbis-tools       | []                           []              |
+     wastesedge         |                                              |
+     wcd                |                       []     []         []   |
+     wcd-man            |                       []                     |
+     wdiff              | []                    []     []         []   |
+     wget               |                       []     []         []   |
+     wyslij-po          |                       []     []              |
+     xboard             |                       []                []   |
+     xdg-user-dirs      | []     [] []    [] [] []     []         []   |
+     xkeyboard-config   | []                 [] []     []              |
+                        +----------------------------------------------+
+                          sv  sw ta te tg th tr uk  ur vi  wa wo zh_CN
+                          106  1  4  3  0 13 51 115  1 125  7  1  100 
+
+                          zh_HK zh_TW
+                        +-------------+
+     a2ps               |             | 30
+     aegis              |             |  9
+     anubis             |             | 19
+     aspell             |             | 29
+     bash               |        []   | 23
+     bfd                |             | 11
+     binutils           |             | 12
+     bison              |        []   | 18
+     bison-runtime      |        []   | 38
+     buzztrax           |             |  9
+     ccd2cue            |             | 10
+     ccide              |             | 17
+     cflow              |             | 16
+     clisp              |             | 10
+     coreutils          |             | 18
+     cpio               |             | 20
+     cppi               |             | 17
+     cpplib             |        []   | 19
+     cryptsetup         |             | 14
+     datamash           |             | 11
+     denemo             |             |  5
+     dfarc              |             | 17
+     dialog             |        []   | 42
+     dico               |             |  6
+     diffutils          |             | 22
+     dink               |             | 10
+     direvent           |             | 11
+     doodle             |             | 12
+     dos2unix           |        []   | 18
+     dos2unix-man       |             |  9
+     e2fsprogs          |             | 15
+     enscript           |             | 21
+     exif               |             | 27
+     fetchmail          |             | 19
+     findutils          |             | 29
+     flex               |        []   | 19
+     freedink           |             | 24
+     fusionforge        |             |  3
+     gas                |             |  5
+     gawk               |             | 13
+     gcal               |             |  8
+     gcc                |             |  2
+     gdbm               |             | 10
+     gettext-examples   |  []    []   | 40
+     gettext-runtime    |  []    []   | 35
+     gettext-tools      |        []   | 24
+     gjay               |             |  9
+     glunarclock        |        []   | 27
+     gnubiff            |             |  9
+     gnubik             |             | 19
+     gnucash            |        ()   |  6
+     gnuchess           |             | 11
+     gnulib             |             | 23
+     gnunet             |             |  1
+     gnunet-gtk         |             |  1
+     gold               |             |  7
+     gphoto2            |        []   | 19
+     gprof              |             | 21
+     gramadoir          |             | 14
+     grep               |        []   | 31
+     grub               |             | 21
+     gsasl              |        []   | 19
+     gss                |             | 17
+     gst-plugins-bad    |             | 21
+     gst-plugins-base   |             | 27
+     gst-plugins-good   |             | 32
+     gst-plugins-ugly   |             | 34
+     gstreamer          |        []   | 32
+     gtick              |             | 19
+     gtkam              |             | 24
+     gtkspell           |  []    []   | 48
+     guix               |             |  2
+     guix-packages      |             |  0
+     gutenprint         |             | 15
+     hello              |        []   | 30
+     help2man           |             | 18
+     help2man-texi      |             |  5
+     hylafax            |             |  5
+     idutils            |             | 14
+     iso_15924          |        []   | 23
+     iso_3166           |  []    []   | 58
+     iso_3166_2         |             |  9
+     iso_4217           |  []    []   | 28
+     iso_639            |  []    []   | 46
+     iso_639_3          |             | 10
+     iso_639_5          |             |  2
+     jwhois             |        []   | 20
+     kbd                |             | 17
+     klavaro            |             | 30
+     ld                 |        []   | 15
+     leafpad            |        []   | 39
+     libc               |        []   | 24
+     libexif            |             | 10
+     libextractor       |             |  5
+     libgnutls          |             | 13
+     libgphoto2         |             | 10
+     libgphoto2_port    |        []   | 19
+     libgsasl           |             | 18
+     libiconv           |        []   | 29
+     libidn             |             | 17
+     liferea            |             | 29
+     lilypond           |             | 11
+     lordsawar          |             |  3
+     lprng              |             |  3
+     lynx               |             | 19
+     m4                 |        []   | 22
+     mailfromd          |             |  4
+     mailutils          |             |  6
+     make               |             | 19
+     man-db             |             | 15
+     man-db-manpages    |             | 10
+     midi-instruments   |        []   | 43
+     minicom            |        []   | 17
+     mkisofs            |             | 13
+     myserver           |             |  9
+     nano               |        []   | 30
+     opcodes            |             | 12
+     parted             |        []   | 23
+     pies               |             |  4
+     pnmixer            |             |  9
+     popt               |        []   | 36
+     procps-ng          |             |  5
+     procps-ng-man      |             |  4
+     psmisc             |        []   | 22
+     pspp               |             | 13
+     pushover           |             |  6
+     pwdutils           |             |  8
+     pyspread           |             |  6
+     radius             |             |  9
+     recode             |             | 31
+     recutils           |             | 10
+     rpm                |        []   | 13
+     rush               |             | 10
+     sarg               |             |  4
+     sed                |        []   | 35
+     sharutils          |             | 13
+     shishi             |             |  7
+     skribilo           |             |  7
+     solfege            |             | 21
+     solfege-manual     |             |  9
+     spotmachine        |             | 11
+     sudo               |             | 26
+     sudoers            |             | 22
+     sysstat            |             | 23
+     tar                |        []   | 30
+     texinfo            |             | 17
+     texinfo_document   |             | 13
+     tigervnc           |             | 14
+     tin                |        []   |  7
+     tin-man            |             |  1
+     tracgoogleappsa... |        []   | 22
+     trader             |             | 12
+     util-linux         |             | 13
+     ve                 |             | 14
+     vice               |             |  1
+     vmm                |             |  3
+     vorbis-tools       |             | 13
+     wastesedge         |             |  3
+     wcd                |             |  8
+     wcd-man            |             |  3
+     wdiff              |        []   | 23
+     wget               |             | 21
+     wyslij-po          |             | 14
+     xboard             |             | 10
+     xdg-user-dirs      |  []    []   | 68
+     xkeyboard-config   |        []   | 28
+                        +-------------+
+       89 teams           zh_HK zh_TW
+      166 domains           7    42    2809
+
+   Some counters in the preceding matrix are higher than the number of
+visible blocks let us expect.  This is because a few extra PO files are
+used for implementing regional variants of languages, or language
+dialects.
+
+   For a PO file in the matrix above to be effective, the package to
+which it applies should also have been internationalized and distributed
+as such by its maintainer.  There might be an observable lag between the
+mere existence a PO file and its wide availability in a distribution.
+
+   If Jun 2014 seems to be old, you may fetch a more recent copy of this
+'ABOUT-NLS' file on most GNU archive sites.  The most up-to-date matrix
+with full percentage details can be found at
+'http://translationproject.org/extra/matrix.html'.
+
+1.5 Using 'gettext' in new packages
+===================================
+
+If you are writing a freely available program and want to
+internationalize it you are welcome to use GNU 'gettext' in your
+package.  Of course you have to respect the GNU Lesser General Public
+License which covers the use of the GNU 'gettext' library.  This means
+in particular that even non-free programs can use 'libintl' as a shared
+library, whereas only free software can use 'libintl' as a static
+library or use modified versions of 'libintl'.
+
+   Once the sources are changed appropriately and the setup can handle
+the use of 'gettext' the only thing missing are the translations.  The
+Free Translation Project is also available for packages which are not
+developed inside the GNU project.  Therefore the information given above
+applies also for every other Free Software Project.  Contact
+'coordinator@translationproject.org' to make the '.pot' files available
+to the translation teams.
diff --git a/AUTHORS b/AUTHORS
new file mode 100644
index 0000000..9ad0ba2
--- /dev/null
+++ b/AUTHORS
@@ -0,0 +1,466 @@
+#
+# Master author manifest for bash
+#
+# The files in lib/intl were taken from the GNU gettext distribution.
+#
+# Any files appearing in the bash distribution not listed in this file
+# were created by Chet Ramey.
+#
+# Filename	authors (first is original author)
+#
+README		Brian Fox, Chet Ramey
+INSTALL		Brian Fox, Chet Ramey
+COPYING		Brian Fox, Chet Ramey
+MANIFEST	Brian Fox, Chet Ramey
+configure	Chet Ramey
+Makefile.in	Brian Fox, Chet Ramey
+configure.in	Chet Ramey
+aclocal.m4	Chet Ramey
+config.h.top	Chet Ramey
+config.h.bot	Chet Ramey
+config.h.in	Chet Ramey
+array.c		Chet Ramey
+print_cmd.c	Brian Fox, Chet Ramey
+general.c	Brian Fox, Chet Ramey
+variables.c	Brian Fox, Chet Ramey
+make_cmd.c	Brian Fox, Chet Ramey
+copy_cmd.c	Brian Fox, Chet Ramey
+unwind_prot.c	Brian Fox, Chet Ramey
+dispose_cmd.c	Brian Fox, Chet Ramey
+getcwd.c	Roland McGrath, Brian Fox, Chet Ramey
+bashhist.c	Chet Ramey
+hash.c		Brian Fox, Chet Ramey
+parse.y		Brian Fox, Chet Ramey
+subst.c		Brian Fox, Chet Ramey
+shell.c		Brian Fox, Chet Ramey
+sig.c		Chet Ramey
+trap.c		Brian Fox, Chet Ramey
+siglist.c	Brian Fox, Chet Ramey
+version.c	Brian Fox, Chet Ramey
+flags.c		Brian Fox, Chet Ramey
+jobs.c		Brian Fox, Chet Ramey
+input.c		Chet Ramey
+mailcheck.c	Brian Fox, Chet Ramey
+pathexp.c	Chet Ramey
+test.c		Brian Fox, Chet Ramey
+expr.c		Chet Ramey, Brian Fox
+alias.c		Brian Fox, Chet Ramey
+execute_cmd.c	Brian Fox, Chet Ramey
+bashline.c	Brian Fox, Chet Ramey
+braces.c	Brian Fox, Chet Ramey
+bracecomp.c	Brian Fox, Chet Ramey, Tom Tromey
+nojobs.c	Brian Fox, Chet Ramey
+vprint.c	Chet Ramey
+oslib.c		Chet Ramey
+error.c		Brian Fox, Chet Ramey
+xmalloc.c	Brian Fox, Chet Ramey
+alias.h		Brian Fox, Chet Ramey
+array.h		Chet Ramey
+builtins.h	Brian Fox, Chet Ramey
+parser.h	Brian Fox, Chet Ramey
+variables.h	Brian Fox, Chet Ramey
+machines.h	Brian Fox, Chet Ramey
+jobs.h		Brian Fox, Chet Ramey
+maxpath.h	Brian Fox, Chet Ramey
+pathexp.h	Chet Ramey
+mailcheck.h	Chet Ramey
+filecntl.h	Brian Fox, Chet Ramey
+hash.h		Brian Fox, Chet Ramey
+quit.h		Brian Fox, Chet Ramey
+flags.h		Brian Fox, Chet Ramey
+shell.h		Brian Fox, Chet Ramey
+bashjmp.h	Chet Ramey
+sig.h		Chet Ramey
+trap.h		Brian Fox, Chet Ramey
+general.h	Brian Fox, Chet Ramey
+unwind_prot.h	Brian Fox, Chet Ramey
+input.h		Brian Fox, Chet Ramey
+error.h		Brian Fox, Chet Ramey
+command.h	Brian Fox, Chet Ramey
+externs.h	Chet Ramey
+siglist.h	Chet Ramey
+subst.h		Brian Fox, Chet Ramey
+dispose_cmd.h	Brian Fox, Chet Ramey
+bashansi.h	Brian Fox, Chet Ramey
+make_cmd.h	Brian Fox, Chet Ramey
+bashhist.h	Chet Ramey
+bashline.h	Chet Ramey
+execute_cmd.h	Chet Ramey
+bashtypes.h	Chet Ramey
+bashtty.h	Chet Ramey
+pathnames.h	Chet Ramey
+y.tab.c		Brian Fox, Chet Ramey
+y.tab.h		Brian Fox, Chet Ramey
+parser-built	Brian Fox, Chet Ramey
+posixstat.h	Brian Fox, Chet Ramey
+stdc.h		Chet Ramey
+ansi_stdlib.h	Brian Fox, Chet Ramey
+memalloc.h	Chet Ramey
+builtins/ChangeLog	Brian Fox, Chet Ramey
+builtins/Makefile.in	Brian Fox, Chet Ramey
+builtins/alias.def	Brian Fox, Chet Ramey
+builtins/bind.def	Brian Fox, Chet Ramey
+builtins/break.def	Brian Fox, Chet Ramey
+builtins/builtin.def	Brian Fox, Chet Ramey
+builtins/caller.def	Rocky Bernstein, Chet Ramey
+builtins/cd.def		Brian Fox, Chet Ramey
+builtins/colon.def	Brian Fox, Chet Ramey
+builtins/command.def	Brian Fox, Chet Ramey
+builtins/common.c	Brian Fox, Chet Ramey
+builtins/declare.def	Brian Fox, Chet Ramey
+builtins/echo.def	Brian Fox, Chet Ramey
+builtins/enable.def	Brian Fox, Chet Ramey
+builtins/eval.def	Brian Fox, Chet Ramey
+builtins/exec.def	Brian Fox, Chet Ramey
+builtins/exit.def	Brian Fox, Chet Ramey
+builtins/fc.def		Brian Fox, Chet Ramey
+builtins/fg_bg.def	Brian Fox, Chet Ramey
+builtins/getopt.c	Roland McGrath, Brian Fox, Chet Ramey
+builtins/getopt.h	Roland McGrath, Brian Fox, Chet Ramey
+builtins/getopts.def	Brian Fox, Chet Ramey
+builtins/hash.def	Brian Fox, Chet Ramey
+builtins/hashcom.h	Brian Fox, Chet Ramey
+builtins/help.def	Brian Fox, Chet Ramey
+builtins/let.def	Chet Ramey, Brian Fox
+builtins/history.def	Brian Fox, Chet Ramey
+builtins/jobs.def	Brian Fox, Chet Ramey
+builtins/kill.def	Brian Fox, Chet Ramey
+builtins/mapfile.def	Rocky Bernstein
+builtins/mkbuiltins.c	Brian Fox, Chet Ramey
+builtins/pushd.def	Brian Fox, Chet Ramey
+builtins/read.def	Brian Fox, Chet Ramey
+builtins/reserved.def	Brian Fox, Chet Ramey
+builtins/return.def	Brian Fox, Chet Ramey
+builtins/set.def	Brian Fox, Chet Ramey
+builtins/setattr.def	Brian Fox, Chet Ramey
+builtins/shift.def	Brian Fox, Chet Ramey
+builtins/shopt.def	Chet Ramey
+builtins/source.def	Brian Fox, Chet Ramey
+builtins/suspend.def	Brian Fox, Chet Ramey
+builtins/test.def	Brian Fox, Chet Ramey
+builtins/times.def	Brian Fox, Chet Ramey
+builtins/trap.def	Brian Fox, Chet Ramey
+builtins/type.def	Brian Fox, Chet Ramey
+builtins/ulimit.def	Chet Ramey, Brian Fox
+builtins/umask.def	Brian Fox, Chet Ramey
+builtins/wait.def	Brian Fox, Chet Ramey
+builtins/psize.c	Chet Ramey, Brian Fox
+builtins/psize.sh	Chet Ramey, Brian Fox
+builtins/inlib.def	Chet Ramey
+builtins/bashgetopt.c	Chet Ramey
+builtins/common.h	Chet Ramey
+builtins/bashgetopt.h	Chet Ramey
+lib/doc-support/texindex.c	bug-texinfo@prep.ai.mit.edu, Chet Ramey
+lib/doc-support/Makefile.in	Chet Ramey
+lib/doc-support/getopt.h	Roland McGrath
+lib/doc-support/getopt.c	Roland McGrath
+lib/doc-support/getopt1.c	Roland McGrath
+lib/glob/ChangeLog	Brian Fox, Chet Ramey
+lib/glob/Makefile.in	Brian Fox, Chet Ramey
+lib/glob/strmatch.c	Roland McGrath, Brian Fox, Chet Ramey
+lib/glob/strmatch.h	Roland McGrath, Brian Fox, Chet Ramey
+lib/glob/glob.c		Richard Stallman, Roland McGrath, Brian Fox, Chet Ramey
+lib/glob/glob.h		Chet Ramey
+lib/glob/ndir.h		Doug Gwyn, Richard Stallman
+lib/glob/doc/Makefile.in	Brian Fox, Chet Ramey
+lib/glob/doc/glob.texi	Brian Fox, Chet Ramey
+lib/malloc/Makefile.in	Chet Ramey
+lib/malloc/alloca.c	Doug Gwyn, Richard Stallman, Brian Fox, Chet Ramey
+lib/malloc/getpagesize.h	Brian Fox, Chet Ramey
+lib/malloc/malloc.c	Chris Kingsley, Mike Muuss, Richard Stallman, Brian Fox, Chet Ramey
+lib/malloc/gmalloc.c	Mike Haertel, Roland McGrath
+lib/malloc/stub.c	Chet Ramey
+lib/malloc/i386-alloca.s	Richard Stallman
+lib/malloc/x386-alloca.s	Chip Salzenberg, Richard Stallman
+lib/malloc/xmalloc.c	Brian Fox, Chet Ramey
+lib/posixheaders/posixstat.h	Brian Fox, Chet Ramey
+lib/posixheaders/ansi_stdlib.h	Brian Fox, Chet Ramey
+lib/posixheaders/stdc.h	Chet Ramey
+lib/posixheaders/memalloc.h	Chet Ramey
+lib/posixheaders/filecntl.h	Brian Fox, Chet Ramey
+lib/readline/Makefile.in	Brian Fox, Chet Ramey
+lib/readline/COPYING	Brian Fox, Chet Ramey
+lib/readline/ChangeLog	Brian Fox, Chet Ramey
+lib/readline/readline.c	Brian Fox, Chet Ramey
+lib/readline/vi_mode.c	Brian Fox, Chet Ramey
+lib/readline/emacs_keymap.c	Brian Fox, Chet Ramey
+lib/readline/vi_keymap.c	Brian Fox, Chet Ramey
+lib/readline/funmap.c	Brian Fox, Chet Ramey
+lib/readline/keymaps.c	Brian Fox, Chet Ramey
+lib/readline/xmalloc.c	Brian Fox, Chet Ramey
+lib/readline/search.c	Brian Fox, Chet Ramey
+lib/readline/isearch.c	Brian Fox, Chet Ramey
+lib/readline/parens.c	Brian Fox, Chet Ramey
+lib/readline/rltty.c	Brian Fox, Chet Ramey
+lib/readline/complete.c	Brian Fox, Chet Ramey
+lib/readline/bind.c	Brian Fox, Chet Ramey
+lib/readline/display.c	Brian Fox, Chet Ramey
+lib/readline/signals.c	Brian Fox, Chet Ramey
+lib/readline/kill.c	Brian Fox, Chet Ramey
+lib/readline/undo.c	Brian Fox, Chet Ramey
+lib/readline/input.c	Brian Fox, Chet Ramey
+lib/readline/macro.c	Brian Fox, Chet Ramey
+lib/readline/util.c	Brian Fox, Chet Ramey
+lib/readline/callback.c	Chet Ramey
+lib/readline/readline.h	Brian Fox, Chet Ramey
+lib/readline/chardefs.h	Brian Fox, Chet Ramey
+lib/readline/keymaps.h	Brian Fox, Chet Ramey
+lib/readline/rldefs.h	Brian Fox, Chet Ramey
+lib/readline/posixstat.h	Brian Fox, Chet Ramey
+lib/readline/ansi_stdlib.h	Brian Fox, Chet Ramey
+lib/readline/memalloc.h	Chet Ramey
+lib/readline/rlconf.h	Chet Ramey
+lib/readline/rltty.h	Chet Ramey
+lib/readline/history.c	Brian Fox, Chet Ramey
+lib/readline/histexpand.c	Brian Fox, Chet Ramey
+lib/readline/histfile.c	Brian Fox, Chet Ramey
+lib/readline/histsearch.c	Brian Fox, Chet Ramey
+lib/readline/history.h	Brian Fox, Chet Ramey
+lib/readline/histlib.h	Brian Fox, Chet Ramey
+lib/readline/tilde.c	Brian Fox, Chet Ramey
+lib/readline/tilde.h	Brian Fox, Chet Ramey
+lib/readline/doc/texindex.c	bug-texinfo@prep.ai.mit.edu, Chet Ramey
+lib/readline/doc/Makefile	Brian Fox, Chet Ramey
+lib/readline/doc/rlman.texinfo	Brian Fox, Chet Ramey
+lib/readline/doc/rltech.texinfo	Brian Fox, Chet Ramey
+lib/readline/doc/rluser.texinfo	Brian Fox, Chet Ramey
+lib/readline/doc/hist.texinfo	Brian Fox, Chet Ramey
+lib/readline/doc/hstech.texinfo	Brian Fox, Chet Ramey
+lib/readline/doc/hsuser.texinfo	Brian Fox, Chet Ramey
+lib/readline/examples/Makefile	Brian Fox
+lib/readline/examples/fileman.c	Brian Fox
+lib/readline/examples/manexamp.c	Brian Fox
+lib/readline/examples/histexamp.c	Brian Fox, Chet Ramey
+lib/readline/examples/rltest.c	Brian Fox, Chet Ramey
+lib/readline/examples/Inputrc	Brian Fox, Chet Ramey
+lib/termcap/Makefile.in	David MacKenzie, Chet Ramey
+lib/termcap/termcap.c	David MacKenzie
+lib/termcap/termcap.h	David MacKenzie
+lib/termcap/tparam.c	David MacKenzie
+lib/termcap/version.c	David MacKenzie
+lib/termcap/grot/termcap.info	David MacKenzie
+lib/termcap/grot/termcap.info-1	David MacKenzie
+lib/termcap/grot/termcap.info-2	David MacKenzie
+lib/termcap/grot/termcap.info-3	David MacKenzie
+lib/termcap/grot/termcap.info-4	David MacKenzie
+lib/termcap/grot/NEWS	David MacKenzie
+lib/termcap/grot/INSTALL	David MacKenzie
+lib/termcap/grot/ChangeLog	David MacKenzie
+lib/termcap/grot/texinfo.tex	David MacKenzie
+lib/termcap/grot/termcap.texi	David MacKenzie
+lib/termcap/grot/Makefile.in	David MacKenzie
+lib/termcap/grot/configure	David MacKenzie
+lib/termcap/grot/configure.in	David MacKenzie
+lib/termcap/grot/COPYING	David MacKenzie
+lib/termcap/grot/README	David MacKenzie
+lib/tilde/ChangeLog	Brian Fox, Chet Ramey
+lib/tilde/Makefile.in	Brian Fox, Chet Ramey
+lib/tilde/doc/tilde.texi	Brian Fox, Chet Ramey
+lib/tilde/doc/Makefile	Brian Fox, Chet Ramey
+lib/tilde/tilde.c	Brian Fox, Chet Ramey
+lib/tilde/tilde.h	Brian Fox, Chet Ramey
+lib/tilde/memalloc.h	Brian Fox, Chet Ramey
+CWRU/misc/open-files.c	Chet Ramey
+CWRU/misc/sigs.c	Chet Ramey
+CWRU/misc/pid.c		Chet Ramey
+CWRU/misc/sigstat.c	Chet Ramey
+CWRU/misc/bison		Chet Ramey
+CWRU/misc/aux-machine-desc	Chet Ramey
+CWRU/PLATFORMS		Chet Ramey
+CWRU/README		Chet Ramey
+CWRU/CWRU.CHANGES.051093	Chet Ramey
+CWRU/POSIX.NOTES	Chet Ramey
+CWRU/CWRU.CHANGES.071193	Chet Ramey
+CWRU/CWRU.CHANGES.090393	Chet Ramey
+doc/Makefile.in		Brian Fox, Chet Ramey
+doc/bash.1		Chet Ramey
+doc/builtins.1		Chet Ramey
+doc/bash.ps		Chet Ramey
+doc/bash.txt		Chet Ramey
+doc/readline.3		Chet Ramey
+doc/readline.ps		Chet Ramey
+doc/readline.txt	Chet Ramey
+doc/texinfo.tex		Richard Stallman
+doc/features.texi	Brian Fox, Chet Ramey
+doc/features.ps		Brian Fox, Chet Ramey
+doc/features.info	Brian Fox, Chet Ramey
+doc/features.dvi	Brian Fox, Chet Ramey
+doc/bash_builtins.1	Chet Ramey
+doc/bash_builtins.ps	Chet Ramey
+doc/bash_builtins.txt	Chet Ramey
+doc/bash_builtins.readme	Chet Ramey
+doc/article.ms		Chet Ramey
+doc/FAQ			Chet Ramey
+support/cat-s		Brian Fox, Chet Ramey
+support/mksysdefs	Brian Fox, Chet Ramey
+support/mkversion.c	Brian Fox, Chet Ramey
+support/mksignames.c	Brian Fox, Chet Ramey
+support/getcppsyms.c	Brian Fox, Chet Ramey
+support/cppmagic	Brian Fox, Chet Ramey
+support/pagesize.sh	Chet Ramey, Brian Fox
+support/pagesize.c	Chet Ramey, Brian Fox
+support/bash.xbm	Brian Fox
+support/FAQ		Brian Fox
+support/PORTING		Brian Fox
+support/mklinks		Brian Fox
+support/fixlinks	Chet Ramey
+support/mkdirs		Chet Ramey
+support/clone-bash	Chet Ramey
+support/bashbug.sh	Chet Ramey
+support/mkmachtype	Chet Ramey
+support/recho.c		Chet Ramey
+support/config.guess	Per Bothner, Chet Ramey
+support/config.sub	Richard Stallman, Chet Ramey
+support/install.sh	MIT X Consortium (X11R5)
+support/endian.c	Chet Ramey
+support/printenv	Chet Ramey
+examples/precedence-tester	Brian Fox, Chet Ramey
+examples/functions/substr	Brian Fox, Chet Ramey
+examples/functions/kshenv	Chet Ramey
+examples/functions/autoload	Chet Ramey
+examples/functions/csh-compat	Brian Fox, Chet Ramey
+examples/functions/shcat	Chet Ramey
+examples/functions/substr2	Chet Ramey
+examples/functions/term		Chet Ramey
+examples/functions/whatis	Chet Ramey
+examples/functions/whence	Chet Ramey
+examples/functions/func		Chet Ramey
+examples/functions/dirname	Brian Fox, Noah Friedman
+examples/functions/basename	Brian Fox, Noah Friedman
+examples/functions/exitstat	Noah Friedman, Roland McGrath
+examples/functions/external	Noah Friedman
+examples/functions/fact		Brian Fox
+examples/functions/manpage	Tom Tromey
+examples/functions/fstty	Chet Ramey
+examples/functions/jj.bash	Chet Ramey
+examples/functions/notify.bash	Chet Ramey
+examples/loadables/getconf.c	J.T. Conklin
+examples/scripts/shprompt	Chet Ramey
+examples/scripts/adventure.sh	Chet Ramey, Doug Gwyn
+examples/scripts/bcsh.sh	Chris Robertson, Chet Ramey
+examples/startup-files/Bashrc	Brian Fox
+examples/startup-files/Bash_aliases	Brian Fox
+examples/startup-files/Bash_profile	Brian Fox
+examples/startup-files/bash-profile	Brian Fox
+examples/startup-files/bashrc	Chet Ramey
+examples/suncmd.termcap	Brian Fox, Chet Ramey
+examples/alias-conv.sh	Brian Fox, Chet Ramey
+tests/README    	Chet Ramey
+tests/arith.tests	Chet Ramey
+tests/arith.right	Chet Ramey
+tests/array.tests	Chet Ramey
+tests/array.right	Chet Ramey
+tests/dollar-at.sh      Chet Ramey
+tests/dollar-star.sh    Chet Ramey
+tests/dollar.right      Chet Ramey
+tests/exp-tests 	Chet Ramey
+tests/exp.right 	Chet Ramey
+tests/glob-test 	Chet Ramey
+tests/glob.right        Chet Ramey
+tests/ifs-test-1.sh     Chet Ramey
+tests/ifs-test-2.sh     Chet Ramey
+tests/ifs-test-3.sh     Chet Ramey
+tests/ifs.1.right       Chet Ramey
+tests/ifs.2.right       Chet Ramey
+tests/ifs.3.right       Chet Ramey
+tests/input-line.sh     Chet Ramey
+tests/input-line.sub    Chet Ramey
+tests/input.right       Chet Ramey
+tests/minus-e   	Chet Ramey
+tests/minus-e.right     Chet Ramey
+tests/new-exp.tests     Chet Ramey
+tests/new-exp.right     Chet Ramey
+tests/prec.right        Chet Ramey
+tests/precedence        Chet Ramey
+tests/run-all   	Chet Ramey
+tests/run-dollars       Chet Ramey
+tests/run-exp-tests     Chet Ramey
+tests/run-glob-test     Chet Ramey
+tests/run-ifs-tests     Chet Ramey
+tests/run-input-test    Chet Ramey
+tests/run-minus-e       Chet Ramey
+tests/run-new-exp       Chet Ramey
+tests/run-precedence    Chet Ramey
+tests/run-set-e-test    Chet Ramey
+tests/run-strip 	Chet Ramey
+tests/run-varenv        Chet Ramey
+tests/set-e-test        Chet Ramey
+tests/set-e.right       Chet Ramey
+tests/strip.tests       Chet Ramey
+tests/strip.right       Chet Ramey
+tests/tilde-tests       Chet Ramey
+tests/tilde.right       Chet Ramey
+tests/unicode1.sub	Chet Ramey, John Kearney
+tests/varenv.right      Chet Ramey
+tests/varenv.sh 	Chet Ramey
+tests/misc/chld-trap.sh Chet Ramey
+tests/misc/dot-test-1.sh        Chet Ramey
+tests/misc/dot-test-1.sub       Chet Ramey
+tests/misc/gotest       Chet Ramey
+tests/misc/perf-script  Chet Ramey
+tests/misc/redir.t1.sh  Chet Ramey
+tests/misc/redir.t2.sh  Chet Ramey
+tests/misc/redir.t3.sh  Chet Ramey
+tests/misc/redir.t3.sub Chet Ramey
+tests/misc/redir.t4.sh  Chet Ramey
+tests/misc/run.r1.sh    Chet Ramey
+tests/misc/run.r2.sh    Chet Ramey
+tests/misc/run.r3.sh    Chet Ramey
+tests/misc/sigint.t1.sh Chet Ramey
+tests/misc/sigint.t2.sh Chet Ramey
+tests/misc/sigint.t3.sh Chet Ramey
+tests/misc/sigint.t4.sh Chet Ramey
+tests/misc/test-minus-e.1       Chet Ramey
+tests/misc/test-minus-e.2       Chet Ramey
+lib/sh/Makefile.in	Chet Ramey
+lib/sh/clktck.c		Chet Ramey
+lib/sh/clock.c		Chet Ramey
+lib/sh/fmtullong.c	Chet Ramey
+lib/sh/fmtulong.c	Chet Ramey
+lib/sh/getcwd.c		Chet Ramey, Roland McGrath
+lib/sh/getenv.c		Chet Ramey, Brian Fox
+lib/sh/inet_aton.c	Chet Ramey, Ulrich Drepper, Paul Vixie
+lib/sh/itos.c		Chet Ramey
+lib/sh/mailstat.c	Chet Ramey
+lib/sh/makepath.c	Chet Ramey
+lib/sh/mktime.c		Chet Ramey, Paul Eggert
+lib/sh/netconn.c	Chet Ramey
+lib/sh/netopen.c	Chet Ramey
+lib/sh/oslib.c		Chet Ramey, Brian Fox
+lib/sh/pathcanon.c	Chet Ramey
+lib/sh/pathphys.c	Chet Ramey
+lib/sh/rename.c		Chet Ramey
+lib/sh/setlinebuf.c	Chet Ramey, Brian Fox
+lib/sh/shquote.c	Chet Ramey
+lib/sh/shtty.c		Chet Ramey
+lib/sh/snprintf.c	Chet Ramey, Unknown
+lib/sh/spell.c		Chet Ramey
+lib/sh/strcasecmp.c	Chet Ramey, Brian Fox
+lib/sh/strerror.c	Chet Ramey, Brian Fox
+lib/sh/strftime.c	Arnold Robbins
+lib/sh/strindex.c	Chet Ramey
+lib/sh/stringlist.c	Chet Ramey
+lib/sh/stringvec.c	Chet Ramey
+lib/sh/strpbrk.c	Roland McGrath
+lib/sh/strtod.c		Chet Ramey, Roland McGrath
+lib/sh/strtoimax.c	Chet Ramey, Paul Eggert
+lib/sh/strtol.c		Chet Ramey, Paul Eggert
+lib/sh/strtoll.c	Chet Ramey, Paul Eggert
+lib/sh/strtoul.c	Chet Ramey, Paul Eggert
+lib/sh/strtoull.c	Chet Ramey, Paul Eggert
+lib/sh/strtoumax.c	Chet Ramey, Paul Eggert
+lib/sh/strtrans.c	Chet Ramey
+lib/sh/times.c		Chet Ramey, Brian Fox
+lib/sh/timeval.c	Chet Ramey
+lib/sh/tmpfile.c	Chet Ramey
+lib/sh/vprint.c		Chet Ramey, Brian Fox
+lib/sh/xstrchr.c	Chet Ramey, Mitsuru Chinen
+lib/sh/zread.c		Chet Ramey
+lib/sh/zwrite.c		Chet Ramey
+
+tests/posix-ifs.sh	Glenn Fowler
+
+support/checkbashisms	Julian Gilbey, Debian Linux team
+
+lib/readline/colors.c	Richard Stallman, David MacKenzie
+lib/readline/parse-colors.c Richard Stallman, David MacKenzie
diff --git a/CHANGES b/CHANGES
new file mode 100644
index 0000000..7a47c7c
--- /dev/null
+++ b/CHANGES
@@ -0,0 +1,10312 @@
+This document details the changes between this version, bash-5.1-rc3, and
+the previous version, bash-5.1-rc2.
+
+1. Changes to Bash
+
+a. The `assoc_expand_once' option now affects the evaluation of the -v primary
+   to test and the [[ compound command.
+
+2. Changes to Readline
+
+a. Fixed a bug that could cause point to be set beyond the end of the line
+   buffer when aborting an incremental search.
+
+3. New Features in Bash
+
+4. New Features in Readline
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-5.1-rc2, and
+the previous version, bash-5.1-rc1.
+
+1. Changes to Bash
+
+a. Process substitutions started from an interactive shell no longer have their
+   standard input implicitly redirected from /dev/null.
+
+b. Fixed an issue with setting the SIGINT trap handler in an interactive shell
+   when temporarily running $PROMPT_COMMAND non-interactively.
+
+2. Changes to Readline
+
+a. Terminals that are named "dumb" or unknown do not enable bracketed paste
+   by default.
+
+b. Ensure that disabling bracketed paste turns off highlighting the incremental
+   search string when the search is successful.
+
+3. New Features in Bash
+
+4. New Features in Readline
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-5.1-rc1, and
+the previous version, bash-5.1-beta.
+
+1. Changes to Bash
+
+a. Fixed an inconsistency in the way HISTCMD is calculated when it's expanded
+   during a multi-line command.
+
+b. Modified the change to here-document expansion containing backslash-quoted
+   double quotes.
+
+c. Fixed a case where the shells's exit status could be greater than 255.
+
+d. Modified changed to process substitution so the executed command has its
+   stdin redirected from /dev/null if it was previously interactive and
+   reading commands from the terminal.
+
+2. New Features in Bash
+
+a. There is a new contributed loadable builtin: asort.
+
+3. Changes to Readline
+
+a. Fixed a bug that could cause an application with an application-specific
+   redisplay function to crash if the line data structures had not been
+   initialized.
+
+4. New Features in Readline
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-5.1-beta, and
+the previous version, bash-5.1-alpha.
+
+1. Changes to Bash
+
+a. Fixed a bug that caused name references to variables to not update the
+   referenced variable's assignment side effects.
+
+b. Tightened up the parameter transformation error checking for invalid
+   transformation operators.
+
+c. System-specific changes for: FreeBSD
+
+d. A few minor changes to move potential uses of stdio functions out of signal
+   handling paths.
+
+e. Make sure SIGCHLD is blocked in all cases where waitchld() is not called
+   from a signal handler.
+
+f. Changed `command' builtin processing so it no longer starts an extra process
+   when run asynchronously (command x &).
+
+g. Avoid performing tilde expansion after `:' in words that look like assignment
+   statements when in posix mode.
+
+h. Slight changes to how the `complete' builtin prints out options and actions
+   for completion specifications.
+
+i. Several changes to how `local -' restores the values of options and
+   $SHELLOPTS.
+
+j. Don't treat a word in a compound assignment as an assignment statement
+   unless it has a valid subscript before the `='.
+
+k. Fixed a bug with the DEBUG trap and process substitution that caused the
+   terminal's process group to be set incorrectly.
+
+l. Fixed a bug that left readline's signal handlers installed while running a
+   shell command from a bindable readline command.
+
+m. Fixed the `fc' builtin to clamp out of range history specifications at the
+   boundaries of the history list for POSIX conformance.
+
+n. Fixed a bug that caused ${foo@a} to treat foo as an unset variable if it
+   was an array without a value for subscript 0/"0" but had other set
+   elements.
+
+o. Fixed a bug that caused the history code to attempt to parse command
+   substitutions looking for shell comments before adding them to the history,
+   even while parsing here-documents.
+
+p. Fixed a bug that could cause a syntax error in a command read by `eval' to
+   exit an interactive shell.
+
+2. New Features in Bash
+
+a. If the hash builtin is listing hashed filenames portably, don't print
+   anything if the table is empty.
+
+b. GLOBIGNORE now ignores `.' and `..' as a terminal pathname component.
+
+c. Bash attempts to optimize away forks in the last command in a function body
+   under appropriate circumstances.
+
+d. The globbing code now uses fnmatch(3) to check collation elements (if
+   available) even in cases without multibyte characters.
+
+e. The `fg' and `bg' builtins now return an error in a command substitution
+   when asked to restart a job inherited from the parent shell.
+
+f. The shell now attempts to unlink all FIFOs on exit, whether a consuming
+   process has finished with them or not.
+
+3. Changes to Readline
+
+a. Make sure that all undo groups are closed when leaving vi insertion mode.
+
+b. Make sure that the vi-mode `C' and `c' commands enter insert mode even if
+   the motion command doesn't have any effect.
+
+c. Fixed several potential memory leaks in the callback mode context handling.
+
+d. If readline is handling a SIGTTOU, make sure SIGTTOU is blocked while
+   executing the terminal cleanup code, since it's no longer run in a signal
+   handling context.
+
+4. New Features in Readline
+
+a. The signal cleanup code now blocks SIGINT while processing after a SIGINT.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-5.1-alpha, and
+the previous version, bash-5.0-release.
+
+1. Changes to Bash
+
+a. Fixed a bug that caused a posix-mode shell to not exit if the return builtin
+   was executed outside a function or dot script.
+
+b. Fixed a bug where `declare +f' could potentially turn off the function
+   attribute.
+
+c. Restored bash-4.4 pathname expansion behavior when a word to be expanded had
+   only backslashes, not any of the other globbing characters. This came after
+   an extensive POSIX group discussion (interp #1234).
+
+d. There are more changes to avoid performing word expansions multiple times on
+   arithmetic expressions.
+
+e. Fixed a bug with alias expansion when the alias ends with a TAB.
+
+f. Fixed a bug that caused programmable completion to return an error if the
+   shell function name supplied as an argument to `complete -F' was invalid.
+
+g. There are several fixes to buffer overflows found as the result of fuzzing
+   with random input.
+
+h. Fixed a bug that caused the edit-and-execute-command editing command to
+   start with the previous history line if invoked on an empty line.
+
+i. Fixed a bug that potentially caused `bind --help' to change readline's
+   output stream.
+
+j. Turning off posix mode now restores the vi-insertion mode binding for TAB
+   that was in effect when posix mode was enabled.
+
+k. Restore the previous state of job control being enabled if `exec' fails in
+   an interactive shell.
+
+l. Fixed a bug that caused the terminal's process group to be set incorrectly
+   if job control was turned off before starting an interactive shell.
+
+m. Fixed a bug that caused a crash when HISTSIZE=0.
+
+n. Fixed a word expansion bug that caused null strings on the rhs of expansions
+   to be discarded incorrectly.
+
+o. History list management does a better job of handling the situation where
+   the number of history entries from the current shell session is greater than
+   the number of entries in the history list.
+
+p. Fixed a bug that caused the `fc' builtin to attempt to dereference a newly-
+   freed history entry.
+
+q. Fixed a bug that made the `Q' variable transformation not work well with
+   `set -u'.
+
+r. There are several word expansion fixes for expanding $* and $@ in contexts
+   where word splitting is not going to be performed, since each positional
+   parameter must expand to a separate word.
+
+s. Fixed a bug that could cause ^D to exit bash immediately even if there were
+   stopped jobs.
+
+t. Fixed a bug with double-quoting and backslash-quoting strings containing
+   multibyte characters for reuse.
+
+u. Fixed a bug that caused the line number to be reported incorrectly if the
+   shell executed a (command) subshell.
+
+v. Fixed a bug that caused the shell to fail to reap process substitutions
+   when they went out of scope, which had unpredictable results.
+
+w. Fixed a bug that caused null strings in arguments to [[ conditional command
+   operators to compare incorrectly.
+
+x. Changed the behavior of `wait' without arguments to only wait for background
+   processes the current shell instance started, not background children it may
+   have inherited.
+
+y. Fixed a bug that could cause command substitution to leave file descriptors
+   open if the shell received many SIGINTs.
+
+z. Bash now behaves better if the `**' filename expansion operator encounters a
+   symbolic link to a directory, avoiding more cases where it might return
+   duplicate pathnames.
+
+aa. Programmable completion now canonicalizes directory names in the same way
+    as bash word completion, so `..' is handled consistently.
+
+bb. Fixed a bug when using RETURN as the delimiter to the read builtin; it
+    caused readline to set the binding for RETURN incorrectly.
+
+cc. Fixed a bug that caused `history -d' to delay printing an out-of-range
+    error message.
+
+dd. Fixed a bug with `bash -c command' where `command' ends with an expanded
+    alias.
+
+ee. Fixed a bug that could result in `history -n' adding spurious line feeds to
+    commands in the history list.
+
+ff. The $RANDOM random number generator now XORs the top and bottom halves of
+    the internal 32-bit value to introduce more randomness. Setting the shell
+    compatibility level to 50 or lower undoes this.
+
+gg. Fixed several problems caused by running the DEBUG trap on simple commands
+    executed as part of a pipeline.
+
+ii. Fixed a bug that didn't allow `bind -r' to remove the binding for \C-@.
+
+jj. Several fixes to the bash-backward-shellword bindable readline command to
+    behave better when at the last character on the line.
+
+kk. If `set -x' is enabled, bash doesn't print a command twice if it's run by
+    the `command' builtin.
+
+ll. Fixed a bug with printing function definitions containing here documents.
+
+mm. Fixed a bug that could cause the `bind' builtin to set $? to -1.
+
+nn. Fixed a bug that didn't reset the timezone information correctly when the
+    TZ variable was unset.
+
+oo. Fixed several issues with assigning an associative array variable using a
+    compound assignment that expands the value of the same variable.
+
+pp. Fixed several places where the shell set $? without setting PIPESTATUS.
+
+qq. Fixed a problem with glob bracket expressions containing invalid character
+    classes, collating symbols, or equivalence classes -- they should not
+    require a closing right bracket.
+
+rr. Fixed a bug where running a builtin in a subshell did not run the EXIT trap.
+
+ss. Fixed several problems with posix-mode variable assignments preceding
+    shell function calls and posix special builtins, so that they create and
+    modify variables at the current scope.
+
+tt. Fix history initialization so `bash +o history' works as expected.
+
+uu. Fixed a bug in the bindable edit-and-execute-command command that could
+    interfere with the shell's parsing state.
+
+vv. Fixed an issue with nested traps running command substitutions in command
+    lines with command substitutions.
+
+ww. Fixed a bug with globbing pathnames that contain invalid multibyte
+    characters (sequences that don't correspond to a character in the current
+    locale).
+
+xx. Fixed a bug that caused the shell not to exit if a function definition
+    failed while errexit was enabled.
+
+yy. Process substitution processes now get their input from /dev/null, since
+    they are asynchronous, not interactive, and not jobs.
+
+zz. Setting nocaseglob no longer turns on case-insensitive regexp matching.
+
+aaa. Fixed a bug that resulted in extra blank lines being added to some history
+     entries containing here-documents.
+
+bbb. Fixed a bug that resulted in incorrect matching of some patterns in word
+     expansion if they expanded to the empty string.
+
+ccc. Fixed here-string expansion so it behaves the same as expansion of the
+     rhs of an assignment statement.
+
+ddd. Changed here-document parsing to no longer allow the end of the here
+     document to delimit a command substitution.
+
+eee. Several fixes to history expansion: multiple :p modifiers work, a ^ word
+     designator works as part of a range, and a `-' is treated as part of a
+     search string if it immediately follows a `!'.
+
+fff. Fixed a bug in pattern substitution with null matches in a string
+     containing multibyte characters.
+
+ggg. Unbinding a key sequence bound with `bind -x' now removes the key sequence
+     from the additional keymap `bind -x' uses.
+
+hhh. Fixed a bug with command start detection for completion so that it doesn't
+     mistake brace expansion for the start of a command.
+
+iii. Fixed a bug that caused local variables with the same name as variables
+     appearing in a function's temporary environment to not be marked as local.
+
+jjj. Fixed a bug that could cause SIGCHLD to be blocked when executing return
+     or exec in the rightmost pipeline element with lastpipe enabled.
+
+kkk. Fixed a bug that could result in commands without the execute bit set
+     being added to the command hash table.
+
+lll. Fixed a bug that allowed non-digits to follow the `#' in a `base#number'
+     integer constant.
+
+mmm. Fixed a bug that made `time -- command' attempt to execute `--'.
+
+nnn. Fixed a couple of bugs with variable transformation using arrays
+     subscripted with `*' or `@'.
+
+ooo. A failure to create a variable using `declare' in a function no longer
+     causes the function to return immediately.
+
+ppp. Fixed a bug that could cause the := word expansion to add a non-null
+     value if attempting to assign a null string when double-quoted.
+
+qqq. Fixed a bug that could cause backslashes quoting double quotes in here
+     document bodies to not be removed when expanding the body.
+
+rrr. Fixed a bug that caused commands following a subshell while the shell is
+     reading input from stdin but not interactive, while job control is
+     enabled, to be executed twice.
+
+sss. Fixed a bug where receiving SIGTERM from a different process while
+     readline was active could cause the shell to terminate.
+
+ttt. In posix mode, running a trap after the read builtin now sees the exit
+     status of the read builtin (e.g., 130 after a SIGINT) in $?.
+
+uuu. Fixed a bug with nameref variables referencing array subscripts used in
+     arithmetic expressions.
+
+vvv. Fixed a bug that caused the pipeline process group id to be reset in the
+     middle of a command list run by a shell started to run a command
+     substitution.
+
+www. Restricted shells can no longer read and write history files with pathnames
+     containing slashes.
+
+xxx. Fixed a couple of problems with 0 and -0 used as arguments to `fc' when
+     not listing commands from the history.
+
+yyy. When `test' is supplied four or more arguments, treat an argument that
+     looks like an operator (e.g., -e), but is in a place where only a string
+     is valid, as a string, as it would be when using the POSIX rules, instead
+     of an operator with a missing argument.
+
+zzz. There is no `compat50' shopt option. Changes to the shell compatibility
+     level should use the BASH_COMPAT variable.
+
+aaaa. Redirection failures with compound commands are now treated as errors
+      that cause the shell to exit if `errexit' is enabled.
+
+bbbb. Redirection failure error messages no longer expand the word in the
+      redirection again.
+
+cccc. History expansion is no longer performed while parsing a here-document
+      inside a command substitution.
+
+2. Changes to Readline
+
+a. There are a number of fixes that were found as the result of fuzzing with
+   random input.
+
+b. Changed the revert-all-at-newline behavior to make sure to start at the end
+   of the history list when doing it, instead of the line where the user hit
+   return.
+
+c. When parsing `set' commands from the inputrc file or an application, readline
+   now allows trailing whitespace.
+
+d. Fixed a bug that left a file descriptor open to the history file if the
+   file size was 0.
+
+e. Fixed a problem with binding key sequences containing meta characters.
+
+f. Fixed a bug that caused the wrong line to be displayed if the user tried to
+   move back beyond the beginning of the history list, or forward past the end
+   of the history list.
+
+g. If readline catches SIGTSTP, it now sets a hook that allows the calling
+   application to handle it if it desires.
+
+h. Fixed a redisplay problem with a prompt string containing embedded newlines.
+
+i. Fixed a problem with completing filenames containing invalid multibyte
+   sequences when case-insensitive comparisons are enabled.
+
+j. Fixed a redisplay problem with prompt strings containing invisible multibyte
+   characters.
+
+k. Fixed a problem with multibyte characters mapped to editing commands that
+   modify the search string in incremental search.
+
+l. Fixed a bug with maintaining the key sequence while resolving a bound
+   command in the presence of ambiguous sequences (sequences with a common
+   prefix), in most cases while attempting to unbind it.
+
+m. Fixed several buffer overflows found as the result of fuzzing.
+
+n. Reworked backslash handling when translating key sequences for key binding
+   to be more uniform and consistent, which introduces a slight backwards
+   incompatibility.
+
+o. Fixed a bug with saving the history that resulted in errors not being
+   propagated to the calling application when the history file is not writable.
+
+p. Readline only calls chown(2) on a newly-written history file if it really
+   needs to, instead of having it be a no-op.
+
+q. Readline now behaves better when operate-and-get-next is used when the
+   history list is `full': when there are already $HISTSIZE entries.
+
+r. Fixed a bug that could cause vi redo (`.') of a replace command not to work
+   correctly in the C or POSIX locale.
+
+s. Fixed a bug with vi-mode digit arguments that caused the last command to be
+   set incorrectly. This prevents yank-last-arg from working as intended, for
+   example.
+
+3. New Features in Bash
+
+a. `bind -x' now supports different bindings for different editing modes and
+   keymaps.
+
+b. Bash attempts to optimize the number of times it forks when executing
+   commands in subshells and from `bash -c'.
+
+c. Here documents and here strings now use pipes for the expanded document if
+   it's smaller than the pipe buffer size, reverting to temporary files if it's
+   larger.
+
+d. There are new loadable builtins: mktemp, accept, mkfifo, csv, cut/lcut
+
+e. In posix mode, `trap -p' now displays signals whose disposition is SIG_DFL
+   and those that were SIG_IGN when the shell starts.
+
+f. The shell now expands the history number (e.g., in PS1) even if it is not
+   currently saving commands to the history list.
+
+g. `read -e' may now be used with arbitrary file descriptors (`read -u N').
+
+h. The `select' builtin now runs traps if its internal call to the read builtin
+   is interrupted by a signal.
+
+i. SRANDOM: a new variable that expands to a 32-bit random number that is not
+   produced by an LCRNG, and uses getrandom/getentropy, falling back to
+   /dev/urandom or arc4random if available. There is a fallback generator if
+   none of these are available.
+
+j. shell-transpose-words: a new bindable readline command that uses the same
+   definition of word as shell-forward-word, etc.
+
+k. The shell now adds default bindings for shell-forward-word,
+   shell-backward-word, shell-transpose-words, and shell-kill-word.
+
+l. Bash now allows ARGV0 appearing in the initial shell environment to set $0.
+
+m. If `unset' is executed without option arguments, bash tries to unset a shell
+   function if a name argument cannot be a shell variable name because it's not
+   an identifier.
+
+n. The `test -N' operator uses nanosecond timestamp granularity if it's
+   available.
+
+o. Bash posix mode now treats assignment statements preceding shell function
+   definitions the same as in its default mode, since POSIX has changed and
+   no longer requires those assignments to persist after the function returns
+   (POSIX interp 654).
+
+p. BASH_REMATCH is no longer readonly.
+
+q. wait: has a new -p VARNAME option, which stores the PID returned by `wait -n'
+   or `wait' without arguments.
+
+r. Sorting the results of pathname expansion now uses byte-by-byte comparisons
+   if two strings collate equally to impose a total order; the result of a
+   POSIX interpretation (#963 and #1070).
+
+s. Bash now allows SIGINT trap handlers to execute recursively.
+
+t. Bash now saves and restores state around setting and unsetting posix mode,
+   instead of having unsetting posix mode set a known state.
+
+u. Process substitution is now available in posix mode.
+
+v. READLINE_MARK: a new variable available while executing commands bound with
+   `bind -x', contains the value of the mark.
+
+w. Bash removes SIGCHLD from the set of blocked signals if it's blocked at shell
+   startup.
+
+x. `test -v N' can now test whether or not positional parameter N is set.
+
+y. `local' now honors the `-p' option to display all local variables at the
+    current context.
+
+z. The `@a' variable transformation now prints attributes for unset array
+   variables.
+
+aa. The `@A' variable transformation now prints a declare command that sets a
+    variable's attributes if the variable has attributes but is unset.
+
+bb. `declare' and `local' now have a -I option that inherits attributes and
+    value from a variable with the same name at a previous scope.
+
+cc. When run from a -c command, `jobs' now reports the status of completed jobs.
+
+dd. New `U', `u', and `L' parameter transformations to convert to uppercase,
+    convert first character to uppercase, and convert to lowercase,
+    respectively.
+
+ee. PROMPT_COMMAND: can now be an  array variable, each element of which can
+    contain a command to be executed like a string PROMPT_COMMAND variable.
+
+ff. `ulimit' has a -R option to report and set the RLIMIT_RTTIME resource.
+
+gg. Associative arrays may be assigned using a list of key-value pairs within
+    a compound assignment. Compound assignments where the words are not of
+    the form [key]=value are assumed to be key-value assignments. A missing or
+    empty key is an error; a missing value is treated as NULL. Assignments may
+    not mix the two forms.
+
+hh. New `K' parameter transformation to display associative arrays as key-
+    value pairs.
+
+ii. Writing history to syslog now handles messages longer than the syslog max
+    length by writing multiple messages with a sequence number.
+
+jj. SECONDS and RANDOM may now be assigned using arithmetic expressions, since
+    they are nominally integer variables. LINENO is not an integer variable.
+
+kk. Bash temporarily suppresses the verbose option when running the DEBUG trap
+    while running a command from the `fc' builtin.
+
+ll. `wait -n' now accepts a list of job specifications as arguments and will
+    wait for the first one in the list to change state.
+
+mm. The associative array implementation can now dynamically increase the
+    size of the hash table based on insertion patterns.
+
+nn. HISTFILE is now readonly in a restricted shell.
+
+oo. The bash malloc now returns memory that is 16-byte aligned on 64-bit
+    systems.
+
+4. New Features in Readline
+
+a. If a second consecutive completion attempt produces matches where the first
+   did not, treat it as a new completion attempt and insert a match as
+   appropriate.
+
+b. Bracketed paste mode works in more places: incremental search strings, vi
+   overstrike mode, character search, and reading numeric arguments.
+
+c. Readline automatically switches to horizontal scrolling if the terminal has
+   only one line.
+
+d. Unbinding all key sequences bound to a particular readline function now
+   descends into keymaps for multi-key sequences.
+
+e. rl-clear-display: new bindable command that clears the screen and, if
+   possible, the scrollback buffer (bound to emacs mode M-C-l by default).
+
+f. New active mark and face feature: when enabled, it will highlight the text
+   inserted by a bracketed paste (the `active region') and the text found by
+   incremental and non-incremental history searches. This is tied to bracketed
+   paste and can be disabled by turning off bracketed paste.
+
+g. Readline sets the mark in several additional commands.
+
+h. Bracketed paste mode is enabled by default.
+
+i. Readline tries to take advantage of the more regular structure of UTF-8
+   characters to identify the beginning and end of characters when moving
+   through the line buffer.
+
+j. The bindable operate-and-get-next command (and its default bindings) are
+   now part of readline instead of a bash-specific addition.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-5.0-release, and
+the previous version, bash-5.0-rc1.
+
+1. Changes to Bash
+
+a. Tilde expansion isn't performed on indexed array subscripts, even for
+   backwards compatibility.
+
+b. The shell doesn't exit in posix mode if the eval builtin gets a parse
+   error when run by the command builtin.
+
+c. Fixed a bug that caused a shell comment in an alias to not find the end
+   of the alias properly.
+
+d. Reverted a change from April, 2018 that caused strings containing
+   backslashes to be flagged as glob patterns.
+
+2. Changes to Readline
+
+3. New Features in Bash
+
+4. New Features in Readline
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-5.0-rc1, and
+the previous version, bash-5.0-beta2.
+
+1. Changes to Bash
+
+a. Fix to initial word completion detection code.
+
+b. Fixed a bug that caused issues with assignment statements containing ^A in
+   the value assigned when IFS contains ^A.
+
+c. Added a fallback to fnmatch() when strcoll can't correctly deal with
+   bracket expression character equivalence classes.
+
+d. Fixed a bug that caused $BASH_COMMAND to contain the trap handler command
+   when running a trap handler containing [[ or (( commands.
+
+e. Fixed a bug that caused nameref assignments in the temporary environment
+   to potentially create variables with invalid names.
+
+f. Fixed a bug that caused `local -' to turn off alias expansion in scripts.
+
+g. Fixed a parser issue with a command string containing EOF after an invalid
+   command as an argument to a special builtin not causing a posix-mode shell
+   to exit.
+
+h. Made a slight change to the FNV-1 string hash algorithm used for associative
+   arrays (corrected the initial seed).
+
+2. Changes to Readline
+
+3. New Features in Bash
+
+a. The `select' command now supports command forms without a word list
+   following `in'.
+
+4. New Features in Readline
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-5.0-beta2, and
+the previous version, bash-5.0-beta.
+
+1. Changes to Bash
+
+a. Fixed a bug that could cause a seg fault while parsing a subshell command
+   inside a command substitution.
+
+b. Fixed several small memory leaks uncovered by coverity.
+
+c. Fixed a problem with command substitution inside an interactive shell that
+   could cause the parent to receive a SIGHUP.
+
+d. Fixed a problem with using `*' and `@' as subscripts when assigning values
+   to an associative array with assoc_expand_once enabled.
+
+e. Fixed a bug that could cause a huge memory allocation when completing a
+   word beginning with an invalid tilde expansion.
+
+f. Cleaned up some incompatibilities with bash-4.4 when expanding indexed array
+   subscripts used in arithmetic expansions when assoc_expand_once is enabled.
+
+g. The ${parameter@a} expansion will display attributes even if `parameter' is
+   unset.
+
+h. Fixed a bug that caused the output of `set' to cut off some variables before
+   printing the value.
+
+i. Treat a failure to assign a variable when using the ${x:=value} expansion
+   as an expansion error, so non-interactive posix-mode shells exit
+
+j. Fixed a problem when expanding $* in a context where word splitting is not
+   performed when IFS is NULL.
+
+k. Temp files used to store here documents are forced readable, no matter what
+   the user's umask says.
+
+l. Fixed a problem where an interrupted brace expansion could cause the shell
+   to attempt to free an invalid memory location.
+
+m. Make sure to check for any terminating signals after running a trap
+   handler; don't wait until the next time we process traps.
+
+n. Fixed a bug that caused "return" to act like a special builtin with respect
+   to variable assignments even when preceded by "command".
+
+o. POSIX-mode shells now return failure if the cd builtin fails due to the
+   absolute directory name being longer than PATH_MAX, instead of trying
+   again with a relative pathname.
+
+p. Fixed a problem with FUNCNAME occasionally being visible when not executing
+   a shell function.
+
+q. Fixed a problem with the expansions performed on the WORD in the case
+   command.
+
+r. Fixed a slight POSIX compatibility when removing "IFS whitespace" during
+   word splitting and the read builtin.
+
+s. Fixed a problem with expanding an array with subscript `*' when all the
+   elements expand to the empty string, and making sure the expansion honors
+   the `:' specifier.
+
+2. Changes to Readline
+
+a. Fixed a bug with adding multibyte characters to an incremental search string.
+
+b. Fixed a bug with redoing text insertions in vi mode.
+
+c. Fixed a bug with pasting text into an incremental search string if bracketed
+   paste mode is enabled. ESC cannot be one of the incremental search
+   terminator characters for this to work.
+
+d. Fixed a bug with anchored search patterns when performing searches in vi
+   mode.
+
+3. New Features in Bash
+
+a. Associative and indexed arrays now allow subscripts consisting solely of
+   whitespace.
+
+b. `checkwinsize' is now enabled by default.
+
+c. The `localvar_unset' shopt option is now visible and documented.
+
+d. The `progcomp_alias' shopt option is now visible and documented.
+
+e. The signal name processing code now understands `SIGRTMIN+n' all the way
+   up to SIGRTMAX.
+
+f. There is a new `seq' loadable builtin.
+
+g. Trap execution now honors the (internal) max invocations of `eval', since
+   traps are supposed to be executed as if using `eval'.
+
+h. The $_ variable doesn't change when the shell executes a command that forks.
+
+i. The `kill' builtin now supports -sSIGNAME and -nSIGNUM, even though
+   conforming applications aren't supposed to use them.
+
+j. POSIX mode now enables the `shift_verbose' option.
+
+4. New Features in Readline
+
+a. Readline now allows application-defined keymap names; there is a new public
+   function, rl_set_keymap_name(), to do that.
+
+b. The "Insert" keypad key, if available, now puts readline into overwrite
+   mode.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-5.0-beta, and
+the previous version, bash-5.0-alpha.
+
+1.  Changes to Bash
+
+a. Fixed a bug that allowed subshells to "inherit" enclosing loops -- this
+   is where POSIX says the subshell is not "enclosed" by the loop.
+
+b. Added more UTF-8-specific versions of multibyte functions, and optimized
+   existing functions if the current locale uses UTF-8 encoding.
+
+c. In POSIX mode, assignments preceding regular builtins should not persist
+   when the builtin completes.
+
+d. Added additional checks to special array assignment (e.g., BASH_ALIASES)
+   so it can't be used to bypass validity checks performed in other places.
+
+e. The `!!' history expansion now refers to the previous history entry as
+   expected, even if used on the second or subsequent line of a multi-line
+   history entry.
+
+f. Fixed a bug that could cause the shell to dereference a NULL pointer if
+   the environment (`environ') is set to NULL.
+
+g. Bash uses slightly better integer overflow handling for brace sequence
+   expansion on systems where ints are 32 bits and intmax_t is 64 bits.
+
+h. Fixed a bug setting attributes for a variable named as an argument to
+   `declare' that also appears as a nameref in the temporary environment.
+
+i. Fixed several bugs that could cause assignments to namerefs to create
+   variables with invalid names.
+
+j. Fixed a bug that could result in the SIGINT handler being set incorrectly
+   in asynchronous subshells.
+
+k. Fixed a bug that could cause `bash -t' to not execute the specified command.
+
+l. Fixed several bugs that caused the shell to operate on the wrong variable
+   when using namerefs with the same name as a global variable in shell
+   functions.
+
+m. Internal changes to how the shell handles variables with invalid names in
+   the initial environment and to prevent variables with invalid names from
+   being added to the environment instead of passing them on to children.
+
+n. Changes to make sure that an expansion that results in a quoted null string
+   is reflected in the expansion, even if the word expands to nothing.
+
+o. Changes to make sure that $* and ${array[*]} (and $@/${array[@]}) expand
+   the same way after the recent changes for POSIX interpretation 888.
+
+p. Saving and restoring the positional parameters at function entry and exit
+   is considerably more efficient; noticeably so when there are large numbers
+   of positional parameters.
+
+q. Fixed a bug that caused `lastpipe' and `pipefail' to return an incorrect
+   status for the pipeline if there was more than one external command in a
+   loop body appearing in the last pipeline element.
+
+r. Fixed a bug that caused value conversion errors with the printf builtin's
+   %u and %f conversion specifications and invalid constants.
+
+2.  Changes to Readline
+
+a. Added more UTF-8-specific versions of multibyte functions, and optimized
+   existing functions if the current locale uses UTF-8 encoding.
+
+b. Fixed a problem with bracketed-paste inserting more than one character and
+   interacting with other readline functions.
+
+c. Fixed a bug that caused the history library to attempt to append a history
+   line to a non-existent history entry.
+
+d. If using bracketed paste mode, output a newline after the \r that is the
+   last character of the mode disable string to avoid overwriting output.
+
+e. Fixes to the vi-mode `b', `B', `w', `W', `e', and `E' commands to better
+   handle multibyte characters.
+
+f. Fixed a redisplay problem that caused an extra newline to be generated on
+   accept-line when the line length is exactly the screenwidth.
+
+3.  New Features in Bash
+
+a. Bash no longer allows variable assignments preceding a special builtin that
+   changes variable attributes to propagate back to the calling environment
+   unless the compatibility level is 44 or lower.
+
+b. You can set the default value for $HISTSIZE at build time in config-top.h.
+
+c. The `complete' builtin now accepts a -I option that applies the completion
+   to the initial word on the line.
+
+d. The internal bash malloc now uses mmap (if available) to satisfy requests
+   greater than 128K bytes, so free can use mfree to return the pages to the
+   kernel.
+
+e. The shell doesn't automatically set BASH_ARGC and BASH_ARGV at startup
+   unless it's in debugging mode, as the documentation has always said, but
+   will dynamically create them if a script references them at the top level
+   without having enabled debugging mode.
+
+f. The localvar_inherit option will not attempt to inherit a value from a
+   variable of an incompatible type (indexed vs. associative arrays, for
+   example).
+
+g. The `globasciiranges' option is now enabled by default; it can be set to
+   off by default at configuration time.
+
+4.  New Features in Readline
+
+a. The history expansion library now understands command and process
+   substitution and extended globbing and allows them to appear anywhere in a
+   word.
+
+b. The history library has a new variable that allows applications to set the
+   initial quoting state, so quoting state can be inherited from a previous
+   line.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-5.0-alpha, and
+the previous version, bash-4.4-release.
+
+1.  Changes to Bash
+
+a. Fixed a bug that could cause traps in background jobs to give the terminal
+   to the wrong process group.
+
+b. Fixed a bug that caused `kill -l 0' to print an out-of-range error.
+
+c. Fixed a problem that could result in here-documents being displayed in
+   the wrong order.
+
+d. Fixed a number of out-of-bounds and free memory read errors found via
+   fuzzing.
+
+e. Fixed a subshell inheritance problem that could cause a subshell to wait for
+   the wrong process.
+
+f. Fixed a bug that caused SHLVL to be incremented one too many times when
+   creating subshells.
+
+g. A job dying due to SIGINT can now interrupt sourcing a file in a shell with
+   job control enabled.
+
+h. Fixed a spurious warning about unterminated ${ or $( constructs during
+   word completion.
+
+i. The shell no longer runs traps if a signal arrives while reading command
+   substitution output.
+
+j. Fixed an arithmetic expansion error that could allow ++var++ as valid
+   syntax.
+
+k. Fixed an error that allowed out-of-bounds references to the directory stack.
+
+l. The shell does a better job of saving multi-line history entries with
+   embedded comments.
+
+m. Fixed a bug that could cause quoted bracket expressions in regular expression
+   arguments to `[[' to not match correctly.
+
+n. Fixed a bug that could cause an IFS character in a word to result in an
+   extra '\001' character in the expansion.
+
+o. A trailing backslash in a glob pattern can match a trailing backslash in the
+   string.
+
+p. Fixed a memory leak in the process creation code path when job control is
+   enabled.
+
+q. Fixed a bug that caused `printf' to output broken surrogate pairs for
+   Japanese locales.
+
+r. Fixed a bug that caused a SIGINT generated from `kill' in a dot script to
+   kill an interactive shell.
+
+s. Fixed a bug that could cause the `read' builtin to not fully read a
+   multibyte character.
+
+t. Fixed a bug that could cause identifiers to be evaluated in conditional
+   arithmetic expressions even when evaluation is suppressed.
+
+u. Fixed a bug that could result in command substitution, when executed in a
+   context where word splitting is not performed, to leave a stray '\001'
+   character in the string.
+
+v. Fixed a bug that could cause history expansion to be disabled in a non-
+   interactive shell even if `-o histexpand' is supplied at startup.
+
+w. Fixed a bug that caused `read -N' to strip leading whitespace IFS characters.
+
+x. Fixed a bug that caused spurious tilde expansion in arithmetic expressions.
+
+y. If indirect expansion attempts to indirectly reference through an unset
+   variable, report an error.
+
+z. Added a guard to prevent the shell from looping while receiving an endless
+   stream of SIGTTIN at shell startup.
+
+aa. Fixed a bug with parsing here documents inside a command substitution when
+    looking for the closing delimiter.
+
+bb. Fixed a bug that caused printf to not quote all <blank> characters in the
+    current locale when using the `%q' format specifier.
+
+cc. Fixed a bug with bash's internal buffered I/O system that caused the input
+    pointer to not be reset when read(2) returned an EOF.
+
+dd. Bash now installs its SIGWINCH signal handler with SA_RESTART, so it will
+    not interrupt open/read/write system calls.
+
+ee. The ERR trap now reports line numbers more reliably.
+
+ff. The shell no longer tries to manipulate the terminal process group if a
+    command or process substitution is killed by SIGTERM when job control is
+    enabled.
+
+gg. Fixed a bug that caused extglob patterns to match filenames beginning with
+    a period.
+
+hh. File descriptors open for writing to here documents are no longer available
+    to subshells.
+
+ii. Make sure word completion doesn't perform command or process substitution.
+
+jj. Fixed a bug with parsing $$'...' inside a command substitution.
+
+kk. Fixed a bug that caused bash to remove backslash-newline pairs from the
+    body of a here-document with a quoted delimiter inside a command
+    substitution.
+
+ll. Fixed a bug that could cause the shell to hang when adding a pid to the
+    table of background process exit statuses.
+
+mm. Fixed a bug that could cause 0x01 characters to be doubled in the output
+    of process substitution.
+
+nn. Restricted shells now clear the hash table before making the PATH variable
+    read-only.
+
+oo. There are a number of changes to the expansion of $* and $@ in contexts
+    where word splitting does not occur (quoted and unquoted), with IFS set
+    to NULL or a non-standard value, mostly to deal with the consequences of
+    the behavior defined in Posix interpretation 888.
+
+pp. There are a number of changes to nameref variable handling to avoid
+    creating variables with invalid names.
+
+qq. A non-interactive posix mode shell no longer exits when an assignment
+    statement fails if the assignment is utimately being performed by the
+    `command' builtin.
+
+rr. When using character class names for globbing, don't allow case
+    insensitivity, even if nocaseglob is enabled.
+
+ss. Fixed a bug that allowed some redirections to stay in place if a later
+    redirection failed.
+
+tt. Fixed a bug in how command and process substitutions are recognized within
+    other parameter expansions.
+
+uu. Fixed a bug that caused bash to loop under certain circumstances when
+    performing arithmetic expansion on a variable whose value is an invalid
+    expression.
+
+vv. Fixed a bug that could cause bash to expand aliases inappropriately while
+    parsing compound commands like `case'.
+
+ww. Fixed a bug that could cause `read -N' to fail to read complete multibyte
+    characters, even when the sequences are incomplete or invalid, with or
+    without readline.
+
+xx. Fixed a bug that could cause `case' to fail to match patterns containing
+    0x01 characters.
+
+yy. Fixed a bug that caused exported functions to contain stray 0x01 characters.
+
+zz. Fixed some inconsistencies with how the history number is handled in the
+    various prompt strings.
+
+aaa. Fixed a bug that could cause a core dump if READLINE_LINE was unset
+     inside a shell function bound to a key sequence with `bind -x'.
+
+bbb. Fixed a bug that could cause bash to not read a token terminator correctly
+     if a command substitution was used inside an arithmetic `for' command.
+
+ccc. Fixed problems that could occur with a fatal arithmetic expansion error
+     in a context (like prompt expansion) where you can't jump back to the
+     top level.
+
+ddd. Expression errors in arithmetic `for' commands are treated more like
+     shell syntax errors.
+
+eee. Fixed a parser synchronization error resulting from a syntax error
+     followed immediately by an EOF.
+
+fff. When executing a shell function, the first line in the function ($LINENO)
+     is line 1 instead of line 0, as Posix requires.
+
+ggg. In Posix mode, bash will canonicalize the value of PWD it inherits from
+     the environment and use that to set its idea of the current directory.
+
+hhh. If LINENO is exported, bash needs to regenerate its value each time it
+     constructs the environment.
+
+iii. Fixed a bug with restoring the SIGINT handler when using `wait -n'.
+
+jjj. Make sure the `coproc' command returns an appropriate status if the NAME
+     argument is invalid.
+
+kkk. Fixed a problem with arithmetic expressions containing array references
+     that contain arithmetic expressions with syntax errors.
+
+lll. The `select' command and help builtin will use $COLUMNS before the window
+     size returned from the kernel as the terminal width.
+
+mmm. `read -n 0' and `read -N 0' now try a zero-length read in an attempt to
+     detect file descriptor errors.
+
+nnn. The `read' builtin now does a better job of acting on signals that don't
+     interrupt read(2).
+
+ooo. Fixed some cases where `printf -v' did not return failure status on a
+     variable assignment error.
+
+ppp. Fixed temporary environment propagation back to the current environment
+     so that it doesn't happen for special builtins run by the `command'
+     builtin.
+
+qqq. Fixed a bug when searching for the end of a here-document delimiter in a
+     command substitution.
+
+rrr. Fixed a bug that could cause `cd ${DIRSTACK[0]}' to fail.
+
+sss. Fixed a bug that could cause reserved words to not be recognized in a
+     for statement without the `in' inside a command substitution.
+
+ttt. Fixed a bug that could cause a double-free in a timed command with an
+     expansion error.
+
+uuu. Fixed a bug that could cause a core dump if a script switches from a UTF-8
+     locale to a different locale after displaying a lone surrogate character.
+
+vvv. Fixed cases where bash prematurely removed FIFOs attached to process
+     substitutions.
+
+www. Fixed a problem with calculating the size of the table that stores exit
+     statuses from background processes when the child process resource limit
+     is very large.
+
+xxx. Fixed a memory leak with functions using `return' when using FIFOs for
+     standard input.
+
+yyy. `wait' without arguments attempts to wait for all active process
+     substitution processes.
+
+zzz. Fixed a bug where an indirect parameter was subjected to word splitting
+     when trying to find the indirected variable name.
+
+aaaa. Fixed a bug that could allow restricted shell users to add commands to
+      the hash table.
+
+bbbb. When using the `!(patlist)' extended globbing operator, a filename
+      beginning with a `.' that doesn't match any of the patterns is not
+      returned as a match if leading dots must be matched explicitly.
+
+cccc. Fixed a bug that could cause line number and source file information for
+      a function definition to be incorrect if there are multiple definitions.
+
+dddd. Fixed a bug that could cause builtins like `readonly' to behave
+      differently when applied to arrays and scalar variables within functions.
+
+eeee. Fixed a bug that could cause alias expansion to add an extra space to
+      a quoted string that begins outside the alias expansion.
+
+ffff. Fixed a bug that could result in unwanted alias expansion after timing
+      the null command.
+
+gggg. Fixed a bug that could cause a core dump if a timestamp in a history
+      file overflowed a time_t.
+
+hhhh. Restricted shells can no longer redirect from /dev/tcp or /dev/udp, since
+      the kernel calls make those file descriptors read-write.
+
+iiii. Fixed a problem with splitting double-quoted words for programmable
+      completion when the double quote immediately follows another word
+      delimiter.
+
+jjjj. Fixed a bug resulting in a use-after-free if two file descriptors share
+      the same input buffer.
+
+kkkk. The error message resulting from ${x:?} and ${x?} now differs depending
+      on whether the variable is null or unset.
+
+llll. In Posix mode, the shell exits if a variable assignment fails and precedes
+      an empty simple command (after expansion).
+
+mmmm. Fixed a timing problem with SIGALRM that could cause the read builtin to
+      drop characters.
+
+nnnn. Added code to deal with kill(2) failing to send the shell a fatal signal
+      due to Linux pid namespace peculiarities.
+
+oooo. Fixed a bug that made \C-@ (NUL) unusable in key sequences used for
+      `bind -x' commands.
+
+pppp. Fixed a bug that could cause SIGINT recursion when running an external
+      command in a trap the shell takes after a command exits due to SIGINT.
+
+qqqq. Make sure the shell turns off job control before running the command-
+      not-found handle, so the command doesn't try to manipulate process
+      groups.
+
+rrrr. Fixed a problem with timing process substitutions that caused the shell
+      to print timing information for the calling command.
+
+ssss. Fixed a bug that caused backquotes in a here-document delimiter to mark
+      the delimiter as quoted (inhibiting expansion of the here-document
+      contents).
+
+tttt. Fixed several problems with 0x01 and 0x177 in case pattern lists and
+      conditional command pattern matches.
+
+uuuu. Fixed a bug that could cause the pattern matching engine to not recognize
+      locale-specific character classes.
+
+vvvv. The auto-configuration now tests for /dev/stdin and /dev/fd independently.
+
+wwww. The `globstar' code now skips over symbolic links to directories,
+      preventing them from being scanned twice.
+
+xxxx. When running `bind -x' commands, bash now sets READLINE_POINT based on
+      the number of characters in the readline line buffer, not the number of
+      bytes.
+
+yyyy. Fixed a problem that could cause recursive trap evaluation of the RETURN
+      trap when using `eval return'.
+
+zzzz. Fixed a bug with expanding 0x01 in an unquoted here-document.
+
+aaaaa. The process substitution code now closes and unlinks FIFOs when the
+       process on the other side exits, in order to prevent SIGPIPE or
+       waiting until a FIFO opened for read has a writer.
+
+bbbbb. Fixed a bug with recursive calls to the parser overwriting the token in
+       an {id}>foo construct.
+
+ccccc. After a Posix discussion, the pattern matching engine just skips over
+       invalid character classes in bracket expressions, instead of matching
+       them like individual characters in the expression.
+
+ddddd. Fixed a posix-mode problem with variable scoping when creating variables
+       from assignment statements preceding special builtins.
+
+eeeee. Fixed a bug that could cause patterns containing backslashes to not be
+       run through the pattern matching engine.
+
+fffff. Fixed a bug that could cause redirections to compound commands to not
+       be `undone' if the file descriptor in the redirection was closed when
+       the redirection was initially processed.
+
+ggggg. Fixed a bug that could cause buffer corruption when using `bind -x' in
+       a command execute as a result of a key binding installed by `bind -x'.
+
+2.  Changes to Readline
+
+a. Added a guard to prevent nested macros from causing an infinite expansion
+   loop.
+
+b. Instead of allocating enough history list entries to hold the maximum list
+   size, cap the number allocated initially.
+
+c. Added a strategy to avoid allocating huge amounts of memory if a block of
+   history entries without timestamps occurs after a block with timestamps.
+
+d. Added support for keyboard timeouts when an ESC character is the last
+   character in a macro.
+
+e. There are several performance improvements when in a UTF-8 locale.
+
+f. Readline does a better job of preserving the original set of blocked
+   signals when using pselect() to wait for input.
+
+g. Fixed a bug that caused multibyte characters in macros to be mishandled.
+
+h. Fixed several bugs in the code that calculates line breaks when expanding
+   prompts that span several lines, contain multibyte characters, and contain
+   invisible character seqeuences.
+
+i. Fixed several bugs in cursor positioning when displaying lines with prompts
+   containing invisible characters and multibyte characters.
+
+j. When performing case-insensitive completion, Readline no longer sorts the
+   list of matches unless directed to do so.
+
+k. Fixed a problem with key sequences ending with a backslash.
+
+l. Fixed out-of-bounds and free memory read errors found via fuzzing.
+
+m. Fixed several cases where the mark was set to an invalid value.
+
+n. Fixed a problem with the case-changing operators in the case where the
+   lower and upper case versions of a character do not have the same number
+   of bytes.
+
+o. Handle incremental and non-incremental search character reads returning EOF.
+
+p. Handle the case where a failing readline command at the end of a multi-key
+   sequence could be misinterpreted.
+
+q. The history library now prints a meaningful error message if the history
+   file isn't a regular file.
+
+r. Fixed a problem with vi-mode redo (`.') on a command when trying to replace
+   a multibyte character.
+
+s. The key binding code now attempts to remove a keymap if a key unbinding
+   leaves it empty.
+
+t. Fixed a line-wrapping issue that caused problems for some terminal
+   emulators.
+
+u. If there is a key bound to the tty's VDISCARD special character, readline
+   disables VDISCARD while it is active.
+
+v. Fixed a problem with exiting bracketed paste mode on terminals that assume
+   the bracketed paste mode character sequence contains visible characters.
+
+w. Fixed a bug that could cause a key binding command to refer to an
+   uninitialized variable.
+
+3.  New Features in Bash
+
+a. The `wait' builtin can now wait for the last process substitution created.
+
+b. There is an EPOCHSECONDS variable, which expands to the time in seconds
+   since the Unix epoch.
+
+c. There is an EPOCHREALTIME variable, which expands to the time in seconds
+   since the Unix epoch with microsecond granularity.
+
+d. New loadable builtins: rm, stat, fdflags.
+
+e. BASH_ARGV0: a new variable that expands to $0 and sets $0 on assignment.
+
+f. When supplied a numeric argument, the shell-expand-line bindable readline
+   command does not perform quote removal and suppresses command and process
+   substitution.
+
+g. `history -d' understands negative arguments: negative arguments offset from
+   the end of the history list.
+
+h. The `name' argument to the `coproc' reserved word now undergoes word
+   expansion, so unique coprocs can be created in loops.
+
+i. A nameref name resolution loop in a function now resolves to a variable by
+   that name in the global scope.
+
+j. The `wait' builtin now has a `-f' option, which signifies to wait until the
+   specified job or process terminates, instead of waiting until it changes
+   state.
+
+k. There is a define in config-top.h that allows the shell to use a static
+   value for $PATH, overriding whatever is in the environment at startup, for
+   use by the restricted shell.
+
+l. Process substitution does not inherit the `v' option, like command
+   substitution.
+
+m. If a non-interactive shell with job control enabled detects that a foreground
+   job died due to SIGINT, it acts as if it received the SIGINT.
+
+n. The SIGCHLD trap is run once for each exiting child process even if job
+   control is not enabled when the shell is in Posix mode.
+
+o. A new shopt option: localvar_inherit; if set, a local variable inherits the
+   value of a variable with the same name at the nearest preceding scope.
+
+p. `bind -r' now checks whether a key sequence is bound before binding it to
+   NULL, to avoid creating keymaps for a multi-key sequence.
+
+q. A numeric argument to the line editing `operate-and-get-next' command
+   specifies which history entry to use.
+
+r. The positional parameters are now assigned before running the shell startup
+   files, so startup files can use $@.
+
+s. There is a compile-time option that forces the shell to disable the check
+   for an inherited OLDPWD being a directory.
+
+t. The `history' builtin can now delete ranges of history entries using
+   `-d start-end'.
+
+u. The `vi-edit-and-execute-command' bindable readline command now puts readline
+   back in vi insertion mode after executing commands from the edited file.
+
+v. The command completion code now matches aliases and shell function names
+   case-insensitively if the readline completion-ignore-case variable is set.
+
+w. There is a new `assoc_expand_once' shell option that attempts to expand
+   associative array subscripts only once.
+
+x. The shell only sets up BASH_ARGV and BASH_ARGC at startup if extended
+   debugging mode is active. The old behavior of unconditionally setting them
+   is available as part of the shell compatibility options.
+
+y. The `umask' builtin now allows modes and masks greater than octal 777.
+
+z. The `times' builtin now honors the current locale when printing a decimal
+   point.
+
+aa. There is a new (disabled by default, undocumented) shell option to enable
+    and disable sending history to syslog at runtime.
+
+4.  New Features in Readline
+
+a. Non-incremental vi-mode search (`N', `n') can search for a shell pattern, as
+   Posix specifies (uses fnmatch(3) if available).
+
+b. There are new `next-screen-line' and `previous-screen-line' bindable
+   commands, which move the cursor to the same column in the next, or previous,
+   physical line, respectively.
+
+c. There are default key bindings for control-arrow-key key combinations.
+
+d. A negative argument (-N) to `quoted-insert' means to insert the next N
+   characters using quoted-insert.
+
+e. New public function: rl_check_signals(), which allows applications to
+   respond to signals that readline catches while waiting for input using
+   a custom read function.
+
+f. There is new support for conditionally testing the readline version in an
+   inputrc file, with a full set of arithmetic comparison operators available.
+
+g. There is a simple variable comparison facility available for use within an
+   inputrc file. Allowable operators are equality and inequality; string
+   variables may be compared to a value; boolean variables must be compared to
+   either `on' or `off'; variable names are separated from the operator by
+   whitespace.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-4.4-release, and
+the previous version, bash-4.4-rc2.
+
+1.  Changes to Bash
+
+a.  Fixed a bug that could potentially result in a crash due to an integer
+    overflow.
+
+b.  Fixed a bug in where commands printed due to `set -x' could be incorrectly
+    quoted if being printed in contexts where they haven't yet been expanded.
+
+c.  Fixed several memory leaks.
+
+d.  Fixed a bug that could potentially cause the terminal attributes to be
+    set incorrectly by a command run from a programmable completion.
+
+e.  Fixed several potential buffer overflow issues in the word expansion code.
+
+2.  Changes to Readline
+
+3.  New Features in Bash
+
+4.  New Features in Readline
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-4.4-rc2, and
+the previous version, bash-4.4-beta2.
+
+1.  Changes to Bash
+
+a.  Fixed an out-of-bounds read in the redirection operator completion code.
+
+b.  Fixed execution context so `until continue' doesn't disable execution for
+    subsequent commands.
+
+c.  Fixed trap handling code so traps don't inherit a command's temporary
+    environment.
+
+d.  Fixed a bug that resulted in incorrect line numbers when a function is
+    defined as part of another function's execution.
+
+e.  Fixed a bug in the expansion of ${a[@]} in contexts where word splitting
+    is not performed and $IFS is not the default.
+
+f.  Fixed a bug that caused ''"$@" to not expand to an empty argument when
+    there are no positional parameters.
+
+g.  Fixed a bug that caused a shell compiled without job control to use the
+    incorrect exit status for builtin commands preceded by a command executed
+    from the file system that causes the shell to call waitpid().
+
+h.  Improved word completion for quoted strings containing unterminated command
+    substitutions with embedded double quotes.
+
+2.  Changes to Readline
+
+a.  Fixed a bug that caused mode strings to be displayed incorrectly if the
+    prompt was shorter than the mode string.
+
+3.  New Features in Bash
+
+a.  Using ${a[@]} or ${a[*]} with an array without any assigned elements when
+    the nounset option is enabled no longer throws an unbound variable error.
+
+4.  New Features in Readline
+
+a.  New application-callable function: rl_pending_signal(): returns the signal
+    number of any signal readline has caught but not yet handled.
+
+b.  New application-settable variable: rl_persistent_signal_handlers: if set
+    to a non-zero value, readline will enable the readline-6.2 signal handler
+    behavior in callback mode: handlers are installed when
+    rl_callback_handler_install is called and removed removed when a complete
+    line has been read.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-4.4-beta2, and
+the previous version, bash-4.4-rc1.
+
+1.  Changes to Bash
+
+a.  Fixed a memory leak when processing ${!var[@]}.
+
+b.  Fixed a bug that caused subshells to free trap strings associated with
+    inherited signals.
+
+c.  Inheriting BASHOPTS from the environment now works to force actions
+    associated with enabling an option, instead of just marking the option
+    as enabled.
+
+d.  Fixed a bug that allowed assignments to BASH_CMDS when the shell was in
+    restricted mode.
+
+e.  Fixed a bug caused by an accidental omission of part of the original patch
+    for EXECIGNORE.
+
+e.  Prompt expansion now quotes the results of the \s, \h, and \H expansions.
+
+f.  Fixed a bug that caused parsing errors in command substitutions with
+    consecutive case statements separated by newlines.
+
+g.  Updated logic used to decide whether bash is running inside an emacs
+    terminal emulator to work with future emacs versions.
+
+h.  Fixed two extended pattern matching bugs caused by premature short-
+    circuiting.
+
+i.  Fixed a memory leak in the code that removes duplicate history entries.
+
+j.  There are a number of bug fixes to coproc, mapfile, declare, unset,
+    and assignment statements that prevent nameref variables from creating
+    and unsetting variables with invalid names.
+
+k.  Fixed a bug that caused variables to be inadvertently marked as both an
+    associative and an indexed array.
+
+l.  Fixed a bug that caused `bash -c' to not run a trap specified in the
+    command string.
+
+j.  There are a number of bug fixes to coproc, mapfile, declare, and assignment
+    statements that prevent nameref variables from overwriting or modifying
+    attributes of readonly variables.
+
+k.  Fixed a bug that caused command substitution to attempt to set the
+    terminal's process group incorrectly.
+    
+l.  Fixed a bug that could cause prompt string expansion to display error
+    messages when the `nounset' shell option is set.
+
+m.  Fixed a bug that caused "$@" to not expand to an empty string under the
+    circumstances when Posix says it should ("${@-${@-$@}}").
+
+n.  Fixed several bugs caused by referencing nameref variables whose values
+    are names of unset variables (or names that are valid for referencing
+    but not assignment), including creating variables in the temporary
+    environment.
+
+o.  Function tracing and error tracing are disabled if --debugger is supplied
+    at startup but the shell can't find the debugger start file.
+
+p.  Fixed a bug when IFS is used as the control variable in a for statement.
+
+q.  Fixed a bug with SIGINT received by a command substitution in an interactive
+    shell.
+
+r.  The checks for nameref variable self-references are more thorough.
+
+s.  Fixed several bugs with multi-line aliases.
+
+t.  Fixed `test' to handle the four-argument case where $1 == '(' and
+    $4 == ')'.
+
+u.  Fixed a bug in the expansion of $* in the cases where word splitting is
+    not performed.
+
+v.  Fixed a bug in execution of case statements where IFS includes the
+    pattern matching characters.
+
+2.  Changes to Readline
+
+a.  When refreshing the line as the result of a key sequence, Readline attempts
+    to redraw only the last line of a multiline prompt.
+
+b.  Fixed an issue that caused completion of git commands to display
+    incorrectly when using colored-completion-prefix.
+
+c.  Fixed several redisplay bugs having to do with multibyte characters and
+    invisible characters in prompt strings.
+
+3.  New Features in Bash
+
+a.  Value conversions (arithmetic expansions, case modification, etc.) now
+    happen when assigning elements of an array using compound assignment.
+
+b.  There is a new option settable in config-top.h that makes multiple
+    directory arguments to `cd' a fatal error.
+
+c.  Bash now uses mktemp() when creating internal temporary files; it produces
+    a warning at build time on many Linux systems.
+
+4.  New Features in Readline
+
+a.  The default binding for ^W in vi mode now uses word boundaries specified
+    by Posix (vi-unix-word-rubout is bindable command name).
+
+b.  rl_clear_visible_line: new application-callable function; clears all
+    screen lines occupied by the current visible readline line.
+
+c.  rl_tty_set_echoing: application-callable function that controls whether
+    or not readline thinks it is echoing terminal output.
+
+d.  Handle >| and strings of digits preceding and following redirection
+    specifications as single tokens when tokenizing the line for history
+    expansion.
+
+e.  Fixed a bug with displaying completions when the prefix display length
+    is greater than the length of the completions to be displayed.
+
+f.  The :p history modifier now applies to the entire line, so any expansion
+    specifying :p causes the line to be printed instead of expanded.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-4.4-rc1, and
+the previous version, bash-4.4-beta.
+
+1.  Changes to Bash
+
+a.  Fixed several problems with bash completion not special-casing bash syntax
+    constructs.
+
+b.  Fixed a bug that caused the mapfile builtin to not create array variables
+    when a variable of the same name appears in the temporary environment.
+
+c.  Fixed a bug that caused prompt expansion to loop when PS1 contained a
+    syntax error.
+
+d.  Fixed a bug that caused the ${array[@]@A} expansion to split the results
+    even when double-quoted.
+
+e.  There is a new implementation of the code that saves the last CHILD_MAX
+    exited background pids so their status can be queried later.
+
+f.  Bash-4.4 can now be configured and built on very old versions of Solaris 2.
+
+g.  Fixed problems with --help support for several builtins.
+
+h.  Fixed values added to BASH_SOURCE and BASH_LINENO for functions inherited
+    from the environment.
+
+i.  Fixed a bug that caused background processes run from non-interactive shells
+    with job control enabled to place the terminal in the wrong process group
+    under certain circumstances.
+
+j.  Fixed a bug that caused `fc' to return an incorrect exit status when
+    executing commands from the history list.
+
+k.  Fixed a bug that caused the shell to exit when a process substitution
+    received a SIGINT when run in certain terminal emulators.
+
+l.  EXECIGNORE now honors the setting of `extglob' when attempting to match
+    executable names.
+
+m.  Fixed a bug where `return' used the wrong exit status when executed in a
+    DEBUG trap.
+
+n.  Fixed a bug that caused a command containing a here-document and an escaped
+    newline to be stored in the history list incorrectly.
+
+o.  Fixed a bug that caused set -e to be honored in cases of builtins invoking
+    other builtins when it should be ignored.
+
+p.  Fixed a bug that caused `readonly' and `export' to create local array
+    variables when used within shell functions.
+
+q.  Fixed a bug that allowed subshells begun to execute process substitutions
+    to have access to the command's temporary environment.
+
+r.  Fixed a bug that could cause the shell to dump core when receiving a
+    SIGCHLD for which a trap has been set while running in posix mode.
+
+s.  Fixed a bug that caused bash to not restore BASH_ARGC, BASH_ARGV,
+    BASH_SOURCE, BASH_LINENO, and FUNCNAME if the shell received a SIGINT
+    while reading commands from a file while executing  `.'.
+
+t.  Fixed a bug that caused the `-o history' option to have no effect when
+    supplied on the command line when starting a new shell.
+
+u.  Fixed a bug that caused history expansions occurring in command
+    substitutions to not be performed.
+
+v.  Fixed a bug that caused `eval' run in a non-interactive shell to disable
+    history expansion for the remainder of the shell script, even if the script
+    had previously enabled it.
+
+w.  Fixed a bug that caused "$@" to not expand to multiple words when IFS is set
+    to the empty string.
+
+x.  Fixed a bug that caused process and command substitution to inherit output
+    buffered in the stdio library but not written.
+
+y.  Fixed a bug that caused a terminating signal received during `echo' to run
+    an exit trap in a signal handler context.
+
+z.  Fixed a bug that caused a builtin command containing a process substitution
+    to return the wrong exit status.
+
+aa. Fixed a bug that caused `()' subshells with piped input to incorrectly
+    redirect the standard input of some of the commands in the subshell from
+    /dev/null.
+
+bb. The history builtin now uses more descriptive error messages for missing or
+    invalid timestamps.
+
+2.  Changes to Readline
+
+a.  The history file writing functions only attempt to create and use a backup
+    history file if the history file exists and is a regular file.
+
+b.  Fixed an out-of-bounds read in readline's internal tilde expansion
+    interface.
+
+c.  Fixed several redisplay bugs with prompt strings containing multibyte
+    and non-visible characters whose physical length is longer than the screen
+    width.
+
+d.  Fixed a redisplay bug with prompt strings containing invisible characters
+    whose physical length exceeds the screen width and using incremental search.
+
+e.  Readline prints more descriptive error messages when it encounters errors
+    while reading an inputrc file.
+
+f.  Fixed a bug in the character insertion code that attempts to optimize
+    typeahead when it reads a character that is not bound to self-insert and
+    resets the key sequence state.
+
+3.  New Features in Bash
+
+a.  BASH_COMPAT and FUNCNEST can be inherited and set from the shell's initial
+    environment.
+
+b.  inherit_errexit: a new `shopt' option that, when set, causes command
+    substitutions to inherit the -e option.  By default, those subshells disable
+    -e.  It's enabled as part of turning on posix mode.
+
+c.  New prompt string: PS0.  Expanded and displayed by interactive shells after
+    reading a complete command but before executing it.
+
+d.  Interactive shells now behave as if SIGTSTP/SIGTTIN/SIGTTOU are set to
+    SIG_DFL when the shell is started, so they are set to SIG_DFL in child
+    processes.
+
+e.  Posix-mode shells now allow double quotes to quote the history expansion
+    character.
+
+f.  OLDPWD can be inherited from the environment if it names a directory.
+
+g.  Shells running as root no longer inherit PS4 from the environment, closing
+    a security hole involving PS4 expansion performing command substitution.
+
+h.  If executing an implicit `cd' when the `autocd' option is set, bash will
+    now invoke a function named `cd' if one exists before executing the `cd'
+    builtin.
+
+4.  New Features in Readline
+
+a.  If an incremental search string has its last character removed with DEL,
+    the resulting empty search string no longer matches the previous line.
+
+b.  If readline reads a history file that begins with `#' (or the value of
+    the history comment character) and has enabled history timestamps, the
+    history entries are assumed to be delimited by timestamps.  This allows
+    multi-line history entries.
+
+c.  Readline now throws an error if it parses a key binding without a
+    terminating `:' or whitespace.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-4.4-beta, and
+the previous version, bash-4.4-alpha.
+
+1.  Changes to Bash
+
+a.  Fixed two bugs that caused out-of-bounds reads when skipping over assignment
+    statements while finding the word on which to perform programmable
+    completion.
+
+b.  Fixed a memory leak in programmable completion.
+
+c.  Fixed a bug that could cause the shell to crash when interrupting the
+    wait builtin.
+
+d.  Fixed a bug that caused ${!vvv@} to be interpreted as introducing the new
+    `@' operator.
+
+e.  Fixed a bug that caused the && and || operators to be incorrectly optimized.
+
+f.  The shell now undoes redirections before exiting the shell when the `-e'
+    option is enabled, and a shell function fails.
+
+g.  History expansion now skips over the history expansion character in command
+    and process substitution.
+
+h.  Fixed a bug that caused stray '\001' characters to be added to the output
+    of `declare -p'.
+
+i.  Fixed a memory leak when processing declare commands that perform compound
+    array assignments.
+
+j.  Fixed a bug that could cause the shell to crash when reading input from a
+    file and the limit on open file descriptors is high.
+
+k.  Fixed a bug that caused the ERR and RETURN traps to be unset if they were
+    set in a shell function but unset previously.
+
+l.  Fixed a bug that caused several signals to be ignored if `exec' failed in
+    an interactive shell.
+
+m.  A posix-mode non-interactive shell now considers a parameter expansion error
+    to be a fatal error.
+
+n.  The `time' command now prints timing statistics for failed commands when
+    the -e option is enabled.
+
+o.  Fixed a bug that caused the shell to crash when attempting to indirectly
+    expand a shell variable with an invalid name.
+
+p.  Fixed a bug that caused the shell to crash when running a trap containing
+    a process substitution.
+
+q.  Bash now prints the keyword `function' before a function with the same name
+    as a reserved word when using `declare -f' to avoid parse errors when
+    reusing the output as input.
+
+r.  Fixed a bug that caused the shell to crash when using declare -g to attempt
+    to redefine an existing global indexed array variable as an associative
+    array.
+
+s.  Fixed a memory leak that occurred when interrupting brace expansions
+    generating a sequence.
+
+t.  Fixed a bug that resulted in alias expansion in redirections.
+
+u.  The `declare -a' and `declare -A' commands now print fewer warnings when
+    attempting to create and initialize an array at the same time, but
+    relying on word expansions to construct the compound assignment.
+
+v.  The `help' builtin now behaves better in locales where each wide
+    character occupies more than one display column.
+
+w.  The `read' builtin no longer has a possible race condition when a timeout
+    occurs.
+
+x.  Fixed several expansion problems encountered when IFS="'".
+
+y.  Fixed a problem with the expansion of $'\c?'.
+
+z.  Bash no longer splits the expansion of here-strings, as the documentation
+    has always said.
+
+aa. Bash now puts `s' in the value of $- if the shell is reading from standard
+    input, as Posix requires.
+
+bb. Fixed a bug that caused the shell to crash if invoked with a NULL
+    environment.
+
+cc. The shell now only trusts an inherited value for $PWD if it begins with a
+    `/'.
+
+dd. Fixed a memory leak when creating local array variables and assigning to
+    them using compound assignment with the `declare' builtin.
+
+ee. Fixed a bug that could cause the shell to crash when processing nested here
+    documents inside a command substitution.
+
+ff. Array keys and values are now displayed using $'...' quoting where
+    appropriate.
+
+gg. Fixed a bug that could cause the shell to crash if the replacement string
+    in pattern substitution was NULL.
+
+hh. Fixed a bug that could cause the shell to crash if a command substitution
+    contained a non-fatal syntax error.
+
+ii. Fixed a bug that could cause the shell to crash if variable indirection
+    resulted in a NULL variable.
+
+jj. Fixed a bug that could cause the shell to crash if a long string contained
+    multiple unterminated parameter expansion constructs.
+
+kk. Improved the code that acts on SIGINT received while waiting for a child
+    process only if the child exits due to SIGINT.
+
+ll. $BASH_SUBSHELL now has more consistent values in asynchronous simple
+    commands.
+
+2.  Changes to Readline
+
+a.  Colored completion prefixes are now displayed using a different color, less
+    likely to collide with files.
+
+b.  Fixed a bug that caused vi-mode character search to misbehave when
+    running in callback mode.
+
+c.  Fixed a bug that caused output to be delayed when input is coming from a
+    macro in vi-mode.
+
+d.  Fixed a bug that caused the vi-mode `.' command to misbehave when redoing
+    a multi-key key sequence via a macro.
+
+e.  Fixed a bug that caused problems with applications that supply their own
+    input function when performing completion.
+
+f.  When read returns -1/EIO when attempting to read a key, return an error
+    instead of line termination back to the caller.
+
+g.  Updated tty auditing feature based on patch from Red Hat.
+
+h.  Fixed a bug that could cause the history library to crash on overflows
+    introduced by malicious editing of timestamps in the history file.
+
+3.  New Features in Bash
+
+a.  `make install' now installs the example loadable builtins and a set of
+    bash headers to use when developing new loadable builtins.
+
+b.  `enable -f' now attempts to call functions named BUILTIN_builtin_load when
+    loading BUILTIN, and BUILTIN_builtin_unload when deleting it.  This allows
+    loadable builtins to run initialization and cleanup code.
+
+c.  There is a new BASH_LOADABLES_PATH variable containing a list of directories
+    where the `enable -f' command looks for shared objects containing loadable
+    builtins.
+
+d.  The `complete_fullquote' option to `shopt' changes filename completion to
+    quote all shell metacharacters in filenames and directory names.
+
+e.  The `kill' builtin now has a `-L' option, equivalent to `-l', for
+    compatibility with Linux standalone versions of kill.
+
+4.  New Features in Readline
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-4.4-alpha, and
+the previous version, bash-4.3-release.
+
+1.  Changes to Bash
+
+a.  A bug that caused pipelines to be corrupted while running the DEBUG trap
+    was fixed.
+
+b.  A bug that accidentally omitted the `-R' unary operator from `test' was
+    fixed.
+
+c.  A bug that could cause the shell to not restore the terminal's process
+    group on shell exit was fixed.
+
+d.  Several changes were made to programmable completion to accommodate
+    assumptions made by the bash-completion package.
+
+e.  Bash no longer inhibits C-style escape processing ($'...') while performing
+    pattern substitution word expansions.
+
+f.  Fixed a bug that caused `return' executed from a trap handler to use the
+    wrong return status when one was not supplied as an argument.
+
+g.  In Posix mode, defining a function with the same name as a special
+    builtin is now an error, fatal only when the shell is not interactive.
+
+h.  Fixed a bug that caused compound array assignments to discard unset or null
+    variables used as subscripts, thereby making it appear as if the index was
+    not present.
+
+i.  Fixed a bug that caused extended glob patterns to incorrectly match
+    filenames with a leading `.'.
+
+j.  Fixed a bug involving sign extension when reallocating the input line
+    after a history expansion, causing segmentation faults.
+
+k.  Bash now does a better job at identifying syntax errors during word
+    completion and tailoring completion appropriately.
+
+l.  Bash now uses the current locale's decimal point in command timing output.
+
+m.  Fixed a bug that caused segmentation faults while reading here documents if
+    PS2 contains a command substitution.
+
+n.  There are several changes to how $@ is expanded when unquoted but in a
+    context where word splitting is not performed (e.g., on the rhs of an
+    assignment or in a conditional command).
+
+o.  Bash now quotes command hash table entries that contain shell metacharacters
+    when displaying hash table contents.
+
+p.  Fixed a potential file descriptor leak when dup2() fails while performing a
+    redirection.
+
+q.  Fixed a bug that caused directory names evaluated during word completion to
+    be dequoted twice.
+
+r.  Fixed several bugs which could result in indirect variable expansion and
+    namerefs creating variables with invalid names or referencing variables
+    set to the empty string.
+
+s.  Fixed a bug that caused bash to not expand $0 in word expansions where it
+    should.
+
+t.  Fixed a bug that caused bash to perform process substitution if <(
+    appeared inside an arithmetic context.
+
+u.  Fixed a bug in extglob pattern parsing that caused slashes in the pattern
+    to be confused as directory names.
+
+v.  Fixed several bugs with treatment of invisible variables (variables with
+    attributes that are unset because they have never been assigned values).
+
+w.  Fixed a bug that caused the `read' builtin to not clean up readline's
+    state when using the -e and -t options together and the read timed out.
+
+x.  Fixed a bug that caused the shell to exit with the wrong (but non-zero)
+    value if a command was not found or was not executable.
+
+y.  Fixed a bug that caused the `time' reserved word to not be recognized as
+    such in all contexts where it should have been.
+
+z.  Fixed a bug that caused the shell to close process substitution file
+    descriptors when executing a script without the `#!' leading line.
+
+aa. Fixed a typo that caused the `compat42' shell option to set the wrong
+    compatibility level.
+
+bb. The shell now handles process substitution commands with embedded
+    parentheses the same way as it does when parsing command substitution.
+
+cc. Fixed a bug that caused nested pipelines and the `lastpipe' shell option
+    to produce core dumps.
+
+dd. Fixed a bug that caused patterns containing `*' to match pathnames in cases
+    where slashes must be matched explicitly.
+
+ee. Fixed a problem with patterns containing `:' in colon-separated variables
+    like GLOBIGNORE. 
+
+ff. Fixed a bug that caused indirect variable expansion using indexed arrays to
+    always use index 0.
+
+gg. Fixed a parsing problem that caused quoted newlines immediately following a
+    command substitution to be mishandled in certain cases.
+
+hh. Fixed a potential buffer overflow on systems without locale_charset or the
+    bash replacement.
+
+ii. Fixed a bug that caused background processes to modify the terminal's
+    process group under certain circumstances.
+
+jj. Asynchronous commands now always set $? to 0 and are not affected by
+    whether or not the command's exit status is being inverted.
+
+kk. Fixed a problem that caused a line ending with an escaped newline and
+    containingh a prior `eval' to be incorrectly parsed.
+
+ll. Fixed an issue with programmable completion and `!' in extglob patterns
+    used as arguments to `compgen -X'.
+
+mm. Word completion now treats the two-character token `>|' as requiring
+    filename expansion.
+
+nn. Bash no longer expands tildes in $PATH elements while in Posix mode.
+
+oo. Fixed a bug that caused bash to not clean up readline's state, including
+    the terminal settings, if it received a fatal signal while in a readline()
+    call (including `read -e' and `read -s').
+
+pp. Fixed bug that caused importing shell functions from the environment to
+    execute additional commands following the function.
+
+qq. Fixed a bug that caused the parser to return a lookahead character pushed
+    back by a previous call, even when on another line.
+
+rr. Fixed a bug that caused many here-documents or many nested case statements
+    to overflow an internal stack.
+
+ss. Changed the way bash encodes exported functions for inclusion in the
+    environment to avoid name collisions with valid variable names and to
+    indicate that they are exported functions.
+
+tt. Fixed a bug that could result in an invalid memory access when processing
+    a here document delimited by end of file or end of string.
+
+uu. Fixed a bug that could cause an invalid memory access if a command was run
+    before initializing the job control framework.
+
+vv. When in Posix mode, bash prints shell function definitions as Posix
+    specifies them, without the leading `function' keyword.
+
+ww. The variable attribute display builtins no longer display variables with
+    invalid names that were imported from the environment.
+
+xx. Fixed a bug that could allow `break' or `continue' executed from shell
+    functions to affect loops running outside of the function.
+
+yy. Fixed a bug that could cause a restricted shell to attempt to import shell
+    functions from the environment.
+
+zz. The shell now allows double-quoted identifiers in arithmetic expressions.
+
+aaa. Fixed a bug that could allow scalar variables subscripted using [@] in
+     word expansions to be incorrectly quoted.
+
+bbb. The shell now makes sure to ignore SIGTSTP/SIGTTIN/SIGTTOU in child
+     processes if they were ignored at shell startup, even if job control is
+     in effect.
+
+ccc. Fixed a bug that could cause $* to be split on spaces when IFS is set to
+     the empty string.
+
+ddd. Posix says that expanding $* in a pattern context where the expansion is
+     double-quoted should not treat $* as if it were double quoted.
+
+eee. Bash now restores getopts' internal state between calls to getopts even if
+     a shell function declares a local copy of OPTIND.
+
+fff. Fixed a bug that could cause `history -r' or `history -n' to read identical
+     lines from the history file more than once.
+
+ggg. The commands executed by `bind -x' now redisplay at most the final line
+     of a multi-line prompt, and those commands may return 124 to indicate that
+     the entire prompt should be redrawn.
+
+hhh. Fixed a bug that could cause `mapfile' to create variables with invalid
+     names.
+
+iii. The shell only goes into debugging mode when --debugger is supplied if
+     the debugger initialization file is present.
+
+jjj. Fixed a bug that disallowed an assignment to (implicit) subscript 0 of an
+     existing array in a declare command that set the readonly attribute.
+
+kkk. Fixed a bug that inadvertently allowed assignments to FUNCNAME to disable
+     its special status.
+
+lll. Appending to an existing array variable using the compound assignment
+     syntax (var+=(aaa)) should not affect assignments to existing subscripts
+     appearing in the compound assignment.
+
+mmm. Fixed a bug that could cause the shell to crash when a variable with a
+     null value was passed in the temporary environment and the variable's
+     attributes are modified using `declare' while performing a redirection.
+
+nnn. Fixed a bug in printf so that a missing precision specifier after a `.'
+     is treated as 0.
+
+ooo. Fixed a bug that attempted to use the internal command timing to time
+     pipeline components if the pipeline elements are separated by newlines.
+
+ppp. Fixed a bug that caused `declare -al foo=(ONE TWO THREE)' to not lowercase
+     the values on assignment.
+
+qqq. Bash does a better job of determining whether or not files are executable
+     when running on Windows, since the X_OK flag to access(2) is not supported.
+
+rrr. Fixed a bug that caused some of the shell's internal traps (e.g., ERR) to
+     be interrupted (and leave incorrect state) by pending SIGINTs.
+
+sss. Fixed a bug in the bash interface to history expansion to avoid attempting
+     expansion if the history expansion character occurs in a command
+     substitution.
+
+ttt. Fixed a bug that caused the select command to crash if the REPLY variable
+     ends up empty (e.g., if it's made readonly)
+
+uuu. Bash handles backslash-quoting of multibyte characters better when quoting
+     output that is intended to be reused.
+
+vvv. System-specific changes for: Windows, Cygwin.
+
+www. Fixes for upper and lower-casing multibyte characters, some locales have
+     characters whose upper and lowercase versions have different numbers of
+     bytes.
+
+xxx. Fixed a bug that caused the ERR trap in a shell function to have the
+     wrong value for $LINENO.
+
+yyy. Fixed a bug that resulted in incorrect quoting of regexps for the =~
+     operator when an open brace appears without a close brace.
+
+zzz. Fixed a bug in the array unset operation that caused it to attempt to
+     parse embedded single and double quotes.
+
+aaaa. Fixed a bug that caused $* to not expand with the first character of
+      $IFS as a separator in a context where word splitting will not take
+      place.
+
+bbbb. Fixed two bugs that could cause the shell to dereference a null pointer
+      while attempting to print an error message from arithmetic expansion.
+
+cccc. Fixed a bug that resulted in short-circuited evaluation when reading
+      commands from a string ending in an unquoted backslash, or when sourcing
+      a file that ends with an unquoted backslash.
+
+dddd. Fixed a bug that resulted in the no-fork optimization not cleaning up
+      any FIFOs created by process substitution.
+
+eeee. If the -T option is not set, allow the source builtin and shell functions
+      to set a DEBUG trap that persists after the sourced file or function
+      returns, instead of restoring the old (unset) value unconditionally.
+
+ffff. Fixed a bug that caused redirections to not be undone on some syntax
+      errors, e.g., when parsing a command substitution.
+
+gggg. Bash only adds asynchronous commands to the table of background pids
+      whose status it remembers, to avoid it growing too large during scripts
+      that create and reap large numbers of child processes.  This means that
+      `wait' no longer works on synchronous jobs, but $? can be used to get
+      the exit status in those cases.
+
+hhhh. Bash now checks whether or not a shell script argument is a directory
+      before trying to open it; Posix says implementations may allow open(2)
+      on a directory.
+
+iiii. Fixed a bug that could cause the shell to set the terminal's process
+      group to a background process group when running as part of a pipeline.
+
+jjjj. Made a few changes to strings to avoid possible potential negative effects
+      caused by malicious translations.
+
+kkkk. Fixed a bug that caused the `unset' builtin to continue to treat its
+      arguments as functions after unsetting a function when invoked with no
+      options.
+
+llll. Fixed a bug that would not replace empty strings using pattern
+      substitution even if the pattern matched the empty string.
+
+mmmm. Fixed a bug with word completion that prevented some characters from
+      being backslash-quoted (backquote, dollar sign).
+
+nnnn. Fixed a bug that prevented a command from the history re-executed by the
+      `fc' builtin from setting verbose mode.
+
+oooo. Fixed a bug that caused the shell to not enable and disable function
+      tracing with changes to the `extdebug' shell option.
+
+pppp. Fixed a bug that caused assignments to nameref variables pointing to
+      unset variables with attributes but no values to create variables with
+      incorrect names.
+
+qqqq. Fixed a bug that caused `unset' on nameref variables (without -n) to
+      unset the wrong variable under certain circumstances.
+
+rrrr. Fixed a bug that caused close braces occurring in brace expansions within
+      command substitutions to incorrectly terminate parameter expansions.
+
+ssss. Fixed a bug that caused `command -p' to temporarily alter $PATH.
+
+tttt. Fixed a bug that caused interactive shells compiled without job control
+      to return incorrect status values for child processes when running a
+      single command that creates enough children to use the entire PID space.
+
+uuuu. `esac' should not be recognized as a reserved word when it appears as the
+      second or later pattern in a case statement pattern list.
+
+vvvv. Fixed a bug that caused the completion code to read past the end of the
+      readline line buffer while skipping assignment statements to find the
+      command name.
+
+wwww. Fixed a bug that caused case statements within loops contained in a
+      command substitution to be parsed incorrectly.
+
+xxxx. Fixed a bug that could cause SIGCHLD handling to be delayed after
+      running `wait' with no arguments and interrupting it with ^C without
+      a trap handler installed.
+
+2.  Changes to Readline
+
+a.  A bug that caused vi-mode `.' to be unable to redo `c', `d', and `y'
+    commands with modifiers was fixed.
+
+b.  Fixed a bug that caused callback mode to dump core when reading a
+    multiple-key sequence (e.g., arrow keys).
+
+c.  Fixed a bug that caused the redisplay code to erase some of the line when
+    using horizontal scrolling with incremental search.
+
+d.  Readline's input handler now performs signal processing if read(2) is
+    interrupted by SIGALRM or SIGVTALRM.
+
+e.  Fixed a problem with revert-all-at-newline freeing freed memory.
+
+f.  Clarified the documentation for the history_quotes_inhibit_expansion
+    variable to note that it inhibits scanning for the history comment
+    character and that it only affects double-quoted strings.
+
+g.  Fixed an off-by-one error in the prompt printed when performing searches.
+
+h.  Use pselect(2), if available, to wait for input before calling read(2), so
+    a SIGWINCH can interrupt it, since it doesn't interrupt read(2).
+
+i.  Some memory leaks caused by signals interrupting filename completion have
+    been fixed.
+
+j.  Reading EOF twice on a non-empty line causes EOF to be returned, rather
+    than the partial line.  This can cause partial lines to be executed on
+    SIGHUP, for example.
+
+k.  Fixed a bug concerning deleting multibyte characters from the search
+    string while performing an incremental search.
+
+l.  Fixed a bug with tilde expanding directory names in filename completion.
+
+m.  Fixed a bug that did not allow binding sequences beginning with a `\'.
+
+n.  Fixed a redisplay bug involving incorrect line wrapping when the prompt
+    contains a multibyte character in the last screen column.
+
+o.  Fixed a bug that caused history expansion to disregard characters that are
+    documented to delimit a history event specifier without requiring `:'.
+
+p.  Fixed a bug that could cause reading past the end of a string when reading
+    the value when binding the set of isearch terminators.
+
+q.  Fixed a bug that caused readline commands that depend on knowing which
+    key invoked them to misbehave when dispatching key sequences that are
+    prefixes of other key bindings.
+
+r.  Paren matching now works in vi insert mode.
+
+3.  New Features in Bash
+
+a.  There is now a settable configuration #define that will cause the shell
+    to exit if the shell is running setuid without the -p option and setuid
+    to the real uid fails.
+
+b.  Command and process substitutions now turn off the `-v' option when
+    executing, as other shells seem to do.
+
+c.  The default value for the `checkhash' shell option may now be set at
+    compile time with a #define.
+
+d.  The `mapfile' builtin now has a -d option to use an arbitrary character
+    as the record delimiter, and a -t option  to strip the delimiter as
+    supplied with -d.
+
+e.  The maximum number of nested recursive calls to `eval' is now settable in
+    config-top.h; the default is no limit.
+
+f.  The `-p' option to declare and similar builtins will display attributes for
+    named variables even when those variables have not been assigned values
+    (which are technically unset).
+
+g.  The maximum number of nested recursive calls to `source' is now settable
+    in config-top.h; the default is no limit.
+
+h.  All builtin commands recognize the `--help' option and print a usage
+    summary.
+
+i.  Bash does not allow function names containing `/' and `=' to be exported.
+
+j.  The `ulimit' builtin has new -k (kqueues) and -P (pseudoterminals) options.
+
+k.  The shell now allows `time ; othercommand' to time null commands.
+
+l.  There is a new `--enable-function-import' configuration option to allow
+    importing shell functions from the environment; import is enabled by
+    default.
+
+m.  `printf -v var ""' will now set `var' to the empty string, as if `var=""'
+    had been executed.
+
+n.  GLOBIGNORE, the pattern substitution word expansion, and programmable
+    completion match filtering now honor the value of the `nocasematch' option.
+
+o.  There is a new ${parameter@spec} family of operators to transform the
+    value of `parameter'.
+
+p.  Bash no longer attempts to perform compound assignment if a variable on the
+    rhs of an assignment statement argument to `declare' has the form of a
+    compound assignment (e.g., w='(word)' ; declare foo=$w); compound
+    assignments are accepted if the variable was already declared as an array,
+    but with a warning.
+
+q.  The declare builtin no longer displays array variables using the compound
+    assignment syntax with quotes; that will generate warnings when re-used as
+    input, and isn't necessary.
+
+r.  Executing the rhs of && and || will no longer cause the shell to fork if
+    it's not necessary.
+
+s.  The `local' builtin takes a new argument: `-', which will cause it to save
+    the single-letter shell options and restore their previous values at
+    function return.
+
+t.  `complete' and `compgen' have a new `-o nosort' option, which forces
+    readline to not sort the completion matches.
+
+u.  Bash now allows waiting for the most recent process substitution, since it
+    appears as $!.
+
+v.  The `unset' builtin now unsets a scalar variable if it is subscripted with
+    a `0', analogous to the ${var[0]} expansion.
+
+w.  `set -i' is no longer valid, as in other shells.
+
+x.  BASH_SUBSHELL is now updated for process substitution and group commands
+    in pipelines, and is available with the same value when running any exit
+    trap.
+
+y.  Bash now checks $INSIDE_EMACS as well as $EMACS when deciding whether or
+    not bash is being run in a GNU Emacs shell window.
+
+z.  Bash now treats SIGINT received when running a non-builtin command in a
+    loop the way it has traditionally treated running a builtin command:
+    running any trap handler and breaking out of the loop.
+
+aa. New variable: EXECIGNORE; a colon-separate list of patterns that will
+    cause matching filenames to be ignored when searching for commands.
+
+bb. Aliases whose value ends in a shell metacharacter now expand in a way to
+    allow them to be `pasted' to the next token, which can potentially change
+    the meaning of a command (e.g., turning `&' into `&&').
+
+4.  New Features in Readline
+
+a.  The history truncation code now uses the same error recovery mechanism as
+    the history writing code, and restores the old version of the history file
+    on error.  The error recovery mechanism handles symlinked history files.
+
+b.  There is a new bindable variable, `enable-bracketed-paste', which enables
+    support for a terminal's bracketed paste mode.
+
+c.  The editing mode indicators can now be strings and are user-settable
+    (new `emacs-mode-string', `vi-cmd-mode-string' and `vi-ins-mode-string'
+    variables).  Mode strings can contain invisible character sequences.
+    Setting mode strings to null strings restores the defaults.
+
+d.  Prompt expansion adds the mode string to the last line of a multi-line
+    prompt (one with embedded newlines).
+
+e.  There is a new bindable variable, `colored-completion-prefix', which, if
+    set, causes the common prefix of a set of possible completions to be
+    displayed in color.
+
+f.  There is a new bindable command `vi-yank-pop', a vi-mode version of emacs-
+    mode yank-pop.
+
+g.  The redisplay code underwent several efficiency improvements for multibyte
+    locales.
+
+h.  The insert-char function attempts to batch-insert all pending typeahead
+    that maps to self-insert, as long as it is coming from the terminal.
+
+i.  rl_callback_sigcleanup: a new application function that can clean up and
+    unset any state set by readline's callback mode.  Intended to be used
+    after a signal.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-4.3-release, and
+the previous version, bash-4.3-rc2.
+
+1.  Changes to Bash
+
+a.  Only Posix-mode shells should exit on an assignment failure in the
+    temporary environment preceding a special builtin.  This is how it's been
+    documented.
+
+b.  Fixed a bug that caused a failed special builtin to not exit a posix-mode
+    shell if the failing builtin was on the LHS of a && or ||.
+
+c.  Changed the handling of unquoted backslashes in regular expressions to be
+    closer to bash-4.2.
+
+d.  globstar (**) no longer traverses symbolic links that resolve to
+    directories.  This eliminates some duplicate entries.
+
+e.  Fixed a bug that caused a SIGCHLD trap handler to not be able to change the
+    SIGCHLD disposition.
+
+f.  Fixed a bug that caused a crash when -x was enabled and a command
+    contained a printable multibyte (wide) character.
+
+g.  Fixed a bug that caused an interactive shell without line editing enabled
+    to read invalid data after receiving a SIGINT.
+
+h.  Fixed a bug that caused command word completion to fail if the directory in
+    $PATH where the completion would be found contained single or double quotes.
+
+i.  Fixed a bug that caused a shell with -v enabled to print commands in $()
+    multiple times.
+
+2.  Changes to Readline
+
+a.  Fixed a bug that caused `undo' to reference freed memory or null pointers.
+
+3.  New Features in Bash
+
+a.  The [[ -v ]] option now understands array references (foo[1]) and returns
+    success if the referenced element has a value.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-4.3-rc2, and the
+previous version, bash-4.3-rc1.
+
+1.  Changes to Bash
+
+a. Fixed a bug that left variables set by printf -v marked as invisible.
+
+b. Fixed an off-by-one error in a job control warning message.
+
+c. Fixed a bug that caused the shell to crash after declaring a nameref variable
+   without a value.
+
+d. Fixed a bug that caused asynchronous commands to not set $? correctly.
+
+e. Fixed a bug that caused out-of-order execution when executing aliases with
+   embedded newlines containing `.' commands.
+
+f. Fixed a bug that caused error messages generated by expansion errors in
+   `for' commands to have the wrong line number.
+
+g. Fixed a bug that caused the `wait' builtin to not be interruptible in an
+   interactive shell with job control enabled.
+
+h. Fixed a bug that caused SIGINT and SIGQUIT to not be trappable in
+   asynchronous subshell commands.
+
+i. Bash now requires that the value assigned to a nameref variable be a valid
+   shell identifier (variable name or array reference).
+
+j. Converting an existing variable to a nameref variable now turns off the
+   -i/-l/-u/-c attributes.
+
+k. Displaying a nameref variable with `declare -p' now displays the nameref
+   variable and its value rather than following the nameref chain.
+
+l. Fixed a problem with interrupt handling that caused a second and subsequent
+   SIGINT to be ignored by interactive shells.
+
+m. Fixed a bug that caused certain positional parameter and array expansions
+   to mishandle (discard) null positional parameters and array elements.
+
+n. The shell no longer blocks receipt of signals while running trap handlers
+   for those signals, and allows most trap handlers to be run recursively
+   (running trap handlers while a trap handler is executing).
+
+o. The shell now handles backslashes in regular expression arguments to the
+   [[ command's =~ operator slightly differently, resulting in more
+   consistent behavior.
+
+2.  Changes to Readline
+
+a. Fixed a bug that could cause readline to crash and seg fault attempting to
+   expand an empty history entry.
+
+b. Fixed a bug that caused a bad entry in the $LS_COLORS variable to abort all
+   color processing but leave color enabled.
+
+c. Fixed a bug that caused display problems with multi-line prompts containing
+   invisible characters on multiple lines.
+
+d. Fixed a bug that caused effects made by undoing changes to a history line to
+   be discarded.
+
+3.  New Features in Bash
+
+4.  New Features in Readline
+
+a.  When creating shared libraries on Mac OS X, the pathname written into the
+    library (install_name) no longer includes the minor version number.
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-4.3-rc1, and the
+previous version, bash-4.3-beta2.
+
+1.  Changes to Bash
+
+a. Fixed a bug in bash completion that caused a tilde to be expanded even if
+   the `direxpand' option was not enabled.
+
+b. Fixed a potential bug that could cause corrupted input in interactive shells
+   running without line editing and with `ignoreeof' enabled.
+
+c. Fixed a bug that could cause failures when opening pipes back to shells
+   created to run process substitutions.
+
+d. Fixed a bug that caused an assignment to TEXTDOMAIN to require TEXTDOMAINDIR
+   to be set in order to actually change the current text domain.
+
+e. Changed the way redirections are printed to avoid confusion when the target
+   of an output redirection is a process substitution beginning with `>'.
+
+2.  Changes to Readline
+
+a. Shared library building is now supported on Mac OS X 10.9 (Darwin 13).
+
+3.  New Features in Bash
+
+a. `cd' has a new `-@' option to browse a file's extended attributes on
+   systems that support O_XATTR.
+
+4.  New Features in Readline
+
+a. There are additional default key bindings for MinGW32
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-4.3-beta2, and the
+previous version, bash-4.3-beta.
+
+1.  Changes to Bash
+
+a.  Fixed a bug that caused assignment to an unset variable using a negative
+    subscript to result in a segmentation fault.
+
+b.  Fixed a bug that caused assignment to a string variable using a negative
+    subscript to use the incorrect index.
+
+c.  Fixed a bug that caused some strings to be interpreted as invalid
+    extended globbing expressions when used with the help builtin.
+
+d.  Fixed a bug that caused an attempt to trap a signal whose disposition
+    cannot be changed to reference uninitialized memory.
+
+e.  Command completion now skips assignment statements preceding a command
+    name and completes the command.
+
+f.  Fixed a bug that caused `compgen -f' in a non-interactive shell to dump
+    core under certain circumstances.
+
+g.  Fixed a bug that caused the `read -N' to misbehave when the input stream
+    contains 0xff.
+
+2.  Changes to Readline
+
+a.  Changed message when an incremental search fails to include "failed" in
+    the prompt and display the entire search string instead of just the last
+    matching portion.
+
+b.  Fixed a bug that caused an arrow key typed to an incremental search prompt
+    to process the key sequence incorrectly.
+
+c.  Additional key bindings for arrow keys on MinGW.
+
+3.  New Features in Bash
+
+a.  The help builtin now attempts substring matching (as it did through
+    bash-4.2) if exact string matching fails.
+
+b.  The fc builtin now interprets -0 as the current command line.
+
+c.  Completing directory names containing shell variables now adds a trailing
+    slash if the expanded result is a directory.
+
+4.  New Features in Readline
+
+a.  rl_change_environment: new application-settable variable that controls
+    whether or not Readline modifies the environment (currently readline
+    modifies only LINES and COLUMNS).
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-4.3-beta, and the
+previous version, bash-4.3-alpha.
+
+1.  Changes to Bash
+
+a.  Fixed a bug in the prompt directory name "trimming" code that caused
+    memory corruption and garbled the results.
+
+b.  Fixed a bug that caused single quotes that resulted from $'...' quoting
+    in the replacement portion of a double-quoted ${word/pat/rep} expansion
+    to be treated as quote characters.
+
+c.  Fixed a bug that caused assignment statements preceding a command word to
+    result in assignment statements following a declaration command to not be
+    expanded like assignment statements.
+
+d.  Fixed a bug with variable search order in the presence of local variables
+    with the same name as variables in the temporary environment supplied to
+    a shell function.
+
+e.  Fixed a bug that caused constructs like 1<(2) to be interpreted as process
+    substitutions even in an arithmetic context.
+
+f.  Fixed several cases where `invisible' variables (variables with attributes
+    but no values, which are technically unset) were treated incorrectly.
+
+g.  Fixed a bug that caused group commands in pipelines that were not the
+    last element to not run the EXIT trap.
+
+h.  Fixed a bug that caused `unset -n' to not unset a nameref variable in
+    certain cases.
+
+i.  Fixed the nameref circular reference checking to be less strict and only
+    disallow a nameref variable with the same value as its name at the global
+    scope.
+
+j.  Fixed a bug that caused trap handlers to be executed recursively,
+    corrupting internal data structures.
+
+k.  Fixed a bug that could result in bash not compiling if certain options were
+    not enabled.
+
+l.  Fixed a bug that caused the arithmetic expansion code to attempt variable
+    assignments when operator precedence prohibited them.
+
+m.  Word expansions like ${foo##bar} now understand indirect variable references.
+
+n.  Fixed a bug that caused `declare -fp name' to not display a function 
+    definition.
+
+o.  Fixed a bug that caused asynchronous child processes to modify the stdin
+    file pointer when bash was using it to read a script, which modified the
+    parent's value as well.
+
+2.  Changes to Readline
+
+a.  Fixed a bug in vi mode that caused the arrow keys to set the saved last
+    vi-mode command to the wrong value.
+
+b.  Fixed a bug that caused double-quoted strings to be scanned incorrectly
+    when being used as the value of a readline variable assignment.
+
+c.  Fixed a bug with vi mode that prevented `.' from repeating a command
+    entered on a previous line (command).
+
+d.  Fixed a bug that could cause completion to core dump if it was interrupted
+    by a signal.
+
+e.  Readline now sends the meta-key enable string to the terminal if the
+    terminal has been successfully initialized.
+
+f.  Readline now calls the signal hook after resizing the terminal when it
+    receives a SIGWINCH.
+
+g.  Fixed a bug that could cause the history list code to perform an out-of-
+    bounds array reference if the history list is empty.
+
+3.  New Features in Bash
+
+a.  Shells started to run process substitutions now run any trap set on EXIT.
+
+b.  There is now a configure-time option to enable the globasciiranges option
+    by default.
+
+c.  The read builtin now checks its first variable argument for validity before
+    trying to read any input.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-4.3-alpha,
+and the previous version, bash-4.2-release.
+
+1.  Changes to Bash
+
+a.  Fixed several bugs concerning incomplete bracket expressions in filename
+    generation (globbing) patterns.
+
+b.  Fixed a bug with single quotes and WORD in ${param op WORD} when running
+    in Posix mode.
+
+c.  Fixed a bug that caused the pattern removal and pattern substitution word
+    expansions and case statement word expansion to not match the empty string.
+
+d.  Fixed a bug that caused the tzset() function to not work after changing
+    the TZ environment variable.
+
+e.  Fixed a bug that caused the RHS of an assignment statement to undergo
+    word splitting when it contained an unquoted $@.
+
+f.  Fixed bugs that caused the shell to not react to a SIGINT sent while
+    waiting for a child process to exit.
+
+g.  Bash doesn't try to run things in a signal handler context when it gets a
+    signal (SIGINT/SIGHUP/etc) while reading input using readline but still
+    be responsive to terminating signals.
+
+h.  Fixed a bug that caused bash to go into an infinite loop if a filename
+    to be matched contained an invalid multibyte character.
+
+i.  Fixed a bug that caused PS4 to end up being truncated if it is longer
+    than 128 bytes.
+
+j.  Fixed a bug that caused brace expansion to not skip over double-quoted
+    command substitution.
+
+k.  System-specific updates for: DJGPP, HP/UX, Mac OS X
+
+l.  Fixed a bug in displaying commands that caused redirections to be associated
+    with the wrong part of the command.
+
+m.  Fixed the coproc cleanup to unset the appropriate shell variables when a
+    coproc terminates.
+
+n.  Fixed a bug that caused `fc' to dump core due to incorrect calculation of
+    the last history entry.
+
+o.  Added workarounds for FreeBSD's implementation of faccessat/eaccess and
+    `test -x'.
+
+p.  Fixed a bug that caused the shell to not match patterns containing
+    control-A.
+
+q.  Fixed a bug that could result in doubled error messages when the `printf'
+    builtin got a write error.
+
+r.  Fixed a bug that caused the shell to not correctly expand words containing
+    multiple consecutive quoted empty strings (""""""aa).
+
+s.  Fixed a bug that caused the shell to not correctly parse multi-line
+    process substitutions containing comments and quoted strings.
+
+t.  Fixed a problem with the bash malloc's internal idea of the top of the
+    memory heap that resulted in incorrect decisions to try to reduce the
+    break and give memory back to the kernel.
+
+u.  There are changes to the expansions performed on compound array assignments,
+    in an effort to make foo=( [ind1]=bar [ind2]=baz ) identical to
+    foo[ind1]=bar foo[ind2]=baz.
+
+v.  Bash now reports an error if `read -a name' is used when `name' is an
+    existing associative array.
+
+w.  Fixed a bug that allowed an attempted assignment to a readonly variable
+    in an arithmetic expression to not return failure.
+
+x.  Fixed several bugs that caused completion functions to be invoked even when
+    the cursor was before the first word in the command.
+
+y.  Fixed a bug that caused parsing a command substitution to overwrite the
+    parsing state associated with the complete input line.
+
+z.  Fixed several bugs with the built-in snprintf replacement and field widths
+    and floating point.
+
+aa. Fixed a bug that caused incorrect offset calculations and input buffer
+    corruption when reading files longer than 2^31 bytes.
+
+bb. Fixed several bugs where bash performed arithmetic evaluation in contexts
+    where evaluation is suppressed.
+
+cc. Fixed a bug that caused bash to close FIFOs used for process substitution
+    too early when a shell function was executing, but protect against using
+    all file descriptors when the shell functions are invoked inside loops.
+
+dd. Added checks for printable (and non-printable) multibyte characters for
+    use in error messages.
+
+ee. Fixed a bug that caused ^O (operate-and-get-next) to not work correctly
+    at the end of the history list.
+
+ff. Fixed a bug that caused command-oriented history to incorrectly combine
+    here documents into one line.
+
+gg. Fixed a bug that caused importing SHELLOPTS from the environment into a
+    Posix-mode shell to print an error message and refuse to parse it.
+
+hh. Fixed a bug that caused the shell to delete an extra history entry when
+    using `history -s'.
+
+ii. Fixed a bug that caused floating-point exceptions and overflow errors
+    for the / and % arithmetic operators when using INTMAX_MIN and -1.
+
+jj. Fixed a bug that caused parsing errors when reading an arithmetic for
+    loop inside a command substitution.
+
+kk. Fixed a bug that caused a readonly function to be unset when unset was
+    called without the -f or -v option.
+
+ll. Fixed several bugs in the code that quotes characters special to regular
+    expressions when used in a quoted string on the RHS of the =~ operator
+    to the [[ command.
+
+mm. Fixed a bug that caused redirections to fail because the file descriptor
+    limit was set to a value less than 10.
+
+nn. Fixed a bug that caused the `read' builtin to execute code in a signal
+    handler context if read timed out.
+
+oo. Fixed a bug that caused extended globbing patterns to not match files
+    beginning with `.' correctly when a `.' was explicitly supplied in the
+    pattern.
+
+pp. Fixed a bug that caused key sequences longer than two characters to not
+    work when used with `bind -x'.
+
+qq. Fixed a bug that resulted in redefined functions having the wrong source
+    file names in BASH_SOURCE.
+
+rr. Fixed a bug that caused the read builtin to assign null strings to variables
+    when using `read -N', which caused core dumps when referenced
+
+ss. Fixed a bug that caused `bash -m script' to not enable job control while
+    running the script.
+
+tt. Fixed a bug that caused `printf -v var' to dump core when used with the
+    %b format code.
+
+uu. Fixed a bug that caused the shell to exit with the wrong status if -e was
+    active and the shell exited on a substitution error.
+
+vv. Fixed a bug that caused the shell to seg fault if an array variable with
+    the same name as an existing associative array was implicitly created by
+    an assignment (declare a[n]=b).
+
+ww. Fixed a bug that caused a redirection to misbehave if the number specified
+    for a file descriptor overflows an intmax_t.
+
+xx. Fixed several bugs with the handling of valid and invalid unicode character
+    values when used with the \u and \U escape sequences to printf and $'...'.
+
+yy. Fixed a bug that caused tildes to not be escaped in expanded filenames,
+    making them subject to later expansion.
+
+zz. When using the pattern substitution word expansion, bash now runs the
+    replacement string through quote removal, since it allows quotes in that
+    string to act as escape characters.  This is not backwards compatible, so
+    it can be disabled by setting the bash compatibility mode to 4.2.
+
+aaa. Fixed the rest of the cases where the shell runs non-allowed code in a
+     signal handler context.
+
+bbb. Fixed a bug that caused spurious DEL characters (\177) to appear in
+     double-quoted expansion where the RHS is evaluated to the empty string.
+
+ccc. Fixed a bug that caused the use of the shell's internal random number
+     generator for temporary file names to perturb the random number
+     sequence.
+
+ddd. Fixed several bugs that caused `declare -g' to not set the right global
+     variables or to misbehave when declaring global indexed arrays.
+
+eee. Fixed a logic bug that caused extended globbing in a multibyte locale to
+     cause failures when using the pattern substititution word expansions.
+
+fff. Fixed a bug that caused the `lastpipe' option to corrupt the file
+     descriptor used to read the script.
+
+ggg. Fixed a bug that causes the shell to delete DEL characters in the
+     expanded value of variables used in the same quoted string as variables
+     that expand to nothing.
+
+hhh. Fixed a bug that caused the shell to assign the wrong value from an
+     assignment like (( x=7 )) when `x' was an existing array variable.
+
+iii. Fixed a bug that caused the shell to misbehave when generating sequences
+     and the boundary values overflow an intmax_t.
+
+jjj. Fixed a bug caused expansion errors if an expansion of "$@" appeared
+     next to another expansion (e.g.. "${@}${x}").
+
+kkk. Fixed a potential buffer overflow bug when performing /dev/fd expansion.
+
+lll. Fixed a bug that resulted in an extra semicolon being added to compound
+     assignments when they were added to the history list.
+
+mmm. Fixed a bug that caused mapfile to read one extra line from the input.
+
+nnn. Fixed a bug that caused the mail checking code to use uninitialized
+     values.
+
+ooo. Fixed a bug that prevented history timestamps from being saved if the
+     history comment character is unset.
+
+ppp. Fixed a bug that caused the case-modifying expansions to not work with
+     multibyte characters.
+
+qqq. Fixed a bug that caused the edit-and-execute bindable readline command
+     to see the wrong data if invoked in the middle of a multi-line quoted
+     string.
+
+rrr. Fixed a bug that resulted in the shell returning the wrong exit status
+     for a background command on systems that recycle PIDs very quickly.
+
+sss. Fixed a bug that caused asynchronous group commands to not run any EXIT
+     trap defined in the body of the command.
+
+ttt. Fixed a bug that caused `eval "... ; return"' to not clean up properly.
+
+uuu. Fixed a bug that caused the shell to dump core if `read' reads an escaped
+     IFS whitespace character.
+
+vvv. Fixed a bug that caused BASH_COMMAND to be set to an incorrect value when
+     executing a (...) subshell.
+
+www. Fixed a couple of pointer aliasing bugs with the token string in arithmetic
+     evaluation.
+
+xxx. Fixed a bug with parsing multi-line command substitutions when reading
+     the `do' keyword followed by whitespace.
+
+yyy. Fixed a bug that caused the shell to seg fault if the time given to the
+     printf %(...)T format overflowed the value accepted by localtime(3).
+
+zzz. Fixed a problem with displaying help topics in two columns when the
+     translated text contained multibyte characters.
+
+aaaa. Fixed a bug with the extended globbing pattern matcher where a `*' was
+      followed by a negated extended glob pattern.
+
+bbbb. Fixed a race condition with short-lived coproc creation and reaping that
+      caused the child process to be reaped before the various coproc shell
+      variables were initialized.
+
+cccc. Fixed a bug where turning off `errexit' in command substitution subshells
+      was not reflected in $SHELLOPTS.
+
+dddd. Partially fixed an inconsistency in how the shell treated shell
+      functions run from an EXIT trap.
+
+eeee. Fixed a bug in how the shell invalidated FIFOs used for process
+      substitution when executing a pipeline (once rather than in every child).
+
+ffff. Fixed a bug that occurred when expanding a special variable ($@, $*)
+      within double quotes and the expansion resulted in an empty string.
+
+gggg. Fixed bugs with executing a SIGCHLD trap handler to make sure that it's
+      executed once per exited child.
+
+hhhh. Fixed a bug that caused `declare' and `test' to find variables that
+      had been given attributes but not assigned values.  Such variables are
+      not set.
+
+iiii. Fixed a bug that caused commands in process substitutions to not look in
+      the local temporary environment when performing word expansions.
+
+jjjj. Fixed several problems with globstar expansions (**/**) returning null
+      filenames and multiple instances of the same pathname.
+
+kkkk. Fixed an oversight that did not allow the exit status of `coproc' to
+      be inverted using `!'.
+
+llll. Fixed a bug that caused the -e option to be re-enabled using `set -e'
+      even when executing in a context where -e is ignored.
+
+mmmm. Fixed a (mostly theoretical) bug with input lines longer than SIZE_MAX.
+
+nnnn. Fixed a bug that could result in double evaluation of command
+      substitutions when they appear in failed redirections.
+
+oooo. Fixed a bug that could cause seg faults during `mapfile' callbacks if
+      the callback unsets the array variable mapfile is using.
+
+pppp. Fixed several problems with variable assignments using ${var:=value}
+      when the variable assignment is supposed to have side effects.
+
+qqqq. Fixed a bug that caused a failure of an assignment statement preceding a
+      builtin caused the next invocation of a special builtin to exit the shell.
+
+rrrr. Fixed several problems with IFS when it appears in the temporary environment
+      and is used in redirections.
+
+ssss. Fixed a problem that caused IFS changes using ${IFS:=value} to modify
+      how preceding expansions were split.
+
+tttt. Fixed a problem that caused subshells to not run an EXIT trap they set.
+
+uuuu. Fixed a problem that caused shells started in posix mode to attempt to
+      import shell functions with invalid names from the environment.  We now
+      print a warning.
+
+vvvv. Worked around a kernel problem that caused SIGCHLD to interrupt open(2)
+      on a FIFO used for process substitution, even if the SIGCHLD handler was
+      installed with the SA_RESTART flag.
+
+wwww. Fixed a problem that resulted in inconsistent expansion of $* and ${a[*]}.
+
+xxxx. Fixed a problem that caused `read -t' to crash when interrupted by
+      SIGINT.
+
+yyyy. Fixed a problem that caused pattern removal to fail randomly because the
+      pattern matcher read beyond the end of a string.
+
+zzzz. Fixed a bug that caused core dumps when shell functions tried to create
+      local shadow copies of special variables like GROUPS.
+
+aaaaa. Fixed a bug that caused SIGTERM to be occasionally lost by children of
+       interactive shells when it arrived before the child process reset the
+       handler from SIG_DFL.
+
+bbbbb. Fixed a bug that caused redirections like <&n- to leave file descriptor
+       n closed if executed with a builtin command.
+
+ccccc. Fixed a bug that caused incorrect completion quoting when completing a
+       word containing a globbing character with `show-all-if-ambiguous' set.
+
+ddddd. Fixed a bug that caused printf's %q format specifier not to quote a
+       tilde even if it appeared in a location where it would be subject to
+       tilde expansion.
+
+2.  Changes to Readline
+
+a.  Fixed a bug that did not allow the `dd', `cc', or `yy' vi editing mode
+    commands to work on the entire line.
+
+b.  Fixed a bug that caused redisplay problems with prompts longer than 128
+    characters and history searches.
+
+c.  Fixed a bug that caused readline to try and run code to modify its idea
+    of the screen size in a signal handler context upon receiving a SIGWINCH.
+
+d.  Fixed a bug that caused the `meta' key to be enabled beyond the duration
+    of an individual call top readline().
+    
+e.  Added a workaround for a wcwidth bug in Mac OS X that caused readline's
+    redisplay to mishandle zero-width combining characters.
+
+f.  Fixed a bug that caused readline to `forget' part of a key sequence when
+    a multiple-key sequence caused it to break out of an incremental search.
+
+g.  Fixed bugs that caused readline to execute code in a signal handler
+    context if interrupted while reading from the file system during completion.
+
+h.  Fixed a bug that caused readline to `forget' part of a key sequence when
+    reading an unbound multi-character key sequence.
+
+i.  Fixed a bug that caused Readline's signal handlers to be installed beyond
+    the bounds of a single call to readline().
+
+j.  Fixed a bug that caused the `.' command to not redo the most recent `R'
+    command in vi mode.
+
+k.  Fixed a bug that caused ignoring case in completion matches to result in
+    readline using the wrong match.
+
+l.  Paren matching now works in vi insert mode.
+
+m.  Fix menu-completion to make show-all-if-ambiguous and menu-complete-display-prefix
+    work together.
+
+n.  Fixed a bug that didn't allow the `cc', `dd', or `yy' commands to be redone
+    in vi editing mode.
+
+o.  Fixed a bug that caused the filename comparison code to not compare
+    multibyte characters correctly when using case-sensitive or case-mapping
+    comparisons.
+
+p.  Fixed the input reading loop to call the input hook function only when there
+    is no terminal input available.
+
+q.  Fixed a bug that caused binding a macro to a multi-character key sequence
+    where the sequence and macro value share a common prefix to not perform
+    the macro replacement.
+
+r.  Fixed several redisplay errors with multibyte characters and prompts
+    containing invisible characters when using horizontal scrolling.
+
+s.  Fixed a bug that caused redisplay errors when trying to overwrite
+    existing characters using multibyte characters.
+
+3.  New Features in Bash
+
+a.  The `helptopic' completion action now maps to all the help topics, not just
+    the shell builtins.
+
+b.  The `help' builtin no longer does prefix substring matching, so `help read'
+    does not match `readonly'.
+
+c.  The shell can be compiled to not display a message about processes that
+    terminate due to SIGTERM.
+
+d.  Non-interactive shells now react to the setting of checkwinsize and set
+    LINES and COLUMNS after a foreground job exits.
+
+e.  There is a new shell option, `globasciiranges', which, when set to on,
+    forces globbing range comparisons to use character ordering as if they
+    were run in the C locale.
+
+f.  There is a new shell option, `direxpand', which makes filename completion
+    expand variables in directory names in the way bash-4.1 did.
+
+g.  In Posix mode, the `command' builtin does not change whether or not a
+    builtin it shadows is treated as an assignment builtin.
+
+h.  The `return' and `exit' builtins accept negative exit status arguments.
+
+i.  The word completion code checks whether or not a filename containing a
+    shell variable expands to a directory name and appends `/' to the word
+    as appropriate.  The same code expands shell variables in command names
+    when performing command completion.
+
+j.  In Posix mode, it is now an error to attempt to define a shell function
+    with the same name as a Posix special builtin.
+
+k.  When compiled for strict Posix conformance, history expansion is disabled
+    by default.
+
+l.  The history expansion character (!) does not cause history expansion when
+    followed by the closing quote in a double-quoted string.
+
+m.  `complete' and its siblings compgen/compopt now takes a new `-o noquote'
+    option to inhibit quoting of the completions.
+
+n.  Setting HISTSIZE to a value less than zero causes the history list to be
+    unlimited (setting it 0 zero disables the history list).
+
+o.  Setting HISTFILESIZE to a value less than zero causes the history file size
+    to be unlimited (setting it to 0 causes the history file to be truncated
+    to zero size).
+
+p.  The `read' builtin now skips NUL bytes in the input.
+
+q.  There is a new `bind -X' option to print all key sequences bound to Unix
+    commands.
+
+r.  When in Posix mode, `read' is interruptible by a trapped signal.  After
+    running the trap handler, read returns 128+signal and throws away any
+    partially-read input.
+
+s.  The command completion code skips whitespace and assignment statements
+    before looking for the command name word to be completed.
+
+t.  The build process has a new mechanism for constructing separate help files
+    that better reflects the current set of compilation options.
+
+u.  The -nt and -ot options to test now work with files with nanosecond
+    timestamp resolution.
+
+v.  The shell saves the command history in any shell for which history is
+    enabled and HISTFILE is set, not just interactive shells.
+
+w.  The shell has `nameref' variables and new -n(/+n) options to declare and
+    unset to use them, and a `test -R' option to test for them.
+
+x.  The shell now allows assigning, referencing, and unsetting elements of
+    indexed arrays using negative subscripts (a[-1]=2, echo ${a[-1]}) which
+    count back from the last element of the array.
+
+y.  The {x}<word redirection feature now allows words like {array[ind]} and
+    can use variables with special meanings to the shell (e.g., BASH_XTRACEFD).
+
+z.  There is a new CHILD_MAX special shell variable; its value controls the
+    number of exited child statuses the shell remembers.
+
+aa. There is a new configuration option (--enable-direxpand-default) that
+    causes the `direxpand' shell option to be enabled by default.
+
+bb. Bash does not do anything special to ensure that the file descriptor
+    assigned to X in {x}<foo remains open after the block containing it
+    completes.
+
+cc. The `wait' builtin has a new `-n' option to wait for the next child to
+    change status.
+
+dd. The `printf' %(...)T format specifier now uses the current time if no
+    argument is supplied.
+
+ee. There is a new variable, BASH_COMPAT, that controls the current shell
+    compatibility level.
+
+ff. The `popd' builtin now treats additional arguments as errors.
+
+gg. The brace expansion code now treats a failed sequence expansion as a
+    simple string and will continue to expand brace terms in the remainder
+    of the word.
+
+4.  New Features in Readline
+
+a.  Readline is now more responsive to SIGHUP and other fatal signals when
+    reading input from the terminal or performing word completion but no
+    longer attempts to run any not-allowable functions from a signal handler
+    context.
+
+b.  There are new bindable commands to search the history for the string of
+    characters between the beginning of the line and the point
+    (history-substring-search-forward, history-substring-search-backward)
+
+c.  Readline allows quoted strings as the values of variables when setting
+    them with `set'.  As a side effect, trailing spaces and tabs are ignored
+    when setting a string variable's value.
+
+d.  The history library creates a backup of the history file when writing it
+    and restores the backup on a write error.
+
+e.  New application-settable variable: rl_filename_stat_hook: a function called
+    with a filename before using it in a call to stat(2).  Bash uses it to
+    expand shell variables so things like $HOME/Downloads have a slash
+    appended.
+
+f.  New bindable function `print-last-kbd-macro', prints the most-recently-
+    defined keyboard macro in a reusable format.
+
+g.  New user-settable variable `colored-stats', enables use of colored text
+    to denote file types when displaying possible completions (colored analog
+    of visible-stats).
+
+h.  New user-settable variable `keyseq-timout', acts as an inter-character
+    timeout when reading input or incremental search strings.
+
+i.  New application-callable function: rl_clear_history. Clears the history list
+    and frees all readline-associated private data.
+
+j.  New user-settable variable, show-mode-in-prompt, adds a characters to the
+    beginning of the prompt indicating the current editing mode.
+
+k.  New application-settable variable: rl_input_available_hook; function to be
+    called when readline needs to check whether there is data available on its
+    input source.  The default hook checks rl_instream.
+
+l.  Readline calls an application-set event hook (rl_signal_event_hook) after
+    it gets a signal while reading input (read returns -1/EINTR but readline
+    does not handle the signal immediately) to allow the application to handle
+    or otherwise note it.  Not currently called for SIGHUP or SIGTERM.
+
+m.  If the user-settable variable `history-size' is set to a value less than
+    0, the history list size is unlimited.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-4.2-release,
+and the previous version, bash-4.2-rc2.
+
+1.  Changes to Bash
+
+a.  Fixed a bug that caused some variables to be clobbered by a longjmp,
+    resulting in stack corruption.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-4.2-rc2,
+and the previous version, bash-4.2-rc1.
+
+1.  Changes to Bash
+
+a.  Changes to bash_directory_completion_hook so that it's assigned to the
+    readline rl_directory_rewrite_hook variable, which modifies the directory
+    name passed to opendir without modifying the directory name the user
+    typed.
+
+b.  Fixed bug in select builtin that caused it to not terminate correctly if
+    the read timed out due to $TMOUT.
+
+c.  Fixed a problem that resulted in non-repeatable sequences of random
+    numbers when RANDOM=0.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-4.2-rc1,
+and the previous version, bash-4.2-beta.
+
+1.  Changes to Bash
+
+a.  Fixed a bug that caused some redirection errors to leak file descriptors.
+
+b.  Fixed a bug that caused unary `+' and `-' arithmetic operators to have a
+    higher precedence than unary `!' and `~'.
+
+c.  Fixed a bug that caused simple commands in a pipeline to affect the exit
+    status ($?) seen by subsequent pipeline commands.
+
+d.  A number of cygwin-specific changes to avoid the use of text-mode files
+    and file access, and to make sure that \r is handled correctly.
+
+e.  Fixed a bug that caused the read builtin to not return failure if an
+    attempt is made to assign to a readonly variable.
+
+f.  Fixed a bug that caused some builtin usage messages to not be translated.
+
+g.  Fixed a bug that caused the getopts builtin to not return failure if an
+    attempt is made to assign to a readonly variable.  Now it returns 2.
+
+h.  Fixed the cd and pwd builtins to return failure if PWD is readonly and
+    cannot be assigned to.
+
+i.  Added code to check the return value of access(2) on Solaris systems,
+    since it returns success for executable tests (e.g., `test -x') when
+    run by root, even if the file permissions don't allow execution.
+
+2.  Changes to Readline
+
+a.  Fixed a bug that caused directory names in words to be completed to not
+    be dequoted correctly.
+
+3.  New Features in Bash
+
+4.  New Features in Readline
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-4.2-beta,
+and the previous version, bash-4.2-alpha.
+
+1.  Changes to Bash
+
+a.  Fixed a bug that caused the \W prompt string escape to not add a closing
+    NULL.
+
+b.  Fixed a bug that caused partially-quoted words that were not subject to
+    word splitting to retained quoted NULLs.
+
+c.  Added considerable efficiency speedups when pattern matching in multibyte
+    locales by skipping multibyte character functions where possible.
+
+d.  Added considerable speedups to variable expansion when in multibyte locales.
+
+e.  Fixed a bug that caused the expansion of $* when there are no positional
+    parameters to cause the shell to dump core when used in a pattern
+    matching context.
+
+f.  Fixed a bug that caused variable expansions preceding regular builtins to
+    not change the shell environment during their execution.
+
+2.  Changes to Readline
+
+a.  Fixed a bug that made an explicit argument of 0 to yank-last-arg behave
+    as if it were a negative argument.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-4.2-alpha,
+and the previous version, bash-4.1-release.
+
+1.  Changes to Bash
+
+a.  Fixed a bug in the parser when processing alias expansions containing
+    quoted newlines.
+
+b.  Fixed a memory leak in associative array expansion.
+
+c.  Fixed a bug that caused quoted here-strings to be requoted when printed.
+
+d.  Fixed a bug in arithmetic expansion that caused the index in an array
+    expansion to be evaluated twice under certain circumstances.
+
+e.  Fixed several bugs with the expansion and display of variables that have
+    been given attributes but not values and are technically unset.
+
+f.  Fixed a bug that caused core dumps when using filename completion that
+    expands to a filename containing a globbing character.
+
+g.  Fixed a bug that caused assignment statements preceding a special builtin
+    when running in Posix mode to not persist after the builtin completed
+    when the special builtin was executed in a shell function without any
+    local variables.
+
+h.  Fixed a bug that caused a command to remain in the hash table even after
+    `hash command' did not find anything if there was already an existing
+    hashed pathname.
+
+i.  Fixed several bugs caused by executing unsafe functions from a signal
+    handler in the cases where a signal handler is executed immediately
+    rather than setting a flag for later execution.
+
+j.  Fixed a bug that caused some internal flag variables to be set
+    incorrectly if `read -t' timed out.
+
+k.  Fixed a Posix compatibility issue by making sure that a backslash escaping
+    a `}' within a double-quoted ${...} parameter expansion is removed as part
+    of the parameter expansion.
+
+l.  Fixed a bug that caused execution of a trap to overwrite PIPESTATUS.
+
+m.  Fixed a bug that caused here documents to not be displayed correctly
+    when attached to commands inside compound commands.
+
+n.  Fixed a bug that caused the printf builtin to use the wrong precision
+    when using the `*' modifier.
+
+o.  Fixed a bug that caused an arriving SIGCHLD to interrupt output functions
+    like those invoked by echo or printf.
+
+p.  Changed to use a more robust mechanism than eaccess(2) when test is
+    checking filenames for execution permission.
+
+q.  Fixed a bug that caused spurious semicolons to be added into the command
+    history in certain cases.
+
+r.  Fixed a bug that caused the shell to free non-allocated memory when
+    unsetting element 0 of an associative array after it was assigned
+    implicitly.
+
+s.  Fixed a bug that could cause the shell to dump core if using the `v'
+    vi editing command on a multi-line command.
+
+t.  Fixed a bug that left FIFOs opened by process substitutions open long
+    enough to potentially cause file descriptor exhaustion when running a
+    shell function or shell builtin.
+
+u.  Fixed a bug that caused the history expansion functions to not recognize
+    process substitution or extended glob patterns as single words.
+
+v.  Fixed a bug that caused restricted shells to set a restricted command's
+    exit status incorrectly.
+
+w.  Fixed a bug that caused bash to ignore the wrong set of filenames when
+    completing a command using the `complete-filename' readline command.
+
+x.  Fixed a bug that caused a -PID argument following a -s sig or -n sig to
+    not be interpreted as a signal specification.
+
+y.  Changed posix-mode behavior of a parse error in a `.' script or `eval'
+    command to exit the shell under Posix-specified conditions.  Previous
+    versions printed a warning.
+
+z.  Fixed a bug in \W prompt expansion that resulted in incorrect expansion
+    in the event of overlapping strings.
+
+aa. Fixed a bug that caused the := parameter expansion operator to return the
+    wrong value as the result of the expansion.
+
+bb. When in Posix mode, a single quote is not treated specially in a
+    double-quoted ${...} expansion, unless the expansion operator is
+    # or % or the non-Posix `//', `^', and `,'.  In particular, it does
+    not define a new quoting context.  This is from Posix interpretation 221.
+
+cc. Fixed a bug that inadvertently allowed program names containing slashes
+    to be entered into the command hash table.
+
+dd. Fixed a bug that caused the select builtin to incorrectly compute the
+    display width of the arguments in the presence of multibyte characters.
+
+ee. Fixed a bug that caused bash to not change the xtrace file descriptor if
+    BASH_XTRACEFD was found in the shell environment at startup.
+
+ff. Fixed a memory leak in the pattern removal parameter expansion.
+
+gg. Fixed a bug that caused SIGINT to fail to interrupt a nested loop if the
+    loop was in a pipeline.
+
+hh. Fixed a problem in $(...) parsing that caused the parser to add an extra
+    space to a here-document delimiter if the first word contained a `/'.
+
+ii. Fixed a bug that caused functions defined with the `function' reserved
+    word to require braces around the function body.
+
+jj. Fixed a bug that caused bash to dump core when a variable expansion being
+    used as an array subscript failed.
+
+kk. Fixed a bug that caused bash to dump core if the case-modification
+    expansions were used on a variable with a null value.
+
+ll. Fixed a bug that caused partially-quoted strings to be split incorrectly
+    if a variable with a null value was expanded within double quotes.
+
+mm. The pattern substitution word expansion has been sped up dramatically
+    when running in a locale with multibyte characters.
+
+nn. Fixed a bug that caused history -a to not write the correct lines to
+    the history file if all the new lines in the history list were added
+    since the last time the history file was read or written.
+
+oo. Fixed a bug that caused completion of a word with an unclosed `` command
+    substitution to set the prompt incorrectly.
+
+pp. Fixed a bug that caused extended globbing patterns in $HISTIGNORE or
+    $GLOBIGNORE to be incorrectly scanned.
+
+qq. Fixed a bug caused by closing file descriptors 3-20 on shell startup.  The
+    shell now sets them to close-on-exec.
+
+rr. Fixed a bug that caused the exit status of `exec file' to be set incorrectly
+    if `file' was a directory.
+
+ss. Fixed a bug in the `.' builtin to make a non-interactive posix-mode shell
+    exit if the file argument to `.' is not found.  Prefixing exec with 
+    `command' makes the shell not exit. Posix requires this behavior.
+
+tt. Fixed a bug that caused `sh -c 'command exec; exit 1' to hang.
+
+uu. Fixed a bug in $(...) command substitution parsing that caused the shell
+    to treat backslash-newline incorrectly when parsing a comment.
+
+vv. Fixed bug that caused brace expansion sequence generation to misbehave
+    when supplied integers greater than 2**31 - 1.
+
+ww. Fixed a bug that caused failure to save file descriptors for redirections
+    to corrupt shell file descriptors.
+
+xx. Fixed a bug that caused bash-forward-shellword to not correctly handle
+    quoted strings.
+
+2.  Changes to Readline
+
+a.  Fixed a bug that caused the unconverted filename to be added to the list of
+    completions when the application specified filename conversion functions.
+
+b.  Fixed a bug that caused the wrong filename to be passed to opendir when the
+    application has specified a filename dequoting function.
+
+c.  Fixed a bug when repeating a character search in vi mode in the case where
+    there was no search to repeat.
+
+d.  When show-all-if-ambiguous is set, the completion routines no longer insert
+    a common match prefix that is shorter than the text being completed.
+
+e.  The full set of vi editing commands may now be used in callback mode.
+
+f.  Fixed a bug that caused readline to not update its idea of the terminal
+    dimensions while running in `no-echo' mode.
+
+h.  Fixed a bug that caused readline to dump core if an application called
+    rl_prep_terminal without setting rl_instream.
+
+i.  Fixed a bug that caused meta-prefixed characters bound to incremental
+    search forward or backward to not be recognized if they were typed
+    subsequently.
+
+j.  The incremental search code treats key sequences that map to the same
+    functions as (default) ^G, ^W, and ^Y as equivalent to those characters.
+
+k.  Fixed a bug in menu-complete that caused it to misbehave with large
+    negative argument.
+
+l.  Fixed a bug that caused vi-mode yank-last-arg to ring the bell when invoked
+    at the end of the line.
+
+3.  New Features in Bash
+
+a.  `exec -a foo' now sets $0 to `foo' in an executable shell script without a
+    leading #!.
+
+b.  Subshells begun to execute command substitutions or run shell functions or
+    builtins in subshells do not reset trap strings until a new trap is
+    specified.  This allows $(trap) to display the caller's traps and the
+    trap strings to persist until a new trap is set.
+
+c.  `trap -p' will now show signals ignored at shell startup, though their
+    disposition still cannot be modified.
+
+d.  $'...', echo, and printf understand \uXXXX and \UXXXXXXXX escape sequences.
+
+e.  declare/typeset has a new `-g' option, which creates variables in the
+    global scope even when run in a shell function.
+
+f.  test/[/[[ have a new -v variable unary operator, which returns success if
+    `variable' has been set.
+
+g.  Posix parsing changes to allow `! time command' and multiple consecutive
+    instances of `!' (which toggle) and `time' (which have no cumulative
+    effect).
+
+h.  Posix change to allow `time' as a command by itself to print the elapsed
+    user, system, and real times for the shell and its children.
+
+j.  $((...)) is always parsed as an arithmetic expansion first, instead of as
+    a potential nested command substitution, as Posix requires.
+
+k.  A new FUNCNEST variable to allow the user to control the maximum shell
+    function nesting (recursive execution) level.
+
+l.  The mapfile builtin now supplies a third argument to the callback command:
+    the line about to be assigned to the supplied array index.
+
+m.  The printf builtin has a new %(fmt)T specifier, which allows time values
+    to use strftime-like formatting.
+
+n.  There is a new `compat41' shell option.
+
+o.  The cd builtin has a new Posix-mandated `-e' option.
+
+p.  Negative subscripts to indexed arrays, previously errors, now are treated
+    as offsets from the maximum assigned index + 1.
+
+q.  Negative length specifications in the ${var:offset:length} expansion,
+    previously errors, are now treated as offsets from the end of the variable.
+
+r.  Parsing change to allow `time -p --'.
+
+s.  Posix-mode parsing change to not recognize `time' as a keyword if the
+    following token begins with a `-'.  This means no more Posix-mode
+    `time -p'.  Posix interpretation 267.
+
+t.  There is a new `lastpipe' shell option that runs the last command of a
+    pipeline in the current shell context.  The lastpipe option has no
+    effect if job control is enabled.
+
+u.  History expansion no longer expands the `$!' variable expansion.
+
+v.  Posix mode shells no longer exit if a variable assignment error occurs
+    with an assignment preceding a command that is not a special builtin.
+
+w.  Non-interactive mode shells exit if -u is enabled and an attempt is made
+    to use an unset variable with the % or # expansions, the `//', `^', or
+    `,' expansions, or the parameter length expansion.
+
+x.  Posix-mode shells use the argument passed to `.' as-is if a $PATH search
+    fails, effectively searching the current directory.  Posix-2008 change.
+
+4.  New Features in Readline
+
+a.  The history library does not try to write the history filename in the
+    current directory if $HOME is unset.  This closes a potential security
+    problem if the application does not specify a history filename.
+
+b.  New bindable variable `completion-display-width' to set the number of
+    columns used when displaying completions.
+
+c.  New bindable variable `completion-case-map' to cause case-insensitive
+    completion to treat `-' and `_' as identical.
+
+d.  There are new bindable vi-mode command names to avoid readline's case-
+    insensitive matching not allowing them to be bound separately.
+
+e.  New bindable variable `menu-complete-display-prefix' causes the menu
+    completion code to display the common prefix of the possible completions
+    before cycling through the list, instead of after.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-4.1-rc,
+and the previous version, bash-4.1-beta.
+
+1.  Changes to Bash
+
+a.  Fixed a bug that caused printf to not return a partial value when it
+    encountered an error while converting an integer argument.
+
+b.  Fixed a bug that caused setting one of the compatNN options to not
+    turn off the others.
+
+c.  The (undocumented) --wordexp option is no longer included by default.
+
+d.  Fixed a bug in conditional command execution that caused it to not
+    correctly ignore the exit status under certain circumstances.
+
+e.  Added a configure-time check for correctly-working asprintf/snprintf.
+
+f.  Fixed some problems with line number calculation and display when sourcing
+    a file in an interactive shell.
+
+g.  Fixed a bug that caused the shell to crash when using `declare -A foo=bar'.
+
+h.  Fixed a bug that caused an off-by-one error when calculating the directories
+    to display with the PROMPT_DIRTRIM option.
+
+2.  Changes to Readline
+
+a.  Fixed a bug that caused applications using the callback interface to not
+    react to SIGINT (or other signals) until another character arrived.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-4.1-beta,
+and the previous version, bash-4.1-alpha.
+
+1.  Changes to Bash
+
+a.  Fixed a bug in mapfile that caused the shell to crash if it was passed the
+    name of an associative array.
+
+b.  Fixed a bug that caused the shell to incorrectly split case patterns if
+    they contained characters in $IFS.
+
+c.  Fixed a bug that caused the shell to set $? to the wrong value when using
+    a construct ending with a variable assignment with set -x enabled and PS4
+    containing a command substitution.
+
+d.  Fixed a bug that caused the shell to read commands incorrectly if an
+    expansion error occurred under certain conditions in a user-specified
+    subshell.
+
+e.  Fixed a bug that caused the shell to set $? incorrectly if a parse error
+    occurred in an evaluation context ("eval", trap command, dot script, etc.)
+
+f.  Fixed a bug that caused the shell to attempt command substitution
+    completion within a single-quoted string.
+
+g.  Fixed a bug that caused the shell to insert an extra single quote during
+    word completion.
+
+h.  Fixed a bug that caused the shell to crash if invoked with the environment
+    variable EMACS having a null value.
+
+i.  Fixed a bug that caused bash to incorrectly report the presence of new
+    mail in a `maildir' environment.
+
+j.  Fixed a bug that caused the shell to not recognize a here-document ending
+    delimiter inside a command substitution.
+
+k.  Fixed a bug that caused the shell to crash when a a dynamic array variable
+    was assigned a scalar value.
+
+2.  Changes to Readline
+
+3.  New Features in Bash
+
+a.  The mapfile/readarray builtin no longer stores the commands it invokes via
+    callbacks in the history list.
+
+b.  There is a new `compat40' shopt option.
+
+c.  The < and > operators to [[ do string comparisons using the current locale
+    only if the compatibility level is greater than 40 (set to 41 by default).
+
+4.  New Features in Readline
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-4.1-alpha,
+and the previous version, bash-4.0-release.
+
+1.  Changes to Bash
+
+a.  Fixed bugs in the parser involving new parsing of the commands contained
+    in command substitution when the substitution is read.
+
+b.  Fixed a bug that caused the shell to dump core when performing programmable
+    completion using a shell function.
+
+c.  Fixed a bug in `mapfile' that caused it to invoke callbacks at the wrong
+    time.
+
+d.  Fixed a bug that caused the shell to dump core when listing jobs in the
+    `exit' builtin.
+
+e.  Fixed several bugs encountered when reading subscripts in associative
+    array assignments and expansions.
+
+f.  Fixed a bug that under some circumstances caused an associative array to
+    be converted to an indexed array.
+
+g.  Fixed a bug that caused syntax errors and SIGINT interrupts to not set
+    $? to a value > 128.
+
+h.  Fixed a bug that caused the shell to remove FIFOs associated with process
+    substitution inside shell functions.
+
+i.  Fixed a bug that caused terminal attributes to not be reset when the
+    `read' builtin timed out.
+
+j.  Fixed a bug in brace expansion that caused unwanted zero padding of the
+    expanded terms.
+
+k.  Fixed a bug that prevented the |& construct from working as intended when
+    used with a simple command with additional redirections.
+
+l.  Fixed a bug with the case statement ;& terminator that caused the shell to
+    dereference a NULL pointer.
+
+m.  Fixed a bug that caused assignment statements or redirections preceding
+    a simple command name to inhibit alias expansion.
+
+n.  Fixed the behavior of `set -u' to conform to the latest Posix interpretation:
+    every expansion of an unset variable except $@ and $* will cause the
+    shell to exit.
+
+o.  Fixed a bug that caused double-quoted expansions of $* inside word
+    expansions like ${x#$*} to not expand properly when $IFS is empty.
+
+p.  Fixed a bug that caused traps to set $LINENO to the wrong value when they
+    execute.
+
+q.  Fixed a bug that caused off-by-one errors when computing history lines in
+    the `fc' builtin.
+
+r.  Fixed a bug that caused some terminating signals to not exit the shell
+    quickly enough, forcing the kernel to send the signal (e.g., SIGSEGV)
+    multiple times.
+
+s.  Fixed a bug that caused the shell to attempt to add empty lines to the
+    history list when reading here documents.
+
+t.  Made some internal changes that dramatically speeds up sequential indexed
+    array access.
+
+u.  Fixed a bug that caused the shell to write past the end of a string when
+    completing a double-quoted string ending in a backslash.
+
+v.  Fixed a bug that caused the shell to replace too many characters when a
+    pattern match was null in a ${foo//bar} expansion.
+
+w.  Fixed bugs in the expansion of ** that caused duplicate directory names
+    and the contents of the current directory to be omitted.
+
+x.  Fixed a bug that caused $? to not be set correctly when referencing an
+    unset variable with set -u and set -e enabled.
+
+y.  Fixed a bug caused by executing an external program from the DEBUG trap
+    while a pipeline was running.  The effect was to disturb the pipeline
+    state, occasionally causing it to hang.
+
+z.  Fixed a bug that caused the ** glob expansion to dump core if it
+    encountered an unsearchable directory.
+
+aa. Fixed a bug that caused `command -v' and `command -V' to not honor the
+    path set by the -p option.
+
+bb. Fixed a bug that caused brace expansion to take place too soon in some
+    compound array assignments.
+
+cc. Fixed a bug that caused programmable completion functions' changes to
+    READLINE_POINT to not be reflected back to readline.
+
+dd. Fixed a bug that caused the shell to dump core if a trap was executed
+    during a shell assignment statement.
+
+ee. Fixed an off-by-one error when computing the number of positional
+    parameters for the ${@:0:n} expansion.
+
+ff. Fixed a problem with setting COMP_CWORD for programmable completion
+    functions that could leave it set to -1.
+
+gg. Fixed a bug that caused the ERR trap to be triggered in some cases where
+    `set -e' would not have caused the shell to exit.
+
+hh. Fixed a bug that caused changes made by `compopt' to not persist past the
+    completion function in which compopt was executed.
+
+ii. Fixed a bug that caused the list of hostname completions to not be cleared
+    when HOSTNAME was unset.
+
+jj. Fixed a bug that caused variable expansion in here documents to look in
+    any temporary environment.
+
+kk. Bash and readline can now convert file names between precomposed and
+    decomposed Unicode on Mac OS X ("keyboard" and file system forms,
+    respectively).  This affects filename completion (using new
+    rl_filename_rewrite_hook), globbing, and readline redisplay.
+
+ll. The ERR and EXIT traps now see a non-zero value for $? when a parser
+    error after set -e has been enabled causes the shell to exit.
+
+mm. Fixed a bug that in brace expansion that caused zero-prefixed terms to
+    not contain the correct number of digits.
+
+nn. Fixed a bug that caused the shell to free non-allocated memory when
+    unsetting an associative array which had had a value implicitly assigned
+    to index "0".
+
+oo. Fixed a memory leak in the ${!prefix@} expansion.
+
+pp. Fixed a bug that caused printf to not correctly report all write errors.
+
+qq. Fixed a bug that caused single and double quotes to act as delimiters
+    when splitting a command line into words for programmable completion.
+
+rr. Fixed a bug that caused ** globbing that caused **/path/* to match every
+    directory, not just those matching `path'.
+
+ss. Fixed a bug that caused the shell to dump core when running `help' without
+    arguments if the terminal width was fewer than 7 characters.
+
+2.  Changes to Readline
+
+a.  The SIGWINCH signal handler now avoids calling the redisplay code if
+    one arrives while in the middle of redisplay.
+
+b.  Changes to the timeout code to make sure that timeout values greater
+    than one second are handled better.
+
+c.  Fixed a bug in the redisplay code that was triggered by a prompt
+    containing invisible characters exactly the width of the screen.
+
+d.  Fixed a bug in the redisplay code encountered when running in horizontal
+    scroll mode.
+
+e.  Fixed a bug that prevented menu completion from properly completing
+    filenames.
+
+f.  Fixed a redisplay bug caused by a multibyte character causing a line to
+    wrap.
+
+g.  Fixed a bug that caused key sequences of two characters to not be
+    recognized when a longer sequence identical in the first two characters
+    was bound.
+
+h.  Fixed a bug that caused history expansion to be attempted on $'...'
+    single-quoted strings.
+
+i.  Fixed a bug that caused incorrect redisplay when the prompt contained
+    multibyte characters in an `invisible' sequence bracketed by \[ and
+    \].
+
+j.  Fixed a bug that caused history expansion to short-circuit after
+    encountering a multibyte character.
+
+3.  New Features in Bash
+
+a.  Here-documents within $(...) command substitutions may once more be
+    delimited by the closing right paren, instead of requiring a newline.
+
+b.  Bash's file status checks (executable, readable, etc.) now take file
+    system ACLs into account on file systems that support them.
+
+c.  Bash now passes environment variables with names that are not valid
+    shell variable names through into the environment passed to child
+    processes.
+
+d.  The `execute-unix-command' readline function now attempts to clear and
+    reuse the current line rather than move to a new one after the command
+    executes.
+
+e.  `printf -v' can now assign values to array indices.
+
+f.  New `complete -E' and `compopt -E' options that work on the "empty"
+    completion: completion attempted on an empty command line.
+
+g.  New complete/compgen/compopt -D option to define a `default' completion:
+    a completion to be invoked on command for which no completion has been
+    defined.  If this function returns 124, programmable completion is
+    attempted again, allowing a user to dynamically build a set of completions
+    as completion is attempted by having the default completion function
+    install individual completion functions each time it is invoked.
+
+h.  When displaying associative arrays, subscripts are now quoted.
+
+i.  Changes to dabbrev-expand to make it more `emacs-like': no space appended
+    after matches, completions are not sorted, and most recent history entries
+    are presented first.
+
+j.  The [[ and (( commands are now subject to the setting of `set -e' and the
+    ERR trap.
+
+k.  The source/. builtin now removes NUL bytes from the file before attempting
+    to parse commands.
+
+l.  There is a new configuration option (in config-top.h) that forces bash to
+    forward all history entries to syslog.
+
+m.  A new variable $BASHOPTS to export shell options settable using `shopt' to
+    child processes.
+
+n.  There is a new confgure option that forces the extglob option to be
+    enabled by default.
+
+o.  New variable $BASH_XTRACEFD; when set to an integer bash will write xtrace
+    output to that file descriptor.
+
+p.  If the optional left-hand-side of a redirection is of the form {var}, the
+    shell assigns the file descriptor used to $var or uses $var as the file
+    descriptor to move or close, depending on the redirection operator.
+
+q.  The < and > operators to the [[ conditional command now do string
+    comparison according to the current locale.
+
+r.  Programmable completion now uses the completion for `b' instead of `a'
+    when completion is attempted on a line like: a $(b c.
+
+s.  Force extglob on temporarily when parsing the pattern argument to
+    the == and != operators to the [[ command, for compatibility.
+
+t.  Changed the behavior of interrupting the wait builtin when a SIGCHLD is
+    received and a trap on SIGCHLD is set to be Posix-mode only.
+
+u.  The read builtin has a new `-N nchars' option, which reads exactly NCHARS
+    characters, ignoring delimiters like newline.
+
+4.  New Features in Readline
+
+a.  New bindable function: menu-complete-backward.
+
+b.  In the vi insertion keymap, C-n is now bound to menu-complete by default,
+    and C-p to menu-complete-backward.
+
+c.  When in vi command mode, repeatedly hitting ESC now does nothing, even
+    when ESC introduces a bound key sequence.  This is closer to how
+    historical vi behaves.
+
+d.  New bindable function: skip-csi-sequence.  Can be used as a default to
+    consume key sequences generated by keys like Home and End without having
+    to bind all keys.
+
+e.  New application-settable function: rl_filename_rewrite_hook.  Can be used
+    to rewite or modify filenames read from the file system before they are
+    compared to the word to be completed.
+
+f.  New bindable variable: skip-completed-text, active when completing in the
+    middle of a word.  If enabled, it means that characters in the completion
+    that match characters in the remainder of the word are "skipped" rather
+    than inserted into the line.
+
+g.  The pre-readline-6.0 version of menu completion is available as
+    "old-menu-complete" for users who do not like the readline-6.0 version.
+
+h.  New bindable variable: echo-control-characters.  If enabled, and the
+    tty ECHOCTL bit is set, controls the echoing of characters corresponding
+    to keyboard-generated signals.
+
+i.  New bindable variable: enable-meta-key.  Controls whether or not readline
+    sends the smm/rmm sequences if the terminal indicates it has a meta key
+    that enables eight-bit characters.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-4.0-release,
+and the previous version, bash-4.0-rc1.
+
+1.  Changes to Bash
+
+a.  Changed the message printed when setlocale(3) fails to only include the
+    strerror error text if the call changes errno.
+
+b.  Changed trap command execution to reset the line number before running a
+    trap (except DEBUG and RETURN traps).
+
+c.  Fixed behavior of case-modifiying word expansions to not work on
+    individual words within a variable's value.
+
+d.  Fixed a bug that caused mapfile to not be interruptible when run in an
+    interactive shell.
+
+e.  Fixed a bug that caused mapfile to not run callbacks for the first line
+    read.
+
+f.  Fixed a bug that caused mapfile to not honor EOF typed in an interactive
+    shell.
+
+g.  Fixed the coprocess reaping code to not run straight from a signal handler.
+
+h.  Fixed a bug that caused printf -b to ignore the first % conversion specifier
+    in the format string on 64-bit systems.
+
+i.  Fixed a bug that caused incorrect word splitting when `:', `=', or `~'
+    appeared in $IFS.
+
+j.  Fixed a bug that caused data corruption in the programmable completion code
+    when a shell function called from a completion aborted execution.
+
+k.  Fixed a bug that caused the CPU usage reported by the `time' builtin to be
+    capped at 100%.
+
+l.  Changed behavior of shell when -e option is in effect to reflect consensus
+    of Posix shell standardization working group.
+
+m.  Fixed a bug introduced in bash-4.0-alpha that caused redirections to not
+    be displayed by `type' or `declare' when appearing in functions under
+    certain circumstances.
+
+2.  Changes to Readline
+
+a.  Fixed a bug that caused !(...) extended glob patterns to inhibit later
+    history expansion.
+
+b.  Reworked the signal handling to avoid calling disallowed functions from a
+    signal handler.
+
+3.  New Features in Bash
+
+a.  `readarray' is now a synonym for `mapfile'.
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-4.0-rc1,
+and the previous version, bash-4.0-beta2.
+
+1.  Changes to Bash
+
+a.  Fixed a bug that caused parsing errors when a $()-style command
+    substitution was follwed immediately by a quoted newline.
+
+b.  Fixed a bug that caused extended shell globbing patterns beginning with
+    `*(' to not work when used with pattern substitution word expansions.
+ 
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-4.0-beta2,
+and the previous version, bash-4.0-beta.
+
+1.  Changes to Bash
+
+a.  Fixed a bug that caused failed word expansions to set $? but not
+    PIPESTATUS.
+
+b.  Changed filename completion to quote the tilde in a filename with a
+    leading tilde that exists in the current directory.
+
+c.  Fixed a bug that caused a file descriptor leak when performing
+    redirections attached to a compound command.
+
+d.  Fixed a bug that caused expansions of $@ and $* to not exit the shell if
+    the -u option was enabled and there were no posititional parameters.
+
+e.  Fixed a bug that resulted in bash not terminating immediately if a
+    terminating signal was received while performing output.
+
+f.  Fixed a bug that caused the shell to crash after creating 256 process
+    substitutions during word completion.
+
+2.  Changes to Readline
+
+a.  Fixed a bug that caused redisplay errors when using prompts with invisible
+    characters and numeric arguments to a command in a multibyte locale.
+
+b.  Fixed a bug that caused redisplay errors when using prompts with invisible
+    characters spanning more than two physical screen lines.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-4.0-beta,
+and the previous version, bash-4.0-alpha.
+
+1.  Changes to Bash
+
+a.  Fixed a typo that caused a variable to be used before initialization
+    while parsing Posix-style command substitutions.
+
+b.  Fixed a bug that caused stray ^? when the expansion of a parameter used
+    as part of a pattern removal expansion is empty, but part of a non-
+    empty string.
+
+c.  Fixed a bug that could cause strings not converted to numbers by strtol
+    to be treated as if the conversion had been successful.
+
+d.  The `return' builtin now accepts no options and requires a `--' before
+    a negative return value, as Posix requires.
+
+e.  Fixed a bug that caused local variables to be created with the empty
+    string for a value rather than no value.
+
+f.  Changed behavior so the shell now acts as if it received an interrupt
+    when a pipeline is killed by SIGINT while executing a list.
+
+g.  Fixed a bug that caused `declare var' and `typeset var' to initialize
+    `var' to the empty string.
+
+h.  Changed `bind' builtin to print a warning but proceed if invoked when
+    line editing is not active.
+
+i.  Fixed a bug that caused the shell to exit when the `errexit' option is
+    set and a command in a pipeline returns a non-zero exit status.
+
+j.  Fixed a bug that caused the shell to not run the exit trap in a command
+    run with `bash -c' under some circumstances.
+
+k.  Fixed a bug that caused parser errors to occasionally not set $? when
+    running commands with `eval'.
+
+l.  Fixed a bug that caused stray control characters when evaluating compound
+    array assignments containing $'\x7f' escapes.
+
+m.  Fixed a bug that caused redirections involving file descriptor 10 as the
+    target to behave incorrectly.
+
+n.  Fixed a bug that could cause memory to be freed multiple times when
+    assigning to COMP_WORDBREAKS.
+
+o.  Fixed a bug that could cause NULL pointer dereferences when COMP_WORDBREAKS
+    was unset.
+
+2.  Changes to Readline
+
+3.  New Features in Bash
+
+a.  A value of 0 for the -t option to `read' now returns success if there is
+    input available to be read from the specified file descriptor.
+
+b.  CDPATH and GLOBIGNORE are ignored when the shell is running in privileged
+    mode.
+
+c.  New bindable readline functions shell-forward-word and shell-backward-word,
+    which move forward and backward words delimited by shell metacharacters
+    and honor shell quoting.
+
+d.  New bindable readline functions shell-backward-kill-word and shell-kill-word
+    which kill words backward and forward, but use the same word boundaries
+    as shell-forward-word and shell-backward-word.
+
+4.  New Features in Readline
+
+a.  If the kernel supports it, readline displays special characters
+    corresponding to a keyboard-generated signal when the signal is received.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-4.0-alpha,
+and the previous version, bash-3.2-release.
+
+1.  Changes to Bash
+
+a.  Fixed several bugs in old-style `` command substitution parsing, including
+    comment parsing and quoted string handling.
+
+b.  Fixed problems parsing arguments to the [[ command's =~ regular expression
+    matching operator:  metacharacter and whitespace parsing.
+
+c.  Fixed a bug that caused the shell to inappropriately reuse high-numbered
+    file descriptors it used internally.
+
+d.  Fixed a bug in pattern replacement word expansions that caused a `/' as
+    the first character of an expanded pattern to be mistaken for a global
+    replacement specifier.
+
+e.  Fixed several problems with the asprintf and snprintf replacement functions
+    that caused hangs and crashes.
+
+f.  Fixed a bug in the calculation of the current and previous job that caused
+    it to refer to incorrect jobs.
+
+g.  Fixed a bug in the check for the validity of a hashed command pathname that
+    caused unnecessary hash table deletions and additions.
+
+h.  Fixed a bug that caused child processes to inherit the wrong value for $!.
+
+i.  Fixed a bug that caused `.' to fail to read and execute commands from non-
+    regular files such as devices or named pipes.
+
+j.  Fixed a bug in printf formatting for the %x and %X expansions that occurred
+    on some systems.
+
+k.  Fixed a bug that caused the shell to crash when creating temporary files if
+    $TMPDIR named a non-writable directory.
+
+l.  Fixed a bug that caused the shell to ignore $TMPDIR when creating temporary
+    files under some circumstances.
+
+m.  Fixed a bug that caused named pipes created by process substitution to not
+    be cleaned up.
+
+n.  Fixed a bug that caused HISTTIMEFORMAT to not be honored when it appeared
+    in the initial shell environment.
+
+o.  Fixed several bugs in the expansion of $* and $@ (quoted and unquoted)
+    when IFS is null or contains non-whitespace characters; the same changes
+    apply to arrays subscripted with * or @.
+
+p.  Fixed several problems with pattern substitution expansions on the
+    positional parameters and arrays subscripted with * or @ that occurred
+    when $IFS was set to the empty string.
+
+q.  Made a change to the default locale initialization code that should
+    result in better behavior from the locale-aware library functions.
+
+r.  Fixed a bug that caused compacting the jobs list to drop jobs.
+
+s.  Fixed a bug that caused jumps back to the top-level processing loop from
+    a builtin command to leave the shell in an inconsistent state.
+
+t.  Fixed a bug that caused characters that would be escaped internally to be
+    doubled when escaped with a backslash.
+
+u.  Fixed the initialization of mailboxes to not cause maildirs to be read
+    (and stat(2) called for every message file) at shell startup.
+
+v.  Fixed a bug that caused the shell to not display $PS2 when the read builtin
+    reads a line continued with a backslash.
+
+w.  Fixed a bug that caused errors in word splitting when $IFS contained
+    characters used for internal quoting.
+
+x.  Fixed bugs that caused problems with output from shell builtins not being
+    completely displayed on some systems.
+
+y.  Fixed a bug that caused output to be lost when a redirection is acting on
+    the shell's output file descriptor.
+
+z.  Fixed bugs caused by shell builtins not checking for all write errors.
+
+aa. Fixed a problem that caused the shell to dump core if expansions on the
+    pattern passed to the pattern removal word expansions resulted in expansion
+    errors.
+
+bb. Fixed a bug that caused bash to loop infinitely after creating and
+    waiting for 4096 jobs.
+
+cc. Fixed a bug that caused bash to lose the status of a background job under
+    certain circumstances.
+
+dd. Fixed a bug that caused bash to not look in the temporary environment
+    when performing variable lookup under certain circumstances.
+
+ee. Fixed a bug that caused bash to close file descriptors greater than 10
+    when they were used in redirections.
+
+ff. Fixed a problem that caused the shell to attempt to read from the standard
+    input when called as `bash -i script'.
+
+gg. Fixed a memory leak and variable initialization problems when the -v option
+    was supplied to `printf' that could cause incorrect results.
+
+hh. Fixed a bug that caused the `read' builtin to count bytes when the -n option
+    was supplied, rather than (possibly multibyte) characters.
+
+ii. Fixed a bug when displaying a function due to not converting the function
+    to an external form.
+
+jj. Changed job control initialization to ensure that the shell has a tty
+    as its controlling terminal before enabling job control.
+
+kk. Fixed a bug with the `test' builtin that caused it to misinterpret
+    arguments beginning with `-' but containing more than one character.
+
+ll. Fixed bug that could cause the shell to dump core in certain cases where
+    a command sets the SIGINT disposition to the default.
+
+mm. Fixed a bug in the pattern replacement (affecting both word expansion
+    and the `fc' builtin) that occurred when the pattern and replacement
+    strings were empty.
+
+nn. Fixed a bug that caused an arithmetic evaluation error to disable all
+    further evaluation.
+
+oo. Fixed a bug in pathname expansion that caused it to interpret backslashes
+    in the pathname as quoting characters.
+
+pp. Fixed a bug in the replacement getcwd() implementation that could cause
+    memory to be overwritten.
+
+qq. When in Posix mode, the `ulimit' builtin now uses a block size of 512 for
+    the `-c' and `-f' options.
+
+rr. Brace expansion now allows process substitutions to pass through unchanged.
+
+ss. Fixed a problem in the command name completion code to avoid quoting
+    escaped special characters twice when the command name begins with a tilde.
+
+tt. Fixed a problem in the printf builtin that resulted in single-byte
+    output for the "'" escape, even when using multibyte characters.
+
+uu. Fixed a bug that caused the failure exit status to be lost when redirections
+    attached to a compound command failed.
+
+vv. Fixed a bug that caused the internal random number generator to not be
+    re-seeded correctly when creating a subshell.
+
+ww. Fixed a bug that could cause the bash replacement getcwd to overwrite
+    memory.
+
+xx. Fixed a bug that caused the shell to not receive SIGINT if it was sent
+    while the shell was waiting for a command substitution to terminate, and
+    make sure the exit status is correct when it does.
+
+yy. Fixed a bug that resulted in the second and subsequent children spawned
+    by a shell begun to run a command substitution being placed into the
+    wrong process group.
+
+zz. Fixed a bug that caused the results of successful tilde expansion to be
+    subject to pathname expansion and word splitting.
+
+aaa. Fixed a bug that could cause the shell to hang if it encountered an
+     error that caused it to jump back to the top processing loop during a
+     command substitution or `eval' command.
+
+bbb. Fixed a bug that caused the `read' builtin to use the tty's attributes
+     instead of those of the file descriptor passed with the -u option when
+     processing the -n and -d options.
+
+ccc. Fixed a bug that caused incorrect expansion of ${array[@]:foo} if the
+     first character of $IFS was not whitespace.
+
+ddd. Fixed a bug that occurred when scanning for the ending delimiter of a
+     ${parameter/pat/sub} expansion.
+
+eee. Fixed a bug that caused the shell to inappropriately expand command
+     substitutions in words when expanding directory names for completion.
+
+fff. Fixed a bug that caused the `fc' builtin to look too far back in the
+     history list under certain circumstances.
+
+ggg. Fixed a bug that caused a shell running in Posix mode to search $PWD for
+     a file specified as an argument to source/. when the file was not found
+     in $PATH.
+
+hhh. Fixed a bug that caused the shell to modify the case of a command word
+     found via command completion when the shell was performing case-
+     insensitive completion.
+
+iii. Fixed a bug that caused the shell to search $PATH for an argument to
+     source/. even when it contained a `/'.
+
+jjj. Fixed a bug that caused brace expansion to misorder expansions when the
+     locale did not have a collating order like aAbBcC...zZ.
+
+kkk. Fixed a bug that did not allow `set +o history' to have any effect when
+     run in a startup file or from a sourced file.
+
+lll. Fixed a bug with the precedence of the ?: conditional arithmetic operator.
+
+mmm. Fixed a bug that caused side effects of temporary variable assignments
+     to persist in the shell environment.
+
+nnn. Fixed a bug that caused the terminal to be left in non-canonical mode
+     when using editing commands that invoke the an editor on the current
+     command line.
+
+ooo. Fixed a bug that caused globbing characters and characters in $IFS to not
+     be quoted appropriately when displaying assignment statements.
+
+ppp. Fixed a bug that caused the `-e' option to be inherited when sourcing a
+     file or evaluating a command with `eval' even if the return value of the
+     command was supposed to be ignored.
+
+qqq. Fixed a bug that caused the shell to attempt to created variables with
+     invalid names if such names appeared in the initial environment.
+
+rrr. Fixed a bug with quote removal in strings where the final character is a
+     backslash.
+
+sss. Fixed a bug that caused the effects of special variables to persist even
+     when the variables were unset as part of the shell reinitializing itself
+     to execute a shell script.
+
+ttt. Fixed a bug that caused the history to not be saved after `history -c' or
+     `history -d' was executed until a sufficient number of commands had been
+     saved to the history.
+
+uuu. Bash now parses command substitutions according to Posix rules: parsing
+     the command contained in $() to find the closing delimiter.
+
+vvv. Fixed a bug that caused traps on SIGCHLD set in a SIGCHLD handler to
+     not persist.
+
+www. Fixed a bug that didn't allow SIGCHLD to interrupt the `wait' builtin
+     as Posix specifies.
+
+xxx. Invalid numeric arguments to shell builtins no longer cause the shell to
+     short-circuit any executing compound command.
+
+yyy. Fixed a bug that caused the exit status to be lost when `break' was
+     used to short-circuit a loop's execution.
+
+zzz. Fixed a bug that caused stray ^? characters to be left in expansions of
+     "${array[*]}".
+
+aaaa. Bash now prints better error messages for here documents terminated by
+      EOF and for identifying the incorrect token in an invalid arithmetic
+      expression.
+
+bbbb. Fixed a bug in the variable length word expansion that caused it to
+      incorrectly calculate the number of multibyte characters.
+
+cccc. Fixed a race condition that could result in the top-level shell setting
+      the terminal's process group to an incorrect value if the process
+      group was changed by a child of a child of the shell.
+
+dddd. Fixed a bug that caused here documents belonging to commands within a
+      compound command to be displayed in a syntactially-incorrect form, which
+      prevented them from being re-read as input.
+
+eeee. The shell displays more warnings about failures to set the locale.
+
+ffff. Fixed a bug that caused the body of a here-document to not be saved to
+      the history list.
+
+gggg. Fixed a bug that caused configure to incorrectly conclude that FreeBSD
+      had /dev/fd available, resulting in problems with process substitution.
+
+2.  Changes to Readline
+
+a.  Fixed a number of redisplay errors in environments supporting multibyte 
+    characters.
+
+b.  Fixed bugs in vi command mode that caused motion commands to inappropriately
+    set the mark.
+
+c.  When using the arrow keys in vi insertion mode, readline allows movement
+    beyond the current end of the line (unlike command mode).
+
+d.  Fixed bugs that caused readline to loop when the terminal has been taken
+    away and reads return -1/EIO.
+
+e.  Fixed bugs in redisplay occurring when displaying prompts containing
+    invisible characters.
+
+f.  Fixed a bug that caused the completion append character to not be reset to
+    the default after an application-specified completion function changed it.
+
+g.  Fixed a problem that caused incorrect positioning of the cursor while in
+    emacs editing mode when moving forward at the end of a line while using
+    a locale supporting multibyte characters.
+
+h.  Fixed an off-by-one error that caused readline to drop every 511th
+    character of buffered input.
+
+i.  Fixed a bug that resulted in SIGTERM not being caught or cleaned up.
+
+j.  Fixed redisplay bugs caused by multiline prompts with invisible characters
+    or no characters following the final newline.
+
+k.  Fixed redisplay bug caused by prompts consisting solely of invisible
+    characters.
+
+l.  Fixed a bug in the code that buffers characters received very quickly in
+    succession which caused characters to be dropped.
+
+m.  Fixed a bug that caused readline to reference uninitialized data structures
+    if it received a SIGWINCH before completing initialization.
+
+n.  Fixed a bug that caused the vi-mode `last command' to be set incorrectly
+    and therefore unrepeatable.
+
+o.  Fixed a bug that caused readline to disable echoing when it was being used
+    with an output file descriptor that was not a terminal.
+
+p.  Readline now blocks SIGINT while manipulating internal data structures
+    during redisplay.
+
+q.  Fixed a bug in redisplay that caused readline to segfault when pasting a
+    very long line (over 130,000 characters).
+
+r.  Fixed bugs in redisplay when using prompts with no visible printing
+    characters.
+
+3.  New Features in Bash
+
+a.  When using substring expansion on the positional parameters, a starting
+    index of 0 now causes $0 to be prefixed to the list.
+
+b.  The `help' builtin now prints its columns with entries sorted vertically
+    rather than horizontally.
+
+c.  There is a new variable, $BASHPID, which always returns the process id of
+    the current shell.
+
+d.  There is a new `autocd' option that, when enabled, causes bash to attempt
+    to `cd' to a directory name that is supplied as the first word of a
+    simple command.
+
+e.  There is a new `checkjobs' option that causes the shell to check for and
+    report any running or stopped jobs at exit.
+
+f.  The programmable completion code exports a new COMP_TYPE variable, set to
+    a character describing the type of completion being attempted.
+
+g.  The programmable completion code exports a new COMP_KEY variable, set to
+    the character that caused the completion to be invoked (e.g., TAB).
+
+h.  If creation of a child process fails due to insufficient resources, bash
+    will try again several times before reporting failure.
+
+i.  The programmable completion code now uses the same set of characters as
+    readline when breaking the command line into a list of words.
+
+j.  The block multiplier for the ulimit -c and -f options is now 512 when in
+    Posix mode, as Posix specifies.
+
+k.  Changed the behavior of the read builtin to save any partial input received
+    in the specified variable when the read builtin times out.  This also
+    results in variables specified as arguments to read to be set to the empty
+    string when there is no input available.  When the read builtin times out,
+    it returns an exit status greater than 128.
+
+l.  The shell now has the notion of a `compatibility level', controlled by
+    new variables settable by `shopt'.  Setting this variable currently
+    restores the bash-3.1 behavior when processing quoted strings on the rhs
+    of the `=~' operator to the `[[' command.
+
+m.  The `ulimit' builtin now has new -b (socket buffer size) and -T (number
+    of threads) options.
+
+n.  The -p option to `declare' now displays all variable values and attributes
+    (or function values and attributes if used with -f).
+
+o.  There is a new `compopt' builtin that allows completion functions to modify
+    completion options for existing completions or the completion currently
+    being executed.
+
+p.  The `read' builtin has a new -i option which inserts text into the reply
+    buffer when using readline.
+
+q.  A new `-E' option to the complete builtin allows control of the default
+    behavior for completion on an empty line.
+
+r.  There is now limited support for completing command name words containing
+    globbing characters.
+
+s.  Changed format of internal help documentation for all builtins to roughly
+    follow man page format.
+
+t.  The `help' builtin now has a new -d option, to display a short description,
+    and a -m option, to print help information in a man page-like format.
+
+u.  There is a new `mapfile' builtin to populate an array with lines from a
+    given file.
+
+v.  If a command is not found, the shell attempts to execute a shell function
+    named `command_not_found_handle', supplying the command words as the
+    function arguments.
+
+w.  There is a new shell option: `globstar'.  When enabled, the globbing code
+    treats `**' specially -- it matches all directories (and files within
+    them, when appropriate) recursively.
+
+x.  There is a new shell option: `dirspell'.  When enabled, the filename
+    completion code performs spelling correction on directory names during
+    completion.
+
+y.  The `-t' option to the `read' builtin now supports fractional timeout
+    values.
+
+z.  Brace expansion now allows zero-padding of expanded numeric values and
+    will add the proper number of zeroes to make sure all values contain the
+    same number of digits.
+
+aa. There is a new bash-specific bindable readline function: `dabbrev-expand'.
+    It uses menu completion on a set of words taken from the history list.
+
+bb. The command assigned to a key sequence with `bind -x' now sets two new
+    variables in the environment of the executed command:  READLINE_LINE_BUFFER
+    and READLINE_POINT.  The command can change the current readline line
+    and cursor position by modifying READLINE_LINE_BUFFER and READLINE_POINT,
+    respectively.
+
+cc. There is a new &>> redirection operator, which appends the standard output
+    and standard error to the named file.
+
+dd. The parser now understands `|&' as a synonym for `2>&1 |', which redirects
+    the standard error for a command through a pipe.
+
+ee. The new `;&' case statement action list terminator causes execution to
+    continue with the action associated with the next pattern in the
+    statement rather than terminating the command.
+
+ff. The new `;;&' case statement action list terminator causes the shell to
+    test the next set of patterns after completing execution of the current
+    action, rather than terminating the command.
+
+gg. The shell understands a new variable: PROMPT_DIRTRIM.  When set to an
+    integer value greater than zero, prompt expansion of \w and \W  will
+    retain only that number of trailing pathname components and replace
+    the intervening characters with `...'.
+
+hh. There are new case-modifying word expansions: uppercase (^[^]) and
+    lowercase (,[,]).  They can work on either the first character or
+    array element, or globally.  They accept an optional shell pattern
+    that determines which characters to modify.  There is an optionally-
+    configured feature to include capitalization operators.
+
+ii. The shell provides associative array variables, with the appropriate
+    support to create, delete, assign values to, and expand them.
+
+jj. The `declare' builtin now has new -l (convert value to lowercase upon
+    assignment) and -u (convert value to uppercase upon assignment) options.
+    There is an optionally-configurable -c option to capitalize a value at
+    assignment.
+
+kk. There is a new `coproc' reserved word that specifies a coprocess: an
+    asynchronous command run with two pipes connected to the creating shell.
+    Coprocs can be named.  The input and output file descriptors and the
+    PID of the coprocess are available to the calling shell in variables
+    with coproc-specific names.
+
+4.  New Features in Readline
+
+a.  A new variable, rl_sort_completion_matches; allows applications to inhibit
+    match list sorting (but beware: some things don't work right if
+    applications do this).
+
+b.  A new variable, rl_completion_invoking_key; allows applications to discover
+    the key that invoked rl_complete or rl_menu_complete.
+
+c.  The functions rl_block_sigint and rl_release_sigint are now public and
+    available to calling applications who want to protect critical sections
+    (like redisplay).
+
+d.  The functions rl_save_state and rl_restore_state are now public and
+    available to calling applications; documented rest of readline's state
+    flag values.
+
+e.  A new user-settable variable, `history-size', allows setting the maximum
+    number of entries in the history list.
+
+f.  There is a new implementation of menu completion, with several improvements
+    over the old; the most notable improvement is a better `completions
+    browsing' mode.
+
+g.  The menu completion code now uses the rl_menu_completion_entry_function
+    variable, allowing applications to provide their own menu completion
+    generators.
+
+h.  There is support for replacing a prefix  of a pathname with a `...' when
+    displaying possible completions.  This is controllable by setting the
+    `completion-prefix-display-length' variable.  Matches with a common prefix
+    longer than this value have the common prefix replaced with `...'.
+
+i.  There is a new `revert-all-at-newline' variable.  If enabled, readline will
+    undo all outstanding changes to all history lines when `accept-line' is
+    executed.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-3.2-release,
+and the previous version, bash-3.2-beta.
+
+1.  Changes to Bash
+
+a.  Fixed a bug that caused the temporary environment passed to a command to
+    affect the shell's environment under certain circumstances.
+
+b.  Fixed a bug in the printf builtin that caused the %q format specifier to
+    ignore empty string arguments.
+
+c.  Improved multibyte character environment detection at configuration time.
+
+d.  Fixed a bug in the read builtin that left spurious escape characters in the
+    input after processing backslashes when assigning to an array variable.
+
+2.  Changes to Readline
+
+a.  Fixed a redisplay bug that occurred in multibyte-capable locales when the
+    prompt was one character longer than the screen width.
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-3.2-beta,
+and the previous version, bash-3.2-alpha.
+
+1.  Changes to Bash
+
+a.  Changed the lexical analyzer to treat locale-specific blank characters as
+    white space.
+
+b.  Fixed a bug in command printing to avoid confusion between redirections and
+    process substitution.
+
+c.  Fixed problems with cross-compiling originating from inherited environment
+    variables.
+
+d.  Added write error reporting to printf builtin.
+
+e.  Fixed a bug in the variable expansion code that could cause a core dump in
+    a multi-byte locale.
+
+f.  Fixed a bug that caused substring expansion of a null string to return
+    incorrect results.
+
+g.  BASH_COMMAND now retains its previous value while executing commands as the
+    result of a trap, as the documentation states.
+
+2.  Changes to Readline
+
+a.  Fixed a bug with prompt redisplay in a multi-byte locale to avoid redrawing
+    the prompt and input line multiple times.
+
+b.  Fixed history expansion to not be confused by here-string redirection.
+
+c.  Readline no longer treats read errors by converting them to newlines, as
+    it does with EOF.  This caused partial lines to be returned from readline().
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-3.2-alpha,
+and the previous version, bash-3.1-release.
+
+1.  Changes to Bash
+
+a.  Fixed a source bug that caused the minimal configuration to not compile.
+
+b.  Fixed memory leaks in error handling for the `read' builtin.
+
+c.  Changed the [[ and (( compound commands to set PIPESTATUS with their exit
+    status.
+
+d.  Fixed some parsing problems with compound array assignments.
+
+e.  Added additional configuration changes for: NetBSD (incomplete multibyte
+    character support)
+
+f.  Fixed two bugs with local array variable creation when shadowing a variable
+    of the same name from a previous context.
+
+g.  Fixed the `read' builtin to restore the correct set of completion functions
+    if a timeout occurs.
+
+h.  Added code to defer the initialization of HISTSIZE (and its stifling of the
+    history list) until the history file is loaded, allowing a startup file to
+    override the default value.
+
+i.  Tightened up the arithmetic expression parsing to produce better error
+    messages when presented with invalid operators.
+
+j.  Fixed the cross-compilation support to build the signal list at shell
+    invocation rather than compile time if cross-compiling.
+
+k.  Fixed multibyte support for non-gcc compilers (or compilers that do not
+    allow automatic array variable sizing based on a non-constant value).
+
+l.  Several fixes to the code that manages the list of terminated jobs and
+    their exit statuses, and the list of active and recently-terminated jobs
+    to avoid pid aliasing/wraparound and allocation errors.
+
+m.  Fixed a problem that allowed scripts to die due to SIGINT while waiting
+    for children, even when started in the background or otherwise ignoring
+    SIGINT.
+
+n.  Fixed a bug that caused shells invoked as -/bin/bash from not being
+    recognized as login shells.
+
+o.  Fixed a problem that caused shells in the background to give the terminal
+    to a process group other than the foreground shell process group.
+
+p.  Fixed a problem with extracting the `varname' in ${#varname}.
+
+q.  Fixed the code that handles SIGQUIT to not exit immediately -- thereby
+    calling functions that may not be called in a signal handler context --
+    but set a flag and exit afterward (like SIGINT).
+
+r.  Changed the brace expansion code to skip over braces that don't begin a
+    valid matched brace expansion construct.
+
+s.  Fixed `typeset' and `declare' to not require that their shell function
+    operands to be valid shell identifiers.
+
+t.  Changed `test' to use access(2) with a temporary uid/euid swap when testing
+    file attributes and running setuid, and access(2) in most other cases.
+
+u.  Changed completion code to not attempt command name completion on a line
+    consisting solely of whitespace when no_empty_command_completion is set.
+
+v.  The `hash' builtin now prints nothing in posix mode when the hash table is
+    empty, and prints a message to that effect to stdout instead of stderr
+    when not in posix mode.
+
+w.  Fixed a bug in the extended pattern matching code that caused it to fail to
+    match periods with certain patterns.
+
+x.  Fixed a bug that caused the shell to dump core when performing filename
+    generation in directories with thousands of files.
+
+y.  Returned to the original Bourne shell rules for parsing ``:  no recursive
+    parsing of embedded quoted strings or ${...} constructs.
+
+z.  The inheritance of the DEBUG, RETURN, and ERR traps is now dependent only
+    on the settings of the `functrace' and `errtrace' shell options, rather
+    than whether or not the shell is in debugging mode.
+
+aa. Fixed a problem with $HOME being converted to ~ in the expansion of
+    members of the DIRSTACK array.
+
+bb. Fixed a problem with quoted arguments to arithmetic expansions in certain
+    constructs.
+
+cc. The command word completion code now no longer returns matching directories
+    while searching $PATH.
+
+dd. Fixed a bug with zero-padding and precision handling in snprintf()
+    replacement.
+
+ee. Fixed a bug that caused the command substitution code not to take embedded
+    shell comments into account.
+
+ff. Fixed a bug that caused $((...);(...)) to be misinterpreted as an
+    arithmetic substitution.
+
+gg. Fixed a bug in the prompt expansion code that inappropriately added a
+    \001 before a \002 under certain circumstances.
+
+hh. Fixed a bug that caused `unset LANG' to not properly reset the locale
+    (previous versions would set the locale back to what it was when bash
+    was started rather than the system's "native" locale).
+
+ii. Fixed a bug that could cause file descriptors > 10 to not be closed even
+    when closed explicitly by a script.
+
+jj. Fixed a bug that caused single quotes to be stripped from ANSI-C quoting
+    inside double-quoted command substitutions.
+
+kk. Fixed a bug that could cause core dumps when `return' was executed as the
+    last element of a pipeline inside a shell function.
+
+ll. Fixed a bug that caused DEBUG trap strings to overwrite commands stored in
+    the jobs list.
+
+2.  Changes to Readline
+
+a.  Fixed a problem that caused segmentation faults when using readline in
+    callback mode and typing consecutive DEL characters on an empty line.
+
+b.  Fixed several redisplay problems with multibyte characters, all having to
+    do with the different code paths and variable meanings between single-byte
+    and multibyte character redisplay.
+
+c.  Fixed a problem with key sequence translation when presented with the
+    sequence \M-\C-x.
+
+d.  Fixed a problem that prevented the `a' command in vi mode from being
+    undone and redone properly.
+
+e.  Fixed a problem that prevented empty inserts in vi mode from being undone
+    properly.
+
+f.  Fixed a problem that caused readline to initialize with an incorrect idea
+    of whether or not the terminal can autowrap.
+
+g.  Fixed output of key bindings (like bash `bind -p') to honor the setting of
+    convert-meta and use \e where appropriate.
+
+h.  Changed the default filename completion function to call the filename
+    dequoting function if the directory completion hook isn't set.  This means
+    that any directory completion hooks need to dequote the directory name,
+    since application-specific hooks need to know how the word was quoted,
+    even if no other changes are made.
+
+i.  Fixed a bug with creating the prompt for a non-interactive search string
+    when there are non-printing characters in the primary prompt.
+
+j.  Fixed a bug that caused prompts with invisible characters to be redrawn
+    multiple times in a multibyte locale.
+
+k.  Fixed a bug that could cause the key sequence scanning code to return the
+    wrong function.
+
+l.  Fixed a problem with the callback interface that caused it to fail when
+    using multi-character keyboard macros.
+
+m.  Fixed a bug that could cause a core dump when an edited history entry was
+    re-executed under certain conditions.
+
+n.  Fixed a bug that caused readline to reference freed memory when attmpting
+    to display a portion of the prompt.
+
+3.  New Features in Bash
+
+a.  Changed the parameter pattern replacement functions to not anchor the
+    pattern at the beginning of the string if doing global replacement - that
+    combination doesn't make any sense.
+
+b.  When running in `word expansion only' mode (--wordexp option), inhibit
+    process substitution.
+
+c.  Loadable builtins now work on MacOS X 10.[34].
+
+d.  Shells running in posix mode no longer set $HOME, as POSIX requires.
+
+e.  The code that checks for binary files being executed as shell scripts now
+    checks only for NUL rather than any non-printing character.
+
+f.  Quoting the string argument to the [[ command's  =~ operator now forces
+    string matching, as with the other pattern-matching operators.
+
+4.  New Features in Readline
+
+a.  Calling applications can now set the keyboard timeout to 0, allowing
+    poll-like behavior.
+
+b.  The value of SYS_INPUTRC (configurable at compilation time) is now used as
+    the default last-ditch startup file.
+
+c.  The history file reading functions now allow windows-like \r\n line
+    terminators.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-3.1-release,
+and the previous version, bash-3.1-rc2.
+
+1.  Changes to Readline
+
+a.  Several changes to the multibyte redisplay code to fix problems with
+    prompts containing invisible characters.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-3.1-rc2,
+and the previous version, bash-3.1-rc1.
+
+1.  Changes to Bash
+
+a.  Fixed a bug that caused a DEBUG trap to overwrite a command string that's
+    eventually attached to a background job.
+
+b.  Changed some code so that filenames with leading tildes with spaces in the
+    name aren't tilde-expanded by the bash completion code.
+
+c.  Fixed a bug that caused the pushd builtin to fail to change to
+    directories with leading `-'.
+
+d.  Fixed a small memory leak in the programmable completion code.
+
+2.  Changes to Readline
+
+a.  Fixed a redisplay bug caused by moving the cursor vertically to a line
+    with invisible characters in the prompt in a multibyte locale.
+
+b.  Fixed a bug that could cause the terminal special chars to be bound in the
+    wrong keymap in vi mode.
+
+3.  New Features in Bash
+
+a.  If compiled for strict POSIX conformance, LINES and COLUMNS may now
+    override the true terminal size.
+
+4.  New Features in Readline
+
+a.  A new external application-controllable variable that allows the LINES
+    and COLUMNS environment variables to set the window size regardless of
+    what the kernel returns.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-3.1-rc1,
+and the previous version, bash-3.1-beta1.
+
+1.  Changes to Bash
+
+a.  Fixed a bug that could cause core dumps due to accessing the current
+    pipeline while in the middle of modifying it.
+
+b.  Fixed a bug that caused pathnames with backslashes still quoting characters
+    to be passed to opendir().
+
+c.  Command word completion now obeys the setting of completion-ignore-case.
+
+d.  Fixed a problem with redirection that caused file descriptors greater than
+    2 to be inappropriately marked as close-on-exec.
+
+e.  In Posix mode, after `wait' is called to wait for a particular process
+    explicitly, that process is removed from the list of processes known to
+    the shell, and subsequent attempts to wait for it return errors.
+
+f.  Fixed a bug that caused extended pattern matching to incorrectly scan
+    backslash-escaped pattern characters.
+
+g.  Fixed a synchronization problem that could cause core dumps when handling
+    a SIGWINCH.
+
+h.  Fixed a bug that caused an unmatched backquote to be accepted without an
+    error when processing here documents.
+
+i.  Fixed a small memory leak in the `cd' builtin.
+
+j.  Fix for MacOS X so it gets the values for the HOSTTYPE, MACHTYPE, and
+    OSTYPE variables at build time, to support universal binaries.
+
+k.  Fixed a bug that could cause an exit trap to return the exit status of
+    the trap command rather than the status as it was before the trap was
+    run as the shell's exit status.
+
+2.  New Features in Bash
+
+3.  Changes to Readline
+
+a.  Fixed a bug that caused reversing the incremental search direction to
+    not work correctly.
+
+b.  Fixed the vi-mode `U' command to only undo up to the first time insert mode
+    was entered, as Posix specifies.
+
+c.  Fixed a bug in the vi-mode `r' command that left the cursor in the wrong
+    place.
+
+4.  New Features in Readline
+
+a.  New application-callable auxiliary function, rl_variable_value, returns
+    a string corresponding to a readline variable's value.
+
+b.  When parsing inputrc files and variable binding commands, the parser
+    strips trailing whitespace from values assigned to boolean variables
+    before checking them.
+
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-3.1-beta1,
+and the previous version, bash-3.1-alpha1.
+
+1.  Changes to Bash
+
+a.  Added some system-specific signal names.
+
+b.  Fixed a typo in the ulimit builtin to make `x' the right option to
+    manipulate the limit on file locks.
+
+c.  Fixed a problem with using += to append to index 0 of an array variable
+    when not using subscript syntax.
+
+d.  A few changes to configure.in to remove calls to obsolete or outdated
+    macros.
+
+e.  Make sure changes to variables bash handles specially (e.g., LC_ALL) are
+    made when the variable is set in the temporary environment to a command.
+
+f.  Make sure changes to variables bash handles specially (e.g., LC_ALL) are
+    made when the variable is modified using `printf -v'.
+
+g.  The export environment is now remade on cygwin when HOME is changed, so
+    DLLs bash is linked against pick up the new value.  This fixes problems
+    with tilde expansion when linking against and already-installed readline.
+
+h.  Small fix to the logic for performing tilde expansion in posix mode, so
+    expansion on the right-hand side of an assignment statement takes place.
+
+i.  Fixed a bug that prevented redirections associated with a shell function
+    from being executed when in a subshell.
+
+j.  Fixed `source' and `.' builtins to not require an executable file when
+    searching $PATH for a file to source.
+
+k.  Fixed a bug that caused incorrect word splitting in a function when IFS
+    was declared local, then unset.
+
+l.  Fixed a problem with the `kill' builtin that prevented sending signals
+    to a process group under certain circumstances when providing a pid < 0.
+
+m.  When in POSIX mode, `pwd' now checks that the value it prints is the same
+    directory as `.', even when displaying $PWD.
+
+n.  Fixed a problem with the `read' builtin when reading a script from standard
+    input and reading data from the same file.
+
+o.  Fixed a problem with the `type' and `command' builtins that caused absolute
+    pathnames to be displayed incorrectly.
+
+p.  Some changes to the `bg' builtin for POSIX conformance.
+
+q.  The `fc' builtin now removes the `fc' command that caused it to invoke an
+    editor on specified history entries from the history entirely, rather than
+    simply ignoring it.
+
+r.  When in POSIX mode, the `v' command in vi editing mode simply invokes vi
+    on the current command, rather than checking $FCEDIT and $EDITOR.
+
+s.  Fixed a small memory leak in the pathname canonicalization code.
+
+t.  Fixed a bug that caused the expanded value of a $'...' string to be
+    incorrectly re-quoted if it occurred within a double-quoted ${...}
+    parameter expansion.
+
+u.  Restored default emacs-mode key binding of M-TAB to dynamic-complete-history.
+
+v.  Fixed a bug that caused core dumps when interrupting loops running builtins
+    on some systems.
+
+w.  Make sure that some of the functions bash provides replacements for are
+    not cpp defines.
+
+x.  The code that scans embedded commands for the parser (`...` and $(...)) is
+    now more aware of embedded comments and their effect on quoted strings.
+
+y.  Changed the `-n' option to the `history' builtin to not reset the number of
+    history lines read in the current session after reading the new lines from
+    the history file if the history is being appended when it is written to
+    the file, since the appending takes care of the problem that the adjustment
+    was intended to solve.
+
+z.  Improved the error message displayed when a shell script fails to execute
+    because the environment and size of command line arguments are too large.
+
+aa. A small fix to make sure that $HISTCMD is evaluated whenever the shell is
+    saving commands to the history list, not just when HISTSIZE is defined.
+
+2.  Changes to Readline
+
+a.  The `change-case' command now correctly changes the case of multibyte
+    characters.
+
+b.  Changes to the shared library construction scripts to deal with Windows
+    DLL naming conventions for Cygwin.
+
+c.  Fixed the redisplay code to avoid core dumps resulting from a poorly-timed
+    SIGWINCH.
+
+d.  Fixed the non-incremental search code in vi mode to dispose of any current
+    undo list when copying a line from the history into the current editing
+    buffer.
+
+e.  The variable assignment code now ignores whitespace at the end of lines
+    when assigning to boolean variables.
+
+f.  The `C-w' binding in incremental search now understands multibyte
+    characters.
+
+3.  New Features in Bash
+
+a.  A new configuration option, `--enable-strict-posix-default', which will
+    build bash to be POSIX conforming by default.
+
+4.  New Features in Readline
+
+a.  If the rl_completion_query_items is set to a value < 0, readline never
+    asks the user whether or not to view the possible completions.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-3.1-alpha1,
+and the previous version, bash-3.0-release.
+
+1.  Changes to Bash
+
+a.  Fixed a bug that caused bash to crash if referencing an unset local array.
+
+b.  Fixed a problem that caused tilde expansion to not be performed before
+    attempting globbing word completion.
+
+c.  Fixed an incompatibility so that a first argument to trap that's a valid
+    signal number will be trated as a signal rather than a command to execute.
+
+d.  Fixed ${#word} expansion to correctly compute the length of a string
+    containing multibyte characters.
+
+e.  Fixed a bug that caused bash to not pass the correct flags for signal
+    disposition to child processes.
+
+f.  Fixed a bug that caused `fc -l' to list one too many history entries.
+
+g.  Some fixes to `fc' for POSIX conformance.
+
+h.  Some fixes to job status display for POSIX conformance.
+
+i.  Fixed a bug that caused `command -v' to display output if a command was not
+    found -- it should be silent.
+
+j.  In POSIX mode, `type' and `command -[vV]' do not report non-executable
+    files, even if the shell will attempt to execute them.
+
+k.  Fixed a bug that caused the `==' operator to the [[ command to not attempt
+    extended pattern matching.
+
+l.  Fixed the brace expansion code to handle characters whose value exceeds 128.
+
+m.  Fixed `printf' to handle strings with a leading `\0' whose length is
+    non-zero.
+
+n.  Fixed a couple of problems with brace expansion where `${' was handled
+    incorrectly.
+
+o.  Fixed off-by-one error when calculating the upper bound of `offset' when
+    processing the ${array[@]:offset:length} expansion.
+
+p.  System-specific configuration changes for: FreeBSD 5.x, Interix, MacOS X
+    10.4, Linux 2.4+ kernels, Linux 3.x kernels, Dragonfly BSD, QNX 6.x,
+    Cygwin
+
+q.  Fixed a bug that caused the shell to ignore the status of the rightmost
+    command in a pipeline when the `pipefail' option was enabled.
+
+r.  Fixed a completion bug that caused core dumps when expanding a directory
+    name.
+
+s.  Fixed a bug that prevented `hash -d' from removing commands from the hash
+    table.
+
+t.  Fixed word splitting to avoid really bad quadratic performance when
+    expanding long lists.
+
+u.  Fixed a bug that caused negative offsets in substring expansion to use the
+    wrong values.
+
+v.  Fixed a bug in printf that caused it to not return failure on write errors.
+
+w.  Fixed a bug that caused commands in subshells to not be properly timed.
+
+x.  The shell parser no longer attempts to parse a compound assignment specially
+    unless in a position where an assignment statement is acceptable or parsing
+    arguments to a builtin that accepts assignment statements.
+
+y.  Fixed a problem that caused a `case' statement to be added to the history
+    incorrectly as a single command if the `case word' was on one line and the
+    `in' on another.
+
+z.  Fixed a problem that caused internal shell quoting characters to be
+    incorrectly quoted with backslashes under some circumstances.
+
+aa. The shell now performs correct word splitting when IFS contains multibyte
+    characters.
+
+bb. The mail checking code now resets the cached file information if the size
+    drops to 0, even if the times don't change.
+
+cc. A completed command name that is found in $PATH as well as the name of a
+    directory in the current directory no longer has a slash appended in certain
+    circumstances:  a single instance found in $PATH when `.' is not in $PATH,
+    and multiple instances found in $PATH, even when `.' is in $PATH.
+
+dd. Incorporated tilde expansion into the word expansion code rather than as a
+    separately-called function, fixing some cases where it was performed
+    inappropriately (e.g., after the second `=' in an assignment statement or
+    in a double-quoted parameter expansion).
+
+ee. Fixed several bugs encountered when parsing compound assignment statements,
+    so that compound assignments appearing as arguments to builtins are no
+    longer double-expanded.
+
+ff. Fixed a bug in the command execution code that caused asynchronous commands
+    containing command substitutions to not put the terminal in the wrong
+    process group.
+
+gg. Bash now handles the case where the WCONTINUED flag causes waitpid() to
+    return -1/EINVAL at runtime as well as configuration time.
+
+hh. Fixed parser to generate an error when the pipeline `argument' to `!' or
+    `time' is NULL.
+
+ii. The shell now takes a little more care when manipulating file descriptors
+    greater than 9 with the `exec' builtin.
+
+jj. Fixed a bug that caused variable assignments preceding the `command' builtin
+    preceding a special builtin to be preserved after the command completed in
+    POSIX mode.
+
+kk. Fixed a bug that allowed variables beginning with a digit to be created.
+
+ll. Fixed a bug that caused a \<newline> to be removed when parsing a $'...'
+    construct.
+
+mm. A shell whose name begins with `-' will now be a restricted shell if the
+    remainder of the name indicates it should be restricted.
+
+nn. Fixed a bug that could cause a core dump if FUNCNAME were changed or unset
+    during a function's execution.
+
+oo. Fixed a bug that caused executing a `return' in a function to not execute
+    a RETURN trap.  The RETURN trap is inherited by shell functions only if
+    function tracing is globally enabled or has been enabled for that function.
+
+pp. Fixed cases where var[@] was not handled exactly like var, when var is a
+    scalar variable.
+
+qq. Fixed a bug that caused the first character after a SIGINT to be discarded
+    under certain circumstances.
+
+rr. Fixed exit status code so that a suspended job returns 128+signal as its
+    exit status (preventing commands after it in `&&' lists from being
+    executed).
+
+ss. Fixed a bug that caused the shell parser state to be changed by executing
+    a shell function as a result of word completion.
+
+tt. Fixed a long-standing bug that caused '\177' characters in variable
+    values to be discarded when expanded in double-quoted strings.
+
+uu. Fixed a bug that caused $RANDOM to be re-seeded multiple times in a
+    subshell environment.
+
+vv. Extensive changes to the job management code to avoid the pid-reuse and
+    pid-aliasing problems caused by retaining the exit status of too many jobs,
+    but still retain as many background job statuses as POSIX requires.
+
+ww. Fixed a parser bug in processing \<newline> that caused things like
+
+		((echo 5) \
+		 (echo 6))
+
+    to not work correctly.
+
+xx. `pwd -P' now sets $PWD to a directory name containing no symbolic links
+    when in posix mode, as POSIX requires.
+
+yy. In posix mode, bash no longer sets $PWD to a name containing no symbolic
+    links if a directory is chosen from $CDPATH.
+
+zz. The word splitting code now treats an IFS character that is not space,
+    tab, or newline and any adjacent IFS white space as a single delimiter, as
+    SUSv3/XPG6 require.
+
+aaa. The `read' builtin now checks whether or not the number of fields read is
+     exactly the same as the number of variables instead of just assigning the
+     rest of the line (minus any trailing IFS white space) to the last
+     variable.  This is what POSIX/SUS/XPG all require.
+
+bbb. Fixed a bug that caused `read' to always check whether or not fd 0 was a
+     pipe, even when reading from another file descriptor.
+
+ccc. Fixed a bug that caused short-circuiting of execution even if the return
+     value was being inverted.
+
+ddd. Fixed a bug that caused a core dump while decoding \W escapes in PS1 if
+     PWD was unset.
+
+eee. Fixed a bug in `read' that counted internal quoting characters for the
+     purposes of `read -n'.
+
+fff. Fixed a bug so that a function definition in a pipeline causes a child
+     process to be forked at the right time.
+
+ggg. Bash will not attempt to link against a readline library that doesn't
+     have rl_gnu_readline_p == 1.
+
+hhh. Fixed a bug that caused `read' to consume one too many characters when
+     reading a fixed number of characters and the Nth character is a backslash.
+
+iii. Fixed a bug that caused `unset' on variables in the temporary environment
+     to leave them set when `unset' completed.
+
+jjj. Fixed a bug that caused bash to close fd 2 if an `exec' failed and the
+     shell didn't exit.
+
+kkk. The completion code is more careful to not turn `/' or `///' into `//',
+     for those systems on which `//' has special meaning.
+
+lll. Fixed a bug that caused command substitution in asynchronous commands to
+     close the wrong file descriptors.
+
+mmm. The shell no longer prints status messages about terminated background
+     processes unless job control is active.
+
+nnn. Fixed a bug that prevented multiple consecutive invocations of `history -s'
+     from adding all the commands to the history list.
+
+ooo. Added a couple of changes to make arithmetic expansion more consistent in
+     all its contexts (still not perfect).
+
+ppp. Fixed a bug that caused the parser to occasionally not find the right
+     terminating "`" in an old-style command substitution.
+
+qqq. Fixed a bug that caused core dumps when the shell was reading its non-
+     interactive input from fd 0 and fd 0 was duplicated and restored using a
+     combination of `exec' (to save) and redirection (to restore).
+
+rrr. Fixed a problem that caused loops in sourced scripts to not be cleaned
+     up properly when a `return' is executed.
+
+sss. Change internal command substitution completion function to append a slash
+     to directory names in the command.
+
+2.  Changes to Readline
+
+a.  Fixed a bug that caused multiliine prompts to be wrapped and displayed
+    incorrectly.
+
+b.  Fixed a bug that caused ^P/^N in emacs mode to fail to display the current
+    line correctly.
+
+c.  Fixed a problem in computing the number of invisible characters on the first
+    line of a prompt whose length exceeds the screen width.
+
+d.  Fixed vi-mode searching so that failure preserves the current line rather
+    than the last line in the history list.
+
+e.  Fixed the vi-mode `~' command (change-case) to have the correct behavior at
+    end-of-line when manipulating multibyte characters.
+
+f.  Fixed the vi-mode `r' command (change-char) to have the correct behavior at
+    end-of-line when manipulating multibyte characters.
+
+g.  Fixed multiple bugs in the redisplay of multibyte characters:  displaying
+    prompts longer than the screen width containing multibyte characters, 
+
+h.  Fix the calculation of the number of physical characters in the prompt
+    string when it contains multibyte characters.
+
+i.  A non-zero value for the `rl_complete_suppress_append' variable now causes
+    no `/' to be appended to a directory name.
+
+j.  Fixed forward-word and backward-word to work when words contained
+    multibyte characters.
+
+k.  Fixed a bug in finding the delimiter of a `?' substring when performing
+    history expansion in a locale that supports multibyte characters.
+
+l.  Fixed a memory leak caused by not freeing the timestamp in a history entry.
+
+m.  Fixed a bug that caused "\M-x" style key bindings to not obey the setting
+    of the `convert-meta' variable.
+
+n.  Fixed saving and restoring primary prompt when prompting for incremental
+    and non-incremental searches; search prompts now display multibyte
+    characters correctly.
+
+o.  Fixed a bug that caused keys originally bound to self-insert but shadowed
+    by a multi-character key sequence to not be inserted.
+
+p.  Fixed code so rl_prep_term_function and rl_deprep_term_function aren't
+    dereferenced if NULL (matching the documentation).
+
+q.  Extensive changes to readline to add enough state so that commands
+    requiring additional characters (searches, multi-key sequences, numeric
+    arguments, commands requiring an additional specifier character like
+    vi-mode change-char, etc.) work without synchronously waiting for
+    additional input.
+
+r.  Lots of changes so readline builds and runs on MinGW.
+
+s.  Readline no longer tries to modify the terminal settings when running in
+    callback mode.
+
+t.  The Readline display code no longer sets the location of the last invisible
+    character in the prompt if the \[\] sequence is empty.
+
+3.  New Features in Bash
+
+a.  Bash now understands LC_TIME as a special variable so that time display
+    tracks the current locale.
+
+b.  BASH_ARGC, BASH_ARGV, BASH_SOURCE, and BASH_LINENO are no longer created
+    as `invisible' variables and may not be unset.
+
+c.  In POSIX mode, if `xpg_echo' option is enabled, the `echo' builtin doesn't
+    try to interpret any options at all, as POSIX requires.
+
+d.  The `bg' builtin now accepts multiple arguments, as POSIX seems to specify.
+
+e.  Fixed vi-mode word completion and glob expansion to perform tilde
+    expansion.
+
+f.  The `**' mathematic exponentiation operator is now right-associative.
+
+g.  The `ulimit' builtin has new options: -i (max number of pending signals),
+    -q (max size of POSIX message queues), and -x (max number of file locks).
+
+h.  A bare `%' once again expands to the current job when used as a job
+    specifier.
+
+i.  The `+=' assignment operator (append to the value of a string or array) is
+    now supported for assignment statements and arguments to builtin commands
+    that accept assignment statements.
+
+j.  BASH_COMMAND now preserves its value when a DEBUG trap is executed.
+
+k.  The `gnu_errfmt' option is enabled automatically if the shell is running
+    in an emacs terminal window.
+
+l.  New configuration option:  --single-help-strings.  Causes long help text
+    to be written as a single string; intended to ease translation.
+
+m.  The COMP_WORDBREAKS variable now causes the list of word break characters
+    to be emptied when the variable is unset.
+
+n.  An unquoted expansion of $* when $IFS is empty now causes the positional
+    parameters to be concatenated if the expansion doesn't undergo word
+    splitting.
+
+o.  Bash now inherits $_ from the environment if it appears there at startup.
+
+p.  New shell option: nocasematch.  If non-zero, shell pattern matching ignores
+    case when used by `case' and `[[' commands.
+
+q.  The `printf' builtin takes a new option: -v var.  That causes the output
+    to be placed into var instead of on stdout.
+
+r.  By default, the shell no longer reports processes dying from SIGPIPE.
+
+s.  Bash now sets the extern variable `environ' to the export environment it
+    creates, so C library functions that call getenv() (and can't use the
+    shell-provided replacement) get current values of environment variables.
+
+4.  New Features in Readline
+
+a.  The key sequence sent by the keypad `delete' key is now automatically
+    bound to delete-char.
+
+b.  A negative argument to menu-complete now cycles backward through the
+    completion list.
+
+c.  A new bindable readline variable:  bind-tty-special-chars.  If non-zero,
+    readline will bind the terminal special characters to their readline
+    equivalents when it's called (on by default).
+
+d.  New bindable command: vi-rubout.  Saves deleted text for possible
+    reinsertion, as with any vi-mode `text modification' command; `X' is bound
+    to this in vi command mode.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-3.0-release,
+and the previous version, bash-3.0-rc1.
+
+1.  Changes to Bash
+
+a.  Fixed a boundary overrun that could cause segmentation faults when the
+    completion code hands an incomplete construct to the word expansion
+    functions.
+
+b.  Changed posix mode behavior so that an error in a variable assignment
+    preceding a special builtin causes a non-interactive shell to exit.
+
+c.  Change the directory expansion portion of the completion code to not
+    expand embedded command substitutions if the directory name appears in
+    the file system.
+
+d.  Fixed a problem that caused `bash -r' to turn on restrictions before
+    reading the startup files.
+
+e.  Fixed a problem with the default operation of the `umask' builtin.
+
+2.  Changes to Readline
+
+a.  Fixed a problem with readline saving the contents of the current line
+    before beginning a non-interactive search.
+
+b.  Fixed a problem with EOF detection when using rl_event_hook.
+
+c.  Fixed a problem with the vi mode `p' and `P' commands ignoring numeric
+    arguments.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-3.0-rc1,
+and the previous version, bash-3.0-beta1.
+
+1.  Changes to Bash
+
+a.  Fixed a bug that caused incorrect behavior when referecing element 0 of
+    an array using $array, element 0 was unset, and `set -u' was enabled.
+
+b.  System-specific changes for: SCO Unix 3.2, Tandem.
+
+c.  Fixed a bug that caused inappropriate word splitting when a variable was
+    expanded within a double-quoted string that also included $@.
+
+d.  Fixed a bug that caused `pwd' to not display anything in physical mode
+    when the file system had changed underneath the shell.
+
+e.  Fixed a bug in the pre- and post- increment and decrement parsing in the
+    expression evaluator that caused errors when the operands and corresponding
+    operators were separated by whitespace.
+
+f.  Fixed a bug that caused `history -p' to add an entry to the history list,
+    counter to the documentation.  (Keeps the history expansions invoked by
+    emacs-mode command line editing from doing that as well.)
+
+g.  Fixed a bug that could cause a core dump if `cd' is asked to print out a
+    pathname longer than PATH_MAX characters.
+
+h.  Fixed a bug that caused jobs to be put into the wrong process group under
+    some circumstances after enabling job control with `set -m'.
+
+i.  `unalias' now  returns failure if no alias name arguments are supplied.
+
+j.  Documented the characters not allowed to appear in an alias name.
+
+k.  $* is no longer expanded as if in double quotes when it appears in the
+    body of a here document, as the SUS seems to require.
+
+l.  The `bashbug' script now uses a directory in $TMPDIR for exclusive
+    access rather than trying to guess how the underlying OS provides for
+    secure temporary file creation.
+
+m.  Fixed a few problems with `cd' and `pwd' when asked to operate on pathnames
+    longer than PATH_MAX characters.
+
+n.  Fixed a memory leak caused when creating multiple local array variables
+    with identical names.
+
+o.  Fixed a problem with calls to getcwd() so that bash now operates better
+    when the full pathname to the current directory is longer than PATH_MAX
+    bytes.
+
+p.  The `trap' builtin now reports an error if a single non-signal argument
+    is specified.
+
+q.  Fixed a bug that caused `umask' to not work correctly when presented
+    with a mask of all 0s.
+
+r.  When `getopts' reaches the end of options, OPTARG is unset, as POSIX
+    appears to specify.
+
+s.  Interactive mode now depends on whether or not stdin and stderr are
+    connected to a tty; formerly it  was stdin and stdout.  POSIX requires
+    this.
+
+t.  Fixed vi-mode completion to work more as POSIX specifies (e.g., doing the
+    right kind of filename generation).
+
+2.  Changes to Readline
+
+a.  Fixed a problem that could cause readline to refer to freed memory when
+    moving between history lines while doing searches.
+
+b.  Improvements to the code that expands and displays prompt strings
+    containing multibyte characters.
+
+c.  Fixed a problem with vi-mode not correctly remembering the numeric argument
+    to the last `c'hange command for later use with `.'.
+
+d.  Fixed a bug in vi-mode that caused multi-digit count arguments to work
+    incorrectly.
+
+e.  Fixed a problem in vi-mode that caused the last text modification command
+    to not be remembered across different command lines.
+
+f.  Fixed problems with changing characters and changing case at the end of
+    the line.
+
+3.  New Features in Bash
+
+a.  The `jobs', `kill', and `wait' builtins now accept job control notation
+    even if job control is not enabled.
+
+b.  The historical behavior of `trap' that allows a missing `action' argument
+    to cause each specified signal's handling to be reset to its default is
+    now only supported when `trap' is given a single non-option argument.
+
+4.  New Features in Readline
+
+a.  When listing completions, directories have a `/' appended if the
+    `mark-directories' option has been enabled.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-3.0-beta1,
+and the previous version, bash-3.0-alpha.
+
+1.  Changes to Bash
+
+a.  Fixes to build correctly when arrays are not compiled into the shell.
+
+b.  Fixed command substitution to run any exit trap defined in the command
+    substitution before returning; the exit trap is not inherited from the
+    calling shell.
+
+c.  Fixes to process group synchronization code so that every child process
+    attempts to set the terminal's process group; fixes some synchronization
+    problems on Linux kernels that schedule the child to always run before
+    the parent.
+
+d.  Fixed processing of octal and hex constants in printf builtin for POSIX.2
+    compliance.
+
+e.  Fixed a couple of core dumps in the pattern removal code.
+
+f.  Fixes to the array subrange extraction code to deal better with sparse
+    arrays.
+
+g.  Parser errors and other errors that result in the shell exiting now cause
+    the exit trap to be run.
+
+h.  Change the command substitution completion functions to not append any
+    closing quote, because it would be inserted a closing "`" or ")".
+
+i.  Fix history initialization so assignments to $histchars made in startup
+    files are honored.
+
+j.  If an exit trap does not contain a call to `exit', the shell now uses
+    the exit status of the last command executed before the trap as the exit
+    status of the shell.
+
+k.  The parser now prompts with $PS2 if it reads a newline while parsing a
+    compound array assignment statement.
+
+l.  When performing a compound array assignment, the parser doesn't treat
+    words of the form [index]=value as assignments if they're the result of
+    expansions.
+
+m.  Fixed a bug that caused `return' executed in a trap command to make the
+    shell think it was still running the trap.
+
+n.  Fixed the value of errno set by the pathname canonicalization functions.
+
+o.  Changed the grammar so that `time' alone on a line times a null command
+    rather than being a syntax error.
+
+p.  The pattern substitution code no longer performs quote removal on the
+    pattern before trying to match it, as the pattern removal functions do.
+
+q.  Fixed a bug that could cause core dumps when checking whether a quoted
+    command name was being completed.
+
+r.  Fixes to the pattern removal and pattern replacement expansions to deal
+    with multibyte characters better (and faster).
+
+s.  Fix to the substring expansion (${param:off[:len]}) to deal with (possibly
+    multibyte) characters instead of raw bytes.
+
+t.  Fixed a bug that caused some key bindings set in an inputrc to be ignored
+    at shell startup.
+
+u.  Fixed a bug that caused unsetting a local variable within a function to
+    not work correctly.
+
+v.  Fixed a bug that caused invalid variables to be created when using
+    `read -a'.
+
+w.  Fixed a bug that caused "$@" to expand incorrectly when used as the right
+    hand side of a parameter expansion such as ${word:="$@"} if the first
+    character of $IFS was not a space.
+
+x.  Fixed a slight cosmetic problem when printing commands containing a
+    `>&word' redirection.
+
+y.  Fixed a problem that could cause here documents to not be created correctly
+    if the system temporary directory did not allow writing.
+
+2.  Changes to Readline
+
+a.  Change to history expansion functions to treat `^' as equivalent to word
+    one, as the documentation states.
+
+b.  Some changes to the display code to improve display and redisplay of
+    multibyte characters.
+
+c.  Changes to speed up the multibyte character redisplay code.
+
+d.  Fixed a bug in the vi-mode `E' command that caused it to skip over the
+    last character of a word if invoked while point was on the word's
+    next-to-last character.
+
+e.  Fixed a bug that could cause incorrect filename quoting when
+    case-insensitive completion was enabled and the word being completed
+    contained backslashes quoting word break characters.
+
+f.  Fixed a bug in redisplay triggered when the prompt string contains
+    invisible characters.
+
+g.  Fixed some display (and other) bugs encountered in multibyte locales
+    when a non-ascii character was the last character on a line.
+
+h.  Fixed some display bugs caused by multibyte characters in prompt strings.
+
+i.  Fixed a problem with history expansion caused by non-whitespace characters
+    used as history word delimiters.
+
+3.  New Features in Bash
+
+a.  printf builtin understands two new escape sequences:  \" and \?.
+
+b.  `echo -e' understands two new escape sequences:  \" and \?.
+
+c.  The GNU `gettext' package and libintl have been integrated; the shell's
+    messages can be translated into different languages.
+
+d.  The `\W' prompt expansion now abbreviates $HOME as `~', like `\w'.
+
+e.  The error message printed when bash cannot open a shell script supplied
+    as argument 1 now includes the name of the shell, to better identify
+    the error as coming from bash.
+
+4.  New Features in Readline
+
+a.  New application variable, rl_completion_quote_character, set to any
+    quote character readline finds before it calls the application completion
+    function.
+
+b.  New application variable, rl_completion_suppress_quote, settable by an
+    application completion function.  If set to non-zero, readline does not
+    attempt to append a closing quote to a completed word.
+
+c.  New application variable, rl_completion_found_quote, set to a non-zero
+    value if readline determines that the word to be completed is quoted.
+    Set before readline calls any application completion function.
+
+d.  New function hook, rl_completion_word_break_hook, called when readline
+    needs to break a line into words when completion is attempted.  Allows
+    the word break characters to vary based on position in the line.
+
+e.  New bindable command: unix-filename-rubout.  Does the same thing as
+    unix-word-rubout, but adds `/' to the set of word delimiters.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-3.0-alpha,
+and the previous version, bash-2.05b-release.
+
+1.  Changes to Bash
+
+a.  Fixes so that the shell will compile without some of the default options
+    defined.
+
+b.  Fixed an error message that did not pass enough arguments to printf.
+
+c.  Fixed a bug that caused input redirection to a builtin inside a script
+    being read from standard input to result in the rest of the already-
+    read and buffered script to be discarded.
+
+d.  Fixed a bug that caused subshell initialization to close the file
+    descriptor from which the shell was reading a script under certain
+    circumstances.
+
+e.  Fixed a bug that caused the shell to not advance a string pointer over
+    a null wide character when doing string operations.
+
+f.  Fixed the internal logout code so that shells that time out waiting for
+    input (using $TMOUT) run ~/.bash_logout.
+
+g.  Portability and configuration changes for: cygwin, HP/UX, GNU/FreeBSD.
+
+h.  The parser no longer adds implicit double quotes to ((...)) arithmetic
+    commands.
+
+i.  The ((...)) arithmetic command evaluation code was fixed to not dump core
+    when the expanded string is null.
+
+j.  The ((...)) arithmetic command evaluation code was fixed to not perform
+    variable assignments while expanding the expression.
+
+k.  Fixed a bug that caused word splitting to be performed incorrectly when
+    IFS is set, but null.
+
+l.  Fixed a bug in brace expansion that caused a quoted `$' preceding an
+    open brace to inhibit brace expansion.
+
+m.  Fixed a bug that caused a leading `-' in the shell's name to cause it to
+    not be recognized as a restricted shell.
+
+n.  Fixed a bug in the arithmetic evaluation code that could cause longjmps
+    to an invalid location and result in a core dump.
+
+o.  Fixed a bug in the calculation of how many history lines are new in a
+    single shell session when reading new history lines from a file with
+    `history -n'.
+
+p.  Fixed a bug in pathname canonicalization that caused the shell to dump
+    core when presented with a pathname longer than PATH_MAX.
+
+q.  Fixed the parser so that it doesn't try to compare a char variable to
+    EOF, which fails when chars are unsigned.
+
+r.  Fixed a bug in the simple command execution code that caused occasional
+    core dumps.
+
+s.  The shell does a better job of saving any partial parsing state during
+    operations which cause a command to be executed while a line is being
+    entered and parsed.
+
+t.  The completion code now splits words more like the expansion code when
+    $IFS is used to split.
+
+u.  The locale code does a better job of recomputing the various locale
+    variable values when LC_ALL is unset.
+
+v.  The programmable completion code does a better job of dequoting expanded
+    word lists before comparing them against the word to be matched.
+
+w.  The shell no longer seg faults if the expanded value of $PS4 is null
+    and `set -x' is enabled.
+
+x.  Fixed a bug that caused core dumps when a here string expanded to NULL.
+
+y.  The mail checking code now makes sure the mailbox is bigger before
+    reporting the existence of new mail.
+
+z.  The parser does not try to expand $'...' and $"..." when the appear
+    within double quotes unless the `extquote' option has been enabled with
+    `shopt'.  For backwards compatibility, it is enabled by default.
+
+aa. Fixed a bug that caused `for x; do ...' and `select x; do ... to use
+    $@ instead of "$@" for the implicit list of arguments.
+
+bb. Fixed a bug that caused a subshell of a restricted shell (e.g., one
+    spawned to execute a pipeline) to not exit immediately if attempting
+    to use a command containing a slash.
+
+cc. Fixed a problem with empty replacements for a pattern that doesn't match
+    when performing ${param/word/} expansion.
+
+dd. Word expansions performed while expanding redirections no longer search
+    a command's temporary environment to expand variable values.
+
+ee. Improvements to the alias expansion code when expanding subsequent words
+    because an aliase's value ends with a space.
+
+ff. `cd -' now prints the current working directory after a successful chdir
+    even when the shell is not interactive, as the standard requires.
+
+gg. The shell does a better job of ensuring a child process dies of SIGINT
+    before resending SIGINT to itself.
+
+hh. The arithmetic expansion variable assignment code now does the right
+    thing when assigning to `special' variables like OPTIND.
+
+ii. When history expansion verification is enabled, the bash readline helper
+    functions that do history expansion on the current line don't print
+    the results.
+
+jj. Fixed bugs with multiple consecutive alias expansion when one of the
+    expansions ends with a space.
+
+kk. Fixed a problem in the programmable completion code that could cause core
+    dumps when trying to initialize a set of possible completions from a
+    list of variables.
+
+ll. The \[ and \] escape characters are now ignored when decoding the prompt
+    string if the shell is started with editing disabled.
+
+mm. Fixed a bug that could leave extra characters in a string when doing
+    quoted null character removal.
+
+nn. Command substitution and other subshell operations no longer reset the
+    line number (aids the bash debugger).
+
+oo. Better line number management when executing simple commands, conditional
+    commands, for commands, and select commands.
+
+pp. The globbing code now uses malloc, with its better failure properties,
+    rather than alloca().
+
+qq. Fixed a bug that caused expansions like #{a[2]:=value} to create the
+    appropriate array element instead of a variable named `a[2]'.
+
+rr. Fixed a bug in the handling of a `?(...)' pattern immediately following
+    a `*' when extglob is enabled.
+
+ss. Fixed a bug that caused a `return' invoked in an exit trap when exit is
+    invoked in a function to misbehave.
+
+tt. Fixed a bug that caused CTLESC and CTLNUL characters to not be escaped
+    by the internal shell string quoting functions.
+
+uu. Fixed a bug that caused quoted null characters in an expanded word list
+    to be inappropriately assigned to an array variable when using `read -a'.
+
+vv. Fixed a bug that caused redirections accompanying a null command to persist
+    in the current shell.
+
+ww. Fixed a bug that caused the prompt to be printed when the shell was
+    expanding a multiline alias.
+
+xx. Fixed a bug that resulted in core dumps when the completion for a command
+    changed the compspec.
+
+yy. Fixed a bug that caused evaluation of programmable completions to print
+    notifications of completed jobs.
+
+zz. Bash now disables line editing when $EMACS == `t' and $TERM == `dumb'
+    (which is what emacs shell windows do).
+
+aaa. In posix mode, `kill -l' causes signal names to be displayed without
+     a leading `SIG'.
+
+bbb. Clear error flag on standard output so it doesn't persist across multiple
+     builtin commands.
+
+ccc. In posix mode, `alias' displays alias values without the leading `alias',
+     so the output cannot be used as subsequent input.
+
+ddd. In posix mode, the `trap' builtin doesn't check whether or not its
+     first argument is a signal specification and revert the signal handling
+     to its original disposition if it is.
+
+eee. Fixed several bugs in the handling of "$*" and "${array[*]}" by the
+     pattern substitution and removal expansions.
+
+fff. Fixed several problems with the handling of ${array[@]}, ${array[*]},
+     $@, and $* by the indirect variable expansion code.
+
+ggg. Fixed a bug that did not allow `time' to be aliased.
+
+hhh. Improved the mail checking code so it won't check (and possibly cause an
+     NFS file system mount) until MAILPATH or MAIL is given a value -- there
+     is no default if DEFAULT_MAIL_DIRECTORY is not defined at compile time.
+     (It is computed by configure, but can be #undef'd in config-bot.h.)
+
+iii. If the `chkwinsize' option is enabled, the shell checks for window size
+     changes if a child process exits due to a signal.
+
+jjj. Removed the attempts to avoid adding a slash at the end of a completed
+     executable name if there was a directory with the same name in the
+     current directory.
+
+kkk. Fixed PATH lookup code so it treats the permission bits separately for
+     owner, group, and other, rather than checking them all.
+
+lll. Fixed the locale code to reset the parser's idea of the character class
+     <blank>, which controls how it splits tokens, when the locale changes.
+
+mmm. The shell now binds its special readline functions and key bindings only
+     if the user's inputrc file has not already bound them.
+
+nnn. The shell now reports on processes that dump core due to signals when
+     invoked as `-c command'.
+
+2.  Changes to Readline
+
+a.  Fixes to avoid core dumps because of null pointer references in the
+    multibyte character code.
+
+b.  Fix to avoid infinite recursion caused by certain key combinations.
+
+c.  Fixed a bug that caused the vi-mode `last command' to be set incorrectly.
+
+d.  Readline no longer tries to read ahead more than one line of input, even
+    when more is available.
+
+e.  Fixed the code that adjusts the point to not mishandle null wide
+    characters.
+
+f.  Fixed a bug in the history expansion `g' modifier that caused it to skip
+    every other match.
+
+g.  Fixed a bug that caused the prompt to overwrite previous output when the
+    output doesn't contain a newline and the locale supports multibyte
+    characters.  This same change fixes the problem of readline redisplay
+    slowing down dramatically as the line gets longer in multibyte locales.
+
+h.  History traversal with arrow keys in vi insertion mode causes the cursor
+    to be placed at the end of the new line, like in emacs mode.
+
+i.  The locale initialization code does a better job of using the right
+    precedence and defaulting when checking the appropriate environment
+    variables.
+
+j.  Fixed the history word tokenizer to handle <( and >( better when used as
+    part of bash.
+
+k.  The overwrite mode code received several bug fixes to improve undo.
+
+l.  Many speedups to the multibyte character redisplay code.
+
+m.  The callback character reading interface should not hang waiting to read
+    keyboard input.
+
+n.  Fixed a bug with redoing vi-mode `s' command.
+
+o.  The code that initializes the terminal tracks changes made to the terminal
+    special characters with stty(1) (or equivalent), so that these changes
+    are reflected in the readline bindings.  New application-callable function
+    to make it work:  rl_tty_unset_default_bindings().
+
+p.  Fixed a bug that could cause garbage to be inserted in the buffer when
+    changing character case in vi mode when using a multibyte locale.
+
+q.  Fixed a bug in the redisplay code that caused problems on systems
+    supporting multibyte characters when moving between history lines when the
+    new line has more glyphs but fewer bytes.
+
+r.  Undo and redo now work better after exiting vi insertion mode.
+
+s.  Make sure system calls are restarted after a SIGWINCH is received using
+    SA_RESTART.
+
+t.  Improvements to the code that displays possible completions when using
+    multibyte characters.
+
+u.  Fixed a problem when parsing nested if statements in inputrc files.
+
+v.  The completer now takes multibyte characters into account when looking for
+    quoted substrings on which to perform completion.
+
+w.  The history search functions now perform better bounds checking on the
+    history list.
+
+3.  New Features in Bash
+
+a.  ANSI string expansion now implements the \x{hexdigits} escape.
+
+b.  There is a new loadable `strftime' builtin.
+
+c.  New variable, COMP_WORDBREAKS, which controls the readline completer's
+    idea of word break characters.
+
+d.  The `type' builtin no longer reports on aliases unless alias expansion
+    will actually be performed.    
+
+e.  HISTCONTROL is now a colon-separated list of values, which permits
+    more extensibility and backwards compatibility.
+
+f.  HISTCONTROL may now include the `erasedups' option, which causes all lines
+    matching a line being added to be removed from the history list.
+
+g.  `configure' has a new `--enable-multibyte' argument that permits multibyte
+    character support to be disabled even on systems that support it.
+
+h.  New variables to support the bash debugger:  BASH_ARGC, BASH_ARGV,
+    BASH_SOURCE, BASH_LINENO, BASH_SUBSHELL, BASH_EXECUTION_STRING,
+    BASH_COMMAND
+
+i.  FUNCNAME has been changed to support the debugger: it's now an array
+    variable.
+
+j.  for, case, select, arithmetic commands now keep line number information
+    for the debugger.
+
+k.  There is a new `RETURN' trap executed when a function or sourced script
+    returns (not inherited child processes; inherited by command substitution
+    if function tracing is enabled and the debugger is active).
+
+l.  New invocation option:  --debugger.  Enables debugging and turns on new
+    `extdebug' shell option.
+
+m.  New `functrace' and `errtrace' options to `set -o' cause DEBUG and ERR
+    traps, respectively, to be inherited by shell functions.  Equivalent to
+    `set -T' and `set -E' respectively.  The `functrace' option also controls
+    whether or not the DEBUG trap is inherited by sourced scripts.
+
+n.  The DEBUG trap is run before binding the variable and running the action
+    list in a `for' command, binding the selection variable and running the
+    query in a `select' command, and before attempting a match in a `case'
+    command.
+
+o.  New `--enable-debugger' option to `configure' to compile in the debugger
+    support code.
+
+p.  `declare -F' now prints out extra line number and source file information
+    if the `extdebug' option is set.
+
+q.  If `extdebug' is enabled, a non-zero return value from a DEBUG trap causes
+    the next command to be skipped, and a return value of 2 while in a
+    function or sourced script forces a `return'.
+
+r.  New `caller' builtin to provide a call stack for the bash debugger.
+
+s.  The DEBUG trap is run just before the first command in a function body is
+    executed, for the debugger.
+
+t.  `for', `select', and `case' command heads are printed when `set -x' is
+    enabled.
+
+u.  There is a new {x..y} brace expansion, which is shorthand for {x.x+1,
+    x+2,...,y}.  x and y can be integers or single characters; the sequence
+    may ascend or descend; the increment is always 1.
+
+v.  New ksh93-like ${!array[@]} expansion, expands to all the keys (indices)
+    of array.
+
+w.  New `force_fignore' shopt option; if enabled, suffixes specified by
+    FIGNORE cause words to be ignored when performing word completion even
+    if they're the only possibilities.
+
+x.  New `gnu_errfmt' shopt option; if enabled, error messages follow the `gnu
+    style' (filename:lineno:message) format.
+
+y.  New `-o bashdefault' option to complete and compgen; if set, causes the
+    whole set of bash completions to be performed if the compspec doesn't
+    result in a match.
+
+z.  New `-o plusdirs' option to complete and compgen; if set, causes directory
+    name completion to be performed and the results added to the rest of the
+    possible completions.
+
+aa. `kill' is available as a builtin even when the shell is built without
+    job control.
+
+bb. New HISTTIMEFORMAT variable; value is a format string to pass to
+    strftime(3).  If set and not null, the `history' builtin prints out
+    timestamp information according to the specified format when displaying
+    history entries.  If set, bash tells the history library to write out
+    timestamp information when the history file is written.
+
+cc. The [[ ... ]] command has a new binary `=~' operator that performs
+    extended regular expression (egrep-like) matching.
+
+dd. `configure' has a new `--enable-cond-regexp' option (enabled by default)
+    to enable the =~ operator and regexp matching in [[ ... ]].
+
+ee. Subexpressions matched by the =~ operator are placed in the new
+    BASH_REMATCH array variable.
+
+ff. New `failglob' option that causes an expansion error when pathname
+    expansion fails to produce a match.
+
+gg. New `set -o pipefail' option that causes a pipeline to return a failure
+    status if any of the processes in the pipeline fail, not just the last
+    one.
+
+4.  New Features in Readline
+
+a.  History expansion has a new `a' modifier equivalent to the `g' modifier
+    for compatibility with the BSD csh.
+
+b.  History expansion has a new `G' modifier equivalent to the BSD csh `g'
+    modifier, which performs a substitution once per word.
+
+c.  All non-incremental search operations may now undo the operation of
+    replacing the current line with the history line.
+
+d.  The text inserted by an `a' command in vi mode can be reinserted with
+    `.'.
+
+e.  New bindable variable, `show-all-if-unmodified'.  If set, the readline
+    completer will list possible completions immediately if there is more
+    than one completion and partial completion cannot be performed.
+
+f.  There is a new application-callable `free_history_entry()' function.
+
+g.  History list entries now contain timestamp information; the history file
+    functions know how to read and write timestamp information associated
+    with each entry.
+
+h.  Four new key binding functions have been added:
+
+	rl_bind_key_if_unbound()
+	rl_bind_key_if_unbound_in_map()
+	rl_bind_keyseq_if_unbound()
+	rl_bind_keyseq_if_unbound_in_map()
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.05b-release,
+and the previous version, bash-2.05b-beta2.
+
+1.  Changes to Bash
+
+a.  Fixed an off-by-one error in the function that translates job
+    specifications.
+
+b.  Note that we're running under Emacs and disable line editing if
+    $EMACS == `t'.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.05b-beta2,
+and the previous version, bash-2.05b-beta1.
+
+1.  Changes to Bash
+
+a.  Fixed the /= and %= arithmetic operators to catch division by zero.
+
+b.  Added putenv, setenv, unsetenv to getenv replacement for completeness.
+
+c.  Fixed a bug that could cause the -O expand_aliases invocation option
+    to not take effect.
+
+d.  Fixed a problem with process substitution that resulted in incorrect
+    behavior when the number of process substitutions in an individual
+    command approached 64.
+
+2.  Changes to Readline
+
+a.  Fixed a problem with backward-char-search when on a system with support
+    for multibyte characters when running in a locale without any multibyte
+    characters.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.05b-beta1,
+and the previous version, bash-2.05b-alpha1.
+
+1.  Changes to Bash
+
+a.  Fixed a problem when parsing a POSIX.2 character class name while
+    evaluating a bracket expression containing multibyte characters.
+
+b.  Changed the help text for `bind' to make it clear that any command
+    that may be placed in ~/.inputrc is a valid argument to `bind'.
+
+c.  Added `help' builtin entries for `((', `[[', and arithmetic for.
+
+d.  malloc updated again:
+	o slightly better overflow and underflow detection by putting the
+	  chunk size at the beginning and end of the chunk and making
+	  sure they match in free/realloc
+	o partial page allocated to make things page-aligned no longer
+	  completely wasted
+	o block coalescing now enabled by default
+	o splitting and coalescing enabled for 32-byte chunks, the most
+	  common size requested
+	o fixed a problem that resulted in spurious underflow messages and
+	  aborts
+	o bin sizes are precomputed and stored in an array rather than
+	  being computed at run time
+	o malloc will return memory blocks back to the system if the block
+	  being freed is at the top of the heap and of sufficient size to
+	  make it worthwhile
+	o malloc/free/realloc now inline memset instead of calling the
+	  libc function; uses Duff's device for good performance
+
+e.  Check for getservent(); make the service name completion code dependent
+    on its presence.
+
+f.  Changed the readline callback that executes a command bound to a key
+    sequence to not save the executed command on the history list and to
+    save and restore the parsing state.
+
+g.  Changes to lib/sh/snprintf.c:  fixed some bugs in the `g' and `G'
+    floating point format display; implemented the "'" flag character
+    that turns on thousands' grouping; fixed behavior on systems where
+    MB_CUR_MAX does not evaluate to a constant.
+
+h.  The `unset' builtin no longer returns a failure status when asked to
+    unset a previously-unset variable or function.
+
+i.  Changes to the build system to make it easier to cross-compile bash
+    for different systems.
+
+j.  Added `,' to  the characters that are backslash-escaped during filename
+    completion, to avoid problems with complete-into-braces and RCS filenames
+    containing commas.
+
+k.  Some changes to the multibyte character support code to avoid many calls
+    to strlen().
+
+l.  Bash now correctly honors setting LANG to some value when LC_ALL does not
+    already have a value.
+
+m.  Fixed a bug that could cause SIGSEGV when processing nested traps with
+    trap handlers.
+
+n.  The `source/.' builtin now restores the positional parameters when it
+    returns unless they were changed using the `set' builtin during the file's
+    execution.
+
+o.  Fixed a bug that caused a syntax error when a command was terminated by
+    EOF.
+
+2.  New Features in Bash
+
+a.  There is now support for placing the long help text into separate files
+    installed into ${datadir}/bash.  Not enabled by default; can be turned
+    on with `--enable-separate-helpfiles' option to configure.
+
+b.  All builtins that take operands accept a `--' pseudo-option, except
+    `echo'.
+
+c.  The `echo' builtin now accepts \0xxx (zero to three octal digits following
+    the `0') in addition to \xxx (one to three octal digits) for SUSv3/XPG6/
+    POSIX.1-2001 compliance.
+
+3.  Changes to Readline
+
+a.  Fixed a small problem in _rl_insert_char with multibyte characters.
+
+b.  Fixes from IBM for line wrapping problems when using multibyte characters.
+
+c.  Fixed a problem which caused the display to be messed up when the last
+    line of a multi-line prompt (possibly containing invisible characters)
+    was longer than the screen width.
+
+d.  Fixed a problem with the vi-mode `r' command that occurred on systems with
+    support for multibyte characters when running in a locale without any
+    multibyte characters.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.05b-alpha1,
+and the previous version, bash-2.05a-release.
+
+1.  Changes to Bash
+
+a.  Some changes to work around inlining differences between compilers.
+
+b.  Added more prototypes for internal shell typedefs, to catch argument
+    passing errors when using pointers to functions.
+
+c.  The `cd' builtin now fails in posix mode when a valid directory cannot be
+    constructed from a relative pathname argument and the $PWD using pathname
+    canonicalization, and the -P option has not been supplied.  Previously,
+    the shell would attempt to use what the user typed, leading to weird
+    values for $PWD and discrepancies between the value of $PWD and the
+    actual working directory.
+
+d.  The `cd' builtin now resets $PWD when canonicalization fails but a chdir
+    to the pathname passed as an argument succeeds (when not in posix mode).
+
+e.  The `fc' builtin has been fixed, as POSIX requires, to use the closest
+    history position in range when given an out-of-range argument.
+
+f.  The history file loading code was changed to allow lines to be saved in
+    the history list from the shell startup files.
+
+g.  `history -s args' now works better in compound commands.
+
+h.  The tilde expansion code was fixed to better recognize when it's being
+    invoked in an assignment context, which enables expansion after `='
+    and `:'.
+
+i.  Fixed the command name completion code so a slash is no longer appended
+    to a single match if there happens to be a directory with that name in
+    $PWD.
+
+j.  Fixed compound array assignment to no longer perform alias expansion, to
+    allow reserved words as array members, and to not produce extra output
+    when the `-v' option had been enabled.
+
+k.  Fixed the programmable completion code to better handle newlines in lists
+    of possible completions (e.g., `complete -W').
+
+l.  Removed the reserved words from the `bash-builtins' manual page.
+
+m.  Parser error reporting now attempts to do a better job of identifying the
+    token in error rather than doing straight textual analysis.
+
+n.  Fixes for Inf/NaN, locales, wide/multibyte characters and zero-length
+    arguments in the library snprintf(3) replacement.
+
+o.  `read -e' no longer does command name completion on the first word on
+    the line being read.
+
+p.  `select' now returns failure if the read of the user's selection fails.
+
+q.  Fixed a bug that could cause a core dump when setting $PIPESTATUS.
+
+r.  Fixes to not allocate so many job slots when the shell is running a loop
+    with job control enabled in a subshell of an interactive shell.
+
+s.  Fixed a bug in the trap code that caused traps to be inherited by
+    command substitutions in some cases.
+
+t.  Fixed a bug that could cause alias expansion to inappropriately expand
+    the word following the alias.
+
+u.  Fixed a bug in the `kill' builtin that mishandled negative pid arguments.
+
+v.  The parser is less lenient when parsing assignment statements where the
+    characters before the `=' don't comprise a valid identifier.
+
+w.  The arithmetic expression evaluation code now honors the setting of the
+    `-u' option when expanding variable names.
+
+x.  Fixed the arithmetic evaluation code to allow array subscripts to be
+    assigned (`let b[7]=42') and auto-incremented and auto-decremented
+    (e.g., b[7]++).
+
+y.  Reimplemented the existing prompt string date and time expansions using
+    strftime(3), which changed the output of \@ in some locales.
+
+z.  Fixed a bug that could cause a core dump when a special shell variable
+    (like RANDOM) was converted to an array with a variable assignment.
+
+aa. Fixed a bug that would reset the handler for a signal the user had
+    trapped to a function that would exit the shell when setting the exit
+    trap in a non-interactive shell.
+
+bb. Changed the execve(2) wrapper code to check whether or not a failing
+    command is a directory before looking at whether a `#!' interpreter
+    failed for some reason.
+
+cc. Fixed a bug in the command printing code so it no longer inserts a `;'
+    after a newline, which produces a syntax error when reused as input.
+
+dd. The code that expands $PS4 no longer inherits the `-x' flag.
+
+ee. The bash-specific completion functions may now take advantage of the
+    double-TAB and M-?  features of the standard readline completion
+    functions.
+
+ff. The mail checking code no longer prints a message if the checked file's
+    size has not increased, even if the access time is less than the modification time.
+
+gg. Rewrote the variable symbol table code: there is now a stack of
+    contexts, each possibly including a separate symbol table; there can
+    be more than one temporary environment supplied to nested invocations
+    of `./source'; the temporary environments no longer require so much
+    special-case code; shell functions now handle the temporary environment
+    and local variables more consistently; function scope exit is faster now
+    that the entire symbol table does not have to be traversed to dispose of
+    local variables; it is now easier to push vars from the temporary
+    environment to the shell's variable table in posix mode; some duplicated
+    code has been removed.
+
+hh. Regularized the error message printing code; builtin_error is now called
+    more consistently, and common error message strings are handled by small
+    functions.  This should make eventual message translation easier.
+
+ii. Error messages now include the line number in a script when the shell
+    is not interactive.
+
+jj. Array subscript expansion now takes place even when the array variable is
+    unset, so side effects will take place.
+
+kk. Fixed a bug in the SICGHLD child-reaping code so that it won't find
+    jobs already marked as terminated if the OS reuses pids quickly enough.
+
+ll. Fixed a bug that could cause a signal to not interrupt the `wait'
+    builtin while it was waiting for a background process to terminate.
+
+mm. A couple of changes to make it easier for multiple shells to share history
+    files using `history -n', `history -r', and `history -w'.
+
+nn. The `getopts' builtin always increments OPTIND to point to the next
+    option to be handled when an option is returned, whether it's valid
+    or not, as POSIX 1003.x-2001 requires.
+
+oo. Changed some parts of the expansion code to avoid allocating and
+    immediately freeing memory without using the results for anything.
+
+pp. The shell now keeps track of $IFS internally, updating its internal map
+    each time the variable is assigned a new value (or at local scope exit).
+    This saves thousands of hash lookups for IFS, which, while individually
+    cheap, add up.
+
+qq. Rewrote the hash table code:  searching and insertion are much faster now,
+    and it uses a better string hashing function; augmented the function
+    interface to simplify other parts of the code and remove duplicated code
+
+rr. The shell now uses a simple, generic `object cache' for allocating and
+    caching words and word lists, which were the major users of
+    malloc/free.
+
+ss. Fixed the assignment statement parsing code to allow whitespace and
+    newlines in subscripts when performing array element assignment.
+
+tt. The shell now issues many fewer calls to sigprocmask and other signal
+    masking system calls.
+
+uu. Fixed the `test' and conditional command file comparison operators to
+    work right when one file has a non-positive timestamp and the other
+    does not exist.
+
+vv. Fixed some cases where the special characters '\001' and '\177' in the
+    values of variables or positional parameters caused incorrect expansion
+    results.
+
+2.  Changes to Readline
+
+a.  Fixed output of comment-begin character when listing variable values.
+
+b.  Added some default key bindings for common escape sequences produced by
+    HOME and END keys.
+
+c.  Fixed the mark handling code to be more emacs-compatible.
+
+d.  A bug was fixed in the code that prints possible completions to keep it
+    from printing empty strings in certain circumstances.
+
+e.  Change the key sequence printing code to print ESC as M\- if ESC is a
+    meta-prefix character -- it's easier for users to understand than \e.
+
+f.  Fixed unstifle_history() to return values that match the documentation.
+
+g.  Fixed the event loop (rl_event_hook) to handle the case where the input
+    file descriptor is invalidated.
+
+h.  Fixed the prompt display code to work better when the application has a
+    custom redisplay function.
+
+i.  Changes to make reading and writing the history file a little faster, and
+    to cope with huge history files without calling abort(3) from xmalloc.
+
+j.  The vi-mode `S' and `s' commands are now undone correctly.
+
+3.  New Features in Bash
+
+a.  If set, TMOUT is the default timeout for the `read' builtin.
+
+b.  `type' has two new options:  `-f' suppresses shell function lookup, and
+    `-P' forces a $PATH search.
+
+c.  New code to handle multibyte characters.
+
+d.  `select' was changed to be more ksh-compatible, in that the menu is
+    reprinted each time through the loop only if REPLY is set to NULL.
+    The previous behavior is available as a compile-time option.
+
+e.  `complete -d' and `complete -o dirnames' now force a slash to be
+    appended to names which are symlinks to directories.
+
+f.  There is now a bindable edit-and-execute-command readline command,
+    like the vi-mode `v' command, bound to C-xC-e in emacs mode.
+
+g.  Added support for ksh93-like [:word:] character class in pattern matching.
+
+h.  The  $'...' quoting construct now expands \cX to Control-X.
+
+i.  A new \D{...} prompt expansion; passes the `...' to strftime and inserts
+    the result into the expanded prompt.
+
+j.  The shell now performs arithmetic in the largest integer size the
+    machine supports (intmax_t), instead of long.
+
+k.  If a numeric argument is supplied to one of the bash globbing completion
+    functions, a `*' is appended to the word before expansion is attempted.
+
+l.  The bash globbing completion functions now allow completions to be listed
+    with double tabs or if `show-all-if-ambiguous' is set.
+
+m.  New `-o nospace' option for `complete' and `compgen' builtins; suppresses
+    readline's appending a space to the completed word.
+
+n.  New `here-string' redirection operator:  <<< word.
+
+o.  When displaying variables, function attributes and definitions are shown
+    separately, allowing them to be re-used as input (attempting to re-use
+    the old output would result in syntax errors).
+
+p.  There is a new configuration option `--enable-mem-scramble', controls
+    bash malloc behavior of writing garbage characters into memory at
+    allocation and free time.
+
+q.  The `complete' and `compgen' builtins now have a new `-s/-A service'
+    option to complete on names from /etc/services.
+
+r.  `read' has a new `-u fd' option to read from a specified file descriptor.
+
+s.  Fix the completion code so that expansion errors in a directory name
+    don't cause a longjmp back to the command loop.
+
+t.  Fixed word completion inside command substitution to work a little more
+    intuitively.
+
+u.  The `printf' %q format specifier now uses $'...' quoting to print the
+    argument if it contains non-printing characters.
+
+v.  The `declare' and `typeset' builtins have a new `-t' option.  When applied
+    to functions, it causes the DEBUG trap to be inherited by the named
+    function.  Currently has no effect on variables.
+
+w.  The DEBUG trap is now run *before* simple commands, ((...)) commands,
+    [[...]] conditional commands, and for ((...)) loops.
+
+x.  The expansion of $LINENO inside a shell function is only relative to the
+    function start if the shell is interactive -- if the shell is running a
+    script, $LINENO expands to the line number in the script.  This is as
+    POSIX-2001 requires.
+
+y.  The bash debugger in examples/bashdb has been modified to work with the
+    new DEBUG trap semantics, the command set has been made more gdb-like,
+    and the changes to $LINENO make debugging functions work better.  Code
+    from Gary Vaughan.
+
+z.  New [n]<&word- and [n]>&word- redirections from ksh93 -- move fds (dup
+    and close).
+
+aa. There is a new `-l' invocation option, equivalent to `--login'.
+
+bb. The `hash' builtin has a new `-l' option to list contents in a reusable
+    format, and a `-d' option to remove a name from the hash table.
+
+4.  New Features in Readline
+
+a.  Support for key `subsequences':  allows, e.g., ESC and ESC-a to both
+    be bound to readline functions.  Now the arrow keys may be used in vi
+    insert mode.
+
+b.  When listing completions, and the number of lines displayed is more than
+    the screen length, readline uses an internal pager to display the results.
+    This is controlled by the `page-completions' variable (default on).
+
+c.  New code to handle editing and displaying multibyte characters.
+
+d.  The behavior introduced in bash-2.05a of deciding whether or not to
+    append a slash to a completed name that is a symlink to a directory has
+    been made optional, controlled by the `mark-symlinked-directories'
+    variable (default is the 2.05a behavior).
+
+e.  The `insert-comment' command now acts as a toggle if given a numeric
+    argument:  if the first characters on the line don't specify a
+    comment, insert one; if they do, delete the comment text
+
+f.  New application-settable completion variable:
+    rl_completion_mark_symlink_dirs, allows an application's completion
+    function to temporarily override the user's preference for appending
+    slashes to names which are symlinks to directories.
+
+g.  New function available to application completion functions:
+    rl_completion_mode, to tell how the completion function was invoked
+    and decide which argument to supply to rl_complete_internal (to list
+    completions, etc.).
+
+h.  Readline now has an overwrite mode, toggled by the `overwrite-mode'
+    bindable command, which could be bound to `Insert'.
+
+i.  New application-settable completion variable:
+    rl_completion_suppress_append, inhibits appending of
+    rl_completion_append_character to completed words.
+
+j.  New key bindings when reading an incremental search string:  ^W yanks
+    the currently-matched word out of the current line into the search
+    string; ^Y yanks the rest of the current line into the search string,
+    DEL or ^H deletes characters from the search string.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.05a-release,
+and the previous version, bash-2.05a-rc1.
+
+1.  Changes to Bash
+
+a.  Fixed the `printf' builtin so that the variable name supplied as an
+    argument to a %n conversion must be a valid shell identifier.
+
+b.  Improved the random number generator slightly.
+
+c.  Changes to configuration to not put -I/usr/include into $CFLAGS, since
+    it messes up some includes.
+
+d.  Corrected description of POSIXLY_CORRECT in man page and info manual.
+
+e.  Fixed a couple of cases of incorrect function prototypes that sneaked
+    through and caused compilation problems.
+
+f.  A few changes to avoid potential core dumps in the programmable completion
+    code.
+
+g.  Fixed a configure problem that could cause a non-existent file to show
+    up in LIBOBJS.
+
+h.  Fixed a configure problem that could cause siglist.o to not be built when
+    required.
+
+i.  Changes to the strtoimax and strtoumax replacement functions to work
+    around buggy compilers.
+
+j.  Fixed a problem with the snprintf replacement function that could
+    potentially cause a core dump.
+
+2.  Changes to Readline
+
+a.  Fixed a locale-specific problem in the vi-mode `goto mark' command.
+
+b.  Fixed Makefile to not put -I/usr/include into CFLAGS, since it can cause
+    include file problems.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.05a-rc1,
+and the previous version, bash-2.05a-beta1.
+
+1.  Changes to Bash
+
+a.  Fixed the snprintf replacement to correctly implement the `alternate form'
+    of the %g and %G conversions.
+
+b.  Fixed snprintf to correctly handle the optional precision with the %g and
+    %G conversions.
+
+c.  Fixed the arithmetic evaluation code to correct the values of `@' and `_'
+    when translating base-64 constants (they were backwards).
+
+d.  New library functions for formatting long and long long ints.
+
+e.  Fixed a few places where negative array subscripts could have occurred,
+    mostly as the result of systems using signed characters.
+
+f.  Fixed a few places that assumed a pid_t was no wider than an int.
+
+g.  Fixed the `maildir' mail checking code to work on systems where a
+    `struct stat' doesn't include an `st_blocks' member.
+
+h.  Fixed snprintf to make `unsigned long long' conversion formats (%llu)
+    work better.
+
+i.  Fixed snprintf to not print a sign when asked to do an unsigned conversion.
+
+j.  Made configure changes to avoid compiling empty source files in lib/sh.
+
+k.  New replacement functions (if necessary) for strtoull, strtoll, strtoimax,
+    strtoumax.
+
+l.  The `printf' builtin now handles the `ll' and `j' length modifiers
+    directly, since they can affect the type and width of the argument
+    passed to printf(3).
+
+m.  Renamed a number of the bash-specific autoconf macros in aclocal.m4 to
+    have more systematic naming, with accompanying changes to configure.in.
+
+n.  Fixed snprintf to handle long doubles and the %a/%A conversions by
+    falling back to sprintf, as long as sprintf supports them.
+
+o.  Fixed return value from vsnprintf/snprintf to be the number of characters
+    that would have been printed, even if that number exceeds the buffer
+    size passed as an argument.
+
+p.  Bash no longer attempts to define its own versions of some ctype macros
+    if they are implemented as functions in libc but not as macros in
+    <ctype.h>.
+
+q.  Changed the variable printing code (used by `set', `export', etc.) to
+    not use the $'...' syntax when in posix mode, since that caused
+    interoperability problems with other shells (most notably with autoconf).
+    When not in posix mode, it uses $'...' if the string to be printed
+    contains non-printing characters and regular single quotes otherwise.
+
+r.  snprintf now recognizes the %F conversion.
+
+s.  Fixed a bug that could cause the wrong status to be returned by a shell
+    function when the shell is compiled without job control and a null
+    command containing a command substutition was executed in the function.
+
+t.  When in posix mode, the default value for MAILCHECK is 600.
+
+u.  Bash only initializes FUNCNAME, GROUPS, and DIRSTACK as special variables
+    if they're not in the initial environment.
+
+v.  If SECONDS appears in the initial environment with a valid integer value,
+    bash uses that as the starting value, as if an assignment had been
+    performed.
+
+w.  Bash no longer auto-exports HOME, PATH, SHELL, or TERM, even though it
+    gives them default values if they don't appear in the initial environment.
+
+x.  Bash no longer auto-exports HOSTNAME, HOSTTYPE, MACHTYPE, or OSTYPE,
+    even if it assigns them default values.
+
+y.  Bash no longer removes the export attribute from SSH_CLIENT or SSH2_CLIENT
+    if they appear in the initial environment.
+
+z.  Bash no longer attempts to discover if it's being run by sshd in order to
+    run the startup files.  If the SSH_SOURCE_BASHRC is uncommented in
+    config-top.h it will attempt to do so as previously, but that's commented
+    out in the distributed version.
+
+aa. Fixed a typo in the code that tests for LC_NUMERIC.
+
+bb. The POSIXLY_CORRECT shell variable and its effects are now documented.
+
+cc. Some changes to several of the support shell scripts included in the
+    definitions to try to avoid race conditions and attacks.
+
+dd. Several changes to avoid warnings from `gcc -Wall'.
+
+ee. Fixed a problem with the `unset' builtin that could cause incorrect
+    results if asked to unset a variable and an array subscript in the
+    same command.
+
+ff. A few changes to the shell's temporary file creation code to avoid
+    potential file descriptor leaks and to prefer the system's idea of
+    the temporary directory to use.
+
+gg. Fixes to build with the C alloca in lib/malloc/alloca.c if the system
+    requires it but the shell has been configured --without-bash-malloc.
+
+hh. Updated the documentation to note that only interactive shells resend
+    SIGHUP to all jobs before exiting.
+
+ii. Fixes to only pass unquoted tilde words to tilde_expand, rather than
+    rely on tilde_expand or getpwnam(3) to handle the quotes (MacOS 10.x
+    will remove backslashes in any login name passed to getpwnam(3)).
+
+jj. Small change from Paul Eggert to make LINENO right in commands run with
+    `bash -c'.
+
+2.  New Features in Bash
+
+a.  The `printf' builtin now handles the %a and %A conversions if they're
+    implemented by printf(3).
+
+b.  The `printf' builtin now handles the %F conversion (just about like %f).
+
+c.  The `printf' builtin now handles the %n conversion like printf(3).  The
+    corresponding argument is the name of a shell variable to which the
+    value is assigned.
+
+3.  Changes to Readline
+
+a.  Fixed a few places where negative array subscripts could have occurred.
+
+b.  Fixed the vi-mode code to use a better method to determine the bounds of
+    the array used to hold the marks.
+
+c.  Fixed the defines in chardefs.h to work better when chars are signed.
+
+d.  Fixed configure.in to use the new names for bash autoconf macros.
+
+e.  Readline no longer attempts to define its own versions of some ctype
+    macros if they are implemented as functions in libc but not as macros in
+    <ctype.h>.
+
+f.  Fixed a problem where rl_backward could possibly set point to before
+    the beginning of the line.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.05a-beta1,
+and the previous version, bash-2.05a-alpha1.
+
+1.  Changes to Bash
+
+a.  Fixed a bug in the evaluation of arithmetic `for' statements when the
+    expanded expression is NULL.
+
+b.  Fixed an unassigned variable problem in the redirection printing code.
+
+c.  Added more prototypes to extern function declarations in the header
+    files and to static function declarations in C source files.
+
+d.  Make sure called functions have a prototype in scope, to get the arguments
+    and return values right instead of casting.  Removed extern function
+    declarations from C source files that were already included in header
+    files.
+
+e.  Changed some function arguments to use function typedefs in general.h so
+    the prototypes can be checked.  The only use of Function and VFunction
+    now is for unwind-protects.
+
+f.  More const changes to function arguments and appropriate variables.
+
+g.  Changed the mail checking support to handle `maildir'-style mail
+    directories.
+
+h.  Augmented the bash malloc to pass in the file and line number information
+    for each malloc, realloc, and free.  This should result in better error
+    messages.
+
+i.  The `old' gnu malloc is no longer a configuration option.
+
+j.  Augmented the bash malloc with optional tracing and registering allocated
+    and freed memory.
+
+k.  Prompt string decoding now saves and restores the value of $? when it
+    expands the prompt string, so command substitutions don't change $?.
+
+i.  Array indices are now `long', since shell arithmetic is performed as long,
+    and the internal arrayind_t type is used consistently.
+
+j.  Some more `unsigned char *' fixes from Paul Eggert.
+
+k.  Fixed a bad call to builtin_error that could cause core dumps when making
+    local variables.
+
+l.  `return' may no longer be used to terminate a `select' command, for
+    compatibility with ksh.
+
+m.  Changed code that reads octal numbers to do a better job of detecting
+    overflows.
+
+n.  The time formatting code no longer uses absolute indices into a buffer,
+    because the buffer size changes depending on the size of a `time_t'.
+
+o.  `umask' now prints four digits when printing in octal mode, for
+    compatibility with other shells.
+
+p.  Lots of changes to the `printf' builtin from Paul Eggert:  it handles `L'
+    formats and long doubles better, and internal functions have been
+    simplified where appropriate.
+
+q.  Some `time_t' fixes for machines were a time_t is bigger than a long.
+
+r.  Replaced some bash-specific autoconf macros with standard equivalents.
+
+s.  Improvmed the code that constructs temporary filenames to make the
+    generated names a bit more random.
+
+t.  Added code that checks for ascii before calling any of the is* ctype
+    functions.
+
+u.  Changed some places where a `char' was used as an array subscript to use
+    `unsigned char', since a `char' can be negative if it's signed by default.
+
+v.  Lots of changes to the `ulimit' builtin from Paul Eggert to add support
+    for the new POSIX-200x RLIM_SAVED_CUR and RLIM_SAVED_MAX values and
+    simplify the code.
+
+w.  `ulimit' now prints the description of a resource in any error message
+    relating to fetching or setting that resource's limits.
+
+x.  The `snprintf' replacement now computes maximum values at compile
+    time rather than using huge constants for things like long long.
+
+y.  Interactive shells now ignore `set -n'.
+
+z.  Changed the malloc bookkeeping information so that it's now 8 bytes
+    instead of 12 on most 32-bit machines (saving 4 bytes per allocation),
+    restoring 8-byte alignment.
+
+aa. The malloc error reporting code now attempts to print the file and line
+    number of the call that caused the error.
+
+bb. Changed the redirection error reporting code to catch EBADF errors and
+    report the file descriptor number rather than the file being redirected
+    to or from (e.g., things like `exec 4242<x' where 4242 is an out-of-range
+    file descriptor).
+
+cc. `printf', `echo -e', and the $'...' code now process only two hex digits
+    after a `\x' escape sequence for compatibility with other shells, and
+    the documentation was changed to note that the octal and hex escape
+    sequences result in an eight-bit value rather than strict ASCII.
+
+2.  Changes to Readline
+
+a.  The completion code now attempts to do a better job of preserving the
+    case of the word the user typed if ignoring case in completions.
+
+b.  Readline defaults to not echoing the input and lets the terminal
+    initialization code enable echoing if there is a controlling terminal.
+
+c.  The key binding code now processes only two hex digits after a `\x'
+    escape sequence, and the documentation was changed to note that the
+    octal and hex escape sequences result in an eight-bit value rather
+    than strict ASCII.
+
+3.  New Features in Bash
+
+a.  The builtin `ulimit' now takes two new non-numeric arguments:  `hard',
+    meaning the current hard limit, and `soft', meaning the current soft
+    limit, in addition to `unlimited'
+
+b.  `ulimit' now prints the option letter associated with a particular
+    resource when printing more than one limit.
+
+c.  `ulimit' prints `hard' or `soft' when a value is not `unlimited' but is
+    one of RLIM_SAVED_MAX or RLIM_SAVED_CUR, respectively.
+
+4.  New Features in Readline
+
+a.  New bindable variable `history-preserve-point'.  If set, the history
+    code attempts to place the user at the same location on each history
+    line retrieved with previous-history or next-history.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.05a-alpha1,
+and the previous version, bash-2.05-release.
+
+1.  Changes to Bash
+
+a.  Better checks in the redirection code for write errors.
+
+b.  bashbug now uses $TMPDIR, defaulting to /tmp, and uses mktemp(1) more
+    portably.
+
+c.  System-specific configuration changes for:  Interix, OpenBSD, FreeBSD,
+    MacOS X.
+
+d.  Some more `const' cleanups through the code.
+
+e.  Fixed a typo in the /dev/fd redirection code, better checks for valid
+    numeric fds in /dev/fd.
+
+f.  Fixed many parts of the shell to handle integer overflow more gracefully
+    and to do more stringent checks for valid numbers.
+
+g.  Fixed mksignames to include config.h.
+
+h.  Fixed an uninitialized variable problem that could cause the shell to core
+    dump when replacing characters in a string.
+
+i.  New mechanism for updating the patch level when official patches are
+    released (patchlevel.h).
+
+j.  configure.in changed to no longer require external files _distribution and
+    _patchlevel.
+
+k.  Fixed non-interactive shell initialization problem when bash started as
+    `bash -i filename'.
+
+l.  Fixed printf builtin conversion error handling to be POSIX.2-conformant.
+
+m.  autoconf-2.52 is now used to build configure; autoconf-2.50 or newer is
+    required.  Some of the bash-specific macros were removed, since they are
+    now standard.
+
+n.  Startup files and files read with source or `.' are no longer required to
+    be regular files.
+
+o.  Fixed core dump in builtin printf when user-supplied precision or field
+    width is 0.
+
+p.  Fixed builtin printf to treat a negative field width as a positive field
+    width with left-justification.
+
+r.  New unwind-protect implementation from Paul Eggert.
+
+s.  Fixed an inadvertently-unclosed comment in the bash completion code that
+    caused programmable completions to not add trailing slashes or spaces to
+    completions.
+
+t.  Fixed the process substitution code to cope better when stdin is closed.
+
+v.  Fixes, mostly from Paul Eggert, for a few possible buffer overflows in
+    the shell.
+
+w.  Fixes from Paul Eggert to avoid most of the type casts in the shell code,
+    and use more appropriate types for a number of variables.
+
+x.  Command substitution no longer inherits the DEBUG trap.
+
+y.  Some fixes to the process substitution code on machines without /dev/fd so
+    that named pipes are not removed inappropriately.
+
+z.  The loadable `getconf' builtin is now much more complete, and will become
+    part of the shell in the future.
+
+aa. The select command no longer terminates on a `return', so it can be used
+    to return from an enclosing function (as ksh does it).
+
+bb. Fixed the extended pattern matching code to behave better when presented
+    with incorrectly-formed patterns.
+
+cc. Some changes were made with the intent of making cross-compilation easier.
+
+dd. The network code (/dev/tcp and /dev/udp redirections) uses getaddrinfo(3)
+    if it's available, which adds support for IPv6.
+
+ee. Subshells of login shells no longer source ~/.bash_logout when they exit.
+
+ff. Fixes so that subshells don't exit inappropriately if the -e option has
+    been set.
+
+gg. Restricted shells no longer allow functions to be exported.
+
+hh. Changes to the pattern matching code so extended pattern matching works
+    on systems with deficient shared library implementations, like MacOS X.
+
+ii. Better error messages when a script with a leading `#!interp' fails
+    to execute because of problems with `interp'.
+
+jj. Fixed `compgen' to handle the `-o default' option better.
+
+kk. Fixed the job control code to force an asynchronous process's standard
+    input to /dev/null only if job control is not active.
+
+ll. Fixed a possible infinite recursion problem when `fc ""=abc' (a null
+    pattern) is used to re-execute a previous command.
+
+mm. Fixed `declare [-a] var=value' to assign VALUE to element 0 if VAR is an
+    array variable.  Similarly for `declare [-a] var[N]=value'.  This is like
+    ksh93.
+
+nn. Fixed a bug that caused `read -a aname' to work even if ANAME had been
+    declared readonly.
+
+oo. Fixed a possible integer overflow problem when constructing names for
+    temporary files.
+
+2.  New Features in Bash
+
+a.  Added support for DESTDIR installation root prefix, so you can do a
+    `make install DESTDIR=bash-root' and do easier binary packaging.
+
+b.  Added support for builtin printf "'" flag character as per latest POSIX
+    drafts.
+
+c.  Support for POSIX.2 printf(1) length specifiers `j', `t', and `z' (from
+    ISO C99).
+
+d.  New autoconf macro, RL_LIB_READLINE_VERSION, for use by other applications
+    (bash doesn't use very much of what it returns).
+
+e.  `set [-+]o nolog' is recognized as required by the latest POSIX drafts,
+    but ignored.
+
+f.  New read-only `shopt' option:  login_shell.  Set to non-zero value if the
+    shell is a login shell.
+
+g.  New `\A' prompt string escape sequence; expands to time in 24 HH:MM format.
+
+h.  New `-A group/-g' option to complete and compgen; does group name
+    completion.
+
+i.  New `-t' option to `hash' to list hash values for each filename argument.
+
+j.  New [-+]O invocation option to set and unset `shopt' options at startup.
+
+k.  configure's `--with-installed-readline' option now takes an optional
+    `=PATH' suffix to set the root of the tree where readline is installed
+    to PATH.
+
+l.  The ksh-like `ERR' trap has been added.  The `ERR' trap will be run
+    whenever the shell would have exited if the -e option were enabled.
+    It is not inherited by shell functions.
+
+m.  `readonly', `export', and `declare' now print variables which have been
+    given attributes but not set by assigning a value as just a command and
+    a variable name (like `export foo') when listing, as the latest POSIX
+    drafts require.
+
+n.  `bashbug' now requires that the subject be changed from the default.
+
+o.  configure has a new `--enable-largefile' option, like other GNU utilities.
+
+p.  `for' loops now allow empty word lists after `in', like the latest POSIX
+    drafts require.
+
+3.  Changes to Readline
+
+a.  More `const' and type casting fixes.
+
+b.  Changed rl_message() to use vsnprintf(3) (if available) to fix buffer
+    overflow problems.
+
+c.  The completion code no longer appends a `/' or ` ' to a match when
+    completing a symbolic link that resolves to a directory name, unless
+    the match does not add anything to the word being completed.  This
+    means that a tab will complete the word up to the full name, but not
+    add anything, and a subsequent tab will add a slash.
+
+d.  Fixed a trivial typo that made the vi-mode `dT' command not work.
+
+e.  Fixed the tty code so that ^S and ^Q can be inserted with rl_quoted_insert.
+
+f.  Fixed the tty code so that ^V works more than once.
+
+g.  Changed the use of __P((...)) for function prototypes to PARAMS((...))
+    because the use of __P in typedefs conflicted g++ and glibc.
+
+4.  New Features in Readline
+
+a.  Added extern declaration for rl_get_termcap to readline.h, making it a
+    public function (it was always there, just not in readline.h).
+
+b.  New #defines in readline.h:  RL_READLINE_VERSION, currently 0x0402,
+    RL_VERSION_MAJOR, currently 4, and RL_VERSION_MINOR, currently 2.
+
+c.  New readline variable:  rl_readline_version, mirrors RL_READLINE_VERSION.
+
+d.  New bindable boolean readline variable:  match-hidden-files.  Controls
+    completion of files beginning with a `.' (on Unix).  Enabled by default.
+
+e.  The history expansion code now allows any character to terminate a
+    `:first-' modifier, like csh.
+
+f.  The incremental search code remembers the last search string and uses
+    it if ^R^R is typed without a search string.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.05-release,
+and the previous version, bash-2.05-beta2.
+
+1.  Changes to Bash
+
+a.  Make sure we note that the first line of a multi-line command was not
+    saved in the history if the tests for HISTCONTROL succeed, but the
+    HISTIGNORE check fails.
+
+b.  Fixed a bug in the pattern matching code that caused `[' to be treated
+    as a special character inside a `[...]' bracket expression.
+
+c.  Fixed a bug in the pattern matching code that caused `]' to terminate
+    a bracket expression even if it was the first character after the `['
+    (or a leading `!' or `^').
+
+d.  Made a small change to report a more user-friendly error message if
+    execve(2) fails because of an error with the interpreter in a script
+    with a leading `#! interpreter'.
+
+e.  If the OS does not support an exec(2) magic number of `#!', make sure we
+    have a non-null interpreter name before attempting to execute it.
+
+f.  Fixed a bug that caused the shell process to end up in a different
+    process group than the controlling terminal if a job-control shell was
+    run with `exec' in the startup files.
+
+g.  When started in POSIX mode, either by `bash --posix', `bash -o posix', or
+    `sh', $SHELLOPTS includes `posix' and POSIXLY_CORRECT is set.
+
+h.  Fixed a problem that caused the `\W' prompt string escape sequence to
+    expand to nothing when $PWD was `//'.
+
+i.  The `bashbug' shell script no longer uses $(...) command substitution.
+
+j.  When `set' is invoked without options in POSIX mode, it no longer prints
+    the names and definitions of shell functions.
+
+2.  Changes to Readline
+
+a.  rl_set_paren_blink_timeout() is now documented.
+
+b.  Corrected history.3 man page: `$' is not in the default value of
+    history_word_delimiters.
+
+c.  If a hook function assigned to rl_event_hook sets rl_done to a non-zero
+    value, rl_read_key() now immediately returns '\n' (which is assumed to
+    be bound to accept-line).
+
+3.  New Features in Bash
+
+a.  The `>&word' redirection now works in POSIX mode as it does by default,
+    since POSIX.2 leaves it unspecified.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.05-beta2,
+and the previous version, bash-2.05-beta1.
+
+1.  Changes to Bash
+
+a.  Fixed a bug in the arithmetic evaluation code so that a^=b is supported.
+
+b.  Fixed startup so posixly_correct is retained across subshells begun to
+    execute scripts without a leading `#!'.
+
+c.  Fixed a bug that caused $(< file) to not work in a (...) subshell.
+
+d.  Added config support for Linux running on the IBM S390.
+
+e.  Fixed a bug that caused bash to get its input pointer out of sync when
+    reading commands through a pipe and running a command with standard
+    input redirected from a file.
+
+f.  Made a change so that command completion now makes about half as many
+    stat(2) calls when searching the $PATH.
+
+g.  Fixed a bug that caused variable assignments preceding `return' to not
+    be propagated to the shell environment in POSIX mode.
+
+h.  Fixed a bug with ${parameter[:]?word} -- tilde expansion was not performed
+    on `word'.
+
+i.  In POSIX mode, `break' and `continue' do not complain and return success
+    if called when the shell is not executing a loop.
+
+j.  Fixed `bash -o posix' to work the same as `bash --posix'.
+
+k.  Fixed a bug where variable assignments preceding `eval' or `source/.'
+    would not show up in the environment exported to subshells run by the
+    commands.
+
+l.  In POSIX mode, shells started to execute command substitutions inherit
+    the value of the `-e' option from their parent shell.
+
+m.  In POSIX mode, aliases are expanded even in non-interactive shells.
+
+n.  Changed some of the job control messages to display the text required by
+    POSIX.2 when the shell is in POSIX mode.
+
+o.  Fixed a bug in `test' that caused it to occasionally return incorrect
+    results when non-numeric arguments were supplied to `-t'.
+
+2.  Changes to Readline
+
+a.  Some changes were made to avoid gcc warnings with -Wall.
+
+b.  rl_get_keymap_by_name now finds keymaps case-insensitively, so
+    `set keymap EMACS' works.
+
+c.  The history file writing and truncation functions now return a useful
+    status on error.
+
+d.  Fixed a bug that could cause applications to dereference a NULL pointer
+    if a NULL second argument was passed to history_expand().
+
+3.  New Features in Bash
+
+a.  doc/readline.3 has been moved to the readline distribution.
+
+4.  New Features in Readline
+
+a.  New function, rl_get_screen_size (int *rows, int *columns), returns
+    readline's idea of the screen dimensions.
+
+b.  The timeout in rl_gather_tyi (readline keyboard input polling function)
+    is now settable via a function (rl_set_keyboard_input_timeout()).
+
+c.  Renamed the max_input_history variable to history_max_entries; the old
+    variable is maintained for backwards compatibility.
+
+d.  The list of characters that separate words for the history tokenizer is
+    now settable with a variable:  history_word_delimiters.  The default
+    value is as before.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.05-beta1,
+and the previous version, bash-2.05-alpha1.
+
+1.  Changes to Bash
+
+a.  Changes to allow shared library and object building on the GNU Hurd.
+
+b.  Fixes to the way exported functions are placed into the environment and
+    cached.
+
+c.  The globbing library once again respects locales when processing ranges
+    in bracket expressions while doing pattern matching.
+
+d.  System-specific configuration changes for:  Tru 64, Interix
+
+e.  Bashbug now uses /usr/bin/editor as one of the editing alternatives, and
+    will use mktemp(1) or tempfile(1), if present, for temporary file creation.
+
+f.  Bash no longer performs a binary file check on a script argument that's
+    really a tty (like /dev/fd/0 or /dev/stdin).
+
+g.  Fixed a bug in the execution of shell scripts that caused the effects of
+    $BASH_ENV to be undone in some cases.
+
+h.  Fixed several bugs that made `bash [-i] /dev/stdin' not work correctly.
+
+i.  Several changes to the job control code to avoid some signal state
+    manipulation.
+
+j.  The Bash malloc no longer blocks signals as often, which should make it
+    faster.
+
+k.  Fixed a parsing bug that did not allow backslash to escape a single quote
+    inside a $'...' construct.
+
+l.  Fixed a bug that caused things like ${var:=$'value'} to be parsed
+    incorrectly.  This showed up in newer versions of autoconf.
+
+m.  Fixed a bug in the bash-specific readline initialization that caused
+    key bindings to bash-specific function names appearing in .inputrc to
+    not be honored.
+
+n.  Bash now sets the file descriptor it uses to save the file descriptor
+    opened on a shell script to close on exec.
+
+o.  Fixed a bug in the prompt string decoding that caused it to misbehave
+    when presented an octal sequence of fewer than three characters.
+
+p.  Fixed the `test' builtin to return an error if `[' is supplied a single
+    argument that is not `]'.
+
+q.  Fixed a bug that caused subshells started to run executable shell scripts
+    without a leading `#!' to incorrectly inherit an argument list preceding
+    a shell builtin (like such a script called from a script sourced with `.',
+    where there were variable assignments preceding the `.' command)
+
+r.  Fixed a bug that caused changes to variables supplied in an assignment
+    statement preceding a shell builtin to not be honored (like a script
+    run with `.').
+
+s.  HOSTTYPE, OSTYPE, and MACHTYPE are set only if they do not have values
+    when the shell is started.
+
+t.  Fixed a bug that caused SIGINT to kill shell scripts after the script
+    called `wait'.
+
+u.  The `fc' builtin now tries to create its temporary files in the directory
+    named by $TMPDIR.
+
+v.  Bash no longer calls any Readline functions or uses any Readline variables
+    not declared in readline.h.
+
+w.  Fixed a bug that caused some substitutions involving $@ to not be split
+    correctly, especially expansions of the form ${paramterOPword}.
+
+x.  SSH2_CLIENT is now treated like SSH_CLIENT and not auto-exported if it
+    appears in the initial environment.
+
+y.  Fixed a couple of problems with shell scripts without a leading `#!'
+    being executed out of shell functions that could cause core dumps if
+    such a script attempted to execute `return'.
+
+z.  Fixed a problem with the `-nt' and `-ot' binary operators for the
+    `test/[' builtin and the `[[' conditional command that caused wrong
+    return values if one of the file arguments did not exist.
+
+aa. Fixed a bug that caused non-interactive shells which had previously
+    executed `shopt -s expand_aliases' to fail to expand aliases in a
+    command like `(command) &'.
+ 
+2.  Changes to Readline
+
+a.  Changes to make most (but not yet all -- there is still crlf()) of the
+    exported readline functions declared in readline.h have an rl_ prefix.
+
+b.  More `const' changes in function arguments, mostly for completion
+    functions.
+
+c.  Fixed a bug in rl_forward that could cause the point to be set to before
+    the beginning of the line in vi mode.
+
+d.  Fixed a bug in the callback read-char interface to make it work when a
+    readline function pushes some input onto the input stream with
+    rl_execute_next (like the incremental search functions).
+
+e.  Fixed a file descriptor leak in the history file manipulation code that
+    was tripped when attempting to truncate a non-regular file (like
+    /dev/null).
+
+f.  Some existing variables are now documented and part of the public
+    interface (declared in readline.h):  rl_explict_arg, rl_numeric_arg,
+    rl_editing_mode, rl_last_func.
+
+g.  Renamed rltty_set_default_bindings to rl_tty_set_default_bindings and
+    crlf to rl_crlf, so there are no public functions declared in readline.h
+    without an `rl_' prefix.  The old functions still exist for backwards
+    compatibility.
+
+3.  New Features in Bash
+
+a.  A new loadable builtin, realpath, which canonicalizes and expands symlinks
+    in pathname arguments.
+
+b.  When `set' is called without options, it prints function definitions in a
+    way that allows them to be reused as input.  This affects `declare' and
+    `declare -p' as well.
+
+4.  New Features in Readline
+
+a.  New application-callable function rl_set_prompt(const char *prompt):
+    expands its prompt string argument and sets rl_prompt to the result.
+
+b.  New application-callable function rl_set_screen_size(int rows, int cols):
+    public method for applications to set readline's idea of the screen
+    dimensions.
+
+c.  The history example program (examples/histexamp.c) is now built as one
+    of the examples.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.05-alpha1,
+and the previous version, bash-2.04-release.
+
+1.  Changes to Bash
+
+a.  A fix was made to allow newlines in compond array assignments.
+
+b.  configure now checks for real-time signals with unusable values.
+
+c.  Interactive shells no longer exit if a substitution fails because of an
+    unset variable within a sourced file.
+
+d.  Fixed a problem with incorrect matching of extended glob patterns when
+    doing pattern substitution.
+
+e.  `{' is now quoted by the completion code when it appears in a filename.
+
+f.  Fixed an error in pattern matching that caused the matcher to not
+    correctly skip the rest of a bracket expression after a character
+    matched.
+
+g.  Fixed a bug in the IFS word splitting code to make a non-whitespace IFS
+    character preceded by IFS whitespace part of the current delimiter rather
+    than generating a separate field.
+
+h.  The {!prefix@} expansion now generates separate words, analogous to $@,
+    when double-quoted.
+
+i.  Command substitution now ignores NUL bytes in the command output, and the
+    parser ignores them on input.
+
+j.  A fix was made to the job control code to prevent hanging processes when
+    the shell thinks background processes are running but the kernel returns
+    -1/ECHILD from waitpid().
+
+k.  `pwd' now prints an error message if the write fails when displaying the
+    current directory.
+
+l.  When in POSIX mode, the shell prints trap dispostions without a leading
+    `SIG' in the signal specification.
+
+m.  Fixed a parser bug that caused the current command's line count to be
+    messed up by a compound array assignment.
+
+n.  Fixed a bug in the unwind-protect code that caused bad behavior on machines
+    where ints and pointers are not the same size.
+
+o.  System-specific configure changes for:  MacOS X.
+
+p.  Changes for Cygwin to translate \r\n and \r to \n and to set file
+    descriptors used for reading input to text mode in various places.
+
+q.  Fixed a bug that caused `!' to occasionally not be honored when in
+    a (...) subshell.
+
+r.  Bash no longer assumes that getcwd() will return any useful error message
+    in the buffer passed as an argument if the call fails.
+
+s.  The `source', `.', and `fc' builtins no longer check whether a file is
+    binary before reading commands from it.
+
+t.  Subshells no longer turn off job control when they exit, since that
+    sometimes resulted in the terminal being reset to the wrong process
+    group.
+
+u.  The history code no longer tries to save the second and subsequent lines
+    of a multi-line command if the first line was not saved.
+
+v.  The history saving code now does a better job of saving blank lines in a
+    multi-line command.
+
+w.  Removed a `feature' that made `ulimit' silently translate `unlimited' to
+    the current hard limit, which obscured some kernel error returns.
+
+x.  Fixed the grammar so that `}' is recognized as a reserved word after
+    another reserved word, rather than requiring a `;' or newline.  This
+    means that constructs like
+
+	{ { echo a b c ; } }
+
+    work as expected.
+
+y.  Conditional commands ([[...]]) now perform tilde expansion on their
+    arguments.
+
+z.  Noted in the documentation that `set -a' will cause functions to be
+    exported if they are defined after `set -a' is executed.
+
+aa. When an interactive login shell starts, if $PWD and $HOME refer to the
+    same directory but are not the same string, $PWD is set to $HOME.
+
+bb. Fixed `printf' to handle invalid floating point numbers better.
+
+cc. Temporary files are now created with random filenames, to improve security.
+
+dd. The readline initialization code now binds the custom bash functions and
+    key bindings after the readline defaults are set up.
+
+ee. Fixed the `source' builtin to no longer overwrite a shell function's
+    argument list, even if the sourced file changes the positional parameters.
+
+ff. A bug fix was made in the expansion of `$*' in contexts where it should
+    not be split, like assignment statements.
+
+gg. Fixed a bug in the parameter substring expansion to handle conditional
+    arithmetic expressions ( exp ? val1 : val2 ) without cutting the expression
+    off at the wrong `:'.
+
+hh. The `<>' redirection is no longer subject to the current setting of
+    `noclobber', as POSIX.2 specifies.
+
+ii. Fixed a bug in the conditional command parsing code that caused expressions
+    in parentheses to occasionally be parsed incorrectly.
+
+jj. Fixed a bug in the ((...)) arithmetic command to allow do...done or
+    {...} to follow the )) without an intervening list terminator.
+
+kk. `printf' now treats `\E' the same as `\e' when performing backslash escape
+    expansion for the `%b' format specifier.
+
+ll. When in POSIX mode, the shell no longer searches the current directory for
+    a file to be sourced with `.' or `source' if `.' is not in $PATH.
+
+mm. Interactive comments are no longer turned off when POSIX mode is disabled.
+
+nn. The UID, EUID, HOSTNAME variables are not set if they are in the shell's
+    environment when it starts up.
+
+oo. Fixed a bug in the `command' builtin so the effect of a command like
+    `command exec 4<file' is as if the `command' had been omitted.
+
+pp. ${foo[@]} and ${foo[*]} now work as in ksh93 if `foo' is not an array
+    variable.
+
+qq. ${#foo[X]}, where X is 0, @, or *, now work as in ksh93 if `foo' is not
+    an array variable.
+
+rr. The shell's idea of an absolute pathname now takes into account a
+    possible drive specification on Cygwin and other Windows systems.
+
+ss. Fixed a bug which caused incorrect parsing of some multi-character
+    constructs if they were split across input lines with backslash-newline
+    line continuation.
+
+tt. Fixed a bug that caused restricted shell mode to be set inappropriately
+    when trying to execute a shell script without a leading `#!'.
+
+uu. Shell function definitions no longer require that the body be a group
+    command ( {...} ), as POSIX.2 requires.
+
+vv. The `cd' and `pwd' builtins now process symlinks in pathnames internally
+    and should require many fewer calls to getcwd().
+
+ww. Fixed a bug that caused a pipeline's process group to be set incorrectly
+    if one of the pipeline elements contained a command substitution.
+
+xx. Fixed a bug that caused core dumps when expanding the value of HISTIGNORE.
+
+yy. The output of `set' is now quoted using $'...' so invisible characters are
+    displayed as escape sequences.
+
+zz. Fixed the help text for `unset', since PATH and IFS may both be unset.
+
+aaa. The shell no longer puts directory names into the command hash table.
+
+bbb. Fixed a bug in `read' that caused it to occasionally free memory twice if
+     it was interrupted after reading a large amount of data.
+
+ccc. Assignment statements that attempt to assign values to readonly variables
+     now cause the command to return an error status.
+
+ddd. Fixed a bug that could cause incorrect output if a $(<file) construct was
+     interrupted.
+
+eee. GROUPS and FUNCNAME now return an error status when assignment is
+     attempted, but may be unset (in which case they lose their special
+     properties).  In all respects except unsetting, they are readonly.
+
+fff. The string-to-integer conversion code now ignores trailing whitespace in
+     the string, even if strtol(3) does not.
+
+ggg. The tcsh magic-space function now does a better job of inserting the
+     space close to where the point was before the history expansion, rather
+     than just appending it.
+
+hhh. Fixed a bug which caused a file sourced from an interactive shell to
+     fill up the jobs table if it ran lots of jobs.
+
+iii. Fixed a bug in the parameter pattern substitution code to avoid infinite
+     recursion on zero-length matches.
+
+2.  Changes to Readline
+
+a.  When setting the terminal attributes on systems using `struct termio',
+    readline waits for output to drain before changing the attributes.
+
+b.  A fix was made to the history word tokenization code to avoid attempts to
+    dereference a null pointer.
+
+c.  Readline now defaults rl_terminal_name to $TERM if the calling application
+    has left it unset, and tries to initialize with the resultant value.
+
+d.  Instead of calling (*rl_getc_function)() directly to get input in certain
+    places, readline now calls rl_read_key() consistently.
+
+e.  Fixed a bug in the completion code that allowed a backslash to quote a
+    single quote inside a single-quoted string.
+
+f.  rl_prompt is no longer assigned directly from the argument to readline(),
+    but uses memory allocated by readline.  This allows constant strings to
+    be passed to readline without problems arising when the prompt processing
+    code wants to modify the string.
+
+g.  Fixed a bug that caused non-interactive history searches to return the
+    wrong line when performing multiple searches backward for the same string.
+
+h.  Many variables, function arguments, and function return values are now
+    declared `const' where appropriate, to improve behavior when linking with
+    C++ code.
+
+i.  The control character detection code now works better on systems where
+    `char' is unsigned by default.
+
+j.  The vi-mode numeric argument is now capped at 999999, just like emacs mode.
+
+k.  The Function, CPFunction, CPPFunction, and VFunction typedefs have been
+    replaced with a set of specific prototyped typedefs, though they are
+    still in the readline header files for backwards compatibility.
+
+m.  Nearly all of the (undocumented) internal global variables in the library
+    now have an _rl_ prefix -- there were a number that did not, like
+    screenheight, screenwidth, alphabetic, etc.
+
+n.  The ding() convenience function has been renamed to rl_ding(), though the
+    old function is still defined for backwards compatibility.
+
+o.  The completion convenience functions filename_completion_function,
+    username_completion_function, and completion_matches now have an rl_
+    prefix, though the old names are still defined for backwards compatibility.
+
+p.  The functions shared by readline and bash (linkage is satisfied from bash
+    when compiling with bash, and internally otherwise) now have an sh_ prefix.
+
+q.  Changed the shared library creation procedure on Linux and BSD/OS 4.x so
+    that the `soname' contains only the major version number rather than the
+    major and minor numbers.
+
+r.  Fixed a redisplay bug that occurred when the prompt spanned more than one
+    physical line and contained invisible characters.
+
+3.  New Features in Bash
+
+a.  Added a new `--init-file' invocation argument as a synonym for `--rcfile',
+    per the new GNU coding standards.
+
+b.  The /dev/tcp and /dev/udp redirections now accept service names as well as
+    port numbers.
+
+c.  `complete' and `compgen' now take a `-o value' option, which controls some
+    of the aspects of that compspec.  Valid values are:
+
+	default - perform bash default completion if programmable
+		  completion produces no matches
+	dirnames - perform directory name completion if programmable
+		   completion produces no matches
+	filenames - tell readline that the compspec produces filenames,
+		    so it can do things like append slashes to
+		    directory names and suppress trailing spaces
+
+4.  New Features in Readline
+
+a.  The blink timeout for paren matching is now settable by applications.
+
+b.  _rl_executing_macro has been renamed to rl_executing_macro, which means
+    it's now part of the public interface.
+
+c.  Readline has a new variable, rl_readline_state, which is a bitmap that
+    encapsulates the current state of the library; intended for use by
+    callbacks and hook functions.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.04-release,
+and the previous version, bash-2.04-beta5.
+
+1.  Changes to Bash
+
+a.  Better compile-time and configure-time checks for the necessity of
+    inet_aton().
+
+b.  A bug was fixed in the expansion of "${@:-}" when there are positional
+    parameters.
+
+c.  A typo was fixed in the output of `complete'.
+
+d.  The matches generated for a word by the `-W' argument to complete and
+    compgen are now matched against the word being completed, and only
+    matches are returned as the result.
+
+e.  Some fixes were made for systems which do not restart read(2) when a
+    signal caught by bash is received.
+
+f.  A bug was fixed which caused the umask to be set to 0 when an invalid
+    symbolic mode mask was parsed.
+
+g.  Fixed a bug that could cause a core dump if a SIGCHLD was received while
+    performing an assignment statement using command substitution.
+
+h.  Changed the word splitting function for programmable completion so cases
+    in which the cursor is between words are handled a bit better.
+
+2.  Changes to Readline
+
+a.  rl_funmap_names() is now documented.
+
+3.  New Features in Bash
+
+a.  The LC_NUMERIC variable is now treated specially, and used to set the
+    LC_NUMERIC locale category for number formatting, e.g., when `printf'
+    displays floating-point numbers.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.04-beta5,
+and the previous version, bash-2.04-beta4.
+
+1.  Changes to Bash
+
+a.  A couple of changes were made to the Makefiles for easier building on
+    non-Unix systems.
+
+b.  Fixed a bug where the current prompt would be set to $PS2 at startup.
+
+c.  The shell script that tests an already-installed version was changed to
+    remove the directory it created its test programs in at exit.
+
+d.  Several changes were made to the code that tokenizes an input line for
+    the programmable completion code.  Shell metacharacters will now appear
+    as individual words in the word list passed to the completion functions.
+    Some of the example completion shell functions were changed to understand
+    redirection operators.
+
+e.  A bug was fixed that, under obscure circumstances, could confuse the
+    parser when a shell function was run by the programmable completion code.
+
+f.  A bug was fixed in the ulimit builtin for systems not using getrlimit().
+
+g.  The execution code now propagates the correct exit status back to the rest
+    of the code if the return value of a subshell command was being inverted.
+    Some new test cases for inverting return values with the `!' reserved
+    word have been added.
+
+h.  Negative exponents in the arithmetic evaluation of v**e now return an
+    evaluation error.
+
+i.  A bug that caused bash to check the wrong process in a pipeline for
+    abnormal termination (and consequently resetting the terminal attributes)
+    was fixed.
+
+j.  Fixed a bug that caused $PS2 to be displayed after PROMPT_COMMAND was
+    executed.
+
+2.  Changes to Readline
+
+1.  Fixed a bug in a C preprocessor define that caused the keypad control
+    functions to be compiled out for all platforms except DJGPP.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.04-beta4,
+and the previous version, bash-2.04-beta3.
+
+1.  Changes to Bash
+
+a.  A couple of changes were made to the redirection to attempt to avoid
+    race conditions and malicious file replacement.
+
+2.  A change was made to the string evaluation code (used for command 
+    substitution, `eval', and the `.' builtin) to fix an obscure core
+    dump on alpha machines.
+
+3.  A bug that caused $LINENO to be wrong when executing arithmetic for
+    commands was fixed.
+
+4.  A couple of memory leaks in the programmable completion code were fixed.
+
+5.  A bug that could cause a core dump by freeing memory twice during a call
+    to `eval' if `set -u' had been enabled and an undefined variable was
+    referenced was fixed.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.04-beta3,
+and the previous version, bash-2.04-beta2.
+
+1.  Changes to Bash
+
+a.  Bash should run the appropriate startup files when invoked by ssh2.
+
+b.  Fixed a bug in the parsing of conditional commands that could cause a
+    core dump.
+
+c.  Fixed a bug in parsing job specifications that occasionally caused
+    core dumps when an out-of-range job was referenced.
+
+d.  Fixed the `type' and `command' builtins to do better reporting of
+    commands that are not found in $PATH or the hash table.
+
+e.  Fixed a POSIX.2 compliance problem in the command builtin -- commands
+    are supposed to be reported as full pathnames.
+
+f.  The `echo' builtin now returns failure if a write error occurs.
+
+g.  Fixed a bug which caused the locale to not be reset correctly when
+    LC_ALL was unset.
+
+h.  Changed description of `getopts' in man page and reference manual to make
+    it clear that option characters may be characters other than letters.
+
+i.  If the shell exits while in a function, make sure that any trap on EXIT
+    doesn't think the function is still executing.
+
+j.  Bashbug now tries harder to find a usable editor if $EDITOR is not set,
+    rather than simply defaulting to `emacs'.
+
+k.  Changes to the scripts that guess and canonicalize the system type, from
+    the latest `automake' distribution via Debian.
+
+l.  When using named pipes for process substitution, make sure the file
+    descriptors opened for reading are set to non-blocking mode.
+
+m.  Fixed a bug that caused termination of pipelines that are killed by a
+    signal to not be reported in some cases.
+
+n.  When not in literal-history mode, shell comment lines are not added to
+    the history list.
+
+o.  When running in POSIX.2 mode, bash no longer performs word splitting on
+    the expanded value of the word supplied as the filename argument to
+    redirection operators.
+
+p.  The prompt string decoding code now backslash-quotes only characters that
+    are special within double quotes when expanding the \w and \W escape
+    sequences.
+
+q.  Fixed a bug in the prompt decoding code that could cause a non-interactive
+    shell to seg fault if `\u' was used in PS4 and the shell was in xtrace
+    mode.
+
+r.  Fixed a bug that caused function definitions to be printed with any
+    redirections that should be attached to the entire function before the
+    closing brace.
+
+s.  Changed the tilde expansion code for Cygwin systems to avoid creating
+    pathnames beginning with `//' if $HOME == `/'.
+
+t.  Fixed a couple of autoconf tests to avoid creating files with fixed names
+    in /tmp.
+
+u.  The `trap' and `kill' builtins now know the names of the POSIX.1b real-
+    time signals on systems which support them.
+
+2.  Changes to Readline
+
+a.  Fixed a problem with the single-quote quoting function that could cause
+    buffer overflows.
+
+b.  Fixed a bug that caused incorrect `stat characters' to be printed if
+    the files being completed were in the root directory and visible-stats
+    was enabled.
+
+3.  New Features in Bash
+
+a.  There is a new `rbash.1' manual page, from the Debian release.
+
+b.  The `--enable-usg-echo-default' option to `configure' has been renamed to
+    `--enable-xpg-echo-default'.  The old option is still there for backwards
+    compatibility.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.04-beta2,
+and the previous version, bash-2.04-beta1.
+
+1.  Changes to Bash
+
+a.  Fixed a bug that could cause pipes to be closed inappropriately in
+    some obscure cases.
+
+b.  Fixed a bug that caused creation of the exported environment to clobber
+    the current command string if there were any exported shell functions.
+
+c.  Some changes were made to reduce bash's memory usage.
+
+d.  Fixed a problem with programmable completion and filenames to be
+    completed containing quote characters.
+
+e.  Changed the code the removes named pipes created for the <(...) and >(...)
+    expansions to defer removal until after any current shell function has
+    finished executing.
+
+f.  Fixed a bug in `select' which caused it to not handle the `continue'
+    builtin correctly.
+
+g.  Autoconf tests added for cygwin32 and mingw32.
+
+2.  New Features in Bash
+
+a.  The `--with-bash-malloc' configure option replaces `--with-gnu-malloc'
+    (which is still there for backwards compatibility).
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.04-beta1,
+and the previous version, bash-2.04-alpha1.
+
+1.  Changes to Bash
+
+a.  Fixed a bug in the programmable completion code that occurred when
+    trying to complete command lines containing a `;' or `@'.
+
+b.  The file descriptor from which the shell is reading a script is now
+    moved to a file descriptor above the user-addressible range.
+
+c.  Changes to `printf' so that it can handle integers beginning with 0
+    or 0x as octal and hex, respectively.
+
+d.  Fixes to the programmable completion code so it handles nonsense like
+    `compgen -C xyz' gracefully.
+
+e.  The shell no longer modifies the signal handler for SIGPROF, allowing
+    profiling again on certain systems.
+
+f.  The shell checks for a new window size, if the user has requested it,
+    after a process exits due to a signal.
+
+g.  Fixed a bug with variables with null values in a program's temporary
+    environment and the bash getenv() replacement.
+
+h.  `declare' and the other builtins that take variable assignments as
+    arguments now honor `set -a' and mark modified variables for export.
+
+i.  Some changes were made for --dump-po-strings mode when writing strings
+    with embedded newlines.
+
+j.  The code that caches export strings from the initial environment now
+    duplicates the string rather than just pointing into the environment.
+
+k.  The filename completion quoting code now uses single quotes by default
+    if the filename being completed contains newlines, since \<newline>
+    has a special meaning to the parser.
+
+l.  Bash now uses typedefs bits32_t and u_bits32_t instead of int32_t and
+    u_int32_t, respectively to avoid conflicts on certain Unix versions.
+
+m.  Configuration changes were made for: Rhapsody, Mac OS, FreeBSD-3.x.
+
+n.  Fixed a problem with hostname-to-ip-address translation in the
+    /dev/(tcp|udp)/hostname/port redirection code.
+
+o.  The texinfo manual has been reorganized slightly.
+
+p.  Filename generation (globbing) range comparisons in bracket expressions
+    no longer use strcoll(3) even if it is available, since it has unwanted
+    effects in certain locales.
+
+q.  Fixed a cosmetic problem in the source that caused the shell to not
+    compile if DPAREN_ARITHMETIC was not defined but ARITH_FOR_COMMAND was.
+
+r.  Fixed a bug in the here-document code tripped when the file descriptor
+    opened to the file containing the text of the here document was the
+    same as a redirector specified by the user.
+
+s.  Fixed a bug where the INVERT_RETURN flag was not being set for `pipeline'
+    in `time ! pipeline'.
+
+t.  Fixed a bug with the `wait' builtin which manifested itself when an
+    interrupt was received while the shell was waiting for asynchronous
+    processes in a shell script.
+
+u.  Fixed the DEBUG trap code so that it has the correct value of $?.
+
+v.  Fixed a bug in the parameter pattern substitution code that could cause
+    the shell to attempt to free unallocated memory if the pattern started
+    with `/' and an expansion error occurs.
+
+w.  Fixed a bug in the positional parameter substring code that could
+    cause the shell to loop freeing freed memory.
+
+x.  Fixed a bug in the positional parameter pattern substitution code so
+    that it correctly handles null replacement strings with a pattern
+    string prefixed with `%' or `#'.
+
+y.  The shell no longer attempts to import functions from the environment if
+    started with `-n'.
+
+z.  Fixed a bug that caused `return' in a command substitution executed in
+    a shell function to return from the function in a subshell and continue
+    execution.
+
+aa. `hash -p /pathname/with/slashes name' is no longer allowed when the shell
+    is restricted.
+
+bb. The wait* job control functions now behave better if called when there
+    are no unwaited-for children.
+
+cc. Command substitution no longer unconditionally disables job control in
+    the subshell started to run the command.
+
+dd. A bug was fixed that occasionally caused traps to mess up the parser
+    state.
+
+ee. `bashbug' now honors user headers in the mail message it sends.
+
+ff. A bug was fixed that caused the `:p' history modifier to not print the
+    history expansion if the `histverify' option was set.
+
+2.  Changes to Readline
+
+a.  Fixed a bug in the redisplay code for lines with more than 256 line
+    breaks.
+
+b.  A bug was fixed which caused invisible character markers to not be
+    stripped from the prompt string if the terminal was in no-echo mode.
+
+c.  Readline no longer tries to get the variables it needs for redisplay
+    from the termcap entry if the calling application has specified its
+    own redisplay function.  Readline treats the terminal as `dumb' in
+    this case.
+
+d.  Fixes to the SIGWINCH code so that a multiple-line prompt with escape
+    sequences is redrawn correctly.
+
+3.  New Features in Bash
+
+a.  `bashbug' now accepts `--help' and `--version' options.
+
+b.  There is a new `xpg_echo' option to `shopt' that controls the behavior
+    of echo with respect to backslash-escaped characters at runtime.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.04-alpha1,
+and the previous version, bash-2.04-devel.
+
+1.  Changes to Bash
+
+a.  Fixed a bug that could cause core dumps when performing substring
+    expansion.
+
+b.  Shared object configuration changes for:  Solaris, OSF/1
+
+c.  The POSIX_GLOB_LIBRARY code that uses the POSIX.2 globbing facilities
+    for pathname expansion now understands GLOBIGNORE.
+
+d.  The code that implements `eval' was changed to save the value of the
+    current prompt, so an eval in a shell function called by the programmable
+    completion code will not change the prompt to $PS2.
+
+e.  Restored the undocumented NON_INTERACTIVE_LOGIN_SHELLS #define to
+    config-top.h.  If this is defined, all login shells will read the
+    startup files, not just interactive and non-interactive started with
+    the `--login' option.
+
+f.  Fixed a bug that caused the expansion code to occasionally dump core if
+    IFS contained characters > 128.
+
+g.  Fixed a problem with the grammar so that a newline is not required
+    after the `))' in the new-style arithmetic for statement; a semicolon
+    may be used as expected.
+
+h.  Variable indirection may now reference the shell's special variables.
+
+i.  The $'...' and $"..." constructs are now added to the history correctly
+    if they contain newlines and command-oriented history is enabled.
+
+j.  It is now an error to try to assign a value to a function-local copy
+    of a readonly shell variable (declared with the `local' builtin).
+
+2.  Changes to Readline
+
+a.  The history file code now uses O_BINARY mode when reading and writing
+    the history file on cygwin32.
+
+3.  New Features in Bash
+
+a.  A new programmable completion facility, with two new builtin commands:
+    complete and compgen.
+
+b.  configure has a new option, `--enable-progcomp', to compile in the
+    programmable completion features (enabled by default).
+
+c.  `shopt' has a new option, `progcomp', to enable and disable programmable
+    completion at runtime.
+
+d.  Unsetting HOSTFILE now clears the list of hostnames used for completion.
+
+4.  New Features in Readline
+
+a.  A new variable, rl_gnu_readline_p, always 1.  The intent is that an
+    application can verify whether or not it is linked with the `real'
+    readline library or some substitute.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.04-devel,
+and the previous version, bash-2.03-release.
+
+1.  Changes to Bash
+
+a.  System-specific configuration and source changes for:  Interix, Rhapsody
+
+b.  Fixed a bug in execute_cmd.c that resulted in a compile-time error if
+    JOB_CONTROL was not defined.
+
+c.  An obscure race condition in the trap code was fixed.
+
+d.  The string resulting from $'...' is now requoted to avoid any further
+    expansion.
+
+e.  The $'...' quoting syntax now allows backslash to escape a single quote,
+    for ksh-93 compatibility.
+
+f.  The $"..." quoting syntax now escapes backslashes and double quotes in
+    the translated string when displaying them with the --dump-po-strings
+    option.
+
+g.  `echo -e' no longer converts \' to '.
+
+h.  Fixes were made to the extended globbing code to handle embedded (...)
+    patterns better.
+
+i.  Some improvements were made to the code that unsets `nodelay' mode on
+    the file descriptor from which bash is reading input.
+
+j.  Some changes were made to the replacement termcap library for better
+    operation on MS-DOS.
+
+k.  Some changes were made to the tilde expansion code to handle backslash
+    as a pathname separator on MS-DOS.
+
+l.  The source has been reorganized a little bit -- there is now an `include'
+    subdirectory, and lib/posixheaders has been removed.
+
+m.  Improvements were made to the `read' builtin so that it makes many
+    fewer read(2) system calls.
+
+n.  The expansion of $- will include `c' and `s' when those options are
+    supplied at shell invocation.
+
+o.  Several improvements were made to the completion code:  variable completion
+    now works better when there are unterminated expansions, command
+    completion understands quotes better, and completion now works in certain
+    unclosed $(... constructs.
+
+p.  The arithmetic expansion code was fixed to not need the value of a
+    variable being assigned a value (fixes the "ss=09; let ss=10" bug).
+
+q.  Some changes were made to make exported environment creation faster.
+
+r.  The html documentation will be installed into $(htmldir) if that variable
+    has a value when `make install' is run.
+
+s.  Fixed a bug that would cause the bashrc file to be sourced inappropriately
+    when bash is started by sshd.
+
+t.  The SSH_CLIENT environment variable is no longer auto-exported.
+
+u.  A bug that caused redirections with (...) subshells to be performed in
+    the wrong order was fixed.
+
+v.  A bug that occasionally caused inappropriate expansion of assignment
+    statements in compound array assignments was fixed.
+
+w.  The code that parses the words in a compound array assignment was
+    simplified considerably and should work better now.
+
+x.  Fixes to the non-job-control code in nojobs.c to make it POSIX.2-compliant
+    when a user attempts to retrieve the status of a terminated background
+    process.
+
+y.  Fixes to the `printf' builtin so that it doesn't try to expand all
+    backslash escape sequences in the format string before parsing it for
+    % format specifiers.
+
+2.  Changes to Readline
+
+a.  The history library tries to truncate the history file only if it is a
+    regular file.
+
+b.  A bug that caused _rl_dispatch to address negative array indices on
+    systems with signed chars was fixed.
+
+c.  rl-yank-nth-arg now leaves the history position the same as when it was
+    called.
+
+d.  Changes to the completion code to handle MS-DOS drive-letter:pathname
+    filenames.
+
+e.  Completion is now case-insensitive by default on MS-DOS.
+
+f.  Fixes to the history file manipulation code for MS-DOS.
+
+g.  Readline attempts to bind the arrow keys to appropriate defaults on MS-DOS.
+
+h.  Some fixes were made to the redisplay code for better operation on MS-DOS.
+
+i.  The quoted-insert code will now insert tty special chars like ^C.
+
+j.  A bug was fixed that caused the display code to reference memory before
+    the start of the prompt string.
+
+k.  More support for __EMX__ (OS/2).
+
+l.  A bug was fixed in readline's signal handling that could cause infinite
+    recursion in signal handlers.
+
+m.  A bug was fixed that caused the point to be less than zero when rl_forward
+    was given a very large numeric argument.
+
+n.  The vi-mode code now gets characters via the application-settable value
+    of rl_getc_function rather than calling rl_getc directly.
+
+3.  New Features in Bash
+
+a.  The history builtin has a `-d offset' option to delete the history entry
+    at position `offset'.
+
+b.  The prompt expansion code has two new escape sequences: \j, the number of
+    active jobs; and \l, the basename of the shell's tty device name.
+
+c.  The `bind' builtin has a new `-x' option to bind key sequences to shell
+    commands.
+
+d.  There is a new shell option, no_empty_command_completion, which, when
+    enabled, disables command completion when TAB is typed on an empty line.
+
+e.  The `help' builtin has a `-s' option to just print a builtin's usage
+    synopsis.
+
+f.  There are several new arithmetic operators:  id++, id-- (variable
+    post-increment/decrement), ++id, --id (variabl pre-increment/decrement),
+    expr1 , expr2 (comma operator).
+
+g.  There is a new ksh-93 style arithmetic for command:
+	for ((expr1 ; expr2; expr3 )); do list; done
+
+h.  The `read' builtin has a number of new options:
+	-t timeout	only wait timeout seconds for input
+	-n nchars	only read nchars from input instead of a full line
+	-d delim	read until delim rather than newline
+	-s		don't echo input chars as they are read
+
+i.  The redirection code now handles several filenames specially:
+    /dev/fd/N, /dev/stdin, /dev/stdout, and /dev/stderr, whether or
+    not they are present in the file system.
+
+j.  The redirection code now recognizes pathnames of the form
+    /dev/tcp/host/port and /dev/udp/host/port, and tries to open a socket
+    of the appropriate type to the specified port on the specified host.
+
+k.  The ksh-93 ${!prefix*} expansion, which expands to the names of all
+    shell variables whose names start with prefix, has been implemented.
+
+l.  There is a new dynamic variable, FUNCNAME, which expands to the name of
+    a currently-executing function.  Assignments to FUNCNAME have no effect.
+
+m.  The GROUPS variable is no longer readonly; assignments to it are silently
+    discarded.  This means it can be unset.
+
+4.  New Features in Readline
+
+a.  Parentheses matching is now always compiled into readline, and enabled
+    or disabled when the value of the `blink-matching-paren' variable is
+    changed.
+
+b.  MS-DOS systems now use ~/_inputrc as the last-ditch inputrc filename.
+
+c.  MS-DOS systems now use ~/_history as the default history file.
+
+d.  history-search-{forward,backward} now leave the point at the end of the
+    line when the string to search for is empty, like
+    {reverse,forward}-search-history.
+
+e.  history-search-{forward,backward} now leave the last history line found
+    in the readline buffer if the second or subsequent search fails.
+
+f.  New function for use by applications:  rl_on_new_line_with_prompt, used
+    when an application displays the prompt itself before calling readline().
+
+g.  New variable for use by applications:  rl_already_prompted.  An application
+    that displays the prompt itself before calling readline() must set this to
+    a non-zero value.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.03-release,
+and the previous version, bash-2.03-beta2.
+
+1.  Changes to Bash
+
+a.  A file descriptor leak in the `fc' builtin was fixed.
+
+b.  A bug was fixed in the `read' builtin that caused occasional spurious
+    failures when using `read -e'.
+
+c.  The version code needed to use the value of the cpp variable
+    CONF_MACHTYPE rather than MACHTYPE.
+
+d.  A new test was added to exercise the command printing and copying code.
+
+e.  A bug was fixed that caused `time' to be recognized as a reserved word
+    if it was the first pattern in a `case' statement pattern list.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.03-beta2,
+and the previous version, bash-2.03-beta1.
+
+1.  Changes to Bash
+
+a.  Slight additions to support/shobj-conf, mostly for the benefit of AIX 4.2.
+
+b.  config.{guess,sub} support added for the NEC SX4.
+
+c.  Changed some of the cross-compiling sections of the configure macros in
+    aclocal.m4 so that configure won't abort.
+
+d.  Slight changes to how the HTML versions of the bash and readline manuals
+    are generated.
+
+e.  Fixed conditional command printing to avoid interpreting printf `%'-escapes
+    in arguments to [[.
+
+f.  Don't include the bash malloc on all variants of the alpha processor.
+
+g.  Changes to configure to make --enable-profiling work on Solaris 2.x.
+
+h.  Fixed a bug that manifested itself when shell functions were called
+    between calls to `getopts'.
+
+i.  Fixed pattern substitution so that a bare `#'as a pattern causes the
+    replacement string to be prefixed to the search string, and a bare
+    `%' causes the replacement string to be appended to the search string.
+
+j.  Fixed a bug in the command execution code that caused child processes
+    to occasionally have the wrong value for $!.
+
+2.  Changes to Readline
+
+a.  Added code to the history library to catch history substitutions using
+    `&' without a previous history substitution or search having been
+    performed.
+
+3.  New Features in Bash
+
+4.  New Features in Readline
+
+a.  New bindable variable: `isearch-terminators'.
+
+b.  New bindable function: `forward-backward-delete-char' (unbound by default).
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.03-beta1,
+and the previous version, bash-2.03-alpha.
+    
+1.  Changes to Bash
+
+a.  A change was made to the help text for `{...}' to make it clear that a
+    semicolon is required before the closing brace.
+
+b.  A fix was made to the `test' builtin so that syntax errors cause test
+    to return an exit status > 1.
+
+c.  Globbing is no longer performed on assignment statements that appear as
+    arguments to `assignment builtins' such as `export'.
+
+d.  System-specific configuration changes were made for:  Rhapsody,
+    AIX 4.2/gcc, BSD/OS 4.0.
+
+e.  New loadable builtins: ln, unlink.
+
+f.  Some fixes were made to the globbing code to handle extended glob patterns
+    which immediately follow a `*'.
+
+g.  A fix was made to the command printing code to ensure that redirections
+    following compound commands have a space separating them from the rest
+    of the command.
+
+h.  The pathname canonicalization code was changed to produce fewer leading
+    `//' sequences, since those are interpreted as network file system
+    pathnames on some systems.
+
+i.  A fix was made so that loops containing `eval' commands in commands passed
+    to `bash -c' would not exit prematurely.
+
+j.  Some changes were made to the job reaping code when the shell is not
+    interactive, so the shell will retain exit statuses longer for examination
+    by `wait'.
+
+k.  A fix was made so that `jobs | command' works again.
+
+l.  The erroneous compound array assignment var=((...)) is now a syntax error.
+
+m.  A change was made to the dynamic loading code in `enable' to support
+    Tenon's MachTen.
+
+n.  A fix was made to the globbing code so that extended globbing patterns
+    will correctly match `.' in a bracket expression.
+
+2.  Changes to Readline
+
+a.  A fix was made to the completion code in which a typo caused the wrong
+    value to be passed to the function that computed the longest common
+    prefix of the list of matches.
+
+b.  The completion code now checks the value of rl_filename_completion_desired,
+    which is set by application-supplied completion functions to indicate
+    that filename completion is being performed, to decide whether or not to
+    call an application-supplied `ignore completions' function.
+
+3.  New Features in Bash
+
+a.  A change was made to the startup file code so that any shell begun with
+    the `--login' option, even non-interactive shells, will source the login
+    shell startup files.
+
+4.  New Features in Readline
+
+a.  A new variable, rl_erase_empty_line, which, if set by an application using
+    readline, will cause readline to erase, prompt and all, lines on which the
+    only thing typed was a newline.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.03-alpha,
+and the previous version, bash-2.02.1-release.
+
+1.  Changes to Bash
+
+a.  System-specific configuration changes were made for: Irix 6.x, Unixware 7.
+
+b.  The texi2dvi and texi2html scripts were updated to the latest versions
+    from the net.
+
+c.  The configure tests that determine which native type is 32 bits were
+    changed to not require a compiled program.
+
+d.  Fixed a bug in shell_execve that could cause memory to be freed twice
+    after a failed exec.
+
+e.  The `printf' test uses `diff -a' if it's available to prevent confusion
+    due to the non-ascii output.
+
+f.  Shared object configuration is now performed by a shell script,
+    support/shobj-conf, which generates values to be substituted into
+    makefiles by configure.
+
+g.  Some changes were made to `ulimit' to avoid the use of RLIM_INVALID as a
+    return value.
+
+h.  Changes were made to `ulimit' to work around HPUX 9.x's peculiar
+    handling of RLIMIT_FILESIZE.
+
+i.  Some new loadable builtins were added: id, printenv, sync, whoami, push,
+    mkdir.  `pushd', `popd', and `dirs' can now be built as regular or
+    loadable builtins from the same source file.
+
+j.  Changes were made to `printf' to handle NUL bytes in the expanded format
+    string.
+
+k.  The various `make clean' Makefile targets now descend into lib/sh.
+
+l.  The `type' builtin was changed to use the internal `getopt' so that things
+    like `type -ap' work as expected.
+
+m.  There is a new configuration option, --with-installed-readline, to link
+    bash with a locally-installed version of readline.  Only readline version
+    4.0 and later releases can support this.  Shared and static libraries
+    are supported.  The installed include files are used.
+
+n.  There is a new autoconf macro used to find which basic type is 64 bits.
+
+o.  Dynamic linking and loadable builtins should now work on SCO 3.2v5*,
+    AIX 4.2 with gcc, Unixware 7, and many other systems using gcc, where
+    the `-shared' options works correctly.
+
+p.  A bug was fixed in the bash filename completion code that caused memory to
+    be freed twice if a directory name containing an unset variable was
+    completed and the -u option was set.
+
+q.  The prompt expansion code now quotes the `$' in the `\$' expansion so it
+    is not processed by subsequent parameter expansion.
+
+r.  Fixed a parsing bug that caused a single or double quote after a `$$' to
+    trigger ANSI C expansion or locale translation.
+
+s.  Fixed a bug in the globbing code that caused quoted filenames containing
+    no globbing characters to sometimes be incorrectly expanded.
+
+t.  Changes to the default prompt strings if prompt string decoding is not
+    compiled into the shell.
+
+u.  Added `do', `then', `else', `{', and `(' to the list of keywords that may
+    precede the `time' reserved word.
+
+v.  The shell may now be cross-built for BeOS as well as cygwin32.
+
+w.  The conditional command execution code now treats `=' the same as `=='
+    for deciding when to perform pattern matching.
+
+x.  The `-e' option no longer causes the shell to exit if a command exits
+    with a non-zero status while running the startup files.
+
+y.  The `printf' builtin no longer dumps core if a modifier is supplied in
+    the format string without a conversion character (e.g. `%h').
+
+z.  Array assignments of the form a=(...) no longer show up in the history
+    list.
+
+aa. The parser was fixed to obey the POSIX.2 rules for finding the closing
+    `}' in a ${...} expression.
+
+bb. The history file is now opened with mode 0600 rather than 0666, so bash
+    no longer relies on the user's umask being set appropriately.
+
+cc. Setting LANG no longer causes LC_ALL to be assigned a value; bash now
+    relies on proper behavior from the C library.
+
+dd. Minor changes were made to allow quoted variable expansions using
+    ${...} to be completed correctly if there is no closing `"'.
+
+ee. Changes were made to builtins/Makefile.in so that configuring the shell
+    with `--enable-profiling' works right and builtins/mkbuiltins is
+    generated.
+
+2.  Changes to Readline
+
+a.  The version number is now 4.0.
+
+b.  There is no longer any #ifdef SHELL code in the source files.
+
+c.  Some changes were made to the key binding code to fix memory leaks and
+    better support Win32 systems.
+
+d.  Fixed a silly typo in the paren matching code -- it's microseconds, not
+    milliseconds.
+
+e.  The readline library should be compilable by C++ compilers.
+
+f.  The readline.h public header file now includes function prototypes for
+    all readline functions, and some changes were made to fix errors in the
+    source files uncovered by the use of prototypes.
+
+g.  The maximum numeric argument is now clamped at 1000000.
+
+h.  Fixes to rl_yank_last_arg to make it behave better.
+
+i.  Fixed a bug in the display code that caused core dumps if the prompt
+    string length exceeded 1024 characters.
+
+j.  The menu completion code was fixed to properly insert a single completion
+    if there is only one match.
+
+k.  A bug was fixed that caused the display code to improperly display tabs
+    after newlines.
+
+3.  New Features in Bash
+
+a.  New `shopt' option, `restricted_shell', indicating whether or not the
+    shell was started in restricted mode, for use in startup files.
+
+b.  Filename generation is now performed on the words between ( and ) in
+    array assignments (which it probably should have done all along).
+
+c.  OLDPWD is now auto-exported, as POSIX.2 seems to require.
+
+d.  ENV and BASH_ENV are read-only variables in a restricted shell.
+
+4.  New Features in Readline
+
+a.  Many changes to the signal handling:
+	o Readline now catches SIGQUIT and cleans up the tty before returning;
+	o A new variable, rl_catch_signals, is available to application writers 
+	  to indicate to readline whether or not it should install its own
+	  signal handlers for SIGINT, SIGTERM, SIGQUIT, SIGALRM, SIGTSTP,
+	  SIGTTIN, and SIGTTOU;
+	o A new variable, rl_catch_sigwinch, is available to application
+	  writers to indicate to readline whether or not it should install its
+	  own signal handler for SIGWINCH, which will chain to the calling
+	  applications's SIGWINCH handler, if one is installed;
+	o There is a new function, rl_free_line_state, for application signal
+	  handlers to call to free up the state associated with the current
+	  line after receiving a signal;
+	o There is a new function, rl_cleanup_after_signal, to clean up the
+	  display and terminal state after receiving a signal;
+	o There is a new function, rl_reset_after_signal, to reinitialize the
+	  terminal and display state after an application signal handler
+	  returns and readline continues
+
+b.  There is a new function, rl_resize_terminal, to reset readline's idea of
+    the screen size after a SIGWINCH.
+
+c.  New public functions: rl_save_prompt and rl_restore_prompt.  These were
+    previously private functions with a `_' prefix.
+
+d.  New function hook: rl_pre_input_hook, called just before readline starts
+    reading input, after initialization.
+
+e.  New function hook: rl_display_matches_hook, called when readline would
+    display the list of completion matches.  The new function
+    rl_display_match_list is what readline uses internally, and is available
+    for use by application functions called via this hook.
+
+f.  New bindable function, delete-char-or-list, like tcsh.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.02.1-release,
+and the previous version, bash-2.02-release.
+
+1.  Changes to Bash
+
+a.  A bug that caused the bash readline support to not compile unless aliases
+    and csh-style history were configured into the shell was fixed.
+
+b.  Fixed a bug that could cause a core dump when here documents contained
+    more than 1000 characters.
+
+c.  Fixed a bug that caused a CDPATH entry of "" to not be treated the same
+    as the current directory when in POSIX mode.
+
+d.  Fixed an alignment problem with the memory returned by the bash malloc,
+    so returned memory is now 64-bit aligned.
+
+e.  Fixed a bug that caused command substitutions executed within pipelines
+    to put the terminal in the wrong process group.
+
+f.  Fixes to support/config.sub for: alphas, SCO Open Server and Open Desktop,
+    Unixware 2, and Unixware 7.
+
+g.  Fixes to the pattern matching code to make it work correctly for eight-bit
+    characters.
+
+h.  Fixed a problem that occasionally caused the shell to display the wrong
+    value for the new working directory when changing to a directory found
+    in $CDPATH when in physical mode.
+
+i.  Fixed a bug that caused core dumps when using conditional commands in
+    shell functions.
+
+j.  Fixed a bug that caused the printf builtin to loop forever if the format
+    string did not consume any of the arguments.
+
+k.  Fixed a bug in the parameter expansion code that caused "$@" to be
+    incorrectly split if $IFS did not contain a space character.
+
+l.  Fixed a bug that could cause a core dump when completing hostnames if
+    the number of matching hostnames was an exact multiple of 16.
+
+m.  Fixed a bug that caused the shell to fork too early when a command
+    such as `%2 &' was given.
+
+2.  Changes to Readline
+
+a.  Fixed a problem with redisplay that showed up when the prompt string was
+    longer than the screen width and the prompt contained invisible characters.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.02-release,
+and the previous version, bash-2.02-beta2.
+
+1.  Changes to Bash
+
+a.  A bug was fixed that caused the terminal process group to be set
+    incorrectly when performing command substitution of builtins in a
+    pipeline.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.02-beta2,
+and the previous version, bash-2.02-beta1.
+
+1.  Changes to Bash
+
+a.  Attempting to `wait' for stopped jobs now generates a warning message.
+
+b.  Pipelines which exit due to SIGPIPE in non-interactive shells are now
+    not reported if the shell is compiled -DDONT_REPORT_SIGPIPE.
+
+c.  Some changes were made to builtins/psize.sh and support/bashbug.sh to
+    attempt to avoid some /tmp file races and surreptitious file
+    substitutions.
+
+d.  Fixed a bug that caused the shell not to compile if configured with
+    dparen arithmetic but without aliases.
+
+e.  Fixed a bug that caused the input stream to be switched when assigning
+    empty arrays with `bash -c'.
+
+f.  A bug was fixed in the readline expansion glue code that caused bash to
+    dump core when expanding lines with an unclosed single quote.
+
+g.  A fix was made to the `cd' builtin so that using a non-empty directory
+    from $CDPATH results in an absolute pathname of the new current working
+    directory to be displayed after the current directory is changed.
+
+h.  Fixed a bug in the variable assignment code that caused the shell to
+    dump core when referencing an unset variable with `set -u' enabled in
+    an assignment statement preceding a command.
+
+i.  Fixed a bug in the exit trap code that caused reserved words to not be
+    recognized under certain circumstances.
+
+j.  Fixed a bug in the parameter pattern substitution code so that quote
+    removal is performed.
+
+k.  The shell should now configure correctly on Apple Rhapsody systems.
+
+l.  The `kill' builtin now prints a usage message if it is not passed any
+    arguments.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.02-beta1,
+and the previous version, bash-2.02-alpha1.
+
+1.  Changes to Bash
+
+a.  A few compilation bugs were fixed in the new extended globbing code.
+
+b.  Executing arithmetic commands now sets the command name to `((' so
+    error messages look right.
+
+c.  Fixed some build problems with various configuration options.
+
+d.  The `printf' builtin now aborts immediately if an illegal format
+    character is encountered.
+
+e.  The code that creates here-documents now behaves better if the file it's
+    trying to create already exists for some reason.
+
+f.  Fixed a problem with the extended globbing code that made patterns like
+    `x+*' expand incorrectly.
+
+g.  The prompt string expansion code no longer quotes tildes with backslashes.
+
+h.  The bash getcwd() implementation in lib/sh/getcwd.c now behaves better in
+    the presence of lstat(2) failures.
+
+i.  Fixed a bug with strsub() that caused core dumps when executing `fc -s'.
+
+j.  The mail checking code now ensures that it has a valid default mailpath.
+
+k.  A bug was fixed that caused local variables to be unset inappropriately
+    when sourcing a script from within another sourced script.
+
+l.  A bug was fixed in the history saving code so that functions are saved
+    in the history list correctly if `cmdhist' is enabled, but `lithist'
+    is not.
+
+m.  A bug was fixed that caused printf overflows when displaying error
+    messages.
+
+n.  It should be easier to build the loadble builtins in examples/loadables,
+    though some manual editing of the generated Makefile is still required.
+
+o.  The user's primary group is now always ${GROUPS[0]}.
+
+p.  Some updates were made to support/config.guess from the GNU master copy.
+
+q.  Some changes were made to the autoconf support for Solaris 2.6 large
+    files.
+
+r.  The `command' builtins now does the right thing when confstr(3) cannot
+    find a value for _CS_PATH.
+
+s.  Extended globbing expressions like `*.!(c)' are not history expanded if
+    `extglob' is enabled.
+
+t.  Using the `-P' option to `cd' will force the value that is assigned to
+    PWD to not contain any symbolic links.
+
+2.  Changes to Readline
+
+a.  The code that prints completion listings now behaves better if one or
+    more of the filenames contains non-printable characters.
+
+b.  The time delay when showing matching parentheses is now 0.5 seconds.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.02-alpha1,
+and the previous version, bash-2.01.1-release.
+
+1.  Changes to Bash
+
+a.  OS-specific configuration changes for:  BSD/OS 3.x, Minix 2.x,
+    Solaris 2.6, SINIX SVR4.
+
+b.  Changes were made to the generated `info' files so that `install-info'
+    works correctly.
+
+c.  PWD is now auto-exported.
+
+d.  A fix was made to the pipeline code to make sure that the shell forks
+    to execute simple commands consisting solely of assignment statements.
+
+e.  Changes to the test suite for systems with 14-character filenames.
+
+f.  The default sizes of some internal hash tables have been made smaller
+    to reduce the shell's memory footprint.
+
+g.  The `((...))' arithmetic command is now executed directly instead of
+    being translated into `let "..."'.
+
+h.  Fixes were made to the expansion code so that "$*", "$@", "${array[@]}",
+    and "${array[@]}" expand correctly when IFS does not contain a space
+    character, is unset, or is set to NULL.
+
+i.  The indirect expansion code (${!var}) was changed so that the only
+    valid values of `var' are variable names, positional parameters, `#',
+    `@', and `*'.
+
+j.  An arithmetic expression error in a $((...)) expansion now causes a
+    non-interactive shell running in posix mode to exit.
+
+k.  Compound array assignment now splits the words within the parentheses
+    on shell metacharacters like the parser would before expansing them
+    and performing the assignment.  This is for compatibility with ksh-93.
+
+l.  The internal shell backslash-quoting code (used in the output of `set'
+    and completion) now quotes tildes if they appear at the start of the
+    string or after a `=' or `:'.
+
+m.  A couple of bugs with `shopt -o' were fixed.
+
+n.  `bash +o' now displays the same output as `set +o' before starting an
+    interactive shell.
+
+o.  A bug that caused command substitution and the `eval' builtin to
+    occasionally free memory twice when an error was encountered was fixed.
+
+p.  The filename globbing code no longer requires read permission for a
+    directory when the filename to be matched does not contain any globbing
+    characters, as POSIX.2 specifies.
+
+q.  A bug was fixed so that the job containing the last asynchronous
+    process is not removed from the job table until a `wait' is executed
+    for that process or another asynchronous process is started.  This
+    satisfies a POSIX.2 requirement.
+
+r.  A `select' bug was fixed so that a non-numeric user response is treated
+    the same as a numeric response that is out of range.
+
+s.  The shell no longer parses the value of SHELLOPTS from the environment
+    if it is restricted, running setuid, or running in `privileged mode'.
+
+t.  Fixes were made to enable large file support on systems such as
+    Solaris 2.6, where the size of a file may be larger than can be held
+    in an `int'.
+
+u.  The filename hashing code was fixed to not add `./' to the beginning of
+    filenames which already begin with `./'.
+
+v.  The configure script was changed so that the GNU termcap library is not
+    compiled in if `prefer-curses' has been specified.
+
+w.  HISTCONTROL and HISTIGNORE are no longer applied to the second and
+    subsequent lines of a multi-line command.
+
+x.  A fix was made to `disown' so that it does a better job of catching
+    out-of-range jobs.
+
+y.  Non-interactive shells no longer report the status of processes terminated
+    due to SIGINT, even if the standard output is a terminal.
+
+z.  A bug that caused the output of `jobs' to have extra carriage returns
+    was fixed.
+
+aa. A bug that caused PIPESTATUS to not be set when builtins or shell
+    functions were executed in the foreground was fixed.
+
+bb. Bash now attempts to detect when it is being run by sshd, and treats
+    that case identically to being run by rshd.
+
+cc. A bug that caused `set -a' to export SHELLOPTS when one of the shell
+    options was changed was fixed.
+
+dd. The `kill' builtin now disallows empty or missing process id arguments
+    instead of treating them as identical to `0', which means the current
+    process.
+
+ee. `var=value declare -x var' now behaves identically to
+    `var=value export var'.  Similarly for `var=value declare -r var' and
+    `var=value readonly var'.
+
+ff. A few memory leaks were fixed.
+
+gg. `alias' and `unalias' now print error messages when passed an argument
+    that is not an alias for printing or deletion, even when the shell is
+    not interactive, as POSIX.2 specifies.
+
+hh. `alias' and `alias -p' now return a status of 0 when no aliases are
+    defined, as POSIX.2 specifes.
+
+ii. `cd -' now prints the pathname of the new working directory if the shell
+    is interactive.
+
+jj. A fix was made so that the code that binds $PWD now copes with getcwd()
+    returning NULL.
+
+kk. `unset' now checks whether or not a function name it's trying to unset
+    is a valid shell identifier only when the shell is running in posix mode.
+
+ll. A change was made to the code that generates filenames for here documents
+    to make them less prone to name collisions.
+
+mm. The parser was changed so that `time' is recognized as a reserved word
+    only at the beginning of a pipeline.
+
+nn. The pathname canonicalization code was changed so that `//' is converted
+    into `/', but all other pathnames beginning with `//' are left alone, as
+    POSIX.2 specifies.
+
+oo. The `logout' builtin will no longer exit a non-interactive non-login
+    shell.
+
+2.  Changes to Readline
+
+a.  Fixed a problem in the readline test program rltest.c that caused a core
+    dump.
+
+b.  The code that handles parser directives in inputrc files now displays
+    more error messages.
+
+c.  The history expansion code was fixed so that the appearance of the
+    history comment character at the beginning of a word inhibits history
+    expansion for that word and the rest of the input line.
+
+3.  New Features in Bash
+
+a.  A new version of malloc, based on the older GNU malloc, that has many
+    changes, is more page-based, is more conservative with memory usage,
+    and does not `orphan' large blocks when they are freed.
+
+b.  A new version of gmalloc, based on the old GLIBC malloc, with many
+    changes and range checking included by default.
+
+c.  A new implementation of fnmatch(3) that includes full POSIX.2 Basic
+    Regular Expression matching, including character classes, collating
+    symbols, equivalence classes, and support for case-insensitive pattern
+    matching.
+
+d.  ksh-88 egrep-style extended pattern matching ([@+*?!](patlist)) has been
+    implemented, controlled by a new `shopt' option, `extglob'.
+
+e.  There is a new ksh-like `[[' compound command, which implements
+    extended `test' functionality.
+
+f.  There is a new `printf' builtin, implemented according to the POSIX.2
+    specification.
+
+g.  There is a new feature for command substitution: $(< filename) now expands
+    to the contents of `filename', with any trailing newlines removed
+    (equivalent to $(cat filename)).
+
+h.  There are new tilde prefixes which expand to directories from the
+    directory stack.
+
+i.  There is a new `**' arithmetic operator to do exponentiation.
+
+j.  There are new configuration options to control how bash is linked:
+    `--enable-profiling', to allow bash to be profiled with gprof, and
+    `--enable-static-link', to allow bash to be linked statically.
+
+k.  There is a new configuration option, `--enable-cond-command', which
+    controls whether or not the `[[' command is included.  It is on by
+    default.
+
+l.  There is a new configuration option, `--enable-extended-glob', which
+    controls whether or not the ksh extended globbing feature is included.
+    It is enabled by default.
+
+m.  There is a new configuration #define in config.h.top that, when enabled,
+    will cause all login shells to source /etc/profile and one of the user-
+    specific login shell startup files, whether or not the shell is
+    interactive.
+
+n.  There is a new invocation option, `--dump-po-strings', to dump
+    a shell script's translatable strings ($"...") in GNU `po' format.
+
+o.  There is a new `shopt' option, `nocaseglob', to enable case-insensitive
+    pattern matching when globbing filenames and using the `case' construct.
+
+p.  There is a new `shopt' option, `huponexit', which, when enabled, causes
+    the shell to send SIGHUP to all jobs when an interactive login shell
+    exits.
+
+q.  `bind' has a new `-u' option, which takes a readline function name as an
+    argument and unbinds all key sequences bound to that function in a
+    specified keymap.
+
+r.  `disown' now has `-a' and `-r' options, to limit operation to all jobs
+    and running jobs, respectively.
+
+s.  The `shopt' `-p' option now causes output to be displayed in a reusable
+    format.
+
+t.  `test' has a new `-N' option, which returns true if the filename argument
+    has been modified since it was last accessed.
+
+u.  `umask' now has a `-p' option to print output in a reusable format.
+
+v.  A new escape sequence, `\xNNN', has been added to the `echo -e' and $'...'
+    translation code.  It expands to the character whose ascii code is NNN
+    in hexadecimal.
+
+w.  The prompt string expansion code has a new `\r' escape sequence.
+
+x.  The shell may now be cross-compiled for the CYGWIN32 environment on
+    a Unix machine.
+
+4.  New Features in Readline
+
+a.  There is now an option for `iterative' yank-last-arg handline, so a user
+    can keep entering `M-.', yanking the last argument of successive history
+    lines.
+
+b.  New variable, `print-completions-horizontally', which causes completion
+    matches to be displayed across the screen (like `ls -x') rather than up
+    and down the screen (like `ls').
+
+c.  New variable, `completion-ignore-case', which causes filename completion
+    and matching to be performed case-insensitively.
+
+d.  There is a new bindable command, `magic-space', which causes history
+    expansion to be performed on the current readline buffer and a space to
+    be inserted into the result.
+
+e.  There is a new bindable command, `menu-complete', which enables tcsh-like
+    menu completion (successive executions of menu-complete insert a single
+    completion match, cycling through the list of possible completions).
+
+f.  There is a new bindable command, `paste-from-clipboard', for use on Win32
+    systems, to insert the text from the Win32 clipboard into the editing
+    buffer.
+
+g.  The key sequence translation code now understands printf-style backslash
+    escape sequences, including \NNN octal escapes.  These escape sequences
+    may be used in key sequence definitions or macro values.
+
+h.  An `$include' inputrc file parser directive has been added.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.01.1-release,
+and the previous version, bash-2.01-release.
+
+1.  Changes to Bash
+
+a.  The select command was fixed to check the validity of the user's
+    input more strenuously.
+
+b.  A bug was fixed that prevented `time' from timing commands correctly
+    when supplied as an argument to `bash -c'.
+
+c.  A fix was made to the mail checking code to keep from adding the same
+    mail file to the list of files to check multiple times when parsing
+    $MAILPATH.
+
+d.  Fixed an off-by-one error in the tilde expansion library.
+
+e.  When using the compound array assignment syntax, the old value of
+    the array is cleared before assigning the new value.
+
+f.  Fixed a bug that could cause a core dump when a trap handler was reset
+    to the default in the trap command associated with that signal.
+
+g.  Fixed a bug in the locale code that occurred when assigning a value
+    to LC_ALL.
+
+h.  A change was made to the parser so that words of the form xxx=(...)
+    are not considered compound assignment statements unless there are
+    characters before the `='.
+
+i.  A fix was made to the command tracing code to correctly quote each
+    word of output.
+
+j.  Some changes were made to the bash-specific autoconf tests to make them
+    more portable.
+
+k.  Completion of words with globbing characters now correctly quotes the
+    result.
+
+l.  The directory /var/spool/mail is now preferred to /usr/spool/mail when
+    configure is deciding on the default mail directory.
+
+m.  The brace completion code was fixed to not quote the `{' and `}'.
+
+n.  Some fixes were made to make $RANDOM more random in subshells.
+
+o.  System-specific changes were made to configure for: SVR4.2
+
+p.  Changes were made so that completion of words containing globbing chars
+    substitutes the result only if a single filename was matched.
+
+q.  The window size is now recomputed after a job is stopped with SIGTSTP if
+    the user has set `checkwinsize' with `shopt'.
+
+r.  When doing substring expansion, out-of-range substring specifiers now
+    cause nothing to be substituted rather than an expansion error.
+
+s.  A fix was made so that you can no longer trap `SIGEXIT' or `SIGDEBUG' --
+    only `EXIT' and `DEBUG' are accepted.
+
+t.  The display of trapped signals now uses the signal number if signals
+    for which bash does not know the name are trapped.
+
+u.  A fix was made so that `bash -r' does not turn on restricted mode until
+    after the startup files are executed.
+
+v.  A bug was fixed that occasionally caused a core dump when a variable
+    found in the temporary environment of export/declare/readonly had a
+    null value.
+
+w.  A bug that occasionally caused unallocated memory to be passed to free()
+    when doing arithmetic substitution was fixed.
+
+x.  A bug that caused a buffer overrun when expanding a prompt string
+    containing `\w' and ${#PWD} exceeded PATH_MAX was fixed.
+
+y.  A problem with the completion code that occasionally caused it to
+    refer to a character before the beginning of the readline line buffer
+    was fixed.
+
+z.  A bug was fixed so that the `read' builtin restarts reads when
+    interrupted by signals other than SIGINT.
+
+aa. Fixed a bug that caused a command to be freed twice when there was
+    an evaluation error in the `eval' command.
+
+2.  Changes to Readline
+
+a.  Added a missing `extern' to a declaration in readline.h that kept
+    readline from compiling cleanly on some systems.
+
+b.  The history file is now opened with mode 0600 when it is written for
+    better security.
+
+c.  Changes were made to the SIGWINCH handling code so that prompt redisplay
+    is done better.
+
+d.  ^G now interrupts incremental searches correctly.
+
+e.  A bug that caused a core dump when the set of characters to be quoted
+    when completing words was empty was fixed.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.01-release,
+and the previous version, bash-2.01-beta2.
+
+1.  Changes to Bash
+
+a.  The `distclean' target should remove the `printenv' executable if it
+    has been created.
+
+b.  The test suite was changed slightly to ensure that the error messages
+    are printed in English.
+
+c.  A bug that caused the shell to dump core when a filename containing a
+    `/' was passed to `hash' was fixed.
+
+d.  Pathname canonicalization now leaves a leading `//' intact, as POSIX.1
+    requires.
+
+e.  A memory leak when completing commands was fixed.
+
+f.  A memory leak that occurred when checking the hash table for commands
+    with relative paths was fixed.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.01-beta2,
+and the previous version, bash-2.01-beta1.
+
+1.  Changes to Bash
+
+a.  The `ulimit' builtin translates RLIM_INFINITY to the hard limit only if
+    the current (soft) limit is less than or equal to the hard limit.
+
+b.  Fixed a bug that caused the bash emulation of strcasecmp to produce
+    incorrect results.
+
+c.  A bug that caused memory to be freed twice when a trap handler resets
+    the trap more than once was fixed.
+
+d.  A bug that caused machines where sizeof (pointer) > sizeof (int) to
+    fail (and possibly dump core) when trying to unwind-protect a null
+    pointer was fixed.
+
+e.  The startup files should not be run with job control enabled.  This fix
+    allows SIGINT to once again interrupt startup file execution.
+
+f.  Bash should not change the SIGPROF handler if it is set to something
+    other than SIG_DFL.
+
+g.  The completion code that provides bash-specific completions for readline
+    now quotes characters that the readline code would treat as word break
+    characters if they appear in a file name.
+
+h.  The completion code now correctly quotes filenames containing a `!',
+    even if the user attempted to use double quotes when attempting
+    completion.
+
+i.  A bug that caused the shell to dump core when `disown' was called without
+    arguments and there was no current job was fixed.
+
+j.  A construct like $((foo);bar) is now processed as a command substitution
+    rather than as a bad arithmetic substitution.
+
+k.  A couple of bugs that caused `fc' to not obey the `cmdhist' and `lithist'
+    shell options when editing and re-executing a series of commands were
+    fixed.
+
+l.  A fix was made to the grammar -- the list of commands between `do' and
+    `done' in the body of a `for' command should be treated the same as a
+    while loop.
+
+2.  Changes to Readline
+
+a.  A couple of bugs that caused the history search functions to attempt to
+    free a NULL pointer were fixed.
+
+b.  If the C library provides setlocale(3), readline does not need to look
+    at various environment variables to decide whether or not to go into
+    eight-bit mode automatically -- just check whether the current locale
+    is not `C' or `POSIX'.
+
+c.  If the filename completion function finds that a directory was not closed
+    by a previous (interrupted) completion, it closes the directory with
+    closedir().
+
+3.  New Features in Bash
+
+a.  New bindable readline commands:  history-and-alias-expand-line and
+    alias-expand-line.  The code was always in there, there was just no
+    way to execute it.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.01-beta1,
+and the previous version, bash-2.01-alpha1.
+
+1.  Changes to Bash
+
+a.  Fixed a problem that could cause file descriptors used for process
+    substitution to conflict with those used explicitly in redirections.
+
+b.  Made it easier to regenerate configure if the user changes configure.in.
+
+c.  ${GROUPS[0]} should always be the primary group, even on systems without
+    multiple groups.
+
+d.  Spelling correction is no longer enabled by default.
+
+e.  Fixes to quoting problems in `bashbug'.
+
+f.  OS-specific configuration changes were made for: Irix 6.
+
+g.  OS-specific code changes were made for: QNX.
+
+h.  A more meaningful message is now printed when the file in /tmp for a
+    here document cannot be created.
+
+i.  Many changes to the shell's variable initialization code to speed
+    non-interactive startup.
+
+j.  Changes to the non-job-control code so that it does not try to open
+    /dev/tty.
+
+k.  The output of `set' and `export' is once again sorted, as POSIX wants.
+
+l.  Fixed a problem caused by a recursive call reparsing the value of
+    $SHELLOPTS.
+
+m.  The tilde code no longer calls getenv() when it's compiled as part of
+    the shell, which should eliminate problems on systems that cannot
+    redefine getenv(), like the NeXT OS.
+
+n.  Fixed a problem that caused `bash -o' or `bash +o' to not list all
+    the shell options.
+
+o.  Fixed `ulimit' to convert RLIM_INFINITY to the appropriate hard limit
+    only if the hard limit is greater than the current (soft) limit.
+
+p.  Fixed a problem that arose when building bash in a different directory
+    than the source and y.tab.[ch] were remade with something other than
+    bison.  This came up most often on NetBSD.
+
+q.  Fixed a problem with completion -- it thought that `pwd`/[TAB] indicated
+    an unfinished command completion (`/), which generated errors.
+
+r.  The bash special tilde expansions (~-, ~+) are now attempted before
+    calling the standard tilde expansion code, which should eliminate the
+    problems people have been seeing with this on Solaris 2.5.1.
+
+s.  Added support for <stdarg.h> to places where it was missing.
+
+t.  Changed the code that reads the output of a command substitution to not
+    go through stdio.  This reduces the memory requirements and is faster.
+
+u.  A number of changes to speed up export environment creation were made.
+
+v.  A number of memory leaks were fixed as the result of running the test
+    scripts through Purify.
+
+w.  Fixed a bug that caused subshells forked to interpret executable
+    scripts without a leading `#!' to not reinitialize the values of
+    the shell options.
+
+2.  Changes to Readline
+
+a.  History library has less `#ifdef SHELL' code -- abstracted stuff out
+    into application-specific function hooks.
+
+b.  Readline no longer calls getenv() if it's compiled as part of the shell,
+    which should eliminate problems on systems that cannot redefine getenv(),
+    like the NeXT OS.
+
+c.  Fixed translation of ESC when `untranslating' macro values.
+
+d.  The region kill operation now fixes the mark if it ends up beyond the
+    boundaries of the line after the region is deleted.
+
+3.  New Features in Bash
+
+a.  New argument for `configure':  `--with-curses'.  This can be used to
+    override the selection of the termcap library on systems where it is
+    deficient.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.01-alpha1,
+and the previous version, bash-2.0-release.
+
+1.  Changes to Bash
+
+a.  System-specific configuration changes for: FreeBSD, SunOS4, Irix,
+    MachTen, QNX 4.2, Harris Night Hawk, SunOS5.
+
+b.  System-specific code changes were made for: Linux, 4.4 BSD, QNX 4.2,
+    HP-UX, AIX 4.2.
+
+c.  A bug that caused the exec builtin to fail because the full pathname of
+    the command could not be found was fixed.
+
+d.  The code that performs output redirections is now more resistant to
+    race conditions and possible security exploits.
+
+e.  A bug that caused the shell to dump core when performing pattern
+    substitutions on variable values was fixed.
+
+f.  More hosts are now recognized by the auto-configuration mechanism
+    (OpenBSD, QNX, others).
+
+g.  Assignments to read-only variables that attempt to convert them to
+    arrays are now errors.
+
+h.  A bug that caused shell scripts using array assignments in POSIX mode
+    to exit after the assignment was performed was fixed.
+
+i.  The substring expansion code is now more careful about running off the
+    ends of the expanded variable value.
+
+j.  A bug that caused completion to fail if a backquoted command substitution
+    appeared anywhere on the line was fixed.
+
+k.  The `source' builtin no longer turns off history if it has been enabled
+    in a non-interactive shell.
+
+l.  A bug that caused the shell to crash when `disown' was given a pid
+    instead of a job number was fixed.
+
+m.  The `cd' spelling correction code will not try to change to `.' if no
+    directory entries match a single-character argument.
+
+n.  A bad variable name supplied to `declare', `export', or `readonly' no
+    longer causes a non-interactive shell in POSIX mode to exit.
+
+o.  Some fixes were made to the test suite to handle peculiarities of
+    various Unix versions.
+
+p.  The bash completion code now quotes characters that readline would
+    treat as word breaks for completion but are not shell metacharacters.
+
+q.  Bad options supplied at invocation now cause a usage message to be
+    displayed.
+
+r.  Fixes were made to the code that handles DEBUG traps so that the trap
+    string is not freed inappropriately.
+
+s.  Some changes were made to the bash debugger in examples/bashdb -- it
+    should be closer to working now.
+
+t.  A problem that caused the default filename used for mail checking to be
+    wrong was fixed.
+
+u.  A fix was made to the `echo' builtin so that NUL characters printed with
+    `echo -e' do not cause the output to be truncated.
+
+v.  A fix was made to the job control code so that the shell behaves better
+    when monitor mode is enabled in a non-interactive shell.
+
+w.  Bash no longer catches all of the terminating signals in a non-
+    interactive shell until a trap is set on EXIT, which should result in
+    quicker startup.
+
+x.  A fix was made to the command timing code so that `time' can be used in
+    a loop.
+
+y.  A fix was made to the parser so that `((cmd); cmd2)' is now parsed as
+    a nested subshell rather than strictly as an (erroneous) arithmetic
+    command.
+
+z.  A fix was made to the globbing code so that it correctly matches quoted
+    filenames beginning with a `.'.
+
+aa. A bug in `fc' that caused some multi-line commands to not be stored as
+    one command in the history when they were re-executed after editing
+    (with `fc -e') was fixed.
+
+bb. The `ulimit' builtin now attempts to catch some classes of integer
+    overflows.
+
+cc. The command-oriented-history code no longer attempts to add `;'
+    inappropriately when a newline appears while reading a $(...) command
+    substitution.
+
+dd. A bug that caused the shell to dump core when `help --' was executed
+    was fixed.
+
+ee. A bug that caused the shell to crash when an unset variable appeared
+    in the body of a here document after `set -u' had been executed was
+    fixed.
+
+ff. Implicit input redirections from /dev/null for asynchronous commands
+    are now handled better.
+
+gg. A bug that caused the shell to fail to compile when configured with
+    `--disable-readline' was fixed.
+
+hh. The globbing code should now be interruptible.
+
+ii. Bash now notices when the `kill' builtin is used to send SIGCONT to a
+    stopped job and adjusts the data structures accordingly, as if `bg' had
+    been executed instead.
+
+jj. A bug that caused the shell to crash when mixing calls to `getopts'
+    and `shift' on the same set of positional parameters was fixed.
+
+kk. The command printing code now preserves the `-p' flag to `time'.
+
+ll. The command printing code now handles here documents better when there
+    are other redirections associated with the command.
+
+mm. The special glibc environment variable (NNN_GNU_nonoption_argv_flags_)
+    is no longer placed into the environment of executed commands -- users
+    of glibc had too many problems with it.
+
+nn. Reorganized the code that generates signames.h.  The signal_names list
+    is now more complete but may be slightly different (SIGABRT is favored
+    over SIGIOT, for example).  The preferred signal names are those
+    listed in the POSIX.2 standard.
+
+oo. `bashbug' now uses a filename shorter than 14 characters for its
+    temporary file, and asks for confirmation before sending the bug
+    report.
+
+pp. A bug that caused TAB completion in vi editing mode to not be turned
+    off when `set -o posix' was executed or back on when `set +o posix'
+    was executed was fixed.
+
+qq. A bug in the brace expansion code that caused brace expansions appearing
+    in new-style $(...) command substitutions to be inappropriately expanded
+    was fixed.
+
+rr. A bug in the readline hook shell-expand-line that could cause memory to
+    be inappropriately freed was fixed.
+
+ss. A bug that caused some arithmetic expressions containing `&&' and `||'
+    to be parsed with the wrong precedence has been fixed.
+
+tt. References to unbound variables after `set -u' has been executed now
+    cause the shell to exit immediately, as they should.
+
+uu. A bug that caused the shell to exit inappropriately when `set -e' had
+    been executed and a command's return status was being inverted with the
+    `!' reserved word was fixed.
+
+vv. A bug that could occasionally cause the shell to crash with a
+    divide-by-zero error when timing a command was fixed.
+
+ww. A bug that caused parameter pattern substitution to leave stray
+    backslashes in the replacement string when the expression is in
+    double quotes was fixed.
+
+xx. The `break' and `continue' builtins now break out of all loops when an
+    invalid count argument is supplied.
+
+yy. Fixed a bug that caused PATH to be set to the empty string if
+    `command -p' is executed with PATH unset.
+
+zz. Fixed `kill -l signum' to print the signal name without the `SIG' prefix,
+    as POSIX specifies.
+
+aaa. Fixed a bug that caused the shell to crash while setting $SHELLOPTS
+     if there were no shell options set.
+
+bbb. Fixed `export -p' and `readonly -p' so that when the shell is in POSIX
+     mode, their output is as POSIX.2 specifies.
+
+ccc. Fixed a bug in `readonly' so that `readonly -a avar=(...)' actually
+     creates an array variable.
+
+ddd. Fixed a bug that prevented `time' from correctly timing background
+     pipelines.
+
+2.  Changes to Readline
+
+a.  A bug that caused an extra newline to be printed when the cursor was on
+    an otherwise empty line was fixed.
+
+b.  An instance of memory being used after it was freed was corrected.
+
+c.  The redisplay code now works when the prompt is longer than the screen
+    width.
+
+d.  `dump-macros' is now a bindable name, as it should have been all along.
+
+e.  Non-printable characters are now expanded when displaying macros and
+    their values.
+
+f.  The `dump-variables' and `dump-macros' commands now output a leading
+    newline if they're called as the result of a key sequence, rather
+    than directly by an application.
+
+3.  New Features in Bash
+
+a.  There is a new builtin array variable: GROUPS, the set of groups to which
+    the user belongs.  This is used by the test suite.
+
+4.  New Features in Readline
+
+a.  If a key sequence bound to `universal-argument' is read while reading a
+    numeric argument started with `universal-argument', it terminates the
+    argument but is otherwise ignored.  This provides a way to insert multiple
+    instances of a digit string, and is how GNU emacs does it.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.0-release,
+and the previous version, bash-2.0-beta3.
+
+1.  Changes to Bash
+
+a.  Fix to the `getopts' builtin so that it does the right thing when a
+    required option argument is not present.
+
+b.  The completion code now updates the common prefix of matched names
+    after FIGNORE processing is done, since any names that were removed
+    may have changed the common prefix.
+
+c.  Fixed a bug that made messages in MAILPATH entries not work correctly.
+
+d.  Fixed a serious documentation error in the description of the new
+    ${parameter:offset[:length]} expansion.
+
+e.  Fixes to make parameter substring expansion ({$param:offset[:length]})
+    work when within double quotes.
+
+f.  Fixes to make ^A (CTLESC) survive an unquoted expansion of positional
+    parameters.
+
+g.  Corrected a misspelling of `unlimited' in the output of `ulimit'.
+
+h.  Fixed a bug that caused executable scripts without a leading `#!' to
+    occasionally pick up the wrong set of positional parameters.
+
+i.  Linux systems now have a working `ulimit -v', using RLIMIT_AS.
+
+j.  Updated config.guess so that many more machine types are recognized.
+
+k.  Fixed a bug with backslash-quoted slashes in the ${param/pat[/sub]}
+    expansion.
+
+l.  If the shell is named `-su', and `-c command' is supplied, read and
+    execute the login shell startup files even though the shell is not
+    interactive.  This is to support the `-' option to `su'.
+
+m.  Fixed a bug that caused core dumps when the DEBUG trap was ignored
+    with `trap "" DEBUG' and a shell function was subsequently executed.
+
+n.  Fixed a bug that caused core dumps in the read builtin when IFS was
+    set to the null string and the input had leading whitespace.
+
+2.  Changes to Readline
+
+a.  Fixed a bug that caused a numeric argument of 1024 to be ignored when
+    inserting text.
+
+b.  Fixed the display code so that the numeric argument is displayed as it's
+    being entered.
+
+c.  Fixed the numeric argument reading code so that `M-- command' is
+    equivalent to `M--1 command', as the prompt implies.
+
+3.  New Features in Bash
+
+a.  `ulimit' now sets both hard and soft limits and reports the soft limit
+    by default (when neither -H nor -S is specified).  This is compatible
+    with versions of sh and ksh that implement `ulimit'.
+
+b.  Integer constants have been extended to base 64.
+
+4.  New Features in Readline
+
+a.  The `home' and `end' keys are now bound to beginning-of-line and
+    end-of-line, respectively, if the corresponding termcap capabilities
+    are present.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.0-beta3,
+and the previous version, bash-2.0-beta2.
+
+1.  Changes to Bash
+
+a.  System-specific changes for: AIX 4.2, SCO 3.2v[45], HP-UX.
+
+b.  When in POSIX mode, variable assignments preceding a special builtin
+    persist in the shell environment after the builtin completes.
+
+c.  Changed all calls to getwd() to getcwd().  Improved check for systems
+    where the libc getcwd() calls popen(), since that breaks on some
+    systems when job control is being used.
+
+d.  Fixed a bug that caused seg faults when executing scripts with the
+    execute bit set but without a leading `#!'.
+
+e.  The environment passed to executed commands is never sorted.
+
+f.  A bug was fixed in the code that expands ${name[@]} to the number of
+    elements in an array variable.
+
+g.  A bug was fixed in the array compound assignment code ( A=( ... ) ).
+
+h.  Window size changes now correctly propagate down to readline if
+    the shopt `checkwinsize' option is enabled.
+
+i.  A fix was made in the code that expands to the length of a variable
+    value (${#var}).
+
+j.  A fix was made to the command builtin so that it did not turn on the
+    `no fork' flag inappropriately.
+
+k.  A fix was made to make `set -n' work more reliably.
+
+l.  A fix was made to the job control initialization code so that the
+    terminal process group is set to the shell's process group if the
+    shell changes its own process group.
+
+2.  Changes to Readline
+
+a.  System-specific changes for: SCO 3.2v[45].
+
+b.  The behavior of the vi-mode `.' when redoing an `i' command was changed
+    to insert the text previously inserted by the `i' command rather than
+    simply entering insert mode.
+
+3.  New features in Bash
+
+a.  There is a new version of the autoload function package, in
+    examples/functions/autoload.v2, that uses arrays and provides more
+    functionality.
+
+b.  Support for LC_COLLATE and locale-specific sorting of the results of
+    pathname expansion if strcoll() is available.
+
+4.  New Features in Readline
+
+a.  Support for locale-specific sorting of completion possibilities if
+    strcoll() is available.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.0-beta2,
+and the previous version, bash-2.0-beta1.
+
+1.  Changes to Bash
+
+a.  `pushd -' is once again equivalent to `pushd $OLDPWD'.
+
+b.  OS-specific changes for: SCO 3.2v[45].
+
+c.  A change was made to the fix for the recently-reported security hole
+    when reading characters with octal value 255 to make it work better on
+    systems with restartable system calls when not using readline.
+
+d.  Some changes were made to the test suite so that it works if you
+    configure bash with --enable-usg-echo-default.
+
+e.  A fix was made to the parsing of conditional arithmetic expressions.
+
+f.  Illegal arithmetic bases now cause an arithmetic evaluation error rather
+    than being silently reset.
+
+g.  Multiple arithmetic bases now cause an arithmetic evaluation error
+    instead of being ignored.
+
+h.  A fix was made to the evaluation of ${param?word} to conform to POSIX.2.
+
+i.  A bug that sometimes caused array indices to be evaluated twice (which
+    would cause errors when they contained assignment statements) was fixed.
+
+j.  `ulimit' was rewritten to avoid problems with getrlimit(2) returning
+    unsigned values and to simplify the code.
+
+k.  A bug in the command-oriented-history code that caused it to sometimes
+    put semicolons after right parens inappropriately was fixed.
+
+l.  The values inserted into the prompt by the \w and \W escape sequences
+    are now quoted to prevent further expansion.
+
+m.  An interactive shell invoked as `sh' now reads and executes commands
+    from the file named by $ENV when it starts up.  If it's a login shell,
+    it does this after reading /etc/profile and ~/.profile.
+
+n.  The file named by $ENV is never read by non-interactive shells.
+
+2.  Changes to Readline
+
+a.  A few changes were made to hide some macros and functions that should not
+    be public.
+
+b.  An off-by-one error that caused seg faults in the history expansion code
+    was fixed.
+
+3.  New Features in Bash
+
+a.  The ksh-style ((...)) arithmetic command was implemented.  It is exactly
+    identical to let "...".  This is controlled by a new option to configure,
+    `--enable-dparen-arithmetic', which is on by default.
+
+b.  There is a new #define available in config.h.top: SYS_BASH_LOGOUT.  If
+    defined to a filename, bash reads and executes commands from that file
+    when a login shell exits.  It's commented out by default.
+
+c.  `ulimit' has a `-l' option that reports the maximum amount of data that
+    may be locked into memory on 4.4BSD-based systems.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.0-beta1,
+and the previous version, bash-2.0-alpha4.
+
+1.  Changes to Bash
+
+a.  A bug that sometimes caused traps to be ignored on signals the
+    shell treats specially was fixed.
+
+b.  The internationalization code was changed to track the values of
+    LC_* variables and call setlocale() as appropriate.  The TEXTDOMAIN
+    and TEXTDOMAINDIR variables are also tracked; changes cause calls
+    to textdomain() and bindtextdomain(), if available.
+
+c.  A bug was fixed that sometimes caused double-quoted strings to be
+    parsed incorrectly.
+
+d.  Changes were made so that the siglist code compiles correctly on
+    Solaris 2.5.
+
+e.  Added `:' to the set of characters that cause word breaks for the
+    completion code so that pathnames in assignments to $PATH can be
+    completed.
+
+f.  The `select' command was fixed to print $PS3 to stderr.
+
+g.  Fixed an error in the manual page section describing the effect that
+    setting and unsetting GLOBIGNORE has on the setting of the `dotglob'
+    option.
+
+h.  The time conversion code now uses CLK_TCK rather than CLOCKS_PER_SEC
+    on systems without gettimeofday() and resources.
+
+i.  The getopt static variables are now initialized each time a subshell
+    is started, so subshells using `getopts' work right.
+
+j.  A sign-extension bug that caused a possible security hole was fixed.
+
+k.  The parser now reads characters between backquotes within a double-
+    quoted string as a single word, so double quotes in the backquoted
+    string don't terminate the enclosing double-quoted string.
+
+l.  A bug that caused `^O' to work incorrectly when typed as the first
+    thing to an interactive shell was fixed.
+
+m.  A rarely-exercised off-by-one error in the code that quotes variable
+    values was fixed.
+
+n.  Some memory and file descriptor leaks encountered when running a
+    shell script that is executable but does not have a leading `#!'
+    were plugged.
+
+2.  Changes to Readline
+
+a.  A bug that sometimes caused incorrect results when trying to read
+    typeahead on systems without FIONREAD was fixed.
+
+3.  New Features in Bash
+
+a.  The command timing code now uses the value of the TIMEFORMAT variable
+    to format and display timing statistics.
+
+b.  The `time' reserved word now accepts a `-p' option to force the
+    POSIX.2 output format.
+
+c.  There are a couple of new and updated scripts to convert csh startup
+    files to bash format.
+
+d.  There is a new builtin array variable: BASH_VERSINFO.  The various
+    members hold the parts of the version information in BASH_VERSION,
+    plus the value of MACHTYPE.
+
+4.  New Features in Readline
+
+a.  Setting LANG to `en_US.ISO8859-1' now causes readline to enter
+    eight-bit mode.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.0-alpha4,
+and the previous version, bash-2.0-alpha3.
+
+1.  Changes to Bash
+
+a.  There is better detection of rsh connections on Solaris 2.
+
+b.  Assignments to read-only variables preceding a command name are now
+    variable assignment errors.  Variable assignment errors cause
+    non-interactive shells running in posix mode to exit.
+
+c.  The word tokenizer was rewritten to handle nested quotes and pairs
+    ('', "", ``, ${...}, $(...), $[...], $'...', $"...", <(...), >(...))
+    correctly.  Some of the parameter expansion code was updated as a
+    consequence.
+
+d.  A fix was made to `test' when given three arguments so that a binary
+    operator is checked for first, before checking that the first argument
+    is `!'.
+
+e.  2''>/dev/null is no longer equivalent to 2>/dev/null.
+
+f.  Parser error messages were regularized, and in most cases the name of
+    the shell script being read by a non-interactive shell is not printed
+    twice.
+
+g.  A fix was made to the completion code so that it no longer removes the
+    text the user typed in some cases.
+
+h.  The special glibc `getopt' environment variable is no longer put into
+    the environment on machines with small values of ARG_MAX.
+
+i.  The expansion of ${...} now follows the POSIX.2 rules for finding the
+    closing `}'.
+
+j.  The shell no longer displays spurious status messages for background
+    jobs in shell scripts that complete successfully when the script is
+    run from a terminal.
+
+k.  `shopt -o' now correctly updates $SHELLOPTS.
+
+l.  A bug that caused the $PATH searching code to return a non-executable
+    file even when an executable file with the same name appeared later in
+    $PATH was fixed.
+
+m.  The shell now does tilde expansions on unquoted `:~' in assignment
+    statements when not in posix mode.
+
+n.  Variable assignment errors when a command consists only of assignments
+    now cause non-interactive shells to exit when in posix mode.
+
+o.  If the variable in a `for' or `select' command is read-only, or not a
+    legal shell identifier, a variable assignment error occurs.
+
+p.  `test' now handles `-a' and `-o' as binary operators when three arguments
+    are supplied, and correctly parses `( word )' as equivalent to `word'.
+
+q.  `test' was fixed so that file names of the form /dev/fd/NN mean the same
+    thing on all systems, even Linux.
+
+r.  Fixed a bug in the globbing code that caused patterns with multiple
+    consecutive `*'s to not be matched correctly.
+
+s.  Fixed a bug that caused $PS2 to not be printed when an interactive shell
+    not using readline is reading a here document.
+
+t.  Fixed a bug that caused history expansion to be performed inappropriately
+    when a single-quoted string spanned more than one line.
+
+u.  `getopts' now checks that the variable name passed by the user as the
+    second argument is a legal shell identifier and that the variable is
+    not read-only.
+
+v.  Fixed `getopts' to obey POSIX.2 rules for setting $OPTIND when it
+    encounters an error.
+
+w.  Fixed `set' to display variable values in a form that can be re-read.
+
+x.  Fixed a bug in the code that keeps track of whether or not local variables
+    have been declared at the current level of function nesting.
+
+y.  Non-interactive shells in posix mode now exit if the name in a function
+    declaration is not a legal identifier.
+
+z.  The job control code now ignores stopped children when the shell is not
+    interactive.
+
+aa. The `cd' builtin no longer attempts spelling correction on the directory
+    name if the shell is not interactive, regardless of the setting of the
+    `cdspell' option.
+
+bb. Some OS-specific changes were made for SCO 3.2v[45] and AIX 4.2.
+
+cc. `time' now prints its output to stderr, as POSIX.2 specifies.
+
+2.  Fixes to Readline
+
+a.  After printing possible completions, all lines of a multi-line prompt
+    are redisplayed.
+
+b.  Some changes were made to the terminal handling code in rltty.c to
+    work around AIX 4.2 bugs.
+
+3.  New Features in Bash
+
+a.  There is a new loadable builtin: sprintf, with calling syntax
+		sprintf var format [args]
+    This provides an easy way to simulate ksh left- and right-justified
+    variable values.
+
+b.  The expansions of \h and \H in prompt strings were swapped.  \h now
+    expands to the hostname up to the first `.', as in bash-1.14.
+
+4.  New Features in Readline
+
+a.  The bash-1.14 behavior when ^M is typed while doing an incremental
+    search was restored.  ^J may now be used to terminate the search without
+    accepting the line.
+
+b.  There is a new bindable variable: disable-completion.  This inhibits
+    word completion and causes the completion character to be inserted as
+    if it had been bound to self-insert.
+
+------------------------------------------------------------------------------
+This document details the changes between this version, bash-2.0-alpha3,
+and the previous version, bash-2.0-alpha2.
+
+There is now a file `COMPAT' included in the distribution that lists the
+user-visible incompatibilities between 1.14 and 2.0.
+
+1. Changes to Bash
+
+a. Some work was done so that word splitting of the rhs of assignment
+   statements conforms more closely to historical practice.
+
+b. A couple of errant memory frees were fixed.
+
+c. A fix was made to the test builtin so it recognizes `<' and `>' as
+   binary operators.
+
+d. The GNU malloc in lib/malloc/malloc.c now scrambles memory as it's
+   allocated and freed.  This is to catch callers that refer to freed
+   memory or assume something about newly-allocated memory.
+
+e. Fixed a problem with conversion to 12-hour time in the prompt
+   expansion code.
+
+f. Fixed a problem with configure's argument parsing order.  Now you can
+   correctly turn on specific options after using --enable-minimal-config.
+
+g. The configure script now automatically disables the use of GNU malloc
+   on systems where it's appropriate (better than having people read the
+   NOTES file and do it manually).
+
+h. There are new prompt expansions (\v and \V) to insert version information
+   into the prompt strings.
+
+i. The default prompt string now includes the version number.
+
+j. Most of the builtins that take no options were changed to use the
+   internal getopt so they can produce proper error messages for -?
+   and incorrect options.
+
+k. Some system-specific changes were made for SVR4.2 and Solaris 2.5.
+
+l. Bash now uses PATH_MAX instead of MAXPATHLEN and NAME_MAX instead of
+   MAXNAMLEN.
+
+m. A couple of problems caused by uninitialized variables were fixed.
+
+n. There are a number of new loadable builtin examples: logname, basename,
+   dirname, tty, pathchk, tee, head, and rmdir.  All of these conform to
+   POSIX.2.
+
+o. Bash now notices changes in TZ and calls tzset() if present, so
+   changing TZ will alter the time printed by prompt expansions.
+
+p. The source was reorganized a bit so I don't have to wait so long for
+   some files to compile, and to facilitate the creation of a `shell
+   library' at some future point.
+
+q. Bash no longer turns off job control if called as `sh', since the
+   POSIX.2 spec includes job control as a standard feature.
+
+r. `bash -o posix' now works as intended.
+
+s. Fixed a problem with the completion code: when completing a filename
+   that contained globbing characters, if show-all-if-ambiguous was set,
+   the completion code would remove the user's text.
+
+t. Fixed ulimit so that (hopefully) the full range of limits is available
+   on HPUX systems.
+
+u. A new `shopt' option (`hostcomplete') enables and disables hostname
+   completion.
+
+v. The shell no longer attempts to save the history on an abort(),
+   which is usually called by programming_error().
+
+w. The `-s' option to `fc' was changed to echo the command to be executed
+   to stderr instead of stdout.
+
+x. If the editor invoked by `fc -e' exits with a non-zero status, no
+   commands are executed.
+
+y. Fixed a bug that made the shopt `histverify' option work incorrectly.
+
+z. There is a new variable `MACHTYPE' whose value is the GNU-style
+   `cpu-company-system' system description as set by configure.  (The
+   values of MACHTYPE and HOSTTYPE should really be swapped.)
+
+aa. The `ulimit' builtin now allows the maximum virtual memory size to be
+    set via setrlimit(2) if RLIMIT_VMEM is defined.
+
+bb. `bash -nc 'command'' no longer runs `command'.
+
+2. Changes to Readline
+
+a. Fixed a typo in the code that checked for FIONREAD in input.c.
+
+b. Fixed a bug in the code that outputs keybindings, so things like C-\
+   are quoted properly.
+
+c. Fixed a bug in the inputrc file parsing code to handle the problems
+   caused by inputrc files created from the output of `bind -p' in
+   previous versions of bash.  The problem was due to the bug fixed
+   in item b above.
+
+d. Readline no longer turns off the terminal's meta key, and turns it on
+   once the first time it's called.
+
+------------------------------------------------------------------------------
+This file documents the changes between this version, bash-2.0-alpha2,
+and the previous version, bash-2.0-alpha.
+
+1. Changes to Bash
+
+a. The shell no longer thinks directories are executable.
+
+b. `disown' has a new option, `h', which inhibits the resending of SIGHUP
+   but does not remove the job from the jobs table.
+
+c. The varargs functions in error.c now use ANSI-C `stdarg' if available.
+
+d. The build process now treats the `build version' in .build as local to
+   the build directory, so different versions built from the same source
+   tree have different `build versions'.
+
+e. Some problems with the grammar have been fixed. (It used `list' in a few
+   productions where `compound_list' was needed.  A `list' must be terminated
+   with a newline or semicolon; a `compound_list' need not be.)
+
+f. A fix was made to keep `wait' from hanging when waiting for all background
+   jobs.
+
+g. `bash --help' now writes its output to stdout, like the GNU Coding Standards
+   specify, and includes the machine type (the value of MACHTYPE).
+
+h. `bash --version' now prints more information and exits successfully, like
+   the GNU Coding Standards specify.
+
+i. The output of `time' and `times' now prints fractional seconds with three
+   places after the decimal point.
+
+j. A bug that caused process substitutions to screw up the pipeline printed
+   by `jobs' was fixed.
+
+k. Fixes were made to the code that implements $'...' and $"..." so they
+   work as documented.
+
+l. The process substitution code now opens named pipes for reading with
+   O_NONBLOCK to avoid hanging.
+
+m. Fixes were made to the trap code so the shell cleans up correctly if the
+   trap command contains a `return' and we're executing a function or
+   sourcing a script with `.'.
+
+n. Fixes to doc/Makefile.in so that it doesn't try to remake all of the
+   documentation (ps, dvi, etc.) on a `make install'.
+
+o. Fixed an auto-increment error that caused bash -c args to sometimes dump
+   core.
+
+p. Fixed a bug that caused $HISTIGNORE to fail when the history line
+   contained globbing characters.
+
+2. Changes to Readline
+
+a. There is a new string variable, rl_library_version, available for use by
+   applications.  The current value is "2.1".
+
+b. A bug encountered when expand-tilde was enabled and file completion was
+   attempted on a word beginning with `~/' was fixed.
+
+c. A slight change was made to the incremental search termination behavior.
+   ESC still terminates the search, but if input is pending or arrives
+   within 0.1 seconds (on systems with select(2)), it is used as a prefix
+   character.  This is intended to allow users to terminate searches with
+   the arrow keys and get the behavior they expect.
diff --git a/COMPAT b/COMPAT
new file mode 100644
index 0000000..5cfb836
--- /dev/null
+++ b/COMPAT
@@ -0,0 +1,552 @@
+Compatibility with previous versions
+====================================
+
+This document details the incompatibilities between this version of bash,
+bash-5.1, and the previous widely-available versions, bash-3.2 (which is
+still the `standard' version for Mac OS X), 4.2/4.3 (which are still
+standard on a few Linux distributions), and bash-4.4/bash-5.0, the current
+widely-available versions.  These were discovered by users of bash-2.x
+through 5.x, so this list is not comprehensive.  Some of these
+incompatibilities occur between the current version and versions 2.0 and
+above. 
+
+1.  Bash uses a new quoting syntax, $"...", to do locale-specific
+    string translation.  Users who have relied on the (undocumented)
+    behavior of bash-1.14 will have to change their scripts.  For
+    instance, if you are doing something like this to get the value of
+    a variable whose name is the value of a second variable:
+
+	eval var2=$"$var1"
+
+    you will have to change to a different syntax.
+
+    This capability is directly supported by bash-2.0:
+
+	var2=${!var1}
+
+    This alternate syntax will work portably between bash-1.14 and bash-2.0:
+
+	eval var2=\$${var1}
+
+2.  One of the bugs fixed in the YACC grammar tightens up the rules
+    concerning group commands ( {...} ).  The `list' that composes the
+    body of the group command must be terminated by a newline or
+    semicolon.  That's because the braces are reserved words, and are
+    recognized as such only when a reserved word is legal.  This means
+    that while bash-1.14 accepted shell function definitions like this:
+
+	foo() { : }
+
+    bash-2.0 requires this:
+
+	foo() { :; }
+
+    This is also an issue for commands like this:
+
+	mkdir dir || { echo 'could not mkdir' ; exit 1; }
+
+    The syntax required by bash-2.0 is also accepted by bash-1.14.
+
+3.  The options to `bind' have changed to make them more consistent with
+    the rest of the bash builtins.  If you are using `bind -d' to list
+    the readline key bindings in a form that can be re-read, use `bind -p'
+    instead.  If you were using `bind -v' to list the key bindings, use
+    `bind -P' instead.
+
+4.  The `long' invocation options must now be prefixed by `--' instead
+    of `-'.  (The old form is still accepted, for the time being.)
+
+5.  There was a bug in the version of readline distributed with bash-1.14
+    that caused it to write badly-formatted key bindings when using 
+    `bind -d'.  The only key sequences that were affected are C-\ (which
+    should appear as \C-\\ in a key binding) and C-" (which should appear
+    as \C-\").  If these key sequences appear in your inputrc, as, for
+    example,
+
+	"\C-\": self-insert
+
+    they will need to be changed to something like the following:
+
+	"\C-\\": self-insert
+
+6.  A number of people complained about having to use ESC to terminate an
+    incremental search, and asked for an alternate mechanism.  Bash-2.03
+    uses the value of the settable readline variable `isearch-terminators'
+    to decide which characters should terminate an incremental search.  If
+    that variable has not been set, ESC and Control-J will terminate a
+    search.
+
+7.  Some variables have been removed:  MAIL_WARNING, notify, history_control,
+    command_oriented_history, glob_dot_filenames, allow_null_glob_expansion,
+    nolinks, hostname_completion_file, noclobber, no_exit_on_failed_exec, and
+    cdable_vars.  Most of them are now implemented with the new `shopt'
+    builtin; others were already implemented by `set'.  Here is a list of
+    correspondences:
+
+	MAIL_WARNING			shopt mailwarn
+	notify				set -o notify
+	history_control			HISTCONTROL
+	command_oriented_history	shopt cmdhist
+	glob_dot_filenames		shopt dotglob
+	allow_null_glob_expansion	shopt nullglob
+	nolinks				set -o physical
+	hostname_completion_file	HOSTFILE
+	noclobber			set -o noclobber
+	no_exit_on_failed_exec		shopt execfail
+	cdable_vars			shopt cdable_vars
+
+8. `ulimit' now sets both hard and soft limits and reports the soft limit
+    by default (when neither -H nor -S is specified).  This is compatible
+    with versions of sh and ksh that implement `ulimit'.  The bash-1.14
+    behavior of, for example,
+
+		ulimit -c 0
+
+    can be obtained with
+
+		ulimit -S -c 0
+
+    It may be useful to define an alias:
+
+		alias ulimit="ulimit -S"
+
+9.  Bash-2.01 uses a new quoting syntax, $'...' to do ANSI-C string
+    translation.  Backslash-escaped characters in ... are expanded and
+    replaced as specified by the ANSI C standard.
+
+10. The sourcing of startup files has changed somewhat.  This is explained
+    more completely in the INVOCATION section of the manual page.
+
+    A non-interactive shell not named `sh' and not in posix mode reads
+    and executes commands from the file named by $BASH_ENV.  A
+    non-interactive shell started by `su' and not in posix mode will read
+    startup files.  No other non-interactive shells read any startup files.
+
+    An interactive shell started in posix mode reads and executes commands
+    from the file named by $ENV.
+
+11. The <> redirection operator was changed to conform to the POSIX.2 spec.
+    In the absence of any file descriptor specification preceding the `<>',
+    file descriptor 0 is used.  In bash-1.14, this was the behavior only
+    when in POSIX mode.  The bash-1.14 behavior may be obtained with
+
+	<>filename 1>&0
+
+12. The `alias' builtin now checks for invalid options and takes a `-p'
+    option to display output in POSIX mode.  If you have old aliases beginning
+    with `-' or `+', you will have to add the `--' to the alias command
+    that declares them:
+
+	alias -x='chmod a-x' --> alias -- -x='chmod a-x'
+
+13. The behavior of range specificiers within bracket matching expressions
+    in the pattern matcher (e.g., [A-Z]) depends on the current locale,
+    specifically the value of the LC_COLLATE environment variable.  Setting
+    this variable to C or POSIX will result in the traditional ASCII behavior
+    for range comparisons.  If the locale is set to something else, e.g.,
+    en_US (specified by the LANG or LC_ALL variables), collation order is
+    locale-dependent.  For example, the en_US locale sorts the upper and
+    lower case letters like this:
+
+	AaBb...Zz
+
+    so a range specification like [A-Z] will match every letter except `z'.
+    Other locales collate like
+
+        aAbBcC...zZ
+
+    which means that [A-Z] matches every letter except `a'.
+
+    The portable way to specify upper case letters is [:upper:] instead of
+    A-Z; lower case may be specified as [:lower:] instead of a-z.
+
+    Look at the manual pages for setlocale(3), strcoll(3), and, if it is
+    present, locale(1).
+
+    You can find your current locale information by running locale(1):
+
+	caleb.ins.cwru.edu(2)$ locale
+	LANG=en_US
+	LC_CTYPE="en_US"
+	LC_NUMERIC="en_US"
+	LC_TIME="en_US"
+	LC_COLLATE="en_US"
+	LC_MONETARY="en_US"
+	LC_MESSAGES="en_US"
+	LC_ALL=en_US
+
+    My advice is to put
+
+	export LC_COLLATE=C
+
+    into /etc/profile and inspect any shell scripts run from cron for
+    constructs like [A-Z].  This will prevent things like
+
+	rm [A-Z]*
+
+    from removing every file in the current directory except those beginning
+    with `z' and still allow individual users to change the collation order.
+    Users may put the above command into their own profiles as well, of course.
+
+14. Bash versions up to 1.14.7 included an undocumented `-l' operator to
+    the `test/[' builtin.  It was a unary operator that expanded to the
+    length of its string argument.  This let you do things like
+
+	test -l $variable -lt 20
+
+    for example.
+
+    This was included for backwards compatibility with old versions of the
+    Bourne shell, which did not provide an easy way to obtain the length of
+    the value of a shell variable.
+
+    This operator is not part of the POSIX standard, because one can (and
+    should) use ${#variable} to get the length of a variable's value.
+    Bash-2.x does not support it.
+
+15. Bash no longer auto-exports the HOME, PATH, SHELL, TERM, HOSTNAME,
+    HOSTTYPE, MACHTYPE, or OSTYPE variables.  If they appear in the initial
+    environment, the export attribute will be set, but if bash provides a
+    default value, they will remain local to the current shell.
+
+16. Bash no longer initializes the FUNCNAME, GROUPS, or DIRSTACK variables
+    to have special behavior if they appear in the initial environment.
+
+17. Bash no longer removes the export attribute from the SSH_CLIENT or
+    SSH2_CLIENT variables, and no longer attempts to discover whether or
+    not it has been invoked by sshd in order to run the startup files.
+
+18. Bash no longer requires that the body of a function be a group command;
+    any compound command is accepted.
+
+19. As of bash-3.0, the pattern substitution operators no longer perform
+    quote removal on the pattern before attempting the match.  This is the
+    way the pattern removal functions behave, and is more consistent.
+
+20. After bash-3.0 was released, I reimplemented tilde expansion, incorporating
+    it into the mainline word expansion code.  This fixes the bug that caused
+    the results of tilde expansion to be re-expanded.  There is one
+    incompatibility:  a ${paramOPword} expansion within double quotes will not
+    perform tilde expansion on WORD.  This is consistent with the other
+    expansions, and what POSIX specifies.
+
+21. A number of variables have the integer attribute by default, so the +=
+    assignment operator returns expected results: RANDOM, LINENO, MAILCHECK,
+    HISTCMD, OPTIND.
+
+22. Bash-3.x is much stricter about $LINENO correctly reflecting the line
+    number in a script; assignments to LINENO have little effect.
+
+23. By default, readline binds the terminal special characters to their
+    readline equivalents.  As of bash-3.1/readline-5.1, this is optional and
+    controlled by the bind-tty-special-chars readline variable.
+
+24. The \W prompt string expansion abbreviates $HOME as `~'.  The previous
+    behavior is available with ${PWD##/*/}.
+
+25. The arithmetic exponentiation operator is right-associative as of bash-3.1.
+
+26. The rules concerning valid alias names are stricter, as per POSIX.2.
+
+27. The Readline key binding functions now obey the convert-meta setting active
+    when the binding takes place, as the dispatch code does when characters
+    are read and processed.
+
+28. The historical behavior of `trap' reverting signal disposition to the
+    original handling in the absence of a valid first argument is implemented
+    only if the first argument is a valid signal number.
+
+29. In versions of bash after 3.1, the ${parameter//pattern/replacement}
+    expansion does not interpret `%' or `#' specially.  Those anchors don't
+    have any real meaning when replacing every match.
+
+30. Beginning with bash-3.1, the combination of posix mode and enabling the
+    `xpg_echo' option causes echo to ignore all options, not looking for `-n'
+
+31. Beginning with bash-3.2, bash follows the Bourne-shell-style (and POSIX-
+    style) rules for parsing the contents of old-style backquoted command
+    substitutions.  Previous versions of bash attempted to recursively parse
+    embedded quoted strings and shell constructs; bash-3.2 uses strict POSIX
+    rules to find the closing backquote and simply passes the contents of the
+    command substitution to a subshell for parsing and execution.
+
+32. Beginning with bash-3.2, bash uses access(2) when executing primaries for
+    the test builtin and the [[ compound command, rather than looking at the
+    file permission bits obtained with stat(2).  This obeys restrictions of
+    the file system (e.g., read-only or noexec mounts) not available via stat.
+
+33. Bash-3.2 adopts the convention used by other string and pattern matching
+    operators for the `[[' compound command, and matches any quoted portion
+    of the right-hand-side argument to the =~ operator as a string rather
+    than a regular expression.
+
+34. Bash-4.0 allows the behavior in the previous item to be modified using
+    the notion of a shell `compatibility level'.  If the compat31 shopt
+    option is set, quoting the pattern has no special effect.
+
+35. Bash-3.2 (patched) and Bash-4.0 fix a bug that leaves the shell in an
+    inconsistent internal state following an assignment error.  One of the
+    changes means that compound commands or { ... } grouping commands are
+    aborted under some circumstances in which they previously were not.
+    This is what Posix specifies.
+
+36. Bash-4.0 now allows process substitution constructs to pass unchanged
+    through brace expansion, so any expansion of the contents will have to be
+    separately specified, and each process substitution will have to be
+    separately entered.
+
+37. Bash-4.0 now allows SIGCHLD to interrupt the wait builtin, as Posix
+    specifies, so the SIGCHLD trap is no longer always invoked once per
+    exiting child if you are using `wait' to wait for all children.  As
+    of bash-4.2, this is the status quo only when in posix mode.
+
+38. Since bash-4.0 now follows Posix rules for finding the closing delimiter
+    of a $() command substitution, it will not behave as previous versions
+    did, but will catch more syntax and parsing errors before spawning a
+    subshell to evaluate the command substitution.
+
+39. The programmable completion code uses the same set of delimiting characters
+    as readline when breaking the command line into words, rather than the
+    set of shell metacharacters, so programmable completion and readline
+    should be more consistent.
+
+40. When the read builtin times out, it attempts to assign any input read to
+    specified variables, which also causes variables to be set to the empty
+    string if there is not enough input.  Previous versions discarded the
+    characters read.
+
+41. Beginning with bash-4.0, when one of the commands in a pipeline is killed
+    by a SIGINT while executing a command list, the shell acts as if it
+    received the interrupt.  This can be disabled by setting the compat31 or
+    compat32 shell options.
+
+42. Bash-4.0 changes the handling of the set -e option so that the shell exits
+    if a pipeline fails (and not just if the last command in the failing
+    pipeline is a simple command).  This is not as Posix specifies.  There is
+    work underway to update this portion of the standard; the bash-4.0
+    behavior attempts to capture the consensus at the time of release.
+
+43. Bash-4.0 fixes a Posix mode bug that caused the . (source) builtin to
+    search the current directory for its filename argument, even if "." is
+    not in $PATH.  Posix says that the shell shouldn't look in $PWD in this
+    case.
+
+44. Bash-4.1 uses the current locale when comparing strings using the < and
+    > operators to the `[[' command.  This can be reverted to the previous
+    behavior (ASCII collating and strcmp(3)) by setting one of the
+    `compatNN' shopt options, where NN is less than 41.
+
+45. Bash-4.1 conforms to the current Posix specification for `set -u':
+    expansions of $@ and $* when there are no positional parameters do not
+    cause the shell to exit.
+
+46. Bash-4.1 implements the current Posix specification for `set -e' and
+    exits when any command fails, not just a simple command or pipeline.
+
+47. Command substitutions now remove the caller's trap strings when trap is
+    run to set a new trap in the subshell.  Previous to bash-4.2, the old
+    trap strings persisted even though the actual signal handlers were reset.
+
+48. When in Posix mode, a single quote is not treated specially in a
+    double-quoted ${...} expansion, unless the expansion operator is
+    # or % or the new `//', `^', or `,' expansions.  In particular, it
+    does not define a new quoting context.  This is from Posix interpretation
+    221.
+
+49. Posix mode shells no longer exit if a variable assignment error occurs
+    with an assignment preceding a command that is not a special builtin.
+
+50. Bash-4.2 attempts to preserve what the user typed when performing word
+    completion, instead of, for instance, expanding shell variable
+    references to their value.
+
+51. When in Posix mode, bash-4.2 exits if the filename supplied as an argument
+    to `.' is not found and the shell is not interactive.
+
+52. When compiled for strict Posix compatibility, bash-4.3 does not enable
+    history expansion by default in interactive shells, since it results in
+    a non-conforming environment.
+
+53. Bash-4.3 runs the replacement string in the pattern substitution word
+    expansion through quote removal.  The code already treats quote
+    characters in the replacement string as special; if it treats them as
+    special, then quote removal should remove them.
+
+54. Bash-4.4 no longer considers a reference to ${a[@]} or ${a[*]}, where `a'
+    is an array without any elements set, to be a reference to an unset
+    variable.  This means that such a reference will not cause the shell to
+    exit when the `-u' option is enabled.
+
+55. Bash-4.4 allows double quotes to quote the history expansion character (!)
+    when in Posix mode, since Posix specifies the effects of double quotes.
+
+56. Bash-4.4 does not inherit $PS4 from the environment if running as root.
+
+57. Bash-4.4 doesn't allow a `break' or `continue' in a function to affect
+    loop execution in the calling context.
+
+58. Bash-4.4 no longer expands tildes in $PATH elements when in Posix mode.
+
+59. Bash-4.4 does not attempt to perform a compound array assignment if an
+    argument to `declare' or a similar builtin expands to a word that looks
+    like a compound array assignment (e.g. declare w=$x where x='(foo)').
+
+60. Bash-5.0 only sets up BASH_ARGV and BASH_ARGC at startup if extended
+    debugging mode is active. The old behavior of unconditionally setting
+    BASH_ARGC and BASH_ARGV is available at compatibility levels less than
+    or equal to 44.
+
+61. Bash-5.0 doesn't allow a `break' or `continue' in a subshell to attempt
+    to break or continue loop execution inherited from the calling context.
+
+62. Bash-5.0 doesn't allow variable assignments preceding builtins like
+    export and readonly to modify variables with the same name in preceding
+    contexts (including the global context) unless the shell is in posix
+    mode, since export and readonly are special builtins.
+
+63. Bash-5.1 changes the way posix-mode shells handle assignment statements
+    preceding shell function calls. Previous versions of POSIX specified that
+    such assignments would persist after the function returned; subsequent
+    versions of the standard removed that requirement (interpretation #654).
+    Bash-5.1 posix mode assignment statements preceding shell function calls
+    do not persist after the function returns.
+
+64. Bash-5.1 reverts to the bash-4.4 treatment of pathname expansion of words
+    containing backslashes but no other special globbing characters. This comes
+    after a protracted discussion and a POSIX interpretation (#1234).
+
+65. In bash-5.1, disabling posix mode attempts to restore the state of several
+    options that posix mode modifies to the state they had before enabling
+    posix mode. Previous versions restored these options to default values.
+
+
+Shell Compatibility Level
+=========================
+
+Bash-4.0 introduced the concept of a `shell compatibility level', specified
+as a set of options to the shopt builtin (compat31, compat32, compat40,
+compat41, and so on).  There is only one current compatibility level --
+each option is mutually exclusive.  The compatibility level is intended to
+allow users to select behavior from previous versions that is incompatible
+with newer versions while they migrate scripts to use current features and
+behavior.  It's intended to be a temporary solution. 
+
+This section does not mention behavior that is standard for a particular
+version (e.g., setting compat32 means that quoting the rhs of the regexp
+matching operator quotes special regexp characters in the word, which is
+default behavior in bash-3.2 and above). 
+
+If a user enables, say, compat32, it may affect the behavior of other
+compatibility levels up to and including the current compatibility level. 
+The idea is that each compatibility level controls behavior that changed in
+that version of bash, but that behavior may have been present in earlier
+versions.  For instance, the change to use locale-based comparisons with
+the `[[' command came in bash-4.1, and earlier versions used ASCII-based
+comparisons, so enabling compat32 will enable ASCII-based comparisons as
+well.  That granularity may not be sufficient for all uses, and as a result
+users should employ compatibility levels carefully.  Read the documentation
+for a particular feature to find out the current behavior. 
+
+Bash-4.3 introduced a new shell variable: BASH_COMPAT. The value assigned
+to this variable (a decimal version number like 4.2, or an integer
+corresponding to the compatNN option, like 42) determines the compatibility
+level.
+
+Starting with bash-4.4, bash has begun deprecating older compatibility
+levels.  Eventually, the options will be removed in favor of the
+BASH_COMPAT variable. 
+
+Bash-5.0 is the final version for which there will be an individual shopt
+option for the previous version.  Users should use the BASH_COMPAT variable
+on bash-5.0 and later versions. 
+
+The following table describes the behavior changes controlled by each
+compatibility level setting.  The `compatNN' tag is used as shorthand for
+setting the compatibility level to NN using one of the following
+mechanisms.  For versions prior to bash-5.0, the compatibility level may be
+set using the corresponding compatNN shopt option.  For bash-4.3 and later
+versions, the BASH_COMPAT variable is preferred, and it is required for
+bash-5.1 and later versions. 
+
+compat31
+	- the < and > operators to the [[ command do not consider the current
+	  locale when comparing strings; they use ASCII ordering
+	- quoting the rhs of the [[ command's regexp matching operator (=~)
+	  has no special effect
+
+compat32
+	- the < and > operators to the [[ command do not consider the current
+	  locale when comparing strings; they use ASCII ordering
+	- interrupting a command list such as "a ; b ; c" causes the execution
+	  of the next command in the list (in bash-4.0 and later versions,
+	  the shell acts as if it received the interrupt, so interrupting
+	  one command in a list aborts the execution of the entire list)
+
+compat40
+	- the < and > operators to the [[ command do not consider the current
+	  locale when comparing strings; they use ASCII ordering.
+	  Bash versions prior to bash-4.1 use ASCII collation and strcmp(3);
+	  bash-4.1 and later use the current locale's collation sequence and
+	  strcoll(3).
+
+compat41
+	- in posix mode, `time' may be followed by options and still be
+	  recognized as a reserved word (this is POSIX interpretation 267)
+	- in posix mode, the parser requires that an even number of single
+	  quotes occur in the `word' portion of a double-quoted ${...}
+	  parameter expansion and treats them specially, so that characters
+	  within the single quotes are considered quoted (this is POSIX
+	  interpretation 221)
+
+compat42
+	- the replacement string in double-quoted pattern substitution is not
+	  run through quote removal, as it is in versions after bash-4.2
+	- in posix mode, single quotes are considered special when expanding
+	  the `word' portion of a double-quoted ${...} parameter expansion
+	  and can be used to quote a closing brace or other special character
+	  (this is part of POSIX interpretation 221); in later versions,
+	  single quotes are not special within double-quoted word expansions
+
+compat43
+	- the shell does not print a warning message if an attempt is made to
+	  use a quoted compound assignment as an argument to declare
+	  (declare -a foo='(1 2)'). Later versions warn that this usage is
+	  deprecated.
+	- word expansion errors are considered non-fatal errors that cause the
+	  current command to fail, even in posix mode (the default behavior is
+	  to make them fatal errors that cause the shell to exit)
+	- when executing a shell function, the loop state (while/until/etc.)
+	  is not reset, so `break' or `continue' in that function will break
+	  or continue loops in the calling context. Bash-4.4 and later reset
+	  the loop state to prevent this
+
+compat44
+	- the shell sets up the values used by BASH_ARGV and BASH_ARGC so
+	  they can expand to the shell's positional parameters even if extended
+	  debug mode is not enabled
+	- a subshell inherits loops from its parent context, so `break'
+	  or `continue' will cause the subshell to exit. Bash-5.0 and later
+	  reset the loop state to prevent the exit
+	- variable assignments preceding builtins like export and readonly
+	  that set attributes continue to affect variables with the same
+	  name in the calling environment even if the shell is not in posix
+	  mode
+
+compat50 (set using BASH_COMPAT)
+	- Bash-5.1 changed the way $RANDOM is generated to introduce slightly
+	  more randomness. If the shell compatibility level is set to 50 or
+	  lower, it reverts to the method from bash-5.0 and previous versions,
+	  so seeding the random number generator by assigning a value to
+	  RANDOM will produce the same sequence as in bash-5.0
+	- If the command hash table is empty, bash versions prior to bash-5.1
+	  printed an informational message to that effect even when writing
+	  output in a format that can be reused as input (-l). Bash-5.1
+	  suppresses that message if -l is supplied
+
+
+-------------------------------------------------------------------------------
+
+Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without any warranty.
diff --git a/COPYING b/COPYING
new file mode 100644
index 0000000..94a9ed0
--- /dev/null
+++ b/COPYING
@@ -0,0 +1,674 @@
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.  We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors.  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+  To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights.  Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received.  You must make sure that they, too, receive
+or can get the source code.  And you must show them these terms so they
+know their rights.
+
+  Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+  For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software.  For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+  Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so.  This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software.  The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable.  Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products.  If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+  Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary.  To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                       TERMS AND CONDITIONS
+
+  0. Definitions.
+
+  "This License" refers to version 3 of the GNU General Public License.
+
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
+
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+  1. Source Code.
+
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
+
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+  The Corresponding Source for a work in source code form is that
+same work.
+
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+  13. Use with the GNU Affero General Public License.
+
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+  14. Revised Versions of this License.
+
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+  If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+  15. Disclaimer of Warranty.
+
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+  If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
+
+    <program>  Copyright (C) <year>  <name of author>
+    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
+
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+<http://www.gnu.org/licenses/>.
+
+  The GNU General Public License does not permit incorporating your program
+into proprietary programs.  If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.  But first, please read
+<http://www.gnu.org/philosophy/why-not-lgpl.html>.
diff --git a/CWRU/PLATFORMS b/CWRU/PLATFORMS
new file mode 100644
index 0000000..f05caff
--- /dev/null
+++ b/CWRU/PLATFORMS
@@ -0,0 +1,31 @@
+The version of bash in this directory has been compiled on the
+following systems:
+
+By chet:
+
+SunOS 4.1.4
+SunOS 5.5
+BSDI BSD/OS 2.1
+FreeBSD 2.2
+NetBSD 1.2
+AIX 4.2
+AIX 4.1.4
+HP/UX 9.05, 10.01, 10.10, 10.20
+Linux 2.0.29 (libc 5.3.12)
+Linux 2.0.4 (libc 5.3.12)
+
+By other testers:
+
+SCO ODT 2.0
+SCO 3.2v5.0, 3.2v4.2
+SunOS 5.3
+SunOS 5.5
+BSD/OS 2.1
+FreeBSD 2.2
+SunOS 4.1.3
+Irix 5.3
+Irix 6.2
+Linux 2.0 (unknown distribution)
+Digital OSF/1 3.2
+GNU Hurd 0.1
+SVR4.2
diff --git a/CWRU/README b/CWRU/README
new file mode 100644
index 0000000..7d7ca1a
--- /dev/null
+++ b/CWRU/README
@@ -0,0 +1,20 @@
+Contents of this directory:
+
+changelog		- my change log since the last release
+
+POSIX.NOTES		- list of what changes for `posix mode'
+
+README			- this file
+
+misc			- directory with some useful tools
+
+The following are distributed `as-is'.  They will not apply without some
+modification.
+
+sh-redir-hack		- diff to parse.y to get redirections before
+			  compound commands
+
+empty-for-wordlist	- diff to parse.y to allow an empty wordlist after
+			  the `in' keyword in a `for' statement
+
+mh-folder-comp		- diffs that reportedly add MH folder completion
diff --git a/CWRU/changelog b/CWRU/changelog
new file mode 100644
index 0000000..27f62c0
--- /dev/null
+++ b/CWRU/changelog
@@ -0,0 +1,9182 @@
+
+				 9/15/2016
+				 ---------
+[bash-4.4 released]
+
+				   9/17
+				   ----
+builtins/common.c
+	- display_signal_list: if 0 is supplied as an argument to kill -l,
+	  display a signal-out-of-range error.  Fixes bug reported by
+	  Martijn Dekker <martijn@inlv.org>
+
+				   9/18
+				   ----
+print_cmd.c
+	- print_heredoc_bodies: take a list of redirections, all here documents,
+	  and print the here-document bodies including the ending delimiter,
+	  followed by a newline
+	- print_redirection_list: print the heredoc headers the first time
+	  through the list of redirections so we print them in the same left-
+	  to-right order they're supplied; print the bodies and delimiters with
+	  print_heredoc_bodies after we print all the redirections if we're
+	  not printing a list of commands (printing_connection == 0).  Fix for
+	  problem reported by Isabella Parakiss <izaberina@gmail.com>
+	- print_deferred_heredocs: don't print heredoc headers, since they're
+	  now printed in print_redirection_list
+	- print_deferred_heredocs: use print_heredoc_bodies
+
+				   9/20
+				   ----
+builtins/mapfile.def
+	- readarray: update usage synopsis to include -d delim.  Report and
+	  fix from jhankins@homewood.k12.al.us
+
+test.c
+	- test_binop: if op[0] == '-', make sure op[1] != 0 before checking
+	  op[2] or op[3].  Fixes out-of-bounds read reported by Franco
+	  Costantini <franco.costantini.20@gmail.com>
+
+parse.y
+	- cond_term: if yylval.word->word[0] == '-' make sure word[1] != 0
+	  before checking word[2] and calling test_unop.  Fixes out-of-bounds
+	  read reported by Franco Costantini <franco.costantini.20@gmail.com>
+	- make sure to check all instances of the return value of the
+	  simple_command production before trying to hook redirections onto it,
+	  since it can potentially return NULL.
+	  Reported by Franco Costantini <franco.costantini.20@gmail.com>
+
+				   9/21
+				   ----
+parse.y
+	- token_is_assignment: make sure to check that the return value from
+	  assignment() finds the `=' we just added at index I to avoid false
+	  positives from g=g=g=g=g=g=().  Reported by Franco Costantini
+	  <franco.costantini.20@gmail.com>
+
+				   9/22
+				   ----
+parse.y
+	- token_is_assignment: if we're not using the bash malloc (which has
+	  guard bytes after the requested allocation size), use a new
+	  buffer so we can make sure it's big enough to hold the current
+	  token and at least two additional characters.  Reported by
+	  Franco Costantini <franco.costantini.20@gmail.com>
+
+				   9/23
+				   ----
+execute_cmd.c
+	- execute_in_subshell: call without_job_control for both job control
+	  and non-job-control builds to avoid waiting for last_made_pid
+	  inherited from parent shell.  Related to fix from 8/4 to
+	  initialize_subshell.  Fixes bug reported by Martijn Dekker
+	  <martijn@inlv.org>
+
+builtins/declare.def
+	- local_builtin: allow `local --help' to work even when not executing
+	  a function. Suggestion from Norm Abramovitz <norm@starkandwayne.com>
+
+				   9/25
+				   ----
+builtins/printf.def
+	- bexpand: if passed a null or empty string, return a newly-allocated
+	  empty string (so the return value can always be freed) instead of
+	  NULL.
+	- printstr: if passed a null string, treat it as if it were an empty
+	  string so any precision or fieldwidth arguments are handled
+	  correctly.  Report from isabella parakiss <izaberina@gmail.com>
+
+subst.c
+	- skip_matched_pair: make the flags argument of 1 affect whether or
+	  not backslash can quote characters in the string, so it affects
+	  all quoting mechanisms
+
+arrayfunc.c
+	- unbind_array_element: now takes a third (flags) argument; flags&1
+	  means to not expand an associative array index. This is only called
+	  from a shell builtin context, which means the argument should have
+	  already undergone word expansion, so it should be ok.  Will still
+	  be a problem for uses like "unset -v 'var[$ind]'", quoted to avoid
+	  globbing
+	- valid_array_reference: pass second flags argument to skipsubscript;
+	  still set to 0 by all callers
+
+arrayfunc.h
+	- unbind_array_element: updated prototype
+
+builtins/set.def
+	- unset_builtin: add third argument of 1 to unbind_array_element calls
+	  [TEMPORARILY DISABLED]
+	- unset_builtin: call valid_array_reference with second arg of 1 to
+	  handle unmatched pairs of quotes and [/]
+
+array.c
+	- array_reference: optimize access locality as well as sequential
+	  access by adding ability to start from last-accessed element and move
+	  backwards or forwards depending on the desired index.  Inspired by
+	  report from Tom McCurdy <tom.j.mccurdy@gmail.com> and followup from
+	  Christian Franke <Christian.Franke@t-online.de>
+
+variables.c
+	- all_array_variables: include associative arrays, not just indexed
+	  arrays.  Reported by Grisha Levit <grishalevit@gmail.com>
+
+execute_cmd.c
+	- execute_disk_command: if we're optimizing out the fork (CMD_NO_FORK),
+	  decrement the shell level so we don't end up incrementing it twice.
+	  We should decrement the shell level for an implicit exec like an
+	  explicit one.  Reported by Stephane Chazelas
+	  <stephane.chazelas@gmail.com>
+
+builtins/exec.def
+	- exec_builtin: don't bother to decrement the shell level if we are
+	  already in a `(command)' subshell.  Reported by Stephane Chazelas
+	  <stephane.chazelas@gmail.com>
+
+lib/readline/macro.c
+	- macro_level: count of macro nesting level, maintained by
+	  _rl_push_executing_macro and _rl_pop_executing macro
+	- _rl_with_macro_input: if current nesting level exceeds
+	  MAX_MACRO_LEVEL, abort the current command line with _rl_abort_internal
+	  and return to the top level.  Reported by Christian Klomp
+	  <christianklomp@gmail.com>
+
+lib/readine/history.c
+	- add_history: if allocating the history list for the first time,
+	  make sure the max history list size isn't so large that it will
+	  cause allocation errors.  Cap it at MAX_HISTORY_INITIAL_SIZE
+	  (8192).  Reported by Sean Zha <freeman_cha@hotmail.com>
+
+jobs.c
+	- wait_for: if a foreground job with job control enabled is killed by a
+	  SIGINT and sourcelevel != 0, act as if we received the SIGINT so the
+	  file sourcing can be terminated.  Reported by PePa
+	  <peterkelly@passchier.net>
+
+				   9/26
+				   ----
+subst.c
+	- read_comsub: only warn once for null bytes in command substitution
+	  output, instead of once for every null byte
+
+arrayfunc.c
+	- array_variable_part: now takes a `flags' argument; changed all callers
+	  to initially pass 0
+	- array_variable_name: now takes a `flags' argument; changed all callers
+	  to initially pass 0
+	- array_variable_name: pass `flags' argument to skipsubscript instead
+	  of just passing 0
+
+arrayfunc.h
+	- array_variable_{name,part}: added new argument to prototypes
+
+				   9/29
+				   ----
+bashline.c
+	- bash_directory_completion_hook: don't bother to try and expand a
+	  ${ or $( that isn't complete; expand_prompt_string will complain.
+	  Fixes reports from John Passaro <john.a.passaro@gmail.com> and
+	  Valentin Bajrami <valentin.bajrami@gmail.com>
+
+lib/readline/history.c
+	- _hs_append_history_line: use a strategy that attempts to avoid
+	  realloc copying memory to a newly-allocated block if the history
+	  line we're appending to gets `too long' (currently 256 bytes).
+	  We reallocate in powers of 2 starting at 512, and rely on realloc
+	  not allocating a new block and copying into it if the size is the
+	  same as the last call to realloc.  Addresses issue raised by
+	  Hubert Schmid <h.schmid@gmx.de>
+
+trap.h
+	- check_signals: new extern declaration
+	- trapped_signal_received: new extern declaration
+
+builtins/read.def
+	- read_builtin: if one of the zread* functions returns < 0 (which
+	  usually only happens in Posix mode), make sure we call check_signals()
+	  before eventually calling run_pending_traps() because zread() isn't
+	  going to call it
+	- include trap.h for correct extern functions and variable declarations
+
+lib/sh/zread.c
+	- zread: if executing a builtin, call check_signals_and_traps() for
+	  backwards compatibility.  If not, call check_signals() only, because
+	  we don't want to run traps during, for instance, reading command
+	  substitution output.  Fixes race condition bug reported by Luiz Angelo
+	  Daros de Luca <luizluca@gmail.com>
+
+				   9/30
+				   ----
+subst.c
+	- command_substitute: reset parse_and_execute_level to 0 in the child
+	  process, since it's independent of the other parse_and_execute
+	  calls.  Adds command substitution inside other parse_and_execute
+	  calls optimizations to suppress forks, as suggested by
+	  Martijn Dekker <martijn@inlv.org>
+
+				   10/3
+				   ----
+configure.ac
+	- SHOBJ_STATUS: make sure it defaults to unsupported and is substituted
+	  if the shobj-conf script isn't run.  Fixes `make install' bug with
+	  a minimal config reported by Andrew Tomazos <andrewtomazos@gmail.com>
+
+				   10/5
+				   ----
+support/shobj-conf
+	- darwin: set compatibility_version for a shared build of the readline
+	  library (the standalone readline distribution shares this file) to
+	  $(SHLIB_MAJOR)$(SHLIB_MINOR).  Recommendation from Max Horn
+	  <max@quendi.de>
+
+				   10/6
+				   ----
+array.h
+	- array_first_index: new convenience define
+
+array.c
+	- ADD_AFTER: new define, complement of ADD_BEFORE
+	- UNSET_LASTREF: now takes an array as an argument, prepping for move
+	  of lastref pointer into the array struct
+	- array_insert: check whether we are adding at the beginning of the
+	  array and take a fast path if so
+	- array_insert: use same strategy as array_reference to find the place
+	  to insert, starting from the last-referenced element and moving
+	  forward or back from there; use ADD_AFTER if moving backward
+	- array_insert: if replacing an existing element, just replace the
+	  value with new->value instead of the entire element
+	- array_reference: short-circuit quickly if looking for an element
+	  before the first assigned index
+	- array_reference: if we don't find the element, leave lastref pointing
+	  to the closest element under the assumption we will be assigning or
+	  looking for something close
+	- array_reference: take advantage of ordered indexes to short-circuit
+	  when looking for element that is not set
+
+				   10/7
+				   ----
+array.c
+	- array_remove: short-circuit if asked to remove index after max
+	  index or before first index
+
+				   10/10
+				   -----
+lib/malloc/malloc.c
+	- internal_realloc: if we are requesting reallocation to the same size
+	  as the block's current size, short-circuit and return `mem' right
+	  after doing bounds check
+	- internal_realloc: if we are reducing the size of an allocation, and
+	  the new size fits in the next lower bin, just keep the same block
+	  and adjust the size, so we can avoid some copies
+
+parse.y
+	- set_line_mbstate: keep track of the allocated size of
+	  shell_input_line_property, only request reallocation if the size
+	  increases, but don't let it get too big
+
+				   10/11
+				   -----
+jobs.c
+	- wait_for_background_pids: make sure we wait for pid in
+	  last_procsub_child since it's not found in any job -- still needs
+	  more work to wait for multiple process substitutions
+
+subst.c
+	- process_substitute: if make_child fails, make sure we call
+	  restore_pipeline to undo the previous save_pipeline()
+
+				   10/15
+				   -----
+subst.c
+	- process_substitute,command_substitute: leave subshell_level (reflected
+	  as $BASH_SUBSHELL) intact for any exit trap instead of decrementing
+	  it.  Suggested by Martijn Dekker <martijn@inlv.org>
+
+builtins/evalstring.c
+	- optimize_subshell_command: new function, framework for optimizing
+	  out forks for command that have already forked and are executing
+	  in a subshell. Not used yet
+
+expr.c
+	- readtok: if we have a post-increment or post-decrement, and the
+	  previous token is not a string, check whether the previous token is
+	  a number that results from a pre-increment or pre-decrement, and
+	  make that an error.  Report from Conrad Hoffmann <ch@bitfehler.net>
+
+				   10/16
+				   -----
+aclocal.m4
+	- BASH_JOB_CONTROL_MISSING: convert from AC_TRY_RUN to AC_TRY_COMPILE
+	  with existing set of preprocessor defines, so it can work when
+	  cross-compiling.  Suggested by Felix Janda <felix.janda@posteo.de>
+
+				   10/19
+				   -----
+variables.c
+	- get_bashpid: BASHPID is no longer readonly; assignments to it are
+	  just ignored.
+
+doc/{bash.1,bashref.texi}
+	- BASHPID: note that assignments are ignored and unsetting BASHPID
+	  causes it to lose its special properties
+
+				   10/28
+				   -----
+builtins/pushd.def
+	- popd_builtin: make sure to check the normalized stack offset
+	  (i.e., negatives counting back from the end of the stack) is within
+	  bounds before trying to free that stack entry.  Report from
+	  Fernando Muñoz <fernando@null-life.com>
+
+lib/readline/histfile.c
+	- chown: protect calls with HAVE_CHOWN.  Fixes for MinGW{64,32} from
+	  J. Peter Mugaas <jpmugaas@suddenlink.net>
+
+lib/readline/colors.c
+	- S_ISDIR: add define if missing
+	- S_ISUID, S_ISGID, S_ISLNK, S_ISSOCK: don't use unless defined.
+	  Fixes for MinGW{64,32} from J. Peter Mugaas <jpmugaas@suddenlink.net>
+
+bashhist.c
+	- current_command_line_comment: set to the most recent line in a
+	  possibly multi-line command that contains a shell comment; set in
+	  maybe_add_history and bash_add_history to either the current
+	  command number or -2
+	- maybe_add_history: set current_command_line_comment for first line
+	  of command
+	- bash_add_history: chars_to_add set to "\n" if the current command line
+	  is one greater than the previous line containing a comment
+	  (current_command_line_comment).  Fixes complaint from back in
+	  January, 2016 from Dave Rutherford <dave@evilpettingzoo.com>
+
+array.h
+	- lastref: move last-referenced pointer into each array struct, so all
+	  arrays can have reference locality
+
+array.c
+	- array_create: set lastref element to 0
+	- array_copy: if copying the lastref in array a, set the new lastref
+	  in the copy to the same element
+	- IS_LASTREF, LASTREF_START, LASTREF, INVALIDATE_LASTREF, SET_LASTREF,
+	  UNSET_LASTREF: change to use new array `lastref' member
+
+pathexp.c
+	- quote_string_for_globbing: if quoting for a regexp, make sure to
+	  skip and copy a leading `^' in a bracket expression, and skip and
+	  copy a subsequent `]' (after an optional `^'), so that leading
+	  bracket doesn't close the bracket expression.  Report from
+	  Stephane Chazelas <stephane.chazelas@gmail.com>
+
+				   10/29
+				   -----
+subst.c
+	- extract_delimited_string: add calls to CHECK_STRING_OVERRUN for
+	  $( inside $((, nested OPENERs, nested ALT_OPENERs, and backquotes
+	- skip_to_delim: add calls to CHECK_STRING_OVERRUN for $(, ${,
+	  process substitution
+	- extract_dollar_brace_string: add calls to CHECK_STRING_OVERRUN for
+	  $(
+	- extract_dollar_brace_string: use skipsubscript to skip over the
+	  array subscript in ${var[sub]} (non-quoted case uses string_extract,
+	  which already uses skipsubscript).  Tagged for bash-5.0
+
+				   10/30
+				   -----
+variables.c
+	- EPOCHSECONDS: new dynamic variable, time in seconds since Unix
+	  epoch; assignments are ignored.  Can be used on systems where
+	  strftime() doesn't support '%s'
+	- EPOCHREALTIME: new dynamic variable, time in seconds since Unix
+	  epoch with microsecond granularity
+
+doc/{bash.1,bashref.texi}
+	- EPOCHSECONDS documentation
+	- EPOCHREALTIME documentation
+
+execute_cmd.c
+	- decpoint: moved to locale.c, renamed locale_decpoint; changed callers
+
+{bashintl,externs}.h
+	- locale_decpoint: extern declaration or #define if support for
+	  localeconv() not there
+
+				   10/31
+				   -----
+lib/malloc/malloc.c
+	- posix_memalign: add new posix-mandated interface
+
+examples/loadables/rm.c
+	- rm: minimal loadable builtin, removes files and directories, only
+	  handles -r and -f options.  Original from Tim Ruehsen
+	  <tim.ruehsen@gmx.de>, heavily rewritten for inclusion as loadable
+
+examples/loadables/Makefile.in
+	- rm: add rules to build rm as one of the `other' targets
+
+examples/loadables/stat.c
+	- stat: new loadable builtin that takes a filename and loads the info
+	  returned by stat(2) into an associative array specified by the -A
+	  argument (default STAT)
+
+				   11/1
+				   ----
+variables.c
+	- BASH_ARGV0: new dynamic variable, returns $0 on reference and sets
+	  $0 on assignment.  From a suggestion from  Rocky Bernstein <rocky@gnu.org>
+	  a few years ago
+
+doc/{bash.1,bashref.texi}
+	- BASH_ARGV0: document
+
+				   11/2
+				   ----
+lib/glob/sm_loop.c
+	- parse_collsym: make sure to not return an out-of-bounds read if a
+	  collating symbol is unterminated.  Fixes OOB read reported by
+	  Jerzy Kramarz <op7ica@gmail.com>
+	- brackmatch: after incrementing p, before checking whether it's a
+	  character range, check whether *p was NULL before the increment
+	  and short-circuit the bracket expression if it is
+
+jobs.c
+	- discard_last_procsub_child: new function, safely discards
+	  last_procsub_child and sets it to NULL
+
+subst.c
+	- process_substitute: call discard_last_procsub_child instead of
+	  calling discard_pipeline directly.  Fixes bug reported by
+	  Christian Weisgerber <naddy@mips.inka.de>
+
+				   11/3
+				   ----
+shell.h
+	- EX_DISKFALLBACK: new special return status available to builtins;
+	  means to attempt to execute a disk command with the same name as
+	  the builtin
+
+examples/loadables/rm.c
+	- if we see the -i option, return EX_DISKFALLBACK
+
+execute_cmd.c
+	- execute_simple_command: if executing a builtin returns EX_DISKFALLBACK,
+	  try running execute_disk_command instead 
+
+bashline.c
+	- shell_expand_line: use expand_word to expand the readline line
+	  buffer, which allows us to pass flags with the word. If a numeric
+	  argument is supplied, do not perform quote removal (pass
+	  Q_HERE_DOCUMENT since here-doc quoting does the right thing) and
+	  do not perform command or process subsitution.  From a suggestion
+	  by Dabrien 'Dabe' Murphy <dabe@dabe.com> based on an old bug-bash
+	  discussion
+
+subst.c
+	- expand_word_internal: note that we have added a quoted IFS char to
+	  istring by setting sentinel has_quoted_ifs.  Usually we only add
+	  one if we are not going to be performing word splitting, but we
+	  will not perform word splitting if there's no expansion, so we need
+	  to take care of that case
+	- expand_word_internal: when performing final word split, if there are
+	  no expansions but has_quoted_ifs is non-zero, call remove_quoted_ifs()
+	  to remove any quoted ifs characters we added while processing
+	- remove_quoted_ifs: new function, removes CTLESC chars preceding
+	  (single-byte) chars in IFS. Used when we are not performing word
+	  splitting.  Fixes bug reported by Martijn Dekker <martijn@inlv.org>
+
+				   11/4
+				   ----
+lib/readline/macro.c
+	- _rl_peek_macro_key: return the next character from the current
+	  keyboard macro; the next character from the `next' keyboard macro,
+	  if there is one, if at the end of the current macro; or 0 to
+	  indicate that we are at the end of a keyboard macro sequence
+
+lib/readline/rlprivate.h
+	- _rl_peek_macro_key: extern declaration
+
+lib/readline/readline.c
+	- _rl_dispatch_subseq: add test for ESC at the end of a keyboard macro,
+	  which should cause the keyboard timeout for ESC to kick in.  The
+	  previous test didn't run the timeout code if executing from a macro,
+	  even if we had read the last character of the macro.  Fixes bug
+	  reported by Clark Wang <clarkw@vmware.com>
+
+lib/glob/sm_loop.c
+	- GMATCH: allow trailing backslash in pattern to explicitly match a
+	  backslash that is the last character in the string.  Bug report from
+	  Stephane Chazelas <stephane.chazelas@gmail.com>
+
+				   11/5
+				   ----
+builtins/common.c
+	- display_signal_list: if displaying a signal name corresponding to an
+	  exit status > 128, don't display the SIG prefix at all.  Old code
+	  made displaying the SIG prefix dependent on JOB_CONTROL define.
+	  Report and fix from Martijn Dekker <martijn@inlv.org>
+
+execute_cmd.c
+	- execute_subshell_builtin_or_function: call without_job_control even
+	  if JOB_CONTROL is not defined. Similar to fix from 9/23.
+	  Report from Martijn Dekker <martijn@inlv.org>
+
+execute_cmd.c
+	- execute_simple_command: free memory allocated and passed to
+	  make_child in the child process if JOB_CONTROL is defined
+	- execute_command_internal: free memory allocated and passed to
+	  make_child in the child process created to run a () subshell or a
+	  compound command within a pipeline if JOB_CONTROL is defined
+	- execute_coproc: free memory allocated and passed to make_child in
+	  the child process if JOB_CONTROL is defined
+	- execute_disk_command: free memory allocated and passed to
+	  make_child in the child process if JOB_CONTROL is defined.  This
+	  series of fixes is the result of reports from
+	  Eduardo A. Bustamante López <dualbus@gmail.com>
+
+				   11/6
+				   ----
+lib/sh/unicode.c
+	- u32toutf16: fix to prevent outputting broken surrogate pairs for
+	  Japanese locales (ja_JP.UTF-8) on cygwin (which uses UTF-16 natively).
+	  Report and fix from Koichi MURASE <myoga.murase@gmail.com>
+
+builtins/trap.def
+	- trap_builtin: if OP is `-' (revert), set the SIGINT signal handler
+	  to sigint_sighandler if the shell is interactive and sourcing a
+	  file (interactive_shell && sourcelevel) or running a trap
+	  (interactive_shell && running_trap) even if it's not currently
+	  interactive.  Report from Martijn Dekker <martijn@inlv.org>
+
+builtins/read.def
+	- check for and read multibyte characters in all cases, not just when
+	  we are reading a specific number of characters, as long as
+	  mb_cur_max > 1
+
+subst.c
+	- expand_word_internal: some improvements to code that converts istring
+	  into a WORD_LIST * to avoid multiple allocations and copies of
+	  istring, which is already malloc'ed memory -- reduce number of malloc
+	  and free calls
+
+test.c
+	- unary_test: make sure if we test -v array[@] or array[*] that we
+	  free the return value from array_value
+
+				   11/8
+				   ----
+expr.c
+	- expcond: make sure to set `noeval' before reading tokens depending on
+	  the result of the conditional test, since readtok() can evaluate
+	  identifiers (and recursively those containing expressions).  Report
+	  and fix from Koichi MURASE <myoga.murase@gmail.com>
+
+builtins/evalstring.c
+	- should_suppress_fork: make sure to check for traps on EXIT and
+	  ERR, since any_signals_trapped() only checks for `real' signals,
+	  not the fake shell ones.  Fixes bug reported by Werner Fink
+	  <werner@suse.de>
+	- optimize_subshell_command: ditto
+
+				   11/9
+				   ----
+eval.c
+	- reader_loop: change so that we don't reset the SIGINT handler every
+	  time through the command loop in an interactive shell if the signal
+	  is trapped (as the comment noted).  Reported by Report from Martijn
+	  Dekker <martijn@inlv.org>
+
+subst.c
+	- parameter_brace_{patsub,remove_pattern,transform,casemod}: save and
+	  restore this_command_name while temporarily setting it for use in
+	  error messages.  Fixes use-after-free error reported by
+	  Jerzy Kramarz <op7ica@gmail.com>
+	- string_extract_verbatim: make sure when we increment i by 2 due to
+	  a CTLESC or CTLESC-CTLNUL that we don't read past the end of the
+	  string. This can happen if the string ends with an odd number of
+	  CTLESC chars. Fixes oob-read error reported by
+	  Jerzy Kramarz <op7ica@gmail.com>
+
+				   11/11
+				   -----
+configure.ac,aclocal.m4
+	- BASH_FUNC_SBRK: make sure sbrk actually works, instead of being just
+	  a stub function like on several Linux distributions
+
+lib/malloc/malloc.c
+	- malloc_usable_size: return the maximum number of bytes available for
+	  a particular memory allocation (size of block allocated for it)
+
+				   11/12
+				   -----
+configure.ac
+	- changes to make --enable-profiling work on Linux (-pg, no static link,
+	  no -static in LDFLAGS)
+
+Makefile.in
+	- changes to make --enable-profiling work on Linux (take
+	  ${PROFILE_FLAGS} out of  BASE_CCFLAGS, add to CCFLAGS instead; add
+	  BASE_LDFLAGS define that doesn't include -pg or -static; use
+	  BASE_LDFLAGS in LDFLAGS; move ${PROFILE_FLAGS} and ${STATIC_LD} to
+	  LDFLAGS)
+
+tests/run-gprof
+	- changes to make profiling test suite with gprof work on Linux (set
+	  GMON_OUT_PREFIX to handle multiple profiled processes per test;
+	  change default filename to gmon.out from bash.gmon; look for
+	  gprof output files in ${TMPDIR} instead of /tmp; handle multiple
+	  profiling files starting with $GMON_OUT_PREFIX)
+
+locale.c
+	- locale_isutf8: use locale_charset() if it's available and nl_langinfo
+	  isn't
+	- locale_isutf8: add code to parse a locale specification and determine
+	  whether the encoding is UTF-8 (or utf8) in the absence of
+	  nl_langinfo and locale_charset
+	- set_default_locale: make sure to set locale_utf8locale early on
+	- locale_utf8locale: set via call to locale_isutf8 wherever LANG,
+	  LC_ALL, or LC_CTYPE is set
+
+				   11/13
+				   -----
+lib/readline/display.c
+	- rl_redisplay: handle report of potential integer overflow in
+	  horizontal display mode from Mateusz Lenik <mlen@mlen.pl>
+
+lib/sh/mbschr.c
+	- mbschr: if in a UTF-8 locale (locale_utf8locale) and we are looking
+	  for an ASCII character, use (essentially) strchr as a shortcut
+
+lib/sh/shmbchar.c
+	- utf8_{mbstrlen,mblen,mbsmbchar,mbsnlen}: UTF-8-specific replacement
+	  functions (should also be able to use utf8_mblen in subst.c:
+	  string_extract_verbatim)
+	- mbsmbchar: if locale_utf8locale is true, call utf8_mbsmbchar
+	- mbsmbchar: in UTF-8 locale, use utf8_mblen instead of mbrlen (not
+	  used if earlier shortcut taken)
+
+lib/sh/unicode.c
+	- u32cconv: don't use nl_langinfo early to call u32toutf8()
+	- u32cconv: use locale_utf8locale to set utf8locale
+	- u32cconv: when initializing (u32init == 0), use locale_charset, then
+	  nl_langinfo, then stub_charset to determine the charset
+	- u32cconv: even if we don't have iconv, if locale_utf8locale is non-
+	  zero, return u32toutf8
+
+				   11/15
+				   -----
+lib/readline/nls.c
+	- _rl_init_locale: new function, split off code that determines current
+	  locale from _rl_init_eightbit, use it to set _rl_utf8locale
+
+lib/readiline/rlprivate.h
+	- _rl_init_locale: new extern declaration
+
+lib/readline/readline.c
+	- rl_initialize: if not initializing everything the first time, call
+	  _rl_init_locale to check current locale and set _rl_utf8locale
+
+lib/readline/text.c
+	- _rl_insert_char: optimize cases where we are inserting a single-byte
+	  character in a locale with multibyte characters
+	- _rl_insert_char: check whether character is single byte if we know
+	  we are in a UTF-8 locale, optimize single-byte case to avoid calls
+	  to mbrtowc and memmove/memcpy
+
+lib/readline/mbutil.c
+	- _rl_char_value: if we are in a UTF-8 locale (_rl_utf8locale) and the
+	  current character does not have the eighth bit set ((c & 0x80) == 0),
+	  return that char without bothering to call mbrtowc
+	- _rl_adjust_point: don't bother calling mbrlen if we are in a UTF-8
+	  locale and the current character is not a multibyte character
+	- _rl_find_next_mbchar_internal: if we are in a UTF-8 locale, use that
+	  to avoid calls to mbrtowc
+
+lib/readline/display.c
+	- _rl_col_width: if in a UTF-8 locale, take advantage of that to avoid
+	  calls to mbrlen and mbrtowc
+	- rl_redisplay: if in a UTF-8 locale, take advantage of that to avoid
+	  calls to mbrtowc
+
+				   11/17
+				   -----
+lib/readline/histlib.h
+	- PATTERN_SEARCH: new flag for history search interfaces, means to
+	  search for a pattern as Posix specifies
+
+lib/readline/histsearch.c
+	- history_search_internal: now takes a `flags' argument instead of just
+	  an `anchored' argument to accommodate PATTERN_SEARCH
+	- _hs_history_patsearch: new internal interface to use when flags
+	  specify PATTERN_SEARCH
+
+lib/readline/rlprivate.h
+	- SF_PATTERN: new flag for non-incremental search contexts, means to
+	  treat search string as a pattern (maps to PATTERN_SEARCH)
+
+lib/readline/search.c
+	- noninc_dosearch: takes an additional `flags' argument for SF_PATTERN
+	- noninc_search_from_pos: takes an additional `flags' argument for
+	  SF_PATTERN
+	- noninc_dosearch: pass flags argument through to noninc_search_from_pos
+	- _rl_nsearch_init: if we are in vi command mode, and `pchar' (key used
+	  to invoke the search) is `?' or `/', add SF_PATTERN to the flags
+	  to conform to Posix spec for vi-mode editing
+	- _rl_nsearch_dosearch: if cxt->sflags indicates that we should do a
+	  pattern search, pass SF_PATTERN to noninc_search_from_pos
+	- rl_noninc_forward_search_again: if in vi command mode and key == `N',
+	  make sure flags arg passed to noninc_dosearch includes SF_PATTERN
+	- rl_noninc_reverse_search_again: if in vi command mode and key == `n',
+	  make sure flags arg passed to noninc_dosearch includes SF_PATTERN
+	- rl_history_search_internal: pass extra flags arg to noninc_search_from_pos
+
+				   11/18
+				   -----
+lib/readline/search.c
+	- noninc_search_from_pos: takes a new argument, a pointer to int where
+	  it stores the offset of the match in the history line (if non-NULL),
+	  modified callers
+	- rl_history_search_internal: pass newcol pointer to
+	  noninc_search_from_pos to avoid having to recompute the match offset
+	  in the matching history entry
+
+config.h.in
+	- define HAVE_FNMATCH if we have the fnmatch function (configure was
+	  already checking for it)
+
+lib/readline/histsearch.c
+	- _hs_history_patsearch: transform the pattern into one ending in a
+	  `*' to avoid having to perform multiple match attempts from each
+	  index in the history line
+	- history_search_internal: changes to handle pattern matching if
+	  PATTERN_SEARCH is in the flags and HAVE_FNMATCH is defined.  This
+	  makes vi-mode history searching treat the user-specified search
+	  string as an fnmatch pattern, as Posix requires.  Fixes issue
+	  reported by <jwdevel@gmail.com>
+
+				   11/19
+				   -----
+builtins/shopt.def
+	- shopt_enable_hostname_completion: only declare this if READLINE
+	  defined, since that's the only time it's used.  Reported by
+	  isabella parakiss <izaberina@gmail.com>
+
+				   11/20
+				   -----
+builtins/common.c
+	- display_signal_list: make `kill -l 0' print `EXIT', modifying change
+	  from 9/17
+
+				   11/21
+				   -----
+subst.c
+	- expand_word_internal: when the shell encounters a backslash as the
+	  last character of the string, don't try to add a '\'0' to the end
+	  of the string if the string is quoted, just add a <CTLESC><\> and
+	  skip to the end of string processing.  Fixes oob-read error
+	  reported by Jerzy Kramarz <op7ica@gmail.com>
+
+test.c
+	- two_arguments: check argv[pos][1] before checking argv[pos][2] when
+	  looking for a unary argument.  Fixes oob-read error on single `-'
+	  in unary operator position reported by Jerzy Kramarz
+	  <op7ica@gmail.com>
+	- ANDOR: check s[1] before checking s[2] in case s[1] == end of string.
+	  Fixes oob-read error reported by Jerzy Kramarz <op7ica@gmail.com>
+
+subst.c
+	- command_substitute: now takes additional flags argument, changed one
+	  caller (param_expand) to pass through PF_ASSIGNRHS flag; other callers
+	  pass 0
+	- command_substitute: pass through flags argument to read_comsub
+	- read_comsub: now takes additional new flags argument to indicate
+	  whether or not the word is in a context where word splitting will
+	  eventually be performed
+	- read_comsub: if we are running in a context where word splitting
+	  will not take place (PF_ASSIGNRHS), we read a CTLESC, and CTLESC is
+	  in $IFS, add a CTLESC to make sure it gets through a round of
+	  dequoting
+
+				   11/23
+				   -----
+parse.y
+	- xparse_dolparen: since reset_parser frees the pushed string list,
+	  and this is supposed to be a separate parsing context, we need to
+	  save and restore pushed_string_list around the call to parse_string
+	  and reset_parser.  Fixes bug reported by Dan Douglas
+	  <ormaaj@gmail.com>
+
+bashhist.h
+	- HISTEXPAND_DEFAULT: default value of history_expansion, moved here
+	  from flags.c
+
+flags.[ch]
+	- histexp_flag: new variable, this is what set -H/set -o histexpand
+	  sets; history_expansion set to value of this variable; defaults to 0
+	- history_expansion: now set to HISTEXPAND_DEFAULT
+
+bashhist.c
+	- bash_history_reinit: if interact == 0, set history_expansion to the
+	  value of histexp_flag, to allow -H option to enable history
+	  expansion
+	- bash_history_reinit: if interact == 0, make sure
+	  history_expansion_inhibited is set opposite of histexp_flag, so
+	  enabling history expansion with -H invocation option turns off
+	  inhibited expansion. If interactive shell, we turn it off so
+	  history_expansion controls whether or not history expansion takes
+	  place. In practice, this function is always called with interact == 0,
+	  and -c command still doesn't perform history expansion
+
+shell.c
+	- init_interactive: make sure histexp_flag and history_expansion are
+	  identical in an interactive shell; allows both -H/+H option and
+	  default compilation options (HISTEXPAND_DEFAULT) to work
+
+				   11/24
+				   -----
+subst.c
+	- get_word_from_string: take advantage of the fact that SEPARATORS is
+	  always a (possibly local) copy of IFS, so build a local charmap of
+	  separators and use it instead of the (cached and possibly stale)
+	  ifs_cmap map and isifs macro.  Fixes bug with -N stripping leading
+	  whitespace reported by Clark Wang <clarkw@vmware.com>
+
+				   11/25
+				   -----
+builtins/read.def
+	- read_builtin: make `i' volatile, since auto variables are technically
+	  undefined after a longjmp, and a timeout on SIGALRM causes one.
+	  Fix suggested by Dmitry Goncharov <dgoncharov@users.sf.net>
+
+				   11/27
+				   -----
+parse.y
+	- shell_getc: if we are reading input from a string, and we get the
+	  ending '\0', and we are not expanding an alias, return EOF right
+	  away.  It might be an eval'ed string that has a syntax error.
+	  Fixes bug reported by Dan Douglas <ormaaj@gmail.com>
+
+				   11/28
+				   -----
+subst.c
+	- expand_word_internal: if we're expanding a quoted string containing
+	  a tilde as the first character of a word, only expand the tilde if
+	  we're expanding an array subscript (Q_ARRAYSUB), not if we're
+	  expanding any arithmetic expression (Q_ARITH).  This fixes a
+	  backwards compatibility issue with expressions like ~0 reported by
+	  Bize Ma <binaryzebra@gmail.com>
+
+subst.c
+	- parameter_brace_expand_indir: if the variable is not special and
+	  the indirect variable is unset (!variable where variable is unset),
+	  report an error.  This is a slight incompatibility with previous
+	  versions, which did not differentiate between indirecting an unset
+	  variable and an indirect expansion resulting in an unset variable.
+	  Fixes omission reported by otenba@protonmail.com
+
+				   11/30
+				   -----
+lib/readline/doc/{rluser.texi,readline.3},doc/bash.1
+	- do-uppercase-version: since this doesn't actually exist, replace it
+	  with do-lowercase-version, with the caveat that do-lowercase-version
+	  results in undefined behavior if bound to a character that's
+	  already lowercase.  Suggested by Branden Robinson
+	  <g.branden.robinson@gmail.com>
+
+lib/readline/doc/rluser.texi
+	- history-substring-search-forward: was misspelled as "substr-search";
+	  ditto for search-backward
+
+doc/bash.1
+	- history-substring-search-{backward,forward}: add documentation, text
+	  straight from readline.3
+
+jobs.c
+	- initialize_job_control: if the terminal's process group is valid,
+	  but the shell is not the foreground process, check for terminating
+	  signals (like SIGHUP, which the kernel would send if the process
+	  group were orphaned) during the loop where we try to stop the shell
+	  if it's not in the foreground.  Not a perfect solution; the kernel
+	  might not send SIGHUP
+
+				   12/1
+				   ----
+jobs.c
+	- initialize_job_control: only go through the SIGTTIN loop 16 times at
+	  most before deciding we're in the background and probably a member of
+	  an orphaned process group; set original_pgrp to the terminal's pgrp
+	  (so the eventual give_terminal_to doesn't leave the terminal in the
+	  wrong pgrp); and bail on job control initialization
+
+tests/run-all
+	- unset SHELLOPTS to avoid its options `polluting' the test
+	  environment.  Suggestion from Vladimir Marek
+	  <Vladimir.Marek@oracle.com>
+
+tests/execscript
+	- use $PWD/exec8.sub to protect against someone who has a cd command
+	  in his bashrc.  Report from  Vladimir Marek
+	  <Vladimir.Marek@oracle.com> 
+
+				   12/2
+				   ----
+shell.c
+	- open_shell_script: call end_job_control before exiting the shell in
+	  case we were run as `bash -i script' and there is a problem with
+	  executing `script'.  If we don't, the terminal ends up in the wrong
+	  process group.  Fix from Clark Wang <clarkw@vmware.com>
+
+				   12/3
+				   ----
+parse.y
+	- read_comsub: if we look for a character following a `<' and it's
+	  not `<' (indicating that we don't have to read a here-document),
+	  make sure we push that character back and go through the loop again
+	  so we note the right word start location.  Fixes bug reported by
+	  parasite parasite <42parasite@gmail.com>
+
+subst.c
+	- parameter_brace_expand_indir: clean up checks for unset variables to
+	  minimize incompatibilities with previous versions
+
+				   12/5
+				   ----
+lib/readline/history.c
+	- add_history: don't update history_length until all of the updates to
+	  the_history are complete, so history_length is always consistent.
+	  Report and fix from Hong Cho <hong.cho@citrix.com>
+
+bashline.c
+	- bash_backward_shellword: fix to work better at the end of the line,
+	  with multiple trailing whitespace characters.  Inspired by report
+	  from Kirill Timofeev <kt97679@gmail.com>
+
+Makefile.in
+	- bashbug: use `^' as the sed delimiter instead of `%'; some compilers
+	  use `%' in CFLAGS.  Report from  Vladimir Marek
+	  <Vladimir.Marek@oracle.com> 
+
+				   12/6
+				   ----
+test.c
+	- test_unop: make sure op[1] != 0 before testing op[2]
+	- term: make sure argv[pos][1] != 0 before testing argv[pos][2].  Fixes
+	  oob-read reported by Jerzy Kramarz <op7ica@gmail.com>
+
+				   12/7
+				   ----
+lib/glob/glob.c
+	- glob_filename: assign the return value of realloc (results, ...) to
+	  a temp pointer, so if realloc returns NULL, we make sure we free
+	  results.  Report from Kirill Timofeev <kt97679@gmail.com>
+
+				   12/12
+				   -----
+lib/sh/shquote.c
+	- sh_backslash_quote: if FLAGS&2, backslash-quote other single-byte
+	  characters that are in the current locale's <blank> character class
+
+builtins/printf.def
+	- printf_builtin: when processing the `%q' format, make sure to
+	  backslash quote all <blank> characters by making sure that FLAGS
+	  passed to sh_backslash_quote includes 2.  Fixes issue for certain
+	  iso-8859-1 locales where character 160 (octal 240, hex 0xa0) is a
+	  non-breaking space. Report from Stephane Chazelas
+	  <stephane.chazelas@gmail.com>
+
+lib/sh/eaccess.c
+	- sh_stat: if DEV_FD_STAT_BROKEN is defined, take /dev/fd/N and turn
+	  it into a stat on file descriptor N, as if /dev/fd were not
+	  available.  This is the case on some old versions of SunOS.  Report
+	  and patch from Dmitry Goncharov <dgoncharov@users.sf.net>
+
+config.h.in
+	- DEV_FD_STAT_BROKEN: add define
+
+configure.ac
+	- --enable-dev-fd-stat-broken: new command-line option, defines
+	  DEV_FD_STAT_BROKEN if supplied at configure time
+
+doc/bashref.texi
+	- --enable-dev-fd-stat-broken: document new command-line option for
+	  configure
+
+arrayfunc.c
+	- assoc_expand_once: new variable, declared here just because
+
+arrayfunc.h
+	- assoc_expand_once: extern declaration
+	- AV_NOEXPAND: new flag value for the array_value family of functions:
+	  means to not run associative array subscripts through word expansion
+
+builtins/set.def
+	- unset_builtin: call unbind_array_element with assoc_expand_once as
+	  third arg, controls whether we expand associative array subscripts
+	  (if 1, we suppress the usual expansion).  With accompanying shopt,
+	  provides backwards compatible option to solve problem with quotes
+	  and other characters in associative array subscripts pointed out
+	  most recently by Mingye Wang (Arthur2e5) <arthur200126@gmail.com>
+
+builtins/shopt.def
+	- assoc_expand_once: new option, controls value of internal variable
+	  with the same name. Currently undocumented because I'm not completely
+	  sold on the name
+
+expr.c
+	- evalexp: now takes a second argument, flags. Changed all callers in
+	  multiple other files (builtins/let.def,execute_cmd.c,arrayfunc.c,
+	  subst.c,test.c,variables.c)
+
+externs.h
+	- EXP_EXPANDED, new flag for second argument to evalexp
+
+builtins/let.def
+	- let_builtin: add EXP_EXPANDED to flags passed to evalexp
+
+execute_cmd.c
+	- execute_arith_command: add EXP_EXPANDED to flags passed to evalexp,
+	  since the command string is run through expand_words_no_vars before
+	  being evaluated
+
+expr.c
+	- set expression-global variable already_expanded if flags arg to
+	  evalexp contains EXP_EXPANDED
+	- if assoc_expand_once option set and already_expanded flag set, pass
+	  1 in flags to array_variable_part to skip over quotes and expansions
+	  in the subscript
+	- if those two variables set, pass AV_NOEXPAND as flag to
+	  get_array_value to prevent word expansions on the subscript
+
+arrayfunc.c
+	- if flags passed to unbind_array_element includes 1, pass flag on to
+	  skipsubscript so we don't expect matched quotes or process
+	  expansions in the subscript
+	- if flags to array_value_internal include AV_NOEXPAND, pass 1 as flag
+	  to array_variable_part to pass along to skipsubscript
+	- if flags to array_value_internal include AV_NOEXPAND, don't call
+	  expand_assignment_string_to_string; just use the unexpanded subscript
+	  to produce the key [THIS IS A WORK IN PROGRESS]
+
+				   12/14
+				   -----
+subst.h
+	- ASS_NOEXPAND: assignment flag that inhibits expansion of associative
+	  array subscripts
+
+variables.c
+	- bind_int_variable: takes new flags arg; flags are taken from the
+	  ASS_ set of assignment flags, changed callers (bashline.c, expr.c,
+	  pcomplete.c)
+	- bind_int_variable: if flags includes ASS_NOEXPAND, pass 1 as flag to
+	  valid_array_reference and array_variable_part to pass along to
+	  skipsubscript, so we don't try to skip over quoted strings in the
+	  subscript
+	- bind_int_variable: pass flags along to assign_array_element
+
+variables.h
+	- bind_int_variable: updated extern declaration with new flags arg
+
+expr.c
+	- expr_bind_variable: if the assoc_expand_once option is enabled, and
+	  the flags to evalexp indicate that we have already run the expression
+	  through word expansion, pass ASS_NOEXPAND as flag to bind_int_variable
+
+arrayfunc.c
+	- assign_array_element: if flags includes ASS_NOEXPAND, pass 1 as flag
+	  to array_variable_name to pass along to skipsubscript
+	- assign_array_element: if flags includes ASS_NOEXPAND, don't run an
+	  associative array subscript through word expansion, just use as-is
+
+subst.c
+	- param_expand: call evalexp with EXP_EXPANDED flag for arithmetic
+	  substitution because the string has already been expanded with
+	  expand_arith_string
+
+				   12/15
+				   -----
+builtins/read.def
+	- read_builtin: use value of assoc_expand_once for valid_array_reference
+	  as with other uses
+	- bind_read_variable: if assoc_expand_once is set, pass ASS_NOEXPAND
+	  to assign_array_element
+
+general.c
+	- assignment: instead of checking whether flags == 0 to allow a `[',
+	  explicitly check for (flags&1) to disallow it.  This leaves the door
+	  open for additional flag values
+
+builtins/printf.def
+	- printf_builtin: use value of assoc_expand_once for
+	  valid_array_reference as with other uses
+	- bind_printf_variable: if assoc_expand_once is set, pass ASS_NOEXPAND
+	  to assign_array_element
+
+				   12/16
+				   -----
+builtins/history.def
+	- change history -d option to handle negative arguments; negative
+	  arguments offset from the end of the history list (last_position + 1
+	  so history -d -1 deletes the history -d command that just got
+	  added).  Original patch from Piotr Grzybowski <narsil.pl@gmail.com>
+
+doc/bash.1,lib/readline/doc/hsuser.texi
+	- documented new behavior of negative offsets for `history -d'
+
+				   12/17
+				   -----
+lib/readline/history.c
+	- remove_history: use memmove to move the history list around instead
+	  of a loop that copies pointers one at a time, similar to add_history
+
+				   12/19
+				   -----
+configure.ac
+	- linux: make sure PGRP_PIPE is defined unconditionally for all kernel
+	  versions greater than 2.3.*
+
+lib/readline/history.c
+	- clear_history: when clearing the history, reset history_base to 1
+	  (its default)
+	- remove_history_range: new function, removes a set of history entries
+	  and returns them all for deallocation
+
+lib/readline/history.h
+	- remove_history_range: extern declaration
+
+				   12/20
+				   -----
+execute_cmd.c
+	- eval_arith_for_expr: pass EXP_EXPANDED to evalexp, since we run the
+	  expression through expand_words_no_vars
+
+				   12/21
+				   -----
+input.c
+	- b_fill_buffer: when read returns EOF or error, and we reset the
+	  buffer and pointers, reset the input pointer to 0.  Fixes issue
+	  reported by Stephane Chazelas <stephane.chazelas@gmail.com>
+
+				   12/22
+				   -----
+arrayfunc.[ch],subst.c
+	- array_expand_index: added new FLAGS argument, reserved for future use,
+	  changed callers
+
+
+				   12/24
+				   -----
+variables.c
+	- can_optimize_assignment,optimized_assignment: see if we can detect
+	  whether or not we're trying to append a string to a string variable,
+	  and optimize that using realloc/strcpy.  Based on a log-ago
+	  suggestion from Aharon Robbins <arnold@skeeve.com>
+
+				   12/27
+				   -----
+builtins/help.def
+	- help_builtin: don't pass return value from ngettext() directly to
+	  printf
+
+				   12/28
+				   -----
+sig.c
+	- set_signal_handler: set SA_RESTART for SIGWINCH, so window size
+	  changes don't interrupt open/read/write.  Suggested by
+	  Andriy Prystupa <andriy.prystupa@globallogic.com> back in 10/2016
+
+				   12/30
+				   -----
+execute_cmd.c
+	- coproc_pidchk: if MULTIPLE_COPROCS, call cpl_search to find coproc
+	  associated with pid, don't remove it from the list with cpl_delete.
+	  Just mark as dead and wait for coproc_reap/cpl_reap to take care
+	  of disposing it
+	- execute_coproc: NEW FEATURE: run the coproc name through word
+	  expansion before creating the coproc; this allows unique coprocs
+	  to be created in loops. Originally requested way back in 2012 by
+	  Erik Brandsberg <ebrandsberg@juniper.net>
+
+command.h
+	- subshell_com: now has a line number member: line
+
+make_cmd.c
+	- make_subshell_command: assign current line number (line number of the
+	  ending right paren) to `line' member
+
+copy_cmd.c
+	- copy_subshell_command: copy the `line' member
+
+execute_command.c
+	- execute_command_internal: when executing a user subshell (`(command)'),
+	  set the line number and line number for the ERR trap from the line
+	  number saved in the subshell command struct.  Fix from
+	  Eduardo A. Bustamante López <dualbus@gmail.com>
+	- execute_arith_command: set line number for ERR trap from line number
+	  saved in the arith command struct.  Fix from
+	  Eduardo A. Bustamante López <dualbus@gmail.com>
+	- execute_cond_command: set line number for ERR trap from line number
+	  saved in the cond command struct.  Fix from
+	  Eduardo A. Bustamante López <dualbus@gmail.com>
+
+variables.c
+	- bind_variable_internal: move can_optimize_assignment call to the
+	  right place
+
+				   12/31
+				   -----
+variables.c
+	- find_variable_nameref: treat a circular variable reference as
+	  referring to a variable of that name in the global scope (for now),
+	  if one exists.  PROVISIONAL change: inspired by suggestion back in
+	  6/2016 by Grisha Levit <grishalevit@gmail.com>
+
+				 1/2/2017
+				 --------
+{expr,general,hashcmd}.c
+	- include flags.h for flag values
+
+make_cmd.c
+	- include shell.h instead of the files it includes
+
+flags.h
+	- new extern declarations for want_pending_command, read_from_stdin
+
+subst.h
+	- add extern declaration for expanding_redir, assigning_in_environment
+
+trap.h
+	- add extern declaration for running_trap
+
+execute_cmd.h
+	- added extern declarations for variables declared in execute_cmd.c,
+	  changed files that declare lots of extern variables
+
+shell.h
+	- added extern declarations for variables declared in shell.c,
+	  changed files that declare lots of extern variables 
+
+parser.h
+	- added extern declarations for variables declared in parse.y,
+	  changed files that declare lots of extern variables 
+
+[lots of changes to reduce the number of extern declarations in C and DEF files]
+
+parse.y
+	- xparse_dolparen: need ALIAS or DPAREN_ARITHMETIC to be defined to
+	  use STRING_SAVER
+
+				    1/3
+				    ---
+sig.c
+	- termsig_handler: don't call end_job_control if subshell_environment
+	  indicates that we're in a command or process substitution.
+	  Provisional fix for bug reported by Russell King <rmk@armlinux.org.uk>
+
+jobs.c
+	- end_job_control: only attempt to give the terminal back to
+	  original_pgrp if job_control != 0; don't test interactive_shell
+
+execute_cmd.c
+	- execute_disk_command: call QUIT after search_for_command, since
+	  the only time QUIT gets called is when the path is actually
+	  searched.  It doesn't happen for an absolute pathname.  Fix for
+	  bug reported by Russell King <rmk@armlinux.org.uk>
+
+				   1/16
+				   ----
+lib/glob/glob.c
+	- extglob_skipname,wextglob_skipname: if we don't find a reason to
+	  not skip the name in any subpattern (r returns 0 for any subpattern),
+	  return 1 because we should skip the name
+	- extglob_skipname,wextglob_skipname: if we don't find a reason to
+	  not skip the name in any subpattern, but the first part of the extglob
+	  pattern is a wildcard (`*(pat)'), check the rest of the pattern, if
+	  any, to decide whether or not to skip the name. Fixes bug reported
+	  by Grisha Levit <grishalevit@gmail.com>
+
+lib/glob/glob_loop.c
+	- CHAR -> GCHAR (unsigned char); change uses of CHAR to GCHAR
+
+lib/glob/glob.c
+	- wchkname -> wskipname
+	- wskipname: now takes a third `flags' argument, like the other variants
+	  of skipname
+
+				   1/17
+				   ----
+redir.c
+	- here_document_to_fd: set the file descriptor open for writing to the
+	  here document to be close-on-exec.  Fixes bug reported by
+	  Siteshwar Vashisht <svashisht@redhat.com>
+
+				   1/18
+				   ----
+{gmisc,gm_loop}.c
+	- match_pattern_char,match_pattern_wchar: moved to gm_loop.c (new file),
+	  compile twice for single and wide characters as with the rest of
+	  the functions
+	- umatchlen,wmatchlen: ditto
+	- extglob_pattern_p: move to gm_loop.c, generalize for regular and
+	  wide-char versions
+
+				   1/19
+				   ----
+lib/readline/complete.c
+	- stat_char: fix small memory leak if stat/lstat returns -1
+
+bashline.c
+	- bash_filename_stat_hook,bash_directory_completion_hook: make sure
+	  expand_prompt_string is caled wth W_NOPROCSUB flag
+	- directory_exists: don't dequote the filename passed as an argument;
+	  this function should never get quoted pathnames
+
+subst.c
+	- expand_word_internal: when calling expand_word_internal recursively
+	  after reading a double-quoted string, make sure the W_NOCOMSUB and
+	  W_NOPROCSUB flags make it to the recursive invocation.  Fixes bug
+	  reported by Jens Heyens <jens.heyens@cispa.saarland>
+
+				   1/23
+				   ----
+lib/readline/signals.c
+	- _rl_orig_sigset: original signal mask, set and restored by
+	  rl_set_signals (rl_clear_signals doesn't block signals).  If we
+	  are not installing signal handlers, just save signal mask each
+	  time rl_set_signals is called
+
+lib/readline/input.c
+	- rl_getc: use _rl_orig_sigmask in the call to pselect(), so we block
+	  the set of signals originally blocked by the calling application.
+	  Fixes bug reported by Frédéric Brière <fbriere@fbriere.net>
+
+parse.y
+	- yy_readline_get: try to unset NONBLOCK mode on readline's input
+	  file descriptor before calling readline(). Inspired by report from
+	  Siteshwar Vashisht <svashisht@redhat.com>
+
+				   1/30
+				   ----
+parse.y
+	- parse_comsub: don't unconditionally set the LEX_WASDOL flag when we
+	  see a `$'; we should toggle it to accommodate things like $$.
+	  Fixes bug reported by Christian Weisgerber <naddy@mips.inka.de>
+	- parse_matched_pair: do the same thing with LEX_WASDOL
+
+				    2/1
+				    ---
+jobs.h
+	- JWAIT_PERROR,JWAIT_FORCE: new defines for the wait_for_ family of
+	  functions
+
+jobs.c
+	- wait_for_job, wait_for_any_job: take new flags argument for use by
+	  the wait builtin
+	- wait_for_job: if JWAIT_FORCE flag supplied, loop waiting for job to
+	  terminate instead of change state
+	- wait_for_single_pid: if JWAIT_FORCE flag supplied, loop waiting for
+	  child process to terminate instead of change state
+
+builtins/wait.def
+	- takes a new `-f' option, signifying to wait until the specified job 
+	  or process terminates, instead of changes state
+
+doc/{bash.1,bashref.texi}
+	- wait: document the new -f option and its behavior when job control
+	  is enabled
+	- job control: add a paragraph describing how the wait builtin changes
+	  behavior when job control is enabled: it returns when a job changes
+	  state
+
+				    2/2
+				    ---
+examples/loadables/fdflags.c
+	- fdflags: new loadable builtin to set and unset file descriptor flags
+	  (such as non-blocking, though bash undoes that) for descriptors bash
+	  has open. Developed in consultation with Christos Zoulas
+	  <christos@zoulas.com>
+
+				    2/3
+				    ---
+
+lib/readline/text.c
+	- rl_previous_screen_line: attempt to move to the same column on the
+	  previous screen line of the current readline buffer by moving back
+	  a number of characters equal to the screen width
+	- rl_next_screen_line: attempt to move to the same column on the
+	  next screen line of the current readline buffer by moving forward
+	  a number of characters equal to the screen width. Both originally
+	  suggested by Hans Ginzel <hans@matfyz.cz>
+
+lib/readline/readline.h
+	- rl_{next,previous}_screen_line: extern declarations
+
+lib/readline/funmap.c
+	- {next,previous}-screen-line: new bindable command names
+
+lib/readline/doc/{rluser.texi,readline.3}
+	- {next,previous}-screen-line: document behavior, including limitations
+
+				    2/5
+				    ---
+lib/readline/input.c
+	- rl_read_key: when reading input from a macro, make sure to return
+	  the next character as an unsigned char, so we handle multibyte
+	  character sequences correctly.  Report and fix from Grisha Levit
+	  <grishalevit@gmail.com>
+
+				    2/6
+				    ---
+shell.c
+	- --pretty-print: new invocation option, currently undocumented, dumps
+	  a pretty-printed version of a shell script given as an argument to
+	  stdout
+	- main: call pretty_print_loop() if we're in pretty-printing mode in
+	  a non-interactive shell
+
+eval.c
+	- pretty_print_loop: new function, similar to reader_loop, reads
+	  commands and prints them by displaying the result from
+	  make_command_string()
+
+externs.h
+	- pretty_print_loop: new extern declaration
+
+				    2/9
+				    ---
+doc/{bash.1,bashref.texi}
+	- here strings: correct documentation to note they do not undergo
+	  brace expansion. Report from Conor McCarthy <mr.spuratic@gmail.com>
+
+				    2/9
+				    ---
+lib/readline/display.c
+	- expand_prompt: instead of recomputing the line break offsets for
+	  prompts that span multiple screen lines on every call to rl_redisplay,
+	  do it here. Manage a local array local_prompt_newlines; set an offset
+	  every time `physchars' hits a multiple of the screen width.  Inspired
+	  by https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=843819
+	- rl_redisplay: don't calculate multi-line prompt line break indices
+	  here; use the values calculated by expand_prompt
+	- rl_{save,restore}_prompt: save and restore local_prompt_newlines
+
+				   2/11
+				   ----
+lib/readline/mbutil.c
+	- _rl_find_prev_mbchar_internal: since we're traversing the string
+	  from the beginning, shortcut non-multibyte characters in a UTF-8
+	  locale
+
+parse.y
+	- parse_comsub: if we are parsing a here document with a quoted
+	  delimiter (LEX_QUOTEDDOC), we should not remove <backslash><newline>
+	  pairs from the body of the here document.  Need to add LEX_QUOTEDDOC
+	  to the values in tflags when calling shell_getc.  Fixes bug reported
+	  by Michael Homer <michael.homer@ecs.vuw.ac.nz>, patch was originally
+	  contributed by Geir Hauge <geir.hauge@gmail.com>
+
+				   2/15
+				   ----
+jobs.c
+	- bgp_add: if hashed pid collides with bgpids.head index, print a
+	  warning and move to the next index.  Attempt to avoid collision
+	  problem reported by Graham Northup <northug@clarkson.edu>
+
+				   2/17
+				   ----
+subst.c
+	- process_substitute: call remove_quoted_escapes on the command string
+	  like command substitution does, since the string will be run through
+	  the parser again.  Fixes bug reported by David Simmons
+	  <bug-bash@tmp.davidsimmons.com>
+
+config-top.h
+	- STATIC_PATH_VALUE: new config variable, undefined by default
+
+variables.c
+	- shell_initialize: if STATIC_PATH_VALUE is defined, use it to set the
+	  PATH variable at shell startup, overriding the environment and any
+	  value for DEFAULT_PATH_VALUE.  Based on a suggestion from
+	  Lonnie Abelbeck <lonnie@abelbeck.com>
+
+				   2/18
+				   ----
+shell.c
+	- maybe_make_restricted: clear the hash table before making the PATH
+	  variable read-only by calling stupidly_hack_special_variables.
+	  Suggestion from Lonnie Abelbeck <lonnie@abelbeck.com>
+
+subst.c
+	- expand_string_for_pat: change expansion of WORD in ${param[%[%]][#[#]]word}
+	  to use this new function, initially identical to
+	  expand_string_for_rhs
+	- getpattern: use expand_string_for_pat to expand the pattern
+
+				   2/19
+				   ----
+subst.c
+	- expand_string_for_rhs: now that this is only used to expand the RHS
+	  of the various non-pattern ${paramOPword} expansions, set
+	  expand_no_split_dollar_star depending on whether or not the entire
+	  brace expansion is going to be subjected to word splitting: if it's
+	  quoted or if IFS is set but null, we will not be splitting so we set
+	  this to 1 and let $* expand to separate fields separated by a space.
+	  This was heavily debated back in October 2014 and resulted in Posix
+	  interp 888. Reported by Martijn Dekker <martijn@inlv.org>
+
+				   2/20
+				   ----
+subst.c
+	- expand_string_for_rhs: now takes `op' (brace expansion operator) as
+	  an additional argument; changed call in parameter_brace_expand_rhs
+	- expand_string_for_rhs: make sure to set expand_no_split_dollar_star
+	  if `op' is `=', since we are supposed to preserve the assignment
+	  statement expansion semantics on the RHS of ${param=word}
+
+jobs.c
+	- bgp_delindex: make sure to set ps->pid to NO_PID so we more
+	  effectively remove it from the hash table. It shouldn't matter as
+	  long as nothing in pidstat_table points to it, but better to be safe
+	- bgp_delete,bgp_search: generalize previous collision detection to
+	  loop detection: abort search if we are going to go back to the
+	  first index we tried
+
+				   2/21
+				   ----
+lib/readline/vi_mode.c
+	- rl_vi_bword: if we're trying to move backward to non-whitespace
+	  in a line that begins with whitespace, make sure we don't move
+	  point to 0 and test memory locations before the start of the
+	  buffer. Report and fix from Jason Hood <jadoxa@yahoo.com.au>
+
+lib/readline/display.c
+	- expand_prompt: if _rl_screenwith == 0, call rl_reset_screen_size to
+	  initialize it. If it's still 0 after that, guess that the screen
+	  width is 80 and use that to guess how many screen lines the prompt
+	  consumes
+
+lib/readline/readline.c
+	- readline_internal_setup: if in emacs editing mode, and we are
+	  showing the editing mode in the prompt, call _rl_reset_prompt() to
+	  make sure that the updated setting of _rl_show_mode_in_prompt
+	  (presumably set in an inputrc file) is reflected in the redisplay
+	  performed by rl_callback_newline via readline_internal_setup.
+	  Fix from Jason Hood <jadoxa@yahoo.com.au>
+
+				   2/22
+				   ----
+builtins/complete.def
+	- print_one_completion,print_compopts: make sure to display the
+	  `nosort' and `noquote' options if they've been set for a particular
+	  compspec.  Fix from Grisha Levit <grishalevit@gmail.com>
+
+builtins/read.def
+	- read_builtin: if -e is supplied, read needs to free rlbuf before
+	  returning, since it uses discard_unwind_frame at that point. Bug
+	  and fix from ZhangXiao <xiao.zhang@windriver.com>
+
+execute_cmd.c
+	- execute_for_command: when using a nameref as the for loop control
+	  variable, make sure we check for readonly namerefs and make sure
+	  that we force bind_variable to enforce restrictions on nameref
+	  assignments. Fix from Grisha Levit <grishalevit@gmail.com>
+
+				   2/23
+				   ----
+general.c
+	- make_absolute: convert deprecated cygwin_conv_to_full_posix_path
+	  to cygwin_conv_path (CCP_WIN_A_TO_POSIX, ...)
+
+{shell,variables}.c,config-top.h
+	- modify change from 2/17: rename STATIC_PATH_VALUE to RBASH_STATIC_PATH_VALUE;
+	  don't use it in shell_initialize; set PATH to it just before
+	  imposing restricted shell restrictions
+
+				   2/24
+				   ----
+subst.c
+	- expand_string_for_rhs: revert change from 2/19 concerning setting
+	  expand_no_split_dollar_star so we are consistent with the Posix
+	  examples. This anticipates Martijn Dekker initiating an austin
+	  group discussion about this case
+
+				   2/25
+				   ----
+pcomplete.c
+	- gen_shell_function_matches: if COMPREPLY is an associative array,
+	  don't coerce it to an indexed array, which will fail to produce any
+	  matches anyway.  Report from Grisha Levit <grishalevit@gmail.com>
+	- bind_comp_words: if COMP_WORDS exists as a nameref variable, ignore
+	  the nameref attribute. Report from Grisha Levit
+	  <grishalevit@gmail.com>
+
+subst.c
+	- parameter_brace_expand: if expand_no_split_dollar_star is set, make
+	  sure chk_atstar treats ${var[*]} as quoted by passing Q_DOUBLE_QUOTES
+	  as the second argument.  Fixes differing treatment of $* and ${v[*]}
+	  reported by Grisha Levit <grishalevit@gmail.com>, because otherwise
+	  *contains_dollar_at gets set to 1 and the word is inappropriately
+	  split
+
+				    3/1
+				    ---
+subst.c
+	- expand_word_list_internal: if a variable assignment fails (e.g., due
+	  to a readonly variable) in a non-interactive posix mode shell, don't
+	  abort the shell if the assignment is being performed by the command
+	  builtin, even if it's something like `command eval v=1'.  Fixes
+	  RedHat bug https://bugzilla.redhat.com/show_bug.cgi?id=1389838
+	  (reported by Denys Vlasenko)
+
+				    3/3
+				    ---
+builtins/shopt.def
+	- set_compatibility_level: make sure that changing the compatibility
+	  level sets or modifies BASH_COMPAT. Fixes bug reported by
+	  Stephane Chazelas <stephane.chazelas@gmail.com>
+
+lib/glob/smatch.c
+	- is_cclass: broke into two functions: is_valid_cclass and cclass_test,
+	  for future expansion. No functionality change
+
+lib/glob/sm_loop.c
+	- BRACKMATCH: when testing a character against a character class name,
+	  use the unfolded (original) character, since we're not performing a
+	  comparison. This is what glibc does.  Fixes bug reported by
+	  Lukáš BaÅinka <lukas.barinka@boxtrap.net>
+
+				    3/4
+				    ---
+doc/{bash.1,bashref.texi}
+	- note that the arguments to -eq and the rest of the arithmetic
+	  operators are evaluated as expressions when using [[.  Report from
+	  Rob la Lau <rob@ohreally.nl>
+
+
+				    3/7
+				    ---
+lib/readline/display.c
+	- update_line: completely rewrote the code that handles line wrapping
+	  in the presence of multibyte/double-width characters; punts to a
+	  dumb update in cases where the number of screen positions doesn't
+	  match
+	- update_line: in one case, where we are deleting characters from the
+	  line, if we are writing a non-space into the last screen character
+	  position, note that we are no longer using a space as a placeholder
+	  for a line wrap where there is a multi-width character that won't
+	  fit on the screen line (wrapped_line[current_line+1] = 0)
+
+				   3/10
+				   ----
+lib/readline/readline.c
+	- bind_arrow_keys_internal: add default key bindings for control-
+	  arrow keys, suggested by Per Bothner <per@bothner.com>
+
+				   3/13
+				   ----
+doc/{bash.1,bashref.texi}
+	- clarify the prompt strings the undergo expansion (PS0, PS1, PS2, and
+	  PS4) before being displayed.  Based on a report from Grisha Levit
+	  <grishalevit@gmail.com>
+
+				   3/14
+				   ----
+input.c
+	- bufstream_ungetc: return EOF if being asked to unget a character to
+	  a NULL buffer
+	- buffered_getchar: check buffered_fd is valid and buffers[buffered_fd]
+	  is non-NULL before trying to dereference. Fixes bug reported by
+	  floyd <floyd@floyd.ch>
+
+execute_cmd.c
+	- execute_null_command: if we fork to execute the command, the subshell
+	  is not interactive
+	- execute_null_command: for safety's sake, if a redirection attached
+	  to a null command affects fd 0 or the fd the shell is reading for
+	  input, and the redirection can potentially change or close that file
+	  descriptor, force a fork so the redirection is done in a subshell
+
+				   3/15
+				   ----
+lib/readline/display.c
+	- update_line: if we have to output some bytes, and we are outputting
+	  the prompt string, make sure we correct _rl_last_c_pos if we are
+	  at the wrap offset -- what if all of the characters in the prompt
+	  are invisible, so the visible length is 0?  Fixes display bug
+	  reported by Grisha Levit <grishalevit@gmail.com>
+
+execute_cmd.c
+	- undo_partial_redirects: new function, performs redirections specified
+	  in redirection_undo_list and disposes of them. Intended to be used
+	  to unwind redirections performed before a redirection error
+	- dispose_partial_redirects: new function, disposes of
+	  redirection_undo_list and nulls the list
+	- execute_command_internal: use undo_partial_redirects
+
+execute_cmd.h
+	- undo_partial_redirects: extern declaration
+	- dispose_partial_redirects: extern declaration
+
+subst.c
+	- exp_jump_to_top_level: if we are throwing an expansion error while
+	  expanding a redirection (expanding_redir != 0), undo any undoable
+	  redirections by calling undo_partial_redirects() so we don't leave
+	  any in place
+
+variables.c
+	- initialize_shell_variables: if SHELLOPTS is in the environment,
+	  unset the readonly attribute on any existing variable with that
+	  name. It may have been created by processing a -o option on the
+	  command line.  Fixes issue reported by Stephane Chazelas
+	  <stephane.chazelas@gmail.com>
+
+				   3/16
+				   ----
+lib/readline/histfile.c
+	- read_history_range: short-circuit and do nothing if the history file
+	  is of 0 size
+	- read_history_range: make sure the buffer is zero-terminated so the
+	  timestamp tests work right for history files of 1 character.  Report
+	  and recommended fix from Denis Martinez <denis.martinez@gmx.com>
+
+lib/readline/complete.c
+	- compute_lcd_of_matches: when trying to compute the common prefix
+	  of a set of matches while performing case-insensitive completion
+	  matching, don't sort the match list unless rl_sort_completion_matches
+	  is non-zero.  Fixes problem reported by Roee Bar <roee@arista.com>
+
+				   3/18
+				   ----
+subst.c
+	- extract_dollar_brace_string: handle process substitution embedded in
+	  a ${...} expansion in the same way as command substitution.  Reported
+	  by D630 <d630@posteo.net>
+
+parse.y
+	- LEX_GTLT: new flag, set by parse_matched_pair when a `<' or '>' is
+	  read
+	- parse_matched_pair: handle an embedded process substitution like an
+	  embedded command substitution if we are parsing an array index or
+	  a dollar-brace expansion.  Reported by D630 <d630@posteo.net>
+
+				   3/21
+				   ----
+subst.h
+	- ASS_NOEVAL, ASS_NOLONGJMP: new values for assignments, used by
+	  make_variable_value
+
+variables.c
+	- make_variable_value: ASS_NOEVAL: if this is set, don't attempt
+	  arithmetic evaluation or case modification, just produce the value
+	  (still honor ASS_APPEND)
+	- make_variable_value: ASS_NOLONGJMP: don't longjmp back to top_level
+	  if arithmetic evaluation fails due to a syntax error
+	- bind_variable_internal: make sure aflags is passed to all calls to
+	  make_variable_value
+	- push_temp_var: add ASS_NOLONGJMP to the flags passed to
+	  bind_variable_internal.  Fixes bug reported by D630 <d630@posteo.net>
+
+bashline.c
+	- bash_execute_unix_command: don't bother to attempt optimization by
+	  checking whether the call to parse_and_execute changes $READLINE_LINE;
+	  it can be defeated by the new code that optimizes appends to string
+	  variables. Bug reported by Grisha Levit <grishalevit@gmail.com>
+
+				   3/22
+				   ----
+subst.c
+	- expand_string_for_rhs: re-apply change from 2/19 based on discussion
+	  on the austin-group mailing list about how unquoted ${var-$*}
+	  expands when IFS is null.  Originally reported by Martijn Dekker
+	  <martijn@inlv.org>
+
+				   3/25
+				   ----
+parse.y
+	- read_token_word: if we read a WORD immediately after a CASE, FOR, or
+	  SELECT, increment `expecting_in_token' to note that we're going to
+	  be reading IN as the next non-newline token
+	- special_case_tokens: if we're expecting an IN (expecting_in_token > 0)
+	  and we have an "in", return IN and decrement expecting_in_token. This
+	  is a better implementation of Posix grammar rule 6 than the previous
+	  code in that function (which is still there for posterity, but should
+	  eventually be removed).  Fixes bug reported by Torka Noda
+	  <kanito.tasoga@gmail.com>
+
+subst.c
+	- string_list_pos_params: if the expansion is not quoted, and IFS is
+	  null, return a string containing the quoted positional parameters
+	  separated by spaces.  Callers know what to do with the string
+	- parameter_brace_substring,parameter_brace_remove_pattern,
+	  parameter_brace_transform,parameter_brace_patsub,parameter_brace_casemod:
+	  for the VT_POSPARMS case, after calling the operator-specific
+	  expansion function, which eventually calls string_list_pos_params,
+	  leave the returned string alone, since it's already quoted properly
+	- parameter_brace_expand: after calling the above functions to perform
+	  expansions, if the expansion is being performed on an unquoted $*
+	  when IFS is null, set the W_SPLITSPACE flag in the return WORD_DESC
+	  so that splitting on spaces is performed on the already-quoted word.
+	  Fixes bug reported by Grisha Levit <grishalevit@gmail.com>
+
+				   3/28
+				   ----
+subst.c
+	- process_substitute: change so the subshell doesn't inherit the 'v'
+	  option, like command substitution now does (as of bash-4.4).
+	  Suggested by Grisha Levit <grishalevit@gmail.com>
+
+				   3/30
+				   ----
+subst.c
+	- parameter_brace_casemod: now takes a pflags parameter, like
+	  parameter_brace_patsub; changed callers
+	- parameter_brace_transform: now takes a pflags parameter, like
+	  parameter_brace_patsub; changed callers
+	- pos_params_pat_subst,pos_params_modcase: if mflags indicates we're
+	  on the rhs of an assignment statement and not going to perform
+	  word splitting, we're expanding $*, and $IFS is null, make sure
+	  string_list_pos_params treats the expansion as double-quoted, so
+	  the positional parameters will be concatenated.  Fixes bug reported
+	  by Grisha Levit <grishalevit@gmail.com>
+
+				   3/31
+				   ----
+doc/{bash.1,bashref.texi}
+	- add notes to the description of pipelines emphasizing that each
+	  element of a pipeline is executed in a subshell, referring to the
+	  description of a command execution environment, and that the
+	  lastpipe option can modify that behavior. From a discussion with
+	  Jean Delvare <jdelvare@suse.de>
+
+				    4/1
+				    ---
+subst.c
+	- expand_word_internal: set had_quoted_null to note for later if we
+	  expand '', "", or "$x" when x is unset
+	- expand_word_internal: if we expand "$param" (or "${param}") and we
+	  come back with a single word with the W_HAVEQUOTEDNULL flag set,
+	  make sure we set had_quoted_null to remember it for later. In this
+	  case, if we already have seen a quoted null and we expanded $@ in
+	  this (sub)string expansion, we don't want to do any of the special
+	  $@ handling. In particular, we don't want to set *expanded_something,
+	  because that will result in word splitting and quoted null removal.
+	  Fixes bug reported by Grisha Levit <grishalevit@gmail.com>
+	- parameter_brace_patsub: when expanding ${*/pat/sub} in the case
+	  where ifs_is_null != 0 and (pflags & PF_NOSPLIT2) (meaning we aren't
+	  going to be doing word splitting), pass MATCH_ASSIGNRHS so we do
+	  the right thing in this case. Part of a set of cases inspired by
+	  Grisha Levit <grishalevit@gmail.com>
+	- param_expand: case '*': if we are on the rhs of an assignment
+	  (PF_ASSIGNRHS) and ifs is unset, and $1 == " ", we need to make sure
+	  string_list_dollar_at gets called with Q_DOUBLE_QUOTES so it quotes
+	  the positional parameters before joining them into a string with
+	  string_list_internal.  Otherwise, that first space gets removed by
+	  the implicit word splitting that gets performed.  Reported by
+	  Grisha Levit <grishalevit@gmail.com>
+
+array.c
+	- array_patsub,array_modcase: handle ${A[*]} identically to $* when
+	  not quoted and IFS is null (separate with spaces).  Makes things
+	  like ${A[*]/x/y} behave the same as ${*/x/y} when IFS is null
+
+subst.c
+	- parameter_brace_patsub,parameter_brace_casemod: if expanding ${A[*]}
+	  when the match is on the rhs of an assignment statement (PF_ASSIGNRHS)
+	  and ifs is null, make sure the match is performed as if it were
+	  quoted
+	- parameter_brace_substring: now takes a PFLAGS argument
+	- parameter_brace_substring: if expanding $* in a context where we
+	  don't want to do word splitting (expand_no_split_dollar_star &&
+	  PF_NOSPLIT2), make sure we expand $* as if it were quoted
+	- parameter_brace_substring: if expanding an unquoted $* on the rhs of
+	  an assignment statement when IFS is null, make sure we expand the $*
+	  as if it were quoted
+
+				    4/4
+				    ---
+doc/{bash.1,bashref.texi}
+	- read: document that a delim argument of '' terminates each line when
+	  a NUL character appears
+
+				    4/5
+				    ---
+subst.c
+	- parameter_brace_expand_word: handle case where unquoted $@ is
+	  expanded in a context where word splitting is not performed (PF_NOSPLIT2)
+	  and IFS is not equal to the standard value
+	- param_expand: handle case where unquoted $@ is expanded in a context
+	  where word splitting is not performed (PF_NOSPLIT2) and IFS is not
+	  equal to the standard value.  Fixes bug with IFS == $1 when expanding
+	  unquoted $@ reported by Grisha Levit <grishalevit@gmail.com>
+
+				    4/7
+				    ---
+subst.c
+	- pos_params_pat_subst: if MATCH_ASSIGNRHS is set, don't expand $*
+	  as quoted unless expand_no_split_dollar_star is also set. Fixes
+	  expansion bug reported on 4/4 by Grisha Levit <grishalevit@gmail.com>
+	- parameter_brace_transform: if we transform unquoted A[@] or A[*]
+	  when IFS is null, don't quote the result of array_transform in the
+	  same way we don't quote the result of parameter_list_transform,
+	  since it will come back quoted.  Fixes bug reported by
+	  Grisha Levit <grishalevit@gmail.com>
+	- list_transform: if we transform unquoted $* or ${a[*]} when IFS is
+	  null and expand_no_split_dollar_star is non-zero, call
+	  string_list_pos_params with Q_DOUBLE_QUOTES to inhibit splitting.
+	  We do this in all cases except @Q, which is inconsistent but more
+	  intuitive.
+	  Fixes bug reported by Grisha Levit <grishalevit@gmail.com>
+
+				    4/8
+				    ---
+builtins/read.def
+	- read_mbchar: if unbuffered == 2, we are running read -N and need to
+	  use zreadn to read the rest of the multibyte char, since the
+	  previous call to zreadn may have buffered characters.  Fixes bug
+	  reported by Stephane Chazelas <stephane.chazelas@gmail.com>
+
+pathexp.h
+	- QGLOB_CTLESC: new flag for quote_string_for_globbing: means to turn
+	  CTLESC CTLESC (quoted CTLESC that's usually removed as part of
+	  word splitting or quote removal) into CTLESC
+
+pathexp.c
+	- quote_string_for_globbing: if QGLOB_CTLESC is present in flags,
+	  turn CTLESC CTLESC into CTLESC, even if the first CTLESC is preceded
+	  by a backslash. Callers can't do this because the remaining CTLESC
+	  will be treated as a quoting character and turned into a backslash
+
+execute_cmd.c
+	- execute_case_command: if the pattern is not quoted, make sure to tell
+	  quote_string_for_globbing to turn CTLESC CTLESC into CTLESC by
+	  passing QGLOB_CTLESC.  Fixes bug reported 4/2 by Martijn Dekker
+	  <martijn@inlv.org>
+
+				    4/9
+				    ---
+subst.c
+	- string_transform: after calling ansiexpand for the `E' transformation,
+	  need to call dequote_escapes because ansiexpand assumes it is being
+	  called by the parser and arranges for ansicstr to quote CTLESC and
+	  CTLNUL with CTLESC.  Reported by Grisha Levit <grishalevit@gmail.com>
+
+variables.c
+	- mk_env_string: when exporting functions, run them through
+	  dequote_escapes because any strings containing CTLESC or CTLNUL are
+	  still quoted with CTLESC.  Reported by Grisha Levit
+	  <grishalevit@gmail.com>
+
+subst.[ch]
+	- quote_escapes,dequote_escapes: now take const char * argument
+
+execute_cmd.c
+	- execute_intern_function: if the function name contains CTLESC, run
+	  it through dequote_escapes just in case it got CTLESC quoting
+	  CTLESC or CTLNUL from the parser
+
+				   4/11
+				   ----
+eval.c
+	- reader_loop: make sure PS0 is expanded and displayed before
+	  incrementing the command number
+
+parse.y
+	- prompt_history_number:  function to make history number as reported
+	  by \!, or posix mode !!, be the same index that the (possibly multi-
+	  line) command will be stored with. The history library increments
+	  history_offset as soon as a new line is entered, and it's up to the
+	  history code to store the second and subsequent lines of a command
+	  in the same history entry.  If we are expanding PS0 or PS4, or
+	  a ${var@P} expansion, we're already past the history entry no
+	  matter what.  Inspired by patch from Grisha Levit
+	  <grishalevit@gmail.com>
+	- decode_prompt_string: call prompt_history_number
+	- decode_prompt_string: if expanding PS4 or ${var@P}, make the
+	  command number the same as reported by PS0/PS1/PS2
+
+				   4/12
+				   ----
+support/Makefile.in
+	- clean: remove man2html.o as part of this production instead of
+	  waiting until `distclean'. Reported by chrlis <chrlis@sbrella.com>
+
+subst.c
+	- string_list_pos_params: if we are expanding $* in a context where
+	  IFS is null and expand_no_split_dollar_star is set (no word
+	  splitting), use string_list_dollar_star to force the positional
+	  parameters to be joined without first separating them into a list
+	  and attempting to join them later.  Fixes problem with constructs
+	  like ${var=${*:1}}, pointed out by Grisha Levit
+	  <grishalevit@gmail.com>. This undoes change to @Q from 4/7, so
+	  list_transform change reverted
+
+				   4/19
+				   ----
+builtins.h
+	- added BUILTINS_H include guard
+
+examples/loadables/Makefile.in
+	- install loadables.h as sample include file, along with Makefile.inc
+
+				   4/23
+				   ----
+bashline.c
+	- maybe_make_readline_line: don't try to do anything if the passed
+	  NEW_LINE is NULL.  Report from Jaren Stangret <sirjaren@gmail.com>,
+	  fix from Eduardo Bustamante <dualbus@gmail.com>
+
+				   4/24
+				   ----
+parse.y
+	- xparse_dolparen: if the current token (the last thing read_token
+	  returned to yylex) is shell_eof_token, assume that it is the new
+	  bison lookahead token and clear it. Fixes bug reported by
+	  Werner Fink <werner@suse.de>
+
+				   4/25
+				   ----
+doc/{bash.1,bashref.texi}
+	- cmdhist: clarify that this option only has an effect if history is
+	  enabled. Suggested by Matthew Braun <matthew@powerplug.com>
+
+				   4/26
+				   ----
+jobs.c
+	- wait_for: if a non-interactive shell with job control enabled (set -m)
+	  detects that a foreground job died due to SIGINT, act as if the shell
+	  also received the SIGINT. Prompted by an austin-group-l discussion
+	- waitchld: run SIGCHLD trap for each child exited even if job control
+	  is not enabled when in Posix mode. Prompted by an austin-group-l
+	  discussion
+
+				   4/27
+				   ----
+lib/readline/histfile.c
+	- read_history_range: if the history file is empty, free the history
+	  filename before returning. Report and fix from Eduardo Bustamante
+	  <dualbus@gmail.com>
+
+lib/readline/bind.c
+	- rl_parse_and_bind: make sure there is something, even if it's a
+	  quoted empty string, before the `:' in a key binding.  Report from
+	  Eduardo Bustamante <dualbus@gmail.com>
+	- rl_parse_and_bind: if the right side of a key binding starts with a
+	  quote, make sure there's a matching close quote before treating it
+	  as a macro definition
+	- rl_translate_keyseq: if a key sequence ends with \C- or \M- (or
+	  \C-\M-) make sure we break out of the loop if moving to the character
+	  to be translated is a NUL. Old code did this only in the \C-\M-
+	  case. Report from Eduardo Bustamante <dualbus@gmail.com>
+
+				   4/28
+				   ----
+lib/glob/sm_loop.c
+	- GMATCH: implement a clever technique from glibc that avoids
+	  backtracking past a `*' if we've already chosen to use it and need
+	  matches beyond it.  Look at https://research.swtch.com/glob for a
+	  longer explanation. This results in a significant speedup for globs
+	  with multiple instances of `*', especially with more than 4.
+
+				    5/2
+				    ---
+lib/readline/bind.c
+	- rl_translate_keyseq: make sure a trailing backslash in the key
+	  sequence is preserved. Report from Eduardo Bustamante
+	  <dualbus@gmail.com>
+
+				    5/3
+				    ---
+builtins/builtin.def
+	- builtin_builtin: make sure to set  this_shell_builtin to the builtin
+	  command being executed, overwriting `builtin'. Leave
+	  last_shell_builtin alone.  Fixes bug reported by Luiz Angelo Daros
+	  de Luca <luizluca@gmail.com>
+
+jobs.c
+	- waitchld: modify change of 4/26 to run SIGCHLD traps even if job
+	  control is not enabled
+
+lib/readline/misc.c
+	- rl_get_previous_history: if we didn't find a previous history entry
+	  to use, call rl_maybe_unsave_line before returning because we
+	  aren't going to use the saved line, and it has the same undo list
+	  as rl_undo_list.  Fixes fuzzing bug reported by Eduardo Bustamante
+	  <dualbus@gmail.com>
+	- rl_get_{next,previous}_history: if there is no history list, don't
+	  bother doing anything
+
+				    5/4
+				    ---
+expr.c
+	- popexp: if we error out due to stack underflow, make sure to zero out
+	  expression and lasttp; they may contain undefined values we don't
+	  want evalerror to print
+	- expr_unwind: handle expr_depth decrementing below zero
+	- evalexp: restore the old value of evalbuf even if we error and
+	  longjmp; we may have called evalexp recursively
+	- evalerror: make sure expression is non-NULL before trying to print it.
+	  These fix fuzzing bug reported by Eduardo Bustamante
+	  <dualbus@gmail.com>, happens only in cases where we don't longjmp on
+	  a fatal expansion error
+
+				    5/5
+				    ---
+parse.y
+	- read_token_word: when checking for a word that's a target of a
+	  redirection, we can potentially call valid_array_reference, which
+	  can end up calling the parser recursively. If it does that, we
+	  need to make sure that yylval.word doesn't change, so we set it back
+	  to the_word. Fixes another fuzzing bug
+
+parse.y
+	- arith_for_command: make syntax errors in the arithmetic for command
+	  (signaled by make_arith_for_command returning NULL) more like
+	  language syntax errors by calling YYERROR. Avoids complicated
+	  attempts at error recovery and dealing with NULL returns from
+	  command productions. Pointed out by Eduardo Bustamante
+	  <dualbus@gmail.com>
+
+lib/readline/kill.c
+	- _rl_copy_to_kill_ring: make sure the current slot in the kill ring
+	  has something in it, even if the last command was a kill, before
+	  trying to modify it. Another fuzzing bug
+
+				    5/6
+				    ---
+builtins/read.def
+	- read_builtin: if we see a backslash when not in raw mode (not -r),
+	  only back up `i' when we read the next character if we know we added
+	  a CTLESC the last time through the loop (skip_ctlesc == 0),
+	  especially if i == 0. Another fuzzing bug from Eduardo Bustamante
+	  <dualbus@gmail.com>
+
+				    5/8
+				    ---
+builtins/read.def
+	- read_mbchar: handle zreadn/zreadc/zread returning EOF in the middle
+	  of an incomplete multibyte sequence.  Fixes another fuzzing bug
+	- read_builtin: use mb_cur_max instead of constant 4 when deciding
+	  whether the next character can exceed the number of bytes available
+	  in input_string
+
+lib/readline/input.c
+	- MinGW: include <conio.h> before <io.h>. Fix from Eli Zaretskii
+	  <eliz@gnu.org>
+
+builtins/read.def
+	- read_builtin: if we get input from readline, we need to get the
+	  remainder of a multibyte character from rlbuf instead of calling
+	  read_mbchar. Bug reported by Eduardo Bustamante <dualbus@gmail.com>
+
+				    5/9
+				    ---
+parse.y
+	- token_is_assignment: use the allocated buffer approach in all cases,
+	  not just if we're not using bash malloc. This avoids the assignment
+	  to t[i+1] writing beyond the end of the allocated token if
+	  i == token_buffer_size - 1. Another fuzzing bug
+	- xparse_dolparen: if parse_string returns < 0, we clear out the
+	  current shell_input_line before performing a longjmp, since we're
+	  abandoning parsing of this command.  This is consistent with how
+	  the parser resynchronizes after other syntax errors
+	- GRAMMAR: add 'error yacc_EOF' production to handle a syntax error
+	  that's immediately followed by an EOF after resynchronization.
+	  Fixes another fuzzing bug
+
+				   5/10
+				   ----
+lib/readline/text.c
+	- _rl_set_mark_at_pos: don't let the mark be set to a position < 0.
+	  Fixes a fuzzing bug
+	- rl_exchange_point_and_mark: don't do anything if the mark is already
+	  less than 0
+
+				   5/12
+				   ----
+lib/readline/rlmbutil.h
+	- wchar_t: make sure this is defined as int if multibyte characters
+	  aren't supported
+
+lib/readline/text.c
+	- _rl_change_case: don't force use of ascii toupper and tolower if
+	  isascii returns true; it's not defined to work on characters outside
+	  the 0..255 (really 0..127) range.  Bug reported by
+	  Eduardo Bustamante <dualbus@gmail.com>
+
+				   5/14
+				   ----
+lib/readline/text.c
+	- rl_change_case: handle case where the old and new characters (after
+	  the case change) are not the same number of bytes. Pointed out in
+	  http://lists.gnu.org/archive/html/bug-bash/2015-01/msg00091.html
+
+lib/readline/display.c
+	- expand_prompt: use `ret' as first parameter to _rl_find_prev_mbchar
+	  since that needs the base of the array. Bug from fuzzing reported by
+	  Eduardo Bustamante <dualbus@gmail.com>
+
+				   5/15
+				   ----
+execute_cmd.c
+	- execute_simple_command, execute_arith_command, execute_cond_command,
+	  execute_arith_for_command: adjust the line number when executing a
+	  function interactively so that the first command in the function is
+	  line 1, not line 0, as Posix requires.  Reported by Robert Elz
+	  <kre@bmunnari.OZ.AU>
+	- execute_simple_command, execute_arith_command, execute_cond_command,
+	  execute_arith_for_command: ony adjust the line number when executing
+	  a function interactively if we are not sourcing a file
+	  (sourcelevel == 0), so this is consistent everywhere we adjust the
+	  line number
+
+				   5/16
+				   ----
+bashline.c
+	- bash_directory_completion_hook: when calling split_at_delims to see
+	  whether a ${ or $( is closed, use the right value for `start' relative
+	  to the substring beginning at `$'.  Bug from fuzzing reported by
+	  Eduardo Bustamante <dualbus@gmail.com>
+
+expr.c
+	- expassign: if the call to expcond generates a syntax error in a
+	  context when the shell won't longjmp (like when evaluating $PS1),
+	  it will end up NULL and we need to catch it before calling strlen.
+	  Bug from fuzzing reported by Eduardo Bustamante <dualbus@gmail.com>
+
+examples/bash-completion/
+	- new place to include a current or recent version of the
+	  bash-completion package
+
+				   5/19
+				   ----
+lib/readline/display.c
+	- CHECK_INV_LBREAKS: new versions for multibyte and single-byte chars,
+	  so the multibyte version can check and increase the size of
+	  line_state_invisible->wbsize and line_state_invisible->wrapped_line,
+	  callers who call CHECK_INV_LBREAKS must update
+	  wrapped_line[newlines] when in HANDLE_MULTIBYTE mode. Fuzzing bug
+	  reported by Eduardo Bustamante <dualbus@gmail.com>
+
+				   5/24
+				   ----
+lib/readline/search.c
+	- _rl_nsearch_callback,noninc_search: handle _rl_search_getchar
+	  returning -1 (EOF or read error) by aborting the search.
+	  Fuzzing bug reported by Eduardo Bustamante <dualbus@gmail.com>
+
+				   5/25
+				   ----
+variables.c
+	- localvar_inherit: new variable, controlled by shopt localvar_inherit
+	  option
+	- make_local_variable: if localvar_inherit is set, the new local
+	  variable inherits a previous scope's variable's value, attributes
+	  (except nameref), and dynamic variable information. If a local
+	  variable inherits a value, the local is not invisible
+
+builtins/shopt.def
+	- localvar_inherit: new option
+
+doc/{bash.1,bashref.texi}
+	- localvar_inherit: document new shopt option
+
+				   5/29
+				   ----
+lib/readline/readline.c
+	- _rl_subseq_result: only return -1 and back up the chain if we are
+	  dealing with a result (r) that's already < 0 and we are at the end
+	  of a multi-key sequence. Otherwise, a failing readline command (e.g.,
+	  delete-char at the end of a line) could cause this code to be
+	  executed.  Report from Nuzhna Pomoshch <nuzhna_pomoshch@yahoo.com>
+
+lib/readline/histfile.c
+	- read_history_range: if the file isn't a regular file, return an
+	  error. Bug report from Eduardo Bustamante <dualbus@gmail.com>,
+	  relaying from IRC
+
+				   5/30
+				   ----
+variables.c
+	- set_pwd: if in Posix mode, and PWD appears in initial environment as
+	  an absolute pathname to the current directory, set PWD to the result
+	  of canonicalizing the environment value, or to the physical path if
+	  canonicalization fails. From a suggestion by Eduardo Bustamante
+	  <dualbus@gmail.com>
+
+				   5/31
+				   ----
+builtins/read.def
+	- read_builtin: if -n or -N option is supplied with a 0 argument,
+	  don't attempt to read any characters; bail out right away. Reported
+	  by Eduardo Bustamante <dualbus@gmail.com>, relaying from IRC
+
+				    6/3
+				    ---
+config.h.in
+	- HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC: add define, used by stat-time.h
+	  to construct a timespec from struct stat. Report and fix from
+	  Siteshwar Vashisht <svashisht@redhat.com>
+
+variables.h
+	- att_regenerate: new internal variable attribute: if set, regenerate
+	  dynamic variable's value when it's exported and we are creating the
+	  export environment
+
+variables.c
+	- init_dynamic_variables: LINENO, EPOCHSECONDS, EPOCHREALTIME: set
+	  internal regenerate attribute for these dynamic variables
+	- make_env_array_from_var_list: if a dynamic variable has the
+	  regenerate attribute set, call the dynamic value function to generate
+	  an updated value before placing it in the environment.  From a report
+	  about exporting LINENO from Robert Elz <kre@bmunnari.OZ.AU>
+
+				    6/4
+				    ---
+lib/glob/sm_loop.c
+	- BRACKMATCH: at the matched: label, make sure we get the bracket
+	  character we're looking for (char class, collating symbol. etc.)
+	  before we decrement the count of braces we're looking for. Eventually
+	  we could do something about badly-formed bracket expressions
+
+				    6/7
+				    ---
+lib/readline/histlib.h
+	- strchr: only declare if  __STDC__ is not defined, since we already
+	  include <string.h>.  Report from Chi-Hsuan Yen <yan12125@gmail.com>
+
+				    6/9
+				    ---
+lib/readline/display.c
+	- update_line: when wrapping lines with multibyte chars at the end of
+	  the new line being wrapped, make sure we copy the NULL byte in old
+	  when moving the contents of old around. Fuzzing bug reported by
+	  Eduardo Bustamante <dualbus@gmail.com>
+
+lib/readline/mbutil.c
+	- _rl_get_char_len: use MB_CUR_MAX in the call to mbrlen; there's no
+	  need to look at the rest of the string when we're just interested in
+	  the length of a single character
+
+				   6/12
+				   ----
+jobs.c
+	- wait_for: when waiting for the next child to exit (ANY_PID), make
+	  sure to restore the old SIGINT handler before returning.  Fixes
+	  https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=864649
+
+				   6/14
+				   ----
+lib/readline/display.c
+	- expand_prompt: make sure `ret' is NULL-terminated before calling
+	  _rl_prev_mbchar_internal, since that calls strlen, which requires
+	  the passed string to be NULL-terminated. Another fuzzing bug.
+
+				   6/15
+				   ----
+lib/readline/isearch.c
+	- _rl_isearch_fini: use rl_replace_line instead of strcpy so rl_end
+	  gets set right
+	- _rl_isearch_fini: after restoring rl_point, call _rl_fix_point so
+	  we don't set rl_point > rl_end. Fixes a fuzzing bug
+
+lib/readline/mbutil.c
+	- _rl_find_next_mbchar_internal: if _rl_adjust_point returns < 0,
+	  just punt, treat the value as a byte, and advance point by 1
+
+lib/readline/util.c
+	- rl_tilde_expand: rearrange code in the whitespace loop so that
+	  `start' gets tested first and we don't try to dereference
+	  rl_line_buffer[-1]. Another fuzzing bug from dualbus@gmail.com
+
+bashline.c
+	- bash_dequote_filename: make sure that pointers that are used as
+	  indices into sh_syntaxtab are cast to unsigned char first, to
+	  avoid problems with signed chars > 128. Fixes a fuzzing bug.
+
+lib/readline/kill.c
+	- _rl_copy_to_kill_ring: when reallocating the kill ring, make sure to
+	  allocate one more than the max number of kills so the loop that
+	  copies the kill ring entries down runs right (and to mirror the
+	  initial allocation). Fixes a fuzzing bug.
+
+lib/readline/isearch.c
+	- _rl_isearch_dispatch: make sure that cxt->sline_index never goes < 0
+	  even when searching a line in reverse. Fixes a fuzzing bug
+
+				   6/16
+				   ----
+parse.y
+	- xparse_dolparen: short-circuit immediately if passed a empty string
+
+lib/readline/display.c
+	- update_line: when wrapping multibyte characters, make sure we deal
+	  with WCWIDTH returning -1. Fixes a fuzzing bug
+
+				   6/17
+				   ----
+execute_cmd.c
+	- execute_coproc: make sure `invert' is set before trying to use it
+	  when returning failure on invalid coproc name.  Report and fix from
+	  Eduardo Bustamante <dualbus@gmail.com>
+	- execute_command_internal: make sure execute_coproc sets
+	  last_command_exit_value if it returns failure, so an invalid name
+	  can set $? = 1.  Report and fix from Eduardo Bustamante
+	  <dualbus@gmail.com>
+
+lib/readline/display.c
+	- update_line: make sure all references to `wrapped_line' are wrapped
+	  with #ifdef HANDLE_MULTIBYTE.  Report and fix from Eduardo Bustamante
+	  <dualbus@gmail.com>
+
+lib/readline/vi_mode.c
+	- _rl_vi_change_char: don't use rl_point++ when you mean to move
+	  forward a character; use _rl_vi_append_forward to account for
+	  multibyte characters and take vi end of line handling into account
+	- _rl_vi_last_replacement: now an array of chars whether we are
+	  using multibyte chars or not. If we're not, the character we read
+	  to use as the replacement is saved as the first element of the array
+	- rl_vi_change_char,_rl_vi_callback_change_char: changes to deal with
+	  _rl_vi_last_replacement being an array.  Fixes bug reported by
+	  Eduardo Bustamante <dualbus@gmail.com>
+
+lib/readline/mbutil.c
+	- _rl_get_char_len: look at at most MB_CUR_MAX characters, but maybe
+	  fewer if the length of the string is less
+
+builtins/bind.def
+	- unbind_keyseq: new function for the -r option; checks whether the
+	  key sequence is actually bound before trying to bind it to NULL.
+	  Partial fix for https://savannah.gnu.org/support/?109329
+
+parse.y
+	- augment `error yacc_EOF' production to call YYABORT in non-interactive
+	  shells or calls to parse_and_execute (eval, command substitution,
+	  etc.) Fixes bug reported by Martijn Dekker <martijn@inlv.org>
+
+				   6/19
+				   ----
+bashline.c
+	- edit_and_execute_command: don't add rl_line_buffer to the history
+	  list if it's empty; consistent with how other code treats an empty
+	  line
+
+execute_cmd.c
+	- execute_builtin: make sure to preserve the temporary env across the
+	  execution of the `read' builtin or `fc' builtin if HISTORY is
+	  defined, in case `read -e' calls edit-and-execute-command.  Should
+	  have no side effects. Reported by Eduardo Bustamante
+	  <dualbus@gmail.com>
+
+general.c
+	- line_isblank: new function: returns true if passed string is composed
+	  entirely of blanks
+
+general.h
+	- line_isblank: new extern declaration
+
+parse.y
+	- history_delimiting_chars: return "" for a blank line, since there's
+	  nothing to delimit with `;'
+
+				   6/21
+				   ----
+jobs.c
+	- wait_for: make sure to call restore_sigint_handler before returning
+	  if we return out of the loop due to no children. Report from
+	  Eduardo Bustamante <dualbus@gmail.com>
+
+subst.c
+	- expand_word_internal: if split_on_spaces is set, and the word is
+	  unquoted, and IFS is null, split the results of the previous steps
+	  on $' \t\n' instead of just ' '. This relies on the previous steps
+	  quoting the portions of the word that should not be split.  Fixes
+	  bug reported by Kevin Brodsky <corax26@gmail.com>
+
+expr.c
+	- evalexp: after running expr_unwind, make sure we reset expr_depth
+	  to 0 for the next call
+	- expr_streval: if after a call to get_array_value (which can call
+	  the expression evaluator recursively) we discover that expr_depth
+	  is less than it was before we called it, we assume there has been
+	  some kind of error and an expr_unwind, so we treat it as an
+	  error and either longjmp back to the expression top level or return
+	  0 immediately. Fixes bug reported by Eduardo Bustamante
+	  <dualbus@gmail.com>
+
+				   6/23
+				   ----
+doc/{bash.1,bashref.texi}
+	- add text noting that $* and ${array[*]} (unquoted) can also expand
+	  to multiple words
+
+				   6/29
+				   ----
+general.[ch]
+	- default_columns: new function, returns the value of COLUMNS, or
+	  refreshes it if check_window_size is set and COLUMNS is unset. By
+	  default, it returns 80
+
+execute_cmd.c
+	- select_query: use default_columns() instead of fetching value of
+	  COLUMNS directly
+
+builtins/help.def
+	- show_builtin_command_help: use default_columns() instead of fetching
+	  value of COLUMNS directly
+
+				   6/30
+				   ----
+builtins/read.def
+	- read_builtin: call QUIT during the read loop, just in case we get a
+	  signal we should act on that didn't cause read to be interrupted.
+	  Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1466737
+	- read_builtin: if -n or -N is supplied with a 0 argument, try a zero-
+	  length read to detect errors and return failure if that read returns
+	  a value < 0. Suggested by dualbus@gmail.com
+
+				    7/4
+				    ---
+bashhist.c
+	- maybe_add_history: keep track of whether the current line is a shell
+	  comment, even if we're not adding it because it's in a multi-line
+	  command, so we use appropriate delimiters between it and any
+	  subsequent lines. Fixes bug reported by Grisha Levit
+	  <grishalevit@gmail.com> back on 2/28/2017
+
+bashline.c
+	- operate_and_get_next: if given an explicit argument, use that to
+	  choose which line in the history to use.
+
+lib/readline/doc/rluser.texi,doc/bash.1
+	- operate-and-get-next: document new effect of explicit numeric arg
+
+lib/readline/complete.c
+	- fnprint: make sure print_len is initialized before using it on
+	  systems without multibyte character support.  Report and fix from
+	  Juan Manuel Guerrero <juan.guerrero@gmx.de>
+
+				    7/6
+				    ---
+builtins/printf.def
+	- PRETURN,printf_builtin: check variable returned by bind_printf_variable,
+	  return failure if that indicates we can't perform an assignment
+	  because the variable is marked readonly or noassign. Fixes bug
+	  reported by Arnaud Gaillard <arnaud.mgaillard@gmail.com>
+
+				    7/7
+				    ---
+lib/readline/text.c
+	- rl_quoted_insert: new feature: a negative argument means to insert
+	  the next -COUNT characters using quoted-insert. Original feature
+	  from Jason Hood <jadoxa@yahoo.com.au>. Still needs work on
+	  redisplay
+	- _rl_insert_next_callback: implement support for negative arguments
+	  similar to rl_quoted_insert: we just insert one at a time and keep
+	  increasing the count until it hits 0
+
+lib/readline/misc.c
+	- _rl_arg_callback: if the return value from _rl_arg_dispatch indicates
+	  we should keep reading a numeric argument, update the message with
+	  the new arg value
+
+				    7/8
+				    ---
+lib/readline/signals.c
+	- _rl_handle_signal: make sure all uses of any of the job control
+	  signals are protected by a check for SIGTSTP being defined.  Report
+	  from Juan Manuel Guerrero <juan.guerrero@gmx.de>
+
+				   7/11
+				   ----
+lib/readline/vi_mode.c
+	- rl_vi_replace: when making the new keymap for vi replacement mode,
+	  make sure that ANYOTHERKEY is set correctly, otherwise some input
+	  will cause _rl_dispatch to return -2 to the top level.  Fixes fuzzing
+	  bug reported by Ben Wong <benjamin.a.wong@gmail.com>
+
+				   7/19
+				   ----
+builtins/read.def
+	- struct ttsave: make the attrs member a struct, not a pointer, to force
+	  a structure copy that will survive a longjmp to another context.
+	  Leaving it as a pointer to a local struct is not portable
+
+				   9/10
+				   ----
+execute_cmd.c
+	- execute_builtin: make sure that we set up the unwind-protect for
+	  pop_scope (temporary_env is non-zero) so that the temporary env
+	  is propagated to the current environment only for special builtins
+	  (source/eval/unset) not run by the command builtin
+	  (flags & CMD_COMMAND_BUILTIN == 0).  Fixes bug reported by
+	  Martijn Dekker <martijn@inlv.org>
+
+				   9/17
+				   ----
+builtins/printf.def
+	- asciicode: don't use mblen to check whether or not a character is a
+	  valid multibyte character; use mbtowc right away and then inspect
+	  the return value.  Fixes bug reported by Stephane Chazelas
+	  <stephane.chazelas@gmail.com>
+
+				   9/27
+				   ----
+{jobs,subst}.h
+	- move declaration of last_command_subst_pid to subst.h, since it's
+	  declared in subst.c and doesn't depend on job control. Reported by
+	  Martijn Dekker <martijn@inlv.org>
+
+builtins/read.def,variables.c
+	- fixed a couple of problems (READLINE, ARRAY_VARS) that prevented
+	  the minimal config from building
+
+				   10/1
+				   ----
+parse.y
+	- special_case_tokens: if we are returning DO in a case where the last
+	  two tokens read are `FOR' and `WORD' make sure we decrement
+	  expecting_in_token.  Fixes bug reported by Martijn Dekker
+	  <martijn@inlv.org>
+
+				   10/4
+				   ----
+subst.c
+	- expand_string_for_rhs: now takes an additional PFLAGS argument from
+	  its caller (one so far); passes that through to call_expand_word_internal
+	  as W_ASSIGNRHS. Fixes bug reported by Martijn Dekker
+	  <martijn@inlv.org>
+	- expand_string_for_rhs: expanding b in ${a[:]=b} is now done as if
+	  b were the rhs of an assignment statement. This means that splitting
+	  isn't done, but tilde expansion is performed as if the statement
+	  were `a=b'. Fixes splitting bug with $* reported by Martijn Dekker
+	  <martijn@inlv.org>
+
+command.h
+	- W_NOASSNTILDE: new word flag, means to not perform tilde expansion
+	  following a `:' even if the word has the W_ASSIGNRHS flag enabled
+
+subst.c
+	- expand_word_internal: if we see a `:' with the W_NOASSNTILDE flag
+	  set, just add the character and inhibit any subsequent tilde
+	  expansion. Currently not set anywhere, but it could be set in
+	  expand_string_for_rhs to satisfy its peculiar semantics
+
+				   10/6
+				   ----
+lib/sh/casemod.c
+	- sh_modcase: convert even single-byte wide characters to wide upper
+	  or lowercase equivalents to accommodate locales where single-byte
+	  characters have multibyte upper and lower case conversions. Bug
+	  reported by Stephane Chazelas <stephane.chazelas@gmail.com>
+
+				   10/7
+				   ----
+doc/{bash.1,bashref.texi}
+	- slight changes to the description of command_not_found_handle to
+	  clarify that it's executed in a separate execution environment,
+	  just like if the command was found. Reported by Martijn Dekker
+	  <martijn@inlv.org>
+
+				   10/8
+				   ----
+lib/readline/doc/{history.3,hstech.texi}
+	- history_get: clarify the range of valid values for the OFFSET
+	  argument. From a report by Kevin Ryde <user42_kevin@yahoo.com.au>
+
+				   10/21
+				   -----
+subst.c
+	- expand_string_for_rhs: set W_NOASSNTILDE if the operator is `='
+	  for backwards compatibility with bash-4.4
+
+shell.c
+	- main: set positional parameters before running the startup files,
+	  so the startup files can inspect $@.  Often-requested feature,
+	  most recently from Stephane Chazelas <stephane.chazelas@gmail.com>
+
+				   10/27
+				   -----
+doc/{bash.1,bashref.texi}
+	- Arrays: add some clarifying language to make it clear that array
+	  references that don't use the ${a[s]} syntax are subject to
+	  globbing when passed as arguments to commands such as unset, and
+	  should be quoted for safety. Change prompted by a report from
+	  Eli Barzilay <eli@barzilay.org>
+
+parse.y
+	- parse_comsub: make sure we don't run off the end of the `ret'
+	  buffer when checking for the here doc delimiter.  Report from
+	  Jakub Wilk <jwilk@jwilk.net>, the result of a fuzzing test. Pointer
+	  to place for the fix from Eduardo Bustamante <dualbus@gmail.com>
+
+				   10/30
+				   -----
+builtins/pushd.def
+	- get_directory_stack: make sure the current directory (element 0 of
+	  the stack) is passed to polite_directory_format under the same
+	  conditions as the rest of the stack entries (flags & 1). Otherwise
+	  something like `cd ${DIRSTACK[0]}' will fail. Fixes bug reported
+	  by Steve Jones <sjml@slohj.org>
+
+builtins/declare.def
+	- declare_internal: when checking for a `[' to see whether or not this
+	  is an array variable declaration (declare -a foo[12]), make sure
+	  we don't do the check if we're just dealing with shell functions.
+	  Bug and pointer to fix from PJ Eby <pje@telecommunity.com>
+
+				   11/1
+				   ----
+parse.y
+	- parse_comsub: if we read a four-character word followed by a break
+	  character, and that word is not one of the reserved words, set
+	  lex_rwlen to 0 since we are no longer in a reserved word. It only
+	  hurts if another break character immediately follows, so that test
+	  succeeds again. Turn off the RESWDOK flag only if it's not a shell
+	  metacharacter, too. Fixes bug reported by Kjetil Torgrim Homme
+	  <kjetilho@scribus.ms.redpill-linpro.com>
+
+				   11/3
+				   ----
+lib/readline/isearch.c
+	- _rl_isearch_dispatch: if we are searching in reverse order, let
+	  sline_index go to -1 to avoid searching the same line twice. It
+	  gets reset right after that, so there's no danger of indexing into
+	  the history line with a negative index.
+
+				   11/7
+				   ----
+execute_cmd.c
+	- time_command: only restore command->flags if CODE indicates we didn't
+	  perform a longjmp back to top_level. If we did, `command' has already
+	  been freed. Fixes bug reported on savannah by 
+	  ukuvbu oibws <xyzdr4gon333@googlemail.com>
+	  https://savannah.gnu.org/support/?109403
+
+				   11/10
+				   -----
+lib/sh/unicode.c
+	- u32cconv: make sure to initialize localconv to -1 (error) in case
+	  we switch from a utf-8 locale to something else and call
+	  iconv_close. Report from Egmont Koblinger <egmont@gmail.com>; fix
+	  from Eduardo Bustamante <dualbus@gmail.com>
+
+				   11/16
+				   -----
+subst.c
+	- parse_comsub: istring_index should be a size_t to avoid integer
+	  overflow when allocating large pieces of memory. Report and fix
+	  from Siteshwar Vashisht <svashisht@redhat.com>, originally based on
+	  http://lists.gnu.org/archive/html/bug-bash/2017-11/msg00047.html
+
+				   11/24
+				   -----
+lib/readline/bind.c
+	- rl_empty_keymap: new public function, returns non-zero if there are
+	  no keys bound in the keymap passed as an argument
+
+lib/readline/readline.h
+	- rl_empty_keymap: new public extern declaration
+
+lib/readline/doc/rltech.texi
+	- rl_empty_keymap: document new function
+
+lib/readline/bind.c
+	- rl_generic_bind: keep track of the previous keymap and previous
+	  index in a multi-key key sequence so we can remove an empty terminal
+	  keymap and remove a previous override to ANYOTHERKEY. Right now,
+	  this only works for one previous keymap level. Inspired by a report
+	  from Clark Wang <dearvoid@gmail.com>
+
+				   11/25
+				   -----
+lib/readline/display.c
+	- _rl_update_final: make sure that computing the length of the visible
+	  bottom line (botline_length) takes any invisible characters in the
+	  prompt into account (woff). This value is used as part of the check
+	  whether or not we want to remove the line-wrapping indicator on
+	  terminals like xterm
+	- _rl_update_final: when removing the line-wrapping indicator on xterm,
+	  make sure we take invisible characters in the prompt (woff) into
+	  account when computing the character in the rightmost physical
+	  screen position. Fixes cosmetic line-wrapping issue reported by
+	  Egmont Koblinger <egmont@gmail.com>
+
+				   11/27
+				   -----
+lib/sh/ufuncs.c
+	- fsleep: if using select to implement sleep, use restart after
+	  a signal interrupts the select and handle pending signals. If
+	  pselect is available, use that instead and block SIGCHLD while
+	  pselect is executing.
+	  Fixes report from Thiruvadi Rajaraman <trajaraman@mvista.com>
+
+				   11/28
+				   -----
+lib/readline/signals.c
+	- rl_check_signals: new public function: a wrapper for RL_CHECK_SIGNALS
+	  that can be used by applications that install a wrapper for
+	  rl_getc (rl_getc_function) so they can respond to signals that
+	  arrive while waiting for input in the same way as rl_getc. The app
+	  can use rl_pending_signal() to get the most recently-received
+	  signal. From a discussion about Gnuplot initiated by
+	  Rin Okuyama <rokuyama@rk.phys.keio.ac.jp>
+
+lib/readline/readline.h
+	- rl_check_signals: new extern declaration
+
+lib/readline/doc/rltech.texi
+	- rl_check_signals: document new public function
+
+variables.c
+	- set_pwd: test for and force an inherited OLDPWD to be a directory
+	  if OLDPWD_CHECK_DIRECTORY is defined in config-top.h (it is by
+	  default). Issue raised by Mikulas Patocka <mikulas@twibright.com>
+
+config-top.h
+	- OLDPWD_CHECK_DIRECTORY: new define, defined to 1 by default
+
+				   11/29
+				   -----
+Makefile.in
+	- pathexp.o: add dependencies on libintl.h.  Reported by
+	  Ross Burton <ross@burtonini.com>
+
+				   12/1
+				   ----
+lib/sh/ufuncs.c
+	- fsleep: add blocking and releasing SIGCHLD using sigprocmask
+	  around call to select(2) even if pselect(2) is not available
+
+				   12/3
+				   ----
+execute_cmd.c
+	- coproc_setstatus: new utility function, take a pointer to a coproc
+	  and a status and mark the coproc as dead and having been reaped
+	  with that status. Used by child processes who want to invalidate
+	  the coproc's pid
+
+				   12/5
+				   ----
+subst.c
+	- process_substitute: instead of just having a flag to denote that a
+	  file descriptor is connected to a process substitution, store the
+	  pid of the child process (still needs work)
+	- find_procsub_child,set_procsub_status,reap_procsubs: utility
+	  functions to allow the job control code to detect that a process
+	  substitution child has died and deallocate the file descriptors
+	  or pathname
+
+subst.h
+	- find_procsub_child,set_procsub_status,reap_procsubs: extern
+	  declarations
+
+nojobs.c
+	- set_pid_status: if we are reaping a process substitution, call
+	  set_procsub_status to record the fact
+
+jobs.c
+	- waitchld: if we are reaping a process substitution, call
+	  set_procsub_status to record the fact. Doesn't really do anything
+	  yet
+
+				   12/6
+				   ----
+execute_cmd.c
+	- execute_command: don't call unlink_fifo_list if we're in the
+	  middle of executing a list of commands (executing_list != 0).
+	  Partial fix for bug reported by Stephane Chazelas
+	  <stephane.chazelas@gmail.com>
+	- execute_simple_command: don't close process substitution file
+	  descriptors in the parent after forking children in a pipeline;
+	  defer until pipeline completes, since parent may have inherited
+	  fds from a calling scope (e.g., via `.'). EXPERIMENTAL
+	- execute_disk_command: don't close process substitution file
+	  descriptors in the parent after forking the child. EXPERIMENTAL
+
+				   12/7
+				   ----
+doc/bash.1,lib/readline/doc/{readline.3,rluser.texi}
+	- show-mode-in-prompt: clarify that this must be enabled before the
+	  vi and emacs mode strings are prefixed to the prompt.  Report from
+	  Rob Foehl <rwf@loonybin.net>
+
+				   12/8
+				   ----
+execute_cmd.c
+	- execute_coproc: don't warn about an existing coproc if the write and
+	  read file descriptors are unusable (-1), as they will be after a
+	  call to coproc_closeall in a subshell. Fixes spurious warning
+	  reported by Tobias Hoffmann <lfile-list@thax.hardliners.org>
+
+jobs.c
+	- bgp_resize: avoid overflow when calculating the new size if the
+	  child process limit is something ridiculously large. Report and
+	  fix from Natanael Copa <ncopa@alpinelinux.org>
+
+execute_cmd.c
+	- execute_builtin_or_function: if we return via the return builtin, we
+	  don't get a chance to free the saved fifo list, so add an unwind-
+	  protect to make sure it happens. Part of fix for leak reported by
+	  Oyvind Hvidsten <oyvind.hvidsten@dhampir.no>
+	- execute_command_internal: if we unwind via the return builtin (e.g.,
+	  we execute a function which then returns via the return builtin to
+	  a previous function), we don't free the saved fifo list, so add an
+	  unwind-protect to make sure the free happens. Rest of fix for leak
+	  reported by Oyvind Hvidsten <oyvind.hvidsten@dhampir.no>
+
+subst.c
+	- add_fifo_list: for the FIFO case (no /dev/fd), make sure we
+	  initialize the new members of the fifo list after xrealloc
+
+				   12/9
+				   ----
+subst.c
+	- dev_fd_list: now a list of type `pid_t' so we can store process
+	  associated with the pipe fd into the right element; change all
+	  necessary functions (copy_fifo_list, add_fifo_list)
+	- process_substitute: store pid of child process into the right
+	  index in dev_fd_list after opening the pipe. Process ID of -1 means
+	  process has been reaped and fd needs to be closed (or FIFO needs to
+	  be unlinked); value of 0 means slot is unused
+
+jobs.c
+	- wait_for_background_pids: call reap_procsubs to make sure we clean
+	  up all reaped process substitutions before trying to wait for
+	  everything (still needs work)
+
+tests/{run-procsub,procsub.{tests,right}}
+	- new file, tests of process substitution that have failed in the past
+
+				   12/10
+				   -----
+jobs.c
+	- wait_for_background_pids: warn if one of the jobs is stopped
+
+subst.c
+	- wait_procsubs: new function, call wait_for for every "live" process
+	  substitution
+
+jobs.c
+	- wait_for_background_pids: call wait_procsubs to reap any living
+	  process subsitutions
+
+				   12/13
+				   -----
+lib/readline/bind.c
+	- parser_if: add support for testing the readline version, using the
+	  full set of arithmetic comparison operators (and supporting both
+	  = and ==), using version numbers of the form major[.[minor]]
+
+				   12/14
+				   -----
+subst.[ch]
+	- string_list_dollar_star: now takes QUOTED and PFLAGS arguments like
+	  string_list_dollar_at, changed all callers. Not used yet.
+
+				   12/16
+				   -----
+subst.c
+	- param_expand: broke out cases of expanding unquoted (quoted == 0)
+	  $* on the rhs of an assignment statement (pflags & PF_ASSIGNRHS)
+	  with various values of IFS (unset, null, set to non-null value) to
+	  capture the expansion subtleties. From a report back on 11/24 by
+	  Martijn Dekker <martijn@inlv.org>
+
+				   12/17
+				   -----
+array.h
+	- set_element_value: new define, sets array element AE to VALUE
+
+variables.c
+	- set_pipestatus_array: use set_element_value where appropriate
+
+				   12/18
+				   -----
+subst.c
+	- parameter_brace_find_indir: when expanding the indirect parameter
+	  to find the eventual variable name, we don't perform word splitting.
+	  Make sure this does the right thing for * and @.  Fixes bug
+	  reported by isabella parakiss <izaberina@gmail.com>
+
+				   12/19
+				   -----
+doc/{bash.1,bashref.texi}
+	- indirect expansion: make sure to note that the value of the indirect
+	  variable does not undergo word splitting as one of its expansions,
+	  as in fix from 12/18
+
+				   12/22
+				   -----
+subst.c
+	- parameter_brace_expand_rhs: make sure the value this function returns
+	  when OP is `=' is quoted appropriately, as the callers expect. More
+	  changes from Posix interp 221. Fixes report from Martijn Dekker
+	  <martijn@inlv.org>
+
+variables.c
+	- assign_hashcmd: if running in a restricted shell, make sure the
+	  target of the hash assignment can be found via a $PATH search, to
+	  prevent users assigning commands to the hash table they would not
+	  ordinarily have access to. Fixes issue raised by Drew Parker
+	  <andrew.s.parker2@gmail.com>
+
+builtins/hash.def
+	- hash_builtin: if running in a restricted shell, make sure the
+	  pathname target of `hash -p' can be found via a $PATH search, to
+	  prevent users assigning commands to the hash table they would not
+	  ordinarily have access to.
+
+				   12/27
+				   -----
+array.c,arrayfunc.c,...
+	- many changes to clean up unused variables and functions. From a
+	  report from Siteshwar Vashisht <svashisht@redhat.com>
+
+				   12/28
+				   -----
+lib/readline/terminal.c
+	- _rl_term_clrscroll: save the `E3' termcap capability, which clears
+	  the scrollback buffer where supported. Unused right now
+
+lib/readline/rlprivate.h
+	- _rl_term_clrscroll: extern declaration
+
+lib/readline/bind.c
+	- parser_if: added simple variable comparison capability. Allowable
+	  operators are `=', `==', and `!='; boolean variables must be
+	  compared to either `on' or `off'; variable names must be separated
+	  from the operator by whitespace
+
+doc/bash.1,lib/readline/doc/{rluser.texi,readline.3}
+	- document new `if variable comparison value' construct
+
+				 1/2/2018
+				 --------
+lib/glob/sm_loop.c
+	- EXTMATCH: when matching against !(patlist), if a filename beginning
+	  with a `.' does not match any of the patterns in patlist, don't
+	  return it as a match if leading dots need to be matched explicitly
+	  (flags & FNM_PERIOD). Report from Eric Cook <llua@gmx.com>
+
+				    1/3
+				    ---
+variables.[ch]
+	- bind_function_def: takes an additional flags argument. If FLAGS&1,
+	  overwrite any existing function_def hash table entry; if FLAGS==0,
+	  leave any existing function_def alone.
+
+make_cmd.c
+	- make_function_def: call bind_function_def with flags == 0
+
+execute_cmd.c
+	- execute_intern_function: call bind_function_def with flags == 1 so
+	  we have function_def information that's correct for where the
+	  function is defined, not just where it's last parsed. Fixes report
+	  from Bruno Vasselle <bruno.vasselle@laposte.net>; final piece of
+	  fix from 12/15/2011
+
+				    1/4
+				    ---
+subst.c
+	- param_expand: deal with string_list_dollar_star returning NULL.
+	  Fixes bug reported by Martijn Dekker <martijn@inlv.org>
+
+builtins/history.def
+	- history_builtin: enabled code that performs range deletion
+
+				    1/5
+				    ---
+subst.c
+	- do_assignment_internal: if performing a compound assignment, make
+	  sure to pass ASS_CHKLOCAL flag to do_compound_assignment if the
+	  assignment word has the W_CHKLOCAL flag set
+	- do_compound_assignment: honor ASS_CHKLOCAL flag and check for an
+	  existing local variable before creating or modifying a global
+	  variable
+
+builtins/declare.def
+	- declare_internal: new (undocumented so far) option: -G. Means to
+	  act on global variables (create, modify) if no local variable is
+	  found with the specified name
+	- declare_find_variable: new declare-specific wrapper functon for
+	  declare builtin; obeys -g and -G options in one place
+	- declare_internal: if no variable is found after following any nameref
+	  chain, look up the variable using declare_find_variable to honor the
+	  -G option. XXX - so far, this is the only place that function is used
+
+subst.c
+	- shell_expand_word_list: before calling make_internal_declare, add
+	  'G' to the options list if W_CHKLOCAL is set in the word's flags.
+	  This makes builtins like `readonly' that modify local variables in
+	  a function behave the same for scalar and array variables
+
+				   1/11
+				   ----
+parse.y
+	- shell_getc: move code that decides whether to append a space to an
+	  alias expansion here from mk_alexpansion, so we can inhibit adding
+	  a space if we're currently parsing a single or double quoted string
+
+				   1/12
+				   ----
+
+parse.y
+	- clear_string_list_expander: take a pointer to an alias that's about
+	  to be freed and make sure there aren't any pointers to it in the
+	  list of pushed strings. If there are, zero it out in the pushed
+	  string list to avoid referencing freed memory in pop_string()
+
+alias.c
+	- free_alias_data: if an alias being freed is currently being expanded,
+	  call clear_string_list_expander to remove references to it from the
+	  list of pushed strings
+
+				   1/14
+				   ----
+pcomplib.c
+	- progcomp_search: add code to look up an alias for the CMD argument
+	  and return the completions for the first word of that alias if one
+	  is found. Just a start at completing aliases, a much-requested
+	  feature
+
+pcomplete.h
+	- COPT_LASTUSER: last flag value used by user-settable completion
+	  options
+	- PCOMP_RETRYFAIL, PCOMP_NOTFOUND: new #defines, possible return values
+	  from programmable_completions in FOUNDP argument. Moved RETRYFAIL
+	  define here from pcomplete.c to avoid collisions with user-settable
+	  option values (COPT_*)
+
+				   1/15
+				   ----
+pcomplete.c
+	- programmable_completions: if we don't find any completions for a
+	  command, and RETRY is 0, see if the command is a defined alias,
+	  expand it, and try to expand the first word of the value as a
+	  command, and find any programmable completions for it. Here right
+	  now, could be moved to attempt_shell_completion later if we need
+	  to do more analysis of the expanded line. We'll see how it works
+	  in practice. (Disabled for now.)
+
+				   1/16
+				   ----
+parse.y
+	- grammar: when timing the null command, make sure to turn off the
+	  flags in parser_state (PST_REDIRLIST) that make_simple_command sets
+	  when given a NULL second argument, since it assumes that it's going
+	  to turn those off when it gets the next word of the simple command
+	  (which it never gets in this case).  Fixes bug reported by
+	  Anti Räis <antirais@gmail.com>
+
+				   1/19
+				   ----
+lib/readline/rltty.c
+	- prepare_terminal_settings (termios/termio): if there is a function
+	  bound to the VDISCARD character in the current keymap, set VDISCARD
+	  to _POSIX_VDISABLE while readline is active. From a report from
+	  Rhialto <rhialto@falu.nl>
+
+				   1/22
+				   ----
+builtins/history.def
+	- histtime: check whether or not localtime() returns NULL, and make
+	  sure we only call strftime() with a valid struct tm. This can happen
+	  when the timestamps in the history file overflow a time_t. Fixes bug
+	  reported by Luke Dashjr <luke@dashjr.org>
+
+bashline.c
+	- edit_and_execute_command: if we're in vi editing mode, make sure
+	  we end up in insert mode after executing the commands from the
+	  edited file. This seems to be what other shells do. Report from
+	  Stan Marsh <gazelle@xmission.com>
+
+				   1/26
+				   ----
+bashline.c
+	- command_word_completion_function: match alias and shell function
+	  names case-insensitively if the readline completion-ignore-case
+	  variable is set. Inspired by report from <odnehel@gmail.com>
+
+lib/readline/display.c
+	- update_line: when performing a dumb update after wrapping the line
+	  (usually due to printing the prompt), make sure we adjust
+	  _rl_last_c_pos if there are invisible characters in prompt lines
+	  other than the first (we assume those invisible characters are in
+	  the last line, which is nearly always the case). We adjust by the
+	  total number of invisible chars less the number of invisible chars
+	  in the first prompt line. From a report in
+	  https://bugs.launchpad.net/ubuntu/+source/bash/+bug/1745273
+
+execute_cmd.c
+	- execute_command_internal: if redirections attached to a compound
+	  command fail, make sure we discard the `internal_fifos' unwind-
+	  protect frame after freeing the copied fifo_list and before returning
+
+				   1/30
+				   ----
+lib/readline/rlprivate.h
+	- BRACK_PASTE_FINI: add \r to the end of the string to avoid problems
+	  with the tty driver thinking the cursor was in the wrong position.
+	  Fixes issue reported by Egmont Koblinger <egmont@gmail.com>
+
+				   1/31
+				   ----
+lib/sh/zread.c
+	- zread,zreadintr: call check_signals() before calling read() to
+	  minimize the race window between signal delivery, signal handling,
+	  and a blocking read(2). Partial fix for FIFO read issue reported by
+	  Oyvind Hvidsten <oyvind.hvidsten@dhampir.no>
+
+doc/{bash.1,bashref.texi}
+	- shopt: document `assoc_expand_once' shell option
+
+				    2/1
+				    ---
+config-top.h
+	- DONT_REPORT_SIGTERM: define, so non-interactive shells will no
+	  longer print termination messages for child processes killed by
+	  SIGTERM
+
+				    2/6
+				    ---
+lib/readline/text.c
+	- rl_insert: don't attempt to optimize typeahead if we are only reading
+	  a fixed number of characters (rl_num_chars_to_read > 0)
+
+redir.c
+	- redir_special_open: if the shell is restricted, return a
+	  RESTRICTED_REDIRECT error for attempts to open /dev/tcp and /dev/udp
+	  sockets.  Inspired by report from Blake Burkhart <bburky@bburky.com>
+	- do_redirection_internal: if redir_open returns RESTRICTED_REDIRECT,
+	  return that right away (instead of errno) so we can print a better
+	  error message
+
+				   2/11
+				   ----
+jobs.c
+	- bgp_resize: fix problems with (pid_t) overflow when calculating new
+	  size for table when js.c_childmax is near the limit of a pid_t
+	  (e.g., 2**31 - 1 on a 32-bit system, or 2**63-1 on a system with
+	  32-bit pid_t). Fixes hang reported by Natanael Copa
+	  <ncopa@alpinelinux.org> based on his patch from 12/8.
+	- bgp_resize: cap max table size for bgpids at MAX_CHILD_MAX (32768)
+
+include/typemax.h
+	- TYPE_MINIMUM, TYPE_MAXIMUM: updated definitions from coreutils-8.29,
+	  silences some compiler warnings
+
+				   2/14
+				   ----
+Makefile.in
+	- maybe-clean: use cd and pwd -P to test whether or not two directory
+	  names identical, since topdir = '.' and BUILD_DIR = full pathname
+	  when you use something like `bash ./configure'. Problem reported by
+	  Michael Felt <aixtools@gmail.com>
+
+subst.c
+	- split_at_delims: if SD_NOQUOTEDELIM is in the flags argument, don't
+	  treat `'' and `"' as candidates for possible sequences of delimiters,
+	  even if they're part of the delimiter set (the delims argument).
+	  Fixes problem with completing lines like `foo --bar='quux baz' xx'
+	  reported by Nick Patavalis <npat@efault.net>
+
+				   2/15
+				   ----
+copy_cmd.c
+	- copy_word_list: build the list in the right order, avoiding having
+	  to reverse it at the end. Helps with long argument lists
+
+shell.c
+	- bind_args: build the argument list in the right order, avoiding
+	  having to reverse it at the end.
+	- bind_args: only call push_args to save argc and argv as BASH_ARGC
+	  and BASH_ARGV if debugging mode is enabled (debugging_mode != 0).
+	  Inspired by report from Ambrose Feinstein <ambrose@google.com>
+	- bind_args: note that we've saved BASH_ARGC and BASH_ARGV by setting
+	  bash_argv_initialized
+	- shell_reinitialize: reset bash_argv_initialized back to 0 so
+	  BASH_ARGV and BASH_ARGC will be recreated if we're in debugging mode
+
+variables.c
+	- save_bash_argv: new function, initializes BASH_ARGV and BASH_ARGC
+	  from the saved positional parameters
+	- init_bash_argv: initialize BASH_ARGV and BASH_ARGC if
+	  bash_argv_initialized == 0
+
+builtins/shopt.def
+	- shopt_set_debug_mode: if we're turning on debug mode, initialize
+	  BASH_ARGC and BASH_ARGV if bash_argv_initialized == 0
+
+				   2/16
+				   ----
+execute_cmd.c
+	- execute_function: make sure BASH_ARGV and BASH_ARGC are initialized
+	  before calling push_args (and before calling remember_args)
+
+builtins/source.def
+	- source_builtin: make sure BASH_ARGV and BASH_ARGC are initialized
+	  before calling push_args (and before calling remember_args)
+
+builtins/evalfile.c
+	- _evalfile: if the shell compatibility level is 44 or lower, make
+	  sure BASH_ARGV and BASH_ARGC are initialized before calling
+	  array_push
+
+builtins/shopt.def
+	- compat44: new shell option. This will be the last compatXX option
+
+doc/{bash.1,bashref.texi}
+	- compat44: document new shell option
+
+				   2/21
+				   ----
+builtins/common.h
+	- ISOPTION: check s[1] before s[2] to avoid out of bound reads. Fixes
+	  bug reported by jeremy@feusi.co
+
+input.h
+	- B_SHAREDBUF: new flag for buffered input fds, indicates that this
+	  fd shares its b_buffer with another fd
+
+input.c
+	- duplicate_buffered_stream: when duplicating *from* the buffer
+	  corresponding to bash input, make sure the new buffer has B_SHAREDBUF
+	  in the flags, because copy_buffered_stream copies pointers
+	- duplicate_buffered_stream: if the buffer being copied to has the
+	  B_SHAREDBUF flag set, make sure the b_buffer doesn't get freed.
+	  Fixes use-after-free bug reported by jeremy@feusi.co
+	- save_bash_input,close_buffered_stream: make sure a buffer with
+	  B_SHAREDBUF set has its b_buffer set to NULL before calling
+	  free_buffered_stream
+
+				   2/24
+				   ----
+subst.c
+	- parameter_brace_expand_error: add parameter saying whether or not
+	  we are checking whether value is null, so we can have different
+	  error messages for ${x:?} and ${x?}. Report and fix from
+	  don fong <dfong@dfong.com>
+
+				    3/5
+				    ---
+lib/readline/bind.c
+	- _rl_read_file: instead of calling stat/open on the passed filename,
+	  use open/fstat to avoid one possible filename translation and close
+	  a small (benign) race condition. Report and fix from Roy Ivy
+	  <roy.ivy.iii@gmail.com>
+
+				   3/11
+				   ----
+variables.c
+	- makunbound: if new variable localvar_unset is non-zero, mark local
+	  vars in previous scopes as invisible and unset so they will show
+	  up as unset until that previous scope returns (similar to how	local
+	  variables in the current local scope are handled). localvar_unset
+	  is currently set to 0 with no way for a script to change its value.
+	  Eventually there will be an option to modify it.  From a bug-bash
+	  discussion started by Nikolai Kondrashov <spbnick@gmail.com> back
+	  on 2/11/2018
+
+				   3/13
+				   ----
+subst.c
+	- expand_word_list_internal: short-circuit and exit right away if a
+	  variable assignment preceding a special builtin fails in posix mode
+	- expand_word_list_internal: if a variable assignment precedes an
+	  empty command name (after expansion), fix to exit right away when
+	  the shell is in posix mode
+
+				   3/15
+				   ----
+doc/{bash.1,bashref.texi}
+	- Add text to Pathname Expansion clarifying that a slash must be
+	  matched by a slash in the pattern when matching pathnames, but
+	  not in other matching contexts. Suggested by <stormy1777@yahoo.com>
+
+builtins/common.c
+	- read_octal: allow octal numbers greater than 777 to accommodate
+	  modes and umasks that include sticky/setuid/setgid bits. Report
+	  and fix from Martijn Dekker <martijn@inlv.org>
+
+				   3/19
+				   ----
+lib/readline/bind.c
+	- rl_generic_bind: make sure we only assign to prevkey in the loop
+	  if the key sequence index is > 0, so ic is valid. Fixes bug
+	  reported by Koichi Murase <myoga.murase@gmail.com>
+
+builtins/read.def
+	- read_builtin: be slightly less aggressive checking for timeouts and
+	  SIGALRM: if we successfully read a character, don't check for a
+	  timeout until we store or process it. Fixes timing problem
+	  reported by Rob Foehl <rwf@loonybin.net>
+
+				   3/22
+				   ----
+sig.c
+	- termsig_handler: add a call to exit(1) after the kill, just in case
+	  there are circumstances where the SIG_DFL signal handler is
+	  ignored.  Report from Andrei Vagin <avagin@gmail.com>
+
+				   3/25
+				   ----
+lib/readline/bind.c
+	- _rl_function_of_keyseq_internal: new internal function that takes a
+	  length parameter to accommodate NUL in the key sequence. Patch from
+	  Koichi Murase <myoga.murase@gmail.com>
+	- rl_function_of_keyseq_len: new application-callable function that
+	  takes a length parameter; otherwise equivalent to rl_function_of_keyseq.
+
+lib/readline/readline.h
+	- rl_function_of_keyseq_len: add extern declaration for new function
+
+lib/readline/doc/rltech.texi
+	- rl_function_of_keyseq_len: document new function interface
+
+bashline.c
+	- bash_execute_unix_command: use rl_function_of_keyseq_len to handle
+	  key sequences with embedded NULs (\C-@). Fix from Koichi Murase
+	  <myoga.murase@gmail.com>
+
+lib/readline/bind.c
+	- rl_bind_key_if_unbound,rl_bind_key_if_unbound_in_map: run the KEY
+	  argument through rl_untranslate_keyseq to produce a symbolic sequence
+	  that can encode \C-@.
+	- rl_bind_keyseq_if_unbound_in_map: translate the key sequence in order
+	  to accommodate symbolic key sequences; should be a no-op for `raw'
+	  key sequences such as the arrow key seqeunces from terminfo. Change
+	  from Koichi Murase <myoga.murase@gmail.com>
+
+				    4/2
+				    ---
+jobs.c
+	- wait_for: when setting the SIGINT signal handler to wait_sigint_handler
+	  make sure we're not setting old_sigint_handler recursively, as we
+	  can when running an external command in a trap we took after a
+	  command exited due to SIGINT. We don't want to overwrite
+	  old_sigint_handler here. Fixes bug reported by Dr. Werner Fink
+	  <werner@suse.de>
+
+execute_cmd.c
+	- execute_disk_command: when there is a command_not_found_hook, make
+	  sure the subshell turns off job control before running it, in case
+	  it runs processes. We don't want it to manipulate process groups.
+	  Fixes bug reported by ÐиÑиллов Ðима <dk.1997-fast@yandex.ru>
+	- execute_command_internal: make sure the command run by the `command'
+	  builtin doesn't cause the ERR trap to be executed; wait for the
+	  status to be returned by the command builtin. Fixes bug reported by
+	  Martijn Dekker <martijn@inlv.org>
+
+				    4/4
+				    ---
+subst.c
+	- process_substitute: handle longjmp back to top_level and function
+	  returns (return_catch) in the child process, like command
+	  substitution, so we don't longjmp back to some arbitrary spot from
+	  the `exit' or `return' builtins, or on an expansion error, like
+	  the command timing code. Fixes bug reported by Basin Ilya
+	  <basinilya@gmail.com>
+
+				    4/6
+				    ---
+parse.y
+	- read_token_word: when reading a matched pair of backquotes as part
+	  of a word, treat it as quoted so the characters are read as a single
+	  word, but do not let the presence of the backquote mark the word as
+	  quoted. Fixes here-document delimiter bug reported by Denys Vlasenko
+	  <dvlasenk@redhat.com>
+
+				    4/7
+				    ---
+execute_cmd.c
+	- execute_case_command: call quote_string_for_globbing with the
+	  QGLOB_CTLESC flag for both quoted and unquoted words, so it will
+	  remove CTLESC/CTLESC in all cases while converting other quoted
+	  characters to use a preceding backslash. Bug reported by
+	  Martijn Dekker <martijn@inlv.org>
+
+				    4/9
+				    ---
+smatch.c
+	- posix_cclass_only: helper function that checks whether a pattern has
+	  only posix single-byte character classes ([:alpha:], etc.) or has
+	  none at all
+	- xstrmatch: if running in a multibyte locale, make sure to short-
+	  circuit to the single-byte matching code only if there are no
+	  unrecognized character class names, since the wide character ctype
+	  functions allow locales to define their own character class names
+	  (e.g., "hyphen"). Fixes issue reported by yangyajing <yyj_cqu@163.com>
+
+				   4/10
+				   ----
+configure.ac,cross-build/qnx.cache
+	- qnx: add a configure cache file for cross-building, treat qnx 7 like
+	  qnx 6 in terms of cpp options. Fix from Brian Carnes
+	  <bcarnes@google.com>
+
+aclocal.m4
+	- BASH_CHECK_DEV_STDIN: experimental change to test for /dev/stdin
+	  independently of /dev/fd or /proc/self/fd. Suggested for QNX by
+	  Brian Carnes <bcarnes@google.com>
+
+
+				   4/11
+				   ----
+lib/glob/glob.c
+	- glob_testdir: return -2 if DIR is a symlink, to differentiate it from
+	  any other kind of non-directory file
+	- glob_vector: if we have GX_ALLDIRS (globstar), we want to skip over
+	  symlinks to directories, since we will pick up the real directory
+	  later. Fixes incompatibility reported by Murukesh Mohanan
+	  <murukesh.mohanan@gmail.com>
+
+bashline.c
+	- bash_execute_unix_command: changes to make READLINE_POINT apply to
+	  characters instead of bytes when in a multibyte locale. Report and
+	  fix from Koichi Murase <myoga.murase@gmail.com>
+
+				   4/12
+				   ----
+builtins/evalstring.c
+	- parse_and_execute_cleanup: now takes an argument which is the value
+	  of running_trap at some point before parse_and_execute was called;
+	  changed callers in sig.c, builtins/evalfile.c
+
+builtins/common.h
+	- parse_and_execute_cleanup: changed prototype
+
+				   4/13
+				   ----
+builtins/evalstring.c
+	- parse_and_execute_cleanup: if the argument holding the previous state
+	  of running_trap is the same value as the current running_trap state,
+	  don't call run_trap_cleanup: assume that there is a caller who will
+	  take care of the cleanup after this returns. Fixes recursive trap
+	  call on "eval return" reported by Martijn Dekker <martijn@inlv.org>
+
+parse.y
+	- read_a_line: if remove_quoted_newline is non-zero, indicating the
+	  here-document delimiter is unquoted, we will be running the contents
+	  of the here-document through word expansion and need to quote CTLESC
+	  and CTLNUL in the input. Fixes bug with ^A in here document reported
+	  by Jorge Alberto Baca Garcia <bacagarcia@me.com>
+
+				   4/18
+				   ----
+pathexp.c
+	- quote_string_for_globbing: make sure the QGLOB_CTLESC code handles
+	  both CTLESC CTLESC and CTLESC CTLNUL in the same way. Fixes bug
+	  reported by Martijn Dekker <martijn@inlv.org>
+
+				   4/19
+				   ----
+execute_cmd.c
+	- execute_command_internal: before executing any command in the current
+	  shell, and before copying any existing FIFO list, call
+	  reap_procsubs to unlink or close any process substitution pipes
+	  associated with processes that have exited. Fixes hang in test suite
+	  when trying to open a FIFO with no process having it open for
+	  reading
+
+				   4/26
+				   ----
+parse.y
+	- read_token_word: if returning REDIR_WORD for a {id}>foo construct,
+	  for example, make sure to assign the_word to yylval.word before
+	  returning, in case a recursive call to the parser overwrites it
+	  (e.g., when evaluating array indexes). From a message to
+	  austin-group-l from Stephane Chazelas <stephane.chazelas@gmail.com>
+
+lib/glob/sm_loop.c
+	- BRACKMATCH: if we have an invalid character class in an otherwise
+	  well-formed bracket expression, don't try to match each character
+	  of the (invalid) class individually; just skip over the class and
+	  move on.  From a message on the austin-group list from
+	  Stephane Chazelas <stephane.chazelas@gmail.com>
+
+				   4/27
+				   ----
+variables.c
+	- push_exported_var,push_func_var,push_temp_var: make sure to set the
+	  context correctly in the variable we bind in the previous (non-temp)
+	  scope. Report from Martijn Dekker <martijn@inlv.org>
+
+pathexp.c
+	- unquoted_glob_pattern_p: a pattern that contains a backslash can
+	  have it removed by the matching engine (since backslash is special
+	  in pattern matching), so if the pattern contains a backslash, and
+	  does not end in a backslash, we need to return true. Fixes bug
+	  reported by Robert Elz <kre@bmunnari.OZ.AU>
+
+lib/glob/glob_loop.c
+	- INTERNAL_GLOB_PATTERN_P: same change to return TRUE for a backslash
+	  that doesn't end the pattern
+
+lib/sh/timeval.c
+	- print_timeval: use locale_decpoint() instead of fixed `.' to print
+	  decimal point. Bug report in austin-group email from Joerg Schilling
+	  <Joerg.Schilling@fokus.fraunhofer.de>
+
+lib/sh/clock.c
+	- print_clock_t: use locale_depoint() in the same way as print_timeval
+
+				   4/29
+				   ----
+subst.c
+	- expand_cond_node: if special != 0, make sure to add QGLOB_CTLESC
+	  to the flags passed to quote_string_for_globbing. Same issue as the
+	  one with `case' fixed on 4/7, report from Martijn Dekker
+	  <martijn@inlv.org>
+
+				   4/30
+				   ----
+redir.c
+	- do_redirection_internal: r_close_this: if the file descriptor is
+	  already closed before the shell is asked to close it, make sure to
+	  add an undo list redirect to make sure it stays closed. Report from
+	  Martijn Dekker <martijn@inlv.org>
+
+				    5/2
+				    ---
+variables.c
+	- push_posix_temp_var: new function, takes the SHELL_VAR * passed as
+	  an argument and uses the name and value to create a global variable
+	- merge_temporary_env: if posixly_correct is set, call
+	  push_posix_temp_var to create global variables, otherwise call
+	  push_temp_var to preserve the old behavior. Right now, it's only
+	  called when in posix mode, but that might change. This undoes the
+	  change from 4/27 when in posix mode
+
+				    5/3
+				    ---
+sig.c
+	- struct that holds the terminating signal information has a new
+	  field: whether that signal is expected to cause a core dump
+	- termsig_handler: if the call to kill(2) doesn't kill the process,
+	  we have a problem. If our pid is not 1, we just exit with status
+	  128+sig (fake the sig exit status). If the pid is 1, we assume
+	  we're in a Linux pid namespace and aren't allowed to send a signal
+	  to ourselves. If we need to generate a core dump, we try to get
+	  the kernel to SIGSEGV us by dereferencing location 0. If not, we
+	  just exit with 128+sig. From a report and patch from Andrei Vagin
+	  <avagin@virtuozzo.com>
+
+				    5/4
+				    ---
+bashline.c
+	- bash_execute_unix_command: make sure that parse_and_execute is called
+	  with newly-allocated memory to avoid prematurely freeing the
+	  command. Report and fix from Koichi Murase <myoga.murase@gmail.com>
+
+				    5/7
+				    ---
+builtins/shopt.def
+	- syslog_history: a shell option to control whether history is logged
+	  to syslog; can be modified at runtime. Original patch from
+	  Siteshwar Vashisht <svashisht@redhat.com>
+
+config-top.h
+	- SYSLOG_SHOPT: new configurable option, determines whether there is a
+	  shell option to control syslogging history lines at runtime and sets
+	  the default value of the option
+
+bashline.c
+	- syslog_history: new variable to control whether history lines are
+	  sent to syslog; default value is the value of SYSLOG_SHOPT (or 1
+	  if that's not defined)
+	- bash_add_history: send history lines to syslog if syslog_history is
+	  non-zero
+
+				   5/10
+				   ----
+
+variables.c
+	- push_var_context: if we are in Posix mode and manipulating the
+	  temporary environment (temporary_env), implement behavior specified
+	  in Posix interp 1009 and make sure that temporary assignments
+	  preceding function calls modify the current environment *before*
+	  the function is executed.
+
+[bash-5.0-alpha frozen]
+
+				   5/12
+				   ----
+execute_cmd.c
+	- execute_in_subshell: subshells should set loop_level == 0, since
+	  they are no longer "enclosed" by the loop, according to posix.
+	  Report from Aeron.E. Wang <aeron.e.wang@gmail.com>
+
+				   5/24
+				   ----
+Makefile.in
+	- pkgconfigdir: don't fail installing bash.pc if this directory doesn't
+	  exist or isn't writable -- there's no error in failing to install
+	  something nothing will use
+	- install-headers-dirs: creat $(pkgconfigdir) if it doesn't exist
+
+lib/sh/shmbchar.c
+	- utf8_mblen: replace with version from gnulib
+	- utf8_mbstrlen: reimplement using utf8_mblen so it handles invalid
+	  multibyte sequences in the same way as mbstrlen
+
+lib/readline/mbutil.c
+	- _rl_utf8_mblen: utf-8 specific version of mblen from gnulib
+
+include/shmbutil.h
+	- ADVANCE_CHAR,COPY_CHAR_P: do better job detecting end of string in
+	  UTF-8 locales (should not be called with an empty string, but to
+	  be safe)
+
+				   5/25
+				   ----
+lib/sh/utf8.c
+	- new file, utf-8-specific functions collected from other files
+
+externs.h
+	- extern declarations moved around for utf8.c
+
+include/shmbutil.h
+	- SADD_MBCHAR, SADD_MBQCHAR_BODY, ADVANCE_CHAR_P: if the locale is a
+	  UTF-8 locale, don't bother with a call to mbrlen if the current
+	  character cannot start a multibyte character
+
+variables.c
+	- push_var_context: only merge the temporary environment in posix mode
+	  if we are executing a shell function (flags & VC_FUNCENV). Report
+	  from Martijn Dekker <martijn@inlv.org>
+
+lib/readline/mbutil.c
+	- _rl_get_char_len: don't call mbrlen if we are in a UTF-8 locale and
+	  the character cannot start a multibyte sequence
+
+builtins/read.def
+	- read_builtin: if mb_cur_max > 1, call read_mbchar only if we're not
+	  in a utf-8 locale or, if we are, the character we just read indicates
+	  the start of a multibyte sequence
+
+subst.c
+	- string_extract_verbatim: don't call MBRLEN if we're in a utf-8
+	  locale and the current character can't start a multibyte sequence
+	- setifs: don't call MBRLEN if we're in a utf-8 locale and the first
+	  character of $IFS can't start a multibyte sequence
+
+lib/readline/kill.c
+	- rl_bracketed_paste_begin: make sure we return 0 here if rl_insert_text
+	  returns the right number of characters inserted to be consistent
+	  with other functions. Returns 1 otherwise. Report and fix from
+	  Gabe Krabbe <gabe@rtfs.de> back in March, 2018
+
+lib/readline/readline.c
+	- rl_subseq_result: make sure r is < 0 before checking map[ANYOTHERKEY]
+	  to see if we shadowed a key that should now be tried
+
+				   5/27
+				   ----
+variables.c
+	- assign_aliasvar: perform same validity check on subscript assignment
+	  as alias builtin performs on name argument. Bug report from
+	  Mike Jonkmans <bashbug@jonkmans.nl>
+
+				   5/29
+				   ----
+builtins/setattr.def
+	- set_var_attribute: we should not propagate a variable assignment
+	  preceding a builtin back to the calling environment unless the
+	  shell is in posix mode. Since previous versions of the shell do
+	  this, setting the shell compatibility level to 44 or less will
+	  continue the propagation behavior
+
+				    6/1
+				    ---
+lib/readline/histexpand.c
+	- history_tokenize_word: as part of teaching history tokenization more
+	  and more about shell syntax, allow command and process subsitution
+	  and extended globbing patterns to appear within a word being
+	  tokenized and not just at the beginning. Fixes bug reported back in
+	  2/2017 by ecki@tofex.de
+
+bashhist.c
+	- load_history: use HISTSIZE_DEFAULT (still defaults to "500") to set
+	  the initial value of $HISTSIZE. HISTSIZE_DEFAULT can be overridden
+	  in config-top.h
+
+				    6/4
+				    ---
+configure.ac
+	- make sure we link against an external readline library that's at
+	  least version 8
+
+				    6/8
+				    ---
+pcomplete.h
+	- INITIALWORD: internal compspec name for programmable completion on
+	  the initial (usually the command) word
+
+bashline.c
+	- attempt_shell_completion: if we are in a command position and the
+	  user has defined a compspec for INITIALWORD, use programmable
+	  completion to complete command words. Original patch from
+	  Luca Boccassi <bluca@debian.org>
+
+lib/readline/doc/rluser.texi,builtins/complete.def,doc/bash.1
+	- make it clearer that -D takes precedence over -E when supplied as
+	  options to `complete', not when they are applied during completion
+
+builtins/complete.def
+	- complete_builtin,compgen_builtin: add support for -I option
+	- print_one_completion,print_compopts: display -I when appropriate
+
+lib/readline/doc/rluser.texi,doc/bash.1
+	- complete,compgen: document new -I option and its effect
+
+				   6/10
+				   ----
+lib/readline/histfile.c
+	- read_history_range: don't apply the heuristic and try to append a
+	  history line to an existing history entry if we don't have any
+	  history entries. Bug and fix from Edward Huff <ejhuff@gmail.com>
+
+				   6/12
+				   ----
+bashline.c
+	- attempt_shell_completion: don't all the programmable completion for
+	  INITIALWORD if programmable completion is disabled
+	- attempt_shell_completion: make sure in_command_position remains set
+	  for an empty command word on an otherwise blank line, making the
+	  presence of assignment statements optional.  Report from
+	  Luca Boccassi <bluca@debian.org>
+
+				   6/20
+				   ----
+lib/malloc/malloc.c
+	- morecore,internal_malloc,internal_free: requests for more than
+	  128K bytes (defined as MMAP_THRESHOLD and saved in the new
+	  malloc_mmap_threshold variable) are now satisfied via mmap and
+	  freed via munmap. We only use mmap if we have mmap and MAP_ANON
+	  (or MAP_ANONYMOUS). These blocks are not available for splitting
+	  or coalescing, so every request for 128K bytes or smaller is
+	  satisfied via sbrk(). We don't use mremap for realloc yet, but
+	  we could in the future
+
+lib/malloc/mstats.h
+	- malloc_stats: the malloc stats now include the number of calls to
+	  mmap and the total number of bytes requested via mmap. The number
+	  of calls to munmap is captured in each bucket's lesscore count
+
+lib/malloc/stats.c
+	- print_malloc_stats: now prints an indication of where the change from
+	  sbrk to mmap takes place, and prints number of mmap calls and total
+	  number of bytes allocated using mmap
+
+				   6/22
+				   ----
+variables.c
+	- get_bashargcv: new dynamic "fetch" variable for BASH_ARGV and
+	  BASH_ARGC, for backwards compatibility: if a script makes a
+	  reference to either variable at the top level (not in a shell
+	  function) without enabling debugging mode and not having initialized
+	  the variable previously (using a simple semaphore), create the
+	  variables
+
+				   6/25
+				   ----
+configure.ac
+	- opt_bash_malloc: bash malloc no longer disabled for systems that
+	  require eight-bit alignment; the bash malloc has had this for a
+	  long time
+
+				    7/4
+				    ---
+bashline.c
+	- pre_process_line: if command-oriented history is enabled, and the
+	  line being expanded is the second or later in a multi-line command,
+	  and we know the command is being saved as the current history entry,
+	  decrease history_length before calling history_expand so references
+	  like !! refer to the previous history entry as usual
+
+lib/readline/histexpand.c
+	- history_quoting_state: new variable, can be set by calling
+	  application before calling history_expand to note that the string
+	  being expanded is part of a quoted string. Can be set to a single
+	  quote, a double quote, or 0 (no quoting)
+	- history_expand: look at history_quoting_state and honor the
+	  single-quote setting by not expanding any initial portion of the
+	  line before the closing single quote. This allows history expansions
+	  to be performed on a line containing a closing single quote if they
+	  appear after the single quote
+
+lib/readline/history.h
+	- history_quoting_state: extern declaration
+
+bashhist.c
+	- bash_history_inhibit_expansion: if history_quoting_state indicates
+	  that this string is single-quoted, skip over the single-quoted
+	  portion and determine whether or not the portion after the
+	  quoted string needs to be inhibited from history expansion
+
+parse.y
+	- shell_getc: set history_quoting_state based on the contents of the
+	  current delimiter before calling pre_process_line
+
+				    7/6
+				    ---
+lib/readline/doc/hsuser.texi
+	- describe the default behavior of backslash and single and double
+	  quotes
+
+lib/readline/doc/hstech.texi
+	- history_quoting_state: describe effect of setting this variable
+	- history_quotes_inihibit_expansion: expand the description to include
+	  the default quoting behavior that setting this variable enables
+
+				    7/9
+				    ---
+support/man2html.c
+	- unescape: use memmove instead of strcpy to handle overlapping strings
+	  Report and fix from Bernhard M. Wiedemann <bwiedemann@suse.de>
+
+lib/sh/getenv.c
+	- getenv: check that environ is non-NULL before looking through it.
+	  Report and fix from Keeley Hoek <keeley@hoek.io>
+
+				   7/12
+				   ----
+braces.c
+	- mkseq: use better integer overflow handling for systems with 32-bit
+	  ints and 64-bit intmax_ts. Bug reported by Simon Wörner
+	  <mail@simon-woerner.de> as the result of fuzzing
+
+builtins/declare.def
+	- declare_internal: make sure bind_variable returns non-NULL when
+	  setting attributes for a variable named as an argument to declare
+	  that also appears in the temporary environment (and is a nameref).
+	  Bug reported by Simon Wörner <mail@simon-woerner.de as the
+	  result of fuzzing
+
+variables.c
+	- bind_variable_internal: if we're assigning through a nameref, don't
+	  create a variable with an invalid name under any circumstances
+
+builtins/common.c
+	- get_job_spec: make sure to return NO_JOB if atoi() returns < 0 due
+	  to integer overflow.
+	  Bug reported by Simon Wörner <mail@simon-woerner.de as the
+	  result of fuzzing
+
+				   7/13
+				   ----
+execute_cmd.c
+	- execute_in_subshell: don't call set_sigint_handler if the subshell
+	  is asynchronous, since it undoes the signal handler installed by
+	  setup_async_signals. Fixes bug reported by Daniel Mills
+	  <danielmills1@gmail.com>
+
+parse.y,externs.h
+	- reset_readahead_token: new convenience function for the rest of
+	  the shell, resets token_to_read if it's a newline (as it will be
+	  after reset_parser is called)
+
+eval.c
+	- reader_loop: if we're just going to execute one command, make sure
+	  the read-ahead token isn't set to something that will result in a
+	  NULL command (by calling reset_readahead_token), since the code
+	  will take that as the one command and set EOF_Reached
+
+				   7/15
+				   ----
+doc/{bash.1,bashref.texi}
+	- indirect expansion: clarify that the expansion works on parameters,
+	  not just variables (NAMEs). Suggested by konsolebox
+	  <konsolebox@gmail.com>
+
+				   7/16
+				   ----
+doc/{bash.1,bashref.texi}
+	- INSIDE_EMACS: document its effect on line editing
+
+				   7/17
+				   ----
+lib/readline/{readline.c,rlprivate.h}
+	- _rl_eof_found: new variable, private to the readline library, that
+	  indicates whether the current call to readline() will return NULL
+	  because we read EOF
+
+lib/readline/rltty.c
+	- rl_deprep_terminal: if bracketed paste mode is active, the last
+	  character of the string to disable it is \r (to avoid confusing
+	  the terminal driver about where the cursor is). In this case,
+	  output a newline before returning so subsequent text (like the
+	  `exit' bash prints) doesn't overwrite the prompt. Bug from
+	  https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=903936
+
+variables.c
+	- make_local_assoc_variable: add second argument like corresponding
+	  local array function, to allow this function to return an existing
+	  local array variable to the caller for the caller to handle
+
+variables.h
+	- make_local_assoc_variable: change function prototype to add second
+	  arg
+
+{subst.c,variables.c}
+	- make_local_assoc_variable: change callers
+
+builtins/declare.def
+	- declare_internal: call make_local_assoc_variable with a non-zero
+	  second arg to have it return an existing local array variable to be
+	  flagged as an error. Fixes bug reported by Grisha Levit
+	  <grishalevit@gmail.com>
+	- declare_internal: call make_local_array_variable with unconditional
+	  second argument of 1 for the same reason as above
+
+				   7/18
+				   ----
+variables.c
+	- bind_invalid_envvar: new function, takes invalid names from the
+	  initial environment (names that are not valid shell identifiers) and
+	  stores them in a separate hash table (invalid_env)
+	- maybe_make_export_env: make sure to add names from invalid_env to
+	  the export env
+	- assign_in_env: for now, prevent variable names that aren't shell
+	  identifiers from being added to the temporary environment. Addresses
+	  issue raised by Grisha Levit <grishalevit@gmail.com>
+
+test.c
+	- unary_test: rearrange code slightly to avoid a wasted variable lookup
+	  if the argument to -v is a subscripted array reference
+
+				   7/19
+				   ----
+variables.c
+	- nameref_transform_name: if a name doesn't resolve to a shell variable,
+	  this function will check whether it resolves to a nameref that
+	  points to a variable that hasn't been created yet
+
+variables.h
+	- nameref_transform_name: extern declaration
+
+subst.c
+	- do_compound_assignment: make sure that we follow any nameref chain
+	  if the name passed resolves to a nameref that points to a variable
+	  that doesn't exist. Fixes issue raised by Grisha Levit
+	  <grishalevit@gmail.com>
+
+builtins/declare.def
+	- declare_internal: before calling any variant of make_local_variable,
+	  make sure to perform any transformation of the name indicated by an
+	  existing nameref. Fixes issue raised by Grisha Levit
+	  <grishalevit@gmail.com>
+
+				   7/20
+				   ----
+builtins/declare.def
+	- declare_internal: if we are creating a global variable with -g, even
+	  if we're not giving it a value, check for namerefs at the global
+	  scope to avoid confusion with namerefs at the local (function) scope.
+
+subst.c
+	- expand_word_internal: if a double-quoted string expands to nothing,
+	  make sure we note that for later by setting had_quoted_null, just
+	  as we do for single-quoted empty strings
+
+subst.[ch]
+	- W_SAWQUOTEDNULL: new flag (replaces W_HASCTLESC, which is unused),
+	  means that we saw a possibly-discarded quoted null while expanding
+	  this word
+
+subst.c
+	- expand_word_internal: if expansion results in a non-empty word but
+	  we saw a quoted null during expansion (had_quoted_null == 1), set
+	  W_SAWQUOTED_NULL in the returned word
+	- expand_word_internal: if a recursive call to param_expand comes back
+	  with W_SAWQUOTEDNULL set in the resulting word, set had_quoted_null
+	  to note it
+	- parameter_brace_expand_rhs: if a recursive call to expand_word_internal
+	  returns a non-quoted-null string (after an optional call to
+	  string_list) make sure we pass the W_SAWQUOTEDNULL flag back to the
+	  caller
+	- word_list_split: if a word expands to nothing after expansion and
+	  splitting, but we saw a quoted null during the expansion
+	  (W_SAWQUOTEDNULL), return an empty word
+
+				   7/25
+				   ----
+
+subst.c
+	- do_compound_assignment: if creating a local variable, make sure to
+	  set `newname' to the name of the variable returned from find_variable,
+	  since that follows namerefs. Fixes issue raised by Grisha Levit
+	  <grishalevit@gmail.com>
+
+				   7/29
+				   ----
+subst.c
+	- get_var_and_type: if VALUE is NULL, check before calling dequote_string.
+	  Report and fix from Grisha Levit <grishalevit@gmail.com>
+
+				   7/30
+				   ----
+variables.c
+	- make_local_{array,assoc}_variable: make sure we're not trying to
+	  inherit a value from an incompatible array type. Fixes issue raised
+	  by Grisha Levit <grishalevit@gmail.com>
+	- nameref_transform_name: if we're trying to resolve a nameref that
+	  will be used to create a local variable, make sure the nameref is
+	  at the same variable scope. Report from Grisha Levit
+	  <grishalevit@gmail.com>
+
+				    8/2
+				    ---
+array.c
+	- array_subrange: change to use string_list_pos_params after creating a
+	  WORD_LIST from the array slice, like assoc_subrange does
+
+subst.c
+	- parameter_brace_substring: since assoc_subrange and array_subrange
+	  both call string_list_pos_params now, treat the results the same as
+	  the VT_POSPARAMS case (pos_params also calls string_list_pos_params).
+	  Fixes behavior difference between ${a[@]:sub} and ${@:sub} reported
+	  by Ilkka Virta <itvirta@iki.fi>
+
+				    8/3
+				    ---
+array.c
+	- array_patsub: rewrite to work in terms of a WORD_LIST * and call
+	  string_list_pos_params on the result to be consistent with the
+	  expansions of ${@/pat/rep} and ${*/pat/rep}
+
+assoc.c
+	- assoc_patsub: rewrite to work in terms of a WORD_LIST * and call
+	  string_list_pos_params on the result to be consistent with the
+	  expansions of ${@/pat/rep} and ${*/pat/rep}
+
+subst.c
+	- parameter_brace_patsub: change how return value of {array,assoc}_patsub
+	  is treated to make it identical to pos_params_pat_subst, since they
+	  all call string_list_pos_params now
+	- expand_string_for_pat: make sure we preserve the value of
+	  expand_no_split_dollar_star instead of just unconditionally setting
+	  it back to 0 in case it was 1 before this function was called
+
+				    8/6
+				    ---
+array.c
+	- array_modcase: rewrite to work in terms of a WORD_LIST * and call
+	  string_list_pos_params on the result to be consistent with the
+	  expansions of ${@,,} and ${*,,}
+
+assoc.c
+	- assoc_modcase: rewrite to work in terms of a WORD_LIST * and call
+	  string_list_pos_params on the result to be consistent with the
+	  expansions of ${@,,} and ${*,,}
+
+subst.c
+	- parameter_brace_casemod: change how return value of {array,assoc}_modcase
+	  is treated to make it identical to pos_params_modcase, since they
+	  all call string_list_pos_params now
+
+				    8/8
+				    ---
+builtins/declare.def
+	- declare_internal: if we are making local variables, and not dealing
+	  with the nameref attribute, make sure that any nameref variable we
+	  followed when resolving the name given was at the same variable
+	  context. If not, we just want to make or use a local variable with
+	  the name passed; if so, we want to use the nameref value as the
+	  variable name. Report from Grisha Levit <grishalevit@gmail.com>
+
+				    8/9
+				    ---
+configure.ac
+	- globasciiranges: RRI now on by default, must be turned off explicitly
+	  at configure time or runtime with `shopt -u globasciiranges'
+
+				   8/14
+				   ----
+variables.c
+	- dispose_saved_dollar_vars: decrement stack pointer before looking
+	  for saved positional parameters to dispose; stack pointer always
+	  points to the first unused slot
+
+				   8/15
+				   ----
+variables.c
+	- dollar_arg_stack: now a stack of struct saved_dollar_vars, which has
+	  an array for the first ten (dollar_vars) and a WORD_LIST * for the
+	  remaining (rest_of_args). Fixes performance issue with function calls
+	  and large numbers of positional parameters raised by
+	  Bize Ma <binaryzebra@gmail.com>
+	- {save,restore,free,free_saved}_dollar_vars: new functions to manage
+	  dollar_vars and dollar_arg_stack members. Need to keep these in sync
+	  with whatever remember_args does
+	- push_dollar_vars: use save_dollar_vars, which just copies pointers,
+	  and directly assign rest_of_args, without copying the words, to the
+	  dollar_arg_stack entry. Have to clear dollar_vars and rest_of_args
+	  with the assumption that callers will call remember_args(args, 1)
+	  immediately following
+	- pop_dollar_vars: free current positional parameters and restore old
+	  ones from pointers saved in dollar_arg_stack, making sure to
+	  invalidate any cached value for "$@"
+	- dispose_saved_dollar_vars: free saved pointers from current index
+	  into dollar_arg_stack
+
+doc/{bash.1,bashref.texi}
+	- POSIXLY_CORRECT: make sure to note that bash makes sure this variable
+	  is set when posix mode is enabled
+
+				   8/17
+				   ----
+{jobs,nojobs}.c
+	- set_jobs_list_frozen: set jobs_list_frozen to a particular value.
+	  Intended to save and restore the value around code sections instead
+	  of unconditionally unfreezing it.
+
+jobs.h
+	- set_jobs_list_frozen: extern declaration
+
+execute_cmd.c
+	- execute_pipeline: if lastpipe is enabled, save and restore the
+	  value of jobs_list_frozen using freeze_jobs_list/set_jobs_list_frozen
+	  to avoid problems with race conditions and nested pipelines
+	  causing jobs to be removed from the jobs table. Fixes savannah issue
+	  https://savannah.gnu.org/support/index.php?109541 reported by
+	  Björn Kautler <vampire0>
+
+				   8/24
+				   ----
+execute_cmd.c
+	- lastpipe_cleanup: call set_jobs_list_frozen instead of
+	  unfreeze_jobs_list
+	- execute_pipeline: set up lastpipe_cleanup with old value of
+	  jobs_list_frozen
+
+				    9/3
+				    ---
+builtins/printf.def
+	- getuintmax,getfloatmax: on a conversion error, return as much of the
+	  value as we were able to convert instead of 0. Fixes bug reported
+	  by Robert Elz <kre@bmunnari.OZ.AU>
+
+				    9/4
+				    ---
+lib/readline/text.c,lib/readline/rlprivate.h
+	- _rl_backward_char_internal: new function, guts of rl_backward_char
+	  and rl_backward_byte, not currently used there
+
+lib/readline/vi_mode.c
+	- _rl_vi_advance_point: new function, move point forward by one
+	  character, handling multibyte locales and characters and the end
+	  of line semantics
+	- _rl_vi_backup_point: new function, move point backward by one
+	  character, handling multibyte locales and characters
+	- rl_vi_eword,rl_vi_eWord: use rl_vi_advance_point instead of a simple
+	  increment to handle multibyte characters.  Fixes bug reported by
+	  Enrico Maria De Angelis <enricomaria.dean6elis@gmail.com>
+
+				    9/5
+				    ---
+lib/readline/vi_mode.c
+	- rl_vi_fword,rl_vi_fWord: use rl_vi_advance_point instead of a simple
+	  increment to handle multibyte characters
+	- rl_vi_bword,rl_vi_bWord: use rl_vi_backup_point instead of a simple
+	  decrement (and _rl_vi_advance_point where necessary) to handle
+	  multibyte characters
+	- rl_vi_complete,_rl_vi_change_mbchar_case,_rl_vi_domove_motion_cleanup:
+	  use _rl_vi_advance_point instead of simple rl_point increment
+	- vi_delete_dispatch,vi_change_dispatch,vi_yank_dispatch: use
+	  INCREMENT_POS instead of a simple increment to rl_mark to handle
+	  multibyte characters
+	- rl_vi_column: use _rl_forward_char_internal, starting with
+	  rl_point == 0, to handle multibyte characters (Posix says `character
+	  position', not index)
+
+				    9/7
+				    ---
+configure.ac
+	- changed release status to `beta'
+
+				    9/9
+				    ---
+lib/readline/display.c
+	- _rl_update_final: if the bottom line has zero characters and we are
+	  on that line at column 0, don't bother with an additional \r\n.
+	  Fixes redisplay nit reported by Per Bothner <per@bothner.com>
+
+
+configure.ac
+	- openbsd needs DEV_FD_STAT_BROKEN defined
+
+[bash-5.0-beta frozen]
+
+				   9/11
+				   ----
+builtins/exec.def
+	- exec_builtin: make sure to sync the buffered stream where bash is
+	  reading input (especially if it's fd 0) so a command exec'd by the
+	  script can read the rest of stdin after the exec
+
+				   9/15
+				   ----
+lib/readline/histexpand.c
+	- history_tokenize_internal: if the event contains embedded newlines
+	  (e.g., bash with command-oriented history and lithist), use them as
+	  word delimiters, equivalent to space and tab, so they don't end up
+	  as separate words. Fixes issue pointed out by Viktor Dukhovni
+	  <ietf-dane@dukhovni.org>
+	- history_tokenize_word: don't break if we get a newline (though we
+	  shouldn't get one due to the loop in history_tokenize_internal
+	- history_expand_internal: use newline as a whitespace character when
+	  expanding by words, as we do with history_tokenize_internal
+
+jobs.h
+	- J_PIPEFAIL: new flag for `flags' element of job struct
+
+jobs.c
+	- stop_pipeline: if pipefail_opt set, newjob gets J_PIPEFAIL in its
+	  flags word
+	- raw_job_exit_status: use J_PIPEFAIL (setting of pipefail when job
+	  created) instead of current setting of pipefail status to determine
+	  how to compute exit status of pipeline. Tentative implementation of
+	  Posix proposal
+
+expr.c
+	- exp0: don't call expr_bind_variable with a NULL string.  Fixes
+	  fuzzing bug reported by Eduardo Bustamante <dualbus@gmail.com>
+	- expr_bind_variable: don't try to do anything with a NULL or empty
+	  LHS
+
+				   9/16
+				   ----
+lib/readline/undo.c
+	- rl_do_undo: before we release the undo list entry we've just
+	  processed, make sure we avoid any pointer aliasing issues caused
+	  by having the entry being removed as part of the undo list in
+	  _rl_saved_line_for_history. Fixes fuzzing bug reported by
+	  Eduardo Bustamante <dualbus@gmail.com>
+
+				   9/17
+				   ----
+[bash-5.0-beta released]
+
+				   9/18
+				   ----
+lib/readline/bind.c
+	- name_and_keymap: new struct for keymap names and maps
+	- builtin_keymap_names: static array of builtin keymap names and
+	  maps; preparing for allowing applications to set the names of
+	  keymaps they create; keymap_names is initially a pointer to
+	  this array
+	- _rl_get_keymap_by_name,_rl_get_keymap_by_map: new functions for
+	  searching the keymap_names array and returning an index
+	- rl_get_keymap_by_name, rl_get_keymap_name: rewritten in terms of
+	  new functions above
+	- rl_set_keymap_name (char *name, Keymap map): new function, set
+	  name of MAP to NAME. NAME must not be builtin; MAP must not be one
+	  of the builtin keymaps. Request and initial implementation from
+	  Tom Tromey <tom@tromey.com>
+
+lib/readline/readline.h
+	- rl_set_keymap_name: new extern declaration for new public function
+
+lib/readline/doc/rltech.texi
+	- rl_set_keymap_name: add documentation
+
+lib/readline/doc/rluser.texi
+	- add text to `set keymap' description to note that applications
+	  can add keymap names that can be used there
+
+				   9/20
+				   ----
+parse.y
+	- shell_getc: don't execute the alias hack (returning a space at the
+	  end of the string) if we are parsing a command substitution that
+	  starts with a double paren (subshell inside a comsub), in which
+	  case the flags are PSH_DPAREN. Fixes fuzzing bug reported by
+	  Eduardo Bustamante <dualbus@gmail.com>
+
+lib/readline/isearch.c
+	- _rl_isearch_dispatch: default case: make sure we check multibyte
+	  char length when deciding whether to enlarge the search string
+	  buffer, instead of using the old assumption. Fixes fuzzing bug
+	  reported by Eduardo Bustamante <dualbus@gmail.com>
+
+builtins/fc.def,execute_cmd.c
+	- fixed some missing free()s uncovered by coverity. Report from
+	  Siteshwar Vashisht <svashisht@redhat.com>
+
+lib/glob/glob.c
+	- glob_vector: make sure name_vector is initialized to NULL
+
+lib/sh/{pathcanon,pathphys}.c
+	- {pathcanon,pathphys}: use memmove instead of strcpy on a possibly-
+	  overlapping region of memory
+
+subst.c
+	- parameter_list_transform: make sure to dispose the word list in all
+	  cases before returning
+	- parameter_brace_expand_rhs: make sure t1 is freed before returning
+	  due to an invalid name resulting from an indirect expansion
+
+support/man2html.c
+	- fixed a couple of memory leaks
+
+				   9/21
+				   ----
+subst.c
+	- process_substitute: if we are part of a job control process chain
+	  (pipeline_pgrp != shell_pgrp), have the child shell forked to run
+	  the process substitution set pipeline_pgrp to its own PID,
+	  effectively becoming a process group leader without changing
+	  its own process group. Fixes stray SIGHUP issue reported by
+	  Jeremy Townshend <jeremy.townshend@gmail.com>
+ 
+				   9/23
+				   ----
+arrayfunc.c
+	- assign_array_element: if we are assigning to an existing associative
+	  array, and assoc_expand_once is set, allow `*' and `@' as subscripts.
+	  Partial fix for report from Grisha Levit <grishalevit@gmail.com>
+
+variables.c
+	- bind_int_variable: if valid_array_reference (lhs) is not true,
+	  make sure that the lhs is a valid identifier before assigning the
+	  value
+
+arrayfunc.c
+	- valid_array_reference: allow blank subscripts. They are treated as
+ 	  `normal' keys for associative arrays and evaluate to 0 for indexed
+	  arrays. More of fix for report from Grisha Levit
+	  <grishalevit@gmail.com>
+
+				   9/24
+				   ----
+bashline.c
+	- restore_tilde: if the expanded length (xl) is longer than vl
+	  we end up requesting a negative amount of memory (an extremely
+	  large unsigned number). Just punt and return val in this case.
+	  Fuzzing bug reported by Eduardo Bustamante <dualbus@gmail.com>
+	- restore_tilde: make sure we return what the user typed if tilde
+	  expansion fails
+
+				   9/29
+				   ----
+builtins/shopt.def
+	- uncomment `localvar_unset' option definition
+
+doc/{bash.1,bashref.texi}
+	- document `localvar_unset' shell option
+
+arrayfunc.c
+	- valid_array_reference: if we are parsing a subscript for an existing
+	  associative array, the `assoc_expand_once' option is set, and the
+	  VA_ONEWORD flag is set in FLAGS (meaning there should be nothing
+	  following the closing `]'), don't call skipsubscript to find the
+	  closing `]', use one that is at the end of the word. Part of fix for
+	  issue reported by Grisha Levit <grishalevit@gmail.com>
+
+builtins/{printf,set}.def
+	- pass VA_ONEWORD as part of flags value everywhere valid_array_reference
+	  is used
+
+config-top.h
+	- CHECKWINSIZE_DEFAULT: now 1, so check_window_size is on by default
+	- HISTEXPAND_DEFAULT: new define, allows builder to enable or disable
+	  history expansion by default at build time
+
+doc/{bash.1,bashref.texi}
+	- checkwinsize: document new default value
+
+bashhist.h
+	- HISTEXPAND_DEFAULT: don't define if it's already defined. Strict
+	  POSIX mode continues to default to off
+
+				   9/30
+				   ----
+lib/readline/input.c
+	- win32_isatty: win32-specific changes from GDB. Patch submitted by
+	  Tom Tromey <tom@tromey.com>, originally from Eli Zaretskii
+	  <eliz@gnu.org>
+
+				   10/1
+				   ----
+lib/readline/vi_mode.c
+	- rl_vi_start_inserting: start an undo group so we can grab the text
+	  inserted here as a single unit, avoiding any insert coalescing
+	  performed by rl_insert_text. Report and fix from Richard Todd
+	  <richard.w.todd@outlook.com>
+
+				   10/3
+				   ----
+subst.c
+	- parameter_brace_transform: if we're asked to display the attributes
+	  of an unset variable, check that the variable exists even if
+	  get_var_and_type returns NULL (it checks invisible_p). Requested by
+	  Michal Pesa <pesathem@gmail.com>
+
+lib/readline/kill.c
+	- _rl_bracketed_text: new function, collects the text pasted in
+	  bracketed paste mode and consumes the bracketed paste end marker;
+	  returns the pasted text and its length
+	- rl_bracketed_paste_begin: call _rl_bracketed_text to collect the
+	  text
+
+lib/readline/isearch.c
+	- _rl_isearch_dispatch: set cxt->lastc to -7 if the input resolves to
+	  rl_bracketed_paste_begin
+	- _rl_isearch_dispatch: if cxt->lastc == -7, call _rl_bracketed_text
+	  to collect the pasted text and add it to the accumulating search
+	  string. Only works if ESC is not one of the isearch terminators.
+	  Fixes issue reported in Debian bug report 891780,
+	  https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=891780
+
+				   10/5
+				   ----
+variables.c
+	- push_posix_tempvar_internal: new function, body of push_func_var
+	  with additional argument saying whether it's being called from a
+	  function or (special) builtin code path
+	- push_builtin_var: new function, calls push_posix_tempvar_internal
+	  with second argument indicating builtin code path
+	- push_func_var: now a stub that calls push_posix_tempvar_internal
+	  with second argument indicating function code path
+	- pop_scope: if called from a special builtin, call push_builtin_var
+	  instead of push_func_var to do the right variable propagation
+
+builtins/shopt.def
+	- progcomp_alias: uncomment, make available to users
+
+doc/{bash.1,bashref.texi},lib/readline/doc/rluser.texi
+	- progcomp_alias: document shopt option, describe its use in
+	  the section on programmable completion
+
+trap.c
+	- decode_signal: handle SIGRTMIN+n at runtime, with the `SIG' prefix
+	  or without, case-insensitively if requested, and return SIGRTMIN+n.
+	  These values could be different than what was available at compile
+	  time. Report and patch from Rasmus Villemoes <rv@rasumsvillemoes.dk>
+
+				   10/8
+				   ----
+execute_cmd.c
+	- execute_command_internal: only set line_number from command->value.Subshell
+	  if the type == cm_subshell; otherwise defer and set later
+
+				   10/10
+				   -----
+examples/loadables/seq.c
+	- seq: new loadable builtin, derived originally from coreutils:seq.c
+	  but with very little of that code remaining
+
+				   10/12
+				   -----
+trap.c
+	- run_pending_traps,_run_trap_internal: honor evalnest_max and
+	  increment/decrement evalnest accordingly, since trap actions
+	  are processed as if run by `eval'. Feature suggsted by Mike
+	  Gerwitz <mtg@gnu.org>
+
+				   10/16
+				   -----
+expr.c
+	- expr_skipsubscript: new function, calls skipsubscript with flags
+	  similar to arrayfunc.c:valid_array_subscript if assoc_expand_once
+	  is set and it looks like we've already expanded the subscript of
+	  an associative array. Reported back on 8/27 by Grisha Levit
+	  <grishalevit@gmail.com>
+	- readtok: call expr_skipsubscript instead of skipsubscript
+
+arrayfunc.c
+	- valid_array_reference: call skipsubscript with a third arg computed
+	  from the VA_NOEXPAND flag only if we're expanding an associative
+	  array subscript -- we already figure out whether or not we are
+
+[bumped release status to beta2]
+
+				   10/20
+				   -----
+builtins/setattr.def
+	- set_or_show_attributes: after isolating NAME, make sure to restore
+	  the "[+]=" in case we need the word later. Issue pointed out by
+	  Grisha Levit <grishalevit@gmail.com>
+
+				   10/21
+				   -----
+lib/readline/search.c
+	- noninc_search_from_pos: if we are supposed to be searching for a
+	  pattern (vi mode), make sure to pass S to _hs_history_patsearch,
+	  since that has any leading `^' stripped
+
+lib/readline/histsearch.c
+	- _hs_history_patsearch: if the search isn't anchored, put a `*' at
+	  the beginning to force fnmatch to match anywhere in the line (could
+	  look at this later to make a change to history_search_internal that
+	  would avoid the need to add the leading `*')
+
+subst.c
+	- parameter_brace_expand_rhs: treat a failure to assign a variable with
+	  a ${param:=value} expansion as an expansion error, and, in a non-
+	  interactive posix-mode shell, exit the shell
+	- param_expand: don't set W_SPLITSPACE for $* unless IFS is NULL;
+	  consistent with other uses of W_SPLITSPACE
+
+				   10/22
+				   -----
+doc/{bash.1,bashref.texi}
+	- tweak description of bash conditional expressions to note that the
+	  test and [ commands determine their behavior based on the number of
+	  arguments. Suggested by Ilkka Virta <itvirta@iki.fi>
+
+				   10/24
+				   -----
+execute_cmd.c
+	- execute_simple_command: don't set $_ to NULL when executing a
+	  command that forks; just leave it unchanged. Tweaked the documentation
+	  slightly as a result. Inspired by report from Ricky Tigg
+	  <ricky.tigg@gmail.com>
+
+				   10/28
+				   -----
+redir.c
+	- here_document_to_fd: make sure the temp files used to store here
+	  documents are readable (and writable, where necessary) by the user.
+	  This can happen in the unlikely case that someone decides to shoot
+	  himself in the foot by setting the umask to 400. Issue originally
+	  raised back in March by Stephane Chazelas
+	  <stephane.chazelas@gmail.com>; fix inspired by Martijn Dekker
+	  <martijn@inlv.org>
+
+				   10/29
+				   -----
+lib/readline/terminal.c
+	- bind_termcap_arrow_keys: bind the "kI" capability (what the Insert
+	  keypad key outputs) to overwrite mode. Patch from Xose Vazquez Perez
+	  <xose.vazquez@gmail.com>
+
+				   10/30
+				   -----
+braces.c
+	- mkseq: make sure to terminate result array before passing it to
+	  strvec_dispose on an interrupt. Report and fix from Corbin Souffrant
+	  <corbin.souffrant@gmail.com>
+
+				   11/6
+				   ----
+trap.c
+	- _run_trap_internal: if the signal shows up as SIG_CHANGED after
+	  running the trap handler, check for terminating signals and run any
+	  terminating signal handler indicates. Fixes issue reported by
+	  Owen Stephens <owen@owenstephens.co.uk>
+
+				   11/7
+				   ----
+execute_cmd.c
+	- execute_builtin: don't merge the temporary environment when the
+	  `return' builtin is being executed if it's being executed by the
+	  `command' builtin, since that's supposed to inhibit the special
+	  builtin properties. Part of POSIX conformance problems reported
+	  by Martin Rehak <martin.rehak@oracle.com>
+
+builtins/cd.def
+	- bindpwd: if canonicalization fails when -P is specified (e.g. if the
+	  directory name length exceeds PATH_MAX), reset dirname ($PWD value) =
+	  to the_current_working_directory (Posix cd description, step 10.)
+	  Part of POSIX conformance problems reported by Martin Rehak
+	  <martin.rehak@oracle.com>
+
+builtins/kill.def
+	- kill_builtin: support -sSIG and -nSIG without requiring them to be
+	  separate arguments. POSIX says a "conforming implementation" should
+	  accept them.
+	  Part of POSIX conformance problems reported by Martin Rehak
+	  <martin.rehak@oracle.com>
+
+				   11/8
+				   ----
+arrayfunc.c
+	- array_value_internal: return NULL for invisible array variables.
+	  Fixes issue with FUNCNAME sometimes returning invalid value reported
+	  by Great Big Dot <greatbigdot@gmail.com>
+
+builtins/cd.def
+	- change_to_directory: if we are in posix mode, and the chdir to the
+	  absolute pathname ($PWD/dirname) fails, return an error without
+	  trying to use just `dirname' (posix cd step 10).
+	  Part of POSIX conformance problems reported by Martin Rehak
+	  <martin.rehak@oracle.com>
+
+execute_cmd.c
+	- execute_case_command: use expand_word_leave_quoted to expand the
+	  word, then dequote the resulting string. This performs the
+	  expansions in the order posix specifies.
+	  Part of POSIX conformance problems reported by Martin Rehak
+	  <martin.rehak@oracle.com>
+
+subst.c
+	- expand_word_unsplit: rewrite in terms of expand_word_leave_quoted
+	- ifs_whitespace: new macro, Posix ifs whitespace (ISSPACE; member
+	  of current locale's space char class)
+	- ifs_whitesep: new macro, whitespace that is a member of $IFS; used
+	  by list_string and get_word_from_string
+	- list_string: use ifs_whitesep instead of spctabnl in case $IFS
+	  contains whitespace characters that are not space, tab, or newline
+	- get_word_from_string: use ifs_whitesep instead of spctabnl in case
+	  $IFS contains whitespace characters that are not space, tab, or
+	  newline.
+	  Part of POSIX conformance problems reported by Martin Rehak
+	  <martin.rehak@oracle.com>
+
+				   11/9
+				   ----
+general.c
+	- posix_initialize: enable the shift_verbose option when turning on
+	  posix mode, and disable it when posix mode is disabled. From a
+	  report by Eric Blake <eblake@redhat.com>
+
+doc/bashref.texi
+	- posix mode: note the effect of posix mode on shift_verbose
+
+				   11/12
+				   -----
+subst.c
+	- parameter_brace_expand: if parameter_brace_expand_word returns an
+	  error, make sure to set TEMP = 0 (to note that the variable is unset).
+	  From a report by Grisha Levit <grishalevit@gmail.com>
+	- param_expand: if expanding $! when set -u is enabled, honor the
+	  PF_IGNUNBOUND flag and just return NULL, relying on the caller to
+	  take care of understanding that the variable is unset
+	  From a report by Grisha Levit <grishalevit@gmail.com>	
+	- parameter_brace_expand: if we are checking nullness, and we have a
+	  valid array expansion, a quoted null string resulting from the array
+	  expansion of a * or @ subscript satisfies the nullness check.
+	  From a report by Grisha Levit <grishalevit@gmail.com>
+
+				   11/14
+				   -----
+aclocal.m4
+	- BASH_CHECK_LIB_TERMCAP: add last-ditch check for libncursesw, since
+	  it's apparently the only curses library on some distributions.
+	  Report from John Frankish <john.frankish@outlook.com>
+
+				   11/16
+				   -----
+bashline.c
+	- attempt_shell_completion: allow an initial word completion to
+	  complete a partial first word (point appears in the middle of
+	  the word) before resorting to command completion. Report and fix
+	  from Luca Boccassi <bluca@debian.org>
+
+[bash-5.0-beta2 frozen]
+
+				   11/27
+				   -----
+bashline.c
+	- attempt_shell_completion: better fix for problems with fix from
+	  11/16. Report and fix from Tom Ryder <tom@sanctum.geek.nz>
+
+expr.c
+	- expr_skipsubscript: fix return type. Report and fix from
+	  Andreas Schwab <schwab@linux-m68k.org>
+
+				   11/29
+				   -----
+subst.c
+	- quote_escapes_internal: refactored quote_escapes into a function
+	  that takes an additional flag saying whether or not we are going
+	  to split the result. If we are not, and CTLESC is in IFS, we quote
+	  the CTLESC (ditto for CTLNUL) to prevent it being removed when the
+	  string is dequoted.
+	- quote_escapes: call quote_escapes_internal with FLAGS == 0
+	- quote_rhs: new function, calls quote_escapes with FLAGS == PF_NOSPLIT2
+	  so that a CTLESC will be quoted if CTLESC is in $IFS
+	- parameter_brace_expand_word: call quote_rhs on the value of a variable
+	  if PFLAGS includes PF_ASSIGNRHS, indicating that we will not be
+	  splitting the word, but we will be dequoting it. Fixes bug reported
+	  by Martijn Dekker <martijn@inlv.org>
+	- param_expand: same change as for parameter_brace_expand_word
+
+execute_cmd.c
+	- execute_in_subshell: if we are running a trap (running_trap > 0),
+	  turn off the SIG_INPROGRESS and SIG_CHANGED flags for that signal
+	  by calling run_trap_cleanup and reset running_trap to 0 (watch the
+	  second part!). Tagged for bash-5.1.
+
+				   11/30
+				   -----
+lib/readline/doc/rltech.texi
+	- rl_set_keymap_name: correct typo in the name; some updates to the
+	  description that clarify usage. Report from <hirooih@gmail.com>
+
+				   12/4
+				   ----
+aclocal.m4
+	- BASH_FUNC_FNMATCH_EQUIV_FALLBACK: a test of whether fnmatch(3)
+	  understands bracket equivalence classes ([=c=]) for characters
+	  that collate with equal weights but are not identical
+
+configure.ac,config.h.in
+	- call BASH_FUNC_FNMATCH_EQUIV_FALLBACK and define
+	  FNMATCH_EQUIV_FALLBACK to 1 if it can be used for equivalence
+	  classes
+
+				   12/5
+				   ----
+execute_cmd.c
+	- eval_arith_for_expr,execute_arith_command,execute_cond_command: make
+	  sure running_trap == 0 before we reset the_printed_command_except_trap
+	  Report from Peng Yu <pengyu.ut@gmail.com>
+
+lib/glob/smatch.c
+	- _fnmatch_fallback_wc: new function, takes two wide characters c1 and
+	  c2, converts them to a pattern ([[=c2=]]) and a string (c1) for
+	  fnmatch to determine whether or not they are members of the same
+	  equivalence class
+	- collequiv_wc: call _fnmatch_fallback_wc if rangecmp_wc returns
+	  non-zero if FNMATCH_EQUIV_FALLBACK is defined, so we know that
+	  fnmatch understands equivalence classes. Another Posix test suite
+	  issue from Martin Rehak <martin.rehak@oracle.com>
+
+				   12/6
+				   ----
+redir.c
+	- add missing cases to switch statements to shut up gcc
+
+				   12/7
+				   ----
+builtins/set.def
+	- find_minus_o_option: new helper function, returns index into
+	  o_options given option name
+	- minus_o_option_value,set_minus_o_option: use find_minus_o_option
+
+general.c
+	- new table of variables (currently all shopt options) that are
+	  modified by going into and out of posix mode; num_posix_options()
+	  returns the number of variables
+	- get_posix_options: fill in a bitmap passed as an argument (or return
+	  a new one) of values of posix-mode-modified variables in the table
+	- set_posix_options: set values of posix-mode-modified variables from
+	  the table using the passed bitmap for values
+
+builtins/set.def
+	- get_current_options: make the bitmap large enough to hold the options
+	  in the set table and the table of posix-mode-modified variables; call
+	  get_posix_options to fill in those values after the values from the
+	  o_options table
+	- set_current_options: call set_posix_options to reset the values of
+	  the posix-mode-modified variables at the end of the bitmap, after
+	  the o_options values. Fixes issue reported by PJ Eby
+	  <pje@telecommunity.com>
+
+				   12/9
+				   ----
+parse.y
+	- select_command: add two additional productions to support select
+	  commands without a word_list following the `in'. Fixes omission
+	  reported by Martijn Dekker <martijn@inlv.org>
+
+				   12/11
+				   -----
+variables.c
+	- assign_in_env: don't allow namerefs in temporary environment
+	  assignments to create variables with invalid names for export. Fixes
+	  bug reported by Grisha Levit <grishalevit@gmail.com>
+
+				   12/14
+				   -----
+parse.y
+	- don't change last_command_exit_value in the 'error yacc_EOF' production
+	  if the parser sets it to something non-zero; just make sure it
+	  indicates an error. Fixes problem with unexpected EOF in eval
+	  reported by Martijn Dekker <martijn@inlv.org>
+
+				   12/17
+				   -----
+expr.c
+	- exp2 -> expmuldiv
+
+lib/sh/smatch.c
+	- fnmatch: add extern declaration if FNMATCH_EQUIV_FALLBACK is being
+	  used
+
+hashlib.c
+	- hash_string: add FNV offset as initial value for hash instead of
+	  starting at 0, changes hash for associative arrays and requires a
+	  bunch of changes to the "right" test suite files
+
+variables.c
+	- rseed: make it explicitly 32 bits; that's all we're interested in
+	  anyway
+
+				   12/18
+				   -----
+
+variables.c
+	- brand: add some comments, make the constants explicitly 32 bits;
+	  use signed 32-bit values for the intermediate calculations. The
+	  algorithm is still minstd
+
+[bash-5.0-rc1 frozen]
+
+				   12/21
+				   -----
+doc/bash.1
+	- }1: remove macro definition; it's outlived its bugfix purpose.
+	  Report from Derek Schrock <dereks@lifeofadishwasher.com>
+
+				   12/22
+				   -----
+subst.c
+	- expand_arith_string: set W_NOTILDE in the flags so we don't perform
+	  tilde expansion at all, even for the previously-special-case array
+	  subscript expansion. Report from Bize Ma <binaryzebra@gmail.com>
+	- expand_word_internal: take out Q_ARRAYSUB check for tilde expansion
+
+				   12/26
+				   -----
+builtins/evalstring.c
+	- parse_and_execute: if the eval builtin gets a parser error while
+	  parsing a  string in posix mode, don't exit the shell if the eval
+	  was run by the command builtin. report from Martijn Dekker
+	  <martijn@inlv.org>
+
+examples/loadables/{basename,dirname}.c
+	- dirname_builtin: skip over any `--' ending the options.  Report from
+	  Peng Yu <pengyu.ut@gmail.com>
+
+				   12/27
+				   -----
+examples/loadables/mkdir.c
+	- make_path: add argument noting whether or not the user specified -m;
+	  only attempt the chmod on an existing directory if the user did so
+	- make_path: when creating intermediate directories, perform the
+	  mkdir (path, 0) and chmod separately as the posix text recommends
+
+				   12/28
+				   -----
+parser.h
+	- PST_COMMENT: new state, set when the shell is reading characters
+	  until newline as part of comment processing
+
+parse.y
+	- shell_getc: don't return a space at the end of a token if the parser
+	  is consuming a comment. Fixes bug reported by Harald van Dijk
+	  <harald@gigawatt.nl>
+
+				   12/31
+				   -----
+lib/glob/glob_loop.c
+	- INTERNAL_GLOB_PATTERN_P: revert change from 4/27 that makes this
+	  function return non-zero for a backslash in the string. Based on a
+	  report from Tom Ryder <tom@sanctum.geek.nz>
+
+[bash-5.0 frozen]
+
+[bash-5.0 released]
+
+				 1/6/2019
+				 --------
+
+examples/loadables/basename.c
+	- make sure to include bashgetopt.h. Reported by Angel 
+	  <angel@16bits.net>
+
+lib/malloc/malloc.c
+	- stdlib.h: include if botch isn't defined to provide a declaration
+	  for abort()
+
+hashlib.c,Makefile.in
+	- fixes to make hash library testing work for others from
+	  Eduardo Bustamante <dualbus@gmail.com>
+
+lib/readline/unicode.c
+	- u32toutf16: correct the second argument to be wchar_t *, and treat
+	  it as such, even though it doesn't make a difference in practice.
+	  Report and fix from Eduardo Bustamante <dualbus@gmail.com>
+
+				    1/8
+				    ---
+
+builtins/return.def
+	- return_builtin: return EX_USAGE if we're not executing a shell
+	  function or sourcing a script, so a posix-mode shell exits. Fixes
+	  bug reported by Robert Hailey <bash@osndok.com>
+
+builtins/declare.def
+	- declare_internal: don't let `declare -f +f' turn off the function
+	  attribute. Fix from Grisha Levit <grishalevit@gmail.com>
+	- declare_internal: reject attempts to add the -A or -a attributes
+	  to functions. Report from Grisha Levit <grishalevit@gmail.com>
+
+				    1/9
+				    ---
+bashline.c
+	- completion_glob_pattern: new function, returns true if the passed
+	  string contains a glob pattern that should be process by the glob
+	  completion code. Completion glob patterns don't pay attention to
+	  backslashes unless they're the last character in the string. This
+	  is a different, more self-contained, fix for the problem reported
+	  by Tom Ryder <tom@sanctum.geek.nz>
+
+lib/glob/glob_loop.c
+	- INTERNAL_GLOB_PATTERN_P: restore change from 4/27 and make this
+	  function return non-zero if it encounters a backslash in the string.
+	  It needs to match pathexp.c:unquoted_glob_pattern_p(). Adds fix
+	  back for issue reported by axel@freakout.de
+
+test.c
+	- arithcomp: when calling evalexp, make sure to call it with the
+	  EXP_EXPANDED flag, since all arguments here have been evaluated
+	  already
+
+arrayfunc.c
+	- array_expand_index: call evalexp with EXP_EXPANDED flag, since we
+	  have run the string through expand_arith_string already
+
+				   1/11
+				   ----
+parser.h
+	- PST_ENDALIAS: new state, means we just consumed the last character
+	  of an alias expansion and returned the fake space
+
+parse.y
+	- shell_getc: add PST_ENDALIAS to parser_state before returning the
+	  fake space that marks the end of the alias, making sure to do it
+	  only once. With that set, fall through to the pop_string(), making
+	  sure to unset PST_ENDALIAS. Fixes alias bug reported by
+	  Ante Peric <synthmeat@gmail.com>
+
+				   1/12
+				   ----
+lib/glob/glob.c
+	- {extglob,wextglob}_skipname: make sure we check the rest of the
+	  pattern if the extglob pattern is null, and therefore won't match
+	  anything. If that is followed by a `.', quoted or unquoted, we can
+	  match a leading `.' in the pathname. This code is currently not
+	  active.
+
+builtins/hash.def
+	- hash_builtin: if -d is supplied without an argument, print an error
+	  message and return failure, just like -t without an argument. Fixes
+	  inconsistency reported by Dan Jacobson <jidanni@jidanni.org>
+
+				   1/13
+				   ----
+parse.y
+	- shell_getc: use shellblank when testing the last character of an
+	  alias to determine whether or not to add a trailing space instead
+	  of testing against a space only. These are the non-shell-metacharacters
+	  that can delimit words. Used together with PST_ENDALIAS
+
+				   1/17
+				   ----
+parse.y
+	- shell_getc: keep track of whether the last character read from
+	  shell_input_line is an unquoted backslash and don't add a space to
+	  the end of an alias if the alias value ends in an unquoted backslash.
+	  From an austin-group mailing list discussion message from
+	  Harald van Dijk <ag@gigawatt.nl>
+
+				   1/20
+				   ----
+general.c
+	- check_identifier: make sure CHECK_WORD is non-zero before we check
+	  whether or not the word consists of all digits. This allows function
+	  names to consist solely of digits when not in posix mode. From a
+	  report by Andrey Butirsky <butirsky@gmail.com>
+
+				   1/22
+				   ----
+bashline.c
+	- initialize_readline: only unbind ^E in vi_movement_keymap if it's
+	  still bound to the default rl_emacs_editing_mode. Fixes bug
+	  reported by Greg Bell <gbell_spamless@yahoo.com>
+
+				   1/23
+				   ----
+builtins/shopt.def
+	- we need the extern declaration for syslog_history if SYSLOG_HISTORY
+	  is defined, since it's used even if SYSLOG_SHOPT is not defined.
+	  From a Gentoo Linux bug report, eventually reported to bug-bash by
+	  Tomas Mozes <hydrapolic@gmail.com>
+
+				   1/25
+				   ----
+command.h
+	- CMD_TRY_OPTIMIZING: new command flag, means this (simple) command is
+	  a candidate for fork optimization (suppression)
+
+builtins/evalstring.c
+	- can_optimize_connection: new function, takes an AND_OR list (&& or
+	  ||) from parse_and_execute, makes sure it's the last in a possibly
+	  multi-command list, and returns non-zero if it's a simple command,
+	  indicating that it's a candidate for fork optimization.
+	- parse_and_execute: if we have a cm_connection command, call
+	  can_optimize_connection to determine if it's a suitable candidate
+	  and set CMD_TRY_OPTIMIZING if that returns non-zero
+	- optimize_fork: don't bother unless the rhs of the && or || command
+	  has the CMD_TRY_OPTIMIZING flag set. These fix the bug reported by
+	  Brad Spencer <bspencer@blackberry.com>
+
+execute_cmd.c
+	- execute_connection: case AND_AND and OR_OR: call optimize_fork on
+	  the right side of the command before executing `second'. This will
+	  safely restore the fork optimization we removed from
+	  parse_and_execute()
+
+builtins/complete.def
+	- build_actions: make sure the function name argument to -F is a
+	  valid shell function name: it doesn't contain any invalid posix-
+	  mode characters and doesn't contain any shell break characters that
+	  would need to be quoted when defining a function. Fixes issue
+	  reported by Great Big Dot <greatbigdot@gmail.com>
+
+				   1/28
+				   ----
+variables.c
+	- dispose_temporary_env: make sure to save temporary_env to a temp
+	  pointer and set temporary_env to NULL before trying to dispose it,
+	  so no flush function ever tries to add a temporary variable back
+	  into the table (e.g., bind_variable())
+
+				   1/29
+				   ----
+builtins/evalstring.c
+	- can_optimize_connection,optimize_fork: add the last command in lists
+	  separated by `;' to the list of candidates for fork optimization
+
+				   1/30
+				   ----
+examples/loadables/strftime.c
+	- strftime_builtin: try to extend the buffer longer than tbsize*3,
+	  which is a minimum of 24 characters, in case some of the formats
+	  (e.g., %c) expand to something longer than that. Fixes bug
+	  reported by Stan Marsh <gazelle@xmission.com>
+
+				   1/31
+				   ----
+lib/readline/undo.c
+	- rl_do_undo: before inserting text while undoing UNDO_DELETE, or
+	  performing a deletion while undoing UNDO_INSERT, make sure that
+	  rl_point is valid by calling _rl_fix_point. Fuzzing bug and fix
+	  from Eduardo Bustamante <dualbus@gmail.com>
+
+lib/readline/search.c
+	- _rl_nsearch_abort: validate new values for rl_point and rl_mark by
+	  calling _rl_fix_point(). Fuzzing bug and fix from
+	  Eduardo Bustamante <dualbus@gmail.com>
+
+subst.c
+	- string_extract_double_quoted: if we parse a syntactically-incorrect
+	  $( expression while extracting a double-quoted string, si will
+	  appear to go `backward'. Just skip over the rest of the string and
+	  continue. Fuzzing bug from Eduardo Bustamante <dualbus@gmail.com>
+
+lib/readline/text.c
+	- rl_change_case: if towupper or towlower returns a valid wide char
+	  that can't be converted back to a valid multibyte character, use
+	  the original character and go on. Fuzzing bug from
+	  Eduardo Bustamante <dualbus@gmail.com>
+
+lib/glob/glob.c
+	- wdequote_pathname: if there are no multibyte characters in pathname,
+	  just call udequote_pathname and don't bother converting it to wide
+	  characters
+	- glob_pattern_p: if there are no multibyte characters in the pattern,
+	  just call internal_glob_pattern_p right away
+
+lib/glob/glob_loop.c
+	- INTERNAL_GLOB_PATTERN_P: return 2 if we see only backslash-quoted
+	  characters without any other unquoted glob pattern characters, so
+	  interested callers can shortcut and just dequote the pathname
+
+pathexp.c
+	- unquoted_glob_pattern_p: return 2 if we see only backslash-quoted
+	  characters without any other unquoted glob pattern characters,
+	  consistent with the glob library
+	- unquoted_glob_pattern_p: don't count a backslash quoting a slash as
+	  a backslash that will trigger a call to shell_glob_filename, since
+	  backslashes at the end of patterns (pathname components) will always
+	  fail to match. XXX - this is provisional
+
+lib/glob/glob.c
+	- glob_filename: if we have a directory name that has no unquoted
+	  special glob chars, but has backslashes, just dequote it and return
+	  it without going through the rest of the glob expansions. Partial
+	  fix for issue with unreadable directories reported by
+	  Andrew Church <achurch+bash@achurch.org>
+
+				    2/2
+				    ---
+lib/readline/readline.c
+	- readline_internal_teardown: if revert-all-at-newline is set, make
+	  sure that the history position is at the end of the history before
+	  calling _rl_revert_all_lines(). Fixes bug reported by
+	  johnlinp@gmail.com and frederik@ofb.net
+
+				    2/4
+				    ---
+builtins/complete.def
+	- complete_builtin: fix check for argument to -F to use strpbrk
+	  instead of incomplete use of strcspn. Fix from Grisha Levit
+	  <grishalevit@gmail.com>
+
+				    2/5
+				    ---
+lib/readline/readline.c
+	- rl_parse_and_bind: change parsing of boolean variable values to
+	  look for and consume an optional whitespace-delimited word. This
+	  allows trailing spaces and everything that follows to work. Idea
+	  from Bize Ma <binaryzebra@gmail.com>
+	- rl_parse_and_bind: print error message about unknown variable names
+	  instead of calling rl_variable_bind to do it
+	- rl_variable_bind: report error if setting string variable returns
+	  non-zero
+
+				    2/6
+				    ---
+lib/readline/histfile.c
+	- read_history_range: close FILE before returning if the history file
+	  size is 0
+
+				   2/11
+				   ----
+bashline.c
+	- edit_and_execute_command: add the current line buffer to the history
+	  list even if it's empty and rely on other code in bash_add_history
+	  to take care to not add multiple semicolons with multiple blank
+	  lines and command_oriented_history. Live with the blank lines as
+	  history entries for now. Fixes problem reported by
+	  Johannes Hielscher <jhielscher@posteo.de>
+
+lib/readline/misc.c
+	- _rl_revert_all_lines: renamed to _rl_revert_previous_lines, since
+	  that is basically what it does
+	- _rl_revert_all_lines: now just makes sure the history offset is at
+	  the end of the history and calls _rl_revert_previous_lines. Inspired
+	  by a suggestion from johnlinp@gmail.com
+
+lib/readline/readline.c
+	- readline_internal_teardown: revert change of 2/2, moved that code
+	  into the (new) _rl_revert_all_lines
+
+lib/readline/rlprivate.h
+	- _rl_revert_previous_lines: new extern declaration
+
+builtins/bind.def
+	- bind_builtin: make sure the unwind-protect gets run when the --help
+	  option is used, so use `case GETOPT_HELP:' instead of `CASE_HELPOPT;'.
+	  Report and fix from Koichi Murase <myoga.murase@gmail.com>
+
+				   2/12
+				   ----
+lib/readline/util.c
+	- _rl_abort_internal: don't just turn off the MACRODEF state, call
+	  _rl_kill_kbd_macro to delete any traces of an in-progress macro
+	  definition before turning it off. Fixes fuzzing bug.
+
+				   2/13
+				   ----
+examples/loadables/Makefile.in
+	- CCFLAGS: add $(CPPFLAGS) to value, based on a report from
+	  Christian Weisgerber <naddy@mips.inka.de>
+
+				   2/15
+				   ----
+bashline.c
+	- posix_readline_initialize: keep track of the vi insertion keymap
+	  binding for TAB, since we change it in this function. Save the
+	  old binding before we change it when turning posix mode on, and
+	  restore that old binding when turning posix mode off, as long as
+	  the current binding is still rl_insert. Suggested by a report from
+	  Koichi Murase <myoga.murase@gmail.com>
+
+				   2/17
+				   ----
+builtins/exec.def
+	- exec_builtin: save value of job_control; use it to restore the value
+	  of job_control if an exec fails in an interactive shell instead of
+	  enabling it by default in an interactive shell. Report from
+	  Grisha Levit <grishalevit@gmail.com>
+
+lib/readline/bind.c
+	- _rl_function_of_keyseq_internal: make sure to use checks against LEN
+	  instead of a NULL character in KEYSEQ to determine the length of the
+	  key sequence.
+	  Report and fix from Koichi Murase <myoga.murase@gmail.com>
+	- rl_bind_key: make sure the KEY argument is not larger than the
+	  largest unsigned character.
+	  Report and fix from Koichi Murase <myoga.murase@gmail.com>
+	- rl_translate_keyseq: make sure that M-x correctly adds "\ex" to the
+	  key sequence array when convert-meta is set.
+	  Report and fix from Koichi Murase <myoga.murase@gmail.com>
+	- rl_translate_keyseq: now unconditionally converts meta characters to
+	  ESC-prefixed key sequences when processing \0nnn \Xnnn and \[char]
+	  escape sequences that resolve to meta characters and for `normal'
+	  characters that have the meta bit set
+	  Report and fix from Koichi Murase <myoga.murase@gmail.com>
+
+jobs.c
+	- end_job_control: if the terminal pgrp (terminal_pgrp) is not the same
+	  as the original pgrp (original_pgrp), set the terminal's pgrp to the
+	  original pgrp so when we reset the shell's pgrp to original_pgrp,
+	  we'll continue to be able to read from the terminal if the shell is
+	  interactive. Fixes bug with turning off job control before starting
+	  an interactive shell reported by Grisha Levit
+	  <grishalevit@gmail.com>
+
+				   2/19
+				   ----
+
+jobs.c
+	- end_job_control: if the setpgid(0, ...) succeeds, reset the value of
+	  shell_pgrp. Fixes pgrp mismatch after failed exec in an interactive
+	  login shell reported by Grisha Levit <grishalevit@gmail.com>
+
+				   2/20
+				   ----
+bashhist.c
+	- pre_process_line: save history_length before calling history_expand,
+	  and after possibly decrementing history_length, just restore the old
+	  value instead of incrementing it.  Fixes bug reported by
+	  Michael Albinus <michael.albinus@gmx.de>
+	- bash_add_history: don't bother calling really_add_history if the
+	  history is stifled and the max number of entries is 0
+
+aclocal.m4,configure.ac,m4/*.m4
+	- replace the old set of gettext m4 macros with the latest m4 files
+	  from the gnulib and gettext distributions
+
+				   2/21
+				   ----
+builtins/cd.def
+	- bindpwd: initialize canon_failed to 0 to prevent `cd -e' from always
+	  failing
+
+command.h
+	- W_EXPANDRHS: new flag, set when expanding WORD in ${paramOPword}
+
+subst.c
+	- expand_string_for_rhs: set W_EXPANDRHS in word to be expanded
+
+subst.c
+	- expand_word_internal: when encountering a single or double quoted
+	  string that expands to nothing, add a CTLNUL if the W_EXPANDRHS
+	  flag is set and the word isn't quoted, indicating that the word
+	  will eventually be split and we need to preserve the null to
+	  produce an empty word. From a discussion on bug-bash started by
+	  sunnycemetery@gmail.com
+
+				   2/22
+				   ----
+bashline.c
+	- completion_glob_pattern: make sure to skip over a character quoted
+	  by a backslash. Fixes bug reported by John Van Sickle
+	  <john.vansickle@gmail.com>
+
+				   2/23
+				   ----
+lib/readline/complete.c
+	- last_completion_failed: keep track of whether the last completion
+	  attempt generated any matches
+	- rl_complete: if the last readline command was completion, but the
+	  completion attempt didn't generate any matches, don't regenerate
+	  and display the match list. Treat it as a new completion attempt.
+	  Suggested by Richard Stallman <rms@gnu.org>
+
+bashhist.c
+	- maybe_append_history: try to handle the case where the number of
+	  history entries in the current shell session is greater than the
+	  number of entries in the history list. Based on a report from
+	  <airat_vi@mail.ru>
+
+				   2/25
+				   ----
+aclocal.m4
+	- BASH_FUNC_FNMATCH_EQUIV_FALLBACK: use en_US.UTF-8 instead of
+	  de_DE.UTF-8; it's more likely to be installed
+
+				   2/26
+				   ----
+doc/{bash.1,bashref.texi}
+	- extdebug: make sure to note that setting this option in a startup
+	  file causes an attempt to start the debugger. Noted by Linda
+	  Walsh <bash@tlinx.org>
+
+builtins/fc.def
+	- fc_builtin: if we are not listing, and delete the last history entry,
+	  make sure that histbeg or histend, whichever is greater, is clamped
+	  at the value of last_hist to avoid dereferencing the just-removed
+	  history index. Fixes bug reported by Chris King-Parra
+	  <chris@kingparra.work>
+
+				   2/27
+				   ----
+shell.c
+	- init_interactive: assignment to histexp_flag should be protected by
+	  #ifdef BANG_HISTORY. https://savannah.gnu.org/patch/?9759
+
+subst.c
+	- list_string: if we have a non-null string, but quoted null character
+	  removal leaves an empty string, set W_SAWQUOTEDNULL in the returned
+	  word flags so the caller can deal with it
+	- parameter_brace_expand_rhs: deal with word with null or empty word
+	  and W_SAWQUOTEDNULL in the flags coming back from expand_string_for_rhs
+	  by turning it into a quoted null word and modifying the flags. Part
+	  of fix for bug report from Grisha Levit <grishalevit@gmail.com>
+	- expand_word_internal: if a double-quoted string comes back with a
+	  quoted null as the expansion of "$@", note that we saw it, but still
+	  add a quoted null into the result string instead of short-circuiting.
+	  Part of fix for bug report from Grisha Levit <grishalevit@gmail.com>
+
+				    3/1
+				    ---
+examples/loadables/fdflags.c
+	- O_CLOEXEC: instead of not using it, synthesize a definition for it
+	  from unused bits in the file status word. It's only used as a
+	  placeholder anyway. Fix from code by Robert Elz <kre@bmunnari.oz.au>
+
+execute_cmd.c
+	- execute_connection: call optimize_fork on the rhs of a `;' connection
+	  to attempt to optimize the last simple command in a list
+
+				    3/4
+				    ---
+subst.c
+	- parameter_brace_expand: add `@' to the list of operators that cause
+	  unbound parameter errors. Fixes oversight bug reported by
+	  Martin Schulte <gnu@schrader-schulte.de>
+
+				    3/5
+				    ---
+subst.c
+	- expand_word_internal: update to fix from 2/21 and 2/27 to accommodate
+	  contexts when word splitting will not take place (W_ASSIGNRHS). Fix
+	  from Grisha Levit <grishalevit@gmail.com>
+	- param_expand: if IFS is unset, and we are expanding $* in a context
+	  where we're not going to be performing word splitting, just treat it
+	  as if IFS=" " and don't set W_SPLITSPACE. Report and hint at fix
+	  from Grisha Levit <grishalevit@gmail.com>
+	- param_expand: if IFS is not null, and we are expanding $* in a
+	  context where we're not going to be performing word splitting, and
+	  we quote a null string (resulting in a quoted null), make sure we
+	  set W_SAWQUOTEDNULL to note this for the caller
+	- parameter_brace_expand_rhs: make sure to remove any W_SAWQUOTEDNULL
+	  flag for a the word on the rhs of the `=' operator if the original
+	  string is null or the original string is not null and the returned
+	  string (after dequoting) is not null. For instance ${v= ''} should
+	  not have the SAWQUOTEDNULL flag set because it is " " after
+	  expansion and dequoting, even though we saw a quoted null there
+
+				    3/6
+				    ---
+lib/sh/eaccess.c
+	- sh_eaccess: AIX needs the same kind of additional checks as FreeBSD
+	  and Solaris when running as root and checking whether or not a file
+	  is executable. Report and fix from REIX, Tony <tony.reix@atos.net>
+
+				    3/7
+				    ---
+lib/glob/glob.h
+	- GX_RECURSE: new flag, indicates internal call to glob_filename
+
+lib/glob/glob.c
+	- glob_filename: add GX_RECURSE to recursive call to glob_filename
+	- glob_filename: dequote a directory name (in the absence of a
+	  filename) only if this is not a recursive call to glob_filename
+	  ((flags & GX_RECURSE) == 0). Fixes bug reported by Dr. Werner Fink
+	  <werner@suse.de>
+
+				    3/8
+				    ---
+parse.y
+	- handle_eof_input_unit: before calling exit_builtin, set
+	  last_shell_builtin and this_shell_builtin appropriately, since the
+	  exit builtin uses them to determine whether or not to exit
+	  immediately. Fixes bug reported by Tom Levy <tomlevy93@gmail.com>
+
+lib/sh/shquote.c
+	- sh_double_quote,sh_mkdoublequoted,sh_backslash_quote_for_double_quotes:
+	  make sure to handle multibyte characters that may contain characters
+	  that need to be quoted in double quotes; adding a spurious double
+	  quote may turn them into different characters or uncover characters
+	  that are special in double quotes. Fixes bug reported by
+	  Stephane Chazelas <stephane.chazelas@gmail.com>
+	- sh_backslash_quote: don't call COPY_CHAR_P if we're in a UTF-8
+	  locale and the current character doesn't have its eighth bit set;
+	  only check mb_cur_max and is_basic if we're not in a UTF-8 character
+	  set
+
+				    3/9
+				    ---
+subst.c
+	- read_comsub: if it looks like we're starting a multibyte character,
+	  read a whole multibyte character from buf and add it all at once,
+	  so we don't quote each byte in a multibyte character sequence. Fixes
+	  bug uncovered by shquote changes from 3/8
+
+				   3/11
+				   ----
+subst.c
+	- expand_word_internal: if we are in a context where word splitting
+	  will not occur, but one where we need to make sure we eventually
+	  expand "$@" to multiple words, add a space as quoted so we can still
+	  split on the space separator in $@. Fixes bug reported by
+	  Grisha Levit <grishalevit@gmail.com>
+
+				   3/13
+				   ----
+subst.c
+	- parameter_brace_substring, parameter_brace_patsub: treat the case
+	  where pflags includes PF_ASSIGNRHS the same as if IFS is null, since
+	  word splitting will not take place
+
+{subst,array,assoc}.c,subst.h
+	- string_list_pos_params: add a fourth argument: pflags; change all
+	  callers to initially pass 0 as fourth arg
+
+				   3/14
+				   ----
+subst.c
+	- expand_word_internal: split words with W_ASSIGNRHS flag set specially.
+	  These and subsequent changes fix expansion bugs reported by
+	  Grisha Levit <grishalevit@gmail.com>
+
+subst.c
+	- string_list_pos_params: if we are expanding `@', make sure we honor
+	  PFLAGS including PF_ASSIGNRHS and use string_list_dollar_at to make
+	  sure the positional parameters are separated by spaces
+	- string_list_pos_params: if we are expanding `*', make sure we honor
+	  PFLAGS including PF_ASSIGNRHS and separate the positional parameters
+	  with the first character of $IFS
+	- pos_params_pat_subst,pos_params_modcase: calculate appropriate value
+	  for PFLAGS depending on match flags value, and pass right value to
+	  string_list_pos_params (affects @, * expansion)
+	- pos_params: now takes PFLAGS as argument to pass to string_list_pos_params;
+	  changed caller
+
+array.c
+	- array_pat_subst,array_modcase: calculate appropriate value for
+	  PFLAGS depending on match flags value, and pass right value to
+	  string_list_pos_params (affects @, * subscript expansion)
+
+array.[ch]
+	- array_subrange: now takes additional PFLAGS argument to pass to
+	  string_list_pos_params
+
+assoc.c
+	- assoc_pat_subst,assoc_modcase: calculate appropriate value for
+	  PFLAGS depending on match flags value, and pass right value to
+	  string_list_pos_params (affects @, * subscript expansion)
+	  STILL NEED TO DO SUBRANGE
+
+subst.c
+	- parameter_brace_substring: add PFLAGS argument to array_subrange
+
+arrayfunc.c
+	- array_keys: use string_list_pos_params instead of calling
+	  string_list_dollar_{star,at} directly.
+
+arrayfunc.[ch]
+	- array_keys: now takes a PFLAGS argument, passes to string_list_pos_params
+
+subst.c
+	- parameter_brace_expand: add PFLAGS argument to call to array_keys
+
+subst.c
+	- parameter_brace_expand_indir: now takes a PFLAGS argument and uses it
+	  in the call to parameter_brace_expand_word
+	- parameter_brace_expand: add PFLAGS argument to call to
+	  parameter_brace_expand_indir
+
+				   3/15
+				   ----
+subst.c
+	- chk_atstar: now takes a PFLAGS parameter, changed callers. Will
+	  eventually affect whether or not we saw $@
+	- chk_atstar: if we see "$*" don't note that we saw $@ unless
+	  expand_no_split_dollar_star is unset. This is what param_expand
+	  does
+
+				   3/18
+				   ----
+lib/readline/misc.c
+	- rl_get_previous_history: if we are trying to go back from the
+	  beginning of the history, or if we are trying to go back before the
+	  beginning of the history, call _rl_free_saved_history_line to just
+	  get rid of the history line we saved instead of using
+	  rl_maybe_unsave_line, which modifies the current line buffer.
+	  Fixes bug reported by lessbug <lessbug@qq.com>
+
+				   3/20
+				   ----
+execute_cmd.c
+	- execute_command_internal: save and restore line_number around
+	  user_subshell setting it to the line number saved in the command.
+	  Fixes bug reported in https://bugzilla.novell.com/show_bug.cgi?id=1128936
+
+				   3/21
+				   ----
+lib/sh/strtrans.c
+	- ansicstr: handle multibyte characters that are not preceded by a
+	  backslash so we skip over potential escapes in characters whose
+	  multibyte representation contains a backslash. Fixes issue reported by
+	  Stephane Chazelas <stephane.chazelas@gmail.com>
+
+subst.c
+	- reap_some_procsubs: reap_procsubs, but parameterized to take the
+	  max index to check -- general function for future use
+	- reap_procsubs: now just calls reap_some_procsubs with the right arg
+
+execute_cmd.c
+	- execute_command_internal: if we are using /dev/fd for process
+	  substitution, reap the procsubs at the end of this function (FIFOs
+	  do it at the beginning -- look at this more closely). Only do it
+	  for loops to avoid fd exhaustion. Fixes bug reported by
+	  sunnycemetery@gmail.com
+
+				   3/22
+				   ----
+lib/readline/{rlprivate.h,signals.c}
+	- _rl_interrupt_immediately: removed as no longer used
+
+redir.c
+	- heredoc_expand: new function, called for both here-documents and
+	  here-strings, takes care of expanding the document and returns a
+	  string
+	- write_here_document: use heredoc_expand, call write(2) once on the
+	  entire document; structure is now very similar to write_here_string
+
+				   3/23
+				   ----
+redir.c
+	- here_document_to_fd: expand the here document/here string first,
+	  using heredoc_expand, then decide what to do; remove calls to
+	  write_here_document/write_here_string in favor of calling
+	  heredoc_write directly
+	- here_document_to_fd: if the expanded document is of zero length,
+	  just open /dev/null right away and return it -- idea from yash
+	- here_document_to_fd: if the length of the expanded document is
+	  between 1 and PIPESIZE (pipe capacity, computed by builtins/psize.aux
+	  and stored in builtins/pipesize.h), try to use a pipe: write
+	  the document to the write end and return the read end. Prompted by a
+	  report from Daniel Kahn Gillmor <dkg@fifthhorseman.net>
+
+builtins/enable.def
+	- dyn_load_builtin: add warning if dynamic builtin with a load function
+	  is loaded more than once, before running the load function a second
+	  time. From a suggestion by Stan Marsh <gazelle@xmission.com>
+
+				   3/25
+				   ----
+jobs.[ch]
+	- wait_for_any_job: takes a new argument, a struct procstat * that
+	  gets the PID of the exited job's process leader (the one that
+	  contributes the status) and the same status we return from the
+	  function
+
+builtins/wait.def
+	- wait_builtin: pass a struct procstat * to wait_for_any_job to get
+	  the pid of the job's process leader (and the same status the
+	  function returns). We don't do anything with it yet
+
+				   3/28
+				   ----
+variable.c
+	- seedrand: add a couple more variables to the random seed
+
+lib/sh/tmpfile.c
+	- sh_mktmpdir: new function, makes a temporary directory using
+	  mkdtemp if it's available, and generates a filename using
+	  sh_mktmpname (which uses mktemp, if available) and makes a
+	  directory with it if not
+
+config-{top,bot}.h
+	- set up to use mkdtemp if available
+
+externs.h
+	- sh_mktmpdir: extern declaration
+	- MT_TEMPFILE: new flag for the tempfile functions; means to use the
+	  value in the NAMEROOT argument as a template for the mktemp/mkstemp/
+	  mkdtemp functions. Not used in mainline shell code
+
+examples/loadables/mktemp.c
+	- mktemp: new loadable builtin, with BSD options and basic semantics
+
+				   3/29
+				   ----
+builtins/common.c,builtins/printf.def
+	- builtin_bind_variable: moved bind_printf_variable to common.c from
+	  printf.def, renamed to builtin_bind_variable, made global for other
+	  builtins to use
+
+builtins/read.def
+	- bind_read_variable: now uses builtin_bind_variable
+
+				    4/4
+				    ---
+lib/readline/histfile.c
+	- history_rename: wrapper function for rename(2) to deal with the Win32
+	  refusal to rename over an existing file; changed callers. Bug and fix
+	  from <john.david.donoghue@gmail.com>
+
+				    4/8
+				    ---
+builtins/trap.def
+	- display_traps,showtrap: take an additional int argument, that, if
+	  non-zero, means to print a trap command for a signal whose disposition
+	  is SIG_DFL
+	- trap_builtin: if the -p option is given, and posix mode is enabled,
+	  pass the `show every signal' flag to display_traps so SIG_DFL signals
+	  are displayed as `trap -- - <signal>'. From an austin-group
+	  interpretation (1212) initiated by Robert Elz <kre@bmunnari.oz.au>.
+	  Tagged for bash-5.1
+
+				    4/9
+				    ---
+jobs.c
+	- list_one_job: printing one job counts as notifying the user about
+	  it, so add a call to cleanup_dead_jobs like in the other job display
+	  functions. Fixes https://savannah.gnu.org/support/?109667 reported
+	  by "Brian K. White"
+
+				   4/10
+				   ----
+redir.c
+	- HEREDOC_PIPESIZE: define to PIPESIZE if not defined, allow it to be
+	  specified at build time; used in here_document_to_fd to determine
+	  whether or not a pipe is used
+	- HEREDOC_PIPEMAX: allow build-time definition of the max heredoc size
+	  that will be written to a pipe
+	- here_document_to_fd: if F_GETPIPE_SZ is defined (Linux), ensure that
+	  the document is shorter than the possibly-dynamic max pipe size,
+	  and fall back to the tempfile implementation if it is not
+	- HEREDOC_PARANOID: if this is defined to a non-zero value,
+	  here_document_to_fd ensures that both file descriptors opened on
+	  the temporary file refer to the same file
+
+lib/sh/zmapfd.c
+	- zmapfd: increased the default allocation sizes
+
+lib/sh/zcatfd.c
+	- zcatfd: increased the default allocation sizes
+
+input.c
+	- localbuf: increased the default buffer size for reads
+
+				   4/11
+				   ----
+subst.c
+	- cond_expand_word: like expand_word_unsplit, we need to peform
+	  quoted null character removal on both the LHS and RHS of the
+	  operator, since we are not performing word splitting. Fixes bug
+	  reported by Matt Whitlock in https://savannah.gnu.org/support/?109671
+
+				   4/12
+				   ----
+jobs.c
+	- wait_for_background_pids: don't bother with the loop that waits for
+	  and reaps all children of the shell in the case that it's inherited
+	  some children it doesn't care about. Report from Daniel Kahn Gillmor
+	  <dkg@fifthhorseman.net>
+
+				   4/14
+				   ----
+subst.c
+	- command_substitute: add an unwind-protect to make sure the read end
+	  of the pipe gets closed in the parent on a SIGINT that interrupts
+	  the zread. Fixes fast SIGINT fd leak reported by Tycho Kirchner
+	  <tychokirchner@mail.de>
+
+bashhist.c
+	- history_number: if enable_history_list is set (`set -o history' has
+	  been executed), return the current history number even if we're
+	  not currently saving commands in the history list
+	  (remember_on_history == 0). Prompted by report from Paul Wise
+	  <pabs3@bonedaddy.net>
+
+				   4/20
+				   ----
+doc/bash.1,lib/readline/doc/rluser.texi
+	- make it clear that the `bind' builtin can be used to set readline
+	  keybindings and variables. Suggestion from Dan Jacobson
+	  <jidanni@jidanni.org>
+
+				   4/22
+				   ----
+lib/glob/glob.h
+	- GX_SYMLINK: new internal flag denoting we are processing a symlink to
+	  a directory. If GX_GLOBSTAR is active, we should not `descend' into
+	  that directory
+
+lib/glob/glob.c
+	- glob_filename: if the directory portion of the pattern is `**'
+	  (all_starstar), we have globbed all of the directories corresponding
+	  to that pattern, and we encounter a name that is a symlink to a
+	  directory, don't descend into it: if the filename portion is null,
+	  return that name only; if the filename portion is non-null, skip over
+	  it because we will pick it up when we process the `real' directory.
+	  This is a better fix for the issue originally reported by
+	  Murukesh Mohanan <murukesh.mohanan@gmail.com> back in 4/2018 and
+	  addresses the issue raised by Eli Schwartz <eschwartz@archlinux.org>
+	- glob_dir_to_array: slight optimization: if array[i] is the empty
+	  string, don't bother to strcpy it or check the result for a directory
+	  for GX_MARKDIRS support
+
+				   4/23
+				   ----
+bashline.c
+	- test_for_canon_directory: test a pathname for a directory, but
+	  expand and canonicalize it first using bash_filename_stat_hook()
+	  before calling stat(2)
+	- bash_progcomp_ignore_filenames: strip non-directories out of a match
+	  list, but use the function above that canonicalizes the pathname to
+	  expand the name before testing
+	- bash_directory_completion_matches: use bash_progcomp_ignore_filenames
+	  to strip out non-directories so we get consistent results between
+	  programmable completion and tab completion. Fixes bug reported by
+	  Ville Skyttä <ville.skytta@iki.fi>
+
+builtins/read.def
+	- read_builtin: allow read -e and read -u N to be used together, by
+	  calling fdopen(fd) if fd != 0. Save and restore rl_instream. Fixes
+	  https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=927768
+
+				   4/24
+				   ----
+lib/readline/input.c
+	- rl_getc: if readline catches SIGTSTP, the calling application must
+	  not have had it ignored. Run the signal handler and set the signal
+	  hook in case the application wants to handle it. Report from
+	  Robert Elz <kre@bmunnari.oz.au>
+
+				   4/26
+				   ----
+parse.y
+	- parser_will_prompt: check and return true if we have consumed the
+	  entire readline line buffer and will have to go back to readline for
+	  more input, printing a prompt as a consequence
+
+eval.c
+	- parse_command: if parser_will_prompt() returns 0, indicating that we
+	  still have unconsumed input in the readline line buffer, don't
+	  execute PROMPT_COMMAND. TENTATIVE fix prompted by report from
+	  Matteo Landi <matteo@matteolandi.net>
+
+builtins/read.def
+	- set_eol_delim: save the old values before changing the bindings for
+	  RETURN and the delimiter character, in case the delimiter is RETURN.
+	  Fixes bug report from Stephane Chazelas <stephane.chazelas@gmail.com>
+	- read_builtin: if the delimiter is '\0' and we are using readline,
+	  don't terminate the buffer and go back to read another character;
+	  allow the NULL to pass through and terminate the read.
+	  Fixes bug report from Stephane Chazelas <stephane.chazelas@gmail.com>
+
+				    5/9
+				    ---
+bashhist.c
+	- bash_delete_histent: decrement history_lines_this_session only if
+	  remove_history returns a non-null history entry, and return failure
+	  if it does return a null entry
+
+builtins/history.def
+	- history_builtin: when checking the argument to -d, display an error
+	  if the argument is >= history_base + history_length, since that's
+	  what history_get and remove_history check. Fixes issue reported by
+	  <jr@saturn.site>
+
+support/shobj-conf
+	- hpux11: change stanza to create shared libraries on later versions of
+	  HPUX 11. Contributed by Michael Osipov <michael.osipov@siemens.com>
+
+lib/readline/terminal.c
+	- _rl_init_terminal_io: assume TGETENT_BROKEN defined means that tgetent
+	  returns 0 on success, as on HPUX 11. Bug reported by Michael Osipov
+	  <michael.osipov@siemens.com>
+
+configure.ac
+	- hpux: add -DTGETENT_BROKEN to LOCAL_CFLAGS
+
+execute_cmd.c
+	- select_builtin: set executing_builtin around the call to read_builtin
+	  so we can run traps if the read call is interrupted. From a report
+	  from Andreas Kusalananda Kähäri <andreas.kahari@abc.se>
+
+				   5/12
+				   ----
+doc/bashref.texi
+	- The Restricted Shell: add some language detailing the weaknesses of
+	  the restricted shell mode in isolation, inspired by a discussion on
+	  the zsh mailing list
+
+				   5/15
+				   ----
+xmalloc.h
+	- malloc: define to sh_malloc to get file and line information from
+	  malloc (not xmalloc) calls. From a suggestion by achurch@achurch.org
+	  (Andrew Church)
+
+builtins/evalstring.c
+	- parse_and_execute: make sure the parser is not expanding an alias
+	  before terminating the loop that processes characters in the string.
+	  Fixes problem with -c commands that end with an alias reported by
+	  Yu Kou <ckyoog@gmail.com>
+	- should_suppress_fork: make sure that we don't try to optimize out a
+	  fork if the parser is still expanding an alias
+
+				   5/16
+				   ----
+lib/readline/misc.c
+	- rl_get_previous_history: if previous_history() returns NULL, only
+	  free the saved history if we were the ones who saved it; leave any
+	  existing saved history entry alone. Fixes problem with ^N not working
+	  at the end of the history if we previously moved back to the start
+	  of history
+
+lib/readline/histfile.c
+	- read_history_range: when reading until FROM lines with a history
+	  file that has timestamps, make sure to skip to the end of the command
+	  line corresponding to the FROMth line instead of leaving line_start
+	  pointing to it, and keep track of the start of the last timestamp in
+	  last_ts for use by the loop below. Fix for history -n bug reported
+	  by HIROSE Masaaki <hirose31@gmail.com>
+
+lib/readline/display.c
+	- init_line_structures: if, for some reason, _rl_screenwidth ends up
+	  bigger than the line_size default of 1024 (e.g., gdb's setting the
+	  terminal width to 0), make sure line_size is at least _rl_screenwidth.
+	  From a report by Tom de Vries <tdevries@suse.de>
+
+				   5/17
+				   ----
+variables.c
+	- brand: split the code into a function that generates a 32-bit value
+	  given the last value in the sequence (intrand32) and a function that
+	  returns a 16-bit random number (brand)
+	- seedrand: small change in hopes of adding slightly more entropy
+	- brand: modify the 16-bit version to XOR the top 16 bits of the 32-bit
+	  seed with the bottom 16 bits and return the lower 15 bits of that
+	  result as before. Based on an analysis by Andrew Church
+	  <achurch+bash@achurch.org>
+
+				   5/18
+				   ----
+variables.c
+	- genseed: break code that generates the 32-bit seed for the RNG into
+	  a separate function; call from seedrand
+	- {brand32,sbrand32,seedrand32}: new 32-bit versions of the random
+	  number generator functions that use the entire 32-bit internal value.
+	  Prep for systems that don't have /dev/urandom or arc4random()
+	- perturb_rand32: shake up the 32-bit LCRNG in subshells
+
+				   5/19
+				   ----
+variables.c
+	- get_urandom32: get a 32-bit random number by using the first one of
+	  these that succeeds: reading from /dev/urandom (if available),
+	  calling arc4random (if available), and using the internal 32-bit
+	  RNG (always available)
+	- SRANDOM: expand to a 32-bit random number. This is not a LCRNG, so
+	  the numbers shouldn't have any relationship to previous returned
+	  values. Assignments are accepted but have no effect on the sequence.
+	  Not documented yet
+
+				   5/20
+				   ----
+doc/{bash.1,bashref.texi}
+	- SRANDOM: document new special variable
+
+				   5/22
+				   ----
+jobs.c
+	- find_pid_in_pipeline: abstract some code from find_pipeline to look
+	  for a PID in a specific pipline passed as an argument
+	- find_pipeline: if we have some saved pipeline(s), look there to find
+	  the PID instead of returning failure. This process could have been
+	  started from a DEBUG trap that saved the_pipeline. Fixes Linux bug
+	  reported by Hengyang Zhao <hzhao877502@gmail.com>
+
+builtins/bind.def
+	- unbind_keyseq: use rl_function_of_keyseq_len so you can unbind ^@
+	  (which translates to 0). Fixes bug reported by
+	  Dennis Williamson <dennistwilliamson@gmail.com>
+
+				   5/23
+				   ----
+lib/readline/display.c
+	- rl_redisplay: make sure that the line structures can hold up to
+	  _rl_screenwidth characters, to support applications like gdb that
+	  set the screen width to huge values. Report and fix from
+	  Tom de Vries <tdevries@suse.de>
+
+				   5/24
+				   ----
+lib/readline/bind.c
+	- rl_generic_bind: move `ic' from block scope to function scope to
+	  avoid problems with compilers that destroy and recreate it every
+	  time through the loop. Report and fix from Adam Richter
+	  <adamrichter4@gmail.com>
+
+				   5/30
+				   ----
+jobs.c
+	- wait_for_job: now takes an additional struct procstat * argument,
+	  and returns the pid and status of the job's `controlling process'
+	  to the caller
+
+{jobs,nojobs}.c
+	- wait_for_background_pids: take a struct proctstat * argument and fill
+	  it in with pid and status of the last process to terminate
+
+jobs.h
+	- wait_for_job, wait_for_background_pids: add additional argument to
+	  declaration
+
+builtins/wait.def
+	- wait_builtin: set pstat.{pid,status} each time through the pid-or-job
+	  loop and for wait without arguments
+
+				    6/4
+				    ---
+sig.c
+	- termsig_handler: clean up last_procsub_child before exiting, after
+	  unlinking all FIFOs or closing FDs to all the pipes. Might need to
+	  send it a SIGTERM too. Fixes issue reported by mwnx <mwnx@gmx.com>
+
+config-top.h
+	- CASEMOD_CAPCASE: no longer defined by default
+
+				    6/5
+				    ---
+lib/glob/glob.c
+	- glob_always_skip_dot_and_dotdot: new global variable, if set to
+	  a non-zero value, no glob pattern will ever match `.' or `..'.
+	  Disabled by default
+
+				    6/7
+				    ---
+bashline.c
+	- cmd_xmap: changes to support multiple cmd_xmaps, one per editing
+	  mode keymap (one each for vi insert and command modes). Changes from
+	  Koichi Murase <myoga.murase@gmail.com>
+
+execute_cmd.c
+	- execute_arith_command: change from expanding the expression using
+	  expand_words_no_vars to use expand_arith_string, with the accompanying
+	  conversion from a WORD_LIST into a string. This makes it more
+	  consistent with other arithmetic expansions. Inspired by a
+	  discussion begun by Nils Emmerich <nemmerich@ernw.de>
+
+				   6/10
+				   ----
+jobs.c
+	- waitchld: since process substitutions are asynchronous, save the
+	  status of one that exits (that we still know about) in the bgpids
+	  list
+
+				   6/12
+				   ----
+jobs.c
+	- wait_for_background_pids: wait for the last procsub only if it's the
+ 	  same as last_asynchronous_pid
+
+bashline.c
+	- bash_backward_shellword: changes to behave better when at the
+	  beginning of the last character on the line and to leave point at
+	  the beginning of the shellword, like backward-word. Fixes from
+	  Andrew Gaylard <a.gaylard@gmail.com>
+
+				   6/13
+				   ----
+bashline.c
+	- __P: Replaced with PARAMS. First of many
+	- bash_transpose_shellwords: transpose-words, but using `shellword'
+	  word boundaries like shell-forward-word and shell-backward-word.
+	  Contributed by Andrew Gaylard <a.gaylard@gmail.com>
+	- "shell-transpose-words": new name binding for bash_transpose_shellwords
+	- bash_readline_initialize: add default bindings for shell-forward-word,
+	  shell-backward-word, shell-transpose-words, and shell-kill-word.
+	  Suggested by Andrew Gaylard <a.gaylard@gmail.com>
+
+lib/readline/doc/rluser.texi
+	- shell-transpose-words: document
+	- {shell-forward-word,shell-backward-word,shell-kill-word,shell-transpose-words}:
+	  document new default bindings bash now adds
+
+variables.c
+	- set_argv0: function to assign argv0 if it's found in the initial
+	  shell environment. Suggested by Cuong Manh Le
+	  <coung.manhle.vn@gmail.com>
+	- initialize_shell_variables: call set_argv0() as part of shell
+	  initialization
+
+				   6/14
+				   ----
+execute_cmd.c
+	- execute_for_command: make sure to call stupidly_hack_special_variables
+	  on the index variable each time bind_variable is called on it. If
+	  someone does something nonsensical like `for OPTIND in ...' we want
+	  the side effects to happen. Reported by Stephane Chazelas
+	  <stephane.chazelas@gmail.com>
+	- execute_select_command: do the same thing for the selection variable
+	  after calling bind_variable
+
+				   6/15
+				   ----
+builtins/set.def
+	- unset_builtin: if neither -f nor -v is supplied, and a NAME cannot
+	  be a shell variable because it's not a shell identifier, try to
+	  unset a shell function whether we're in posix mode or not. Suggested
+	  back in 1/2019 by PePa65 <solusos@passchier.net> and Robert Elz	
+	  <kre@bmunnari.oz.au>
+
+execute_cmd.c
+	- execute_simple_command: if this is being executed by the command
+	  builtin (flags&CMD_COMMAND_BUILTIN), don't bother to print the
+	  command words if set -x is enabled. From a report by Martijn Dekker
+	  <martijn@inlv.org> back in 4/2018
+
+				   6/19
+				   ----
+lib/glob/glob.c
+	- glob_filename: if we are not being called recursively, and there is
+	  only a directory name, dequote the passed pathname and see if it
+	  names an existing directory. If it does, return it; otherwise return
+	  failure ((char **)&glob_error_return). This is what makes backslash
+	  escaped-characters in pathnames in shell variables work the same as
+	  the same value passed directly. From an anonymous comment on
+	  https://savannah.gnu.org/support/?109629 and a discussion on the
+	  austin-group list.
+
+				   6/20
+				   ----
+pathexp.c,lib/glob/glob.c
+	- posix_glob_backslash: variable to control whether or not pathname
+	  expansion handles backslashes in the pattern the way Posix says it
+	  should. Enabled by default
+
+pathexp.h
+	- posix_glob_backslash: new extern declaration
+
+builtins/shopt.def
+	- posixglob: new option, reflects the value of posix_glob_backslash
+
+general.c
+	- posix_vars: add posix_glob_backslash to the table
+	- posix_initialize: set posix_glob_backslash to 1 when turning on
+	  posix mode
+
+				   6/21
+				   ----
+doc/{bash.1,bashref.texi}
+	- pathname expansion: note that under some circumstances the shell
+	  will invoke the matching engine for words with unquoted backslashes
+	- posixglob: document the new shell option and its effects
+
+				   6/27
+				   ----
+{config.h.in,configure.ac}
+	- setresuid,setresgid: check and set HAVE_{DECL,}_SETRES[UG]ID as
+	  appropriate
+
+shell.c
+	- disable_priv_mode: if we have setres[ug]id, use them over
+	  set[ug]id, which only set the save user-id and group-id if the
+	  process is running as root. From Ian Eldred Pudney
+	  in https://savannah.gnu.org/patch/?9822
+
+				   6/28
+				   ----
+lib/glob/glob.c
+	- glob_vector: don't bother trying to read the directory if the filename
+	  pattern doesn't have any globbing characters except backslash; just
+	  dequote the pattern and try to lstat(2) it as if there were no
+	  globbing characters at all. From an austingroup-bugs discussion
+	  message from Stephane Chazelas <stephane.chazelas@gmail.com>
+
+bashline.c
+	- completion_glob_pattern: just call glob_pattern_p and make sure it
+	  returns 1 (non-backslash globbing characters)
+
+builtins/help.def
+	- help_builtin: don't try pattern matching the help topic argument
+	  unless glob_pattern_p returns 1
+
+pathexp.c
+	- unquoted_glob_pattern_p: when in a bracket expression (open > 0),
+	  don't allow an unquoted slash as part of the bracket expression.
+	  Report from Stephane Chazelas <stephane.chazelas@gmail.com>
+
+				    7/1
+				    ---
+print_cmd.c
+	- print_function_def,named_function_string: make sure to call
+	  PRINT_DEFERRED_HEREDOCS to finish printing any here documents and
+	  delimiters before printing the function closing brace. Fixes bug
+	  reported by Denis McKeon <dmckeon@swcp.com>
+
+execute_cmd.c
+	- execute_command_internal: call reap_procsubs at the end of executing
+	  a group command on systems that have /dev/fd. Fixes bug reported by
+	  kfm@plushkava.net
+
+				    7/3
+				    ---
+jobs.c
+	- waitchld: this is in the potential SIGCHLD path, so don't call
+	  bgp_add, which can potentially call malloc. The glibc malloc doesn't
+	  handle that well. Report from howaboutsynergy@protonmail.com
+
+				    7/5
+				    ---
+builtins/bind.def
+	- bind_builtin: make sure return_code is >= 0 before returning it.
+	  Fixes bug with bind -x and invalid key sequences reported by
+	  bashbug@jonkmans.nl
+
+				    7/8
+				    ---
+doc/{bash.1,bashref.texi}
+	- unset: fixed up list of special variables that lose their special
+	  properties if they are unset. Report and fix from Edward Huff
+	  <ejhuff@gmail.com>
+
+				    7/9
+				    ---
+test.c
+	- unary_test: update the `-N' test to use timespecs and nanosecond
+	  granularity if available, and use mtime > atime instead of the
+	  old mtime >= atime. Fixes bug reported by kfm@plushkava.net
+
+lib/sh/strtod.c
+	- strtod: make sure to use locale_decpoint() to determine the radix
+	  character
+
+				   7/11
+				   ----
+lib/sh/utf8.c
+	- utf8_mblen: return -2 if the UTF-8 sequence is incomplete
+	- utf8_mblen: 4-byte UTF-8 characters start with a byte <= 0xf4; limit
+	  to 4-byte UTF-8 (since 5- and 6-byte code points were removed in 2003)
+
+				   7/12
+				   ----
+parse.y,shell.h
+	- sh_input_line_state_t: if HANDLE_MULTIBYTE is defined, add members
+	  for saving shell_input_line_property and its associated size; let
+	  save_line_state and restore_line_state manage it. This means
+	  restore_line_state no longer calls set_line_mbstate. From a report
+	  from astian <astian@e-nautia.com>
+
+parse.y
+	- set_line_mbstate: if the current locale is not multibyte, just set
+	  everything in the property array to 1
+	- set_line_mbstate: use locale_utf8locale to optimize away calls to
+	  mbrlen; just use utf8_mblen
+
+				   7/14
+				   ----
+variables.c
+	- sv_tz: remake the export env if TZ is being unset. Fixes bug
+	  reported by Travis Everett <travis.a.everett@gmail.com>
+
+lib/readline/display.c
+	- rl_expand_prompt: if the prompt contains embedded newlines, compute
+	  local_prompt_prefix before local_prompt because each call sets
+	  local_prompt_newlines, and we want the values computed in the call
+	  that uses local_prompt to be the ones that we use. Fixes prompt
+	  wrapping bug reported by Tianon Gravi <admwiggin@gmail.com>
+
+				   7/16
+				   ----
+Makefile.in
+	- added a number of dependencies from Vemake Vemake
+	  <vemakereporter@gmail.com> as reported in
+	  http://savannah.gnu.org/patch/download.php?file_id=47219
+
+				   7/19
+				   ----
+lib/sh/utf8.c
+	- utf8_mblen: changes to handle invalid multibyte sequences better,
+	  even when N means that the sequence would be too short anyway
+
+arrayfunc.c
+	- bind_assoc_var_internal: new convenience function to assign a
+	  key-value pair to an associative array. It gets the SHELL_VAR * AND
+	  a HASH_TABLE *, which may or may not correspond to the assoc_cell
+	  of the variable, and performs the insertion into the hash table.
+	  Callers take care of passing the right values.
+	- bind_assoc_variable: call bind_assoc_var_internal to do the real
+	  work
+	- assign_compound_array_list: change to assign associative array
+	  key-value pairs into a new hash table (NHASH), so we can still use
+	  the old value for expansion. We do this in place of clearing out
+	  the contents of the associative array before performing the expansion
+	  and assignments. After doing all the assignments into NHASH, we swap
+	  NHASH into the variable as its value and dispose of the old value.
+	  Fixes inconsistency reported by Darren 'Tadgy' Austin
+	  <darren@afterdark.org.uk>
+
+				   7/20
+				   ----
+aclocal.m4
+	- include bashansi.h in a bunch of AC_TRY_RUN recipies to avoid
+	  exit() being flagged as an implicit declaration. Report and fix
+	  from Chris Yungmann <yungmann.chris@gmail.com>
+
+shell.c
+	- set_exit_status: set last_command_exit_value to the argument and make
+	  sure to set PIPESTATUS from that exit value
+
+shell.h
+	- set_exit_status: extern declaration
+
+parse.y
+	- report_syntax_error: make sure to set PIPESTATUS if we set
+	  last_command_exit_value on a syntax error
+	- parse_string_to_word_list,parse_compound_assignment: set PIPESTATUS
+	  when we set last_command_exit_value
+
+sig.c
+	- throw_to_top_level,sigint_sighandler: set PIPESTATUS when we set
+	  last_command_exit_value
+
+variables.c
+	- sv_locale: call set_exit_status to set PIPESTATUS and last_command_exit_value
+
+arrayfunc.c
+	- find_or_make_array_variable,array_expand_index,assign_compound_array_list:
+	  call set_exit_status to set PIPESTATUS and last_command_exit_value
+
+builtins/evalstring.c
+	- parse_and_execute: set PIPESTATUS when we set last_command_exit_value
+
+braces.c
+	- brace_expand: call set_exit_status to set PIPESTATUS and last_command_exit_value
+
+eval.c
+	- reader_loop: call set_exit_status to set PIPESTATUS and last_command_exit_value
+
+make_cmd.c
+	- set PIPESTATUS when setting $? due to syntax errors or constructs
+	  not being available
+
+expr.c
+	- expr_streval: set PIPESTATUS when setting $? due to syntax errors
+
+subst.c
+	- extract_delimited_string,extract_dollar_brace_string,do_assignment_internal,
+	  call_expand_word_internal,array_length_reference,param_expand,
+	  parameter_brace_expand_word,parameter_brace_expand_rhs,
+	  parameter_brace_expand_error,parameter_brace_expand,err_unboundvar:
+	  set PIPESTATUS when setting last_command_exit_value on error
+	  conditions
+
+redir.c
+	- REDIRECTION_ERROR: set PIPESTATUS when setting last_command_exit_value
+	  on error conditions
+
+subst.c
+	- match_upattern,match_wpattern: if the match length is greater than the
+	  string length, short-circuit and return failure.  Fixes bug
+	  reported by Eduardo Bustamante <dualbus@gmail.com>
+
+				   7/22
+				   ----
+lib/glob/sm_loop.c
+	- BRACKMATCH: if we think we've matched, tighten up the rules for
+	  the closing right bracket in the bracket expression to be correct
+	  in the presence of invalid character classes, collating symbols,
+	  and equivalence classes. If they're invalid, they shouldn't require
+	  additional right brackets to close them
+
+				   7/25
+				   ----
+builtins/colon.def
+	- add the right includes so colon_builtin and false_builtin can take
+	  a WORD_LIST * argument like the prototype says they do
+
+				   7/29
+				   ----
+lib/readline/kill.c
+	- _rl_read_bracketed_paste_prefix: read the character prefix that
+	  indicates a pasted string in bracketed paste mode. If we don't
+	  read a valid bracketed paste prefix, push the other characters
+	  back onto the input stack with _rl_unget_char
+	- _rl_bracketed_read_key: handle reading pasted input when bracketed
+	  paste mode is enabled, including reading multibyte characters; push
+	  anything beyond a single byte back onto the input stack where it
+	  can be read by _rl_read_mbstring or subsequent input
+	- _rl_bracketed_read_mbstring: handle reading pasted input in bracketed
+	  paste mode, using _rl_bracketed_read_key to get the pasted text,
+	  then call _rl_read_mbstring to get the rest of any multibyte char
+
+
+lib/readline/vi_mode.c
+	- _rl_vi_callback_getchar: call _rl_bracketed_read_mbstring to handle
+	  bracketed paste mode input. Fixes issue with vi-change-char reported
+	  by <vampyrebat@gmail.com>
+	- rl_vi_domove_getchar: just call _rl_bracketed_read_key and return
+	  the result -- we're not interested in multibyte-character input here
+	  yet
+	- rl_vi_replace: bind BRACK_PASTE_PREF key sequence if bracketed paste
+	  mode has been enabled
+	- _rl_overstrike_bracketed_paste: key binding function for the bracketed
+	  paste prefix key sequence in overwrite mode; reads the pasted text
+	  and uses rl_vi_overstrike to add each character in overwrite mode.
+	  Fixes issue reported by <vampyrebat@gmail.com>
+
+				   7/31
+				   ----
+lib/readline/input.c
+	- _rl_read_mbchar: the first time through the loop (mb_len == 0), call
+	  _rl_bracketed_read_key to process any bracketed paste characters
+
+lib/readline/text.c
+	- _rl_char_search: use _rl_bracketed_read_key in the non-multibyte
+	  character case
+
+lib/readline/misc.c
+	- _rl_arg_dispatch: use _rl_bracketed_read_key in place of rl_read_key
+
+subst.c
+	- list_string: if string_extract_verbatim returns something, just make
+	  a WORD_DESC * and add current_word directly to it, noting that we
+	  don't want to free current_word (free_word = 0)
+	- string_extract_verbatim: if the separator string is the empty
+	  string, don't bother with the loop -- just savestring the string,
+	  update *sindex, and return the copy
+	- read_comsub: make the string we use to save the output from the pipe
+	  512 bytes instead of 128 (same size as the buffer used to read from
+	  the pipe); fewer calls to xrealloc in the worst case
+	- parameter_brace_expand_length: optimize the common case (non-dynamic
+	  scalar variable without `set -u' in effect) and just call MB_STRLEN
+	  on the variable value in that case. From a report from
+	  Alkis Georgopoulos <alkisg@gmail.com>
+
+				   8/13
+				   ----
+execute_cmd.c
+	- execute_subshell_builtin_or_function: call subshell_exit() instead of
+	  sh_exit() or exit() so the exit trap gets run. Fixes issue reported
+	  in https://savannah.gnu.org/support/?109840
+	- replace __P with PARAMS
+
+lib/readline/colors.c
+	- _rl_print_color_indicator: eliminate one use of S_ISLNK.
+	  Report and fix from Christian Biesinger <cbiesinger@google.com>
+
+				   8/22
+				   ----
+variables.c
+	- push_posix_temp_var: change to use bind_variable and modify variables
+	  at the current local scope or create and modify variables at the
+	  global scope, as if a standalone assignment statement had been
+	  executed. This restores some bash-4.4 backwards compatibility with
+	  respect to posix-mode assignment statements preceding special
+	  builtins and shell functions. The bash-5.0 behavior, while perhaps
+	  defensible, caused too many compatibility problems. Originally
+	  prompted by several discussions with Martijn Dekker; the current
+	  incarnation and tests based on a report to Debian BTS from
+	  Thorsten Glaser <tg@mirbsd.de>
+
+				   8/26
+				   ----
+shell.c,bashhist.c
+	- __P -> PARAMS
+
+shell.c
+	- set_option_defaults,reset_option_defaults: before calling
+	  list_minus_o_options at invocation, call set_option_defaults to
+	  set the options that are initialized to -1 to either 1 or 0, as
+	  appropriate; then call reset_option_defaults to set them back to -1
+	  after list_minus_o_options returns
+	- init_interactive: if enable_history_list == -1, set it to 1, then
+	  set remember_on_history to enable_history_list. Fixes bug reported
+	  by Alex Kerzner <alex.j.kerzner@gmail.com>
+	- init_noninteractive: if enable_history_list == -1, set it to 0, let
+	  bash_history_reinit take care of setting remember_on_history
+	- init_interactive_script: if enable_history_list == -1, set it to 1,
+	  then set remember_on_history to enable_history_list
+
+bashhist.c
+	- enable_history_list: initialize to -1 to note when it gets changed
+	  by -o history or +o history at invocation
+
+				   8/28
+				   ----
+lib/readline/terminal.c
+	- TGETENT_SUCCESS, TGETFLAG_SUCCESS: defines to represent successful
+	  returns from tgetent and tgetflag, since HPUX manages to get them
+	  wrong. New patch from Osipov, Michael <michael.osipov@siemens.com>
+	- TGETFLAG: new define, make sure tgetflag returns TGETENT_SUCCESS
+	- _rl_init_terminal_io: use TGETENT_SUCCESS and TGETFLAG
+
+configure.ac
+	- hpux: make sure to define TGETFLAG_BROKEN
+
+				   8/30
+				   ----
+tests
+	- add copyright notices to all scripts longer than 15 lines at the
+	  request of the FSF
+
+				    9/1
+				    ---
+lib/readline/complete.c
+	- _rl_complete_internal: move logic that checks whether the last
+	  completion attempt failed and the current attempt returned a single
+	  match and insert the single completion here. A better implementation
+	  of Richard Stallman's suggestion of 2/23.
+
+				    9/3
+				    ---
+bashline.c
+	- edit_and_execute_command: reset the readahead token after calling
+	  restore_parser_state, in case some call to reset_parser set
+	  token_to_read. Fixes bug reported by null <avalonvales@protonmail.com>
+
+				    9/9
+				    ---
+execute_cmd.c
+	- execute_command_internal: if we're executing a command list
+	  (executing_list != 0), save the old fifo list and close any new
+	  FIFOs that the command opens. Fixes bug reported by
+	  Kamil Cukrowski <kamilcukrowski@gmail.com>
+
+				   9/10
+				   ----
+aclocal.m4,m4/intdiv0.m4
+	- make sure `exit' is used consistently with <stdlib.h> included
+	- make sure `main' isn't declared to implicitly return int
+	- include <ulimit.h> before using ulimit
+	- include <string.h> before testing string functions
+	- fixes from Florian Weimer <fweimer@redhat.com>
+
+configure.ac
+	- setresuid,setresgid: use AC_CHECK_FUNCS instead of AC_CHECK_DECL,
+	  which always fails
+
+shell.c
+	- disable_priv_mode: use HAVE_SETRESUID and HAVE_SETRESGID instead of
+	  the HAVE_DECL variants, which always fail configure tests
+
+m4/intl.m4
+	- gt_INTL_SUBDIR_CORE: add back check for localeconv, removed in
+	  newer gettext releases
+
+				   9/16
+				   ----
+builtins/help.def
+	- help_builtin: make the closing quote printed after the argument list
+	  for a glob pattern argument a translatable string to ease translation
+	  for certain languages. Report from Roland Illig <roland.illig@gmx.de>
+
+builtins/{reserved,complete,exec,getopts}.def
+	- minor typographical fixes from Roland Illig <roland.illig@gmx.de>
+
+siglist.c
+	- include general.h for INT_STRLEN_BOUND
+	- initialize_siglist: use the same string for the strlen and xmalloc
+	  for the message about an unknown signal number; use INT_STRLEN_BOUND
+	  instead of a fixed 10 for the number
+
+builtins/getopts.def,doc/{bash.1,bashref.texi}
+	- getopts: minor changes to the description of the effect of supplying
+	  additional arguments. Report from Roland Illig <roland.illig@gmx.de>
+
+				   9/17
+				   ----
+jobs.[ch]
+	- save_proc_status: external interface to bgp_add, takes care of
+	  blocking and unblocking SIGCHLD
+	- __P -> PARAMS
+
+				   9/18
+				   ----
+jobs.[ch]
+	- procsub_{free,add,search,delete,waitpid,waitall,clear,prune}: new
+	  functions to keep track of the list of active process substitutions
+	  and their statuses. Implementation is currently a singly-linked list
+	  of PROCESS *, so functions that expect a PROCESS * to manipulate
+	  continue to work. Inspired by report from leo.dalecki@ntymail.com
+	- find_pipeline,cleanup_dead_jobs,wait_for_background_pids: call new
+	  procsub_* functions to manage procsub list; don't call the functions
+	  in subst.c any more
+
+subst.c
+	- process_substitute: call procsub_add with the PROCESS * returned
+	  from make_child; let the functions in jobs.c manage the list.
+	  waitchld continues to set the pid field in the fifo list as a hint
+	  that a particular fd or FIFO is no longer used and can be reaped
+	- process_substitute: let the child process clear out any existing
+	  procsub pid list
+	- wait_procsubs: no longer compiled in
+
+sig.c
+	- termsig_handler: replace discard_last_procsub_child with call to
+	  procsub_clear
+
+lib/readline/display.c
+	- init_line_structures: fix a problem which results in references to
+	  uninitialized memory when gdb sets the number of columns to 32767
+	  (their `unlimited'). Modification of change from 5/23. Report and
+	  fix from Andrew Burgess <andrew.burgess@embecosm.com>
+
+				   9/19
+				   ----
+parse.y
+	- xparse_dolparen: after calling parse_string to consume input, make
+	  sure to reset the parser (reset_parser()) before restoring the EOF
+	  token and the parser_state variable. Fixes issue with nested traps
+	  running command substitutions in command lines with command
+	  substitutions reported by Travis Everett <travis.a.everett@gmail.com>
+
+				   9/20
+				   ----
+doc/{bashref.texi,bash.1}
+	- fixed a typo in the example for the =~ operator: the ? should follow
+	  the (a), not precede it. Report from hk <hkadeveloper@gmail.com>
+	- some changes to the text describing regular expression matching for
+	  the =~ operator
+
+				   9/25
+				   ----
+general.c,builtins/shopt.def
+	- posix_glob_backslash: remove references to this variable and the
+	  `posixglob' shell option
+
+doc/{bash.1,bashref.texi}
+	- remove references to the `posixglob' shell option
+
+				   9/26
+				   ----
+{jobs,nojobs}.c
+	- DEFAULT_MAX_CHILD: bump this up to 4096
+	- set_maxchild: set lmaxchild to MAX_CHILD_MAX if getmaxchild returns
+	  -1 without changing errno (assume that sysconf returns -1 meaning
+	  unlimited)
+	- initialize_job_control: call set_maxchild instead of inline code
+	- mark_dead_jobs_as_notified: call set_maxchild to set js.c_childmax
+	  if it hasn't been set yet
+
+				   9/30
+				   ----
+lib/glob/xmbsrtowcs.c
+	- xwcsrtombs: implementation of wcsrtombs from gnulib, modified to
+	  treat invalid wide characters (or wide characters that can't be
+	  converted to multibyte character sequences) as bytes. Should be
+	  used only in unusual circumstances where wcsrtombs fails.
+
+lib/glob/glob.c
+	- wdequote_pathname: if wcsrtombs fails to convert the dequoted wide
+	  character pathname back to a sequence of multibyte characters, call
+	  xwcsrtombs to try to treat the invalid wide characters as bytes --
+	  the call to xdupmbstowcs treats bytes that don't convert to wide
+	  characters as just bytes, which kind of causes this problem in the
+	  first place. Inspired by report from Geoff Kuenning <geoff@cs.hmc.edu>
+
+lib/readline/complete.c
+	- compute_lcd_of_matches: use the case-folding code (which performs
+          character-by-character checking and compares invalid multibyte
+          sequences as bytes) instead of the old case-sensitive code (which
+	  used _rl_compare_chars), converting characters to lowercase as
+	  needed. Fixes bug with invalid sequences in common filename prefixes
+	  reported by Grisha Levit <grishalevit@gmail.com>
+
+				   10/1
+				   ----
+builtins/shopt.def
+	- reset_shopt_options: add in resets for some missing shopt options.
+	  Report and fix from Grisha Levit <grishalevit@gmail.com>
+
+execute_cmd.c
+	- execute_command_internal: make sure a failed attempt to define a
+	  shell function causes the shell to exit if -e is enabled. Report
+	  from Andreas Kusalananda Kähäri <andreas.kahari@abc.se>
+	- execute_command_internal: combine cm_function_def, cm_arith, and
+	  cm_cond cases into one switch case, since the code is virtually
+	  identical across all three
+
+				   10/3
+				   ----
+pathexp.[ch],lib/glob/glob.c,lib/glob/glob_loop.c
+	- remove all references to posix_glob_backslash in preparation for
+	  implementing austin group interpretation #1234
+
+pathexp.c
+	- unquoted_glob_pattern_p: revert to bash-4.4 behavior of returning 1
+	  only if there is an unquoted `*', `?', or bracket expression, as
+	  per austin group interpretation #1234
+
+lib/glob/glob_loop.c
+	- INTERNAL_GLOB_PATTERN_P: revert to bash-4.4 behavior of returning 1
+	  only if there is an unquoted `*', `?', or bracket expression, as
+	  per austin group interpretation #1234
+
+				   10/4
+				   ----
+variables.c
+	- assign_seconds,get_seconds: use the tv_sec value returned from
+	  gettimeofday() instead of time() to get a better approximation of
+	  the number of seconds since the epoch for future calculations.
+	  From a report by Stephane Chazelas <stephane.chazelas@gmail.com>
+
+pathexp.[ch],{bashline,subst}.c
+	- shell_glob_filename: now takes an additional flags argument to pass
+	  to quote_string_for_globbing
+
+				   10/6
+				   ----
+subst.c
+	- glob_expand_word_list: call shell_glob_filename with QGLOB_CTLESC
+	  because quote removal hasn't been performed yet
+
+				   10/7
+				   ----
+pathexp.c
+	- quote_string_for_globbing: if we have an unquoted backslash followed
+	  by a CTLESC-quoted character (not CTLESC-CTLESC), just perform the
+	  usual CTLESC-to-backslash conversion instead of skipping over it.
+	  Fixes issue raised in austin-group discussion about globbing by
+	  Geoff Clare <gwc@opengroup.org> (austin-group issue 1234), though
+	  it's still inherently ambiguous
+
+				   10/8
+				   ----
+include/shmbutil.h
+	- xwcsrtombs: extern declaration, to match other functions in that file
+
+lib/glob/glob.c
+	- wcdequote_pathname: new function, actual backslash quote removal code
+	  from wdequote_pathname; wdequote_pathname calls it
+
+lib/glob/glob.c
+	- {udequote,wcdequote}_pathname: now public void functions
+
+lib/glob/smatch.c
+	- DEQUOTE_PATHNAME: defined appropriately to udequote_pathname or
+	  wcdequote_pathname
+
+lib/glob/sm_loop.c
+	- DEQUOTE_PATHNAME: appropriate extern declaration
+	- BRACKMATCH: call DEQUOTE_PATHNAME to dequote a character class name
+	  in a bracket expression. This is the result of a discussion on the
+	  austin-group mailing list, from Geoff Clare <gwc@opengroup.org> and
+	  Robert Elz <kre@bmunnari.oz.au>
+
+				   10/10
+				   -----
+execute_cmd.[ch]
+	- async_redirect_stdin: now a global function
+
+subst.c
+	- process_substitute: call async_redirect_stdin in the child to keep
+	  it from having stdin connected to the terminal, since it's not a
+	  job control process
+
+				   10/11
+				   -----
+subst.c
+	- process_substitute: in the child process, set interactive = 0, since
+	  an asynchronous process substitution process is not interactive.
+	  Seems to fix issue reported by Grisha Levit <grishalevit@gmail.com>
+
+lib/sh/shmatch.c
+	- sh_regmatch: implement a suggestion from Grisha Levit
+	  <grishalevit@gmail.com> and don't allow nocaseglob to enable case-
+	  insensitive regexp matching. It hasn't been documented that way
+	  in years
+
+				   10/30
+				   -----
+bashhist.c
+	- bash_add_history: fix a couple of problems with adding extra blank
+	  lines to history entries containing here-documents. Fixes bug
+	  reported by Oguz <oguzismailuysal@gmail.com>
+
+lib/sh/shmatch.c
+	- BASH_REMATCH: no longer set to readonly. From a suggestion from
+	  Rocky Bernstein <rocky@gnu.org>
+
+doc/{bash.1,bashref.texi}
+	- BASH_REMATCH: document that it's no longer set to readonly
+
+subst.c
+	- getpattern: since expand_string_for_pat leaves the pattern quoted,
+	  we need to remove quoted nulls before running the string through
+	  string_list (and then quote_string_for_globbing, since QGLOB_CVTNULL
+	  only handles pat[0] == CTLNUL). Fixes bug reported by Oguz
+	  <oguzismailuysal@gmail.com>
+
+				   11/4
+				   ----
+configure.ac,config.h.in
+	- AC_HEADER_MAJOR: look for `major' and `minor' in various header files
+	  and define MAJOR_IN_MAKEDEV or MAJOR_IN_SYSMACROS as appropriate.
+	  From a patch from Eli Schwartz <eschwartz@archlinux.org>
+
+examples/loadables/finfo.c
+	- include <sys/mkdev.h> and <sys/sysmacros.h> as appropriate for
+	  definitions of major/minor
+
+				   11/6
+				   ----
+redir.c
+	- heredoc_expand: if we are expanding the WORD in a here-string, use
+	  expand_assignment_string_to_string so the expansions are consistent
+	  in contexts where word splitting is not performed. From a bug report
+	  by Robin A. Meade <robin.a.meade@gmail.com>
+
+				   11/7
+				   ----
+parse.y
+	- xparse_dolparen: if the command substitution is incomplete or doesn't
+	  end in `)', print an error message instead of allowing EOS to
+	  terminate the comsub. From a bug report from
+	  Oguz <oguzismailuysal@gmail.com>
+
+				   11/11
+				   -----
+lib/sh/unicode.c
+	- u32toutf8: fix a typo that assigned the wrong value to the first
+	  byte of a six-byte UTF-8 character. Report and fix from
+	  István Pásztor <pasztorpisti@gmail.com>
+
+				   11/15
+				   -----
+doc/bash.1,lib/readline/doc/{history.3,hsuser.texi}
+	- quick substitution: make it clear that ^s1^s2^ is equivalent to
+	  !!:s^s1^s2^, since that's the internal transformation we perform.
+	  Reported by Jim Monte <jim.monte01@gmail.com>
+	- note that the `q' and `x' modifiers are mutually exclusive; last
+	  one wins. Reported by Jim Monte <jim.monte01@gmail.com>
+	- note that the `G' modifier can work with `&' as well as `s'.
+	  Reported by Jim Monte <jim.monte01@gmail.com>
+	- note that a word designator of `-' is equivalent to `0-'.
+	  Reported by Jim Monte <jim.monte01@gmail.com>
+	- note that a missing `new' in a substitution modifier causes
+	  instances of `old' to be deleted
+
+lib/readline/histexpand.c
+	- history_expand_internal: make multiple :p modifiers work to suppress
+	  execution. Reported by Jim Monte <jim.monte01@gmail.com>
+	- get_history_word_specifier: fix so a `^' word designator works as
+	  the second part of a range.
+	  Reported by Jim Monte <jim.monte01@gmail.com>
+	- hist_error: make sure we don't blindly copy a null character into
+	  the error string (e.g., if there is a missing word designator
+	  following `:'). Reported by Jim Monte <jim.monte01@gmail.com>
+	- get_history_event: if the history event specifier (!) is followed
+	  immediately by a `-' and a non-digit (e.g. !-a), make sure the - is
+	  treated as part of a search string instead of making it an offset of
+	  0. Reported by Jim Monte <jim.monte01@gmail.com>
+
+				   11/19
+				   -----
+lib/readline/{colors,complete,histfile,input}.c,support/shobj-conf
+	- fixes to make readline compile on the latest HPE Nonstop (Tandem)
+	  releases. From Randall S. Becker <rsbecker@nexbridge.com>
+
+subst.c
+	- pat_subst: if we have a null match, make sure we advance by one
+	  character, not one byte. Bug reported by Chris Carlen
+	  <crobc@sbcglobal.net>
+
+				   11/22
+				   -----
+jobs.[ch],nojobs.c,builtins/jobs.def
+	- get_job_by_pid: now takes a PROCESS ** third argument; if non-null,
+	  it gets a pointer to the PROCESS struct corresponding to the PID
+	  argument. A convenience, not used by any caller yet
+
+builtins/wait.def
+	- interrupt_immediately: remove any uses, no longer used anywheren
+
+variables.c
+	- check_unbind_variable: return -2 if the variable name is readonly
+	  (change) or non-unsettable (new) to differentiate the return value
+	  from -1 from makunbound (which means variable not found)
+
+builtins/common.[ch]
+	- builtin_unbind_variable: identical to check_unbind_variable but calls
+	  builtin_error; for use by builtin commands
+
+buitins/wait.def
+	- wait_builtin: now has -p VARNAME option, which takes the pid
+	  returned by `wait -n' or wait without arguments and assigns it to
+	  VARNAME, unsetting VARNAME first. Requested by Robert Elz
+	  <kre@bmunnari.oz.au> after a similar feature in netbsd sh (not
+	  completely compatible yet)
+
+doc/{bash.1,bashref.texi}
+	- wait: document new -p option
+
+				   11/25
+				   -----
+lib/readline/display.c
+	- rl_redisplay: auto-set horizontal scrolling if the terminal has
+	  only one line; disable it if we auto-set it if the terminal grows
+	  to more than one line. Fix from Sören Tempel
+	  <soeren@soeren-tempel.net>
+
+lib/readline/doc/{readline.3,rluser.texi},doc/bash.1
+	- horizontal-scroll-mode: document auto-setting behavior
+
+builtins/set.def
+	- set_posix_mode: make setting posix mode when it's already set, or
+	  unsetting it when it's not set, a no-op. Inspired by a report
+	  from Ulrich Mueller <ulm@gentoo.org>
+
+				   11/26
+				   -----
+doc/{bash.1,bashref.texi}
+	- functions: clarify that when in default mode, function names are not
+	  limited to shell identifiers.
+	  Suggested by Reuti <reuti@staff.uni-marburg.de>
+
+				   11/27
+				   -----
+lib/readline/display.c
+	- _rl_optimize_redisplay: tell the redisplay routines to not worry
+	  about calculating differences between the lines and just draw the
+	  new one. Right now, it just sets the _rl_quick_redisplay flag
+	- rl_redisplay: if _rl_quick_redisplay is set, just draw NEW onto
+	  the screen at column 0 with a dumb update and clear the rest of
+	  the line. Intended to be used when the caller knows the new line is
+	  sufficiently different from the old one (e.g., when drawing the
+	  i-search prompt for the first time) that it doesn't pay off to do
+	  the calculations. As a side effect, fixes the bug reported by
+	  ÐлекÑей Шилин <rootlexx@mail.ru>
+
+lib/readline/isearch.c
+	- rl_display_search: if there isn't a search string, assume this is
+	  the first time this is called and call _rl_optimize_redisplay to
+	  give the redisplay code a hint
+
+				   12/2
+				   ----
+builtins/wait.def
+	- wait_builtin: allow argument to -p to be a  valid array subscript
+
+				   12/3
+				   ----
+lib/readline/isearch.c
+	- _rl_isearch_fini: add call to _rl_optimize_redisplay because we are
+	  switching the prompt back again and it's safer to redraw everything
+	  (even though part of the line is the same) to deal with differences
+	  in the prompt strings. Fixes additional problem reported by
+	  ÐлекÑей Шилин <rootlexx@mail.ru>
+
+lib/readline/display.c
+	- update_line: quick redisplay no longer sets cpos_adjusted before
+	  the dumb update
+	- update_line: adjust _rl_last_c_pos in the case of a dumb update if we
+	  are redrawing the prompt that includes invisible characters, since
+	  _rl_col_width does not. We adjust by the count of invisible chars in
+	  the first line of the prompt
+	- update_line: make sure to clear the rest of the line if it looks like
+	  the number of visible characters on the new line is less than the
+	  number of visible characters on the current line; the old calculation
+	  does that just for the number of bytes (which is also useful)
+
+				   12/4
+				   ----
+lib/readline/display.c
+	- rl_redisplay: if we are changing from one line to multiple lines,
+	  don't try quick redisplay
+	- update_line: changes to quick redisplay to take advantage of knowing
+	  the physical length of the prompt to avoid having to compute column
+	  widths of the prompt string again; moved code to call clear screen
+	  to the quick update section; no longer performs `goto dumb_update'
+	- update_line: try to take advantage of prompt_physical_chars when we
+	  know we have written the prompt string (several places) to set
+	  _rl_last_c_pos and calculate column widths
+	- update_line: if the spot where the old and new lines are the same is
+	  before the end of the prompt string, adjust NLS and OLS so we write
+	  the entire prompt string (as long as it's all on one line) and can
+	  take advantage of already knowing prompt_physical_chars so we don't
+	  have to compute column widths
+	- update_line: when copying chars from first diff to last match, adjust
+	  _rl_last_c_pos by prompt_invis_chars_first_line, not wrap offset,
+	  since we are on the first line, and only do this if we inserted more
+	  bytes than wrap_offset (old code checked _rl_last_c_pos, which is
+	  wrong in the presence of multibyte characters)
+
+				   12/5
+				   ----
+lib/readline/display.c
+	- ADJUST_CPOS: define macro and use it in places where _rl_last_c_pos
+	  is changed
+
+				   12/12
+				   -----
+lib/readline/isearch.c
+	- _rl_isearch_dispatch: check for multibyte characters mapped to one
+	  of the editing functions we treat specially to modify the search
+	  string
+
+				   12/13
+				   -----
+support/shobj-conf
+	- FreeBSD and Dragonfly are ELF-only and can use the same code as
+	  Linux, so add those to the linux stanza and remove the old FreeBSD
+	  version-specific sections. Report and fix from Baptiste Daroussin
+	  <bapt@FreeBSD.org>
+
+bashline.[ch]
+	- bash_execute_unix_command: no longer static, available for other
+	  parts of the shell to use
+
+bashline.c
+	- unbind_unix_command: take a key sequence as an argument, and unbind
+	  it in the appropriate unix command keymap
+
+builtins/bind.def
+	- unbind_keyseq: if we are unbinding a key sequence bound to
+	  bash_execute_unix_command, which means it was added by `bind -x',
+	  call unbind_unix_command() to remove it from the appropriate unix
+	  command keymap. Fixes issue originally raised by
+	  Koichi Murase <myoga.murase@gmail.com> and recently by
+	  Å imon Let <simon.a.let@gmail.com>
+	- bind_builtin: check the number of bindings to bash_execute_unix_command
+	  before and after a call to rl_parse_and_bind and if there are fewer
+	  after binding, we know that the bind has re-bound one of the key
+	  sequences that was bound to execute a shell command. We unbind any
+	  key sequences from the list before the call to rl_parse_and_bind that
+	  don't appear in the list after the call using unbind_unix_command
+
+				   12/19
+				   -----
+include/posixstat.h
+	- added some definitions for MinGW. Report and patch from
+	  Eli Zaretskii <eliz@gnu.org>
+
+				   12/20
+				   -----
+lib/readline/display.c
+	- update_line: when wrapping lines containing multibyte characters at
+	  the wrap point, and the number of screen positions consumed by the
+	  first character on the new line isn't the same as the old line,
+	  make sure we set OE before the `goto dumb_update;' since clearing
+	  the rest of the line may use it. Tentative fix for bug reported by
+	  Kirill Chibisov <wchibisovkirill@gmail.com>
+
+lib/readline/signals.c
+	- _rl_signal_handler: set RL_STATE_SIGHANDLER around SIGWINCH code,
+	  like _rl_handle_signal does
+
+				   12/26
+				   -----
+lib/sh/stringvec.c
+	- strvec_posixcmp: new function that conforms to posix requirement for
+	  sorting globs: perform a bytewise comparison if the two strings
+	  collate equally. Posix interp 963 and 1070
+	- strvec_sort: take a new flags argument, if non-zero use the posix
+	  string comparison function
+
+pathexp.c
+	- shell_glob_filename: call strvec_sort with the flag value to be
+	  posix conformant
+
+lib/sh/stringlist.c
+	- strvec_sort: change callers
+
+				   12/29
+				   -----
+sig.c
+	- throw_to_top_level: set running_trap to 0 after calling run_trap_cleanup.
+	  This avoids spurious (in non-release versions) warnings from
+	  run_pending_traps the next time a trap handler for that signal
+	  runs. Bug report from Martijn Dekker <martijn@inlv.org>
+
+				 1/14/2020
+				 ---------
+bashline.c
+	- find_cmd_start: don't treat the open brace in brace expansion as a
+	  command start character; only treat open brace specially if it can
+	  be a reserved word. Fixes bug reported back in October, 2019 in
+	  https://savannah.gnu.org/support/index.php?110063
+
+				   1/15
+				   ----
+lib/readline/readline.c
+	- _rl_dispatch_subseq,_rl_subseq_result: if we push back a character
+	  with _rl_unget_char or otherwise go back up the chain without a
+	  sequence match, make sure we back up in rl_executing_keyseq.
+	  Report and fix from Koichi Murase <myoga.murase@gmail.com>
+
+builtins/bind.def
+	- unbind_keyseq: if we unbind something that ends up pointing to a
+	  shadow keymap, restore the ANYOTHERKEY binding that we used when
+	  binding it.
+	  Report and fix from Koichi Murase <myoga.murase@gmail.com>
+
+bashline.c
+	- bash_execute_unix_command: if we walked cmd_xmap for rl_executing_keyseq
+	  and ended up pointing to a keymap (type == ISKMAP) we want the
+	  binding for ANYOTHERKEY instead.
+	  Report and fix from Koichi Murase <myoga.murase@gmail.com>
+
+lib/readline/bind.c
+	- rl_bind_key: if we're trying to bind a key sequence containing '\0'
+	  using the old-style binding syntax (C-SPC), make sure we quote the
+	  NULL so it will make it through rl_translate_keyseq().
+	  Report and fix from Koichi Murase <myoga.murase@gmail.com>
+	- rl_bind_key: if we're overwriting a binding for a macro, make sure to
+	  free the old macro value.
+	  Report and fix from Koichi Murase <myoga.murase@gmail.com>
+	- rl_generic_bind: if we're overwriting a macro saved to ANYOTHERKEY in
+	  a shadow keymap created by rl_generic_bind, make sure to free the
+	  macro data.
+	  Report and fix from Koichi Murase <myoga.murase@gmail.com>
+
+trap.c
+	- run_pending_traps: save and restore the value of running_trap around
+	  cycle through pending signals so recursive trap handler calls don't
+	  set running_trap to 0
+	- _run_trap_internal: allow some signals the shell treats specially
+	  (e.g., SIGINT) to run recursive handlers
+	- _run_trap_internal: don't turn off SIG_INPROGRESS flag if it was on
+	  for this signal when _run_trap_internal was called
+	- _run_trap_internal: save and restore the value of running_trap around
+	  running the trap handler, except for SIGCHLD. Fixes bug reported by
+	  Martijn Dekker <martijn@inlv.org>
+
+				   1/16
+				   ----
+general.c
+	- posix_initialize: if turning posix mode off, restore settings from
+	  any saved set, if one exists, instead of setting a default environment
+
+				   1/17
+				   ----
+parse.y,subst.c
+	- process_substitution: now available in POSIX mode. Most recently
+	  requested by Martijn Dekker <martijn@inlv.org>; requested several
+	  times in the past
+
+doc/bashref.texi
+	- posix mode: remove restriction that posix mode is not available
+
+lib/readline/vi_mode.c
+	- rl_domove_motion_callback: make sure to extend rl_line_buffer so it
+	  can hold the dummy blank character we're appending. From a fuzzing
+	  report by Tillmann Osswald <tosswald@ernw.de>
+	- vi_yank_dispatch: after we do an undo, make sure to fix point to be
+	  less than the (new) rl_end
+
+lib/readline/text.c
+	- rl_forward_word: make sure that MB_NEXTCHAR doesn't go past rl_end on
+	  invalid multibyte sequences
+
+				   1/18
+				   ----
+test.c
+	- for the `-v' operator, use a clever trick from Martijn Dekker and
+	  just test whether N is between 0 and $#.
+
+				   1/21
+				   ----
+lib/readline/text.c
+	- rl_change_case: fix argument to rl_extend_line_buffer; make sure to
+	  reset s and e after call in case rl_line_buffer was reallocated
+
+lib/readline/vi_mode.c
+	- _rl_vi_save_replace: if start ends up being less than zero, make
+	  sure we don't read before the start of rl_line_buffer
+	- rl_vi_overstrike_kill_line,rl_vi_overstrike_kill_word: replacement
+	  functions for ^U and ^W in vi overstrike mode, to keep right value
+	  for vi_replace_count.
+	- rl_vi_overstrike_yank: similar for ^Y and rl_yank
+
+				   1/22
+				   ----
+lib/readline/display.c
+	- update_line: if we're trying to wrap lines on an autowrap terminal,
+	  punt and do a dumb update if the number of bytes in the first char
+	  on the new line is greater than the number of bytes in the first char
+	  of the old line. There's no guarantee we'll be able to extend the
+	  old line buffer enough to accommodate the new bytes
+	- update_line: try to avoid some operations when wrapping lines if the
+	  number of bytes in the first characters of the old and new lines is
+	  the same
+	- update_line: when updating vis_lbreaks after fixing up the lines when
+	  wrapping, make sure we don't exceed an index of _rl_vis_botlin when
+	  updating the line break offsets
+
+lib/readline/text.c
+	- rl_delete_text: if deleting text leaves the mark past rl_end, adjust
+	  it to rl_end
+
+lib/readline/vi_mode.c
+	- _rl_vi_goto_mark: make sure to call _rl_fix_point after setting
+	  rl_point to rl_mark
+
+				   1/23
+				   ----
+lib/readline/kill.c
+	- rl_kill_region,region_kill_internal: call _rl_fix_point
+
+lib/readline/text.c,lib/readline/rlprivate.h
+	- _rl_fix_mark: new function to clamp rl_mark between 0 and rl_end
+
+				   1/24
+				   ----
+lib/readline/bind.c
+	- rl_translate_keyseq: rework how key sequences are translated with
+	  the intent of normalizing backslash treatment. Since the current
+	  behavior of, e.g., \C-\\, is inconsistent, this change chooses to
+	  effectively treat and display \\ as \\ instead of \C-\. This is not
+	  completely backwards compatible, but it seems like the most reasonable
+	  choice. This allows things like \M-\a but is not compatible with
+	  pre-bash-4.4 (readline 7.0) handling of \C-\, which is now treated
+	  like \C-\0. If that proves to be a problem, we can add code to
+	  understand \C-\ as equivalent to \C-\\. Since attempting to bind
+	  "\C-\" has generated an error for a long time, it doesn't seem like
+	  it will be too much of a problem.
+	  Fixes from Koichi Murase <myoga.murase@gmail.com>
+	- rl_invoking_keyseqs_in_map: make sure to consistently output
+	  backslash as `\\' instead of producing `\C-\'
+	  Fixes from Koichi Murase <myoga.murase@gmail.com>
+
+				   1/29
+				   ----
+bashline.c
+	- readline_get_char_offset: translate a readline buffer offset
+	  (rl_point, rl_mark, rl_end) into a number of (possibly multibyte)
+	  characters
+	- readline_set_char_offset: translate a number of (possibly multibyte)
+	  characters into a buffer offset in rl_line_buffer. Uses a private
+	  readline function to do it, which is bad
+	- bash_execute_unix_command: use readline_{get,set}_char_offset to
+	  translate the rl_point to a character offset
+	- bash_execute_unix_command: bind READLINE_MARK variable, exposing
+	  the value of rl_mark to `bind -x' functions
+
+doc/{bash.1,bashref.texi}
+	- READLINE_MARK: document new variable set by the shell
+
+				   1/31
+				   ----
+examples/loadables/accept.c
+	- accept: new loadable builtin that will accept a TCP connection on a
+	  specified port. Inspired by Stan Marsh <gazelle@xmission.com>
+
+				    2/1
+				    ---
+lib/readline/histfile.c
+	- history_do_write,history_truncate_file: translate the return value rv
+	  to errno when histfile_restore returns -1 (e.g., if rename() fails).
+	  Report and fix from A <auroralanes@protonmail.ch>
+
+				    2/3
+				    ---
+lib/sh/ufuncs.c
+	- fsleep: if pselect/select is interrupted by a signal, return -1 and
+	  let the caller deal with it
+
+lib/sh/timeval.c
+	- multimeval: new function, multiply a timeval by a constant integer
+	- divtimeval: new function, divide a timeval by a constant integer
+
+lib/sh/uconvert.c
+	- uconvert: new additional argument: EP. If non-null, it gets the
+	  address of the first non-digit that ends conversion (like strtod);
+	  we try to do as much of the conversion as possible if EP is set so
+	  the caller can clean up
+
+				    2/4
+				    ---
+examples/loadables/mkfifo.c
+	- mkfifo: new loadable builtin
+
+				    2/6
+				    ---
+variables.c
+	- make_local_variable: make sure local variables that have the same
+	  names as variables found in the temporary environment are marked as
+	  local. From Grisha Levit <grishalevit@gmail.com> back in 12/2018
+
+				    2/7
+				    ---
+sig.[ch]
+	- restore_sigmask: function to restore top-level signal mask using
+	  sigprocmask
+
+{sig,eval,jobs,nojobs}.c
+	- replace calls to sigprocmask with restore_sigmask(); remove extern
+	  declarations of top_level_mask
+
+sig.c
+	- initialize_shell_signals: if SIGCHLD is blocked at shell startup,
+	  not only remove it from top_level_mask but make sure it's unblocked
+
+execute_cmd.c
+	- execute_pipeline: if lastpipe is enabled and we're executing the
+	  rightmost pipeline element in the current shell, make sure to unblock
+	  SIGCHLD before calling execute_command, in case `return' or `exec'
+	  is run and that call doesn't return. From a report by
+	  Harald van Dijk <harald@gigawatt.nl> following up to a report
+	  by Martijn Dekker <martijn@inlv.org>
+
+				   2/10
+				   ----
+builtins/trap.def
+	- trap_builtin: in posix mode, when trap is run with -p, show
+	  the disposition of all signals, even those that are still in the
+	  default state, including signals that were ignored when the shell
+	  starts up and haven't been reset. Don't do it in default mode.
+	  From an austin-group discussion back in April, 2019 (interp 1211)
+
+findcmd.c
+	- search_for_command: don't add commands without the execute bit set
+	  to the command hash table. From https://savannah.gnu.org/patch/?9789
+	  contributed by michaeljs1990
+
+				   2/11
+				   ----
+expr.c
+	- strlong: require `base#' to be followed by an integer constant;
+	  otherwise throw an error. From a report from Jeremy Townshend
+	  <jeremy.townshend@gmail.com> back in June, 2019
+
+test.c
+	- unary_test: allow -v N to test whether or not positional parameter
+	  N is set. Most recently suggested by Peng Yu <pengyu.ut@gmail.com>
+	  and Martijn Dekker <martijn@inlv.org>
+
+builtins/getopts.def
+	- dogetopts: use number_of_args() to compute the number of positional
+	  parameters
+
+{findcmd,variables,subst,trap,sig}.h,builtins/common.h
+	- __P --> PARAMS
+
+builtins/shift.def,builtins/common.c
+	- shift_builtin: moved code that modifies dollar_vars and rest_of_args
+	  to common.c:shift_args(int times), part of move to localize changes
+	  to positional parameters
+
+builtins/common.c,variables.c
+	- posparam_count: keep a running count of the number of posititional
+	  parameters when dollar_vars and rest_of_args are set
+
+				   2/12
+				   ----
+subst.c
+	- number_of_args: just return posparam_count
+
+builtins/shift.def
+	- shift_builtin: if asked to clear the positional parameters with
+	  something like `shift $#', just call clear_dollar_vars instead of
+	  iterating through them, unsetting them one by one
+
+subst.[ch],builtins/common.[ch]
+	- number_of_args: moved to builtins/common.c
+
+				   2/14
+				   ----
+subst.c
+	- clear_fifo_list: when using named pipes, clear out the FIFO list
+	  without unlinking anything and set NFIFO to 0
+
+execute_cmd.c
+	- execute_disk_command: in the child, clear out the FIFO list, since
+	  we haven't created any FIFOs yet
+	- execute_in_subshell: clear out the FIFO list, since we haven't
+	  created any FIFOs yet
+
+parse.y
+	- special_case_tokens: allow `time -- command'
+
+				   2/21
+				   ----
+subst.c
+	- get_var_and_type: if an unset variable (not an array) is supplied
+	  with the `[@]' subscript, don't return "". Fix to bug reported by
+	  Arfrever Frehtes Taifersar Arahesis <arfrever.fta@gmail.com>;
+	  original bug introduced 7/29/2018
+	- array_transform: take a STARSUB argument instead of VARNAME, since
+	  we've already computed what kind of index the array reference uses
+	  in get_var_and_type, and passing VARNAME to figure out the index
+	  type doesn't do the right thing when we're using indirect variable
+	  expansion. Fixes bug reported by 
+	  Arfrever Frehtes Taifersar Arahesis <arfrever.fta@gmail.com>
+	- array_remove_pattern: take the same new STARSUB argument for the
+	  same reason
+	- parameter_brace_transform,parameter_brace_remove_pattern: change
+	  callers to pass STARSUB instead of VARNAME
+
+				   2/22
+				   ----
+execute_cmd.c
+	- fix_assignment_words: if an assignment is supplied to a builtin that
+	  creates or modifies local variables while a function is executing,
+	  set the W_FORCELOCAL flag for that word in addition to any of the
+	  various assignment flags
+
+subst.c
+	- shell_expand_word_list: while processing a list of assignments that
+	  are arguments to a builtin that creates or modifies local variables,
+	  if make_internal_declare fails while attempting to create the local
+	  variable (or give it attributes), skip attempting the assignment but
+	  otherwise do not make this a fatal error. This results in two error
+	  messages: one to create the variable or modify its attributes, and
+	  one while attempting to assign the value, but the errors to not
+	  cause the function to return immediately. Fixes inconsistency
+	  reported by Arfrever Frehtes Taifersar Arahesis <arfrever.fta@gmail.com>
+	  
+
+				   2/23
+				   ----
+trap.c
+	- first_pending_trap: generalize into first_pending_trap and
+	  next_pending_trap
+
+wait.def
+	- wait_builtin: close up the trapped-signal-arrives hole a little more
+	  by looking for a signal that arrived between the last check for
+	  pending traps and setting wait_intr_flag and behaving as if it
+	  arrived while wait was executing. Use first_pending_trap and
+	  next_pending_trap to find a pending trap that is not SIGCHLD
+
+trap.c
+	- trap_handler: longjmp to wait_intr_buf unconditionally if
+	  wait_intr_flag is set; don't bother with interrupt_immediately any
+	  more
+
+variables.c
+	- all_local_variables: now takes an arg saying whether to restrict
+	  return value to visible variables or return all local variables,
+	  even those that are unset (the new default)
+	- visible_variable_in_context: new function, restricts return values
+	  to set local variables in the current context; variable_in_context
+	  now returns all local variables in the current context, even the
+	  unset ones
+
+variables.h
+	- all_local_variables: change extern function declaration
+
+builtins/setattr.def
+	- show_local_var_attributes: show all local variables at the current
+	  variable context, including unset ones, and their attributes
+	- show_localname_attributes: show attributes for NAME as long as NAME
+	  resolves to a local variable at the current variable context, even
+	  if NAME is unset
+
+builtins/common.h
+	- show_local_var_attributes, show_localname_attributes: new extern
+	  declarations
+
+builtins/declare.def
+	- declare_internal: allow `-p' option for `local' builtin
+	- declare_internal: if `local' is supplied without options, or with
+	  the `-p' option, but no variable name arguments, display all local
+	  variables at the current variable context by calling
+	  show_local_var_attributes
+	- declare_internal: if `local -p' is supplied with variable name
+	  arguments, call show_localname_attributes to display the attributes
+	  for that name if it resolves to a local variable at the current
+	  variable context. Fixes issue reported by
+	  pepa65 <solusos@passchier.net>
+
+subst.c
+	- array_var_assignment: if VAR is unset, print the declare command
+	  without the assignment statement, just with the attributes
+	- array_transform: special-case the 'a' attribute and return the
+	  attribute string even if the array variable is unset.  Feature request
+	  from Arfrever Frehtes Taifersar Arahesis <arfrever.fta@gmail.com>
+	- parameter_brace_transform: if asked to display the attributes and
+	  value ('A') of an unset variable, make sure we pass the variable, if
+	  it exists with attributes but without a value, to string_transform
+	- string_transform: if we don't have a value but the operator is 'A',
+	  pass the variable through to string_var_assignment
+	- string_var_assignment: if we have an unset variable with attributes,
+	  return a declare command that just sets the attributes. Feature request
+	  from Arfrever Frehtes Taifersar Arahesis <arfrever.fta@gmail.com>
+
+				   2/24
+				   ----
+locale.c
+	- mblen: don't try to use unless HANDLE_MULITBYTE is defined. From
+	  https://savannah.gnu.org/support/?110200
+	- set_default_locale: if HAVE_SETLOCALE isn't defined, set the default
+	  locale to "C"
+
+				   2/25
+				   ----
+general.c
+	- interrupt_immediately: remove all references to this that are
+	  already commented out
+
+				    3/2
+				    ---
+variables.c
+	- push_var_context,push_posix_tempvar_internal: assignment statements
+	  preceding shell functions no longer persist after the function
+	  completes in posix mode. POSIX interp #654, was in P1003.1-2017
+	- push_posix_temp_var: variable assignments preceding special builtins
+	  now act as if an assignment statement had been executed in posix mode
+	  (the Posix `current execution environment') instead of unconditionally
+	  creating a global variable
+
+trap.c
+	- clear_pending_traps: new function, just clears the pending traps flag
+	  for all signals
+
+				    3/6
+				    ---
+execute_cmd.c
+	- execute_in_subshell: check for interrupts and terminating signals
+	  before resetting the terminating signal handlers, and clear all
+	  pending traps -- they're not pending for us and we should not run a
+	  trap handler for them
+	- execute_in_subshell: enable bash-5.1 change from 11/29/2018 that
+	  resets the signal-in-progress flag if we're running a command in
+	  a subshell, since we're not running the trap command (we are the
+	  trap command)
+
+				   3/10
+				   ----
+subst.c
+	- parameter_brace_expand: if we assign the empty string to a variable
+	  using the [:]= expansion in a quoted expansion, make sure we note
+	  we are returning a quoted null string to the caller by setting
+	  W_HASQUOTEDNULL. Fixes bug reported by Martin Castillo
+	  <castilma@uni-bremen.de>
+
+				   3/17
+				   ----
+lib/readline/histfile.c
+	- history_truncate_file: only chown the file if we really need to. From
+	  alex@lisas.de via https://savannah.gnu.org/support/?110207
+
+lib/readline/bind.c
+	- rl_unbind_function_in_map: since we are looking for functions, not
+	  key sequences, descend into keymaps attached to the keymap passed
+	  as an argument. From a report from lockywolf@gmail.com back on 2/27,
+	  TENTATIVE CHANGE
+
+variables.h
+	- MKLOC_ARRAYOK,MKLOC_ASSOCOK: new flags values for
+	  make_local_{array,assoc}_variable so we can avoid hard-coded values
+	  of 1 and make it possible to eventually pass in additional flags
+
+builtins/declare.def
+	- declare_internal: make_local_array_variable: pass MKLOC_ASSOCOK
+	- declare_internal: make_local_assoc_variable: pass MKLOC_ARRAYOK
+
+variables.c
+	- make_local_{array,assoc}_variable: understand new flags, pass
+	  MKLOC_INHERIT to make_local_variable if it appears in the flags
+	  argument
+
+builtins/declare.def
+	- declare_internal: add a new -I option for local and declare that
+	  inherits attributes and value from a variable with the same name
+	  at a previous scope. Inspired by netbsd sh
+	- if -I option is supplied, pass MKLOC_INHERIT to make_local_variable
+	  and its array counterparts make_local_{array,assoc}_variable
+
+subst.c
+	- shell_expand_word_list: pass -I to declare if constructing a declare
+	  command with make_local_declare, meaning we have an array or assoc
+	  compound assignment. (Slighty unsatisfactory, but ok for now) Fix
+	  for bug report from Kevin Locke <kevin@kevinlocke.name>,
+	  https://savannah.gnu.org/support/index.php?109669
+
+				   3/18
+				   ----
+examples/loadables/basename.c
+	- basename_builtin: handle -- option without crashing. Report by Peng Yu
+	  <pengyu.ut@gmail.com>
+
+jobs.c
+	- notify_of_job_status: if in posix-mode shell is started with -c,
+	  jobs should print the status of completed jobs. From a report by
+	  Robert Elz <kre@munnari.oz.au> back in 12/18
+
+				   3/19
+				   ----
+variables.c
+	- assign_in_env: if we're assigning POSIXLY_CORRECT or POSIX_PEDANTIC
+	  in the temporary environment, save the values of the options
+	  affected by posix mode so we can restore them when we restore the
+	  old value of the variable after the command executes. Suggested by
+	  Martijn Dekker <martijn@inlv.org>
+
+				   3/20
+				   ----
+syntax.h
+	- slashify_in_here_document: add `"' to this list, since POSIX says
+	  that backslashes in here documents behave like backslashes in
+	  double quotes, and backslash can quote a double quote in a double-
+	  quoted string. This means that given P=A,
+
+		cat <<EOF
+		${P+\"$P\"}
+		EOF
+
+		and
+
+		echo "${P+\"$P\"}"
+
+	  should output the same thing. From a report from Dan Jacobson
+	  <jidanni@jidanni.org> back in 1/2019.
+
+				   3/23
+				   ----
+subst.c
+	- string_transform: add `U' (convert to uppercase), `u' (convert
+	  first character to uppercase), and `L' (convert to lowercase)
+	  transformations. Inspired by a discussion with Phil Smith
+	  <phil@philsmith.com> back in May, 2019
+	- parameter_brace_transform: make sure `u', `U', and `L' are valid
+	  transform operators
+
+doc/{bash.1,bashref.texi}
+	- parameter transformation: document new `U', `u', and `L' operators
+
+eval.c
+	- execute_prompt_command: if an array variable PROMPT_COMMANDS exists,
+	  prefer it to PROMPT_COMMAND and execute all of the commands contained
+	  as array elements in index order. From a proposal by Daniel
+	  Colascione <dancol@google.com> back in 1/2018
+	- execute_array_command: function for array_walk to use when executing
+	  commands in PROMPT_COMMANDS
+
+doc/{bash.1,bashref.texi}
+	- PROMPT_COMMANDS: new array variable
+
+				   3/24
+				   ----
+builtins/ulimit.def
+	- new -R option, for RLIMIT_RTTIME (max time a real-time process can
+	  run without blocking). Patch from Maciej Wolny
+	  <maciekwolny123@gmail.com> back in 7/2017
+
+doc/{bash.1,bashref.texi}
+	- ulimit: document new -R option
+
+lib/readline/{display.c,rlprivate.h}
+	- _rl_clear_screen: now takes an argument saying whether to attempt to
+	  clear the terminal scrollback buffer if the right termcap capability
+	  exists
+
+lib/readline/{text.c,readline.h}
+	- rl_clear_display: new bindable command that clears the screen and
+	  scrollback buffer
+
+lib/readline/funmap.c
+	- clear-display: new bindable command name
+
+lib/readline/emacs_keymap.c
+	- emacs mode M-C-l now bound to clear-display
+
+doc/bash.1,lib/readline/doc/{readline.3,rluser.texi}
+	- clear-display: document new function and default emacs mode binding
+
+arrayfunc.c
+	- assign_assoc_from_kvlist: allow compound assignments to associative
+	  arrays that do not contain words of the form `[key]=value', assume
+	  such lists are of the form (key1 value1 key2 value2). A missing or
+	  empty key is an error; a missing value is treated as NULL. You
+	  cannot mix the two forms. Inspired by a suggestion from Sebastian
+	  Gniazdowski <sgniazdowski@gmail.com> back in 7/2019
+
+doc/{bash.1,bashref.texi}
+	- documented new associative array assignment syntax
+
+assoc.[ch]
+	- assoc_to_kvpair: new function that returns a string with quoted
+	  key/value pairs from given associative array
+
+array.[ch]
+	- array_to_kvpair: new function that returns a string with quoted
+	  key/value pairs from given indexed array (for completeness)
+
+subst.c
+	- parameter_brace_transform: new operator `K': produces the (possibly
+	  quoted) value of a variable, except for arrays, where it expands to
+	  indexed or associative array assignments in key/value pair form
+	- string_transform,parameter_list_transform: expand `K' to (possibly
+	  quoted) values
+	- array_var_assignment: take a new fourth argument saying which kind
+	  of assoc assignment statement to produce; calls array_to_kvpair or
+	  assoc_to_kvpair as appropriate and just returns that value if
+	  necessary without creating a declare command
+	- array_transform: if the operator is `K', call array_var_assignment
+	  with new argument that will produce a list of key/value pairs
+
+doc/{bash.1,bashref.texi}
+	- document new 'K' parameter transformation operator
+
+				   3/25
+				   ----
+doc/bash.1,lib/readline/doc/{history.3,readline.3}
+	- some text and formatting cleanups from Bjarni Ingi Gislason
+	  <bjarniig@rhi.hi.is>
+
+bashhist.c
+	- SYSLOG_MAXLEN: increase to 1024, since that seems to be what most
+	  syslog daemons handle
+	- bash_syslog_history: if the line is longer than SYSLOG_MAXLEN minus
+	  the header length, log it in multiple message with a sequence number
+	  instead of truncating. Inspired by a report from
+	  <sunhuilin@unionpay.com> back in 7/2018
+
+lib/readline/text.c
+	- rl_activate_mark,rl_deactivate_mark,rl_mark_is_active_p,
+	  rl_keep_mark_active: new functions to manage an active region. We
+	  don't do anything with an active region yet. Part of a large patch
+	  for active regions from Daniel Colascione <dancol@google.com>
+	  originally back in 3/2018
+	- rl_clear_screen: call rl_keep_mark_active to keep the region active
+	  across the screen refresh
+	- rl_newline: make sure to deactivate the region even though we don't
+	  do any redisplay with it yet
+
+lib/readline/readline.h
+	- rl_activate_mark,rl_deactivate_mark,rl_mark_is_active_p,
+	  rl_keep_mark_active: new extern function declarations. They are
+	  public functions for now
+
+lib/readline/readline.c
+	- readline_internal_setup: make sure the region starts out as not
+	  active
+	- readline_internal_charloop: make sure to deactivate the mark after
+	  a command, unless the command calls rl_keep_mark_active keep it
+	  active
+
+lib/readline/kill.c
+	- rl_bracketed_paste_begin: set rl_mark before inserting the pasted
+	  text, so the pasted text defines the region
+	- rl_bracketed_paste_begin: set the region as active after inserting
+	  the pasted text
+
+lib/readline/util.c
+	- _rl_abort_internal: make sure we deactivate the region
+
+lib/readline/{terminal.c,rlprivate.h}
+	- _rl_cr: new function to just output the term_cr (or '\r'). Part of
+	  the active region patch
+
+lib/readline/display.c
+	- _rl_cr: use where appropriate to replace MSDOS-dependent code and
+	  calls to tputs
+
+lib/readline/terminal.c
+	- get and store the terminal sequences to enter and exit standout
+	  (usually some background color) mode
+
+				   3/26
+				   ----
+subst.[ch]
+	- copy_fifo_list: now returns void *
+	- close_new_fifos: now takes a void * as the first argument, since it's
+	  usually the return value from copy_fifo_list
+	- close_new_fifos: (named pipes): cast first argument to a char *,
+	  since copy_fifo_list will (someday) return a bitmap
+	- close_new_fifos: (HAVE_DEV_FD): cast first argument to a pid_t *,
+	  since it takes a copy of dev_fd_list; use that in the loop to
+	  determine whether or not to close file descriptors. First half of
+	  fix for bug reported by Valentin Lab <valentin.lab@kalysto.org>
+	- unlink_fifo_list: (named pipes): when compacting the list, make sure
+	  to avoid the copy if i == j, and, after copying fifo_list[i] to
+	  fifo_list[j], null out fifo_list[i] so we don't try to access it
+	  later
+
+execute_cmd.c
+	- execute_command_internal: don't call reap_procsubs after executing
+	  the command. Rest of fix for bug reported by Valentin Lab
+	  <valentin.lab@kalysto.org>
+	- execute_command_internal,execute_builtin_or_function: ofifo_list is
+	  now a void * instead of a char *
+
+				   3/30
+				   ----
+lib/readline/{terminal.c,rlprivate.h}
+	- _rl_standout_{on,off}: new functions, to enter and exit terminal
+	  standout mode
+
+lib/readline/rlprivate.h
+	- _rl_refresh_line: new extern declaration
+
+lib/readline/display.c
+	- visible and invisible lines: added members to deal with tracking the
+	  `current face'
+	- realloc_line: broke code to manage visible_line and invisible_line
+	  allocation out of init_line_structures, added code to manage arrays
+	  of visible and invisible line face info per character
+	- invis_{addc,adds,nul}: new functions to add characters to the
+	  invisible line and keep the invisible face data updated with whatever
+	  the current face is
+	- set_active_region: keep track of the display region that should be
+	  in standout mode
+	- rl_redisplay: use invis_addc/adds/nul to update the invisible line
+	  buffer instead of modifying invisible_line directly
+	- _rl_refresh_line: moved body of function here from text.c
+
+lib/readline/text.c
+	- rl_refresh_line: now just calls _rl_refresh_line and marks the display
+	  as fixed
+
+				   3/31
+				   ----
+variables.c
+	- bind_variable_internal: dynamic variables with assignment functions
+	  now honor the readonly attribute by giving an error. Fixes issue
+	  reported by Rob Landley <rob@landley.net>
+	- assign_seconds: allow seconds to be assigned using an arithmetic
+	  expression
+	- assign_random: allow RANDOM to be assigned using an arithmetic
+	  expression
+
+doc/{bash.1,bashref.texi}
+	- HISTCMD: note that assignments to HISTCMD have no effect
+
+				    4/2
+				    ---
+execute_cmd.c
+	- execute_in_subshell: make sure we note that we're not reading our
+	  command input from a buffered stream any more, so we don't
+	  sync the buffered stream backwards in subsequent commands this
+	  subshell runs. Fixes bug reported by OÄuz <oguzismailuysal@gmail.com>
+
+				    4/3
+				    ---
+builtins/read.def
+	- read_builtin: if a read in posix mode is interrupted by a signal,
+	  make sure to preserve the value of errno around calls to
+	  check_signals and run_pending_traps so any error message isn't quite
+	  as confusing. Issue reported by Stan Marsh <gazelle@xmission.com>
+
+lib/sh/zread.c
+	- zread: preserve value of errno (always EINTR) around calls to
+	  check_signals or check_signals_and_traps
+
+trap.c
+	- run_debug_trap: allow suppress_debug_trap_verbose being set to
+	  turn off `set -v' temporarily while executing the DEBUG trap (if
+	  it's set)
+
+builtins/fc.def
+	- set suppress_debug_trap_verbose so set -v won't be in effect while
+	  the DEBUG trap runs. Most recently reported by Ami Fischman
+	  <ami@fischman.org>; originally raised by Boruch Baum
+	  <boruch_baum@gmx.com> back in 10/2017
+
+				    4/6
+				    ---
+lib/readline/display.c
+	- puts_face,putc_face: new functions to write strings or characters to
+	  the display while handling standout mode
+	- update_line,_rl_move_cursor_relative: take additional argument(s)
+	  describing the visible and invisible faces corresponding to the
+	  visible and invisible lines, respectively
+
+lib/readline/readline.c
+	- _rl_enable_bracketed_paste: for the time being, initialize to 1 (on
+	  by default)
+
+trap.c
+	- run_interrupt_trap: set pending_sigs[SIGINT] and catch_flag to 0
+	  since run_pending_trap usually does these things
+
+sig.c
+	- throw_to_top_level: only call the SIGINT trap if there is a SIGINT
+	  trap pending (shouldn't matter, just a check)
+
+bashline.c
+	- bash_event_hook: try to identify the signal of interest we've
+	  received
+	- bash_event_hook: if in posix mode running the read builtin, and we
+	  get a (trappped) SIGINT, throw to top level so we can interrupt
+	  the read. From a report by Robert Elz <kre@munnari.oz.au>
+
+				    4/7
+				    ---
+lib/readline/display.c
+	- update_line: make sure to update and compare face data at the same
+	  time as comparing old and new line data: the lines are only the same
+	  if the face information and character information are identical
+	  (ofd, ols, etc.)
+	- update_line: make sure to copy face data along with line data
+	- update_line: use puts_face in place of _rl_output_some_chars to
+	  output face data along with line data
+	- _rl_move_cursor_relative: when we write characters, make sure to take
+	  the face data into account using puts_face
+	  [END OF INTEGRATION OF ACTIVE MARK AND FACE PATCHES from
+	  Daniel Colascione <dancol@google.com>]
+
+{jobs,nojobs}.c
+	- make_child: to avoid installing a handler for SIGTERM in interactive
+	  shells, and avoid race conditions with child processes resetting the
+	  SIGTERM signal handler to the default, block SIGTERM and then
+	  reset the SIGTERM handler to SIG_DFL before fork, then reset the
+	  handler to SIG_IGN and unblock it in the parent after fork() returns.
+	  Fix for readline and SIGTERM handling reported by Chris Down
+	  <chris@chrisdown.name> (original change was back in 2/2013) that
+	  allows a bash waiting in readline() for input to be killed with a
+	  SIGTERM sent by another process
+	- take out calls to RESET_SIGTERM, no longer needed
+
+execute_cmd.c
+	- execute_in_subshell,execute_simple_command,execute_disk_command:
+	  remove calls to CHECK_SIGTERM, since we don't install a handler
+	  any more
+
+lib/readline/readline.c
+	- _rl_enable_bracketed_paste: enabled by default for the time being
+
+				    4/9
+				    ---
+jobs.h
+	- JWAIT_WAITING: new flag for wait functions; means only wait for jobs
+	  with the J_WAITING flag set
+	- J_WAITING: new job flag, part of arg list to `wait -n'
+	- IS_WAITING(i): job i has the J_WAITING flag set
+
+jobs.c
+	- wait_for_any_job: if the flags includes JWAIT_WAITING, we only return
+	  jobs with the J_WAITING flag already set; otherwise we skip them.
+	  For `wait -n args' support
+
+builtins/wait.def
+	- set_waitlist: take a list of jobspecs and set the J_WAITING flag in
+	  each valid job from the list
+	- unset_waitlist: turn off the J_WAITING flag for all jobs where it's
+	  set
+	- wait_builtin: if -n is supplied with a list of arguments, set the
+	  J_WAITING flag in each job in the list, call wait_for_any_job with
+	  the JWAIT_WAITING flag, and clean up by calling unset_waitlist().
+	  From a suggestion from Robert Elz <kre@munnari.oz.au> back in 3/2019
+	  (originally in 10/2017)
+
+				   4/11
+				   ----
+lib/readline/display.c
+	- update_line: in step 5b of the line wrapping prompt code, make sure
+	  OFDF and NFDF are set before performing a dumb update
+
+				   4/12
+				   ----
+sig.c
+	- termsig_handler: make sure to restore TOP_LEVEL_SIGMASK before
+	  resending a terminating signal to ourselves, in the event that this
+	  is called in a signal handler context with the terminating signal
+	  blocked. Inspired by a report from <gentoo_eshoes@tutanota.com>
+
+				   4/13
+				   ----
+
+lib/readline/text.c
+	- rl_newline: if the region is active, call rl_redisplay to clear
+	  standout mode before returning
+
+lib/readline/display.c
+	- norm_face: new function to mark a portion of the invisible face
+	  buffer as normal text (no standout)
+	- rl_redisplay: if the line consumes more than a screen's worth of
+	  lines, mark the lines that are off the top of the display as having
+	  a `normal' face
+
+				   4/14
+				   ----
+variables.c
+	- LINENO: no longer has the integer attribute, since it does not take
+	  arithmetic expressions on assignment (use $((expr)) instead)
+
+lib/readline/mbutil.c
+	- _rl_find_prev_utf8char: new function, uses the structure of UTF-8
+	  characters to find the start of the previous one no matter where we
+	  start: at the beginning of the next character, at the end of a
+	  multibyte character, or in the middle of a multibyte character.
+	  EXPERIMENTAL
+	- _rl_find_prev_mbchar_internal: for now, call _rl_find_prev_utf8char
+	  if we are in a UTF-8 locale. EXPERIMENTAL
+				   
+				   4/15
+				   ----
+lib/readline/mbutil.c
+	- _rl_utf8_mblen: changes to handle invalid multibyte sequences better,
+	  even when N means that the sequence would be too short anyway
+
+examples/loadables/csv.c
+	- csv: new loadable builtin to parse a line of csv data and store it
+	  into an array supplied as an argument
+
+				   4/16
+				   ----
+examples/loadables/cut.c
+	- cut: new loadable builtin
+	- lcut: new builtin that does what cut does but on a string supplied
+	  as an argument (only one string for now)
+
+				   4/17
+				   ----
+jobs.h
+	- FORK_SYNC,FORK_ASYNC,FORK_NOJOB: new flag values for the second
+	  argument to make_child
+
+jobs.c
+	- make_child: now takes a set of flags as the second argument
+
+execute_cmd.c
+	- make_child: change callers to pass FORK_ASYNC instead of a non-zero
+	  value as the second argument
+
+subst.c
+	- make_child: change callers to pass FORK_ASYNC instead of a non-zero
+	  value as the second argument
+
+doc/{bash.1,bashref.texi}
+	- document that the words in a compound array assignment undergo all
+	  the shell word expansions, including filename generation and word
+	  splitting. From a report from E. Choroba <choroba@matfyz.cz>
+
+				   4/18
+				   ----
+subst.c
+	- command_substitute: use JOB_CONTROL instead of INTERACTIVE in the
+	  test to determine whether or not to give the terminal back to
+	  pipeline_pgrp
+
+jobs.c
+	- make_child: if FORK_NOTERM is set in the flags argument, don't call
+	  give_terminal_to
+
+{jobs,nojobs}.c,jobs.h
+	- wait_for: now takes a second argument, a flags word
+
+{execute_cmd,subst}.c
+	- wait_for: change all callers to add second argument to wait_for
+
+jobs.c
+	- wait_for: if JWAIT_NOTERM is set in the flags argument, don't call
+	  give_terminal_to
+
+				   4/19
+				   ----
+subst.c
+	- command_substitute: block SIGINT around call to read_comsub, so we
+	  let any interrupts affect the command substitution. Fixes issue
+	  reported by DALECKI Léo <leo.dalecki@ntymail.com>
+
+hashcmd.h
+	- FILENAME_HASH_BUCKETS: increase to 256
+
+assoc.h
+	- ASSOC_HASH_BUCKETS: new define, set to 1024
+
+variables.c
+	- make_new_assoc_variable,make_local_assoc_variable: call assoc_create
+	  with ASSOC_HASH_BUCKETS as argument. This changes the hash function
+	  and how the array keys are ordered (which is not guaranteed)
+
+builtins/read.def
+	- read_builtin: in posix mode, or if the read call returns -1/EINTR,
+	  don't call run_pending_traps until the read command returns. This
+	  allows a trap action to see the same exit status that the read
+	  builtin would return when it exits on a signal (e.g., SIGINT == 130).
+	  From a suggestion by <gentoo_eshoes@tutanota.com>
+
+				   4/20
+				   ----
+hashlib.c 
+	- hash_rehash: function to rehash a table, after increasing or decreasing
+	  the number of buckets. From patches from Thomas Kremer
+	  (https://savannah.gnu.org/patch/?9850) and Koichi Murase
+	  <myoga.murase@gmail.com>
+	- hash_grow,hash_shrink: grow or shrink a hash table by a factor of
+	  HASH_REHASH_MULTIPLIER (4)
+	- hash_insert,hash_search: call hash_grow if necessary
+
+arrayfunc.c
+	- convert_var_to_{array,assoc}: if the original variable had no value
+	  (it was unset), the array variable should be unset as well. Reported
+	  by andrej@podzimek.org
+
+				   4/21
+				   ----
+bashline.c
+	- set_saved_history: change logic used to decide where in the history
+	  operate_and_get_next should start by using a logical offset into the
+	  history list that is an offset from history_base. This avoids having
+	  to take whether or not the history is stifled and full into account.
+	  Report and fix from Greg Price <gnprice@gmail.com>
+	- operate_and_get_next: just calculate the logical offset of where we
+	  should be in the history instead of an absolute offset
+
+lib/readline/input.c
+	- _rl_nchars_available: new function, returns the number of characters
+	  available to be read if FIONREAD is available
+
+				   4/22
+				   ----
+lib/readline/{readline.c,rlprivate.h}
+	- _rl_pending_command: new struct to hold information about a pending
+	  command for readline to execute when the current command completes.
+	  A command can set this up so that it gets executed like a
+	  continuation before redisplay
+
+lib/readline/readline.c
+	- readline_internal_charloop: after _rl_dispatch returns, check
+	  _rl_command_to_execute, and, if it's non-zero, redisplay and then
+	  execute it as a command
+	- added a small set of library-private functions for managing the
+	  executing key sequence (not used yet)
+
+lib/readline/isearch.c
+	- _rl_isearch_dispatch: if we have found an opcode or have added a
+	  character to the search string and searched for it, reset the keymap
+	  and okeymap members of the search context in preparation for reading
+	  another key sequence/opcode
+	- _rl_isearch_dispatch: if we read a key sequence bound to an editing
+	  command that is not an `opcode', set up _rl_command_to_execute to
+	  execute it after the searching returns and arrange to break out of
+	  the search
+	- _rl_isearch_dispatch: if we paste in text from bracketed paste, set
+	  the mark as active so we can highlight it when we display the search
+	  string
+	- _rl_isearch_dispatch: if we've found the search string, activate the
+	  mark and set rl_point and rl_mark so the search string is highlighted
+	  when we display the search results
+	- _rl_isearch_dispatch: do translation for keys that map to
+	  rl_do_lowercase_version like we do when dispatching while reading a
+	  key sequence
+
+				   4/23
+				   ----
+lib/readline/isearch.c
+	- _rl_isearch_dispatch: if bracketed paste mode is enabled and there are
+	  enough characters waiting in the terminal's input queue, try to read
+	  the bracketed paste prefix and jump straight to the opcode execution
+	  if we read it. Otherwise, just go on with the ESC. Inspired by report
+	  from <gentoo_eshoes@tutanota.com>
+
+parse.y
+	- parse_comsub: posix-mode shells don't allow a closing right paren to
+	  delimit a pending here-document -- it requires the newline
+
+doc/bashref.texi
+	- POSIX mode: updated posix mode description with the new here-document
+	  delimiter requirement
+
+lib/readline/search.c
+	- _rl_nsearch_dispatch: if bracketed paste mode is enabled, and we read
+	  an ESC, try to see if we have a bracketed paste op and insert the
+	  pasted next. If we don't, go on with the ESC
+	- _rl_nsearch_dosearch: experimental code to highlight the search string
+	  when displaying the line found in the history. Only done when we are
+	  not searching for a pattern, since we don't have information on the
+	  end of the matching portion of the line. Experimental because it
+	  changes where we put point and mark if searching is successful
+
+expr.c
+	- expr_streval: if find_variable for the case where the string is not
+	  an array reference doesn't find anything, see if we can find
+	  something by using find_variable_last_nameref and use the value
+	  from there in the call to expr_streval, kind of using the expression
+	  recursion to complement the nameref recursion. Report from
+	  Daniel Molina <lluvia@autistici.org>
+
+				   4/24
+				   ----
+jobs.c
+	- {start,stop}_pipeline: don't reset pipeline_pgrp to 0 if it's already
+	  the same as shell_pgrp, since we don't want to reset it in the middle
+	  of a shell started to run a command or process substitution (after
+	  forking a child to run one command, but before forking another, for
+	  instance). Reported by Rob Landley <rob@landley.net>
+
+				   4/27
+				   ----
+parse.y
+	- function_def: break the productions starting with `function' without
+	  `()' into two productions to avoid a shift-reduce conflict. Report
+	  and patch from Dale R. Worley <worley@alum.mit.edu>
+
+variables.h
+	- localvar_inherit: add extern declaration here
+
+subst.c
+	- shell_expand_word_list: take out change from 3/17 to pass -I to
+	  make_internal_declare; it generates errors the user will find
+	  confusing if there is a variable with the same name but a different
+	  type at a previous scope
+	- shell_expand_word_list: check for and note whether or not -I is
+	  supplied to the declaration command, since it changes the default
+	  behavior of a compound assignment without -a or -A
+	- shell_expand_word_list: if we have a compound assignment that is an
+	  argument to a declaration command, but there are no options supplied
+	  to the command that determine the type of the array, make sure we
+	  call make_internal_declare with either -a (no localvar_inherit or -I)
+	  or at least -- (if we are inheriting), because  we don't want the
+	  declare to get skipped before we perform the word assignment. Fixes
+	  bug reported by Ross Goldberg <ross.goldberg@gmail.com>
+
+				   4/28
+				   ----
+subst.c
+	- expand_declaration_argument: new function, broke code that handles
+	  compound assignments that are arguments to declaration commands out
+	  of shell_expand_word_list into this function. No functional change
+	  yet
+
+				   4/29
+				   ----
+subst.c
+	- expand_compound_assignment_word: helper function for
+	  expand_declaration_argument: takes NAME[+]=( VALUE ), converts VALUE
+	  to a list of words, then single-quotes each word and reconstructs
+	  the original word. This assumes the result will go to
+	  do_word_assignment, which will remove the single quotes
+	- expand_oneword: helper function for expand_compound_assignment_word,
+	  takes VALUE and performs the splitting into words, and then the
+	  expansion and single-quoting of each individual word. Indexed and
+	  associative arrays take different code paths, because they undergo
+	  different expansions and associative arrays need special handling to
+	  avoid having to scan for the end of the subscript multiple times
+	- expand_declaration_argument: call expand_compound_assignment_word to
+	  get the expansion-before-calling-builtins word expansion sequence
+	  correct. Better fix for for bug report from Kevin Locke
+	  <kevin@kevinlocke.name>,
+	  https://savannah.gnu.org/support/index.php?109669
+
+arrayfunc.c
+	- quote_array_compound_word: take [IND]=VALUE and convert it to
+	  ['IND']='VALUE'. Called by quote_compound_array_list for each word
+	  in the list
+	- expand_and_quote_assoc_qword: take [KEY]=VALUE and convert it to
+	  ['expanded-key']='expanded-value' (or VALUE to 'expanded-value').
+	  Called by subst.c:expand_oneword() for each word in the list
+	- quote_compound_array_list: take a list of words and convert each
+	  [IND]=VALUE to ['IND']='VALUE' (or just 'VALUE' if there is no
+	  [IND]=). Used for indexed arrays
+
+arrayfunc.h
+	- expand_and_quote_assoc_word,quote_compound_array_list: new extern
+	  declarations
+
+				   4/30
+				   ----
+doc/{bashref.texi,bash.1}
+	- rework description of reserved words a little; add a reserved words
+	  node to bashref.texi. Based on a report from Dale R. Worley
+	  <worley@alum.mit.edu>
+
+builtins/history.def
+	- history_builtin: if the shell is restricted, don't allow pathnames
+	  with slashes to be read or written. From a report from
+	  Diffie <nano@mm.st>
+
+shell.c
+	- maybe_make_restricted: add HISTFILE to the list of readonly variables
+
+doc/{bashref.texi,bash.1}
+	- document new restricted shell restrictions
+
+				    5/1
+				    ---
+jobs.c
+	- wait_for: don't try to give the terminal to shell_pgrp if JWAIT_NOTERM
+	  is set in the flags argument
+
+subst.c
+	- command_substitute: call make_child with FORK_NOTERM flag so it
+	  doesn't try to set the terminal's process group
+	- command_substitute: call wait_for with JWAIT_NOTERM so it doesn't
+	  try to set the terminal's process group
+	- command_substitute: now that wait_for doesn't try to reset the
+	  terminal's process group, remove the code that tries to clean up
+	  after that
+
+				    5/4
+				    ---
+doc/bash.1
+	- make sure to mention /etc/inputrc as the ultimate default readline
+	  init file, like other documentation does. Update from
+	  Greg Price <gnprice@gmail.com>
+
+lib/readline/readline.c
+	- if the private startup hook function variable _rl_internal_startup_hook
+	  is set, execute that after any user-specified startup hook
+
+lib/readline/rlprivate.h
+	- _rl_internal_startup_hook: new extern declaration
+
+bashline.c,lib/readline/{misc.c,readline.h}
+	- operate_and_get_next: moved to rl_operate_and_get_next so it's
+	  available to all readline programs, uses _rl_internal_startup_hook.
+	  Based on patch from Greg Price <gnprice@gmail.com>
+
+lib/readline/funmap.c
+	- "operate-and-get-next": now a bindable readline command
+
+lib/readline/emacs_keymap.c
+	- rl_operate_and_get_next: bound to ^O in emacs mode by default
+
+doc/bash.1,lib/readline/{readline.3,rluser.texi}
+	- operate-and-get-next: move to readline section of the manuals, out of
+	  bash-specific functions section
+
+				    5/5
+				    ---
+hashlib.c
+	- hash_string: use a series of shifts and adds to avoid a multiply by
+	  FNV_PRIME. From Landon Curt Noll's FNV web page
+
+builtins/fc.def
+	- fc_gethist,fc_gethnum: now take an additional argument indicating the
+	  operating mode: if the arg is 1, fc is listing commands; if it is 0,
+	  fc is executing commands. Affects how -0 is handled (fc_gethnum
+	  returns -1). Changed callers to handle the return value appropriately.
+	  Report from Jason Franklin <jason.franklin@quoininc.com> about
+	  seg fault and core dump
+	- fc_builtin: if fc_gethnum returns < 0 when setting histbeg or histend,
+	  report a range error
+
+doc/bash.1,lib/readline/doc/hsuser.texi
+	- fc: document how 0 and -0 are treated for listing and executing
+
+shell.c
+	- run_one_command: call parse_and_execute with SEVAL_RESETLINE so the
+	  line number gets set to 1. Reported by Rob Landley <rob@landley.net>
+
+				    5/8
+				    ---
+support/config.{guess,sub}
+	- update to latest versions
+
+configure.ac
+	- add support for `genode' from Emery Hemingway <ehmry@posteo.net>
+
+				   5/14
+				   ----
+test.c
+	- term: fix case where an argument that looks like a unary operator,
+	  but doesn't have enough tokens left to have an argument to that
+	  operator, was not being treated as a one-argument test. Affects
+	  only uses of test with four and greater arguments, which posix says
+	  are unspecified. This is a bug, or at least an incompatibility, at
+	  least 30 years old.
+	- test_command: if there are unconsumed arguments, call test_syntax_error
+	  with a `syntax error' argument if the first remaining argument starts
+	  with a `-'. Better than a generic `too many arguments' error
+
+				   5/19
+				   ----
+configure.ac,config.h.in
+	- getrandom: add test, define HAVE_GETRANDOM
+	- getentropy: add test, define HAVE_GETENTROPY
+
+variables.c
+	- get_urand32: use getrandom; provide imperfect emulation that uses
+	  getentropy if available, and falls back to reading /dev/urandom if
+	  that's not available. The idea is to use /dev/urandom as little as
+	  possible
+
+				   5/20
+				   ----
+configure.ac
+	- updated version to 5.1-alpha
+
+lib/readline/readline.h
+	- updated defines to readline version 8.1
+
+variables.c
+	- brand: if shell_compatibility_level is 50 or below, don't xor the
+	  top and bottom halves of the 32-bit random number together, since
+	  previous versions did not
+
+				   5/21
+				   ----
+COMPAT
+	- overhauled and updated the descriptions of the various shopt compatNN
+	  options
+
+doc/bashref.texi
+	- Shell Compatibility Mode: new section, describes compatibility levels,
+	  BASH_COMPAT, and the various compatNN shopt options
+
+				   5/23
+				   ----
+doc/bash.1
+	- added Shell Compatibility mode section
+
+doc/{bash.1,bashref.texi}
+	- changed shopt section to list the compatibility options and refer
+	  to Shell Compatibility Mode section
+	- BASH_COMPAT: overhauled the text, refers to Shell Compatibility Mode
+	  section
+
+				   5/27
+				   ----
+variables.c,/lib/sh/random.c
+	- moved functions that manage 16-bit and 32-bit random values to
+	  lib/sh/random.c
+
+alias.c
+	- add_alias: don't bother checking null alias values for ending in
+	  space or tab
+
+braces.c,include/typemax.h
+	- move sh_imaxabs and overflow and underflow detection to typemax.h
+	  so the expression evaluation code can use it in the future
+
+				   5/28
+				   ----
+lib/readline/kill.c
+	- _rl_bracketed_read_mbstring: make sure to fill in mb[0] even if
+	  the locale says MB_CUR_MAX == 1 in case a caller uses it. Partial
+	  fix for bug reported by Phi Debian <phi.debian@gmail.com>
+
+lib/readline/vi_mode.c
+	- rl_vi_change_char: make sure _rl_vi_last_replacement gets filled in
+	  in the case where MB_CUR_MAX == 1. Rest of fix for bug reported by
+	  Phi Debian <phi.debian@gmail.com>
+	- _rl_vi_callback_change_char: same fix for _rl_vi_last_replacement
+
+				   5/29
+				   ----
+lib/malloc/malloc.c
+	- __P -> PARAMS
+	- union mhead: now 16 bytes to force 16-byte alignment; extra 8 bytes
+	  at the end of struct minfo to use for guard bytes. Enabled if
+	  pointers are 64 bits (SIZEOF_CHAR_P == 8)
+	- if we have 64-bit pointers, prepopulate the 64-byte bin first instead
+	  of the 32-byte bin (pointers and WORD_DESCs still fit into 32 bytes,
+	  but WORD_LISTs are now 36 bytes with malloc overhead). We can still
+	  split 64-byte blocks to satisfy 32-byte requests
+	- internal_malloc: fill in the new 8 mh_magic8 bytes with MAGIC1 guard
+	  bytes
+	- internal_malloc: print a warning message if the returned pointer is
+	  not aligned according to MALIGN_MASK
+	- internal_free: detect underflow by checking that mh_magic8 is full
+	  of MAGIC1 bytes
+	- internal_realloc: detect underflow by checking that mh_magic8 is full
+	  of MAGIC1 bytes
+
+lib/malloc/stats.c
+	- _print_malloc_stats: slight adjustment for better column alignment
+
+				    6/1
+				    ---
+execute_cmd.c
+	- execute_command_internal: treat a redirection failure with errexit
+	  set as a command failure that exits the shell. Bug report from
+	  Hyunho Cho <mug896@naver.com>
+
+				    6/3
+				    ---
+redir.c
+	- redirection_error: takes a new argument, FN, which if non-NULL is
+	  the filename to be used in the error message.
+
+redir.[ch],builtins/evalstring.c
+	- redirection_error: changed extern declaration and callers
+
+redir.c
+	- do_redirection_internal: takes a new third parameter, FNP, a char **
+	  to use (*FNP, if non-NULL) to store and return the expanded filename
+	  for those redirections that take one
+	- do_redirections: pass a char ** (&fn) to do_redirection_internal to
+	  get a pointer to the expanded filename; pass it to redirection_error
+	  if appropriate. Free FN in any case, since do_redirection_internal
+	  won't. Fix for double expansion of filename in certain redirections
+	  reported by OÄuz <oguzismailuysal@gmail.com>
+
+				    6/4
+				    ---
+parse.y
+	- parse_comsub: while we're reading a here-document, don't perform any
+	  history expansion (set history_expansion_inhibited). Fixes issue
+	  reported by "ladyrick" <ladyrick@qq.com>
+
+general.h,parse.y
+	- __P -> PARAMS
+
+shell.c
+	- shellstart: struct timeval used to initialize shell starting time;
+	  shell_start_time now initialized from shellstart.tv_sec
+
+variables.c
+	- assign_seconds: reset shellstart to set shell starting time
+
+pcomplete.c
+	- include posixtime.h instead of <sys/time.h>
+
+lib/sh/{ufuncs,uconvert}.c
+	- include posixtime.h instead of the inline conditional includes
+
+aclocal.m4
+	- BASH_STRUCT_TIMEVAL: convert to use AC_COMPILE_IFELSE instead of the
+	  deprecated AC_HEADER_EGREP
+
+posixtime.h
+	- struct timeval: if HAVE_TIMEVAL is not defined, provide a replacement
+	  definition
+
+lib/sh/gettimeofday.c
+	- gettimeofday: replacement function, so we don't have to use
+	  HAVE_GETTIMEOFDAY in the rest of the code
+
+				    6/5
+				    ---
+{lots of files}.[ch]
+builtins/{lots of files}.{c,h,def}
+lib/glob/{lots of files}.[ch]
+lib/malloc/{lots of files}.[ch]
+lib/sh/{lots of files}.c
+include/{lots of files}.h
+examples/loadables/{lots of files}.c
+	- __P -> PARAMS
+
+doc/{bash.1,bashref.texi}
+	- SECONDS: clarify that the number of seconds is always determined by
+	  querying the system clock
+
+				    6/8
+				    ---
+configure.ac
+	- if CFLAGS is not supplied in the environment or on the command line,
+	  add the gcc options that suppress warnings about parens and print
+	  formats in a slightly different way that will avoid some collisions
+
+lib/readline/readline.c
+	- _rl_dispatch_subseq: don't set rl_last_func to rl_vi_arg_digit, just
+	  the same as if it were rl_digit_argument. This allows functions like
+	  rl_yank_last_arg, which behave differently when called multiple times
+	  in a row, to work closer to what is expected. This allows what
+	  Leo Alekseyev <dnquark@gmail.com> reported to work, with caveats
+
+lib/readline/vi_mode.c
+	- rl_vi_yank_arg: make sure to pass `key' to rl_yank_nth_arg, in case
+	  it needs to use it later
+	- rl_vi_redo: suppress attempts to redo `.' when the current keymap is
+	  vi_movement_keymap, since that will recursively call vi_redo
+
+				   6/11
+				   ----
+redir.c
+	- limit HEREDOC_PIPESIZE to 4096 on FreeBSD; that is where it can
+	  handle atomic writes without hanging. Tested on FreeBSD 13
+
+[bash-5.1-alpha frozen]
+
+				   6/15
+				   ----
+subst.c
+	- do_assignment_internal: call stupidly_hack_special_variables on the
+	  name returned from the variable assignment, in case there was a
+	  nameref expansion, and on the original name only if the assignment
+	  returned NULL. Fixes bug reported by James D. Lin <jamesdlin@gmail.com>
+
+				   6/16
+				   ----
+builtins/hash.def
+	- hash_builtin: don't print anything if the hash table is empty when
+	  listing portably (-l) unless the shell compatibility level is <= 50
+	  Issue originally raised by <beluro@web.de>
+
+				   6/17
+				   ----
+pathexp.c
+	- glob_name_is_acceptable: extend GLOBIGNORE to ignore `.' and `..'
+	  as a terminal pathname component instead of just ignoring filenames
+	  that are `.' or `..'. From a suggestion by Ilkka Virta
+	  <itvirta@iki.fi>
+
+				   6/18
+				   ----
+po/Makefile.in.in
+	- MKINSTALLDIRS: deprecated, no longer in AM_INTL_SUBDIR, so we have
+	  to create the variable manually
+
+lib/readline/doc/rltech.texi
+	- add descriptions of the active mark functions that are available to
+	  applications. I guess they will remain public
+
+subst.c
+	- valid_parameter_transform: new function, reject transformations
+	  longer than a single character or invalid transformation operators
+	- parameter_brace_transform: call valid_parameter_transform
+
+				   6/22
+				   ----
+lib/sh/zread.c
+	- lbuf: bump size up to ZBUFSIZ (default 4096). From a report by
+	  Jason A. Donenfeld <Jason@zx2c4.com>
+
+lib/sh/zcatfd.c
+	- zcatfd: lbuf: bump size up to ZBUFSIZ (default 4096)
+
+lib/sh/zmapfd.c
+	- zmapfd: lbuf: bump size up to ZBUFSIZ (default 4096)
+
+				   6/29
+				   ----
+aclocal.m4
+	- BASH_FUNC_SBRK: changes for cross-compiling on FreeBSD variants,
+	  from Jessica Clarke <jrtc27@jrtc27.com>
+
+xmalloc.c
+	- HAVE_SBRK: use #if instead of #ifdef so we only use it if we think
+	  it works
+
+examples/loadables/finfo.c
+	- st_dev,st_nlink: cast to unsigned long, report from Jessica Clarke
+	  <jrtc27@jrtc27.com> 
+
+unwind_prot.c
+	- unwind_protect_mem_internal: make sure we allocate at least as many
+	  bytes for an entire UNWIND_ELT. Fix from Jessica Clarke
+	  <jrtc27@jrtc27.com>
+
+				    7/1
+				    ---
+eval.c
+	- alrm_catcher: use write(2) instead of fprintf to print the
+	  auto-logout message to the terminal
+
+jobs.c
+	- UNQUEUE_SIGCHLD: set queue_sigchld to 1 around call to waitchld(),
+	  since it is not being called from a signal handler and so SIGCHLD is
+	  not blocked. Fixes report by Godmar Back <godmar@gmail.com>
+
+				    7/2
+				    ---
+doc/{bash.1,bashref.texi}
+	- read: clarify that without any name arguments, the line assigned to
+	  REPLY is not modified. From a question by M. Nejat AYDIN
+	  <mnaydin@yahoo.com> with input from Eli Schwartz
+	  <eschwartz@archlinux.org>
+
+				    7/5
+				    ---
+lib/readline/vi_mode.c
+	- _rl_vi_done_inserting: make sure to close out all undo groups when
+	  leaving insert mode, so we don't have anything dangling.
+	  Report and fix from David Fries <David@Fries.net>
+
+				    7/6
+				    ---
+lib/readline/vi_mode.c
+	- _rl_vi_domove_motion_cleanup: the `c' and `C' commands should enter
+	  insert mode even if the motion command doesn't delete any text.
+	  From a report by David Fries <David@Fries.net>
+	- _rl_vi_done_inserting: add a missing rl_end_undo_group when
+	  _rl_vi_doing_insert is set: there should be one begun by
+	  rl_vi_start_inserting and one begun by the command (change or replace).
+	  From a report by David Fries <David@Fries.net>
+	- rl_vi_replace: set _rl_vi_last_key_before_insert to 'R' explicitly,
+	  since other code checks that and we want to allow users to rebind
+	  this function
+
+				    7/7
+				    ---
+lib/readline/vi_mode.c
+	- rl_vi_{delete,change,yank}_to: if we have a non-null _rl_vimvcxt,
+	  just reinitialize it so we don't have to allocate a new one. This is
+	  a change primarily for callback mode, and fixes a memory leak
+
+builtins/evalstring.c
+	- optimize_shell_function: try to optimize away the fork in the last
+	  command in a shell function body, under certain conditions
+
+execute_cmd.c
+	- execute_function: attempt to optimize away forks in a shell function
+	  that is already marked NO_FORK and being executed in a command
+	  substitution
+
+				    7/8
+				    ---
+{jobs,nojobs,trap,unwind_prot}.c,lib/malloc/{malloc,table}.c
+	- interrupt_immediately: remove, no longer used
+
+jobs.c
+	- waitchld: don't perform asynchronous notification if we are currently
+	  executing a builtin (executing_builtin != 0). Inspired by a report
+	  from Godmar Back <godmar@gmail.com>
+
+				    7/9
+				    ---
+lib/readline/signals.c
+	- _rl_handle_signal: block SIGTTOU while handling a SIGTTOU, since we
+	  no longer run this in a signal handling context where SIGTTOIU would
+	  be blocked
+
+				   7/14
+				   ----
+execute_cmd.c
+	- execute_simple_command: use new variable `cmdflags' instead of using
+	  simple_command->flags directly; initialize from simple_command->flags
+	- check_command_builtin: take a simple command list of words starting
+	  with `command' and including a command_word argument, and peel off
+	  the `command' and any instances of `-p' and `--' and return the
+	  updated list
+	- execute_simple_command: if the first word of the simple command is
+	  `command', call check_command_builtin to peel off any `command' and
+	  `-p' and `--' and go on to execute the rest of the words as a simple
+	  command. If we're in posix mode, we've got the special builtins
+	  handled before this runs. Fixes complaint about `command' in the
+	  background running an extra bash process from Dmitry Alexandrov
+	  <dag@gnui.org>
+
+				   7/17
+				   ----
+doc/bash.1
+lib/readline/doc/{rltech,hstech,rluser}.texi
+lib/readline/doc/{readline,history}.3
+	- a few small tweaks to make the language gender-neutral
+
+				   7/18
+				   ----
+subst.c
+	- expand_word_internal: case `:' make sure the shell is either not in
+	  posix mode or W_TILDEEXP is set before turning on W_ITILDE. The old
+	  code would turn it on unconditionally if the W_ASSIGNMENT flag was
+	  set. Fixes bug reported by OÄuz <oguzismailuysal@gmail.com>
+
+				   7/20
+				   ----
+builtins/complete.def
+	- replace macros used to print compspec actions, options, and other
+	  info with a small set of functions that traverse the structs used
+	  to hold that information and print everything instead of eumerating
+	  each option and action separately. From a patch submitted by
+	  Martin Kealey <martin@kurahaupo.gen.nz>
+
+				   7/27
+				   ----
+variables.c
+	- push_posix_tempvar_internal: restore $SHELLOPTS after restoring the
+	  values of shell options saved by `local -' by calling set_shellopts().
+	  Report from Grisha Levit <grishalevit@gmail.com>
+
+flags.c
+	- reset_shell_flags: set histexp_flag to 0 and let bash_history_reinit
+	  take care of setting history_expansion appropriately. Report and fix
+	  from Grisha Levit <grishalevit@gmail.com>
+
+				   7/28
+				   ----
+general.c
+	- assignment: if (FLAGS & 1), we are parsing the contents of a compound
+	  assignment, and a word must begin with a `[' and have a valid
+	  subscript terminated by `]' before the `=' to be considered an
+	  assignment statemen and subsequently expanded like one. Report from 
+	  Alexey Izbyshev <izbyshev@ispras.ru>
+
+				   7/30
+				   ----
+lib/glob/sm_loop.c
+	- BRACKMATCH: if the bracket expression is matching simple characters
+	  and not a range, compare the character from the string and the
+	  pattern directly, as required by Posix interp 948
+
+lib/glob/smatch.c
+	- charcmp_wc: split off code that calls wcscoll from rangecmp_wc,
+	  just return the results of wcscoll
+	- rangecmp_wc: call charcmp_wc and impose a total ordering
+	  by performing a byte comparison (or wint_t comparison) of C1 and C2
+	  as required by Posix interp 948 (charcmp_wc takes care of the
+	  behavior of FORCECOLL)
+	- collequiv_wc: call charcmp_wc instead of rangecmp_wc
+	- charcmp: character comparison code from rangecmp
+	- rangecmp: call charcmp and impose total ordering as required by
+	  Posix interp 948
+	- collequiv: call charcmp instead of rangecmp
+	- _fnmatch_fallback: ASCII version of fallback for equivalence classes
+	  when there are no multibyte characters in the pattern; just calls
+	  fnmatch with a reconstructed equivalence class pattern
+	- collequiv: call _fnmatch_fallback if charcmp returns non-zero and
+	  the configure check indicates fnmatch has character class support.
+	  Fixes issue reported by Harald van Dijk <harald@gigawatt.nl>
+
+				    8/2
+				    ---
+lib/readline/signals.c
+	- _rl_handle_signal: since we're not called in a signal handler context
+	  any more, we don't need to explicitly unblock the signal we received
+	  so the application's signal handler will get it when we resend the
+	  signal to ourselves. It doesn't hurt anything to do it, but we don't
+	  have to
+	- _rl_handle_signal: Set up a framework for any signals that need to
+	  be blocked during cleanup: add the signal to SET (initialized to the
+	  existing set of blocked signals) and set BLOCK_SIG to 1. We block
+	  that set around the call to rl_cleanup_after_signal().
+	- _rl_handle_signal: on AIX, if the signal is SIGHUP, make sure we
+	  block SIGHUP while running rl_cleanup_after_signal()
+
+				    8/3
+				    ---
+jobs.c
+	- start_job: don't allow `fg' or `bg' in a command substitution to
+	  attempt to start a parent's jobs. Suggested by  OÄuz 
+	  <oguzismailuysal@gmail.com>
+
+builtins/set.def
+	- set_current_options: only call change_flag or SET_BINARY_O_OPTION_VALUE
+	  if the value has changed from what is stored in the bitmap, to avoid
+	  any side effects from setting the options and save time on any
+	  unnecessary function calls. Inspired by report from Grisha Levit
+	  <grishalevit@gmail.com>
+
+parse.y
+	- xparse_dolparen: before we jump to top level, check whether we are
+	  still reading from the string (we might have run all the unwind-
+	  protects) and turn off PST_CMDSUBST if we are not. Fixes fuzzing
+	  bug reported by Jakub Wilk <jwilk@jwilk.net>
+
+				    8/4
+				    ---
+subst.c
+	- process_substitute: set subshell_environment to include SUBSHELL_ASYNC
+	  in the child process, since we passed FORK_ASYNC to make_child. Fixes
+	  DEBUG trap problem reported by Jonathan Rascher <jon@bcat.name>
+
+subst.c
+	- unlink_all_fifos: new function, just unconditionally closes and
+	  unlinks (if using FIFOs) each pipe used for process substitution.
+	  There is an open to unblock any child processes sleeping on the
+	  FIFO first. Inspired by a suggestion from "CHIGOT, CLEMENT"
+	  <clement.chigot@atos.net>
+
+shell.c
+	- exit_shell: call unlink_all_fifos() instead of unlink_fifo_list()
+
+sig.c
+	- termsig_handler: call unlink_all_fifos() instead of
+	  unlink_fifo_list()
+
+				    8/5
+				    ---
+arrayfunc.c
+	- quote_compound_array_list: turn empty strings into '' instead of
+	  leaving them unmodified. Fixes bug in changes from 4/29 reported
+	  by andy_bash <andy_bash@objectmail.com>
+
+				   8/10
+				   ----
+bashline.c
+	- edit_and_execute_command,bash_execute_unix_command: restore the bash
+	  signal handlers before running parse_and_execute() so bash will catch
+	  and handle signals, instead of letting readline catch them without
+	  any opportunity to run _rl_handle_signal(). Fixes bug reported by
+	  Stan Marsh <gazelle@xmission.com>
+
+				   8/11
+				   ----
+builtins/fc.def
+	- fc_gethnum: return HIST_INVALID for -0 if not in listing mode
+	- fc_builtin: throw an out-of-range error if histbeg or histend gets
+	  set to HIST_INVALID
+	- fc_builtin: don't throw errors for other out-of-range history
+	  specifications, clamp them at the beginning or end of the history
+	  list, as appropriate, per POSIX. Report and fix from Martijn Dekker
+	  <martijn@inlv.org>
+
+				   8/12
+				   ----
+builtins/fc.def
+	- fc_gethnum: return HIST_NOTFOUND (new error) if the string is not a
+	  number and doesn't correspond to any command in the history list
+	- fc_builtin: print a "no command found" error message if fc_gethnum
+	  returns HIST_NOTFOUND
+
+				   8/14
+				   ----
+flags.c
+	- no_invisible_vars: removed undocumented `-I' flag
+
+{flags,variables}.c,flags.h,builtins/{declare,setattr.def}
+	- no_invisible_vars: remove all references
+
+command.h
+	- PF_ALLINDS: new flag, means to expand an array variable name without
+	  a subscript as if it were subscripted by `@' instead of `0'
+
+subst.c
+	- parameter_brace_expand_word: if PFLAGS contains PF_ALLINDS, expand
+	  an array variable name as if it were subscripted by "@" instead of
+	  0/"0": a string with the element values separated by " ". Little
+	  nuance; we're just interested in whether or not there are any
+	  values at all
+	- parameter_brace_expand: if we are expanding something like ${foo@a},
+	  pass PF_ALLINDS to parameter_brace_expand_word and
+	  parameter_brace_expand_indir so we don't get tripped up on `nounset'
+	  if foo has an assigned subscript other than 0/"0". Inspired by a
+	  report from Andrew Neff <andrew.neff@visionsystemsinc.com>
+
+				   8/17
+				   ----
+bashhist.c
+	- bash_add_history,maybe_add_history: don't need to call shell_comment
+	  if we are in the middle of adding a here-document, since it may
+	  call the parser recursively on data that is not guaranteed to be
+	  valid input. From a report by Hyunho Cho <mug896@gmail.com>
+
+				   8/24
+				   ----
+lib/readline/complete.c
+	- compare_match: compare TEXT from the line buffer and MATCH, a
+	  possible completion for TEXT, after dequoting TEXT if necessary
+	- rl_complete_internal,rl_menu_complete : if show-all-if-unmodified is
+	  set, use compare_match instead of a straight strcmp to determine if
+	  the match has changed the text to complete, so we can use it for
+	  filenames that require quoting. Report and pointer to fix from
+	  Abon B <gnuabonbon@gmail.com>
+
+				   8/25
+				   ----
+eval.c
+	- execute_prompt_command: PROMPT_COMMAND can now be an array, subsuming
+	  PROMPT_COMMANDS, which bash no longer looks for. Prompted by a
+	  suggestion from Martijn Dekker <martijn@inlv.org>
+
+				   8/26
+				   ----
+builtins/fc.def
+	- fc_gethnum: now takes a flags word as the third argument, with two
+	  current flag values: HN_LISTING, which means we are listing history
+	  entries, and HN_FIRST, which means we are parsing the first in a
+	  first,last range of history entries
+	- fc_gethnum: if we have a number >= 0, and it's out of range, return
+	  different values (0 or last history) depending on whether we are
+	  parsing the first or last in a range argument. Based on a report from
+	  Martijn Dekker <martijn@inlv.org>
+
+				   8/31
+				   ----
+parse.y
+	- grammar: call handle_eof_input_unit from the eof-after-error
+	  production only from interactive top-level shells, so a syntax error
+	  in `eval' doesn't exit an interactive shell. Report and fix from
+	  Koichi Murase <myoga.murase@gmail.com>
+
+bashline.c
+	- bash_execute_unix_command: if we call parse_and_execute with allocated
+	  memory, make sure not to include SEVAL_NOFREE in the flags so it will
+	  free that command string before returning. Report and fix from
+	  Koichi Murase <myoga.murase@gmail.com>
+
+array.[ch]
+	- array_to_argv: now takes a second argument: COUNTP; returns the number
+	  of elements stored in the strvec
+	- array_to_argv: don't store array elements with null values; it makes
+	  it hard for callers to walk the whole array reliably
+
+pcomplete.c
+	- gen_shell_function_matches: change call to array_to_argv
+
+array.h
+	- execute_array_command: now takes the entire ARRAY * as the first
+	  parameter
+
+eval.c
+	- execute_array_command: now takes the entire array, puts the elements
+	  into a strvec, and executes each element of the strvevc as a command.
+	  This protects against a command from PROMPT_COMMAND[n] unsetting the
+	  corresponding element of PROMPT_COMMAND.
+	  From a report from Koichi Murase <myoga.murase@gmail.com>
+
+				    9/7
+				    ---
+[bash-5.1-beta frozen]
+
+				    9/8
+				    ---
+lib/readline/display.c
+	- _rl_update_final: don't bother doing anything if the line structures
+	  have not been initialized. Report and fix from gary@catalyst.net.nz
+
+variables.c
+	- get_histcmd: perform the same adjustment as in prompt_history_number;
+	  make sure to subtract one if we're doing this while executing a
+	  command that has already been saved to the history list. Inspired
+	  by a report from L A Walsh <bash@tlinx.org>
+
+				   9/14
+				   ----
+aclocal.m4
+	- BASH_STRUCT_WEXITSTATUS_OFFSET: fix typo in loop condition reported
+	  by Andreas K. Hüttel <dilfridge@gentoo.org>
+
+syntax.h
+	- slashify_in_here_document: restore previous value that doesn't
+	  include double quote, since it's only special in certain cases
+
+subst.c
+	- expand_word_internal: when processing backslash-double quote inside
+	  a ${...} construct inside a here documemt, treat it the same as if
+	  it were double-quoted, as posix says. Fixes report from
+	  Andreas Schwab <schwab@linux-m68k.org>
+
+				   9/15
+				   ----
+support/signames.c
+	- added a number of more esoteric signal names from AIX and Solaris
+
+parse.y
+	- report_syntax_error: make sure that the exit status is only set to
+	  one of the special builtin exit statuses if we are really executing
+	  a builtin here, not just if parse_and_execute_level > 0. Reported by
+	  Rob Landley <rob@landley.net>
+
+execute_cmd.c
+	- EX_BADSYNTAX: make sure that gets translated into EX_BADUSAGE (2)
+	- execute_simple_command: if a function returns a value greater than
+	  EX_SHERRBASE, use builtin_status to translate it, as if a builtin
+	  were being executed
+	- builtin_status: make sure a status > EX_SHERRBASE gets translated to
+	  EXECUTION_FAILURE
+
+				   9/21
+				   ----
+subst.c
+	- process_substitute: set up input from /dev/null (standard for an
+	  asynchronous process) only if the shell is interactive and reading
+	  input from the terminal. This allows scripts to use process
+	  substitution to filter stdin. From a report from
+	  Andreas Schwab <schwab@linux-m68k.org>
+
+				   9/23
+				   ----
+doc/{bash.1,bashref.texi}
+	- ENV: a couple of changes clarifying that it's only used when an
+	  interactive shell is started in posix mode. Report from
+	  Reuben Thomas <rrt@sc3d.org>
+
+examples/loadables/asort.c
+	- asort: loadable builtin to sort an array. Contributed by
+	  Geir Hauge <geir.hauge@gmail.com>
+
+				   10/1
+				   ----
+
+[bash-5.1-rc1 frozen]
+
+				   10/7
+				   ----
+subst.c
+	- process_substitute: try it without setting the stdin for a process
+	  substitution started from an interactive shell to /dev/null. We will
+	  have to see if this causes problems like those reported back in
+	  9/2019 by Grisha Levit. From a report by Hyunho Cho <mug896@gmail.com>
+
+lib/readline/terminal.c
+	- _rl_init_terminal_io: if the terminal is unknown, disable bracketed
+	  paste on the assumption it can't handle the enable/disable escape
+	  sequences
+
+				   10/8
+				   ----
+lib/readline/terminal.c
+	- _rl_init_terminal_io: if the terminal name is "dumb", disable
+	  bracketed paste mode. Suggested by
+	  Andreas Schwab <schwab@linux-m68k.org>
+
+				   10/13
+				   -----
+trap.[ch]
+	- set_trap_state: new function to allow other signal handlers to set
+	  the internal state that trap_handler would set to note that the
+	  shell received a trapped signal. Used by sigint_sighandler().
+
+sig.c
+	- sigint_sighandler: call set_trap_state to set the pending trap state
+	  for SIGINT if trap_handler is not called. Needed because
+	  throw_to_top_level now checks whether a signal is pending before
+	  running the trap (change from 4/2020)
+
+builtins/trap.def
+	- trap_builtin: if the shell is interactive (interactive_shell != 0)
+	  but running something like PROMPT_COMMAND that sets
+	  parse_and_execute_level > 0 but interactive == 0, make sure to set
+	  the signal handler to the default interactive shell SIGINT handler
+	  (sigint_sighandler) instead of the default non-interactive one.
+	  Fixes bug reported by Daniel Farina <daniel@fdr.io> with a hint
+	  from felix <felix@f-hauri.ch>
+
+				   10/26
+				   -----
+
+lib/readline/{readline.c,rlprivate.h}
+	- _rl_enable_active_region: new variable, mirrors value of
+	  _rl_enable_bracketed_paste
+	- BRACKETED_PASTE_DEFAULT: new define, default initial value of
+	  _rl_enable_bracketed_paste and _rl_enable_active_region
+
+lib/readline/bind.c
+	- hack_special_boolean_var: make sure that _rl_enable_active_region
+	  is set appropriately when "enable-bracketed-paste" is modified
+
+lib/readline/isearch.c
+	- _rl_isearch_dispatch: make sure that we activate the mark on finding
+	  the search string only if _rl_enable_active_region is non-zero, even
+	  if bracketed paste is enabled
+
+lib/readline/search.c
+	- noninc_dosearch: make sure that we activate the mark on finding
+	  the search string only if _rl_enable_active_region is non-zero, even
+	  if bracketed paste is enabled
+
+lib/readline/kill.c
+	- rl_bracketed_paste_begin: make sure we activate the mark only if
+	  _rl_enable_active_region is enabled
+
+lib/readline/isearch.c
+	- _rl_isearch_dispatch: the requirement for number of available unread
+	  characters (bytes) to trigger the bracketed paste test is now
+	  BRACK_PASTE_SLEN-1, like for non-incremental searches
+
+				   10/29
+				   -----
+
+doc/bash.1,lib/readline/rluser.texi
+	- enable-bracketed-paste: change to note the the current default is `On'
+
+				   10/30
+				   -----
+lib/glob/glob.c
+	- wdequote_pathname: if wcsrtombs fails, make sure to check whether it
+	  leaves wpathname set to a non-NULL value before checking whether or
+	  not *wpathname is a null character (indicating an incomplete
+	  conversion). Fixes https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=972286
+	  with an assist from Bernhard Ãœbelacker <bernhardu@mailbox.org>
+
+				   11/1
+				   ----
+lib/readline/isearch.c
+	- _rl_isearch_dispatch: when checking whether the current character is
+	  one of the isearch `opcodes', only check the multibyte character
+	  member of CXT if we're currently running in a multibyte locale. Don't
+	  assume that other parts of the code will set mb[0] = c and mb[1] = 0.
+	  Report from Detlef Vollmann <dv@vollmann.ch>
+
+[bash-5.1-rc2 frozen]
+
+				   11/10
+				   -----
+lib/readline/isearch.c
+	- _rl_isearch_dispatch: if we are aborting the search, make sure to
+	  call _rl_fix_point and to make sure the point and mark are less
+	  than the new rl_end, in case they got out of sync. Report and fix
+	  from Tillmann Osswald <tosswald@ernw.de>
+
+test.c
+	- unary_test: assume the argument has already been expanded (the code
+	  paths for [[ and [ expand it) and add AV_NOEXPAND to the flags passed
+	  to array_value if assoc_expand_once is enabled. Prompted by a report
+	  from Greg Wooledge <wooledg@eeg.ccf.org>
+
+[bash-5.1-rc3 frozen]
+
+				   11/18
+				   -----
+doc/{bash.1,bashref.texi}
+	- small tweaks to the ulimit description to make it more consistent with
+	  the Posix standard's terminology
+
+				   12/4
+				   ----
+
+[bash-5.1-release frozen]
diff --git a/CWRU/misc/bison b/CWRU/misc/bison
new file mode 100755
index 0000000..58aae79
--- /dev/null
+++ b/CWRU/misc/bison
@@ -0,0 +1,26 @@
+#! /bin/sh
+#
+# bison -- just call yacc
+#
+
+# Copyright (C) 1996-2002 Free Software Foundation, Inc.
+#
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+if [ "$1" = '-y' ]; then
+	shift
+fi
+
+exec /usr/bin/yacc ${1+"$@"}
diff --git a/CWRU/misc/errlist.c b/CWRU/misc/errlist.c
new file mode 100644
index 0000000..53c368d
--- /dev/null
+++ b/CWRU/misc/errlist.c
@@ -0,0 +1,57 @@
+/*
+ * If necessary, link with lib/sh/libsh.a
+ */
+
+/* Copyright (C) 1998-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdio.h>
+#include <errno.h>
+
+extern char *strerror();
+
+extern int sys_nerr;
+
+int
+main(c, v)
+int	c;
+char	**v;
+{
+	int	i, n;
+
+	if (c == 1) {
+		for (i = 1; i < sys_nerr; i++)
+			printf("%d --> %s\n", i, strerror(i));
+	} else {
+		for (i = 1; i < c; i++) {
+			n = atoi(v[i]);
+			printf("%d --> %s\n", n, strerror(n));
+		}
+	}
+	exit (0);
+}
+
+programming_error(a, b)
+char	*a;
+int	b;
+{
+}
+
+fatal_error()
+{
+}
diff --git a/CWRU/misc/hpux10-dlfcn.h b/CWRU/misc/hpux10-dlfcn.h
new file mode 100644
index 0000000..49d4428
--- /dev/null
+++ b/CWRU/misc/hpux10-dlfcn.h
@@ -0,0 +1,63 @@
+/*
+ * HPUX 10.x stubs to implement dl* in terms of shl*
+ *
+ * Not needed for later versions; HPUX 11.x has dlopen() and friends.
+ *
+ * configure also needs to be faked out.  You can create a dummy libdl.a
+ * with stub entries for dlopen, dlclose, dlsym, and dlerror:
+ *
+ *	int dlopen() { return(0);}
+ *	int dlclose() { return(0);}
+ *	int dlsym() { return(0);}
+ *	int dlerror() { return(0);}
+ *
+ * This has not been tested; I just read the manual page and coded this up.
+ *
+ * According to the ld manual page, you need to link bash with -dld and add
+ * the -E flag to LOCAL_LDFLAGS.
+ */
+
+/* Copyright (C) 1998-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (__HPUX10_DLFCN_H__)
+
+#define __HPUX10_DLFCN_H__
+
+#include <dl.h>
+#include <errno.h>
+
+#ifndef errno
+extern int errno;
+#endif
+
+#define RTLD_LAZY BIND_DEFERRED
+#define RTLD_NOW BIND_IMMEDIATE
+#define RTLD_GLOBAL DYNAMIC_PATH
+
+char *bash_global_sym_addr;
+
+#define dlopen(file,mode) (void *)shl_load((file), (mode), 0L)
+
+#define dlclose(handle) shl_unload((shl_t)(handle))
+
+#define dlsym(handle,name) (bash_global_sym_addr=0,shl_findsym((shl_t *)&(handle),name,TYPE_UNDEFINED,&bash_global_sym_addr), (void *)bash_global_sym_addr)
+
+#define dlerror() strerror(errno)
+
+#endif /*  __HPUX10_DLFCN_H__ */
diff --git a/CWRU/misc/open-files.c b/CWRU/misc/open-files.c
new file mode 100644
index 0000000..6a55577
--- /dev/null
+++ b/CWRU/misc/open-files.c
@@ -0,0 +1,39 @@
+/* open-files -- report files a process has open */
+
+/* Copyright (C) 1989-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <sys/types.h>
+#include <fcntl.h>
+#include <sys/file.h>
+
+#include <unistd.h>
+#include <stdlib.h>
+
+#include <stdio.h>
+
+main()
+{
+	register int	i;
+
+	for (i = 0; i < getdtablesize(); i++) {
+		if (fcntl(i, F_GETFD, 0) != -1)
+			fprintf(stderr, "fd %d: open\n", i);
+	}
+	exit(0);
+}
diff --git a/CWRU/misc/sigs.c b/CWRU/misc/sigs.c
new file mode 100644
index 0000000..bae93f8
--- /dev/null
+++ b/CWRU/misc/sigs.c
@@ -0,0 +1,47 @@
+/* sigs - print signal dispositions for a process */
+
+/* Copyright (C) 1990-2010 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <signal.h>
+#include <stdio.h>
+
+extern const char	* const sys_siglist[];
+
+typedef void	sighandler();
+
+main(argc, argv)
+int	argc;
+char	**argv;
+{
+	register int	i;
+	sighandler	*h;
+
+	for (i = 1; i < NSIG; i++) {
+		h = signal(i, SIG_DFL);
+		if (h != SIG_DFL) {
+			if (h == SIG_IGN)
+				fprintf(stderr, "%d: ignored (%s)\n", i, sys_siglist[i]);
+			else
+				fprintf(stderr, "%d: caught (%s)\n", i, sys_siglist[i]);
+		}
+	}
+	exit(0);
+}
+
+		
diff --git a/CWRU/misc/sigstat.c b/CWRU/misc/sigstat.c
new file mode 100644
index 0000000..9135baa
--- /dev/null
+++ b/CWRU/misc/sigstat.c
@@ -0,0 +1,226 @@
+/*
+ * sigstat - print out useful information about signal arguments
+ *
+ * Chet Ramey
+ * chet@po.cwru.edu
+ */
+
+/* Copyright (C) 1991-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <sys/types.h>
+#include <signal.h>
+#include <stdio.h>
+
+extern char	*strrchr();
+static char	*signames[NSIG];
+
+char	*progname;
+
+void	sigstat();
+
+main(argc, argv)
+int	argc;
+char	**argv;
+{
+	register int	i;
+	char	*t;
+
+	if (t = strrchr(argv[0], '/'))
+		progname = ++t;
+	else
+		progname = argv[0];
+	init_signames();
+	if (argc == 1) {
+		for (i = 1; i < NSIG; i++)
+			sigstat(i);
+		exit(0);
+	}
+	for (i = 1; i < argc; i++)
+		sigstat(atoi(argv[i]));
+	exit(0);
+}
+
+void
+sigstat(sig)
+int	sig;
+{
+	struct sigaction oact;
+	char *signame;
+	sigset_t set, oset;
+	int blocked;
+
+	if (sig < 0 || sig >= NSIG) {
+		fprintf(stderr, "%s: %d: signal out of range\n", progname, sig);
+		return;
+	}
+	signame = signames[sig];
+	sigemptyset(&oset);
+	sigprocmask(SIG_BLOCK, (sigset_t *)NULL, &oset);
+	if (sigismember(&oset, sig))
+		printf("%s: signal is blocked\n", signame);
+	sigaction(sig, (struct sigaction *)NULL, &oact);
+	if (oact.sa_handler == SIG_IGN)
+		printf("%s: signal is ignored\n", signame);
+	else if (oact.sa_handler == SIG_DFL)
+		printf("%s: signal is defaulted\n", signame);
+	else
+		printf("%s: signal is trapped (?)\n", signame);
+}
+
+init_signames()
+{
+	register int i;
+	bzero(signames, sizeof(signames));
+
+#if defined (SIGHUP)		/* hangup */
+  	signames[SIGHUP] = "SIGHUP";
+#endif
+#if defined (SIGINT)		/* interrupt */
+  	signames[SIGINT] = "SIGINT";
+#endif
+#if defined (SIGQUIT)		/* quit */
+  	signames[SIGQUIT] = "SIGQUIT";
+#endif
+#if defined (SIGILL)		/* illegal instruction (not reset when caught) */
+  	signames[SIGILL] = "SIGILL";
+#endif
+#if defined (SIGTRAP)		/* trace trap (not reset when caught) */
+  	signames[SIGTRAP] = "SIGTRAP";
+#endif
+#if defined (SIGABRT)		/*  */
+  	signames[SIGABRT] = "SIGABRT";
+#endif
+#if defined (SIGIOT)		/* IOT instruction */
+  	signames[SIGIOT] = "SIGIOT";
+#endif
+#if defined (SIGEMT)		/* EMT instruction */
+  	signames[SIGEMT] = "SIGEMT";
+#endif
+#if defined (SIGFPE)		/* floating point exception */
+  	signames[SIGFPE] = "SIGFPE";
+#endif
+#if defined (SIGKILL)		/* kill (cannot be caught or ignored) */
+  	signames[SIGKILL] = "SIGKILL";
+#endif
+#if defined (SIGBUS)		/* bus error */
+  	signames[SIGBUS] = "SIGBUS";
+#endif
+#if defined (SIGSEGV)		/* segmentation violation */
+  	signames[SIGSEGV] = "SIGSEGV";
+#endif
+#if defined (SIGSYS)		/* bad argument to system call */
+  	signames[SIGSYS] = "SIGSYS";
+#endif
+#if defined (SIGPIPE)		/* write on a pipe with no one to read it */
+  	signames[SIGPIPE] = "SIGPIPE";
+#endif
+#if defined (SIGALRM)		/* alarm clock */
+  	signames[SIGALRM] = "SIGALRM";
+#endif
+#if defined (SIGTERM)		/* software termination signal from kill */
+  	signames[SIGTERM] = "SIGTERM";
+#endif
+#if defined (SIGCLD)		/* Like SIGCHLD.  */
+  	signames[SIGCLD] = "SIGCLD";
+#endif
+#if defined (SIGPWR)		/* Magic thing for some machines. */
+  	signames[SIGPWR] = "SIGPWR";
+#endif
+#if defined (SIGPOLL)		/* For keyboard input?  */
+  	signames[SIGPOLL] = "SIGPOLL";
+#endif
+#if defined (SIGURG)		/* urgent condition on IO channel */
+  	signames[SIGURG] = "SIGURG";
+#endif
+#if defined (SIGSTOP)		/* sendable stop signal not from tty */
+  	signames[SIGSTOP] = "SIGSTOP";
+#endif
+#if defined (SIGTSTP)		/* stop signal from tty */
+  	signames[SIGTSTP] = "SIGTSTP";
+#endif
+#if defined (SIGCONT)		/* continue a stopped process */
+  	signames[SIGCONT] = "SIGCONT";
+#endif
+#if defined (SIGCHLD)		/* to parent on child stop or exit */
+  	signames[SIGCHLD] = "SIGCHLD";
+#endif
+#if defined (SIGTTIN)		/* to readers pgrp upon background tty read */
+  	signames[SIGTTIN] = "SIGTTIN";
+#endif
+#if defined (SIGTTOU)		/* like TTIN for output if (tp->t_local&LTOSTOP) */
+  	signames[SIGTTOU] = "SIGTTOU";
+#endif
+#if defined (SIGIO)		/* input/output possible signal */
+  	signames[SIGIO] = "SIGIO";
+#endif
+#if defined (SIGXCPU)		/* exceeded CPU time limit */
+  	signames[SIGXCPU] = "SIGXCPU";
+#endif
+#if defined (SIGXFSZ)		/* exceeded file size limit */
+  	signames[SIGXFSZ] = "SIGXFSZ";
+#endif
+#if defined (SIGVTALRM)		/* virtual time alarm */
+  	signames[SIGVTALRM] = "SIGVTALRM";
+#endif
+#if defined (SIGPROF)		/* profiling time alarm */
+  	signames[SIGPROF] = "SIGPROF";
+#endif
+#if defined (SIGWINCH)		/* window changed */
+  	signames[SIGWINCH] = "SIGWINCH";
+#endif
+#if defined (SIGLOST)		/* resource lost (eg, record-lock lost) */
+  	signames[SIGLOST] = "SIGLOST";
+#endif
+#if defined (SIGUSR1)		/* user defined signal 1 */
+  	signames[SIGUSR1] = "SIGUSR1";
+#endif
+#if defined (SIGUSR2)		/* user defined signal 2 */
+  	signames[SIGUSR2] = "SIGUSR2";
+#endif
+#if defined (SIGMSG)	/* HFT input data pending */
+  	signames[SIGMSG] = "SIGMSG";
+#endif
+#if defined (SIGPWR)	/* power failure imminent (save your data) */
+  	signames[SIGPWR] = "SIGPWR";
+#endif
+#if defined (SIGDANGER)	/* system crash imminent */
+  	signames[SIGDANGER] = "SIGDANGER";
+#endif
+#if defined (SIGMIGRATE)	/* migrate process to another CPU */
+  	signames[SIGMIGRATE] = "SIGMIGRATE";
+#endif
+#if defined (SIGPRE)	/* programming error */
+  	signames[SIGPRE] = "SIGPRE";
+#endif
+#if defined (SIGGRANT)	/* HFT monitor mode granted */
+  	signames[SIGGRANT] = "SIGGRANT";
+#endif
+#if defined (SIGRETRACT)	/* HFT monitor mode retracted */
+  	signames[SIGRETRACT] = "SIGRETRACT";
+#endif
+#if defined (SIGSOUND)	/* HFT sound sequence has completed */
+  	signames[SIGSOUND] = "SIGSOUND";
+#endif
+
+	for (i = 0; i < NSIG; i++)
+		if (signames[i] == (char *)NULL) {
+			signames[i] = (char *)malloc (16);;
+			sprintf (signames[i], "signal %d", i);
+	  	}
+}
diff --git a/CWRU/sh-redir-hack b/CWRU/sh-redir-hack
new file mode 100644
index 0000000..413b297
--- /dev/null
+++ b/CWRU/sh-redir-hack
@@ -0,0 +1,15 @@
+Add to `subshell' production in parse.y and recompile -DREDIRECTION_HACK to
+get `< xx (command)' sh compatibility.
+
+	|	redirections '(' list ')'
+			{
+#if defined (REDIRECTION_HACK)
+			  /* XXX - C News sh compatibility hack - XXX */
+			  $3->redirects = $1;
+			  $3->flags |= CMD_WANT_SUBSHELL;
+			  $$ = $3;
+#else
+			  yyerror ();
+			  YYABORT;
+#endif
+			}
diff --git a/ChangeLog b/ChangeLog
new file mode 120000
index 0000000..12c9a28
--- /dev/null
+++ b/ChangeLog
@@ -0,0 +1 @@
+CWRU/changelog
\ No newline at end of file
diff --git a/INSTALL b/INSTALL
new file mode 100644
index 0000000..91f1dd9
--- /dev/null
+++ b/INSTALL
@@ -0,0 +1,445 @@
+Basic Installation
+==================
+
+These are installation instructions for Bash.
+
+The simplest way to compile Bash is:
+
+  1. 'cd' to the directory containing the source code and type
+     './configure' to configure Bash for your system.  If you're using
+     'csh' on an old version of System V, you might need to type 'sh
+     ./configure' instead to prevent 'csh' from trying to execute
+     'configure' itself.
+
+     Running 'configure' takes some time.  While running, it prints
+     messages telling which features it is checking for.
+
+  2. Type 'make' to compile Bash and build the 'bashbug' bug reporting
+     script.
+
+  3. Optionally, type 'make tests' to run the Bash test suite.
+
+  4. Type 'make install' to install 'bash' and 'bashbug'.  This will
+     also install the manual pages and Info file.
+
+The 'configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a 'Makefile' in each directory of the package
+(the top directory, the 'builtins', 'doc', and 'support' directories,
+each directory under 'lib', and several others).  It also creates a
+'config.h' file containing system-dependent definitions.  Finally, it
+creates a shell script named 'config.status' that you can run in the
+future to recreate the current configuration, a file 'config.cache' that
+saves the results of its tests to speed up reconfiguring, and a file
+'config.log' containing compiler output (useful mainly for debugging
+'configure').  If at some point 'config.cache' contains results you
+don't want to keep, you may remove or edit it.
+
+To find out more about the options and arguments that the 'configure'
+script understands, type
+
+     bash-4.2$ ./configure --help
+
+at the Bash prompt in your Bash source directory.
+
+If you want to build Bash in a directory separate from the source
+directory - to build for multiple architectures, for example - just use
+the full path to the configure script.  The following commands will
+build bash in a directory under '/usr/local/build' from the source code
+in '/usr/local/src/bash-4.4':
+
+     mkdir /usr/local/build/bash-4.4
+     cd /usr/local/build/bash-4.4
+     bash /usr/local/src/bash-4.4/configure
+     make
+
+See *note Compiling For Multiple Architectures:: for more information
+about building in a directory separate from the source.
+
+If you need to do unusual things to compile Bash, please try to figure
+out how 'configure' could check whether or not to do them, and mail
+diffs or instructions to <bash-maintainers@gnu.org> so they can be
+considered for the next release.
+
+The file 'configure.ac' is used to create 'configure' by a program
+called Autoconf.  You only need 'configure.ac' if you want to change it
+or regenerate 'configure' using a newer version of Autoconf.  If you do
+this, make sure you are using Autoconf version 2.50 or newer.
+
+You can remove the program binaries and object files from the source
+code directory by typing 'make clean'.  To also remove the files that
+'configure' created (so you can compile Bash for a different kind of
+computer), type 'make distclean'.
+
+Compilers and Options
+=====================
+
+Some systems require unusual options for compilation or linking that the
+'configure' script does not know about.  You can give 'configure'
+initial values for variables by setting them in the environment.  Using
+a Bourne-compatible shell, you can do that on the command line like
+this:
+
+     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+
+On systems that have the 'env' program, you can do it like this:
+
+     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+
+The configuration process uses GCC to build Bash if it is available.
+
+Compiling For Multiple Architectures
+====================================
+
+You can compile Bash for more than one kind of computer at the same
+time, by placing the object files for each architecture in their own
+directory.  To do this, you must use a version of 'make' that supports
+the 'VPATH' variable, such as GNU 'make'.  'cd' to the directory where
+you want the object files and executables to go and run the 'configure'
+script from the source directory (*note Basic Installation::).  You may
+need to supply the '--srcdir=PATH' argument to tell 'configure' where
+the source files are.  'configure' automatically checks for the source
+code in the directory that 'configure' is in and in '..'.
+
+If you have to use a 'make' that does not supports the 'VPATH' variable,
+you can compile Bash for one architecture at a time in the source code
+directory.  After you have installed Bash for one architecture, use
+'make distclean' before reconfiguring for another architecture.
+
+Alternatively, if your system supports symbolic links, you can use the
+'support/mkclone' script to create a build tree which has symbolic links
+back to each file in the source directory.  Here's an example that
+creates a build directory in the current directory from a source
+directory '/usr/gnu/src/bash-2.0':
+
+     bash /usr/gnu/src/bash-2.0/support/mkclone -s /usr/gnu/src/bash-2.0 .
+
+The 'mkclone' script requires Bash, so you must have already built Bash
+for at least one architecture before you can create build directories
+for other architectures.
+
+Installation Names
+==================
+
+By default, 'make install' will install into '/usr/local/bin',
+'/usr/local/man', etc.  You can specify an installation prefix other
+than '/usr/local' by giving 'configure' the option '--prefix=PATH', or
+by specifying a value for the 'DESTDIR' 'make' variable when running
+'make install'.
+
+You can specify separate installation prefixes for architecture-specific
+files and architecture-independent files.  If you give 'configure' the
+option '--exec-prefix=PATH', 'make install' will use PATH as the prefix
+for installing programs and libraries.  Documentation and other data
+files will still use the regular prefix.
+
+Specifying the System Type
+==========================
+
+There may be some features 'configure' can not figure out automatically,
+but need to determine by the type of host Bash will run on.  Usually
+'configure' can figure that out, but if it prints a message saying it
+can not guess the host type, give it the '--host=TYPE' option.  'TYPE'
+can either be a short name for the system type, such as 'sun4', or a
+canonical name with three fields: 'CPU-COMPANY-SYSTEM' (e.g.,
+'i386-unknown-freebsd4.2').
+
+See the file 'support/config.sub' for the possible values of each field.
+
+Sharing Defaults
+================
+
+If you want to set default values for 'configure' scripts to share, you
+can create a site shell script called 'config.site' that gives default
+values for variables like 'CC', 'cache_file', and 'prefix'.  'configure'
+looks for 'PREFIX/share/config.site' if it exists, then
+'PREFIX/etc/config.site' if it exists.  Or, you can set the
+'CONFIG_SITE' environment variable to the location of the site script.
+A warning: the Bash 'configure' looks for a site script, but not all
+'configure' scripts do.
+
+Operation Controls
+==================
+
+'configure' recognizes the following options to control how it operates.
+
+'--cache-file=FILE'
+     Use and save the results of the tests in FILE instead of
+     './config.cache'.  Set FILE to '/dev/null' to disable caching, for
+     debugging 'configure'.
+
+'--help'
+     Print a summary of the options to 'configure', and exit.
+
+'--quiet'
+'--silent'
+'-q'
+     Do not print messages saying which checks are being made.
+
+'--srcdir=DIR'
+     Look for the Bash source code in directory DIR.  Usually
+     'configure' can determine that directory automatically.
+
+'--version'
+     Print the version of Autoconf used to generate the 'configure'
+     script, and exit.
+
+'configure' also accepts some other, not widely used, boilerplate
+options.  'configure --help' prints the complete list.
+
+Optional Features
+=================
+
+The Bash 'configure' has a number of '--enable-FEATURE' options, where
+FEATURE indicates an optional part of Bash.  There are also several
+'--with-PACKAGE' options, where PACKAGE is something like 'bash-malloc'
+or 'purify'.  To turn off the default use of a package, use
+'--without-PACKAGE'.  To configure Bash without a feature that is
+enabled by default, use '--disable-FEATURE'.
+
+Here is a complete list of the '--enable-' and '--with-' options that
+the Bash 'configure' recognizes.
+
+'--with-afs'
+     Define if you are using the Andrew File System from Transarc.
+
+'--with-bash-malloc'
+     Use the Bash version of 'malloc' in the directory 'lib/malloc'.
+     This is not the same 'malloc' that appears in GNU libc, but an
+     older version originally derived from the 4.2 BSD 'malloc'.  This
+     'malloc' is very fast, but wastes some space on each allocation.
+     This option is enabled by default.  The 'NOTES' file contains a
+     list of systems for which this should be turned off, and
+     'configure' disables this option automatically for a number of
+     systems.
+
+'--with-curses'
+     Use the curses library instead of the termcap library.  This should
+     be supplied if your system has an inadequate or incomplete termcap
+     database.
+
+'--with-gnu-malloc'
+     A synonym for '--with-bash-malloc'.
+
+'--with-installed-readline[=PREFIX]'
+     Define this to make Bash link with a locally-installed version of
+     Readline rather than the version in 'lib/readline'.  This works
+     only with Readline 5.0 and later versions.  If PREFIX is 'yes' or
+     not supplied, 'configure' uses the values of the make variables
+     'includedir' and 'libdir', which are subdirectories of 'prefix' by
+     default, to find the installed version of Readline if it is not in
+     the standard system include and library directories.  If PREFIX is
+     'no', Bash links with the version in 'lib/readline'.  If PREFIX is
+     set to any other value, 'configure' treats it as a directory
+     pathname and looks for the installed version of Readline in
+     subdirectories of that directory (include files in PREFIX/'include'
+     and the library in PREFIX/'lib').
+
+'--with-purify'
+     Define this to use the Purify memory allocation checker from
+     Rational Software.
+
+'--enable-minimal-config'
+     This produces a shell with minimal features, close to the
+     historical Bourne shell.
+
+There are several '--enable-' options that alter how Bash is compiled
+and linked, rather than changing run-time features.
+
+'--enable-largefile'
+     Enable support for large files
+     (http://www.unix.org/version2/whatsnew/lfs20mar.html) if the
+     operating system requires special compiler options to build
+     programs which can access large files.  This is enabled by default,
+     if the operating system provides large file support.
+
+'--enable-profiling'
+     This builds a Bash binary that produces profiling information to be
+     processed by 'gprof' each time it is executed.
+
+'--enable-static-link'
+     This causes Bash to be linked statically, if 'gcc' is being used.
+     This could be used to build a version to use as root's shell.
+
+The 'minimal-config' option can be used to disable all of the following
+options, but it is processed first, so individual options may be enabled
+using 'enable-FEATURE'.
+
+All of the following options except for 'disabled-builtins',
+'direxpand-default', and 'xpg-echo-default' are enabled by default,
+unless the operating system does not provide the necessary support.
+
+'--enable-alias'
+     Allow alias expansion and include the 'alias' and 'unalias'
+     builtins (*note Aliases::).
+
+'--enable-arith-for-command'
+     Include support for the alternate form of the 'for' command that
+     behaves like the C language 'for' statement (*note Looping
+     Constructs::).
+
+'--enable-array-variables'
+     Include support for one-dimensional array shell variables (*note
+     Arrays::).
+
+'--enable-bang-history'
+     Include support for 'csh'-like history substitution (*note History
+     Interaction::).
+
+'--enable-brace-expansion'
+     Include 'csh'-like brace expansion ( 'b{a,b}c' ==> 'bac bbc' ).
+     See *note Brace Expansion::, for a complete description.
+
+'--enable-casemod-attributes'
+     Include support for case-modifying attributes in the 'declare'
+     builtin and assignment statements.  Variables with the UPPERCASE
+     attribute, for example, will have their values converted to
+     uppercase upon assignment.
+
+'--enable-casemod-expansion'
+     Include support for case-modifying word expansions.
+
+'--enable-command-timing'
+     Include support for recognizing 'time' as a reserved word and for
+     displaying timing statistics for the pipeline following 'time'
+     (*note Pipelines::).  This allows pipelines as well as shell
+     builtins and functions to be timed.
+
+'--enable-cond-command'
+     Include support for the '[[' conditional command.  (*note
+     Conditional Constructs::).
+
+'--enable-cond-regexp'
+     Include support for matching POSIX regular expressions using the
+     '=~' binary operator in the '[[' conditional command.  (*note
+     Conditional Constructs::).
+
+'--enable-coprocesses'
+     Include support for coprocesses and the 'coproc' reserved word
+     (*note Pipelines::).
+
+'--enable-debugger'
+     Include support for the bash debugger (distributed separately).
+
+'--enable-dev-fd-stat-broken'
+     If calling 'stat' on /dev/fd/N returns different results than
+     calling 'fstat' on file descriptor N, supply this option to enable
+     a workaround.  This has implications for conditional commands that
+     test file attributes.
+
+'--enable-direxpand-default'
+     Cause the 'direxpand' shell option (*note The Shopt Builtin::) to
+     be enabled by default when the shell starts.  It is normally
+     disabled by default.
+
+'--enable-directory-stack'
+     Include support for a 'csh'-like directory stack and the 'pushd',
+     'popd', and 'dirs' builtins (*note The Directory Stack::).
+
+'--enable-disabled-builtins'
+     Allow builtin commands to be invoked via 'builtin xxx' even after
+     'xxx' has been disabled using 'enable -n xxx'.  See *note Bash
+     Builtins::, for details of the 'builtin' and 'enable' builtin
+     commands.
+
+'--enable-dparen-arithmetic'
+     Include support for the '((...))' command (*note Conditional
+     Constructs::).
+
+'--enable-extended-glob'
+     Include support for the extended pattern matching features
+     described above under *note Pattern Matching::.
+
+'--enable-extended-glob-default'
+     Set the default value of the EXTGLOB shell option described above
+     under *note The Shopt Builtin:: to be enabled.
+
+'--enable-function-import'
+     Include support for importing function definitions exported by
+     another instance of the shell from the environment.  This option is
+     enabled by default.
+
+'--enable-glob-asciirange-default'
+     Set the default value of the GLOBASCIIRANGES shell option described
+     above under *note The Shopt Builtin:: to be enabled.  This controls
+     the behavior of character ranges when used in pattern matching
+     bracket expressions.
+
+'--enable-help-builtin'
+     Include the 'help' builtin, which displays help on shell builtins
+     and variables (*note Bash Builtins::).
+
+'--enable-history'
+     Include command history and the 'fc' and 'history' builtin commands
+     (*note Bash History Facilities::).
+
+'--enable-job-control'
+     This enables the job control features (*note Job Control::), if the
+     operating system supports them.
+
+'--enable-multibyte'
+     This enables support for multibyte characters if the operating
+     system provides the necessary support.
+
+'--enable-net-redirections'
+     This enables the special handling of filenames of the form
+     '/dev/tcp/HOST/PORT' and '/dev/udp/HOST/PORT' when used in
+     redirections (*note Redirections::).
+
+'--enable-process-substitution'
+     This enables process substitution (*note Process Substitution::) if
+     the operating system provides the necessary support.
+
+'--enable-progcomp'
+     Enable the programmable completion facilities (*note Programmable
+     Completion::).  If Readline is not enabled, this option has no
+     effect.
+
+'--enable-prompt-string-decoding'
+     Turn on the interpretation of a number of backslash-escaped
+     characters in the '$PS0', '$PS1', '$PS2', and '$PS4' prompt
+     strings.  See *note Controlling the Prompt::, for a complete list
+     of prompt string escape sequences.
+
+'--enable-readline'
+     Include support for command-line editing and history with the Bash
+     version of the Readline library (*note Command Line Editing::).
+
+'--enable-restricted'
+     Include support for a "restricted shell".  If this is enabled,
+     Bash, when called as 'rbash', enters a restricted mode.  See *note
+     The Restricted Shell::, for a description of restricted mode.
+
+'--enable-select'
+     Include the 'select' compound command, which allows the generation
+     of simple menus (*note Conditional Constructs::).
+
+'--enable-separate-helpfiles'
+     Use external files for the documentation displayed by the 'help'
+     builtin instead of storing the text internally.
+
+'--enable-single-help-strings'
+     Store the text displayed by the 'help' builtin as a single string
+     for each help topic.  This aids in translating the text to
+     different languages.  You may need to disable this if your compiler
+     cannot handle very long string literals.
+
+'--enable-strict-posix-default'
+     Make Bash POSIX-conformant by default (*note Bash POSIX Mode::).
+
+'--enable-usg-echo-default'
+     A synonym for '--enable-xpg-echo-default'.
+
+'--enable-xpg-echo-default'
+     Make the 'echo' builtin expand backslash-escaped characters by
+     default, without requiring the '-e' option.  This sets the default
+     value of the 'xpg_echo' shell option to 'on', which makes the Bash
+     'echo' behave more like the version specified in the Single Unix
+     Specification, version 3.  *Note Bash Builtins::, for a description
+     of the escape sequences that 'echo' recognizes.
+
+The file 'config-top.h' contains C Preprocessor '#define' statements for
+options which are not settable from 'configure'.  Some of these are not
+meant to be changed; beware of the consequences if you do.  Read the
+comments associated with each definition for more information about its
+effect.
diff --git a/MANIFEST b/MANIFEST
new file mode 100644
index 0000000..54f327c
--- /dev/null
+++ b/MANIFEST
@@ -0,0 +1,1531 @@
+#
+# Master distribution manifest for bash
+#
+#
+# Filename	type
+#
+CWRU		d
+CWRU/misc	d
+builtins	d
+cross-build	d
+doc	d
+examples	d
+#examples/obashdb	d
+examples/bash-completion	d
+examples/complete	d
+examples/functions d
+examples/scripts d
+#examples/scripts.v2	d
+#examples/scripts.noah	d
+examples/startup-files d
+#examples/startup-files/apple	d
+examples/misc	d
+examples/loadables d
+examples/loadables/perl	d
+include		d
+lib		d
+lib/glob	d
+lib/glob/doc	d
+lib/intl	d
+lib/malloc	d
+lib/readline	d
+lib/readline/doc d
+lib/readline/examples d
+lib/sh		d
+lib/termcap	d
+lib/tilde	d
+m4		d
+po		d
+support		d
+tests		d
+tests/misc	d
+ABOUT-NLS	f
+ChangeLog	s	CWRU/changelog
+CHANGES		f
+COMPAT		f
+COPYING		f
+INSTALL		f
+MANIFEST	f
+NEWS		f
+NOTES		f
+POSIX		f
+README		f
+RBASH		f
+AUTHORS		f
+Y2K		f
+configure.ac	f
+configure	f	755
+Makefile.in	f
+config-top.h	f
+config-bot.h	f
+config.h.in	f
+aclocal.m4	f
+array.c		f
+arrayfunc.c	f
+assoc.c		f
+eval.c		f
+print_cmd.c	f
+general.c	f
+list.c		f
+locale.c	f
+stringlib.c	f
+variables.c	f
+make_cmd.c	f
+copy_cmd.c	f
+unwind_prot.c	f
+dispose_cmd.c	f
+bashhist.c	f
+hashcmd.c	f
+hashlib.c	f
+parse.y		f
+pathexp.c	f
+subst.c		f
+shell.c		f
+trap.c		f
+sig.c		f
+siglist.c	f
+version.c	f
+flags.c		f
+jobs.c		f
+input.c		f
+mailcheck.c	f
+test.c		f
+expr.c		f
+alias.c		f
+execute_cmd.c	f
+findcmd.c	f
+redir.c		f
+bashline.c	f
+braces.c	f
+bracecomp.c	f
+nojobs.c	f
+error.c		f
+xmalloc.c	f
+pcomplete.c	f
+pcomplib.c	f
+mksyntax.c	f
+alias.h		f
+builtins.h	f
+bashhist.h	f
+bashline.h	f
+conftypes.h	f
+patchlevel.h	f
+variables.h	f
+array.h		f
+arrayfunc.h	f
+assoc.h		f
+jobs.h		f
+findcmd.h	f
+hashlib.h	f
+quit.h		f
+flags.h		f
+shell.h		f
+syntax.h	f
+pathexp.h	f
+parser.h	f
+pcomplete.h	f
+sig.h		f
+test.h		f
+trap.h		f
+general.h	f
+unwind_prot.h	f
+input.h		f
+error.h		f
+command.h	f
+externs.h	f
+siglist.h	f
+subst.h		f
+dispose_cmd.h	f
+hashcmd.h	f
+bashansi.h	f
+bashjmp.h	f
+bashintl.h	f
+make_cmd.h	f
+execute_cmd.h	f
+redir.h		f
+bashtypes.h	f
+mailcheck.h	f
+xmalloc.h	f
+y.tab.c		f
+y.tab.h		f
+parser-built	f
+pathnames.h.in	f
+builtins/Makefile.in	f
+builtins/alias.def	f
+builtins/bind.def	f
+builtins/break.def	f
+builtins/builtin.def	f
+builtins/caller.def	f
+builtins/cd.def		f
+builtins/colon.def	f
+builtins/command.def	f
+builtins/complete.def	f
+builtins/common.c	f
+builtins/declare.def	f
+builtins/echo.def	f
+builtins/enable.def	f
+builtins/eval.def	f
+builtins/evalfile.c	f
+builtins/evalstring.c	f
+builtins/exec.def	f
+builtins/exit.def	f
+builtins/fc.def		f
+builtins/fg_bg.def	f
+builtins/gen-helpfiles.c	f
+builtins/getopt.c	f
+builtins/getopt.h	f
+builtins/getopts.def	f
+builtins/hash.def	f
+builtins/help.def	f
+builtins/let.def	f
+builtins/history.def	f
+builtins/jobs.def	f
+builtins/kill.def	f
+builtins/mapfile.def	f
+builtins/mkbuiltins.c	f
+builtins/printf.def	f
+builtins/pushd.def	f
+builtins/read.def	f
+builtins/reserved.def	f
+builtins/return.def	f
+builtins/set.def	f
+builtins/setattr.def	f
+builtins/shift.def	f
+builtins/shopt.def	f
+builtins/source.def	f
+builtins/suspend.def	f
+builtins/test.def	f
+builtins/times.def	f
+builtins/trap.def	f
+builtins/type.def	f
+builtins/ulimit.def	f
+builtins/umask.def	f
+builtins/wait.def	f
+builtins/psize.c	f
+builtins/psize.sh	f
+builtins/inlib.def	f
+builtins/bashgetopt.c	f
+builtins/common.h	f
+builtins/bashgetopt.h	f
+cross-build/cygwin32.cache	f
+cross-build/x86-beos.cache	f
+cross-build/opennt.cache	f
+cross-build/qnx.cache	f
+include/ansi_stdlib.h	f
+include/chartypes.h	f
+include/filecntl.h	f
+include/gettext.h	f
+include/maxpath.h	f
+include/memalloc.h	f
+include/ocache.h	f
+include/posixdir.h	f
+include/posixjmp.h	f
+include/posixselect.h	f
+include/posixstat.h	f
+include/posixtime.h	f
+include/posixwait.h	f
+include/shmbchar.h	f
+include/shmbutil.h	f
+include/shtty.h		f
+include/stat-time.h	f
+include/stdc.h		f
+include/systimes.h	f
+include/typemax.h	f
+include/unionwait.h	f
+lib/glob/Makefile.in	f
+lib/glob/sm_loop.c	f
+lib/glob/smatch.c	f
+lib/glob/strmatch.c	f
+lib/glob/strmatch.h	f
+lib/glob/glob.c		f
+lib/glob/glob.h		f
+lib/glob/glob_loop.c	f
+lib/glob/gmisc.c	f
+lib/glob/gm_loop.c	f
+lib/glob/xmbsrtowcs.c	f
+lib/glob/collsyms.h	f
+lib/glob/doc/Makefile	f
+lib/glob/doc/glob.texi	f
+lib/glob/ndir.h		f
+lib/intl/ChangeLog	f
+lib/intl/Makefile.in	f
+lib/intl/VERSION	f
+lib/intl/bindtextdom.c	f
+lib/intl/config.charset	f
+lib/intl/dcgettext.c	f
+lib/intl/dcigettext.c	f
+lib/intl/dcngettext.c	f
+lib/intl/dgettext.c	f
+lib/intl/dngettext.c	f
+lib/intl/eval-plural.h	f
+lib/intl/explodename.c	f
+lib/intl/finddomain.c	f
+lib/intl/gettext.c	f
+lib/intl/gettextP.h	f
+lib/intl/gmo.h		f
+lib/intl/hash-string.h	f
+lib/intl/intl-compat.c	f
+lib/intl/l10nflist.c	f
+lib/intl/libgnuintl.h.in	f
+lib/intl/loadinfo.h	f
+lib/intl/loadmsgcat.c	f
+lib/intl/localcharset.c	f
+lib/intl/localcharset.h	f
+lib/intl/locale.alias	f
+lib/intl/localealias.c	f
+lib/intl/localename.c	f
+lib/intl/log.c		f
+lib/intl/ngettext.c	f
+lib/intl/os2compat.c	f
+lib/intl/os2compat.h	f
+lib/intl/osdep.c	f
+lib/intl/plural-exp.c	f
+lib/intl/plural-exp.h	f
+lib/intl/plural.c	f
+lib/intl/plural.y	f
+lib/intl/ref-add.sin	f
+lib/intl/ref-del.sin	f
+lib/intl/relocatable.c	f
+lib/intl/relocatable.h	f
+lib/intl/textdomain.c	f
+lib/malloc/Makefile.in	f
+lib/malloc/getpagesize.h	f
+lib/malloc/imalloc.h	f
+lib/malloc/mstats.h	f
+lib/malloc/shmalloc.h	f
+lib/malloc/table.h	f
+lib/malloc/watch.h	f
+lib/malloc/alloca.c	f
+lib/malloc/malloc.c	f
+lib/malloc/stats.c	f
+lib/malloc/table.c	f
+lib/malloc/trace.c	f
+lib/malloc/watch.c	f
+lib/malloc/xmalloc.c	f
+lib/malloc/xleaktrace	f	755
+lib/malloc/stub.c	f
+lib/malloc/i386-alloca.s	f
+lib/malloc/x386-alloca.s	f
+lib/readline/COPYING	f
+lib/readline/Makefile.in	f
+lib/readline/ChangeLog	f
+lib/readline/README	f
+lib/readline/STANDALONE f
+lib/readline/readline.c	f
+lib/readline/vi_mode.c	f
+lib/readline/emacs_keymap.c	f
+lib/readline/vi_keymap.c	f
+lib/readline/history.c	f
+lib/readline/histexpand.c	f
+lib/readline/histsearch.c	f
+lib/readline/histfile.c	f
+lib/readline/funmap.c	f
+lib/readline/keymaps.c	f
+lib/readline/util.c	f
+lib/readline/terminal.c	f
+lib/readline/xfree.c	f
+lib/readline/xmalloc.c	f
+lib/readline/search.c	f
+lib/readline/isearch.c	f
+lib/readline/parens.c	f
+lib/readline/rltty.c	f
+lib/readline/compat.c	f
+lib/readline/complete.c	f
+lib/readline/bind.c	f
+lib/readline/display.c	f
+lib/readline/signals.c	f
+lib/readline/kill.c	f
+lib/readline/text.c	f
+lib/readline/undo.c	f
+lib/readline/macro.c	f
+lib/readline/input.c	f
+lib/readline/callback.c	f
+lib/readline/mbutil.c	f
+lib/readline/misc.c	f
+lib/readline/nls.c	f
+lib/readline/shell.c	f
+lib/readline/colors.c	f
+lib/readline/parse-colors.c	f
+lib/readline/savestring.c	f
+lib/readline/tilde.c	f
+lib/readline/tilde.h	f
+lib/readline/rldefs.h	f
+lib/readline/rlconf.h	f
+lib/readline/rlmbutil.h	f
+lib/readline/rlshell.h	f
+lib/readline/rltty.h	f
+lib/readline/rltypedefs.h	f
+lib/readline/rlwinsize.h	f
+lib/readline/readline.h	f
+lib/readline/tcap.h	f
+lib/readline/keymaps.h	f
+lib/readline/history.h	f
+lib/readline/histlib.h	f
+lib/readline/chardefs.h	f
+lib/readline/posixdir.h	f
+lib/readline/posixjmp.h	f
+lib/readline/posixselect.h	f
+lib/readline/posixstat.h	f
+lib/readline/ansi_stdlib.h	f
+lib/readline/rlstdc.h	f
+lib/readline/rlprivate.h	f
+lib/readline/colors.h	f
+lib/readline/parse-colors.h	f
+lib/readline/xmalloc.h	f
+lib/readline/doc/Makefile	f
+lib/readline/doc/version.texi	f
+lib/readline/doc/rlman.texi	f
+lib/readline/doc/rltech.texi	f
+lib/readline/doc/rluser.texi	f
+lib/readline/doc/rluserman.texi	f
+lib/readline/doc/history.texi	f
+lib/readline/doc/hstech.texi	f
+lib/readline/doc/hsuser.texi	f
+lib/readline/doc/fdl.texi	f
+lib/readline/examples/Makefile	f
+lib/readline/examples/excallback.c	f
+lib/readline/examples/fileman.c	f
+lib/readline/examples/manexamp.c	f
+lib/readline/examples/histexamp.c	f
+lib/readline/examples/rltest.c	f
+lib/readline/examples/rl-callbacktest.c	f
+lib/readline/examples/rl.c	f
+lib/readline/examples/rlcat.c	f
+lib/readline/examples/Inputrc	f
+lib/sh/Makefile.in	f
+lib/sh/casemod.c	f
+lib/sh/clktck.c		f
+lib/sh/clock.c		f
+lib/sh/dprintf.c	f
+lib/sh/eaccess.c	f
+lib/sh/fmtullong.c	f
+lib/sh/fmtulong.c	f
+lib/sh/fmtumax.c	f
+lib/sh/fnxform.c	f
+lib/sh/fpurge.c		f
+lib/sh/getcwd.c		f
+lib/sh/getenv.c		f
+lib/sh/gettimeofday.c	f
+lib/sh/inet_aton.c	f
+lib/sh/input_avail.c	f
+lib/sh/itos.c		f
+lib/sh/mailstat.c	f
+lib/sh/makepath.c	f
+lib/sh/mbscasecmp.c	f
+lib/sh/mbschr.c		f
+lib/sh/mbscmp.c		f
+lib/sh/memset.c		f
+lib/sh/mktime.c		f
+lib/sh/netconn.c	f
+lib/sh/netopen.c	f
+lib/sh/oslib.c		f
+lib/sh/pathcanon.c	f
+lib/sh/pathphys.c	f
+lib/sh/random.c		f
+lib/sh/rename.c		f
+lib/sh/setlinebuf.c	f
+lib/sh/shmatch.c	f
+lib/sh/shmbchar.c	f
+lib/sh/shquote.c	f
+lib/sh/shtty.c		f
+lib/sh/snprintf.c	f
+lib/sh/spell.c		f
+lib/sh/strcasecmp.c	f
+lib/sh/strcasestr.c	f
+lib/sh/strchrnul.c	f
+lib/sh/strdup.c		f
+lib/sh/strerror.c	f
+lib/sh/strftime.c	f
+lib/sh/stringlist.c	f
+lib/sh/stringvec.c	f
+lib/sh/strnlen.c	f
+lib/sh/strpbrk.c	f
+lib/sh/strstr.c		f
+lib/sh/strtod.c		f
+lib/sh/strtoimax.c	f
+lib/sh/strtol.c		f
+lib/sh/strtoll.c	f
+lib/sh/strtoul.c	f
+lib/sh/strtoull.c	f
+lib/sh/strtoumax.c	f
+lib/sh/strtrans.c	f
+lib/sh/times.c		f
+lib/sh/timeval.c	f
+lib/sh/tmpfile.c	f
+lib/sh/uconvert.c	f
+lib/sh/ufuncs.c		f
+lib/sh/unicode.c	f
+lib/sh/utf8.c		f
+lib/sh/vprint.c		f
+lib/sh/wcsdup.c		f
+lib/sh/wcsnwidth.c	f
+lib/sh/wcswidth.c	f
+lib/sh/winsize.c	f
+lib/sh/zcatfd.c		f
+lib/sh/zgetline.c	f
+lib/sh/zmapfd.c		f
+lib/sh/zread.c		f
+lib/sh/zwrite.c		f
+lib/termcap/Makefile.in	f
+lib/termcap/ltcap.h	f
+lib/termcap/termcap.c	f
+lib/termcap/termcap.h	f
+lib/termcap/tparam.c	f
+lib/termcap/version.c	f
+lib/tilde/README	f
+lib/tilde/Makefile.in	f
+lib/tilde/tilde.c	f
+lib/tilde/tilde.h	f
+lib/tilde/shell.c	f
+m4/stat-time.m4		f
+m4/timespec.m4		f
+m4/codeset.m4		f
+m4/extern-inline.m4	f
+m4/fcntl-o.m4		f
+m4/gettext.m4		f
+m4/glibc2.m4		f
+m4/glibc21.m4		f
+m4/host-cpu-c-abi.m4	f
+m4/iconv.m4		f
+m4/intdiv0.m4		f
+m4/intl-thread-locale.m4	f
+m4/intl.m4		f
+m4/intlmacosx.m4	f
+m4/intmax.m4		f
+m4/inttypes-pri.m4	f
+m4/inttypes.m4		f
+m4/inttypes_h.m4	f
+m4/lcmessage.m4		f
+m4/lib-ld.m4		f
+m4/lib-link.m4		f
+m4/lib-prefix.m4	f
+m4/lock.m4		f
+m4/nls.m4		f
+m4/po.m4		f
+m4/printf-posix.m4	f
+m4/progtest.m4		f
+m4/pthread_rwlock_rdlock.m4	f
+m4/size_max.m4		f
+m4/stdint_h.m4		f
+m4/threadlib.m4		f
+m4/uintmax_t.m4		f
+m4/ulonglong.m4		f
+m4/visibility.m4	f
+m4/wchar_t.m4		f
+m4/wint_t.m4		f
+m4/xsize.m4		f
+po/LINGUAS		f
+po/Makefile.in.in	f
+po/Makevars		f
+po/POTFILES.in		f
+po/README		f
+po/Rules-builtins	f
+po/Rules-quot		f
+po/bash.pot		f
+po/boldquot.sed		f
+po/en@boldquot.gmo	f
+po/en@boldquot.header	f
+po/en@boldquot.po	f
+po/en@quot.gmo		f
+po/en@quot.header	f
+po/en@quot.po		f
+po/af.gmo		f
+po/af.po		f
+po/bg.gmo		f
+po/bg.po		f
+po/ca.gmo		f
+po/ca.po		f
+po/cs.gmo		f
+po/cs.po		f
+po/da.gmo		f
+po/da.po		f
+po/de.gmo		f
+po/de.po		f
+po/el.gmo		f
+po/el.po		f
+po/eo.gmo		f
+po/eo.po		f
+po/es.gmo		f
+po/es.po		f
+po/et.gmo		f
+po/et.po		f
+po/fi.gmo		f
+po/fi.po		f
+po/fr.gmo		f
+po/fr.po		f
+po/ga.gmo		f
+po/ga.po		f
+po/gl.gmo		f
+po/gl.po		f
+po/hr.gmo		f
+po/hr.po		f
+po/hu.gmo		f
+po/hu.po		f
+po/id.gmo		f
+po/id.po		f
+po/it.gmo		f
+po/it.po		f
+po/ja.gmo		f
+po/ja.po		f
+po/ko.gmo		f
+po/ko.po		f
+po/lt.gmo		f
+po/lt.po		f
+po/nl.gmo		f
+po/nb.po		f
+po/nb.gmo		f
+po/nl.po		f
+po/pl.gmo		f
+po/pl.po		f
+po/pt.gmo		f
+po/pt.po		f
+po/pt_BR.gmo		f
+po/pt_BR.po		f
+po/ro.gmo		f
+po/ro.po		f
+po/ru.gmo		f
+po/ru.po		f
+po/sk.gmo		f
+po/sk.po		f
+po/sl.gmo		f
+po/sr.po		f
+po/sr.gmo		f
+po/sl.po		f
+po/sv.gmo		f
+po/sv.po		f
+po/tr.gmo		f
+po/tr.po		f
+po/uk.gmo		f
+po/uk.po		f
+po/vi.gmo		f
+po/vi.po		f
+po/zh_CN.gmo		f
+po/zh_CN.po		f
+po/zh_TW.gmo		f
+po/zh_TW.po		f
+po/insert-header.sin	f
+po/quot.sed		f
+po/remove-potcdate.sin	f
+CWRU/misc/open-files.c	f
+CWRU/misc/sigs.c	f
+CWRU/misc/sigstat.c	f
+CWRU/misc/bison		f
+CWRU/misc/errlist.c	f
+CWRU/misc/hpux10-dlfcn.h	f
+CWRU/PLATFORMS		f
+CWRU/README		f
+CWRU/changelog		f
+CWRU/sh-redir-hack	f
+doc/FAQ		f
+doc/Makefile.in	f
+doc/bash.1	f
+doc/bashbug.1	f
+doc/builtins.1	f
+doc/rbash.1	f
+doc/README	f
+doc/INTRO	f
+doc/texinfo.tex	f
+doc/bashref.texi	f
+doc/version.texi	f
+doc/bashref.info	f
+doc/bash.info	f
+doc/article.ms	f
+doc/htmlpost.sh	f	755
+doc/infopost.sh	f	755
+doc/fdl.texi	f
+doc/fdl.txt	f
+#
+doc/article.ps	f
+doc/rose94.ps	f
+doc/bash.ps		f
+doc/bashbug.ps	f
+doc/builtins.ps	f
+doc/rbash.ps	f
+doc/bashref.ps	f
+doc/bashref.dvi	f
+doc/bash.0		f
+doc/bashbug.0		f
+doc/builtins.0	f
+doc/rbash.0	f
+doc/article.txt	f
+doc/bash.html		f
+doc/bashref.html	f
+doc/article.pdf	f
+doc/bash.pdf	f
+doc/bashref.pdf	f
+doc/rose94.pdf	f
+doc/aosa-bash.pdf	f
+doc/aosa-bash-full.pdf	f
+#
+support/Makefile.in	f
+support/bash.pc.in	f
+support/bashversion.c	f
+support/checkbashisms	f	755
+support/config.guess	f
+support/config.rpath	f	755
+support/config.sub	f
+support/printenv.sh	f	755
+support/printenv.c	f
+support/bash.xbm	f
+support/missing		f	755
+support/mkclone		f	755
+support/mkconffiles	f	755
+support/mkdirs		f	755
+support/mkinstalldirs	f	755
+support/mkversion.sh	f	755
+support/mksignames.c	f
+support/signames.c	f
+support/bashbug.sh	f
+support/bashbug.sh.in	f
+support/man2html.c	f
+support/recho.c		f
+support/zecho.c		f
+support/xcase.c		f
+support/SYMLINKS	f
+support/fixlinks	f	755
+support/install.sh	f	755
+support/texi2dvi	f	755
+support/texi2html	f	755
+support/xenix-link.sh	f	755
+support/shobj-conf	f	755
+support/rlvers.sh	f	755
+examples/INDEX.txt	f
+examples/INDEX.html	f
+#examples/obashdb/PERMISSION	f
+#examples/obashdb/README	f
+#examples/obashdb/bashdb		f
+#examples/obashdb/bashdb.el	f
+examples/bash-completion/README	f
+examples/bash-completion/bash-completion-2.5.tar.xz	f
+examples/complete/bash_completion	f
+examples/complete/cdfunc	f
+examples/complete/complete-examples	f
+#examples/complete/complete.ianmac	f
+#examples/complete/complete2.ianmac	f
+#examples/complete/complete.freebsd	f
+#examples/complete/complete.gnu-longopt	f
+examples/complete/bashcc-1.0.1.tar.gz	f
+examples/loadables/README	f
+examples/loadables/template.c	f
+examples/loadables/loadables.h	f
+examples/loadables/Makefile.in	f
+examples/loadables/Makefile.inc.in	f
+examples/loadables/necho.c	f
+examples/loadables/hello.c	f
+examples/loadables/asort.c	f
+examples/loadables/accept.c	f
+examples/loadables/print.c	f
+examples/loadables/realpath.c	f
+examples/loadables/seq.c	f
+examples/loadables/setpgid.c	f
+examples/loadables/sleep.c	f
+examples/loadables/strftime.c	f
+examples/loadables/truefalse.c	f
+#examples/loadables/getconf.h	f
+#examples/loadables/getconf.c	f
+examples/loadables/fdflags.c	f
+examples/loadables/finfo.c	f
+examples/loadables/cat.c	f
+examples/loadables/csv.c	f
+examples/loadables/cut.c	f
+examples/loadables/logname.c	f
+examples/loadables/basename.c	f
+examples/loadables/dirname.c	f
+examples/loadables/tty.c	f
+examples/loadables/pathchk.c	f
+examples/loadables/tee.c	f
+examples/loadables/rm.c		f
+examples/loadables/rmdir.c	f
+examples/loadables/head.c	f
+examples/loadables/printenv.c	f
+examples/loadables/push.c	f
+examples/loadables/id.c		f
+examples/loadables/whoami.c	f
+examples/loadables/uname.c	f
+examples/loadables/sync.c	f
+examples/loadables/mkdir.c	f
+examples/loadables/mkfifo.c	f
+examples/loadables/mktemp.c	f
+examples/loadables/ln.c		f
+examples/loadables/mypid.c	f
+examples/loadables/unlink.c	f
+examples/loadables/stat.c	f
+examples/loadables/perl/Makefile.in	f
+examples/loadables/perl/README	f
+examples/loadables/perl/bperl.c	f
+examples/loadables/perl/iperl.c	f
+#examples/loadables/sprintf.c	f
+#examples/loadables/xtitle.c	f
+examples/functions/array-stuff	f
+examples/functions/array-to-string	f
+examples/functions/arrayops.bash	f
+examples/functions/autoload	f
+examples/functions/autoload.v2	f
+examples/functions/autoload.v3	f
+examples/functions/autoload.v4	f
+examples/functions/autoload.v4.t	f
+examples/functions/basename	f
+#examples/functions/basename2	f
+#examples/functions/coproc.bash	f
+#examples/functions/coshell.README	f
+#examples/functions/coshell.bash	f
+examples/functions/csh-compat	f
+#examples/functions/dirfuncs	f
+examples/functions/dirname	f
+examples/functions/dirstack	f
+#examples/functions/emptydir	f
+examples/functions/exitstat	f
+examples/functions/external	f
+examples/functions/fact		f
+examples/functions/fstty	f
+examples/functions/func		f
+#examples/functions/gethtml	f
+#examples/functions/getoptx.bash	f
+examples/functions/inetaddr	f
+examples/functions/inpath	f
+#examples/functions/isnum.bash	f
+examples/functions/isnum2	f
+examples/functions/isvalidip	f
+#examples/functions/jdate.bash	f
+#examples/functions/jj.bash	f
+#examples/functions/keep		f
+examples/functions/ksh-cd	f
+examples/functions/ksh-compat-test	f
+examples/functions/kshenv	f
+examples/functions/login	f
+#examples/functions/lowercase	f
+#examples/functions/manpage	f
+#examples/functions/mhfold	f
+#examples/functions/newdirstack.bsh	f
+examples/functions/notify.bash	f
+#examples/functions/pathfuncs	f
+#examples/functions/recurse	f
+#examples/functions/repeat2	f
+#examples/functions/repeat3	f
+examples/functions/seq		f
+examples/functions/seq2		f
+examples/functions/shcat	f
+examples/functions/shcat2	f
+examples/functions/sort-pos-params	f
+#examples/functions/sqroot	f
+examples/functions/substr	f
+examples/functions/substr2	f
+#examples/functions/term		f
+examples/functions/whatis	f
+examples/functions/whence	f
+examples/functions/which	f
+#examples/functions/xalias.bash	f
+#examples/functions/xfind.bash	f
+#examples/scripts/adventure.sh	f
+#examples/scripts/bash-hexdump.sh	f
+#examples/scripts/bcsh.sh	f
+examples/scripts/cat.sh		f
+examples/scripts/center		f
+#examples/scripts/dd-ex.sh	f
+#examples/scripts/fixfiles.bash	f
+#examples/scripts/hanoi.bash	f
+examples/scripts/inpath		f
+#examples/scripts/krand.bash	f
+#examples/scripts/line-input.bash	f
+#examples/scripts/nohup.bash	f
+#examples/scripts/precedence	f
+#examples/scripts/randomcard.bash	f
+#examples/scripts/scrollbar	f
+#examples/scripts/scrollbar2	f
+#examples/scripts/self-repro	f
+#examples/scripts/showperm.bash	f
+examples/scripts/shprompt	f
+examples/scripts/spin.bash	f
+#examples/scripts/timeout	f
+#examples/scripts/timeout2	f
+#examples/scripts/timeout3	f
+#examples/scripts/vtree2		f
+#examples/scripts/vtree3		f
+#examples/scripts/vtree3a	f
+#examples/scripts/websrv.sh	f
+examples/scripts/xterm_title	f
+examples/scripts/zprintf	f
+examples/startup-files/README	f
+examples/startup-files/Bashrc.bfox	f
+examples/startup-files/Bash_aliases	f
+examples/startup-files/Bash_profile	f
+examples/startup-files/bash-profile	f
+examples/startup-files/bashrc	f
+#examples/startup-files/apple/README	f
+#examples/startup-files/apple/aliases	f
+#examples/startup-files/apple/bash.defaults	f
+#examples/startup-files/apple/environment	f
+#examples/startup-files/apple/login	f
+#examples/startup-files/apple/logout	f
+#examples/startup-files/apple/rc		f
+#examples/misc/suncmd.termcap	f
+examples/misc/aliasconv.sh	f
+examples/misc/aliasconv.bash	f
+examples/misc/cshtobash	f
+tests/README		f
+tests/COPYRIGHT		f
+tests/test-glue-functions	f
+tests/alias.tests	f
+tests/alias1.sub	f
+tests/alias2.sub	f
+tests/alias3.sub	f
+tests/alias4.sub	f
+tests/alias5.sub	f
+tests/alias.right	f
+tests/appendop.tests	f
+tests/appendop1.sub	f
+tests/appendop2.sub	f
+tests/appendop.right	f
+tests/arith-for.tests	f
+tests/arith-for.right	f
+tests/arith.tests	f
+tests/arith.right	f
+tests/arith1.sub	f
+tests/arith2.sub	f
+tests/arith3.sub	f
+tests/arith4.sub	f
+tests/arith5.sub	f
+tests/arith6.sub	f
+tests/arith7.sub	f
+tests/arith8.sub	f
+tests/array.tests	f
+tests/array.right	f
+tests/array1.sub	f
+tests/array2.sub	f
+tests/array3.sub	f
+tests/array4.sub	f
+tests/array5.sub	f
+tests/array6.sub	f
+tests/array7.sub	f
+tests/array8.sub	f
+tests/array9.sub	f
+tests/array10.sub	f
+tests/array11.sub	f
+tests/array12.sub	f
+tests/array13.sub	f
+tests/array14.sub	f
+tests/array15.sub	f
+tests/array16.sub	f
+tests/array17.sub	f
+tests/array18.sub	f
+tests/array19.sub	f
+tests/array20.sub	f
+tests/array21.sub	f
+tests/array22.sub	f
+tests/array23.sub	f
+tests/array24.sub	f
+tests/array25.sub	f
+tests/array26.sub	f
+tests/array27.sub	f
+tests/array28.sub	f
+tests/array-at-star	f
+tests/array2.right	f
+tests/assoc.tests	f
+tests/assoc.right	f
+tests/assoc1.sub	f
+tests/assoc2.sub	f
+tests/assoc3.sub	f
+tests/assoc4.sub	f
+tests/assoc5.sub	f
+tests/assoc6.sub	f
+tests/assoc7.sub	f
+tests/assoc8.sub	f
+tests/assoc9.sub	f
+tests/assoc10.sub	f
+tests/assoc11.sub	f
+tests/attr.tests	f
+tests/attr.right	f
+tests/attr1.sub		f
+tests/attr2.sub		f
+tests/braces.tests	f
+tests/braces.right	f
+tests/builtins.tests	f
+tests/builtins.right	f
+tests/builtins1.sub	f
+tests/builtins2.sub	f
+tests/builtins3.sub	f
+tests/builtins4.sub	f
+tests/builtins5.sub	f
+tests/builtins6.sub	f
+tests/builtins7.sub	f
+tests/source1.sub	f
+tests/source2.sub	f
+tests/source3.sub	f
+tests/source4.sub	f
+tests/source5.sub	f
+tests/source6.sub	f
+tests/source7.sub	f
+tests/case.tests	f
+tests/case.right	f
+tests/case1.sub		f
+tests/case2.sub		f
+tests/case3.sub		f
+tests/case4.sub		f
+tests/casemod.tests	f
+tests/casemod.right	f
+tests/complete.tests	f
+tests/complete.right	f
+tests/comsub.tests	f
+tests/comsub.right	f
+tests/comsub1.sub	f
+tests/comsub2.sub	f
+tests/comsub3.sub	f
+tests/comsub4.sub	f
+tests/comsub-eof.tests	f
+tests/comsub-eof0.sub	f
+tests/comsub-eof1.sub	f
+tests/comsub-eof2.sub	f
+tests/comsub-eof3.sub	f
+tests/comsub-eof4.sub	f
+tests/comsub-eof5.sub	f
+tests/comsub-eof6.sub	f
+tests/comsub-eof.right	f
+tests/comsub-posix.tests	f
+tests/comsub-posix.right	f
+tests/comsub-posix1.sub	f
+tests/comsub-posix2.sub	f
+tests/comsub-posix3.sub	f
+tests/cond.tests	f
+tests/cond.right	f
+tests/cond-regexp1.sub	f
+tests/cond-regexp2.sub	f
+tests/cond-regexp3.sub	f
+tests/coproc.tests	f
+tests/coproc.right	f
+tests/cprint.tests	f
+tests/cprint.right	f
+tests/dbg-support.right	f
+tests/dbg-support.sub	f
+tests/dbg-support.tests	f
+tests/dbg-support2.right	f
+tests/dbg-support2.tests	f
+tests/dbg-support3.sub	f
+tests/dollar-at-star	f
+tests/dollar-at-star1.sub	f
+tests/dollar-at-star2.sub	f
+tests/dollar-at-star3.sub	f
+tests/dollar-at-star4.sub	f
+tests/dollar-at-star5.sub	f
+tests/dollar-at-star6.sub	f
+tests/dollar-at-star7.sub	f
+tests/dollar-at-star8.sub	f
+tests/dollar-at-star9.sub	f
+tests/dollar-at1.sub	f
+tests/dollar-at2.sub	f
+tests/dollar-at3.sub	f
+tests/dollar-at4.sub	f
+tests/dollar-at5.sub	f
+tests/dollar-at6.sub	f
+tests/dollar-at7.sub	f
+tests/dollar-star1.sub	f
+tests/dollar-star2.sub	f
+tests/dollar-star3.sub	f
+tests/dollar-star4.sub	f
+tests/dollar-star5.sub	f
+tests/dollar-star6.sub	f
+tests/dollar-star7.sub	f
+tests/dollar-star8.sub	f
+tests/dollar-star9.sub	f
+tests/dollar-star10.sub	f
+tests/dollar.right	f
+tests/dstack.tests	f
+tests/dstack.right	f
+tests/dstack2.tests	f
+tests/dstack2.right	f
+tests/dynvar.tests	f
+tests/dynvar.right	f
+tests/errors.tests	f
+tests/errors.right	f
+tests/errors1.sub	f
+tests/errors2.sub	f
+tests/errors3.sub	f
+tests/errors4.sub	f
+tests/errors5.sub	f
+tests/errors6.sub	f
+tests/errors7.sub	f
+tests/errors8.sub	f
+tests/execscript	f
+tests/exec.right	f
+tests/exec1.sub		f	755
+tests/exec2.sub		f
+tests/exec3.sub		f
+tests/exec4.sub		f
+tests/exec5.sub		f
+tests/exec6.sub		f
+tests/exec7.sub		f
+tests/exec8.sub		f
+tests/exec9.sub		f
+tests/exec10.sub	f
+tests/exec11.sub	f
+tests/exec12.sub	f
+tests/exec13.sub	f
+tests/exec14.sub	f
+tests/exp.tests		f
+tests/exp.right		f
+tests/exp1.sub		f
+tests/exp2.sub		f
+tests/exp3.sub		f
+tests/exp4.sub		f
+tests/exp5.sub		f
+tests/exp6.sub		f
+tests/exp7.sub		f
+tests/exp8.sub		f
+tests/exp9.sub		f
+tests/exp10.sub		f
+tests/exp11.sub		f
+tests/exp12.sub		f
+tests/exportfunc.tests	f
+tests/exportfunc.right	f
+tests/exportfunc1.sub	f
+tests/exportfunc2.sub	f
+tests/exportfunc3.sub	f
+tests/extglob.tests	f
+tests/extglob.right	f
+tests/extglob1.sub	f
+tests/extglob1a.sub	f
+tests/extglob2.sub	f
+tests/extglob2.tests	f
+tests/extglob2.right	f
+tests/extglob3.sub	f
+tests/extglob3.tests	f
+tests/extglob3.right	f
+tests/extglob4.sub	f
+tests/extglob5.sub	f
+tests/func.tests	f
+tests/func.right	f
+tests/func1.sub		f
+tests/func2.sub		f
+tests/func3.sub		f
+tests/func4.sub		f
+tests/getopts.tests	f
+tests/getopts.right	f
+tests/getopts1.sub	f
+tests/getopts2.sub	f
+tests/getopts3.sub	f
+tests/getopts4.sub	f
+tests/getopts5.sub	f
+tests/getopts6.sub	f
+tests/getopts7.sub	f
+tests/getopts8.sub	f
+tests/getopts9.sub	f
+tests/getopts10.sub	f
+tests/glob.tests	f
+tests/glob1.sub		f
+tests/glob2.sub		f
+tests/glob3.sub		f
+tests/glob4.sub		f
+tests/glob5.sub		f
+tests/glob6.sub		f
+tests/glob7.sub		f
+tests/glob8.sub		f
+tests/glob9.sub		f
+tests/glob.right	f
+tests/globstar.tests	f
+tests/globstar.right	f
+tests/globstar1.sub	f
+tests/globstar2.sub	f
+tests/globstar3.sub	f
+tests/heredoc.tests	f
+tests/heredoc.right	f
+tests/heredoc1.sub	f
+tests/heredoc2.sub	f
+tests/heredoc3.sub	f
+tests/heredoc4.sub	f
+tests/heredoc5.sub	f
+tests/herestr.tests	f
+tests/herestr.right	f
+tests/herestr1.sub	f
+tests/histexp.tests	f
+tests/histexp1.sub	f
+tests/histexp2.sub	f
+tests/histexp3.sub	f
+tests/histexp4.sub	f
+tests/histexp5.sub	f
+tests/histexp6.sub	f
+tests/histexp7.sub	f
+tests/histexp.right	f
+tests/history.tests	f
+tests/history.right	f
+tests/history.list	f	444
+tests/history1.sub	f
+tests/history2.sub	f
+tests/history3.sub	f
+tests/history4.sub	f
+tests/history5.sub	f
+tests/ifs.tests		f
+tests/ifs.right		f
+tests/ifs1.sub		f
+tests/ifs-posix.tests	f
+tests/ifs-posix.right	f
+tests/input-line.sh	f
+tests/input-line.sub	f
+tests/input.right	f
+tests/intl.tests	f
+tests/intl1.sub		f
+tests/intl2.sub		f
+tests/intl3.sub		f
+tests/intl.right	f
+tests/iquote.tests	f
+tests/iquote.right	f
+tests/iquote1.sub	f
+tests/invert.tests	f
+tests/invert.right	f
+tests/jobs.tests	f
+tests/jobs1.sub		f
+tests/jobs2.sub		f
+tests/jobs3.sub		f
+tests/jobs4.sub		f
+tests/jobs5.sub		f
+tests/jobs6.sub		f
+tests/jobs7.sub		f
+tests/jobs.right	f
+tests/lastpipe.right	f
+tests/lastpipe.tests	f
+tests/lastpipe1.sub	f
+tests/lastpipe2.sub	f
+tests/mapfile.data	f
+tests/mapfile.right	f
+tests/mapfile.tests	f
+tests/mapfile1.sub	f
+tests/mapfile2.sub	f
+tests/more-exp.tests	f
+tests/more-exp.right	f
+tests/nameref.tests	f
+tests/nameref1.sub	f
+tests/nameref2.sub	f
+tests/nameref3.sub	f
+tests/nameref4.sub	f
+tests/nameref5.sub	f
+tests/nameref6.sub	f
+tests/nameref7.sub	f
+tests/nameref8.sub	f
+tests/nameref9.sub	f
+tests/nameref10.sub	f
+tests/nameref11.sub	f
+tests/nameref12.sub	f
+tests/nameref13.sub	f
+tests/nameref14.sub	f
+tests/nameref15.sub	f
+tests/nameref16.sub	f
+tests/nameref17.sub	f
+tests/nameref18.sub	f
+tests/nameref19.sub	f
+tests/nameref20.sub	f
+tests/nameref21.sub	f
+tests/nameref.right	f
+tests/new-exp.tests	f
+tests/new-exp1.sub	f
+tests/new-exp2.sub	f
+tests/new-exp3.sub	f
+tests/new-exp4.sub	f
+tests/new-exp5.sub	f
+tests/new-exp6.sub	f
+tests/new-exp7.sub	f
+tests/new-exp8.sub	f
+tests/new-exp9.sub	f
+tests/new-exp10.sub	f
+tests/new-exp11.sub	f
+tests/new-exp12.sub	f
+tests/new-exp13.sub	f
+tests/new-exp14.sub	f
+tests/new-exp15.sub	f
+tests/new-exp.right	f
+tests/nquote.tests	f
+tests/nquote.right	f
+tests/nquote1.sub	f
+tests/nquote2.sub	f
+tests/nquote3.sub	f
+tests/nquote1.tests	f
+tests/nquote1.right	f
+tests/nquote2.tests	f
+tests/nquote2.right	f
+tests/nquote3.tests	f
+tests/nquote3.right	f
+tests/nquote4.tests	f
+tests/nquote4.right	f
+tests/nquote5.tests	f
+tests/nquote5.right	f
+tests/parser.tests	f
+tests/parser.right	f
+tests/parser1.sub	f
+tests/posix2.tests	f
+tests/posix2.right	f
+tests/posix2syntax.sub	f
+tests/posixexp.tests	f
+tests/posixexp.right	f
+tests/posixexp1.sub	f
+tests/posixexp2.sub	f
+tests/posixexp3.sub	f
+tests/posixexp4.sub	f
+tests/posixexp5.sub	f
+tests/posixexp6.sub	f
+tests/posixexp7.sub	f
+tests/posixexp8.sub	f
+tests/posixexp2.tests	f
+tests/posixexp2.right	f
+tests/posixpat.tests	f
+tests/posixpat.right	f
+tests/posixpipe.tests	f
+tests/posixpipe.right	f
+tests/prec.right	f
+tests/precedence.tests	f
+tests/printf.tests	f
+tests/printf.right	f
+tests/printf1.sub	f
+tests/printf2.sub	f
+tests/printf3.sub	f
+tests/printf4.sub	f
+tests/procsub.tests	f
+tests/procsub.right	f
+tests/procsub1.sub	f
+tests/procsub2.sub	f
+tests/quote.tests	f
+tests/quote.right	f
+tests/quote1.sub	f
+tests/quote2.sub	f
+tests/quote3.sub	f
+tests/quote4.sub	f
+tests/read.tests	f
+tests/read.right	f
+tests/read1.sub		f
+tests/read2.sub		f
+tests/read3.sub		f
+tests/read4.sub		f
+tests/read5.sub		f
+tests/read6.sub		f
+tests/redir.tests	f
+tests/redir.right	f
+tests/redir1.sub	f
+tests/redir2.sub	f
+tests/redir3.sub	f
+tests/redir3.in1	f
+tests/redir3.in2	f
+tests/redir4.sub	f
+tests/redir4.in1	f
+tests/redir5.sub	f
+tests/redir6.sub	f
+tests/redir7.sub	f
+tests/redir8.sub	f
+tests/redir9.sub	f
+tests/redir10.sub	f
+tests/redir11.sub	f
+tests/rhs-exp.tests	f
+tests/rhs-exp.right	f
+tests/rhs-exp1.sub	f
+tests/rsh.tests		f
+tests/rsh.right		f
+tests/rsh1.sub		f
+tests/rsh2.sub		f
+tests/run-all		f
+tests/run-minimal	f
+tests/run-alias		f
+tests/run-appendop	f
+tests/run-arith-for	f
+tests/run-arith		f
+tests/run-array		f
+tests/run-array2	f
+tests/run-assoc		f
+tests/run-attr		f
+tests/run-braces	f
+tests/run-builtins	f
+tests/run-case		f
+tests/run-casemod	f
+tests/run-complete	f
+tests/run-comsub	f
+tests/run-comsub-eof	f
+tests/run-comsub-posix	f
+tests/run-cond		f
+tests/run-coproc	f
+tests/run-cprint	f
+tests/run-dbg-support	f
+tests/run-dbg-support2	f
+tests/run-dirstack	f
+tests/run-dollars	f
+tests/run-dynvar	f
+tests/run-errors	f
+tests/run-execscript	f
+tests/run-exp-tests	f
+tests/run-exportfunc	f
+tests/run-extglob	f
+tests/run-extglob2	f
+tests/run-extglob3	f
+tests/run-func		f
+tests/run-getopts	f
+tests/run-glob-test	f
+tests/run-globstar	f
+tests/run-heredoc	f
+tests/run-herestr	f
+tests/run-histexpand	f
+tests/run-history	f
+tests/run-ifs		f
+tests/run-ifs-posix	f
+tests/run-input-test	f
+tests/run-intl		f
+tests/run-iquote	f
+tests/run-invert	f
+tests/run-jobs		f
+tests/run-lastpipe	f
+tests/run-mapfile	f
+tests/run-more-exp	f
+tests/run-nameref	f
+tests/run-new-exp	f
+tests/run-nquote	f
+tests/run-nquote1	f
+tests/run-nquote2	f
+tests/run-nquote3	f
+tests/run-nquote4	f
+tests/run-nquote5	f
+tests/run-parser	f
+tests/run-posix2	f
+tests/run-posixexp	f
+tests/run-posixexp2	f
+tests/run-posixpat	f
+tests/run-posixpipe	f
+tests/run-precedence	f
+tests/run-printf	f
+tests/run-procsub	f
+tests/run-quote		f
+tests/run-read		f
+tests/run-redir		f
+tests/run-rhs-exp	f
+tests/run-rsh		f
+tests/run-set-e		f
+tests/run-set-x		f
+tests/run-shopt		f
+tests/run-strip		f
+tests/run-test		f
+tests/run-tilde		f
+tests/run-tilde2	f
+tests/run-trap		f
+tests/run-type		f
+tests/run-varenv	f
+tests/run-vredir	f
+tests/set-e.tests	f
+tests/set-e1.sub	f
+tests/set-e2.sub	f
+tests/set-e3.sub	f
+tests/set-e3a.sub	f
+tests/set-e.right	f
+tests/set-x.tests	f
+tests/set-x1.sub	f
+tests/set-x.right	f
+tests/shopt.tests	f
+tests/shopt1.sub	f
+tests/shopt.right	f
+tests/strip.tests	f
+tests/strip.right	f
+tests/test.tests	f
+tests/test1.sub		f
+tests/test.right	f
+tests/tilde.tests	f
+tests/tilde.right	f
+tests/tilde2.tests	f
+tests/tilde2.right	f
+tests/trap.tests	f
+tests/trap.right	f
+tests/trap1.sub		f	755
+tests/trap2.sub		f	755
+tests/trap2a.sub	f	755
+tests/trap3.sub		f
+tests/trap4.sub		f
+tests/trap5.sub		f
+tests/trap6.sub		f
+tests/type.tests	f
+tests/type.right	f
+tests/type1.sub		f
+tests/type2.sub		f
+tests/type3.sub		f
+tests/type4.sub		f
+tests/unicode1.sub	f
+tests/unicode2.sub	f
+tests/unicode3.sub	f
+tests/varenv.right	f
+tests/varenv.tests	f
+tests/varenv1.sub	f
+tests/varenv2.sub	f
+tests/varenv3.sub	f
+tests/varenv4.sub	f
+tests/varenv5.sub	f
+tests/varenv6.sub	f
+tests/varenv7.sub	f
+tests/varenv8.sub	f
+tests/varenv9.sub	f
+tests/varenv10.sub	f
+tests/varenv11.sub	f
+tests/varenv12.sub	f
+tests/varenv13.sub	f
+tests/varenv14.sub	f
+tests/varenv15.sub	f
+tests/varenv15.in	f
+tests/varenv16.sub	f
+tests/varenv17.sub	f
+tests/varenv18.sub	f
+tests/varenv19.sub	f
+tests/varenv20.sub	f
+tests/varenv21.sub	f
+tests/version		f
+tests/version.mini	f
+tests/vredir.tests	f
+tests/vredir.right	f
+tests/vredir1.sub	f
+tests/vredir2.sub	f
+tests/vredir3.sub	f
+tests/vredir4.sub	f
+tests/vredir5.sub	f
+tests/vredir6.sub	f
+tests/vredir7.sub	f
+tests/misc/dev-tcp.tests	f
+tests/misc/perf-script	f
+tests/misc/perftest	f
+tests/misc/read-nchars.tests	f
+tests/misc/redir-t2.sh	f
+tests/misc/run-r2.sh	f
+tests/misc/sigint-1.sh		f
+tests/misc/sigint-2.sh		f
+tests/misc/sigint-3.sh		f
+tests/misc/sigint-4.sh		f
+tests/misc/test-minus-e.1	f
+tests/misc/test-minus-e.2	f
+tests/misc/wait-bg.tests	f
+#examples/scripts.v2/PERMISSION	f
+#examples/scripts.v2/README	f
+#examples/scripts.v2/arc2tarz	f
+#examples/scripts.v2/bashrand	f
+#examples/scripts.v2/cal2day.bash	f
+#examples/scripts.v2/cdhist.bash	f
+#examples/scripts.v2/corename	f
+#examples/scripts.v2/fman	f
+#examples/scripts.v2/frcp	f
+#examples/scripts.v2/lowercase	f
+#examples/scripts.v2/ncp	f
+#examples/scripts.v2/newext	f
+#examples/scripts.v2/nmv	f
+#examples/scripts.v2/pages	f
+#examples/scripts.v2/pf	f
+#examples/scripts.v2/ren		f
+#examples/scripts.v2/rename	f
+#examples/scripts.v2/repeat	f
+#examples/scripts.v2/untar	f
+#examples/scripts.v2/uudec	f
+#examples/scripts.v2/uuenc	f
+#examples/scripts.v2/vtree	f
+#examples/scripts.v2/where	f
+#examples/scripts.v2/pmtop	f
+#examples/scripts.v2/shprof	f
+#examples/scripts.noah/PERMISSION	f
+#examples/scripts.noah/README	f
+#examples/scripts.noah/aref.bash	f
+#examples/scripts.noah/bash.sub.bash	f
+#examples/scripts.noah/bash_version.bash	f
+#examples/scripts.noah/meta.bash	f
+#examples/scripts.noah/mktmp.bash	f
+#examples/scripts.noah/number.bash	f
+#examples/scripts.noah/prompt.bash	f
+#examples/scripts.noah/remap_keys.bash	f
+#examples/scripts.noah/require.bash	f
+#examples/scripts.noah/send_mail.bash	f
+#examples/scripts.noah/shcat.bash	f
+#examples/scripts.noah/source.bash	f
+#examples/scripts.noah/string.bash	f
+#examples/scripts.noah/stty.bash	f
+#examples/scripts.noah/y_or_n_p.bash	f
diff --git a/Makefile.in b/Makefile.in
new file mode 100644
index 0000000..bc97049
--- /dev/null
+++ b/Makefile.in
@@ -0,0 +1,1741 @@
+# Makefile for bash-5.0, version 4.30
+#
+# Copyright (C) 1996-2018 Free Software Foundation, Inc.
+
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# Make sure the first target in the makefile is the right one
+all: .made
+
+PACKAGE = @PACKAGE_NAME@
+VERSION = @PACKAGE_VERSION@
+
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+
+# Include some boilerplate Gnu makefile definitions.
+prefix = @prefix@
+
+exec_prefix = @exec_prefix@
+
+datarootdir = @datarootdir@
+
+bindir = @bindir@
+libdir = @libdir@
+infodir = @infodir@
+includedir = @includedir@
+datadir = @datadir@
+localedir = @localedir@
+pkgconfigdir = ${libdir}/pkgconfig
+
+loadablesdir = @loadablesdir@
+headersdir = @headersdir@
+
+docdir = @docdir@
+
+mandir = @mandir@
+manpfx = man
+
+man1ext = .1
+man1dir = $(mandir)/$(manpfx)1
+man3ext = .3
+man3dir = $(mandir)/$(manpfx)3
+
+htmldir = @htmldir@
+
+# Support an alternate destination root directory for package building
+DESTDIR =
+
+topdir = @top_srcdir@
+BUILD_DIR = @BUILD_DIR@
+top_builddir = @BUILD_DIR@
+srcdir = @srcdir@
+VPATH = @srcdir@
+
+@SET_MAKE@
+CC = @CC@
+CC_FOR_BUILD = @CC_FOR_BUILD@
+YACC = @YACC@
+SHELL = @MAKE_SHELL@
+CP = cp
+RM = rm -f
+AR = @AR@
+ARFLAGS = @ARFLAGS@
+RANLIB = @RANLIB@
+SIZE = @SIZE@
+STRIP = strip
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALLMODE= -m 0755
+INSTALLMODE2 = -m 0555
+
+TESTSCRIPT = @TESTSCRIPT@
+
+DEBUGGER_START_FILE = @DEBUGGER_START_FILE@
+
+#If you have purify, and want to use it, run the make as `make PURIFY=purify'
+#PURIFY = @PURIFY@
+
+# Here is a rule for making .o files from .c files that does not
+# force the type of the machine (like -M_MACHINE) into the flags.
+.c.o:
+	$(RM) $@
+	$(CC) $(CCFLAGS) -c $<
+
+EXEEXT = @EXEEXT@
+OBJEXT = @OBJEXT@
+
+# The name of this program and some version information.
+VERSPROG = bashversion$(EXEEXT)
+VERSOBJ = bashversion.$(OBJEXT)
+
+Program = bash$(EXEEXT)
+Version = @BASHVERS@
+PatchLevel = `$(BUILD_DIR)/$(VERSPROG) -p`
+RELSTATUS = @RELSTATUS@
+
+Machine = @host_cpu@
+OS = @host_os@
+VENDOR = @host_vendor@
+MACHTYPE = @host@
+
+# comment out for release
+DEBUG = @DEBUG@
+MALLOC_DEBUG = @MALLOC_DEBUG@
+
+THIS_SH = $(BUILD_DIR)/$(Program)
+
+# PROFILE_FLAGS is either -pg, to generate profiling info for use
+# with gprof, or nothing (the default).
+PROFILE_FLAGS= @PROFILE_FLAGS@
+
+CFLAGS = @CFLAGS@
+CFLAGS_FOR_BUILD = @CFLAGS_FOR_BUILD@ @CROSS_COMPILE@
+CPPFLAGS = @CPPFLAGS@
+CPPFLAGS_FOR_BUILD = @CPPFLAGS_FOR_BUILD@
+LOCAL_CFLAGS = @LOCAL_CFLAGS@ ${DEBUG} ${MALLOC_DEBUG}
+DEFS = @DEFS@
+LOCAL_DEFS = @LOCAL_DEFS@
+
+LOCALE_DEFS = -DLOCALEDIR='"$(localedir)"' -DPACKAGE='"$(PACKAGE)"'
+
+LOCAL_LIBS = @LOCAL_LIBS@
+LIBS = $(BUILTINS_LIB) $(LIBRARIES) @LIBS@
+LIBS_FOR_BUILD = 
+
+STATIC_LD = @STATIC_LD@
+LOCAL_LDFLAGS = @LOCAL_LDFLAGS@
+
+SYSTEM_FLAGS = -DPROGRAM='"$(Program)"' -DCONF_HOSTTYPE='"$(Machine)"' -DCONF_OSTYPE='"$(OS)"' -DCONF_MACHTYPE='"$(MACHTYPE)"' -DCONF_VENDOR='"$(VENDOR)"' $(LOCALE_DEFS)
+
+BASE_CCFLAGS = $(SYSTEM_FLAGS) $(LOCAL_DEFS) \
+	  $(DEFS) $(LOCAL_CFLAGS) $(INCLUDES)
+
+CCFLAGS = $(ADDON_CFLAGS) $(BASE_CCFLAGS) ${PROFILE_FLAGS} $(CPPFLAGS) $(CFLAGS)
+
+CCFLAGS_FOR_BUILD = $(BASE_CCFLAGS) $(CPPFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD)
+
+BASE_LDFLAGS = @LDFLAGS@ $(LOCAL_LDFLAGS) $(CFLAGS)
+LDFLAGS = ${ADDON_LDFLAGS} ${BASE_LDFLAGS} ${PROFILE_FLAGS} ${STATIC_LD}
+LDFLAGS_FOR_BUILD = @LDFLAGS_FOR_BUILD@ $(LOCAL_LDFLAGS) $(CFLAGS_FOR_BUILD)
+
+ASAN_XCFLAGS = -fsanitize=address -fno-omit-frame-pointer
+ASAN_XLDFLAGS = -fsanitize=address
+
+GCOV_XCFLAGS = -fprofile-arcs -ftest-coverage
+GCOV_XLDFLAGS = -fprofile-arcs -ftest-coverage
+
+INCLUDES = -I. @RL_INCLUDE@ -I$(srcdir) -I$(BASHINCDIR) -I$(LIBSRC) $(INTL_INC)
+
+# Maybe add: -Wextra
+GCC_LINT_FLAGS = -O -Wall -Wshadow -Wpointer-arith -Wcast-qual -Wno-parentheses \
+		 -Wcast-align -Wstrict-prototypes -Wconversion -Wformat \
+		 -Wformat-nonliteral -Wmissing-braces -Wuninitialized \
+		 -Wmissing-declarations  -Winline \
+		 -Wmissing-prototypes -Wtraditional -Wredundant-decls -pedantic
+
+GCC_LINT_CFLAGS = $(BASE_CCFLAGS) $(CPPFLAGS) $(GCC_LINT_FLAGS)
+
+#
+# Support libraries
+# 
+
+dot = .
+
+LIBSUBDIR = lib
+LIBSRC = $(srcdir)/$(LIBSUBDIR)
+
+LIBBUILD = ${BUILD_DIR}/${LIBSUBDIR}
+
+SUBDIR_INCLUDES = -I. @RL_INCLUDE@ -I$(topdir) -I$(topdir)/$(LIBSUBDIR)
+
+BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
+USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
+
+# the bash library
+# the library is a mix of functions that the C library does not provide on
+# some platforms and general shell utility functions
+SH_LIBSRC = $(LIBSRC)/sh
+SH_LIBDIR = $(dot)/${LIBSUBDIR}/sh
+SH_ABSSRC = ${topdir}/${SH_LIBSRC}
+
+SHLIB_SOURCE =	${SH_LIBSRC}/clktck.c ${SH_LIBSRC}/getcwd.c \
+		${SH_LIBSRC}/getenv.c ${SH_LIBSRC}/oslib.c \
+		${SH_LIBSRC}/setlinebuf.c ${SH_LIBSRC}/strchrnul.c \
+		${SH_LIBSRC}/strcasecmp.c ${SH_LIBSRC}/strdup.c \
+		${SH_LIBSRC}/strerror.c \
+		${SH_LIBSRC}/strtod.c ${SH_LIBSRC}/strtol.c \
+		${SH_LIBSRC}/strtoul.c ${SH_LIBSRC}/vprint.c \
+		${SH_LIBSRC}/itos.c ${SH_LIBSRC}/rename.c \
+		${SH_LIBSRC}/zread.c ${SH_LIBSRC}/zwrite.c \
+		${SH_LIBSRC}/shtty.c ${SH_LIBSRC}/inet_aton.c \
+		${SH_LIBSRC}/netopen.c ${SH_LIBSRC}/strpbrk.c \
+		${SH_LIBSRC}/timeval.c ${SH_LIBSRC}/clock.c \
+		${SH_LIBSRC}/makepath.c ${SH_LIBSRC}/pathcanon.c \
+		${SH_LIBSRC}/pathphys.c ${SH_LIBSRC}/stringlist.c \
+		${SH_LIBSRC}/stringvec.c ${SH_LIBSRC}/tmpfile.c \
+		${SH_LIBSRC}/spell.c ${SH_LIBSRC}/strtrans.c \
+		${SH_LIBSRC}/strcasestr.c ${SH_LIBSRC}/shquote.c \
+		${SH_LIBSRC}/snprintf.c ${SH_LIBSRC}/mailstat.c \
+		${SH_LIBSRC}/fmtulong.c ${SH_LIBSRC}/fmtullong.c \
+		${SH_LIBSRC}/strtoll.c ${SH_LIBSRC}/strtoull.c \
+		${SH_LIBSRC}/strtoimax.c ${SH_LIBSRC}/strtoumax.c \
+		${SH_LIBSRC}/fmtumax.c ${SH_LIBSRC}/netconn.c \
+		${SH_LIBSRC}/mktime.c ${SH_LIBSRC}/strftime.c \
+		${SH_LIBSRC}/memset.c ${SH_LIBSRC}/mbschr.c \
+		${SH_LIBSRC}/zcatfd.c ${SH_LIBSRC}/shmatch.c \
+		${SH_LIBSRC}/strnlen.c ${SH_LIBSRC}/winsize.c \
+		${SH_LIBSRC}/eaccess.c ${SH_LIBSRC}/wcsdup.c \
+		${SH_LIBSRC}/zmapfd.c ${SH_LIBSRC}/fpurge.c \
+		${SH_LIBSRC}/zgetline.c ${SH_LIBSRC}/mbscmp.c \
+		${SH_LIBSRC}/casemod.c ${SH_LIBSRC}/uconvert.c \
+		${SH_LIBSRC}/ufuncs.c ${SH_LIBSRC}/dprintf.c \
+		${SH_LIBSRC}/input_avail.c ${SH_LIBSRC}/mbscasecmp.c \
+		${SH_LIBSRC}/fnxform.c ${SH_LIBSRC}/unicode.c \
+		${SH_LIBSRC}/wcswidth.c ${SH_LIBSRC}/wcsnwidth.c \
+		${SH_LIBSRC}/shmbchar.c ${SH_LIBSRC}/utf8.c \
+		${SH_LIBSRC}/random.c ${SH_LIBSRC}/gettimeofday.c
+
+SHLIB_LIB = -lsh
+SHLIB_LIBNAME = libsh.a
+SHLIB_LIBRARY = ${SH_LIBDIR}/${SHLIB_LIBNAME}
+SHLIB_LDFLAGS = -L${SH_LIBDIR}
+SHLIB_DEP = ${SHLIB_LIBRARY}
+
+# we assume for now that readline source is being shipped with bash
+RL_LIBSRC = $(LIBSRC)/readline
+RL_LIBDOC = $(RL_LIBSRC)/doc
+RL_LIBDIR = @RL_LIBDIR@
+RL_ABSSRC = ${topdir}/$(RL_LIBDIR)
+
+RL_INCLUDEDIR = @RL_INCLUDEDIR@
+
+READLINE_LIB = @READLINE_LIB@
+READLINE_LIBRARY = $(RL_LIBDIR)/libreadline.a
+READLINE_LDFLAGS = -L${RL_LIBDIR}
+READLINE_DEP = @READLINE_DEP@
+
+# The source, object and documentation of the GNU Readline library.
+READLINE_SOURCE	= $(RL_LIBSRC)/rldefs.h $(RL_LIBSRC)/rlconf.h \
+		  $(RL_LIBSRC)/readline.h $(RL_LIBSRC)/tcap.h \
+		  $(RL_LIBSRC)/chardefs.h $(RL_LIBSRC)/keymaps.h \
+		  $(RL_LIBSRC)/history.h $(RL_LIBSRC)/histlib.h \
+		  $(RL_LIBSRC)/posixstat.h $(RL_LIBSRC)/tilde.h \
+		  $(RL_LIBSRC)/rlstdc.h ${RL_LIBSRC}/xmalloc.h \
+		  $(RL_LIBSRC)/rlshell.h ${RL_LIBSRC}/rlprivate.h \
+		  $(RL_LIBSRC)/colors.h  $(RL_LIBSRC)/parse-colors.h \
+		  $(RL_LIBSRC)/funmap.c $(RL_LIBSRC)/emacs_keymap.c \
+		  $(RL_LIBSRC)/search.c $(RL_LIBSRC)/vi_keymap.c \
+		  $(RL_LIBSRC)/keymaps.c $(RL_LIBSRC)/parens.c \
+		  $(RL_LIBSRC)/vi_mode.c $(RL_LIBSRC)/callback.c \
+		  $(RL_LIBSRC)/readline.c $(RL_LIBSRC)/tilde.c \
+		  $(RL_LIBSRC)/rltty.c $(RL_LIBSRC)/complete.c \
+		  $(RL_LIBSRC)/bind.c $(RL_LIBSRC)/isearch.c \
+		  $(RL_LIBSRC)/display.c $(RL_LIBSRC)/signals.c \
+		  $(RL_LIBSRC)/util.c $(RL_LIBSRC)/kill.c $(RL_LIBSRC)/text.c \
+		  $(RL_LIBSRC)/undo.c $(RL_LIBSRC)/macro.c \
+		  $(RL_LIBSRC)/terminal.c $(RL_LIBSRC)/nls.c \
+		  $(RL_LIBSRC)/input.c $(RL_LIBSRC)/xmalloc.c \
+		  $(RL_LIBSRC)/shell.c $(RL_LIBSRC)/savestring.c \
+		  $(RL_LIBSRC)/colors.c $(RL_LIBSRC)/parse-colors.c \
+		  $(RL_LIBSRC)/misc.c $(RL_LIBSRC)/mbutil.c $(RL_LIBSRC)/compat.c \
+		  $(RL_LIBSRC)/histexpand.c $(RL_LIBSRC)/history.c \
+		  $(RL_LIBSRC)/histsearch.c $(RL_LIBSRC)/histfile.c
+
+READLINE_OBJ	= $(RL_LIBDIR)/readline.o $(RL_LIBDIR)/funmap.o \
+		  $(RL_LIBDIR)/parens.o $(RL_LIBDIR)/search.o \
+		  $(RL_LIBDIR)/keymaps.o $(RL_LIBDIR)/xmalloc.o \
+		  $(RL_LIBDIR)/rltty.o $(RL_LIBDIR)/complete.o \
+		  $(RL_LIBDIR)/bind.o $(RL_LIBDIR)/isearch.o \
+		  $(RL_LIBDIR)/display.o $(RL_LIBDIR)/signals.o \
+		  $(RL_LIBDIR)/tilde.o $(RL_LIBDIR)/util.o \
+		  $(RL_LIBDIR)/kill.o $(RL_LIBDIR)/undo.o $(RL_LIBDIR)/nls.o \
+		  $(RL_LIBDIR)/macro.o $(RL_LIBDIR)/input.o \
+		  $(RL_LIBDIR)/terminal.o $(RL_LIBDIR)/callback.o \
+		  $(RL_LIBDIR)/shell.o $(RL_LIBDIR)/savestring.o \
+		  $(RL_LIBDIR)/mbutil.o $(RL_LIBDIR)/compat.o \
+		  $(RL_LIBDIR)/history.o $(RL_LIBDIR)/histexpand.o \
+		  $(RL_LIBDIR)/histsearch.o $(RL_LIBDIR)/histfile.o \
+		  $(RL_LIBDIR)/colors.o $(RL_LIBDIR)/parse-colors.o
+
+HIST_LIBSRC = $(LIBSRC)/readline
+HIST_LIBDIR = @HIST_LIBDIR@
+HIST_ABSSRC = ${topdir}/$(HIST_LIBDIR)
+
+HISTORY_LIB = @HISTORY_LIB@
+HISTORY_LIBRARY = $(HIST_LIBDIR)/libhistory.a
+HISTORY_LDFLAGS = -L$(HIST_LIBDIR)
+HISTORY_DEP = @HISTORY_DEP@
+
+# The source, object and documentation of the history library.
+HISTORY_SOURCE	= $(HIST_LIBSRC)/history.c $(HIST_LIBSRC)/histexpand.c \
+		  $(HIST_LIBSRC)/histsearch.c $(HIST_LIBSRC)/histfile.c \
+		  $(HIST_LIBSRC)/shell.c \
+		  $(HIST_LIBSRC)/history.h $(HIST_LIBSRC)/histlib.h
+HISTORY_OBJ	= $(HIST_LIBDIR)/history.o $(HIST_LIBDIR)/histexpand.o \
+		  $(HIST_LIBDIR)/histsearch.o $(HIST_LIBDIR)/histfile.o \
+		  $(HIST_LIBDIR)/shell.o
+
+# You only need termcap (or curses) if you are linking with GNU Readline.
+TERM_LIBSRC = $(LIBSRC)/termcap
+TERM_LIBDIR = $(dot)/$(LIBSUBDIR)/termcap
+TERM_ABSSRC = ${topdir}/$(TERM_LIBDIR)
+
+TERMCAP_LIB = @TERMCAP_LIB@
+TERMCAP_LIBRARY = $(TERM_LIBDIR)/libtermcap.a
+TERMCAP_LDFLAGS = -L$(TERM_LIBDIR)
+TERMCAP_DEP = @TERMCAP_DEP@
+
+TERMCAP_SOURCE	= $(TERM_LIBSRC)/termcap.c $(TERM_LIBSRC)/tparam.c
+TERMCAP_OBJ	= $(TERM_LIBDIR)/termcap.o $(TERM_LIBDIR)/tparam.o
+
+GLOB_LIBSRC = $(LIBSRC)/glob
+GLOB_LIBDIR = $(dot)/$(LIBSUBDIR)/glob
+GLOB_ABSSRC = ${topdir}/$(GLOB_LIBDIR)
+
+GLOB_LIB     = -lglob
+GLOB_LIBRARY = $(GLOB_LIBDIR)/libglob.a
+GLOB_LDFLAGS = -L$(GLOB_LIBDIR)
+GLOB_DEP = $(GLOB_LIBRARY)
+
+GLOB_SOURCE = $(GLOB_LIBSRC)/glob.c $(GLOB_LIBSRC)/strmatch.c \
+	      $(GLOB_LIBSRC)/smatch.c $(GLOB_LIBSRC)/xmbsrtowcs.c \
+	      $(GLOB_LIBSRC)/glob_loop.c $(GLOB_LIBSRC)/sm_loop.c \
+	      $(GLOB_LIBSRC)/gmisc.c \
+	      $(GLOB_LIBSRC)/glob.h $(GLOB_LIBSRC)/strmatch.h
+GLOB_OBJ    = $(GLOB_LIBDIR)/glob.o $(GLOB_LIBDIR)/strmatch.o \
+	      $(GLOB_LIBDIR)/smatch.o $(GLOB_LIBDIR)/xmbsrtowcs.o \
+	      $(GLOB_LIBDIR)/gmisc.o
+
+# The source, object and documentation for the GNU Tilde library.
+TILDE_LIBSRC = $(LIBSRC)/tilde
+TILDE_LIBDIR = $(dot)/$(LIBSUBDIR)/tilde
+TILDE_ABSSRC = ${topdir}/$(TILDE_LIBDIR)
+
+TILDE_LIB = @TILDE_LIB@
+TILDE_LIBRARY = $(TILDE_LIBDIR)/libtilde.a
+TILDE_LDFLAGS = -L$(TILDE_LIBDIR)
+TILDE_DEP = $(TILDE_LIBRARY)
+
+TILDE_SOURCE	= $(TILDE_LIBSRC)/tilde.c $(TILDE_LIBSRC)/tilde.h
+TILDE_OBJ	= $(TILDE_LIBDIR)/tilde.o
+
+# libintl
+INTL_LIBSRC = $(LIBSRC)/intl
+INTL_LIBDIR = $(dot)/$(LIBSUBDIR)/intl
+INTL_ABSSRC = ${topdir}/$(INTL_LIB)
+INTL_BUILDDIR = ${LIBBUILD}/intl
+
+INTL_LIB     = @LIBINTL@
+INTL_LIBRARY = $(INTL_LIBDIR)/libintl.a
+INTL_DEP = @INTL_DEP@
+INTL_INC = @INTL_INC@
+
+LIBINTL_H = @LIBINTL_H@
+
+# libiconv
+LIBICONV = @LIBICONV@
+
+# tests
+LIBINTL = @LIBINTL@
+LTLIBINTL = @LTLIBINTL@
+INTLLIBS = @INTLLIBS@
+INTLOBJS = @INTLOBJS@
+
+# Our malloc.
+MALLOC_TARGET = @MALLOC_TARGET@
+
+# set to alloca.o if we are using the C alloca in lib/malloc
+ALLOCA = @ALLOCA@
+
+ALLOC_LIBSRC = $(LIBSRC)/malloc
+ALLOC_LIBDIR = $(dot)/$(LIBSUBDIR)/malloc
+ALLOC_ABSSRC = ${topdir}/$(ALLOC_LIBDIR)
+
+MALLOC_SRC = @MALLOC_SRC@
+MALLOC_OTHERSRC = ${ALLOC_LIBSRC}/trace.c ${ALLOC_LIBSRC}/stats.c \
+		  ${ALLOC_LIBSRC}/table.c ${ALLOC_LIBSRC}/watch.c
+MALLOC_SOURCE = ${ALLOC_LIBSRC}/${MALLOC_SRC} ${MALLOC_OTHERSRC}
+MALLOC_CFLAGS = -DRCHECK -Dbotch=programming_error ${MALLOC_DEBUG}
+
+MALLOC_LIB     = @MALLOC_LIB@
+MALLOC_LIBRARY = @MALLOC_LIBRARY@
+MALLOC_LDFLAGS = @MALLOC_LDFLAGS@
+MALLOC_DEP = @MALLOC_DEP@
+
+ALLOC_HEADERS = $(ALLOC_LIBSRC)/getpagesize.h $(ALLOC_LIBSRC)/shmalloc.h \
+		$(ALLOC_LIBSRC)/imalloc.h $(ALLOC_LIBSRC)/mstats.h \
+		$(ALLOC_LIBSRC)/table.h $(ALLOC_LIBSRC)/watch.h
+
+$(MALLOC_LIBRARY):	${MALLOC_SOURCE} ${ALLOC_HEADERS} config.h
+		@(cd $(ALLOC_LIBDIR) && \
+		 $(MAKE) $(MFLAGS) \
+		 MALLOC_CFLAGS="$(MALLOC_CFLAGS)" ${MALLOC_TARGET} ) || exit 1
+
+BASHINCDIR = ${srcdir}/include
+BASHINCFILES =	 $(BASHINCDIR)/posixstat.h $(BASHINCDIR)/ansi_stdlib.h \
+		 $(BASHINCDIR)/filecntl.h $(BASHINCDIR)/posixdir.h \
+		 $(BASHINCDIR)/memalloc.h $(BASHINCDIR)/stdc.h \
+		 $(BASHINCDIR)/posixjmp.h $(BASHINCDIR)/posixwait.h \
+		 $(BASHINCDIR)/posixtime.h $(BASHINCDIR)/systimes.h \
+		 $(BASHINCDIR)/unionwait.h $(BASHINCDIR)/maxpath.h \
+		 $(BASHINCDIR)/shtty.h $(BASHINCDIR)/typemax.h \
+		 $(BASHINCDIR)/ocache.h
+
+LIBRARIES = $(GLOB_LIB) $(SHLIB_LIB) $(READLINE_LIB) $(HISTORY_LIB) $(TERMCAP_LIB) \
+	    $(TILDE_LIB) $(MALLOC_LIB) $(INTL_LIB) $(LIBICONV) $(LOCAL_LIBS)
+
+LIBDEP = $(GLOB_DEP) $(SHLIB_DEP) $(INTL_DEP) $(READLINE_DEP) $(HISTORY_DEP) $(TERMCAP_DEP) \
+	 $(TILDE_DEP) $(MALLOC_DEP)
+
+LIBRARY_LDFLAGS = $(READLINE_LDFLAGS) $(HISTORY_LDFLAGS) $(GLOB_LDFLAGS) \
+		  $(TILDE_LDFLAGS) $(MALLOC_LDFLAGS) $(SHLIB_LDFLAGS)
+
+#
+# The shell itself
+#
+
+# The main source code for the Bourne Again SHell.
+CSOURCES = shell.c eval.c parse.y general.c make_cmd.c print_cmd.c y.tab.c \
+	   dispose_cmd.c execute_cmd.c variables.c $(GLOBC) version.c \
+	   expr.c copy_cmd.c flags.c subst.c hashcmd.c hashlib.c mailcheck.c \
+	   test.c trap.c alias.c jobs.c nojobs.c $(ALLOC_FILES) braces.c \
+	   input.c bashhist.c array.c arrayfunc.c assoc.c sig.c pathexp.c \
+	   unwind_prot.c siglist.c bashline.c bracecomp.c error.c \
+	   list.c stringlib.c locale.c findcmd.c redir.c \
+	   pcomplete.c pcomplib.c syntax.c xmalloc.c
+
+HSOURCES = shell.h flags.h trap.h hashcmd.h hashlib.h jobs.h builtins.h \
+	   general.h variables.h config.h $(ALLOC_HEADERS) alias.h \
+	   quit.h unwind_prot.h syntax.h ${GRAM_H} \
+	   command.h input.h error.h bashansi.h dispose_cmd.h make_cmd.h \
+	   subst.h externs.h siglist.h bashhist.h bashline.h bashtypes.h \
+	   array.h arrayfunc.h sig.h mailcheck.h bashintl.h bashjmp.h \
+	   execute_cmd.h parser.h pathexp.h pathnames.h pcomplete.h assoc.h \
+	   $(BASHINCFILES)
+
+SOURCES	 = $(CSOURCES) $(HSOURCES) $(BUILTIN_DEFS)
+
+# headers in top-level source directory that get installed by install-headers
+INSTALLED_HEADERS = shell.h bashjmp.h command.h syntax.h general.h error.h \
+		    variables.h array.h assoc.h arrayfunc.h quit.h dispose_cmd.h \
+		    make_cmd.h subst.h sig.h externs.h builtins.h \
+		    bashtypes.h xmalloc.h config-top.h config-bot.h \
+		    bashintl.h bashansi.h bashjmp.h alias.h hashlib.h \
+		    conftypes.h unwind_prot.h jobs.h siglist.h
+INSTALLED_BUILTINS_HEADERS = bashgetopt.h common.h getopt.h
+INSTALLED_INCFILES =	 posixstat.h ansi_stdlib.h filecntl.h posixdir.h \
+	memalloc.h stdc.h posixjmp.h posixwait.h posixtime.h systimes.h \
+	unionwait.h maxpath.h shtty.h typemax.h ocache.h chartypes.h gettext.h \
+	posixstat.h shmbchar.h shmbutil.h stat-time.h
+
+# header files chosen based on running of configure
+SIGNAMES_H = @SIGNAMES_H@
+
+# object files chosen based on running of configure
+JOBS_O = @JOBS_O@
+SIGLIST_O = @SIGLIST_O@
+SIGNAMES_O = @SIGNAMES_O@
+
+# Matching object files.
+OBJECTS	 = shell.o eval.o y.tab.o general.o make_cmd.o print_cmd.o $(GLOBO) \
+	   dispose_cmd.o execute_cmd.o variables.o copy_cmd.o error.o \
+	   expr.o flags.o $(JOBS_O) subst.o hashcmd.o hashlib.o mailcheck.o \
+	   trap.o input.o unwind_prot.o pathexp.o sig.o test.o version.o \
+	   alias.o array.o arrayfunc.o assoc.o braces.o bracecomp.o bashhist.o \
+	   bashline.o $(SIGLIST_O) list.o stringlib.o locale.o findcmd.o redir.o \
+	   pcomplete.o pcomplib.o syntax.o xmalloc.o $(SIGNAMES_O)
+
+# Where the source code of the shell builtins resides.
+BUILTIN_SRCDIR=$(srcdir)/builtins
+DEFSRC=$(BUILTIN_SRCDIR)
+BUILTIN_ABSSRC=${topdir}/builtins
+DEFDIR = $(dot)/builtins
+DEBUGGER_DIR = $(dot)/debugger
+
+BUILTIN_DEFS = $(DEFSRC)/alias.def $(DEFSRC)/bind.def $(DEFSRC)/break.def \
+	       $(DEFSRC)/builtin.def $(DEFSRC)/cd.def $(DEFSRC)/colon.def \
+	       $(DEFSRC)/command.def ${DEFSRC}/complete.def \
+	       $(DEFSRC)/caller.def $(DEFSRC)/declare.def \
+	       $(DEFSRC)/echo.def $(DEFSRC)/enable.def $(DEFSRC)/eval.def \
+	       $(DEFSRC)/exec.def $(DEFSRC)/exit.def $(DEFSRC)/fc.def \
+	       $(DEFSRC)/fg_bg.def $(DEFSRC)/hash.def $(DEFSRC)/help.def \
+	       $(DEFSRC)/history.def $(DEFSRC)/jobs.def $(DEFSRC)/kill.def \
+	       $(DEFSRC)/let.def $(DEFSRC)/read.def $(DEFSRC)/return.def \
+	       $(DEFSRC)/set.def $(DEFSRC)/setattr.def $(DEFSRC)/shift.def \
+	       $(DEFSRC)/source.def $(DEFSRC)/suspend.def $(DEFSRC)/test.def \
+	       $(DEFSRC)/times.def $(DEFSRC)/trap.def $(DEFSRC)/type.def \
+	       $(DEFSRC)/ulimit.def $(DEFSRC)/umask.def $(DEFSRC)/wait.def \
+	       $(DEFSRC)/getopts.def $(DEFSRC)/reserved.def \
+	       $(DEFSRC)/pushd.def $(DEFSRC)/shopt.def $(DEFSRC)/printf.def \
+	       $(DEFSRC)/mapfile.def
+BUILTIN_C_SRC  = $(DEFSRC)/mkbuiltins.c $(DEFSRC)/common.c \
+		 $(DEFSRC)/evalstring.c $(DEFSRC)/evalfile.c \
+		 $(DEFSRC)/bashgetopt.c $(GETOPT_SOURCE)
+BUILTIN_C_OBJ  = $(DEFDIR)/common.o $(DEFDIR)/evalstring.o \
+		 $(DEFDIR)/evalfile.o $(DEFDIR)/bashgetopt.o
+BUILTIN_OBJS = $(DEFDIR)/alias.o $(DEFDIR)/bind.o $(DEFDIR)/break.o \
+	       $(DEFDIR)/builtin.o $(DEFDIR)/cd.o $(DEFDIR)/colon.o \
+	       $(DEFDIR)/command.o $(DEFDIR)/caller.o $(DEFDIR)/declare.o \
+	       $(DEFDIR)/echo.o $(DEFDIR)/enable.o $(DEFDIR)/eval.o \
+	       $(DEFDIR)/exec.o $(DEFDIR)/exit.o $(DEFDIR)/fc.o \
+	       $(DEFDIR)/fg_bg.o $(DEFDIR)/hash.o $(DEFDIR)/help.o \
+	       $(DEFDIR)/history.o $(DEFDIR)/jobs.o $(DEFDIR)/kill.o \
+	       $(DEFDIR)/let.o $(DEFDIR)/pushd.o $(DEFDIR)/read.o \
+	       $(DEFDIR)/return.o $(DEFDIR)/shopt.o $(DEFDIR)/printf.o \
+	       $(DEFDIR)/set.o $(DEFDIR)/setattr.o $(DEFDIR)/shift.o \
+	       $(DEFDIR)/source.o $(DEFDIR)/suspend.o $(DEFDIR)/test.o \
+	       $(DEFDIR)/times.o $(DEFDIR)/trap.o $(DEFDIR)/type.o \
+	       $(DEFDIR)/ulimit.o $(DEFDIR)/umask.o $(DEFDIR)/wait.o \
+	       $(DEFDIR)/getopts.o $(DEFDIR)/mapfile.o $(BUILTIN_C_OBJ)
+GETOPT_SOURCE   = $(DEFSRC)/getopt.c $(DEFSRC)/getopt.h
+PSIZE_SOURCE	= $(DEFSRC)/psize.sh $(DEFSRC)/psize.c
+
+BUILTINS_LIBRARY = $(DEFDIR)/libbuiltins.a
+BUILTINS_LIB = -lbuiltins
+BUILTINS_LDFLAGS = -L$(DEFDIR)
+BUILTINS_DEP = $(BUILTINS_LIBRARY)
+
+# Documentation for the shell.
+DOCSRC = $(srcdir)/doc
+DOCDIR = $(dot)/doc
+
+# Translations and other i18n support files
+PO_SRC = $(srcdir)/po/
+PO_DIR = $(dot)/po/
+
+SIGNAMES_SUPPORT = $(SUPPORT_SRC)mksignames.c
+
+SUPPORT_SRC = $(srcdir)/support/
+SDIR = $(dot)/support
+
+TESTS_SUPPORT = recho$(EXEEXT) zecho$(EXEEXT) printenv$(EXEEXT) xcase$(EXEEXT)
+CREATED_SUPPORT = signames.h recho$(EXEEXT) zecho$(EXEEXT) printenv$(EXEEXT) \
+		  tests/recho$(EXEEXT) tests/zecho$(EXEEXT) \
+		  tests/printenv$(EXEEXT) xcase$(EXEEXT) tests/xcase$(EXEEXT) \
+		  mksignames$(EXEEXT) lsignames.h \
+		  mksyntax${EXEEXT} syntax.c $(VERSPROG) $(VERSOBJ) \
+		  buildversion.o mksignames.o signames.o buildsignames.o
+CREATED_CONFIGURE = config.h config.cache config.status config.log \
+		    stamp-h po/POTFILES config.status.lineno
+CREATED_MAKEFILES = Makefile builtins/Makefile doc/Makefile \
+		    lib/readline/Makefile lib/glob/Makefile \
+		    lib/sh/Makefile lib/tilde/Makefile lib/malloc/Makefile \
+		    lib/termcap/Makefile examples/loadables/Makefile \
+		    examples/loadables/Makefile.inc \
+		    examples/loadables/perl/Makefile support/Makefile \
+		    lib/intl/Makefile po/Makefile po/Makefile.in
+CREATED_HEADERS = signames.h config.h pathnames.h version.h y.tab.h \
+		  ${DEFDIR}/builtext.h
+
+OTHER_DOCS = $(srcdir)/CHANGES $(srcdir)/COMPAT $(srcdir)/NEWS $(srcdir)/POSIX \
+	$(srcdir)/RBASH $(srcdir)/README
+OTHER_INSTALLED_DOCS = CHANGES COMPAT NEWS POSIX RBASH README
+
+LOADABLES_DIR = ${top_builddir}/examples/loadables
+
+# Keep GNU Make from exporting the entire environment for small machines.
+.NOEXPORT:
+
+.made: $(Program) bashbug $(SDIR)/man2html$(EXEEXT)
+	@echo "$(Program) last made for a $(Machine) running $(OS)" >.made
+
+$(Program):  .build $(OBJECTS) $(BUILTINS_DEP) $(LIBDEP)
+	$(RM) $@
+	$(PURIFY) $(CC) $(BUILTINS_LDFLAGS) $(LIBRARY_LDFLAGS) $(LDFLAGS) -o $(Program) $(OBJECTS) $(LIBS)
+	ls -l $(Program)
+	-$(SIZE) $(Program)
+
+.build:	$(SOURCES) config.h Makefile version.h $(VERSPROG)
+	@echo
+	@echo "	  ***********************************************************"
+	@echo "	  *                                                         *"
+	@echo "	  * `$(BUILD_DIR)/$(VERSPROG) -l`"
+	@echo "	  *                                                         *"
+	@echo "	  ***********************************************************"
+	@echo
+
+bashbug: $(SDIR)/bashbug.sh $(VERSPROG)
+	@sed -e "s%!PATCHLEVEL!%$(PatchLevel)%" \
+	     $(SDIR)/bashbug.sh > $@
+	@chmod a+rx bashbug
+
+strip:	$(Program) .made
+	$(STRIP) $(Program)
+	ls -l $(Program)
+	-$(SIZE) $(Program)
+
+lint:
+	${MAKE} ${MFLAGS} CFLAGS='${GCC_LINT_FLAGS}' .made
+
+asan:
+	${MAKE} ${MFLAGS} ADDON_CFLAGS='${ASAN_XCFLAGS}' ADDON_LDFLAGS='${ASAN_XLDFLAGS}' .made
+
+# cheating
+gcov:
+	${MAKE} ${MFLAGS} CFLAGS=-g ADDON_CFLAGS='${GCOV_XCFLAGS}' ADDON_LDFLAGS='${GCOV_XLDFLAGS}' .made
+
+
+# have to make this separate because making tests depend on $(PROGRAM)
+asan-tests: asan  $(TESTS_SUPPORT)
+	@-test -d tests || mkdir tests
+	@cp $(TESTS_SUPPORT) tests
+	@( cd $(srcdir)/tests && \
+		BUILD_DIR=$(BUILD_DIR) PATH=$(BUILD_DIR)/tests:$$PATH THIS_SH=$(THIS_SH) $(SHELL) ${TESTSCRIPT} )
+
+profiling-tests:	${PROGRAM}
+	@test "X$$PROFILE_FLAGS" == "X" && { echo "profiling-tests: must be built with profiling enabled" >&2; exit 1; }
+	@${MAKE} ${MFLAGS} tests TESTSCRIPT=run-gprof
+
+version.h:  $(SOURCES) config.h Makefile patchlevel.h
+	$(SHELL) $(SUPPORT_SRC)mkversion.sh -b -S ${topdir} -s $(RELSTATUS) -d $(Version) -o newversion.h \
+		&& mv newversion.h version.h
+
+bashversion$(EXEEXT): buildversion.o $(SUPPORT_SRC)bashversion.c
+	$(CC_FOR_BUILD) $(CCFLAGS_FOR_BUILD) ${LDFLAGS_FOR_BUILD} -o $@ $(SUPPORT_SRC)bashversion.c buildversion.o ${LIBS_FOR_BUILD}
+
+buildversion.o: $(srcdir)/version.c
+	$(CC_FOR_BUILD) $(CCFLAGS_FOR_BUILD) -DBUILDTOOL -c -o $@ $(srcdir)/version.c
+
+buildversion.o: bashintl.h $(BASHINCDIR)/gettext.h
+buildversion.o: version.h patchlevel.h conftypes.h
+
+# old rules
+GRAM_H = parser-built
+y.tab.o: y.tab.h y.tab.c ${GRAM_H} command.h ${BASHINCDIR}/stdc.h input.h
+${GRAM_H}:	y.tab.h
+	@-if test -f y.tab.h ; then \
+		cmp -s $@ y.tab.h 2>/dev/null || cp -p y.tab.h $@; \
+	fi
+
+y.tab.c: parse.y
+#	-if test -f y.tab.h; then mv -f y.tab.h old-y.tab.h; fi
+	$(YACC) -d $(srcdir)/parse.y
+	touch parser-built
+#	-if cmp -s old-y.tab.h y.tab.h; then mv old-y.tab.h y.tab.h; else cp -p y.tab.h ${GRAM_H}; fi
+
+y.tab.h: y.tab.c
+	@true
+
+ 
+# Subdirs will often times want version.h, so they'll change back up to
+# the top level and try to create it.  This causes parallel build issues
+# so just force top level sanity before we descend.
+$(LIBDEP): .build
+#$(LIBDEP): version.h
+
+$(READLINE_LIBRARY): config.h $(READLINE_SOURCE)
+	@echo making $@ in ${RL_LIBDIR}
+	@( { test "${RL_LIBDIR}" = "${libdir}" && exit 0; } || \
+		cd ${RL_LIBDIR} && $(MAKE) $(MFLAGS) DEBUG=${DEBUG} libreadline.a) || exit 1
+
+$(HISTORY_LIBRARY): config.h $(HISTORY_SOURCE) $(READLINE_DEP)
+	@echo making $@ in ${HIST_LIBDIR}
+	@( { test "${HIST_LIBDIR}" = "${libdir}" && exit 0; } || \
+		cd ${HIST_LIBDIR} && $(MAKE) $(MFLAGS) DEBUG=${DEBUG} libhistory.a) || exit 1
+
+$(GLOB_LIBRARY): config.h $(GLOB_SOURCE)
+	@echo making $@ in ${GLOB_LIBDIR}
+	@(cd ${GLOB_LIBDIR} && \
+		$(MAKE) $(MFLAGS) DEBUG=${DEBUG} libglob.a) || exit 1
+
+$(TILDE_LIBRARY): config.h $(TILDE_SOURCE)
+	@echo making $@ in ${TILDE_LIBDIR}
+	@(cd ${TILDE_LIBDIR} && \
+		$(MAKE) $(MFLAGS) libtilde.a) || exit 1
+
+$(TERMCAP_LIBRARY): config.h ${TERMCAP_SOURCE}
+	@echo making $@ in ${TERM_LIBDIR}	
+	@(cd ${TERM_LIBDIR} && \
+		$(MAKE) $(MFLAGS) libtermcap.a) || exit 1
+
+$(SHLIB_LIBRARY): config.h ${SHLIB_SOURCE}
+	@echo making $@ in ${SH_LIBDIR}
+	@(cd ${SH_LIBDIR} && \
+		$(MAKE) $(MFLAGS) DEBUG=${DEBUG} ${SHLIB_LIBNAME}) || exit 1
+
+${INTL_LIBRARY}: config.h ${INTL_LIBDIR}/Makefile
+	@echo making $@ in ${INTL_LIBDIR}
+	@(cd ${INTL_LIBDIR} && \
+		$(MAKE) $(MFLAGS) XCFLAGS="${LOCAL_CFLAGS}" all) || exit 1
+
+${LIBINTL_H}:	${INTL_DEP}
+
+signames.o: $(SUPPORT_SRC)signames.c
+	$(RM) $@
+	$(CC) $(CCFLAGS) -c $(SUPPORT_SRC)signames.c
+
+buildsignames.o:	$(SUPPORT_SRC)signames.c
+	$(RM) $@
+	$(CC_FOR_BUILD) $(CCFLAGS_FOR_BUILD) -DBUILDTOOL -o $@ -c $(SUPPORT_SRC)signames.c
+
+mksignames.o:	$(SUPPORT_SRC)mksignames.c
+	$(RM) $@
+	$(CC_FOR_BUILD) $(CCFLAGS_FOR_BUILD) -DBUILDTOOL -c $(SUPPORT_SRC)mksignames.c
+
+mksignames$(EXEEXT):	mksignames.o buildsignames.o
+	$(RM) $@
+	$(CC_FOR_BUILD) $(CCFLAGS_FOR_BUILD) ${LDFLAGS_FOR_BUILD} -o $@ mksignames.o buildsignames.o ${LIBS_FOR_BUILD}
+
+mksyntax$(EXEEXT):	${srcdir}/mksyntax.c config.h syntax.h ${BASHINCDIR}/chartypes.h bashansi.h
+	$(RM) $@
+	${CC_FOR_BUILD} ${CCFLAGS_FOR_BUILD} ${LDFLAGS_FOR_BUILD} -o $@ ${srcdir}/mksyntax.c ${LIBS_FOR_BUILD}
+
+# make a list of signals for the local system -- this is done when we're
+# *not* cross-compiling
+lsignames.h:   mksignames$(EXEEXT)
+	$(RM) $@
+	./mksignames$(EXEEXT) $@
+
+# copy the correct signames header file to signames.h
+signames.h: $(SIGNAMES_H)
+	-if cmp -s $(SIGNAMES_H) $@ ; then :; else $(RM) $@ ; $(CP) $(SIGNAMES_H) $@ ; fi
+
+syntax.c:	mksyntax${EXEEXT} $(srcdir)/syntax.h 
+	$(RM) $@
+	./mksyntax$(EXEEXT) -o $@
+
+$(BUILTINS_LIBRARY): $(BUILTIN_DEFS) $(BUILTIN_C_SRC) config.h ${BASHINCDIR}/memalloc.h $(DEFDIR)/builtext.h version.h
+	@(cd $(DEFDIR) && $(MAKE) $(MFLAGS) DEBUG=${DEBUG} targets ) || exit 1
+
+# these require special rules to circumvent make builtin rules
+${DEFDIR}/common.o:	$(BUILTIN_SRCDIR)/common.c
+	@(cd $(DEFDIR) && $(MAKE) $(MFLAGS) DEBUG=${DEBUG} common.o) || exit 1
+
+${DEFDIR}/bashgetopt.o:	$(BUILTIN_SRCDIR)/bashgetopt.c
+	@(cd $(DEFDIR) && $(MAKE) $(MFLAGS) DEBUG=${DEBUG} bashgetopt.o) || exit 1
+
+${DEFDIR}/builtext.h: $(BUILTIN_DEFS)
+	@(cd $(DEFDIR) && $(MAKE) $(MFLAGS) builtext.h ) || exit 1
+
+${DEFDIR}/pipesize.h:
+	@(cd $(DEFDIR) && $(MAKE) $(MFLAGS) pipesize.h ) || exit 1
+
+$(SDIR)/man2html$(EXEEXT):	${SUPPORT_SRC}/man2html.c
+	@(cd $(SDIR) && $(MAKE) $(MFLAGS) all ) || exit 1
+
+# For the justification of the following Makefile rules, see node
+# `Automatic Remaking' in GNU Autoconf documentation.
+
+Makefile makefile:	config.status $(srcdir)/Makefile.in
+	CONFIG_FILES=Makefile CONFIG_HEADERS= $(SHELL) ./config.status
+
+Makefiles makefiles:	config.status $(srcdir)/Makefile.in
+	@for mf in $(CREATED_MAKEFILES); do \
+		CONFIG_FILES=$$mf CONFIG_HEADERS= $(SHELL) ./config.status || exit 1; \
+	done
+
+config.h:	stamp-h 
+
+stamp-h:	config.status $(srcdir)/config.h.in $(srcdir)/config-top.h $(srcdir)/config-bot.h
+	CONFIG_FILES= CONFIG_HEADERS=config.h $(SHELL) ./config.status
+
+config.status:	$(srcdir)/configure
+	$(SHELL) ./config.status --recheck
+
+pathnames.h:		Makefile $(srcdir)/pathnames.h.in
+	@sed -e 's|@DEBUGGER_START_FILE\@|${DEBUGGER_START_FILE}|g' $(srcdir)/pathnames.h.in > pathnames.tmp
+	@if test -f $@; then \
+		cmp -s pathnames.tmp $@ || mv pathnames.tmp $@; \
+	else \
+		mv pathnames.tmp $@; \
+	fi
+	@${RM} pathnames.tmp
+
+# comment out for distribution
+$(srcdir)/configure:	$(srcdir)/configure.ac $(srcdir)/aclocal.m4 $(srcdir)/config.h.in
+	cd $(srcdir) && autoconf
+
+# for chet
+reconfig: force
+	sh $(srcdir)/configure -C
+
+loadables:
+	cd $(LOADABLES_DIR) && $(MAKE) $(MFLAGS) all
+
+#newversion:	mkversion
+#	$(RM) .build
+#	./mkversion -dir $(srcdir) -dist
+#	mv -f newversion.h version.h
+#	$(MAKE) -f $(srcdir)/Makefile $(MFLAGS) srcdir=$(srcdir)
+
+doc documentation:  force
+	@(cd $(DOCDIR) ; $(MAKE) $(MFLAGS) )
+
+info dvi ps: force
+	@(cd $(DOCDIR) ; $(MAKE) $(MFLAGS) CFLAGS='$(CCFLAGS)' $@ )
+
+force:
+
+# unused
+TAGS:	$(SOURCES) $(BUILTIN_C_SRC) $(LIBRARY_SOURCE)
+	etags $(SOURCES) $(BUILTIN_C_SRC) $(LIBRARY_SOURCE)
+
+tags:	$(SOURCES) $(BUILTIN_C_SRC) $(LIBRARY_SOURCE)
+	ctags -x $(SOURCES) $(BUILTIN_C_SRC) $(LIBRARY_SOURCE) > $@
+
+# Targets that actually do things not part of the build
+
+installdirs:
+	@${SHELL} $(SUPPORT_SRC)mkinstalldirs $(DESTDIR)$(bindir)
+	@${SHELL} $(SUPPORT_SRC)mkinstalldirs $(DESTDIR)$(man1dir)
+	@${SHELL} $(SUPPORT_SRC)mkinstalldirs $(DESTDIR)$(infodir)
+	@${SHELL} $(SUPPORT_SRC)mkinstalldirs $(DESTDIR)$(docdir)
+	-( cd $(PO_DIR) ; $(MAKE) $(MFLAGS) DESTDIR=$(DESTDIR) $@ )
+
+install:	.made installdirs
+	$(INSTALL_PROGRAM) $(INSTALLMODE) $(Program) $(DESTDIR)$(bindir)/$(Program)
+	$(INSTALL_SCRIPT) $(INSTALLMODE2) bashbug $(DESTDIR)$(bindir)/bashbug
+	$(INSTALL_DATA) $(OTHER_DOCS) $(DESTDIR)$(docdir)
+	-( cd $(DOCDIR) ; $(MAKE) $(MFLAGS) \
+		man1dir=$(man1dir) man1ext=$(man1ext) \
+		man3dir=$(man3dir) man3ext=$(man3ext) \
+		infodir=$(infodir) htmldir=$(htmldir) DESTDIR=$(DESTDIR) $@ )
+	-( cd $(DEFDIR) ; $(MAKE) $(MFLAGS) DESTDIR=$(DESTDIR) $@ )
+	-( cd $(PO_DIR) ; $(MAKE) $(MFLAGS) DESTDIR=$(DESTDIR) $@ )
+	-( cd $(LOADABLES_DIR) && $(MAKE) $(MFLAGS) DESTDIR=$(DESTDIR) $@ )
+
+install-strip:
+	$(MAKE) $(MFLAGS) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' \
+		prefix=${prefix} exec_prefix=${exec_prefix} \
+		DESTDIR=$(DESTDIR) install
+
+install-headers-dirs:
+	@${SHELL} $(SUPPORT_SRC)mkinstalldirs $(DESTDIR)$(headersdir)
+	@${SHELL} $(SUPPORT_SRC)mkinstalldirs $(DESTDIR)$(headersdir)/builtins
+	@${SHELL} $(SUPPORT_SRC)mkinstalldirs $(DESTDIR)$(headersdir)/include
+	@${SHELL} $(SUPPORT_SRC)mkinstalldirs $(DESTDIR)$(pkgconfigdir)
+
+install-headers: install-headers-dirs
+	@for hf in $(INSTALLED_HEADERS) ; do \
+		${INSTALL_DATA} $(srcdir)/"$$hf" $(DESTDIR)$(headersdir)/$$hf || exit 1; \
+	done
+	@for hf in $(INSTALLED_INCFILES) ; do \
+		${INSTALL_DATA} $(BASHINCDIR)/"$$hf" $(DESTDIR)$(headersdir)/include/$$hf || exit 1; \
+	done
+	@for hf in $(INSTALLED_BUILTINS_HEADERS) ; do \
+		${INSTALL_DATA} $(BUILTIN_SRCDIR)/"$$hf" $(DESTDIR)$(headersdir)/builtins/$$hf || exit 1; \
+	done
+	@for hf in $(CREATED_HEADERS) ; do \
+		if test -f $(BUILD_DIR)/"$$hf" ; then \
+			${INSTALL_DATA} $(BUILD_DIR)/"$$hf" $(DESTDIR)$(headersdir)/$$hf || exit 1; \
+		else \
+			${INSTALL_DATA} $(srcdir)/"$$hf" $(DESTDIR)$(headersdir)/$$hf || exit 1; \
+		fi ; \
+	done
+	-$(INSTALL_DATA) $(SDIR)/bash.pc $(DESTDIR)$(pkgconfigdir)/bash.pc
+
+uninstall-headers:
+	-( cd $(DESTDIR)$(headersdir) && $(RM) $(INSTALLED_HEADERS) )
+	-( cd $(DESTDIR)$(headersdir)/include && $(RM) $(INSTALLED_INCFILES) )
+	-( cd $(DESTDIR)$(headersdir)/builtins && $(RM) $(INSTALLED_BUILTINS_HEADERS) )
+	-( cd $(DESTDIR)$(headersdir) && $(RM) $(CREATED_HEADERS) )
+	-( $(RM) $(DESTDIR)$(pkgconfigdir)/bash.pc )
+
+uninstall:	.made
+	$(RM) $(DESTDIR)$(bindir)/$(Program) $(DESTDIR)$(bindir)/bashbug
+	-( cd $(DESTDIR)$(docdir) && ${RM} ${OTHER_INSTALLED_DOCS} )
+	-( cd $(DOCDIR) ; $(MAKE) $(MFLAGS) \
+		man1dir=$(man1dir) man1ext=$(man1ext) \
+		man3dir=$(man3dir) man3ext=$(man3ext) \
+		infodir=$(infodir) htmldir=$(htmldir) DESTDIR=$(DESTDIR) $@ )
+	-( cd $(PO_DIR) ; $(MAKE) $(MFLAGS) DESTDIR=$(DESTDIR) $@ )
+	-( cd $(LOADABLES_DIR) && $(MAKE) $(MFLAGS) DESTDIR=$(DESTDIR) $@ )
+
+.PHONY: basic-clean clean realclean maintainer-clean distclean mostlyclean maybe-clean
+
+LIB_SUBDIRS = ${RL_LIBDIR}  ${HIST_LIBDIR} ${TERM_LIBDIR} ${GLOB_LIBDIR} \
+		${INTL_LIBDIR} ${TILDE_LIBDIR} ${ALLOC_LIBDIR} ${SH_LIBDIR}
+
+basic-clean:
+	$(RM) $(OBJECTS) $(Program) bashbug
+	$(RM) .build .made version.h 
+
+clean:	basic-clean
+	( cd $(DOCDIR) && $(MAKE) $(MFLAGS) $@ )
+	( cd builtins && $(MAKE) $(MFLAGS) $@ )
+	-( cd $(SDIR) && $(MAKE) $(MFLAGS) $@ )
+	-for libdir in ${LIB_SUBDIRS}; do \
+		(cd $$libdir && test -f Makefile && $(MAKE) $(MFLAGS) $@) ;\
+	done
+	-( cd $(PO_DIR) ; $(MAKE) $(MFLAGS) DESTDIR=$(DESTDIR) $@ )
+	-( cd $(LOADABLES_DIR) && $(MAKE) $(MFLAGS) DESTDIR=$(DESTDIR) $@ )
+	$(RM) $(CREATED_SUPPORT)
+
+mostlyclean: basic-clean
+	( cd $(DOCDIR) && $(MAKE) $(MFLAGS) $@ )
+	( cd builtins && $(MAKE) $(MFLAGS) $@ )
+	-( cd $(SDIR) && $(MAKE) $(MFLAGS) $@ )
+	-for libdir in ${LIB_SUBDIRS}; do \
+		(cd $$libdir && test -f Makefile && $(MAKE) $(MFLAGS) $@) ;\
+	done
+	-( cd $(PO_DIR) ; $(MAKE) $(MFLAGS) DESTDIR=$(DESTDIR) $@ )
+	-( cd $(LOADABLES_DIR) && $(MAKE) $(MFLAGS) DESTDIR=$(DESTDIR) $@ )
+
+distclean:	basic-clean maybe-clean
+	( cd $(DOCDIR) && $(MAKE) $(MFLAGS) $@ )
+	( cd builtins && $(MAKE) $(MFLAGS) $@ )
+	-( cd $(SDIR) && $(MAKE) $(MFLAGS) $@ )
+	-for libdir in ${LIB_SUBDIRS}; do \
+		(cd $$libdir && test -f Makefile && $(MAKE) $(MFLAGS) $@) ;\
+	done
+	-( cd $(PO_DIR) ; $(MAKE) $(MFLAGS) DESTDIR=$(DESTDIR) $@ )
+	-( cd $(LOADABLES_DIR) && $(MAKE) $(MFLAGS) DESTDIR=$(DESTDIR) $@ )
+	$(RM) $(CREATED_CONFIGURE) tags TAGS 
+	$(RM) $(CREATED_SUPPORT) Makefile $(CREATED_MAKEFILES) pathnames.h
+
+maintainer-clean:	basic-clean
+	@echo This command is intended for maintainers to use.
+	@echo It deletes files that may require special tools to rebuild.
+	$(RM) y.tab.c y.tab.h parser-built tags TAGS
+	( cd $(DOCDIR) && $(MAKE) $(MFLAGS) $@ )
+	( cd builtins && $(MAKE) $(MFLAGS) $@ )
+	( cd $(SDIR) && $(MAKE) $(MFLAGS) $@ )
+	-for libdir in ${LIB_SUBDIRS}; do \
+		(cd $$libdir && test -f Makefile && $(MAKE) $(MFLAGS) $@) ;\
+	done
+	-( cd $(PO_DIR) ; $(MAKE) $(MFLAGS) DESTDIR=$(DESTDIR) $@ )
+	-( cd $(LOADABLES_DIR) && $(MAKE) $(MFLAGS) DESTDIR=$(DESTDIR) $@ )
+	$(RM) $(CREATED_CONFIGURE) $(CREATED_MAKEFILES)
+	$(RM) $(CREATED_SUPPORT) Makefile pathnames.h
+
+maybe-clean:
+	-if test X"`cd $(topdir) && pwd -P`" != X"`cd $(BUILD_DIR) && pwd -P`" ; then \
+		$(RM) parser-built y.tab.c y.tab.h ; \
+	fi
+
+recho$(EXEEXT):		$(SUPPORT_SRC)recho.c
+	@$(CC_FOR_BUILD) $(CCFLAGS_FOR_BUILD) ${LDFLAGS_FOR_BUILD} -o $@ $(SUPPORT_SRC)recho.c ${LIBS_FOR_BUILD}
+
+zecho$(EXEEXT):		$(SUPPORT_SRC)zecho.c
+	@$(CC_FOR_BUILD) $(CCFLAGS_FOR_BUILD) ${LDFLAGS_FOR_BUILD} -o $@ $(SUPPORT_SRC)zecho.c ${LIBS_FOR_BUILD}
+
+printenv$(EXEEXT):	$(SUPPORT_SRC)printenv.c
+	@$(CC_FOR_BUILD) $(CCFLAGS_FOR_BUILD) ${LDFLAGS_FOR_BUILD} -o $@ $(SUPPORT_SRC)printenv.c ${LIBS_FOR_BUILD}
+
+xcase$(EXEEXT):	$(SUPPORT_SRC)xcase.c
+	@$(CC_FOR_BUILD) $(CCFLAGS_FOR_BUILD) ${LDFLAGS_FOR_BUILD} -o $@ $(SUPPORT_SRC)xcase.c ${LIBS_FOR_BUILD}
+
+test tests check:	force $(Program) $(TESTS_SUPPORT)
+	@-test -d tests || mkdir tests
+	@cp $(TESTS_SUPPORT) tests
+	@( cd $(srcdir)/tests && \
+		BUILD_DIR=$(BUILD_DIR) PATH=$(BUILD_DIR)/tests:$$PATH THIS_SH=$(THIS_SH) $(SHELL) ${TESTSCRIPT} )
+
+symlinks:
+	$(SHELL) $(SUPPORT_SRC)fixlinks -s $(srcdir)
+
+dist:	force
+	@echo Bash distributions are created using $(srcdir)/support/mkdist.
+	@echo Here is a sample of the necessary commands:
+	@echo $(Program) $(srcdir)/support/mkdist -m $(srcdir)/MANIFEST -s $(srcdir) -r ${PACKAGE} -t $(PACKAGE_VERSION)
+
+xdist:	force
+	( cd $(DOCDIR) && $(MAKE) $(MFLAGS) $@ )
+	( cd po && $(MAKE) $(MFLAGS) $@ )
+
+depend:	depends
+
+depends: force
+	$(Program) $(SUPPORT_SRC)mkdep -c ${CC} -- ${CCFLAGS} ${CSOURCES}
+
+#### PRIVATE TARGETS ####
+hashtest:	hashlib.c
+	$(CC) -DTEST_HASHING $(CCFLAGS) $(TEST_NBUCKETS) -o $@ $(srcdir)/hashlib.c xmalloc.o $(INTL_LIB) $(MALLOC_LIBRARY)
+
+############################ DEPENDENCIES ###############################
+
+# Files that depend on the definitions in config-top.h, which are not meant
+# to be changed
+array.o: $(srcdir)/config-top.h
+bashhist.o: $(srcdir)/config-top.h
+shell.o: $(srcdir)/config-top.h
+input.o: $(srcdir)/config-top.h
+y.tab.o: $(srcdir)/config-top.h
+jobs.o: $(srcdir)/config-top.h
+nojobs.o: $(srcdir)/config-top.h
+execute_cmd.o: $(srcdir)/config-top.h
+variables.o: $(srcdir)/config-top.h
+findcmd.o: $(srcdir)/config-top.h
+subst.o: $(srcdir)/config-top.h
+builtins/cd.o: $(srcdir)/config-top.h
+builtins/command.o: $(srcdir)/config-top.h
+builtins/common.o: $(srcdir)/config-top.h
+builtins/declare.o: $(srcdir)/config-top.h
+builtins/break.o: $(srcdir)/config-top.h
+builtins/echo.o: $(srcdir)/config-top.h
+builtins/evalstring.o: $(srcdir)/config-top.h
+builtins/exit.o: $(srcdir)/config-top.h
+builtins/kill.o: $(srcdir)/config-top.h
+builtins/shopt.o: $(srcdir)/config-top.h
+
+# XXX
+${SH_LIBDIR}/tmpfile.o: $(srcdir)/config-top.h
+
+# shell basics
+copy_cmd.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+copy_cmd.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashlib.h
+copy_cmd.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+copy_cmd.o: make_cmd.h subst.h sig.h pathnames.h externs.h
+copy_cmd.o: bashansi.h assoc.h $(BASHINCDIR)/ocache.h $(BASHINCDIR)/chartypes.h
+dispose_cmd.o: bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+dispose_cmd.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h
+dispose_cmd.o: error.h general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashlib.h
+dispose_cmd.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+dispose_cmd.o: make_cmd.h subst.h sig.h pathnames.h externs.h
+dispose_cmd.o: ${BASHINCDIR}/ocache.h
+dispose_cmd.o: assoc.h ${BASHINCDIR}/chartypes.h
+error.o: config.h bashtypes.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h flags.h ${BASHINCDIR}/stdc.h error.h
+error.o: command.h general.h xmalloc.h externs.h input.h bashhist.h
+error.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+error.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashlib.h
+error.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+error.o: make_cmd.h subst.h sig.h pathnames.h externs.h execute_cmd.h
+error.o: input.h execute_cmd.h 
+error.o: $(BASHINCDIR)/ocache.h $(BASHINCDIR)/chartypes.h assoc.h
+eval.o: config.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h trap.h flags.h ${DEFSRC}/common.h
+eval.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+eval.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashlib.h
+eval.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+eval.o: make_cmd.h subst.h sig.h pathnames.h externs.h parser.h
+eval.o: input.h execute_cmd.h 
+eval.o: bashhist.h assoc.h ${BASHINCDIR}/ocache.h ${BASHINCDIR}/chartypes.h
+execute_cmd.o: config.h bashtypes.h ${BASHINCDIR}/filecntl.h ${BASHINCDIR}/posixstat.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+execute_cmd.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+execute_cmd.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashlib.h
+execute_cmd.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+execute_cmd.o: make_cmd.h subst.h sig.h pathnames.h externs.h parser.h
+execute_cmd.o: ${BASHINCDIR}/memalloc.h ${GRAM_H} flags.h builtins.h jobs.h quit.h siglist.h
+execute_cmd.o: execute_cmd.h findcmd.h redir.h trap.h test.h pathexp.h
+execute_cmd.o: $(DEFSRC)/common.h ${DEFDIR}/builtext.h ${GLOB_LIBSRC}/strmatch.h
+execute_cmd.o: ${BASHINCDIR}/posixtime.h ${BASHINCDIR}/chartypes.h
+execute_cmd.o: $(DEFSRC)/getopt.h
+execute_cmd.o: bashhist.h input.h ${GRAM_H} assoc.h hashcmd.h alias.h
+execute_cmd.o: ${BASHINCDIR}/ocache.h ${BASHINCDIR}/posixwait.h
+expr.o: config.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h 
+expr.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+expr.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashlib.h
+expr.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+expr.o: make_cmd.h subst.h sig.h pathnames.h externs.h flags.h execute_cmd.h
+expr.o: ${BASHINCDIR}/chartypes.h
+expr.o: assoc.h ${BASHINCDIR}/ocache.h ${BASHINCDIR}/typemax.h
+findcmd.o: config.h bashtypes.h ${BASHINCDIR}/filecntl.h ${BASHINCDIR}/posixstat.h bashansi.h
+findcmd.o: ${BASHINCDIR}/ansi_stdlib.h ${BASHINCDIR}/memalloc.h shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h
+findcmd.o: ${BASHINCDIR}/stdc.h error.h general.h xmalloc.h variables.h arrayfunc.h conftypes.h quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h
+findcmd.o: dispose_cmd.h make_cmd.h subst.h sig.h pathnames.h externs.h
+findcmd.o: flags.h hashlib.h pathexp.h hashcmd.h execute_cmd.h
+findcmd.o: ${BASHINCDIR}/chartypes.h
+flags.o: config.h flags.h 
+flags.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+flags.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashlib.h
+flags.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h execute_cmd.h
+flags.o: make_cmd.h subst.h sig.h pathnames.h externs.h bashhist.h
+flags.o: ${BASHINCDIR}/ocache.h ${BASHINCDIR}/chartypes.h bashansi.h assoc.h
+general.o: config.h bashtypes.h ${BASHINCDIR}/posixstat.h ${BASHINCDIR}/filecntl.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+general.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+general.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashlib.h
+general.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+general.o: make_cmd.h subst.h sig.h pathnames.h externs.h flags.h parser.h
+general.o: pathexp.h
+general.o: ${BASHINCDIR}/maxpath.h ${BASHINCDIR}/posixtime.h
+general.o: ${BASHINCDIR}/chartypes.h
+general.o: trap.h input.h assoc.h test.h findcmd.h 
+general.o: ${BASHINCDIR}/ocache.h $(DEFSRC)/common.h
+hashcmd.o: config.h ${BASHINCDIR}/posixstat.h bashtypes.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+hashcmd.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+hashcmd.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashcmd.h
+hashcmd.o: execute_cmd.h findcmd.h ${BASHINCDIR}/stdc.h pathnames.h hashlib.h
+hashcmd.o: quit.h sig.h flags.h
+hashlib.o: config.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+hashlib.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+hashlib.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashlib.h
+hashlib.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+hashlib.o: make_cmd.h subst.h sig.h pathnames.h externs.h 
+hashlib.o: assoc.h ${BASHINCDIR}/ocache.h ${BASHINCDIR}/chartypes.h
+input.o: config.h bashtypes.h ${BASHINCDIR}/filecntl.h ${BASHINCDIR}/posixstat.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+input.o: command.h ${BASHINCDIR}/stdc.h general.h xmalloc.h input.h error.h externs.h
+input.o: quit.h shell.h pathnames.h
+list.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+list.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashlib.h
+list.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+list.o: make_cmd.h subst.h sig.h pathnames.h externs.h 
+list.o: ${BASHINCDIR}/ocache.h ${BASHINCDIR}/chartypes.h bashansi.h assoc.h
+locale.o: config.h bashtypes.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+locale.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+locale.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashlib.h
+locale.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+locale.o: make_cmd.h subst.h sig.h pathnames.h externs.h 
+locale.o: ${BASHINCDIR}/chartypes.h
+locale.o: input.h assoc.h ${BASHINCDIR}/ocache.h
+mailcheck.o: config.h bashtypes.h ${BASHINCDIR}/posixstat.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+mailcheck.o: ${BASHINCDIR}/posixtime.h
+mailcheck.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+mailcheck.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashlib.h
+mailcheck.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+mailcheck.o: make_cmd.h subst.h sig.h pathnames.h externs.h
+mailcheck.o: execute_cmd.h mailcheck.h 
+mailcheck.o: ${BASHINCDIR}/ocache.h ${BASHINCDIR}/chartypes.h assoc.h
+make_cmd.o: config.h bashtypes.h ${BASHINCDIR}/filecntl.h bashansi.h
+make_cmd.o: command.h ${BASHINCDIR}/stdc.h general.h xmalloc.h error.h flags.h make_cmd.h
+make_cmd.o: variables.h arrayfunc.h conftypes.h array.h hashlib.h subst.h input.h externs.h
+make_cmd.o: jobs.h quit.h sig.h siglist.h syntax.h dispose_cmd.h parser.h
+make_cmd.o: ${BASHINCDIR}/shmbutil.h ${BASHINCDIR}/shmbchar.h ${BASHINCDIR}/ocache.h
+make_cmd.o: shell.h execute_cmd.h pathnames.h
+make_cmd.o: $(BASHINCDIR)/maxpath.h make_cmd.c assoc.h $(BASHINCDIR)/chartypes.h
+make_cmd.o: unwind_prot.h $(BASHINCDIR)/posixjmp.h bashjmp.h $(BASHINCDIR)/posixwait.h
+y.tab.o: config.h bashtypes.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h ${BASHINCDIR}/memalloc.h
+y.tab.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+y.tab.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashlib.h
+y.tab.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+y.tab.o: make_cmd.h subst.h sig.h pathnames.h externs.h test.h execute_cmd.o
+y.tab.o: trap.h flags.h parser.h input.h mailcheck.h $(DEFSRC)/common.h
+y.tab.o: $(DEFDIR)/builtext.h bashline.h bashhist.h jobs.h siglist.h alias.h
+y.tab.o: ${BASHINCDIR}/typemax.h assoc.h ${BASHINCDIR}/ocache.h
+y.tab.o: ${BASHINCDIR}/shmbutil.h ${BASHINCDIR}/shmbchar.h ${BASHINCDIR}/posixwait.h
+pathexp.o: config.h bashtypes.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+pathexp.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+pathexp.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashlib.h
+pathexp.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+pathexp.o: make_cmd.h subst.h sig.h pathnames.h externs.h
+pathexp.o: pathexp.h flags.h 
+pathexp.o: $(GLOB_LIBSRC)/glob.h $(GLOB_LIBSRC)/strmatch.h
+pathexp.o: ${BASHINCDIR}/shmbutil.h ${BASHINCDIR}/shmbchar.h
+pathexp.o: ${BASHINCDIR}/ocache.h ${BASHINCDIR}/chartypes.h assoc.h
+print_cmd.o: config.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+print_cmd.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+print_cmd.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashlib.h
+print_cmd.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+print_cmd.o: make_cmd.h subst.h sig.h pathnames.h externs.h 
+print_cmd.o: ${BASHINCDIR}/shmbutil.h ${BASHINCDIR}/shmbchar.h
+print_cmd.o: ${GRAM_H} $(DEFSRC)/common.h
+print_cmd.o: flags.h input.h assoc.h
+print_cmd.o: $(BASHINCDIR)/ocache.h $(BASHINCDIR)/chartypes.h
+redir.o: config.h bashtypes.h ${BASHINCDIR}/posixstat.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h ${BASHINCDIR}/filecntl.h
+redir.o: ${BASHINCDIR}/memalloc.h shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+redir.o: general.h xmalloc.h variables.h arrayfunc.h conftypes.h array.h hashlib.h quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h
+redir.o: dispose_cmd.h make_cmd.h subst.h sig.h pathnames.h externs.h 
+redir.o: flags.h execute_cmd.h redir.h input.h
+redir.o: ${DEFDIR}/pipesize.h
+redir.o: trap.h assoc.h $(BASHINCDIR)/ocache.h $(BASHINCDIR)/chartypes.h
+shell.o: config.h bashtypes.h ${BASHINCDIR}/posixstat.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h ${BASHINCDIR}/filecntl.h
+shell.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+shell.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashlib.h
+shell.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+shell.o: make_cmd.h subst.h sig.h pathnames.h externs.h parser.h
+shell.o: flags.h trap.h mailcheck.h builtins.h $(DEFSRC)/common.h
+shell.o: jobs.h siglist.h input.h execute_cmd.h findcmd.h bashhist.h bashline.h
+shell.o: ${GLOB_LIBSRC}/strmatch.h ${BASHINCDIR}/posixtime.h ${BASHINCDIR}/posixwait.h
+shell.o: ${BASHINCDIR}/ocache.h ${BASHINCDIR}/chartypes.h assoc.h alias.h
+sig.o: config.h bashtypes.h
+sig.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+sig.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashlib.h
+sig.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+sig.o: make_cmd.h subst.h sig.h pathnames.h externs.h execute_cmd.h
+sig.o: jobs.h siglist.h trap.h $(DEFSRC)/common.h bashline.h bashhist.h
+sig.o: ${DEFDIR}/builtext.h
+siglist.o: config.h bashtypes.h siglist.h trap.h 
+stringlib.o: bashtypes.h ${BASHINCDIR}/chartypes.h
+stringlib.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+stringlib.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashlib.h
+stringlib.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+stringlib.o: make_cmd.h subst.h sig.h pathnames.h externs.h 
+stringlib.o: bashansi.h pathexp.h assoc.h $(BASHINCDIR)/ocache.h
+stringlib.o: ${GLOB_LIBSRC}/glob.h ${GLOB_LIBSRC}/strmatch.h
+subst.o: config.h bashtypes.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h ${BASHINCDIR}/posixstat.h
+subst.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+subst.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashlib.h
+subst.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+subst.o: make_cmd.h subst.h sig.h pathnames.h externs.h parser.h
+subst.o: flags.h jobs.h siglist.h execute_cmd.h ${BASHINCDIR}/filecntl.h trap.h pathexp.h
+subst.o: mailcheck.h input.h $(DEFSRC)/getopt.h $(DEFSRC)/common.h
+subst.o: bashline.h bashhist.h ${GLOB_LIBSRC}/strmatch.h
+subst.o: ${BASHINCDIR}/chartypes.h
+subst.o: ${BASHINCDIR}/shmbutil.h ${BASHINCDIR}/shmbchar.h
+subst.o: ${DEFDIR}/builtext.h
+test.o: bashtypes.h ${BASHINCDIR}/posixstat.h ${BASHINCDIR}/filecntl.h
+test.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+test.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashlib.h
+test.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+test.o: make_cmd.h subst.h sig.h pathnames.h externs.h test.h
+test.o: ${BASHINCDIR}/stat-time.h ${BASHINCDIR}/ocache.h ${BASHINCDIR}/chartypes.h
+test.o: $(GLOB_LIBSRC)/strmatch.h bashansi.h pathexp.h assoc.h
+test.o: ${DEFSRC}/common.h 
+trap.o: config.h bashtypes.h trap.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+trap.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+trap.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashlib.h
+trap.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h parser.h
+trap.o: make_cmd.h subst.h sig.h pathnames.h externs.h execute_cmd.h
+trap.o: signames.h $(DEFSRC)/common.h
+trap.o: ${DEFDIR}/builtext.h jobs.h
+unwind_prot.o: config.h bashtypes.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h command.h ${BASHINCDIR}/stdc.h
+unwind_prot.o: general.h xmalloc.h unwind_prot.h quit.h sig.h
+unwind_prot.o: ${BASHINCDIR}/ocache.h ${BASHINCDIR}/chartypes.h error.h
+variables.o: config.h bashtypes.h ${BASHINCDIR}/posixstat.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+variables.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+variables.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashlib.h
+variables.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+variables.o: make_cmd.h subst.h sig.h pathnames.h externs.h parser.h
+variables.o: flags.h execute_cmd.h mailcheck.h input.h $(DEFSRC)/common.h
+variables.o: findcmd.h bashhist.h hashcmd.h pathexp.h
+variables.o: pcomplete.h  ${BASHINCDIR}/chartypes.h
+variables.o: ${BASHINCDIR}/posixtime.h assoc.h ${DEFSRC}/getopt.h
+variables.o: version.h $(DEFDIR)/builtext.h
+version.o: conftypes.h patchlevel.h version.h
+xmalloc.o: config.h bashtypes.h ${BASHINCDIR}/ansi_stdlib.h error.h
+xmalloc.o: ${BASHINCDIR}/stdc.h $(ALLOC_LIBSRC)/shmalloc.h
+
+# job control
+
+jobs.o: config.h bashtypes.h trap.h ${BASHINCDIR}/filecntl.h input.h ${BASHINCDIR}/shtty.h
+jobs.o: bashansi.h ${BASHINCDIR}/ansi_stdlib.h assoc.h
+jobs.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+jobs.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashlib.h
+jobs.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h parser.h
+jobs.o: execute_cmd.h make_cmd.h subst.h sig.h pathnames.h externs.h 
+jobs.o: jobs.h flags.h $(DEFSRC)/common.h $(DEFDIR)/builtext.h
+jobs.o: ${BASHINCDIR}/posixwait.h ${BASHINCDIR}/unionwait.h
+jobs.o: ${BASHINCDIR}/posixtime.h
+jobs.o: $(BASHINCDIR)/ocache.h $(BASHINCDIR)/chartypes.h $(BASHINCDIR)/typemax.h
+nojobs.o: config.h bashtypes.h ${BASHINCDIR}/filecntl.h bashjmp.h ${BASHINCDIR}/posixjmp.h
+nojobs.o: command.h ${BASHINCDIR}/stdc.h general.h xmalloc.h jobs.h quit.h siglist.h externs.h
+nojobs.o: sig.h error.h ${BASHINCDIR}/shtty.h input.h parser.h
+nojobs.o: $(DEFDIR)/builtext.h
+nojobs.o: $(BASHINCDIR)/ocache.h $(BASHINCDIR)/chartypes.h $(BASHINCDIR)/typemax.h
+
+# shell features that may be compiled in
+
+array.o: config.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+array.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+array.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashlib.h
+array.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+array.o: make_cmd.h subst.h sig.h pathnames.h externs.h 
+array.o: $(BASHINCDIR)/ocache.h $(BASHINCDIR)/chartypes.h
+array.o: $(DEFSRC)/common.h
+arrayfunc.o: config.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+arrayfunc.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+arrayfunc.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashlib.h
+arrayfunc.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+arrayfunc.o: make_cmd.h subst.h sig.h pathnames.h externs.h pathexp.h
+arrayfunc.o: execute_cmd.h
+arrayfunc.o: assoc.h $(BASHINCDIR)/ocache.h $(BASHINCDIR)/chartypes.h
+arrayfunc.o: $(DEFSRC)/common.h
+arrayfunc.o: ${BASHINCDIR}/shmbutil.h ${BASHINCDIR}/shmbchar.h
+assoc.o: config.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+assoc.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h
+assoc.o: command.h ${BASHINCDIR}/stdc.h error.h
+assoc.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h
+assoc.o: assoc.h hashlib.h
+assoc.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+assoc.o: make_cmd.h subst.h sig.h pathnames.h externs.h 
+assoc.o: array.h ${BASHINCDIR}/ocache.h ${BASHINCDIR}/chartypes.h
+assoc.o: $(DEFSRC)/common.h
+braces.o: config.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+braces.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+braces.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashlib.h
+braces.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+braces.o: make_cmd.h subst.h sig.h pathnames.h externs.h 
+braces.o: ${BASHINCDIR}/shmbutil.h ${BASHINCDIR}/shmbchar.h
+braces.o: ${BASHINCDIR}/typemax.h ${BASHINCDIR}/ocache.h ${BASHINCDIR}/chartypes.h 
+alias.o: config.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h command.h ${BASHINCDIR}/stdc.h
+alias.o: general.h xmalloc.h bashtypes.h externs.h alias.h
+alias.o: pcomplete.h hashlib.h
+alias.o: ${BASHINCDIR}/chartypes.h
+
+pcomplib.o: config.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h bashtypes.h
+pcomplib.o: ${BASHINCDIR}/stdc.h hashlib.h pcomplete.h shell.h syntax.h
+pcomplib.o: bashjmp.h command.h general.h xmalloc.h error.h variables.h arrayfunc.h conftypes.h quit.h
+pcomplib.o: unwind_prot.h dispose_cmd.h make_cmd.h subst.h sig.h pathnames.h
+pcomplib.o: externs.h ${BASHINCDIR}/maxpath.h assoc.h array.h
+pcomplib.o: ${BASHINCDIR}/posixjmp.h ${BASHINCDIR}/ocache.h ${BASHINCDIR}/chartypes.h
+
+pcomplete.o: config.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h bashtypes.h
+pcomplete.o: ${BASHINCDIR}/stdc.h hashlib.h pcomplete.h shell.h syntax.h
+pcomplete.o: bashjmp.h command.h general.h xmalloc.h error.h variables.h arrayfunc.h conftypes.h quit.h
+pcomplete.o: unwind_prot.h dispose_cmd.h make_cmd.h subst.h sig.h pathnames.h
+pcomplete.o: externs.h ${BASHINCDIR}/maxpath.h execute_cmd.h 
+pcomplete.o: ${BASHINCDIR}/shmbutil.h ${BASHINCDIR}/shmbchar.h
+pcomplete.o: ${DEFDIR}/builtext.h
+
+# library support files
+
+bashhist.o: config.h bashtypes.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h ${BASHINCDIR}/posixstat.h
+bashhist.o: ${BASHINCDIR}/filecntl.h
+bashhist.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+bashhist.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashlib.h
+bashhist.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+bashhist.o: make_cmd.h subst.h sig.h pathnames.h externs.h parser.h
+bashhist.o: flags.h input.h parser.h pathexp.h $(DEFSRC)/common.h bashline.h
+bashhist.o: ${BASHINCDIR}/ocache.h ${BASHINCDIR}/chartypes.h bashhist.h assoc.h
+bashhist.o: $(GLOB_LIBSRC)/strmatch.h ${GLOB_LIBSRC}/glob.h
+bashline.o: config.h bashtypes.h ${BASHINCDIR}/posixstat.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+bashline.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h command.h ${BASHINCDIR}/stdc.h error.h
+bashline.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h array.h hashlib.h
+bashline.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+bashline.o: make_cmd.h subst.h sig.h pathnames.h externs.h parser.h
+bashline.o: builtins.h bashhist.h bashline.h execute_cmd.h findcmd.h pathexp.h
+bashline.o: trap.h flags.h assoc.h $(BASHINCDIR)/ocache.h
+bashline.o: $(DEFSRC)/common.h $(GLOB_LIBSRC)/glob.h alias.h
+bashline.o: pcomplete.h ${BASHINCDIR}/chartypes.h input.h
+bashline.o: ${BASHINCDIR}/shmbutil.h ${BASHINCDIR}/shmbchar.h
+bracecomp.o: config.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+bracecomp.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h
+bracecomp.o: command.h ${BASHINCDIR}/stdc.h error.h
+bracecomp.o: general.h xmalloc.h bashtypes.h variables.h arrayfunc.h conftypes.h
+bracecomp.o: array.h hashlib.h alias.h builtins.h 
+bracecomp.o: quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+bracecomp.o: make_cmd.h subst.h sig.h pathnames.h externs.h 
+bracecomp.o: ${BASHINCDIR}/ocache.h ${BASHINCDIR}/chartypes.h bashhist.h assoc.h
+bracecomp.o: ${BASHINCDIR}/shmbutil.h ${BASHINCDIR}/shmbchar.h
+
+# library dependencies
+
+bashhist.o: $(RL_LIBSRC)/rltypedefs.h
+bashline.o: $(RL_LIBSRC)/rlconf.h
+bashline.o: $(RL_LIBSRC)/keymaps.h $(RL_LIBSRC)/rlstdc.h
+bashline.o: $(RL_LIBSRC)/chardefs.h $(RL_LIBSRC)/readline.h
+bashline.o: $(RL_LIBSRC)/rltypedefs.h ${RL_LIBSRC}/rlmbutil.h
+bracecomp.o: $(RL_LIBSRC)/keymaps.h $(RL_LIBSRC)/chardefs.h
+bracecomp.o: $(RL_LIBSRC)/readline.h $(RL_LIBSRC)/rlstdc.h
+bracecomp.o: $(RL_LIBSRC)/rltypedefs.h
+y.tab.o: $(RL_LIBSRC)/keymaps.h $(RL_LIBSRC)/chardefs.h
+y.tab.o: $(RL_LIBSRC)/readline.h $(RL_LIBSRC)/rlstdc.h
+y.tab.o: $(RL_LIBSRC)/rltypedefs.h
+subst.o: $(RL_LIBSRC)/keymaps.h $(RL_LIBSRC)/chardefs.h
+subst.o: $(RL_LIBSRC)/readline.h $(RL_LIBSRC)/rlstdc.h
+shell.o: $(RL_LIBSRC)/keymaps.h $(RL_LIBSRC)/chardefs.h
+shell.o: $(RL_LIBSRC)/readline.h $(RL_LIBSRC)/rlstdc.h
+shell.o: $(RL_LIBSRC)/rltypedefs.h
+variables.o: $(RL_LIBSRC)/keymaps.h $(RL_LIBSRC)/chardefs.h
+variables.o: $(RL_LIBSRC)/readline.h $(RL_LIBSRC)/rlstdc.h
+variables.o: $(RL_LIBSRC)/rltypedefs.h
+jobs.o: $(RL_LIBSRC)/keymaps.h $(RL_LIBSRC)/chardefs.h
+jobs.o: $(RL_LIBSRC)/readline.h $(RL_LIBSRC)/rlstdc.h
+jobs.o: $(RL_LIBSRC)/rltypedefs.h
+
+shell.o: $(HIST_LIBSRC)/history.h $(HIST_LIBSRC)/rlstdc.h
+variables.o: $(HIST_LIBSRC)/history.h $(HIST_LIBSRC)/rlstdc.h
+subst.o: $(HIST_LIBSRC)/history.h $(HIST_LIBSRC)/rlstdc.h
+bashline.o: $(HIST_LIBSRC)/history.h $(HIST_LIBSRC)/rlstdc.h
+bashhist.o: $(HIST_LIBSRC)/history.h $(HIST_LIBSRC)/rlstdc.h
+y.tab.o: $(HIST_LIBSRC)/history.h $(HIST_LIBSRC)/rlstdc.h
+
+bashline.o: $(TILDE_LIBSRC)/tilde.h
+bracecomp.o: $(TILDE_LIBSRC)/tilde.h
+execute_cmd.o: $(TILDE_LIBSRC)/tilde.h
+general.o: $(TILDE_LIBSRC)/tilde.h
+mailcheck.o: $(TILDE_LIBSRC)/tilde.h
+shell.o: $(TILDE_LIBSRC)/tilde.h
+subst.o: $(TILDE_LIBSRC)/tilde.h
+variables.o: $(TILDE_LIBSRC)/tilde.h
+jobs.o: $(TILDE_LIBSRC)/tilde.h
+y.tab.o: $(TILDE_LIBSRC)/tilde.h
+
+# libintl dependencies
+arrayfunc.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+bashhist.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+bashline.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+braces.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+error.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+eval.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+execute_cmd.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+expr.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+general.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+input.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+jobs.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+locale.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+mailcheck.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+make_cmd.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+nojobs.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+y.tab.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+pathexp.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+pcomplete.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+pcomplib.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+print_cmd.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+redir.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+shell.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+sig.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+siglist.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+subst.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+test.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+trap.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+variables.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+version.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+xmalloc.o: bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+
+# XXX
+$(MALLOC_SOURCE): bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+
+signames.o: config.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+
+# XXX - dependencies checked through here
+
+# builtin c sources
+builtins/bashgetopt.o: config.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+builtins/bashgetopt.o: shell.h syntax.h config.h bashjmp.h command.h general.h xmalloc.h error.h
+builtins/bashgetopt.o: variables.h arrayfunc.h conftypes.h quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+builtins/bashgetopt.o: make_cmd.h subst.h sig.h pathnames.h externs.h 
+builtins/bashgetopt.o: $(DEFSRC)/common.h
+builtins/bashgetopt.o: ${BASHINCDIR}/chartypes.h
+builtins/common.o: bashtypes.h ${BASHINCDIR}/posixstat.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+builtins/common.o: shell.h syntax.h config.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h command.h
+builtins/common.o: ${BASHINCDIR}/memalloc.h variables.h arrayfunc.h conftypes.h input.h siglist.h
+builtins/common.o: quit.h unwind_prot.h ${BASHINCDIR}/maxpath.h jobs.h builtins.h
+builtins/common.o: dispose_cmd.h make_cmd.h subst.h externs.h bashhist.h 
+builtins/common.o: execute_cmd.h ${BASHINCDIR}/stdc.h general.h xmalloc.h error.h pathnames.h
+builtins/common.o: ${DEFDIR}/builtext.h parser.h
+builtins/common.o: ${BASHINCDIR}/chartypes.h
+builtins/evalfile.o: bashtypes.h ${BASHINCDIR}/posixstat.h ${BASHINCDIR}/filecntl.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+builtins/evalfile.o: shell.h syntax.h config.h bashjmp.h command.h general.h xmalloc.h error.h
+builtins/evalfile.o: variables.h arrayfunc.h conftypes.h quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+builtins/evalfile.o: make_cmd.h subst.h sig.h pathnames.h externs.h parser.h
+builtins/evalfile.o: jobs.h builtins.h flags.h input.h execute_cmd.h
+builtins/evalfile.o: bashhist.h $(DEFSRC)/common.h
+builtins/evalstring.o: config.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+builtins/evalstring.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h command.h siglist.h
+builtins/evalstring.o: ${BASHINCDIR}/memalloc.h variables.h arrayfunc.h conftypes.h input.h
+builtins/evalstring.o: quit.h unwind_prot.h ${BASHINCDIR}/maxpath.h jobs.h builtins.h
+builtins/evalstring.o: dispose_cmd.h make_cmd.h subst.h externs.h 
+builtins/evalstring.o: jobs.h builtins.h flags.h input.h execute_cmd.h
+builtins/evalstring.o: bashhist.h $(DEFSRC)/common.h pathnames.h
+builtins/getopt.o: config.h ${BASHINCDIR}/memalloc.h
+builtins/getopt.o: shell.h syntax.h bashjmp.h command.h general.h xmalloc.h error.h
+builtins/getopt.o: variables.h arrayfunc.h conftypes.h quit.h ${BASHINCDIR}/maxpath.h unwind_prot.h dispose_cmd.h
+builtins/getopt.o: make_cmd.h subst.h sig.h pathnames.h externs.h 
+builtins/getopt.o: $(DEFSRC)/getopt.h
+builtins/mkbuiltins.o: config.h bashtypes.h ${BASHINCDIR}/posixstat.h ${BASHINCDIR}/filecntl.h
+builtins/mkbuiltins.o: bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+builtins/mkbuiltins.o: $(BASHINCDIR)/stdc.h
+
+# builtin def files
+builtins/alias.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/alias.o: quit.h $(DEFSRC)/common.h pathnames.h
+builtins/alias.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h command.h ${BASHINCDIR}/stdc.h unwind_prot.h
+builtins/alias.o: dispose_cmd.h make_cmd.h subst.h externs.h variables.h arrayfunc.h conftypes.h 
+builtins/bind.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/bind.o: dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/bind.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h quit.h
+builtins/bind.o: $(DEFSRC)/bashgetopt.h pathnames.h
+builtins/break.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/break.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h quit.h
+builtins/break.o: dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/break.o: pathnames.h execute_cmd.h
+builtins/builtin.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/builtin.o: quit.h $(DEFSRC)/common.h $(DEFSRC)/bashgetopt.h
+builtins/builtin.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h 
+builtins/builtin.o: dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/builtin.o: pathnames.h execute_cmd.h
+builtins/caller.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/caller.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h
+builtins/caller.o: dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/caller.o: $(DEFSRC)/common.h quit.h 
+builtins/caller.o: ${BASHINCDIR}/chartypes.h bashtypes.h
+builtins/caller.o: ${DEFDIR}/builtext.h pathnames.h
+builtins/cd.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/cd.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h
+builtins/cd.o: dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/cd.o: $(DEFSRC)/common.h quit.h pathnames.h
+builtins/colon.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/colon.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h quit.h
+builtins/colon.o: dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/colon.o: pathnames.h
+builtins/command.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/command.o: quit.h $(DEFSRC)/bashgetopt.h
+builtins/command.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h 
+builtins/command.o: dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h pathnames.h
+builtins/declare.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/declare.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h quit.h
+builtins/declare.o: dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/declare.o: $(DEFSRC)/bashgetopt.h pathnames.h flags.h
+builtins/echo.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/echo.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h quit.h
+builtins/echo.o: dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/echo.o: pathnames.h
+builtins/echo.o: $(DEFSRC)/common.h
+builtins/enable.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/enable.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h quit.h
+builtins/enable.o: dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/enable.o: pcomplete.h pathnames.h
+builtins/eval.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/eval.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h quit.h 
+builtins/eval.o: dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/eval.o: pathnames.h
+builtins/exec.o: bashtypes.h pathnames.h
+builtins/exec.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/exec.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h
+builtins/exec.o: dispose_cmd.h make_cmd.h subst.h externs.h execute_cmd.h 
+builtins/exec.o: findcmd.h flags.h quit.h $(DEFSRC)/common.h ${BASHINCDIR}/stdc.h
+builtins/exec.o: pathnames.h
+builtins/exit.o: bashtypes.h 
+builtins/exit.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/exit.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h quit.h
+builtins/exit.o: dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/exit.o: pathnames.h execute_cmd.h
+builtins/fc.o: bashtypes.h ${BASHINCDIR}/posixstat.h
+builtins/fc.o: bashansi.h ${BASHINCDIR}/ansi_stdlib.h builtins.h command.h ${BASHINCDIR}/stdc.h 
+builtins/fc.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/fc.o: flags.h unwind_prot.h variables.h arrayfunc.h conftypes.h shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h 
+builtins/fc.o: dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h quit.h 
+builtins/fc.o: $(DEFSRC)/bashgetopt.h bashhist.h pathnames.h parser.h
+builtins/fc.o: ${BASHINCDIR}/chartypes.h
+builtins/fg_bg.o: bashtypes.h $(DEFSRC)/bashgetopt.h 
+builtins/fg_bg.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/fg_bg.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h quit.h
+builtins/fg_bg.o: dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/fg_bg.o: pathnames.h execute_cmd.h
+builtins/getopts.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/getopts.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h quit.h 
+builtins/getopts.o: dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/getopts.o: pathnames.h execute_cmd.h
+builtins/hash.o: bashtypes.h execute_cmd.h
+builtins/hash.o: builtins.h command.h findcmd.h ${BASHINCDIR}/stdc.h $(DEFSRC)/common.h
+builtins/hash.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/hash.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h quit.h 
+builtins/hash.o: pathnames.h
+builtins/help.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/help.o: dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/help.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h
+builtins/help.o: conftypes.h quit.h execute_cmd.h
+builtins/help.o: $(GLOB_LIBSRC)/glob.h pathnames.h
+builtins/history.o: bashtypes.h pathnames.h parser.h
+builtins/history.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/history.o: quit.h dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/history.o: ${BASHINCDIR}/filecntl.h shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h
+builtins/history.o: bashhist.h variables.h arrayfunc.h conftypes.h 
+builtins/inlib.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/inlib.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h quit.h 
+builtins/inlib.o: dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/inlib.o: pathnames.h
+builtins/jobs.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/jobs.o: quit.h $(DEFSRC)/bashgetopt.h
+builtins/jobs.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h 
+builtins/jobs.o: dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/jobs.o: pathnames.h
+builtins/kill.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/kill.o: quit.h dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/kill.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h trap.h unwind_prot.h variables.h arrayfunc.h conftypes.h 
+builtins/kill.o: pathnames.h
+builtins/let.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/let.o: quit.h dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/let.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h 
+builtins/let.o: pathnames.h
+builtins/printf.o: config.h ${BASHINCDIR}/memalloc.h bashjmp.h command.h error.h
+builtins/printf.o: general.h xmalloc.h quit.h dispose_cmd.h make_cmd.h subst.h
+builtins/printf.o: externs.h sig.h pathnames.h shell.h syntax.h unwind_prot.h
+builtins/printf.o: variables.h arrayfunc.h conftypes.h ${BASHINCDIR}/stdc.h $(DEFSRC)/bashgetopt.h
+builtins/printf.o: ${BASHINCDIR}/shmbutil.h ${BASHINCDIR}/shmbchar.h
+builtins/printf.o: ${BASHINCDIR}/chartypes.h 
+builtins/pushd.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/pushd.o: quit.h dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/pushd.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h
+builtins/pushd.o: $(DEFSRC)/common.h pathnames.h
+builtins/read.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/read.o: quit.h dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/read.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h 
+builtins/read.o: ${BASHINCDIR}/shmbutil.h ${BASHINCDIR}/shmbchar.h
+builtins/read.o: pathnames.h
+builtins/return.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/return.o: quit.h dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/return.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h 
+builtins/return.o: pathnames.h execute_cmd.h
+builtins/set.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/set.o: quit.h dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/set.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h flags.h
+builtins/set.o: pathnames.h parser.h
+builtins/setattr.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/setattr.o: quit.h $(DEFSRC)/common.h $(DEFSRC)/bashgetopt.h
+builtins/setattr.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h 
+builtins/setattr.o: dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/setattr.o: pathnames.h flags.h execute_cmd.h
+builtins/shift.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/shift.o: quit.h dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/shift.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h 
+builtins/shift.o: dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/shift.o: pathnames.h
+builtins/shopt.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h
+builtins/shopt.o: quit.h dispose_cmd.h make_cmd.h subst.h externs.h
+builtins/shopt.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h unwind_prot.h variables.h arrayfunc.h conftypes.h ${BASHINCDIR}/maxpath.h
+builtins/shopt.o: $(DEFSRC)/common.h $(DEFSRC)/bashgetopt.h pathnames.h
+builtins/shopt.o: bashhist.h bashline.h
+builtins/source.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/source.o: quit.h dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/source.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h
+builtins/source.o: findcmd.h $(DEFSRC)/bashgetopt.h flags.h trap.h
+builtins/source.o: pathnames.h execute_cmd.h
+builtins/suspend.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/suspend.o: quit.h dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/suspend.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h 
+builtins/suspend.o: pathnames.h
+builtins/test.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/test.o: quit.h dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/test.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h 
+builtins/test.o: execute_cmd.h test.h pathnames.h
+builtins/times.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/times.o: quit.h dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/times.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h 
+builtins/times.o: pathnames.h
+builtins/trap.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/trap.o: quit.h $(DEFSRC)/common.h
+builtins/trap.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h 
+builtins/trap.o: dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/trap.o: pathnames.h
+builtins/type.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/type.o: quit.h $(DEFSRC)/common.h findcmd.h
+builtins/type.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h
+builtins/type.o: dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/type.o: pathnames.h execute_cmd.h parser.h
+builtins/ulimit.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/ulimit.o: quit.h dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/ulimit.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h 
+builtins/ulimit.o: pathnames.h
+builtins/umask.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/umask.o: quit.h dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/umask.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h 
+builtins/umask.o: ${BASHINCDIR}/chartypes.h pathnames.h
+builtins/wait.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/wait.o: quit.h dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/wait.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h
+builtins/wait.o: execute_cmd.h
+builtins/wait.o: ${BASHINCDIR}/chartypes.h pathnames.h
+
+builtins/complete.o: config.h shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h
+builtins/complete.o: unwind_prot.h variables.h arrayfunc.h conftypes.h
+builtins/complete.o: bashtypes.h bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+builtins/complete.o: builtins.h pathnames.h general.h
+builtins/complete.o: bashtypes.h ${BASHINCDIR}/chartypes.h xmalloc.h
+builtins/complete.o: pcomplete.h
+builtins/complete.o: ${DEFSRC}/common.h ${DEFSRC}/bashgetopt.h
+builtins/mapfile.o: command.h config.h ${BASHINCDIR}/memalloc.h error.h general.h xmalloc.h ${BASHINCDIR}/maxpath.h
+builtins/mapfile.o: quit.h dispose_cmd.h make_cmd.h subst.h externs.h ${BASHINCDIR}/stdc.h
+builtins/mapfile.o: shell.h syntax.h bashjmp.h ${BASHINCDIR}/posixjmp.h sig.h unwind_prot.h variables.h arrayfunc.h conftypes.h 
+builtins/mapfile.o: pathnames.h
+
+# libintl dependencies
+builtins/bind.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/break.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/caller.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/cd.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/common.c: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/complete.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/declare.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/enable.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/evalfile.c: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/exec.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/exit.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/fc.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/fg_bg.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/getopt.c: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/hash.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/help.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/history.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/inlib.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/jobs.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/kill.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/let.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/mapfile.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/mkbuiltins.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/printf.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/pushd.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/read.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/return.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/set.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/setattr.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/shift.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/shopt.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/source.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/suspend.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/type.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/ulimit.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+builtins/umask.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+
+# builtin library dependencies
+builtins/bind.o: $(RL_LIBSRC)/chardefs.h $(RL_LIBSRC)/readline.h
+builtins/bind.o: $(RL_LIBSRC)/keymaps.h $(RL_LIBSRC)/rlstdc.h
+
+builtins/bind.o: $(HIST_LIBSRC)/history.h $(RL_LIBSRC)/rlstdc.h
+builtins/fc.o: $(HIST_LIBSRC)/history.h $(RL_LIBSRC)/rlstdc.h
+builtins/history.o: $(HIST_LIBSRC)/history.h $(RL_LIBSRC)/rlstdc.h
+
+builtins/common.o: $(TILDE_LIBSRC)/tilde.h
+builtins/cd.o: $(TILDE_LIBSRC)/tilde.h 
+
+builtins/alias.o: $(DEFSRC)/alias.def
+builtins/bind.o: $(DEFSRC)/bind.def
+builtins/break.o: $(DEFSRC)/break.def
+builtins/builtin.o: $(DEFSRC)/builtin.def
+builtins/caller.o: $(DEFSRC)/caller.def
+builtins/cd.o: $(DEFSRC)/cd.def
+builtins/colon.o: $(DEFSRC)/colon.def
+builtins/command.o: $(DEFSRC)/command.def
+builtins/complete.o: $(DEFSRC)/complete.def
+builtins/declare.o: $(DEFSRC)/declare.def
+builtins/echo.o: $(DEFSRC)/echo.def
+builtins/enable.o: $(DEFSRC)/enable.def
+builtins/eval.o: $(DEFSRC)/eval.def
+builtins/exec.o: $(DEFSRC)/exec.def
+builtins/exit.o: $(DEFSRC)/exit.def
+builtins/fc.o: $(DEFSRC)/fc.def
+builtins/fg_bg.o: $(DEFSRC)/fg_bg.def
+builtins/getopts.o: $(DEFSRC)/getopts.def
+builtins/hash.o: $(DEFSRC)/hash.def
+builtins/help.o: $(DEFSRC)/help.def
+builtins/history.o: $(DEFSRC)/history.def
+builtins/inlib.o: $(DEFSRC)/inlib.def
+builtins/jobs.o: $(DEFSRC)/jobs.def
+builtins/kill.o: $(DEFSRC)/kill.def
+builtins/let.o: $(DEFSRC)/let.def
+builtins/mapfile.o: $(DEFSRC)/mapfile.def
+builtins/pushd.o: $(DEFSRC)/pushd.def
+builtins/read.o: $(DEFSRC)/read.def
+builtins/reserved.o: $(DEFSRC)/reserved.def
+builtins/return.o: $(DEFSRC)/return.def
+builtins/set.o: $(DEFSRC)/set.def
+builtins/setattr.o: $(DEFSRC)/setattr.def
+builtins/shift.o: $(DEFSRC)/shift.def
+builtins/shopt.o: $(DEFSRC)/shopt.def
+builtins/source.o: $(DEFSRC)/source.def
+builtins/suspend.o: $(DEFSRC)/suspend.def
+builtins/test.o: $(DEFSRC)/test.def
+builtins/times.o: $(DEFSRC)/times.def
+builtins/trap.o: $(DEFSRC)/trap.def
+builtins/type.o: $(DEFSRC)/type.def
+builtins/ulimit.o: $(DEFSRC)/ulimit.def
+builtins/umask.o: $(DEFSRC)/umask.def
+builtins/wait.o: $(DEFSRC)/wait.def
diff --git a/NEWS b/NEWS
new file mode 100644
index 0000000..a6170be
--- /dev/null
+++ b/NEWS
@@ -0,0 +1,2403 @@
+This is a terse description of the new features added to bash-5.1 since
+the release of bash-5.0.  As always, the manual page (doc/bash.1) is
+the place to look for complete descriptions.
+
+1. New Features in Bash
+
+a. `bind -x' now supports different bindings for different editing modes and
+   keymaps.
+
+b. Bash attempts to optimize the number of times it forks when executing
+   commands in subshells and from `bash -c'.
+
+c. Here documents and here strings now use pipes for the expanded document if
+   it's smaller than the pipe buffer size, reverting to temporary files if it's
+   larger.
+
+d. There are new loadable builtins: mktemp, accept, mkfifo, csv, cut/lcut
+
+e. In posix mode, `trap -p' now displays signals whose disposition is SIG_DFL
+   and those that were SIG_IGN when the shell starts.
+
+f. The shell now expands the history number (e.g., in PS1) even if it is not
+   currently saving commands to the history list.
+
+g. `read -e' may now be used with arbitrary file descriptors (`read -u N').
+
+h. The `select' builtin now runs traps if its internal call to the read builtin
+   is interrupted by a signal.
+
+i. SRANDOM: a new variable that expands to a 32-bit random number that is not
+   produced by an LCRNG, and uses getrandom/getentropy, falling back to
+   /dev/urandom or arc4random if available. There is a fallback generator if
+   none of these are available.
+
+j. shell-transpose-words: a new bindable readline command that uses the same
+   definition of word as shell-forward-word, etc.
+
+k. The shell now adds default bindings for shell-forward-word,
+   shell-backward-word, shell-transpose-words, and shell-kill-word.
+
+l. Bash now allows ARGV0 appearing in the initial shell environment to set $0.
+
+m. If `unset' is executed without option arguments, bash tries to unset a shell
+   function if a name argument cannot be a shell variable name because it's not
+   an identifier.
+
+n. The `test -N' operator uses nanosecond timestamp granularity if it's
+   available.
+
+o. Bash posix mode now treats assignment statements preceding shell function
+   definitions the same as in its default mode, since POSIX has changed and
+   no longer requires those assignments to persist after the function returns
+   (POSIX interp 654).
+
+p. BASH_REMATCH is no longer readonly.
+
+q. wait: has a new -p VARNAME option, which stores the PID returned by `wait -n'
+   or `wait' without arguments.
+
+r. Sorting the results of pathname expansion now uses byte-by-byte comparisons
+   if two strings collate equally to impose a total order; the result of a
+   POSIX interpretation.
+
+s. Bash now allows SIGINT trap handlers to execute recursively.
+
+t. Bash now saves and restores state around setting and unsetting posix mode,
+   instead of having unsetting posix mode set a known state.
+
+u. Process substitution is now available in posix mode.
+
+v. READLINE_MARK: a new variable available while executing commands bound with
+   `bind -x', contains the value of the mark.
+
+w. Bash removes SIGCHLD from the set of blocked signals if it's blocked at shell
+   startup.
+
+x. `test -v N' can now test whether or not positional parameter N is set.
+
+y. `local' now honors the `-p' option to display all local variables at the
+    current context.
+
+z. The `@a' variable transformation now prints attributes for unset array
+   variables.
+
+aa. The `@A' variable transformation now prints a declare command that sets a
+    variable's attributes if the variable has attributes but is unset.
+
+bb. `declare' and `local' now have a -I option that inherits attributes and
+    value from a variable with the same name at a previous scope.
+
+cc. When run from a -c command, `jobs' now reports the status of completed jobs.
+
+dd. New `U', `u', and `L' parameter transformations to convert to uppercase,
+    convert first character to uppercase, and convert to lowercase,
+    respectively.
+
+ee. PROMPT_COMMAND: can now be an  array variable, each element of which can
+    contain a command to be executed like a string PROMPT_COMMAND variable.
+
+ff. `ulimit' has a -R option to report and set the RLIMIT_RTTIME resource.
+
+gg. Associative arrays may be assigned using a list of key-value pairs within
+    a compound assignment. Compound assignments where the words are not of
+    the form [key]=value are assumed to be key-value assignments. A missing or
+    empty key is an error; a missing value is treated as NULL. Assignments may
+    not mix the two forms.
+
+hh. New `K' parameter transformation to display associative arrays as key-
+    value pairs.
+
+ii. Writing history to syslog now handles messages longer than the syslog max
+    length by writing multiple messages with a sequence number.
+
+jj. SECONDS and RANDOM may now be assigned using arithmetic expressions, since
+    they are nominally integer variables. LINENO is not an integer variable.
+
+kk. Bash temporarily suppresses the verbose option when running the DEBUG trap
+    while running a command from the `fc' builtin.
+
+ll. `wait -n' now accepts a list of job specifications as arguments and will
+    wait for the first one in the list to change state.
+
+mm. The associative array implementation can now dynamically increase the
+    size of the hash table based on insertion patterns.
+
+nn. HISTFILE is now readonly in a restricted shell.
+
+oo. The bash malloc now returns memory that is 16-byte aligned on 64-bit
+    systems.
+
+pp. If the hash builtin is listing hashed filenames portably, don't print
+   anything if the table is empty.
+
+qq. GLOBIGNORE now ignores `.' and `..' as a terminal pathname component.
+
+rr. Bash attempts to optimize away forks in the last command in a function body
+    under appropriate circumstances.
+
+ss. The globbing code now uses fnmatch(3) to check collation elements (if
+    available) even in cases without multibyte characters.
+
+tt. The `fg' and `bg' builtins now return an error in a command substitution
+    when asked to restart a job inherited from the parent shell.
+
+uu. The shell now attempts to unlink all FIFOs on exit, whether a consuming
+    process has finished with them or not.
+
+vv. There is a new contributed loadable builtin: asort.
+
+2. New Features in Readline
+
+a. If a second consecutive completion attempt produces matches where the first
+   did not, treat it as a new completion attempt and insert a match as
+   appropriate.
+
+b. Bracketed paste mode works in more places: incremental search strings, vi
+   overstrike mode, character search, and reading numeric arguments.
+
+c. Readline automatically switches to horizontal scrolling if the terminal has
+   only one line.
+
+d. Unbinding all key sequences bound to a particular readline function now
+   descends into keymaps for multi-key sequences.
+
+e. rl-clear-display: new bindable command that clears the screen and, if
+   possible, the scrollback buffer (bound to emacs mode M-C-l by default).
+
+f. New active mark and face feature: when enabled, it will highlight the text
+   inserted by a bracketed paste (the `active region') and the text found by
+   incremental and non-incremental history searches. This is tied to bracketed
+   paste and can be disabled by turning off bracketed paste.
+
+g. Readline sets the mark in several additional commands.
+
+h. Bracketed paste mode is enabled by default.
+
+i. Readline tries to take advantage of the more regular structure of UTF-8
+   characters to identify the beginning and end of characters when moving
+   through the line buffer.
+
+j. The bindable operate-and-get-next command (and its default bindings) are
+   now part of readline instead of a bash-specific addition.
+
+k. The signal cleanup code now blocks SIGINT while processing after a SIGINT.
+
+-------------------------------------------------------------------------------
+This is a terse description of the new features added to bash-5.0 since
+the release of bash-4.4.  As always, the manual page (doc/bash.1) is
+the place to look for complete descriptions.
+
+1.  New Features in Bash
+
+a. The `wait' builtin can now wait for the last process substitution created.
+
+b. There is an EPOCHSECONDS variable, which expands to the time in seconds
+   since the Unix epoch.
+
+c. There is an EPOCHREALTIME variable, which expands to the time in seconds
+   since the Unix epoch with microsecond granularity.
+
+d. New loadable builtins: rm, stat, fdflags.
+
+e. BASH_ARGV0: a new variable that expands to $0 and sets $0 on assignment.
+
+f. When supplied a numeric argument, the shell-expand-line bindable readline
+   command does not perform quote removal and suppresses command and process
+   substitution.
+
+g. `history -d' understands negative arguments: negative arguments offset from
+   the end of the history list.
+
+h. The `name' argument to the `coproc' reserved word now undergoes word
+   expansion, so unique coprocs can be created in loops.
+
+i. A nameref name resolution loop in a function now resolves to a variable by
+   that name in the global scope.
+
+j. The `wait' builtin now has a `-f' option, which signifies to wait until the
+   specified job or process terminates, instead of waiting until it changes
+   state.
+
+k. There is a define in config-top.h that allows the shell to use a static
+   value for $PATH, overriding whatever is in the environment at startup, for
+   use by the restricted shell.
+
+l. Process substitution does not inherit the `v' option, like command
+   substitution.
+
+m. If a non-interactive shell with job control enabled detects that a foreground
+   job died due to SIGINT, it acts as if it received the SIGINT.
+
+n. The SIGCHLD trap is run once for each exiting child process even if job
+   control is not enabled when the shell is in Posix mode.
+
+o. A new shopt option: localvar_inherit; if set, a local variable inherits the
+   value of a variable with the same name at the nearest preceding scope.
+
+p. `bind -r' now checks whether a key sequence is bound before binding it to
+   NULL, to avoid creating keymaps for a multi-key sequence.
+
+q. A numeric argument to the line editing `operate-and-get-next' command
+   specifies which history entry to use.
+
+r. The positional parameters are now assigned before running the shell startup
+   files, so startup files can use $@.
+
+s. There is a compile-time option that forces the shell to disable the check
+   for an inherited OLDPWD being a directory.
+
+t. The `history' builtin can now delete ranges of history entries using
+   `-d start-end'.
+
+u. The `vi-edit-and-execute-command' bindable readline command now puts readline
+   back in vi insertion mode after executing commands from the edited file.
+
+v. The command completion code now matches aliases and shell function names
+   case-insensitively if the readline completion-ignore-case variable is set.
+
+w. There is a new `assoc_expand_once' shell option that attempts to expand
+   associative array subscripts only once.
+
+x. The shell only sets up BASH_ARGV and BASH_ARGC at startup if extended
+   debugging mode is active. The old behavior of unconditionally setting them
+   is available as part of the shell compatibility options.
+
+y. The `umask' builtin now allows modes and masks greater than octal 777.
+
+z. The `times' builtin now honors the current locale when printing a decimal
+   point.
+
+aa. There is a new (disabled by default, undocumented) shell option to enable
+    and disable sending history to syslog at runtime.
+
+bb. Bash no longer allows variable assignments preceding a special builtin that
+    changes variable attributes to propagate back to the calling environment
+    unless the compatibility level is 44 or lower.
+
+cc. You can set the default value for $HISTSIZE at build time in config-top.h.
+
+dd. The `complete' builtin now accepts a -I option that applies the completion
+    to the initial word on the line.
+
+ee.  The internal bash malloc now uses mmap (if available) to satisfy requests
+    greater than 128K bytes, so free can use mfree to return the pages to the
+    kernel.
+
+ff. The shell doesn't automatically set BASH_ARGC and BASH_ARGV at startup
+    unless it's in debugging mode, as the documentation has always said, but
+    will dynamically create them if a script references them at the top level
+    without having enabled debugging mode.
+
+gg. The localvar_inherit option will not attempt to inherit a value from a
+    variable of an incompatible type (indexed vs. associative arrays, for
+    example).
+
+hh. The `globasciiranges' option is now enabled by default; it can be set to
+    off by default at configuration time.
+
+ii. Associative and indexed arrays now allow subscripts consisting solely of
+    whitespace.
+
+jj. `checkwinsize' is now enabled by default.
+
+kk. The `localvar_unset' shopt option is now visible and documented.
+
+ll. The `progcomp_alias' shopt option is now visible and documented.
+
+mm. The signal name processing code now understands `SIGRTMIN+n' all the way
+    up to SIGRTMAX.
+
+nn. There is a new `seq' loadable builtin.
+
+oo. Trap execution now honors the (internal) max invocations of `eval', since
+    traps are supposed to be executed as if using `eval'.
+
+pp. The $_ variable doesn't change when the shell executes a command that forks.
+
+qq. The `kill' builtin now supports -sSIGNAME and -nSIGNUM, even though
+    conforming applications aren't supposed to use them.
+
+rr. POSIX mode now enables the `shift_verbose' option.
+
+2.  New Features in Readline
+
+a. Non-incremental vi-mode search (`N', `n') can search for a shell pattern, as
+   Posix specifies (uses fnmatch(3) if available).
+
+b. There are new `next-screen-line' and `previous-screen-line' bindable
+   commands, which move the cursor to the same column in the next, or previous,
+   physical line, respectively.
+
+c. There are default key bindings for control-arrow-key key combinations.
+
+d. A negative argument (-N) to `quoted-insert' means to insert the next N
+   characters using quoted-insert.
+
+e. New public function: rl_check_signals(), which allows applications to
+   respond to signals that readline catches while waiting for input using
+   a custom read function.
+
+f. There is new support for conditionally testing the readline version in an
+   inputrc file, with a full set of arithmetic comparison operators available.
+
+g. There is a simple variable comparison facility available for use within an
+   inputrc file. Allowable operators are equality and inequality; string
+   variables may be compared to a value; boolean variables must be compared to
+   either `on' or `off'; variable names are separated from the operator by
+   whitespace.
+
+h. The history expansion library now understands command and process
+   substitution and extended globbing and allows them to appear anywhere in a
+   word.
+
+i. The history library has a new variable that allows applications to set the
+   initial quoting state, so quoting state can be inherited from a previous
+   line.
+
+j. Readline now allows application-defined keymap names; there is a new public
+   function, rl_set_keymap_name(), to do that.
+
+k. The "Insert" keypad key, if available, now puts readline into overwrite
+   mode.
+
+-------------------------------------------------------------------------------
+This is a terse description of the new features added to bash-4.4 since
+the release of bash-4.3.  As always, the manual page (doc/bash.1) is
+the place to look for complete descriptions.
+
+1.  New Features in Bash
+
+a.  There is now a settable configuration #define that will cause the shell
+    to exit if the shell is running setuid without the -p option and setuid
+    to the real uid fails.
+
+b.  Command and process substitutions now turn off the `-v' option when
+    executing, as other shells seem to do.
+
+c.  The default value for the `checkhash' shell option may now be set at
+    compile time with a #define.
+
+d.  The `mapfile' builtin now has a -d option to use an arbitrary character
+    as the record delimiter, and a -t option  to strip the delimiter as
+    supplied with -d.
+
+e.  The maximum number of nested recursive calls to `eval' is now settable in
+    config-top.h; the default is no limit.
+
+f.  The `-p' option to declare and similar builtins will display attributes for
+    named variables even when those variables have not been assigned values
+    (which are technically unset).
+
+g.  The maximum number of nested recursive calls to `source' is now settable
+    in config-top.h; the default is no limit.
+
+h.  All builtin commands recognize the `--help' option and print a usage
+    summary.
+
+i.  Bash does not allow function names containing `/' and `=' to be exported.
+
+j.  The `ulimit' builtin has new -k (kqueues) and -P (pseudoterminals) options.
+
+k.  The shell now allows `time ; othercommand' to time null commands.
+
+l.  There is a new `--enable-function-import' configuration option to allow
+    importing shell functions from the environment; import is enabled by
+    default.
+
+m.  `printf -v var ""' will now set `var' to the empty string, as if `var=""'
+    had been executed.
+
+n.  GLOBIGNORE, the pattern substitution word expansion, and programmable
+    completion match filtering now honor the value of the `nocasematch' option.
+
+o.  There is a new ${parameter@spec} family of operators to transform the
+    value of `parameter'.
+
+p.  Bash no longer attempts to perform compound assignment if a variable on the
+    rhs of an assignment statement argument to `declare' has the form of a
+    compound assignment (e.g., w='(word)' ; declare foo=$w); compound
+    assignments are accepted if the variable was already declared as an array,
+    but with a warning.
+
+q.  The declare builtin no longer displays array variables using the compound
+    assignment syntax with quotes; that will generate warnings when re-used as
+    input, and isn't necessary.
+
+r.  Executing the rhs of && and || will no longer cause the shell to fork if
+    it's not necessary.
+
+s.  The `local' builtin takes a new argument: `-', which will cause it to save
+    and the single-letter shell options and restore their previous values at
+    function return.
+
+t.  `complete' and `compgen' have a new `-o nosort' option, which forces
+    readline to not sort the completion matches.
+
+u.  Bash now allows waiting for the most recent process substitution, since it
+    appears as $!.
+
+v.  The `unset' builtin now unsets a scalar variable if it is subscripted with
+    a `0', analogous to the ${var[0]} expansion.
+
+w.  `set -i' is no longer valid, as in other shells.
+
+x.  BASH_SUBSHELL is now updated for process substitution and group commands
+    in pipelines, and is available with the same value when running any exit
+    trap.
+
+y.  Bash now checks $INSIDE_EMACS as well as $EMACS when deciding whether or
+    not bash is being run in a GNU Emacs shell window.
+
+z.  Bash now treats SIGINT received when running a non-builtin command in a
+    loop the way it has traditionally treated running a builtin command:
+    running any trap handler and breaking out of the loop.
+
+aa. New variable: EXECIGNORE; a colon-separate list of patterns that will
+    cause matching filenames to be ignored when searching for commands.
+
+bb. Aliases whose value ends in a shell metacharacter now expand in a way to
+    allow them to be `pasted' to the next token, which can potentially change
+    the meaning of a command (e.g., turning `&' into `&&').
+
+cc. `make install' now installs the example loadable builtins and a set of
+    bash headers to use when developing new loadable builtins.
+
+dd. `enable -f' now attempts to call functions named BUILTIN_builtin_load when
+    loading BUILTIN, and BUILTIN_builtin_unload when deleting it.  This allows
+    loadable builtins to run initialization and cleanup code.
+
+ee. There is a new BASH_LOADABLES_PATH variable containing a list of directories
+    where the `enable -f' command looks for shared objects containing loadable
+    builtins.
+
+ff. The `complete_fullquote' option to `shopt' changes filename completion to
+    quote all shell metacharacters in filenames and directory names.
+
+gg. The `kill' builtin now has a `-L' option, equivalent to `-l', for
+    compatibility with Linux standalone versions of kill.
+
+hh. BASH_COMPAT and FUNCNEST can be inherited and set from the shell's initial
+    environment.
+
+ii. inherit_errexit: a new `shopt' option that, when set, causes command
+    substitutions to inherit the -e option.  By default, those subshells disable
+    -e.  It's enabled as part of turning on posix mode.
+
+jj. New prompt string: PS0.  Expanded and displayed by interactive shells after
+    reading a complete command but before executing it.
+
+kk. Interactive shells now behave as if SIGTSTP/SIGTTIN/SIGTTOU are set to
+    SIG_DFL when the shell is started, so they are set to SIG_DFL in child
+    processes.
+
+ll. Posix-mode shells now allow double quotes to quote the history expansion
+    character.
+
+mm. OLDPWD can be inherited from the environment if it names a directory.
+
+nn. Shells running as root no longer inherit PS4 from the environment, closing
+    a security hole involving PS4 expansion performing command substitution.
+
+oo. If executing an implicit `cd' when the `autocd' option is set, bash will
+    now invoke a function named `cd' if one exists before executing the `cd'
+    builtin.
+
+pp. Value conversions (arithmetic expansions, case modification, etc.) now
+    happen when assigning elements of an array using compound assignment.
+
+qq. There is a new option settable in config-top.h that makes multiple
+    directory arguments to `cd' a fatal error.
+
+rr. Bash now uses mktemp() when creating internal temporary files; it produces
+    a warning at build time on many Linux systems.
+
+2.  New Features in Readline
+
+a.  The history truncation code now uses the same error recovery mechanism as
+    the history writing code, and restores the old version of the history file
+    on error.  The error recovery mechanism handles symlinked history files.
+
+b.  There is a new bindable variable, `enable-bracketed-paste', which enables
+    support for a terminal's bracketed paste mode.
+
+c.  The editing mode indicators can now be strings and are user-settable
+    (new `emacs-mode-string', `vi-cmd-mode-string' and `vi-ins-mode-string'
+    variables).  Mode strings can contain invisible character sequences.
+    Setting mode strings to null strings restores the defaults.
+
+d.  Prompt expansion adds the mode string to the last line of a multi-line
+    prompt (one with embedded newlines).
+
+e.  There is a new bindable variable, `colored-completion-prefix', which, if
+    set, causes the common prefix of a set of possible completions to be
+    displayed in color.
+
+f.  There is a new bindable command `vi-yank-pop', a vi-mode version of emacs-
+    mode yank-pop.
+
+g.  The redisplay code underwent several efficiency improvements for multibyte
+    locales.
+
+h.  The insert-char function attempts to batch-insert all pending typeahead
+    that maps to self-insert, as long as it is coming from the terminal.
+
+i.  rl_callback_sigcleanup: a new application function that can clean up and
+    unset any state set by readline's callback mode.  Intended to be used
+    after a signal.
+
+j.  If an incremental search string has its last character removed with DEL, the
+    resulting empty search string no longer matches the previous line.
+
+k.  If readline reads a history file that begins with `#' (or the value of
+    the history comment character) and has enabled history timestamps, the
+    history entries are assumed to be delimited by timestamps.  This allows
+    multi-line history entries.
+
+l.  Readline now throws an error if it parses a key binding without a
+    terminating `:' or whitespace.
+
+m.  The default binding for ^W in vi mode now uses word boundaries specified
+    by Posix (vi-unix-word-rubout is bindable command name).
+
+n.  rl_clear_visible_line: new application-callable function; clears all
+    screen lines occupied by the current visible readline line.
+
+o.  rl_tty_set_echoing: application-callable function that controls whether
+    or not readline thinks it is echoing terminal output.
+
+p.  Handle >| and strings of digits preceding and following redirection
+    specifications as single tokens when tokenizing the line for history
+    expansion.
+
+q.  Fixed a bug with displaying completions when the prefix display length
+    is greater than the length of the completions to be displayed.
+
+r.  The :p history modifier now applies to the entire line, so any expansion
+    specifying :p causes the line to be printed instead of expanded.
+
+s.  New application-callable function: rl_pending_signal(): returns the signal
+    number of any signal readline has caught but not yet handled.
+
+t.  New application-settable variable: rl_persistent_signal_handlers: if set
+    to a non-zero value, readline will enable the readline-6.2 signal handler
+    behavior in callback mode: handlers are installed when
+    rl_callback_handler_install is called and removed removed when a complete
+    line has been read.
+
+-------------------------------------------------------------------------------
+This is a terse description of the new features added to bash-4.3 since
+the release of bash-4.2.  As always, the manual page (doc/bash.1) is
+the place to look for complete descriptions.
+
+1.  New Features in Bash
+
+a.  The `helptopic' completion action now maps to all the help topics, not just
+    the shell builtins.
+
+b.  The `help' builtin no longer does prefix substring matching first, so
+    `help read' does not match `readonly', but will do it if exact string
+    matching fails.
+
+c.  The shell can be compiled to not display a message about processes that
+    terminate due to SIGTERM.
+
+d.  Non-interactive shells now react to the setting of checkwinsize and set
+    LINES and COLUMNS after a foreground job exits.
+
+e.  There is a new shell option, `globasciiranges', which, when set to on,
+    forces globbing range comparisons to use character ordering as if they
+    were run in the C locale.
+
+f.  There is a new shell option, `direxpand', which makes filename completion
+    expand variables in directory names in the way bash-4.1 did.
+
+g.  In Posix mode, the `command' builtin does not change whether or not a
+    builtin it shadows is treated as an assignment builtin.
+
+h.  The `return' and `exit' builtins accept negative exit status arguments.
+
+i.  The word completion code checks whether or not a filename containing a
+    shell variable expands to a directory name and appends `/' to the word
+    as appropriate.  The same code expands shell variables in command names
+    when performing command completion.
+
+j.  In Posix mode, it is now an error to attempt to define a shell function
+    with the same name as a Posix special builtin.
+
+k.  When compiled for strict Posix conformance, history expansion is disabled
+    by default.
+
+l.  The history expansion character (!) does not cause history expansion when
+    followed by the closing quote in a double-quoted string.
+
+m.  `complete' and its siblings compgen/compopt now takes a new `-o noquote'
+    option to inhibit quoting of the completions.
+
+n.  Setting HISTSIZE to a value less than zero causes the history list to be
+    unlimited (setting it 0 zero disables the history list).
+
+o.  Setting HISTFILESIZE to a value less than zero causes the history file size
+    to be unlimited (setting it to 0 causes the history file to be truncated
+    to zero size).
+
+p.  The `read' builtin now skips NUL bytes in the input.
+
+q.  There is a new `bind -X' option to print all key sequences bound to Unix
+    commands.
+
+r.  When in Posix mode, `read' is interruptible by a trapped signal.  After
+    running the trap handler, read returns 128+signal and throws away any
+    partially-read input.
+
+s.  The command completion code skips whitespace and assignment statements
+    before looking for the command name word to be completed.
+
+t.  The build process has a new mechanism for constructing separate help files
+    that better reflects the current set of compilation options.
+
+u.  The -nt and -ot options to test now work with files with nanosecond
+    timestamp resolution.
+
+v.  The shell saves the command history in any shell for which history is
+    enabled and HISTFILE is set, not just interactive shells.
+
+w.  The shell has `nameref' variables and new -n(/+n) options to declare and
+    unset to use them, and a `test -R' option to test for them.
+
+x.  The shell now allows assigning, referencing, and unsetting elements of
+    indexed arrays using negative subscripts (a[-1]=2, echo ${a[-1]}) which
+    count back from the last element of the array.
+
+y.  The {x}<word redirection feature now allows words like {array[ind]} and
+    can use variables with special meanings to the shell (e.g., BASH_XTRACEFD).
+
+z.  There is a new CHILD_MAX special shell variable; its value controls the
+    number of exited child statues the shell remembers.
+
+aa. There is a new configuration option (--enable-direxpand-default) that
+    causes the `direxpand' shell option to be enabled by default.
+
+bb. Bash does not do anything special to ensure that the file descriptor
+    assigned to X in {x}<foo remains open after the block containing it
+    completes.
+
+cc. The `wait' builtin has a new `-n' option to wait for the next child to
+    change status.
+
+dd. The `printf' %(...)T format specifier now uses the current time if no
+    argument is supplied.
+
+ee. There is a new variable, BASH_COMPAT, that controls the current shell
+    compatibility level.
+
+ff. The `popd' builtin now treats additional arguments as errors.
+
+gg. The brace expansion code now treats a failed sequence expansion as a
+    simple string and will continue to expand brace terms in the remainder
+    of the word.
+
+hh. Shells started to run process substitutions now run any trap set on EXIT.
+
+ii. The fc builtin now interprets -0 as the current command line.
+
+jj. Completing directory names containing shell variables now adds a trailing
+    slash if the expanded result is a directory.
+
+kk. `cd' has a new `-@' option to browse a file's extended attributes on
+    systems that support O_XATTR.
+
+ll. The test/[/[[ `-v variable' binary operator now understands array
+    references.
+
+2.  New Features in Readline
+
+a.  Readline is now more responsive to SIGHUP and other fatal signals when
+    reading input from the terminal or performing word completion but no
+    longer attempts to run any not-allowable functions from a signal handler
+    context.
+
+b.  There are new bindable commands to search the history for the string of
+    characters between the beginning of the line and the point
+    (history-substring-search-forward, history-substring-search-backward)
+
+c.  Readline allows quoted strings as the values of variables when setting
+    them with `set'.  As a side effect, trailing spaces and tabs are ignored
+    when setting a string variable's value.
+
+d.  The history library creates a backup of the history file when writing it
+    and restores the backup on a write error.
+
+e.  New application-settable variable: rl_filename_stat_hook: a function called
+    with a filename before using it in a call to stat(2).  Bash uses it to
+    expand shell variables so things like $HOME/Downloads have a slash
+    appended.
+
+f.  New bindable function `print-last-kbd-macro', prints the most-recently-
+    defined keyboard macro in a reusable format.
+
+g.  New user-settable variable `colored-stats', enables use of colored text
+    to denote file types when displaying possible completions (colored analog
+    of visible-stats).
+
+h.  New user-settable variable `keyseq-timout', acts as an inter-character
+    timeout when reading input or incremental search strings.
+
+i.  New application-callable function: rl_clear_history. Clears the history list
+    and frees all readline-associated private data.
+
+j.  New user-settable variable, show-mode-in-prompt, adds a characters to the
+    beginning of the prompt indicating the current editing mode.
+
+k.  New application-settable variable: rl_input_available_hook; function to be
+    called when readline detects there is data available on its input file
+    descriptor.
+
+l.  Readline calls an application-set event hook (rl_event_hook) after it gets
+    a signal while reading input (read returns -1/EINTR but readline does not
+    handle the signal immediately) to allow the application to handle or
+    otherwise note it.
+
+m.  If the user-settable variable `history-size' is set to a value less than
+    0, the history list size is unlimited.
+
+n.  New application-settable variable: rl_signal_event_hook; function that is
+    called when readline is reading terminal input and read(2) is interrupted
+    by a signal.  Currently not called for SIGHUP or SIGTERM.
+
+o.  rl_change_environment: new application-settable variable that controls
+    whether or not Readline modifies the environment (currently readline
+    modifies only LINES and COLUMNS).
+
+-------------------------------------------------------------------------------
+This is a terse description of the new features added to bash-4.2 since
+the release of bash-4.1.  As always, the manual page (doc/bash.1) is
+the place to look for complete descriptions.
+
+1.  New Features in Bash
+
+a.  `exec -a foo' now sets $0 to `foo' in an executable shell script without a
+    leading #!.
+
+b.  Subshells begun to execute command substitutions or run shell functions or
+    builtins in subshells do not reset trap strings until a new trap is
+    specified.  This allows $(trap) to display the caller's traps and the
+    trap strings to persist until a new trap is set.
+
+c.  `trap -p' will now show signals ignored at shell startup, though their
+    disposition still cannot be modified.
+
+d.  $'...', echo, and printf understand \uXXXX and \UXXXXXXXX escape sequences.
+
+e.  declare/typeset has a new `-g' option, which creates variables in the
+    global scope even when run in a shell function.
+
+f.  test/[/[[ have a new -v variable unary operator, which returns success if
+    `variable' has been set.
+
+g.  Posix parsing changes to allow `! time command' and multiple consecutive
+    instances of `!' (which toggle) and `time' (which have no cumulative
+    effect).
+
+h.  Posix change to allow `time' as a command by itself to print the elapsed
+    user, system, and real times for the shell and its children.
+
+j.  $((...)) is always parsed as an arithmetic expansion first, instead of as
+    a potential nested command substitution, as Posix requires.
+
+k.  A new FUNCNEST variable to allow the user to control the maximum shell
+    function nesting (recursive execution) level.
+
+l.  The mapfile builtin now supplies a third argument to the callback command:
+    the line about to be assigned to the supplied array index.
+
+m.  The printf builtin has a new %(fmt)T specifier, which allows time values
+    to use strftime-like formatting.
+
+n.  There is a new `compat41' shell option.
+
+o.  The cd builtin has a new Posix-mandated `-e' option.
+
+p.  Negative subscripts to indexed arrays, previously errors, now are treated
+    as offsets from the maximum assigned index + 1.
+
+q.  Negative length specifications in the ${var:offset:length} expansion,
+    previously errors, are now treated as offsets from the end of the variable.
+
+r.  Parsing change to allow `time -p --'.
+
+s.  Posix-mode parsing change to not recognize `time' as a keyword if the
+    following token begins with a `-'.  This means no more Posix-mode
+    `time -p'.  Posix interpretation 267.
+
+t.  There is a new `lastpipe' shell option that runs the last command of a
+    pipeline in the current shell context.  The lastpipe option has no
+    effect if job control is enabled.
+
+u.  History expansion no longer expands the `$!' variable expansion.
+
+v.  Posix mode shells no longer exit if a variable assignment error occurs
+    with an assignment preceding a command that is not a special builtin.
+
+w.  Non-interactive mode shells exit if -u is enabled and an attempt is made
+    to use an unset variable with the % or # expansions, the `//', `^', or
+    `,' expansions, or the parameter length expansion.
+
+x.  Posix-mode shells use the argument passed to `.' as-is if a $PATH search
+    fails, effectively searching the current directory.  Posix-2008 change.
+
+2.  New Features in Readline
+
+a.  The history library does not try to write the history filename in the
+    current directory if $HOME is unset.  This closes a potential security
+    problem if the application does not specify a history filename.
+
+b.  New bindable variable `completion-display-width' to set the number of
+    columns used when displaying completions.
+
+c.  New bindable variable `completion-case-map' to cause case-insensitive
+    completion to treat `-' and `_' as identical.
+
+d.  There are new bindable vi-mode command names to avoid readline's case-
+    insensitive matching not allowing them to be bound separately.
+
+e.  New bindable variable `menu-complete-display-prefix' causes the menu
+    completion code to display the common prefix of the possible completions
+    before cycling through the list, instead of after.
+
+-------------------------------------------------------------------------------
+This is a terse description of the new features added to bash-4.1 since
+the release of bash-4.0.  As always, the manual page (doc/bash.1) is
+the place to look for complete descriptions.
+
+1.  New Features in Bash
+
+a.  Here-documents within $(...) command substitutions may once more be
+    delimited by the closing right paren, instead of requiring a newline.
+
+b.  Bash's file status checks (executable, readable, etc.) now take file
+    system ACLs into account on file systems that support them.
+
+c.  Bash now passes environment variables with names that are not valid
+    shell variable names through into the environment passed to child
+    processes.
+
+d.  The `execute-unix-command' readline function now attempts to clear and
+    reuse the current line rather than move to a new one after the command
+    executes.
+
+e.  `printf -v' can now assign values to array indices.
+
+f.  New `complete -E' and `compopt -E' options that work on the "empty"
+    completion: completion attempted on an empty command line.
+
+g.  New complete/compgen/compopt -D option to define a `default' completion:
+    a completion to be invoked on command for which no completion has been
+    defined.  If this function returns 124, programmable completion is
+    attempted again, allowing a user to dynamically build a set of completions
+    as completion is attempted by having the default completion function
+    install individual completion functions each time it is invoked.
+
+h.  When displaying associative arrays, subscripts are now quoted.
+
+i.  Changes to dabbrev-expand to make it more `emacs-like': no space appended
+    after matches, completions are not sorted, and most recent history entries
+    are presented first.
+
+j.  The [[ and (( commands are now subject to the setting of `set -e' and the
+    ERR trap.
+
+k.  The source/. builtin now removes NUL bytes from the file before attempting
+    to parse commands.
+
+l.  There is a new configuration option (in config-top.h) that forces bash to
+    forward all history entries to syslog.
+
+m.  A new variable $BASHOPTS to export shell options settable using `shopt' to
+    child processes.
+
+n.  There is a new confgure option that forces the extglob option to be
+    enabled by default.
+
+o.  New variable $BASH_XTRACEFD; when set to an integer bash will write xtrace
+    output to that file descriptor.
+
+p.  If the optional left-hand-side of a redirection is of the form {var}, the
+    shell assigns the file descriptor used to $var or uses $var as the file
+    descriptor to move or close, depending on the redirection operator.
+
+q.  The < and > operators to the [[ conditional command now do string
+    comparison according to the current locale if the compatibility level
+    is greater than 40.
+
+r.  Programmable completion now uses the completion for `b' instead of `a'
+    when completion is attempted on a line like: a $(b c.
+
+s.  Force extglob on temporarily when parsing the pattern argument to
+    the == and != operators to the [[ command, for compatibility.
+
+t.  Changed the behavior of interrupting the wait builtin when a SIGCHLD is
+    received and a trap on SIGCHLD is set to be Posix-mode only.
+
+u.  The read builtin has a new `-N nchars' option, which reads exactly NCHARS
+    characters, ignoring delimiters like newline.
+
+v.  The mapfile/readarray builtin no longer stores the commands it invokes via
+    callbacks in the history list.
+
+w.  There is a new `compat40' shopt option.
+
+2.  New Features in Readline
+
+a.  New bindable function: menu-complete-backward.
+
+b.  In the vi insertion keymap, C-n is now bound to menu-complete by default,
+    and C-p to menu-complete-backward.
+
+c.  When in vi command mode, repeatedly hitting ESC now does nothing, even
+    when ESC introduces a bound key sequence.  This is closer to how
+    historical vi behaves.
+
+d.  New bindable function: skip-csi-sequence.  Can be used as a default to
+    consume key sequences generated by keys like Home and End without having
+    to bind all keys.
+
+e.  New application-settable function: rl_filename_rewrite_hook.  Can be used
+    to rewite or modify filenames read from the file system before they are
+    compared to the word to be completed.
+
+f.  New bindable variable: skip-completed-text, active when completing in the
+    middle of a word.  If enabled, it means that characters in the completion
+    that match characters in the remainder of the word are "skipped" rather
+    than inserted into the line.
+
+g.  The pre-readline-6.0 version of menu completion is available as
+    "old-menu-complete" for users who do not like the readline-6.0 version.
+
+h.  New bindable variable: echo-control-characters.  If enabled, and the
+    tty ECHOCTL bit is set, controls the echoing of characters corresponding
+    to keyboard-generated signals.
+
+i.  New bindable variable: enable-meta-key.  Controls whether or not readline
+    sends the smm/rmm sequences if the terminal indicates it has a meta key
+    that enables eight-bit characters.
+
+-------------------------------------------------------------------------------
+This is a terse description of the new features added to bash-4.0 since
+the release of bash-3.2.  As always, the manual page (doc/bash.1) is
+the place to look for complete descriptions.
+
+1.  New Features in Bash
+
+a.  When using substring expansion on the positional parameters, a starting
+    index of 0 now causes $0 to be prefixed to the list.
+
+b.  The `help' builtin now prints its columns with entries sorted vertically
+    rather than horizontally.
+
+c.  There is a new variable, $BASHPID, which always returns the process id of
+    the current shell.
+
+d.  There is a new `autocd' option that, when enabled, causes bash to attempt
+    to `cd' to a directory name that is supplied as the first word of a
+    simple command.
+
+e.  There is a new `checkjobs' option that causes the shell to check for and
+    report any running or stopped jobs at exit.
+
+f.  The programmable completion code exports a new COMP_TYPE variable, set to
+    a character describing the type of completion being attempted.
+
+g.  The programmable completion code exports a new COMP_KEY variable, set to
+    the character that caused the completion to be invoked (e.g., TAB).
+
+h.  If creation of a child process fails due to insufficient resources, bash
+    will try again several times before reporting failure.
+
+i.  The programmable completion code now uses the same set of characters as
+    readline when breaking the command line into a list of words.
+
+j.  The block multiplier for the ulimit -c and -f options is now 512 when in
+    Posix mode, as Posix specifies.
+
+k.  Changed the behavior of the read builtin to save any partial input received
+    in the specified variable when the read builtin times out.  This also
+    results in variables specified as arguments to read to be set to the empty
+    string when there is no input available.  When the read builtin times out,
+    it returns an exit status greater than 128.
+
+l.  The shell now has the notion of a `compatibility level', controlled by
+    new variables settable by `shopt'.  Setting this variable currently
+    restores the bash-3.1 behavior when processing quoted strings on the rhs
+    of the `=~' operator to the `[[' command.
+
+m.  The `ulimit' builtin now has new -b (socket buffer size) and -T (number
+    of threads) options.
+
+n.  The -p option to `declare' now displays all variable values and attributes
+    (or function values and attributes if used with -f).
+
+o.  There is a new `compopt' builtin that allows completion functions to modify
+    completion options for existing completions or the completion currently
+    being executed.
+
+p.  The `read' builtin has a new -i option which inserts text into the reply
+    buffer when using readline.
+
+q.  A new `-E' option to the complete builtin allows control of the default
+    behavior for completion on an empty line.
+
+r.  There is now limited support for completing command name words containing
+    globbing characters.
+
+s.  Changed format of internal help documentation for all builtins to roughly
+    follow man page format.
+
+t.  The `help' builtin now has a new -d option, to display a short description,
+    and a -m option, to print help information in a man page-like format.
+
+u.  There is a new `mapfile' builtin to populate an array with lines from a
+    given file.  The name `readarray' is a synonym.
+
+v.  If a command is not found, the shell attempts to execute a shell function
+    named `command_not_found_handle', supplying the command words as the
+    function arguments.
+
+w.  There is a new shell option: `globstar'.  When enabled, the globbing code
+    treats `**' specially -- it matches all directories (and files within
+    them, when appropriate) recursively.
+
+x.  There is a new shell option: `dirspell'.  When enabled, the filename
+    completion code performs spelling correction on directory names during
+    completion.
+
+y.  The `-t' option to the `read' builtin now supports fractional timeout
+    values.
+
+z.  Brace expansion now allows zero-padding of expanded numeric values and
+    will add the proper number of zeroes to make sure all values contain the
+    same number of digits.
+
+aa. There is a new bash-specific bindable readline function: `dabbrev-expand'.
+    It uses menu completion on a set of words taken from the history list.
+
+bb. The command assigned to a key sequence with `bind -x' now sets two new
+    variables in the environment of the executed command:  READLINE_LINE_BUFFER
+    and READLINE_POINT.  The command can change the current readline line
+    and cursor position by modifying READLINE_LINE_BUFFER and READLINE_POINT,
+    respectively.
+
+cc. There is a new &>> redirection operator, which appends the standard output
+    and standard error to the named file.
+
+dd. The parser now understands `|&' as a synonym for `2>&1 |', which redirects
+    the standard error for a command through a pipe.
+
+ee. The new `;&' case statement action list terminator causes execution to
+    continue with the action associated with the next pattern in the
+    statement rather than terminating the command.
+
+ff. The new `;;&' case statement action list terminator causes the shell to
+    test the next set of patterns after completing execution of the current
+    action, rather than terminating the command.
+
+gg. The shell understands a new variable: PROMPT_DIRTRIM.  When set to an
+    integer value greater than zero, prompt expansion of \w and \W  will
+    retain only that number of trailing pathname components and replace
+    the intervening characters with `...'.
+
+hh. There are new case-modifying word expansions: uppercase (^[^]) and
+    lowercase (,[,]).  They can work on either the first character or
+    array element, or globally.  They accept an optional shell pattern
+    that determines which characters to modify.  There is an optionally-
+    configured feature to include capitalization operators.
+
+ii. The shell provides associative array variables, with the appropriate
+    support to create, delete, assign values to, and expand them.
+
+jj. The `declare' builtin now has new -l (convert value to lowercase upon
+    assignment) and -u (convert value to uppercase upon assignment) options.
+    There is an optionally-configurable -c option to capitalize a value at
+    assignment.
+
+kk. There is a new `coproc' reserved word that specifies a coprocess: an
+    asynchronous command run with two pipes connected to the creating shell.
+    Coprocs can be named.  The input and output file descriptors and the
+    PID of the coprocess are available to the calling shell in variables
+    with coproc-specific names.
+
+ll. A value of 0 for the -t option to `read' now returns success if there is
+    input available to be read from the specified file descriptor.
+
+mm. CDPATH and GLOBIGNORE are ignored when the shell is running in privileged
+    mode.
+
+nn. New bindable readline functions shell-forward-word and shell-backward-word,
+    which move forward and backward words delimited by shell metacharacters
+    and honor shell quoting.
+
+oo.  New bindable readline functions shell-backward-kill-word and shell-kill-word
+    which kill words backward and forward, but use the same word boundaries
+    as shell-forward-word and shell-backward-word.
+
+2.  New Features in Readline
+
+a.  A new variable, rl_sort_completion_matches; allows applications to inhibit
+    match list sorting (but beware: some things don't work right if
+    applications do this).
+
+b.  A new variable, rl_completion_invoking_key; allows applications to discover
+    the key that invoked rl_complete or rl_menu_complete.
+
+c.  The functions rl_block_sigint and rl_release_sigint are now public and
+    available to calling applications who want to protect critical sections
+    (like redisplay).
+
+d.  The functions rl_save_state and rl_restore_state are now public and
+    available to calling applications; documented rest of readline's state
+    flag values.
+
+e.  A new user-settable variable, `history-size', allows setting the maximum
+    number of entries in the history list.
+
+f.  There is a new implementation of menu completion, with several improvements
+    over the old; the most notable improvement is a better `completions
+    browsing' mode.
+
+g.  The menu completion code now uses the rl_menu_completion_entry_function
+    variable, allowing applications to provide their own menu completion
+    generators.
+
+h.  There is support for replacing a prefix  of a pathname with a `...' when
+    displaying possible completions.  This is controllable by setting the
+    `completion-prefix-display-length' variable.  Matches with a common prefix
+    longer than this value have the common prefix replaced with `...'.
+
+i.  There is a new `revert-all-at-newline' variable.  If enabled, readline will
+    undo all outstanding changes to all history lines when `accept-line' is
+    executed.
+
+j.  If the kernel supports it, readline displays special characters
+    corresponding to a keyboard-generated signal when the signal is received.
+
+-------------------------------------------------------------------------------
+This is a terse description of the new features added to bash-3.2 since
+the release of bash-3.1.  As always, the manual page (doc/bash.1) is
+the place to look for complete descriptions.
+
+1.  New Features in Bash
+
+a.  Changed the parameter pattern replacement functions to not anchor the
+    pattern at the beginning of the string if doing global replacement - that
+    combination doesn't make any sense.
+
+b.  When running in `word expansion only' mode (--wordexp option), inhibit
+    process substitution.
+
+c.  Loadable builtins now work on MacOS X 10.[34].
+
+d.  Shells running in posix mode no longer set $HOME, as POSIX requires.
+
+e.  The code that checks for binary files being executed as shell scripts now
+    checks only for NUL rather than any non-printing character.
+
+f.  Quoting the string argument to the [[ command's  =~ operator now forces
+    string matching, as with the other pattern-matching operators.
+
+2.  New Features in Readline
+
+a.  Calling applications can now set the keyboard timeout to 0, allowing
+    poll-like behavior.
+
+b.  The value of SYS_INPUTRC (configurable at compilation time) is now used as
+    the default last-ditch startup file.
+
+c.  The history file reading functions now allow windows-like \r\n line
+    terminators.
+
+-------------------------------------------------------------------------------
+This is a terse description of the new features added to bash-3.1 since
+the release of bash-3.0.  As always, the manual page (doc/bash.1) is
+the place to look for complete descriptions.
+
+1.  New Features in Bash
+
+a.  Bash now understands LC_TIME as a special variable so that time display
+    tracks the current locale.
+
+b.  BASH_ARGC, BASH_ARGV, BASH_SOURCE, and BASH_LINENO are no longer created
+    as `invisible' variables and may not be unset.
+
+c.  In POSIX mode, if `xpg_echo' option is enabled, the `echo' builtin doesn't
+    try to interpret any options at all, as POSIX requires.
+
+d.  The `bg' builtin now accepts multiple arguments, as POSIX seems to specify.
+
+e.  Fixed vi-mode word completion and glob expansion to perform tilde
+    expansion.
+
+f.  The `**' mathematic exponentiation operator is now right-associative.
+
+g.  The `ulimit' builtin has new options: -i (max number of pending signals),
+    -q (max size of POSIX message queues), and -x (max number of file locks).
+
+h.  A bare `%' once again expands to the current job when used as a job
+    specifier.
+
+i.  The `+=' assignment operator (append to the value of a string or array) is
+    now supported for assignment statements and arguments to builtin commands
+    that accept assignment statements.
+
+j.  BASH_COMMAND now preserves its value when a DEBUG trap is executed.
+
+k.  The `gnu_errfmt' option is enabled automatically if the shell is running
+    in an emacs terminal window.
+
+l.  New configuration option:  --single-help-strings.  Causes long help text
+    to be written as a single string; intended to ease translation.
+
+m.  The COMP_WORDBREAKS variable now causes the list of word break characters
+    to be emptied when the variable is unset.
+
+n.  An unquoted expansion of $* when $IFS is empty now causes the positional
+    parameters to be concatenated if the expansion doesn't undergo word
+    splitting.
+
+o.  Bash now inherits $_ from the environment if it appears there at startup.
+
+p.  New shell option: nocasematch.  If non-zero, shell pattern matching ignores
+    case when used by `case' and `[[' commands.
+
+q.  The `printf' builtin takes a new option: -v var.  That causes the output
+    to be placed into var instead of on stdout.
+
+r.  By default, the shell no longer reports processes dying from SIGPIPE.
+
+s.  Bash now sets the extern variable `environ' to the export environment it
+    creates, so C library functions that call getenv() (and can't use the
+    shell-provided replacement) get current values of environment variables.
+
+t.  A new configuration option, `--enable-strict-posix-default', which will
+    build bash to be POSIX conforming by default.
+
+u.  If compiled for strict POSIX conformance, LINES and COLUMNS may now
+    override the true terminal size.
+
+2.  New Features in Readline
+
+a.  The key sequence sent by the keypad `delete' key is now automatically
+    bound to delete-char.
+
+b.  A negative argument to menu-complete now cycles backward through the
+    completion list.
+
+c.  A new bindable readline variable:  bind-tty-special-chars.  If non-zero,
+    readline will bind the terminal special characters to their readline
+    equivalents when it's called (on by default).
+
+d.  New bindable command: vi-rubout.  Saves deleted text for possible
+    reinsertion, as with any vi-mode `text modification' command; `X' is bound
+    to this in vi command mode.
+
+e.  A new external application-controllable variable that allows the LINES
+    and COLUMNS environment variables to set the window size regardless of
+    what the kernel returns: rl_prefer_env_winsize
+
+-------------------------------------------------------------------------------
+This is a terse description of the new features added to bash-3.0 since
+the release of bash-2.05b.  As always, the manual page (doc/bash.1) is
+the place to look for complete descriptions.
+
+1.  New Features in Bash
+
+a.  ANSI string expansion now implements the \x{hexdigits} escape.
+
+b.  There is a new loadable `strftime' builtin.
+
+c.  New variable, COMP_WORDBREAKS, which controls the readline completer's
+    idea of word break characters.
+
+d.  The `type' builtin no longer reports on aliases unless alias expansion
+    will actually be performed.    
+
+e.  HISTCONTROL is now a colon-separated list of values, which permits
+    more extensibility and backwards compatibility.
+
+f.  HISTCONTROL may now include the `erasedups' option, which causes all lines
+    matching a line being added to be removed from the history list.
+
+g.  `configure' has a new `--enable-multibyte' argument that permits multibyte
+    character support to be disabled even on systems that support it.
+
+h.  New variables to support the bash debugger:  BASH_ARGC, BASH_ARGV,
+    BASH_SOURCE, BASH_LINENO, BASH_SUBSHELL, BASH_EXECUTION_STRING,
+    BASH_COMMAND
+
+i.  FUNCNAME has been changed to support the debugger: it's now an array
+    variable.
+
+j.  for, case, select, arithmetic commands now keep line number information
+    for the debugger.
+
+k.  There is a new `RETURN' trap executed when a function or sourced script
+    returns (not inherited child processes; inherited by command substitution
+    if function tracing is enabled and the debugger is active).
+
+l.  New invocation option:  --debugger.  Enables debugging and turns on new
+    `extdebug' shell option.
+
+m.  New `functrace' and `errtrace' options to `set -o' cause DEBUG and ERR
+    traps, respectively, to be inherited by shell functions.  Equivalent to
+    `set -T' and `set -E' respectively.  The `functrace' option also controls
+    whether or not the DEBUG trap is inherited by sourced scripts.
+
+n.  The DEBUG trap is run before binding the variable and running the action
+    list in a `for' command, binding the selection variable and running the
+    query in a `select' command, and before attempting a match in a `case'
+    command.
+
+o.  New `--enable-debugger' option to `configure' to compile in the debugger
+    support code.
+
+p.  `declare -F' now prints out extra line number and source file information
+    if the `extdebug' option is set.
+
+q.  If `extdebug' is enabled, a non-zero return value from a DEBUG trap causes
+    the next command to be skipped, and a return value of 2 while in a
+    function or sourced script forces a `return'.
+
+r.  New `caller' builtin to provide a call stack for the bash debugger.
+
+s.  The DEBUG trap is run just before the first command in a function body is
+    executed, for the debugger.
+
+t.  `for', `select', and `case' command heads are printed when `set -x' is
+    enabled.
+
+u.  There is a new {x..y} brace expansion, which is shorthand for {x.x+1,
+    x+2,...,y}.  x and y can be integers or single characters; the sequence
+    may ascend or descend; the increment is always 1.
+
+v.  New ksh93-like ${!array[@]} expansion, expands to all the keys (indices)
+    of array.
+
+w.  New `force_fignore' shopt option; if enabled, suffixes specified by
+    FIGNORE cause words to be ignored when performing word completion even
+    if they're the only possibilities.
+
+x.  New `gnu_errfmt' shopt option; if enabled, error messages follow the `gnu
+    style' (filename:lineno:message) format.
+
+y.  New `-o bashdefault' option to complete and compgen; if set, causes the
+    whole set of bash completions to be performed if the compspec doesn't
+    result in a match.
+
+z.  New `-o plusdirs' option to complete and compgen; if set, causes directory
+    name completion to be performed and the results added to the rest of the
+    possible completions.
+
+aa. `kill' is available as a builtin even when the shell is built without
+    job control.
+
+bb. New HISTTIMEFORMAT variable; value is a format string to pass to
+    strftime(3).  If set and not null, the `history' builtin prints out
+    timestamp information according to the specified format when displaying
+    history entries.  If set, bash tells the history library to write out
+    timestamp information when the history file is written.
+
+cc. The [[ ... ]] command has a new binary `=~' operator that performs
+    extended regular expression (egrep-like) matching.
+
+dd. `configure' has a new `--enable-cond-regexp' option (enabled by default)
+    to enable the =~ operator and regexp matching in [[ ... ]].
+
+ee. Subexpressions matched by the =~ operator are placed in the new
+    BASH_REMATCH array variable.
+
+ff. New `failglob' option that causes an expansion error when pathname
+    expansion fails to produce a match.
+
+gg. New `set -o pipefail' option that causes a pipeline to return a failure
+    status if any of the processes in the pipeline fail, not just the last
+    one.
+
+hh. printf builtin understands two new escape sequences:  \" and \?.
+
+ii. `echo -e' understands two new escape sequences:  \" and \?.
+
+jj. The GNU `gettext' package and libintl have been integrated; the shell's
+    messages can be translated into different languages.
+
+kk. The `\W' prompt expansion now abbreviates $HOME as `~', like `\w'.
+
+ll. The error message printed when bash cannot open a shell script supplied
+    as argument 1 now includes the name of the shell, to better identify
+    the error as coming from bash.
+
+mm. The parameter pattern removal and substitution expansions are now much
+    faster and more efficient when using multibyte characters.
+
+nn. The `jobs', `kill', and `wait' builtins now accept job control notation
+    even if job control is not enabled.
+
+oo. The historical behavior of `trap' that allows a missing `action' argument
+    to cause each specified signal's handling to be reset to its default is
+    now only supported when `trap' is given a single non-option argument.
+
+2.  New Features in Readline
+
+a.  History expansion has a new `a' modifier equivalent to the `g' modifier
+    for compatibility with the BSD csh.
+
+b.  History expansion has a new `G' modifier equivalent to the BSD csh `g'
+    modifier, which performs a substitution once per word.
+
+c.  All non-incremental search operations may now undo the operation of
+    replacing the current line with the history line.
+
+d.  The text inserted by an `a' command in vi mode can be reinserted with
+    `.'.
+
+e.  New bindable variable, `show-all-if-unmodified'.  If set, the readline
+    completer will list possible completions immediately if there is more
+    than one completion and partial completion cannot be performed.
+
+f.  There is a new application-callable `free_history_entry()' function.
+
+g.  History list entries now contain timestamp information; the history file
+    functions know how to read and write timestamp information associated
+    with each entry.
+
+h.  Four new key binding functions have been added:
+
+	rl_bind_key_if_unbound()
+	rl_bind_key_if_unbound_in_map()
+	rl_bind_keyseq_if_unbound()
+	rl_bind_keyseq_if_unbound_in_map()
+
+i.  New application variable, rl_completion_quote_character, set to any
+    quote character readline finds before it calls the application completion
+    function.
+
+j.  New application variable, rl_completion_suppress_quote, settable by an
+    application completion function.  If set to non-zero, readline does not
+    attempt to append a closing quote to a completed word.
+
+k.  New application variable, rl_completion_found_quote, set to a non-zero
+    value if readline determines that the word to be completed is quoted.
+    Set before readline calls any application completion function.
+
+l.  New function hook, rl_completion_word_break_hook, called when readline
+    needs to break a line into words when completion is attempted.  Allows
+    the word break characters to vary based on position in the line.
+
+m.  New bindable command: unix-filename-rubout.  Does the same thing as
+    unix-word-rubout, but adds `/' to the set of word delimiters.
+
+n.  When listing completions, directories have a `/' appended if the
+    `mark-directories' option has been enabled.
+
+-------------------------------------------------------------------------------
+This is a terse description of the new features added to bash-2.05b since
+the release of bash-2.05a.  As always, the manual page (doc/bash.1) is
+the place to look for complete descriptions.
+
+1.  New Features in Bash
+
+a.  If set, TMOUT is the default timeout for the `read' builtin.
+
+b.  `type' has two new options:  `-f' suppresses shell function lookup, and
+    `-P' forces a $PATH search.
+
+c.  New code to handle multibyte characters.
+
+d.  `select' was changed to be more ksh-compatible, in that the menu is
+    reprinted each time through the loop only if REPLY is set to NULL.
+    The previous behavior is available as a compile-time option.
+
+e.  `complete -d' and `complete -o dirnames' now force a slash to be
+    appended to names which are symlinks to directories.
+
+f.  There is now a bindable edit-and-execute-command readline command,
+    like the vi-mode `v' command, bound to C-xC-e in emacs mode.
+
+g.  Added support for ksh93-like [:word:] character class in pattern matching.
+
+h.  The  $'...' quoting construct now expands \cX to Control-X.
+
+i.  A new \D{...} prompt expansion; passes the `...' to strftime and inserts
+    the result into the expanded prompt.
+
+j.  The shell now performs arithmetic in the largest integer size the
+    machine supports (intmax_t), instead of long.
+
+k.  If a numeric argument is supplied to one of the bash globbing completion
+    functions, a `*' is appended to the word before expansion is attempted.
+
+l.  The bash globbing completion functions now allow completions to be listed
+    with double tabs or if `show-all-if-ambiguous' is set.
+
+m.  New `-o nospace' option for `complete' and `compgen' builtins; suppresses
+    readline's appending a space to the completed word.
+
+n.  New `here-string' redirection operator:  <<< word.
+
+o.  When displaying variables, function attributes and definitions are shown
+    separately, allowing them to be re-used as input (attempting to re-use
+    the old output would result in syntax errors).
+
+p.  There is a new configuration option `--enable-mem-scramble', controls
+    bash malloc behavior of writing garbage characters into memory at
+    allocation and free time.
+
+q.  The `complete' and `compgen' builtins now have a new `-s/-A service'
+    option to complete on names from /etc/services.
+
+r.  `read' has a new `-u fd' option to read from a specified file descriptor.
+
+s.  Fix the completion code so that expansion errors in a directory name
+    don't cause a longjmp back to the command loop.
+
+t.  Fixed word completion inside command substitution to work a little more
+    intuitively.
+
+u.  The `printf' %q format specifier now uses $'...' quoting to print the
+    argument if it contains non-printing characters.
+
+v.  The `declare' and `typeset' builtins have a new `-t' option.  When applied
+    to functions, it causes the DEBUG trap to be inherited by the named
+    function.  Currently has no effect on variables.
+
+w.  The DEBUG trap is now run *before* simple commands, ((...)) commands,
+    [[...]] conditional commands, and for ((...)) loops.
+
+x.  The expansion of $LINENO inside a shell function is only relative to the
+    function start if the shell is interactive -- if the shell is running a
+    script, $LINENO expands to the line number in the script.  This is as
+    POSIX-2001 requires.
+
+y.  The bash debugger in examples/bashdb has been modified to work with the
+    new DEBUG trap semantics, the command set has been made more gdb-like,
+    and the changes to $LINENO make debugging functions work better.  Code
+    from Gary Vaughan.
+
+z.  New [n]<&word- and [n]>&word- redirections from ksh93 -- move fds (dup
+    and close).
+
+aa. There is a new `-l' invocation option, equivalent to `--login'.
+
+bb. The `hash' builtin has a new `-l' option to list contents in a reusable
+    format, and a `-d' option to remove a name from the hash table.
+
+cc. There is now support for placing the long help text into separate files 
+    installed into ${datadir}/bash.  Not enabled by default; can be turned  
+    on with `--enable-separate-helpfiles' option to configure.
+    
+dd. All builtins that take operands accept a `--' pseudo-option, except
+    `echo'.
+
+ee. The `echo' builtin now accepts \0xxx (zero to three octal digits following
+    the `0') in addition to \xxx (one to three octal digits) for SUSv3/XPG6/
+    POSIX.1-2001 compliance.
+
+
+2.  New Features in Readline
+
+a.  Support for key `subsequences':  allows, e.g., ESC and ESC-a to both
+    be bound to readline functions.  Now the arrow keys may be used in vi
+    insert mode.
+
+b.  When listing completions, and the number of lines displayed is more than
+    the screen length, readline uses an internal pager to display the results.
+    This is controlled by the `page-completions' variable (default on).
+
+c.  New code to handle editing and displaying multibyte characters.
+
+d.  The behavior introduced in bash-2.05a of deciding whether or not to
+    append a slash to a completed name that is a symlink to a directory has
+    been made optional, controlled by the `mark-symlinked-directories'
+    variable (default is the 2.05a behavior).
+
+e.  The `insert-comment' command now acts as a toggle if given a numeric
+    argument:  if the first characters on the line don't specify a
+    comment, insert one; if they do, delete the comment text
+
+f.  New application-settable completion variable:
+    rl_completion_mark_symlink_dirs, allows an application's completion
+    function to temporarily override the user's preference for appending
+    slashes to names which are symlinks to directories.
+
+g.  New function available to application completion functions:
+    rl_completion_mode, to tell how the completion function was invoked
+    and decide which argument to supply to rl_complete_internal (to list
+    completions, etc.).
+
+h.  Readline now has an overwrite mode, toggled by the `overwrite-mode'
+    bindable command, which could be bound to `Insert'.
+
+i.  New application-settable completion variable:
+    rl_completion_suppress_append, inhibits appending of
+    rl_completion_append_character to completed words.
+
+j.  New key bindings when reading an incremental search string:  ^W yanks
+    the currently-matched word out of the current line into the search
+    string; ^Y yanks the rest of the current line into the search string,
+    DEL or ^H deletes characters from the search string.
+
+-------------------------------------------------------------------------------
+This is a terse description of the new features added to bash-2.05a since
+the release of bash-2.05.  As always, the manual page (doc/bash.1) is
+the place to look for complete descriptions.
+
+1.  New Features in Bash
+
+a.  Added support for DESTDIR installation root prefix, so you can do a
+    `make install DESTDIR=bash-root' and do easier binary packaging.
+
+b.  Added support for builtin printf "'" flag character as per latest POSIX
+    drafts.
+
+c.  Support for POSIX.2 printf(1) length specifiers `j', `t', and `z' (from
+    ISO C99).
+
+d.  New autoconf macro, RL_LIB_READLINE_VERSION, for use by other applications
+    (bash doesn't use very much of what it returns).
+
+e.  `set [-+]o nolog' is recognized as required by the latest POSIX drafts,
+    but ignored.
+
+f.  New read-only `shopt' option:  login_shell.  Set to non-zero value if the
+    shell is a login shell.
+
+g.  New `\A' prompt string escape sequence; expands to time in 24 HH:MM format.
+
+h.  New `-A group/-g' option to complete and compgen; does group name
+    completion.
+
+i.  New `-t' option to `hash' to list hash values for each filename argument.
+
+j.  New [-+]O invocation option to set and unset `shopt' options at startup.
+
+k.  configure's `--with-installed-readline' option now takes an optional
+    `=PATH' suffix to set the root of the tree where readline is installed
+    to PATH.
+
+l.  The ksh-like `ERR' trap has been added.  The `ERR' trap will be run
+    whenever the shell would have exited if the -e option were enabled.
+    It is not inherited by shell functions.
+
+m.  `readonly', `export', and `declare' now print variables which have been
+    given attributes but not set by assigning a value as just a command and
+    a variable name (like `export foo') when listing, as the latest POSIX
+    drafts require.
+
+n.  `bashbug' now requires that the subject be changed from the default.
+
+o.  configure has a new `--enable-largefile' option, like other GNU utilities.
+
+p.  `for' loops now allow empty word lists after `in', like the latest POSIX
+    drafts require.
+
+q.  The builtin `ulimit' now takes two new non-numeric arguments:  `hard',
+    meaning the current hard limit, and `soft', meaning the current soft  
+    limit, in addition to `unlimited'
+    
+r.  `ulimit' now prints the option letter associated with a particular
+    resource when printing more than one limit.
+
+s.  `ulimit' prints `hard' or `soft' when a value is not `unlimited' but is
+    one of RLIM_SAVED_MAX or RLIM_SAVED_CUR, respectively.
+
+t.  The `printf' builtin now handles the %a and %A conversions if they're
+    implemented by printf(3).
+
+u.  The `printf' builtin now handles the %F conversion (just about like %f).
+
+v.  The `printf' builtin now handles the %n conversion like printf(3).  The
+    corresponding argument is the name of a shell variable to which the
+    value is assigned.
+
+2.  New Features in Readline
+
+a.  Added extern declaration for rl_get_termcap to readline.h, making it a
+    public function (it was always there, just not in readline.h).
+
+b.  New #defines in readline.h:  RL_READLINE_VERSION, currently 0x0402,
+    RL_VERSION_MAJOR, currently 4, and RL_VERSION_MINOR, currently 2.
+
+c.  New readline variable:  rl_readline_version, mirrors RL_READLINE_VERSION.
+
+d.  New bindable boolean readline variable:  match-hidden-files.  Controls
+    completion of files beginning with a `.' (on Unix).  Enabled by default.
+
+e.  The history expansion code now allows any character to terminate a
+    `:first-' modifier, like csh.
+
+f.  New bindable variable `history-preserve-point'.  If set, the history
+    code attempts to place the user at the same location on each history
+    line retrieved with previous-history or next-history.
+
+-------------------------------------------------------------------------------
+This is a terse description of the new features added to bash-2.05 since
+the release of bash-2.04.  As always, the manual page (doc/bash.1) is
+the place to look for complete descriptions.
+
+1.  New Features in Bash
+
+a.  Added a new `--init-file' invocation argument as a synonym for `--rcfile',
+    per the new GNU coding standards.
+
+b.  The /dev/tcp and /dev/udp redirections now accept service names as well as
+    port numbers.
+
+c.  `complete' and `compgen' now take a `-o value' option, which controls some
+    of the aspects of that compspec.  Valid values are:
+
+        default - perform bash default completion if programmable
+                  completion produces no matches
+        dirnames - perform directory name completion if programmable
+                   completion produces no matches
+        filenames - tell readline that the compspec produces filenames,
+                    so it can do things like append slashes to
+                    directory names and suppress trailing spaces
+
+d.  A new loadable builtin, realpath, which canonicalizes and expands symlinks
+    in pathname arguments.
+    
+e.  When `set' is called without options, it prints function definitions in a
+    way that allows them to be reused as input.  This affects `declare' and 
+    `declare -p' as well.  This only happens when the shell is not in POSIX
+    mode, since POSIX.2 forbids this behavior.
+
+f.  Bash-2.05 once again honors the current locale setting when processing
+    ranges within pattern matching bracket expressions (e.g., [A-Z]).
+
+2.  New Features in Readline
+
+a.  The blink timeout for paren matching is now settable by applications,
+    via the rl_set_paren_blink_timeout() function.
+
+b.  _rl_executing_macro has been renamed to rl_executing_macro, which means
+    it's now part of the public interface.
+
+c.  Readline has a new variable, rl_readline_state, which is a bitmap that
+    encapsulates the current state of the library; intended for use by
+    callbacks and hook functions.
+
+d.  New application-callable function rl_set_prompt(const char *prompt):
+    expands its prompt string argument and sets rl_prompt to the result.
+
+e.  New application-callable function rl_set_screen_size(int rows, int cols):
+    public method for applications to set readline's idea of the screen
+    dimensions.
+
+f.  New function, rl_get_screen_size (int *rows, int *columns), returns
+    readline's idea of the screen dimensions.
+
+g.  The timeout in rl_gather_tyi (readline keyboard input polling function)
+    is now settable via a function (rl_set_keyboard_input_timeout()).
+
+h.  Renamed the max_input_history variable to history_max_entries; the old
+    variable is maintained for backwards compatibility.
+
+i.  The list of characters that separate words for the history tokenizer is
+    now settable with a variable:  history_word_delimiters.  The default
+    value is as before.
+
+-------------------------------------------------------------------------------
+This is a terse description of the new features added to bash-2.04 since
+the release of bash-2.03.  As always, the manual page (doc/bash.1) is
+the place to look for complete descriptions.
+
+1.  New Features in Bash
+
+a.  The history builtin has a `-d offset' option to delete the history entry
+    at position `offset'.
+
+b.  The prompt expansion code has two new escape sequences: \j, the number of
+    active jobs; and \l, the basename of the shell's tty device name.
+
+c.  The `bind' builtin has a new `-x' option to bind key sequences to shell   
+    commands.
+
+d.  There is a new shell option, no_empty_command_completion, which, when
+    enabled, disables command completion when TAB is typed on an empty line.
+
+e.  The `help' builtin has a `-s' option to just print a builtin's usage
+    synopsis.
+
+f.  There are several new arithmetic operators:  id++, id-- (variable
+    post-increment/decrement), ++id, --id (variable pre-increment/decrement),
+    expr1 , expr2 (comma operator).
+
+g.  There is a new ksh-93 style arithmetic for command:
+        for ((expr1 ; expr2; expr3 )); do list; done
+
+h.  The `read' builtin has a number of new options:
+        -t timeout      only wait timeout seconds for input
+        -n nchars       only read nchars from input instead of a full line
+        -d delim        read until delim rather than newline
+        -s              don't echo input chars as they are read
+
+i.  The redirection code now handles several filenames specially:
+    /dev/fd/N, /dev/stdin, /dev/stdout, and /dev/stderr, whether or
+    not they are present in the file system.
+
+j.  The redirection code now recognizes pathnames of the form
+    /dev/tcp/host/port and /dev/udp/host/port, and tries to open a socket
+    of the appropriate type to the specified port on the specified host.
+
+k.  The ksh-93 ${!prefix*} expansion, which expands to the names of all
+    shell variables with prefix PREFIX, has been implemented.
+
+l.  There is a new dynamic variable, FUNCNAME, which expands to the name of
+    a currently-executing function.  Assignments to FUNCNAME have no effect.
+
+m.  The GROUPS variable is no longer readonly; assignments to it are silently
+    discarded.  This means it can be unset.
+
+n.  A new programmable completion facility, with two new builtin commands:
+    complete and compgen.
+
+o.  configure has a new option, `--enable-progcomp', to compile in the
+    programmable completion features (enabled by default).
+
+p.  `shopt' has a new option, `progcomp', to enable and disable programmable
+    completion at runtime.
+
+q.  Unsetting HOSTFILE now clears the list of hostnames used for completion.
+
+r.  configure has a new option, `--enable-bash-malloc', replacing the old
+    `--with-gnu-malloc' (which is still present for backwards compatibility).
+
+s.  There is a new manual page describing rbash, the restricted shell.
+
+t.  `bashbug' has new `--help' and `--version' options.
+
+u.  `shopt' has a new `xpg_echo' option, which controls the behavior of
+    `echo' with respect to backslash-escaped characters at runtime.
+
+v.  If NON_INTERACTIVE_LOGIN_SHELLS is defined, all login shells read the
+    startup files, even if they are not interactive.
+
+w.  The LC_NUMERIC variable is now treated specially, and used to set the
+    LC_NUMERIC locale category for number formatting, e.g., when `printf'
+    displays floating-point numbers.
+
+2.  New features in Readline
+
+a.  Parentheses matching is now always compiled into readline, and enabled
+    or disabled when the value of the `blink-matching-paren' variable is
+    changed.
+
+b.  MS-DOS systems now use ~/_inputrc as the last-ditch inputrc filename.
+
+c.  MS-DOS systems now use ~/_history as the default history file.
+
+d.  history-search-{forward,backward} now leave the point at the end of the
+    line when the string to search for is empty, like
+    {reverse,forward}-search-history.
+
+e.  history-search-{forward,backward} now leave the last history line found
+    in the readline buffer if the second or subsequent search fails.
+
+f.  New function for use by applications:  rl_on_new_line_with_prompt, used
+    when an application displays the prompt itself before calling readline().
+
+g.  New variable for use by applications:  rl_already_prompted.  An application
+    that displays the prompt itself before calling readline() must set this to
+    a non-zero value.
+
+h.  A new variable, rl_gnu_readline_p, always 1.  The intent is that an
+    application can verify whether or not it is linked with the `real'
+    readline library or some substitute.
+
+-------------------------------------------------------------------------------
+This is a terse description of the new features added to bash-2.03 since
+the release of bash-2.02.  As always, the manual page (doc/bash.1) is
+the place to look for complete descriptions.
+
+1.  New Features in Bash
+
+a.  New `shopt' option, `restricted_shell', indicating whether or not the
+    shell was started in restricted mode, for use in startup files.
+
+b.  Filename generation is now performed on the words between ( and ) in
+    array assignments (which it probably should have done all along).
+
+c.  OLDPWD is now auto-exported, as POSIX.2 seems to require.
+
+d.  ENV and BASH_ENV are read-only variables in a restricted shell.
+
+e.  A change was made to the startup file code so that any shell begun with
+    the `--login' option, even non-interactive shells, will source the login
+    shell startup files.
+
+2.  New Features in Readline
+
+a.  Many changes to the signal handling:
+        o Readline now catches SIGQUIT and cleans up the tty before returning;
+        o A new variable, rl_catch_signals, is available to application writers 
+          to indicate to readline whether or not it should install its own
+          signal handlers for SIGINT, SIGTERM, SIGQUIT, SIGALRM, SIGTSTP,
+          SIGTTIN, and SIGTTOU;
+        o A new variable, rl_catch_sigwinch, is available to application
+          writers to indicate to readline whether or not it should install its
+          own signal handler for SIGWINCH, which will chain to the calling
+          applications's SIGWINCH handler, if one is installed;
+        o There is a new function, rl_free_line_state, for application signal
+          handlers to call to free up the state associated with the current
+          line after receiving a signal;
+        o There is a new function, rl_cleanup_after_signal, to clean up the
+          display and terminal state after receiving a signal;
+        o There is a new function, rl_reset_after_signal, to reinitialize the
+          terminal and display state after an application signal handler
+          returns and readline continues
+
+b.  There is a new function, rl_resize_terminal, to reset readline's idea of
+    the screen size after a SIGWINCH.
+
+c.  New public functions: rl_save_prompt and rl_restore_prompt.  These were
+    previously private functions with a `_' prefix.
+
+d.  New function hook: rl_pre_input_hook, called just before readline starts
+    reading input, after initialization.
+
+e.  New function hook: rl_display_matches_hook, called when readline would
+    display the list of completion matches.  The new function
+    rl_display_match_list is what readline uses internally, and is available
+    for use by application functions called via this hook.
+
+f.  New bindable function, delete-char-or-list, like tcsh.
+
+g.  A new variable, rl_erase_empty_line, which, if set by an application using
+    readline, will cause readline to erase, prompt and all, lines on which the
+    only thing typed was a newline.
+
+h.  New bindable variable: `isearch-terminators'.
+
+i.  New bindable function: `forward-backward-delete-char' (unbound by default).
+
+-------------------------------------------------------------------------------
+This is a terse description of the new features added to bash-2.02 since
+the release of bash-2.01.1.  As always, the manual page (doc/bash.1) is
+the place to look for complete descriptions.
+
+1. New Features in Bash
+
+a.  A new version of malloc, based on the older GNU malloc, that has many
+    changes, is more page-based, is more conservative with memory usage,
+    and does not `orphan' large blocks when they are freed.
+
+b.  A new version of gmalloc, based on the old GLIBC malloc, with many
+    changes and range checking included by default.
+
+c.  A new implementation of fnmatch(3) that includes full POSIX.2 Basic
+    Regular Expression matching, including character classes, collating
+    symbols, equivalence classes, and support for case-insensitive pattern
+    matching.
+
+d.  ksh-88 egrep-style extended pattern matching ([@+*?!](patlist)) has been
+    implemented, controlled by a new `shopt' option, `extglob'.  
+    
+e.  There is a new ksh-like `[[' compound command, which implements   
+    extended `test' functionality.
+    
+f.  There is a new `printf' builtin, implemented according to the POSIX.2
+    specification.
+    
+g.  There is a new feature for command substitution: $(< filename) now expands
+    to the contents of `filename', with any trailing newlines removed
+    (equivalent to $(cat filename)).
+
+h.  There are new tilde prefixes which expand to directories from the
+    directory stack.
+
+i.  There is a new `**' arithmetic operator to do exponentiation.
+
+j.  There are new configuration options to control how bash is linked:
+    `--enable-profiling', to allow bash to be profiled with gprof, and
+    `--enable-static-link', to allow bash to be linked statically.
+
+k.  There is a new configuration option, `--enable-cond-command', which
+    controls whether or not the `[[' command is included.  It is on by
+    default. 
+
+l.  There is a new configuration option, `--enable-extended-glob', which
+    controls whether or not the ksh extended globbing feature is included.
+    It is enabled by default.
+
+m.  There is a new configuration #define in config.h.top that, when enabled,
+    will cause all login shells to source /etc/profile and one of the user-
+    specific login shell startup files, whether or not the shell is
+    interactive.  
+    
+n.  There is a new invocation option, `--dump-po-strings', to dump
+    a shell script's translatable strings ($"...") in GNU `po' format. 
+    
+o.  There is a new `shopt' option, `nocaseglob', to enable case-insensitive
+    pattern matching when globbing filenames and using the `case' construct.
+
+p.  There is a new `shopt' option, `huponexit', which, when enabled, causes
+    the shell to send SIGHUP to all jobs when an interactive login shell
+    exits.
+
+q.  `bind' has a new `-u' option, which takes a readline function name as an
+    argument and unbinds all key sequences bound to that function in a
+    specified keymap.
+    
+r.  `disown' now has `-a' and `-r' options, to limit operation to all jobs
+    and running jobs, respectively.
+
+s.  The `shopt' `-p' option now causes output to be displayed in a reusable
+    format.
+    
+t.  `test' has a new `-N' option, which returns true if the filename argument
+    has been modified since it was last accessed.
+
+u.  `umask' now has a `-p' option to print output in a reusable format.
+    
+v.  A new escape sequence, `\xNNN', has been added to the `echo -e' and $'...'
+    translation code.  It expands to the character whose ascii code is NNN
+    in hexadecimal.
+    
+w.  The prompt string expansion code has a new `\r' escape sequence.
+
+x.  The shell may now be cross-compiled for the CYGWIN32 environment on
+    a Unix machine.
+
+2. New Features in Readline
+
+a.  There is now an option for `iterative' yank-last-arg handline, so a user
+    can keep entering `M-.', yanking the last argument of successive history
+    lines.
+
+b.  New variable, `print-completions-horizontally', which causes completion
+    matches to be displayed across the screen (like `ls -x') rather than up
+    and down the screen (like `ls').
+
+c.  New variable, `completion-ignore-case', which causes filename completion
+    and matching to be performed case-insensitively.
+
+d.  There is a new bindable command, `magic-space', which causes history
+    expansion to be performed on the current readline buffer and a space to
+    be inserted into the result.
+
+e.  There is a new bindable command, `menu-complete', which enables tcsh-like
+    menu completion (successive executions of menu-complete insert a single
+    completion match, cycling through the list of possible completions).
+
+f.  There is a new bindable command, `paste-from-clipboard', for use on Win32
+    systems, to insert the text from the Win32 clipboard into the editing
+    buffer.
+
+g.  The key sequence translation code now understands printf-style backslash
+    escape sequences, including \NNN octal escapes.  These escape sequences
+    may be used in key sequence definitions or macro values.
+
+h.  An `$include' inputrc file parser directive has been added.
+
+-------------------------------------------------------------------------------
+This is a terse description of the new features added to bash-2.01 since
+the release of bash-2.0.  As always, the manual page (doc/bash.1) is the
+place to look for complete descriptions.
+
+1. New Features in Bash
+
+a.  There is a new builtin array variable: GROUPS, the set of groups to which
+    the user belongs.  This is used by the test suite.
+
+2.  New Features in Readline
+
+a.  If a key sequence bound to `universal-argument' is read while reading a
+    numeric argument started with `universal-argument', it terminates the
+    argument but is otherwise ignored.  This provides a way to insert multiple
+    instances of a digit string, and is how GNU emacs does it.
+
+-------------------------------------------------------------------------------
+This is a terse description of the new features added to bash-2.0 since
+the release of bash-1.14.7.  As always, the manual page (doc/bash.1) is
+the place to look for complete descriptions.
+
+1.  New Features in Bash
+
+a.  There is a new invocation option, -D, that dumps translatable strings
+    in a script.
+
+b.  The `long' invocation options must now be prefixed with `--'.
+
+c.  New long invocation options:  --dump-strings, --help, --verbose
+
+d.  The `nolineediting' invocation option was renamed to `noediting'.
+
+e.  The `nobraceexpansion' and `quiet' long invocation options were removed.
+
+f.  The `--help' and `--version' long options now work as the GNU coding
+    standards specify.
+
+g.  If invoked as `sh', bash now enters posix mode after reading the
+    startup files, and reads and executes commands from the file named
+    by $ENV if interactive (as POSIX.2 specifies).  A login shell invoked
+    as `sh' reads $ENV after /etc/profile and ~/.profile.
+
+h.  There is a new reserved word, `time', for timing pipelines, builtin
+    commands, and shell functions.  It uses the value of the TIMEFORMAT
+    variable as a format string describing how to print the timing
+    statistics.
+
+i.  The $'...' quoting syntax expands ANSI-C escapes in ... and leaves the
+    result single-quoted.
+
+j.  The $"..." quoting syntax performs locale-specific translation of ...
+    and leaves the result double-quoted.
+
+k.  LINENO now works correctly in functions.
+
+l.  New variables: DIRSTACK, PIPESTATUS, BASH_VERSINFO, HOSTNAME, SHELLOPTS,
+    MACHTYPE.  The first three are array variables.
+
+m.  The BASH_VERSION and BASH_VERSINFO variables now include the shell's
+    `release status' (alpha[N], beta[N], release).
+
+n.  Some variables have been removed:  MAIL_WARNING, notify, history_control,
+    command_oriented_history, glob_dot_filenames, allow_null_glob_expansion,
+    nolinks, hostname_completion_file, noclobber, no_exit_on_failed_exec, and
+    cdable_vars.  Most of them are now implemented with the new `shopt'
+    builtin; others were already implemented by `set'.
+
+o.  Bash now uses some new variables:  LC_ALL, LC_MESSAGES, LC_CTYPE,
+    LC_COLLATE, LANG, GLOBIGNORE, HISTIGNORE.
+
+p.  The shell now supports integer-indexed arrays of unlimited length,
+    with a new compound assignment syntax and changes to the appropriate
+    builtin commands (declare/typeset, read, readonly, etc.).  The array
+    index may be an arithmetic expression.
+
+q.  ${!var}: indirect variable expansion, equivalent to eval \${$var}.
+
+r.  ${parameter:offset[:length]}: variable substring extraction.
+
+s.  ${parameter/pattern[/[/]string]}: variable pattern substitution.
+
+t.  The $[...] arithmetic expansion syntax is no longer supported, in
+    favor of $((...)).
+
+u.  Aliases can now be expanded in shell scripts with a shell option
+    (shopt expand_aliases).
+
+v.  History and history expansion can now be used in scripts with
+    set -o history and set -H.
+
+w.  All builtins now return an exit status of 2 for incorrect usage.
+
+x.  Interactive shells resend SIGHUP to all running or stopped children
+    if (and only if) they exit due to a SIGHUP.
+
+y.  New prompting expansions: \a, \e, \H, \T, \@, \v, \V.
+
+z.  Variable expansion in prompt strings is now controllable via a shell
+    option (shopt promptvars).
+
+aa. Bash now defaults to using command-oriented history.
+
+bb. The history file ($HISTFILE) is now truncated to $HISTFILESIZE after
+    being written.
+
+cc. The POSIX.2 conditional arithmetic evaluation syntax (expr ? expr : expr)
+    has been implemented.
+
+dd. Each builtin now accepts `--' to signify the end of the options, except
+    as documented (echo, etc.).
+
+ee. All builtins use -p to display values in a re-readable format where
+    appropriate, except as documented (echo, type, etc.).
+
+ff. The `alias' builtin has a new -p option.
+
+gg. Changes to the `bind' builtin:
+	o has new options: -psPSVr.
+	o the `-d' option was renamed to `-p'
+	o the `-v' option now dumps variables; the old `-v' is now `-P'
+
+hh. The `bye' synonym for `exit' was removed.
+
+ii. The -L and -P options to `cd' and `pwd' have been documented.
+
+jj. The `cd' builtin now does spelling correction on the directory name
+    by default.  This is settable with a shell option (shopt cdspell).
+
+kk. The `declare' builtin has new options: -a, -F, -p.
+
+ll. The `dirs' builtin has new options: -c, -p, -v.
+
+mm. The new `disown' builtin removes jobs from the shell's jobs table
+    or inhibits the resending of SIGHUP when the shell receives a
+    SIGHUP.
+
+nn. The `echo' builtin has a new escape character: \e.
+
+oo. The `enable' builtin can now load new builtins dynamically from shared
+    objects on systems with the dlopen/dlsym interface.  There are a number
+    of examples in the examples/loadables directory.  There are also
+    new options: -d, -f, -s, -p.
+
+pp. The `-all' option to `enable' was removed in favor of `-a'.
+
+qq. The `exec' builtin has new options: -l, -c, -a.
+
+rr. The `hash' builtin has a new option: -p.
+
+ss. The `history' builtin has new options: -c, -p, -s.
+
+tt. The `jobs' builtin has new options: -r, -s.
+
+uu. The `kill' builtin has new options: -n signum, -l signame.
+
+vv. The `pushd' and `popd' builtins have a new option: -n.
+
+ww. The `read' builtin has new options: -p prompt, -e, -a.
+
+xx. The `readonly' builtin has a new -a option, and the -n option was removed.
+
+yy. Changes to the `set' builtin:
+	o new options: -B, -o keyword, -o onecmd, -o history
+	o options removed: -l, -d, -o nohash
+	o options changed: +o, -h, -o hashall
+	o now displays variables in a format that can be re-read as input
+
+zz. The new `shopt' builtin controls shell optional behavior previously
+    done by setting and unsetting certain shell variables.
+
+aaa. The `test' builtin has new operators: -o option, s1 == s2, s1 < s2,
+     and s1 > s2, where s1 and s2 are strings.
+
+bbb. There is a new trap, DEBUG, executed after every simple command.
+
+ccc. The `trap' builtin has a new -p option.
+
+ddd. The `ulimit' builtin has a new -l option on 4.4BSD-based systems.
+
+eee. The PS1, PS2, PATH, and IFS variables may now be unset.
+
+fff. The restricted shell mode has been expanded and is now documented.
+
+ggg. Security improvements:
+	o functions are not imported from the environment if running setuid
+	  or with -p
+	o no startup files are sourced if running setuid or with -p
+
+hhh. The documentation has been overhauled:  the texinfo manual was
+     expanded, and HTML versions of the man page and texinfo manual
+     are included.
+
+iii. Changes to Posix mode:
+	o Command lookup now finds special builtins before shell functions.
+	o Failure of a special builtin causes a non-interactive shell to
+	  exit.  Failures are defined in the POSIX.2 specification.
+	o If the `cd' builtin finds a directory to change to using $CDPATH,
+	  the value assigned to PWD when `cd' completes does not contain
+	  any symbolic links.
+	o A non-interactive shell exits if a variable assignment error
+	  occurs when no command name follows the assignment statements.
+	o A non-interactive shell exits if the iteration variable in a
+	  `for' statement or the selection variable in a `select' statement
+	  is read-only or another variable assignment error occurs.
+	o The `<>' redirection operator now opens a file for both stdin and
+	  stdout by default, not just when in posix mode.
+	o Assignment statements preceding special builtins now persist in
+	  the shell's environment when the builtin completes.
+
+     Posix mode is now completely POSIX.2-compliant (modulo bugs).  When
+     invoked as sh, bash should be completely POSIX.2-compliant.
+
+jjj. The default value of PS1 is now "\s-\v\$ ".
+
+kkk. The ksh-like ((...)) arithmetic command syntax has been implemented.
+     This is exactly equivalent to `let "..."'.
+
+lll. Integer constants have been extended to base 64.
+
+mmm. The `ulimit' builtin now sets both hard and soft limits and reports the
+     soft limit by default.
+
+2.  New Features in Readline
+
+a.  New variables:  enable-keypad, input-meta (new name for meta-flag),
+    mark-directories, visible-stats (now documented), disable-completion,
+    comment-begin.
+
+b.  New bindable commands:  kill-region, copy-region-as-kill,
+    copy-backward-word, copy-forward-word, set-mark, exchange-point-and-mark,
+    character-search, character-search-backward, insert-comment,
+    glob-expand-word, glob-list-expansions, dump-variables, dump-macros.
+
+c.  New emacs keybindings:  delete-horizontal-space (M-\),
+    insert-completions (M-*), possible-completions (M-=).
+
+d.  The history-search-backward and history-search-forward commands were
+    modified to be the same as previous-line and next-line if point is at
+    the start of the line.
+
+e.  More file types are available for the visible-stats mode.
+
+3.  Changes of interest in the Bash implementation
+
+a.  There is a new autoconf-based configuration mechanism.
+
+b.  More things have been moved from Posix mode to standard shell behavior.
+
+c.  The trace output (set -x) now inserts quotes where necessary so it can
+    be reused as input.
+
+d.  There is a compile-time option for a system-wide interactive shell
+    startup file (disabled by default).
+
+e.  The YACC grammar is smaller and tighter, and all 66 shift-reduce
+    conflicts are gone.  Several parsing bugs have been fixed.
+
+f.  Builtin option parsing has been regularized (using internal_getopt()),
+    with the exception of `echo', `type', and `set'.
+
+g.  Builtins now return standard usage messages constructed from the
+    `short doc' used by the help builtin.
+
+h.  Completion now quotes using backslashes by default, but honors
+    user-supplied quotes.
+
+i.  The GNU libc malloc is available as a configure-time option.
+
+j.  There are more internationalization features; bash uses gettext if
+    it is available.  The $"..." translation syntax uses the current
+    locale and gettext.
+
+k.  There is better reporting of job termination when the shell is not
+    interactive.
+
+l.  The shell is somewhat more efficient: it uses a little less memory and
+    makes fewer system calls.
+
+4.  Changes of interest in the Readline implementation
+
+a.  There is now support for readline `callback' functions.
+
+b.  There is now support for user-supplied input, redisplay, and terminal
+    preparation functions.
+
+c.  Most of the shell-specific code in readline has been generalized or
+    removed.
+
+d.  Most of the annoying redisplay bugs have been fixed, notably the problems
+    with incremental search and excessive redrawing when special characters
+    appear in the prompt string.
+
+e.  There are new library functions and variables available to application
+    writers, most having to do with completion and quoting.
+
+f.  The NEWLINE character (^J) is now treated as a search terminator by the
+    incremental search functions.
+-------------------------------------------------------------------------------
+
+Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without any warranty.
diff --git a/NOTES b/NOTES
new file mode 100644
index 0000000..6fa019a
--- /dev/null
+++ b/NOTES
@@ -0,0 +1,352 @@
+Platform-Specific Configuration and Operation Notes [very dated]
+====================================================================
+
+1.  configure --without-gnu-malloc on:
+
+	alpha running OSF/1, Linux, or NetBSD (malloc needs 8-byte alignment;
+	bash malloc has 8-byte alignment now, but I have no alphas to test on)
+
+	next running NeXT/OS; machines running Openstep
+
+	all machines running SunOS YP code: SunOS4, SunOS5, HP/UX, if you
+	have problems with username completion or tilde expansion for
+	usernames found via YP/NIS
+
+	linux (optional, but don't do it if you're using Doug Lea's malloc)
+
+	QNX 4.2
+	other OSF/1 machines (KSR/1, HP, IBM AIX/ESA)
+	AIX
+	sparc SVR4, SVR4.2 (ICL reference port)
+	DG/UX
+	Cray
+	Haiku OS
+
+	NetBSD/sparc (malloc needs 8-byte alignment; bash malloc has 8-byte
+	alignment now, but I have no NetBSD machines to test on)
+
+	BSD/OS 2.1, 3.x if you want to use loadable builtins
+
+	Motorola m68k machines running System V.3.  There is a file descriptor
+	leak caused by using the bash malloc because closedir(3) needs to read
+	freed memory to find the file descriptor to close
+
+2.  Configure using shlicc2 on BSD/OS 2.1 and BSD/OS 3.x to use loadable
+    builtins
+
+3.  Bash cannot be built in a directory separate from the source directory
+    using configure --srcdir=... unless the version of `make' you're using
+    does $VPATH handling right.  The script support/mkclone can be used to
+    create a `build tree' using symlinks to get around this.
+
+4.  I've had reports that username completion (as well as tilde expansion
+    and \u prompt expansion) does not work on IRIX 5.3 when linking with
+    -lnsl.  This is only a problem when you're running NIS, since
+    apparently -lnsl supports only /etc/passwd and not the NIS functions
+    for retrieving usernames and passwords.  Editing the Makefile after
+    configure runs and removing the `-lnsl' from the assignment to `LIBS'
+    fixes the problem.
+
+5.  There is a problem with the `makewhatis' script in older (pre-7.0)
+    versions of Red Hat Linux.  Running `makewhatis' with bash-2.0 or
+    later versions results in error messages like this:
+
+    /usr/sbin/makewhatis: cd: manpath: No such file or directory
+    /usr/sbin/makewhatis: manpath/whatis: No such file or directory
+    chmod: manpath/whatis: No such file or directory
+    /usr/sbin/makewhatis: cd: catpath: No such file or directory
+    /usr/sbin/makewhatis: catpath/whatis: No such file or directory
+    chmod: catpath/whatis: No such file or directory
+
+    The problem is with `makewhatis'.  Red Hat (and possibly other
+    Linux distributors) uses a construct like this in the code:
+
+        eval path=$"$pages"path
+
+    to do indirect variable expansion.  This `happened to work' in
+    bash-1.14 and previous versions, but that was more an accident
+    of implementation than anything else -- it was never supported
+    and certainly is not portable.
+
+    Bash-2.0 has a new feature that gives a new meaning to $"...".
+    This is explained more completely in item 1 in the COMPAT file.
+
+    The three lines in the `makewhatis' script that need to be changed
+    look like this:
+
+             eval $topath=$"$topath":$name
+    [...]
+       eval path=$"$pages"path
+    [...]
+    eval path=$"$pages"path
+
+    The portable way to write this code is
+
+             eval $topath="\$$topath":$name
+       eval path="\$$pages"path
+    eval path="\$$pages"path
+
+    You could also experiment with another new bash feature: ${!var}.
+    This does indirect variable expansion, making the use of eval
+    unnecessary.
+
+6.  There is a problem with syslogd on many Linux distributions (Red Hat
+    and Slackware are two that I have received reports about).  syslogd
+    sends a SIGINT to its parent process, which is waiting for the daemon
+    to finish its initialization.  The parent process then dies due to
+    the SIGINT, and bash reports it, causing unexpected console output
+    while the system is booting that looks something like
+
+	starting daemons: syslogd/etc/rc.d/rc.M: line 29: 38 Interrupt ${NET}/syslogd
+
+    Bash-2.0 reports events such as processes dying in scripts due to
+    signals when the standard output is a tty.  Bash-1.14.x and previous
+    versions did not report such events.
+
+    This should probably be reported as a bug to whatever Linux distributor
+    people see the problem on.  In my opinion, syslogd should be changed to
+    use some other method of communication, or the wrapper function (which
+    appeared to be `daemon' when I looked at it some time ago) or script
+    (which appeared to be `syslog') should catch SIGINT, since it's an
+    expected event, and exit cleanly.
+
+7.  Several people have reported that `dip' (a program for SLIP/PPP
+    on Linux) does not work with bash-2.0 installed as /bin/sh.
+
+    I don't run any Linux boxes myself, and do not have the dip
+    code handy to look at, but the `problem' with bash-2.0, as
+    it has been related to me, is that bash requires the `-p'
+    option to be supplied at invocation if it is to run setuid
+    or setgid. 
+
+    This means, among other things, that setuid or setgid programs
+    which call system(3) (a horrendously bad practice in any case)
+    relinquish their setuid/setgid status in the child that's forked
+    to execute /bin/sh. 
+
+    The following is an *unofficial* patch to bash-2.0 that causes it
+    to not require `-p' to run setuid or setgid if invoked as `sh'.
+    It has been reported to work on Linux.  It will make your system
+    vulnerable to bogus system(3) calls in setuid executables.
+
+--- ../bash-2.0.orig/shell.c    Wed Dec 18 14:16:30 1996
++++ shell.c     Fri Mar  7 13:12:03 1997
+@@ -347,7 +347,7 @@
+   if (posixly_correct)
+     posix_initialize (posixly_correct);
+
+-  if (running_setuid && privileged_mode == 0)
++  if (running_setuid && privileged_mode == 0 && act_like_sh == 0)
+     disable_priv_mode ();
+
+   /* Need to get the argument to a -c option processed in the
+
+8.  Some people have asked about binding all of the keys in a PC-keyboard-
+    style numeric keypad to readline functions.  Here's something I
+    received from the gnu-win32 list that may help.  Insert the following
+    lines into ~/.inputrc:
+
+# home key
+"\e[1~":beginning-of-line
+# insert key
+"\e[2~":kill-whole-line
+# del key
+"\e[3~":delete-char
+# end key
+"\e[4~":end-of-line
+# pgup key
+"\e[5~":history-search-forward
+# pgdn key
+"\e[6~":history-search-backward
+
+9.  Hints for building under Minix 2.0 (Contributed by Terry R. McConnell,
+    <tmc@barnyard.syr.edu>)
+
+   The version of /bin/sh distributed with Minix is not up to the job of
+   running the configure script. The easiest solution is to swap /bin/sh
+   with /usr/bin/ash. Then use chmem(1) to increase the memory allocated
+   to /bin/sh. The following settings are known to work:
+
+   text         data     bss   stack  memory
+   63552  9440          3304   65536  141832  /bin/sh
+
+   If you have problems with make or yacc it may be worthwhile first to
+   install the GNU versions of these utilities before attempting to build
+   bash. (As of this writing, all of these utilities are available for the
+   i386 as pre-built binaries via anonymous ftp at math.syr.edu in the
+   pub/mcconnell/minix directory. Note that the GNU version of yacc is called
+   bison.)
+
+   Unless you want to see lots of warnings about old-style declarations,
+   do LOCAL_CFLAGS=-wo; export LOCAL_CFLAGS before running configure.
+   (These warnings are harmless, but annoying.)
+
+   configure will insist that you supply a host type. For example, do
+   ./configure --host=i386-pc-minix.
+
+   Minix does not support the system calls required for a proper 
+   implementation of ulimit().  The `ulimit' builtin will not be available.
+
+   Configure will fail to notice that many things like uid_t are indeed
+   typedef'd in <sys/types.h>, because it uses egrep for this purpose
+   and minix has no egrep. You could try making a link /usr/bin/egrep -->
+   /usr/bin/grep. Better is to install the GNU version of grep in
+   /usr/local/bin and make the link /usr/local/bin/egrep -->/usr/local/bin/grep.
+   (These must be hard links, of course, since Minix does not support
+   symbolic links.)
+
+   You will see many warnings of the form:
+   warning: unknown s_type: 98
+   I have no idea what this means, but it doesn't seem to matter.
+
+10. If you do not have /usr/ccs/bin in your PATH when building on SunOS 5.x
+    (Solaris 2), the configure script will be unable to find `ar' and
+    `ranlib' (of course, ranlib is unnecessary).  Make sure your $PATH
+    includes /usr/ccs/bin on SunOS 5.x.  This generally manifests itself
+    with libraries not being built and make reporting errors like
+    `cr: not found' when library construction is attempted.
+
+11. Building a statically-linked bash on Solaris 2.5.x, 2.6, 7, or 8 is
+    complicated.
+
+    It's not possible to build a completely statically-linked binary, since
+    part of the C library depends on dynamic linking.  The following recipe
+    assumes that you're using gcc and the Solaris ld (/usr/ccs/bin/ld) on
+    Solaris 2.5.x or 2.6:
+
+	configure --enable-static-link
+	make STATIC_LD= LOCAL_LIBS='-Wl,-B,dynamic -ldl -Wl,-B,static'
+
+    This should result in a bash binary that depends only on libdl.so:
+
+	thor(2)$ ldd bash
+	        libdl.so.1 =>    /usr/lib/libdl.so.1
+
+    If you're using the Sun C Compiler (Sun WorkShop C Compiler version
+    4.2 was what I used), you should be able to get away with using
+
+	configure --enable-static-link
+	make STATIC_LD=  LOCAL_LIBS='-B dynamic -ldl -B static'
+
+    If you want to completely remove any dependence on /usr, perhaps
+    to put a copy of bash in /sbin and have it available when /usr is
+    not mounted, force the build process to use the shared dl.so library
+    in /etc/lib.
+
+    For gcc, this would be something like
+
+	configure --enable-static-link
+	make STATIC_LD= LOCAL_LIBS='-Wl,-B,dynamic -Wl,-R/etc/lib -ldl -Wl,-B,static'
+
+    For Sun's WS4.2 cc
+
+	configure --enable-static-link
+	make STATIC_LD=  LOCAL_LIBS='-B dynamic -R/etc/lib -ldl -B static'
+
+    seems to work, at least on Solaris 2.5.1:
+
+	thor(2)$ ldd bash
+	        libdl.so.1 =>    /etc/lib/libdl.so.1
+
+    On Solaris 7 (Solaris 8, using the version of gcc on the free software
+    CD-ROM), the following recipe appears to work for gcc:
+
+	configure --enable-static-link
+	make STATIC_LD='-Wl,-Bstatic' LOCAL_LIBS='-Wl,-Bdynamic -Wl,-R/etc/lib -ldl -Wl,-Bstatic'
+
+	thor.ins.cwru.edu(2)$ ldd bash
+	        libdl.so.1 =>    /etc/lib/libdl.so.1
+
+    Make the analogous changes if you are running Sun's C Compiler.
+
+    I have received word that adding -L/etc/lib (or the equivalent
+    -Wl,-L/etc/lib) might also be necessary, in addition to the -R/etc/lib.
+
+    On later versions of Solaris, it may be necessary to add -lnsl before
+    -ldl; statically-linked versions of bash using libnsl are not guaranteed
+    to work correctly on future versions of Solaris.
+
+12. Configuring bash to build it in a cross environment.  Currently only
+    two native versions can be compiled this way, cygwin32 and x86 BeOS.
+    For BeOS, you would configure it like this:
+
+	export RANLIB=i586-beos-ranlib
+	export AR=i586-beos-ar
+	export CC=i586-beos-gcc
+	configure i586-beos
+
+    Similarly for cygwin32.
+
+13. Bash-2.05 has reverted to the bash-2.03 behavior of honoring the current
+    locale setting when processing ranges within pattern matching bracket
+    expressions ([A-Z]).  This is what POSIX.2 and SUSv2 specify.
+
+    The behavior of the matcher in bash-2.05 depends on the current LC_COLLATE
+    setting.  Setting this variable to `C' or `POSIX' will result in the
+    traditional behavior ([A-Z] matches all uppercase ASCII characters).
+    Many other locales, including the en_US locale (the default on many US
+    versions of Linux) collate the upper and lower case letters like this:
+
+	AaBb...Zz
+
+    which means that [A-Z] matches every letter except `z'.
+
+    The portable way to specify upper case letters is [:upper:] instead of
+    A-Z; lower case may be specified as [:lower:] instead of a-z.
+
+    Look at the manual pages for setlocale(3), strcoll(3), and, if it is
+    present, locale(1).  If you have locale(1), you can use it to find
+    your current locale information even if you do not have any of the
+    LC_ variables set.
+
+    My advice is to put
+
+        export LC_COLLATE=C
+
+    into /etc/profile and inspect any shell scripts run from cron for
+    constructs like [A-Z].  This will prevent things like
+
+	rm [A-Z]*
+
+    from removing every file in the current directory except those beginning
+    with `z' and still allow individual users to change the collation order.
+    Users may put the above command into their own profiles as well, of course.
+
+14. Building on Interix (nee OpenNT), which Microsoft bought from Softway
+    Systems and has seemingly abandoned (thanks to Kevin Moore for this item).
+
+	1.  cp cross-build/opennt.cache config.cache
+
+	2.  If desired, edit pathnames.h to set the values of SYS_PROFILE and
+	    DEFAULT_HOSTS_FILE appropriately.
+
+	3.  export CONFIG_SHELL=$INTERIX_ROOT/bin/sh
+
+	4.  ./configure --prefix=$INTERIX_ROOT/usr/local (or wherever you
+	    want it).
+
+	5. make; make install; enjoy
+
+15.  Configure with `CC=xlc' if you don't have gcc on AIX 4.2 and later
+     versions.  `xlc' running in `cc' mode has trouble compiling error.c.
+
+16.  Configure --disable-multibyte on NetBSD versions (1.4 through at least
+     1.6.1) that include wctype.h but do not define wctype_t.
+
+17.  Do NOT use bison-1.75.  It builds a non-working parser.  The most
+     obvious effect is that constructs like "for i; do echo $i; done" don't
+     loop over the positional parameters.
+
+18.  I have received reports that using -O2 with the MIPSpro results in a
+     binary that fails in strange ways.  Using -O1 seems to work.
+
+19.  There is special handling to ensure the shell links against static
+     versions of the included readline and history libraries on Mac OS X;
+     Apple ships inadequate dynamic libreadline and libhistory "replacements"
+     as standard libraries.
+
+20.  If you're on a system like SGI Irix, and you get an error about not
+     being able to refer to a dynamic symbol
+     (ld: non-dynamic relocations refer to dynamic symbol PC), add
+     -DNEED_EXTERN_PC to the LOCAL_CFLAGS variable in lib/readline/Makefile.in
+     and rebuild.
diff --git a/POSIX b/POSIX
new file mode 100644
index 0000000..24114af
--- /dev/null
+++ b/POSIX
@@ -0,0 +1,248 @@
+6.11 Bash POSIX Mode
+====================
+
+Starting Bash with the '--posix' command-line option or executing 'set
+-o posix' while Bash is running will cause Bash to conform more closely
+to the POSIX standard by changing the behavior to match that specified
+by POSIX in areas where the Bash default differs.
+
+When invoked as 'sh', Bash enters POSIX mode after reading the startup
+files.
+
+The following list is what's changed when 'POSIX mode' is in effect:
+
+  1. Bash ensures that the 'POSIXLY_CORRECT' variable is set.
+
+  2. When a command in the hash table no longer exists, Bash will
+     re-search '$PATH' to find the new location.  This is also available
+     with 'shopt -s checkhash'.
+
+  3. Bash will not insert a command without the execute bit set into the
+     command hash table, even if it returns it as a (last-ditch) result
+     from a '$PATH' search.
+
+  4. The message printed by the job control code and builtins when a job
+     exits with a non-zero status is 'Done(status)'.
+
+  5. The message printed by the job control code and builtins when a job
+     is stopped is 'Stopped(SIGNAME)', where SIGNAME is, for example,
+     'SIGTSTP'.
+
+  6. Alias expansion is always enabled, even in non-interactive shells.
+
+  7. Reserved words appearing in a context where reserved words are
+     recognized do not undergo alias expansion.
+
+  8. The POSIX 'PS1' and 'PS2' expansions of '!' to the history number
+     and '!!' to '!' are enabled, and parameter expansion is performed
+     on the values of 'PS1' and 'PS2' regardless of the setting of the
+     'promptvars' option.
+
+  9. The POSIX startup files are executed ('$ENV') rather than the
+     normal Bash files.
+
+  10. Tilde expansion is only performed on assignments preceding a
+     command name, rather than on all assignment statements on the line.
+
+  11. The default history file is '~/.sh_history' (this is the default
+     value of '$HISTFILE').
+
+  12. Redirection operators do not perform filename expansion on the
+     word in the redirection unless the shell is interactive.
+
+  13. Redirection operators do not perform word splitting on the word in
+     the redirection.
+
+  14. Function names must be valid shell 'name's.  That is, they may not
+     contain characters other than letters, digits, and underscores, and
+     may not start with a digit.  Declaring a function with an invalid
+     name causes a fatal syntax error in non-interactive shells.
+
+  15. Function names may not be the same as one of the POSIX special
+     builtins.
+
+  16. POSIX special builtins are found before shell functions during
+     command lookup.
+
+  17. When printing shell function definitions (e.g., by 'type'), Bash
+     does not print the 'function' keyword.
+
+  18. Literal tildes that appear as the first character in elements of
+     the 'PATH' variable are not expanded as described above under *note
+     Tilde Expansion::.
+
+  19. The 'time' reserved word may be used by itself as a command.  When
+     used in this way, it displays timing statistics for the shell and
+     its completed children.  The 'TIMEFORMAT' variable controls the
+     format of the timing information.
+
+  20. When parsing and expanding a ${...} expansion that appears within
+     double quotes, single quotes are no longer special and cannot be
+     used to quote a closing brace or other special character, unless
+     the operator is one of those defined to perform pattern removal.
+     In this case, they do not have to appear as matched pairs.
+
+  21. The parser does not recognize 'time' as a reserved word if the
+     next token begins with a '-'.
+
+  22. The '!' character does not introduce history expansion within a
+     double-quoted string, even if the 'histexpand' option is enabled.
+
+  23. If a POSIX special builtin returns an error status, a
+     non-interactive shell exits.  The fatal errors are those listed in
+     the POSIX standard, and include things like passing incorrect
+     options, redirection errors, variable assignment errors for
+     assignments preceding the command name, and so on.
+
+  24. A non-interactive shell exits with an error status if a variable
+     assignment error occurs when no command name follows the assignment
+     statements.  A variable assignment error occurs, for example, when
+     trying to assign a value to a readonly variable.
+
+  25. A non-interactive shell exits with an error status if a variable
+     assignment error occurs in an assignment statement preceding a
+     special builtin, but not with any other simple command.
+
+  26. A non-interactive shell exits with an error status if the
+     iteration variable in a 'for' statement or the selection variable
+     in a 'select' statement is a readonly variable.
+
+  27. Non-interactive shells exit if FILENAME in '.'  FILENAME is not
+     found.
+
+  28. Non-interactive shells exit if a syntax error in an arithmetic
+     expansion results in an invalid expression.
+
+  29. Non-interactive shells exit if a parameter expansion error occurs.
+
+  30. Non-interactive shells exit if there is a syntax error in a script
+     read with the '.' or 'source' builtins, or in a string processed by
+     the 'eval' builtin.
+
+  31. While variable indirection is available, it may not be applied to
+     the '#' and '?' special parameters.
+
+  32. When expanding the '*' special parameter in a pattern context
+     where the expansion is double-quoted does not treat the '$*' as if
+     it were double-quoted.
+
+  33. Assignment statements preceding POSIX special builtins persist in
+     the shell environment after the builtin completes.
+
+  34. The 'command' builtin does not prevent builtins that take
+     assignment statements as arguments from expanding them as
+     assignment statements; when not in POSIX mode, assignment builtins
+     lose their assignment statement expansion properties when preceded
+     by 'command'.
+
+  35. The 'bg' builtin uses the required format to describe each job
+     placed in the background, which does not include an indication of
+     whether the job is the current or previous job.
+
+  36. The output of 'kill -l' prints all the signal names on a single
+     line, separated by spaces, without the 'SIG' prefix.
+
+  37. The 'kill' builtin does not accept signal names with a 'SIG'
+     prefix.
+
+  38. The 'export' and 'readonly' builtin commands display their output
+     in the format required by POSIX.
+
+  39. The 'trap' builtin displays signal names without the leading
+     'SIG'.
+
+  40. The 'trap' builtin doesn't check the first argument for a possible
+     signal specification and revert the signal handling to the original
+     disposition if it is, unless that argument consists solely of
+     digits and is a valid signal number.  If users want to reset the
+     handler for a given signal to the original disposition, they should
+     use '-' as the first argument.
+
+  41. 'trap -p' displays signals whose dispositions are set to SIG_DFL
+     and those that were ignored when the shell started.
+
+  42. The '.' and 'source' builtins do not search the current directory
+     for the filename argument if it is not found by searching 'PATH'.
+
+  43. Enabling POSIX mode has the effect of setting the
+     'inherit_errexit' option, so subshells spawned to execute command
+     substitutions inherit the value of the '-e' option from the parent
+     shell.  When the 'inherit_errexit' option is not enabled, Bash
+     clears the '-e' option in such subshells.
+
+  44. Enabling POSIX mode has the effect of setting the 'shift_verbose'
+     option, so numeric arguments to 'shift' that exceed the number of
+     positional parameters will result in an error message.
+
+  45. When the 'alias' builtin displays alias definitions, it does not
+     display them with a leading 'alias ' unless the '-p' option is
+     supplied.
+
+  46. When the 'set' builtin is invoked without options, it does not
+     display shell function names and definitions.
+
+  47. When the 'set' builtin is invoked without options, it displays
+     variable values without quotes, unless they contain shell
+     metacharacters, even if the result contains nonprinting characters.
+
+  48. When the 'cd' builtin is invoked in LOGICAL mode, and the pathname
+     constructed from '$PWD' and the directory name supplied as an
+     argument does not refer to an existing directory, 'cd' will fail
+     instead of falling back to PHYSICAL mode.
+
+  49. When the 'cd' builtin cannot change a directory because the length
+     of the pathname constructed from '$PWD' and the directory name
+     supplied as an argument exceeds PATH_MAX when all symbolic links
+     are expanded, 'cd' will fail instead of attempting to use only the
+     supplied directory name.
+
+  50. The 'pwd' builtin verifies that the value it prints is the same as
+     the current directory, even if it is not asked to check the file
+     system with the '-P' option.
+
+  51. When listing the history, the 'fc' builtin does not include an
+     indication of whether or not a history entry has been modified.
+
+  52. The default editor used by 'fc' is 'ed'.
+
+  53. The 'type' and 'command' builtins will not report a non-executable
+     file as having been found, though the shell will attempt to execute
+     such a file if it is the only so-named file found in '$PATH'.
+
+  54. The 'vi' editing mode will invoke the 'vi' editor directly when
+     the 'v' command is run, instead of checking '$VISUAL' and
+     '$EDITOR'.
+
+  55. When the 'xpg_echo' option is enabled, Bash does not attempt to
+     interpret any arguments to 'echo' as options.  Each argument is
+     displayed, after escape characters are converted.
+
+  56. The 'ulimit' builtin uses a block size of 512 bytes for the '-c'
+     and '-f' options.
+
+  57. The arrival of 'SIGCHLD' when a trap is set on 'SIGCHLD' does not
+     interrupt the 'wait' builtin and cause it to return immediately.
+     The trap command is run once for each child that exits.
+
+  58. The 'read' builtin may be interrupted by a signal for which a trap
+     has been set.  If Bash receives a trapped signal while executing
+     'read', the trap handler executes and 'read' returns an exit status
+     greater than 128.
+
+  59. Bash removes an exited background process's status from the list
+     of such statuses after the 'wait' builtin is used to obtain it.
+
+There is other POSIX behavior that Bash does not implement by default
+even when in POSIX mode.  Specifically:
+
+  1. The 'fc' builtin checks '$EDITOR' as a program to edit history
+     entries if 'FCEDIT' is unset, rather than defaulting directly to
+     'ed'.  'fc' uses 'ed' if 'EDITOR' is unset.
+
+  2. As noted above, Bash requires the 'xpg_echo' option to be enabled
+     for the 'echo' builtin to be fully conformant.
+
+Bash can be configured to be POSIX-conformant by default, by specifying
+the '--enable-strict-posix-default' to 'configure' when building (*note
+Optional Features::).
+
diff --git a/RBASH b/RBASH
new file mode 100644
index 0000000..9732c76
--- /dev/null
+++ b/RBASH
@@ -0,0 +1,51 @@
+6.10 The Restricted Shell
+=========================
+
+If Bash is started with the name 'rbash', or the '--restricted' or '-r'
+option is supplied at invocation, the shell becomes restricted.  A
+restricted shell is used to set up an environment more controlled than
+the standard shell.  A restricted shell behaves identically to 'bash'
+with the exception that the following are disallowed or not performed:
+
+   * Changing directories with the 'cd' builtin.
+   * Setting or unsetting the values of the 'SHELL', 'PATH', 'HISTFILE',
+     'ENV', or 'BASH_ENV' variables.
+   * Specifying command names containing slashes.
+   * Specifying a filename containing a slash as an argument to the '.'
+     builtin command.
+   * Specifying a filename containing a slash as an argument to the
+     'history' builtin command.
+   * Specifying a filename containing a slash as an argument to the '-p'
+     option to the 'hash' builtin command.
+   * Importing function definitions from the shell environment at
+     startup.
+   * Parsing the value of 'SHELLOPTS' from the shell environment at
+     startup.
+   * Redirecting output using the '>', '>|', '<>', '>&', '&>', and '>>'
+     redirection operators.
+   * Using the 'exec' builtin to replace the shell with another command.
+   * Adding or deleting builtin commands with the '-f' and '-d' options
+     to the 'enable' builtin.
+   * Using the 'enable' builtin command to enable disabled shell
+     builtins.
+   * Specifying the '-p' option to the 'command' builtin.
+   * Turning off restricted mode with 'set +r' or 'set +o restricted'.
+
+These restrictions are enforced after any startup files are read.
+
+When a command that is found to be a shell script is executed (*note
+Shell Scripts::), 'rbash' turns off any restrictions in the shell
+spawned to execute the script.
+
+The restricted shell mode is only one component of a useful restricted
+environment.  It should be accompanied by setting 'PATH' to a value that
+allows execution of only a few verified commands (commands that allow
+shell escapes are particularly vulnerable), leaving the user in a
+non-writable directory other than his home directory after login, not
+allowing the restricted shell to execute shell scripts, and cleaning the
+environment of variables that cause some commands to modify their
+behavior (e.g., 'VISUAL' or 'PAGER').
+
+Modern systems provide more secure ways to implement a restricted
+environment, such as 'jails', 'zones', or 'containers'.
+
diff --git a/README b/README
new file mode 100644
index 0000000..70b7a85
--- /dev/null
+++ b/README
@@ -0,0 +1,111 @@
+Introduction
+============
+
+This is GNU Bash, version 5.1.  Bash is the GNU Project's Bourne
+Again SHell, a complete implementation of the POSIX shell spec,
+but also with interactive command line editing, job control on
+architectures that support it, csh-like features such as history
+substitution and brace expansion, and a slew of other features. 
+For more information on the features of Bash that are new to this
+type of shell, see the file `doc/bashref.texi'.  There is also a
+large Unix-style man page.  The man page is the definitive description
+of the shell's features. 
+
+See the file POSIX for a discussion of how the Bash defaults differ
+from the POSIX spec and a description of the Bash `posix mode'.
+
+There are some user-visible incompatibilities between this version
+of Bash and previous widely-distributed versions, bash-4.4 and
+bash-5.0.  For details, see the file COMPAT.  The NEWS file tersely
+lists features that are new in this release. 
+
+Bash is free software, distributed under the terms of the [GNU] General
+Public License as published by the Free Software Foundation,
+version 3 of the License (or any later version).  For more information,
+see the file COPYING. 
+
+A number of frequently-asked questions are answered in the file
+`doc/FAQ'.
+
+To compile Bash, type `./configure', then `make'.  Bash auto-configures
+the build process, so no further intervention should be necessary.  Bash
+builds with `gcc' by default if it is available.  If you want to use `cc'
+instead, type
+
+	CC=cc ./configure
+
+if you are using a Bourne-style shell.  If you are not, the following
+may work:
+
+	env CC=cc ./configure
+
+Read the file INSTALL in this directory for more information about how
+to customize and control the build process.  The file NOTES contains
+platform-specific installation and configuration information.
+
+If you are a csh user and wish to convert your csh aliases to Bash
+aliases, you may wish to use the script `examples/misc/alias-conv.sh'
+as a starting point.  The script `examples/misc/cshtobash' is a
+more ambitious script that attempts to do a more complete job.
+
+Reporting Bugs
+==============
+
+Bug reports for bash should be sent to:
+
+	bug-bash@gnu.org
+
+using the `bashbug' program that is built and installed at the same
+time as bash.
+
+The discussion list `bug-bash@gnu.org' often contains information
+about new ports of Bash, or discussions of new features or behavior
+changes that people would like.  This mailing list is also available
+as a usenet newsgroup: gnu.bash.bug. 
+
+When you send a bug report, please use the `bashbug' program that is
+built at the same time as bash.  If bash fails to build, try building
+bashbug directly with `make bashbug'.  If you cannot build `bashbug',
+please send mail to bug-bash@gnu.org with the following information:
+
+	* the version number and release status of Bash (e.g., 2.05a-release)
+	* the machine and OS that it is running on (you may run
+	  `bashversion -l' from the bash build directory for this information)
+	* a list of the compilation flags or the contents of `config.h', if
+	  appropriate
+	* a description of the bug
+	* a recipe for recreating the bug reliably
+	* a fix for the bug if you have one!
+
+The `bashbug' program includes much of this automatically.
+
+Questions and requests for help with bash and bash programming may be
+sent to the help-bash@gnu.org mailing list.
+
+If you would like to contact the Bash maintainers directly, send mail
+to bash-maintainers@gnu.org.
+
+While the Bash maintainers do not promise to fix all bugs, we would
+like this shell to be the best that we can make it.
+
+Other Packages
+==============
+
+This distribution includes, in examples/bash-completion, a recent version
+of the `bash-completion' package, which provides programmable completions
+for a number of commands. It's available as a package in many distributions,
+and that is the first place from which to obtain it. If it's not a package
+from your vendor, you may install the included version.
+
+The latest version of bash-completion is always available from
+https://github.com/scop/bash-completion.
+
+Enjoy!
+
+Chet Ramey
+chet.ramey@case.edu
+
+Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without any warranty.
diff --git a/Y2K b/Y2K
new file mode 100644
index 0000000..d12e352
--- /dev/null
+++ b/Y2K
@@ -0,0 +1,4 @@
+Since Bash does not manipulate date strings, it is Y2K-safe.
+
+The only thing that Bash does with date strings is manipulate the string
+returned by ctime(3) or strftime(3) in the prompt customization code.
diff --git a/aclocal.m4 b/aclocal.m4
new file mode 100644
index 0000000..6899e82
--- /dev/null
+++ b/aclocal.m4
@@ -0,0 +1,2302 @@
+dnl
+dnl Bash specific tests
+dnl
+dnl Some derived from PDKSH 5.1.3 autoconf tests
+dnl
+
+AC_DEFUN(BASH_C_LONG_LONG,
+[AC_CACHE_CHECK(for long long, ac_cv_c_long_long,
+[if test "$GCC" = yes; then
+  ac_cv_c_long_long=yes
+else
+AC_TRY_RUN([
+#include <stdlib.h>
+int
+main()
+{
+long long foo = 0;
+exit(sizeof(long long) < sizeof(long));
+}
+], ac_cv_c_long_long=yes, ac_cv_c_long_long=no)
+fi])
+if test $ac_cv_c_long_long = yes; then
+  AC_DEFINE(HAVE_LONG_LONG, 1, [Define if the `long long' type works.])
+fi
+])
+
+dnl
+dnl This is very similar to AC_C_LONG_DOUBLE, with the fix for IRIX
+dnl (< changed to <=) added.
+dnl
+AC_DEFUN(BASH_C_LONG_DOUBLE,
+[AC_CACHE_CHECK(for long double, ac_cv_c_long_double,
+[if test "$GCC" = yes; then
+  ac_cv_c_long_double=yes
+else
+AC_TRY_RUN([
+#include <stdlib.h>
+int
+main()
+{
+  /* The Stardent Vistra knows sizeof(long double), but does not
+     support it. */
+  long double foo = 0.0;
+  /* On Ultrix 4.3 cc, long double is 4 and double is 8.  */
+  /* On IRIX 5.3, the compiler converts long double to double with a warning,
+     but compiles this successfully. */
+  exit(sizeof(long double) <= sizeof(double));
+}
+], ac_cv_c_long_double=yes, ac_cv_c_long_double=no)
+fi])
+if test $ac_cv_c_long_double = yes; then
+  AC_DEFINE(HAVE_LONG_DOUBLE, 1, [Define if the `long double' type works.])
+fi
+])
+
+dnl
+dnl Check for <inttypes.h>.  This is separated out so that it can be
+dnl AC_REQUIREd.
+dnl
+dnl BASH_HEADER_INTTYPES
+AC_DEFUN(BASH_HEADER_INTTYPES,
+[
+ AC_CHECK_HEADERS(inttypes.h)
+])
+
+dnl
+dnl check for typedef'd symbols in header files, but allow the caller to
+dnl specify the include files to be checked in addition to the default
+dnl
+dnl This could be changed to use AC_COMPILE_IFELSE instead of AC_EGREP_CPP
+dnl 
+dnl BASH_CHECK_TYPE(TYPE, HEADERS, DEFAULT[, VALUE-IF-FOUND])
+AC_DEFUN(BASH_CHECK_TYPE,
+[
+AC_REQUIRE([AC_HEADER_STDC])dnl
+AC_REQUIRE([BASH_HEADER_INTTYPES])
+AC_MSG_CHECKING(for $1)
+AC_CACHE_VAL(bash_cv_type_$1,
+[AC_EGREP_CPP($1, [#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+#if HAVE_INTTYPES_H
+#include <inttypes.h>
+#endif
+#if HAVE_STDINT_H
+#include <stdint.h>
+#endif
+$2
+], bash_cv_type_$1=yes, bash_cv_type_$1=no)])
+AC_MSG_RESULT($bash_cv_type_$1)
+ifelse($#, 4, [if test $bash_cv_type_$1 = yes; then
+	AC_DEFINE($4)
+	fi])
+if test $bash_cv_type_$1 = no; then
+  AC_DEFINE_UNQUOTED($1, $3)
+fi
+])
+
+dnl
+dnl BASH_CHECK_DECL(FUNC)
+dnl
+dnl Check for a declaration of FUNC in stdlib.h and inttypes.h like
+dnl AC_CHECK_DECL
+dnl
+AC_DEFUN(BASH_CHECK_DECL,
+[
+AC_REQUIRE([AC_HEADER_STDC])
+AC_REQUIRE([BASH_HEADER_INTTYPES])
+AC_CACHE_CHECK([for declaration of $1], bash_cv_decl_$1,
+[AC_TRY_LINK(
+[
+#if STDC_HEADERS
+#  include <stdlib.h>
+#endif
+#if HAVE_INTTYPES_H
+#  include <inttypes.h>
+#endif
+],
+[return !$1;],
+bash_cv_decl_$1=yes, bash_cv_decl_$1=no)])
+bash_tr_func=HAVE_DECL_`echo $1 | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+if test $bash_cv_decl_$1 = yes; then
+  AC_DEFINE_UNQUOTED($bash_tr_func, 1)
+else
+  AC_DEFINE_UNQUOTED($bash_tr_func, 0)
+fi
+])
+
+AC_DEFUN(BASH_DECL_PRINTF,
+[AC_MSG_CHECKING(for declaration of printf in <stdio.h>)
+AC_CACHE_VAL(bash_cv_printf_declared,
+[AC_TRY_RUN([
+#include <stdio.h>
+#ifdef __STDC__
+typedef int (*_bashfunc)(const char *, ...);
+#else
+typedef int (*_bashfunc)();
+#endif
+#include <stdlib.h>
+int
+main()
+{
+_bashfunc pf;
+pf = (_bashfunc) printf;
+exit(pf == 0);
+}
+], bash_cv_printf_declared=yes, bash_cv_printf_declared=no,
+   [AC_MSG_WARN(cannot check printf declaration if cross compiling -- defaulting to yes)
+    bash_cv_printf_declared=yes]
+)])
+AC_MSG_RESULT($bash_cv_printf_declared)
+if test $bash_cv_printf_declared = yes; then
+AC_DEFINE(PRINTF_DECLARED)
+fi
+])
+
+AC_DEFUN(BASH_DECL_SBRK,
+[AC_MSG_CHECKING(for declaration of sbrk in <unistd.h>)
+AC_CACHE_VAL(bash_cv_sbrk_declared,
+[AC_EGREP_HEADER(sbrk, unistd.h,
+ bash_cv_sbrk_declared=yes, bash_cv_sbrk_declared=no)])
+AC_MSG_RESULT($bash_cv_sbrk_declared)
+if test $bash_cv_sbrk_declared = yes; then
+AC_DEFINE(SBRK_DECLARED)
+fi
+])
+
+dnl
+dnl Check for sys_siglist[] or _sys_siglist[]
+dnl
+AC_DEFUN(BASH_DECL_UNDER_SYS_SIGLIST,
+[AC_MSG_CHECKING([for _sys_siglist in signal.h or unistd.h])
+AC_CACHE_VAL(bash_cv_decl_under_sys_siglist,
+[AC_TRY_COMPILE([
+#include <sys/types.h>
+#include <signal.h>
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif], [ char *msg = _sys_siglist[2]; ],
+  bash_cv_decl_under_sys_siglist=yes, bash_cv_decl_under_sys_siglist=no,
+  [AC_MSG_WARN(cannot check for _sys_siglist[] if cross compiling -- defaulting to no)])])dnl
+AC_MSG_RESULT($bash_cv_decl_under_sys_siglist)
+if test $bash_cv_decl_under_sys_siglist = yes; then
+AC_DEFINE(UNDER_SYS_SIGLIST_DECLARED)
+fi
+])
+
+AC_DEFUN(BASH_UNDER_SYS_SIGLIST,
+[AC_REQUIRE([BASH_DECL_UNDER_SYS_SIGLIST])
+AC_MSG_CHECKING([for _sys_siglist in system C library])
+AC_CACHE_VAL(bash_cv_under_sys_siglist,
+[AC_TRY_RUN([
+#include <sys/types.h>
+#include <signal.h>
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#include <stdlib.h>
+#ifndef UNDER_SYS_SIGLIST_DECLARED
+extern char *_sys_siglist[];
+#endif
+int
+main()
+{
+char *msg = (char *)_sys_siglist[2];
+exit(msg == 0);
+}],
+	bash_cv_under_sys_siglist=yes, bash_cv_under_sys_siglist=no,
+	[AC_MSG_WARN(cannot check for _sys_siglist[] if cross compiling -- defaulting to no)
+	 bash_cv_under_sys_siglist=no])])
+AC_MSG_RESULT($bash_cv_under_sys_siglist)
+if test $bash_cv_under_sys_siglist = yes; then
+AC_DEFINE(HAVE_UNDER_SYS_SIGLIST)
+fi
+])
+
+AC_DEFUN(BASH_SYS_SIGLIST,
+[AC_REQUIRE([AC_DECL_SYS_SIGLIST])
+AC_MSG_CHECKING([for sys_siglist in system C library])
+AC_CACHE_VAL(bash_cv_sys_siglist,
+[AC_TRY_RUN([
+#include <sys/types.h>
+#include <signal.h>
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#include <stdlib.h>
+#if !HAVE_DECL_SYS_SIGLIST
+extern char *sys_siglist[];
+#endif
+int
+main()
+{
+char *msg = sys_siglist[2];
+exit(msg == 0);
+}],
+	bash_cv_sys_siglist=yes, bash_cv_sys_siglist=no,
+	[AC_MSG_WARN(cannot check for sys_siglist if cross compiling -- defaulting to no)
+	 bash_cv_sys_siglist=no])])
+AC_MSG_RESULT($bash_cv_sys_siglist)
+if test $bash_cv_sys_siglist = yes; then
+AC_DEFINE(HAVE_SYS_SIGLIST)
+fi
+])
+
+dnl Check for the various permutations of sys_siglist and make sure we
+dnl compile in siglist.o if they're not defined
+AC_DEFUN(BASH_CHECK_SYS_SIGLIST, [
+AC_REQUIRE([BASH_SYS_SIGLIST])
+AC_REQUIRE([BASH_DECL_UNDER_SYS_SIGLIST])
+AC_REQUIRE([BASH_FUNC_STRSIGNAL])
+if test "$bash_cv_sys_siglist" = no && test "$bash_cv_under_sys_siglist" = no && test "$bash_cv_have_strsignal" = no; then
+  SIGLIST_O=siglist.o
+else
+  SIGLIST_O=
+fi
+AC_SUBST([SIGLIST_O])
+])
+
+dnl Check for sys_errlist[] and sys_nerr, check for declaration
+AC_DEFUN(BASH_SYS_ERRLIST,
+[AC_MSG_CHECKING([for sys_errlist and sys_nerr])
+AC_CACHE_VAL(bash_cv_sys_errlist,
+[AC_TRY_LINK([#include <errno.h>],
+[extern char *sys_errlist[];
+ extern int sys_nerr;
+ char *msg = sys_errlist[sys_nerr - 1];],
+    bash_cv_sys_errlist=yes, bash_cv_sys_errlist=no)])dnl
+AC_MSG_RESULT($bash_cv_sys_errlist)
+if test $bash_cv_sys_errlist = yes; then
+AC_DEFINE(HAVE_SYS_ERRLIST)
+fi
+])
+
+dnl
+dnl Check if dup2() does not clear the close on exec flag
+dnl
+AC_DEFUN(BASH_FUNC_DUP2_CLOEXEC_CHECK,
+[AC_MSG_CHECKING(if dup2 fails to clear the close-on-exec flag)
+AC_CACHE_VAL(bash_cv_dup2_broken,
+[AC_TRY_RUN([
+#include <sys/types.h>
+#include <fcntl.h>
+#include <stdlib.h>
+int
+main()
+{
+  int fd1, fd2, fl;
+  fd1 = open("/dev/null", 2);
+  if (fcntl(fd1, 2, 1) < 0)
+    exit(1);
+  fd2 = dup2(fd1, 1);
+  if (fd2 < 0)
+    exit(2);
+  fl = fcntl(fd2, 1, 0);
+  /* fl will be 1 if dup2 did not reset the close-on-exec flag. */
+  exit(fl != 1);
+}
+], bash_cv_dup2_broken=yes, bash_cv_dup2_broken=no,
+    [AC_MSG_WARN(cannot check dup2 if cross compiling -- defaulting to no)
+     bash_cv_dup2_broken=no])
+])
+AC_MSG_RESULT($bash_cv_dup2_broken)
+if test $bash_cv_dup2_broken = yes; then
+AC_DEFINE(DUP2_BROKEN)
+fi
+])
+
+AC_DEFUN(BASH_FUNC_STRSIGNAL,
+[AC_MSG_CHECKING([for the existence of strsignal])
+AC_CACHE_VAL(bash_cv_have_strsignal,
+[AC_TRY_LINK([#include <sys/types.h>
+#include <signal.h>
+#include <string.h>],
+[char *s = (char *)strsignal(2);],
+ bash_cv_have_strsignal=yes, bash_cv_have_strsignal=no)])
+AC_MSG_RESULT($bash_cv_have_strsignal)
+if test $bash_cv_have_strsignal = yes; then
+AC_DEFINE(HAVE_STRSIGNAL)
+fi
+])
+
+dnl Check to see if opendir will open non-directories (not a nice thing)
+AC_DEFUN(BASH_FUNC_OPENDIR_CHECK,
+[AC_REQUIRE([AC_HEADER_DIRENT])dnl
+AC_MSG_CHECKING(if opendir() opens non-directories)
+AC_CACHE_VAL(bash_cv_opendir_not_robust,
+[AC_TRY_RUN([
+#include <stdio.h>
+#include <sys/types.h>
+#include <fcntl.h>
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif /* HAVE_UNISTD_H */
+#ifdef HAVE_SYS_STAT_H
+#include <sys/stat.h>
+#endif
+#if defined(HAVE_DIRENT_H)
+# include <dirent.h>
+#else
+# define dirent direct
+# ifdef HAVE_SYS_NDIR_H
+#  include <sys/ndir.h>
+# endif /* SYSNDIR */
+# ifdef HAVE_SYS_DIR_H
+#  include <sys/dir.h>
+# endif /* SYSDIR */
+# ifdef HAVE_NDIR_H
+#  include <ndir.h>
+# endif
+#endif /* HAVE_DIRENT_H */
+#include <stdlib.h>
+int
+main()
+{
+DIR *dir;
+int fd, err;
+err = mkdir("bash-aclocal", 0700);
+if (err < 0) {
+  perror("mkdir");
+  exit(1);
+}
+unlink("bash-aclocal/not_a_directory");
+fd = open("bash-aclocal/not_a_directory", O_WRONLY|O_CREAT|O_EXCL, 0666);
+write(fd, "\n", 1);
+close(fd);
+dir = opendir("bash-aclocal/not_a_directory");
+unlink("bash-aclocal/not_a_directory");
+rmdir("bash-aclocal");
+exit (dir == 0);
+}], bash_cv_opendir_not_robust=yes,bash_cv_opendir_not_robust=no,
+    [AC_MSG_WARN(cannot check opendir if cross compiling -- defaulting to no)
+     bash_cv_opendir_not_robust=no]
+)])
+AC_MSG_RESULT($bash_cv_opendir_not_robust)
+if test $bash_cv_opendir_not_robust = yes; then
+AC_DEFINE(OPENDIR_NOT_ROBUST)
+fi
+])
+
+dnl
+AC_DEFUN(BASH_TYPE_SIGHANDLER,
+[AC_MSG_CHECKING([whether signal handlers are of type void])
+AC_CACHE_VAL(bash_cv_void_sighandler,
+[AC_TRY_COMPILE([#include <sys/types.h>
+#include <signal.h>
+#ifdef signal
+#undef signal
+#endif
+#ifdef __cplusplus
+extern "C"
+#endif
+void (*signal ()) ();],
+[int i;], bash_cv_void_sighandler=yes, bash_cv_void_sighandler=no)])dnl
+AC_MSG_RESULT($bash_cv_void_sighandler)
+if test $bash_cv_void_sighandler = yes; then
+AC_DEFINE(VOID_SIGHANDLER)
+fi
+])
+
+dnl
+dnl A signed 16-bit integer quantity
+dnl
+AC_DEFUN(BASH_TYPE_BITS16_T,
+[
+if test "$ac_cv_sizeof_short" = 2; then
+  AC_CHECK_TYPE(bits16_t, short)
+elif test "$ac_cv_sizeof_char" = 2; then
+  AC_CHECK_TYPE(bits16_t, char)
+else
+  AC_CHECK_TYPE(bits16_t, short)
+fi
+])
+
+dnl
+dnl An unsigned 16-bit integer quantity
+dnl
+AC_DEFUN(BASH_TYPE_U_BITS16_T,
+[
+if test "$ac_cv_sizeof_short" = 2; then
+  AC_CHECK_TYPE(u_bits16_t, unsigned short)
+elif test "$ac_cv_sizeof_char" = 2; then
+  AC_CHECK_TYPE(u_bits16_t, unsigned char)
+else
+  AC_CHECK_TYPE(u_bits16_t, unsigned short)
+fi
+])
+
+dnl
+dnl A signed 32-bit integer quantity
+dnl
+AC_DEFUN(BASH_TYPE_BITS32_T,
+[
+if test "$ac_cv_sizeof_int" = 4; then
+  AC_CHECK_TYPE(bits32_t, int)
+elif test "$ac_cv_sizeof_long" = 4; then
+  AC_CHECK_TYPE(bits32_t, long)
+else
+  AC_CHECK_TYPE(bits32_t, int)
+fi
+])
+
+dnl
+dnl An unsigned 32-bit integer quantity
+dnl
+AC_DEFUN(BASH_TYPE_U_BITS32_T,
+[
+if test "$ac_cv_sizeof_int" = 4; then
+  AC_CHECK_TYPE(u_bits32_t, unsigned int)
+elif test "$ac_cv_sizeof_long" = 4; then
+  AC_CHECK_TYPE(u_bits32_t, unsigned long)
+else
+  AC_CHECK_TYPE(u_bits32_t, unsigned int)
+fi
+])
+
+AC_DEFUN(BASH_TYPE_PTRDIFF_T,
+[
+if test "$ac_cv_sizeof_int" = "$ac_cv_sizeof_char_p"; then
+  AC_CHECK_TYPE(ptrdiff_t, int)
+elif test "$ac_cv_sizeof_long" = "$ac_cv_sizeof_char_p"; then
+  AC_CHECK_TYPE(ptrdiff_t, long)
+elif test "$ac_cv_type_long_long" = yes && test "$ac_cv_sizeof_long_long" = "$ac_cv_sizeof_char_p"; then
+  AC_CHECK_TYPE(ptrdiff_t, [long long])
+else
+  AC_CHECK_TYPE(ptrdiff_t, int)
+fi
+])
+
+dnl
+dnl A signed 64-bit quantity
+dnl
+AC_DEFUN(BASH_TYPE_BITS64_T,
+[
+if test "$ac_cv_sizeof_char_p" = 8; then
+  AC_CHECK_TYPE(bits64_t, char *)
+elif test "$ac_cv_sizeof_double" = 8; then
+  AC_CHECK_TYPE(bits64_t, double)
+elif test -n "$ac_cv_type_long_long" && test "$ac_cv_sizeof_long_long" = 8; then
+  AC_CHECK_TYPE(bits64_t, [long long])
+elif test "$ac_cv_sizeof_long" = 8; then
+  AC_CHECK_TYPE(bits64_t, long)
+else
+  AC_CHECK_TYPE(bits64_t, double)
+fi
+])
+
+AC_DEFUN(BASH_TYPE_LONG_LONG,
+[
+AC_CACHE_CHECK([for long long], bash_cv_type_long_long,
+[AC_TRY_LINK([
+long long ll = 1; int i = 63;],
+[
+long long llm = (long long) -1;
+return ll << i | ll >> i | llm / ll | llm % ll;
+], bash_cv_type_long_long='long long', bash_cv_type_long_long='long')])
+if test "$bash_cv_type_long_long" = 'long long'; then
+  AC_DEFINE(HAVE_LONG_LONG, 1)
+fi
+])
+
+AC_DEFUN(BASH_TYPE_UNSIGNED_LONG_LONG,
+[
+AC_CACHE_CHECK([for unsigned long long], bash_cv_type_unsigned_long_long,
+[AC_TRY_LINK([
+unsigned long long ull = 1; int i = 63;],
+[
+unsigned long long ullmax = (unsigned long long) -1;
+return ull << i | ull >> i | ullmax / ull | ullmax % ull;
+], bash_cv_type_unsigned_long_long='unsigned long long',
+   bash_cv_type_unsigned_long_long='unsigned long')])
+if test "$bash_cv_type_unsigned_long_long" = 'unsigned long long'; then
+  AC_DEFINE(HAVE_UNSIGNED_LONG_LONG, 1)
+fi
+])
+
+dnl
+dnl Type of struct rlimit fields: some systems (OSF/1, NetBSD, RISC/os 5.0)
+dnl have a rlim_t, others (4.4BSD based systems) use quad_t, others use
+dnl long and still others use int (HP-UX 9.01, SunOS 4.1.3).  To simplify
+dnl matters, this just checks for rlim_t, quad_t, or long.
+dnl
+AC_DEFUN(BASH_TYPE_RLIMIT,
+[AC_MSG_CHECKING(for size and type of struct rlimit fields)
+AC_CACHE_VAL(bash_cv_type_rlimit,
+[AC_TRY_COMPILE([#include <sys/types.h>
+#include <sys/resource.h>],
+[rlim_t xxx;], bash_cv_type_rlimit=rlim_t,[
+AC_TRY_RUN([
+#include <sys/types.h>
+#include <sys/time.h>
+#include <sys/resource.h>
+#include <stdlib.h>
+int
+main()
+{
+#ifdef HAVE_QUAD_T
+  struct rlimit rl;
+  if (sizeof(rl.rlim_cur) == sizeof(quad_t))
+    exit(0);
+#endif
+  exit(1);
+}], bash_cv_type_rlimit=quad_t, bash_cv_type_rlimit=long,
+        [AC_MSG_WARN(cannot check quad_t if cross compiling -- defaulting to long)
+         bash_cv_type_rlimit=long])])
+])
+AC_MSG_RESULT($bash_cv_type_rlimit)
+if test $bash_cv_type_rlimit = quad_t; then
+AC_DEFINE(RLIMTYPE, quad_t)
+elif test $bash_cv_type_rlimit = rlim_t; then
+AC_DEFINE(RLIMTYPE, rlim_t)
+fi
+])
+
+AC_DEFUN(BASH_TYPE_SIG_ATOMIC_T,
+[AC_CACHE_CHECK([for sig_atomic_t in signal.h], ac_cv_have_sig_atomic_t,
+[AC_TRY_LINK([
+#include <signal.h>
+],[ sig_atomic_t x; ],
+ac_cv_have_sig_atomic_t=yes, ac_cv_have_sig_atomic_t=no)])
+if test "$ac_cv_have_sig_atomic_t" = "no"
+then
+    AC_CHECK_TYPE(sig_atomic_t,int)
+fi
+])
+
+AC_DEFUN(BASH_FUNC_LSTAT,
+[dnl Cannot use AC_CHECK_FUNCS(lstat) because Linux defines lstat() as an
+dnl inline function in <sys/stat.h>.
+AC_CACHE_CHECK([for lstat], bash_cv_func_lstat,
+[AC_TRY_LINK([
+#include <sys/types.h>
+#include <sys/stat.h>
+],[ lstat(".",(struct stat *)0); ],
+bash_cv_func_lstat=yes, bash_cv_func_lstat=no)])
+if test $bash_cv_func_lstat = yes; then
+  AC_DEFINE(HAVE_LSTAT)
+fi
+])
+
+AC_DEFUN(BASH_FUNC_INET_ATON,
+[
+AC_CACHE_CHECK([for inet_aton], bash_cv_func_inet_aton,
+[AC_TRY_LINK([
+#include <sys/types.h>
+#include <netinet/in.h>
+#include <arpa/inet.h>
+struct in_addr ap;], [ inet_aton("127.0.0.1", &ap); ],
+bash_cv_func_inet_aton=yes, bash_cv_func_inet_aton=no)])
+if test $bash_cv_func_inet_aton = yes; then
+  AC_DEFINE(HAVE_INET_ATON)
+else
+  AC_LIBOBJ(inet_aton)
+fi
+])
+
+AC_DEFUN(BASH_FUNC_GETENV,
+[AC_MSG_CHECKING(to see if getenv can be redefined)
+AC_CACHE_VAL(bash_cv_getenv_redef,
+[AC_TRY_RUN([
+#ifdef HAVE_UNISTD_H
+#  include <unistd.h>
+#endif
+#include <stdlib.h>
+#ifndef __STDC__
+#  ifndef const
+#    define const
+#  endif
+#endif
+char *
+getenv (name)
+#if defined (__linux__) || defined (__bsdi__) || defined (convex)
+     const char *name;
+#else
+     char const *name;
+#endif /* !__linux__ && !__bsdi__ && !convex */
+{
+return "42";
+}
+int
+main()
+{
+char *s;
+/* The next allows this program to run, but does not allow bash to link
+   when it redefines getenv.  I'm not really interested in figuring out
+   why not. */
+#if defined (NeXT)
+exit(1);
+#endif
+s = getenv("ABCDE");
+exit(s == 0);	/* force optimizer to leave getenv in */
+}
+], bash_cv_getenv_redef=yes, bash_cv_getenv_redef=no,
+   [AC_MSG_WARN(cannot check getenv redefinition if cross compiling -- defaulting to yes)
+    bash_cv_getenv_redef=yes]
+)])
+AC_MSG_RESULT($bash_cv_getenv_redef)
+if test $bash_cv_getenv_redef = yes; then
+AC_DEFINE(CAN_REDEFINE_GETENV)
+fi
+])
+
+# We should check for putenv before calling this
+AC_DEFUN(BASH_FUNC_STD_PUTENV,
+[
+AC_REQUIRE([AC_HEADER_STDC])
+AC_REQUIRE([AC_C_PROTOTYPES])
+AC_CACHE_CHECK([for standard-conformant putenv declaration], bash_cv_std_putenv,
+[AC_TRY_LINK([
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+#ifndef __STDC__
+#  ifndef const
+#    define const
+#  endif
+#endif
+#ifdef PROTOTYPES
+extern int putenv (char *);
+#else
+extern int putenv ();
+#endif
+],
+[return (putenv == 0);],
+bash_cv_std_putenv=yes, bash_cv_std_putenv=no
+)])
+if test $bash_cv_std_putenv = yes; then
+AC_DEFINE(HAVE_STD_PUTENV)
+fi
+])
+
+# We should check for unsetenv before calling this
+AC_DEFUN(BASH_FUNC_STD_UNSETENV,
+[
+AC_REQUIRE([AC_HEADER_STDC])
+AC_REQUIRE([AC_C_PROTOTYPES])
+AC_CACHE_CHECK([for standard-conformant unsetenv declaration], bash_cv_std_unsetenv,
+[AC_TRY_LINK([
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+#ifndef __STDC__
+#  ifndef const
+#    define const
+#  endif
+#endif
+#ifdef PROTOTYPES
+extern int unsetenv (const char *);
+#else
+extern int unsetenv ();
+#endif
+],
+[return (unsetenv == 0);],
+bash_cv_std_unsetenv=yes, bash_cv_std_unsetenv=no
+)])
+if test $bash_cv_std_unsetenv = yes; then
+AC_DEFINE(HAVE_STD_UNSETENV)
+fi
+])
+
+AC_DEFUN(BASH_FUNC_ULIMIT_MAXFDS,
+[AC_MSG_CHECKING(whether ulimit can substitute for getdtablesize)
+AC_CACHE_VAL(bash_cv_ulimit_maxfds,
+[AC_TRY_RUN([
+#include <stdlib.h>
+#ifdef HAVE_ULIMIT_H
+#include <ulimit.h>
+#endif
+int
+main()
+{
+long maxfds = ulimit(4, 0L);
+exit (maxfds == -1L);
+}
+], bash_cv_ulimit_maxfds=yes, bash_cv_ulimit_maxfds=no,
+   [AC_MSG_WARN(cannot check ulimit if cross compiling -- defaulting to no)
+    bash_cv_ulimit_maxfds=no]
+)])
+AC_MSG_RESULT($bash_cv_ulimit_maxfds)
+if test $bash_cv_ulimit_maxfds = yes; then
+AC_DEFINE(ULIMIT_MAXFDS)
+fi
+])
+
+AC_DEFUN(BASH_FUNC_GETCWD,
+[AC_MSG_CHECKING([if getcwd() will dynamically allocate memory with 0 size])
+AC_CACHE_VAL(bash_cv_getcwd_malloc,
+[AC_TRY_RUN([
+#include <stdio.h>
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#include <stdlib.h>
+
+int
+main()
+{
+	char	*xpwd;
+	xpwd = getcwd(0, 0);
+	exit (xpwd == 0);
+}
+], bash_cv_getcwd_malloc=yes, bash_cv_getcwd_malloc=no,
+   [AC_MSG_WARN(cannot check whether getcwd allocates memory when cross-compiling -- defaulting to no)
+    bash_cv_getcwd_malloc=no]
+)])
+AC_MSG_RESULT($bash_cv_getcwd_malloc)
+if test $bash_cv_getcwd_malloc = no; then
+AC_DEFINE(GETCWD_BROKEN)
+AC_LIBOBJ(getcwd)
+fi
+])
+
+dnl
+dnl This needs BASH_CHECK_SOCKLIB, but since that's not called on every
+dnl system, we can't use AC_PREREQ
+dnl
+AC_DEFUN(BASH_FUNC_GETHOSTBYNAME,
+[if test "X$bash_cv_have_gethostbyname" = "X"; then
+_bash_needmsg=yes
+else
+AC_MSG_CHECKING(for gethostbyname in socket library)
+_bash_needmsg=
+fi
+AC_CACHE_VAL(bash_cv_have_gethostbyname,
+[AC_TRY_LINK([#include <netdb.h>],
+[ struct hostent *hp;
+  hp = gethostbyname("localhost");
+], bash_cv_have_gethostbyname=yes, bash_cv_have_gethostbyname=no)]
+)
+if test "X$_bash_needmsg" = Xyes; then
+    AC_MSG_CHECKING(for gethostbyname in socket library)
+fi
+AC_MSG_RESULT($bash_cv_have_gethostbyname)
+if test "$bash_cv_have_gethostbyname" = yes; then
+AC_DEFINE(HAVE_GETHOSTBYNAME)
+fi
+])
+
+AC_DEFUN(BASH_FUNC_FNMATCH_EXTMATCH,
+[AC_MSG_CHECKING(if fnmatch does extended pattern matching with FNM_EXTMATCH)
+AC_CACHE_VAL(bash_cv_fnm_extmatch,
+[AC_TRY_RUN([
+#include <fnmatch.h>
+
+int
+main()
+{
+#ifdef FNM_EXTMATCH
+  return (0);
+#else
+  return (1);
+#endif
+}
+], bash_cv_fnm_extmatch=yes, bash_cv_fnm_extmatch=no,
+    [AC_MSG_WARN(cannot check FNM_EXTMATCH if cross compiling -- defaulting to no)
+     bash_cv_fnm_extmatch=no])
+])
+AC_MSG_RESULT($bash_cv_fnm_extmatch)
+if test $bash_cv_fnm_extmatch = yes; then
+AC_DEFINE(HAVE_LIBC_FNM_EXTMATCH)
+fi
+])
+
+AC_DEFUN(BASH_FUNC_POSIX_SETJMP,
+[AC_REQUIRE([BASH_SYS_SIGNAL_VINTAGE])
+AC_MSG_CHECKING(for presence of POSIX-style sigsetjmp/siglongjmp)
+AC_CACHE_VAL(bash_cv_func_sigsetjmp,
+[AC_TRY_RUN([
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#include <sys/types.h>
+#include <signal.h>
+#include <setjmp.h>
+#include <stdlib.h>
+
+int
+main()
+{
+#if !defined (_POSIX_VERSION) || !defined (HAVE_POSIX_SIGNALS)
+exit (1);
+#else
+
+int code;
+sigset_t set, oset;
+sigjmp_buf xx;
+
+/* get the mask */
+sigemptyset(&set);
+sigemptyset(&oset);
+sigprocmask(SIG_BLOCK, (sigset_t *)NULL, &set);
+sigprocmask(SIG_BLOCK, (sigset_t *)NULL, &oset);
+
+/* save it */
+code = sigsetjmp(xx, 1);
+if (code)
+  exit(0);	/* could get sigmask and compare to oset here. */
+
+/* change it */
+sigaddset(&set, SIGINT);
+sigprocmask(SIG_BLOCK, &set, (sigset_t *)NULL);
+
+/* and siglongjmp */
+siglongjmp(xx, 10);
+exit(1);
+#endif
+}], bash_cv_func_sigsetjmp=present, bash_cv_func_sigsetjmp=missing,
+    [AC_MSG_WARN(cannot check for sigsetjmp/siglongjmp if cross-compiling -- defaulting to missing)
+     bash_cv_func_sigsetjmp=missing]
+)])
+AC_MSG_RESULT($bash_cv_func_sigsetjmp)
+if test $bash_cv_func_sigsetjmp = present; then
+AC_DEFINE(HAVE_POSIX_SIGSETJMP)
+fi
+])
+
+AC_DEFUN(BASH_FUNC_STRCOLL,
+[
+AC_MSG_CHECKING(whether or not strcoll and strcmp differ)
+AC_CACHE_VAL(bash_cv_func_strcoll_broken,
+[AC_TRY_RUN([
+#include <stdio.h>
+#if defined (HAVE_LOCALE_H)
+#include <locale.h>
+#endif
+#include <string.h>
+#include <stdlib.h>
+
+int
+main(c, v)
+int     c;
+char    *v[];
+{
+        int     r1, r2;
+        char    *deflocale, *defcoll;
+
+#ifdef HAVE_SETLOCALE
+        deflocale = setlocale(LC_ALL, "");
+	defcoll = setlocale(LC_COLLATE, "");
+#endif
+
+#ifdef HAVE_STRCOLL
+	/* These two values are taken from tests/glob-test. */
+        r1 = strcoll("abd", "aXd");
+#else
+	r1 = 0;
+#endif
+        r2 = strcmp("abd", "aXd");
+
+	/* These two should both be greater than 0.  It is permissible for
+	   a system to return different values, as long as the sign is the
+	   same. */
+
+        /* Exit with 1 (failure) if these two values are both > 0, since
+	   this tests whether strcoll(3) is broken with respect to strcmp(3)
+	   in the default locale. */
+	exit (r1 > 0 && r2 > 0);
+}
+], bash_cv_func_strcoll_broken=yes, bash_cv_func_strcoll_broken=no,
+   [AC_MSG_WARN(cannot check strcoll if cross compiling -- defaulting to no)
+    bash_cv_func_strcoll_broken=no]
+)])
+AC_MSG_RESULT($bash_cv_func_strcoll_broken)
+if test $bash_cv_func_strcoll_broken = yes; then
+AC_DEFINE(STRCOLL_BROKEN)
+fi
+])
+
+AC_DEFUN(BASH_FUNC_PRINTF_A_FORMAT,
+[AC_MSG_CHECKING([for printf floating point output in hex notation])
+AC_CACHE_VAL(bash_cv_printf_a_format,
+[AC_TRY_RUN([
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+
+int
+main()
+{
+	double y = 0.0;
+	char abuf[1024];
+
+	sprintf(abuf, "%A", y);
+	exit(strchr(abuf, 'P') == (char *)0);
+}
+], bash_cv_printf_a_format=yes, bash_cv_printf_a_format=no,
+   [AC_MSG_WARN(cannot check printf if cross compiling -- defaulting to no)
+    bash_cv_printf_a_format=no]
+)])
+AC_MSG_RESULT($bash_cv_printf_a_format)
+if test $bash_cv_printf_a_format = yes; then
+AC_DEFINE(HAVE_PRINTF_A_FORMAT)
+fi
+])
+
+AC_DEFUN(BASH_STRUCT_TERMIOS_LDISC,
+[
+AC_CHECK_MEMBER(struct termios.c_line, AC_DEFINE(TERMIOS_LDISC), ,[
+#include <sys/types.h>
+#include <termios.h>
+])
+])
+
+AC_DEFUN(BASH_STRUCT_TERMIO_LDISC,
+[
+AC_CHECK_MEMBER(struct termio.c_line, AC_DEFINE(TERMIO_LDISC), ,[
+#include <sys/types.h>
+#include <termio.h>
+])
+])
+
+dnl
+dnl Like AC_STRUCT_ST_BLOCKS, but doesn't muck with LIBOBJS
+dnl
+dnl sets bash_cv_struct_stat_st_blocks
+dnl
+dnl unused for now; we'll see how AC_CHECK_MEMBERS works
+dnl
+AC_DEFUN(BASH_STRUCT_ST_BLOCKS,
+[
+AC_MSG_CHECKING([for struct stat.st_blocks])
+AC_CACHE_VAL(bash_cv_struct_stat_st_blocks,
+[AC_TRY_COMPILE(
+[
+#include <sys/types.h>
+#include <sys/stat.h>
+],
+[
+int
+main()
+{
+static struct stat a;
+if (a.st_blocks) return 0;
+return 0;
+}
+], bash_cv_struct_stat_st_blocks=yes, bash_cv_struct_stat_st_blocks=no)
+])
+AC_MSG_RESULT($bash_cv_struct_stat_st_blocks)
+if test "$bash_cv_struct_stat_st_blocks" = "yes"; then
+AC_DEFINE(HAVE_STRUCT_STAT_ST_BLOCKS)
+fi
+])
+
+AC_DEFUN([BASH_CHECK_LIB_TERMCAP],
+[
+if test "X$bash_cv_termcap_lib" = "X"; then
+_bash_needmsg=yes
+else
+AC_MSG_CHECKING(which library has the termcap functions)
+_bash_needmsg=
+fi
+AC_CACHE_VAL(bash_cv_termcap_lib,
+[AC_CHECK_FUNC(tgetent, bash_cv_termcap_lib=libc,
+  [AC_CHECK_LIB(termcap, tgetent, bash_cv_termcap_lib=libtermcap,
+    [AC_CHECK_LIB(tinfo, tgetent, bash_cv_termcap_lib=libtinfo,
+        [AC_CHECK_LIB(curses, tgetent, bash_cv_termcap_lib=libcurses,
+	    [AC_CHECK_LIB(ncurses, tgetent, bash_cv_termcap_lib=libncurses,
+                [AC_CHECK_LIB(ncursesw, tgetent, bash_cv_termcap_lib=libncursesw,
+	            bash_cv_termcap_lib=gnutermcap)])])])])])])
+if test "X$_bash_needmsg" = "Xyes"; then
+AC_MSG_CHECKING(which library has the termcap functions)
+fi
+AC_MSG_RESULT(using $bash_cv_termcap_lib)
+if test $bash_cv_termcap_lib = gnutermcap && test -z "$prefer_curses"; then
+LDFLAGS="$LDFLAGS -L./lib/termcap"
+TERMCAP_LIB="./lib/termcap/libtermcap.a"
+TERMCAP_DEP="./lib/termcap/libtermcap.a"
+elif test $bash_cv_termcap_lib = libtermcap && test -z "$prefer_curses"; then
+TERMCAP_LIB=-ltermcap
+TERMCAP_DEP=
+elif test $bash_cv_termcap_lib = libtinfo; then
+TERMCAP_LIB=-ltinfo
+TERMCAP_DEP=
+elif test $bash_cv_termcap_lib = libncurses; then
+TERMCAP_LIB=-lncurses
+TERMCAP_DEP=
+elif test $bash_cv_termcap_lib = libc; then
+TERMCAP_LIB=
+TERMCAP_DEP=
+else
+TERMCAP_LIB=-lcurses
+TERMCAP_DEP=
+fi
+])
+
+dnl
+dnl Check for the presence of getpeername in libsocket.
+dnl If libsocket is present, check for libnsl and add it to LIBS if
+dnl it's there, since most systems with libsocket require linking
+dnl with libnsl as well.  This should only be called if getpeername
+dnl was not found in libc.
+dnl
+dnl NOTE: IF WE FIND GETPEERNAME, WE ASSUME THAT WE HAVE BIND/CONNECT
+dnl	  AS WELL
+dnl
+AC_DEFUN(BASH_CHECK_LIB_SOCKET,
+[
+if test "X$bash_cv_have_socklib" = "X"; then
+_bash_needmsg=
+else
+AC_MSG_CHECKING(for socket library)
+_bash_needmsg=yes
+fi
+AC_CACHE_VAL(bash_cv_have_socklib,
+[AC_CHECK_LIB(socket, getpeername,
+        bash_cv_have_socklib=yes, bash_cv_have_socklib=no, -lnsl)])
+if test "X$_bash_needmsg" = Xyes; then
+  AC_MSG_RESULT($bash_cv_have_socklib)
+  _bash_needmsg=
+fi
+if test $bash_cv_have_socklib = yes; then
+  # check for libnsl, add it to LIBS if present
+  if test "X$bash_cv_have_libnsl" = "X"; then
+    _bash_needmsg=
+  else
+    AC_MSG_CHECKING(for libnsl)
+    _bash_needmsg=yes
+  fi
+  AC_CACHE_VAL(bash_cv_have_libnsl,
+	   [AC_CHECK_LIB(nsl, t_open,
+		 bash_cv_have_libnsl=yes, bash_cv_have_libnsl=no)])
+  if test "X$_bash_needmsg" = Xyes; then
+    AC_MSG_RESULT($bash_cv_have_libnsl)
+    _bash_needmsg=
+  fi
+  if test $bash_cv_have_libnsl = yes; then
+    LIBS="-lsocket -lnsl $LIBS"
+  else
+    LIBS="-lsocket $LIBS"
+  fi
+  AC_DEFINE(HAVE_LIBSOCKET)
+  AC_DEFINE(HAVE_GETPEERNAME)
+fi
+])
+
+AC_DEFUN(BASH_STRUCT_DIRENT_D_INO,
+[AC_REQUIRE([AC_HEADER_DIRENT])
+AC_MSG_CHECKING(for struct dirent.d_ino)
+AC_CACHE_VAL(bash_cv_dirent_has_dino,
+[AC_TRY_COMPILE([
+#include <stdio.h>
+#include <sys/types.h>
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif /* HAVE_UNISTD_H */
+#if defined(HAVE_DIRENT_H)
+# include <dirent.h>
+#else
+# define dirent direct
+# ifdef HAVE_SYS_NDIR_H
+#  include <sys/ndir.h>
+# endif /* SYSNDIR */
+# ifdef HAVE_SYS_DIR_H
+#  include <sys/dir.h>
+# endif /* SYSDIR */
+# ifdef HAVE_NDIR_H
+#  include <ndir.h>
+# endif
+#endif /* HAVE_DIRENT_H */
+],[
+struct dirent d; int z; z = d.d_ino;
+], bash_cv_dirent_has_dino=yes, bash_cv_dirent_has_dino=no)])
+AC_MSG_RESULT($bash_cv_dirent_has_dino)
+if test $bash_cv_dirent_has_dino = yes; then
+AC_DEFINE(HAVE_STRUCT_DIRENT_D_INO)
+fi
+])
+
+AC_DEFUN(BASH_STRUCT_DIRENT_D_FILENO,
+[AC_REQUIRE([AC_HEADER_DIRENT])
+AC_MSG_CHECKING(for struct dirent.d_fileno)
+AC_CACHE_VAL(bash_cv_dirent_has_d_fileno,
+[AC_TRY_COMPILE([
+#include <stdio.h>
+#include <sys/types.h>
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif /* HAVE_UNISTD_H */
+#if defined(HAVE_DIRENT_H)
+# include <dirent.h>
+#else
+# define dirent direct
+# ifdef HAVE_SYS_NDIR_H
+#  include <sys/ndir.h>
+# endif /* SYSNDIR */
+# ifdef HAVE_SYS_DIR_H
+#  include <sys/dir.h>
+# endif /* SYSDIR */
+# ifdef HAVE_NDIR_H
+#  include <ndir.h>
+# endif
+#endif /* HAVE_DIRENT_H */
+],[
+struct dirent d; int z; z = d.d_fileno;
+], bash_cv_dirent_has_d_fileno=yes, bash_cv_dirent_has_d_fileno=no)])
+AC_MSG_RESULT($bash_cv_dirent_has_d_fileno)
+if test $bash_cv_dirent_has_d_fileno = yes; then
+AC_DEFINE(HAVE_STRUCT_DIRENT_D_FILENO)
+fi
+])
+
+AC_DEFUN(BASH_STRUCT_DIRENT_D_NAMLEN,
+[AC_REQUIRE([AC_HEADER_DIRENT])
+AC_MSG_CHECKING(for struct dirent.d_namlen)
+AC_CACHE_VAL(bash_cv_dirent_has_d_namlen,
+[AC_TRY_COMPILE([
+#include <stdio.h>
+#include <sys/types.h>
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif /* HAVE_UNISTD_H */
+#if defined(HAVE_DIRENT_H)
+# include <dirent.h>
+#else
+# define dirent direct
+# ifdef HAVE_SYS_NDIR_H
+#  include <sys/ndir.h>
+# endif /* SYSNDIR */
+# ifdef HAVE_SYS_DIR_H
+#  include <sys/dir.h>
+# endif /* SYSDIR */
+# ifdef HAVE_NDIR_H
+#  include <ndir.h>
+# endif
+#endif /* HAVE_DIRENT_H */
+],[
+struct dirent d; int z; z = d.d_namlen;
+], bash_cv_dirent_has_d_namlen=yes, bash_cv_dirent_has_d_namlen=no)])
+AC_MSG_RESULT($bash_cv_dirent_has_d_namlen)
+if test $bash_cv_dirent_has_d_namlen = yes; then
+AC_DEFINE(HAVE_STRUCT_DIRENT_D_NAMLEN)
+fi
+])
+
+AC_DEFUN(BASH_STRUCT_TIMEVAL,
+[AC_MSG_CHECKING(for struct timeval in sys/time.h and time.h)
+AC_CACHE_VAL(bash_cv_struct_timeval,
+[AC_COMPILE_IFELSE(
+	[AC_LANG_PROGRAM(
+		[[#if HAVE_SYS_TIME_H
+		  #include <sys/time.h>
+		  #endif
+		  #include <time.h>
+		]],
+		[[static struct timeval x; x.tv_sec = x.tv_usec;]]
+	)],
+	bash_cv_struct_timeval=yes,
+	bash_cv_struct_timeval=no)
+])
+AC_MSG_RESULT($bash_cv_struct_timeval)
+if test $bash_cv_struct_timeval = yes; then
+  AC_DEFINE(HAVE_TIMEVAL)
+fi
+])
+
+AC_DEFUN(BASH_STRUCT_TIMEZONE,
+[AC_MSG_CHECKING(for struct timezone in sys/time.h and time.h)
+AC_CACHE_VAL(bash_cv_struct_timezone,
+[
+AC_EGREP_HEADER(struct timezone, sys/time.h,
+		bash_cv_struct_timezone=yes,
+		AC_EGREP_HEADER(struct timezone, time.h,
+			bash_cv_struct_timezone=yes,
+			bash_cv_struct_timezone=no))
+])
+AC_MSG_RESULT($bash_cv_struct_timezone)
+if test $bash_cv_struct_timezone = yes; then
+  AC_DEFINE(HAVE_STRUCT_TIMEZONE)
+fi
+])
+
+AC_DEFUN(BASH_STRUCT_WINSIZE,
+[AC_MSG_CHECKING(for struct winsize in sys/ioctl.h and termios.h)
+AC_CACHE_VAL(bash_cv_struct_winsize_header,
+[AC_TRY_COMPILE([#include <sys/types.h>
+#include <sys/ioctl.h>], [struct winsize x;],
+  bash_cv_struct_winsize_header=ioctl_h,
+  [AC_TRY_COMPILE([#include <sys/types.h>
+#include <termios.h>], [struct winsize x;],
+  bash_cv_struct_winsize_header=termios_h, bash_cv_struct_winsize_header=other)
+])])
+if test $bash_cv_struct_winsize_header = ioctl_h; then
+  AC_MSG_RESULT(sys/ioctl.h)
+  AC_DEFINE(STRUCT_WINSIZE_IN_SYS_IOCTL)
+elif test $bash_cv_struct_winsize_header = termios_h; then
+  AC_MSG_RESULT(termios.h)
+  AC_DEFINE(STRUCT_WINSIZE_IN_TERMIOS)
+else
+  AC_MSG_RESULT(not found)
+fi
+])
+
+dnl Check type of signal routines (posix, 4.2bsd, 4.1bsd or v7)
+AC_DEFUN(BASH_SYS_SIGNAL_VINTAGE,
+[AC_REQUIRE([AC_TYPE_SIGNAL])
+AC_MSG_CHECKING(for type of signal functions)
+AC_CACHE_VAL(bash_cv_signal_vintage,
+[
+  AC_TRY_LINK([#include <signal.h>],[
+    sigset_t ss;
+    struct sigaction sa;
+    sigemptyset(&ss); sigsuspend(&ss);
+    sigaction(SIGINT, &sa, (struct sigaction *) 0);
+    sigprocmask(SIG_BLOCK, &ss, (sigset_t *) 0);
+  ], bash_cv_signal_vintage=posix,
+  [
+    AC_TRY_LINK([#include <signal.h>], [
+	int mask = sigmask(SIGINT);
+	sigsetmask(mask); sigblock(mask); sigpause(mask);
+    ], bash_cv_signal_vintage=4.2bsd,
+    [
+      AC_TRY_LINK([
+	#include <signal.h>
+	RETSIGTYPE foo() { }], [
+		int mask = sigmask(SIGINT);
+		sigset(SIGINT, foo); sigrelse(SIGINT);
+		sighold(SIGINT); sigpause(SIGINT);
+        ], bash_cv_signal_vintage=svr3, bash_cv_signal_vintage=v7
+    )]
+  )]
+)
+])
+AC_MSG_RESULT($bash_cv_signal_vintage)
+if test "$bash_cv_signal_vintage" = posix; then
+AC_DEFINE(HAVE_POSIX_SIGNALS)
+elif test "$bash_cv_signal_vintage" = "4.2bsd"; then
+AC_DEFINE(HAVE_BSD_SIGNALS)
+elif test "$bash_cv_signal_vintage" = svr3; then
+AC_DEFINE(HAVE_USG_SIGHOLD)
+fi
+])
+
+dnl Check if the pgrp of setpgrp() can't be the pid of a zombie process.
+AC_DEFUN(BASH_SYS_PGRP_SYNC,
+[AC_REQUIRE([AC_FUNC_GETPGRP])
+AC_MSG_CHECKING(whether pgrps need synchronization)
+AC_CACHE_VAL(bash_cv_pgrp_pipe,
+[AC_TRY_RUN([
+#ifdef HAVE_UNISTD_H
+#  include <unistd.h>
+#endif
+#ifdef HAVE_SYS_WAIT_H
+#  include <sys/wait.h>
+#endif
+#include <stdlib.h>
+int
+main()
+{
+# ifdef GETPGRP_VOID
+#  define getpgID()	getpgrp()
+# else
+#  define getpgID()	getpgrp(0)
+#  define setpgid(x,y)	setpgrp(x,y)
+# endif
+	int pid1, pid2, fds[2];
+	int status;
+	char ok;
+
+	switch (pid1 = fork()) {
+	  case -1:
+	    exit(1);
+	  case 0:
+	    setpgid(0, getpid());
+	    exit(0);
+	}
+	setpgid(pid1, pid1);
+
+	sleep(2);	/* let first child die */
+
+	if (pipe(fds) < 0)
+	  exit(2);
+
+	switch (pid2 = fork()) {
+	  case -1:
+	    exit(3);
+	  case 0:
+	    setpgid(0, pid1);
+	    ok = getpgID() == pid1;
+	    write(fds[1], &ok, 1);
+	    exit(0);
+	}
+	setpgid(pid2, pid1);
+
+	close(fds[1]);
+	if (read(fds[0], &ok, 1) != 1)
+	  exit(4);
+	wait(&status);
+	wait(&status);
+	exit(ok ? 0 : 5);
+}
+], bash_cv_pgrp_pipe=no,bash_cv_pgrp_pipe=yes,
+   [AC_MSG_WARN(cannot check pgrp synchronization if cross compiling -- defaulting to no)
+    bash_cv_pgrp_pipe=no])
+])
+AC_MSG_RESULT($bash_cv_pgrp_pipe)
+if test $bash_cv_pgrp_pipe = yes; then
+AC_DEFINE(PGRP_PIPE)
+fi
+])
+
+AC_DEFUN(BASH_SYS_REINSTALL_SIGHANDLERS,
+[AC_REQUIRE([AC_TYPE_SIGNAL])
+AC_REQUIRE([BASH_SYS_SIGNAL_VINTAGE])
+AC_MSG_CHECKING([if signal handlers must be reinstalled when invoked])
+AC_CACHE_VAL(bash_cv_must_reinstall_sighandlers,
+[AC_TRY_RUN([
+#include <signal.h>
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#include <stdlib.h>
+
+typedef RETSIGTYPE sigfunc();
+
+volatile int nsigint;
+
+#ifdef HAVE_POSIX_SIGNALS
+sigfunc *
+set_signal_handler(sig, handler)
+     int sig;
+     sigfunc *handler;
+{
+  struct sigaction act, oact;
+  act.sa_handler = handler;
+  act.sa_flags = 0;
+  sigemptyset (&act.sa_mask);
+  sigemptyset (&oact.sa_mask);
+  sigaction (sig, &act, &oact);
+  return (oact.sa_handler);
+}
+#else
+#define set_signal_handler(s, h) signal(s, h)
+#endif
+
+RETSIGTYPE
+sigint(s)
+int s;
+{
+  nsigint++;
+}
+
+int
+main()
+{
+	nsigint = 0;
+	set_signal_handler(SIGINT, sigint);
+	kill((int)getpid(), SIGINT);
+	kill((int)getpid(), SIGINT);
+	exit(nsigint != 2);
+}
+], bash_cv_must_reinstall_sighandlers=no, bash_cv_must_reinstall_sighandlers=yes,
+   [AC_MSG_WARN(cannot check signal handling if cross compiling -- defaulting to no)
+    bash_cv_must_reinstall_sighandlers=no]
+)])
+AC_MSG_RESULT($bash_cv_must_reinstall_sighandlers)
+if test $bash_cv_must_reinstall_sighandlers = yes; then
+AC_DEFINE(MUST_REINSTALL_SIGHANDLERS)
+fi
+])
+
+dnl check that some necessary job control definitions are present
+AC_DEFUN(BASH_SYS_JOB_CONTROL_MISSING,
+[AC_REQUIRE([BASH_SYS_SIGNAL_VINTAGE])
+AC_MSG_CHECKING(for presence of necessary job control definitions)
+AC_CACHE_VAL(bash_cv_job_control_missing,
+[AC_TRY_COMPILE([
+#include <sys/types.h>
+#ifdef HAVE_SYS_WAIT_H
+#include <sys/wait.h>
+#endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#include <signal.h>
+
+/* add more tests in here as appropriate */
+
+/* signal type */
+#if !defined (HAVE_POSIX_SIGNALS) && !defined (HAVE_BSD_SIGNALS)
+#error
+#endif
+
+/* signals and tty control. */
+#if !defined (SIGTSTP) || !defined (SIGSTOP) || !defined (SIGCONT)
+#error
+#endif
+
+/* process control */
+#if !defined (WNOHANG) || !defined (WUNTRACED) 
+#error
+#endif
+
+/* Posix systems have tcgetpgrp and waitpid. */
+#if defined (_POSIX_VERSION) && !defined (HAVE_TCGETPGRP)
+#error
+#endif
+
+#if defined (_POSIX_VERSION) && !defined (HAVE_WAITPID)
+#error
+#endif
+
+/* Other systems have TIOCSPGRP/TIOCGPRGP and wait3. */
+#if !defined (_POSIX_VERSION) && !defined (HAVE_WAIT3)
+#error
+#endif
+
+], , bash_cv_job_control_missing=present, bash_cv_job_control_missing=missing
+)])
+AC_MSG_RESULT($bash_cv_job_control_missing)
+if test $bash_cv_job_control_missing = missing; then
+AC_DEFINE(JOB_CONTROL_MISSING)
+fi
+])
+
+dnl check whether named pipes are present
+dnl this requires a previous check for mkfifo, but that is awkward to specify
+AC_DEFUN(BASH_SYS_NAMED_PIPES,
+[AC_MSG_CHECKING(for presence of named pipes)
+AC_CACHE_VAL(bash_cv_sys_named_pipes,
+[AC_TRY_RUN([
+#include <sys/types.h>
+#include <sys/stat.h>
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+
+/* Add more tests in here as appropriate. */
+int
+main()
+{
+int fd, err;
+
+#if defined (HAVE_MKFIFO)
+exit (0);
+#endif
+
+#if !defined (S_IFIFO) && (defined (_POSIX_VERSION) && !defined (S_ISFIFO))
+exit (1);
+#endif
+
+#if defined (NeXT)
+exit (1);
+#endif
+err = mkdir("bash-aclocal", 0700);
+if (err < 0) {
+  perror ("mkdir");
+  exit(1);
+}
+fd = mknod ("bash-aclocal/sh-np-autoconf", 0666 | S_IFIFO, 0);
+if (fd == -1) {
+  rmdir ("bash-aclocal");
+  exit (1);
+}
+close(fd);
+unlink ("bash-aclocal/sh-np-autoconf");
+rmdir ("bash-aclocal");
+exit(0);
+}], bash_cv_sys_named_pipes=present, bash_cv_sys_named_pipes=missing,
+    [AC_MSG_WARN(cannot check for named pipes if cross-compiling -- defaulting to missing)
+     bash_cv_sys_named_pipes=missing]
+)])
+AC_MSG_RESULT($bash_cv_sys_named_pipes)
+if test $bash_cv_sys_named_pipes = missing; then
+AC_DEFINE(NAMED_PIPES_MISSING)
+fi
+])
+
+AC_DEFUN(BASH_SYS_DEFAULT_MAIL_DIR,
+[AC_MSG_CHECKING(for default mail directory)
+AC_CACHE_VAL(bash_cv_mail_dir,
+[if test -d /var/mail; then
+   bash_cv_mail_dir=/var/mail
+ elif test -d /var/spool/mail; then
+   bash_cv_mail_dir=/var/spool/mail
+ elif test -d /usr/mail; then
+   bash_cv_mail_dir=/usr/mail
+ elif test -d /usr/spool/mail; then
+   bash_cv_mail_dir=/usr/spool/mail
+ else
+   bash_cv_mail_dir=unknown
+ fi
+])
+AC_MSG_RESULT($bash_cv_mail_dir)
+AC_DEFINE_UNQUOTED(DEFAULT_MAIL_DIRECTORY, "$bash_cv_mail_dir")
+])
+
+AC_DEFUN(BASH_HAVE_TIOCGWINSZ,
+[AC_MSG_CHECKING(for TIOCGWINSZ in sys/ioctl.h)
+AC_CACHE_VAL(bash_cv_tiocgwinsz_in_ioctl,
+[AC_TRY_COMPILE([#include <sys/types.h>
+#include <sys/ioctl.h>], [int x = TIOCGWINSZ;],
+  bash_cv_tiocgwinsz_in_ioctl=yes,bash_cv_tiocgwinsz_in_ioctl=no)])
+AC_MSG_RESULT($bash_cv_tiocgwinsz_in_ioctl)
+if test $bash_cv_tiocgwinsz_in_ioctl = yes; then   
+AC_DEFINE(GWINSZ_IN_SYS_IOCTL)
+fi
+])
+
+AC_DEFUN(BASH_HAVE_TIOCSTAT,
+[AC_MSG_CHECKING(for TIOCSTAT in sys/ioctl.h)
+AC_CACHE_VAL(bash_cv_tiocstat_in_ioctl,
+[AC_TRY_COMPILE([#include <sys/types.h>
+#include <sys/ioctl.h>], [int x = TIOCSTAT;],
+  bash_cv_tiocstat_in_ioctl=yes,bash_cv_tiocstat_in_ioctl=no)])
+AC_MSG_RESULT($bash_cv_tiocstat_in_ioctl)
+if test $bash_cv_tiocstat_in_ioctl = yes; then   
+AC_DEFINE(TIOCSTAT_IN_SYS_IOCTL)
+fi
+])
+
+AC_DEFUN(BASH_HAVE_FIONREAD,
+[AC_MSG_CHECKING(for FIONREAD in sys/ioctl.h)
+AC_CACHE_VAL(bash_cv_fionread_in_ioctl,
+[AC_TRY_COMPILE([#include <sys/types.h>
+#include <sys/ioctl.h>], [int x = FIONREAD;],
+  bash_cv_fionread_in_ioctl=yes,bash_cv_fionread_in_ioctl=no)])
+AC_MSG_RESULT($bash_cv_fionread_in_ioctl)
+if test $bash_cv_fionread_in_ioctl = yes; then   
+AC_DEFINE(FIONREAD_IN_SYS_IOCTL)
+fi
+])
+
+dnl
+dnl See if speed_t is declared in <sys/types.h>.  Some versions of linux
+dnl require a definition of speed_t each time <termcap.h> is included,
+dnl but you can only get speed_t if you include <termios.h> (on some
+dnl versions) or <sys/types.h> (on others).
+dnl
+AC_DEFUN(BASH_CHECK_SPEED_T,
+[AC_MSG_CHECKING(for speed_t in sys/types.h)
+AC_CACHE_VAL(bash_cv_speed_t_in_sys_types,
+[AC_TRY_COMPILE([#include <sys/types.h>], [speed_t x;],
+  bash_cv_speed_t_in_sys_types=yes,bash_cv_speed_t_in_sys_types=no)])
+AC_MSG_RESULT($bash_cv_speed_t_in_sys_types)
+if test $bash_cv_speed_t_in_sys_types = yes; then   
+AC_DEFINE(SPEED_T_IN_SYS_TYPES)
+fi
+])
+
+AC_DEFUN(BASH_CHECK_GETPW_FUNCS,
+[AC_MSG_CHECKING(whether getpw functions are declared in pwd.h)
+AC_CACHE_VAL(bash_cv_getpw_declared,
+[AC_EGREP_CPP(getpwuid,
+[
+#include <sys/types.h>
+#ifdef HAVE_UNISTD_H
+#  include <unistd.h>
+#endif
+#include <pwd.h>
+],
+bash_cv_getpw_declared=yes,bash_cv_getpw_declared=no)])
+AC_MSG_RESULT($bash_cv_getpw_declared)
+if test $bash_cv_getpw_declared = yes; then
+AC_DEFINE(HAVE_GETPW_DECLS)
+fi
+])
+
+AC_DEFUN(BASH_CHECK_DEV_FD,
+[AC_MSG_CHECKING(whether /dev/fd is available)
+AC_CACHE_VAL(bash_cv_dev_fd,
+[bash_cv_dev_fd=""
+if test -d /dev/fd  && (exec test -r /dev/fd/0 < /dev/null) ; then
+# check for systems like FreeBSD 5 that only provide /dev/fd/[012]
+   if (exec test -r /dev/fd/3 3</dev/null) ; then
+     bash_cv_dev_fd=standard
+   else
+     bash_cv_dev_fd=absent
+   fi
+fi
+if test -z "$bash_cv_dev_fd" ; then 
+  if test -d /proc/self/fd && (exec test -r /proc/self/fd/0 < /dev/null) ; then
+    bash_cv_dev_fd=whacky
+  else
+    bash_cv_dev_fd=absent
+  fi
+fi
+])
+AC_MSG_RESULT($bash_cv_dev_fd)
+if test $bash_cv_dev_fd = "standard"; then
+  AC_DEFINE(HAVE_DEV_FD)
+  AC_DEFINE(DEV_FD_PREFIX, "/dev/fd/")
+elif test $bash_cv_dev_fd = "whacky"; then
+  AC_DEFINE(HAVE_DEV_FD)
+  AC_DEFINE(DEV_FD_PREFIX, "/proc/self/fd/")
+fi
+])
+
+AC_DEFUN(BASH_CHECK_DEV_STDIN,
+[AC_MSG_CHECKING(whether /dev/stdin stdout stderr are available)
+AC_CACHE_VAL(bash_cv_dev_stdin,
+[if (exec test -r /dev/stdin < /dev/null) ; then
+   bash_cv_dev_stdin=present
+ else
+   bash_cv_dev_stdin=absent
+ fi
+])
+AC_MSG_RESULT($bash_cv_dev_stdin)
+if test $bash_cv_dev_stdin = "present"; then
+  AC_DEFINE(HAVE_DEV_STDIN)
+fi
+])
+
+dnl
+dnl Check if HPUX needs _KERNEL defined for RLIMIT_* definitions
+dnl
+AC_DEFUN(BASH_CHECK_KERNEL_RLIMIT,
+[AC_MSG_CHECKING([whether $host_os needs _KERNEL for RLIMIT defines])
+AC_CACHE_VAL(bash_cv_kernel_rlimit,
+[AC_TRY_COMPILE([
+#include <sys/types.h>
+#include <sys/resource.h>
+],
+[
+  int f;
+  f = RLIMIT_DATA;
+], bash_cv_kernel_rlimit=no,
+[AC_TRY_COMPILE([
+#include <sys/types.h>
+#define _KERNEL
+#include <sys/resource.h>
+#undef _KERNEL
+],
+[
+	int f;
+        f = RLIMIT_DATA;
+], bash_cv_kernel_rlimit=yes, bash_cv_kernel_rlimit=no)]
+)])
+AC_MSG_RESULT($bash_cv_kernel_rlimit)
+if test $bash_cv_kernel_rlimit = yes; then
+AC_DEFINE(RLIMIT_NEEDS_KERNEL)
+fi
+])
+
+dnl
+dnl Check for 64-bit off_t -- used for malloc alignment
+dnl
+dnl C does not allow duplicate case labels, so the compile will fail if
+dnl sizeof(off_t) is > 4.
+dnl
+AC_DEFUN(BASH_CHECK_OFF_T_64,
+[AC_CACHE_CHECK(for 64-bit off_t, bash_cv_off_t_64,
+AC_TRY_COMPILE([
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#include <sys/types.h>
+],[
+switch (0) case 0: case (sizeof (off_t) <= 4):;
+], bash_cv_off_t_64=no, bash_cv_off_t_64=yes))
+if test $bash_cv_off_t_64 = yes; then
+        AC_DEFINE(HAVE_OFF_T_64)
+fi])
+
+AC_DEFUN(BASH_CHECK_RTSIGS,
+[AC_MSG_CHECKING(for unusable real-time signals due to large values)
+AC_CACHE_VAL(bash_cv_unusable_rtsigs,
+[AC_TRY_RUN([
+#include <sys/types.h>
+#include <signal.h>
+#include <stdlib.h>
+
+#ifndef NSIG
+#  define NSIG 64
+#endif
+
+int
+main ()
+{
+  int n_sigs = 2 * NSIG;
+#ifdef SIGRTMIN
+  int rtmin = SIGRTMIN;
+#else
+  int rtmin = 0;
+#endif
+
+  exit(rtmin < n_sigs);
+}], bash_cv_unusable_rtsigs=yes, bash_cv_unusable_rtsigs=no,
+    [AC_MSG_WARN(cannot check real-time signals if cross compiling -- defaulting to yes)
+     bash_cv_unusable_rtsigs=yes]
+)])
+AC_MSG_RESULT($bash_cv_unusable_rtsigs)
+if test $bash_cv_unusable_rtsigs = yes; then
+AC_DEFINE(UNUSABLE_RT_SIGNALS)
+fi
+])
+
+dnl
+dnl check for availability of multibyte characters and functions
+dnl
+dnl geez, I wish I didn't have to check for all of this stuff separately
+dnl
+AC_DEFUN(BASH_CHECK_MULTIBYTE,
+[
+AC_CHECK_HEADERS(wctype.h)
+AC_CHECK_HEADERS(wchar.h)
+AC_CHECK_HEADERS(langinfo.h)
+
+AC_CHECK_HEADERS(mbstr.h)
+
+AC_CHECK_FUNC(mbrlen, AC_DEFINE(HAVE_MBRLEN))
+AC_CHECK_FUNC(mbscasecmp, AC_DEFINE(HAVE_MBSCMP))
+AC_CHECK_FUNC(mbscmp, AC_DEFINE(HAVE_MBSCMP))
+AC_CHECK_FUNC(mbsnrtowcs, AC_DEFINE(HAVE_MBSNRTOWCS))
+AC_CHECK_FUNC(mbsrtowcs, AC_DEFINE(HAVE_MBSRTOWCS))
+
+AC_REPLACE_FUNCS(mbschr)
+
+AC_CHECK_FUNC(wcrtomb, AC_DEFINE(HAVE_WCRTOMB))
+AC_CHECK_FUNC(wcscoll, AC_DEFINE(HAVE_WCSCOLL))
+AC_CHECK_FUNC(wcsdup, AC_DEFINE(HAVE_WCSDUP))
+AC_CHECK_FUNC(wcwidth, AC_DEFINE(HAVE_WCWIDTH))
+AC_CHECK_FUNC(wctype, AC_DEFINE(HAVE_WCTYPE))
+
+AC_REPLACE_FUNCS(wcswidth)
+
+dnl checks for both mbrtowc and mbstate_t
+AC_FUNC_MBRTOWC
+if test $ac_cv_func_mbrtowc = yes; then
+	AC_DEFINE(HAVE_MBSTATE_T)
+fi
+
+AC_CHECK_FUNCS(iswlower iswupper towlower towupper iswctype)
+
+AC_CACHE_CHECK([for nl_langinfo and CODESET], bash_cv_langinfo_codeset,
+[AC_TRY_LINK(
+[#include <langinfo.h>],
+[char* cs = nl_langinfo(CODESET);],
+bash_cv_langinfo_codeset=yes, bash_cv_langinfo_codeset=no)])
+if test $bash_cv_langinfo_codeset = yes; then
+  AC_DEFINE(HAVE_LANGINFO_CODESET)
+fi
+
+dnl check for wchar_t in <wchar.h>
+AC_CACHE_CHECK([for wchar_t in wchar.h], bash_cv_type_wchar_t,
+[AC_TRY_COMPILE(
+[#include <wchar.h>
+],
+[
+        wchar_t foo;
+        foo = 0;
+], bash_cv_type_wchar_t=yes, bash_cv_type_wchar_t=no)])
+if test $bash_cv_type_wchar_t = yes; then
+        AC_DEFINE(HAVE_WCHAR_T, 1, [systems should define this type here])
+fi
+
+dnl check for wctype_t in <wctype.h>
+AC_CACHE_CHECK([for wctype_t in wctype.h], bash_cv_type_wctype_t,
+[AC_TRY_COMPILE(
+[#include <wctype.h>],
+[
+        wctype_t foo;
+        foo = 0;
+], bash_cv_type_wctype_t=yes, bash_cv_type_wctype_t=no)])
+if test $bash_cv_type_wctype_t = yes; then
+        AC_DEFINE(HAVE_WCTYPE_T, 1, [systems should define this type here])
+fi
+
+dnl check for wint_t in <wctype.h>
+AC_CACHE_CHECK([for wint_t in wctype.h], bash_cv_type_wint_t,
+[AC_TRY_COMPILE(
+[#include <wctype.h>],
+[
+        wint_t foo;
+        foo = 0;
+], bash_cv_type_wint_t=yes, bash_cv_type_wint_t=no)])
+if test $bash_cv_type_wint_t = yes; then
+        AC_DEFINE(HAVE_WINT_T, 1, [systems should define this type here])
+fi
+
+dnl check for broken wcwidth
+AC_CACHE_CHECK([for wcwidth broken with unicode combining characters],
+bash_cv_wcwidth_broken,
+[AC_TRY_RUN([
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdio.h>
+
+#include <locale.h>
+#include <wchar.h>
+
+int
+main(c, v)
+int     c;
+char    **v;
+{
+        int     w;
+
+        setlocale(LC_ALL, "en_US.UTF-8");
+        w = wcwidth (0x0301);
+        exit (w == 0);  /* exit 0 if wcwidth broken */
+}
+],
+bash_cv_wcwidth_broken=yes, bash_cv_wcwidth_broken=no, bash_cv_wcwidth_broken=no)])
+if test "$bash_cv_wcwidth_broken" = yes; then
+        AC_DEFINE(WCWIDTH_BROKEN, 1, [wcwidth is usually not broken])
+fi
+
+if test "$am_cv_func_iconv" = yes; then
+	OLDLIBS="$LIBS"
+	LIBS="$LIBS $LIBINTL $LIBICONV"
+	AC_CHECK_FUNCS(locale_charset)
+	LIBS="$OLDLIBS"
+fi
+
+AC_CHECK_SIZEOF(wchar_t, 4)
+
+])
+
+dnl need: prefix exec_prefix libdir includedir CC TERMCAP_LIB
+dnl require:
+dnl	AC_PROG_CC
+dnl	BASH_CHECK_LIB_TERMCAP
+
+AC_DEFUN([RL_LIB_READLINE_VERSION],
+[
+AC_REQUIRE([BASH_CHECK_LIB_TERMCAP])
+
+AC_MSG_CHECKING([version of installed readline library])
+
+# What a pain in the ass this is.
+
+# save cpp and ld options
+_save_CFLAGS="$CFLAGS"
+_save_LDFLAGS="$LDFLAGS"
+_save_LIBS="$LIBS"
+
+# Don't set ac_cv_rl_prefix if the caller has already assigned a value.  This
+# allows the caller to do something like $_rl_prefix=$withval if the user
+# specifies --with-installed-readline=PREFIX as an argument to configure
+
+if test -z "$ac_cv_rl_prefix"; then
+test "x$prefix" = xNONE && ac_cv_rl_prefix=$ac_default_prefix || ac_cv_rl_prefix=${prefix}
+fi
+
+eval ac_cv_rl_includedir=${ac_cv_rl_prefix}/include
+eval ac_cv_rl_libdir=${ac_cv_rl_prefix}/lib
+
+LIBS="$LIBS -lreadline ${TERMCAP_LIB}"
+CFLAGS="$CFLAGS -I${ac_cv_rl_includedir}"
+LDFLAGS="$LDFLAGS -L${ac_cv_rl_libdir}"
+
+AC_CACHE_VAL(ac_cv_rl_version,
+[AC_TRY_RUN([
+#include <stdio.h>
+#include <readline/readline.h>
+#include <stdlib.h>
+
+extern int rl_gnu_readline_p;
+
+int
+main()
+{
+	FILE *fp;
+	fp = fopen("conftest.rlv", "w");
+	if (fp == 0)
+		exit(1);
+	if (rl_gnu_readline_p != 1)
+		fprintf(fp, "0.0\n");
+	else
+		fprintf(fp, "%s\n", rl_library_version ? rl_library_version : "0.0");
+	fclose(fp);
+	exit(0);
+}
+],
+ac_cv_rl_version=`cat conftest.rlv`,
+ac_cv_rl_version='0.0',
+ac_cv_rl_version='8.0')])
+
+CFLAGS="$_save_CFLAGS"
+LDFLAGS="$_save_LDFLAGS"
+LIBS="$_save_LIBS"
+
+RL_MAJOR=0
+RL_MINOR=0
+
+# (
+case "$ac_cv_rl_version" in
+2*|3*|4*|5*|6*|7*|8*|9*)
+	RL_MAJOR=`echo $ac_cv_rl_version | sed 's:\..*$::'`
+	RL_MINOR=`echo $ac_cv_rl_version | sed -e 's:^.*\.::' -e 's:[[a-zA-Z]]*$::'`
+	;;
+esac
+
+# (((
+case $RL_MAJOR in
+[[0-9][0-9]])	_RL_MAJOR=$RL_MAJOR ;;
+[[0-9]])	_RL_MAJOR=0$RL_MAJOR ;;
+*)		_RL_MAJOR=00 ;;
+esac
+
+# (((
+case $RL_MINOR in
+[[0-9][0-9]])	_RL_MINOR=$RL_MINOR ;;
+[[0-9]])	_RL_MINOR=0$RL_MINOR ;;
+*)		_RL_MINOR=00 ;;
+esac
+
+RL_VERSION="0x${_RL_MAJOR}${_RL_MINOR}"
+
+# Readline versions greater than 4.2 have these defines in readline.h
+
+if test $ac_cv_rl_version = '0.0' ; then
+	AC_MSG_WARN([Could not test version of installed readline library.])
+elif test $RL_MAJOR -gt 4 || { test $RL_MAJOR = 4 && test $RL_MINOR -gt 2 ; } ; then
+	# set these for use by the caller
+	RL_PREFIX=$ac_cv_rl_prefix
+	RL_LIBDIR=$ac_cv_rl_libdir
+	RL_INCLUDEDIR=$ac_cv_rl_includedir
+	AC_MSG_RESULT($ac_cv_rl_version)
+else
+
+AC_DEFINE_UNQUOTED(RL_READLINE_VERSION, $RL_VERSION, [encoded version of the installed readline library])
+AC_DEFINE_UNQUOTED(RL_VERSION_MAJOR, $RL_MAJOR, [major version of installed readline library])
+AC_DEFINE_UNQUOTED(RL_VERSION_MINOR, $RL_MINOR, [minor version of installed readline library])
+
+AC_SUBST(RL_VERSION)
+AC_SUBST(RL_MAJOR)
+AC_SUBST(RL_MINOR)
+
+# set these for use by the caller
+RL_PREFIX=$ac_cv_rl_prefix
+RL_LIBDIR=$ac_cv_rl_libdir
+RL_INCLUDEDIR=$ac_cv_rl_includedir
+
+AC_MSG_RESULT($ac_cv_rl_version)
+
+fi
+])
+
+AC_DEFUN(BASH_FUNC_CTYPE_NONASCII,
+[
+AC_MSG_CHECKING(whether the ctype macros accept non-ascii characters)
+AC_CACHE_VAL(bash_cv_func_ctype_nonascii,
+[AC_TRY_RUN([
+#ifdef HAVE_LOCALE_H
+#include <locale.h>
+#endif
+#include <stdio.h>
+#include <ctype.h>
+#include <stdlib.h>
+
+int
+main(c, v)
+int	c;
+char	*v[];
+{
+	char	*deflocale;
+	unsigned char x;
+	int	r1, r2;
+
+#ifdef HAVE_SETLOCALE
+	/* We take a shot here.  If that locale is not known, try the
+	   system default.  We try this one because '\342' (226) is
+	   known to be a printable character in that locale. */
+	deflocale = setlocale(LC_ALL, "en_US.ISO8859-1");
+	if (deflocale == 0)
+		deflocale = setlocale(LC_ALL, "");
+#endif
+
+	x = '\342';
+	r1 = isprint(x);
+	x -= 128;
+	r2 = isprint(x);
+	exit (r1 == 0 || r2 == 0);
+}
+], bash_cv_func_ctype_nonascii=yes, bash_cv_func_ctype_nonascii=no,
+   [AC_MSG_WARN(cannot check ctype macros if cross compiling -- defaulting to no)
+    bash_cv_func_ctype_nonascii=no]
+)])
+AC_MSG_RESULT($bash_cv_func_ctype_nonascii)
+if test $bash_cv_func_ctype_nonascii = yes; then
+AC_DEFINE(CTYPE_NON_ASCII)
+fi
+])
+
+AC_DEFUN(BASH_CHECK_WCONTINUED,
+[
+AC_MSG_CHECKING(whether WCONTINUED flag to waitpid is unavailable or available but broken)
+AC_CACHE_VAL(bash_cv_wcontinued_broken,
+[AC_TRY_RUN([
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <unistd.h>
+#include <errno.h>
+#include <stdlib.h>
+
+#ifndef errno
+extern int errno;
+#endif
+int
+main()
+{
+	int	x;
+
+	x = waitpid(-1, (int *)0, WNOHANG|WCONTINUED);
+	if (x == -1 && errno == EINVAL)
+		exit (1);
+	else
+		exit (0);
+}
+], bash_cv_wcontinued_broken=no,bash_cv_wcontinued_broken=yes,
+   [AC_MSG_WARN(cannot check WCONTINUED if cross compiling -- defaulting to no)
+    bash_cv_wcontinued_broken=no]
+)])
+AC_MSG_RESULT($bash_cv_wcontinued_broken)
+if test $bash_cv_wcontinued_broken = yes; then
+AC_DEFINE(WCONTINUED_BROKEN)
+fi
+])
+
+dnl
+dnl tests added for bashdb
+dnl
+
+
+AC_DEFUN([AM_PATH_LISPDIR],
+ [AC_ARG_WITH(lispdir, AC_HELP_STRING([--with-lispdir], [override the default lisp directory]),
+  [ lispdir="$withval" 
+    AC_MSG_CHECKING([where .elc files should go])
+    AC_MSG_RESULT([$lispdir])],
+  [
+  # If set to t, that means we are running in a shell under Emacs.
+  # If you have an Emacs named "t", then use the full path.
+  test x"$EMACS" = xt && EMACS=
+  AC_CHECK_PROGS(EMACS, emacs xemacs, no)
+  if test $EMACS != "no"; then
+    if test x${lispdir+set} != xset; then
+      AC_CACHE_CHECK([where .elc files should go], [am_cv_lispdir], [dnl
+	am_cv_lispdir=`$EMACS -batch -q -eval '(while load-path (princ (concat (car load-path) "\n")) (setq load-path (cdr load-path)))' | sed -n -e 's,/$,,' -e '/.*\/lib\/\(x\?emacs\/site-lisp\)$/{s,,${libdir}/\1,;p;q;}' -e '/.*\/share\/\(x\?emacs\/site-lisp\)$/{s,,${datadir}/\1,;p;q;}'`
+	if test -z "$am_cv_lispdir"; then
+	  am_cv_lispdir='${datadir}/emacs/site-lisp'
+	fi
+      ])
+      lispdir="$am_cv_lispdir"
+    fi
+  fi
+ ])
+ AC_SUBST(lispdir)
+])
+
+dnl From gnulib
+AC_DEFUN([BASH_FUNC_FPURGE],
+[
+  AC_CHECK_FUNCS_ONCE([fpurge])
+  AC_CHECK_FUNCS_ONCE([__fpurge])
+  AC_CHECK_DECLS([fpurge], , , [#include <stdio.h>])
+])
+
+AC_DEFUN([BASH_FUNC_SNPRINTF],
+[
+  AC_CHECK_FUNCS_ONCE([snprintf])
+  if test X$ac_cv_func_snprintf = Xyes; then
+    AC_CACHE_CHECK([for standard-conformant snprintf], [bash_cv_func_snprintf],
+      [AC_TRY_RUN([
+#include <stdio.h>
+#include <stdlib.h>
+
+int
+main()
+{
+  int n;
+  n = snprintf (0, 0, "%s", "0123456");
+  exit(n != 7);
+}
+], bash_cv_func_snprintf=yes, bash_cv_func_snprintf=no,
+   [AC_MSG_WARN([cannot check standard snprintf if cross-compiling])
+    bash_cv_func_snprintf=yes]
+)])
+    if test $bash_cv_func_snprintf = no; then
+      ac_cv_func_snprintf=no
+    fi
+  fi
+  if test $ac_cv_func_snprintf = no; then
+    AC_DEFINE(HAVE_SNPRINTF, 0,
+      [Define if you have a standard-conformant snprintf function.])
+  fi
+])
+
+AC_DEFUN([BASH_FUNC_VSNPRINTF],
+[
+  AC_CHECK_FUNCS_ONCE([vsnprintf])
+  if test X$ac_cv_func_vsnprintf = Xyes; then
+    AC_CACHE_CHECK([for standard-conformant vsnprintf], [bash_cv_func_vsnprintf],
+      [AC_TRY_RUN([
+#if HAVE_STDARG_H
+#include <stdarg.h>
+#else
+#include <varargs.h>
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+
+static int
+#if HAVE_STDARG_H
+foo(const char *fmt, ...)
+#else
+foo(format, va_alist)
+     const char *format;
+     va_dcl
+#endif
+{
+  va_list args;
+  int n;
+
+#if HAVE_STDARG_H
+  va_start(args, fmt);
+#else
+  va_start(args);
+#endif
+  n = vsnprintf(0, 0, fmt, args);
+  va_end (args);
+  return n;
+}
+
+int
+main()
+{
+  int n;
+  n = foo("%s", "0123456");
+  exit(n != 7);
+}
+], bash_cv_func_vsnprintf=yes, bash_cv_func_vsnprintf=no,
+   [AC_MSG_WARN([cannot check standard vsnprintf if cross-compiling])
+    bash_cv_func_vsnprintf=yes]
+)])
+    if test $bash_cv_func_vsnprintf = no; then
+      ac_cv_func_vsnprintf=no
+    fi
+  fi
+  if test $ac_cv_func_vsnprintf = no; then
+    AC_DEFINE(HAVE_VSNPRINTF, 0,
+      [Define if you have a standard-conformant vsnprintf function.])
+  fi
+])
+
+AC_DEFUN(BASH_STRUCT_WEXITSTATUS_OFFSET,
+[AC_MSG_CHECKING(for offset of exit status in return status from wait)
+AC_CACHE_VAL(bash_cv_wexitstatus_offset,
+[AC_TRY_RUN([
+#include <stdlib.h>
+#include <unistd.h>
+
+#include <sys/wait.h>
+
+int
+main(c, v)
+     int c;
+     char **v;
+{
+  pid_t pid, p;
+  int s, i, n;
+
+  s = 0;
+  pid = fork();
+  if (pid == 0)
+    exit (42);
+
+  /* wait for the process */
+  p = wait(&s);
+  if (p != pid)
+    exit (255);
+
+  /* crack s */
+  for (i = 0; i < (sizeof(s) * 8); i++)
+    {
+      n = (s >> i) & 0xff;
+      if (n == 42)
+	exit (i);
+    }
+
+  exit (254);
+}
+], bash_cv_wexitstatus_offset=0, bash_cv_wexitstatus_offset=$?,
+   [AC_MSG_WARN(cannot check WEXITSTATUS offset if cross compiling -- defaulting to 0)
+    bash_cv_wexitstatus_offset=0]
+)])
+if test "$bash_cv_wexitstatus_offset" -gt 32 ; then
+  AC_MSG_WARN(bad exit status from test program -- defaulting to 0)
+  bash_cv_wexitstatus_offset=0
+fi
+AC_MSG_RESULT($bash_cv_wexitstatus_offset)
+AC_DEFINE_UNQUOTED([WEXITSTATUS_OFFSET], [$bash_cv_wexitstatus_offset], [Offset of exit status in wait status word])
+])
+
+AC_DEFUN([BASH_FUNC_SBRK],
+[
+  AC_MSG_CHECKING([for sbrk])
+  AC_CACHE_VAL(ac_cv_func_sbrk,
+  [AC_TRY_LINK([#include <unistd.h>],
+  [ void *x = sbrk (4096); ],
+  ac_cv_func_sbrk=yes, ac_cv_func_sbrk=no)])
+  AC_MSG_RESULT($ac_cv_func_sbrk)
+  if test X$ac_cv_func_sbrk = Xyes; then
+    AC_CACHE_CHECK([for working sbrk], [bash_cv_func_sbrk],
+      [AC_TRY_RUN([
+#include <stdlib.h>
+#include <unistd.h>
+
+int
+main(int c, char **v)
+{
+	void *x;
+
+	x = sbrk (4096);
+	exit ((x == (void *)-1) ? 1 : 0);
+}
+], bash_cv_func_sbrk=yes, bash_cv_func_snprintf=sbrk,
+   [AC_MSG_WARN([cannot check working sbrk if cross-compiling])
+    bash_cv_func_sbrk=yes]
+)])
+    if test $bash_cv_func_sbrk = no; then
+      ac_cv_func_sbrk=no
+    fi
+  fi
+  if test $ac_cv_func_sbrk = yes; then
+    AC_DEFINE(HAVE_SBRK, 1,
+      [Define if you have a working sbrk function.])
+  fi
+])
+
+AC_DEFUN(BASH_FUNC_FNMATCH_EQUIV_FALLBACK,
+[AC_MSG_CHECKING(whether fnmatch can be used to check bracket equivalence classes)
+AC_CACHE_VAL(bash_cv_fnmatch_equiv_fallback,
+[AC_TRY_RUN([
+#include <stdlib.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <fnmatch.h>
+#include <locale.h>
+
+char *pattern = "[[=a=]]";
+
+/* char *string = "ä"; */
+unsigned char string[4] = { '\xc3', '\xa4', '\0' };
+
+int
+main (int c, char **v)
+{
+  setlocale (LC_ALL, "en_US.UTF-8");
+  if (fnmatch (pattern, (const char *)string, 0) != FNM_NOMATCH)
+    exit (0);
+  exit (1);
+}
+
+], bash_cv_fnmatch_equiv_fallback=yes, bash_cv_fnmatch_equiv_fallback=no,
+   [AC_MSG_WARN(cannot check fnmatch if cross compiling -- defaulting to no)
+    bash_cv_fnmatch_equiv_fallback=no]
+)])
+AC_MSG_RESULT($bash_cv_fnmatch_equiv_fallback)
+if test "$bash_cv_fnmatch_equiv_fallback" = "yes" ; then
+    bash_cv_fnmatch_equiv_value=1
+else
+    bash_cv_fnmatch_equiv_value=0
+fi
+AC_DEFINE_UNQUOTED([FNMATCH_EQUIV_FALLBACK], [$bash_cv_fnmatch_equiv_value], [Whether fnmatch can be used for bracket equivalence classes])
+])
diff --git a/alias.c b/alias.c
new file mode 100644
index 0000000..cd5e99b
--- /dev/null
+++ b/alias.c
@@ -0,0 +1,594 @@
+/* alias.c -- Not a full alias, but just the kind that we use in the
+   shell.  Csh style alias is somewhere else (`over there, in a box'). */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#if defined (ALIAS)
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include "chartypes.h"
+#include "bashansi.h"
+#include "command.h"
+#include "general.h"
+#include "externs.h"
+#include "alias.h"
+
+#if defined (PROGRAMMABLE_COMPLETION)
+#  include "pcomplete.h"
+#endif
+
+#if defined (HAVE_MBSTR_H) && defined (HAVE_MBSCHR)
+#  include <mbstr.h>		/* mbschr */
+#endif
+
+#define ALIAS_HASH_BUCKETS	64	/* must be power of two */
+
+typedef int sh_alias_map_func_t PARAMS((alias_t *));
+
+static void free_alias_data PARAMS((PTR_T));
+static alias_t **map_over_aliases PARAMS((sh_alias_map_func_t *));
+static void sort_aliases PARAMS((alias_t **));
+static int qsort_alias_compare PARAMS((alias_t **, alias_t **));
+
+#if defined (READLINE)
+static int skipquotes PARAMS((char *, int));
+static int skipws PARAMS((char *, int));
+static int rd_token PARAMS((char *, int));
+#endif
+
+/* Non-zero means expand all words on the line.  Otherwise, expand
+   after first expansion if the expansion ends in a space. */
+int alias_expand_all = 0;
+
+/* The list of aliases that we have. */
+HASH_TABLE *aliases = (HASH_TABLE *)NULL;
+
+void
+initialize_aliases ()
+{
+  if (aliases == 0)
+    aliases = hash_create (ALIAS_HASH_BUCKETS);
+}
+
+/* Scan the list of aliases looking for one with NAME.  Return NULL
+   if the alias doesn't exist, else a pointer to the alias_t. */
+alias_t *
+find_alias (name)
+     char *name;
+{
+  BUCKET_CONTENTS *al;
+
+  if (aliases == 0)
+    return ((alias_t *)NULL);
+
+  al = hash_search (name, aliases, 0);
+  return (al ? (alias_t *)al->data : (alias_t *)NULL);
+}
+
+/* Return the value of the alias for NAME, or NULL if there is none. */
+char *
+get_alias_value (name)
+     char *name;
+{
+  alias_t *alias;
+
+  if (aliases == 0)
+    return ((char *)NULL);
+
+  alias = find_alias (name);
+  return (alias ? alias->value : (char *)NULL);
+}
+
+/* Make a new alias from NAME and VALUE.  If NAME can be found,
+   then replace its value. */
+void
+add_alias (name, value)
+     char *name, *value;
+{
+  BUCKET_CONTENTS *elt;
+  alias_t *temp;
+  int n;
+
+  if (aliases == 0)
+    {
+      initialize_aliases ();
+      temp = (alias_t *)NULL;
+    }
+  else
+    temp = find_alias (name);
+
+  if (temp)
+    {
+      free (temp->value);
+      temp->value = savestring (value);
+      temp->flags &= ~AL_EXPANDNEXT;
+      if (value[0])
+	{
+	  n = value[strlen (value) - 1];
+	  if (n == ' ' || n == '\t')
+	    temp->flags |= AL_EXPANDNEXT;
+	}
+    }
+  else
+    {
+      temp = (alias_t *)xmalloc (sizeof (alias_t));
+      temp->name = savestring (name);
+      temp->value = savestring (value);
+      temp->flags = 0;
+
+      if (value[0])
+	{
+	  n = value[strlen (value) - 1];
+	  if (n == ' ' || n == '\t')
+	    temp->flags |= AL_EXPANDNEXT;
+	}
+
+      elt = hash_insert (savestring (name), aliases, HASH_NOSRCH);
+      elt->data = temp;
+#if defined (PROGRAMMABLE_COMPLETION)
+      set_itemlist_dirty (&it_aliases);
+#endif
+    }
+}
+
+/* Delete a single alias structure. */
+static void
+free_alias_data (data)
+     PTR_T data;
+{
+  register alias_t *a;
+
+  a = (alias_t *)data;
+
+  if (a->flags & AL_BEINGEXPANDED)
+    clear_string_list_expander (a);	/* call back to the parser */
+
+  free (a->value);
+  free (a->name);
+  free (data);
+}
+
+/* Remove the alias with name NAME from the alias table.  Returns
+   the number of aliases left in the table, or -1 if the alias didn't
+   exist. */
+int
+remove_alias (name)
+     char *name;
+{
+  BUCKET_CONTENTS *elt;
+
+  if (aliases == 0)
+    return (-1);
+
+  elt = hash_remove (name, aliases, 0);
+  if (elt)
+    {
+      free_alias_data (elt->data);
+      free (elt->key);		/* alias name */
+      free (elt);		/* XXX */
+#if defined (PROGRAMMABLE_COMPLETION)
+      set_itemlist_dirty (&it_aliases);
+#endif
+      return (aliases->nentries);
+    }
+  return (-1);
+}
+
+/* Delete all aliases. */
+void
+delete_all_aliases ()
+{
+  if (aliases == 0)
+    return;
+
+  hash_flush (aliases, free_alias_data);
+  hash_dispose (aliases);
+  aliases = (HASH_TABLE *)NULL;
+#if defined (PROGRAMMABLE_COMPLETION)
+  set_itemlist_dirty (&it_aliases);
+#endif
+}
+
+/* Return an array of aliases that satisfy the conditions tested by FUNCTION.
+   If FUNCTION is NULL, return all aliases. */
+static alias_t **
+map_over_aliases (function)
+     sh_alias_map_func_t *function;
+{
+  register int i;
+  register BUCKET_CONTENTS *tlist;
+  alias_t *alias, **list;
+  int list_index;
+
+  i = HASH_ENTRIES (aliases);
+  if (i == 0)
+    return ((alias_t **)NULL);
+
+  list = (alias_t **)xmalloc ((i + 1) * sizeof (alias_t *));
+  for (i = list_index = 0; i < aliases->nbuckets; i++)
+    {
+      for (tlist = hash_items (i, aliases); tlist; tlist = tlist->next)
+	{
+	  alias = (alias_t *)tlist->data;
+
+	  if (!function || (*function) (alias))
+	    {
+	      list[list_index++] = alias;
+	      list[list_index] = (alias_t *)NULL;
+	    }
+	}
+    }
+  return (list);
+}
+
+static void
+sort_aliases (array)
+     alias_t **array;
+{
+  qsort (array, strvec_len ((char **)array), sizeof (alias_t *), (QSFUNC *)qsort_alias_compare);
+}
+
+static int
+qsort_alias_compare (as1, as2)
+     alias_t **as1, **as2;
+{
+  int result;
+
+  if ((result = (*as1)->name[0] - (*as2)->name[0]) == 0)
+    result = strcmp ((*as1)->name, (*as2)->name);
+
+  return (result);
+}
+
+/* Return a sorted list of all defined aliases */
+alias_t **
+all_aliases ()
+{
+  alias_t **list;
+
+  if (aliases == 0 || HASH_ENTRIES (aliases) == 0)
+    return ((alias_t **)NULL);
+
+  list = map_over_aliases ((sh_alias_map_func_t *)NULL);
+  if (list)
+    sort_aliases (list);
+  return (list);
+}
+
+char *
+alias_expand_word (s)
+     char *s;
+{
+  alias_t *r;
+
+  r = find_alias (s);
+  return (r ? savestring (r->value) : (char *)NULL);
+}
+
+/* Readline support functions -- expand all aliases in a line. */
+
+#if defined (READLINE)
+
+/* Return non-zero if CHARACTER is a member of the class of characters
+   that are self-delimiting in the shell (this really means that these
+   characters delimit tokens). */
+#define self_delimiting(character) (member ((character), " \t\n\r;|&()"))
+
+/* Return non-zero if CHARACTER is a member of the class of characters
+   that delimit commands in the shell. */
+#define command_separator(character) (member ((character), "\r\n;|&("))
+
+/* If this is 1, we are checking the next token read for alias expansion
+   because it is the first word in a command. */
+static int command_word;
+
+/* This is for skipping quoted strings in alias expansions. */
+#define quote_char(c)  (((c) == '\'') || ((c) == '"'))
+
+/* Consume a quoted string from STRING, starting at string[START] (so
+   string[START] is the opening quote character), and return the index
+   of the closing quote character matching the opening quote character.
+   This handles single matching pairs of unquoted quotes; it could afford
+   to be a little smarter... This skips words between balanced pairs of
+   quotes, words where the first character is quoted with a `\', and other
+   backslash-escaped characters. */
+
+static int
+skipquotes (string, start)
+     char *string;
+     int start;
+{
+  register int i;
+  int delimiter = string[start];
+
+  /* i starts at START + 1 because string[START] is the opening quote
+     character. */
+  for (i = start + 1 ; string[i] ; i++)
+    {
+      if (string[i] == '\\')
+	{
+	  i++;		/* skip backslash-quoted quote characters, too */
+	  if (string[i] == 0)
+	    break;
+	  continue;
+	}
+
+      if (string[i] == delimiter)
+	return i;
+    }
+  return (i);
+}
+
+/* Skip the white space and any quoted characters in STRING, starting at
+   START.  Return the new index into STRING, after zero or more characters
+   have been skipped. */
+static int
+skipws (string, start)
+     char *string;
+     int start;
+{
+  register int i;
+  int pass_next, backslash_quoted_word;
+  unsigned char peekc;
+
+  /* skip quoted strings, in ' or ", and words in which a character is quoted
+     with a `\'. */
+  i = backslash_quoted_word = pass_next = 0;
+
+  /* Skip leading whitespace (or separator characters), and quoted words.
+     But save it in the output.  */
+
+  for (i = start; string[i]; i++)
+    {
+      if (pass_next)
+	{
+	  pass_next = 0;
+	  continue;
+	}
+
+      if (whitespace (string[i]))
+	{
+	  backslash_quoted_word = 0; /* we are no longer in a backslash-quoted word */
+	  continue;
+	}
+
+      if (string[i] == '\\')
+	{
+	  peekc = string[i+1];
+	  if (peekc == 0)
+	    break;
+	  if (ISLETTER (peekc))
+	    backslash_quoted_word++;	/* this is a backslash-quoted word */
+	  else
+	    pass_next++;
+	  continue;
+	}
+
+      /* This only handles single pairs of non-escaped quotes.  This
+	 overloads backslash_quoted_word to also mean that a word like
+	 ""f is being scanned, so that the quotes will inhibit any expansion
+	 of the word. */
+      if (quote_char(string[i]))
+	{
+	  i = skipquotes (string, i);
+	  /* This could be a line that contains a single quote character,
+	     in which case skipquotes () terminates with string[i] == '\0'
+	     (the end of the string).  Check for that here. */
+	  if (string[i] == '\0')
+	    break;
+
+	  peekc = string[i + 1];
+	  if (ISLETTER (peekc))
+	    backslash_quoted_word++;
+	  continue;
+	}
+
+      /* If we're in the middle of some kind of quoted word, let it
+	 pass through. */
+      if (backslash_quoted_word)
+	continue;
+
+      /* If this character is a shell command separator, then set a hint for
+	 alias_expand that the next token is the first word in a command. */
+
+      if (command_separator (string[i]))
+	{
+	  command_word++;
+	  continue;
+	}
+      break;
+    }
+  return (i);
+}
+
+/* Characters that may appear in a token.  Basically, anything except white
+   space and a token separator. */
+#define token_char(c)	(!((whitespace (string[i]) || self_delimiting (string[i]))))
+
+/* Read from START in STRING until the next separator character, and return
+   the index of that separator.  Skip backslash-quoted characters.  Call
+   skipquotes () for quoted strings in the middle or at the end of tokens,
+   so all characters show up (e.g. foo'' and foo""bar) */
+static int
+rd_token (string, start)
+     char *string;
+     int start;
+{
+  register int i;
+
+  /* From here to next separator character is a token. */
+  for (i = start; string[i] && token_char (string[i]); i++)
+    {
+      if (string[i] == '\\')
+	{
+	  i++;	/* skip backslash-escaped character */
+	  if (string[i] == 0)
+	    break;
+	  continue;
+	}
+
+      /* If this character is a quote character, we want to call skipquotes
+	 to get the whole quoted portion as part of this word.  That word
+	 will not generally match an alias, even if te unquoted word would
+	 have.  The presence of the quotes in the token serves then to
+	 inhibit expansion. */
+      if (quote_char (string[i]))
+	{
+	  i = skipquotes (string, i);
+	  /* This could be a line that contains a single quote character,
+	     in which case skipquotes () terminates with string[i] == '\0'
+	     (the end of the string).  Check for that here. */
+	  if (string[i] == '\0')
+	    break;
+
+	  /* Now string[i] is the matching quote character, and the
+	     quoted portion of the token has been scanned. */
+	  continue;
+	}
+    }
+  return (i);
+}
+
+/* Return a new line, with any aliases substituted. */
+char *
+alias_expand (string)
+     char *string;
+{
+  register int i, j, start;
+  char *line, *token;
+  int line_len, tl, real_start, expand_next, expand_this_token;
+  alias_t *alias;
+
+  line_len = strlen (string) + 1;
+  line = (char *)xmalloc (line_len);
+  token = (char *)xmalloc (line_len);
+
+  line[0] = i = 0;
+  expand_next = 0;
+  command_word = 1; /* initialized to expand the first word on the line */
+
+  /* Each time through the loop we find the next word in line.  If it
+     has an alias, substitute the alias value.  If the value ends in ` ',
+     then try again with the next word.  Else, if there is no value, or if
+     the value does not end in space, we are done. */
+
+  for (;;)
+    {
+
+      token[0] = 0;
+      start = i;
+
+      /* Skip white space and quoted characters */
+      i = skipws (string, start);
+
+      if (start == i && string[i] == '\0')
+	{
+	  free (token);
+	  return (line);
+	}
+
+      /* copy the just-skipped characters into the output string,
+	 expanding it if there is not enough room. */
+      j = strlen (line);
+      tl = i - start;	/* number of characters just skipped */
+      RESIZE_MALLOCED_BUFFER (line, j, (tl + 1), line_len, (tl + 50));
+      strncpy (line + j, string + start, tl);
+      line[j + tl] = '\0';
+
+      real_start = i;
+
+      command_word = command_word || (command_separator (string[i]));
+      expand_this_token = (command_word || expand_next);
+      expand_next = 0;
+
+      /* Read the next token, and copy it into TOKEN. */
+      start = i;
+      i = rd_token (string, start);
+
+      tl = i - start;	/* token length */
+
+      /* If tl == 0, but we're not at the end of the string, then we have a
+	 single-character token, probably a delimiter */
+      if (tl == 0 && string[i] != '\0')
+	{
+	  tl = 1;
+	  i++;		/* move past it */
+	}
+
+      strncpy (token, string + start, tl);
+      token [tl] = '\0';
+
+      /* If there is a backslash-escaped character quoted in TOKEN,
+	 then we don't do alias expansion.  This should check for all
+	 other quoting characters, too. */
+      if (mbschr (token, '\\'))
+	expand_this_token = 0;
+
+      /* If we should be expanding here, if we are expanding all words, or if
+	 we are in a location in the string where an expansion is supposed to
+	 take place, see if this word has a substitution.  If it does, then do
+	 the expansion.  Note that we defer the alias value lookup until we
+	 are sure we are expanding this token. */
+
+      if ((token[0]) &&
+	  (expand_this_token || alias_expand_all) &&
+	  (alias = find_alias (token)))
+	{
+	  char *v;
+	  int vlen, llen;
+
+	  v = alias->value;
+	  vlen = strlen (v);
+	  llen = strlen (line);
+
+	  /* +3 because we possibly add one more character below. */
+	  RESIZE_MALLOCED_BUFFER (line, llen, (vlen + 3), line_len, (vlen + 50));
+
+	  strcpy (line + llen, v);
+
+	  if ((expand_this_token && vlen && whitespace (v[vlen - 1])) ||
+	      alias_expand_all)
+	    expand_next = 1;
+	}
+      else
+	{
+	  int llen, tlen;
+
+	  llen = strlen (line);
+	  tlen = i - real_start; /* tlen == strlen(token) */
+
+	  RESIZE_MALLOCED_BUFFER (line, llen, (tlen + 1), line_len, (llen + tlen + 50));
+
+	  strncpy (line + llen, string + real_start, tlen);
+	  line[llen + tlen] = '\0';
+	}
+      command_word = 0;
+    }
+}
+#endif /* READLINE */
+#endif /* ALIAS */
diff --git a/alias.h b/alias.h
new file mode 100644
index 0000000..4e2d67c
--- /dev/null
+++ b/alias.h
@@ -0,0 +1,73 @@
+/* alias.h -- structure definitions. */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_ALIAS_H_)
+#define _ALIAS_H_
+
+#include "stdc.h"
+
+#include "hashlib.h"
+
+typedef struct alias {
+  char *name;
+  char *value;
+  char flags;
+} alias_t;
+
+/* Values for `flags' member of struct alias. */
+#define AL_EXPANDNEXT		0x1
+#define AL_BEINGEXPANDED	0x2
+
+/* The list of known aliases. */
+extern HASH_TABLE *aliases;
+
+extern void initialize_aliases PARAMS((void));
+
+/* Scan the list of aliases looking for one with NAME.  Return NULL
+   if the alias doesn't exist, else a pointer to the alias. */
+extern alias_t *find_alias PARAMS((char *));
+
+/* Return the value of the alias for NAME, or NULL if there is none. */
+extern char *get_alias_value PARAMS((char *));
+
+/* Make a new alias from NAME and VALUE.  If NAME can be found,
+   then replace its value. */
+extern void add_alias PARAMS((char *, char *));
+
+/* Remove the alias with name NAME from the alias list.  Returns
+   the index of the removed alias, or -1 if the alias didn't exist. */
+extern int remove_alias PARAMS((char *));
+
+/* Remove all aliases. */
+extern void delete_all_aliases PARAMS((void));
+
+/* Return an array of all defined aliases. */
+extern alias_t **all_aliases PARAMS((void));
+
+/* Expand a single word for aliases. */
+extern char *alias_expand_word PARAMS((char *));
+
+/* Return a new line, with any aliases expanded. */
+extern char *alias_expand PARAMS((char *));
+
+/* Helper definition for the parser */
+extern void clear_string_list_expander PARAMS((alias_t *));
+
+#endif /* _ALIAS_H_ */
diff --git a/array.c b/array.c
new file mode 100644
index 0000000..6d3554b
--- /dev/null
+++ b/array.c
@@ -0,0 +1,1236 @@
+/*
+ * array.c - functions to create, destroy, access, and manipulate arrays
+ *	     of strings.
+ *
+ * Arrays are sparse doubly-linked lists.  An element's index is stored
+ * with it.
+ *
+ * Chet Ramey
+ * chet@ins.cwru.edu
+ */
+
+/* Copyright (C) 1997-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#if defined (ARRAY_VARS)
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include "bashansi.h"
+
+#include "shell.h"
+#include "array.h"
+#include "builtins/common.h"
+
+#define ADD_BEFORE(ae, new) \
+	do { \
+		ae->prev->next = new; \
+		new->prev = ae->prev; \
+		ae->prev = new; \
+		new->next = ae; \
+	} while(0)
+	
+#define ADD_AFTER(ae, new) \
+	do { \
+		ae->next->prev = new; \
+		new->next = ae->next; \
+		new->prev = ae; \
+		ae->next = new; \
+	} while (0)
+
+static char *array_to_string_internal PARAMS((ARRAY_ELEMENT *, ARRAY_ELEMENT *, char *, int));
+
+static char *spacesep = " ";
+
+#define IS_LASTREF(a)	(a->lastref)
+
+#define LASTREF_START(a, i) \
+	(IS_LASTREF(a) && i >= element_index(a->lastref)) ? a->lastref \
+						          : element_forw(a->head)
+
+#define LASTREF(a)	(a->lastref ? a->lastref : element_forw(a->head))
+
+#define INVALIDATE_LASTREF(a)	a->lastref = 0
+#define SET_LASTREF(a, e)	a->lastref = (e)
+#define UNSET_LASTREF(a)	a->lastref = 0;
+
+ARRAY *
+array_create()
+{
+	ARRAY	*r;
+	ARRAY_ELEMENT	*head;
+
+	r = (ARRAY *)xmalloc(sizeof(ARRAY));
+	r->type = array_indexed;
+	r->max_index = -1;
+	r->num_elements = 0;
+	r->lastref = (ARRAY_ELEMENT *)0;
+	head = array_create_element(-1, (char *)NULL);	/* dummy head */
+	head->prev = head->next = head;
+	r->head = head;
+	return(r);
+}
+
+void
+array_flush (a)
+ARRAY	*a;
+{
+	register ARRAY_ELEMENT *r, *r1;
+
+	if (a == 0)
+		return;
+	for (r = element_forw(a->head); r != a->head; ) {
+		r1 = element_forw(r);
+		array_dispose_element(r);
+		r = r1;
+	}
+	a->head->next = a->head->prev = a->head;
+	a->max_index = -1;
+	a->num_elements = 0;
+	INVALIDATE_LASTREF(a);
+}
+
+void
+array_dispose(a)
+ARRAY	*a;
+{
+	if (a == 0)
+		return;
+	array_flush (a);
+	array_dispose_element(a->head);
+	free(a);
+}
+
+ARRAY *
+array_copy(a)
+ARRAY	*a;
+{
+	ARRAY	*a1;
+	ARRAY_ELEMENT	*ae, *new;
+
+	if (a == 0)
+		return((ARRAY *) NULL);
+	a1 = array_create();
+	a1->type = a->type;
+	a1->max_index = a->max_index;
+	a1->num_elements = a->num_elements;
+	for (ae = element_forw(a->head); ae != a->head; ae = element_forw(ae)) {
+		new = array_create_element(element_index(ae), element_value(ae));
+		ADD_BEFORE(a1->head, new);
+		if (ae == LASTREF(a))
+			SET_LASTREF(a1, new);
+	}
+	return(a1);
+}
+
+/*
+ * Make and return a new array composed of the elements in array A from
+ * S to E, inclusive.
+ */
+ARRAY *
+array_slice(array, s, e)
+ARRAY		*array;
+ARRAY_ELEMENT	*s, *e;
+{
+	ARRAY	*a;
+	ARRAY_ELEMENT *p, *n;
+	int	i;
+	arrayind_t mi;
+
+	a = array_create ();
+	a->type = array->type;
+
+	for (mi = 0, p = s, i = 0; p != e; p = element_forw(p), i++) {
+		n = array_create_element (element_index(p), element_value(p));
+		ADD_BEFORE(a->head, n);
+		mi = element_index(n);
+	}
+	a->num_elements = i;
+	a->max_index = mi;
+	return a;
+}
+
+/*
+ * Walk the array, calling FUNC once for each element, with the array
+ * element as the argument.
+ */
+void
+array_walk(a, func, udata)
+ARRAY	*a;
+sh_ae_map_func_t *func;
+void	*udata;
+{
+	register ARRAY_ELEMENT *ae;
+
+	if (a == 0 || array_empty(a))
+		return;
+	for (ae = element_forw(a->head); ae != a->head; ae = element_forw(ae))
+		if ((*func)(ae, udata) < 0)
+			return;
+}
+
+/*
+ * Shift the array A N elements to the left.  Delete the first N elements
+ * and subtract N from the indices of the remaining elements.  If FLAGS
+ * does not include AS_DISPOSE, this returns a singly-linked null-terminated
+ * list of elements so the caller can dispose of the chain.  If FLAGS
+ * includes AS_DISPOSE, this function disposes of the shifted-out elements
+ * and returns NULL.
+ */
+ARRAY_ELEMENT *
+array_shift(a, n, flags)
+ARRAY	*a;
+int	n, flags;
+{
+	register ARRAY_ELEMENT *ae, *ret;
+	register int i;
+
+	if (a == 0 || array_empty(a) || n <= 0)
+		return ((ARRAY_ELEMENT *)NULL);
+
+	INVALIDATE_LASTREF(a);
+	for (i = 0, ret = ae = element_forw(a->head); ae != a->head && i < n; ae = element_forw(ae), i++)
+		;
+	if (ae == a->head) {
+		/* Easy case; shifting out all of the elements */
+		if (flags & AS_DISPOSE) {
+			array_flush (a);
+			return ((ARRAY_ELEMENT *)NULL);
+		}
+		for (ae = ret; element_forw(ae) != a->head; ae = element_forw(ae))
+			;
+		element_forw(ae) = (ARRAY_ELEMENT *)NULL;
+		a->head->next = a->head->prev = a->head;
+		a->max_index = -1;
+		a->num_elements = 0;
+		return ret;
+	}
+	/*
+	 * ae now points to the list of elements we want to retain.
+	 * ret points to the list we want to either destroy or return.
+	 */
+	ae->prev->next = (ARRAY_ELEMENT *)NULL;		/* null-terminate RET */
+
+	a->head->next = ae;		/* slice RET out of the array */
+	ae->prev = a->head;
+
+	for ( ; ae != a->head; ae = element_forw(ae))
+		element_index(ae) -= n;	/* renumber retained indices */
+
+	a->num_elements -= n;		/* modify bookkeeping information */
+	a->max_index = element_index(a->head->prev);
+
+	if (flags & AS_DISPOSE) {
+		for (ae = ret; ae; ) {
+			ret = element_forw(ae);
+			array_dispose_element(ae);
+			ae = ret;
+		}
+		return ((ARRAY_ELEMENT *)NULL);
+	}
+
+	return ret;
+}
+
+/*
+ * Shift array A right N indices.  If S is non-null, it becomes the value of
+ * the new element 0.  Returns the number of elements in the array after the
+ * shift.
+ */
+int
+array_rshift (a, n, s)
+ARRAY	*a;
+int	n;
+char	*s;
+{
+	register ARRAY_ELEMENT	*ae, *new;
+
+	if (a == 0 || (array_empty(a) && s == 0))
+		return 0;
+	else if (n <= 0)
+		return (a->num_elements);
+
+	ae = element_forw(a->head);
+	if (s) {
+		new = array_create_element(0, s);
+		ADD_BEFORE(ae, new);
+		a->num_elements++;
+		if (array_num_elements(a) == 1)	{	/* array was empty */
+			a->max_index = 0;
+			return 1;
+		}
+	}
+
+	/*
+	 * Renumber all elements in the array except the one we just added.
+	 */
+	for ( ; ae != a->head; ae = element_forw(ae))
+		element_index(ae) += n;
+
+	a->max_index = element_index(a->head->prev);
+
+	INVALIDATE_LASTREF(a);
+	return (a->num_elements);
+}
+
+ARRAY_ELEMENT *
+array_unshift_element(a)
+ARRAY	*a;
+{
+	return (array_shift (a, 1, 0));
+}
+
+int
+array_shift_element(a, v)
+ARRAY	*a;
+char	*v;
+{
+	return (array_rshift (a, 1, v));
+}
+
+ARRAY *
+array_quote(array)
+ARRAY	*array;
+{
+	ARRAY_ELEMENT	*a;
+	char	*t;
+
+	if (array == 0 || array_head(array) == 0 || array_empty(array))
+		return (ARRAY *)NULL;
+	for (a = element_forw(array->head); a != array->head; a = element_forw(a)) {
+		t = quote_string (a->value);
+		FREE(a->value);
+		a->value = t;
+	}
+	return array;
+}
+
+ARRAY *
+array_quote_escapes(array)
+ARRAY	*array;
+{
+	ARRAY_ELEMENT	*a;
+	char	*t;
+
+	if (array == 0 || array_head(array) == 0 || array_empty(array))
+		return (ARRAY *)NULL;
+	for (a = element_forw(array->head); a != array->head; a = element_forw(a)) {
+		t = quote_escapes (a->value);
+		FREE(a->value);
+		a->value = t;
+	}
+	return array;
+}
+
+ARRAY *
+array_dequote(array)
+ARRAY	*array;
+{
+	ARRAY_ELEMENT	*a;
+	char	*t;
+
+	if (array == 0 || array_head(array) == 0 || array_empty(array))
+		return (ARRAY *)NULL;
+	for (a = element_forw(array->head); a != array->head; a = element_forw(a)) {
+		t = dequote_string (a->value);
+		FREE(a->value);
+		a->value = t;
+	}
+	return array;
+}
+
+ARRAY *
+array_dequote_escapes(array)
+ARRAY	*array;
+{
+	ARRAY_ELEMENT	*a;
+	char	*t;
+
+	if (array == 0 || array_head(array) == 0 || array_empty(array))
+		return (ARRAY *)NULL;
+	for (a = element_forw(array->head); a != array->head; a = element_forw(a)) {
+		t = dequote_escapes (a->value);
+		FREE(a->value);
+		a->value = t;
+	}
+	return array;
+}
+
+ARRAY *
+array_remove_quoted_nulls(array)
+ARRAY	*array;
+{
+	ARRAY_ELEMENT	*a;
+
+	if (array == 0 || array_head(array) == 0 || array_empty(array))
+		return (ARRAY *)NULL;
+	for (a = element_forw(array->head); a != array->head; a = element_forw(a))
+		a->value = remove_quoted_nulls (a->value);
+	return array;
+}
+
+/*
+ * Return a string whose elements are the members of array A beginning at
+ * index START and spanning NELEM members.  Null elements are counted.
+ * Since arrays are sparse, unset array elements are not counted.
+ */
+char *
+array_subrange (a, start, nelem, starsub, quoted, pflags)
+ARRAY	*a;
+arrayind_t	start, nelem;
+int	starsub, quoted, pflags;
+{
+	ARRAY		*a2;
+	ARRAY_ELEMENT	*h, *p;
+	arrayind_t	i;
+	char		*t;
+	WORD_LIST	*wl;
+
+	p = a ? array_head (a) : 0;
+	if (p == 0 || array_empty (a) || start > array_max_index(a))
+		return ((char *)NULL);
+
+	/*
+	 * Find element with index START.  If START corresponds to an unset
+	 * element (arrays can be sparse), use the first element whose index
+	 * is >= START.  If START is < 0, we count START indices back from
+	 * the end of A (not elements, even with sparse arrays -- START is an
+	 * index).
+	 */
+	for (p = element_forw(p); p != array_head(a) && start > element_index(p); p = element_forw(p))
+		;
+
+	if (p == a->head)
+		return ((char *)NULL);
+
+	/* Starting at P, take NELEM elements, inclusive. */
+	for (i = 0, h = p; p != a->head && i < nelem; i++, p = element_forw(p))
+		;
+
+	a2 = array_slice(a, h, p);
+
+	wl = array_to_word_list(a2);
+	array_dispose(a2);
+	if (wl == 0)
+		return (char *)NULL;
+	t = string_list_pos_params(starsub ? '*' : '@', wl, quoted, pflags);	/* XXX */
+	dispose_words(wl);
+
+	return t;
+}
+
+char *
+array_patsub (a, pat, rep, mflags)
+ARRAY	*a;
+char	*pat, *rep;
+int	mflags;
+{
+	char	*t;
+	int	pchar, qflags, pflags;
+	WORD_LIST	*wl, *save;
+
+	if (a == 0 || array_head(a) == 0 || array_empty(a))
+		return ((char *)NULL);
+
+	wl = array_to_word_list(a);
+	if (wl == 0)
+		return (char *)NULL;
+
+	for (save = wl; wl; wl = wl->next) {
+		t = pat_subst (wl->word->word, pat, rep, mflags);
+		FREE (wl->word->word);
+		wl->word->word = t;
+	}
+
+	pchar = (mflags & MATCH_STARSUB) == MATCH_STARSUB ? '*' : '@';
+	qflags = (mflags & MATCH_QUOTED) == MATCH_QUOTED ? Q_DOUBLE_QUOTES : 0;
+	pflags = (mflags & MATCH_ASSIGNRHS) ? PF_ASSIGNRHS : 0;
+
+	t = string_list_pos_params (pchar, save, qflags, pflags);
+	dispose_words(save);
+
+	return t;
+}
+
+char *
+array_modcase (a, pat, modop, mflags)
+ARRAY	*a;
+char	*pat;
+int	modop;
+int	mflags;
+{
+	char	*t;
+	int	pchar, qflags, pflags;
+	WORD_LIST	*wl, *save;
+
+	if (a == 0 || array_head(a) == 0 || array_empty(a))
+		return ((char *)NULL);
+
+	wl = array_to_word_list(a);
+	if (wl == 0)
+		return ((char *)NULL);
+
+	for (save = wl; wl; wl = wl->next) {
+		t = sh_modcase(wl->word->word, pat, modop);
+		FREE(wl->word->word);
+		wl->word->word = t;
+	}
+
+	pchar = (mflags & MATCH_STARSUB) == MATCH_STARSUB ? '*' : '@';
+	qflags = (mflags & MATCH_QUOTED) == MATCH_QUOTED ? Q_DOUBLE_QUOTES : 0;
+	pflags = (mflags & MATCH_ASSIGNRHS) ? PF_ASSIGNRHS : 0;
+
+	t = string_list_pos_params (pchar, save, qflags, pflags);
+	dispose_words(save);
+
+	return t;
+}
+
+/*
+ * Allocate and return a new array element with index INDEX and value
+ * VALUE.
+ */
+ARRAY_ELEMENT *
+array_create_element(indx, value)
+arrayind_t	indx;
+char	*value;
+{
+	ARRAY_ELEMENT *r;
+
+	r = (ARRAY_ELEMENT *)xmalloc(sizeof(ARRAY_ELEMENT));
+	r->ind = indx;
+	r->value = value ? savestring(value) : (char *)NULL;
+	r->next = r->prev = (ARRAY_ELEMENT *) NULL;
+	return(r);
+}
+
+#ifdef INCLUDE_UNUSED
+ARRAY_ELEMENT *
+array_copy_element(ae)
+ARRAY_ELEMENT	*ae;
+{
+	return(ae ? array_create_element(element_index(ae), element_value(ae))
+		  : (ARRAY_ELEMENT *) NULL);
+}
+#endif
+
+void
+array_dispose_element(ae)
+ARRAY_ELEMENT	*ae;
+{
+	if (ae) {
+		FREE(ae->value);
+		free(ae);
+	}
+}
+
+/*
+ * Add a new element with index I and value V to array A (a[i] = v).
+ */
+int
+array_insert(a, i, v)
+ARRAY	*a;
+arrayind_t	i;
+char	*v;
+{
+	register ARRAY_ELEMENT *new, *ae, *start;
+	arrayind_t startind;
+	int direction;
+
+	if (a == 0)
+		return(-1);
+	new = array_create_element(i, v);
+	if (i > array_max_index(a)) {
+		/*
+		 * Hook onto the end.  This also works for an empty array.
+		 * Fast path for the common case of allocating arrays
+		 * sequentially.
+		 */
+		ADD_BEFORE(a->head, new);
+		a->max_index = i;
+		a->num_elements++;
+		SET_LASTREF(a, new);
+		return(0);
+	} else if (i < array_first_index(a)) {
+		/* Hook at the beginning */
+		ADD_AFTER(a->head, new);
+		a->num_elements++;
+		SET_LASTREF(a, new);
+		return(0);
+	}
+#if OPTIMIZE_SEQUENTIAL_ARRAY_ASSIGNMENT
+	/*
+	 * Otherwise we search for the spot to insert it.  The lastref
+	 * handle optimizes the case of sequential or almost-sequential
+	 * assignments that are not at the end of the array.
+	 */
+	start = LASTREF(a);
+	/* Use same strategy as array_reference to avoid paying large penalty
+	   for semi-random assignment pattern. */
+	startind = element_index(start);
+	if (i < startind/2) {
+		start = element_forw(a->head);
+		startind = element_index(start);
+		direction = 1;
+	} else if (i >= startind) {
+		direction = 1;
+	} else {
+		direction = -1;
+	}
+#else
+	start = element_forw(ae->head);
+	startind = element_index(start);
+	direction = 1;
+#endif
+	for (ae = start; ae != a->head; ) {
+		if (element_index(ae) == i) {
+			/*
+			 * Replacing an existing element.
+			 */
+			free(element_value(ae));
+			/* Just swap in the new value */
+			ae->value = new->value;
+			new->value = 0;
+			array_dispose_element(new);
+			SET_LASTREF(a, ae);
+			return(0);
+		} else if (direction == 1 && element_index(ae) > i) {
+			ADD_BEFORE(ae, new);
+			a->num_elements++;
+			SET_LASTREF(a, new);
+			return(0);
+		} else if (direction == -1 && element_index(ae) < i) {
+			ADD_AFTER(ae, new);
+			a->num_elements++;
+			SET_LASTREF(a, new);
+			return(0);
+		}
+		ae = direction == 1 ? element_forw(ae) : element_back(ae);
+	}
+	array_dispose_element(new);
+	INVALIDATE_LASTREF(a);
+	return (-1);		/* problem */
+}
+
+/*
+ * Delete the element with index I from array A and return it so the
+ * caller can dispose of it.
+ */
+ARRAY_ELEMENT *
+array_remove(a, i)
+ARRAY	*a;
+arrayind_t	i;
+{
+	register ARRAY_ELEMENT *ae, *start;
+	arrayind_t startind;
+	int direction;
+
+	if (a == 0 || array_empty(a))
+		return((ARRAY_ELEMENT *) NULL);
+	if (i > array_max_index(a) || i < array_first_index(a))
+		return((ARRAY_ELEMENT *)NULL);	/* Keep roving pointer into array to optimize sequential access */
+	start = LASTREF(a);
+	/* Use same strategy as array_reference to avoid paying large penalty
+	   for semi-random assignment pattern. */
+	startind = element_index(start);
+	if (i < startind/2) {
+		start = element_forw(a->head);
+		startind = element_index(start);
+		direction = 1;
+	} else if (i >= startind) {
+		direction = 1;
+	} else {
+		direction = -1;
+	}
+	for (ae = start; ae != a->head; ) {
+		if (element_index(ae) == i) {
+			ae->next->prev = ae->prev;
+			ae->prev->next = ae->next;
+			a->num_elements--;
+			if (i == array_max_index(a))
+				a->max_index = element_index(ae->prev);
+#if 0
+			INVALIDATE_LASTREF(a);
+#else
+			if (ae->next != a->head)
+				SET_LASTREF(a, ae->next);
+			else if (ae->prev != a->head)
+				SET_LASTREF(a, ae->prev);
+			else
+				INVALIDATE_LASTREF(a);
+#endif
+			return(ae);
+		}
+		ae = (direction == 1) ? element_forw(ae) : element_back(ae);
+		if (direction == 1 && element_index(ae) > i)
+			break;
+		else if (direction == -1 && element_index(ae) < i)
+			break;
+	}
+	return((ARRAY_ELEMENT *) NULL);
+}
+
+/*
+ * Return the value of a[i].
+ */
+char *
+array_reference(a, i)
+ARRAY	*a;
+arrayind_t	i;
+{
+	register ARRAY_ELEMENT *ae, *start;
+	arrayind_t startind;
+	int direction;
+
+	if (a == 0 || array_empty(a))
+		return((char *) NULL);
+	if (i > array_max_index(a) || i < array_first_index(a))
+		return((char *)NULL);	/* Keep roving pointer into array to optimize sequential access */
+	start = LASTREF(a);	/* lastref pointer */
+	startind = element_index(start);
+	if (i < startind/2) {	/* XXX - guess */
+		start = element_forw(a->head);
+		startind = element_index(start);
+		direction = 1;
+	} else if (i >= startind) {
+		direction = 1;
+	} else {
+		direction = -1;
+	}
+	for (ae = start; ae != a->head; ) {
+		if (element_index(ae) == i) {
+			SET_LASTREF(a, ae);
+			return(element_value(ae));
+		}
+		ae = (direction == 1) ? element_forw(ae) : element_back(ae);
+		/* Take advantage of index ordering to short-circuit */
+		/* If we don't find it, set the lastref pointer to the element
+		   that's `closest', assuming that the unsuccessful reference
+		   will quickly be followed by an assignment.  No worse than
+		   not changing it from the previous value or resetting it. */
+		if (direction == 1 && element_index(ae) > i) {
+			start = ae;	/* use for SET_LASTREF below */
+			break;
+		} else if (direction == -1 && element_index(ae) < i) {
+			start = ae;	/* use for SET_LASTREF below */
+			break;
+		}
+	}
+#if 0
+	UNSET_LASTREF(a);
+#else
+	SET_LASTREF(a, start);
+#endif
+	return((char *) NULL);
+}
+
+/* Convenience routines for the shell to translate to and from the form used
+   by the rest of the code. */
+
+WORD_LIST *
+array_to_word_list(a)
+ARRAY	*a;
+{
+	WORD_LIST	*list;
+	ARRAY_ELEMENT	*ae;
+
+	if (a == 0 || array_empty(a))
+		return((WORD_LIST *)NULL);
+	list = (WORD_LIST *)NULL;
+	for (ae = element_forw(a->head); ae != a->head; ae = element_forw(ae))
+		list = make_word_list (make_bare_word(element_value(ae)), list);
+	return (REVERSE_LIST(list, WORD_LIST *));
+}
+
+ARRAY *
+array_from_word_list (list)
+WORD_LIST	*list;
+{
+	ARRAY	*a;
+
+	if (list == 0)
+		return((ARRAY *)NULL);
+	a = array_create();
+	return (array_assign_list (a, list));
+}
+
+WORD_LIST *
+array_keys_to_word_list(a)
+ARRAY	*a;
+{
+	WORD_LIST	*list;
+	ARRAY_ELEMENT	*ae;
+	char		*t;
+
+	if (a == 0 || array_empty(a))
+		return((WORD_LIST *)NULL);
+	list = (WORD_LIST *)NULL;
+	for (ae = element_forw(a->head); ae != a->head; ae = element_forw(ae)) {
+		t = itos(element_index(ae));
+		list = make_word_list (make_bare_word(t), list);
+		free(t);
+	}
+	return (REVERSE_LIST(list, WORD_LIST *));
+}
+
+ARRAY *
+array_assign_list (array, list)
+ARRAY	*array;
+WORD_LIST	*list;
+{
+	register WORD_LIST *l;
+	register arrayind_t i;
+
+	for (l = list, i = 0; l; l = l->next, i++)
+		array_insert(array, i, l->word->word);
+	return array;
+}
+
+char **
+array_to_argv (a, countp)
+ARRAY	*a;
+int	*countp;
+{
+	char		**ret, *t;
+	int		i;
+	ARRAY_ELEMENT	*ae;
+
+	if (a == 0 || array_empty(a)) {
+		if (countp)
+			*countp = 0;
+		return ((char **)NULL);
+	}
+	ret = strvec_create (array_num_elements (a) + 1);
+	i = 0;
+	for (ae = element_forw(a->head); ae != a->head; ae = element_forw(ae)) {
+		t = element_value (ae);
+		if (t)
+			ret[i++] = savestring (t);
+	}
+	ret[i] = (char *)NULL;
+	if (countp)
+		*countp = i;
+	return (ret);
+}
+	
+/*
+ * Return a string that is the concatenation of the elements in A from START
+ * to END, separated by SEP.
+ */
+static char *
+array_to_string_internal (start, end, sep, quoted)
+ARRAY_ELEMENT	*start, *end;
+char	*sep;
+int	quoted;
+{
+	char	*result, *t;
+	ARRAY_ELEMENT *ae;
+	int	slen, rsize, rlen, reg;
+
+	if (start == end)	/* XXX - should not happen */
+		return ((char *)NULL);
+
+	slen = strlen(sep);
+	result = NULL;
+	for (rsize = rlen = 0, ae = start; ae != end; ae = element_forw(ae)) {
+		if (rsize == 0)
+			result = (char *)xmalloc (rsize = 64);
+		if (element_value(ae)) {
+			t = quoted ? quote_string(element_value(ae)) : element_value(ae);
+			reg = strlen(t);
+			RESIZE_MALLOCED_BUFFER (result, rlen, (reg + slen + 2),
+						rsize, rsize);
+			strcpy(result + rlen, t);
+			rlen += reg;
+			if (quoted)
+				free(t);
+			/*
+			 * Add a separator only after non-null elements.
+			 */
+			if (element_forw(ae) != end) {
+				strcpy(result + rlen, sep);
+				rlen += slen;
+			}
+		}
+	}
+	if (result)
+	  result[rlen] = '\0';	/* XXX */
+	return(result);
+}
+
+char *
+array_to_kvpair (a, quoted)
+ARRAY	*a;
+int	quoted;
+{
+	char	*result, *valstr, *is;
+	char	indstr[INT_STRLEN_BOUND(intmax_t) + 1];
+	ARRAY_ELEMENT *ae;
+	int	rsize, rlen, elen;
+
+	if (a == 0 || array_empty (a))
+		return((char *)NULL);
+
+	result = (char *)xmalloc (rsize = 128);
+	result[rlen = 0] = '\0';
+
+	for (ae = element_forw(a->head); ae != a->head; ae = element_forw(ae)) {
+		is = inttostr (element_index(ae), indstr, sizeof(indstr));
+		valstr = element_value (ae) ?
+				(ansic_shouldquote (element_value (ae)) ?
+				   ansic_quote (element_value(ae), 0, (int *)0) :
+				   sh_double_quote (element_value (ae)))
+					    : (char *)NULL;
+		elen = STRLEN (is) + 8 + STRLEN (valstr);
+		RESIZE_MALLOCED_BUFFER (result, rlen, (elen + 1), rsize, rsize);
+
+		strcpy (result + rlen, is);
+		rlen += STRLEN (is);
+		result[rlen++] = ' ';
+		if (valstr) {
+			strcpy (result + rlen, valstr);
+			rlen += STRLEN (valstr);
+		} else {
+			strcpy (result + rlen, "\"\"");
+			rlen += 2;
+		}
+
+		if (element_forw(ae) != a->head)
+		  result[rlen++] = ' ';
+
+		FREE (valstr);
+	}
+	RESIZE_MALLOCED_BUFFER (result, rlen, 1, rsize, 8);
+	result[rlen] = '\0';
+
+	if (quoted) {
+		/* This is not as efficient as it could be... */
+		valstr = sh_single_quote (result);
+		free (result);
+		result = valstr;
+	}
+	return(result);
+}
+
+char *
+array_to_assign (a, quoted)
+ARRAY	*a;
+int	quoted;
+{
+	char	*result, *valstr, *is;
+	char	indstr[INT_STRLEN_BOUND(intmax_t) + 1];
+	ARRAY_ELEMENT *ae;
+	int	rsize, rlen, elen;
+
+	if (a == 0 || array_empty (a))
+		return((char *)NULL);
+
+	result = (char *)xmalloc (rsize = 128);
+	result[0] = '(';
+	rlen = 1;
+
+	for (ae = element_forw(a->head); ae != a->head; ae = element_forw(ae)) {
+		is = inttostr (element_index(ae), indstr, sizeof(indstr));
+		valstr = element_value (ae) ?
+				(ansic_shouldquote (element_value (ae)) ?
+				   ansic_quote (element_value(ae), 0, (int *)0) :
+				   sh_double_quote (element_value (ae)))
+					    : (char *)NULL;
+		elen = STRLEN (is) + 8 + STRLEN (valstr);
+		RESIZE_MALLOCED_BUFFER (result, rlen, (elen + 1), rsize, rsize);
+
+		result[rlen++] = '[';
+		strcpy (result + rlen, is);
+		rlen += STRLEN (is);
+		result[rlen++] = ']';
+		result[rlen++] = '=';
+		if (valstr) {
+			strcpy (result + rlen, valstr);
+			rlen += STRLEN (valstr);
+		}
+
+		if (element_forw(ae) != a->head)
+		  result[rlen++] = ' ';
+
+		FREE (valstr);
+	}
+	RESIZE_MALLOCED_BUFFER (result, rlen, 1, rsize, 8);
+	result[rlen++] = ')';
+	result[rlen] = '\0';
+	if (quoted) {
+		/* This is not as efficient as it could be... */
+		valstr = sh_single_quote (result);
+		free (result);
+		result = valstr;
+	}
+	return(result);
+}
+
+char *
+array_to_string (a, sep, quoted)
+ARRAY	*a;
+char	*sep;
+int	quoted;
+{
+	if (a == 0)
+		return((char *)NULL);
+	if (array_empty(a))
+		return(savestring(""));
+	return (array_to_string_internal (element_forw(a->head), a->head, sep, quoted));
+}
+
+#if defined (INCLUDE_UNUSED) || defined (TEST_ARRAY)
+/*
+ * Return an array consisting of elements in S, separated by SEP
+ */
+ARRAY *
+array_from_string(s, sep)
+char	*s, *sep;
+{
+	ARRAY	*a;
+	WORD_LIST *w;
+
+	if (s == 0)
+		return((ARRAY *)NULL);
+	w = list_string (s, sep, 0);
+	if (w == 0)
+		return((ARRAY *)NULL);
+	a = array_from_word_list (w);
+	return (a);
+}
+#endif
+
+#if defined (TEST_ARRAY)
+/*
+ * To make a running version, compile -DTEST_ARRAY and link with:
+ * 	xmalloc.o syntax.o lib/malloc/libmalloc.a lib/sh/libsh.a
+ */
+int interrupt_immediately = 0;
+
+int
+signal_is_trapped(s)
+int	s;
+{
+	return 0;
+}
+
+void
+fatal_error(const char *s, ...)
+{
+	fprintf(stderr, "array_test: fatal memory error\n");
+	abort();
+}
+
+void
+programming_error(const char *s, ...)
+{
+	fprintf(stderr, "array_test: fatal programming error\n");
+	abort();
+}
+
+WORD_DESC *
+make_bare_word (s)
+const char	*s;
+{
+	WORD_DESC *w;
+
+	w = (WORD_DESC *)xmalloc(sizeof(WORD_DESC));
+	w->word = s ? savestring(s) : savestring ("");
+	w->flags = 0;
+	return w;
+}
+
+WORD_LIST *
+make_word_list(x, l)
+WORD_DESC	*x;
+WORD_LIST	*l;
+{
+	WORD_LIST *w;
+
+	w = (WORD_LIST *)xmalloc(sizeof(WORD_LIST));
+	w->word = x;
+	w->next = l;
+	return w;
+}
+
+WORD_LIST *
+list_string(s, t, i)
+char	*s, *t;
+int	i;
+{
+	char	*r, *a;
+	WORD_LIST	*wl;
+
+	if (s == 0)
+		return (WORD_LIST *)NULL;
+	r = savestring(s);
+	wl = (WORD_LIST *)NULL;
+	a = strtok(r, t);
+	while (a) {
+		wl = make_word_list (make_bare_word(a), wl);
+		a = strtok((char *)NULL, t);
+	}
+	return (REVERSE_LIST (wl, WORD_LIST *));
+}
+
+GENERIC_LIST *
+list_reverse (list)
+GENERIC_LIST	*list;
+{
+	register GENERIC_LIST *next, *prev;
+
+	for (prev = 0; list; ) {
+		next = list->next;
+		list->next = prev;
+		prev = list;
+		list = next;
+	}
+	return prev;
+}
+
+char *
+pat_subst(s, t, u, i)
+char	*s, *t, *u;
+int	i;
+{
+	return ((char *)NULL);
+}
+
+char *
+quote_string(s)
+char	*s;
+{
+	return savestring(s);
+}
+
+print_element(ae)
+ARRAY_ELEMENT	*ae;
+{
+	char	lbuf[INT_STRLEN_BOUND (intmax_t) + 1];
+
+	printf("array[%s] = %s\n",
+		inttostr (element_index(ae), lbuf, sizeof (lbuf)),
+		element_value(ae));
+}
+
+print_array(a)
+ARRAY	*a;
+{
+	printf("\n");
+	array_walk(a, print_element, (void *)NULL);
+}
+
+main()
+{
+	ARRAY	*a, *new_a, *copy_of_a;
+	ARRAY_ELEMENT	*ae, *aew;
+	char	*s;
+
+	a = array_create();
+	array_insert(a, 1, "one");
+	array_insert(a, 7, "seven");
+	array_insert(a, 4, "four");
+	array_insert(a, 1029, "one thousand twenty-nine");
+	array_insert(a, 12, "twelve");
+	array_insert(a, 42, "forty-two");
+	print_array(a);
+	s = array_to_string (a, " ", 0);
+	printf("s = %s\n", s);
+	copy_of_a = array_from_string(s, " ");
+	printf("copy_of_a:");
+	print_array(copy_of_a);
+	array_dispose(copy_of_a);
+	printf("\n");
+	free(s);
+	ae = array_remove(a, 4);
+	array_dispose_element(ae);
+	ae = array_remove(a, 1029);
+	array_dispose_element(ae);
+	array_insert(a, 16, "sixteen");
+	print_array(a);
+	s = array_to_string (a, " ", 0);
+	printf("s = %s\n", s);
+	copy_of_a = array_from_string(s, " ");
+	printf("copy_of_a:");
+	print_array(copy_of_a);
+	array_dispose(copy_of_a);
+	printf("\n");
+	free(s);
+	array_insert(a, 2, "two");
+	array_insert(a, 1029, "new one thousand twenty-nine");
+	array_insert(a, 0, "zero");
+	array_insert(a, 134, "");
+	print_array(a);
+	s = array_to_string (a, ":", 0);
+	printf("s = %s\n", s);
+	copy_of_a = array_from_string(s, ":");
+	printf("copy_of_a:");
+	print_array(copy_of_a);
+	array_dispose(copy_of_a);
+	printf("\n");
+	free(s);
+	new_a = array_copy(a);
+	print_array(new_a);
+	s = array_to_string (new_a, ":", 0);
+	printf("s = %s\n", s);
+	copy_of_a = array_from_string(s, ":");
+	free(s);
+	printf("copy_of_a:");
+	print_array(copy_of_a);
+	array_shift(copy_of_a, 2, AS_DISPOSE);
+	printf("copy_of_a shifted by two:");
+	print_array(copy_of_a);
+	ae = array_shift(copy_of_a, 2, 0);
+	printf("copy_of_a shifted by two:");
+	print_array(copy_of_a);
+	for ( ; ae; ) {
+		aew = element_forw(ae);
+		array_dispose_element(ae);
+		ae = aew;
+	}
+	array_rshift(copy_of_a, 1, (char *)0);
+	printf("copy_of_a rshift by 1:");
+	print_array(copy_of_a);
+	array_rshift(copy_of_a, 2, "new element zero");
+	printf("copy_of_a rshift again by 2 with new element zero:");
+	print_array(copy_of_a);
+	s = array_to_assign(copy_of_a, 0);
+	printf("copy_of_a=%s\n", s);
+	free(s);
+	ae = array_shift(copy_of_a, array_num_elements(copy_of_a), 0);
+	for ( ; ae; ) {
+		aew = element_forw(ae);
+		array_dispose_element(ae);
+		ae = aew;
+	}
+	array_dispose(copy_of_a);
+	printf("\n");
+	array_dispose(a);
+	array_dispose(new_a);
+}
+
+#endif /* TEST_ARRAY */
+#endif /* ARRAY_VARS */
diff --git a/array.h b/array.h
new file mode 100644
index 0000000..189d646
--- /dev/null
+++ b/array.h
@@ -0,0 +1,127 @@
+/* array.h -- definitions for the interface exported by array.c that allows
+   the rest of the shell to manipulate array variables. */
+
+/* Copyright (C) 1997-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+
+#ifndef _ARRAY_H_
+#define _ARRAY_H_
+
+#include "stdc.h"
+
+typedef intmax_t	arrayind_t;
+
+enum atype {array_indexed, array_assoc};	/* only array_indexed used */
+
+typedef struct array {
+	enum atype	type;
+	arrayind_t	max_index;
+	int		num_elements;
+	struct array_element *head;
+	struct array_element *lastref;
+} ARRAY;
+
+typedef struct array_element {
+	arrayind_t	ind;
+	char	*value;
+	struct array_element *next, *prev;
+} ARRAY_ELEMENT;
+
+typedef int sh_ae_map_func_t PARAMS((ARRAY_ELEMENT *, void *));
+
+/* Basic operations on entire arrays */
+extern ARRAY	*array_create PARAMS((void));
+extern void	array_flush PARAMS((ARRAY *));
+extern void	array_dispose PARAMS((ARRAY *));
+extern ARRAY	*array_copy PARAMS((ARRAY *));
+extern ARRAY	*array_slice PARAMS((ARRAY *, ARRAY_ELEMENT *, ARRAY_ELEMENT *));
+extern void	array_walk PARAMS((ARRAY   *, sh_ae_map_func_t *, void *));
+
+extern ARRAY_ELEMENT *array_shift PARAMS((ARRAY *, int, int));
+extern int	array_rshift PARAMS((ARRAY *, int, char *));
+extern ARRAY_ELEMENT *array_unshift_element PARAMS((ARRAY *));
+extern int	array_shift_element PARAMS((ARRAY *, char *));
+
+extern ARRAY	*array_quote PARAMS((ARRAY *));
+extern ARRAY	*array_quote_escapes PARAMS((ARRAY *));
+extern ARRAY	*array_dequote PARAMS((ARRAY *));
+extern ARRAY	*array_dequote_escapes PARAMS((ARRAY *));
+extern ARRAY	*array_remove_quoted_nulls PARAMS((ARRAY *));
+
+extern char	*array_subrange PARAMS((ARRAY *, arrayind_t, arrayind_t, int, int, int));
+extern char	*array_patsub PARAMS((ARRAY *, char *, char *, int));
+extern char	*array_modcase PARAMS((ARRAY *, char *, int, int));
+
+/* Basic operations on array elements. */
+extern ARRAY_ELEMENT *array_create_element PARAMS((arrayind_t, char *));
+extern ARRAY_ELEMENT *array_copy_element PARAMS((ARRAY_ELEMENT *));
+extern void	array_dispose_element PARAMS((ARRAY_ELEMENT *));
+
+extern int	array_insert PARAMS((ARRAY *, arrayind_t, char *));
+extern ARRAY_ELEMENT *array_remove PARAMS((ARRAY *, arrayind_t));
+extern char	*array_reference PARAMS((ARRAY *, arrayind_t));
+
+/* Converting to and from arrays */
+extern WORD_LIST *array_to_word_list PARAMS((ARRAY *));
+extern ARRAY *array_from_word_list PARAMS((WORD_LIST *));
+extern WORD_LIST *array_keys_to_word_list PARAMS((ARRAY *));
+
+extern ARRAY *array_assign_list PARAMS((ARRAY *, WORD_LIST *));
+
+extern char **array_to_argv PARAMS((ARRAY *, int *));
+
+extern char *array_to_kvpair PARAMS((ARRAY *, int));
+extern char *array_to_assign PARAMS((ARRAY *, int));
+extern char *array_to_string PARAMS((ARRAY *, char *, int));
+extern ARRAY *array_from_string PARAMS((char *, char *));
+
+/* Flags for array_shift */
+#define AS_DISPOSE	0x01
+
+#define array_num_elements(a)	((a)->num_elements)
+#define array_max_index(a)	((a)->max_index)
+#define array_first_index(a)	((a)->head->next->ind)
+#define array_head(a)		((a)->head)
+#define array_empty(a)		((a)->num_elements == 0)
+
+#define element_value(ae)	((ae)->value)
+#define element_index(ae)	((ae)->ind)
+#define element_forw(ae)	((ae)->next)
+#define element_back(ae)	((ae)->prev)
+
+#define set_element_value(ae, val)	((ae)->value = (val))
+
+/* Convenience */
+#define array_push(a,v)	\
+  do { array_rshift ((a), 1, (v)); } while (0)
+#define array_pop(a) \
+  do { array_dispose_element (array_shift ((a), 1, 0)); } while (0)
+
+#define GET_ARRAY_FROM_VAR(n, v, a) \
+  do { \
+    (v) = find_variable (n); \
+    (a) = ((v) && array_p ((v))) ? array_cell (v) : (ARRAY *)0; \
+  } while (0)
+
+#define ALL_ELEMENT_SUB(c)	((c) == '@' || (c) == '*')
+
+/* In eval.c, but uses ARRAY * */
+extern int execute_array_command PARAMS((ARRAY *, void *));
+
+#endif /* _ARRAY_H_ */
diff --git a/arrayfunc.c b/arrayfunc.c
new file mode 100644
index 0000000..2f8a384
--- /dev/null
+++ b/arrayfunc.c
@@ -0,0 +1,1496 @@
+/* arrayfunc.c -- High-level array functions used by other parts of the shell. */
+
+/* Copyright (C) 2001-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#if defined (ARRAY_VARS)
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+#include <stdio.h>
+
+#include "bashintl.h"
+
+#include "shell.h"
+#include "execute_cmd.h"
+#include "pathexp.h"
+
+#include "shmbutil.h"
+#if defined (HAVE_MBSTR_H) && defined (HAVE_MBSCHR)
+#  include <mbstr.h>		/* mbschr */
+#endif
+
+#include "builtins/common.h"
+
+#ifndef LBRACK
+#  define LBRACK '['
+#  define RBRACK ']'
+#endif
+
+/* This variable means to not expand associative array subscripts more than
+   once, when performing variable expansion. */
+int assoc_expand_once = 0;
+
+/* Ditto for indexed array subscripts -- currently unused */
+int array_expand_once = 0;
+
+static SHELL_VAR *bind_array_var_internal PARAMS((SHELL_VAR *, arrayind_t, char *, char *, int));
+static SHELL_VAR *assign_array_element_internal PARAMS((SHELL_VAR *, char *, char *, char *, int, char *, int));
+
+static void assign_assoc_from_kvlist PARAMS((SHELL_VAR *, WORD_LIST *, HASH_TABLE *, int));
+
+static char *quote_assign PARAMS((const char *));
+static void quote_array_assignment_chars PARAMS((WORD_LIST *));
+static char *quote_compound_array_word PARAMS((char *, int));
+static char *array_value_internal PARAMS((const char *, int, int, int *, arrayind_t *));
+
+/* Standard error message to use when encountering an invalid array subscript */
+const char * const bash_badsub_errmsg = N_("bad array subscript");
+
+/* **************************************************************** */
+/*								    */
+/*  Functions to manipulate array variables and perform assignments */
+/*								    */
+/* **************************************************************** */
+
+/* Convert a shell variable to an array variable.  The original value is
+   saved as array[0]. */
+SHELL_VAR *
+convert_var_to_array (var)
+     SHELL_VAR *var;
+{
+  char *oldval;
+  ARRAY *array;
+
+  oldval = value_cell (var);
+  array = array_create ();
+  if (oldval)
+    array_insert (array, 0, oldval);
+
+  FREE (value_cell (var));
+  var_setarray (var, array);
+
+  /* these aren't valid anymore */
+  var->dynamic_value = (sh_var_value_func_t *)NULL;
+  var->assign_func = (sh_var_assign_func_t *)NULL;
+
+  INVALIDATE_EXPORTSTR (var);
+  if (exported_p (var))
+    array_needs_making++;
+
+  VSETATTR (var, att_array);
+  if (oldval)
+    VUNSETATTR (var, att_invisible);
+
+  /* Make sure it's not marked as an associative array any more */
+  VUNSETATTR (var, att_assoc);
+
+  /* Since namerefs can't be array variables, turn off nameref attribute */
+  VUNSETATTR (var, att_nameref);
+
+  return var;
+}
+
+/* Convert a shell variable to an array variable.  The original value is
+   saved as array[0]. */
+SHELL_VAR *
+convert_var_to_assoc (var)
+     SHELL_VAR *var;
+{
+  char *oldval;
+  HASH_TABLE *hash;
+
+  oldval = value_cell (var);
+  hash = assoc_create (0);
+  if (oldval)
+    assoc_insert (hash, savestring ("0"), oldval);
+
+  FREE (value_cell (var));
+  var_setassoc (var, hash);
+
+  /* these aren't valid anymore */
+  var->dynamic_value = (sh_var_value_func_t *)NULL;
+  var->assign_func = (sh_var_assign_func_t *)NULL;
+
+  INVALIDATE_EXPORTSTR (var);
+  if (exported_p (var))
+    array_needs_making++;
+
+  VSETATTR (var, att_assoc);
+  if (oldval)
+    VUNSETATTR (var, att_invisible);
+
+  /* Make sure it's not marked as an indexed array any more */
+  VUNSETATTR (var, att_array);
+
+  /* Since namerefs can't be array variables, turn off nameref attribute */
+  VUNSETATTR (var, att_nameref);
+
+  return var;
+}
+
+char *
+make_array_variable_value (entry, ind, key, value, flags)
+     SHELL_VAR *entry;
+     arrayind_t ind;
+     char *key;
+     char *value;
+     int flags;
+{
+  SHELL_VAR *dentry;
+  char *newval;
+
+  /* If we're appending, we need the old value of the array reference, so
+     fake out make_variable_value with a dummy SHELL_VAR */
+  if (flags & ASS_APPEND)
+    {
+      dentry = (SHELL_VAR *)xmalloc (sizeof (SHELL_VAR));
+      dentry->name = savestring (entry->name);
+      if (assoc_p (entry))
+	newval = assoc_reference (assoc_cell (entry), key);
+      else
+	newval = array_reference (array_cell (entry), ind);
+      if (newval)
+	dentry->value = savestring (newval);
+      else
+	{
+	  dentry->value = (char *)xmalloc (1);
+	  dentry->value[0] = '\0';
+	}
+      dentry->exportstr = 0;
+      dentry->attributes = entry->attributes & ~(att_array|att_assoc|att_exported);
+      /* Leave the rest of the members uninitialized; the code doesn't look
+	 at them. */
+      newval = make_variable_value (dentry, value, flags);	 
+      dispose_variable (dentry);
+    }
+  else
+    newval = make_variable_value (entry, value, flags);
+
+  return newval;
+}
+
+/* Assign HASH[KEY]=VALUE according to FLAGS. ENTRY is an associative array
+   variable; HASH is the hash table to assign into. HASH may or may not be
+   the hash table associated with ENTRY; if it's not, the caller takes care
+   of it.
+   XXX - make sure that any dynamic associative array variables recreate the
+   hash table on each assignment. BASH_CMDS and BASH_ALIASES already do this */
+static SHELL_VAR *
+bind_assoc_var_internal (entry, hash, key, value, flags)
+     SHELL_VAR *entry;
+     HASH_TABLE *hash;
+     char *key;
+     char *value;
+     int flags;
+{
+  char *newval;
+
+  /* Use the existing array contents to expand the value */
+  newval = make_array_variable_value (entry, 0, key, value, flags);
+
+  if (entry->assign_func)
+    (*entry->assign_func) (entry, newval, 0, key);
+  else
+    assoc_insert (hash, key, newval);
+
+  FREE (newval);
+
+  VUNSETATTR (entry, att_invisible);	/* no longer invisible */
+
+  /* check mark_modified_variables if we ever want to export array vars */
+  return (entry);
+}
+
+/* Perform ENTRY[IND]=VALUE or ENTRY[KEY]=VALUE. This is not called for every
+   assignment to an associative array; see assign_compound_array_list below. */
+static SHELL_VAR *
+bind_array_var_internal (entry, ind, key, value, flags)
+     SHELL_VAR *entry;
+     arrayind_t ind;
+     char *key;
+     char *value;
+     int flags;
+{
+  char *newval;
+
+  newval = make_array_variable_value (entry, ind, key, value, flags);
+
+  if (entry->assign_func)
+    (*entry->assign_func) (entry, newval, ind, key);
+  else if (assoc_p (entry))
+    assoc_insert (assoc_cell (entry), key, newval);
+  else
+    array_insert (array_cell (entry), ind, newval);
+  FREE (newval);
+
+  VUNSETATTR (entry, att_invisible);	/* no longer invisible */
+
+  /* check mark_modified_variables if we ever want to export array vars */
+  return (entry);
+}
+
+/* Perform an array assignment name[ind]=value.  If NAME already exists and
+   is not an array, and IND is 0, perform name=value instead.  If NAME exists
+   and is not an array, and IND is not 0, convert it into an array with the
+   existing value as name[0].
+
+   If NAME does not exist, just create an array variable, no matter what
+   IND's value may be. */
+SHELL_VAR *
+bind_array_variable (name, ind, value, flags)
+     char *name;
+     arrayind_t ind;
+     char *value;
+     int flags;
+{
+  SHELL_VAR *entry;
+
+  entry = find_shell_variable (name);
+
+  if (entry == (SHELL_VAR *) 0)
+    {
+      /* Is NAME a nameref variable that points to an unset variable? */
+      entry = find_variable_nameref_for_create (name, 0);
+      if (entry == INVALID_NAMEREF_VALUE)
+	return ((SHELL_VAR *)0);
+      if (entry && nameref_p (entry))
+	entry = make_new_array_variable (nameref_cell (entry));
+    }
+  if (entry == (SHELL_VAR *) 0)
+    entry = make_new_array_variable (name);
+  else if ((readonly_p (entry) && (flags&ASS_FORCE) == 0) || noassign_p (entry))
+    {
+      if (readonly_p (entry))
+	err_readonly (name);
+      return (entry);
+    }
+  else if (array_p (entry) == 0)
+    entry = convert_var_to_array (entry);
+
+  /* ENTRY is an array variable, and ARRAY points to the value. */
+  return (bind_array_var_internal (entry, ind, 0, value, flags));
+}
+
+SHELL_VAR *
+bind_array_element (entry, ind, value, flags)
+     SHELL_VAR *entry;
+     arrayind_t ind;
+     char *value;
+     int flags;
+{
+  return (bind_array_var_internal (entry, ind, 0, value, flags));
+}
+                    
+SHELL_VAR *
+bind_assoc_variable (entry, name, key, value, flags)
+     SHELL_VAR *entry;
+     char *name;
+     char *key;
+     char *value;
+     int flags;
+{
+  if ((readonly_p (entry) && (flags&ASS_FORCE) == 0) || noassign_p (entry))
+    {
+      if (readonly_p (entry))
+	err_readonly (name);
+      return (entry);
+    }
+
+  return (bind_assoc_var_internal (entry, assoc_cell (entry), key, value, flags));
+}
+
+/* Parse NAME, a lhs of an assignment statement of the form v[s], and
+   assign VALUE to that array element by calling bind_array_variable().
+   Flags are ASS_ assignment flags */
+SHELL_VAR *
+assign_array_element (name, value, flags)
+     char *name, *value;
+     int flags;
+{
+  char *sub, *vname;
+  int sublen, isassoc;
+  SHELL_VAR *entry;
+
+  vname = array_variable_name (name, (flags & ASS_NOEXPAND) != 0, &sub, &sublen);
+
+  if (vname == 0)
+    return ((SHELL_VAR *)NULL);
+
+  entry = find_variable (vname);
+  isassoc = entry && assoc_p (entry);
+
+  if (((isassoc == 0 || (flags & ASS_NOEXPAND) == 0) && (ALL_ELEMENT_SUB (sub[0]) && sub[1] == ']')) || (sublen <= 1))
+    {
+      free (vname);
+      err_badarraysub (name);
+      return ((SHELL_VAR *)NULL);
+    }
+
+  entry = assign_array_element_internal (entry, name, vname, sub, sublen, value, flags);
+
+  free (vname);
+  return entry;
+}
+
+static SHELL_VAR *
+assign_array_element_internal (entry, name, vname, sub, sublen, value, flags)
+     SHELL_VAR *entry;
+     char *name;		/* only used for error messages */
+     char *vname;
+     char *sub;
+     int sublen;
+     char *value;
+     int flags;
+{
+  char *akey;
+  arrayind_t ind;
+
+  if (entry && assoc_p (entry))
+    {
+      sub[sublen-1] = '\0';
+      if ((flags & ASS_NOEXPAND) == 0)
+	akey = expand_assignment_string_to_string (sub, 0);	/* [ */
+      else
+	akey = savestring (sub);
+      sub[sublen-1] = ']';
+      if (akey == 0 || *akey == 0)
+	{
+	  err_badarraysub (name);
+	  FREE (akey);
+	  return ((SHELL_VAR *)NULL);
+	}
+      entry = bind_assoc_variable (entry, vname, akey, value, flags);
+    }
+  else
+    {
+      ind = array_expand_index (entry, sub, sublen, 0);
+      /* negative subscripts to indexed arrays count back from end */
+      if (entry && ind < 0)
+	ind = (array_p (entry) ? array_max_index (array_cell (entry)) : 0) + 1 + ind;
+      if (ind < 0)
+	{
+	  err_badarraysub (name);
+	  return ((SHELL_VAR *)NULL);
+	}
+      entry = bind_array_variable (vname, ind, value, flags);
+    }
+
+  return (entry);
+}
+
+/* Find the array variable corresponding to NAME.  If there is no variable,
+   create a new array variable.  If the variable exists but is not an array,
+   convert it to an indexed array.  If FLAGS&1 is non-zero, an existing
+   variable is checked for the readonly or noassign attribute in preparation
+   for assignment (e.g., by the `read' builtin).  If FLAGS&2 is non-zero, we
+   create an associative array. */
+SHELL_VAR *
+find_or_make_array_variable (name, flags)
+     char *name;
+     int flags;
+{
+  SHELL_VAR *var;
+
+  var = find_variable (name);
+  if (var == 0)
+    {
+      /* See if we have a nameref pointing to a variable that hasn't been
+	 created yet. */
+      var = find_variable_last_nameref (name, 1);
+      if (var && nameref_p (var) && invisible_p (var))
+	{
+	  internal_warning (_("%s: removing nameref attribute"), name);
+	  VUNSETATTR (var, att_nameref);
+	}
+      if (var && nameref_p (var))
+	{
+	  if (valid_nameref_value (nameref_cell (var), 2) == 0)
+	    {
+	      sh_invalidid (nameref_cell (var));
+	      return ((SHELL_VAR *)NULL);
+	    }
+	  var = (flags & 2) ? make_new_assoc_variable (nameref_cell (var)) : make_new_array_variable (nameref_cell (var));
+	}
+    }
+
+  if (var == 0)
+    var = (flags & 2) ? make_new_assoc_variable (name) : make_new_array_variable (name);
+  else if ((flags & 1) && (readonly_p (var) || noassign_p (var)))
+    {
+      if (readonly_p (var))
+	err_readonly (name);
+      return ((SHELL_VAR *)NULL);
+    }
+  else if ((flags & 2) && array_p (var))
+    {
+      set_exit_status (EXECUTION_FAILURE);
+      report_error (_("%s: cannot convert indexed to associative array"), name);
+      return ((SHELL_VAR *)NULL);
+    }
+  else if (array_p (var) == 0 && assoc_p (var) == 0)
+    var = convert_var_to_array (var);
+
+  return (var);
+}
+  
+/* Perform a compound assignment statement for array NAME, where VALUE is
+   the text between the parens:  NAME=( VALUE ) */
+SHELL_VAR *
+assign_array_from_string (name, value, flags)
+     char *name, *value;
+     int flags;
+{
+  SHELL_VAR *var;
+  int vflags;
+
+  vflags = 1;
+  if (flags & ASS_MKASSOC)
+    vflags |= 2;
+
+  var = find_or_make_array_variable (name, vflags);
+  if (var == 0)
+    return ((SHELL_VAR *)NULL);
+
+  return (assign_array_var_from_string (var, value, flags));
+}
+
+/* Sequentially assign the indices of indexed array variable VAR from the
+   words in LIST. */
+SHELL_VAR *
+assign_array_var_from_word_list (var, list, flags)
+     SHELL_VAR *var;
+     WORD_LIST *list;
+     int flags;
+{
+  register arrayind_t i;
+  register WORD_LIST *l;
+  ARRAY *a;
+
+  a = array_cell (var);
+  i = (flags & ASS_APPEND) ? array_max_index (a) + 1 : 0;
+
+  for (l = list; l; l = l->next, i++)
+    bind_array_var_internal (var, i, 0, l->word->word, flags & ~ASS_APPEND);
+
+  VUNSETATTR (var, att_invisible);	/* no longer invisible */
+
+  return var;
+}
+
+WORD_LIST *
+expand_compound_array_assignment (var, value, flags)
+     SHELL_VAR *var;
+     char *value;
+     int flags;
+{
+  WORD_LIST *list, *nlist;
+  char *val;
+  int ni;
+
+  /* This condition is true when invoked from the declare builtin with a
+     command like
+	declare -a d='([1]="" [2]="bdef" [5]="hello world" "test")' */
+  if (*value == '(')	/*)*/
+    {
+      ni = 1;
+      val = extract_array_assignment_list (value, &ni);
+      if (val == 0)
+	return (WORD_LIST *)NULL;
+    }
+  else
+    val = value;
+
+  /* Expand the value string into a list of words, performing all the
+     shell expansions including pathname generation and word splitting. */
+  /* First we split the string on whitespace, using the shell parser
+     (ksh93 seems to do this). */
+  list = parse_string_to_word_list (val, 1, "array assign");
+
+  /* Note that we defer expansion of the assignment statements for associative
+     arrays here, so we don't have to scan the subscript and find the ending
+     bracket twice. See the caller below. */
+  if (var && assoc_p (var))
+    {
+      if (val != value)
+	free (val);
+      return list;
+    }
+
+  /* If we're using [subscript]=value, we need to quote each [ and ] to
+     prevent unwanted filename expansion.  This doesn't need to be done
+     for associative array expansion, since that uses a different expansion
+     function (see assign_compound_array_list below). */
+  if (list)
+    quote_array_assignment_chars (list);
+
+  /* Now that we've split it, perform the shell expansions on each
+     word in the list. */
+  nlist = list ? expand_words_no_vars (list) : (WORD_LIST *)NULL;
+
+  dispose_words (list);
+
+  if (val != value)
+    free (val);
+
+  return nlist;
+}
+
+#if ASSOC_KVPAIR_ASSIGNMENT
+static void
+assign_assoc_from_kvlist (var, nlist, h, flags)
+     SHELL_VAR *var;
+     WORD_LIST *nlist;
+     HASH_TABLE *h;
+     int flags;
+{
+  WORD_LIST *list;
+  char *akey, *aval, *k, *v;
+  int free_aval;
+
+  for (list = nlist; list; list = list->next)
+    {
+      free_aval = 0;
+
+      k = list->word->word;
+      v = list->next ? list->next->word->word : 0;
+
+      if (list->next)
+        list = list->next;
+
+      akey = expand_assignment_string_to_string (k, 0);
+      aval = expand_assignment_string_to_string (v, 0);
+
+      if (akey == 0 || *akey == 0)
+	{
+	  err_badarraysub (k);
+	  FREE (akey);
+	  continue;
+	}	      
+      if (aval == 0)
+	{
+	  aval = (char *)xmalloc (1);
+	  aval[0] = '\0';	/* like do_assignment_internal */
+	  free_aval = 1;
+	}
+
+      bind_assoc_var_internal (var, h, akey, aval, flags);
+      if (free_aval)
+	free (aval);
+    }
+}
+#endif
+     
+/* Callers ensure that VAR is not NULL. Associative array assignments have not
+   been expanded when this is called, or have been expanded once and single-
+   quoted, so we don't have to scan through an unquoted expanded subscript to
+   find the ending bracket; indexed array assignments have been expanded and
+   possibly single-quoted to prevent further expansion.
+
+   If this is an associative array, we perform the assignments into NHASH and
+   set NHASH to be the value of VAR after processing the assignments in NLIST */
+void
+assign_compound_array_list (var, nlist, flags)
+     SHELL_VAR *var;
+     WORD_LIST *nlist;
+     int flags;
+{
+  ARRAY *a;
+  HASH_TABLE *h, *nhash;
+  WORD_LIST *list;
+  char *w, *val, *nval, *savecmd;
+  int len, iflags, free_val;
+  arrayind_t ind, last_ind;
+  char *akey;
+
+  a = (var && array_p (var)) ? array_cell (var) : (ARRAY *)0;
+  nhash = h = (var && assoc_p (var)) ? assoc_cell (var) : (HASH_TABLE *)0;
+
+  akey = (char *)0;
+  ind = 0;
+
+  /* Now that we are ready to assign values to the array, kill the existing
+     value. */
+  if ((flags & ASS_APPEND) == 0)
+    {
+      if (a && array_p (var))
+	array_flush (a);
+      else if (h && assoc_p (var))
+	nhash = assoc_create (h->nbuckets);
+    }
+
+  last_ind = (a && (flags & ASS_APPEND)) ? array_max_index (a) + 1 : 0;
+
+#if ASSOC_KVPAIR_ASSIGNMENT
+  if (assoc_p (var) && nlist && (nlist->word->flags & W_ASSIGNMENT) == 0 && nlist->word->word[0] != '[')	/*]*/
+    {
+      iflags = flags & ~ASS_APPEND;
+      assign_assoc_from_kvlist (var, nlist, nhash, iflags);
+      if (nhash && nhash != h)
+	{
+	  h = assoc_cell (var);
+	  var_setassoc (var, nhash);
+	  assoc_dispose (h);
+	}
+      return;
+    }
+#endif
+
+  for (list = nlist; list; list = list->next)
+    {
+      /* Don't allow var+=(values) to make assignments in VALUES append to
+	 existing values by default. */
+      iflags = flags & ~ASS_APPEND;
+      w = list->word->word;
+
+      /* We have a word of the form [ind]=value */
+      if ((list->word->flags & W_ASSIGNMENT) && w[0] == '[')
+	{
+	  /* Don't have to handle embedded quotes specially any more, since
+	     associative array subscripts have not been expanded yet (see
+	     above). */
+	  len = skipsubscript (w, 0, 0);
+
+	  /* XXX - changes for `+=' */
+ 	  if (w[len] != ']' || (w[len+1] != '=' && (w[len+1] != '+' || w[len+2] != '=')))
+	    {
+	      if (assoc_p (var))
+		{
+		  err_badarraysub (w);
+		  continue;
+		}
+	      nval = make_variable_value (var, w, flags);
+	      if (var->assign_func)
+		(*var->assign_func) (var, nval, last_ind, 0);
+	      else
+		array_insert (a, last_ind, nval);
+	      FREE (nval);
+	      last_ind++;
+	      continue;
+	    }
+
+	  if (len == 1)
+	    {
+	      err_badarraysub (w);
+	      continue;
+	    }
+
+	  if (ALL_ELEMENT_SUB (w[1]) && len == 2)
+	    {
+	      set_exit_status (EXECUTION_FAILURE);
+	      if (assoc_p (var))
+		report_error (_("%s: invalid associative array key"), w);
+	      else
+		report_error (_("%s: cannot assign to non-numeric index"), w);
+	      continue;
+	    }
+
+	  if (array_p (var))
+	    {
+	      ind = array_expand_index (var, w + 1, len, 0);
+	      /* negative subscripts to indexed arrays count back from end */
+	      if (ind < 0)
+		ind = array_max_index (array_cell (var)) + 1 + ind;
+	      if (ind < 0)
+		{
+		  err_badarraysub (w);
+		  continue;
+		}
+
+	      last_ind = ind;
+	    }
+	  else if (assoc_p (var))
+	    {
+	      /* This is not performed above, see expand_compound_array_assignment */
+	      w[len] = '\0';	/*[*/
+	      akey = expand_assignment_string_to_string (w+1, 0);
+	      w[len] = ']';
+	      /* And we need to expand the value also, see below */
+	      if (akey == 0 || *akey == 0)
+		{
+		  err_badarraysub (w);
+		  FREE (akey);
+		  continue;
+		}
+	    }
+
+	  /* XXX - changes for `+=' -- just accept the syntax.  ksh93 doesn't do this */
+	  if (w[len + 1] == '+' && w[len + 2] == '=')
+	    {
+	      iflags |= ASS_APPEND;
+	      val = w + len + 3;
+	    }
+	  else
+	    val = w + len + 2;	    
+	}
+      else if (assoc_p (var))
+	{
+	  set_exit_status (EXECUTION_FAILURE);
+	  report_error (_("%s: %s: must use subscript when assigning associative array"), var->name, w);
+	  continue;
+	}
+      else		/* No [ind]=value, just a stray `=' */
+	{
+	  ind = last_ind;
+	  val = w;
+	}
+
+      free_val = 0;
+      /* See above; we need to expand the value here */
+      if (assoc_p (var))
+	{
+	  val = expand_assignment_string_to_string (val, 0);
+	  if (val == 0)
+	    {
+	      val = (char *)xmalloc (1);
+	      val[0] = '\0';	/* like do_assignment_internal */
+	    }
+	  free_val = 1;
+	}
+
+      savecmd = this_command_name;
+      if (integer_p (var))
+	this_command_name = (char *)NULL;	/* no command name for errors */
+      if (assoc_p (var))
+	bind_assoc_var_internal (var, nhash, akey, val, iflags);
+      else
+	bind_array_var_internal (var, ind, akey, val, iflags);
+      last_ind++;
+      this_command_name = savecmd;
+
+      if (free_val)
+	free (val);
+    }
+
+  if (assoc_p (var) && nhash && nhash != h)
+    {
+      h = assoc_cell (var);
+      var_setassoc (var, nhash);
+      assoc_dispose (h);
+    }
+}
+
+/* Perform a compound array assignment:  VAR->name=( VALUE ).  The
+   VALUE has already had the parentheses stripped. */
+SHELL_VAR *
+assign_array_var_from_string (var, value, flags)
+     SHELL_VAR *var;
+     char *value;
+     int flags;
+{
+  WORD_LIST *nlist;
+
+  if (value == 0)
+    return var;
+
+  nlist = expand_compound_array_assignment (var, value, flags);
+  assign_compound_array_list (var, nlist, flags);
+
+  if (nlist)
+    dispose_words (nlist);
+
+  if (var)
+    VUNSETATTR (var, att_invisible);	/* no longer invisible */
+
+  return (var);
+}
+
+/* Quote globbing chars and characters in $IFS before the `=' in an assignment
+   statement (usually a compound array assignment) to protect them from
+   unwanted filename expansion or word splitting. */
+static char *
+quote_assign (string)
+     const char *string;
+{
+  size_t slen;
+  int saw_eq;
+  char *temp, *t, *subs;
+  const char *s, *send;
+  int ss, se;
+  DECLARE_MBSTATE;
+
+  slen = strlen (string);
+  send = string + slen;
+
+  t = temp = (char *)xmalloc (slen * 2 + 1);
+  saw_eq = 0;
+  for (s = string; *s; )
+    {
+      if (*s == '=')
+	saw_eq = 1;
+      if (saw_eq == 0 && *s == '[')		/* looks like a subscript */
+	{
+	  ss = s - string;
+	  se = skipsubscript (string, ss, 0);
+	  subs = substring (s, ss, se);
+	  *t++ = '\\';
+	  strcpy (t, subs);
+	  t += se - ss;
+	  *t++ = '\\';
+	  *t++ = ']';
+	  s += se + 1;
+	  free (subs);
+	  continue;
+	}
+      if (saw_eq == 0 && (glob_char_p (s) || isifs (*s)))
+	*t++ = '\\';
+
+      COPY_CHAR_P (t, s, send);
+    }
+  *t = '\0';
+  return temp;
+}
+
+/* Take a word W of the form [IND]=VALUE and transform it to ['IND']='VALUE'
+   to prevent further expansion. This is called for compound assignments to
+   indexed arrays. W has already undergone word expansions. If W has no [IND]=,
+   just single-quote and return it. */
+static char *
+quote_compound_array_word (w, type)
+     char *w;
+     int type;
+{
+  char *nword, *sub, *value, *t;
+  int ind, wlen, i;
+
+  if (w[0] != LBRACK)
+    return (sh_single_quote (w));
+  ind = skipsubscript (w, 0, 0);
+  if (w[ind] != RBRACK)
+    return (sh_single_quote (w));
+
+  wlen = strlen (w);
+  w[ind] = '\0';
+  sub = sh_single_quote (w+1);
+  w[ind] = RBRACK;
+
+  nword = xmalloc (wlen * 4 + 5);	/* wlen*4 is max single quoted length */
+  nword[0] = LBRACK;
+  i = STRLEN (sub);
+  memcpy (nword+1, sub, i);
+  i++;				/* accommodate the opening LBRACK */
+  nword[i++] = w[ind++];	/* RBRACK */
+  if (w[ind] == '+')
+    nword[i++] = w[ind++];
+  nword[i++] = w[ind++];
+  value = sh_single_quote (w + ind);
+  strcpy (nword + i, value);
+
+  return nword;
+}
+
+/* Expand the key and value in W, which is of the form [KEY]=VALUE, and
+   reconstruct W with the expanded and single-quoted version:
+   ['expanded-key']='expanded-value'. If there is no [KEY]=, single-quote the
+   word and return it. Very similar to previous function, but does not assume
+   W has already been expanded, and expands the KEY and VALUE separately.
+   Used for compound assignments to associative arrays that are arguments to
+   declaration builtins (declare -A a=( list )). */
+char *
+expand_and_quote_assoc_word (w, type)
+     char *w;
+     int type;
+{
+  char *nword, *key, *value, *t;
+  int ind, wlen, i;
+
+  if (w[0] != LBRACK)
+    return (sh_single_quote (w));     
+  ind = skipsubscript (w, 0, 0);
+  if (w[ind] != RBRACK)
+    return (sh_single_quote (w));
+
+  w[ind] = '\0';
+  t = expand_assignment_string_to_string (w+1, 0);
+  w[ind] = RBRACK;
+  key = sh_single_quote (t ? t : "");
+  free (t);
+
+  wlen = STRLEN (key);
+  nword = xmalloc (wlen + 5);
+  nword[0] = LBRACK;
+  memcpy (nword+1, key, wlen);
+  i = wlen + 1;			/* accommodate the opening LBRACK */
+
+  nword[i++] = w[ind++];	/* RBRACK */
+  if (w[ind] == '+')
+    nword[i++] = w[ind++];
+  nword[i++] = w[ind++];
+
+  t = expand_assignment_string_to_string (w+ind, 0);
+  value = sh_single_quote (t ? t : "");
+  free (t);
+  nword = xrealloc (nword, wlen + 5 + STRLEN (value));
+  strcpy (nword + i, value);
+
+  free (key);
+  free (value);
+
+  return nword;
+}
+
+/* For each word in a compound array assignment, if the word looks like
+   [ind]=value, single-quote ind and value, but leave the brackets and
+   the = sign (and any `+') alone. If it's not an assignment, just single-
+   quote the word. This is used for indexed arrays. */
+void
+quote_compound_array_list (list, type)
+     WORD_LIST *list;
+     int type;
+{
+  char *t;
+  WORD_LIST *l;
+
+  for (l = list; l; l = l->next)
+    {
+      if (l->word == 0 || l->word->word == 0)
+	continue;	/* should not happen, but just in case... */
+      if ((l->word->flags & W_ASSIGNMENT) == 0)
+	t = sh_single_quote (l->word->word);
+      else 
+	t = quote_compound_array_word (l->word->word, type);
+      free (l->word->word);
+      l->word->word = t;
+    }
+}
+
+/* For each word in a compound array assignment, if the word looks like
+   [ind]=value, quote globbing chars and characters in $IFS before the `='. */
+static void
+quote_array_assignment_chars (list)
+     WORD_LIST *list;
+{
+  char *nword;
+  WORD_LIST *l;
+
+  for (l = list; l; l = l->next)
+    {
+      if (l->word == 0 || l->word->word == 0 || l->word->word[0] == '\0')
+	continue;	/* should not happen, but just in case... */
+      /* Don't bother if it hasn't been recognized as an assignment or
+	 doesn't look like [ind]=value */
+      if ((l->word->flags & W_ASSIGNMENT) == 0)
+	continue;
+      if (l->word->word[0] != '[' || mbschr (l->word->word, '=') == 0) /* ] */
+	continue;
+
+      nword = quote_assign (l->word->word);
+      free (l->word->word);
+      l->word->word = nword;
+      l->word->flags |= W_NOGLOB;	/* XXX - W_NOSPLIT also? */
+    }
+}
+
+/* skipsubscript moved to subst.c to use private functions. 2009/02/24. */
+
+/* This function is called with SUB pointing to just after the beginning
+   `[' of an array subscript and removes the array element to which SUB
+   expands from array VAR.  A subscript of `*' or `@' unsets the array. */
+/* If FLAGS&1 we don't expand the subscript; we just use it as-is. */
+int
+unbind_array_element (var, sub, flags)
+     SHELL_VAR *var;
+     char *sub;
+     int flags;
+{
+  int len;
+  arrayind_t ind;
+  char *akey;
+  ARRAY_ELEMENT *ae;
+
+  len = skipsubscript (sub, 0, (flags&1) || (var && assoc_p(var)));	/* XXX */
+  if (sub[len] != ']' || len == 0)
+    {
+      builtin_error ("%s[%s: %s", var->name, sub, _(bash_badsub_errmsg));
+      return -1;
+    }
+  sub[len] = '\0';
+
+  if (ALL_ELEMENT_SUB (sub[0]) && sub[1] == 0)
+    {
+      if (array_p (var) || assoc_p (var))
+	{
+	  unbind_variable (var->name);	/* XXX -- {array,assoc}_flush ? */
+	  return (0);
+	}
+      else
+	return -2;	/* don't allow this to unset scalar variables */
+    }
+
+  if (assoc_p (var))
+    {
+      akey = (flags & 1) ? sub : expand_assignment_string_to_string (sub, 0);
+      if (akey == 0 || *akey == 0)
+	{
+	  builtin_error ("[%s]: %s", sub, _(bash_badsub_errmsg));
+	  FREE (akey);
+	  return -1;
+	}
+      assoc_remove (assoc_cell (var), akey);
+      if (akey != sub)
+	free (akey);
+    }
+  else if (array_p (var))
+    {
+      ind = array_expand_index (var, sub, len+1, 0);
+      /* negative subscripts to indexed arrays count back from end */
+      if (ind < 0)
+	ind = array_max_index (array_cell (var)) + 1 + ind;
+      if (ind < 0)
+	{
+	  builtin_error ("[%s]: %s", sub, _(bash_badsub_errmsg));
+	  return -1;
+	}
+      ae = array_remove (array_cell (var), ind);
+      if (ae)
+	array_dispose_element (ae);
+    }
+  else	/* array_p (var) == 0 && assoc_p (var) == 0 */
+    {
+      akey = this_command_name;
+      ind = array_expand_index (var, sub, len+1, 0);
+      this_command_name = akey;
+      if (ind == 0)
+	{
+	  unbind_variable (var->name);
+	  return (0);
+	}
+      else
+	return -2;	/* any subscript other than 0 is invalid with scalar variables */
+    }
+
+  return 0;
+}
+
+/* Format and output an array assignment in compound form VAR=(VALUES),
+   suitable for re-use as input. */
+void
+print_array_assignment (var, quoted)
+     SHELL_VAR *var;
+     int quoted;
+{
+  char *vstr;
+
+  vstr = array_to_assign (array_cell (var), quoted);
+
+  if (vstr == 0)
+    printf ("%s=%s\n", var->name, quoted ? "'()'" : "()");
+  else
+    {
+      printf ("%s=%s\n", var->name, vstr);
+      free (vstr);
+    }
+}
+
+/* Format and output an associative array assignment in compound form
+   VAR=(VALUES), suitable for re-use as input. */
+void
+print_assoc_assignment (var, quoted)
+     SHELL_VAR *var;
+     int quoted;
+{
+  char *vstr;
+
+  vstr = assoc_to_assign (assoc_cell (var), quoted);
+
+  if (vstr == 0)
+    printf ("%s=%s\n", var->name, quoted ? "'()'" : "()");
+  else
+    {
+      printf ("%s=%s\n", var->name, vstr);
+      free (vstr);
+    }
+}
+
+/***********************************************************************/
+/*								       */
+/* Utility functions to manage arrays and their contents for expansion */
+/*								       */
+/***********************************************************************/
+
+/* Return 1 if NAME is a properly-formed array reference v[sub]. */
+
+/* We need to reserve 1 for FLAGS, which we pass to skipsubscript. */
+int
+valid_array_reference (name, flags)
+     const char *name;
+     int flags;
+{
+  char *t;
+  int r, len, isassoc;
+  SHELL_VAR *entry;
+
+  t = mbschr (name, '[');	/* ] */
+  isassoc = 0;
+  if (t)
+    {
+      *t = '\0';
+      r = legal_identifier (name);
+      if (flags & VA_NOEXPAND)	/* Don't waste a lookup if we don't need one */
+	isassoc = (entry = find_variable (name)) && assoc_p (entry);      
+      *t = '[';
+      if (r == 0)
+	return 0;
+
+      if (isassoc && ((flags & (VA_NOEXPAND|VA_ONEWORD)) == (VA_NOEXPAND|VA_ONEWORD)))
+	len = strlen (t) - 1;
+      else if (isassoc)
+	len = skipsubscript (t, 0, flags&VA_NOEXPAND);	/* VA_NOEXPAND must be 1 */
+      else
+	/* Check for a properly-terminated non-null subscript. */
+	len = skipsubscript (t, 0, 0);		/* arithmetic expression */
+
+      if (t[len] != ']' || len == 1 || t[len+1] != '\0')
+	return 0;
+
+#if 0
+      /* Could check and allow subscripts consisting only of whitespace for
+	 existing associative arrays, using isassoc */
+      for (r = 1; r < len; r++)
+	if (whitespace (t[r]) == 0)
+	  return 1;
+      return 0;
+#else
+      /* This allows blank subscripts */
+      return 1;
+#endif
+    }
+  return 0;
+}
+
+/* Expand the array index beginning at S and extending LEN characters. */
+arrayind_t
+array_expand_index (var, s, len, flags)
+     SHELL_VAR *var;
+     char *s;
+     int len;
+     int flags;
+{
+  char *exp, *t, *savecmd;
+  int expok;
+  arrayind_t val;
+
+  exp = (char *)xmalloc (len);
+  strncpy (exp, s, len - 1);
+  exp[len - 1] = '\0';
+#if 0	/* TAG: maybe bash-5.2 */
+  if ((flags & AV_NOEXPAND) == 0)
+    t = expand_arith_string (exp, Q_DOUBLE_QUOTES|Q_ARITH|Q_ARRAYSUB);	/* XXX - Q_ARRAYSUB for future use */
+  else
+    t = exp;
+#endif
+  t = expand_arith_string (exp, Q_DOUBLE_QUOTES|Q_ARITH|Q_ARRAYSUB);	/* XXX - Q_ARRAYSUB for future use */
+  savecmd = this_command_name;
+  this_command_name = (char *)NULL;
+  val = evalexp (t, EXP_EXPANDED, &expok);	/* XXX - was 0 but we expanded exp already */
+  this_command_name = savecmd;
+  if (t != exp)
+    free (t);
+  free (exp);
+  if (expok == 0)
+    {
+      set_exit_status (EXECUTION_FAILURE);
+
+      if (no_longjmp_on_fatal_error)
+	return 0;
+      top_level_cleanup ();      
+      jump_to_top_level (DISCARD);
+    }
+  return val;
+}
+
+/* Return the name of the variable specified by S without any subscript.
+   If SUBP is non-null, return a pointer to the start of the subscript
+   in *SUBP. If LENP is non-null, the length of the subscript is returned
+   in *LENP.  This returns newly-allocated memory. */
+char *
+array_variable_name (s, flags, subp, lenp)
+     const char *s;
+     int flags;
+     char **subp;
+     int *lenp;
+{
+  char *t, *ret;
+  int ind, ni;
+
+  t = mbschr (s, '[');
+  if (t == 0)
+    {
+      if (subp)
+      	*subp = t;
+      if (lenp)
+	*lenp = 0;
+      return ((char *)NULL);
+    }
+  ind = t - s;
+  ni = skipsubscript (s, ind, flags);	/* XXX - was 0 not flags */
+  if (ni <= ind + 1 || s[ni] != ']')
+    {
+      err_badarraysub (s);
+      if (subp)
+      	*subp = t;
+      if (lenp)
+	*lenp = 0;
+      return ((char *)NULL);
+    }
+
+  *t = '\0';
+  ret = savestring (s);
+  *t++ = '[';		/* ] */
+
+  if (subp)
+    *subp = t;
+  if (lenp)
+    *lenp = ni - ind;
+
+  return ret;
+}
+
+/* Return the variable specified by S without any subscript.  If SUBP is
+   non-null, return a pointer to the start of the subscript in *SUBP.
+   If LENP is non-null, the length of the subscript is returned in *LENP. */
+SHELL_VAR *
+array_variable_part (s, flags, subp, lenp)
+     const char *s;
+     int flags;
+     char **subp;
+     int *lenp;
+{
+  char *t;
+  SHELL_VAR *var;
+
+  t = array_variable_name (s, flags, subp, lenp);
+  if (t == 0)
+    return ((SHELL_VAR *)NULL);
+  var = find_variable (t);		/* XXX - handle namerefs here? */
+
+  free (t);
+  return var;	/* now return invisible variables; caller must handle */
+}
+
+#define INDEX_ERROR() \
+  do \
+    { \
+      if (var) \
+	err_badarraysub (var->name); \
+      else \
+	{ \
+	  t[-1] = '\0'; \
+	  err_badarraysub (s); \
+	  t[-1] = '[';	/* ] */\
+	} \
+      return ((char *)NULL); \
+    } \
+  while (0)
+
+/* Return a string containing the elements in the array and subscript
+   described by S.  If the subscript is * or @, obeys quoting rules akin
+   to the expansion of $* and $@ including double quoting.  If RTYPE
+   is non-null it gets 1 if the array reference is name[*], 2 if the
+   reference is name[@], and 0 otherwise. */
+static char *
+array_value_internal (s, quoted, flags, rtype, indp)
+     const char *s;
+     int quoted, flags, *rtype;
+     arrayind_t *indp;
+{
+  int len;
+  arrayind_t ind;
+  char *akey;
+  char *retval, *t, *temp;
+  WORD_LIST *l;
+  SHELL_VAR *var;
+
+  var = array_variable_part (s, (flags&AV_NOEXPAND) ? 1 : 0, &t, &len);	/* XXX */
+
+  /* Expand the index, even if the variable doesn't exist, in case side
+     effects are needed, like ${w[i++]} where w is unset. */
+#if 0
+  if (var == 0)
+    return (char *)NULL;
+#endif
+
+  if (len == 0)
+    return ((char *)NULL);	/* error message already printed */
+
+  /* [ */
+  akey = 0;
+  if (ALL_ELEMENT_SUB (t[0]) && t[1] == ']')
+    {
+      if (rtype)
+	*rtype = (t[0] == '*') ? 1 : 2;
+      if ((flags & AV_ALLOWALL) == 0)
+	{
+	  err_badarraysub (s);
+	  return ((char *)NULL);
+	}
+      else if (var == 0 || value_cell (var) == 0)	/* XXX - check for invisible_p(var) ? */
+	return ((char *)NULL);
+      else if (invisible_p (var))
+	return ((char *)NULL);
+      else if (array_p (var) == 0 && assoc_p (var) == 0)
+	l = add_string_to_list (value_cell (var), (WORD_LIST *)NULL);
+      else if (assoc_p (var))
+	{
+	  l = assoc_to_word_list (assoc_cell (var));
+	  if (l == (WORD_LIST *)NULL)
+	    return ((char *)NULL);
+	}
+      else
+	{
+	  l = array_to_word_list (array_cell (var));
+	  if (l == (WORD_LIST *)NULL)
+	    return ((char *) NULL);
+	}
+
+      /* Caller of array_value takes care of inspecting rtype and duplicating
+	 retval if rtype == 0, so this is not a memory leak */
+      if (t[0] == '*' && (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)))
+	{
+	  temp = string_list_dollar_star (l, quoted, (flags & AV_ASSIGNRHS) ? PF_ASSIGNRHS : 0);
+	  retval = quote_string (temp);
+	  free (temp);
+	}
+      else	/* ${name[@]} or unquoted ${name[*]} */
+	retval = string_list_dollar_at (l, quoted, (flags & AV_ASSIGNRHS) ? PF_ASSIGNRHS : 0);
+
+      dispose_words (l);
+    }
+  else
+    {
+      if (rtype)
+	*rtype = 0;
+      if (var == 0 || array_p (var) || assoc_p (var) == 0)
+	{
+	  if ((flags & AV_USEIND) == 0 || indp == 0)
+	    {
+	      ind = array_expand_index (var, t, len, flags);
+	      if (ind < 0)
+		{
+		  /* negative subscripts to indexed arrays count back from end */
+		  if (var && array_p (var))
+		    ind = array_max_index (array_cell (var)) + 1 + ind;
+		  if (ind < 0)
+		    INDEX_ERROR();
+		}
+	      if (indp)
+		*indp = ind;
+	    }
+	  else if (indp)
+	    ind = *indp;
+	}
+      else if (assoc_p (var))
+	{
+	  t[len - 1] = '\0';
+	  if ((flags & AV_NOEXPAND) == 0)
+	    akey = expand_assignment_string_to_string (t, 0);	/* [ */
+	  else
+	    akey = savestring (t);
+	  t[len - 1] = ']';
+	  if (akey == 0 || *akey == 0)
+	    {
+	      FREE (akey);
+	      INDEX_ERROR();
+	    }
+	}
+     
+      if (var == 0 || value_cell (var) == 0)	/* XXX - check invisible_p(var) ? */
+	{
+          FREE (akey);
+	  return ((char *)NULL);
+	}
+      else if (invisible_p (var))
+	{
+          FREE (akey);
+	  return ((char *)NULL);
+	}
+      if (array_p (var) == 0 && assoc_p (var) == 0)
+	return (ind == 0 ? value_cell (var) : (char *)NULL);
+      else if (assoc_p (var))
+        {
+	  retval = assoc_reference (assoc_cell (var), akey);
+	  free (akey);
+        }
+      else
+	retval = array_reference (array_cell (var), ind);
+    }
+
+  return retval;
+}
+
+/* Return a string containing the elements described by the array and
+   subscript contained in S, obeying quoting for subscripts * and @. */
+char *
+array_value (s, quoted, flags, rtype, indp)
+     const char *s;
+     int quoted, flags, *rtype;
+     arrayind_t *indp;
+{
+  return (array_value_internal (s, quoted, flags|AV_ALLOWALL, rtype, indp));
+}
+
+/* Return the value of the array indexing expression S as a single string.
+   If (FLAGS & AV_ALLOWALL) is 0, do not allow `@' and `*' subscripts.  This
+   is used by other parts of the shell such as the arithmetic expression
+   evaluator in expr.c. */
+char *
+get_array_value (s, flags, rtype, indp)
+     const char *s;
+     int flags, *rtype;
+     arrayind_t *indp;
+{
+  return (array_value_internal (s, 0, flags, rtype, indp));
+}
+
+char *
+array_keys (s, quoted, pflags)
+     char *s;
+     int quoted, pflags;
+{
+  int len;
+  char *retval, *t, *temp;
+  WORD_LIST *l;
+  SHELL_VAR *var;
+
+  var = array_variable_part (s, 0, &t, &len);
+
+  /* [ */
+  if (var == 0 || ALL_ELEMENT_SUB (t[0]) == 0 || t[1] != ']')
+    return (char *)NULL;
+
+  if (var_isset (var) == 0 || invisible_p (var))
+    return (char *)NULL;
+
+  if (array_p (var) == 0 && assoc_p (var) == 0)
+    l = add_string_to_list ("0", (WORD_LIST *)NULL);
+  else if (assoc_p (var))
+    l = assoc_keys_to_word_list (assoc_cell (var));
+  else
+    l = array_keys_to_word_list (array_cell (var));
+  if (l == (WORD_LIST *)NULL)
+    return ((char *) NULL);
+
+  retval = string_list_pos_params (t[0], l, quoted, pflags);
+
+  dispose_words (l);
+  return retval;
+}
+#endif /* ARRAY_VARS */
diff --git a/arrayfunc.h b/arrayfunc.h
new file mode 100644
index 0000000..c2bbb98
--- /dev/null
+++ b/arrayfunc.h
@@ -0,0 +1,97 @@
+/* arrayfunc.h -- declarations for miscellaneous array functions in arrayfunc.c */
+
+/* Copyright (C) 2001-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_ARRAYFUNC_H_)
+#define _ARRAYFUNC_H_
+
+/* Must include variables.h before including this file. */
+
+#if defined (ARRAY_VARS)
+
+/* This variable means to not expand associative array subscripts more than
+   once, when performing variable expansion. */
+extern int assoc_expand_once;
+
+/* The analog for indexed array subscripts */
+extern int array_expand_once;
+
+/* Flags for array_value_internal and callers array_value/get_array_value */
+#define AV_ALLOWALL	0x001
+#define AV_QUOTED	0x002
+#define AV_USEIND	0x004
+#define AV_USEVAL	0x008	/* XXX - should move this */
+#define AV_ASSIGNRHS	0x010	/* no splitting, special case ${a[@]} */
+#define AV_NOEXPAND	0x020	/* don't run assoc subscripts through word expansion */
+
+/* Flags for valid_array_reference. Value 1 is reserved for skipsubscript() */
+#define VA_NOEXPAND	0x001
+#define VA_ONEWORD	0x002
+
+extern SHELL_VAR *convert_var_to_array PARAMS((SHELL_VAR *));
+extern SHELL_VAR *convert_var_to_assoc PARAMS((SHELL_VAR *));
+
+extern char *make_array_variable_value PARAMS((SHELL_VAR *, arrayind_t, char *, char *, int));
+
+extern SHELL_VAR *bind_array_variable PARAMS((char *, arrayind_t, char *, int));
+extern SHELL_VAR *bind_array_element PARAMS((SHELL_VAR *, arrayind_t, char *, int));
+extern SHELL_VAR *assign_array_element PARAMS((char *, char *, int));
+
+extern SHELL_VAR *bind_assoc_variable PARAMS((SHELL_VAR *, char *, char *, char *, int));
+
+extern SHELL_VAR *find_or_make_array_variable PARAMS((char *, int));
+
+extern SHELL_VAR *assign_array_from_string  PARAMS((char *, char *, int));
+extern SHELL_VAR *assign_array_var_from_word_list PARAMS((SHELL_VAR *, WORD_LIST *, int));
+
+extern WORD_LIST *expand_compound_array_assignment PARAMS((SHELL_VAR *, char *, int));
+extern void assign_compound_array_list PARAMS((SHELL_VAR *, WORD_LIST *, int));
+extern SHELL_VAR *assign_array_var_from_string PARAMS((SHELL_VAR *, char *, int));
+
+extern char *expand_and_quote_assoc_word PARAMS((char *, int));
+extern void quote_compound_array_list PARAMS((WORD_LIST *, int));
+
+extern int unbind_array_element PARAMS((SHELL_VAR *, char *, int));
+extern int skipsubscript PARAMS((const char *, int, int));
+
+extern void print_array_assignment PARAMS((SHELL_VAR *, int));
+extern void print_assoc_assignment PARAMS((SHELL_VAR *, int));
+
+extern arrayind_t array_expand_index PARAMS((SHELL_VAR *, char *, int, int));
+extern int valid_array_reference PARAMS((const char *, int));
+extern char *array_value PARAMS((const char *, int, int, int *, arrayind_t *));
+extern char *get_array_value PARAMS((const char *, int, int *, arrayind_t *));
+
+extern char *array_keys PARAMS((char *, int, int));
+
+extern char *array_variable_name PARAMS((const char *, int, char **, int *));
+extern SHELL_VAR *array_variable_part PARAMS((const char *, int, char **, int *));
+
+#else
+
+#define AV_ALLOWALL	0
+#define AV_QUOTED	0
+#define AV_USEIND	0
+#define AV_ASSIGNRHS	0
+
+#define VA_ONEWORD	0
+
+#endif
+
+#endif /* !_ARRAYFUNC_H_ */
diff --git a/assoc.c b/assoc.c
new file mode 100644
index 0000000..5782e85
--- /dev/null
+++ b/assoc.c
@@ -0,0 +1,587 @@
+/*
+ * assoc.c - functions to manipulate associative arrays
+ *
+ * Associative arrays are standard shell hash tables.
+ *
+ * Chet Ramey
+ * chet@ins.cwru.edu
+ */
+
+/* Copyright (C) 2008,2009,2011-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#if defined (ARRAY_VARS)
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include "bashansi.h"
+
+#include "shell.h"
+#include "array.h"
+#include "assoc.h"
+#include "builtins/common.h"
+
+static WORD_LIST *assoc_to_word_list_internal PARAMS((HASH_TABLE *, int));
+
+/* assoc_create == hash_create */
+
+void
+assoc_dispose (hash)
+     HASH_TABLE *hash;
+{
+  if (hash)
+    {
+      hash_flush (hash, 0);
+      hash_dispose (hash);
+    }
+}
+
+void
+assoc_flush (hash)
+     HASH_TABLE *hash;
+{
+  hash_flush (hash, 0);
+}
+
+int
+assoc_insert (hash, key, value)
+     HASH_TABLE *hash;
+     char *key;
+     char *value;
+{
+  BUCKET_CONTENTS *b;
+
+  b = hash_search (key, hash, HASH_CREATE);
+  if (b == 0)
+    return -1;
+  /* If we are overwriting an existing element's value, we're not going to
+     use the key.  Nothing in the array assignment code path frees the key
+     string, so we can free it here to avoid a memory leak. */
+  if (b->key != key)
+    free (key);
+  FREE (b->data);
+  b->data = value ? savestring (value) : (char *)0;
+  return (0);
+}
+
+/* Like assoc_insert, but returns b->data instead of freeing it */
+PTR_T
+assoc_replace (hash, key, value)
+     HASH_TABLE *hash;
+     char *key;
+     char *value;
+{
+  BUCKET_CONTENTS *b;
+  PTR_T t;
+
+  b = hash_search (key, hash, HASH_CREATE);
+  if (b == 0)
+    return (PTR_T)0;
+  /* If we are overwriting an existing element's value, we're not going to
+     use the key.  Nothing in the array assignment code path frees the key
+     string, so we can free it here to avoid a memory leak. */
+  if (b->key != key)
+    free (key);
+  t = b->data;
+  b->data = value ? savestring (value) : (char *)0;
+  return t;
+}
+
+void
+assoc_remove (hash, string)
+     HASH_TABLE *hash;
+     char *string;
+{
+  BUCKET_CONTENTS *b;
+
+  b = hash_remove (string, hash, 0);
+  if (b)
+    {
+      free ((char *)b->data);
+      free (b->key);
+      free (b);
+    }
+}
+
+char *
+assoc_reference (hash, string)
+     HASH_TABLE *hash;
+     char *string;
+{
+  BUCKET_CONTENTS *b;
+
+  if (hash == 0)
+    return (char *)0;
+
+  b = hash_search (string, hash, 0);
+  return (b ? (char *)b->data : 0);
+}
+
+/* Quote the data associated with each element of the hash table ASSOC,
+   using quote_string */
+HASH_TABLE *
+assoc_quote (h)
+     HASH_TABLE *h;
+{
+  int i;
+  BUCKET_CONTENTS *tlist;
+  char *t;
+
+  if (h == 0 || assoc_empty (h))
+    return ((HASH_TABLE *)NULL);
+  
+  for (i = 0; i < h->nbuckets; i++)
+    for (tlist = hash_items (i, h); tlist; tlist = tlist->next)
+      {
+	t = quote_string ((char *)tlist->data);
+	FREE (tlist->data);
+	tlist->data = t;
+      }
+
+  return h;
+}
+
+/* Quote escape characters in the data associated with each element
+   of the hash table ASSOC, using quote_escapes */
+HASH_TABLE *
+assoc_quote_escapes (h)
+     HASH_TABLE *h;
+{
+  int i;
+  BUCKET_CONTENTS *tlist;
+  char *t;
+
+  if (h == 0 || assoc_empty (h))
+    return ((HASH_TABLE *)NULL);
+  
+  for (i = 0; i < h->nbuckets; i++)
+    for (tlist = hash_items (i, h); tlist; tlist = tlist->next)
+      {
+	t = quote_escapes ((char *)tlist->data);
+	FREE (tlist->data);
+	tlist->data = t;
+      }
+
+  return h;
+}
+
+HASH_TABLE *
+assoc_dequote (h)
+     HASH_TABLE *h;
+{
+  int i;
+  BUCKET_CONTENTS *tlist;
+  char *t;
+
+  if (h == 0 || assoc_empty (h))
+    return ((HASH_TABLE *)NULL);
+  
+  for (i = 0; i < h->nbuckets; i++)
+    for (tlist = hash_items (i, h); tlist; tlist = tlist->next)
+      {
+	t = dequote_string ((char *)tlist->data);
+	FREE (tlist->data);
+	tlist->data = t;
+      }
+
+  return h;
+}
+
+HASH_TABLE *
+assoc_dequote_escapes (h)
+     HASH_TABLE *h;
+{
+  int i;
+  BUCKET_CONTENTS *tlist;
+  char *t;
+
+  if (h == 0 || assoc_empty (h))
+    return ((HASH_TABLE *)NULL);
+  
+  for (i = 0; i < h->nbuckets; i++)
+    for (tlist = hash_items (i, h); tlist; tlist = tlist->next)
+      {
+	t = dequote_escapes ((char *)tlist->data);
+	FREE (tlist->data);
+	tlist->data = t;
+      }
+
+  return h;
+}
+
+HASH_TABLE *
+assoc_remove_quoted_nulls (h)
+     HASH_TABLE *h;
+{
+  int i;
+  BUCKET_CONTENTS *tlist;
+  char *t;
+
+  if (h == 0 || assoc_empty (h))
+    return ((HASH_TABLE *)NULL);
+  
+  for (i = 0; i < h->nbuckets; i++)
+    for (tlist = hash_items (i, h); tlist; tlist = tlist->next)
+      {
+	t = remove_quoted_nulls ((char *)tlist->data);
+	tlist->data = t;
+      }
+
+  return h;
+}
+
+/*
+ * Return a string whose elements are the members of array H beginning at
+ * the STARTth element and spanning NELEM members.  Null elements are counted.
+ */
+char *
+assoc_subrange (hash, start, nelem, starsub, quoted, pflags)
+     HASH_TABLE *hash;
+     arrayind_t start, nelem;
+     int starsub, quoted, pflags;
+{
+  WORD_LIST *l, *save, *h, *t;
+  int i, j;
+  char *ret;
+
+  if (assoc_empty (hash))
+    return ((char *)NULL);
+
+  save = l = assoc_to_word_list (hash);
+  if (save == 0)
+    return ((char *)NULL);
+
+  for (i = 1; l && i < start; i++)
+    l = l->next;
+  if (l == 0)
+    {
+      dispose_words (save);
+      return ((char *)NULL);
+    }
+  for (j = 0,h = t = l; l && j < nelem; j++)
+    {
+      t = l;
+      l = l->next;
+    }
+
+  t->next = (WORD_LIST *)NULL;
+
+  ret = string_list_pos_params (starsub ? '*' : '@', h, quoted, pflags);
+
+  if (t != l)
+    t->next = l;
+
+  dispose_words (save);
+  return (ret);
+
+}
+
+char *
+assoc_patsub (h, pat, rep, mflags)
+     HASH_TABLE *h;
+     char *pat, *rep;
+     int mflags;
+{
+  char	*t;
+  int pchar, qflags, pflags;
+  WORD_LIST *wl, *save;
+
+  if (h == 0 || assoc_empty (h))
+    return ((char *)NULL);
+
+  wl = assoc_to_word_list (h);
+  if (wl == 0)
+    return (char *)NULL;
+
+  for (save = wl; wl; wl = wl->next)
+    {
+      t = pat_subst (wl->word->word, pat, rep, mflags);
+      FREE (wl->word->word);
+      wl->word->word = t;
+    }
+
+  pchar = (mflags & MATCH_STARSUB) == MATCH_STARSUB ? '*' : '@';
+  qflags = (mflags & MATCH_QUOTED) == MATCH_QUOTED ? Q_DOUBLE_QUOTES : 0;
+  pflags = (mflags & MATCH_ASSIGNRHS) == MATCH_ASSIGNRHS ? PF_ASSIGNRHS : 0;
+
+  t = string_list_pos_params (pchar, save, qflags, pflags);
+  dispose_words (save);
+
+  return t;
+}
+
+char *
+assoc_modcase (h, pat, modop, mflags)
+     HASH_TABLE *h;
+     char *pat;
+     int modop;
+     int mflags;
+{
+  char	*t;
+  int pchar, qflags, pflags;
+  WORD_LIST *wl, *save;
+
+  if (h == 0 || assoc_empty (h))
+    return ((char *)NULL);
+
+  wl = assoc_to_word_list (h);
+  if (wl == 0)
+    return ((char *)NULL);
+
+  for (save = wl; wl; wl = wl->next)
+    {
+      t = sh_modcase (wl->word->word, pat, modop);
+      FREE (wl->word->word);
+      wl->word->word = t;
+    }
+
+  pchar = (mflags & MATCH_STARSUB) == MATCH_STARSUB ? '*' : '@';
+  qflags = (mflags & MATCH_QUOTED) == MATCH_QUOTED ? Q_DOUBLE_QUOTES : 0;
+  pflags = (mflags & MATCH_ASSIGNRHS) == MATCH_ASSIGNRHS ? PF_ASSIGNRHS : 0;
+
+  t = string_list_pos_params (pchar, save, qflags, pflags);
+  dispose_words (save);
+
+  return t;
+}
+
+char *
+assoc_to_kvpair (hash, quoted)
+     HASH_TABLE *hash;
+     int quoted;
+{
+  char *ret;
+  char *istr, *vstr;
+  int i, rsize, rlen, elen;
+  BUCKET_CONTENTS *tlist;
+
+  if (hash == 0 || assoc_empty (hash))
+    return (char *)0;
+
+  ret = xmalloc (rsize = 128);
+  ret[rlen = 0] = '\0';
+
+  for (i = 0; i < hash->nbuckets; i++)
+    for (tlist = hash_items (i, hash); tlist; tlist = tlist->next)
+      {
+	if (ansic_shouldquote (tlist->key))
+	  istr = ansic_quote (tlist->key, 0, (int *)0);
+	else if (sh_contains_shell_metas (tlist->key))
+	  istr = sh_double_quote (tlist->key);
+	else if (ALL_ELEMENT_SUB (tlist->key[0]) && tlist->key[1] == '\0')
+	  istr = sh_double_quote (tlist->key);	
+	else
+	  istr = tlist->key;	
+
+	vstr = tlist->data ? (ansic_shouldquote ((char *)tlist->data) ?
+				ansic_quote ((char *)tlist->data, 0, (int *)0) :
+				sh_double_quote ((char *)tlist->data))
+			   : (char *)0;
+
+	elen = STRLEN (istr) + 4 + STRLEN (vstr);
+	RESIZE_MALLOCED_BUFFER (ret, rlen, (elen+1), rsize, rsize);
+
+	strcpy (ret+rlen, istr);
+	rlen += STRLEN (istr);
+	ret[rlen++] = ' ';
+	if (vstr)
+	  {
+	    strcpy (ret + rlen, vstr);
+	    rlen += STRLEN (vstr);
+	  }
+	else
+	  {
+	    strcpy (ret + rlen, "\"\"");
+	    rlen += 2;
+	  }
+	ret[rlen++] = ' ';
+
+	if (istr != tlist->key)
+	  FREE (istr);
+
+	FREE (vstr);
+    }
+
+  RESIZE_MALLOCED_BUFFER (ret, rlen, 1, rsize, 8);
+  ret[rlen] = '\0';
+
+  if (quoted)
+    {
+      vstr = sh_single_quote (ret);
+      free (ret);
+      ret = vstr;
+    }
+
+  return ret;
+}
+
+char *
+assoc_to_assign (hash, quoted)
+     HASH_TABLE *hash;
+     int quoted;
+{
+  char *ret;
+  char *istr, *vstr;
+  int i, rsize, rlen, elen;
+  BUCKET_CONTENTS *tlist;
+
+  if (hash == 0 || assoc_empty (hash))
+    return (char *)0;
+
+  ret = xmalloc (rsize = 128);
+  ret[0] = '(';
+  rlen = 1;
+
+  for (i = 0; i < hash->nbuckets; i++)
+    for (tlist = hash_items (i, hash); tlist; tlist = tlist->next)
+      {
+	if (ansic_shouldquote (tlist->key))
+	  istr = ansic_quote (tlist->key, 0, (int *)0);
+	else if (sh_contains_shell_metas (tlist->key))
+	  istr = sh_double_quote (tlist->key);
+	else if (ALL_ELEMENT_SUB (tlist->key[0]) && tlist->key[1] == '\0')
+	  istr = sh_double_quote (tlist->key);	
+	else
+	  istr = tlist->key;	
+
+	vstr = tlist->data ? (ansic_shouldquote ((char *)tlist->data) ?
+				ansic_quote ((char *)tlist->data, 0, (int *)0) :
+				sh_double_quote ((char *)tlist->data))
+			   : (char *)0;
+
+	elen = STRLEN (istr) + 8 + STRLEN (vstr);
+	RESIZE_MALLOCED_BUFFER (ret, rlen, (elen+1), rsize, rsize);
+
+	ret[rlen++] = '[';
+	strcpy (ret+rlen, istr);
+	rlen += STRLEN (istr);
+	ret[rlen++] = ']';
+	ret[rlen++] = '=';
+	if (vstr)
+	  {
+	    strcpy (ret + rlen, vstr);
+	    rlen += STRLEN (vstr);
+	  }
+	ret[rlen++] = ' ';
+
+	if (istr != tlist->key)
+	  FREE (istr);
+
+	FREE (vstr);
+    }
+
+  RESIZE_MALLOCED_BUFFER (ret, rlen, 1, rsize, 8);
+  ret[rlen++] = ')';
+  ret[rlen] = '\0';
+
+  if (quoted)
+    {
+      vstr = sh_single_quote (ret);
+      free (ret);
+      ret = vstr;
+    }
+
+  return ret;
+}
+
+static WORD_LIST *
+assoc_to_word_list_internal (h, t)
+     HASH_TABLE *h;
+     int t;
+{
+  WORD_LIST *list;
+  int i;
+  BUCKET_CONTENTS *tlist;
+  char *w;
+
+  if (h == 0 || assoc_empty (h))
+    return((WORD_LIST *)NULL);
+  list = (WORD_LIST *)NULL;
+  
+  for (i = 0; i < h->nbuckets; i++)
+    for (tlist = hash_items (i, h); tlist; tlist = tlist->next)
+      {
+	w = (t == 0) ? (char *)tlist->data : (char *)tlist->key;
+	list = make_word_list (make_bare_word(w), list);
+      }
+  return (REVERSE_LIST(list, WORD_LIST *));
+}
+
+WORD_LIST *
+assoc_to_word_list (h)
+     HASH_TABLE *h;
+{
+  return (assoc_to_word_list_internal (h, 0));
+}
+
+WORD_LIST *
+assoc_keys_to_word_list (h)
+     HASH_TABLE *h;
+{
+  return (assoc_to_word_list_internal (h, 1));
+}
+
+char *
+assoc_to_string (h, sep, quoted)
+     HASH_TABLE *h;
+     char *sep;
+     int quoted;
+{
+  BUCKET_CONTENTS *tlist;
+  int i;
+  char *result, *t, *w;
+  WORD_LIST *list, *l;
+
+  if (h == 0)
+    return ((char *)NULL);
+  if (assoc_empty (h))
+    return (savestring (""));
+
+  result = NULL;
+  l = list = NULL;
+  /* This might be better implemented directly, but it's simple to implement
+     by converting to a word list first, possibly quoting the data, then
+     using list_string */
+  for (i = 0; i < h->nbuckets; i++)
+    for (tlist = hash_items (i, h); tlist; tlist = tlist->next)
+      {
+	w = (char *)tlist->data;
+	if (w == 0)
+	  continue;
+	t = quoted ? quote_string (w) : savestring (w);
+	list = make_word_list (make_bare_word(t), list);
+	FREE (t);
+      }
+
+  l = REVERSE_LIST(list, WORD_LIST *);
+
+  result = l ? string_list_internal (l, sep) : savestring ("");
+  dispose_words (l);  
+
+  return result;
+}
+
+#endif /* ARRAY_VARS */
diff --git a/assoc.h b/assoc.h
new file mode 100644
index 0000000..78ec073
--- /dev/null
+++ b/assoc.h
@@ -0,0 +1,65 @@
+/* assoc.h -- definitions for the interface exported by assoc.c that allows
+   the rest of the shell to manipulate associative array variables. */
+
+/* Copyright (C) 2008,2009-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _ASSOC_H_
+#define _ASSOC_H_
+
+#include "stdc.h"
+#include "hashlib.h"
+
+#define ASSOC_HASH_BUCKETS	1024
+
+#define assoc_empty(h)		((h)->nentries == 0)
+#define assoc_num_elements(h)	((h)->nentries)
+
+#define assoc_create(n)		(hash_create((n)))
+
+#define assoc_copy(h)		(hash_copy((h), 0))
+
+#define assoc_walk(h, f)	(hash_walk((h), (f))
+
+extern void assoc_dispose PARAMS((HASH_TABLE *));
+extern void assoc_flush PARAMS((HASH_TABLE *));
+
+extern int assoc_insert PARAMS((HASH_TABLE *, char *, char *));
+extern PTR_T assoc_replace PARAMS((HASH_TABLE *, char *, char *));
+extern void assoc_remove PARAMS((HASH_TABLE *, char *));
+
+extern char *assoc_reference PARAMS((HASH_TABLE *, char *));
+
+extern char *assoc_subrange PARAMS((HASH_TABLE *, arrayind_t, arrayind_t, int, int, int));
+extern char *assoc_patsub PARAMS((HASH_TABLE *, char *, char *, int));
+extern char *assoc_modcase PARAMS((HASH_TABLE *, char *, int, int));
+
+extern HASH_TABLE *assoc_quote PARAMS((HASH_TABLE *));
+extern HASH_TABLE *assoc_quote_escapes PARAMS((HASH_TABLE *));
+extern HASH_TABLE *assoc_dequote PARAMS((HASH_TABLE *));
+extern HASH_TABLE *assoc_dequote_escapes PARAMS((HASH_TABLE *));
+extern HASH_TABLE *assoc_remove_quoted_nulls PARAMS((HASH_TABLE *));
+
+extern char *assoc_to_kvpair PARAMS((HASH_TABLE *, int));
+extern char *assoc_to_assign PARAMS((HASH_TABLE *, int));
+
+extern WORD_LIST *assoc_to_word_list PARAMS((HASH_TABLE *));
+extern WORD_LIST *assoc_keys_to_word_list PARAMS((HASH_TABLE *));
+
+extern char *assoc_to_string PARAMS((HASH_TABLE *, char *, int));
+#endif /* _ASSOC_H_ */
diff --git a/bashansi.h b/bashansi.h
new file mode 100644
index 0000000..2c33937
--- /dev/null
+++ b/bashansi.h
@@ -0,0 +1,41 @@
+/* bashansi.h -- Typically included information required by picky compilers. */
+
+/* Copyright (C) 1993-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_BASHANSI_H_)
+#define _BASHANSI_H_
+
+#if defined (HAVE_STRING_H)
+#  if ! defined (STDC_HEADERS) && defined (HAVE_MEMORY_H)
+#    include <memory.h>
+#  endif
+#  include <string.h>
+#endif /* !HAVE_STRING_H */
+
+#if defined (HAVE_STRINGS_H)
+#  include <strings.h>
+#endif /* !HAVE_STRINGS_H */
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* !HAVE_STDLIB_H */
+
+#endif /* !_BASHANSI_H_ */
diff --git a/bashhist.c b/bashhist.c
new file mode 100644
index 0000000..2a05a53
--- /dev/null
+++ b/bashhist.c
@@ -0,0 +1,1074 @@
+/* bashhist.c -- bash interface to the GNU history library. */
+
+/* Copyright (C) 1993-2019 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#if defined (HISTORY)
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+ #    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include "bashtypes.h"
+#include <stdio.h>
+#include <errno.h>
+#include "bashansi.h"
+#include "posixstat.h"
+#include "filecntl.h"
+
+#include "bashintl.h"
+
+#if defined (SYSLOG_HISTORY)
+#  include <syslog.h>
+#endif
+
+#include "shell.h"
+#include "flags.h"
+#include "parser.h"
+#include "input.h"
+#include "parser.h"	/* for the struct dstack stuff. */
+#include "pathexp.h"	/* for the struct ignorevar stuff */
+#include "bashhist.h"	/* matching prototypes and declarations */
+#include "builtins/common.h"
+
+#include <readline/history.h>
+#include <glob/glob.h>
+#include <glob/strmatch.h>
+
+#if defined (READLINE)
+#  include "bashline.h"
+extern int rl_done, rl_dispatching;	/* should really include readline.h */
+#endif
+
+#ifndef HISTSIZE_DEFAULT
+#  define HISTSIZE_DEFAULT "500"
+#endif
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+static int histignore_item_func PARAMS((struct ign *));
+static int check_history_control PARAMS((char *));
+static void hc_erasedups PARAMS((char *));
+static void really_add_history PARAMS((char *));
+
+static struct ignorevar histignore =
+{
+  "HISTIGNORE",
+  (struct ign *)0,
+  0,
+  (char *)0,
+  (sh_iv_item_func_t *)histignore_item_func,
+};
+
+#define HIGN_EXPAND 0x01
+
+/* Declarations of bash history variables. */
+/* Non-zero means to remember lines typed to the shell on the history
+   list.  This is different than the user-controlled behaviour; this
+   becomes zero when we read lines from a file, for example. */
+int remember_on_history = 0;
+int enable_history_list = -1;	/* value for `set -o history' */
+
+/* The number of lines that Bash has added to this history session.  The
+   difference between the number of the top element in the history list
+   (offset from history_base) and the number of lines in the history file.
+   Appending this session's history to the history file resets this to 0. */
+int history_lines_this_session;
+
+/* The number of lines that Bash has read from the history file. */
+int history_lines_in_file;
+
+#if defined (BANG_HISTORY)
+/* Non-zero means do no history expansion on this line, regardless
+   of what history_expansion says. */
+int history_expansion_inhibited;
+/* If non-zero, double quotes can quote the history expansion character. */
+int double_quotes_inhibit_history_expansion = 0;
+#endif
+
+/* With the old default, every line was saved in the history individually.
+   I.e., if the user enters:
+	bash$ for i in a b c
+	> do
+	> echo $i
+	> done
+   Each line will be individually saved in the history.
+	bash$ history
+	10  for i in a b c
+	11  do
+	12  echo $i
+	13  done
+	14  history
+   If the variable command_oriented_history is set, multiple lines
+   which form one command will be saved as one history entry.
+	bash$ for i in a b c
+	> do
+	> echo $i
+	> done
+	bash$ history
+	10  for i in a b c
+    do
+    echo $i
+    done
+	11  history
+   The user can then recall the whole command all at once instead
+   of just being able to recall one line at a time.
+
+   This is now enabled by default.
+   */
+int command_oriented_history = 1;
+
+/* Set to 1 if the first line of a possibly-multi-line command was saved
+   in the history list.  Managed by maybe_add_history(), but global so
+   the history-manipluating builtins can see it. */
+int current_command_first_line_saved = 0;
+
+/* Set to the number of the most recent line of a possibly-multi-line command
+   that contains a shell comment.  Used by bash_add_history() to determine
+   whether to add a newline or a semicolon. */
+int current_command_line_comment = 0;
+
+/* Non-zero means to store newlines in the history list when using
+   command_oriented_history rather than trying to use semicolons. */
+int literal_history;
+
+/* Non-zero means to append the history to the history file at shell
+   exit, even if the history has been stifled. */
+int force_append_history;
+
+/* A nit for picking at history saving.  Flags have the following values:
+
+   Value == 0 means save all lines parsed by the shell on the history.
+   Value & HC_IGNSPACE means save all lines that do not start with a space.
+   Value & HC_IGNDUPS means save all lines that do not match the last
+   line saved.
+   Value & HC_ERASEDUPS means to remove all other matching lines from the
+   history list before saving the latest line. */
+int history_control;
+
+/* Set to 1 if the last command was added to the history list successfully
+   as a separate history entry; set to 0 if the line was ignored or added
+   to a previous entry as part of command-oriented-history processing. */
+int hist_last_line_added;
+
+/* Set to 1 if builtins/history.def:push_history added the last history
+   entry. */
+int hist_last_line_pushed;
+
+#if defined (READLINE)
+/* If non-zero, and readline is being used, the user is offered the
+   chance to re-edit a failed history expansion. */
+int history_reediting;
+
+/* If non-zero, and readline is being used, don't directly execute a
+   line with history substitution.  Reload it into the editing buffer
+   instead and let the user further edit and confirm with a newline. */
+int hist_verify;
+
+#endif /* READLINE */
+
+/* Non-zero means to not save function definitions in the history list. */
+int dont_save_function_defs;
+
+#if defined (BANG_HISTORY)
+static int bash_history_inhibit_expansion PARAMS((char *, int));
+#endif
+#if defined (READLINE)
+static void re_edit PARAMS((char *));
+#endif
+static int history_expansion_p PARAMS((char *));
+static int shell_comment PARAMS((char *));
+static int should_expand PARAMS((char *));
+static HIST_ENTRY *last_history_entry PARAMS((void));
+static char *expand_histignore_pattern PARAMS((char *));
+static int history_should_ignore PARAMS((char *));
+
+#if defined (BANG_HISTORY)
+/* Is the history expansion starting at string[i] one that should not
+   be expanded? */
+static int
+bash_history_inhibit_expansion (string, i)
+     char *string;
+     int i;
+{
+  int t, si;
+  char hx[2];
+
+  hx[0] = history_expansion_char;
+  hx[1] = '\0';
+
+  /* The shell uses ! as a pattern negation character in globbing [...]
+     expressions, so let those pass without expansion. */
+  if (i > 0 && (string[i - 1] == '[') && member (']', string + i + 1))
+    return (1);
+  /* The shell uses ! as the indirect expansion character, so let those
+     expansions pass as well. */
+  else if (i > 1 && string[i - 1] == '{' && string[i - 2] == '$' &&
+	     member ('}', string + i + 1))
+    return (1);
+  /* The shell uses $! as a defined parameter expansion. */
+  else if (i > 1 && string[i - 1] == '$' && string[i] == '!')
+    return (1);
+#if defined (EXTENDED_GLOB)
+  else if (extended_glob && i > 1 && string[i+1] == '(' && member (')', string + i + 2))
+    return (1);
+#endif
+
+  si = 0;
+  /* If we're supposed to be in single-quoted string, skip over the
+     single-quoted part and then look at what's left. */
+  if (history_quoting_state == '\'')
+    {
+      si = skip_to_delim (string, 0, "'", SD_NOJMP|SD_HISTEXP);
+      if (string[si] == 0 || si >= i)
+	return (1);
+      si++;
+    }
+
+  /* Make sure the history expansion should not be skipped by quoting or
+     command/process substitution. */
+  if ((t = skip_to_histexp (string, si, hx, SD_NOJMP|SD_HISTEXP)) > 0)
+    {
+      /* Skip instances of history expansion appearing on the line before
+	 this one. */
+      while (t < i)
+	{
+	  t = skip_to_histexp (string, t+1, hx, SD_NOJMP|SD_HISTEXP);
+	  if (t <= 0)
+	    return 0;
+	}
+      return (t > i);
+    }
+  else
+    return (0);
+}
+#endif
+
+void
+bash_initialize_history ()
+{
+  history_quotes_inhibit_expansion = 1;
+  history_search_delimiter_chars = ";&()|<>";
+#if defined (BANG_HISTORY)
+  history_inhibit_expansion_function = bash_history_inhibit_expansion;
+  sv_histchars ("histchars");
+#endif
+}
+
+void
+bash_history_reinit (interact)
+     int interact;
+{
+#if defined (BANG_HISTORY)
+  history_expansion = (interact == 0) ? histexp_flag : HISTEXPAND_DEFAULT;
+  history_expansion_inhibited = (interact == 0) ? 1 - histexp_flag : 0;	/* changed in bash_history_enable() */
+  history_inhibit_expansion_function = bash_history_inhibit_expansion;
+#endif
+  remember_on_history = enable_history_list;
+}
+
+void
+bash_history_disable ()
+{
+  remember_on_history = 0;
+#if defined (BANG_HISTORY)
+  history_expansion_inhibited = 1;
+#endif
+}
+
+void
+bash_history_enable ()
+{
+  remember_on_history = enable_history_list = 1;
+#if defined (BANG_HISTORY)
+  history_expansion_inhibited = 0;
+  history_inhibit_expansion_function = bash_history_inhibit_expansion;
+#endif
+  sv_history_control ("HISTCONTROL");
+  sv_histignore ("HISTIGNORE");
+}
+
+/* Load the history list from the history file. */
+void
+load_history ()
+{
+  char *hf;
+
+  /* Truncate history file for interactive shells which desire it.
+     Note that the history file is automatically truncated to the
+     size of HISTSIZE if the user does not explicitly set the size
+     differently. */
+  set_if_not ("HISTSIZE", HISTSIZE_DEFAULT);
+  sv_histsize ("HISTSIZE");
+
+  set_if_not ("HISTFILESIZE", get_string_value ("HISTSIZE"));
+  sv_histsize ("HISTFILESIZE");
+
+  /* Read the history in HISTFILE into the history list. */
+  hf = get_string_value ("HISTFILE");
+
+  if (hf && *hf && file_exists (hf))
+    {
+      read_history (hf);
+      /* We have read all of the lines from the history file, even if we
+	 read more lines than $HISTSIZE.  Remember the total number of lines
+	 we read so we don't count the last N lines as new over and over
+	 again. */
+      history_lines_in_file = history_lines_read_from_file;
+      using_history ();
+      /* history_lines_in_file = where_history () + history_base - 1; */
+    }
+}
+
+void
+bash_clear_history ()
+{
+  clear_history ();
+  history_lines_this_session = 0;
+  /* XXX - reset history_lines_read_from_file? */
+}
+
+/* Delete and free the history list entry at offset I. */
+int
+bash_delete_histent (i)
+     int i;
+{
+  HIST_ENTRY *discard;
+
+  discard = remove_history (i);
+  if (discard)
+    {
+      free_history_entry (discard);
+      history_lines_this_session--;
+    }
+  return discard != 0;
+}
+
+int
+bash_delete_history_range (first, last)
+     int first, last;
+{
+  register int i;
+  HIST_ENTRY **discard_list;
+
+  discard_list = remove_history_range (first, last);
+  for (i = 0; discard_list && discard_list[i]; i++)
+    free_history_entry (discard_list[i]);
+  history_lines_this_session -= i;
+
+  return 1;
+}
+
+int
+bash_delete_last_history ()
+{
+  register int i;
+  HIST_ENTRY **hlist, *histent;
+  int r;
+
+  hlist = history_list ();
+  if (hlist == NULL)
+    return 0;
+
+  for (i = 0; hlist[i]; i++)
+    ;
+  i--;
+
+  /* History_get () takes a parameter that must be offset by history_base. */
+  histent = history_get (history_base + i);	/* Don't free this */
+  if (histent == NULL)
+    return 0;
+
+  r = bash_delete_histent (i);
+
+  if (where_history () > history_length)
+    history_set_pos (history_length);
+
+  return r;
+}
+
+#ifdef INCLUDE_UNUSED
+/* Write the existing history out to the history file. */
+void
+save_history ()
+{
+  char *hf;
+  int r;
+
+  hf = get_string_value ("HISTFILE");
+  if (hf && *hf && file_exists (hf))
+    {
+      /* Append only the lines that occurred this session to
+	 the history file. */
+      using_history ();
+
+      if (history_lines_this_session <= where_history () || force_append_history)
+	r = append_history (history_lines_this_session, hf);
+      else
+	r = write_history (hf);
+      sv_histsize ("HISTFILESIZE");
+    }
+}
+#endif
+
+int
+maybe_append_history (filename)
+     char *filename;
+{
+  int fd, result, histlen;
+  struct stat buf;
+
+  result = EXECUTION_SUCCESS;
+  if (history_lines_this_session > 0)
+    {
+      /* If the filename was supplied, then create it if necessary. */
+      if (stat (filename, &buf) == -1 && errno == ENOENT)
+	{
+	  fd = open (filename, O_WRONLY|O_CREAT, 0600);
+	  if (fd < 0)
+	    {
+	      builtin_error (_("%s: cannot create: %s"), filename, strerror (errno));
+	      return (EXECUTION_FAILURE);
+	    }
+	  close (fd);
+	}
+      /* cap the number of lines we write at the length of the history list */
+      histlen = where_history ();
+      if (histlen > 0 && history_lines_this_session > histlen)
+	history_lines_this_session = histlen;	/* reset below anyway */
+      result = append_history (history_lines_this_session, filename);
+      /* Pretend we already read these lines from the file because we just
+	 added them */
+      history_lines_in_file += history_lines_this_session;
+      history_lines_this_session = 0;
+    }
+  else
+    history_lines_this_session = 0;	/* reset if > where_history() */
+
+  return (result);
+}
+
+/* If this is an interactive shell, then append the lines executed
+   this session to the history file. */
+int
+maybe_save_shell_history ()
+{
+  int result;
+  char *hf;
+
+  result = 0;
+  if (history_lines_this_session > 0)
+    {
+      hf = get_string_value ("HISTFILE");
+
+      if (hf && *hf)
+	{
+	  /* If the file doesn't exist, then create it. */
+	  if (file_exists (hf) == 0)
+	    {
+	      int file;
+	      file = open (hf, O_CREAT | O_TRUNC | O_WRONLY, 0600);
+	      if (file != -1)
+		close (file);
+	    }
+
+	  /* Now actually append the lines if the history hasn't been
+	     stifled.  If the history has been stifled, rewrite the
+	     history file. */
+	  using_history ();
+	  if (history_lines_this_session <= where_history () || force_append_history)
+	    {
+	      result = append_history (history_lines_this_session, hf);
+	      history_lines_in_file += history_lines_this_session;
+	    }
+	  else
+	    {
+	      result = write_history (hf);
+	      history_lines_in_file = history_lines_written_to_file;
+	      /* history_lines_in_file = where_history () + history_base - 1; */
+	    }
+	  history_lines_this_session = 0;
+
+	  sv_histsize ("HISTFILESIZE");
+	}
+    }
+  return (result);
+}
+
+#if defined (READLINE)
+/* Tell readline () that we have some text for it to edit. */
+static void
+re_edit (text)
+     char *text;
+{
+  if (bash_input.type == st_stdin)
+    bash_re_edit (text);
+}
+#endif /* READLINE */
+
+/* Return 1 if this line needs history expansion. */
+static int
+history_expansion_p (line)
+     char *line;
+{
+  register char *s;
+
+  for (s = line; *s; s++)
+    if (*s == history_expansion_char || *s == history_subst_char)
+      return 1;
+  return 0;
+}
+
+/* Do pre-processing on LINE.  If PRINT_CHANGES is non-zero, then
+   print the results of expanding the line if there were any changes.
+   If there is an error, return NULL, otherwise the expanded line is
+   returned.  If ADDIT is non-zero the line is added to the history
+   list after history expansion.  ADDIT is just a suggestion;
+   REMEMBER_ON_HISTORY can veto, and does.
+   Right now this does history expansion. */
+char *
+pre_process_line (line, print_changes, addit)
+     char *line;
+     int print_changes, addit;
+{
+  char *history_value;
+  char *return_value;
+  int expanded;
+
+  return_value = line;
+  expanded = 0;
+
+#  if defined (BANG_HISTORY)
+  /* History expand the line.  If this results in no errors, then
+     add that line to the history if ADDIT is non-zero. */
+  if (!history_expansion_inhibited && history_expansion && history_expansion_p (line))
+    {
+      int old_len;
+
+      /* If we are expanding the second or later line of a multi-line
+	 command, decrease history_length so references to history expansions
+	 in these lines refer to the previous history entry and not the
+	 current command. */
+      old_len = history_length;
+      if (history_length > 0 && command_oriented_history && current_command_first_line_saved && current_command_line_count > 1)
+        history_length--;
+      expanded = history_expand (line, &history_value);
+      if (history_length >= 0 && command_oriented_history && current_command_first_line_saved && current_command_line_count > 1)
+        history_length = old_len;
+
+      if (expanded)
+	{
+	  if (print_changes)
+	    {
+	      if (expanded < 0)
+		internal_error ("%s", history_value);
+#if defined (READLINE)
+	      else if (hist_verify == 0 || expanded == 2)
+#else
+	      else
+#endif
+		fprintf (stderr, "%s\n", history_value);
+	    }
+
+	  /* If there was an error, return NULL. */
+	  if (expanded < 0 || expanded == 2)	/* 2 == print only */
+	    {
+#    if defined (READLINE)
+	      if (expanded == 2 && rl_dispatching == 0 && *history_value)
+#    else	      
+	      if (expanded == 2 && *history_value)
+#    endif /* !READLINE */
+		maybe_add_history (history_value);
+
+	      free (history_value);
+
+#    if defined (READLINE)
+	      /* New hack.  We can allow the user to edit the
+		 failed history expansion. */
+	      if (history_reediting && expanded < 0 && rl_done)
+		re_edit (line);
+#    endif /* READLINE */
+	      return ((char *)NULL);
+	    }
+
+#    if defined (READLINE)
+	  if (hist_verify && expanded == 1)
+	    {
+	      re_edit (history_value);
+	      free (history_value);
+	      return ((char *)NULL);
+	    }
+#    endif
+	}
+
+      /* Let other expansions know that return_value can be free'ed,
+	 and that a line has been added to the history list.  Note
+	 that we only add lines that have something in them. */
+      expanded = 1;
+      return_value = history_value;
+    }
+#  endif /* BANG_HISTORY */
+
+  if (addit && remember_on_history && *return_value)
+    maybe_add_history (return_value);
+
+#if 0
+  if (expanded == 0)
+    return_value = savestring (line);
+#endif
+
+  return (return_value);
+}
+
+/* Return 1 if the first non-whitespace character in LINE is a `#', indicating
+   that the line is a shell comment.  Return 2 if there is a comment after the
+   first non-whitespace character. Return 0 if the line does not contain a
+   comment. */
+static int
+shell_comment (line)
+     char *line;
+{
+  char *p;
+  int n;
+
+  if (line == 0)
+    return 0;
+  for (p = line; p && *p && whitespace (*p); p++)
+    ;
+  if (p && *p == '#')
+    return 1;
+  n = skip_to_delim (line, p - line, "#", SD_NOJMP|SD_GLOB|SD_EXTGLOB|SD_COMPLETE);
+  return (line[n] == '#') ? 2 : 0;
+}
+
+#ifdef INCLUDE_UNUSED
+/* Remove shell comments from LINE.  A `#' and anything after it is a comment.
+   This isn't really useful yet, since it doesn't handle quoting. */
+static char *
+filter_comments (line)
+     char *line;
+{
+  char *p;
+
+  for (p = line; p && *p && *p != '#'; p++)
+    ;
+  if (p && *p == '#')
+    *p = '\0';
+  return (line);
+}
+#endif
+
+/* Check LINE against what HISTCONTROL says to do.  Returns 1 if the line
+   should be saved; 0 if it should be discarded. */
+static int
+check_history_control (line)
+     char *line;
+{
+  HIST_ENTRY *temp;
+  int r;
+
+  if (history_control == 0)
+    return 1;
+
+  /* ignorespace or ignoreboth */
+  if ((history_control & HC_IGNSPACE) && *line == ' ')
+    return 0;
+
+  /* ignoredups or ignoreboth */
+  if (history_control & HC_IGNDUPS)
+    {
+      using_history ();
+      temp = previous_history ();
+
+      r = (temp == 0 || STREQ (temp->line, line) == 0);
+
+      using_history ();
+
+      if (r == 0)
+	return r;
+    }
+
+  return 1;
+}
+
+/* Remove all entries matching LINE from the history list.  Triggered when
+   HISTCONTROL includes `erasedups'. */
+static void
+hc_erasedups (line)
+     char *line;
+{
+  HIST_ENTRY *temp;
+  int r;
+
+  using_history ();
+  while (temp = previous_history ())
+    {
+      if (STREQ (temp->line, line))
+	{
+	  r = where_history ();
+	  temp = remove_history (r);
+	  if (temp)
+	    free_history_entry (temp);
+	}
+    }
+  using_history ();
+}
+
+/* Add LINE to the history list, handling possibly multi-line compound
+   commands.  We note whether or not we save the first line of each command
+   (which is usually the entire command and history entry), and don't add
+   the second and subsequent lines of a multi-line compound command if we
+   didn't save the first line.  We don't usually save shell comment lines in
+   compound commands in the history, because they could have the effect of
+   commenting out the rest of the command when the entire command is saved as
+   a single history entry (when COMMAND_ORIENTED_HISTORY is enabled).  If
+   LITERAL_HISTORY is set, we're saving lines in the history with embedded
+   newlines, so it's OK to save comment lines.  If we're collecting the body
+   of a here-document, we should act as if literal_history is enabled, because
+   we want to save the entire contents of the here-document as it was
+   entered.  We also make sure to save multiple-line quoted strings or other
+   constructs. */
+void
+maybe_add_history (line)
+     char *line;
+{
+  int is_comment;
+
+  hist_last_line_added = 0;
+  is_comment = (parser_state & PST_HEREDOC) ? 0 : shell_comment (line);
+
+  /* Don't use the value of history_control to affect the second
+     and subsequent lines of a multi-line command (old code did
+     this only when command_oriented_history is enabled). */
+  if (current_command_line_count > 1)
+    {
+      if (current_command_first_line_saved &&
+	  ((parser_state & PST_HEREDOC) || literal_history || dstack.delimiter_depth != 0 || is_comment != 1))
+	bash_add_history (line);
+      current_command_line_comment = is_comment ? current_command_line_count : -2;
+      return;
+    }
+
+  /* This is the first line of a (possible multi-line) command.  Note whether
+     or not we should save the first line and remember it. */
+  current_command_line_comment = is_comment ? current_command_line_count : -2;
+  current_command_first_line_saved = check_add_history (line, 0);
+}
+
+/* Just check LINE against HISTCONTROL and HISTIGNORE and add it to the
+   history if it's OK.  Used by `history -s' as well as maybe_add_history().
+   Returns 1 if the line was saved in the history, 0 otherwise. */
+int
+check_add_history (line, force)
+     char *line;
+     int force;
+{
+  if (check_history_control (line) && history_should_ignore (line) == 0)
+    {
+      /* We're committed to saving the line.  If the user has requested it,
+	 remove other matching lines from the history. */
+      if (history_control & HC_ERASEDUPS)
+	hc_erasedups (line);
+        
+      if (force)
+	{
+	  really_add_history (line);
+	  using_history ();
+	}
+      else
+	bash_add_history (line);
+      return 1;
+    }
+  return 0;
+}
+
+#if defined (SYSLOG_HISTORY)
+#define SYSLOG_MAXMSG	1024
+#define SYSLOG_MAXLEN	SYSLOG_MAXMSG
+#define SYSLOG_MAXHDR	256
+
+#ifndef OPENLOG_OPTS
+#define OPENLOG_OPTS 0
+#endif
+
+#if defined (SYSLOG_SHOPT)
+int syslog_history = SYSLOG_SHOPT;
+#else
+int syslog_history = 1;
+#endif
+
+void
+bash_syslog_history (line)
+     const char *line;
+{
+  char trunc[SYSLOG_MAXLEN], *msg;
+  char loghdr[SYSLOG_MAXHDR];
+  char seqbuf[32], *seqnum;
+  int hdrlen, msglen, seqlen, chunks, i;
+  static int first = 1;
+
+  if (first)
+    {
+      openlog (shell_name, OPENLOG_OPTS, SYSLOG_FACILITY);
+      first = 0;
+    }
+
+  hdrlen = snprintf (loghdr, sizeof(loghdr), "HISTORY: PID=%d UID=%d", getpid(), current_user.uid);
+  msglen = strlen (line);
+
+  if ((msglen + hdrlen + 1) < SYSLOG_MAXLEN)
+    syslog (SYSLOG_FACILITY|SYSLOG_LEVEL, "%s %s", loghdr, line);
+  else
+    {
+      chunks = ((msglen + hdrlen) / SYSLOG_MAXLEN) + 1;
+      for (msg = line, i = 0; i < chunks; i++)
+	{
+	  seqnum = inttostr (i + 1, seqbuf, sizeof (seqbuf));
+	  seqlen = STRLEN (seqnum);
+
+	  /* 7 == "(seq=) " */
+	  strncpy (trunc, msg, SYSLOG_MAXLEN - hdrlen - seqlen - 7 - 1);
+	  trunc[SYSLOG_MAXLEN - 1] = '\0';
+	  syslog (SYSLOG_FACILITY|SYSLOG_LEVEL, "%s (seq=%s) %s", loghdr, seqnum, trunc);
+	  msg += SYSLOG_MAXLEN - hdrlen - seqlen - 8;
+	}
+    }
+}
+#endif
+     	
+/* Add a line to the history list.
+   The variable COMMAND_ORIENTED_HISTORY controls the style of history
+   remembering;  when non-zero, and LINE is not the first line of a
+   complete parser construct, append LINE to the last history line instead
+   of adding it as a new line. */
+void
+bash_add_history (line)
+     char *line;
+{
+  int add_it, offset, curlen, is_comment;
+  HIST_ENTRY *current, *old;
+  char *chars_to_add, *new_line;
+
+  add_it = 1;
+  if (command_oriented_history && current_command_line_count > 1)
+    {
+      is_comment = (parser_state & PST_HEREDOC) ? 0 : shell_comment (line);
+
+      /* The second and subsequent lines of a here document have the trailing
+	 newline preserved.  We don't want to add extra newlines here, but we
+	 do want to add one after the first line (which is the command that
+	 contains the here-doc specifier).  parse.y:history_delimiting_chars()
+	 does the right thing to take care of this for us.  We don't want to
+	 add extra newlines if the user chooses to enable literal_history,
+	 so we have to duplicate some of what that function does here. */
+      /* If we're in a here document and past the first line,
+		(current_command_line_count > 2)
+	 don't add a newline here. This will also take care of the literal_history
+	 case if the other conditions are met. */
+      if ((parser_state & PST_HEREDOC) && current_command_line_count > 2 && line[strlen (line) - 1] == '\n')
+	chars_to_add = "";
+      else if (current_command_line_count == current_command_line_comment+1)
+	chars_to_add = "\n";
+      else if (literal_history)
+	chars_to_add = "\n";
+      else
+	chars_to_add = history_delimiting_chars (line);
+
+      using_history ();
+      current = previous_history ();
+
+      current_command_line_comment = is_comment ? current_command_line_count : -2;
+
+      if (current)
+	{
+	  /* If the previous line ended with an escaped newline (escaped
+	     with backslash, but otherwise unquoted), then remove the quoted
+	     newline, since that is what happens when the line is parsed. */
+	  curlen = strlen (current->line);
+
+	  if (dstack.delimiter_depth == 0 && current->line[curlen - 1] == '\\' &&
+	      current->line[curlen - 2] != '\\')
+	    {
+	      current->line[curlen - 1] = '\0';
+	      curlen--;
+	      chars_to_add = "";
+	    }
+
+	  /* If we're not in some kind of quoted construct, the current history
+	     entry ends with a newline, and we're going to add a semicolon,
+	     don't.  In some cases, it results in a syntax error (e.g., before
+	     a close brace), and it should not be needed. */
+	  if (dstack.delimiter_depth == 0 && current->line[curlen - 1] == '\n' && *chars_to_add == ';')
+	    chars_to_add++;
+
+	  new_line = (char *)xmalloc (1
+				      + curlen
+				      + strlen (line)
+				      + strlen (chars_to_add));
+	  sprintf (new_line, "%s%s%s", current->line, chars_to_add, line);
+	  offset = where_history ();
+	  old = replace_history_entry (offset, new_line, current->data);
+	  free (new_line);
+
+	  if (old)
+	    free_history_entry (old);
+
+	  add_it = 0;
+	}
+    }
+
+  if (add_it && history_is_stifled() && history_length == 0 && history_length == history_max_entries)
+    add_it = 0;
+
+  if (add_it)
+    really_add_history (line);
+
+#if defined (SYSLOG_HISTORY)
+  if (syslog_history)
+    bash_syslog_history (line);
+#endif
+
+  using_history ();
+}
+
+static void
+really_add_history (line)
+     char *line;
+{
+  hist_last_line_added = 1;
+  hist_last_line_pushed = 0;
+  add_history (line);
+  history_lines_this_session++;
+}
+
+int
+history_number ()
+{
+  using_history ();
+  return ((remember_on_history || enable_history_list) ? history_base + where_history () : 1);
+}
+
+static int
+should_expand (s)
+     char *s;
+{
+  char *p;
+
+  for (p = s; p && *p; p++)
+    {
+      if (*p == '\\')
+	p++;
+      else if (*p == '&')
+	return 1;
+    }
+  return 0;
+}
+
+static int
+histignore_item_func (ign)
+     struct ign *ign;
+{
+  if (should_expand (ign->val))
+    ign->flags |= HIGN_EXPAND;
+  return (0);
+}
+
+void
+setup_history_ignore (varname)
+     char *varname;
+{
+  setup_ignore_patterns (&histignore);
+}
+
+static HIST_ENTRY *
+last_history_entry ()
+{
+  HIST_ENTRY *he;
+
+  using_history ();
+  he = previous_history ();
+  using_history ();
+  return he;
+}
+
+char *
+last_history_line ()
+{
+  HIST_ENTRY *he;
+
+  he = last_history_entry ();
+  if (he == 0)
+    return ((char *)NULL);
+  return he->line;
+}
+
+static char *
+expand_histignore_pattern (pat)
+     char *pat;
+{
+  HIST_ENTRY *phe;
+  char *ret;
+
+  phe = last_history_entry ();
+
+  if (phe == (HIST_ENTRY *)0)
+    return (savestring (pat));
+
+  ret = strcreplace (pat, '&', phe->line, 1);
+
+  return ret;
+}
+
+/* Return 1 if we should not put LINE into the history according to the
+   patterns in HISTIGNORE. */
+static int
+history_should_ignore (line)
+     char *line;
+{
+  register int i, match;
+  char *npat;
+
+  if (histignore.num_ignores == 0)
+    return 0;
+
+  for (i = match = 0; i < histignore.num_ignores; i++)
+    {
+      if (histignore.ignores[i].flags & HIGN_EXPAND)
+	npat = expand_histignore_pattern (histignore.ignores[i].val);
+      else
+	npat = histignore.ignores[i].val;
+
+      match = strmatch (npat, line, FNMATCH_EXTFLAG) != FNM_NOMATCH;
+
+      if (histignore.ignores[i].flags & HIGN_EXPAND)
+	free (npat);
+
+      if (match)
+	break;
+    }
+
+  return match;
+}
+#endif /* HISTORY */
diff --git a/bashhist.h b/bashhist.h
new file mode 100644
index 0000000..615f5d2
--- /dev/null
+++ b/bashhist.h
@@ -0,0 +1,89 @@
+/* bashhist.h -- interface to the bash history functions in bashhist.c. */
+
+/* Copyright (C) 1993-2020 Free Software Foundation,  Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_BASHHIST_H_)
+#define _BASHHIST_H_
+
+#include "stdc.h"
+
+/* Flag values for history_control */
+#define HC_IGNSPACE	0x01
+#define HC_IGNDUPS	0x02
+#define HC_ERASEDUPS	0x04
+
+#define HC_IGNBOTH	(HC_IGNSPACE|HC_IGNDUPS)
+
+#if defined (STRICT_POSIX)
+#  undef HISTEXPAND_DEFAULT
+#  define HISTEXPAND_DEFAULT	0
+#else
+#  if !defined (HISTEXPAND_DEFAULT)
+#    define HISTEXPAND_DEFAULT	1
+#  endif /* !HISTEXPAND_DEFAULT */
+#endif
+
+extern int remember_on_history;
+extern int enable_history_list;		/* value for `set -o history' */
+extern int literal_history;		/* controlled by `shopt lithist' */
+extern int force_append_history;
+extern int history_lines_this_session;
+extern int history_lines_in_file;
+extern int history_expansion;
+extern int history_control;
+extern int command_oriented_history;
+extern int current_command_first_line_saved;
+extern int current_command_first_line_comment;
+extern int hist_last_line_added;
+extern int hist_last_line_pushed;
+
+extern int dont_save_function_defs;
+
+#  if defined (READLINE)
+extern int hist_verify;
+#  endif
+
+#  if defined (BANG_HISTORY)
+extern int history_expansion_inhibited;
+extern int double_quotes_inhibit_history_expansion;
+#  endif /* BANG_HISTORY */
+
+extern void bash_initialize_history PARAMS((void));
+extern void bash_history_reinit PARAMS((int));
+extern void bash_history_disable PARAMS((void));
+extern void bash_history_enable PARAMS((void));
+extern void bash_clear_history PARAMS((void));
+extern int bash_delete_histent PARAMS((int));
+extern int bash_delete_history_range PARAMS((int, int));
+extern int bash_delete_last_history PARAMS((void));
+extern void load_history PARAMS((void));
+extern void save_history PARAMS((void));
+extern int maybe_append_history PARAMS((char *));
+extern int maybe_save_shell_history PARAMS((void));
+extern char *pre_process_line PARAMS((char *, int, int));
+extern void maybe_add_history PARAMS((char *));
+extern void bash_add_history PARAMS((char *));
+extern int check_add_history PARAMS((char *, int));
+extern int history_number PARAMS((void));
+
+extern void setup_history_ignore PARAMS((char *));
+
+extern char *last_history_line PARAMS((void));
+
+#endif /* _BASHHIST_H_ */
diff --git a/bashintl.h b/bashintl.h
new file mode 100644
index 0000000..dd32683
--- /dev/null
+++ b/bashintl.h
@@ -0,0 +1,54 @@
+/* bashintl.h -- Internationalization functions and defines. */
+
+/* Copyright (C) 1996-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_BASHINTL_H_)
+#define _BASHINTL_H_
+
+#if defined (BUILDTOOL)
+#  undef ENABLE_NLS
+#  define ENABLE_NLS 0
+#endif
+
+/* Include this *after* config.h */
+#include "gettext.h"
+
+#if defined (HAVE_LOCALE_H)
+#  include <locale.h>
+#endif
+
+#define _(msgid)	gettext(msgid)
+#define N_(msgid)	msgid
+#define D_(d, msgid)	dgettext(d, msgid)
+
+#define P_(m1, m2, n)	ngettext(m1, m2, n)
+
+#if defined (HAVE_SETLOCALE) && !defined (LC_ALL)
+#  undef HAVE_SETLOCALE
+#endif
+
+#if !defined (HAVE_SETLOCALE)
+#  define setlocale(cat, loc)
+#endif
+
+#if !defined (HAVE_LOCALE_H) || !defined (HAVE_LOCALECONV)
+#  define locale_decpoint()	'.'
+#endif
+
+#endif /* !_BASHINTL_H_ */
diff --git a/bashjmp.h b/bashjmp.h
new file mode 100644
index 0000000..8ed1ac4
--- /dev/null
+++ b/bashjmp.h
@@ -0,0 +1,46 @@
+/* bashjmp.h -- wrapper for setjmp.h with necessary bash definitions. */
+
+/* Copyright (C) 1987-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _BASHJMP_H_
+#define _BASHJMP_H_
+
+#include "posixjmp.h"
+
+extern procenv_t	top_level;
+extern procenv_t	subshell_top_level;
+extern procenv_t	return_catch;	/* used by `return' builtin */
+extern procenv_t	wait_intr_buf;
+
+extern int no_longjmp_on_fatal_error;
+
+#define SHFUNC_RETURN()	sh_longjmp (return_catch, 1)
+
+#define COPY_PROCENV(old, save) \
+	xbcopy ((char *)old, (char *)save, sizeof (procenv_t));
+
+/* Values for the second argument to longjmp/siglongjmp. */
+#define NOT_JUMPED	0	/* Not returning from a longjmp. */
+#define FORCE_EOF	1	/* We want to stop parsing. */
+#define DISCARD		2	/* Discard current command. */
+#define EXITPROG	3	/* Unconditionally exit the program now. */
+#define ERREXIT		4	/* Exit due to error condition */	
+#define SIGEXIT		5	/* Exit due to fatal terminating signal */
+
+#endif /* _BASHJMP_H_ */
diff --git a/bashline.c b/bashline.c
new file mode 100644
index 0000000..c69c0c5
--- /dev/null
+++ b/bashline.c
@@ -0,0 +1,4652 @@
+/* bashline.c -- Bash's interface to the readline library. */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#if defined (READLINE)
+
+#include "bashtypes.h"
+#include "posixstat.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#if defined (HAVE_GRP_H)
+#  include <grp.h>
+#endif
+
+#if defined (HAVE_NETDB_H)
+#  include <netdb.h>
+#endif
+
+#include <signal.h>
+
+#include <stdio.h>
+#include "chartypes.h"
+#include "bashansi.h"
+#include "bashintl.h"
+
+#include "shell.h"
+#include "input.h"
+#include "parser.h"
+#include "builtins.h"
+#include "bashhist.h"
+#include "bashline.h"
+#include "execute_cmd.h"
+#include "findcmd.h"
+#include "pathexp.h"
+#include "shmbutil.h"
+#include "trap.h"
+#include "flags.h"
+
+#if defined (HAVE_MBSTR_H) && defined (HAVE_MBSCHR)
+#  include <mbstr.h>		/* mbschr */
+#endif
+
+#include "builtins/common.h"
+#include "builtins/builtext.h"		/* for read_builtin */
+
+#include <readline/rlconf.h>
+#include <readline/readline.h>
+#include <readline/history.h>
+#include <readline/rlmbutil.h>
+
+#include <glob/glob.h>
+
+#if defined (ALIAS)
+#  include "alias.h"
+#endif
+
+#if defined (PROGRAMMABLE_COMPLETION)
+#  include "pcomplete.h"
+#endif
+
+/* These should agree with the defines for emacs_mode and vi_mode in
+   rldefs.h, even though that's not a public readline header file. */
+#ifndef EMACS_EDITING_MODE
+#  define NO_EDITING_MODE	-1
+#  define EMACS_EDITING_MODE	 1
+#  define VI_EDITING_MODE	 0
+#endif
+
+/* Copied from rldefs.h, since that's not a public readline header file. */
+#ifndef FUNCTION_TO_KEYMAP
+
+#if defined (CRAY)
+#  define FUNCTION_TO_KEYMAP(map, key)	(Keymap)((int)map[key].function)
+#  define KEYMAP_TO_FUNCTION(data)	(rl_command_func_t *)((int)(data))
+#else
+#  define FUNCTION_TO_KEYMAP(map, key)	(Keymap)(map[key].function)
+#  define KEYMAP_TO_FUNCTION(data)	(rl_command_func_t *)(data)
+#endif
+
+#endif
+
+#define RL_BOOLEAN_VARIABLE_VALUE(s)	((s)[0] == 'o' && (s)[1] == 'n' && (s)[2] == '\0')
+
+#if defined (BRACE_COMPLETION)
+extern int bash_brace_completion PARAMS((int, int));
+#endif /* BRACE_COMPLETION */
+
+/* To avoid including curses.h/term.h/termcap.h and that whole mess. */
+#ifdef _MINIX
+extern int tputs PARAMS((const char *string, int nlines, void (*outx)(int)));
+#else
+extern int tputs PARAMS((const char *string, int nlines, int (*outx)(int)));
+#endif
+
+/* Forward declarations */
+
+/* Functions bound to keys in Readline for Bash users. */
+static int shell_expand_line PARAMS((int, int));
+static int display_shell_version PARAMS((int, int));
+
+static int bash_ignore_filenames PARAMS((char **));
+static int bash_ignore_everything PARAMS((char **));
+static int bash_progcomp_ignore_filenames PARAMS((char **));
+
+#if defined (BANG_HISTORY)
+static char *history_expand_line_internal PARAMS((char *));
+static int history_expand_line PARAMS((int, int));
+static int tcsh_magic_space PARAMS((int, int));
+#endif /* BANG_HISTORY */
+#ifdef ALIAS
+static int alias_expand_line PARAMS((int, int));
+#endif
+#if defined (BANG_HISTORY) && defined (ALIAS)
+static int history_and_alias_expand_line PARAMS((int, int));
+#endif
+
+static int bash_forward_shellword PARAMS((int, int));
+static int bash_backward_shellword PARAMS((int, int));
+static int bash_kill_shellword PARAMS((int, int));
+static int bash_backward_kill_shellword PARAMS((int, int));
+static int bash_transpose_shellwords PARAMS((int, int));
+
+/* Helper functions for Readline. */
+static char *restore_tilde PARAMS((char *, char *));
+static char *maybe_restore_tilde PARAMS((char *, char *));
+
+static char *bash_filename_rewrite_hook PARAMS((char *, int));
+
+static void bash_directory_expansion PARAMS((char **));
+static int bash_filename_stat_hook PARAMS((char **));
+static int bash_command_name_stat_hook PARAMS((char **));
+static int bash_directory_completion_hook PARAMS((char **));
+static int filename_completion_ignore PARAMS((char **));
+static int bash_push_line PARAMS((void));
+
+static int executable_completion PARAMS((const char *, int));
+
+static rl_icppfunc_t *save_directory_hook PARAMS((void));
+static void restore_directory_hook PARAMS((rl_icppfunc_t));
+
+static int directory_exists PARAMS((const char *, int));
+
+static void cleanup_expansion_error PARAMS((void));
+static void maybe_make_readline_line PARAMS((char *));
+static void set_up_new_line PARAMS((char *));
+
+static int check_redir PARAMS((int));
+static char **attempt_shell_completion PARAMS((const char *, int, int));
+static char *variable_completion_function PARAMS((const char *, int));
+static char *hostname_completion_function PARAMS((const char *, int));
+static char *command_subst_completion_function PARAMS((const char *, int));
+
+static void build_history_completion_array PARAMS((void));
+static char *history_completion_generator PARAMS((const char *, int));
+static int dynamic_complete_history PARAMS((int, int));
+static int bash_dabbrev_expand PARAMS((int, int));
+
+static void initialize_hostname_list PARAMS((void));
+static void add_host_name PARAMS((char *));
+static void snarf_hosts_from_file PARAMS((char *));
+static char **hostnames_matching PARAMS((char *));
+
+static void _ignore_completion_names PARAMS((char **, sh_ignore_func_t *));
+static int name_is_acceptable PARAMS((const char *));
+static int test_for_directory PARAMS((const char *));
+static int test_for_canon_directory PARAMS((const char *));
+static int return_zero PARAMS((const char *));
+
+static char *bash_dequote_filename PARAMS((char *, int));
+static char *quote_word_break_chars PARAMS((char *));
+static void set_filename_bstab PARAMS((const char *));
+static char *bash_quote_filename PARAMS((char *, int, char *));
+
+#ifdef _MINIX
+static void putx PARAMS((int));
+#else
+static int putx PARAMS((int));
+#endif
+static int readline_get_char_offset PARAMS((int));
+static void readline_set_char_offset PARAMS((int, int *));
+
+static Keymap get_cmd_xmap_from_edit_mode PARAMS((void));
+static Keymap get_cmd_xmap_from_keymap PARAMS((Keymap));
+
+static void init_unix_command_map PARAMS((void));
+static int isolate_sequence PARAMS((char *, int, int, int *));
+
+static int set_saved_history PARAMS((void));
+
+#if defined (ALIAS)
+static int posix_edit_macros PARAMS((int, int));
+#endif
+
+static int bash_event_hook PARAMS((void));
+
+#if defined (PROGRAMMABLE_COMPLETION)
+static int find_cmd_start PARAMS((int));
+static int find_cmd_end PARAMS((int));
+static char *find_cmd_name PARAMS((int, int *, int *));
+static char *prog_complete_return PARAMS((const char *, int));
+
+static char **prog_complete_matches;
+#endif
+
+extern int no_symbolic_links;
+extern STRING_INT_ALIST word_token_alist[];
+
+/* SPECIFIC_COMPLETION_FUNCTIONS specifies that we have individual
+   completion functions which indicate what type of completion should be
+   done (at or before point) that can be bound to key sequences with
+   the readline library. */
+#define SPECIFIC_COMPLETION_FUNCTIONS
+
+#if defined (SPECIFIC_COMPLETION_FUNCTIONS)
+static int bash_specific_completion PARAMS((int, rl_compentry_func_t *));
+
+static int bash_complete_filename_internal PARAMS((int));
+static int bash_complete_username_internal PARAMS((int));
+static int bash_complete_hostname_internal PARAMS((int));
+static int bash_complete_variable_internal PARAMS((int));
+static int bash_complete_command_internal PARAMS((int));
+
+static int bash_complete_filename PARAMS((int, int));
+static int bash_possible_filename_completions PARAMS((int, int));
+static int bash_complete_username PARAMS((int, int));
+static int bash_possible_username_completions PARAMS((int, int));
+static int bash_complete_hostname PARAMS((int, int));
+static int bash_possible_hostname_completions PARAMS((int, int));
+static int bash_complete_variable PARAMS((int, int));
+static int bash_possible_variable_completions PARAMS((int, int));
+static int bash_complete_command PARAMS((int, int));
+static int bash_possible_command_completions PARAMS((int, int));
+
+static int completion_glob_pattern PARAMS((char *));
+static char *glob_complete_word PARAMS((const char *, int));
+static int bash_glob_completion_internal PARAMS((int));
+static int bash_glob_complete_word PARAMS((int, int));
+static int bash_glob_expand_word PARAMS((int, int));
+static int bash_glob_list_expansions PARAMS((int, int));
+
+#endif /* SPECIFIC_COMPLETION_FUNCTIONS */
+
+static int edit_and_execute_command PARAMS((int, int, int, char *));
+#if defined (VI_MODE)
+static int vi_edit_and_execute_command PARAMS((int, int));
+static int bash_vi_complete PARAMS((int, int));
+#endif
+static int emacs_edit_and_execute_command PARAMS((int, int));
+
+/* Non-zero once initialize_readline () has been called. */
+int bash_readline_initialized = 0;
+
+/* If non-zero, we do hostname completion, breaking words at `@' and
+   trying to complete the stuff after the `@' from our own internal
+   host list. */
+int perform_hostname_completion = 1;
+
+/* If non-zero, we don't do command completion on an empty line. */
+int no_empty_command_completion;
+
+/* Set FORCE_FIGNORE if you want to honor FIGNORE even if it ignores the
+   only possible matches.  Set to 0 if you want to match filenames if they
+   are the only possible matches, even if FIGNORE says to. */
+int force_fignore = 1;
+
+/* Perform spelling correction on directory names during word completion */
+int dircomplete_spelling = 0;
+
+/* Expand directory names during word/filename completion. */
+#if DIRCOMPLETE_EXPAND_DEFAULT
+int dircomplete_expand = 1;
+int dircomplete_expand_relpath = 1;
+#else
+int dircomplete_expand = 0;
+int dircomplete_expand_relpath = 0;
+#endif
+
+/* When non-zero, perform `normal' shell quoting on completed filenames
+   even when the completed name contains a directory name with a shell
+   variable reference, so dollar signs in a filename get quoted appropriately.
+   Set to zero to remove dollar sign (and braces or parens as needed) from
+   the set of characters that will be quoted. */
+int complete_fullquote = 1;
+
+static char *bash_completer_word_break_characters = " \t\n\"'@><=;|&(:";
+static char *bash_nohostname_word_break_characters = " \t\n\"'><=;|&(:";
+/* )) */
+
+static const char *default_filename_quote_characters = " \t\n\\\"'@<>=;|&()#$`?*[!:{~";	/*}*/
+static char *custom_filename_quote_characters = 0;
+static char filename_bstab[256];
+
+static rl_hook_func_t *old_rl_startup_hook = (rl_hook_func_t *)NULL;
+
+static int dot_in_path = 0;
+
+/* Set to non-zero when dabbrev-expand is running */
+static int dabbrev_expand_active = 0;
+
+/* What kind of quoting is performed by bash_quote_filename:
+	COMPLETE_DQUOTE = double-quoting the filename
+	COMPLETE_SQUOTE = single_quoting the filename
+	COMPLETE_BSQUOTE = backslash-quoting special chars in the filename
+*/
+#define COMPLETE_DQUOTE  1
+#define COMPLETE_SQUOTE  2
+#define COMPLETE_BSQUOTE 3
+static int completion_quoting_style = COMPLETE_BSQUOTE;
+
+/* Flag values for the final argument to bash_default_completion */
+#define DEFCOMP_CMDPOS		1
+
+static rl_command_func_t *vi_tab_binding = rl_complete;
+
+/* Change the readline VI-mode keymaps into or out of Posix.2 compliance.
+   Called when the shell is put into or out of `posix' mode. */
+void
+posix_readline_initialize (on_or_off)
+     int on_or_off;
+{
+  static char kseq[2] = { CTRL ('I'), 0 };		/* TAB */
+
+  if (on_or_off)
+    rl_variable_bind ("comment-begin", "#");
+#if defined (VI_MODE)
+  if (on_or_off)
+    {
+      vi_tab_binding = rl_function_of_keyseq (kseq, vi_insertion_keymap, (int *)NULL);
+      rl_bind_key_in_map (CTRL ('I'), rl_insert, vi_insertion_keymap);
+    }
+  else
+    {
+      if (rl_function_of_keyseq (kseq, vi_insertion_keymap, (int *)NULL) == rl_insert)
+        rl_bind_key_in_map (CTRL ('I'), vi_tab_binding, vi_insertion_keymap);
+    }
+#endif
+}
+
+void
+reset_completer_word_break_chars ()
+{
+  rl_completer_word_break_characters = perform_hostname_completion ? savestring (bash_completer_word_break_characters) : savestring (bash_nohostname_word_break_characters);
+}
+
+/* When this function returns, rl_completer_word_break_characters points to
+   dynamically allocated memory. */
+int
+enable_hostname_completion (on_or_off)
+     int on_or_off;
+{
+  int old_value;
+  char *at, *nv, *nval;
+
+  old_value = perform_hostname_completion;
+
+  if (on_or_off)
+    {
+      perform_hostname_completion = 1;
+      rl_special_prefixes = "$@";
+    }
+  else
+    {
+      perform_hostname_completion = 0;
+      rl_special_prefixes = "$";
+    }
+
+  /* Now we need to figure out how to appropriately modify and assign
+     rl_completer_word_break_characters depending on whether we want
+     hostname completion on or off. */
+
+  /* If this is the first time this has been called
+     (bash_readline_initialized == 0), use the sames values as before, but
+     allocate new memory for rl_completer_word_break_characters. */
+
+  if (bash_readline_initialized == 0 &&
+      (rl_completer_word_break_characters == 0 || 
+       rl_completer_word_break_characters == rl_basic_word_break_characters))
+    {
+      if (on_or_off)
+	rl_completer_word_break_characters = savestring (bash_completer_word_break_characters);
+      else
+	rl_completer_word_break_characters = savestring (bash_nohostname_word_break_characters);
+    }
+  else
+    {
+      /* See if we have anything to do. */
+      at = strchr (rl_completer_word_break_characters, '@');
+      if ((at == 0 && on_or_off == 0) || (at != 0 && on_or_off != 0))
+        return old_value;
+
+      /* We have something to do.  Do it. */
+      nval = (char *)xmalloc (strlen (rl_completer_word_break_characters) + 1 + on_or_off);
+
+      if (on_or_off == 0)
+	{
+	  /* Turn it off -- just remove `@' from word break chars.  We want
+	     to remove all occurrences of `@' from the char list, so we loop
+	     rather than just copy the rest of the list over AT. */
+	  for (nv = nval, at = rl_completer_word_break_characters; *at; )
+	    if (*at != '@')
+	      *nv++ = *at++;
+	    else
+	      at++;
+	  *nv = '\0';
+	}
+      else
+	{
+	  nval[0] = '@';
+	  strcpy (nval + 1, rl_completer_word_break_characters);
+        }
+
+      free (rl_completer_word_break_characters);
+      rl_completer_word_break_characters = nval;
+    }
+
+  return (old_value);
+}
+
+/* Called once from parse.y if we are going to use readline. */
+void
+initialize_readline ()
+{
+  rl_command_func_t *func;
+  char kseq[2];
+
+  if (bash_readline_initialized)
+    return;
+
+  rl_terminal_name = get_string_value ("TERM");
+  rl_instream = stdin;
+  rl_outstream = stderr;
+
+  /* Allow conditional parsing of the ~/.inputrc file. */
+  rl_readline_name = "Bash";
+
+  /* Add bindable names before calling rl_initialize so they may be
+     referenced in the various inputrc files. */
+  rl_add_defun ("shell-expand-line", shell_expand_line, -1);
+#ifdef BANG_HISTORY
+  rl_add_defun ("history-expand-line", history_expand_line, -1);
+  rl_add_defun ("magic-space", tcsh_magic_space, -1);
+#endif
+
+  rl_add_defun ("shell-forward-word", bash_forward_shellword, -1);
+  rl_add_defun ("shell-backward-word", bash_backward_shellword, -1);
+  rl_add_defun ("shell-kill-word", bash_kill_shellword, -1);
+  rl_add_defun ("shell-backward-kill-word", bash_backward_kill_shellword, -1);
+  rl_add_defun ("shell-transpose-words", bash_transpose_shellwords, -1);
+
+#ifdef ALIAS
+  rl_add_defun ("alias-expand-line", alias_expand_line, -1);
+#  ifdef BANG_HISTORY
+  rl_add_defun ("history-and-alias-expand-line", history_and_alias_expand_line, -1);
+#  endif
+#endif
+
+  /* Backwards compatibility. */
+  rl_add_defun ("insert-last-argument", rl_yank_last_arg, -1);
+
+  rl_add_defun ("display-shell-version", display_shell_version, -1);
+  rl_add_defun ("edit-and-execute-command", emacs_edit_and_execute_command, -1);
+
+#if defined (BRACE_COMPLETION)
+  rl_add_defun ("complete-into-braces", bash_brace_completion, -1);
+#endif
+
+#if defined (SPECIFIC_COMPLETION_FUNCTIONS)
+  rl_add_defun ("complete-filename", bash_complete_filename, -1);
+  rl_add_defun ("possible-filename-completions", bash_possible_filename_completions, -1);
+  rl_add_defun ("complete-username", bash_complete_username, -1);
+  rl_add_defun ("possible-username-completions", bash_possible_username_completions, -1);
+  rl_add_defun ("complete-hostname", bash_complete_hostname, -1);
+  rl_add_defun ("possible-hostname-completions", bash_possible_hostname_completions, -1);
+  rl_add_defun ("complete-variable", bash_complete_variable, -1);
+  rl_add_defun ("possible-variable-completions", bash_possible_variable_completions, -1);
+  rl_add_defun ("complete-command", bash_complete_command, -1);
+  rl_add_defun ("possible-command-completions", bash_possible_command_completions, -1);
+  rl_add_defun ("glob-complete-word", bash_glob_complete_word, -1);
+  rl_add_defun ("glob-expand-word", bash_glob_expand_word, -1);
+  rl_add_defun ("glob-list-expansions", bash_glob_list_expansions, -1);
+#endif
+
+  rl_add_defun ("dynamic-complete-history", dynamic_complete_history, -1);
+  rl_add_defun ("dabbrev-expand", bash_dabbrev_expand, -1);
+
+  /* Bind defaults before binding our custom shell keybindings. */
+  if (RL_ISSTATE(RL_STATE_INITIALIZED) == 0)
+    rl_initialize ();
+
+  /* Bind up our special shell functions. */
+  rl_bind_key_if_unbound_in_map (CTRL('E'), shell_expand_line, emacs_meta_keymap);
+
+#ifdef BANG_HISTORY
+  rl_bind_key_if_unbound_in_map ('^', history_expand_line, emacs_meta_keymap);
+#endif
+
+  rl_bind_key_if_unbound_in_map (CTRL ('V'), display_shell_version, emacs_ctlx_keymap);
+
+  /* In Bash, the user can switch editing modes with "set -o [vi emacs]",
+     so it is not necessary to allow C-M-j for context switching.  Turn
+     off this occasionally confusing behaviour. */
+  kseq[0] = CTRL('J');
+  kseq[1] = '\0';
+  func = rl_function_of_keyseq (kseq, emacs_meta_keymap, (int *)NULL);
+  if (func == rl_vi_editing_mode)
+    rl_unbind_key_in_map (CTRL('J'), emacs_meta_keymap);
+  kseq[0] = CTRL('M');
+  func = rl_function_of_keyseq (kseq, emacs_meta_keymap, (int *)NULL);
+  if (func == rl_vi_editing_mode)
+    rl_unbind_key_in_map (CTRL('M'), emacs_meta_keymap);
+#if defined (VI_MODE)
+  kseq[0] = CTRL('E');
+  func = rl_function_of_keyseq (kseq, vi_movement_keymap, (int *)NULL);
+  if (func == rl_emacs_editing_mode)
+    rl_unbind_key_in_map (CTRL('E'), vi_movement_keymap);
+#endif
+
+#if defined (BRACE_COMPLETION)
+  rl_bind_key_if_unbound_in_map ('{', bash_brace_completion, emacs_meta_keymap); /*}*/
+#endif /* BRACE_COMPLETION */
+
+#if defined (SPECIFIC_COMPLETION_FUNCTIONS)
+  rl_bind_key_if_unbound_in_map ('/', bash_complete_filename, emacs_meta_keymap);
+  rl_bind_key_if_unbound_in_map ('/', bash_possible_filename_completions, emacs_ctlx_keymap);
+
+  /* Have to jump through hoops here because there is a default binding for
+     M-~ (rl_tilde_expand) */
+  kseq[0] = '~';
+  kseq[1] = '\0';
+  func = rl_function_of_keyseq (kseq, emacs_meta_keymap, (int *)NULL);
+  if (func == 0 || func == rl_tilde_expand)
+    rl_bind_keyseq_in_map (kseq, bash_complete_username, emacs_meta_keymap);
+
+  rl_bind_key_if_unbound_in_map ('~', bash_possible_username_completions, emacs_ctlx_keymap);
+
+  rl_bind_key_if_unbound_in_map ('@', bash_complete_hostname, emacs_meta_keymap);
+  rl_bind_key_if_unbound_in_map ('@', bash_possible_hostname_completions, emacs_ctlx_keymap);
+
+  rl_bind_key_if_unbound_in_map ('$', bash_complete_variable, emacs_meta_keymap);
+  rl_bind_key_if_unbound_in_map ('$', bash_possible_variable_completions, emacs_ctlx_keymap);
+
+  rl_bind_key_if_unbound_in_map ('!', bash_complete_command, emacs_meta_keymap);
+  rl_bind_key_if_unbound_in_map ('!', bash_possible_command_completions, emacs_ctlx_keymap);
+
+  rl_bind_key_if_unbound_in_map ('g', bash_glob_complete_word, emacs_meta_keymap);
+  rl_bind_key_if_unbound_in_map ('*', bash_glob_expand_word, emacs_ctlx_keymap);
+  rl_bind_key_if_unbound_in_map ('g', bash_glob_list_expansions, emacs_ctlx_keymap);
+
+#endif /* SPECIFIC_COMPLETION_FUNCTIONS */
+
+  kseq[0] = TAB;
+  kseq[1] = '\0';
+  func = rl_function_of_keyseq (kseq, emacs_meta_keymap, (int *)NULL);
+  if (func == 0 || func == rl_tab_insert)
+    rl_bind_key_in_map (TAB, dynamic_complete_history, emacs_meta_keymap);
+
+  /* Tell the completer that we want a crack first. */
+  rl_attempted_completion_function = attempt_shell_completion;
+
+  /* Tell the completer that we might want to follow symbolic links or
+     do other expansion on directory names. */
+  set_directory_hook ();
+
+  rl_filename_rewrite_hook = bash_filename_rewrite_hook;
+
+  rl_filename_stat_hook = bash_filename_stat_hook;
+
+  /* Tell the filename completer we want a chance to ignore some names. */
+  rl_ignore_some_completions_function = filename_completion_ignore;
+
+  /* Bind C-xC-e to invoke emacs and run result as commands. */
+  rl_bind_key_if_unbound_in_map (CTRL ('E'), emacs_edit_and_execute_command, emacs_ctlx_keymap);
+#if defined (VI_MODE)
+  rl_bind_key_if_unbound_in_map ('v', vi_edit_and_execute_command, vi_movement_keymap);
+#  if defined (ALIAS)
+  rl_bind_key_if_unbound_in_map ('@', posix_edit_macros, vi_movement_keymap);
+#  endif
+
+  rl_bind_key_in_map ('\\', bash_vi_complete, vi_movement_keymap);
+  rl_bind_key_in_map ('*', bash_vi_complete, vi_movement_keymap);
+  rl_bind_key_in_map ('=', bash_vi_complete, vi_movement_keymap);
+#endif
+
+  rl_completer_quote_characters = "'\"";
+
+  /* This sets rl_completer_word_break_characters and rl_special_prefixes
+     to the appropriate values, depending on whether or not hostname
+     completion is enabled. */
+  enable_hostname_completion (perform_hostname_completion);
+
+  /* characters that need to be quoted when appearing in filenames. */
+  rl_filename_quote_characters = default_filename_quote_characters;
+  set_filename_bstab (rl_filename_quote_characters);
+
+  rl_filename_quoting_function = bash_quote_filename;
+  rl_filename_dequoting_function = bash_dequote_filename;
+  rl_char_is_quoted_p = char_is_quoted;
+
+  /* Add some default bindings for the "shellwords" functions, roughly
+     parallelling the default word bindings in emacs mode. */
+  rl_bind_key_if_unbound_in_map (CTRL('B'), bash_backward_shellword, emacs_meta_keymap);
+  rl_bind_key_if_unbound_in_map (CTRL('D'), bash_kill_shellword, emacs_meta_keymap);
+  rl_bind_key_if_unbound_in_map (CTRL('F'), bash_forward_shellword, emacs_meta_keymap);
+  rl_bind_key_if_unbound_in_map (CTRL('T'), bash_transpose_shellwords, emacs_meta_keymap);
+
+#if 0
+  /* This is superfluous and makes it impossible to use tab completion in
+     vi mode even when explicitly binding it in ~/.inputrc.  sv_strict_posix()
+     should already have called posix_readline_initialize() when
+     posixly_correct was set. */
+  if (posixly_correct)
+    posix_readline_initialize (1);
+#endif
+
+  bash_readline_initialized = 1;
+}
+
+void
+bashline_reinitialize ()
+{
+  bash_readline_initialized = 0;
+}
+
+void
+bashline_set_event_hook ()
+{
+  rl_signal_event_hook = bash_event_hook;
+}
+
+void
+bashline_reset_event_hook ()
+{
+  rl_signal_event_hook = 0;
+}
+
+/* On Sun systems at least, rl_attempted_completion_function can end up
+   getting set to NULL, and rl_completion_entry_function set to do command
+   word completion if Bash is interrupted while trying to complete a command
+   word.  This just resets all the completion functions to the right thing.
+   It's called from throw_to_top_level(). */
+void
+bashline_reset ()
+{
+  tilde_initialize ();
+  rl_attempted_completion_function = attempt_shell_completion;
+  rl_completion_entry_function = NULL;
+  rl_ignore_some_completions_function = filename_completion_ignore;
+  rl_filename_quote_characters = default_filename_quote_characters;
+  set_filename_bstab (rl_filename_quote_characters);
+
+  set_directory_hook ();
+  rl_filename_stat_hook = bash_filename_stat_hook;
+
+  bashline_reset_event_hook ();
+
+  rl_sort_completion_matches = 1;
+}
+
+/* Contains the line to push into readline. */
+static char *push_to_readline = (char *)NULL;
+
+/* Push the contents of push_to_readline into the
+   readline buffer. */
+static int
+bash_push_line ()
+{
+  if (push_to_readline)
+    {
+      rl_insert_text (push_to_readline);
+      free (push_to_readline);
+      push_to_readline = (char *)NULL;
+      rl_startup_hook = old_rl_startup_hook;
+    }
+  return 0;
+}
+
+/* Call this to set the initial text for the next line to read
+   from readline. */
+int
+bash_re_edit (line)
+     char *line;
+{
+  FREE (push_to_readline);
+
+  push_to_readline = savestring (line);
+  old_rl_startup_hook = rl_startup_hook;
+  rl_startup_hook = bash_push_line;
+
+  return (0);
+}
+
+static int
+display_shell_version (count, c)
+     int count, c;
+{
+  rl_crlf ();
+  show_shell_version (0);
+  putc ('\r', rl_outstream);
+  fflush (rl_outstream);
+  rl_on_new_line ();
+  rl_redisplay ();
+  return 0;
+}
+
+/* **************************************************************** */
+/*								    */
+/*			     Readline Stuff			    */
+/*								    */
+/* **************************************************************** */
+
+/* If the user requests hostname completion, then simply build a list
+   of hosts, and complete from that forever more, or at least until
+   HOSTFILE is unset. */
+
+/* THIS SHOULD BE A STRINGLIST. */
+/* The kept list of hostnames. */
+static char **hostname_list = (char **)NULL;
+
+/* The physical size of the above list. */
+static int hostname_list_size;
+
+/* The number of hostnames in the above list. */
+static int hostname_list_length;
+
+/* Whether or not HOSTNAME_LIST has been initialized. */
+int hostname_list_initialized = 0;
+
+/* Initialize the hostname completion table. */
+static void
+initialize_hostname_list ()
+{
+  char *temp;
+
+  temp = get_string_value ("HOSTFILE");
+  if (temp == 0)
+    temp = get_string_value ("hostname_completion_file");
+  if (temp == 0)
+    temp = DEFAULT_HOSTS_FILE;
+
+  snarf_hosts_from_file (temp);
+
+  if (hostname_list)
+    hostname_list_initialized++;
+}
+
+/* Add NAME to the list of hosts. */
+static void
+add_host_name (name)
+     char *name;
+{
+  if (hostname_list_length + 2 > hostname_list_size)
+    {
+      hostname_list_size = (hostname_list_size + 32) - (hostname_list_size % 32);
+      hostname_list = strvec_resize (hostname_list, hostname_list_size);
+    }
+
+  hostname_list[hostname_list_length++] = savestring (name);
+  hostname_list[hostname_list_length] = (char *)NULL;
+}
+
+#define cr_whitespace(c) ((c) == '\r' || (c) == '\n' || whitespace(c))
+
+static void
+snarf_hosts_from_file (filename)
+     char *filename;
+{
+  FILE *file;
+  char *temp, buffer[256], name[256];
+  register int i, start;
+
+  file = fopen (filename, "r");
+  if (file == 0)
+    return;
+
+  while (temp = fgets (buffer, 255, file))
+    {
+      /* Skip to first character. */
+      for (i = 0; buffer[i] && cr_whitespace (buffer[i]); i++)
+	;
+
+      /* If comment or blank line, ignore. */
+      if (buffer[i] == '\0' || buffer[i] == '#')
+	continue;
+
+      /* If `preprocessor' directive, do the include. */
+      if (strncmp (buffer + i, "$include ", 9) == 0)
+	{
+	  char *incfile, *t;
+
+	  /* Find start of filename. */
+	  for (incfile = buffer + i + 9; *incfile && whitespace (*incfile); incfile++)
+	    ;
+
+	  /* Find end of filename. */
+	  for (t = incfile; *t && cr_whitespace (*t) == 0; t++)
+	    ;
+
+	  *t = '\0';
+
+	  snarf_hosts_from_file (incfile);
+	  continue;
+	}
+
+      /* Skip internet address if present. */
+      if (DIGIT (buffer[i]))
+	for (; buffer[i] && cr_whitespace (buffer[i]) == 0; i++);
+
+      /* Gobble up names.  Each name is separated with whitespace. */
+      while (buffer[i])
+	{
+	  for (; cr_whitespace (buffer[i]); i++)
+	    ;
+	  if (buffer[i] == '\0' || buffer[i] ==  '#')
+	    break;
+
+	  /* Isolate the current word. */
+	  for (start = i; buffer[i] && cr_whitespace (buffer[i]) == 0; i++)
+	    ;
+	  if (i == start)
+	    continue;
+	  strncpy (name, buffer + start, i - start);
+	  name[i - start] = '\0';
+	  add_host_name (name);
+	}
+    }
+  fclose (file);
+}
+
+/* Return the hostname list. */
+char **
+get_hostname_list ()
+{
+  if (hostname_list_initialized == 0)
+    initialize_hostname_list ();
+  return (hostname_list);
+}
+
+void
+clear_hostname_list ()
+{
+  register int i;
+
+  if (hostname_list_initialized == 0)
+    return;
+  for (i = 0; i < hostname_list_length; i++)
+    free (hostname_list[i]);
+  hostname_list_length = hostname_list_initialized = 0;
+}
+
+/* Return a NULL terminated list of hostnames which begin with TEXT.
+   Initialize the hostname list the first time if necessary.
+   The array is malloc ()'ed, but not the individual strings. */
+static char **
+hostnames_matching (text)
+     char *text;
+{
+  register int i, len, nmatch, rsize;
+  char **result;
+
+  if (hostname_list_initialized == 0)
+    initialize_hostname_list ();
+
+  if (hostname_list_initialized == 0)
+    return ((char **)NULL);
+
+  /* Special case.  If TEXT consists of nothing, then the whole list is
+     what is desired. */
+  if (*text == '\0')
+    {
+      result = strvec_create (1 + hostname_list_length);
+      for (i = 0; i < hostname_list_length; i++)
+	result[i] = hostname_list[i];
+      result[i] = (char *)NULL;
+      return (result);
+    }
+
+  /* Scan until found, or failure. */
+  len = strlen (text);
+  result = (char **)NULL;
+  for (i = nmatch = rsize = 0; i < hostname_list_length; i++)
+    {
+      if (STREQN (text, hostname_list[i], len) == 0)
+	continue;
+
+      /* OK, it matches.  Add it to the list. */
+      if (nmatch >= (rsize - 1))
+	{
+	  rsize = (rsize + 16) - (rsize % 16);
+	  result = strvec_resize (result, rsize);
+	}
+
+      result[nmatch++] = hostname_list[i];
+    }
+  if (nmatch)
+    result[nmatch] = (char *)NULL;
+  return (result);
+}
+
+/* This vi mode command causes VI_EDIT_COMMAND to be run on the current
+   command being entered (if no explicit argument is given), otherwise on
+   a command from the history file. */
+
+#define VI_EDIT_COMMAND		"fc -e \"${VISUAL:-${EDITOR:-vi}}\""
+#define EMACS_EDIT_COMMAND	"fc -e \"${VISUAL:-${EDITOR:-emacs}}\""
+#define POSIX_VI_EDIT_COMMAND	"fc -e vi"
+
+static int
+edit_and_execute_command (count, c, editing_mode, edit_command)
+     int count, c, editing_mode;
+     char *edit_command;
+{
+  char *command, *metaval;
+  int r, rrs, metaflag;
+  sh_parser_state_t ps;
+
+  rrs = rl_readline_state;
+  saved_command_line_count = current_command_line_count;
+
+  /* Accept the current line. */
+  rl_newline (1, c);
+
+  if (rl_explicit_arg)
+    {
+      command = (char *)xmalloc (strlen (edit_command) + 8);
+      sprintf (command, "%s %d", edit_command, count);
+    }
+  else
+    {
+      /* Take the command we were just editing, add it to the history file,
+	 then call fc to operate on it.  We have to add a dummy command to
+	 the end of the history because fc ignores the last command (assumes
+	 it's supposed to deal with the command before the `fc'). */
+      /* This breaks down when using command-oriented history and are not
+	 finished with the command, so we should not ignore the last command */
+      using_history ();
+      current_command_line_count++;	/* for rl_newline above */
+      bash_add_history (rl_line_buffer);
+      current_command_line_count = 0;	/* for dummy history entry */
+      bash_add_history ("");
+      history_lines_this_session++;
+      using_history ();
+      command = savestring (edit_command);
+    }
+
+  metaval = rl_variable_value ("input-meta");
+  metaflag = RL_BOOLEAN_VARIABLE_VALUE (metaval);
+  
+  if (rl_deprep_term_function)
+    (*rl_deprep_term_function) ();
+  rl_clear_signals ();
+  save_parser_state (&ps);
+  r = parse_and_execute (command, (editing_mode == VI_EDITING_MODE) ? "v" : "C-xC-e", SEVAL_NOHIST);
+  restore_parser_state (&ps);
+
+  /* if some kind of reset_parser was called, undo it. */
+  reset_readahead_token ();
+
+  if (rl_prep_term_function)
+    (*rl_prep_term_function) (metaflag);
+  rl_set_signals ();
+
+  current_command_line_count = saved_command_line_count;
+
+  /* Now erase the contents of the current line and undo the effects of the
+     rl_accept_line() above.  We don't even want to make the text we just
+     executed available for undoing. */
+  rl_line_buffer[0] = '\0';	/* XXX */
+  rl_point = rl_end = 0;
+  rl_done = 0;
+  rl_readline_state = rrs;
+
+#if defined (VI_MODE)
+  if (editing_mode == VI_EDITING_MODE)
+    rl_vi_insertion_mode (1, c);
+#endif
+
+  rl_forced_update_display ();
+
+  return r;
+}
+
+#if defined (VI_MODE)
+static int
+vi_edit_and_execute_command (count, c)
+     int count, c;
+{
+  if (posixly_correct)
+    return (edit_and_execute_command (count, c, VI_EDITING_MODE, POSIX_VI_EDIT_COMMAND));
+  else
+    return (edit_and_execute_command (count, c, VI_EDITING_MODE, VI_EDIT_COMMAND));
+}
+#endif /* VI_MODE */
+
+static int
+emacs_edit_and_execute_command (count, c)
+     int count, c;
+{
+  return (edit_and_execute_command (count, c, EMACS_EDITING_MODE, EMACS_EDIT_COMMAND));
+}
+
+#if defined (ALIAS)
+static int
+posix_edit_macros (count, key)
+     int count, key;
+{
+  int c;
+  char alias_name[3], *alias_value, *macro;
+
+  c = rl_read_key ();
+  alias_name[0] = '_';
+  alias_name[1] = c;
+  alias_name[2] = '\0';
+
+  alias_value = get_alias_value (alias_name);
+  if (alias_value && *alias_value)
+    {
+      macro = savestring (alias_value);
+      rl_push_macro_input (macro);
+    }
+  return 0;
+}
+#endif
+
+/* Bindable commands that move `shell-words': that is, sequences of
+   non-unquoted-metacharacters. */
+
+#define WORDDELIM(c)	(shellmeta(c) || shellblank(c))
+
+static int
+bash_forward_shellword (count, key)
+     int count, key;
+{
+  size_t slen;
+  int c, p;
+  DECLARE_MBSTATE;
+
+  if (count < 0)
+    return (bash_backward_shellword (-count, key));
+
+  /* The tricky part of this is deciding whether or not the first character
+     we're on is an unquoted metacharacter.  Not completely handled yet. */
+  /* XXX - need to test this stuff with backslash-escaped shell
+     metacharacters and unclosed single- and double-quoted strings. */
+
+  p = rl_point;
+  slen = rl_end;
+
+  while (count)
+    {
+      if (p == rl_end)
+	{
+	  rl_point = rl_end;
+	  return 0;
+	}
+
+      /* Are we in a quoted string?  If we are, move to the end of the quoted
+         string and continue the outer loop. We only want quoted strings, not
+         backslash-escaped characters, but char_is_quoted doesn't
+         differentiate. */
+      if (char_is_quoted (rl_line_buffer, p) && p > 0 && rl_line_buffer[p-1] != '\\')
+	{
+	  do
+	    ADVANCE_CHAR (rl_line_buffer, slen, p);
+	  while (p < rl_end && char_is_quoted (rl_line_buffer, p));
+	  count--;
+	  continue;
+	}
+
+      /* Rest of code assumes we are not in a quoted string. */
+      /* Move forward until we hit a non-metacharacter. */
+      while (p < rl_end && (c = rl_line_buffer[p]) && WORDDELIM (c))
+	{
+	  switch (c)
+	    {
+	    default:
+	      ADVANCE_CHAR (rl_line_buffer, slen, p);
+	      continue;		/* straight back to loop, don't increment p */
+	    case '\\':
+	      if (p < rl_end && rl_line_buffer[p])
+		ADVANCE_CHAR (rl_line_buffer, slen, p);
+	      break;
+	    case '\'':
+	      p = skip_to_delim (rl_line_buffer, ++p, "'", SD_NOJMP);
+	      break;
+	    case '"':
+	      p = skip_to_delim (rl_line_buffer, ++p, "\"", SD_NOJMP);
+	      break;
+	    }
+
+	  if (p < rl_end)
+	    p++;
+	}
+
+      if (rl_line_buffer[p] == 0 || p == rl_end)
+        {
+	  rl_point = rl_end;
+	  rl_ding ();
+	  return 0;
+        }
+	
+      /* Now move forward until we hit a non-quoted metacharacter or EOL */
+      while (p < rl_end && (c = rl_line_buffer[p]) && WORDDELIM (c) == 0)
+	{
+	  switch (c)
+	    {
+	    default:
+	      ADVANCE_CHAR (rl_line_buffer, slen, p);
+	      continue;		/* straight back to loop, don't increment p */
+	    case '\\':
+	      if (p < rl_end && rl_line_buffer[p])
+		ADVANCE_CHAR (rl_line_buffer, slen, p);
+	      break;
+	    case '\'':
+	      p = skip_to_delim (rl_line_buffer, ++p, "'", SD_NOJMP);
+	      break;
+	    case '"':
+	      p = skip_to_delim (rl_line_buffer, ++p, "\"", SD_NOJMP);
+	      break;
+	    }
+
+	  if (p < rl_end)
+	    p++;
+	}
+
+      if (p == rl_end || rl_line_buffer[p] == 0)
+	{
+	  rl_point = rl_end;
+	  return (0);
+	}
+
+      count--;      
+    }
+
+  rl_point = p;
+  return (0);
+}
+
+static int
+bash_backward_shellword (count, key)
+     int count, key;
+{
+  size_t slen;
+  int c, p, prev_p;
+  DECLARE_MBSTATE;
+
+  if (count < 0)
+    return (bash_forward_shellword (-count, key));
+
+  p = rl_point;
+  slen = rl_end;
+
+  while (count)
+    {
+      if (p == 0)
+	{
+	  rl_point = 0;
+	  return 0;
+	}
+
+      /* Move backward until we hit a non-metacharacter. We want to deal
+	 with the characters before point, so we move off a word if we're
+	 at its first character. */
+      BACKUP_CHAR (rl_line_buffer, slen, p);
+      while (p > 0)
+	{
+	  c = rl_line_buffer[p];
+	  if (WORDDELIM (c) == 0 || char_is_quoted (rl_line_buffer, p))
+	    break;
+	  BACKUP_CHAR (rl_line_buffer, slen, p);
+	}
+
+      if (p == 0)
+	{
+	  rl_point = 0;
+	  return 0;
+	}
+
+      /* Now move backward until we hit a metacharacter or BOL. Leave point
+	 at the start of the shellword or at BOL. */
+      prev_p = p;
+      while (p > 0)
+	{
+	  c = rl_line_buffer[p];
+	  if (WORDDELIM (c) && char_is_quoted (rl_line_buffer, p) == 0)
+	    {
+	      p = prev_p;
+	      break;
+	    }
+	  prev_p = p;
+	  BACKUP_CHAR (rl_line_buffer, slen, p);
+	}
+
+      count--;
+    }
+
+  rl_point = p;
+  return 0;
+}
+
+static int
+bash_kill_shellword (count, key)
+     int count, key;
+{
+  int p;
+
+  if (count < 0)
+    return (bash_backward_kill_shellword (-count, key));
+
+  p = rl_point;
+  bash_forward_shellword (count, key);
+
+  if (rl_point != p)
+    rl_kill_text (p, rl_point);
+
+  rl_point = p;
+  if (rl_editing_mode == EMACS_EDITING_MODE)	/* 1 == emacs_mode */
+    rl_mark = rl_point;
+
+  return 0;
+}
+
+static int
+bash_backward_kill_shellword (count, key)
+     int count, key;
+{
+  int p;
+
+  if (count < 0)
+    return (bash_kill_shellword (-count, key));
+
+  p = rl_point;
+  bash_backward_shellword (count, key);
+
+  if (rl_point != p)
+    rl_kill_text (p, rl_point);
+
+  if (rl_editing_mode == EMACS_EDITING_MODE)	/* 1 == emacs_mode */
+    rl_mark = rl_point;
+
+  return 0;
+}
+
+static int
+bash_transpose_shellwords (count, key)
+     int count, key;
+{
+  char *word1, *word2;
+  int w1_beg, w1_end, w2_beg, w2_end;
+  int orig_point = rl_point;
+
+  if (count == 0)
+    return 0;
+
+  /* Find the two shell words. */
+  bash_forward_shellword (count, key);
+  w2_end = rl_point;
+  bash_backward_shellword (1, key);
+  w2_beg = rl_point;
+  bash_backward_shellword (count, key);
+  w1_beg = rl_point;
+  bash_forward_shellword (1, key);
+  w1_end = rl_point;
+
+  /* check that there really are two words. */
+  if ((w1_beg == w2_beg) || (w2_beg < w1_end))
+    {
+      rl_ding ();
+      rl_point = orig_point;
+      return 1;
+    }
+
+  /* Get the text of the words. */
+  word1 = rl_copy_text (w1_beg, w1_end);
+  word2 = rl_copy_text (w2_beg, w2_end);
+
+  /* We are about to do many insertions and deletions.  Remember them
+     as one operation. */
+  rl_begin_undo_group ();
+
+  /* Do the stuff at word2 first, so that we don't have to worry
+     about word1 moving. */
+  rl_point = w2_beg;
+  rl_delete_text (w2_beg, w2_end);
+  rl_insert_text (word1);
+
+  rl_point = w1_beg;
+  rl_delete_text (w1_beg, w1_end);
+  rl_insert_text (word2);
+
+  /* This is exactly correct since the text before this point has not
+     changed in length. */
+  rl_point = w2_end;
+
+  /* I think that does it. */
+  rl_end_undo_group ();
+  xfree (word1);
+  xfree (word2);
+
+  return 0;
+}
+
+/* **************************************************************** */
+/*								    */
+/*			How To Do Shell Completion		    */
+/*								    */
+/* **************************************************************** */
+
+#define COMMAND_SEPARATORS ";|&{(`"
+/* )} */ 
+#define COMMAND_SEPARATORS_PLUS_WS ";|&{(` \t"
+/* )} */ 
+
+/* check for redirections and other character combinations that are not
+   command separators */
+static int
+check_redir (ti)
+     int ti;
+{
+  register int this_char, prev_char;
+
+  /* Handle the two character tokens `>&', `<&', and `>|'.
+     We are not in a command position after one of these. */
+  this_char = rl_line_buffer[ti];
+  prev_char = (ti > 0) ? rl_line_buffer[ti - 1] : 0;
+
+  if ((this_char == '&' && (prev_char == '<' || prev_char == '>')) ||
+      (this_char == '|' && prev_char == '>'))
+    return (1);
+  else if (this_char == '{' && prev_char == '$') /*}*/
+    return (1);
+#if 0	/* Not yet */
+  else if (this_char == '(' && prev_char == '$') /*)*/
+    return (1);
+  else if (this_char == '(' && prev_char == '<') /*)*/
+    return (1);
+#if defined (EXTENDED_GLOB)
+  else if (extended_glob && this_char == '(' && prev_char == '!') /*)*/
+    return (1);
+#endif
+#endif
+  else if (char_is_quoted (rl_line_buffer, ti))
+    return (1);
+  return (0);
+}
+
+#if defined (PROGRAMMABLE_COMPLETION)
+/*
+ * XXX - because of the <= start test, and setting os = s+1, this can
+ * potentially return os > start.  This is probably not what we want to
+ * happen, but fix later after 2.05a-release.
+ */
+static int
+find_cmd_start (start)
+     int start;
+{
+  register int s, os, ns;
+
+  os = 0;
+  /* Flags == SD_NOJMP only because we want to skip over command substitutions
+     in assignment statements.  Have to test whether this affects `standalone'
+     command substitutions as individual words. */
+  while (((s = skip_to_delim (rl_line_buffer, os, COMMAND_SEPARATORS, SD_NOJMP|SD_COMPLETE/*|SD_NOSKIPCMD*/)) <= start) &&
+	 rl_line_buffer[s])
+    {
+      /* Handle >| token crudely; treat as > not | */
+      if (s > 0 && rl_line_buffer[s] == '|' && rl_line_buffer[s-1] == '>')
+	{
+	  ns = skip_to_delim (rl_line_buffer, s+1, COMMAND_SEPARATORS, SD_NOJMP|SD_COMPLETE/*|SD_NOSKIPCMD*/);
+	  if (ns > start || rl_line_buffer[ns] == 0)
+	    return os;
+	  os = ns+1;
+	  continue;
+	}
+      /* The only reserved word in COMMAND_SEPARATORS is `{', so handle that
+	 specially, making sure it's in a spot acceptable for reserved words */
+      if (s >= os && rl_line_buffer[s] == '{')
+	{
+	  int pc, nc;	/* index of previous non-whitespace, next char */
+	  for (pc = (s > os) ? s - 1 : os; pc > os && whitespace(rl_line_buffer[pc]); pc--)
+	    ;
+	  nc = rl_line_buffer[s+1];
+	  /* must be preceded by a command separator or be the first non-
+	     whitespace character since the last command separator, and
+	     followed by a shell break character (not another `{') to be a reserved word. */
+	  if ((pc > os && (rl_line_buffer[s-1] == '{' || strchr (COMMAND_SEPARATORS, rl_line_buffer[pc]) == 0)) ||
+	      (shellbreak(nc) == 0))	/* }} */
+	    {
+	      /* Not a reserved word, look for another delim */
+	      ns = skip_to_delim (rl_line_buffer, s+1, COMMAND_SEPARATORS, SD_NOJMP|SD_COMPLETE/*|SD_NOSKIPCMD*/);
+	      if (ns > start || rl_line_buffer[ns] == 0)
+		return os;
+	      os = ns+1;
+	      continue;
+	    }
+	}
+      os = s+1;
+    }
+  return os;
+}
+
+static int
+find_cmd_end (end)
+     int end;
+{
+  register int e;
+
+  e = skip_to_delim (rl_line_buffer, end, COMMAND_SEPARATORS, SD_NOJMP|SD_COMPLETE);
+  return e;
+}
+
+static char *
+find_cmd_name (start, sp, ep)
+     int start;
+     int *sp, *ep;
+{
+  char *name;
+  register int s, e;
+
+  for (s = start; whitespace (rl_line_buffer[s]); s++)
+    ;
+
+  /* skip until a shell break character */
+  e = skip_to_delim (rl_line_buffer, s, "()<>;&| \t\n", SD_NOJMP|SD_COMPLETE);
+
+  name = substring (rl_line_buffer, s, e);
+
+  if (sp)
+    *sp = s;
+  if (ep)
+    *ep = e;
+
+  return (name);
+}
+
+static char *
+prog_complete_return (text, matchnum)
+     const char *text;
+     int matchnum;
+{
+  static int ind;
+
+  if (matchnum == 0)
+    ind = 0;
+
+  if (prog_complete_matches == 0 || prog_complete_matches[ind] == 0)
+    return (char *)NULL;
+  return (prog_complete_matches[ind++]);
+}
+
+#endif /* PROGRAMMABLE_COMPLETION */
+
+/* Try and catch completion attempts that are syntax errors or otherwise
+   invalid. */
+static int
+invalid_completion (text, ind)
+     const char *text;
+     int ind;
+{
+  int pind;
+
+  /* If we don't catch these here, the next clause will */
+  if (ind > 0 && rl_line_buffer[ind] == '(' &&	/*)*/
+		 member (rl_line_buffer[ind-1], "$<>"))
+    return 0;
+
+  pind = ind - 1;
+  while (pind > 0 && whitespace (rl_line_buffer[pind]))
+    pind--;
+  /* If we have only whitespace preceding a paren, it's valid */
+  if (ind >= 0 && pind <= 0 && rl_line_buffer[ind] == '(')	/*)*/
+    return 0;
+  /* Flag the invalid completions, which are mostly syntax errors */
+  if (ind > 0 && rl_line_buffer[ind] == '(' &&	/*)*/
+		 member (rl_line_buffer[pind], COMMAND_SEPARATORS) == 0)
+    return 1;
+
+  return 0;
+}
+
+/* Do some completion on TEXT.  The indices of TEXT in RL_LINE_BUFFER are
+   at START and END.  Return an array of matches, or NULL if none. */
+static char **
+attempt_shell_completion (text, start, end)
+     const char *text;
+     int start, end;
+{
+  int in_command_position, ti, qc, dflags;
+  char **matches, *command_separator_chars;
+#if defined (PROGRAMMABLE_COMPLETION)
+  int have_progcomps, was_assignment;
+  COMPSPEC *iw_compspec;
+#endif
+
+  command_separator_chars = COMMAND_SEPARATORS;
+  matches = (char **)NULL;
+  rl_ignore_some_completions_function = filename_completion_ignore;
+
+  rl_filename_quote_characters = default_filename_quote_characters;
+  set_filename_bstab (rl_filename_quote_characters);
+  set_directory_hook ();
+  rl_filename_stat_hook = bash_filename_stat_hook;
+
+  rl_sort_completion_matches = 1;	/* sort by default */
+
+  /* Determine if this could be a command word.  It is if it appears at
+     the start of the line (ignoring preceding whitespace), or if it
+     appears after a character that separates commands.  It cannot be a
+     command word if we aren't at the top-level prompt. */
+  ti = start - 1;
+  qc = -1;
+
+  while ((ti > -1) && (whitespace (rl_line_buffer[ti])))
+    ti--;
+
+#if 1
+  /* If this is an open quote, maybe we're trying to complete a quoted
+     command name. */
+  if (ti >= 0 && (rl_line_buffer[ti] == '"' || rl_line_buffer[ti] == '\''))
+    {
+      qc = rl_line_buffer[ti];
+      ti--;
+      while (ti > -1 && (whitespace (rl_line_buffer[ti])))
+	ti--;
+    }
+#endif
+      
+  in_command_position = 0;
+  if (ti < 0)
+    {
+      /* Only do command completion at the start of a line when we
+	 are prompting at the top level. */
+      if (current_prompt_string == ps1_prompt)
+	in_command_position++;
+      else if (parser_in_command_position ())
+	in_command_position++;
+    }
+  else if (member (rl_line_buffer[ti], command_separator_chars))
+    {
+      in_command_position++;
+
+      if (check_redir (ti) == 1)
+	in_command_position = 0;
+    }
+  else
+    {
+      /* This still could be in command position.  It is possible
+	 that all of the previous words on the line are variable
+	 assignments. */
+    }
+
+  if (in_command_position && invalid_completion (text, ti))
+    {
+      rl_attempted_completion_over = 1;
+      return ((char **)NULL);
+    }
+
+  /* Check that we haven't incorrectly flagged a closed command substitution
+     as indicating we're in a command position. */
+  if (in_command_position && ti >= 0 && rl_line_buffer[ti] == '`' &&
+	*text != '`' && unclosed_pair (rl_line_buffer, end, "`") == 0)
+    in_command_position = 0;
+
+  /* Special handling for command substitution.  If *TEXT is a backquote,
+     it can be the start or end of an old-style command substitution, or
+     unmatched.  If it's unmatched, both calls to unclosed_pair will
+     succeed.  Don't bother if readline found a single quote and we are
+     completing on the substring.  */
+  if (*text == '`' && rl_completion_quote_character != '\'' &&
+	(in_command_position || (unclosed_pair (rl_line_buffer, start, "`") &&
+				 unclosed_pair (rl_line_buffer, end, "`"))))
+    matches = rl_completion_matches (text, command_subst_completion_function);
+
+#if defined (PROGRAMMABLE_COMPLETION)
+  /* Attempt programmable completion. */
+  have_progcomps = prog_completion_enabled && (progcomp_size () > 0);
+  iw_compspec = progcomp_search (INITIALWORD);
+  if (matches == 0 &&
+      (in_command_position == 0 || text[0] == '\0' || (in_command_position && iw_compspec)) &&
+      current_prompt_string == ps1_prompt)
+    {
+      int s, e, s1, e1, os, foundcs;
+      char *n;
+
+      /* XXX - don't free the members */
+      if (prog_complete_matches)
+	free (prog_complete_matches);
+      prog_complete_matches = (char **)NULL;
+
+      os = start;
+      n = 0;
+      was_assignment = 0;
+      s = find_cmd_start (os);
+      e = find_cmd_end (end);
+      do
+	{
+	  /* Don't read past the end of rl_line_buffer */
+	  if (s > rl_end)
+	    {
+	      s1 = s = e1;
+	      break;
+	    }
+	  /* Or past point if point is within an assignment statement */
+	  else if (was_assignment && s > rl_point)
+	    {
+	      s1 = s = e1;
+	      break;
+	    }
+	  /* Skip over assignment statements preceding a command name.  If we
+	     don't find a command name at all, we can perform command name
+	     completion.  If we find a partial command name, we should perform
+	     command name completion on it. */
+	  FREE (n);
+	  n = find_cmd_name (s, &s1, &e1);
+	  s = e1 + 1;
+	}
+      while (was_assignment = assignment (n, 0));
+      s = s1;		/* reset to index where name begins */
+
+      /* s == index of where command name begins (reset above)
+	 e == end of current command, may be end of line
+         s1 = index of where command name begins
+         e1 == index of where command name ends
+	 start == index of where word to be completed begins
+	 end == index of where word to be completed ends
+	 if (s == start) we are doing command word completion for sure
+	 if (e1 == end) we are at the end of the command name and completing it */
+      if (start == 0 && end == 0 && e != 0 && text[0] == '\0')	/* beginning of non-empty line */
+        foundcs = 0;
+      else if (start == end && start == s1 && e != 0 && e1 > end)	/* beginning of command name, leading whitespace */
+	foundcs = 0;
+      else if (e == 0 && e == s && text[0] == '\0' && have_progcomps)	/* beginning of empty line */
+        prog_complete_matches = programmable_completions (EMPTYCMD, text, s, e, &foundcs);
+      else if (start == end && text[0] == '\0' && s1 > start && whitespace (rl_line_buffer[start]))
+        foundcs = 0;		/* whitespace before command name */
+      else if (e > s && was_assignment == 0 && e1 == end && rl_line_buffer[e] == 0 && whitespace (rl_line_buffer[e-1]) == 0)
+	{
+	  /* not assignment statement, but still want to perform command
+	     completion if we are composing command word. */
+	  foundcs = 0;
+	  in_command_position = s == start && STREQ (n, text);	/* XXX */
+	}
+      else if (e > s && was_assignment == 0 && have_progcomps)
+	{
+	  prog_complete_matches = programmable_completions (n, text, s, e, &foundcs);
+	  /* command completion if programmable completion fails */
+	  /* If we have a completion for the initial word, we can prefer that */
+	  in_command_position = s == start && (iw_compspec || STREQ (n, text));	/* XXX */
+	  if (iw_compspec && in_command_position)
+	    foundcs = 0;
+	}
+      /* empty command name following command separator */
+      else if (s >= e && n[0] == '\0' && text[0] == '\0' && start > 0 &&
+		was_assignment == 0 && member (rl_line_buffer[start-1], COMMAND_SEPARATORS))
+	{
+	  foundcs = 0;
+	  in_command_position = 1;
+	}
+      else if (s >= e && n[0] == '\0' && text[0] == '\0' && start > 0)
+        {
+          foundcs = 0;	/* empty command name following optional assignments */
+          in_command_position += was_assignment;
+        }
+      else if (s == start && e == end && STREQ (n, text) && start > 0)
+        {
+          foundcs = 0;	/* partial command name following assignments */
+          in_command_position = 1;
+        }
+      else
+	foundcs = 0;
+
+      /* If we have defined a compspec for the initial (command) word, call
+	 it and process the results like any other programmable completion. */
+      if (in_command_position && have_progcomps && foundcs == 0 && iw_compspec)
+	prog_complete_matches = programmable_completions (INITIALWORD, text, s, e, &foundcs);
+
+      FREE (n);
+      /* XXX - if we found a COMPSPEC for the command, just return whatever
+	 the programmable completion code returns, and disable the default
+	 filename completion that readline will do unless the COPT_DEFAULT
+	 option has been set with the `-o default' option to complete or
+	 compopt. */
+      if (foundcs)
+	{
+	  pcomp_set_readline_variables (foundcs, 1);
+	  /* Turn what the programmable completion code returns into what
+	     readline wants.  I should have made compute_lcd_of_matches
+	     external... */
+	  matches = rl_completion_matches (text, prog_complete_return);
+	  if ((foundcs & COPT_DEFAULT) == 0)
+	    rl_attempted_completion_over = 1;	/* no default */
+	  if (matches || ((foundcs & COPT_BASHDEFAULT) == 0))
+	    return (matches);
+	}
+    }
+#endif
+
+  if (matches == 0)
+    {
+      dflags = 0;
+      if (in_command_position)
+	dflags |= DEFCOMP_CMDPOS;
+      matches = bash_default_completion (text, start, end, qc, dflags);
+    }
+
+  return matches;
+}
+
+char **
+bash_default_completion (text, start, end, qc, compflags)
+     const char *text;
+     int start, end, qc, compflags;
+{
+  char **matches, *t;
+
+  matches = (char **)NULL;
+
+  /* New posix-style command substitution or variable name? */
+  if (*text == '$')
+    {
+      if (qc != '\'' && text[1] == '(') /* ) */
+	matches = rl_completion_matches (text, command_subst_completion_function);
+      else
+	{
+	  matches = rl_completion_matches (text, variable_completion_function);
+	  /* If a single match, see if it expands to a directory name and append
+	     a slash if it does.  This requires us to expand the variable name,
+	     so we don't want to display errors if the variable is unset.  This
+	     can happen with dynamic variables whose value has never been
+	     requested. */
+	  if (matches && matches[0] && matches[1] == 0)
+	    {
+	      t = savestring (matches[0]);
+	      bash_filename_stat_hook (&t);
+	      /* doesn't use test_for_directory because that performs tilde
+		 expansion */
+	      if (file_isdir (t))
+		rl_completion_append_character = '/';
+	      free (t);
+	    }
+	}
+    }
+
+  /* If the word starts in `~', and there is no slash in the word, then
+     try completing this word as a username. */
+  if (matches == 0 && *text == '~' && mbschr (text, '/') == 0)
+    matches = rl_completion_matches (text, rl_username_completion_function);
+
+  /* Another one.  Why not?  If the word starts in '@', then look through
+     the world of known hostnames for completion first. */
+  if (matches == 0 && perform_hostname_completion && *text == '@')
+    matches = rl_completion_matches (text, hostname_completion_function);
+
+  /* And last, (but not least) if this word is in a command position, then
+     complete over possible command names, including aliases, functions,
+     and command names. */
+  if (matches == 0 && (compflags & DEFCOMP_CMDPOS))
+    {
+      /* If END == START and text[0] == 0, we are trying to complete an empty
+	 command word. */
+      if (no_empty_command_completion && end == start && text[0] == '\0')
+	{
+	  matches = (char **)NULL;
+	  rl_ignore_some_completions_function = bash_ignore_everything;
+	}
+      else
+	{
+#define CMD_IS_DIR(x)	(absolute_pathname(x) == 0 && absolute_program(x) == 0 && *(x) != '~' && test_for_directory (x))
+
+	  dot_in_path = 0;
+	  matches = rl_completion_matches (text, command_word_completion_function);
+
+	  /* If we are attempting command completion and nothing matches, we
+	     do not want readline to perform filename completion for us.  We
+	     still want to be able to complete partial pathnames, so set the
+	     completion ignore function to something which will remove
+	     filenames and leave directories in the match list. */
+	  if (matches == (char **)NULL)
+	    rl_ignore_some_completions_function = bash_ignore_filenames;
+	  else if (matches[1] == 0 && CMD_IS_DIR(matches[0]) && dot_in_path == 0)
+	    /* If we found a single match, without looking in the current
+	       directory (because it's not in $PATH), but the found name is
+	       also a command in the current directory, suppress appending any
+	       terminating character, since it's ambiguous. */
+	    {
+	      rl_completion_suppress_append = 1;
+	      rl_filename_completion_desired = 0;
+	    }
+	  else if (matches[0] && matches[1] && STREQ (matches[0], matches[1]) && CMD_IS_DIR (matches[0]))
+	    /* There are multiple instances of the same match (duplicate
+	       completions haven't yet been removed).  In this case, all of
+	       the matches will be the same, and the duplicate removal code
+	       will distill them all down to one.  We turn on
+	       rl_completion_suppress_append for the same reason as above.
+	       Remember: we only care if there's eventually a single unique
+	       completion.  If there are multiple completions this won't
+	       make a difference and the problem won't occur. */
+	    {
+	      rl_completion_suppress_append = 1;
+	      rl_filename_completion_desired = 0;
+	    }
+	}
+    }
+
+  /* This could be a globbing pattern, so try to expand it using pathname
+     expansion. */
+  if (!matches && completion_glob_pattern ((char *)text))
+    {
+      matches = rl_completion_matches (text, glob_complete_word);
+      /* A glob expression that matches more than one filename is problematic.
+	 If we match more than one filename, punt. */
+      if (matches && matches[1] && rl_completion_type == TAB)
+	{
+	  strvec_dispose (matches);
+	  matches = (char **)0;
+	}
+      else if (matches && matches[1] && rl_completion_type == '!')
+	{
+	  rl_completion_suppress_append = 1;
+	  rl_filename_completion_desired = 0;
+	}
+    }
+
+  return (matches);
+}
+
+static int
+bash_command_name_stat_hook (name)
+     char **name;
+{
+  char *cname, *result;
+
+  /* If it's not something we're going to look up in $PATH, just call the
+     normal filename stat hook. */
+  if (absolute_program (*name))
+    return (bash_filename_stat_hook (name));
+
+  cname = *name;
+  /* XXX - we could do something here with converting aliases, builtins,
+     and functions into something that came out as executable, but we don't. */
+  result = search_for_command (cname, 0);
+  if (result)
+    {
+      *name = result;
+      return 1;
+    }
+  return 0;
+}
+
+static int
+executable_completion (filename, searching_path)
+     const char *filename;
+     int searching_path;
+{
+  char *f;
+  int r;
+
+  f = savestring (filename);
+  bash_directory_completion_hook (&f);
+  
+  r = searching_path ? executable_file (f) : executable_or_directory (f);
+  free (f);
+  return r;
+}
+
+/* This is the function to call when the word to complete is in a position
+   where a command word can be found.  It grovels $PATH, looking for commands
+   that match.  It also scans aliases, function names, and the shell_builtin
+   table. */
+char *
+command_word_completion_function (hint_text, state)
+     const char *hint_text;
+     int state;
+{
+  static char *hint = (char *)NULL;
+  static char *path = (char *)NULL;
+  static char *val = (char *)NULL;
+  static char *filename_hint = (char *)NULL;
+  static char *fnhint = (char *)NULL;
+  static char *dequoted_hint = (char *)NULL;
+  static char *directory_part = (char *)NULL;
+  static char **glob_matches = (char **)NULL;
+  static int path_index, hint_len, istate, igncase;
+  static int mapping_over, local_index, searching_path, hint_is_dir;
+  static int old_glob_ignore_case, globpat;
+  static SHELL_VAR **varlist = (SHELL_VAR **)NULL;
+#if defined (ALIAS)
+  static alias_t **alias_list = (alias_t **)NULL;
+#endif /* ALIAS */
+  char *temp, *cval;
+
+  /* We have to map over the possibilities for command words.  If we have
+     no state, then make one just for that purpose. */
+  if (state == 0)
+    {
+      rl_filename_stat_hook = bash_command_name_stat_hook;
+
+      if (dequoted_hint && dequoted_hint != hint)
+	free (dequoted_hint);
+      if (hint)
+	free (hint);
+
+      mapping_over = searching_path = 0;
+      hint_is_dir = CMD_IS_DIR (hint_text);
+      val = (char *)NULL;
+
+      temp = rl_variable_value ("completion-ignore-case");
+      igncase = RL_BOOLEAN_VARIABLE_VALUE (temp);
+
+      if (glob_matches)
+	{
+	  free (glob_matches);
+	  glob_matches = (char **)NULL;
+	}
+
+      globpat = completion_glob_pattern ((char *)hint_text);
+
+      /* If this is an absolute program name, do not check it against
+	 aliases, reserved words, functions or builtins.  We must check
+	 whether or not it is unique, and, if so, whether that filename
+	 is executable. */
+      if (globpat || absolute_program (hint_text))
+	{
+	  /* Perform tilde expansion on what's passed, so we don't end up
+	     passing filenames with tildes directly to stat().  The rest of
+	     the shell doesn't do variable expansion on the word following
+	     the tilde, so we don't do it here even if direxpand is set. */
+	  if (*hint_text == '~')
+	    {
+	      hint = bash_tilde_expand (hint_text, 0);
+	      directory_part = savestring (hint_text);
+	      temp = strchr (directory_part, '/');
+	      if (temp)
+		*temp = 0;
+	      else
+		{
+		  free (directory_part);
+		  directory_part = (char *)NULL;
+		}
+	    }
+	  else if (dircomplete_expand)
+	    {
+	      hint = savestring (hint_text);
+	      bash_directory_completion_hook (&hint);
+	    }
+	  else
+	    hint = savestring (hint_text);
+
+	  dequoted_hint = hint;
+	  /* If readline's completer found a quote character somewhere, but
+	     didn't set the quote character, there must have been a quote
+	     character embedded in the filename.  It can't be at the start of
+	     the filename, so we need to dequote the filename before we look
+	     in the file system for it. */
+	  if (rl_completion_found_quote && rl_completion_quote_character == 0)
+	    {
+	      dequoted_hint = bash_dequote_filename (hint, 0);
+	      free (hint);
+	      hint = dequoted_hint;
+	    }
+	  hint_len = strlen (hint);
+
+	  if (filename_hint)
+	    free (filename_hint);
+
+	  fnhint = filename_hint = savestring (hint);
+
+	  istate = 0;
+
+	  if (globpat)
+	    {
+	      mapping_over = 5;
+	      goto globword;
+	    }
+	  else
+	    {
+	     if (dircomplete_expand && path_dot_or_dotdot (filename_hint))
+		{
+		  dircomplete_expand = 0;
+		  set_directory_hook ();
+		  dircomplete_expand = 1;
+		}
+	      mapping_over = 4;
+	      goto inner;
+	    }
+	}
+
+      dequoted_hint = hint = savestring (hint_text);
+      hint_len = strlen (hint);
+
+      if (rl_completion_found_quote && rl_completion_quote_character == 0)
+	dequoted_hint = bash_dequote_filename (hint, 0);
+      
+      path = get_string_value ("PATH");
+      path_index = dot_in_path = 0;
+
+      /* Initialize the variables for each type of command word. */
+      local_index = 0;
+
+      if (varlist)
+	free (varlist);
+
+      varlist = all_visible_functions ();
+
+#if defined (ALIAS)
+      if (alias_list)
+	free (alias_list);
+
+      alias_list = all_aliases ();
+#endif /* ALIAS */
+    }
+
+  /* mapping_over says what we are currently hacking.  Note that every case
+     in this list must fall through when there are no more possibilities. */
+
+  switch (mapping_over)
+    {
+    case 0:			/* Aliases come first. */
+#if defined (ALIAS)
+      while (alias_list && alias_list[local_index])
+	{
+	  register char *alias;
+
+	  alias = alias_list[local_index++]->name;
+
+	  if (igncase == 0 && (STREQN (alias, hint, hint_len)))
+	    return (savestring (alias));
+	  else if (igncase && strncasecmp (alias, hint, hint_len) == 0)
+	    return (savestring (alias));
+	}
+#endif /* ALIAS */
+      local_index = 0;
+      mapping_over++;
+
+    case 1:			/* Then shell reserved words. */
+      {
+	while (word_token_alist[local_index].word)
+	  {
+	    register char *reserved_word;
+
+	    reserved_word = word_token_alist[local_index++].word;
+
+	    if (STREQN (reserved_word, hint, hint_len))
+	      return (savestring (reserved_word));
+	  }
+	local_index = 0;
+	mapping_over++;
+      }
+
+    case 2:			/* Then function names. */
+      while (varlist && varlist[local_index])
+	{
+	  register char *varname;
+
+	  varname = varlist[local_index++]->name;
+
+	  /* Honor completion-ignore-case for shell function names. */
+	  if (igncase == 0 && (STREQN (varname, hint, hint_len)))
+	    return (savestring (varname));
+	  else if (igncase && strncasecmp (varname, hint, hint_len) == 0)
+	    return (savestring (varname));
+	}
+      local_index = 0;
+      mapping_over++;
+
+    case 3:			/* Then shell builtins. */
+      for (; local_index < num_shell_builtins; local_index++)
+	{
+	  /* Ignore it if it doesn't have a function pointer or if it
+	     is not currently enabled. */
+	  if (!shell_builtins[local_index].function ||
+	      (shell_builtins[local_index].flags & BUILTIN_ENABLED) == 0)
+	    continue;
+
+	  if (STREQN (shell_builtins[local_index].name, hint, hint_len))
+	    {
+	      int i = local_index++;
+
+	      return (savestring (shell_builtins[i].name));
+	    }
+	}
+      local_index = 0;
+      mapping_over++;
+    }
+
+globword:
+  /* Limited support for completing command words with globbing chars.  Only
+     a single match (multiple matches that end up reducing the number of
+     characters in the common prefix are bad) will ever be returned on
+     regular completion. */
+  if (globpat)
+    {
+      if (state == 0)
+	{
+	  glob_ignore_case = igncase;
+	  glob_matches = shell_glob_filename (hint, 0);
+	  glob_ignore_case = old_glob_ignore_case;
+
+	  if (GLOB_FAILED (glob_matches) || glob_matches == 0)
+	    {
+	      glob_matches = (char **)NULL;
+	      return ((char *)NULL);
+	    }
+
+	  local_index = 0;
+		
+	  if (glob_matches[1] && rl_completion_type == TAB)	/* multiple matches are bad */
+	    return ((char *)NULL);
+	}
+
+      while (val = glob_matches[local_index++])
+        {
+	  if (executable_or_directory (val))
+	    {
+	      if (*hint_text == '~' && directory_part)
+		{
+		  temp = maybe_restore_tilde (val, directory_part);
+		  free (val);
+		  val = temp;
+		}
+	      return (val);
+	    }
+	  free (val);
+        }
+
+      glob_ignore_case = old_glob_ignore_case;
+      return ((char *)NULL);
+    }
+
+  /* If the text passed is a directory in the current directory, return it
+     as a possible match.  Executables in directories in the current
+     directory can be specified using relative pathnames and successfully
+     executed even when `.' is not in $PATH. */
+  if (hint_is_dir)
+    {
+      hint_is_dir = 0;	/* only return the hint text once */
+      return (savestring (hint_text));
+    }
+    
+  /* Repeatedly call filename_completion_function while we have
+     members of PATH left.  Question:  should we stat each file?
+     Answer: we call executable_file () on each file. */
+ outer:
+
+  istate = (val != (char *)NULL);
+
+  if (istate == 0)
+    {
+      char *current_path;
+
+      /* Get the next directory from the path.  If there is none, then we
+	 are all done. */
+      if (path == 0 || path[path_index] == 0 ||
+	  (current_path = extract_colon_unit (path, &path_index)) == 0)
+	return ((char *)NULL);
+
+      searching_path = 1;
+      if (*current_path == 0)
+	{
+	  free (current_path);
+	  current_path = savestring (".");
+	}
+
+      if (*current_path == '~')
+	{
+	  char *t;
+
+	  t = bash_tilde_expand (current_path, 0);
+	  free (current_path);
+	  current_path = t;
+	}
+
+      if (current_path[0] == '.' && current_path[1] == '\0')
+	dot_in_path = 1;
+
+      if (fnhint && fnhint != filename_hint)
+	free (fnhint);
+      if (filename_hint)
+	free (filename_hint);
+
+      filename_hint = sh_makepath (current_path, hint, 0);
+      /* Need a quoted version (though it doesn't matter much in most
+	 cases) because rl_filename_completion_function dequotes the
+	 filename it gets, assuming that it's been quoted as part of
+	 the input line buffer. */
+      if (strpbrk (filename_hint, "\"'\\"))
+	fnhint = sh_backslash_quote (filename_hint, filename_bstab, 0);
+      else
+	fnhint = filename_hint;
+      free (current_path);		/* XXX */
+    }
+
+ inner:
+  val = rl_filename_completion_function (fnhint, istate);
+  if (mapping_over == 4 && dircomplete_expand)
+    set_directory_hook ();
+
+  istate = 1;
+
+  if (val == 0)
+    {
+      /* If the hint text is an absolute program, then don't bother
+	 searching through PATH. */
+      if (absolute_program (hint))
+	return ((char *)NULL);
+
+      goto outer;
+    }
+  else
+    {
+      int match, freetemp;
+
+      if (absolute_program (hint))
+	{
+	  if (igncase == 0)
+	    match = strncmp (val, hint, hint_len) == 0;
+	  else
+	    match = strncasecmp (val, hint, hint_len) == 0;
+
+	  /* If we performed tilde expansion, restore the original
+	     filename. */
+	  if (*hint_text == '~')
+	    temp = maybe_restore_tilde (val, directory_part);
+	  else
+	    temp = savestring (val);
+	  freetemp = 1;
+	}
+      else
+	{
+	  temp = strrchr (val, '/');
+
+	  if (temp)
+	    {
+	      temp++;
+	      if (igncase == 0)
+		freetemp = match = strncmp (temp, hint, hint_len) == 0;
+	      else
+		freetemp = match = strncasecmp (temp, hint, hint_len) == 0;
+	      if (match)
+		temp = savestring (temp);
+	    }
+	  else
+	    freetemp = match = 0;
+	}
+
+      /* If we have found a match, and it is an executable file, return it.
+	 We don't return directory names when searching $PATH, since the
+	 bash execution code won't find executables in directories which
+	 appear in directories in $PATH when they're specified using
+	 relative pathnames.  */
+#if 0
+      /* If we're not searching $PATH and we have a relative pathname, we
+	 need to re-canonicalize it before testing whether or not it's an
+	 executable or a directory so the shell treats .. relative to $PWD
+	 according to the physical/logical option.  The shell already
+	 canonicalizes the directory name in order to tell readline where
+	 to look, so not doing it here will be inconsistent. */
+      /* XXX -- currently not used -- will introduce more inconsistency,
+	 since shell does not canonicalize ../foo before passing it to
+	 shell_execve().  */
+      if (match && searching_path == 0 && *val == '.')
+	{
+	  char *t, *t1;
+
+	  t = get_working_directory ("command-word-completion");
+	  t1 = make_absolute (val, t);
+	  free (t);
+	  cval = sh_canonpath (t1, PATH_CHECKDOTDOT|PATH_CHECKEXISTS);
+	}
+      else
+#endif
+	cval = val;
+
+      if (match && executable_completion ((searching_path ? val : cval), searching_path))
+	{
+	  if (cval != val)
+	    free (cval);
+	  free (val);
+	  val = "";		/* So it won't be NULL. */
+	  return (temp);
+	}
+      else
+	{
+	  if (freetemp)
+	    free (temp);
+	  if (cval != val)
+	    free (cval);
+	  free (val);
+	  goto inner;
+	}
+    }
+}
+
+/* Completion inside an unterminated command substitution. */
+static char *
+command_subst_completion_function (text, state)
+     const char *text;
+     int state;
+{
+  static char **matches = (char **)NULL;
+  static const char *orig_start;
+  static char *filename_text = (char *)NULL;
+  static int cmd_index, start_len;
+  char *value;
+
+  if (state == 0)
+    {
+      if (filename_text)
+	free (filename_text);
+      orig_start = text;
+      if (*text == '`')
+	text++;
+      else if (*text == '$' && text[1] == '(')	/* ) */
+	text += 2;
+      /* If the text was quoted, suppress any quote character that the
+	 readline completion code would insert. */
+      rl_completion_suppress_quote = 1;
+      start_len = text - orig_start;
+      filename_text = savestring (text);
+      if (matches)
+	free (matches);
+
+      /*
+       * At this point we can entertain the idea of re-parsing
+       * `filename_text' into a (possibly incomplete) command name and
+       * arguments, and doing completion based on that.  This is
+       * currently very rudimentary, but it is a small improvement.
+       */
+      for (value = filename_text + strlen (filename_text) - 1; value > filename_text; value--)
+        if (whitespace (*value) || member (*value, COMMAND_SEPARATORS))
+          break;
+      if (value <= filename_text)
+	matches = rl_completion_matches (filename_text, command_word_completion_function);
+      else
+	{
+	  value++;
+	  start_len += value - filename_text;
+	  if (whitespace (value[-1]))
+	    matches = rl_completion_matches (value, rl_filename_completion_function);
+	  else
+	    matches = rl_completion_matches (value, command_word_completion_function);
+	}
+
+      /* If there is more than one match, rl_completion_matches has already
+	 put the lcd in matches[0].  Skip over it. */
+      cmd_index = matches && matches[0] && matches[1];
+
+      /* If there's a single match and it's a directory, set the append char
+	 to the expected `/'.  Otherwise, don't append anything. */
+      if (matches && matches[0] && matches[1] == 0 && test_for_directory (matches[0]))
+	rl_completion_append_character = '/';
+      else
+	rl_completion_suppress_append = 1;
+    }
+
+  if (matches == 0 || matches[cmd_index] == 0)
+    {
+      rl_filename_quoting_desired = 0;	/* disable quoting */
+      return ((char *)NULL);
+    }
+  else
+    {
+      value = (char *)xmalloc (1 + start_len + strlen (matches[cmd_index]));
+
+      if (start_len == 1)
+	value[0] = *orig_start;
+      else
+	strncpy (value, orig_start, start_len);
+
+      strcpy (value + start_len, matches[cmd_index]);
+
+      cmd_index++;
+      return (value);
+    }
+}
+
+/* Okay, now we write the entry_function for variable completion. */
+static char *
+variable_completion_function (text, state)
+     const char *text;
+     int state;
+{
+  static char **varlist = (char **)NULL;
+  static int varlist_index;
+  static char *varname = (char *)NULL;
+  static int first_char, first_char_loc;
+
+  if (!state)
+    {
+      if (varname)
+	free (varname);
+
+      first_char_loc = 0;
+      first_char = text[0];
+
+      if (first_char == '$')
+	first_char_loc++;
+
+      if (text[first_char_loc] == '{')
+	first_char_loc++;
+
+      varname = savestring (text + first_char_loc);
+
+      if (varlist)
+	strvec_dispose (varlist);
+
+      varlist = all_variables_matching_prefix (varname);
+      varlist_index = 0;
+    }
+
+  if (!varlist || !varlist[varlist_index])
+    {
+      return ((char *)NULL);
+    }
+  else
+    {
+      char *value;
+
+      value = (char *)xmalloc (4 + strlen (varlist[varlist_index]));
+
+      if (first_char_loc)
+	{
+	  value[0] = first_char;
+	  if (first_char_loc == 2)
+	    value[1] = '{';
+	}
+
+      strcpy (value + first_char_loc, varlist[varlist_index]);
+      if (first_char_loc == 2)
+	strcat (value, "}");
+
+      varlist_index++;
+      return (value);
+    }
+}
+
+/* How about a completion function for hostnames? */
+static char *
+hostname_completion_function (text, state)
+     const char *text;
+     int state;
+{
+  static char **list = (char **)NULL;
+  static int list_index = 0;
+  static int first_char, first_char_loc;
+
+  /* If we don't have any state, make some. */
+  if (state == 0)
+    {
+      FREE (list);
+
+      list = (char **)NULL;
+
+      first_char_loc = 0;
+      first_char = *text;
+
+      if (first_char == '@')
+	first_char_loc++;
+
+      list = hostnames_matching ((char *)text+first_char_loc);
+      list_index = 0;
+    }
+
+  if (list && list[list_index])
+    {
+      char *t;
+
+      t = (char *)xmalloc (2 + strlen (list[list_index]));
+      *t = first_char;
+      strcpy (t + first_char_loc, list[list_index]);
+      list_index++;
+      return (t);
+    }
+
+  return ((char *)NULL);
+}
+
+/*
+ * A completion function for service names from /etc/services (or wherever).
+ */
+char *
+bash_servicename_completion_function (text, state)
+     const char *text;
+     int state;
+{
+#if defined (__WIN32__) || defined (__OPENNT) || !defined (HAVE_GETSERVENT)
+  return ((char *)NULL);
+#else
+  static char *sname = (char *)NULL;
+  static struct servent *srvent;
+  static int snamelen;
+  char *value;
+  char **alist, *aentry;
+  int afound;
+
+  if (state == 0)
+    {
+      FREE (sname);
+
+      sname = savestring (text);
+      snamelen = strlen (sname);
+      setservent (0);
+    }
+
+  while (srvent = getservent ())
+    {
+      afound = 0;
+      if (snamelen == 0 || (STREQN (sname, srvent->s_name, snamelen)))
+	break;
+      /* Not primary, check aliases */
+      for (alist = srvent->s_aliases; *alist; alist++)
+	{
+	  aentry = *alist;
+	  if (STREQN (sname, aentry, snamelen))
+	    {
+	      afound = 1;
+	      break;
+	    }
+	}
+
+      if (afound)
+	break;
+    }
+
+  if (srvent == 0)
+    {
+      endservent ();
+      return ((char *)NULL);
+    }
+
+  value = afound ? savestring (aentry) : savestring (srvent->s_name);
+  return value;
+#endif
+}
+
+/*
+ * A completion function for group names from /etc/group (or wherever).
+ */
+char *
+bash_groupname_completion_function (text, state)
+     const char *text;
+     int state;
+{
+#if defined (__WIN32__) || defined (__OPENNT) || !defined (HAVE_GRP_H)
+  return ((char *)NULL);
+#else
+  static char *gname = (char *)NULL;
+  static struct group *grent;
+  static int gnamelen;
+  char *value;
+
+  if (state == 0)
+    {
+      FREE (gname);
+      gname = savestring (text);
+      gnamelen = strlen (gname);
+
+      setgrent ();
+    }
+
+  while (grent = getgrent ())
+    {
+      if (gnamelen == 0 || (STREQN (gname, grent->gr_name, gnamelen)))
+        break;
+    }
+
+  if (grent == 0)
+    {
+      endgrent ();
+      return ((char *)NULL);
+    }
+
+  value = savestring (grent->gr_name);
+  return (value);
+#endif
+}
+
+/* Functions to perform history and alias expansions on the current line. */
+
+#if defined (BANG_HISTORY)
+/* Perform history expansion on the current line.  If no history expansion
+   is done, pre_process_line() returns what it was passed, so we need to
+   allocate a new line here. */
+static char *
+history_expand_line_internal (line)
+     char *line;
+{
+  char *new_line;
+  int old_verify;
+
+  old_verify = hist_verify;
+  hist_verify = 0;
+  new_line = pre_process_line (line, 0, 0);
+  hist_verify = old_verify;
+
+  return (new_line == line) ? savestring (line) : new_line;
+}
+#endif
+
+/* There was an error in expansion.  Let the preprocessor print
+   the error here. */
+static void
+cleanup_expansion_error ()
+{
+  char *to_free;
+#if defined (BANG_HISTORY)
+  int old_verify;
+
+  old_verify = hist_verify;
+  hist_verify = 0;
+#endif
+
+  fprintf (rl_outstream, "\r\n");
+  to_free = pre_process_line (rl_line_buffer, 1, 0);
+#if defined (BANG_HISTORY)
+  hist_verify = old_verify;
+#endif
+  if (to_free != rl_line_buffer)
+    FREE (to_free);
+  putc ('\r', rl_outstream);
+  rl_forced_update_display ();
+}
+
+/* If NEW_LINE differs from what is in the readline line buffer, add an
+   undo record to get from the readline line buffer contents to the new
+   line and make NEW_LINE the current readline line. */
+static void
+maybe_make_readline_line (new_line)
+     char *new_line;
+{
+  if (new_line && strcmp (new_line, rl_line_buffer) != 0)
+    {
+      rl_point = rl_end;
+
+      rl_add_undo (UNDO_BEGIN, 0, 0, 0);
+      rl_delete_text (0, rl_point);
+      rl_point = rl_end = rl_mark = 0;
+      rl_insert_text (new_line);
+      rl_add_undo (UNDO_END, 0, 0, 0);
+    }
+}
+
+/* Make NEW_LINE be the current readline line.  This frees NEW_LINE. */
+static void
+set_up_new_line (new_line)
+     char *new_line;
+{
+  int old_point, at_end;
+
+  old_point = rl_point;
+  at_end = rl_point == rl_end;
+
+  /* If the line was history and alias expanded, then make that
+     be one thing to undo. */
+  maybe_make_readline_line (new_line);
+  free (new_line);
+
+  /* Place rl_point where we think it should go. */
+  if (at_end)
+    rl_point = rl_end;
+  else if (old_point < rl_end)
+    {
+      rl_point = old_point;
+      if (!whitespace (rl_line_buffer[rl_point]))
+	rl_forward_word (1, 0);
+    }
+}
+
+#if defined (ALIAS)
+/* Expand aliases in the current readline line. */
+static int
+alias_expand_line (count, ignore)
+     int count, ignore;
+{
+  char *new_line;
+
+  new_line = alias_expand (rl_line_buffer);
+
+  if (new_line)
+    {
+      set_up_new_line (new_line);
+      return (0);
+    }
+  else
+    {
+      cleanup_expansion_error ();
+      return (1);
+    }
+}
+#endif
+
+#if defined (BANG_HISTORY)
+/* History expand the line. */
+static int
+history_expand_line (count, ignore)
+     int count, ignore;
+{
+  char *new_line;
+
+  new_line = history_expand_line_internal (rl_line_buffer);
+
+  if (new_line)
+    {
+      set_up_new_line (new_line);
+      return (0);
+    }
+  else
+    {
+      cleanup_expansion_error ();
+      return (1);
+    }
+}
+
+/* Expand history substitutions in the current line and then insert a
+   space (hopefully close to where we were before). */
+static int
+tcsh_magic_space (count, ignore)
+     int count, ignore;
+{
+  int dist_from_end, old_point;
+
+  old_point = rl_point;
+  dist_from_end = rl_end - rl_point;
+  if (history_expand_line (count, ignore) == 0)
+    {
+      /* Try a simple heuristic from Stephen Gildea <gildea@intouchsys.com>.
+	 This works if all expansions were before rl_point or if no expansions
+	 were performed. */
+      rl_point = (old_point == 0) ? old_point : rl_end - dist_from_end;
+      rl_insert (1, ' ');
+      return (0);
+    }
+  else
+    return (1);
+}
+#endif /* BANG_HISTORY */
+
+/* History and alias expand the line. */
+static int
+history_and_alias_expand_line (count, ignore)
+     int count, ignore;
+{
+  char *new_line;
+
+  new_line = 0;
+#if defined (BANG_HISTORY)
+  new_line = history_expand_line_internal (rl_line_buffer);
+#endif
+
+#if defined (ALIAS)
+  if (new_line)
+    {
+      char *alias_line;
+
+      alias_line = alias_expand (new_line);
+      free (new_line);
+      new_line = alias_line;
+    }
+#endif /* ALIAS */
+
+  if (new_line)
+    {
+      set_up_new_line (new_line);
+      return (0);
+    }
+  else
+    {
+      cleanup_expansion_error ();
+      return (1);
+    }
+}
+
+/* History and alias expand the line, then perform the shell word
+   expansions by calling expand_string.  This can't use set_up_new_line()
+   because we want the variable expansions as a separate undo'able
+   set of operations. */
+static int
+shell_expand_line (count, ignore)
+     int count, ignore;
+{
+  char *new_line;
+  WORD_LIST *expanded_string;
+  WORD_DESC *w;
+
+  new_line = 0;
+#if defined (BANG_HISTORY)
+  new_line = history_expand_line_internal (rl_line_buffer);
+#endif
+
+#if defined (ALIAS)
+  if (new_line)
+    {
+      char *alias_line;
+
+      alias_line = alias_expand (new_line);
+      free (new_line);
+      new_line = alias_line;
+    }
+#endif /* ALIAS */
+
+  if (new_line)
+    {
+      int old_point = rl_point;
+      int at_end = rl_point == rl_end;
+
+      /* If the line was history and alias expanded, then make that
+	 be one thing to undo. */
+      maybe_make_readline_line (new_line);
+      free (new_line);
+
+      /* If there is variable expansion to perform, do that as a separate
+	 operation to be undone. */
+
+#if 1
+      w = alloc_word_desc ();
+      w->word = savestring (rl_line_buffer);
+      w->flags = rl_explicit_arg ? (W_NOPROCSUB|W_NOCOMSUB) : 0;
+      expanded_string = expand_word (w, rl_explicit_arg ? Q_HERE_DOCUMENT : 0);
+      dispose_word (w);
+#else
+      new_line = savestring (rl_line_buffer);
+      expanded_string = expand_string (new_line, 0);
+      FREE (new_line);
+#endif
+
+      if (expanded_string == 0)
+	{
+	  new_line = (char *)xmalloc (1);
+	  new_line[0] = '\0';
+	}
+      else
+	{
+	  new_line = string_list (expanded_string);
+	  dispose_words (expanded_string);
+	}
+
+      maybe_make_readline_line (new_line);
+      free (new_line);
+
+      /* Place rl_point where we think it should go. */
+      if (at_end)
+	rl_point = rl_end;
+      else if (old_point < rl_end)
+	{
+	  rl_point = old_point;
+	  if (!whitespace (rl_line_buffer[rl_point]))
+	    rl_forward_word (1, 0);
+	}
+      return 0;
+    }
+  else
+    {
+      cleanup_expansion_error ();
+      return 1;
+    }
+}
+
+/* If FIGNORE is set, then don't match files with the given suffixes when
+   completing filenames.  If only one of the possibilities has an acceptable
+   suffix, delete the others, else just return and let the completer
+   signal an error.  It is called by the completer when real
+   completions are done on filenames by the completer's internal
+   function, not for completion lists (M-?) and not on "other"
+   completion types, such as hostnames or commands. */
+
+static struct ignorevar fignore =
+{
+  "FIGNORE",
+  (struct ign *)0,
+  0,
+  (char *)0,
+  (sh_iv_item_func_t *) 0,
+};
+
+static void
+_ignore_completion_names (names, name_func)
+     char **names;
+     sh_ignore_func_t *name_func;
+{
+  char **newnames;
+  int idx, nidx;
+  char **oldnames;
+  int oidx;
+
+  /* If there is only one completion, see if it is acceptable.  If it is
+     not, free it up.  In any case, short-circuit and return.  This is a
+     special case because names[0] is not the prefix of the list of names
+     if there is only one completion; it is the completion itself. */
+  if (names[1] == (char *)0)
+    {
+      if (force_fignore)
+	if ((*name_func) (names[0]) == 0)
+	  {
+	    free (names[0]);
+	    names[0] = (char *)NULL;
+	  }
+
+      return;
+    }
+
+  /* Allocate space for array to hold list of pointers to matching
+     filenames.  The pointers are copied back to NAMES when done. */
+  for (nidx = 1; names[nidx]; nidx++)
+    ;
+  newnames = strvec_create (nidx + 1);
+
+  if (force_fignore == 0)
+    {
+      oldnames = strvec_create (nidx - 1);
+      oidx = 0;
+    }
+
+  newnames[0] = names[0];
+  for (idx = nidx = 1; names[idx]; idx++)
+    {
+      if ((*name_func) (names[idx]))
+	newnames[nidx++] = names[idx];
+      else if (force_fignore == 0)
+	oldnames[oidx++] = names[idx];
+      else
+	free (names[idx]);
+    }
+
+  newnames[nidx] = (char *)NULL;
+
+  /* If none are acceptable then let the completer handle it. */
+  if (nidx == 1)
+    {
+      if (force_fignore)
+	{
+	  free (names[0]);
+	  names[0] = (char *)NULL;
+	}
+      else
+	free (oldnames);
+
+      free (newnames);
+      return;
+    }
+
+  if (force_fignore == 0)
+    {
+      while (oidx)
+	free (oldnames[--oidx]);
+      free (oldnames);
+    }
+
+  /* If only one is acceptable, copy it to names[0] and return. */
+  if (nidx == 2)
+    {
+      free (names[0]);
+      names[0] = newnames[1];
+      names[1] = (char *)NULL;
+      free (newnames);
+      return;
+    }
+
+  /* Copy the acceptable names back to NAMES, set the new array end,
+     and return. */
+  for (nidx = 1; newnames[nidx]; nidx++)
+    names[nidx] = newnames[nidx];
+  names[nidx] = (char *)NULL;
+  free (newnames);
+}
+
+static int
+name_is_acceptable (name)
+     const char *name;
+{
+  struct ign *p;
+  int nlen;
+
+  for (nlen = strlen (name), p = fignore.ignores; p->val; p++)
+    {
+      if (nlen > p->len && p->len > 0 && STREQ (p->val, &name[nlen - p->len]))
+	return (0);
+    }
+
+  return (1);
+}
+
+#if 0
+static int
+ignore_dot_names (name)
+     char *name;
+{
+  return (name[0] != '.');
+}
+#endif
+
+static int
+filename_completion_ignore (names)
+     char **names;
+{
+#if 0
+  if (glob_dot_filenames == 0)
+    _ignore_completion_names (names, ignore_dot_names);
+#endif
+
+  setup_ignore_patterns (&fignore);
+
+  if (fignore.num_ignores == 0)
+    return 0;
+
+  _ignore_completion_names (names, name_is_acceptable);
+
+  return 0;
+}
+
+/* Return 1 if NAME is a directory.  NAME undergoes tilde expansion. */
+static int
+test_for_directory (name)
+     const char *name;
+{
+  char *fn;
+  int r;
+
+  fn = bash_tilde_expand (name, 0);
+  r = file_isdir (fn);
+  free (fn);
+
+  return (r);
+}
+
+static int
+test_for_canon_directory (name)
+     const char *name;
+{
+  char *fn;
+  int r;
+
+  fn = (*name == '~') ? bash_tilde_expand (name, 0) : savestring (name);
+  bash_filename_stat_hook (&fn);
+  r = file_isdir (fn);
+  free (fn);
+
+  return (r);
+}
+
+/* Remove files from NAMES, leaving directories. */
+static int
+bash_ignore_filenames (names)
+     char **names;
+{
+  _ignore_completion_names (names, test_for_directory);
+  return 0;
+}
+
+static int
+bash_progcomp_ignore_filenames (names)
+     char **names;
+{
+  _ignore_completion_names (names, test_for_canon_directory);
+  return 0;
+}
+
+static int
+return_zero (name)
+     const char *name;
+{
+  return 0;
+}
+
+static int
+bash_ignore_everything (names)
+     char **names;
+{
+  _ignore_completion_names (names, return_zero);
+  return 0;
+}
+
+/* Replace a tilde-prefix in VAL with a `~', assuming the user typed it.  VAL
+   is an expanded filename.  DIRECTORY_PART is the tilde-prefix portion
+   of the un-tilde-expanded version of VAL (what the user typed). */
+static char *
+restore_tilde (val, directory_part)
+     char *val, *directory_part;
+{
+  int l, vl, dl2, xl;
+  char *dh2, *expdir, *ret, *v;
+
+  vl = strlen (val);
+
+  /* We need to duplicate the expansions readline performs on the directory
+     portion before passing it to our completion function. */
+  dh2 = directory_part ? bash_dequote_filename (directory_part, 0) : 0;
+  bash_directory_expansion (&dh2);
+  dl2 = strlen (dh2);
+
+  expdir = bash_tilde_expand (directory_part, 0);
+  xl = strlen (expdir);
+  if (*directory_part == '~' && STREQ (directory_part, expdir))
+    {
+      /* tilde expansion failed, so what should we return? we use what the
+	 user typed. */
+      v = mbschr (val, '/');
+      vl = STRLEN (v);
+      ret = (char *)xmalloc (xl + vl + 2);
+      strcpy (ret, directory_part);
+      if (v && *v)
+	strcpy (ret + xl, v);
+
+      free (dh2);
+      free (expdir);
+
+      return ret;
+    }
+  free (expdir);
+
+  /*
+     dh2 = unexpanded but dequoted tilde-prefix
+     dl2 = length of tilde-prefix
+     expdir = tilde-expanded tilde-prefix
+     xl = length of expanded tilde-prefix
+     l = length of remainder after tilde-prefix
+  */
+  l = (vl - xl) + 1;
+  if (l <= 0)
+    {
+      free (dh2);
+      return (savestring (val));		/* XXX - just punt */
+    }
+
+  ret = (char *)xmalloc (dl2 + 2 + l);
+  strcpy (ret, dh2);
+  strcpy (ret + dl2, val + xl);
+
+  free (dh2);
+  return (ret);
+}
+
+static char *
+maybe_restore_tilde (val, directory_part)
+     char *val, *directory_part;
+{
+  rl_icppfunc_t *save;
+  char *ret;
+
+  save = (dircomplete_expand == 0) ? save_directory_hook () : (rl_icppfunc_t *)0;
+  ret = restore_tilde (val, directory_part);
+  if (save)
+    restore_directory_hook (save);
+  return ret;
+}
+
+/* Simulate the expansions that will be performed by
+   rl_filename_completion_function.  This must be called with the address of
+   a pointer to malloc'd memory. */
+static void
+bash_directory_expansion (dirname)
+     char **dirname;
+{
+  char *d, *nd;
+
+  d = savestring (*dirname);
+
+  if ((rl_directory_rewrite_hook) && (*rl_directory_rewrite_hook) (&d))
+    {
+      free (*dirname);
+      *dirname = d;
+    }
+  else if (rl_directory_completion_hook && (*rl_directory_completion_hook) (&d))
+    {
+      free (*dirname);
+      *dirname = d;
+    }
+  else if (rl_completion_found_quote)
+    {
+      nd = bash_dequote_filename (d, rl_completion_quote_character);
+      free (*dirname);
+      free (d);
+      *dirname = nd;
+    }
+}
+
+/* If necessary, rewrite directory entry */
+static char *
+bash_filename_rewrite_hook (fname, fnlen)
+     char *fname;
+     int fnlen;
+{
+  char *conv;
+
+  conv = fnx_fromfs (fname, fnlen);
+  if (conv != fname)
+    conv = savestring (conv);
+  return conv;
+}
+
+/* Functions to save and restore the appropriate directory hook */
+/* This is not static so the shopt code can call it */
+void
+set_directory_hook ()
+{
+  if (dircomplete_expand)
+    {
+      rl_directory_completion_hook = bash_directory_completion_hook;
+      rl_directory_rewrite_hook = (rl_icppfunc_t *)0;
+    }
+  else
+    {
+      rl_directory_rewrite_hook = bash_directory_completion_hook;
+      rl_directory_completion_hook = (rl_icppfunc_t *)0;
+    }
+}
+
+static rl_icppfunc_t *
+save_directory_hook ()
+{
+  rl_icppfunc_t *ret;
+
+  if (dircomplete_expand)
+    {
+      ret = rl_directory_completion_hook;
+      rl_directory_completion_hook = (rl_icppfunc_t *)NULL;
+    }
+  else
+    {
+      ret = rl_directory_rewrite_hook;
+      rl_directory_rewrite_hook = (rl_icppfunc_t *)NULL;
+    }
+
+  return ret;
+}
+
+static void
+restore_directory_hook (hookf)
+     rl_icppfunc_t *hookf;
+{
+  if (dircomplete_expand)
+    rl_directory_completion_hook = hookf;
+  else
+    rl_directory_rewrite_hook = hookf;
+}
+
+/* Check whether not DIRNAME, with any trailing slash removed, exists.  If
+   SHOULD_DEQUOTE is non-zero, we dequote the directory name first. */
+static int
+directory_exists (dirname, should_dequote)
+     const char *dirname;
+     int should_dequote;
+{
+  char *new_dirname;
+  int dirlen, r;
+  struct stat sb;
+
+  /* We save the string and chop the trailing slash because stat/lstat behave
+     inconsistently if one is present. */
+  new_dirname = should_dequote ? bash_dequote_filename ((char *)dirname, rl_completion_quote_character) : savestring (dirname);
+  dirlen = STRLEN (new_dirname);
+  if (new_dirname[dirlen - 1] == '/')
+    new_dirname[dirlen - 1] = '\0';
+#if defined (HAVE_LSTAT)
+  r = lstat (new_dirname, &sb) == 0;
+#else
+  r = stat (new_dirname, &sb) == 0;
+#endif
+  free (new_dirname);
+  return (r);
+}
+  
+/* Expand a filename before the readline completion code passes it to stat(2).
+   The filename will already have had tilde expansion performed. */
+static int
+bash_filename_stat_hook (dirname)
+     char **dirname;
+{
+  char *local_dirname, *new_dirname, *t;
+  int should_expand_dirname, return_value;
+  int global_nounset;
+  WORD_LIST *wl;
+
+  local_dirname = *dirname;
+  should_expand_dirname = return_value = 0;
+  if (t = mbschr (local_dirname, '$'))
+    should_expand_dirname = '$';
+  else if (t = mbschr (local_dirname, '`'))	/* XXX */
+    should_expand_dirname = '`';
+
+  if (should_expand_dirname && directory_exists (local_dirname, 0))
+    should_expand_dirname = 0;
+  
+  if (should_expand_dirname)  
+    {
+      new_dirname = savestring (local_dirname);
+      /* no error messages, and expand_prompt_string doesn't longjmp so we don't
+	 have to worry about restoring this setting. */
+      global_nounset = unbound_vars_is_error;
+      unbound_vars_is_error = 0;
+      wl = expand_prompt_string (new_dirname, 0, W_NOCOMSUB|W_NOPROCSUB|W_COMPLETE);	/* does the right thing */
+      unbound_vars_is_error = global_nounset;
+      if (wl)
+	{
+	  free (new_dirname);
+	  new_dirname = string_list (wl);
+	  /* Tell the completer we actually expanded something and change
+	     *dirname only if we expanded to something non-null -- stat
+	     behaves unpredictably when passed null or empty strings */
+	  if (new_dirname && *new_dirname)
+	    {
+	      free (local_dirname);	/* XXX */
+	      local_dirname = *dirname = new_dirname;
+	      return_value = STREQ (local_dirname, *dirname) == 0;
+	    }
+	  else
+	    free (new_dirname);
+	  dispose_words (wl);
+	}
+      else
+	free (new_dirname);
+    }	
+
+  /* This is very similar to the code in bash_directory_completion_hook below,
+     but without spelling correction and not worrying about whether or not
+     we change relative pathnames. */
+  if (no_symbolic_links == 0 && (local_dirname[0] != '.' || local_dirname[1]))
+    {
+      char *temp1, *temp2;
+
+      t = get_working_directory ("symlink-hook");
+      temp1 = make_absolute (local_dirname, t);
+      free (t);
+      temp2 = sh_canonpath (temp1, PATH_CHECKDOTDOT|PATH_CHECKEXISTS);
+
+      /* If we can't canonicalize, bail. */
+      if (temp2 == 0)
+	{
+	  free (temp1);
+	  return return_value;
+	}
+
+      free (local_dirname);
+      *dirname = temp2;
+      free (temp1);
+    }
+
+  return (return_value);
+}
+
+/* Handle symbolic link references and other directory name
+   expansions while hacking completion.  This should return 1 if it modifies
+   the DIRNAME argument, 0 otherwise.  It should make sure not to modify
+   DIRNAME if it returns 0. */
+static int
+bash_directory_completion_hook (dirname)
+     char **dirname;
+{
+  char *local_dirname, *new_dirname, *t;
+  int return_value, should_expand_dirname, nextch, closer;
+  WORD_LIST *wl;
+
+  return_value = should_expand_dirname = nextch = closer = 0;
+  local_dirname = *dirname;
+
+  if (t = mbschr (local_dirname, '$'))
+    {
+      should_expand_dirname = '$';
+      nextch = t[1];
+      /* Deliberately does not handle the deprecated $[...] arithmetic
+	 expansion syntax */
+      if (nextch == '(')
+	closer = ')';
+      else if (nextch == '{')
+	closer = '}';
+      else
+	nextch = 0;
+
+      if (closer)
+	{
+	  int p;
+	  char delims[2];
+
+	  delims[0] = closer; delims[1] = 0;
+	  p = skip_to_delim (t, 1, delims, SD_NOJMP|SD_COMPLETE);
+	  if (t[p] != closer)
+	    should_expand_dirname = 0;
+	}
+    }
+  else if (local_dirname[0] == '~')
+    should_expand_dirname = '~';
+  else
+    {
+      t = mbschr (local_dirname, '`');
+      if (t && unclosed_pair (local_dirname, strlen (local_dirname), "`") == 0)
+	should_expand_dirname = '`';
+    }
+
+  if (should_expand_dirname && directory_exists (local_dirname, 1))
+    should_expand_dirname = 0;
+
+  if (should_expand_dirname)  
+    {
+      new_dirname = savestring (local_dirname);
+      wl = expand_prompt_string (new_dirname, 0, W_NOCOMSUB|W_NOPROCSUB|W_COMPLETE);	/* does the right thing */
+      if (wl)
+	{
+	  *dirname = string_list (wl);
+	  /* Tell the completer to replace the directory name only if we
+	     actually expanded something. */
+	  return_value = STREQ (local_dirname, *dirname) == 0;
+	  free (local_dirname);
+	  free (new_dirname);
+	  dispose_words (wl);
+	  local_dirname = *dirname;
+	  /* XXX - change rl_filename_quote_characters here based on
+	     should_expand_dirname/nextch/closer.  This is the only place
+	     custom_filename_quote_characters is modified. */
+	  if (rl_filename_quote_characters && *rl_filename_quote_characters)
+	    {
+	      int i, j, c;
+	      i = strlen (default_filename_quote_characters);
+	      custom_filename_quote_characters = xrealloc (custom_filename_quote_characters, i+1);
+	      for (i = j = 0; c = default_filename_quote_characters[i]; i++)
+		{
+		  if (c == should_expand_dirname || c == nextch || c == closer)
+		    continue;
+		  custom_filename_quote_characters[j++] = c;
+		}
+	      custom_filename_quote_characters[j] = '\0';
+	      rl_filename_quote_characters = custom_filename_quote_characters;
+	      set_filename_bstab (rl_filename_quote_characters);
+	    }
+	}
+      else
+	{
+	  free (new_dirname);
+	  free (local_dirname);
+	  *dirname = (char *)xmalloc (1);
+	  **dirname = '\0';
+	  return 1;
+	}
+    }
+  else 
+    {
+      /* Dequote the filename even if we don't expand it. */
+      new_dirname = bash_dequote_filename (local_dirname, rl_completion_quote_character);
+      return_value = STREQ (local_dirname, new_dirname) == 0;
+      free (local_dirname);
+      local_dirname = *dirname = new_dirname;
+    }
+
+  /* no_symbolic_links == 0 -> use (default) logical view of the file system.
+     local_dirname[0] == '.' && local_dirname[1] == '/' means files in the
+     current directory (./).
+     local_dirname[0] == '.' && local_dirname[1] == 0 means relative pathnames
+     in the current directory (e.g., lib/sh).
+     XXX - should we do spelling correction on these? */
+
+  /* This is test as it was in bash-4.2: skip relative pathnames in current
+     directory.  Change test to
+      (local_dirname[0] != '.' || (local_dirname[1] && local_dirname[1] != '/'))
+     if we want to skip paths beginning with ./ also. */
+  if (no_symbolic_links == 0 && (local_dirname[0] != '.' || local_dirname[1]))
+    {
+      char *temp1, *temp2;
+      int len1, len2;
+
+      /* If we have a relative path
+      		(local_dirname[0] != '/' && local_dirname[0] != '.')
+	 that is canonical after appending it to the current directory, then
+	 	temp1 = temp2+'/'
+	 That is,
+	 	strcmp (temp1, temp2) == 0
+	 after adding a slash to temp2 below.  It should be safe to not
+	 change those.
+      */
+      t = get_working_directory ("symlink-hook");
+      temp1 = make_absolute (local_dirname, t);
+      free (t);
+      temp2 = sh_canonpath (temp1, PATH_CHECKDOTDOT|PATH_CHECKEXISTS);
+
+      /* Try spelling correction if initial canonicalization fails.  Make
+	 sure we are set to replace the directory name with the results so
+	 subsequent directory checks don't fail. */
+      if (temp2 == 0 && dircomplete_spelling && dircomplete_expand)
+	{
+	  temp2 = dirspell (temp1);
+	  if (temp2)
+	    {
+	      free (temp1);
+	      temp1 = temp2;
+	      temp2 = sh_canonpath (temp1, PATH_CHECKDOTDOT|PATH_CHECKEXISTS);
+	      return_value |= temp2 != 0;
+	    }
+	}
+      /* If we can't canonicalize, bail. */
+      if (temp2 == 0)
+	{
+	  free (temp1);
+	  return return_value;
+	}
+      len1 = strlen (temp1);
+      if (temp1[len1 - 1] == '/')
+	{
+	  len2 = strlen (temp2);
+	  if (len2 > 2)		/* don't append `/' to `/' or `//' */
+	    {
+	      temp2 = (char *)xrealloc (temp2, len2 + 2);
+	      temp2[len2] = '/';
+	      temp2[len2 + 1] = '\0';
+	    }
+	}
+
+      /* dircomplete_expand_relpath == 0 means we want to leave relative
+	 pathnames that are unchanged by canonicalization alone.
+	 *local_dirname != '/' && *local_dirname != '.' == relative pathname
+	 (consistent with general.c:absolute_pathname())
+	 temp1 == temp2 (after appending a slash to temp2) means the pathname
+	 is not changed by canonicalization as described above. */
+      if (dircomplete_expand_relpath || ((local_dirname[0] != '/' && local_dirname[0] != '.') && STREQ (temp1, temp2) == 0))
+	return_value |= STREQ (local_dirname, temp2) == 0;
+      free (local_dirname);
+      *dirname = temp2;
+      free (temp1);
+    }
+
+  return (return_value);
+}
+
+static char **history_completion_array = (char **)NULL;
+static int harry_size;
+static int harry_len;
+
+static void
+build_history_completion_array ()
+{
+  register int i, j;
+  HIST_ENTRY **hlist;
+  char **tokens;
+
+  /* First, clear out the current dynamic history completion list. */
+  if (harry_size)
+    {
+      strvec_dispose (history_completion_array);
+      history_completion_array = (char **)NULL;
+      harry_size = 0;
+      harry_len = 0;
+    }
+
+  /* Next, grovel each line of history, making each shell-sized token
+     a separate entry in the history_completion_array. */
+  hlist = history_list ();
+
+  if (hlist)
+    {
+      for (i = 0; hlist[i]; i++)
+	;
+      for ( --i; i >= 0; i--)
+	{
+	  /* Separate each token, and place into an array. */
+	  tokens = history_tokenize (hlist[i]->line);
+
+	  for (j = 0; tokens && tokens[j]; j++)
+	    {
+	      if (harry_len + 2 > harry_size)
+	        history_completion_array = strvec_resize (history_completion_array, harry_size += 10);
+
+	      history_completion_array[harry_len++] = tokens[j];
+	      history_completion_array[harry_len] = (char *)NULL;
+	    }
+	  free (tokens);
+	}
+
+      /* Sort the complete list of tokens. */
+      if (dabbrev_expand_active == 0)
+        qsort (history_completion_array, harry_len, sizeof (char *), (QSFUNC *)strvec_strcmp);
+    }
+}
+
+static char *
+history_completion_generator (hint_text, state)
+     const char *hint_text;
+     int state;
+{
+  static int local_index, len;
+  static const char *text;
+
+  /* If this is the first call to the generator, then initialize the
+     list of strings to complete over. */
+  if (state == 0)
+    {
+      if (dabbrev_expand_active)	/* This is kind of messy */
+	rl_completion_suppress_append = 1;
+      local_index = 0;
+      build_history_completion_array ();
+      text = hint_text;
+      len = strlen (text);
+    }
+
+  while (history_completion_array && history_completion_array[local_index])
+    {
+      /* XXX - should this use completion-ignore-case? */
+      if (strncmp (text, history_completion_array[local_index++], len) == 0)
+	return (savestring (history_completion_array[local_index - 1]));
+    }
+  return ((char *)NULL);
+}
+
+static int
+dynamic_complete_history (count, key)
+     int count, key;
+{
+  int r;
+  rl_compentry_func_t *orig_func;
+  rl_completion_func_t *orig_attempt_func;
+  rl_compignore_func_t *orig_ignore_func;
+
+  orig_func = rl_completion_entry_function;
+  orig_attempt_func = rl_attempted_completion_function;
+  orig_ignore_func = rl_ignore_some_completions_function;
+
+  rl_completion_entry_function = history_completion_generator;
+  rl_attempted_completion_function = (rl_completion_func_t *)NULL;
+  rl_ignore_some_completions_function = filename_completion_ignore;
+
+  /* XXX - use rl_completion_mode here? */
+  if (rl_last_func == dynamic_complete_history)
+    r = rl_complete_internal ('?');
+  else
+    r = rl_complete_internal (TAB);
+
+  rl_completion_entry_function = orig_func;
+  rl_attempted_completion_function = orig_attempt_func;
+  rl_ignore_some_completions_function = orig_ignore_func;
+
+  return r;
+}
+
+static int
+bash_dabbrev_expand (count, key)
+     int count, key;
+{
+  int r, orig_suppress, orig_sort;
+  rl_compentry_func_t *orig_func;
+  rl_completion_func_t *orig_attempt_func;
+  rl_compignore_func_t *orig_ignore_func;
+
+  orig_func = rl_menu_completion_entry_function;
+  orig_attempt_func = rl_attempted_completion_function;
+  orig_ignore_func = rl_ignore_some_completions_function;
+  orig_suppress = rl_completion_suppress_append;
+  orig_sort = rl_sort_completion_matches;
+
+  rl_menu_completion_entry_function = history_completion_generator;
+  rl_attempted_completion_function = (rl_completion_func_t *)NULL;
+  rl_ignore_some_completions_function = filename_completion_ignore;
+  rl_filename_completion_desired = 0;
+  rl_completion_suppress_append = 1;
+  rl_sort_completion_matches = 0;
+
+  /* XXX - use rl_completion_mode here? */
+  dabbrev_expand_active = 1;
+  if (rl_last_func == bash_dabbrev_expand)
+    rl_last_func = rl_menu_complete;
+  r = rl_menu_complete (count, key);
+  dabbrev_expand_active = 0;
+
+  rl_last_func = bash_dabbrev_expand;
+  rl_menu_completion_entry_function = orig_func;
+  rl_attempted_completion_function = orig_attempt_func;
+  rl_ignore_some_completions_function = orig_ignore_func;
+  rl_completion_suppress_append = orig_suppress;
+  rl_sort_completion_matches = orig_sort;
+
+  return r;
+}
+
+#if defined (SPECIFIC_COMPLETION_FUNCTIONS)
+static int
+bash_complete_username (ignore, ignore2)
+     int ignore, ignore2;
+{
+  return bash_complete_username_internal (rl_completion_mode (bash_complete_username));
+}
+
+static int
+bash_possible_username_completions (ignore, ignore2)
+     int ignore, ignore2;
+{
+  return bash_complete_username_internal ('?');
+}
+
+static int
+bash_complete_username_internal (what_to_do)
+     int what_to_do;
+{
+  return bash_specific_completion (what_to_do, rl_username_completion_function);
+}
+
+static int
+bash_complete_filename (ignore, ignore2)
+     int ignore, ignore2;
+{
+  return bash_complete_filename_internal (rl_completion_mode (bash_complete_filename));
+}
+
+static int
+bash_possible_filename_completions (ignore, ignore2)
+     int ignore, ignore2;
+{
+  return bash_complete_filename_internal ('?');
+}
+
+static int
+bash_complete_filename_internal (what_to_do)
+     int what_to_do;
+{
+  rl_compentry_func_t *orig_func;
+  rl_completion_func_t *orig_attempt_func;
+  rl_icppfunc_t *orig_dir_func;
+  rl_compignore_func_t *orig_ignore_func;
+  /*const*/ char *orig_rl_completer_word_break_characters;
+  int r;
+
+  orig_func = rl_completion_entry_function;
+  orig_attempt_func = rl_attempted_completion_function;
+  orig_ignore_func = rl_ignore_some_completions_function;
+  orig_rl_completer_word_break_characters = rl_completer_word_break_characters;
+
+  orig_dir_func = save_directory_hook ();
+
+  rl_completion_entry_function = rl_filename_completion_function;
+  rl_attempted_completion_function = (rl_completion_func_t *)NULL;
+  rl_ignore_some_completions_function = filename_completion_ignore;
+  rl_completer_word_break_characters = " \t\n\"\'";
+
+  r = rl_complete_internal (what_to_do);
+
+  rl_completion_entry_function = orig_func;
+  rl_attempted_completion_function = orig_attempt_func;
+  rl_ignore_some_completions_function = orig_ignore_func;
+  rl_completer_word_break_characters = orig_rl_completer_word_break_characters;
+
+  restore_directory_hook (orig_dir_func);
+
+  return r;
+}
+
+static int
+bash_complete_hostname (ignore, ignore2)
+     int ignore, ignore2;
+{
+  return bash_complete_hostname_internal (rl_completion_mode (bash_complete_hostname));
+}
+
+static int
+bash_possible_hostname_completions (ignore, ignore2)
+     int ignore, ignore2;
+{
+  return bash_complete_hostname_internal ('?');
+}
+
+static int
+bash_complete_variable (ignore, ignore2)
+     int ignore, ignore2;
+{
+  return bash_complete_variable_internal (rl_completion_mode (bash_complete_variable));
+}
+
+static int
+bash_possible_variable_completions (ignore, ignore2)
+     int ignore, ignore2;
+{
+  return bash_complete_variable_internal ('?');
+}
+
+static int
+bash_complete_command (ignore, ignore2)
+     int ignore, ignore2;
+{
+  return bash_complete_command_internal (rl_completion_mode (bash_complete_command));
+}
+
+static int
+bash_possible_command_completions (ignore, ignore2)
+     int ignore, ignore2;
+{
+  return bash_complete_command_internal ('?');
+}
+
+static int
+bash_complete_hostname_internal (what_to_do)
+     int what_to_do;
+{
+  return bash_specific_completion (what_to_do, hostname_completion_function);
+}
+
+static int
+bash_complete_variable_internal (what_to_do)
+     int what_to_do;
+{
+  return bash_specific_completion (what_to_do, variable_completion_function);
+}
+
+static int
+bash_complete_command_internal (what_to_do)
+     int what_to_do;
+{
+  return bash_specific_completion (what_to_do, command_word_completion_function);
+}
+
+static int
+completion_glob_pattern (string)
+     char *string;
+{
+  return (glob_pattern_p (string) == 1);
+}
+
+static char *globtext;
+static char *globorig;
+
+static char *
+glob_complete_word (text, state)
+     const char *text;
+     int state;
+{
+  static char **matches = (char **)NULL;
+  static int ind;
+  int glen;
+  char *ret, *ttext;
+
+  if (state == 0)
+    {
+      rl_filename_completion_desired = 1;
+      FREE (matches);
+      if (globorig != globtext)
+	FREE (globorig);
+      FREE (globtext);
+
+      ttext = bash_tilde_expand (text, 0);
+
+      if (rl_explicit_arg)
+	{
+	  globorig = savestring (ttext);
+	  glen = strlen (ttext);
+	  globtext = (char *)xmalloc (glen + 2);
+	  strcpy (globtext, ttext);
+	  globtext[glen] = '*';
+	  globtext[glen+1] = '\0';
+	}
+      else
+        globtext = globorig = savestring (ttext);
+
+      if (ttext != text)
+	free (ttext);
+
+      matches = shell_glob_filename (globtext, 0);
+      if (GLOB_FAILED (matches))
+	matches = (char **)NULL;
+      ind = 0;
+    }
+
+  ret = matches ? matches[ind] : (char *)NULL;
+  ind++;
+  return ret;
+}
+
+static int
+bash_glob_completion_internal (what_to_do)
+     int what_to_do;
+{
+  return bash_specific_completion (what_to_do, glob_complete_word);
+}
+
+/* A special quoting function so we don't end up quoting globbing characters
+   in the word if there are no matches or multiple matches. */
+static char *
+bash_glob_quote_filename (s, rtype, qcp)
+     char *s;
+     int rtype;
+     char *qcp;
+{
+  if (globorig && qcp && *qcp == '\0' && STREQ (s, globorig))
+    return (savestring (s));
+  else
+    return (bash_quote_filename (s, rtype, qcp));
+}
+
+static int
+bash_glob_complete_word (count, key)
+     int count, key;
+{
+  int r;
+  rl_quote_func_t *orig_quoting_function;
+
+  if (rl_editing_mode == EMACS_EDITING_MODE)
+    rl_explicit_arg = 1;	/* force `*' append */
+  orig_quoting_function = rl_filename_quoting_function;
+  rl_filename_quoting_function = bash_glob_quote_filename;
+  
+  r = bash_glob_completion_internal (rl_completion_mode (bash_glob_complete_word));
+
+  rl_filename_quoting_function = orig_quoting_function;
+  return r;
+}
+
+static int
+bash_glob_expand_word (count, key)
+     int count, key;
+{
+  return bash_glob_completion_internal ('*');
+}
+
+static int
+bash_glob_list_expansions (count, key)
+     int count, key;
+{
+  return bash_glob_completion_internal ('?');
+}
+
+static int
+bash_specific_completion (what_to_do, generator)
+     int what_to_do;
+     rl_compentry_func_t *generator;
+{
+  rl_compentry_func_t *orig_func;
+  rl_completion_func_t *orig_attempt_func;
+  rl_compignore_func_t *orig_ignore_func;
+  int r;
+
+  orig_func = rl_completion_entry_function;
+  orig_attempt_func = rl_attempted_completion_function;
+  orig_ignore_func = rl_ignore_some_completions_function;
+  rl_completion_entry_function = generator;
+  rl_attempted_completion_function = NULL;
+  rl_ignore_some_completions_function = orig_ignore_func;
+
+  r = rl_complete_internal (what_to_do);
+
+  rl_completion_entry_function = orig_func;
+  rl_attempted_completion_function = orig_attempt_func;
+  rl_ignore_some_completions_function = orig_ignore_func;
+
+  return r;
+}
+
+#endif	/* SPECIFIC_COMPLETION_FUNCTIONS */
+
+#if defined (VI_MODE)
+/* Completion, from vi mode's point of view.  This is a modified version of
+   rl_vi_complete which uses the bash globbing code to implement what POSIX
+   specifies, which is to append a `*' and attempt filename generation (which
+   has the side effect of expanding any globbing characters in the word). */
+static int
+bash_vi_complete (count, key)
+     int count, key;
+{
+#if defined (SPECIFIC_COMPLETION_FUNCTIONS)
+  int p, r;
+  char *t;
+
+  if ((rl_point < rl_end) && (!whitespace (rl_line_buffer[rl_point])))
+    {
+      if (!whitespace (rl_line_buffer[rl_point + 1]))
+	rl_vi_end_word (1, 'E');
+      rl_point++;
+    }
+
+  /* Find boundaries of current word, according to vi definition of a
+     `bigword'. */
+  t = 0;
+  if (rl_point > 0)
+    {
+      p = rl_point;
+      rl_vi_bWord (1, 'B');
+      r = rl_point;
+      rl_point = p;
+      p = r;
+
+      t = substring (rl_line_buffer, p, rl_point);
+    }      
+
+  if (t && completion_glob_pattern (t) == 0)
+    rl_explicit_arg = 1;	/* XXX - force glob_complete_word to append `*' */
+  FREE (t);
+
+  if (key == '*')	/* Expansion and replacement. */
+    r = bash_glob_expand_word (count, key);
+  else if (key == '=')	/* List possible completions. */
+    r = bash_glob_list_expansions (count, key);
+  else if (key == '\\')	/* Standard completion */
+    r = bash_glob_complete_word (count, key);
+  else
+    r = rl_complete (0, key);
+
+  if (key == '*' || key == '\\')
+    rl_vi_start_inserting (key, 1, 1);
+
+  return (r);
+#else
+  return rl_vi_complete (count, key);
+#endif /* !SPECIFIC_COMPLETION_FUNCTIONS */
+}
+#endif /* VI_MODE */
+
+/* Filename quoting for completion. */
+/* A function to strip unquoted quote characters (single quotes, double
+   quotes, and backslashes).  It allows single quotes to appear
+   within double quotes, and vice versa.  It should be smarter. */
+static char *
+bash_dequote_filename (text, quote_char)
+     char *text;
+     int quote_char;
+{
+  char *ret, *p, *r;
+  int l, quoted;
+
+  l = strlen (text);
+  ret = (char *)xmalloc (l + 1);
+  for (quoted = quote_char, p = text, r = ret; p && *p; p++)
+    {
+      /* Allow backslash-escaped characters to pass through unscathed. */
+      if (*p == '\\')
+	{
+	  /* Backslashes are preserved within single quotes. */
+	  if (quoted == '\'')
+	    *r++ = *p;
+	  /* Backslashes are preserved within double quotes unless the
+	     character is one that is defined to be escaped */
+	  else if (quoted == '"' && ((sh_syntaxtab[(unsigned char)p[1]] & CBSDQUOTE) == 0))
+	    *r++ = *p;
+
+	  *r++ = *++p;
+	  if (*p == '\0')
+	    return ret;		/* XXX - was break; */
+	  continue;
+	}
+      /* Close quote. */
+      if (quoted && *p == quoted)
+	{
+	  quoted = 0;
+	  continue;
+	}
+      /* Open quote. */
+      if (quoted == 0 && (*p == '\'' || *p == '"'))
+	{
+	  quoted = *p;
+	  continue;
+	}
+      *r++ = *p;
+    }
+  *r = '\0';
+  return ret;
+}
+
+/* Quote characters that the readline completion code would treat as
+   word break characters with backslashes.  Pass backslash-quoted
+   characters through without examination. */
+static char *
+quote_word_break_chars (text)
+     char *text;
+{
+  char *ret, *r, *s;
+  int l;
+
+  l = strlen (text);
+  ret = (char *)xmalloc ((2 * l) + 1);
+  for (s = text, r = ret; *s; s++)
+    {
+      /* Pass backslash-quoted characters through, including the backslash. */
+      if (*s == '\\')
+	{
+	  *r++ = '\\';
+	  *r++ = *++s;
+	  if (*s == '\0')
+	    break;
+	  continue;
+	}
+      /* OK, we have an unquoted character.  Check its presence in
+	 rl_completer_word_break_characters. */
+      if (mbschr (rl_completer_word_break_characters, *s))
+	*r++ = '\\';
+      /* XXX -- check for standalone tildes here and backslash-quote them */
+      if (s == text && *s == '~' && file_exists (text))
+        *r++ = '\\';
+      *r++ = *s;
+    }
+  *r = '\0';
+  return ret;
+}
+
+/* Use characters in STRING to populate the table of characters that should
+   be backslash-quoted.  The table will be used for sh_backslash_quote from
+   this file. */
+static void
+set_filename_bstab (string)
+     const char *string;
+{
+  const char *s;
+
+  memset (filename_bstab, 0, sizeof (filename_bstab));
+  for (s = string; s && *s; s++)
+    filename_bstab[(unsigned char)*s] = 1;
+}
+
+/* Quote a filename using double quotes, single quotes, or backslashes
+   depending on the value of completion_quoting_style.  If we're
+   completing using backslashes, we need to quote some additional
+   characters (those that readline treats as word breaks), so we call
+   quote_word_break_chars on the result.  This returns newly-allocated
+   memory. */
+static char *
+bash_quote_filename (s, rtype, qcp)
+     char *s;
+     int rtype;
+     char *qcp;
+{
+  char *rtext, *mtext, *ret;
+  int rlen, cs;
+
+  rtext = (char *)NULL;
+
+  /* If RTYPE == MULT_MATCH, it means that there is
+     more than one match.  In this case, we do not add
+     the closing quote or attempt to perform tilde
+     expansion.  If RTYPE == SINGLE_MATCH, we try
+     to perform tilde expansion, because single and double
+     quotes inhibit tilde expansion by the shell. */
+
+  cs = completion_quoting_style;
+  /* Might need to modify the default completion style based on *qcp,
+     since it's set to any user-provided opening quote.  We also change
+     to single-quoting if there is no user-provided opening quote and
+     the word being completed contains newlines, since those are not
+     quoted correctly using backslashes (a backslash-newline pair is
+     special to the shell parser). */
+  if (*qcp == '\0' && cs == COMPLETE_BSQUOTE && mbschr (s, '\n'))
+    cs = COMPLETE_SQUOTE;
+  else if (*qcp == '"')
+    cs = COMPLETE_DQUOTE;
+  else if (*qcp == '\'')
+    cs = COMPLETE_SQUOTE;
+#if defined (BANG_HISTORY)
+  else if (*qcp == '\0' && history_expansion && cs == COMPLETE_DQUOTE &&
+	   history_expansion_inhibited == 0 && mbschr (s, '!'))
+    cs = COMPLETE_BSQUOTE;
+
+  if (*qcp == '"' && history_expansion && cs == COMPLETE_DQUOTE &&
+	history_expansion_inhibited == 0 && mbschr (s, '!'))
+    {
+      cs = COMPLETE_BSQUOTE;
+      *qcp = '\0';
+    }
+#endif
+
+  /* Don't tilde-expand backslash-quoted filenames, since only single and
+     double quotes inhibit tilde expansion. */
+  mtext = s;
+  if (mtext[0] == '~' && rtype == SINGLE_MATCH && cs != COMPLETE_BSQUOTE)
+    mtext = bash_tilde_expand (s, 0);
+
+  switch (cs)
+    {
+    case COMPLETE_DQUOTE:
+      rtext = sh_double_quote (mtext);
+      break;
+    case COMPLETE_SQUOTE:
+      rtext = sh_single_quote (mtext);
+      break;
+    case COMPLETE_BSQUOTE:
+      rtext = sh_backslash_quote (mtext, complete_fullquote ? 0 : filename_bstab, 0);
+      break;
+    }
+
+  if (mtext != s)
+    free (mtext);
+
+  /* We may need to quote additional characters: those that readline treats
+     as word breaks that are not quoted by backslash_quote. */
+  if (rtext && cs == COMPLETE_BSQUOTE)
+    {
+      mtext = quote_word_break_chars (rtext);
+      free (rtext);
+      rtext = mtext;
+    }
+
+  /* Leave the opening quote intact.  The readline completion code takes
+     care of avoiding doubled opening quotes. */
+  if (rtext)
+    {
+      rlen = strlen (rtext);
+      ret = (char *)xmalloc (rlen + 1);
+      strcpy (ret, rtext);
+    }
+  else
+    {
+      ret = (char *)xmalloc (rlen = 1);
+      ret[0] = '\0';
+    }
+
+  /* If there are multiple matches, cut off the closing quote. */
+  if (rtype == MULT_MATCH && cs != COMPLETE_BSQUOTE)
+    ret[rlen - 1] = '\0';
+  free (rtext);
+  return ret;
+}
+
+/* Support for binding readline key sequences to Unix commands. Each editing
+   mode has a separate Unix command keymap. */
+
+static Keymap emacs_std_cmd_xmap;
+#if defined (VI_MODE)
+static Keymap vi_insert_cmd_xmap;
+static Keymap vi_movement_cmd_xmap;
+#endif
+
+#ifdef _MINIX
+static void
+#else
+static int
+#endif
+putx(c)
+     int c;
+{
+  int x;
+  x = putc (c, rl_outstream);
+#ifndef _MINIX
+  return x;
+#endif
+}
+
+static int
+readline_get_char_offset (ind)
+     int ind;
+{
+  int r, old_ch;
+
+  r = ind;
+#if defined (HANDLE_MULTIBYTE)
+  if (locale_mb_cur_max > 1)
+    {
+      old_ch = rl_line_buffer[ind];
+      rl_line_buffer[ind] = '\0';
+      r = MB_STRLEN (rl_line_buffer);
+      rl_line_buffer[ind] = old_ch;
+    }
+#endif
+  return r;
+}
+
+static void
+readline_set_char_offset (ind, varp)
+     int ind;
+     int *varp;
+{
+  int i;
+
+  i = ind;
+
+#if defined (HANDLE_MULTIBYTE)
+  if (i > 0 && locale_mb_cur_max > 1)
+    i = _rl_find_next_mbchar (rl_line_buffer, 0, i, 0);		/* XXX */
+#endif
+  if (i != *varp)
+    {
+      if (i > rl_end)
+	i = rl_end;
+      else if (i < 0)
+	i = 0;
+      *varp = i;
+    }
+}
+
+int
+bash_execute_unix_command (count, key)
+     int count;	/* ignored */
+     int key;
+{
+  int type;
+  register int i, r;
+  intmax_t mi;
+  sh_parser_state_t ps;
+  char *cmd, *value, *ce, old_ch;
+  SHELL_VAR *v;
+  char ibuf[INT_STRLEN_BOUND(int) + 1];
+  Keymap cmd_xmap;
+
+  /* First, we need to find the right command to execute.  This is tricky,
+     because we might have already indirected into another keymap, so we
+     have to walk cmd_xmap using the entire key sequence. */
+  cmd_xmap = get_cmd_xmap_from_keymap (rl_get_keymap ());
+  cmd = (char *)rl_function_of_keyseq_len (rl_executing_keyseq, rl_key_sequence_length, cmd_xmap, &type);
+
+  if (type == ISKMAP && (type = ((Keymap) cmd)[ANYOTHERKEY].type) == ISMACR)
+    cmd = (char*)((Keymap) cmd)[ANYOTHERKEY].function;
+
+  if (cmd == 0 || type != ISMACR)
+    {
+      rl_crlf ();
+      internal_error (_("bash_execute_unix_command: cannot find keymap for command"));
+      rl_forced_update_display ();
+      return 1;
+    }
+
+  ce = rl_get_termcap ("ce");
+  if (ce)	/* clear current line */
+    {
+      rl_clear_visible_line ();
+      fflush (rl_outstream);
+    }
+  else
+    rl_crlf ();	/* move to a new line */
+
+  v = bind_variable ("READLINE_LINE", rl_line_buffer, 0);
+  if (v)
+    VSETATTR (v, att_exported);
+
+  i = readline_get_char_offset (rl_point);
+  value = inttostr (i, ibuf, sizeof (ibuf));
+  v = bind_int_variable ("READLINE_POINT", value, 0);
+  if (v)
+    VSETATTR (v, att_exported);
+
+  i = readline_get_char_offset (rl_mark);
+  value = inttostr (i, ibuf, sizeof (ibuf));
+  v = bind_int_variable ("READLINE_MARK", value, 0);
+  if (v)
+    VSETATTR (v, att_exported);
+  array_needs_making = 1;
+
+  save_parser_state (&ps);
+  rl_clear_signals ();
+  r = parse_and_execute (savestring (cmd), "bash_execute_unix_command", SEVAL_NOHIST);
+  rl_set_signals ();
+  restore_parser_state (&ps);
+
+  v = find_variable ("READLINE_LINE");
+  maybe_make_readline_line (v ? value_cell (v) : 0);
+
+  v = find_variable ("READLINE_POINT");
+  if (v && legal_number (value_cell (v), &mi))
+    readline_set_char_offset (mi, &rl_point);
+
+  v = find_variable ("READLINE_MARK");
+  if (v && legal_number (value_cell (v), &mi))
+    readline_set_char_offset (mi, &rl_mark);
+
+  check_unbind_variable ("READLINE_LINE");
+  check_unbind_variable ("READLINE_POINT");
+  check_unbind_variable ("READLINE_MARK");
+  array_needs_making = 1;
+
+  /* and restore the readline buffer and display after command execution. */
+  /* If we clear the last line of the prompt above, redraw only that last
+     line.  If the command returns 124, we redraw unconditionally as in
+     previous versions. */
+  if (ce && r != 124)
+    rl_redraw_prompt_last_line ();
+  else
+    rl_forced_update_display ();
+
+  return 0;
+}
+
+int
+print_unix_command_map ()
+{
+  Keymap save, cmd_xmap;
+
+  save = rl_get_keymap ();
+  cmd_xmap = get_cmd_xmap_from_keymap (save);
+  rl_set_keymap (cmd_xmap);
+  rl_macro_dumper (1);
+  rl_set_keymap (save);
+  return 0;
+}
+
+static void
+init_unix_command_map ()
+{
+  emacs_std_cmd_xmap = rl_make_bare_keymap ();
+
+  emacs_std_cmd_xmap[CTRL('X')].type = ISKMAP;
+  emacs_std_cmd_xmap[CTRL('X')].function = KEYMAP_TO_FUNCTION (rl_make_bare_keymap ());
+  emacs_std_cmd_xmap[ESC].type = ISKMAP;
+  emacs_std_cmd_xmap[ESC].function = KEYMAP_TO_FUNCTION (rl_make_bare_keymap ());
+
+#if defined (VI_MODE)  
+  vi_insert_cmd_xmap = rl_make_bare_keymap ();
+  vi_movement_cmd_xmap = rl_make_bare_keymap ();
+#endif
+}
+
+static Keymap
+get_cmd_xmap_from_edit_mode ()
+{
+  if (emacs_std_cmd_xmap == 0)
+    init_unix_command_map ();
+
+  switch (rl_editing_mode)
+    {
+    case EMACS_EDITING_MODE:
+      return emacs_std_cmd_xmap;
+#if defined (VI_MODE)
+    case VI_EDITING_MODE:
+      return (get_cmd_xmap_from_keymap (rl_get_keymap ()));
+#endif
+    default:
+      return (Keymap)NULL;
+    }
+}
+
+static Keymap
+get_cmd_xmap_from_keymap (kmap)
+     Keymap kmap;
+{
+  if (emacs_std_cmd_xmap == 0)
+    init_unix_command_map ();
+
+  if (kmap == emacs_standard_keymap)
+    return emacs_std_cmd_xmap;
+  else if (kmap == emacs_meta_keymap)
+    return (FUNCTION_TO_KEYMAP (emacs_std_cmd_xmap, ESC));
+  else if (kmap == emacs_ctlx_keymap)
+    return (FUNCTION_TO_KEYMAP (emacs_std_cmd_xmap, CTRL('X')));
+#if defined (VI_MODE)
+  else if (kmap == vi_insertion_keymap)
+    return vi_insert_cmd_xmap;
+  else if (kmap == vi_movement_keymap)
+    return vi_movement_cmd_xmap;
+#endif
+  else
+    return (Keymap)NULL;
+}
+
+static int
+isolate_sequence (string, ind, need_dquote, startp)
+     char *string;
+     int ind, need_dquote, *startp;
+{
+  register int i;
+  int c, passc, delim;
+
+  for (i = ind; string[i] && whitespace (string[i]); i++)
+    ;
+  /* NEED_DQUOTE means that the first non-white character *must* be `"'. */
+  if (need_dquote && string[i] != '"')
+    {
+      builtin_error (_("%s: first non-whitespace character is not `\"'"), string);
+      return -1;
+    }
+
+  /* We can have delimited strings even if NEED_DQUOTE == 0, like the command
+     string to bind the key sequence to. */
+  delim = (string[i] == '"' || string[i] == '\'') ? string[i] : 0;
+    
+  if (startp)
+    *startp = delim ? ++i : i;
+
+  for (passc = 0; c = string[i]; i++)
+    {
+      if (passc)
+	{
+	  passc = 0;
+	  continue;
+	}
+      if (c == '\\')
+	{
+	  passc++;
+	  continue;
+	}
+      if (c == delim)
+	break;
+    }
+
+  if (delim && string[i] != delim)
+    {
+      builtin_error (_("no closing `%c' in %s"), delim, string);
+      return -1;
+    }
+
+  return i;
+}
+
+int
+bind_keyseq_to_unix_command (line)
+     char *line;
+{
+  Keymap kmap, cmd_xmap;
+  char *kseq, *value;
+  int i, kstart;
+
+  kmap = rl_get_keymap ();
+
+  /* We duplicate some of the work done by rl_parse_and_bind here, but
+     this code only has to handle `"keyseq": ["]command["]' and can
+     generate an error for anything else. */
+  i = isolate_sequence (line, 0, 1, &kstart);
+  if (i < 0)
+    return -1;
+
+  /* Create the key sequence string to pass to rl_generic_bind */
+  kseq = substring (line, kstart, i);
+
+  for ( ; line[i] && line[i] != ':'; i++)
+    ;
+  if (line[i] != ':')
+    {
+      builtin_error (_("%s: missing colon separator"), line);
+      FREE (kseq);
+      return -1;
+    }
+
+  i = isolate_sequence (line, i + 1, 0, &kstart);
+  if (i < 0)
+    {
+      FREE (kseq);
+      return -1;
+    }
+
+  /* Create the value string containing the command to execute. */
+  value = substring (line, kstart, i);
+
+  /* Save the command to execute and the key sequence in the CMD_XMAP */
+  cmd_xmap = get_cmd_xmap_from_keymap (kmap);
+  rl_generic_bind (ISMACR, kseq, value, cmd_xmap);
+
+  /* and bind the key sequence in the current keymap to a function that
+     understands how to execute from CMD_XMAP */
+  rl_bind_keyseq_in_map (kseq, bash_execute_unix_command, kmap);
+
+  free (kseq);  
+  return 0;
+}
+
+int
+unbind_unix_command (kseq)
+     char *kseq;
+{
+  Keymap cmd_xmap;
+
+  cmd_xmap = get_cmd_xmap_from_keymap (rl_get_keymap ());
+  if (rl_bind_keyseq_in_map (kseq, (rl_command_func_t *)NULL, cmd_xmap) != 0)
+    {
+      builtin_error (_("`%s': cannot unbind in command keymap"), kseq);
+      return 0;
+    }
+  return 1;
+}
+
+/* Used by the programmable completion code.  Complete TEXT as a filename,
+   but return only directories as matches.  Dequotes the filename before
+   attempting to find matches. */
+char **
+bash_directory_completion_matches (text)
+     const char *text;
+{
+  char **m1;
+  char *dfn;
+  int qc;
+
+  qc = rl_dispatching ? rl_completion_quote_character : 0;  
+  /* If rl_completion_found_quote != 0, rl_completion_matches will call the
+     filename dequoting function, causing the directory name to be dequoted
+     twice. */
+  if (rl_dispatching && rl_completion_found_quote == 0)
+    dfn = bash_dequote_filename ((char *)text, qc);
+  else
+    dfn = (char *)text;
+  m1 = rl_completion_matches (dfn, rl_filename_completion_function);
+  if (dfn != text)
+    free (dfn);
+
+  if (m1 == 0 || m1[0] == 0)
+    return m1;
+  /* We don't bother recomputing the lcd of the matches, because it will just
+     get thrown away by the programmable completion code and recomputed
+     later. */
+  (void)bash_progcomp_ignore_filenames (m1);
+  return m1;
+}
+
+char *
+bash_dequote_text (text)
+     const char *text;
+{
+  char *dtxt;
+  int qc;
+
+  qc = (text[0] == '"' || text[0] == '\'') ? text[0] : 0;
+  dtxt = bash_dequote_filename ((char *)text, qc);
+  return (dtxt);
+}
+
+/* This event hook is designed to be called after readline receives a signal
+   that interrupts read(2).  It gives reasonable responsiveness to interrupts
+   and fatal signals without executing too much code in a signal handler
+   context. */
+static int
+bash_event_hook ()
+{
+  int sig;
+
+  /* XXX - see if we need to do anything here if sigterm_received == 1,
+     we probably don't want to reset the event hook since we will not be
+     jumping to the top level */
+  if (sigterm_received)
+    {
+      /* RESET_SIGTERM;	*/
+      return 0;
+    }
+
+  sig = 0;
+  if (terminating_signal)
+    sig = terminating_signal;
+  else if (interrupt_state)
+    sig = SIGINT;
+  else if (sigalrm_seen)
+    sig = SIGALRM;
+  else
+    sig = first_pending_trap ();
+
+  /* If we're going to longjmp to top_level, make sure we clean up readline.
+     check_signals will call QUIT, which will eventually longjmp to top_level,
+     calling run_interrupt_trap along the way.  The check for sigalrm_seen is
+     to clean up the read builtin's state. */
+  if (terminating_signal || interrupt_state || sigalrm_seen)
+    rl_cleanup_after_signal ();
+  bashline_reset_event_hook ();
+
+  /* posix mode SIGINT during read -e. We only get here if SIGINT is trapped. */
+  if (posixly_correct && this_shell_builtin == read_builtin && sig == 2)
+    {
+      last_command_exit_value = 128|SIGINT;
+      throw_to_top_level ();
+    }
+
+  check_signals_and_traps ();	/* XXX */
+  return 0;
+}
+
+#endif /* READLINE */
diff --git a/bashline.h b/bashline.h
new file mode 100644
index 0000000..48c9fec
--- /dev/null
+++ b/bashline.h
@@ -0,0 +1,69 @@
+/* bashline.h -- interface to the bash readline functions in bashline.c. */
+
+/* Copyright (C) 1993-2019 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_BASHLINE_H_)
+#define _BASHLINE_H_
+
+#include "stdc.h"
+
+extern int bash_readline_initialized;
+extern int hostname_list_initialized;
+
+/* these are controlled via shopt */
+extern int perform_hostname_completion;
+extern int no_empty_command_completion;
+extern int force_fignore;
+extern int dircomplete_spelling;
+extern int dircomplete_expand;
+extern int dircomplete_expand_relpath;
+extern int complete_fullquote;
+
+extern void posix_readline_initialize PARAMS((int));
+extern void reset_completer_word_break_chars PARAMS((void));
+extern int enable_hostname_completion PARAMS((int));
+extern void initialize_readline PARAMS((void));
+extern void bashline_reset PARAMS((void));
+extern void bashline_reinitialize PARAMS((void));
+extern int bash_re_edit PARAMS((char *));
+
+extern void bashline_set_event_hook PARAMS((void));
+extern void bashline_reset_event_hook PARAMS((void));
+
+extern int bind_keyseq_to_unix_command PARAMS((char *));
+extern int bash_execute_unix_command PARAMS((int, int));
+extern int print_unix_command_map PARAMS((void));
+extern int unbind_unix_command PARAMS((char *));
+
+extern char **bash_default_completion PARAMS((const char *, int, int, int, int));
+
+void set_directory_hook PARAMS((void));
+
+/* Used by programmable completion code. */
+extern char *command_word_completion_function PARAMS((const char *, int));
+extern char *bash_groupname_completion_function PARAMS((const char *, int));
+extern char *bash_servicename_completion_function PARAMS((const char *, int));
+
+extern char **get_hostname_list PARAMS((void));
+extern void clear_hostname_list PARAMS((void));
+
+extern char **bash_directory_completion_matches PARAMS((const char *));
+extern char *bash_dequote_text PARAMS((const char *));
+
+#endif /* _BASHLINE_H_ */
diff --git a/bashtypes.h b/bashtypes.h
new file mode 100644
index 0000000..01afef4
--- /dev/null
+++ b/bashtypes.h
@@ -0,0 +1,42 @@
+/* bashtypes.h -- Bash system types. */
+
+/* Copyright (C) 1993-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_BASHTYPES_H_)
+#  define _BASHTYPES_H_
+
+#if defined (CRAY)
+#  define word __word
+#endif
+
+#include <sys/types.h>
+
+#if defined (CRAY)
+#  undef word
+#endif
+
+#if defined (HAVE_INTTYPES_H)
+#  include <inttypes.h>
+#endif
+
+#if HAVE_STDINT_H
+#  include <stdint.h>
+#endif
+
+#endif /* _BASHTYPES_H_ */
diff --git a/bracecomp.c b/bracecomp.c
new file mode 100644
index 0000000..2ea8ba9
--- /dev/null
+++ b/bracecomp.c
@@ -0,0 +1,221 @@
+/* bracecomp.c -- Complete a filename with the possible completions enclosed
+   in csh-style braces such that the list of completions is available to the
+   shell. */
+
+/* Original version by tromey@cns.caltech.edu,  Fri Feb  7 1992. */
+
+/* Copyright (C) 1993-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#if defined (BRACE_EXPANSION) && defined (READLINE)
+
+#include <stdio.h>
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include "bashansi.h"
+#include "shmbutil.h"
+
+#include "shell.h"
+#include <readline/readline.h>
+
+static int _strcompare PARAMS((char **, char **));
+
+/* Find greatest common prefix of two strings. */
+static int
+string_gcd (s1, s2)
+     char *s1, *s2;
+{
+  register int i;
+
+  if (s1 == NULL || s2 == NULL)
+    return (0);
+
+  for (i = 0; *s1 && *s2; ++s1, ++s2, ++i)
+    {
+      if (*s1 != *s2)
+	break;
+    }
+
+  return (i);
+}
+
+static char *
+really_munge_braces (array, real_start, real_end, gcd_zero)
+     char **array;
+     int real_start, real_end, gcd_zero;
+{
+  int start, end, gcd;
+  char *result, *subterm, *x;
+  int result_size, flag, tlen;
+
+  flag = 0;
+
+  if (real_start == real_end)
+    {
+      x = array[real_start] ? sh_backslash_quote (array[real_start] + gcd_zero, 0, 0)
+ 			    : sh_backslash_quote (array[0], 0, 0);
+      return x;
+    }
+
+  result = (char *)xmalloc (result_size = 16);
+  *result = '\0';
+
+  for (start = real_start; start < real_end; start = end + 1)
+    {
+      gcd = strlen (array[start]);
+      for (end = start + 1; end < real_end; end++)
+	{
+	  int temp;
+
+	  temp = string_gcd (array[start], array[end]);
+
+	  if (temp <= gcd_zero)
+	    break;
+
+	  gcd = temp;
+	}
+      end--;
+
+      if (gcd_zero == 0 && start == real_start && end != (real_end - 1))
+	{
+	  /* In this case, add in a leading '{', because we are at
+	     top level, and there isn't a consistent prefix. */
+	  result_size += 1;
+	  result = (char *)xrealloc (result, result_size);
+	  result[0] = '{'; result[1] = '\0';
+	  flag++;
+	}
+
+      /* Make sure we backslash quote every substring we insert into the
+	 resultant brace expression.  This is so the default filename
+	 quoting function won't inappropriately quote the braces. */
+      if (start == end)
+	{
+	  x = savestring (array[start] + gcd_zero);
+	  subterm = sh_backslash_quote (x, 0, 0);
+	  free (x);
+	}
+      else
+	{
+	  /* If there is more than one element in the subarray,
+	     insert the (quoted) prefix and an opening brace. */
+	  tlen = gcd - gcd_zero;
+	  x = (char *)xmalloc (tlen + 1);
+	  strncpy (x, array[start] + gcd_zero, tlen);
+	  x[tlen] = '\0';
+	  subterm = sh_backslash_quote (x, 0, 0);
+	  free (x);
+	  result_size += strlen (subterm) + 1;
+	  result = (char *)xrealloc (result, result_size);
+	  strcat (result, subterm);
+	  free (subterm);
+	  strcat (result, "{");
+	  subterm = really_munge_braces (array, start, end + 1, gcd);
+	  subterm[strlen (subterm) - 1] = '}';
+	}
+
+      result_size += strlen (subterm) + 1;
+      result = (char *)xrealloc (result, result_size);
+      strcat (result, subterm);
+      strcat (result, ",");
+      free (subterm);
+    }
+
+  if (gcd_zero == 0)
+    result[strlen (result) - 1] = flag ? '}' : '\0';
+  return (result);
+}
+
+static int
+_strcompare (s1, s2)
+     char **s1, **s2;
+{
+  int result;
+
+  result = **s1 - **s2;
+  if (result == 0)
+    result = strcmp (*s1, *s2);
+
+  return result;
+}
+
+static int
+hack_braces_completion (names)
+     char **names;
+{
+  register int i;
+  char *temp;
+
+  i = strvec_len (names);
+  if (MB_CUR_MAX > 1 && i > 2)
+    qsort (names+1, i-1, sizeof (char *), (QSFUNC *)_strcompare);
+      
+  temp = really_munge_braces (names, 1, i, 0);
+
+  for (i = 0; names[i]; ++i)
+    {
+      free (names[i]);
+      names[i] = NULL;
+    }
+  names[0] = temp;
+  return 0;
+}
+
+/* We handle quoting ourselves within hack_braces_completion, so we turn off
+   rl_filename_quoting_desired and rl_filename_quoting_function. */
+int
+bash_brace_completion (count, ignore)
+     int count, ignore;
+{
+  rl_compignore_func_t *orig_ignore_func;
+  rl_compentry_func_t *orig_entry_func;
+  rl_quote_func_t *orig_quoting_func;
+  rl_completion_func_t *orig_attempt_func;
+  int orig_quoting_desired, r;
+
+  orig_ignore_func = rl_ignore_some_completions_function;
+  orig_attempt_func = rl_attempted_completion_function;
+  orig_entry_func = rl_completion_entry_function;
+  orig_quoting_func = rl_filename_quoting_function;
+  orig_quoting_desired = rl_filename_quoting_desired;
+
+  rl_completion_entry_function = rl_filename_completion_function;
+  rl_attempted_completion_function = (rl_completion_func_t *)NULL;
+  rl_ignore_some_completions_function = hack_braces_completion;
+  rl_filename_quoting_function = (rl_quote_func_t *)NULL;
+  rl_filename_quoting_desired = 0;
+
+  r = rl_complete_internal (TAB);
+
+  rl_ignore_some_completions_function = orig_ignore_func;
+  rl_attempted_completion_function = orig_attempt_func;
+  rl_completion_entry_function = orig_entry_func;
+  rl_filename_quoting_function = orig_quoting_func;
+  rl_filename_quoting_desired = orig_quoting_desired;
+
+  return r;
+}
+#endif /* BRACE_EXPANSION && READLINE */
diff --git a/braces.c b/braces.c
new file mode 100644
index 0000000..e91d326
--- /dev/null
+++ b/braces.c
@@ -0,0 +1,843 @@
+/* braces.c -- code for doing word expansion in curly braces. */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* Stuff in curly braces gets expanded before all other shell expansions. */
+
+#include "config.h"
+
+#if defined (BRACE_EXPANSION)
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include <errno.h>
+
+#include "bashansi.h"
+#include "bashintl.h"
+
+#if defined (SHELL)
+#  include "shell.h"
+#else
+#  if defined (TEST)
+typedef char *WORD_DESC;
+typedef char **WORD_LIST;
+#define _(X)	X
+#  endif /* TEST */
+#endif /* SHELL */
+
+#include "typemax.h"		/* INTMAX_MIN, INTMAX_MAX */
+#include "general.h"
+#include "shmbutil.h"
+#include "chartypes.h"
+
+#ifndef errno
+extern int errno;
+#endif
+
+#define brace_whitespace(c) (!(c) || (c) == ' ' || (c) == '\t' || (c) == '\n')
+
+#define BRACE_SEQ_SPECIFIER	".."
+
+extern int asprintf PARAMS((char **, const char *, ...)) __attribute__((__format__ (printf, 2, 3)));
+
+/* Basic idea:
+
+   Segregate the text into 3 sections: preamble (stuff before an open brace),
+   postamble (stuff after the matching close brace) and amble (stuff after
+   preamble, and before postamble).  Expand amble, and then tack on the
+   expansions to preamble.  Expand postamble, and tack on the expansions to
+   the result so far.
+ */
+
+/* The character which is used to separate arguments. */
+static const int brace_arg_separator = ',';
+
+#if defined (PARAMS)
+static int brace_gobbler PARAMS((char *, size_t, int *, int));
+static char **expand_amble PARAMS((char *, size_t, int));
+static char **expand_seqterm PARAMS((char *, size_t));
+static char **mkseq PARAMS((intmax_t, intmax_t, intmax_t, int, int));
+static char **array_concat PARAMS((char **, char **));
+#else
+static int brace_gobbler ();
+static char **expand_amble ();
+static char **expand_seqterm ();
+static char **mkseq();
+static char **array_concat ();
+#endif
+
+#if 0
+static void
+dump_result (a)
+     char **a;
+{
+  int i;
+
+  for (i = 0; a[i]; i++)
+    printf ("dump_result: a[%d] = -%s-\n", i, a[i]);
+}
+#endif
+
+/* Return an array of strings; the brace expansion of TEXT. */
+char **
+brace_expand (text)
+     char *text;
+{
+  register int start;
+  size_t tlen;
+  char *preamble, *postamble, *amble;
+  size_t alen;
+  char **tack, **result;
+  int i, j, c, c1;
+
+  DECLARE_MBSTATE;
+
+  /* Find the text of the preamble. */
+  tlen = strlen (text);
+  i = 0;
+#if defined (CSH_BRACE_COMPAT)
+  c = brace_gobbler (text, tlen, &i, '{');	/* } */
+#else
+  /* Make sure that when we exit this loop, c == 0 or text[i] begins a
+     valid brace expansion sequence. */
+  do
+    {
+      c = brace_gobbler (text, tlen, &i, '{');	/* } */
+      c1 = c;
+      /* Verify that c begins a valid brace expansion word.  If it doesn't, we
+	 go on.  Loop stops when there are no more open braces in the word. */
+      if (c)
+	{
+	  start = j = i + 1;	/* { */
+	  c = brace_gobbler (text, tlen, &j, '}');
+	  if (c == 0)		/* it's not */
+	    {
+	      i++;
+	      c = c1;
+	      continue;
+	    }
+	  else			/* it is */
+	    {
+	      c = c1;
+	      break;
+	    }
+	}
+      else
+	break;
+    }
+  while (c);
+#endif /* !CSH_BRACE_COMPAT */
+
+  preamble = (char *)xmalloc (i + 1);
+  if (i > 0)
+    strncpy (preamble, text, i);
+  preamble[i] = '\0';
+
+  result = (char **)xmalloc (2 * sizeof (char *));
+  result[0] = preamble;
+  result[1] = (char *)NULL;
+
+  /* Special case.  If we never found an exciting character, then
+     the preamble is all of the text, so just return that. */
+  if (c != '{')
+    return (result);
+
+  /* Find the amble.  This is the stuff inside this set of braces. */
+  start = ++i;
+  c = brace_gobbler (text, tlen, &i, '}');
+
+  /* What if there isn't a matching close brace? */
+  if (c == 0)
+    {
+#if defined (NOTDEF)
+      /* Well, if we found an unquoted BRACE_ARG_SEPARATOR between START
+	 and I, then this should be an error.  Otherwise, it isn't. */
+      j = start;
+      while (j < i)
+	{
+	  if (text[j] == '\\')
+	    {
+	      j++;
+	      ADVANCE_CHAR (text, tlen, j);
+	      continue;
+	    }
+
+	  if (text[j] == brace_arg_separator)
+	    {	/* { */
+	      strvec_dispose (result);
+	      set_exit_status (EXECUTION_FAILURE);
+	      report_error ("no closing `%c' in %s", '}', text);
+	      throw_to_top_level ();
+	    }
+	  ADVANCE_CHAR (text, tlen, j);
+	}
+#endif
+      free (preamble);		/* Same as result[0]; see initialization. */
+      result[0] = savestring (text);
+      return (result);
+    }
+
+#if defined (SHELL)
+  amble = substring (text, start, i);
+  alen = i - start;
+#else
+  amble = (char *)xmalloc (1 + (i - start));
+  strncpy (amble, &text[start], (i - start));
+  alen = i - start;
+  amble[alen] = '\0';
+#endif
+
+#if defined (SHELL)
+  INITIALIZE_MBSTATE;
+
+  /* If the amble does not contain an unquoted BRACE_ARG_SEPARATOR, then
+     just return without doing any expansion.  */
+  j = 0;
+  while (amble[j])
+    {
+      if (amble[j] == '\\')
+	{
+	  j++;
+	  ADVANCE_CHAR (amble, alen, j);
+	  continue;
+	}
+
+      if (amble[j] == brace_arg_separator)
+	break;
+
+      ADVANCE_CHAR (amble, alen, j);
+    }
+
+  if (amble[j] == 0)
+    {
+      tack = expand_seqterm (amble, alen);
+      if (tack)
+	goto add_tack;
+      else if (text[i + 1])
+	{
+	  /* If the sequence expansion fails (e.g., because the integers
+	     overflow), but there is more in the string, try and process
+	     the rest of the string, which may contain additional brace
+	     expansions.  Treat the unexpanded sequence term as a simple
+	     string (including the braces). */
+	  tack = strvec_create (2);
+	  tack[0] = savestring (text+start-1);
+	  tack[0][i-start+2] = '\0';
+	  tack[1] = (char *)0;
+	  goto add_tack;
+	}
+      else
+	{
+	  free (amble);
+	  free (preamble);
+	  result[0] = savestring (text);
+	  return (result);
+	}
+    }
+#endif /* SHELL */
+
+  tack = expand_amble (amble, alen, 0);
+add_tack:
+  result = array_concat (result, tack);
+  free (amble);
+  if (tack != result)
+    strvec_dispose (tack);
+
+  postamble = text + i + 1;
+
+  if (postamble && *postamble)
+    {
+      tack = brace_expand (postamble);
+      result = array_concat (result, tack);
+      if (tack != result)
+	strvec_dispose (tack);
+    }
+
+  return (result);
+}
+
+/* Expand the text found inside of braces.  We simply try to split the
+   text at BRACE_ARG_SEPARATORs into separate strings.  We then brace
+   expand each slot which needs it, until there are no more slots which
+   need it. */
+static char **
+expand_amble (text, tlen, flags)
+     char *text;
+     size_t tlen;
+     int flags;
+{
+  char **result, **partial, **tresult;
+  char *tem;
+  int start, i, c;
+
+#if defined (SHELL)
+  DECLARE_MBSTATE;
+#endif
+
+  result = (char **)NULL;
+
+  start = i = 0;
+  c = 1;
+  while (c)
+    {
+      c = brace_gobbler (text, tlen, &i, brace_arg_separator);
+#if defined (SHELL)
+      tem = substring (text, start, i);
+#else
+      tem = (char *)xmalloc (1 + (i - start));
+      strncpy (tem, &text[start], (i - start));
+      tem[i - start] = '\0';
+#endif
+
+      partial = brace_expand (tem);
+
+      if (!result)
+	result = partial;
+      else
+	{
+	  register int lr, lp, j;
+
+	  lr = strvec_len (result);
+	  lp = strvec_len (partial);
+
+	  tresult = strvec_mresize (result, lp + lr + 1);
+	  if (tresult == 0)
+	    {
+	      internal_error (_("brace expansion: cannot allocate memory for %s"), tem);
+	      free (tem);
+	      strvec_dispose (partial);
+	      strvec_dispose (result);
+	      result = (char **)NULL;
+	      return result;
+	    }
+	  else
+	    result = tresult;
+
+	  for (j = 0; j < lp; j++)
+	    result[lr + j] = partial[j];
+
+	  result[lr + j] = (char *)NULL;
+	  free (partial);
+	}
+      free (tem);
+#if defined (SHELL)
+      ADVANCE_CHAR (text, tlen, i);
+#else
+      i++;
+#endif
+      start = i;
+    }
+  return (result);
+}
+
+#define ST_BAD	0
+#define ST_INT	1
+#define ST_CHAR	2
+#define ST_ZINT	3
+
+static char **
+mkseq (start, end, incr, type, width)
+     intmax_t start, end, incr;
+     int type, width;
+{
+  intmax_t n, prevn;
+  int i, nelem;
+  char **result, *t;
+
+  if (incr == 0)
+    incr = 1;
+
+  if (start > end && incr > 0)
+    incr = -incr;
+  else if (start < end && incr < 0)
+    {
+      if (incr == INTMAX_MIN)		/* Don't use -INTMAX_MIN */
+	return ((char **)NULL);
+      incr = -incr;
+    }
+
+  /* Check that end-start will not overflow INTMAX_MIN, INTMAX_MAX.  The +3
+     and -2, not strictly necessary, are there because of the way the number
+     of elements and value passed to strvec_create() are calculated below. */
+  if (SUBOVERFLOW (end, start, INTMAX_MIN+3, INTMAX_MAX-2))
+    return ((char **)NULL);
+
+  prevn = sh_imaxabs (end - start);
+  /* Need to check this way in case INT_MAX == INTMAX_MAX */
+  if (INT_MAX == INTMAX_MAX && (ADDOVERFLOW (prevn, 2, INT_MIN, INT_MAX)))
+    return ((char **)NULL);
+  /* Make sure the assignment to nelem below doesn't end up <= 0 due to
+     intmax_t overflow */
+  else if (ADDOVERFLOW ((prevn/sh_imaxabs(incr)), 1, INTMAX_MIN, INTMAX_MAX))
+    return ((char **)NULL);
+
+  /* XXX - TOFIX: potentially allocating a lot of extra memory if
+     imaxabs(incr) != 1 */
+  /* Instead of a simple nelem = prevn + 1, something like:
+  	nelem = (prevn / imaxabs(incr)) + 1;
+     would work */
+  if ((prevn / sh_imaxabs (incr)) > INT_MAX - 3)	/* check int overflow */
+    return ((char **)NULL);
+  nelem = (prevn / sh_imaxabs(incr)) + 1;
+  result = strvec_mcreate (nelem + 1);
+  if (result == 0)
+    {
+      internal_error (_("brace expansion: failed to allocate memory for %u elements"), (unsigned int)nelem);
+      return ((char **)NULL);
+    }
+
+  /* Make sure we go through the loop at least once, so {3..3} prints `3' */
+  i = 0;
+  n = start;
+  do
+    {
+#if defined (SHELL)
+      if (ISINTERRUPT)
+        {
+          result[i] = (char *)NULL;
+          strvec_dispose (result);
+          result = (char **)NULL;
+        }
+      QUIT;
+#endif
+      if (type == ST_INT)
+	result[i++] = t = itos (n);
+      else if (type == ST_ZINT)
+	{
+	  int len, arg;
+	  arg = n;
+	  len = asprintf (&t, "%0*d", width, arg);
+	  result[i++] = t;
+	}
+      else
+	{
+	  if (t = (char *)malloc (2))
+	    {
+	      t[0] = n;
+	      t[1] = '\0';
+	    }
+	  result[i++] = t;
+	}
+
+      /* We failed to allocate memory for this number, so we bail. */
+      if (t == 0)
+	{
+	  char *p, lbuf[INT_STRLEN_BOUND(intmax_t) + 1];
+
+	  /* Easier to do this than mess around with various intmax_t printf
+	     formats (%ld? %lld? %jd?) and PRIdMAX. */
+	  p = inttostr (n, lbuf, sizeof (lbuf));
+	  internal_error (_("brace expansion: failed to allocate memory for `%s'"), p);
+	  strvec_dispose (result);
+	  return ((char **)NULL);
+	}
+
+      /* Handle overflow and underflow of n+incr */
+      if (ADDOVERFLOW (n, incr, INTMAX_MIN, INTMAX_MAX))
+        break;
+
+      n += incr;
+
+      if ((incr < 0 && n < end) || (incr > 0 && n > end))
+	break;
+    }
+  while (1);
+
+  result[i] = (char *)0;
+  return (result);
+}
+
+static char **
+expand_seqterm (text, tlen)
+     char *text;
+     size_t tlen;
+{
+  char *t, *lhs, *rhs;
+  int lhs_t, rhs_t, lhs_l, rhs_l, width;
+  intmax_t lhs_v, rhs_v, incr;
+  intmax_t tl, tr;
+  char **result, *ep, *oep;
+
+  t = strstr (text, BRACE_SEQ_SPECIFIER);
+  if (t == 0)
+    return ((char **)NULL);
+
+  lhs_l = t - text;		/* index of start of BRACE_SEQ_SPECIFIER */
+  lhs = substring (text, 0, lhs_l);
+  rhs = substring (text, lhs_l + sizeof(BRACE_SEQ_SPECIFIER) - 1, tlen);
+
+  if (lhs[0] == 0 || rhs[0] == 0)
+    {
+      free (lhs);
+      free (rhs);
+      return ((char **)NULL);
+    }
+
+  /* Now figure out whether LHS and RHS are integers or letters.  Both
+     sides have to match. */
+  lhs_t = (legal_number (lhs, &tl)) ? ST_INT :
+  		((ISALPHA (lhs[0]) && lhs[1] == 0) ?  ST_CHAR : ST_BAD);
+
+  /* Decide on rhs and whether or not it looks like the user specified
+     an increment */
+  ep = 0;
+  if (ISDIGIT (rhs[0]) || ((rhs[0] == '+' || rhs[0] == '-') && ISDIGIT (rhs[1])))
+    {
+      rhs_t = ST_INT;
+      errno = 0;
+      tr = strtoimax (rhs, &ep, 10);
+      if (errno == ERANGE || (ep && *ep != 0 && *ep != '.'))
+	rhs_t = ST_BAD;			/* invalid */
+    }
+  else if (ISALPHA (rhs[0]) && (rhs[1] == 0 || rhs[1] == '.'))
+    {
+      rhs_t = ST_CHAR;
+      ep = rhs + 1;
+    }
+  else
+    {
+      rhs_t = ST_BAD;
+      ep = 0;
+    }
+
+  incr = 1;
+  if (rhs_t != ST_BAD)
+    {
+      oep = ep;
+      errno = 0;
+      if (ep && *ep == '.' && ep[1] == '.' && ep[2])
+	incr = strtoimax (ep + 2, &ep, 10);
+      if (*ep != 0 || errno == ERANGE)
+	rhs_t = ST_BAD;			/* invalid incr or overflow */
+      tlen -= ep - oep;
+    }
+
+  if (lhs_t != rhs_t || lhs_t == ST_BAD || rhs_t == ST_BAD)
+    {
+      free (lhs);
+      free (rhs);
+      return ((char **)NULL);
+    }
+
+  /* OK, we have something.  It's either a sequence of integers, ascending
+     or descending, or a sequence or letters, ditto.  Generate the sequence,
+     put it into a string vector, and return it. */
+  
+  if (lhs_t == ST_CHAR)
+    {
+      lhs_v = (unsigned char)lhs[0];
+      rhs_v = (unsigned char)rhs[0];
+      width = 1;
+    }
+  else
+    {
+      lhs_v = tl;		/* integer truncation */
+      rhs_v = tr;
+
+      /* Decide whether or not the terms need zero-padding */
+      rhs_l = tlen - lhs_l - sizeof (BRACE_SEQ_SPECIFIER) + 1;
+      width = 0;
+      if (lhs_l > 1 && lhs[0] == '0')
+	width = lhs_l, lhs_t = ST_ZINT;
+      if (lhs_l > 2 && lhs[0] == '-' && lhs[1] == '0')
+	width = lhs_l, lhs_t = ST_ZINT;
+      if (rhs_l > 1 && rhs[0] == '0' && width < rhs_l)
+	width = rhs_l, lhs_t = ST_ZINT;
+      if (rhs_l > 2 && rhs[0] == '-' && rhs[1] == '0' && width < rhs_l)
+	width = rhs_l, lhs_t = ST_ZINT;
+
+      if (width < lhs_l && lhs_t == ST_ZINT)
+        width = lhs_l;
+      if (width < rhs_l && lhs_t == ST_ZINT)
+        width = rhs_l;
+    }
+
+  result = mkseq (lhs_v, rhs_v, incr, lhs_t, width);
+
+  free (lhs);
+  free (rhs);
+
+  return (result);
+}
+
+/* Start at INDEX, and skip characters in TEXT. Set INDEX to the
+   index of the character matching SATISFY.  This understands about
+   quoting.  Return the character that caused us to stop searching;
+   this is either the same as SATISFY, or 0. */
+/* If SATISFY is `}', we are looking for a brace expression, so we
+   should enforce the rules that govern valid brace expansions:
+	1) to count as an arg separator, a comma or `..' has to be outside
+	   an inner set of braces.	 
+*/
+static int
+brace_gobbler (text, tlen, indx, satisfy)
+     char *text;
+     size_t tlen;
+     int *indx;
+     int satisfy;
+{
+  register int i, c, quoted, level, commas, pass_next;
+#if defined (SHELL)
+  int si;
+  char *t;
+#endif
+  DECLARE_MBSTATE;
+
+  level = quoted = pass_next = 0;
+#if defined (CSH_BRACE_COMPAT)
+  commas = 1;
+#else
+  commas = (satisfy == '}') ? 0 : 1;
+#endif
+
+  i = *indx;
+  while (c = text[i])
+    {
+      if (pass_next)
+	{
+	  pass_next = 0;
+#if defined (SHELL)
+	  ADVANCE_CHAR (text, tlen, i);
+#else
+	  i++;
+#endif
+	  continue;
+	}
+
+      /* A backslash escapes the next character.  This allows backslash to
+	 escape the quote character in a double-quoted string. */
+      if (c == '\\' && (quoted == 0 || quoted == '"' || quoted == '`'))
+	{
+	  pass_next = 1;
+	  i++;
+	  continue;
+	}
+
+#if defined (SHELL)
+      /* If compiling for the shell, treat ${...} like \{...} */
+      if (c == '$' && text[i+1] == '{' && quoted != '\'')		/* } */
+	{
+	  pass_next = 1;
+	  i++;
+	  if (quoted == 0)
+	    level++;
+	  continue;
+	}
+#endif
+
+      if (quoted)
+	{
+	  if (c == quoted)
+	    quoted = 0;
+#if defined (SHELL)
+	  /* The shell allows quoted command substitutions */
+	  if (quoted == '"' && c == '$' && text[i+1] == '(')	/*)*/
+	    goto comsub;
+#endif
+#if defined (SHELL)
+	  ADVANCE_CHAR (text, tlen, i);
+#else
+	  i++;
+#endif
+	  continue;
+	}
+
+      if (c == '"' || c == '\'' || c == '`')
+	{
+	  quoted = c;
+	  i++;
+	  continue;
+	}
+
+#if defined (SHELL)
+      /* Pass new-style command and process substitutions through unchanged. */
+      if ((c == '$' || c == '<' || c == '>') && text[i+1] == '(')			/* ) */
+	{
+comsub:
+	  si = i + 2;
+	  t = extract_command_subst (text, &si, 0);
+	  i = si;
+	  free (t);
+	  i++;
+	  continue;
+	}
+#endif
+
+      if (c == satisfy && level == 0 && quoted == 0 && commas > 0)
+	{
+	  /* We ignore an open brace surrounded by whitespace, and also
+	     an open brace followed immediately by a close brace preceded
+	     by whitespace.  */
+	  if (c == '{' &&
+	      ((!i || brace_whitespace (text[i - 1])) &&
+	       (brace_whitespace (text[i + 1]) || text[i + 1] == '}')))
+	    {
+	      i++;
+	      continue;
+	    }
+
+	    break;
+	}
+
+      if (c == '{')
+	level++;
+      else if (c == '}' && level)
+	level--;
+#if !defined (CSH_BRACE_COMPAT)
+      else if (satisfy == '}' && c == brace_arg_separator && level == 0)
+	commas++;
+      else if (satisfy == '}' && STREQN (text+i, BRACE_SEQ_SPECIFIER, 2) &&
+      		text[i+2] != satisfy && level == 0)
+	commas++;
+#endif
+
+#if defined (SHELL)
+      ADVANCE_CHAR (text, tlen, i);
+#else
+      i++;
+#endif
+    }
+
+  *indx = i;
+  return (c);
+}
+
+/* Return a new array of strings which is the result of appending each
+   string in ARR2 to each string in ARR1.  The resultant array is
+   len (arr1) * len (arr2) long.  For convenience, ARR1 (and its contents)
+   are free ()'ed.  ARR1 can be NULL, in that case, a new version of ARR2
+   is returned. */
+static char **
+array_concat (arr1, arr2)
+     char **arr1, **arr2;
+{
+  register int i, j, len, len1, len2;
+  register char **result;
+
+  if (arr1 == 0)
+    return (arr2);		/* XXX - see if we can get away without copying? */
+
+  if (arr2 == 0)
+    return (arr1);		/* XXX - caller expects us to free arr1 */
+
+  /* We can only short-circuit if the array consists of a single null element;
+     otherwise we need to replicate the contents of the other array and
+     prefix (or append, below) an empty element to each one. */
+  if (arr1[0] && arr1[0][0] == 0 && arr1[1] == 0)
+    {
+      strvec_dispose (arr1);
+      return (arr2);		/* XXX - use flags to see if we can avoid copying here */
+    }
+
+  if (arr2[0] && arr2[0][0] == 0 && arr2[1] == 0)
+    return (arr1);		/* XXX - rather than copying and freeing it */
+
+  len1 = strvec_len (arr1);
+  len2 = strvec_len (arr2);
+
+  result = (char **)malloc ((1 + (len1 * len2)) * sizeof (char *));
+  if (result == 0)
+    return (result);
+
+  len = 0;
+  for (i = 0; i < len1; i++)
+    {
+      int strlen_1 = strlen (arr1[i]);
+
+      for (j = 0; j < len2; j++)
+	{
+	  result[len] = (char *)xmalloc (1 + strlen_1 + strlen (arr2[j]));
+	  strcpy (result[len], arr1[i]);
+	  strcpy (result[len] + strlen_1, arr2[j]);
+	  len++;
+	}
+      free (arr1[i]);
+    }
+  free (arr1);
+
+  result[len] = (char *)NULL;
+  return (result);
+}
+
+#if defined (TEST)
+#include <stdio.h>
+
+void *
+xmalloc(n)
+     size_t n;
+{
+  return (malloc (n));
+}
+
+void *
+xrealloc(p, n)
+     void *p;
+     size_t n;
+{
+  return (realloc (p, n));
+}
+
+int
+internal_error (format, arg1, arg2)
+     char *format, *arg1, *arg2;
+{
+  fprintf (stderr, format, arg1, arg2);
+  fprintf (stderr, "\n");
+}
+      
+main ()
+{
+  char example[256];
+
+  for (;;)
+    {
+      char **result;
+      int i;
+
+      fprintf (stderr, "brace_expand> ");
+
+      if ((!fgets (example, 256, stdin)) ||
+	  (strncmp (example, "quit", 4) == 0))
+	break;
+
+      if (strlen (example))
+	example[strlen (example) - 1] = '\0';
+
+      result = brace_expand (example);
+
+      for (i = 0; result[i]; i++)
+	printf ("%s\n", result[i]);
+
+      strvec_dispose (result);
+    }
+}
+
+/*
+ * Local variables:
+ * compile-command: "gcc -g -Bstatic -DTEST -o brace_expand braces.c general.o"
+ * end:
+ */
+
+#endif /* TEST */
+#endif /* BRACE_EXPANSION */
diff --git a/builtins.h b/builtins.h
new file mode 100644
index 0000000..dac95fd
--- /dev/null
+++ b/builtins.h
@@ -0,0 +1,67 @@
+/* builtins.h -- What a builtin looks like, and where to find them. */
+
+/* Copyright (C) 1987-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef BUILTINS_H
+#define BUILTINS_H
+
+#include "config.h"
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include "command.h"
+#include "general.h"
+
+#if defined (ALIAS)
+#include "alias.h"
+#endif
+
+/* Flags describing various things about a builtin. */
+#define BUILTIN_ENABLED 0x01	/* This builtin is enabled. */
+#define BUILTIN_DELETED 0x02	/* This has been deleted with enable -d. */
+#define STATIC_BUILTIN  0x04	/* This builtin is not dynamically loaded. */
+#define SPECIAL_BUILTIN 0x08	/* This is a Posix `special' builtin. */
+#define ASSIGNMENT_BUILTIN 0x10	/* This builtin takes assignment statements. */
+#define POSIX_BUILTIN	0x20	/* This builtins is special in the Posix command search order. */
+#define LOCALVAR_BUILTIN   0x40	/* This builtin creates local variables */
+
+#define BASE_INDENT	4
+
+/* The thing that we build the array of builtins out of. */
+struct builtin {
+  char *name;			/* The name that the user types. */
+  sh_builtin_func_t *function;	/* The address of the invoked function. */
+  int flags;			/* One of the #defines above. */
+  char * const *long_doc;	/* NULL terminated array of strings. */
+  const char *short_doc;	/* Short version of documentation. */
+  char *handle;			/* for future use */
+};
+
+/* Found in builtins.c, created by builtins/mkbuiltins. */
+extern int num_shell_builtins;	/* Number of shell builtins. */
+extern struct builtin static_shell_builtins[];
+extern struct builtin *shell_builtins;
+extern struct builtin *current_builtin;
+
+#endif /* BUILTINS_H */
diff --git a/builtins/Makefile.in b/builtins/Makefile.in
new file mode 100644
index 0000000..3f44f05
--- /dev/null
+++ b/builtins/Makefile.in
@@ -0,0 +1,709 @@
+# This Makefile for building libbuiltins.a is in -*- text -*- for Emacs.
+#
+# Copyright (C) 1996-2017 Free Software Foundation, Inc.
+
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+PACKAGE = @PACKAGE_NAME@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+
+#
+SHELL = @MAKE_SHELL@
+RANLIB = @RANLIB@
+CC = @CC@
+CC_FOR_BUILD = @CC_FOR_BUILD@
+AR = @AR@
+ARFLAGS = @ARFLAGS@
+RM = rm -f
+CP = cp
+
+EXEEXT = @EXEEXT@
+
+prefix = @prefix@
+
+srcdir = @srcdir@
+VPATH = @srcdir@
+topdir = @top_srcdir@
+
+datarootdir = @datarootdir@
+
+includedir = @includedir@
+datadir = @datadir@
+localedir = @localedir@
+
+loadablesdir = @loadablesdir@
+
+# Support an alternate destination root directory for package building
+DESTDIR =
+
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+BUILD_DIR = @BUILD_DIR@
+
+LIBBUILD = ${BUILD_DIR}/lib
+
+PROFILE_FLAGS = @PROFILE_FLAGS@
+CFLAGS = @CFLAGS@
+CFLAGS_FOR_BUILD = @CFLAGS_FOR_BUILD@ @CROSS_COMPILE@
+CPPFLAGS = @CPPFLAGS@
+CPPFLAGS_FOR_BUILD = @CPPFLAGS_FOR_BUILD@
+LOCAL_CFLAGS = @LOCAL_CFLAGS@ ${DEBUG}
+DEFS = @DEFS@
+LOCAL_DEFS = @LOCAL_DEFS@
+
+LIBS = @LIBS@
+LDFLAGS = @LDFLAGS@ $(LOCAL_LDFLAGS) $(CFLAGS)
+LDFLAGS_FOR_BUILD = @LDFLAGS_FOR_BUILD@ $(LOCAL_LDFLAGS) $(CFLAGS_FOR_BUILD)
+LOCAL_LDFLAGS = @LOCAL_LDFLAGS@
+LIBS_FOR_BUILD = @LIBS_FOR_BUILD@
+#LIBS_FOR_BUILD = $(LIBS)
+
+BASHINCDIR = ${topdir}/include
+
+RL_INCLUDEDIR = @RL_INCLUDEDIR@
+
+INTL_LIBSRC = ${topdir}/lib/intl
+INTL_BUILDDIR = ${LIBBUILD}/intl
+INTL_LIBDIR = ${INTL_BUILDDIR}
+INTL_LIBRARY = ${INTL_BUILDDIR}/libintl.a
+INTL_INC = @INTL_INC@
+INTL_DEP = @INTL_DEP@
+LIBINTL_H = @LIBINTL_H@
+
+HELPDIR = @HELPDIR@
+MKDIRS = ${topdir}/support/mkdirs
+
+HELPFILES_TARGET = @HELPFILES_TARGET@
+
+INCLUDES = -I. -I.. @RL_INCLUDE@ -I$(topdir) -I$(BASHINCDIR) -I$(topdir)/lib -I$(srcdir) ${INTL_INC}
+
+BASE_CCFLAGS = ${PROFILE_FLAGS} $(DEFS) $(LOCAL_DEFS) $(SYSTEM_FLAGS) \
+	 ${INCLUDES} $(LOCAL_CFLAGS)
+
+CCFLAGS = ${ADDON_CFLAGS} $(BASE_CCFLAGS) $(CPPFLAGS) $(CFLAGS)
+
+CCFLAGS_FOR_BUILD = $(BASE_CCFLAGS) $(CPPFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD)
+
+GCC_LINT_FLAGS = -Wall -Wshadow -Wpointer-arith -Wcast-qual \
+		 -Wcast-align -Wstrict-prototypes -Wconversion \
+		 -Wmissing-prototypes -Wtraditional -Wredundant-decls -pedantic
+
+MKBUILTINS = mkbuiltins$(EXEEXT)
+DIRECTDEFINE = -D $(srcdir)
+HELPDIRDEFINE = @HELPDIRDEFINE@
+HELPSTRINGS = @HELPSTRINGS@
+
+# xxx this is bad style
+RL_LIBSRC = $(topdir)/lib/readline
+
+.SUFFIXES:
+.SUFFIXES: .def .c .o
+# How to make a .o file from a .def file.
+.def.o:
+	$(RM) $@
+	./$(MKBUILTINS) $(DIRECTDEFINE) $<
+	$(CC) -c $(CCFLAGS) $*.c || ( $(RM) $*.c ; exit 1 )
+	$(RM) $*.c
+
+# How to make a .c file from a .def file.
+.def.c:
+	$(RM) $@
+	./$(MKBUILTINS) $(DIRECTDEFINE) $<
+
+# default rule for making a .o file from a .c file
+.c.o:
+	$(RM) $@
+	$(CC) -c $(CCFLAGS) $<
+
+DEFSRC =  $(srcdir)/alias.def $(srcdir)/bind.def $(srcdir)/break.def \
+	  $(srcdir)/builtin.def $(srcdir)/caller.def \
+	  $(srcdir)/cd.def $(srcdir)/colon.def \
+	  $(srcdir)/command.def $(srcdir)/declare.def $(srcdir)/echo.def \
+	  $(srcdir)/enable.def $(srcdir)/eval.def $(srcdir)/getopts.def \
+	  $(srcdir)/exec.def $(srcdir)/exit.def $(srcdir)/fc.def \
+	  $(srcdir)/fg_bg.def $(srcdir)/hash.def $(srcdir)/help.def \
+	  $(srcdir)/history.def $(srcdir)/jobs.def $(srcdir)/kill.def \
+	  $(srcdir)/let.def $(srcdir)/read.def $(srcdir)/return.def \
+	  $(srcdir)/set.def $(srcdir)/setattr.def $(srcdir)/shift.def \
+	  $(srcdir)/source.def $(srcdir)/suspend.def $(srcdir)/test.def \
+	  $(srcdir)/times.def $(srcdir)/trap.def $(srcdir)/type.def \
+	  $(srcdir)/ulimit.def $(srcdir)/umask.def $(srcdir)/wait.def \
+	  $(srcdir)/reserved.def $(srcdir)/pushd.def $(srcdir)/shopt.def \
+	  $(srcdir)/printf.def $(srcdir)/complete.def $(srcdir)/mapfile.def
+
+STATIC_SOURCE = common.c evalstring.c evalfile.c getopt.c bashgetopt.c \
+		getopt.h 
+
+OFILES = builtins.o \
+	alias.o bind.o break.o builtin.o caller.o cd.o colon.o command.o \
+	common.o declare.o echo.o enable.o eval.o evalfile.o \
+	evalstring.o exec.o exit.o fc.o fg_bg.o hash.o help.o history.o \
+	jobs.o kill.o let.o mapfile.o \
+	pushd.o read.o return.o set.o setattr.o shift.o source.o \
+	suspend.o test.o times.o trap.o type.o ulimit.o umask.o \
+	wait.o getopts.o shopt.o printf.o getopt.o bashgetopt.o complete.o
+
+CREATED_FILES = builtext.h builtins.c psize.aux pipesize.h tmpbuiltins.c \
+	tmpbuiltins.h
+CREATED_OBJECTS = tmpbuiltins.o gen-helpfiles.o mkbuiltins.o
+
+all: $(MKBUILTINS) libbuiltins.a $(HELPFILES_TARGET)
+targets: libbuiltins.a $(HELPFILES_TARGET)
+
+libbuiltins.a: $(MKBUILTINS) $(OFILES) builtins.o
+	$(RM) $@
+	$(AR) $(ARFLAGS) $@ $(OFILES)
+	-$(RANLIB) $@
+
+tmpbuiltins.c:	$(MKBUILTINS) $(DEFSRC)
+	./$(MKBUILTINS) -externfile tmpbuiltins.h -structfile $@ \
+		-noproduction -nofunctions \
+		$(DIRECTDEFINE) $(HELPSTRINGS) $(DEFSRC)
+
+tmpbuiltins.h:	tmpbuiltins.c
+
+gen-helpfiles.o: ../config.h
+gen-helpfiles.o: gen-helpfiles.c
+	$(RM) $@
+	$(CC_FOR_BUILD) -c $(CCFLAGS_FOR_BUILD) $<
+
+gen-helpfiles:	tmpbuiltins.o gen-helpfiles.o
+	$(CC_FOR_BUILD) ${CCFLAGS_FOR_BUILD} $(LDFLAGS_FOR_BUILD) -o $@ gen-helpfiles.o tmpbuiltins.o $(LIBS_FOR_BUILD)
+
+builtext.h builtins.c: $(MKBUILTINS) $(DEFSRC)
+	@-if test -f builtins.c; then mv -f builtins.c old-builtins.c; fi
+	@-if test -f builtext.h; then mv -f builtext.h old-builtext.h; fi
+	./$(MKBUILTINS) -externfile builtext.h -structfile builtins.c \
+	    -noproduction $(DIRECTDEFINE) $(HELPDIRDEFINE) $(HELPSTRINGS) $(DEFSRC)
+	@-if cmp -s old-builtext.h builtext.h 2>/dev/null; then \
+		mv old-builtext.h builtext.h; \
+	 else \
+		$(RM) old-builtext.h; \
+	 fi
+	@-if cmp -s old-builtins.c builtins.c 2>/dev/null; then \
+		mv old-builtins.c builtins.c; \
+	 else \
+		$(RM) old-builtins.c; \
+	 fi
+
+helpdoc:	gen-helpfiles
+	./gen-helpfiles ${HELPDIRDEFINE}
+
+install-help:
+	@-if test -n "${HELPDIR}" && test -d helpfiles ; then \
+		test -d $(DESTDIR)${HELPDIR} || ${SHELL} ${MKDIRS} $(DESTDIR)$(HELPDIR) ;\
+		( for f in helpfiles/*; do \
+			echo installing $$f; \
+			${INSTALL_DATA} $$f $(DESTDIR)$(HELPDIR); \
+		  done; ) ; \
+	fi
+
+install:	@HELPINSTALL@
+
+mkbuiltins.o: ../config.h
+mkbuiltins.o: mkbuiltins.c
+	$(RM) $@
+	$(CC_FOR_BUILD) -c $(CCFLAGS_FOR_BUILD) $<
+
+mkbuiltins$(EXEEXT): mkbuiltins.o
+	$(CC_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $(MKBUILTINS) mkbuiltins.o $(LIBS_FOR_BUILD)
+
+# rules for deficient makes, like SunOS
+mkbuiltins.o: mkbuiltins.c
+builtins.o: builtins.c
+common.o: common.c
+bashgetopt.o: bashgetopt.c
+getopt.o: getopt.c
+evalstring.o: evalstring.c          
+evalfile.o: evalfile.c
+
+tmpbuiltins.o: tmpbuiltins.c
+gen-helpfiles.o: gen-helpfiles.c
+
+ulimit.o: pipesize.h
+
+pipesize.h:	psize.aux
+	$(SHELL) $(srcdir)/psize.sh > $@
+
+# Technically this is wrong; the pipe size should be for the target system,
+# not the build host.
+psize.aux:	psize.c
+	$(CC_FOR_BUILD) $(CCFLAGS_FOR_BUILD) ${LDFLAGS_FOR_BUILD} -o $@ $(srcdir)/psize.c
+
+documentation: builtins.texi
+
+builtins.texi: $(MKBUILTINS)
+	./$(MKBUILTINS) -documentonly $(DEFSRC)
+
+clean:
+	$(RM) $(OFILES) $(CREATED_FILES) libbuiltins.a
+	$(RM) $(MKBUILTINS) gen-helpfiles $(CREATED_OBJECTS)
+	-test -d helpfiles && $(RM) -r helpfiles
+
+mostlyclean: 
+	$(RM) $(OFILES) libbuiltins.a
+
+distclean maintainer-clean: clean
+	$(RM) Makefile
+
+$(OFILES):	$(MKBUILTINS) ../config.h
+
+../version.h: ../config.h ../Makefile Makefile
+	-( cd ${BUILD_DIR} && ${MAKE} ${MFLAGS} version.h )
+
+# maintainer special - for now
+po:	builtins.c
+	xgettext -L C -o $(topdir)/po/builtins.pot --keyword='N_' builtins.c 2>/dev/null
+
+${LIBINTL_H}:
+	@echo making $@ in ${INTL_BUILDDIR}
+	@(cd ${INTL_BUILDDIR} && \
+		$(MAKE) $(MFLAGS) libintl.h) || exit 1
+
+# dependencies
+
+alias.o: alias.def
+bind.o: bind.def
+break.o: break.def
+builtin.o: builtin.def
+caller.o: caller.def
+cd.o: cd.def
+colon.o: colon.def
+command.o: command.def
+declare.o: declare.def
+echo.o: echo.def
+enable.o: enable.def
+eval.o: eval.def
+exec.o: exec.def
+exit.o: exit.def
+fc.o: fc.def
+fg_bg.o: fg_bg.def
+hash.o: hash.def
+help.o: help.def
+history.o: history.def
+jobs.o: jobs.def
+kill.o: kill.def
+let.o: let.def
+mapfile.o: mapfile.def
+printf.o: printf.def
+pushd.o: pushd.def
+read.o: read.def
+return.o: return.def
+set.o: set.def
+setattr.o: setattr.def
+shift.o: shift.def
+shopt.o: shopt.def
+source.o: source.def
+suspend.o: suspend.def
+test.o: test.def
+times.o: times.def
+trap.o: trap.def
+type.o: type.def
+ulimit.o: ulimit.def
+umask.o: umask.def
+wait.o: wait.def
+getopts.o: getopts.def
+reserved.o: reserved.def
+complete.o: complete.def
+
+# C files
+bashgetopt.o: ../config.h $(topdir)/bashansi.h $(BASHINCDIR)/ansi_stdlib.h
+bashgetopt.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/bashjmp.h
+bashgetopt.o: $(topdir)/command.h $(topdir)/general.h $(topdir)/xmalloc.h $(topdir)/error.h
+bashgetopt.o: $(topdir)/variables.h $(topdir)/conftypes.h $(topdir)/quit.h $(BASHINCDIR)/maxpath.h
+bashgetopt.o: $(topdir)/unwind_prot.h $(topdir)/dispose_cmd.h
+bashgetopt.o: $(topdir)/make_cmd.h $(topdir)/subst.h $(topdir)/sig.h
+bashgetopt.o: ../pathnames.h $(topdir)/externs.h $(srcdir)/common.h
+bashgetopt.o: $(BASHINCDIR)/chartypes.h
+common.o: $(topdir)/bashtypes.h $(BASHINCDIR)/posixstat.h $(topdir)/bashansi.h $(BASHINCDIR)/ansi_stdlib.h
+common.o: $(topdir)/shell.h $(topdir)/syntax.h ../config.h $(topdir)/bashjmp.h $(BASHINCDIR)/posixjmp.h
+common.o: $(topdir)/sig.h $(topdir)/command.h $(topdir)/parser.h
+common.o: $(topdir)/general.h $(topdir)/xmalloc.h $(BASHINCDIR)/stdc.h $(BASHINCDIR)/memalloc.h
+common.o: $(topdir)/variables.h $(topdir)/conftypes.h $(topdir)/input.h
+common.o: $(topdir)/siglist.h $(topdir)/bashhist.h $(topdir)/quit.h
+common.o: $(topdir)/unwind_prot.h $(BASHINCDIR)/maxpath.h $(topdir)/jobs.h
+common.o: $(topdir)/builtins.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h
+common.o: $(topdir)/subst.h $(topdir)/execute_cmd.h $(topdir)/error.h
+common.o: $(topdir)/externs.h ../pathnames.h ./builtext.h
+common.o: $(BASHINCDIR)/chartypes.h
+evalfile.o: $(topdir)/bashtypes.h $(BASHINCDIR)/posixstat.h ${BASHINCDIR}/filecntl.h
+evalfile.o: $(topdir)/bashansi.h $(BASHINCDIR)/ansi_stdlib.h
+evalfile.o: $(topdir)/shell.h $(topdir)/syntax.h ../config.h $(topdir)/bashjmp.h
+evalfile.o: $(topdir)/command.h $(topdir)/general.h $(topdir)/xmalloc.h $(topdir)/error.h
+evalfile.o: $(topdir)/variables.h $(topdir)/conftypes.h $(topdir)/quit.h $(BASHINCDIR)/maxpath.h
+evalfile.o: $(topdir)/unwind_prot.h $(topdir)/dispose_cmd.h
+evalfile.o: $(topdir)/make_cmd.h $(topdir)/subst.h $(topdir)/sig.h
+evalfile.o: ../pathnames.h $(topdir)/externs.h $(topdir)/parser.h
+evalfile.o: $(topdir)/jobs.h $(topdir)/builtins.h $(topdir)/flags.h
+evalfile.o: $(topdir)/input.h $(topdir)/execute_cmd.h
+evalfile.o: $(topdir)/bashhist.h $(srcdir)/common.h
+evalstring.o: ../config.h $(topdir)/bashansi.h $(BASHINCDIR)/ansi_stdlib.h
+evalstring.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/bashjmp.h $(BASHINCDIR)/posixjmp.h
+evalstring.o: $(topdir)/sig.h $(topdir)/command.h $(topdir)/siglist.h
+evalstring.o: $(BASHINCDIR)/memalloc.h $(topdir)/variables.h $(topdir)/conftypes.h $(topdir)/input.h
+evalstring.o: $(topdir)/quit.h $(topdir)/unwind_prot.h
+evalstring.o: $(BASHINCDIR)/maxpath.h $(topdir)/jobs.h $(topdir)/builtins.h
+evalstring.o: $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/subst.h
+evalstring.o: $(topdir)/externs.h $(topdir)/jobs.h $(topdir)/builtins.h
+evalstring.o: $(topdir)/flags.h $(topdir)/input.h $(topdir)/execute_cmd.h
+evalstring.o: $(topdir)/bashhist.h $(srcdir)/common.h
+evalstring.o: $(topdir)/trap.h $(topdir)/redir.h ../pathnames.h
+#evalstring.o: $(topdir)/y.tab.h
+getopt.o: ../config.h $(BASHINCDIR)/memalloc.h
+getopt.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/bashjmp.h $(topdir)/command.h
+getopt.o: $(topdir)/general.h $(topdir)/xmalloc.h $(topdir)/error.h $(topdir)/variables.h $(topdir)/conftypes.h
+getopt.o: $(topdir)/quit.h $(BASHINCDIR)/maxpath.h $(topdir)/unwind_prot.h
+getopt.o: $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/subst.h
+getopt.o: $(topdir)/sig.h ../pathnames.h $(topdir)/externs.h
+getopt.o: $(srcdir)/getopt.h 
+mkbuiltins.o: ../config.h $(topdir)/bashtypes.h $(BASHINCDIR)/posixstat.h
+mkbuiltins.o: ${BASHINCDIR}/filecntl.h
+mkbuiltins.o: $(topdir)/bashansi.h $(BASHINCDIR)/ansi_stdlib.h
+
+# def files
+alias.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+alias.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h $(BASHINCDIR)/maxpath.h
+alias.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/sig.h
+alias.o: $(topdir)/subst.h $(topdir)/externs.h $(srcdir)/common.h
+alias.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+alias.o: ../pathnames.h
+bind.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h $(topdir)/error.h
+bind.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/sig.h
+bind.o: $(topdir)/subst.h $(topdir)/externs.h $(srcdir)/bashgetopt.h
+bind.o: $(topdir)/general.h $(topdir)/xmalloc.h $(BASHINCDIR)/maxpath.h $(topdir)/bashline.h
+bind.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h 
+break.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h 
+break.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h
+break.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/sig.h
+break.o: $(topdir)/subst.h $(topdir)/externs.h $(BASHINCDIR)/maxpath.h
+break.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+break.o: ../pathnames.h $(topdir)/execute_cmd.h
+builtin.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+builtin.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h $(topdir)/externs.h
+builtin.o: $(topdir)/quit.h $(srcdir)/common.h $(BASHINCDIR)/maxpath.h $(topdir)/sig.h
+builtin.o: $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/subst.h
+builtin.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h 
+builtin.o: $(srcdir)/bashgetopt.h ../pathnames.h $(topdir)/execute_cmd.h
+caller.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h $(topdir)/error.h
+caller.o: $(topdir)/general.h $(topdir)/xmalloc.h $(topdir)/quit.h $(topdir)/dispose_cmd.h
+caller.o: $(topdir)/make_cmd.h $(topdir)/subst.h $(topdir)/externs.h $(topdir)/sig.h
+caller.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+caller.o: $(srcdir)/common.h $(BASHINCDIR)/maxpath.h ./builtext.h
+caller.o: ${BASHINCDIR}/chartypes.h $(topdir)/bashtypes.h ../pathnames.h
+cd.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h $(topdir)/error.h
+cd.o: $(topdir)/general.h $(topdir)/xmalloc.h $(topdir)/quit.h $(topdir)/dispose_cmd.h
+cd.o: $(topdir)/make_cmd.h $(topdir)/subst.h $(topdir)/externs.h
+cd.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+cd.o: $(srcdir)/common.h $(BASHINCDIR)/maxpath.h ../pathnames.h
+cd.o: $(topdir)/sig.h
+colon.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h $(topdir)/error.h
+colon.o: $(topdir)/general.h $(topdir)/xmalloc.h $(topdir)/subst.h $(topdir)/externs.h
+colon.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/sig.h
+colon.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+colon.o: $(BASHINCDIR)/maxpath.h ../pathnames.h
+colon.o: $(srcdir)/common.h
+command.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+command.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h $(topdir)/externs.h
+command.o: $(topdir)/quit.h $(srcdir)/bashgetopt.h $(BASHINCDIR)/maxpath.h
+command.o: $(topdir)/sig.h
+command.o: $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/subst.h
+command.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h 
+command.o: ../pathnames.h
+declare.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+declare.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h
+declare.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/sig.h
+declare.o: $(topdir)/subst.h $(topdir)/externs.h $(BASHINCDIR)/maxpath.h
+declare.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+declare.o: $(topdir)/arrayfunc.h $(srcdir)/bashgetopt.h $(topdir)/flags.h
+declare.o: ./builtext.h ../pathnames.h
+echo.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h $(topdir)/error.h
+echo.o: $(topdir)/general.h $(topdir)/xmalloc.h $(topdir)/subst.h $(topdir)/externs.h
+echo.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/sig.h
+echo.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+echo.o: $(BASHINCDIR)/maxpath.h ../pathnames.h
+echo.o: $(srcdir)/common.h
+enable.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+enable.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h
+enable.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h
+enable.o: $(topdir)/subst.h $(topdir)/externs.h $(topdir)/sig.h
+enable.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+enable.o: $(BASHINCDIR)/maxpath.h ../pathnames.h
+enable.o: $(topdir)/pcomplete.h
+eval.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+eval.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h
+eval.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h
+eval.o: $(topdir)/subst.h $(topdir)/externs.h  $(topdir)/sig.h
+eval.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+eval.o: $(BASHINCDIR)/maxpath.h ../pathnames.h
+exec.o: $(topdir)/bashtypes.h
+exec.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+exec.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h
+exec.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/sig.h
+exec.o: $(topdir)/subst.h $(topdir)/externs.h $(topdir)/flags.h
+exec.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+exec.o: $(srcdir)/common.h $(topdir)/execute_cmd.h $(BASHINCDIR)/maxpath.h
+exec.o: $(topdir)/findcmd.h $(topdir)/jobs.h ../pathnames.h
+exit.o: $(topdir)/bashtypes.h
+exit.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+exit.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h
+exit.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/sig.h
+exit.o: $(topdir)/subst.h $(topdir)/externs.h  $(topdir)/jobs.h
+exit.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+exit.o: $(topdir)/execute_cmd.h
+exit.o: $(BASHINCDIR)/maxpath.h ./builtext.h ../pathnames.h
+fc.o: $(topdir)/bashtypes.h $(BASHINCDIR)/posixstat.h
+fc.o: $(topdir)/builtins.h $(topdir)/command.h $(srcdir)/bashgetopt.h
+fc.o: $(topdir)/bashhist.h $(topdir)/parser.h
+fc.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h $(topdir)/error.h
+fc.o: $(topdir)/general.h $(topdir)/xmalloc.h $(BASHINCDIR)/maxpath.h
+fc.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/sig.h
+fc.o: $(topdir)/subst.h $(topdir)/externs.h $(topdir)/shell.h $(topdir)/syntax.h
+fc.o: $(topdir)/flags.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+fc.o: $(topdir)/bashansi.h $(BASHINCDIR)/ansi_stdlib.h $(BASHINCDIR)/chartypes.h
+fc.o: ../pathnames.h
+fg_bg.o: $(topdir)/bashtypes.h $(srcdir)/bashgetopt.h
+fg_bg.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+fg_bg.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h
+fg_bg.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/sig.h
+fg_bg.o: $(topdir)/subst.h $(topdir)/externs.h $(BASHINCDIR)/maxpath.h
+fg_bg.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+fg_bg.o: $(topdir)/execute_cmd.h
+fg_bg.o: $(topdir)/jobs.h ../pathnames.h
+getopts.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+getopts.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h
+getopts.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/sig.h
+getopts.o: $(topdir)/subst.h $(topdir)/externs.h $(BASHINCDIR)/maxpath.h
+getopts.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+getopts.o: $(topdir)/execute_cmd.h
+getopts.o: ../pathnames.h
+hash.o: $(topdir)/builtins.h $(topdir)/command.h $(topdir)/quit.h
+hash.o: $(topdir)/findcmd.h $(topdir)/hashlib.h $(topdir)/sig.h
+hash.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+hash.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h
+hash.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h
+hash.o: $(topdir)/conftypes.h $(topdir)/execute_cmd.h
+hash.o: $(srcdir)/common.h $(BASHINCDIR)/maxpath.h ../pathnames.h
+help.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+help.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h
+help.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h
+help.o: $(topdir)/subst.h $(topdir)/externs.h $(BASHINCDIR)/maxpath.h
+help.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h
+help.o: $(topdir)/conftypes.h $(topdir)/execute_cmd.h
+help.o: ${srcdir}/common.h $(topdir)/sig.h ../pathnames.h
+history.o: $(topdir)/bashtypes.h
+history.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+history.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h
+history.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h
+history.o: $(topdir)/subst.h $(topdir)/externs.h $(topdir)/sig.h  $(topdir)/parser.h
+history.o: ${BASHINCDIR}/filecntl.h $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h
+history.o: $(topdir)/variables.h $(topdir)/conftypes.h $(topdir)/bashhist.h $(BASHINCDIR)/maxpath.h
+history.o: ../pathnames.h
+inlib.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+inlib.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h
+inlib.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+inlib.o: $(BASHINCDIR)/maxpath.h $(topdir)/subst.h $(topdir)/externs.h
+inlib.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h ../pathnames.h
+jobs.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h $(topdir)/error.h
+jobs.o: $(topdir)/general.h $(topdir)/xmalloc.h $(topdir)/quit.h $(srcdir)/bashgetopt.h
+jobs.o: $(BASHINCDIR)/maxpath.h $(topdir)/externs.h $(topdir)/jobs.h
+jobs.o: $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/subst.h
+jobs.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h 
+jobs.o: $(topdir)/sig.h ../pathnames.h
+kill.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h $(topdir)/error.h
+kill.o: $(topdir)/general.h $(topdir)/xmalloc.h $(topdir)/subst.h $(topdir)/externs.h
+kill.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/sig.h
+kill.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/trap.h $(topdir)/unwind_prot.h
+kill.o: $(topdir)/variables.h $(topdir)/conftypes.h $(BASHINCDIR)/maxpath.h
+kill.o: $(topdir)/jobs.h ../pathnames.h
+let.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+let.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h
+let.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/sig.h
+let.o: $(topdir)/subst.h $(topdir)/externs.h $(BASHINCDIR)/maxpath.h
+let.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+let.o: ../pathnames.h
+printf.o: ../config.h $(BASHINCDIR)/memalloc.h $(topdir)/bashjmp.h
+printf.o: $(topdir)/command.h $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h
+printf.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h
+printf.o: $(topdir)/subst.h $(topdir)/externs.h $(topdir)/sig.h
+printf.o: ../pathnames.h $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h
+printf.o: $(topdir)/variables.h $(topdir)/conftypes.h $(BASHINCDIR)/stdc.h $(srcdir)/bashgetopt.h
+printf.o: $(topdir)/bashtypes.h ${srcdir}/common.h $(BASHINCDIR)/chartypes.h
+printf.o: ${BASHINCDIR}/shmbutil.h ${BASHINCDIR}/shmbchar.h
+printf.o: ../pathnames.h
+pushd.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+pushd.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h
+pushd.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h
+pushd.o: $(topdir)/subst.h $(topdir)/externs.h $(topdir)/sig.h
+pushd.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+pushd.o: $(BASHINCDIR)/maxpath.h $(srcdir)/common.h ./builtext.h
+pushd.o: ../pathnames.h
+read.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+read.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h
+read.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h
+read.o: $(topdir)/subst.h $(topdir)/externs.h $(BASHINCDIR)/maxpath.h
+read.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+read.o: $(BASHINCDIR)/shtty.h $(topdir)/sig.h
+read.o: ${BASHINCDIR}/shmbutil.h ${BASHINCDIR}/shmbchar.h
+read.o: $(topdir)/arrayfunc.h ../pathnames.h
+return.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+return.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h
+return.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/sig.h
+return.o: $(topdir)/subst.h $(topdir)/externs.h $(BASHINCDIR)/maxpath.h
+return.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h
+return.o: $(topdir)/conftypes.h $(topdir)/execute_cmd.h
+return.o: ../pathnames.h
+set.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+set.o: $(topdir)/general.h $(topdir)/xmalloc.h $(topdir)/subst.h $(topdir)/externs.h
+set.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h
+set.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+set.o: $(BASHINCDIR)/maxpath.h $(topdir)/error.h $(topdir)/sig.h
+set.o: $(topdir)/arrayfunc.h ../pathnames.h $(topdir)/parser.h
+setattr.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+setattr.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h $(BASHINCDIR)/maxpath.h
+setattr.o: $(topdir)/quit.h $(srcdir)/common.h $(srcdir)/bashgetopt.h
+setattr.o: $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/subst.h
+setattr.o: $(topdir)/externs.h $(topdir)/flags.h $(topdir)/sig.h
+setattr.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h
+setattr.o: $(topdir)/conftypes.h $(topdir)/execute_cmd.h
+setattr.o: $(topdir)/arrayfunc.h ../pathnames.h
+shift.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+shift.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h
+shift.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/sig.h
+shift.o: $(topdir)/subst.h $(topdir)/externs.h $(BASHINCDIR)/maxpath.h
+shift.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+shift.o: ../pathnames.h
+shopt.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+shopt.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h 
+shopt.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h
+shopt.o: $(topdir)/subst.h $(topdir)/externs.h $(BASHINCDIR)/maxpath.h
+shopt.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+shopt.o: $(srcdir)/common.h $(srcdir)/bashgetopt.h ../pathnames.h
+shopt.o: $(topdir)/bashhist.h $(topdir)/bashline.h $(topdir)/sig.h
+source.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+source.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h $(topdir)/findcmd.h
+source.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/sig.h
+source.o: $(topdir)/subst.h $(topdir)/externs.h $(BASHINCDIR)/maxpath.h
+source.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+source.o: $(srcdir)/bashgetopt.h $(topdir)/flags.h $(topdir)/trap.h
+source.o: $(topdir)/execute_cmd.h
+source.o: ../pathnames.h
+suspend.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+suspend.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h
+suspend.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/sig.h
+suspend.o: $(topdir)/subst.h $(topdir)/externs.h $(BASHINCDIR)/maxpath.h
+suspend.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+suspend.o: $(topdir)/jobs.h ../pathnames.h
+test.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+test.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h
+test.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/sig.h
+test.o: $(topdir)/subst.h $(topdir)/externs.h $(BASHINCDIR)/maxpath.h
+test.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+test.o: $(topdir)/execute_cmd.h $(topdir)/test.h ../pathnames.h
+times.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+times.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h
+times.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/sig.h
+times.o: $(topdir)/subst.h $(topdir)/externs.h $(BASHINCDIR)/maxpath.h
+times.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+times.o: $(BASHINCDIR)/posixtime.h ../pathnames.h
+trap.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+trap.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h $(topdir)/externs.h
+trap.o: $(topdir)/quit.h $(srcdir)/common.h $(BASHINCDIR)/maxpath.h $(topdir)/sig.h
+trap.o: $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/subst.h
+trap.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+trap.o: $(topdir)/findcmd.h ../pathnames.h
+type.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+type.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h
+type.o: $(topdir)/quit.h $(srcdir)/common.h $(BASHINCDIR)/maxpath.h $(topdir)/sig.h
+type.o: $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/subst.h
+type.o: $(topdir)/execute_cmd.h $(topdir)/parser.h
+type.o: $(topdir)/externs.h $(topdir)/hashcmd.h ../pathnames.h
+type.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h 
+ulimit.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+ulimit.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h
+ulimit.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/sig.h
+ulimit.o: $(topdir)/subst.h $(topdir)/externs.h $(BASHINCDIR)/maxpath.h
+ulimit.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+ulimit.o: ../pathnames.h
+umask.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+umask.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h
+umask.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/sig.h
+umask.o: $(topdir)/subst.h $(topdir)/externs.h $(BASHINCDIR)/maxpath.h
+umask.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+umask.o: $(BASHINCDIR)/chartypes.h ../pathnames.h
+wait.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+wait.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h
+wait.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h
+wait.o: $(topdir)/subst.h $(topdir)/externs.h $(BASHINCDIR)/maxpath.h
+wait.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/unwind_prot.h $(topdir)/variables.h $(topdir)/conftypes.h
+wait.o: $(topdir)/jobs.h $(topdir)/sig.h $(topdir)/execute_cmd.h
+wait.o: $(BASHINCDIR)/chartypes.h ../pathnames.h
+
+complete.o: ../config.h ../pathnames.h
+complete.o: ${topdir}/shell.h $(topdir)/syntax.h ${topdir}/bashjmp.h ${BASHINCDIR}/posixjmp.h ${topdir}/sig.h  
+complete.o: ${topdir}/unwind_prot.h ${topdir}/variables.h
+complete.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/sig.h
+complete.o: ${topdir}/bashtypes.h ${topdir}/bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+complete.o: ${topdir}/builtins.h ${topdir}/general.h
+complete.o: ${topdir}/bashtypes.h ${BASHINCDIR}/chartypes.h ${topdir}/xmalloc.h
+complete.o: ${topdir}/pcomplete.h
+complete.o: ${srcdir}/common.h ${srcdir}/bashgetopt.h
+mapfile.o: $(topdir)/command.h ../config.h $(BASHINCDIR)/memalloc.h
+mapfile.o: $(topdir)/error.h $(topdir)/general.h $(topdir)/xmalloc.h
+mapfile.o: $(topdir)/quit.h $(topdir)/dispose_cmd.h $(topdir)/make_cmd.h $(topdir)/sig.h
+mapfile.o: $(topdir)/subst.h $(topdir)/externs.h $(BASHINCDIR)/maxpath.h
+mapfile.o: $(topdir)/shell.h $(topdir)/syntax.h $(topdir)/variables.h $(topdir)/conftypes.h
+mapfile.o: $(topdir)/arrayfunc.h ../pathnames.h
+
+#bind.o: $(RL_LIBSRC)chardefs.h $(RL_LIBSRC)readline.h $(RL_LIBSRC)keymaps.h
+
+# libintl dependencies
+bind.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+break.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+caller.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+cd.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+common.c: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+complete.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+declare.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+enable.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+evalfile.c: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+exec.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+exit.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+fc.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+fg_bg.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+getopt.c: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+hash.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+help.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+history.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+inlib.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+jobs.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+kill.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+let.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+mapfile.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+mkbuiltins.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+printf.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+pushd.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+read.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+return.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+set.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+setattr.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+shift.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+shopt.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+source.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+suspend.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+type.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+ulimit.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+umask.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
diff --git a/builtins/alias.def b/builtins/alias.def
new file mode 100644
index 0000000..0ab9069
--- /dev/null
+++ b/builtins/alias.def
@@ -0,0 +1,241 @@
+This file is alias.def, from which is created alias.c
+It implements the builtins "alias" and "unalias" in Bash.
+
+Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$BUILTIN alias
+$FUNCTION alias_builtin
+$DEPENDS_ON ALIAS
+$PRODUCES alias.c
+$SHORT_DOC alias [-p] [name[=value] ... ]
+Define or display aliases.
+
+Without arguments, `alias' prints the list of aliases in the reusable
+form `alias NAME=VALUE' on standard output.
+
+Otherwise, an alias is defined for each NAME whose VALUE is given.
+A trailing space in VALUE causes the next word to be checked for
+alias substitution when the alias is expanded.
+
+Options:
+  -p	print all defined aliases in a reusable format
+
+Exit Status:
+alias returns true unless a NAME is supplied for which no alias has been
+defined.
+$END
+
+#include <config.h>
+
+#if defined (ALIAS)
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#  include "../bashansi.h"
+#  include "../bashintl.h"
+
+#  include <stdio.h>
+#  include "../shell.h"
+#  include "../alias.h"
+#  include "common.h"
+#  include "bashgetopt.h"
+
+/* Flags for print_alias */
+#define AL_REUSABLE	0x01
+
+static void print_alias PARAMS((alias_t *, int));
+
+/* Hack the alias command in a Korn shell way. */
+int
+alias_builtin (list)
+     WORD_LIST *list;
+{
+  int any_failed, offset, pflag, dflags;
+  alias_t **alias_list, *t;
+  char *name, *value;
+
+  dflags = posixly_correct ? 0 : AL_REUSABLE;
+  pflag = 0;
+  reset_internal_getopt ();
+  while ((offset = internal_getopt (list, "p")) != -1)
+    {
+      switch (offset)
+	{
+	case 'p':
+	  pflag = 1;
+	  dflags |= AL_REUSABLE;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+
+  list = loptend;
+
+  if (list == 0 || pflag)
+    {
+      if (aliases == 0)
+	return (EXECUTION_SUCCESS);
+
+      alias_list = all_aliases ();
+
+      if (alias_list == 0)
+	return (EXECUTION_SUCCESS);
+
+      for (offset = 0; alias_list[offset]; offset++)
+	print_alias (alias_list[offset], dflags);
+
+      free (alias_list);	/* XXX - Do not free the strings. */
+
+      if (list == 0)
+	return (sh_chkwrite (EXECUTION_SUCCESS));
+    }
+
+  any_failed = 0;
+  while (list)
+    {
+      name = list->word->word;
+
+      for (offset = 0; name[offset] && name[offset] != '='; offset++)
+	;
+
+      if (offset && name[offset] == '=')
+	{
+	  name[offset] = '\0';
+	  value = name + offset + 1;
+
+	  if (legal_alias_name (name, 0) == 0)
+	    {
+	      builtin_error (_("`%s': invalid alias name"), name);
+	      any_failed++;
+	    }
+	  else
+	    add_alias (name, value);
+	}
+      else
+	{
+	  t = find_alias (name);
+	  if (t)
+	    print_alias (t, dflags);
+	  else
+	    {
+	      sh_notfound (name);
+	      any_failed++;
+	    }
+	}
+      list = list->next;
+    }
+
+  return (any_failed ? EXECUTION_FAILURE : EXECUTION_SUCCESS);
+}
+#endif /* ALIAS */
+
+$BUILTIN unalias
+$FUNCTION unalias_builtin
+$DEPENDS_ON ALIAS
+$SHORT_DOC unalias [-a] name [name ...]
+Remove each NAME from the list of defined aliases.
+
+Options:
+  -a	remove all alias definitions
+
+Return success unless a NAME is not an existing alias.
+$END
+
+#if defined (ALIAS)
+/* Remove aliases named in LIST from the aliases database. */
+int
+unalias_builtin (list)
+     register WORD_LIST *list;
+{
+  register alias_t *alias;
+  int opt, aflag;
+
+  aflag = 0;
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "a")) != -1)
+    {
+      switch (opt)
+	{
+	case 'a':
+	  aflag = 1;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+
+  list = loptend;
+
+  if (aflag)
+    {
+      delete_all_aliases ();
+      return (EXECUTION_SUCCESS);
+    }
+
+  if (list == 0)
+    {
+      builtin_usage ();
+      return (EX_USAGE);
+    }
+
+  aflag = 0;
+  while (list)
+    {
+      alias = find_alias (list->word->word);
+
+      if (alias)
+	remove_alias (alias->name);
+      else
+	{
+	  sh_notfound (list->word->word);
+	  aflag++;
+	}
+
+      list = list->next;
+    }
+
+  return (aflag ? EXECUTION_FAILURE : EXECUTION_SUCCESS);
+}
+
+/* Output ALIAS in such a way as to allow it to be read back in. */
+static void
+print_alias (alias, flags)
+     alias_t *alias;
+     int flags;
+{
+  char *value;
+
+  value = sh_single_quote (alias->value);
+  if (flags & AL_REUSABLE)
+    printf ("alias %s", (alias->name && alias->name[0] == '-') ? "-- " : "");
+  printf ("%s=%s\n", alias->name, value);
+  free (value);
+
+  fflush (stdout);
+}
+#endif /* ALIAS */
diff --git a/builtins/bashgetopt.c b/builtins/bashgetopt.c
new file mode 100644
index 0000000..405ced4
--- /dev/null
+++ b/builtins/bashgetopt.c
@@ -0,0 +1,181 @@
+/* bashgetopt.c -- `getopt' for use by the builtins. */
+
+/* Copyright (C) 1992-2002 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "../bashansi.h"
+#include <chartypes.h>
+#include <errno.h>
+
+#include "../shell.h"
+#include "common.h"
+
+#include "bashgetopt.h"
+
+#define ISOPT(s)	(((*(s) == '-') || (plus && *(s) == '+')) && (s)[1])
+#define NOTOPT(s)	(((*(s) != '-') && (!plus || *(s) != '+')) || (s)[1] == '\0')
+			
+static int	sp;
+
+char    *list_optarg;
+int	list_optopt;
+int	list_opttype;
+
+static WORD_LIST *lhead = (WORD_LIST *)NULL;
+WORD_LIST	*lcurrent = (WORD_LIST *)NULL;
+WORD_LIST	*loptend;	/* Points to the first non-option argument in the list */
+
+int
+internal_getopt(list, opts)
+WORD_LIST	*list;
+char		*opts;
+{
+	register int c;
+	register char *cp;
+	int	plus;	/* nonzero means to handle +option */
+	static char errstr[3] = { '-', '\0', '\0' };
+
+	plus = *opts == '+';
+	if (plus)
+		opts++;
+
+	if (list == 0) {
+		list_optarg = (char *)NULL;
+		loptend = (WORD_LIST *)NULL;	/* No non-option arguments */
+		return -1;
+	}
+
+	if (list != lhead || lhead == 0) {
+		/* Hmmm.... called with a different word list.  Reset. */
+		sp = 1;
+		lcurrent = lhead = list;
+		loptend = (WORD_LIST *)NULL;
+	}
+
+	if (sp == 1) {
+		if (lcurrent == 0 || NOTOPT(lcurrent->word->word)) {
+		    	lhead = (WORD_LIST *)NULL;
+		    	loptend = lcurrent;
+			return(-1);
+		} else if (ISHELP (lcurrent->word->word)) {
+			lhead = (WORD_LIST *)NULL;
+			loptend = lcurrent;
+			return (GETOPT_HELP);
+		} else if (lcurrent->word->word[0] == '-' &&
+			   lcurrent->word->word[1] == '-' &&
+			   lcurrent->word->word[2] == 0) {
+			lhead = (WORD_LIST *)NULL;
+			loptend = lcurrent->next;
+			return(-1);
+		}
+		errstr[0] = list_opttype = lcurrent->word->word[0];
+	}
+
+	list_optopt = c = lcurrent->word->word[sp];
+
+	if (c == ':' || (cp = strchr(opts, c)) == NULL) {
+		errstr[1] = c;
+		sh_invalidopt (errstr);		
+		if (lcurrent->word->word[++sp] == '\0') {
+			lcurrent = lcurrent->next;
+			sp = 1;
+		}
+		list_optarg = NULL;
+		if (lcurrent)
+			loptend = lcurrent->next;
+		return('?');
+	}
+
+	if (*++cp == ':' || *cp == ';') {
+		/* `:': Option requires an argument. */
+		/* `;': option argument may be missing */
+		/* We allow -l2 as equivalent to -l 2 */
+		if (lcurrent->word->word[sp+1]) {
+			list_optarg = lcurrent->word->word + sp + 1;
+			lcurrent = lcurrent->next;
+		/* If the specifier is `;', don't set optarg if the next
+		   argument looks like another option. */
+#if 0
+		} else if (lcurrent->next && (*cp == ':' || lcurrent->next->word->word[0] != '-')) {
+#else
+		} else if (lcurrent->next && (*cp == ':' || NOTOPT(lcurrent->next->word->word))) {
+#endif
+			lcurrent = lcurrent->next;
+			list_optarg = lcurrent->word->word;
+			lcurrent = lcurrent->next;
+		} else if (*cp == ';') {
+			list_optarg = (char *)NULL;
+			lcurrent = lcurrent->next;
+		} else {	/* lcurrent->next == NULL */
+			errstr[1] = c;
+			sh_needarg (errstr);
+			sp = 1;
+			list_optarg = (char *)NULL;
+			return('?');
+		}
+		sp = 1;
+	} else if (*cp == '#') {
+		/* option requires a numeric argument */
+		if (lcurrent->word->word[sp+1]) {
+			if (DIGIT(lcurrent->word->word[sp+1])) {
+				list_optarg = lcurrent->word->word + sp + 1;
+				lcurrent = lcurrent->next;
+			} else
+				list_optarg = (char *)NULL;
+		} else {
+			if (lcurrent->next && legal_number(lcurrent->next->word->word, (intmax_t *)0)) {
+				lcurrent = lcurrent->next;
+				list_optarg = lcurrent->word->word;
+				lcurrent = lcurrent->next;
+			} else {
+				errstr[1] = c;
+				sh_neednumarg (errstr);
+				sp = 1;
+				list_optarg = (char *)NULL;
+				return ('?');
+			}
+		}
+
+	} else {
+		/* No argument, just return the option. */
+		if (lcurrent->word->word[++sp] == '\0') {
+			sp = 1;
+			lcurrent = lcurrent->next;
+		}
+		list_optarg = (char *)NULL;
+	}
+
+	return(c);
+}
+
+/*
+ * reset_internal_getopt -- force the in[ft]ernal getopt to reset
+ */
+
+void
+reset_internal_getopt ()
+{
+	lhead = lcurrent = loptend = (WORD_LIST *)NULL;
+	sp = 1;
+}
diff --git a/builtins/bashgetopt.h b/builtins/bashgetopt.h
new file mode 100644
index 0000000..dcdaa48
--- /dev/null
+++ b/builtins/bashgetopt.h
@@ -0,0 +1,42 @@
+/* bashgetopt.h -- extern declarations for stuff defined in bashgetopt.c. */
+
+/* Copyright (C) 1993-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* See getopt.h for the explanation of these variables. */
+
+#if !defined (__BASH_GETOPT_H)
+#  define __BASH_GETOPT_H
+
+#include <stdc.h>
+
+#define GETOPT_EOF	-1
+#define GETOPT_HELP	-99
+
+extern char *list_optarg;
+
+extern int list_optopt;
+extern int list_opttype;
+
+extern WORD_LIST *lcurrent;
+extern WORD_LIST *loptend;
+
+extern int internal_getopt PARAMS((WORD_LIST *, char *));
+extern void reset_internal_getopt PARAMS((void));
+
+#endif /* !__BASH_GETOPT_H */
diff --git a/builtins/bind.def b/builtins/bind.def
new file mode 100644
index 0000000..ccfc08d
--- /dev/null
+++ b/builtins/bind.def
@@ -0,0 +1,405 @@
+This file is bind.def, from which is created bind.c.
+It implements the builtin "bind" in Bash.
+
+Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES bind.c
+
+#include <config.h>
+
+$BUILTIN bind
+$DEPENDS_ON READLINE
+$FUNCTION bind_builtin
+$SHORT_DOC bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-x keyseq:shell-command] [keyseq:readline-function or readline-command]
+Set Readline key bindings and variables.
+
+Bind a key sequence to a Readline function or a macro, or set a
+Readline variable.  The non-option argument syntax is equivalent to
+that found in ~/.inputrc, but must be passed as a single argument:
+e.g., bind '"\C-x\C-r": re-read-init-file'.
+
+Options:
+  -m  keymap         Use KEYMAP as the keymap for the duration of this
+                     command.  Acceptable keymap names are emacs,
+                     emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move,
+                     vi-command, and vi-insert.
+  -l                 List names of functions.
+  -P                 List function names and bindings.
+  -p                 List functions and bindings in a form that can be
+                     reused as input.
+  -S                 List key sequences that invoke macros and their values
+  -s                 List key sequences that invoke macros and their values
+                     in a form that can be reused as input.
+  -V                 List variable names and values
+  -v                 List variable names and values in a form that can
+                     be reused as input.
+  -q  function-name  Query about which keys invoke the named function.
+  -u  function-name  Unbind all keys which are bound to the named function.
+  -r  keyseq         Remove the binding for KEYSEQ.
+  -f  filename       Read key bindings from FILENAME.
+  -x  keyseq:shell-command	Cause SHELL-COMMAND to be executed when
+				KEYSEQ is entered.
+  -X                 List key sequences bound with -x and associated commands
+                     in a form that can be reused as input.
+
+Exit Status:
+bind returns 0 unless an unrecognized option is given or an error occurs.
+$END
+
+#if defined (READLINE)
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+#include <readline/readline.h>
+#include <readline/history.h>
+
+#include "../bashintl.h"
+
+#include "../shell.h"
+#include "../bashline.h"
+#include "bashgetopt.h"
+#include "common.h"
+
+static int query_bindings PARAMS((char *));
+static int unbind_command PARAMS((char *));
+static int unbind_keyseq PARAMS((char *));
+
+#define BIND_RETURN(x)  do { return_code = x; goto bind_exit; } while (0)
+
+#define LFLAG	0x0001
+#define PFLAG	0x0002
+#define FFLAG	0x0004
+#define VFLAG	0x0008
+#define QFLAG	0x0010
+#define MFLAG	0x0020
+#define RFLAG	0x0040
+#define PPFLAG	0x0080
+#define VVFLAG	0x0100
+#define SFLAG   0x0200
+#define SSFLAG  0x0400
+#define UFLAG	0x0800
+#define XFLAG	0x1000
+#define XXFLAG	0x2000
+
+int
+bind_builtin (list)
+     WORD_LIST *list;
+{
+  int return_code;
+  Keymap kmap, saved_keymap;
+  int flags, opt;
+  char *initfile, *map_name, *fun_name, *unbind_name, *remove_seq, *cmd_seq, *t;
+
+  if (no_line_editing)
+    {
+#if 0
+      builtin_error (_("line editing not enabled"));
+      return (EXECUTION_FAILURE);
+#else
+      builtin_warning (_("line editing not enabled"));
+#endif
+    }
+
+  kmap = saved_keymap = (Keymap) NULL;
+  flags = 0;
+  initfile = map_name = fun_name = unbind_name = remove_seq = cmd_seq = (char *)NULL;
+  return_code = EXECUTION_SUCCESS;
+
+  if (bash_readline_initialized == 0)
+    initialize_readline ();
+
+  begin_unwind_frame ("bind_builtin");
+  unwind_protect_var (rl_outstream);
+
+  rl_outstream = stdout;
+
+  reset_internal_getopt ();  
+  while ((opt = internal_getopt (list, "lvpVPsSXf:q:u:m:r:x:")) != -1)
+    {
+      switch (opt)
+	{
+	case 'l':
+	  flags |= LFLAG;
+	  break;
+	case 'v':
+	  flags |= VFLAG;
+	  break;
+	case 'p':
+	  flags |= PFLAG;
+	  break;
+	case 'f':
+	  flags |= FFLAG;
+	  initfile = list_optarg;
+	  break;
+	case 'm':
+	  flags |= MFLAG;
+	  map_name = list_optarg;
+	  break;
+	case 'q':
+	  flags |= QFLAG;
+	  fun_name = list_optarg;
+	  break;
+	case 'u':
+	  flags |= UFLAG;
+	  unbind_name = list_optarg;
+	  break;
+	case 'r':
+	  flags |= RFLAG;
+	  remove_seq = list_optarg;
+	  break;
+	case 'V':
+	  flags |= VVFLAG;
+	  break;
+	case 'P':
+	  flags |= PPFLAG;
+	  break;
+	case 's':
+	  flags |= SFLAG;
+	  break;
+	case 'S':
+	  flags |= SSFLAG;
+	  break;
+	case 'x':
+	  flags |= XFLAG;
+	  cmd_seq = list_optarg;
+	  break;
+	case 'X':
+	  flags |= XXFLAG;
+	  break;
+	case GETOPT_HELP:
+	default:
+	  builtin_usage ();
+	  BIND_RETURN (EX_USAGE);
+	}
+    }
+
+  list = loptend;
+
+  /* First, see if we need to install a special keymap for this
+     command.  Then start on the arguments. */
+
+  if ((flags & MFLAG) && map_name)
+    {
+      kmap = rl_get_keymap_by_name (map_name);
+      if (kmap == 0)
+	{
+	  builtin_error (_("`%s': invalid keymap name"), map_name);
+	  BIND_RETURN (EXECUTION_FAILURE);
+	}
+    }
+
+  if (kmap)
+    {
+      saved_keymap = rl_get_keymap ();
+      rl_set_keymap (kmap);
+    }
+
+  /* XXX - we need to add exclusive use tests here.  It doesn't make sense
+     to use some of these options together. */
+  /* Now hack the option arguments */
+  if (flags & LFLAG)
+    rl_list_funmap_names ();
+
+  if (flags & PFLAG)
+    rl_function_dumper (1);
+
+  if (flags & PPFLAG)
+    rl_function_dumper (0);
+
+  if (flags & SFLAG)
+    rl_macro_dumper (1);
+
+  if (flags & SSFLAG)
+    rl_macro_dumper (0);
+
+  if (flags & VFLAG)
+    rl_variable_dumper (1);
+
+  if (flags & VVFLAG)
+    rl_variable_dumper (0);
+
+  if ((flags & FFLAG) && initfile)
+    {
+      if (rl_read_init_file (initfile) != 0)
+	{
+	  t = printable_filename (initfile, 0);
+	  builtin_error (_("%s: cannot read: %s"), t, strerror (errno));
+	  if (t != initfile)
+	    free (t);
+	  BIND_RETURN (EXECUTION_FAILURE);
+	}
+    }
+
+  if ((flags & QFLAG) && fun_name)
+    return_code = query_bindings (fun_name);
+
+  if ((flags & UFLAG) && unbind_name)
+    return_code = unbind_command (unbind_name);
+
+  if ((flags & RFLAG) && remove_seq)
+    {
+      opt = unbind_keyseq (remove_seq);
+      BIND_RETURN (opt);
+    }
+
+  if (flags & XFLAG)
+    return_code = bind_keyseq_to_unix_command (cmd_seq);
+
+  if (flags & XXFLAG)
+    return_code = print_unix_command_map ();
+
+  /* Process the rest of the arguments as binding specifications. */
+  while (list)
+    {
+      int olen, nlen, d, i;
+      char **obindings, **nbindings;
+
+      obindings = rl_invoking_keyseqs (bash_execute_unix_command);
+      olen = obindings ? strvec_len (obindings) : 0;
+
+      rl_parse_and_bind (list->word->word);
+
+      nbindings = rl_invoking_keyseqs (bash_execute_unix_command);
+      nlen = nbindings ? strvec_len (nbindings) : 0;
+
+      if (nlen < olen)	/* fewer bind -x bindings */
+	for (d = olen - nlen, i = 0; i < olen && d > 0; i++)
+	  if (nlen == 0 || strvec_search (nbindings, obindings[i]) >= 0)
+	    {
+	      unbind_unix_command (obindings[i]);
+	      d--;
+	    }
+
+      strvec_dispose (obindings);
+      strvec_dispose (nbindings);
+
+      list = list->next;
+    }
+
+ bind_exit:
+  if (saved_keymap)
+    rl_set_keymap (saved_keymap);
+
+  run_unwind_frame ("bind_builtin");
+
+  if (return_code < 0)
+    return_code = EXECUTION_FAILURE;
+
+  return (sh_chkwrite (return_code));
+}
+
+static int
+query_bindings (name)
+     char *name;
+{
+  rl_command_func_t *function;
+  char **keyseqs;
+  int j;
+
+  function = rl_named_function (name);
+  if (function == 0)
+    {
+      builtin_error (_("`%s': unknown function name"), name);
+      return EXECUTION_FAILURE;
+    }
+
+  keyseqs = rl_invoking_keyseqs (function);
+
+  if (!keyseqs)
+    {
+      printf (_("%s is not bound to any keys.\n"), name);
+      return EXECUTION_FAILURE;
+    }
+
+  printf (_("%s can be invoked via "), name);
+  for (j = 0; j < 5 && keyseqs[j]; j++)
+    printf ("\"%s\"%s", keyseqs[j], keyseqs[j + 1] ? ", " : ".\n");
+  if (keyseqs[j])
+    printf ("...\n");
+  strvec_dispose (keyseqs);
+  return EXECUTION_SUCCESS;
+}
+
+static int
+unbind_command (name)
+     char *name;
+{
+  rl_command_func_t *function;
+
+  function = rl_named_function (name);
+  if (function == 0)
+    {
+      builtin_error (_("`%s': unknown function name"), name);
+      return EXECUTION_FAILURE;
+    }
+
+  rl_unbind_function_in_map (function, rl_get_keymap ());
+  return EXECUTION_SUCCESS;
+}
+
+static int
+unbind_keyseq (seq)
+     char *seq;
+{
+  char *kseq;
+  int kslen, type;
+  rl_command_func_t *f;
+
+  kseq = (char *)xmalloc ((2 * strlen (seq)) + 1);
+  if (rl_translate_keyseq (seq, kseq, &kslen))
+    {
+      free (kseq);
+      builtin_error (_("`%s': cannot unbind"), seq);
+      return EXECUTION_FAILURE;
+    }
+  if ((f = rl_function_of_keyseq_len (kseq, kslen, (Keymap)0, &type)) == 0)
+    {
+      free (kseq);
+      return (EXECUTION_SUCCESS);
+    }
+  if (type == ISKMAP)
+    f = ((Keymap) f)[ANYOTHERKEY].function;
+
+  /* I wish this didn't have to translate the key sequence again, but readline
+     doesn't have a binding function that takes a translated key sequence as
+     an argument. */
+  if (rl_bind_keyseq (seq, (rl_command_func_t *)NULL) != 0)
+    {
+      free (kseq);
+      builtin_error (_("`%s': cannot unbind"), seq);
+      return (EXECUTION_FAILURE);
+    }
+
+  if (f == bash_execute_unix_command)
+    unbind_unix_command (seq);
+
+  free (kseq);
+  return (EXECUTION_SUCCESS);
+}
+#endif /* READLINE */
diff --git a/builtins/break.def b/builtins/break.def
new file mode 100644
index 0000000..b73ed5e
--- /dev/null
+++ b/builtins/break.def
@@ -0,0 +1,143 @@
+This file is break.def, from which is created break.c.
+It implements the builtins "break" and "continue" in Bash.
+
+Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES break.c
+
+$BUILTIN break
+$FUNCTION break_builtin
+$SHORT_DOC break [n]
+Exit for, while, or until loops.
+
+Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing
+loops.
+
+Exit Status:
+The exit status is 0 unless N is not greater than or equal to 1.
+$END
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include "../bashintl.h"
+
+#include "../shell.h"
+#include "../execute_cmd.h"
+#include "common.h"
+
+static int check_loop_level PARAMS((void));
+
+/* The depth of while's and until's. */
+int loop_level = 0;
+
+/* Non-zero when a "break" instruction is encountered. */
+int breaking = 0;
+
+/* Non-zero when we have encountered a continue instruction. */
+int continuing = 0;
+
+/* Set up to break x levels, where x defaults to 1, but can be specified
+   as the first argument. */
+int
+break_builtin (list)
+     WORD_LIST *list;
+{
+  intmax_t newbreak;
+
+  CHECK_HELPOPT (list);
+
+  if (check_loop_level () == 0)
+    return (EXECUTION_SUCCESS);
+
+  (void)get_numeric_arg (list, 1, &newbreak);
+
+  if (newbreak <= 0)
+    {
+      sh_erange (list->word->word, _("loop count"));
+      breaking = loop_level;
+      return (EXECUTION_FAILURE);
+    }
+
+  if (newbreak > loop_level)
+    newbreak = loop_level;
+
+  breaking = newbreak;
+
+  return (EXECUTION_SUCCESS);
+}
+
+$BUILTIN continue
+$FUNCTION continue_builtin
+$SHORT_DOC continue [n]
+Resume for, while, or until loops.
+
+Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.
+If N is specified, resumes the Nth enclosing loop.
+
+Exit Status:
+The exit status is 0 unless N is not greater than or equal to 1.
+$END
+
+/* Set up to continue x levels, where x defaults to 1, but can be specified
+   as the first argument. */
+int
+continue_builtin (list)
+     WORD_LIST *list;
+{
+  intmax_t newcont;
+
+  CHECK_HELPOPT (list);
+
+  if (check_loop_level () == 0)
+    return (EXECUTION_SUCCESS);
+
+  (void)get_numeric_arg (list, 1, &newcont);
+
+  if (newcont <= 0)
+    {
+      sh_erange (list->word->word, _("loop count"));
+      breaking = loop_level;
+      return (EXECUTION_FAILURE);
+    }
+
+  if (newcont > loop_level)
+    newcont = loop_level;
+
+  continuing = newcont;
+
+  return (EXECUTION_SUCCESS);
+}
+
+/* Return non-zero if a break or continue command would be okay.
+   Print an error message if break or continue is meaningless here. */
+static int
+check_loop_level ()
+{
+#if defined (BREAK_COMPLAINS)
+  if (loop_level == 0 && posixly_correct == 0)
+    builtin_error (_("only meaningful in a `for', `while', or `until' loop"));
+#endif /* BREAK_COMPLAINS */
+
+  return (loop_level);
+}
diff --git a/builtins/builtin.def b/builtins/builtin.def
new file mode 100644
index 0000000..74060ee
--- /dev/null
+++ b/builtins/builtin.def
@@ -0,0 +1,85 @@
+This file is builtin.def, from which is created builtin.c.
+It implements the builtin "builtin" in Bash.
+
+Copyright (C) 1987-2017 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES builtin.c
+
+$BUILTIN builtin
+$FUNCTION builtin_builtin
+$SHORT_DOC builtin [shell-builtin [arg ...]]
+Execute shell builtins.
+
+Execute SHELL-BUILTIN with arguments ARGs without performing command
+lookup.  This is useful when you wish to reimplement a shell builtin
+as a shell function, but need to execute the builtin within the function.
+
+Exit Status:
+Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is
+not a shell builtin.
+$END
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include "../shell.h"
+#include "../execute_cmd.h"
+#include "common.h"
+#include "bashgetopt.h"
+
+/* Run the command mentioned in list directly, without going through the
+   normal alias/function/builtin/filename lookup process. */
+int
+builtin_builtin (list)
+     WORD_LIST *list;
+{
+  sh_builtin_func_t *function;
+  register char *command;
+
+  if (no_options (list))
+    return (EX_USAGE);
+  list = loptend;	/* skip over possible `--' */
+
+  if (list == 0)
+    return (EXECUTION_SUCCESS);
+
+  command = list->word->word;
+#if defined (DISABLED_BUILTINS)
+  function = builtin_address (command);
+#else /* !DISABLED_BUILTINS */
+  function = find_shell_builtin (command);
+#endif /* !DISABLED_BUILTINS */
+
+  if (function == 0)
+    {
+      sh_notbuiltin (command);
+      return (EXECUTION_FAILURE);
+    }
+  else
+    {
+      this_command_name = command;
+      this_shell_builtin = function;	/* overwrite "builtin" as this builtin */
+      list = list->next;
+      return ((*function) (list));
+    }
+}
diff --git a/builtins/caller.def b/builtins/caller.def
new file mode 100644
index 0000000..1000979
--- /dev/null
+++ b/builtins/caller.def
@@ -0,0 +1,156 @@
+This file is caller.def, from which is created caller.c.  It implements the
+builtin "caller" in Bash.
+
+Copyright (C) 2002-2008 Rocky Bernstein for Free Software Foundation, Inc.
+Copyright (C) 2008-2019 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES caller.c
+
+$BUILTIN caller
+$FUNCTION caller_builtin
+$DEPENDS_ON DEBUGGER
+$SHORT_DOC caller [expr]
+Return the context of the current subroutine call.
+
+Without EXPR, returns "$line $filename".  With EXPR, returns
+"$line $subroutine $filename"; this extra information can be used to
+provide a stack trace.
+
+The value of EXPR indicates how many call frames to go back before the
+current one; the top frame is frame 0.
+
+Exit Status:
+Returns 0 unless the shell is not executing a shell function or EXPR
+is invalid.
+$END
+
+#include <config.h>
+#include <stdio.h>
+#include "chartypes.h"
+#include "bashtypes.h"
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include <errno.h>
+
+#include "../bashintl.h"
+
+#include "../shell.h"
+#include "common.h"
+#include "builtext.h"
+#include "bashgetopt.h"
+
+#ifdef LOADABLE_BUILTIN
+#  include "builtins.h"
+#endif
+
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+int
+caller_builtin (list)
+     WORD_LIST *list;
+{
+#if !defined (ARRAY_VARS)
+  printf ("1 NULL\n");
+  return (EXECUTION_FAILURE);
+#else
+  SHELL_VAR *funcname_v, *bash_source_v, *bash_lineno_v;
+  ARRAY *funcname_a, *bash_source_a, *bash_lineno_a;
+  char *funcname_s, *source_s, *lineno_s;
+  intmax_t num;
+
+  CHECK_HELPOPT (list);
+
+  GET_ARRAY_FROM_VAR ("FUNCNAME", funcname_v, funcname_a);
+  GET_ARRAY_FROM_VAR ("BASH_SOURCE", bash_source_v, bash_source_a);
+  GET_ARRAY_FROM_VAR ("BASH_LINENO", bash_lineno_v, bash_lineno_a);
+
+  if (bash_lineno_a == 0 || array_empty (bash_lineno_a))
+    return (EXECUTION_FAILURE);
+
+  if (bash_source_a == 0 || array_empty (bash_source_a))
+    return (EXECUTION_FAILURE);
+
+ if (no_options (list))
+    return (EX_USAGE);
+  list = loptend;       /* skip over possible `--' */
+
+  /* If there is no argument list, then give short form: line filename. */
+  if (list == 0)
+    {
+      lineno_s = array_reference (bash_lineno_a, 0);
+      source_s = array_reference (bash_source_a, 1);
+      printf("%s %s\n", lineno_s ? lineno_s : "NULL", source_s ? source_s : "NULL");
+      return (EXECUTION_SUCCESS);
+    }
+  
+  if (funcname_a == 0 || array_empty (funcname_a))
+    return (EXECUTION_FAILURE);
+
+  if (legal_number (list->word->word, &num))
+    {
+      lineno_s = array_reference (bash_lineno_a, num);
+      source_s = array_reference (bash_source_a, num+1);
+      funcname_s = array_reference (funcname_a, num+1);
+
+      if (lineno_s == NULL|| source_s == NULL || funcname_s == NULL)
+	return (EXECUTION_FAILURE);
+
+      printf("%s %s %s\n", lineno_s, funcname_s, source_s);
+    }
+  else
+    {
+      sh_invalidnum (list->word->word);
+      builtin_usage ();
+      return (EX_USAGE);
+    }
+
+  return (EXECUTION_SUCCESS);
+#endif
+}
+
+#ifdef LOADABLE_BUILTIN
+static char *caller_doc[] = {
+N_("Returns the context of the current subroutine call.\n\
+    \n\
+    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n\
+    \"$line $subroutine $filename\"; this extra information can be used to\n\
+    provide a stack trace.\n\
+    \n\
+    The value of EXPR indicates how many call frames to go back before the\n\
+    current one; the top frame is frame 0."),
+  (char *)NULL
+};
+
+struct builtin caller_struct = {
+	"caller",
+	caller_builtin,
+	BUILTIN_ENABLED,
+	caller_doc,
+	"caller [EXPR]",
+	0
+};
+
+#endif /* LOADABLE_BUILTIN */
diff --git a/builtins/cd.def b/builtins/cd.def
new file mode 100644
index 0000000..7205608
--- /dev/null
+++ b/builtins/cd.def
@@ -0,0 +1,685 @@
+This file is cd.def, from which is created cd.c.  It implements the
+builtins "cd" and "pwd" in Bash.
+
+Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES cd.c
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include "../bashtypes.h"
+#include "posixdir.h"
+#include "posixstat.h"
+#if defined (HAVE_SYS_PARAM_H)
+#include <sys/param.h>
+#endif
+#include <fcntl.h>
+
+#include <stdio.h>
+
+#include "../bashansi.h"
+#include "../bashintl.h"
+
+#include <errno.h>
+#include <tilde/tilde.h>
+
+#include "../shell.h"
+#include "../flags.h"
+#include "maxpath.h"
+#include "common.h"
+#include "bashgetopt.h"
+
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+extern const char * const bash_getcwd_errstr;
+
+static int bindpwd PARAMS((int));
+static int setpwd PARAMS((char *));
+static char *resetpwd PARAMS((char *));
+static int change_to_directory PARAMS((char *, int, int));
+
+static int cdxattr PARAMS((char *, char **));
+static void resetxattr PARAMS((void));
+
+/* Change this to 1 to get cd spelling correction by default. */
+int cdspelling = 0;
+
+int cdable_vars;
+
+static int eflag;	/* file scope so bindpwd() can see it */
+static int xattrflag;	/* O_XATTR support for openat */
+static int xattrfd = -1;
+
+$BUILTIN cd
+$FUNCTION cd_builtin
+$SHORT_DOC cd [-L|[-P [-e]] [-@]] [dir]
+Change the shell working directory.
+
+Change the current directory to DIR.  The default DIR is the value of the
+HOME shell variable.
+
+The variable CDPATH defines the search path for the directory containing
+DIR.  Alternative directory names in CDPATH are separated by a colon (:).
+A null directory name is the same as the current directory.  If DIR begins
+with a slash (/), then CDPATH is not used.
+
+If the directory is not found, and the shell option `cdable_vars' is set,
+the word is assumed to be  a variable name.  If that variable has a value,
+its value is used for DIR.
+
+Options:
+  -L	force symbolic links to be followed: resolve symbolic
+		links in DIR after processing instances of `..'
+  -P	use the physical directory structure without following
+		symbolic links: resolve symbolic links in DIR before
+		processing instances of `..'
+  -e	if the -P option is supplied, and the current working
+		directory cannot be determined successfully, exit with
+		a non-zero status
+#if defined (O_XATTR)
+  -@	on systems that support it, present a file with extended
+		attributes as a directory containing the file attributes
+#endif
+
+The default is to follow symbolic links, as if `-L' were specified.
+`..' is processed by removing the immediately previous pathname component
+back to a slash or the beginning of DIR.
+
+Exit Status:
+Returns 0 if the directory is changed, and if $PWD is set successfully when
+-P is used; non-zero otherwise.
+$END
+
+/* Just set $PWD, don't change OLDPWD.  Used by `pwd -P' in posix mode. */
+static int
+setpwd (dirname)
+     char *dirname;
+{
+  int old_anm;
+  SHELL_VAR *tvar;
+
+  old_anm = array_needs_making;
+  tvar = bind_variable ("PWD", dirname ? dirname : "", 0);
+  if (tvar && readonly_p (tvar))
+    return EXECUTION_FAILURE;
+  if (tvar && old_anm == 0 && array_needs_making && exported_p (tvar))
+    {
+      update_export_env_inplace ("PWD=", 4, dirname ? dirname : "");
+      array_needs_making = 0;
+    }
+  return EXECUTION_SUCCESS;
+}
+
+static int
+bindpwd (no_symlinks)
+     int no_symlinks;
+{
+  char *dirname, *pwdvar;
+  int old_anm, r, canon_failed;
+  SHELL_VAR *tvar;
+
+  r = sh_chkwrite (EXECUTION_SUCCESS);
+
+#define tcwd the_current_working_directory
+  dirname = tcwd ? (no_symlinks ? sh_physpath (tcwd, 0) : tcwd)
+  		 : get_working_directory ("cd");
+#undef tcwd
+
+  /* If canonicalization fails, reset dirname to the_current_working_directory */
+  canon_failed = 0;
+  if (dirname == 0)
+    {
+      canon_failed = 1;
+      dirname = the_current_working_directory;
+    }
+
+  old_anm = array_needs_making;
+  pwdvar = get_string_value ("PWD");
+
+  tvar = bind_variable ("OLDPWD", pwdvar, 0);
+  if (tvar && readonly_p (tvar))
+    r = EXECUTION_FAILURE;
+
+  if (old_anm == 0 && array_needs_making && exported_p (tvar))
+    {
+      update_export_env_inplace ("OLDPWD=", 7, pwdvar);
+      array_needs_making = 0;
+    }
+
+  if (setpwd (dirname) == EXECUTION_FAILURE)
+    r = EXECUTION_FAILURE;
+  if (canon_failed && eflag)
+    r = EXECUTION_FAILURE;
+
+  if (dirname && dirname != the_current_working_directory)
+    free (dirname);
+
+  return (r);
+}
+
+/* Call get_working_directory to reset the value of
+   the_current_working_directory () */
+static char *
+resetpwd (caller)
+     char *caller;
+{
+  char *tdir;
+      
+  FREE (the_current_working_directory);
+  the_current_working_directory = (char *)NULL;
+  tdir = get_working_directory (caller);
+  return (tdir);
+}
+
+static int
+cdxattr (dir, ndirp)
+     char *dir;		/* don't assume we can always free DIR */
+     char **ndirp;	/* return new constructed directory name */
+{
+#if defined (O_XATTR)
+  int apfd, fd, r, e;
+  char buf[11+40+40];	/* construct new `fake' path for pwd */
+
+  apfd = openat (AT_FDCWD, dir, O_RDONLY|O_NONBLOCK);
+  if (apfd < 0)
+    return -1;
+  fd = openat (apfd, ".", O_XATTR);
+  e = errno;
+  close (apfd);		/* ignore close error for now */
+  errno = e;
+  if (fd < 0)
+    return -1;
+  r = fchdir (fd);	/* assume fchdir exists everywhere with O_XATTR */
+  if (r < 0)
+    {
+      close (fd);
+      return -1;
+    }
+  /* NFSv4 and ZFS extended attribute directories do not have names which are
+     visible in the standard Unix directory tree structure.  To ensure we have
+     a valid name for $PWD, we synthesize one under /proc, but to keep that
+     path valid, we need to keep the file descriptor open as long as we are in
+     this directory.  This imposes a certain structure on /proc. */
+  if (ndirp)
+    {
+      sprintf (buf, "/proc/%d/fd/%d", getpid(), fd);
+      *ndirp = savestring (buf);
+    }
+
+  if (xattrfd >= 0)
+    close (xattrfd);
+  xattrfd = fd;  
+
+  return r;
+#else
+  return -1;
+#endif
+}
+
+/* Clean up the O_XATTR baggage.  Currently only closes xattrfd */
+static void
+resetxattr ()
+{
+#if defined (O_XATTR)
+  if (xattrfd >= 0)
+    {
+      close (xattrfd);
+      xattrfd = -1;
+    }
+#else
+  xattrfd = -1;		/* not strictly necessary */
+#endif
+}
+
+#define LCD_DOVARS	0x001
+#define LCD_DOSPELL	0x002
+#define LCD_PRINTPATH	0x004
+#define LCD_FREEDIRNAME	0x008
+
+/* This builtin is ultimately the way that all user-visible commands should
+   change the current working directory.  It is called by cd_to_string (),
+   so the programming interface is simple, and it handles errors and
+   restrictions properly. */
+int
+cd_builtin (list)
+     WORD_LIST *list;
+{
+  char *dirname, *cdpath, *path, *temp;
+  int path_index, no_symlinks, opt, lflag, e;
+
+#if defined (RESTRICTED_SHELL)
+  if (restricted)
+    {
+      sh_restricted ((char *)NULL);
+      return (EXECUTION_FAILURE);
+    }
+#endif /* RESTRICTED_SHELL */
+
+  eflag = 0;
+  no_symlinks = no_symbolic_links;
+  xattrflag = 0;
+  reset_internal_getopt ();
+#if defined (O_XATTR)
+  while ((opt = internal_getopt (list, "eLP@")) != -1)
+#else
+  while ((opt = internal_getopt (list, "eLP")) != -1)
+#endif
+    {
+      switch (opt)
+	{
+	case 'P':
+	  no_symlinks = 1;
+	  break;
+	case 'L':
+	  no_symlinks = 0;
+	  break;
+	case 'e':
+	  eflag = 1;
+	  break;
+#if defined (O_XATTR)
+	case '@':
+	  xattrflag = 1;
+	  break;
+#endif
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+  lflag = (cdable_vars ? LCD_DOVARS : 0) |
+	  ((interactive && cdspelling) ? LCD_DOSPELL : 0);
+  if (eflag && no_symlinks == 0)
+    eflag = 0;
+
+  if (list == 0)
+    {
+      /* `cd' without arguments is equivalent to `cd $HOME' */
+      dirname = get_string_value ("HOME");
+
+      if (dirname == 0)
+	{
+	  builtin_error (_("HOME not set"));
+	  return (EXECUTION_FAILURE);
+	}
+      lflag = 0;
+    }
+#if defined (CD_COMPLAINS)
+  else if (list->next)
+    {
+      builtin_error (_("too many arguments"));
+      return (EXECUTION_FAILURE);
+    }
+#endif
+#if 0
+  else if (list->word->word[0] == '\0')
+    {
+      builtin_error (_("null directory"));
+      return (EXECUTION_FAILURE);
+    }
+#endif
+  else if (list->word->word[0] == '-' && list->word->word[1] == '\0')
+    {
+      /* This is `cd -', equivalent to `cd $OLDPWD' */
+      dirname = get_string_value ("OLDPWD");
+
+      if (dirname == 0)
+	{
+	  builtin_error (_("OLDPWD not set"));
+	  return (EXECUTION_FAILURE);
+	}
+#if 0
+      lflag = interactive ? LCD_PRINTPATH : 0;
+#else
+      lflag = LCD_PRINTPATH;		/* According to SUSv3 */
+#endif
+    }
+  else if (absolute_pathname (list->word->word))
+    dirname = list->word->word;
+  else if (privileged_mode == 0 && (cdpath = get_string_value ("CDPATH")))
+    {
+      dirname = list->word->word;
+
+      /* Find directory in $CDPATH. */
+      path_index = 0;
+      while (path = extract_colon_unit (cdpath, &path_index))
+	{
+	  /* OPT is 1 if the path element is non-empty */
+	  opt = path[0] != '\0';
+	  temp = sh_makepath (path, dirname, MP_DOTILDE);
+	  free (path);
+
+	  if (change_to_directory (temp, no_symlinks, xattrflag))
+	    {
+	      /* POSIX.2 says that if a nonempty directory from CDPATH
+		 is used to find the directory to change to, the new
+		 directory name is echoed to stdout, whether or not
+		 the shell is interactive. */
+	      if (opt && (path = no_symlinks ? temp : the_current_working_directory))
+		printf ("%s\n", path);
+
+	      free (temp);
+#if 0
+	      /* Posix.2 says that after using CDPATH, the resultant
+		 value of $PWD will not contain `.' or `..'. */
+	      return (bindpwd (posixly_correct || no_symlinks));
+#else
+	      return (bindpwd (no_symlinks));
+#endif
+	    }
+	  else
+	    free (temp);
+	}
+
+#if 0
+      /* changed for bash-4.2 Posix cd description steps 5-6 */
+      /* POSIX.2 says that if `.' does not appear in $CDPATH, we don't
+	 try the current directory, so we just punt now with an error
+	 message if POSIXLY_CORRECT is non-zero.  The check for cdpath[0]
+	 is so we don't mistakenly treat a CDPATH value of "" as not
+	 specifying the current directory. */
+      if (posixly_correct && cdpath[0])
+	{
+	  builtin_error ("%s: %s", dirname, strerror (ENOENT));
+	  return (EXECUTION_FAILURE);
+	}
+#endif
+    }
+  else
+    dirname = list->word->word;
+
+  /* When we get here, DIRNAME is the directory to change to.  If we
+     chdir successfully, just return. */
+  if (change_to_directory (dirname, no_symlinks, xattrflag))
+    {
+      if (lflag & LCD_PRINTPATH)
+	printf ("%s\n", dirname);
+      return (bindpwd (no_symlinks));
+    }
+
+  /* If the user requests it, then perhaps this is the name of
+     a shell variable, whose value contains the directory to
+     change to. */
+  if (lflag & LCD_DOVARS)
+    {
+      temp = get_string_value (dirname);
+      if (temp && change_to_directory (temp, no_symlinks, xattrflag))
+	{
+	  printf ("%s\n", temp);
+	  return (bindpwd (no_symlinks));
+	}
+    }
+
+  /* If the user requests it, try to find a directory name similar in
+     spelling to the one requested, in case the user made a simple
+     typo.  This is similar to the UNIX 8th and 9th Edition shells. */
+  if (lflag & LCD_DOSPELL)
+    {
+      temp = dirspell (dirname);
+      if (temp && change_to_directory (temp, no_symlinks, xattrflag))
+	{
+	  printf ("%s\n", temp);
+	  free (temp);
+	  return (bindpwd (no_symlinks));
+	}
+      else
+	FREE (temp);
+    }
+
+  e = errno;
+  temp = printable_filename (dirname, 0);
+  builtin_error ("%s: %s", temp, strerror (e));
+  if (temp != dirname)
+    free (temp);
+  return (EXECUTION_FAILURE);
+}
+
+$BUILTIN pwd
+$FUNCTION pwd_builtin
+$SHORT_DOC pwd [-LP]
+Print the name of the current working directory.
+
+Options:
+  -L	print the value of $PWD if it names the current working
+		directory
+  -P	print the physical directory, without any symbolic links
+
+By default, `pwd' behaves as if `-L' were specified.
+
+Exit Status:
+Returns 0 unless an invalid option is given or the current directory
+cannot be read.
+$END
+
+/* Non-zero means that pwd always prints the physical directory, without
+   symbolic links. */
+static int verbatim_pwd;
+
+/* Print the name of the current working directory. */
+int
+pwd_builtin (list)
+     WORD_LIST *list;
+{
+  char *directory;
+  int opt, pflag;
+
+  verbatim_pwd = no_symbolic_links;
+  pflag = 0;
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "LP")) != -1)
+    {
+      switch (opt)
+	{
+	case 'P':
+	  verbatim_pwd = pflag = 1;
+	  break;
+	case 'L':
+	  verbatim_pwd = 0;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+#define tcwd the_current_working_directory
+
+  directory = tcwd ? (verbatim_pwd ? sh_physpath (tcwd, 0) : tcwd)
+		   : get_working_directory ("pwd");
+
+  /* Try again using getcwd() if canonicalization fails (for instance, if
+     the file system has changed state underneath bash). */
+  if ((tcwd && directory == 0) ||
+      (posixly_correct && same_file (".", tcwd, (struct stat *)0, (struct stat *)0) == 0))
+    {
+      if (directory && directory != tcwd)
+        free (directory);
+      directory = resetpwd ("pwd");
+    }
+
+#undef tcwd
+
+  if (directory)
+    {
+      opt = EXECUTION_SUCCESS;
+      printf ("%s\n", directory);
+      /* This is dumb but posix-mandated. */
+      if (posixly_correct && pflag)
+	opt = setpwd (directory);
+      if (directory != the_current_working_directory)
+	free (directory);
+      return (sh_chkwrite (opt));
+    }
+  else
+    return (EXECUTION_FAILURE);
+}
+
+/* Do the work of changing to the directory NEWDIR.  Handle symbolic
+   link following, etc.  This function *must* return with
+   the_current_working_directory either set to NULL (in which case
+   getcwd() will eventually be called), or set to a string corresponding
+   to the working directory.  Return 1 on success, 0 on failure. */
+
+static int
+change_to_directory (newdir, nolinks, xattr)
+     char *newdir;
+     int nolinks, xattr;
+{
+  char *t, *tdir, *ndir;
+  int err, canon_failed, r, ndlen;
+
+  tdir = (char *)NULL;
+
+  if (the_current_working_directory == 0)
+    {
+      t = get_working_directory ("chdir");
+      FREE (t);
+    }
+
+  t = make_absolute (newdir, the_current_working_directory);
+
+  /* TDIR is either the canonicalized absolute pathname of NEWDIR
+     (nolinks == 0) or the absolute physical pathname of NEWDIR
+     (nolinks != 0). */
+  tdir = nolinks ? sh_physpath (t, 0)
+		 : sh_canonpath (t, PATH_CHECKDOTDOT|PATH_CHECKEXISTS);
+
+  ndlen = strlen (newdir);
+
+  /* Use the canonicalized version of NEWDIR, or, if canonicalization
+     failed, use the non-canonical form. */
+  canon_failed = 0;
+  if (tdir && *tdir)
+    free (t);
+  else
+    {
+      FREE (tdir);
+      tdir = t;
+      canon_failed = 1;
+    }
+
+  /* In POSIX mode, if we're resolving symlinks logically and sh_canonpath
+     returns NULL (because it checks the path, it will return NULL if the
+     resolved path doesn't exist), fail immediately. */
+#if defined (ENAMETOOLONG)
+  if (posixly_correct && nolinks == 0 && canon_failed && (errno != ENAMETOOLONG || ndlen > PATH_MAX))
+#else
+  if (posixly_correct && nolinks == 0 && canon_failed && ndlen > PATH_MAX)
+#endif
+    {
+#if defined ENAMETOOLONG
+      if (errno != ENOENT && errno != ENAMETOOLONG)
+#else
+      if (errno != ENOENT)
+#endif
+	errno = ENOTDIR;
+      free (tdir);
+      return (0);
+    }
+
+#if defined (O_XATTR)
+  if (xattrflag)
+    {
+      r = cdxattr (nolinks ? newdir : tdir, &ndir);
+      if (r >= 0)
+	{
+	  canon_failed = 0;
+	  free (tdir);
+	  tdir = ndir;
+	}
+      else
+	{
+	  err = errno;
+	  free (tdir);
+	  errno = err;
+	  return (0);		/* no xattr */
+	}
+    }
+  else
+#endif
+    {
+      r = chdir (nolinks ? newdir : tdir);
+      if (r >= 0)
+	resetxattr ();
+    }
+
+  /* If the chdir succeeds, update the_current_working_directory. */
+  if (r == 0)
+    {
+      /* If canonicalization failed, but the chdir succeeded, reset the
+	 shell's idea of the_current_working_directory. */
+      if (canon_failed)
+	{
+	  t = resetpwd ("cd");
+	  if (t == 0)
+	    set_working_directory (tdir);
+	  else
+	    free (t);
+	}
+      else
+	set_working_directory (tdir);
+
+      free (tdir);
+      return (1);
+    }
+
+  /* We failed to change to the appropriate directory name.  If we tried
+     what the user passed (nolinks != 0), punt now. */
+  if (nolinks)
+    {
+      free (tdir);
+      return (0);
+    }
+
+  err = errno;
+
+  /* We're not in physical mode (nolinks == 0), but we failed to change to
+     the canonicalized directory name (TDIR).  Try what the user passed
+     verbatim. If we succeed, reinitialize the_current_working_directory.
+     POSIX requires that we just fail here, so we do in posix mode. */
+  if (posixly_correct == 0 && chdir (newdir) == 0)
+    {
+      t = resetpwd ("cd");
+      if (t == 0)
+	set_working_directory (tdir);
+      else
+	free (t);
+
+      r = 1;
+    }
+  else
+    {
+      errno = err;
+      r = 0;
+    }
+
+  free (tdir);
+  return r;
+}
diff --git a/builtins/colon.def b/builtins/colon.def
new file mode 100644
index 0000000..6891b07
--- /dev/null
+++ b/builtins/colon.def
@@ -0,0 +1,76 @@
+This file is colon.def, from which is created colon.c.
+It implements the builtin ":" in Bash.
+
+Copyright (C) 1987-2019 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES colon.c
+
+$BUILTIN :
+$DOCNAME colon
+$FUNCTION colon_builtin
+$SHORT_DOC :
+Null command.
+
+No effect; the command does nothing.
+
+Exit Status:
+Always succeeds.
+$END
+
+$BUILTIN true
+$FUNCTION colon_builtin
+$SHORT_DOC true
+Return a successful result.
+
+Exit Status:
+Always succeeds.
+$END
+
+$BUILTIN false
+$FUNCTION false_builtin
+$SHORT_DOC false
+Return an unsuccessful result.
+
+Exit Status:
+Always fails.
+$END
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "../bashansi.h"
+#include "../shell.h"
+
+/* Return a successful result. */
+int
+colon_builtin (ignore)
+     WORD_LIST *ignore;
+{
+  return (0);
+}
+
+/* Return an unsuccessful result. */
+int
+false_builtin (ignore)
+     WORD_LIST *ignore;
+{
+  return (1);
+}
diff --git a/builtins/command.def b/builtins/command.def
new file mode 100644
index 0000000..acd46cc
--- /dev/null
+++ b/builtins/command.def
@@ -0,0 +1,145 @@
+This file is command.def, from which is created command.c.
+It implements the builtin "command" in Bash.
+
+Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES command.c
+
+$BUILTIN command
+$FUNCTION command_builtin
+$SHORT_DOC command [-pVv] command [arg ...]
+Execute a simple command or display information about commands.
+
+Runs COMMAND with ARGS suppressing  shell function lookup, or display
+information about the specified COMMANDs.  Can be used to invoke commands
+on disk when a function with the same name exists.
+
+Options:
+  -p    use a default value for PATH that is guaranteed to find all of
+        the standard utilities
+  -v    print a description of COMMAND similar to the `type' builtin
+  -V    print a more verbose description of each COMMAND
+
+Exit Status:
+Returns exit status of COMMAND, or failure if COMMAND is not found.
+$END
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include "../bashansi.h"
+
+#include "../shell.h"
+#include "../execute_cmd.h"
+#include "../flags.h"
+#include "bashgetopt.h"
+#include "common.h"
+
+#if defined (_CS_PATH) && defined (HAVE_CONFSTR) && !HAVE_DECL_CONFSTR
+extern size_t confstr PARAMS((int, char *, size_t));
+#endif
+
+/* Run the commands mentioned in LIST without paying attention to shell
+   functions. */
+int
+command_builtin (list)
+     WORD_LIST *list;
+{
+  int result, verbose, use_standard_path, opt;
+  COMMAND *command;
+
+  verbose = use_standard_path = 0;
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "pvV")) != -1)
+    {
+      switch (opt)
+	{
+	case 'p':
+	  use_standard_path = CDESC_STDPATH;
+	  break;
+	case 'V':
+	  verbose = CDESC_SHORTDESC|CDESC_ABSPATH;	/* look in common.h for constants */
+	  break;
+	case 'v':
+	  verbose = CDESC_REUSABLE;	/* ditto */
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+  if (list == 0)
+    return (EXECUTION_SUCCESS);
+
+#if defined (RESTRICTED_SHELL)
+  if (use_standard_path && restricted)
+    {
+      sh_restricted ("-p");
+      return (EXECUTION_FAILURE);
+    }
+#endif
+
+  if (verbose)
+    {
+      int found, any_found;
+
+      for (any_found = 0; list; list = list->next)
+	{
+	  found = describe_command (list->word->word, verbose|use_standard_path);
+
+	  if (found == 0 && verbose != CDESC_REUSABLE)
+	    sh_notfound (list->word->word);
+
+	  any_found += found;
+	}
+
+      return (any_found ? EXECUTION_SUCCESS : EXECUTION_FAILURE);
+    }
+
+  begin_unwind_frame ("command_builtin");
+
+#define COMMAND_BUILTIN_FLAGS (CMD_NO_FUNCTIONS | CMD_INHIBIT_EXPANSION | CMD_COMMAND_BUILTIN | (use_standard_path ? CMD_STDPATH : 0))
+
+#ifdef DEBUG
+  itrace("command_builtin: running execute_command for `%s'", list->word->word);
+#endif
+
+  /* We don't want this to be reparsed (consider command echo 'foo &'), so
+     just make a simple_command structure and call execute_command with it. */
+  command = make_bare_simple_command ();
+  command->value.Simple->words = (WORD_LIST *)copy_word_list (list);
+  command->value.Simple->redirects = (REDIRECT *)NULL;
+  command->flags |= COMMAND_BUILTIN_FLAGS;
+  command->value.Simple->flags |= COMMAND_BUILTIN_FLAGS;
+
+  add_unwind_protect ((char *)dispose_command, command);
+  result = execute_command (command);
+
+  run_unwind_frame ("command_builtin");
+
+  return (result);
+}
diff --git a/builtins/common.c b/builtins/common.c
new file mode 100644
index 0000000..3c9ac49
--- /dev/null
+++ b/builtins/common.c
@@ -0,0 +1,1017 @@
+/* common.c - utility functions for all builtins */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include <chartypes.h>
+#include "../bashtypes.h"
+#include "posixstat.h"
+#include <signal.h>
+
+#include <errno.h>
+
+#if defined (PREFER_STDARG)
+#  include <stdarg.h>
+#else
+#  include <varargs.h>
+#endif
+
+#include "../bashansi.h"
+#include "../bashintl.h"
+
+#define NEED_FPURGE_DECL
+
+#include "../shell.h"
+#include "maxpath.h"
+#include "../flags.h"
+#include "../parser.h"
+#include "../jobs.h"
+#include "../builtins.h"
+#include "../input.h"
+#include "../execute_cmd.h"
+#include "../trap.h"
+#include "bashgetopt.h"
+#include "common.h"
+#include "builtext.h"
+#include <tilde/tilde.h>
+
+#if defined (HISTORY)
+#  include "../bashhist.h"
+#endif
+
+#if !defined (errno)
+extern int errno;   
+#endif /* !errno */
+
+extern const char * const bash_getcwd_errstr;
+
+/* Used by some builtins and the mainline code. */
+sh_builtin_func_t *last_shell_builtin = (sh_builtin_func_t *)NULL;
+sh_builtin_func_t *this_shell_builtin = (sh_builtin_func_t *)NULL;
+
+/* **************************************************************** */
+/*								    */
+/*	     Error reporting, usage, and option processing	    */
+/*								    */
+/* **************************************************************** */
+
+/* This is a lot like report_error (), but it is for shell builtins
+   instead of shell control structures, and it won't ever exit the
+   shell. */
+
+static void
+builtin_error_prolog ()
+{
+  char *name;
+
+  name = get_name_for_error ();
+  fprintf (stderr, "%s: ", name);
+
+  if (interactive_shell == 0)
+    fprintf (stderr, _("line %d: "), executing_line_number ());
+
+  if (this_command_name && *this_command_name)
+    fprintf (stderr, "%s: ", this_command_name);
+}
+
+void
+#if defined (PREFER_STDARG)
+builtin_error (const char *format, ...)
+#else
+builtin_error (format, va_alist)
+     const char *format;
+     va_dcl
+#endif
+{
+  va_list args;
+
+  builtin_error_prolog ();
+
+  SH_VA_START (args, format);
+
+  vfprintf (stderr, format, args);
+  va_end (args);
+  fprintf (stderr, "\n");
+}
+
+void
+#if defined (PREFER_STDARG)
+builtin_warning (const char *format, ...)
+#else
+builtin_warning (format, va_alist)
+     const char *format;
+     va_dcl
+#endif
+{
+  va_list args;
+
+  builtin_error_prolog ();
+  fprintf (stderr, _("warning: "));
+
+  SH_VA_START (args, format);
+
+  vfprintf (stderr, format, args);
+  va_end (args);
+  fprintf (stderr, "\n");
+}
+
+/* Print a usage summary for the currently-executing builtin command. */
+void
+builtin_usage ()
+{
+  if (this_command_name && *this_command_name)
+    fprintf (stderr, _("%s: usage: "), this_command_name);
+  fprintf (stderr, "%s\n", _(current_builtin->short_doc));
+  fflush (stderr);
+}
+
+/* Return if LIST is NULL else barf and jump to top_level.  Used by some
+   builtins that do not accept arguments. */
+void
+no_args (list)
+     WORD_LIST *list;
+{
+  if (list)
+    {
+      builtin_error (_("too many arguments"));
+      top_level_cleanup ();
+      jump_to_top_level (DISCARD);
+    }
+}
+
+/* Check that no options were given to the currently-executing builtin,
+   and return 0 if there were options. */
+int
+no_options (list)
+     WORD_LIST *list;
+{
+  int opt;
+
+  reset_internal_getopt ();
+  if ((opt = internal_getopt (list, "")) != -1)
+    {
+      if (opt == GETOPT_HELP)
+	{
+	  builtin_help ();
+	  return (2);
+	}
+      builtin_usage ();
+      return (1);
+    }
+  return (0);
+}
+
+void
+sh_needarg (s)
+     char *s;
+{
+  builtin_error (_("%s: option requires an argument"), s);
+}
+
+void
+sh_neednumarg (s)
+     char *s;
+{
+  builtin_error (_("%s: numeric argument required"), s);
+}
+
+void
+sh_notfound (s)
+     char *s;
+{
+  builtin_error (_("%s: not found"), s);
+}
+
+/* Function called when one of the builtin commands detects an invalid
+   option. */
+void
+sh_invalidopt (s)
+     char *s;
+{
+  builtin_error (_("%s: invalid option"), s);
+}
+
+void
+sh_invalidoptname (s)
+     char *s;
+{
+  builtin_error (_("%s: invalid option name"), s);
+}
+
+void
+sh_invalidid (s)
+     char *s;
+{
+  builtin_error (_("`%s': not a valid identifier"), s);
+}
+
+void
+sh_invalidnum (s)
+     char *s;
+{
+  char *msg;
+
+  if (*s == '0' && isdigit ((unsigned char)s[1]))
+    msg = _("invalid octal number");
+  else if (*s == '0' && s[1] == 'x')
+    msg = _("invalid hex number");
+  else
+    msg = _("invalid number");
+  builtin_error ("%s: %s", s, msg);
+}
+
+void
+sh_invalidsig (s)
+     char *s;
+{
+  builtin_error (_("%s: invalid signal specification"), s);
+}
+
+void
+sh_badpid (s)
+     char *s;
+{
+  builtin_error (_("`%s': not a pid or valid job spec"), s);
+}
+
+void
+sh_readonly (s)
+     const char *s;
+{
+  builtin_error (_("%s: readonly variable"), s);
+}
+
+void
+sh_erange (s, desc)
+     char *s, *desc;
+{
+  if (s)
+    builtin_error (_("%s: %s out of range"), s, desc ? desc : _("argument"));
+  else
+    builtin_error (_("%s out of range"), desc ? desc : _("argument"));
+}
+
+#if defined (JOB_CONTROL)
+void
+sh_badjob (s)
+     char *s;
+{
+  builtin_error (_("%s: no such job"), s);
+}
+
+void
+sh_nojobs (s)
+     char *s;
+{
+  if (s)
+    builtin_error (_("%s: no job control"), s);
+  else
+    builtin_error (_("no job control"));
+}
+#endif
+
+#if defined (RESTRICTED_SHELL)
+void
+sh_restricted (s)
+     char *s;
+{
+  if (s)
+    builtin_error (_("%s: restricted"), s);
+  else
+    builtin_error (_("restricted"));
+}
+#endif
+
+void
+sh_notbuiltin (s)
+     char *s;
+{
+  builtin_error (_("%s: not a shell builtin"), s);
+}
+
+void
+sh_wrerror ()
+{
+#if defined (DONT_REPORT_BROKEN_PIPE_WRITE_ERRORS) && defined (EPIPE)
+  if (errno != EPIPE)
+#endif /* DONT_REPORT_BROKEN_PIPE_WRITE_ERRORS && EPIPE */
+  builtin_error (_("write error: %s"), strerror (errno));
+}
+
+void
+sh_ttyerror (set)
+     int set;
+{
+  if (set)
+    builtin_error (_("error setting terminal attributes: %s"), strerror (errno));
+  else
+    builtin_error (_("error getting terminal attributes: %s"), strerror (errno));
+}
+
+int
+sh_chkwrite (s)
+     int s;
+{
+  QUIT;
+  fflush (stdout);
+  QUIT;
+  if (ferror (stdout))
+    {
+      sh_wrerror ();
+      fpurge (stdout);
+      clearerr (stdout);
+      return (EXECUTION_FAILURE);
+    }
+  return (s);
+}
+
+/* **************************************************************** */
+/*								    */
+/*	     Shell positional parameter manipulation		    */
+/*								    */
+/* **************************************************************** */
+
+/* Convert a WORD_LIST into a C-style argv.  Return the number of elements
+   in the list in *IP, if IP is non-null.  A convenience function for
+   loadable builtins; also used by `test'. */
+char **
+make_builtin_argv (list, ip)
+     WORD_LIST *list;
+     int *ip;
+{
+  char **argv;
+
+  argv = strvec_from_word_list (list, 0, 1, ip);
+  argv[0] = this_command_name;
+  return argv;
+}
+
+/* Remember LIST in $1 ... $9, and REST_OF_ARGS.  If DESTRUCTIVE is
+   non-zero, then discard whatever the existing arguments are, else
+   only discard the ones that are to be replaced.  Set POSPARAM_COUNT
+   to the number of args assigned (length of LIST). */
+void
+remember_args (list, destructive)
+     WORD_LIST *list;
+     int destructive;
+{
+  register int i;
+
+  posparam_count = 0;
+
+  for (i = 1; i < 10; i++)
+    {
+      if ((destructive || list) && dollar_vars[i])
+	{
+	  free (dollar_vars[i]);
+	  dollar_vars[i] = (char *)NULL;
+	}
+
+      if (list)
+	{
+	  dollar_vars[posparam_count = i] = savestring (list->word->word);
+	  list = list->next;
+	}
+    }
+
+  /* If arguments remain, assign them to REST_OF_ARGS.
+     Note that copy_word_list (NULL) returns NULL, and
+     that dispose_words (NULL) does nothing. */
+  if (destructive || list)
+    {
+      dispose_words (rest_of_args);
+      rest_of_args = copy_word_list (list);
+      posparam_count += list_length (list);
+    }
+
+  if (destructive)
+    set_dollar_vars_changed ();
+
+  invalidate_cached_quoted_dollar_at ();
+}
+
+void
+shift_args (times)
+     int times;
+{
+  WORD_LIST *temp;
+  int count;
+
+  if (times <= 0)		/* caller should check */
+    return;
+
+  while (times-- > 0)
+    {
+      if (dollar_vars[1])
+	free (dollar_vars[1]);
+
+      for (count = 1; count < 9; count++)
+	dollar_vars[count] = dollar_vars[count + 1];
+
+      if (rest_of_args)
+	{
+	  temp = rest_of_args;
+	  dollar_vars[9] = savestring (temp->word->word);
+	  rest_of_args = rest_of_args->next;
+	  temp->next = (WORD_LIST *)NULL;
+	  dispose_words (temp);
+	}
+      else
+	dollar_vars[9] = (char *)NULL;
+
+      posparam_count--;
+    }
+}
+
+int
+number_of_args ()
+{
+#ifdef DEBUG
+  register WORD_LIST *list;
+  int n;
+
+  for (n = 0; n < 9 && dollar_vars[n+1]; n++)
+    ;
+  for (list = rest_of_args; list; list = list->next)
+    n++;
+
+if (n != posparam_count)
+  itrace("number_of_args: n (%d) != posparam_count (%d)", n, posparam_count);
+#endif
+
+  return posparam_count;
+}
+
+static int changed_dollar_vars;
+
+/* Have the dollar variables been reset to new values since we last
+   checked? */
+int
+dollar_vars_changed ()
+{
+  return (changed_dollar_vars);
+}
+
+void
+set_dollar_vars_unchanged ()
+{
+  changed_dollar_vars = 0;
+}
+
+void
+set_dollar_vars_changed ()
+{
+  if (variable_context)
+    changed_dollar_vars |= ARGS_FUNC;
+  else if (this_shell_builtin == set_builtin)
+    changed_dollar_vars |= ARGS_SETBLTIN;
+  else
+    changed_dollar_vars |= ARGS_INVOC;
+}
+
+/* **************************************************************** */
+/*								    */
+/*		Validating numeric input and arguments		    */
+/*								    */
+/* **************************************************************** */
+
+/* Read a numeric arg for this_command_name, the name of the shell builtin
+   that wants it.  LIST is the word list that the arg is to come from.
+   Accept only the numeric argument; report an error if other arguments
+   follow.  If FATAL is 1, call throw_to_top_level, which exits the
+   shell; if it's 2, call jump_to_top_level (DISCARD), which aborts the
+   current command; if FATAL is 0, return an indication of an invalid
+   number by setting *NUMOK == 0 and return -1. */
+int
+get_numeric_arg (list, fatal, count)
+     WORD_LIST *list;
+     int fatal;
+     intmax_t *count;
+{
+  char *arg;
+
+  if (count)
+    *count = 1;
+
+  if (list && list->word && ISOPTION (list->word->word, '-'))
+    list = list->next;
+
+  if (list)
+    {
+      arg = list->word->word;
+      if (arg == 0 || (legal_number (arg, count) == 0))
+	{
+	  sh_neednumarg (list->word->word ? list->word->word : "`'");
+	  if (fatal == 0)
+	    return 0;
+	  else if (fatal == 1)		/* fatal == 1; abort */
+	    throw_to_top_level ();
+	  else				/* fatal == 2; discard current command */
+	    {
+	      top_level_cleanup ();
+	      jump_to_top_level (DISCARD);
+	    }
+	}
+      no_args (list->next);
+    }
+
+  return (1);
+}
+
+/* Get an eight-bit status value from LIST */
+int
+get_exitstat (list)
+     WORD_LIST *list;
+{
+  int status;
+  intmax_t sval;
+  char *arg;
+
+  if (list && list->word && ISOPTION (list->word->word, '-'))
+    list = list->next;
+
+  if (list == 0)
+    {
+      /* If we're not running the DEBUG trap, the return builtin, when not
+	 given any arguments, uses the value of $? before the trap ran.  If
+	 given an argument, return uses it.  This means that the trap can't
+	 change $?.  The DEBUG trap gets to change $?, though, since that is
+	 part of its reason for existing, and because the extended debug mode
+	 does things with the return value. */
+      if (this_shell_builtin == return_builtin && running_trap > 0 && running_trap != DEBUG_TRAP+1)
+	return (trap_saved_exit_value);
+      return (last_command_exit_value);
+    }
+
+  arg = list->word->word;
+  if (arg == 0 || legal_number (arg, &sval) == 0)
+    {
+      sh_neednumarg (list->word->word ? list->word->word : "`'");
+      return EX_BADUSAGE;
+    }
+  no_args (list->next);
+
+  status = sval & 255;
+  return status;
+}
+
+/* Return the octal number parsed from STRING, or -1 to indicate
+   that the string contained a bad number. */
+int
+read_octal (string)
+     char *string;
+{
+  int result, digits;
+
+  result = digits = 0;
+  while (*string && ISOCTAL (*string))
+    {
+      digits++;
+      result = (result * 8) + (*string++ - '0');
+      if (result > 07777)
+	return -1;
+    }
+
+  if (digits == 0 || *string)
+    result = -1;
+
+  return (result);
+}
+
+/* **************************************************************** */
+/*								    */
+/*	     Manipulating the current working directory		    */
+/*								    */
+/* **************************************************************** */
+
+/* Return a consed string which is the current working directory.
+   FOR_WHOM is the name of the caller for error printing.  */
+char *the_current_working_directory = (char *)NULL;
+
+char *
+get_working_directory (for_whom)
+     char *for_whom;
+{
+  if (no_symbolic_links)
+    {
+      FREE (the_current_working_directory);
+      the_current_working_directory = (char *)NULL;
+    }
+
+  if (the_current_working_directory == 0)
+    {
+#if defined (GETCWD_BROKEN)
+      the_current_working_directory = getcwd (0, PATH_MAX);
+#else
+      the_current_working_directory = getcwd (0, 0);
+#endif
+      if (the_current_working_directory == 0)
+	{
+	  fprintf (stderr, _("%s: error retrieving current directory: %s: %s\n"),
+		   (for_whom && *for_whom) ? for_whom : get_name_for_error (),
+		   _(bash_getcwd_errstr), strerror (errno));
+	  return (char *)NULL;
+	}
+    }
+
+  return (savestring (the_current_working_directory));
+}
+
+/* Make NAME our internal idea of the current working directory. */
+void
+set_working_directory (name)
+     char *name;
+{
+  FREE (the_current_working_directory);
+  the_current_working_directory = savestring (name);
+}
+
+/* **************************************************************** */
+/*								    */
+/*	     	Job control support functions			    */
+/*								    */
+/* **************************************************************** */
+
+#if defined (JOB_CONTROL)
+int
+get_job_by_name (name, flags)
+     const char *name;
+     int flags;
+{
+  register int i, wl, cl, match, job;
+  register PROCESS *p;
+  register JOB *j;
+
+  job = NO_JOB;
+  wl = strlen (name);
+  for (i = js.j_jobslots - 1; i >= 0; i--)
+    {
+      j = get_job_by_jid (i);
+      if (j == 0 || ((flags & JM_STOPPED) && J_JOBSTATE(j) != JSTOPPED))
+        continue;
+
+      p = j->pipe;
+      do
+        {
+	  if (flags & JM_EXACT)
+	    {
+	      cl = strlen (p->command);
+	      match = STREQN (p->command, name, cl);
+	    }
+	  else if (flags & JM_SUBSTRING)
+	    match = strcasestr (p->command, name) != (char *)0;
+	  else
+	    match = STREQN (p->command, name, wl);
+
+	  if (match == 0)
+	    {
+	      p = p->next;
+	      continue;
+	    }
+	  else if (flags & JM_FIRSTMATCH)
+	    return i;		/* return first match */
+	  else if (job != NO_JOB)
+	    {
+	      if (this_shell_builtin)
+	        builtin_error (_("%s: ambiguous job spec"), name);
+	      else
+	        internal_error (_("%s: ambiguous job spec"), name);
+	      return (DUP_JOB);
+	    }
+	  else
+	    job = i;
+        }
+      while (p != j->pipe);
+    }
+
+  return (job);
+}
+
+/* Return the job spec found in LIST. */
+int
+get_job_spec (list)
+     WORD_LIST *list;
+{
+  register char *word;
+  int job, jflags;
+
+  if (list == 0)
+    return (js.j_current);
+
+  word = list->word->word;
+
+  if (*word == '\0')
+    return (NO_JOB);
+
+  if (*word == '%')
+    word++;
+
+  if (DIGIT (*word) && all_digits (word))
+    {
+      job = atoi (word);
+      return ((job < 0 || job > js.j_jobslots) ? NO_JOB : job - 1);
+    }
+
+  jflags = 0;
+  switch (*word)
+    {
+    case 0:
+    case '%':
+    case '+':
+      return (js.j_current);
+
+    case '-':
+      return (js.j_previous);
+
+    case '?':			/* Substring search requested. */
+      jflags |= JM_SUBSTRING;
+      word++;
+      /* FALLTHROUGH */
+
+    default:
+      return get_job_by_name (word, jflags);
+    }
+}
+#endif /* JOB_CONTROL */
+
+/*
+ * NOTE:  `kill' calls this function with forcecols == 0
+ */
+int
+display_signal_list (list, forcecols)
+     WORD_LIST *list;
+     int forcecols;
+{
+  register int i, column;
+  char *name;
+  int result, signum, dflags;
+  intmax_t lsignum;
+
+  result = EXECUTION_SUCCESS;
+  if (!list)
+    {
+      for (i = 1, column = 0; i < NSIG; i++)
+	{
+	  name = signal_name (i);
+	  if (STREQN (name, "SIGJUNK", 7) || STREQN (name, "Unknown", 7))
+	    continue;
+
+	  if (posixly_correct && !forcecols)
+	    {
+	      /* This is for the kill builtin.  POSIX.2 says the signal names
+		 are displayed without the `SIG' prefix. */
+	      if (STREQN (name, "SIG", 3))
+		name += 3;
+	      printf ("%s%s", name, (i == NSIG - 1) ? "" : " ");
+	    }
+	  else
+	    {
+	      printf ("%2d) %s", i, name);
+
+	      if (++column < 5)
+		printf ("\t");
+	      else
+		{
+		  printf ("\n");
+		  column = 0;
+		}
+	    }
+	}
+
+      if ((posixly_correct && !forcecols) || column != 0)
+	printf ("\n");
+      return result;
+    }
+
+  /* List individual signal names or numbers. */
+  while (list)
+    {
+      if (legal_number (list->word->word, &lsignum))
+	{
+	  /* This is specified by Posix.2 so that exit statuses can be
+	     mapped into signal numbers. */
+	  if (lsignum > 128)
+	    lsignum -= 128;
+	  if (lsignum < 0 || lsignum >= NSIG)
+	    {
+	      sh_invalidsig (list->word->word);
+	      result = EXECUTION_FAILURE;
+	      list = list->next;
+	      continue;
+	    }
+
+	  signum = lsignum;
+	  name = signal_name (signum);
+	  if (STREQN (name, "SIGJUNK", 7) || STREQN (name, "Unknown", 7))
+	    {
+	      list = list->next;
+	      continue;
+	    }
+	  /* POSIX.2 says that `kill -l signum' prints the signal name without
+	     the `SIG' prefix. */
+	  printf ("%s\n", (this_shell_builtin == kill_builtin && signum > 0) ? name + 3 : name);
+	}
+      else
+	{
+	  dflags = DSIG_NOCASE;
+	  if (posixly_correct == 0 || this_shell_builtin != kill_builtin)
+	    dflags |= DSIG_SIGPREFIX;
+	  signum = decode_signal (list->word->word, dflags);
+	  if (signum == NO_SIG)
+	    {
+	      sh_invalidsig (list->word->word);
+	      result = EXECUTION_FAILURE;
+	      list = list->next;
+	      continue;
+	    }
+	  printf ("%d\n", signum);
+	}
+      list = list->next;
+    }
+  return (result);
+}
+
+/* **************************************************************** */
+/*								    */
+/*	    Finding builtin commands and their functions	    */
+/*								    */
+/* **************************************************************** */
+
+/* Perform a binary search and return the address of the builtin function
+   whose name is NAME.  If the function couldn't be found, or the builtin
+   is disabled or has no function associated with it, return NULL.
+   Return the address of the builtin.
+   DISABLED_OKAY means find it even if the builtin is disabled. */
+struct builtin *
+builtin_address_internal (name, disabled_okay)
+     char *name;
+     int disabled_okay;
+{
+  int hi, lo, mid, j;
+
+  hi = num_shell_builtins - 1;
+  lo = 0;
+
+  while (lo <= hi)
+    {
+      mid = (lo + hi) / 2;
+
+      j = shell_builtins[mid].name[0] - name[0];
+
+      if (j == 0)
+	j = strcmp (shell_builtins[mid].name, name);
+
+      if (j == 0)
+	{
+	  /* It must have a function pointer.  It must be enabled, or we
+	     must have explicitly allowed disabled functions to be found,
+	     and it must not have been deleted. */
+	  if (shell_builtins[mid].function &&
+	      ((shell_builtins[mid].flags & BUILTIN_DELETED) == 0) &&
+	      ((shell_builtins[mid].flags & BUILTIN_ENABLED) || disabled_okay))
+	    return (&shell_builtins[mid]);
+	  else
+	    return ((struct builtin *)NULL);
+	}
+      if (j > 0)
+	hi = mid - 1;
+      else
+	lo = mid + 1;
+    }
+  return ((struct builtin *)NULL);
+}
+
+/* Return the pointer to the function implementing builtin command NAME. */
+sh_builtin_func_t *
+find_shell_builtin (name)
+     char *name;
+{
+  current_builtin = builtin_address_internal (name, 0);
+  return (current_builtin ? current_builtin->function : (sh_builtin_func_t *)NULL);
+}
+
+/* Return the address of builtin with NAME, whether it is enabled or not. */
+sh_builtin_func_t *
+builtin_address (name)
+     char *name;
+{
+  current_builtin = builtin_address_internal (name, 1);
+  return (current_builtin ? current_builtin->function : (sh_builtin_func_t *)NULL);
+}
+
+/* Return the function implementing the builtin NAME, but only if it is a
+   POSIX.2 special builtin. */
+sh_builtin_func_t *
+find_special_builtin (name)
+     char *name;
+{
+  current_builtin = builtin_address_internal (name, 0);
+  return ((current_builtin && (current_builtin->flags & SPECIAL_BUILTIN)) ?
+  			current_builtin->function :
+  			(sh_builtin_func_t *)NULL);
+}
+  
+static int
+shell_builtin_compare (sbp1, sbp2)
+     struct builtin *sbp1, *sbp2;
+{
+  int result;
+
+  if ((result = sbp1->name[0] - sbp2->name[0]) == 0)
+    result = strcmp (sbp1->name, sbp2->name);
+
+  return (result);
+}
+
+/* Sort the table of shell builtins so that the binary search will work
+   in find_shell_builtin. */
+void
+initialize_shell_builtins ()
+{
+  qsort (shell_builtins, num_shell_builtins, sizeof (struct builtin),
+    (QSFUNC *)shell_builtin_compare);
+}
+
+#if !defined (HELP_BUILTIN)
+void
+builtin_help ()
+{
+  printf ("%s: %s\n", this_command_name, _("help not available in this version"));
+}
+#endif
+
+/* **************************************************************** */
+/*								    */
+/*	    Variable assignments during builtin commands	    */
+/*								    */
+/* **************************************************************** */
+
+SHELL_VAR *
+builtin_bind_variable (name, value, flags)
+     char *name;
+     char *value;
+     int flags;
+{
+  SHELL_VAR *v;
+
+#if defined (ARRAY_VARS)
+  if (valid_array_reference (name, assoc_expand_once ? (VA_NOEXPAND|VA_ONEWORD) : 0) == 0)
+    v = bind_variable (name, value, flags);
+  else
+    v = assign_array_element (name, value, flags | (assoc_expand_once ? ASS_NOEXPAND : 0));
+#else /* !ARRAY_VARS */
+  v = bind_variable (name, value, flags);
+#endif /* !ARRAY_VARS */
+
+  if (v && readonly_p (v) == 0 && noassign_p (v) == 0)
+    VUNSETATTR (v, att_invisible);
+
+  return v;
+}
+
+/* Like check_unbind_variable, but for use by builtins (only matters for
+   error messages). */
+int
+builtin_unbind_variable (vname)
+     const char *vname;
+{
+  SHELL_VAR *v;
+
+  v = find_variable (vname);
+  if (v && readonly_p (v))
+    {
+      builtin_error (_("%s: cannot unset: readonly %s"), vname, "variable");
+      return -2;
+    }
+  else if (v && non_unsettable_p (v))
+    {
+      builtin_error (_("%s: cannot unset"), vname);
+      return -2;
+    }
+  return (unbind_variable (vname));
+}
diff --git a/builtins/common.h b/builtins/common.h
new file mode 100644
index 0000000..a4f9275
--- /dev/null
+++ b/builtins/common.h
@@ -0,0 +1,252 @@
+/* common.h -- extern declarations for functions defined in common.c. */
+
+/* Copyright (C) 1993-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if  !defined (__COMMON_H)
+#  define __COMMON_H
+
+#include "stdc.h"
+
+#define ISOPTION(s, c)	(s[0] == '-' && s[1] == c && !s[2])
+#define ISHELP(s)	(STREQ ((s), "--help"))
+
+#define CHECK_HELPOPT(l) \
+do { \
+  if ((l) && (l)->word && ISHELP((l)->word->word)) \
+    { \
+      builtin_help (); \
+      return (EX_USAGE); \
+    } \
+} while (0)
+
+#define CASE_HELPOPT \
+  case GETOPT_HELP: \
+    builtin_help (); \
+    return (EX_USAGE)
+
+/* Flag values for parse_and_execute () */
+#define SEVAL_NONINT	0x001
+#define SEVAL_INTERACT	0x002
+#define SEVAL_NOHIST	0x004
+#define SEVAL_NOFREE	0x008
+#define SEVAL_RESETLINE	0x010
+#define SEVAL_PARSEONLY	0x020
+#define SEVAL_NOLONGJMP 0x040
+#define SEVAL_FUNCDEF	0x080		/* only allow function definitions */
+#define SEVAL_ONECMD	0x100		/* only allow a single command */
+#define SEVAL_NOHISTEXP	0x200		/* inhibit history expansion */
+
+/* Flags for describe_command, shared between type.def and command.def */
+#define CDESC_ALL		0x001	/* type -a */
+#define CDESC_SHORTDESC		0x002	/* command -V */
+#define CDESC_REUSABLE		0x004	/* command -v */
+#define CDESC_TYPE		0x008	/* type -t */
+#define CDESC_PATH_ONLY		0x010	/* type -p */
+#define CDESC_FORCE_PATH	0x020	/* type -ap or type -P */
+#define CDESC_NOFUNCS		0x040	/* type -f */
+#define CDESC_ABSPATH		0x080	/* convert to absolute path, no ./ */
+#define CDESC_STDPATH		0x100	/* command -p */
+
+/* Flags for get_job_by_name */
+#define JM_PREFIX		0x01	/* prefix of job name */
+#define JM_SUBSTRING		0x02	/* substring of job name */
+#define JM_EXACT		0x04	/* match job name exactly */
+#define JM_STOPPED		0x08	/* match stopped jobs only */
+#define JM_FIRSTMATCH		0x10	/* return first matching job */
+
+/* Flags for remember_args and value of changed_dollar_vars */
+#define ARGS_NONE		0x0
+#define ARGS_INVOC		0x01
+#define ARGS_FUNC		0x02
+#define ARGS_SETBLTIN		0x04
+
+/* Maximum number of attribute letters */
+#define MAX_ATTRIBUTES		16
+
+/* Functions from common.c */
+extern void builtin_error PARAMS((const char *, ...))  __attribute__((__format__ (printf, 1, 2)));
+extern void builtin_warning PARAMS((const char *, ...))  __attribute__((__format__ (printf, 1, 2)));
+extern void builtin_usage PARAMS((void));
+extern void no_args PARAMS((WORD_LIST *));
+extern int no_options PARAMS((WORD_LIST *));
+
+/* common error message functions */
+extern void sh_needarg PARAMS((char *));
+extern void sh_neednumarg PARAMS((char *));
+extern void sh_notfound PARAMS((char *));
+extern void sh_invalidopt PARAMS((char *));
+extern void sh_invalidoptname PARAMS((char *));
+extern void sh_invalidid PARAMS((char *));
+extern void sh_invalidnum PARAMS((char *));
+extern void sh_invalidsig PARAMS((char *));
+extern void sh_erange PARAMS((char *, char *));
+extern void sh_badpid PARAMS((char *));
+extern void sh_badjob PARAMS((char *));
+extern void sh_readonly PARAMS((const char *));
+extern void sh_nojobs PARAMS((char *));
+extern void sh_restricted PARAMS((char *));
+extern void sh_notbuiltin PARAMS((char *));
+extern void sh_wrerror PARAMS((void));
+extern void sh_ttyerror PARAMS((int));
+extern int sh_chkwrite PARAMS((int));
+
+extern char **make_builtin_argv PARAMS((WORD_LIST *, int *));
+extern void remember_args PARAMS((WORD_LIST *, int));
+extern void shift_args PARAMS((int));
+extern int number_of_args PARAMS((void));
+
+extern int dollar_vars_changed PARAMS((void));
+extern void set_dollar_vars_unchanged PARAMS((void));
+extern void set_dollar_vars_changed PARAMS((void));
+
+extern int get_numeric_arg PARAMS((WORD_LIST *, int, intmax_t *));
+extern int get_exitstat PARAMS((WORD_LIST *));
+extern int read_octal PARAMS((char *));
+
+/* Keeps track of the current working directory. */
+extern char *the_current_working_directory;
+extern char *get_working_directory PARAMS((char *));
+extern void set_working_directory PARAMS((char *));
+
+#if defined (JOB_CONTROL)
+extern int get_job_by_name PARAMS((const char *, int));
+extern int get_job_spec PARAMS((WORD_LIST *));
+#endif
+extern int display_signal_list PARAMS((WORD_LIST *, int));
+
+/* It's OK to declare a function as returning a Function * without
+   providing a definition of what a `Function' is. */
+extern struct builtin *builtin_address_internal PARAMS((char *, int));
+extern sh_builtin_func_t *find_shell_builtin PARAMS((char *));
+extern sh_builtin_func_t *builtin_address PARAMS((char *));
+extern sh_builtin_func_t *find_special_builtin PARAMS((char *));
+extern void initialize_shell_builtins PARAMS((void));
+
+/* Functions from exit.def */
+extern void bash_logout PARAMS((void));
+
+/* Functions from getopts.def */
+extern void getopts_reset PARAMS((int));
+
+/* Functions from help.def */
+extern void builtin_help PARAMS((void));
+
+/* Functions from read.def */
+extern void read_tty_cleanup PARAMS((void));
+extern int read_tty_modified PARAMS((void));
+
+/* Functions from set.def */
+extern int minus_o_option_value PARAMS((char *));
+extern void list_minus_o_opts PARAMS((int, int));
+extern char **get_minus_o_opts PARAMS((void));
+extern int set_minus_o_option PARAMS((int, char *));
+
+extern void set_shellopts PARAMS((void));
+extern void parse_shellopts PARAMS((char *));
+extern void initialize_shell_options PARAMS((int));
+
+extern void reset_shell_options PARAMS((void));
+
+extern char *get_current_options PARAMS((void));
+extern void set_current_options PARAMS((const char *));
+
+/* Functions from shopt.def */
+extern void reset_shopt_options PARAMS((void));
+extern char **get_shopt_options PARAMS((void));
+
+extern int shopt_setopt PARAMS((char *, int));
+extern int shopt_listopt PARAMS((char *, int));
+
+extern int set_login_shell PARAMS((char *, int));
+
+extern void set_bashopts PARAMS((void));
+extern void parse_bashopts PARAMS((char *));
+extern void initialize_bashopts PARAMS((int));
+
+extern void set_compatibility_opts PARAMS((void));
+
+/* Functions from type.def */
+extern int describe_command PARAMS((char *, int));
+
+/* Functions from setattr.def */
+extern int set_or_show_attributes PARAMS((WORD_LIST *, int, int));
+extern int show_all_var_attributes PARAMS((int, int));
+extern int show_local_var_attributes PARAMS((int, int));
+extern int show_var_attributes PARAMS((SHELL_VAR *, int, int));
+extern int show_name_attributes PARAMS((char *, int));
+extern int show_localname_attributes PARAMS((char *, int));
+extern int show_func_attributes PARAMS((char *, int));
+extern void set_var_attribute PARAMS((char *, int, int));
+extern int var_attribute_string PARAMS((SHELL_VAR *, int, char *));
+
+/* Functions from pushd.def */
+extern char *get_dirstack_from_string PARAMS((char *));
+extern char *get_dirstack_element PARAMS((intmax_t, int));
+extern void set_dirstack_element PARAMS((intmax_t, int, char *));
+extern WORD_LIST *get_directory_stack PARAMS((int));
+
+/* Functions from evalstring.c */
+extern int parse_and_execute PARAMS((char *, const char *, int));
+extern int evalstring PARAMS((char *, const char *, int));
+extern void parse_and_execute_cleanup PARAMS((int));
+extern int parse_string PARAMS((char *, const char *, int, char **));
+extern int should_suppress_fork PARAMS((COMMAND *));
+extern int can_optimize_connection PARAMS((COMMAND *));
+extern void optimize_fork PARAMS((COMMAND *));
+extern void optimize_subshell_command PARAMS((COMMAND *));
+extern void optimize_shell_function PARAMS((COMMAND *));
+
+/* Functions from evalfile.c */
+extern int maybe_execute_file PARAMS((const char *, int));
+extern int force_execute_file PARAMS((const char *, int));
+extern int source_file PARAMS((const char *, int));
+extern int fc_execute_file PARAMS((const char *));
+
+/* variables from common.c */
+extern sh_builtin_func_t *this_shell_builtin;
+extern sh_builtin_func_t *last_shell_builtin;
+
+extern SHELL_VAR *builtin_bind_variable PARAMS((char *, char *, int));
+extern int builtin_unbind_variable PARAMS((const char *));
+
+/* variables from evalfile.c */
+extern int sourcelevel;
+
+/* variables from evalstring.c */
+extern int parse_and_execute_level;
+
+/* variables from break.def/continue.def */
+extern int breaking;
+extern int continuing;
+extern int loop_level;
+
+/* variables from read.def */
+extern int sigalrm_seen;
+
+/* variables from shift.def */
+extern int print_shift_error;
+
+/* variables from source.def */
+extern int source_searches_cwd;
+extern int source_uses_path;
+
+/* variables from wait.def */
+extern int wait_intr_flag;
+
+#endif /* !__COMMON_H */
diff --git a/builtins/complete.def b/builtins/complete.def
new file mode 100644
index 0000000..28a9ec2
--- /dev/null
+++ b/builtins/complete.def
@@ -0,0 +1,884 @@
+This file is complete.def, from which is created complete.c.
+It implements the builtins "complete", "compgen", and "compopt" in Bash.
+
+Copyright (C) 1999-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES complete.c
+
+$BUILTIN complete
+$DEPENDS_ON PROGRAMMABLE_COMPLETION
+$FUNCTION complete_builtin
+$SHORT_DOC complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [name ...]
+Specify how arguments are to be completed by Readline.
+
+For each NAME, specify how arguments are to be completed.  If no options
+are supplied, existing completion specifications are printed in a way that
+allows them to be reused as input.
+
+Options:
+  -p	print existing completion specifications in a reusable format
+  -r	remove a completion specification for each NAME, or, if no
+		NAMEs are supplied, all completion specifications
+  -D	apply the completions and actions as the default for commands
+		without any specific completion defined
+  -E	apply the completions and actions to "empty" commands --
+		completion attempted on a blank line
+  -I	apply the completions and actions to the initial (usually the
+		command) word
+
+When completion is attempted, the actions are applied in the order the
+uppercase-letter options are listed above. If multiple options are supplied,
+the -D option takes precedence over -E, and both take precedence over -I.
+
+Exit Status:
+Returns success unless an invalid option is supplied or an error occurs.
+$END
+
+#include <config.h>
+
+#include <stdio.h>
+
+#include "../bashtypes.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "../bashansi.h"
+#include "../bashintl.h"
+
+#include "../shell.h"
+#include "../builtins.h"
+#include "../pcomplete.h"
+#include "../bashline.h"
+
+#include "common.h"
+#include "bashgetopt.h"
+
+#include <readline/readline.h>
+
+#define STRDUP(x)       ((x) ? savestring (x) : (char *)NULL)
+
+/* Structure containing all the non-action (binary) options; filled in by
+   build_actions(). */
+struct _optflags {
+  int pflag;
+  int rflag;
+  int Dflag;
+  int Eflag;
+  int Iflag;
+};
+
+static int find_compact PARAMS((char *));
+static int find_compopt PARAMS((char *));
+
+static int build_actions PARAMS((WORD_LIST *, struct _optflags *, unsigned long *, unsigned long *));
+
+static int remove_cmd_completions PARAMS((WORD_LIST *));
+
+static int print_one_completion PARAMS((char *, COMPSPEC *));
+static int print_compitem PARAMS((BUCKET_CONTENTS *));
+static void print_compopts PARAMS((const char *, COMPSPEC *, int));
+static void print_all_completions PARAMS((void));
+static int print_cmd_completions PARAMS((WORD_LIST *));
+
+static void print_compoptions PARAMS((unsigned long, int));
+static void print_compactions PARAMS((unsigned long));
+static void print_arg PARAMS((const char *, const char *, int));
+static void print_cmd_name PARAMS((const char *));
+
+static char *Garg, *Warg, *Parg, *Sarg, *Xarg, *Farg, *Carg;
+
+static const struct _compacts {
+  const char * const actname;
+  unsigned long actflag;
+  int actopt;
+} compacts[] = {
+  { "alias",     CA_ALIAS,     'a' },
+  { "arrayvar",  CA_ARRAYVAR,   0 },
+  { "binding",   CA_BINDING,    0 },
+  { "builtin",   CA_BUILTIN,   'b' },
+  { "command",   CA_COMMAND,   'c' },
+  { "directory", CA_DIRECTORY, 'd' },
+  { "disabled",  CA_DISABLED,   0 },
+  { "enabled",   CA_ENABLED,    0 },
+  { "export",    CA_EXPORT,    'e' },
+  { "file",      CA_FILE,      'f' },
+  { "function",  CA_FUNCTION,   0 },
+  { "helptopic", CA_HELPTOPIC,  0 },
+  { "hostname",  CA_HOSTNAME,   0 },
+  { "group",     CA_GROUP,     'g' },
+  { "job",       CA_JOB,       'j' },
+  { "keyword",   CA_KEYWORD,   'k' },
+  { "running",   CA_RUNNING,    0 },
+  { "service",   CA_SERVICE,   's' },
+  { "setopt",    CA_SETOPT,     0 },
+  { "shopt",     CA_SHOPT,      0 },
+  { "signal",    CA_SIGNAL,     0 },
+  { "stopped",   CA_STOPPED,    0 },
+  { "user",      CA_USER,      'u' },
+  { "variable",  CA_VARIABLE,  'v' },
+  { (char *)NULL, 0, 0 },
+};
+
+/* This should be a STRING_INT_ALIST */
+static const struct _compopt {
+  const char * const optname;
+  unsigned long optflag;
+} compopts[] = {
+  { "bashdefault", COPT_BASHDEFAULT },
+  { "default",	COPT_DEFAULT },
+  { "dirnames", COPT_DIRNAMES },
+  { "filenames",COPT_FILENAMES},
+  { "noquote", COPT_NOQUOTE },
+  { "nosort", COPT_NOSORT },
+  { "nospace",	COPT_NOSPACE },
+  { "plusdirs", COPT_PLUSDIRS },
+  { (char *)NULL, 0 },
+};
+
+static int
+find_compact (name)
+     char *name;
+{
+  register int i;
+
+  for (i = 0; compacts[i].actname; i++)
+    if (STREQ (name, compacts[i].actname))
+      return i;
+  return -1;
+}
+
+static int
+find_compopt (name)
+     char *name;
+{
+  register int i;
+
+  for (i = 0; compopts[i].optname; i++)
+    if (STREQ (name, compopts[i].optname))
+      return i;
+  return -1;
+}
+
+/* Build the actions and compspec options from the options specified in LIST.
+   ACTP is a pointer to an unsigned long in which to place the bitmap of
+   actions.  OPTP is a pointer to an unsigned long in which to place the
+   bitmap of compspec options (arguments to `-o').  PP, if non-null, gets 1
+   if -p is supplied; RP, if non-null, gets 1 if -r is supplied.
+   If either is null, the corresponding option generates an error.
+   This also sets variables corresponding to options that take arguments as
+   a side effect; the caller should ensure that those variables are set to
+   NULL before calling build_actions.  Return value:
+   	EX_USAGE = bad option
+   	EXECUTION_SUCCESS = some options supplied
+   	EXECUTION_FAILURE = no options supplied
+*/
+
+static int
+build_actions (list, flagp, actp, optp)
+     WORD_LIST *list;
+     struct _optflags *flagp;
+     unsigned long *actp, *optp;
+{
+  int opt, ind, opt_given;
+  unsigned long acts, copts;
+  WORD_DESC w;
+
+  acts = copts = (unsigned long)0L;
+  opt_given = 0;
+
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "abcdefgjko:prsuvA:G:W:P:S:X:F:C:DEI")) != -1)
+    {
+      opt_given = 1;
+      switch (opt)
+	{
+	case 'r':
+	  if (flagp)
+	    {
+	      flagp->rflag = 1;
+	      break;
+	    }
+	  else
+	    {
+	      sh_invalidopt ("-r");
+	      builtin_usage ();
+	      return (EX_USAGE);
+	    }
+
+	case 'p':
+	  if (flagp)
+	    {
+	      flagp->pflag = 1;
+	      break;
+	    }
+	  else
+	    {
+	      sh_invalidopt ("-p");
+	      builtin_usage ();
+	      return (EX_USAGE);
+	    }
+
+	case 'a':
+	  acts |= CA_ALIAS;
+	  break;
+	case 'b':
+	  acts |= CA_BUILTIN;
+	  break;
+	case 'c':
+	  acts |= CA_COMMAND;
+	  break;
+	case 'd':
+	  acts |= CA_DIRECTORY;
+	  break;
+	case 'e':
+	  acts |= CA_EXPORT;
+	  break;
+	case 'f':
+	  acts |= CA_FILE;
+	  break;
+	case 'g':
+	  acts |= CA_GROUP;
+	  break;
+	case 'j':
+	  acts |= CA_JOB;
+	  break;
+	case 'k':
+	  acts |= CA_KEYWORD;
+	  break;
+	case 's':
+	  acts |= CA_SERVICE;
+	  break;
+	case 'u':
+	  acts |= CA_USER;
+	  break;
+	case 'v':
+	  acts |= CA_VARIABLE;
+	  break;
+	case 'o':
+	  ind = find_compopt (list_optarg);
+	  if (ind < 0)
+	    {
+	      sh_invalidoptname (list_optarg);
+	      return (EX_USAGE);
+	    }
+	  copts |= compopts[ind].optflag;
+	  break;
+	case 'A':
+	  ind = find_compact (list_optarg);
+	  if (ind < 0)
+	    {
+	      builtin_error (_("%s: invalid action name"), list_optarg);
+	      return (EX_USAGE);
+	    }
+	  acts |= compacts[ind].actflag;
+	  break;
+	case 'C':
+	  Carg = list_optarg;
+	  break;
+	case 'D':
+	  if (flagp)
+	    {
+	      flagp->Dflag = 1;
+	      break;
+	    }
+	  else
+	    {
+	      sh_invalidopt ("-D");
+	      builtin_usage ();
+	      return (EX_USAGE);
+	    }
+	case 'E':
+	  if (flagp)
+	    {
+	      flagp->Eflag = 1;
+	      break;
+	    }
+	  else
+	    {
+	      sh_invalidopt ("-E");
+	      builtin_usage ();
+	      return (EX_USAGE);
+	    }
+	case 'I':
+	  if (flagp)
+	    {
+	      flagp->Iflag = 1;
+	      break;
+	    }
+	  else
+	    {
+	      sh_invalidopt ("-I");
+	      builtin_usage ();
+	      return (EX_USAGE);
+	    }
+	case 'F':
+	  w.word = Farg = list_optarg;
+	  w.flags = 0;
+	  if (check_identifier (&w, posixly_correct) == 0 || strpbrk (Farg, shell_break_chars) != 0)
+	    {
+	      sh_invalidid (Farg);
+	      return (EX_USAGE);
+	    }
+	  break;
+	case 'G':
+	  Garg = list_optarg;
+	  break;
+	case 'P':
+	  Parg = list_optarg;
+	  break;
+	case 'S':
+	  Sarg = list_optarg;
+	  break;
+	case 'W':
+	  Warg = list_optarg;
+	  break;
+	case 'X':
+	  Xarg = list_optarg;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+
+  *actp = acts;
+  *optp = copts;
+
+  return (opt_given ? EXECUTION_SUCCESS : EXECUTION_FAILURE);
+}
+
+/* Add, remove, and display completion specifiers. */
+int
+complete_builtin (list)
+     WORD_LIST *list;
+{
+  int opt_given, rval;
+  unsigned long acts, copts;
+  COMPSPEC *cs;
+  struct _optflags oflags;
+  WORD_LIST *l, *wl;
+
+  if (list == 0)
+    {
+      print_all_completions ();
+      return (EXECUTION_SUCCESS);
+    }
+
+  opt_given = oflags.pflag = oflags.rflag = 0;
+  oflags.Dflag = oflags.Eflag = oflags.Iflag = 0;
+
+  acts = copts = (unsigned long)0L;
+  Garg = Warg = Parg = Sarg = Xarg = Farg = Carg = (char *)NULL;
+  cs = (COMPSPEC *)NULL;
+
+  /* Build the actions from the arguments.  Also sets the [A-Z]arg variables
+     as a side effect if they are supplied as options. */
+  rval = build_actions (list, &oflags, &acts, &copts);
+  if (rval == EX_USAGE)
+    return (rval);
+  opt_given = rval != EXECUTION_FAILURE;
+
+  list = loptend;
+
+  if (oflags.Dflag)
+    wl = make_word_list (make_bare_word (DEFAULTCMD), (WORD_LIST *)NULL);
+  else if (oflags.Eflag)
+    wl = make_word_list (make_bare_word (EMPTYCMD), (WORD_LIST *)NULL);
+  else if (oflags.Iflag)
+    wl = make_word_list (make_bare_word (INITIALWORD), (WORD_LIST *)NULL);
+  else
+    wl = (WORD_LIST *)NULL;
+
+  /* -p overrides everything else */
+  if (oflags.pflag || (list == 0 && opt_given == 0))
+    {
+      if (wl)
+	{
+	  rval = print_cmd_completions (wl);
+	  dispose_words (wl);
+	  return rval;
+	}
+      else if (list == 0)
+	{
+	  print_all_completions ();
+	  return (EXECUTION_SUCCESS);
+	}
+      return (print_cmd_completions (list));
+    }
+
+  /* next, -r overrides everything else. */
+  if (oflags.rflag)
+    {
+      if (wl)
+	{
+	  rval = remove_cmd_completions (wl);
+	  dispose_words (wl);
+	  return rval;
+	}
+      else if (list == 0)
+	{
+	  progcomp_flush ();
+	  return (EXECUTION_SUCCESS);
+	}
+      return (remove_cmd_completions (list));
+    }
+
+  if (wl == 0 && list == 0 && opt_given)
+    {
+      builtin_usage ();
+      return (EX_USAGE);
+    }
+
+  /* If we get here, we need to build a compspec and add it for each
+     remaining argument. */
+  cs = compspec_create ();
+  cs->actions = acts;
+  cs->options = copts;
+
+  cs->globpat = STRDUP (Garg);
+  cs->words = STRDUP (Warg);
+  cs->prefix = STRDUP (Parg);
+  cs->suffix = STRDUP (Sarg);
+  cs->funcname = STRDUP (Farg);
+  cs->command = STRDUP (Carg);
+  cs->filterpat = STRDUP (Xarg);
+
+  for (rval = EXECUTION_SUCCESS, l = wl ? wl : list ; l; l = l->next)
+    {
+      /* Add CS as the compspec for the specified commands. */
+      if (progcomp_insert (l->word->word, cs) == 0)
+	rval = EXECUTION_FAILURE;
+    }
+
+  dispose_words (wl);
+  return (rval);
+}
+
+static int
+remove_cmd_completions (list)
+     WORD_LIST *list;
+{
+  WORD_LIST *l;
+  int ret;
+
+  for (ret = EXECUTION_SUCCESS, l = list; l; l = l->next)
+    {
+      if (progcomp_remove (l->word->word) == 0)
+	{
+	  builtin_error (_("%s: no completion specification"), l->word->word);
+	  ret = EXECUTION_FAILURE;
+	}
+    }
+  return ret;
+}
+
+static void
+print_compoptions (copts, full)
+     unsigned long copts;
+     int full;
+{
+  const struct _compopt *co;
+
+  for (co = compopts; co->optname; co++)
+    if (copts & co->optflag)
+      printf ("-o %s ", co->optname);
+    else if (full)
+      printf ("+o %s ", co->optname);
+}
+
+static void
+print_compactions (acts)
+     unsigned long acts;
+{
+  const struct _compacts *ca;
+
+  /* simple flags first */
+  for (ca = compacts; ca->actname; ca++)
+    if (ca->actopt && (acts & ca->actflag))
+      printf ("-%c ", ca->actopt);
+
+  /* then the rest of the actions */
+  for (ca = compacts; ca->actname; ca++)
+    if (ca->actopt == 0 && (acts & ca->actflag))
+      printf ("-A %s ", ca->actname);
+}
+
+static void
+print_arg (arg, flag, quote)
+     const char *arg, *flag;
+     int quote;
+{
+  char *x;
+
+  if (arg)
+    {
+      x = quote ? sh_single_quote (arg) : (char *)arg;
+      printf ("%s %s ", flag, x);
+      if (x != arg)
+	free (x);
+    }
+}
+
+static void
+print_cmd_name (cmd)
+     const char *cmd;
+{
+  if (STREQ (cmd, DEFAULTCMD))
+    printf ("-D");
+  else if (STREQ (cmd, EMPTYCMD))
+    printf ("-E");
+  else if (STREQ (cmd, INITIALWORD))
+    printf ("-I");
+  else if (*cmd == 0)		/* XXX - can this happen? */
+    printf ("''");
+  else
+    printf ("%s", cmd);
+}
+
+static int
+print_one_completion (cmd, cs)
+     char *cmd;
+     COMPSPEC *cs;
+{
+  printf ("complete ");
+
+  print_compoptions (cs->options, 0);
+  print_compactions (cs->actions);
+
+  /* now the rest of the arguments */
+
+  /* arguments that require quoting */
+  print_arg (cs->globpat, "-G", 1);
+  print_arg (cs->words, "-W", 1);
+  print_arg (cs->prefix, "-P", 1);
+  print_arg (cs->suffix, "-S", 1);
+  print_arg (cs->filterpat, "-X", 1);
+
+  print_arg (cs->command, "-C", 1);
+
+  /* simple arguments that don't require quoting */
+  print_arg (cs->funcname, "-F", 0);
+
+  print_cmd_name (cmd);
+  printf ("\n");
+
+  return (0);
+}
+
+static void
+print_compopts (cmd, cs, full)
+     const char *cmd;
+     COMPSPEC *cs;
+     int full;
+{
+  printf ("compopt ");
+
+  print_compoptions (cs->options, full);
+  print_cmd_name (cmd);
+
+  printf ("\n");
+}
+
+static int
+print_compitem (item)
+     BUCKET_CONTENTS *item;
+{
+  COMPSPEC *cs;
+  char *cmd;
+
+  cmd = item->key;
+  cs = (COMPSPEC *)item->data;
+
+  return (print_one_completion (cmd, cs));
+}
+
+static void
+print_all_completions ()
+{
+  progcomp_walk (print_compitem);
+}
+
+static int
+print_cmd_completions (list)
+     WORD_LIST *list;
+{
+  WORD_LIST *l;
+  COMPSPEC *cs;
+  int ret;
+
+  for (ret = EXECUTION_SUCCESS, l = list; l; l = l->next)
+    {
+      cs = progcomp_search (l->word->word);
+      if (cs)
+	print_one_completion (l->word->word, cs);
+      else
+	{
+	  builtin_error (_("%s: no completion specification"), l->word->word);
+	  ret = EXECUTION_FAILURE;
+	}
+    }
+
+  return (sh_chkwrite (ret));
+}
+
+$BUILTIN compgen
+$DEPENDS_ON PROGRAMMABLE_COMPLETION
+$FUNCTION compgen_builtin
+$SHORT_DOC compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]
+Display possible completions depending on the options.
+
+Intended to be used from within a shell function generating possible
+completions.  If the optional WORD argument is supplied, matches against
+WORD are generated.
+
+Exit Status:
+Returns success unless an invalid option is supplied or an error occurs.
+$END
+
+int
+compgen_builtin (list)
+     WORD_LIST *list;
+{
+  int rval;
+  unsigned long acts, copts;
+  COMPSPEC *cs;
+  STRINGLIST *sl;
+  char *word, **matches;
+  char *old_line;
+  int old_ind;
+
+  if (list == 0)
+    return (EXECUTION_SUCCESS);
+
+  acts = copts = (unsigned long)0L;
+  Garg = Warg = Parg = Sarg = Xarg = Farg = Carg = (char *)NULL;
+  cs = (COMPSPEC *)NULL;
+
+  /* Build the actions from the arguments.  Also sets the [A-Z]arg variables
+     as a side effect if they are supplied as options. */
+  rval = build_actions (list, (struct _optflags *)NULL, &acts, &copts);
+  if (rval == EX_USAGE)
+    return (rval);
+  if (rval == EXECUTION_FAILURE)
+    return (EXECUTION_SUCCESS);
+
+  list = loptend;
+
+  word = (list && list->word) ? list->word->word : "";
+
+  if (Farg)
+    builtin_error (_("warning: -F option may not work as you expect"));
+  if (Carg)
+    builtin_error (_("warning: -C option may not work as you expect"));
+
+  /* If we get here, we need to build a compspec and evaluate it. */
+  cs = compspec_create ();
+  cs->actions = acts;
+  cs->options = copts;
+  cs->refcount = 1;
+
+  cs->globpat = STRDUP (Garg);
+  cs->words = STRDUP (Warg);
+  cs->prefix = STRDUP (Parg);
+  cs->suffix = STRDUP (Sarg);
+  cs->funcname = STRDUP (Farg);
+  cs->command = STRDUP (Carg);
+  cs->filterpat = STRDUP (Xarg);
+
+  rval = EXECUTION_FAILURE;
+
+  /* probably don't have to save these, just being safe */
+  old_line = pcomp_line;
+  old_ind = pcomp_ind;
+  pcomp_line = (char *)NULL;
+  pcomp_ind = 0;
+  sl = gen_compspec_completions (cs, "compgen", word, 0, 0, 0);
+  pcomp_line = old_line;
+  pcomp_ind = old_ind;
+
+  /* If the compspec wants the bash default completions, temporarily
+     turn off programmable completion and call the bash completion code. */
+  if ((sl == 0 || sl->list_len == 0) && (copts & COPT_BASHDEFAULT))
+    {
+      matches = bash_default_completion (word, 0, 0, 0, 0);
+      sl = completions_to_stringlist (matches);
+      strvec_dispose (matches);
+    }
+
+  /* This isn't perfect, but it's the best we can do, given what readline
+     exports from its set of completion utility functions. */
+  if ((sl == 0 || sl->list_len == 0) && (copts & COPT_DEFAULT))
+    {
+      matches = rl_completion_matches (word, rl_filename_completion_function);
+      strlist_dispose (sl);
+      sl = completions_to_stringlist (matches);
+      strvec_dispose (matches);
+    }
+
+  if (sl)
+    {
+      if (sl->list && sl->list_len)
+	{
+	  rval = EXECUTION_SUCCESS;
+	  strlist_print (sl, (char *)NULL);
+	}
+      strlist_dispose (sl);
+    }
+
+  compspec_dispose (cs);
+  return (rval);
+}
+
+$BUILTIN compopt
+$DEPENDS_ON PROGRAMMABLE_COMPLETION
+$FUNCTION compopt_builtin
+$SHORT_DOC compopt [-o|+o option] [-DEI] [name ...]
+Modify or display completion options.
+
+Modify the completion options for each NAME, or, if no NAMEs are supplied,
+the completion currently being executed.  If no OPTIONs are given, print
+the completion options for each NAME or the current completion specification.
+
+Options:
+	-o option	Set completion option OPTION for each NAME
+	-D		Change options for the "default" command completion
+	-E		Change options for the "empty" command completion
+	-I		Change options for completion on the initial word
+
+Using `+o' instead of `-o' turns off the specified option.
+
+Arguments:
+
+Each NAME refers to a command for which a completion specification must
+have previously been defined using the `complete' builtin.  If no NAMEs
+are supplied, compopt must be called by a function currently generating
+completions, and the options for that currently-executing completion
+generator are modified.
+
+Exit Status:
+Returns success unless an invalid option is supplied or NAME does not
+have a completion specification defined.
+$END
+
+int
+compopt_builtin (list)
+     WORD_LIST *list;
+{
+  int opts_on, opts_off, *opts, opt, oind, ret, Dflag, Eflag, Iflag;
+  WORD_LIST *l, *wl;
+  COMPSPEC *cs;
+
+  opts_on = opts_off = Eflag = Dflag = Iflag = 0;
+  ret = EXECUTION_SUCCESS;
+
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "+o:DEI")) != -1)
+    {
+      opts = (list_opttype == '-') ? &opts_on : &opts_off;
+
+      switch (opt)
+	{
+	case 'o':
+	  oind = find_compopt (list_optarg);
+	  if (oind < 0)
+	    {
+	      sh_invalidoptname (list_optarg);
+	      return (EX_USAGE);
+	    }
+	  *opts |= compopts[oind].optflag;
+	  break;
+	case 'D':
+	  Dflag = 1;
+	  break;
+	case 'E':
+	  Eflag = 1;
+	  break;
+	case 'I':
+	  Iflag = 1;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+  if (Dflag)
+    wl = make_word_list (make_bare_word (DEFAULTCMD), (WORD_LIST *)NULL);
+  else if (Eflag)
+    wl = make_word_list (make_bare_word (EMPTYCMD), (WORD_LIST *)NULL);
+  else if (Iflag)
+    wl = make_word_list (make_bare_word (INITIALWORD), (WORD_LIST *)NULL);
+  else
+    wl = (WORD_LIST *)NULL;
+
+  if (list == 0 && wl == 0)
+    {
+      if (RL_ISSTATE (RL_STATE_COMPLETING) == 0 || pcomp_curcs == 0)
+	{
+	  builtin_error (_("not currently executing completion function"));
+	  return (EXECUTION_FAILURE);
+	}
+      cs = pcomp_curcs;
+
+      if (opts_on == 0 && opts_off == 0)
+	{
+	  print_compopts (pcomp_curcmd, cs, 1);
+          return (sh_chkwrite (ret));
+	}
+
+      /* Set the compspec options */
+      pcomp_set_compspec_options (cs, opts_on, 1);
+      pcomp_set_compspec_options (cs, opts_off, 0);
+
+      /* And change the readline variables the options control */
+      pcomp_set_readline_variables (opts_on, 1);
+      pcomp_set_readline_variables (opts_off, 0);
+
+      return (ret);
+    }
+
+  for (l = wl ? wl : list; l; l = l->next)
+    {
+      cs = progcomp_search (l->word->word);
+      if (cs == 0)
+	{
+	  builtin_error (_("%s: no completion specification"), l->word->word);
+	  ret = EXECUTION_FAILURE;
+	  continue;
+	}
+      if (opts_on == 0 && opts_off == 0)
+	{
+	  print_compopts (l->word->word, cs, 1);
+	  continue;			/* XXX -- fill in later */
+	}
+
+      /* Set the compspec options */
+      pcomp_set_compspec_options (cs, opts_on, 1);
+      pcomp_set_compspec_options (cs, opts_off, 0);
+    }
+
+  if (wl)
+    dispose_words (wl);
+
+  return (ret);
+}
diff --git a/builtins/declare.def b/builtins/declare.def
new file mode 100644
index 0000000..21e4516
--- /dev/null
+++ b/builtins/declare.def
@@ -0,0 +1,1000 @@
+This file is declare.def, from which is created declare.c.
+It implements the builtins "declare" and "local" in Bash.
+
+Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES declare.c
+
+$BUILTIN declare
+$FUNCTION declare_builtin
+$SHORT_DOC declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]
+Set variable values and attributes.
+
+Declare variables and give them attributes.  If no NAMEs are given,
+display the attributes and values of all variables.
+
+Options:
+  -f	restrict action or display to function names and definitions
+  -F	restrict display to function names only (plus line number and
+		source file when debugging)
+  -g	create global variables when used in a shell function; otherwise
+		ignored
+  -I	if creating a local variable, inherit the attributes and value
+		of a variable with the same name at a previous scope
+  -p	display the attributes and value of each NAME
+
+Options which set attributes:
+  -a	to make NAMEs indexed arrays (if supported)
+  -A	to make NAMEs associative arrays (if supported)
+  -i	to make NAMEs have the `integer' attribute
+  -l	to convert the value of each NAME to lower case on assignment
+  -n	make NAME a reference to the variable named by its value
+  -r	to make NAMEs readonly
+  -t	to make NAMEs have the `trace' attribute
+  -u	to convert the value of each NAME to upper case on assignment
+  -x	to make NAMEs export
+
+Using `+' instead of `-' turns off the given attribute.
+
+Variables with the integer attribute have arithmetic evaluation (see
+the `let' command) performed when the variable is assigned a value.
+
+When used in a function, `declare' makes NAMEs local, as with the `local'
+command.  The `-g' option suppresses this behavior.
+
+Exit Status:
+Returns success unless an invalid option is supplied or a variable
+assignment error occurs.
+$END
+
+$BUILTIN typeset
+$FUNCTION declare_builtin
+$SHORT_DOC typeset [-aAfFgiIlnrtux] [-p] name[=value] ...
+Set variable values and attributes.
+
+A synonym for `declare'.  See `help declare'.
+$END
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+
+#include "../bashansi.h"
+#include "../bashintl.h"
+
+#include "../shell.h"
+#include "../flags.h"
+#include "common.h"
+#include "builtext.h"
+#include "bashgetopt.h"
+
+static SHELL_VAR *declare_find_variable PARAMS((const char *, int, int));
+static int declare_internal PARAMS((register WORD_LIST *, int));
+
+/* Declare or change variable attributes. */
+int
+declare_builtin (list)
+     register WORD_LIST *list;
+{
+  return (declare_internal (list, 0));
+}
+
+$BUILTIN local
+$FUNCTION local_builtin
+$SHORT_DOC local [option] name[=value] ...
+Define local variables.
+
+Create a local variable called NAME, and give it VALUE.  OPTION can
+be any option accepted by `declare'.
+
+Local variables can only be used within a function; they are visible
+only to the function where they are defined and its children.
+
+Exit Status:
+Returns success unless an invalid option is supplied, a variable
+assignment error occurs, or the shell is not executing a function.
+$END
+int
+local_builtin (list)
+     register WORD_LIST *list;
+{
+  /* Catch a straight `local --help' before checking function context */
+  if (list && list->word && STREQ (list->word->word, "--help"))
+    {
+      builtin_help ();
+      return (EX_USAGE);
+    }
+    
+  if (variable_context)
+    return (declare_internal (list, 1));
+  else
+    {
+      builtin_error (_("can only be used in a function"));
+      return (EXECUTION_FAILURE);
+    }
+}
+
+#if defined (ARRAY_VARS)
+#  define DECLARE_OPTS	"+acfgilnprtuxAFGI"
+#else
+#  define DECLARE_OPTS	"+cfgilnprtuxFGI"
+#endif
+
+static SHELL_VAR *
+declare_find_variable (name, mkglobal, chklocal)
+     const char *name;
+     int mkglobal, chklocal;
+{
+  SHELL_VAR *var;
+
+  if (mkglobal == 0)
+    return (find_variable (name));
+  else if (chklocal)
+    {
+      var = find_variable (name);
+      if (var && local_p (var) && var->context == variable_context)
+	return var;
+      return (find_global_variable (name));
+    }
+  else
+    return (find_global_variable (name));
+}
+
+/* The workhorse function. */
+static int
+declare_internal (list, local_var)
+     register WORD_LIST *list;
+     int local_var;
+{
+  int flags_on, flags_off, *flags;
+  int any_failed, assign_error, pflag, nodefs, opt, onref, offref;
+  int mkglobal, chklocal, inherit_flag;
+  char *t, *subscript_start;
+  SHELL_VAR *var, *refvar, *v;
+  FUNCTION_DEF *shell_fn;
+
+  flags_on = flags_off = any_failed = assign_error = pflag = nodefs = 0;
+  mkglobal = chklocal = inherit_flag = 0;
+  refvar = (SHELL_VAR *)NULL;
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, DECLARE_OPTS)) != -1)
+    {
+      flags = list_opttype == '+' ? &flags_off : &flags_on;
+
+      /* If you add options here, see whether or not they need to be added to
+	 the loop in subst.c:shell_expand_word_list() */
+      switch (opt)
+	{
+	case 'a':
+#if defined (ARRAY_VARS)
+	  *flags |= att_array;
+	  break;
+#else
+	  builtin_usage ();
+	  return (EX_USAGE);
+#endif
+	case 'A':
+#if defined (ARRAY_VARS)
+	  *flags |= att_assoc;
+	  break;
+#else
+	  builtin_usage ();
+	  return (EX_USAGE);
+#endif
+	case 'p':
+/*	  if (local_var == 0) */
+	    pflag++;
+	  break;
+        case 'F':
+	  nodefs++;
+	  *flags |= att_function;
+	  break;
+	case 'f':
+	  *flags |= att_function;
+	  break;
+	case 'G':
+	  if (flags == &flags_on)
+	    chklocal = 1;
+	  /*FALLTHROUGH*/
+	case 'g':
+	  if (flags == &flags_on)
+	    mkglobal = 1;
+	  break;
+	case 'i':
+	  *flags |= att_integer;
+	  break;
+	case 'n':
+	  *flags |= att_nameref;
+	  break;
+	case 'r':
+	  *flags |= att_readonly;
+	  break;
+	case 't':
+	  *flags |= att_trace;
+	  break;
+	case 'x':
+	  *flags |= att_exported;
+	  array_needs_making = 1;
+	  break;
+#if defined (CASEMOD_ATTRS)
+#  if defined (CASEMOD_CAPCASE)
+	 case 'c':
+	  *flags |= att_capcase;
+	  if (flags == &flags_on)
+	    flags_off |= att_uppercase|att_lowercase;
+	  break;
+#  endif
+	case 'l':
+	  *flags |= att_lowercase;
+	  if (flags == &flags_on)
+	    flags_off |= att_capcase|att_uppercase;
+	  break;
+	case 'u':
+	  *flags |= att_uppercase;
+	  if (flags == &flags_on)
+	    flags_off |= att_capcase|att_lowercase;
+	  break;
+#endif /* CASEMOD_ATTRS */
+	case 'I':
+	  inherit_flag = MKLOC_INHERIT;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+
+  list = loptend;
+
+  /* If there are no more arguments left, then we just want to show
+     some variables. */
+  if (list == 0)	/* declare -[aAfFirtx] */
+    {
+      /* Show local variables defined at this context level if this is
+	 the `local' builtin. */
+      if (local_var)
+	show_local_var_attributes (0, nodefs);	/* XXX - fix up args later */
+      else if (pflag && (flags_on == 0 || flags_on == att_function))
+	show_all_var_attributes (flags_on == 0, nodefs);
+      else if (flags_on == 0)
+	return (set_builtin ((WORD_LIST *)NULL));
+      else
+	set_or_show_attributes ((WORD_LIST *)NULL, flags_on, nodefs);
+
+      return (sh_chkwrite (EXECUTION_SUCCESS));
+    }
+
+  if (pflag)	/* declare -p [-aAfFirtx] name [name...] */
+    {
+      for (any_failed = 0; list; list = list->next)
+	{
+	  if (flags_on & att_function)
+	    pflag = show_func_attributes (list->word->word, nodefs);
+	  else if (local_var)
+	    pflag = show_localname_attributes (list->word->word, nodefs);
+	  else
+	    pflag = show_name_attributes (list->word->word, nodefs);
+	  if (pflag)
+	    {
+	      sh_notfound (list->word->word);
+	      any_failed++;
+	    }
+	}
+      return (sh_chkwrite (any_failed ? EXECUTION_FAILURE : EXECUTION_SUCCESS));
+    }
+
+#define NEXT_VARIABLE() free (name); list = list->next; continue
+
+  /* There are arguments left, so we are making variables. */
+  while (list)		/* declare [-aAfFirx] name [name ...] */
+    {
+      char *value, *name, *oldname;
+      int offset, aflags, wflags, created_var, namelen;
+      int assoc_noexpand;
+#if defined (ARRAY_VARS)
+      int making_array_special, compound_array_assign, simple_array_assign;
+      int var_exists, array_exists, creating_array, array_subscript_assignment;
+#endif
+
+      name = savestring (list->word->word);
+      wflags = list->word->flags;
+#if defined (ARRAY_VARS)
+      assoc_noexpand = assoc_expand_once && (wflags & W_ASSIGNMENT);
+#else
+      assoc_noexpand = 0;
+#endif
+      offset = assignment (name, assoc_noexpand ? 2 : 0);
+      aflags = 0;
+      created_var = 0;
+
+      if (local_var && variable_context && STREQ (name, "-"))
+	{
+	  var = make_local_variable ("-", 0);
+	  FREE (value_cell (var));		/* just in case */
+	  value = get_current_options ();
+	  var_setvalue (var, value);
+	  VSETATTR (var, att_invisible);
+	  NEXT_VARIABLE ();
+	}
+
+      if (offset)	/* declare [-aAfFirx] name=value */
+	{
+	  name[offset] = '\0';
+	  value = name + offset + 1;
+	  if (name[offset - 1] == '+')
+	    {
+	      aflags |= ASS_APPEND;
+	      name[offset - 1] = '\0';
+	    }
+	}
+      else
+	value = "";
+
+      /* Do some lexical error checking on the LHS and RHS of the assignment
+	 that is specific to nameref variables. */
+      if (flags_on & att_nameref)
+	{
+#if defined (ARRAY_VARS)
+	  if (valid_array_reference (name, 0))
+	    {
+	      builtin_error (_("%s: reference variable cannot be an array"), name);
+	      assign_error++;
+	      NEXT_VARIABLE ();
+	    }
+	  else
+#endif
+	  /* disallow self references at global scope, warn at function scope */
+	  if (check_selfref (name, value, 0))
+	    {
+	      if (variable_context == 0)
+		{
+		  builtin_error (_("%s: nameref variable self references not allowed"), name);
+		  assign_error++;
+		  NEXT_VARIABLE ();
+		}
+	      else
+		builtin_warning (_("%s: circular name reference"), name);
+	    }
+#if 1
+	  if (value && *value && (aflags & ASS_APPEND) == 0 && valid_nameref_value (value, 1) == 0)
+	    {
+	      builtin_error (_("`%s': invalid variable name for name reference"), value);
+	      assign_error++;
+	      NEXT_VARIABLE ();
+	    }
+#endif
+	}
+
+restart_new_var_name:
+#if defined (ARRAY_VARS)
+      var_exists = array_exists = creating_array = 0;
+      compound_array_assign = simple_array_assign = 0;
+      array_subscript_assignment = 0;
+      subscript_start = (char *)NULL;
+      if ((t = strchr (name, '[')) && (flags_on & att_function) == 0)	/* ] */
+	{
+	  /* If offset != 0 we have already validated any array reference
+	     because assignment() calls skipsubscript() */
+	  if (offset == 0 && valid_array_reference (name, 0) == 0)
+	    {
+	      sh_invalidid (name);
+	      assign_error++;
+	      NEXT_VARIABLE ();
+	    }
+	  subscript_start = t;
+	  *t = '\0';
+	  making_array_special = 1;	/* XXX - should this check offset? */
+	  array_subscript_assignment = offset != 0;
+	}
+      else
+	making_array_special = 0;
+#endif
+
+      /* If we're in posix mode or not looking for a shell function (since
+	 shell function names don't have to be valid identifiers when the
+	 shell's not in posix mode), check whether or not the argument is a
+	 valid, well-formed shell identifier. */
+      if ((posixly_correct || (flags_on & att_function) == 0) && legal_identifier (name) == 0)
+	{
+	  sh_invalidid (name);
+	  assign_error++;
+	  NEXT_VARIABLE ();
+	}
+
+      /* If VARIABLE_CONTEXT has a non-zero value, then we are executing
+	 inside of a function.  This means we should make local variables,
+	 not global ones. */
+
+      /* XXX - this has consequences when we're making a local copy of a
+	       variable that was in the temporary environment.  Watch out
+	       for this. */
+      refvar = (SHELL_VAR *)NULL;
+      if (variable_context && mkglobal == 0 && ((flags_on & att_function) == 0))
+	{
+	  char *newname;
+
+	  /* check name for validity here? */
+	  var = find_variable (name);
+	  if (var == 0)
+	    newname = nameref_transform_name (name, ASS_MKLOCAL);
+	  else if ((flags_on & att_nameref) == 0 && (flags_off & att_nameref) == 0)
+	    {
+	      /* Ok, we're following namerefs here, so let's make sure that if
+		 we followed one, it was at the same context (see below for
+		 more details). */
+	      refvar = find_variable_last_nameref (name, 1);
+	      newname = (refvar && refvar->context != variable_context) ? name : var->name;
+	      refvar = (SHELL_VAR *)NULL;
+	    }
+	  else
+	    newname = name;	/* dealing with nameref attribute */
+
+#if defined (ARRAY_VARS)
+	  /* Pass 1 as second argument to make_local_{assoc,array}_variable
+	     return an existing {array,assoc} variable to be flagged as an
+	     error below. */
+	  if (flags_on & att_assoc)
+	    var = make_local_assoc_variable (newname, MKLOC_ARRAYOK|inherit_flag);
+	  else if ((flags_on & att_array) || making_array_special)
+	    var = make_local_array_variable (newname, MKLOC_ASSOCOK|inherit_flag);
+	  else
+#endif
+	  if (offset == 0 && (flags_on & att_nameref))
+	    {
+	      /* First look for refvar at current scope */
+	      refvar = find_variable_last_nameref (name, 1);
+	      /* VARIABLE_CONTEXT != 0, so we are attempting to create or modify
+		 the attributes for a local variable at the same scope.  If we've
+		 used a reference from a previous context to resolve VAR, we
+		 want to throw REFVAR and VAR away and create a new local var. */
+	      if (refvar && refvar->context != variable_context)
+		{
+		  refvar = 0;
+		  var = make_local_variable (name, inherit_flag);
+		}
+	      else if (refvar && refvar->context == variable_context)
+		var = refvar;
+	      /* Maybe we just want to create a new local variable */
+	      else if (var == 0 || var->context != variable_context)
+		var = make_local_variable (name, inherit_flag);
+	      /* otherwise we have a var at the right context */
+	    }
+	  else
+	    /* XXX - check name for validity here with valid_nameref_value */
+	    var = make_local_variable ((flags_on & att_nameref) ? name : newname, inherit_flag);	/* sets att_invisible for new vars */
+
+	  if (var == 0)
+	    {
+	      any_failed++;
+	      NEXT_VARIABLE ();
+	    }
+	  if (var && nameref_p (var) && readonly_p (var) && nameref_cell (var) && (flags_off & att_nameref))
+	    {
+	      sh_readonly (name);
+	      any_failed++;
+	      NEXT_VARIABLE ();
+	    }
+	}
+      else
+	var = (SHELL_VAR *)NULL;
+
+      /* If we are declaring a function, then complain about it in some way.
+	 We don't let people make functions by saying `typeset -f foo=bar'. */
+
+      /* There should be a way, however, to let people look at a particular
+	 function definition by saying `typeset -f foo'. */
+
+      if (flags_on & att_function)
+	{
+	  if (offset)	/* declare -f [-rix] foo=bar */
+	    {
+	      builtin_error (_("cannot use `-f' to make functions"));
+	      free (name);
+	      return (EXECUTION_FAILURE);
+	    }
+	  else		/* declare -f [-rx] name [name...] */
+	    {
+	      var = find_function (name);
+
+	      if (var)
+		{
+		  if (readonly_p (var) && (flags_off & att_readonly))
+		    {
+		      builtin_error (_("%s: readonly function"), name);
+		      any_failed++;
+		      NEXT_VARIABLE ();
+		    }
+		  else if (flags_on & (att_array|att_assoc))
+		    {
+		      sh_invalidopt ((flags_on & att_array) ? "-a" : "-A");
+		      any_failed++;
+		      NEXT_VARIABLE ();
+		    }
+		  /* declare -[Ff] name [name...] */
+		  if (flags_on == att_function && flags_off == 0)
+		    {
+#if defined (DEBUGGER)
+		      if (nodefs && debugging_mode)
+			{
+			  shell_fn = find_function_def (var->name);
+			  if (shell_fn)
+			    printf ("%s %d %s\n", var->name, shell_fn->line, shell_fn->source_file);
+			  else
+			    printf ("%s\n", var->name);
+			}
+		      else
+#endif /* DEBUGGER */
+			{	
+			  t = nodefs ? var->name
+				     : named_function_string (name, function_cell (var), FUNC_MULTILINE|FUNC_EXTERNAL);
+			  printf ("%s\n", t);
+			  any_failed = sh_chkwrite (any_failed);
+			}
+		    }
+		  else		/* declare -[fF] -[rx] name [name...] */
+		    {
+		      VSETATTR (var, flags_on);
+		      flags_off &= ~att_function;	/* makes no sense */
+		      VUNSETATTR (var, flags_off);
+		    }
+		}
+	      else
+		any_failed++;
+	      NEXT_VARIABLE ();
+	    }
+	}
+      else		/* declare -[aAinrx] name [name...] */
+	{
+	  /* Non-null if we just created or fetched a local variable. */
+#if 0
+	  /* This is bash-4.3 code. */
+	  /* Here's what ksh93 seems to do.  If we are modifying an existing
+	     nameref variable, we don't follow the nameref chain past the last
+	     nameref, and we set the nameref variable's value so future
+	     references to that variable will return the value of the variable
+	     we're assigning right now. */
+#else
+	  /* Here's what ksh93 seems to do as of the 2012 version: if we are
+	     using declare -n to modify the value of an existing nameref
+	     variable, don't follow the nameref chain at all and just search
+	     for a nameref at the current context.  If we have a nameref,
+	     modify its value (changing which variable it references). */
+#endif
+	  if (var == 0 && (flags_on & att_nameref))
+	    {
+	      /* See if we are trying to modify an existing nameref variable,
+		 but don't follow the nameref chain. */
+	      var = mkglobal ? find_global_variable_noref (name) : find_variable_noref (name);
+	      if (var && nameref_p (var) == 0)
+		var = 0;
+	    }
+	  /* However, if we're turning off the nameref attribute on an existing
+	     nameref variable, we first follow the nameref chain to the end,
+	     modify the value of the variable this nameref variable references
+	     if there is an assignment statement argument,
+	     *CHANGING ITS VALUE AS A SIDE EFFECT*, then turn off the nameref
+	     flag *LEAVING THE NAMEREF VARIABLE'S VALUE UNCHANGED* */
+	  else if (var == 0 && (flags_off & att_nameref))
+	    {
+	      /* See if we are trying to modify an existing nameref variable */
+	      refvar = mkglobal ? find_global_variable_last_nameref (name, 0) : find_variable_last_nameref (name, 0);
+	      if (refvar && nameref_p (refvar) == 0)
+		refvar = 0;
+	      /* If the nameref is readonly but doesn't have a value, ksh93
+		 allows the nameref attribute to be removed.  If it's readonly
+		 and has a value, even if the value doesn't reference an
+		 existing variable, we disallow the modification */
+	      if (refvar && nameref_cell (refvar) && readonly_p (refvar))
+		{
+		  sh_readonly (name);
+		  any_failed++;
+		  NEXT_VARIABLE ();
+		}
+
+	      /* If all we're doing is turning off the nameref attribute, don't
+		 bother with VAR at all, whether it exists or not. Just turn it
+		 off and go on. */
+	      if (refvar && flags_on == 0 && offset == 0 && (flags_off & ~att_nameref) == 0)
+		{
+		  VUNSETATTR (refvar, att_nameref);
+		  NEXT_VARIABLE ();
+		}
+
+	      if (refvar)
+		/* XXX - use declare_find_variable here? */
+		var = mkglobal ? find_global_variable (nameref_cell (refvar)) : find_variable (nameref_cell (refvar));
+	    }
+#if defined (ARRAY_VARS)
+	  /* If we have an array assignment to a nameref, remove the nameref
+	     attribute and go on. */
+	  else if (var == 0 && offset && array_subscript_assignment)
+	    {
+	      var = mkglobal ? find_global_variable_noref (name) : find_variable_noref (name);
+	      if (var && nameref_p (var))
+		{
+		  internal_warning (_("%s: removing nameref attribute"), name);
+		  FREE (value_cell (var));		/* XXX - bash-4.3 compat */
+		  var_setvalue (var, (char *)NULL);
+		  VUNSETATTR (var, att_nameref);
+		}
+	    }
+#endif
+
+	  /* See if we are trying to set flags or value (or create) for an
+	     existing nameref that points to a non-existent variable: e.g.,
+		declare -n foo=bar
+		unset foo	# unsets bar
+		declare -i foo
+		foo=4+4
+		declare -p foo */
+	  if (var == 0 && (mkglobal || flags_on || flags_off || offset))
+	    {
+	      refvar = mkglobal ? find_global_variable_last_nameref (name, 0) : find_variable_last_nameref (name, 0);
+	      if (refvar && nameref_p (refvar) == 0)
+		refvar = 0;
+	      if (refvar)
+		/* XXX - use declare_find_variable here? */
+		var = mkglobal ? find_global_variable (nameref_cell (refvar)) : find_variable (nameref_cell (refvar));
+	      if (refvar && var == 0)
+		{
+		  oldname = name;	/* need to free this */
+
+		  namelen = strlen (nameref_cell (refvar));
+#if defined (ARRAY_VARS)
+		  if (subscript_start)
+		    {
+		      *subscript_start = '[';		/*]*/
+		      namelen +=  strlen (subscript_start);
+		    }
+#endif
+		  name = xmalloc (namelen + 2 + strlen (value) + 1);
+		  strcpy (name, nameref_cell (refvar));
+#if defined (ARRAY_VARS)
+		  if (subscript_start)
+		    strcpy (name + strlen (nameref_cell (refvar)), subscript_start);
+#endif
+		  /* We are committed to using the new name, so reset */
+		  if (offset)
+		    {
+		      /* Rebuild assignment and restore offset and value */
+		      if (aflags & ASS_APPEND)
+			name[namelen++] = '+';
+		      name[namelen++] = '=';
+		      if (value && *value)
+			strcpy (name + namelen, value);
+		      else
+			name[namelen] = '\0';
+		      offset = assignment (name, 0);
+		      /* if offset was valid previously, but the substituting
+			 of the nameref value results in an invalid assignment,
+			 throw an invalid identifier error */
+		      if (offset == 0)
+			{
+			  free (oldname);
+			  sh_invalidid (name);
+			  assign_error++;
+			  NEXT_VARIABLE ();
+			}
+		      name[offset] = '\0';
+		      value = name + namelen;
+		    }
+		  free (oldname);
+
+		  /* OK, let's turn off the nameref attribute.
+		     Now everything else applies to VAR. */
+		  if (flags_off & att_nameref)
+		    VUNSETATTR (refvar, att_nameref);
+
+		  goto restart_new_var_name;
+		  /* NOTREACHED */
+		}
+	    }
+	  if (var == 0)
+	    var = declare_find_variable (name, mkglobal, chklocal);
+
+#if defined (ARRAY_VARS)
+	  var_exists = var != 0;
+	  array_exists = var && (array_p (var) || assoc_p (var));
+	  creating_array = flags_on & (att_array|att_assoc);
+#endif
+
+	  if (var == 0)
+	    {
+#if defined (ARRAY_VARS)
+	      if (flags_on & att_assoc)
+		{
+		  var = make_new_assoc_variable (name);
+		  if (var && offset == 0)
+		    VSETATTR (var, att_invisible);
+		}
+	      else if ((flags_on & att_array) || making_array_special)
+		{
+		  var = make_new_array_variable (name);
+		  if (var && offset == 0)
+		    VSETATTR (var, att_invisible);
+		}
+	      else
+#endif
+		{
+		  var = mkglobal ? bind_global_variable (name, (char *)NULL, ASS_FORCE) : bind_variable (name, (char *)NULL, ASS_FORCE);
+		  if (var && offset == 0)
+		    VSETATTR (var, att_invisible);
+		}
+	      if (var == 0)
+		{
+		  /* Has to appear in brackets */
+		  NEXT_VARIABLE ();
+		}
+	      created_var = 1;
+	    }
+	  /* Can't take an existing array variable and make it a nameref */
+	  else if ((array_p (var) || assoc_p (var)) && (flags_on & att_nameref))
+	    {
+	      builtin_error (_("%s: reference variable cannot be an array"), name);
+	      assign_error++;
+	      NEXT_VARIABLE ();
+	    }
+	  else if (nameref_p (var) && (flags_on & att_nameref) == 0 && (flags_off & att_nameref) == 0 && offset && valid_nameref_value (value, 1) == 0)
+	    {
+	      builtin_error (_("`%s': invalid variable name for name reference"), value);
+	      any_failed++;
+	      NEXT_VARIABLE ();
+	    }
+	  else if (flags_on & att_nameref)
+	    {
+#if 1
+	      /* Check of offset is to allow an assignment to a nameref var as
+		 part of the declare word to override existing value */
+	      if (nameref_p (var) == 0 && var_isset (var) && offset == 0 && valid_nameref_value (value_cell (var), 0) == 0)
+		{
+		  builtin_error (_("`%s': invalid variable name for name reference"), value_cell (var));
+		  any_failed++;
+		  NEXT_VARIABLE ();
+		}
+#endif
+	      if (readonly_p (var))
+		{
+		  sh_readonly (name);
+		  any_failed++;
+		  NEXT_VARIABLE ();
+		}
+	      /* ksh93 compat: turning on nameref attribute turns off -ilu */
+	      VUNSETATTR (var, att_integer|att_uppercase|att_lowercase|att_capcase);
+	    }
+
+	  /* Cannot use declare +r to turn off readonly attribute. */ 
+	  if (readonly_p (var) && (flags_off & att_readonly))
+	    {
+	      sh_readonly (name_cell (var));
+	      any_failed++;
+	      NEXT_VARIABLE ();
+	    }
+
+	  /* Cannot use declare to assign value to readonly or noassign
+	     variable. */
+	  if ((readonly_p (var) || noassign_p (var)) && offset)
+	    {
+	      if (readonly_p (var))
+		sh_readonly (name);
+	      assign_error++;
+	      NEXT_VARIABLE ();
+	    }
+
+#if defined (ARRAY_VARS)
+	  /* make declare a[2]=foo as similar to a[2]=foo as possible if
+	     a is already an array or assoc variable. */
+	  if (array_subscript_assignment && array_exists && creating_array == 0)
+	    simple_array_assign = 1;
+	  else if ((making_array_special || creating_array || array_exists) && offset)
+	    {
+	      int vlen;
+	      vlen = STRLEN (value);
+/*itrace("declare_builtin: name = %s value = %s flags = %d", name, value, wflags);*/
+	      if (shell_compatibility_level > 43 && (wflags & W_COMPASSIGN) == 0 &&
+			value[0] == '(' && value[vlen-1] == ')')
+		{
+		  /* The warning is only printed when using compound assignment
+		     to an array variable that doesn't already exist.  We use
+		     creating_array to allow things like
+		     declare -a foo$bar='(abc)' to work. */		     
+		  if (array_exists == 0 && creating_array == 0)
+		    internal_warning (_("%s: quoted compound array assignment deprecated"), list->word->word);
+		  compound_array_assign = array_exists || creating_array;
+		  simple_array_assign = making_array_special;
+		}
+	      else if (value[0] == '(' && value[vlen-1] == ')' && (shell_compatibility_level < 44 || (wflags & W_COMPASSIGN)))
+		compound_array_assign = 1;
+	      else
+		simple_array_assign = 1;
+	    }
+
+	  /* Cannot use declare +a name or declare +A name to remove an
+	     array variable. */
+	  if (((flags_off & att_array) && array_p (var)) || ((flags_off & att_assoc) && assoc_p (var)))
+	    {
+	      builtin_error (_("%s: cannot destroy array variables in this way"), name);
+	      any_failed++;
+	      NEXT_VARIABLE ();
+	    }
+
+	  if ((flags_on & att_array) && assoc_p (var))
+	    {
+	      builtin_error (_("%s: cannot convert associative to indexed array"), name);
+	      any_failed++;
+	      NEXT_VARIABLE ();
+	    }
+	  if ((flags_on & att_assoc) && array_p (var))
+	    {
+	      builtin_error (_("%s: cannot convert indexed to associative array"), name);
+	      any_failed++;
+	      NEXT_VARIABLE ();
+	    }
+
+	  /* declare -A name[[n]] makes name an associative array variable. */
+	  if (flags_on & att_assoc)
+	    {
+	      if (assoc_p (var) == 0)
+		var = convert_var_to_assoc (var);
+	    }
+	  /* declare -a name[[n]] or declare name[n] makes name an indexed
+	     array variable. */
+	  else if ((making_array_special || (flags_on & att_array)) && array_p (var) == 0 && assoc_p (var) == 0)
+	    var = convert_var_to_array (var);
+#endif /* ARRAY_VARS */
+
+	  /* XXX - we note that we are turning on nameref attribute and defer
+	     setting it until the assignment has been made so we don't do an
+	     inadvertent nameref lookup.  Might have to do the same thing for
+	     flags_off&att_nameref. */
+	  /* XXX - ksh93 makes it an error to set a readonly nameref variable
+	     using a single typeset command. */
+	  onref = (flags_on & att_nameref);
+	  flags_on &= ~att_nameref;
+#if defined (ARRAY_VARS)
+	  if (array_p (var) || assoc_p (var)
+		|| (offset && compound_array_assign)
+		|| simple_array_assign)
+	    onref = 0;		/* array variables may not be namerefs */
+#endif
+
+	  /* ksh93 seems to do this */
+	  offref = (flags_off & att_nameref);
+	  flags_off &= ~att_nameref;
+
+	  VSETATTR (var, flags_on);
+	  VUNSETATTR (var, flags_off);
+
+#if defined (ARRAY_VARS)
+	  if (offset && compound_array_assign)
+	    assign_array_var_from_string (var, value, aflags|ASS_FORCE);
+	  else if (simple_array_assign && subscript_start)
+	    {
+	      int local_aflags;
+	      /* declare [-aA] name[N]=value */
+	      *subscript_start = '[';	/* ] */
+	      /* XXX - problem here with appending */
+	      local_aflags = aflags&ASS_APPEND;
+	      local_aflags |= assoc_noexpand ? ASS_NOEXPAND : 0;
+	      var = assign_array_element (name, value, local_aflags);	/* XXX - not aflags */
+	      *subscript_start = '\0';
+	      if (var == 0)	/* some kind of assignment error */
+		{
+		  assign_error++;
+		  flags_on |= onref;
+		  flags_off |= offref;
+		  NEXT_VARIABLE ();
+		}
+	    }
+	  else if (simple_array_assign)
+	    {
+	      /* let bind_{array,assoc}_variable take care of this. */
+	      if (assoc_p (var))
+		bind_assoc_variable (var, name, savestring ("0"), value, aflags|ASS_FORCE);
+	      else
+		bind_array_variable (name, 0, value, aflags|ASS_FORCE);
+	    }
+	  else
+#endif
+	  /* XXX - no ASS_FORCE here */
+	  /* bind_variable_value duplicates the essential internals of
+	     bind_variable() */
+	  if (offset)
+	    {
+	      if (onref || nameref_p (var))
+		aflags |= ASS_NAMEREF;
+	      v = bind_variable_value (var, value, aflags);
+	      if (v == 0 && (onref || nameref_p (var)))
+		{
+		  if (valid_nameref_value (value, 1) == 0)
+		    sh_invalidid (value);
+		  assign_error++;
+		  /* XXX - unset this variable? or leave it as normal var? */
+		  if (created_var)
+		    delete_var (var->name, mkglobal ? global_variables : shell_variables);
+		  flags_on |= onref;		/* undo change from above */
+		  flags_off |= offref;
+		  NEXT_VARIABLE ();
+		}
+	    }
+
+	  /* If we found this variable in the temporary environment, as with
+	     `var=value declare -x var', make sure it is treated identically
+	     to `var=value export var'.  Do the same for `declare -r' and
+	     `readonly'.  Preserve the attributes, except for att_tempvar. */
+	  /* XXX -- should this create a variable in the global scope, or
+	     modify the local variable flags?  ksh93 has it modify the
+	     global scope.
+	     Need to handle case like in set_var_attribute where a temporary
+	     variable is in the same table as the function local vars. */
+	  if ((flags_on & (att_exported|att_readonly)) && tempvar_p (var))
+	    {
+	      SHELL_VAR *tv;
+	      char *tvalue;
+
+	      tv = find_tempenv_variable (var->name);
+	      if (tv)
+		{
+		  tvalue = var_isset (var) ? savestring (value_cell (var)) : savestring ("");
+	          tv = bind_variable (var->name, tvalue, 0);
+		  if (tv)
+		    {
+		      tv->attributes |= var->attributes & ~att_tempvar;
+		      if (tv->context > 0)
+			VSETATTR (tv, att_propagate);
+		    }
+	          free (tvalue);
+		}
+	      VSETATTR (var, att_propagate);
+	    }
+	}
+
+      /* Turn on nameref attribute we deferred above. */
+      /* XXX - should we turn on the noassign attribute for consistency with
+	 ksh93 when we turn on the nameref attribute? */
+      VSETATTR (var, onref);
+      flags_on |= onref;
+      VUNSETATTR (var, offref);
+      flags_off |= offref;
+      /* Yuck.  ksh93 compatibility.  XXX - need to investigate more but
+	 definitely happens when turning off nameref attribute on nameref
+	 (see comments above).  Under no circumstances allow this to turn
+	 off readonly attribute on readonly nameref variable. */
+      if (refvar)
+	{
+	  if (flags_off & att_readonly)
+	    flags_off &= ~att_readonly;
+ 	  VUNSETATTR (refvar, flags_off);
+	}
+
+      stupidly_hack_special_variables (name);
+
+      NEXT_VARIABLE ();
+    }
+
+  return (assign_error ? EX_BADASSIGN
+		       : ((any_failed == 0) ? EXECUTION_SUCCESS
+  					    : EXECUTION_FAILURE));
+}
diff --git a/builtins/echo.def b/builtins/echo.def
new file mode 100644
index 0000000..4e2243d
--- /dev/null
+++ b/builtins/echo.def
@@ -0,0 +1,202 @@
+This file is echo.def, from which is created echo.c.
+It implements the builtin "echo" in Bash.
+
+Copyright (C) 1987-2018 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES echo.c
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "../bashansi.h"
+
+#include <stdio.h>
+#include "../shell.h"
+
+#include "common.h"
+
+$BUILTIN echo
+$FUNCTION echo_builtin
+$DEPENDS_ON V9_ECHO
+$SHORT_DOC echo [-neE] [arg ...]
+Write arguments to the standard output.
+
+Display the ARGs, separated by a single space character and followed by a
+newline, on the standard output.
+
+Options:
+  -n	do not append a newline
+  -e	enable interpretation of the following backslash escapes
+  -E	explicitly suppress interpretation of backslash escapes
+
+`echo' interprets the following backslash-escaped characters:
+  \a	alert (bell)
+  \b	backspace
+  \c	suppress further output
+  \e	escape character
+  \E	escape character
+  \f	form feed
+  \n	new line
+  \r	carriage return
+  \t	horizontal tab
+  \v	vertical tab
+  \\	backslash
+  \0nnn	the character whose ASCII code is NNN (octal).  NNN can be
+		0 to 3 octal digits
+  \xHH	the eight-bit character whose value is HH (hexadecimal).  HH
+		can be one or two hex digits
+  \uHHHH	the Unicode character whose value is the hexadecimal value HHHH.
+		HHHH can be one to four hex digits.
+  \UHHHHHHHH the Unicode character whose value is the hexadecimal value
+		HHHHHHHH. HHHHHHHH can be one to eight hex digits.
+
+Exit Status:
+Returns success unless a write error occurs.
+$END
+
+$BUILTIN echo
+$FUNCTION echo_builtin
+$DEPENDS_ON !V9_ECHO
+$SHORT_DOC echo [-n] [arg ...]
+Write arguments to the standard output.
+
+Display the ARGs on the standard output followed by a newline.
+
+Options:
+  -n	do not append a newline
+
+Exit Status:
+Returns success unless a write error occurs.
+$END
+
+#if defined (V9_ECHO)
+#  define VALID_ECHO_OPTIONS "neE"
+#else /* !V9_ECHO */
+#  define VALID_ECHO_OPTIONS "n"
+#endif /* !V9_ECHO */
+
+/* System V machines already have a /bin/sh with a v9 behaviour.  We
+   give Bash the identical behaviour for these machines so that the
+   existing system shells won't barf.  Regrettably, the SUS v2 has
+   standardized the Sys V echo behavior.  This variable is external
+   so that we can have a `shopt' variable to control it at runtime. */
+#if defined (DEFAULT_ECHO_TO_XPG) || defined (STRICT_POSIX)
+int xpg_echo = 1;
+#else
+int xpg_echo = 0;
+#endif /* DEFAULT_ECHO_TO_XPG */
+
+/* Print the words in LIST to standard output.  If the first word is
+   `-n', then don't print a trailing newline.  We also support the
+   echo syntax from Version 9 Unix systems. */
+int
+echo_builtin (list)
+     WORD_LIST *list;
+{
+  int display_return, do_v9, i, len;
+  char *temp, *s;
+
+  do_v9 = xpg_echo;
+  display_return = 1;
+
+  if (posixly_correct && xpg_echo)
+    goto just_echo;
+
+  for (; list && (temp = list->word->word) && *temp == '-'; list = list->next)
+    {
+      /* If it appears that we are handling options, then make sure that
+	 all of the options specified are actually valid.  Otherwise, the
+	 string should just be echoed. */
+      temp++;
+
+      for (i = 0; temp[i]; i++)
+	{
+	  if (strchr (VALID_ECHO_OPTIONS, temp[i]) == 0)
+	    break;
+	}
+
+      /* echo - and echo -<nonopt> both mean to just echo the arguments. */
+      if (*temp == 0 || temp[i])
+	break;
+
+      /* All of the options in TEMP are valid options to ECHO.
+	 Handle them. */
+      while (i = *temp++)
+	{
+	  switch (i)
+	    {
+	    case 'n':
+	      display_return = 0;
+	      break;
+#if defined (V9_ECHO)
+	    case 'e':
+	      do_v9 = 1;
+	      break;
+	    case 'E':
+	      do_v9 = 0;
+	      break;
+#endif /* V9_ECHO */
+	    default:
+	      goto just_echo;	/* XXX */
+	    }
+	}
+    }
+
+just_echo:
+
+  clearerr (stdout);	/* clear error before writing and testing success */
+
+  while (list)
+    {
+      i = len = 0;
+      temp = do_v9 ? ansicstr (list->word->word, STRLEN (list->word->word), 1, &i, &len)
+		   : list->word->word;
+      if (temp)
+	{
+	  if (do_v9)
+	    {
+	      for (s = temp; len > 0; len--)
+		putchar (*s++);
+	    }
+	  else	    
+	    printf ("%s", temp);
+#if defined (SunOS5)
+	  fflush (stdout);	/* Fix for bug in SunOS 5.5 printf(3) */
+#endif
+	}
+      QUIT;
+      if (do_v9 && temp)
+	free (temp);
+      list = list->next;
+      if (i)
+	{
+	  display_return = 0;
+	  break;
+	}
+      if (list)
+	putchar(' ');
+      QUIT;
+    }
+
+  if (display_return)
+    putchar ('\n');
+
+  return (sh_chkwrite (EXECUTION_SUCCESS));
+}
diff --git a/builtins/enable.def b/builtins/enable.def
new file mode 100644
index 0000000..9d9010b
--- /dev/null
+++ b/builtins/enable.def
@@ -0,0 +1,552 @@
+This file is enable.def, from which is created enable.c.
+It implements the builtin "enable" in Bash.
+
+Copyright (C) 1987-2020 Free Software Foundation, Inc. 
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES enable.c
+
+$BUILTIN enable
+$FUNCTION enable_builtin
+$SHORT_DOC enable [-a] [-dnps] [-f filename] [name ...]
+Enable and disable shell builtins.
+
+Enables and disables builtin shell commands.  Disabling allows you to
+execute a disk command which has the same name as a shell builtin
+without using a full pathname.
+
+Options:
+  -a	print a list of builtins showing whether or not each is enabled
+  -n	disable each NAME or display a list of disabled builtins
+  -p	print the list of builtins in a reusable format
+  -s	print only the names of Posix `special' builtins
+
+Options controlling dynamic loading:
+  -f	Load builtin NAME from shared object FILENAME
+  -d	Remove a builtin loaded with -f
+
+Without options, each NAME is enabled.
+
+To use the `test' found in $PATH instead of the shell builtin
+version, type `enable -n test'.
+
+Exit Status:
+Returns success unless NAME is not a shell builtin or an error occurs.
+$END
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include "../bashansi.h"
+#include "../bashintl.h"
+
+#include "../shell.h"
+#include "../builtins.h"
+#include "../flags.h"
+#include "common.h"
+#include "bashgetopt.h"
+#include "findcmd.h"
+
+#if defined (PROGRAMMABLE_COMPLETION)
+#  include "../pcomplete.h"
+#endif
+
+#define ENABLED  1
+#define DISABLED 2
+#define SPECIAL  4
+
+#define AFLAG	0x01
+#define DFLAG	0x02
+#define FFLAG	0x04
+#define NFLAG	0x08
+#define PFLAG	0x10
+#define SFLAG	0x20
+
+#if defined (HAVE_DLOPEN) && defined (HAVE_DLSYM)
+static int dyn_load_builtin PARAMS((WORD_LIST *, int, char *));
+#endif
+
+#if defined (HAVE_DLCLOSE)
+static int dyn_unload_builtin PARAMS((char *));
+static void delete_builtin PARAMS((struct builtin *));
+static int local_dlclose PARAMS((void *));
+#endif
+
+#define STRUCT_SUFFIX	"_struct"
+/* for now */
+#define LOAD_SUFFIX	"_builtin_load"
+#define UNLOAD_SUFFIX	"_builtin_unload"
+
+static void list_some_builtins PARAMS((int));
+static int enable_shell_command PARAMS((char *, int));
+
+/* Enable/disable shell commands present in LIST.  If list is not specified,
+   then print out a list of shell commands showing which are enabled and
+   which are disabled. */
+int
+enable_builtin (list)
+     WORD_LIST *list;
+{
+  int result, flags;
+  int opt, filter;
+#if defined (HAVE_DLOPEN) && defined (HAVE_DLSYM)
+  char *filename;
+#endif
+
+  result = EXECUTION_SUCCESS;
+  flags = 0;
+
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "adnpsf:")) != -1)
+    {
+      switch (opt)
+	{
+	case 'a':
+	  flags |= AFLAG;
+	  break;
+	case 'n':
+	  flags |= NFLAG;
+	  break;
+	case 'p':
+	  flags |= PFLAG;
+	  break;
+	case 's':
+	  flags |= SFLAG;
+	  break;
+	case 'f':
+#if defined (HAVE_DLOPEN) && defined (HAVE_DLSYM)
+	  flags |= FFLAG;
+	  filename = list_optarg;
+	  break;
+#else
+	  builtin_error (_("dynamic loading not available"));
+	  return (EX_USAGE);
+#endif
+#if defined (HAVE_DLCLOSE)
+	case 'd':
+	  flags |= DFLAG;
+	  break;
+#else
+	  builtin_error (_("dynamic loading not available"));
+	  return (EX_USAGE);
+#endif /* HAVE_DLCLOSE */
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+
+  list = loptend;
+
+#if defined (RESTRICTED_SHELL)
+  /* Restricted shells cannot load new builtins. */
+  if (restricted && (flags & (FFLAG|DFLAG)))
+    {
+      sh_restricted ((char *)NULL);
+      return (EXECUTION_FAILURE);
+    }
+#endif
+
+  if (list == 0 || (flags & PFLAG))
+    {
+      filter = (flags & AFLAG) ? (ENABLED | DISABLED)
+			       : (flags & NFLAG) ? DISABLED : ENABLED;
+
+      if (flags & SFLAG)
+	filter |= SPECIAL;
+
+      list_some_builtins (filter);
+    }
+#if defined (HAVE_DLOPEN) && defined (HAVE_DLSYM)
+  else if (flags & FFLAG)
+    {
+      filter = (flags & NFLAG) ? DISABLED : ENABLED;
+      if (flags & SFLAG)
+	filter |= SPECIAL;
+
+      result = dyn_load_builtin (list, filter, filename);
+#if defined (PROGRAMMABLE_COMPLETION)
+      set_itemlist_dirty (&it_builtins);
+#endif
+    }
+#endif
+#if defined (HAVE_DLCLOSE)
+  else if (flags & DFLAG)
+    {
+      while (list)
+	{
+	  opt = dyn_unload_builtin (list->word->word);
+	  if (opt == EXECUTION_FAILURE)
+	    result = EXECUTION_FAILURE;
+	  list = list->next;
+	}
+#if defined (PROGRAMMABLE_COMPLETION)
+      set_itemlist_dirty (&it_builtins);
+#endif
+    }
+#endif
+  else
+    {
+      while (list)
+	{
+	  opt = enable_shell_command (list->word->word, flags & NFLAG);
+
+	  if (opt == EXECUTION_FAILURE)
+	    {
+	      sh_notbuiltin (list->word->word);
+	      result = EXECUTION_FAILURE;
+	    }
+	  list = list->next;
+	}
+    }
+  return (result);
+}
+
+/* List some builtins.
+   FILTER is a mask with two slots: ENABLED and DISABLED. */
+static void
+list_some_builtins (filter)
+     int filter;
+{
+  register int i;
+
+  for (i = 0; i < num_shell_builtins; i++)
+    {
+      if (shell_builtins[i].function == 0 || (shell_builtins[i].flags & BUILTIN_DELETED))
+	continue;
+
+      if ((filter & SPECIAL) &&
+	  (shell_builtins[i].flags & SPECIAL_BUILTIN) == 0)
+	continue;
+
+      if ((filter & ENABLED) && (shell_builtins[i].flags & BUILTIN_ENABLED))
+	printf ("enable %s\n", shell_builtins[i].name);
+      else if ((filter & DISABLED) &&
+	       ((shell_builtins[i].flags & BUILTIN_ENABLED) == 0))
+	printf ("enable -n %s\n", shell_builtins[i].name);
+    }
+}
+
+/* Enable the shell command NAME.  If DISABLE_P is non-zero, then
+   disable NAME instead. */
+static int
+enable_shell_command (name, disable_p)
+     char *name;
+     int disable_p;
+{
+  struct builtin *b;
+
+  b = builtin_address_internal (name, 1);
+  if (b == 0)
+    return (EXECUTION_FAILURE);
+
+  if (disable_p)
+    b->flags &= ~BUILTIN_ENABLED;
+#if defined (RESTRICTED_SHELL)
+  else if (restricted && ((b->flags & BUILTIN_ENABLED) == 0))
+    {
+      sh_restricted ((char *)NULL);
+      return (EXECUTION_FAILURE);
+    }
+#endif
+  else
+    b->flags |= BUILTIN_ENABLED;
+
+#if defined (PROGRAMMABLE_COMPLETION)
+  set_itemlist_dirty (&it_enabled);
+  set_itemlist_dirty (&it_disabled);
+#endif
+
+  return (EXECUTION_SUCCESS);
+}
+
+#if defined (HAVE_DLOPEN) && defined (HAVE_DLSYM)
+
+#if defined (HAVE_DLFCN_H)
+#  include <dlfcn.h>
+#endif
+
+static int
+dyn_load_builtin (list, flags, filename)
+     WORD_LIST *list;
+     int flags;
+     char *filename;
+{
+  WORD_LIST *l;
+  void *handle;
+  
+  int total, size, new, replaced, r;
+  char *struct_name, *name, *funcname;
+  sh_load_func_t *loadfunc;
+  struct builtin **new_builtins, *b, *new_shell_builtins, *old_builtin;
+  char *loadables_path, *load_path;
+
+  if (list == 0)
+    return (EXECUTION_FAILURE);
+
+#ifndef RTLD_LAZY
+#define RTLD_LAZY 1
+#endif
+
+  handle = 0;
+  if (absolute_program (filename) == 0)
+    {
+      loadables_path = get_string_value ("BASH_LOADABLES_PATH");
+      if (loadables_path)
+	{
+	  load_path = find_in_path (filename, loadables_path, FS_NODIRS|FS_EXEC_PREFERRED);
+	  if (load_path)
+	    {
+#if defined (_AIX)
+	      handle = dlopen (load_path, RTLD_NOW|RTLD_GLOBAL);
+#else
+	      handle = dlopen (load_path, RTLD_LAZY);
+#endif /* !_AIX */
+	      free (load_path);
+	    }
+	}
+    }
+
+  /* Fall back to current directory for now */
+  if (handle == 0)
+#if defined (_AIX)
+    handle = dlopen (filename, RTLD_NOW|RTLD_GLOBAL);
+#else
+    handle = dlopen (filename, RTLD_LAZY);
+#endif /* !_AIX */
+
+  if (handle == 0)
+    {
+      name = printable_filename (filename, 0);
+      builtin_error (_("cannot open shared object %s: %s"), name, dlerror ());
+      if (name != filename)
+	free (name);
+      return (EXECUTION_FAILURE);
+    }
+
+  for (new = 0, l = list; l; l = l->next, new++)
+    ;
+  new_builtins = (struct builtin **)xmalloc (new * sizeof (struct builtin *));
+
+  /* For each new builtin in the shared object, find it and its describing
+     structure.  If this is overwriting an existing builtin, do so, otherwise
+     save the loaded struct for creating the new list of builtins. */
+  for (replaced = new = 0; list; list = list->next)
+    {
+      name = list->word->word;
+
+      size = strlen (name);
+      struct_name = (char *)xmalloc (size + 8);
+      strcpy (struct_name, name);
+      strcpy (struct_name + size, STRUCT_SUFFIX);
+
+      old_builtin = builtin_address_internal (name, 1);
+
+      b = (struct builtin *)dlsym (handle, struct_name);
+      if (b == 0)
+	{
+	  name = printable_filename (filename, 0);
+	  builtin_error (_("cannot find %s in shared object %s: %s"),
+			  struct_name, name, dlerror ());
+	  if (name != filename)
+	    free (name);
+	  free (struct_name);
+	  continue;
+	}
+
+      funcname = xrealloc (struct_name, size + sizeof (LOAD_SUFFIX) + 1);
+      strcpy (funcname, name);
+      strcpy (funcname + size, LOAD_SUFFIX);
+
+      loadfunc = (sh_load_func_t *)dlsym (handle, funcname);
+      if (loadfunc)
+	{
+	  /* Add warning if running an init function more than once */
+	  if (old_builtin && (old_builtin->flags & STATIC_BUILTIN) == 0)
+	    builtin_warning (_("%s: dynamic builtin already loaded"), name);
+	  r = (*loadfunc) (name);
+	  if (r == 0)
+	    {
+	      builtin_error (_("load function for %s returns failure (%d): not loaded"), name, r);
+	      free (funcname);
+	      continue;
+	    }
+	}
+      free (funcname);
+
+      b->flags &= ~STATIC_BUILTIN;
+      if (flags & SPECIAL)
+	b->flags |= SPECIAL_BUILTIN;
+      b->handle = handle;
+
+      if (old_builtin)
+	{
+	  replaced++;
+	  FASTCOPY ((char *)b, (char *)old_builtin, sizeof (struct builtin));
+	}
+      else
+	  new_builtins[new++] = b;
+    }
+
+  if (replaced == 0 && new == 0)
+    {
+      free (new_builtins);
+      dlclose (handle);
+      return (EXECUTION_FAILURE);
+    }
+
+  if (new)
+    {
+      total = num_shell_builtins + new;
+      size = (total + 1) * sizeof (struct builtin);
+
+      new_shell_builtins = (struct builtin *)xmalloc (size);
+      FASTCOPY ((char *)shell_builtins, (char *)new_shell_builtins,
+		num_shell_builtins * sizeof (struct builtin));
+      for (replaced = 0; replaced < new; replaced++)
+	FASTCOPY ((char *)new_builtins[replaced],
+		  (char *)&new_shell_builtins[num_shell_builtins + replaced],
+		  sizeof (struct builtin));
+
+      new_shell_builtins[total].name = (char *)0;
+      new_shell_builtins[total].function = (sh_builtin_func_t *)0;
+      new_shell_builtins[total].flags = 0;
+
+      if (shell_builtins != static_shell_builtins)
+	free (shell_builtins);
+
+      shell_builtins = new_shell_builtins;
+      num_shell_builtins = total;
+      initialize_shell_builtins ();
+    }
+
+  free (new_builtins);
+  return (EXECUTION_SUCCESS);
+}
+#endif
+
+#if defined (HAVE_DLCLOSE)
+static void
+delete_builtin (b)
+     struct builtin *b;
+{
+  int ind, size;
+  struct builtin *new_shell_builtins;
+
+  /* XXX - funky pointer arithmetic - XXX */
+#ifdef __STDC__
+  ind = b - shell_builtins;
+#else
+  ind = ((int)b - (int)shell_builtins) / sizeof (struct builtin);
+#endif
+  size = num_shell_builtins * sizeof (struct builtin);
+  new_shell_builtins = (struct builtin *)xmalloc (size);
+
+  /* Copy shell_builtins[0]...shell_builtins[ind - 1] to new_shell_builtins */
+  if (ind)
+    FASTCOPY ((char *)shell_builtins, (char *)new_shell_builtins,
+	      ind * sizeof (struct builtin));
+  /* Copy shell_builtins[ind+1]...shell_builtins[num_shell_builtins to
+     new_shell_builtins, starting at ind. */
+  FASTCOPY ((char *)(&shell_builtins[ind+1]),
+  	    (char *)(&new_shell_builtins[ind]),
+  	    (num_shell_builtins - ind) * sizeof (struct builtin));
+
+  if (shell_builtins != static_shell_builtins)
+    free (shell_builtins);
+
+  /* The result is still sorted. */
+  num_shell_builtins--;
+  shell_builtins = new_shell_builtins;
+}
+
+/* Tenon's MachTen has a dlclose that doesn't return a value, so we
+   finesse it with a local wrapper. */
+static int
+local_dlclose (handle)
+     void *handle;
+{
+#if !defined (__MACHTEN__)
+  return (dlclose (handle));
+#else /* __MACHTEN__ */
+  dlclose (handle);
+  return ((dlerror () != NULL) ? -1 : 0);    
+#endif /* __MACHTEN__ */
+}
+
+static int
+dyn_unload_builtin (name)
+     char *name;
+{
+  struct builtin *b;
+  void *handle;
+  char *funcname;
+  sh_unload_func_t *unloadfunc;
+  int ref, i, size;
+
+  b = builtin_address_internal (name, 1);
+  if (b == 0)
+    {
+      sh_notbuiltin (name);
+      return (EXECUTION_FAILURE);
+    }
+  if (b->flags & STATIC_BUILTIN)
+    {
+      builtin_error (_("%s: not dynamically loaded"), name);
+      return (EXECUTION_FAILURE);
+    }
+
+  handle = (void *)b->handle;
+  for (ref = i = 0; i < num_shell_builtins; i++)
+    {
+      if (shell_builtins[i].handle == b->handle)
+	ref++;
+    }
+
+  /* Call any unload function */
+  size = strlen (name);
+  funcname = xmalloc (size + sizeof (UNLOAD_SUFFIX) + 1);
+  strcpy (funcname, name);
+  strcpy (funcname + size, UNLOAD_SUFFIX);
+
+  unloadfunc = (sh_unload_func_t *)dlsym (handle, funcname);
+  if (unloadfunc)
+    (*unloadfunc) (name);	/* void function */
+  free (funcname);
+
+  /* Don't remove the shared object unless the reference count of builtins
+     using it drops to zero. */
+  if (ref == 1 && local_dlclose (handle) != 0)
+    {
+      builtin_error (_("%s: cannot delete: %s"), name, dlerror ());
+      return (EXECUTION_FAILURE);
+    }
+
+  /* Now remove this entry from the builtin table and reinitialize. */
+  delete_builtin (b);
+
+  return (EXECUTION_SUCCESS);
+}
+#endif
diff --git a/builtins/eval.def b/builtins/eval.def
new file mode 100644
index 0000000..a92b538
--- /dev/null
+++ b/builtins/eval.def
@@ -0,0 +1,57 @@
+This file is eval.def, from which is created eval.c.
+It implements the builtin "eval" in Bash.
+
+Copyright (C) 1987-2016 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES eval.c
+
+$BUILTIN eval
+$FUNCTION eval_builtin
+$SHORT_DOC eval [arg ...]
+Execute arguments as a shell command.
+
+Combine ARGs into a single string, use the result as input to the shell,
+and execute the resulting commands.
+
+Exit Status:
+Returns exit status of command or success if command is null.
+$END
+
+#include <config.h>
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include "../shell.h"
+#include "bashgetopt.h"
+#include "common.h"
+
+/* Parse the string that these words make, and execute the command found. */
+int
+eval_builtin (list)
+     WORD_LIST *list;
+{
+  if (no_options (list))
+    return (EX_USAGE);
+  list = loptend;	/* skip over possible `--' */
+
+  return (list ? evalstring (string_list (list), "eval", SEVAL_NOHIST) : EXECUTION_SUCCESS);
+}
diff --git a/builtins/evalfile.c b/builtins/evalfile.c
new file mode 100644
index 0000000..fc3975e
--- /dev/null
+++ b/builtins/evalfile.c
@@ -0,0 +1,384 @@
+/* evalfile.c - read and evaluate commands from a file or file descriptor */
+
+/* Copyright (C) 1996-2017 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "../bashtypes.h"
+#include "posixstat.h"
+#include "filecntl.h"
+
+#include <stdio.h>
+#include <signal.h>
+#include <errno.h>
+
+#include "../bashansi.h"
+#include "../bashintl.h"
+
+#include "../shell.h"
+#include "../parser.h"
+#include "../jobs.h"
+#include "../builtins.h"
+#include "../flags.h"
+#include "../input.h"
+#include "../execute_cmd.h"
+#include "../trap.h"
+
+#include <y.tab.h>
+
+#if defined (HISTORY)
+#  include "../bashhist.h"
+#endif
+
+#include <typemax.h>
+
+#include "common.h"
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+/* Flags for _evalfile() */
+#define FEVAL_ENOENTOK		0x001
+#define FEVAL_BUILTIN		0x002
+#define FEVAL_UNWINDPROT	0x004
+#define FEVAL_NONINT		0x008
+#define FEVAL_LONGJMP		0x010
+#define FEVAL_HISTORY		0x020
+#define FEVAL_CHECKBINARY	0x040
+#define FEVAL_REGFILE		0x080
+#define FEVAL_NOPUSHARGS	0x100
+
+/* How many `levels' of sourced files we have. */
+int sourcelevel = 0;
+
+static int
+_evalfile (filename, flags)
+     const char *filename;
+     int flags;
+{
+  volatile int old_interactive;
+  procenv_t old_return_catch;
+  int return_val, fd, result, pflags, i, nnull;
+  ssize_t nr;			/* return value from read(2) */
+  char *string;
+  struct stat finfo;
+  size_t file_size;
+  sh_vmsg_func_t *errfunc;
+#if defined (ARRAY_VARS)
+  SHELL_VAR *funcname_v, *bash_source_v, *bash_lineno_v;
+  ARRAY *funcname_a, *bash_source_a, *bash_lineno_a;
+  struct func_array_state *fa;
+#  if defined (DEBUGGER)
+  SHELL_VAR *bash_argv_v, *bash_argc_v;
+  ARRAY *bash_argv_a, *bash_argc_a;
+#  endif
+  char *t, tt[2];
+#endif
+
+  USE_VAR(pflags);
+
+#if defined (ARRAY_VARS)
+  GET_ARRAY_FROM_VAR ("FUNCNAME", funcname_v, funcname_a);
+  GET_ARRAY_FROM_VAR ("BASH_SOURCE", bash_source_v, bash_source_a);
+  GET_ARRAY_FROM_VAR ("BASH_LINENO", bash_lineno_v, bash_lineno_a);
+#  if defined (DEBUGGER)
+  GET_ARRAY_FROM_VAR ("BASH_ARGV", bash_argv_v, bash_argv_a);
+  GET_ARRAY_FROM_VAR ("BASH_ARGC", bash_argc_v, bash_argc_a);
+#  endif
+#endif
+
+  fd = open (filename, O_RDONLY);
+
+  if (fd < 0 || (fstat (fd, &finfo) == -1))
+    {
+      i = errno;
+      if (fd >= 0)
+	close (fd);
+      errno = i;
+
+file_error_and_exit:
+      if (((flags & FEVAL_ENOENTOK) == 0) || errno != ENOENT)
+	file_error (filename);
+
+      if (flags & FEVAL_LONGJMP)
+	{
+	  last_command_exit_value = EXECUTION_FAILURE;
+	  jump_to_top_level (EXITPROG);
+	}
+
+      return ((flags & FEVAL_BUILTIN) ? EXECUTION_FAILURE
+      				      : ((errno == ENOENT && (flags & FEVAL_ENOENTOK) != 0) ? 0 : -1));
+    }
+
+  errfunc = ((flags & FEVAL_BUILTIN) ? builtin_error : internal_error);
+
+  if (S_ISDIR (finfo.st_mode))
+    {
+      (*errfunc) (_("%s: is a directory"), filename);
+      close (fd);
+      return ((flags & FEVAL_BUILTIN) ? EXECUTION_FAILURE : -1);
+    }
+  else if ((flags & FEVAL_REGFILE) && S_ISREG (finfo.st_mode) == 0)
+    {
+      (*errfunc) (_("%s: not a regular file"), filename);
+      close (fd);
+      return ((flags & FEVAL_BUILTIN) ? EXECUTION_FAILURE : -1);
+    }
+
+  file_size = (size_t)finfo.st_size;
+  /* Check for overflow with large files. */
+  if (file_size != finfo.st_size || file_size + 1 < file_size)
+    {
+      (*errfunc) (_("%s: file is too large"), filename);
+      close (fd);
+      return ((flags & FEVAL_BUILTIN) ? EXECUTION_FAILURE : -1);
+    }      
+
+  if (S_ISREG (finfo.st_mode) && file_size <= SSIZE_MAX)
+    {
+      string = (char *)xmalloc (1 + file_size);
+      nr = read (fd, string, file_size);
+      if (nr >= 0)
+	string[nr] = '\0';
+    }
+  else
+    nr = zmapfd (fd, &string, 0);
+
+  return_val = errno;
+  close (fd);
+  errno = return_val;
+
+  if (nr < 0)		/* XXX was != file_size, not < 0 */
+    {
+      free (string);
+      goto file_error_and_exit;
+    }
+
+  if (nr == 0)
+    {
+      free (string);
+      return ((flags & FEVAL_BUILTIN) ? EXECUTION_SUCCESS : 1);
+    }
+      
+  if ((flags & FEVAL_CHECKBINARY) && 
+      check_binary_file (string, (nr > 80) ? 80 : nr))
+    {
+      free (string);
+      (*errfunc) (_("%s: cannot execute binary file"), filename);
+      return ((flags & FEVAL_BUILTIN) ? EX_BINARY_FILE : -1);
+    }
+
+  i = strlen (string);
+  if (i < nr)
+    {
+      for (nnull = i = 0; i < nr; i++)
+	if (string[i] == '\0')
+          {
+	    memmove (string+i, string+i+1, nr - i);
+	    nr--;
+	    /* Even if the `check binary' flag is not set, we want to avoid
+	       sourcing files with more than 256 null characters -- that
+	       probably indicates a binary file. */
+	    if ((flags & FEVAL_BUILTIN) && ++nnull > 256)
+	      {
+		free (string);
+		(*errfunc) (_("%s: cannot execute binary file"), filename);
+		return ((flags & FEVAL_BUILTIN) ? EX_BINARY_FILE : -1);
+	      }
+          }
+    }
+
+  if (flags & FEVAL_UNWINDPROT)
+    {
+      begin_unwind_frame ("_evalfile");
+
+      unwind_protect_int (return_catch_flag);
+      unwind_protect_jmp_buf (return_catch);
+      if (flags & FEVAL_NONINT)
+	unwind_protect_int (interactive);
+      unwind_protect_int (sourcelevel);
+    }
+  else
+    {
+      COPY_PROCENV (return_catch, old_return_catch);
+      if (flags & FEVAL_NONINT)
+	old_interactive = interactive;
+    }
+
+  if (flags & FEVAL_NONINT)
+    interactive = 0;
+
+  return_catch_flag++;
+  sourcelevel++;
+
+#if defined (ARRAY_VARS)
+  array_push (bash_source_a, (char *)filename);
+  t = itos (executing_line_number ());
+  array_push (bash_lineno_a, t);
+  free (t);
+  array_push (funcname_a, "source");	/* not exactly right */
+
+  fa = (struct func_array_state *)xmalloc (sizeof (struct func_array_state));
+  fa->source_a = bash_source_a;
+  fa->source_v = bash_source_v;
+  fa->lineno_a = bash_lineno_a;
+  fa->lineno_v = bash_lineno_v;
+  fa->funcname_a = funcname_a;
+  fa->funcname_v = funcname_v;
+  if (flags & FEVAL_UNWINDPROT)
+    add_unwind_protect (restore_funcarray_state, fa);
+
+#  if defined (DEBUGGER)
+  /* Have to figure out a better way to do this when `source' is supplied
+     arguments */
+  if ((flags & FEVAL_NOPUSHARGS) == 0)
+    {
+      if (shell_compatibility_level <= 44)
+	init_bash_argv ();
+      array_push (bash_argv_a, (char *)filename);	/* XXX - unconditionally? */
+      tt[0] = '1'; tt[1] = '\0';
+      array_push (bash_argc_a, tt);
+      if (flags & FEVAL_UNWINDPROT)
+	add_unwind_protect (pop_args, 0);
+    }
+#  endif
+#endif
+
+  /* set the flags to be passed to parse_and_execute */
+  pflags = SEVAL_RESETLINE;
+  pflags |= (flags & FEVAL_HISTORY) ? 0 : SEVAL_NOHIST;
+
+  if (flags & FEVAL_BUILTIN)
+    result = EXECUTION_SUCCESS;
+
+  return_val = setjmp_nosigs (return_catch);
+
+  /* If `return' was seen outside of a function, but in the script, then
+     force parse_and_execute () to clean up. */
+  if (return_val)
+    {
+      parse_and_execute_cleanup (-1);
+      result = return_catch_value;
+    }
+  else
+    result = parse_and_execute (string, filename, pflags);
+
+  if (flags & FEVAL_UNWINDPROT)
+    run_unwind_frame ("_evalfile");
+  else
+    {
+      if (flags & FEVAL_NONINT)
+	interactive = old_interactive;
+#if defined (ARRAY_VARS)
+      restore_funcarray_state (fa);
+#  if defined (DEBUGGER)
+      if ((flags & FEVAL_NOPUSHARGS) == 0)
+	{
+	  /* Don't need to call pop_args here until we do something better
+	     when source is passed arguments (see above). */
+	  array_pop (bash_argc_a);
+	  array_pop (bash_argv_a);
+	}
+#  endif
+#endif
+      return_catch_flag--;
+      sourcelevel--;
+      COPY_PROCENV (old_return_catch, return_catch);
+    }
+
+  /* If we end up with EOF after sourcing a file, which can happen when the file
+     doesn't end with a newline, pretend that it did. */
+  if (current_token == yacc_EOF)
+    push_token ('\n');		/* XXX */
+
+  return ((flags & FEVAL_BUILTIN) ? result : 1);
+}
+
+int
+maybe_execute_file (fname, force_noninteractive)
+     const char *fname;
+     int force_noninteractive;
+{
+  char *filename;
+  int result, flags;
+
+  filename = bash_tilde_expand (fname, 0);
+  flags = FEVAL_ENOENTOK;
+  if (force_noninteractive)
+    flags |= FEVAL_NONINT;
+  result = _evalfile (filename, flags);
+  free (filename);
+  return result;
+}
+
+int
+force_execute_file (fname, force_noninteractive)
+     const char *fname;
+     int force_noninteractive;
+{
+  char *filename;
+  int result, flags;
+
+  filename = bash_tilde_expand (fname, 0);
+  flags = 0;
+  if (force_noninteractive)
+    flags |= FEVAL_NONINT;
+  result = _evalfile (filename, flags);
+  free (filename);
+  return result;
+}
+
+#if defined (HISTORY)
+int
+fc_execute_file (filename)
+     const char *filename;
+{
+  int flags;
+
+  /* We want these commands to show up in the history list if
+     remember_on_history is set.  We use FEVAL_BUILTIN to return
+     the result of parse_and_execute. */
+  flags = FEVAL_ENOENTOK|FEVAL_HISTORY|FEVAL_REGFILE|FEVAL_BUILTIN;
+  return (_evalfile (filename, flags));
+}
+#endif /* HISTORY */
+
+int
+source_file (filename, sflags)
+     const char *filename;
+     int sflags;
+{
+  int flags, rval;
+
+  flags = FEVAL_BUILTIN|FEVAL_UNWINDPROT|FEVAL_NONINT;
+  if (sflags)
+    flags |= FEVAL_NOPUSHARGS;
+  /* POSIX shells exit if non-interactive and file error. */
+  if (posixly_correct && interactive_shell == 0 && executing_command_builtin == 0)
+    flags |= FEVAL_LONGJMP;
+  rval = _evalfile (filename, flags);
+
+  run_return_trap ();
+  return rval;
+}
diff --git a/builtins/evalstring.c b/builtins/evalstring.c
new file mode 100644
index 0000000..18928a1
--- /dev/null
+++ b/builtins/evalstring.c
@@ -0,0 +1,758 @@
+/* evalstring.c - evaluate a string as one or more shell commands. */
+
+/* Copyright (C) 1996-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include <signal.h>
+
+#include <errno.h>
+
+#include "filecntl.h"
+#include "../bashansi.h"
+
+#include "../shell.h"
+#include "../jobs.h"
+#include "../builtins.h"
+#include "../flags.h"
+#include "../parser.h"
+#include "../input.h"
+#include "../execute_cmd.h"
+#include "../redir.h"
+#include "../trap.h"
+#include "../bashintl.h"
+
+#include <y.tab.h>
+
+#if defined (HISTORY)
+#  include "../bashhist.h"
+#endif
+
+#include "common.h"
+#include "builtext.h"
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+#define IS_BUILTIN(s)	(builtin_address_internal(s, 0) != (struct builtin *)NULL)
+
+int parse_and_execute_level = 0;
+
+static int cat_file PARAMS((REDIRECT *));
+
+#define PE_TAG "parse_and_execute top"
+#define PS_TAG "parse_string top"
+
+#if defined (HISTORY)
+static void
+set_history_remembering ()
+{
+  remember_on_history = enable_history_list;
+}
+#endif
+
+static void
+restore_lastcom (x)
+     char *x;
+{
+  FREE (the_printed_command_except_trap);
+  the_printed_command_except_trap = x;
+}
+
+int
+should_suppress_fork (command)
+     COMMAND *command;
+{
+#if 0 /* TAG: bash-5.2 */
+  int subshell;
+
+  subshell = subshell_environment & SUBSHELL_PROCSUB;	/* salt to taste */
+#endif
+  return (startup_state == 2 && parse_and_execute_level == 1 &&
+	  running_trap == 0 &&
+	  *bash_input.location.string == '\0' &&
+	  parser_expanding_alias () == 0 &&
+	  command->type == cm_simple &&
+	  signal_is_trapped (EXIT_TRAP) == 0 &&
+	  signal_is_trapped (ERROR_TRAP) == 0 &&
+	  any_signals_trapped () < 0 &&
+#if 0 /* TAG: bash-5.2 */
+	  (subshell || (command->redirects == 0 && command->value.Simple->redirects == 0)) &&
+#else
+	  command->redirects == 0 && command->value.Simple->redirects == 0 &&
+#endif
+	  ((command->flags & CMD_TIME_PIPELINE) == 0) &&
+	  ((command->flags & CMD_INVERT_RETURN) == 0));
+}
+
+int
+can_optimize_connection (command)
+     COMMAND *command;
+{
+  return (*bash_input.location.string == '\0' &&
+	  parser_expanding_alias () == 0 &&
+	  (command->value.Connection->connector == AND_AND || command->value.Connection->connector == OR_OR || command->value.Connection->connector == ';') &&
+	  command->value.Connection->second->type == cm_simple);
+}
+
+void
+optimize_fork (command)
+     COMMAND *command;
+{
+  if (command->type == cm_connection &&
+      (command->value.Connection->connector == AND_AND || command->value.Connection->connector == OR_OR || command->value.Connection->connector == ';') &&
+      (command->value.Connection->second->flags & CMD_TRY_OPTIMIZING) &&
+      should_suppress_fork (command->value.Connection->second))
+    {
+      command->value.Connection->second->flags |= CMD_NO_FORK;
+      command->value.Connection->second->value.Simple->flags |= CMD_NO_FORK;
+    }
+}
+
+void
+optimize_subshell_command (command)
+     COMMAND *command;
+{
+  if (running_trap == 0 &&
+      command->type == cm_simple &&
+      signal_is_trapped (EXIT_TRAP) == 0 &&
+      signal_is_trapped (ERROR_TRAP) == 0 &&
+      any_signals_trapped () < 0 &&
+      command->redirects == 0 && command->value.Simple->redirects == 0 &&
+      ((command->flags & CMD_TIME_PIPELINE) == 0) &&
+      ((command->flags & CMD_INVERT_RETURN) == 0))
+    {
+      command->flags |= CMD_NO_FORK;
+      command->value.Simple->flags |= CMD_NO_FORK;
+    }
+  else if (command->type == cm_connection &&
+	   (command->value.Connection->connector == AND_AND || command->value.Connection->connector == OR_OR))
+    optimize_subshell_command (command->value.Connection->second);
+}
+
+void
+optimize_shell_function (command)
+     COMMAND *command;
+{
+  COMMAND *fc;
+
+  fc = (command->type == cm_group) ? command->value.Group->command : command;
+
+  if (fc->type == cm_simple && should_suppress_fork (fc))
+    {
+      fc->flags |= CMD_NO_FORK;
+      fc->value.Simple->flags |= CMD_NO_FORK;
+    }
+  else if (fc->type == cm_connection && can_optimize_connection (fc) && should_suppress_fork (fc->value.Connection->second))
+    {
+      fc->value.Connection->second->flags |= CMD_NO_FORK;
+      fc->value.Connection->second->value.Simple->flags |= CMD_NO_FORK;
+    }  
+}
+
+/* How to force parse_and_execute () to clean up after itself. */
+void
+parse_and_execute_cleanup (old_running_trap)
+     int old_running_trap;
+{
+  if (running_trap > 0)
+    {
+      /* We assume if we have a different value for running_trap than when
+	 we started (the only caller that cares is evalstring()), the
+	 original caller will perform the cleanup, and we should not step
+	 on them. */
+      if (running_trap != old_running_trap)
+	run_trap_cleanup (running_trap - 1);
+      unfreeze_jobs_list ();
+    }
+
+  if (have_unwind_protects ())
+     run_unwind_frame (PE_TAG);
+  else
+    parse_and_execute_level = 0;			/* XXX */
+}
+
+static void
+parse_prologue (string, flags, tag)
+     char *string;
+     int flags;
+     char *tag;
+{
+  char *orig_string, *lastcom;
+  int x;
+
+  orig_string = string;
+  /* Unwind protect this invocation of parse_and_execute (). */
+  begin_unwind_frame (tag);
+  unwind_protect_int (parse_and_execute_level);
+  unwind_protect_jmp_buf (top_level);
+  unwind_protect_int (indirection_level);
+  unwind_protect_int (line_number);
+  unwind_protect_int (line_number_for_err_trap);
+  unwind_protect_int (loop_level);
+  unwind_protect_int (executing_list);
+  unwind_protect_int (comsub_ignore_return);
+  if (flags & (SEVAL_NONINT|SEVAL_INTERACT))
+    unwind_protect_int (interactive);
+
+#if defined (HISTORY)
+  if (parse_and_execute_level == 0)
+    add_unwind_protect (set_history_remembering, (char *)NULL);
+  else
+    unwind_protect_int (remember_on_history);	/* can be used in scripts */
+#  if defined (BANG_HISTORY)
+  unwind_protect_int (history_expansion_inhibited);
+#  endif /* BANG_HISTORY */
+#endif /* HISTORY */
+
+  if (interactive_shell)
+    {
+      x = get_current_prompt_level ();
+      add_unwind_protect (set_current_prompt_level, x);
+    }
+
+  if (the_printed_command_except_trap)
+    {
+      lastcom = savestring (the_printed_command_except_trap);
+      add_unwind_protect (restore_lastcom, lastcom);
+    }
+
+  add_unwind_protect (pop_stream, (char *)NULL);
+  if (parser_expanding_alias ())
+    add_unwind_protect (parser_restore_alias, (char *)NULL);
+
+  if (orig_string && ((flags & SEVAL_NOFREE) == 0))
+    add_unwind_protect (xfree, orig_string);
+  end_unwind_frame ();
+
+  if (flags & (SEVAL_NONINT|SEVAL_INTERACT))
+    interactive = (flags & SEVAL_NONINT) ? 0 : 1;
+
+#if defined (HISTORY)
+  if (flags & SEVAL_NOHIST)
+    bash_history_disable ();
+#  if defined (BANG_HISTORY)
+  if (flags & SEVAL_NOHISTEXP)
+    history_expansion_inhibited = 1;
+#  endif /* BANG_HISTORY */
+#endif /* HISTORY */
+}
+
+/* Parse and execute the commands in STRING.  Returns whatever
+   execute_command () returns.  This frees STRING.  FLAGS is a
+   flags word; look in common.h for the possible values.  Actions
+   are:
+   	(flags & SEVAL_NONINT) -> interactive = 0;
+   	(flags & SEVAL_INTERACT) -> interactive = 1;
+   	(flags & SEVAL_NOHIST) -> call bash_history_disable ()
+   	(flags & SEVAL_NOFREE) -> don't free STRING when finished
+   	(flags & SEVAL_RESETLINE) -> reset line_number to 1
+   	(flags & SEVAL_NOHISTEXP) -> history_expansion_inhibited -> 1
+*/
+
+int
+parse_and_execute (string, from_file, flags)
+     char *string;
+     const char *from_file;
+     int flags;
+{
+  int code, lreset;
+  volatile int should_jump_to_top_level, last_result;
+  COMMAND *volatile command;
+  volatile sigset_t pe_sigmask;
+
+  parse_prologue (string, flags, PE_TAG);
+
+  parse_and_execute_level++;
+
+  lreset = flags & SEVAL_RESETLINE;
+
+#if defined (HAVE_POSIX_SIGNALS)
+  /* If we longjmp and are going to go on, use this to restore signal mask */
+  sigemptyset ((sigset_t *)&pe_sigmask);
+  sigprocmask (SIG_BLOCK, (sigset_t *)NULL, (sigset_t *)&pe_sigmask);
+#endif
+
+  /* Reset the line number if the caller wants us to.  If we don't reset the
+     line number, we have to subtract one, because we will add one just
+     before executing the next command (resetting the line number sets it to
+     0; the first line number is 1). */
+  push_stream (lreset);
+  if (parser_expanding_alias ())
+    /* push current shell_input_line */
+    parser_save_alias ();
+  
+  if (lreset == 0)
+    line_number--;
+    
+  indirection_level++;
+
+  code = should_jump_to_top_level = 0;
+  last_result = EXECUTION_SUCCESS;
+
+  /* We need to reset enough of the token state so we can start fresh. */
+  if (current_token == yacc_EOF)
+    current_token = '\n';		/* reset_parser() ? */
+
+  with_input_from_string (string, from_file);
+  clear_shell_input_line ();
+  while (*(bash_input.location.string) || parser_expanding_alias ())
+    {
+      command = (COMMAND *)NULL;
+
+      if (interrupt_state)
+	{
+	  last_result = EXECUTION_FAILURE;
+	  break;
+	}
+
+      /* Provide a location for functions which `longjmp (top_level)' to
+	 jump to.  This prevents errors in substitution from restarting
+	 the reader loop directly, for example. */
+      code = setjmp_nosigs (top_level);
+
+      if (code)
+	{
+	  should_jump_to_top_level = 0;
+	  switch (code)
+	    {
+	    case ERREXIT:
+	      /* variable_context -> 0 is what eval.c:reader_loop() does in
+		 these circumstances.  Don't bother with cleanup here because
+		 we don't want to run the function execution cleanup stuff
+		 that will cause pop_context and other functions to run.
+		 XXX - change that if we want the function context to be
+		 unwound. */
+	      if (exit_immediately_on_error && variable_context)
+	        {
+	          discard_unwind_frame ("pe_dispose");
+		  variable_context = 0;	/* not in a function */
+	        }
+	      should_jump_to_top_level = 1;
+	      goto out;
+	    case FORCE_EOF:	      
+	    case EXITPROG:
+	      if (command)
+		run_unwind_frame ("pe_dispose");
+	      /* Remember to call longjmp (top_level) after the old
+		 value for it is restored. */
+	      should_jump_to_top_level = 1;
+	      goto out;
+
+	    case DISCARD:
+	      if (command)
+		run_unwind_frame ("pe_dispose");
+	      last_result = last_command_exit_value = EXECUTION_FAILURE; /* XXX */
+	      set_pipestatus_from_exit (last_command_exit_value);
+	      if (subshell_environment)
+		{
+		  should_jump_to_top_level = 1;
+		  goto out;
+		}
+	      else
+		{
+#if 0
+		  dispose_command (command);	/* pe_dispose does this */
+#endif
+#if defined (HAVE_POSIX_SIGNALS)
+		  sigprocmask (SIG_SETMASK, (sigset_t *)&pe_sigmask, (sigset_t *)NULL);
+#endif
+		  continue;
+		}
+
+	    default:
+	      command_error ("parse_and_execute", CMDERR_BADJUMP, code, 0);
+	      break;
+	    }
+	}
+	  
+      if (parse_command () == 0)
+	{
+	  if ((flags & SEVAL_PARSEONLY) || (interactive_shell == 0 && read_but_dont_execute))
+	    {
+	      last_result = EXECUTION_SUCCESS;
+	      dispose_command (global_command);
+	      global_command = (COMMAND *)NULL;
+	    }
+	  else if (command = global_command)
+	    {
+	      struct fd_bitmap *bitmap;
+
+	      if (flags & SEVAL_FUNCDEF)
+		{
+		  char *x;
+
+		  /* If the command parses to something other than a straight
+		     function definition, or if we have not consumed the entire
+		     string, or if the parser has transformed the function
+		     name (as parsing will if it begins or ends with shell
+		     whitespace, for example), reject the attempt */
+		  if (command->type != cm_function_def ||
+		      ((x = parser_remaining_input ()) && *x) ||
+		      (STREQ (from_file, command->value.Function_def->name->word) == 0))
+		    {
+		      internal_warning (_("%s: ignoring function definition attempt"), from_file);
+		      should_jump_to_top_level = 0;
+		      last_result = last_command_exit_value = EX_BADUSAGE;
+		      set_pipestatus_from_exit (last_command_exit_value);
+		      reset_parser ();
+		      break;
+		    }
+		}
+
+	      bitmap = new_fd_bitmap (FD_BITMAP_SIZE);
+	      begin_unwind_frame ("pe_dispose");
+	      add_unwind_protect (dispose_fd_bitmap, bitmap);
+	      add_unwind_protect (dispose_command, command);	/* XXX */
+
+	      global_command = (COMMAND *)NULL;
+
+	      if ((subshell_environment & SUBSHELL_COMSUB) && comsub_ignore_return)
+		command->flags |= CMD_IGNORE_RETURN;
+
+#if defined (ONESHOT)
+	      /*
+	       * IF
+	       *   we were invoked as `bash -c' (startup_state == 2) AND
+	       *   parse_and_execute has not been called recursively AND
+	       *   we're not running a trap AND
+	       *   we have parsed the full command (string == '\0') AND
+	       *   we're not going to run the exit trap AND
+	       *   we have a simple command without redirections AND
+	       *   the command is not being timed AND
+	       *   the command's return status is not being inverted AND
+	       *   there aren't any traps in effect
+	       * THEN
+	       *   tell the execution code that we don't need to fork
+	       */
+	      if (should_suppress_fork (command))
+		{
+		  command->flags |= CMD_NO_FORK;
+		  command->value.Simple->flags |= CMD_NO_FORK;
+		}
+
+	      /* Can't optimize forks out here execept for simple commands.
+		 This knows that the parser sets up commands as left-side heavy
+		 (&& and || are left-associative) and after the single parse,
+		 if we are at the end of the command string, the last in a
+		 series of connection commands is
+		 command->value.Connection->second. */
+	      else if (command->type == cm_connection && can_optimize_connection (command))
+		{
+		  command->value.Connection->second->flags |= CMD_TRY_OPTIMIZING;
+		  command->value.Connection->second->value.Simple->flags |= CMD_TRY_OPTIMIZING;
+		}
+#endif /* ONESHOT */
+
+	      /* See if this is a candidate for $( <file ). */
+	      if (startup_state == 2 &&
+		  (subshell_environment & SUBSHELL_COMSUB) &&
+		  *bash_input.location.string == '\0' &&
+		  command->type == cm_simple && !command->redirects &&
+		  (command->flags & CMD_TIME_PIPELINE) == 0 &&
+		  command->value.Simple->words == 0 &&
+		  command->value.Simple->redirects &&
+		  command->value.Simple->redirects->next == 0 &&
+		  command->value.Simple->redirects->instruction == r_input_direction &&
+		  command->value.Simple->redirects->redirector.dest == 0)
+		{
+		  int r;
+		  r = cat_file (command->value.Simple->redirects);
+		  last_result = (r < 0) ? EXECUTION_FAILURE : EXECUTION_SUCCESS;
+		}
+	      else
+		last_result = execute_command_internal
+				(command, 0, NO_PIPE, NO_PIPE, bitmap);
+	      dispose_command (command);
+	      dispose_fd_bitmap (bitmap);
+	      discard_unwind_frame ("pe_dispose");
+
+	      if (flags & SEVAL_ONECMD)
+		{
+		  reset_parser ();
+		  break;
+		}
+	    }
+	}
+      else
+	{
+	  last_result = EX_BADUSAGE;	/* was EXECUTION_FAILURE */
+
+	  if (interactive_shell == 0 && this_shell_builtin &&
+	      (this_shell_builtin == source_builtin || this_shell_builtin == eval_builtin) &&
+	      last_command_exit_value == EX_BADSYNTAX && posixly_correct && executing_command_builtin == 0)
+	    {
+	      should_jump_to_top_level = 1;
+	      code = ERREXIT;
+	      last_command_exit_value = EX_BADUSAGE;
+	    }
+
+	  /* Since we are shell compatible, syntax errors in a script
+	     abort the execution of the script.  Right? */
+	  break;
+	}
+    }
+
+ out:
+
+  run_unwind_frame (PE_TAG);
+
+  if (interrupt_state && parse_and_execute_level == 0)
+    {
+      /* An interrupt during non-interactive execution in an
+	 interactive shell (e.g. via $PROMPT_COMMAND) should
+	 not cause the shell to exit. */
+      interactive = interactive_shell;
+      throw_to_top_level ();
+    }
+
+  if (should_jump_to_top_level)
+    jump_to_top_level (code);
+
+  return (last_result);
+}
+
+/* Parse a command contained in STRING according to FLAGS and return the
+   number of characters consumed from the string.  If non-NULL, set *ENDP
+   to the position in the string where the parse ended.  Used to validate
+   command substitutions during parsing to obey Posix rules about finding
+   the end of the command and balancing parens. */
+int
+parse_string (string, from_file, flags, endp)
+     char *string;
+     const char *from_file;
+     int flags;
+     char **endp;
+{
+  int code, nc;
+  volatile int should_jump_to_top_level;
+  COMMAND *volatile command, *oglobal;
+  char *ostring;
+  volatile sigset_t ps_sigmask;
+
+  parse_prologue (string, flags, PS_TAG);
+
+#if defined (HAVE_POSIX_SIGNALS)
+  /* If we longjmp and are going to go on, use this to restore signal mask */
+  sigemptyset ((sigset_t *)&ps_sigmask);
+  sigprocmask (SIG_BLOCK, (sigset_t *)NULL, (sigset_t *)&ps_sigmask);
+#endif
+
+/*itrace("parse_string: `%s'", string);*/
+  /* Reset the line number if the caller wants us to.  If we don't reset the
+     line number, we have to subtract one, because we will add one just
+     before executing the next command (resetting the line number sets it to
+     0; the first line number is 1). */
+  push_stream (0);
+  if (parser_expanding_alias ())
+    /* push current shell_input_line */
+    parser_save_alias ();
+
+  code = should_jump_to_top_level = 0;
+  oglobal = global_command;
+  ostring = string;
+
+  with_input_from_string (string, from_file);
+  while (*(bash_input.location.string))		/* XXX - parser_expanding_alias () ? */
+    {
+      command = (COMMAND *)NULL;
+
+#if 0
+      if (interrupt_state)
+	break;
+#endif
+
+      /* Provide a location for functions which `longjmp (top_level)' to
+	 jump to. */
+      code = setjmp_nosigs (top_level);
+
+      if (code)
+	{
+#if defined (DEBUG)
+itrace("parse_string: longjmp executed: code = %d", code);
+#endif
+	  should_jump_to_top_level = 0;
+	  switch (code)
+	    {
+	    case FORCE_EOF:
+	    case ERREXIT:
+	    case EXITPROG:
+	    case DISCARD:		/* XXX */
+	      if (command)
+		dispose_command (command);
+	      /* Remember to call longjmp (top_level) after the old
+		 value for it is restored. */
+	      should_jump_to_top_level = 1;
+	      goto out;
+
+	    default:
+#if defined (HAVE_POSIX_SIGNALS)
+	      sigprocmask (SIG_SETMASK, (sigset_t *)&ps_sigmask, (sigset_t *)NULL);
+#endif
+	      command_error ("parse_string", CMDERR_BADJUMP, code, 0);
+	      break;
+	    }
+	}
+	  
+      if (parse_command () == 0)
+	{
+	  dispose_command (global_command);
+	  global_command = (COMMAND *)NULL;
+	}
+      else
+	{
+	  if ((flags & SEVAL_NOLONGJMP) == 0)
+	    {
+	      should_jump_to_top_level = 1;
+	      code = DISCARD;
+	    }
+	  else
+	    reset_parser ();	/* XXX - sets token_to_read */
+	  break;
+	}
+
+      if (current_token == yacc_EOF || current_token == shell_eof_token)
+	  break;
+    }
+
+out:
+
+  global_command = oglobal;
+  nc = bash_input.location.string - ostring;
+  if (endp)
+    *endp = bash_input.location.string;
+
+  run_unwind_frame (PS_TAG);
+
+  /* If we return < 0, the caller (xparse_dolparen) will jump_to_top_level for
+     us, after doing cleanup */
+  if (should_jump_to_top_level)
+    {
+      if (parse_and_execute_level == 0)
+	top_level_cleanup ();
+      if (code == DISCARD)
+	return -DISCARD;
+      jump_to_top_level (code);
+    }
+
+  return (nc);
+}
+
+/* Handle a $( < file ) command substitution.  This expands the filename,
+   returning errors as appropriate, then just cats the file to the standard
+   output. */
+static int
+cat_file (r)
+     REDIRECT *r;
+{
+  char *fn;
+  int fd, rval;
+
+  if (r->instruction != r_input_direction)
+    return -1;
+
+  /* Get the filename. */
+  if (posixly_correct && !interactive_shell)
+    disallow_filename_globbing++;
+  fn = redirection_expand (r->redirectee.filename);
+  if (posixly_correct && !interactive_shell)
+    disallow_filename_globbing--;
+
+  if (fn == 0)
+    {
+      redirection_error (r, AMBIGUOUS_REDIRECT, fn);
+      return -1;
+    }
+
+  fd = open(fn, O_RDONLY);
+  if (fd < 0)
+    {
+      file_error (fn);
+      free (fn);
+      return -1;
+    }
+
+  rval = zcatfd (fd, 1, fn);
+
+  free (fn);
+  close (fd);
+
+  return (rval);
+}
+
+int
+evalstring (string, from_file, flags)
+     char *string;
+     const char *from_file;
+     int flags;
+{
+  volatile int r, rflag, rcatch;
+  volatile int was_trap;
+
+  /* Are we running a trap when we execute this function? */
+  was_trap = running_trap;
+
+  rcatch = 0;
+  rflag = return_catch_flag;
+  /* If we are in a place where `return' is valid, we have to catch
+     `eval "... return"' and make sure parse_and_execute cleans up. Then
+     we can trampoline to the previous saved return_catch location. */
+  if (rflag)
+    {
+      begin_unwind_frame ("evalstring");
+
+      unwind_protect_int (return_catch_flag);
+      unwind_protect_jmp_buf (return_catch);
+
+      return_catch_flag++;	/* increment so we have a counter */
+      rcatch = setjmp_nosigs (return_catch);
+    }
+
+  if (rcatch)
+    {
+      /* We care about whether or not we are running the same trap we were
+	 when we entered this function. */
+      parse_and_execute_cleanup (was_trap);
+      r = return_catch_value;
+    }
+  else
+    /* Note that parse_and_execute () frees the string it is passed. */
+    r = parse_and_execute (string, from_file, flags);
+
+  if (rflag)
+    {
+      run_unwind_frame ("evalstring");
+      if (rcatch && return_catch_flag)
+	{
+	  return_catch_value = r;
+	  sh_longjmp (return_catch, 1);
+	}
+    }
+    
+  return (r);
+}
diff --git a/builtins/exec.def b/builtins/exec.def
new file mode 100644
index 0000000..cbcb641
--- /dev/null
+++ b/builtins/exec.def
@@ -0,0 +1,273 @@
+This file is exec.def, from which is created exec.c.
+It implements the builtin "exec" in Bash.
+
+Copyright (C) 1987-2019 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES exec.c
+
+$BUILTIN exec
+$FUNCTION exec_builtin
+$SHORT_DOC exec [-cl] [-a name] [command [argument ...]] [redirection ...]
+Replace the shell with the given command.
+
+Execute COMMAND, replacing this shell with the specified program.
+ARGUMENTS become the arguments to COMMAND.  If COMMAND is not specified,
+any redirections take effect in the current shell.
+
+Options:
+  -a name	pass NAME as the zeroth argument to COMMAND
+  -c	execute COMMAND with an empty environment
+  -l	place a dash in the zeroth argument to COMMAND
+
+If the command cannot be executed, a non-interactive shell exits, unless
+the shell option `execfail' is set.
+
+Exit Status:
+Returns success unless COMMAND is not found or a redirection error occurs.
+$END
+
+#include <config.h>
+
+#include "../bashtypes.h"
+#include "posixstat.h"
+#include <signal.h>
+#include <errno.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+
+#include "../bashansi.h"
+#include "../bashintl.h"
+
+#include "../shell.h"
+#include "../execute_cmd.h"
+#include "../findcmd.h"
+#if defined (JOB_CONTROL)
+#  include "../jobs.h"
+#endif
+#include "../flags.h"
+#include "../trap.h"
+#if defined (HISTORY)
+#  include "../bashhist.h"
+#endif
+#include "common.h"
+#include "bashgetopt.h"
+#include "input.h"
+
+/* Not all systems declare ERRNO in errno.h... and some systems #define it! */
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+extern REDIRECT *redirection_undo_list;
+extern char *exec_argv0;
+
+int no_exit_on_failed_exec;
+
+/* If the user wants this to look like a login shell, then
+   prepend a `-' onto NAME and return the new name. */
+static char *
+mkdashname (name)
+     char *name;
+{
+  char *ret;
+
+  ret = (char *)xmalloc (2 + strlen (name));
+  ret[0] = '-';
+  strcpy (ret + 1, name);
+  return ret;
+}
+
+int
+exec_builtin (list)
+     WORD_LIST *list;
+{
+  int exit_value = EXECUTION_FAILURE;
+  int cleanenv, login, opt, orig_job_control;
+  char *argv0, *command, **args, **env, *newname, *com2;
+
+  cleanenv = login = 0;
+  exec_argv0 = argv0 = (char *)NULL;
+
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "cla:")) != -1)
+    {
+      switch (opt)
+	{
+	case 'c':
+	  cleanenv = 1;
+	  break;
+	case 'l':
+	  login = 1;
+	  break;
+	case 'a':
+	  argv0 = list_optarg;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+  /* First, let the redirections remain. */
+  dispose_redirects (redirection_undo_list);
+  redirection_undo_list = (REDIRECT *)NULL;
+
+  if (list == 0)
+    return (EXECUTION_SUCCESS);
+
+#if defined (RESTRICTED_SHELL)
+  if (restricted)
+    {
+      sh_restricted ((char *)NULL);
+      return (EXECUTION_FAILURE);
+    }
+#endif /* RESTRICTED_SHELL */
+
+  args = strvec_from_word_list (list, 1, 0, (int *)NULL);
+  env = (char **)0;
+
+  /* A command with a slash anywhere in its name is not looked up in $PATH. */
+  command = absolute_program (args[0]) ? args[0] : search_for_command (args[0], 1);
+
+  if (command == 0)
+    {
+      if (file_isdir (args[0]))
+	{
+#if defined (EISDIR)
+	  builtin_error (_("%s: cannot execute: %s"), args[0], strerror (EISDIR));
+#else
+	  builtin_error (_("%s: cannot execute: %s"), args[0], strerror (errno));
+#endif
+	  exit_value = EX_NOEXEC;
+	}
+      else
+	{
+	  sh_notfound (args[0]);
+	  exit_value = EX_NOTFOUND;	/* As per Posix.2, 3.14.6 */
+	}
+      goto failed_exec;
+    }
+
+  com2 = full_pathname (command);
+  if (com2)
+    {
+      if (command != args[0])
+	free (command);
+      command = com2;
+    }
+
+  if (argv0)
+    {
+      free (args[0]);
+      args[0] = login ? mkdashname (argv0) : savestring (argv0);
+      exec_argv0 = savestring (args[0]);
+    }
+  else if (login)
+    {
+      newname = mkdashname (args[0]);
+      free (args[0]);
+      args[0] = newname;
+    }
+
+  /* Decrement SHLVL by 1 so a new shell started here has the same value,
+     preserving the appearance.  After we do that, we need to change the
+     exported environment to include the new value.  If we've already forked
+     and are in a subshell, we don't want to decrement the shell level,
+     since we are `increasing' the level */
+
+  if (cleanenv == 0 && (subshell_environment & SUBSHELL_PAREN) == 0)
+    adjust_shell_level (-1);
+
+  if (cleanenv)
+    {
+      env = strvec_create (1);
+      env[0] = (char *)0;
+    }
+  else
+    {	
+      maybe_make_export_env ();
+      env = export_env;
+    }
+
+#if defined (HISTORY)
+  if (interactive_shell && subshell_environment == 0)
+    maybe_save_shell_history ();
+#endif /* HISTORY */
+
+  restore_original_signals ();
+
+#if defined (JOB_CONTROL)
+  orig_job_control = job_control;	/* XXX - was also interactive_shell */
+  if (subshell_environment == 0)
+    end_job_control ();
+  if (interactive || job_control)
+    default_tty_job_signals ();		/* undo initialize_job_signals */
+#endif /* JOB_CONTROL */
+
+#if defined (BUFFERED_INPUT)
+  if (default_buffered_input >= 0)
+    sync_buffered_stream (default_buffered_input);
+#endif
+
+  exit_value = shell_execve (command, args, env);
+
+  /* We have to set this to NULL because shell_execve has called realloc()
+     to stuff more items at the front of the array, which may have caused
+     the memory to be freed by realloc().  We don't want to free it twice. */
+  args = (char **)NULL;
+  if (cleanenv == 0)
+    adjust_shell_level (1);
+
+  if (exit_value == EX_NOTFOUND)	/* no duplicate error message */
+    goto failed_exec;
+  else if (executable_file (command) == 0)
+    {
+      builtin_error (_("%s: cannot execute: %s"), command, strerror (errno));
+      exit_value = EX_NOEXEC;	/* As per Posix.2, 3.14.6 */
+    }
+  else
+    file_error (command);
+
+failed_exec:
+  FREE (command);
+
+  if (subshell_environment || (interactive == 0 && no_exit_on_failed_exec == 0))
+    exit_shell (exit_value);
+
+  if (args)
+    strvec_dispose (args);
+
+  if (env && env != export_env)
+    strvec_dispose (env);
+
+  initialize_traps ();
+  initialize_signals (1);
+
+#if defined (JOB_CONTROL)
+  if (orig_job_control)
+    restart_job_control ();
+#endif /* JOB_CONTROL */
+
+  return (exit_value);
+}
diff --git a/builtins/exit.def b/builtins/exit.def
new file mode 100644
index 0000000..dc6f3d5
--- /dev/null
+++ b/builtins/exit.def
@@ -0,0 +1,169 @@
+This file is exit.def, from which is created exit.c.
+It implements the builtins "exit", and "logout" in Bash.
+
+Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES exit.c
+
+$BUILTIN exit
+$FUNCTION exit_builtin
+$SHORT_DOC exit [n]
+Exit the shell.
+
+Exits the shell with a status of N.  If N is omitted, the exit status
+is that of the last command executed.
+$END
+
+#include <config.h>
+
+#include "../bashtypes.h"
+#include <stdio.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "../bashintl.h"
+
+#include "../shell.h"
+#include "../execute_cmd.h"
+#include "../jobs.h"
+#include "../trap.h"
+
+#include "common.h"
+#include "builtext.h"	/* for jobs_builtin */
+
+extern int check_jobs_at_exit;
+
+static int exit_or_logout PARAMS((WORD_LIST *));
+static int sourced_logout;
+
+int
+exit_builtin (list)
+     WORD_LIST *list;
+{
+  CHECK_HELPOPT (list);
+
+  if (interactive)
+    {
+      fprintf (stderr, login_shell ? _("logout\n") : "exit\n");
+      fflush (stderr);
+    }
+
+  return (exit_or_logout (list));
+}
+
+$BUILTIN logout
+$FUNCTION logout_builtin
+$SHORT_DOC logout [n]
+Exit a login shell.
+
+Exits a login shell with exit status N.  Returns an error if not executed
+in a login shell.
+$END
+
+/* How to logout. */
+int
+logout_builtin (list)
+     WORD_LIST *list;
+{
+  CHECK_HELPOPT (list);
+
+  if (login_shell == 0 /* && interactive */)
+    {
+      builtin_error (_("not login shell: use `exit'"));
+      return (EXECUTION_FAILURE);
+    }
+  else
+    return (exit_or_logout (list));
+}
+
+static int
+exit_or_logout (list)
+     WORD_LIST *list;
+{
+  int exit_value;
+
+#if defined (JOB_CONTROL)
+  int exit_immediate_okay, stopmsg;
+
+  exit_immediate_okay = (interactive  == 0 ||
+			 last_shell_builtin == exit_builtin ||
+			 last_shell_builtin == logout_builtin ||
+			 last_shell_builtin == jobs_builtin);
+
+  /* Check for stopped jobs if the user wants to. */
+  if (exit_immediate_okay == 0)
+    {
+      register int i;
+      for (i = stopmsg = 0; i < js.j_jobslots; i++)
+	if (jobs[i] && STOPPED (i))
+	  stopmsg = JSTOPPED;
+	else if (check_jobs_at_exit && stopmsg == 0 && jobs[i] && RUNNING (i))
+	  stopmsg = JRUNNING;
+
+      if (stopmsg == JSTOPPED)
+	fprintf (stderr, _("There are stopped jobs.\n"));
+      else if (stopmsg == JRUNNING)
+	fprintf (stderr, _("There are running jobs.\n"));
+
+      if (stopmsg && check_jobs_at_exit)
+        list_all_jobs (JLIST_STANDARD);
+
+      if (stopmsg)
+	{
+	  /* This is NOT superfluous because EOF can get here without
+	     going through the command parser.  Set both last and this
+	     so that either `exit', `logout', or ^D will work to exit
+	     immediately if nothing intervenes. */
+	  this_shell_builtin = last_shell_builtin = exit_builtin;
+	  return (EXECUTION_FAILURE);
+	}
+    }
+#endif /* JOB_CONTROL */
+
+  /* Get return value if present.  This means that you can type
+     `logout 5' to a shell, and it returns 5. */
+
+  /* If we're running the exit trap (running_trap == 1, since running_trap
+     gets set to SIG+1), and we don't have a argument given to `exit'
+     (list == 0), use the exit status we saved before running the trap
+     commands (trap_saved_exit_value). */
+  exit_value = (running_trap == 1 && list == 0) ? trap_saved_exit_value : get_exitstat (list);
+
+  bash_logout ();
+
+  last_command_exit_value = exit_value;
+
+  /* Exit the program. */
+  jump_to_top_level (EXITPROG);
+  /*NOTREACHED*/
+}
+
+void
+bash_logout ()
+{
+  /* Run our `~/.bash_logout' file if it exists, and this is a login shell. */
+  if (login_shell && sourced_logout++ == 0 && subshell_environment == 0)
+    {
+      maybe_execute_file ("~/.bash_logout", 1);
+#ifdef SYS_BASH_LOGOUT
+      maybe_execute_file (SYS_BASH_LOGOUT, 1);
+#endif
+    }
+}
diff --git a/builtins/fc.def b/builtins/fc.def
new file mode 100644
index 0000000..467dbcb
--- /dev/null
+++ b/builtins/fc.def
@@ -0,0 +1,782 @@
+This file is fc.def, from which is created fc.c.
+It implements the builtin "fc" in Bash.
+
+Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES fc.c
+
+$BUILTIN fc
+$FUNCTION fc_builtin
+$DEPENDS_ON HISTORY
+$SHORT_DOC fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]
+Display or execute commands from the history list.
+
+fc is used to list or edit and re-execute commands from the history list.
+FIRST and LAST can be numbers specifying the range, or FIRST can be a
+string, which means the most recent command beginning with that
+string.
+
+Options:
+  -e ENAME	select which editor to use.  Default is FCEDIT, then EDITOR,
+		then vi
+  -l 	list lines instead of editing
+  -n	omit line numbers when listing
+  -r	reverse the order of the lines (newest listed first)
+
+With the `fc -s [pat=rep ...] [command]' format, COMMAND is
+re-executed after the substitution OLD=NEW is performed.
+
+A useful alias to use with this is r='fc -s', so that typing `r cc'
+runs the last command beginning with `cc' and typing `r' re-executes
+the last command.
+
+Exit Status:
+Returns success or status of executed command; non-zero if an error occurs.
+$END
+
+#include <config.h>
+
+#if defined (HISTORY)
+#if defined (HAVE_SYS_PARAM_H)
+#  include <sys/param.h>
+#endif
+#include "../bashtypes.h"
+#include "posixstat.h"
+#if ! defined(_MINIX) && defined (HAVE_SYS_FILE_H)
+#  include <sys/file.h>
+#endif
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include <chartypes.h>
+
+#include "../bashansi.h"
+#include "../bashintl.h"
+#include <errno.h>
+
+#include "../shell.h"
+#include "../builtins.h"
+#include "../flags.h"
+#include "../parser.h"
+#include "../bashhist.h"
+#include "maxpath.h"
+#include <readline/history.h>
+#include "bashgetopt.h"
+#include "common.h"
+
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+#define HIST_INVALID INT_MIN
+#define HIST_ERANGE  INT_MIN+1
+#define HIST_NOTFOUND INT_MIN+2
+
+/* Values for the flags argument to fc_gethnum */
+#define HN_LISTING	0x01
+#define HN_FIRST	0x02
+
+extern int unlink PARAMS((const char *));
+
+extern FILE *sh_mktmpfp PARAMS((char *, int, char **));
+
+extern int suppress_debug_trap_verbose;
+
+/* **************************************************************** */
+/*								    */
+/*	The K*rn shell style fc command (Fix Command)		    */
+/*								    */
+/* **************************************************************** */
+
+/* fc builtin command (fix command) for Bash for those who
+   like K*rn-style history better than csh-style.
+
+     fc [-e ename] [-nlr] [first] [last]
+
+   FIRST and LAST can be numbers specifying the range, or FIRST can be
+   a string, which means the most recent command beginning with that
+   string.
+
+   -e ENAME selects which editor to use.  Default is FCEDIT, then EDITOR,
+      then the editor which corresponds to the current readline editing
+      mode, then vi.
+
+   -l means list lines instead of editing.
+   -n means no line numbers listed.
+   -r means reverse the order of the lines (making it newest listed first).
+
+     fc -e - [pat=rep ...] [command]
+     fc -s [pat=rep ...] [command]
+
+   Equivalent to !command:sg/pat/rep execpt there can be multiple PAT=REP's.
+*/
+
+/* Data structure describing a list of global replacements to perform. */
+typedef struct repl {
+  struct repl *next;
+  char *pat;
+  char *rep;
+} REPL;
+
+/* Accessors for HIST_ENTRY lists that are called HLIST. */
+#define histline(i) (hlist[(i)]->line)
+#define histdata(i) (hlist[(i)]->data)
+
+#define FREE_RLIST() \
+	do { \
+		for (rl = rlist; rl; ) { \
+			REPL *r;	\
+			r = rl->next; \
+			if (rl->pat) \
+				free (rl->pat); \
+			if (rl->rep) \
+				free (rl->rep); \
+			free (rl); \
+			rl = r; \
+		} \
+	} while (0)
+
+static char *fc_dosubs PARAMS((char *, REPL *));
+static char *fc_gethist PARAMS((char *, HIST_ENTRY **, int));
+static int fc_gethnum PARAMS((char *, HIST_ENTRY **, int));
+static int fc_number PARAMS((WORD_LIST *));
+static void fc_replhist PARAMS((char *));
+#ifdef INCLUDE_UNUSED
+static char *fc_readline PARAMS((FILE *));
+static void fc_addhist PARAMS((char *));
+#endif
+
+static void
+set_verbose_flag ()
+{
+  echo_input_at_read = verbose_flag;
+}
+
+/* String to execute on a file that we want to edit. */
+#define FC_EDIT_COMMAND "${FCEDIT:-${EDITOR:-vi}}"
+#if defined (STRICT_POSIX)
+#  define POSIX_FC_EDIT_COMMAND "${FCEDIT:-ed}"
+#else
+#  define POSIX_FC_EDIT_COMMAND "${FCEDIT:-${EDITOR:-ed}}"
+#endif
+
+int
+fc_builtin (list)
+     WORD_LIST *list;
+{
+  register int i;
+  register char *sep;
+  int numbering, reverse, listing, execute;
+  int histbeg, histend, last_hist, retval, opt, rh, real_last;
+  FILE *stream;
+  REPL *rlist, *rl;
+  char *ename, *command, *newcom, *fcedit;
+  HIST_ENTRY **hlist;
+  char *fn;
+
+  numbering = 1;
+  reverse = listing = execute = 0;
+  ename = (char *)NULL;
+
+  /* Parse out the options and set which of the two forms we're in. */
+  reset_internal_getopt ();
+  lcurrent = list;		/* XXX */
+  while (fc_number (loptend = lcurrent) == 0 &&
+	 (opt = internal_getopt (list, ":e:lnrs")) != -1)
+    {
+      switch (opt)
+	{
+	case 'n':
+	  numbering = 0;
+	  break;
+
+	case 'l':
+	  listing = HN_LISTING;		/* for fc_gethnum */
+	  break;
+
+	case 'r':
+	  reverse = 1;
+	  break;
+
+	case 's':
+	  execute = 1;
+	  break;
+
+	case 'e':
+	  ename = list_optarg;
+	  break;
+
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+
+  list = loptend;
+
+  if (ename && (*ename == '-') && (ename[1] == '\0'))
+    execute = 1;
+
+  /* The "execute" form of the command (re-run, with possible string
+     substitutions). */
+  if (execute)
+    {
+      rlist = (REPL *)NULL;
+      while (list && ((sep = (char *)strchr (list->word->word, '=')) != NULL))
+	{
+	  *sep++ = '\0';
+	  rl = (REPL *)xmalloc (sizeof (REPL));
+	  rl->next = (REPL *)NULL;
+	  rl->pat = savestring (list->word->word);
+	  rl->rep = savestring (sep);
+
+	  if (rlist == NULL)
+	    rlist = rl;
+	  else
+	    {
+	      rl->next = rlist;
+	      rlist = rl;
+	    }
+	  list = list->next;
+	}
+
+      /* If we have a list of substitutions to do, then reverse it
+	 to get the replacements in the proper order. */
+
+      rlist = REVERSE_LIST (rlist, REPL *);
+
+      hlist = history_list ();
+
+      /* If we still have something in list, it is a command spec.
+	 Otherwise, we use the most recent command in time. */
+      command = fc_gethist (list ? list->word->word : (char *)NULL, hlist, 0);
+
+      if (command == NULL)
+	{
+	  builtin_error (_("no command found"));
+	  if (rlist)
+	    FREE_RLIST ();
+
+	  return (EXECUTION_FAILURE);
+	}
+
+      if (rlist)
+	{
+	  newcom = fc_dosubs (command, rlist);
+	  free (command);
+	  FREE_RLIST ();
+	  command = newcom;
+	}
+
+      fprintf (stderr, "%s\n", command);
+      fc_replhist (command);	/* replace `fc -s' with command */
+      /* Posix says that the re-executed commands should be entered into the
+	 history. */
+      return (parse_and_execute (command, "fc", SEVAL_NOHIST));
+    }
+
+  /* This is the second form of the command (the list-or-edit-and-rerun
+     form). */
+  hlist = history_list ();
+  if (hlist == 0)
+    return (EXECUTION_SUCCESS);
+  for (i = 0; hlist[i]; i++);
+
+  /* With the Bash implementation of history, the current command line
+     ("fc blah..." and so on) is already part of the history list by
+     the time we get to this point.  This just skips over that command
+     and makes the last command that this deals with be the last command
+     the user entered before the fc.  We need to check whether the
+     line was actually added (HISTIGNORE may have caused it to not be),
+     so we check hist_last_line_added. */
+
+  /* Even though command substitution through parse_and_execute turns off
+     remember_on_history, command substitution in a shell when set -o history
+     has been enabled (interactive or not) should use it in the last_hist
+     calculation as if it were on. */
+  rh = remember_on_history || ((subshell_environment & SUBSHELL_COMSUB) && enable_history_list);
+  last_hist = i - rh - hist_last_line_added;
+
+  /* Make sure that real_last is calculated the same way here and in
+     fc_gethnum.  The return value from fc_gethnum is treated specially if
+     it is == real_last and we are listing commands. */
+  real_last = i;
+  /* back up from the end to the last non-null history entry */
+  while (hlist[real_last] == 0 && real_last > 0)
+    real_last--;
+
+  /* XXX */
+  if (i == last_hist && hlist[last_hist] == 0)
+    while (last_hist >= 0 && hlist[last_hist] == 0)
+      last_hist--;
+  if (last_hist < 0)
+    last_hist = 0;		/* per POSIX */
+
+  if (list)
+    {
+      histbeg = fc_gethnum (list->word->word, hlist, listing|HN_FIRST);
+      list = list->next;
+
+      if (list)
+	histend = fc_gethnum (list->word->word, hlist, listing);
+      else if (histbeg == real_last)
+	histend = listing ? real_last : histbeg;
+      else
+	histend = listing ? last_hist : histbeg;
+    }
+  else
+    {
+      /* The default for listing is the last 16 history items. */
+      if (listing)
+	{
+	  histend = last_hist;
+	  histbeg = histend - 16 + 1;	/* +1 because loop below uses >= */
+	  if (histbeg < 0)
+	    histbeg = 0;
+	}
+      else
+	/* For editing, it is the last history command. */
+	histbeg = histend = last_hist;
+    }
+
+  if (histbeg == HIST_INVALID || histend == HIST_INVALID)
+    {
+      sh_erange ((char *)NULL, _("history specification")); 
+      return (EXECUTION_FAILURE);
+    }
+  else if (histbeg == HIST_ERANGE || histend == HIST_ERANGE)
+    {
+      sh_erange ((char *)NULL, _("history specification"));
+      return (EXECUTION_FAILURE);
+    }
+  else if (histbeg == HIST_NOTFOUND || histend == HIST_NOTFOUND)
+    {
+      builtin_error (_("no command found"));
+      return (EXECUTION_FAILURE);
+    }
+
+  /* We don't throw an error for line specifications out of range, per POSIX */
+  if (histbeg < 0)
+    histbeg = 0;
+  if (histend < 0)
+    histend = 0;
+
+  /* "When not listing, the fc command that caused the editing shall not be
+     entered into the history list." */
+  if (listing == 0 && hist_last_line_added)
+    {
+      bash_delete_last_history ();
+      /* If we're editing a single command -- the last command in the
+	 history -- and we just removed the dummy command added by
+	 edit_and_execute_command (), we need to check whether or not we
+	 just removed the last command in the history and need to back
+	 the pointer up.  remember_on_history is off because we're running
+	 in parse_and_execute(). */
+      if (histbeg == histend && histend == last_hist && hlist[last_hist] == 0)
+	last_hist = histbeg = --histend;
+
+      if (hlist[last_hist] == 0)
+	last_hist--;
+      if (histend >= last_hist)
+	histend = last_hist;
+      else if (histbeg >= last_hist)
+	histbeg = last_hist;
+    }
+
+  if (histbeg == HIST_INVALID || histend == HIST_INVALID)
+    {
+      sh_erange ((char *)NULL, _("history specification")); 
+      return (EXECUTION_FAILURE);
+    }
+  else if (histbeg == HIST_ERANGE || histend == HIST_ERANGE)
+    {
+      sh_erange ((char *)NULL, _("history specification"));
+      return (EXECUTION_FAILURE);
+    }
+  else if (histbeg == HIST_NOTFOUND || histend == HIST_NOTFOUND)
+    {
+      builtin_error (_("no command found"));
+      return (EXECUTION_FAILURE);
+    }
+
+  /* We don't throw an error for line specifications out of range, per POSIX */
+  if (histbeg < 0)
+    histbeg = 0;
+  if (histend < 0)
+    histend = 0;
+
+  if (histend < histbeg)
+    {
+      i = histend;
+      histend = histbeg;
+      histbeg = i;
+
+      reverse = 1;
+    }
+
+  if (listing)
+    stream = stdout;
+  else
+    {
+      numbering = 0;
+      stream = sh_mktmpfp ("bash-fc", MT_USERANDOM|MT_USETMPDIR, &fn);
+      if (stream == 0)
+	{
+	  builtin_error (_("%s: cannot open temp file: %s"), fn ? fn : "", strerror (errno));
+	  FREE (fn);
+	  return (EXECUTION_FAILURE);
+	}
+    }
+
+  for (i = reverse ? histend : histbeg; reverse ? i >= histbeg : i <= histend; reverse ? i-- : i++)
+    {
+      QUIT;
+      if (numbering)
+	fprintf (stream, "%d", i + history_base);
+      if (listing)
+	{
+	  if (posixly_correct)
+	    fputs ("\t", stream);
+	  else
+	    fprintf (stream, "\t%c", histdata (i) ? '*' : ' ');
+	}
+      fprintf (stream, "%s\n", histline (i));
+    }
+
+  if (listing)
+    return (sh_chkwrite (EXECUTION_SUCCESS));
+
+  fflush (stream);
+  if (ferror (stream))
+    {
+      sh_wrerror ();
+      fclose (stream);
+      FREE (fn);
+      return (EXECUTION_FAILURE);
+    }
+  fclose (stream);
+
+  /* Now edit the file of commands. */
+  if (ename)
+    {
+      command = (char *)xmalloc (strlen (ename) + strlen (fn) + 2);
+      sprintf (command, "%s %s", ename, fn);
+    }
+  else
+    {
+      fcedit = posixly_correct ? POSIX_FC_EDIT_COMMAND : FC_EDIT_COMMAND;
+      command = (char *)xmalloc (3 + strlen (fcedit) + strlen (fn));
+      sprintf (command, "%s %s", fcedit, fn);
+    }
+  retval = parse_and_execute (command, "fc", SEVAL_NOHIST);
+  if (retval != EXECUTION_SUCCESS)
+    {
+      unlink (fn);
+      free (fn);
+      return (EXECUTION_FAILURE);
+    }
+
+#if defined (READLINE)
+  /* If we're executing as part of a dispatched readline command like
+     {emacs,vi}_edit_and_execute_command, the readline state will indicate it.
+     We could remove the partial command from the history, but ksh93 doesn't
+     so we stay compatible. */
+#endif
+
+  /* Make sure parse_and_execute doesn't turn this off, even though a
+     call to parse_and_execute farther up the function call stack (e.g.,
+     if this is called by vi_edit_and_execute_command) may have already
+     called bash_history_disable. */
+  remember_on_history = 1;
+
+  /* Turn on the `v' flag while fc_execute_file runs so the commands
+     will be echoed as they are read by the parser. */
+  begin_unwind_frame ("fc builtin");
+  add_unwind_protect (xfree, fn);
+  add_unwind_protect (unlink, fn);
+  add_unwind_protect (set_verbose_flag, (char *)NULL);
+  unwind_protect_int (suppress_debug_trap_verbose);
+  echo_input_at_read = 1;
+  suppress_debug_trap_verbose = 1;
+
+  retval = fc_execute_file (fn);
+  run_unwind_frame ("fc builtin");
+
+  return (retval);
+}
+
+/* Return 1 if LIST->word->word is a legal number for fc's use. */
+static int
+fc_number (list)
+     WORD_LIST *list;
+{
+  char *s;
+
+  if (list == 0)
+    return 0;
+  s = list->word->word;
+  if (*s == '-')
+    s++;
+  return (legal_number (s, (intmax_t *)NULL));
+}
+
+/* Return an absolute index into HLIST which corresponds to COMMAND.  If
+   COMMAND is a number, then it was specified in relative terms.  If it
+   is a string, then it is the start of a command line present in HLIST.
+   MODE includes HN_LISTING if we are listing commands, and does not if we
+   are executing them. If MODE includes HN_FIRST we are looking for the
+   first history number specification. */
+static int
+fc_gethnum (command, hlist, mode)
+     char *command;
+     HIST_ENTRY **hlist;
+     int mode;
+{
+  int sign, n, clen, rh;
+  register int i, j, last_hist, real_last, listing;
+  register char *s;
+
+  listing = mode & HN_LISTING;
+  sign = 1;
+  /* Count history elements. */
+  for (i = 0; hlist[i]; i++);
+
+  /* With the Bash implementation of history, the current command line
+     ("fc blah..." and so on) is already part of the history list by
+     the time we get to this point.  This just skips over that command
+     and makes the last command that this deals with be the last command
+     the user entered before the fc.  We need to check whether the
+     line was actually added (HISTIGNORE may have caused it to not be),
+     so we check hist_last_line_added.  This needs to agree with the
+     calculation of last_hist in fc_builtin above. */
+  /* Even though command substitution through parse_and_execute turns off
+     remember_on_history, command substitution in a shell when set -o history
+     has been enabled (interactive or not) should use it in the last_hist
+     calculation as if it were on. */
+  rh = remember_on_history || ((subshell_environment & SUBSHELL_COMSUB) && enable_history_list);
+  last_hist = i - rh - hist_last_line_added;
+
+  if (i == last_hist && hlist[last_hist] == 0)
+    while (last_hist >= 0 && hlist[last_hist] == 0)
+      last_hist--;
+  if (last_hist < 0)
+    return (-1);
+
+  real_last = i;
+  i = last_hist;
+
+  /* No specification defaults to most recent command. */
+  if (command == NULL)
+    return (i);
+
+  /* back up from the end to the last non-null history entry */
+  while (hlist[real_last] == 0 && real_last > 0)
+    real_last--;
+
+  /* Otherwise, there is a specification.  It can be a number relative to
+     the current position, or an absolute history number. */
+  s = command;
+
+  /* Handle possible leading minus sign. */
+  if (s && (*s == '-'))
+    {
+      sign = -1;
+      s++;
+    }
+
+  if (s && DIGIT(*s))
+    {
+      n = atoi (s);
+      n *= sign;
+
+      /* We want to return something that is an offset to HISTORY_BASE. */
+
+      /* If the value is negative or zero, then it is an offset from
+	 the current history item. */
+      /* We don't use HN_FIRST here, so we don't return different values
+	 depending on whether we're looking for the first or last in a
+	 pair of range arguments, but nobody else does, either. */
+      if (n < 0)
+	{
+	  n += i + 1;
+	  return (n < 0 ? 0 : n);
+	}
+      else if (n == 0)
+	return ((sign == -1) ? (listing ? real_last : HIST_INVALID) : i);
+      else
+	{
+	  /* If we're out of range (greater than I (last history entry) or
+	     less than HISTORY_BASE, we want to return different values
+	     based on whether or not we are looking for the first or last
+	     value in a desired range of history entries. */
+	  n -= history_base;
+	  if (n < 0)
+	    return (mode & HN_FIRST ? 0 : i);
+	  else if (n >= i)
+	    return (mode & HN_FIRST ? 0 : i);
+	  else
+	    return n;
+	}
+    }
+
+  clen = strlen (command);
+  for (j = i; j >= 0; j--)
+    {
+      if (STREQN (command, histline (j), clen))
+	return (j);
+    }
+  return (HIST_NOTFOUND);
+}
+
+/* Locate the most recent history line which begins with
+   COMMAND in HLIST, and return a malloc()'ed copy of it.
+   MODE is 1 if we are listing commands, 0 if we are executing them. */
+static char *
+fc_gethist (command, hlist, mode)
+     char *command;
+     HIST_ENTRY **hlist;
+     int mode;
+{
+  int i;
+
+  if (hlist == 0)
+    return ((char *)NULL);
+
+  i = fc_gethnum (command, hlist, mode);
+
+  if (i >= 0)
+    return (savestring (histline (i)));
+  else
+    return ((char *)NULL);
+}
+
+#ifdef INCLUDE_UNUSED
+/* Read the edited history lines from STREAM and return them
+   one at a time.  This can read unlimited length lines.  The
+   caller should free the storage. */
+static char *
+fc_readline (stream)
+     FILE *stream;
+{
+  register int c;
+  int line_len = 0, lindex = 0;
+  char *line = (char *)NULL;
+
+  while ((c = getc (stream)) != EOF)
+    {
+      if ((lindex + 2) >= line_len)
+	line = (char *)xrealloc (line, (line_len += 128));
+
+      if (c == '\n')
+	{
+	  line[lindex++] = '\n';
+	  line[lindex++] = '\0';
+	  return (line);
+	}
+      else
+	line[lindex++] = c;
+    }
+
+  if (!lindex)
+    {
+      if (line)
+	free (line);
+
+      return ((char *)NULL);
+    }
+
+  if (lindex + 2 >= line_len)
+    line = (char *)xrealloc (line, lindex + 3);
+
+  line[lindex++] = '\n';	    /* Finish with newline if none in file */
+  line[lindex++] = '\0';
+  return (line);
+}
+#endif
+
+/* Perform the SUBS on COMMAND.
+   SUBS is a list of substitutions, and COMMAND is a simple string.
+   Return a pointer to a malloc'ed string which contains the substituted
+   command. */
+static char *
+fc_dosubs (command, subs)
+     char *command;
+     REPL *subs;
+{
+  register char *new, *t;
+  register REPL *r;
+
+  for (new = savestring (command), r = subs; r; r = r->next)
+    {
+      t = strsub (new, r->pat, r->rep, 1);
+      free (new);
+      new = t;
+    }
+  return (new);
+}
+
+/* Use `command' to replace the last entry in the history list, which,
+   by this time, is `fc blah...'.  The intent is that the new command
+   become the history entry, and that `fc' should never appear in the
+   history list.  This way you can do `r' to your heart's content. */
+static void
+fc_replhist (command)
+     char *command;
+{
+  int n;
+
+  if (command == 0 || *command == '\0')
+    return;
+
+  n = strlen (command);
+  if (command[n - 1] == '\n')
+    command[n - 1] = '\0';
+
+  if (command && *command)
+    {
+      bash_delete_last_history ();
+      maybe_add_history (command);	/* Obeys HISTCONTROL setting. */
+    }
+}
+
+#ifdef INCLUDE_UNUSED
+/* Add LINE to the history, after removing a single trailing newline. */
+static void
+fc_addhist (line)
+     char *line;
+{
+  register int n;
+
+  if (line == 0 || *line == 0)
+    return;
+
+  n = strlen (line);
+
+  if (line[n - 1] == '\n')
+    line[n - 1] = '\0';
+
+  if (line && *line)
+    maybe_add_history (line);		/* Obeys HISTCONTROL setting. */
+}
+#endif
+
+#endif /* HISTORY */
diff --git a/builtins/fg_bg.def b/builtins/fg_bg.def
new file mode 100644
index 0000000..0fb5322
--- /dev/null
+++ b/builtins/fg_bg.def
@@ -0,0 +1,189 @@
+This file is fg_bg.def, from which is created fg_bg.c.
+It implements the builtins "bg" and "fg" in Bash.
+
+Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES fg_bg.c
+
+$BUILTIN fg
+$FUNCTION fg_builtin
+$DEPENDS_ON JOB_CONTROL
+$SHORT_DOC fg [job_spec]
+Move job to the foreground.
+
+Place the job identified by JOB_SPEC in the foreground, making it the
+current job.  If JOB_SPEC is not present, the shell's notion of the
+current job is used.
+
+Exit Status:
+Status of command placed in foreground, or failure if an error occurs.
+$END
+
+#include <config.h>
+
+#include "../bashtypes.h"
+#include <signal.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "../bashintl.h"
+
+#include "../shell.h"
+#include "../execute_cmd.h"
+#include "../jobs.h"
+#include "common.h"
+#include "bashgetopt.h"
+
+#if defined (JOB_CONTROL)
+static int fg_bg PARAMS((WORD_LIST *, int));
+
+/* How to bring a job into the foreground. */
+int
+fg_builtin (list)
+     WORD_LIST *list;
+{
+  int fg_bit;
+  register WORD_LIST *t;
+
+  CHECK_HELPOPT (list);
+
+  if (job_control == 0)
+    {
+      sh_nojobs ((char *)NULL);
+      return (EXECUTION_FAILURE);
+    }
+
+  if (no_options (list))
+    return (EX_USAGE);
+  list = loptend;
+
+  /* If the last arg on the line is '&', then start this job in the
+     background.  Else, fg the job. */
+  for (t = list; t && t->next; t = t->next)
+    ;
+  fg_bit = (t && t->word->word[0] == '&' && t->word->word[1] == '\0') == 0;
+
+  return (fg_bg (list, fg_bit));
+}
+#endif /* JOB_CONTROL */
+
+$BUILTIN bg
+$FUNCTION bg_builtin
+$DEPENDS_ON JOB_CONTROL
+$SHORT_DOC bg [job_spec ...]
+Move jobs to the background.
+
+Place the jobs identified by each JOB_SPEC in the background, as if they
+had been started with `&'.  If JOB_SPEC is not present, the shell's notion
+of the current job is used.
+
+Exit Status:
+Returns success unless job control is not enabled or an error occurs.
+$END
+
+#if defined (JOB_CONTROL)
+/* How to put a job into the background. */
+int
+bg_builtin (list)
+     WORD_LIST *list;
+{
+  int r;
+
+  CHECK_HELPOPT (list);
+
+  if (job_control == 0)
+    {
+      sh_nojobs ((char *)NULL);
+      return (EXECUTION_FAILURE);
+    }
+
+  if (no_options (list))
+    return (EX_USAGE);
+  list = loptend;
+
+  /* This relies on the fact that fg_bg() takes a WORD_LIST *, but only acts
+     on the first member (if any) of that list. */
+  r = EXECUTION_SUCCESS;
+  do
+    {
+      if (fg_bg (list, 0) == EXECUTION_FAILURE)
+	r = EXECUTION_FAILURE;
+      if (list)
+	list = list->next;
+    }
+  while (list);
+
+  return r;
+}
+
+/* How to put a job into the foreground/background. */
+static int
+fg_bg (list, foreground)
+     WORD_LIST *list;
+     int foreground;
+{
+  sigset_t set, oset;
+  int job, status, old_async_pid;
+  JOB *j;
+
+  BLOCK_CHILD (set, oset);
+  job = get_job_spec (list);
+
+  if (INVALID_JOB (job))
+    {
+      if (job != DUP_JOB)
+	sh_badjob (list ? list->word->word : _("current"));
+
+      goto failure;
+    }
+
+  j = get_job_by_jid (job);
+  /* Or if j->pgrp == shell_pgrp. */
+  if (IS_JOBCONTROL (job) == 0)
+    {
+      builtin_error (_("job %d started without job control"), job + 1);
+      goto failure;
+    }
+
+  if (foreground == 0)
+    {
+      old_async_pid = last_asynchronous_pid;
+      last_asynchronous_pid = j->pgrp;	/* As per Posix.2 5.4.2 */
+    }
+
+  status = start_job (job, foreground);
+
+  if (status >= 0)
+    {
+    /* win: */
+      UNBLOCK_CHILD (oset);
+      return (foreground ? status : EXECUTION_SUCCESS);
+    }
+  else
+    {
+      if (foreground == 0)
+	last_asynchronous_pid = old_async_pid;
+
+    failure:
+      UNBLOCK_CHILD (oset);
+      return (EXECUTION_FAILURE);
+    }
+}
+#endif /* JOB_CONTROL */
diff --git a/builtins/gen-helpfiles.c b/builtins/gen-helpfiles.c
new file mode 100644
index 0000000..6bed447
--- /dev/null
+++ b/builtins/gen-helpfiles.c
@@ -0,0 +1,197 @@
+/* gen-helpfiles - create files containing builtin help text */
+
+/* Copyright (C) 2012-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* This links with a specially-generated version of builtins.c and takes
+   the long_doc members of each struct builtin element and writes those to
+   the file named by the `handle' member of the struct builtin element. */
+
+#if !defined (CROSS_COMPILING) 
+#  include <config.h>
+#else	/* CROSS_COMPILING */
+/* A conservative set of defines based on POSIX/SUS3/XPG6 */
+#  define HAVE_UNISTD_H
+#  define HAVE_STRING_H
+#  define HAVE_STDLIB_H
+
+#  define HAVE_RENAME
+#endif /* CROSS_COMPILING */
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#ifndef _MINIX
+#  include "../bashtypes.h"
+#  if defined (HAVE_SYS_FILE_H)
+#    include <sys/file.h>
+#  endif
+#endif
+
+#include "posixstat.h"
+#include "filecntl.h"
+
+#include "../bashansi.h"
+#include <stdio.h>
+#include <errno.h>
+
+#include "stdc.h"
+
+#include "../builtins.h"
+#include "tmpbuiltins.h"
+
+#if defined (USING_BASH_MALLOC)
+#undef xmalloc
+#undef xrealloc
+#undef xfree
+
+#undef free		/* defined in xmalloc.h */
+#endif
+
+#ifndef errno
+extern int errno;
+#endif
+
+#if !defined (__STDC__) && !defined (strcpy)
+extern char *strcpy ();
+#endif /* !__STDC__ && !strcpy */
+
+#define whitespace(c) (((c) == ' ') || ((c) == '\t'))
+
+/* Flag values that builtins can have. */
+#define BUILTIN_FLAG_SPECIAL	0x01
+#define BUILTIN_FLAG_ASSIGNMENT 0x02
+#define BUILTIN_FLAG_POSIX_BUILTIN 0x04
+
+#define BASE_INDENT	4
+
+/* Non-zero means to produce separate help files for each builtin, named by
+   the builtin name, in `./helpfiles'. */
+int separate_helpfiles = 0;
+
+/* Non-zero means to create single C strings for each `longdoc', with
+   embedded newlines, for ease of translation. */
+int single_longdoc_strings = 1;
+
+/* The name of a directory into which the separate external help files will
+   eventually be installed. */
+char *helpfile_directory;
+
+/* Forward declarations. */
+
+int write_helpfiles PARAMS((struct builtin *));
+
+/* For each file mentioned on the command line, process it and
+   write the information to STRUCTFILE and EXTERNFILE, while
+   creating the production file if necessary. */
+int
+main (argc, argv)
+     int argc;
+     char **argv;
+{
+  int arg_index = 1;
+
+  while (arg_index < argc && argv[arg_index][0] == '-')
+    {
+      char *arg = argv[arg_index++];
+
+      if (strcmp (arg, "-noproduction") == 0)
+	;
+      else if (strcmp (arg, "-H") == 0)
+	helpfile_directory = argv[arg_index++];
+      else if (strcmp (arg, "-S") == 0)
+	single_longdoc_strings = 0;
+      else
+	{
+	  fprintf (stderr, "%s: Unknown flag %s.\n", argv[0], arg);
+	  exit (2);
+	}
+    }
+
+  write_helpfiles(shell_builtins);
+
+  exit (0);
+}
+
+/* Write DOCUMENTATION to STREAM, perhaps surrounding it with double-quotes
+   and quoting special characters in the string.  Handle special things for
+   internationalization (gettext) and the single-string vs. multiple-strings
+   issues. */
+void
+write_documentation (stream, documentation, indentation)
+     FILE *stream;
+     char *documentation;
+     int indentation;
+{
+  if (stream == 0)
+    return;
+
+  if (documentation)
+    fprintf (stream, "%*s%s\n", indentation, " ", documentation);
+}
+
+int
+write_helpfiles (builtins)
+     struct builtin *builtins;
+{
+  char *helpfile, *bname, *fname;
+  FILE *helpfp;
+  int i, hdlen;
+  struct builtin b;
+
+  i = mkdir ("helpfiles", 0777);
+  if (i < 0 && errno != EEXIST)
+    {
+      fprintf (stderr, "write_helpfiles: helpfiles: cannot create directory\n");
+      return -1;
+    }
+
+  hdlen = strlen ("helpfiles/");
+  for (i = 0; i < num_shell_builtins; i++)
+    {
+      b = builtins[i];
+
+      fname = (char *)b.handle;
+      helpfile = (char *)malloc (hdlen + strlen (fname) + 1);
+      if (helpfile == 0)
+	{
+	  fprintf (stderr, "gen-helpfiles: cannot allocate memory\n");
+	  exit (1);
+	}
+      sprintf (helpfile, "helpfiles/%s", fname);
+
+      helpfp = fopen (helpfile, "w");
+      if (helpfp == 0)
+	{
+	  fprintf (stderr, "write_helpfiles: cannot open %s\n", helpfile);
+	  free (helpfile);
+	  continue;
+	}
+
+      write_documentation (helpfp, b.long_doc[0], 4);
+
+      fflush (helpfp);
+      fclose (helpfp);
+      free (helpfile);
+    }
+  return 0;
+}
diff --git a/builtins/getopt.c b/builtins/getopt.c
new file mode 100644
index 0000000..9529bc3
--- /dev/null
+++ b/builtins/getopt.c
@@ -0,0 +1,355 @@
+/* getopt.c - getopt for Bash.  Used by the getopt builtin. */
+
+/* Copyright (C) 1993-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include "memalloc.h"
+#include "../bashintl.h"
+#include "../shell.h"
+#include "getopt.h"
+
+/* For communication from `sh_getopt' to the caller.
+   When `sh_getopt' finds an option that takes an argument,
+   the argument value is returned here. */
+char *sh_optarg = 0;
+
+/* Index in ARGV of the next element to be scanned.
+   This is used for communication to and from the caller
+   and for communication between successive calls to `sh_getopt'.
+
+   On entry to `sh_getopt', zero means this is the first call; initialize.
+
+   When `sh_getopt' returns EOF, this is the index of the first of the
+   non-option elements that the caller should itself scan.
+
+   Otherwise, `sh_optind' communicates from one call to the next
+   how much of ARGV has been scanned so far.  */
+
+/* XXX 1003.2 says this must be 1 before any call.  */
+int sh_optind = 0;
+
+/* Index of the current argument. */
+static int sh_curopt;
+
+/* The next char to be scanned in the option-element
+   in which the last option character we returned was found.
+   This allows us to pick up the scan where we left off.
+
+   If this is zero, or a null string, it means resume the scan
+   by advancing to the next ARGV-element.  */
+
+static char *nextchar;
+static int sh_charindex;
+
+/* Callers store zero here to inhibit the error message
+   for unrecognized options.  */
+
+int sh_opterr = 1;
+
+/* Set to an option character which was unrecognized.
+   This must be initialized on some systems to avoid linking in the
+   system's own getopt implementation.  */
+
+int sh_optopt = '?';
+
+/* Set to 1 when we see an invalid option; public so getopts can reset it. */
+int sh_badopt = 0;
+
+/* Scan elements of ARGV (whose length is ARGC) for option characters
+   given in OPTSTRING.
+
+   If an element of ARGV starts with '-', and is not exactly "-" or "--",
+   then it is an option element.  The characters of this element
+   (aside from the initial '-') are option characters.  If `sh_getopt'
+   is called repeatedly, it returns successively each of the option characters
+   from each of the option elements.
+
+   If `sh_getopt' finds another option character, it returns that character,
+   updating `sh_optind' and `nextchar' so that the next call to `sh_getopt' can
+   resume the scan with the following option character or ARGV-element.
+
+   If there are no more option characters, `sh_getopt' returns `EOF'.
+   Then `sh_optind' is the index in ARGV of the first ARGV-element
+   that is not an option.
+
+   OPTSTRING is a string containing the legitimate option characters.
+   If an option character is seen that is not listed in OPTSTRING,
+   return '?' after printing an error message.  If you set `sh_opterr' to
+   zero, the error message is suppressed but we still return '?'.
+
+   If a char in OPTSTRING is followed by a colon, that means it wants an arg,
+   so the following text in the same ARGV-element, or the text of the following
+   ARGV-element, is returned in `sh_optarg'. */
+
+/* 1003.2 specifies the format of this message.  */
+#define BADOPT(x)  fprintf (stderr, _("%s: illegal option -- %c\n"), argv[0], x)
+#define NEEDARG(x) fprintf (stderr, _("%s: option requires an argument -- %c\n"), argv[0], x)
+
+int
+sh_getopt (argc, argv, optstring)
+     int argc;
+     char *const *argv;
+     const char *optstring;
+{
+  char c, *temp;
+
+  sh_optarg = 0;
+
+  if (sh_optind >= argc || sh_optind < 0)	/* XXX was sh_optind > argc */
+    {
+      sh_optind = argc;
+      return (EOF);
+    }
+
+  /* Initialize the internal data when the first call is made.
+     Start processing options with ARGV-element 1 (since ARGV-element 0
+     is the program name); the sequence of previously skipped
+     non-option ARGV-elements is empty.  */
+
+  if (sh_optind == 0)
+    {
+      sh_optind = 1;
+      nextchar = (char *)NULL;
+    }
+
+  if (nextchar == 0 || *nextchar == '\0')
+    {
+      /* If we have done all the ARGV-elements, stop the scan. */
+      if (sh_optind >= argc)
+	return EOF;
+
+      temp = argv[sh_optind];
+
+      /* Special ARGV-element `--' means premature end of options.
+	 Skip it like a null option, and return EOF. */
+      if (temp[0] == '-' && temp[1] == '-' && temp[2] == '\0')
+	{
+	  sh_optind++;
+	  return EOF;
+	}
+
+      /* If we have come to a non-option, either stop the scan or describe
+	 it to the caller and pass it by.  This makes the pseudo-option
+	 `-' mean the end of options, but does not skip over it. */
+      if (temp[0] != '-' || temp[1] == '\0')
+	return EOF;
+
+      /* We have found another option-ARGV-element.
+	 Start decoding its characters.  */
+      nextchar = argv[sh_curopt = sh_optind] + 1;
+      sh_charindex = 1;
+    }
+
+  /* Look at and handle the next option-character.  */
+
+  c = *nextchar++; sh_charindex++;
+  temp = strchr (optstring, c);
+
+  sh_optopt = c;
+
+  /* Increment `sh_optind' when we start to process its last character.  */
+  if (nextchar == 0 || *nextchar == '\0')
+    {
+      sh_optind++;
+      nextchar = (char *)NULL;
+    }
+
+  if (sh_badopt = (temp == NULL || c == ':'))
+    {
+      if (sh_opterr)
+	BADOPT (c);
+
+      return '?';
+    }
+
+  if (temp[1] == ':')
+    {
+      if (nextchar && *nextchar)
+	{
+	  /* This is an option that requires an argument.  */
+	  sh_optarg = nextchar;
+	  /* If we end this ARGV-element by taking the rest as an arg,
+	     we must advance to the next element now.  */
+	  sh_optind++;
+	}
+      else if (sh_optind == argc)
+	{
+	  if (sh_opterr)
+	    NEEDARG (c);
+
+	  sh_optopt = c;
+	  sh_optarg = "";	/* Needed by getopts. */
+	  c = (optstring[0] == ':') ? ':' : '?';
+	}
+      else
+	/* We already incremented `sh_optind' once;
+	   increment it again when taking next ARGV-elt as argument.  */
+	sh_optarg = argv[sh_optind++];
+      nextchar = (char *)NULL;
+    }
+  return c;
+}
+
+void
+sh_getopt_restore_state (argv)
+     char **argv;
+{
+  if (nextchar)
+    nextchar = argv[sh_curopt] + sh_charindex;
+}
+
+sh_getopt_state_t *
+sh_getopt_alloc_istate ()
+{
+  sh_getopt_state_t *ret;
+
+  ret = (sh_getopt_state_t *)xmalloc (sizeof (sh_getopt_state_t));
+  return ret;
+}
+
+void
+sh_getopt_dispose_istate (gs)
+     sh_getopt_state_t *gs;
+{
+  free (gs);
+}
+
+sh_getopt_state_t *
+sh_getopt_save_istate ()
+{
+  sh_getopt_state_t *ret;
+
+  ret = sh_getopt_alloc_istate ();
+
+  ret->gs_optarg = sh_optarg;
+  ret->gs_optind = sh_optind;
+  ret->gs_curopt = sh_curopt;
+  ret->gs_nextchar = nextchar;		/* XXX */
+  ret->gs_charindex = sh_charindex;
+  ret->gs_flags = 0;			/* XXX for later use */
+
+  return ret;
+}
+
+void
+sh_getopt_restore_istate (state)
+     sh_getopt_state_t *state;
+{
+  sh_optarg = state->gs_optarg;
+  sh_optind = state->gs_optind;
+  sh_curopt = state->gs_curopt;
+  nextchar = state->gs_nextchar;	/* XXX - probably not usable */
+  sh_charindex = state->gs_charindex;
+
+  sh_getopt_dispose_istate (state);
+}
+
+#if 0
+void
+sh_getopt_debug_restore_state (argv)
+     char **argv;
+{
+  if (nextchar && nextchar != argv[sh_curopt] + sh_charindex)
+    {
+      itrace("sh_getopt_debug_restore_state: resetting nextchar");
+      nextchar = argv[sh_curopt] + sh_charindex;
+    }
+}
+#endif
+ 
+#ifdef TEST
+
+/* Compile with -DTEST to make an executable for use in testing
+   the above definition of `sh_getopt'.  */
+
+int
+main (argc, argv)
+     int argc;
+     char **argv;
+{
+  int c;
+  int digit_sh_optind = 0;
+
+  while (1)
+    {
+      int this_option_sh_optind = sh_optind ? sh_optind : 1;
+
+      c = sh_getopt (argc, argv, "abc:d:0123456789");
+      if (c == EOF)
+	break;
+
+      switch (c)
+	{
+	case '0':
+	case '1':
+	case '2':
+	case '3':
+	case '4':
+	case '5':
+	case '6':
+	case '7':
+	case '8':
+	case '9':
+	  if (digit_sh_optind != 0 && digit_sh_optind != this_option_sh_optind)
+	    printf ("digits occur in two different argv-elements.\n");
+	  digit_sh_optind = this_option_sh_optind;
+	  printf ("option %c\n", c);
+	  break;
+
+	case 'a':
+	  printf ("option a\n");
+	  break;
+
+	case 'b':
+	  printf ("option b\n");
+	  break;
+
+	case 'c':
+	  printf ("option c with value `%s'\n", sh_optarg);
+	  break;
+
+	case '?':
+	  break;
+
+	default:
+	  printf ("?? sh_getopt returned character code 0%o ??\n", c);
+	}
+    }
+
+  if (sh_optind < argc)
+    {
+      printf ("non-option ARGV-elements: ");
+      while (sh_optind < argc)
+	printf ("%s ", argv[sh_optind++]);
+      printf ("\n");
+    }
+
+  exit (0);
+}
+
+#endif /* TEST */
diff --git a/builtins/getopt.h b/builtins/getopt.h
new file mode 100644
index 0000000..fd97859
--- /dev/null
+++ b/builtins/getopt.h
@@ -0,0 +1,82 @@
+/* getopt.h - declarations for getopt. */
+
+/* Copyright (C) 1989-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* XXX THIS HAS BEEN MODIFIED FOR INCORPORATION INTO BASH XXX */
+
+#ifndef _SH_GETOPT_H
+#define _SH_GETOPT_H 1
+
+#include "stdc.h"
+
+/* For communication from `getopt' to the caller.
+   When `getopt' finds an option that takes an argument,
+   the argument value is returned here.
+   Also, when `ordering' is RETURN_IN_ORDER,
+   each non-option ARGV-element is returned here.  */
+
+extern char *sh_optarg;
+
+/* Index in ARGV of the next element to be scanned.
+   This is used for communication to and from the caller
+   and for communication between successive calls to `getopt'.
+
+   On entry to `getopt', zero means this is the first call; initialize.
+
+   When `getopt' returns EOF, this is the index of the first of the
+   non-option elements that the caller should itself scan.
+
+   Otherwise, `sh_optind' communicates from one call to the next
+   how much of ARGV has been scanned so far.  */
+
+extern int sh_optind;
+
+/* Callers store zero here to inhibit the error message `getopt' prints
+   for unrecognized options.  */
+
+extern int sh_opterr;
+
+/* Set to an option character which was unrecognized.  */
+
+extern int sh_optopt;
+
+/* Set to 1 when an unrecognized option is encountered. */
+extern int sh_badopt;
+
+extern int sh_getopt PARAMS((int, char *const *, const char *));
+
+typedef struct sh_getopt_state
+{
+  char *gs_optarg;
+  int gs_optind;
+  int gs_curopt;
+  char *gs_nextchar;
+  int gs_charindex;
+  int gs_flags;
+} sh_getopt_state_t;
+
+extern void sh_getopt_restore_state PARAMS((char **));
+
+extern sh_getopt_state_t *sh_getopt_alloc_istate PARAMS((void));
+extern void sh_getopt_dispose_istate PARAMS((sh_getopt_state_t *));
+
+extern sh_getopt_state_t *sh_getopt_save_istate PARAMS((void));
+extern void sh_getopt_restore_istate PARAMS((sh_getopt_state_t *));
+
+#endif /* _SH_GETOPT_H */
diff --git a/builtins/getopts.def b/builtins/getopts.def
new file mode 100644
index 0000000..4c39c47
--- /dev/null
+++ b/builtins/getopts.def
@@ -0,0 +1,343 @@
+This file is getopts.def, from which is created getopts.c.
+It implements the builtin "getopts" in Bash.
+
+Copyright (C) 1987-2019 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES getopts.c
+
+$BUILTIN getopts
+$FUNCTION getopts_builtin
+$SHORT_DOC getopts optstring name [arg ...]
+Parse option arguments.
+
+Getopts is used by shell procedures to parse positional parameters
+as options.
+
+OPTSTRING contains the option letters to be recognized; if a letter
+is followed by a colon, the option is expected to have an argument,
+which should be separated from it by white space.
+
+Each time it is invoked, getopts will place the next option in the
+shell variable $name, initializing name if it does not exist, and
+the index of the next argument to be processed into the shell
+variable OPTIND.  OPTIND is initialized to 1 each time the shell or
+a shell script is invoked.  When an option requires an argument,
+getopts places that argument into the shell variable OPTARG.
+
+getopts reports errors in one of two ways.  If the first character
+of OPTSTRING is a colon, getopts uses silent error reporting.  In
+this mode, no error messages are printed.  If an invalid option is
+seen, getopts places the option character found into OPTARG.  If a
+required argument is not found, getopts places a ':' into NAME and
+sets OPTARG to the option character found.  If getopts is not in
+silent mode, and an invalid option is seen, getopts places '?' into
+NAME and unsets OPTARG.  If a required argument is not found, a '?'
+is placed in NAME, OPTARG is unset, and a diagnostic message is
+printed.
+
+If the shell variable OPTERR has the value 0, getopts disables the
+printing of error messages, even if the first character of
+OPTSTRING is not a colon.  OPTERR has the value 1 by default.
+
+Getopts normally parses the positional parameters, but if arguments
+are supplied as ARG values, they are parsed instead.
+
+Exit Status:
+Returns success if an option is found; fails if the end of options is
+encountered or an error occurs.
+$END
+
+#include <config.h>
+
+#include <stdio.h>
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include "../bashansi.h"
+#include "../bashintl.h"
+
+#include "../shell.h"
+#include "../execute_cmd.h"
+#include "common.h"
+#include "bashgetopt.h"
+#include "getopt.h"
+
+#define G_EOF		-1
+#define G_INVALID_OPT	-2
+#define G_ARG_MISSING	-3
+
+static int getopts_unbind_variable PARAMS((char *));
+static int getopts_bind_variable PARAMS((char *, char *));
+static int dogetopts PARAMS((int, char **));
+
+/* getopts_reset is magic code for when OPTIND is reset.  N is the
+   value that has just been assigned to OPTIND. */
+void
+getopts_reset (newind)
+     int newind;
+{
+  sh_optind = newind;
+  sh_badopt = 0;
+}
+
+static int
+getopts_unbind_variable (name)
+     char *name;
+{
+#if 0
+  return (unbind_variable (name));
+#else
+  return (unbind_variable_noref (name));
+#endif
+}
+
+static int
+getopts_bind_variable (name, value)
+     char *name, *value;
+{
+  SHELL_VAR *v;
+
+  if (legal_identifier (name))
+    {
+      v = bind_variable (name, value, 0);
+      if (v && (readonly_p (v) || noassign_p (v)))
+	return (EX_MISCERROR);
+      return (v ? EXECUTION_SUCCESS : EXECUTION_FAILURE);
+    }
+  else
+    {
+      sh_invalidid (name);
+      return (EXECUTION_FAILURE);
+    }
+}
+
+/* Error handling is now performed as specified by Posix.2, draft 11
+   (identical to that of ksh-88).  The special handling is enabled if
+   the first character of the option string is a colon; this handling
+   disables diagnostic messages concerning missing option arguments
+   and invalid option characters.  The handling is as follows.
+
+   INVALID OPTIONS:
+        name -> "?"
+        if (special_error) then
+                OPTARG = option character found
+                no error output
+        else
+                OPTARG unset
+                diagnostic message
+        fi
+ 
+  MISSING OPTION ARGUMENT;
+        if (special_error) then
+                name -> ":"
+                OPTARG = option character found
+        else
+                name -> "?"
+                OPTARG unset
+                diagnostic message
+        fi
+ */
+
+static int
+dogetopts (argc, argv)
+     int argc;
+     char **argv;
+{
+  int ret, special_error, old_opterr, i, n;
+  char strval[2], numval[16];
+  char *optstr;			/* list of options */
+  char *name;			/* variable to get flag val */
+  char *t;
+
+  if (argc < 3)
+    {
+      builtin_usage ();
+      return (EX_USAGE);
+    }
+
+  /* argv[0] is "getopts". */
+
+  optstr = argv[1];
+  name = argv[2];
+  argc -= 2;
+  argv += 2;
+
+  special_error = optstr[0] == ':';
+
+  if (special_error)
+    {
+      old_opterr = sh_opterr;
+      optstr++;
+      sh_opterr = 0;		/* suppress diagnostic messages */
+    }
+
+  if (argc > 1)
+    {
+      sh_getopt_restore_state (argv);
+      t = argv[0];
+      argv[0] = dollar_vars[0];
+      ret = sh_getopt (argc, argv, optstr);
+      argv[0] = t;
+    }
+  else if (rest_of_args == (WORD_LIST *)NULL)
+    {
+      for (i = 0; i < 10 && dollar_vars[i]; i++)
+	;
+
+      sh_getopt_restore_state (dollar_vars);
+      ret = sh_getopt (i, dollar_vars, optstr);
+    }
+  else
+    {
+      register WORD_LIST *words;
+      char **v;
+
+      i = number_of_args () + 1;	/* +1 for $0 */
+      v = strvec_create (i + 1);
+      for (i = 0; i < 10 && dollar_vars[i]; i++)
+	v[i] = dollar_vars[i];
+      for (words = rest_of_args; words; words = words->next, i++)
+	v[i] = words->word->word;
+      v[i] = (char *)NULL;
+      sh_getopt_restore_state (v);
+      ret = sh_getopt (i, v, optstr);
+      free (v);
+    }
+
+  if (special_error)
+    sh_opterr = old_opterr;
+
+  /* Set the OPTIND variable in any case, to handle "--" skipping.  It's
+     highly unlikely that 14 digits will be too few. */
+  if (sh_optind < 10)
+    {
+      numval[14] = sh_optind + '0';
+      numval[15] = '\0';
+      i = 14;
+    }
+  else
+    {
+      numval[i = 15] = '\0';
+      n = sh_optind;
+      do
+	{
+	  numval[--i] = (n % 10) + '0';
+	}
+      while (n /= 10);
+    }
+  bind_variable ("OPTIND", numval + i, 0);
+
+  /* If an error occurred, decide which one it is and set the return
+     code appropriately.  In all cases, the option character in error
+     is in OPTOPT.  If an invalid option was encountered, OPTARG is
+     NULL.  If a required option argument was missing, OPTARG points
+     to a NULL string (that is, sh_optarg[0] == 0). */
+  if (ret == '?')
+    {
+      if (sh_optarg == NULL)
+	ret = G_INVALID_OPT;
+      else if (sh_optarg[0] == '\0')
+	ret = G_ARG_MISSING;
+    }
+	    
+  if (ret == G_EOF)
+    {
+      getopts_unbind_variable ("OPTARG");
+      getopts_bind_variable (name, "?");
+      return (EXECUTION_FAILURE);
+    }
+
+  if (ret == G_INVALID_OPT)
+    {
+      /* Invalid option encountered. */
+      ret = getopts_bind_variable (name, "?");
+
+      if (special_error)
+	{
+	  strval[0] = (char)sh_optopt;
+	  strval[1] = '\0';
+	  bind_variable ("OPTARG", strval, 0);
+	}
+      else
+	getopts_unbind_variable ("OPTARG");
+
+      return (ret);
+    }
+
+  if (ret == G_ARG_MISSING)
+    {
+      /* Required argument missing. */
+      if (special_error)
+	{
+	  ret = getopts_bind_variable (name, ":");
+
+	  strval[0] = (char)sh_optopt;
+	  strval[1] = '\0';
+	  bind_variable ("OPTARG", strval, 0);
+	}
+      else
+	{
+	  ret = getopts_bind_variable (name, "?");
+	  getopts_unbind_variable ("OPTARG");
+	}
+      return (ret);
+    }			
+
+  bind_variable ("OPTARG", sh_optarg, 0);
+
+  strval[0] = (char) ret;
+  strval[1] = '\0';
+  return (getopts_bind_variable (name, strval));
+}
+
+/* The getopts builtin.  Build an argv, and call dogetopts with it. */
+int
+getopts_builtin (list)
+     WORD_LIST *list;
+{
+  char **av;
+  int ac, ret;
+
+  if (list == 0)
+    {
+      builtin_usage ();
+      return EX_USAGE;
+    }
+
+  reset_internal_getopt ();
+  if ((ret = internal_getopt (list, "")) != -1)
+    {
+      if (ret == GETOPT_HELP)
+	builtin_help ();
+      else
+	builtin_usage ();
+      return (EX_USAGE);
+    }
+  list = loptend;
+
+  av = make_builtin_argv (list, &ac);
+  ret = dogetopts (ac, av);
+  free ((char *)av);
+
+  return (ret);
+}
diff --git a/builtins/hash.def b/builtins/hash.def
new file mode 100644
index 0000000..c58e91c
--- /dev/null
+++ b/builtins/hash.def
@@ -0,0 +1,305 @@
+This file is hash.def, from which is created hash.c.
+It implements the builtin "hash" in Bash.
+
+Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES hash.c
+
+$BUILTIN hash
+$FUNCTION hash_builtin
+$SHORT_DOC hash [-lr] [-p pathname] [-dt] [name ...]
+Remember or display program locations.
+
+Determine and remember the full pathname of each command NAME.  If
+no arguments are given, information about remembered commands is displayed.
+
+Options:
+  -d	forget the remembered location of each NAME
+  -l	display in a format that may be reused as input
+  -p pathname	use PATHNAME as the full pathname of NAME
+  -r	forget all remembered locations
+  -t	print the remembered location of each NAME, preceding
+		each location with the corresponding NAME if multiple
+		NAMEs are given
+Arguments:
+  NAME	Each NAME is searched for in $PATH and added to the list
+		of remembered commands.
+
+Exit Status:
+Returns success unless NAME is not found or an invalid option is given.
+$END
+
+#include <config.h>
+
+#include <stdio.h>
+
+#include "../bashtypes.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <errno.h>
+
+#include "../bashansi.h"
+#include "../bashintl.h"
+
+#include "../shell.h"
+#include "../builtins.h"
+#include "../execute_cmd.h"
+#include "../flags.h"
+#include "../findcmd.h"
+#include "../hashcmd.h"
+#include "common.h"
+#include "bashgetopt.h"
+
+extern int dot_found_in_search;
+
+static int add_hashed_command PARAMS((char *, int));
+static int print_hash_info PARAMS((BUCKET_CONTENTS *));
+static int print_portable_hash_info PARAMS((BUCKET_CONTENTS *));
+static int print_hashed_commands PARAMS((int));
+static int list_hashed_filename_targets PARAMS((WORD_LIST *, int));
+
+/* Print statistics on the current state of hashed commands.  If LIST is
+   not empty, then rehash (or hash in the first place) the specified
+   commands. */
+int
+hash_builtin (list)
+     WORD_LIST *list;
+{
+  int expunge_hash_table, list_targets, list_portably, delete, opt;
+  char *w, *pathname;
+
+  if (hashing_enabled == 0)
+    {
+      builtin_error (_("hashing disabled"));
+      return (EXECUTION_FAILURE);
+    }
+
+  expunge_hash_table = list_targets = list_portably = delete = 0;
+  pathname = (char *)NULL;
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "dlp:rt")) != -1)
+    {
+      switch (opt)
+	{
+	case 'd':
+	  delete = 1;
+	  break;
+	case 'l':
+	  list_portably = 1;
+	  break;
+	case 'p':
+	  pathname = list_optarg;
+	  break;
+	case 'r':
+	  expunge_hash_table = 1;
+	  break;
+	case 't':
+	  list_targets = 1;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+  /* hash -t requires at least one argument. */
+  if (list == 0 && (delete || list_targets))
+    {
+      sh_needarg (delete ? "-d" : "-t");
+      return (EXECUTION_FAILURE);
+    }
+
+  /* We want hash -r to be silent, but hash -- to print hashing info, so
+     we test expunge_hash_table. */
+  if (list == 0 && expunge_hash_table == 0)
+    {
+      opt = print_hashed_commands (list_portably);
+      if (opt == 0 && posixly_correct == 0 &&
+	    (list_portably == 0 || shell_compatibility_level <= 50))
+	printf (_("%s: hash table empty\n"), this_command_name);
+
+      return (EXECUTION_SUCCESS);
+    }
+
+  if (expunge_hash_table)
+    phash_flush ();
+
+  /* If someone runs `hash -r -t xyz' he will be disappointed. */
+  if (list_targets)
+    return (list_hashed_filename_targets (list, list_portably));
+      
+#if defined (RESTRICTED_SHELL)
+  if (restricted && pathname)
+    {
+      if (strchr (pathname, '/'))
+	{
+          sh_restricted (pathname);
+          return (EXECUTION_FAILURE);
+	}
+      /* If we are changing the hash table in a restricted shell, make sure the
+	 target pathname can be found using a $PATH search. */
+      w = find_user_command (pathname);
+      if (w == 0 || *w == 0 || executable_file (w) == 0)
+	{
+	  sh_notfound (pathname);
+	  free (w);
+	  return (EXECUTION_FAILURE);
+	}
+      free (w);
+    }
+#endif
+
+  for (opt = EXECUTION_SUCCESS; list; list = list->next)
+    {
+      /* Add, remove or rehash the specified commands. */
+      w = list->word->word;
+      if (absolute_program (w))
+	continue;
+      else if (pathname)
+	{
+	  if (is_directory (pathname))
+	    {
+#ifdef EISDIR
+	      builtin_error ("%s: %s", pathname, strerror (EISDIR));
+#else
+	      builtin_error (_("%s: is a directory"), pathname);
+#endif
+	      opt = EXECUTION_FAILURE;
+	    }
+	  else
+	    phash_insert (w, pathname, 0, 0);
+	}
+      else if (delete)
+	{
+	  if (phash_remove (w))
+	    {
+	      sh_notfound (w);
+	      opt = EXECUTION_FAILURE;
+	    }
+	}
+      else if (add_hashed_command (w, 0))
+	opt = EXECUTION_FAILURE;
+    }
+
+  fflush (stdout);
+  return (opt);
+}
+
+static int
+add_hashed_command (w, quiet)
+     char *w;
+     int quiet;
+{
+  int rv;
+  char *full_path;
+
+  rv = 0;
+  if (find_function (w) == 0 && find_shell_builtin (w) == 0)
+    {
+      phash_remove (w);
+      full_path = find_user_command (w);
+      if (full_path && executable_file (full_path))
+	phash_insert (w, full_path, dot_found_in_search, 0);
+      else
+	{
+	  if (quiet == 0)
+	    sh_notfound (w);
+	  rv++;
+	}
+      FREE (full_path);
+    }
+  return (rv);
+}
+
+/* Print information about current hashed info. */
+static int
+print_hash_info (item)
+     BUCKET_CONTENTS *item;
+{
+  printf ("%4d\t%s\n", item->times_found, pathdata(item)->path);
+  return 0;
+}
+
+static int
+print_portable_hash_info (item)
+     BUCKET_CONTENTS *item;
+{
+  char *fp, *fn;
+
+  fp = printable_filename (pathdata(item)->path, 1);
+  fn = printable_filename (item->key, 1);
+  printf ("builtin hash -p %s %s\n", fp, fn);
+  if (fp != pathdata(item)->path)
+    free (fp);
+  if (fn != item->key)
+    free (fn);
+  return 0;
+}
+
+static int
+print_hashed_commands (fmt)
+     int fmt;
+{
+  if (hashed_filenames == 0 || HASH_ENTRIES (hashed_filenames) == 0)
+    return (0);
+
+  if (fmt == 0)
+    printf (_("hits\tcommand\n"));
+  hash_walk (hashed_filenames, fmt ? print_portable_hash_info : print_hash_info);
+  return (1);
+}
+
+static int
+list_hashed_filename_targets (list, fmt)
+     WORD_LIST *list;
+     int fmt;
+{
+  int all_found, multiple;
+  char *target;
+  WORD_LIST *l;
+
+  all_found = 1;
+  multiple = list->next != 0;
+
+  for (l = list; l; l = l->next)
+    {
+      target = phash_search (l->word->word);
+      if (target == 0)
+	{
+	  all_found = 0;
+	  sh_notfound (l->word->word);
+	  continue;
+	}
+      if (fmt)
+	printf ("builtin hash -p %s %s\n", target, l->word->word);
+      else
+	{
+	  if (multiple)
+	    printf ("%s\t", l->word->word);
+	  printf ("%s\n", target);
+	}
+      free (target);
+    }
+
+  return (all_found ? EXECUTION_SUCCESS : EXECUTION_FAILURE);
+}
diff --git a/builtins/help.def b/builtins/help.def
new file mode 100644
index 0000000..f33b2b9
--- /dev/null
+++ b/builtins/help.def
@@ -0,0 +1,553 @@
+This file is help.def, from which is created help.c.
+It implements the builtin "help" in Bash.
+
+Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES help.c
+
+$BUILTIN help
+$FUNCTION help_builtin
+$DEPENDS_ON HELP_BUILTIN
+$SHORT_DOC help [-dms] [pattern ...]
+Display information about builtin commands.
+
+Displays brief summaries of builtin commands.  If PATTERN is
+specified, gives detailed help on all commands matching PATTERN,
+otherwise the list of help topics is printed.
+
+Options:
+  -d	output short description for each topic
+  -m	display usage in pseudo-manpage format
+  -s	output only a short usage synopsis for each topic matching
+		PATTERN
+
+Arguments:
+  PATTERN	Pattern specifying a help topic
+
+Exit Status:
+Returns success unless PATTERN is not found or an invalid option is given.
+$END
+
+#include <config.h>
+
+#if defined (HELP_BUILTIN)
+#include <stdio.h>
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include <errno.h>
+
+#include <filecntl.h>
+#include <stddef.h>
+
+#include "../bashintl.h"
+
+#include "../shell.h"
+#include "../builtins.h"
+#include "../execute_cmd.h"
+#include "../pathexp.h"
+#include "common.h"
+#include "bashgetopt.h"
+
+#include <glob/strmatch.h>
+#include <glob/glob.h>
+
+#ifndef errno
+extern int errno;
+#endif
+
+extern const char * const bash_copyright;
+extern const char * const bash_license;
+
+static void show_builtin_command_help PARAMS((void));
+static int open_helpfile PARAMS((char *));
+static void show_desc PARAMS((char *, int));
+static void show_manpage PARAMS((char *, int));
+static void show_longdoc PARAMS((int));
+
+/* Print out a list of the known functions in the shell, and what they do.
+   If LIST is supplied, print out the list which matches for each pattern
+   specified. */
+int
+help_builtin (list)
+     WORD_LIST *list;
+{
+  register int i;
+  char *pattern, *name;
+  int plen, match_found, sflag, dflag, mflag, m, pass, this_found;
+
+  dflag = sflag = mflag = 0;
+  reset_internal_getopt ();
+  while ((i = internal_getopt (list, "dms")) != -1)
+    {
+      switch (i)
+	{
+	case 'd':
+	  dflag = 1;
+	  break;
+	case 'm':
+	  mflag = 1;
+	  break;
+	case 's':
+	  sflag = 1;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+  if (list == 0)
+    {
+      show_shell_version (0);
+      show_builtin_command_help ();
+      return (EXECUTION_SUCCESS);
+    }
+
+  /* We should consider making `help bash' do something. */
+
+  if (glob_pattern_p (list->word->word) == 1)
+    {
+      printf ("%s", ngettext ("Shell commands matching keyword `", "Shell commands matching keywords `", (list->next ? 2 : 1)));
+      print_word_list (list, ", ");
+      printf ("%s", _("'\n\n"));
+    }
+
+  for (match_found = 0, pattern = ""; list; list = list->next)
+    {
+      pattern = list->word->word;
+      plen = strlen (pattern);
+
+      for (pass = 1, this_found = 0; pass < 3; pass++)
+	{
+	  for (i = 0; name = shell_builtins[i].name; i++)
+	    {
+	      QUIT;
+
+	      /* First pass: look for exact string or pattern matches.
+		 Second pass: look for prefix matches like bash-4.2 */
+	      if (pass == 1)
+	        m = (strcmp (pattern, name) == 0) ||
+		    (strmatch (pattern, name, FNMATCH_EXTFLAG) != FNM_NOMATCH);
+	      else
+		m = strncmp (pattern, name, plen) == 0;
+
+	      if (m)
+	        {
+	          this_found = 1;
+	          match_found++;
+	          if (dflag)
+		    {
+		      show_desc (name, i);
+		      continue;
+		    }
+	          else if (mflag)
+		    {
+		      show_manpage (name, i);
+		      continue;
+		    }
+
+	          printf ("%s: %s\n", name, _(shell_builtins[i].short_doc));
+
+	          if (sflag == 0)
+		    show_longdoc (i);
+	        }
+	    }
+	  if (pass == 1 && this_found == 1)
+	    break;
+	}
+    }
+
+  if (match_found == 0)
+    {
+      builtin_error (_("no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."), pattern, pattern, pattern);
+      return (EXECUTION_FAILURE);
+    }
+
+  fflush (stdout);
+  return (EXECUTION_SUCCESS);
+}
+
+void
+builtin_help ()
+{
+  int ind;
+  ptrdiff_t d;
+
+  current_builtin = builtin_address_internal (this_command_name, 0);
+  if (current_builtin == 0)
+    return;
+
+  d = current_builtin - shell_builtins;
+
+#if defined (__STDC__)
+  ind = (int)d;
+#else
+  ind = (int)d / sizeof (struct builtin);
+#endif
+
+  printf ("%s: %s\n", this_command_name, _(shell_builtins[ind].short_doc));
+  show_longdoc (ind);  
+}
+
+static int
+open_helpfile (name)
+     char *name;
+{
+  int fd;
+
+  fd = open (name, O_RDONLY);
+  if (fd == -1)
+    {
+      builtin_error (_("%s: cannot open: %s"), name, strerror (errno));
+      return -1;
+    }
+  return fd;
+}
+
+/* By convention, enforced by mkbuiltins.c, if separate help files are being
+   used, the long_doc array contains one string -- the full pathname of the
+   help file for this builtin.  */
+static void
+show_longdoc (i)
+     int i;
+{
+  register int j;
+  char * const *doc;
+  int fd;
+
+  doc = shell_builtins[i].long_doc;
+
+  if (doc && doc[0] && *doc[0] == '/' && doc[1] == (char *)NULL)
+    {
+      fd = open_helpfile (doc[0]);
+      if (fd < 0)
+	return;
+      zcatfd (fd, 1, doc[0]);
+      close (fd);
+    }
+  else if (doc)
+    for (j = 0; doc[j]; j++)
+      printf ("%*s%s\n", BASE_INDENT, " ", _(doc[j]));
+}
+
+static void
+show_desc (name, i)
+     char *name;
+     int i;
+{
+  register int j, r;
+  char **doc, *line;
+  int fd, usefile;
+
+  doc = (char **)shell_builtins[i].long_doc;
+
+  usefile = (doc && doc[0] && *doc[0] == '/' && doc[1] == (char *)NULL);
+  if (usefile)
+    {
+      fd = open_helpfile (doc[0]);
+      if (fd < 0)
+	return;
+      r = zmapfd (fd, &line, doc[0]);
+      close (fd);
+      /* XXX - handle errors if zmapfd returns < 0 */
+    }
+  else
+    line = doc ? doc[0] : (char *)NULL;
+
+  printf ("%s - ", name);
+  for (j = 0; line && line[j]; j++)
+    {
+      putchar (line[j]);
+      if (line[j] == '\n')
+	break;
+    }
+  
+  fflush (stdout);
+
+  if (usefile)
+    free (line);
+}
+
+/* Print builtin help in pseudo-manpage format. */
+static void
+show_manpage (name, i)
+     char *name;
+     int i;
+{
+  register int j;
+  char **doc, *line;
+  int fd, usefile;
+
+  doc = (char **)shell_builtins[i].long_doc;
+
+  usefile = (doc && doc[0] && *doc[0] == '/' && doc[1] == (char *)NULL);
+  if (usefile)
+    {
+      fd = open_helpfile (doc[0]);
+      if (fd < 0)
+	return;
+      zmapfd (fd, &line, doc[0]);
+      close (fd);
+    }
+  else
+    line = doc ? _(doc[0]) : (char *)NULL;
+
+  /* NAME */
+  printf ("NAME\n");
+  printf ("%*s%s - ", BASE_INDENT, " ", name);
+  for (j = 0; line && line[j]; j++)
+    {
+      putchar (line[j]);
+      if (line[j] == '\n')
+	break;
+    }
+  printf ("\n");
+
+  /* SYNOPSIS */
+  printf ("SYNOPSIS\n");
+  printf ("%*s%s\n\n", BASE_INDENT, " ", _(shell_builtins[i].short_doc));
+
+  /* DESCRIPTION */
+  printf ("DESCRIPTION\n");
+  if (usefile == 0)
+    {
+      for (j = 0; doc[j]; j++)
+        printf ("%*s%s\n", BASE_INDENT, " ", _(doc[j]));
+    }
+  else
+    {
+      for (j = 0; line && line[j]; j++)
+	{
+	  putchar (line[j]);
+	  if (line[j] == '\n')
+	    printf ("%*s", BASE_INDENT, " ");
+	}
+    }
+  putchar ('\n');
+
+  /* SEE ALSO */
+  printf ("SEE ALSO\n");
+  printf ("%*sbash(1)\n\n", BASE_INDENT, " ");
+
+  /* IMPLEMENTATION */
+  printf ("IMPLEMENTATION\n");
+  printf ("%*s", BASE_INDENT, " ");
+  show_shell_version (0);
+  printf ("%*s", BASE_INDENT, " ");
+  printf ("%s\n", _(bash_copyright));
+  printf ("%*s", BASE_INDENT, " ");
+  printf ("%s\n", _(bash_license));
+
+  fflush (stdout);
+  if (usefile)
+    free (line);
+}
+
+static void
+dispcolumn (i, buf, bufsize, width, height)
+     int i;
+     char *buf;
+     size_t bufsize;
+     int width, height;
+{
+  int j;
+  int dispcols;
+  char *helpdoc;
+
+  /* first column */
+  helpdoc = _(shell_builtins[i].short_doc);
+
+  buf[0] = (shell_builtins[i].flags & BUILTIN_ENABLED) ? ' ' : '*';
+  strncpy (buf + 1, helpdoc, width - 2);
+  buf[width - 2] = '>';		/* indicate truncation */
+  buf[width - 1] = '\0';
+  printf ("%s", buf);
+  if (((i << 1) >= num_shell_builtins) || (i+height >= num_shell_builtins))
+    {
+      printf ("\n");
+      return;
+    }
+
+  dispcols = strlen (buf);
+  /* two spaces */
+  for (j = dispcols; j < width; j++)
+    putc (' ', stdout);
+
+  /* second column */
+  helpdoc = _(shell_builtins[i+height].short_doc);
+
+  buf[0] = (shell_builtins[i+height].flags & BUILTIN_ENABLED) ? ' ' : '*';
+  strncpy (buf + 1, helpdoc, width - 3);
+  buf[width - 3] = '>';		/* indicate truncation */
+  buf[width - 2] = '\0';
+
+  printf ("%s\n", buf);
+}
+
+#if defined (HANDLE_MULTIBYTE)
+static void
+wdispcolumn (i, buf, bufsize, width, height)
+     int i;
+     char *buf;
+     size_t bufsize;
+     int width, height;
+{
+  int j;
+  int dispcols, dispchars;
+  char *helpdoc;
+  wchar_t *wcstr;
+  size_t slen, n;
+
+  /* first column */
+  helpdoc = _(shell_builtins[i].short_doc);
+
+  wcstr = 0;
+  slen = mbstowcs ((wchar_t *)0, helpdoc, 0);
+  if (slen == -1)
+    {
+      dispcolumn (i, buf, bufsize, width, height);
+      return;
+    }
+
+  /* No bigger than the passed max width */
+  if (slen >= width)
+    slen = width - 2;
+  wcstr = (wchar_t *)xmalloc (sizeof (wchar_t) * (width + 2));
+  n = mbstowcs (wcstr+1, helpdoc, slen + 1);
+  wcstr[n+1] = L'\0';
+
+  /* Turn tabs and newlines into spaces for column display, since wcwidth
+     returns -1 for them */
+  for (j = 1; j < n; j++)
+    if (wcstr[j] == L'\n' || wcstr[j] == L'\t')
+      wcstr[j] = L' ';
+
+  /* dispchars == number of characters that will be displayed */
+  dispchars = wcsnwidth (wcstr+1, slen, width - 2);
+  /* dispcols == number of columns required to display DISPCHARS */
+  dispcols = wcswidth (wcstr+1, dispchars) + 1;	/* +1 for ' ' or '*' */
+
+  wcstr[0] = (shell_builtins[i].flags & BUILTIN_ENABLED) ? L' ' : L'*';
+
+  if (dispcols >= width-2)
+    {
+      wcstr[dispchars] = L'>';		/* indicate truncation */
+      wcstr[dispchars+1] = L'\0';
+    }
+
+  printf ("%ls", wcstr);
+  if (((i << 1) >= num_shell_builtins) || (i+height >= num_shell_builtins))
+    {
+      printf ("\n");
+      free (wcstr);
+      return;
+    }
+
+  /* at least one space */
+  for (j = dispcols; j < width; j++)
+    putc (' ', stdout);
+
+  /* second column */
+  helpdoc = _(shell_builtins[i+height].short_doc);
+  slen = mbstowcs ((wchar_t *)0, helpdoc, 0);
+  if (slen == -1)
+    {
+      /* for now */
+      printf ("%c%s\n", (shell_builtins[i+height].flags & BUILTIN_ENABLED) ? ' ' : '*', helpdoc);
+      free (wcstr);
+      return;
+    }
+
+  /* Reuse wcstr since it is already width wide chars long */
+  if (slen >= width)
+    slen = width - 2;
+  n = mbstowcs (wcstr+1, helpdoc, slen + 1);
+  wcstr[n+1] = L'\0';		/* make sure null-terminated */
+
+  /* Turn tabs and newlines into spaces for column display */
+  for (j = 1; j < n; j++)
+    if (wcstr[j] == L'\n' || wcstr[j] == L'\t')
+      wcstr[j] = L' ';
+
+  /* dispchars == number of characters that will be displayed */
+  dispchars = wcsnwidth (wcstr+1, slen, width - 2);
+  dispcols = wcswidth (wcstr+1, dispchars) + 1;	/* +1 for ' ' or '*' */
+  
+  wcstr[0] = (shell_builtins[i+height].flags & BUILTIN_ENABLED) ? L' ' : L'*';
+
+  /* The dispchars-1 is there for terminals that behave strangely when you
+     have \n in the nth column for terminal width n; this is what bash-4.3
+     did. */
+  if (dispcols >= width - 2)
+    {
+      wcstr[dispchars-1] = L'>';		/* indicate truncation */
+      wcstr[dispchars] = L'\0';
+    }
+
+  printf ("%ls\n", wcstr);
+
+  free (wcstr);
+}
+#endif /* HANDLE_MULTIBYTE */
+
+static void
+show_builtin_command_help ()
+{
+  int i, j;
+  int height, width;
+  char *t, blurb[128];
+
+  printf (
+_("These shell commands are defined internally.  Type `help' to see this list.\n\
+Type `help name' to find out more about the function `name'.\n\
+Use `info bash' to find out more about the shell in general.\n\
+Use `man -k' or `info' to find out more about commands not in this list.\n\
+\n\
+A star (*) next to a name means that the command is disabled.\n\
+\n"));
+
+  width = default_columns ();
+
+  width /= 2;
+  if (width > sizeof (blurb))
+    width = sizeof (blurb);
+  if (width <= 3)
+    width = 40;
+  height = (num_shell_builtins + 1) / 2;	/* number of rows */
+
+  for (i = 0; i < height; i++)
+    {
+      QUIT;
+
+#if defined (HANDLE_MULTIBYTE)
+      if (MB_CUR_MAX > 1)
+	wdispcolumn (i, blurb, sizeof (blurb), width, height);
+      else
+#endif
+	dispcolumn (i, blurb, sizeof (blurb), width, height);
+    }
+}
+#endif /* HELP_BUILTIN */
diff --git a/builtins/history.def b/builtins/history.def
new file mode 100644
index 0000000..5db44c2
--- /dev/null
+++ b/builtins/history.def
@@ -0,0 +1,466 @@
+This file is history.def, from which is created history.c.
+It implements the builtin "history" in Bash.
+
+Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES history.c
+
+$BUILTIN history
+$FUNCTION history_builtin
+$DEPENDS_ON HISTORY
+$SHORT_DOC history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg [arg...]
+Display or manipulate the history list.
+
+Display the history list with line numbers, prefixing each modified
+entry with a `*'.  An argument of N lists only the last N entries.
+
+Options:
+  -c	clear the history list by deleting all of the entries
+  -d offset	delete the history entry at position OFFSET. Negative
+		offsets count back from the end of the history list
+
+  -a	append history lines from this session to the history file
+  -n	read all history lines not already read from the history file
+		and append them to the history list
+  -r	read the history file and append the contents to the history
+		list
+  -w	write the current history to the history file
+
+  -p	perform history expansion on each ARG and display the result
+		without storing it in the history list
+  -s	append the ARGs to the history list as a single entry
+
+If FILENAME is given, it is used as the history file.  Otherwise,
+if HISTFILE has a value, that is used, else ~/.bash_history.
+
+If the HISTTIMEFORMAT variable is set and not null, its value is used
+as a format string for strftime(3) to print the time stamp associated
+with each displayed history entry.  No time stamps are printed otherwise.
+
+Exit Status:
+Returns success unless an invalid option is given or an error occurs.
+$END
+
+#include <config.h>
+
+#if defined (HISTORY)
+#include "../bashtypes.h"
+#if ! defined(_MINIX) && defined (HAVE_SYS_FILE_H)
+#  include <sys/file.h>
+#endif
+#include "posixstat.h"
+#include "filecntl.h"
+#include <errno.h>
+#include <stdio.h>
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "../bashansi.h"
+#include "../bashintl.h"
+
+#include "../shell.h"
+#include "../flags.h"
+#include "../parser.h"
+#include "../bashhist.h"
+#include <readline/history.h>
+#include "bashgetopt.h"
+#include "common.h"
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+static char *histtime PARAMS((HIST_ENTRY *, const char *));
+static int display_history PARAMS((WORD_LIST *));
+static void push_history PARAMS((WORD_LIST *));
+static int expand_and_print_history PARAMS((WORD_LIST *));
+
+#define AFLAG	0x01
+#define RFLAG	0x02
+#define WFLAG	0x04
+#define NFLAG	0x08
+#define SFLAG	0x10
+#define PFLAG	0x20
+#define CFLAG	0x40
+#define DFLAG	0x80
+
+int
+history_builtin (list)
+     WORD_LIST *list;
+{
+  int flags, opt, result, old_history_lines, obase, ind;
+  char *filename, *delete_arg, *range;
+  intmax_t delete_offset;
+
+  flags = 0;
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "acd:npsrw")) != -1)
+    {
+      switch (opt)
+	{
+	case 'a':
+	  flags |= AFLAG;
+	  break;
+	case 'c':
+	  flags |= CFLAG;
+	  break;
+	case 'n':
+	  flags |= NFLAG;
+	  break;
+	case 'r':
+	  flags |= RFLAG;
+	  break;
+	case 'w':
+	  flags |= WFLAG;
+	  break;
+	case 's':
+	  flags |= SFLAG;
+	  break;
+	case 'd':
+	  flags |= DFLAG;
+	  delete_arg = list_optarg;
+	  break;
+	case 'p':
+#if defined (BANG_HISTORY)
+	  flags |= PFLAG;
+#endif
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+  opt = flags & (AFLAG|RFLAG|WFLAG|NFLAG);
+  if (opt && opt != AFLAG && opt != RFLAG && opt != WFLAG && opt != NFLAG)
+    {
+      builtin_error (_("cannot use more than one of -anrw"));
+      return (EXECUTION_FAILURE);
+    }
+
+  /* clear the history, but allow other arguments to add to it again. */
+  if (flags & CFLAG)
+    {
+      bash_clear_history ();
+      if (list == 0)
+	return (EXECUTION_SUCCESS);
+    }
+
+  if (flags & SFLAG)
+    {
+      if (list)
+	push_history (list);
+      return (EXECUTION_SUCCESS);
+    }
+#if defined (BANG_HISTORY)
+  else if (flags & PFLAG)
+    {
+      if (list)
+	return (expand_and_print_history (list));
+      return (sh_chkwrite (EXECUTION_SUCCESS));
+    }
+#endif
+  else if ((flags & DFLAG) && (range = strchr ((delete_arg[0] == '-') ? delete_arg + 1 : delete_arg, '-')))
+    {
+      intmax_t delete_start, delete_end;
+      *range++ = '\0';
+      if (legal_number (delete_arg, &delete_start) == 0 || legal_number (range, &delete_end) == 0)
+	{
+	  range[-1] = '-';
+	  sh_erange (delete_arg, _("history position"));
+	  return (EXECUTION_FAILURE);
+	}
+      if (delete_arg[0] == '-' && delete_start < 0)
+        {
+	  /* the_history[history_length] == 0x0, so this is correct */
+          delete_start += history_length;
+	  if (delete_start < history_base)
+	    {
+start_error:
+	      sh_erange (delete_arg, _("history position"));
+	      return (EXECUTION_FAILURE);
+	    }
+        }
+      /* numbers as displayed by display_history are offset by history_base */
+      else if (delete_start > 0)
+	delete_start -= history_base;
+      if (delete_start < 0 || delete_start >= history_length)
+	goto start_error;
+      if (range[0] == '-' && delete_end < 0)
+        {
+          delete_end += history_length;
+	  if (delete_end < history_base)
+	    {
+range_error:
+	      sh_erange (range, _("history position"));
+	      return (EXECUTION_FAILURE);
+	    }
+        }
+      else if (delete_end > 0)
+	delete_end -= history_base;
+      if (delete_end < 0 || delete_end >= history_length)
+	goto range_error;
+      result = bash_delete_history_range (delete_start, delete_end);
+      if (where_history () > history_length)
+	history_set_pos (history_length);
+      return (result ? EXECUTION_SUCCESS : EXECUTION_FAILURE);
+    }
+  else if (flags & DFLAG)
+    {
+      if (legal_number (delete_arg, &delete_offset) == 0)
+	{
+	  sh_erange (delete_arg, _("history position"));
+	  return (EXECUTION_FAILURE);
+	}
+      /* check for negative offsets, count back from end of list */
+      if (delete_arg[0] == '-' && delete_offset < 0)
+	{
+	  /* since the_history[history_length] == 0x0, this calculation means
+	     that history -d -1 will delete the last history entry, which at
+	     this point is the history -d -1 we just added. */
+	  ind = history_length + delete_offset;
+	  if (ind < history_base)
+	    {
+	      sh_erange (delete_arg, _("history position"));
+	      return (EXECUTION_FAILURE);
+	    }
+	  opt = ind + history_base;	/* compensate for opt - history_base below */
+	}
+      else if ((delete_offset < history_base) || (delete_offset >= (history_base + history_length)))
+	{
+	  sh_erange (delete_arg, _("history position"));
+	  return (EXECUTION_FAILURE);
+	}
+      else
+	opt = delete_offset;
+
+      /* Positive arguments from numbers as displayed by display_history need
+	 to be offset by history_base */
+      result = bash_delete_histent (opt - history_base);
+      /* Since remove_history changes history_length, this can happen if
+	 we delete the last history entry. */
+      if (where_history () > history_length)
+	history_set_pos (history_length);
+      return (result ? EXECUTION_SUCCESS : EXECUTION_FAILURE);
+    }
+  else if ((flags & (AFLAG|RFLAG|NFLAG|WFLAG|CFLAG)) == 0)
+    {
+      result = display_history (list);
+      return (sh_chkwrite (result));
+    }
+
+  filename = list ? list->word->word : get_string_value ("HISTFILE");
+  result = EXECUTION_SUCCESS;
+
+#if defined (RESTRICTED_SHELL)
+  if (restricted && strchr (filename, '/'))
+    {
+      sh_restricted (filename);
+      return (EXECUTION_FAILURE);
+    }
+#endif
+
+  if (flags & AFLAG)		/* Append session's history to file. */
+    result = maybe_append_history (filename);
+  else if (flags & WFLAG)	/* Write entire history. */
+    result = write_history (filename);
+  else if (flags & RFLAG)	/* Read entire file. */
+    {
+      result = read_history (filename);
+      history_lines_in_file = history_lines_read_from_file;
+      /* history_lines_in_file = where_history () + history_base - 1; */
+    }
+  else if (flags & NFLAG)	/* Read `new' history from file. */
+    {
+      /* Read all of the lines in the file that we haven't already read. */
+      old_history_lines = history_lines_in_file;
+      obase = history_base;
+
+      using_history ();
+      result = read_history_range (filename, history_lines_in_file, -1);
+      using_history ();
+
+      history_lines_in_file = history_lines_read_from_file;
+      /* history_lines_in_file = where_history () + history_base - 1; */
+
+      /* If we're rewriting the history file at shell exit rather than just
+	 appending the lines from this session to it, the question is whether
+	 we reset history_lines_this_session to 0, losing any history entries
+	 we had before we read the new entries from the history file, or
+	 whether we count the new entries we just read from the file as
+	 history lines added during this session.
+	 Right now, we do the latter.  This will cause these history entries
+	 to be written to the history file along with any intermediate entries
+	 we add when we do a `history -a', but the alternative is losing
+	 them altogether. */
+      if (force_append_history == 0)
+	history_lines_this_session += history_lines_in_file - old_history_lines +
+				    history_base - obase;
+    }
+
+  return (result ? EXECUTION_FAILURE : EXECUTION_SUCCESS);
+}
+
+/* Accessors for HIST_ENTRY lists that are called HLIST. */
+#define histline(i) (hlist[(i)]->line)
+#define histdata(i) (hlist[(i)]->data)
+
+static char *
+histtime (hlist, histtimefmt)
+     HIST_ENTRY *hlist;
+     const char *histtimefmt;
+{
+  static char timestr[128];
+  time_t t;
+  struct tm *tm;
+
+  t = history_get_time (hlist);
+  tm = t ? localtime (&t) : 0;
+  if (t && tm)
+    strftime (timestr, sizeof (timestr), histtimefmt, tm);
+  else if (hlist->timestamp && hlist->timestamp[0])
+    snprintf (timestr, sizeof (timestr), _("%s: invalid timestamp"),
+	(hlist->timestamp[0] == '#') ? hlist->timestamp + 1: hlist->timestamp);
+  else
+    strcpy (timestr, "??");
+  return timestr;
+}
+
+static int
+display_history (list)
+     WORD_LIST *list;
+{
+  register int i;
+  intmax_t limit;
+  HIST_ENTRY **hlist;
+  char *histtimefmt, *timestr;
+
+  if (list)
+    {
+      if (get_numeric_arg (list, 0, &limit) == 0)
+	return (EXECUTION_FAILURE);
+
+      if (limit < 0)
+	limit = -limit;
+    }
+  else
+    limit = -1;
+
+  hlist = history_list ();
+
+  if (hlist)
+    {
+      for (i = 0;  hlist[i]; i++)
+	;
+
+      if (0 <= limit && limit < i)
+	i -= limit;
+      else
+	i = 0;
+
+      histtimefmt = get_string_value ("HISTTIMEFORMAT");
+
+      while (hlist[i])
+	{
+	  QUIT;
+
+	  timestr = (histtimefmt && *histtimefmt) ? histtime (hlist[i], histtimefmt) : (char *)NULL;
+	  printf ("%5d%c %s%s\n", i + history_base,
+		  histdata(i) ? '*' : ' ',
+		  ((timestr && *timestr) ? timestr : ""),
+		  histline(i));
+	  i++;
+	}
+    }
+
+  return (EXECUTION_SUCCESS);
+}
+
+/* Remove the last entry in the history list and add each argument in
+   LIST to the history. */
+static void
+push_history (list)
+     WORD_LIST *list;
+{
+  char *s;
+
+  /* Delete the last history entry if it was a single entry added to the
+     history list (generally the `history -s' itself), or if `history -s'
+     is being used in a compound command and the compound command was
+     added to the history as a single element (command-oriented history).
+     If you don't want history -s to remove the compound command from the
+     history, change #if 0 to #if 1 below. */
+#if 0
+  if (remember_on_history && hist_last_line_pushed == 0 &&
+	hist_last_line_added && bash_delete_last_history () == 0)
+#else
+  if (remember_on_history && hist_last_line_pushed == 0 &&
+	(hist_last_line_added ||
+	  (current_command_line_count > 0 && current_command_first_line_saved && command_oriented_history))
+      && bash_delete_last_history () == 0)
+#endif
+      return;
+
+  s = string_list (list);
+  /* Call check_add_history with FORCE set to 1 to skip the check against
+     current_command_line_count.  If history -s is used in a compound
+     command, the above code will delete the compound command's history
+     entry and this call will add the line to the history as a separate
+     entry.  Without FORCE=1, if current_command_line_count were > 1, the
+     line would be appended to the entry before the just-deleted entry. */
+  check_add_history (s, 1);	/* obeys HISTCONTROL, HISTIGNORE */
+
+  hist_last_line_pushed = 1;	/* XXX */
+  free (s);
+}
+
+#if defined (BANG_HISTORY)
+static int
+expand_and_print_history (list)
+     WORD_LIST *list;
+{
+  char *s;
+  int r, result;
+
+  if (hist_last_line_pushed == 0 && hist_last_line_added && bash_delete_last_history () == 0)
+    return EXECUTION_FAILURE;
+  result = EXECUTION_SUCCESS;
+  while (list)
+    {
+      r = history_expand (list->word->word, &s);
+      if (r < 0)
+	{
+	  builtin_error (_("%s: history expansion failed"), list->word->word);
+	  result = EXECUTION_FAILURE;
+	}
+      else
+	{
+	  fputs (s, stdout);
+	  putchar ('\n');
+	}
+      FREE (s);
+      list = list->next;
+    }
+  fflush (stdout);
+  return result;
+}
+#endif /* BANG_HISTORY */
+#endif /* HISTORY */
diff --git a/builtins/inlib.def b/builtins/inlib.def
new file mode 100644
index 0000000..c4faf0d
--- /dev/null
+++ b/builtins/inlib.def
@@ -0,0 +1,80 @@
+This file is inlib.def, from which is created inlib.c.
+It implements the Apollo-specific builtin "inlib" in Bash.
+
+Copyright (C) 1987-2002 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES inlib.c
+#include <config.h>
+
+#include <stdio.h>
+#include "../shell.h"
+
+$BUILTIN inlib
+$FUNCTION inlib_builtin
+$DEPENDS_ON apollo
+$SHORT_DOC inlib pathname [pathname...]
+Install user-supplied library.
+
+Install a user-supplied library specified by pathname in the current
+shell process. The library is used to resolve external references
+in programs and libraries loaded after its installation.  Note
+that the library is not loaded into the address space unless it is
+needed to resolve an external reference.  The list of inlibed
+libraries is passed to all children of the current shell.
+
+Exit Status:
+Returns success unless PATHNAME is not found or an error occurs.
+$END
+
+#if defined (apollo)
+
+#include <apollo/base.h>
+#include <apollo/loader.h>
+
+inlib_builtin (list)
+     WORD_LIST *list;
+{
+  status_$t status;
+  int return_value;
+  short len;
+
+  if (!list)
+    {
+      builtin_usage ();
+      return (EX_USAGE);
+    }
+
+  return_value = EXECUTION_SUCCESS;
+
+  while (list)
+    {
+      len = (short)strlen (list->word->word);
+      loader_$inlib (list->word->word, len, &status);
+
+      if (status.all != status_$ok)
+	{
+	  builtin_error (_("%s: inlib failed"), list->word->word);
+	  return_value = EXECUTION_FAILURE;
+	}
+
+      list = list->next;
+    }
+
+  return (return_value);
+}
+#endif /* apollo */
diff --git a/builtins/jobs.def b/builtins/jobs.def
new file mode 100644
index 0000000..1ce098d
--- /dev/null
+++ b/builtins/jobs.def
@@ -0,0 +1,300 @@
+This file is jobs.def, from which is created jobs.c.
+It implements the builtins "jobs" and "disown" in Bash.
+
+Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES jobs.c
+
+$BUILTIN jobs
+$FUNCTION jobs_builtin
+$DEPENDS_ON JOB_CONTROL
+$SHORT_DOC jobs [-lnprs] [jobspec ...] or jobs -x command [args]
+Display status of jobs.
+
+Lists the active jobs.  JOBSPEC restricts output to that job.
+Without options, the status of all active jobs is displayed.
+
+Options:
+  -l	lists process IDs in addition to the normal information
+  -n	lists only processes that have changed status since the last
+		notification
+  -p	lists process IDs only
+  -r	restrict output to running jobs
+  -s	restrict output to stopped jobs
+
+If -x is supplied, COMMAND is run after all job specifications that
+appear in ARGS have been replaced with the process ID of that job's
+process group leader.
+
+Exit Status:
+Returns success unless an invalid option is given or an error occurs.
+If -x is used, returns the exit status of COMMAND.
+$END
+
+#include <config.h>
+
+#if defined (JOB_CONTROL)
+#include "../bashtypes.h"
+#include <signal.h>
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "../bashansi.h"
+#include "../bashintl.h"
+
+#include "../shell.h"
+#include "../jobs.h"
+#include "../execute_cmd.h"
+#include "bashgetopt.h"
+#include "common.h"
+
+#define JSTATE_ANY	0x0
+#define JSTATE_RUNNING	0x1
+#define JSTATE_STOPPED	0x2
+
+static int execute_list_with_replacements PARAMS((WORD_LIST *));
+
+/* The `jobs' command.  Prints outs a list of active jobs.  If the
+   argument `-l' is given, then the process id's are printed also.
+   If the argument `-p' is given, print the process group leader's
+   pid only.  If `-n' is given, only processes that have changed
+   status since the last notification are printed.  If -x is given,
+   replace all job specs with the pid of the appropriate process
+   group leader and execute the command.  The -r and -s options mean
+   to print info about running and stopped jobs only, respectively. */
+int
+jobs_builtin (list)
+     WORD_LIST *list;
+{
+  int form, execute, state, opt, any_failed, job;
+  sigset_t set, oset;
+
+  execute = any_failed = 0;
+  form = JLIST_STANDARD;
+  state = JSTATE_ANY;
+
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "lpnxrs")) != -1)
+    {
+      switch (opt)
+	{
+	case 'l':
+	  form = JLIST_LONG;
+	  break;
+	case 'p':
+	  form = JLIST_PID_ONLY;
+	  break;
+	case 'n':
+	  form = JLIST_CHANGED_ONLY;
+	  break;
+	case 'x':
+	  if (form != JLIST_STANDARD)
+	    {
+	      builtin_error (_("no other options allowed with `-x'"));
+	      return (EXECUTION_FAILURE);
+	    }
+	  execute++;
+	  break;
+	case 'r':
+	  state = JSTATE_RUNNING;
+	  break;
+	case 's':
+	  state = JSTATE_STOPPED;
+	  break;
+
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+
+  list = loptend;
+
+  if (execute)
+    return (execute_list_with_replacements (list));
+
+  if (!list)
+    {
+      switch (state)
+	{
+	case JSTATE_ANY:
+	  list_all_jobs (form);
+	  break;
+	case JSTATE_RUNNING:
+	  list_running_jobs (form);
+	  break;
+	case JSTATE_STOPPED:
+	  list_stopped_jobs (form);
+	  break;
+	}
+      return (EXECUTION_SUCCESS);
+    }
+
+  while (list)
+    {
+      BLOCK_CHILD (set, oset);
+      job = get_job_spec (list);
+
+      if ((job == NO_JOB) || jobs == 0 || get_job_by_jid (job) == 0)
+	{
+	  sh_badjob (list->word->word);
+	  any_failed++;
+	}
+      else if (job != DUP_JOB)
+	list_one_job ((JOB *)NULL, form, 0, job);
+
+      UNBLOCK_CHILD (oset);
+      list = list->next;
+    }
+  return (any_failed ? EXECUTION_FAILURE : EXECUTION_SUCCESS);
+}
+
+static int
+execute_list_with_replacements (list)
+     WORD_LIST *list;
+{
+  register WORD_LIST *l;
+  int job, result;
+  COMMAND *command;
+  JOB *j;
+
+  /* First do the replacement of job specifications with pids. */
+  for (l = list; l; l = l->next)
+    {
+      if (l->word->word[0] == '%')	/* we have a winner */
+	{
+	  job = get_job_spec (l);
+
+	  /* A bad job spec is not really a job spec! Pass it through. */
+	  if (INVALID_JOB (job))
+	    continue;
+
+	  j = get_job_by_jid (job);
+	  free (l->word->word);
+	  l->word->word = itos (j->pgrp);
+	}
+    }
+
+  /* Next make a new simple command and execute it. */
+  begin_unwind_frame ("jobs_builtin");
+
+  command = make_bare_simple_command ();
+  command->value.Simple->words = copy_word_list (list);
+  command->value.Simple->redirects = (REDIRECT *)NULL;
+  command->flags |= CMD_INHIBIT_EXPANSION;
+  command->value.Simple->flags |= CMD_INHIBIT_EXPANSION;
+
+  add_unwind_protect (dispose_command, command);
+  result = execute_command (command);
+  dispose_command (command);
+
+  discard_unwind_frame ("jobs_builtin");
+  return (result);
+}
+#endif /* JOB_CONTROL */
+
+$BUILTIN disown
+$FUNCTION disown_builtin
+$DEPENDS_ON JOB_CONTROL
+$SHORT_DOC disown [-h] [-ar] [jobspec ... | pid ...]
+Remove jobs from current shell.
+
+Removes each JOBSPEC argument from the table of active jobs.  Without
+any JOBSPECs, the shell uses its notion of the current job.
+
+Options:
+  -a	remove all jobs if JOBSPEC is not supplied
+  -h	mark each JOBSPEC so that SIGHUP is not sent to the job if the
+		shell receives a SIGHUP
+  -r	remove only running jobs
+
+Exit Status:
+Returns success unless an invalid option or JOBSPEC is given.
+$END
+
+#if defined (JOB_CONTROL)
+int
+disown_builtin (list)
+     WORD_LIST *list;
+{
+  int opt, job, retval, nohup_only, running_jobs, all_jobs;
+  sigset_t set, oset;
+  intmax_t pid_value;
+
+  nohup_only = running_jobs = all_jobs = 0;
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "ahr")) != -1)
+    {
+      switch (opt)
+	{
+	case 'a':
+	  all_jobs = 1;
+	  break;
+	case 'h':
+	  nohup_only = 1;
+	  break;
+	case 'r':
+	  running_jobs = 1;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+  retval = EXECUTION_SUCCESS;
+
+  /* `disown -a' or `disown -r' */
+  if (list == 0 && (all_jobs || running_jobs))
+    {
+      if (nohup_only)
+	nohup_all_jobs (running_jobs);
+      else
+	delete_all_jobs (running_jobs);
+      return (EXECUTION_SUCCESS);
+    }
+
+  do
+    {
+      BLOCK_CHILD (set, oset);
+      job = (list && legal_number (list->word->word, &pid_value) && pid_value == (pid_t) pid_value)
+		? get_job_by_pid ((pid_t) pid_value, 0, 0)
+		: get_job_spec (list);
+
+      if (job == NO_JOB || jobs == 0 || INVALID_JOB (job))
+	{
+	  sh_badjob (list ? list->word->word : _("current"));
+	  retval = EXECUTION_FAILURE;
+	}
+      else if (nohup_only)
+	nohup_job (job);
+      else
+	delete_job (job, 1);
+      UNBLOCK_CHILD (oset);
+
+      if (list)
+	list = list->next;
+    }
+  while (list);
+
+  return (retval);
+}
+#endif /* JOB_CONTROL */
diff --git a/builtins/kill.def b/builtins/kill.def
new file mode 100644
index 0000000..c655092
--- /dev/null
+++ b/builtins/kill.def
@@ -0,0 +1,276 @@
+This file is kill.def, from which is created kill.c.
+It implements the builtin "kill" in Bash.
+
+Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES kill.c
+
+$BUILTIN kill
+$FUNCTION kill_builtin
+$SHORT_DOC kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l [sigspec]
+Send a signal to a job.
+
+Send the processes identified by PID or JOBSPEC the signal named by
+SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then
+SIGTERM is assumed.
+
+Options:
+  -s sig	SIG is a signal name
+  -n sig	SIG is a signal number
+  -l	list the signal names; if arguments follow `-l' they are
+		assumed to be signal numbers for which names should be listed
+  -L	synonym for -l
+
+Kill is a shell builtin for two reasons: it allows job IDs to be used
+instead of process IDs, and allows processes to be killed if the limit
+on processes that you can create is reached.
+
+Exit Status:
+Returns success unless an invalid option is given or an error occurs.
+$END
+
+#include <config.h>
+
+#include <stdio.h>
+#include <errno.h>
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include "../bashansi.h"
+#include "../bashintl.h"
+
+#include <signal.h>
+
+#include "../shell.h"
+#include "../trap.h"
+#include "../jobs.h"
+#include "common.h"
+
+/* Not all systems declare ERRNO in errno.h... and some systems #define it! */
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+static void kill_error PARAMS((pid_t, int));
+
+#if !defined (CONTINUE_AFTER_KILL_ERROR)
+#  define CONTINUE_OR_FAIL return (EXECUTION_FAILURE)
+#else
+#  define CONTINUE_OR_FAIL goto continue_killing
+#endif /* CONTINUE_AFTER_KILL_ERROR */
+
+/* Here is the kill builtin.  We only have it so that people can type
+   kill -KILL %1?  No, if you fill up the process table this way you
+   can still kill some. */
+int
+kill_builtin (list)
+     WORD_LIST *list;
+{
+  int sig, any_succeeded, listing, saw_signal, dflags;
+  char *sigspec, *word;
+  pid_t pid;
+  intmax_t pid_value;
+
+  if (list == 0)
+    {
+      builtin_usage ();
+      return (EX_USAGE);
+    }
+  CHECK_HELPOPT (list);
+
+  any_succeeded = listing = saw_signal = 0;
+  sig = SIGTERM;
+  sigspec = "TERM";
+
+  dflags = DSIG_NOCASE | ((posixly_correct == 0) ? DSIG_SIGPREFIX : 0);
+  /* Process options. */
+  while (list)
+    {
+      word = list->word->word;
+
+      if (ISOPTION (word, 'l') || ISOPTION (word, 'L'))
+	{
+	  listing++;
+	  list = list->next;
+	}
+      else if (ISOPTION (word, 's') || ISOPTION (word, 'n'))
+	{
+	  list = list->next;
+	  if (list)
+	    {
+	      sigspec = list->word->word;
+use_sigspec:
+	      if (sigspec[0] == '0' && sigspec[1] == '\0')
+		sig = 0;
+	      else
+		sig = decode_signal (sigspec, dflags);
+	      list = list->next;
+	      saw_signal++;
+	    }
+	  else
+	    {
+	      sh_needarg (word);
+	      return (EXECUTION_FAILURE);
+	    }
+	}
+      else if (word[0] == '-' && word[1] == 's' && ISALPHA (word[2]))
+	{
+	  sigspec = word + 2;
+	  goto use_sigspec;
+	}
+      else if (word[0] == '-' && word[1] == 'n' && ISDIGIT (word[2]))
+	{
+	  sigspec = word + 2;
+	  goto use_sigspec;
+	}
+      else if (ISOPTION (word, '-'))
+	{
+	  list = list->next;
+	  break;
+	}
+      else if (ISOPTION (word, '?'))
+	{
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+      /* If this is a signal specification then process it.  We only process
+	 the first one seen; other arguments may signify process groups (e.g,
+	 -num == process group num). */
+      else if (*word == '-' && saw_signal == 0)
+	{
+	  sigspec = word + 1;
+	  sig = decode_signal (sigspec, dflags);
+	  saw_signal++;
+	  list = list->next;
+	}
+      else
+	break;
+    }
+
+  if (listing)
+    return (display_signal_list (list, 0));
+
+  /* OK, we are killing processes. */
+  if (sig == NO_SIG)
+    {
+      sh_invalidsig (sigspec);
+      return (EXECUTION_FAILURE);
+    }
+
+  if (list == 0)
+    {
+      builtin_usage ();
+      return (EX_USAGE);
+    }
+
+  while (list)
+    {
+      word = list->word->word;
+
+      if (*word == '-')
+	word++;
+
+      /* Use the entire argument in case of minus sign presence. */
+      if (*word && legal_number (list->word->word, &pid_value) && (pid_value == (pid_t)pid_value))
+	{
+	  pid = (pid_t) pid_value;
+
+	  if (kill_pid (pid, sig, pid < -1) < 0)
+	    {
+	      if (errno == EINVAL)
+		sh_invalidsig (sigspec);
+	      else
+		kill_error (pid, errno);
+	      CONTINUE_OR_FAIL;
+	    }
+	  else
+	    any_succeeded++;
+	}
+#if defined (JOB_CONTROL)
+      else if (*list->word->word && *list->word->word != '%')
+	{
+	  builtin_error (_("%s: arguments must be process or job IDs"), list->word->word);
+	  CONTINUE_OR_FAIL;
+	}
+      else if (*word)
+	/* Posix.2 says you can kill without job control active (4.32.4) */
+	{			/* Must be a job spec.  Check it out. */
+	  int job;
+	  sigset_t set, oset;
+	  JOB *j;
+
+	  BLOCK_CHILD (set, oset);
+	  job = get_job_spec (list);
+
+	  if (INVALID_JOB (job))
+	    {
+	      if (job != DUP_JOB)
+		sh_badjob (list->word->word);
+	      UNBLOCK_CHILD (oset);
+	      CONTINUE_OR_FAIL;
+	    }
+
+	  j = get_job_by_jid (job);
+	  /* Job spec used.  Kill the process group. If the job was started
+	     without job control, then its pgrp == shell_pgrp, so we have
+	     to be careful.  We take the pid of the first job in the pipeline
+	     in that case. */
+	  pid = IS_JOBCONTROL (job) ? j->pgrp : j->pipe->pid;
+
+	  UNBLOCK_CHILD (oset);
+
+	  if (kill_pid (pid, sig, 1) < 0)
+	    {
+	      if (errno == EINVAL)
+		sh_invalidsig (sigspec);
+	      else
+		kill_error (pid, errno);
+	      CONTINUE_OR_FAIL;
+	    }
+	  else
+	    any_succeeded++;
+	}
+#endif /* !JOB_CONTROL */
+      else
+	{
+	  sh_badpid (list->word->word);
+	  CONTINUE_OR_FAIL;
+	}
+    continue_killing:
+      list = list->next;
+    }
+
+  return (any_succeeded ? EXECUTION_SUCCESS : EXECUTION_FAILURE);
+}
+
+static void
+kill_error (pid, e)
+     pid_t pid;
+     int e;
+{
+  char *x;
+
+  x = strerror (e);
+  if (x == 0)
+    x = _("Unknown error");
+  builtin_error ("(%ld) - %s", (long)pid, x);
+}
diff --git a/builtins/let.def b/builtins/let.def
new file mode 100644
index 0000000..d090a45
--- /dev/null
+++ b/builtins/let.def
@@ -0,0 +1,131 @@
+This file is let.def, from which is created let.c.
+It implements the builtin "let" in Bash.
+
+Copyright (C) 1987-2009 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$BUILTIN let
+$FUNCTION let_builtin
+$PRODUCES let.c
+$SHORT_DOC let arg [arg ...]
+Evaluate arithmetic expressions.
+
+Evaluate each ARG as an arithmetic expression.  Evaluation is done in
+fixed-width integers with no check for overflow, though division by 0
+is trapped and flagged as an error.  The following list of operators is
+grouped into levels of equal-precedence operators.  The levels are listed
+in order of decreasing precedence.
+
+	id++, id--	variable post-increment, post-decrement
+	++id, --id	variable pre-increment, pre-decrement
+	-, +		unary minus, plus
+	!, ~		logical and bitwise negation
+	**		exponentiation
+	*, /, %		multiplication, division, remainder
+	+, -		addition, subtraction
+	<<, >>		left and right bitwise shifts
+	<=, >=, <, >	comparison
+	==, !=		equality, inequality
+	&		bitwise AND
+	^		bitwise XOR
+	|		bitwise OR
+	&&		logical AND
+	||		logical OR
+	expr ? expr : expr
+			conditional operator
+	=, *=, /=, %=,
+	+=, -=, <<=, >>=,
+	&=, ^=, |=	assignment
+
+Shell variables are allowed as operands.  The name of the variable
+is replaced by its value (coerced to a fixed-width integer) within
+an expression.  The variable need not have its integer attribute
+turned on to be used in an expression.
+
+Operators are evaluated in order of precedence.  Sub-expressions in
+parentheses are evaluated first and may override the precedence
+rules above.
+
+Exit Status:
+If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise.
+$END
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include "../bashintl.h"
+
+#include "../shell.h"
+#include "common.h"
+
+/* Arithmetic LET function. */
+int
+let_builtin (list)
+     WORD_LIST *list;
+{
+  intmax_t ret;
+  int expok;
+
+  CHECK_HELPOPT (list);
+
+  /* Skip over leading `--' argument. */
+  if (list && list->word && ISOPTION (list->word->word, '-'))
+    list = list->next;
+
+  if (list == 0)
+    {
+      builtin_error (_("expression expected"));
+      return (EXECUTION_FAILURE);
+    }
+
+  for (; list; list = list->next)
+    {
+      ret = evalexp (list->word->word, EXP_EXPANDED, &expok);
+      if (expok == 0)
+	return (EXECUTION_FAILURE);
+    }
+
+  return ((ret == 0) ? EXECUTION_FAILURE : EXECUTION_SUCCESS);
+}
+
+#ifdef INCLUDE_UNUSED
+int
+exp_builtin (list)
+     WORD_LIST *list;
+{
+  char *exp;
+  intmax_t ret;
+  int expok;
+
+  if (list == 0)
+    {
+      builtin_error (_("expression expected"));
+      return (EXECUTION_FAILURE);
+    }
+
+  exp = string_list (list);
+  ret = evalexp (exp, EXP_EXPANDED, &expok);
+  (void)free (exp);
+  return (((ret == 0) || (expok == 0)) ? EXECUTION_FAILURE : EXECUTION_SUCCESS);
+}
+#endif
diff --git a/builtins/mapfile.def b/builtins/mapfile.def
new file mode 100644
index 0000000..65c3cb4
--- /dev/null
+++ b/builtins/mapfile.def
@@ -0,0 +1,374 @@
+This file is mapfile.def, from which is created mapfile.c.
+It implements the builtin "mapfile" in Bash.
+
+Copyright (C) 2005-2006 Rocky Bernstein for Free Software Foundation, Inc.
+Copyright (C) 2008-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES mapfile.c
+
+$BUILTIN mapfile
+$FUNCTION mapfile_builtin
+$SHORT_DOC mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C callback] [-c quantum] [array]
+Read lines from the standard input into an indexed array variable.
+
+Read lines from the standard input into the indexed array variable ARRAY, or
+from file descriptor FD if the -u option is supplied.  The variable MAPFILE
+is the default ARRAY.
+
+Options:
+  -d delim	Use DELIM to terminate lines, instead of newline
+  -n count	Copy at most COUNT lines.  If COUNT is 0, all lines are copied
+  -O origin	Begin assigning to ARRAY at index ORIGIN.  The default index is 0
+  -s count	Discard the first COUNT lines read
+  -t	Remove a trailing DELIM from each line read (default newline)
+  -u fd	Read lines from file descriptor FD instead of the standard input
+  -C callback	Evaluate CALLBACK each time QUANTUM lines are read
+  -c quantum	Specify the number of lines read between each call to
+			CALLBACK
+
+Arguments:
+  ARRAY	Array variable name to use for file data
+
+If -C is supplied without -c, the default quantum is 5000.  When
+CALLBACK is evaluated, it is supplied the index of the next array
+element to be assigned and the line to be assigned to that element
+as additional arguments.
+
+If not supplied with an explicit origin, mapfile will clear ARRAY before
+assigning to it.
+
+Exit Status:
+Returns success unless an invalid option is given or ARRAY is readonly or
+not an indexed array.
+$END
+
+$BUILTIN readarray
+$FUNCTION mapfile_builtin
+$SHORT_DOC readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C callback] [-c quantum] [array]
+Read lines from a file into an array variable.
+
+A synonym for `mapfile'.
+$END
+
+#include <config.h>
+
+#include "builtins.h"
+#include "posixstat.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "bashansi.h"
+#include "bashintl.h"
+
+#include <stdio.h>
+#include <errno.h>
+
+#include "../bashintl.h"
+#include "../shell.h"
+#include "common.h"
+#include "bashgetopt.h"
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+#if defined (ARRAY_VARS)
+
+static int run_callback PARAMS((const char *, unsigned int, const char *));
+
+#define DEFAULT_ARRAY_NAME	"MAPFILE"
+#define DEFAULT_VARIABLE_NAME	"MAPLINE"	/* not used right now */
+
+/* The value specifying how frequently `mapfile'  calls the callback. */
+#define DEFAULT_QUANTUM 5000
+
+/* Values for FLAGS */
+#define MAPF_CLEARARRAY	0x01
+#define MAPF_CHOP	0x02
+
+static int delim;
+
+static int
+run_callback (callback, curindex, curline)
+     const char *callback;
+     unsigned int curindex;
+     const char *curline;
+{
+  unsigned int execlen;
+  char  *execstr, *qline;
+  int flags;
+
+  qline = sh_single_quote (curline);
+  execlen = strlen (callback) + strlen (qline) + 10;
+  /* 1 for each space between %s and %d,
+     another 1 for the last nul char for C string. */
+  execlen += 3;
+  execstr = xmalloc (execlen);
+
+  flags = SEVAL_NOHIST;
+#if 0
+  if (interactive)
+    flags |= SEVAL_INTERACT;
+#endif
+  snprintf (execstr, execlen, "%s %d %s", callback, curindex, qline);
+  free (qline);
+  return evalstring (execstr, NULL, flags);
+}
+
+static void
+do_chop(line, delim)
+     char *line;
+     unsigned char delim;
+{
+  int length;
+
+  length = strlen (line);
+  if (length && line[length-1] == delim) 
+    line[length-1] = '\0';
+}
+
+static int
+mapfile (fd, line_count_goal, origin, nskip, callback_quantum, callback, array_name, delim, flags)
+     int fd;
+     long line_count_goal, origin, nskip, callback_quantum;
+     char *callback, *array_name;
+     int delim;
+     int flags;
+{
+  char *line;
+  size_t line_length;
+  unsigned int array_index, line_count;
+  SHELL_VAR *entry;
+  int unbuffered_read;
+  
+  line = NULL;
+  line_length = 0;
+  unbuffered_read = 0;
+
+  /* The following check should be done before reading any lines.  Doing it
+     here allows us to call bind_array_element instead of bind_array_variable
+     and skip the variable lookup on every call. */
+  entry = find_or_make_array_variable (array_name, 1);
+  if (entry == 0 || readonly_p (entry) || noassign_p (entry))
+    {
+      if (entry && readonly_p (entry))
+	err_readonly (array_name);
+	
+      return (EXECUTION_FAILURE);
+    }
+  else if (array_p (entry) == 0)
+    {
+      builtin_error (_("%s: not an indexed array"), array_name);
+      return (EXECUTION_FAILURE);
+    }
+  else if (invisible_p (entry))
+    VUNSETATTR (entry, att_invisible);	/* no longer invisible */
+      
+  if (flags & MAPF_CLEARARRAY)
+    array_flush (array_cell (entry));
+
+#ifndef __CYGWIN__
+  unbuffered_read = (lseek (fd, 0L, SEEK_CUR) < 0) && (errno == ESPIPE);
+#else
+  unbuffered_read = 1;
+#endif
+
+  if (delim != '\n')
+    unbuffered_read = 1;
+
+  zreset ();
+
+  /* Skip any lines at beginning of file? */
+  for (line_count = 0; line_count < nskip; line_count++)
+    if (zgetline (fd, &line, &line_length, delim, unbuffered_read) < 0)
+      break;
+
+  line = 0;
+  line_length = 0;    
+
+  /* Reset the buffer for bash own stream */
+  for (array_index = origin, line_count = 1; 
+ 	zgetline (fd, &line, &line_length, delim, unbuffered_read) != -1;
+	array_index++) 
+    {
+      /* Remove trailing newlines? */
+      if (flags & MAPF_CHOP)
+	do_chop (line, delim);
+	  
+      /* Has a callback been registered and if so is it time to call it? */
+      if (callback && line_count && (line_count % callback_quantum) == 0) 
+	{
+	  run_callback (callback, array_index, line);
+
+	  /* Reset the buffer for bash own stream. */
+	  if (unbuffered_read == 0)
+	    zsyncfd (fd);
+	}
+
+      /* XXX - bad things can happen if the callback modifies ENTRY, e.g.,
+	 unsetting it or changing it to a non-indexed-array type. */
+      bind_array_element (entry, array_index, line, 0);
+
+      /* Have we exceeded # of lines to store? */
+      line_count++;
+      if (line_count_goal != 0 && line_count > line_count_goal) 
+	break;
+    }
+
+  free (line);
+
+  if (unbuffered_read == 0)
+    zsyncfd (fd);
+
+  return EXECUTION_SUCCESS;
+}
+
+int
+mapfile_builtin (list)
+     WORD_LIST *list;
+{
+  int opt, code, fd, flags;
+  intmax_t intval;
+  long lines, origin, nskip, callback_quantum;
+  char *array_name, *callback;
+
+  fd = 0;
+  lines = origin = nskip = 0;
+  flags = MAPF_CLEARARRAY;
+  callback_quantum = DEFAULT_QUANTUM;
+  callback = 0;
+  delim = '\n';
+
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "d:u:n:O:tC:c:s:")) != -1)
+    {
+      switch (opt)
+	{
+	case 'd':
+	  delim = *list_optarg;
+	  break;
+	case 'u':
+	  code = legal_number (list_optarg, &intval);
+	  if (code == 0 || intval < 0 || intval != (int)intval)
+	    {
+	      builtin_error (_("%s: invalid file descriptor specification"), list_optarg);
+	      return (EXECUTION_FAILURE);
+	    }
+	  else
+	    fd = intval;
+
+	  if (sh_validfd (fd) == 0)
+	    {
+	      builtin_error (_("%d: invalid file descriptor: %s"), fd, strerror (errno));
+	      return (EXECUTION_FAILURE);
+	    }
+	  break;	  
+
+	case 'n':
+	  code = legal_number (list_optarg, &intval);
+	  if (code == 0 || intval < 0 || intval != (unsigned)intval)
+	    {
+	      builtin_error (_("%s: invalid line count"), list_optarg);
+	      return (EXECUTION_FAILURE);
+	    }
+	  else
+	    lines = intval;
+	  break;
+
+	case 'O':
+	  code = legal_number (list_optarg, &intval);
+	  if (code == 0 || intval < 0 || intval != (unsigned)intval)
+	    {
+	      builtin_error (_("%s: invalid array origin"), list_optarg);
+	      return (EXECUTION_FAILURE);
+	    }
+	  else
+	    origin = intval;
+	  flags &= ~MAPF_CLEARARRAY;
+	  break;
+	case 't':
+	  flags |= MAPF_CHOP;
+	  break;
+	case 'C':
+	  callback = list_optarg;
+	  break;
+	case 'c':
+	  code = legal_number (list_optarg, &intval);
+	  if (code == 0 || intval <= 0 || intval != (unsigned)intval)
+	    {
+	      builtin_error (_("%s: invalid callback quantum"), list_optarg);
+	      return (EXECUTION_FAILURE);
+	    }
+	  else
+	    callback_quantum = intval;
+	  break;
+	case 's':
+	  code = legal_number (list_optarg, &intval);
+	  if (code == 0 || intval < 0 || intval != (unsigned)intval)
+	    {
+	      builtin_error (_("%s: invalid line count"), list_optarg);
+	      return (EXECUTION_FAILURE);
+	    }
+	  else
+	    nskip = intval;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+  if (list == 0) 
+    array_name = DEFAULT_ARRAY_NAME;
+  else if (list->word == 0 || list->word->word == 0)
+    {
+      builtin_error ("internal error: getting variable name");
+      return (EXECUTION_FAILURE);
+    }
+  else if (list->word->word[0] == '\0')
+    {
+      builtin_error (_("empty array variable name"));
+      return (EX_USAGE);
+    } 
+  else
+    array_name = list->word->word;
+  
+  if (legal_identifier (array_name) == 0)
+    {
+      sh_invalidid (array_name);
+      return (EXECUTION_FAILURE);
+    }
+
+  return mapfile (fd, lines, origin, nskip, callback_quantum, callback, array_name, delim, flags);
+}
+
+#else
+
+int
+mapfile_builtin (list)
+     WORD_LIST *list;
+{
+  builtin_error (_("array variable support required"));
+  return (EXECUTION_FAILURE);
+}
+
+#endif  /* ARRAY_VARS */
diff --git a/builtins/mkbuiltins.c b/builtins/mkbuiltins.c
new file mode 100644
index 0000000..e243021
--- /dev/null
+++ b/builtins/mkbuiltins.c
@@ -0,0 +1,1659 @@
+/* mkbuiltins.c - Create builtins.c, builtext.h, and builtdoc.c from
+   a single source file called builtins.def. */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (CROSS_COMPILING) 
+#  include <config.h>
+#else	/* CROSS_COMPILING */
+/* A conservative set of defines based on POSIX/SUS3/XPG6 */
+#  define HAVE_UNISTD_H
+#  define HAVE_STRING_H
+#  define HAVE_STDLIB_H
+
+#  define HAVE_RENAME
+#endif /* CROSS_COMPILING */
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#ifndef _MINIX
+#  include "../bashtypes.h"
+#  if defined (HAVE_SYS_FILE_H)
+#    include <sys/file.h>
+#  endif
+#endif
+
+#include "posixstat.h"
+#include "filecntl.h"
+
+#include "../bashansi.h"
+#include <stdio.h>
+#include <errno.h>
+
+#include "stdc.h"
+
+#define DOCFILE "builtins.texi"
+
+#ifndef errno
+extern int errno;
+#endif
+
+static char *xmalloc (), *xrealloc ();
+
+#if !defined (__STDC__) && !defined (strcpy)
+extern char *strcpy ();
+#endif /* !__STDC__ && !strcpy */
+
+#define savestring(x) strcpy (xmalloc (1 + strlen (x)), (x))
+#define whitespace(c) (((c) == ' ') || ((c) == '\t'))
+
+/* Flag values that builtins can have. */
+#define BUILTIN_FLAG_SPECIAL	0x01
+#define BUILTIN_FLAG_ASSIGNMENT 0x02
+#define BUILTIN_FLAG_LOCALVAR	0x04
+#define BUILTIN_FLAG_POSIX_BUILTIN 0x08
+
+#define BASE_INDENT	4
+
+/* If this stream descriptor is non-zero, then write
+   texinfo documentation to it. */
+FILE *documentation_file = (FILE *)NULL;
+
+/* Non-zero means to only produce documentation. */
+int only_documentation = 0;
+
+/* Non-zero means to not do any productions. */
+int inhibit_production = 0;
+
+/* Non-zero means to not add functions (xxx_builtin) to the members of the
+   produced `struct builtin []' */
+int inhibit_functions = 0;
+
+/* Non-zero means to produce separate help files for each builtin, named by
+   the builtin name, in `./helpfiles'. */
+int separate_helpfiles = 0;
+
+/* Non-zero means to create single C strings for each `longdoc', with
+   embedded newlines, for ease of translation. */
+int single_longdoc_strings = 1;
+
+/* The name of a directory into which the separate external help files will
+   eventually be installed. */
+char *helpfile_directory;
+
+/* The name of a directory to precede the filename when reporting
+   errors. */
+char *error_directory = (char *)NULL;
+
+/* The name of the structure file. */
+char *struct_filename = (char *)NULL;
+
+/* The name of the external declaration file. */
+char *extern_filename = (char *)NULL;
+
+/* Here is a structure for manipulating arrays of data. */
+typedef struct {
+  int size;		/* Number of slots allocated to array. */
+  int sindex;		/* Current location in array. */
+  int width;		/* Size of each element. */
+  int growth_rate;	/* How fast to grow. */
+  char **array;		/* The array itself. */
+} ARRAY;
+
+/* Here is a structure defining a single BUILTIN. */
+typedef struct {
+  char *name;		/* The name of this builtin. */
+  char *function;	/* The name of the function to call. */
+  char *shortdoc;	/* The short documentation for this builtin. */
+  char *docname;	/* Possible name for documentation string. */
+  ARRAY *longdoc;	/* The long documentation for this builtin. */
+  ARRAY *dependencies;	/* Null terminated array of #define names. */
+  int flags;		/* Flags for this builtin. */
+} BUILTIN_DESC;
+
+/* Here is a structure which defines a DEF file. */
+typedef struct {
+  char *filename;	/* The name of the input def file. */
+  ARRAY *lines;		/* The contents of the file. */
+  int line_number;	/* The current line number. */
+  char *production;	/* The name of the production file. */
+  FILE *output;		/* Open file stream for PRODUCTION. */
+  ARRAY *builtins;	/* Null terminated array of BUILTIN_DESC *. */
+} DEF_FILE;
+
+/* The array of all builtins encountered during execution of this code. */
+ARRAY *saved_builtins = (ARRAY *)NULL;
+
+/* The Posix.2 so-called `special' builtins. */
+char *special_builtins[] =
+{
+  ":", ".", "source", "break", "continue", "eval", "exec", "exit",
+  "export", "readonly", "return", "set", "shift", "times", "trap", "unset",
+  (char *)NULL
+};
+
+/* The builtin commands that take assignment statements as arguments. */
+char *assignment_builtins[] =
+{
+  "alias", "declare", "export", "local", "readonly", "typeset",
+  (char *)NULL
+};
+
+char *localvar_builtins[] =
+{
+  "declare", "local", "typeset", (char *)NULL
+};
+
+/* The builtin commands that are special to the POSIX search order. */
+char *posix_builtins[] =
+{
+  "alias", "bg", "cd", "command", "false", "fc", "fg", "getopts", "jobs",
+  "kill", "newgrp", "pwd", "read", "true", "umask", "unalias", "wait",
+  (char *)NULL
+};
+
+/* Forward declarations. */
+static int is_special_builtin ();
+static int is_assignment_builtin ();
+static int is_localvar_builtin ();
+static int is_posix_builtin ();
+
+#if !defined (HAVE_RENAME)
+static int rename ();
+#endif
+
+void extract_info ();
+
+void file_error ();
+void line_error ();
+
+void write_file_headers ();
+void write_file_footers ();
+void write_ifdefs ();
+void write_endifs ();
+void write_documentation ();
+void write_longdocs ();
+void write_builtins ();
+
+int write_helpfiles ();
+
+void free_defs ();
+void add_documentation ();
+
+void must_be_building ();
+void remove_trailing_whitespace ();
+
+#define document_name(b)	((b)->docname ? (b)->docname : (b)->name)
+
+
+/* For each file mentioned on the command line, process it and
+   write the information to STRUCTFILE and EXTERNFILE, while
+   creating the production file if necessary. */
+int
+main (argc, argv)
+     int argc;
+     char **argv;
+{
+  int arg_index = 1;
+  FILE *structfile, *externfile;
+  char *documentation_filename, *temp_struct_filename;
+
+  structfile = externfile = (FILE *)NULL;
+  documentation_filename = DOCFILE;
+  temp_struct_filename = (char *)NULL;
+
+  while (arg_index < argc && argv[arg_index][0] == '-')
+    {
+      char *arg = argv[arg_index++];
+
+      if (strcmp (arg, "-externfile") == 0)
+	extern_filename = argv[arg_index++];
+      else if (strcmp (arg, "-structfile") == 0)
+	struct_filename = argv[arg_index++];
+      else if (strcmp (arg, "-noproduction") == 0)
+	inhibit_production = 1;
+      else if (strcmp (arg, "-nofunctions") == 0)
+	inhibit_functions = 1;
+      else if (strcmp (arg, "-document") == 0)
+	documentation_file = fopen (documentation_filename, "w");
+      else if (strcmp (arg, "-D") == 0)
+	{
+	  int len;
+
+	  if (error_directory)
+	    free (error_directory);
+
+	  error_directory = xmalloc (2 + strlen (argv[arg_index]));
+	  strcpy (error_directory, argv[arg_index]);
+	  len = strlen (error_directory);
+
+	  if (len && error_directory[len - 1] != '/')
+	    strcat (error_directory, "/");
+
+	  arg_index++;
+	}
+      else if (strcmp (arg, "-documentonly") == 0)
+	{
+	  only_documentation = 1;
+	  documentation_file = fopen (documentation_filename, "w");
+	}
+      else if (strcmp (arg, "-H") == 0)
+        {
+	  separate_helpfiles = 1;
+	  helpfile_directory = argv[arg_index++];
+        }
+      else if (strcmp (arg, "-S") == 0)
+	single_longdoc_strings = 0;
+      else
+	{
+	  fprintf (stderr, "%s: Unknown flag %s.\n", argv[0], arg);
+	  exit (2);
+	}
+    }
+
+  /* If there are no files to process, just quit now. */
+  if (arg_index == argc)
+    exit (0);
+
+  if (!only_documentation)
+    {
+      /* Open the files. */
+      if (struct_filename)
+	{
+	  temp_struct_filename = xmalloc (15);
+	  sprintf (temp_struct_filename, "mk-%ld", (long) getpid ());
+	  structfile = fopen (temp_struct_filename, "w");
+
+	  if (!structfile)
+	    file_error (temp_struct_filename);
+	}
+
+      if (extern_filename)
+	{
+	  externfile = fopen (extern_filename, "w");
+
+	  if (!externfile)
+	    file_error (extern_filename);
+	}
+
+      /* Write out the headers. */
+      write_file_headers (structfile, externfile);
+    }
+
+  if (documentation_file)
+    {
+      fprintf (documentation_file, "@c Table of builtins created with %s.\n",
+	       argv[0]);
+      fprintf (documentation_file, "@ftable @asis\n");
+    }
+
+  /* Process the .def files. */
+  while (arg_index < argc)
+    {
+      register char *arg;
+
+      arg = argv[arg_index++];
+
+      extract_info (arg, structfile, externfile);
+    }
+
+  /* Close the files. */
+  if (!only_documentation)
+    {
+      /* Write the footers. */
+      write_file_footers (structfile, externfile);
+
+      if (structfile)
+	{
+	  write_longdocs (structfile, saved_builtins);
+	  fclose (structfile);
+	  rename (temp_struct_filename, struct_filename);
+	}
+
+      if (externfile)
+	fclose (externfile);
+    }
+
+#if 0
+  /* This is now done by a different program */
+  if (separate_helpfiles)
+    {
+      write_helpfiles (saved_builtins);
+    }
+#endif
+
+  if (documentation_file)
+    {
+      fprintf (documentation_file, "@end ftable\n");
+      fclose (documentation_file);
+    }
+
+  exit (0);
+}
+
+/* **************************************************************** */
+/*								    */
+/*		  Array Functions and Manipulators		    */
+/*								    */
+/* **************************************************************** */
+
+/* Make a new array, and return a pointer to it.  The array will
+   contain elements of size WIDTH, and is initialized to no elements. */
+ARRAY *
+array_create (width)
+     int width;
+{
+  ARRAY *array;
+
+  array = (ARRAY *)xmalloc (sizeof (ARRAY));
+  array->size = 0;
+  array->sindex = 0;
+  array->width = width;
+
+  /* Default to increasing size in units of 20. */
+  array->growth_rate = 20;
+
+  array->array = (char **)NULL;
+
+  return (array);
+}
+
+/* Copy the array of strings in ARRAY. */
+ARRAY *
+copy_string_array (array)
+     ARRAY *array;
+{
+  register int i;
+  ARRAY *copy;
+
+  if (!array)
+    return (ARRAY *)NULL;
+
+  copy = array_create (sizeof (char *));
+
+  copy->size = array->size;
+  copy->sindex = array->sindex;
+  copy->width = array->width;
+
+  copy->array = (char **)xmalloc ((1 + array->sindex) * sizeof (char *));
+  
+  for (i = 0; i < array->sindex; i++)
+    copy->array[i] = savestring (array->array[i]);
+
+  copy->array[i] = (char *)NULL;
+
+  return (copy);
+}
+
+/* Add ELEMENT to ARRAY, growing the array if necessary. */
+void
+array_add (element, array)
+     char *element;
+     ARRAY *array;
+{
+  if (array->sindex + 2 > array->size)
+    array->array = (char **)xrealloc
+      (array->array, (array->size += array->growth_rate) * array->width);
+
+  array->array[array->sindex++] = element;
+  array->array[array->sindex] = (char *)NULL;
+}
+
+/* Free an allocated array and data pointer. */
+void
+array_free (array)
+     ARRAY *array;
+{
+  if (array->array)
+    free (array->array);
+
+  free (array);
+}
+
+/* **************************************************************** */
+/*								    */
+/*		       Processing a DEF File			    */
+/*								    */
+/* **************************************************************** */
+
+/* The definition of a function. */
+typedef int Function ();
+typedef int mk_handler_func_t PARAMS((char *, DEF_FILE *, char *));
+
+/* Structure handles processor directives. */
+typedef struct {
+  char *directive;
+  mk_handler_func_t *function;
+} HANDLER_ENTRY;
+
+extern int builtin_handler PARAMS((char *, DEF_FILE *, char *));
+extern int function_handler PARAMS((char *, DEF_FILE *, char *));
+extern int short_doc_handler PARAMS((char *, DEF_FILE *, char *));
+extern int comment_handler PARAMS((char *, DEF_FILE *, char *));
+extern int depends_on_handler PARAMS((char *, DEF_FILE *, char *));
+extern int produces_handler PARAMS((char *, DEF_FILE *, char *));
+extern int end_handler PARAMS((char *, DEF_FILE *, char *));
+extern int docname_handler PARAMS((char *, DEF_FILE *, char *));
+
+HANDLER_ENTRY handlers[] = {
+  { "BUILTIN", builtin_handler },
+  { "DOCNAME", docname_handler },
+  { "FUNCTION", function_handler },
+  { "SHORT_DOC", short_doc_handler },
+  { "$", comment_handler },
+  { "COMMENT", comment_handler },
+  { "DEPENDS_ON", depends_on_handler },
+  { "PRODUCES", produces_handler },
+  { "END", end_handler },
+  { (char *)NULL, (mk_handler_func_t *)NULL }
+};
+
+/* Return the entry in the table of handlers for NAME. */
+HANDLER_ENTRY *
+find_directive (directive)
+     char *directive;
+{
+  register int i;
+
+  for (i = 0; handlers[i].directive; i++)
+    if (strcmp (handlers[i].directive, directive) == 0)
+      return (&handlers[i]);
+
+  return ((HANDLER_ENTRY *)NULL);
+}
+
+/* Non-zero indicates that a $BUILTIN has been seen, but not
+   the corresponding $END. */
+static int building_builtin = 0;
+
+/* Non-zero means to output cpp line and file information before
+   printing the current line to the production file. */
+int output_cpp_line_info = 0;
+
+/* The main function of this program.  Read FILENAME and act on what is
+   found.  Lines not starting with a dollar sign are copied to the
+   $PRODUCES target, if one is present.  Lines starting with a dollar sign
+   are directives to this program, specifying the name of the builtin, the
+   function to call, the short documentation and the long documentation
+   strings.  FILENAME can contain multiple $BUILTINs, but only one $PRODUCES
+   target.  After the file has been processed, write out the names of
+   builtins found in each $BUILTIN.  Plain text found before the $PRODUCES
+   is ignored, as is "$$ comment text". */
+void
+extract_info (filename, structfile, externfile)
+     char *filename;
+     FILE *structfile, *externfile;
+{
+  register int i;
+  DEF_FILE *defs;
+  struct stat finfo;
+  size_t file_size;
+  char *buffer, *line;
+  int fd, nr;
+
+  if (stat (filename, &finfo) == -1)
+    file_error (filename);
+
+  fd = open (filename, O_RDONLY, 0666);
+
+  if (fd == -1)
+    file_error (filename);
+
+  file_size = (size_t)finfo.st_size;
+  buffer = xmalloc (1 + file_size);
+
+  if ((nr = read (fd, buffer, file_size)) < 0)
+    file_error (filename);
+
+  /* This is needed on WIN32, and does not hurt on Unix. */
+  if (nr < file_size)
+    file_size = nr;
+
+  close (fd);
+
+  if (nr == 0)
+    {
+      fprintf (stderr, "mkbuiltins: %s: skipping zero-length file\n", filename);
+      free (buffer);
+      return;
+    }
+
+  /* Create and fill in the initial structure describing this file. */
+  defs = (DEF_FILE *)xmalloc (sizeof (DEF_FILE));
+  defs->filename = filename;
+  defs->lines = array_create (sizeof (char *));
+  defs->line_number = 0;
+  defs->production = (char *)NULL;
+  defs->output = (FILE *)NULL;
+  defs->builtins = (ARRAY *)NULL;
+
+  /* Build the array of lines. */
+  i = 0;
+  while (i < file_size)
+    {
+      array_add (&buffer[i], defs->lines);
+
+      while (i < file_size && buffer[i] != '\n')
+	i++;
+      buffer[i++] = '\0';
+    }
+
+  /* Begin processing the input file.  We don't write any output
+     until we have a file to write output to. */
+  output_cpp_line_info = 1;
+
+  /* Process each line in the array. */
+  for (i = 0; line = defs->lines->array[i]; i++)
+    {
+      defs->line_number = i;
+
+      if (*line == '$')
+	{
+	  register int j;
+	  char *directive;
+	  HANDLER_ENTRY *handler;
+
+	  /* Isolate the directive. */
+	  for (j = 0; line[j] && !whitespace (line[j]); j++);
+
+	  directive = xmalloc (j);
+	  strncpy (directive, line + 1, j - 1);
+	  directive[j -1] = '\0';
+
+	  /* Get the function handler and call it. */
+	  handler = find_directive (directive);
+
+	  if (!handler)
+	    {
+	      line_error (defs, "Unknown directive `%s'", directive);
+	      free (directive);
+	      continue;
+	    }
+	  else
+	    {
+	      /* Advance to the first non-whitespace character. */
+	      while (whitespace (line[j]))
+		j++;
+
+	      /* Call the directive handler with the FILE, and ARGS. */
+	      (*(handler->function)) (directive, defs, line + j);
+	    }
+	  free (directive);
+	}
+      else
+	{
+	  if (building_builtin)
+	    add_documentation (defs, line);
+	  else if (defs->output)
+	    {
+	      if (output_cpp_line_info)
+		{
+		  /* If we're handed an absolute pathname, don't prepend
+		     the directory name. */
+		  if (defs->filename[0] == '/')
+		    fprintf (defs->output, "#line %d \"%s\"\n",
+			     defs->line_number + 1, defs->filename);
+		  else
+		    fprintf (defs->output, "#line %d \"%s%s\"\n",
+			     defs->line_number + 1,
+			     error_directory ? error_directory : "./",
+			     defs->filename);
+		  output_cpp_line_info = 0;
+		}
+
+	      fprintf (defs->output, "%s\n", line);
+	    }
+	}
+    }
+
+  /* Close the production file. */
+  if (defs->output)
+    fclose (defs->output);
+
+  /* The file has been processed.  Write the accumulated builtins to
+     the builtins.c file, and write the extern definitions to the
+     builtext.h file. */
+  write_builtins (defs, structfile, externfile);
+
+  free (buffer);
+  free_defs (defs);
+}
+
+#define free_safely(x) if (x) free (x)
+
+static void
+free_builtin (builtin)
+     BUILTIN_DESC *builtin;
+{
+  register int i;
+
+  free_safely (builtin->name);
+  free_safely (builtin->function);
+  free_safely (builtin->shortdoc);
+  free_safely (builtin->docname);
+
+  if (builtin->longdoc)
+    array_free (builtin->longdoc);
+
+  if (builtin->dependencies)
+    {
+      for (i = 0; builtin->dependencies->array[i]; i++)
+	free (builtin->dependencies->array[i]);
+      array_free (builtin->dependencies);
+    }
+}
+
+/* Free all of the memory allocated to a DEF_FILE. */
+void
+free_defs (defs)
+     DEF_FILE *defs;
+{
+  register int i;
+  register BUILTIN_DESC *builtin;
+
+  if (defs->production)
+    free (defs->production);
+
+  if (defs->lines)
+    array_free (defs->lines);
+
+  if (defs->builtins)
+    {
+      for (i = 0; builtin = (BUILTIN_DESC *)defs->builtins->array[i]; i++)
+	{
+	  free_builtin (builtin);
+	  free (builtin);
+	}
+      array_free (defs->builtins);
+    }
+  free (defs);
+}
+
+/* **************************************************************** */
+/*								    */
+/*		     The Handler Functions Themselves		    */
+/*								    */
+/* **************************************************************** */
+
+/* Strip surrounding whitespace from STRING, and
+   return a pointer to the start of it. */
+char *
+strip_whitespace (string)
+     char *string;
+{
+  while (whitespace (*string))
+      string++;
+
+  remove_trailing_whitespace (string);
+  return (string);
+}
+
+/* Remove only the trailing whitespace from STRING. */
+void
+remove_trailing_whitespace (string)
+     char *string;
+{
+  register int i;
+
+  i = strlen (string) - 1;
+
+  while (i > 0 && whitespace (string[i]))
+    i--;
+
+  string[++i] = '\0';
+}
+
+/* Ensure that there is a argument in STRING and return it.
+   FOR_WHOM is the name of the directive which needs the argument.
+   DEFS is the DEF_FILE in which the directive is found.
+   If there is no argument, produce an error. */
+char *
+get_arg (for_whom, defs, string)
+     char *for_whom, *string;
+     DEF_FILE *defs;
+{
+  char *new;
+
+  new = strip_whitespace (string);
+
+  if (!*new)
+    line_error (defs, "%s requires an argument", for_whom);
+
+  return (savestring (new));
+}
+
+/* Error if not building a builtin. */
+void
+must_be_building (directive, defs)
+     char *directive;
+     DEF_FILE *defs;
+{
+  if (!building_builtin)
+    line_error (defs, "%s must be inside of a $BUILTIN block", directive);
+}
+
+/* Return the current builtin. */
+BUILTIN_DESC *
+current_builtin (directive, defs)
+     char *directive;
+     DEF_FILE *defs;
+{
+  must_be_building (directive, defs);
+  if (defs->builtins)
+    return ((BUILTIN_DESC *)defs->builtins->array[defs->builtins->sindex - 1]);
+  else
+    return ((BUILTIN_DESC *)NULL);
+}
+
+/* Add LINE to the long documentation for the current builtin.
+   Ignore blank lines until the first non-blank line has been seen. */
+void
+add_documentation (defs, line)
+     DEF_FILE *defs;
+     char *line;
+{
+  register BUILTIN_DESC *builtin;
+
+  builtin = current_builtin ("(implied LONGDOC)", defs);
+
+  remove_trailing_whitespace (line);
+
+  if (!*line && !builtin->longdoc)
+    return;
+
+  if (!builtin->longdoc)
+    builtin->longdoc = array_create (sizeof (char *));
+
+  array_add (line, builtin->longdoc);
+}
+
+/* How to handle the $BUILTIN directive. */
+int
+builtin_handler (self, defs, arg)
+     char *self;
+     DEF_FILE *defs;
+     char *arg;
+{
+  BUILTIN_DESC *new;
+  char *name;
+
+  /* If we are already building a builtin, we cannot start a new one. */
+  if (building_builtin)
+    {
+      line_error (defs, "%s found before $END", self);
+      return (-1);
+    }
+
+  output_cpp_line_info++;
+
+  /* Get the name of this builtin, and stick it in the array. */
+  name = get_arg (self, defs, arg);
+
+  /* If this is the first builtin, create the array to hold them. */
+  if (!defs->builtins)
+    defs->builtins = array_create (sizeof (BUILTIN_DESC *));
+
+  new = (BUILTIN_DESC *)xmalloc (sizeof (BUILTIN_DESC));
+  new->name = name;
+  new->function = (char *)NULL;
+  new->shortdoc = (char *)NULL;
+  new->docname = (char *)NULL;
+  new->longdoc = (ARRAY *)NULL;
+  new->dependencies = (ARRAY *)NULL;
+  new->flags = 0;
+
+  if (is_special_builtin (name))
+    new->flags |= BUILTIN_FLAG_SPECIAL;
+  if (is_assignment_builtin (name))
+    new->flags |= BUILTIN_FLAG_ASSIGNMENT;
+  if (is_localvar_builtin (name))
+    new->flags |= BUILTIN_FLAG_LOCALVAR;
+  if (is_posix_builtin (name))
+    new->flags |= BUILTIN_FLAG_POSIX_BUILTIN;
+
+  array_add ((char *)new, defs->builtins);
+  building_builtin = 1;
+
+  return (0);
+}
+
+/* How to handle the $FUNCTION directive. */
+int
+function_handler (self, defs, arg)
+     char *self;
+     DEF_FILE *defs;
+     char *arg;
+{
+  register BUILTIN_DESC *builtin;
+
+  builtin = current_builtin (self, defs);
+
+  if (builtin == 0)
+    {
+      line_error (defs, "syntax error: no current builtin for $FUNCTION directive");
+      exit (1);
+    }
+  if (builtin->function)
+    line_error (defs, "%s already has a function (%s)",
+		builtin->name, builtin->function);
+  else
+    builtin->function = get_arg (self, defs, arg);
+
+  return (0);
+}
+
+/* How to handle the $DOCNAME directive. */
+int
+docname_handler (self, defs, arg)
+     char *self;
+     DEF_FILE *defs;
+     char *arg;
+{
+  register BUILTIN_DESC *builtin;
+
+  builtin = current_builtin (self, defs);
+
+  if (builtin->docname)
+    line_error (defs, "%s already had a docname (%s)",
+		builtin->name, builtin->docname);
+  else
+    builtin->docname = get_arg (self, defs, arg);
+
+  return (0);
+}
+
+/* How to handle the $SHORT_DOC directive. */
+int
+short_doc_handler (self, defs, arg)
+     char *self;
+     DEF_FILE *defs;
+     char *arg;
+{
+  register BUILTIN_DESC *builtin;
+
+  builtin = current_builtin (self, defs);
+
+  if (builtin->shortdoc)
+    line_error (defs, "%s already has short documentation (%s)",
+		builtin->name, builtin->shortdoc);
+  else
+    builtin->shortdoc = get_arg (self, defs, arg);
+
+  return (0);
+}
+
+/* How to handle the $COMMENT directive. */
+int
+comment_handler (self, defs, arg)
+     char *self;
+     DEF_FILE *defs;
+     char *arg;
+{
+  return (0);
+}
+
+/* How to handle the $DEPENDS_ON directive. */
+int
+depends_on_handler (self, defs, arg)
+     char *self;
+     DEF_FILE *defs;
+     char *arg;
+{
+  register BUILTIN_DESC *builtin;
+  char *dependent;
+
+  builtin = current_builtin (self, defs);
+  dependent = get_arg (self, defs, arg);
+
+  if (!builtin->dependencies)
+    builtin->dependencies = array_create (sizeof (char *));
+
+  array_add (dependent, builtin->dependencies);
+
+  return (0);
+}
+
+/* How to handle the $PRODUCES directive. */
+int
+produces_handler (self, defs, arg)
+     char *self;
+     DEF_FILE *defs;
+     char *arg;
+{
+  /* If just hacking documentation, don't change any of the production
+     files. */
+  if (only_documentation)
+    return (0);
+
+  output_cpp_line_info++;
+
+  if (defs->production)
+    line_error (defs, "%s already has a %s definition", defs->filename, self);
+  else
+    {
+      defs->production = get_arg (self, defs, arg);
+
+      if (inhibit_production)
+	return (0);
+
+      defs->output = fopen (defs->production, "w");
+
+      if (!defs->output)
+	file_error (defs->production);
+
+      fprintf (defs->output, "/* %s, created from %s. */\n",
+	       defs->production, defs->filename);
+    }
+  return (0);
+}
+
+/* How to handle the $END directive. */
+int
+end_handler (self, defs, arg)
+     char *self;
+     DEF_FILE *defs;
+     char *arg;
+{
+  must_be_building (self, defs);
+  building_builtin = 0;
+  return (0);
+}
+
+/* **************************************************************** */
+/*								    */
+/*		    Error Handling Functions			    */
+/*								    */
+/* **************************************************************** */
+
+/* Produce an error for DEFS with FORMAT and ARGS. */
+void
+line_error (defs, format, arg1, arg2)
+     DEF_FILE *defs;
+     char *format, *arg1, *arg2;
+{
+  if (defs->filename[0] != '/')
+    fprintf (stderr, "%s", error_directory ? error_directory : "./");
+  fprintf (stderr, "%s:%d:", defs->filename, defs->line_number + 1);
+  fprintf (stderr, format, arg1, arg2);
+  fprintf (stderr, "\n");
+  fflush (stderr);
+}
+
+/* Print error message for FILENAME. */
+void
+file_error (filename)
+     char *filename;
+{
+  perror (filename);
+  exit (2);
+}
+
+/* **************************************************************** */
+/*								    */
+/*			xmalloc and xrealloc ()		     	    */
+/*								    */
+/* **************************************************************** */
+
+static void memory_error_and_abort ();
+
+static char *
+xmalloc (bytes)
+     int bytes;
+{
+  char *temp = (char *)malloc (bytes);
+
+  if (!temp)
+    memory_error_and_abort ();
+  return (temp);
+}
+
+static char *
+xrealloc (pointer, bytes)
+     char *pointer;
+     int bytes;
+{
+  char *temp;
+
+  if (!pointer)
+    temp = (char *)malloc (bytes);
+  else
+    temp = (char *)realloc (pointer, bytes);
+
+  if (!temp)
+    memory_error_and_abort ();
+
+  return (temp);
+}
+
+static void
+memory_error_and_abort ()
+{
+  fprintf (stderr, "mkbuiltins: out of virtual memory\n");
+  abort ();
+}
+
+/* **************************************************************** */
+/*								    */
+/*		  Creating the Struct and Extern Files		    */
+/*								    */
+/* **************************************************************** */
+
+/* Return a pointer to a newly allocated builtin which is
+   an exact copy of BUILTIN. */
+BUILTIN_DESC *
+copy_builtin (builtin)
+     BUILTIN_DESC *builtin;
+{
+  BUILTIN_DESC *new;
+
+  new = (BUILTIN_DESC *)xmalloc (sizeof (BUILTIN_DESC));
+
+  new->name = savestring (builtin->name);
+  new->shortdoc = savestring (builtin->shortdoc);
+  new->longdoc = copy_string_array (builtin->longdoc);
+  new->dependencies = copy_string_array (builtin->dependencies);
+
+  new->function =
+    builtin->function ? savestring (builtin->function) : (char *)NULL;
+  new->docname =
+    builtin->docname  ? savestring (builtin->docname)  : (char *)NULL;
+
+  return (new);
+}
+
+/* How to save away a builtin. */
+void
+save_builtin (builtin)
+     BUILTIN_DESC *builtin;
+{
+  BUILTIN_DESC *newbuiltin;
+
+  newbuiltin = copy_builtin (builtin);
+
+  /* If this is the first builtin to be saved, create the array
+     to hold it. */
+  if (!saved_builtins)
+      saved_builtins = array_create (sizeof (BUILTIN_DESC *));
+
+  array_add ((char *)newbuiltin, saved_builtins);
+}
+
+/* Flags that mean something to write_documentation (). */
+#define STRING_ARRAY	0x01
+#define TEXINFO		0x02
+#define PLAINTEXT	0x04
+#define HELPFILE	0x08
+
+char *structfile_header[] = {
+  "/* builtins.c -- the built in shell commands. */",
+  "",
+  "/* This file is manufactured by ./mkbuiltins, and should not be",
+  "   edited by hand.  See the source to mkbuiltins for details. */",
+  "",
+  "/* Copyright (C) 1987-2015 Free Software Foundation, Inc.",
+  "",
+  "   This file is part of GNU Bash, the Bourne Again SHell.",
+  "",
+  "   Bash is free software: you can redistribute it and/or modify",
+  "   it under the terms of the GNU General Public License as published by",
+  "   the Free Software Foundation, either version 3 of the License, or",
+  "   (at your option) any later version.",
+  "",
+  "   Bash is distributed in the hope that it will be useful,",
+  "   but WITHOUT ANY WARRANTY; without even the implied warranty of",
+  "   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the",
+  "   GNU General Public License for more details.",
+  "",
+  "   You should have received a copy of the GNU General Public License",
+  "   along with Bash.  If not, see <http://www.gnu.org/licenses/>.",
+  "*/",
+  "",
+  "/* The list of shell builtins.  Each element is name, function, flags,",
+  "   long-doc, short-doc.  The long-doc field contains a pointer to an array",
+  "   of help lines.  The function takes a WORD_LIST *; the first word in the",
+  "   list is the first arg to the command.  The list has already had word",
+  "   expansion performed.",
+  "",
+  "   Functions which need to look at only the simple commands (e.g.",
+  "   the enable_builtin ()), should ignore entries where",
+  "   (array[i].function == (sh_builtin_func_t *)NULL).  Such entries are for",
+  "   the list of shell reserved control structures, like `if' and `while'.",
+  "   The end of the list is denoted with a NULL name field. */",
+  "",
+  "/* TRANSLATORS: Please do not translate command names in descriptions */",
+  "",
+  "#include \"../builtins.h\"",
+  (char *)NULL
+  };
+
+char *structfile_footer[] = {
+  "  { (char *)0x0, (sh_builtin_func_t *)0x0, 0, (char **)0x0, (char *)0x0, (char *)0x0 }",
+  "};",
+  "",
+  "struct builtin *shell_builtins = static_shell_builtins;",
+  "struct builtin *current_builtin;",
+  "",
+  "int num_shell_builtins =",
+  "\tsizeof (static_shell_builtins) / sizeof (struct builtin) - 1;",
+  (char *)NULL
+};
+
+/* Write out any necessary opening information for
+   STRUCTFILE and EXTERNFILE. */
+void
+write_file_headers (structfile, externfile)
+     FILE *structfile, *externfile;
+{
+  register int i;
+
+  if (structfile)
+    {
+      for (i = 0; structfile_header[i]; i++)
+	fprintf (structfile, "%s\n", structfile_header[i]);
+
+      fprintf (structfile, "#include \"%s\"\n",
+	       extern_filename ? extern_filename : "builtext.h");
+
+      fprintf (structfile, "#include \"bashintl.h\"\n");
+
+      fprintf (structfile, "\nstruct builtin static_shell_builtins[] = {\n");
+    }
+
+  if (externfile)
+    fprintf (externfile,
+	     "/* %s - The list of builtins found in libbuiltins.a. */\n",
+	     extern_filename ? extern_filename : "builtext.h");
+}
+
+/* Write out any necessary closing information for
+   STRUCTFILE and EXTERNFILE. */
+void
+write_file_footers (structfile, externfile)
+     FILE *structfile, *externfile;
+{
+  register int i;
+
+  /* Write out the footers. */
+  if (structfile)
+    {
+      for (i = 0; structfile_footer[i]; i++)
+	fprintf (structfile, "%s\n", structfile_footer[i]);
+    }
+}
+
+/* Write out the information accumulated in DEFS to
+   STRUCTFILE and EXTERNFILE. */
+void
+write_builtins (defs, structfile, externfile)
+     DEF_FILE *defs;
+     FILE *structfile, *externfile;
+{
+  register int i;
+
+  /* Write out the information. */
+  if (defs->builtins)
+    {
+      register BUILTIN_DESC *builtin;
+
+      for (i = 0; i < defs->builtins->sindex; i++)
+	{
+	  builtin = (BUILTIN_DESC *)defs->builtins->array[i];
+
+	  /* Write out any #ifdefs that may be there. */
+	  if (!only_documentation)
+	    {
+	      if (builtin->dependencies)
+		{
+		  write_ifdefs (externfile, builtin->dependencies->array);
+		  write_ifdefs (structfile, builtin->dependencies->array);
+		}
+
+	      /* Write the extern definition. */
+	      if (externfile)
+		{
+		  if (builtin->function)
+		    fprintf (externfile, "extern int %s PARAMS((WORD_LIST *));\n",
+			     builtin->function);
+
+		  fprintf (externfile, "extern char * const %s_doc[];\n",
+			   document_name (builtin));
+		}
+
+	      /* Write the structure definition. */
+	      if (structfile)
+		{
+		  fprintf (structfile, "  { \"%s\", ", builtin->name);
+
+		  if (builtin->function && inhibit_functions == 0)
+		    fprintf (structfile, "%s, ", builtin->function);
+		  else
+		    fprintf (structfile, "(sh_builtin_func_t *)0x0, ");
+
+		  fprintf (structfile, "%s%s%s%s%s, %s_doc,\n",
+		    "BUILTIN_ENABLED | STATIC_BUILTIN",
+		    (builtin->flags & BUILTIN_FLAG_SPECIAL) ? " | SPECIAL_BUILTIN" : "",
+		    (builtin->flags & BUILTIN_FLAG_ASSIGNMENT) ? " | ASSIGNMENT_BUILTIN" : "",
+		    (builtin->flags & BUILTIN_FLAG_LOCALVAR) ? " | LOCALVAR_BUILTIN" : "",
+		    (builtin->flags & BUILTIN_FLAG_POSIX_BUILTIN) ? " | POSIX_BUILTIN" : "",
+		    document_name (builtin));
+
+		  /* Don't translate short document summaries that are identical
+		     to command names */
+		  if (builtin->shortdoc && strcmp (builtin->name, builtin->shortdoc) == 0)
+		    {
+		      if (inhibit_functions)
+			fprintf (structfile, "     \"%s\", \"%s\" },\n",
+			  builtin->shortdoc ? builtin->shortdoc : builtin->name,
+			  document_name (builtin));
+		      else
+			fprintf (structfile, "     \"%s\", (char *)NULL },\n",
+			  builtin->shortdoc ? builtin->shortdoc : builtin->name);
+		    }
+		  else
+		    {
+		      if (inhibit_functions)
+			fprintf (structfile, "     N_(\"%s\"), \"%s\" },\n",
+			  builtin->shortdoc ? builtin->shortdoc : builtin->name,
+			  document_name (builtin));
+		      else
+			fprintf (structfile, "     N_(\"%s\"), (char *)NULL },\n",
+			  builtin->shortdoc ? builtin->shortdoc : builtin->name);
+		    }
+		}
+
+	      if (structfile || separate_helpfiles)
+		/* Save away this builtin for later writing of the
+		   long documentation strings. */
+		save_builtin (builtin);
+
+	      /* Write out the matching #endif, if necessary. */
+	      if (builtin->dependencies)
+		{
+		  if (externfile)
+		    write_endifs (externfile, builtin->dependencies->array);
+
+		  if (structfile)
+		    write_endifs (structfile, builtin->dependencies->array);
+		}
+	    }
+
+	  if (documentation_file)
+	    {
+	      fprintf (documentation_file, "@item %s\n", builtin->name);
+	      write_documentation
+		(documentation_file, builtin->longdoc->array, 0, TEXINFO);
+	    }
+	}
+    }
+}
+
+/* Write out the long documentation strings in BUILTINS to STREAM. */
+void
+write_longdocs (stream, builtins)
+     FILE *stream;
+     ARRAY *builtins;
+{
+  register int i;
+  register BUILTIN_DESC *builtin;
+  char *dname;
+  char *sarray[2];
+
+  for (i = 0; i < builtins->sindex; i++)
+    {
+      builtin = (BUILTIN_DESC *)builtins->array[i];
+
+      if (builtin->dependencies)
+	write_ifdefs (stream, builtin->dependencies->array);
+
+      /* Write the long documentation strings. */
+      dname = document_name (builtin);
+      fprintf (stream, "char * const %s_doc[] =", dname);
+
+      if (separate_helpfiles)
+	{
+	  int l = strlen (helpfile_directory) + strlen (dname) + 1;
+	  sarray[0] = (char *)xmalloc (l + 1);
+	  sprintf (sarray[0], "%s/%s", helpfile_directory, dname);
+	  sarray[1] = (char *)NULL;
+	  write_documentation (stream, sarray, 0, STRING_ARRAY|HELPFILE);
+	  free (sarray[0]);
+	}
+      else
+	write_documentation (stream, builtin->longdoc->array, 0, STRING_ARRAY);
+
+      if (builtin->dependencies)
+	write_endifs (stream, builtin->dependencies->array);
+
+    }
+}
+
+void
+write_dummy_declarations (stream, builtins)
+     FILE *stream;
+     ARRAY *builtins;
+{
+  register int i;
+  BUILTIN_DESC *builtin;
+
+  for (i = 0; structfile_header[i]; i++)
+    fprintf (stream, "%s\n", structfile_header[i]);
+
+  for (i = 0; i < builtins->sindex; i++)
+    {
+      builtin = (BUILTIN_DESC *)builtins->array[i];
+
+      /* How to guarantee that no builtin is written more than once? */
+      fprintf (stream, "int %s () { return (0); }\n", builtin->function);
+    }
+}
+
+/* Write an #ifdef string saying what needs to be defined (or not defined)
+   in order to allow compilation of the code that will follow.
+   STREAM is the stream to write the information to,
+   DEFINES is a null terminated array of define names.
+   If a define is preceded by an `!', then the sense of the test is
+   reversed. */
+void
+write_ifdefs (stream, defines)
+     FILE *stream;
+     char **defines;
+{
+  register int i;
+
+  if (!stream)
+    return;
+
+  fprintf (stream, "#if ");
+
+  for (i = 0; defines[i]; i++)
+    {
+      char *def = defines[i];
+
+      if (*def == '!')
+	fprintf (stream, "!defined (%s)", def + 1);
+      else
+	fprintf (stream, "defined (%s)", def);
+
+      if (defines[i + 1])
+	fprintf (stream, " && ");
+    }
+  fprintf (stream, "\n");
+}
+
+/* Write an #endif string saying what defines controlled the compilation
+   of the immediately preceding code.
+   STREAM is the stream to write the information to.
+   DEFINES is a null terminated array of define names. */
+void
+write_endifs (stream, defines)
+     FILE *stream;
+     char **defines;
+{
+  register int i;
+
+  if (!stream)
+    return;
+
+  fprintf (stream, "#endif /* ");
+
+  for (i = 0; defines[i]; i++)
+    {
+      fprintf (stream, "%s", defines[i]);
+
+      if (defines[i + 1])
+	fprintf (stream, " && ");
+    }
+
+  fprintf (stream, " */\n");
+}
+
+/* Write DOCUMENTATION to STREAM, perhaps surrounding it with double-quotes
+   and quoting special characters in the string.  Handle special things for
+   internationalization (gettext) and the single-string vs. multiple-strings
+   issues. */
+void
+write_documentation (stream, documentation, indentation, flags)
+     FILE *stream;
+     char **documentation;
+     int indentation, flags;
+{
+  register int i, j;
+  register char *line;
+  int string_array, texinfo, base_indent, filename_p;
+
+  if (stream == 0)
+    return;
+
+  string_array = flags & STRING_ARRAY;
+  filename_p = flags & HELPFILE;
+
+  if (string_array)
+    {
+      fprintf (stream, " {\n#if defined (HELP_BUILTIN)\n");	/* } */
+      if (single_longdoc_strings)
+	{
+	  if (filename_p == 0)
+	    {
+	      if (documentation && documentation[0] && documentation[0][0])
+		fprintf (stream,  "N_(\"");
+	      else
+		fprintf (stream, "N_(\" ");		/* the empty string translates specially. */
+	    }
+	  else
+	    fprintf (stream, "\"");
+	}
+    }
+
+  base_indent = (string_array && single_longdoc_strings && filename_p == 0) ? BASE_INDENT : 0;
+
+  for (i = 0, texinfo = (flags & TEXINFO); documentation && (line = documentation[i]); i++)
+    {
+      /* Allow #ifdef's to be written out verbatim, but don't put them into
+	 separate help files. */
+      if (*line == '#')
+	{
+	  if (string_array && filename_p == 0 && single_longdoc_strings == 0)
+	    fprintf (stream, "%s\n", line);
+	  continue;
+	}
+
+      /* prefix with N_( for gettext */
+      if (string_array && single_longdoc_strings == 0)
+	{
+	  if (filename_p == 0)
+	    {
+	      if (line[0])	      
+		fprintf (stream, "  N_(\"");
+	      else
+		fprintf (stream, "  N_(\" ");		/* the empty string translates specially. */
+	    }
+	  else
+	    fprintf (stream, "  \"");
+	}
+
+      if (indentation)
+	for (j = 0; j < indentation; j++)
+	  fprintf (stream, " ");
+
+      /* Don't indent the first line, because of how the help builtin works. */
+      if (i == 0)
+	indentation += base_indent;
+
+      if (string_array)
+	{
+	  for (j = 0; line[j]; j++)
+	    {
+	      switch (line[j])
+		{
+		case '\\':
+		case '"':
+		  fprintf (stream, "\\%c", line[j]);
+		  break;
+
+		default:
+		  fprintf (stream, "%c", line[j]);
+		}
+	    }
+
+	  /* closing right paren for gettext */
+	  if (single_longdoc_strings == 0)
+	    {
+	      if (filename_p == 0)
+		fprintf (stream, "\"),\n");
+	      else
+		fprintf (stream, "\",\n");
+	    }
+	  else if (documentation[i+1])
+	    /* don't add extra newline after last line */
+	    fprintf (stream, "\\n\\\n");
+	}
+      else if (texinfo)
+	{
+	  for (j = 0; line[j]; j++)
+	    {
+	      switch (line[j])
+		{
+		case '@':
+		case '{':
+		case '}':
+		  fprintf (stream, "@%c", line[j]);
+		  break;
+
+		default:
+		  fprintf (stream, "%c", line[j]);
+		}
+	    }
+	  fprintf (stream, "\n");
+	}
+      else
+	fprintf (stream, "%s\n", line);
+    }
+
+  /* closing right paren for gettext */
+  if (string_array && single_longdoc_strings)
+    {
+      if (filename_p == 0)
+	fprintf (stream, "\"),\n");
+      else
+	fprintf (stream, "\",\n");
+    }
+
+  if (string_array)
+    fprintf (stream, "#endif /* HELP_BUILTIN */\n  (char *)NULL\n};\n");
+}
+
+int
+write_helpfiles (builtins)
+     ARRAY *builtins;
+{
+  char *helpfile, *bname;
+  FILE *helpfp;
+  int i, hdlen;
+  BUILTIN_DESC *builtin;	
+
+  i = mkdir ("helpfiles", 0777);
+  if (i < 0 && errno != EEXIST)
+    {
+      fprintf (stderr, "write_helpfiles: helpfiles: cannot create directory\n");
+      return -1;
+    }
+
+  hdlen = strlen ("helpfiles/");
+  for (i = 0; i < builtins->sindex; i++)
+    {
+      builtin = (BUILTIN_DESC *)builtins->array[i];
+
+      bname = document_name (builtin);
+      helpfile = (char *)xmalloc (hdlen + strlen (bname) + 1);
+      sprintf (helpfile, "helpfiles/%s", bname);
+
+      helpfp = fopen (helpfile, "w");
+      if (helpfp == 0)
+	{
+	  fprintf (stderr, "write_helpfiles: cannot open %s\n", helpfile);
+	  free (helpfile);
+	  continue;
+	}
+
+      write_documentation (helpfp, builtin->longdoc->array, 4, PLAINTEXT);
+
+      fflush (helpfp);
+      fclose (helpfp);
+      free (helpfile);
+    }
+  return 0;
+}      
+      	        
+static int
+_find_in_table (name, name_table)
+     char *name, *name_table[];
+{
+  register int i;
+
+  for (i = 0; name_table[i]; i++)
+    if (strcmp (name, name_table[i]) == 0)
+      return 1;
+  return 0;
+}
+
+static int
+is_special_builtin (name)
+     char *name;
+{
+  return (_find_in_table (name, special_builtins));
+}
+
+static int
+is_assignment_builtin (name)
+     char *name;
+{
+  return (_find_in_table (name, assignment_builtins));
+}
+
+static int
+is_localvar_builtin (name)
+     char *name;
+{
+  return (_find_in_table (name, localvar_builtins));
+}
+
+static int
+is_posix_builtin (name)
+     char *name;
+{
+  return (_find_in_table (name, posix_builtins));
+}
+
+#if !defined (HAVE_RENAME)
+static int
+rename (from, to)
+     char *from, *to;
+{
+  unlink (to);
+  if (link (from, to) < 0)
+    return (-1);
+  unlink (from);
+  return (0);
+}
+#endif /* !HAVE_RENAME */
diff --git a/builtins/printf.def b/builtins/printf.def
new file mode 100644
index 0000000..0a5f489
--- /dev/null
+++ b/builtins/printf.def
@@ -0,0 +1,1272 @@
+This file is printf.def, from which is created printf.c.
+It implements the builtin "printf" in Bash.
+
+Copyright (C) 1997-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES printf.c
+
+$BUILTIN printf
+$FUNCTION printf_builtin
+$SHORT_DOC printf [-v var] format [arguments]
+Formats and prints ARGUMENTS under control of the FORMAT.
+
+Options:
+  -v var	assign the output to shell variable VAR rather than
+		display it on the standard output
+
+FORMAT is a character string which contains three types of objects: plain
+characters, which are simply copied to standard output; character escape
+sequences, which are converted and copied to the standard output; and
+format specifications, each of which causes printing of the next successive
+argument.
+
+In addition to the standard format specifications described in printf(1),
+printf interprets:
+
+  %b	expand backslash escape sequences in the corresponding argument
+  %q	quote the argument in a way that can be reused as shell input
+  %(fmt)T	output the date-time string resulting from using FMT as a format
+	        string for strftime(3)
+
+The format is re-used as necessary to consume all of the arguments.  If
+there are fewer arguments than the format requires,  extra format
+specifications behave as if a zero value or null string, as appropriate,
+had been supplied.
+
+Exit Status:
+Returns success unless an invalid option is given or a write or assignment
+error occurs.
+$END
+
+#include <config.h>
+
+#include "../bashtypes.h"
+
+#include <errno.h>
+#if defined (HAVE_LIMITS_H)
+#  include <limits.h>
+#else
+   /* Assume 32-bit ints. */
+#  define INT_MAX		2147483647
+#  define INT_MIN		(-2147483647-1)
+#endif
+
+#if defined (PREFER_STDARG)
+#  include <stdarg.h>
+#else
+#  include <varargs.h>
+#endif
+
+#include <stdio.h>
+#include <chartypes.h>
+
+#ifdef HAVE_INTTYPES_H
+#  include <inttypes.h>
+#endif
+
+#include "posixtime.h"
+#include "../bashansi.h"
+#include "../bashintl.h"
+
+#define NEED_STRFTIME_DECL
+
+#include "../shell.h"
+#include "shmbutil.h"
+#include "stdc.h"
+#include "bashgetopt.h"
+#include "common.h"
+
+#if defined (PRI_MACROS_BROKEN)
+#  undef PRIdMAX
+#endif
+
+#if !defined (PRIdMAX)
+#  if HAVE_LONG_LONG
+#    define PRIdMAX	"lld"
+#  else
+#    define PRIdMAX	"ld"
+#  endif
+#endif
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+#define PC(c) \
+  do { \
+    char b[2]; \
+    tw++; \
+    b[0] = c; b[1] = '\0'; \
+    if (vflag) \
+      vbadd (b, 1); \
+    else \
+      putchar (c); \
+    QUIT; \
+  } while (0)
+
+#define PF(f, func) \
+  do { \
+    int nw; \
+    clearerr (stdout); \
+    if (have_fieldwidth && have_precision) \
+      nw = vflag ? vbprintf (f, fieldwidth, precision, func) : printf (f, fieldwidth, precision, func); \
+    else if (have_fieldwidth) \
+      nw = vflag ? vbprintf (f, fieldwidth, func) : printf (f, fieldwidth, func); \
+    else if (have_precision) \
+      nw = vflag ? vbprintf (f, precision, func) : printf (f, precision, func); \
+    else \
+      nw = vflag ? vbprintf (f, func) : printf (f, func); \
+    tw += nw; \
+    QUIT; \
+    if (ferror (stdout)) \
+      { \
+	sh_wrerror (); \
+	clearerr (stdout); \
+	return (EXECUTION_FAILURE); \
+      } \
+  } while (0)
+
+/* We free the buffer used by mklong() if it's `too big'. */
+#define PRETURN(value) \
+  do \
+    { \
+      QUIT; \
+      if (vflag) \
+	{ \
+	  SHELL_VAR *v; \
+	  v = builtin_bind_variable  (vname, vbuf, 0); \
+	  stupidly_hack_special_variables (vname); \
+	  if (v == 0 || readonly_p (v) || noassign_p (v)) \
+	    return (EXECUTION_FAILURE); \
+	} \
+      if (conv_bufsize > 4096 ) \
+	{ \
+	  free (conv_buf); \
+	  conv_bufsize = 0; \
+	  conv_buf = 0; \
+	} \
+      if (vbsize > 4096) \
+	{ \
+	  free (vbuf); \
+	  vbsize = 0; \
+	  vbuf = 0; \
+	} \
+      else if (vbuf) \
+	vbuf[0] = 0; \
+      if (ferror (stdout) == 0) \
+	fflush (stdout); \
+      QUIT; \
+      if (ferror (stdout)) \
+	{ \
+	  sh_wrerror (); \
+	  clearerr (stdout); \
+	  return (EXECUTION_FAILURE); \
+	} \
+      return (value); \
+    } \
+  while (0)
+
+#define SKIP1 "#'-+ 0"
+#define LENMODS "hjlLtz"
+
+extern time_t shell_start_time;
+
+#if !HAVE_ASPRINTF
+extern int asprintf PARAMS((char **, const char *, ...)) __attribute__((__format__ (printf, 2, 3)));
+#endif
+
+#if !HAVE_VSNPRINTF
+extern int vsnprintf PARAMS((char *, size_t, const char *, va_list)) __attribute__((__format__ (printf, 3, 0)));
+#endif
+
+static void printf_erange PARAMS((char *));
+static int printstr PARAMS((char *, char *, int, int, int));
+static int tescape PARAMS((char *, char *, int *, int *));
+static char *bexpand PARAMS((char *, int, int *, int *));
+static char *vbadd PARAMS((char *, int));
+static int vbprintf PARAMS((const char *, ...)) __attribute__((__format__ (printf, 1, 2)));
+static char *mklong PARAMS((char *, char *, size_t));
+static int getchr PARAMS((void));
+static char *getstr PARAMS((void));
+static int  getint PARAMS((void));
+static intmax_t getintmax PARAMS((void));
+static uintmax_t getuintmax PARAMS((void));
+
+#if defined (HAVE_LONG_DOUBLE) && HAVE_DECL_STRTOLD && !defined(STRTOLD_BROKEN)
+typedef long double floatmax_t;
+#  define FLOATMAX_CONV	"L"
+#  define strtofltmax	strtold
+#else
+typedef double floatmax_t;
+#  define FLOATMAX_CONV	""
+#  define strtofltmax	strtod
+#endif
+static floatmax_t getfloatmax PARAMS((void));
+
+static intmax_t asciicode PARAMS((void));
+
+static WORD_LIST *garglist, *orig_arglist;
+static int retval;
+static int conversion_error;
+
+/* printf -v var support */
+static int vflag = 0;
+static char *vbuf, *vname;
+static size_t vbsize;
+static int vblen;
+
+static intmax_t tw;
+
+static char *conv_buf;
+static size_t conv_bufsize;
+
+int
+printf_builtin (list)
+     WORD_LIST *list;
+{
+  int ch, fieldwidth, precision;
+  int have_fieldwidth, have_precision;
+  char convch, thisch, nextch, *format, *modstart, *fmt, *start;
+#if defined (HANDLE_MULTIBYTE)
+  char mbch[25];		/* 25 > MB_LEN_MAX, plus can handle 4-byte UTF-8 and large Unicode characters*/
+  int mbind, mblen;
+#endif
+#if defined (ARRAY_VARS)
+  int arrayflags;
+#endif
+
+  conversion_error = 0;
+  retval = EXECUTION_SUCCESS;
+
+  vflag = 0;
+
+  reset_internal_getopt ();
+  while ((ch = internal_getopt (list, "v:")) != -1)
+    {
+      switch (ch)
+	{
+	case 'v':
+	  vname = list_optarg;
+#if defined (ARRAY_VARS)
+	  arrayflags = assoc_expand_once ? (VA_NOEXPAND|VA_ONEWORD) : 0;
+	  if (legal_identifier (vname) || valid_array_reference (vname, arrayflags))
+#else
+	  if (legal_identifier (vname))
+#endif
+	    {
+	      vflag = 1;
+	      if (vbsize == 0)
+		vbuf = xmalloc (vbsize = 16);
+	      vblen = 0;
+	      if (vbuf)
+		vbuf[0] = 0;
+	    }
+	  else
+	    {
+	      sh_invalidid (vname);
+	      return (EX_USAGE);
+	    }
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;	/* skip over possible `--' */
+
+  if (list == 0)
+    {
+      builtin_usage ();
+      return (EX_USAGE);
+    }
+
+  /* Allow printf -v var "" to act like var="" */
+  if (vflag && list->word->word && list->word->word[0] == '\0')
+    {
+      SHELL_VAR *v;
+      v = builtin_bind_variable (vname, "", 0);
+      stupidly_hack_special_variables (vname);
+      return ((v == 0 || readonly_p (v) || noassign_p (v)) ? EXECUTION_FAILURE : EXECUTION_SUCCESS);
+    }
+
+  if (list->word->word == 0 || list->word->word[0] == '\0')
+    return (EXECUTION_SUCCESS);
+
+  format = list->word->word;
+  tw = 0;
+
+  garglist = orig_arglist = list->next;
+
+  /* If the format string is empty after preprocessing, return immediately. */
+  if (format == 0 || *format == 0)
+    return (EXECUTION_SUCCESS);
+
+  /* Basic algorithm is to scan the format string for conversion
+     specifications -- once one is found, find out if the field
+     width or precision is a '*'; if it is, gather up value.  Note,
+     format strings are reused as necessary to use up the provided
+     arguments, arguments of zero/null string are provided to use
+     up the format string. */
+  do
+    {
+      tw = 0;
+      /* find next format specification */
+      for (fmt = format; *fmt; fmt++)
+	{
+	  precision = fieldwidth = 0;
+	  have_fieldwidth = have_precision = 0;
+
+	  if (*fmt == '\\')
+	    {
+	      fmt++;
+	      /* A NULL third argument to tescape means to bypass the
+		 special processing for arguments to %b. */
+#if defined (HANDLE_MULTIBYTE)
+	      /* Accommodate possible use of \u or \U, which can result in
+		 multibyte characters */
+	      memset (mbch, '\0', sizeof (mbch));
+	      fmt += tescape (fmt, mbch, &mblen, (int *)NULL);
+	      for (mbind = 0; mbind < mblen; mbind++)
+	        PC (mbch[mbind]);
+#else
+	      fmt += tescape (fmt, &nextch, (int *)NULL, (int *)NULL);
+	      PC (nextch);
+#endif
+	      fmt--;	/* for loop will increment it for us again */
+	      continue;
+	    }
+
+	  if (*fmt != '%')
+	    {
+	      PC (*fmt);
+	      continue;
+	    }
+
+	  /* ASSERT(*fmt == '%') */
+	  start = fmt++;
+
+	  if (*fmt == '%')		/* %% prints a % */
+	    {
+	      PC ('%');
+	      continue;
+	    }
+
+	  /* found format specification, skip to field width */
+	  for (; *fmt && strchr(SKIP1, *fmt); ++fmt)
+	    ;
+
+	  /* Skip optional field width. */
+	  if (*fmt == '*')
+	    {
+	      fmt++;
+	      have_fieldwidth = 1;
+	      fieldwidth = getint ();
+	    }
+	  else
+	    while (DIGIT (*fmt))
+	      fmt++;
+
+	  /* Skip optional '.' and precision */
+	  if (*fmt == '.')
+	    {
+	      ++fmt;
+	      if (*fmt == '*')
+		{
+		  fmt++;
+		  have_precision = 1;
+		  precision = getint ();
+		}
+	      else
+		{
+		  /* Negative precisions are allowed but treated as if the
+		     precision were missing; I would like to allow a leading
+		     `+' in the precision number as an extension, but lots
+		     of asprintf/fprintf implementations get this wrong. */
+#if 0
+		  if (*fmt == '-' || *fmt == '+')
+#else
+		  if (*fmt == '-')
+#endif
+		    fmt++;
+		  while (DIGIT (*fmt))
+		    fmt++;
+		}
+	    }
+
+	  /* skip possible format modifiers */
+	  modstart = fmt;
+	  while (*fmt && strchr (LENMODS, *fmt))
+	    fmt++;
+	    
+	  if (*fmt == 0)
+	    {
+	      builtin_error (_("`%s': missing format character"), start);
+	      PRETURN (EXECUTION_FAILURE);
+	    }
+
+	  convch = *fmt;
+	  thisch = modstart[0];
+	  nextch = modstart[1];
+	  modstart[0] = convch;
+	  modstart[1] = '\0';
+
+	  QUIT;
+	  switch(convch)
+	    {
+	    case 'c':
+	      {
+		char p;
+
+		p = getchr ();
+		PF(start, p);
+		break;
+	      }
+
+	    case 's':
+	      {
+		char *p;
+
+		p = getstr ();
+		PF(start, p);
+		break;
+	      }
+
+	    case '(':
+	      {
+		char *timefmt, timebuf[128], *t;
+		int n;
+		intmax_t arg;
+		time_t secs;
+		struct tm *tm;
+
+		modstart[1] = nextch;	/* restore char after left paren */
+		timefmt = xmalloc (strlen (fmt) + 3);
+		fmt++;	/* skip over left paren */
+		for (t = timefmt, n = 1; *fmt; )
+		  {
+		    if (*fmt == '(')
+		      n++;
+		    else if (*fmt == ')')
+		      n--;
+		    if (n == 0)
+		      break;
+		    *t++ = *fmt++;
+		  }
+		*t = '\0';
+		if (*++fmt != 'T')
+		  {
+		    builtin_warning (_("`%c': invalid time format specification"), *fmt);
+		    fmt = start;
+		    free (timefmt);
+		    PC (*fmt);
+		    continue;
+		  }
+		if (timefmt[0] == '\0')
+		  {
+		    timefmt[0] = '%';
+		    timefmt[1] = 'X';	/* locale-specific current time - should we use `+'? */
+		    timefmt[2] = '\0';
+		  }
+		/* argument is seconds since the epoch with special -1 and -2 */
+		/* default argument is equivalent to -1; special case */
+		arg = garglist ? getintmax () : -1;
+		if (arg == -1)
+		  secs = NOW;		/* roughly date +%s */
+		else if (arg == -2)
+		  secs = shell_start_time;	/* roughly $SECONDS */
+		else
+		  secs = arg;
+#if defined (HAVE_TZSET)
+		sv_tz ("TZ");		/* XXX -- just make sure */
+#endif
+		tm = localtime (&secs);
+		if (tm == 0)
+		  {
+		    secs = 0;
+		    tm = localtime (&secs);
+		  }
+		n = tm ? strftime (timebuf, sizeof (timebuf), timefmt, tm) : 0;
+		free (timefmt);
+		if (n == 0)
+		  timebuf[0] = '\0';
+		else
+		  timebuf[sizeof(timebuf) - 1] = '\0';
+		/* convert to %s format that preserves fieldwidth and precision */
+		modstart[0] = 's';
+		modstart[1] = '\0';
+		n = printstr (start, timebuf, strlen (timebuf), fieldwidth, precision);	/* XXX - %s for now */
+		if (n < 0)
+		  {
+		    if (ferror (stdout) == 0)
+		      {
+			sh_wrerror ();
+			clearerr (stdout);
+		      }
+		    PRETURN (EXECUTION_FAILURE);
+		  }
+		break;
+	      }
+
+	    case 'n':
+	      {
+		char *var;
+
+		var = getstr ();
+		if (var && *var)
+		  {
+		    if (legal_identifier (var))
+		      bind_var_to_int (var, tw);
+		    else
+		      {
+			sh_invalidid (var);
+			PRETURN (EXECUTION_FAILURE);
+		      }
+		  }
+		break;
+	      }
+
+	    case 'b':		/* expand escapes in argument */
+	      {
+		char *p, *xp;
+		int rlen, r;
+
+		p = getstr ();
+		ch = rlen = r = 0;
+		xp = bexpand (p, strlen (p), &ch, &rlen);
+
+		if (xp)
+		  {
+		    /* Have to use printstr because of possible NUL bytes
+		       in XP -- printf does not handle that well. */
+		    r = printstr (start, xp, rlen, fieldwidth, precision);
+		    if (r < 0)
+		      {
+			if (ferror (stdout) == 0)
+			  {
+		            sh_wrerror ();
+			    clearerr (stdout);
+			  }
+		        retval = EXECUTION_FAILURE;
+		      }
+		    free (xp);
+		  }
+
+		if (ch || r < 0)
+		  PRETURN (retval);
+		break;
+	      }
+
+	    case 'q':		/* print with shell quoting */
+	      {
+		char *p, *xp;
+		int r;
+
+		r = 0;
+		p = getstr ();
+		if (p && *p == 0)	/* XXX - getstr never returns null */
+		  xp = savestring ("''");
+		else if (ansic_shouldquote (p))
+		  xp = ansic_quote (p, 0, (int *)0);
+		else
+		  xp = sh_backslash_quote (p, 0, 3);
+		if (xp)
+		  {
+		    /* Use printstr to get fieldwidth and precision right. */
+		    r = printstr (start, xp, strlen (xp), fieldwidth, precision);
+		    if (r < 0)
+		      {
+			sh_wrerror ();
+			clearerr (stdout);
+		      }
+		    free (xp);
+		  }
+
+		if (r < 0)
+		  PRETURN (EXECUTION_FAILURE);
+		break;
+	      }
+
+	    case 'd':
+	    case 'i':
+	      {
+		char *f;
+		long p;
+		intmax_t pp;
+
+		p = pp = getintmax ();
+		if (p != pp)
+		  {
+		    f = mklong (start, PRIdMAX, sizeof (PRIdMAX) - 2);
+		    PF (f, pp);
+		  }
+		else
+		  {
+		    /* Optimize the common case where the integer fits
+		       in "long".  This also works around some long
+		       long and/or intmax_t library bugs in the common
+		       case, e.g. glibc 2.2 x86.  */
+		    f = mklong (start, "l", 1);
+		    PF (f, p);
+		  }
+		break;
+	      }
+
+	    case 'o':
+	    case 'u':
+	    case 'x':
+	    case 'X':
+	      {
+		char *f;
+		unsigned long p;
+		uintmax_t pp;
+
+		p = pp = getuintmax ();
+		if (p != pp)
+		  {
+		    f = mklong (start, PRIdMAX, sizeof (PRIdMAX) - 2);
+		    PF (f, pp);
+		  }
+		else
+		  {
+		    f = mklong (start, "l", 1);
+		    PF (f, p);
+		  }
+		break;
+	      }
+
+	    case 'e':
+	    case 'E':
+	    case 'f':
+	    case 'F':
+	    case 'g':
+	    case 'G':
+#if defined (HAVE_PRINTF_A_FORMAT)
+	    case 'a':
+	    case 'A':
+#endif
+	      {
+		char *f;
+		floatmax_t p;
+
+		p = getfloatmax ();
+		f = mklong (start, FLOATMAX_CONV, sizeof(FLOATMAX_CONV) - 1);
+		PF (f, p);
+		break;
+	      }
+
+	    /* We don't output unrecognized format characters; we print an
+	       error message and return a failure exit status. */
+	    default:
+	      builtin_error (_("`%c': invalid format character"), convch);
+	      PRETURN (EXECUTION_FAILURE);
+	    }
+
+	  modstart[0] = thisch;
+	  modstart[1] = nextch;
+	}
+
+      if (ferror (stdout))
+	{
+	  /* PRETURN will print error message. */
+	  PRETURN (EXECUTION_FAILURE);
+	}
+    }
+  while (garglist && garglist != list->next);
+
+  if (conversion_error)
+    retval = EXECUTION_FAILURE;
+
+  PRETURN (retval);
+}
+
+static void
+printf_erange (s)
+     char *s;
+{
+  builtin_error (_("warning: %s: %s"), s, strerror(ERANGE));
+}
+
+/* We duplicate a lot of what printf(3) does here. */
+static int
+printstr (fmt, string, len, fieldwidth, precision)
+     char *fmt;			/* format */
+     char *string;		/* expanded string argument */
+     int len;			/* length of expanded string */
+     int fieldwidth;		/* argument for width of `*' */
+     int precision;		/* argument for precision of `*' */
+{
+#if 0
+  char *s;
+#endif
+  int padlen, nc, ljust, i;
+  int fw, pr;			/* fieldwidth and precision */
+  intmax_t mfw, mpr;
+
+  if (string == 0)
+    string = "";
+
+#if 0
+  s = fmt;
+#endif
+  if (*fmt == '%')
+    fmt++;
+
+  ljust = fw = 0;
+  pr = -1;
+  mfw = 0;
+  mpr = -1;
+
+  /* skip flags */
+  while (strchr (SKIP1, *fmt))
+    {
+      if (*fmt == '-')
+	ljust = 1;
+      fmt++;
+    }
+
+  /* get fieldwidth, if present.  rely on caller to clamp fieldwidth at INT_MAX */
+  if (*fmt == '*')
+    {
+      fmt++;
+      fw = fieldwidth;
+      if (fw < 0)
+	{
+	  fw = -fw;
+	  ljust = 1;
+	}
+    }
+  else if (DIGIT (*fmt))
+    {
+      mfw = *fmt++ - '0';
+      while (DIGIT (*fmt))
+	mfw = (mfw * 10) + (*fmt++ - '0');
+      /* Error if fieldwidth > INT_MAX here? */
+      fw = (mfw < 0 || mfw > INT_MAX) ? INT_MAX : mfw;
+    }
+
+  /* get precision, if present */
+  if (*fmt == '.')
+    {
+      fmt++;
+      if (*fmt == '*')
+	{
+	  fmt++;
+	  pr = precision;
+	}
+      else if (DIGIT (*fmt))
+	{
+	  mpr = *fmt++ - '0';
+	  while (DIGIT (*fmt))
+	    mpr = (mpr * 10) + (*fmt++ - '0');
+	  /* Error if precision > INT_MAX here? */
+	  pr = (mpr < 0 || mpr > INT_MAX) ? INT_MAX : mpr;
+	}
+      else
+	pr = 0;		/* "a null digit string is treated as zero" */
+    }
+
+#if 0
+  /* If we remove this, get rid of `s'. */
+  if (*fmt != 'b' && *fmt != 'q')
+    {
+      internal_error (_("format parsing problem: %s"), s);
+      fw = pr = 0;
+    }
+#endif
+
+  /* chars from string to print */
+  nc = (pr >= 0 && pr <= len) ? pr : len;
+
+  padlen = fw - nc;
+  if (padlen < 0)
+    padlen = 0;
+  if (ljust)
+    padlen = -padlen;
+
+  /* leading pad characters */
+  for (; padlen > 0; padlen--)
+    PC (' ');
+
+  /* output NC characters from STRING */
+  for (i = 0; i < nc; i++)
+    PC (string[i]);
+
+  /* output any necessary trailing padding */
+  for (; padlen < 0; padlen++)
+    PC (' ');
+
+  return (ferror (stdout) ? -1 : 0);
+}
+  
+/* Convert STRING by expanding the escape sequences specified by the
+   POSIX standard for printf's `%b' format string.  If SAWC is non-null,
+   perform the processing appropriate for %b arguments.  In particular,
+   recognize `\c' and use that as a string terminator.  If we see \c, set
+   *SAWC to 1 before returning.  LEN is the length of STRING. */
+
+/* Translate a single backslash-escape sequence starting at ESTART (the
+   character after the backslash) and return the number of characters
+   consumed by the sequence.  CP is the place to return the translated
+   value.  *SAWC is set to 1 if the escape sequence was \c, since that means
+   to short-circuit the rest of the processing.  If SAWC is null, we don't
+   do the \c short-circuiting, and \c is treated as an unrecognized escape
+   sequence; we also bypass the other processing specific to %b arguments.  */
+static int
+tescape (estart, cp, lenp, sawc)
+     char *estart;
+     char *cp;
+     int *lenp, *sawc;
+{
+  register char *p;
+  int temp, c, evalue;
+  unsigned long uvalue;
+
+  p = estart;
+  if (lenp)
+    *lenp = 1;
+
+  switch (c = *p++)
+    {
+#if defined (__STDC__)
+      case 'a': *cp = '\a'; break;
+#else
+      case 'a': *cp = '\007'; break;
+#endif
+
+      case 'b': *cp = '\b'; break;
+
+      case 'e':
+      case 'E': *cp = '\033'; break;	/* ESC -- non-ANSI */
+
+      case 'f': *cp = '\f'; break;
+
+      case 'n': *cp = '\n'; break;
+
+      case 'r': *cp = '\r'; break;
+
+      case 't': *cp = '\t'; break;
+
+      case 'v': *cp = '\v'; break;
+
+      /* The octal escape sequences are `\0' followed by up to three octal
+	 digits (if SAWC), or `\' followed by up to three octal digits (if
+	 !SAWC).  As an extension, we allow the latter form even if SAWC. */
+      case '0': case '1': case '2': case '3':
+      case '4': case '5': case '6': case '7':
+	evalue = OCTVALUE (c);
+	for (temp = 2 + (!evalue && !!sawc); ISOCTAL (*p) && temp--; p++)
+	  evalue = (evalue * 8) + OCTVALUE (*p);
+	*cp = evalue & 0xFF;
+	break;
+
+      /* And, as another extension, we allow \xNN, where each N is a
+	 hex digit. */
+      case 'x':
+	for (temp = 2, evalue = 0; ISXDIGIT ((unsigned char)*p) && temp--; p++)
+	  evalue = (evalue * 16) + HEXVALUE (*p);
+	if (p == estart + 1)
+	  {
+	    builtin_error (_("missing hex digit for \\x"));
+	    *cp = '\\';
+	    return 0;
+	  }
+	*cp = evalue & 0xFF;
+	break;
+
+#if defined (HANDLE_MULTIBYTE)
+      case 'u':
+      case 'U':
+	temp = (c == 'u') ? 4 : 8;	/* \uNNNN \UNNNNNNNN */
+	for (uvalue = 0; ISXDIGIT ((unsigned char)*p) && temp--; p++)
+	  uvalue = (uvalue * 16) + HEXVALUE (*p);
+	if (p == estart + 1)
+	  {
+	    builtin_error (_("missing unicode digit for \\%c"), c);
+	    *cp = '\\';
+	    return 0;
+	  }
+	if (uvalue <= 0x7f)		/* <= 0x7f translates directly */
+	  *cp = uvalue;
+	else
+	  {
+	    temp = u32cconv (uvalue, cp);
+	    cp[temp] = '\0';
+	    if (lenp)
+	      *lenp = temp;
+	  }
+	break;
+#endif
+	
+      case '\\':	/* \\ -> \ */
+	*cp = c;
+	break;
+
+      /* SAWC == 0 means that \', \", and \? are recognized as escape
+	 sequences, though the only processing performed is backslash
+	 removal. */
+      case '\'': case '"': case '?':
+	if (!sawc)
+	  *cp = c;
+	else
+	  {
+	    *cp = '\\';
+	    return 0;
+	  }
+	break;
+
+      case 'c':
+	if (sawc)
+	  {
+	    *sawc = 1;
+	    break;
+	  }
+      /* other backslash escapes are passed through unaltered */
+      default:
+	*cp = '\\';
+	return 0;
+      }
+  return (p - estart);
+}
+
+static char *
+bexpand (string, len, sawc, lenp)
+     char *string;
+     int len, *sawc, *lenp;
+{
+  int temp;
+  char *ret, *r, *s, c;
+#if defined (HANDLE_MULTIBYTE)
+  char mbch[25];
+  int mbind, mblen;
+#endif
+
+  if (string == 0 || len == 0)
+    {
+      if (sawc)
+	*sawc = 0;
+      if (lenp)
+	*lenp = 0;
+      ret = (char *)xmalloc (1);
+      ret[0] = '\0';
+      return (ret);
+    }
+
+  ret = (char *)xmalloc (len + 1);
+  for (r = ret, s = string; s && *s; )
+    {
+      c = *s++;
+      if (c != '\\' || *s == '\0')
+	{
+	  *r++ = c;
+	  continue;
+	}
+      temp = 0;
+#if defined (HANDLE_MULTIBYTE)
+      memset (mbch, '\0', sizeof (mbch));
+      s += tescape (s, mbch, &mblen, &temp);
+#else
+      s += tescape (s, &c, (int *)NULL, &temp);
+#endif
+      if (temp)
+	{
+	  if (sawc)
+	    *sawc = 1;
+	  break;
+	}
+
+#if defined (HANDLE_MULTIBYTE)
+      for (mbind = 0; mbind < mblen; mbind++)
+	*r++ = mbch[mbind];
+#else
+      *r++ = c;
+#endif      
+    }
+
+  *r = '\0';
+  if (lenp)
+    *lenp = r - ret;
+  return ret;
+}
+
+static char *
+vbadd (buf, blen)
+     char *buf;
+     int blen;
+{
+  size_t nlen;
+
+  nlen = vblen + blen + 1;
+  if (nlen >= vbsize)
+    {
+      vbsize = ((nlen + 63) >> 6) << 6;
+      vbuf = (char *)xrealloc (vbuf, vbsize);
+    }
+
+  if (blen == 1)
+    vbuf[vblen++] = buf[0];
+  else if (blen > 1)
+    {
+      FASTCOPY (buf, vbuf  + vblen, blen);
+      vblen += blen;
+    }
+  vbuf[vblen] = '\0';
+
+#ifdef DEBUG
+  if  (strlen (vbuf) != vblen)
+    internal_error  ("printf:vbadd: vblen (%d) != strlen (vbuf) (%d)", vblen, (int)strlen (vbuf));
+#endif
+
+  return vbuf;
+}
+
+static int
+#if defined (PREFER_STDARG)
+vbprintf (const char *format, ...)
+#else
+vbprintf (format, va_alist)
+  const char *format;
+  va_dcl
+#endif
+{
+  va_list args;
+  size_t nlen;
+  int blen;
+
+  SH_VA_START (args, format);
+  blen = vsnprintf (vbuf + vblen, vbsize - vblen, format, args);
+  va_end (args);
+
+  nlen = vblen + blen + 1;
+  if (nlen >= vbsize)
+    {
+      vbsize = ((nlen + 63) >> 6) << 6;
+      vbuf = (char *)xrealloc (vbuf, vbsize);
+      SH_VA_START (args, format);
+      blen = vsnprintf (vbuf + vblen, vbsize - vblen, format, args);
+      va_end (args);
+    }
+
+  vblen += blen;
+  vbuf[vblen] = '\0';
+
+#ifdef DEBUG
+  if  (strlen (vbuf) != vblen)
+    internal_error  ("printf:vbprintf: vblen (%d) != strlen (vbuf) (%d)", vblen, (int)strlen (vbuf));
+#endif
+  
+  return (blen);
+}
+
+static char *
+mklong (str, modifiers, mlen)
+     char *str;
+     char *modifiers;
+     size_t mlen;
+{
+  size_t len, slen;
+
+  slen = strlen (str);
+  len = slen + mlen + 1;
+
+  if (len > conv_bufsize)
+    {
+      conv_bufsize = (((len + 1023) >> 10) << 10);
+      conv_buf = (char *)xrealloc (conv_buf, conv_bufsize);
+    }
+
+  FASTCOPY (str, conv_buf, slen - 1);
+  FASTCOPY (modifiers, conv_buf + slen - 1, mlen);
+
+  conv_buf[len - 2] = str[slen - 1];
+  conv_buf[len - 1] = '\0';
+  return (conv_buf);
+}
+
+static int
+getchr ()
+{
+  int ret;
+
+  if (garglist == 0)
+    return ('\0');
+
+  ret = (int)garglist->word->word[0];
+  garglist = garglist->next;
+  return ret;
+}
+
+static char *
+getstr ()
+{
+  char *ret;
+
+  if (garglist == 0)
+    return ("");
+
+  ret = garglist->word->word;
+  garglist = garglist->next;
+  return ret;
+}
+
+static int
+getint ()
+{
+  intmax_t ret;
+
+  ret = getintmax ();
+
+  if (garglist == 0)
+    return ret;
+
+  if (ret > INT_MAX)
+    {
+      printf_erange (garglist->word->word);
+      ret = INT_MAX;
+    }
+  else if (ret < INT_MIN)
+    {
+      printf_erange (garglist->word->word);
+      ret = INT_MIN;
+    }
+
+  return ((int)ret);
+}
+
+static intmax_t
+getintmax ()
+{
+  intmax_t ret;
+  char *ep;
+
+  if (garglist == 0)
+    return (0);
+
+  if (garglist->word->word[0] == '\'' || garglist->word->word[0] == '"')
+    return asciicode ();
+
+  errno = 0;
+  ret = strtoimax (garglist->word->word, &ep, 0);
+
+  if (*ep)
+    {
+      sh_invalidnum (garglist->word->word);
+      /* POSIX.2 says ``...a diagnostic message shall be written to standard
+	 error, and the utility shall not exit with a zero exit status, but
+	 shall continue processing any remaining operands and shall write the
+         value accumulated at the time the error was detected to standard
+	 output.''  Yecch. */
+#if 0
+      ret = 0;		/* return partially-converted value from strtoimax */
+#endif
+      conversion_error = 1;
+    }
+  else if (errno == ERANGE)
+    printf_erange (garglist->word->word);
+
+  garglist = garglist->next;
+  return (ret);
+}
+
+static uintmax_t
+getuintmax ()
+{
+  uintmax_t ret;
+  char *ep;
+
+  if (garglist == 0)
+    return (0);
+
+  if (garglist->word->word[0] == '\'' || garglist->word->word[0] == '"')
+    return asciicode ();
+
+  errno = 0;
+  ret = strtoumax (garglist->word->word, &ep, 0);
+  
+  if (*ep)
+    {
+      sh_invalidnum (garglist->word->word);
+#if 0
+      /* Same POSIX.2 conversion error requirements as getintmax(). */
+      ret = 0;
+#endif
+      conversion_error = 1;
+    }
+  else if (errno == ERANGE)
+    printf_erange (garglist->word->word);
+
+  garglist = garglist->next;
+  return (ret);
+}
+
+static floatmax_t
+getfloatmax ()
+{
+  floatmax_t ret;
+  char *ep;
+
+  if (garglist == 0)
+    return (0);
+
+  if (garglist->word->word[0] == '\'' || garglist->word->word[0] == '"')
+    return asciicode ();
+
+  errno = 0;
+  ret = strtofltmax (garglist->word->word, &ep);
+
+  if (*ep)
+    {
+      sh_invalidnum (garglist->word->word);
+#if 0
+      /* Same thing about POSIX.2 conversion error requirements. */
+      ret = 0;
+#endif
+      conversion_error = 1;
+    }
+  else if (errno == ERANGE)
+    printf_erange (garglist->word->word);
+
+  garglist = garglist->next;
+  return (ret);
+}
+
+/* NO check is needed for garglist here. */
+static intmax_t
+asciicode ()
+{
+  register intmax_t ch;
+#if defined (HANDLE_MULTIBYTE)
+  wchar_t wc;
+  size_t slen;
+  int mblength;
+#endif
+  DECLARE_MBSTATE;
+
+#if defined (HANDLE_MULTIBYTE)
+  slen = strlen (garglist->word->word+1);
+  wc = 0;
+  mblength = mbtowc (&wc, garglist->word->word+1, slen);
+  if (mblength > 0)
+    ch = wc;		/* XXX */
+  else
+#endif
+    ch = (unsigned char)garglist->word->word[1];
+
+  garglist = garglist->next;
+  return (ch);
+}
diff --git a/builtins/psize.c b/builtins/psize.c
new file mode 100644
index 0000000..30881fb
--- /dev/null
+++ b/builtins/psize.c
@@ -0,0 +1,79 @@
+/* psize.c - Find pipe size. */
+
+/* Copyright (C) 1987, 1991 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*  Write output in 128-byte chunks until we get a sigpipe or write gets an
+    EPIPE.  Then report how many bytes we wrote.  We assume that this is the
+    pipe size. */
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+#ifndef _MINIX
+#include "../bashtypes.h"
+#endif
+#include <signal.h>
+#include <errno.h>
+
+#include "../command.h"
+#include "../general.h"
+#include "../sig.h"
+
+#ifndef errno
+extern int errno;
+#endif
+
+int nw;
+
+sighandler
+sigpipe (sig)
+     int sig;
+{
+  fprintf (stderr, "%d\n", nw);
+  exit (0);
+}
+
+int
+main (argc, argv)
+     int argc;
+     char **argv;
+{
+  char buf[128];
+  register int i;
+
+  for (i = 0; i < 128; i++)
+    buf[i] = ' ';
+
+  signal (SIGPIPE, sigpipe);
+
+  nw = 0;
+  for (;;)
+    {
+      int n;
+      n = write (1, buf, 128);
+      nw += n;
+    }
+  return (0);
+}
diff --git a/builtins/psize.sh b/builtins/psize.sh
new file mode 100644
index 0000000..29bc115
--- /dev/null
+++ b/builtins/psize.sh
@@ -0,0 +1,45 @@
+#! /bin/sh
+#
+# psize.sh -- determine this system's pipe size, and write a define to
+#             pipesize.h so ulimit.c can use it.
+
+: ${TMPDIR:=/tmp}
+# try to use mktemp(1) if the system supports it
+{ TMPFILE="`mktemp $TMPDIR/pipsize.XXXXXX 2>/dev/null`"; } 2>/dev/null
+used_mktemp=true
+
+if [ -z "$TMPFILE" ]; then
+	TMPNAME=pipsize.$$
+	TMPFILE=$TMPDIR/$TMPNAME
+	used_mktemp=false
+fi
+
+trap 'rm -f "$TMPFILE" ; exit 1' 1 2 3 6 15
+trap 'rm -f "$TMPFILE"' 0
+
+echo "/*"
+echo " * pipesize.h"
+echo " *"
+echo " * This file is automatically generated by psize.sh"
+echo " * Do not edit!"
+echo " */"
+echo ""
+
+#
+# Try to avoid tempfile races.  We can't really check for the file's
+# existence before we run psize.aux, because `test -e' is not portable,
+# `test -h' (test for symlinks) is not portable, and `test -f' only
+# checks for regular files.  If we used mktemp(1), we're ahead of the
+# game.
+#
+$used_mktemp || rm -f "$TMPFILE"
+
+./psize.aux 2>"$TMPFILE" | sleep 3
+
+if [ -s "$TMPFILE" ]; then
+	echo "#define PIPESIZE `cat "$TMPFILE"`"
+else
+	echo "#define PIPESIZE 512"
+fi
+
+exit 0
diff --git a/builtins/pushd.def b/builtins/pushd.def
new file mode 100644
index 0000000..829f827
--- /dev/null
+++ b/builtins/pushd.def
@@ -0,0 +1,796 @@
+This file is pushd.def, from which is created pushd.c.  It implements the
+builtins "pushd", "popd", and "dirs" in Bash.
+
+Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES pushd.c
+
+$BUILTIN pushd
+$FUNCTION pushd_builtin
+$DEPENDS_ON PUSHD_AND_POPD
+$SHORT_DOC pushd [-n] [+N | -N | dir]
+Add directories to stack.
+
+Adds a directory to the top of the directory stack, or rotates
+the stack, making the new top of the stack the current working
+directory.  With no arguments, exchanges the top two directories.
+
+Options:
+  -n	Suppresses the normal change of directory when adding
+		directories to the stack, so only the stack is manipulated.
+
+Arguments:
+  +N	Rotates the stack so that the Nth directory (counting
+		from the left of the list shown by `dirs', starting with
+		zero) is at the top.
+
+  -N	Rotates the stack so that the Nth directory (counting
+		from the right of the list shown by `dirs', starting with
+		zero) is at the top.
+
+  dir	Adds DIR to the directory stack at the top, making it the
+		new current working directory.
+
+The `dirs' builtin displays the directory stack.
+
+Exit Status:
+Returns success unless an invalid argument is supplied or the directory
+change fails.
+$END
+
+$BUILTIN popd
+$FUNCTION popd_builtin
+$DEPENDS_ON PUSHD_AND_POPD
+$SHORT_DOC popd [-n] [+N | -N]
+Remove directories from stack.
+
+Removes entries from the directory stack.  With no arguments, removes
+the top directory from the stack, and changes to the new top directory.
+
+Options:
+  -n	Suppresses the normal change of directory when removing
+		directories from the stack, so only the stack is manipulated.
+
+Arguments:
+  +N	Removes the Nth entry counting from the left of the list
+		shown by `dirs', starting with zero.  For example: `popd +0'
+		removes the first directory, `popd +1' the second.
+
+  -N	Removes the Nth entry counting from the right of the list
+		shown by `dirs', starting with zero.  For example: `popd -0'
+		removes the last directory, `popd -1' the next to last.
+
+The `dirs' builtin displays the directory stack.
+
+Exit Status:
+Returns success unless an invalid argument is supplied or the directory
+change fails.
+$END
+
+$BUILTIN dirs
+$FUNCTION dirs_builtin
+$DEPENDS_ON PUSHD_AND_POPD
+$SHORT_DOC dirs [-clpv] [+N] [-N]
+Display directory stack.
+
+Display the list of currently remembered directories.  Directories
+find their way onto the list with the `pushd' command; you can get
+back up through the list with the `popd' command.
+
+Options:
+  -c	clear the directory stack by deleting all of the elements
+  -l	do not print tilde-prefixed versions of directories relative
+		to your home directory
+  -p	print the directory stack with one entry per line
+  -v	print the directory stack with one entry per line prefixed
+		with its position in the stack
+
+Arguments:
+  +N	Displays the Nth entry counting from the left of the list
+		shown by dirs when invoked without options, starting with
+		zero.
+
+  -N	Displays the Nth entry counting from the right of the list
+		shown by dirs when invoked without options, starting with
+		zero.
+
+Exit Status:
+Returns success unless an invalid option is supplied or an error occurs.
+$END
+
+#include <config.h>
+
+#if defined (PUSHD_AND_POPD)
+#include <stdio.h>
+#if defined (HAVE_SYS_PARAM_H)
+#  include <sys/param.h>
+#endif
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include "../bashansi.h"
+#include "../bashintl.h"
+
+#include <errno.h>
+
+#include <tilde/tilde.h>
+
+#include "../shell.h"
+#include "maxpath.h"
+#include "common.h"
+#include "builtext.h"
+
+#ifdef LOADABLE_BUILTIN
+#  include "builtins.h"
+#endif
+
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+/* The list of remembered directories. */
+static char **pushd_directory_list = (char **)NULL;
+
+/* Number of existing slots in this list. */
+static int directory_list_size;
+
+/* Offset to the end of the list. */
+static int directory_list_offset;
+
+static void pushd_error PARAMS((int, char *));
+static void clear_directory_stack PARAMS((void));
+static int cd_to_string PARAMS((char *));
+static int change_to_temp PARAMS((char *));
+static void add_dirstack_element PARAMS((char *));
+static int get_dirstack_index PARAMS((intmax_t, int, int *));
+
+#define NOCD		0x01
+#define ROTATE		0x02
+#define LONGFORM	0x04
+#define CLEARSTAK	0x08
+
+int
+pushd_builtin (list)
+     WORD_LIST *list;
+{
+  WORD_LIST *orig_list;
+  char *temp, *current_directory, *top;
+  int j, flags, skipopt;
+  intmax_t num;
+  char direction;
+
+  orig_list = list;
+
+  CHECK_HELPOPT (list);
+  if (list && list->word && ISOPTION (list->word->word, '-'))
+    {
+      list = list->next;
+      skipopt = 1;
+    }
+  else
+    skipopt = 0;
+
+  /* If there is no argument list then switch current and
+     top of list. */
+  if (list == 0)
+    {
+      if (directory_list_offset == 0)
+	{
+	  builtin_error (_("no other directory"));
+	  return (EXECUTION_FAILURE);
+	}
+
+      current_directory = get_working_directory ("pushd");
+      if (current_directory == 0)
+	return (EXECUTION_FAILURE);
+
+      j = directory_list_offset - 1;
+      temp = pushd_directory_list[j];
+      pushd_directory_list[j] = current_directory;
+      j = change_to_temp (temp);
+      free (temp);
+      return j;
+    }
+
+  for (flags = 0; skipopt == 0 && list; list = list->next)
+    {
+      if (ISOPTION (list->word->word, 'n'))
+	{
+	  flags |= NOCD;
+	}
+      else if (ISOPTION (list->word->word, '-'))
+	{
+	  list = list->next;
+	  break;
+	}
+      else if (list->word->word[0] == '-' && list->word->word[1] == '\0')
+	/* Let `pushd -' work like it used to. */
+	break;
+      else if (((direction = list->word->word[0]) == '+') || direction == '-')
+	{
+	  if (legal_number (list->word->word + 1, &num) == 0)
+	    {
+	      sh_invalidnum (list->word->word);
+	      builtin_usage ();
+	      return (EX_USAGE);
+	    }
+
+	  if (direction == '-')
+	    num = directory_list_offset - num;
+
+	  if (num > directory_list_offset || num < 0)
+	    {
+	      pushd_error (directory_list_offset, list->word->word);
+	      return (EXECUTION_FAILURE);
+	    }
+	  flags |= ROTATE;
+	}
+      else if (*list->word->word == '-')
+	{
+	  sh_invalidopt (list->word->word);
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+      else
+	break;
+    }
+
+  if (flags & ROTATE)
+    {
+      /* Rotate the stack num times.  Remember, the current
+	 directory acts like it is part of the stack. */
+      temp = get_working_directory ("pushd");
+
+      if (num == 0)
+	{
+	  j = ((flags & NOCD) == 0) ? change_to_temp (temp) : EXECUTION_SUCCESS;
+	  free (temp);
+	  return j;
+	}
+
+      do
+	{
+	  top = pushd_directory_list[directory_list_offset - 1];
+
+	  for (j = directory_list_offset - 2; j > -1; j--)
+	    pushd_directory_list[j + 1] = pushd_directory_list[j];
+
+	  pushd_directory_list[j + 1] = temp;
+
+	  temp = top;
+	  num--;
+	}
+      while (num);
+
+      j = ((flags & NOCD) == 0) ? change_to_temp (temp) : EXECUTION_SUCCESS;
+      free (temp);
+      return j;
+    }
+
+  if (list == 0)
+    return (EXECUTION_SUCCESS);
+
+  /* Change to the directory in list->word->word.  Save the current
+     directory on the top of the stack. */
+  current_directory = get_working_directory ("pushd");
+  if (current_directory == 0)
+    return (EXECUTION_FAILURE);
+
+  j = ((flags & NOCD) == 0) ? cd_builtin (skipopt ? orig_list : list) : EXECUTION_SUCCESS;
+  if (j == EXECUTION_SUCCESS)
+    {
+      add_dirstack_element ((flags & NOCD) ? savestring (list->word->word) : current_directory);
+      dirs_builtin ((WORD_LIST *)NULL);
+      if (flags & NOCD)
+	free (current_directory);
+      return (EXECUTION_SUCCESS);
+    }
+  else
+    {
+      free (current_directory);
+      return (EXECUTION_FAILURE);
+    }
+}
+
+/* Pop the directory stack, and then change to the new top of the stack.
+   If LIST is non-null it should consist of a word +N or -N, which says
+   what element to delete from the stack.  The default is the top one. */
+int
+popd_builtin (list)
+     WORD_LIST *list;
+{
+  register int i;
+  intmax_t which;
+  int flags;
+  char direction;
+  char *which_word;
+
+  CHECK_HELPOPT (list);
+
+  which_word = (char *)NULL;
+  for (flags = 0, which = 0, direction = '+'; list; list = list->next)
+    {
+      if (ISOPTION (list->word->word, 'n'))
+	{
+	  flags |= NOCD;
+	}
+      else if (ISOPTION (list->word->word, '-'))
+	{
+	  list = list->next;
+	  break;
+	}
+      else if (((direction = list->word->word[0]) == '+') || direction == '-')
+	{
+	  if (legal_number (list->word->word + 1, &which) == 0)
+	    {
+	      sh_invalidnum (list->word->word);
+	      builtin_usage ();
+	      return (EX_USAGE);
+	    }
+	  which_word = list->word->word;
+	}
+      else if (*list->word->word == '-')
+	{
+	  sh_invalidopt (list->word->word);
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+      else if (*list->word->word)
+	{
+	  builtin_error (_("%s: invalid argument"), list->word->word);
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+      else
+	break;
+    }
+
+  if (which > directory_list_offset || (which < -directory_list_offset) || (directory_list_offset == 0 && which == 0))
+    {
+      pushd_error (directory_list_offset, which_word ? which_word : "");
+      return (EXECUTION_FAILURE);
+    }
+
+  /* Handle case of no specification, or top of stack specification. */
+  if ((direction == '+' && which == 0) ||
+      (direction == '-' && which == directory_list_offset))
+    {
+      i = ((flags & NOCD) == 0) ? cd_to_string (pushd_directory_list[directory_list_offset - 1])
+      				: EXECUTION_SUCCESS;
+      if (i != EXECUTION_SUCCESS)
+	return (i);
+      free (pushd_directory_list[--directory_list_offset]);
+    }
+  else
+    {
+      /* Since an offset other than the top directory was specified,
+	 remove that directory from the list and shift the remainder
+	 of the list into place. */
+      i = (direction == '+') ? directory_list_offset - which : which;
+      if (i < 0 || i > directory_list_offset)
+	{
+	  pushd_error (directory_list_offset, which_word ? which_word : "");
+	  return (EXECUTION_FAILURE);
+	}
+      free (pushd_directory_list[i]);
+      directory_list_offset--;
+
+      /* Shift the remainder of the list into place. */
+      for (; i < directory_list_offset; i++)
+	pushd_directory_list[i] = pushd_directory_list[i + 1];
+    }
+
+  dirs_builtin ((WORD_LIST *)NULL);
+  return (EXECUTION_SUCCESS);
+}
+
+/* Print the current list of directories on the directory stack. */
+int
+dirs_builtin (list)
+     WORD_LIST *list;
+{
+  int flags, desired_index, index_flag, vflag;
+  intmax_t i;
+  char *temp, *w;
+
+  CHECK_HELPOPT (list);
+  for (flags = vflag = index_flag = 0, desired_index = -1, w = ""; list; list = list->next)
+    {
+      if (ISOPTION (list->word->word, 'l'))
+	{
+	  flags |= LONGFORM;
+	}
+      else if (ISOPTION (list->word->word, 'c'))
+	{
+	  flags |= CLEARSTAK;
+	}
+      else if (ISOPTION (list->word->word, 'v'))
+	{
+	  vflag |= 2;
+	}
+      else if (ISOPTION (list->word->word, 'p'))
+	{
+	  vflag |= 1;
+	}
+      else if (ISOPTION (list->word->word, '-'))
+	{
+	  list = list->next;
+	  break;
+	}
+      else if (*list->word->word == '+' || *list->word->word == '-')
+	{
+	  int sign;
+	  if (legal_number (w = list->word->word + 1, &i) == 0)
+	    {
+	      sh_invalidnum (list->word->word);
+	      builtin_usage ();
+	      return (EX_USAGE);
+	    }
+	  sign = (*list->word->word == '+') ? 1 : -1;
+	  desired_index = get_dirstack_index (i, sign, &index_flag);
+	}
+      else
+	{
+	  sh_invalidopt (list->word->word);
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+
+  if (flags & CLEARSTAK)
+    {
+      clear_directory_stack ();
+      return (EXECUTION_SUCCESS);
+    }
+
+  if (index_flag && (desired_index < 0 || desired_index > directory_list_offset))
+    {
+      pushd_error (directory_list_offset, w);
+      return (EXECUTION_FAILURE);
+    }
+
+#define DIRSTACK_FORMAT(temp) \
+  (flags & LONGFORM) ? temp : polite_directory_format (temp)
+
+  /* The first directory printed is always the current working directory. */
+  if (index_flag == 0 || (index_flag == 1 && desired_index == 0))
+    {
+      temp = get_working_directory ("dirs");
+      if (temp == 0)
+	temp = savestring (_("<no current directory>"));
+      if (vflag & 2)
+	printf ("%2d  %s", 0, DIRSTACK_FORMAT (temp));
+      else
+	printf ("%s", DIRSTACK_FORMAT (temp));
+      free (temp);
+      if (index_flag)
+	{
+	  putchar ('\n');
+	  return (sh_chkwrite (EXECUTION_SUCCESS));
+	}
+    }
+
+#define DIRSTACK_ENTRY(i) \
+  (flags & LONGFORM) ? pushd_directory_list[i] \
+		     : polite_directory_format (pushd_directory_list[i])
+
+  /* Now print the requested directory stack entries. */
+  if (index_flag)
+    {
+      if (vflag & 2)
+	printf ("%2d  %s", directory_list_offset - desired_index,
+			   DIRSTACK_ENTRY (desired_index));
+      else
+	printf ("%s", DIRSTACK_ENTRY (desired_index));
+    }
+  else
+    for (i = directory_list_offset - 1; i >= 0; i--)
+      if (vflag >= 2)
+	printf ("\n%2d  %s", directory_list_offset - (int)i, DIRSTACK_ENTRY (i));
+      else
+	printf ("%s%s", (vflag & 1) ? "\n" : " ", DIRSTACK_ENTRY (i));
+
+  putchar ('\n');
+
+  return (sh_chkwrite (EXECUTION_SUCCESS));
+}
+
+static void
+pushd_error (offset, arg)
+     int offset;
+     char *arg;
+{
+  if (offset == 0)
+    builtin_error (_("directory stack empty"));
+  else
+    sh_erange (arg, _("directory stack index"));
+}
+
+static void
+clear_directory_stack ()
+{
+  register int i;
+
+  for (i = 0; i < directory_list_offset; i++)
+    free (pushd_directory_list[i]);
+  directory_list_offset = 0;
+}
+
+/* Switch to the directory in NAME.  This uses the cd_builtin to do the work,
+   so if the result is EXECUTION_FAILURE then an error message has already
+   been printed. */
+static int
+cd_to_string (name)
+     char *name;
+{
+  WORD_LIST *tlist;
+  WORD_LIST *dir;
+  int result;
+
+  dir = make_word_list (make_word (name), NULL);
+  tlist = make_word_list (make_word ("--"), dir);
+  result = cd_builtin (tlist);
+  dispose_words (tlist);
+  return (result);
+}
+
+static int
+change_to_temp (temp)
+     char *temp;
+{
+  int tt;
+
+  tt = temp ? cd_to_string (temp) : EXECUTION_FAILURE;
+
+  if (tt == EXECUTION_SUCCESS)
+    dirs_builtin ((WORD_LIST *)NULL);
+
+  return (tt);
+}
+
+static void
+add_dirstack_element (dir)
+     char *dir;
+{
+  if (directory_list_offset == directory_list_size)
+    pushd_directory_list = strvec_resize (pushd_directory_list, directory_list_size += 10);
+  pushd_directory_list[directory_list_offset++] = dir;
+}
+
+static int
+get_dirstack_index (ind, sign, indexp)
+     intmax_t ind;
+     int sign, *indexp;
+{
+  if (indexp)
+    *indexp = sign > 0 ? 1 : 2;
+
+  /* dirs +0 prints the current working directory. */
+  /* dirs -0 prints last element in directory stack */
+  if (ind == 0 && sign > 0)
+    return 0;
+  else if (ind == directory_list_offset)
+    {
+      if (indexp)
+	*indexp = sign > 0 ? 2 : 1;
+      return 0;
+    }
+  else if (ind >= 0 && ind <= directory_list_offset)
+    return (sign > 0 ? directory_list_offset - ind : ind);
+  else
+    return -1;
+}
+
+/* Used by the tilde expansion code. */
+char *
+get_dirstack_from_string (string)
+     char *string;
+{
+  int ind, sign, index_flag;
+  intmax_t i;
+
+  sign = 1;
+  if (*string == '-' || *string == '+')
+    {
+      sign = (*string == '-') ? -1 : 1;
+      string++;
+    }
+  if (legal_number (string, &i) == 0)
+    return ((char *)NULL);
+
+  index_flag = 0;
+  ind = get_dirstack_index (i, sign, &index_flag);
+  if (index_flag && (ind < 0 || ind > directory_list_offset))
+    return ((char *)NULL);
+  if (index_flag == 0 || (index_flag == 1 && ind == 0))
+    return (get_string_value ("PWD"));
+  else
+    return (pushd_directory_list[ind]);
+}
+
+#ifdef INCLUDE_UNUSED
+char *
+get_dirstack_element (ind, sign)
+     intmax_t ind;
+     int sign;
+{
+  int i;
+
+  i = get_dirstack_index (ind, sign, (int *)NULL);
+  return (i < 0 || i > directory_list_offset) ? (char *)NULL
+					      : pushd_directory_list[i];
+}
+#endif
+
+void
+set_dirstack_element (ind, sign, value)
+     intmax_t ind;
+     int  sign;
+     char *value;
+{
+  int i;
+
+  i = get_dirstack_index (ind, sign, (int *)NULL);
+  if (ind == 0 || i < 0 || i > directory_list_offset)
+    return;
+  free (pushd_directory_list[i]);
+  pushd_directory_list[i] = savestring (value);
+}
+
+WORD_LIST *
+get_directory_stack (flags)
+     int flags;
+{
+  register int i;
+  WORD_LIST *ret;
+  char *d, *t;
+
+  for (ret = (WORD_LIST *)NULL, i = 0; i < directory_list_offset; i++)
+    {
+      d = (flags&1) ? polite_directory_format (pushd_directory_list[i])
+		    : pushd_directory_list[i];
+      ret = make_word_list (make_word (d), ret);
+    }
+  /* Now the current directory. */
+  d = get_working_directory ("dirstack");
+  i = 0;	/* sentinel to decide whether or not to free d */
+  if (d == 0)
+    d = ".";
+  else
+    {
+      t = (flags&1) ? polite_directory_format (d) : d;
+      /* polite_directory_format sometimes returns its argument unchanged.
+	 If it does not, we can free d right away.  If it does, we need to
+	 mark d to be deleted later. */
+      if (t != d)
+	{
+	  free (d);
+	  d = t;
+	}
+      else /* t == d, so d is what we want */
+	i = 1;
+    }
+  ret = make_word_list (make_word (d), ret);
+  if (i)
+    free (d);
+  return ret;	/* was (REVERSE_LIST (ret, (WORD_LIST *)); */
+}
+
+#ifdef LOADABLE_BUILTIN
+char * const dirs_doc[] = {
+N_("Display the list of currently remembered directories.  Directories\n\
+    find their way onto the list with the `pushd' command; you can get\n\
+    back up through the list with the `popd' command.\n\
+    \n\
+    Options:\n\
+      -c	clear the directory stack by deleting all of the elements\n\
+      -l	do not print tilde-prefixed versions of directories relative\n\
+    	to your home directory\n\
+      -p	print the directory stack with one entry per line\n\
+      -v	print the directory stack with one entry per line prefixed\n\
+    	with its position in the stack\n\
+    \n\
+    Arguments:\n\
+      +N	Displays the Nth entry counting from the left of the list shown by\n\
+    	dirs when invoked without options, starting with zero.\n\
+    \n\
+      -N	Displays the Nth entry counting from the right of the list shown by\n\
+	dirs when invoked without options, starting with zero."),
+  (char *)NULL
+};
+
+char * const pushd_doc[] = {
+N_("Adds a directory to the top of the directory stack, or rotates\n\
+    the stack, making the new top of the stack the current working\n\
+    directory.  With no arguments, exchanges the top two directories.\n\
+    \n\
+    Options:\n\
+      -n	Suppresses the normal change of directory when adding\n\
+    	directories to the stack, so only the stack is manipulated.\n\
+    \n\
+    Arguments:\n\
+      +N	Rotates the stack so that the Nth directory (counting\n\
+    	from the left of the list shown by `dirs', starting with\n\
+    	zero) is at the top.\n\
+    \n\
+      -N	Rotates the stack so that the Nth directory (counting\n\
+    	from the right of the list shown by `dirs', starting with\n\
+    	zero) is at the top.\n\
+    \n\
+      dir	Adds DIR to the directory stack at the top, making it the\n\
+    	new current working directory.\n\
+    \n\
+    The `dirs' builtin displays the directory stack."),
+  (char *)NULL
+};
+
+char * const popd_doc[] = {
+N_("Removes entries from the directory stack.  With no arguments, removes\n\
+    the top directory from the stack, and changes to the new top directory.\n\
+    \n\
+    Options:\n\
+      -n	Suppresses the normal change of directory when removing\n\
+    	directories from the stack, so only the stack is manipulated.\n\
+    \n\
+    Arguments:\n\
+      +N	Removes the Nth entry counting from the left of the list\n\
+    	shown by `dirs', starting with zero.  For example: `popd +0'\n\
+    	removes the first directory, `popd +1' the second.\n\
+    \n\
+      -N	Removes the Nth entry counting from the right of the list\n\
+    	shown by `dirs', starting with zero.  For example: `popd -0'\n\
+    	removes the last directory, `popd -1' the next to last.\n\
+    \n\
+    The `dirs' builtin displays the directory stack."),
+  (char *)NULL
+};
+
+struct builtin pushd_struct = {
+	"pushd",
+	pushd_builtin,
+	BUILTIN_ENABLED,
+	pushd_doc,
+	"pushd [+N | -N] [-n] [dir]",
+	0
+};
+
+struct builtin popd_struct = {
+	"popd",
+	popd_builtin,
+	BUILTIN_ENABLED,
+	popd_doc,
+	"popd [+N | -N] [-n]",
+	0
+};
+
+struct builtin dirs_struct = {
+	"dirs",
+	dirs_builtin,
+	BUILTIN_ENABLED,
+	dirs_doc,
+	"dirs [-clpv] [+N] [-N]",
+	0
+};
+#endif /* LOADABLE_BUILTIN */
+
+#endif /* PUSHD_AND_POPD */
diff --git a/builtins/read.def b/builtins/read.def
new file mode 100644
index 0000000..39e16e8
--- /dev/null
+++ b/builtins/read.def
@@ -0,0 +1,1190 @@
+This file is read.def, from which is created read.c.
+It implements the builtin "read" in Bash.
+
+Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES read.c
+
+$BUILTIN read
+$FUNCTION read_builtin
+$SHORT_DOC read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p prompt] [-t timeout] [-u fd] [name ...]
+Read a line from the standard input and split it into fields.
+
+Reads a single line from the standard input, or from file descriptor FD
+if the -u option is supplied.  The line is split into fields as with word
+splitting, and the first word is assigned to the first NAME, the second
+word to the second NAME, and so on, with any leftover words assigned to
+the last NAME.  Only the characters found in $IFS are recognized as word
+delimiters.
+
+If no NAMEs are supplied, the line read is stored in the REPLY variable.
+
+Options:
+  -a array	assign the words read to sequential indices of the array
+		variable ARRAY, starting at zero
+  -d delim	continue until the first character of DELIM is read, rather
+		than newline
+  -e	use Readline to obtain the line
+  -i text	use TEXT as the initial text for Readline
+  -n nchars	return after reading NCHARS characters rather than waiting
+		for a newline, but honor a delimiter if fewer than
+		NCHARS characters are read before the delimiter
+  -N nchars	return only after reading exactly NCHARS characters, unless
+		EOF is encountered or read times out, ignoring any
+		delimiter
+  -p prompt	output the string PROMPT without a trailing newline before
+		attempting to read
+  -r	do not allow backslashes to escape any characters
+  -s	do not echo input coming from a terminal
+  -t timeout	time out and return failure if a complete line of
+		input is not read within TIMEOUT seconds.  The value of the
+		TMOUT variable is the default timeout.  TIMEOUT may be a
+		fractional number.  If TIMEOUT is 0, read returns
+		immediately, without trying to read any data, returning
+		success only if input is available on the specified
+		file descriptor.  The exit status is greater than 128
+		if the timeout is exceeded
+  -u fd	read from file descriptor FD instead of the standard input
+
+Exit Status:
+The return code is zero, unless end-of-file is encountered, read times out
+(in which case it's greater than 128), a variable assignment error occurs,
+or an invalid file descriptor is supplied as the argument to -u.
+$END
+
+#include <config.h>
+
+#include "bashtypes.h"
+#include "posixstat.h"
+
+#include <stdio.h>
+
+#include "bashansi.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <signal.h>
+#include <errno.h>
+
+#ifdef __CYGWIN__
+#  include <fcntl.h>
+#  include <io.h>
+#endif
+
+#include "../bashintl.h"
+
+#include "../shell.h"
+#include "common.h"
+#include "bashgetopt.h"
+#include "trap.h"
+
+#include <shtty.h>
+
+#if defined (READLINE)
+#include "../bashline.h"
+#include <readline/readline.h>
+#endif
+
+#if defined (BUFFERED_INPUT)
+#  include "input.h"
+#endif
+
+#include "shmbutil.h"
+
+#if !defined(errno)
+extern int errno;
+#endif
+
+struct ttsave
+{
+  int fd;
+  TTYSTRUCT attrs;
+};
+
+#if defined (READLINE)
+static void reset_attempted_completion_function PARAMS((char *));
+static int set_itext PARAMS((void));
+static char *edit_line PARAMS((char *, char *));
+static void set_eol_delim PARAMS((int));
+static void reset_eol_delim PARAMS((char *));
+#endif
+static SHELL_VAR *bind_read_variable PARAMS((char *, char *));
+#if defined (HANDLE_MULTIBYTE)
+static int read_mbchar PARAMS((int, char *, int, int, int));
+#endif
+static void ttyrestore PARAMS((struct ttsave *));
+
+static sighandler sigalrm PARAMS((int));
+static void reset_alarm PARAMS((void));
+
+/* Try this to see what the rest of the shell can do with the information. */
+procenv_t alrmbuf;
+int sigalrm_seen;
+
+static int reading, tty_modified;
+static SigHandler *old_alrm;
+static unsigned char delim;
+
+static struct ttsave termsave;
+
+/* In all cases, SIGALRM just sets a flag that we check periodically.  This
+   avoids problems with the semi-tricky stuff we do with the xfree of
+   input_string at the top of the unwind-protect list (see below). */
+
+/* Set a flag that CHECK_ALRM can check.  This relies on zread or read_builtin
+   calling trap.c:check_signals(), which knows about sigalrm_seen and alrmbuf. */
+static sighandler
+sigalrm (s)
+     int s;
+{
+  sigalrm_seen = 1;
+}
+
+static void
+reset_alarm ()
+{
+  /* Cancel alarm before restoring signal handler. */
+  falarm (0, 0);
+  set_signal_handler (SIGALRM, old_alrm);
+}
+
+/* Read the value of the shell variables whose names follow.
+   The reading is done from the current input stream, whatever
+   that may be.  Successive words of the input line are assigned
+   to the variables mentioned in LIST.  The last variable in LIST
+   gets the remainder of the words on the line.  If no variables
+   are mentioned in LIST, then the default variable is $REPLY. */
+int
+read_builtin (list)
+     WORD_LIST *list;
+{
+  register char *varname;
+  int size, nr, pass_next, saw_escape, eof, opt, retval, code, print_ps2, nflag;
+  volatile int i;
+  int input_is_tty, input_is_pipe, unbuffered_read, skip_ctlesc, skip_ctlnul;
+  int raw, edit, nchars, silent, have_timeout, ignore_delim, fd;
+  int lastsig, t_errno;
+  int mb_cur_max;
+  unsigned int tmsec, tmusec;
+  long ival, uval;
+  intmax_t intval;
+  char c;
+  char *input_string, *orig_input_string, *ifs_chars, *prompt, *arrayname;
+  char *e, *t, *t1, *ps2, *tofree;
+  struct stat tsb;
+  SHELL_VAR *var;
+  TTYSTRUCT ttattrs, ttset;
+#if defined (ARRAY_VARS)
+  WORD_LIST *alist;
+  int vflags;
+#endif
+#if defined (READLINE)
+  char *rlbuf, *itext;
+  int rlind;
+  FILE *save_instream;
+#endif
+
+  USE_VAR(size);
+  USE_VAR(i);
+  USE_VAR(pass_next);
+  USE_VAR(print_ps2);
+  USE_VAR(saw_escape);
+  USE_VAR(input_is_pipe);
+/*  USE_VAR(raw); */
+  USE_VAR(edit);
+  USE_VAR(tmsec);
+  USE_VAR(tmusec);
+  USE_VAR(nchars);
+  USE_VAR(silent);
+  USE_VAR(ifs_chars);
+  USE_VAR(prompt);
+  USE_VAR(arrayname);
+#if defined (READLINE)
+  USE_VAR(rlbuf);
+  USE_VAR(rlind);
+  USE_VAR(itext);
+#endif
+  USE_VAR(list);
+  USE_VAR(ps2);
+  USE_VAR(lastsig);
+
+  sigalrm_seen = reading = tty_modified = 0;
+
+  i = 0;		/* Index into the string that we are reading. */
+  raw = edit = 0;	/* Not reading raw input by default. */
+  silent = 0;
+  arrayname = prompt = (char *)NULL;
+  fd = 0;		/* file descriptor to read from */
+
+#if defined (READLINE)
+  rlbuf = itext = (char *)0;
+  rlind = 0;
+#endif
+
+  mb_cur_max = MB_CUR_MAX;
+  tmsec = tmusec = 0;		/* no timeout */
+  nr = nchars = input_is_tty = input_is_pipe = unbuffered_read = have_timeout = 0;
+  delim = '\n';		/* read until newline */
+  ignore_delim = nflag = 0;
+
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "ersa:d:i:n:p:t:u:N:")) != -1)
+    {
+      switch (opt)
+	{
+	case 'r':
+	  raw = 1;
+	  break;
+	case 'p':
+	  prompt = list_optarg;
+	  break;
+	case 's':
+	  silent = 1;
+	  break;
+	case 'e':
+#if defined (READLINE)
+	  edit = 1;
+#endif
+	  break;
+	case 'i':
+#if defined (READLINE)
+	  itext = list_optarg;
+#endif
+	  break;
+#if defined (ARRAY_VARS)
+	case 'a':
+	  arrayname = list_optarg;
+	  break;
+#endif
+	case 't':
+	  code = uconvert (list_optarg, &ival, &uval, (char **)NULL);
+	  if (code == 0 || ival < 0 || uval < 0)
+	    {
+	      builtin_error (_("%s: invalid timeout specification"), list_optarg);
+	      return (EXECUTION_FAILURE);
+	    }
+	  else
+	    {
+	      have_timeout = 1;
+	      tmsec = ival;
+	      tmusec = uval;
+	    }
+	  break;
+	case 'N':
+	  ignore_delim = 1;
+	  delim = -1;
+	case 'n':
+	  nflag = 1;
+	  code = legal_number (list_optarg, &intval);
+	  if (code == 0 || intval < 0 || intval != (int)intval)
+	    {
+	      sh_invalidnum (list_optarg);
+	      return (EXECUTION_FAILURE);
+	    }
+	  else
+	    nchars = intval;
+	  break;
+	case 'u':
+	  code = legal_number (list_optarg, &intval);
+	  if (code == 0 || intval < 0 || intval != (int)intval)
+	    {
+	      builtin_error (_("%s: invalid file descriptor specification"), list_optarg);
+	      return (EXECUTION_FAILURE);
+	    }
+	  else
+	    fd = intval;
+	  if (sh_validfd (fd) == 0)
+	    {
+	      builtin_error (_("%d: invalid file descriptor: %s"), fd, strerror (errno));
+	      return (EXECUTION_FAILURE);
+	    }
+	  break;
+	case 'd':
+	  delim = *list_optarg;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+  /* `read -t 0 var' tests whether input is available with select/FIONREAD,
+     and fails if those are unavailable */
+  if (have_timeout && tmsec == 0 && tmusec == 0)
+#if 0
+    return (EXECUTION_FAILURE);
+#else
+    return (input_avail (fd) ? EXECUTION_SUCCESS : EXECUTION_FAILURE);
+#endif
+
+  /* Convenience: check early whether or not the first of possibly several
+     variable names is a valid identifier, and bail early if so. */
+#if defined (ARRAY_VARS)
+  vflags = assoc_expand_once ? (VA_NOEXPAND|VA_ONEWORD) : 0;
+  if (list && legal_identifier (list->word->word) == 0 && valid_array_reference (list->word->word, vflags) == 0)
+#else
+  if (list && legal_identifier (list->word->word) == 0)
+#endif
+    {
+      sh_invalidid (list->word->word);
+      return (EXECUTION_FAILURE);
+    }
+
+  /* If we're asked to ignore the delimiter, make sure we do. */
+  if (ignore_delim)
+    delim = -1;
+
+  /* IF IFS is unset, we use the default of " \t\n". */
+  ifs_chars = getifs ();
+  if (ifs_chars == 0)		/* XXX - shouldn't happen */
+    ifs_chars = "";
+  /* If we want to read exactly NCHARS chars, don't split on IFS */
+  if (ignore_delim)
+    ifs_chars = "";
+  for (skip_ctlesc = skip_ctlnul = 0, e = ifs_chars; *e; e++)
+    skip_ctlesc |= *e == CTLESC, skip_ctlnul |= *e == CTLNUL;
+
+  input_string = (char *)xmalloc (size = 112);	/* XXX was 128 */
+  input_string[0] = '\0';
+
+  /* More input and options validation */
+  if (nflag == 1 && nchars == 0)
+    {
+      retval = read (fd, &c, 0);
+      retval = (retval >= 0) ? EXECUTION_SUCCESS : EXECUTION_FAILURE;
+      goto assign_vars;		/* bail early if asked to read 0 chars */
+    }
+
+  /* $TMOUT, if set, is the default timeout for read. */
+  if (have_timeout == 0 && (e = get_string_value ("TMOUT")))
+    {
+      code = uconvert (e, &ival, &uval, (char **)NULL);
+      if (code == 0 || ival < 0 || uval < 0)
+	tmsec = tmusec = 0;
+      else
+	{
+	  tmsec = ival;
+	  tmusec = uval;
+	}
+    }
+
+  begin_unwind_frame ("read_builtin");
+
+#if defined (BUFFERED_INPUT)
+  if (interactive == 0 && default_buffered_input >= 0 && fd_is_bash_input (fd))
+    sync_buffered_stream (default_buffered_input);
+#endif
+
+#if 1
+  input_is_tty = isatty (fd);
+#else
+  input_is_tty = 1;
+#endif
+  if (input_is_tty == 0)
+#ifndef __CYGWIN__
+    input_is_pipe = (lseek (fd, 0L, SEEK_CUR) < 0) && (errno == ESPIPE);
+#else
+    input_is_pipe = 1;
+#endif
+
+  /* If the -p, -e or -s flags were given, but input is not coming from the
+     terminal, turn them off. */
+  if ((prompt || edit || silent) && input_is_tty == 0)
+    {
+      prompt = (char *)NULL;
+#if defined (READLINE)
+      itext = (char *)NULL;
+#endif
+      edit = silent = 0;
+    }
+
+#if defined (READLINE)
+  if (edit)
+    add_unwind_protect (xfree, rlbuf);
+#endif
+
+  pass_next = 0;	/* Non-zero signifies last char was backslash. */
+  saw_escape = 0;	/* Non-zero signifies that we saw an escape char */
+
+  if (tmsec > 0 || tmusec > 0)
+    {
+      /* Turn off the timeout if stdin is a regular file (e.g. from
+	 input redirection). */
+      if ((fstat (fd, &tsb) < 0) || S_ISREG (tsb.st_mode))
+	tmsec = tmusec = 0;
+    }
+
+  if (tmsec > 0 || tmusec > 0)
+    {
+      code = setjmp_nosigs (alrmbuf);
+      if (code)
+	{
+	  sigalrm_seen = 0;
+	  /* Tricky.  The top of the unwind-protect stack is the free of
+	     input_string.  We want to run all the rest and use input_string,
+	     so we have to save input_string temporarily, run the unwind-
+	     protects, then restore input_string so we can use it later */
+	  orig_input_string = 0;
+	  input_string[i] = '\0';	/* make sure it's terminated */
+	  if (i == 0)
+	    {
+	      t = (char *)xmalloc (1);
+	      t[0] = 0;
+	    }
+	  else
+	    t = savestring (input_string);
+
+	  run_unwind_frame ("read_builtin");
+	  input_string = t;
+	  retval = 128+SIGALRM;
+	  goto assign_vars;
+	}
+      if (interactive_shell == 0)
+	initialize_terminating_signals ();
+      old_alrm = set_signal_handler (SIGALRM, sigalrm);
+      add_unwind_protect (reset_alarm, (char *)NULL);
+#if defined (READLINE)
+      if (edit)
+	{
+	  add_unwind_protect (reset_attempted_completion_function, (char *)NULL);
+	  add_unwind_protect (bashline_reset_event_hook, (char *)NULL);
+	}
+#endif
+      falarm (tmsec, tmusec);
+    }
+
+  /* If we've been asked to read only NCHARS chars, or we're using some
+     character other than newline to terminate the line, do the right
+     thing to readline or the tty. */
+  if (nchars > 0 || delim != '\n')
+    {
+#if defined (READLINE)
+      if (edit)
+	{
+	  if (nchars > 0)
+	    {
+	      unwind_protect_int (rl_num_chars_to_read);
+	      rl_num_chars_to_read = nchars;
+	    }
+	  if (delim != '\n')
+	    {
+	      set_eol_delim (delim);
+	      add_unwind_protect (reset_eol_delim, (char *)NULL);
+	    }
+	}
+      else
+#endif
+      if (input_is_tty)
+	{
+	  /* ttsave() */
+	  termsave.fd = fd;
+	  ttgetattr (fd, &ttattrs);
+	  termsave.attrs = ttattrs;
+
+	  ttset = ttattrs;	  
+	  i = silent ? ttfd_cbreak (fd, &ttset) : ttfd_onechar (fd, &ttset);
+	  if (i < 0)
+	    sh_ttyerror (1);
+	  tty_modified = 1;
+	  add_unwind_protect ((Function *)ttyrestore, (char *)&termsave);
+	  if (interactive_shell == 0)
+	    initialize_terminating_signals ();
+	}
+    }
+  else if (silent)	/* turn off echo but leave term in canonical mode */
+    {
+      /* ttsave (); */
+      termsave.fd = fd;
+      ttgetattr (fd, &ttattrs);
+      termsave.attrs = ttattrs;
+
+      ttset = ttattrs;
+      i = ttfd_noecho (fd, &ttset);			/* ttnoecho (); */
+      if (i < 0)
+	sh_ttyerror (1);
+
+      tty_modified = 1;
+      add_unwind_protect ((Function *)ttyrestore, (char *)&termsave);
+      if (interactive_shell == 0)
+	initialize_terminating_signals ();
+    }
+
+#if defined (READLINE)
+  save_instream = 0;
+  if (edit && fd != 0)
+    {
+      if (bash_readline_initialized == 0)
+	initialize_readline ();
+
+      unwind_protect_var (rl_instream);
+      save_instream = rl_instream;
+      rl_instream = fdopen (fd, "r");	
+    }
+#endif
+
+  /* This *must* be the top unwind-protect on the stack, so the manipulation
+     of the unwind-protect stack after the realloc() works right. */
+  add_unwind_protect (xfree, input_string);
+
+  CHECK_ALRM;
+  if ((nchars > 0) && (input_is_tty == 0) && ignore_delim)	/* read -N */
+    unbuffered_read = 2;
+  else if ((nchars > 0) || (delim != '\n') || input_is_pipe)
+    unbuffered_read = 1;
+
+  if (prompt && edit == 0)
+    {
+      fprintf (stderr, "%s", prompt);
+      fflush (stderr);
+    }
+
+#if defined (__CYGWIN__) && defined (O_TEXT)
+  setmode (0, O_TEXT);
+#endif
+
+  ps2 = 0;
+  for (print_ps2 = eof = retval = 0;;)
+    {
+      CHECK_ALRM;
+
+#if defined (READLINE)
+      if (edit)
+	{
+	  /* If we have a null delimiter, don't treat NULL as ending the line */
+	  if (rlbuf && rlbuf[rlind] == '\0' && delim != '\0')
+	    {
+	      free (rlbuf);
+	      rlbuf = (char *)0;
+	    }
+	  if (rlbuf == 0)
+	    {
+	      reading = 1;
+	      rlbuf = edit_line (prompt ? prompt : "", itext);
+	      reading = 0;
+	      rlind = 0;
+	    }
+	  if (rlbuf == 0)
+	    {
+	      eof = 1;
+	      break;
+	    }
+	  c = rlbuf[rlind++];
+	}
+      else
+	{
+#endif
+
+      if (print_ps2)
+	{
+	  if (ps2 == 0)
+	    ps2 = get_string_value ("PS2");
+	  fprintf (stderr, "%s", ps2 ? ps2 : "");
+	  fflush (stderr);
+	  print_ps2 = 0;
+	}
+
+      reading = 1;
+      CHECK_ALRM;
+      errno = 0;
+      if (unbuffered_read == 2)
+	retval = posixly_correct ? zreadintr (fd, &c, 1) : zreadn (fd, &c, nchars - nr);
+      else if (unbuffered_read)
+	retval = posixly_correct ? zreadintr (fd, &c, 1) : zread (fd, &c, 1);
+      else
+	retval = posixly_correct ? zreadcintr (fd, &c) : zreadc (fd, &c);
+      reading = 0;
+
+      if (retval <= 0)
+	{
+	  int t;
+
+	  t = errno;
+	  if (retval < 0 && errno == EINTR)
+	    {
+	      check_signals ();		/* in case we didn't call zread via zreadc */
+	      lastsig = LASTSIG();
+	      if (lastsig == 0)
+		lastsig = trapped_signal_received;
+#if 0
+	      run_pending_traps ();	/* because interrupt_immediately is not set */
+#endif
+	    }
+	  else
+	    lastsig = 0;
+	  if (terminating_signal && tty_modified)
+	    ttyrestore (&termsave);	/* fix terminal before exiting */
+	  CHECK_TERMSIG;
+	  eof = 1;
+	  errno = t;	/* preserve it for the error message below */
+	  break;
+	}
+
+      QUIT;		/* in case we didn't call check_signals() */
+#if defined (READLINE)
+	}
+#endif
+
+      if (retval <= 0)			/* XXX shouldn't happen */
+	CHECK_ALRM;
+
+      /* XXX -- use i + mb_cur_max (at least 4) for multibyte/read_mbchar */
+      if (i + (mb_cur_max > 4 ? mb_cur_max : 4) >= size)
+	{
+	  char *t;
+	  t = (char *)xrealloc (input_string, size += 128);
+
+	  /* Only need to change unwind-protect if input_string changes */
+	  if (t != input_string)
+	    {
+	      input_string = t;
+	      remove_unwind_protect ();
+	      add_unwind_protect (xfree, input_string);
+	    }
+	}
+
+      /* If the next character is to be accepted verbatim, a backslash
+	 newline pair still disappears from the input. */
+      if (pass_next)
+	{
+	  pass_next = 0;
+	  if (c == '\n')
+	    {
+	      if (skip_ctlesc == 0 && i > 0)
+		i--;		/* back up over the CTLESC */
+	      if (interactive && input_is_tty && raw == 0)
+		print_ps2 = 1;
+	    }
+	  else
+	    goto add_char;
+	  continue;
+	}
+
+      /* This may cause problems if IFS contains CTLESC */
+      if (c == '\\' && raw == 0)
+	{
+	  pass_next++;
+	  if (skip_ctlesc == 0)
+	    {
+	      saw_escape++;
+	      input_string[i++] = CTLESC;
+	    }
+	  continue;
+	}
+
+      if (ignore_delim == 0 && (unsigned char)c == delim)
+	break;
+
+      if (c == '\0' && delim != '\0')
+	continue;		/* skip NUL bytes in input */
+
+      if ((skip_ctlesc == 0 && c == CTLESC) || (skip_ctlnul == 0 && c == CTLNUL))
+	{
+	  saw_escape++;
+	  input_string[i++] = CTLESC;
+	}
+
+add_char:
+      input_string[i++] = c;
+      CHECK_ALRM;
+
+#if defined (HANDLE_MULTIBYTE)
+      /* XXX - what if C == 127? Can DEL introduce a multibyte sequence? */
+      if (mb_cur_max > 1 && is_basic (c) == 0)
+	{
+	  input_string[i] = '\0';	/* for simplicity and debugging */
+	  /* If we got input from readline, grab the next multibyte char from
+	     rlbuf. */
+#  if defined (READLINE)
+	  if (edit)
+	    {
+	      size_t clen;
+	      clen = mbrlen (rlbuf + rlind - 1, mb_cur_max, (mbstate_t *)NULL);
+	      /* We only deal with valid multibyte sequences longer than one
+		 byte. If we get anything else, we leave the one character
+		 copied and move on to the next. */
+	      if ((int)clen > 1)
+		{
+		  memcpy (input_string+i, rlbuf+rlind, clen-1);
+		  i += clen - 1;
+		  rlind += clen - 1;
+		}
+	    }
+	  else
+#  endif
+	  if (locale_utf8locale == 0 || ((c & 0x80) != 0))
+	    i += read_mbchar (fd, input_string, i, c, unbuffered_read);
+	}
+#endif
+
+      nr++;
+
+      if (nchars > 0 && nr >= nchars)
+	break;
+    }
+  input_string[i] = '\0';
+  CHECK_ALRM;
+
+#if defined (READLINE)
+  if (edit)
+    free (rlbuf);
+#endif
+
+  if (retval < 0)
+    {
+      t_errno = errno;
+      if (errno != EINTR)
+	builtin_error (_("read error: %d: %s"), fd, strerror (errno));
+      run_unwind_frame ("read_builtin");
+      return ((t_errno != EINTR) ? EXECUTION_FAILURE : 128+lastsig);
+    }
+
+  if (tmsec > 0 || tmusec > 0)
+    reset_alarm ();
+
+  if (nchars > 0 || delim != '\n')
+    {
+#if defined (READLINE)
+      if (edit)
+	{
+	  if (nchars > 0)
+	    rl_num_chars_to_read = 0;
+	  if (delim != '\n')
+	    reset_eol_delim ((char *)NULL);
+	}
+      else
+#endif
+      if (input_is_tty)
+	ttyrestore (&termsave);
+    }
+  else if (silent)
+    ttyrestore (&termsave);
+
+  if (unbuffered_read == 0)
+    zsyncfd (fd);
+
+#if defined (READLINE)
+  if (save_instream)
+    rl_instream = save_instream;	/* can't portably free it */
+#endif
+
+  discard_unwind_frame ("read_builtin");
+
+  retval = eof ? EXECUTION_FAILURE : EXECUTION_SUCCESS;
+
+assign_vars:
+
+#if defined (ARRAY_VARS)
+  /* If -a was given, take the string read, break it into a list of words,
+     an assign them to `arrayname' in turn. */
+  if (arrayname)
+    {
+      if (legal_identifier (arrayname) == 0)
+	{
+	  sh_invalidid (arrayname);
+	  free (input_string);
+	  return (EXECUTION_FAILURE);
+	}
+
+      var = find_or_make_array_variable (arrayname, 1);
+      if (var == 0)
+	{
+	  free (input_string);
+	  return EXECUTION_FAILURE;	/* readonly or noassign */
+	}
+      if (assoc_p (var))
+	{
+          builtin_error (_("%s: cannot convert associative to indexed array"), arrayname);
+	  free (input_string);
+	  return EXECUTION_FAILURE;	/* existing associative array */
+	}
+      else if (invisible_p (var))
+	VUNSETATTR (var, att_invisible);
+      array_flush (array_cell (var));
+
+      alist = list_string (input_string, ifs_chars, 0);
+      if (alist)
+	{
+	  if (saw_escape)
+	    dequote_list (alist);
+	  else
+	    word_list_remove_quoted_nulls (alist);
+	  assign_array_var_from_word_list (var, alist, 0);
+	  dispose_words (alist);
+	}
+      free (input_string);
+      return (retval);
+    }
+#endif /* ARRAY_VARS */ 
+
+  /* If there are no variables, save the text of the line read to the
+     variable $REPLY.  ksh93 strips leading and trailing IFS whitespace,
+     so that `read x ; echo "$x"' and `read ; echo "$REPLY"' behave the
+     same way, but I believe that the difference in behaviors is useful
+     enough to not do it.  Without the bash behavior, there is no way
+     to read a line completely without interpretation or modification
+     unless you mess with $IFS (e.g., setting it to the empty string).
+     If you disagree, change the occurrences of `#if 0' to `#if 1' below. */
+  if (list == 0)
+    {
+#if 0
+      orig_input_string = input_string;
+      for (t = input_string; ifs_chars && *ifs_chars && spctabnl(*t) && isifs(*t); t++)
+	;
+      input_string = t;
+      input_string = strip_trailing_ifs_whitespace (input_string, ifs_chars, saw_escape);
+#endif
+
+      if (saw_escape)
+	{
+	  t = dequote_string (input_string);
+	  var = bind_variable ("REPLY", t, 0);
+	  free (t);
+	}
+      else
+	var = bind_variable ("REPLY", input_string, 0);
+      if (var == 0 || readonly_p (var) || noassign_p (var))
+	retval = EXECUTION_FAILURE;
+      else
+	VUNSETATTR (var, att_invisible);
+
+      free (input_string);
+      return (retval);
+    }
+
+  /* This code implements the Posix.2 spec for splitting the words
+     read and assigning them to variables. */
+  orig_input_string = input_string;
+
+  /* Remove IFS white space at the beginning of the input string.  If
+     $IFS is null, no field splitting is performed. */
+  for (t = input_string; ifs_chars && *ifs_chars && spctabnl(*t) && isifs(*t); t++)
+    ;
+  input_string = t;
+  for (; list->next; list = list->next)
+    {
+      varname = list->word->word;
+#if defined (ARRAY_VARS)
+      if (legal_identifier (varname) == 0 && valid_array_reference (varname, vflags) == 0)
+#else
+      if (legal_identifier (varname) == 0)
+#endif
+	{
+	  sh_invalidid (varname);
+	  free (orig_input_string);
+	  return (EXECUTION_FAILURE);
+	}
+
+      /* If there are more variables than words read from the input,
+	 the remaining variables are set to the empty string. */
+      if (*input_string)
+	{
+	  /* This call updates INPUT_STRING. */
+	  t = get_word_from_string (&input_string, ifs_chars, &e);
+	  if (t)
+	    *e = '\0';
+	  /* Don't bother to remove the CTLESC unless we added one
+	     somewhere while reading the string. */
+	  if (t && saw_escape)
+	    {
+	      t1 = dequote_string (t);
+	      var = bind_read_variable (varname, t1);
+	      free (t1);
+	    }
+	  else
+	    var = bind_read_variable (varname, t ? t : "");
+	}
+      else
+	{
+	  t = (char *)0;
+	  var = bind_read_variable (varname, "");
+	}
+
+      FREE (t);
+      if (var == 0)
+	{
+	  free (orig_input_string);
+	  return (EXECUTION_FAILURE);
+	}
+
+      stupidly_hack_special_variables (varname);
+      VUNSETATTR (var, att_invisible);
+    }
+
+  /* Now assign the rest of the line to the last variable argument. */
+#if defined (ARRAY_VARS)
+  if (legal_identifier (list->word->word) == 0 && valid_array_reference (list->word->word, vflags) == 0)
+#else
+  if (legal_identifier (list->word->word) == 0)
+#endif
+    {
+      sh_invalidid (list->word->word);
+      free (orig_input_string);
+      return (EXECUTION_FAILURE);
+    }
+
+#if 0
+  /* This has to be done this way rather than using string_list
+     and list_string because Posix.2 says that the last variable gets the
+     remaining words and their intervening separators. */
+  input_string = strip_trailing_ifs_whitespace (input_string, ifs_chars, saw_escape);
+#else
+  /* Check whether or not the number of fields is exactly the same as the
+     number of variables. */
+  tofree = NULL;
+  if (*input_string)
+    {
+      t1 = input_string;
+      t = get_word_from_string (&input_string, ifs_chars, &e);
+      if (*input_string == 0)
+	tofree = input_string = t;
+      else
+	{
+	  input_string = strip_trailing_ifs_whitespace (t1, ifs_chars, saw_escape);
+	  tofree = t;
+	}
+    }
+#endif
+
+  if (saw_escape && input_string && *input_string)
+    {
+      t = dequote_string (input_string);
+      var = bind_read_variable (list->word->word, t);
+      free (t);
+    }
+  else
+    var = bind_read_variable (list->word->word, input_string ? input_string : "");
+
+  if (var)
+    {
+      stupidly_hack_special_variables (list->word->word);
+      VUNSETATTR (var, att_invisible);
+    }
+  else
+    retval = EXECUTION_FAILURE;
+
+  FREE (tofree);
+  free (orig_input_string);
+
+  return (retval);
+}
+
+static SHELL_VAR *
+bind_read_variable (name, value)
+     char *name, *value;
+{
+  SHELL_VAR *v;
+
+  v = builtin_bind_variable (name, value, 0);
+  return (v == 0 ? v
+		 : ((readonly_p (v) || noassign_p (v)) ? (SHELL_VAR *)NULL : v));
+}
+
+#if defined (HANDLE_MULTIBYTE)
+static int
+read_mbchar (fd, string, ind, ch, unbuffered)
+     int fd;
+     char *string;
+     int ind, ch, unbuffered;
+{
+  char mbchar[MB_LEN_MAX + 1];
+  int i, n, r;
+  char c;
+  size_t ret;
+  mbstate_t ps, ps_back;
+  wchar_t wc;
+
+  memset (&ps, '\0', sizeof (mbstate_t));
+  memset (&ps_back, '\0', sizeof (mbstate_t));
+  
+  mbchar[0] = ch;
+  i = 1;
+  for (n = 0; n <= MB_LEN_MAX; n++)
+    {
+      ps_back = ps;
+      ret = mbrtowc (&wc, mbchar, i, &ps);
+      if (ret == (size_t)-2)
+	{
+	  ps = ps_back;
+
+	  /* We don't want to be interrupted during a multibyte char read */
+	  if (unbuffered == 2)
+	    r = zreadn (fd, &c, 1);
+	  else if (unbuffered)
+	    r = zread (fd, &c, 1);
+	  else
+	    r = zreadc (fd, &c);
+	  if (r <= 0)
+	    goto mbchar_return;
+	  mbchar[i++] = c;	
+	  continue;
+	}
+      else if (ret == (size_t)-1 || ret == (size_t)0 || ret > (size_t)0)
+	break;
+    }
+
+mbchar_return:
+  if (i > 1)	/* read a multibyte char */
+    /* mbchar[0] is already string[ind-1] */
+    for (r = 1; r < i; r++)
+      string[ind+r-1] = mbchar[r];
+  return i - 1;
+}
+#endif
+
+
+static void
+ttyrestore (ttp)
+     struct ttsave *ttp;
+{
+  ttsetattr (ttp->fd, &(ttp->attrs));
+  tty_modified = 0;
+}
+
+void
+read_tty_cleanup ()
+{
+  if (tty_modified)
+    ttyrestore (&termsave);
+}
+
+int
+read_tty_modified ()
+{
+  return (tty_modified);
+}
+
+#if defined (READLINE)
+static rl_completion_func_t *old_attempted_completion_function = 0;
+static rl_hook_func_t *old_startup_hook;
+static char *deftext;
+
+static void
+reset_attempted_completion_function (cp)
+     char *cp;
+{
+  if (rl_attempted_completion_function == 0 && old_attempted_completion_function)
+    rl_attempted_completion_function = old_attempted_completion_function;
+}
+
+static int
+set_itext ()
+{
+  int r1, r2;
+
+  r1 = r2 = 0;
+  if (old_startup_hook)
+    r1 = (*old_startup_hook) ();
+  if (deftext)
+    {
+      r2 = rl_insert_text (deftext);
+      deftext = (char *)NULL;
+      rl_startup_hook = old_startup_hook;
+      old_startup_hook = (rl_hook_func_t *)NULL;
+    }
+  return (r1 || r2);
+}
+
+static char *
+edit_line (p, itext)
+     char *p;
+     char *itext;
+{
+  char *ret;
+  int len;
+
+  if (bash_readline_initialized == 0)
+    initialize_readline ();
+
+  old_attempted_completion_function = rl_attempted_completion_function;
+  rl_attempted_completion_function = (rl_completion_func_t *)NULL;
+  bashline_set_event_hook ();
+  if (itext)
+    {
+      old_startup_hook = rl_startup_hook;
+      rl_startup_hook = set_itext;
+      deftext = itext;
+    }
+
+  ret = readline (p);
+
+  rl_attempted_completion_function = old_attempted_completion_function;
+  old_attempted_completion_function = (rl_completion_func_t *)NULL;
+  bashline_reset_event_hook ();
+
+  if (ret == 0)
+    return ret;
+  len = strlen (ret);
+  ret = (char *)xrealloc (ret, len + 2);
+  ret[len++] = delim;
+  ret[len] = '\0';
+  return ret;
+}
+
+static int old_delim_ctype;
+static rl_command_func_t *old_delim_func;
+static int old_newline_ctype;
+static rl_command_func_t *old_newline_func;
+
+static unsigned char delim_char;
+
+static void
+set_eol_delim (c)
+     int c;
+{
+  Keymap cmap;
+
+  if (bash_readline_initialized == 0)
+    initialize_readline ();
+  cmap = rl_get_keymap ();
+
+  /* Save the old delimiter char binding */
+  old_newline_ctype = cmap[RETURN].type;
+  old_newline_func =  cmap[RETURN].function;
+  old_delim_ctype = cmap[c].type;
+  old_delim_func = cmap[c].function;
+
+  /* Change newline to self-insert */
+  cmap[RETURN].type = ISFUNC;
+  cmap[RETURN].function = rl_insert;
+
+  /* Bind the delimiter character to accept-line. */
+  cmap[c].type = ISFUNC;
+  cmap[c].function = rl_newline;
+
+  delim_char = c;
+}
+
+static void
+reset_eol_delim (cp)
+     char *cp;
+{
+  Keymap cmap;
+
+  cmap = rl_get_keymap ();
+
+  cmap[RETURN].type = old_newline_ctype;
+  cmap[RETURN].function = old_newline_func;
+
+  cmap[delim_char].type = old_delim_ctype;
+  cmap[delim_char].function = old_delim_func;
+}
+#endif
diff --git a/builtins/reserved.def b/builtins/reserved.def
new file mode 100644
index 0000000..33184b0
--- /dev/null
+++ b/builtins/reserved.def
@@ -0,0 +1,288 @@
+This file is reserved.def, in which the shell reserved words are defined.
+It has no direct C file production, but defines builtins for the Bash
+builtin help command.
+
+Copyright (C) 1987-2019 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$BUILTIN for
+$SHORT_DOC for NAME [in WORDS ... ] ; do COMMANDS; done
+Execute commands for each member in a list.
+
+The `for' loop executes a sequence of commands for each member in a
+list of items.  If `in WORDS ...;' is not present, then `in "$@"' is
+assumed.  For each element in WORDS, NAME is set to that element, and
+the COMMANDS are executed.
+
+Exit Status:
+Returns the status of the last command executed.
+$END
+
+$BUILTIN for ((
+$DOCNAME arith_for
+$SHORT_DOC for (( exp1; exp2; exp3 )); do COMMANDS; done
+Arithmetic for loop.
+
+Equivalent to
+	(( EXP1 ))
+	while (( EXP2 )); do
+		COMMANDS
+		(( EXP3 ))
+	done
+EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is
+omitted, it behaves as if it evaluates to 1.
+
+Exit Status:
+Returns the status of the last command executed.
+$END
+
+$BUILTIN select
+$SHORT_DOC select NAME [in WORDS ... ;] do COMMANDS; done
+Select words from a list and execute commands.
+
+The WORDS are expanded, generating a list of words.  The
+set of expanded words is printed on the standard error, each
+preceded by a number.  If `in WORDS' is not present, `in "$@"'
+is assumed.  The PS3 prompt is then displayed and a line read
+from the standard input.  If the line consists of the number
+corresponding to one of the displayed words, then NAME is set
+to that word.  If the line is empty, WORDS and the prompt are
+redisplayed.  If EOF is read, the command completes.  Any other
+value read causes NAME to be set to null.  The line read is saved
+in the variable REPLY.  COMMANDS are executed after each selection
+until a break command is executed.
+
+Exit Status:
+Returns the status of the last command executed.
+$END
+
+$BUILTIN time
+$SHORT_DOC time [-p] pipeline
+Report time consumed by pipeline's execution.
+
+Execute PIPELINE and print a summary of the real time, user CPU time,
+and system CPU time spent executing PIPELINE when it terminates.
+
+Options:
+  -p	print the timing summary in the portable Posix format
+
+The value of the TIMEFORMAT variable is used as the output format.
+
+Exit Status:
+The return status is the return status of PIPELINE.
+$END
+
+$BUILTIN case
+$SHORT_DOC case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac
+Execute commands based on pattern matching.
+
+Selectively execute COMMANDS based upon WORD matching PATTERN.  The
+`|' is used to separate multiple patterns.
+
+Exit Status:
+Returns the status of the last command executed.
+$END
+
+$BUILTIN if
+$SHORT_DOC if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else COMMANDS; ] fi
+Execute commands based on conditional.
+
+The `if COMMANDS' list is executed.  If its exit status is zero, then the
+`then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list is
+executed in turn, and if its exit status is zero, the corresponding
+`then COMMANDS' list is executed and the if command completes.  Otherwise,
+the `else COMMANDS' list is executed, if present.  The exit status of the
+entire construct is the exit status of the last command executed, or zero
+if no condition tested true.
+
+Exit Status:
+Returns the status of the last command executed.
+$END
+
+$BUILTIN while
+$SHORT_DOC while COMMANDS; do COMMANDS; done
+Execute commands as long as a test succeeds.
+
+Expand and execute COMMANDS as long as the final command in the
+`while' COMMANDS has an exit status of zero.
+
+Exit Status:
+Returns the status of the last command executed.
+$END
+
+$BUILTIN until
+$SHORT_DOC until COMMANDS; do COMMANDS; done
+Execute commands as long as a test does not succeed.
+
+Expand and execute COMMANDS as long as the final command in the
+`until' COMMANDS has an exit status which is not zero.
+
+Exit Status:
+Returns the status of the last command executed.
+$END
+
+$BUILTIN coproc
+$SHORT_DOC coproc [NAME] command [redirections]
+Create a coprocess named NAME.
+
+Execute COMMAND asynchronously, with the standard output and standard
+input of the command connected via a pipe to file descriptors assigned
+to indices 0 and 1 of an array variable NAME in the executing shell.
+The default NAME is "COPROC".
+
+Exit Status:
+The coproc command returns an exit status of 0.
+$END
+
+$BUILTIN function
+$SHORT_DOC function name { COMMANDS ; } or name () { COMMANDS ; }
+Define shell function.
+
+Create a shell function named NAME.  When invoked as a simple command,
+NAME runs COMMANDs in the calling shell's context.  When NAME is invoked,
+the arguments are passed to the function as $1...$n, and the function's
+name is in $FUNCNAME.
+
+Exit Status:
+Returns success unless NAME is readonly.
+$END
+
+$BUILTIN { ... }
+$DOCNAME grouping_braces
+$SHORT_DOC { COMMANDS ; }
+Group commands as a unit.
+
+Run a set of commands in a group.  This is one way to redirect an
+entire set of commands.
+
+Exit Status:
+Returns the status of the last command executed.
+$END
+
+$BUILTIN %
+$DOCNAME fg_percent
+$SHORT_DOC job_spec [&]
+Resume job in foreground.
+
+Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a
+stopped or background job.  JOB_SPEC can specify either a job name
+or a job number.  Following JOB_SPEC with a `&' places the job in
+the background, as if the job specification had been supplied as an
+argument to `bg'.
+
+Exit Status:
+Returns the status of the resumed job.
+$END
+
+$BUILTIN (( ... ))
+$DOCNAME arith
+$SHORT_DOC (( expression ))
+Evaluate arithmetic expression.
+
+The EXPRESSION is evaluated according to the rules for arithmetic
+evaluation.  Equivalent to `let "EXPRESSION"'.
+
+Exit Status:
+Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise.
+$END
+
+$BUILTIN [[ ... ]]
+$DOCNAME conditional
+$SHORT_DOC [[ expression ]]
+Execute conditional command.
+
+Returns a status of 0 or 1 depending on the evaluation of the conditional
+expression EXPRESSION.  Expressions are composed of the same primaries used
+by the `test' builtin, and may be combined using the following operators:
+
+  ( EXPRESSION )	Returns the value of EXPRESSION
+  ! EXPRESSION		True if EXPRESSION is false; else false
+  EXPR1 && EXPR2	True if both EXPR1 and EXPR2 are true; else false
+  EXPR1 || EXPR2	True if either EXPR1 or EXPR2 is true; else false
+
+When the `==' and `!=' operators are used, the string to the right of
+the operator is used as a pattern and pattern matching is performed.
+When the `=~' operator is used, the string to the right of the operator
+is matched as a regular expression.
+
+The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to
+determine the expression's value.
+
+Exit Status:
+0 or 1 depending on value of EXPRESSION.
+$END
+
+$BUILTIN variables
+$DOCNAME variable_help
+$SHORT_DOC variables - Names and meanings of some shell variables
+Common shell variable names and usage.
+
+BASH_VERSION	Version information for this Bash.
+CDPATH	A colon-separated list of directories to search
+		for directories given as arguments to `cd'.
+GLOBIGNORE	A colon-separated list of patterns describing filenames to
+		be ignored by pathname expansion.
+#if defined (HISTORY)
+HISTFILE	The name of the file where your command history is stored.
+HISTFILESIZE	The maximum number of lines this file can contain.
+HISTSIZE	The maximum number of history lines that a running
+		shell can access.
+#endif /* HISTORY */
+HOME	The complete pathname to your login directory.
+HOSTNAME	The name of the current host.
+HOSTTYPE	The type of CPU this version of Bash is running under.
+IGNOREEOF	Controls the action of the shell on receipt of an EOF
+		character as the sole input.  If set, then the value
+		of it is the number of EOF characters that can be seen
+		in a row on an empty line before the shell will exit
+		(default 10).  When unset, EOF signifies the end of input.
+MACHTYPE	A string describing the current system Bash is running on.
+MAILCHECK	How often, in seconds, Bash checks for new mail.
+MAILPATH	A colon-separated list of filenames which Bash checks
+		for new mail.
+OSTYPE	The version of Unix this version of Bash is running on.
+PATH	A colon-separated list of directories to search when
+		looking for commands.
+PROMPT_COMMAND	A command to be executed before the printing of each
+		primary prompt.
+PS1		The primary prompt string.
+PS2		The secondary prompt string.
+PWD		The full pathname of the current directory.
+SHELLOPTS	A colon-separated list of enabled shell options.
+TERM	The name of the current terminal type.
+TIMEFORMAT	The output format for timing statistics displayed by the
+		`time' reserved word.
+auto_resume	Non-null means a command word appearing on a line by
+		itself is first looked for in the list of currently
+		stopped jobs.  If found there, that job is foregrounded.
+		A value of `exact' means that the command word must
+		exactly match a command in the list of stopped jobs.  A
+		value of `substring' means that the command word must
+		match a substring of the job.  Any other value means that
+		the command must be a prefix of a stopped job.
+#if defined (HISTORY)
+#  if defined (BANG_HISTORY)
+histchars	Characters controlling history expansion and quick
+		substitution.  The first character is the history
+		substitution character, usually `!'.  The second is
+		the `quick substitution' character, usually `^'.  The
+		third is the `history comment' character, usually `#'.
+#  endif /* BANG_HISTORY */
+HISTIGNORE	A colon-separated list of patterns used to decide which
+		commands should be saved on the history list.
+#endif /* HISTORY */
+$END
diff --git a/builtins/return.def b/builtins/return.def
new file mode 100644
index 0000000..03c98eb
--- /dev/null
+++ b/builtins/return.def
@@ -0,0 +1,71 @@
+This file is return.def, from which is created return.c.
+It implements the builtin "return" in Bash.
+
+Copyright (C) 1987-2015 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES return.c
+
+$BUILTIN return
+
+$FUNCTION return_builtin
+$SHORT_DOC return [n]
+Return from a shell function.
+
+Causes a function or sourced script to exit with the return value
+specified by N.  If N is omitted, the return status is that of the
+last command executed within the function or script.
+
+Exit Status:
+Returns N, or failure if the shell is not executing a function or script.
+$END
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include "../bashintl.h"
+
+#include "../shell.h"
+#include "../execute_cmd.h"
+#include "common.h"
+#include "bashgetopt.h"
+
+/* If we are executing a user-defined function then exit with the value
+   specified as an argument.  if no argument is given, then the last
+   exit status is used. */
+int
+return_builtin (list)
+     WORD_LIST *list;
+{
+  CHECK_HELPOPT (list);
+
+  return_catch_value = get_exitstat (list);
+
+  if (return_catch_flag)
+    sh_longjmp (return_catch, 1);
+  else
+    {
+      builtin_error (_("can only `return' from a function or sourced script"));
+      return (EX_USAGE);
+    }
+}
diff --git a/builtins/set.def b/builtins/set.def
new file mode 100644
index 0000000..8ee0165
--- /dev/null
+++ b/builtins/set.def
@@ -0,0 +1,1018 @@
+This file is set.def, from which is created set.c.
+It implements the "set" and "unset" builtins in Bash.
+
+Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES set.c
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+
+#include "../bashansi.h"
+#include "../bashintl.h"
+
+#include "../shell.h"
+#include "../parser.h"
+#include "../flags.h"
+#include "common.h"
+#include "bashgetopt.h"
+
+#if defined (READLINE)
+#  include "../input.h"
+#  include "../bashline.h"
+#  include <readline/readline.h>
+#endif
+
+#if defined (HISTORY)
+#  include "../bashhist.h"
+#endif
+
+$BUILTIN set
+$FUNCTION set_builtin
+$SHORT_DOC set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]
+Set or unset values of shell options and positional parameters.
+
+Change the value of shell attributes and positional parameters, or
+display the names and values of shell variables.
+
+Options:
+  -a  Mark variables which are modified or created for export.
+  -b  Notify of job termination immediately.
+  -e  Exit immediately if a command exits with a non-zero status.
+  -f  Disable file name generation (globbing).
+  -h  Remember the location of commands as they are looked up.
+  -k  All assignment arguments are placed in the environment for a
+      command, not just those that precede the command name.
+  -m  Job control is enabled.
+  -n  Read commands but do not execute them.
+  -o option-name
+      Set the variable corresponding to option-name:
+          allexport    same as -a
+          braceexpand  same as -B
+#if defined (READLINE)
+          emacs        use an emacs-style line editing interface
+#endif /* READLINE */
+          errexit      same as -e
+          errtrace     same as -E
+          functrace    same as -T
+          hashall      same as -h
+#if defined (BANG_HISTORY)
+          histexpand   same as -H
+#endif /* BANG_HISTORY */
+#if defined (HISTORY)
+          history      enable command history
+#endif
+          ignoreeof    the shell will not exit upon reading EOF
+          interactive-comments
+                       allow comments to appear in interactive commands
+          keyword      same as -k
+#if defined (JOB_CONTROL)
+          monitor      same as -m
+#endif
+          noclobber    same as -C
+          noexec       same as -n
+          noglob       same as -f
+          nolog        currently accepted but ignored
+#if defined (JOB_CONTROL)
+          notify       same as -b
+#endif
+          nounset      same as -u
+          onecmd       same as -t
+          physical     same as -P
+          pipefail     the return value of a pipeline is the status of
+                       the last command to exit with a non-zero status,
+                       or zero if no command exited with a non-zero status
+          posix        change the behavior of bash where the default
+                       operation differs from the Posix standard to
+                       match the standard
+          privileged   same as -p
+          verbose      same as -v
+#if defined (READLINE)
+          vi           use a vi-style line editing interface
+#endif /* READLINE */
+          xtrace       same as -x
+  -p  Turned on whenever the real and effective user ids do not match.
+      Disables processing of the $ENV file and importing of shell
+      functions.  Turning this option off causes the effective uid and
+      gid to be set to the real uid and gid.
+  -t  Exit after reading and executing one command.
+  -u  Treat unset variables as an error when substituting.
+  -v  Print shell input lines as they are read.
+  -x  Print commands and their arguments as they are executed.
+#if defined (BRACE_EXPANSION)
+  -B  the shell will perform brace expansion
+#endif /* BRACE_EXPANSION */
+  -C  If set, disallow existing regular files to be overwritten
+      by redirection of output.
+  -E  If set, the ERR trap is inherited by shell functions.
+#if defined (BANG_HISTORY)
+  -H  Enable ! style history substitution.  This flag is on
+      by default when the shell is interactive.
+#endif /* BANG_HISTORY */
+  -P  If set, do not resolve symbolic links when executing commands
+      such as cd which change the current directory.
+  -T  If set, the DEBUG and RETURN traps are inherited by shell functions.
+  --  Assign any remaining arguments to the positional parameters.
+      If there are no remaining arguments, the positional parameters
+      are unset.
+  -   Assign any remaining arguments to the positional parameters.
+      The -x and -v options are turned off.
+
+Using + rather than - causes these flags to be turned off.  The
+flags can also be used upon invocation of the shell.  The current
+set of flags may be found in $-.  The remaining n ARGs are positional
+parameters and are assigned, in order, to $1, $2, .. $n.  If no
+ARGs are given, all shell variables are printed.
+
+Exit Status:
+Returns success unless an invalid option is given.
+$END
+
+typedef int setopt_set_func_t PARAMS((int, char *));
+typedef int setopt_get_func_t PARAMS((char *));
+
+static int find_minus_o_option PARAMS((char *));
+
+static void print_minus_o_option PARAMS((char *, int, int));
+static void print_all_shell_variables PARAMS((void));
+
+static int set_ignoreeof PARAMS((int, char *));
+static int set_posix_mode PARAMS((int, char *));
+
+#if defined (READLINE)
+static int set_edit_mode PARAMS((int, char *));
+static int get_edit_mode PARAMS((char *));
+#endif
+
+#if defined (HISTORY)
+static int bash_set_history PARAMS((int, char *));
+#endif
+
+static const char * const on = "on";
+static const char * const off = "off";
+
+static int previous_option_value;
+
+/* A struct used to match long options for set -o to the corresponding
+   option letter or internal variable.  The functions can be called to
+   dynamically generate values.  If you add a new variable name here
+   that doesn't have a corresponding single-character option letter, make
+   sure to set the value appropriately in reset_shell_options. */
+const struct {
+  char *name;
+  int letter;
+  int *variable;
+  setopt_set_func_t *set_func;
+  setopt_get_func_t *get_func;
+} o_options[] = {
+  { "allexport",  'a', (int *)NULL, (setopt_set_func_t *)NULL, (setopt_get_func_t *)NULL },
+#if defined (BRACE_EXPANSION)
+  { "braceexpand",'B', (int *)NULL, (setopt_set_func_t *)NULL, (setopt_get_func_t *)NULL  },
+#endif
+#if defined (READLINE)
+  { "emacs",     '\0', (int *)NULL, set_edit_mode, get_edit_mode },
+#endif
+  { "errexit",	  'e', (int *)NULL, (setopt_set_func_t *)NULL, (setopt_get_func_t *)NULL  },
+  { "errtrace",	  'E', (int *)NULL, (setopt_set_func_t *)NULL, (setopt_get_func_t *)NULL  },
+  { "functrace",  'T', (int *)NULL, (setopt_set_func_t *)NULL, (setopt_get_func_t *)NULL  },
+  { "hashall",    'h', (int *)NULL, (setopt_set_func_t *)NULL, (setopt_get_func_t *)NULL  },
+#if defined (BANG_HISTORY)
+  { "histexpand", 'H', (int *)NULL, (setopt_set_func_t *)NULL, (setopt_get_func_t *)NULL  },
+#endif /* BANG_HISTORY */
+#if defined (HISTORY)
+  { "history",   '\0', &enable_history_list, bash_set_history, (setopt_get_func_t *)NULL },
+#endif
+  { "ignoreeof", '\0', &ignoreeof, set_ignoreeof, (setopt_get_func_t *)NULL },
+  { "interactive-comments", '\0', &interactive_comments, (setopt_set_func_t *)NULL, (setopt_get_func_t *)NULL },
+  { "keyword",    'k', (int *)NULL, (setopt_set_func_t *)NULL, (setopt_get_func_t *)NULL  },
+#if defined (JOB_CONTROL)
+  { "monitor",	  'm', (int *)NULL, (setopt_set_func_t *)NULL, (setopt_get_func_t *)NULL  },
+#endif
+  { "noclobber",  'C', (int *)NULL, (setopt_set_func_t *)NULL, (setopt_get_func_t *)NULL  },
+  { "noexec",	  'n', (int *)NULL, (setopt_set_func_t *)NULL, (setopt_get_func_t *)NULL  },
+  { "noglob",	  'f', (int *)NULL, (setopt_set_func_t *)NULL, (setopt_get_func_t *)NULL  },
+#if defined (HISTORY)
+  { "nolog",     '\0', &dont_save_function_defs, (setopt_set_func_t *)NULL, (setopt_get_func_t *)NULL },
+#endif
+#if defined (JOB_CONTROL)
+  { "notify",	  'b', (int *)NULL, (setopt_set_func_t *)NULL, (setopt_get_func_t *)NULL  },
+#endif /* JOB_CONTROL */
+  { "nounset",	  'u', (int *)NULL, (setopt_set_func_t *)NULL, (setopt_get_func_t *)NULL  },
+  { "onecmd",	  't', (int *)NULL, (setopt_set_func_t *)NULL, (setopt_get_func_t *)NULL },
+  { "physical",   'P', (int *)NULL, (setopt_set_func_t *)NULL, (setopt_get_func_t *)NULL  },
+  { "pipefail",  '\0', &pipefail_opt, (setopt_set_func_t *)NULL, (setopt_get_func_t *)NULL  },
+  { "posix",     '\0', &posixly_correct, set_posix_mode, (setopt_get_func_t *)NULL },
+  { "privileged", 'p', (int *)NULL, (setopt_set_func_t *)NULL, (setopt_get_func_t *)NULL  },
+  { "verbose",	  'v', (int *)NULL, (setopt_set_func_t *)NULL, (setopt_get_func_t *)NULL  },
+#if defined (READLINE)
+  { "vi",        '\0', (int *)NULL, set_edit_mode, get_edit_mode },
+#endif
+  { "xtrace",	  'x', (int *)NULL, (setopt_set_func_t *)NULL, (setopt_get_func_t *)NULL  },
+  {(char *)NULL, 0 , (int *)NULL, (setopt_set_func_t *)NULL, (setopt_get_func_t *)NULL },
+};
+
+#define N_O_OPTIONS	(sizeof (o_options) / sizeof (o_options[0]))
+
+#define GET_BINARY_O_OPTION_VALUE(i, name) \
+  ((o_options[i].get_func) ? (*o_options[i].get_func) (name) \
+			   : (*o_options[i].variable))
+
+#define SET_BINARY_O_OPTION_VALUE(i, onoff, name) \
+  ((o_options[i].set_func) ? (*o_options[i].set_func) (onoff, name) \
+			   : (*o_options[i].variable = (onoff == FLAG_ON)))
+
+static int
+find_minus_o_option (name)
+     char *name;
+{
+  register int i;
+
+  for (i = 0; o_options[i].name; i++)
+    if (STREQ (name, o_options[i].name))
+      return i;
+  return -1;
+}
+
+int
+minus_o_option_value (name)
+     char *name;
+{
+  register int	i;
+  int *on_or_off;
+
+  i = find_minus_o_option (name);
+  if (i < 0)
+    return (-1);
+
+  if (o_options[i].letter)
+    {
+      on_or_off = find_flag (o_options[i].letter);
+      return ((on_or_off == FLAG_UNKNOWN) ? -1 : *on_or_off);
+    }
+  else
+    return (GET_BINARY_O_OPTION_VALUE (i, name));
+}
+
+#define MINUS_O_FORMAT "%-15s\t%s\n"
+
+static void
+print_minus_o_option (name, value, pflag)
+     char *name;
+     int value, pflag;
+{
+  if (pflag == 0)
+    printf (MINUS_O_FORMAT, name, value ? on : off);
+  else
+    printf ("set %co %s\n", value ? '-' : '+', name);
+}
+
+void
+list_minus_o_opts (mode, reusable)
+     int mode, reusable;
+{
+  register int	i;
+  int *on_or_off, value;
+
+  for (i = 0; o_options[i].name; i++)
+    {
+      if (o_options[i].letter)
+	{
+	  value = 0;
+	  on_or_off = find_flag (o_options[i].letter);
+	  if (on_or_off == FLAG_UNKNOWN)
+	    on_or_off = &value;
+	  if (mode == -1 || mode == *on_or_off)
+	    print_minus_o_option (o_options[i].name, *on_or_off, reusable);
+	}
+      else
+	{
+	  value = GET_BINARY_O_OPTION_VALUE (i, o_options[i].name);
+	  if (mode == -1 || mode == value)
+	    print_minus_o_option (o_options[i].name, value, reusable);
+	}
+    }
+}
+
+char **
+get_minus_o_opts ()
+{
+  char **ret;
+  int i;
+
+  ret = strvec_create (N_O_OPTIONS + 1);
+  for (i = 0; o_options[i].name; i++)
+    ret[i] = o_options[i].name;
+  ret[i] = (char *)NULL;
+  return ret;
+}
+
+char *
+get_current_options ()
+{
+  char *temp;
+  int i, posixopts;
+
+  posixopts = num_posix_options ();	/* shopts modified by posix mode */
+  /* Make the buffer big enough to hold the set -o options and the shopt
+     options modified by posix mode. */
+  temp = (char *)xmalloc (1 + N_O_OPTIONS + posixopts);
+  for (i = 0; o_options[i].name; i++)
+    {
+      if (o_options[i].letter)
+	temp[i] = *(find_flag (o_options[i].letter));
+      else
+	temp[i] = GET_BINARY_O_OPTION_VALUE (i, o_options[i].name);
+    }
+
+  /* Add the shell options that are modified by posix mode to the end of the
+     bitmap. They will be handled in set_current_options() */
+  get_posix_options (temp+i);
+  temp[i+posixopts] = '\0';
+  return (temp);
+}
+
+void
+set_current_options (bitmap)
+     const char *bitmap;
+{
+  int i, v, cv, *on_or_off;
+
+  if (bitmap == 0)
+    return;
+
+  for (i = 0; o_options[i].name; i++)
+    {
+      v = bitmap[i] ? FLAG_ON : FLAG_OFF;
+      if (o_options[i].letter)
+	{
+	  /* We should not get FLAG_UNKNOWN here */
+	  on_or_off = find_flag (o_options[i].letter);
+	  cv = *on_or_off ? FLAG_ON : FLAG_OFF;
+	  if (v != cv)
+	    change_flag (o_options[i].letter, v);
+	}
+      else
+	{
+	  cv = GET_BINARY_O_OPTION_VALUE (i, o_options[i].name);
+	  cv = cv ? FLAG_ON : FLAG_OFF;
+	  if (v != cv)
+	    SET_BINARY_O_OPTION_VALUE (i, v, o_options[i].name);
+	}
+    }
+
+  /* Now reset the variables changed by posix mode */
+  set_posix_options (bitmap+i);
+}
+
+static int
+set_ignoreeof (on_or_off, option_name)
+     int on_or_off;
+     char *option_name;
+{
+  ignoreeof = on_or_off == FLAG_ON;
+  unbind_variable_noref ("ignoreeof");
+  if (ignoreeof)
+    bind_variable ("IGNOREEOF", "10", 0); 
+  else
+    unbind_variable_noref ("IGNOREEOF");
+  sv_ignoreeof ("IGNOREEOF");
+  return 0;
+}
+
+static int
+set_posix_mode (on_or_off, option_name)
+     int on_or_off;
+     char *option_name;
+{
+  /* short-circuit on no-op */
+  if ((on_or_off == FLAG_ON && posixly_correct) ||
+      (on_or_off == FLAG_OFF && posixly_correct == 0))
+    return 0;
+
+  posixly_correct = on_or_off == FLAG_ON;
+  if (posixly_correct == 0)
+    unbind_variable_noref ("POSIXLY_CORRECT");
+  else
+    bind_variable ("POSIXLY_CORRECT", "y", 0);
+  sv_strict_posix ("POSIXLY_CORRECT");
+  return (0);
+}
+
+#if defined (READLINE)
+/* Magic.  This code `knows' how readline handles rl_editing_mode. */
+static int
+set_edit_mode (on_or_off, option_name)
+     int on_or_off;
+     char *option_name;
+{
+  int isemacs;
+
+  if (on_or_off == FLAG_ON)
+    {
+      rl_variable_bind ("editing-mode", option_name);
+
+      if (interactive)
+	with_input_from_stdin ();
+      no_line_editing = 0;
+    }
+  else
+    {
+      isemacs = rl_editing_mode == 1;
+      if ((isemacs && *option_name == 'e') || (!isemacs && *option_name == 'v'))
+	{
+	  if (interactive)
+	    with_input_from_stream (stdin, "stdin");
+	  no_line_editing = 1;
+	}
+    }
+  return 1-no_line_editing;
+}
+
+static int
+get_edit_mode (name)
+     char *name;
+{
+  return (*name == 'e' ? no_line_editing == 0 && rl_editing_mode == 1
+		       : no_line_editing == 0 && rl_editing_mode == 0);
+}
+#endif /* READLINE */
+
+#if defined (HISTORY)
+static int
+bash_set_history (on_or_off, option_name)
+     int on_or_off;
+     char *option_name;
+{
+  if (on_or_off == FLAG_ON)
+    {
+      enable_history_list = 1;
+      bash_history_enable ();
+      if (history_lines_this_session == 0)
+	load_history ();
+    }
+  else
+    {
+      enable_history_list = 0;
+      bash_history_disable ();
+    }
+  return (1 - enable_history_list);
+}
+#endif
+
+int
+set_minus_o_option (on_or_off, option_name)
+     int on_or_off;
+     char *option_name;
+{
+  register int i;
+
+  i = find_minus_o_option (option_name);
+  if (i < 0)
+    {
+      sh_invalidoptname (option_name);
+      return (EX_USAGE);
+    }
+
+  if (o_options[i].letter == 0)
+    {
+      previous_option_value = GET_BINARY_O_OPTION_VALUE (i, o_options[i].name);
+      SET_BINARY_O_OPTION_VALUE (i, on_or_off, option_name);
+      return (EXECUTION_SUCCESS);
+    }
+  else
+    {
+      if ((previous_option_value = change_flag (o_options[i].letter, on_or_off)) == FLAG_ERROR)
+	{
+	  sh_invalidoptname (option_name);
+	  return (EXECUTION_FAILURE);
+	}
+      else
+	return (EXECUTION_SUCCESS);
+    }
+}
+
+static void
+print_all_shell_variables ()
+{
+  SHELL_VAR **vars;
+
+  vars = all_shell_variables ();
+  if (vars)
+    {
+      print_var_list (vars);
+      free (vars);
+    }
+
+  /* POSIX.2 does not allow function names and definitions to be output when
+     `set' is invoked without options (PASC Interp #202). */
+  if (posixly_correct == 0)
+    {
+      vars = all_shell_functions ();
+      if (vars)
+	{
+	  print_func_list (vars);
+	  free (vars);
+	}
+    }
+}
+
+void
+set_shellopts ()
+{
+  char *value;
+  char tflag[N_O_OPTIONS];
+  int vsize, i, vptr, *ip, exported;
+  SHELL_VAR *v;
+
+  for (vsize = i = 0; o_options[i].name; i++)
+    {
+      tflag[i] = 0;
+      if (o_options[i].letter)
+	{
+	  ip = find_flag (o_options[i].letter);
+	  if (ip && *ip)
+	    {
+	      vsize += strlen (o_options[i].name) + 1;
+	      tflag[i] = 1;
+	    }
+	}
+      else if (GET_BINARY_O_OPTION_VALUE (i, o_options[i].name))
+	{
+	  vsize += strlen (o_options[i].name) + 1;
+	  tflag[i] = 1;
+	}
+    }
+
+  value = (char *)xmalloc (vsize + 1);
+
+  for (i = vptr = 0; o_options[i].name; i++)
+    {
+      if (tflag[i])
+	{
+	  strcpy (value + vptr, o_options[i].name);
+	  vptr += strlen (o_options[i].name);
+	  value[vptr++] = ':';
+	}
+    }
+
+  if (vptr)
+    vptr--;			/* cut off trailing colon */
+  value[vptr] = '\0';
+
+  v = find_variable ("SHELLOPTS");
+
+  /* Turn off the read-only attribute so we can bind the new value, and
+     note whether or not the variable was exported. */
+  if (v)
+    {
+      VUNSETATTR (v, att_readonly);
+      exported = exported_p (v);
+    }
+  else
+    exported = 0;
+
+  v = bind_variable ("SHELLOPTS", value, 0);
+
+  /* Turn the read-only attribute back on, and turn off the export attribute
+     if it was set implicitly by mark_modified_vars and SHELLOPTS was not
+     exported before we bound the new value. */
+  VSETATTR (v, att_readonly);
+  if (mark_modified_vars && exported == 0 && exported_p (v))
+    VUNSETATTR (v, att_exported);
+
+  free (value);
+}
+
+void
+parse_shellopts (value)
+     char *value;
+{
+  char *vname;
+  int vptr;
+
+  vptr = 0;
+  while (vname = extract_colon_unit (value, &vptr))
+    {
+      set_minus_o_option (FLAG_ON, vname);
+      free (vname);
+    }
+}
+
+void
+initialize_shell_options (no_shellopts)
+     int no_shellopts;
+{
+  char *temp;
+  SHELL_VAR *var;
+
+  if (no_shellopts == 0)
+    {
+      var = find_variable ("SHELLOPTS");
+      /* set up any shell options we may have inherited. */
+      if (var && imported_p (var))
+	{
+	  temp = (array_p (var) || assoc_p (var)) ? (char *)NULL : savestring (value_cell (var));
+	  if (temp)
+	    {
+	      parse_shellopts (temp);
+	      free (temp);
+	    }
+	}
+    }
+
+  /* Set up the $SHELLOPTS variable. */
+  set_shellopts ();
+}
+
+/* Reset the values of the -o options that are not also shell flags.  This is
+   called from execute_cmd.c:initialize_subshell() when setting up a subshell
+   to run an executable shell script without a leading `#!'. */
+void
+reset_shell_options ()
+{
+  pipefail_opt = 0;
+  ignoreeof = 0;
+
+#if defined (STRICT_POSIX)
+  posixly_correct = 1;
+#else
+  posixly_correct = 0;
+#endif
+#if defined (HISTORY)
+  dont_save_function_defs = 0;
+  remember_on_history = enable_history_list = 1;	/* XXX */
+#endif
+}
+
+/* Set some flags from the word values in the input list.  If LIST is empty,
+   then print out the values of the variables instead.  If LIST contains
+   non-flags, then set $1 - $9 to the successive words of LIST. */
+int
+set_builtin (list)
+     WORD_LIST *list;
+{
+  int on_or_off, flag_name, force_assignment, opts_changed, rv, r;
+  register char *arg;
+  char s[3];
+
+  if (list == 0)
+    {
+      print_all_shell_variables ();
+      return (sh_chkwrite (EXECUTION_SUCCESS));
+    }
+
+  /* Check validity of flag arguments. */
+  rv = EXECUTION_SUCCESS;
+  reset_internal_getopt ();
+  while ((flag_name = internal_getopt (list, optflags)) != -1)
+    {
+      switch (flag_name)
+	{
+	  case 'i':	/* don't allow set -i */
+	    s[0] = list_opttype;
+	    s[1] = 'i';
+	    s[2] = '\0';
+	    sh_invalidopt (s);
+	    builtin_usage ();
+	    return (EX_USAGE);
+	  CASE_HELPOPT;
+	  case '?':
+	    builtin_usage ();
+	    return (list_optopt == '?' ? EXECUTION_SUCCESS : EX_USAGE);
+	  default:
+	    break;
+	}
+    }
+    
+  /* Do the set command.  While the list consists of words starting with
+     '-' or '+' treat them as flags, otherwise, start assigning them to
+     $1 ... $n. */
+  for (force_assignment = opts_changed = 0; list; )
+    {
+      arg = list->word->word;
+
+      /* If the argument is `--' or `-' then signal the end of the list
+	 and remember the remaining arguments. */
+      if (arg[0] == '-' && (!arg[1] || (arg[1] == '-' && !arg[2])))
+	{
+	  list = list->next;
+
+	  /* `set --' unsets the positional parameters. */
+	  if (arg[1] == '-')
+	    force_assignment = 1;
+
+	  /* Until told differently, the old shell behaviour of
+	     `set - [arg ...]' being equivalent to `set +xv [arg ...]'
+	     stands.  Posix.2 says the behaviour is marked as obsolescent. */
+	  else
+	    {
+	      change_flag ('x', '+');
+	      change_flag ('v', '+');
+	      opts_changed = 1;
+	    }
+
+	  break;
+	}
+
+      if ((on_or_off = *arg) && (on_or_off == '-' || on_or_off == '+'))
+	{
+	  while (flag_name = *++arg)
+	    {
+	      if (flag_name == '?')
+		{
+		  builtin_usage ();
+		  return (EXECUTION_SUCCESS);
+		}
+	      else if (flag_name == 'o') /* -+o option-name */
+		{
+		  char *option_name;
+		  WORD_LIST *opt;
+
+		  opt = list->next;
+
+		  if (opt == 0)
+		    {
+		      list_minus_o_opts (-1, (on_or_off == '+'));
+		      rv = sh_chkwrite (rv);
+		      continue;
+		    }
+
+		  option_name = opt->word->word;
+
+		  if (option_name == 0 || *option_name == '\0' ||
+		      *option_name == '-' || *option_name == '+')
+		    {
+		      list_minus_o_opts (-1, (on_or_off == '+'));
+		      continue;
+		    }
+		  list = list->next; /* Skip over option name. */
+
+		  opts_changed = 1;
+		  if ((r = set_minus_o_option (on_or_off, option_name)) != EXECUTION_SUCCESS)
+		    {
+		      set_shellopts ();
+		      return (r);
+		    }
+		}
+	      else if (change_flag (flag_name, on_or_off) == FLAG_ERROR)
+		{
+		  s[0] = on_or_off;
+		  s[1] = flag_name;
+		  s[2] = '\0';
+		  sh_invalidopt (s);
+		  builtin_usage ();
+		  set_shellopts ();
+		  return (EXECUTION_FAILURE);
+		}
+	      opts_changed = 1;
+	    }
+	}
+      else
+	{
+	  break;
+	}
+      list = list->next;
+    }
+
+  /* Assigning $1 ... $n */
+  if (list || force_assignment)
+    remember_args (list, 1);
+  /* Set up new value of $SHELLOPTS */
+  if (opts_changed)
+    set_shellopts ();
+  return (rv);
+}
+
+$BUILTIN unset
+$FUNCTION unset_builtin
+$SHORT_DOC unset [-f] [-v] [-n] [name ...]
+Unset values and attributes of shell variables and functions.
+
+For each NAME, remove the corresponding variable or function.
+
+Options:
+  -f	treat each NAME as a shell function
+  -v	treat each NAME as a shell variable
+  -n	treat each NAME as a name reference and unset the variable itself
+		rather than the variable it references
+
+Without options, unset first tries to unset a variable, and if that fails,
+tries to unset a function.
+
+Some variables cannot be unset; also see `readonly'.
+
+Exit Status:
+Returns success unless an invalid option is given or a NAME is read-only.
+$END
+
+#define NEXT_VARIABLE()	any_failed++; list = list->next; continue;
+
+int
+unset_builtin (list)
+  WORD_LIST *list;
+{
+  int unset_function, unset_variable, unset_array, opt, nameref, any_failed;
+  int global_unset_func, global_unset_var, vflags, valid_id;
+  char *name, *tname;
+
+  unset_function = unset_variable = unset_array = nameref = any_failed = 0;
+  global_unset_func = global_unset_var = 0;
+
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "fnv")) != -1)
+    {
+      switch (opt)
+	{
+	case 'f':
+	  global_unset_func = 1;
+	  break;
+	case 'v':
+	  global_unset_var = 1;
+	  break;
+	case 'n':
+	  nameref = 1;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+
+  list = loptend;
+
+  if (global_unset_func && global_unset_var)
+    {
+      builtin_error (_("cannot simultaneously unset a function and a variable"));
+      return (EXECUTION_FAILURE);
+    }
+  else if (unset_function && nameref)
+    nameref = 0;
+
+#if defined (ARRAY_VARS)
+  vflags = assoc_expand_once ? (VA_NOEXPAND|VA_ONEWORD) : 0;
+#endif
+
+  while (list)
+    {
+      SHELL_VAR *var;
+      int tem;
+#if defined (ARRAY_VARS)
+      char *t;
+#endif
+
+      name = list->word->word;
+
+      unset_function = global_unset_func;
+      unset_variable = global_unset_var;
+
+#if defined (ARRAY_VARS)
+      unset_array = 0;
+      /* XXX valid array reference second arg was 0 */
+      if (!unset_function && nameref == 0 && valid_array_reference (name, vflags))
+	{
+	  t = strchr (name, '[');
+	  *t++ = '\0';
+	  unset_array++;
+	}
+#endif
+      /* Get error checking out of the way first.  The low-level functions
+	 just perform the unset, relying on the caller to verify. */
+      valid_id = legal_identifier (name);
+
+      /* Whether or not we are in posix mode, if neither -f nor -v appears,
+	 skip over trying to unset variables with invalid names and just
+	 treat them as potential shell function names. */
+      if (global_unset_func == 0 && global_unset_var == 0 && valid_id == 0)
+	{
+	  unset_variable = unset_array = 0;
+	  unset_function = 1;
+	}
+
+      /* Bash allows functions with names which are not valid identifiers
+	 to be created when not in posix mode, so check only when in posix
+	 mode when unsetting a function. */
+      if (unset_function == 0 && valid_id == 0)
+	{
+	  sh_invalidid (name);
+	  NEXT_VARIABLE ();
+	}
+
+      /* Search for functions here if -f supplied or if NAME cannot be a
+	 variable name. */
+      var = unset_function ? find_function (name)
+			   : (nameref ? find_variable_last_nameref (name, 0) : find_variable (name));
+
+      /* Some variables (but not functions yet) cannot be unset, period. */
+      if (var && unset_function == 0 && non_unsettable_p (var))
+	{
+	  builtin_error (_("%s: cannot unset"), name);
+	  NEXT_VARIABLE ();
+	}
+
+      /* if we have a nameref we want to use it */
+      if (var && unset_function == 0 && nameref == 0 && STREQ (name, name_cell(var)) == 0)
+	name = name_cell (var);
+
+      /* Posix.2 says try variables first, then functions.  If we would
+	 find a function after unsuccessfully searching for a variable,
+	 note that we're acting on a function now as if -f were
+	 supplied.  The readonly check below takes care of it. */
+      if (var == 0 && nameref == 0 &&  unset_variable == 0 && unset_function == 0)
+	{
+	  if (var = find_function (name))
+	    unset_function = 1;
+	}
+
+      /* Posix.2 says that unsetting readonly variables is an error. */
+      if (var && readonly_p (var))
+	{
+	  builtin_error (_("%s: cannot unset: readonly %s"),
+			 var->name, unset_function ? "function" : "variable");
+	  NEXT_VARIABLE ();
+	}
+
+      /* Unless the -f option is supplied, the name refers to a variable. */
+#if defined (ARRAY_VARS)
+      if (var && unset_array)
+	{
+	  /* Let unbind_array_element decide what to do with non-array vars */
+	  tem = unbind_array_element (var, t, vflags);	/* XXX new third arg */
+	  if (tem == -2 && array_p (var) == 0 && assoc_p (var) == 0)
+	    {
+	      builtin_error (_("%s: not an array variable"), var->name);
+	      NEXT_VARIABLE ();
+	    }
+	  else if (tem < 0)
+	    any_failed++;
+	}
+      else
+#endif /* ARRAY_VARS */
+      /* If we're trying to unset a nameref variable whose value isn't a set
+	 variable, make sure we still try to unset the nameref's value */
+      if (var == 0 && nameref == 0 && unset_function == 0)
+	{
+	  var = find_variable_last_nameref (name, 0);
+	  if (var && nameref_p (var))
+	    {
+#if defined (ARRAY_VARS)
+	      if (valid_array_reference (nameref_cell (var), 0))
+		{
+		  tname = savestring (nameref_cell (var));
+		  if (var = array_variable_part (tname, 0, &t, (int *)0))
+		    tem = unbind_array_element (var, t, vflags);	/* XXX new third arg */
+		  free (tname);
+		}
+	      else
+#endif
+		tem = unbind_variable (nameref_cell (var));
+	    }
+	  else
+	    tem = unbind_variable (name);
+	}
+      else
+	tem = unset_function ? unbind_func (name) : (nameref ? unbind_nameref (name) : unbind_variable (name));
+
+      /* This is what Posix.2 says:  ``If neither -f nor -v
+	 is specified, the name refers to a variable; if a variable by
+	 that name does not exist, a function by that name, if any,
+	 shall be unset.'' */
+      if (tem == -1 && nameref == 0 && unset_function == 0 && unset_variable == 0)
+	tem = unbind_func (name);
+
+      name = list->word->word;		/* reset above for namerefs */
+
+      /* SUSv3, POSIX.1-2001 say:  ``Unsetting a variable or function that
+	 was not previously set shall not be considered an error.'' */
+
+      if (unset_function == 0)
+	stupidly_hack_special_variables (name);
+
+      list = list->next;
+    }
+
+  return (any_failed ? EXECUTION_FAILURE : EXECUTION_SUCCESS);
+}
diff --git a/builtins/setattr.def b/builtins/setattr.def
new file mode 100644
index 0000000..a193462
--- /dev/null
+++ b/builtins/setattr.def
@@ -0,0 +1,661 @@
+This file is setattr.def, from which is created setattr.c.
+It implements the builtins "export" and "readonly", in Bash.
+
+Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES setattr.c
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include "../bashansi.h"
+#include "../bashintl.h"
+
+#include "../shell.h"
+#include "../execute_cmd.h"
+#include "../flags.h"
+#include "common.h"
+#include "bashgetopt.h"
+
+extern sh_builtin_func_t *this_shell_builtin;
+
+#ifdef ARRAY_VARS
+extern int declare_builtin PARAMS((WORD_LIST *));
+#endif
+
+#define READONLY_OR_EXPORT \
+  (this_shell_builtin == readonly_builtin || this_shell_builtin == export_builtin)
+
+$BUILTIN export
+$FUNCTION export_builtin
+$SHORT_DOC export [-fn] [name[=value] ...] or export -p
+Set export attribute for shell variables.
+
+Marks each NAME for automatic export to the environment of subsequently
+executed commands.  If VALUE is supplied, assign VALUE before exporting.
+
+Options:
+  -f	refer to shell functions
+  -n	remove the export property from each NAME
+  -p	display a list of all exported variables and functions
+
+An argument of `--' disables further option processing.
+
+Exit Status:
+Returns success unless an invalid option is given or NAME is invalid.
+$END
+
+/* For each variable name in LIST, make that variable appear in the
+   environment passed to simple commands.  If there is no LIST, then
+   print all such variables.  An argument of `-n' says to remove the
+   exported attribute from variables named in LIST.  An argument of
+  -f indicates that the names present in LIST refer to functions. */
+int
+export_builtin (list)
+     register WORD_LIST *list;
+{
+  return (set_or_show_attributes (list, att_exported, 0));
+}
+
+$BUILTIN readonly
+$FUNCTION readonly_builtin
+$SHORT_DOC readonly [-aAf] [name[=value] ...] or readonly -p
+Mark shell variables as unchangeable.
+
+Mark each NAME as read-only; the values of these NAMEs may not be
+changed by subsequent assignment.  If VALUE is supplied, assign VALUE
+before marking as read-only.
+
+Options:
+  -a	refer to indexed array variables
+  -A	refer to associative array variables
+  -f	refer to shell functions
+  -p	display a list of all readonly variables or functions,
+		depending on whether or not the -f option is given
+
+An argument of `--' disables further option processing.
+
+Exit Status:
+Returns success unless an invalid option is given or NAME is invalid.
+$END
+
+/* For each variable name in LIST, make that variable readonly.  Given an
+   empty LIST, print out all existing readonly variables. */
+int
+readonly_builtin (list)
+     register WORD_LIST *list;
+{
+  return (set_or_show_attributes (list, att_readonly, 0));
+}
+
+#if defined (ARRAY_VARS)
+#  define ATTROPTS	"aAfnp"
+#else
+#  define ATTROPTS	"fnp"
+#endif
+
+/* For each variable name in LIST, make that variable have the specified
+   ATTRIBUTE.  An arg of `-n' says to remove the attribute from the the
+   remaining names in LIST (doesn't work for readonly). */
+int
+set_or_show_attributes (list, attribute, nodefs)
+     register WORD_LIST *list;
+     int attribute, nodefs;
+{
+  register SHELL_VAR *var;
+  int assign, undo, any_failed, assign_error, opt;
+  int functions_only, arrays_only, assoc_only;
+  int aflags;
+  char *name;
+#if defined (ARRAY_VARS)
+  WORD_LIST *nlist, *tlist;
+  WORD_DESC *w;
+  char optw[8];
+  int opti;
+#endif
+
+  functions_only = arrays_only = assoc_only = 0;
+  undo = any_failed = assign_error = 0;
+  /* Read arguments from the front of the list. */
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, ATTROPTS)) != -1)
+    {
+      switch (opt)
+	{
+	  case 'n':
+	    undo = 1;
+	    break;
+	  case 'f':
+	    functions_only = 1;
+	    break;
+#if defined (ARRAY_VARS)
+	  case 'a':
+	    arrays_only = 1;
+	    break;
+	  case 'A':
+	    assoc_only = 1;
+	    break;
+#endif
+	  case 'p':
+	    break;
+	  CASE_HELPOPT;
+	  default:
+	    builtin_usage ();
+	    return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+  if (list)
+    {
+      if (attribute & att_exported)
+	array_needs_making = 1;
+
+      /* Cannot undo readonly status, silently disallowed. */
+      if (undo && (attribute & att_readonly))
+	attribute &= ~att_readonly;
+
+      while (list)
+	{
+	  name = list->word->word;
+
+	  if (functions_only)		/* xxx -f name */
+	    {
+	      var = find_function (name);
+	      if (var == 0)
+		{
+		  builtin_error (_("%s: not a function"), name);
+		  any_failed++;
+		}
+	      else if ((attribute & att_exported) && undo == 0 && exportable_function_name (name) == 0)
+		{
+		  builtin_error (_("%s: cannot export"), name);
+		  any_failed++;
+		}
+	      else
+		SETVARATTR (var, attribute, undo);
+
+	      list = list->next;
+	      continue;
+	    }
+
+	  /* xxx [-np] name[=value] */
+	  assign = assignment (name, 0);
+
+	  aflags = 0;
+	  if (assign)
+	    {
+	      name[assign] = '\0';
+	      if (name[assign - 1] == '+')
+		{
+		  aflags |= ASS_APPEND;
+		  name[assign - 1] = '\0';
+		}
+	    }
+
+	  if (legal_identifier (name) == 0)
+	    {
+	      sh_invalidid (name);
+	      if (assign)
+		assign_error++;
+	      else
+		any_failed++;
+	      list = list->next;
+	      continue;
+	    }
+
+	  if (assign)	/* xxx [-np] name=value */
+	    {
+	      name[assign] = '=';
+	      if (aflags & ASS_APPEND)
+		name[assign - 1] = '+';
+#if defined (ARRAY_VARS)
+	      /* Let's try something here.  Turn readonly -a xxx=yyy into
+		 declare -ra xxx=yyy and see what that gets us. */
+	      if (arrays_only || assoc_only)
+		{
+		  tlist = list->next;
+		  list->next = (WORD_LIST *)NULL;
+		  /* Add -g to avoid readonly/export creating local variables:
+		     only local/declare/typeset create local variables */
+		  opti = 0;
+		  optw[opti++] = '-';
+		  optw[opti++] = 'g';
+		  if (attribute & att_readonly)
+		    optw[opti++] = 'r';
+		  if (attribute & att_exported)
+		    optw[opti++] = 'x';
+		  if (arrays_only)
+		    optw[opti++] = 'a';
+		  else
+		    optw[opti++] = 'A';
+		  optw[opti] = '\0';
+
+		  w = make_word (optw);
+		  nlist = make_word_list (w, list);
+
+		  opt = declare_builtin (nlist);
+		  if (opt != EXECUTION_SUCCESS)
+		    assign_error++;
+		  list->next = tlist;
+		  dispose_word (w);
+		  free (nlist);
+		}
+	      else
+#endif
+	      /* This word has already been expanded once with command
+		 and parameter expansion.  Call do_assignment_no_expand (),
+		 which does not do command or parameter substitution.  If
+		 the assignment is not performed correctly, flag an error. */
+	      if (do_assignment_no_expand (name) == 0)
+		assign_error++;
+	      name[assign] = '\0';
+	      if (aflags & ASS_APPEND)
+		name[assign - 1] = '\0';
+	    }
+
+	  set_var_attribute (name, attribute, undo);
+	  if (assign)		/* restore word */
+	    {
+	      name[assign] = '=';
+	      if (aflags & ASS_APPEND)
+		name[assign-1] = '+';
+	    }
+	  list = list->next;
+	}
+    }
+  else
+    {
+      SHELL_VAR **variable_list;
+      register int i;
+
+      if ((attribute & att_function) || functions_only)
+	{
+	  variable_list = all_shell_functions ();
+	  if (attribute != att_function)
+	    attribute &= ~att_function;	/* so declare -xf works, for example */
+	}
+      else
+	variable_list = all_shell_variables ();
+
+#if defined (ARRAY_VARS)
+      if (attribute & att_array)
+	{
+	  arrays_only++;
+	  if (attribute != att_array)
+	    attribute &= ~att_array;
+	}
+      else if (attribute & att_assoc)
+	{
+	  assoc_only++;
+	  if (attribute != att_assoc)
+	    attribute &= ~att_assoc;
+	}
+#endif
+
+      if (variable_list)
+	{
+	  for (i = 0; var = variable_list[i]; i++)
+	    {
+#if defined (ARRAY_VARS)
+	      if (arrays_only && array_p (var) == 0)
+		continue;
+	      else if (assoc_only && assoc_p (var) == 0)
+		continue;
+#endif
+
+	      /* If we imported a variable that's not a valid identifier, don't
+		 show it in any lists. */
+	      if ((var->attributes & (att_invisible|att_imported)) == (att_invisible|att_imported))
+		continue;
+
+	      if ((var->attributes & attribute))
+		{
+		  show_var_attributes (var, READONLY_OR_EXPORT, nodefs);
+		  if (any_failed = sh_chkwrite (any_failed))
+		    break;
+		}
+	    }
+	  free (variable_list);
+	}
+    }
+
+  return (assign_error ? EX_BADASSIGN
+		       : ((any_failed == 0) ? EXECUTION_SUCCESS
+  					    : EXECUTION_FAILURE));
+}
+
+/* Show all variable variables (v == 1) or functions (v == 0) with
+   attributes. */
+int
+show_all_var_attributes (v, nodefs)
+     int v, nodefs;
+{
+  SHELL_VAR **variable_list, *var;
+  int any_failed;
+  register int i;
+
+  variable_list = v ? all_shell_variables () : all_shell_functions ();
+  if (variable_list == 0)  
+    return (EXECUTION_SUCCESS);
+
+  for (i = any_failed = 0; var = variable_list[i]; i++)
+    {
+      show_var_attributes (var, READONLY_OR_EXPORT, nodefs);
+      if (any_failed = sh_chkwrite (any_failed))
+        break;
+    }
+  free (variable_list);
+  return (any_failed == 0 ? EXECUTION_SUCCESS : EXECUTION_FAILURE);
+}
+
+/* Show all local variable variables with their attributes. This shows unset
+   local variables (all_local_variables called with 0 argment). */
+int
+show_local_var_attributes (v, nodefs)
+     int v, nodefs;
+{
+  SHELL_VAR **variable_list, *var;
+  int any_failed;
+  register int i;
+
+  variable_list = all_local_variables (0);
+  if (variable_list == 0)  
+    return (EXECUTION_SUCCESS);
+
+  for (i = any_failed = 0; var = variable_list[i]; i++)
+    {
+      show_var_attributes (var, READONLY_OR_EXPORT, nodefs);
+      if (any_failed = sh_chkwrite (any_failed))
+        break;
+    }
+  free (variable_list);
+  return (any_failed == 0 ? EXECUTION_SUCCESS : EXECUTION_FAILURE);
+}
+
+int
+var_attribute_string (var, pattr, flags)
+     SHELL_VAR *var;
+     int pattr;
+     char *flags;	/* filled in with attributes */
+{
+  int i;
+
+  i = 0;
+
+  /* pattr == 0 means we are called from `declare'. */
+  if (pattr == 0 || posixly_correct == 0)
+    {
+#if defined (ARRAY_VARS)
+      if (array_p (var))
+	flags[i++] = 'a';
+
+      if (assoc_p (var))
+	flags[i++] = 'A';
+#endif
+
+      if (function_p (var))
+	flags[i++] = 'f';
+
+      if (integer_p (var))
+	flags[i++] = 'i';
+
+      if (nameref_p (var))
+	flags[i++] = 'n';
+
+      if (readonly_p (var))
+	flags[i++] = 'r';
+
+      if (trace_p (var))
+	flags[i++] = 't';
+
+      if (exported_p (var))
+	flags[i++] = 'x';
+
+      if (capcase_p (var))
+	flags[i++] = 'c';
+
+      if (lowercase_p (var))
+	flags[i++] = 'l';
+
+      if (uppercase_p (var))
+	flags[i++] = 'u';
+    }
+  else
+    {
+#if defined (ARRAY_VARS)
+      if (array_p (var))
+	flags[i++] = 'a';
+
+      if (assoc_p (var))
+	flags[i++] = 'A';
+#endif
+
+      if (function_p (var))
+	flags[i++] = 'f';
+    }
+
+  flags[i] = '\0';
+  return i;
+}
+
+/* Show the attributes for shell variable VAR.  If NODEFS is non-zero,
+   don't show function definitions along with the name.  If PATTR is
+   non-zero, it indicates we're being called from `export' or `readonly'.
+   In POSIX mode, this prints the name of the calling builtin (`export'
+   or `readonly') instead of `declare', and doesn't print function defs
+   when called by `export' or `readonly'. */
+int
+show_var_attributes (var, pattr, nodefs)
+     SHELL_VAR *var;
+     int pattr, nodefs;
+{
+  char flags[MAX_ATTRIBUTES], *x;
+  int i;
+
+  i = var_attribute_string (var, pattr, flags);
+
+  /* If we're printing functions with definitions, print the function def
+     first, then the attributes, instead of printing output that can't be
+     reused as input to recreate the current state. */
+  if (function_p (var) && nodefs == 0 && (pattr == 0 || posixly_correct == 0))
+    {
+      printf ("%s\n", named_function_string (var->name, function_cell (var), FUNC_MULTILINE|FUNC_EXTERNAL));
+      nodefs++;
+      if (pattr == 0 && i == 1 && flags[0] == 'f')
+	return 0;		/* don't print `declare -f name' */
+    }
+
+  if (pattr == 0 || posixly_correct == 0)
+    printf ("declare -%s ", i ? flags : "-");
+  else if (i)
+    printf ("%s -%s ", this_command_name, flags);
+  else
+    printf ("%s ", this_command_name);
+
+#if defined (ARRAY_VARS)
+  if (invisible_p (var) && (array_p (var) || assoc_p (var)))
+    printf ("%s\n", var->name);
+  else if (array_p (var))
+    print_array_assignment (var, 0);
+  else if (assoc_p (var))
+    print_assoc_assignment (var, 0);
+  else
+#endif
+  /* force `readonly' and `export' to not print out function definitions
+     when in POSIX mode. */
+  if (nodefs || (function_p (var) && pattr != 0 && posixly_correct))
+    printf ("%s\n", var->name);
+  else if (function_p (var))
+    printf ("%s\n", named_function_string (var->name, function_cell (var), FUNC_MULTILINE|FUNC_EXTERNAL));
+  else if (invisible_p (var) || var_isset (var) == 0)
+    printf ("%s\n", var->name);
+  else
+    {
+      x = sh_double_quote (value_cell (var));
+      printf ("%s=%s\n", var->name, x);
+      free (x);
+    }
+  return (0);
+}
+
+int
+show_name_attributes (name, nodefs)
+     char *name;
+     int nodefs;
+{
+  SHELL_VAR *var;
+
+  var = find_variable_noref (name);
+
+  if (var)	/* show every variable with attributes, even unset ones */
+    {
+      show_var_attributes (var, READONLY_OR_EXPORT, nodefs);
+      return (0);
+    }
+  else
+    return (1);
+}
+
+int
+show_localname_attributes (name, nodefs)
+     char *name;
+     int nodefs;
+{
+  SHELL_VAR *var;
+
+  var = find_variable_noref (name);
+
+  if (var && local_p (var) && var->context == variable_context)	/* show every variable with attributes, even unset ones */
+    {
+      show_var_attributes (var, READONLY_OR_EXPORT, nodefs);
+      return (0);
+    }
+  else
+    return (1);
+}
+
+int
+show_func_attributes (name, nodefs)
+     char *name;
+     int nodefs;
+{
+  SHELL_VAR *var;
+
+  var = find_function (name);
+
+  if (var)
+    {
+      show_var_attributes (var, READONLY_OR_EXPORT, nodefs);
+      return (0);
+    }
+  else
+    return (1);
+}
+
+void
+set_var_attribute (name, attribute, undo)
+     char *name;
+     int attribute, undo;
+{
+  SHELL_VAR *var, *tv, *v, *refvar;
+  char *tvalue;
+
+  if (undo)
+    var = find_variable (name);
+  else
+    {
+      tv = find_tempenv_variable (name);
+      /* XXX -- need to handle case where tv is a temp variable in a
+	 function-scope context, since function_env has been merged into
+	 the local variables table. */
+      if (tv && tempvar_p (tv))
+	{
+	  tvalue = var_isset (tv) ? savestring (value_cell (tv)) : savestring ("");
+
+	  var = bind_variable (tv->name, tvalue, 0);
+	  if (var == 0)
+	    {
+	      free (tvalue);
+	      return;		/* XXX - no error message here */
+	    }
+	  var->attributes |= tv->attributes & ~att_tempvar;
+	  /* This avoids an error message when propagating a read-only var
+	     later on. */
+	  if (posixly_correct || shell_compatibility_level <= 44)
+	    {
+	      if (var->context == 0 && (attribute & att_readonly))
+		{
+		  /* Don't bother to set the `propagate to the global variables
+		     table' flag if we've just bound the variable in that
+		     table */
+		  v = find_global_variable (tv->name);
+		  if (v != var)
+		    VSETATTR (tv, att_propagate);
+		}
+	      else
+		VSETATTR (tv, att_propagate);
+	      if (var->context != 0)
+		VSETATTR (var, att_propagate);
+	    }
+
+	  SETVARATTR (tv, attribute, undo);	/* XXX */
+
+	  stupidly_hack_special_variables (tv->name);
+
+	  free (tvalue);
+	}
+      else
+	{
+	  var = find_variable_notempenv (name);
+	  if (var == 0)
+	    {
+	      /* We might have a nameref pointing to something that we can't
+		 resolve to a shell variable.  If we do, skip it.  We do a little
+		 checking just so we can print an error message. */
+	      refvar = find_variable_nameref_for_create (name, 0);
+	      if (refvar == INVALID_NAMEREF_VALUE)
+		return;
+	      /* Otherwise we probably have a nameref pointing to a variable
+		 that hasn't been created yet. bind_variable will take care
+		 of that. */
+	    }
+	  if (var == 0)
+	    {
+	      var = bind_variable (name, (char *)NULL, 0);
+	      if (var)
+		VSETATTR (var, att_invisible);
+	    }
+	  else if (var->context != 0)
+	    VSETATTR (var, att_propagate);
+	}
+    }
+
+  if (var)
+    SETVARATTR (var, attribute, undo);
+
+  if (var && (exported_p (var) || (attribute & att_exported)))
+    array_needs_making++;	/* XXX */
+}
diff --git a/builtins/shift.def b/builtins/shift.def
new file mode 100644
index 0000000..bb9af01
--- /dev/null
+++ b/builtins/shift.def
@@ -0,0 +1,90 @@
+This file is shift.def, from which is created shift.c.
+It implements the builtin "shift" in Bash.
+
+Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES shift.c
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include "../bashansi.h"
+#include "../bashintl.h"
+
+#include "../shell.h"
+#include "common.h"
+
+$BUILTIN shift
+$FUNCTION shift_builtin
+$SHORT_DOC shift [n]
+Shift positional parameters.
+
+Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is
+not given, it is assumed to be 1.
+
+Exit Status:
+Returns success unless N is negative or greater than $#.
+$END
+
+int print_shift_error;
+
+/* Shift the arguments ``left''.  Shift DOLLAR_VARS down then take one
+   off of REST_OF_ARGS and place it into DOLLAR_VARS[9].  If LIST has
+   anything in it, it is a number which says where to start the
+   shifting.  Return > 0 if `times' > $#, otherwise 0. */
+int
+shift_builtin (list)
+     WORD_LIST *list;
+{
+  intmax_t times;
+  int itimes, nargs;
+
+  CHECK_HELPOPT (list);
+
+  if (get_numeric_arg (list, 0, &times) == 0)
+    return (EXECUTION_FAILURE);
+
+  if (times == 0)
+    return (EXECUTION_SUCCESS);
+  else if (times < 0)
+    {
+      sh_erange (list ? list->word->word : NULL, _("shift count"));
+      return (EXECUTION_FAILURE);
+    }
+  nargs = number_of_args ();
+  if (times > nargs)
+    {
+      if (print_shift_error)
+	sh_erange (list ? list->word->word : NULL, _("shift count"));
+      return (EXECUTION_FAILURE);
+    }
+  else if (times == nargs)
+    clear_dollar_vars ();
+  else
+    shift_args (itimes = times);
+
+  invalidate_cached_quoted_dollar_at ();
+
+  return (EXECUTION_SUCCESS);
+}
diff --git a/builtins/shopt.def b/builtins/shopt.def
new file mode 100644
index 0000000..6dca224
--- /dev/null
+++ b/builtins/shopt.def
@@ -0,0 +1,899 @@
+This file is shopt.def, from which is created shopt.c.
+It implements the Bash `shopt' builtin.
+
+Copyright (C) 1994-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES shopt.c
+
+$BUILTIN shopt
+$FUNCTION shopt_builtin
+$SHORT_DOC shopt [-pqsu] [-o] [optname ...]
+Set and unset shell options.
+
+Change the setting of each shell option OPTNAME.  Without any option
+arguments, list each supplied OPTNAME, or all shell options if no
+OPTNAMEs are given, with an indication of whether or not each is set.
+
+Options:
+  -o	restrict OPTNAMEs to those defined for use with `set -o'
+  -p	print each shell option with an indication of its status
+  -q	suppress output
+  -s	enable (set) each OPTNAME
+  -u	disable (unset) each OPTNAME
+
+Exit Status:
+Returns success if OPTNAME is enabled; fails if an invalid option is
+given or OPTNAME is disabled.
+$END
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+
+#include "version.h"
+
+#include "../bashintl.h"
+
+#include "../shell.h"
+#include "../flags.h"
+#include "common.h"
+#include "bashgetopt.h"
+
+#if defined (READLINE)
+#  include "../bashline.h"
+#endif
+
+#if defined (HISTORY)
+#  include "../bashhist.h"
+#endif
+
+#define UNSETOPT	0
+#define SETOPT		1
+
+#define OPTFMT		"%-15s\t%s\n"
+
+extern int allow_null_glob_expansion, fail_glob_expansion, glob_dot_filenames;
+extern int cdable_vars, mail_warning, source_uses_path;
+extern int no_exit_on_failed_exec, print_shift_error;
+extern int check_hashed_filenames, promptvars;
+extern int cdspelling, expand_aliases;
+extern int extended_quote;
+extern int check_window_size;
+extern int glob_ignore_case, match_ignore_case;
+extern int hup_on_exit;
+extern int xpg_echo;
+extern int gnu_error_format;
+extern int check_jobs_at_exit;
+extern int autocd;
+extern int glob_star;
+extern int glob_asciirange;
+extern int lastpipe_opt;
+extern int inherit_errexit;
+extern int localvar_inherit;
+extern int localvar_unset;
+
+#if defined (EXTENDED_GLOB)
+extern int extended_glob;
+#endif
+
+#if defined (READLINE)
+extern int hist_verify, history_reediting, perform_hostname_completion;
+extern int no_empty_command_completion;
+extern int force_fignore;
+extern int dircomplete_spelling, dircomplete_expand;
+extern int complete_fullquote;
+
+extern int enable_hostname_completion PARAMS((int));
+#endif
+
+#if defined (PROGRAMMABLE_COMPLETION)
+extern int prog_completion_enabled;
+extern int progcomp_alias;
+#endif
+
+#if defined (DEBUGGER)
+extern int debugging_mode;
+#endif
+
+#if defined (ARRAY_VARS)
+extern int assoc_expand_once;
+extern int array_expand_once;
+#endif
+
+#if defined (SYSLOG_HISTORY)
+extern int syslog_history;
+#endif
+
+static void shopt_error PARAMS((char *));
+
+static int set_shellopts_after_change PARAMS((char *, int));
+static int set_compatibility_level PARAMS((char *, int));
+
+#if defined (RESTRICTED_SHELL)
+static int set_restricted_shell PARAMS((char *, int));
+#endif
+
+#if defined (READLINE)
+static int shopt_enable_hostname_completion PARAMS((char *, int));
+static int shopt_set_complete_direxpand PARAMS((char *, int));
+#endif
+
+static int shopt_set_debug_mode PARAMS((char *, int));
+
+static int shopt_login_shell;
+static int shopt_compat31;
+static int shopt_compat32;
+static int shopt_compat40;
+static int shopt_compat41;
+static int shopt_compat42;
+static int shopt_compat43;
+static int shopt_compat44;
+
+typedef int shopt_set_func_t PARAMS((char *, int));
+
+/* If you add a new variable name here, make sure to set the default value
+   appropriately in reset_shopt_options. */
+
+static struct {
+  char *name;
+  int  *value;
+  shopt_set_func_t *set_func;
+} shopt_vars[] = {
+  { "autocd", &autocd, (shopt_set_func_t *)NULL },
+#if defined (ARRAY_VARS)
+  { "assoc_expand_once", &assoc_expand_once, (shopt_set_func_t *)NULL },
+#endif
+  { "cdable_vars", &cdable_vars, (shopt_set_func_t *)NULL },
+  { "cdspell", &cdspelling, (shopt_set_func_t *)NULL },
+  { "checkhash", &check_hashed_filenames, (shopt_set_func_t *)NULL },
+#if defined (JOB_CONTROL)
+  { "checkjobs", &check_jobs_at_exit, (shopt_set_func_t *)NULL },
+#endif
+  { "checkwinsize", &check_window_size, (shopt_set_func_t *)NULL },
+#if defined (HISTORY)
+  { "cmdhist", &command_oriented_history, (shopt_set_func_t *)NULL },
+#endif
+  { "compat31", &shopt_compat31, set_compatibility_level },
+  { "compat32", &shopt_compat32, set_compatibility_level },
+  { "compat40", &shopt_compat40, set_compatibility_level },
+  { "compat41", &shopt_compat41, set_compatibility_level },
+  { "compat42", &shopt_compat42, set_compatibility_level },
+  { "compat43", &shopt_compat43, set_compatibility_level },
+  { "compat44", &shopt_compat44, set_compatibility_level },
+#if defined (READLINE)
+  { "complete_fullquote", &complete_fullquote, (shopt_set_func_t *)NULL},
+  { "direxpand", &dircomplete_expand, shopt_set_complete_direxpand },
+  { "dirspell", &dircomplete_spelling, (shopt_set_func_t *)NULL },
+#endif
+  { "dotglob", &glob_dot_filenames, (shopt_set_func_t *)NULL },
+  { "execfail", &no_exit_on_failed_exec, (shopt_set_func_t *)NULL },
+  { "expand_aliases", &expand_aliases, (shopt_set_func_t *)NULL },
+#if defined (DEBUGGER)
+  { "extdebug", &debugging_mode, shopt_set_debug_mode },
+#endif
+#if defined (EXTENDED_GLOB)
+  { "extglob", &extended_glob, (shopt_set_func_t *)NULL },
+#endif
+  { "extquote", &extended_quote, (shopt_set_func_t *)NULL },
+  { "failglob", &fail_glob_expansion, (shopt_set_func_t *)NULL },
+#if defined (READLINE)
+  { "force_fignore", &force_fignore, (shopt_set_func_t *)NULL },
+#endif
+  { "globasciiranges", &glob_asciirange, (shopt_set_func_t *)NULL },
+  { "globstar", &glob_star, (shopt_set_func_t *)NULL },
+  { "gnu_errfmt", &gnu_error_format, (shopt_set_func_t *)NULL },
+#if defined (HISTORY)
+  { "histappend", &force_append_history, (shopt_set_func_t *)NULL },
+#endif
+#if defined (READLINE)
+  { "histreedit", &history_reediting, (shopt_set_func_t *)NULL },
+  { "histverify", &hist_verify, (shopt_set_func_t *)NULL },
+  { "hostcomplete", &perform_hostname_completion, shopt_enable_hostname_completion },
+#endif
+  { "huponexit", &hup_on_exit, (shopt_set_func_t *)NULL },
+  { "inherit_errexit", &inherit_errexit, (shopt_set_func_t *)NULL },
+  { "interactive_comments", &interactive_comments, set_shellopts_after_change },
+  { "lastpipe", &lastpipe_opt, (shopt_set_func_t *)NULL },
+#if defined (HISTORY)
+  { "lithist", &literal_history, (shopt_set_func_t *)NULL },
+#endif
+  { "localvar_inherit", &localvar_inherit, (shopt_set_func_t *)NULL },
+  { "localvar_unset", &localvar_unset, (shopt_set_func_t *)NULL },
+  { "login_shell", &shopt_login_shell, set_login_shell },
+  { "mailwarn", &mail_warning, (shopt_set_func_t *)NULL },
+#if defined (READLINE)
+  { "no_empty_cmd_completion", &no_empty_command_completion, (shopt_set_func_t *)NULL },
+#endif
+  { "nocaseglob", &glob_ignore_case, (shopt_set_func_t *)NULL },
+  { "nocasematch", &match_ignore_case, (shopt_set_func_t *)NULL },
+  { "nullglob",	&allow_null_glob_expansion, (shopt_set_func_t *)NULL },
+#if defined (PROGRAMMABLE_COMPLETION)
+  { "progcomp", &prog_completion_enabled, (shopt_set_func_t *)NULL },
+#  if defined (ALIAS)
+  { "progcomp_alias", &progcomp_alias, (shopt_set_func_t *)NULL },
+#  endif
+#endif
+  { "promptvars", &promptvars, (shopt_set_func_t *)NULL },
+#if defined (RESTRICTED_SHELL)
+  { "restricted_shell", &restricted_shell, set_restricted_shell },
+#endif
+  { "shift_verbose", &print_shift_error, (shopt_set_func_t *)NULL },
+  { "sourcepath", &source_uses_path, (shopt_set_func_t *)NULL },
+#if defined (SYSLOG_HISTORY) && defined (SYSLOG_SHOPT)
+  { "syslog_history", &syslog_history, (shopt_set_func_t *)NULL },
+#endif
+  { "xpg_echo", &xpg_echo, (shopt_set_func_t *)NULL },
+  { (char *)0, (int *)0, (shopt_set_func_t *)NULL }
+};
+
+#define N_SHOPT_OPTIONS		(sizeof (shopt_vars) / sizeof (shopt_vars[0]))
+
+#define GET_SHOPT_OPTION_VALUE(i)	(*shopt_vars[i].value)
+
+static const char * const on = "on";
+static const char * const off = "off";
+
+static int find_shopt PARAMS((char *));
+static int toggle_shopts PARAMS((int, WORD_LIST *, int));
+static void print_shopt PARAMS((char *, int, int));
+static int list_shopts PARAMS((WORD_LIST *, int));
+static int list_some_shopts PARAMS((int, int));
+static int list_shopt_o_options PARAMS((WORD_LIST *, int));
+static int list_some_o_options PARAMS((int, int));
+static int set_shopt_o_options PARAMS((int, WORD_LIST *, int));
+
+#define SFLAG	0x01
+#define UFLAG	0x02
+#define QFLAG	0x04
+#define OFLAG	0x08
+#define PFLAG	0x10
+
+int
+shopt_builtin (list)
+     WORD_LIST *list;
+{
+  int opt, flags, rval;
+
+  flags = 0;
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "psuoq")) != -1)
+    {
+      switch (opt)
+	{
+	case 's':
+	  flags |= SFLAG;
+	  break;
+	case 'u':
+	  flags |= UFLAG;
+	  break;
+	case 'q':
+	  flags |= QFLAG;
+	  break;
+	case 'o':
+	  flags |= OFLAG;
+	  break;
+	case 'p':
+	  flags |= PFLAG;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+  if ((flags & (SFLAG|UFLAG)) == (SFLAG|UFLAG))
+    {
+      builtin_error (_("cannot set and unset shell options simultaneously"));
+      return (EXECUTION_FAILURE);
+    }
+
+  rval = EXECUTION_SUCCESS;
+  if ((flags & OFLAG) && ((flags & (SFLAG|UFLAG)) == 0))	/* shopt -o */
+    rval = list_shopt_o_options (list, flags);
+  else if (list && (flags & OFLAG))		/* shopt -so args */
+    rval = set_shopt_o_options ((flags & SFLAG) ? FLAG_ON : FLAG_OFF, list, flags & QFLAG);
+  else if (flags & OFLAG)	/* shopt -so */
+    rval = list_some_o_options ((flags & SFLAG) ? 1 : 0, flags);
+  else if (list && (flags & (SFLAG|UFLAG)))	/* shopt -su args */
+    rval = toggle_shopts ((flags & SFLAG) ? SETOPT : UNSETOPT, list, flags & QFLAG);
+  else if ((flags & (SFLAG|UFLAG)) == 0)	/* shopt [args] */
+    rval = list_shopts (list, flags);
+  else						/* shopt -su */
+    rval = list_some_shopts ((flags & SFLAG) ? SETOPT : UNSETOPT, flags);
+  return (rval);
+}
+
+/* Reset the options managed by `shopt' to the values they would have at
+   shell startup.  Variables from shopt_vars. */
+void
+reset_shopt_options ()
+{
+  autocd = cdable_vars = cdspelling = 0;
+  check_hashed_filenames = CHECKHASH_DEFAULT;
+  check_window_size = CHECKWINSIZE_DEFAULT;
+  allow_null_glob_expansion = glob_dot_filenames = 0;
+  no_exit_on_failed_exec = 0;
+  expand_aliases = 0;
+  extended_quote = 1;
+  fail_glob_expansion = 0;
+  glob_asciirange = GLOBASCII_DEFAULT;
+  glob_star = 0;
+  gnu_error_format = 0;
+  hup_on_exit = 0;
+  inherit_errexit = 0;
+  interactive_comments = 1;
+  lastpipe_opt = 0;
+  localvar_inherit = localvar_unset = 0;
+  mail_warning = 0;
+  glob_ignore_case = match_ignore_case = 0;
+  print_shift_error = 0;
+  source_uses_path = promptvars = 1;
+
+#if defined (JOB_CONTROL)
+  check_jobs_at_exit = 0;
+#endif
+
+#if defined (EXTENDED_GLOB)
+  extended_glob = EXTGLOB_DEFAULT;
+#endif
+
+#if defined (ARRAY_VARS)
+  assoc_expand_once = 0;
+#endif
+
+#if defined (HISTORY)
+  literal_history = 0;
+  force_append_history = 0;
+  command_oriented_history = 1;
+#endif
+
+#if defined (SYSLOG_HISTORY)
+#  if defined (SYSLOG_SHOPT)
+  syslog_history = SYSLOG_SHOPT;
+#  else
+  syslog_history = 1;
+#  endif /* SYSLOG_SHOPT */
+#endif
+
+#if defined (READLINE)
+  complete_fullquote = 1;
+  force_fignore = 1;
+  hist_verify = history_reediting = 0;
+  perform_hostname_completion = 1;
+#  if DIRCOMPLETE_EXPAND_DEFAULT
+  dircomplete_expand = 1;
+#  else
+  dircomplete_expand = 0;
+#endif
+  dircomplete_spelling = 0;
+  no_empty_command_completion = 0;
+#endif
+
+#if defined (PROGRAMMABLE_COMPLETION)
+  prog_completion_enabled = 1;
+#  if defined (ALIAS)
+  progcomp_alias = 0;
+#  endif
+#endif
+
+#if defined (DEFAULT_ECHO_TO_XPG) || defined (STRICT_POSIX)
+  xpg_echo = 1;
+#else
+  xpg_echo = 0;
+#endif /* DEFAULT_ECHO_TO_XPG */
+
+  shopt_login_shell = login_shell;
+}
+
+static int
+find_shopt (name)
+     char *name;
+{
+  int i;
+
+  for (i = 0; shopt_vars[i].name; i++)
+    if (STREQ (name, shopt_vars[i].name))
+      return i;
+  return -1;
+}
+
+static void
+shopt_error (s)
+     char *s;
+{
+  builtin_error (_("%s: invalid shell option name"), s);
+}
+
+static int
+toggle_shopts (mode, list, quiet)
+     int mode;
+     WORD_LIST *list;
+     int quiet;
+{
+  WORD_LIST *l;
+  int ind, rval;
+  SHELL_VAR *v;
+
+  for (l = list, rval = EXECUTION_SUCCESS; l; l = l->next)
+    {
+      ind = find_shopt (l->word->word);
+      if (ind < 0)
+	{
+	  shopt_error (l->word->word);
+	  rval = EXECUTION_FAILURE;
+	}
+      else
+	{
+	  *shopt_vars[ind].value = mode;	/* 1 for set, 0 for unset */
+	  if (shopt_vars[ind].set_func)
+	    (*shopt_vars[ind].set_func) (shopt_vars[ind].name, mode);
+	}
+    }
+
+  /* Don't set $BASHOPTS here if it hasn't already been initialized */
+  if (v = find_variable ("BASHOPTS"))
+    set_bashopts ();
+  return (rval);
+}
+
+static void
+print_shopt (name, val, flags)
+     char *name;
+     int val, flags;
+{
+  if (flags & PFLAG)
+    printf ("shopt %s %s\n", val ? "-s" : "-u", name);
+  else
+    printf (OPTFMT, name, val ? on : off);
+}
+
+/* List the values of all or any of the `shopt' options.  Returns 0 if
+   all were listed or all variables queried were on; 1 otherwise. */
+static int
+list_shopts (list, flags)
+     WORD_LIST *list;
+     int flags;
+{
+  WORD_LIST *l;
+  int i, val, rval;
+
+  if (list == 0)
+    {
+      for (i = 0; shopt_vars[i].name; i++)
+	{
+	  val = *shopt_vars[i].value;
+	  if ((flags & QFLAG) == 0)
+	    print_shopt (shopt_vars[i].name, val, flags);
+	}
+      return (sh_chkwrite (EXECUTION_SUCCESS));
+    }
+
+  for (l = list, rval = EXECUTION_SUCCESS; l; l = l->next)
+    {
+      i = find_shopt (l->word->word);
+      if (i < 0)
+	{
+	  shopt_error (l->word->word);
+	  rval = EXECUTION_FAILURE;
+	  continue;
+	}
+      val = *shopt_vars[i].value;
+      if (val == 0)
+	rval = EXECUTION_FAILURE;
+      if ((flags & QFLAG) == 0)
+	print_shopt (l->word->word, val, flags);
+    }
+
+  return (sh_chkwrite (rval));
+}
+
+static int
+list_some_shopts (mode, flags)
+     int mode, flags;
+{
+  int val, i;
+
+  for (i = 0; shopt_vars[i].name; i++)
+    {
+      val = *shopt_vars[i].value;
+      if (((flags & QFLAG) == 0) && mode == val)
+	print_shopt (shopt_vars[i].name, val, flags);
+    }
+  return (sh_chkwrite (EXECUTION_SUCCESS));
+}
+
+static int
+list_shopt_o_options (list, flags)
+     WORD_LIST *list;
+     int flags;
+{
+  WORD_LIST *l;
+  int val, rval;
+
+  if (list == 0)
+    {
+      if ((flags & QFLAG) == 0)
+	list_minus_o_opts (-1, (flags & PFLAG));
+      return (sh_chkwrite (EXECUTION_SUCCESS));
+    }
+
+  for (l = list, rval = EXECUTION_SUCCESS; l; l = l->next)
+    {
+      val = minus_o_option_value (l->word->word);
+      if (val == -1)
+	{
+	  sh_invalidoptname (l->word->word);
+	  rval = EXECUTION_FAILURE;
+	  continue;
+	}
+      if (val == 0)
+	rval = EXECUTION_FAILURE;
+      if ((flags & QFLAG) == 0)
+	{
+	  if (flags & PFLAG)
+	    printf ("set %co %s\n", val ? '-' : '+', l->word->word);
+	  else
+	    printf (OPTFMT, l->word->word, val ? on : off);
+	}
+    }
+  return (sh_chkwrite (rval));
+}
+
+static int
+list_some_o_options (mode, flags)
+     int mode, flags;
+{
+  if ((flags & QFLAG) == 0)
+    list_minus_o_opts (mode, (flags & PFLAG));
+  return (sh_chkwrite (EXECUTION_SUCCESS));
+}
+
+static int
+set_shopt_o_options (mode, list, quiet)
+     int mode;
+     WORD_LIST *list;
+     int quiet;
+{
+  WORD_LIST *l;
+  int rval;
+
+  for (l = list, rval = EXECUTION_SUCCESS; l; l = l->next)
+    {
+      if (set_minus_o_option (mode, l->word->word) == EXECUTION_FAILURE)
+	rval = EXECUTION_FAILURE;
+    }
+  set_shellopts ();
+  return rval;
+}
+
+/* If we set or unset interactive_comments with shopt, make sure the
+   change is reflected in $SHELLOPTS. */
+static int
+set_shellopts_after_change (option_name, mode)
+     char *option_name;
+     int mode;
+{
+  set_shellopts ();
+  return (0);
+}
+
+static int
+shopt_set_debug_mode (option_name, mode)
+     char *option_name;
+     int mode;
+{
+#if defined (DEBUGGER)
+  error_trace_mode = function_trace_mode = debugging_mode;
+  set_shellopts ();
+  if (debugging_mode)
+    init_bash_argv ();
+#endif
+  return (0);
+}
+
+#if defined (READLINE)
+static int
+shopt_enable_hostname_completion (option_name, mode)
+     char *option_name;
+     int mode;
+{
+  return (enable_hostname_completion (mode));
+}
+#endif
+
+static int
+set_compatibility_level (option_name, mode)
+     char *option_name;
+     int mode;
+{
+  int ind;
+  char *rhs;
+
+  /* If we're setting something, redo some of the work we did above in
+     toggle_shopt().  Unset everything and reset the appropriate option
+     based on OPTION_NAME. */
+  if (mode)
+    {
+      shopt_compat31 = shopt_compat32 = 0;
+      shopt_compat40 = shopt_compat41 = shopt_compat42 = shopt_compat43 = 0;
+      shopt_compat44 = 0;
+      ind = find_shopt (option_name);
+      *shopt_vars[ind].value = mode;
+    }
+
+  /* Then set shell_compatibility_level based on what remains */
+  if (shopt_compat31)
+    shell_compatibility_level = 31;
+  else if (shopt_compat32)
+    shell_compatibility_level = 32;
+  else if (shopt_compat40)
+    shell_compatibility_level = 40;
+  else if (shopt_compat41)
+    shell_compatibility_level = 41;
+  else if (shopt_compat42)
+    shell_compatibility_level = 42;
+  else if (shopt_compat43)
+    shell_compatibility_level = 43;
+  else if (shopt_compat44)
+    shell_compatibility_level = 44;
+  else
+    shell_compatibility_level = DEFAULT_COMPAT_LEVEL;
+
+  /* Make sure the current compatibility level is reflected in BASH_COMPAT */
+  rhs = itos (shell_compatibility_level);
+  bind_variable ("BASH_COMPAT", rhs, 0);
+  free (rhs);
+
+  return 0;
+}
+
+/* Set and unset the various compatibility options from the value of
+   shell_compatibility_level; used by sv_shcompat */
+void
+set_compatibility_opts ()
+{
+  shopt_compat31 = shopt_compat32 = 0;
+  shopt_compat40 = shopt_compat41 = shopt_compat42 = shopt_compat43 = 0;
+  shopt_compat44 = 0;
+  switch (shell_compatibility_level)
+    {
+      case DEFAULT_COMPAT_LEVEL:
+	break;
+      case 44:
+	shopt_compat44 = 1; break;
+      case 43:
+	shopt_compat43 = 1; break;
+      case 42:
+	shopt_compat42 = 1; break;
+      case 41:
+	shopt_compat41 = 1; break;
+      case 40:
+	shopt_compat40 = 1; break;
+      case 32:
+	shopt_compat32 = 1; break;
+      case 31:
+	shopt_compat31 = 1; break;
+    }
+}
+
+#if defined (READLINE)
+static int
+shopt_set_complete_direxpand (option_name, mode)
+     char *option_name;
+     int mode;
+{
+  set_directory_hook ();
+  return 0;
+}
+#endif
+
+#if defined (RESTRICTED_SHELL)
+/* Don't allow the value of restricted_shell to be modified. */
+
+static int
+set_restricted_shell (option_name, mode)
+     char *option_name;
+     int mode;
+{
+  static int save_restricted = -1;
+
+  if (save_restricted == -1)
+    save_restricted = shell_is_restricted (shell_name);
+
+  restricted_shell = save_restricted;
+  return (0);
+}
+#endif /* RESTRICTED_SHELL */
+
+/* Not static so shell.c can call it to initialize shopt_login_shell */
+int
+set_login_shell (option_name, mode)
+     char *option_name;
+     int mode;
+{
+  shopt_login_shell = login_shell != 0;
+  return (0);
+}
+
+char **
+get_shopt_options ()
+{
+  char **ret;
+  int n, i;
+
+  n = sizeof (shopt_vars) / sizeof (shopt_vars[0]);
+  ret = strvec_create (n + 1);
+  for (i = 0; shopt_vars[i].name; i++)
+    ret[i] = savestring (shopt_vars[i].name);
+  ret[i] = (char *)NULL;
+  return ret;
+}
+
+/*
+ * External interface for other parts of the shell.  NAME is a string option;
+ * MODE is 0 if we want to unset an option; 1 if we want to set an option.
+ * REUSABLE is 1 if we want to print output in a form that may be reused.
+ */
+int
+shopt_setopt (name, mode)
+     char *name;
+     int mode;
+{
+  WORD_LIST *wl;
+  int r;
+
+  wl = add_string_to_list (name, (WORD_LIST *)NULL);
+  r = toggle_shopts (mode, wl, 0);
+  dispose_words (wl);
+  return r;
+}
+
+int
+shopt_listopt (name, reusable)
+     char *name;
+     int reusable;
+{
+  int i;
+
+  if (name == 0)
+    return (list_shopts ((WORD_LIST *)NULL, reusable ? PFLAG : 0));
+
+  i = find_shopt (name);
+  if (i < 0)
+    {
+      shopt_error (name);
+      return (EXECUTION_FAILURE);
+    }
+
+  print_shopt (name, *shopt_vars[i].value, reusable ? PFLAG : 0);
+  return (sh_chkwrite (EXECUTION_SUCCESS));
+}
+
+void
+set_bashopts ()
+{
+  char *value;
+  char tflag[N_SHOPT_OPTIONS];
+  int vsize, i, vptr, *ip, exported;
+  SHELL_VAR *v;
+
+  for (vsize = i = 0; shopt_vars[i].name; i++)
+    {
+      tflag[i] = 0;
+      if (GET_SHOPT_OPTION_VALUE (i))
+	{
+	  vsize += strlen (shopt_vars[i].name) + 1;
+	  tflag[i] = 1;
+	}
+    }
+
+  value = (char *)xmalloc (vsize + 1);
+
+  for (i = vptr = 0; shopt_vars[i].name; i++)
+    {
+      if (tflag[i])
+	{
+	  strcpy (value + vptr, shopt_vars[i].name);
+	  vptr += strlen (shopt_vars[i].name);
+	  value[vptr++] = ':';
+	}
+    }
+
+  if (vptr)
+    vptr--;			/* cut off trailing colon */
+  value[vptr] = '\0';
+
+  v = find_variable ("BASHOPTS");
+
+  /* Turn off the read-only attribute so we can bind the new value, and
+     note whether or not the variable was exported. */
+  if (v)
+    {
+      VUNSETATTR (v, att_readonly);
+      exported = exported_p (v);
+    }
+  else
+    exported = 0;
+
+  v = bind_variable ("BASHOPTS", value, 0);
+
+  /* Turn the read-only attribute back on, and turn off the export attribute
+     if it was set implicitly by mark_modified_vars and SHELLOPTS was not
+     exported before we bound the new value. */
+  VSETATTR (v, att_readonly);
+  if (mark_modified_vars && exported == 0 && exported_p (v))
+    VUNSETATTR (v, att_exported);
+
+  free (value);
+}
+
+void
+parse_bashopts (value)
+     char *value;
+{
+  char *vname;
+  int vptr, ind;
+
+  vptr = 0;
+  while (vname = extract_colon_unit (value, &vptr))
+    {
+      ind = find_shopt (vname);
+      if (ind >= 0)
+	{
+          *shopt_vars[ind].value = 1;
+	  if (shopt_vars[ind].set_func)
+	    (*shopt_vars[ind].set_func) (shopt_vars[ind].name, 1);
+	}
+      free (vname);
+    }
+}
+
+void
+initialize_bashopts (no_bashopts)
+     int no_bashopts;
+{
+  char *temp;
+  SHELL_VAR *var;
+
+  if (no_bashopts == 0)
+    {
+      var = find_variable ("BASHOPTS");
+      /* set up any shell options we may have inherited. */
+      if (var && imported_p (var))
+	{
+	  temp = (array_p (var) || assoc_p (var)) ? (char *)NULL : savestring (value_cell (var));
+	  if (temp)
+	    {
+	      parse_bashopts (temp);
+	      free (temp);
+	    }
+	}
+    }
+
+  /* Set up the $BASHOPTS variable. */
+  set_bashopts ();
+}
diff --git a/builtins/source.def b/builtins/source.def
new file mode 100644
index 0000000..5b2f994
--- /dev/null
+++ b/builtins/source.def
@@ -0,0 +1,200 @@
+This file is source.def, from which is created source.c.
+It implements the builtins "." and  "source" in Bash.
+
+Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES source.c
+
+$BUILTIN source
+$FUNCTION source_builtin
+$SHORT_DOC source filename [arguments]
+Execute commands from a file in the current shell.
+
+Read and execute commands from FILENAME in the current shell.  The
+entries in $PATH are used to find the directory containing FILENAME.
+If any ARGUMENTS are supplied, they become the positional parameters
+when FILENAME is executed.
+
+Exit Status:
+Returns the status of the last command executed in FILENAME; fails if
+FILENAME cannot be read.
+$END
+
+$BUILTIN .
+$DOCNAME dot
+$FUNCTION source_builtin
+$SHORT_DOC . filename [arguments]
+Execute commands from a file in the current shell.
+
+Read and execute commands from FILENAME in the current shell.  The
+entries in $PATH are used to find the directory containing FILENAME.
+If any ARGUMENTS are supplied, they become the positional parameters
+when FILENAME is executed.
+
+Exit Status:
+Returns the status of the last command executed in FILENAME; fails if
+FILENAME cannot be read.
+$END
+
+#include <config.h>
+
+#include "../bashtypes.h"
+#include "posixstat.h"
+#include "filecntl.h"
+#if ! defined(_MINIX) && defined (HAVE_SYS_FILE_H)
+#  include <sys/file.h>
+#endif
+#include <errno.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "../bashansi.h"
+#include "../bashintl.h"
+
+#include "../shell.h"
+#include "../execute_cmd.h"
+#include "../flags.h"
+#include "../findcmd.h"
+#include "common.h"
+#include "bashgetopt.h"
+#include "../trap.h"
+
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+static void maybe_pop_dollar_vars PARAMS((void));
+
+/* If non-zero, `.' uses $PATH to look up the script to be sourced. */
+int source_uses_path = 1;
+
+/* If non-zero, `.' looks in the current directory if the filename argument
+   is not found in the $PATH. */
+int source_searches_cwd = 1;
+
+/* If this . script is supplied arguments, we save the dollar vars and
+   replace them with the script arguments for the duration of the script's
+   execution.  If the script does not change the dollar vars, we restore
+   what we saved.  If the dollar vars are changed in the script, and we are
+   not executing a shell function, we leave the new values alone and free
+   the saved values. */
+static void
+maybe_pop_dollar_vars ()
+{
+  if (variable_context == 0 && (dollar_vars_changed () & ARGS_SETBLTIN))
+    dispose_saved_dollar_vars ();
+  else
+    pop_dollar_vars ();
+  if (debugging_mode)
+    pop_args ();	/* restore BASH_ARGC and BASH_ARGV */
+  set_dollar_vars_unchanged ();
+  invalidate_cached_quoted_dollar_at ();	/* just invalidate to be safe */
+}
+
+/* Read and execute commands from the file passed as argument.  Guess what.
+   This cannot be done in a subshell, since things like variable assignments
+   take place in there.  So, I open the file, place it into a large string,
+   close the file, and then execute the string. */
+int
+source_builtin (list)
+     WORD_LIST *list;
+{
+  int result;
+  char *filename, *debug_trap, *x;
+
+  if (no_options (list))
+    return (EX_USAGE);
+  list = loptend;
+
+  if (list == 0)
+    {
+      builtin_error (_("filename argument required"));
+      builtin_usage ();
+      return (EX_USAGE);
+    }
+
+#if defined (RESTRICTED_SHELL)
+  if (restricted && strchr (list->word->word, '/'))
+    {
+      sh_restricted (list->word->word);
+      return (EXECUTION_FAILURE);
+    }
+#endif
+
+  filename = (char *)NULL;
+  /* XXX -- should this be absolute_pathname? */
+  if (posixly_correct && strchr (list->word->word, '/'))
+    filename = savestring (list->word->word);
+  else if (absolute_pathname (list->word->word))
+    filename = savestring (list->word->word);
+  else if (source_uses_path)
+    filename = find_path_file (list->word->word);
+  if (filename == 0)
+    {
+      if (source_searches_cwd == 0)
+	{
+	  x = printable_filename (list->word->word, 0);
+	  builtin_error (_("%s: file not found"), x);
+	  if (x != list->word->word)
+	    free (x);
+	  if (posixly_correct && interactive_shell == 0 && executing_command_builtin == 0)
+	    {
+	      last_command_exit_value = EXECUTION_FAILURE;
+	      jump_to_top_level (EXITPROG);
+	    }
+	  return (EXECUTION_FAILURE);
+	}
+      else
+	filename = savestring (list->word->word);
+    }
+
+  begin_unwind_frame ("source");
+  add_unwind_protect (xfree, filename);
+
+  if (list->next)
+    {
+      push_dollar_vars ();
+      add_unwind_protect ((Function *)maybe_pop_dollar_vars, (char *)NULL);
+      if (debugging_mode || shell_compatibility_level <= 44)
+	init_bash_argv ();	/* Initialize BASH_ARGV and BASH_ARGC */
+      remember_args (list->next, 1);
+      if (debugging_mode)
+	push_args (list->next);	/* Update BASH_ARGV and BASH_ARGC */
+    }
+  set_dollar_vars_unchanged ();
+
+  /* Don't inherit the DEBUG trap unless function_trace_mode (overloaded)
+     is set.  XXX - should sourced files inherit the RETURN trap?  Functions
+     don't. */
+  debug_trap = TRAP_STRING (DEBUG_TRAP);
+  if (debug_trap && function_trace_mode == 0)
+    {
+      debug_trap = savestring (debug_trap);
+      add_unwind_protect (xfree, debug_trap);
+      add_unwind_protect (maybe_set_debug_trap, debug_trap);
+      restore_default_signal (DEBUG_TRAP);
+    }
+
+  result = source_file (filename, (list && list->next));
+
+  run_unwind_frame ("source");
+
+  return (result);
+}
diff --git a/builtins/suspend.def b/builtins/suspend.def
new file mode 100644
index 0000000..e99fd26
--- /dev/null
+++ b/builtins/suspend.def
@@ -0,0 +1,128 @@
+This file is suspend.def, from which is created suspend.c.
+It implements the builtin "suspend" in Bash.
+
+Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES suspend.c
+
+$BUILTIN suspend
+$DEPENDS_ON JOB_CONTROL
+$FUNCTION suspend_builtin
+$SHORT_DOC suspend [-f]
+Suspend shell execution.
+
+Suspend the execution of this shell until it receives a SIGCONT signal.
+Unless forced, login shells cannot be suspended.
+
+Options:
+  -f	force the suspend, even if the shell is a login shell
+
+Exit Status:
+Returns success unless job control is not enabled or an error occurs.
+$END
+
+#include <config.h>
+
+#if defined (JOB_CONTROL)
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include "../bashtypes.h"
+#include <signal.h>
+#include "../bashintl.h"
+#include "../shell.h"
+#include "../jobs.h"
+#include "common.h"
+#include "bashgetopt.h"
+
+static sighandler suspend_continue PARAMS((int));
+
+static SigHandler *old_cont;
+#if 0
+static SigHandler *old_stop;
+#endif
+
+/* Continue handler. */
+static sighandler
+suspend_continue (sig)
+     int sig;
+{
+  set_signal_handler (SIGCONT, old_cont);
+#if 0
+  set_signal_handler (SIGSTOP, old_stop);
+#endif
+  SIGRETURN (0);
+}
+
+/* Suspending the shell.  If -f is the arg, then do the suspend
+   no matter what.  Otherwise, complain if a login shell. */
+int
+suspend_builtin (list)
+     WORD_LIST *list;
+{
+  int opt, force;
+
+  reset_internal_getopt ();
+  force = 0;
+  while ((opt = internal_getopt (list, "f")) != -1)
+    switch (opt)
+      {
+      case 'f':
+	force++;
+	break;
+      CASE_HELPOPT;
+      default:
+	builtin_usage ();
+	return (EX_USAGE);
+      }
+      
+  list = loptend;
+
+  if (job_control == 0)
+    {
+      sh_nojobs (_("cannot suspend"));
+      return (EXECUTION_FAILURE);
+    }
+
+  if (force == 0)  
+    {
+      no_args (list);
+
+      if (login_shell)
+	{
+	  builtin_error (_("cannot suspend a login shell"));
+	  return (EXECUTION_FAILURE);
+	}
+    }
+
+  /* XXX - should we put ourselves back into the original pgrp now?  If so,
+     call end_job_control() here and do the right thing in suspend_continue
+     (that is, call restart_job_control()). */
+  old_cont = (SigHandler *)set_signal_handler (SIGCONT, suspend_continue);
+#if 0
+  old_stop = (SigHandler *)set_signal_handler (SIGSTOP, SIG_DFL);
+#endif
+  killpg (shell_pgrp, SIGSTOP);
+  return (EXECUTION_SUCCESS);
+}
+
+#endif /* JOB_CONTROL */
diff --git a/builtins/test.def b/builtins/test.def
new file mode 100644
index 0000000..bd9a203
--- /dev/null
+++ b/builtins/test.def
@@ -0,0 +1,159 @@
+This file is test.def, from which is created test.c.
+It implements the builtin "test" in Bash.
+
+Copyright (C) 1987-2015 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES test.c
+
+$BUILTIN test
+$FUNCTION test_builtin
+$SHORT_DOC test [expr]
+Evaluate conditional expression.
+
+Exits with a status of 0 (true) or 1 (false) depending on
+the evaluation of EXPR.  Expressions may be unary or binary.  Unary
+expressions are often used to examine the status of a file.  There
+are string operators and numeric comparison operators as well.
+
+The behavior of test depends on the number of arguments.  Read the
+bash manual page for the complete specification.
+
+File operators:
+
+  -a FILE        True if file exists.
+  -b FILE        True if file is block special.
+  -c FILE        True if file is character special.
+  -d FILE        True if file is a directory.
+  -e FILE        True if file exists.
+  -f FILE        True if file exists and is a regular file.
+  -g FILE        True if file is set-group-id.
+  -h FILE        True if file is a symbolic link.
+  -L FILE        True if file is a symbolic link.
+  -k FILE        True if file has its `sticky' bit set.
+  -p FILE        True if file is a named pipe.
+  -r FILE        True if file is readable by you.
+  -s FILE        True if file exists and is not empty.
+  -S FILE        True if file is a socket.
+  -t FD          True if FD is opened on a terminal.
+  -u FILE        True if the file is set-user-id.
+  -w FILE        True if the file is writable by you.
+  -x FILE        True if the file is executable by you.
+  -O FILE        True if the file is effectively owned by you.
+  -G FILE        True if the file is effectively owned by your group.
+  -N FILE        True if the file has been modified since it was last read.
+
+  FILE1 -nt FILE2  True if file1 is newer than file2 (according to
+                   modification date).
+
+  FILE1 -ot FILE2  True if file1 is older than file2.
+
+  FILE1 -ef FILE2  True if file1 is a hard link to file2.
+
+String operators:
+
+  -z STRING      True if string is empty.
+
+  -n STRING
+     STRING      True if string is not empty.
+
+  STRING1 = STRING2
+                 True if the strings are equal.
+  STRING1 != STRING2
+                 True if the strings are not equal.
+  STRING1 < STRING2
+                 True if STRING1 sorts before STRING2 lexicographically.
+  STRING1 > STRING2
+                 True if STRING1 sorts after STRING2 lexicographically.
+
+Other operators:
+
+  -o OPTION      True if the shell option OPTION is enabled.
+  -v VAR         True if the shell variable VAR is set.
+  -R VAR         True if the shell variable VAR is set and is a name
+                 reference.
+  ! EXPR         True if expr is false.
+  EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.
+  EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.
+
+  arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,
+                 -lt, -le, -gt, or -ge.
+
+Arithmetic binary operators return true if ARG1 is equal, not-equal,
+less-than, less-than-or-equal, greater-than, or greater-than-or-equal
+than ARG2.
+
+Exit Status:
+Returns success if EXPR evaluates to true; fails if EXPR evaluates to
+false or an invalid argument is given.
+$END
+
+$BUILTIN [
+$DOCNAME test_bracket
+$FUNCTION test_builtin
+$SHORT_DOC [ arg... ]
+Evaluate conditional expression.
+
+This is a synonym for the "test" builtin, but the last argument must
+be a literal `]', to match the opening `['.
+$END
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include "../bashansi.h"
+#include "../bashintl.h"
+
+#include "../shell.h"
+#include "../execute_cmd.h"
+#include "../test.h"
+#include "common.h"
+
+/* TEST/[ builtin. */
+int
+test_builtin (list)
+     WORD_LIST *list;
+{
+  char **argv;
+  int argc, result;
+
+  /* We let Matthew Bradburn and Kevin Braunsdorf's code do the
+     actual test command.  So turn the list of args into an array
+     of strings, since that is what their code wants. */
+  if (list == 0)
+    {
+      if (this_command_name[0] == '[' && !this_command_name[1])
+	{
+	  builtin_error (_("missing `]'"));
+	  return (EX_BADUSAGE);
+	}
+
+      return (EXECUTION_FAILURE);
+    }
+
+  argv = make_builtin_argv  (list, &argc);
+  result = test_command (argc, argv);
+  free ((char *)argv);
+
+  return (result);
+}
diff --git a/builtins/times.def b/builtins/times.def
new file mode 100644
index 0000000..f31f433
--- /dev/null
+++ b/builtins/times.def
@@ -0,0 +1,119 @@
+This file is times.def, from which is created times.c.
+It implements the builtin "times" in Bash.
+
+Copyright (C) 1987-2009 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES times.c
+
+$BUILTIN times
+$FUNCTION times_builtin
+$SHORT_DOC times
+Display process times.
+
+Prints the accumulated user and system times for the shell and all of its
+child processes.
+
+Exit Status:
+Always succeeds.
+$END
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include "../bashtypes.h"
+#include "../shell.h"
+
+#include <posixtime.h>
+
+#if defined (HAVE_SYS_TIMES_H)
+#  include <sys/times.h>
+#endif /* HAVE_SYS_TIMES_H */
+
+#if defined (HAVE_SYS_RESOURCE_H) && !defined (RLIMTYPE)
+#  include <sys/resource.h>
+#endif
+
+#include "common.h"
+
+/* Print the totals for system and user time used. */
+int
+times_builtin (list)
+     WORD_LIST *list;
+{
+#if defined (HAVE_GETRUSAGE) && defined (HAVE_TIMEVAL) && defined (RUSAGE_SELF)
+  struct rusage self, kids;
+
+  USE_VAR(list);
+
+  if (no_options (list))
+    return (EX_USAGE);
+
+  getrusage (RUSAGE_SELF, &self);
+  getrusage (RUSAGE_CHILDREN, &kids);	/* terminated child processes */
+
+  print_timeval (stdout, &self.ru_utime);
+  putchar (' ');
+  print_timeval (stdout, &self.ru_stime);
+  putchar ('\n');
+  print_timeval (stdout, &kids.ru_utime);
+  putchar (' ');
+  print_timeval (stdout, &kids.ru_stime);
+  putchar ('\n');
+
+#else
+#  if defined (HAVE_TIMES)
+  /* This uses the POSIX.1/XPG5 times(2) interface, which fills in a 
+     `struct tms' with values of type clock_t. */
+  struct tms t;
+
+  USE_VAR(list);
+
+  if (no_options (list))
+    return (EX_USAGE);
+
+  times (&t);
+
+  print_clock_t (stdout, t.tms_utime);
+  putchar (' ');
+  print_clock_t (stdout, t.tms_stime);
+  putchar ('\n');
+  print_clock_t (stdout, t.tms_cutime);
+  putchar (' ');
+  print_clock_t (stdout, t.tms_cstime);
+  putchar ('\n');
+
+#  else /* !HAVE_TIMES */
+
+  USE_VAR(list);
+
+  if (no_options (list))
+    return (EX_USAGE);
+  printf ("0.00 0.00\n0.00 0.00\n");
+
+#  endif /* HAVE_TIMES */
+#endif /* !HAVE_TIMES */
+
+  return (sh_chkwrite (EXECUTION_SUCCESS));
+}
diff --git a/builtins/trap.def b/builtins/trap.def
new file mode 100644
index 0000000..daeec9e
--- /dev/null
+++ b/builtins/trap.def
@@ -0,0 +1,313 @@
+This file is trap.def, from which is created trap.c.
+It implements the builtin "trap" in Bash.
+
+Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES trap.c
+
+$BUILTIN trap
+$FUNCTION trap_builtin
+$SHORT_DOC trap [-lp] [[arg] signal_spec ...]
+Trap signals and other events.
+
+Defines and activates handlers to be run when the shell receives signals
+or other conditions.
+
+ARG is a command to be read and executed when the shell receives the
+signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC
+is supplied) or `-', each specified signal is reset to its original
+value.  If ARG is the null string each SIGNAL_SPEC is ignored by the
+shell and by the commands it invokes.
+
+If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  If
+a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  If
+a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or a
+script run by the . or source builtins finishes executing.  A SIGNAL_SPEC
+of ERR means to execute ARG each time a command's failure would cause the
+shell to exit when the -e option is enabled.
+
+If no arguments are supplied, trap prints the list of commands associated
+with each signal.
+
+Options:
+  -l	print a list of signal names and their corresponding numbers
+  -p	display the trap commands associated with each SIGNAL_SPEC
+
+Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal number.
+Signal names are case insensitive and the SIG prefix is optional.  A
+signal may be sent to the shell with "kill -signal $$".
+
+Exit Status:
+Returns success unless a SIGSPEC is invalid or an invalid option is given.
+$END
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include "../bashtypes.h"
+#include <signal.h>
+#include <stdio.h>
+#include "../bashansi.h"
+
+#include "../shell.h"
+#include "../trap.h"
+#include "common.h"
+#include "bashgetopt.h"
+
+static void showtrap PARAMS((int, int));
+static int display_traps PARAMS((WORD_LIST *, int));
+
+/* The trap command:
+
+   trap <arg> <signal ...>
+   trap <signal ...>
+   trap -l
+   trap -p [sigspec ...]
+   trap [--]
+
+   Set things up so that ARG is executed when SIGNAL(s) N is received.
+   If ARG is the empty string, then ignore the SIGNAL(s).  If there is
+   no ARG, then set the trap for SIGNAL(s) to its original value.  Just
+   plain "trap" means to print out the list of commands associated with
+   each signal number.  Single arg of "-l" means list the signal names. */
+
+/* Possible operations to perform on the list of signals.*/
+#define SET 0			/* Set this signal to first_arg. */
+#define REVERT 1		/* Revert to this signals original value. */
+#define IGNORE 2		/* Ignore this signal. */
+
+int
+trap_builtin (list)
+     WORD_LIST *list;
+{
+  int list_signal_names, display, result, opt;
+
+  list_signal_names = display = 0;
+  result = EXECUTION_SUCCESS;
+
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "lp")) != -1)
+    {
+      switch (opt)
+	{
+	case 'l':
+	  list_signal_names++;
+	  break;
+	case 'p':
+	  display++;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+  opt = DSIG_NOCASE|DSIG_SIGPREFIX;	/* flags for decode_signal */
+
+  if (list_signal_names)
+    return (sh_chkwrite (display_signal_list ((WORD_LIST *)NULL, 1)));
+  else if (display || list == 0)
+    {
+      initialize_terminating_signals ();
+      get_all_original_signals ();
+      return (sh_chkwrite (display_traps (list, display && posixly_correct)));
+    }
+  else
+    {
+      char *first_arg;
+      int operation, sig, first_signal;
+
+      operation = SET;
+      first_arg = list->word->word;
+      first_signal = first_arg && *first_arg && all_digits (first_arg) && signal_object_p (first_arg, opt);
+
+      /* Backwards compatibility.  XXX - question about whether or not we
+	 should throw an error if an all-digit argument doesn't correspond
+	 to a valid signal number (e.g., if it's `50' on a system with only
+	 32 signals).  */
+      if (first_signal)
+	operation = REVERT;
+      /* When in posix mode, the historical behavior of looking for a
+	 missing first argument is disabled.  To revert to the original
+	 signal handling disposition, use `-' as the first argument. */
+      else if (posixly_correct == 0 && first_arg && *first_arg &&
+		(*first_arg != '-' || first_arg[1]) &&
+		signal_object_p (first_arg, opt) && list->next == 0)
+	operation = REVERT;
+      else
+	{
+	  list = list->next;
+	  if (list == 0)
+	    {
+	      builtin_usage ();
+	      return (EX_USAGE);
+	    }
+	  else if (*first_arg == '\0')
+	    operation = IGNORE;
+	  else if (first_arg[0] == '-' && !first_arg[1])
+	    operation = REVERT;
+	}
+
+      /* If we're in a command substitution, we haven't freed the trap strings
+	 (though we reset the signal handlers).  If we're setting a trap to
+	 handle a signal here, free the rest of the trap strings since they
+	 don't apply any more. */
+      if (subshell_environment & SUBSHELL_RESETTRAP)
+	{
+	  free_trap_strings ();
+	  subshell_environment &= ~SUBSHELL_RESETTRAP;
+	}
+
+      while (list)
+	{
+	  sig = decode_signal (list->word->word, opt);
+
+	  if (sig == NO_SIG)
+	    {
+	      sh_invalidsig (list->word->word);
+	      result = EXECUTION_FAILURE;
+	    }
+	  else
+	    {
+	      switch (operation)
+		{
+		  case SET:
+		    set_signal (sig, first_arg);
+		    break;
+
+		  case REVERT:
+		    restore_default_signal (sig);
+
+		    /* Signals that the shell treats specially need special
+		       handling. */
+		    switch (sig)
+		      {
+		      case SIGINT:
+			/* XXX - should we do this if original disposition
+			   was SIG_IGN? */
+			if (interactive)
+			  set_signal_handler (SIGINT, sigint_sighandler);
+			/* special cases for interactive == 0 */
+			else if (interactive_shell && (sourcelevel||running_trap||parse_and_execute_level))
+			  set_signal_handler (SIGINT, sigint_sighandler);
+			else
+			  set_signal_handler (SIGINT, termsig_sighandler);
+			break;
+
+		      case SIGQUIT:
+			/* Always ignore SIGQUIT. */
+			set_signal_handler (SIGQUIT, SIG_IGN);
+			break;
+		      case SIGTERM:
+#if defined (JOB_CONTROL)
+		      case SIGTTIN:
+		      case SIGTTOU:
+		      case SIGTSTP:
+#endif /* JOB_CONTROL */
+			if (interactive)
+			  set_signal_handler (sig, SIG_IGN);
+			break;
+		      }
+		    break;
+
+		  case IGNORE:
+		    ignore_signal (sig);
+		    break;
+		}
+	    }
+	  list = list->next;
+	}
+    }
+
+  return (result);
+}
+
+static void
+showtrap (i, show_default)
+     int i, show_default;
+{
+  char *t, *p, *sn;
+
+  p = trap_list[i];
+  if (p == (char *)DEFAULT_SIG && signal_is_hard_ignored (i) == 0)
+    {
+      if (show_default)
+	t = "-";
+      else
+	return;
+    }
+  else if (signal_is_hard_ignored (i))
+    t = (char *)NULL;
+  else
+    t = (p == (char *)IGNORE_SIG) ? (char *)NULL : sh_single_quote (p);
+
+  sn = signal_name (i);
+  /* Make sure that signals whose names are unknown (for whatever reason)
+     are printed as signal numbers. */
+  if (STREQN (sn, "SIGJUNK", 7) || STREQN (sn, "unknown", 7))
+    printf ("trap -- %s %d\n", t ? t : "''", i);
+  else if (posixly_correct)
+    {
+      if (STREQN (sn, "SIG", 3))
+	printf ("trap -- %s %s\n", t ? t : "''", sn+3);
+      else
+	printf ("trap -- %s %s\n", t ? t : "''", sn);
+    }
+  else
+    printf ("trap -- %s %s\n", t ? t : "''", sn);
+
+  if (show_default == 0)
+    FREE (t);
+}
+
+static int
+display_traps (list, show_all)
+     WORD_LIST *list;
+     int show_all;
+{
+  int result, i;
+
+  if (list == 0)
+    {
+      for (i = 0; i < BASH_NSIG; i++)
+	showtrap (i, show_all);
+      return (EXECUTION_SUCCESS);
+    }
+
+  for (result = EXECUTION_SUCCESS; list; list = list->next)
+    {
+      i = decode_signal (list->word->word, DSIG_NOCASE|DSIG_SIGPREFIX);
+      if (i == NO_SIG)
+	{
+	  sh_invalidsig (list->word->word);
+	  result = EXECUTION_FAILURE;
+	}
+      else
+	showtrap (i, show_all);
+    }
+
+  return (result);
+}
diff --git a/builtins/type.def b/builtins/type.def
new file mode 100644
index 0000000..a8e47c0
--- /dev/null
+++ b/builtins/type.def
@@ -0,0 +1,420 @@
+This file is type.def, from which is created type.c.
+It implements the builtin "type" in Bash.
+
+Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES type.c
+
+$BUILTIN type
+$FUNCTION type_builtin
+$SHORT_DOC type [-afptP] name [name ...]
+Display information about command type.
+
+For each NAME, indicate how it would be interpreted if used as a
+command name.
+
+Options:
+  -a	display all locations containing an executable named NAME;
+		includes aliases, builtins, and functions, if and only if
+		the `-p' option is not also used
+  -f	suppress shell function lookup
+  -P	force a PATH search for each NAME, even if it is an alias,
+		builtin, or function, and returns the name of the disk file
+		that would be executed
+  -p	returns either the name of the disk file that would be executed,
+		or nothing if `type -t NAME' would not return `file'
+  -t	output a single word which is one of `alias', `keyword',
+		`function', `builtin', `file' or `', if NAME is an alias,
+		shell reserved word, shell function, shell builtin, disk file,
+		or not found, respectively
+
+Arguments:
+  NAME	Command name to be interpreted.
+
+Exit Status:
+Returns success if all of the NAMEs are found; fails if any are not found.
+$END
+
+#include <config.h>
+
+#include "../bashtypes.h"
+#include "posixstat.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include "../bashansi.h"
+#include "../bashintl.h"
+
+#include "../shell.h"
+#include "../parser.h"
+#include "../execute_cmd.h"
+#include "../findcmd.h"
+#include "../hashcmd.h"
+
+#if defined (ALIAS)
+#include "../alias.h"
+#endif /* ALIAS */
+
+#include "common.h"
+#include "bashgetopt.h"
+
+extern int find_reserved_word PARAMS((char *));
+
+/* For each word in LIST, find out what the shell is going to do with
+   it as a simple command. i.e., which file would this shell use to
+   execve, or if it is a builtin command, or an alias.  Possible flag
+   arguments:
+	-t		Returns the "type" of the object, one of
+			`alias', `keyword', `function', `builtin',
+			or `file'.
+
+	-p		Returns the pathname of the file if -type is
+			a file.
+
+	-a		Returns all occurrences of words, whether they
+			be a filename in the path, alias, function,
+			or builtin.
+
+	-f		Suppress shell function lookup, like `command'.
+
+	-P		Force a path search even in the presence of other
+			definitions.
+
+   Order of evaluation:
+	alias
+	keyword
+	function
+	builtin
+	file
+ */
+
+int
+type_builtin (list)
+     WORD_LIST *list;
+{
+  int dflags, any_failed, opt;
+  WORD_LIST *this;
+
+  if (list == 0)
+    return (EXECUTION_SUCCESS);
+
+  dflags = CDESC_SHORTDESC;	/* default */
+  any_failed = 0;
+
+  /* Handle the obsolescent `-type', `-path', and `-all' by prescanning
+     the arguments and converting those options to the form that
+     internal_getopt recognizes. Converts `--type', `--path', and `--all'
+     also. THIS SHOULD REALLY GO AWAY. */
+  for (this = list; this && this->word->word[0] == '-'; this = this->next)
+    {
+      char *flag = &(this->word->word[1]);
+
+      if (STREQ (flag, "type") || STREQ (flag, "-type"))
+	{
+	  this->word->word[1] = 't';
+	  this->word->word[2] = '\0';
+	}
+      else if (STREQ (flag, "path") || STREQ (flag, "-path"))
+	{
+	  this->word->word[1] = 'p';
+	  this->word->word[2] = '\0';
+	}
+      else if (STREQ (flag, "all") || STREQ (flag, "-all"))
+	{
+	  this->word->word[1] = 'a';
+	  this->word->word[2] = '\0';
+	}
+    }
+
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "afptP")) != -1)
+    {
+      switch (opt)
+	{
+	case 'a':
+	  dflags |= CDESC_ALL;
+	  break;
+	case 'f':
+	  dflags |= CDESC_NOFUNCS;
+	  break;
+	case 'p':
+	  dflags |= CDESC_PATH_ONLY;
+	  dflags &= ~(CDESC_TYPE|CDESC_SHORTDESC);
+	  break;
+	case 't':
+	  dflags |= CDESC_TYPE;
+	  dflags &= ~(CDESC_PATH_ONLY|CDESC_SHORTDESC);
+	  break;
+	case 'P':	/* shorthand for type -ap */
+	  dflags |= (CDESC_PATH_ONLY|CDESC_FORCE_PATH);
+	  dflags &= ~(CDESC_TYPE|CDESC_SHORTDESC);
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+  while (list)
+    {
+      int found;
+
+      found = describe_command (list->word->word, dflags);
+
+      if (!found && (dflags & (CDESC_PATH_ONLY|CDESC_TYPE)) == 0)
+	sh_notfound (list->word->word);
+
+      any_failed += found == 0;
+      list = list->next;
+    }
+
+  opt = (any_failed == 0) ? EXECUTION_SUCCESS : EXECUTION_FAILURE;
+  return (sh_chkwrite (opt));
+}
+
+/*
+ * Describe COMMAND as required by the type and command builtins.
+ *
+ * Behavior is controlled by DFLAGS.  Flag values are
+ *	CDESC_ALL	print all descriptions of a command
+ *	CDESC_SHORTDESC	print the description for type and command -V
+ *	CDESC_REUSABLE	print in a format that may be reused as input
+ *	CDESC_TYPE	print the type for type -t
+ *	CDESC_PATH_ONLY	print the path for type -p
+ *	CDESC_FORCE_PATH	force a path search for type -P
+ *	CDESC_NOFUNCS	skip function lookup for type -f
+ *	CDESC_ABSPATH	convert to absolute path, no ./ prefix
+ *	CDESC_STDPATH	command -p standard path list
+ *
+ * CDESC_ALL says whether or not to look for all occurrences of COMMAND, or
+ * return after finding it once.
+ */
+int
+describe_command (command, dflags)
+     char *command;
+     int dflags;
+{
+  int found, i, found_file, f, all;
+  char *full_path, *x, *pathlist;
+  SHELL_VAR *func;
+#if defined (ALIAS)
+  alias_t *alias;
+#endif
+
+  all = (dflags & CDESC_ALL) != 0;
+  found = found_file = 0;
+  full_path = (char *)NULL;
+
+#if defined (ALIAS)
+  /* Command is an alias? */
+  if (((dflags & CDESC_FORCE_PATH) == 0) && expand_aliases && (alias = find_alias (command)))
+    {
+      if (dflags & CDESC_TYPE)
+	puts ("alias");
+      else if (dflags & CDESC_SHORTDESC)
+	printf (_("%s is aliased to `%s'\n"), command, alias->value);
+      else if (dflags & CDESC_REUSABLE)
+	{
+	  x = sh_single_quote (alias->value);
+	  printf ("alias %s=%s\n", command, x);
+	  free (x);
+	}
+
+      found = 1;
+
+      if (all == 0)
+	return (1);
+    }
+#endif /* ALIAS */
+
+  /* Command is a shell reserved word? */
+  if (((dflags & CDESC_FORCE_PATH) == 0) && (i = find_reserved_word (command)) >= 0)
+    {
+      if (dflags & CDESC_TYPE)
+	puts ("keyword");
+      else if (dflags & CDESC_SHORTDESC)
+	printf (_("%s is a shell keyword\n"), command);
+      else if (dflags & CDESC_REUSABLE)
+	printf ("%s\n", command);
+
+      found = 1;
+
+      if (all == 0)
+	return (1);
+    }
+
+  /* Command is a function? */
+  if (((dflags & (CDESC_FORCE_PATH|CDESC_NOFUNCS)) == 0) && (func = find_function (command)))
+    {
+      if (dflags & CDESC_TYPE)
+	puts ("function");
+      else if (dflags & CDESC_SHORTDESC)
+	{
+	  char *result;
+
+	  printf (_("%s is a function\n"), command);
+
+	  /* We're blowing away THE_PRINTED_COMMAND here... */
+
+	  result = named_function_string (command, function_cell (func), FUNC_MULTILINE|FUNC_EXTERNAL);
+	  printf ("%s\n", result);
+	}
+      else if (dflags & CDESC_REUSABLE)
+	printf ("%s\n", command);
+
+      found = 1;
+
+      if (all == 0)
+	return (1);
+    }
+
+  /* Command is a builtin? */
+  if (((dflags & CDESC_FORCE_PATH) == 0) && find_shell_builtin (command))
+    {
+      if (dflags & CDESC_TYPE)
+	puts ("builtin");
+      else if (dflags & CDESC_SHORTDESC)
+	{
+	  if (posixly_correct && find_special_builtin (command) != 0)
+	    printf (_("%s is a special shell builtin\n"), command);
+	  else
+	    printf (_("%s is a shell builtin\n"), command);
+	}
+      else if (dflags & CDESC_REUSABLE)
+	printf ("%s\n", command);
+
+      found = 1;
+
+      if (all == 0)
+	return (1);
+    }
+
+  /* Command is a disk file? */
+  /* If the command name given is already an absolute command, just
+     check to see if it is executable. */
+  if (absolute_program (command))
+    {
+      f = file_status (command);
+      if (f & FS_EXECABLE)
+	{
+	  if (dflags & CDESC_TYPE)
+	    puts ("file");
+	  else if (dflags & CDESC_SHORTDESC)
+	    printf (_("%s is %s\n"), command, command);
+	  else if (dflags & (CDESC_REUSABLE|CDESC_PATH_ONLY))
+	    printf ("%s\n", command);
+
+	  /* There's no use looking in the hash table or in $PATH,
+	     because they're not consulted when an absolute program
+	     name is supplied. */
+	  return (1);
+	}
+    }
+
+  /* If the user isn't doing "-a", then we might care about
+     whether the file is present in our hash table. */
+  if (all == 0 || (dflags & CDESC_FORCE_PATH))
+    {
+      if (full_path = phash_search (command))
+	{
+	  if (dflags & CDESC_TYPE)
+	    puts ("file");
+	  else if (dflags & CDESC_SHORTDESC)
+	    printf (_("%s is hashed (%s)\n"), command, full_path);
+	  else if (dflags & (CDESC_REUSABLE|CDESC_PATH_ONLY))
+	    printf ("%s\n", full_path);
+
+	  free (full_path);
+	  return (1);
+	}
+    }
+
+  /* Now search through $PATH. */
+  while (1)
+    {
+      if (dflags & CDESC_STDPATH)	/* command -p, all cannot be non-zero */
+	{
+	  pathlist = conf_standard_path ();
+	  full_path = find_in_path (command, pathlist, FS_EXEC_PREFERRED|FS_NODIRS);
+	  free (pathlist);
+	  /* Will only go through this once, since all == 0 if STDPATH set */
+	}
+      else if (all == 0)
+	full_path = find_user_command (command);
+      else
+	full_path = user_command_matches (command, FS_EXEC_ONLY, found_file);	/* XXX - should that be FS_EXEC_PREFERRED? */
+
+      if (full_path == 0)
+	break;
+
+      /* If we found the command as itself by looking through $PATH, it
+	 probably doesn't exist.  Check whether or not the command is an
+	 executable file.  If it's not, don't report a match.  This is
+	 the default posix mode behavior */
+      if (STREQ (full_path, command) || posixly_correct)
+	{
+	  f = file_status (full_path);
+	  if ((f & FS_EXECABLE) == 0)
+	    {
+	      free (full_path);
+	      full_path = (char *)NULL;
+	      if (all == 0)
+		break;
+	    }
+	  else if (ABSPATH (full_path))
+	    ;	/* placeholder; don't need to do anything yet */
+	  else if (dflags & (CDESC_REUSABLE|CDESC_PATH_ONLY|CDESC_SHORTDESC))
+	    {
+	      f = MP_DOCWD | ((dflags & CDESC_ABSPATH) ? MP_RMDOT : 0);
+	      x = sh_makepath ((char *)NULL, full_path, f);
+	      free (full_path);
+	      full_path = x;
+	    }
+	}
+      /* If we require a full path and don't have one, make one */
+      else if ((dflags & CDESC_ABSPATH) && ABSPATH (full_path) == 0)
+	{
+	  x = sh_makepath ((char *)NULL, full_path, MP_DOCWD|MP_RMDOT);
+	  free (full_path);
+	  full_path = x;
+	}
+
+      found_file++;
+      found = 1;
+
+      if (dflags & CDESC_TYPE)
+	puts ("file");
+      else if (dflags & CDESC_SHORTDESC)
+	printf (_("%s is %s\n"), command, full_path);
+      else if (dflags & (CDESC_REUSABLE|CDESC_PATH_ONLY))
+	printf ("%s\n", full_path);
+
+      free (full_path);
+      full_path = (char *)NULL;
+
+      if (all == 0)
+	break;
+    }
+
+  return (found);
+}
diff --git a/builtins/ulimit.def b/builtins/ulimit.def
new file mode 100644
index 0000000..a895c5e
--- /dev/null
+++ b/builtins/ulimit.def
@@ -0,0 +1,800 @@
+This file is ulimit.def, from which is created ulimit.c.
+It implements the builtin "ulimit" in Bash.
+
+Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES ulimit.c
+
+$BUILTIN ulimit
+$FUNCTION ulimit_builtin
+$DEPENDS_ON !_MINIX
+$SHORT_DOC ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]
+Modify shell resource limits.
+
+Provides control over the resources available to the shell and processes
+it creates, on systems that allow such control.
+
+Options:
+  -S	use the `soft' resource limit
+  -H	use the `hard' resource limit
+  -a	all current limits are reported
+  -b	the socket buffer size
+  -c	the maximum size of core files created
+  -d	the maximum size of a process's data segment
+  -e	the maximum scheduling priority (`nice')
+  -f	the maximum size of files written by the shell and its children
+  -i	the maximum number of pending signals
+  -k	the maximum number of kqueues allocated for this process
+  -l	the maximum size a process may lock into memory
+  -m	the maximum resident set size
+  -n	the maximum number of open file descriptors
+  -p	the pipe buffer size
+  -q	the maximum number of bytes in POSIX message queues
+  -r	the maximum real-time scheduling priority
+  -s	the maximum stack size
+  -t	the maximum amount of cpu time in seconds
+  -u	the maximum number of user processes
+  -v	the size of virtual memory
+  -x	the maximum number of file locks
+  -P	the maximum number of pseudoterminals
+  -R	the maximum time a real-time process can run before blocking
+  -T	the maximum number of threads
+
+Not all options are available on all platforms.
+
+If LIMIT is given, it is the new value of the specified resource; the
+special LIMIT values `soft', `hard', and `unlimited' stand for the
+current soft limit, the current hard limit, and no limit, respectively.
+Otherwise, the current value of the specified resource is printed.  If
+no option is given, then -f is assumed.
+
+Values are in 1024-byte increments, except for -t, which is in seconds,
+-p, which is in increments of 512 bytes, and -u, which is an unscaled
+number of processes.
+
+Exit Status:
+Returns success unless an invalid option is supplied or an error occurs.
+$END
+
+#if !defined (_MINIX)
+
+#include <config.h>
+
+#include "../bashtypes.h"
+#if defined (HAVE_SYS_PARAM_H)
+#  include <sys/param.h>
+#endif
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+
+#include "../bashintl.h"
+
+#include "../shell.h"
+#include "common.h"
+#include "bashgetopt.h"
+#include "pipesize.h"
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+/* For some reason, HPUX chose to make these definitions visible only if
+   _KERNEL is defined, so we define _KERNEL before including <sys/resource.h>
+   and #undef it afterward. */
+#if defined (HAVE_RESOURCE)
+#  include <sys/time.h>
+#  if defined (HPUX) && defined (RLIMIT_NEEDS_KERNEL)
+#    define _KERNEL
+#  endif
+#  include <sys/resource.h>
+#  if defined (HPUX) && defined (RLIMIT_NEEDS_KERNEL)
+#    undef _KERNEL
+#  endif
+#elif defined (HAVE_SYS_TIMES_H)
+#  include <sys/times.h>
+#endif
+
+#if defined (HAVE_LIMITS_H)
+#  include <limits.h>
+#endif
+
+/* Check for the most basic symbols.  If they aren't present, this
+   system's <sys/resource.h> isn't very useful to us. */
+#if !defined (RLIMIT_FSIZE) || !defined (HAVE_GETRLIMIT)
+#  undef HAVE_RESOURCE
+#endif
+
+#if !defined (HAVE_RESOURCE) && defined (HAVE_ULIMIT_H)
+#  include <ulimit.h>
+#endif
+
+#if !defined (RLIMTYPE)
+#  define RLIMTYPE long
+#  define string_to_rlimtype(s) strtol(s, (char **)NULL, 10)
+#  define print_rlimtype(num, nl) printf ("%ld%s", num, nl ? "\n" : "")
+#endif
+
+/* Alternate names */
+
+/* Some systems use RLIMIT_NOFILE, others use RLIMIT_OFILE */
+#if defined (HAVE_RESOURCE) && defined (RLIMIT_OFILE) && !defined (RLIMIT_NOFILE)
+#  define RLIMIT_NOFILE RLIMIT_OFILE
+#endif /* HAVE_RESOURCE && RLIMIT_OFILE && !RLIMIT_NOFILE */
+
+#if defined (HAVE_RESOURCE) && defined (RLIMIT_POSIXLOCKS) && !defined (RLIMIT_LOCKS)
+#  define RLIMIT_LOCKS RLIMIT_POSIXLOCKS
+#endif /* HAVE_RESOURCE && RLIMIT_POSIXLOCKS && !RLIMIT_LOCKS */
+
+/* Some systems have these, some do not. */
+#ifdef RLIMIT_FSIZE
+#  define RLIMIT_FILESIZE	RLIMIT_FSIZE
+#else
+#  define RLIMIT_FILESIZE	256
+#endif
+
+#define RLIMIT_PIPESIZE	257
+
+#ifdef RLIMIT_NOFILE
+#  define RLIMIT_OPENFILES	RLIMIT_NOFILE
+#else
+#  define RLIMIT_OPENFILES	258
+#endif
+
+#ifdef RLIMIT_VMEM
+#  define RLIMIT_VIRTMEM	RLIMIT_VMEM
+#  define RLIMIT_VMBLKSZ	1024
+#else
+#  ifdef RLIMIT_AS
+#    define RLIMIT_VIRTMEM	RLIMIT_AS
+#    define RLIMIT_VMBLKSZ	1024
+#  else
+#    define RLIMIT_VIRTMEM	259
+#    define RLIMIT_VMBLKSZ	1
+#  endif
+#endif
+
+#ifdef RLIMIT_NPROC
+#  define RLIMIT_MAXUPROC	RLIMIT_NPROC
+#else
+#  define RLIMIT_MAXUPROC	260
+#endif
+
+#if !defined (RLIMIT_PTHREAD) && defined (RLIMIT_NTHR)
+#  define RLIMIT_PTHREAD RLIMIT_NTHR
+#endif
+
+#if !defined (RLIM_INFINITY)
+#  define RLIM_INFINITY 0x7fffffff
+#endif
+
+#if !defined (RLIM_SAVED_CUR)
+#  define RLIM_SAVED_CUR RLIM_INFINITY
+#endif
+
+#if !defined (RLIM_SAVED_MAX)
+#  define RLIM_SAVED_MAX RLIM_INFINITY
+#endif
+
+#define LIMIT_HARD 0x01
+#define LIMIT_SOFT 0x02
+
+/* "Blocks" are defined as 512 bytes when in Posix mode and 1024 bytes
+   otherwise. */
+#define POSIXBLK	-2
+
+#define BLOCKSIZE(x)	(((x) == POSIXBLK) ? (posixly_correct ? 512 : 1024) : (x))
+
+static int _findlim PARAMS((int));
+
+static int ulimit_internal PARAMS((int, char *, int, int));
+
+static int get_limit PARAMS((int, RLIMTYPE *, RLIMTYPE *));
+static int set_limit PARAMS((int, RLIMTYPE, int));
+
+static void printone PARAMS((int, RLIMTYPE, int));
+static void print_all_limits PARAMS((int));
+
+static int set_all_limits PARAMS((int, RLIMTYPE));
+
+static int filesize PARAMS((RLIMTYPE *));
+static int pipesize PARAMS((RLIMTYPE *));
+static int getmaxuprc PARAMS((RLIMTYPE *));
+static int getmaxvm PARAMS((RLIMTYPE *, RLIMTYPE *));
+
+typedef struct {
+  int  option;			/* The ulimit option for this limit. */
+  int  parameter;		/* Parameter to pass to get_limit (). */
+  int  block_factor;		/* Blocking factor for specific limit. */
+  const char * const description;	/* Descriptive string to output. */
+  const char * const units;	/* scale */
+} RESOURCE_LIMITS;
+
+static RESOURCE_LIMITS limits[] = {
+#ifdef RLIMIT_NPTS
+  { 'P',	RLIMIT_NPTS,  1,	"number of pseudoterminals",	(char *)NULL },
+#endif
+#ifdef RLIMIT_RTTIME
+  { 'R',	RLIMIT_RTTIME,  1,	"real-time non-blocking time",	"microseconds" },
+#endif
+#ifdef RLIMIT_PTHREAD
+  { 'T',	RLIMIT_PTHREAD, 1,	"number of threads",	(char *)NULL },
+#endif
+#ifdef RLIMIT_SBSIZE
+  { 'b',	RLIMIT_SBSIZE,  1,	"socket buffer size",	"bytes" },
+#endif
+#ifdef RLIMIT_CORE
+  { 'c',	RLIMIT_CORE,  POSIXBLK,	"core file size",	"blocks" },
+#endif
+#ifdef RLIMIT_DATA
+  { 'd',	RLIMIT_DATA,  1024,	"data seg size",	"kbytes" },
+#endif
+#ifdef RLIMIT_NICE
+  { 'e',	RLIMIT_NICE,  1,	"scheduling priority",	(char *)NULL },
+#endif
+  { 'f',	RLIMIT_FILESIZE, POSIXBLK,	"file size",		"blocks" },
+#ifdef RLIMIT_SIGPENDING
+  { 'i',	RLIMIT_SIGPENDING, 1,	"pending signals",	(char *)NULL },
+#endif
+#ifdef RLIMIT_KQUEUES
+  { 'k',	RLIMIT_KQUEUES, 1,	"max kqueues",		(char *)NULL },
+#endif
+#ifdef RLIMIT_MEMLOCK
+  { 'l',	RLIMIT_MEMLOCK, 1024,	"max locked memory",	"kbytes" },
+#endif
+#ifdef RLIMIT_RSS
+  { 'm',	RLIMIT_RSS,   1024,	"max memory size",	"kbytes" },
+#endif /* RLIMIT_RSS */
+  { 'n',	RLIMIT_OPENFILES, 1,	"open files",		(char *)NULL},
+  { 'p',	RLIMIT_PIPESIZE, 512,	"pipe size", 		"512 bytes" },
+#ifdef RLIMIT_MSGQUEUE
+  { 'q',	RLIMIT_MSGQUEUE, 1,	"POSIX message queues",	"bytes" },
+#endif
+#ifdef RLIMIT_RTPRIO
+  { 'r',	RLIMIT_RTPRIO,  1,	"real-time priority",	(char *)NULL },
+#endif
+#ifdef RLIMIT_STACK
+  { 's',	RLIMIT_STACK, 1024,	"stack size",		"kbytes" },
+#endif
+#ifdef RLIMIT_CPU
+  { 't',	RLIMIT_CPU,      1,	"cpu time",		"seconds" },
+#endif /* RLIMIT_CPU */
+  { 'u',	RLIMIT_MAXUPROC, 1,	"max user processes",	(char *)NULL },
+#if defined (HAVE_RESOURCE)
+  { 'v',	RLIMIT_VIRTMEM, RLIMIT_VMBLKSZ, "virtual memory", "kbytes" },
+#endif
+#ifdef RLIMIT_SWAP
+  { 'w',	RLIMIT_SWAP,	1024,	"swap size",		"kbytes" },
+#endif
+#ifdef RLIMIT_LOCKS
+  { 'x',	RLIMIT_LOCKS,	1,	"file locks",		(char *)NULL },
+#endif
+  { -1, -1, -1, (char *)NULL, (char *)NULL }
+};
+#define NCMDS	(sizeof(limits) / sizeof(limits[0]))
+
+typedef struct _cmd {
+  int cmd;
+  char *arg;
+} ULCMD;
+
+static ULCMD *cmdlist;
+static int ncmd;
+static int cmdlistsz;
+
+#if !defined (HAVE_RESOURCE) && !defined (HAVE_ULIMIT)
+long
+ulimit (cmd, newlim)
+     int cmd;
+     long newlim;
+{
+  errno = EINVAL;
+  return -1;
+}
+#endif /* !HAVE_RESOURCE && !HAVE_ULIMIT */
+
+static int
+_findlim (opt)
+     int opt;
+{
+  register int i;
+
+  for (i = 0; limits[i].option > 0; i++)
+    if (limits[i].option == opt)
+      return i;
+  return -1;
+}
+
+static char optstring[4 + 2 * NCMDS];
+
+/* Report or set limits associated with certain per-process resources.
+   See the help documentation in builtins.c for a full description. */
+int
+ulimit_builtin (list)
+     register WORD_LIST *list;
+{
+  register char *s;
+  int c, limind, mode, opt, all_limits;
+
+  mode = 0;
+
+  all_limits = 0;
+
+  /* Idea stolen from pdksh -- build option string the first time called. */
+  if (optstring[0] == 0)
+    {
+      s = optstring;
+      *s++ = 'a'; *s++ = 'S'; *s++ = 'H';
+      for (c = 0; limits[c].option > 0; c++)
+	{
+	  *s++ = limits[c].option;
+	  *s++ = ';';
+	}
+      *s = '\0';
+    }
+
+  /* Initialize the command list. */
+  if (cmdlistsz == 0)
+    cmdlist = (ULCMD *)xmalloc ((cmdlistsz = 16) * sizeof (ULCMD));
+  ncmd = 0;
+
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, optstring)) != -1)
+    {
+      switch (opt)
+	{
+	case 'a':
+	  all_limits++;
+	  break;
+
+	/* -S and -H are modifiers, not real options.  */
+	case 'S':
+	  mode |= LIMIT_SOFT;
+	  break;
+
+	case 'H':
+	  mode |= LIMIT_HARD;
+	  break;
+
+	CASE_HELPOPT;
+	case '?':
+	  builtin_usage ();
+	  return (EX_USAGE);
+
+	default:
+	  if (ncmd >= cmdlistsz)
+	    cmdlist = (ULCMD *)xrealloc (cmdlist, (cmdlistsz *= 2) * sizeof (ULCMD));
+	  cmdlist[ncmd].cmd = opt;
+	  cmdlist[ncmd++].arg = list_optarg;
+	  break;
+	}
+    }
+  list = loptend;
+
+  if (all_limits)
+    {
+#ifdef NOTYET
+      if (list)		/* setting */
+        {
+          if (STREQ (list->word->word, "unlimited") == 0)
+            {
+              builtin_error (_("%s: invalid limit argument"), list->word->word);
+              return (EXECUTION_FAILURE);
+            }
+          return (set_all_limits (mode == 0 ? LIMIT_SOFT|LIMIT_HARD : mode, RLIM_INFINITY));
+        }
+#endif
+      print_all_limits (mode == 0 ? LIMIT_SOFT : mode);
+      return (sh_chkwrite (EXECUTION_SUCCESS));
+    }
+
+  /* default is `ulimit -f' */
+  if (ncmd == 0)
+    {
+      cmdlist[ncmd].cmd = 'f';
+      /* `ulimit something' is same as `ulimit -f something' */
+      cmdlist[ncmd++].arg = list ? list->word->word : (char *)NULL;
+      if (list)
+	list = list->next;
+    }
+
+  /* verify each command in the list. */
+  for (c = 0; c < ncmd; c++)
+    {
+      limind = _findlim (cmdlist[c].cmd);
+      if (limind == -1)
+	{
+	  builtin_error (_("`%c': bad command"), cmdlist[c].cmd);
+	  return (EX_USAGE);
+	}
+    }
+
+  for (c = 0; c < ncmd; c++)
+    if (ulimit_internal (cmdlist[c].cmd, cmdlist[c].arg, mode, ncmd > 1) == EXECUTION_FAILURE)
+      return (EXECUTION_FAILURE);
+
+  return (EXECUTION_SUCCESS);
+}
+
+static int
+ulimit_internal (cmd, cmdarg, mode, multiple)
+     int cmd;
+     char *cmdarg;
+     int mode, multiple;
+{
+  int opt, limind, setting;
+  int block_factor;
+  RLIMTYPE soft_limit, hard_limit, real_limit, limit;
+
+  setting = cmdarg != 0;
+  limind = _findlim (cmd);
+  if (mode == 0)
+    mode = setting ? (LIMIT_HARD|LIMIT_SOFT) : LIMIT_SOFT;
+  opt = get_limit (limind, &soft_limit, &hard_limit);
+  if (opt < 0)
+    {
+      builtin_error (_("%s: cannot get limit: %s"), limits[limind].description,
+						 strerror (errno));
+      return (EXECUTION_FAILURE);
+    }
+
+  if (setting == 0)	/* print the value of the specified limit */
+    {
+      printone (limind, (mode & LIMIT_SOFT) ? soft_limit : hard_limit, multiple);
+      return (EXECUTION_SUCCESS);
+    }
+ 
+  /* Setting the limit. */
+  if (STREQ (cmdarg, "hard"))
+    real_limit = hard_limit;
+  else if (STREQ (cmdarg, "soft"))
+    real_limit = soft_limit;
+  else if (STREQ (cmdarg, "unlimited"))
+    real_limit = RLIM_INFINITY;
+  else if (all_digits (cmdarg))
+    {
+      limit = string_to_rlimtype (cmdarg);
+      block_factor = BLOCKSIZE(limits[limind].block_factor);
+      real_limit = limit * block_factor;
+
+      if ((real_limit / block_factor) != limit)
+	{
+	  sh_erange (cmdarg, _("limit"));
+	  return (EXECUTION_FAILURE);
+	}
+    }
+  else
+    {
+      sh_invalidnum (cmdarg);
+      return (EXECUTION_FAILURE);
+    }
+
+  if (set_limit (limind, real_limit, mode) < 0)
+    {
+      builtin_error (_("%s: cannot modify limit: %s"), limits[limind].description,
+						    strerror (errno));
+      return (EXECUTION_FAILURE);
+    }
+
+  return (EXECUTION_SUCCESS);
+}
+
+static int
+get_limit (ind, softlim, hardlim)
+     int ind;
+     RLIMTYPE *softlim, *hardlim;
+{
+  RLIMTYPE value;
+#if defined (HAVE_RESOURCE)
+  struct rlimit limit;
+#endif
+
+  if (limits[ind].parameter >= 256)
+    {
+      switch (limits[ind].parameter)
+	{
+	case RLIMIT_FILESIZE:
+	  if (filesize (&value) < 0)
+	    return -1;
+	  break;
+	case RLIMIT_PIPESIZE:
+	  if (pipesize (&value) < 0)
+	    return -1;
+	  break;
+	case RLIMIT_OPENFILES:
+	  value = (RLIMTYPE)getdtablesize ();
+	  break;
+	case RLIMIT_VIRTMEM:
+	  return (getmaxvm (softlim, hardlim));
+	case RLIMIT_MAXUPROC:
+	  if (getmaxuprc (&value) < 0)
+	    return -1;
+	  break;
+	default:
+	  errno = EINVAL;
+	  return -1;
+	}
+      *softlim = *hardlim = value;
+      return (0);
+    }
+  else
+    {
+#if defined (HAVE_RESOURCE)
+      if (getrlimit (limits[ind].parameter, &limit) < 0)
+	return -1;
+      *softlim = limit.rlim_cur;
+      *hardlim = limit.rlim_max;
+#  if defined (HPUX9)
+      if (limits[ind].parameter == RLIMIT_FILESIZE)
+	{
+	  *softlim *= 512;
+	  *hardlim *= 512;			/* Ugh. */
+	}
+      else
+#  endif /* HPUX9 */
+      return 0;
+#else
+      errno = EINVAL;
+      return -1;
+#endif
+    }
+}
+
+static int
+set_limit (ind, newlim, mode)
+     int ind;
+     RLIMTYPE newlim;
+     int mode;
+{
+#if defined (HAVE_RESOURCE)
+   struct rlimit limit;
+   RLIMTYPE val;
+#endif
+
+  if (limits[ind].parameter >= 256)
+    switch (limits[ind].parameter)
+      {
+      case RLIMIT_FILESIZE:
+#if !defined (HAVE_RESOURCE)
+	return (ulimit (2, newlim / 512L));
+#else
+	errno = EINVAL;
+	return -1;
+#endif
+
+      case RLIMIT_OPENFILES:
+#if defined (HAVE_SETDTABLESIZE)
+#  if defined (__CYGWIN__)
+	/* Grrr... Cygwin declares setdtablesize as void. */
+	setdtablesize (newlim);
+	return 0;
+#  else
+	return (setdtablesize (newlim));
+#  endif
+#endif
+      case RLIMIT_PIPESIZE:
+      case RLIMIT_VIRTMEM:
+      case RLIMIT_MAXUPROC:
+      default:
+	errno = EINVAL;
+	return -1;
+      }
+  else
+    {
+#if defined (HAVE_RESOURCE)
+      if (getrlimit (limits[ind].parameter, &limit) < 0)
+	return -1;
+#  if defined (HPUX9)
+      if (limits[ind].parameter == RLIMIT_FILESIZE)
+	newlim /= 512;				/* Ugh. */
+#  endif /* HPUX9 */
+      val = (current_user.euid != 0 && newlim == RLIM_INFINITY &&
+	       (mode & LIMIT_HARD) == 0 &&		/* XXX -- test */
+	       (limit.rlim_cur <= limit.rlim_max))
+		 ? limit.rlim_max : newlim;
+      if (mode & LIMIT_SOFT)
+	limit.rlim_cur = val;
+      if (mode & LIMIT_HARD)
+	limit.rlim_max = val;
+	  
+      return (setrlimit (limits[ind].parameter, &limit));
+#else
+      errno = EINVAL;
+      return -1;
+#endif
+    }
+}
+
+static int
+getmaxvm (softlim, hardlim)
+     RLIMTYPE *softlim, *hardlim;
+{
+#if defined (HAVE_RESOURCE)
+  struct rlimit datalim, stacklim;
+
+  if (getrlimit (RLIMIT_DATA, &datalim) < 0)
+    return -1;
+
+  if (getrlimit (RLIMIT_STACK, &stacklim) < 0)
+    return -1;
+
+  /* Protect against overflow. */
+  *softlim = (datalim.rlim_cur / 1024L) + (stacklim.rlim_cur / 1024L);
+  *hardlim = (datalim.rlim_max / 1024L) + (stacklim.rlim_max / 1024L);
+  return 0;
+#else
+  errno = EINVAL;
+  return -1;
+#endif /* HAVE_RESOURCE */
+}
+
+static int
+filesize(valuep)
+     RLIMTYPE *valuep;
+{
+#if !defined (HAVE_RESOURCE)
+  long result;
+  if ((result = ulimit (1, 0L)) < 0)
+    return -1;
+  else
+    *valuep = (RLIMTYPE) result * 512;
+  return 0;
+#else
+  errno = EINVAL;
+  return -1;
+#endif
+}
+
+static int
+pipesize (valuep)
+     RLIMTYPE *valuep;
+{
+#if defined (PIPE_BUF)
+  /* This is defined on Posix systems. */
+  *valuep = (RLIMTYPE) PIPE_BUF;
+  return 0;
+#else
+#  if defined (_POSIX_PIPE_BUF)
+  *valuep = (RLIMTYPE) _POSIX_PIPE_BUF;
+  return 0;
+#  else
+#    if defined (PIPESIZE)
+  /* This is defined by running a program from the Makefile. */
+  *valuep = (RLIMTYPE) PIPESIZE;
+  return 0;
+#    else
+  errno = EINVAL;
+  return -1;  
+#    endif /* PIPESIZE */
+#  endif /* _POSIX_PIPE_BUF */
+#endif /* PIPE_BUF */
+}
+
+static int
+getmaxuprc (valuep)
+     RLIMTYPE *valuep;
+{
+  long maxchild;
+
+  maxchild = getmaxchild ();
+  if (maxchild < 0)
+    {
+      errno = EINVAL;
+      return -1;
+    }
+  else
+    {
+      *valuep = (RLIMTYPE) maxchild;
+      return 0;
+    }
+}
+
+static void
+print_all_limits (mode)
+     int mode;
+{
+  register int i;
+  RLIMTYPE softlim, hardlim;
+
+  if (mode == 0)
+    mode |= LIMIT_SOFT;
+
+  for (i = 0; limits[i].option > 0; i++)
+    {
+      if (get_limit (i, &softlim, &hardlim) == 0)
+	printone (i, (mode & LIMIT_SOFT) ? softlim : hardlim, 1);
+      else if (errno != EINVAL)
+	builtin_error ("%s: cannot get limit: %s", limits[i].description,
+						   strerror (errno));
+    }
+}
+
+static void
+printone (limind, curlim, pdesc)
+     int limind;
+     RLIMTYPE curlim;
+     int pdesc;
+{
+  char unitstr[64];
+  int factor;
+
+  factor = BLOCKSIZE(limits[limind].block_factor);
+  if (pdesc)
+    {
+      if (limits[limind].units)
+	sprintf (unitstr, "(%s, -%c) ", limits[limind].units, limits[limind].option);
+      else
+        sprintf (unitstr, "(-%c) ", limits[limind].option);
+
+      printf ("%-20s %20s", limits[limind].description, unitstr);
+    }
+  if (curlim == RLIM_INFINITY)
+    puts ("unlimited");
+  else if (curlim == RLIM_SAVED_MAX)
+    puts ("hard");
+  else if (curlim == RLIM_SAVED_CUR)
+    puts ("soft");
+  else
+    print_rlimtype ((curlim / factor), 1);
+}
+
+/* Set all limits to NEWLIM.  NEWLIM currently must be RLIM_INFINITY, which
+   causes all limits to be set as high as possible depending on mode (like
+   csh `unlimit').  Returns -1 if NEWLIM is invalid, 0 if all limits
+   were set successfully, and 1 if at least one limit could not be set.
+
+   To raise all soft limits to their corresponding hard limits, use
+	ulimit -S -a unlimited
+   To attempt to raise all hard limits to infinity (superuser-only), use
+	ulimit -H -a unlimited
+   To attempt to raise all soft and hard limits to infinity, use
+	ulimit -a unlimited
+*/
+
+static int
+set_all_limits (mode, newlim)
+     int mode;
+     RLIMTYPE newlim;
+{
+  register int i;
+  int retval = 0;
+
+  if (newlim != RLIM_INFINITY)
+    {
+      errno = EINVAL;
+      return -1;
+    }
+  
+  if (mode == 0)
+    mode = LIMIT_SOFT|LIMIT_HARD;
+
+  for (retval = i = 0; limits[i].option > 0; i++)
+    if (set_limit (i, newlim, mode) < 0)
+      {
+	builtin_error (_("%s: cannot modify limit: %s"), limits[i].description,
+						      strerror (errno));
+	retval = 1;
+      }
+  return retval;
+}
+
+#endif /* !_MINIX */
diff --git a/builtins/umask.def b/builtins/umask.def
new file mode 100644
index 0000000..8041d56
--- /dev/null
+++ b/builtins/umask.def
@@ -0,0 +1,317 @@
+This file is umask.def, from which is created umask.c.
+It implements the builtin "umask" in Bash.
+
+Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$PRODUCES umask.c
+
+$BUILTIN umask
+$FUNCTION umask_builtin
+$SHORT_DOC umask [-p] [-S] [mode]
+Display or set file mode mask.
+
+Sets the user file-creation mask to MODE.  If MODE is omitted, prints
+the current value of the mask.
+
+If MODE begins with a digit, it is interpreted as an octal number;
+otherwise it is a symbolic mode string like that accepted by chmod(1).
+
+Options:
+  -p	if MODE is omitted, output in a form that may be reused as input
+  -S	makes the output symbolic; otherwise an octal number is output
+
+Exit Status:
+Returns success unless MODE is invalid or an invalid option is given.
+$END
+
+#include <config.h>
+
+#include "../bashtypes.h"
+#include "filecntl.h"
+#if ! defined(_MINIX) && defined (HAVE_SYS_FILE_H)
+#  include <sys/file.h>
+#endif
+
+#if defined (HAVE_UNISTD_H)
+#include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include <chartypes.h>
+
+#include "../bashintl.h"
+
+#include "../shell.h"
+#include "posixstat.h"
+#include "common.h"
+#include "bashgetopt.h"
+
+/* **************************************************************** */
+/*                                                                  */
+/*                     UMASK Builtin and Helpers                    */
+/*                                                                  */
+/* **************************************************************** */
+
+static void print_symbolic_umask PARAMS((mode_t));
+static int symbolic_umask PARAMS((WORD_LIST *));
+
+/* Set or display the mask used by the system when creating files.  Flag
+   of -S means display the umask in a symbolic mode. */
+int
+umask_builtin (list)
+     WORD_LIST *list;
+{
+  int print_symbolically, opt, umask_value, pflag;
+  mode_t umask_arg;
+
+  print_symbolically = pflag = 0;
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "Sp")) != -1)
+    {
+      switch (opt)
+	{
+	case 'S':
+	  print_symbolically++;
+	  break;
+	case 'p':
+	  pflag++;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+
+  list = loptend;
+
+  if (list)
+    {
+      if (DIGIT (*list->word->word))
+	{
+	  umask_value = read_octal (list->word->word);
+
+	  /* Note that other shells just let you set the umask to zero
+	     by specifying a number out of range.  This is a problem
+	     with those shells.  We don't change the umask if the input
+	     is lousy. */
+	  if (umask_value == -1)
+	    {
+	      sh_erange (list->word->word, _("octal number"));
+	      return (EXECUTION_FAILURE);
+	    }
+	}
+      else
+	{
+	  umask_value = symbolic_umask (list);
+	  if (umask_value == -1)
+	    return (EXECUTION_FAILURE);
+	}
+      umask_arg = (mode_t)umask_value;
+      umask (umask_arg);
+      if (print_symbolically)
+	print_symbolic_umask (umask_arg);
+    }
+  else				/* Display the UMASK for this user. */
+    {
+      umask_arg = umask (022);
+      umask (umask_arg);
+
+      if (pflag)
+	printf ("umask%s ", (print_symbolically ? " -S" : ""));
+      if (print_symbolically)
+	print_symbolic_umask (umask_arg);
+      else
+	printf ("%04lo\n", (unsigned long)umask_arg);
+    }
+
+  return (sh_chkwrite (EXECUTION_SUCCESS));
+}
+
+/* Print the umask in a symbolic form.  In the output, a letter is
+   printed if the corresponding bit is clear in the umask. */
+static void
+#if defined (__STDC__)
+print_symbolic_umask (mode_t um)
+#else
+print_symbolic_umask (um)
+     mode_t um;
+#endif
+{
+  char ubits[4], gbits[4], obits[4];		/* u=rwx,g=rwx,o=rwx */
+  int i;
+
+  i = 0;
+  if ((um & S_IRUSR) == 0)
+    ubits[i++] = 'r';
+  if ((um & S_IWUSR) == 0)
+    ubits[i++] = 'w';
+  if ((um & S_IXUSR) == 0)
+    ubits[i++] = 'x';
+  ubits[i] = '\0';
+
+  i = 0;
+  if ((um & S_IRGRP) == 0)
+    gbits[i++] = 'r';
+  if ((um & S_IWGRP) == 0)
+    gbits[i++] = 'w';
+  if ((um & S_IXGRP) == 0)
+    gbits[i++] = 'x';
+  gbits[i] = '\0';
+
+  i = 0;
+  if ((um & S_IROTH) == 0)
+    obits[i++] = 'r';
+  if ((um & S_IWOTH) == 0)
+    obits[i++] = 'w';
+  if ((um & S_IXOTH) == 0)
+    obits[i++] = 'x';
+  obits[i] = '\0';
+
+  printf ("u=%s,g=%s,o=%s\n", ubits, gbits, obits);
+}
+
+int
+parse_symbolic_mode (mode, initial_bits)
+     char *mode;
+     int initial_bits;
+{
+  int who, op, perm, bits, c;
+  char *s;
+
+  for (s = mode, bits = initial_bits;;)
+    {
+      who = op = perm = 0;
+
+      /* Parse the `who' portion of the symbolic mode clause. */
+      while (member (*s, "agou"))
+	{
+	  switch (c = *s++)
+	    {
+	    case 'u':
+	      who |= S_IRWXU;
+	      continue;
+	    case 'g':
+	      who |= S_IRWXG;
+	      continue;
+	    case 'o':
+	      who |= S_IRWXO;
+	      continue;
+	    case 'a':
+	      who |= S_IRWXU | S_IRWXG | S_IRWXO;
+	      continue;
+	    default:
+	      break;
+	    }
+	}
+
+      /* The operation is now sitting in *s. */
+      op = *s++;
+      switch (op)
+	{
+	case '+':
+	case '-':
+	case '=':
+	  break;
+	default:
+	  builtin_error (_("`%c': invalid symbolic mode operator"), op);
+	  return (-1);
+	}
+
+      /* Parse out the `perm' section of the symbolic mode clause. */
+      while (member (*s, "rwx"))
+	{
+	  c = *s++;
+
+	  switch (c)
+	    {
+	    case 'r':
+	      perm |= S_IRUGO;
+	      break;
+	    case 'w':
+	      perm |= S_IWUGO;
+	      break;
+	    case 'x':
+	      perm |= S_IXUGO;
+	      break;
+	    }
+	}
+
+      /* Now perform the operation or return an error for a
+	 bad permission string. */
+      if (!*s || *s == ',')
+	{
+	  if (who)
+	    perm &= who;
+
+	  switch (op)
+	    {
+	    case '+':
+	      bits |= perm;
+	      break;
+	    case '-':
+	      bits &= ~perm;
+	      break;
+	    case '=':
+	      if (who == 0)
+		who = S_IRWXU | S_IRWXG | S_IRWXO;
+	      bits &= ~who;
+	      bits |= perm;
+	      break;
+
+	    /* No other values are possible. */
+	    }
+
+	  if (*s == '\0')
+	    break;
+	  else
+	    s++;	/* skip past ',' */
+	}
+      else
+	{
+	  builtin_error (_("`%c': invalid symbolic mode character"), *s);
+	  return (-1);
+	}
+    }
+
+  return (bits);
+}
+
+/* Set the umask from a symbolic mode string similar to that accepted
+   by chmod.  If the -S argument is given, then print the umask in a
+   symbolic form. */
+static int
+symbolic_umask (list)
+     WORD_LIST *list;
+{
+  int um, bits;
+
+  /* Get the initial umask.  Don't change it yet. */
+  um = umask (022);
+  umask (um);
+
+  /* All work is done with the complement of the umask -- it's
+     more intuitive and easier to deal with.  It is complemented
+     again before being returned. */
+  bits = parse_symbolic_mode (list->word->word, ~um & 0777);
+  if (bits == -1)
+    return (-1);
+
+  um = ~bits & 0777;
+  return (um);
+}
diff --git a/builtins/wait.def b/builtins/wait.def
new file mode 100644
index 0000000..1226073
--- /dev/null
+++ b/builtins/wait.def
@@ -0,0 +1,364 @@
+This file is wait.def, from which is created wait.c.
+It implements the builtin "wait" in Bash.
+
+Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+Bash is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+
+$BUILTIN wait
+$FUNCTION wait_builtin
+$DEPENDS_ON JOB_CONTROL
+$PRODUCES wait.c
+$SHORT_DOC wait [-fn] [-p var] [id ...]
+Wait for job completion and return exit status.
+
+Waits for each process identified by an ID, which may be a process ID or a
+job specification, and reports its termination status.  If ID is not
+given, waits for all currently active child processes, and the return
+status is zero.  If ID is a job specification, waits for all processes
+in that job's pipeline.
+
+If the -n option is supplied, waits for a single job from the list of IDs,
+or, if no IDs are supplied, for the next job to complete and returns its
+exit status.
+
+If the -p option is supplied, the process or job identifier of the job
+for which the exit status is returned is assigned to the variable VAR
+named by the option argument. The variable will be unset initially, before
+any assignment. This is useful only when the -n option is supplied.
+
+If the -f option is supplied, and job control is enabled, waits for the
+specified ID to terminate, instead of waiting for it to change status.
+
+Exit Status:
+Returns the status of the last ID; fails if ID is invalid or an invalid
+option is given, or if -n is supplied and the shell has no unwaited-for
+children.
+$END
+
+$BUILTIN wait
+$FUNCTION wait_builtin
+$DEPENDS_ON !JOB_CONTROL
+$SHORT_DOC wait [pid ...]
+Wait for process completion and return exit status.
+
+Waits for each process specified by a PID and reports its termination status.
+If PID is not given, waits for all currently active child processes,
+and the return status is zero.  PID must be a process ID.
+
+Exit Status:
+Returns the status of the last PID; fails if PID is invalid or an invalid
+option is given.
+$END
+
+#include <config.h>
+
+#include "../bashtypes.h"
+#include <signal.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <chartypes.h>
+
+#include "../bashansi.h"
+
+#include "../shell.h"
+#include "../execute_cmd.h"
+#include "../jobs.h"
+#include "../trap.h"
+#include "../sig.h"
+#include "common.h"
+#include "bashgetopt.h"
+
+extern int wait_signal_received;
+
+procenv_t wait_intr_buf;
+int wait_intr_flag;
+
+static int set_waitlist PARAMS((WORD_LIST *));
+static void unset_waitlist PARAMS((void));
+
+/* Wait for the pid in LIST to stop or die.  If no arguments are given, then
+   wait for all of the active background processes of the shell and return
+   0.  If a list of pids or job specs are given, return the exit status of
+   the last one waited for. */
+
+#define WAIT_RETURN(s) \
+  do \
+    { \
+      wait_signal_received = 0; \
+      wait_intr_flag = 0; \
+      return (s);\
+    } \
+  while (0)
+
+int
+wait_builtin (list)
+     WORD_LIST *list;
+{
+  int status, code, opt, nflag, wflags;
+  char *vname;
+  SHELL_VAR *pidvar;
+  struct procstat pstat;
+
+  USE_VAR(list);
+
+  nflag = wflags = 0;
+  vname = NULL;
+  pidvar = (SHELL_VAR *)NULL;
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "fnp:")) != -1)
+    {
+      switch (opt)
+	{
+#if defined (JOB_CONTROL)
+	case 'n':
+	  nflag = 1;
+	  break;
+	case 'f':
+	  wflags |= JWAIT_FORCE;
+	  break;
+	case 'p':
+	  vname = list_optarg;
+	  break;	
+#endif
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+  /* Sanity-check variable name if -p supplied. */
+  if (vname)
+    {
+#if defined (ARRAY_VARS)
+      int arrayflags;
+
+      arrayflags = assoc_expand_once ? (VA_NOEXPAND|VA_ONEWORD) : 0;
+      if (legal_identifier (vname) == 0 && valid_array_reference (vname, arrayflags) == 0)
+#else
+      if (legal_identifier (vname) == 0)
+#endif
+	{
+	  sh_invalidid (vname);
+	  WAIT_RETURN (EXECUTION_FAILURE);
+	}
+      if (builtin_unbind_variable (vname) == -2)
+	WAIT_RETURN (EXECUTION_FAILURE);
+    }
+
+  /* POSIX.2 says:  When the shell is waiting (by means of the wait utility)
+     for asynchronous commands to complete, the reception of a signal for
+     which a trap has been set shall cause the wait utility to return
+     immediately with an exit status greater than 128, after which the trap
+     associated with the signal shall be taken.
+
+     We handle SIGINT here; it's the only one that needs to be treated
+     specially (I think), since it's handled specially in {no,}jobs.c. */
+  wait_intr_flag = 1;
+  code = setjmp_sigs (wait_intr_buf);
+
+  if (code)
+    {
+      last_command_exit_signal = wait_signal_received;
+      status = 128 + wait_signal_received;
+      wait_sigint_cleanup ();
+      WAIT_RETURN (status);
+    }
+
+  opt = first_pending_trap ();
+#if defined (SIGCHLD)
+  /* We special case SIGCHLD when not in posix mode because we don't break
+     out of the wait even when the signal is trapped; we run the trap after
+     the wait completes. See how it's handled in jobs.c:waitchld(). */
+  if (opt == SIGCHLD && posixly_correct == 0)
+    opt = next_pending_trap (opt+1);
+#endif
+  if (opt != -1)
+    {
+      last_command_exit_signal = wait_signal_received = opt;
+      status = opt + 128;
+      WAIT_RETURN (status);
+    }
+
+  /* We support jobs or pids.
+     wait <pid-or-job> [pid-or-job ...] */
+
+#if defined (JOB_CONTROL)
+  if (nflag)
+    {
+      if (list)
+	{
+	  opt = set_waitlist (list);
+	  if (opt == 0)
+	    WAIT_RETURN (127);
+	  wflags |= JWAIT_WAITING;
+	}
+
+      status = wait_for_any_job (wflags, &pstat);
+      if (status < 0)
+	status = 127;
+
+      if (vname && status >= 0)
+	bind_var_to_int (vname, pstat.pid);
+      if (list)
+	unset_waitlist ();
+      WAIT_RETURN (status);
+    }
+#endif
+      
+  /* But wait without any arguments means to wait for all of the shell's
+     currently active background processes. */
+  if (list == 0)
+    {
+      wait_for_background_pids (&pstat);
+      if (vname)
+	bind_var_to_int (vname, pstat.pid);
+      WAIT_RETURN (EXECUTION_SUCCESS);
+    }
+
+  status = EXECUTION_SUCCESS;
+  while (list)
+    {
+      pid_t pid;
+      char *w;
+      intmax_t pid_value;
+
+      w = list->word->word;
+      if (DIGIT (*w))
+	{
+	  if (legal_number (w, &pid_value) && pid_value == (pid_t)pid_value)
+	    {
+	      pid = (pid_t)pid_value;
+	      status = wait_for_single_pid (pid, wflags|JWAIT_PERROR);
+	      pstat.pid = pid;
+	      pstat.status = status;
+	    }
+	  else
+	    {
+	      sh_badpid (w);
+	      pstat.pid = NO_PID;
+	      pstat.status = 127;
+	      WAIT_RETURN (EXECUTION_FAILURE);
+	    }
+	}
+#if defined (JOB_CONTROL)
+      else if (*w && *w == '%')
+	/* Must be a job spec.  Check it out. */
+	{
+	  int job;
+	  sigset_t set, oset;
+
+	  BLOCK_CHILD (set, oset);
+	  job = get_job_spec (list);
+
+	  if (INVALID_JOB (job))
+	    {
+	      if (job != DUP_JOB)
+		sh_badjob (list->word->word);
+	      UNBLOCK_CHILD (oset);
+	      status = 127;	/* As per Posix.2, section 4.70.2 */
+	      pstat.pid = NO_PID;
+	      pstat.status = status;
+	      list = list->next;
+	      continue;
+	    }
+
+	  /* Job spec used.  Wait for the last pid in the pipeline. */
+	  UNBLOCK_CHILD (oset);
+	  status = wait_for_job (job, wflags, &pstat);
+	}
+#endif /* JOB_CONTROL */
+      else
+	{
+	  sh_badpid (w);
+	  pstat.pid = NO_PID;
+	  pstat.status = 127;
+	  status = EXECUTION_FAILURE;
+	}
+
+      /* Don't waste time with a longjmp. */
+      if (wait_signal_received)
+	{
+	  last_command_exit_signal = wait_signal_received;
+	  status = 128 + wait_signal_received;
+	  wait_sigint_cleanup ();
+	  WAIT_RETURN (status);
+	}
+
+      list = list->next;
+    }
+
+  WAIT_RETURN (status);
+}
+
+#if defined (JOB_CONTROL)
+/* Take each valid pid or jobspec in LIST and mark the corresponding job as
+   J_WAITING, so wait -n knows which jobs to wait for. Return the number of
+   jobs we found. */
+static int
+set_waitlist (list)
+     WORD_LIST *list;
+{
+  sigset_t set, oset;
+  int job, r, njob;
+  intmax_t pid;
+  WORD_LIST *l;
+
+  BLOCK_CHILD (set, oset);
+  njob = 0;
+  for (l = list; l; l = l->next)
+    {
+      job = NO_JOB;
+      job = (l && legal_number (l->word->word, &pid) && pid == (pid_t) pid)
+		? get_job_by_pid ((pid_t) pid, 0, 0)
+		: get_job_spec (l);
+      if (job == NO_JOB || jobs == 0 || INVALID_JOB (job))
+	{
+	  sh_badjob (l->word->word);
+	  continue;
+	}
+      /* We don't check yet to see if one of the desired jobs has already
+	 terminated, but we could. We wait until wait_for_any_job(). This
+	 has the advantage of validating all the arguments. */
+      if ((jobs[job]->flags & J_WAITING) == 0)
+	{
+	  njob++;
+	  jobs[job]->flags |= J_WAITING;
+	}
+    }
+  UNBLOCK_CHILD (oset);
+  return (njob);
+}
+
+/* Clean up after a call to wait -n jobs */
+static void
+unset_waitlist ()
+{
+  int i;
+  sigset_t set, oset;
+
+  BLOCK_CHILD (set, oset);
+  for (i = 0; i < js.j_jobslots; i++)
+    if (jobs[i] && (jobs[i]->flags & J_WAITING))
+      jobs[i]->flags &= ~J_WAITING;
+  UNBLOCK_CHILD (oset);
+}
+#endif
diff --git a/command.h b/command.h
new file mode 100644
index 0000000..914198f
--- /dev/null
+++ b/command.h
@@ -0,0 +1,408 @@
+/* command.h -- The structures used internally to represent commands, and
+   the extern declarations of the functions used to create them. */
+
+/* Copyright (C) 1993-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_COMMAND_H_)
+#define _COMMAND_H_
+
+#include "stdc.h"
+
+/* Instructions describing what kind of thing to do for a redirection. */
+enum r_instruction {
+  r_output_direction, r_input_direction, r_inputa_direction,
+  r_appending_to, r_reading_until, r_reading_string,
+  r_duplicating_input, r_duplicating_output, r_deblank_reading_until,
+  r_close_this, r_err_and_out, r_input_output, r_output_force,
+  r_duplicating_input_word, r_duplicating_output_word,
+  r_move_input, r_move_output, r_move_input_word, r_move_output_word,
+  r_append_err_and_out
+};
+
+/* Redirection flags; values for rflags */
+#define REDIR_VARASSIGN		0x01
+
+/* Redirection errors. */
+#define AMBIGUOUS_REDIRECT  -1
+#define NOCLOBBER_REDIRECT  -2
+#define RESTRICTED_REDIRECT -3	/* can only happen in restricted shells. */
+#define HEREDOC_REDIRECT    -4  /* here-doc temp file can't be created */
+#define BADVAR_REDIRECT	    -5  /* something wrong with {varname}redir */
+
+#define CLOBBERING_REDIRECT(ri) \
+  (ri == r_output_direction || ri == r_err_and_out)
+
+#define OUTPUT_REDIRECT(ri) \
+  (ri == r_output_direction || ri == r_input_output || ri == r_err_and_out || ri == r_append_err_and_out)
+
+#define INPUT_REDIRECT(ri) \
+  (ri == r_input_direction || ri == r_inputa_direction || ri == r_input_output)
+
+#define WRITE_REDIRECT(ri) \
+  (ri == r_output_direction || \
+	ri == r_input_output || \
+	ri == r_err_and_out || \
+	ri == r_appending_to || \
+	ri == r_append_err_and_out || \
+	ri == r_output_force)
+
+/* redirection needs translation */
+#define TRANSLATE_REDIRECT(ri) \
+  (ri == r_duplicating_input_word || ri == r_duplicating_output_word || \
+   ri == r_move_input_word || ri == r_move_output_word)
+
+/* Command Types: */
+enum command_type { cm_for, cm_case, cm_while, cm_if, cm_simple, cm_select,
+		    cm_connection, cm_function_def, cm_until, cm_group,
+		    cm_arith, cm_cond, cm_arith_for, cm_subshell, cm_coproc };
+
+/* Possible values for the `flags' field of a WORD_DESC. */
+#define W_HASDOLLAR	(1 << 0)	/* Dollar sign present. */
+#define W_QUOTED	(1 << 1)	/* Some form of quote character is present. */
+#define W_ASSIGNMENT	(1 << 2)	/* This word is a variable assignment. */
+#define W_SPLITSPACE	(1 << 3)	/* Split this word on " " regardless of IFS */
+#define W_NOSPLIT	(1 << 4)	/* Do not perform word splitting on this word because ifs is empty string. */
+#define W_NOGLOB	(1 << 5)	/* Do not perform globbing on this word. */
+#define W_NOSPLIT2	(1 << 6)	/* Don't split word except for $@ expansion (using spaces) because context does not allow it. */
+#define W_TILDEEXP	(1 << 7)	/* Tilde expand this assignment word */
+#define W_DOLLARAT	(1 << 8)	/* $@ and its special handling -- UNUSED */
+#define W_DOLLARSTAR	(1 << 9)	/* $* and its special handling -- UNUSED */
+#define W_NOCOMSUB	(1 << 10)	/* Don't perform command substitution on this word */
+#define W_ASSIGNRHS	(1 << 11)	/* Word is rhs of an assignment statement */
+#define W_NOTILDE	(1 << 12)	/* Don't perform tilde expansion on this word */
+#define W_ITILDE	(1 << 13)	/* Internal flag for word expansion */
+#define W_EXPANDRHS	(1 << 14)	/* Expanding word in ${paramOPword} */
+#define W_COMPASSIGN	(1 << 15)	/* Compound assignment */
+#define W_ASSNBLTIN	(1 << 16)	/* word is a builtin command that takes assignments */
+#define W_ASSIGNARG	(1 << 17)	/* word is assignment argument to command */
+#define W_HASQUOTEDNULL	(1 << 18)	/* word contains a quoted null character */
+#define W_DQUOTE	(1 << 19)	/* word should be treated as if double-quoted */
+#define W_NOPROCSUB	(1 << 20)	/* don't perform process substitution */
+#define W_SAWQUOTEDNULL	(1 << 21)	/* word contained a quoted null that was removed */
+#define W_ASSIGNASSOC	(1 << 22)	/* word looks like associative array assignment */
+#define W_ASSIGNARRAY	(1 << 23)	/* word looks like a compound indexed array assignment */
+#define W_ARRAYIND	(1 << 24)	/* word is an array index being expanded */
+#define W_ASSNGLOBAL	(1 << 25)	/* word is a global assignment to declare (declare/typeset -g) */
+#define W_NOBRACE	(1 << 26)	/* Don't perform brace expansion */
+#define W_COMPLETE	(1 << 27)	/* word is being expanded for completion */
+#define W_CHKLOCAL	(1 << 28)	/* check for local vars on assignment */
+#define W_NOASSNTILDE	(1 << 29)	/* don't do tilde expansion like an assignment statement */
+#define W_FORCELOCAL	(1 << 30)	/* force assignments to be to local variables, non-fatal on assignment errors */
+
+/* Flags for the `pflags' argument to param_expand() and various
+   parameter_brace_expand_xxx functions; also used for string_list_dollar_at */
+#define PF_NOCOMSUB	0x01	/* Do not perform command substitution */
+#define PF_IGNUNBOUND	0x02	/* ignore unbound vars even if -u set */
+#define PF_NOSPLIT2	0x04	/* same as W_NOSPLIT2 */
+#define PF_ASSIGNRHS	0x08	/* same as W_ASSIGNRHS */
+#define PF_COMPLETE	0x10	/* same as W_COMPLETE, sets SX_COMPLETE */
+#define PF_EXPANDRHS	0x20	/* same as W_EXPANDRHS */
+#define PF_ALLINDS	0x40	/* array, act as if [@] was supplied */
+
+/* Possible values for subshell_environment */
+#define SUBSHELL_ASYNC	0x01	/* subshell caused by `command &' */
+#define SUBSHELL_PAREN	0x02	/* subshell caused by ( ... ) */
+#define SUBSHELL_COMSUB	0x04	/* subshell caused by `command` or $(command) */
+#define SUBSHELL_FORK	0x08	/* subshell caused by executing a disk command */
+#define SUBSHELL_PIPE	0x10	/* subshell from a pipeline element */
+#define SUBSHELL_PROCSUB 0x20	/* subshell caused by <(command) or >(command) */
+#define SUBSHELL_COPROC	0x40	/* subshell from a coproc pipeline */
+#define SUBSHELL_RESETTRAP 0x80	/* subshell needs to reset trap strings on first call to trap */
+
+/* A structure which represents a word. */
+typedef struct word_desc {
+  char *word;		/* Zero terminated string. */
+  int flags;		/* Flags associated with this word. */
+} WORD_DESC;
+
+/* A linked list of words. */
+typedef struct word_list {
+  struct word_list *next;
+  WORD_DESC *word;
+} WORD_LIST;
+
+
+/* **************************************************************** */
+/*								    */
+/*			Shell Command Structs			    */
+/*								    */
+/* **************************************************************** */
+
+/* What a redirection descriptor looks like.  If the redirection instruction
+   is ri_duplicating_input or ri_duplicating_output, use DEST, otherwise
+   use the file in FILENAME.  Out-of-range descriptors are identified by a
+   negative DEST. */
+
+typedef union {
+  int dest;			/* Place to redirect REDIRECTOR to, or ... */
+  WORD_DESC *filename;		/* filename to redirect to. */
+} REDIRECTEE;
+
+/* Structure describing a redirection.  If REDIRECTOR is negative, the parser
+   (or translator in redir.c) encountered an out-of-range file descriptor. */
+typedef struct redirect {
+  struct redirect *next;	/* Next element, or NULL. */
+  REDIRECTEE redirector;	/* Descriptor or varname to be redirected. */
+  int rflags;			/* Private flags for this redirection */
+  int flags;			/* Flag value for `open'. */
+  enum r_instruction  instruction; /* What to do with the information. */
+  REDIRECTEE redirectee;	/* File descriptor or filename */
+  char *here_doc_eof;		/* The word that appeared in <<foo. */
+} REDIRECT;
+
+/* An element used in parsing.  A single word or a single redirection.
+   This is an ephemeral construct. */
+typedef struct element {
+  WORD_DESC *word;
+  REDIRECT *redirect;
+} ELEMENT;
+
+/* Possible values for command->flags. */
+#define CMD_WANT_SUBSHELL  0x01	/* User wants a subshell: ( command ) */
+#define CMD_FORCE_SUBSHELL 0x02	/* Shell needs to force a subshell. */
+#define CMD_INVERT_RETURN  0x04	/* Invert the exit value. */
+#define CMD_IGNORE_RETURN  0x08	/* Ignore the exit value.  For set -e. */
+#define CMD_NO_FUNCTIONS   0x10 /* Ignore functions during command lookup. */
+#define CMD_INHIBIT_EXPANSION 0x20 /* Do not expand the command words. */
+#define CMD_NO_FORK	   0x40	/* Don't fork; just call execve */
+#define CMD_TIME_PIPELINE  0x80 /* Time a pipeline */
+#define CMD_TIME_POSIX	   0x100 /* time -p; use POSIX.2 time output spec. */
+#define CMD_AMPERSAND	   0x200 /* command & */
+#define CMD_STDIN_REDIR	   0x400 /* async command needs implicit </dev/null */
+#define CMD_COMMAND_BUILTIN 0x0800 /* command executed by `command' builtin */
+#define CMD_COPROC_SUBSHELL 0x1000
+#define CMD_LASTPIPE	    0x2000
+#define CMD_STDPATH	    0x4000	/* use standard path for command lookup */
+#define CMD_TRY_OPTIMIZING  0x8000	/* try to optimize this simple command */
+
+/* What a command looks like. */
+typedef struct command {
+  enum command_type type;	/* FOR CASE WHILE IF CONNECTION or SIMPLE. */
+  int flags;			/* Flags controlling execution environment. */
+  int line;			/* line number the command starts on */
+  REDIRECT *redirects;		/* Special redirects for FOR CASE, etc. */
+  union {
+    struct for_com *For;
+    struct case_com *Case;
+    struct while_com *While;
+    struct if_com *If;
+    struct connection *Connection;
+    struct simple_com *Simple;
+    struct function_def *Function_def;
+    struct group_com *Group;
+#if defined (SELECT_COMMAND)
+    struct select_com *Select;
+#endif
+#if defined (DPAREN_ARITHMETIC)
+    struct arith_com *Arith;
+#endif
+#if defined (COND_COMMAND)
+    struct cond_com *Cond;
+#endif
+#if defined (ARITH_FOR_COMMAND)
+    struct arith_for_com *ArithFor;
+#endif
+    struct subshell_com *Subshell;
+    struct coproc_com *Coproc;
+  } value;
+} COMMAND;
+
+/* Structure used to represent the CONNECTION type. */
+typedef struct connection {
+  int ignore;			/* Unused; simplifies make_command (). */
+  COMMAND *first;		/* Pointer to the first command. */
+  COMMAND *second;		/* Pointer to the second command. */
+  int connector;		/* What separates this command from others. */
+} CONNECTION;
+
+/* Structures used to represent the CASE command. */
+
+/* Values for FLAGS word in a PATTERN_LIST */
+#define CASEPAT_FALLTHROUGH	0x01
+#define CASEPAT_TESTNEXT	0x02
+
+/* Pattern/action structure for CASE_COM. */
+typedef struct pattern_list {
+  struct pattern_list *next;	/* Clause to try in case this one failed. */
+  WORD_LIST *patterns;		/* Linked list of patterns to test. */
+  COMMAND *action;		/* Thing to execute if a pattern matches. */
+  int flags;
+} PATTERN_LIST;
+
+/* The CASE command. */
+typedef struct case_com {
+  int flags;			/* See description of CMD flags. */
+  int line;			/* line number the `case' keyword appears on */
+  WORD_DESC *word;		/* The thing to test. */
+  PATTERN_LIST *clauses;	/* The clauses to test against, or NULL. */
+} CASE_COM;
+
+/* FOR command. */
+typedef struct for_com {
+  int flags;		/* See description of CMD flags. */
+  int line;		/* line number the `for' keyword appears on */
+  WORD_DESC *name;	/* The variable name to get mapped over. */
+  WORD_LIST *map_list;	/* The things to map over.  This is never NULL. */
+  COMMAND *action;	/* The action to execute.
+			   During execution, NAME is bound to successive
+			   members of MAP_LIST. */
+} FOR_COM;
+
+#if defined (ARITH_FOR_COMMAND)
+typedef struct arith_for_com {
+  int flags;
+  int line;	/* generally used for error messages */
+  WORD_LIST *init;
+  WORD_LIST *test;
+  WORD_LIST *step;
+  COMMAND *action;
+} ARITH_FOR_COM;
+#endif
+
+#if defined (SELECT_COMMAND)
+/* KSH SELECT command. */
+typedef struct select_com {
+  int flags;		/* See description of CMD flags. */
+  int line;		/* line number the `select' keyword appears on */
+  WORD_DESC *name;	/* The variable name to get mapped over. */
+  WORD_LIST *map_list;	/* The things to map over.  This is never NULL. */
+  COMMAND *action;	/* The action to execute.
+			   During execution, NAME is bound to the member of
+			   MAP_LIST chosen by the user. */
+} SELECT_COM;
+#endif /* SELECT_COMMAND */
+
+/* IF command. */
+typedef struct if_com {
+  int flags;			/* See description of CMD flags. */
+  COMMAND *test;		/* Thing to test. */
+  COMMAND *true_case;		/* What to do if the test returned non-zero. */
+  COMMAND *false_case;		/* What to do if the test returned zero. */
+} IF_COM;
+
+/* WHILE command. */
+typedef struct while_com {
+  int flags;			/* See description of CMD flags. */
+  COMMAND *test;		/* Thing to test. */
+  COMMAND *action;		/* Thing to do while test is non-zero. */
+} WHILE_COM;
+
+#if defined (DPAREN_ARITHMETIC)
+/* The arithmetic evaluation command, ((...)).  Just a set of flags and
+   a WORD_LIST, of which the first element is the only one used, for the
+   time being. */
+typedef struct arith_com {
+  int flags;
+  int line;
+  WORD_LIST *exp;
+} ARITH_COM;
+#endif /* DPAREN_ARITHMETIC */
+
+/* The conditional command, [[...]].  This is a binary tree -- we slipped
+   a recursive-descent parser into the YACC grammar to parse it. */
+#define COND_AND	1
+#define COND_OR		2
+#define COND_UNARY	3
+#define COND_BINARY	4
+#define COND_TERM	5
+#define COND_EXPR	6
+
+typedef struct cond_com {
+  int flags;
+  int line;
+  int type;
+  WORD_DESC *op;
+  struct cond_com *left, *right;
+} COND_COM;
+
+/* The "simple" command.  Just a collection of words and redirects. */
+typedef struct simple_com {
+  int flags;			/* See description of CMD flags. */
+  int line;			/* line number the command starts on */
+  WORD_LIST *words;		/* The program name, the arguments,
+				   variable assignments, etc. */
+  REDIRECT *redirects;		/* Redirections to perform. */
+} SIMPLE_COM;
+
+/* The "function definition" command. */
+typedef struct function_def {
+  int flags;			/* See description of CMD flags. */
+  int line;			/* Line number the function def starts on. */
+  WORD_DESC *name;		/* The name of the function. */
+  COMMAND *command;		/* The parsed execution tree. */
+  char *source_file;		/* file in which function was defined, if any */
+} FUNCTION_DEF;
+
+/* A command that is `grouped' allows pipes and redirections to affect all
+   commands in the group. */
+typedef struct group_com {
+  int ignore;			/* See description of CMD flags. */
+  COMMAND *command;
+} GROUP_COM;
+
+typedef struct subshell_com {
+  int flags;
+  int line;
+  COMMAND *command;
+} SUBSHELL_COM;
+
+#define COPROC_RUNNING	0x01
+#define COPROC_DEAD	0x02
+
+typedef struct coproc {
+  char *c_name;
+  pid_t c_pid;
+  int c_rfd;
+  int c_wfd;
+  int c_rsave;
+  int c_wsave;
+  int c_flags;
+  int c_status;
+  int c_lock;
+} Coproc;
+
+typedef struct coproc_com {
+  int flags;
+  char *name;
+  COMMAND *command;
+} COPROC_COM;
+
+extern COMMAND *global_command;
+extern Coproc sh_coproc;
+
+/* Possible command errors */
+#define CMDERR_DEFAULT	0
+#define CMDERR_BADTYPE	1
+#define CMDERR_BADCONN	2
+#define CMDERR_BADJUMP	3
+
+#define CMDERR_LAST	3
+
+/* Forward declarations of functions declared in copy_cmd.c. */
+
+extern FUNCTION_DEF *copy_function_def_contents PARAMS((FUNCTION_DEF *, FUNCTION_DEF *));
+extern FUNCTION_DEF *copy_function_def PARAMS((FUNCTION_DEF *));
+
+extern WORD_DESC *copy_word PARAMS((WORD_DESC *));
+extern WORD_LIST *copy_word_list PARAMS((WORD_LIST *));
+extern REDIRECT *copy_redirect PARAMS((REDIRECT *));
+extern REDIRECT *copy_redirects PARAMS((REDIRECT *));
+extern COMMAND *copy_command PARAMS((COMMAND *));
+
+#endif /* _COMMAND_H_ */
diff --git a/config-bot.h b/config-bot.h
new file mode 100644
index 0000000..b075c77
--- /dev/null
+++ b/config-bot.h
@@ -0,0 +1,207 @@
+/* config-bot.h */
+/* modify settings or make new ones based on what autoconf tells us. */
+
+/* Copyright (C) 1989-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*********************************************************/
+/* Modify or set defines based on the configure results. */
+/*********************************************************/
+
+#if !defined (HAVE_VPRINTF) && defined (HAVE_DOPRNT)
+#  define USE_VFPRINTF_EMULATION
+#  define HAVE_VPRINTF
+#endif
+
+#if defined (HAVE_SYS_RESOURCE_H) && defined (HAVE_GETRLIMIT)
+#  define HAVE_RESOURCE
+#endif
+
+#if !defined (GETPGRP_VOID)
+#  define HAVE_BSD_PGRP
+#endif
+
+/* Try this without testing __STDC__ for the time being. */
+#if defined (HAVE_STDARG_H)
+#  define PREFER_STDARG
+#  define USE_VARARGS
+#else
+#  if defined (HAVE_VARARGS_H)
+#    define PREFER_VARARGS
+#    define USE_VARARGS
+#  endif
+#endif
+
+#if defined (HAVE_SYS_SOCKET_H) && defined (HAVE_GETPEERNAME) && defined (HAVE_NETINET_IN_H)
+#  define HAVE_NETWORK
+#endif
+
+#if defined (HAVE_REGEX_H) && defined (HAVE_REGCOMP) && defined (HAVE_REGEXEC)
+#  define HAVE_POSIX_REGEXP
+#endif
+
+/* backwards compatibility between different autoconf versions */
+#if HAVE_DECL_SYS_SIGLIST && !defined (SYS_SIGLIST_DECLARED)
+#  define SYS_SIGLIST_DECLARED
+#endif
+
+/***********************************************************************/
+/* Unset defines based on what configure reports as missing or broken. */
+/***********************************************************************/
+
+/* Ultrix botches type-ahead when switching from canonical to
+   non-canonical mode, at least through version 4.3 */
+#if !defined (HAVE_TERMIOS_H) || !defined (HAVE_TCGETATTR) || defined (ultrix)
+#  define TERMIOS_MISSING
+#endif
+
+/* If we have a getcwd(3), but one that does not dynamically allocate memory,
+   #undef HAVE_GETCWD so the replacement in getcwd.c will be built.  We do
+   not do this on Solaris, because their implementation of loopback mounts
+   breaks the traditional file system assumptions that getcwd uses. */
+#if defined (HAVE_GETCWD) && defined (GETCWD_BROKEN) && !defined (SOLARIS)
+#  undef HAVE_GETCWD
+#endif
+
+#if !defined (HAVE_DEV_FD) && defined (NAMED_PIPES_MISSING)
+#  undef PROCESS_SUBSTITUTION
+#endif
+
+#if defined (JOB_CONTROL_MISSING)
+#  undef JOB_CONTROL
+#endif
+
+#if defined (STRCOLL_BROKEN)
+#  undef HAVE_STRCOLL
+#endif
+
+#if !defined (HAVE_POSIX_REGEXP)
+#  undef COND_REGEXP
+#endif
+
+#if !HAVE_MKSTEMP
+#  undef USE_MKSTEMP
+#endif
+
+#if !HAVE_MKDTEMP
+#  undef USE_MKDTMP
+#endif
+
+/* If the shell is called by this name, it will become restricted. */
+#if defined (RESTRICTED_SHELL)
+#  define RESTRICTED_SHELL_NAME "rbash"
+#endif
+
+/***********************************************************/
+/* Make sure feature defines have necessary prerequisites. */
+/***********************************************************/
+
+/* BANG_HISTORY requires HISTORY. */
+#if defined (BANG_HISTORY) && !defined (HISTORY)
+#  define HISTORY
+#endif /* BANG_HISTORY && !HISTORY */
+
+#if defined (READLINE) && !defined (HISTORY)
+#  define HISTORY
+#endif
+
+#if defined (PROGRAMMABLE_COMPLETION) && !defined (READLINE)
+#  undef PROGRAMMABLE_COMPLETION
+#endif
+
+#if !defined (V9_ECHO)
+#  undef DEFAULT_ECHO_TO_XPG
+#endif
+
+#if !defined (PROMPT_STRING_DECODE)
+#  undef PPROMPT
+#  define PPROMPT "$ "
+#endif
+
+#if !defined (HAVE_SYSLOG) || !defined (HAVE_SYSLOG_H)
+#  undef SYSLOG_HISTORY
+#endif
+
+/************************************************/
+/* check multibyte capability for I18N code	*/
+/************************************************/
+
+/* For platforms which support the ISO C amendment 1 functionality we
+   support user defined character classes.  */
+/* Solaris 2.5 has a bug: <wchar.h> must be included before <wctype.h>.  */
+#if defined (HAVE_WCTYPE_H) && defined (HAVE_WCHAR_H) && defined (HAVE_LOCALE_H)
+#  include <wchar.h>
+#  include <wctype.h>
+#  if defined (HAVE_ISWCTYPE) && \
+      defined (HAVE_ISWLOWER) && \
+      defined (HAVE_ISWUPPER) && \
+      defined (HAVE_MBSRTOWCS) && \
+      defined (HAVE_MBRTOWC) && \
+      defined (HAVE_MBRLEN) && \
+      defined (HAVE_TOWLOWER) && \
+      defined (HAVE_TOWUPPER) && \
+      defined (HAVE_WCHAR_T) && \
+      defined (HAVE_WCTYPE_T) && \
+      defined (HAVE_WINT_T) && \
+      defined (HAVE_WCWIDTH) && \
+      defined (HAVE_WCTYPE)
+     /* system is supposed to support XPG5 */
+#    define HANDLE_MULTIBYTE      1
+#  endif
+#endif
+
+/* If we don't want multibyte chars even on a system that supports them, let
+   the configuring user turn multibyte support off. */
+#if defined (NO_MULTIBYTE_SUPPORT)
+#  undef HANDLE_MULTIBYTE
+#endif
+
+/* Some systems, like BeOS, have multibyte encodings but lack mbstate_t.  */
+#if HANDLE_MULTIBYTE && !defined (HAVE_MBSTATE_T)
+#  define wcsrtombs(dest, src, len, ps) (wcsrtombs) (dest, src, len, 0)
+#  define mbsrtowcs(dest, src, len, ps) (mbsrtowcs) (dest, src, len, 0)
+#  define wcrtomb(s, wc, ps) (wcrtomb) (s, wc, 0)
+#  define mbrtowc(pwc, s, n, ps) (mbrtowc) (pwc, s, n, 0)
+#  define mbrlen(s, n, ps) (mbrlen) (s, n, 0)
+#  define mbstate_t int
+#endif
+
+/* Make sure MB_LEN_MAX is at least 16 (some systems define
+   MB_LEN_MAX as 1) */
+#ifdef HANDLE_MULTIBYTE
+#  include <limits.h>
+#  if defined(MB_LEN_MAX) && (MB_LEN_MAX < 16)
+#    undef MB_LEN_MAX
+#  endif
+#  if !defined (MB_LEN_MAX)
+#    define MB_LEN_MAX 16
+#  endif
+#endif
+
+/************************************************/
+/* end of multibyte capability checks for I18N	*/
+/************************************************/
+
+/******************************************************************/
+/* Placeholder for builders to #undef any unwanted features from  */
+/* config-top.h or created by configure (such as the default mail */
+/* file for mail checking).					  */
+/******************************************************************/
+
+/* If you don't want bash to provide a default mail file to check. */
+/* #undef DEFAULT_MAIL_DIRECTORY */
diff --git a/config-top.h b/config-top.h
new file mode 100644
index 0000000..735f75e
--- /dev/null
+++ b/config-top.h
@@ -0,0 +1,195 @@
+/* config-top.h - various user-settable options not under the control of autoconf. */
+
+/* Copyright (C) 2002-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* Define CONTINUE_AFTER_KILL_ERROR if you want the kill command to
+   continue processing arguments after one of them fails.  This is
+   what POSIX.2 specifies. */
+#define CONTINUE_AFTER_KILL_ERROR
+
+/* Define BREAK_COMPLAINS if you want the non-standard, but useful
+   error messages about `break' and `continue' out of context. */
+#define BREAK_COMPLAINS
+
+/* Define CD_COMPLAINS if you want the non-standard, but sometimes-desired
+   error messages about multiple directory arguments to `cd'. */
+#define CD_COMPLAINS
+
+/* Define BUFFERED_INPUT if you want the shell to do its own input
+   buffering, rather than using stdio.  Do not undefine this; it's
+   required to preserve semantics required by POSIX. */
+#define BUFFERED_INPUT
+
+/* Define ONESHOT if you want sh -c 'command' to avoid forking to execute
+   `command' whenever possible.  This is a big efficiency improvement. */
+#define ONESHOT
+
+/* Define V9_ECHO if you want to give the echo builtin backslash-escape
+   interpretation using the -e option, in the style of the Bell Labs 9th
+   Edition version of echo.  You cannot emulate the System V echo behavior
+   without this option. */
+#define V9_ECHO
+
+/* Define DONT_REPORT_SIGPIPE if you don't want to see `Broken pipe' messages
+   when a job like `cat jobs.c | exit 1' terminates due to a SIGPIPE. */
+#define DONT_REPORT_SIGPIPE
+
+/* Define DONT_REPORT_SIGTERM if you don't want to see `Terminates' message
+   when a job exits due to SIGTERM, since that's the default signal sent
+   by the kill builtin. */
+#define DONT_REPORT_SIGTERM
+
+/* Define DONT_REPORT_BROKEN_PIPE_WRITE_ERRORS if you don't want builtins
+   like `echo' and `printf' to report errors when output does not succeed
+   due to EPIPE. */
+/* #define DONT_REPORT_BROKEN_PIPE_WRITE_ERRORS */
+
+/* The default value of the PATH variable. */
+#ifndef DEFAULT_PATH_VALUE
+#define DEFAULT_PATH_VALUE \
+  "/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin:."
+#endif
+
+/* If you want to unconditionally set a value for PATH in every restricted
+   shell, set this. */
+/* #define RBASH_STATIC_PATH_VALUE "/rbin:/usr/rbin" */
+
+/* The value for PATH when invoking `command -p'.  This is only used when
+   the Posix.2 confstr () function, or CS_PATH define are not present. */
+#ifndef STANDARD_UTILS_PATH
+#define STANDARD_UTILS_PATH \
+  "/bin:/usr/bin:/sbin:/usr/sbin:/etc:/usr/etc"
+#endif
+
+/* Default primary and secondary prompt strings. */
+#define PPROMPT "\\s-\\v\\$ "
+#define SPROMPT "> "
+
+/* Undefine this if you don't want the ksh-compatible behavior of reprinting
+   the select menu after a valid choice is made only if REPLY is set to NULL
+   in the body of the select command.  The menu is always reprinted if the
+   reply to the select query is an empty line. */
+#define KSH_COMPATIBLE_SELECT
+
+/* Default interactive shell startup file. */
+#define DEFAULT_BASHRC "~/.bashrc"
+
+/* System-wide .bashrc file for interactive shells. */
+/* #define SYS_BASHRC "/etc/bash.bashrc" */
+
+/* System-wide .bash_logout for login shells. */
+/* #define SYS_BASH_LOGOUT "/etc/bash.bash_logout" */
+
+/* Define this to make non-interactive shells begun with argv[0][0] == '-'
+   run the startup files when not in posix mode. */
+/* #define NON_INTERACTIVE_LOGIN_SHELLS */
+
+/* Define this if you want bash to try to check whether it's being run by
+   sshd and source the .bashrc if so (like the rshd behavior).  This checks
+   for the presence of SSH_CLIENT or SSH2_CLIENT in the initial environment,
+   which can be fooled under certain not-uncommon circumstances. */
+/* #define SSH_SOURCE_BASHRC */
+
+/* Define if you want the case-toggling operators (~[~]) and the
+   `capcase' variable attribute (declare -c). */
+/* TAG: bash-5.2 disable */
+#define CASEMOD_TOGGLECASE
+#define CASEMOD_CAPCASE
+
+/* This is used as the name of a shell function to call when a command
+   name is not found.  If you want to name it something other than the
+   default ("command_not_found_handle"), change it here. */
+/* #define NOTFOUND_HOOK "command_not_found_handle" */
+
+/* Define if you want each line saved to the history list in bashhist.c:
+   bash_add_history() to be sent to syslog(). */
+/* #define SYSLOG_HISTORY */
+#if defined (SYSLOG_HISTORY)
+#  define SYSLOG_FACILITY LOG_USER
+#  define SYSLOG_LEVEL LOG_INFO
+#  define OPENLOG_OPTS LOG_PID
+#endif
+
+/* Define if you want syslogging history to be controllable at runtime via a
+   shell option; if defined, the value is the default for the syslog_history
+   shopt option */
+#if defined (SYSLOG_HISTORY)
+/* #define SYSLOG_SHOPT 1 */
+#endif
+
+/* Define if you want to include code in shell.c to support wordexp(3) */
+/* #define WORDEXP_OPTION */
+
+/* Define as 1 if you want to enable code that implements multiple coprocs
+   executing simultaneously */
+#ifndef MULTIPLE_COPROCS
+#  define MULTIPLE_COPROCS 0
+#endif
+
+/* Define to 0 if you want the checkwinsize option off by default, 1 if you
+   want it on. */
+#define CHECKWINSIZE_DEFAULT	1
+
+/* Define to 1 if you want to optimize for sequential array assignment when
+   using indexed arrays, 0 if you want bash-4.2 behavior, which favors
+   random access but is O(N) for each array assignment. */
+#define OPTIMIZE_SEQUENTIAL_ARRAY_ASSIGNMENT	1
+
+/* Define to 1 if you want to be able to export indexed arrays to processes
+   using the foo=([0]=one [1]=two) and so on */
+/* #define ARRAY_EXPORT 1 */
+
+/* Define to 1 if you want the shell to exit if it is running setuid and its
+   attempt to drop privilege using setuid(getuid()) fails with errno == EAGAIN */
+/* #define EXIT_ON_SETUID_FAILURE 1 */
+
+/* Define to 1 if you want the shell to re-check $PATH if a hashed filename
+   no longer exists.  This behavior is the default in Posix mode. */
+#define CHECKHASH_DEFAULT 0
+
+/* Define to the maximum level of recursion you want for the eval builtin
+   and trap handlers (since traps are run as if run by eval).
+   0 means the limit is not active. */
+#define EVALNEST_MAX 0
+
+/* Define to the maximum level of recursion you want for the source/. builtin.
+   0 means the limit is not active. */
+#define SOURCENEST_MAX 0
+
+/* Define to use libc mktemp/mkstemp instead of replacements in lib/sh/tmpfile.c */
+#define USE_MKTEMP
+#define USE_MKSTEMP
+#define USE_MKDTEMP
+
+/* Define to force the value of OLDPWD inherited from the environment to be a
+   directory */
+#define OLDPWD_CHECK_DIRECTORY 1
+
+/* Define to set the initial size of the history list ($HISTSIZE). This must
+   be a string. */
+/*#define HISTSIZE_DEFAULT "500"*/
+
+/* Define to 0 if you want history expansion to be disabled by default in
+   interactive shells; define to 1 for the historical behavior of enabling
+   when the shell is interactive. */
+#define HISTEXPAND_DEFAULT	1
+
+/* Undefine or define to 0 if you don't want to allow associative array
+   assignment using a compound list of key-value pairs. */
+#define ASSOC_KVPAIR_ASSIGNMENT 1
diff --git a/config.h.in b/config.h.in
new file mode 100644
index 0000000..ab316d4
--- /dev/null
+++ b/config.h.in
@@ -0,0 +1,1235 @@
+/* config.h -- Configuration file for bash. */
+
+/* Copyright (C) 1987-2009,2011-2012,2013-2019 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _CONFIG_H_
+#define _CONFIG_H_
+
+/* Template settings for autoconf */
+
+#undef __EXTENSIONS__
+#undef _ALL_SOURCE
+#undef _GNU_SOURCE
+#undef _POSIX_SOURCE
+#undef _POSIX_1_SOURCE
+#undef _POSIX_PTHREAD_SEMANTICS
+#undef _TANDEM_SOURCE
+#undef _MINIX
+
+/* Configuration feature settings controllable by autoconf. */
+
+/* Define JOB_CONTROL if your operating system supports
+   BSD-like job control. */
+#undef JOB_CONTROL
+
+/* Define ALIAS if you want the alias features. */
+#undef ALIAS
+
+/* Define PUSHD_AND_POPD if you want those commands to be compiled in.
+   (Also the `dirs' commands.) */
+#undef PUSHD_AND_POPD
+
+/* Define BRACE_EXPANSION if you want curly brace expansion a la Csh:
+   foo{a,b} -> fooa foob.  Even if this is compiled in (the default) you
+   can turn it off at shell startup with `-nobraceexpansion', or during
+   shell execution with `set +o braceexpand'. */
+#undef BRACE_EXPANSION
+
+/* Define READLINE to get the nifty/glitzy editing features.
+   This is on by default.  You can turn it off interactively
+   with the -nolineediting flag. */
+#undef READLINE
+
+/* Define BANG_HISTORY if you want to have Csh style "!" history expansion.
+   This is unrelated to READLINE. */
+#undef BANG_HISTORY
+
+/* Define HISTORY if you want to have access to previously typed commands.
+
+   If both HISTORY and READLINE are defined, you can get at the commands
+   with line editing commands, and you can directly manipulate the history
+   from the command line.
+
+   If only HISTORY is defined, the `fc' and `history' builtins are
+   available. */
+#undef HISTORY
+
+/* Define this if you want completion that puts all alternatives into
+   a brace expansion shell expression. */
+#if defined (BRACE_EXPANSION) && defined (READLINE)
+#  define BRACE_COMPLETION
+#endif /* BRACE_EXPANSION */
+
+/* Define DEFAULT_ECHO_TO_XPG if you want the echo builtin to interpret
+   the backslash-escape characters by default, like the XPG Single Unix
+   Specification V2 for echo.
+   This requires that V9_ECHO be defined. */
+#undef DEFAULT_ECHO_TO_XPG
+
+/* Define HELP_BUILTIN if you want the `help' shell builtin and the long
+   documentation strings compiled into the shell. */
+#undef HELP_BUILTIN
+
+/* Define RESTRICTED_SHELL if you want the generated shell to have the
+   ability to be a restricted one.  The shell thus generated can become
+   restricted by being run with the name "rbash", or by setting the -r
+   flag. */
+#undef RESTRICTED_SHELL
+
+/* Define DISABLED_BUILTINS if you want "builtin foo" to always run the
+   shell builtin "foo", even if it has been disabled with "enable -n foo". */
+#undef DISABLED_BUILTINS
+
+/* Define PROCESS_SUBSTITUTION if you want the K*rn shell-like process
+   substitution features "<(file)". */
+/* Right now, you cannot do this on machines without fully operational
+   FIFO support.  This currently include NeXT and Alliant. */
+#undef PROCESS_SUBSTITUTION
+
+/* Define PROMPT_STRING_DECODE if you want the backslash-escaped special
+   characters in PS1 and PS2 expanded.  Variable expansion will still be
+   performed. */
+#undef PROMPT_STRING_DECODE
+
+/* Define SELECT_COMMAND if you want the Korn-shell style `select' command:
+	select word in word_list; do command_list; done */
+#undef SELECT_COMMAND
+
+/* Define COMMAND_TIMING of you want the ksh-style `time' reserved word and
+   the ability to time pipelines, functions, and builtins. */
+#undef COMMAND_TIMING
+
+/* Define ARRAY_VARS if you want ksh-style one-dimensional array variables. */
+#undef ARRAY_VARS
+
+/* Define DPAREN_ARITHMETIC if you want the ksh-style ((...)) arithmetic
+   evaluation command. */
+#undef DPAREN_ARITHMETIC
+
+/* Define EXTENDED_GLOB if you want the ksh-style [*+@?!](patlist) extended
+   pattern matching. */
+#undef EXTENDED_GLOB
+
+/* Define EXTGLOB_DEFAULT to the value you'd like the extglob shell option
+   to have by default */
+#undef EXTGLOB_DEFAULT
+
+/* Define COND_COMMAND if you want the ksh-style [[...]] conditional
+   command. */
+#undef COND_COMMAND
+
+/* Define COND_REGEXP if you want extended regular expression matching and the
+   =~ binary operator in the [[...]] conditional command. */
+#define COND_REGEXP
+
+/* Define COPROCESS_SUPPORT if you want support for ksh-like coprocesses and
+   the `coproc' reserved word */
+#define COPROCESS_SUPPORT
+
+/* Define ARITH_FOR_COMMAND if you want the ksh93-style
+	for (( init; test; step )) do list; done
+   arithmetic for command. */
+#undef ARITH_FOR_COMMAND
+
+/* Define NETWORK_REDIRECTIONS if you want /dev/(tcp|udp)/host/port to open
+   socket connections when used in redirections */
+#undef NETWORK_REDIRECTIONS
+
+/* Define PROGRAMMABLE_COMPLETION for the programmable completion features
+   and the complete builtin. */
+#undef PROGRAMMABLE_COMPLETION
+
+/* Define NO_MULTIBYTE_SUPPORT to not compile in support for multibyte
+   characters, even if the OS supports them. */
+#undef NO_MULTIBYTE_SUPPORT
+
+/* Define DEBUGGER if you want to compile in some features used only by the 
+   bash debugger. */
+#undef DEBUGGER
+
+/* Define STRICT_POSIX if you want bash to be strictly posix.2 conformant by
+   default (except for echo; that is controlled separately). */
+#undef STRICT_POSIX
+
+/* Define MEMSCRAMBLE if you want the bash malloc and free to scramble
+   memory contents on malloc() and free(). */
+#undef MEMSCRAMBLE
+
+/* Define for case-modifying variable attributes; variables modified on
+   assignment */
+#undef CASEMOD_ATTRS
+
+/* Define for case-modifying word expansions */
+#undef CASEMOD_EXPANSIONS
+
+/* Define to make the `direxpand' shopt option enabled by default. */
+#undef DIRCOMPLETE_EXPAND_DEFAULT
+
+/* Define to make the `globasciiranges' shopt option enabled by default. */
+#undef GLOBASCII_DEFAULT
+
+/* Define to allow functions to be imported from the environment. */
+#undef FUNCTION_IMPORT
+
+/* Define AFS if you are using Transarc's AFS. */
+#undef AFS
+
+#undef ENABLE_NLS
+
+/* End of configuration settings controllable by autoconf. */
+/* Other settable options appear in config-top.h. */
+
+#include "config-top.h"
+
+/* Beginning of autoconf additions. */
+
+/* Characteristics of the C compiler */
+#undef const
+
+#undef inline
+
+#undef restrict
+
+#undef volatile
+
+/* Define if cpp supports the ANSI-C stringizing `#' operator */
+#undef HAVE_STRINGIZE
+
+/* Define if the compiler supports `long double' variables. */
+#undef HAVE_LONG_DOUBLE
+
+#undef PROTOTYPES
+#undef __PROTOTYPES
+
+#undef __CHAR_UNSIGNED__
+
+/* Define if the compiler supports `long long' variables. */
+#undef HAVE_LONG_LONG
+
+#undef HAVE_UNSIGNED_LONG_LONG
+
+/* The number of bytes in a int.  */
+#undef SIZEOF_INT
+
+/* The number of bytes in a long.  */
+#undef SIZEOF_LONG
+
+/* The number of bytes in a pointer to char.  */
+#undef SIZEOF_CHAR_P
+
+/* The number of bytes in a double (hopefully 8). */
+#undef SIZEOF_DOUBLE
+
+/* The number of bytes in an `intmax_t'. */
+#undef SIZEOF_INTMAX_T
+
+/* The number of bytes in a `long long', if we have one. */
+#undef SIZEOF_LONG_LONG
+
+/* The number of bytes in a `wchar_t', if supported */
+#undef SIZEOF_WCHAR_T
+
+/* System paths */
+
+#define DEFAULT_MAIL_DIRECTORY "/usr/spool/mail"
+
+/* Characteristics of the system's header files and libraries that affect
+   the compilation environment. */
+
+/* Define if the system does not provide POSIX.1 features except
+   with this defined.  */
+#undef _POSIX_1_SOURCE
+
+/* Define if you need to in order for stat and other things to work.  */
+#undef _POSIX_SOURCE
+
+/* Define to use GNU libc extensions */
+#undef _GNU_SOURCE
+
+/* Define if you have the ANSI C header files.  */
+#undef STDC_HEADERS
+
+/* Memory management functions. */
+
+/* Define if using the bash version of malloc in lib/malloc/malloc.c */
+#undef USING_BASH_MALLOC
+
+#undef DISABLE_MALLOC_WRAPPERS
+
+/* Define if using alloca.c.  */
+#undef C_ALLOCA
+
+/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems.
+   This function is required for alloca.c support on those systems.  */
+#undef CRAY_STACKSEG_END
+
+/* Define if you have alloca, as a function or macro.  */
+#undef HAVE_ALLOCA
+
+/* Define if you have <alloca.h> and it should be used (not on Ultrix).  */
+#undef HAVE_ALLOCA_H
+
+/* Define if major/minor/makedev is defined in <sys/mkdev.h> */
+#undef MAJOR_IN_MAKEDEV
+
+/* Define if major/minor/makedev is defined in <sys/sysmacros.h> */
+#undef MAJOR_IN_SYSMACROS
+
+/* SYSTEM TYPES */
+
+/* Define to `long' if <sys/types.h> doesn't define.  */
+#undef off_t
+
+/* Define to `int' if <sys/types.h> doesn't define. */
+#undef mode_t
+
+/* Define to `int' if <signal.h> doesn't define. */
+#undef sigset_t
+
+/* Define to `int' if <sys/types.h> doesn't define.  */
+#undef pid_t
+
+/* Define to `short' if <sys/types.h> doesn't define.  */
+#undef bits16_t
+
+/* Define to `unsigned short' if <sys/types.h> doesn't define.  */
+#undef u_bits16_t
+
+/* Define to `int' if <sys/types.h> doesn't define.  */
+#undef bits32_t
+
+/* Define to `unsigned int' if <sys/types.h> doesn't define.  */
+#undef u_bits32_t
+
+/* Define to `double' if <sys/types.h> doesn't define. */
+#undef bits64_t
+
+/* Define to `unsigned int' if <sys/types.h> doesn't define. */
+#undef u_int
+
+/* Define to `unsigned long' if <sys/types.h> doesn't define.  */
+#undef u_long
+
+/* Define to `int' if <sys/types.h> doesn't define. */
+#undef ptrdiff_t
+
+/* Define to `unsigned' if <sys/types.h> doesn't define.  */
+#undef size_t
+
+/* Define to `int' if <sys/types.h> doesn't define. */
+#undef ssize_t
+
+/* Define to `long' if <stdint.h> doesn't define. */
+#undef intmax_t
+
+/* Define to `unsigned long' if <stdint.h> doesn't define. */
+#undef uintmax_t
+
+/* Define to integer type wide enough to hold a pointer if <stdint.h> doesn't define. */
+#undef uintptr_t
+ 
+/* Define to `int' if <sys/types.h> doesn't define.  */
+#undef uid_t
+
+/* Define to `long' if <sys/types.h> doesn't define.  */
+#undef clock_t
+
+/* Define to `long' if <sys/types.h> doesn't define.  */
+#undef time_t
+
+/* Define to `int' if <sys/types.h> doesn't define.  */
+#undef gid_t
+
+/* Define to `unsigned int' if <sys/socket.h> doesn't define. */
+#undef socklen_t
+
+/* Define to `int' if <signal.h> doesn't define. */
+#undef sig_atomic_t
+
+#undef HAVE_MBSTATE_T
+
+/* Define if you have quad_t in <sys/types.h>. */
+#undef HAVE_QUAD_T
+
+/* Define if you have wchar_t in <wctype.h>. */
+#undef HAVE_WCHAR_T
+
+/* Define if you have wctype_t in <wctype.h>. */
+#undef HAVE_WCTYPE_T
+
+/* Define if you have wint_t in <wctype.h>. */
+#undef HAVE_WINT_T
+
+#undef RLIMTYPE
+
+/* Define to the type of elements in the array set by `getgroups'.
+   Usually this is either `int' or `gid_t'.  */
+#undef GETGROUPS_T
+
+/* Characteristics of the machine archictecture. */
+
+/* If using the C implementation of alloca, define if you know the
+   direction of stack growth for your system; otherwise it will be
+   automatically deduced at run-time.
+	STACK_DIRECTION > 0 => grows toward higher addresses
+	STACK_DIRECTION < 0 => grows toward lower addresses
+	STACK_DIRECTION = 0 => direction of growth unknown
+ */
+#undef STACK_DIRECTION
+
+/* Define if the machine architecture is big-endian. */
+#undef WORDS_BIGENDIAN
+
+/* Check for the presence of certain non-function symbols in the system
+   libraries. */
+
+/* Define if `sys_siglist' is declared by <signal.h> or <unistd.h>.  */
+#undef HAVE_DECL_SYS_SIGLIST
+#undef SYS_SIGLIST_DECLARED
+
+/* Define if `_sys_siglist' is declared by <signal.h> or <unistd.h>.  */
+#undef UNDER_SYS_SIGLIST_DECLARED
+
+#undef HAVE_SYS_SIGLIST
+
+#undef HAVE_UNDER_SYS_SIGLIST
+
+#undef HAVE_SYS_ERRLIST
+
+#undef HAVE_TZNAME
+#undef HAVE_DECL_TZNAME
+
+/* Characteristics of some of the system structures. */
+
+#undef HAVE_STRUCT_DIRENT_D_INO
+
+#undef HAVE_STRUCT_DIRENT_D_FILENO
+
+#undef HAVE_STRUCT_DIRENT_D_NAMLEN
+
+#undef TIOCSTAT_IN_SYS_IOCTL
+
+#undef FIONREAD_IN_SYS_IOCTL
+
+#undef GWINSZ_IN_SYS_IOCTL
+
+#undef STRUCT_WINSIZE_IN_SYS_IOCTL
+
+#undef TM_IN_SYS_TIME
+
+#undef STRUCT_WINSIZE_IN_TERMIOS
+
+#undef SPEED_T_IN_SYS_TYPES
+
+#undef TERMIOS_LDISC
+
+#undef TERMIO_LDISC
+
+#undef HAVE_STRUCT_STAT_ST_BLOCKS
+
+#undef HAVE_STRUCT_TM_TM_ZONE
+#undef HAVE_TM_ZONE
+
+#undef HAVE_TIMEVAL
+
+#undef HAVE_STRUCT_TIMEZONE
+
+#undef WEXITSTATUS_OFFSET
+
+#undef HAVE_STRUCT_TIMESPEC
+#undef TIME_H_DEFINES_STRUCT_TIMESPEC
+#undef SYS_TIME_H_DEFINES_STRUCT_TIMESPEC
+#undef PTHREAD_H_DEFINES_STRUCT_TIMESPEC
+
+#undef HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC
+#undef TYPEOF_STRUCT_STAT_ST_ATIM_IS_STRUCT_TIMESPEC
+#undef HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC
+#undef HAVE_STRUCT_STAT_ST_ATIMENSEC
+#undef HAVE_STRUCT_STAT_ST_ATIM_ST__TIM_TV_NSEC
+
+/* Characteristics of definitions in the system header files. */
+
+#undef HAVE_GETPW_DECLS
+
+#undef HAVE_RESOURCE
+
+#undef HAVE_LIBC_FNM_EXTMATCH
+
+/* Define if you have <linux/audit.h> and it defines AUDIT_USER_TTY */
+#undef HAVE_DECL_AUDIT_USER_TTY
+
+#undef HAVE_DECL_CONFSTR
+
+#undef HAVE_DECL_PRINTF
+
+#undef HAVE_DECL_SBRK
+
+#undef HAVE_DECL_STRCPY
+
+#undef HAVE_DECL_STRSIGNAL
+
+#undef HAVE_DECL_STRTOLD
+
+#undef PRI_MACROS_BROKEN
+
+#undef STRTOLD_BROKEN
+
+/* Define if WCONTINUED is defined in system headers, but rejected by waitpid */
+#undef WCONTINUED_BROKEN
+
+/* These are checked with BASH_CHECK_DECL */
+
+#undef HAVE_DECL_STRTOIMAX
+#undef HAVE_DECL_STRTOL
+#undef HAVE_DECL_STRTOLL
+#undef HAVE_DECL_STRTOUL
+#undef HAVE_DECL_STRTOULL
+#undef HAVE_DECL_STRTOUMAX
+
+/* Characteristics of system calls and C library functions. */
+
+/* Define if the `getpgrp' function takes no argument.  */
+#undef GETPGRP_VOID
+
+#undef NAMED_PIPES_MISSING
+
+#undef OPENDIR_NOT_ROBUST
+
+#undef PGRP_PIPE
+
+/* Define if the setvbuf function takes the buffering type as its second
+   argument and the buffer pointer as the third, as on System V
+   before release 3.  */
+#undef SETVBUF_REVERSED
+
+#undef STAT_MACROS_BROKEN
+
+#undef ULIMIT_MAXFDS
+
+#undef CAN_REDEFINE_GETENV
+
+#undef HAVE_STD_PUTENV
+
+#undef HAVE_STD_UNSETENV
+
+#undef HAVE_PRINTF_A_FORMAT
+
+#undef CTYPE_NON_ASCII
+
+/* Define if you have <langinfo.h> and nl_langinfo(CODESET). */
+#undef HAVE_LANGINFO_CODESET
+
+/* Characteristics of properties exported by the kernel. */
+
+/* Define if the kernel can exec files beginning with #! */
+#undef HAVE_HASH_BANG_EXEC
+
+/* Define if you have the /dev/fd devices to map open files into the file system. */
+#undef HAVE_DEV_FD
+
+/* Defined to /dev/fd or /proc/self/fd (linux). */
+#undef DEV_FD_PREFIX
+
+/* Define if you have the /dev/stdin device. */
+#undef HAVE_DEV_STDIN
+
+/* The type of iconv's `inbuf' argument */
+#undef ICONV_CONST
+
+/* Type and behavior of signal handling functions. */
+
+/* Define as the return type of signal handlers (int or void).  */
+#undef RETSIGTYPE
+
+/* Define if return type of signal handlers is void */
+#undef VOID_SIGHANDLER
+
+#undef MUST_REINSTALL_SIGHANDLERS
+
+#undef HAVE_BSD_SIGNALS
+
+#undef HAVE_POSIX_SIGNALS
+
+#undef HAVE_USG_SIGHOLD
+
+#undef UNUSABLE_RT_SIGNALS
+
+/* Presence of system and C library functions. */
+
+/* Define if you have the arc4random function.  */
+#undef HAVE_ARC4RANDOM
+
+/* Define if you have the asprintf function.  */
+#undef HAVE_ASPRINTF
+
+/* Define if you have the bcopy function.  */
+#undef HAVE_BCOPY
+
+/* Define if you have the bzero function.  */
+#undef HAVE_BZERO
+
+/* Define if you have the chown function.  */
+#undef HAVE_CHOWN
+
+/* Define if you have the confstr function.  */
+#undef HAVE_CONFSTR
+
+/* Define if you have the dlclose function.  */
+#undef HAVE_DLCLOSE
+
+/* Define if you have the dlopen function.  */
+#undef HAVE_DLOPEN
+
+/* Define if you have the dlsym function.  */
+#undef HAVE_DLSYM
+
+/* Define if you don't have vprintf but do have _doprnt.  */
+#undef HAVE_DOPRNT
+
+/* Define if you have the dprintf function.  */
+#undef HAVE_DPRINTF
+
+/* Define if you have the dup2 function.  */
+#undef HAVE_DUP2
+
+/* Define if you have the eaccess function.  */
+#undef HAVE_EACCESS
+
+/* Define if you have the faccessat function.  */
+#undef HAVE_FACCESSAT
+
+/* Define if you have the fcntl function.  */
+#undef HAVE_FCNTL
+
+/* Define if you have the fnmatch function.  */
+#undef HAVE_FNMATCH
+
+/* Can fnmatch be used as a fallback to match [=equiv=] with collation weights? */
+#undef FNMATCH_EQUIV_FALLBACK
+
+/* Define if you have the fpurge/__fpurge function.  */
+#undef HAVE_FPURGE
+#undef HAVE___FPURGE
+#undef HAVE_DECL_FPURGE
+
+/* Define if you have the getaddrinfo function. */
+#undef HAVE_GETADDRINFO
+
+/* Define if you have the getcwd function.  */
+#undef HAVE_GETCWD
+
+/* Define if you have the getentropy function.  */
+#undef HAVE_GETENTROPY
+
+/* Define if you have the getdtablesize function.  */
+#undef HAVE_GETDTABLESIZE
+
+/* Define if you have the getgroups function.  */
+#undef HAVE_GETGROUPS
+
+/* Define if you have the gethostbyname function.  */
+#undef HAVE_GETHOSTBYNAME
+
+/* Define if you have the gethostname function.  */
+#undef HAVE_GETHOSTNAME
+
+/* Define if you have the getpagesize function.  */
+#undef HAVE_GETPAGESIZE
+
+/* Define if you have the getpeername function.  */
+#undef HAVE_GETPEERNAME
+
+/* Define if you have the getpwent function. */
+#undef HAVE_GETPWENT
+
+/* Define if you have the getpwnam function. */
+#undef HAVE_GETPWNAM
+
+/* Define if you have the getpwuid function. */
+#undef HAVE_GETPWUID
+
+/* Define if you have the getrandom function.  */
+#undef HAVE_GETRANDOM
+
+/* Define if you have the getrlimit function.  */
+#undef HAVE_GETRLIMIT
+
+/* Define if you have the getrusage function.  */
+#undef HAVE_GETRUSAGE
+
+/* Define if you have the getservbyname function.  */
+#undef HAVE_GETSERVBYNAME
+
+/* Define if you have the getservent function.  */
+#undef HAVE_GETSERVENT
+
+/* Define if you have the gettimeofday function.  */
+#undef HAVE_GETTIMEOFDAY
+
+/* Define if you have the getwd function.  */
+#undef HAVE_GETWD
+
+/* Define if you have the iconv function.  */
+#undef HAVE_ICONV
+
+/* Define if you have the imaxdiv function.  */
+#undef HAVE_IMAXDIV
+
+/* Define if you have the inet_aton function.  */
+#undef HAVE_INET_ATON
+
+/* Define if you have the isascii function. */
+#undef HAVE_ISASCII
+
+/* Define if you have the isblank function.  */
+#undef HAVE_ISBLANK
+
+/* Define if you have the isgraph function.  */
+#undef HAVE_ISGRAPH
+
+/* Define if you have the isprint function.  */
+#undef HAVE_ISPRINT
+
+/* Define if you have the isspace function.  */
+#undef HAVE_ISSPACE
+
+/* Define if you have the iswctype function.  */
+#undef HAVE_ISWCTYPE
+
+/* Define if you have the iswlower function.  */
+#undef HAVE_ISWLOWER
+
+/* Define if you have the iswupper function.  */
+#undef HAVE_ISWUPPER
+
+/* Define if you have the isxdigit function.  */
+#undef HAVE_ISXDIGIT
+
+/* Define if you have the kill function.  */
+#undef HAVE_KILL
+
+/* Define if you have the killpg function.  */
+#undef HAVE_KILLPG
+
+/* Define if you have the lstat function. */
+#undef HAVE_LSTAT
+
+/* Define if you have the locale_charset function. */
+#undef HAVE_LOCALE_CHARSET
+
+/* Define if you have the mbrlen function. */
+#undef HAVE_MBRLEN
+
+/* Define if you have the mbrtowc function. */
+#undef HAVE_MBRTOWC
+
+/* Define if you have the mbscasecmp function. */
+#undef HAVE_MBSCASECMP
+
+/* Define if you have the mbschr function. */
+#undef HAVE_MBSCHR
+
+/* Define if you have the mbscmp function. */
+#undef HAVE_MBSCMP
+
+/* Define if you have the mbsnrtowcs function. */
+#undef HAVE_MBSNRTOWCS
+
+/* Define if you have the mbsrtowcs function. */
+#undef HAVE_MBSRTOWCS
+
+/* Define if you have the memmove function.  */
+#undef HAVE_MEMMOVE
+
+/* Define if you have the memset function.  */
+#undef HAVE_MEMSET
+
+/* Define if you have the mkdtemp function.  */
+#undef HAVE_MKDTEMP
+
+/* Define if you have the mkfifo function.  */
+#undef HAVE_MKFIFO
+
+/* Define if you have the mkstemp function.  */
+#undef HAVE_MKSTEMP
+
+/* Define if you have the pathconf function. */
+#undef HAVE_PATHCONF
+
+/* Define if you have the pselect function.  */
+#undef HAVE_PSELECT
+
+/* Define if you have the putenv function.  */
+#undef HAVE_PUTENV
+
+/* Define if you have the raise function. */
+#undef HAVE_RAISE
+
+/* Define if you have the random function. */
+#undef HAVE_RANDOM
+
+/* Define if you have the readlink function. */
+#undef HAVE_READLINK
+
+/* Define if you have the regcomp function. */
+#undef HAVE_REGCOMP
+
+/* Define if you have the regexec function. */
+#undef HAVE_REGEXEC
+
+/* Define if you have the rename function. */
+#undef HAVE_RENAME
+
+/* Define if you have the sbrk function. */
+#undef HAVE_SBRK
+
+/* Define if you have the select function.  */
+#undef HAVE_SELECT
+
+/* Define if you have the setdtablesize function.  */
+#undef HAVE_SETDTABLESIZE
+
+/* Define if you have the setenv function.  */
+#undef HAVE_SETENV
+
+/* Define if you have the setitimer function.  */
+#undef HAVE_SETITIMER
+
+/* Define if you have the setlinebuf function.  */
+#undef HAVE_SETLINEBUF
+
+/* Define if you have the setlocale function.  */
+#undef HAVE_SETLOCALE
+
+/* Define if you have the setostype function.  */
+#undef HAVE_SETOSTYPE
+
+/* Define if you have the setregid function.  */
+#undef HAVE_SETREGID
+#undef HAVE_DECL_SETREGID
+
+/* Define if you have the setregid function.  */
+#undef HAVE_SETRESGID
+#undef HAVE_DECL_SETRESGID
+
+/* Define if you have the setresuid function.  */
+#undef HAVE_SETRESUID
+#undef HAVE_DECL_SETRESUID
+
+/* Define if you have the setvbuf function.  */
+#undef HAVE_SETVBUF
+
+/* Define if you have the siginterrupt function.  */
+#undef HAVE_SIGINTERRUPT
+
+/* Define if you have the POSIX.1-style sigsetjmp function.  */
+#undef HAVE_POSIX_SIGSETJMP
+
+/* Define if you have the snprintf function.  */
+#undef HAVE_SNPRINTF
+
+/* Define if you have the strcasecmp function.  */
+#undef HAVE_STRCASECMP
+
+/* Define if you have the strcasestr function.  */
+#undef HAVE_STRCASESTR
+
+/* Define if you have the strchr function.  */
+#undef HAVE_STRCHR
+
+/* Define if you have the strchrnul function.  */
+#undef HAVE_STRCHRNUL
+
+/* Define if you have the strcoll function.  */
+#undef HAVE_STRCOLL
+
+/* Define if you have the strerror function.  */
+#undef HAVE_STRERROR
+
+/* Define if you have the strftime function. */
+#undef HAVE_STRFTIME
+
+/* Define if you have the strnlen function. */
+#undef HAVE_STRNLEN
+
+/* Define if you have the strpbrk function. */
+#undef HAVE_STRPBRK
+
+/* Define if you have the strstr function. */
+#undef HAVE_STRSTR
+
+/* Define if you have the strtod function. */
+#undef HAVE_STRTOD
+
+/* Define if you have the strtoimax function. */
+#undef HAVE_STRTOIMAX
+
+/* Define if you have the strtol function. */
+#undef HAVE_STRTOL
+
+/* Define if you have the strtoll function. */
+#undef HAVE_STRTOLL
+
+/* Define if you have the strtoul function. */
+#undef HAVE_STRTOUL
+
+/* Define if you have the strtoull function. */
+#undef HAVE_STRTOULL
+
+/* Define if you have the strtoumax function. */
+#undef HAVE_STRTOUMAX
+
+/* Define if you have the strsignal function or macro. */
+#undef HAVE_STRSIGNAL
+
+/* Define if you have the sysconf function. */
+#undef HAVE_SYSCONF
+
+/* Define if you have the syslog function. */
+#undef HAVE_SYSLOG
+
+/* Define if you have the tcgetattr function.  */
+#undef HAVE_TCGETATTR
+
+/* Define if you have the tcgetpgrp function.  */
+#undef HAVE_TCGETPGRP
+
+/* Define if you have the times function.  */
+#undef HAVE_TIMES
+
+/* Define if you have the towlower function.  */
+#undef HAVE_TOWLOWER
+
+/* Define if you have the towupper function.  */
+#undef HAVE_TOWUPPER
+
+/* Define if you have the ttyname function.  */
+#undef HAVE_TTYNAME
+
+/* Define if you have the tzset function. */
+#undef HAVE_TZSET
+
+/* Define if you have the ulimit function. */
+#undef HAVE_ULIMIT
+
+/* Define if you have the uname function. */
+#undef HAVE_UNAME
+
+/* Define if you have the unsetenv function.  */
+#undef HAVE_UNSETENV
+
+/* Define if you have the vasprintf function.  */
+#undef HAVE_VASPRINTF
+
+/* Define if you have the vprintf function.  */
+#undef HAVE_VPRINTF
+
+/* Define if you have the vsnprintf function.  */
+#undef HAVE_VSNPRINTF
+
+/* Define if you have the waitpid function. */
+#undef HAVE_WAITPID
+
+/* Define if you have the wait3 function.  */
+#undef HAVE_WAIT3
+
+/* Define if you have the wcrtomb function.  */
+#undef HAVE_WCRTOMB
+
+/* Define if you have the wcscoll function.  */
+#undef HAVE_WCSCOLL
+
+/* Define if you have the wcsdup function.  */
+#undef HAVE_WCSDUP
+
+/* Define if you have the wctype function.  */
+#undef HAVE_WCTYPE
+
+/* Define if you have the wcswidth function.  */
+#undef HAVE_WCSWIDTH
+
+/* Define if you have the wcwidth function.  */
+#undef HAVE_WCWIDTH
+
+/* and if it works */
+#undef WCWIDTH_BROKEN
+
+/* Presence of certain system include files. */
+
+/* Define if you have the <arpa/inet.h> header file. */
+#undef HAVE_ARPA_INET_H
+
+/* Define if you have the <dirent.h> header file.  */
+#undef HAVE_DIRENT_H
+
+/* Define if you have the <dlfcn.h> header file.  */
+#undef HAVE_DLFCN_H
+
+/* Define if you have the <grp.h> header file.  */
+#undef HAVE_GRP_H
+
+/* Define if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define if you have the <langinfo.h> header file.  */
+#undef HAVE_LANGINFO_H
+
+/* Define if you have the <libaudit.h> header file. */
+#undef HAVE_LIBAUDIT_H
+
+/* Define if you have the <libintl.h> header file. */
+#undef HAVE_LIBINTL_H
+
+/* Define if you have the <limits.h> header file.  */
+#undef HAVE_LIMITS_H
+
+/* Define if you have the <locale.h> header file.  */
+#undef HAVE_LOCALE_H
+
+/* Define if you have the <mbstr.h> header file.  */
+#undef HAVE_MBSTR_H
+
+/* Define if you have the <ndir.h> header file.  */
+#undef HAVE_NDIR_H
+
+/* Define if you have the <netdh.h> header file. */
+#undef HAVE_NETDB_H
+
+/* Define if you have the <netinet/in.h> header file. */
+#undef HAVE_NETINET_IN_H
+
+/* Define if you have the <pwd.h> header file. */
+#undef HAVE_PWD_H
+
+/* Define if you have the <regex.h> header file. */
+#undef HAVE_REGEX_H
+
+/* Define if you have the <stdlib.h> header file.  */
+#undef HAVE_STDLIB_H
+
+/* Define if you have the <stdarg.h> header file.  */
+#undef HAVE_STDARG_H
+
+/* Define if you have the <string.h> header file.  */
+#undef HAVE_STRING_H
+
+/* Define if you have the <strings.h> header file.  */
+#undef HAVE_STRINGS_H
+
+/* Define if you have the <memory.h> header file.  */
+#undef HAVE_MEMORY_H
+
+/* Define if you have the <stdbool.h> header file. */
+#undef HAVE_STDBOOL_H
+
+/* Define if you have the <stddef.h> header file. */
+#undef HAVE_STDDEF_H
+
+/* Define if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define if you have the <syslog.h> header file. */
+#undef HAVE_SYSLOG_H
+
+/* Define if you have the <sys/dir.h> header file.  */
+#undef HAVE_SYS_DIR_H
+
+/* Define if you have the <sys/file.h> header file.  */
+#undef HAVE_SYS_FILE_H
+
+/* Define if you have the <sys/ioctl.h> header file.  */
+#undef HAVE_SYS_IOCTL_H
+
+/* Define if you have the <sys/mman.h> header file.  */
+#undef HAVE_SYS_MMAN_H
+
+/* Define if you have the <sys/ndir.h> header file.  */
+#undef HAVE_SYS_NDIR_H
+
+/* Define if you have the <sys/param.h> header file.  */
+#undef HAVE_SYS_PARAM_H
+
+/* Define if you have the <sys/pte.h> header file.  */
+#undef HAVE_SYS_PTE_H
+
+/* Define if you have the <sys/ptem.h> header file.  */
+#undef HAVE_SYS_PTEM_H
+
+/* Define if you have the <sys/random.h> header file.  */
+#undef HAVE_SYS_RANDOM_H
+
+/* Define if you have the <sys/resource.h> header file.  */
+#undef HAVE_SYS_RESOURCE_H
+
+/* Define if you have the <sys/select.h> header file.  */
+#undef HAVE_SYS_SELECT_H
+
+/* Define if you have the <sys/socket.h> header file.  */
+#undef HAVE_SYS_SOCKET_H
+
+/* Define if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define if you have the <sys/stream.h> header file.  */
+#undef HAVE_SYS_STREAM_H
+
+/* Define if you have <sys/time.h> */
+#undef HAVE_SYS_TIME_H
+
+#undef TIME_WITH_SYS_TIME
+
+/* Define if you have <sys/times.h> */
+#undef HAVE_SYS_TIMES_H
+
+/* Define if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define if you have <sys/wait.h> that is POSIX.1 compatible.  */
+#undef HAVE_SYS_WAIT_H
+
+/* Define if you have the <termcap.h> header file.  */
+#undef HAVE_TERMCAP_H
+
+/* Define if you have the <termio.h> header file.  */
+#undef HAVE_TERMIO_H
+
+/* Define if you have the <termios.h> header file.  */
+#undef HAVE_TERMIOS_H
+
+/* Define if you have the <ulimit.h> header file.  */
+#undef HAVE_ULIMIT_H
+
+/* Define if you have the <unistd.h> header file.  */
+#undef HAVE_UNISTD_H
+
+/* Define if you have the <varargs.h> header file.  */
+#undef HAVE_VARARGS_H
+
+/* Define if you have the <wchar.h> header file.  */
+#undef HAVE_WCHAR_H
+
+/* Define if you have the <varargs.h> header file.  */
+#undef HAVE_WCTYPE_H
+
+/* Presence of certain system libraries. */
+
+#undef HAVE_LIBDL
+
+#undef HAVE_LIBSUN
+
+#undef HAVE_LIBSOCKET
+
+/* Are we running the GNU C library, version 2.1 or later? */
+#undef GLIBC21
+
+/* Are we running SVR5 (UnixWare 7)? */
+#undef SVR5
+
+/* Are we running SVR4.2? */
+#undef SVR4_2
+
+/* Are we running some version of SVR4? */
+#undef SVR4
+
+/* Define if job control is unusable or unsupported. */
+#undef JOB_CONTROL_MISSING
+
+/* Do we need to define _KERNEL to get the RLIMIT_* defines from
+   <sys/resource.h>? */
+#undef RLIMIT_NEEDS_KERNEL
+
+/* Number of bits in a file offset, on hosts where this is settable. */
+#undef _FILE_OFFSET_BITS
+
+/* Define for large files on AIX-style hosts. */
+#undef _LARGE_FILES
+
+/* Do strcoll(3) and strcmp(3) give different results in the default locale? */
+#undef STRCOLL_BROKEN
+
+#undef DUP2_BROKEN
+
+#undef GETCWD_BROKEN
+
+#undef DEV_FD_STAT_BROKEN
+
+/* Additional defines for configuring lib/intl, maintained by autoscan/autoheader */
+
+/* Define if you have the <argz.h> header file. */
+#undef HAVE_ARGZ_H
+
+/* Define if you have the <errno.h> header file. */
+#undef HAVE_ERRNO_H
+
+/* Define if you have the <fcntl.h> header file. */
+#undef HAVE_FCNTL_H
+
+/* Define if you have the <malloc.h> header file. */
+#undef HAVE_MALLOC_H
+
+/* Define if you have the <stdio_ext.h> header file. */
+#undef HAVE_STDIO_EXT_H
+
+/* Define if you have the `dcgettext' function. */
+#undef HAVE_DCGETTEXT
+
+/* Define if you have the `localeconv' function. */
+#undef HAVE_LOCALECONV
+
+/* Define if your system has a working `malloc' function. */
+/* #undef HAVE_MALLOC */
+
+/* Define if you have the `mempcpy' function. */
+#undef HAVE_MEMPCPY
+
+/* Define if you have a working `mmap' system call. */
+#undef HAVE_MMAP
+
+/* Define if you have the `mremap' function. */
+#undef HAVE_MREMAP
+
+/* Define if you have the `munmap' function. */
+#undef HAVE_MUNMAP
+
+/* Define if you have the `nl_langinfo' function. */
+#undef HAVE_NL_LANGINFO
+
+/* Define if you have the `stpcpy' function. */
+#undef HAVE_STPCPY
+
+/* Define if you have the `strcspn' function. */
+#undef HAVE_STRCSPN
+
+/* Define if you have the `strdup' function. */
+#undef HAVE_STRDUP
+
+/* Define if you have the `__argz_count' function. */
+#undef HAVE___ARGZ_COUNT
+
+/* Define if you have the `__argz_next' function. */
+#undef HAVE___ARGZ_NEXT
+
+/* Define if you have the `__argz_stringify' function. */
+#undef HAVE___ARGZ_STRINGIFY
+
+/* End additions for lib/intl */
+
+#include "config-bot.h"
+
+#endif /* _CONFIG_H_ */
diff --git a/configure b/configure
new file mode 100755
index 0000000..0f1d3ed
--- /dev/null
+++ b/configure
@@ -0,0 +1,21992 @@
+#! /bin/sh
+# From configure.ac for Bash 5.1, version 5.022.
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.69 for bash 5.1-release.
+#
+# Report bugs to <bug-bash@gnu.org>.
+#
+#
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Use a proper internal environment variable to ensure we don't fall
+  # into an infinite loop, continuously re-executing ourselves.
+  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+    _as_can_reexec=no; export _as_can_reexec;
+    # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+  fi
+  # We don't want this to propagate to other subprocesses.
+          { _as_can_reexec=; unset _as_can_reexec;}
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  export CONFIG_SHELL
+             # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf@gnu.org and bug-bash@gnu.org
+$0: about your system, including any error possibly output
+$0: before this message. Then install a modern shell, or
+$0: manually run the script under such a shell if you do
+$0: have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+  # already done that, so ensure we don't try to do so again and fall
+  # in an infinite loop.  This has already happened in practice.
+  _as_can_reexec=no; export _as_can_reexec
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -pR'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -pR'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -pR'
+  fi
+else
+  as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='bash'
+PACKAGE_TARNAME='bash'
+PACKAGE_VERSION='5.1-release'
+PACKAGE_STRING='bash 5.1-release'
+PACKAGE_BUGREPORT='bug-bash@gnu.org'
+PACKAGE_URL=''
+
+ac_unique_file="shell.h"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+gt_needs=
+ac_header_list=
+gl_use_threads_default=
+ac_func_list=
+ac_subst_vars='LTLIBOBJS
+LOCAL_DEFS
+LOCAL_LDFLAGS
+LOCAL_CFLAGS
+LOCAL_LIBS
+MALLOC_DEBUG
+DEBUG
+RELSTATUS
+BASHVERS
+headersdir
+loadablesdir
+BUILD_DIR
+incdir
+PROFILE_FLAGS
+SHOBJ_STATUS
+SHOBJ_LIBS
+SHOBJ_XLDFLAGS
+SHOBJ_LDFLAGS
+SHOBJ_LD
+SHOBJ_CFLAGS
+SHOBJ_CC
+JOBS_O
+TERMCAP_DEP
+TERMCAP_LIB
+SIGLIST_O
+PTHREAD_H_DEFINES_STRUCT_TIMESPEC
+SYS_TIME_H_DEFINES_STRUCT_TIMESPEC
+TIME_H_DEFINES_STRUCT_TIMESPEC
+LIBINTL_H
+INTL_INC
+INTL_DEP
+LIBOBJS
+POSUB
+LTLIBINTL
+LIBINTL
+INTLLIBS
+INTL_LIBTOOL_SUFFIX_PREFIX
+INTLOBJS
+GENCAT
+INSTOBJEXT
+DATADIRNAME
+CATOBJEXT
+USE_INCLUDED_LIBINTL
+BUILD_INCLUDED_LIBINTL
+WINDRES
+WOE32
+WOE32DLL
+HAVE_NAMELESS_LOCALES
+HAVE_WPRINTF
+HAVE_NEWLOCALE
+HAVE_SNPRINTF
+HAVE_ASPRINTF
+HAVE_POSIX_PRINTF
+INTL_DEFAULT_VERBOSITY
+ARFLAGS
+INTL_MACOSX_LIBS
+GLIBC21
+GNULIB_OVERRIDES_WINT_T
+INTLBISON
+LTLIBICONV
+LIBICONV
+LTLIBMULTITHREAD
+LIBMULTITHREAD
+LTLIBTHREAD
+LIBTHREAD
+LIBPTH_PREFIX
+LTLIBPTH
+LIBPTH
+PRI_MACROS_BROKEN
+ALLOCA
+HAVE_VISIBILITY
+CFLAG_VISIBILITY
+GLIBC2
+XGETTEXT_EXTRA_OPTIONS
+MSGMERGE
+XGETTEXT_015
+XGETTEXT
+GMSGFMT_015
+MSGFMT_015
+GMSGFMT
+MSGFMT
+GETTEXT_MACRO_VERSION
+USE_NLS
+SED
+MKDIR_P
+SIZE
+MAKE_SHELL
+SET_MAKE
+YFLAGS
+YACC
+RANLIB
+AR
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+TILDE_LIB
+HIST_LIBDIR
+HISTORY_DEP
+HISTORY_LIB
+RL_INCLUDE
+RL_INCLUDEDIR
+RL_LIBDIR
+READLINE_DEP
+READLINE_LIB
+RL_MINOR
+RL_MAJOR
+RL_VERSION
+LIBS_FOR_BUILD
+STATIC_LD
+SIGNAMES_O
+SIGNAMES_H
+CROSS_COMPILE
+EGREP
+GREP
+CPP
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+HELPSTRINGS
+HELPFILES_TARGET
+HELPINSTALL
+HELPDIRDEFINE
+HELPDIR
+MALLOC_DEP
+MALLOC_LDFLAGS
+MALLOC_LIBRARY
+MALLOC_LIB
+MALLOC_SRC
+MALLOC_TARGET
+TESTSCRIPT
+CPPFLAGS_FOR_BUILD
+LDFLAGS_FOR_BUILD
+CFLAGS_FOR_BUILD
+CC_FOR_BUILD
+DEBUGGER_START_FILE
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+with_afs
+with_bash_malloc
+with_curses
+with_gnu_malloc
+with_installed_readline
+enable_minimal_config
+enable_alias
+enable_arith_for_command
+enable_array_variables
+enable_bang_history
+enable_brace_expansion
+enable_casemod_attributes
+enable_casemod_expansions
+enable_command_timing
+enable_cond_command
+enable_cond_regexp
+enable_coprocesses
+enable_debugger
+enable_dev_fd_stat_broken
+enable_direxpand_default
+enable_directory_stack
+enable_disabled_builtins
+enable_dparen_arithmetic
+enable_extended_glob
+enable_extended_glob_default
+enable_function_import
+enable_glob_asciiranges_default
+enable_help_builtin
+enable_history
+enable_job_control
+enable_multibyte
+enable_net_redirections
+enable_process_substitution
+enable_progcomp
+enable_prompt_string_decoding
+enable_readline
+enable_restricted
+enable_select
+enable_separate_helpfiles
+enable_single_help_strings
+enable_strict_posix_default
+enable_usg_echo_default
+enable_xpg_echo_default
+enable_mem_scramble
+enable_profiling
+enable_static_link
+enable_largefile
+enable_nls
+enable_threads
+with_gnu_ld
+enable_rpath
+with_libpth_prefix
+with_libiconv_prefix
+with_included_gettext
+with_libintl_prefix
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+DEBUGGER_START_FILE
+CC_FOR_BUILD
+CFLAGS_FOR_BUILD
+LDFLAGS_FOR_BUILD
+CPPFLAGS_FOR_BUILD
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP
+YACC
+YFLAGS'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures bash 5.1-release to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking ...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/bash]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of bash 5.1-release:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --enable-minimal-config a minimal sh-like configuration
+  --enable-alias          enable shell aliases
+  --enable-arith-for-command
+                          enable arithmetic for command
+  --enable-array-variables
+                          include shell array variables
+  --enable-bang-history   turn on csh-style history substitution
+  --enable-brace-expansion
+                          include brace expansion
+  --enable-casemod-attributes
+                          include case-modifying variable attributes
+  --enable-casemod-expansions
+                          include case-modifying word expansions
+  --enable-command-timing enable the time reserved word and command timing
+  --enable-cond-command   enable the conditional command
+  --enable-cond-regexp    enable extended regular expression matching in
+                          conditional commands
+  --enable-coprocesses    enable coprocess support and the coproc reserved
+                          word
+  --enable-debugger       enable support for bash debugger
+  --enable-dev-fd-stat-broken
+                          enable this option if stat on /dev/fd/N and fstat on
+                          file descriptor N don't return the same results
+  --enable-direxpand-default
+                          enable the direxpand shell option by default
+  --enable-directory-stack
+                          enable builtins pushd/popd/dirs
+  --enable-disabled-builtins
+                          allow disabled builtins to still be invoked
+  --enable-dparen-arithmetic
+                          include ((...)) command
+  --enable-extended-glob  include ksh-style extended pattern matching
+  --enable-extended-glob-default
+                          force extended pattern matching to be enabled by
+                          default
+  --enable-function-import
+                          allow bash to import exported function definitions
+                          by default
+  --enable-glob-asciiranges-default
+                          force bracket range expressions in pattern matching
+                          to use the C locale by default
+  --enable-help-builtin   include the help builtin
+  --enable-history        turn on command history
+  --enable-job-control    enable job control features
+  --enable-multibyte      enable multibyte characters if OS supports them
+  --enable-net-redirections
+                          enable /dev/tcp/host/port redirection
+  --enable-process-substitution
+                          enable process substitution
+  --enable-progcomp       enable programmable completion and the complete
+                          builtin
+  --enable-prompt-string-decoding
+                          turn on escape character decoding in prompts
+  --enable-readline       turn on command line editing
+  --enable-restricted     enable a restricted shell
+  --enable-select         include select command
+  --enable-separate-helpfiles
+                          use external files for help builtin documentation
+  --enable-single-help-strings
+                          store help documentation as a single string to ease
+                          translation
+  --enable-strict-posix-default
+                          configure bash to be posix-conformant by default
+  --enable-usg-echo-default
+                          a synonym for --enable-xpg-echo-default
+  --enable-xpg-echo-default
+                          make the echo builtin expand escape sequences by
+                          default
+  --enable-mem-scramble   scramble memory on calls to malloc and free
+  --enable-profiling      allow profiling with gprof
+  --enable-static-link    link bash statically, for use as a root shell
+  --disable-largefile     omit support for large files
+  --disable-nls           do not use Native Language Support
+  --enable-threads={posix|solaris|pth|windows}
+                          specify multithreading API
+  --disable-threads       build without multithread safety
+  --disable-rpath         do not hardcode runtime library paths
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --with-afs              if you are running AFS
+  --with-bash-malloc      use the Bash version of malloc
+  --with-curses           use the curses library instead of the termcap
+                          library
+  --with-gnu-malloc       synonym for --with-bash-malloc
+  --with-installed-readline
+                          use a version of the readline library that is
+                          already installed
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-libpth-prefix[=DIR]  search for libpth in DIR/include and DIR/lib
+  --without-libpth-prefix     don't search for libpth in includedir and libdir
+  --with-libiconv-prefix[=DIR]  search for libiconv in DIR/include and DIR/lib
+  --without-libiconv-prefix     don't search for libiconv in includedir and libdir
+  --with-included-gettext use the GNU gettext library included here
+  --with-libintl-prefix[=DIR]  search for libintl in DIR/include and DIR/lib
+  --without-libintl-prefix     don't search for libintl in includedir and libdir
+
+Some influential environment variables:
+  DEBUGGER_START_FILE
+              location of bash debugger initialization file
+  CC_FOR_BUILD
+              C compiler used when compiling binaries used only at build time
+  CFLAGS_FOR_BUILD
+              Compilation options (CFLAGS) used when compiling binaries used
+              only at build time
+  LDFLAGS_FOR_BUILD
+              Linker options (LDFLAGS) used when compiling binaries used only
+              at build time
+  CPPFLAGS_FOR_BUILD
+              C preprocessor options (CPPFLAGS) used when compiling binaries
+              used only at build time
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+  YACC        The `Yet Another Compiler Compiler' implementation to use.
+              Defaults to the first program found out of: `bison -y', `byacc',
+              `yacc'.
+  YFLAGS      The list of arguments that will be passed by default to $YACC.
+              This script will default YFLAGS to the empty string to avoid a
+              default value of `-d' given by some make applications.
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <bug-bash@gnu.org>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+bash configure 5.1-release
+generated by GNU Autoconf 2.69
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 test -x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } > conftest.i && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
+# the include files in INCLUDES and setting the cache variable VAR
+# accordingly.
+ac_fn_c_check_header_mongrel ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if eval \${$3+:} false; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+else
+  # Is the header compilable?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
+$as_echo_n "checking $2 usability... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_header_compiler=yes
+else
+  ac_header_compiler=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
+$as_echo_n "checking $2 presence... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <$2>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  ac_header_preproc=yes
+else
+  ac_header_preproc=no
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
+  yes:no: )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+    ;;
+  no:yes:* )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $2:     check for missing prerequisite headers?" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+( $as_echo "## ------------------------------- ##
+## Report this to bug-bash@gnu.org ##
+## ------------------------------- ##"
+     ) | sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
+esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=\$ac_header_compiler"
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_mongrel
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+       $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $2 (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+
+# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
+# -------------------------------------------
+# Tests whether TYPE exists after having included INCLUDES, setting cache
+# variable VAR accordingly.
+ac_fn_c_check_type ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=no"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof ($2))
+	 return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof (($2)))
+	    return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  eval "$3=yes"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_type
+
+# ac_fn_c_check_decl LINENO SYMBOL VAR INCLUDES
+# ---------------------------------------------
+# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR
+# accordingly.
+ac_fn_c_check_decl ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  as_decl_name=`echo $2|sed 's/ *(.*//'`
+  as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'`
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5
+$as_echo_n "checking whether $as_decl_name is declared... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+#ifndef $as_decl_name
+#ifdef __cplusplus
+  (void) $as_decl_use;
+#else
+  (void) $as_decl_name;
+#endif
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_decl
+
+# ac_fn_c_compute_int LINENO EXPR VAR INCLUDES
+# --------------------------------------------
+# Tries to find the compile-time value of EXPR in a program that includes
+# INCLUDES, setting VAR accordingly. Returns whether the value could be
+# computed
+ac_fn_c_compute_int ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if test "$cross_compiling" = yes; then
+    # Depending upon the size, compute the lo and hi bounds.
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) >= 0)];
+test_array [0] = 0;
+return test_array [0];
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_lo=0 ac_mid=0
+  while :; do
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) <= $ac_mid)];
+test_array [0] = 0;
+return test_array [0];
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_hi=$ac_mid; break
+else
+  as_fn_arith $ac_mid + 1 && ac_lo=$as_val
+			if test $ac_lo -le $ac_mid; then
+			  ac_lo= ac_hi=
+			  break
+			fi
+			as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  done
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) < 0)];
+test_array [0] = 0;
+return test_array [0];
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_hi=-1 ac_mid=-1
+  while :; do
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) >= $ac_mid)];
+test_array [0] = 0;
+return test_array [0];
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_lo=$ac_mid; break
+else
+  as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val
+			if test $ac_mid -le $ac_hi; then
+			  ac_lo= ac_hi=
+			  break
+			fi
+			as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  done
+else
+  ac_lo= ac_hi=
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+  as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) <= $ac_mid)];
+test_array [0] = 0;
+return test_array [0];
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_hi=$ac_mid
+else
+  as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+case $ac_lo in #((
+?*) eval "$3=\$ac_lo"; ac_retval=0 ;;
+'') ac_retval=1 ;;
+esac
+  else
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+static long int longval () { return $2; }
+static unsigned long int ulongval () { return $2; }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
+
+  FILE *f = fopen ("conftest.val", "w");
+  if (! f)
+    return 1;
+  if (($2) < 0)
+    {
+      long int i = longval ();
+      if (i != ($2))
+	return 1;
+      fprintf (f, "%ld", i);
+    }
+  else
+    {
+      unsigned long int i = ulongval ();
+      if (i != ($2))
+	return 1;
+      fprintf (f, "%lu", i);
+    }
+  /* Do not output a trailing newline, as this causes \r\n confusion
+     on some platforms.  */
+  return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  echo >>conftest.val; read $3 <conftest.val; ac_retval=0
+else
+  ac_retval=1
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+rm -f conftest.val
+
+  fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_compute_int
+
+# ac_fn_c_check_member LINENO AGGR MEMBER VAR INCLUDES
+# ----------------------------------------------------
+# Tries to find if the field MEMBER exists in type AGGR, after including
+# INCLUDES, setting cache variable VAR accordingly.
+ac_fn_c_check_member ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2.$3" >&5
+$as_echo_n "checking for $2.$3... " >&6; }
+if eval \${$4+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$5
+int
+main ()
+{
+static $2 ac_aggr;
+if (ac_aggr.$3)
+return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$4=yes"
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$5
+int
+main ()
+{
+static $2 ac_aggr;
+if (sizeof ac_aggr.$3)
+return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$4=yes"
+else
+  eval "$4=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$4
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_member
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by bash $as_me 5.1-release, which was
+generated by GNU Autoconf 2.69.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+    2)
+      as_fn_append ac_configure_args1 " '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      as_fn_append ac_configure_args " '$ac_arg'"
+      ;;
+    esac
+  done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
+
+    $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  # We do not want a PATH search for config.site.
+  case $CONFIG_SITE in #((
+    -*)  ac_site_file1=./$CONFIG_SITE;;
+    */*) ac_site_file1=$CONFIG_SITE;;
+    *)   ac_site_file1=./$CONFIG_SITE;;
+  esac
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
+  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file" \
+      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special files
+  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
+  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+gt_needs="$gt_needs need-ngettext"
+as_fn_append ac_header_list " stdlib.h"
+as_fn_append ac_header_list " unistd.h"
+as_fn_append ac_header_list " sys/param.h"
+as_fn_append ac_func_list " symlink"
+as_fn_append ac_func_list " uselocale"
+as_fn_append ac_header_list " xlocale.h"
+as_fn_append ac_header_list " sys/time.h"
+as_fn_append ac_func_list " alarm"
+as_fn_append ac_func_list " fpurge"
+as_fn_append ac_func_list " __fpurge"
+as_fn_append ac_func_list " snprintf"
+as_fn_append ac_func_list " vsnprintf"
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+
+
+ac_aux_dir=
+for ac_dir in ./support "$srcdir"/./support; do
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  as_fn_error $? "cannot find install-sh, install.sh, or shtool in ./support \"$srcdir\"/./support" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
+
+ac_config_headers="$ac_config_headers config.h"
+
+
+BASHVERS=5.1
+RELSTATUS=release
+
+case "$RELSTATUS" in
+alp*|bet*|dev*|rc*|releng*|maint*)	DEBUG='-DDEBUG' MALLOC_DEBUG='-DMALLOC_DEBUG' ;;
+*)	DEBUG= MALLOC_DEBUG= ;;
+esac
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+
+
+opt_bash_malloc=yes
+opt_afs=no
+opt_curses=no
+opt_with_installed_readline=no
+
+#htmldir=
+
+case "${host_cpu}-${host_os}" in
+# mostly obsolete platforms
+alpha*-*)	opt_bash_malloc=no ;;	# alpha running osf/1 or linux
+*[Cc]ray*-*)	opt_bash_malloc=no ;;	# Crays
+*-osf1*)	opt_bash_malloc=no ;;	# other osf/1 machines
+*-dgux*)	opt_bash_malloc=no ;;	# DG/UX machines
+sparc-svr4*)	opt_bash_malloc=no ;;	# sparc SVR4, SVR4.2
+m68k-sysv)	opt_bash_malloc=no ;;	# fixes file descriptor leak in closedir
+*-bsdi2.1|*-bsdi3.?)	opt_bash_malloc=no ; : ${CC:=shlicc2} ;; # for loadable builtins
+*-opennt*|*-interix*)	opt_bash_malloc=no ;;	# Interix, now owned by Microsoft
+*-beos*)	opt_bash_malloc=no ;;	# they say it's suitable
+# These need additional investigation
+sparc-linux*)	opt_bash_malloc=no ;;	# sparc running linux; requires ELF
+*-aix*)		opt_bash_malloc=no ;;	# AIX machines
+*-cygwin*)	opt_bash_malloc=no ;;	# Cygnus's CYGWIN environment
+# These lack a working sbrk(2)
+aarch64-freebsd*)	opt_bash_malloc=no ;;
+riscv*-freebsd*)	opt_bash_malloc=no ;;
+# Mach-derived systems have a ton of extra malloc functions and lack sbrk(2)
+*-nextstep*)	opt_bash_malloc=no ;;	# NeXT machines running NeXTstep
+*-openstep*)	opt_bash_malloc=no ;;	# i386/Sparc/HP machines running Openstep
+*-macos*)	opt_bash_malloc=no ;;	# Apple MacOS X
+*-rhapsody*)	opt_bash_malloc=no ;;	# Apple Rhapsody (MacOS X)
+*-darwin*)	opt_bash_malloc=no ;;	# Apple Darwin (MacOS X)
+*-machten4)	opt_bash_malloc=no ;;	# MachTen 4.x
+# Niche or non-mainstream-shell-user systems
+*-qnx*)		opt_bash_malloc=no ;;	# QNX 4.2, QNX [67].x
+*-nsk*)		opt_bash_malloc=no ;;	# HP NonStop
+*-haiku*)	opt_bash_malloc=no ;;	# Haiku OS
+*-genode*)	opt_bash_malloc=no ;;	# Genode has no sbrk
+esac
+
+# memory scrambling on free()
+case "${host_os}" in
+sco3.2v5*|sco3.2v4*)	opt_memscramble=no ;;
+*)			opt_memscramble=yes ;;
+esac
+
+
+
+
+# Check whether --with-afs was given.
+if test "${with_afs+set}" = set; then :
+  withval=$with_afs; opt_afs=$withval
+fi
+
+
+# Check whether --with-bash-malloc was given.
+if test "${with_bash_malloc+set}" = set; then :
+  withval=$with_bash_malloc; opt_bash_malloc=$withval
+fi
+
+
+# Check whether --with-curses was given.
+if test "${with_curses+set}" = set; then :
+  withval=$with_curses; opt_curses=$withval
+fi
+
+
+# Check whether --with-gnu-malloc was given.
+if test "${with_gnu_malloc+set}" = set; then :
+  withval=$with_gnu_malloc; opt_bash_malloc=$withval
+fi
+
+
+# Check whether --with-installed-readline was given.
+if test "${with_installed_readline+set}" = set; then :
+  withval=$with_installed_readline; opt_with_installed_readline=$withval
+fi
+
+
+if test "$opt_bash_malloc" = yes; then
+	MALLOC_TARGET=malloc
+	MALLOC_SRC=malloc.c
+
+	MALLOC_LIB='-lmalloc'
+	MALLOC_LIBRARY='$(ALLOC_LIBDIR)/libmalloc.a'
+	MALLOC_LDFLAGS='-L$(ALLOC_LIBDIR)'
+	MALLOC_DEP='$(MALLOC_LIBRARY)'
+
+	$as_echo "#define USING_BASH_MALLOC 1" >>confdefs.h
+
+else
+	MALLOC_LIB=
+	MALLOC_LIBRARY=
+	MALLOC_LDFLAGS=
+	MALLOC_DEP=
+fi
+
+if test "$opt_afs" = yes; then
+	$as_echo "#define AFS 1" >>confdefs.h
+
+fi
+
+if test "$opt_curses" = yes; then
+	prefer_curses=yes
+fi
+
+if test -z "${DEBUGGER_START_FILE}"; then
+	DEBUGGER_START_FILE='${datadir}/bashdb/bashdb-main.inc'
+fi
+
+opt_minimal_config=no
+
+opt_job_control=yes
+opt_alias=yes
+opt_readline=yes
+opt_history=yes
+opt_bang_history=yes
+opt_dirstack=yes
+opt_restricted=yes
+opt_process_subst=yes
+opt_prompt_decoding=yes
+opt_select=yes
+opt_help=yes
+opt_array_variables=yes
+opt_dparen_arith=yes
+opt_extended_glob=yes
+opt_brace_expansion=yes
+opt_disabled_builtins=no
+opt_command_timing=yes
+opt_xpg_echo=no
+opt_strict_posix=no
+opt_cond_command=yes
+opt_cond_regexp=yes
+opt_coproc=yes
+opt_arith_for_command=yes
+opt_net_redirs=yes
+opt_progcomp=yes
+opt_separate_help=no
+opt_multibyte=yes
+opt_debugger=yes
+opt_single_longdoc_strings=yes
+opt_casemod_attrs=yes
+opt_casemod_expansions=yes
+opt_extglob_default=no
+opt_dircomplete_expand_default=no
+opt_globascii_default=yes
+opt_function_import=yes
+opt_dev_fd_stat_broken=no
+
+opt_static_link=no
+opt_profiling=no
+
+# Check whether --enable-minimal-config was given.
+if test "${enable_minimal_config+set}" = set; then :
+  enableval=$enable_minimal_config; opt_minimal_config=$enableval
+fi
+
+
+if test $opt_minimal_config = yes; then
+	opt_job_control=no opt_alias=no opt_readline=no
+	opt_history=no opt_bang_history=no opt_dirstack=no
+	opt_restricted=no opt_process_subst=no opt_prompt_decoding=no
+	opt_select=no opt_help=no opt_array_variables=no opt_dparen_arith=no
+	opt_brace_expansion=no opt_disabled_builtins=no opt_command_timing=no
+	opt_extended_glob=no opt_cond_command=no opt_arith_for_command=no
+	opt_net_redirs=no opt_progcomp=no opt_separate_help=no
+	opt_multibyte=yes opt_cond_regexp=no opt_coproc=no
+	opt_casemod_attrs=no opt_casemod_expansions=no opt_extglob_default=no
+	opt_globascii_default=yes
+fi
+
+# Check whether --enable-alias was given.
+if test "${enable_alias+set}" = set; then :
+  enableval=$enable_alias; opt_alias=$enableval
+fi
+
+# Check whether --enable-arith-for-command was given.
+if test "${enable_arith_for_command+set}" = set; then :
+  enableval=$enable_arith_for_command; opt_arith_for_command=$enableval
+fi
+
+# Check whether --enable-array-variables was given.
+if test "${enable_array_variables+set}" = set; then :
+  enableval=$enable_array_variables; opt_array_variables=$enableval
+fi
+
+# Check whether --enable-bang-history was given.
+if test "${enable_bang_history+set}" = set; then :
+  enableval=$enable_bang_history; opt_bang_history=$enableval
+fi
+
+# Check whether --enable-brace-expansion was given.
+if test "${enable_brace_expansion+set}" = set; then :
+  enableval=$enable_brace_expansion; opt_brace_expansion=$enableval
+fi
+
+# Check whether --enable-casemod-attributes was given.
+if test "${enable_casemod_attributes+set}" = set; then :
+  enableval=$enable_casemod_attributes; opt_casemod_attrs=$enableval
+fi
+
+# Check whether --enable-casemod-expansions was given.
+if test "${enable_casemod_expansions+set}" = set; then :
+  enableval=$enable_casemod_expansions; opt_casemod_expansions=$enableval
+fi
+
+# Check whether --enable-command-timing was given.
+if test "${enable_command_timing+set}" = set; then :
+  enableval=$enable_command_timing; opt_command_timing=$enableval
+fi
+
+# Check whether --enable-cond-command was given.
+if test "${enable_cond_command+set}" = set; then :
+  enableval=$enable_cond_command; opt_cond_command=$enableval
+fi
+
+# Check whether --enable-cond-regexp was given.
+if test "${enable_cond_regexp+set}" = set; then :
+  enableval=$enable_cond_regexp; opt_cond_regexp=$enableval
+fi
+
+# Check whether --enable-coprocesses was given.
+if test "${enable_coprocesses+set}" = set; then :
+  enableval=$enable_coprocesses; opt_coproc=$enableval
+fi
+
+# Check whether --enable-debugger was given.
+if test "${enable_debugger+set}" = set; then :
+  enableval=$enable_debugger; opt_debugger=$enableval
+fi
+
+# Check whether --enable-dev-fd-stat-broken was given.
+if test "${enable_dev_fd_stat_broken+set}" = set; then :
+  enableval=$enable_dev_fd_stat_broken; opt_dev_fd_stat_broken=$enableval
+fi
+
+# Check whether --enable-direxpand-default was given.
+if test "${enable_direxpand_default+set}" = set; then :
+  enableval=$enable_direxpand_default; opt_dircomplete_expand_default=$enableval
+fi
+
+# Check whether --enable-directory-stack was given.
+if test "${enable_directory_stack+set}" = set; then :
+  enableval=$enable_directory_stack; opt_dirstack=$enableval
+fi
+
+# Check whether --enable-disabled-builtins was given.
+if test "${enable_disabled_builtins+set}" = set; then :
+  enableval=$enable_disabled_builtins; opt_disabled_builtins=$enableval
+fi
+
+# Check whether --enable-dparen-arithmetic was given.
+if test "${enable_dparen_arithmetic+set}" = set; then :
+  enableval=$enable_dparen_arithmetic; opt_dparen_arith=$enableval
+fi
+
+# Check whether --enable-extended-glob was given.
+if test "${enable_extended_glob+set}" = set; then :
+  enableval=$enable_extended_glob; opt_extended_glob=$enableval
+fi
+
+# Check whether --enable-extended-glob-default was given.
+if test "${enable_extended_glob_default+set}" = set; then :
+  enableval=$enable_extended_glob_default; opt_extglob_default=$enableval
+fi
+
+# Check whether --enable-function-import was given.
+if test "${enable_function_import+set}" = set; then :
+  enableval=$enable_function_import; opt_function_import=$enableval
+fi
+
+# Check whether --enable-glob-asciiranges-default was given.
+if test "${enable_glob_asciiranges_default+set}" = set; then :
+  enableval=$enable_glob_asciiranges_default; opt_globascii_default=$enableval
+fi
+
+# Check whether --enable-help-builtin was given.
+if test "${enable_help_builtin+set}" = set; then :
+  enableval=$enable_help_builtin; opt_help=$enableval
+fi
+
+# Check whether --enable-history was given.
+if test "${enable_history+set}" = set; then :
+  enableval=$enable_history; opt_history=$enableval
+fi
+
+# Check whether --enable-job-control was given.
+if test "${enable_job_control+set}" = set; then :
+  enableval=$enable_job_control; opt_job_control=$enableval
+fi
+
+# Check whether --enable-multibyte was given.
+if test "${enable_multibyte+set}" = set; then :
+  enableval=$enable_multibyte; opt_multibyte=$enableval
+fi
+
+# Check whether --enable-net-redirections was given.
+if test "${enable_net_redirections+set}" = set; then :
+  enableval=$enable_net_redirections; opt_net_redirs=$enableval
+fi
+
+# Check whether --enable-process-substitution was given.
+if test "${enable_process_substitution+set}" = set; then :
+  enableval=$enable_process_substitution; opt_process_subst=$enableval
+fi
+
+# Check whether --enable-progcomp was given.
+if test "${enable_progcomp+set}" = set; then :
+  enableval=$enable_progcomp; opt_progcomp=$enableval
+fi
+
+# Check whether --enable-prompt-string-decoding was given.
+if test "${enable_prompt_string_decoding+set}" = set; then :
+  enableval=$enable_prompt_string_decoding; opt_prompt_decoding=$enableval
+fi
+
+# Check whether --enable-readline was given.
+if test "${enable_readline+set}" = set; then :
+  enableval=$enable_readline; opt_readline=$enableval
+fi
+
+# Check whether --enable-restricted was given.
+if test "${enable_restricted+set}" = set; then :
+  enableval=$enable_restricted; opt_restricted=$enableval
+fi
+
+# Check whether --enable-select was given.
+if test "${enable_select+set}" = set; then :
+  enableval=$enable_select; opt_select=$enableval
+fi
+
+# Check whether --enable-separate-helpfiles was given.
+if test "${enable_separate_helpfiles+set}" = set; then :
+  enableval=$enable_separate_helpfiles; opt_separate_help=$enableval
+fi
+
+# Check whether --enable-single-help-strings was given.
+if test "${enable_single_help_strings+set}" = set; then :
+  enableval=$enable_single_help_strings; opt_single_longdoc_strings=$enableval
+fi
+
+# Check whether --enable-strict-posix-default was given.
+if test "${enable_strict_posix_default+set}" = set; then :
+  enableval=$enable_strict_posix_default; opt_strict_posix=$enableval
+fi
+
+# Check whether --enable-usg-echo-default was given.
+if test "${enable_usg_echo_default+set}" = set; then :
+  enableval=$enable_usg_echo_default; opt_xpg_echo=$enableval
+fi
+
+# Check whether --enable-xpg-echo-default was given.
+if test "${enable_xpg_echo_default+set}" = set; then :
+  enableval=$enable_xpg_echo_default; opt_xpg_echo=$enableval
+fi
+
+
+# Check whether --enable-mem-scramble was given.
+if test "${enable_mem_scramble+set}" = set; then :
+  enableval=$enable_mem_scramble; opt_memscramble=$enableval
+fi
+
+# Check whether --enable-profiling was given.
+if test "${enable_profiling+set}" = set; then :
+  enableval=$enable_profiling; opt_profiling=$enableval
+fi
+
+# Check whether --enable-static-link was given.
+if test "${enable_static_link+set}" = set; then :
+  enableval=$enable_static_link; opt_static_link=$enableval
+fi
+
+
+
+
+
+
+
+
+
+if test $opt_alias = yes; then
+$as_echo "#define ALIAS 1" >>confdefs.h
+
+fi
+if test $opt_dirstack = yes; then
+$as_echo "#define PUSHD_AND_POPD 1" >>confdefs.h
+
+fi
+if test $opt_restricted = yes; then
+$as_echo "#define RESTRICTED_SHELL 1" >>confdefs.h
+
+fi
+if test $opt_process_subst = yes; then
+$as_echo "#define PROCESS_SUBSTITUTION 1" >>confdefs.h
+
+fi
+if test $opt_prompt_decoding = yes; then
+$as_echo "#define PROMPT_STRING_DECODE 1" >>confdefs.h
+
+fi
+if test $opt_select = yes; then
+$as_echo "#define SELECT_COMMAND 1" >>confdefs.h
+
+fi
+if test $opt_help = yes; then
+$as_echo "#define HELP_BUILTIN 1" >>confdefs.h
+
+fi
+if test $opt_array_variables = yes; then
+$as_echo "#define ARRAY_VARS 1" >>confdefs.h
+
+fi
+if test $opt_dparen_arith = yes; then
+$as_echo "#define DPAREN_ARITHMETIC 1" >>confdefs.h
+
+fi
+if test $opt_brace_expansion = yes; then
+$as_echo "#define BRACE_EXPANSION 1" >>confdefs.h
+
+fi
+if test $opt_disabled_builtins = yes; then
+$as_echo "#define DISABLED_BUILTINS 1" >>confdefs.h
+
+fi
+if test $opt_command_timing = yes; then
+$as_echo "#define COMMAND_TIMING 1" >>confdefs.h
+
+fi
+if test $opt_xpg_echo = yes ; then
+$as_echo "#define DEFAULT_ECHO_TO_XPG 1" >>confdefs.h
+
+fi
+if test $opt_strict_posix = yes; then
+$as_echo "#define STRICT_POSIX 1" >>confdefs.h
+
+fi
+if test $opt_extended_glob = yes ; then
+$as_echo "#define EXTENDED_GLOB 1" >>confdefs.h
+
+fi
+if test $opt_extglob_default = yes; then
+$as_echo "#define EXTGLOB_DEFAULT 1" >>confdefs.h
+
+else
+$as_echo "#define EXTGLOB_DEFAULT 0" >>confdefs.h
+
+fi
+if test $opt_cond_command = yes ; then
+$as_echo "#define COND_COMMAND 1" >>confdefs.h
+
+fi
+if test $opt_cond_regexp = yes ; then
+$as_echo "#define COND_REGEXP 1" >>confdefs.h
+
+fi
+if test $opt_coproc = yes; then
+$as_echo "#define COPROCESS_SUPPORT 1" >>confdefs.h
+
+fi
+if test $opt_arith_for_command = yes; then
+$as_echo "#define ARITH_FOR_COMMAND 1" >>confdefs.h
+
+fi
+if test $opt_net_redirs = yes; then
+$as_echo "#define NETWORK_REDIRECTIONS 1" >>confdefs.h
+
+fi
+if test $opt_progcomp = yes; then
+$as_echo "#define PROGRAMMABLE_COMPLETION 1" >>confdefs.h
+
+fi
+if test $opt_multibyte = no; then
+$as_echo "#define NO_MULTIBYTE_SUPPORT 1" >>confdefs.h
+
+fi
+if test $opt_debugger = yes; then
+$as_echo "#define DEBUGGER 1" >>confdefs.h
+
+fi
+if test $opt_casemod_attrs = yes; then
+$as_echo "#define CASEMOD_ATTRS 1" >>confdefs.h
+
+fi
+if test $opt_casemod_expansions = yes; then
+$as_echo "#define CASEMOD_EXPANSIONS 1" >>confdefs.h
+
+fi
+if test $opt_dircomplete_expand_default = yes; then
+$as_echo "#define DIRCOMPLETE_EXPAND_DEFAULT 1" >>confdefs.h
+
+fi
+if test $opt_globascii_default = yes; then
+$as_echo "#define GLOBASCII_DEFAULT 1" >>confdefs.h
+
+else
+$as_echo "#define GLOBASCII_DEFAULT 0" >>confdefs.h
+
+fi
+if test $opt_function_import = yes; then
+$as_echo "#define FUNCTION_IMPORT 1" >>confdefs.h
+
+fi
+if test $opt_dev_fd_stat_broken = yes; then
+$as_echo "#define DEV_FD_STAT_BROKEN 1" >>confdefs.h
+
+fi
+
+if test $opt_memscramble = yes; then
+$as_echo "#define MEMSCRAMBLE 1" >>confdefs.h
+
+fi
+
+if test "$opt_minimal_config" = yes; then
+	TESTSCRIPT=run-minimal
+else
+	TESTSCRIPT=run-all
+fi
+
+HELPDIR= HELPDIRDEFINE= HELPINSTALL= HELPFILES_TARGET=
+if test "$opt_separate_help" != no; then
+	if test "$opt_separate_help" = "yes" ; then
+		HELPDIR='${datadir}/bash'
+	else
+		HELPDIR=$opt_separate_help
+	fi
+	HELPDIRDEFINE='-H ${HELPDIR}'
+	HELPINSTALL='install-help'
+	HELPFILES_TARGET='helpdoc'
+fi
+HELPSTRINGS=
+if test "$opt_single_longdoc_strings" != "yes"; then
+	HELPSTRINGS='-S'
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -z "$CFLAGS"; then
+	want_auto_cflags=1
+fi
+
+echo ""
+echo "Beginning configuration for bash-$BASHVERS-$RELSTATUS for ${host_cpu}-${host_vendor}-${host_os}"
+echo ""
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link_default") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+	;;
+    [ab].out )
+	# We found the default executable, but exeext='' is most
+	# certainly right.
+	break;;
+    *.* )
+	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
+	break;;
+    * )
+	break;;
+  esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+  ac_file=''
+fi
+if test -z "$ac_file"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	  break;;
+    * ) break;;
+  esac
+done
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+  { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+  if { ac_try='./conftest$ac_cv_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+    fi
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+else
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+struct stat;
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+if test -n "$want_auto_cflags"; then
+	AUTO_CFLAGS="-g ${GCC+-O2}"
+	AUTO_LDFLAGS="-g ${GCC+-O2}"
+	STYLE_CFLAGS="${GCC+-Wno-parentheses} ${GCC+-Wno-format-security}"
+else
+	AUTO_CFLAGS= AUTO_LDFLAGS= STYLE_CFLAGS=
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing strerror" >&5
+$as_echo_n "checking for library containing strerror... " >&6; }
+if ${ac_cv_search_strerror+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char strerror ();
+int
+main ()
+{
+return strerror ();
+  ;
+  return 0;
+}
+_ACEOF
+for ac_lib in '' cposix; do
+  if test -z "$ac_lib"; then
+    ac_res="none required"
+  else
+    ac_res=-l$ac_lib
+    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
+  fi
+  if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_search_strerror=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if ${ac_cv_search_strerror+:} false; then :
+  break
+fi
+done
+if ${ac_cv_search_strerror+:} false; then :
+
+else
+  ac_cv_search_strerror=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_strerror" >&5
+$as_echo "$ac_cv_search_strerror" >&6; }
+ac_res=$ac_cv_search_strerror
+if test "$ac_res" != no; then :
+  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if ${ac_cv_prog_CPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$GREP"; then
+  ac_path_GREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in grep ggrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_GREP" || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_GREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_GREP"; then
+    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     if test -z "$EGREP"; then
+  ac_path_EGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in egrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_EGREP" || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_EGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_EGREP"; then
+    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_EGREP=$EGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+  ac_fn_c_check_header_mongrel "$LINENO" "minix/config.h" "ac_cv_header_minix_config_h" "$ac_includes_default"
+if test "x$ac_cv_header_minix_config_h" = xyes; then :
+  MINIX=yes
+else
+  MINIX=
+fi
+
+
+  if test "$MINIX" = yes; then
+
+$as_echo "#define _POSIX_SOURCE 1" >>confdefs.h
+
+
+$as_echo "#define _POSIX_1_SOURCE 2" >>confdefs.h
+
+
+$as_echo "#define _MINIX 1" >>confdefs.h
+
+  fi
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether it is safe to define __EXTENSIONS__" >&5
+$as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; }
+if ${ac_cv_safe_to_define___extensions__+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#         define __EXTENSIONS__ 1
+          $ac_includes_default
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_safe_to_define___extensions__=yes
+else
+  ac_cv_safe_to_define___extensions__=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_safe_to_define___extensions__" >&5
+$as_echo "$ac_cv_safe_to_define___extensions__" >&6; }
+  test $ac_cv_safe_to_define___extensions__ = yes &&
+    $as_echo "#define __EXTENSIONS__ 1" >>confdefs.h
+
+  $as_echo "#define _ALL_SOURCE 1" >>confdefs.h
+
+  $as_echo "#define _GNU_SOURCE 1" >>confdefs.h
+
+  $as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h
+
+  $as_echo "#define _TANDEM_SOURCE 1" >>confdefs.h
+
+
+
+
+# Check whether --enable-largefile was given.
+if test "${enable_largefile+set}" = set; then :
+  enableval=$enable_largefile;
+fi
+
+if test "$enable_largefile" != no; then
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for special C compiler options needed for large files" >&5
+$as_echo_n "checking for special C compiler options needed for large files... " >&6; }
+if ${ac_cv_sys_largefile_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_sys_largefile_CC=no
+     if test "$GCC" != yes; then
+       ac_save_CC=$CC
+       while :; do
+	 # IRIX 6.2 and later do not support large files by default,
+	 # so use the C compiler's -n32 option if that helps.
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+    We can't simply define LARGE_OFF_T to be 9223372036854775807,
+    since some C++ compilers masquerading as C compilers
+    incorrectly reject 9223372036854775807.  */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+		       && LARGE_OFF_T % 2147483647 == 1)
+		      ? 1 : -1];
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+	 if ac_fn_c_try_compile "$LINENO"; then :
+  break
+fi
+rm -f core conftest.err conftest.$ac_objext
+	 CC="$CC -n32"
+	 if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_sys_largefile_CC=' -n32'; break
+fi
+rm -f core conftest.err conftest.$ac_objext
+	 break
+       done
+       CC=$ac_save_CC
+       rm -f conftest.$ac_ext
+    fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_largefile_CC" >&5
+$as_echo "$ac_cv_sys_largefile_CC" >&6; }
+  if test "$ac_cv_sys_largefile_CC" != no; then
+    CC=$CC$ac_cv_sys_largefile_CC
+  fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _FILE_OFFSET_BITS value needed for large files" >&5
+$as_echo_n "checking for _FILE_OFFSET_BITS value needed for large files... " >&6; }
+if ${ac_cv_sys_file_offset_bits+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  while :; do
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+    We can't simply define LARGE_OFF_T to be 9223372036854775807,
+    since some C++ compilers masquerading as C compilers
+    incorrectly reject 9223372036854775807.  */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+		       && LARGE_OFF_T % 2147483647 == 1)
+		      ? 1 : -1];
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_sys_file_offset_bits=no; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#define _FILE_OFFSET_BITS 64
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+    We can't simply define LARGE_OFF_T to be 9223372036854775807,
+    since some C++ compilers masquerading as C compilers
+    incorrectly reject 9223372036854775807.  */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+		       && LARGE_OFF_T % 2147483647 == 1)
+		      ? 1 : -1];
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_sys_file_offset_bits=64; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  ac_cv_sys_file_offset_bits=unknown
+  break
+done
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_file_offset_bits" >&5
+$as_echo "$ac_cv_sys_file_offset_bits" >&6; }
+case $ac_cv_sys_file_offset_bits in #(
+  no | unknown) ;;
+  *)
+cat >>confdefs.h <<_ACEOF
+#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits
+_ACEOF
+;;
+esac
+rm -rf conftest*
+  if test $ac_cv_sys_file_offset_bits = unknown; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _LARGE_FILES value needed for large files" >&5
+$as_echo_n "checking for _LARGE_FILES value needed for large files... " >&6; }
+if ${ac_cv_sys_large_files+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  while :; do
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+    We can't simply define LARGE_OFF_T to be 9223372036854775807,
+    since some C++ compilers masquerading as C compilers
+    incorrectly reject 9223372036854775807.  */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+		       && LARGE_OFF_T % 2147483647 == 1)
+		      ? 1 : -1];
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_sys_large_files=no; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#define _LARGE_FILES 1
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+    We can't simply define LARGE_OFF_T to be 9223372036854775807,
+    since some C++ compilers masquerading as C compilers
+    incorrectly reject 9223372036854775807.  */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+		       && LARGE_OFF_T % 2147483647 == 1)
+		      ? 1 : -1];
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_sys_large_files=1; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  ac_cv_sys_large_files=unknown
+  break
+done
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_large_files" >&5
+$as_echo "$ac_cv_sys_large_files" >&6; }
+case $ac_cv_sys_large_files in #(
+  no | unknown) ;;
+  *)
+cat >>confdefs.h <<_ACEOF
+#define _LARGE_FILES $ac_cv_sys_large_files
+_ACEOF
+;;
+esac
+rm -rf conftest*
+  fi
+
+
+fi
+
+
+
+SIGNAMES_O=
+SIGNAMES_H=lsignames.h
+
+
+
+CROSS_COMPILE=
+if test "x$cross_compiling" = "xyes"; then
+    case "${host}" in
+    *-cygwin*)
+	cross_cache=${srcdir}/cross-build/cygwin32.cache
+	;;
+    *-mingw*)
+	cross_cache=${srcdir}/cross-build/cygwin32.cache
+	;;
+    i[3456]86-*-beos*)
+	cross_cache=${srcdir}/cross-build/x86-beos.cache
+	;;
+    *-qnx*)
+	cross_cache=${srcdir}/cross-build/qnx.cache
+	;;
+    *)	echo "configure: cross-compiling for $host is not supported" >&2
+	;;
+    esac
+    if test -n "${cross_cache}" && test -r "${cross_cache}"; then
+	echo "loading cross-build cache file ${cross_cache}"
+	. ${cross_cache}
+    fi
+    unset cross_cache
+    SIGNAMES_O='signames.o'
+    CROSS_COMPILE='-DCROSS_COMPILING'
+
+fi
+
+
+
+
+CFLAGS=${CFLAGS-"$AUTO_CFLAGS"}
+# LDFLAGS=${LDFLAGS="$AUTO_LDFLAGS"}	# XXX
+
+if test "$opt_profiling" = "yes"; then
+	PROFILE_FLAGS=-pg
+	case "$host_os" in
+	solaris2*|linux*)	;;
+	*)		opt_static_link=yes ;;
+	esac
+	DEBUG= MALLOC_DEBUG=
+fi
+
+prefer_shared=yes
+prefer_static=no
+
+if test "$opt_static_link" = yes; then
+	prefer_static=yes
+	prefer_shared=no
+	# if we're using gcc, add `-static' to LDFLAGS, except on Solaris >= 2
+	if test -n "$GCC" || test "$ac_cv_c_compiler_gnu" = "yes"; then
+		STATIC_LD="-static"
+		case "$host_os" in
+		solaris2*|linux*)	;;
+		*)		LDFLAGS="$LDFLAGS -static" ;;	# XXX experimental
+		esac
+	fi
+fi
+
+# set the appropriate make variables for building the "build tools"
+# modify defaults based on whether or not we are cross compiling, since the
+# options for the target host may not be appropriate for the build host
+if test "X$cross_compiling" = "Xno"; then
+	CC_FOR_BUILD=${CC_FOR_BUILD-'$(CC)'}
+	CPPFLAGS_FOR_BUILD=${CPPFLAGS_FOR_BUILD-"$CPPFLAGS"}	# XXX - should it be '$(CPPFLAGS)'
+	if test X"$opt_profiling" = Xyes; then
+		LDFLAGS_FOR_BUILD=${LDFLAGS_FOR_BUILD-'$(BASE_LDFLAGS)'}
+	else
+		LDFLAGS_FOR_BUILD=${LDFLAGS_FOR_BUILD-'$(LDFLAGS)'}
+	fi
+	# CFLAGS set above to default value if not passed in environment
+	if test -n "$want_auto_cflags" ; then
+		CFLAGS_FOR_BUILD="${CFLAGS} ${STYLE_CFLAGS}"
+	else
+		CFLAGS_FOR_BUILD=${CFLAGS-'$(CFLAGS)'}
+	fi
+	LIBS_FOR_BUILD=${LIBS_FOR_BUILD-'$(LIBS)'}
+else
+	CC_FOR_BUILD=${CC_FOR_BUILD-"gcc"}
+	CPPFLAGS_FOR_BUILD=${CPPFLAGS_FOR_BUILD-""}
+	LDFLAGS_FOR_BUILD=${LDFLAGS_FOR_BUILD-""}
+	CFLAGS_FOR_BUILD=${CFLAGS_FOR_BUILD="-g"}
+	LIBS_FOR_BUILD=${LIBS_FOR_BUILD-""}
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+if test $ac_cv_c_compiler_gnu = yes; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC needs -traditional" >&5
+$as_echo_n "checking whether $CC needs -traditional... " >&6; }
+if ${ac_cv_prog_gcc_traditional+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+    ac_pattern="Autoconf.*'x'"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sgtty.h>
+Autoconf TIOCGETP
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "$ac_pattern" >/dev/null 2>&1; then :
+  ac_cv_prog_gcc_traditional=yes
+else
+  ac_cv_prog_gcc_traditional=no
+fi
+rm -f conftest*
+
+
+  if test $ac_cv_prog_gcc_traditional = no; then
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <termio.h>
+Autoconf TCGETA
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "$ac_pattern" >/dev/null 2>&1; then :
+  ac_cv_prog_gcc_traditional=yes
+fi
+rm -f conftest*
+
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_gcc_traditional" >&5
+$as_echo "$ac_cv_prog_gcc_traditional" >&6; }
+  if test $ac_cv_prog_gcc_traditional = yes; then
+    CC="$CC -traditional"
+  fi
+fi
+
+
+
+if test "$opt_readline" = yes && test "$opt_with_installed_readline" != "no"
+then
+	# If the user specified --with-installed-readline=PREFIX and PREFIX
+	# is not `yes', set ac_cv_rl_prefix to PREFIX
+	test $opt_with_installed_readline != "yes" && ac_cv_rl_prefix=$opt_with_installed_readline
+
+
+if test "X$bash_cv_termcap_lib" = "X"; then
+_bash_needmsg=yes
+else
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking which library has the termcap functions" >&5
+$as_echo_n "checking which library has the termcap functions... " >&6; }
+_bash_needmsg=
+fi
+if ${bash_cv_termcap_lib+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_fn_c_check_func "$LINENO" "tgetent" "ac_cv_func_tgetent"
+if test "x$ac_cv_func_tgetent" = xyes; then :
+  bash_cv_termcap_lib=libc
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -ltermcap" >&5
+$as_echo_n "checking for tgetent in -ltermcap... " >&6; }
+if ${ac_cv_lib_termcap_tgetent+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ltermcap  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char tgetent ();
+int
+main ()
+{
+return tgetent ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_termcap_tgetent=yes
+else
+  ac_cv_lib_termcap_tgetent=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_termcap_tgetent" >&5
+$as_echo "$ac_cv_lib_termcap_tgetent" >&6; }
+if test "x$ac_cv_lib_termcap_tgetent" = xyes; then :
+  bash_cv_termcap_lib=libtermcap
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -ltinfo" >&5
+$as_echo_n "checking for tgetent in -ltinfo... " >&6; }
+if ${ac_cv_lib_tinfo_tgetent+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ltinfo  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char tgetent ();
+int
+main ()
+{
+return tgetent ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_tinfo_tgetent=yes
+else
+  ac_cv_lib_tinfo_tgetent=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_tinfo_tgetent" >&5
+$as_echo "$ac_cv_lib_tinfo_tgetent" >&6; }
+if test "x$ac_cv_lib_tinfo_tgetent" = xyes; then :
+  bash_cv_termcap_lib=libtinfo
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -lcurses" >&5
+$as_echo_n "checking for tgetent in -lcurses... " >&6; }
+if ${ac_cv_lib_curses_tgetent+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lcurses  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char tgetent ();
+int
+main ()
+{
+return tgetent ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_curses_tgetent=yes
+else
+  ac_cv_lib_curses_tgetent=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_curses_tgetent" >&5
+$as_echo "$ac_cv_lib_curses_tgetent" >&6; }
+if test "x$ac_cv_lib_curses_tgetent" = xyes; then :
+  bash_cv_termcap_lib=libcurses
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -lncurses" >&5
+$as_echo_n "checking for tgetent in -lncurses... " >&6; }
+if ${ac_cv_lib_ncurses_tgetent+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lncurses  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char tgetent ();
+int
+main ()
+{
+return tgetent ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_ncurses_tgetent=yes
+else
+  ac_cv_lib_ncurses_tgetent=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ncurses_tgetent" >&5
+$as_echo "$ac_cv_lib_ncurses_tgetent" >&6; }
+if test "x$ac_cv_lib_ncurses_tgetent" = xyes; then :
+  bash_cv_termcap_lib=libncurses
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -lncursesw" >&5
+$as_echo_n "checking for tgetent in -lncursesw... " >&6; }
+if ${ac_cv_lib_ncursesw_tgetent+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lncursesw  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char tgetent ();
+int
+main ()
+{
+return tgetent ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_ncursesw_tgetent=yes
+else
+  ac_cv_lib_ncursesw_tgetent=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ncursesw_tgetent" >&5
+$as_echo "$ac_cv_lib_ncursesw_tgetent" >&6; }
+if test "x$ac_cv_lib_ncursesw_tgetent" = xyes; then :
+  bash_cv_termcap_lib=libncursesw
+else
+  bash_cv_termcap_lib=gnutermcap
+fi
+
+fi
+
+fi
+
+fi
+
+fi
+
+fi
+
+fi
+
+if test "X$_bash_needmsg" = "Xyes"; then
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking which library has the termcap functions" >&5
+$as_echo_n "checking which library has the termcap functions... " >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: using $bash_cv_termcap_lib" >&5
+$as_echo "using $bash_cv_termcap_lib" >&6; }
+if test $bash_cv_termcap_lib = gnutermcap && test -z "$prefer_curses"; then
+LDFLAGS="$LDFLAGS -L./lib/termcap"
+TERMCAP_LIB="./lib/termcap/libtermcap.a"
+TERMCAP_DEP="./lib/termcap/libtermcap.a"
+elif test $bash_cv_termcap_lib = libtermcap && test -z "$prefer_curses"; then
+TERMCAP_LIB=-ltermcap
+TERMCAP_DEP=
+elif test $bash_cv_termcap_lib = libtinfo; then
+TERMCAP_LIB=-ltinfo
+TERMCAP_DEP=
+elif test $bash_cv_termcap_lib = libncurses; then
+TERMCAP_LIB=-lncurses
+TERMCAP_DEP=
+elif test $bash_cv_termcap_lib = libc; then
+TERMCAP_LIB=
+TERMCAP_DEP=
+else
+TERMCAP_LIB=-lcurses
+TERMCAP_DEP=
+fi
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking version of installed readline library" >&5
+$as_echo_n "checking version of installed readline library... " >&6; }
+
+# What a pain in the ass this is.
+
+# save cpp and ld options
+_save_CFLAGS="$CFLAGS"
+_save_LDFLAGS="$LDFLAGS"
+_save_LIBS="$LIBS"
+
+# Don't set ac_cv_rl_prefix if the caller has already assigned a value.  This
+# allows the caller to do something like $_rl_prefix=$withval if the user
+# specifies --with-installed-readline=PREFIX as an argument to configure
+
+if test -z "$ac_cv_rl_prefix"; then
+test "x$prefix" = xNONE && ac_cv_rl_prefix=$ac_default_prefix || ac_cv_rl_prefix=${prefix}
+fi
+
+eval ac_cv_rl_includedir=${ac_cv_rl_prefix}/include
+eval ac_cv_rl_libdir=${ac_cv_rl_prefix}/lib
+
+LIBS="$LIBS -lreadline ${TERMCAP_LIB}"
+CFLAGS="$CFLAGS -I${ac_cv_rl_includedir}"
+LDFLAGS="$LDFLAGS -L${ac_cv_rl_libdir}"
+
+if ${ac_cv_rl_version+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ac_cv_rl_version='8.0'
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <stdio.h>
+#include <readline/readline.h>
+#include <stdlib.h>
+
+extern int rl_gnu_readline_p;
+
+int
+main()
+{
+	FILE *fp;
+	fp = fopen("conftest.rlv", "w");
+	if (fp == 0)
+		exit(1);
+	if (rl_gnu_readline_p != 1)
+		fprintf(fp, "0.0\n");
+	else
+		fprintf(fp, "%s\n", rl_library_version ? rl_library_version : "0.0");
+	fclose(fp);
+	exit(0);
+}
+
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_rl_version=`cat conftest.rlv`
+else
+  ac_cv_rl_version='0.0'
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+
+
+CFLAGS="$_save_CFLAGS"
+LDFLAGS="$_save_LDFLAGS"
+LIBS="$_save_LIBS"
+
+RL_MAJOR=0
+RL_MINOR=0
+
+# (
+case "$ac_cv_rl_version" in
+2*|3*|4*|5*|6*|7*|8*|9*)
+	RL_MAJOR=`echo $ac_cv_rl_version | sed 's:\..*$::'`
+	RL_MINOR=`echo $ac_cv_rl_version | sed -e 's:^.*\.::' -e 's:[a-zA-Z]*$::'`
+	;;
+esac
+
+# (((
+case $RL_MAJOR in
+[0-9][0-9])	_RL_MAJOR=$RL_MAJOR ;;
+[0-9])	_RL_MAJOR=0$RL_MAJOR ;;
+*)		_RL_MAJOR=00 ;;
+esac
+
+# (((
+case $RL_MINOR in
+[0-9][0-9])	_RL_MINOR=$RL_MINOR ;;
+[0-9])	_RL_MINOR=0$RL_MINOR ;;
+*)		_RL_MINOR=00 ;;
+esac
+
+RL_VERSION="0x${_RL_MAJOR}${_RL_MINOR}"
+
+# Readline versions greater than 4.2 have these defines in readline.h
+
+if test $ac_cv_rl_version = '0.0' ; then
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Could not test version of installed readline library." >&5
+$as_echo "$as_me: WARNING: Could not test version of installed readline library." >&2;}
+elif test $RL_MAJOR -gt 4 || { test $RL_MAJOR = 4 && test $RL_MINOR -gt 2 ; } ; then
+	# set these for use by the caller
+	RL_PREFIX=$ac_cv_rl_prefix
+	RL_LIBDIR=$ac_cv_rl_libdir
+	RL_INCLUDEDIR=$ac_cv_rl_includedir
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_rl_version" >&5
+$as_echo "$ac_cv_rl_version" >&6; }
+else
+
+
+cat >>confdefs.h <<_ACEOF
+#define RL_READLINE_VERSION $RL_VERSION
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define RL_VERSION_MAJOR $RL_MAJOR
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define RL_VERSION_MINOR $RL_MINOR
+_ACEOF
+
+
+
+
+
+
+# set these for use by the caller
+RL_PREFIX=$ac_cv_rl_prefix
+RL_LIBDIR=$ac_cv_rl_libdir
+RL_INCLUDEDIR=$ac_cv_rl_includedir
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_rl_version" >&5
+$as_echo "$ac_cv_rl_version" >&6; }
+
+fi
+
+
+	case "$ac_cv_rl_version" in
+	8*|9*)	;;
+	*)	opt_with_installed_readline=no
+		{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: installed readline library is too old to be linked with bash" >&5
+$as_echo "$as_me: WARNING: installed readline library is too old to be linked with bash" >&2;}
+		{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using private bash version" >&5
+$as_echo "$as_me: WARNING: using private bash version" >&2;}
+		;;
+	esac
+fi
+
+TILDE_LIB=-ltilde
+if test $opt_readline = yes; then
+	$as_echo "#define READLINE 1" >>confdefs.h
+
+	if test "$opt_with_installed_readline" != "no" ; then
+		case "$opt_with_installed_readline" in
+		yes)	RL_INCLUDE= ;;
+		*)	case "$RL_INCLUDEDIR" in
+			/usr/include)	;;
+			*)		RL_INCLUDE='-I${RL_INCLUDEDIR}' ;;
+			esac
+			;;
+		esac
+		READLINE_DEP=
+		READLINE_LIB=-lreadline
+		# section for OS versions that don't allow unresolved symbols
+		# to be compiled into dynamic libraries.
+		case "$host_os" in
+		cygwin*)	TILDE_LIB= ;;
+		esac
+	else
+		RL_LIBDIR='$(dot)/$(LIBSUBDIR)/readline'
+		READLINE_DEP='$(READLINE_LIBRARY)'
+		# section for OS versions that ship an older/broken version of
+		# readline as a standard dynamic library and don't allow a
+		# static version specified as -llibname to override the
+		# dynamic version
+		case "${host_os}" in
+		darwin[89]*|darwin10*) READLINE_LIB='${READLINE_LIBRARY}' ;;
+		*)		READLINE_LIB=-lreadline ;;
+		esac
+	fi
+else
+	RL_LIBDIR='$(dot)/$(LIBSUBDIR)/readline'
+	READLINE_LIB= READLINE_DEP=
+fi
+if test $opt_history = yes || test $opt_bang_history = yes; then
+	if test $opt_history = yes; then
+		$as_echo "#define HISTORY 1" >>confdefs.h
+
+	fi
+	if test $opt_bang_history = yes; then
+		$as_echo "#define BANG_HISTORY 1" >>confdefs.h
+
+	fi
+ 	if test "$opt_with_installed_readline" != "no"; then
+		HIST_LIBDIR=$RL_LIBDIR
+		HISTORY_DEP=
+		HISTORY_LIB=-lhistory
+		case "$opt_with_installed_readline" in
+		yes)	RL_INCLUDE= ;;
+		*)	case "$RL_INCLUDEDIR" in
+			/usr/include)	;;
+			*)		RL_INCLUDE='-I${RL_INCLUDEDIR}' ;;
+			esac
+			;;
+		esac
+	else
+		HIST_LIBDIR='$(dot)/$(LIBSUBDIR)/readline'
+		HISTORY_DEP='$(HISTORY_LIBRARY)'
+		# section for OS versions that ship an older version of
+		# readline as a standard dynamic library and don't allow a
+		# static version specified as -llibname to override the
+		# dynamic version
+		case "${host_os}" in
+		darwin[89]*|darwin10*) HISTORY_LIB='${HISTORY_LIBRARY}' ;;
+		*)		HISTORY_LIB=-lhistory ;;
+		esac
+	fi
+else
+	HIST_LIBDIR='$(dot)/$(LIBSUBDIR)/readline'
+	HISTORY_LIB= HISTORY_DEP=
+fi
+
+
+
+
+
+
+
+
+
+
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+  ./ | .// | /[cC]/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+
+  done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AR="${ac_tool_prefix}ar"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AR"; then
+  ac_ct_AR=$AR
+  # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_AR="ar"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_AR" = x; then
+    AR=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+else
+  AR="$ac_cv_prog_AR"
+fi
+
+test -n "$ARFLAGS" || ARFLAGS="cr"
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+for ac_prog in 'bison -y' byacc
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_YACC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$YACC"; then
+  ac_cv_prog_YACC="$YACC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_YACC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+YACC=$ac_cv_prog_YACC
+if test -n "$YACC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $YACC" >&5
+$as_echo "$YACC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$YACC" && break
+done
+test -n "$YACC" || YACC="yacc"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+  SET_MAKE=
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+
+case "$ac_cv_prog_YACC" in
+*bison*)	;;
+*)	{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: bison not available; needed to process parse.y" >&5
+$as_echo "$as_me: WARNING: bison not available; needed to process parse.y" >&2;} ;;
+esac
+
+case "$host_os" in
+opennt*|interix*)	MAKE_SHELL="$INTERIX_ROOT/bin/sh" ;;
+*)			MAKE_SHELL=/bin/sh ;;
+esac
+
+
+if test x$SIZE = x; then
+	if test x$ac_tool_prefix = x; then
+		SIZE=size
+	else
+		SIZE=${ac_tool_prefix}size
+		save_IFS=$IFS ; IFS=:
+		size_found=0
+		for dir in $PATH; do
+			if test -x $dir/$SIZE ; then
+				size_found=1
+				break
+			fi
+		done
+		if test $size_found -eq 0; then
+			SIZE=:
+		fi
+		IFS=$save_IFS
+	fi
+fi
+
+
+# Checks for stat-related time functions.
+
+# Copyright (C) 1998-1999, 2001, 2003, 2005-2007, 2009-2012 Free Software
+# Foundation, Inc.
+
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+
+# st_atim.tv_nsec - Linux, Solaris, Cygwin
+# st_atimespec.tv_nsec - FreeBSD, NetBSD, if ! defined _POSIX_SOURCE
+# st_atimensec - FreeBSD, NetBSD, if defined _POSIX_SOURCE
+# st_atim.st__tim.tv_nsec - UnixWare (at least 2.1.2 through 7.1)
+
+# st_birthtimespec - FreeBSD, NetBSD (hidden on OpenBSD 3.9, anyway)
+# st_birthtim - Cygwin 1.7.0+
+
+
+
+# Configure checks for struct timespec
+
+# Copyright (C) 2000-2001, 2003-2007, 2009-2011, 2012 Free Software Foundation, Inc.
+
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# Original written by Paul Eggert and Jim Meyering.
+# Modified by Chet Ramey for bash
+
+
+
+
+
+
+# codeset.m4 serial 5 (gettext-0.18.2)
+
+
+
+
+
+
+
+
+# fcntl-o.m4 serial 6
+
+
+
+
+# Test whether the flags O_NOATIME and O_NOFOLLOW actually work.
+# Define HAVE_WORKING_O_NOATIME to 1 if O_NOATIME works, or to 0 otherwise.
+# Define HAVE_WORKING_O_NOFOLLOW to 1 if O_NOFOLLOW works, or to 0 otherwise.
+
+
+# gettext.m4 serial 69 (gettext-0.19.9)
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# glibc2.m4 serial 3
+
+# Test for the GNU C Library, version 2.0 or newer.
+# From Bruno Haible.
+
+
+
+# glibc21.m4 serial 5
+
+# Test for the GNU C Library, version 2.1 or newer, or uClibc.
+# From Bruno Haible.
+
+
+
+# host-cpu-c-abi.m4 serial 11
+
+
+
+
+
+
+
+# iconv.m4 serial 21
+
+
+
+
+
+
+
+
+
+# intdiv0.m4 serial 6 (gettext-0.18.2)
+
+
+
+
+# intl.m4 serial 34 (gettext-0.19.9)
+
+
+
+
+
+
+
+
+
+
+
+# intlmacosx.m4 serial 6 (gettext-0.19.9)
+
+
+
+# intl-thread-locale.m4 serial 4
+
+
+
+
+
+# intmax.m4 serial 6 (gettext-0.18.2)
+
+
+
+
+# inttypes-pri.m4 serial 7 (gettext-0.18.2)
+
+
+
+
+# Define PRI_MACROS_BROKEN if <inttypes.h> exists and defines the PRI*
+# macros to non-string values.  This is the case on AIX 4.3.3.
+
+
+
+# inttypes.m4 serial 27
+
+
+
+
+
+
+# Ensure that the PRI* and SCN* macros are defined appropriately.
+
+
+# Define the symbol $1 to be 1 if the condition is true, 0 otherwise.
+# If $2 is true, the condition is $3; otherwise if long long int is supported
+# approximate the condition with $4; otherwise, assume the condition is false.
+# The condition should work on all C99 platforms; the approximations should be
+# good enough to work on all practical pre-C99 platforms.
+# $2 is evaluated by the C preprocessor, $3 and $4 as compile-time constants.
+
+
+
+
+
+
+# inttypes_h.m4 serial 10
+
+
+# Define HAVE_INTTYPES_H_WITH_UINTMAX if <inttypes.h> exists,
+# doesn't clash with <sys/types.h>, and declares uintmax_t.
+
+
+
+# lcmessage.m4 serial 7 (gettext-0.18.2)
+
+
+# Check whether LC_MESSAGES is available in <locale.h>.
+
+
+
+# lib-ld.m4 serial 9
+
+
+
+
+
+
+# lib-link.m4 serial 28
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# lib-prefix.m4 serial 14
+
+
+
+
+
+
+
+
+
+
+# lock.m4 serial 14
+
+
+
+
+# Prerequisites of lib/glthread/lock.c.
+
+
+# nls.m4 serial 5 (gettext-0.18)
+
+
+
+
+
+
+# po.m4 serial 24a
+
+
+
+
+
+
+
+
+
+
+
+
+# printf-posix.m4 serial 6 (gettext-0.18.2)
+
+
+
+
+# progtest.m4 serial 7 (gettext-0.18.2)
+
+
+
+
+# Search path for a program which passes the given test.
+
+
+
+# pthread_rwlock_rdlock.m4 serial 2
+
+
+
+
+# size_max.m4 serial 11
+
+
+
+
+
+
+# stdint_h.m4 serial 9
+
+
+# Define HAVE_STDINT_H_WITH_UINTMAX if <stdint.h> exists,
+# doesn't clash with <sys/types.h>, and declares uintmax_t.
+
+
+
+# threadlib.m4 serial 16
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# uintmax_t.m4 serial 12
+
+
+
+
+# Define uintmax_t to 'unsigned long' or 'unsigned long long'
+# if it is not already defined in <stdint.h> or <inttypes.h>.
+
+
+
+# ulonglong.m4 serial 10
+
+# visibility.m4 serial 6
+
+
+
+
+
+# wchar_t.m4 serial 4 (gettext-0.18.2)
+
+
+
+
+# wint_t.m4 serial 7
+
+
+
+
+
+
+# xsize.m4 serial 5
+
+
+
+
+$as_echo "#define _GNU_SOURCE 1" >>confdefs.h
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5
+$as_echo_n "checking for an ANSI C-conforming const... " >&6; }
+if ${ac_cv_c_const+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+#ifndef __cplusplus
+  /* Ultrix mips cc rejects this sort of thing.  */
+  typedef int charset[2];
+  const charset cs = { 0, 0 };
+  /* SunOS 4.1.1 cc rejects this.  */
+  char const *const *pcpcc;
+  char **ppc;
+  /* NEC SVR4.0.2 mips cc rejects this.  */
+  struct point {int x, y;};
+  static struct point const zero = {0,0};
+  /* AIX XL C 1.02.0.0 rejects this.
+     It does not let you subtract one const X* pointer from another in
+     an arm of an if-expression whose if-part is not a constant
+     expression */
+  const char *g = "string";
+  pcpcc = &g + (g ? g-g : 0);
+  /* HPUX 7.0 cc rejects these. */
+  ++pcpcc;
+  ppc = (char**) pcpcc;
+  pcpcc = (char const *const *) ppc;
+  { /* SCO 3.2v4 cc rejects this sort of thing.  */
+    char tx;
+    char *t = &tx;
+    char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+    *t++ = 0;
+    if (s) return 0;
+  }
+  { /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
+    int x[] = {25, 17};
+    const int *foo = &x[0];
+    ++foo;
+  }
+  { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+    typedef const int *iptr;
+    iptr p = 0;
+    ++p;
+  }
+  { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying
+       "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+    struct s { int j; const int *ap[3]; } bx;
+    struct s *b = &bx; b->j = 5;
+  }
+  { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+    const int foo = 10;
+    if (!foo) return 0;
+  }
+  return !cs[0] && !zero.x;
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_c_const=yes
+else
+  ac_cv_c_const=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5
+$as_echo "$ac_cv_c_const" >&6; }
+if test $ac_cv_c_const = no; then
+
+$as_echo "#define const /**/" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5
+$as_echo_n "checking for inline... " >&6; }
+if ${ac_cv_c_inline+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_c_inline=no
+for ac_kw in inline __inline__ __inline; do
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifndef __cplusplus
+typedef int foo_t;
+static $ac_kw foo_t static_foo () {return 0; }
+$ac_kw foo_t foo () {return 0; }
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_c_inline=$ac_kw
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  test "$ac_cv_c_inline" != no && break
+done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5
+$as_echo "$ac_cv_c_inline" >&6; }
+
+case $ac_cv_c_inline in
+  inline | yes) ;;
+  *)
+    case $ac_cv_c_inline in
+      no) ac_val=;;
+      *) ac_val=$ac_cv_c_inline;;
+    esac
+    cat >>confdefs.h <<_ACEOF
+#ifndef __cplusplus
+#define inline $ac_val
+#endif
+_ACEOF
+    ;;
+esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5
+$as_echo_n "checking whether byte ordering is bigendian... " >&6; }
+if ${ac_cv_c_bigendian+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_c_bigendian=unknown
+    # See if we're dealing with a universal compiler.
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifndef __APPLE_CC__
+	       not a universal capable compiler
+	     #endif
+	     typedef int dummy;
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+	# Check for potential -arch flags.  It is not universal unless
+	# there are at least two -arch flags with different values.
+	ac_arch=
+	ac_prev=
+	for ac_word in $CC $CFLAGS $CPPFLAGS $LDFLAGS; do
+	 if test -n "$ac_prev"; then
+	   case $ac_word in
+	     i?86 | x86_64 | ppc | ppc64)
+	       if test -z "$ac_arch" || test "$ac_arch" = "$ac_word"; then
+		 ac_arch=$ac_word
+	       else
+		 ac_cv_c_bigendian=universal
+		 break
+	       fi
+	       ;;
+	   esac
+	   ac_prev=
+	 elif test "x$ac_word" = "x-arch"; then
+	   ac_prev=arch
+	 fi
+       done
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    if test $ac_cv_c_bigendian = unknown; then
+      # See if sys/param.h defines the BYTE_ORDER macro.
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+	     #include <sys/param.h>
+
+int
+main ()
+{
+#if ! (defined BYTE_ORDER && defined BIG_ENDIAN \
+		     && defined LITTLE_ENDIAN && BYTE_ORDER && BIG_ENDIAN \
+		     && LITTLE_ENDIAN)
+	      bogus endian macros
+	     #endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  # It does; now see whether it defined to BIG_ENDIAN or not.
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+		#include <sys/param.h>
+
+int
+main ()
+{
+#if BYTE_ORDER != BIG_ENDIAN
+		 not big endian
+		#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_c_bigendian=yes
+else
+  ac_cv_c_bigendian=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    fi
+    if test $ac_cv_c_bigendian = unknown; then
+      # See if <limits.h> defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris).
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <limits.h>
+
+int
+main ()
+{
+#if ! (defined _LITTLE_ENDIAN || defined _BIG_ENDIAN)
+	      bogus endian macros
+	     #endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  # It does; now see whether it defined to _BIG_ENDIAN or not.
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <limits.h>
+
+int
+main ()
+{
+#ifndef _BIG_ENDIAN
+		 not big endian
+		#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_c_bigendian=yes
+else
+  ac_cv_c_bigendian=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    fi
+    if test $ac_cv_c_bigendian = unknown; then
+      # Compile a test program.
+      if test "$cross_compiling" = yes; then :
+  # Try to guess by grepping values from an object file.
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+short int ascii_mm[] =
+		  { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
+		short int ascii_ii[] =
+		  { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
+		int use_ascii (int i) {
+		  return ascii_mm[i] + ascii_ii[i];
+		}
+		short int ebcdic_ii[] =
+		  { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
+		short int ebcdic_mm[] =
+		  { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
+		int use_ebcdic (int i) {
+		  return ebcdic_mm[i] + ebcdic_ii[i];
+		}
+		extern int foo;
+
+int
+main ()
+{
+return use_ascii (foo) == use_ebcdic (foo);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  if grep BIGenDianSyS conftest.$ac_objext >/dev/null; then
+	      ac_cv_c_bigendian=yes
+	    fi
+	    if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then
+	      if test "$ac_cv_c_bigendian" = unknown; then
+		ac_cv_c_bigendian=no
+	      else
+		# finding both strings is unlikely to happen, but who knows?
+		ac_cv_c_bigendian=unknown
+	      fi
+	    fi
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+
+	     /* Are we little or big endian?  From Harbison&Steele.  */
+	     union
+	     {
+	       long int l;
+	       char c[sizeof (long int)];
+	     } u;
+	     u.l = 1;
+	     return u.c[sizeof (long int) - 1] == 1;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_c_bigendian=no
+else
+  ac_cv_c_bigendian=yes
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+    fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_bigendian" >&5
+$as_echo "$ac_cv_c_bigendian" >&6; }
+ case $ac_cv_c_bigendian in #(
+   yes)
+     $as_echo "#define WORDS_BIGENDIAN 1" >>confdefs.h
+;; #(
+   no)
+      ;; #(
+   universal)
+
+$as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
+
+     ;; #(
+   *)
+     as_fn_error $? "unknown endianness
+ presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;;
+ esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for preprocessor stringizing operator" >&5
+$as_echo_n "checking for preprocessor stringizing operator... " >&6; }
+if ${ac_cv_c_stringize+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#define x(y) #y
+
+char *s = x(teststring);
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "#teststring" >/dev/null 2>&1; then :
+  ac_cv_c_stringize=no
+else
+  ac_cv_c_stringize=yes
+fi
+rm -f conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_stringize" >&5
+$as_echo "$ac_cv_c_stringize" >&6; }
+if test $ac_cv_c_stringize = yes; then
+
+$as_echo "#define HAVE_STRINGIZE 1" >>confdefs.h
+
+fi
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for long double with more range or precision than double" >&5
+$as_echo_n "checking for long double with more range or precision than double... " >&6; }
+if ${ac_cv_type_long_double_wider+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <float.h>
+	    long double const a[] =
+	      {
+		 0.0L, DBL_MIN, DBL_MAX, DBL_EPSILON,
+		 LDBL_MIN, LDBL_MAX, LDBL_EPSILON
+	      };
+	    long double
+	    f (long double x)
+	    {
+	       return ((x + (unsigned long int) 10) * (-1 / x) + a[0]
+			+ (x ? f (x) : 'c'));
+	    }
+
+int
+main ()
+{
+static int test_array [1 - 2 * !((0 < ((DBL_MAX_EXP < LDBL_MAX_EXP)
+		   + (DBL_MANT_DIG < LDBL_MANT_DIG)
+		   - (LDBL_MAX_EXP < DBL_MAX_EXP)
+		   - (LDBL_MANT_DIG < DBL_MANT_DIG)))
+	    && (int) LDBL_EPSILON == 0
+	  )];
+test_array [0] = 0;
+return test_array [0];
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_type_long_double_wider=yes
+else
+  ac_cv_type_long_double_wider=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_long_double_wider" >&5
+$as_echo "$ac_cv_type_long_double_wider" >&6; }
+  if test $ac_cv_type_long_double_wider = yes; then
+
+$as_echo "#define HAVE_LONG_DOUBLE_WIDER 1" >>confdefs.h
+
+  fi
+
+    ac_cv_c_long_double=$ac_cv_type_long_double_wider
+    if test $ac_cv_c_long_double = yes; then
+
+$as_echo "#define HAVE_LONG_DOUBLE 1" >>confdefs.h
+
+    fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for function prototypes" >&5
+$as_echo_n "checking for function prototypes... " >&6; }
+if test "$ac_cv_prog_cc_c89" != no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+$as_echo "#define PROTOTYPES 1" >>confdefs.h
+
+
+$as_echo "#define __PROTOTYPES 1" >>confdefs.h
+
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether char is unsigned" >&5
+$as_echo_n "checking whether char is unsigned... " >&6; }
+if ${ac_cv_c_char_unsigned+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((char) -1) < 0)];
+test_array [0] = 0;
+return test_array [0];
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_c_char_unsigned=no
+else
+  ac_cv_c_char_unsigned=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_char_unsigned" >&5
+$as_echo "$ac_cv_c_char_unsigned" >&6; }
+if test $ac_cv_c_char_unsigned = yes && test "$GCC" != yes; then
+  $as_echo "#define __CHAR_UNSIGNED__ 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working volatile" >&5
+$as_echo_n "checking for working volatile... " >&6; }
+if ${ac_cv_c_volatile+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+volatile int x;
+int * volatile y = (int *) 0;
+return !x && !y;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_c_volatile=yes
+else
+  ac_cv_c_volatile=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_volatile" >&5
+$as_echo "$ac_cv_c_volatile" >&6; }
+if test $ac_cv_c_volatile = no; then
+
+$as_echo "#define volatile /**/" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C/C++ restrict keyword" >&5
+$as_echo_n "checking for C/C++ restrict keyword... " >&6; }
+if ${ac_cv_c_restrict+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_c_restrict=no
+   # The order here caters to the fact that C++ does not require restrict.
+   for ac_kw in __restrict __restrict__ _Restrict restrict; do
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+typedef int * int_ptr;
+	int foo (int_ptr $ac_kw ip) {
+	return ip[0];
+       }
+int
+main ()
+{
+int s[1];
+	int * $ac_kw t = s;
+	t[0] = 0;
+	return foo(t)
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_c_restrict=$ac_kw
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+     test "$ac_cv_c_restrict" != no && break
+   done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_restrict" >&5
+$as_echo "$ac_cv_c_restrict" >&6; }
+
+ case $ac_cv_c_restrict in
+   restrict) ;;
+   no) $as_echo "#define restrict /**/" >>confdefs.h
+ ;;
+   *)  cat >>confdefs.h <<_ACEOF
+#define restrict $ac_cv_c_restrict
+_ACEOF
+ ;;
+ esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if ${ac_cv_path_mkdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+  done
+IFS=$as_save_IFS
+
+fi
+
+  test -d ./--version && rmdir ./--version
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    MKDIR_P="$ac_install_sh -d"
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+     for ac_i in 1 2 3 4 5 6 7; do
+       ac_script="$ac_script$as_nl$ac_script"
+     done
+     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+     { ac_script=; unset ac_script;}
+     if test -z "$SED"; then
+  ac_path_SED_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_SED" || continue
+# Check for GNU ac_path_SED and select it if it is found.
+  # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo '' >> "conftest.nl"
+    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_SED_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_SED="$ac_path_SED"
+      ac_path_SED_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_SED_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_SED"; then
+    as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+  fi
+else
+  ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+  rm -f conftest.sed
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5
+$as_echo_n "checking whether NLS is requested... " >&6; }
+    # Check whether --enable-nls was given.
+if test "${enable_nls+set}" = set; then :
+  enableval=$enable_nls; USE_NLS=$enableval
+else
+  USE_NLS=yes
+fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5
+$as_echo "$USE_NLS" >&6; }
+
+
+
+
+      GETTEXT_MACRO_VERSION=0.19
+
+
+
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
+  # contains only /bin. Note that ksh looks also at the FPATH variable,
+  # so we have to set that as well for the test.
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+    && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+           || PATH_SEPARATOR=';'
+       }
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+  ac_executable_p="test -x"
+else
+  ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "msgfmt", so it can be a program name with args.
+set dummy msgfmt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_MSGFMT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case "$MSGFMT" in
+  [\\/]* | ?:[\\/]*)
+    ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+    ;;
+  *)
+    ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH; do
+      IFS="$ac_save_IFS"
+      test -z "$ac_dir" && ac_dir=.
+      for ac_exec_ext in '' $ac_executable_extensions; do
+        if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+          echo "$as_me: trying $ac_dir/$ac_word..." >&5
+          if $ac_dir/$ac_word --statistics /dev/null >&5 2>&1 &&
+     (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+            ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext"
+            break 2
+          fi
+        fi
+      done
+    done
+    IFS="$ac_save_IFS"
+  test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":"
+    ;;
+esac
+fi
+MSGFMT="$ac_cv_path_MSGFMT"
+if test "$MSGFMT" != ":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5
+$as_echo "$MSGFMT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  # Extract the first word of "gmsgfmt", so it can be a program name with args.
+set dummy gmsgfmt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_GMSGFMT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $GMSGFMT in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+  ;;
+esac
+fi
+GMSGFMT=$ac_cv_path_GMSGFMT
+if test -n "$GMSGFMT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5
+$as_echo "$GMSGFMT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+    case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+    '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;;
+    *) MSGFMT_015=$MSGFMT ;;
+  esac
+
+  case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+    '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
+    *) GMSGFMT_015=$GMSGFMT ;;
+  esac
+
+
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
+  # contains only /bin. Note that ksh looks also at the FPATH variable,
+  # so we have to set that as well for the test.
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+    && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+           || PATH_SEPARATOR=';'
+       }
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+  ac_executable_p="test -x"
+else
+  ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "xgettext", so it can be a program name with args.
+set dummy xgettext; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_XGETTEXT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case "$XGETTEXT" in
+  [\\/]* | ?:[\\/]*)
+    ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+    ;;
+  *)
+    ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH; do
+      IFS="$ac_save_IFS"
+      test -z "$ac_dir" && ac_dir=.
+      for ac_exec_ext in '' $ac_executable_extensions; do
+        if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+          echo "$as_me: trying $ac_dir/$ac_word..." >&5
+          if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 &&
+     (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+            ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext"
+            break 2
+          fi
+        fi
+      done
+    done
+    IFS="$ac_save_IFS"
+  test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+    ;;
+esac
+fi
+XGETTEXT="$ac_cv_path_XGETTEXT"
+if test "$XGETTEXT" != ":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5
+$as_echo "$XGETTEXT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+    rm -f messages.po
+
+    case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+    '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
+    *) XGETTEXT_015=$XGETTEXT ;;
+  esac
+
+
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
+  # contains only /bin. Note that ksh looks also at the FPATH variable,
+  # so we have to set that as well for the test.
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+    && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+           || PATH_SEPARATOR=';'
+       }
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+  ac_executable_p="test -x"
+else
+  ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "msgmerge", so it can be a program name with args.
+set dummy msgmerge; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_MSGMERGE+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case "$MSGMERGE" in
+  [\\/]* | ?:[\\/]*)
+    ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path.
+    ;;
+  *)
+    ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH; do
+      IFS="$ac_save_IFS"
+      test -z "$ac_dir" && ac_dir=.
+      for ac_exec_ext in '' $ac_executable_extensions; do
+        if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+          echo "$as_me: trying $ac_dir/$ac_word..." >&5
+          if $ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1; then
+            ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext"
+            break 2
+          fi
+        fi
+      done
+    done
+    IFS="$ac_save_IFS"
+  test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":"
+    ;;
+esac
+fi
+MSGMERGE="$ac_cv_path_MSGMERGE"
+if test "$MSGMERGE" != ":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5
+$as_echo "$MSGMERGE" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS=
+
+
+  ac_config_commands="$ac_config_commands po-directories"
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C Library 2 or newer" >&5
+$as_echo_n "checking whether we are using the GNU C Library 2 or newer... " >&6; }
+if ${ac_cv_gnu_library_2+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <features.h>
+#ifdef __GNU_LIBRARY__
+ #if (__GLIBC__ >= 2) && !defined __UCLIBC__
+  Lucky GNU user
+ #endif
+#endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "Lucky GNU user" >/dev/null 2>&1; then :
+  ac_cv_gnu_library_2=yes
+else
+  ac_cv_gnu_library_2=no
+fi
+rm -f conftest*
+
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_gnu_library_2" >&5
+$as_echo "$ac_cv_gnu_library_2" >&6; }
+
+    GLIBC2="$ac_cv_gnu_library_2"
+
+
+
+
+  CFLAG_VISIBILITY=
+  HAVE_VISIBILITY=0
+  if test -n "$GCC"; then
+                { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the -Werror option is usable" >&5
+$as_echo_n "checking whether the -Werror option is usable... " >&6; }
+if ${gl_cv_cc_vis_werror+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  gl_save_CFLAGS="$CFLAGS"
+       CFLAGS="$CFLAGS -Werror"
+       cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gl_cv_cc_vis_werror=yes
+else
+  gl_cv_cc_vis_werror=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+       CFLAGS="$gl_save_CFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_cc_vis_werror" >&5
+$as_echo "$gl_cv_cc_vis_werror" >&6; }
+        { $as_echo "$as_me:${as_lineno-$LINENO}: checking for simple visibility declarations" >&5
+$as_echo_n "checking for simple visibility declarations... " >&6; }
+if ${gl_cv_cc_visibility+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  gl_save_CFLAGS="$CFLAGS"
+       CFLAGS="$CFLAGS -fvisibility=hidden"
+                                          if test $gl_cv_cc_vis_werror = yes; then
+         CFLAGS="$CFLAGS -Werror"
+       fi
+       cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+extern __attribute__((__visibility__("hidden"))) int hiddenvar;
+              extern __attribute__((__visibility__("default"))) int exportedvar;
+              extern __attribute__((__visibility__("hidden"))) int hiddenfunc (void);
+              extern __attribute__((__visibility__("default"))) int exportedfunc (void);
+              void dummyfunc (void) {}
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gl_cv_cc_visibility=yes
+else
+  gl_cv_cc_visibility=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+       CFLAGS="$gl_save_CFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_cc_visibility" >&5
+$as_echo "$gl_cv_cc_visibility" >&6; }
+    if test $gl_cv_cc_visibility = yes; then
+      CFLAG_VISIBILITY="-fvisibility=hidden"
+      HAVE_VISIBILITY=1
+    fi
+  fi
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_VISIBILITY $HAVE_VISIBILITY
+_ACEOF
+
+
+ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default"
+if test "x$ac_cv_type_size_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define size_t unsigned int
+_ACEOF
+
+fi
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for stdint.h" >&5
+$as_echo_n "checking for stdint.h... " >&6; }
+if ${gl_cv_header_stdint_h+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+            #include <stdint.h>
+int
+main ()
+{
+uintmax_t i = (uintmax_t) -1; return !i;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gl_cv_header_stdint_h=yes
+else
+  gl_cv_header_stdint_h=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_header_stdint_h" >&5
+$as_echo "$gl_cv_header_stdint_h" >&6; }
+  if test $gl_cv_header_stdint_h = yes; then
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STDINT_H_WITH_UINTMAX 1
+_ACEOF
+
+  fi
+
+# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
+# for constant arguments.  Useless!
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working alloca.h" >&5
+$as_echo_n "checking for working alloca.h... " >&6; }
+if ${ac_cv_working_alloca_h+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <alloca.h>
+int
+main ()
+{
+char *p = (char *) alloca (2 * sizeof (int));
+			  if (p) return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_working_alloca_h=yes
+else
+  ac_cv_working_alloca_h=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_working_alloca_h" >&5
+$as_echo "$ac_cv_working_alloca_h" >&6; }
+if test $ac_cv_working_alloca_h = yes; then
+
+$as_echo "#define HAVE_ALLOCA_H 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for alloca" >&5
+$as_echo_n "checking for alloca... " >&6; }
+if ${ac_cv_func_alloca_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __GNUC__
+# define alloca __builtin_alloca
+#else
+# ifdef _MSC_VER
+#  include <malloc.h>
+#  define alloca _alloca
+# else
+#  ifdef HAVE_ALLOCA_H
+#   include <alloca.h>
+#  else
+#   ifdef _AIX
+ #pragma alloca
+#   else
+#    ifndef alloca /* predefined by HP cc +Olibcalls */
+void *alloca (size_t);
+#    endif
+#   endif
+#  endif
+# endif
+#endif
+
+int
+main ()
+{
+char *p = (char *) alloca (1);
+				    if (p) return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_func_alloca_works=yes
+else
+  ac_cv_func_alloca_works=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_alloca_works" >&5
+$as_echo "$ac_cv_func_alloca_works" >&6; }
+
+if test $ac_cv_func_alloca_works = yes; then
+
+$as_echo "#define HAVE_ALLOCA 1" >>confdefs.h
+
+else
+  # The SVR3 libPW and SVR4 libucb both contain incompatible functions
+# that cause trouble.  Some versions do not even contain alloca or
+# contain a buggy version.  If you still want to use their alloca,
+# use ar to extract alloca.o from them instead of compiling alloca.c.
+
+ALLOCA=\${LIBOBJDIR}alloca.$ac_objext
+
+$as_echo "#define C_ALLOCA 1" >>confdefs.h
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether \`alloca.c' needs Cray hooks" >&5
+$as_echo_n "checking whether \`alloca.c' needs Cray hooks... " >&6; }
+if ${ac_cv_os_cray+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if defined CRAY && ! defined CRAY2
+webecray
+#else
+wenotbecray
+#endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "webecray" >/dev/null 2>&1; then :
+  ac_cv_os_cray=yes
+else
+  ac_cv_os_cray=no
+fi
+rm -f conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_os_cray" >&5
+$as_echo "$ac_cv_os_cray" >&6; }
+if test $ac_cv_os_cray = yes; then
+  for ac_func in _getb67 GETB67 getb67; do
+    as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+
+cat >>confdefs.h <<_ACEOF
+#define CRAY_STACKSEG_END $ac_func
+_ACEOF
+
+    break
+fi
+
+  done
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking stack direction for C alloca" >&5
+$as_echo_n "checking stack direction for C alloca... " >&6; }
+if ${ac_cv_c_stack_direction+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ac_cv_c_stack_direction=0
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_includes_default
+int
+find_stack_direction (int *addr, int depth)
+{
+  int dir, dummy = 0;
+  if (! addr)
+    addr = &dummy;
+  *addr = addr < &dummy ? 1 : addr == &dummy ? 0 : -1;
+  dir = depth ? find_stack_direction (addr, depth - 1) : 0;
+  return dir + dummy;
+}
+
+int
+main (int argc, char **argv)
+{
+  return find_stack_direction (0, argc + !argv + 20) < 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_c_stack_direction=1
+else
+  ac_cv_c_stack_direction=-1
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_stack_direction" >&5
+$as_echo "$ac_cv_c_stack_direction" >&6; }
+cat >>confdefs.h <<_ACEOF
+#define STACK_DIRECTION $ac_cv_c_stack_direction
+_ACEOF
+
+
+fi
+
+
+
+
+  for ac_header in $ac_header_list
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+
+
+
+for ac_func in getpagesize
+do :
+  ac_fn_c_check_func "$LINENO" "getpagesize" "ac_cv_func_getpagesize"
+if test "x$ac_cv_func_getpagesize" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_GETPAGESIZE 1
+_ACEOF
+
+fi
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working mmap" >&5
+$as_echo_n "checking for working mmap... " >&6; }
+if ${ac_cv_func_mmap_fixed_mapped+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ac_cv_func_mmap_fixed_mapped=no
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_includes_default
+/* malloc might have been renamed as rpl_malloc. */
+#undef malloc
+
+/* Thanks to Mike Haertel and Jim Avera for this test.
+   Here is a matrix of mmap possibilities:
+	mmap private not fixed
+	mmap private fixed at somewhere currently unmapped
+	mmap private fixed at somewhere already mapped
+	mmap shared not fixed
+	mmap shared fixed at somewhere currently unmapped
+	mmap shared fixed at somewhere already mapped
+   For private mappings, we should verify that changes cannot be read()
+   back from the file, nor mmap's back from the file at a different
+   address.  (There have been systems where private was not correctly
+   implemented like the infamous i386 svr4.0, and systems where the
+   VM page cache was not coherent with the file system buffer cache
+   like early versions of FreeBSD and possibly contemporary NetBSD.)
+   For shared mappings, we should conversely verify that changes get
+   propagated back to all the places they're supposed to be.
+
+   Grep wants private fixed already mapped.
+   The main things grep needs to know about mmap are:
+   * does it exist and is it safe to write into the mmap'd area
+   * how to use it (BSD variants)  */
+
+#include <fcntl.h>
+#include <sys/mman.h>
+
+#if !defined STDC_HEADERS && !defined HAVE_STDLIB_H
+char *malloc ();
+#endif
+
+/* This mess was copied from the GNU getpagesize.h.  */
+#ifndef HAVE_GETPAGESIZE
+# ifdef _SC_PAGESIZE
+#  define getpagesize() sysconf(_SC_PAGESIZE)
+# else /* no _SC_PAGESIZE */
+#  ifdef HAVE_SYS_PARAM_H
+#   include <sys/param.h>
+#   ifdef EXEC_PAGESIZE
+#    define getpagesize() EXEC_PAGESIZE
+#   else /* no EXEC_PAGESIZE */
+#    ifdef NBPG
+#     define getpagesize() NBPG * CLSIZE
+#     ifndef CLSIZE
+#      define CLSIZE 1
+#     endif /* no CLSIZE */
+#    else /* no NBPG */
+#     ifdef NBPC
+#      define getpagesize() NBPC
+#     else /* no NBPC */
+#      ifdef PAGESIZE
+#       define getpagesize() PAGESIZE
+#      endif /* PAGESIZE */
+#     endif /* no NBPC */
+#    endif /* no NBPG */
+#   endif /* no EXEC_PAGESIZE */
+#  else /* no HAVE_SYS_PARAM_H */
+#   define getpagesize() 8192	/* punt totally */
+#  endif /* no HAVE_SYS_PARAM_H */
+# endif /* no _SC_PAGESIZE */
+
+#endif /* no HAVE_GETPAGESIZE */
+
+int
+main ()
+{
+  char *data, *data2, *data3;
+  const char *cdata2;
+  int i, pagesize;
+  int fd, fd2;
+
+  pagesize = getpagesize ();
+
+  /* First, make a file with some known garbage in it. */
+  data = (char *) malloc (pagesize);
+  if (!data)
+    return 1;
+  for (i = 0; i < pagesize; ++i)
+    *(data + i) = rand ();
+  umask (0);
+  fd = creat ("conftest.mmap", 0600);
+  if (fd < 0)
+    return 2;
+  if (write (fd, data, pagesize) != pagesize)
+    return 3;
+  close (fd);
+
+  /* Next, check that the tail of a page is zero-filled.  File must have
+     non-zero length, otherwise we risk SIGBUS for entire page.  */
+  fd2 = open ("conftest.txt", O_RDWR | O_CREAT | O_TRUNC, 0600);
+  if (fd2 < 0)
+    return 4;
+  cdata2 = "";
+  if (write (fd2, cdata2, 1) != 1)
+    return 5;
+  data2 = (char *) mmap (0, pagesize, PROT_READ | PROT_WRITE, MAP_SHARED, fd2, 0L);
+  if (data2 == MAP_FAILED)
+    return 6;
+  for (i = 0; i < pagesize; ++i)
+    if (*(data2 + i))
+      return 7;
+  close (fd2);
+  if (munmap (data2, pagesize))
+    return 8;
+
+  /* Next, try to mmap the file at a fixed address which already has
+     something else allocated at it.  If we can, also make sure that
+     we see the same garbage.  */
+  fd = open ("conftest.mmap", O_RDWR);
+  if (fd < 0)
+    return 9;
+  if (data2 != mmap (data2, pagesize, PROT_READ | PROT_WRITE,
+		     MAP_PRIVATE | MAP_FIXED, fd, 0L))
+    return 10;
+  for (i = 0; i < pagesize; ++i)
+    if (*(data + i) != *(data2 + i))
+      return 11;
+
+  /* Finally, make sure that changes to the mapped area do not
+     percolate back to the file as seen by read().  (This is a bug on
+     some variants of i386 svr4.0.)  */
+  for (i = 0; i < pagesize; ++i)
+    *(data2 + i) = *(data2 + i) + 1;
+  data3 = (char *) malloc (pagesize);
+  if (!data3)
+    return 12;
+  if (read (fd, data3, pagesize) != pagesize)
+    return 13;
+  for (i = 0; i < pagesize; ++i)
+    if (*(data + i) != *(data3 + i))
+      return 14;
+  close (fd);
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_func_mmap_fixed_mapped=yes
+else
+  ac_cv_func_mmap_fixed_mapped=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_mmap_fixed_mapped" >&5
+$as_echo "$ac_cv_func_mmap_fixed_mapped" >&6; }
+if test $ac_cv_func_mmap_fixed_mapped = yes; then
+
+$as_echo "#define HAVE_MMAP 1" >>confdefs.h
+
+fi
+rm -f conftest.mmap conftest.txt
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether integer division by zero raises SIGFPE" >&5
+$as_echo_n "checking whether integer division by zero raises SIGFPE... " >&6; }
+if ${gt_cv_int_divbyzero_sigfpe+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+      gt_cv_int_divbyzero_sigfpe=
+      case "$host_os" in
+        macos* | darwin[6-9]* | darwin[1-9][0-9]*)
+          # On Mac OS X 10.2 or newer, just assume the same as when cross-
+          # compiling. If we were to perform the real test, 1 Crash Report
+          # dialog window would pop up.
+          case "$host_cpu" in
+            i[34567]86 | x86_64)
+              gt_cv_int_divbyzero_sigfpe="guessing yes" ;;
+          esac
+          ;;
+      esac
+      if test -z "$gt_cv_int_divbyzero_sigfpe"; then
+        if test "$cross_compiling" = yes; then :
+
+            # Guess based on the CPU.
+            case "$host_cpu" in
+              alpha* | i[34567]86 | x86_64 | m68k | s390*)
+                gt_cv_int_divbyzero_sigfpe="guessing yes";;
+              *)
+                gt_cv_int_divbyzero_sigfpe="guessing no";;
+            esac
+
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <stdlib.h>
+#include <signal.h>
+
+static void
+sigfpe_handler (int sig)
+{
+  /* Exit with code 0 if SIGFPE, with code 1 if any other signal.  */
+  exit (sig != SIGFPE);
+}
+
+int x = 1;
+int y = 0;
+int z;
+int xnan;
+
+int main ()
+{
+  signal (SIGFPE, sigfpe_handler);
+/* IRIX and AIX (when "xlc -qcheck" is used) yield signal SIGTRAP.  */
+#if (defined (__sgi) || defined (_AIX)) && defined (SIGTRAP)
+  signal (SIGTRAP, sigfpe_handler);
+#endif
+/* Linux/SPARC yields signal SIGILL.  */
+#if defined (__sparc__) && defined (__linux__)
+  signal (SIGILL, sigfpe_handler);
+#endif
+
+  z = x / y;
+  xnan = y / y;
+  exit (2);
+}
+
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  gt_cv_int_divbyzero_sigfpe=yes
+else
+  gt_cv_int_divbyzero_sigfpe=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+      fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_int_divbyzero_sigfpe" >&5
+$as_echo "$gt_cv_int_divbyzero_sigfpe" >&6; }
+  case "$gt_cv_int_divbyzero_sigfpe" in
+    *yes) value=1;;
+    *) value=0;;
+  esac
+
+cat >>confdefs.h <<_ACEOF
+#define INTDIV0_RAISES_SIGFPE $value
+_ACEOF
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for inttypes.h" >&5
+$as_echo_n "checking for inttypes.h... " >&6; }
+if ${gl_cv_header_inttypes_h+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <sys/types.h>
+#include <inttypes.h>
+
+int
+main ()
+{
+uintmax_t i = (uintmax_t) -1; return !i;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gl_cv_header_inttypes_h=yes
+else
+  gl_cv_header_inttypes_h=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_header_inttypes_h" >&5
+$as_echo "$gl_cv_header_inttypes_h" >&6; }
+  if test $gl_cv_header_inttypes_h = yes; then
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_INTTYPES_H_WITH_UINTMAX 1
+_ACEOF
+
+  fi
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for unsigned long long int" >&5
+$as_echo_n "checking for unsigned long long int... " >&6; }
+if ${ac_cv_type_unsigned_long_long_int+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_type_unsigned_long_long_int=yes
+     if test "x${ac_cv_prog_cc_c99-no}" = xno; then
+       cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+  /* For now, do not test the preprocessor; as of 2007 there are too many
+	 implementations with broken preprocessors.  Perhaps this can
+	 be revisited in 2012.  In the meantime, code should not expect
+	 #if to work with literals wider than 32 bits.  */
+      /* Test literals.  */
+      long long int ll = 9223372036854775807ll;
+      long long int nll = -9223372036854775807LL;
+      unsigned long long int ull = 18446744073709551615ULL;
+      /* Test constant expressions.   */
+      typedef int a[((-9223372036854775807LL < 0 && 0 < 9223372036854775807ll)
+		     ? 1 : -1)];
+      typedef int b[(18446744073709551615ULL <= (unsigned long long int) -1
+		     ? 1 : -1)];
+      int i = 63;
+int
+main ()
+{
+/* Test availability of runtime routines for shift and division.  */
+      long long int llmax = 9223372036854775807ll;
+      unsigned long long int ullmax = 18446744073709551615ull;
+      return ((ll << 63) | (ll >> 63) | (ll < i) | (ll > i)
+	      | (llmax / ll) | (llmax % ll)
+	      | (ull << 63) | (ull >> 63) | (ull << i) | (ull >> i)
+	      | (ullmax / ull) | (ullmax % ull));
+  ;
+  return 0;
+}
+
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+else
+  ac_cv_type_unsigned_long_long_int=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_unsigned_long_long_int" >&5
+$as_echo "$ac_cv_type_unsigned_long_long_int" >&6; }
+  if test $ac_cv_type_unsigned_long_long_int = yes; then
+
+$as_echo "#define HAVE_UNSIGNED_LONG_LONG_INT 1" >>confdefs.h
+
+  fi
+
+
+
+
+  if test $gl_cv_header_inttypes_h = no && test $gl_cv_header_stdint_h = no; then
+
+    test $ac_cv_type_unsigned_long_long_int = yes \
+      && ac_type='unsigned long long' \
+      || ac_type='unsigned long'
+
+cat >>confdefs.h <<_ACEOF
+#define uintmax_t $ac_type
+_ACEOF
+
+  else
+
+$as_echo "#define HAVE_UINTMAX_T 1" >>confdefs.h
+
+  fi
+
+
+  for ac_header in inttypes.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "inttypes.h" "ac_cv_header_inttypes_h" "$ac_includes_default"
+if test "x$ac_cv_header_inttypes_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_INTTYPES_H 1
+_ACEOF
+
+fi
+
+done
+
+  if test $ac_cv_header_inttypes_h = yes; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the inttypes.h PRIxNN macros are broken" >&5
+$as_echo_n "checking whether the inttypes.h PRIxNN macros are broken... " >&6; }
+if ${gt_cv_inttypes_pri_broken+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <inttypes.h>
+#ifdef PRId32
+char *p = PRId32;
+#endif
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gt_cv_inttypes_pri_broken=no
+else
+  gt_cv_inttypes_pri_broken=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_inttypes_pri_broken" >&5
+$as_echo "$gt_cv_inttypes_pri_broken" >&6; }
+  fi
+  if test "$gt_cv_inttypes_pri_broken" = yes; then
+
+cat >>confdefs.h <<_ACEOF
+#define PRI_MACROS_BROKEN 1
+_ACEOF
+
+    PRI_MACROS_BROKEN=1
+  else
+    PRI_MACROS_BROKEN=0
+  fi
+
+
+
+
+
+
+
+  # Check whether --enable-threads was given.
+if test "${enable_threads+set}" = set; then :
+  enableval=$enable_threads; gl_use_threads=$enableval
+else
+  if test -n "$gl_use_threads_default"; then
+       gl_use_threads="$gl_use_threads_default"
+     else
+       case "$host_os" in
+                                                               osf*) gl_use_threads=no ;;
+         cygwin*)
+               case `uname -r` in
+                 1.[0-5].*) gl_use_threads=no ;;
+                 *)         gl_use_threads=yes ;;
+               esac
+               ;;
+         *)    gl_use_threads=yes ;;
+       esac
+     fi
+
+fi
+
+  if test "$gl_use_threads" = yes || test "$gl_use_threads" = posix; then
+    # For using <pthread.h>:
+    case "$host_os" in
+      osf*)
+        # On OSF/1, the compiler needs the flag -D_REENTRANT so that it
+        # groks <pthread.h>. cc also understands the flag -pthread, but
+        # we don't use it because 1. gcc-2.95 doesn't understand -pthread,
+        # 2. putting a flag into CPPFLAGS that has an effect on the linker
+        # causes the AC_LINK_IFELSE test below to succeed unexpectedly,
+        # leading to wrong values of LIBTHREAD and LTLIBTHREAD.
+        CPPFLAGS="$CPPFLAGS -D_REENTRANT"
+        ;;
+    esac
+    # Some systems optimize for single-threaded programs by default, and
+    # need special flags to disable these optimizations. For example, the
+    # definition of 'errno' in <errno.h>.
+    case "$host_os" in
+      aix* | freebsd*) CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" ;;
+      solaris*) CPPFLAGS="$CPPFLAGS -D_REENTRANT" ;;
+    esac
+  fi
+
+
+
+
+
+      if test "X$prefix" = "XNONE"; then
+    acl_final_prefix="$ac_default_prefix"
+  else
+    acl_final_prefix="$prefix"
+  fi
+  if test "X$exec_prefix" = "XNONE"; then
+    acl_final_exec_prefix='${prefix}'
+  else
+    acl_final_exec_prefix="$exec_prefix"
+  fi
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+  prefix="$acl_save_prefix"
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
+  # contains only /bin. Note that ksh looks also at the FPATH variable,
+  # so we have to set that as well for the test.
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+    && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+           || PATH_SEPARATOR=';'
+       }
+fi
+
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld" >&5
+$as_echo_n "checking for ld... " >&6; }
+elif test "$GCC" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+elif test "$with_gnu_ld" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if test -n "$LD"; then
+  # Let the user override the test with a path.
+  :
+else
+  if ${acl_cv_path_LD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    acl_cv_path_LD= # Final result of this test
+    ac_prog=ld # Program to search in $PATH
+    if test "$GCC" = yes; then
+      # Check if gcc -print-prog-name=ld gives a path.
+      case $host in
+        *-*-mingw*)
+          # gcc leaves a trailing carriage return which upsets mingw
+          acl_output=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+        *)
+          acl_output=`($CC -print-prog-name=ld) 2>&5` ;;
+      esac
+      case $acl_output in
+        # Accept absolute paths.
+        [\\/]* | ?:[\\/]*)
+          re_direlt='/[^/][^/]*/\.\./'
+          # Canonicalize the pathname of ld
+          acl_output=`echo "$acl_output" | sed 's%\\\\%/%g'`
+          while echo "$acl_output" | grep "$re_direlt" > /dev/null 2>&1; do
+            acl_output=`echo $acl_output | sed "s%$re_direlt%/%"`
+          done
+          # Got the pathname. No search in PATH is needed.
+          acl_cv_path_LD="$acl_output"
+          ac_prog=
+          ;;
+        "")
+          # If it fails, then pretend we aren't using GCC.
+          ;;
+        *)
+          # If it is relative, then search for the first ld in PATH.
+          with_gnu_ld=unknown
+          ;;
+      esac
+    fi
+    if test -n "$ac_prog"; then
+      # Search for $ac_prog in $PATH.
+      acl_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+      for ac_dir in $PATH; do
+        IFS="$acl_save_ifs"
+        test -z "$ac_dir" && ac_dir=.
+        if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+          acl_cv_path_LD="$ac_dir/$ac_prog"
+          # Check to see if the program is GNU ld.  I'd rather use --version,
+          # but apparently some variants of GNU ld only accept -v.
+          # Break only if it was the GNU/non-GNU ld that we prefer.
+          case `"$acl_cv_path_LD" -v 2>&1 </dev/null` in
+            *GNU* | *'with BFD'*)
+              test "$with_gnu_ld" != no && break
+              ;;
+            *)
+              test "$with_gnu_ld" != yes && break
+              ;;
+          esac
+        fi
+      done
+      IFS="$acl_save_ifs"
+    fi
+    case $host in
+      *-*-aix*)
+        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if defined __powerpc64__ || defined _ARCH_PPC64
+                int ok;
+               #else
+                error fail
+               #endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  # The compiler produces 64-bit code. Add option '-b64' so that the
+           # linker groks 64-bit object files.
+           case "$acl_cv_path_LD " in
+             *" -b64 "*) ;;
+             *) acl_cv_path_LD="$acl_cv_path_LD -b64" ;;
+           esac
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+        ;;
+      sparc64-*-netbsd*)
+        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if defined __sparcv9 || defined __arch64__
+                int ok;
+               #else
+                error fail
+               #endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  # The compiler produces 32-bit code. Add option '-m elf32_sparc'
+           # so that the linker groks 32-bit object files.
+           case "$acl_cv_path_LD " in
+             *" -m elf32_sparc "*) ;;
+             *) acl_cv_path_LD="$acl_cv_path_LD -m elf32_sparc" ;;
+           esac
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+        ;;
+    esac
+
+fi
+
+  LD="$acl_cv_path_LD"
+fi
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+  as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${acl_cv_prog_gnu_ld+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  acl_cv_prog_gnu_ld=yes
+  ;;
+*)
+  acl_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5
+$as_echo "$acl_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$acl_cv_prog_gnu_ld
+
+
+
+
+                                                { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5
+$as_echo_n "checking for shared library run path origin... " >&6; }
+if ${acl_cv_rpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+    ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+    . ./conftest.sh
+    rm -f ./conftest.sh
+    acl_cv_rpath=done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5
+$as_echo "$acl_cv_rpath" >&6; }
+  wl="$acl_cv_wl"
+  acl_libext="$acl_cv_libext"
+  acl_shlibext="$acl_cv_shlibext"
+  acl_libname_spec="$acl_cv_libname_spec"
+  acl_library_names_spec="$acl_cv_library_names_spec"
+  acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+  acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+  acl_hardcode_direct="$acl_cv_hardcode_direct"
+  acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
+    # Check whether --enable-rpath was given.
+if test "${enable_rpath+set}" = set; then :
+  enableval=$enable_rpath; :
+else
+  enable_rpath=yes
+fi
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking 32-bit host C ABI" >&5
+$as_echo_n "checking 32-bit host C ABI... " >&6; }
+if ${gl_cv_host_cpu_c_abi_32bit+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$gl_cv_host_cpu_c_abi"; then
+       case "$gl_cv_host_cpu_c_abi" in
+         i386 | x86_64-x32 | arm | armhf | arm64-ilp32 | hppa | ia64-ilp32 | mips | mipsn32 | powerpc | riscv*-ilp32* | s390 | sparc)
+           gl_cv_host_cpu_c_abi_32bit=yes ;;
+         *)
+           gl_cv_host_cpu_c_abi_32bit=no ;;
+       esac
+     else
+       case "$host_cpu" in
+
+         i[4567]86 )
+           gl_cv_host_cpu_c_abi_32bit=yes
+           ;;
+
+         x86_64 )
+           # On x86_64 systems, the C compiler may be generating code in one of
+           # these ABIs:
+           # - 64-bit instruction set, 64-bit pointers, 64-bit 'long': x86_64.
+           # - 64-bit instruction set, 64-bit pointers, 32-bit 'long': x86_64
+           #   with native Windows (mingw, MSVC).
+           # - 64-bit instruction set, 32-bit pointers, 32-bit 'long': x86_64-x32.
+           # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': i386.
+           cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if (defined __x86_64__ || defined __amd64__ \
+                       || defined _M_X64 || defined _M_AMD64) \
+                      && !(defined __ILP32__ || defined _ILP32)
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gl_cv_host_cpu_c_abi_32bit=no
+else
+  gl_cv_host_cpu_c_abi_32bit=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+           ;;
+
+         arm* | aarch64 )
+           # Assume arm with EABI.
+           # On arm64 systems, the C compiler may be generating code in one of
+           # these ABIs:
+           # - aarch64 instruction set, 64-bit pointers, 64-bit 'long': arm64.
+           # - aarch64 instruction set, 32-bit pointers, 32-bit 'long': arm64-ilp32.
+           # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': arm or armhf.
+           cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if defined __aarch64__ && !(defined __ILP32__ || defined _ILP32)
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gl_cv_host_cpu_c_abi_32bit=no
+else
+  gl_cv_host_cpu_c_abi_32bit=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+           ;;
+
+         hppa1.0 | hppa1.1 | hppa2.0* | hppa64 )
+           # On hppa, the C compiler may be generating 32-bit code or 64-bit
+           # code. In the latter case, it defines _LP64 and __LP64__.
+           cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __LP64__
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gl_cv_host_cpu_c_abi_32bit=no
+else
+  gl_cv_host_cpu_c_abi_32bit=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+           ;;
+
+         ia64* )
+           # On ia64 on HP-UX, the C compiler may be generating 64-bit code or
+           # 32-bit code. In the latter case, it defines _ILP32.
+           cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef _ILP32
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gl_cv_host_cpu_c_abi_32bit=yes
+else
+  gl_cv_host_cpu_c_abi_32bit=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+           ;;
+
+         mips* )
+           # We should also check for (_MIPS_SZPTR == 64), but gcc keeps this
+           # at 32.
+           cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if defined _MIPS_SZLONG && (_MIPS_SZLONG == 64)
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gl_cv_host_cpu_c_abi_32bit=no
+else
+  gl_cv_host_cpu_c_abi_32bit=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+           ;;
+
+         powerpc* )
+           # Different ABIs are in use on AIX vs. Mac OS X vs. Linux,*BSD.
+           # No need to distinguish them here; the caller may distinguish
+           # them based on the OS.
+           # On powerpc64 systems, the C compiler may still be generating
+           # 32-bit code. And on powerpc-ibm-aix systems, the C compiler may
+           # be generating 64-bit code.
+           cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if defined __powerpc64__ || defined _ARCH_PPC64
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gl_cv_host_cpu_c_abi_32bit=no
+else
+  gl_cv_host_cpu_c_abi_32bit=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+           ;;
+
+         rs6000 )
+           gl_cv_host_cpu_c_abi_32bit=yes
+           ;;
+
+         riscv32 | riscv64 )
+           # There are 6 ABIs: ilp32, ilp32f, ilp32d, lp64, lp64f, lp64d.
+           # Size of 'long' and 'void *':
+           cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if defined __LP64__
+                    int ok;
+                  #else
+                    error fail
+                  #endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gl_cv_host_cpu_c_abi_32bit=no
+else
+  gl_cv_host_cpu_c_abi_32bit=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+           ;;
+
+         s390* )
+           # On s390x, the C compiler may be generating 64-bit (= s390x) code
+           # or 31-bit (= s390) code.
+           cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if defined __LP64__ || defined __s390x__
+                    int ok;
+                  #else
+                    error fail
+                  #endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gl_cv_host_cpu_c_abi_32bit=no
+else
+  gl_cv_host_cpu_c_abi_32bit=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+           ;;
+
+         sparc | sparc64 )
+           # UltraSPARCs running Linux have `uname -m` = "sparc64", but the
+           # C compiler still generates 32-bit code.
+           cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if defined __sparcv9 || defined __arch64__
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gl_cv_host_cpu_c_abi_32bit=no
+else
+  gl_cv_host_cpu_c_abi_32bit=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+           ;;
+
+         *)
+           gl_cv_host_cpu_c_abi_32bit=no
+           ;;
+       esac
+     fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_host_cpu_c_abi_32bit" >&5
+$as_echo "$gl_cv_host_cpu_c_abi_32bit" >&6; }
+
+  HOST_CPU_C_ABI_32BIT="$gl_cv_host_cpu_c_abi_32bit"
+
+
+
+
+
+  case "$host_os" in
+    solaris*)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 64-bit host" >&5
+$as_echo_n "checking for 64-bit host... " >&6; }
+if ${gl_cv_solaris_64bit+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef _LP64
+                 int ok;
+                #else
+                 error fail
+                #endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gl_cv_solaris_64bit=yes
+else
+  gl_cv_solaris_64bit=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_solaris_64bit" >&5
+$as_echo "$gl_cv_solaris_64bit" >&6; };;
+  esac
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for the common suffixes of directories in the library search path" >&5
+$as_echo_n "checking for the common suffixes of directories in the library search path... " >&6; }
+if ${acl_cv_libdirstems+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  acl_libdirstem=lib
+     acl_libdirstem2=
+     case "$host_os" in
+       solaris*)
+                                                      if test $gl_cv_solaris_64bit = yes; then
+           acl_libdirstem=lib/64
+           case "$host_cpu" in
+             sparc*)        acl_libdirstem2=lib/sparcv9 ;;
+             i*86 | x86_64) acl_libdirstem2=lib/amd64 ;;
+           esac
+         fi
+         ;;
+       *)
+                           if test "$HOST_CPU_C_ABI_32BIT" != yes; then
+                                            searchpath=`(if test -f /usr/bin/gcc \
+                           && LC_ALL=C /usr/bin/gcc -print-search-dirs >/dev/null 2>/dev/null; then \
+                          LC_ALL=C /usr/bin/gcc -print-search-dirs; \
+                        else \
+                          LC_ALL=C $CC -print-search-dirs; \
+                        fi) 2>/dev/null \
+                       | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
+           if test -n "$searchpath"; then
+             acl_save_IFS="${IFS= 	}"; IFS=":"
+             for searchdir in $searchpath; do
+               if test -d "$searchdir"; then
+                 case "$searchdir" in
+                   */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
+                   */../ | */.. )
+                     # Better ignore directories of this form. They are misleading.
+                     ;;
+                   *) searchdir=`cd "$searchdir" && pwd`
+                      case "$searchdir" in
+                        */lib64 ) acl_libdirstem=lib64 ;;
+                      esac ;;
+                 esac
+               fi
+             done
+             IFS="$acl_save_IFS"
+           fi
+         fi
+         ;;
+     esac
+     test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem"
+     acl_cv_libdirstems="$acl_libdirstem,$acl_libdirstem2"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_libdirstems" >&5
+$as_echo "$acl_cv_libdirstems" >&6; }
+  # Decompose acl_cv_libdirstems into acl_libdirstem and acl_libdirstem2.
+  acl_libdirstem=`echo "$acl_cv_libdirstems" | sed -e 's/,.*//'`
+  acl_libdirstem2=`echo "$acl_cv_libdirstems" | sed -e '/,/s/.*,//'`
+
+
+
+  gl_threads_api=none
+  LIBTHREAD=
+  LTLIBTHREAD=
+  LIBMULTITHREAD=
+  LTLIBMULTITHREAD=
+  if test "$gl_use_threads" != no; then
+        { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether imported symbols can be declared weak" >&5
+$as_echo_n "checking whether imported symbols can be declared weak... " >&6; }
+if ${gl_cv_have_weak+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  gl_cv_have_weak=no
+              cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+extern void xyzzy ();
+#pragma weak xyzzy
+int
+main ()
+{
+xyzzy();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  gl_cv_have_weak=maybe
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+       if test $gl_cv_have_weak = maybe; then
+                           if test "$cross_compiling" = yes; then :
+                          cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __ELF__
+               Extensible Linking Format
+               #endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "Extensible Linking Format" >/dev/null 2>&1; then :
+  gl_cv_have_weak="guessing yes"
+else
+  gl_cv_have_weak="guessing no"
+fi
+rm -f conftest*
+
+
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <stdio.h>
+#pragma weak fputs
+int main ()
+{
+  return (fputs == NULL);
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  gl_cv_have_weak=yes
+else
+  gl_cv_have_weak=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+       fi
+              case " $LDFLAGS " in
+         *" -static "*) gl_cv_have_weak=no ;;
+       esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_have_weak" >&5
+$as_echo "$gl_cv_have_weak" >&6; }
+    if test "$gl_use_threads" = yes || test "$gl_use_threads" = posix; then
+      # On OSF/1, the compiler needs the flag -pthread or -D_REENTRANT so that
+      # it groks <pthread.h>. It's added above, in gl_THREADLIB_EARLY_BODY.
+      ac_fn_c_check_header_mongrel "$LINENO" "pthread.h" "ac_cv_header_pthread_h" "$ac_includes_default"
+if test "x$ac_cv_header_pthread_h" = xyes; then :
+  gl_have_pthread_h=yes
+else
+  gl_have_pthread_h=no
+fi
+
+
+      if test "$gl_have_pthread_h" = yes; then
+        # Other possible tests:
+        #   -lpthreads (FSU threads, PCthreads)
+        #   -lgthreads
+        gl_have_pthread=
+        # Test whether both pthread_mutex_lock and pthread_mutexattr_init exist
+        # in libc. IRIX 6.5 has the first one in both libc and libpthread, but
+        # the second one only in libpthread, and lock.c needs it.
+        #
+        # If -pthread works, prefer it to -lpthread, since Ubuntu 14.04
+        # needs -pthread for some reason.  See:
+        # https://lists.gnu.org/r/bug-gnulib/2014-09/msg00023.html
+        save_LIBS=$LIBS
+        for gl_pthread in '' '-pthread'; do
+          LIBS="$LIBS $gl_pthread"
+          cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <pthread.h>
+                 pthread_mutex_t m;
+                 pthread_mutexattr_t ma;
+
+int
+main ()
+{
+pthread_mutex_lock (&m);
+                 pthread_mutexattr_init (&ma);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  gl_have_pthread=yes
+             LIBTHREAD=$gl_pthread LTLIBTHREAD=$gl_pthread
+             LIBMULTITHREAD=$gl_pthread LTLIBMULTITHREAD=$gl_pthread
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+          LIBS=$save_LIBS
+          test -n "$gl_have_pthread" && break
+        done
+
+        # Test for libpthread by looking for pthread_kill. (Not pthread_self,
+        # since it is defined as a macro on OSF/1.)
+        if test -n "$gl_have_pthread" && test -z "$LIBTHREAD"; then
+          # The program links fine without libpthread. But it may actually
+          # need to link with libpthread in order to create multiple threads.
+          { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_kill in -lpthread" >&5
+$as_echo_n "checking for pthread_kill in -lpthread... " >&6; }
+if ${ac_cv_lib_pthread_pthread_kill+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lpthread  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char pthread_kill ();
+int
+main ()
+{
+return pthread_kill ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_pthread_pthread_kill=yes
+else
+  ac_cv_lib_pthread_pthread_kill=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread_pthread_kill" >&5
+$as_echo "$ac_cv_lib_pthread_pthread_kill" >&6; }
+if test "x$ac_cv_lib_pthread_pthread_kill" = xyes; then :
+  LIBMULTITHREAD=-lpthread LTLIBMULTITHREAD=-lpthread
+             # On Solaris and HP-UX, most pthread functions exist also in libc.
+             # Therefore pthread_in_use() needs to actually try to create a
+             # thread: pthread_create from libc will fail, whereas
+             # pthread_create will actually create a thread.
+             # On Solaris 10 or newer, this test is no longer needed, because
+             # libc contains the fully functional pthread functions.
+             case "$host_os" in
+               solaris | solaris2.1-9 | solaris2.1-9.* | hpux*)
+
+$as_echo "#define PTHREAD_IN_USE_DETECTION_HARD 1" >>confdefs.h
+
+             esac
+
+fi
+
+        elif test -z "$gl_have_pthread"; then
+          # Some library is needed. Try libpthread and libc_r.
+          { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_kill in -lpthread" >&5
+$as_echo_n "checking for pthread_kill in -lpthread... " >&6; }
+if ${ac_cv_lib_pthread_pthread_kill+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lpthread  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char pthread_kill ();
+int
+main ()
+{
+return pthread_kill ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_pthread_pthread_kill=yes
+else
+  ac_cv_lib_pthread_pthread_kill=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread_pthread_kill" >&5
+$as_echo "$ac_cv_lib_pthread_pthread_kill" >&6; }
+if test "x$ac_cv_lib_pthread_pthread_kill" = xyes; then :
+  gl_have_pthread=yes
+             LIBTHREAD=-lpthread LTLIBTHREAD=-lpthread
+             LIBMULTITHREAD=-lpthread LTLIBMULTITHREAD=-lpthread
+fi
+
+          if test -z "$gl_have_pthread"; then
+            # For FreeBSD 4.
+            { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_kill in -lc_r" >&5
+$as_echo_n "checking for pthread_kill in -lc_r... " >&6; }
+if ${ac_cv_lib_c_r_pthread_kill+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lc_r  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char pthread_kill ();
+int
+main ()
+{
+return pthread_kill ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_c_r_pthread_kill=yes
+else
+  ac_cv_lib_c_r_pthread_kill=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_c_r_pthread_kill" >&5
+$as_echo "$ac_cv_lib_c_r_pthread_kill" >&6; }
+if test "x$ac_cv_lib_c_r_pthread_kill" = xyes; then :
+  gl_have_pthread=yes
+               LIBTHREAD=-lc_r LTLIBTHREAD=-lc_r
+               LIBMULTITHREAD=-lc_r LTLIBMULTITHREAD=-lc_r
+fi
+
+          fi
+        fi
+        if test -n "$gl_have_pthread"; then
+          gl_threads_api=posix
+
+$as_echo "#define USE_POSIX_THREADS 1" >>confdefs.h
+
+          if test -n "$LIBMULTITHREAD" || test -n "$LTLIBMULTITHREAD"; then
+            if case "$gl_cv_have_weak" in *yes) true;; *) false;; esac; then
+
+$as_echo "#define USE_POSIX_THREADS_WEAK 1" >>confdefs.h
+
+              LIBTHREAD=
+              LTLIBTHREAD=
+            fi
+          fi
+        fi
+      fi
+    fi
+    if test -z "$gl_have_pthread"; then
+      if test "$gl_use_threads" = yes || test "$gl_use_threads" = solaris; then
+        gl_have_solaristhread=
+        gl_save_LIBS="$LIBS"
+        LIBS="$LIBS -lthread"
+        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <thread.h>
+#include <synch.h>
+
+int
+main ()
+{
+thr_self();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  gl_have_solaristhread=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+        LIBS="$gl_save_LIBS"
+        if test -n "$gl_have_solaristhread"; then
+          gl_threads_api=solaris
+          LIBTHREAD=-lthread
+          LTLIBTHREAD=-lthread
+          LIBMULTITHREAD="$LIBTHREAD"
+          LTLIBMULTITHREAD="$LTLIBTHREAD"
+
+$as_echo "#define USE_SOLARIS_THREADS 1" >>confdefs.h
+
+          if case "$gl_cv_have_weak" in *yes) true;; *) false;; esac; then
+
+$as_echo "#define USE_SOLARIS_THREADS_WEAK 1" >>confdefs.h
+
+            LIBTHREAD=
+            LTLIBTHREAD=
+          fi
+        fi
+      fi
+    fi
+    if test "$gl_use_threads" = pth; then
+      gl_save_CPPFLAGS="$CPPFLAGS"
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libpth" >&5
+$as_echo_n "checking how to link with libpth... " >&6; }
+if ${ac_cv_libpth_libs+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+
+
+
+
+
+
+    use_additional=yes
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+
+    eval additional_includedir=\"$includedir\"
+    eval additional_libdir=\"$libdir\"
+
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+
+# Check whether --with-libpth-prefix was given.
+if test "${with_libpth_prefix+set}" = set; then :
+  withval=$with_libpth_prefix;
+    if test "X$withval" = "Xno"; then
+      use_additional=no
+    else
+      if test "X$withval" = "X"; then
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+
+          eval additional_includedir=\"$includedir\"
+          eval additional_libdir=\"$libdir\"
+
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+      else
+        additional_includedir="$withval/include"
+        additional_libdir="$withval/$acl_libdirstem"
+        if test "$acl_libdirstem2" != "$acl_libdirstem" \
+           && test ! -d "$withval/$acl_libdirstem"; then
+          additional_libdir="$withval/$acl_libdirstem2"
+        fi
+      fi
+    fi
+
+fi
+
+      LIBPTH=
+  LTLIBPTH=
+  INCPTH=
+  LIBPTH_PREFIX=
+      HAVE_LIBPTH=
+  rpathdirs=
+  ltrpathdirs=
+  names_already_handled=
+  names_next_round='pth '
+  while test -n "$names_next_round"; do
+    names_this_round="$names_next_round"
+    names_next_round=
+    for name in $names_this_round; do
+      already_handled=
+      for n in $names_already_handled; do
+        if test "$n" = "$name"; then
+          already_handled=yes
+          break
+        fi
+      done
+      if test -z "$already_handled"; then
+        names_already_handled="$names_already_handled $name"
+                        uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'`
+        eval value=\"\$HAVE_LIB$uppername\"
+        if test -n "$value"; then
+          if test "$value" = yes; then
+            eval value=\"\$LIB$uppername\"
+            test -z "$value" || LIBPTH="${LIBPTH}${LIBPTH:+ }$value"
+            eval value=\"\$LTLIB$uppername\"
+            test -z "$value" || LTLIBPTH="${LTLIBPTH}${LTLIBPTH:+ }$value"
+          else
+                                    :
+          fi
+        else
+                              found_dir=
+          found_la=
+          found_so=
+          found_a=
+          eval libname=\"$acl_libname_spec\"    # typically: libname=lib$name
+          if test -n "$acl_shlibext"; then
+            shrext=".$acl_shlibext"             # typically: shrext=.so
+          else
+            shrext=
+          fi
+          if test $use_additional = yes; then
+            dir="$additional_libdir"
+                                    if test -n "$acl_shlibext"; then
+              if test -f "$dir/$libname$shrext"; then
+                found_dir="$dir"
+                found_so="$dir/$libname$shrext"
+              else
+                if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                  ver=`(cd "$dir" && \
+                        for f in "$libname$shrext".*; do echo "$f"; done \
+                        | sed -e "s,^$libname$shrext\\\\.,," \
+                        | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                        | sed 1q ) 2>/dev/null`
+                  if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                    found_dir="$dir"
+                    found_so="$dir/$libname$shrext.$ver"
+                  fi
+                else
+                  eval library_names=\"$acl_library_names_spec\"
+                  for f in $library_names; do
+                    if test -f "$dir/$f"; then
+                      found_dir="$dir"
+                      found_so="$dir/$f"
+                      break
+                    fi
+                  done
+                fi
+              fi
+            fi
+                        if test "X$found_dir" = "X"; then
+              if test -f "$dir/$libname.$acl_libext"; then
+                found_dir="$dir"
+                found_a="$dir/$libname.$acl_libext"
+              fi
+            fi
+            if test "X$found_dir" != "X"; then
+              if test -f "$dir/$libname.la"; then
+                found_la="$dir/$libname.la"
+              fi
+            fi
+          fi
+          if test "X$found_dir" = "X"; then
+            for x in $LDFLAGS $LTLIBPTH; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+              case "$x" in
+                -L*)
+                  dir=`echo "X$x" | sed -e 's/^X-L//'`
+                                    if test -n "$acl_shlibext"; then
+                    if test -f "$dir/$libname$shrext"; then
+                      found_dir="$dir"
+                      found_so="$dir/$libname$shrext"
+                    else
+                      if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                        ver=`(cd "$dir" && \
+                              for f in "$libname$shrext".*; do echo "$f"; done \
+                              | sed -e "s,^$libname$shrext\\\\.,," \
+                              | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                              | sed 1q ) 2>/dev/null`
+                        if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                          found_dir="$dir"
+                          found_so="$dir/$libname$shrext.$ver"
+                        fi
+                      else
+                        eval library_names=\"$acl_library_names_spec\"
+                        for f in $library_names; do
+                          if test -f "$dir/$f"; then
+                            found_dir="$dir"
+                            found_so="$dir/$f"
+                            break
+                          fi
+                        done
+                      fi
+                    fi
+                  fi
+                                    if test "X$found_dir" = "X"; then
+                    if test -f "$dir/$libname.$acl_libext"; then
+                      found_dir="$dir"
+                      found_a="$dir/$libname.$acl_libext"
+                    fi
+                  fi
+                  if test "X$found_dir" != "X"; then
+                    if test -f "$dir/$libname.la"; then
+                      found_la="$dir/$libname.la"
+                    fi
+                  fi
+                  ;;
+              esac
+              if test "X$found_dir" != "X"; then
+                break
+              fi
+            done
+          fi
+          if test "X$found_dir" != "X"; then
+                        LTLIBPTH="${LTLIBPTH}${LTLIBPTH:+ }-L$found_dir -l$name"
+            if test "X$found_so" != "X"; then
+                                                        if test "$enable_rpath" = no \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem" \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
+                                LIBPTH="${LIBPTH}${LIBPTH:+ }$found_so"
+              else
+                                                                                haveit=
+                for x in $ltrpathdirs; do
+                  if test "X$x" = "X$found_dir"; then
+                    haveit=yes
+                    break
+                  fi
+                done
+                if test -z "$haveit"; then
+                  ltrpathdirs="$ltrpathdirs $found_dir"
+                fi
+                                if test "$acl_hardcode_direct" = yes; then
+                                                      LIBPTH="${LIBPTH}${LIBPTH:+ }$found_so"
+                else
+                  if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+                                                            LIBPTH="${LIBPTH}${LIBPTH:+ }$found_so"
+                                                            haveit=
+                    for x in $rpathdirs; do
+                      if test "X$x" = "X$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      rpathdirs="$rpathdirs $found_dir"
+                    fi
+                  else
+                                                                                haveit=
+                    for x in $LDFLAGS $LIBPTH; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                      if test "X$x" = "X-L$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      LIBPTH="${LIBPTH}${LIBPTH:+ }-L$found_dir"
+                    fi
+                    if test "$acl_hardcode_minus_L" != no; then
+                                                                                        LIBPTH="${LIBPTH}${LIBPTH:+ }$found_so"
+                    else
+                                                                                                                                                                                LIBPTH="${LIBPTH}${LIBPTH:+ }-l$name"
+                    fi
+                  fi
+                fi
+              fi
+            else
+              if test "X$found_a" != "X"; then
+                                LIBPTH="${LIBPTH}${LIBPTH:+ }$found_a"
+              else
+                                                LIBPTH="${LIBPTH}${LIBPTH:+ }-L$found_dir -l$name"
+              fi
+            fi
+                        additional_includedir=
+            case "$found_dir" in
+              */$acl_libdirstem | */$acl_libdirstem/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
+                if test "$name" = 'pth'; then
+                  LIBPTH_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+              */$acl_libdirstem2 | */$acl_libdirstem2/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
+                if test "$name" = 'pth'; then
+                  LIBPTH_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+            esac
+            if test "X$additional_includedir" != "X"; then
+                                                                                                                if test "X$additional_includedir" != "X/usr/include"; then
+                haveit=
+                if test "X$additional_includedir" = "X/usr/local/include"; then
+                  if test -n "$GCC"; then
+                    case $host_os in
+                      linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                    esac
+                  fi
+                fi
+                if test -z "$haveit"; then
+                  for x in $CPPFLAGS $INCPTH; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                    if test "X$x" = "X-I$additional_includedir"; then
+                      haveit=yes
+                      break
+                    fi
+                  done
+                  if test -z "$haveit"; then
+                    if test -d "$additional_includedir"; then
+                                            INCPTH="${INCPTH}${INCPTH:+ }-I$additional_includedir"
+                    fi
+                  fi
+                fi
+              fi
+            fi
+                        if test -n "$found_la"; then
+                                                        save_libdir="$libdir"
+              case "$found_la" in
+                */* | *\\*) . "$found_la" ;;
+                *) . "./$found_la" ;;
+              esac
+              libdir="$save_libdir"
+                            for dep in $dependency_libs; do
+                case "$dep" in
+                  -L*)
+                    additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+                                                                                                                                                                if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
+                       && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
+                      haveit=
+                      if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
+                         || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
+                        if test -n "$GCC"; then
+                          case $host_os in
+                            linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                          esac
+                        fi
+                      fi
+                      if test -z "$haveit"; then
+                        haveit=
+                        for x in $LDFLAGS $LIBPTH; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                                                        LIBPTH="${LIBPTH}${LIBPTH:+ }-L$additional_libdir"
+                          fi
+                        fi
+                        haveit=
+                        for x in $LDFLAGS $LTLIBPTH; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                                                        LTLIBPTH="${LTLIBPTH}${LTLIBPTH:+ }-L$additional_libdir"
+                          fi
+                        fi
+                      fi
+                    fi
+                    ;;
+                  -R*)
+                    dir=`echo "X$dep" | sed -e 's/^X-R//'`
+                    if test "$enable_rpath" != no; then
+                                                                  haveit=
+                      for x in $rpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        rpathdirs="$rpathdirs $dir"
+                      fi
+                                                                  haveit=
+                      for x in $ltrpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        ltrpathdirs="$ltrpathdirs $dir"
+                      fi
+                    fi
+                    ;;
+                  -l*)
+                                        names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+                    ;;
+                  *.la)
+                                                                                names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+                    ;;
+                  *)
+                                        LIBPTH="${LIBPTH}${LIBPTH:+ }$dep"
+                    LTLIBPTH="${LTLIBPTH}${LTLIBPTH:+ }$dep"
+                    ;;
+                esac
+              done
+            fi
+          else
+                                                            LIBPTH="${LIBPTH}${LIBPTH:+ }-l$name"
+            LTLIBPTH="${LTLIBPTH}${LTLIBPTH:+ }-l$name"
+          fi
+        fi
+      fi
+    done
+  done
+  if test "X$rpathdirs" != "X"; then
+    if test -n "$acl_hardcode_libdir_separator"; then
+                        alldirs=
+      for found_dir in $rpathdirs; do
+        alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
+      done
+            acl_save_libdir="$libdir"
+      libdir="$alldirs"
+      eval flag=\"$acl_hardcode_libdir_flag_spec\"
+      libdir="$acl_save_libdir"
+      LIBPTH="${LIBPTH}${LIBPTH:+ }$flag"
+    else
+            for found_dir in $rpathdirs; do
+        acl_save_libdir="$libdir"
+        libdir="$found_dir"
+        eval flag=\"$acl_hardcode_libdir_flag_spec\"
+        libdir="$acl_save_libdir"
+        LIBPTH="${LIBPTH}${LIBPTH:+ }$flag"
+      done
+    fi
+  fi
+  if test "X$ltrpathdirs" != "X"; then
+            for found_dir in $ltrpathdirs; do
+      LTLIBPTH="${LTLIBPTH}${LTLIBPTH:+ }-R$found_dir"
+    done
+  fi
+
+
+
+
+
+    ac_cv_libpth_libs="$LIBPTH"
+    ac_cv_libpth_ltlibs="$LTLIBPTH"
+    ac_cv_libpth_cppflags="$INCPTH"
+    ac_cv_libpth_prefix="$LIBPTH_PREFIX"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_libpth_libs" >&5
+$as_echo "$ac_cv_libpth_libs" >&6; }
+  LIBPTH="$ac_cv_libpth_libs"
+  LTLIBPTH="$ac_cv_libpth_ltlibs"
+  INCPTH="$ac_cv_libpth_cppflags"
+  LIBPTH_PREFIX="$ac_cv_libpth_prefix"
+
+  for element in $INCPTH; do
+    haveit=
+    for x in $CPPFLAGS; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+      if test "X$x" = "X$element"; then
+        haveit=yes
+        break
+      fi
+    done
+    if test -z "$haveit"; then
+      CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+    fi
+  done
+
+
+
+
+      HAVE_LIBPTH=yes
+
+
+
+      gl_have_pth=
+      gl_save_LIBS="$LIBS"
+      LIBS="$LIBS $LIBPTH"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <pth.h>
+int
+main ()
+{
+pth_self();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  gl_have_pth=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+      LIBS="$gl_save_LIBS"
+      if test -n "$gl_have_pth"; then
+        gl_threads_api=pth
+        LIBTHREAD="$LIBPTH"
+        LTLIBTHREAD="$LTLIBPTH"
+        LIBMULTITHREAD="$LIBTHREAD"
+        LTLIBMULTITHREAD="$LTLIBTHREAD"
+
+$as_echo "#define USE_PTH_THREADS 1" >>confdefs.h
+
+        if test -n "$LIBMULTITHREAD" || test -n "$LTLIBMULTITHREAD"; then
+          if case "$gl_cv_have_weak" in *yes) true;; *) false;; esac; then
+
+$as_echo "#define USE_PTH_THREADS_WEAK 1" >>confdefs.h
+
+            LIBTHREAD=
+            LTLIBTHREAD=
+          fi
+        fi
+      else
+        CPPFLAGS="$gl_save_CPPFLAGS"
+      fi
+    fi
+    if test -z "$gl_have_pthread"; then
+      case "$gl_use_threads" in
+        yes | windows | win32) # The 'win32' is for backward compatibility.
+          if { case "$host_os" in
+                 mingw*) true;;
+                 *) false;;
+               esac
+             }; then
+            gl_threads_api=windows
+
+$as_echo "#define USE_WINDOWS_THREADS 1" >>confdefs.h
+
+          fi
+          ;;
+      esac
+    fi
+  fi
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for multithread API to use" >&5
+$as_echo_n "checking for multithread API to use... " >&6; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_threads_api" >&5
+$as_echo "$gl_threads_api" >&6; }
+
+
+
+
+
+
+
+
+
+
+
+  if test "$gl_threads_api" = posix; then
+    # OSF/1 4.0 and Mac OS X 10.1 lack the pthread_rwlock_t type and the
+    # pthread_rwlock_* functions.
+    has_rwlock=false
+    ac_fn_c_check_type "$LINENO" "pthread_rwlock_t" "ac_cv_type_pthread_rwlock_t" "#include <pthread.h>
+"
+if test "x$ac_cv_type_pthread_rwlock_t" = xyes; then :
+  has_rwlock=true
+
+$as_echo "#define HAVE_PTHREAD_RWLOCK 1" >>confdefs.h
+
+fi
+
+    if $has_rwlock; then
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether pthread_rwlock_rdlock prefers a writer to a reader" >&5
+$as_echo_n "checking whether pthread_rwlock_rdlock prefers a writer to a reader... " >&6; }
+if ${gl_cv_pthread_rwlock_rdlock_prefer_writer+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  save_LIBS="$LIBS"
+     LIBS="$LIBS $LIBMULTITHREAD"
+     if test "$cross_compiling" = yes; then :
+  gl_cv_pthread_rwlock_rdlock_prefer_writer="guessing yes"
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <errno.h>
+#include <pthread.h>
+#include <stdlib.h>
+#include <unistd.h>
+
+#define SUCCEED() exit (0)
+#define FAILURE() exit (1)
+#define UNEXPECTED(n) (exit (10 + (n)))
+
+/* The main thread creates the waiting writer and the requesting reader threads
+   in the default way; this guarantees that they have the same priority.
+   We can reuse the main thread as first reader thread.  */
+
+static pthread_rwlock_t lock;
+static pthread_t reader1;
+static pthread_t writer;
+static pthread_t reader2;
+static pthread_t timer;
+/* Used to pass control from writer to reader2 and from reader2 to timer,
+   as in a relay race.
+   Passing control from one running thread to another running thread
+   is most likely faster than to create the second thread.  */
+static pthread_mutex_t baton;
+
+static void *
+timer_func (void *ignored)
+{
+  /* Step 13 (can be before or after step 12):
+     The timer thread takes the baton, then waits a moment to make sure
+     it can tell whether the second reader thread is blocked at step 12.  */
+  if (pthread_mutex_lock (&baton))
+    UNEXPECTED (13);
+  usleep (100000);
+  /* By the time we get here, it's clear that the second reader thread is
+     blocked at step 12.  This is the desired behaviour.  */
+  SUCCEED ();
+}
+
+static void *
+reader2_func (void *ignored)
+{
+  int err;
+
+  /* Step 8 (can be before or after step 7):
+     The second reader thread takes the baton, then waits a moment to make sure
+     the writer thread has reached step 7.  */
+  if (pthread_mutex_lock (&baton))
+    UNEXPECTED (8);
+  usleep (100000);
+  /* Step 9: The second reader thread requests the lock.  */
+  err = pthread_rwlock_tryrdlock (&lock);
+  if (err == 0)
+    FAILURE ();
+  else if (err != EBUSY)
+    UNEXPECTED (9);
+  /* Step 10: Launch a timer, to test whether the next call blocks.  */
+  if (pthread_create (&timer, NULL, timer_func, NULL))
+    UNEXPECTED (10);
+  /* Step 11: Release the baton.  */
+  if (pthread_mutex_unlock (&baton))
+    UNEXPECTED (11);
+  /* Step 12: The second reader thread requests the lock.  */
+  err = pthread_rwlock_rdlock (&lock);
+  if (err == 0)
+    FAILURE ();
+  else
+    UNEXPECTED (12);
+}
+
+static void *
+writer_func (void *ignored)
+{
+  /* Step 4: Take the baton, so that the second reader thread does not go ahead
+     too early.  */
+  if (pthread_mutex_lock (&baton))
+    UNEXPECTED (4);
+  /* Step 5: Create the second reader thread.  */
+  if (pthread_create (&reader2, NULL, reader2_func, NULL))
+    UNEXPECTED (5);
+  /* Step 6: Release the baton.  */
+  if (pthread_mutex_unlock (&baton))
+    UNEXPECTED (6);
+  /* Step 7: The writer thread requests the lock.  */
+  if (pthread_rwlock_wrlock (&lock))
+    UNEXPECTED (7);
+  return NULL;
+}
+
+int
+main ()
+{
+  reader1 = pthread_self ();
+
+  /* Step 1: The main thread initializes the lock and the baton.  */
+  if (pthread_rwlock_init (&lock, NULL))
+    UNEXPECTED (1);
+  if (pthread_mutex_init (&baton, NULL))
+    UNEXPECTED (1);
+  /* Step 2: The main thread acquires the lock as a reader.  */
+  if (pthread_rwlock_rdlock (&lock))
+    UNEXPECTED (2);
+  /* Step 3: Create the writer thread.  */
+  if (pthread_create (&writer, NULL, writer_func, NULL))
+    UNEXPECTED (3);
+  /* Job done.  Go to sleep.  */
+  for (;;)
+    {
+      sleep (1);
+    }
+}
+
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  gl_cv_pthread_rwlock_rdlock_prefer_writer=yes
+else
+  gl_cv_pthread_rwlock_rdlock_prefer_writer=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+     LIBS="$save_LIBS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_pthread_rwlock_rdlock_prefer_writer" >&5
+$as_echo "$gl_cv_pthread_rwlock_rdlock_prefer_writer" >&6; }
+  case "$gl_cv_pthread_rwlock_rdlock_prefer_writer" in
+    *yes)
+
+$as_echo "#define HAVE_PTHREAD_RWLOCK_RDLOCK_PREFER_WRITER 1" >>confdefs.h
+
+      ;;
+  esac
+
+    fi
+    # glibc defines PTHREAD_MUTEX_RECURSIVE as enum, not as a macro.
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+      #include <pthread.h>
+int
+main ()
+{
+
+#if __FreeBSD__ == 4
+error "No, in FreeBSD 4.0 recursive mutexes actually don't work."
+#elif (defined __ENVIRONMENT_MAC_OS_X_VERSION_MIN_REQUIRED__ \
+       && __ENVIRONMENT_MAC_OS_X_VERSION_MIN_REQUIRED__ < 1070)
+error "No, in Mac OS X < 10.7 recursive mutexes actually don't work."
+#else
+int x = (int)PTHREAD_MUTEX_RECURSIVE;
+return !x;
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+$as_echo "#define HAVE_PTHREAD_MUTEX_RECURSIVE 1" >>confdefs.h
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  fi
+  :
+
+
+
+
+
+
+
+
+
+
+
+    use_additional=yes
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+
+    eval additional_includedir=\"$includedir\"
+    eval additional_libdir=\"$libdir\"
+
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+
+# Check whether --with-libiconv-prefix was given.
+if test "${with_libiconv_prefix+set}" = set; then :
+  withval=$with_libiconv_prefix;
+    if test "X$withval" = "Xno"; then
+      use_additional=no
+    else
+      if test "X$withval" = "X"; then
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+
+          eval additional_includedir=\"$includedir\"
+          eval additional_libdir=\"$libdir\"
+
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+      else
+        additional_includedir="$withval/include"
+        additional_libdir="$withval/$acl_libdirstem"
+        if test "$acl_libdirstem2" != "$acl_libdirstem" \
+           && test ! -d "$withval/$acl_libdirstem"; then
+          additional_libdir="$withval/$acl_libdirstem2"
+        fi
+      fi
+    fi
+
+fi
+
+      LIBICONV=
+  LTLIBICONV=
+  INCICONV=
+  LIBICONV_PREFIX=
+      HAVE_LIBICONV=
+  rpathdirs=
+  ltrpathdirs=
+  names_already_handled=
+  names_next_round='iconv '
+  while test -n "$names_next_round"; do
+    names_this_round="$names_next_round"
+    names_next_round=
+    for name in $names_this_round; do
+      already_handled=
+      for n in $names_already_handled; do
+        if test "$n" = "$name"; then
+          already_handled=yes
+          break
+        fi
+      done
+      if test -z "$already_handled"; then
+        names_already_handled="$names_already_handled $name"
+                        uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'`
+        eval value=\"\$HAVE_LIB$uppername\"
+        if test -n "$value"; then
+          if test "$value" = yes; then
+            eval value=\"\$LIB$uppername\"
+            test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value"
+            eval value=\"\$LTLIB$uppername\"
+            test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value"
+          else
+                                    :
+          fi
+        else
+                              found_dir=
+          found_la=
+          found_so=
+          found_a=
+          eval libname=\"$acl_libname_spec\"    # typically: libname=lib$name
+          if test -n "$acl_shlibext"; then
+            shrext=".$acl_shlibext"             # typically: shrext=.so
+          else
+            shrext=
+          fi
+          if test $use_additional = yes; then
+            dir="$additional_libdir"
+                                    if test -n "$acl_shlibext"; then
+              if test -f "$dir/$libname$shrext"; then
+                found_dir="$dir"
+                found_so="$dir/$libname$shrext"
+              else
+                if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                  ver=`(cd "$dir" && \
+                        for f in "$libname$shrext".*; do echo "$f"; done \
+                        | sed -e "s,^$libname$shrext\\\\.,," \
+                        | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                        | sed 1q ) 2>/dev/null`
+                  if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                    found_dir="$dir"
+                    found_so="$dir/$libname$shrext.$ver"
+                  fi
+                else
+                  eval library_names=\"$acl_library_names_spec\"
+                  for f in $library_names; do
+                    if test -f "$dir/$f"; then
+                      found_dir="$dir"
+                      found_so="$dir/$f"
+                      break
+                    fi
+                  done
+                fi
+              fi
+            fi
+                        if test "X$found_dir" = "X"; then
+              if test -f "$dir/$libname.$acl_libext"; then
+                found_dir="$dir"
+                found_a="$dir/$libname.$acl_libext"
+              fi
+            fi
+            if test "X$found_dir" != "X"; then
+              if test -f "$dir/$libname.la"; then
+                found_la="$dir/$libname.la"
+              fi
+            fi
+          fi
+          if test "X$found_dir" = "X"; then
+            for x in $LDFLAGS $LTLIBICONV; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+              case "$x" in
+                -L*)
+                  dir=`echo "X$x" | sed -e 's/^X-L//'`
+                                    if test -n "$acl_shlibext"; then
+                    if test -f "$dir/$libname$shrext"; then
+                      found_dir="$dir"
+                      found_so="$dir/$libname$shrext"
+                    else
+                      if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                        ver=`(cd "$dir" && \
+                              for f in "$libname$shrext".*; do echo "$f"; done \
+                              | sed -e "s,^$libname$shrext\\\\.,," \
+                              | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                              | sed 1q ) 2>/dev/null`
+                        if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                          found_dir="$dir"
+                          found_so="$dir/$libname$shrext.$ver"
+                        fi
+                      else
+                        eval library_names=\"$acl_library_names_spec\"
+                        for f in $library_names; do
+                          if test -f "$dir/$f"; then
+                            found_dir="$dir"
+                            found_so="$dir/$f"
+                            break
+                          fi
+                        done
+                      fi
+                    fi
+                  fi
+                                    if test "X$found_dir" = "X"; then
+                    if test -f "$dir/$libname.$acl_libext"; then
+                      found_dir="$dir"
+                      found_a="$dir/$libname.$acl_libext"
+                    fi
+                  fi
+                  if test "X$found_dir" != "X"; then
+                    if test -f "$dir/$libname.la"; then
+                      found_la="$dir/$libname.la"
+                    fi
+                  fi
+                  ;;
+              esac
+              if test "X$found_dir" != "X"; then
+                break
+              fi
+            done
+          fi
+          if test "X$found_dir" != "X"; then
+                        LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name"
+            if test "X$found_so" != "X"; then
+                                                        if test "$enable_rpath" = no \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem" \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
+                                LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+              else
+                                                                                haveit=
+                for x in $ltrpathdirs; do
+                  if test "X$x" = "X$found_dir"; then
+                    haveit=yes
+                    break
+                  fi
+                done
+                if test -z "$haveit"; then
+                  ltrpathdirs="$ltrpathdirs $found_dir"
+                fi
+                                if test "$acl_hardcode_direct" = yes; then
+                                                      LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+                else
+                  if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+                                                            LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+                                                            haveit=
+                    for x in $rpathdirs; do
+                      if test "X$x" = "X$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      rpathdirs="$rpathdirs $found_dir"
+                    fi
+                  else
+                                                                                haveit=
+                    for x in $LDFLAGS $LIBICONV; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                      if test "X$x" = "X-L$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir"
+                    fi
+                    if test "$acl_hardcode_minus_L" != no; then
+                                                                                        LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+                    else
+                                                                                                                                                                                LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+                    fi
+                  fi
+                fi
+              fi
+            else
+              if test "X$found_a" != "X"; then
+                                LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a"
+              else
+                                                LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name"
+              fi
+            fi
+                        additional_includedir=
+            case "$found_dir" in
+              */$acl_libdirstem | */$acl_libdirstem/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
+                if test "$name" = 'iconv'; then
+                  LIBICONV_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+              */$acl_libdirstem2 | */$acl_libdirstem2/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
+                if test "$name" = 'iconv'; then
+                  LIBICONV_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+            esac
+            if test "X$additional_includedir" != "X"; then
+                                                                                                                if test "X$additional_includedir" != "X/usr/include"; then
+                haveit=
+                if test "X$additional_includedir" = "X/usr/local/include"; then
+                  if test -n "$GCC"; then
+                    case $host_os in
+                      linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                    esac
+                  fi
+                fi
+                if test -z "$haveit"; then
+                  for x in $CPPFLAGS $INCICONV; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                    if test "X$x" = "X-I$additional_includedir"; then
+                      haveit=yes
+                      break
+                    fi
+                  done
+                  if test -z "$haveit"; then
+                    if test -d "$additional_includedir"; then
+                                            INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir"
+                    fi
+                  fi
+                fi
+              fi
+            fi
+                        if test -n "$found_la"; then
+                                                        save_libdir="$libdir"
+              case "$found_la" in
+                */* | *\\*) . "$found_la" ;;
+                *) . "./$found_la" ;;
+              esac
+              libdir="$save_libdir"
+                            for dep in $dependency_libs; do
+                case "$dep" in
+                  -L*)
+                    additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+                                                                                                                                                                if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
+                       && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
+                      haveit=
+                      if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
+                         || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
+                        if test -n "$GCC"; then
+                          case $host_os in
+                            linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                          esac
+                        fi
+                      fi
+                      if test -z "$haveit"; then
+                        haveit=
+                        for x in $LDFLAGS $LIBICONV; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                                                        LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir"
+                          fi
+                        fi
+                        haveit=
+                        for x in $LDFLAGS $LTLIBICONV; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                                                        LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir"
+                          fi
+                        fi
+                      fi
+                    fi
+                    ;;
+                  -R*)
+                    dir=`echo "X$dep" | sed -e 's/^X-R//'`
+                    if test "$enable_rpath" != no; then
+                                                                  haveit=
+                      for x in $rpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        rpathdirs="$rpathdirs $dir"
+                      fi
+                                                                  haveit=
+                      for x in $ltrpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        ltrpathdirs="$ltrpathdirs $dir"
+                      fi
+                    fi
+                    ;;
+                  -l*)
+                                        names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+                    ;;
+                  *.la)
+                                                                                names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+                    ;;
+                  *)
+                                        LIBICONV="${LIBICONV}${LIBICONV:+ }$dep"
+                    LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep"
+                    ;;
+                esac
+              done
+            fi
+          else
+                                                            LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+            LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name"
+          fi
+        fi
+      fi
+    done
+  done
+  if test "X$rpathdirs" != "X"; then
+    if test -n "$acl_hardcode_libdir_separator"; then
+                        alldirs=
+      for found_dir in $rpathdirs; do
+        alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
+      done
+            acl_save_libdir="$libdir"
+      libdir="$alldirs"
+      eval flag=\"$acl_hardcode_libdir_flag_spec\"
+      libdir="$acl_save_libdir"
+      LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
+    else
+            for found_dir in $rpathdirs; do
+        acl_save_libdir="$libdir"
+        libdir="$found_dir"
+        eval flag=\"$acl_hardcode_libdir_flag_spec\"
+        libdir="$acl_save_libdir"
+        LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
+      done
+    fi
+  fi
+  if test "X$ltrpathdirs" != "X"; then
+            for found_dir in $ltrpathdirs; do
+      LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir"
+    done
+  fi
+
+
+
+
+
+
+
+
+
+
+
+          am_save_CPPFLAGS="$CPPFLAGS"
+
+  for element in $INCICONV; do
+    haveit=
+    for x in $CPPFLAGS; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+      if test "X$x" = "X$element"; then
+        haveit=yes
+        break
+      fi
+    done
+    if test -z "$haveit"; then
+      CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+    fi
+  done
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5
+$as_echo_n "checking for iconv... " >&6; }
+if ${am_cv_func_iconv+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    am_cv_func_iconv="no, consider installing GNU libiconv"
+    am_cv_lib_iconv=no
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <stdlib.h>
+#include <iconv.h>
+
+int
+main ()
+{
+iconv_t cd = iconv_open("","");
+           iconv(cd,NULL,NULL,NULL,NULL);
+           iconv_close(cd);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  am_cv_func_iconv=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    if test "$am_cv_func_iconv" != yes; then
+      am_save_LIBS="$LIBS"
+      LIBS="$LIBS $LIBICONV"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <stdlib.h>
+#include <iconv.h>
+
+int
+main ()
+{
+iconv_t cd = iconv_open("","");
+             iconv(cd,NULL,NULL,NULL,NULL);
+             iconv_close(cd);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  am_cv_lib_iconv=yes
+        am_cv_func_iconv=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+      LIBS="$am_save_LIBS"
+    fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5
+$as_echo "$am_cv_func_iconv" >&6; }
+  if test "$am_cv_func_iconv" = yes; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working iconv" >&5
+$as_echo_n "checking for working iconv... " >&6; }
+if ${am_cv_func_iconv_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+                  am_save_LIBS="$LIBS"
+      if test $am_cv_lib_iconv = yes; then
+        LIBS="$LIBS $LIBICONV"
+      fi
+      am_cv_func_iconv_works=no
+      for ac_iconv_const in '' 'const'; do
+        if test "$cross_compiling" = yes; then :
+  case "$host_os" in
+             aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
+             *)            am_cv_func_iconv_works="guessing yes" ;;
+           esac
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <iconv.h>
+#include <string.h>
+
+#ifndef ICONV_CONST
+# define ICONV_CONST $ac_iconv_const
+#endif
+
+int
+main ()
+{
+int result = 0;
+  /* Test against AIX 5.1 bug: Failures are not distinguishable from successful
+     returns.  */
+  {
+    iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
+    if (cd_utf8_to_88591 != (iconv_t)(-1))
+      {
+        static ICONV_CONST char input[] = "\342\202\254"; /* EURO SIGN */
+        char buf[10];
+        ICONV_CONST char *inptr = input;
+        size_t inbytesleft = strlen (input);
+        char *outptr = buf;
+        size_t outbytesleft = sizeof (buf);
+        size_t res = iconv (cd_utf8_to_88591,
+                            &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if (res == 0)
+          result |= 1;
+        iconv_close (cd_utf8_to_88591);
+      }
+  }
+  /* Test against Solaris 10 bug: Failures are not distinguishable from
+     successful returns.  */
+  {
+    iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646");
+    if (cd_ascii_to_88591 != (iconv_t)(-1))
+      {
+        static ICONV_CONST char input[] = "\263";
+        char buf[10];
+        ICONV_CONST char *inptr = input;
+        size_t inbytesleft = strlen (input);
+        char *outptr = buf;
+        size_t outbytesleft = sizeof (buf);
+        size_t res = iconv (cd_ascii_to_88591,
+                            &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if (res == 0)
+          result |= 2;
+        iconv_close (cd_ascii_to_88591);
+      }
+  }
+  /* Test against AIX 6.1..7.1 bug: Buffer overrun.  */
+  {
+    iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1");
+    if (cd_88591_to_utf8 != (iconv_t)(-1))
+      {
+        static ICONV_CONST char input[] = "\304";
+        static char buf[2] = { (char)0xDE, (char)0xAD };
+        ICONV_CONST char *inptr = input;
+        size_t inbytesleft = 1;
+        char *outptr = buf;
+        size_t outbytesleft = 1;
+        size_t res = iconv (cd_88591_to_utf8,
+                            &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD)
+          result |= 4;
+        iconv_close (cd_88591_to_utf8);
+      }
+  }
+#if 0 /* This bug could be worked around by the caller.  */
+  /* Test against HP-UX 11.11 bug: Positive return value instead of 0.  */
+  {
+    iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
+    if (cd_88591_to_utf8 != (iconv_t)(-1))
+      {
+        static ICONV_CONST char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337";
+        char buf[50];
+        ICONV_CONST char *inptr = input;
+        size_t inbytesleft = strlen (input);
+        char *outptr = buf;
+        size_t outbytesleft = sizeof (buf);
+        size_t res = iconv (cd_88591_to_utf8,
+                            &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if ((int)res > 0)
+          result |= 8;
+        iconv_close (cd_88591_to_utf8);
+      }
+  }
+#endif
+  /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
+     provided.  */
+  {
+    /* Try standardized names.  */
+    iconv_t cd1 = iconv_open ("UTF-8", "EUC-JP");
+    /* Try IRIX, OSF/1 names.  */
+    iconv_t cd2 = iconv_open ("UTF-8", "eucJP");
+    /* Try AIX names.  */
+    iconv_t cd3 = iconv_open ("UTF-8", "IBM-eucJP");
+    /* Try HP-UX names.  */
+    iconv_t cd4 = iconv_open ("utf8", "eucJP");
+    if (cd1 == (iconv_t)(-1) && cd2 == (iconv_t)(-1)
+        && cd3 == (iconv_t)(-1) && cd4 == (iconv_t)(-1))
+      result |= 16;
+    if (cd1 != (iconv_t)(-1))
+      iconv_close (cd1);
+    if (cd2 != (iconv_t)(-1))
+      iconv_close (cd2);
+    if (cd3 != (iconv_t)(-1))
+      iconv_close (cd3);
+    if (cd4 != (iconv_t)(-1))
+      iconv_close (cd4);
+  }
+  return result;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  am_cv_func_iconv_works=yes
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+        test "$am_cv_func_iconv_works" = no || break
+      done
+      LIBS="$am_save_LIBS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv_works" >&5
+$as_echo "$am_cv_func_iconv_works" >&6; }
+    case "$am_cv_func_iconv_works" in
+      *no) am_func_iconv=no am_cv_lib_iconv=no ;;
+      *)   am_func_iconv=yes ;;
+    esac
+  else
+    am_func_iconv=no am_cv_lib_iconv=no
+  fi
+  if test "$am_func_iconv" = yes; then
+
+$as_echo "#define HAVE_ICONV 1" >>confdefs.h
+
+  fi
+  if test "$am_cv_lib_iconv" = yes; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5
+$as_echo_n "checking how to link with libiconv... " >&6; }
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5
+$as_echo "$LIBICONV" >&6; }
+  else
+            CPPFLAGS="$am_save_CPPFLAGS"
+    LIBICONV=
+    LTLIBICONV=
+  fi
+
+
+
+  if test "$am_cv_func_iconv" = yes; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv declaration" >&5
+$as_echo_n "checking for iconv declaration... " >&6; }
+    if ${am_cv_proto_iconv+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <stdlib.h>
+#include <iconv.h>
+extern
+#ifdef __cplusplus
+"C"
+#endif
+#if defined(__STDC__) || defined(_MSC_VER) || defined(__cplusplus)
+size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
+#else
+size_t iconv();
+#endif
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  am_cv_proto_iconv_arg1=""
+else
+  am_cv_proto_iconv_arg1="const"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+      am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"
+fi
+
+    am_cv_proto_iconv=`echo "$am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result:
+         $am_cv_proto_iconv" >&5
+$as_echo "
+         $am_cv_proto_iconv" >&6; }
+  else
+            am_cv_proto_iconv_arg1=""
+  fi
+
+cat >>confdefs.h <<_ACEOF
+#define ICONV_CONST $am_cv_proto_iconv_arg1
+_ACEOF
+
+
+
+
+
+
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int foo (int a) { a = __builtin_expect (a, 10); return a == 10 ? 0 : 1; }
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+$as_echo "#define HAVE_BUILTIN_EXPECT 1" >>confdefs.h
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+
+  for ac_header in argz.h inttypes.h limits.h unistd.h sys/param.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+  for ac_func in getcwd getegid geteuid getgid getuid mempcpy munmap \
+    stpcpy strcasecmp strdup strtoul tsearch argz_count argz_stringify \
+    argz_next __fsetlocking
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+    for ac_func in localeconv
+do :
+  ac_fn_c_check_func "$LINENO" "localeconv" "ac_cv_func_localeconv"
+if test "x$ac_cv_func_localeconv" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_LOCALECONV 1
+_ACEOF
+
+fi
+done
+
+
+          ac_fn_c_check_decl "$LINENO" "feof_unlocked" "ac_cv_have_decl_feof_unlocked" "#include <stdio.h>
+"
+if test "x$ac_cv_have_decl_feof_unlocked" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_FEOF_UNLOCKED $ac_have_decl
+_ACEOF
+ac_fn_c_check_decl "$LINENO" "fgets_unlocked" "ac_cv_have_decl_fgets_unlocked" "#include <stdio.h>
+"
+if test "x$ac_cv_have_decl_fgets_unlocked" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_FGETS_UNLOCKED $ac_have_decl
+_ACEOF
+
+
+
+
+                    for ac_prog in bison
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_INTLBISON+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$INTLBISON"; then
+  ac_cv_prog_INTLBISON="$INTLBISON" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_INTLBISON="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+INTLBISON=$ac_cv_prog_INTLBISON
+if test -n "$INTLBISON"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLBISON" >&5
+$as_echo "$INTLBISON" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$INTLBISON" && break
+done
+
+  if test -z "$INTLBISON"; then
+    ac_verc_fail=yes
+  else
+        { $as_echo "$as_me:${as_lineno-$LINENO}: checking version of bison" >&5
+$as_echo_n "checking version of bison... " >&6; }
+    ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison.* \([0-9]*\.[0-9.]*\).*$/\1/p'`
+    case $ac_prog_version in
+      '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;
+      2.[7-9]* | [3-9].*)
+         ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;;
+      *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;;
+    esac
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_prog_version" >&5
+$as_echo "$ac_prog_version" >&6; }
+  fi
+  if test $ac_verc_fail = yes; then
+    INTLBISON=:
+  fi
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for long long int" >&5
+$as_echo_n "checking for long long int... " >&6; }
+if ${ac_cv_type_long_long_int+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_type_long_long_int=yes
+      if test "x${ac_cv_prog_cc_c99-no}" = xno; then
+	ac_cv_type_long_long_int=$ac_cv_type_unsigned_long_long_int
+	if test $ac_cv_type_long_long_int = yes; then
+	  	  	  	  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <limits.h>
+		 #ifndef LLONG_MAX
+		 # define HALF \
+			  (1LL << (sizeof (long long int) * CHAR_BIT - 2))
+		 # define LLONG_MAX (HALF - 1 + HALF)
+		 #endif
+int
+main ()
+{
+long long int n = 1;
+		 int i;
+		 for (i = 0; ; i++)
+		   {
+		     long long int m = n << i;
+		     if (m >> i != n)
+		       return 1;
+		     if (LLONG_MAX / 2 < m)
+		       break;
+		   }
+		 return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+  ac_cv_type_long_long_int=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+	fi
+      fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_long_long_int" >&5
+$as_echo "$ac_cv_type_long_long_int" >&6; }
+  if test $ac_cv_type_long_long_int = yes; then
+
+$as_echo "#define HAVE_LONG_LONG_INT 1" >>confdefs.h
+
+  fi
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for wchar_t" >&5
+$as_echo_n "checking for wchar_t... " >&6; }
+if ${gt_cv_c_wchar_t+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stddef.h>
+            wchar_t foo = (wchar_t)'\0';
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gt_cv_c_wchar_t=yes
+else
+  gt_cv_c_wchar_t=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_c_wchar_t" >&5
+$as_echo "$gt_cv_c_wchar_t" >&6; }
+  if test $gt_cv_c_wchar_t = yes; then
+
+$as_echo "#define HAVE_WCHAR_T 1" >>confdefs.h
+
+  fi
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for wint_t" >&5
+$as_echo_n "checking for wint_t... " >&6; }
+if ${gt_cv_c_wint_t+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
+   <wchar.h>.
+   BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be included
+   before <wchar.h>.  */
+#include <stddef.h>
+#include <stdio.h>
+#include <time.h>
+#include <wchar.h>
+            wint_t foo = (wchar_t)'\0';
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gt_cv_c_wint_t=yes
+else
+  gt_cv_c_wint_t=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_c_wint_t" >&5
+$as_echo "$gt_cv_c_wint_t" >&6; }
+  if test $gt_cv_c_wint_t = yes; then
+
+$as_echo "#define HAVE_WINT_T 1" >>confdefs.h
+
+
+            { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether wint_t is too small" >&5
+$as_echo_n "checking whether wint_t is too small... " >&6; }
+if ${gl_cv_type_wint_t_too_small+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
+   <wchar.h>.
+   BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
+   included before <wchar.h>.  */
+#if !(defined __GLIBC__ && !defined __UCLIBC__)
+# include <stddef.h>
+# include <stdio.h>
+# include <time.h>
+#endif
+#include <wchar.h>
+              int verify[sizeof (wint_t) < sizeof (int) ? -1 : 1];
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gl_cv_type_wint_t_too_small=no
+else
+  gl_cv_type_wint_t_too_small=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_type_wint_t_too_small" >&5
+$as_echo "$gl_cv_type_wint_t_too_small" >&6; }
+    if test $gl_cv_type_wint_t_too_small = yes; then
+      GNULIB_OVERRIDES_WINT_T=1
+    else
+      GNULIB_OVERRIDES_WINT_T=0
+    fi
+  else
+    GNULIB_OVERRIDES_WINT_T=0
+  fi
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for intmax_t" >&5
+$as_echo_n "checking for intmax_t... " >&6; }
+if ${gt_cv_c_intmax_t+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <stddef.h>
+#include <stdlib.h>
+#if HAVE_STDINT_H_WITH_UINTMAX
+#include <stdint.h>
+#endif
+#if HAVE_INTTYPES_H_WITH_UINTMAX
+#include <inttypes.h>
+#endif
+
+int
+main ()
+{
+intmax_t x = -1;
+            return !x;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gt_cv_c_intmax_t=yes
+else
+  gt_cv_c_intmax_t=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_c_intmax_t" >&5
+$as_echo "$gt_cv_c_intmax_t" >&6; }
+  if test $gt_cv_c_intmax_t = yes; then
+
+$as_echo "#define HAVE_INTMAX_T 1" >>confdefs.h
+
+  fi
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether printf() supports POSIX/XSI format strings" >&5
+$as_echo_n "checking whether printf() supports POSIX/XSI format strings... " >&6; }
+if ${gt_cv_func_printf_posix+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+      if test "$cross_compiling" = yes; then :
+
+          cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#if defined __NetBSD__ || defined __BEOS__ || defined _MSC_VER || defined __MINGW32__ || defined __CYGWIN__
+  notposix
+#endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "notposix" >/dev/null 2>&1; then :
+  gt_cv_func_printf_posix="guessing no"
+else
+  gt_cv_func_printf_posix="guessing yes"
+fi
+rm -f conftest*
+
+
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <stdio.h>
+#include <string.h>
+/* The string "%2$d %1$d", with dollar characters protected from the shell's
+   dollar expansion (possibly an autoconf bug).  */
+static char format[] = { '%', '2', '$', 'd', ' ', '%', '1', '$', 'd', '\0' };
+static char buf[100];
+int main ()
+{
+  sprintf (buf, format, 33, 55);
+  return (strcmp (buf, "55 33") != 0);
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  gt_cv_func_printf_posix=yes
+else
+  gt_cv_func_printf_posix=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_printf_posix" >&5
+$as_echo "$gt_cv_func_printf_posix" >&6; }
+  case $gt_cv_func_printf_posix in
+    *yes)
+
+$as_echo "#define HAVE_POSIX_PRINTF 1" >>confdefs.h
+
+      ;;
+  esac
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C Library >= 2.1 or uClibc" >&5
+$as_echo_n "checking whether we are using the GNU C Library >= 2.1 or uClibc... " >&6; }
+if ${ac_cv_gnu_library_2_1+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <features.h>
+#ifdef __GNU_LIBRARY__
+ #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2)
+  Lucky GNU user
+ #endif
+#endif
+#ifdef __UCLIBC__
+ Lucky user
+#endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "Lucky" >/dev/null 2>&1; then :
+  ac_cv_gnu_library_2_1=yes
+else
+  ac_cv_gnu_library_2_1=no
+fi
+rm -f conftest*
+
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_gnu_library_2_1" >&5
+$as_echo "$ac_cv_gnu_library_2_1" >&6; }
+
+    GLIBC21="$ac_cv_gnu_library_2_1"
+
+
+
+  for ac_header in stdint.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "stdint.h" "ac_cv_header_stdint_h" "$ac_includes_default"
+if test "x$ac_cv_header_stdint_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_STDINT_H 1
+_ACEOF
+
+fi
+
+done
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for SIZE_MAX" >&5
+$as_echo_n "checking for SIZE_MAX... " >&6; }
+if ${gl_cv_size_max+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    gl_cv_size_max=
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <limits.h>
+#if HAVE_STDINT_H
+#include <stdint.h>
+#endif
+#ifdef SIZE_MAX
+Found it
+#endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "Found it" >/dev/null 2>&1; then :
+  gl_cv_size_max=yes
+fi
+rm -f conftest*
+
+    if test -z "$gl_cv_size_max"; then
+                        if ac_fn_c_compute_int "$LINENO" "sizeof (size_t) * CHAR_BIT - 1" "size_t_bits_minus_1"        "#include <stddef.h>
+#include <limits.h>"; then :
+
+else
+  size_t_bits_minus_1=
+fi
+
+      if ac_fn_c_compute_int "$LINENO" "sizeof (size_t) <= sizeof (unsigned int)" "fits_in_uint"        "#include <stddef.h>"; then :
+
+else
+  fits_in_uint=
+fi
+
+      if test -n "$size_t_bits_minus_1" && test -n "$fits_in_uint"; then
+        if test $fits_in_uint = 1; then
+                              cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stddef.h>
+                 extern size_t foo;
+                 extern unsigned long foo;
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  fits_in_uint=0
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+        fi
+                                if test $fits_in_uint = 1; then
+          gl_cv_size_max="(((1U << $size_t_bits_minus_1) - 1) * 2 + 1)"
+        else
+          gl_cv_size_max="(((1UL << $size_t_bits_minus_1) - 1) * 2 + 1)"
+        fi
+      else
+                gl_cv_size_max='((size_t)~(size_t)0)'
+      fi
+    fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_size_max" >&5
+$as_echo "$gl_cv_size_max" >&6; }
+  if test "$gl_cv_size_max" != yes; then
+
+cat >>confdefs.h <<_ACEOF
+#define SIZE_MAX $gl_cv_size_max
+_ACEOF
+
+  fi
+
+
+
+
+  for ac_header in stdint.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "stdint.h" "ac_cv_header_stdint_h" "$ac_includes_default"
+if test "x$ac_cv_header_stdint_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_STDINT_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+  for ac_func in $ac_func_list
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working fcntl.h" >&5
+$as_echo_n "checking for working fcntl.h... " >&6; }
+if ${gl_cv_header_working_fcntl_h+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  case "$host_os" in
+                  # Guess 'no' on native Windows.
+          mingw*) gl_cv_header_working_fcntl_h='no' ;;
+          *)      gl_cv_header_working_fcntl_h=cross-compiling ;;
+        esac
+
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+           #include <sys/stat.h>
+           #if HAVE_UNISTD_H
+           # include <unistd.h>
+           #else /* on Windows with MSVC */
+           # include <io.h>
+           # include <stdlib.h>
+           # defined sleep(n) _sleep ((n) * 1000)
+           #endif
+           #include <fcntl.h>
+           #ifndef O_NOATIME
+            #define O_NOATIME 0
+           #endif
+           #ifndef O_NOFOLLOW
+            #define O_NOFOLLOW 0
+           #endif
+           static int const constants[] =
+            {
+              O_CREAT, O_EXCL, O_NOCTTY, O_TRUNC, O_APPEND,
+              O_NONBLOCK, O_SYNC, O_ACCMODE, O_RDONLY, O_RDWR, O_WRONLY
+            };
+
+int
+main ()
+{
+
+            int result = !constants;
+            #if HAVE_SYMLINK
+            {
+              static char const sym[] = "conftest.sym";
+              if (symlink ("/dev/null", sym) != 0)
+                result |= 2;
+              else
+                {
+                  int fd = open (sym, O_WRONLY | O_NOFOLLOW | O_CREAT, 0);
+                  if (fd >= 0)
+                    {
+                      close (fd);
+                      result |= 4;
+                    }
+                }
+              if (unlink (sym) != 0 || symlink (".", sym) != 0)
+                result |= 2;
+              else
+                {
+                  int fd = open (sym, O_RDONLY | O_NOFOLLOW);
+                  if (fd >= 0)
+                    {
+                      close (fd);
+                      result |= 4;
+                    }
+                }
+              unlink (sym);
+            }
+            #endif
+            {
+              static char const file[] = "confdefs.h";
+              int fd = open (file, O_RDONLY | O_NOATIME);
+              if (fd < 0)
+                result |= 8;
+              else
+                {
+                  struct stat st0;
+                  if (fstat (fd, &st0) != 0)
+                    result |= 16;
+                  else
+                    {
+                      char c;
+                      sleep (1);
+                      if (read (fd, &c, 1) != 1)
+                        result |= 24;
+                      else
+                        {
+                          if (close (fd) != 0)
+                            result |= 32;
+                          else
+                            {
+                              struct stat st1;
+                              if (stat (file, &st1) != 0)
+                                result |= 40;
+                              else
+                                if (st0.st_atime != st1.st_atime)
+                                  result |= 64;
+                            }
+                        }
+                    }
+                }
+            }
+            return result;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  gl_cv_header_working_fcntl_h=yes
+else
+  case $? in #(
+        4) gl_cv_header_working_fcntl_h='no (bad O_NOFOLLOW)';; #(
+        64) gl_cv_header_working_fcntl_h='no (bad O_NOATIME)';; #(
+        68) gl_cv_header_working_fcntl_h='no (bad O_NOATIME, O_NOFOLLOW)';; #(
+         *) gl_cv_header_working_fcntl_h='no';;
+        esac
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_header_working_fcntl_h" >&5
+$as_echo "$gl_cv_header_working_fcntl_h" >&6; }
+
+  case $gl_cv_header_working_fcntl_h in #(
+  *O_NOATIME* | no | cross-compiling) ac_val=0;; #(
+  *) ac_val=1;;
+  esac
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_WORKING_O_NOATIME $ac_val
+_ACEOF
+
+
+  case $gl_cv_header_working_fcntl_h in #(
+  *O_NOFOLLOW* | no | cross-compiling) ac_val=0;; #(
+  *) ac_val=1;;
+  esac
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_WORKING_O_NOFOLLOW $ac_val
+_ACEOF
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+      if test $ac_cv_func_uselocale = yes; then
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether uselocale works" >&5
+$as_echo_n "checking whether uselocale works... " >&6; }
+if ${gt_cv_func_uselocale_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  # Guess no on AIX, yes otherwise.
+          case "$host_os" in
+            aix*) gt_cv_func_uselocale_works="guessing no" ;;
+            *)    gt_cv_func_uselocale_works="guessing yes" ;;
+          esac
+
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <locale.h>
+#if HAVE_XLOCALE_H
+# include <xlocale.h>
+#endif
+int main ()
+{
+  uselocale (NULL);
+  setlocale (LC_ALL, "en_US.UTF-8");
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  gt_cv_func_uselocale_works=yes
+else
+  gt_cv_func_uselocale_works=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_uselocale_works" >&5
+$as_echo "$gt_cv_func_uselocale_works" >&6; }
+  else
+    gt_cv_func_uselocale_works=no
+  fi
+  case "$gt_cv_func_uselocale_works" in
+    *yes)
+
+$as_echo "#define HAVE_WORKING_USELOCALE 1" >>confdefs.h
+
+      ;;
+  esac
+
+
+                            case "$gt_cv_func_uselocale_works" in
+    *yes)
+
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking for fake locale system (OpenBSD)" >&5
+$as_echo_n "checking for fake locale system (OpenBSD)... " >&6; }
+if ${gt_cv_locale_fake+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+              case "$host_os" in
+              openbsd*) gt_cv_locale_fake="guessing yes" ;;
+              *)        gt_cv_locale_fake="guessing no" ;;
+            esac
+
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <locale.h>
+#if HAVE_XLOCALE_H
+# include <xlocale.h>
+#endif
+int main ()
+{
+  locale_t loc1, loc2;
+  if (setlocale (LC_ALL, "de_DE.UTF-8") == NULL) return 1;
+  if (setlocale (LC_ALL, "fr_FR.UTF-8") == NULL) return 1;
+  loc1 = newlocale (LC_ALL_MASK, "de_DE.UTF-8", (locale_t)0);
+  loc2 = newlocale (LC_ALL_MASK, "fr_FR.UTF-8", (locale_t)0);
+  return !(loc1 == loc2);
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  gt_cv_locale_fake=yes
+else
+  gt_cv_locale_fake=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_locale_fake" >&5
+$as_echo "$gt_cv_locale_fake" >&6; }
+      ;;
+    *) gt_cv_locale_fake=no ;;
+  esac
+  case "$gt_cv_locale_fake" in
+    *yes)
+
+$as_echo "#define HAVE_FAKE_LOCALES 1" >>confdefs.h
+
+      ;;
+  esac
+
+  case "$gt_cv_func_uselocale_works" in
+    *yes)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Solaris 11.4 locale system" >&5
+$as_echo_n "checking for Solaris 11.4 locale system... " >&6; }
+if ${gt_cv_locale_solaris114+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case "$host_os" in
+           solaris*)
+                                                                                           cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+                  #include <locale.h>
+                  struct _LC_locale_t *x;
+                  locale_t y;
+
+int
+main ()
+{
+*y = x;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gt_cv_locale_solaris114=yes
+else
+  gt_cv_locale_solaris114=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+             ;;
+           *) gt_cv_locale_solaris114=no ;;
+         esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_locale_solaris114" >&5
+$as_echo "$gt_cv_locale_solaris114" >&6; }
+      ;;
+    *) gt_cv_locale_solaris114=no ;;
+  esac
+  if test $gt_cv_locale_solaris114 = yes; then
+
+$as_echo "#define HAVE_SOLARIS114_LOCALES 1" >>confdefs.h
+
+  fi
+
+        case "$gt_cv_func_uselocale_works" in
+    *yes)
+      for ac_func in getlocalename_l
+do :
+  ac_fn_c_check_func "$LINENO" "getlocalename_l" "ac_cv_func_getlocalename_l"
+if test "x$ac_cv_func_getlocalename_l" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_GETLOCALENAME_L 1
+_ACEOF
+
+fi
+done
+
+      ;;
+  esac
+
+              gt_nameless_locales=no
+  if false; then
+    gt_nameless_locales=yes
+
+$as_echo "#define HAVE_NAMELESS_LOCALES 1" >>confdefs.h
+
+  fi
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFPreferencesCopyAppValue" >&5
+$as_echo_n "checking for CFPreferencesCopyAppValue... " >&6; }
+if ${gt_cv_func_CFPreferencesCopyAppValue+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  gt_save_LIBS="$LIBS"
+     LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <CoreFoundation/CFPreferences.h>
+int
+main ()
+{
+CFPreferencesCopyAppValue(NULL, NULL)
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  gt_cv_func_CFPreferencesCopyAppValue=yes
+else
+  gt_cv_func_CFPreferencesCopyAppValue=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     LIBS="$gt_save_LIBS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5
+$as_echo "$gt_cv_func_CFPreferencesCopyAppValue" >&6; }
+  if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
+
+$as_echo "#define HAVE_CFPREFERENCESCOPYAPPVALUE 1" >>confdefs.h
+
+  fi
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyCurrent" >&5
+$as_echo_n "checking for CFLocaleCopyCurrent... " >&6; }
+if ${gt_cv_func_CFLocaleCopyCurrent+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  gt_save_LIBS="$LIBS"
+     LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <CoreFoundation/CFLocale.h>
+int
+main ()
+{
+CFLocaleCopyCurrent();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  gt_cv_func_CFLocaleCopyCurrent=yes
+else
+  gt_cv_func_CFLocaleCopyCurrent=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     LIBS="$gt_save_LIBS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyCurrent" >&5
+$as_echo "$gt_cv_func_CFLocaleCopyCurrent" >&6; }
+  if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+
+$as_echo "#define HAVE_CFLOCALECOPYCURRENT 1" >>confdefs.h
+
+  fi
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyPreferredLanguages" >&5
+$as_echo_n "checking for CFLocaleCopyPreferredLanguages... " >&6; }
+if ${gt_cv_func_CFLocaleCopyPreferredLanguages+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  gt_save_LIBS="$LIBS"
+     LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <CoreFoundation/CFLocale.h>
+int
+main ()
+{
+CFLocaleCopyPreferredLanguages();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  gt_cv_func_CFLocaleCopyPreferredLanguages=yes
+else
+  gt_cv_func_CFLocaleCopyPreferredLanguages=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     LIBS="$gt_save_LIBS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyPreferredLanguages" >&5
+$as_echo "$gt_cv_func_CFLocaleCopyPreferredLanguages" >&6; }
+  if test $gt_cv_func_CFLocaleCopyPreferredLanguages = yes; then
+
+$as_echo "#define HAVE_CFLOCALECOPYPREFERREDLANGUAGES 1" >>confdefs.h
+
+  fi
+  INTL_MACOSX_LIBS=
+  if test $gt_cv_func_CFPreferencesCopyAppValue = yes \
+     || test $gt_cv_func_CFLocaleCopyCurrent = yes \
+     || test $gt_cv_func_CFLocaleCopyPreferredLanguages = yes; then
+    INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
+  fi
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for flexible array members" >&5
+$as_echo_n "checking for flexible array members... " >&6; }
+if ${ac_cv_c_flexmember+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+	    #include <stdio.h>
+	    #include <stddef.h>
+	    struct s { int n; double d[]; };
+int
+main ()
+{
+int m = getchar ();
+	    struct s *p = malloc (offsetof (struct s, d)
+				  + m * sizeof (double));
+	    p->d[0] = 0.0;
+	    return p->d != (double *) NULL;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_c_flexmember=yes
+else
+  ac_cv_c_flexmember=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_flexmember" >&5
+$as_echo "$ac_cv_c_flexmember" >&6; }
+  if test $ac_cv_c_flexmember = yes; then
+
+$as_echo "#define FLEXIBLE_ARRAY_MEMBER /**/" >>confdefs.h
+
+  else
+    $as_echo "#define FLEXIBLE_ARRAY_MEMBER 1" >>confdefs.h
+
+  fi
+
+
+
+
+
+
+
+
+               if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AR="${ac_tool_prefix}ar"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AR"; then
+  ac_ct_AR=$AR
+  # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_AR="ar"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_AR" = x; then
+    AR="ar"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+else
+  AR="$ac_cv_prog_AR"
+fi
+
+     if test -z "$ARFLAGS"; then
+       ARFLAGS='cr'
+     fi
+
+
+
+
+    case "$enable_silent_rules" in
+    yes) INTL_DEFAULT_VERBOSITY=0;;
+    no)  INTL_DEFAULT_VERBOSITY=1;;
+    *)   INTL_DEFAULT_VERBOSITY=1;;
+  esac
+
+
+  ac_fn_c_check_type "$LINENO" "ptrdiff_t" "ac_cv_type_ptrdiff_t" "$ac_includes_default"
+if test "x$ac_cv_type_ptrdiff_t" = xyes; then :
+
+else
+
+$as_echo "#define ptrdiff_t long" >>confdefs.h
+
+
+fi
+
+  for ac_header in features.h stddef.h stdlib.h string.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+  for ac_func in asprintf fwprintf newlocale putenv setenv setlocale \
+    snprintf strnlen uselocale wcslen wcsnlen mbrtowc wcrtomb
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+      ac_fn_c_check_decl "$LINENO" "_snprintf" "ac_cv_have_decl__snprintf" "#include <stdio.h>
+"
+if test "x$ac_cv_have_decl__snprintf" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL__SNPRINTF $ac_have_decl
+_ACEOF
+ac_fn_c_check_decl "$LINENO" "_snwprintf" "ac_cv_have_decl__snwprintf" "#include <stdio.h>
+"
+if test "x$ac_cv_have_decl__snwprintf" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL__SNWPRINTF $ac_have_decl
+_ACEOF
+
+
+          ac_fn_c_check_decl "$LINENO" "getc_unlocked" "ac_cv_have_decl_getc_unlocked" "#include <stdio.h>
+"
+if test "x$ac_cv_have_decl_getc_unlocked" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_GETC_UNLOCKED $ac_have_decl
+_ACEOF
+
+
+  case $gt_cv_func_printf_posix in
+    *yes) HAVE_POSIX_PRINTF=1 ;;
+    *) HAVE_POSIX_PRINTF=0 ;;
+  esac
+
+  if test "$ac_cv_func_asprintf" = yes; then
+    HAVE_ASPRINTF=1
+  else
+    HAVE_ASPRINTF=0
+  fi
+
+  if test "$ac_cv_func_snprintf" = yes; then
+    HAVE_SNPRINTF=1
+  else
+    HAVE_SNPRINTF=0
+  fi
+
+  if test "$ac_cv_func_newlocale" = yes; then
+    HAVE_NEWLOCALE=1
+  else
+    HAVE_NEWLOCALE=0
+  fi
+
+  if test "$ac_cv_func_wprintf" = yes; then
+    HAVE_WPRINTF=1
+  else
+    HAVE_WPRINTF=0
+  fi
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for nl_langinfo and CODESET" >&5
+$as_echo_n "checking for nl_langinfo and CODESET... " >&6; }
+if ${am_cv_langinfo_codeset+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <langinfo.h>
+int
+main ()
+{
+char* cs = nl_langinfo(CODESET); return !cs;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  am_cv_langinfo_codeset=yes
+else
+  am_cv_langinfo_codeset=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_langinfo_codeset" >&5
+$as_echo "$am_cv_langinfo_codeset" >&6; }
+  if test $am_cv_langinfo_codeset = yes; then
+
+$as_echo "#define HAVE_LANGINFO_CODESET 1" >>confdefs.h
+
+  fi
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for LC_MESSAGES" >&5
+$as_echo_n "checking for LC_MESSAGES... " >&6; }
+if ${gt_cv_val_LC_MESSAGES+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <locale.h>
+int
+main ()
+{
+return LC_MESSAGES
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  gt_cv_val_LC_MESSAGES=yes
+else
+  gt_cv_val_LC_MESSAGES=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_val_LC_MESSAGES" >&5
+$as_echo "$gt_cv_val_LC_MESSAGES" >&6; }
+  if test $gt_cv_val_LC_MESSAGES = yes; then
+
+$as_echo "#define HAVE_LC_MESSAGES 1" >>confdefs.h
+
+  fi
+
+
+  if test $gt_nameless_locales = yes; then
+    HAVE_NAMELESS_LOCALES=1
+  else
+    HAVE_NAMELESS_LOCALES=0
+  fi
+
+
+                if test "$enable_shared" = yes; then
+    case "$host_os" in
+      mingw* | cygwin*) is_woe32dll=yes ;;
+      *) is_woe32dll=no ;;
+    esac
+  else
+    is_woe32dll=no
+  fi
+  WOE32DLL=$is_woe32dll
+
+
+      case "$host_os" in
+    mingw* | cygwin*) is_woe32=yes ;;
+    *) is_woe32=no ;;
+  esac
+  WOE32=$is_woe32
+
+  if test $WOE32 = yes; then
+        if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}windres", so it can be a program name with args.
+set dummy ${ac_tool_prefix}windres; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_WINDRES+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$WINDRES"; then
+  ac_cv_prog_WINDRES="$WINDRES" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_WINDRES="${ac_tool_prefix}windres"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+WINDRES=$ac_cv_prog_WINDRES
+if test -n "$WINDRES"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $WINDRES" >&5
+$as_echo "$WINDRES" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_WINDRES"; then
+  ac_ct_WINDRES=$WINDRES
+  # Extract the first word of "windres", so it can be a program name with args.
+set dummy windres; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_WINDRES+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_WINDRES"; then
+  ac_cv_prog_ac_ct_WINDRES="$ac_ct_WINDRES" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_WINDRES="windres"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_WINDRES=$ac_cv_prog_ac_ct_WINDRES
+if test -n "$ac_ct_WINDRES"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_WINDRES" >&5
+$as_echo "$ac_ct_WINDRES" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_WINDRES" = x; then
+    WINDRES=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    WINDRES=$ac_ct_WINDRES
+  fi
+else
+  WINDRES="$ac_cv_prog_WINDRES"
+fi
+
+  fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFPreferencesCopyAppValue" >&5
+$as_echo_n "checking for CFPreferencesCopyAppValue... " >&6; }
+if ${gt_cv_func_CFPreferencesCopyAppValue+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  gt_save_LIBS="$LIBS"
+     LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <CoreFoundation/CFPreferences.h>
+int
+main ()
+{
+CFPreferencesCopyAppValue(NULL, NULL)
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  gt_cv_func_CFPreferencesCopyAppValue=yes
+else
+  gt_cv_func_CFPreferencesCopyAppValue=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     LIBS="$gt_save_LIBS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5
+$as_echo "$gt_cv_func_CFPreferencesCopyAppValue" >&6; }
+  if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
+
+$as_echo "#define HAVE_CFPREFERENCESCOPYAPPVALUE 1" >>confdefs.h
+
+  fi
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyCurrent" >&5
+$as_echo_n "checking for CFLocaleCopyCurrent... " >&6; }
+if ${gt_cv_func_CFLocaleCopyCurrent+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  gt_save_LIBS="$LIBS"
+     LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <CoreFoundation/CFLocale.h>
+int
+main ()
+{
+CFLocaleCopyCurrent();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  gt_cv_func_CFLocaleCopyCurrent=yes
+else
+  gt_cv_func_CFLocaleCopyCurrent=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     LIBS="$gt_save_LIBS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyCurrent" >&5
+$as_echo "$gt_cv_func_CFLocaleCopyCurrent" >&6; }
+  if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+
+$as_echo "#define HAVE_CFLOCALECOPYCURRENT 1" >>confdefs.h
+
+  fi
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyPreferredLanguages" >&5
+$as_echo_n "checking for CFLocaleCopyPreferredLanguages... " >&6; }
+if ${gt_cv_func_CFLocaleCopyPreferredLanguages+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  gt_save_LIBS="$LIBS"
+     LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <CoreFoundation/CFLocale.h>
+int
+main ()
+{
+CFLocaleCopyPreferredLanguages();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  gt_cv_func_CFLocaleCopyPreferredLanguages=yes
+else
+  gt_cv_func_CFLocaleCopyPreferredLanguages=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     LIBS="$gt_save_LIBS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyPreferredLanguages" >&5
+$as_echo "$gt_cv_func_CFLocaleCopyPreferredLanguages" >&6; }
+  if test $gt_cv_func_CFLocaleCopyPreferredLanguages = yes; then
+
+$as_echo "#define HAVE_CFLOCALECOPYPREFERREDLANGUAGES 1" >>confdefs.h
+
+  fi
+  INTL_MACOSX_LIBS=
+  if test $gt_cv_func_CFPreferencesCopyAppValue = yes \
+     || test $gt_cv_func_CFLocaleCopyCurrent = yes \
+     || test $gt_cv_func_CFLocaleCopyPreferredLanguages = yes; then
+    INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
+  fi
+
+
+
+
+
+
+    BUILD_INCLUDED_LIBINTL=no
+    USE_INCLUDED_LIBINTL=no
+
+  LIBINTL=
+  LTLIBINTL=
+  POSUB=
+
+    case " $gt_needs " in
+    *" need-formatstring-macros "*) gt_api_version=3 ;;
+    *" need-ngettext "*) gt_api_version=2 ;;
+    *) gt_api_version=1 ;;
+  esac
+  gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc"
+  gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl"
+
+    if test "$USE_NLS" = "yes"; then
+    gt_use_preinstalled_gnugettext=no
+
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether included gettext is requested" >&5
+$as_echo_n "checking whether included gettext is requested... " >&6; }
+
+# Check whether --with-included-gettext was given.
+if test "${with_included_gettext+set}" = set; then :
+  withval=$with_included_gettext; nls_cv_force_use_gnu_gettext=$withval
+else
+  nls_cv_force_use_gnu_gettext=no
+fi
+
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: $nls_cv_force_use_gnu_gettext" >&5
+$as_echo "$nls_cv_force_use_gnu_gettext" >&6; }
+
+      nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+      if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+
+
+        if test $gt_api_version -ge 3; then
+          gt_revision_test_code='
+#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+'
+        else
+          gt_revision_test_code=
+        fi
+        if test $gt_api_version -ge 2; then
+          gt_expression_test_code=' + * ngettext ("", "", 0)'
+        else
+          gt_expression_test_code=
+        fi
+
+        { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libc" >&5
+$as_echo_n "checking for GNU gettext in libc... " >&6; }
+if eval \${$gt_func_gnugettext_libc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <libintl.h>
+#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+extern int _nl_msg_cat_cntr;
+extern int *_nl_domain_bindings;
+#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_domain_bindings)
+#else
+#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0
+#endif
+$gt_revision_test_code
+
+int
+main ()
+{
+
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$gt_func_gnugettext_libc=yes"
+else
+  eval "$gt_func_gnugettext_libc=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$gt_func_gnugettext_libc
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+
+        if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
+
+
+
+
+
+
+
+    use_additional=yes
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+
+    eval additional_includedir=\"$includedir\"
+    eval additional_libdir=\"$libdir\"
+
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+
+# Check whether --with-libintl-prefix was given.
+if test "${with_libintl_prefix+set}" = set; then :
+  withval=$with_libintl_prefix;
+    if test "X$withval" = "Xno"; then
+      use_additional=no
+    else
+      if test "X$withval" = "X"; then
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+
+          eval additional_includedir=\"$includedir\"
+          eval additional_libdir=\"$libdir\"
+
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+      else
+        additional_includedir="$withval/include"
+        additional_libdir="$withval/$acl_libdirstem"
+        if test "$acl_libdirstem2" != "$acl_libdirstem" \
+           && test ! -d "$withval/$acl_libdirstem"; then
+          additional_libdir="$withval/$acl_libdirstem2"
+        fi
+      fi
+    fi
+
+fi
+
+      LIBINTL=
+  LTLIBINTL=
+  INCINTL=
+  LIBINTL_PREFIX=
+      HAVE_LIBINTL=
+  rpathdirs=
+  ltrpathdirs=
+  names_already_handled=
+  names_next_round='intl '
+  while test -n "$names_next_round"; do
+    names_this_round="$names_next_round"
+    names_next_round=
+    for name in $names_this_round; do
+      already_handled=
+      for n in $names_already_handled; do
+        if test "$n" = "$name"; then
+          already_handled=yes
+          break
+        fi
+      done
+      if test -z "$already_handled"; then
+        names_already_handled="$names_already_handled $name"
+                        uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'`
+        eval value=\"\$HAVE_LIB$uppername\"
+        if test -n "$value"; then
+          if test "$value" = yes; then
+            eval value=\"\$LIB$uppername\"
+            test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value"
+            eval value=\"\$LTLIB$uppername\"
+            test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value"
+          else
+                                    :
+          fi
+        else
+                              found_dir=
+          found_la=
+          found_so=
+          found_a=
+          eval libname=\"$acl_libname_spec\"    # typically: libname=lib$name
+          if test -n "$acl_shlibext"; then
+            shrext=".$acl_shlibext"             # typically: shrext=.so
+          else
+            shrext=
+          fi
+          if test $use_additional = yes; then
+            dir="$additional_libdir"
+                                    if test -n "$acl_shlibext"; then
+              if test -f "$dir/$libname$shrext"; then
+                found_dir="$dir"
+                found_so="$dir/$libname$shrext"
+              else
+                if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                  ver=`(cd "$dir" && \
+                        for f in "$libname$shrext".*; do echo "$f"; done \
+                        | sed -e "s,^$libname$shrext\\\\.,," \
+                        | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                        | sed 1q ) 2>/dev/null`
+                  if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                    found_dir="$dir"
+                    found_so="$dir/$libname$shrext.$ver"
+                  fi
+                else
+                  eval library_names=\"$acl_library_names_spec\"
+                  for f in $library_names; do
+                    if test -f "$dir/$f"; then
+                      found_dir="$dir"
+                      found_so="$dir/$f"
+                      break
+                    fi
+                  done
+                fi
+              fi
+            fi
+                        if test "X$found_dir" = "X"; then
+              if test -f "$dir/$libname.$acl_libext"; then
+                found_dir="$dir"
+                found_a="$dir/$libname.$acl_libext"
+              fi
+            fi
+            if test "X$found_dir" != "X"; then
+              if test -f "$dir/$libname.la"; then
+                found_la="$dir/$libname.la"
+              fi
+            fi
+          fi
+          if test "X$found_dir" = "X"; then
+            for x in $LDFLAGS $LTLIBINTL; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+              case "$x" in
+                -L*)
+                  dir=`echo "X$x" | sed -e 's/^X-L//'`
+                                    if test -n "$acl_shlibext"; then
+                    if test -f "$dir/$libname$shrext"; then
+                      found_dir="$dir"
+                      found_so="$dir/$libname$shrext"
+                    else
+                      if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                        ver=`(cd "$dir" && \
+                              for f in "$libname$shrext".*; do echo "$f"; done \
+                              | sed -e "s,^$libname$shrext\\\\.,," \
+                              | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                              | sed 1q ) 2>/dev/null`
+                        if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                          found_dir="$dir"
+                          found_so="$dir/$libname$shrext.$ver"
+                        fi
+                      else
+                        eval library_names=\"$acl_library_names_spec\"
+                        for f in $library_names; do
+                          if test -f "$dir/$f"; then
+                            found_dir="$dir"
+                            found_so="$dir/$f"
+                            break
+                          fi
+                        done
+                      fi
+                    fi
+                  fi
+                                    if test "X$found_dir" = "X"; then
+                    if test -f "$dir/$libname.$acl_libext"; then
+                      found_dir="$dir"
+                      found_a="$dir/$libname.$acl_libext"
+                    fi
+                  fi
+                  if test "X$found_dir" != "X"; then
+                    if test -f "$dir/$libname.la"; then
+                      found_la="$dir/$libname.la"
+                    fi
+                  fi
+                  ;;
+              esac
+              if test "X$found_dir" != "X"; then
+                break
+              fi
+            done
+          fi
+          if test "X$found_dir" != "X"; then
+                        LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name"
+            if test "X$found_so" != "X"; then
+                                                        if test "$enable_rpath" = no \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem" \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
+                                LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+              else
+                                                                                haveit=
+                for x in $ltrpathdirs; do
+                  if test "X$x" = "X$found_dir"; then
+                    haveit=yes
+                    break
+                  fi
+                done
+                if test -z "$haveit"; then
+                  ltrpathdirs="$ltrpathdirs $found_dir"
+                fi
+                                if test "$acl_hardcode_direct" = yes; then
+                                                      LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+                else
+                  if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+                                                            LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+                                                            haveit=
+                    for x in $rpathdirs; do
+                      if test "X$x" = "X$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      rpathdirs="$rpathdirs $found_dir"
+                    fi
+                  else
+                                                                                haveit=
+                    for x in $LDFLAGS $LIBINTL; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                      if test "X$x" = "X-L$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir"
+                    fi
+                    if test "$acl_hardcode_minus_L" != no; then
+                                                                                        LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+                    else
+                                                                                                                                                                                LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
+                    fi
+                  fi
+                fi
+              fi
+            else
+              if test "X$found_a" != "X"; then
+                                LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a"
+              else
+                                                LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name"
+              fi
+            fi
+                        additional_includedir=
+            case "$found_dir" in
+              */$acl_libdirstem | */$acl_libdirstem/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
+                if test "$name" = 'intl'; then
+                  LIBINTL_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+              */$acl_libdirstem2 | */$acl_libdirstem2/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
+                if test "$name" = 'intl'; then
+                  LIBINTL_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+            esac
+            if test "X$additional_includedir" != "X"; then
+                                                                                                                if test "X$additional_includedir" != "X/usr/include"; then
+                haveit=
+                if test "X$additional_includedir" = "X/usr/local/include"; then
+                  if test -n "$GCC"; then
+                    case $host_os in
+                      linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                    esac
+                  fi
+                fi
+                if test -z "$haveit"; then
+                  for x in $CPPFLAGS $INCINTL; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                    if test "X$x" = "X-I$additional_includedir"; then
+                      haveit=yes
+                      break
+                    fi
+                  done
+                  if test -z "$haveit"; then
+                    if test -d "$additional_includedir"; then
+                                            INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir"
+                    fi
+                  fi
+                fi
+              fi
+            fi
+                        if test -n "$found_la"; then
+                                                        save_libdir="$libdir"
+              case "$found_la" in
+                */* | *\\*) . "$found_la" ;;
+                *) . "./$found_la" ;;
+              esac
+              libdir="$save_libdir"
+                            for dep in $dependency_libs; do
+                case "$dep" in
+                  -L*)
+                    additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+                                                                                                                                                                if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
+                       && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
+                      haveit=
+                      if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
+                         || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
+                        if test -n "$GCC"; then
+                          case $host_os in
+                            linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                          esac
+                        fi
+                      fi
+                      if test -z "$haveit"; then
+                        haveit=
+                        for x in $LDFLAGS $LIBINTL; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                                                        LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir"
+                          fi
+                        fi
+                        haveit=
+                        for x in $LDFLAGS $LTLIBINTL; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                                                        LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir"
+                          fi
+                        fi
+                      fi
+                    fi
+                    ;;
+                  -R*)
+                    dir=`echo "X$dep" | sed -e 's/^X-R//'`
+                    if test "$enable_rpath" != no; then
+                                                                  haveit=
+                      for x in $rpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        rpathdirs="$rpathdirs $dir"
+                      fi
+                                                                  haveit=
+                      for x in $ltrpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        ltrpathdirs="$ltrpathdirs $dir"
+                      fi
+                    fi
+                    ;;
+                  -l*)
+                                        names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+                    ;;
+                  *.la)
+                                                                                names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+                    ;;
+                  *)
+                                        LIBINTL="${LIBINTL}${LIBINTL:+ }$dep"
+                    LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep"
+                    ;;
+                esac
+              done
+            fi
+          else
+                                                            LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
+            LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name"
+          fi
+        fi
+      fi
+    done
+  done
+  if test "X$rpathdirs" != "X"; then
+    if test -n "$acl_hardcode_libdir_separator"; then
+                        alldirs=
+      for found_dir in $rpathdirs; do
+        alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
+      done
+            acl_save_libdir="$libdir"
+      libdir="$alldirs"
+      eval flag=\"$acl_hardcode_libdir_flag_spec\"
+      libdir="$acl_save_libdir"
+      LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
+    else
+            for found_dir in $rpathdirs; do
+        acl_save_libdir="$libdir"
+        libdir="$found_dir"
+        eval flag=\"$acl_hardcode_libdir_flag_spec\"
+        libdir="$acl_save_libdir"
+        LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
+      done
+    fi
+  fi
+  if test "X$ltrpathdirs" != "X"; then
+            for found_dir in $ltrpathdirs; do
+      LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir"
+    done
+  fi
+
+
+
+
+
+          { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libintl" >&5
+$as_echo_n "checking for GNU gettext in libintl... " >&6; }
+if eval \${$gt_func_gnugettext_libintl+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  gt_save_CPPFLAGS="$CPPFLAGS"
+            CPPFLAGS="$CPPFLAGS $INCINTL"
+            gt_save_LIBS="$LIBS"
+            LIBS="$LIBS $LIBINTL"
+                        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <libintl.h>
+#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);
+#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias (""))
+#else
+#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0
+#endif
+$gt_revision_test_code
+
+int
+main ()
+{
+
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$gt_func_gnugettext_libintl=yes"
+else
+  eval "$gt_func_gnugettext_libintl=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+                        if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then
+              LIBS="$LIBS $LIBICONV"
+              cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <libintl.h>
+#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);
+#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias (""))
+#else
+#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0
+#endif
+$gt_revision_test_code
+
+int
+main ()
+{
+
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  LIBINTL="$LIBINTL $LIBICONV"
+                 LTLIBINTL="$LTLIBINTL $LTLIBICONV"
+                 eval "$gt_func_gnugettext_libintl=yes"
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+            fi
+            CPPFLAGS="$gt_save_CPPFLAGS"
+            LIBS="$gt_save_LIBS"
+fi
+eval ac_res=\$$gt_func_gnugettext_libintl
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+        fi
+
+                                        if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \
+           || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \
+                && test "$PACKAGE" != gettext-runtime \
+                && test "$PACKAGE" != gettext-tools; }; then
+          gt_use_preinstalled_gnugettext=yes
+        else
+                    LIBINTL=
+          LTLIBINTL=
+          INCINTL=
+        fi
+
+
+        if test "$gt_use_preinstalled_gnugettext" != "yes"; then
+                              nls_cv_use_gnu_gettext=yes
+        fi
+      fi
+
+      if test "$nls_cv_use_gnu_gettext" = "yes"; then
+                BUILD_INCLUDED_LIBINTL=yes
+        USE_INCLUDED_LIBINTL=yes
+        LIBINTL="lib/intl/libintl.a $LIBICONV $LIBTHREAD"
+        LTLIBINTL="lib/intl/libintl.a $LTLIBICONV $LTLIBTHREAD"
+        LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
+      fi
+
+      CATOBJEXT=
+      if test "$gt_use_preinstalled_gnugettext" = "yes" \
+         || test "$nls_cv_use_gnu_gettext" = "yes"; then
+                CATOBJEXT=.gmo
+      fi
+
+
+    if test -n "$INTL_MACOSX_LIBS"; then
+      if test "$gt_use_preinstalled_gnugettext" = "yes" \
+         || test "$nls_cv_use_gnu_gettext" = "yes"; then
+                LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
+        LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
+      fi
+    fi
+
+    if test "$gt_use_preinstalled_gnugettext" = "yes" \
+       || test "$nls_cv_use_gnu_gettext" = "yes"; then
+
+$as_echo "#define ENABLE_NLS 1" >>confdefs.h
+
+    else
+      USE_NLS=no
+    fi
+  fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use NLS" >&5
+$as_echo_n "checking whether to use NLS... " >&6; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5
+$as_echo "$USE_NLS" >&6; }
+  if test "$USE_NLS" = "yes"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking where the gettext function comes from" >&5
+$as_echo_n "checking where the gettext function comes from... " >&6; }
+    if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+      if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+        gt_source="external libintl"
+      else
+        gt_source="libc"
+      fi
+    else
+      gt_source="included intl directory"
+    fi
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_source" >&5
+$as_echo "$gt_source" >&6; }
+  fi
+
+  if test "$USE_NLS" = "yes"; then
+
+    if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+      if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+        { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libintl" >&5
+$as_echo_n "checking how to link with libintl... " >&6; }
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBINTL" >&5
+$as_echo "$LIBINTL" >&6; }
+
+  for element in $INCINTL; do
+    haveit=
+    for x in $CPPFLAGS; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+      if test "X$x" = "X$element"; then
+        haveit=yes
+        break
+      fi
+    done
+    if test -z "$haveit"; then
+      CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+    fi
+  done
+
+      fi
+
+
+$as_echo "#define HAVE_GETTEXT 1" >>confdefs.h
+
+
+$as_echo "#define HAVE_DCGETTEXT 1" >>confdefs.h
+
+    fi
+
+        POSUB=po
+  fi
+
+
+            if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then
+      BUILD_INCLUDED_LIBINTL=yes
+    fi
+
+
+
+
+
+        nls_cv_header_intl=
+    nls_cv_header_libgt=
+
+        DATADIRNAME=share
+
+
+        INSTOBJEXT=.mo
+
+
+        GENCAT=gencat
+
+
+        INTLOBJS=
+    if test "$USE_INCLUDED_LIBINTL" = yes; then
+      INTLOBJS="\$(GETTOBJS)"
+    fi
+
+
+        INTL_LIBTOOL_SUFFIX_PREFIX=
+
+
+
+    INTLLIBS="$LIBINTL"
+
+
+
+
+
+
+
+ac_header_dirent=no
+for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do
+  as_ac_Header=`$as_echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh`
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_hdr that defines DIR" >&5
+$as_echo_n "checking for $ac_hdr that defines DIR... " >&6; }
+if eval \${$as_ac_Header+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <$ac_hdr>
+
+int
+main ()
+{
+if ((DIR *) 0)
+return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$as_ac_Header=yes"
+else
+  eval "$as_ac_Header=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$as_ac_Header
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_hdr" | $as_tr_cpp` 1
+_ACEOF
+
+ac_header_dirent=$ac_hdr; break
+fi
+
+done
+# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
+if test $ac_header_dirent = dirent.h; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5
+$as_echo_n "checking for library containing opendir... " >&6; }
+if ${ac_cv_search_opendir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char opendir ();
+int
+main ()
+{
+return opendir ();
+  ;
+  return 0;
+}
+_ACEOF
+for ac_lib in '' dir; do
+  if test -z "$ac_lib"; then
+    ac_res="none required"
+  else
+    ac_res=-l$ac_lib
+    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
+  fi
+  if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_search_opendir=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if ${ac_cv_search_opendir+:} false; then :
+  break
+fi
+done
+if ${ac_cv_search_opendir+:} false; then :
+
+else
+  ac_cv_search_opendir=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5
+$as_echo "$ac_cv_search_opendir" >&6; }
+ac_res=$ac_cv_search_opendir
+if test "$ac_res" != no; then :
+  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5
+$as_echo_n "checking for library containing opendir... " >&6; }
+if ${ac_cv_search_opendir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char opendir ();
+int
+main ()
+{
+return opendir ();
+  ;
+  return 0;
+}
+_ACEOF
+for ac_lib in '' x; do
+  if test -z "$ac_lib"; then
+    ac_res="none required"
+  else
+    ac_res=-l$ac_lib
+    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
+  fi
+  if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_search_opendir=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if ${ac_cv_search_opendir+:} false; then :
+  break
+fi
+done
+if ${ac_cv_search_opendir+:} false; then :
+
+else
+  ac_cv_search_opendir=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5
+$as_echo "$ac_cv_search_opendir" >&6; }
+ac_res=$ac_cv_search_opendir
+if test "$ac_res" != no; then :
+  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether time.h and sys/time.h may both be included" >&5
+$as_echo_n "checking whether time.h and sys/time.h may both be included... " >&6; }
+if ${ac_cv_header_time+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <sys/time.h>
+#include <time.h>
+
+int
+main ()
+{
+if ((struct tm *) 0)
+return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_time=yes
+else
+  ac_cv_header_time=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_time" >&5
+$as_echo "$ac_cv_header_time" >&6; }
+if test $ac_cv_header_time = yes; then
+
+$as_echo "#define TIME_WITH_SYS_TIME 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether sys/types.h defines makedev" >&5
+$as_echo_n "checking whether sys/types.h defines makedev... " >&6; }
+if ${ac_cv_header_sys_types_h_makedev+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+int
+main ()
+{
+return makedev(0, 0);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_header_sys_types_h_makedev=yes
+else
+  ac_cv_header_sys_types_h_makedev=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_sys_types_h_makedev" >&5
+$as_echo "$ac_cv_header_sys_types_h_makedev" >&6; }
+
+if test $ac_cv_header_sys_types_h_makedev = no; then
+ac_fn_c_check_header_mongrel "$LINENO" "sys/mkdev.h" "ac_cv_header_sys_mkdev_h" "$ac_includes_default"
+if test "x$ac_cv_header_sys_mkdev_h" = xyes; then :
+
+$as_echo "#define MAJOR_IN_MKDEV 1" >>confdefs.h
+
+fi
+
+
+
+  if test $ac_cv_header_sys_mkdev_h = no; then
+    ac_fn_c_check_header_mongrel "$LINENO" "sys/sysmacros.h" "ac_cv_header_sys_sysmacros_h" "$ac_includes_default"
+if test "x$ac_cv_header_sys_sysmacros_h" = xyes; then :
+
+$as_echo "#define MAJOR_IN_SYSMACROS 1" >>confdefs.h
+
+fi
+
+
+  fi
+fi
+
+
+
+ for ac_header in inttypes.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "inttypes.h" "ac_cv_header_inttypes_h" "$ac_includes_default"
+if test "x$ac_cv_header_inttypes_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_INTTYPES_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+for ac_header in unistd.h stdlib.h stdarg.h varargs.h limits.h string.h \
+		 memory.h locale.h termcap.h termio.h termios.h dlfcn.h \
+		 stdbool.h stddef.h stdint.h netdb.h pwd.h grp.h strings.h \
+		 regex.h syslog.h ulimit.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+for ac_header in sys/pte.h sys/stream.h sys/select.h sys/file.h sys/ioctl.h \
+		 sys/mman.h sys/param.h sys/random.h sys/socket.h sys/stat.h \
+		 sys/time.h sys/times.h sys/types.h sys/wait.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+for ac_header in netinet/in.h arpa/inet.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+ac_fn_c_check_header_compile "$LINENO" "sys/ptem.h" "ac_cv_header_sys_ptem_h" "
+#if HAVE_SYS_STREAM_H
+#  include <sys/stream.h>
+#endif
+
+"
+if test "x$ac_cv_header_sys_ptem_h" = xyes; then :
+
+fi
+
+
+
+ac_fn_c_check_header_compile "$LINENO" "sys/resource.h" "ac_cv_header_sys_resource_h" "
+#if HAVE_SYS_TIME_H
+#  include <sys/time.h>
+#endif
+
+"
+if test "x$ac_cv_header_sys_resource_h" = xyes; then :
+  $as_echo "#define HAVE_SYS_RESOURCE_H 1" >>confdefs.h
+
+fi
+
+
+
+# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
+# for constant arguments.  Useless!
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working alloca.h" >&5
+$as_echo_n "checking for working alloca.h... " >&6; }
+if ${ac_cv_working_alloca_h+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <alloca.h>
+int
+main ()
+{
+char *p = (char *) alloca (2 * sizeof (int));
+			  if (p) return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_working_alloca_h=yes
+else
+  ac_cv_working_alloca_h=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_working_alloca_h" >&5
+$as_echo "$ac_cv_working_alloca_h" >&6; }
+if test $ac_cv_working_alloca_h = yes; then
+
+$as_echo "#define HAVE_ALLOCA_H 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for alloca" >&5
+$as_echo_n "checking for alloca... " >&6; }
+if ${ac_cv_func_alloca_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __GNUC__
+# define alloca __builtin_alloca
+#else
+# ifdef _MSC_VER
+#  include <malloc.h>
+#  define alloca _alloca
+# else
+#  ifdef HAVE_ALLOCA_H
+#   include <alloca.h>
+#  else
+#   ifdef _AIX
+ #pragma alloca
+#   else
+#    ifndef alloca /* predefined by HP cc +Olibcalls */
+void *alloca (size_t);
+#    endif
+#   endif
+#  endif
+# endif
+#endif
+
+int
+main ()
+{
+char *p = (char *) alloca (1);
+				    if (p) return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_func_alloca_works=yes
+else
+  ac_cv_func_alloca_works=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_alloca_works" >&5
+$as_echo "$ac_cv_func_alloca_works" >&6; }
+
+if test $ac_cv_func_alloca_works = yes; then
+
+$as_echo "#define HAVE_ALLOCA 1" >>confdefs.h
+
+else
+  # The SVR3 libPW and SVR4 libucb both contain incompatible functions
+# that cause trouble.  Some versions do not even contain alloca or
+# contain a buggy version.  If you still want to use their alloca,
+# use ar to extract alloca.o from them instead of compiling alloca.c.
+
+ALLOCA=\${LIBOBJDIR}alloca.$ac_objext
+
+$as_echo "#define C_ALLOCA 1" >>confdefs.h
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether \`alloca.c' needs Cray hooks" >&5
+$as_echo_n "checking whether \`alloca.c' needs Cray hooks... " >&6; }
+if ${ac_cv_os_cray+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if defined CRAY && ! defined CRAY2
+webecray
+#else
+wenotbecray
+#endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "webecray" >/dev/null 2>&1; then :
+  ac_cv_os_cray=yes
+else
+  ac_cv_os_cray=no
+fi
+rm -f conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_os_cray" >&5
+$as_echo "$ac_cv_os_cray" >&6; }
+if test $ac_cv_os_cray = yes; then
+  for ac_func in _getb67 GETB67 getb67; do
+    as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+
+cat >>confdefs.h <<_ACEOF
+#define CRAY_STACKSEG_END $ac_func
+_ACEOF
+
+    break
+fi
+
+  done
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking stack direction for C alloca" >&5
+$as_echo_n "checking stack direction for C alloca... " >&6; }
+if ${ac_cv_c_stack_direction+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ac_cv_c_stack_direction=0
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_includes_default
+int
+find_stack_direction (int *addr, int depth)
+{
+  int dir, dummy = 0;
+  if (! addr)
+    addr = &dummy;
+  *addr = addr < &dummy ? 1 : addr == &dummy ? 0 : -1;
+  dir = depth ? find_stack_direction (addr, depth - 1) : 0;
+  return dir + dummy;
+}
+
+int
+main (int argc, char **argv)
+{
+  return find_stack_direction (0, argc + !argv + 20) < 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_c_stack_direction=1
+else
+  ac_cv_c_stack_direction=-1
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_stack_direction" >&5
+$as_echo "$ac_cv_c_stack_direction" >&6; }
+cat >>confdefs.h <<_ACEOF
+#define STACK_DIRECTION $ac_cv_c_stack_direction
+_ACEOF
+
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for uid_t in sys/types.h" >&5
+$as_echo_n "checking for uid_t in sys/types.h... " >&6; }
+if ${ac_cv_type_uid_t+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "uid_t" >/dev/null 2>&1; then :
+  ac_cv_type_uid_t=yes
+else
+  ac_cv_type_uid_t=no
+fi
+rm -f conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_uid_t" >&5
+$as_echo "$ac_cv_type_uid_t" >&6; }
+if test $ac_cv_type_uid_t = no; then
+
+$as_echo "#define uid_t int" >>confdefs.h
+
+
+$as_echo "#define gid_t int" >>confdefs.h
+
+fi
+
+for ac_header in unistd.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "unistd.h" "ac_cv_header_unistd_h" "$ac_includes_default"
+if test "x$ac_cv_header_unistd_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_UNISTD_H 1
+_ACEOF
+
+fi
+
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working chown" >&5
+$as_echo_n "checking for working chown... " >&6; }
+if ${ac_cv_func_chown_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ac_cv_func_chown_works=no
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_includes_default
+#include <fcntl.h>
+
+int
+main ()
+{
+  char *f = "conftest.chown";
+  struct stat before, after;
+
+  if (creat (f, 0600) < 0)
+    return 1;
+  if (stat (f, &before) < 0)
+    return 1;
+  if (chown (f, (uid_t) -1, (gid_t) -1) == -1)
+    return 1;
+  if (stat (f, &after) < 0)
+    return 1;
+  return ! (before.st_uid == after.st_uid && before.st_gid == after.st_gid);
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_func_chown_works=yes
+else
+  ac_cv_func_chown_works=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+rm -f conftest.chown
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_chown_works" >&5
+$as_echo "$ac_cv_func_chown_works" >&6; }
+if test $ac_cv_func_chown_works = yes; then
+
+$as_echo "#define HAVE_CHOWN 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether getpgrp requires zero arguments" >&5
+$as_echo_n "checking whether getpgrp requires zero arguments... " >&6; }
+if ${ac_cv_func_getpgrp_void+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # Use it with a single arg.
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+getpgrp (0);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_func_getpgrp_void=no
+else
+  ac_cv_func_getpgrp_void=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_getpgrp_void" >&5
+$as_echo "$ac_cv_func_getpgrp_void" >&6; }
+if test $ac_cv_func_getpgrp_void = yes; then
+
+$as_echo "#define GETPGRP_VOID 1" >>confdefs.h
+
+fi
+
+if ${ac_cv_func_setvbuf_reversed+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_func_setvbuf_reversed=no
+fi
+
+
+for ac_func in vprintf
+do :
+  ac_fn_c_check_func "$LINENO" "vprintf" "ac_cv_func_vprintf"
+if test "x$ac_cv_func_vprintf" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_VPRINTF 1
+_ACEOF
+
+ac_fn_c_check_func "$LINENO" "_doprnt" "ac_cv_func__doprnt"
+if test "x$ac_cv_func__doprnt" = xyes; then :
+
+$as_echo "#define HAVE_DOPRNT 1" >>confdefs.h
+
+fi
+
+fi
+done
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working strcoll" >&5
+$as_echo_n "checking for working strcoll... " >&6; }
+if ${ac_cv_func_strcoll_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ac_cv_func_strcoll_works=no
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+return (strcoll ("abc", "def") >= 0 ||
+	 strcoll ("ABC", "DEF") >= 0 ||
+	 strcoll ("123", "456") >= 0)
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_func_strcoll_works=yes
+else
+  ac_cv_func_strcoll_works=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_strcoll_works" >&5
+$as_echo "$ac_cv_func_strcoll_works" >&6; }
+if test $ac_cv_func_strcoll_works = yes; then
+
+$as_echo "#define HAVE_STRCOLL 1" >>confdefs.h
+
+fi
+
+
+
+if test "$ac_cv_func_alloca_works" = "no" && test "$opt_bash_malloc" = "no"; then
+	MALLOC_TARGET=alloca
+	MALLOC_SRC=alloca.c
+
+	MALLOC_LIB='-lmalloc'
+	MALLOC_LIBRARY='$(ALLOC_LIBDIR)/libmalloc.a'
+	MALLOC_LDFLAGS='-L$(ALLOC_LIBDIR)'
+	MALLOC_DEP='$(MALLOC_LIBRARY)'
+fi
+
+if test "$ac_cv_func_vprintf" = no; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for declaration of vprintf in stdio.h" >&5
+$as_echo_n "checking for declaration of vprintf in stdio.h... " >&6; }
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "[int[ 	]*vprintf[^a-zA-Z0-9]]" >/dev/null 2>&1; then :
+  ac_cv_func_vprintf=yes
+fi
+rm -f conftest*
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_vprintf" >&5
+$as_echo "$ac_cv_func_vprintf" >&6; }
+    if test $ac_cv_func_vprintf = yes; then
+	$as_echo "#define HAVE_VPRINTF 1" >>confdefs.h
+
+    fi
+fi
+
+if test "$ac_cv_func_vprintf" = no && test "$ac_cv_func__doprnt" = "yes"; then
+  case " $LIBOBJS " in
+  *" vprint.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS vprint.$ac_objext"
+ ;;
+esac
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking return type of signal handlers" >&5
+$as_echo_n "checking return type of signal handlers... " >&6; }
+if ${ac_cv_type_signal+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <signal.h>
+
+int
+main ()
+{
+return *(signal (0, 0)) (0) == 1;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_type_signal=int
+else
+  ac_cv_type_signal=void
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_signal" >&5
+$as_echo "$ac_cv_type_signal" >&6; }
+
+cat >>confdefs.h <<_ACEOF
+#define RETSIGTYPE $ac_cv_type_signal
+_ACEOF
+
+
+
+ac_fn_c_check_func "$LINENO" "__setostype" "ac_cv_func___setostype"
+if test "x$ac_cv_func___setostype" = xyes; then :
+  $as_echo "#define HAVE_SETOSTYPE 1" >>confdefs.h
+
+fi
+
+ac_fn_c_check_func "$LINENO" "wait3" "ac_cv_func_wait3"
+if test "x$ac_cv_func_wait3" = xyes; then :
+  $as_echo "#define HAVE_WAIT3 1" >>confdefs.h
+
+fi
+
+
+ac_fn_c_check_func "$LINENO" "mkfifo" "ac_cv_func_mkfifo"
+if test "x$ac_cv_func_mkfifo" = xyes; then :
+  $as_echo "#define HAVE_MKFIFO 1" >>confdefs.h
+
+else
+  $as_echo "#define MKFIFO_MISSING 1" >>confdefs.h
+
+fi
+
+
+for ac_func in dup2 eaccess fcntl getdtablesize getentropy getgroups \
+		gethostname getpagesize getpeername getrandom getrlimit \
+		getrusage gettimeofday kill killpg lstat pselect readlink \
+		select setdtablesize setitimer tcgetpgrp uname ulimit waitpid
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+ac_fn_c_check_func "$LINENO" "rename" "ac_cv_func_rename"
+if test "x$ac_cv_func_rename" = xyes; then :
+  $as_echo "#define HAVE_RENAME 1" >>confdefs.h
+
+else
+  case " $LIBOBJS " in
+  *" rename.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS rename.$ac_objext"
+ ;;
+esac
+
+fi
+
+
+
+for ac_func in bcopy bzero confstr faccessat fnmatch \
+		getaddrinfo gethostbyname getservbyname getservent inet_aton \
+		imaxdiv memmove pathconf putenv raise random regcomp regexec \
+		setenv setlinebuf setlocale setvbuf siginterrupt strchr \
+		sysconf syslog tcgetattr times ttyname tzset unsetenv
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+for ac_func in vasprintf asprintf
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+for ac_func in isascii isblank isgraph isprint isspace isxdigit
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+for ac_func in getpwent getpwnam getpwuid
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+for ac_func in mkstemp mkdtemp
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+for ac_func in arc4random
+do :
+  ac_fn_c_check_func "$LINENO" "arc4random" "ac_cv_func_arc4random"
+if test "x$ac_cv_func_arc4random" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_ARC4RANDOM 1
+_ACEOF
+
+fi
+done
+
+
+ac_fn_c_check_func "$LINENO" "getcwd" "ac_cv_func_getcwd"
+if test "x$ac_cv_func_getcwd" = xyes; then :
+  $as_echo "#define HAVE_GETCWD 1" >>confdefs.h
+
+else
+  case " $LIBOBJS " in
+  *" getcwd.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS getcwd.$ac_objext"
+ ;;
+esac
+
+fi
+
+ac_fn_c_check_func "$LINENO" "memset" "ac_cv_func_memset"
+if test "x$ac_cv_func_memset" = xyes; then :
+  $as_echo "#define HAVE_MEMSET 1" >>confdefs.h
+
+else
+  case " $LIBOBJS " in
+  *" memset.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS memset.$ac_objext"
+ ;;
+esac
+
+fi
+
+
+ac_fn_c_check_func "$LINENO" "strcasecmp" "ac_cv_func_strcasecmp"
+if test "x$ac_cv_func_strcasecmp" = xyes; then :
+  $as_echo "#define HAVE_STRCASECMP 1" >>confdefs.h
+
+else
+  case " $LIBOBJS " in
+  *" strcasecmp.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS strcasecmp.$ac_objext"
+ ;;
+esac
+
+fi
+
+ac_fn_c_check_func "$LINENO" "strcasestr" "ac_cv_func_strcasestr"
+if test "x$ac_cv_func_strcasestr" = xyes; then :
+  $as_echo "#define HAVE_STRCASESTR 1" >>confdefs.h
+
+else
+  case " $LIBOBJS " in
+  *" strcasestr.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS strcasestr.$ac_objext"
+ ;;
+esac
+
+fi
+
+ac_fn_c_check_func "$LINENO" "strerror" "ac_cv_func_strerror"
+if test "x$ac_cv_func_strerror" = xyes; then :
+  $as_echo "#define HAVE_STRERROR 1" >>confdefs.h
+
+else
+  case " $LIBOBJS " in
+  *" strerror.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS strerror.$ac_objext"
+ ;;
+esac
+
+fi
+
+ac_fn_c_check_func "$LINENO" "strftime" "ac_cv_func_strftime"
+if test "x$ac_cv_func_strftime" = xyes; then :
+  $as_echo "#define HAVE_STRFTIME 1" >>confdefs.h
+
+else
+  case " $LIBOBJS " in
+  *" strftime.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS strftime.$ac_objext"
+ ;;
+esac
+
+fi
+
+ac_fn_c_check_func "$LINENO" "strnlen" "ac_cv_func_strnlen"
+if test "x$ac_cv_func_strnlen" = xyes; then :
+  $as_echo "#define HAVE_STRNLEN 1" >>confdefs.h
+
+else
+  case " $LIBOBJS " in
+  *" strnlen.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS strnlen.$ac_objext"
+ ;;
+esac
+
+fi
+
+ac_fn_c_check_func "$LINENO" "strpbrk" "ac_cv_func_strpbrk"
+if test "x$ac_cv_func_strpbrk" = xyes; then :
+  $as_echo "#define HAVE_STRPBRK 1" >>confdefs.h
+
+else
+  case " $LIBOBJS " in
+  *" strpbrk.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS strpbrk.$ac_objext"
+ ;;
+esac
+
+fi
+
+ac_fn_c_check_func "$LINENO" "strstr" "ac_cv_func_strstr"
+if test "x$ac_cv_func_strstr" = xyes; then :
+  $as_echo "#define HAVE_STRSTR 1" >>confdefs.h
+
+else
+  case " $LIBOBJS " in
+  *" strstr.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS strstr.$ac_objext"
+ ;;
+esac
+
+fi
+
+
+ac_fn_c_check_func "$LINENO" "strtod" "ac_cv_func_strtod"
+if test "x$ac_cv_func_strtod" = xyes; then :
+  $as_echo "#define HAVE_STRTOD 1" >>confdefs.h
+
+else
+  case " $LIBOBJS " in
+  *" strtod.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS strtod.$ac_objext"
+ ;;
+esac
+
+fi
+
+ac_fn_c_check_func "$LINENO" "strtol" "ac_cv_func_strtol"
+if test "x$ac_cv_func_strtol" = xyes; then :
+  $as_echo "#define HAVE_STRTOL 1" >>confdefs.h
+
+else
+  case " $LIBOBJS " in
+  *" strtol.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS strtol.$ac_objext"
+ ;;
+esac
+
+fi
+
+ac_fn_c_check_func "$LINENO" "strtoul" "ac_cv_func_strtoul"
+if test "x$ac_cv_func_strtoul" = xyes; then :
+  $as_echo "#define HAVE_STRTOUL 1" >>confdefs.h
+
+else
+  case " $LIBOBJS " in
+  *" strtoul.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS strtoul.$ac_objext"
+ ;;
+esac
+
+fi
+
+ac_fn_c_check_func "$LINENO" "strtoll" "ac_cv_func_strtoll"
+if test "x$ac_cv_func_strtoll" = xyes; then :
+  $as_echo "#define HAVE_STRTOLL 1" >>confdefs.h
+
+else
+  case " $LIBOBJS " in
+  *" strtoll.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS strtoll.$ac_objext"
+ ;;
+esac
+
+fi
+
+ac_fn_c_check_func "$LINENO" "strtoull" "ac_cv_func_strtoull"
+if test "x$ac_cv_func_strtoull" = xyes; then :
+  $as_echo "#define HAVE_STRTOULL 1" >>confdefs.h
+
+else
+  case " $LIBOBJS " in
+  *" strtoull.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS strtoull.$ac_objext"
+ ;;
+esac
+
+fi
+
+ac_fn_c_check_func "$LINENO" "strtoimax" "ac_cv_func_strtoimax"
+if test "x$ac_cv_func_strtoimax" = xyes; then :
+  $as_echo "#define HAVE_STRTOIMAX 1" >>confdefs.h
+
+else
+  case " $LIBOBJS " in
+  *" strtoimax.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS strtoimax.$ac_objext"
+ ;;
+esac
+
+fi
+
+ac_fn_c_check_func "$LINENO" "strtoumax" "ac_cv_func_strtoumax"
+if test "x$ac_cv_func_strtoumax" = xyes; then :
+  $as_echo "#define HAVE_STRTOUMAX 1" >>confdefs.h
+
+else
+  case " $LIBOBJS " in
+  *" strtoumax.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS strtoumax.$ac_objext"
+ ;;
+esac
+
+fi
+
+
+ac_fn_c_check_func "$LINENO" "dprintf" "ac_cv_func_dprintf"
+if test "x$ac_cv_func_dprintf" = xyes; then :
+  $as_echo "#define HAVE_DPRINTF 1" >>confdefs.h
+
+else
+  case " $LIBOBJS " in
+  *" dprintf.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS dprintf.$ac_objext"
+ ;;
+esac
+
+fi
+
+
+ac_fn_c_check_func "$LINENO" "strchrnul" "ac_cv_func_strchrnul"
+if test "x$ac_cv_func_strchrnul" = xyes; then :
+  $as_echo "#define HAVE_STRCHRNUL 1" >>confdefs.h
+
+else
+  case " $LIBOBJS " in
+  *" strchrnul.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS strchrnul.$ac_objext"
+ ;;
+esac
+
+fi
+
+
+ac_fn_c_check_func "$LINENO" "strdup" "ac_cv_func_strdup"
+if test "x$ac_cv_func_strdup" = xyes; then :
+  $as_echo "#define HAVE_STRDUP 1" >>confdefs.h
+
+else
+  case " $LIBOBJS " in
+  *" strdup.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS strdup.$ac_objext"
+ ;;
+esac
+
+fi
+
+
+
+for ac_header in libaudit.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "libaudit.h" "ac_cv_header_libaudit_h" "$ac_includes_default"
+if test "x$ac_cv_header_libaudit_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBAUDIT_H 1
+_ACEOF
+
+fi
+
+done
+
+ac_fn_c_check_decl "$LINENO" "AUDIT_USER_TTY" "ac_cv_have_decl_AUDIT_USER_TTY" "#include <linux/audit.h>
+"
+if test "x$ac_cv_have_decl_AUDIT_USER_TTY" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_AUDIT_USER_TTY $ac_have_decl
+_ACEOF
+
+
+ac_fn_c_check_decl "$LINENO" "confstr" "ac_cv_have_decl_confstr" "$ac_includes_default"
+if test "x$ac_cv_have_decl_confstr" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_CONFSTR $ac_have_decl
+_ACEOF
+
+ac_fn_c_check_decl "$LINENO" "printf" "ac_cv_have_decl_printf" "$ac_includes_default"
+if test "x$ac_cv_have_decl_printf" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_PRINTF $ac_have_decl
+_ACEOF
+
+ac_fn_c_check_decl "$LINENO" "sbrk" "ac_cv_have_decl_sbrk" "$ac_includes_default"
+if test "x$ac_cv_have_decl_sbrk" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_SBRK $ac_have_decl
+_ACEOF
+
+ac_fn_c_check_decl "$LINENO" "setregid" "ac_cv_have_decl_setregid" "$ac_includes_default"
+if test "x$ac_cv_have_decl_setregid" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_SETREGID $ac_have_decl
+_ACEOF
+
+ac_fn_c_check_decl "$LINENO" "strcpy" "ac_cv_have_decl_strcpy" "$ac_includes_default"
+if test "x$ac_cv_have_decl_strcpy" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_STRCPY $ac_have_decl
+_ACEOF
+
+ac_fn_c_check_decl "$LINENO" "strsignal" "ac_cv_have_decl_strsignal" "$ac_includes_default"
+if test "x$ac_cv_have_decl_strsignal" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_STRSIGNAL $ac_have_decl
+_ACEOF
+
+
+for ac_func in setresuid setresgid
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+ac_fn_c_check_decl "$LINENO" "strtold" "ac_cv_have_decl_strtold" "$ac_includes_default"
+if test "x$ac_cv_have_decl_strtold" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_STRTOLD $ac_have_decl
+_ACEOF
+if test $ac_have_decl = 1; then :
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for broken strtold" >&5
+$as_echo_n "checking for broken strtold... " >&6; }
+    if ${bash_cv_strtold_broken+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+int
+main ()
+{
+long double r; char *foo, bar; r = strtold(foo, &bar);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  bash_cv_strtold_broken=no
+else
+  bash_cv_strtold_broken=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
+fi
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_strtold_broken" >&5
+$as_echo "$bash_cv_strtold_broken" >&6; }
+    if test "$bash_cv_strtold_broken" = "yes" ; then
+	$as_echo "#define STRTOLD_BROKEN 1" >>confdefs.h
+
+    fi
+
+fi
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for declaration of strtoimax" >&5
+$as_echo_n "checking for declaration of strtoimax... " >&6; }
+if ${bash_cv_decl_strtoimax+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#if STDC_HEADERS
+#  include <stdlib.h>
+#endif
+#if HAVE_INTTYPES_H
+#  include <inttypes.h>
+#endif
+
+int
+main ()
+{
+return !strtoimax;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  bash_cv_decl_strtoimax=yes
+else
+  bash_cv_decl_strtoimax=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_decl_strtoimax" >&5
+$as_echo "$bash_cv_decl_strtoimax" >&6; }
+bash_tr_func=HAVE_DECL_`echo strtoimax | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+if test $bash_cv_decl_strtoimax = yes; then
+  cat >>confdefs.h <<_ACEOF
+#define $bash_tr_func 1
+_ACEOF
+
+else
+  cat >>confdefs.h <<_ACEOF
+#define $bash_tr_func 0
+_ACEOF
+
+fi
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for declaration of strtol" >&5
+$as_echo_n "checking for declaration of strtol... " >&6; }
+if ${bash_cv_decl_strtol+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#if STDC_HEADERS
+#  include <stdlib.h>
+#endif
+#if HAVE_INTTYPES_H
+#  include <inttypes.h>
+#endif
+
+int
+main ()
+{
+return !strtol;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  bash_cv_decl_strtol=yes
+else
+  bash_cv_decl_strtol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_decl_strtol" >&5
+$as_echo "$bash_cv_decl_strtol" >&6; }
+bash_tr_func=HAVE_DECL_`echo strtol | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+if test $bash_cv_decl_strtol = yes; then
+  cat >>confdefs.h <<_ACEOF
+#define $bash_tr_func 1
+_ACEOF
+
+else
+  cat >>confdefs.h <<_ACEOF
+#define $bash_tr_func 0
+_ACEOF
+
+fi
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for declaration of strtoll" >&5
+$as_echo_n "checking for declaration of strtoll... " >&6; }
+if ${bash_cv_decl_strtoll+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#if STDC_HEADERS
+#  include <stdlib.h>
+#endif
+#if HAVE_INTTYPES_H
+#  include <inttypes.h>
+#endif
+
+int
+main ()
+{
+return !strtoll;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  bash_cv_decl_strtoll=yes
+else
+  bash_cv_decl_strtoll=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_decl_strtoll" >&5
+$as_echo "$bash_cv_decl_strtoll" >&6; }
+bash_tr_func=HAVE_DECL_`echo strtoll | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+if test $bash_cv_decl_strtoll = yes; then
+  cat >>confdefs.h <<_ACEOF
+#define $bash_tr_func 1
+_ACEOF
+
+else
+  cat >>confdefs.h <<_ACEOF
+#define $bash_tr_func 0
+_ACEOF
+
+fi
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for declaration of strtoul" >&5
+$as_echo_n "checking for declaration of strtoul... " >&6; }
+if ${bash_cv_decl_strtoul+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#if STDC_HEADERS
+#  include <stdlib.h>
+#endif
+#if HAVE_INTTYPES_H
+#  include <inttypes.h>
+#endif
+
+int
+main ()
+{
+return !strtoul;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  bash_cv_decl_strtoul=yes
+else
+  bash_cv_decl_strtoul=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_decl_strtoul" >&5
+$as_echo "$bash_cv_decl_strtoul" >&6; }
+bash_tr_func=HAVE_DECL_`echo strtoul | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+if test $bash_cv_decl_strtoul = yes; then
+  cat >>confdefs.h <<_ACEOF
+#define $bash_tr_func 1
+_ACEOF
+
+else
+  cat >>confdefs.h <<_ACEOF
+#define $bash_tr_func 0
+_ACEOF
+
+fi
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for declaration of strtoull" >&5
+$as_echo_n "checking for declaration of strtoull... " >&6; }
+if ${bash_cv_decl_strtoull+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#if STDC_HEADERS
+#  include <stdlib.h>
+#endif
+#if HAVE_INTTYPES_H
+#  include <inttypes.h>
+#endif
+
+int
+main ()
+{
+return !strtoull;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  bash_cv_decl_strtoull=yes
+else
+  bash_cv_decl_strtoull=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_decl_strtoull" >&5
+$as_echo "$bash_cv_decl_strtoull" >&6; }
+bash_tr_func=HAVE_DECL_`echo strtoull | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+if test $bash_cv_decl_strtoull = yes; then
+  cat >>confdefs.h <<_ACEOF
+#define $bash_tr_func 1
+_ACEOF
+
+else
+  cat >>confdefs.h <<_ACEOF
+#define $bash_tr_func 0
+_ACEOF
+
+fi
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for declaration of strtoumax" >&5
+$as_echo_n "checking for declaration of strtoumax... " >&6; }
+if ${bash_cv_decl_strtoumax+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#if STDC_HEADERS
+#  include <stdlib.h>
+#endif
+#if HAVE_INTTYPES_H
+#  include <inttypes.h>
+#endif
+
+int
+main ()
+{
+return !strtoumax;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  bash_cv_decl_strtoumax=yes
+else
+  bash_cv_decl_strtoumax=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_decl_strtoumax" >&5
+$as_echo "$bash_cv_decl_strtoumax" >&6; }
+bash_tr_func=HAVE_DECL_`echo strtoumax | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+if test $bash_cv_decl_strtoumax = yes; then
+  cat >>confdefs.h <<_ACEOF
+#define $bash_tr_func 1
+_ACEOF
+
+else
+  cat >>confdefs.h <<_ACEOF
+#define $bash_tr_func 0
+_ACEOF
+
+fi
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working mktime" >&5
+$as_echo_n "checking for working mktime... " >&6; }
+if ${ac_cv_func_working_mktime+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ac_cv_func_working_mktime=no
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Test program from Paul Eggert and Tony Leneis.  */
+#ifdef TIME_WITH_SYS_TIME
+# include <sys/time.h>
+# include <time.h>
+#else
+# ifdef HAVE_SYS_TIME_H
+#  include <sys/time.h>
+# else
+#  include <time.h>
+# endif
+#endif
+
+#include <limits.h>
+#include <stdlib.h>
+
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif
+
+#ifndef HAVE_ALARM
+# define alarm(X) /* empty */
+#endif
+
+/* Work around redefinition to rpl_putenv by other config tests.  */
+#undef putenv
+
+static time_t time_t_max;
+static time_t time_t_min;
+
+/* Values we'll use to set the TZ environment variable.  */
+static const char *tz_strings[] = {
+  (const char *) 0, "TZ=GMT0", "TZ=JST-9",
+  "TZ=EST+3EDT+2,M10.1.0/00:00:00,M2.3.0/00:00:00"
+};
+#define N_STRINGS (sizeof (tz_strings) / sizeof (tz_strings[0]))
+
+/* Return 0 if mktime fails to convert a date in the spring-forward gap.
+   Based on a problem report from Andreas Jaeger.  */
+static int
+spring_forward_gap ()
+{
+  /* glibc (up to about 1998-10-07) failed this test. */
+  struct tm tm;
+
+  /* Use the portable POSIX.1 specification "TZ=PST8PDT,M4.1.0,M10.5.0"
+     instead of "TZ=America/Vancouver" in order to detect the bug even
+     on systems that don't support the Olson extension, or don't have the
+     full zoneinfo tables installed.  */
+  putenv ((char*) "TZ=PST8PDT,M4.1.0,M10.5.0");
+
+  tm.tm_year = 98;
+  tm.tm_mon = 3;
+  tm.tm_mday = 5;
+  tm.tm_hour = 2;
+  tm.tm_min = 0;
+  tm.tm_sec = 0;
+  tm.tm_isdst = -1;
+  return mktime (&tm) != (time_t) -1;
+}
+
+static int
+mktime_test1 (time_t now)
+{
+  struct tm *lt;
+  return ! (lt = localtime (&now)) || mktime (lt) == now;
+}
+
+static int
+mktime_test (time_t now)
+{
+  return (mktime_test1 (now)
+	  && mktime_test1 ((time_t) (time_t_max - now))
+	  && mktime_test1 ((time_t) (time_t_min + now)));
+}
+
+static int
+irix_6_4_bug ()
+{
+  /* Based on code from Ariel Faigon.  */
+  struct tm tm;
+  tm.tm_year = 96;
+  tm.tm_mon = 3;
+  tm.tm_mday = 0;
+  tm.tm_hour = 0;
+  tm.tm_min = 0;
+  tm.tm_sec = 0;
+  tm.tm_isdst = -1;
+  mktime (&tm);
+  return tm.tm_mon == 2 && tm.tm_mday == 31;
+}
+
+static int
+bigtime_test (int j)
+{
+  struct tm tm;
+  time_t now;
+  tm.tm_year = tm.tm_mon = tm.tm_mday = tm.tm_hour = tm.tm_min = tm.tm_sec = j;
+  now = mktime (&tm);
+  if (now != (time_t) -1)
+    {
+      struct tm *lt = localtime (&now);
+      if (! (lt
+	     && lt->tm_year == tm.tm_year
+	     && lt->tm_mon == tm.tm_mon
+	     && lt->tm_mday == tm.tm_mday
+	     && lt->tm_hour == tm.tm_hour
+	     && lt->tm_min == tm.tm_min
+	     && lt->tm_sec == tm.tm_sec
+	     && lt->tm_yday == tm.tm_yday
+	     && lt->tm_wday == tm.tm_wday
+	     && ((lt->tm_isdst < 0 ? -1 : 0 < lt->tm_isdst)
+		  == (tm.tm_isdst < 0 ? -1 : 0 < tm.tm_isdst))))
+	return 0;
+    }
+  return 1;
+}
+
+static int
+year_2050_test ()
+{
+  /* The correct answer for 2050-02-01 00:00:00 in Pacific time,
+     ignoring leap seconds.  */
+  unsigned long int answer = 2527315200UL;
+
+  struct tm tm;
+  time_t t;
+  tm.tm_year = 2050 - 1900;
+  tm.tm_mon = 2 - 1;
+  tm.tm_mday = 1;
+  tm.tm_hour = tm.tm_min = tm.tm_sec = 0;
+  tm.tm_isdst = -1;
+
+  /* Use the portable POSIX.1 specification "TZ=PST8PDT,M4.1.0,M10.5.0"
+     instead of "TZ=America/Vancouver" in order to detect the bug even
+     on systems that don't support the Olson extension, or don't have the
+     full zoneinfo tables installed.  */
+  putenv ((char*) "TZ=PST8PDT,M4.1.0,M10.5.0");
+
+  t = mktime (&tm);
+
+  /* Check that the result is either a failure, or close enough
+     to the correct answer that we can assume the discrepancy is
+     due to leap seconds.  */
+  return (t == (time_t) -1
+	  || (0 < t && answer - 120 <= t && t <= answer + 120));
+}
+
+int
+main ()
+{
+  time_t t, delta;
+  int i, j;
+
+  /* This test makes some buggy mktime implementations loop.
+     Give up after 60 seconds; a mktime slower than that
+     isn't worth using anyway.  */
+  alarm (60);
+
+  for (;;)
+    {
+      t = (time_t_max << 1) + 1;
+      if (t <= time_t_max)
+	break;
+      time_t_max = t;
+    }
+  time_t_min = - ((time_t) ~ (time_t) 0 == (time_t) -1) - time_t_max;
+
+  delta = time_t_max / 997; /* a suitable prime number */
+  for (i = 0; i < N_STRINGS; i++)
+    {
+      if (tz_strings[i])
+	putenv ((char*) tz_strings[i]);
+
+      for (t = 0; t <= time_t_max - delta; t += delta)
+	if (! mktime_test (t))
+	  return 1;
+      if (! (mktime_test ((time_t) 1)
+	     && mktime_test ((time_t) (60 * 60))
+	     && mktime_test ((time_t) (60 * 60 * 24))))
+	return 1;
+
+      for (j = 1; ; j <<= 1)
+	if (! bigtime_test (j))
+	  return 1;
+	else if (INT_MAX / 2 < j)
+	  break;
+      if (! bigtime_test (INT_MAX))
+	return 1;
+    }
+  return ! (irix_6_4_bug () && spring_forward_gap () && year_2050_test ());
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_func_working_mktime=yes
+else
+  ac_cv_func_working_mktime=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_working_mktime" >&5
+$as_echo "$ac_cv_func_working_mktime" >&6; }
+if test $ac_cv_func_working_mktime = no; then
+  case " $LIBOBJS " in
+  *" mktime.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS mktime.$ac_objext"
+ ;;
+esac
+
+fi
+
+
+
+for ac_header in argz.h errno.h fcntl.h malloc.h stdio_ext.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+for ac_func in getpagesize
+do :
+  ac_fn_c_check_func "$LINENO" "getpagesize" "ac_cv_func_getpagesize"
+if test "x$ac_cv_func_getpagesize" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_GETPAGESIZE 1
+_ACEOF
+
+fi
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working mmap" >&5
+$as_echo_n "checking for working mmap... " >&6; }
+if ${ac_cv_func_mmap_fixed_mapped+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ac_cv_func_mmap_fixed_mapped=no
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_includes_default
+/* malloc might have been renamed as rpl_malloc. */
+#undef malloc
+
+/* Thanks to Mike Haertel and Jim Avera for this test.
+   Here is a matrix of mmap possibilities:
+	mmap private not fixed
+	mmap private fixed at somewhere currently unmapped
+	mmap private fixed at somewhere already mapped
+	mmap shared not fixed
+	mmap shared fixed at somewhere currently unmapped
+	mmap shared fixed at somewhere already mapped
+   For private mappings, we should verify that changes cannot be read()
+   back from the file, nor mmap's back from the file at a different
+   address.  (There have been systems where private was not correctly
+   implemented like the infamous i386 svr4.0, and systems where the
+   VM page cache was not coherent with the file system buffer cache
+   like early versions of FreeBSD and possibly contemporary NetBSD.)
+   For shared mappings, we should conversely verify that changes get
+   propagated back to all the places they're supposed to be.
+
+   Grep wants private fixed already mapped.
+   The main things grep needs to know about mmap are:
+   * does it exist and is it safe to write into the mmap'd area
+   * how to use it (BSD variants)  */
+
+#include <fcntl.h>
+#include <sys/mman.h>
+
+#if !defined STDC_HEADERS && !defined HAVE_STDLIB_H
+char *malloc ();
+#endif
+
+/* This mess was copied from the GNU getpagesize.h.  */
+#ifndef HAVE_GETPAGESIZE
+# ifdef _SC_PAGESIZE
+#  define getpagesize() sysconf(_SC_PAGESIZE)
+# else /* no _SC_PAGESIZE */
+#  ifdef HAVE_SYS_PARAM_H
+#   include <sys/param.h>
+#   ifdef EXEC_PAGESIZE
+#    define getpagesize() EXEC_PAGESIZE
+#   else /* no EXEC_PAGESIZE */
+#    ifdef NBPG
+#     define getpagesize() NBPG * CLSIZE
+#     ifndef CLSIZE
+#      define CLSIZE 1
+#     endif /* no CLSIZE */
+#    else /* no NBPG */
+#     ifdef NBPC
+#      define getpagesize() NBPC
+#     else /* no NBPC */
+#      ifdef PAGESIZE
+#       define getpagesize() PAGESIZE
+#      endif /* PAGESIZE */
+#     endif /* no NBPC */
+#    endif /* no NBPG */
+#   endif /* no EXEC_PAGESIZE */
+#  else /* no HAVE_SYS_PARAM_H */
+#   define getpagesize() 8192	/* punt totally */
+#  endif /* no HAVE_SYS_PARAM_H */
+# endif /* no _SC_PAGESIZE */
+
+#endif /* no HAVE_GETPAGESIZE */
+
+int
+main ()
+{
+  char *data, *data2, *data3;
+  const char *cdata2;
+  int i, pagesize;
+  int fd, fd2;
+
+  pagesize = getpagesize ();
+
+  /* First, make a file with some known garbage in it. */
+  data = (char *) malloc (pagesize);
+  if (!data)
+    return 1;
+  for (i = 0; i < pagesize; ++i)
+    *(data + i) = rand ();
+  umask (0);
+  fd = creat ("conftest.mmap", 0600);
+  if (fd < 0)
+    return 2;
+  if (write (fd, data, pagesize) != pagesize)
+    return 3;
+  close (fd);
+
+  /* Next, check that the tail of a page is zero-filled.  File must have
+     non-zero length, otherwise we risk SIGBUS for entire page.  */
+  fd2 = open ("conftest.txt", O_RDWR | O_CREAT | O_TRUNC, 0600);
+  if (fd2 < 0)
+    return 4;
+  cdata2 = "";
+  if (write (fd2, cdata2, 1) != 1)
+    return 5;
+  data2 = (char *) mmap (0, pagesize, PROT_READ | PROT_WRITE, MAP_SHARED, fd2, 0L);
+  if (data2 == MAP_FAILED)
+    return 6;
+  for (i = 0; i < pagesize; ++i)
+    if (*(data2 + i))
+      return 7;
+  close (fd2);
+  if (munmap (data2, pagesize))
+    return 8;
+
+  /* Next, try to mmap the file at a fixed address which already has
+     something else allocated at it.  If we can, also make sure that
+     we see the same garbage.  */
+  fd = open ("conftest.mmap", O_RDWR);
+  if (fd < 0)
+    return 9;
+  if (data2 != mmap (data2, pagesize, PROT_READ | PROT_WRITE,
+		     MAP_PRIVATE | MAP_FIXED, fd, 0L))
+    return 10;
+  for (i = 0; i < pagesize; ++i)
+    if (*(data + i) != *(data2 + i))
+      return 11;
+
+  /* Finally, make sure that changes to the mapped area do not
+     percolate back to the file as seen by read().  (This is a bug on
+     some variants of i386 svr4.0.)  */
+  for (i = 0; i < pagesize; ++i)
+    *(data2 + i) = *(data2 + i) + 1;
+  data3 = (char *) malloc (pagesize);
+  if (!data3)
+    return 12;
+  if (read (fd, data3, pagesize) != pagesize)
+    return 13;
+  for (i = 0; i < pagesize; ++i)
+    if (*(data + i) != *(data3 + i))
+      return 14;
+  close (fd);
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_func_mmap_fixed_mapped=yes
+else
+  ac_cv_func_mmap_fixed_mapped=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_mmap_fixed_mapped" >&5
+$as_echo "$ac_cv_func_mmap_fixed_mapped" >&6; }
+if test $ac_cv_func_mmap_fixed_mapped = yes; then
+
+$as_echo "#define HAVE_MMAP 1" >>confdefs.h
+
+fi
+rm -f conftest.mmap conftest.txt
+
+for ac_func in __argz_count __argz_next __argz_stringify dcgettext mempcpy \
+		munmap mremap stpcpy strcspn
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+INTL_DEP= INTL_INC= LIBINTL_H=
+if test "x$USE_INCLUDED_LIBINTL" = "xyes"; then
+	INTL_DEP='${INTL_LIBDIR}/libintl.a'
+	INTL_INC='-I${INTL_LIBSRC} -I${INTL_BUILDDIR}'
+	LIBINTL_H='${INTL_BUILDDIR}/libintl.h'
+fi
+
+
+
+
+
+
+for ac_header in wctype.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "wctype.h" "ac_cv_header_wctype_h" "$ac_includes_default"
+if test "x$ac_cv_header_wctype_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_WCTYPE_H 1
+_ACEOF
+
+fi
+
+done
+
+for ac_header in wchar.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "wchar.h" "ac_cv_header_wchar_h" "$ac_includes_default"
+if test "x$ac_cv_header_wchar_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_WCHAR_H 1
+_ACEOF
+
+fi
+
+done
+
+for ac_header in langinfo.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "langinfo.h" "ac_cv_header_langinfo_h" "$ac_includes_default"
+if test "x$ac_cv_header_langinfo_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_LANGINFO_H 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_header in mbstr.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "mbstr.h" "ac_cv_header_mbstr_h" "$ac_includes_default"
+if test "x$ac_cv_header_mbstr_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_MBSTR_H 1
+_ACEOF
+
+fi
+
+done
+
+
+ac_fn_c_check_func "$LINENO" "mbrlen" "ac_cv_func_mbrlen"
+if test "x$ac_cv_func_mbrlen" = xyes; then :
+  $as_echo "#define HAVE_MBRLEN 1" >>confdefs.h
+
+fi
+
+ac_fn_c_check_func "$LINENO" "mbscasecmp" "ac_cv_func_mbscasecmp"
+if test "x$ac_cv_func_mbscasecmp" = xyes; then :
+  $as_echo "#define HAVE_MBSCMP 1" >>confdefs.h
+
+fi
+
+ac_fn_c_check_func "$LINENO" "mbscmp" "ac_cv_func_mbscmp"
+if test "x$ac_cv_func_mbscmp" = xyes; then :
+  $as_echo "#define HAVE_MBSCMP 1" >>confdefs.h
+
+fi
+
+ac_fn_c_check_func "$LINENO" "mbsnrtowcs" "ac_cv_func_mbsnrtowcs"
+if test "x$ac_cv_func_mbsnrtowcs" = xyes; then :
+  $as_echo "#define HAVE_MBSNRTOWCS 1" >>confdefs.h
+
+fi
+
+ac_fn_c_check_func "$LINENO" "mbsrtowcs" "ac_cv_func_mbsrtowcs"
+if test "x$ac_cv_func_mbsrtowcs" = xyes; then :
+  $as_echo "#define HAVE_MBSRTOWCS 1" >>confdefs.h
+
+fi
+
+
+ac_fn_c_check_func "$LINENO" "mbschr" "ac_cv_func_mbschr"
+if test "x$ac_cv_func_mbschr" = xyes; then :
+  $as_echo "#define HAVE_MBSCHR 1" >>confdefs.h
+
+else
+  case " $LIBOBJS " in
+  *" mbschr.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS mbschr.$ac_objext"
+ ;;
+esac
+
+fi
+
+
+
+ac_fn_c_check_func "$LINENO" "wcrtomb" "ac_cv_func_wcrtomb"
+if test "x$ac_cv_func_wcrtomb" = xyes; then :
+  $as_echo "#define HAVE_WCRTOMB 1" >>confdefs.h
+
+fi
+
+ac_fn_c_check_func "$LINENO" "wcscoll" "ac_cv_func_wcscoll"
+if test "x$ac_cv_func_wcscoll" = xyes; then :
+  $as_echo "#define HAVE_WCSCOLL 1" >>confdefs.h
+
+fi
+
+ac_fn_c_check_func "$LINENO" "wcsdup" "ac_cv_func_wcsdup"
+if test "x$ac_cv_func_wcsdup" = xyes; then :
+  $as_echo "#define HAVE_WCSDUP 1" >>confdefs.h
+
+fi
+
+ac_fn_c_check_func "$LINENO" "wcwidth" "ac_cv_func_wcwidth"
+if test "x$ac_cv_func_wcwidth" = xyes; then :
+  $as_echo "#define HAVE_WCWIDTH 1" >>confdefs.h
+
+fi
+
+ac_fn_c_check_func "$LINENO" "wctype" "ac_cv_func_wctype"
+if test "x$ac_cv_func_wctype" = xyes; then :
+  $as_echo "#define HAVE_WCTYPE 1" >>confdefs.h
+
+fi
+
+
+ac_fn_c_check_func "$LINENO" "wcswidth" "ac_cv_func_wcswidth"
+if test "x$ac_cv_func_wcswidth" = xyes; then :
+  $as_echo "#define HAVE_WCSWIDTH 1" >>confdefs.h
+
+else
+  case " $LIBOBJS " in
+  *" wcswidth.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS wcswidth.$ac_objext"
+ ;;
+esac
+
+fi
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether mbrtowc and mbstate_t are properly declared" >&5
+$as_echo_n "checking whether mbrtowc and mbstate_t are properly declared... " >&6; }
+if ${ac_cv_func_mbrtowc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <wchar.h>
+int
+main ()
+{
+wchar_t wc;
+	      char const s[] = "";
+	      size_t n = 1;
+	      mbstate_t state;
+	      return ! (sizeof state && (mbrtowc) (&wc, s, n, &state));
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_func_mbrtowc=yes
+else
+  ac_cv_func_mbrtowc=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_mbrtowc" >&5
+$as_echo "$ac_cv_func_mbrtowc" >&6; }
+  if test $ac_cv_func_mbrtowc = yes; then
+
+$as_echo "#define HAVE_MBRTOWC 1" >>confdefs.h
+
+  fi
+
+if test $ac_cv_func_mbrtowc = yes; then
+	$as_echo "#define HAVE_MBSTATE_T 1" >>confdefs.h
+
+fi
+
+for ac_func in iswlower iswupper towlower towupper iswctype
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for nl_langinfo and CODESET" >&5
+$as_echo_n "checking for nl_langinfo and CODESET... " >&6; }
+if ${bash_cv_langinfo_codeset+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <langinfo.h>
+int
+main ()
+{
+char* cs = nl_langinfo(CODESET);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  bash_cv_langinfo_codeset=yes
+else
+  bash_cv_langinfo_codeset=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_langinfo_codeset" >&5
+$as_echo "$bash_cv_langinfo_codeset" >&6; }
+if test $bash_cv_langinfo_codeset = yes; then
+  $as_echo "#define HAVE_LANGINFO_CODESET 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for wchar_t in wchar.h" >&5
+$as_echo_n "checking for wchar_t in wchar.h... " >&6; }
+if ${bash_cv_type_wchar_t+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <wchar.h>
+
+int
+main ()
+{
+
+        wchar_t foo;
+        foo = 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  bash_cv_type_wchar_t=yes
+else
+  bash_cv_type_wchar_t=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_type_wchar_t" >&5
+$as_echo "$bash_cv_type_wchar_t" >&6; }
+if test $bash_cv_type_wchar_t = yes; then
+
+$as_echo "#define HAVE_WCHAR_T 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for wctype_t in wctype.h" >&5
+$as_echo_n "checking for wctype_t in wctype.h... " >&6; }
+if ${bash_cv_type_wctype_t+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <wctype.h>
+int
+main ()
+{
+
+        wctype_t foo;
+        foo = 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  bash_cv_type_wctype_t=yes
+else
+  bash_cv_type_wctype_t=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_type_wctype_t" >&5
+$as_echo "$bash_cv_type_wctype_t" >&6; }
+if test $bash_cv_type_wctype_t = yes; then
+
+$as_echo "#define HAVE_WCTYPE_T 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for wint_t in wctype.h" >&5
+$as_echo_n "checking for wint_t in wctype.h... " >&6; }
+if ${bash_cv_type_wint_t+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <wctype.h>
+int
+main ()
+{
+
+        wint_t foo;
+        foo = 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  bash_cv_type_wint_t=yes
+else
+  bash_cv_type_wint_t=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_type_wint_t" >&5
+$as_echo "$bash_cv_type_wint_t" >&6; }
+if test $bash_cv_type_wint_t = yes; then
+
+$as_echo "#define HAVE_WINT_T 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for wcwidth broken with unicode combining characters" >&5
+$as_echo_n "checking for wcwidth broken with unicode combining characters... " >&6; }
+if ${bash_cv_wcwidth_broken+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  bash_cv_wcwidth_broken=no
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdio.h>
+
+#include <locale.h>
+#include <wchar.h>
+
+int
+main(c, v)
+int     c;
+char    **v;
+{
+        int     w;
+
+        setlocale(LC_ALL, "en_US.UTF-8");
+        w = wcwidth (0x0301);
+        exit (w == 0);  /* exit 0 if wcwidth broken */
+}
+
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  bash_cv_wcwidth_broken=yes
+else
+  bash_cv_wcwidth_broken=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_wcwidth_broken" >&5
+$as_echo "$bash_cv_wcwidth_broken" >&6; }
+if test "$bash_cv_wcwidth_broken" = yes; then
+
+$as_echo "#define WCWIDTH_BROKEN 1" >>confdefs.h
+
+fi
+
+if test "$am_cv_func_iconv" = yes; then
+	OLDLIBS="$LIBS"
+	LIBS="$LIBS $LIBINTL $LIBICONV"
+	for ac_func in locale_charset
+do :
+  ac_fn_c_check_func "$LINENO" "locale_charset" "ac_cv_func_locale_charset"
+if test "x$ac_cv_func_locale_charset" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_LOCALE_CHARSET 1
+_ACEOF
+
+fi
+done
+
+	LIBS="$OLDLIBS"
+fi
+
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of wchar_t" >&5
+$as_echo_n "checking size of wchar_t... " >&6; }
+if ${ac_cv_sizeof_wchar_t+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (wchar_t))" "ac_cv_sizeof_wchar_t"        "$ac_includes_default"; then :
+
+else
+  if test "$ac_cv_type_wchar_t" = yes; then
+     { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot compute sizeof (wchar_t)
+See \`config.log' for more details" "$LINENO" 5; }
+   else
+     ac_cv_sizeof_wchar_t=0
+   fi
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_wchar_t" >&5
+$as_echo "$ac_cv_sizeof_wchar_t" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_WCHAR_T $ac_cv_sizeof_wchar_t
+_ACEOF
+
+
+
+
+
+if test "$opt_static_link" != yes; then
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBDL 1
+_ACEOF
+
+  LIBS="-ldl $LIBS"
+
+fi
+
+for ac_func in dlopen dlclose dlsym
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+fi
+
+ac_fn_c_check_decl "$LINENO" "sys_siglist" "ac_cv_have_decl_sys_siglist" "#include <signal.h>
+/* NetBSD declares sys_siglist in unistd.h.  */
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif
+
+"
+if test "x$ac_cv_have_decl_sys_siglist" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_SYS_SIGLIST $ac_have_decl
+_ACEOF
+
+
+
+if test "$ac_cv_func_inet_aton" != 'yes'; then
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inet_aton" >&5
+$as_echo_n "checking for inet_aton... " >&6; }
+if ${bash_cv_func_inet_aton+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <sys/types.h>
+#include <netinet/in.h>
+#include <arpa/inet.h>
+struct in_addr ap;
+int
+main ()
+{
+ inet_aton("127.0.0.1", &ap);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  bash_cv_func_inet_aton=yes
+else
+  bash_cv_func_inet_aton=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_func_inet_aton" >&5
+$as_echo "$bash_cv_func_inet_aton" >&6; }
+if test $bash_cv_func_inet_aton = yes; then
+  $as_echo "#define HAVE_INET_ATON 1" >>confdefs.h
+
+else
+  case " $LIBOBJS " in
+  *" inet_aton.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS inet_aton.$ac_objext"
+ ;;
+esac
+
+fi
+
+fi
+
+case "$host_os" in
+irix4*)	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for getpwent in -lsun" >&5
+$as_echo_n "checking for getpwent in -lsun... " >&6; }
+if ${ac_cv_lib_sun_getpwent+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsun  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char getpwent ();
+int
+main ()
+{
+return getpwent ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_sun_getpwent=yes
+else
+  ac_cv_lib_sun_getpwent=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_sun_getpwent" >&5
+$as_echo "$ac_cv_lib_sun_getpwent" >&6; }
+if test "x$ac_cv_lib_sun_getpwent" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBSUN 1
+_ACEOF
+
+  LIBS="-lsun $LIBS"
+
+fi
+ ;;
+esac
+
+if test "$ac_cv_func_getpeername" = no; then
+
+if test "X$bash_cv_have_socklib" = "X"; then
+_bash_needmsg=
+else
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for socket library" >&5
+$as_echo_n "checking for socket library... " >&6; }
+_bash_needmsg=yes
+fi
+if ${bash_cv_have_socklib+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for getpeername in -lsocket" >&5
+$as_echo_n "checking for getpeername in -lsocket... " >&6; }
+if ${ac_cv_lib_socket_getpeername+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsocket -lnsl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char getpeername ();
+int
+main ()
+{
+return getpeername ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_socket_getpeername=yes
+else
+  ac_cv_lib_socket_getpeername=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_socket_getpeername" >&5
+$as_echo "$ac_cv_lib_socket_getpeername" >&6; }
+if test "x$ac_cv_lib_socket_getpeername" = xyes; then :
+  bash_cv_have_socklib=yes
+else
+  bash_cv_have_socklib=no
+fi
+
+fi
+
+if test "X$_bash_needmsg" = Xyes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_have_socklib" >&5
+$as_echo "$bash_cv_have_socklib" >&6; }
+  _bash_needmsg=
+fi
+if test $bash_cv_have_socklib = yes; then
+  # check for libnsl, add it to LIBS if present
+  if test "X$bash_cv_have_libnsl" = "X"; then
+    _bash_needmsg=
+  else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libnsl" >&5
+$as_echo_n "checking for libnsl... " >&6; }
+    _bash_needmsg=yes
+  fi
+  if ${bash_cv_have_libnsl+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for t_open in -lnsl" >&5
+$as_echo_n "checking for t_open in -lnsl... " >&6; }
+if ${ac_cv_lib_nsl_t_open+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lnsl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char t_open ();
+int
+main ()
+{
+return t_open ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_nsl_t_open=yes
+else
+  ac_cv_lib_nsl_t_open=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_nsl_t_open" >&5
+$as_echo "$ac_cv_lib_nsl_t_open" >&6; }
+if test "x$ac_cv_lib_nsl_t_open" = xyes; then :
+  bash_cv_have_libnsl=yes
+else
+  bash_cv_have_libnsl=no
+fi
+
+fi
+
+  if test "X$_bash_needmsg" = Xyes; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_have_libnsl" >&5
+$as_echo "$bash_cv_have_libnsl" >&6; }
+    _bash_needmsg=
+  fi
+  if test $bash_cv_have_libnsl = yes; then
+    LIBS="-lsocket -lnsl $LIBS"
+  else
+    LIBS="-lsocket $LIBS"
+  fi
+  $as_echo "#define HAVE_LIBSOCKET 1" >>confdefs.h
+
+  $as_echo "#define HAVE_GETPEERNAME 1" >>confdefs.h
+
+fi
+
+fi
+if test "$ac_cv_func_gethostbyname" = no; then
+	if test "X$bash_cv_have_gethostbyname" = "X"; then
+_bash_needmsg=yes
+else
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for gethostbyname in socket library" >&5
+$as_echo_n "checking for gethostbyname in socket library... " >&6; }
+_bash_needmsg=
+fi
+if ${bash_cv_have_gethostbyname+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <netdb.h>
+int
+main ()
+{
+ struct hostent *hp;
+  hp = gethostbyname("localhost");
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  bash_cv_have_gethostbyname=yes
+else
+  bash_cv_have_gethostbyname=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+
+fi
+
+if test "X$_bash_needmsg" = Xyes; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gethostbyname in socket library" >&5
+$as_echo_n "checking for gethostbyname in socket library... " >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_have_gethostbyname" >&5
+$as_echo "$bash_cv_have_gethostbyname" >&6; }
+if test "$bash_cv_have_gethostbyname" = yes; then
+$as_echo "#define HAVE_GETHOSTBYNAME 1" >>confdefs.h
+
+fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking type of array argument to getgroups" >&5
+$as_echo_n "checking type of array argument to getgroups... " >&6; }
+if ${ac_cv_type_getgroups+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ac_cv_type_getgroups=cross
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Thanks to Mike Rendell for this test.  */
+$ac_includes_default
+#define NGID 256
+#undef MAX
+#define MAX(x, y) ((x) > (y) ? (x) : (y))
+
+int
+main ()
+{
+  gid_t gidset[NGID];
+  int i, n;
+  union { gid_t gval; long int lval; }  val;
+
+  val.lval = -1;
+  for (i = 0; i < NGID; i++)
+    gidset[i] = val.gval;
+  n = getgroups (sizeof (gidset) / MAX (sizeof (int), sizeof (gid_t)) - 1,
+		 gidset);
+  /* Exit non-zero if getgroups seems to require an array of ints.  This
+     happens when gid_t is short int but getgroups modifies an array
+     of ints.  */
+  return n > 0 && gidset[n] != val.gval;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_type_getgroups=gid_t
+else
+  ac_cv_type_getgroups=int
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+if test $ac_cv_type_getgroups = cross; then
+        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <unistd.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "getgroups.*int.*gid_t" >/dev/null 2>&1; then :
+  ac_cv_type_getgroups=gid_t
+else
+  ac_cv_type_getgroups=int
+fi
+rm -f conftest*
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_getgroups" >&5
+$as_echo "$ac_cv_type_getgroups" >&6; }
+
+cat >>confdefs.h <<_ACEOF
+#define GETGROUPS_T $ac_cv_type_getgroups
+_ACEOF
+
+
+ac_fn_c_check_type "$LINENO" "off_t" "ac_cv_type_off_t" "$ac_includes_default"
+if test "x$ac_cv_type_off_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define off_t long int
+_ACEOF
+
+fi
+
+ac_fn_c_check_type "$LINENO" "mode_t" "ac_cv_type_mode_t" "$ac_includes_default"
+if test "x$ac_cv_type_mode_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define mode_t int
+_ACEOF
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for uid_t in sys/types.h" >&5
+$as_echo_n "checking for uid_t in sys/types.h... " >&6; }
+if ${ac_cv_type_uid_t+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "uid_t" >/dev/null 2>&1; then :
+  ac_cv_type_uid_t=yes
+else
+  ac_cv_type_uid_t=no
+fi
+rm -f conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_uid_t" >&5
+$as_echo "$ac_cv_type_uid_t" >&6; }
+if test $ac_cv_type_uid_t = no; then
+
+$as_echo "#define uid_t int" >>confdefs.h
+
+
+$as_echo "#define gid_t int" >>confdefs.h
+
+fi
+
+ac_fn_c_check_type "$LINENO" "pid_t" "ac_cv_type_pid_t" "$ac_includes_default"
+if test "x$ac_cv_type_pid_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define pid_t int
+_ACEOF
+
+fi
+
+ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default"
+if test "x$ac_cv_type_size_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define size_t unsigned int
+_ACEOF
+
+fi
+
+
+  ac_fn_c_check_type "$LINENO" "uintptr_t" "ac_cv_type_uintptr_t" "$ac_includes_default"
+if test "x$ac_cv_type_uintptr_t" = xyes; then :
+
+$as_echo "#define HAVE_UINTPTR_T 1" >>confdefs.h
+
+else
+  for ac_type in 'unsigned int' 'unsigned long int' \
+	'unsigned long long int'; do
+       cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(sizeof (void *) <= sizeof ($ac_type))];
+test_array [0] = 0;
+return test_array [0];
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+cat >>confdefs.h <<_ACEOF
+#define uintptr_t $ac_type
+_ACEOF
+
+	  ac_type=
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+       test -z "$ac_type" && break
+     done
+fi
+
+
+
+ac_fn_c_check_type "$LINENO" "ssize_t" "ac_cv_type_ssize_t" "$ac_includes_default"
+if test "x$ac_cv_type_ssize_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define ssize_t int
+_ACEOF
+
+fi
+
+ac_fn_c_check_type "$LINENO" "time_t" "ac_cv_type_time_t" "$ac_includes_default"
+if test "x$ac_cv_type_time_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define time_t long
+_ACEOF
+
+fi
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for long long" >&5
+$as_echo_n "checking for long long... " >&6; }
+if ${bash_cv_type_long_long+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+long long ll = 1; int i = 63;
+int
+main ()
+{
+
+long long llm = (long long) -1;
+return ll << i | ll >> i | llm / ll | llm % ll;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  bash_cv_type_long_long='long long'
+else
+  bash_cv_type_long_long='long'
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_type_long_long" >&5
+$as_echo "$bash_cv_type_long_long" >&6; }
+if test "$bash_cv_type_long_long" = 'long long'; then
+  $as_echo "#define HAVE_LONG_LONG 1" >>confdefs.h
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for unsigned long long" >&5
+$as_echo_n "checking for unsigned long long... " >&6; }
+if ${bash_cv_type_unsigned_long_long+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+unsigned long long ull = 1; int i = 63;
+int
+main ()
+{
+
+unsigned long long ullmax = (unsigned long long) -1;
+return ull << i | ull >> i | ullmax / ull | ullmax % ull;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  bash_cv_type_unsigned_long_long='unsigned long long'
+else
+  bash_cv_type_unsigned_long_long='unsigned long'
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_type_unsigned_long_long" >&5
+$as_echo "$bash_cv_type_unsigned_long_long" >&6; }
+if test "$bash_cv_type_unsigned_long_long" = 'unsigned long long'; then
+  $as_echo "#define HAVE_UNSIGNED_LONG_LONG 1" >>confdefs.h
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking return type of signal handlers" >&5
+$as_echo_n "checking return type of signal handlers... " >&6; }
+if ${ac_cv_type_signal+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <signal.h>
+
+int
+main ()
+{
+return *(signal (0, 0)) (0) == 1;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_type_signal=int
+else
+  ac_cv_type_signal=void
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_signal" >&5
+$as_echo "$ac_cv_type_signal" >&6; }
+
+cat >>confdefs.h <<_ACEOF
+#define RETSIGTYPE $ac_cv_type_signal
+_ACEOF
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sig_atomic_t in signal.h" >&5
+$as_echo_n "checking for sig_atomic_t in signal.h... " >&6; }
+if ${ac_cv_have_sig_atomic_t+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <signal.h>
+
+int
+main ()
+{
+ sig_atomic_t x;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_have_sig_atomic_t=yes
+else
+  ac_cv_have_sig_atomic_t=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_have_sig_atomic_t" >&5
+$as_echo "$ac_cv_have_sig_atomic_t" >&6; }
+if test "$ac_cv_have_sig_atomic_t" = "no"
+then
+    ac_fn_c_check_type "$LINENO" "sig_atomic_t" "ac_cv_type_sig_atomic_t" "$ac_includes_default"
+if test "x$ac_cv_type_sig_atomic_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define sig_atomic_t int
+_ACEOF
+
+fi
+
+fi
+
+
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of char" >&5
+$as_echo_n "checking size of char... " >&6; }
+if ${ac_cv_sizeof_char+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (char))" "ac_cv_sizeof_char"        "$ac_includes_default"; then :
+
+else
+  if test "$ac_cv_type_char" = yes; then
+     { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot compute sizeof (char)
+See \`config.log' for more details" "$LINENO" 5; }
+   else
+     ac_cv_sizeof_char=0
+   fi
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_char" >&5
+$as_echo "$ac_cv_sizeof_char" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_CHAR $ac_cv_sizeof_char
+_ACEOF
+
+
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of short" >&5
+$as_echo_n "checking size of short... " >&6; }
+if ${ac_cv_sizeof_short+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (short))" "ac_cv_sizeof_short"        "$ac_includes_default"; then :
+
+else
+  if test "$ac_cv_type_short" = yes; then
+     { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot compute sizeof (short)
+See \`config.log' for more details" "$LINENO" 5; }
+   else
+     ac_cv_sizeof_short=0
+   fi
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_short" >&5
+$as_echo "$ac_cv_sizeof_short" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_SHORT $ac_cv_sizeof_short
+_ACEOF
+
+
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of int" >&5
+$as_echo_n "checking size of int... " >&6; }
+if ${ac_cv_sizeof_int+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (int))" "ac_cv_sizeof_int"        "$ac_includes_default"; then :
+
+else
+  if test "$ac_cv_type_int" = yes; then
+     { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot compute sizeof (int)
+See \`config.log' for more details" "$LINENO" 5; }
+   else
+     ac_cv_sizeof_int=0
+   fi
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_int" >&5
+$as_echo "$ac_cv_sizeof_int" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_INT $ac_cv_sizeof_int
+_ACEOF
+
+
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long" >&5
+$as_echo_n "checking size of long... " >&6; }
+if ${ac_cv_sizeof_long+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (long))" "ac_cv_sizeof_long"        "$ac_includes_default"; then :
+
+else
+  if test "$ac_cv_type_long" = yes; then
+     { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot compute sizeof (long)
+See \`config.log' for more details" "$LINENO" 5; }
+   else
+     ac_cv_sizeof_long=0
+   fi
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_long" >&5
+$as_echo "$ac_cv_sizeof_long" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_LONG $ac_cv_sizeof_long
+_ACEOF
+
+
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of char *" >&5
+$as_echo_n "checking size of char *... " >&6; }
+if ${ac_cv_sizeof_char_p+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (char *))" "ac_cv_sizeof_char_p"        "$ac_includes_default"; then :
+
+else
+  if test "$ac_cv_type_char_p" = yes; then
+     { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot compute sizeof (char *)
+See \`config.log' for more details" "$LINENO" 5; }
+   else
+     ac_cv_sizeof_char_p=0
+   fi
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_char_p" >&5
+$as_echo "$ac_cv_sizeof_char_p" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_CHAR_P $ac_cv_sizeof_char_p
+_ACEOF
+
+
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of double" >&5
+$as_echo_n "checking size of double... " >&6; }
+if ${ac_cv_sizeof_double+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (double))" "ac_cv_sizeof_double"        "$ac_includes_default"; then :
+
+else
+  if test "$ac_cv_type_double" = yes; then
+     { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot compute sizeof (double)
+See \`config.log' for more details" "$LINENO" 5; }
+   else
+     ac_cv_sizeof_double=0
+   fi
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_double" >&5
+$as_echo "$ac_cv_sizeof_double" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_DOUBLE $ac_cv_sizeof_double
+_ACEOF
+
+
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long long" >&5
+$as_echo_n "checking size of long long... " >&6; }
+if ${ac_cv_sizeof_long_long+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (long long))" "ac_cv_sizeof_long_long"        "$ac_includes_default"; then :
+
+else
+  if test "$ac_cv_type_long_long" = yes; then
+     { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot compute sizeof (long long)
+See \`config.log' for more details" "$LINENO" 5; }
+   else
+     ac_cv_sizeof_long_long=0
+   fi
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_long_long" >&5
+$as_echo "$ac_cv_sizeof_long_long" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_LONG_LONG $ac_cv_sizeof_long_long
+_ACEOF
+
+
+
+ac_fn_c_check_type "$LINENO" "u_int" "ac_cv_type_u_int" "$ac_includes_default"
+if test "x$ac_cv_type_u_int" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define u_int unsigned int
+_ACEOF
+
+fi
+
+ac_fn_c_check_type "$LINENO" "u_long" "ac_cv_type_u_long" "$ac_includes_default"
+if test "x$ac_cv_type_u_long" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define u_long unsigned long
+_ACEOF
+
+fi
+
+
+
+if test "$ac_cv_sizeof_short" = 2; then
+  ac_fn_c_check_type "$LINENO" "bits16_t" "ac_cv_type_bits16_t" "$ac_includes_default"
+if test "x$ac_cv_type_bits16_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define bits16_t short
+_ACEOF
+
+fi
+
+elif test "$ac_cv_sizeof_char" = 2; then
+  ac_fn_c_check_type "$LINENO" "bits16_t" "ac_cv_type_bits16_t" "$ac_includes_default"
+if test "x$ac_cv_type_bits16_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define bits16_t char
+_ACEOF
+
+fi
+
+else
+  ac_fn_c_check_type "$LINENO" "bits16_t" "ac_cv_type_bits16_t" "$ac_includes_default"
+if test "x$ac_cv_type_bits16_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define bits16_t short
+_ACEOF
+
+fi
+
+fi
+
+
+if test "$ac_cv_sizeof_short" = 2; then
+  ac_fn_c_check_type "$LINENO" "u_bits16_t" "ac_cv_type_u_bits16_t" "$ac_includes_default"
+if test "x$ac_cv_type_u_bits16_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define u_bits16_t unsigned short
+_ACEOF
+
+fi
+
+elif test "$ac_cv_sizeof_char" = 2; then
+  ac_fn_c_check_type "$LINENO" "u_bits16_t" "ac_cv_type_u_bits16_t" "$ac_includes_default"
+if test "x$ac_cv_type_u_bits16_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define u_bits16_t unsigned char
+_ACEOF
+
+fi
+
+else
+  ac_fn_c_check_type "$LINENO" "u_bits16_t" "ac_cv_type_u_bits16_t" "$ac_includes_default"
+if test "x$ac_cv_type_u_bits16_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define u_bits16_t unsigned short
+_ACEOF
+
+fi
+
+fi
+
+
+if test "$ac_cv_sizeof_int" = 4; then
+  ac_fn_c_check_type "$LINENO" "bits32_t" "ac_cv_type_bits32_t" "$ac_includes_default"
+if test "x$ac_cv_type_bits32_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define bits32_t int
+_ACEOF
+
+fi
+
+elif test "$ac_cv_sizeof_long" = 4; then
+  ac_fn_c_check_type "$LINENO" "bits32_t" "ac_cv_type_bits32_t" "$ac_includes_default"
+if test "x$ac_cv_type_bits32_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define bits32_t long
+_ACEOF
+
+fi
+
+else
+  ac_fn_c_check_type "$LINENO" "bits32_t" "ac_cv_type_bits32_t" "$ac_includes_default"
+if test "x$ac_cv_type_bits32_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define bits32_t int
+_ACEOF
+
+fi
+
+fi
+
+
+if test "$ac_cv_sizeof_int" = 4; then
+  ac_fn_c_check_type "$LINENO" "u_bits32_t" "ac_cv_type_u_bits32_t" "$ac_includes_default"
+if test "x$ac_cv_type_u_bits32_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define u_bits32_t unsigned int
+_ACEOF
+
+fi
+
+elif test "$ac_cv_sizeof_long" = 4; then
+  ac_fn_c_check_type "$LINENO" "u_bits32_t" "ac_cv_type_u_bits32_t" "$ac_includes_default"
+if test "x$ac_cv_type_u_bits32_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define u_bits32_t unsigned long
+_ACEOF
+
+fi
+
+else
+  ac_fn_c_check_type "$LINENO" "u_bits32_t" "ac_cv_type_u_bits32_t" "$ac_includes_default"
+if test "x$ac_cv_type_u_bits32_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define u_bits32_t unsigned int
+_ACEOF
+
+fi
+
+fi
+
+
+if test "$ac_cv_sizeof_char_p" = 8; then
+  ac_fn_c_check_type "$LINENO" "bits64_t" "ac_cv_type_bits64_t" "$ac_includes_default"
+if test "x$ac_cv_type_bits64_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define bits64_t char *
+_ACEOF
+
+fi
+
+elif test "$ac_cv_sizeof_double" = 8; then
+  ac_fn_c_check_type "$LINENO" "bits64_t" "ac_cv_type_bits64_t" "$ac_includes_default"
+if test "x$ac_cv_type_bits64_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define bits64_t double
+_ACEOF
+
+fi
+
+elif test -n "$ac_cv_type_long_long" && test "$ac_cv_sizeof_long_long" = 8; then
+  ac_fn_c_check_type "$LINENO" "bits64_t" "ac_cv_type_bits64_t" "$ac_includes_default"
+if test "x$ac_cv_type_bits64_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define bits64_t long long
+_ACEOF
+
+fi
+
+elif test "$ac_cv_sizeof_long" = 8; then
+  ac_fn_c_check_type "$LINENO" "bits64_t" "ac_cv_type_bits64_t" "$ac_includes_default"
+if test "x$ac_cv_type_bits64_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define bits64_t long
+_ACEOF
+
+fi
+
+else
+  ac_fn_c_check_type "$LINENO" "bits64_t" "ac_cv_type_bits64_t" "$ac_includes_default"
+if test "x$ac_cv_type_bits64_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define bits64_t double
+_ACEOF
+
+fi
+
+fi
+
+
+
+if test "$ac_cv_sizeof_int" = "$ac_cv_sizeof_char_p"; then
+  ac_fn_c_check_type "$LINENO" "ptrdiff_t" "ac_cv_type_ptrdiff_t" "$ac_includes_default"
+if test "x$ac_cv_type_ptrdiff_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define ptrdiff_t int
+_ACEOF
+
+fi
+
+elif test "$ac_cv_sizeof_long" = "$ac_cv_sizeof_char_p"; then
+  ac_fn_c_check_type "$LINENO" "ptrdiff_t" "ac_cv_type_ptrdiff_t" "$ac_includes_default"
+if test "x$ac_cv_type_ptrdiff_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define ptrdiff_t long
+_ACEOF
+
+fi
+
+elif test "$ac_cv_type_long_long" = yes && test "$ac_cv_sizeof_long_long" = "$ac_cv_sizeof_char_p"; then
+  ac_fn_c_check_type "$LINENO" "ptrdiff_t" "ac_cv_type_ptrdiff_t" "$ac_includes_default"
+if test "x$ac_cv_type_ptrdiff_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define ptrdiff_t long long
+_ACEOF
+
+fi
+
+else
+  ac_fn_c_check_type "$LINENO" "ptrdiff_t" "ac_cv_type_ptrdiff_t" "$ac_includes_default"
+if test "x$ac_cv_type_ptrdiff_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define ptrdiff_t int
+_ACEOF
+
+fi
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stat file-mode macros are broken" >&5
+$as_echo_n "checking whether stat file-mode macros are broken... " >&6; }
+if ${ac_cv_header_stat_broken+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <sys/stat.h>
+
+#if defined S_ISBLK && defined S_IFDIR
+extern char c1[S_ISBLK (S_IFDIR) ? -1 : 1];
+#endif
+
+#if defined S_ISBLK && defined S_IFCHR
+extern char c2[S_ISBLK (S_IFCHR) ? -1 : 1];
+#endif
+
+#if defined S_ISLNK && defined S_IFREG
+extern char c3[S_ISLNK (S_IFREG) ? -1 : 1];
+#endif
+
+#if defined S_ISSOCK && defined S_IFREG
+extern char c4[S_ISSOCK (S_IFREG) ? -1 : 1];
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stat_broken=no
+else
+  ac_cv_header_stat_broken=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stat_broken" >&5
+$as_echo "$ac_cv_header_stat_broken" >&6; }
+if test $ac_cv_header_stat_broken = yes; then
+
+$as_echo "#define STAT_MACROS_BROKEN 1" >>confdefs.h
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether #! works in shell scripts" >&5
+$as_echo_n "checking whether #! works in shell scripts... " >&6; }
+if ${ac_cv_sys_interpreter+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  echo '#! /bin/cat
+exit 69
+' >conftest
+chmod u+x conftest
+(SHELL=/bin/sh; export SHELL; ./conftest >/dev/null 2>&1)
+if test $? -ne 69; then
+   ac_cv_sys_interpreter=yes
+else
+   ac_cv_sys_interpreter=no
+fi
+rm -f conftest
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_interpreter" >&5
+$as_echo "$ac_cv_sys_interpreter" >&6; }
+interpval=$ac_cv_sys_interpreter
+
+if test $ac_cv_sys_interpreter = yes; then
+$as_echo "#define HAVE_HASH_BANG_EXEC 1" >>confdefs.h
+
+fi
+
+if test "$ac_cv_func_lstat" = "no"; then
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for lstat" >&5
+$as_echo_n "checking for lstat... " >&6; }
+if ${bash_cv_func_lstat+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <sys/types.h>
+#include <sys/stat.h>
+
+int
+main ()
+{
+ lstat(".",(struct stat *)0);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  bash_cv_func_lstat=yes
+else
+  bash_cv_func_lstat=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_func_lstat" >&5
+$as_echo "$bash_cv_func_lstat" >&6; }
+if test $bash_cv_func_lstat = yes; then
+  $as_echo "#define HAVE_LSTAT 1" >>confdefs.h
+
+fi
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the ctype macros accept non-ascii characters" >&5
+$as_echo_n "checking whether the ctype macros accept non-ascii characters... " >&6; }
+if ${bash_cv_func_ctype_nonascii+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check ctype macros if cross compiling -- defaulting to no" >&5
+$as_echo "$as_me: WARNING: cannot check ctype macros if cross compiling -- defaulting to no" >&2;}
+    bash_cv_func_ctype_nonascii=no
+
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#ifdef HAVE_LOCALE_H
+#include <locale.h>
+#endif
+#include <stdio.h>
+#include <ctype.h>
+#include <stdlib.h>
+
+int
+main(c, v)
+int	c;
+char	*v[];
+{
+	char	*deflocale;
+	unsigned char x;
+	int	r1, r2;
+
+#ifdef HAVE_SETLOCALE
+	/* We take a shot here.  If that locale is not known, try the
+	   system default.  We try this one because '\342' (226) is
+	   known to be a printable character in that locale. */
+	deflocale = setlocale(LC_ALL, "en_US.ISO8859-1");
+	if (deflocale == 0)
+		deflocale = setlocale(LC_ALL, "");
+#endif
+
+	x = '\342';
+	r1 = isprint(x);
+	x -= 128;
+	r2 = isprint(x);
+	exit (r1 == 0 || r2 == 0);
+}
+
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  bash_cv_func_ctype_nonascii=yes
+else
+  bash_cv_func_ctype_nonascii=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_func_ctype_nonascii" >&5
+$as_echo "$bash_cv_func_ctype_nonascii" >&6; }
+if test $bash_cv_func_ctype_nonascii = yes; then
+$as_echo "#define CTYPE_NON_ASCII 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if dup2 fails to clear the close-on-exec flag" >&5
+$as_echo_n "checking if dup2 fails to clear the close-on-exec flag... " >&6; }
+if ${bash_cv_dup2_broken+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check dup2 if cross compiling -- defaulting to no" >&5
+$as_echo "$as_me: WARNING: cannot check dup2 if cross compiling -- defaulting to no" >&2;}
+     bash_cv_dup2_broken=no
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <sys/types.h>
+#include <fcntl.h>
+#include <stdlib.h>
+int
+main()
+{
+  int fd1, fd2, fl;
+  fd1 = open("/dev/null", 2);
+  if (fcntl(fd1, 2, 1) < 0)
+    exit(1);
+  fd2 = dup2(fd1, 1);
+  if (fd2 < 0)
+    exit(2);
+  fl = fcntl(fd2, 1, 0);
+  /* fl will be 1 if dup2 did not reset the close-on-exec flag. */
+  exit(fl != 1);
+}
+
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  bash_cv_dup2_broken=yes
+else
+  bash_cv_dup2_broken=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_dup2_broken" >&5
+$as_echo "$bash_cv_dup2_broken" >&6; }
+if test $bash_cv_dup2_broken = yes; then
+$as_echo "#define DUP2_BROKEN 1" >>confdefs.h
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether pgrps need synchronization" >&5
+$as_echo_n "checking whether pgrps need synchronization... " >&6; }
+if ${bash_cv_pgrp_pipe+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check pgrp synchronization if cross compiling -- defaulting to no" >&5
+$as_echo "$as_me: WARNING: cannot check pgrp synchronization if cross compiling -- defaulting to no" >&2;}
+    bash_cv_pgrp_pipe=no
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#ifdef HAVE_UNISTD_H
+#  include <unistd.h>
+#endif
+#ifdef HAVE_SYS_WAIT_H
+#  include <sys/wait.h>
+#endif
+#include <stdlib.h>
+int
+main()
+{
+# ifdef GETPGRP_VOID
+#  define getpgID()	getpgrp()
+# else
+#  define getpgID()	getpgrp(0)
+#  define setpgid(x,y)	setpgrp(x,y)
+# endif
+	int pid1, pid2, fds[2];
+	int status;
+	char ok;
+
+	switch (pid1 = fork()) {
+	  case -1:
+	    exit(1);
+	  case 0:
+	    setpgid(0, getpid());
+	    exit(0);
+	}
+	setpgid(pid1, pid1);
+
+	sleep(2);	/* let first child die */
+
+	if (pipe(fds) < 0)
+	  exit(2);
+
+	switch (pid2 = fork()) {
+	  case -1:
+	    exit(3);
+	  case 0:
+	    setpgid(0, pid1);
+	    ok = getpgID() == pid1;
+	    write(fds[1], &ok, 1);
+	    exit(0);
+	}
+	setpgid(pid2, pid1);
+
+	close(fds[1]);
+	if (read(fds[0], &ok, 1) != 1)
+	  exit(4);
+	wait(&status);
+	wait(&status);
+	exit(ok ? 0 : 5);
+}
+
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  bash_cv_pgrp_pipe=no
+else
+  bash_cv_pgrp_pipe=yes
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_pgrp_pipe" >&5
+$as_echo "$bash_cv_pgrp_pipe" >&6; }
+if test $bash_cv_pgrp_pipe = yes; then
+$as_echo "#define PGRP_PIPE 1" >>confdefs.h
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for type of signal functions" >&5
+$as_echo_n "checking for type of signal functions... " >&6; }
+if ${bash_cv_signal_vintage+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <signal.h>
+int
+main ()
+{
+
+    sigset_t ss;
+    struct sigaction sa;
+    sigemptyset(&ss); sigsuspend(&ss);
+    sigaction(SIGINT, &sa, (struct sigaction *) 0);
+    sigprocmask(SIG_BLOCK, &ss, (sigset_t *) 0);
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  bash_cv_signal_vintage=posix
+else
+
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <signal.h>
+int
+main ()
+{
+
+	int mask = sigmask(SIGINT);
+	sigsetmask(mask); sigblock(mask); sigpause(mask);
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  bash_cv_signal_vintage=4.2bsd
+else
+
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+	#include <signal.h>
+	RETSIGTYPE foo() { }
+int
+main ()
+{
+
+		int mask = sigmask(SIGINT);
+		sigset(SIGINT, foo); sigrelse(SIGINT);
+		sighold(SIGINT); sigpause(SIGINT);
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  bash_cv_signal_vintage=svr3
+else
+  bash_cv_signal_vintage=v7
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_signal_vintage" >&5
+$as_echo "$bash_cv_signal_vintage" >&6; }
+if test "$bash_cv_signal_vintage" = posix; then
+$as_echo "#define HAVE_POSIX_SIGNALS 1" >>confdefs.h
+
+elif test "$bash_cv_signal_vintage" = "4.2bsd"; then
+$as_echo "#define HAVE_BSD_SIGNALS 1" >>confdefs.h
+
+elif test "$bash_cv_signal_vintage" = svr3; then
+$as_echo "#define HAVE_USG_SIGHOLD 1" >>confdefs.h
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sys_errlist and sys_nerr" >&5
+$as_echo_n "checking for sys_errlist and sys_nerr... " >&6; }
+if ${bash_cv_sys_errlist+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <errno.h>
+int
+main ()
+{
+extern char *sys_errlist[];
+ extern int sys_nerr;
+ char *msg = sys_errlist[sys_nerr - 1];
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  bash_cv_sys_errlist=yes
+else
+  bash_cv_sys_errlist=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_sys_errlist" >&5
+$as_echo "$bash_cv_sys_errlist" >&6; }
+if test $bash_cv_sys_errlist = yes; then
+$as_echo "#define HAVE_SYS_ERRLIST 1" >>confdefs.h
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sys_siglist in system C library" >&5
+$as_echo_n "checking for sys_siglist in system C library... " >&6; }
+if ${bash_cv_sys_siglist+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check for sys_siglist if cross compiling -- defaulting to no" >&5
+$as_echo "$as_me: WARNING: cannot check for sys_siglist if cross compiling -- defaulting to no" >&2;}
+	 bash_cv_sys_siglist=no
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <sys/types.h>
+#include <signal.h>
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#include <stdlib.h>
+#if !HAVE_DECL_SYS_SIGLIST
+extern char *sys_siglist[];
+#endif
+int
+main()
+{
+char *msg = sys_siglist[2];
+exit(msg == 0);
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  bash_cv_sys_siglist=yes
+else
+  bash_cv_sys_siglist=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_sys_siglist" >&5
+$as_echo "$bash_cv_sys_siglist" >&6; }
+if test $bash_cv_sys_siglist = yes; then
+$as_echo "#define HAVE_SYS_SIGLIST 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for _sys_siglist in signal.h or unistd.h" >&5
+$as_echo_n "checking for _sys_siglist in signal.h or unistd.h... " >&6; }
+if ${bash_cv_decl_under_sys_siglist+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <sys/types.h>
+#include <signal.h>
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+int
+main ()
+{
+ char *msg = _sys_siglist[2];
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  bash_cv_decl_under_sys_siglist=yes
+else
+  bash_cv_decl_under_sys_siglist=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_decl_under_sys_siglist" >&5
+$as_echo "$bash_cv_decl_under_sys_siglist" >&6; }
+if test $bash_cv_decl_under_sys_siglist = yes; then
+$as_echo "#define UNDER_SYS_SIGLIST_DECLARED 1" >>confdefs.h
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for _sys_siglist in system C library" >&5
+$as_echo_n "checking for _sys_siglist in system C library... " >&6; }
+if ${bash_cv_under_sys_siglist+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check for _sys_siglist if cross compiling -- defaulting to no" >&5
+$as_echo "$as_me: WARNING: cannot check for _sys_siglist if cross compiling -- defaulting to no" >&2;}
+	 bash_cv_under_sys_siglist=no
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <sys/types.h>
+#include <signal.h>
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#include <stdlib.h>
+#ifndef UNDER_SYS_SIGLIST_DECLARED
+extern char *_sys_siglist[];
+#endif
+int
+main()
+{
+char *msg = (char *)_sys_siglist[2];
+exit(msg == 0);
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  bash_cv_under_sys_siglist=yes
+else
+  bash_cv_under_sys_siglist=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_under_sys_siglist" >&5
+$as_echo "$bash_cv_under_sys_siglist" >&6; }
+if test $bash_cv_under_sys_siglist = yes; then
+$as_echo "#define HAVE_UNDER_SYS_SIGLIST 1" >>confdefs.h
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether signal handlers are of type void" >&5
+$as_echo_n "checking whether signal handlers are of type void... " >&6; }
+if ${bash_cv_void_sighandler+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <signal.h>
+#ifdef signal
+#undef signal
+#endif
+#ifdef __cplusplus
+extern "C"
+#endif
+void (*signal ()) ();
+int
+main ()
+{
+int i;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  bash_cv_void_sighandler=yes
+else
+  bash_cv_void_sighandler=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_void_sighandler" >&5
+$as_echo "$bash_cv_void_sighandler" >&6; }
+if test $bash_cv_void_sighandler = yes; then
+$as_echo "#define VOID_SIGHANDLER 1" >>confdefs.h
+
+fi
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for clock_t" >&5
+$as_echo_n "checking for clock_t... " >&6; }
+if ${bash_cv_type_clock_t+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+#if HAVE_INTTYPES_H
+#include <inttypes.h>
+#endif
+#if HAVE_STDINT_H
+#include <stdint.h>
+#endif
+#include <sys/times.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "clock_t" >/dev/null 2>&1; then :
+  bash_cv_type_clock_t=yes
+else
+  bash_cv_type_clock_t=no
+fi
+rm -f conftest*
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_type_clock_t" >&5
+$as_echo "$bash_cv_type_clock_t" >&6; }
+
+if test $bash_cv_type_clock_t = no; then
+  cat >>confdefs.h <<_ACEOF
+#define clock_t long
+_ACEOF
+
+fi
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sigset_t" >&5
+$as_echo_n "checking for sigset_t... " >&6; }
+if ${bash_cv_type_sigset_t+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+#if HAVE_INTTYPES_H
+#include <inttypes.h>
+#endif
+#if HAVE_STDINT_H
+#include <stdint.h>
+#endif
+#include <signal.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "sigset_t" >/dev/null 2>&1; then :
+  bash_cv_type_sigset_t=yes
+else
+  bash_cv_type_sigset_t=no
+fi
+rm -f conftest*
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_type_sigset_t" >&5
+$as_echo "$bash_cv_type_sigset_t" >&6; }
+
+if test $bash_cv_type_sigset_t = no; then
+  cat >>confdefs.h <<_ACEOF
+#define sigset_t int
+_ACEOF
+
+fi
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sig_atomic_t" >&5
+$as_echo_n "checking for sig_atomic_t... " >&6; }
+if ${bash_cv_type_sig_atomic_t+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+#if HAVE_INTTYPES_H
+#include <inttypes.h>
+#endif
+#if HAVE_STDINT_H
+#include <stdint.h>
+#endif
+#include <signal.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "sig_atomic_t" >/dev/null 2>&1; then :
+  bash_cv_type_sig_atomic_t=yes
+else
+  bash_cv_type_sig_atomic_t=no
+fi
+rm -f conftest*
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_type_sig_atomic_t" >&5
+$as_echo "$bash_cv_type_sig_atomic_t" >&6; }
+
+if test $bash_cv_type_sig_atomic_t = no; then
+  cat >>confdefs.h <<_ACEOF
+#define sig_atomic_t int
+_ACEOF
+
+fi
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for quad_t" >&5
+$as_echo_n "checking for quad_t... " >&6; }
+if ${bash_cv_type_quad_t+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+#if HAVE_INTTYPES_H
+#include <inttypes.h>
+#endif
+#if HAVE_STDINT_H
+#include <stdint.h>
+#endif
+
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "quad_t" >/dev/null 2>&1; then :
+  bash_cv_type_quad_t=yes
+else
+  bash_cv_type_quad_t=no
+fi
+rm -f conftest*
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_type_quad_t" >&5
+$as_echo "$bash_cv_type_quad_t" >&6; }
+if test $bash_cv_type_quad_t = yes; then
+	$as_echo "#define HAVE_QUAD_T 1" >>confdefs.h
+
+	fi
+if test $bash_cv_type_quad_t = no; then
+  cat >>confdefs.h <<_ACEOF
+#define quad_t long
+_ACEOF
+
+fi
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for intmax_t" >&5
+$as_echo_n "checking for intmax_t... " >&6; }
+if ${bash_cv_type_intmax_t+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+#if HAVE_INTTYPES_H
+#include <inttypes.h>
+#endif
+#if HAVE_STDINT_H
+#include <stdint.h>
+#endif
+
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "intmax_t" >/dev/null 2>&1; then :
+  bash_cv_type_intmax_t=yes
+else
+  bash_cv_type_intmax_t=no
+fi
+rm -f conftest*
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_type_intmax_t" >&5
+$as_echo "$bash_cv_type_intmax_t" >&6; }
+
+if test $bash_cv_type_intmax_t = no; then
+  cat >>confdefs.h <<_ACEOF
+#define intmax_t $bash_cv_type_long_long
+_ACEOF
+
+fi
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for uintmax_t" >&5
+$as_echo_n "checking for uintmax_t... " >&6; }
+if ${bash_cv_type_uintmax_t+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+#if HAVE_INTTYPES_H
+#include <inttypes.h>
+#endif
+#if HAVE_STDINT_H
+#include <stdint.h>
+#endif
+
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "uintmax_t" >/dev/null 2>&1; then :
+  bash_cv_type_uintmax_t=yes
+else
+  bash_cv_type_uintmax_t=no
+fi
+rm -f conftest*
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_type_uintmax_t" >&5
+$as_echo "$bash_cv_type_uintmax_t" >&6; }
+
+if test $bash_cv_type_uintmax_t = no; then
+  cat >>confdefs.h <<_ACEOF
+#define uintmax_t $bash_cv_type_unsigned_long_long
+_ACEOF
+
+fi
+
+if test "$ac_cv_header_sys_socket_h" = "yes"; then
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for socklen_t" >&5
+$as_echo_n "checking for socklen_t... " >&6; }
+if ${bash_cv_type_socklen_t+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+#if HAVE_INTTYPES_H
+#include <inttypes.h>
+#endif
+#if HAVE_STDINT_H
+#include <stdint.h>
+#endif
+#include <sys/socket.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "socklen_t" >/dev/null 2>&1; then :
+  bash_cv_type_socklen_t=yes
+else
+  bash_cv_type_socklen_t=no
+fi
+rm -f conftest*
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_type_socklen_t" >&5
+$as_echo "$bash_cv_type_socklen_t" >&6; }
+if test $bash_cv_type_socklen_t = yes; then
+	$as_echo "#define HAVE_SOCKLEN_T 1" >>confdefs.h
+
+	fi
+if test $bash_cv_type_socklen_t = no; then
+  cat >>confdefs.h <<_ACEOF
+#define socklen_t unsigned int
+_ACEOF
+
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for size and type of struct rlimit fields" >&5
+$as_echo_n "checking for size and type of struct rlimit fields... " >&6; }
+if ${bash_cv_type_rlimit+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <sys/resource.h>
+int
+main ()
+{
+rlim_t xxx;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  bash_cv_type_rlimit=rlim_t
+else
+
+if test "$cross_compiling" = yes; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check quad_t if cross compiling -- defaulting to long" >&5
+$as_echo "$as_me: WARNING: cannot check quad_t if cross compiling -- defaulting to long" >&2;}
+         bash_cv_type_rlimit=long
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <sys/types.h>
+#include <sys/time.h>
+#include <sys/resource.h>
+#include <stdlib.h>
+int
+main()
+{
+#ifdef HAVE_QUAD_T
+  struct rlimit rl;
+  if (sizeof(rl.rlim_cur) == sizeof(quad_t))
+    exit(0);
+#endif
+  exit(1);
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  bash_cv_type_rlimit=quad_t
+else
+  bash_cv_type_rlimit=long
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_type_rlimit" >&5
+$as_echo "$bash_cv_type_rlimit" >&6; }
+if test $bash_cv_type_rlimit = quad_t; then
+$as_echo "#define RLIMTYPE quad_t" >>confdefs.h
+
+elif test $bash_cv_type_rlimit = rlim_t; then
+$as_echo "#define RLIMTYPE rlim_t" >>confdefs.h
+
+fi
+
+
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of intmax_t" >&5
+$as_echo_n "checking size of intmax_t... " >&6; }
+if ${ac_cv_sizeof_intmax_t+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (intmax_t))" "ac_cv_sizeof_intmax_t"        "$ac_includes_default"; then :
+
+else
+  if test "$ac_cv_type_intmax_t" = yes; then
+     { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot compute sizeof (intmax_t)
+See \`config.log' for more details" "$LINENO" 5; }
+   else
+     ac_cv_sizeof_intmax_t=0
+   fi
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_intmax_t" >&5
+$as_echo "$ac_cv_sizeof_intmax_t" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_INTMAX_T $ac_cv_sizeof_intmax_t
+_ACEOF
+
+
+
+
+ac_fn_c_check_member "$LINENO" "struct termios" "c_line" "ac_cv_member_struct_termios_c_line" "
+#include <sys/types.h>
+#include <termios.h>
+
+"
+if test "x$ac_cv_member_struct_termios_c_line" = xyes; then :
+  $as_echo "#define TERMIOS_LDISC 1" >>confdefs.h
+
+fi
+
+
+
+ac_fn_c_check_member "$LINENO" "struct termio" "c_line" "ac_cv_member_struct_termio_c_line" "
+#include <sys/types.h>
+#include <termio.h>
+
+"
+if test "x$ac_cv_member_struct_termio_c_line" = xyes; then :
+  $as_echo "#define TERMIO_LDISC 1" >>confdefs.h
+
+fi
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct dirent.d_ino" >&5
+$as_echo_n "checking for struct dirent.d_ino... " >&6; }
+if ${bash_cv_dirent_has_dino+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <stdio.h>
+#include <sys/types.h>
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif /* HAVE_UNISTD_H */
+#if defined(HAVE_DIRENT_H)
+# include <dirent.h>
+#else
+# define dirent direct
+# ifdef HAVE_SYS_NDIR_H
+#  include <sys/ndir.h>
+# endif /* SYSNDIR */
+# ifdef HAVE_SYS_DIR_H
+#  include <sys/dir.h>
+# endif /* SYSDIR */
+# ifdef HAVE_NDIR_H
+#  include <ndir.h>
+# endif
+#endif /* HAVE_DIRENT_H */
+
+int
+main ()
+{
+
+struct dirent d; int z; z = d.d_ino;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  bash_cv_dirent_has_dino=yes
+else
+  bash_cv_dirent_has_dino=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_dirent_has_dino" >&5
+$as_echo "$bash_cv_dirent_has_dino" >&6; }
+if test $bash_cv_dirent_has_dino = yes; then
+$as_echo "#define HAVE_STRUCT_DIRENT_D_INO 1" >>confdefs.h
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct dirent.d_fileno" >&5
+$as_echo_n "checking for struct dirent.d_fileno... " >&6; }
+if ${bash_cv_dirent_has_d_fileno+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <stdio.h>
+#include <sys/types.h>
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif /* HAVE_UNISTD_H */
+#if defined(HAVE_DIRENT_H)
+# include <dirent.h>
+#else
+# define dirent direct
+# ifdef HAVE_SYS_NDIR_H
+#  include <sys/ndir.h>
+# endif /* SYSNDIR */
+# ifdef HAVE_SYS_DIR_H
+#  include <sys/dir.h>
+# endif /* SYSDIR */
+# ifdef HAVE_NDIR_H
+#  include <ndir.h>
+# endif
+#endif /* HAVE_DIRENT_H */
+
+int
+main ()
+{
+
+struct dirent d; int z; z = d.d_fileno;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  bash_cv_dirent_has_d_fileno=yes
+else
+  bash_cv_dirent_has_d_fileno=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_dirent_has_d_fileno" >&5
+$as_echo "$bash_cv_dirent_has_d_fileno" >&6; }
+if test $bash_cv_dirent_has_d_fileno = yes; then
+$as_echo "#define HAVE_STRUCT_DIRENT_D_FILENO 1" >>confdefs.h
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct dirent.d_namlen" >&5
+$as_echo_n "checking for struct dirent.d_namlen... " >&6; }
+if ${bash_cv_dirent_has_d_namlen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <stdio.h>
+#include <sys/types.h>
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif /* HAVE_UNISTD_H */
+#if defined(HAVE_DIRENT_H)
+# include <dirent.h>
+#else
+# define dirent direct
+# ifdef HAVE_SYS_NDIR_H
+#  include <sys/ndir.h>
+# endif /* SYSNDIR */
+# ifdef HAVE_SYS_DIR_H
+#  include <sys/dir.h>
+# endif /* SYSDIR */
+# ifdef HAVE_NDIR_H
+#  include <ndir.h>
+# endif
+#endif /* HAVE_DIRENT_H */
+
+int
+main ()
+{
+
+struct dirent d; int z; z = d.d_namlen;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  bash_cv_dirent_has_d_namlen=yes
+else
+  bash_cv_dirent_has_d_namlen=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_dirent_has_d_namlen" >&5
+$as_echo "$bash_cv_dirent_has_d_namlen" >&6; }
+if test $bash_cv_dirent_has_d_namlen = yes; then
+$as_echo "#define HAVE_STRUCT_DIRENT_D_NAMLEN 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct winsize in sys/ioctl.h and termios.h" >&5
+$as_echo_n "checking for struct winsize in sys/ioctl.h and termios.h... " >&6; }
+if ${bash_cv_struct_winsize_header+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <sys/ioctl.h>
+int
+main ()
+{
+struct winsize x;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  bash_cv_struct_winsize_header=ioctl_h
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <termios.h>
+int
+main ()
+{
+struct winsize x;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  bash_cv_struct_winsize_header=termios_h
+else
+  bash_cv_struct_winsize_header=other
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+if test $bash_cv_struct_winsize_header = ioctl_h; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: sys/ioctl.h" >&5
+$as_echo "sys/ioctl.h" >&6; }
+  $as_echo "#define STRUCT_WINSIZE_IN_SYS_IOCTL 1" >>confdefs.h
+
+elif test $bash_cv_struct_winsize_header = termios_h; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: termios.h" >&5
+$as_echo "termios.h" >&6; }
+  $as_echo "#define STRUCT_WINSIZE_IN_TERMIOS 1" >>confdefs.h
+
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
+$as_echo "not found" >&6; }
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct timeval in sys/time.h and time.h" >&5
+$as_echo_n "checking for struct timeval in sys/time.h and time.h... " >&6; }
+if ${bash_cv_struct_timeval+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if HAVE_SYS_TIME_H
+		  #include <sys/time.h>
+		  #endif
+		  #include <time.h>
+
+int
+main ()
+{
+static struct timeval x; x.tv_sec = x.tv_usec;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  bash_cv_struct_timeval=yes
+else
+  bash_cv_struct_timeval=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_struct_timeval" >&5
+$as_echo "$bash_cv_struct_timeval" >&6; }
+if test $bash_cv_struct_timeval = yes; then
+  $as_echo "#define HAVE_TIMEVAL 1" >>confdefs.h
+
+fi
+
+ac_fn_c_check_member "$LINENO" "struct stat" "st_blocks" "ac_cv_member_struct_stat_st_blocks" "$ac_includes_default"
+if test "x$ac_cv_member_struct_stat_st_blocks" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_BLOCKS 1
+_ACEOF
+
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether struct tm is in sys/time.h or time.h" >&5
+$as_echo_n "checking whether struct tm is in sys/time.h or time.h... " >&6; }
+if ${ac_cv_struct_tm+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <time.h>
+
+int
+main ()
+{
+struct tm tm;
+				     int *p = &tm.tm_sec;
+				     return !p;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_struct_tm=time.h
+else
+  ac_cv_struct_tm=sys/time.h
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_struct_tm" >&5
+$as_echo "$ac_cv_struct_tm" >&6; }
+if test $ac_cv_struct_tm = sys/time.h; then
+
+$as_echo "#define TM_IN_SYS_TIME 1" >>confdefs.h
+
+fi
+
+ac_fn_c_check_member "$LINENO" "struct tm" "tm_zone" "ac_cv_member_struct_tm_tm_zone" "#include <sys/types.h>
+#include <$ac_cv_struct_tm>
+
+"
+if test "x$ac_cv_member_struct_tm_tm_zone" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_TM_TM_ZONE 1
+_ACEOF
+
+
+fi
+
+if test "$ac_cv_member_struct_tm_tm_zone" = yes; then
+
+$as_echo "#define HAVE_TM_ZONE 1" >>confdefs.h
+
+else
+  ac_fn_c_check_decl "$LINENO" "tzname" "ac_cv_have_decl_tzname" "#include <time.h>
+"
+if test "x$ac_cv_have_decl_tzname" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_TZNAME $ac_have_decl
+_ACEOF
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tzname" >&5
+$as_echo_n "checking for tzname... " >&6; }
+if ${ac_cv_var_tzname+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <time.h>
+#if !HAVE_DECL_TZNAME
+extern char *tzname[];
+#endif
+
+int
+main ()
+{
+return tzname[0][0];
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_var_tzname=yes
+else
+  ac_cv_var_tzname=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_var_tzname" >&5
+$as_echo "$ac_cv_var_tzname" >&6; }
+  if test $ac_cv_var_tzname = yes; then
+
+$as_echo "#define HAVE_TZNAME 1" >>confdefs.h
+
+  fi
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct timezone in sys/time.h and time.h" >&5
+$as_echo_n "checking for struct timezone in sys/time.h and time.h... " >&6; }
+if ${bash_cv_struct_timezone+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/time.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "struct timezone" >/dev/null 2>&1; then :
+  bash_cv_struct_timezone=yes
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <time.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "struct timezone" >/dev/null 2>&1; then :
+  bash_cv_struct_timezone=yes
+else
+  bash_cv_struct_timezone=no
+fi
+rm -f conftest*
+
+fi
+rm -f conftest*
+
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_struct_timezone" >&5
+$as_echo "$bash_cv_struct_timezone" >&6; }
+if test $bash_cv_struct_timezone = yes; then
+  $as_echo "#define HAVE_STRUCT_TIMEZONE 1" >>confdefs.h
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for offset of exit status in return status from wait" >&5
+$as_echo_n "checking for offset of exit status in return status from wait... " >&6; }
+if ${bash_cv_wexitstatus_offset+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check WEXITSTATUS offset if cross compiling -- defaulting to 0" >&5
+$as_echo "$as_me: WARNING: cannot check WEXITSTATUS offset if cross compiling -- defaulting to 0" >&2;}
+    bash_cv_wexitstatus_offset=0
+
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <stdlib.h>
+#include <unistd.h>
+
+#include <sys/wait.h>
+
+int
+main(c, v)
+     int c;
+     char **v;
+{
+  pid_t pid, p;
+  int s, i, n;
+
+  s = 0;
+  pid = fork();
+  if (pid == 0)
+    exit (42);
+
+  /* wait for the process */
+  p = wait(&s);
+  if (p != pid)
+    exit (255);
+
+  /* crack s */
+  for (i = 0; i < (sizeof(s) * 8); i++)
+    {
+      n = (s >> i) & 0xff;
+      if (n == 42)
+	exit (i);
+    }
+
+  exit (254);
+}
+
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  bash_cv_wexitstatus_offset=0
+else
+  bash_cv_wexitstatus_offset=$?
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+
+if test "$bash_cv_wexitstatus_offset" -gt 32 ; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: bad exit status from test program -- defaulting to 0" >&5
+$as_echo "$as_me: WARNING: bad exit status from test program -- defaulting to 0" >&2;}
+  bash_cv_wexitstatus_offset=0
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_wexitstatus_offset" >&5
+$as_echo "$bash_cv_wexitstatus_offset" >&6; }
+
+cat >>confdefs.h <<_ACEOF
+#define WEXITSTATUS_OFFSET $bash_cv_wexitstatus_offset
+_ACEOF
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct timespec in <time.h>" >&5
+$as_echo_n "checking for struct timespec in <time.h>... " >&6; }
+if ${bash_cv_sys_struct_timespec_in_time_h+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <time.h>
+
+int
+main ()
+{
+static struct timespec x; x.tv_sec = x.tv_nsec;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  bash_cv_sys_struct_timespec_in_time_h=yes
+else
+  bash_cv_sys_struct_timespec_in_time_h=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_sys_struct_timespec_in_time_h" >&5
+$as_echo "$bash_cv_sys_struct_timespec_in_time_h" >&6; }
+
+  HAVE_STRUCT_TIMESPEC=0
+  TIME_H_DEFINES_STRUCT_TIMESPEC=0
+  SYS_TIME_H_DEFINES_STRUCT_TIMESPEC=0
+  PTHREAD_H_DEFINES_STRUCT_TIMESPEC=0
+  if test $bash_cv_sys_struct_timespec_in_time_h = yes; then
+    $as_echo "#define HAVE_STRUCT_TIMESPEC 1" >>confdefs.h
+
+    $as_echo "#define TIME_H_DEFINES_STRUCT_TIMESPEC 1" >>confdefs.h
+
+    TIME_H_DEFINES_STRUCT_TIMESPEC=1
+  else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct timespec in <sys/time.h>" >&5
+$as_echo_n "checking for struct timespec in <sys/time.h>... " >&6; }
+if ${bash_cv_sys_struct_timespec_in_sys_time_h+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/time.h>
+
+int
+main ()
+{
+static struct timespec x; x.tv_sec = x.tv_nsec;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  bash_cv_sys_struct_timespec_in_sys_time_h=yes
+else
+  bash_cv_sys_struct_timespec_in_sys_time_h=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_sys_struct_timespec_in_sys_time_h" >&5
+$as_echo "$bash_cv_sys_struct_timespec_in_sys_time_h" >&6; }
+    if test $bash_cv_sys_struct_timespec_in_sys_time_h = yes; then
+      SYS_TIME_H_DEFINES_STRUCT_TIMESPEC=1
+      $as_echo "#define HAVE_STRUCT_TIMESPEC 1" >>confdefs.h
+
+      $as_echo "#define SYS_TIME_H_DEFINES_STRUCT_TIMESPEC 1" >>confdefs.h
+
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct timespec in <pthread.h>" >&5
+$as_echo_n "checking for struct timespec in <pthread.h>... " >&6; }
+if ${bash_cv_sys_struct_timespec_in_pthread_h+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <pthread.h>
+
+int
+main ()
+{
+static struct timespec x; x.tv_sec = x.tv_nsec;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  bash_cv_sys_struct_timespec_in_pthread_h=yes
+else
+  bash_cv_sys_struct_timespec_in_pthread_h=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_sys_struct_timespec_in_pthread_h" >&5
+$as_echo "$bash_cv_sys_struct_timespec_in_pthread_h" >&6; }
+      if test $bash_cv_sys_struct_timespec_in_pthread_h = yes; then
+        PTHREAD_H_DEFINES_STRUCT_TIMESPEC=1
+	$as_echo "#define HAVE_STRUCT_TIMESPEC 1" >>confdefs.h
+
+	$as_echo "#define PTHREAD_H_DEFINES_STRUCT_TIMESPEC 1" >>confdefs.h
+
+      fi
+    fi
+  fi
+
+
+
+
+
+
+
+
+
+  ac_fn_c_check_member "$LINENO" "struct stat" "st_atim.tv_nsec" "ac_cv_member_struct_stat_st_atim_tv_nsec" "#include <sys/types.h>
+     #include <sys/stat.h>
+"
+if test "x$ac_cv_member_struct_stat_st_atim_tv_nsec" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC 1
+_ACEOF
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether struct stat.st_atim is of type struct timespec" >&5
+$as_echo_n "checking whether struct stat.st_atim is of type struct timespec... " >&6; }
+if ${ac_cv_typeof_struct_stat_st_atim_is_struct_timespec+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+            #include <sys/types.h>
+            #include <sys/stat.h>
+            #if HAVE_SYS_TIME_H
+            # include <sys/time.h>
+            #endif
+            #include <time.h>
+            struct timespec ts;
+            struct stat st;
+
+int
+main ()
+{
+
+            st.st_atim = ts;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_typeof_struct_stat_st_atim_is_struct_timespec=yes
+else
+  ac_cv_typeof_struct_stat_st_atim_is_struct_timespec=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_typeof_struct_stat_st_atim_is_struct_timespec" >&5
+$as_echo "$ac_cv_typeof_struct_stat_st_atim_is_struct_timespec" >&6; }
+     if test $ac_cv_typeof_struct_stat_st_atim_is_struct_timespec = yes; then
+
+$as_echo "#define TYPEOF_STRUCT_STAT_ST_ATIM_IS_STRUCT_TIMESPEC 1" >>confdefs.h
+
+     fi
+else
+  ac_fn_c_check_member "$LINENO" "struct stat" "st_atimespec.tv_nsec" "ac_cv_member_struct_stat_st_atimespec_tv_nsec" "#include <sys/types.h>
+        #include <sys/stat.h>
+"
+if test "x$ac_cv_member_struct_stat_st_atimespec_tv_nsec" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC 1
+_ACEOF
+
+
+else
+  ac_fn_c_check_member "$LINENO" "struct stat" "st_atimensec" "ac_cv_member_struct_stat_st_atimensec" "#include <sys/types.h>
+           #include <sys/stat.h>
+"
+if test "x$ac_cv_member_struct_stat_st_atimensec" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_ATIMENSEC 1
+_ACEOF
+
+
+else
+  ac_fn_c_check_member "$LINENO" "struct stat" "st_atim.st__tim.tv_nsec" "ac_cv_member_struct_stat_st_atim_st__tim_tv_nsec" "#include <sys/types.h>
+              #include <sys/stat.h>
+"
+if test "x$ac_cv_member_struct_stat_st_atim_st__tim_tv_nsec" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_ATIM_ST__TIM_TV_NSEC 1
+_ACEOF
+
+
+fi
+
+fi
+
+fi
+
+fi
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sbrk" >&5
+$as_echo_n "checking for sbrk... " >&6; }
+  if ${ac_cv_func_sbrk+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <unistd.h>
+int
+main ()
+{
+ void *x = sbrk (4096);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_func_sbrk=yes
+else
+  ac_cv_func_sbrk=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_sbrk" >&5
+$as_echo "$ac_cv_func_sbrk" >&6; }
+  if test X$ac_cv_func_sbrk = Xyes; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working sbrk" >&5
+$as_echo_n "checking for working sbrk... " >&6; }
+if ${bash_cv_func_sbrk+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check working sbrk if cross-compiling" >&5
+$as_echo "$as_me: WARNING: cannot check working sbrk if cross-compiling" >&2;}
+    bash_cv_func_sbrk=yes
+
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <stdlib.h>
+#include <unistd.h>
+
+int
+main(int c, char **v)
+{
+	void *x;
+
+	x = sbrk (4096);
+	exit ((x == (void *)-1) ? 1 : 0);
+}
+
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  bash_cv_func_sbrk=yes
+else
+  bash_cv_func_snprintf=sbrk
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_func_sbrk" >&5
+$as_echo "$bash_cv_func_sbrk" >&6; }
+    if test $bash_cv_func_sbrk = no; then
+      ac_cv_func_sbrk=no
+    fi
+  fi
+  if test $ac_cv_func_sbrk = yes; then
+
+$as_echo "#define HAVE_SBRK 1" >>confdefs.h
+
+  fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for the existence of strsignal" >&5
+$as_echo_n "checking for the existence of strsignal... " >&6; }
+if ${bash_cv_have_strsignal+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <signal.h>
+#include <string.h>
+int
+main ()
+{
+char *s = (char *)strsignal(2);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  bash_cv_have_strsignal=yes
+else
+  bash_cv_have_strsignal=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_have_strsignal" >&5
+$as_echo "$bash_cv_have_strsignal" >&6; }
+if test $bash_cv_have_strsignal = yes; then
+$as_echo "#define HAVE_STRSIGNAL 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if opendir() opens non-directories" >&5
+$as_echo_n "checking if opendir() opens non-directories... " >&6; }
+if ${bash_cv_opendir_not_robust+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check opendir if cross compiling -- defaulting to no" >&5
+$as_echo "$as_me: WARNING: cannot check opendir if cross compiling -- defaulting to no" >&2;}
+     bash_cv_opendir_not_robust=no
+
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <stdio.h>
+#include <sys/types.h>
+#include <fcntl.h>
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif /* HAVE_UNISTD_H */
+#ifdef HAVE_SYS_STAT_H
+#include <sys/stat.h>
+#endif
+#if defined(HAVE_DIRENT_H)
+# include <dirent.h>
+#else
+# define dirent direct
+# ifdef HAVE_SYS_NDIR_H
+#  include <sys/ndir.h>
+# endif /* SYSNDIR */
+# ifdef HAVE_SYS_DIR_H
+#  include <sys/dir.h>
+# endif /* SYSDIR */
+# ifdef HAVE_NDIR_H
+#  include <ndir.h>
+# endif
+#endif /* HAVE_DIRENT_H */
+#include <stdlib.h>
+int
+main()
+{
+DIR *dir;
+int fd, err;
+err = mkdir("bash-aclocal", 0700);
+if (err < 0) {
+  perror("mkdir");
+  exit(1);
+}
+unlink("bash-aclocal/not_a_directory");
+fd = open("bash-aclocal/not_a_directory", O_WRONLY|O_CREAT|O_EXCL, 0666);
+write(fd, "\n", 1);
+close(fd);
+dir = opendir("bash-aclocal/not_a_directory");
+unlink("bash-aclocal/not_a_directory");
+rmdir("bash-aclocal");
+exit (dir == 0);
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  bash_cv_opendir_not_robust=yes
+else
+  bash_cv_opendir_not_robust=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_opendir_not_robust" >&5
+$as_echo "$bash_cv_opendir_not_robust" >&6; }
+if test $bash_cv_opendir_not_robust = yes; then
+$as_echo "#define OPENDIR_NOT_ROBUST 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ulimit can substitute for getdtablesize" >&5
+$as_echo_n "checking whether ulimit can substitute for getdtablesize... " >&6; }
+if ${bash_cv_ulimit_maxfds+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check ulimit if cross compiling -- defaulting to no" >&5
+$as_echo "$as_me: WARNING: cannot check ulimit if cross compiling -- defaulting to no" >&2;}
+    bash_cv_ulimit_maxfds=no
+
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <stdlib.h>
+#ifdef HAVE_ULIMIT_H
+#include <ulimit.h>
+#endif
+int
+main()
+{
+long maxfds = ulimit(4, 0L);
+exit (maxfds == -1L);
+}
+
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  bash_cv_ulimit_maxfds=yes
+else
+  bash_cv_ulimit_maxfds=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_ulimit_maxfds" >&5
+$as_echo "$bash_cv_ulimit_maxfds" >&6; }
+if test $bash_cv_ulimit_maxfds = yes; then
+$as_echo "#define ULIMIT_MAXFDS 1" >>confdefs.h
+
+fi
+
+
+
+
+
+
+
+
+  ac_fn_c_check_decl "$LINENO" "fpurge" "ac_cv_have_decl_fpurge" "#include <stdio.h>
+"
+if test "x$ac_cv_have_decl_fpurge" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_FPURGE $ac_have_decl
+_ACEOF
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking to see if getenv can be redefined" >&5
+$as_echo_n "checking to see if getenv can be redefined... " >&6; }
+if ${bash_cv_getenv_redef+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check getenv redefinition if cross compiling -- defaulting to yes" >&5
+$as_echo "$as_me: WARNING: cannot check getenv redefinition if cross compiling -- defaulting to yes" >&2;}
+    bash_cv_getenv_redef=yes
+
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#ifdef HAVE_UNISTD_H
+#  include <unistd.h>
+#endif
+#include <stdlib.h>
+#ifndef __STDC__
+#  ifndef const
+#    define const
+#  endif
+#endif
+char *
+getenv (name)
+#if defined (__linux__) || defined (__bsdi__) || defined (convex)
+     const char *name;
+#else
+     char const *name;
+#endif /* !__linux__ && !__bsdi__ && !convex */
+{
+return "42";
+}
+int
+main()
+{
+char *s;
+/* The next allows this program to run, but does not allow bash to link
+   when it redefines getenv.  I'm not really interested in figuring out
+   why not. */
+#if defined (NeXT)
+exit(1);
+#endif
+s = getenv("ABCDE");
+exit(s == 0);	/* force optimizer to leave getenv in */
+}
+
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  bash_cv_getenv_redef=yes
+else
+  bash_cv_getenv_redef=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_getenv_redef" >&5
+$as_echo "$bash_cv_getenv_redef" >&6; }
+if test $bash_cv_getenv_redef = yes; then
+$as_echo "#define CAN_REDEFINE_GETENV 1" >>confdefs.h
+
+fi
+
+if test "$ac_cv_func_getcwd" = "yes"; then
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if getcwd() will dynamically allocate memory with 0 size" >&5
+$as_echo_n "checking if getcwd() will dynamically allocate memory with 0 size... " >&6; }
+if ${bash_cv_getcwd_malloc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check whether getcwd allocates memory when cross-compiling -- defaulting to no" >&5
+$as_echo "$as_me: WARNING: cannot check whether getcwd allocates memory when cross-compiling -- defaulting to no" >&2;}
+    bash_cv_getcwd_malloc=no
+
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <stdio.h>
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#include <stdlib.h>
+
+int
+main()
+{
+	char	*xpwd;
+	xpwd = getcwd(0, 0);
+	exit (xpwd == 0);
+}
+
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  bash_cv_getcwd_malloc=yes
+else
+  bash_cv_getcwd_malloc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_getcwd_malloc" >&5
+$as_echo "$bash_cv_getcwd_malloc" >&6; }
+if test $bash_cv_getcwd_malloc = no; then
+$as_echo "#define GETCWD_BROKEN 1" >>confdefs.h
+
+case " $LIBOBJS " in
+  *" getcwd.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS getcwd.$ac_objext"
+ ;;
+esac
+
+fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for presence of POSIX-style sigsetjmp/siglongjmp" >&5
+$as_echo_n "checking for presence of POSIX-style sigsetjmp/siglongjmp... " >&6; }
+if ${bash_cv_func_sigsetjmp+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check for sigsetjmp/siglongjmp if cross-compiling -- defaulting to missing" >&5
+$as_echo "$as_me: WARNING: cannot check for sigsetjmp/siglongjmp if cross-compiling -- defaulting to missing" >&2;}
+     bash_cv_func_sigsetjmp=missing
+
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#include <sys/types.h>
+#include <signal.h>
+#include <setjmp.h>
+#include <stdlib.h>
+
+int
+main()
+{
+#if !defined (_POSIX_VERSION) || !defined (HAVE_POSIX_SIGNALS)
+exit (1);
+#else
+
+int code;
+sigset_t set, oset;
+sigjmp_buf xx;
+
+/* get the mask */
+sigemptyset(&set);
+sigemptyset(&oset);
+sigprocmask(SIG_BLOCK, (sigset_t *)NULL, &set);
+sigprocmask(SIG_BLOCK, (sigset_t *)NULL, &oset);
+
+/* save it */
+code = sigsetjmp(xx, 1);
+if (code)
+  exit(0);	/* could get sigmask and compare to oset here. */
+
+/* change it */
+sigaddset(&set, SIGINT);
+sigprocmask(SIG_BLOCK, &set, (sigset_t *)NULL);
+
+/* and siglongjmp */
+siglongjmp(xx, 10);
+exit(1);
+#endif
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  bash_cv_func_sigsetjmp=present
+else
+  bash_cv_func_sigsetjmp=missing
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_func_sigsetjmp" >&5
+$as_echo "$bash_cv_func_sigsetjmp" >&6; }
+if test $bash_cv_func_sigsetjmp = present; then
+$as_echo "#define HAVE_POSIX_SIGSETJMP 1" >>confdefs.h
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether or not strcoll and strcmp differ" >&5
+$as_echo_n "checking whether or not strcoll and strcmp differ... " >&6; }
+if ${bash_cv_func_strcoll_broken+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check strcoll if cross compiling -- defaulting to no" >&5
+$as_echo "$as_me: WARNING: cannot check strcoll if cross compiling -- defaulting to no" >&2;}
+    bash_cv_func_strcoll_broken=no
+
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <stdio.h>
+#if defined (HAVE_LOCALE_H)
+#include <locale.h>
+#endif
+#include <string.h>
+#include <stdlib.h>
+
+int
+main(c, v)
+int     c;
+char    *v[];
+{
+        int     r1, r2;
+        char    *deflocale, *defcoll;
+
+#ifdef HAVE_SETLOCALE
+        deflocale = setlocale(LC_ALL, "");
+	defcoll = setlocale(LC_COLLATE, "");
+#endif
+
+#ifdef HAVE_STRCOLL
+	/* These two values are taken from tests/glob-test. */
+        r1 = strcoll("abd", "aXd");
+#else
+	r1 = 0;
+#endif
+        r2 = strcmp("abd", "aXd");
+
+	/* These two should both be greater than 0.  It is permissible for
+	   a system to return different values, as long as the sign is the
+	   same. */
+
+        /* Exit with 1 (failure) if these two values are both > 0, since
+	   this tests whether strcoll(3) is broken with respect to strcmp(3)
+	   in the default locale. */
+	exit (r1 > 0 && r2 > 0);
+}
+
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  bash_cv_func_strcoll_broken=yes
+else
+  bash_cv_func_strcoll_broken=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_func_strcoll_broken" >&5
+$as_echo "$bash_cv_func_strcoll_broken" >&6; }
+if test $bash_cv_func_strcoll_broken = yes; then
+$as_echo "#define STRCOLL_BROKEN 1" >>confdefs.h
+
+fi
+
+
+
+
+
+  if test X$ac_cv_func_snprintf = Xyes; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for standard-conformant snprintf" >&5
+$as_echo_n "checking for standard-conformant snprintf... " >&6; }
+if ${bash_cv_func_snprintf+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check standard snprintf if cross-compiling" >&5
+$as_echo "$as_me: WARNING: cannot check standard snprintf if cross-compiling" >&2;}
+    bash_cv_func_snprintf=yes
+
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <stdio.h>
+#include <stdlib.h>
+
+int
+main()
+{
+  int n;
+  n = snprintf (0, 0, "%s", "0123456");
+  exit(n != 7);
+}
+
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  bash_cv_func_snprintf=yes
+else
+  bash_cv_func_snprintf=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_func_snprintf" >&5
+$as_echo "$bash_cv_func_snprintf" >&6; }
+    if test $bash_cv_func_snprintf = no; then
+      ac_cv_func_snprintf=no
+    fi
+  fi
+  if test $ac_cv_func_snprintf = no; then
+
+$as_echo "#define HAVE_SNPRINTF 0" >>confdefs.h
+
+  fi
+
+
+
+
+
+  if test X$ac_cv_func_vsnprintf = Xyes; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for standard-conformant vsnprintf" >&5
+$as_echo_n "checking for standard-conformant vsnprintf... " >&6; }
+if ${bash_cv_func_vsnprintf+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check standard vsnprintf if cross-compiling" >&5
+$as_echo "$as_me: WARNING: cannot check standard vsnprintf if cross-compiling" >&2;}
+    bash_cv_func_vsnprintf=yes
+
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#if HAVE_STDARG_H
+#include <stdarg.h>
+#else
+#include <varargs.h>
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+
+static int
+#if HAVE_STDARG_H
+foo(const char *fmt, ...)
+#else
+foo(format, va_alist)
+     const char *format;
+     va_dcl
+#endif
+{
+  va_list args;
+  int n;
+
+#if HAVE_STDARG_H
+  va_start(args, fmt);
+#else
+  va_start(args);
+#endif
+  n = vsnprintf(0, 0, fmt, args);
+  va_end (args);
+  return n;
+}
+
+int
+main()
+{
+  int n;
+  n = foo("%s", "0123456");
+  exit(n != 7);
+}
+
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  bash_cv_func_vsnprintf=yes
+else
+  bash_cv_func_vsnprintf=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_func_vsnprintf" >&5
+$as_echo "$bash_cv_func_vsnprintf" >&6; }
+    if test $bash_cv_func_vsnprintf = no; then
+      ac_cv_func_vsnprintf=no
+    fi
+  fi
+  if test $ac_cv_func_vsnprintf = no; then
+
+$as_echo "#define HAVE_VSNPRINTF 0" >>confdefs.h
+
+  fi
+
+
+
+if test "$ac_cv_func_putenv" = "yes"; then
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for standard-conformant putenv declaration" >&5
+$as_echo_n "checking for standard-conformant putenv declaration... " >&6; }
+if ${bash_cv_std_putenv+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+#ifndef __STDC__
+#  ifndef const
+#    define const
+#  endif
+#endif
+#ifdef PROTOTYPES
+extern int putenv (char *);
+#else
+extern int putenv ();
+#endif
+
+int
+main ()
+{
+return (putenv == 0);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  bash_cv_std_putenv=yes
+else
+  bash_cv_std_putenv=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_std_putenv" >&5
+$as_echo "$bash_cv_std_putenv" >&6; }
+if test $bash_cv_std_putenv = yes; then
+$as_echo "#define HAVE_STD_PUTENV 1" >>confdefs.h
+
+fi
+
+else
+$as_echo "#define HAVE_STD_PUTENV 1" >>confdefs.h
+
+fi
+if test "$ac_cv_func_unsetenv" = "yes"; then
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for standard-conformant unsetenv declaration" >&5
+$as_echo_n "checking for standard-conformant unsetenv declaration... " >&6; }
+if ${bash_cv_std_unsetenv+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+#ifndef __STDC__
+#  ifndef const
+#    define const
+#  endif
+#endif
+#ifdef PROTOTYPES
+extern int unsetenv (const char *);
+#else
+extern int unsetenv ();
+#endif
+
+int
+main ()
+{
+return (unsetenv == 0);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  bash_cv_std_unsetenv=yes
+else
+  bash_cv_std_unsetenv=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_std_unsetenv" >&5
+$as_echo "$bash_cv_std_unsetenv" >&6; }
+if test $bash_cv_std_unsetenv = yes; then
+$as_echo "#define HAVE_STD_UNSETENV 1" >>confdefs.h
+
+fi
+
+else
+$as_echo "#define HAVE_STD_UNSETENV 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for printf floating point output in hex notation" >&5
+$as_echo_n "checking for printf floating point output in hex notation... " >&6; }
+if ${bash_cv_printf_a_format+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check printf if cross compiling -- defaulting to no" >&5
+$as_echo "$as_me: WARNING: cannot check printf if cross compiling -- defaulting to no" >&2;}
+    bash_cv_printf_a_format=no
+
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+
+int
+main()
+{
+	double y = 0.0;
+	char abuf[1024];
+
+	sprintf(abuf, "%A", y);
+	exit(strchr(abuf, 'P') == (char *)0);
+}
+
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  bash_cv_printf_a_format=yes
+else
+  bash_cv_printf_a_format=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_printf_a_format" >&5
+$as_echo "$bash_cv_printf_a_format" >&6; }
+if test $bash_cv_printf_a_format = yes; then
+$as_echo "#define HAVE_PRINTF_A_FORMAT 1" >>confdefs.h
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether fnmatch can be used to check bracket equivalence classes" >&5
+$as_echo_n "checking whether fnmatch can be used to check bracket equivalence classes... " >&6; }
+if ${bash_cv_fnmatch_equiv_fallback+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check fnmatch if cross compiling -- defaulting to no" >&5
+$as_echo "$as_me: WARNING: cannot check fnmatch if cross compiling -- defaulting to no" >&2;}
+    bash_cv_fnmatch_equiv_fallback=no
+
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <stdlib.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <fnmatch.h>
+#include <locale.h>
+
+char *pattern = "[[=a=]]";
+
+/* char *string = "ä"; */
+unsigned char string[4] = { '\xc3', '\xa4', '\0' };
+
+int
+main (int c, char **v)
+{
+  setlocale (LC_ALL, "en_US.UTF-8");
+  if (fnmatch (pattern, (const char *)string, 0) != FNM_NOMATCH)
+    exit (0);
+  exit (1);
+}
+
+
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  bash_cv_fnmatch_equiv_fallback=yes
+else
+  bash_cv_fnmatch_equiv_fallback=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_fnmatch_equiv_fallback" >&5
+$as_echo "$bash_cv_fnmatch_equiv_fallback" >&6; }
+if test "$bash_cv_fnmatch_equiv_fallback" = "yes" ; then
+    bash_cv_fnmatch_equiv_value=1
+else
+    bash_cv_fnmatch_equiv_value=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define FNMATCH_EQUIV_FALLBACK $bash_cv_fnmatch_equiv_value
+_ACEOF
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if signal handlers must be reinstalled when invoked" >&5
+$as_echo_n "checking if signal handlers must be reinstalled when invoked... " >&6; }
+if ${bash_cv_must_reinstall_sighandlers+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check signal handling if cross compiling -- defaulting to no" >&5
+$as_echo "$as_me: WARNING: cannot check signal handling if cross compiling -- defaulting to no" >&2;}
+    bash_cv_must_reinstall_sighandlers=no
+
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <signal.h>
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#include <stdlib.h>
+
+typedef RETSIGTYPE sigfunc();
+
+volatile int nsigint;
+
+#ifdef HAVE_POSIX_SIGNALS
+sigfunc *
+set_signal_handler(sig, handler)
+     int sig;
+     sigfunc *handler;
+{
+  struct sigaction act, oact;
+  act.sa_handler = handler;
+  act.sa_flags = 0;
+  sigemptyset (&act.sa_mask);
+  sigemptyset (&oact.sa_mask);
+  sigaction (sig, &act, &oact);
+  return (oact.sa_handler);
+}
+#else
+#define set_signal_handler(s, h) signal(s, h)
+#endif
+
+RETSIGTYPE
+sigint(s)
+int s;
+{
+  nsigint++;
+}
+
+int
+main()
+{
+	nsigint = 0;
+	set_signal_handler(SIGINT, sigint);
+	kill((int)getpid(), SIGINT);
+	kill((int)getpid(), SIGINT);
+	exit(nsigint != 2);
+}
+
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  bash_cv_must_reinstall_sighandlers=no
+else
+  bash_cv_must_reinstall_sighandlers=yes
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_must_reinstall_sighandlers" >&5
+$as_echo "$bash_cv_must_reinstall_sighandlers" >&6; }
+if test $bash_cv_must_reinstall_sighandlers = yes; then
+$as_echo "#define MUST_REINSTALL_SIGHANDLERS 1" >>confdefs.h
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for presence of necessary job control definitions" >&5
+$as_echo_n "checking for presence of necessary job control definitions... " >&6; }
+if ${bash_cv_job_control_missing+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <sys/types.h>
+#ifdef HAVE_SYS_WAIT_H
+#include <sys/wait.h>
+#endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#include <signal.h>
+
+/* add more tests in here as appropriate */
+
+/* signal type */
+#if !defined (HAVE_POSIX_SIGNALS) && !defined (HAVE_BSD_SIGNALS)
+#error
+#endif
+
+/* signals and tty control. */
+#if !defined (SIGTSTP) || !defined (SIGSTOP) || !defined (SIGCONT)
+#error
+#endif
+
+/* process control */
+#if !defined (WNOHANG) || !defined (WUNTRACED)
+#error
+#endif
+
+/* Posix systems have tcgetpgrp and waitpid. */
+#if defined (_POSIX_VERSION) && !defined (HAVE_TCGETPGRP)
+#error
+#endif
+
+#if defined (_POSIX_VERSION) && !defined (HAVE_WAITPID)
+#error
+#endif
+
+/* Other systems have TIOCSPGRP/TIOCGPRGP and wait3. */
+#if !defined (_POSIX_VERSION) && !defined (HAVE_WAIT3)
+#error
+#endif
+
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  bash_cv_job_control_missing=present
+else
+  bash_cv_job_control_missing=missing
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_job_control_missing" >&5
+$as_echo "$bash_cv_job_control_missing" >&6; }
+if test $bash_cv_job_control_missing = missing; then
+$as_echo "#define JOB_CONTROL_MISSING 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for presence of named pipes" >&5
+$as_echo_n "checking for presence of named pipes... " >&6; }
+if ${bash_cv_sys_named_pipes+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check for named pipes if cross-compiling -- defaulting to missing" >&5
+$as_echo "$as_me: WARNING: cannot check for named pipes if cross-compiling -- defaulting to missing" >&2;}
+     bash_cv_sys_named_pipes=missing
+
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+
+/* Add more tests in here as appropriate. */
+int
+main()
+{
+int fd, err;
+
+#if defined (HAVE_MKFIFO)
+exit (0);
+#endif
+
+#if !defined (S_IFIFO) && (defined (_POSIX_VERSION) && !defined (S_ISFIFO))
+exit (1);
+#endif
+
+#if defined (NeXT)
+exit (1);
+#endif
+err = mkdir("bash-aclocal", 0700);
+if (err < 0) {
+  perror ("mkdir");
+  exit(1);
+}
+fd = mknod ("bash-aclocal/sh-np-autoconf", 0666 | S_IFIFO, 0);
+if (fd == -1) {
+  rmdir ("bash-aclocal");
+  exit (1);
+}
+close(fd);
+unlink ("bash-aclocal/sh-np-autoconf");
+rmdir ("bash-aclocal");
+exit(0);
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  bash_cv_sys_named_pipes=present
+else
+  bash_cv_sys_named_pipes=missing
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_sys_named_pipes" >&5
+$as_echo "$bash_cv_sys_named_pipes" >&6; }
+if test $bash_cv_sys_named_pipes = missing; then
+$as_echo "#define NAMED_PIPES_MISSING 1" >>confdefs.h
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether termios.h defines TIOCGWINSZ" >&5
+$as_echo_n "checking whether termios.h defines TIOCGWINSZ... " >&6; }
+if ${ac_cv_sys_tiocgwinsz_in_termios_h+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <termios.h>
+#ifdef TIOCGWINSZ
+  yes
+#endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "yes" >/dev/null 2>&1; then :
+  ac_cv_sys_tiocgwinsz_in_termios_h=yes
+else
+  ac_cv_sys_tiocgwinsz_in_termios_h=no
+fi
+rm -f conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_tiocgwinsz_in_termios_h" >&5
+$as_echo "$ac_cv_sys_tiocgwinsz_in_termios_h" >&6; }
+
+if test $ac_cv_sys_tiocgwinsz_in_termios_h != yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether sys/ioctl.h defines TIOCGWINSZ" >&5
+$as_echo_n "checking whether sys/ioctl.h defines TIOCGWINSZ... " >&6; }
+if ${ac_cv_sys_tiocgwinsz_in_sys_ioctl_h+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <sys/ioctl.h>
+#ifdef TIOCGWINSZ
+  yes
+#endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "yes" >/dev/null 2>&1; then :
+  ac_cv_sys_tiocgwinsz_in_sys_ioctl_h=yes
+else
+  ac_cv_sys_tiocgwinsz_in_sys_ioctl_h=no
+fi
+rm -f conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_tiocgwinsz_in_sys_ioctl_h" >&5
+$as_echo "$ac_cv_sys_tiocgwinsz_in_sys_ioctl_h" >&6; }
+
+  if test $ac_cv_sys_tiocgwinsz_in_sys_ioctl_h = yes; then
+
+$as_echo "#define GWINSZ_IN_SYS_IOCTL 1" >>confdefs.h
+
+  fi
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for TIOCSTAT in sys/ioctl.h" >&5
+$as_echo_n "checking for TIOCSTAT in sys/ioctl.h... " >&6; }
+if ${bash_cv_tiocstat_in_ioctl+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <sys/ioctl.h>
+int
+main ()
+{
+int x = TIOCSTAT;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  bash_cv_tiocstat_in_ioctl=yes
+else
+  bash_cv_tiocstat_in_ioctl=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_tiocstat_in_ioctl" >&5
+$as_echo "$bash_cv_tiocstat_in_ioctl" >&6; }
+if test $bash_cv_tiocstat_in_ioctl = yes; then
+$as_echo "#define TIOCSTAT_IN_SYS_IOCTL 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for FIONREAD in sys/ioctl.h" >&5
+$as_echo_n "checking for FIONREAD in sys/ioctl.h... " >&6; }
+if ${bash_cv_fionread_in_ioctl+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <sys/ioctl.h>
+int
+main ()
+{
+int x = FIONREAD;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  bash_cv_fionread_in_ioctl=yes
+else
+  bash_cv_fionread_in_ioctl=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_fionread_in_ioctl" >&5
+$as_echo "$bash_cv_fionread_in_ioctl" >&6; }
+if test $bash_cv_fionread_in_ioctl = yes; then
+$as_echo "#define FIONREAD_IN_SYS_IOCTL 1" >>confdefs.h
+
+fi
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether WCONTINUED flag to waitpid is unavailable or available but broken" >&5
+$as_echo_n "checking whether WCONTINUED flag to waitpid is unavailable or available but broken... " >&6; }
+if ${bash_cv_wcontinued_broken+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check WCONTINUED if cross compiling -- defaulting to no" >&5
+$as_echo "$as_me: WARNING: cannot check WCONTINUED if cross compiling -- defaulting to no" >&2;}
+    bash_cv_wcontinued_broken=no
+
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <unistd.h>
+#include <errno.h>
+#include <stdlib.h>
+
+#ifndef errno
+extern int errno;
+#endif
+int
+main()
+{
+	int	x;
+
+	x = waitpid(-1, (int *)0, WNOHANG|WCONTINUED);
+	if (x == -1 && errno == EINVAL)
+		exit (1);
+	else
+		exit (0);
+}
+
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  bash_cv_wcontinued_broken=no
+else
+  bash_cv_wcontinued_broken=yes
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_wcontinued_broken" >&5
+$as_echo "$bash_cv_wcontinued_broken" >&6; }
+if test $bash_cv_wcontinued_broken = yes; then
+$as_echo "#define WCONTINUED_BROKEN 1" >>confdefs.h
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for speed_t in sys/types.h" >&5
+$as_echo_n "checking for speed_t in sys/types.h... " >&6; }
+if ${bash_cv_speed_t_in_sys_types+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+int
+main ()
+{
+speed_t x;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  bash_cv_speed_t_in_sys_types=yes
+else
+  bash_cv_speed_t_in_sys_types=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_speed_t_in_sys_types" >&5
+$as_echo "$bash_cv_speed_t_in_sys_types" >&6; }
+if test $bash_cv_speed_t_in_sys_types = yes; then
+$as_echo "#define SPEED_T_IN_SYS_TYPES 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether getpw functions are declared in pwd.h" >&5
+$as_echo_n "checking whether getpw functions are declared in pwd.h... " >&6; }
+if ${bash_cv_getpw_declared+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <sys/types.h>
+#ifdef HAVE_UNISTD_H
+#  include <unistd.h>
+#endif
+#include <pwd.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "getpwuid" >/dev/null 2>&1; then :
+  bash_cv_getpw_declared=yes
+else
+  bash_cv_getpw_declared=no
+fi
+rm -f conftest*
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_getpw_declared" >&5
+$as_echo "$bash_cv_getpw_declared" >&6; }
+if test $bash_cv_getpw_declared = yes; then
+$as_echo "#define HAVE_GETPW_DECLS 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for unusable real-time signals due to large values" >&5
+$as_echo_n "checking for unusable real-time signals due to large values... " >&6; }
+if ${bash_cv_unusable_rtsigs+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check real-time signals if cross compiling -- defaulting to yes" >&5
+$as_echo "$as_me: WARNING: cannot check real-time signals if cross compiling -- defaulting to yes" >&2;}
+     bash_cv_unusable_rtsigs=yes
+
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <sys/types.h>
+#include <signal.h>
+#include <stdlib.h>
+
+#ifndef NSIG
+#  define NSIG 64
+#endif
+
+int
+main ()
+{
+  int n_sigs = 2 * NSIG;
+#ifdef SIGRTMIN
+  int rtmin = SIGRTMIN;
+#else
+  int rtmin = 0;
+#endif
+
+  exit(rtmin < n_sigs);
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  bash_cv_unusable_rtsigs=yes
+else
+  bash_cv_unusable_rtsigs=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_unusable_rtsigs" >&5
+$as_echo "$bash_cv_unusable_rtsigs" >&6; }
+if test $bash_cv_unusable_rtsigs = yes; then
+$as_echo "#define UNUSABLE_RT_SIGNALS 1" >>confdefs.h
+
+fi
+
+
+
+
+
+if test "$bash_cv_sys_siglist" = no && test "$bash_cv_under_sys_siglist" = no && test "$bash_cv_have_strsignal" = no; then
+  SIGLIST_O=siglist.o
+else
+  SIGLIST_O=
+fi
+
+
+
+case "$host_os" in
+hpux*)	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $host_os needs _KERNEL for RLIMIT defines" >&5
+$as_echo_n "checking whether $host_os needs _KERNEL for RLIMIT defines... " >&6; }
+if ${bash_cv_kernel_rlimit+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <sys/types.h>
+#include <sys/resource.h>
+
+int
+main ()
+{
+
+  int f;
+  f = RLIMIT_DATA;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  bash_cv_kernel_rlimit=no
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <sys/types.h>
+#define _KERNEL
+#include <sys/resource.h>
+#undef _KERNEL
+
+int
+main ()
+{
+
+	int f;
+        f = RLIMIT_DATA;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  bash_cv_kernel_rlimit=yes
+else
+  bash_cv_kernel_rlimit=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_kernel_rlimit" >&5
+$as_echo "$bash_cv_kernel_rlimit" >&6; }
+if test $bash_cv_kernel_rlimit = yes; then
+$as_echo "#define RLIMIT_NEEDS_KERNEL 1" >>confdefs.h
+
+fi
+ ;;
+esac
+
+if test "$opt_readline" = yes; then
+case "$host_os" in
+aix*)	prefer_curses=yes ;;
+esac
+
+if test "X$bash_cv_termcap_lib" = "X"; then
+_bash_needmsg=yes
+else
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking which library has the termcap functions" >&5
+$as_echo_n "checking which library has the termcap functions... " >&6; }
+_bash_needmsg=
+fi
+if ${bash_cv_termcap_lib+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_fn_c_check_func "$LINENO" "tgetent" "ac_cv_func_tgetent"
+if test "x$ac_cv_func_tgetent" = xyes; then :
+  bash_cv_termcap_lib=libc
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -ltermcap" >&5
+$as_echo_n "checking for tgetent in -ltermcap... " >&6; }
+if ${ac_cv_lib_termcap_tgetent+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ltermcap  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char tgetent ();
+int
+main ()
+{
+return tgetent ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_termcap_tgetent=yes
+else
+  ac_cv_lib_termcap_tgetent=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_termcap_tgetent" >&5
+$as_echo "$ac_cv_lib_termcap_tgetent" >&6; }
+if test "x$ac_cv_lib_termcap_tgetent" = xyes; then :
+  bash_cv_termcap_lib=libtermcap
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -ltinfo" >&5
+$as_echo_n "checking for tgetent in -ltinfo... " >&6; }
+if ${ac_cv_lib_tinfo_tgetent+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ltinfo  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char tgetent ();
+int
+main ()
+{
+return tgetent ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_tinfo_tgetent=yes
+else
+  ac_cv_lib_tinfo_tgetent=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_tinfo_tgetent" >&5
+$as_echo "$ac_cv_lib_tinfo_tgetent" >&6; }
+if test "x$ac_cv_lib_tinfo_tgetent" = xyes; then :
+  bash_cv_termcap_lib=libtinfo
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -lcurses" >&5
+$as_echo_n "checking for tgetent in -lcurses... " >&6; }
+if ${ac_cv_lib_curses_tgetent+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lcurses  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char tgetent ();
+int
+main ()
+{
+return tgetent ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_curses_tgetent=yes
+else
+  ac_cv_lib_curses_tgetent=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_curses_tgetent" >&5
+$as_echo "$ac_cv_lib_curses_tgetent" >&6; }
+if test "x$ac_cv_lib_curses_tgetent" = xyes; then :
+  bash_cv_termcap_lib=libcurses
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -lncurses" >&5
+$as_echo_n "checking for tgetent in -lncurses... " >&6; }
+if ${ac_cv_lib_ncurses_tgetent+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lncurses  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char tgetent ();
+int
+main ()
+{
+return tgetent ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_ncurses_tgetent=yes
+else
+  ac_cv_lib_ncurses_tgetent=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ncurses_tgetent" >&5
+$as_echo "$ac_cv_lib_ncurses_tgetent" >&6; }
+if test "x$ac_cv_lib_ncurses_tgetent" = xyes; then :
+  bash_cv_termcap_lib=libncurses
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -lncursesw" >&5
+$as_echo_n "checking for tgetent in -lncursesw... " >&6; }
+if ${ac_cv_lib_ncursesw_tgetent+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lncursesw  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char tgetent ();
+int
+main ()
+{
+return tgetent ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_ncursesw_tgetent=yes
+else
+  ac_cv_lib_ncursesw_tgetent=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ncursesw_tgetent" >&5
+$as_echo "$ac_cv_lib_ncursesw_tgetent" >&6; }
+if test "x$ac_cv_lib_ncursesw_tgetent" = xyes; then :
+  bash_cv_termcap_lib=libncursesw
+else
+  bash_cv_termcap_lib=gnutermcap
+fi
+
+fi
+
+fi
+
+fi
+
+fi
+
+fi
+
+fi
+
+if test "X$_bash_needmsg" = "Xyes"; then
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking which library has the termcap functions" >&5
+$as_echo_n "checking which library has the termcap functions... " >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: using $bash_cv_termcap_lib" >&5
+$as_echo "using $bash_cv_termcap_lib" >&6; }
+if test $bash_cv_termcap_lib = gnutermcap && test -z "$prefer_curses"; then
+LDFLAGS="$LDFLAGS -L./lib/termcap"
+TERMCAP_LIB="./lib/termcap/libtermcap.a"
+TERMCAP_DEP="./lib/termcap/libtermcap.a"
+elif test $bash_cv_termcap_lib = libtermcap && test -z "$prefer_curses"; then
+TERMCAP_LIB=-ltermcap
+TERMCAP_DEP=
+elif test $bash_cv_termcap_lib = libtinfo; then
+TERMCAP_LIB=-ltinfo
+TERMCAP_DEP=
+elif test $bash_cv_termcap_lib = libncurses; then
+TERMCAP_LIB=-lncurses
+TERMCAP_DEP=
+elif test $bash_cv_termcap_lib = libc; then
+TERMCAP_LIB=
+TERMCAP_DEP=
+else
+TERMCAP_LIB=-lcurses
+TERMCAP_DEP=
+fi
+
+fi
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether /dev/fd is available" >&5
+$as_echo_n "checking whether /dev/fd is available... " >&6; }
+if ${bash_cv_dev_fd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  bash_cv_dev_fd=""
+if test -d /dev/fd  && (exec test -r /dev/fd/0 < /dev/null) ; then
+# check for systems like FreeBSD 5 that only provide /dev/fd/[012]
+   if (exec test -r /dev/fd/3 3</dev/null) ; then
+     bash_cv_dev_fd=standard
+   else
+     bash_cv_dev_fd=absent
+   fi
+fi
+if test -z "$bash_cv_dev_fd" ; then
+  if test -d /proc/self/fd && (exec test -r /proc/self/fd/0 < /dev/null) ; then
+    bash_cv_dev_fd=whacky
+  else
+    bash_cv_dev_fd=absent
+  fi
+fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_dev_fd" >&5
+$as_echo "$bash_cv_dev_fd" >&6; }
+if test $bash_cv_dev_fd = "standard"; then
+  $as_echo "#define HAVE_DEV_FD 1" >>confdefs.h
+
+  $as_echo "#define DEV_FD_PREFIX \"/dev/fd/\"" >>confdefs.h
+
+elif test $bash_cv_dev_fd = "whacky"; then
+  $as_echo "#define HAVE_DEV_FD 1" >>confdefs.h
+
+  $as_echo "#define DEV_FD_PREFIX \"/proc/self/fd/\"" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether /dev/stdin stdout stderr are available" >&5
+$as_echo_n "checking whether /dev/stdin stdout stderr are available... " >&6; }
+if ${bash_cv_dev_stdin+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if (exec test -r /dev/stdin < /dev/null) ; then
+   bash_cv_dev_stdin=present
+ else
+   bash_cv_dev_stdin=absent
+ fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_dev_stdin" >&5
+$as_echo "$bash_cv_dev_stdin" >&6; }
+if test $bash_cv_dev_stdin = "present"; then
+  $as_echo "#define HAVE_DEV_STDIN 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for default mail directory" >&5
+$as_echo_n "checking for default mail directory... " >&6; }
+if ${bash_cv_mail_dir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -d /var/mail; then
+   bash_cv_mail_dir=/var/mail
+ elif test -d /var/spool/mail; then
+   bash_cv_mail_dir=/var/spool/mail
+ elif test -d /usr/mail; then
+   bash_cv_mail_dir=/usr/mail
+ elif test -d /usr/spool/mail; then
+   bash_cv_mail_dir=/usr/spool/mail
+ else
+   bash_cv_mail_dir=unknown
+ fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_mail_dir" >&5
+$as_echo "$bash_cv_mail_dir" >&6; }
+cat >>confdefs.h <<_ACEOF
+#define DEFAULT_MAIL_DIRECTORY "$bash_cv_mail_dir"
+_ACEOF
+
+
+
+if test "$bash_cv_job_control_missing" = missing; then
+	opt_job_control=no
+fi
+
+if test "$opt_job_control" = yes; then
+$as_echo "#define JOB_CONTROL 1" >>confdefs.h
+
+JOBS_O=jobs.o
+else
+JOBS_O=nojobs.o
+fi
+
+
+
+
+LOCAL_DEFS=-DSHELL
+
+
+case "${host_os}" in
+sysv4.2*)	$as_echo "#define SVR4_2 1" >>confdefs.h
+
+		$as_echo "#define SVR4 1" >>confdefs.h
+ ;;
+sysv4*)		$as_echo "#define SVR4 1" >>confdefs.h
+ ;;
+sysv5*)		$as_echo "#define SVR5 1" >>confdefs.h
+ ;;
+hpux9*)		LOCAL_CFLAGS="-DHPUX9 -DHPUX -DTGETENT_BROKEN -DTGETFLAG_BROKEN" ;;
+hpux*)		LOCAL_CFLAGS="-DHPUX -DTGETENT_BROKEN -DTGETFLAG_BROKEN" ;;
+dgux*)		LOCAL_CFLAGS=-D_DGUX_SOURCE; LOCAL_LIBS=-ldgc ;;
+isc*)		LOCAL_CFLAGS=-Disc386 ;;
+rhapsody*)	LOCAL_CFLAGS=-DRHAPSODY ;;
+darwin*)	LOCAL_CFLAGS=-DMACOSX ;;
+sco3.2v5*)	LOCAL_CFLAGS="-b elf -DWAITPID_BROKEN -DPATH_MAX=1024" ;;
+sco3.2v4*)	LOCAL_CFLAGS="-DMUST_UNBLOCK_CHLD -DPATH_MAX=1024" ;;
+sco3.2*)	LOCAL_CFLAGS=-DMUST_UNBLOCK_CHLD ;;
+sunos4*)	LOCAL_CFLAGS=-DSunOS4 ;;
+solaris2.5*)	LOCAL_CFLAGS="-DSunOS5 -DSOLARIS" ;;
+solaris2.8*)	LOCAL_CFLAGS=-DSOLARIS  ;;
+solaris2.9*)	LOCAL_CFLAGS=-DSOLARIS  ;;
+solaris2.10*)	LOCAL_CFLAGS=-DSOLARIS  ;;
+solaris2*)	LOCAL_CFLAGS=-DSOLARIS ;;
+lynxos*)	LOCAL_CFLAGS=-DRECYCLES_PIDS ;;
+linux*)		LOCAL_LDFLAGS=-rdynamic		 # allow dynamic loading
+		case "`uname -r`" in
+		1.*|2.[0123]*)	: ;;
+		*)	$as_echo "#define PGRP_PIPE 1" >>confdefs.h
+ ;;
+		esac ;;
+netbsd*|openbsd*)	LOCAL_CFLAGS="-DDEV_FD_STAT_BROKEN" ;;
+freebsd*)	LOCAL_CFLAGS='-DHEREDOC_PIPESIZE=4096' ;;
+*qnx[67]*)	LOCAL_LIBS="-lncurses" ;;
+*qnx*)		LOCAL_CFLAGS="-Dqnx -F -3s" LOCAL_LDFLAGS="-3s" LOCAL_LIBS="-lunix -lncurses" ;;
+powerux*)	LOCAL_LIBS="-lgen" ;;
+cygwin*)	LOCAL_CFLAGS=-DRECYCLES_PIDS ;;
+opennt*|interix*) LOCAL_CFLAGS="-DNO_MAIN_ENV_ARG -DBROKEN_DIRENT_D_INO -D_POSIX_SOURCE -D_ALL_SOURCE -DRECYCLES_PIDS" ;;
+*openstep*)	LOCAL_CFLAGS="-D__APPLE_CC__" ;;
+esac
+
+case "${host_os}-${CC}" in
+aix4.2*-*gcc*)	LOCAL_LDFLAGS="-Xlinker -bexpall -Xlinker -brtl" ;;
+aix4.2*)	LOCAL_LDFLAGS="-bexpall -brtl" ;;
+bsdi4*-*gcc*)	LOCAL_LDFLAGS="-rdynamic" ;;	# allow dynamic loading, like Linux
+bsdi5*-*gcc*)	LOCAL_LDFLAGS="-rdynamic" ;;	# allow dynamic loading, like Linux
+hpux11*-gcc*)	LOCAL_LDFLAGS="-Wl,-E" ;;	# allow dynamic loading
+esac
+
+case "${host_os}" in
+freebsd[3-9]*)
+		if test -x /usr/bin/objformat && test "`/usr/bin/objformat`" = "elf" ; then
+			LOCAL_LDFLAGS=-rdynamic # allow dynamic loading
+		fi ;;
+freebsdelf*)	LOCAL_LDFLAGS=-rdynamic ;;	# allow dynamic loading
+dragonfly*)	LOCAL_LDFLAGS=-rdynamic ;;	# allow dynamic loading
+esac
+
+case "$host_cpu" in
+*cray*)		LOCAL_CFLAGS="-DCRAY" ;; # shell var so config.h can use it
+esac
+
+case "$host_cpu-$host_os" in
+ibmrt-*bsd4*)	LOCAL_CFLAGS="-ma -U__STDC__" ;;
+esac
+
+case "$host_cpu-$host_vendor-$host_os" in
+m88k-motorola-sysv3)	LOCAL_CFLAGS=-DWAITPID_BROKEN ;;
+mips-pyramid-sysv4)	LOCAL_CFLAGS=-Xa ;;
+esac
+
+# turn off paren warnings in gcc
+CFLAGS="$CFLAGS ${STYLE_CFLAGS}"
+
+#
+# Shared object configuration section.  These values are generated by
+# ${srcdir}/support/shobj-conf
+#
+if test "$ac_cv_func_dlopen" = "yes" && test -f ${srcdir}/support/shobj-conf
+then
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking shared object configuration for loadable builtins" >&5
+$as_echo_n "checking shared object configuration for loadable builtins... " >&6; }
+	eval `${CONFIG_SHELL-/bin/sh} ${srcdir}/support/shobj-conf -C "${CC}" -c "${host_cpu}" -o "${host_os}" -v "${host_vendor}"`
+
+
+
+
+
+
+
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $SHOBJ_STATUS" >&5
+$as_echo "$SHOBJ_STATUS" >&6; }
+else
+	SHOBJ_STATUS=unsupported
+
+fi
+
+# try to create a directory tree if the source is elsewhere
+# this should be packaged into a script accessible via ${srcdir}/support
+case "$srcdir" in
+.)	;;
+*)	for d in doc tests support lib examples; do	# dirs
+		test -d $d || mkdir $d
+	done
+	for ld in readline glob tilde malloc sh termcap; do	# libdirs
+		test -d lib/$ld || mkdir lib/$ld
+	done
+	test -d examples/loadables || mkdir examples/loadables	# loadable builtins
+	test -d examples/loadables/perl || mkdir examples/loadables/perl
+	;;
+esac
+
+BUILD_DIR=`pwd`
+case "$BUILD_DIR" in
+*\ *)	BUILD_DIR=`echo "$BUILD_DIR" | sed 's: :\\\\ :g'` ;;
+*)	;;
+esac
+
+if test -z "$localedir"; then
+	localedir='${datarootdir}/locale'
+fi
+if test -z "$datarootdir"; then
+	datarootdir='${prefix}/share'
+fi
+
+
+
+
+
+
+# Some versions of autoconf don't substitute these automatically
+
+
+
+# directory where we install dynamically loadable builtins
+if test -z "$loadablesdir"; then
+	loadablesdir='${libdir}/bash'
+fi
+
+if test -z "$headersdir"; then
+	headersdir='$(includedir)/$(PACKAGE_NAME)'
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#AC_SUBST(ALLOCA_SOURCE)
+#AC_SUBST(ALLOCA_OBJECT)
+
+ac_config_files="$ac_config_files Makefile builtins/Makefile lib/readline/Makefile lib/glob/Makefile lib/intl/Makefile lib/malloc/Makefile lib/sh/Makefile lib/termcap/Makefile lib/tilde/Makefile doc/Makefile support/Makefile po/Makefile.in examples/loadables/Makefile examples/loadables/Makefile.inc examples/loadables/perl/Makefile support/bash.pc support/bashbug.sh"
+
+ac_config_commands="$ac_config_commands default"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    if test "x$cache_file" != "x/dev/null"; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+      if test ! -f "$cache_file" || test -h "$cache_file"; then
+	cat confcache >"$cache_file"
+      else
+        case $cache_file in #(
+        */* | ?:*)
+	  mv -f confcache "$cache_file"$$ &&
+	  mv -f "$cache_file"$$ "$cache_file" ;; #(
+        *)
+	  mv -f confcache "$cache_file" ;;
+	esac
+      fi
+    fi
+  else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -pR'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -pR'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -pR'
+  fi
+else
+  as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by bash $as_me 5.1-release, which was
+generated by GNU Autoconf 2.69.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+      --config     print configuration, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+      --header=FILE[:TEMPLATE]
+                   instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-bash@gnu.org>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+bash config.status 5.1-release
+configured by $0, generated by GNU Autoconf 2.69,
+  with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=?*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  --*=)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --config | --confi | --conf | --con | --co | --c )
+    $as_echo "$ac_cs_config"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --header | --heade | --head | --hea )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --he | --h)
+    # Conflict between --help and --header
+    as_fn_error $? "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+  *) as_fn_append ac_config_targets " $1"
+     ac_need_defaults=false ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+  set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+# Capture the value of obsolete ALL_LINGUAS because we need it to compute
+    # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS.
+    OBSOLETE_ALL_LINGUAS="$ALL_LINGUAS"
+    # Capture the value of LINGUAS because we need it to compute CATALOGS.
+    LINGUAS="${LINGUAS-%UNSET%}"
+
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+  case $ac_config_target in
+    "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+    "po-directories") CONFIG_COMMANDS="$CONFIG_COMMANDS po-directories" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+    "builtins/Makefile") CONFIG_FILES="$CONFIG_FILES builtins/Makefile" ;;
+    "lib/readline/Makefile") CONFIG_FILES="$CONFIG_FILES lib/readline/Makefile" ;;
+    "lib/glob/Makefile") CONFIG_FILES="$CONFIG_FILES lib/glob/Makefile" ;;
+    "lib/intl/Makefile") CONFIG_FILES="$CONFIG_FILES lib/intl/Makefile" ;;
+    "lib/malloc/Makefile") CONFIG_FILES="$CONFIG_FILES lib/malloc/Makefile" ;;
+    "lib/sh/Makefile") CONFIG_FILES="$CONFIG_FILES lib/sh/Makefile" ;;
+    "lib/termcap/Makefile") CONFIG_FILES="$CONFIG_FILES lib/termcap/Makefile" ;;
+    "lib/tilde/Makefile") CONFIG_FILES="$CONFIG_FILES lib/tilde/Makefile" ;;
+    "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
+    "support/Makefile") CONFIG_FILES="$CONFIG_FILES support/Makefile" ;;
+    "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;;
+    "examples/loadables/Makefile") CONFIG_FILES="$CONFIG_FILES examples/loadables/Makefile" ;;
+    "examples/loadables/Makefile.inc") CONFIG_FILES="$CONFIG_FILES examples/loadables/Makefile.inc" ;;
+    "examples/loadables/perl/Makefile") CONFIG_FILES="$CONFIG_FILES examples/loadables/perl/Makefile" ;;
+    "support/bash.pc") CONFIG_FILES="$CONFIG_FILES support/bash.pc" ;;
+    "support/bashbug.sh") CONFIG_FILES="$CONFIG_FILES support/bashbug.sh" ;;
+    "default") CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
+
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp= ac_tmp=
+  trap 'exit_status=$?
+  : "${ac_tmp:=$tmp}"
+  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+  trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
+h
+s///
+s/^/:/
+s/[	 ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[	 ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+  ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+  if test -z "$ac_tt"; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any.  Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[	 ]*#[	 ]*define[	 ][	 ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  for (key in D) D_is_set[key] = 1
+  FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+  line = \$ 0
+  split(line, arg, " ")
+  if (arg[1] == "#") {
+    defundef = arg[2]
+    mac1 = arg[3]
+  } else {
+    defundef = substr(arg[1], 2)
+    mac1 = arg[2]
+  }
+  split(mac1, mac2, "(") #)
+  macro = mac2[1]
+  prefix = substr(line, 1, index(line, defundef) - 1)
+  if (D_is_set[macro]) {
+    # Preserve the white space surrounding the "#".
+    print prefix "define", macro P[macro] D[macro]
+    next
+  } else {
+    # Replace #undef with comments.  This is necessary, for example,
+    # in the case of _POSIX_SOURCE, which is predefined and required
+    # on some systems where configure will not decide to define it.
+    if (defundef == "undef") {
+      print "/*", prefix defundef, macro, "*/"
+      next
+    }
+  }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+  as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$ac_tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      as_fn_append ac_file_inputs " '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$ac_tmp/stdin" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  as_dir="$ac_dir"; as_fn_mkdir_p
+  ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
+      "$ac_tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&2;}
+
+  rm -f "$ac_tmp/stdin"
+  case $ac_file in
+  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+  :H)
+  #
+  # CONFIG_HEADER
+  #
+  if test x"$ac_file" != x-; then
+    {
+      $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+    } >"$ac_tmp/config.h" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
+    else
+      rm -f "$ac_file"
+      mv "$ac_tmp/config.h" "$ac_file" \
+	|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    fi
+  else
+    $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+      || as_fn_error $? "could not create -" "$LINENO" 5
+  fi
+ ;;
+
+  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
+
+
+  case $ac_file$ac_mode in
+    "po-directories":C)
+    for ac_file in $CONFIG_FILES; do
+      # Support "outfile[:infile[:infile...]]"
+      case "$ac_file" in
+        *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+      esac
+      # PO directories have a Makefile.in generated from Makefile.in.in.
+      case "$ac_file" in */Makefile.in)
+        # Adjust a relative srcdir.
+        ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+        ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'`
+        ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+        # In autoconf-2.13 it is called $ac_given_srcdir.
+        # In autoconf-2.50 it is called $srcdir.
+        test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+        case "$ac_given_srcdir" in
+          .)  top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+          /*) top_srcdir="$ac_given_srcdir" ;;
+          *)  top_srcdir="$ac_dots$ac_given_srcdir" ;;
+        esac
+        # Treat a directory as a PO directory if and only if it has a
+        # POTFILES.in file. This allows packages to have multiple PO
+        # directories under different names or in different locations.
+        if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
+          rm -f "$ac_dir/POTFILES"
+          test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
+          gt_tab=`printf '\t'`
+          cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*,     $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
+          POMAKEFILEDEPS="POTFILES.in"
+          # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
+          # on $ac_dir but don't depend on user-specified configuration
+          # parameters.
+          if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+            # The LINGUAS file contains the set of available languages.
+            if test -n "$OBSOLETE_ALL_LINGUAS"; then
+              test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+            fi
+            ALL_LINGUAS=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+            POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+          else
+            # The set of available languages was given in configure.in.
+            ALL_LINGUAS=$OBSOLETE_ALL_LINGUAS
+          fi
+          # Compute POFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+          # Compute UPDATEPOFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+          # Compute DUMMYPOFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+          # Compute GMOFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+          case "$ac_given_srcdir" in
+            .) srcdirpre= ;;
+            *) srcdirpre='$(srcdir)/' ;;
+          esac
+          POFILES=
+          UPDATEPOFILES=
+          DUMMYPOFILES=
+          GMOFILES=
+          for lang in $ALL_LINGUAS; do
+            POFILES="$POFILES $srcdirpre$lang.po"
+            UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+            DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+            GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+          done
+          # CATALOGS depends on both $ac_dir and the user's LINGUAS
+          # environment variable.
+          INST_LINGUAS=
+          if test -n "$ALL_LINGUAS"; then
+            for presentlang in $ALL_LINGUAS; do
+              useit=no
+              if test "%UNSET%" != "$LINGUAS"; then
+                desiredlanguages="$LINGUAS"
+              else
+                desiredlanguages="$ALL_LINGUAS"
+              fi
+              for desiredlang in $desiredlanguages; do
+                # Use the presentlang catalog if desiredlang is
+                #   a. equal to presentlang, or
+                #   b. a variant of presentlang (because in this case,
+                #      presentlang can be used as a fallback for messages
+                #      which are not translated in the desiredlang catalog).
+                case "$desiredlang" in
+                  "$presentlang"*) useit=yes;;
+                esac
+              done
+              if test $useit = yes; then
+                INST_LINGUAS="$INST_LINGUAS $presentlang"
+              fi
+            done
+          fi
+          CATALOGS=
+          if test -n "$INST_LINGUAS"; then
+            for lang in $INST_LINGUAS; do
+              CATALOGS="$CATALOGS $lang.gmo"
+            done
+          fi
+          test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
+          sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
+          for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
+            if test -f "$f"; then
+              case "$f" in
+                *.orig | *.bak | *~) ;;
+                *) cat "$f" >> "$ac_dir/Makefile" ;;
+              esac
+            fi
+          done
+        fi
+        ;;
+      esac
+    done ;;
+    "default":C)
+# Makefile uses this timestamp file to record whether config.h is up to date.
+echo timestamp > stamp-h
+ ;;
+
+  esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
diff --git a/configure.ac b/configure.ac
new file mode 100644
index 0000000..2fe3e7d
--- /dev/null
+++ b/configure.ac
@@ -0,0 +1,1310 @@
+dnl
+dnl Configure script for bash-5.1
+dnl
+dnl report bugs to chet@po.cwru.edu
+dnl
+dnl Process this file with autoconf to produce a configure script.
+
+# Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+#
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+AC_REVISION([for Bash 5.1, version 5.022])dnl
+
+define(bashvers, 5.1)
+define(relstatus, release)
+
+AC_INIT([bash], bashvers-relstatus, [bug-bash@gnu.org])
+
+dnl make sure we are using a recent autoconf version
+AC_PREREQ(2.61)
+
+AC_CONFIG_SRCDIR(shell.h)
+dnl where to find install.sh, config.sub, and config.guess
+AC_CONFIG_AUX_DIR(./support)
+AC_CONFIG_HEADERS(config.h)
+
+dnl checks for version info
+BASHVERS=bashvers
+RELSTATUS=relstatus
+
+dnl defaults for debug settings
+case "$RELSTATUS" in
+alp*|bet*|dev*|rc*|releng*|maint*)	DEBUG='-DDEBUG' MALLOC_DEBUG='-DMALLOC_DEBUG' ;;
+*)	DEBUG= MALLOC_DEBUG= ;;
+esac
+
+dnl canonicalize the host and os so we can do some tricky things before
+dnl parsing options
+AC_CANONICAL_HOST
+AC_CANONICAL_BUILD
+
+dnl configure defaults
+opt_bash_malloc=yes
+opt_afs=no
+opt_curses=no
+opt_with_installed_readline=no
+
+#htmldir=
+
+dnl some systems should be configured without the bash malloc by default
+dnl and some need a special compiler or loader
+dnl look in the NOTES file for more
+case "${host_cpu}-${host_os}" in
+# mostly obsolete platforms
+alpha*-*)	opt_bash_malloc=no ;;	# alpha running osf/1 or linux
+*[[Cc]]ray*-*)	opt_bash_malloc=no ;;	# Crays
+*-osf1*)	opt_bash_malloc=no ;;	# other osf/1 machines
+*-dgux*)	opt_bash_malloc=no ;;	# DG/UX machines
+sparc-svr4*)	opt_bash_malloc=no ;;	# sparc SVR4, SVR4.2
+m68k-sysv)	opt_bash_malloc=no ;;	# fixes file descriptor leak in closedir
+*-bsdi2.1|*-bsdi3.?)	opt_bash_malloc=no ; : ${CC:=shlicc2} ;; # for loadable builtins
+*-opennt*|*-interix*)	opt_bash_malloc=no ;;	# Interix, now owned by Microsoft
+*-beos*)	opt_bash_malloc=no ;;	# they say it's suitable
+# These need additional investigation
+sparc-linux*)	opt_bash_malloc=no ;;	# sparc running linux; requires ELF
+*-aix*)		opt_bash_malloc=no ;;	# AIX machines
+*-cygwin*)	opt_bash_malloc=no ;;	# Cygnus's CYGWIN environment
+# These lack a working sbrk(2)
+aarch64-freebsd*)	opt_bash_malloc=no ;;
+riscv*-freebsd*)	opt_bash_malloc=no ;;
+# Mach-derived systems have a ton of extra malloc functions and lack sbrk(2)
+*-nextstep*)	opt_bash_malloc=no ;;	# NeXT machines running NeXTstep
+*-openstep*)	opt_bash_malloc=no ;;	# i386/Sparc/HP machines running Openstep
+*-macos*)	opt_bash_malloc=no ;;	# Apple MacOS X
+*-rhapsody*)	opt_bash_malloc=no ;;	# Apple Rhapsody (MacOS X)
+*-darwin*)	opt_bash_malloc=no ;;	# Apple Darwin (MacOS X)
+*-machten4)	opt_bash_malloc=no ;;	# MachTen 4.x
+# Niche or non-mainstream-shell-user systems
+*-qnx*)		opt_bash_malloc=no ;;	# QNX 4.2, QNX [67].x
+*-nsk*)		opt_bash_malloc=no ;;	# HP NonStop
+*-haiku*)	opt_bash_malloc=no ;;	# Haiku OS
+*-genode*)	opt_bash_malloc=no ;;	# Genode has no sbrk
+esac
+
+# memory scrambling on free()
+case "${host_os}" in
+sco3.2v5*|sco3.2v4*)	opt_memscramble=no ;;
+*)			opt_memscramble=yes ;;
+esac
+
+dnl
+dnl macros for the bash debugger
+dnl
+dnl AM_PATH_LISPDIR
+AC_ARG_VAR(DEBUGGER_START_FILE, [location of bash debugger initialization file])
+
+dnl arguments to configure
+dnl packages
+AC_ARG_WITH(afs, AC_HELP_STRING([--with-afs], [if you are running AFS]), opt_afs=$withval)
+AC_ARG_WITH(bash-malloc, AC_HELP_STRING([--with-bash-malloc], [use the Bash version of malloc]), opt_bash_malloc=$withval)
+AC_ARG_WITH(curses, AC_HELP_STRING([--with-curses], [use the curses library instead of the termcap library]), opt_curses=$withval)
+AC_ARG_WITH(gnu-malloc, AC_HELP_STRING([--with-gnu-malloc], [synonym for --with-bash-malloc]), opt_bash_malloc=$withval)
+AC_ARG_WITH(installed-readline, AC_HELP_STRING([--with-installed-readline], [use a version of the readline library that is already installed]), opt_with_installed_readline=$withval)
+
+if test "$opt_bash_malloc" = yes; then
+	MALLOC_TARGET=malloc
+	MALLOC_SRC=malloc.c
+
+	MALLOC_LIB='-lmalloc'
+	MALLOC_LIBRARY='$(ALLOC_LIBDIR)/libmalloc.a'
+	MALLOC_LDFLAGS='-L$(ALLOC_LIBDIR)'
+	MALLOC_DEP='$(MALLOC_LIBRARY)'
+
+	AC_DEFINE(USING_BASH_MALLOC)
+else
+	MALLOC_LIB=
+	MALLOC_LIBRARY=
+	MALLOC_LDFLAGS=
+	MALLOC_DEP=	
+fi
+
+if test "$opt_afs" = yes; then
+	AC_DEFINE(AFS)
+fi
+
+if test "$opt_curses" = yes; then
+	prefer_curses=yes
+fi
+
+if test -z "${DEBUGGER_START_FILE}"; then
+	DEBUGGER_START_FILE='${datadir}/bashdb/bashdb-main.inc'
+fi
+
+dnl optional shell features in config.h.in
+opt_minimal_config=no
+
+opt_job_control=yes
+opt_alias=yes
+opt_readline=yes
+opt_history=yes
+opt_bang_history=yes
+opt_dirstack=yes
+opt_restricted=yes
+opt_process_subst=yes
+opt_prompt_decoding=yes
+opt_select=yes
+opt_help=yes
+opt_array_variables=yes
+opt_dparen_arith=yes
+opt_extended_glob=yes
+opt_brace_expansion=yes
+opt_disabled_builtins=no
+opt_command_timing=yes
+opt_xpg_echo=no
+opt_strict_posix=no
+opt_cond_command=yes
+opt_cond_regexp=yes
+opt_coproc=yes
+opt_arith_for_command=yes
+opt_net_redirs=yes
+opt_progcomp=yes
+opt_separate_help=no
+opt_multibyte=yes
+opt_debugger=yes
+opt_single_longdoc_strings=yes
+opt_casemod_attrs=yes
+opt_casemod_expansions=yes
+opt_extglob_default=no
+opt_dircomplete_expand_default=no
+opt_globascii_default=yes
+opt_function_import=yes
+opt_dev_fd_stat_broken=no
+
+dnl options that affect how bash is compiled and linked
+opt_static_link=no
+opt_profiling=no
+
+dnl argument parsing for optional features
+AC_ARG_ENABLE(minimal-config, AC_HELP_STRING([--enable-minimal-config], [a minimal sh-like configuration]), opt_minimal_config=$enableval)
+
+dnl a minimal configuration turns everything off, but features can be
+dnl added individually
+if test $opt_minimal_config = yes; then
+	opt_job_control=no opt_alias=no opt_readline=no
+	opt_history=no opt_bang_history=no opt_dirstack=no
+	opt_restricted=no opt_process_subst=no opt_prompt_decoding=no
+	opt_select=no opt_help=no opt_array_variables=no opt_dparen_arith=no
+	opt_brace_expansion=no opt_disabled_builtins=no opt_command_timing=no
+	opt_extended_glob=no opt_cond_command=no opt_arith_for_command=no
+	opt_net_redirs=no opt_progcomp=no opt_separate_help=no
+	opt_multibyte=yes opt_cond_regexp=no opt_coproc=no
+	opt_casemod_attrs=no opt_casemod_expansions=no opt_extglob_default=no
+	opt_globascii_default=yes
+fi
+
+AC_ARG_ENABLE(alias, AC_HELP_STRING([--enable-alias], [enable shell aliases]), opt_alias=$enableval)
+AC_ARG_ENABLE(arith-for-command, AC_HELP_STRING([--enable-arith-for-command], [enable arithmetic for command]), opt_arith_for_command=$enableval)
+AC_ARG_ENABLE(array-variables, AC_HELP_STRING([--enable-array-variables], [include shell array variables]), opt_array_variables=$enableval)
+AC_ARG_ENABLE(bang-history, AC_HELP_STRING([--enable-bang-history], [turn on csh-style history substitution]), opt_bang_history=$enableval)
+AC_ARG_ENABLE(brace-expansion, AC_HELP_STRING([--enable-brace-expansion], [include brace expansion]), opt_brace_expansion=$enableval)
+AC_ARG_ENABLE(casemod-attributes, AC_HELP_STRING([--enable-casemod-attributes], [include case-modifying variable attributes]), opt_casemod_attrs=$enableval)
+AC_ARG_ENABLE(casemod-expansions, AC_HELP_STRING([--enable-casemod-expansions], [include case-modifying word expansions]), opt_casemod_expansions=$enableval)
+AC_ARG_ENABLE(command-timing, AC_HELP_STRING([--enable-command-timing], [enable the time reserved word and command timing]), opt_command_timing=$enableval)
+AC_ARG_ENABLE(cond-command, AC_HELP_STRING([--enable-cond-command], [enable the conditional command]), opt_cond_command=$enableval)
+AC_ARG_ENABLE(cond-regexp, AC_HELP_STRING([--enable-cond-regexp], [enable extended regular expression matching in conditional commands]), opt_cond_regexp=$enableval)
+AC_ARG_ENABLE(coprocesses, AC_HELP_STRING([--enable-coprocesses], [enable coprocess support and the coproc reserved word]), opt_coproc=$enableval)
+AC_ARG_ENABLE(debugger, AC_HELP_STRING([--enable-debugger], [enable support for bash debugger]), opt_debugger=$enableval)
+AC_ARG_ENABLE(dev-fd-stat-broken, AC_HELP_STRING([--enable-dev-fd-stat-broken], [enable this option if stat on /dev/fd/N and fstat on file descriptor N don't return the same results]), opt_dev_fd_stat_broken=$enableval)
+AC_ARG_ENABLE(direxpand-default, AC_HELP_STRING([--enable-direxpand-default], [enable the direxpand shell option by default]), opt_dircomplete_expand_default=$enableval)
+AC_ARG_ENABLE(directory-stack, AC_HELP_STRING([--enable-directory-stack], [enable builtins pushd/popd/dirs]), opt_dirstack=$enableval)
+AC_ARG_ENABLE(disabled-builtins, AC_HELP_STRING([--enable-disabled-builtins], [allow disabled builtins to still be invoked]), opt_disabled_builtins=$enableval)
+AC_ARG_ENABLE(dparen-arithmetic, AC_HELP_STRING([--enable-dparen-arithmetic], [include ((...)) command]), opt_dparen_arith=$enableval)
+AC_ARG_ENABLE(extended-glob, AC_HELP_STRING([--enable-extended-glob], [include ksh-style extended pattern matching]), opt_extended_glob=$enableval)
+AC_ARG_ENABLE(extended-glob-default, AC_HELP_STRING([--enable-extended-glob-default], [force extended pattern matching to be enabled by default]), opt_extglob_default=$enableval)
+AC_ARG_ENABLE(function-import, AC_HELP_STRING([--enable-function-import], [allow bash to import exported function definitions by default]), opt_function_import=$enableval)
+AC_ARG_ENABLE(glob-asciiranges-default, AC_HELP_STRING([--enable-glob-asciiranges-default], [force bracket range expressions in pattern matching to use the C locale by default]), opt_globascii_default=$enableval)
+AC_ARG_ENABLE(help-builtin, AC_HELP_STRING([--enable-help-builtin], [include the help builtin]), opt_help=$enableval)
+AC_ARG_ENABLE(history, AC_HELP_STRING([--enable-history], [turn on command history]), opt_history=$enableval)
+AC_ARG_ENABLE(job-control, AC_HELP_STRING([--enable-job-control], [enable job control features]), opt_job_control=$enableval)
+AC_ARG_ENABLE(multibyte, AC_HELP_STRING([--enable-multibyte], [enable multibyte characters if OS supports them]), opt_multibyte=$enableval)
+AC_ARG_ENABLE(net-redirections, AC_HELP_STRING([--enable-net-redirections], [enable /dev/tcp/host/port redirection]), opt_net_redirs=$enableval)
+AC_ARG_ENABLE(process-substitution, AC_HELP_STRING([--enable-process-substitution], [enable process substitution]), opt_process_subst=$enableval)
+AC_ARG_ENABLE(progcomp, AC_HELP_STRING([--enable-progcomp], [enable programmable completion and the complete builtin]), opt_progcomp=$enableval)
+AC_ARG_ENABLE(prompt-string-decoding, AC_HELP_STRING([--enable-prompt-string-decoding], [turn on escape character decoding in prompts]), opt_prompt_decoding=$enableval)
+AC_ARG_ENABLE(readline, AC_HELP_STRING([--enable-readline], [turn on command line editing]), opt_readline=$enableval)
+AC_ARG_ENABLE(restricted, AC_HELP_STRING([--enable-restricted], [enable a restricted shell]), opt_restricted=$enableval)
+AC_ARG_ENABLE(select, AC_HELP_STRING([--enable-select], [include select command]), opt_select=$enableval)
+AC_ARG_ENABLE(separate-helpfiles, AC_HELP_STRING([--enable-separate-helpfiles], [use external files for help builtin documentation]), opt_separate_help=$enableval)
+AC_ARG_ENABLE(single-help-strings, AC_HELP_STRING([--enable-single-help-strings], [store help documentation as a single string to ease translation]), opt_single_longdoc_strings=$enableval)
+AC_ARG_ENABLE(strict-posix-default, AC_HELP_STRING([--enable-strict-posix-default], [configure bash to be posix-conformant by default]), opt_strict_posix=$enableval)
+AC_ARG_ENABLE(usg-echo-default, AC_HELP_STRING([--enable-usg-echo-default], [a synonym for --enable-xpg-echo-default]), opt_xpg_echo=$enableval)
+AC_ARG_ENABLE(xpg-echo-default, AC_HELP_STRING([--enable-xpg-echo-default], [make the echo builtin expand escape sequences by default]), opt_xpg_echo=$enableval)
+
+dnl options that alter how bash is compiled and linked
+AC_ARG_ENABLE(mem-scramble, AC_HELP_STRING([--enable-mem-scramble], [scramble memory on calls to malloc and free]), opt_memscramble=$enableval)
+AC_ARG_ENABLE(profiling, AC_HELP_STRING([--enable-profiling], [allow profiling with gprof]), opt_profiling=$enableval)
+AC_ARG_ENABLE(static-link, AC_HELP_STRING([--enable-static-link], [link bash statically, for use as a root shell]), opt_static_link=$enableval)
+
+dnl So-called `precious' variables
+AC_ARG_VAR([CC_FOR_BUILD], [C compiler used when compiling binaries used only at build time])
+AC_ARG_VAR([CFLAGS_FOR_BUILD], [Compilation options (CFLAGS) used when compiling binaries used only at build time])
+AC_ARG_VAR([LDFLAGS_FOR_BUILD], [Linker options (LDFLAGS) used when compiling binaries used only at build time])
+AC_ARG_VAR([CPPFLAGS_FOR_BUILD], [C preprocessor options (CPPFLAGS) used when compiling binaries used only at build time])
+
+dnl opt_job_control is handled later, after BASH_JOB_CONTROL_MISSING runs
+
+dnl opt_readline and opt_history are handled later, because AC_PROG_CC needs
+dnl to be run before we can check the version of an already-installed readline
+dnl library
+
+if test $opt_alias = yes; then
+AC_DEFINE(ALIAS)
+fi
+if test $opt_dirstack = yes; then
+AC_DEFINE(PUSHD_AND_POPD)
+fi
+if test $opt_restricted = yes; then
+AC_DEFINE(RESTRICTED_SHELL)
+fi
+if test $opt_process_subst = yes; then
+AC_DEFINE(PROCESS_SUBSTITUTION)
+fi
+if test $opt_prompt_decoding = yes; then
+AC_DEFINE(PROMPT_STRING_DECODE)
+fi
+if test $opt_select = yes; then
+AC_DEFINE(SELECT_COMMAND)
+fi
+if test $opt_help = yes; then
+AC_DEFINE(HELP_BUILTIN)
+fi
+if test $opt_array_variables = yes; then
+AC_DEFINE(ARRAY_VARS)
+fi
+if test $opt_dparen_arith = yes; then
+AC_DEFINE(DPAREN_ARITHMETIC)
+fi
+if test $opt_brace_expansion = yes; then
+AC_DEFINE(BRACE_EXPANSION)
+fi
+if test $opt_disabled_builtins = yes; then
+AC_DEFINE(DISABLED_BUILTINS)
+fi
+if test $opt_command_timing = yes; then
+AC_DEFINE(COMMAND_TIMING)
+fi
+if test $opt_xpg_echo = yes ; then
+AC_DEFINE(DEFAULT_ECHO_TO_XPG)
+fi
+if test $opt_strict_posix = yes; then
+AC_DEFINE(STRICT_POSIX)
+fi
+if test $opt_extended_glob = yes ; then
+AC_DEFINE(EXTENDED_GLOB)
+fi
+if test $opt_extglob_default = yes; then
+AC_DEFINE(EXTGLOB_DEFAULT, 1)
+else
+AC_DEFINE(EXTGLOB_DEFAULT, 0)
+fi
+if test $opt_cond_command = yes ; then
+AC_DEFINE(COND_COMMAND)
+fi
+if test $opt_cond_regexp = yes ; then
+AC_DEFINE(COND_REGEXP)
+fi
+if test $opt_coproc = yes; then
+AC_DEFINE(COPROCESS_SUPPORT)
+fi
+if test $opt_arith_for_command = yes; then
+AC_DEFINE(ARITH_FOR_COMMAND)
+fi
+if test $opt_net_redirs = yes; then
+AC_DEFINE(NETWORK_REDIRECTIONS)
+fi
+if test $opt_progcomp = yes; then
+AC_DEFINE(PROGRAMMABLE_COMPLETION)
+fi
+if test $opt_multibyte = no; then
+AC_DEFINE(NO_MULTIBYTE_SUPPORT)
+fi
+if test $opt_debugger = yes; then
+AC_DEFINE(DEBUGGER)
+fi
+if test $opt_casemod_attrs = yes; then
+AC_DEFINE(CASEMOD_ATTRS)
+fi
+if test $opt_casemod_expansions = yes; then
+AC_DEFINE(CASEMOD_EXPANSIONS)
+fi
+if test $opt_dircomplete_expand_default = yes; then
+AC_DEFINE(DIRCOMPLETE_EXPAND_DEFAULT)
+fi
+if test $opt_globascii_default = yes; then
+AC_DEFINE(GLOBASCII_DEFAULT, 1)
+else
+AC_DEFINE(GLOBASCII_DEFAULT, 0)
+fi
+if test $opt_function_import = yes; then
+AC_DEFINE(FUNCTION_IMPORT)
+fi
+if test $opt_dev_fd_stat_broken = yes; then
+AC_DEFINE(DEV_FD_STAT_BROKEN)
+fi
+
+if test $opt_memscramble = yes; then
+AC_DEFINE(MEMSCRAMBLE)
+fi
+
+if test "$opt_minimal_config" = yes; then
+	TESTSCRIPT=run-minimal
+else
+	TESTSCRIPT=run-all
+fi
+
+HELPDIR= HELPDIRDEFINE= HELPINSTALL= HELPFILES_TARGET=
+if test "$opt_separate_help" != no; then
+	if test "$opt_separate_help" = "yes" ; then
+		HELPDIR='${datadir}/bash'
+	else
+		HELPDIR=$opt_separate_help
+	fi
+	HELPDIRDEFINE='-H ${HELPDIR}'
+	HELPINSTALL='install-help'
+	HELPFILES_TARGET='helpdoc'
+fi
+HELPSTRINGS=
+if test "$opt_single_longdoc_strings" != "yes"; then
+	HELPSTRINGS='-S'
+fi
+
+dnl now substitute in the values generated by arguments
+AC_SUBST(TESTSCRIPT)
+AC_SUBST(MALLOC_TARGET)
+AC_SUBST(MALLOC_SRC)
+
+AC_SUBST(MALLOC_LIB)
+AC_SUBST(MALLOC_LIBRARY)
+AC_SUBST(MALLOC_LDFLAGS)
+AC_SUBST(MALLOC_DEP)
+
+AC_SUBST(htmldir)
+
+AC_SUBST(HELPDIR)
+AC_SUBST(HELPDIRDEFINE)
+AC_SUBST(HELPINSTALL)
+AC_SUBST(HELPFILES_TARGET)
+AC_SUBST(HELPSTRINGS)
+
+dnl We want these before the checks, so the checks can modify their values.
+if test -z "$CFLAGS"; then
+	want_auto_cflags=1
+fi
+
+echo ""
+echo "Beginning configuration for bash-$BASHVERS-$RELSTATUS for ${host_cpu}-${host_vendor}-${host_os}"
+echo ""
+
+dnl compilation checks
+dnl AC_PROG_CC sets $cross_compiling to `yes' if cross-compiling for a
+dnl different environment
+AC_PROG_CC
+
+if test -n "$want_auto_cflags"; then
+	AUTO_CFLAGS="-g ${GCC+-O2}"
+	AUTO_LDFLAGS="-g ${GCC+-O2}"
+	STYLE_CFLAGS="${GCC+-Wno-parentheses} ${GCC+-Wno-format-security}"
+else
+	AUTO_CFLAGS= AUTO_LDFLAGS= STYLE_CFLAGS=
+fi
+
+dnl test for Unix variants
+AC_ISC_POSIX
+AC_MINIX
+
+AC_SYS_LARGEFILE
+
+dnl BEGIN changes for cross-building (currently cygwin, minGW, and
+dnl (obsolete) BeOS)
+
+SIGNAMES_O=
+SIGNAMES_H=lsignames.h
+
+dnl load up the cross-building cache file -- add more cases and cache
+dnl files as necessary
+
+dnl Note that host and target machine are the same, and different than the
+dnl build machine.
+dnl Set SIGNAMES_H based on whether or not we're cross-compiling.
+
+CROSS_COMPILE=
+if test "x$cross_compiling" = "xyes"; then
+    case "${host}" in
+    *-cygwin*)
+	cross_cache=${srcdir}/cross-build/cygwin32.cache
+	;;
+    *-mingw*)
+	cross_cache=${srcdir}/cross-build/cygwin32.cache
+	;;
+    i[[3456]]86-*-beos*)
+	cross_cache=${srcdir}/cross-build/x86-beos.cache
+	;;
+    *-qnx*)
+	cross_cache=${srcdir}/cross-build/qnx.cache
+	;;
+    *)	echo "configure: cross-compiling for $host is not supported" >&2
+	;;
+    esac
+    if test -n "${cross_cache}" && test -r "${cross_cache}"; then
+	echo "loading cross-build cache file ${cross_cache}"
+	. ${cross_cache}
+    fi
+    unset cross_cache
+    SIGNAMES_O='signames.o'
+    CROSS_COMPILE='-DCROSS_COMPILING'
+    AC_SUBST(CROSS_COMPILE)
+fi
+AC_SUBST(SIGNAMES_H)
+AC_SUBST(SIGNAMES_O)
+
+dnl END changes for cross-building
+
+dnl default values
+CFLAGS=${CFLAGS-"$AUTO_CFLAGS"}
+# LDFLAGS=${LDFLAGS="$AUTO_LDFLAGS"}	# XXX
+
+dnl handle options that alter how bash is compiled and linked
+dnl these must come after the test for cc/gcc
+if test "$opt_profiling" = "yes"; then
+	PROFILE_FLAGS=-pg
+	case "$host_os" in
+	solaris2*|linux*)	;;
+	*)		opt_static_link=yes ;;
+	esac
+	DEBUG= MALLOC_DEBUG=
+fi
+
+prefer_shared=yes
+prefer_static=no
+
+if test "$opt_static_link" = yes; then
+	prefer_static=yes
+	prefer_shared=no
+	# if we're using gcc, add `-static' to LDFLAGS, except on Solaris >= 2
+	if test -n "$GCC" || test "$ac_cv_prog_gcc" = "yes"; then
+		STATIC_LD="-static" 
+		case "$host_os" in
+		solaris2*|linux*)	;;
+		*)		LDFLAGS="$LDFLAGS -static" ;;	# XXX experimental
+		esac
+	fi
+fi
+
+# set the appropriate make variables for building the "build tools"
+# modify defaults based on whether or not we are cross compiling, since the
+# options for the target host may not be appropriate for the build host
+if test "X$cross_compiling" = "Xno"; then
+	CC_FOR_BUILD=${CC_FOR_BUILD-'$(CC)'}
+	CPPFLAGS_FOR_BUILD=${CPPFLAGS_FOR_BUILD-"$CPPFLAGS"}	# XXX - should it be '$(CPPFLAGS)'
+	if test X"$opt_profiling" = Xyes; then
+		LDFLAGS_FOR_BUILD=${LDFLAGS_FOR_BUILD-'$(BASE_LDFLAGS)'}
+	else
+		LDFLAGS_FOR_BUILD=${LDFLAGS_FOR_BUILD-'$(LDFLAGS)'}
+	fi
+	# CFLAGS set above to default value if not passed in environment
+	if test -n "$want_auto_cflags" ; then
+		CFLAGS_FOR_BUILD="${CFLAGS} ${STYLE_CFLAGS}"
+	else
+		CFLAGS_FOR_BUILD=${CFLAGS-'$(CFLAGS)'}
+	fi
+	LIBS_FOR_BUILD=${LIBS_FOR_BUILD-'$(LIBS)'}
+else
+	CC_FOR_BUILD=${CC_FOR_BUILD-"gcc"}
+	CPPFLAGS_FOR_BUILD=${CPPFLAGS_FOR_BUILD-""}
+	LDFLAGS_FOR_BUILD=${LDFLAGS_FOR_BUILD-""}
+	CFLAGS_FOR_BUILD=${CFLAGS_FOR_BUILD="-g"}
+	LIBS_FOR_BUILD=${LIBS_FOR_BUILD-""}
+fi
+
+AC_SUBST(CFLAGS)
+AC_SUBST(CPPFLAGS)
+AC_SUBST(LDFLAGS)
+AC_SUBST(STATIC_LD)
+
+AC_SUBST(CC_FOR_BUILD)
+AC_SUBST(CFLAGS_FOR_BUILD)
+AC_SUBST(CPPFLAGS_FOR_BUILD)
+AC_SUBST(LDFLAGS_FOR_BUILD)
+AC_SUBST(LIBS_FOR_BUILD)
+
+AC_PROG_GCC_TRADITIONAL
+
+dnl BEGIN READLINE and HISTORY LIBRARY SECTION
+dnl prepare to allow bash to be linked against an already-installed readline
+
+dnl first test that the readline version is new enough to link bash against
+if test "$opt_readline" = yes && test "$opt_with_installed_readline" != "no"
+then
+	# If the user specified --with-installed-readline=PREFIX and PREFIX
+	# is not `yes', set ac_cv_rl_prefix to PREFIX
+	test $opt_with_installed_readline != "yes" && ac_cv_rl_prefix=$opt_with_installed_readline
+
+	RL_LIB_READLINE_VERSION
+
+	case "$ac_cv_rl_version" in
+	8*|9*)	;;
+	*)	opt_with_installed_readline=no 
+		AC_MSG_WARN([installed readline library is too old to be linked with bash])
+		AC_MSG_WARN([using private bash version])
+		;;
+	esac
+fi
+
+TILDE_LIB=-ltilde
+if test $opt_readline = yes; then
+	AC_DEFINE(READLINE)
+	if test "$opt_with_installed_readline" != "no" ; then
+		case "$opt_with_installed_readline" in
+		yes)	RL_INCLUDE= ;;
+		*)	case "$RL_INCLUDEDIR" in
+			/usr/include)	;;
+			*)		RL_INCLUDE='-I${RL_INCLUDEDIR}' ;;
+			esac
+			;;
+		esac
+		READLINE_DEP=
+		READLINE_LIB=-lreadline
+		# section for OS versions that don't allow unresolved symbols
+		# to be compiled into dynamic libraries.
+		case "$host_os" in
+		cygwin*)	TILDE_LIB= ;;
+		esac
+	else
+		RL_LIBDIR='$(dot)/$(LIBSUBDIR)/readline'
+		READLINE_DEP='$(READLINE_LIBRARY)'
+		# section for OS versions that ship an older/broken version of
+		# readline as a standard dynamic library and don't allow a
+		# static version specified as -llibname to override the
+		# dynamic version
+		case "${host_os}" in
+		darwin[[89]]*|darwin10*) READLINE_LIB='${READLINE_LIBRARY}' ;;
+		*)		READLINE_LIB=-lreadline ;;
+		esac
+	fi
+else
+	RL_LIBDIR='$(dot)/$(LIBSUBDIR)/readline'
+	READLINE_LIB= READLINE_DEP=
+fi
+if test $opt_history = yes || test $opt_bang_history = yes; then
+	if test $opt_history = yes; then
+		AC_DEFINE(HISTORY)
+	fi
+	if test $opt_bang_history = yes; then
+		AC_DEFINE(BANG_HISTORY)
+	fi
+ 	if test "$opt_with_installed_readline" != "no"; then
+		HIST_LIBDIR=$RL_LIBDIR
+		HISTORY_DEP=
+		HISTORY_LIB=-lhistory
+		case "$opt_with_installed_readline" in
+		yes)	RL_INCLUDE= ;;
+		*)	case "$RL_INCLUDEDIR" in
+			/usr/include)	;;
+			*)		RL_INCLUDE='-I${RL_INCLUDEDIR}' ;;
+			esac
+			;;
+		esac
+	else
+		HIST_LIBDIR='$(dot)/$(LIBSUBDIR)/readline'
+		HISTORY_DEP='$(HISTORY_LIBRARY)'
+		# section for OS versions that ship an older version of
+		# readline as a standard dynamic library and don't allow a
+		# static version specified as -llibname to override the
+		# dynamic version
+		case "${host_os}" in
+		darwin[[89]]*|darwin10*) HISTORY_LIB='${HISTORY_LIBRARY}' ;;
+		*)		HISTORY_LIB=-lhistory ;;
+		esac
+	fi
+else
+	HIST_LIBDIR='$(dot)/$(LIBSUBDIR)/readline'
+	HISTORY_LIB= HISTORY_DEP=
+fi
+AC_SUBST(READLINE_LIB)
+AC_SUBST(READLINE_DEP)
+AC_SUBST(RL_LIBDIR)
+AC_SUBST(RL_INCLUDEDIR)
+AC_SUBST(RL_INCLUDE)
+AC_SUBST(HISTORY_LIB)
+AC_SUBST(HISTORY_DEP)
+AC_SUBST(HIST_LIBDIR)
+AC_SUBST(TILDE_LIB)
+
+dnl END READLINE and HISTORY LIBRARY SECTION
+
+dnl programs needed by the build and install process
+AC_PROG_INSTALL
+AC_CHECK_TOOL(AR, ar)
+dnl Set default for ARFLAGS, since autoconf does not have a macro for it.
+dnl This allows people to set it when running configure or make
+test -n "$ARFLAGS" || ARFLAGS="cr"
+AC_PROG_RANLIB
+AC_PROG_YACC
+AC_PROG_MAKE_SET
+
+case "$ac_cv_prog_YACC" in
+*bison*)	;;
+*)	AC_MSG_WARN([bison not available; needed to process parse.y]) ;;
+esac
+
+case "$host_os" in
+opennt*|interix*)	MAKE_SHELL="$INTERIX_ROOT/bin/sh" ;;
+*)			MAKE_SHELL=/bin/sh ;;
+esac
+AC_SUBST(MAKE_SHELL)
+
+dnl this is similar to the expanded AC_PROG_RANLIB
+if test x$SIZE = x; then
+	if test x$ac_tool_prefix = x; then
+		SIZE=size
+	else
+		SIZE=${ac_tool_prefix}size
+		save_IFS=$IFS ; IFS=:
+		size_found=0
+		for dir in $PATH; do
+			if test -x $dir/$SIZE ; then
+				size_found=1
+				break
+			fi
+		done
+		if test $size_found -eq 0; then
+			SIZE=:
+		fi
+		IFS=$save_IFS
+	fi
+fi
+AC_SUBST(SIZE)
+
+m4_include([m4/stat-time.m4])
+m4_include([m4/timespec.m4])
+
+dnl include files for gettext
+
+m4_include([m4/codeset.m4])
+m4_include([m4/extern-inline.m4])
+m4_include([m4/fcntl-o.m4])
+m4_include([m4/gettext.m4])
+m4_include([m4/glibc2.m4])
+m4_include([m4/glibc21.m4])
+m4_include([m4/host-cpu-c-abi.m4])
+m4_include([m4/iconv.m4])
+m4_include([m4/intdiv0.m4])
+m4_include([m4/intl.m4])
+m4_include([m4/intlmacosx.m4])
+m4_include([m4/intl-thread-locale.m4])
+m4_include([m4/intmax.m4])
+m4_include([m4/inttypes-pri.m4])
+m4_include([m4/inttypes.m4])
+m4_include([m4/inttypes_h.m4])
+m4_include([m4/lcmessage.m4])
+m4_include([m4/lib-ld.m4])
+m4_include([m4/lib-link.m4])
+m4_include([m4/lib-prefix.m4])
+m4_include([m4/lock.m4])
+m4_include([m4/nls.m4])
+m4_include([m4/po.m4])
+m4_include([m4/printf-posix.m4])
+m4_include([m4/progtest.m4])
+m4_include([m4/pthread_rwlock_rdlock.m4])
+m4_include([m4/size_max.m4])
+m4_include([m4/stdint_h.m4])
+m4_include([m4/threadlib.m4])
+m4_include([m4/uintmax_t.m4])
+m4_include([m4/ulonglong.m4])
+m4_include([m4/visibility.m4])
+m4_include([m4/wchar_t.m4])
+m4_include([m4/wint_t.m4])
+m4_include([m4/xsize.m4])
+
+dnl Turn on any extensions available in the GNU C library.
+AC_DEFINE(_GNU_SOURCE, 1)
+
+dnl C compiler characteristics
+AC_C_CONST
+AC_C_INLINE
+AC_C_BIGENDIAN
+AC_C_STRINGIZE
+AC_C_LONG_DOUBLE
+AC_C_PROTOTYPES
+AC_C_CHAR_UNSIGNED
+AC_C_VOLATILE
+AC_C_RESTRICT
+
+dnl initialize GNU gettext
+AM_GNU_GETTEXT([no-libtool], [need-ngettext], [lib/intl])
+
+dnl header files
+AC_HEADER_DIRENT
+AC_HEADER_TIME
+AC_HEADER_MAJOR
+
+BASH_HEADER_INTTYPES
+
+AC_CHECK_HEADERS(unistd.h stdlib.h stdarg.h varargs.h limits.h string.h \
+		 memory.h locale.h termcap.h termio.h termios.h dlfcn.h \
+		 stdbool.h stddef.h stdint.h netdb.h pwd.h grp.h strings.h \
+		 regex.h syslog.h ulimit.h)
+AC_CHECK_HEADERS(sys/pte.h sys/stream.h sys/select.h sys/file.h sys/ioctl.h \
+		 sys/mman.h sys/param.h sys/random.h sys/socket.h sys/stat.h \
+		 sys/time.h sys/times.h sys/types.h sys/wait.h)
+AC_CHECK_HEADERS(netinet/in.h arpa/inet.h)
+
+dnl sys/ptem.h requires definitions from sys/stream.h on systems where it
+dnl exists
+AC_CHECK_HEADER(sys/ptem.h, , ,[[
+#if HAVE_SYS_STREAM_H
+#  include <sys/stream.h>
+#endif
+]])
+
+dnl SunOS 4 needs to include <sys/time.h> before <sys/resource.h> to compile
+dnl autoconf complains about presence but inability to compile
+AC_CHECK_HEADER(sys/resource.h, AC_DEFINE(HAVE_SYS_RESOURCE_H), [], [[
+#if HAVE_SYS_TIME_H
+#  include <sys/time.h>
+#endif
+]])
+
+dnl special checks for libc functions
+AC_FUNC_ALLOCA
+AC_FUNC_CHOWN
+AC_FUNC_GETPGRP
+AC_FUNC_SETVBUF_REVERSED
+AC_FUNC_VPRINTF
+AC_FUNC_STRCOLL
+
+dnl if we're not using the bash malloc but require the C alloca, set things
+dnl up to build a libmalloc.a containing only alloca.o
+
+if test "$ac_cv_func_alloca_works" = "no" && test "$opt_bash_malloc" = "no"; then
+	MALLOC_TARGET=alloca
+	MALLOC_SRC=alloca.c
+
+	MALLOC_LIB='-lmalloc'
+	MALLOC_LIBRARY='$(ALLOC_LIBDIR)/libmalloc.a'
+	MALLOC_LDFLAGS='-L$(ALLOC_LIBDIR)'
+	MALLOC_DEP='$(MALLOC_LIBRARY)'
+fi
+
+dnl if vprintf is not in libc, see if it's defined in stdio.h
+if test "$ac_cv_func_vprintf" = no; then
+    AC_MSG_CHECKING(for declaration of vprintf in stdio.h)
+    AC_EGREP_HEADER([[int[ 	]*vprintf[^a-zA-Z0-9]]],stdio.h,ac_cv_func_vprintf=yes)
+    AC_MSG_RESULT($ac_cv_func_vprintf)
+    if test $ac_cv_func_vprintf = yes; then
+	AC_DEFINE(HAVE_VPRINTF)
+    fi
+fi
+
+if test "$ac_cv_func_vprintf" = no && test "$ac_cv_func__doprnt" = "yes"; then
+  AC_LIBOBJ(vprint)
+fi
+
+dnl signal stuff
+AC_TYPE_SIGNAL
+
+dnl checks for certain version-specific system calls and libc functions
+AC_CHECK_FUNC(__setostype, AC_DEFINE(HAVE_SETOSTYPE))
+AC_CHECK_FUNC(wait3, AC_DEFINE(HAVE_WAIT3))
+
+dnl checks for missing libc functions
+AC_CHECK_FUNC(mkfifo,AC_DEFINE(HAVE_MKFIFO),AC_DEFINE(MKFIFO_MISSING))
+
+dnl checks for system calls
+AC_CHECK_FUNCS(dup2 eaccess fcntl getdtablesize getentropy getgroups \
+		gethostname getpagesize getpeername getrandom getrlimit \
+		getrusage gettimeofday kill killpg lstat pselect readlink \
+		select setdtablesize setitimer tcgetpgrp uname ulimit waitpid)
+AC_REPLACE_FUNCS(rename)
+
+dnl checks for c library functions
+AC_CHECK_FUNCS(bcopy bzero confstr faccessat fnmatch \
+		getaddrinfo gethostbyname getservbyname getservent inet_aton \
+		imaxdiv memmove pathconf putenv raise random regcomp regexec \
+		setenv setlinebuf setlocale setvbuf siginterrupt strchr \
+		sysconf syslog tcgetattr times ttyname tzset unsetenv)
+
+AC_CHECK_FUNCS(vasprintf asprintf)
+AC_CHECK_FUNCS(isascii isblank isgraph isprint isspace isxdigit)
+AC_CHECK_FUNCS(getpwent getpwnam getpwuid)
+AC_CHECK_FUNCS(mkstemp mkdtemp)
+AC_CHECK_FUNCS(arc4random)
+
+AC_REPLACE_FUNCS(getcwd memset)
+AC_REPLACE_FUNCS(strcasecmp strcasestr strerror strftime strnlen strpbrk strstr)
+AC_REPLACE_FUNCS(strtod strtol strtoul strtoll strtoull strtoimax strtoumax)
+AC_REPLACE_FUNCS(dprintf)
+AC_REPLACE_FUNCS(strchrnul)
+AC_REPLACE_FUNCS(strdup)
+
+AC_CHECK_HEADERS(libaudit.h)
+AC_CHECK_DECLS([AUDIT_USER_TTY],,, [[#include <linux/audit.h>]])
+
+AC_CHECK_DECLS([confstr])
+AC_CHECK_DECLS([printf])
+AC_CHECK_DECLS([sbrk])
+AC_CHECK_DECLS([setregid])
+dnl AC_CHECK_DECLS[(setresuid])
+dnl AC_CHECK_DECLS[(setresgid])
+AC_CHECK_DECLS([strcpy])
+AC_CHECK_DECLS([strsignal])
+
+AC_CHECK_FUNCS(setresuid setresgid)
+
+dnl Extra test to detect the horribly broken HP/UX 11.00 strtold(3)
+AC_CHECK_DECLS([strtold], [
+    AC_MSG_CHECKING([for broken strtold])
+    AC_CACHE_VAL(bash_cv_strtold_broken,
+	[AC_TRY_COMPILE(
+	    [#include <stdlib.h>],
+	    [long double r; char *foo, bar; r = strtold(foo, &bar);],
+	    bash_cv_strtold_broken=no, bash_cv_strtold_broken=yes,
+	    [AC_MSG_WARN(cannot check for broken strtold if cross-compiling, defaulting to no)])
+	]
+    )
+    AC_MSG_RESULT($bash_cv_strtold_broken)
+    if test "$bash_cv_strtold_broken" = "yes" ; then
+	AC_DEFINE(STRTOLD_BROKEN)
+    fi
+])
+
+BASH_CHECK_DECL(strtoimax)
+BASH_CHECK_DECL(strtol)
+BASH_CHECK_DECL(strtoll)
+BASH_CHECK_DECL(strtoul)
+BASH_CHECK_DECL(strtoull)
+BASH_CHECK_DECL(strtoumax)
+
+AC_FUNC_MKTIME
+
+dnl
+dnl Checks for lib/intl and related code (uses some of the output from
+dnl AM_GNU_GETTEXT)
+dnl
+
+AC_CHECK_HEADERS([argz.h errno.h fcntl.h malloc.h stdio_ext.h])
+
+dnl AC_FUNC_MALLOC
+AC_FUNC_MMAP
+AC_CHECK_FUNCS([__argz_count __argz_next __argz_stringify dcgettext mempcpy \
+		munmap mremap stpcpy strcspn])
+
+INTL_DEP= INTL_INC= LIBINTL_H=
+if test "x$USE_INCLUDED_LIBINTL" = "xyes"; then
+	INTL_DEP='${INTL_LIBDIR}/libintl.a'
+	INTL_INC='-I${INTL_LIBSRC} -I${INTL_BUILDDIR}'
+	LIBINTL_H='${INTL_BUILDDIR}/libintl.h'
+fi
+AC_SUBST(INTL_DEP)
+AC_SUBST(INTL_INC)
+AC_SUBST(LIBINTL_H)
+
+dnl
+dnl End of checks needed by files in lib/intl
+dnl
+
+BASH_CHECK_MULTIBYTE
+
+dnl checks for the dynamic loading library functions in libc and libdl
+if test "$opt_static_link" != yes; then
+AC_CHECK_LIB(dl, dlopen)
+AC_CHECK_FUNCS(dlopen dlclose dlsym)
+fi
+
+dnl this defines HAVE_DECL_SYS_SIGLIST
+AC_DECL_SYS_SIGLIST
+
+dnl network functions -- check for inet_aton again
+if test "$ac_cv_func_inet_aton" != 'yes'; then
+BASH_FUNC_INET_ATON
+fi
+
+dnl libraries
+dnl this is reportedly no longer necessary for irix[56].?
+case "$host_os" in
+irix4*)	AC_CHECK_LIB(sun, getpwent) ;;
+esac
+
+dnl check for getpeername in the socket library only if it's not in libc
+if test "$ac_cv_func_getpeername" = no; then
+	BASH_CHECK_LIB_SOCKET
+fi
+dnl check for gethostbyname in socket libraries if it's not in libc
+if test "$ac_cv_func_gethostbyname" = no; then
+	BASH_FUNC_GETHOSTBYNAME
+fi
+
+dnl system types
+AC_TYPE_GETGROUPS
+AC_TYPE_OFF_T
+AC_TYPE_MODE_T
+AC_TYPE_UID_T
+AC_TYPE_PID_T
+AC_TYPE_SIZE_T
+AC_TYPE_UINTPTR_T
+
+AC_CHECK_TYPE(ssize_t, int)
+AC_CHECK_TYPE(time_t, long)
+
+BASH_TYPE_LONG_LONG
+BASH_TYPE_UNSIGNED_LONG_LONG
+
+AC_TYPE_SIGNAL
+BASH_TYPE_SIG_ATOMIC_T
+
+AC_CHECK_SIZEOF(char, 1)
+AC_CHECK_SIZEOF(short, 2)
+AC_CHECK_SIZEOF(int, 4)
+AC_CHECK_SIZEOF(long, 4)
+AC_CHECK_SIZEOF(char *, 4)
+AC_CHECK_SIZEOF(double, 8)
+AC_CHECK_SIZEOF([long long], 8)
+
+AC_CHECK_TYPE(u_int, [unsigned int])
+AC_CHECK_TYPE(u_long, [unsigned long])
+
+BASH_TYPE_BITS16_T
+BASH_TYPE_U_BITS16_T
+BASH_TYPE_BITS32_T
+BASH_TYPE_U_BITS32_T
+BASH_TYPE_BITS64_T
+
+BASH_TYPE_PTRDIFF_T
+
+dnl structures
+AC_HEADER_STAT
+
+dnl system services
+AC_SYS_INTERPRETER
+if test $ac_cv_sys_interpreter = yes; then
+AC_DEFINE(HAVE_HASH_BANG_EXEC)
+fi
+
+dnl Miscellaneous Bash tests
+if test "$ac_cv_func_lstat" = "no"; then
+BASH_FUNC_LSTAT
+fi
+
+dnl behavior of system calls and library functions
+BASH_FUNC_CTYPE_NONASCII
+BASH_FUNC_DUP2_CLOEXEC_CHECK
+BASH_SYS_PGRP_SYNC
+BASH_SYS_SIGNAL_VINTAGE
+
+dnl checking for the presence of certain library symbols
+BASH_SYS_ERRLIST
+BASH_SYS_SIGLIST
+BASH_UNDER_SYS_SIGLIST
+
+dnl various system types
+BASH_TYPE_SIGHANDLER
+BASH_CHECK_TYPE(clock_t, [#include <sys/times.h>], long)
+BASH_CHECK_TYPE(sigset_t, [#include <signal.h>], int)
+BASH_CHECK_TYPE(sig_atomic_t, [#include <signal.h>], int)
+BASH_CHECK_TYPE(quad_t, , long, HAVE_QUAD_T)
+BASH_CHECK_TYPE(intmax_t, , $bash_cv_type_long_long)
+BASH_CHECK_TYPE(uintmax_t, , $bash_cv_type_unsigned_long_long)
+if test "$ac_cv_header_sys_socket_h" = "yes"; then
+BASH_CHECK_TYPE(socklen_t, [#include <sys/socket.h>], [unsigned int], HAVE_SOCKLEN_T)
+fi
+BASH_TYPE_RLIMIT
+
+AC_CHECK_SIZEOF(intmax_t, 8)
+
+dnl presence and contents of structures used by system calls
+BASH_STRUCT_TERMIOS_LDISC
+BASH_STRUCT_TERMIO_LDISC
+BASH_STRUCT_DIRENT_D_INO
+BASH_STRUCT_DIRENT_D_FILENO
+BASH_STRUCT_DIRENT_D_NAMLEN
+BASH_STRUCT_WINSIZE
+BASH_STRUCT_TIMEVAL
+AC_CHECK_MEMBERS([struct stat.st_blocks])
+AC_STRUCT_TM
+AC_STRUCT_TIMEZONE
+BASH_STRUCT_TIMEZONE
+
+BASH_STRUCT_WEXITSTATUS_OFFSET
+
+BASH_CHECK_TYPE_STRUCT_TIMESPEC
+BASH_STAT_TIME
+
+dnl checks for system calls
+BASH_FUNC_SBRK
+
+dnl presence and behavior of C library functions
+BASH_FUNC_STRSIGNAL
+BASH_FUNC_OPENDIR_CHECK
+BASH_FUNC_ULIMIT_MAXFDS
+BASH_FUNC_FPURGE
+BASH_FUNC_GETENV
+if test "$ac_cv_func_getcwd" = "yes"; then
+BASH_FUNC_GETCWD
+fi
+BASH_FUNC_POSIX_SETJMP
+BASH_FUNC_STRCOLL
+BASH_FUNC_SNPRINTF
+BASH_FUNC_VSNPRINTF
+
+dnl If putenv or unsetenv is not present, set the right define so the
+dnl prototype and declaration in lib/sh/getenv.c will be standard-conformant
+
+if test "$ac_cv_func_putenv" = "yes"; then
+BASH_FUNC_STD_PUTENV
+else
+AC_DEFINE(HAVE_STD_PUTENV)
+fi
+if test "$ac_cv_func_unsetenv" = "yes"; then
+BASH_FUNC_STD_UNSETENV
+else
+AC_DEFINE(HAVE_STD_UNSETENV)
+fi
+
+BASH_FUNC_PRINTF_A_FORMAT
+
+BASH_FUNC_FNMATCH_EQUIV_FALLBACK
+
+dnl presence and behavior of OS functions
+BASH_SYS_REINSTALL_SIGHANDLERS
+BASH_SYS_JOB_CONTROL_MISSING
+BASH_SYS_NAMED_PIPES
+
+dnl presence of certain CPP defines
+AC_HEADER_TIOCGWINSZ
+BASH_HAVE_TIOCSTAT
+BASH_HAVE_FIONREAD
+
+BASH_CHECK_WCONTINUED
+
+dnl miscellaneous
+BASH_CHECK_SPEED_T
+BASH_CHECK_GETPW_FUNCS
+BASH_CHECK_RTSIGS
+BASH_CHECK_SYS_SIGLIST
+
+dnl special checks
+case "$host_os" in
+hpux*)	BASH_CHECK_KERNEL_RLIMIT ;;
+esac
+
+if test "$opt_readline" = yes; then
+dnl yuck
+case "$host_os" in
+aix*)	prefer_curses=yes ;;
+esac
+BASH_CHECK_LIB_TERMCAP
+fi
+AC_SUBST(TERMCAP_LIB)
+AC_SUBST(TERMCAP_DEP)
+
+BASH_CHECK_DEV_FD
+BASH_CHECK_DEV_STDIN
+BASH_SYS_DEFAULT_MAIL_DIR
+
+if test "$bash_cv_job_control_missing" = missing; then
+	opt_job_control=no
+fi
+
+if test "$opt_job_control" = yes; then
+AC_DEFINE(JOB_CONTROL)
+JOBS_O=jobs.o
+else
+JOBS_O=nojobs.o
+fi
+
+AC_SUBST(JOBS_O)
+
+dnl Defines that we want to propagate to the Makefiles in subdirectories,
+dnl like glob and readline
+
+LOCAL_DEFS=-DSHELL
+
+dnl use this section to possibly define more cpp variables, specify local
+dnl libraries, and specify any additional local cc or ld flags
+dnl
+dnl most of these are really old; this should really go away someday
+
+case "${host_os}" in
+sysv4.2*)	AC_DEFINE(SVR4_2)
+		AC_DEFINE(SVR4) ;;
+sysv4*)		AC_DEFINE(SVR4) ;;
+sysv5*)		AC_DEFINE(SVR5) ;;
+hpux9*)		LOCAL_CFLAGS="-DHPUX9 -DHPUX -DTGETENT_BROKEN -DTGETFLAG_BROKEN" ;;
+hpux*)		LOCAL_CFLAGS="-DHPUX -DTGETENT_BROKEN -DTGETFLAG_BROKEN" ;;
+dgux*)		LOCAL_CFLAGS=-D_DGUX_SOURCE; LOCAL_LIBS=-ldgc ;;
+isc*)		LOCAL_CFLAGS=-Disc386 ;;
+rhapsody*)	LOCAL_CFLAGS=-DRHAPSODY ;;
+darwin*)	LOCAL_CFLAGS=-DMACOSX ;;
+sco3.2v5*)	LOCAL_CFLAGS="-b elf -DWAITPID_BROKEN -DPATH_MAX=1024" ;;
+sco3.2v4*)	LOCAL_CFLAGS="-DMUST_UNBLOCK_CHLD -DPATH_MAX=1024" ;;
+sco3.2*)	LOCAL_CFLAGS=-DMUST_UNBLOCK_CHLD ;;
+sunos4*)	LOCAL_CFLAGS=-DSunOS4 ;;
+solaris2.5*)	LOCAL_CFLAGS="-DSunOS5 -DSOLARIS" ;;
+solaris2.8*)	LOCAL_CFLAGS=-DSOLARIS  ;;
+solaris2.9*)	LOCAL_CFLAGS=-DSOLARIS  ;;
+solaris2.10*)	LOCAL_CFLAGS=-DSOLARIS  ;;
+solaris2*)	LOCAL_CFLAGS=-DSOLARIS ;;
+lynxos*)	LOCAL_CFLAGS=-DRECYCLES_PIDS ;;
+linux*)		LOCAL_LDFLAGS=-rdynamic		 # allow dynamic loading
+		case "`uname -r`" in
+		1.*|2.[[0123]]*)	: ;;
+		*)	AC_DEFINE(PGRP_PIPE) ;;
+		esac ;;
+netbsd*|openbsd*)	LOCAL_CFLAGS="-DDEV_FD_STAT_BROKEN" ;;
+freebsd*)	LOCAL_CFLAGS='-DHEREDOC_PIPESIZE=4096' ;;
+*qnx[[67]]*)	LOCAL_LIBS="-lncurses" ;;
+*qnx*)		LOCAL_CFLAGS="-Dqnx -F -3s" LOCAL_LDFLAGS="-3s" LOCAL_LIBS="-lunix -lncurses" ;;
+powerux*)	LOCAL_LIBS="-lgen" ;;
+cygwin*)	LOCAL_CFLAGS=-DRECYCLES_PIDS ;;
+opennt*|interix*) LOCAL_CFLAGS="-DNO_MAIN_ENV_ARG -DBROKEN_DIRENT_D_INO -D_POSIX_SOURCE -D_ALL_SOURCE -DRECYCLES_PIDS" ;;
+*openstep*)	LOCAL_CFLAGS="-D__APPLE_CC__" ;;
+esac
+
+dnl Stanza for OS/compiler pair-specific flags
+case "${host_os}-${CC}" in
+aix4.2*-*gcc*)	LOCAL_LDFLAGS="-Xlinker -bexpall -Xlinker -brtl" ;;
+aix4.2*)	LOCAL_LDFLAGS="-bexpall -brtl" ;;
+bsdi4*-*gcc*)	LOCAL_LDFLAGS="-rdynamic" ;;	# allow dynamic loading, like Linux
+bsdi5*-*gcc*)	LOCAL_LDFLAGS="-rdynamic" ;;	# allow dynamic loading, like Linux
+hpux11*-gcc*)	LOCAL_LDFLAGS="-Wl,-E" ;;	# allow dynamic loading
+esac
+
+dnl FreeBSD-3.x can have either a.out or ELF
+case "${host_os}" in
+freebsd[[3-9]]*)
+		if test -x /usr/bin/objformat && test "`/usr/bin/objformat`" = "elf" ; then
+			LOCAL_LDFLAGS=-rdynamic # allow dynamic loading
+		fi ;;
+freebsdelf*)	LOCAL_LDFLAGS=-rdynamic ;;	# allow dynamic loading
+dragonfly*)	LOCAL_LDFLAGS=-rdynamic ;;	# allow dynamic loading
+esac
+
+case "$host_cpu" in
+*cray*)		LOCAL_CFLAGS="-DCRAY" ;; # shell var so config.h can use it
+esac
+
+case "$host_cpu-$host_os" in
+ibmrt-*bsd4*)	LOCAL_CFLAGS="-ma -U__STDC__" ;;
+esac
+
+case "$host_cpu-$host_vendor-$host_os" in
+m88k-motorola-sysv3)	LOCAL_CFLAGS=-DWAITPID_BROKEN ;;
+mips-pyramid-sysv4)	LOCAL_CFLAGS=-Xa ;;
+esac
+
+# turn off paren warnings in gcc
+CFLAGS="$CFLAGS ${STYLE_CFLAGS}"
+
+#
+# Shared object configuration section.  These values are generated by
+# ${srcdir}/support/shobj-conf
+#
+if test "$ac_cv_func_dlopen" = "yes" && test -f ${srcdir}/support/shobj-conf
+then
+	AC_MSG_CHECKING(shared object configuration for loadable builtins)
+	eval `${CONFIG_SHELL-/bin/sh} ${srcdir}/support/shobj-conf -C "${CC}" -c "${host_cpu}" -o "${host_os}" -v "${host_vendor}"`
+	AC_SUBST(SHOBJ_CC)
+	AC_SUBST(SHOBJ_CFLAGS)
+	AC_SUBST(SHOBJ_LD)
+	AC_SUBST(SHOBJ_LDFLAGS)
+	AC_SUBST(SHOBJ_XLDFLAGS)
+	AC_SUBST(SHOBJ_LIBS)
+	AC_SUBST(SHOBJ_STATUS)
+	AC_MSG_RESULT($SHOBJ_STATUS)
+else
+	SHOBJ_STATUS=unsupported
+	AC_SUBST(SHOBJ_STATUS)
+fi
+
+# try to create a directory tree if the source is elsewhere
+# this should be packaged into a script accessible via ${srcdir}/support
+case "$srcdir" in
+.)	;;
+*)	for d in doc tests support lib examples; do	# dirs
+		test -d $d || mkdir $d
+	done
+	for ld in readline glob tilde malloc sh termcap; do	# libdirs
+		test -d lib/$ld || mkdir lib/$ld
+	done
+	test -d examples/loadables || mkdir examples/loadables	# loadable builtins
+	test -d examples/loadables/perl || mkdir examples/loadables/perl
+	;;
+esac
+
+BUILD_DIR=`pwd`
+case "$BUILD_DIR" in
+*\ *)	BUILD_DIR=`echo "$BUILD_DIR" | sed 's: :\\\\ :g'` ;;
+*)	;;
+esac
+
+if test -z "$localedir"; then
+	localedir='${datarootdir}/locale'
+fi
+if test -z "$datarootdir"; then
+	datarootdir='${prefix}/share'
+fi
+
+AC_SUBST(PROFILE_FLAGS)
+
+AC_SUBST(incdir)
+AC_SUBST(BUILD_DIR)
+
+# Some versions of autoconf don't substitute these automatically
+AC_SUBST(datarootdir)
+AC_SUBST(localedir)
+
+# directory where we install dynamically loadable builtins
+if test -z "$loadablesdir"; then
+	loadablesdir='${libdir}/bash'
+fi
+AC_SUBST(loadablesdir)
+if test -z "$headersdir"; then
+	headersdir='$(includedir)/$(PACKAGE_NAME)'
+fi
+AC_SUBST(headersdir)
+
+AC_SUBST(YACC)
+AC_SUBST(AR)
+AC_SUBST(ARFLAGS)
+
+AC_SUBST(BASHVERS)
+AC_SUBST(RELSTATUS)
+AC_SUBST(DEBUG)
+AC_SUBST(MALLOC_DEBUG)
+
+AC_SUBST(host_cpu)
+AC_SUBST(host_vendor)
+AC_SUBST(host_os)
+
+AC_SUBST(LOCAL_LIBS)
+AC_SUBST(LOCAL_CFLAGS)
+AC_SUBST(LOCAL_LDFLAGS)
+AC_SUBST(LOCAL_DEFS)
+
+#AC_SUBST(ALLOCA_SOURCE)
+#AC_SUBST(ALLOCA_OBJECT)
+
+AC_OUTPUT([Makefile builtins/Makefile lib/readline/Makefile lib/glob/Makefile \
+	  lib/intl/Makefile \
+	  lib/malloc/Makefile lib/sh/Makefile lib/termcap/Makefile \
+	  lib/tilde/Makefile doc/Makefile support/Makefile po/Makefile.in \
+	  examples/loadables/Makefile examples/loadables/Makefile.inc \
+	  examples/loadables/perl/Makefile \
+	  support/bash.pc support/bashbug.sh],
+[
+# Makefile uses this timestamp file to record whether config.h is up to date.
+echo timestamp > stamp-h
+])
diff --git a/conftypes.h b/conftypes.h
new file mode 100644
index 0000000..1c8c548
--- /dev/null
+++ b/conftypes.h
@@ -0,0 +1,58 @@
+/* conftypes.h -- defines for build and host system. */
+
+/* Copyright (C) 2001, 2005, 2008,2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_CONFTYPES_H_)
+#define _CONFTYPES_H_
+
+/* Placeholder for future modifications if cross-compiling or building a
+   `fat' binary, e.g. on Apple Rhapsody.  These values are used in multiple
+   files, so they appear here. */
+#if !defined (RHAPSODY) && !defined (MACOSX)
+#  define HOSTTYPE	CONF_HOSTTYPE
+#  define OSTYPE	CONF_OSTYPE
+#  define MACHTYPE	CONF_MACHTYPE
+#else /* RHAPSODY */
+#  if   defined(__powerpc__) || defined(__ppc__)
+#    define HOSTTYPE "powerpc"
+#  elif defined(__i386__)
+#    define HOSTTYPE "i386"
+#  else
+#    define HOSTTYPE CONF_HOSTTYPE
+#  endif
+
+#  define OSTYPE CONF_OSTYPE
+#  define VENDOR CONF_VENDOR
+
+#  define MACHTYPE HOSTTYPE "-" VENDOR "-" OSTYPE
+#endif /* RHAPSODY */
+
+#ifndef HOSTTYPE
+#  define HOSTTYPE "unknown"
+#endif
+
+#ifndef OSTYPE
+#  define OSTYPE "unknown"
+#endif
+
+#ifndef MACHTYPE
+#  define MACHTYPE "unknown"
+#endif
+
+#endif /* _CONFTYPES_H_ */
diff --git a/copy_cmd.c b/copy_cmd.c
new file mode 100644
index 0000000..758ff23
--- /dev/null
+++ b/copy_cmd.c
@@ -0,0 +1,459 @@
+/* copy_command.c -- copy a COMMAND structure.  This is needed
+   primarily for making function definitions, but I'm not sure
+   that anyone else will need it.  */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include "bashtypes.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+
+#include "shell.h"
+
+static PATTERN_LIST *copy_case_clause PARAMS((PATTERN_LIST *));
+static PATTERN_LIST *copy_case_clauses PARAMS((PATTERN_LIST *));
+static FOR_COM *copy_for_command PARAMS((FOR_COM *));
+#if defined (ARITH_FOR_COMMAND)
+static ARITH_FOR_COM *copy_arith_for_command PARAMS((ARITH_FOR_COM *));
+#endif
+static GROUP_COM *copy_group_command PARAMS((GROUP_COM *));
+static SUBSHELL_COM *copy_subshell_command PARAMS((SUBSHELL_COM *));
+static COPROC_COM *copy_coproc_command PARAMS((COPROC_COM *));
+static CASE_COM *copy_case_command PARAMS((CASE_COM *));
+static WHILE_COM *copy_while_command PARAMS((WHILE_COM *));
+static IF_COM *copy_if_command PARAMS((IF_COM *));
+#if defined (DPAREN_ARITHMETIC)
+static ARITH_COM *copy_arith_command PARAMS((ARITH_COM *));
+#endif
+#if defined (COND_COMMAND)
+static COND_COM *copy_cond_command PARAMS((COND_COM *));
+#endif
+static SIMPLE_COM *copy_simple_command PARAMS((SIMPLE_COM *));
+
+WORD_DESC *
+copy_word (w)
+     WORD_DESC *w;
+{
+  WORD_DESC *new_word;
+
+  new_word = make_bare_word (w->word);
+  new_word->flags = w->flags;
+  return (new_word);
+}
+
+/* Copy the chain of words in LIST.  Return a pointer to
+   the new chain. */
+WORD_LIST *
+copy_word_list (list)
+     WORD_LIST *list;
+{
+  WORD_LIST *new_list, *tl;
+
+  for (new_list = tl = (WORD_LIST *)NULL; list; list = list->next)
+    {
+      if (new_list == 0)
+	new_list = tl = make_word_list (copy_word (list->word), new_list);
+      else
+	{
+	  tl->next = make_word_list (copy_word (list->word), (WORD_LIST *)NULL);
+	  tl = tl->next;
+	}
+    }
+
+  return (new_list);
+}
+
+static PATTERN_LIST *
+copy_case_clause (clause)
+     PATTERN_LIST *clause;
+{
+  PATTERN_LIST *new_clause;
+
+  new_clause = (PATTERN_LIST *)xmalloc (sizeof (PATTERN_LIST));
+  new_clause->patterns = copy_word_list (clause->patterns);
+  new_clause->action = copy_command (clause->action);
+  new_clause->flags = clause->flags;
+  return (new_clause);
+}
+
+static PATTERN_LIST *
+copy_case_clauses (clauses)
+     PATTERN_LIST *clauses;
+{
+  PATTERN_LIST *new_list, *new_clause;
+
+  for (new_list = (PATTERN_LIST *)NULL; clauses; clauses = clauses->next)
+    {
+      new_clause = copy_case_clause (clauses);
+      new_clause->next = new_list;
+      new_list = new_clause;
+    }
+  return (REVERSE_LIST (new_list, PATTERN_LIST *));
+}
+
+/* Copy a single redirect. */
+REDIRECT *
+copy_redirect (redirect)
+     REDIRECT *redirect;
+{
+  REDIRECT *new_redirect;
+
+  new_redirect = (REDIRECT *)xmalloc (sizeof (REDIRECT));
+#if 0
+  FASTCOPY ((char *)redirect, (char *)new_redirect, (sizeof (REDIRECT)));
+#else
+  *new_redirect = *redirect;	/* let the compiler do the fast structure copy */
+#endif
+
+  if (redirect->rflags & REDIR_VARASSIGN)
+    new_redirect->redirector.filename = copy_word (redirect->redirector.filename);
+
+  switch (redirect->instruction)
+    {
+    case r_reading_until:
+    case r_deblank_reading_until:
+      new_redirect->here_doc_eof = redirect->here_doc_eof ? savestring (redirect->here_doc_eof) : 0;
+      /*FALLTHROUGH*/
+    case r_reading_string:
+    case r_appending_to:
+    case r_output_direction:
+    case r_input_direction:
+    case r_inputa_direction:
+    case r_err_and_out:
+    case r_append_err_and_out:
+    case r_input_output:
+    case r_output_force:
+    case r_duplicating_input_word:
+    case r_duplicating_output_word:
+    case r_move_input_word:
+    case r_move_output_word:
+      new_redirect->redirectee.filename = copy_word (redirect->redirectee.filename);
+      break;
+    case r_duplicating_input:
+    case r_duplicating_output:
+    case r_move_input:
+    case r_move_output:
+    case r_close_this:
+      break;
+    }
+  return (new_redirect);
+}
+
+REDIRECT *
+copy_redirects (list)
+     REDIRECT *list;
+{
+  REDIRECT *new_list, *temp;
+
+  for (new_list = (REDIRECT *)NULL; list; list = list->next)
+    {
+      temp = copy_redirect (list);
+      temp->next = new_list;
+      new_list = temp;
+    }
+  return (REVERSE_LIST (new_list, REDIRECT *));
+}
+
+static FOR_COM *
+copy_for_command (com)
+     FOR_COM *com;
+{
+  FOR_COM *new_for;
+
+  new_for = (FOR_COM *)xmalloc (sizeof (FOR_COM));
+  new_for->flags = com->flags;
+  new_for->line = com->line;
+  new_for->name = copy_word (com->name);
+  new_for->map_list = copy_word_list (com->map_list);
+  new_for->action = copy_command (com->action);
+  return (new_for);
+}
+
+#if defined (ARITH_FOR_COMMAND)
+static ARITH_FOR_COM *
+copy_arith_for_command (com)
+     ARITH_FOR_COM *com;
+{
+  ARITH_FOR_COM *new_arith_for;
+
+  new_arith_for = (ARITH_FOR_COM *)xmalloc (sizeof (ARITH_FOR_COM));
+  new_arith_for->flags = com->flags;
+  new_arith_for->line = com->line;
+  new_arith_for->init = copy_word_list (com->init);
+  new_arith_for->test = copy_word_list (com->test);
+  new_arith_for->step = copy_word_list (com->step);
+  new_arith_for->action = copy_command (com->action);
+  return (new_arith_for);
+}
+#endif /* ARITH_FOR_COMMAND */
+
+static GROUP_COM *
+copy_group_command (com)
+     GROUP_COM *com;
+{
+  GROUP_COM *new_group;
+
+  new_group = (GROUP_COM *)xmalloc (sizeof (GROUP_COM));
+  new_group->command = copy_command (com->command);
+  return (new_group);
+}
+
+static SUBSHELL_COM *
+copy_subshell_command (com)
+     SUBSHELL_COM *com;
+{
+  SUBSHELL_COM *new_subshell;
+
+  new_subshell = (SUBSHELL_COM *)xmalloc (sizeof (SUBSHELL_COM));
+  new_subshell->command = copy_command (com->command);
+  new_subshell->flags = com->flags;
+  new_subshell->line = com->line;
+  return (new_subshell);
+}
+
+static COPROC_COM *
+copy_coproc_command (com)
+     COPROC_COM *com;
+{
+  COPROC_COM *new_coproc;
+
+  new_coproc = (COPROC_COM *)xmalloc (sizeof (COPROC_COM));
+  new_coproc->name = savestring (com->name);
+  new_coproc->command = copy_command (com->command);
+  new_coproc->flags = com->flags;
+  return (new_coproc);
+}
+
+static CASE_COM *
+copy_case_command (com)
+     CASE_COM *com;
+{
+  CASE_COM *new_case;
+
+  new_case = (CASE_COM *)xmalloc (sizeof (CASE_COM));
+  new_case->flags = com->flags;
+  new_case->line = com->line;
+  new_case->word = copy_word (com->word);
+  new_case->clauses = copy_case_clauses (com->clauses);
+  return (new_case);
+}
+
+static WHILE_COM *
+copy_while_command (com)
+     WHILE_COM *com;
+{
+  WHILE_COM *new_while;
+
+  new_while = (WHILE_COM *)xmalloc (sizeof (WHILE_COM));
+  new_while->flags = com->flags;
+  new_while->test = copy_command (com->test);
+  new_while->action = copy_command (com->action);
+  return (new_while);
+}
+
+static IF_COM *
+copy_if_command (com)
+     IF_COM *com;
+{
+  IF_COM *new_if;
+
+  new_if = (IF_COM *)xmalloc (sizeof (IF_COM));
+  new_if->flags = com->flags;
+  new_if->test = copy_command (com->test);
+  new_if->true_case = copy_command (com->true_case);
+  new_if->false_case = com->false_case ? copy_command (com->false_case) : com->false_case;
+  return (new_if);
+}
+
+#if defined (DPAREN_ARITHMETIC)
+static ARITH_COM *
+copy_arith_command (com)
+     ARITH_COM *com;
+{
+  ARITH_COM *new_arith;
+
+  new_arith = (ARITH_COM *)xmalloc (sizeof (ARITH_COM));
+  new_arith->flags = com->flags;
+  new_arith->exp = copy_word_list (com->exp);
+  new_arith->line = com->line;
+
+  return (new_arith);
+}
+#endif
+
+#if defined (COND_COMMAND)
+static COND_COM *
+copy_cond_command (com)
+     COND_COM *com;
+{
+  COND_COM *new_cond;
+
+  new_cond = (COND_COM *)xmalloc (sizeof (COND_COM));
+  new_cond->flags = com->flags;
+  new_cond->line = com->line;
+  new_cond->type = com->type;
+  new_cond->op = com->op ? copy_word (com->op) : com->op;
+  new_cond->left = com->left ? copy_cond_command (com->left) : (COND_COM *)NULL;
+  new_cond->right = com->right ? copy_cond_command (com->right) : (COND_COM *)NULL;
+
+  return (new_cond);
+}
+#endif
+
+static SIMPLE_COM *
+copy_simple_command (com)
+     SIMPLE_COM *com;
+{
+  SIMPLE_COM *new_simple;
+
+  new_simple = (SIMPLE_COM *)xmalloc (sizeof (SIMPLE_COM));
+  new_simple->flags = com->flags;
+  new_simple->words = copy_word_list (com->words);
+  new_simple->redirects = com->redirects ? copy_redirects (com->redirects) : (REDIRECT *)NULL;
+  new_simple->line = com->line;
+  return (new_simple);
+}
+
+FUNCTION_DEF *
+copy_function_def_contents (old, new_def)
+     FUNCTION_DEF *old, *new_def;
+{
+  new_def->name = copy_word (old->name);
+  new_def->command = old->command ? copy_command (old->command) : old->command;
+  new_def->flags = old->flags;
+  new_def->line = old->line;
+  new_def->source_file = old->source_file ? savestring (old->source_file) : old->source_file;
+  return (new_def);
+}
+
+FUNCTION_DEF *
+copy_function_def (com)
+     FUNCTION_DEF *com;
+{
+  FUNCTION_DEF *new_def;
+
+  new_def = (FUNCTION_DEF *)xmalloc (sizeof (FUNCTION_DEF));
+  new_def = copy_function_def_contents (com, new_def);
+  return (new_def);
+}
+
+/* Copy the command structure in COMMAND.  Return a pointer to the
+   copy.  Don't you forget to dispose_command () on this pointer
+   later! */
+COMMAND *
+copy_command (command)
+     COMMAND *command;
+{
+  COMMAND *new_command;
+
+  if (command == NULL)
+    return (command);
+
+  new_command = (COMMAND *)xmalloc (sizeof (COMMAND));
+  FASTCOPY ((char *)command, (char *)new_command, sizeof (COMMAND));
+  new_command->flags = command->flags;
+  new_command->line = command->line;
+
+  if (command->redirects)
+    new_command->redirects = copy_redirects (command->redirects);
+
+  switch (command->type)
+    {
+      case cm_for:
+	new_command->value.For = copy_for_command (command->value.For);
+	break;
+
+#if defined (ARITH_FOR_COMMAND)
+      case cm_arith_for:
+	new_command->value.ArithFor = copy_arith_for_command (command->value.ArithFor);
+	break;
+#endif
+
+#if defined (SELECT_COMMAND)
+      case cm_select:
+	new_command->value.Select =
+	  (SELECT_COM *)copy_for_command ((FOR_COM *)command->value.Select);
+	break;
+#endif
+
+      case cm_group:
+	new_command->value.Group = copy_group_command (command->value.Group);
+	break;
+
+      case cm_subshell:
+	new_command->value.Subshell = copy_subshell_command (command->value.Subshell);
+	break;
+
+      case cm_coproc:
+	new_command->value.Coproc = copy_coproc_command (command->value.Coproc);
+	break;
+
+      case cm_case:
+	new_command->value.Case = copy_case_command (command->value.Case);
+	break;
+
+      case cm_until:
+      case cm_while:
+	new_command->value.While = copy_while_command (command->value.While);
+	break;
+
+      case cm_if:
+	new_command->value.If = copy_if_command (command->value.If);
+	break;
+
+#if defined (DPAREN_ARITHMETIC)
+      case cm_arith:
+	new_command->value.Arith = copy_arith_command (command->value.Arith);
+	break;
+#endif
+
+#if defined (COND_COMMAND)
+      case cm_cond:
+	new_command->value.Cond = copy_cond_command (command->value.Cond);
+	break;
+#endif
+
+      case cm_simple:
+	new_command->value.Simple = copy_simple_command (command->value.Simple);
+	break;
+
+      case cm_connection:
+	{
+	  CONNECTION *new_connection;
+
+	  new_connection = (CONNECTION *)xmalloc (sizeof (CONNECTION));
+	  new_connection->connector = command->value.Connection->connector;
+	  new_connection->first = copy_command (command->value.Connection->first);
+	  new_connection->second = copy_command (command->value.Connection->second);
+	  new_command->value.Connection = new_connection;
+	  break;
+	}
+
+      case cm_function_def:
+	new_command->value.Function_def = copy_function_def (command->value.Function_def);
+	break;
+    }
+  return (new_command);
+}
diff --git a/cross-build/cygwin32.cache b/cross-build/cygwin32.cache
new file mode 100644
index 0000000..36948da
--- /dev/null
+++ b/cross-build/cygwin32.cache
@@ -0,0 +1,251 @@
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overriden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+ac_cv_build=${ac_cv_build='i686-pc-cygwin'}
+ac_cv_build_alias=${ac_cv_build_alias='i686-pc-cygwin'}
+ac_cv_c_bigendian=${ac_cv_c_bigendian='no'}
+ac_cv_c_char_unsigned=${ac_cv_c_char_unsigned='no'}
+ac_cv_c_compiler_gnu=${ac_cv_c_compiler_gnu='yes'}
+ac_cv_c_const=${ac_cv_c_const='yes'}
+ac_cv_c_inline=${ac_cv_c_inline='inline'}
+ac_cv_c_long_double=${ac_cv_c_long_double='yes'}
+ac_cv_c_stringize=${ac_cv_c_stringize='yes'}
+ac_cv_decl_sys_siglist=${ac_cv_decl_sys_siglist='no'}
+ac_cv_exeext=${ac_cv_exeext='.exe'}
+ac_cv_func___setostype=${ac_cv_func___setostype='no'}
+ac_cv_func__doprnt=${ac_cv_func__doprnt='no'}
+ac_cv_func_alloca_works=${ac_cv_func_alloca_works='yes'}
+ac_cv_func_asprintf=${ac_cv_func_asprintf='no'}
+ac_cv_func_bcopy=${ac_cv_func_bcopy='yes'}
+ac_cv_func_bindtextdomain=${ac_cv_func_bindtextdomain='no'}
+ac_cv_func_bzero=${ac_cv_func_bzero='yes'}
+ac_cv_func_confstr=${ac_cv_func_confstr='no'}
+ac_cv_func_dlclose=${ac_cv_func_dlclose='yes'}
+ac_cv_func_dlopen=${ac_cv_func_dlopen='yes'}
+ac_cv_func_dlsym=${ac_cv_func_dlsym='yes'}
+ac_cv_func_dup2=${ac_cv_func_dup2='yes'}
+ac_cv_func_fnmatch=${ac_cv_func_fnmatch='no'}
+ac_cv_func_getaddrinfo=${ac_cv_func_getaddrinfo='no'}
+ac_cv_func_getcwd=${ac_cv_func_getcwd='yes'}
+ac_cv_func_getdtablesize=${ac_cv_func_getdtablesize='yes'}
+ac_cv_func_getgroups=${ac_cv_func_getgroups='yes'}
+ac_cv_func_gethostbyname=${ac_cv_func_gethostbyname='yes'}
+ac_cv_func_gethostname=${ac_cv_func_gethostname='yes'}
+ac_cv_func_getpagesize=${ac_cv_func_getpagesize='yes'}
+ac_cv_func_getpeername=${ac_cv_func_getpeername='yes'}
+ac_cv_func_getpgrp_void=${ac_cv_func_getpgrp_void='yes'}
+ac_cv_func_getrlimit=${ac_cv_func_getrlimit='yes'}
+ac_cv_func_getrusage=${ac_cv_func_getrusage='yes'}
+ac_cv_func_getservbyname=${ac_cv_func_getservbyname='yes'}
+ac_cv_func_gettext=${ac_cv_func_gettext='no'}
+ac_cv_func_gettimeofday=${ac_cv_func_gettimeofday='yes'}
+ac_cv_func_inet_aton=${ac_cv_func_inet_aton='yes'}
+ac_cv_func_isascii=${ac_cv_func_isascii='yes'}
+ac_cv_func_isblank=${ac_cv_func_isblank='no'}
+ac_cv_func_isgraph=${ac_cv_func_isgraph='yes'}
+ac_cv_func_isprint=${ac_cv_func_isprint='yes'}
+ac_cv_func_isspace=${ac_cv_func_isspace='yes'}
+ac_cv_func_isxdigit=${ac_cv_func_isxdigit='yes'}
+ac_cv_func_killpg=${ac_cv_func_killpg='yes'}
+ac_cv_func_lstat=${ac_cv_func_lstat='yes'}
+ac_cv_func_memmove=${ac_cv_func_memmove='yes'}
+ac_cv_func_mkfifo=${ac_cv_func_mkfifo='yes'}
+ac_cv_func_pathconf=${ac_cv_func_pathconf='yes'}
+ac_cv_func_putenv=${ac_cv_func_putenv='yes'}
+ac_cv_func_readlink=${ac_cv_func_readlink='yes'}
+ac_cv_func_rename=${ac_cv_func_rename='yes'}
+ac_cv_func_sbrk=${ac_cv_func_sbrk='yes'}
+ac_cv_func_select=${ac_cv_func_select='yes'}
+ac_cv_func_setdtablesize=${ac_cv_func_setdtablesize='yes'}
+ac_cv_func_setenv=${ac_cv_func_setenv='yes'}
+ac_cv_func_setlinebuf=${ac_cv_func_setlinebuf='no'}
+ac_cv_func_setlocale=${ac_cv_func_setlocale='yes'}
+ac_cv_func_setvbuf=${ac_cv_func_setvbuf='yes'}
+ac_cv_func_setvbuf_reversed=${ac_cv_func_setvbuf_reversed='no'}
+ac_cv_func_siginterrupt=${ac_cv_func_siginterrupt='no'}
+ac_cv_func_snprintf=${ac_cv_func_snprintf='yes'}
+ac_cv_func_strcasecmp=${ac_cv_func_strcasecmp='yes'}
+ac_cv_func_strchr=${ac_cv_func_strchr='yes'}
+ac_cv_func_strcoll_works=${ac_cv_func_strcoll_works='yes'}
+ac_cv_func_strerror=${ac_cv_func_strerror='yes'}
+ac_cv_func_strpbrk=${ac_cv_func_strpbrk='yes'}
+ac_cv_func_strtod=${ac_cv_func_strtod='yes'}
+ac_cv_func_strtoimax=${ac_cv_func_strtoimax='no'}
+ac_cv_func_strtol=${ac_cv_func_strtol='yes'}
+ac_cv_func_strtoll=${ac_cv_func_strtoll='no'}
+ac_cv_func_strtoul=${ac_cv_func_strtoul='yes'}
+ac_cv_func_strtoull=${ac_cv_func_strtoull='no'}
+ac_cv_func_strtoumax=${ac_cv_func_strtoumax='no'}
+ac_cv_func_sysconf=${ac_cv_func_sysconf='yes'}
+ac_cv_func_tcgetattr=${ac_cv_func_tcgetattr='yes'}
+ac_cv_func_tcgetpgrp=${ac_cv_func_tcgetpgrp='yes'}
+ac_cv_func_textdomain=${ac_cv_func_textdomain='no'}
+ac_cv_func_times=${ac_cv_func_times='yes'}
+ac_cv_func_ttyname=${ac_cv_func_ttyname='yes'}
+ac_cv_func_tzset=${ac_cv_func_tzset='yes'}
+ac_cv_func_ulimit=${ac_cv_func_ulimit='no'}
+ac_cv_func_uname=${ac_cv_func_uname='yes'}
+ac_cv_func_vasprintf=${ac_cv_func_vasprintf='no'}
+ac_cv_func_vprintf=${ac_cv_func_vprintf='yes'}
+ac_cv_func_vsnprintf=${ac_cv_func_vsnprintf='yes'}
+ac_cv_func_wait3=${ac_cv_func_wait3='yes'}
+ac_cv_func_waitpid=${ac_cv_func_waitpid='yes'}
+ac_cv_have_decl_confstr=${ac_cv_have_decl_confstr='no'}
+ac_cv_have_decl_printf=${ac_cv_have_decl_printf='yes'}
+ac_cv_have_decl_sbrk=${ac_cv_have_decl_sbrk='yes'}
+ac_cv_have_decl_strsignal=${ac_cv_have_decl_strsignal='yes'}
+ac_cv_have_decl_strtold=${ac_cv_have_decl_strtold='no'}
+ac_cv_header_arpa_inet_h=${ac_cv_header_arpa_inet_h='yes'}
+ac_cv_header_dirent_dirent_h=${ac_cv_header_dirent_dirent_h='yes'}
+ac_cv_header_dlfcn_h=${ac_cv_header_dlfcn_h='yes'}
+ac_cv_header_grp_h=${ac_cv_header_grp_h='yes'}
+ac_cv_header_inttypes_h=${ac_cv_header_inttypes_h='no'}
+ac_cv_header_libintl_h=${ac_cv_header_libintl_h='yes'}
+ac_cv_header_limits_h=${ac_cv_header_limits_h='yes'}
+ac_cv_header_locale_h=${ac_cv_header_locale_h='yes'}
+ac_cv_header_memory_h=${ac_cv_header_memory_h='yes'}
+ac_cv_header_minix_config_h=${ac_cv_header_minix_config_h='no'}
+ac_cv_header_netdb_h=${ac_cv_header_netdb_h='yes'}
+ac_cv_header_netinet_in_h=${ac_cv_header_netinet_in_h='yes'}
+ac_cv_header_stat_broken=${ac_cv_header_stat_broken='no'}
+ac_cv_header_stdarg_h=${ac_cv_header_stdarg_h='yes'}
+ac_cv_header_stdc=${ac_cv_header_stdc='yes'}
+ac_cv_header_stddef_h=${ac_cv_header_stddef_h='yes'}
+ac_cv_header_stdint_h=${ac_cv_header_stdint_h='no'}
+ac_cv_header_stdlib_h=${ac_cv_header_stdlib_h='yes'}
+ac_cv_header_string_h=${ac_cv_header_string_h='yes'}
+ac_cv_header_strings_h=${ac_cv_header_strings_h='yes'}
+ac_cv_header_sys_file_h=${ac_cv_header_sys_file_h='yes'}
+ac_cv_header_sys_param_h=${ac_cv_header_sys_param_h='yes'}
+ac_cv_header_sys_pte_h=${ac_cv_header_sys_pte_h='no'}
+ac_cv_header_sys_ptem_h=${ac_cv_header_sys_ptem_h='no'}
+ac_cv_header_sys_resource_h=${ac_cv_header_sys_resource_h='yes'}
+ac_cv_header_sys_select_h=${ac_cv_header_sys_select_h='yes'}
+ac_cv_header_sys_socket_h=${ac_cv_header_sys_socket_h='yes'}
+ac_cv_header_sys_stat_h=${ac_cv_header_sys_stat_h='yes'}
+ac_cv_header_sys_stream_h=${ac_cv_header_sys_stream_h='no'}
+ac_cv_header_sys_time_h=${ac_cv_header_sys_time_h='yes'}
+ac_cv_header_sys_times_h=${ac_cv_header_sys_times_h='yes'}
+ac_cv_header_sys_types_h=${ac_cv_header_sys_types_h='yes'}
+ac_cv_header_sys_wait_h=${ac_cv_header_sys_wait_h='yes'}
+ac_cv_header_termcap_h=${ac_cv_header_termcap_h='yes'}
+ac_cv_header_termio_h=${ac_cv_header_termio_h='yes'}
+ac_cv_header_termios_h=${ac_cv_header_termios_h='yes'}
+ac_cv_header_time=${ac_cv_header_time='yes'}
+ac_cv_header_unistd_h=${ac_cv_header_unistd_h='yes'}
+ac_cv_header_varargs_h=${ac_cv_header_varargs_h='yes'}
+ac_cv_host=${ac_cv_host='i686-pc-cygwin'}
+ac_cv_host_alias=${ac_cv_host_alias='i686-pc-cygwin'}
+ac_cv_lib_dir_opendir=${ac_cv_lib_dir_opendir='no'}
+ac_cv_lib_dl_dlopen=${ac_cv_lib_dl_dlopen='no'}
+ac_cv_lib_intl_bindtextdomain=${ac_cv_lib_intl_bindtextdomain='yes'}
+ac_cv_lib_termcap_tgetent=${ac_cv_lib_termcap_tgetent='yes'}
+ac_cv_member_struct_stat_st_blocks=${ac_cv_member_struct_stat_st_blocks='yes'}
+ac_cv_member_struct_termio_c_line=${ac_cv_member_struct_termio_c_line='yes'}
+ac_cv_member_struct_termios_c_line=${ac_cv_member_struct_termios_c_line='yes'}
+ac_cv_objext=${ac_cv_objext='o'}
+ac_cv_path_install=${ac_cv_path_install='/usr/bin/install -c'}
+ac_cv_prog_AR=${ac_cv_prog_AR='ar'}
+ac_cv_prog_CPP=${ac_cv_prog_CPP='gcc -E'}
+ac_cv_prog_YACC=${ac_cv_prog_YACC='bison -y'}
+ac_cv_prog_ac_ct_CC=${ac_cv_prog_ac_ct_CC='gcc'}
+ac_cv_prog_ac_ct_RANLIB=${ac_cv_prog_ac_ct_RANLIB='ranlib'}
+ac_cv_prog_cc_g=${ac_cv_prog_cc_g='yes'}
+ac_cv_prog_cc_stdc=${ac_cv_prog_cc_stdc=''}
+ac_cv_prog_gcc_traditional=${ac_cv_prog_gcc_traditional='no'}
+ac_cv_prog_make_make_set=${ac_cv_prog_make_make_set='yes'}
+ac_cv_sizeof_char=${ac_cv_sizeof_char='1'}
+ac_cv_sizeof_char_p=${ac_cv_sizeof_char_p='4'}
+ac_cv_sizeof_double=${ac_cv_sizeof_double='8'}
+ac_cv_sizeof_int=${ac_cv_sizeof_int='4'}
+ac_cv_sizeof_long=${ac_cv_sizeof_long='4'}
+ac_cv_sizeof_long_long=${ac_cv_sizeof_long_long='8'}
+ac_cv_sizeof_short=${ac_cv_sizeof_short='2'}
+ac_cv_sys_file_offset_bits=${ac_cv_sys_file_offset_bits='no'}
+ac_cv_sys_interpreter=${ac_cv_sys_interpreter='yes'}
+ac_cv_sys_large_files=${ac_cv_sys_large_files='no'}
+ac_cv_sys_largefile_CC=${ac_cv_sys_largefile_CC='no'}
+ac_cv_sys_posix_termios=${ac_cv_sys_posix_termios='yes'}
+ac_cv_sys_tiocgwinsz_in_termios_h=${ac_cv_sys_tiocgwinsz_in_termios_h='yes'}
+ac_cv_type_bits16_t=${ac_cv_type_bits16_t='no'}
+ac_cv_type_bits32_t=${ac_cv_type_bits32_t='no'}
+ac_cv_type_bits64_t=${ac_cv_type_bits64_t='no'}
+ac_cv_type_char=${ac_cv_type_char='yes'}
+ac_cv_type_char_p=${ac_cv_type_char_p='yes'}
+ac_cv_type_double=${ac_cv_type_double='yes'}
+ac_cv_type_getgroups=${ac_cv_type_getgroups='gid_t'}
+ac_cv_type_int=${ac_cv_type_int='yes'}
+ac_cv_type_long=${ac_cv_type_long='yes'}
+ac_cv_type_long_long=${ac_cv_type_long_long='yes'}
+ac_cv_type_mode_t=${ac_cv_type_mode_t='yes'}
+ac_cv_type_off_t=${ac_cv_type_off_t='yes'}
+ac_cv_type_pid_t=${ac_cv_type_pid_t='yes'}
+ac_cv_type_ptrdiff_t=${ac_cv_type_ptrdiff_t='yes'}
+ac_cv_type_short=${ac_cv_type_short='yes'}
+ac_cv_type_signal=${ac_cv_type_signal='void'}
+ac_cv_type_size_t=${ac_cv_type_size_t='yes'}
+ac_cv_type_ssize_t=${ac_cv_type_ssize_t='yes'}
+ac_cv_type_time_t=${ac_cv_type_time_t='yes'}
+ac_cv_type_u_bits16_t=${ac_cv_type_u_bits16_t='no'}
+ac_cv_type_u_bits32_t=${ac_cv_type_u_bits32_t='no'}
+ac_cv_type_u_int=${ac_cv_type_u_int='yes'}
+ac_cv_type_u_long=${ac_cv_type_u_long='yes'}
+ac_cv_type_uid_t=${ac_cv_type_uid_t='yes'}
+ac_cv_working_alloca_h=${ac_cv_working_alloca_h='no'}
+
+bash_cv_decl_strtoimax=${bash_cv_decl_strtoimax='no'}
+bash_cv_decl_strtol=${bash_cv_decl_strtol='yes'}
+bash_cv_decl_strtoll=${bash_cv_decl_strtoll='no'}
+bash_cv_decl_strtoul=${bash_cv_decl_strtoul='yes'}
+bash_cv_decl_strtoull=${bash_cv_decl_strtoull='no'}
+bash_cv_decl_strtoumax=${bash_cv_decl_strtoumax='no'}
+bash_cv_decl_under_sys_siglist=${bash_cv_decl_under_sys_siglist='no'}
+bash_cv_dev_fd=${bash_cv_dev_fd='absent'}
+bash_cv_dev_stdin=${bash_cv_dev_stdin='absent'}
+bash_cv_dirent_has_d_fileno=${bash_cv_dirent_has_d_fileno='no'}
+bash_cv_dirent_has_dino=${bash_cv_dirent_has_dino='yes'}
+bash_cv_dup2_broken=${bash_cv_dup2_broken='no'}
+bash_cv_fionread_in_ioctl=${bash_cv_fionread_in_ioctl='no'}
+bash_cv_func_sigsetjmp=${bash_cv_func_sigsetjmp='present'}
+bash_cv_func_strcoll_broken=${bash_cv_func_strcoll_broken='no'}
+bash_cv_getenv_redef=${bash_cv_getenv_redef='yes'}
+bash_cv_getpw_declared=${bash_cv_getpw_declared='yes'}
+bash_cv_have_strsignal=${bash_cv_have_strsignal='yes'}
+bash_cv_job_control_missing=${bash_cv_job_control_missing='present'}
+bash_cv_mail_dir=${bash_cv_mail_dir='unknown'}
+bash_cv_must_reinstall_sighandlers=${bash_cv_must_reinstall_sighandlers='no'}
+bash_cv_opendir_not_robust=${bash_cv_opendir_not_robust='no'}
+bash_cv_pgrp_pipe=${bash_cv_pgrp_pipe='no'}
+bash_cv_printf_a_format=${bash_cv_printf_a_format='no'}
+bash_cv_signal_vintage=${bash_cv_signal_vintage='posix'}
+bash_cv_speed_t_in_sys_types=${bash_cv_speed_t_in_sys_types='no'}
+bash_cv_struct_timeval=${bash_cv_struct_timeval='yes'}
+bash_cv_struct_winsize_header=${bash_cv_struct_winsize_header='termios_h'}
+bash_cv_sys_errlist=${bash_cv_sys_errlist='no'}
+bash_cv_sys_named_pipes=${bash_cv_sys_named_pipes='present'}
+bash_cv_sys_siglist=${bash_cv_sys_siglist='no'}
+bash_cv_termcap_lib=${bash_cv_termcap_lib='libtermcap'}
+bash_cv_tiocstat_in_ioctl=${bash_cv_tiocstat_in_ioctl='no'}
+bash_cv_type_clock_t=${bash_cv_type_clock_t='yes'}
+bash_cv_type_intmax_t=${bash_cv_type_intmax_t='no'}
+bash_cv_type_long_long=${bash_cv_type_long_long='long long'}
+bash_cv_type_quad_t=${bash_cv_type_quad_t='no'}
+bash_cv_type_rlimit=${bash_cv_type_rlimit='rlim_t'}
+bash_cv_type_sigset_t=${bash_cv_type_sigset_t='yes'}
+bash_cv_type_socklen_t=${bash_cv_type_socklen_t='no'}
+bash_cv_type_uintmax_t=${bash_cv_type_uintmax_t='no'}
+bash_cv_type_unsigned_long_long=${bash_cv_type_unsigned_long_long='unsigned long long'}
+bash_cv_ulimit_maxfds=${bash_cv_ulimit_maxfds='no'}
+bash_cv_under_sys_siglist=${bash_cv_under_sys_siglist='no'}
+bash_cv_unusable_rtsigs=${bash_cv_unusable_rtsigs='no'}
+bash_cv_void_sighandler=${bash_cv_void_sighandler='yes'}
diff --git a/cross-build/opennt.cache b/cross-build/opennt.cache
new file mode 100644
index 0000000..ca5e7cd
--- /dev/null
+++ b/cross-build/opennt.cache
@@ -0,0 +1,169 @@
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs.  It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already.  You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+ac_cv_c_bigendian=${ac_cv_c_bigendian=no}
+ac_cv_decl_sys_siglist=${ac_cv_decl_sys_siglist=no}
+ac_cv_func___setostype=${ac_cv_func___setostype=no}
+ac_cv_func_alloca_works=${ac_cv_func_alloca_works=yes}
+ac_cv_func_bcopy=${ac_cv_func_bcopy=yes}
+ac_cv_func_bindtextdomain=${ac_cv_func_bindtextdomain=no}
+ac_cv_func_bzero=${ac_cv_func_bzero=yes}
+ac_cv_func_confstr=${ac_cv_func_confstr=yes}
+ac_cv_func_dlclose=${ac_cv_func_dlclose=no}
+ac_cv_func_dlopen=${ac_cv_func_dlopen=no}
+ac_cv_func_dlsym=${ac_cv_func_dlsym=no}
+ac_cv_func_dup2=${ac_cv_func_dup2=yes}
+ac_cv_func_getcwd=${ac_cv_func_getcwd=yes}
+ac_cv_func_getdtablesize=${ac_cv_func_getdtablesize=no}
+ac_cv_func_getgroups=${ac_cv_func_getgroups=yes}
+ac_cv_func_gethostname=${ac_cv_func_gethostname=yes}
+ac_cv_func_getpagesize=${ac_cv_func_getpagesize=yes}
+ac_cv_func_getpeername=${ac_cv_func_getpeername=yes}
+ac_cv_func_getpgrp_void=${ac_cv_func_getpgrp_void=yes}
+ac_cv_func_getrlimit=${ac_cv_func_getrlimit=no}
+ac_cv_func_getrusage=${ac_cv_func_getrusage=no}
+ac_cv_func_gettext=${ac_cv_func_gettext=no}
+ac_cv_func_gettimeofday=${ac_cv_func_gettimeofday=yes}
+ac_cv_func_killpg=${ac_cv_func_killpg=yes}
+ac_cv_func_lstat=${ac_cv_func_lstat=no}
+ac_cv_func_memmove=${ac_cv_func_memmove=yes}
+ac_cv_func_mkfifo=${ac_cv_func_mkfifo=yes}
+ac_cv_func_putenv=${ac_cv_func_putenv=yes}
+ac_cv_func_rename=${ac_cv_func_rename=yes}
+ac_cv_func_sbrk=${ac_cv_func_sbrk=no}
+ac_cv_func_select=${ac_cv_func_select=yes}
+ac_cv_func_setdtablesize=${ac_cv_func_setdtablesize=no}
+ac_cv_func_setenv=${ac_cv_func_setenv=yes}
+ac_cv_func_setlinebuf=${ac_cv_func_setlinebuf=yes}
+ac_cv_func_setlocale=${ac_cv_func_setlocale=yes}
+ac_cv_func_setvbuf_reversed=${ac_cv_func_setvbuf_reversed=no}
+ac_cv_func_siginterrupt=${ac_cv_func_siginterrupt=no}
+ac_cv_func_strcasecmp=${ac_cv_func_strcasecmp=yes}
+ac_cv_func_strchr=${ac_cv_func_strchr=yes}
+ac_cv_func_strcoll_works=${ac_cv_func_strcoll_works=yes}
+ac_cv_func_strerror=${ac_cv_func_strerror=yes}
+ac_cv_func_strtod=${ac_cv_func_strtod=yes}
+ac_cv_func_strtol=${ac_cv_func_strtol=yes}
+ac_cv_func_strtoul=${ac_cv_func_strtoul=yes}
+ac_cv_func_sysconf=${ac_cv_func_sysconf=yes}
+ac_cv_func_tcgetattr=${ac_cv_func_tcgetattr=yes}
+ac_cv_func_tcgetpgrp=${ac_cv_func_tcgetpgrp=yes}
+ac_cv_func_textdomain=${ac_cv_func_textdomain=no}
+ac_cv_func_times=${ac_cv_func_times=yes}
+ac_cv_func_tzset=${ac_cv_func_tzset=yes}
+ac_cv_func_ulimit=${ac_cv_func_ulimit=no}
+ac_cv_func_uname=${ac_cv_func_uname=yes}
+ac_cv_func_vprintf=${ac_cv_func_vprintf=yes}
+ac_cv_func_wait3=${ac_cv_func_wait3=no}
+ac_cv_func_wait3_rusage=${ac_cv_func_wait3_rusage=no}
+ac_cv_func_waitpid=${ac_cv_func_waitpid=yes}
+ac_cv_header_alloca_h=${ac_cv_header_alloca_h=no}
+ac_cv_header_dirent_dirent_h=${ac_cv_header_dirent_dirent_h=yes}
+ac_cv_header_dlfcn_h=${ac_cv_header_dlfcn_h=no}
+ac_cv_header_libintl_h=${ac_cv_header_libintl_h=no}
+ac_cv_header_limits_h=${ac_cv_header_limits_h=yes}
+ac_cv_header_locale_h=${ac_cv_header_locale_h=yes}
+ac_cv_header_memory_h=${ac_cv_header_memory_h=yes}
+ac_cv_header_minix_config_h=${ac_cv_header_minix_config_h=no}
+ac_cv_header_stat_broken=${ac_cv_header_stat_broken=no}
+ac_cv_header_stdarg_h=${ac_cv_header_stdarg_h=yes}
+ac_cv_header_stdc=${ac_cv_header_stdc=yes}
+ac_cv_header_stdlib_h=${ac_cv_header_stdlib_h=yes}
+ac_cv_header_string_h=${ac_cv_header_string_h=yes}
+ac_cv_header_sys_file_h=${ac_cv_header_sys_file_h=yes}
+ac_cv_header_sys_param_h=${ac_cv_header_sys_param_h=yes}
+ac_cv_header_sys_pte_h=${ac_cv_header_sys_pte_h=no}
+ac_cv_header_sys_ptem_h=${ac_cv_header_sys_ptem_h=no}
+ac_cv_header_sys_resource_h=${ac_cv_header_sys_resource_h=no}
+ac_cv_header_sys_select_h=${ac_cv_header_sys_select_h=no}
+ac_cv_header_sys_socket_h=${ac_cv_header_sys_socket_h=yes}
+ac_cv_header_sys_stream_h=${ac_cv_header_sys_stream_h=no}
+ac_cv_header_sys_time_h=${ac_cv_header_sys_time_h=yes}
+ac_cv_header_sys_times_h=${ac_cv_header_sys_times_h=yes}
+ac_cv_header_sys_wait_h=${ac_cv_header_sys_wait_h=yes}
+ac_cv_header_termcap_h=${ac_cv_header_termcap_h=no}
+ac_cv_header_termio_h=${ac_cv_header_termio_h=no}
+ac_cv_header_termios_h=${ac_cv_header_termios_h=yes}
+ac_cv_header_time=${ac_cv_header_time=yes}
+ac_cv_header_unistd_h=${ac_cv_header_unistd_h=yes}
+ac_cv_header_varargs_h=${ac_cv_header_varargs_h=no}
+ac_cv_lib_dir_opendir=${ac_cv_lib_dir_opendir=no}
+ac_cv_lib_dl_dlopen=${ac_cv_lib_dl_dlopen=no}
+ac_cv_lib_intl_bindtextdomain=${ac_cv_lib_intl_bindtextdomain=no}
+ac_cv_lib_termcap_tgetent=${ac_cv_lib_termcap_tgetent=yes}
+ac_cv_path_install=${ac_cv_path_install='$INTERIX_ROOT/bin/install -c'}
+ac_cv_prog_AR=${ac_cv_prog_AR=ar}
+ac_cv_prog_CC=${ac_cv_prog_CC=gcc}
+ac_cv_prog_CPP=${ac_cv_prog_CPP='cc -E'}
+ac_cv_prog_RANLIB=${ac_cv_prog_RANLIB=:}
+ac_cv_prog_cc_cross=${ac_cv_prog_cc_cross=no}
+ac_cv_prog_cc_g=${ac_cv_prog_cc_g=yes}
+ac_cv_prog_cc_works=${ac_cv_prog_cc_works=yes}
+ac_cv_prog_gcc=${ac_cv_prog_gcc=yes}
+ac_cv_prog_gcc_traditional=${ac_cv_prog_gcc_traditional=no}
+ac_cv_prog_make_make_set=${ac_cv_prog_make_make_set=yes}
+ac_cv_sizeof_char_p=${ac_cv_sizeof_char_p=4}
+ac_cv_sizeof_double=${ac_cv_sizeof_double=8}
+ac_cv_sizeof_int=${ac_cv_sizeof_int=4}
+ac_cv_sizeof_long=${ac_cv_sizeof_long=4}
+ac_cv_sys_interpreter=${ac_cv_sys_interpreter=yes}
+ac_cv_sys_restartable_syscalls=${ac_cv_sys_restartable_syscalls=no}
+ac_cv_type_getgroups=${ac_cv_type_getgroups=gid_t}
+ac_cv_type_mode_t=${ac_cv_type_mode_t=yes}
+ac_cv_type_off_t=${ac_cv_type_off_t=yes}
+ac_cv_type_pid_t=${ac_cv_type_pid_t=yes}
+ac_cv_type_signal=${ac_cv_type_signal=void}
+ac_cv_type_size_t=${ac_cv_type_size_t=yes}
+ac_cv_type_time_t=${ac_cv_type_time_t=yes}
+ac_cv_type_uid_t=${ac_cv_type_uid_t=yes}
+bash_cv_can_redecl_getpw=${bash_cv_can_redecl_getpw=yes}
+bash_cv_decl_under_sys_siglist=${bash_cv_decl_under_sys_siglist=no}
+bash_cv_dev_fd=${bash_cv_dev_fd=absent}
+bash_cv_dirent_has_d_fileno=${bash_cv_dirent_has_d_fileno=no}
+bash_cv_dirent_has_dino=${bash_cv_dirent_has_dino=yes}
+bash_cv_dup2_broken=${bash_cv_dup2_broken=no}
+bash_cv_fionread_in_ioctl=${bash_cv_fionread_in_ioctl=yes}
+bash_cv_func_lstat=${bash_cv_func_lstat=no}
+bash_cv_func_sigsetjmp=${bash_cv_func_sigsetjmp=present}
+bash_cv_func_strcoll_broken=${bash_cv_func_strcoll_broken=no}
+bash_cv_getcwd_calls_popen=${bash_cv_getcwd_calls_popen=no}
+bash_cv_getenv_redef=${bash_cv_getenv_redef=yes}
+bash_cv_have_strsignal=${bash_cv_have_strsignal=yes}
+bash_cv_job_control_missing=${bash_cv_job_control_missing=present}
+bash_cv_mail_dir=${bash_cv_mail_dir=/usr/spool/mail}
+bash_cv_must_reinstall_sighandlers=${bash_cv_must_reinstall_sighandlers=no}
+bash_cv_opendir_not_robust=${bash_cv_opendir_not_robust=no}
+bash_cv_pgrp_pipe=${bash_cv_pgrp_pipe=no}
+bash_cv_printf_declared=${bash_cv_printf_declared=yes}
+bash_cv_sbrk_declared=${bash_cv_sbrk_declared=no}
+bash_cv_signal_vintage=${bash_cv_signal_vintage=posix}
+bash_cv_speed_t_in_sys_types=${bash_cv_speed_t_in_sys_types=no}
+bash_cv_struct_timeval=${bash_cv_struct_timeval=yes}
+bash_cv_struct_winsize_header=${bash_cv_struct_winsize_header=ioctl_h}
+bash_cv_struct_winsize_in_ioctl=${bash_cv_struct_winsize_in_ioctl=yes}
+bash_cv_sys_errlist=${bash_cv_sys_errlist=yes}
+bash_cv_sys_named_pipes=${bash_cv_sys_named_pipes=present}
+bash_cv_sys_siglist=${bash_cv_sys_siglist=yes}
+bash_cv_termcap_lib=${bash_cv_termcap_lib=libtermcap}
+bash_cv_termio_ldisc=${bash_cv_termio_ldisc=no}
+bash_cv_termios_ldisc=${bash_cv_termios_ldisc=no}
+bash_cv_tiocgwinsz_in_ioctl=${bash_cv_tiocgwinsz_in_ioctl=yes}
+bash_cv_tiocstat_in_ioctl=${bash_cv_tiocstat_in_ioctl=no}
+bash_cv_type_clock_t=${bash_cv_type_clock_t=yes}
+bash_cv_type_quad_t=${bash_cv_type_quad_t=yes}
+bash_cv_type_rlimit=${bash_cv_type_rlimit=long}
+bash_cv_type_sigset_t=${bash_cv_type_sigset_t=yes}
+bash_cv_ulimit_maxfds=${bash_cv_ulimit_maxfds=no}
+bash_cv_under_sys_siglist=${bash_cv_under_sys_siglist=no}
+bash_cv_void_sighandler=${bash_cv_void_sighandler=yes}
diff --git a/cross-build/qnx.cache b/cross-build/qnx.cache
new file mode 100644
index 0000000..3f630fd
--- /dev/null
+++ b/cross-build/qnx.cache
@@ -0,0 +1,66 @@
+bash_cv_decl_strtoimax=${bash_cv_decl_strtoimax=yes}
+bash_cv_decl_strtol=${bash_cv_decl_strtol=yes}
+bash_cv_decl_strtoll=${bash_cv_decl_strtoll=yes}
+bash_cv_decl_strtoul=${bash_cv_decl_strtoul=yes}
+bash_cv_decl_strtoull=${bash_cv_decl_strtoull=yes}
+bash_cv_decl_strtoumax=${bash_cv_decl_strtoumax=yes}
+bash_cv_decl_under_sys_siglist=${bash_cv_decl_under_sys_siglist=no}
+bash_cv_dev_fd=${bash_cv_dev_fd=absent}
+bash_cv_dev_stdin=${bash_cv_dev_stdin=present}
+bash_cv_dirent_has_d_fileno=${bash_cv_dirent_has_d_fileno=no}
+bash_cv_dirent_has_d_namlen=${bash_cv_dirent_has_d_namlen=no}
+bash_cv_dirent_has_dino=${bash_cv_dirent_has_dino=yes}
+bash_cv_dup2_broken=${bash_cv_dup2_broken=no}
+bash_cv_fionread_in_ioctl=${bash_cv_fionread_in_ioctl=yes}
+bash_cv_func_ctype_nonascii=${bash_cv_func_ctype_nonascii=no}
+bash_cv_func_sigsetjmp=${bash_cv_func_sigsetjmp=present}
+bash_cv_func_snprintf=${bash_cv_func_snprintf=yes}
+bash_cv_func_strcoll_broken=${bash_cv_func_strcoll_broken=no}
+bash_cv_func_vsnprintf=${bash_cv_func_vsnprintf=yes}
+bash_cv_getcwd_malloc=${bash_cv_getcwd_malloc=yes}
+bash_cv_getenv_redef=${bash_cv_getenv_redef=yes}
+bash_cv_getpw_declared=${bash_cv_getpw_declared=yes}
+bash_cv_have_gethostbyname=${bash_cv_have_gethostbyname=no}
+bash_cv_have_socklib=${bash_cv_have_socklib=no}
+bash_cv_have_strsignal=${bash_cv_have_strsignal=yes}
+bash_cv_job_control_missing=${bash_cv_job_control_missing=present}
+bash_cv_langinfo_codeset=${bash_cv_langinfo_codeset=no}
+bash_cv_mail_dir=${bash_cv_mail_dir=unknown}
+bash_cv_must_reinstall_sighandlers=${bash_cv_must_reinstall_sighandlers=no}
+bash_cv_opendir_not_robust=${bash_cv_opendir_not_robust=no}
+bash_cv_pgrp_pipe=${bash_cv_pgrp_pipe=no}
+bash_cv_printf_a_format=${bash_cv_printf_a_format=yes}
+bash_cv_signal_vintage=${bash_cv_signal_vintage=posix}
+bash_cv_speed_t_in_sys_types=${bash_cv_speed_t_in_sys_types=no}
+bash_cv_std_putenv=${bash_cv_std_putenv=yes}
+bash_cv_std_unsetenv=${bash_cv_std_unsetenv=yes}
+bash_cv_strtold_broken=${bash_cv_strtold_broken=no}
+bash_cv_struct_timeval=${bash_cv_struct_timeval=yes}
+bash_cv_struct_timezone=${bash_cv_struct_timezone=yes}
+bash_cv_struct_winsize_header=${bash_cv_struct_winsize_header=ioctl_h}
+bash_cv_sys_errlist=${bash_cv_sys_errlist=no}
+bash_cv_sys_named_pipes=${bash_cv_sys_named_pipes=present}
+bash_cv_sys_siglist=${bash_cv_sys_siglist=yes}
+bash_cv_sys_struct_timespec_in_time_h=${bash_cv_sys_struct_timespec_in_time_h=yes}
+bash_cv_termcap_lib=${bash_cv_termcap_lib=libtermcap}
+bash_cv_tiocstat_in_ioctl=${bash_cv_tiocstat_in_ioctl=no}
+bash_cv_type_clock_t=${bash_cv_type_clock_t=yes}
+bash_cv_type_intmax_t=${bash_cv_type_intmax_t=yes}
+bash_cv_type_long_long=${bash_cv_type_long_long='long long'}
+bash_cv_type_quad_t=${bash_cv_type_quad_t=no}
+bash_cv_type_rlimit=${bash_cv_type_rlimit=rlim_t}
+bash_cv_type_sig_atomic_t=${bash_cv_type_sig_atomic_t=yes}
+bash_cv_type_sigset_t=${bash_cv_type_sigset_t=yes}
+bash_cv_type_socklen_t=${bash_cv_type_socklen_t=yes}
+bash_cv_type_uintmax_t=${bash_cv_type_uintmax_t=yes}
+bash_cv_type_unsigned_long_long=${bash_cv_type_unsigned_long_long='unsigned long long'}
+bash_cv_type_wchar_t=${bash_cv_type_wchar_t=yes}
+bash_cv_type_wctype_t=${bash_cv_type_wctype_t=yes}
+bash_cv_type_wint_t=${bash_cv_type_wint_t=yes}
+bash_cv_ulimit_maxfds=${bash_cv_ulimit_maxfds=no}
+bash_cv_under_sys_siglist=${bash_cv_under_sys_siglist=no}
+bash_cv_unusable_rtsigs=${bash_cv_unusable_rtsigs=no}
+bash_cv_void_sighandler=${bash_cv_void_sighandler=yes}
+bash_cv_wcontinued_broken=${bash_cv_wcontinued_broken=no}
+bash_cv_wcwidth_broken=${bash_cv_wcwidth_broken=no}
+bash_cv_wexitstatus_offset=${bash_cv_wexitstatus_offset=8}
diff --git a/cross-build/x86-beos.cache b/cross-build/x86-beos.cache
new file mode 100644
index 0000000..351aa21
--- /dev/null
+++ b/cross-build/x86-beos.cache
@@ -0,0 +1,45 @@
+# This file is a shell script that caches the results of configure
+# tests for x86 BeOS so they don't need to be done when cross-compiling.
+
+# AC_FUNC_GETPGRP should also define GETPGRP_VOID
+ac_cv_func_getpgrp_void=${ac_cv_func_getpgrp_void='yes'}
+# AC_FUNC_SETVBUF_REVERSED should not define anything else
+ac_cv_func_setvbuf_reversed=${ac_cv_func_setvbuf_reversed='no'}
+# on BeOS, system calls do not restart
+ac_cv_sys_restartable_syscalls=${ac_cv_sys_restartable_syscalls='no'}
+bash_cv_sys_restartable_syscalls=${bash_cv_sys_restartable_syscalls='no'}
+
+ac_cv_func_tcgetattr=${ac_cv_func_tcgetattr='yes'}
+
+# x86 BeOS is little endian
+ac_cv_c_bigendian=${ac_cv_c_bigendian='no'}
+ac_cv_sizeof_char_p=${ac_cv_sizeof_char_p='4'}
+ac_cv_sizeof_int=${ac_cv_sizeof_int='4'}
+ac_cv_sizeof_long=${ac_cv_sizeof_long='4'}
+ac_cv_sizeof_double=${ac_cv_sizeof_double='8'}
+
+bash_cv_dev_fd=${bash_cv_dev_fd='absent'}
+bash_cv_dup2_broken=${bash_cv_dup2_broken='no'}
+bash_cv_pgrp_pipe=${bash_cv_pgrp_pipe='no'}
+bash_cv_type_rlimit=${bash_cv_type_rlimit='long'}
+bash_cv_decl_under_sys_siglist=${bash_cv_decl_under_sys_siglist='no'}
+bash_cv_under_sys_siglist=${bash_cv_under_sys_siglist='no'}
+bash_cv_sys_siglist=${bash_cv_sys_siglist='yes'}
+bash_cv_opendir_not_robust=${bash_cv_opendir_not_robust='no'}
+bash_cv_getenv_redef=${bash_cv_getenv_redef='yes'}
+bash_cv_printf_declared=${bash_cv_printf_declared='yes'}
+bash_cv_ulimit_maxfds=${bash_cv_ulimit_maxfds='no'}
+bash_cv_getcwd_calls_popen=${bash_cv_getcwd_calls_popen='no'}
+bash_cv_must_reinstall_sighandlers=${bash_cv_must_reinstall_sighandlers='no'}
+bash_cv_job_control_missing=${bash_cv_job_control_missing='present'}
+bash_cv_sys_named_pipes=${bash_cv_sys_named_pipes='present'}
+bash_cv_func_sigsetjmp=${bash_cv_func_sigsetjmp='missing'}
+bash_cv_mail_dir=${bash_cv_mail_dir='unknown'}
+bash_cv_func_strcoll_broken=${bash_cv_func_strcoll_broken='no'}
+
+bash_cv_type_int32_t=${bash_cv_type_int32_t='int'}
+bash_cv_type_u_int32_t=${bash_cv_type_u_int32_t='int'}
+
+ac_cv_type_bits64_t=${ac_cv_type_bits64_t='no'}
+
+# end of cross-build/x86-beos.cache
diff --git a/dispose_cmd.c b/dispose_cmd.c
new file mode 100644
index 0000000..c624605
--- /dev/null
+++ b/dispose_cmd.c
@@ -0,0 +1,342 @@
+/* dispose_command.c -- dispose of a COMMAND structure. */
+
+/* Copyright (C) 1987-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include "bashtypes.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "bashansi.h"
+#include "shell.h"
+
+extern sh_obj_cache_t wdcache, wlcache;
+
+/* Dispose of the command structure passed. */
+void
+dispose_command (command)
+     COMMAND *command;
+{
+  if (command == 0)
+    return;
+
+  if (command->redirects)
+    dispose_redirects (command->redirects);
+
+  switch (command->type)
+    {
+    case cm_for:
+#if defined (SELECT_COMMAND)
+    case cm_select:
+#endif
+      {
+	register FOR_COM *c;
+#if defined (SELECT_COMMAND)
+	if (command->type == cm_select)
+	  c = (FOR_COM *)command->value.Select;
+	else
+#endif
+	c = command->value.For;
+	dispose_word (c->name);
+	dispose_words (c->map_list);
+	dispose_command (c->action);
+	free (c);
+	break;
+      }
+
+#if defined (ARITH_FOR_COMMAND)
+    case cm_arith_for:
+      {
+	register ARITH_FOR_COM *c;
+
+	c = command->value.ArithFor;
+	dispose_words (c->init);
+	dispose_words (c->test);
+	dispose_words (c->step);
+	dispose_command (c->action);
+	free (c);
+	break;
+      }
+#endif /* ARITH_FOR_COMMAND */
+
+    case cm_group:
+      {
+	dispose_command (command->value.Group->command);
+	free (command->value.Group);
+	break;
+      }
+
+    case cm_subshell:
+      {
+	dispose_command (command->value.Subshell->command);
+	free (command->value.Subshell);
+	break;
+      }
+
+    case cm_coproc:
+      {
+	free (command->value.Coproc->name);
+	dispose_command (command->value.Coproc->command);
+	free (command->value.Coproc);
+	break;
+      }
+
+    case cm_case:
+      {
+	register CASE_COM *c;
+	PATTERN_LIST *t, *p;
+
+	c = command->value.Case;
+	dispose_word (c->word);
+
+	for (p = c->clauses; p; )
+	  {
+	    dispose_words (p->patterns);
+	    dispose_command (p->action);
+	    t = p;
+	    p = p->next;
+	    free (t);
+	  }
+	free (c);
+	break;
+      }
+
+    case cm_until:
+    case cm_while:
+      {
+	register WHILE_COM *c;
+
+	c = command->value.While;
+	dispose_command (c->test);
+	dispose_command (c->action);
+	free (c);
+	break;
+      }
+
+    case cm_if:
+      {
+	register IF_COM *c;
+
+	c = command->value.If;
+	dispose_command (c->test);
+	dispose_command (c->true_case);
+	dispose_command (c->false_case);
+	free (c);
+	break;
+      }
+
+    case cm_simple:
+      {
+	register SIMPLE_COM *c;
+
+	c = command->value.Simple;
+	dispose_words (c->words);
+	dispose_redirects (c->redirects);
+	free (c);
+	break;
+      }
+
+    case cm_connection:
+      {
+	register CONNECTION *c;
+
+	c = command->value.Connection;
+	dispose_command (c->first);
+	dispose_command (c->second);
+	free (c);
+	break;
+      }
+
+#if defined (DPAREN_ARITHMETIC)
+    case cm_arith:
+      {
+	register ARITH_COM *c;
+
+	c = command->value.Arith;
+	dispose_words (c->exp);
+	free (c);
+	break;
+      }
+#endif /* DPAREN_ARITHMETIC */
+
+#if defined (COND_COMMAND)
+    case cm_cond:
+      {
+	register COND_COM *c;
+
+	c = command->value.Cond;
+	dispose_cond_node (c);
+	break;
+      }
+#endif /* COND_COMMAND */
+
+    case cm_function_def:
+      {
+	register FUNCTION_DEF *c;
+
+	c = command->value.Function_def;
+	dispose_function_def (c);
+	break;
+      }
+
+    default:
+      command_error ("dispose_command", CMDERR_BADTYPE, command->type, 0);
+      break;
+    }
+  free (command);
+}
+
+#if defined (COND_COMMAND)
+/* How to free a node in a conditional command. */
+void
+dispose_cond_node (cond)
+     COND_COM *cond;
+{
+  if (cond)
+    {
+      if (cond->left)
+	dispose_cond_node (cond->left);
+      if (cond->right)
+	dispose_cond_node (cond->right);
+      if (cond->op)
+	dispose_word (cond->op);
+      free (cond);
+    }
+}
+#endif /* COND_COMMAND */
+
+void
+dispose_function_def_contents (c)
+     FUNCTION_DEF *c;
+{
+  dispose_word (c->name);
+  dispose_command (c->command);
+  FREE (c->source_file);
+}
+
+void
+dispose_function_def (c)
+     FUNCTION_DEF *c;
+{
+  dispose_function_def_contents (c);
+  free (c);
+}
+
+/* How to free a WORD_DESC. */
+void
+dispose_word (w)
+     WORD_DESC *w;
+{
+  FREE (w->word);
+  ocache_free (wdcache, WORD_DESC, w);
+}
+
+/* Free a WORD_DESC, but not the word contained within. */
+void
+dispose_word_desc (w)
+     WORD_DESC *w;
+{
+  w->word = 0;
+  ocache_free (wdcache, WORD_DESC, w);
+}
+
+/* How to get rid of a linked list of words.  A WORD_LIST. */
+void
+dispose_words (list)
+     WORD_LIST *list;
+{
+  WORD_LIST *t;
+
+  while (list)
+    {
+      t = list;
+      list = list->next;
+      dispose_word (t->word);
+#if 0
+      free (t);
+#else
+      ocache_free (wlcache, WORD_LIST, t);
+#endif
+    }
+}
+
+#ifdef INCLUDE_UNUSED
+/* How to dispose of an array of pointers to char.  This is identical to
+   free_array in stringlib.c. */
+void
+dispose_word_array (array)
+     char **array;
+{
+  register int count;
+
+  if (array == 0)
+    return;
+
+  for (count = 0; array[count]; count++)
+    free (array[count]);
+
+  free (array);
+}
+#endif
+
+/* How to dispose of an list of redirections.  A REDIRECT. */
+void
+dispose_redirects (list)
+     REDIRECT *list;
+{
+  register REDIRECT *t;
+
+  while (list)
+    {
+      t = list;
+      list = list->next;
+
+      if (t->rflags & REDIR_VARASSIGN)
+	dispose_word (t->redirector.filename);
+
+      switch (t->instruction)
+	{
+	case r_reading_until:
+	case r_deblank_reading_until:
+	  free (t->here_doc_eof);
+	/*FALLTHROUGH*/
+	case r_reading_string:
+	case r_output_direction:
+	case r_input_direction:
+	case r_inputa_direction:
+	case r_appending_to:
+	case r_err_and_out:
+	case r_append_err_and_out:
+	case r_input_output:
+	case r_output_force:
+	case r_duplicating_input_word:
+	case r_duplicating_output_word:
+	case r_move_input_word:
+	case r_move_output_word:
+	  dispose_word (t->redirectee.filename);
+	  /* FALLTHROUGH */
+	default:
+	  break;
+	}
+      free (t);
+    }
+}
diff --git a/dispose_cmd.h b/dispose_cmd.h
new file mode 100644
index 0000000..6095d44
--- /dev/null
+++ b/dispose_cmd.h
@@ -0,0 +1,40 @@
+/* dispose_cmd.h -- Functions appearing in dispose_cmd.c. */
+
+/* Copyright (C) 1993-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_DISPOSE_CMD_H_)
+#define _DISPOSE_CMD_H_
+
+#include "stdc.h"
+
+extern void dispose_command PARAMS((COMMAND *));
+extern void dispose_word_desc PARAMS((WORD_DESC *));
+extern void dispose_word PARAMS((WORD_DESC *));
+extern void dispose_words PARAMS((WORD_LIST *));
+extern void dispose_word_array PARAMS((char **));
+extern void dispose_redirects PARAMS((REDIRECT *));
+
+#if defined (COND_COMMAND)
+extern void dispose_cond_node PARAMS((COND_COM *));
+#endif
+
+extern void dispose_function_def_contents PARAMS((FUNCTION_DEF *));
+extern void dispose_function_def PARAMS((FUNCTION_DEF *));
+
+#endif /* !_DISPOSE_CMD_H_ */
diff --git a/doc/INTRO b/doc/INTRO
new file mode 100644
index 0000000..29f208a
--- /dev/null
+++ b/doc/INTRO
@@ -0,0 +1,187 @@
+		       BASH - The Bourne-Again Shell
+
+Bash is the shell, or command language interpreter, that will appear
+in the GNU operating system.  Bash is an sh-compatible shell that
+incorporates useful features from the Korn shell (ksh) and C shell
+(csh).  It is intended to conform to the IEEE POSIX P1003.2/ISO 9945.2
+Shell and Tools standard.  It offers functional improvements over sh
+for both programming and interactive use.  In addition, most sh scripts
+can be run by Bash without modification. 
+
+Bash is quite portable.  It uses a configuration system that discovers
+characteristics of the compilation platform at build time, and may
+therefore be built on nearly every version of UNIX.  Ports to
+UNIX-like systems such as QNX and Minix and to non-UNIX systems such
+as OS/2, Windows 95, and Windows NT are available. 
+
+Bash includes the following features:
+
+Editing and Completion
+
+Bash offers a command-line editing facility which permits users to
+edit command lines using familiar emacs or vi-style editing commands.
+Editing allows corrections to be made without having to erase back
+to the point of error or start the command line anew.  The editing
+facilities include a feature that allows users to complete command and
+file names.
+
+The Bash line editing library is fully customizable.  Users may define
+their own key bindings -- the action taken when a key is pressed.  A
+number of variables to fine-tune editing behavior are also available.
+
+History and Command Re-entry
+
+The Bash history feature remembers commands entered to the shell and
+allows them to be recalled and re-executed.  The history list may be
+of unlimited size.  Bash allows users to search for previous commands
+and reuse portions of those commands when composing new ones.  The
+history list may be saved across shell sessions. 
+
+Bash allows users to control which commands are saved on the history
+list.
+
+Job Control
+
+On systems that support it, Bash provides an interface to the
+operating system's job control facilities, which allow processes
+to be suspended and restarted, and moved between the foreground
+and background.  Bash allows users to selectively `forget' about
+background jobs. 
+
+Shell Functions and Aliases
+
+These mechanisms are available to bind a user-selected identifier to a
+list of commands that will be executed when the identifier is used as
+a command name.  Functions allow local variables and recursion, and
+have access to the environment of the calling shell.  Aliases may be
+used to create a mnemonic for a command name, expand a single word to
+a complex command, or ensure that a command is called with a basic set
+of options. 
+
+Arrays
+
+Bash-2.0 supports indexed arrays of unlimited size.  The subscript for
+an array is an arithmetic expression.  Arrays may be assigned to with
+a new compound assignment syntax, and several builtins have options to
+operate on array variables.  Bash includes a number of built-in array
+variables.
+
+Arithmetic
+
+Bash allows users to perform integer arithmetic in any base from two
+to sixty-four.  Nearly all of the C language arithmetic operators are
+available with the same syntax and precedence as in C.  Arithmetic
+expansion allows an arithmetic expression to be evaluated and the
+result substituted into the command line.  Shell variables can be used
+as operands, and the value of an expression may be assigned to a
+variable. 
+
+An arithmetic expression may be used as a command; the exit status of
+the command is the value of the expression.
+
+ANSI-C Quoting
+
+There is a new quoting syntax that allows backslash-escaped characters
+in strings to be expanded according to the ANSI C standard.
+
+Tilde Expansion
+
+Users' home directories may be expanded using this feature.  Words
+beginning with a tilde may also be expanded to the current or previous
+working directory.
+
+Brace Expansion
+
+Brace expansion is a convenient way to generate a list of strings that
+share a common prefix or suffix.
+
+Substring Capabilities
+
+Bash allows new strings to be created by removing leading or trailing
+substrings from existing variable values, or by specifying a starting
+offset and length.  Portions of variable values may be matched against
+shell patterns and the matching portion removed or a new value
+substituted. 
+
+Indirect Variable Expansion
+
+Bash makes it easy to find the value of a shell variable whose name is
+the value of another variable.
+
+Expanded I/O Capabilities
+
+Bash provides several input and output features not available in sh,
+including the ability to:
+
+	o specify a file or file descriptor for both input and output
+	o read from or write to asynchronous processes using named pipes
+	o read lines ending in backslash
+	o display a prompt on the terminal before a read
+	o format menus and interpret responses to them
+	o echo lines exactly as input without escape processing
+
+Control of Builtin Commands
+
+Bash implements several builtin commands to give users more control
+over which commands are executed.  The enable builtin allows other
+builtin commands to be selectively enabled or disabled.  The command
+and builtin builtins change the order in which the shell searches for
+commands. 
+
+On systems that provide dynamic loading, new builtins may be loaded
+into a running shell from a shared object file.  These new builtins
+have access to all of the shell facilities.
+
+Help
+
+Bash includes a built-in help facility.
+
+Shell Optional Behavior
+
+There is a great deal of customizable shell behavior.  The shopt
+builtin command provides a unified interface that allows users to
+alter shell defaults. 
+
+Prompt Customization
+
+Bash allows the primary and secondary prompts to be customized by
+interpreting a number of backslash-escaped special characters. 
+Parameter and variable expansion is also performed on the values of
+the primary and secondary prompt strings before they are displayed. 
+
+Security
+
+Bash provides a restricted shell environment.  It is also possible to
+control the execution of setuid/setgid scripts. 
+
+Directory Stack
+
+Bash provides a `directory stack', to which directories may be added
+and removed.  The current directory may be changed to any directory in
+the stack.  It is easy to toggle between two directories in the stack. 
+The directory stack may be saved and restored across different shell
+invocations. 
+
+POSIX Mode
+
+Bash is nearly completely conformant to POSIX.2.  POSIX mode changes
+those few areas where the Bash default behavior differs from the
+standard to match the standard.  In POSIX mode, Bash is POSIX.2
+compliant. 
+
+Internationalization
+
+Bash provides a new quoting syntax that allows strings to be
+translated according to the current locale.  The locale in which the
+shell itself runs may also be changed, so that the shell messages
+themselves may be language-specific. 
+
+The command-line editing facilities allow the input of eight-bit
+characters, so most of the ISO-8859 family of character sets are
+supported. 
+
+Command Timing
+
+Bash allows external commands, shell builtin commands and shell functions
+to be timed.  The format used to display the timing information may be
+changed by the user.
diff --git a/doc/Makefile.in b/doc/Makefile.in
new file mode 100644
index 0000000..12068fb
--- /dev/null
+++ b/doc/Makefile.in
@@ -0,0 +1,341 @@
+# This Makefile is for the Bash/documentation directory -*- text -*-.
+#
+# Copyright (C) 2003-2015 Free Software Foundation, Inc.
+
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+PACKAGE = @PACKAGE_NAME@
+VERSION = @PACKAGE_VERSION@
+
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+
+#
+SHELL = @MAKE_SHELL@
+RM	    = rm -f
+
+topdir = @top_srcdir@
+srcdir = @srcdir@
+VPATH = @srcdir@
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+datarootdir = @datarootdir@
+
+infodir = @infodir@
+
+docdir = @docdir@
+
+# set this to a directory name to have the HTML files installed
+htmldir = @htmldir@
+
+# Support an alternate destination root directory for package building
+DESTDIR =
+
+mandir = @mandir@
+manpfx = man
+
+man1ext = .1
+man1dir = $(mandir)/$(manpfx)1
+man3ext = .3
+man3dir = $(mandir)/$(manpfx)3
+
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+BUILD_DIR = @BUILD_DIR@
+
+SUPPORT_SRCDIR = $(topdir)/support
+
+# bad style
+RL_LIBDIR = $(topdir)/lib/readline
+
+# unused
+TEXINDEX    = texindex
+TEX	    = tex
+
+MAKEINFO    = makeinfo
+TEXI2DVI    = ${SUPPORT_SRCDIR}/texi2dvi
+TEXI2HTML   = ${SUPPORT_SRCDIR}/texi2html
+MAN2HTML    = ${BUILD_DIR}/support/man2html
+HTMLPOST    = ${srcdir}/htmlpost.sh
+INFOPOST    = ${srcdir}/infopost.sh
+QUIETPS	    = #set this to -q to shut up dvips
+PAPERSIZE   = letter	# change to a4 for A4-size paper
+PSDPI       = 600	# could be 300 if you like
+DVIPS	    = dvips -D ${PSDPI} $(QUIETPS) -t ${PAPERSIZE} -o $@	# tricky
+# experimental; uses external texi2dvi for now; this needs pdftex to be present
+TEXI2PDF    = texi2dvi --pdf
+
+TEXINPUTDIR = $(RL_LIBDIR)/doc
+SET_TEXINPUTS = TEXINPUTS=.:$(TEXINPUTDIR):$$TEXINPUTS
+
+# These tools might not be available; they're not required
+DVIPDF	    = dvipdfm -o $@ -p ${PAPERSIZE}
+PSPDF       = gs -sPAPERSIZE=${PAPERSIZE} -sDEVICE=pdfwrite -dNOPAUSE -dBATCH -sOutputFile=$@
+
+MKDIRS      = ${SUPPORT_SRCDIR}/mkdirs
+
+# This should be a program that converts troff to an ascii-readable format
+# added the -P -c for benefit of Mac OS X, which insists on adding colors if
+# it's not present
+NROFF	    = groff -Tascii -P -c
+
+# This should be a program that converts troff to postscript
+GROFF	    = groff
+
+HSUSER      = $(RL_LIBDIR)/doc/hsuser.texi
+RLUSER      = $(RL_LIBDIR)/doc/rluser.texi
+
+BASHREF_FILES = $(srcdir)/bashref.texi $(srcdir)/fdl.texi $(srcdir)/version.texi
+
+.SUFFIXES:	.0 .1 .3 .ms .ps .txt .dvi .html .pdf
+
+.1.ps:
+	$(RM) $@
+	-${GROFF} -man $< > $@
+
+.1.0:
+	$(RM) $@
+	-${NROFF} -man $< > $@
+
+.1.html:
+	$(RM) $@
+	-${MAN2HTML} $< | ${HTMLPOST} > $@
+
+.ms.ps:
+	$(RM) $@
+	-${GROFF} -ms $< > $@
+
+.ms.txt:
+	$(RM) $@
+	-${NROFF} -ms $< > $@
+
+.3.ps:
+	$(RM) $@
+	-${GROFF} -man $< > $@
+
+.3.0:
+	$(RM) $@
+	-${NROFF} -man $< > $@
+
+.3.html:
+	$(RM) $@
+	-${MAN2HTML} $< > $@
+
+.ps.pdf:
+	$(RM) $@
+	-${PSPDF} $<
+
+.dvi.pdf:
+	$(RM) $@
+	-${DVIPDF} $<
+
+.dvi.ps:
+	${RM} $@
+	-${DVIPS} $<
+
+#.texi.pdf:
+#	$(RM) $@
+#	-${TEXI2PDF} $<
+
+all: ps info dvi text html $(MAN2HTML)
+nodvi: ps info text html
+everything: all pdf
+
+PSFILES = bash.ps bashbug.ps article.ps builtins.ps rbash.ps 
+DVIFILES = bashref.dvi bashref.ps
+INFOFILES = bashref.info bash.info
+MAN0FILES = bash.0 bashbug.0 builtins.0 rbash.0
+HTMLFILES = bashref.html bash.html
+PDFFILES = bash.pdf bashref.pdf article.pdf rose94.pdf
+
+ps: ${PSFILES}
+dvi: ${DVIFILES}
+info: ${INFOFILES}
+text: ${MAN0FILES}
+html: ${HTMLFILES}
+pdf: ${PDFFILES}
+
+bashref.dvi: $(BASHREF_FILES) $(HSUSER) $(RLUSER)
+	${SET_TEXINPUTS} $(TEXI2DVI) $(srcdir)/bashref.texi || { ${RM} $@ ; exit 1; }
+
+bashref.info: $(BASHREF_FILES) $(HSUSER) $(RLUSER)
+	$(MAKEINFO) --no-split -I$(TEXINPUTDIR) $(srcdir)/bashref.texi
+
+# experimental
+bashref.pdf: $(BASHREF_FILES) $(HSUSER) $(RLUSER)
+	${SET_TEXINPUTS} $(TEXI2PDF) $(srcdir)/bashref.texi || { ${RM} $@ ; exit 1; }
+
+
+# can also use:
+#	$(TEXI2HTML) -menu -monolithic -I $(TEXINPUTDIR) $(srcdir)/bashref.texi
+bashref.html: $(BASHREF_FILES) $(HSUSER) $(RLUSER)
+	$(MAKEINFO) --html --no-split -I$(TEXINPUTDIR) $(srcdir)/bashref.texi
+
+bash.info: bashref.info
+	${SHELL} ${INFOPOST} < $(srcdir)/bashref.info > $@ ; \
+
+bash.txt: bash.1
+bash.ps: bash.1
+bash.html: bash.1
+bashbug.ps: bashbug.1
+builtins.ps: builtins.1 bash.1
+rbash.ps: rbash.1 bash.1
+bash.0: bash.1
+bashbug.0: bashbug.1
+builtins.0: builtins.1 bash.1
+rbash.0: rbash.1 bash.1
+article.ps: article.ms
+
+bashref.ps: bashref.dvi
+
+article.pdf: article.ps
+#bashref.pdf: bashref.dvi
+# experimental
+bashref.pdf: bashref.texi
+bash.pdf: bash.ps
+rose94.pdf: rose94.ps
+
+OTHER_DOCS = $(srcdir)/FAQ $(srcdir)/INTRO
+OTHER_INSTALLED_DOCS = FAQ INTRO
+
+$(MAN2HTML):	${topdir}/support/man2html.c
+	-( cd ${BUILD_DIR}/support ; ${MAKE} ${MFLAGS} man2html)
+
+clean:
+	$(RM) *.aux *.bak *.cp *.fn *.ky *.log *.pg *.toc *.tp *.vr *.cps \
+		*.pgs *.bt *.bts *.rw *.rws *.fns *.kys *.tps *.vrs *.o
+	${RM} core *.core
+
+mostlyclean: clean
+	$(RM) Makefile
+
+distclean: clean maybe-clean
+	$(RM) Makefile
+
+maintainer-clean:	clean
+	${RM} ${PSFILES} ${DVIFILES} ${INFOFILES} ${MAN0FILES} ${HTMLFILES}
+	${RM} ${CREATED_FAQ}
+	$(RM) Makefile
+
+maybe-clean:
+	-if test "X$(topdir)" != "X$(BUILD_DIR)"; then \
+		$(RM) ${PSFILES} ${DVIFILES} ${INFOFILES} ${MAN0FILES} ${HTMLFILES}; \
+	fi
+
+installdirs:
+	-$(SHELL) $(SUPPORT_SRCDIR)/mkinstalldirs $(DESTDIR)$(man1dir)
+	-$(SHELL) $(SUPPORT_SRCDIR)/mkinstalldirs $(DESTDIR)$(infodir)
+	-$(SHELL) $(SUPPORT_SRCDIR)/mkinstalldirs $(DESTDIR)$(docdir)
+	-if test -n "$(htmldir)" ; then \
+		$(SHELL) $(SUPPORT_SRCDIR)/mkinstalldirs $(DESTDIR)$(htmldir) ; \
+	fi
+	
+install: info installdirs
+	-$(INSTALL_DATA) $(srcdir)/bash.1 $(DESTDIR)$(man1dir)/bash${man1ext}
+	-$(INSTALL_DATA) $(srcdir)/bashbug.1 $(DESTDIR)$(man1dir)/bashbug${man1ext}
+	-$(INSTALL_DATA) $(OTHER_DOCS) $(DESTDIR)$(docdir)
+# uncomment the next lines to install the builtins man page
+#	sed 's:bash\.1:man1/&:' $(srcdir)/builtins.1 > $${TMPDIR:-/var/tmp}/builtins.1
+#	-$(INSTALL_DATA) $${TMPDIR:-/var/tmp}/builtins.1 $(DESTDIR)$(man1dir)/bash_builtins${man1ext}
+#	-$(RM) $${TMPDIR:-/var/tmp}/builtins.1
+	-if test -f bash.info; then d=.; else d=$(srcdir); fi; \
+	  $(INSTALL_DATA) $$d/bash.info $(DESTDIR)$(infodir)/bash.info
+# run install-info if it is present to update the info directory
+	if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \
+		install-info --dir-file=$(DESTDIR)$(infodir)/dir $(DESTDIR)$(infodir)/bash.info; \
+	else true; fi
+# if htmldir is set, install the html files into that directory
+	-if test -n "${htmldir}" ; then \
+		$(INSTALL_DATA) $(srcdir)/bash.html $(DESTDIR)$(htmldir) ; \
+		$(INSTALL_DATA) $(srcdir)/bashref.html $(DESTDIR)$(htmldir) ; \
+	fi
+
+install_builtins:	installdirs
+	sed 's:bash\.1:man1/&:' $(srcdir)/builtins.1 > $${TMPDIR:-/var/tmp}/builtins.1
+	-$(INSTALL_DATA) $${TMPDIR:-/var/tmp}/builtins.1 $(DESTDIR)$(man1dir)/bash_builtins${man1ext}
+	-$(RM) $${TMPDIR:-/var/tmp}/builtins.1
+
+install_everything:	install install_builtins
+
+install-html:	html
+	-if test -n "${htmldir}" ; then \
+		$(INSTALL_DATA) $(srcdir)/bash.html $(DESTDIR)$(htmldir) ; \
+		$(INSTALL_DATA) $(srcdir)/bashref.html $(DESTDIR)$(htmldir) ; \
+	fi
+
+uninstall:
+	-$(RM) $(DESTDIR)$(man1dir)/bash${man1ext} $(DESTDIR)$(man1dir)/bashbug${man1ext}
+	-$(RM) $(DESTDIR)$(man1dir)/bash_builtins${man1ext}
+	$(RM) $(DESTDIR)$(infodir)/bash.info
+# run install-info if it is present to update the info directory
+	if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \
+		install-info --delete --dir-file=$(DESTDIR)$(infodir)/dir $(DESTDIR)$(infodir)/bash.info; \
+	else true; fi
+	-( cd $(DESTDIR)$(docdir) && $(RM) $(OTHER_INSTALLED_DOCS) )
+	-if test -n "$(htmldir)" ; then \
+		$(RM) $(DESTDIR)$(htmldir)/bash.html ; \
+		$(RM) $(DESTDIR)$(htmldir)/bashref.html ; \
+	fi
+
+# for use by chet
+CREATED_FAQ = faq.news faq.news2 faq.mail faq.version
+
+faq:	${CREATED_FAQ}
+
+faq.version:	FAQ.version FAQ
+	sh mkfaqvers FAQ.version > $@
+
+faq.headers.mail: FAQ.headers.mail FAQ
+	sh mkfaqvers FAQ.headers.mail > $@
+
+faq.headers.news: FAQ.headers.news FAQ
+	sh mkfaqvers FAQ.headers.news > $@
+
+faq.headers.news2: FAQ.headers.news2 FAQ
+	sh mkfaqvers FAQ.headers.news2 > $@
+
+faq.news: FAQ faq.headers.news faq.version
+	$(RM) $@
+	cat faq.headers.news faq.version FAQ > $@
+
+faq.news2: FAQ faq.headers.news2 faq.version
+	$(RM) $@
+	cat faq.headers.news2 faq.version FAQ > $@
+
+faq.mail: FAQ faq.headers.mail faq.version
+	$(RM) $@
+	cat faq.headers.mail faq.version FAQ > $@
+
+inst:	bashref.texi
+	$(SHELL) ./mkinstall
+	cmp -s INSTALL ../INSTALL || mv INSTALL ../INSTALL
+	$(RM) INSTALL
+
+posix:	bashref.texi
+	$(SHELL) ./mkposix
+	cmp -s POSIX ../POSIX || mv POSIX ../POSIX
+	$(RM) POSIX
+
+rbash:	bashref.texi
+	$(SHELL) ./mkrbash
+	cmp -s RBASH ../RBASH || mv RBASH ../RBASH
+	$(RM) RBASH
+
+xdist: everything inst posix rbash
diff --git a/doc/README b/doc/README
new file mode 100644
index 0000000..e3a1d24
--- /dev/null
+++ b/doc/README
@@ -0,0 +1,36 @@
+This directory contains the bash documentation.
+
+FAQ		- a set of frequently-asked questions about Bash with answers
+INTRO		- a short introduction to bash
+article.ms	- an article I wrote about bash for The Linux Journal
+bash.1		- the bash man page
+builtins.1	- a man page that documents the builtins, extracted from bash.1
+bashref.texi	- the `bash reference manual'
+bashref.info	- the `bash reference manual' processed by `makeinfo'
+readline.3	- the readline man page
+
+The `.ps' files are postscript versions of the above.  The `.html'
+files are HTML versions of the man page and reference manual.  The
+`.0' files are formatted manual pages.  The `.txt' versions are
+ascii -- the output of `groff -Tascii'.
+
+The rest of this file explains how to use the `builtins.1' man page.
+
+For each command in the list of builtins create a file in man/man1 called:
+
+${command}.1
+
+eg.
+for.1
+type.1
+alias.1
+etc.
+
+All these files are identical as follows:
+
+jaws@jaws(264)$ cat alias.1
+.so man1/builtins.1
+jaws@jaws(265)$ 
+
+Make sure you adjust the .so line in builtins.1 to reflect where you
+put it.
diff --git a/doc/aosa-bash-full.pdf b/doc/aosa-bash-full.pdf
new file mode 100644
index 0000000..0181549
--- /dev/null
+++ b/doc/aosa-bash-full.pdf
diff --git a/doc/bash.0 b/doc/bash.0
new file mode 100644
index 0000000..9160b09
--- /dev/null
+++ b/doc/bash.0
@@ -0,0 +1,6405 @@
+BASH(1)                     General Commands Manual                    BASH(1)
+
+
+
+NNAAMMEE
+       bash - GNU Bourne-Again SHell
+
+SSYYNNOOPPSSIISS
+       bbaasshh [options] [command_string | file]
+
+CCOOPPYYRRIIGGHHTT
+       Bash is Copyright (C) 1989-2020 by the Free Software Foundation, Inc.
+
+DDEESSCCRRIIPPTTIIOONN
+       BBaasshh  is  an  sshh-compatible  command language interpreter that executes
+       commands read from the standard input or from a file.  BBaasshh also incor-
+       porates useful features from the _K_o_r_n and _C shells (kksshh and ccsshh).
+
+       BBaasshh  is  intended  to  be a conformant implementation of the Shell and
+       Utilities portion  of  the  IEEE  POSIX  specification  (IEEE  Standard
+       1003.1).  BBaasshh can be configured to be POSIX-conformant by default.
+
+OOPPTTIIOONNSS
+       All of the single-character shell options documented in the description
+       of the sseett builtin command, including --oo, can be used as  options  when
+       the  shell  is invoked.  In addition, bbaasshh interprets the following op-
+       tions when it is invoked:
+
+       --cc        If the --cc option is present, then commands are read from  the
+                 first non-option argument _c_o_m_m_a_n_d___s_t_r_i_n_g.  If there are argu-
+                 ments after the _c_o_m_m_a_n_d___s_t_r_i_n_g, the  first  argument  is  as-
+                 signed  to $$00 and any remaining arguments are assigned to the
+                 positional parameters.  The assignment to $$00 sets the name of
+                 the shell, which is used in warning and error messages.
+       --ii        If the --ii option is present, the shell is _i_n_t_e_r_a_c_t_i_v_e.
+       --ll        Make bbaasshh act as if it had been invoked as a login shell (see
+                 IINNVVOOCCAATTIIOONN below).
+       --rr        If the --rr option is present,  the  shell  becomes  _r_e_s_t_r_i_c_t_e_d
+                 (see RREESSTTRRIICCTTEEDD SSHHEELLLL below).
+       --ss        If  the --ss option is present, or if no arguments remain after
+                 option processing, then commands are read from  the  standard
+                 input.   This  option  allows the positional parameters to be
+                 set when invoking an interactive shell or when reading  input
+                 through a pipe.
+       --DD        A  list of all double-quoted strings preceded by $$ is printed
+                 on the standard output.  These are the strings that are  sub-
+                 ject to language translation when the current locale is not CC
+                 or PPOOSSIIXX.  This implies the --nn option; no  commands  will  be
+                 executed.
+       [[--++]]OO [[_s_h_o_p_t___o_p_t_i_o_n]]
+                 _s_h_o_p_t___o_p_t_i_o_n  is  one  of  the  shell options accepted by the
+                 sshhoopptt  builtin  (see  SSHHEELLLL  BBUUIILLTTIINN  CCOOMMMMAANNDDSS  below).    If
+                 _s_h_o_p_t___o_p_t_i_o_n is present, --OO sets the value of that option; ++OO
+                 unsets it.  If _s_h_o_p_t___o_p_t_i_o_n is not supplied,  the  names  and
+                 values  of the shell options accepted by sshhoopptt are printed on
+                 the standard output.  If the invocation  option  is  ++OO,  the
+                 output is displayed in a format that may be reused as input.
+       ----        A  ----  signals the end of options and disables further option
+                 processing.  Any arguments after the ---- are treated as  file-
+                 names and arguments.  An argument of -- is equivalent to ----.
+
+       BBaasshh  also  interprets  a number of multi-character options.  These op-
+       tions must appear on the command line before the  single-character  op-
+       tions to be recognized.
+
+       ----ddeebbuuggggeerr
+              Arrange for the debugger profile to be executed before the shell
+              starts.  Turns on extended debugging mode (see  the  description
+              of the eexxttddeebbuugg option to the sshhoopptt builtin below).
+       ----dduummpp--ppoo--ssttrriinnggss
+              Equivalent  to --DD, but the output is in the GNU _g_e_t_t_e_x_t ppoo (por-
+              table object) file format.
+       ----dduummpp--ssttrriinnggss
+              Equivalent to --DD.
+       ----hheellpp Display a usage message on standard  output  and  exit  success-
+              fully.
+       ----iinniitt--ffiillee _f_i_l_e
+       ----rrccffiillee _f_i_l_e
+              Execute commands from _f_i_l_e instead of the standard personal ini-
+              tialization file _~_/_._b_a_s_h_r_c if the shell is interactive (see  IINN--
+              VVOOCCAATTIIOONN below).
+
+       ----llooggiinn
+              Equivalent to --ll.
+
+       ----nnooeeddiittiinngg
+              Do  not  use the GNU rreeaaddlliinnee library to read command lines when
+              the shell is interactive.
+
+       ----nnoopprrooffiillee
+              Do not read either the system-wide startup file _/_e_t_c_/_p_r_o_f_i_l_e  or
+              any   of  the  personal  initialization  files  _~_/_._b_a_s_h___p_r_o_f_i_l_e,
+              _~_/_._b_a_s_h___l_o_g_i_n, or _~_/_._p_r_o_f_i_l_e.   By  default,  bbaasshh  reads  these
+              files  when  it  is invoked as a login shell (see IINNVVOOCCAATTIIOONN be-
+              low).
+
+       ----nnoorrcc Do  not  read  and  execute  the  personal  initialization  file
+              _~_/_._b_a_s_h_r_c if the shell is interactive.  This option is on by de-
+              fault if the shell is invoked as sshh.
+
+       ----ppoossiixx
+              Change the behavior of bbaasshh where the default operation  differs
+              from the POSIX standard to match the standard (_p_o_s_i_x _m_o_d_e).  See
+              SSEEEE AALLSSOO below for a reference to a document  that  details  how
+              posix mode affects bash's behavior.
+
+       ----rreessttrriicctteedd
+              The shell becomes restricted (see RREESSTTRRIICCTTEEDD SSHHEELLLL below).
+
+       ----vveerrbboossee
+              Equivalent to --vv.
+
+       ----vveerrssiioonn
+              Show  version information for this instance of bbaasshh on the stan-
+              dard output and exit successfully.
+
+AARRGGUUMMEENNTTSS
+       If arguments remain after option processing, and neither the --cc nor the
+       --ss  option  has  been supplied, the first argument is assumed to be the
+       name of a file containing shell commands.  If bbaasshh is invoked  in  this
+       fashion,  $$00 is set to the name of the file, and the positional parame-
+       ters are set to the remaining arguments.  BBaasshh reads and executes  com-
+       mands  from this file, then exits.  BBaasshh's exit status is the exit sta-
+       tus of the last command executed in the script.  If no commands are ex-
+       ecuted,  the  exit  status  is 0.  An attempt is first made to open the
+       file in the current directory, and, if no file is found, then the shell
+       searches the directories in PPAATTHH for the script.
+
+IINNVVOOCCAATTIIOONN
+       A  _l_o_g_i_n _s_h_e_l_l is one whose first character of argument zero is a --, or
+       one started with the ----llooggiinn option.
+
+       An _i_n_t_e_r_a_c_t_i_v_e shell is one started without non-option  arguments  (un-
+       less  --ss  is  specified) and without the --cc option whose standard input
+       and error are both connected to terminals (as determined by _i_s_a_t_t_y(3)),
+       or  one  started  with  the --ii option.  PPSS11 is set and $$-- includes ii if
+       bbaasshh is interactive, allowing a shell script or a startup file to  test
+       this state.
+
+       The  following paragraphs describe how bbaasshh executes its startup files.
+       If any of the files exist but cannot be read, bbaasshh  reports  an  error.
+       Tildes  are expanded in filenames as described below under TTiillddee EExxppaann--
+       ssiioonn in the EEXXPPAANNSSIIOONN section.
+
+       When bbaasshh is invoked as an interactive login shell, or as a  non-inter-
+       active  shell with the ----llooggiinn option, it first reads and executes com-
+       mands from the file _/_e_t_c_/_p_r_o_f_i_l_e, if that file exists.   After  reading
+       that file, it looks for _~_/_._b_a_s_h___p_r_o_f_i_l_e, _~_/_._b_a_s_h___l_o_g_i_n, and _~_/_._p_r_o_f_i_l_e,
+       in that order, and reads and executes commands from the first one  that
+       exists  and  is  readable.  The ----nnoopprrooffiillee option may be used when the
+       shell is started to inhibit this behavior.
+
+       When an interactive login shell exits, or a non-interactive login shell
+       executes  the  eexxiitt  builtin  command, bbaasshh reads and executes commands
+       from the file _~_/_._b_a_s_h___l_o_g_o_u_t, if it exists.
+
+       When an interactive shell that is not a login shell  is  started,  bbaasshh
+       reads  and executes commands from _~_/_._b_a_s_h_r_c, if that file exists.  This
+       may be inhibited by using the ----nnoorrcc option.  The ----rrccffiillee _f_i_l_e  option
+       will  force  bbaasshh  to  read  and  execute commands from _f_i_l_e instead of
+       _~_/_._b_a_s_h_r_c.
+
+       When bbaasshh is started non-interactively, to run a shell script, for  ex-
+       ample,  it  looks for the variable BBAASSHH__EENNVV in the environment, expands
+       its value if it appears there, and uses the expanded value as the  name
+       of  a  file to read and execute.  BBaasshh behaves as if the following com-
+       mand were executed:
+              if [ -n "$BASH_ENV" ]; then . "$BASH_ENV"; fi
+       but the value of the PPAATTHH variable is not used to search for the  file-
+       name.
+
+       If  bbaasshh is invoked with the name sshh, it tries to mimic the startup be-
+       havior of historical versions of sshh as closely as possible, while  con-
+       forming  to the POSIX standard as well.  When invoked as an interactive
+       login shell, or a non-interactive shell with  the  ----llooggiinn  option,  it
+       first  attempts  to  read  and  execute  commands from _/_e_t_c_/_p_r_o_f_i_l_e and
+       _~_/_._p_r_o_f_i_l_e, in that order.  The ----nnoopprrooffiillee option may be used  to  in-
+       hibit  this  behavior.   When  invoked as an interactive shell with the
+       name sshh, bbaasshh looks for the variable EENNVV, expands its value  if  it  is
+       defined,  and uses the expanded value as the name of a file to read and
+       execute.  Since a shell invoked as sshh does not attempt to read and exe-
+       cute  commands from any other startup files, the ----rrccffiillee option has no
+       effect.  A non-interactive shell invoked with the name sshh does not  at-
+       tempt to read any other startup files.  When invoked as sshh, bbaasshh enters
+       _p_o_s_i_x mode after the startup files are read.
+
+       When bbaasshh is started in _p_o_s_i_x mode, as with the  ----ppoossiixx  command  line
+       option, it follows the POSIX standard for startup files.  In this mode,
+       interactive shells expand the EENNVV variable and commands  are  read  and
+       executed  from  the  file  whose  name is the expanded value.  No other
+       startup files are read.
+
+       BBaasshh attempts to determine when it is being run with its standard input
+       connected to a network connection, as when executed by the remote shell
+       daemon, usually _r_s_h_d, or the secure shell daemon _s_s_h_d.  If bbaasshh  deter-
+       mines  it  is being run in this fashion, it reads and executes commands
+       from _~_/_._b_a_s_h_r_c, if that file exists and is readable.  It  will  not  do
+       this  if  invoked as sshh.  The ----nnoorrcc option may be used to inhibit this
+       behavior, and the ----rrccffiillee option may be used to force another file  to
+       be  read,  but  neither  _r_s_h_d  nor _s_s_h_d generally invoke the shell with
+       those options or allow them to be specified.
+
+       If the shell is started with the effective user (group) id not equal to
+       the real user (group) id, and the --pp option is not supplied, no startup
+       files are read, shell functions are not inherited from the environment,
+       the  SSHHEELLLLOOPPTTSS, BBAASSHHOOPPTTSS, CCDDPPAATTHH, and GGLLOOBBIIGGNNOORREE variables, if they ap-
+       pear in the environment, are ignored, and the effective user id is  set
+       to  the  real user id.  If the --pp option is supplied at invocation, the
+       startup behavior is the same, but the effective user id is not reset.
+
+DDEEFFIINNIITTIIOONNSS
+       The following definitions are used throughout the rest  of  this  docu-
+       ment.
+       bbllaannkk  A space or tab.
+       wwoorrdd   A  sequence  of  characters  considered  as a single unit by the
+              shell.  Also known as a ttookkeenn.
+       nnaammee   A _w_o_r_d consisting only of  alphanumeric  characters  and  under-
+              scores,  and beginning with an alphabetic character or an under-
+              score.  Also referred to as an iiddeennttiiffiieerr.
+       mmeettaacchhaarraacctteerr
+              A character that, when unquoted, separates words.   One  of  the
+              following:
+              ||  && ;; (( )) << >> ssppaaccee ttaabb nneewwlliinnee
+       ccoonnttrrooll ooppeerraattoorr
+              A _t_o_k_e_n that performs a control function.  It is one of the fol-
+              lowing symbols:
+              |||| && &&&& ;; ;;;; ;;&& ;;;;&& (( )) || ||&& <<nneewwlliinnee>>
+
+RREESSEERRVVEEDD WWOORRDDSS
+       _R_e_s_e_r_v_e_d _w_o_r_d_s are words that have a special meaning to the shell.  The
+       following words are recognized as reserved when unquoted and either the
+       first word of a command (see SSHHEELLLL GGRRAAMMMMAARR below), the third word of  a
+       ccaassee  or  sseelleecctt command (only iinn is valid), or the third word of a ffoorr
+       command (only iinn and ddoo are valid):
+
+       !! ccaassee  ccoopprroocc  ddoo ddoonnee eelliiff eellssee eessaacc ffii ffoorr  ffuunnccttiioonn  iiff  iinn  sseelleecctt
+       tthheenn uunnttiill wwhhiillee {{ }} ttiimmee [[[[ ]]]]
+
+SSHHEELLLL GGRRAAMMMMAARR
+   SSiimmppllee CCoommmmaannddss
+       A  _s_i_m_p_l_e  _c_o_m_m_a_n_d  is a sequence of optional variable assignments fol-
+       lowed by bbllaannkk-separated words and redirections, and  terminated  by  a
+       _c_o_n_t_r_o_l _o_p_e_r_a_t_o_r.  The first word specifies the command to be executed,
+       and is passed as argument zero.  The remaining words are passed as  ar-
+       guments to the invoked command.
+
+       The  return  value  of a _s_i_m_p_l_e _c_o_m_m_a_n_d is its exit status, or 128+_n if
+       the command is terminated by signal _n.
+
+   PPiippeelliinneess
+       A _p_i_p_e_l_i_n_e is a sequence of one or more commands separated  by  one  of
+       the control operators || or ||&&.  The format for a pipeline is:
+
+              [ttiimmee [--pp]] [ ! ] _c_o_m_m_a_n_d [ [|||||&&] _c_o_m_m_a_n_d_2 ... ]
+
+       The  standard output of _c_o_m_m_a_n_d is connected via a pipe to the standard
+       input of _c_o_m_m_a_n_d_2.  This connection is performed  before  any  redirec-
+       tions specified by the command (see RREEDDIIRREECCTTIIOONN below).  If ||&& is used,
+       _c_o_m_m_a_n_d's standard error, in addition to its standard output,  is  con-
+       nected  to  _c_o_m_m_a_n_d_2's standard input through the pipe; it is shorthand
+       for 22>>&&11 ||.  This implicit redirection of the  standard  error  to  the
+       standard  output  is  performed after any redirections specified by the
+       command.
+
+       The return status of a pipeline is the exit status of the last command,
+       unless  the  ppiippeeffaaiill  option  is enabled.  If ppiippeeffaaiill is enabled, the
+       pipeline's return status is the value of the last  (rightmost)  command
+       to  exit  with a non-zero status, or zero if all commands exit success-
+       fully.  If the reserved word !!  precedes a pipeline, the exit status of
+       that  pipeline  is the logical negation of the exit status as described
+       above.  The shell waits for all commands in the pipeline  to  terminate
+       before returning a value.
+
+       If  the  ttiimmee reserved word precedes a pipeline, the elapsed as well as
+       user and system time consumed by its execution are  reported  when  the
+       pipeline  terminates.   The --pp option changes the output format to that
+       specified by POSIX.  When the shell is in _p_o_s_i_x _m_o_d_e, it does not  rec-
+       ognize  ttiimmee  as  a  reserved word if the next token begins with a `-'.
+       The TTIIMMEEFFOORRMMAATT variable may be set to a format  string  that  specifies
+       how  the timing information should be displayed; see the description of
+       TTIIMMEEFFOORRMMAATT under SShheellll VVaarriiaabblleess below.
+
+       When the shell is in _p_o_s_i_x _m_o_d_e, ttiimmee may be followed by a newline.  In
+       this  case,  the shell displays the total user and system time consumed
+       by the shell and its children.  The TTIIMMEEFFOORRMMAATT variable may be used  to
+       specify the format of the time information.
+
+       Each  command in a pipeline is executed as a separate process (i.e., in
+       a subshell).  See CCOOMMMMAANNDD EEXXEECCUUTTIIOONN EENNVVIIRROONNMMEENNTT for a description of  a
+       subshell  environment.   If  the  llaassttppiippee  option is enabled using the
+       sshhoopptt builtin (see the description of sshhoopptt below), the last element of
+       a pipeline may be run by the shell process.
+
+   LLiissttss
+       A  _l_i_s_t  is a sequence of one or more pipelines separated by one of the
+       operators ;;, &&, &&&&, or ||||, and optionally terminated by one of ;;, &&, or
+       <<nneewwlliinnee>>.
+
+       Of these list operators, &&&& and |||| have equal precedence, followed by ;;
+       and &&, which have equal precedence.
+
+       A sequence of one or more newlines may appear in a _l_i_s_t  instead  of  a
+       semicolon to delimit commands.
+
+       If  a  command  is terminated by the control operator &&, the shell exe-
+       cutes the command in the _b_a_c_k_g_r_o_u_n_d in a subshell.  The shell does  not
+       wait  for the command to finish, and the return status is 0.  These are
+       referred to as _a_s_y_n_c_h_r_o_n_o_u_s commands.  Commands separated by  a  ;;  are
+       executed sequentially; the shell waits for each command to terminate in
+       turn.  The return status is the exit status of the  last  command  exe-
+       cuted.
+
+       AND  and  OR  lists are sequences of one or more pipelines separated by
+       the &&&& and |||| control operators, respectively.  AND and  OR  lists  are
+       executed with left associativity.  An AND list has the form
+
+              _c_o_m_m_a_n_d_1 &&&& _c_o_m_m_a_n_d_2
+
+       _c_o_m_m_a_n_d_2  is  executed if, and only if, _c_o_m_m_a_n_d_1 returns an exit status
+       of zero (success).
+
+       An OR list has the form
+
+              _c_o_m_m_a_n_d_1 |||| _c_o_m_m_a_n_d_2
+
+       _c_o_m_m_a_n_d_2 is executed if, and only if, _c_o_m_m_a_n_d_1 returns a non-zero  exit
+       status.   The  return  status of AND and OR lists is the exit status of
+       the last command executed in the list.
+
+   CCoommppoouunndd CCoommmmaannddss
+       A _c_o_m_p_o_u_n_d _c_o_m_m_a_n_d is one of the following.  In most cases a _l_i_s_t in  a
+       command's  description may be separated from the rest of the command by
+       one or more newlines, and may be followed by a newline in  place  of  a
+       semicolon.
+
+       (_l_i_s_t) _l_i_s_t  is  executed in a subshell environment (see CCOOMMMMAANNDD EEXXEECCUU--
+              TTIIOONN EENNVVIIRROONNMMEENNTT below).  Variable assignments and builtin  com-
+              mands  that  affect the shell's environment do not remain in ef-
+              fect after the command completes.  The return status is the exit
+              status of _l_i_s_t.
+
+       { _l_i_s_t; }
+              _l_i_s_t  is simply executed in the current shell environment.  _l_i_s_t
+              must be terminated with a newline or semicolon.  This  is  known
+              as  a  _g_r_o_u_p  _c_o_m_m_a_n_d.   The return status is the exit status of
+              _l_i_s_t.  Note that unlike the metacharacters (( and )), {{ and }}  are
+              _r_e_s_e_r_v_e_d _w_o_r_d_s and must occur where a reserved word is permitted
+              to be recognized.  Since they do not cause a  word  break,  they
+              must  be  separated  from  _l_i_s_t  by  whitespace or another shell
+              metacharacter.
+
+       ((_e_x_p_r_e_s_s_i_o_n))
+              The _e_x_p_r_e_s_s_i_o_n is evaluated according to the rules described be-
+              low under AARRIITTHHMMEETTIICC EEVVAALLUUAATTIIOONN.  If the value of the expression
+              is non-zero, the return status is 0; otherwise the return status
+              is 1.  This is exactly equivalent to lleett ""_e_x_p_r_e_s_s_i_o_n"".
+
+       [[[[ _e_x_p_r_e_s_s_i_o_n ]]]]
+              Return  a  status  of  0 or 1 depending on the evaluation of the
+              conditional expression _e_x_p_r_e_s_s_i_o_n.  Expressions are composed  of
+              the  primaries  described  below  under CCOONNDDIITTIIOONNAALL EEXXPPRREESSSSIIOONNSS.
+              Word splitting and pathname expansion are not performed  on  the
+              words  between  the  [[[[  and  ]]]]; tilde expansion, parameter and
+              variable expansion, arithmetic expansion, command  substitution,
+              process  substitution,  and quote removal are performed.  Condi-
+              tional operators such as --ff must be unquoted to be recognized as
+              primaries.
+
+              When  used with [[[[, the << and >> operators sort lexicographically
+              using the current locale.
+
+              When the ==== and !!== operators are used, the string to  the  right
+              of the operator is considered a pattern and matched according to
+              the rules described below under PPaatttteerrnn MMaattcchhiinngg, as if the eexxtt--
+              gglloobb shell option were enabled.  The == operator is equivalent to
+              ====.  If the nnooccaasseemmaattcchh shell option is enabled,  the  match  is
+              performed  without  regard to the case of alphabetic characters.
+              The return value is 0 if the string matches  (====)  or  does  not
+              match  (!!==)  the pattern, and 1 otherwise.  Any part of the pat-
+              tern may be quoted to force the quoted portion to be matched  as
+              a string.
+
+              An  additional  binary operator, ==~~, is available, with the same
+              precedence as ==== and !!==.  When it is used,  the  string  to  the
+              right of the operator is considered a POSIX extended regular ex-
+              pression and matched accordingly (using the  POSIX  _r_e_g_c_o_m_p  and
+              _r_e_g_e_x_e_c  interfaces  usually described in _r_e_g_e_x(3)).  The return
+              value is 0 if the string matches the pattern, and  1  otherwise.
+              If the regular expression is syntactically incorrect, the condi-
+              tional expression's return value is 2.  If the nnooccaasseemmaattcchh shell
+              option  is enabled, the match is performed without regard to the
+              case of alphabetic characters.  Any part of the pattern  may  be
+              quoted  to  force  the quoted portion to be matched as a string.
+              Bracket expressions in regular expressions must be treated care-
+              fully,  since  normal quoting characters lose their meanings be-
+              tween brackets.  If the pattern is stored in a  shell  variable,
+              quoting  the  variable expansion forces the entire pattern to be
+              matched as a string.
+
+              The pattern will match if it matches any  part  of  the  string.
+              Anchor  the  pattern using the ^^ and $$ regular expression opera-
+              tors to force it to match the entire string.  The array variable
+              BBAASSHH__RREEMMAATTCCHH  records which parts of the string matched the pat-
+              tern.  The element of BBAASSHH__RREEMMAATTCCHH with  index  0  contains  the
+              portion  of  the  string matching the entire regular expression.
+              Substrings matched by parenthesized  subexpressions  within  the
+              regular  expression  are saved in the remaining BBAASSHH__RREEMMAATTCCHH in-
+              dices. The element of BBAASSHH__RREEMMAATTCCHH with index _n is  the  portion
+              of the string matching the _nth parenthesized subexpression.
+
+              Expressions  may  be  combined  using  the  following operators,
+              listed in decreasing order of precedence:
+
+              (( _e_x_p_r_e_s_s_i_o_n ))
+                     Returns the value of _e_x_p_r_e_s_s_i_o_n.  This  may  be  used  to
+                     override the normal precedence of operators.
+              !! _e_x_p_r_e_s_s_i_o_n
+                     True if _e_x_p_r_e_s_s_i_o_n is false.
+              _e_x_p_r_e_s_s_i_o_n_1 &&&& _e_x_p_r_e_s_s_i_o_n_2
+                     True if both _e_x_p_r_e_s_s_i_o_n_1 and _e_x_p_r_e_s_s_i_o_n_2 are true.
+              _e_x_p_r_e_s_s_i_o_n_1 |||| _e_x_p_r_e_s_s_i_o_n_2
+                     True if either _e_x_p_r_e_s_s_i_o_n_1 or _e_x_p_r_e_s_s_i_o_n_2 is true.
+
+              The &&&& and |||| operators do not evaluate _e_x_p_r_e_s_s_i_o_n_2 if the value
+              of _e_x_p_r_e_s_s_i_o_n_1 is sufficient to determine the  return  value  of
+              the entire conditional expression.
+
+       ffoorr _n_a_m_e [ [ iinn [ _w_o_r_d _._._. ] ] ; ] ddoo _l_i_s_t ; ddoonnee
+              The list of words following iinn is expanded, generating a list of
+              items.  The variable _n_a_m_e is set to each element of this list in
+              turn,  and  _l_i_s_t is executed each time.  If the iinn _w_o_r_d is omit-
+              ted, the ffoorr command executes _l_i_s_t once for each positional  pa-
+              rameter  that  is set (see PPAARRAAMMEETTEERRSS below).  The return status
+              is the exit status of the last command that  executes.   If  the
+              expansion of the items following iinn results in an empty list, no
+              commands are executed, and the return status is 0.
+
+       ffoorr (( _e_x_p_r_1 ; _e_x_p_r_2 ; _e_x_p_r_3 )) ; ddoo _l_i_s_t ; ddoonnee
+              First, the arithmetic expression _e_x_p_r_1 is evaluated according to
+              the  rules  described  below  under  AARRIITTHHMMEETTIICC EEVVAALLUUAATTIIOONN.  The
+              arithmetic expression _e_x_p_r_2 is then evaluated  repeatedly  until
+              it  evaluates  to zero.  Each time _e_x_p_r_2 evaluates to a non-zero
+              value, _l_i_s_t is executed and the arithmetic expression  _e_x_p_r_3  is
+              evaluated.   If  any  expression is omitted, it behaves as if it
+              evaluates to 1.  The return value is the exit status of the last
+              command in _l_i_s_t that is executed, or false if any of the expres-
+              sions is invalid.
+
+       sseelleecctt _n_a_m_e [ iinn _w_o_r_d ] ; ddoo _l_i_s_t ; ddoonnee
+              The list of words following iinn is expanded, generating a list of
+              items.  The set of expanded words is printed on the standard er-
+              ror, each preceded by a number.  If the iinn _w_o_r_d is omitted,  the
+              positional  parameters  are printed (see PPAARRAAMMEETTEERRSS below).  The
+              PPSS33 prompt is then displayed and a line read from  the  standard
+              input.  If the line consists of a number corresponding to one of
+              the displayed words, then the value of _n_a_m_e is set to that word.
+              If  the line is empty, the words and prompt are displayed again.
+              If EOF is read, the command completes.   Any  other  value  read
+              causes  _n_a_m_e  to  be set to null.  The line read is saved in the
+              variable RREEPPLLYY.  The _l_i_s_t is executed after each selection until
+              a  bbrreeaakk  command is executed.  The exit status of sseelleecctt is the
+              exit status of the last command executed in _l_i_s_t, or zero if  no
+              commands were executed.
+
+       ccaassee _w_o_r_d iinn [ [(] _p_a_t_t_e_r_n [ || _p_a_t_t_e_r_n ] ... ) _l_i_s_t ;; ] ... eessaacc
+              A ccaassee command first expands _w_o_r_d, and tries to match it against
+              each _p_a_t_t_e_r_n in turn, using the matching rules  described  under
+              PPaatttteerrnn MMaattcchhiinngg below.  The _w_o_r_d is expanded using tilde expan-
+              sion, parameter and variable  expansion,  arithmetic  expansion,
+              command  substitution,  process  substitution and quote removal.
+              Each _p_a_t_t_e_r_n examined is expanded using tilde expansion, parame-
+              ter  and  variable expansion, arithmetic expansion, command sub-
+              stitution, and process substitution.  If the  nnooccaasseemmaattcchh  shell
+              option  is enabled, the match is performed without regard to the
+              case of alphabetic characters.  When a match is found, the  cor-
+              responding  _l_i_s_t  is  executed.   If the ;;;; operator is used, no
+              subsequent matches are attempted after the first pattern  match.
+              Using  ;;&&  in  place of ;;;; causes execution to continue with the
+              _l_i_s_t associated with the next set of  patterns.   Using  ;;;;&&  in
+              place  of  ;;;;  causes the shell to test the next pattern list in
+              the statement, if any, and execute any associated _l_i_s_t on a suc-
+              cessful match, continuing the case statement execution as if the
+              pattern list had not matched.  The exit status  is  zero  if  no
+              pattern  matches.   Otherwise, it is the exit status of the last
+              command executed in _l_i_s_t.
+
+       iiff _l_i_s_t; tthheenn _l_i_s_t; [ eelliiff _l_i_s_t; tthheenn _l_i_s_t; ] ... [ eellssee _l_i_s_t; ] ffii
+              The iiff _l_i_s_t is executed.  If its exit status is zero,  the  tthheenn
+              _l_i_s_t  is  executed.   Otherwise,  each  eelliiff _l_i_s_t is executed in
+              turn, and if its exit status is  zero,  the  corresponding  tthheenn
+              _l_i_s_t is executed and the command completes.  Otherwise, the eellssee
+              _l_i_s_t is executed, if present.  The exit status is the exit  sta-
+              tus of the last command executed, or zero if no condition tested
+              true.
+
+       wwhhiillee _l_i_s_t_-_1; ddoo _l_i_s_t_-_2; ddoonnee
+       uunnttiill _l_i_s_t_-_1; ddoo _l_i_s_t_-_2; ddoonnee
+              The wwhhiillee command continuously executes the list _l_i_s_t_-_2 as  long
+              as the last command in the list _l_i_s_t_-_1 returns an exit status of
+              zero.  The uunnttiill command is identical to the wwhhiillee command,  ex-
+              cept that the test is negated: _l_i_s_t_-_2 is executed as long as the
+              last command in _l_i_s_t_-_1 returns a non-zero exit status.  The exit
+              status of the wwhhiillee and uunnttiill commands is the exit status of the
+              last command executed in _l_i_s_t_-_2, or zero if none was executed.
+
+   CCoopprroocceesssseess
+       A _c_o_p_r_o_c_e_s_s is a shell command preceded by the ccoopprroocc reserved word.  A
+       coprocess  is  executed asynchronously in a subshell, as if the command
+       had been terminated with the && control operator, with  a  two-way  pipe
+       established between the executing shell and the coprocess.
+
+       The format for a coprocess is:
+
+              ccoopprroocc [_N_A_M_E] _c_o_m_m_a_n_d [_r_e_d_i_r_e_c_t_i_o_n_s]
+
+       This  creates a coprocess named _N_A_M_E.  If _N_A_M_E is not supplied, the de-
+       fault name is CCOOPPRROOCC.  _N_A_M_E must not be supplied if _c_o_m_m_a_n_d is a _s_i_m_p_l_e
+       _c_o_m_m_a_n_d  (see above); otherwise, it is interpreted as the first word of
+       the simple command.  When the coprocess is executed, the shell  creates
+       an  array  variable (see AArrrraayyss below) named _N_A_M_E in the context of the
+       executing shell.  The standard output of _c_o_m_m_a_n_d  is  connected  via  a
+       pipe  to  a  file  descriptor in the executing shell, and that file de-
+       scriptor is assigned to _N_A_M_E[0].  The standard input of _c_o_m_m_a_n_d is con-
+       nected via a pipe to a file descriptor in the executing shell, and that
+       file descriptor is assigned to _N_A_M_E[1].  This pipe is  established  be-
+       fore any redirections specified by the command (see RREEDDIIRREECCTTIIOONN below).
+       The file descriptors can be utilized as arguments to shell commands and
+       redirections  using standard word expansions.  Other than those created
+       to execute command and process substitutions, the file descriptors  are
+       not available in subshells.  The process ID of the shell spawned to ex-
+       ecute the coprocess is available as the value of the variable _N_A_M_E_PID.
+       The  wwaaiitt builtin command may be used to wait for the coprocess to ter-
+       minate.
+
+       Since the coprocess is created as an asynchronous command,  the  ccoopprroocc
+       command  always  returns  success.  The return status of a coprocess is
+       the exit status of _c_o_m_m_a_n_d.
+
+   SShheellll FFuunnccttiioonn DDeeffiinniittiioonnss
+       A shell function is an object that is called like a simple command  and
+       executes  a  compound  command with a new set of positional parameters.
+       Shell functions are declared as follows:
+
+       _f_n_a_m_e () _c_o_m_p_o_u_n_d_-_c_o_m_m_a_n_d [_r_e_d_i_r_e_c_t_i_o_n]
+       ffuunnccttiioonn _f_n_a_m_e [()] _c_o_m_p_o_u_n_d_-_c_o_m_m_a_n_d [_r_e_d_i_r_e_c_t_i_o_n]
+              This defines a function named _f_n_a_m_e.  The reserved word ffuunnccttiioonn
+              is  optional.   If  the  ffuunnccttiioonn reserved word is supplied, the
+              parentheses are optional.  The _b_o_d_y of the function is the  com-
+              pound  command  _c_o_m_p_o_u_n_d_-_c_o_m_m_a_n_d  (see CCoommppoouunndd CCoommmmaannddss above).
+              That command is usually a _l_i_s_t of commands between { and },  but
+              may  be  any  command listed under CCoommppoouunndd CCoommmmaannddss above, with
+              one exception: If the ffuunnccttiioonn reserved word is  used,  but  the
+              parentheses  are  not  supplied,  the braces are required.  _c_o_m_-
+              _p_o_u_n_d_-_c_o_m_m_a_n_d is executed whenever _f_n_a_m_e  is  specified  as  the
+              name  of  a simple command.  When in _p_o_s_i_x _m_o_d_e, _f_n_a_m_e must be a
+              valid shell _n_a_m_e and may not be the name of  one  of  the  POSIX
+              _s_p_e_c_i_a_l  _b_u_i_l_t_i_n_s.   In default mode, a function name can be any
+              unquoted shell word that does not contain $$.   Any  redirections
+              (see RREEDDIIRREECCTTIIOONN below) specified when a function is defined are
+              performed when the function is executed.  The exit status  of  a
+              function  definition  is  zero unless a syntax error occurs or a
+              readonly function with the same name already exists.  When  exe-
+              cuted,  the  exit status of a function is the exit status of the
+              last command executed in the body.  (See FFUUNNCCTTIIOONNSS below.)
+
+CCOOMMMMEENNTTSS
+       In a non-interactive shell, or an interactive shell in which the iinntteerr--
+       aaccttiivvee__ccoommmmeennttss  option  to  the  sshhoopptt  builtin  is enabled (see SSHHEELLLL
+       BBUUIILLTTIINN CCOOMMMMAANNDDSS below), a word beginning with ## causes that  word  and
+       all  remaining  characters  on that line to be ignored.  An interactive
+       shell without the iinntteerraaccttiivvee__ccoommmmeennttss option enabled  does  not  allow
+       comments.  The iinntteerraaccttiivvee__ccoommmmeennttss option is on by default in interac-
+       tive shells.
+
+QQUUOOTTIINNGG
+       _Q_u_o_t_i_n_g is used to remove the special meaning of certain characters  or
+       words  to  the shell.  Quoting can be used to disable special treatment
+       for special characters, to prevent reserved words from being recognized
+       as such, and to prevent parameter expansion.
+
+       Each  of  the _m_e_t_a_c_h_a_r_a_c_t_e_r_s listed above under DDEEFFIINNIITTIIOONNSS has special
+       meaning to the shell and must be quoted if it is to represent itself.
+
+       When the command history expansion facilities are being used (see  HHIISS--
+       TTOORRYY EEXXPPAANNSSIIOONN below), the _h_i_s_t_o_r_y _e_x_p_a_n_s_i_o_n character, usually !!, must
+       be quoted to prevent history expansion.
+
+       There are  three  quoting  mechanisms:  the  _e_s_c_a_p_e  _c_h_a_r_a_c_t_e_r,  single
+       quotes, and double quotes.
+
+       A  non-quoted  backslash (\\) is the _e_s_c_a_p_e _c_h_a_r_a_c_t_e_r.  It preserves the
+       literal value of the next character that follows, with the exception of
+       <newline>.   If a \\<newline> pair appears, and the backslash is not it-
+       self quoted, the \\<newline> is treated as a line continuation (that is,
+       it is removed from the input stream and effectively ignored).
+
+       Enclosing  characters  in  single quotes preserves the literal value of
+       each character within the quotes.  A single quote may not occur between
+       single quotes, even when preceded by a backslash.
+
+       Enclosing  characters  in  double quotes preserves the literal value of
+       all characters within the quotes, with the exception of $$, ``,  \\,  and,
+       when history expansion is enabled, !!.  When the shell is in _p_o_s_i_x _m_o_d_e,
+       the !! has no special meaning within double quotes,  even  when  history
+       expansion  is  enabled.   The  characters  $$ and `` retain their special
+       meaning within double quotes.  The backslash retains its special  mean-
+       ing  only when followed by one of the following characters: $$, ``, "", \\,
+       or <<nneewwlliinnee>>.  A double quote may be quoted  within  double  quotes  by
+       preceding  it  with a backslash.  If enabled, history expansion will be
+       performed unless an !!  appearing in double quotes is  escaped  using  a
+       backslash.  The backslash preceding the !!  is not removed.
+
+       The  special  parameters  **  and  @@ have special meaning when in double
+       quotes (see PPAARRAAMMEETTEERRSS below).
+
+       Words of the form $$'_s_t_r_i_n_g' are treated specially.  The word expands to
+       _s_t_r_i_n_g,  with backslash-escaped characters replaced as specified by the
+       ANSI C standard.  Backslash escape sequences, if present,  are  decoded
+       as follows:
+              \\aa     alert (bell)
+              \\bb     backspace
+              \\ee
+              \\EE     an escape character
+              \\ff     form feed
+              \\nn     new line
+              \\rr     carriage return
+              \\tt     horizontal tab
+              \\vv     vertical tab
+              \\\\     backslash
+              \\''     single quote
+              \\""     double quote
+              \\??     question mark
+              \\_n_n_n   the  eight-bit  character  whose value is the octal value
+                     _n_n_n (one to three octal digits)
+              \\xx_H_H   the eight-bit character whose value  is  the  hexadecimal
+                     value _H_H (one or two hex digits)
+              \\uu_H_H_H_H the  Unicode (ISO/IEC 10646) character whose value is the
+                     hexadecimal value _H_H_H_H (one to four hex digits)
+              \\UU_H_H_H_H_H_H_H_H
+                     the Unicode (ISO/IEC 10646) character whose value is  the
+                     hexadecimal value _H_H_H_H_H_H_H_H (one to eight hex digits)
+              \\cc_x    a control-_x character
+
+       The  expanded  result  is  single-quoted, as if the dollar sign had not
+       been present.
+
+       A double-quoted string preceded by a dollar sign ($$"_s_t_r_i_n_g") will cause
+       the  string to be translated according to the current locale.  The _g_e_t_-
+       _t_e_x_t infrastructure performs the message catalog  lookup  and  transla-
+       tion,  using  the  LLCC__MMEESSSSAAGGEESS  and TTEEXXTTDDOOMMAAIINN shell variables.  If the
+       current locale is CC or PPOOSSIIXX, or if there are  no  translations  avail-
+       able,  the dollar sign is ignored.  If the string is translated and re-
+       placed, the replacement is double-quoted.
+
+PPAARRAAMMEETTEERRSS
+       A _p_a_r_a_m_e_t_e_r is an entity that stores values.  It can be a _n_a_m_e, a  num-
+       ber, or one of the special characters listed below under SSppeecciiaall PPaarraamm--
+       eetteerrss.  A _v_a_r_i_a_b_l_e is a parameter denoted by a _n_a_m_e.  A variable has  a
+       _v_a_l_u_e  and  zero or more _a_t_t_r_i_b_u_t_e_s.  Attributes are assigned using the
+       ddeeccllaarree builtin command (see ddeeccllaarree below in SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS).
+
+       A parameter is set if it has been assigned a value.  The null string is
+       a  valid  value.  Once a variable is set, it may be unset only by using
+       the uunnsseett builtin command (see SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS below).
+
+       A _v_a_r_i_a_b_l_e may be assigned to by a statement of the form
+
+              _n_a_m_e=[_v_a_l_u_e]
+
+       If _v_a_l_u_e is not given, the variable is assigned the null  string.   All
+       _v_a_l_u_e_s  undergo tilde expansion, parameter and variable expansion, com-
+       mand substitution, arithmetic expansion, and quote removal (see  EEXXPPAANN--
+       SSIIOONN below).  If the variable has its iinntteeggeerr attribute set, then _v_a_l_u_e
+       is evaluated as an arithmetic expression even if the $((...)) expansion
+       is  not  used  (see AArriitthhmmeettiicc EExxppaannssiioonn below).  Word splitting is not
+       performed, with the exception of ""$$@@"" as explained below under  SSppeecciiaall
+       PPaarraammeetteerrss.   Pathname  expansion  is not performed.  Assignment state-
+       ments may also appear as arguments to the aalliiaass, ddeeccllaarree, ttyyppeesseett,  eexx--
+       ppoorrtt,  rreeaaddoonnllyy,  and  llooccaall  builtin  commands (_d_e_c_l_a_r_a_t_i_o_n commands).
+       When in _p_o_s_i_x _m_o_d_e, these builtins may appear in a command after one or
+       more  instances  of  the  ccoommmmaanndd  builtin  and retain these assignment
+       statement properties.
+
+       In the context where an assignment statement is assigning a value to  a
+       shell variable or array index, the += operator can be used to append to
+       or add to the variable's previous value.  This  includes  arguments  to
+       builtin  commands  such  as  ddeeccllaarree  that accept assignment statements
+       (_d_e_c_l_a_r_a_t_i_o_n commands).  When += is applied to a variable for which the
+       _i_n_t_e_g_e_r attribute has been set, _v_a_l_u_e is evaluated as an arithmetic ex-
+       pression and added to the variable's current value, which is also eval-
+       uated.   When += is applied to an array variable using compound assign-
+       ment (see AArrrraayyss below), the variable's value is not unset  (as  it  is
+       when  using  =),  and new values are appended to the array beginning at
+       one greater than the array's maximum  index  (for  indexed  arrays)  or
+       added  as additional key-value pairs in an associative array.  When ap-
+       plied to a string-valued variable, _v_a_l_u_e is expanded  and  appended  to
+       the variable's value.
+
+       A variable can be assigned the _n_a_m_e_r_e_f attribute using the --nn option to
+       the ddeeccllaarree or llooccaall builtin commands (see the descriptions of  ddeeccllaarree
+       and  llooccaall  below) to create a _n_a_m_e_r_e_f, or a reference to another vari-
+       able.  This allows variables to be  manipulated  indirectly.   Whenever
+       the  nameref variable is referenced, assigned to, unset, or has its at-
+       tributes modified (other than using or changing the  _n_a_m_e_r_e_f  attribute
+       itself),  the operation is actually performed on the variable specified
+       by the nameref variable's value.  A nameref  is  commonly  used  within
+       shell functions to refer to a variable whose name is passed as an argu-
+       ment to the function.  For instance, if a variable name is passed to  a
+       shell function as its first argument, running
+              declare -n ref=$1
+       inside  the  function creates a nameref variable rreeff whose value is the
+       variable name passed as the first argument.  References and assignments
+       to  rreeff,  and changes to its attributes, are treated as references, as-
+       signments, and attribute modifications to the variable whose  name  was
+       passed  as  $$11.   If the control variable in a ffoorr loop has the nameref
+       attribute, the list of words can be a list of shell  variables,  and  a
+       name  reference will be established for each word in the list, in turn,
+       when the loop is executed.  Array variables cannot be given the nnaammeerreeff
+       attribute.   However,  nameref  variables can reference array variables
+       and subscripted array variables.  Namerefs can be unset  using  the  --nn
+       option  to the uunnsseett builtin.  Otherwise, if uunnsseett is executed with the
+       name of a nameref variable as an argument, the variable  referenced  by
+       the nameref variable will be unset.
+
+   PPoossiittiioonnaall PPaarraammeetteerrss
+       A  _p_o_s_i_t_i_o_n_a_l  _p_a_r_a_m_e_t_e_r  is a parameter denoted by one or more digits,
+       other than the single digit 0.  Positional parameters are assigned from
+       the  shell's  arguments when it is invoked, and may be reassigned using
+       the sseett builtin command.  Positional parameters may not be assigned  to
+       with  assignment statements.  The positional parameters are temporarily
+       replaced when a shell function is executed (see FFUUNNCCTTIIOONNSS below).
+
+       When a positional parameter consisting of more than a single  digit  is
+       expanded, it must be enclosed in braces (see EEXXPPAANNSSIIOONN below).
+
+   SSppeecciiaall PPaarraammeetteerrss
+       The  shell  treats  several parameters specially.  These parameters may
+       only be referenced; assignment to them is not allowed.
+       **      Expands to the positional parameters, starting from  one.   When
+              the  expansion  is not within double quotes, each positional pa-
+              rameter expands to a separate word.  In  contexts  where  it  is
+              performed, those words are subject to further word splitting and
+              pathname expansion.  When the  expansion  occurs  within  double
+              quotes,  it  expands to a single word with the value of each pa-
+              rameter separated by the first  character  of  the  IIFFSS  special
+              variable.   That  is, "$$**" is equivalent to "$$11_c$$22_c......", where _c
+              is the first character of the value of the IIFFSS variable.  If IIFFSS
+              is  unset,  the  parameters  are separated by spaces.  If IIFFSS is
+              null, the parameters are joined without intervening separators.
+       @@      Expands to the positional parameters,  starting  from  one.   In
+              contexts  where  word  splitting is performed, this expands each
+              positional parameter to a separate word; if  not  within  double
+              quotes,  these words are subject to word splitting.  In contexts
+              where word splitting is not performed, this expands to a  single
+              word  with each positional parameter separated by a space.  When
+              the expansion occurs within double quotes,  each  parameter  ex-
+              pands  to  a separate word.  That is, "$$@@" is equivalent to "$$11"
+              "$$22" ...  If the double-quoted expansion occurs within  a  word,
+              the  expansion  of the first parameter is joined with the begin-
+              ning part of the original word, and the expansion  of  the  last
+              parameter  is  joined  with  the last part of the original word.
+              When there are no positional parameters, "$$@@" and $$@@  expand  to
+              nothing (i.e., they are removed).
+       ##      Expands to the number of positional parameters in decimal.
+       ??      Expands  to  the exit status of the most recently executed fore-
+              ground pipeline.
+       --      Expands to the current option flags as  specified  upon  invoca-
+              tion,  by the sseett builtin command, or those set by the shell it-
+              self (such as the --ii option).
+       $$      Expands to the process ID of the shell.  In a  ()  subshell,  it
+              expands  to  the  process  ID of the current shell, not the sub-
+              shell.
+       !!      Expands to the process ID of the job most recently  placed  into
+              the  background,  whether executed as an asynchronous command or
+              using the bbgg builtin (see JJOOBB CCOONNTTRROOLL below).
+       00      Expands to the name of the shell or shell script.  This  is  set
+              at shell initialization.  If bbaasshh is invoked with a file of com-
+              mands, $$00 is set to the name of that file.  If bbaasshh  is  started
+              with  the  --cc option, then $$00 is set to the first argument after
+              the string to be executed, if one is present.  Otherwise, it  is
+              set  to  the  filename used to invoke bbaasshh, as given by argument
+              zero.
+
+   SShheellll VVaarriiaabblleess
+       The following variables are set by the shell:
+
+       __      At shell startup, set to the pathname used to invoke  the  shell
+              or  shell  script being executed as passed in the environment or
+              argument list.  Subsequently, expands to the  last  argument  to
+              the  previous  simple  command executed in the foreground, after
+              expansion.  Also set to the full pathname used  to  invoke  each
+              command  executed and placed in the environment exported to that
+              command.  When checking mail, this parameter holds the  name  of
+              the mail file currently being checked.
+       BBAASSHH   Expands  to  the  full  filename used to invoke this instance of
+              bbaasshh.
+       BBAASSHHOOPPTTSS
+              A colon-separated list of enabled shell options.  Each  word  in
+              the  list  is  a  valid  argument for the --ss option to the sshhoopptt
+              builtin command (see SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS below).  The options
+              appearing  in  BBAASSHHOOPPTTSS  are  those reported as _o_n by sshhoopptt.  If
+              this variable is in the environment when bbaasshh  starts  up,  each
+              shell  option  in  the  list  will be enabled before reading any
+              startup files.  This variable is read-only.
+       BBAASSHHPPIIDD
+              Expands to the process ID of the  current  bbaasshh  process.   This
+              differs  from  $$$$ under certain circumstances, such as subshells
+              that do not require bbaasshh to be re-initialized.   Assignments  to
+              BBAASSHHPPIIDD  have no effect.  If BBAASSHHPPIIDD is unset, it loses its spe-
+              cial properties, even if it is subsequently reset.
+       BBAASSHH__AALLIIAASSEESS
+              An associative array variable whose members  correspond  to  the
+              internal  list  of  aliases  as maintained by the aalliiaass builtin.
+              Elements added to this array appear in the alias list;  however,
+              unsetting  array elements currently does not cause aliases to be
+              removed from the alias list.  If BBAASSHH__AALLIIAASSEESS is unset, it loses
+              its special properties, even if it is subsequently reset.
+       BBAASSHH__AARRGGCC
+              An  array  variable whose values are the number of parameters in
+              each frame of the current bbaasshh execution call stack.  The number
+              of  parameters  to  the  current  subroutine  (shell function or
+              script executed with .. or ssoouurrccee) is at the top  of  the  stack.
+              When  a  subroutine is executed, the number of parameters passed
+              is pushed onto BBAASSHH__AARRGGCC.  The shell sets BBAASSHH__AARRGGCC only when in
+              extended debugging mode (see the description of the eexxttddeebbuugg op-
+              tion to the sshhoopptt builtin below).  Setting  eexxttddeebbuugg  after  the
+              shell has started to execute a script, or referencing this vari-
+              able when eexxttddeebbuugg is not set, may result in  inconsistent  val-
+              ues.
+       BBAASSHH__AARRGGVV
+              An  array  variable containing all of the parameters in the cur-
+              rent bbaasshh execution call stack.  The final parameter of the last
+              subroutine  call is at the top of the stack; the first parameter
+              of the initial call is at the bottom.  When a subroutine is exe-
+              cuted,  the  parameters supplied are pushed onto BBAASSHH__AARRGGVV.  The
+              shell sets BBAASSHH__AARRGGVV only when in extended debugging  mode  (see
+              the  description of the eexxttddeebbuugg option to the sshhoopptt builtin be-
+              low).  Setting eexxttddeebbuugg after the shell has started to execute a
+              script,  or  referencing this variable when eexxttddeebbuugg is not set,
+              may result in inconsistent values.
+       BBAASSHH__AARRGGVV00
+              When referenced, this variable expands to the name of the  shell
+              or shell script (identical to $$00; see the description of special
+              parameter 0 above).  Assignment to BBAASSHH__AARRGGVV00 causes  the  value
+              assigned  to also be assigned to $$00.  If BBAASSHH__AARRGGVV00 is unset, it
+              loses its special properties, even if it is subsequently reset.
+       BBAASSHH__CCMMDDSS
+              An associative array variable whose members  correspond  to  the
+              internal  hash  table  of  commands  as  maintained  by the hhaasshh
+              builtin.  Elements added to this array appear in the hash table;
+              however,  unsetting array elements currently does not cause com-
+              mand names to be removed from the hash table.  If  BBAASSHH__CCMMDDSS  is
+              unset,  it  loses  its  special properties, even if it is subse-
+              quently reset.
+       BBAASSHH__CCOOMMMMAANNDD
+              The command currently being executed or about  to  be  executed,
+              unless the shell is executing a command as the result of a trap,
+              in which case it is the command executing at  the  time  of  the
+              trap.   If  BBAASSHH__CCOOMMMMAANNDD  is unset, it loses its special proper-
+              ties, even if it is subsequently reset.
+       BBAASSHH__EEXXEECCUUTTIIOONN__SSTTRRIINNGG
+              The command argument to the --cc invocation option.
+       BBAASSHH__LLIINNEENNOO
+              An array variable whose members are the line numbers  in  source
+              files  where  each corresponding member of FFUUNNCCNNAAMMEE was invoked.
+              $${{BBAASSHH__LLIINNEENNOO[[_$_i]]}}  is  the  line  number  in  the  source  file
+              ($${{BBAASSHH__SSOOUURRCCEE[[_$_i_+_1]]}})  where  $${{FFUUNNCCNNAAMMEE[[_$_i]]}}  was  called  (or
+              $${{BBAASSHH__LLIINNEENNOO[[_$_i_-_1]]}} if referenced within  another  shell  func-
+              tion).  Use LLIINNEENNOO to obtain the current line number.
+       BBAASSHH__LLOOAADDAABBLLEESS__PPAATTHH
+              A  colon-separated  list of directories in which the shell looks
+              for dynamically loadable builtins specified by the  eennaabbllee  com-
+              mand.
+       BBAASSHH__RREEMMAATTCCHH
+              An  array  variable  whose members are assigned by the ==~~ binary
+              operator to the [[[[ conditional command.  The element with  index
+              0  is  the portion of the string matching the entire regular ex-
+              pression.  The element with index _n is the portion of the string
+              matching the _nth parenthesized subexpression.
+       BBAASSHH__SSOOUURRCCEE
+              An  array  variable whose members are the source filenames where
+              the corresponding shell function names  in  the  FFUUNNCCNNAAMMEE  array
+              variable are defined.  The shell function $${{FFUUNNCCNNAAMMEE[[_$_i]]}} is de-
+              fined  in  the   file   $${{BBAASSHH__SSOOUURRCCEE[[_$_i]]}}   and   called   from
+              $${{BBAASSHH__SSOOUURRCCEE[[_$_i_+_1]]}}.
+       BBAASSHH__SSUUBBSSHHEELLLL
+              Incremented  by one within each subshell or subshell environment
+              when the shell begins executing in that environment.   The  ini-
+              tial  value  is 0.  If BBAASSHH__SSUUBBSSHHEELLLL is unset, it loses its spe-
+              cial properties, even if it is subsequently reset.
+       BBAASSHH__VVEERRSSIINNFFOO
+              A readonly array variable whose members hold version information
+              for  this  instance  of  bbaasshh.  The values assigned to the array
+              members are as follows:
+              BBAASSHH__VVEERRSSIINNFFOO[[0]]        The major version number (the _r_e_l_e_a_s_e).
+              BBAASSHH__VVEERRSSIINNFFOO[[1]]        The minor version number (the _v_e_r_s_i_o_n).
+              BBAASSHH__VVEERRSSIINNFFOO[[2]]        The patch level.
+              BBAASSHH__VVEERRSSIINNFFOO[[3]]        The build version.
+              BBAASSHH__VVEERRSSIINNFFOO[[4]]        The release status (e.g., _b_e_t_a_1).
+              BBAASSHH__VVEERRSSIINNFFOO[[5]]        The value of MMAACCHHTTYYPPEE.
+       BBAASSHH__VVEERRSSIIOONN
+              Expands to a string describing the version of this  instance  of
+              bbaasshh.
+       CCOOMMPP__CCWWOORRDD
+              An  index  into $${{CCOOMMPP__WWOORRDDSS}} of the word containing the current
+              cursor position.  This variable is available only in shell func-
+              tions  invoked  by  the  programmable completion facilities (see
+              PPrrooggrraammmmaabbllee CCoommpplleettiioonn below).
+       CCOOMMPP__KKEEYY
+              The key (or final key of a key sequence) used to invoke the cur-
+              rent completion function.
+       CCOOMMPP__LLIINNEE
+              The  current  command  line.  This variable is available only in
+              shell functions and external commands invoked  by  the  program-
+              mable completion facilities (see PPrrooggrraammmmaabbllee CCoommpplleettiioonn below).
+       CCOOMMPP__PPOOIINNTT
+              The  index of the current cursor position relative to the begin-
+              ning of the current command.  If the current cursor position  is
+              at the end of the current command, the value of this variable is
+              equal to $${{##CCOOMMPP__LLIINNEE}}.  This  variable  is  available  only  in
+              shell  functions  and  external commands invoked by the program-
+              mable completion facilities (see PPrrooggrraammmmaabbllee CCoommpplleettiioonn below).
+       CCOOMMPP__TTYYPPEE
+              Set to an integer value corresponding to the type of  completion
+              attempted  that  caused a completion function to be called: _T_A_B,
+              for normal completion, _?, for listing completions after  succes-
+              sive  tabs,  _!, for listing alternatives on partial word comple-
+              tion, _@, to list completions if the word is not  unmodified,  or
+              _%,  for  menu  completion.   This  variable is available only in
+              shell functions and external commands invoked  by  the  program-
+              mable completion facilities (see PPrrooggrraammmmaabbllee CCoommpplleettiioonn below).
+       CCOOMMPP__WWOORRDDBBRREEAAKKSS
+              The  set  of characters that the rreeaaddlliinnee library treats as word
+              separators when performing word completion.  If  CCOOMMPP__WWOORRDDBBRREEAAKKSS
+              is  unset, it loses its special properties, even if it is subse-
+              quently reset.
+       CCOOMMPP__WWOORRDDSS
+              An array variable (see AArrrraayyss below) consisting of the  individ-
+              ual  words  in the current command line.  The line is split into
+              words as rreeaaddlliinnee would split it, using CCOOMMPP__WWOORRDDBBRREEAAKKSS  as  de-
+              scribed  above.   This variable is available only in shell func-
+              tions invoked by the  programmable  completion  facilities  (see
+              PPrrooggrraammmmaabbllee CCoommpplleettiioonn below).
+       CCOOPPRROOCC An  array  variable  (see AArrrraayyss below) created to hold the file
+              descriptors for output from and input to  an  unnamed  coprocess
+              (see CCoopprroocceesssseess above).
+       DDIIRRSSTTAACCKK
+              An array variable (see AArrrraayyss below) containing the current con-
+              tents of the directory stack.  Directories appear in  the  stack
+              in  the order they are displayed by the ddiirrss builtin.  Assigning
+              to members of this array variable may be used to modify directo-
+              ries  already in the stack, but the ppuusshhdd and ppooppdd builtins must
+              be used to add and remove directories.  Assignment to this vari-
+              able  will not change the current directory.  If DDIIRRSSTTAACCKK is un-
+              set, it loses its special properties, even if it is subsequently
+              reset.
+       EEPPOOCCHHRREEAALLTTIIMMEE
+              Each time this parameter is referenced, it expands to the number
+              of seconds since the Unix Epoch  (see  _t_i_m_e(3))  as  a  floating
+              point  value  with  micro-second  granularity.   Assignments  to
+              EEPPOOCCHHRREEAALLTTIIMMEE are ignored.  If EEPPOOCCHHRREEAALLTTIIMMEE is unset, it  loses
+              its special properties, even if it is subsequently reset.
+       EEPPOOCCHHSSEECCOONNDDSS
+              Each time this parameter is referenced, it expands to the number
+              of seconds since the Unix Epoch (see _t_i_m_e(3)).   Assignments  to
+              EEPPOOCCHHSSEECCOONNDDSS  are  ignored.   If EEPPOOCCHHSSEECCOONNDDSS is unset, it loses
+              its special properties, even if it is subsequently reset.
+       EEUUIIDD   Expands to the effective user ID of the current  user,  initial-
+              ized at shell startup.  This variable is readonly.
+       FFUUNNCCNNAAMMEE
+              An  array  variable  containing the names of all shell functions
+              currently in the execution call stack.  The element with index 0
+              is the name of any currently-executing shell function.  The bot-
+              tom-most element (the one with the  highest  index)  is  "main".
+              This  variable  exists  only when a shell function is executing.
+              Assignments to FFUUNNCCNNAAMMEE have no effect.  If FFUUNNCCNNAAMMEE  is  unset,
+              it  loses its special properties, even if it is subsequently re-
+              set.
+
+              This variable can be  used  with  BBAASSHH__LLIINNEENNOO  and  BBAASSHH__SSOOUURRCCEE.
+              Each   element   of   FFUUNNCCNNAAMMEE  has  corresponding  elements  in
+              BBAASSHH__LLIINNEENNOO and BBAASSHH__SSOOUURRCCEE to describe the call stack.  For in-
+              stance,    $${{FFUUNNCCNNAAMMEE[[_$_i]]}}    was    called    from   the   file
+              $${{BBAASSHH__SSOOUURRCCEE[[_$_i_+_1]]}} at  line  number  $${{BBAASSHH__LLIINNEENNOO[[_$_i]]}}.   The
+              ccaalllleerr builtin displays the current call stack using this infor-
+              mation.
+       GGRROOUUPPSS An array variable containing the list of  groups  of  which  the
+              current user is a member.  Assignments to GGRROOUUPPSS have no effect.
+              If GGRROOUUPPSS is unset, it loses its special properties, even if  it
+              is subsequently reset.
+       HHIISSTTCCMMDD
+              The history number, or index in the history list, of the current
+              command.  Assignments to HHIISSTTCCMMDD are ignored.  If HHIISSTTCCMMDD is un-
+              set, it loses its special properties, even if it is subsequently
+              reset.
+       HHOOSSTTNNAAMMEE
+              Automatically set to the name of the current host.
+       HHOOSSTTTTYYPPEE
+              Automatically set to a string that uniquely describes  the  type
+              of  machine  on which bbaasshh is executing.  The default is system-
+              dependent.
+       LLIINNEENNOO Each time this parameter is referenced, the shell substitutes  a
+              decimal  number  representing the current sequential line number
+              (starting with 1) within a script or function.  When  not  in  a
+              script  or  function, the value substituted is not guaranteed to
+              be meaningful.  If LLIINNEENNOO is unset, it loses its special proper-
+              ties, even if it is subsequently reset.
+       MMAACCHHTTYYPPEE
+              Automatically  set  to  a string that fully describes the system
+              type on which bbaasshh is executing, in the  standard  GNU  _c_p_u_-_c_o_m_-
+              _p_a_n_y_-_s_y_s_t_e_m format.  The default is system-dependent.
+       MMAAPPFFIILLEE
+              An  array  variable  (see AArrrraayyss below) created to hold the text
+              read by the mmaappffiillee builtin when no variable name is supplied.
+       OOLLDDPPWWDD The previous working directory as set by the ccdd command.
+       OOPPTTAARRGG The value of the last option argument processed by  the  ggeettooppttss
+              builtin command (see SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS below).
+       OOPPTTIINNDD The  index  of  the next argument to be processed by the ggeettooppttss
+              builtin command (see SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS below).
+       OOSSTTYYPPEE Automatically set to a string that describes the operating  sys-
+              tem  on  which  bbaasshh is executing.  The default is system-depen-
+              dent.
+       PPIIPPEESSTTAATTUUSS
+              An array variable (see AArrrraayyss below) containing a list  of  exit
+              status  values  from the processes in the most-recently-executed
+              foreground pipeline (which may contain only a single command).
+       PPPPIIDD   The process ID of the shell's parent.  This  variable  is  read-
+              only.
+       PPWWDD    The current working directory as set by the ccdd command.
+       RRAANNDDOOMM Each  time  this parameter is referenced, it expands to a random
+              integer between 0 and 32767.  Assigning a value to  RRAANNDDOOMM  ini-
+              tializes  (seeds)  the sequence of random numbers.  If RRAANNDDOOMM is
+              unset, it loses its special properties, even  if  it  is  subse-
+              quently reset.
+       RREEAADDLLIINNEE__LLIINNEE
+              The contents of the rreeaaddlliinnee line buffer, for use with "bind -x"
+              (see SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS below).
+       RREEAADDLLIINNEE__MMAARRKK
+              The position of the mark (saved insertion point) in the rreeaaddlliinnee
+              line  buffer, for use with "bind -x" (see SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS
+              below).  The characters between the insertion point and the mark
+              are often called the _r_e_g_i_o_n.
+       RREEAADDLLIINNEE__PPOOIINNTT
+              The position of the insertion point in the rreeaaddlliinnee line buffer,
+              for use with "bind -x" (see SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS below).
+       RREEPPLLYY  Set to the line of input read by the rreeaadd builtin  command  when
+              no arguments are supplied.
+       SSEECCOONNDDSS
+              Each  time  this  parameter is referenced, the number of seconds
+              since shell invocation is returned.  If a value is  assigned  to
+              SSEECCOONNDDSS,  the  value  returned upon subsequent references is the
+              number of seconds since the assignment plus the value  assigned.
+              The  number  of seconds at shell invocation and the current time
+              is always determined by querying the system clock.   If  SSEECCOONNDDSS
+              is  unset, it loses its special properties, even if it is subse-
+              quently reset.
+       SSHHEELLLLOOPPTTSS
+              A colon-separated list of enabled shell options.  Each  word  in
+              the  list  is  a  valid  argument  for  the --oo option to the sseett
+              builtin command (see SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS below).  The options
+              appearing  in  SSHHEELLLLOOPPTTSS are those reported as _o_n by sseett --oo.  If
+              this variable is in the environment when bbaasshh  starts  up,  each
+              shell  option  in  the  list  will be enabled before reading any
+              startup files.  This variable is read-only.
+       SSHHLLVVLL  Incremented by one each time an instance of bbaasshh is started.
+       SSRRAANNDDOOMM
+              This variable expands to a 32-bit pseudo-random number each time
+              it  is  referenced. The random number generator is not linear on
+              systems that support /dev/urandom or  _a_r_c_4_r_a_n_d_o_m,  so  each  re-
+              turned  number  has no relationship to the numbers preceding it.
+              The random number generator cannot be seeded, so assignments  to
+              this variable have no effect.  If SSRRAANNDDOOMM is unset, it loses its
+              special properties, even if it is subsequently reset.
+       UUIIDD    Expands to the user ID of the current user, initialized at shell
+              startup.  This variable is readonly.
+
+       The following variables are used by the shell.  In some cases, bbaasshh as-
+       signs a default value to a variable; these cases are noted below.
+
+       BBAASSHH__CCOOMMPPAATT
+              The value is used to set the shell's compatibility  level.   See
+              SSHHEELLLL  CCOOMMPPAATTIIBBIILLIITTYY MMOODDEE below for a description of the various
+              compatibility levels and their effects.  The value may be a dec-
+              imal  number  (e.g., 4.2) or an integer (e.g., 42) corresponding
+              to the desired compatibility level.  If BBAASSHH__CCOOMMPPAATT is unset  or
+              set  to  the empty string, the compatibility level is set to the
+              default for the current version.  If BBAASSHH__CCOOMMPPAATT  is  set  to  a
+              value  that  is  not  one of the valid compatibility levels, the
+              shell prints an error message and sets the  compatibility  level
+              to the default for the current version.  The valid values corre-
+              spond to the compatibility levels described below under  BBSSHHEELLLL--
+              COMPATIBILITYMMOODDEE.   For  example,  4.2  and 42 are valid values
+              that correspond to the ccoommppaatt4422 sshhoopptt option and set the compat-
+              ibility level to 42.  The current version is also a valid value.
+       BBAASSHH__EENNVV
+              If  this parameter is set when bbaasshh is executing a shell script,
+              its value is interpreted as a filename  containing  commands  to
+              initialize the shell, as in _~_/_._b_a_s_h_r_c.  The value of BBAASSHH__EENNVV is
+              subjected to  parameter  expansion,  command  substitution,  and
+              arithmetic  expansion  before  being  interpreted as a filename.
+              PPAATTHH is not used to search for the resultant filename.
+       BBAASSHH__XXTTRRAACCEEFFDD
+              If set to an integer corresponding to a valid  file  descriptor,
+              bbaasshh  will  write  the trace output generated when _s_e_t _-_x is en-
+              abled to that file descriptor.  The file  descriptor  is  closed
+              when  BBAASSHH__XXTTRRAACCEEFFDD is unset or assigned a new value.  Unsetting
+              BBAASSHH__XXTTRRAACCEEFFDD or assigning it the empty string causes the  trace
+              output  to  be  sent  to  the standard error.  Note that setting
+              BBAASSHH__XXTTRRAACCEEFFDD to 2 (the standard error file descriptor) and then
+              unsetting it will result in the standard error being closed.
+       CCDDPPAATTHH The  search  path for the ccdd command.  This is a colon-separated
+              list of directories in which the shell looks for destination di-
+              rectories  specified  by  the  ccdd  command.   A  sample value is
+              ".:~:/usr".
+       CCHHIILLDD__MMAAXX
+              Set the number of exited child status values for  the  shell  to
+              remember.   Bash will not allow this value to be decreased below
+              a POSIX-mandated minimum, and there is  a  maximum  value  (cur-
+              rently  8192)  that  this  may not exceed.  The minimum value is
+              system-dependent.
+       CCOOLLUUMMNNSS
+              Used by the sseelleecctt compound command to  determine  the  terminal
+              width  when  printing selection lists.  Automatically set if the
+              cchheecckkwwiinnssiizzee option is enabled or in an interactive  shell  upon
+              receipt of a SSIIGGWWIINNCCHH.
+       CCOOMMPPRREEPPLLYY
+              An array variable from which bbaasshh reads the possible completions
+              generated by a shell function invoked by the  programmable  com-
+              pletion  facility (see PPrrooggrraammmmaabbllee CCoommpplleettiioonn below).  Each ar-
+              ray element contains one possible completion.
+       EEMMAACCSS  If bbaasshh finds this variable in the environment  when  the  shell
+              starts  with  value "t", it assumes that the shell is running in
+              an Emacs shell buffer and disables line editing.
+       EENNVV    Expanded and executed  similarly  to  BBAASSHH__EENNVV  (see  IINNVVOOCCAATTIIOONN
+              above) when an interactive shell is invoked in _p_o_s_i_x _m_o_d_e.
+       EEXXEECCIIGGNNOORREE
+              A  colon-separated list of shell patterns (see PPaatttteerrnn MMaattcchhiinngg)
+              defining the list of filenames to be ignored by  command  search
+              using  PPAATTHH.  Files whose full pathnames match one of these pat-
+              terns are not considered executable files for  the  purposes  of
+              completion and command execution via PPAATTHH lookup.  This does not
+              affect the behavior of the [[, tteesstt, and [[[[ commands.  Full path-
+              names  in  the command hash table are not subject to EEXXEECCIIGGNNOORREE.
+              Use this variable to ignore shared library files that  have  the
+              executable  bit  set, but are not executable files.  The pattern
+              matching honors the setting of the eexxttgglloobb shell option.
+       FFCCEEDDIITT The default editor for the ffcc builtin command.
+       FFIIGGNNOORREE
+              A colon-separated list of suffixes  to  ignore  when  performing
+              filename completion (see RREEAADDLLIINNEE below).  A filename whose suf-
+              fix matches one of the entries in FFIIGGNNOORREE is excluded  from  the
+              list of matched filenames.  A sample value is ".o:~".
+       FFUUNNCCNNEESSTT
+              If  set  to  a  numeric  value greater than 0, defines a maximum
+              function nesting level.  Function invocations that  exceed  this
+              nesting level will cause the current command to abort.
+       GGLLOOBBIIGGNNOORREE
+              A  colon-separated  list  of  patterns  defining the set of file
+              names to be ignored by  pathname  expansion.   If  a  file  name
+              matched  by a pathname expansion pattern also matches one of the
+              patterns in GGLLOOBBIIGGNNOORREE, it is removed from the list of matches.
+       HHIISSTTCCOONNTTRROOLL
+              A colon-separated list of values controlling  how  commands  are
+              saved  on  the history list.  If the list of values includes _i_g_-
+              _n_o_r_e_s_p_a_c_e, lines which begin with  a  ssppaaccee  character  are  not
+              saved  in  the history list.  A value of _i_g_n_o_r_e_d_u_p_s causes lines
+              matching the previous history entry to not be saved.  A value of
+              _i_g_n_o_r_e_b_o_t_h is shorthand for _i_g_n_o_r_e_s_p_a_c_e and _i_g_n_o_r_e_d_u_p_s.  A value
+              of _e_r_a_s_e_d_u_p_s causes all previous lines matching the current line
+              to  be  removed from the history list before that line is saved.
+              Any value not in the above list is ignored.  If  HHIISSTTCCOONNTTRROOLL  is
+              unset,  or does not include a valid value, all lines read by the
+              shell parser are saved on the history list, subject to the value
+              of  HHIISSTTIIGGNNOORREE.  The second and subsequent lines of a multi-line
+              compound command are not tested, and are added  to  the  history
+              regardless of the value of HHIISSTTCCOONNTTRROOLL.
+       HHIISSTTFFIILLEE
+              The name of the file in which command history is saved (see HHIISS--
+              TTOORRYY below).  The default value is _~_/_._b_a_s_h___h_i_s_t_o_r_y.   If  unset,
+              the command history is not saved when a shell exits.
+       HHIISSTTFFIILLEESSIIZZEE
+              The maximum number of lines contained in the history file.  When
+              this variable is assigned a value, the  history  file  is  trun-
+              cated,  if  necessary,  to  contain  no more than that number of
+              lines by removing the oldest entries.  The history file is  also
+              truncated  to this size after writing it when a shell exits.  If
+              the value is 0, the history file  is  truncated  to  zero  size.
+              Non-numeric  values  and  numeric  values less than zero inhibit
+              truncation.  The shell sets the default value to  the  value  of
+              HHIISSTTSSIIZZEE after reading any startup files.
+       HHIISSTTIIGGNNOORREE
+              A  colon-separated list of patterns used to decide which command
+              lines should be saved on the history list.  Each pattern is  an-
+              chored  at the beginning of the line and must match the complete
+              line (no implicit `**' is  appended).   Each  pattern  is  tested
+              against  the  line after the checks specified by HHIISSTTCCOONNTTRROOLL are
+              applied.  In addition to the normal shell pattern matching char-
+              acters,  `&&'  matches the previous history line.  `&&' may be es-
+              caped using a backslash; the backslash  is  removed  before  at-
+              tempting  a  match.  The second and subsequent lines of a multi-
+              line compound command are not tested, and are added to the  his-
+              tory  regardless of the value of HHIISSTTIIGGNNOORREE.  The pattern match-
+              ing honors the setting of the eexxttgglloobb shell option.
+       HHIISSTTSSIIZZEE
+              The number of commands to remember in the command  history  (see
+              HHIISSTTOORRYY  below).   If  the value is 0, commands are not saved in
+              the history list.  Numeric values less than zero result in every
+              command  being  saved  on  the history list (there is no limit).
+              The shell sets the  default  value  to  500  after  reading  any
+              startup files.
+       HHIISSTTTTIIMMEEFFOORRMMAATT
+              If  this  variable  is  set and not null, its value is used as a
+              format string for _s_t_r_f_t_i_m_e(3) to print the time stamp associated
+              with  each  history  entry displayed by the hhiissttoorryy builtin.  If
+              this variable is set, time stamps are  written  to  the  history
+              file  so they may be preserved across shell sessions.  This uses
+              the history comment character  to  distinguish  timestamps  from
+              other history lines.
+       HHOOMMEE   The home directory of the current user; the default argument for
+              the ccdd builtin command.  The value of this variable is also used
+              when performing tilde expansion.
+       HHOOSSTTFFIILLEE
+              Contains  the  name  of  a file in the same format as _/_e_t_c_/_h_o_s_t_s
+              that should be read when the shell needs to complete a hostname.
+              The  list  of possible hostname completions may be changed while
+              the shell is running; the next time hostname completion  is  at-
+              tempted  after  the  value is changed, bbaasshh adds the contents of
+              the new file to the existing list.  If HHOOSSTTFFIILLEE is set, but  has
+              no  value,  or  does  not name a readable file, bbaasshh attempts to
+              read _/_e_t_c_/_h_o_s_t_s to obtain the list of possible hostname  comple-
+              tions.  When HHOOSSTTFFIILLEE is unset, the hostname list is cleared.
+       IIFFSS    The _I_n_t_e_r_n_a_l _F_i_e_l_d _S_e_p_a_r_a_t_o_r that is used for word splitting af-
+              ter expansion and to  split  lines  into  words  with  the  rreeaadd
+              builtin  command.   The  default  value  is  ``<space><tab><new-
+              line>''.
+       IIGGNNOORREEEEOOFF
+              Controls the action of an interactive shell on receipt of an EEOOFF
+              character as the sole input.  If set, the value is the number of
+              consecutive EEOOFF characters which must  be  typed  as  the  first
+              characters  on an input line before bbaasshh exits.  If the variable
+              exists but does not have a numeric value, or has no  value,  the
+              default  value  is  10.  If it does not exist, EEOOFF signifies the
+              end of input to the shell.
+       IINNPPUUTTRRCC
+              The filename for the rreeaaddlliinnee startup file, overriding  the  de-
+              fault of _~_/_._i_n_p_u_t_r_c (see RREEAADDLLIINNEE below).
+       IINNSSIIDDEE__EEMMAACCSS
+              If  this  variable  appears  in  the  environment when the shell
+              starts, bbaasshh assumes that it is running inside  an  Emacs  shell
+              buffer  and  may disable line editing, depending on the value of
+              TTEERRMM.
+       LLAANNGG   Used to determine the  locale  category  for  any  category  not
+              specifically selected with a variable starting with LLCC__.
+       LLCC__AALLLL This  variable  overrides  the  value  of LLAANNGG and any other LLCC__
+              variable specifying a locale category.
+       LLCC__CCOOLLLLAATTEE
+              This variable determines the collation order used  when  sorting
+              the  results  of pathname expansion, and determines the behavior
+              of range expressions, equivalence  classes,  and  collating  se-
+              quences within pathname expansion and pattern matching.
+       LLCC__CCTTYYPPEE
+              This  variable  determines  the interpretation of characters and
+              the behavior of character classes within pathname expansion  and
+              pattern matching.
+       LLCC__MMEESSSSAAGGEESS
+              This  variable  determines  the locale used to translate double-
+              quoted strings preceded by a $$.
+       LLCC__NNUUMMEERRIICC
+              This variable determines the locale  category  used  for  number
+              formatting.
+       LLCC__TTIIMMEE
+              This  variable  determines the locale category used for data and
+              time formatting.
+       LLIINNEESS  Used by the sseelleecctt compound  command  to  determine  the  column
+              length  for  printing selection lists.  Automatically set if the
+              cchheecckkwwiinnssiizzee option is enabled or in an interactive  shell  upon
+              receipt of a SSIIGGWWIINNCCHH.
+       MMAAIILL   If  this  parameter  is  set to a file or directory name and the
+              MMAAIILLPPAATTHH variable is not set, bbaasshh informs the user of  the  ar-
+              rival of mail in the specified file or Maildir-format directory.
+       MMAAIILLCCHHEECCKK
+              Specifies  how often (in seconds) bbaasshh checks for mail.  The de-
+              fault is 60 seconds.  When it is time to  check  for  mail,  the
+              shell  does  so  before  displaying the primary prompt.  If this
+              variable is unset, or set to  a  value  that  is  not  a  number
+              greater than or equal to zero, the shell disables mail checking.
+       MMAAIILLPPAATTHH
+              A colon-separated list of filenames to be checked for mail.  The
+              message to be printed when mail arrives in a particular file may
+              be  specified by separating the filename from the message with a
+              `?'.  When used in the text of the message, $$__  expands  to  the
+              name of the current mailfile.  Example:
+              MMAAIILLPPAATTHH='/var/mail/bfox?"You  have  mail":~/shell-mail?"$_  has
+              mail!"'
+              BBaasshh can be configured to supply a default value for this  vari-
+              able  (there  is  no  value by default), but the location of the
+              user  mail  files  that  it  uses  is  system  dependent  (e.g.,
+              /var/mail/$$UUSSEERR).
+       OOPPTTEERRRR If set to the value 1, bbaasshh displays error messages generated by
+              the ggeettooppttss builtin command (see SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS  below).
+              OOPPTTEERRRR  is  initialized to 1 each time the shell is invoked or a
+              shell script is executed.
+       PPAATTHH   The search path for commands.  It is a colon-separated  list  of
+              directories  in  which the shell looks for commands (see CCOOMMMMAANNDD
+              EEXXEECCUUTTIIOONN below).  A zero-length (null) directory  name  in  the
+              value of PPAATTHH indicates the current directory.  A null directory
+              name may appear as two adjacent colons,  or  as  an  initial  or
+              trailing  colon.   The  default path is system-dependent, and is
+              set by the administrator who installs bbaasshh.  A common value is
+              ``/usr/local/bin:/usr/lo-
+              cal/sbin:/usr/bin:/usr/sbin:/bin:/sbin''.
+       PPOOSSIIXXLLYY__CCOORRRREECCTT
+              If this variable is in the environment  when  bbaasshh  starts,  the
+              shell  enters _p_o_s_i_x _m_o_d_e before reading the startup files, as if
+              the ----ppoossiixx invocation option had been supplied.  If it  is  set
+              while  the  shell is running, bbaasshh enables _p_o_s_i_x _m_o_d_e, as if the
+              command _s_e_t _-_o _p_o_s_i_x had been executed.  When the  shell  enters
+              _p_o_s_i_x _m_o_d_e, it sets this variable if it was not already set.
+       PPRROOMMPPTT__CCOOMMMMAANNDD
+              If  this variable is set, and is an array, the value of each set
+              element is executed as a command prior to issuing  each  primary
+              prompt.   If this is set but not an array variable, its value is
+              used as a command to execute instead.
+       PPRROOMMPPTT__DDIIRRTTRRIIMM
+              If set to a number greater than zero, the value is used  as  the
+              number of trailing directory components to retain when expanding
+              the \\ww and \\WW  prompt  string  escapes  (see  PPRROOMMPPTTIINNGG  below).
+              Characters removed are replaced with an ellipsis.
+       PPSS00    The  value  of  this parameter is expanded (see PPRROOMMPPTTIINNGG below)
+              and displayed by interactive shells after reading a command  and
+              before the command is executed.
+       PPSS11    The  value  of  this parameter is expanded (see PPRROOMMPPTTIINNGG below)
+              and used as the primary prompt string.   The  default  value  is
+              ``\\ss--\\vv\\$$ ''.
+       PPSS22    The  value of this parameter is expanded as with PPSS11 and used as
+              the secondary prompt string.  The default is ``>> ''.
+       PPSS33    The value of this parameter is used as the prompt for the sseelleecctt
+              command (see SSHHEELLLL GGRRAAMMMMAARR above).
+       PPSS44    The  value  of  this  parameter  is expanded as with PPSS11 and the
+              value is printed before each command bbaasshh displays during an ex-
+              ecution trace.  The first character of the expanded value of PPSS44
+              is replicated multiple times, as necessary, to indicate multiple
+              levels of indirection.  The default is ``++ ''.
+       SSHHEELLLL  This  variable expands to the full pathname to the shell.  If it
+              is not set when the shell starts, bbaasshh assigns to  it  the  full
+              pathname of the current user's login shell.
+       TTIIMMEEFFOORRMMAATT
+              The  value of this parameter is used as a format string specify-
+              ing how the timing information for pipelines prefixed  with  the
+              ttiimmee  reserved word should be displayed.  The %% character intro-
+              duces an escape sequence that is expanded to  a  time  value  or
+              other  information.  The escape sequences and their meanings are
+              as follows; the braces denote optional portions.
+              %%%%        A literal %%.
+              %%[[_p]][[ll]]RR  The elapsed time in seconds.
+              %%[[_p]][[ll]]UU  The number of CPU seconds spent in user mode.
+              %%[[_p]][[ll]]SS  The number of CPU seconds spent in system mode.
+              %%PP        The CPU percentage, computed as (%U + %S) / %R.
+
+              The optional _p is a digit specifying the _p_r_e_c_i_s_i_o_n,  the  number
+              of fractional digits after a decimal point.  A value of 0 causes
+              no decimal point or fraction to be output.  At most three places
+              after  the  decimal  point may be specified; values of _p greater
+              than 3 are changed to 3.  If _p is not specified, the value 3  is
+              used.
+
+              The  optional ll specifies a longer format, including minutes, of
+              the form _M_Mm_S_S._F_Fs.  The value of _p determines  whether  or  not
+              the fraction is included.
+
+              If  this  variable  is not set, bbaasshh acts as if it had the value
+              $$''\\nnrreeaall\\tt%%33llRR\\nnuusseerr\\tt%%33llUU\\nnssyyss\\tt%%33llSS''.  If the value  is  null,
+              no timing information is displayed.  A trailing newline is added
+              when the format string is displayed.
+       TTMMOOUUTT  If set to a value greater than zero, TTMMOOUUTT is treated as the de-
+              fault  timeout  for the rreeaadd builtin.  The sseelleecctt command termi-
+              nates if input does not arrive after TTMMOOUUTT seconds when input is
+              coming  from  a terminal.  In an interactive shell, the value is
+              interpreted as the number of seconds to wait for a line of input
+              after issuing the primary prompt.  BBaasshh terminates after waiting
+              for that number of seconds if a complete line of input does  not
+              arrive.
+       TTMMPPDDIIRR If  set, bbaasshh uses its value as the name of a directory in which
+              bbaasshh creates temporary files for the shell's use.
+       aauuttoo__rreessuummee
+              This variable controls how the shell interacts with the user and
+              job  control.   If this variable is set, single word simple com-
+              mands without redirections are treated as candidates for resump-
+              tion of an existing stopped job.  There is no ambiguity allowed;
+              if there is more than one job beginning with the  string  typed,
+              the  job  most  recently  accessed  is  selected.  The _n_a_m_e of a
+              stopped job, in this context, is the command line used to  start
+              it.   If  set to the value _e_x_a_c_t, the string supplied must match
+              the name of a stopped job exactly;  if  set  to  _s_u_b_s_t_r_i_n_g,  the
+              string  supplied  needs  to  match  a substring of the name of a
+              stopped job.  The _s_u_b_s_t_r_i_n_g value provides functionality  analo-
+              gous  to the %%??  job identifier (see JJOOBB CCOONNTTRROOLL below).  If set
+              to any other value, the supplied string must be a  prefix  of  a
+              stopped job's name; this provides functionality analogous to the
+              %%_s_t_r_i_n_g job identifier.
+       hhiissttcchhaarrss
+              The two or three characters which control history expansion  and
+              tokenization (see HHIISSTTOORRYY EEXXPPAANNSSIIOONN below).  The first character
+              is the _h_i_s_t_o_r_y _e_x_p_a_n_s_i_o_n character, the character which  signals
+              the  start  of  a  history  expansion, normally `!!'.  The second
+              character is the _q_u_i_c_k _s_u_b_s_t_i_t_u_t_i_o_n character, which is used  as
+              shorthand  for  re-running the previous command entered, substi-
+              tuting one string for another in the command.   The  default  is
+              `^^'.   The optional third character is the character which indi-
+              cates that the remainder of the line is a comment when found  as
+              the  first  character of a word, normally `##'.  The history com-
+              ment character causes history substitution to be skipped for the
+              remaining  words on the line.  It does not necessarily cause the
+              shell parser to treat the rest of the line as a comment.
+
+   AArrrraayyss
+       BBaasshh provides one-dimensional indexed and associative array  variables.
+       Any  variable may be used as an indexed array; the ddeeccllaarree builtin will
+       explicitly declare an array.  There is no maximum limit on the size  of
+       an  array, nor any requirement that members be indexed or assigned con-
+       tiguously.  Indexed arrays are  referenced  using  integers  (including
+       arithmetic expressions) and are zero-based; associative arrays are ref-
+       erenced using arbitrary strings.  Unless otherwise noted, indexed array
+       indices must be non-negative integers.
+
+       An  indexed  array is created automatically if any variable is assigned
+       to using the syntax _n_a_m_e[_s_u_b_s_c_r_i_p_t]=_v_a_l_u_e.  The _s_u_b_s_c_r_i_p_t is treated as
+       an arithmetic expression that must evaluate to a number.  To explicitly
+       declare an indexed array, use ddeeccllaarree --aa _n_a_m_e (see SSHHEELLLL  BBUUIILLTTIINN  CCOOMM--
+       MMAANNDDSS  below).   ddeeccllaarree  --aa _n_a_m_e[[_s_u_b_s_c_r_i_p_t]] is also accepted; the _s_u_b_-
+       _s_c_r_i_p_t is ignored.
+
+       Associative arrays are created using ddeeccllaarree --AA _n_a_m_e.
+
+       Attributes may be specified for an array variable using the ddeeccllaarree and
+       rreeaaddoonnllyy builtins.  Each attribute applies to all members of an array.
+
+       Arrays   are  assigned  to  using  compound  assignments  of  the  form
+       _n_a_m_e=((value_1 ... value_n)), where each _v_a_l_u_e may be  of  the  form  [_s_u_b_-
+       _s_c_r_i_p_t]=_s_t_r_i_n_g.   Indexed array assignments do not require anything but
+       _s_t_r_i_n_g.  Each _v_a_l_u_e in the list is expanded using all the shell  expan-
+       sions  described  below under EEXXPPAANNSSIIOONN.  When assigning to indexed ar-
+       rays, if the optional brackets and subscript are supplied,  that  index
+       is assigned to; otherwise the index of the element assigned is the last
+       index assigned to by the statement plus one.  Indexing starts at zero.
+
+       When assigning to an associative array, the words in a compound assign-
+       ment  may  be  either assignment statements, for which the subscript is
+       required, or a list of words that is interpreted as a sequence  of  al-
+       ternating  keys and values: _n_a_m_e=(( _k_e_y_1 _v_a_l_u_e_1 _k_e_y_2 _v_a_l_u_e_2 ...)).  These
+       are treated identically to  _n_a_m_e=((  [_k_e_y_1]=_v_a_l_u_e_1  [_k_e_y_2]=_v_a_l_u_e_2  ...)).
+       The  first  word in the list determines how the remaining words are in-
+       terpreted; all assignments in a list must be of the  same  type.   When
+       using  key/value  pairs,  the keys may not be missing or empty; a final
+       missing value is treated like the empty string.
+
+       This syntax is also accepted by the ddeeccllaarree builtin.  Individual  array
+       elements  may be assigned to using the _n_a_m_e[_s_u_b_s_c_r_i_p_t]=_v_a_l_u_e syntax in-
+       troduced above.  When assigning to an indexed array, if  _n_a_m_e  is  sub-
+       scripted  by  a negative number, that number is interpreted as relative
+       to one greater than the maximum index  of  _n_a_m_e,  so  negative  indices
+       count back from the end of the array, and an index of -1 references the
+       last element.
+
+       Any element of an array may  be  referenced  using  ${_n_a_m_e[_s_u_b_s_c_r_i_p_t]}.
+       The braces are required to avoid conflicts with pathname expansion.  If
+       _s_u_b_s_c_r_i_p_t is @@ or **, the word expands to all members  of  _n_a_m_e.   These
+       subscripts  differ only when the word appears within double quotes.  If
+       the word is double-quoted, ${_n_a_m_e[*]} expands to a single word with the
+       value  of each array member separated by the first character of the IIFFSS
+       special variable, and ${_n_a_m_e[@]} expands each element of _n_a_m_e to a sep-
+       arate  word.   When  there  are no array members, ${_n_a_m_e[@]} expands to
+       nothing.  If the double-quoted expansion occurs within a word, the  ex-
+       pansion of the first parameter is joined with the beginning part of the
+       original word, and the expansion of the last parameter is  joined  with
+       the last part of the original word.  This is analogous to the expansion
+       of the special parameters **  and  @@  (see  SSppeecciiaall  PPaarraammeetteerrss  above).
+       ${#_n_a_m_e[_s_u_b_s_c_r_i_p_t]}  expands  to  the length of ${_n_a_m_e[_s_u_b_s_c_r_i_p_t]}.  If
+       _s_u_b_s_c_r_i_p_t is ** or @@, the expansion is the number of elements in the ar-
+       ray.  If the _s_u_b_s_c_r_i_p_t used to reference an element of an indexed array
+       evaluates to a number less than zero, it is interpreted as relative  to
+       one  greater  than  the maximum index of the array, so negative indices
+       count back from the end of the array, and an index of -1 references the
+       last element.
+
+       Referencing an array variable without a subscript is equivalent to ref-
+       erencing the array with a subscript of 0.  Any reference to a  variable
+       using a valid subscript is legal, and bbaasshh will create an array if nec-
+       essary.
+
+       An array variable is considered set if a subscript has been assigned  a
+       value.  The null string is a valid value.
+
+       It  is possible to obtain the keys (indices) of an array as well as the
+       values.  ${!!_n_a_m_e[_@]} and ${!!_n_a_m_e[_*]} expand to the indices assigned  in
+       array variable _n_a_m_e.  The treatment when in double quotes is similar to
+       the expansion of the special parameters _@ and _* within double quotes.
+
+       The uunnsseett builtin is used to destroy arrays.  uunnsseett _n_a_m_e[_s_u_b_s_c_r_i_p_t] de-
+       stroys the array element at index _s_u_b_s_c_r_i_p_t, for both indexed and asso-
+       ciative arrays.  Negative subscripts to indexed arrays are  interpreted
+       as  described  above.   Unsetting the last element of an array variable
+       does not unset the variable.  uunnsseett _n_a_m_e, where _n_a_m_e is  an  array,  or
+       uunnsseett  _n_a_m_e[_s_u_b_s_c_r_i_p_t],  where  _s_u_b_s_c_r_i_p_t is ** or @@, removes the entire
+       array.
+
+       When using a variable name with a subscript as an argument  to  a  com-
+       mand,  such  as with uunnsseett, without using the word expansion syntax de-
+       scribed above, the argument is subject to pathname expansion.  If path-
+       name expansion is not desired, the argument should be quoted.
+
+       The  ddeeccllaarree,  llooccaall,  and rreeaaddoonnllyy builtins each accept a --aa option to
+       specify an indexed array and a --AA option to specify an associative  ar-
+       ray.   If  both  options  are  supplied, --AA takes precedence.  The rreeaadd
+       builtin accepts a --aa option to assign a list of  words  read  from  the
+       standard input to an array.  The sseett and ddeeccllaarree builtins display array
+       values in a way that allows them to be reused as assignments.
+
+EEXXPPAANNSSIIOONN
+       Expansion is performed on the command line after it has been split into
+       words.   There are seven kinds of expansion performed: _b_r_a_c_e _e_x_p_a_n_s_i_o_n,
+       _t_i_l_d_e _e_x_p_a_n_s_i_o_n, _p_a_r_a_m_e_t_e_r _a_n_d _v_a_r_i_a_b_l_e  _e_x_p_a_n_s_i_o_n,  _c_o_m_m_a_n_d  _s_u_b_s_t_i_t_u_-
+       _t_i_o_n, _a_r_i_t_h_m_e_t_i_c _e_x_p_a_n_s_i_o_n, _w_o_r_d _s_p_l_i_t_t_i_n_g, and _p_a_t_h_n_a_m_e _e_x_p_a_n_s_i_o_n.
+
+       The order of expansions is: brace expansion; tilde expansion, parameter
+       and variable expansion, arithmetic expansion, and command  substitution
+       (done  in a left-to-right fashion); word splitting; and pathname expan-
+       sion.
+
+       On systems that can support it, there is an additional expansion avail-
+       able:  _p_r_o_c_e_s_s  _s_u_b_s_t_i_t_u_t_i_o_n.   This  is  performed at the same time as
+       tilde, parameter, variable, and arithmetic expansion and  command  sub-
+       stitution.
+
+       After  these  expansions are performed, quote characters present in the
+       original word are removed  unless  they  have  been  quoted  themselves
+       (_q_u_o_t_e _r_e_m_o_v_a_l).
+
+       Only  brace  expansion,  word splitting, and pathname expansion can in-
+       crease the number of words of the expansion; other expansions expand  a
+       single  word to a single word.  The only exceptions to this are the ex-
+       pansions  of  "$$@@"  and  "$${{_n_a_m_e[[@@]]}}",  and,  in  most  cases,  $$**  and
+       $${{_n_a_m_e[[**]]}} as explained above (see PPAARRAAMMEETTEERRSS).
+
+   BBrraaccee EExxppaannssiioonn
+       _B_r_a_c_e _e_x_p_a_n_s_i_o_n is a mechanism by which arbitrary strings may be gener-
+       ated.  This mechanism is similar to _p_a_t_h_n_a_m_e _e_x_p_a_n_s_i_o_n, but  the  file-
+       names generated need not exist.  Patterns to be brace expanded take the
+       form of an optional _p_r_e_a_m_b_l_e, followed by either a series of comma-sep-
+       arated  strings or a sequence expression between a pair of braces, fol-
+       lowed by an optional _p_o_s_t_s_c_r_i_p_t.  The  preamble  is  prefixed  to  each
+       string contained within the braces, and the postscript is then appended
+       to each resulting string, expanding left to right.
+
+       Brace expansions may be nested.  The results of  each  expanded  string
+       are  not  sorted;  left  to  right  order  is  preserved.  For example,
+       a{{d,c,b}}e expands into `ade ace abe'.
+
+       A sequence expression takes the form {{_x...._y[[...._i_n_c_r]]}}, where _x and _y  are
+       either  integers or single characters, and _i_n_c_r, an optional increment,
+       is an integer.  When integers are supplied, the expression  expands  to
+       each  number between _x and _y, inclusive.  Supplied integers may be pre-
+       fixed with _0 to force each term to have the same width.  When either  _x
+       or  _y  begins  with  a  zero, the shell attempts to force all generated
+       terms to contain the same number of digits, zero-padding  where  neces-
+       sary.   When  characters  are  supplied, the expression expands to each
+       character lexicographically between _x and _y, inclusive, using  the  de-
+       fault C locale.  Note that both _x and _y must be of the same type.  When
+       the increment is supplied, it is used as the  difference  between  each
+       term.  The default increment is 1 or -1 as appropriate.
+
+       Brace expansion is performed before any other expansions, and any char-
+       acters special to other expansions are preserved in the result.  It  is
+       strictly  textual.  BBaasshh does not apply any syntactic interpretation to
+       the context of the expansion or the text between the braces.
+
+       A correctly-formed brace expansion must contain  unquoted  opening  and
+       closing braces, and at least one unquoted comma or a valid sequence ex-
+       pression.  Any incorrectly formed brace expansion is left unchanged.  A
+       {{  or  ,, may be quoted with a backslash to prevent its being considered
+       part of a brace expression.  To avoid conflicts with  parameter  expan-
+       sion, the string $${{ is not considered eligible for brace expansion, and
+       inhibits brace expansion until the closing }}.
+
+       This construct is typically used as shorthand when the common prefix of
+       the strings to be generated is longer than in the above example:
+
+              mkdir /usr/local/src/bash/{old,new,dist,bugs}
+       or
+              chown root /usr/{ucb/{ex,edit},lib/{ex?.?*,how_ex}}
+
+       Brace  expansion  introduces  a  slight incompatibility with historical
+       versions of sshh.  sshh does not treat opening or closing braces  specially
+       when  they  appear as part of a word, and preserves them in the output.
+       BBaasshh removes braces from words as a  consequence  of  brace  expansion.
+       For  example,  a word entered to sshh as _f_i_l_e_{_1_,_2_} appears identically in
+       the output.  The same word is output as _f_i_l_e_1 _f_i_l_e_2 after expansion  by
+       bbaasshh.   If strict compatibility with sshh is desired, start bbaasshh with the
+       ++BB option or disable brace expansion with the ++BB option to the sseett com-
+       mand (see SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS below).
+
+   TTiillddee EExxppaannssiioonn
+       If  a  word  begins  with an unquoted tilde character (`~~'), all of the
+       characters preceding the first unquoted slash (or  all  characters,  if
+       there  is no unquoted slash) are considered a _t_i_l_d_e_-_p_r_e_f_i_x.  If none of
+       the characters in the tilde-prefix are quoted, the  characters  in  the
+       tilde-prefix  following the tilde are treated as a possible _l_o_g_i_n _n_a_m_e.
+       If this login name is the null string, the tilde is replaced  with  the
+       value  of  the shell parameter HHOOMMEE.  If HHOOMMEE is unset, the home direc-
+       tory of the user executing the shell is  substituted  instead.   Other-
+       wise,  the  tilde-prefix is replaced with the home directory associated
+       with the specified login name.
+
+       If the tilde-prefix is a `~+', the value of the shell variable PPWWDD  re-
+       places  the  tilde-prefix.  If the tilde-prefix is a `~-', the value of
+       the shell variable OOLLDDPPWWDD, if it is set, is substituted.  If the  char-
+       acters  following  the tilde in the tilde-prefix consist of a number _N,
+       optionally prefixed by a `+' or a `-',  the  tilde-prefix  is  replaced
+       with the corresponding element from the directory stack, as it would be
+       displayed by the ddiirrss builtin invoked with the tilde-prefix as an argu-
+       ment.   If  the characters following the tilde in the tilde-prefix con-
+       sist of a number without a leading `+' or `-', `+' is assumed.
+
+       If the login name is invalid, or the tilde expansion fails, the word is
+       unchanged.
+
+       Each variable assignment is checked for unquoted tilde-prefixes immedi-
+       ately following a :: or the first ==.  In these cases, tilde expansion is
+       also performed.  Consequently, one may use filenames with tildes in as-
+       signments to PPAATTHH, MMAAIILLPPAATTHH, and CCDDPPAATTHH, and the shell assigns the  ex-
+       panded value.
+
+       Bash  also  performs tilde expansion on words satisfying the conditions
+       of variable assignments (as described above under PPAARRAAMMEETTEERRSS) when they
+       appear  as arguments to simple commands.  Bash does not do this, except
+       for the _d_e_c_l_a_r_a_t_i_o_n commands listed above, when in _p_o_s_i_x _m_o_d_e.
+
+   PPaarraammeetteerr EExxppaannssiioonn
+       The `$$' character introduces parameter expansion, command substitution,
+       or  arithmetic  expansion.  The parameter name or symbol to be expanded
+       may be enclosed in braces, which are optional but serve to protect  the
+       variable  to be expanded from characters immediately following it which
+       could be interpreted as part of the name.
+
+       When braces are used, the matching ending brace is the  first  `}}'  not
+       escaped by a backslash or within a quoted string, and not within an em-
+       bedded arithmetic expansion, command substitution, or parameter  expan-
+       sion.
+
+       ${_p_a_r_a_m_e_t_e_r}
+              The  value of _p_a_r_a_m_e_t_e_r is substituted.  The braces are required
+              when _p_a_r_a_m_e_t_e_r is a positional  parameter  with  more  than  one
+              digit, or when _p_a_r_a_m_e_t_e_r is followed by a character which is not
+              to be interpreted as part of its name.  The _p_a_r_a_m_e_t_e_r is a shell
+              parameter  as  described above PPAARRAAMMEETTEERRSS) or an array reference
+              (AArrrraayyss).
+
+       If the first character of _p_a_r_a_m_e_t_e_r is an exclamation  point  (!!),  and
+       _p_a_r_a_m_e_t_e_r is not a _n_a_m_e_r_e_f, it introduces a level of indirection.  BBaasshh
+       uses the value formed by expanding the rest of _p_a_r_a_m_e_t_e_r as the new _p_a_-
+       _r_a_m_e_t_e_r;  this  is  then expanded and that value is used in the rest of
+       the expansion, rather than the expansion  of  the  original  _p_a_r_a_m_e_t_e_r.
+       This is known as _i_n_d_i_r_e_c_t _e_x_p_a_n_s_i_o_n.  The value is subject to tilde ex-
+       pansion, parameter expansion, command substitution, and arithmetic  ex-
+       pansion.   If  _p_a_r_a_m_e_t_e_r  is a nameref, this expands to the name of the
+       parameter referenced by _p_a_r_a_m_e_t_e_r instead of  performing  the  complete
+       indirect  expansion.   The  exceptions  to  this  are the expansions of
+       ${!!_p_r_e_f_i_x**} and ${!!_n_a_m_e[_@]} described  below.   The  exclamation  point
+       must  immediately  follow the left brace in order to introduce indirec-
+       tion.
+
+       In each of the cases below, _w_o_r_d is subject to tilde expansion, parame-
+       ter expansion, command substitution, and arithmetic expansion.
+
+       When not performing substring expansion, using the forms documented be-
+       low (e.g., ::--), bbaasshh tests for a  parameter  that  is  unset  or  null.
+       Omitting  the  colon results in a test only for a parameter that is un-
+       set.
+
+       ${_p_a_r_a_m_e_t_e_r::--_w_o_r_d}
+              UUssee DDeeffaauulltt VVaalluueess.  If _p_a_r_a_m_e_t_e_r is unset or null,  the  expan-
+              sion  of _w_o_r_d is substituted.  Otherwise, the value of _p_a_r_a_m_e_t_e_r
+              is substituted.
+       ${_p_a_r_a_m_e_t_e_r::==_w_o_r_d}
+              AAssssiiggnn DDeeffaauulltt VVaalluueess.  If _p_a_r_a_m_e_t_e_r is unset or null,  the  ex-
+              pansion  of _w_o_r_d is assigned to _p_a_r_a_m_e_t_e_r.  The value of _p_a_r_a_m_e_-
+              _t_e_r is then substituted.  Positional parameters and special  pa-
+              rameters may not be assigned to in this way.
+       ${_p_a_r_a_m_e_t_e_r::??_w_o_r_d}
+              DDiissppllaayy  EErrrroorr iiff NNuullll oorr UUnnsseett.  If _p_a_r_a_m_e_t_e_r is null or unset,
+              the expansion of _w_o_r_d (or a message to that effect  if  _w_o_r_d  is
+              not  present) is written to the standard error and the shell, if
+              it is not interactive, exits.  Otherwise, the value of _p_a_r_a_m_e_t_e_r
+              is substituted.
+       ${_p_a_r_a_m_e_t_e_r::++_w_o_r_d}
+              UUssee  AAlltteerrnnaattee VVaalluuee.  If _p_a_r_a_m_e_t_e_r is null or unset, nothing is
+              substituted, otherwise the expansion of _w_o_r_d is substituted.
+       ${_p_a_r_a_m_e_t_e_r::_o_f_f_s_e_t}
+       ${_p_a_r_a_m_e_t_e_r::_o_f_f_s_e_t::_l_e_n_g_t_h}
+              SSuubbssttrriinngg EExxppaannssiioonn.  Expands to up to _l_e_n_g_t_h characters of  the
+              value  of  _p_a_r_a_m_e_t_e_r starting at the character specified by _o_f_f_-
+              _s_e_t.  If _p_a_r_a_m_e_t_e_r is @@, an indexed array subscripted by @@ or **,
+              or  an  associative  array name, the results differ as described
+              below.  If _l_e_n_g_t_h is omitted, expands to the  substring  of  the
+              value of _p_a_r_a_m_e_t_e_r starting at the character specified by _o_f_f_s_e_t
+              and extending to the end of the value.  _l_e_n_g_t_h  and  _o_f_f_s_e_t  are
+              arithmetic expressions (see AARRIITTHHMMEETTIICC EEVVAALLUUAATTIIOONN below).
+
+              If  _o_f_f_s_e_t  evaluates  to  a number less than zero, the value is
+              used as an offset in characters from the end of the value of _p_a_-
+              _r_a_m_e_t_e_r.   If _l_e_n_g_t_h evaluates to a number less than zero, it is
+              interpreted as an offset in characters from the end of the value
+              of  _p_a_r_a_m_e_t_e_r rather than a number of characters, and the expan-
+              sion is the characters between _o_f_f_s_e_t  and  that  result.   Note
+              that  a  negative  offset must be separated from the colon by at
+              least one space to avoid being confused with the ::-- expansion.
+
+              If _p_a_r_a_m_e_t_e_r is @@, the result is  _l_e_n_g_t_h  positional  parameters
+              beginning at _o_f_f_s_e_t.  A negative _o_f_f_s_e_t is taken relative to one
+              greater than the greatest positional parameter, so an offset  of
+              -1  evaluates to the last positional parameter.  It is an expan-
+              sion error if _l_e_n_g_t_h evaluates to a number less than zero.
+
+              If _p_a_r_a_m_e_t_e_r is an indexed array name subscripted by @ or *, the
+              result  is  the _l_e_n_g_t_h members of the array beginning with ${_p_a_-
+              _r_a_m_e_t_e_r[_o_f_f_s_e_t]}.  A negative _o_f_f_s_e_t is taken  relative  to  one
+              greater than the maximum index of the specified array.  It is an
+              expansion error if _l_e_n_g_t_h evaluates to a number less than zero.
+
+              Substring expansion applied to an associative array produces un-
+              defined results.
+
+              Substring  indexing  is zero-based unless the positional parame-
+              ters are used, in which case the indexing starts  at  1  by  de-
+              fault.   If _o_f_f_s_e_t is 0, and the positional parameters are used,
+              $$00 is prefixed to the list.
+
+       ${!!_p_r_e_f_i_x**}
+       ${!!_p_r_e_f_i_x@@}
+              NNaammeess mmaattcchhiinngg pprreeffiixx.  Expands to the names of variables  whose
+              names begin with _p_r_e_f_i_x, separated by the first character of the
+              IIFFSS special variable.  When _@ is used and the expansion  appears
+              within  double  quotes, each variable name expands to a separate
+              word.
+
+       ${!!_n_a_m_e[_@]}
+       ${!!_n_a_m_e[_*]}
+              LLiisstt ooff aarrrraayy kkeeyyss.  If _n_a_m_e is an array  variable,  expands  to
+              the  list  of array indices (keys) assigned in _n_a_m_e.  If _n_a_m_e is
+              not an array, expands to 0 if _n_a_m_e is set  and  null  otherwise.
+              When  _@  is used and the expansion appears within double quotes,
+              each key expands to a separate word.
+
+       ${##_p_a_r_a_m_e_t_e_r}
+              PPaarraammeetteerr lleennggtthh.  The length in characters of the value of  _p_a_-
+              _r_a_m_e_t_e_r  is substituted.  If _p_a_r_a_m_e_t_e_r is ** or @@, the value sub-
+              stituted is the number of positional parameters.   If  _p_a_r_a_m_e_t_e_r
+              is an array name subscripted by ** or @@, the value substituted is
+              the number of elements in the array.  If _p_a_r_a_m_e_t_e_r is an indexed
+              array  name subscripted by a negative number, that number is in-
+              terpreted as relative to one greater than the maximum  index  of
+              _p_a_r_a_m_e_t_e_r,  so  negative  indices count back from the end of the
+              array, and an index of -1 references the last element.
+
+       ${_p_a_r_a_m_e_t_e_r##_w_o_r_d}
+       ${_p_a_r_a_m_e_t_e_r####_w_o_r_d}
+              RReemmoovvee mmaattcchhiinngg pprreeffiixx ppaatttteerrnn.  The _w_o_r_d is expanded to produce
+              a pattern just as in pathname expansion, and matched against the
+              expanded value of _p_a_r_a_m_e_t_e_r using the rules described under PPaatt--
+              tteerrnn  MMaattcchhiinngg  below.   If the pattern matches the beginning of
+              the value of _p_a_r_a_m_e_t_e_r, then the result of the expansion is  the
+              expanded  value  of _p_a_r_a_m_e_t_e_r with the shortest matching pattern
+              (the ``##'' case) or the longest  matching  pattern  (the  ``####''
+              case)  deleted.  If _p_a_r_a_m_e_t_e_r is @@ or **, the pattern removal op-
+              eration is applied to each positional parameter in turn, and the
+              expansion is the resultant list.  If _p_a_r_a_m_e_t_e_r is an array vari-
+              able subscripted with @@ or **, the pattern removal  operation  is
+              applied  to  each member of the array in turn, and the expansion
+              is the resultant list.
+
+       ${_p_a_r_a_m_e_t_e_r%%_w_o_r_d}
+       ${_p_a_r_a_m_e_t_e_r%%%%_w_o_r_d}
+              RReemmoovvee mmaattcchhiinngg ssuuffffiixx ppaatttteerrnn.  The _w_o_r_d is expanded to produce
+              a pattern just as in pathname expansion, and matched against the
+              expanded value of _p_a_r_a_m_e_t_e_r using the rules described under PPaatt--
+              tteerrnn  MMaattcchhiinngg below.  If the pattern matches a trailing portion
+              of the expanded value of _p_a_r_a_m_e_t_e_r, then the result of  the  ex-
+              pansion  is  the  expanded  value of _p_a_r_a_m_e_t_e_r with the shortest
+              matching pattern (the ``%%'' case) or the longest  matching  pat-
+              tern  (the  ``%%%%''  case)  deleted.  If _p_a_r_a_m_e_t_e_r is @@ or **, the
+              pattern removal operation is applied to each positional  parame-
+              ter in turn, and the expansion is the resultant list.  If _p_a_r_a_m_-
+              _e_t_e_r is an array variable subscripted with @@ or **,  the  pattern
+              removal  operation  is  applied  to  each member of the array in
+              turn, and the expansion is the resultant list.
+
+       ${_p_a_r_a_m_e_t_e_r//_p_a_t_t_e_r_n//_s_t_r_i_n_g}
+              PPaatttteerrnn ssuubbssttiittuuttiioonn.  The _p_a_t_t_e_r_n is expanded to produce a pat-
+              tern  just  as  in pathname expansion, _P_a_r_a_m_e_t_e_r is expanded and
+              the longest match of _p_a_t_t_e_r_n against its value is replaced  with
+              _s_t_r_i_n_g.   The match is performed using the rules described under
+              PPaatttteerrnn MMaattcchhiinngg below.  If _p_a_t_t_e_r_n begins with //,  all  matches
+              of  _p_a_t_t_e_r_n  are  replaced with _s_t_r_i_n_g.  Normally only the first
+              match is replaced.  If _p_a_t_t_e_r_n begins with ##, it must  match  at
+              the  beginning  of  the expanded value of _p_a_r_a_m_e_t_e_r.  If _p_a_t_t_e_r_n
+              begins with %%, it must match at the end of the expanded value of
+              _p_a_r_a_m_e_t_e_r.   If  _s_t_r_i_n_g  is null, matches of _p_a_t_t_e_r_n are deleted
+              and the // following _p_a_t_t_e_r_n may be omitted.  If the  nnooccaasseemmaattcchh
+              shell  option  is enabled, the match is performed without regard
+              to the case of alphabetic characters.  If _p_a_r_a_m_e_t_e_r is @@  or  **,
+              the substitution operation is applied to each positional parame-
+              ter in turn, and the expansion is the resultant list.  If _p_a_r_a_m_-
+              _e_t_e_r is an array variable subscripted with @@ or **, the substitu-
+              tion operation is applied to each member of the array  in  turn,
+              and the expansion is the resultant list.
+
+       ${_p_a_r_a_m_e_t_e_r^^_p_a_t_t_e_r_n}
+       ${_p_a_r_a_m_e_t_e_r^^^^_p_a_t_t_e_r_n}
+       ${_p_a_r_a_m_e_t_e_r,,_p_a_t_t_e_r_n}
+       ${_p_a_r_a_m_e_t_e_r,,,,_p_a_t_t_e_r_n}
+              CCaassee  mmooddiiffiiccaattiioonn.   This expansion modifies the case of alpha-
+              betic characters in _p_a_r_a_m_e_t_e_r.  The _p_a_t_t_e_r_n is expanded to  pro-
+              duce a pattern just as in pathname expansion.  Each character in
+              the expanded value of _p_a_r_a_m_e_t_e_r is tested against _p_a_t_t_e_r_n,  and,
+              if  it  matches the pattern, its case is converted.  The pattern
+              should not attempt to match more than one character.  The ^^  op-
+              erator converts lowercase letters matching _p_a_t_t_e_r_n to uppercase;
+              the ,, operator converts matching uppercase letters to lowercase.
+              The  ^^^^  and ,,,, expansions convert each matched character in the
+              expanded value; the ^^ and ,, expansions match  and  convert  only
+              the  first character in the expanded value.  If _p_a_t_t_e_r_n is omit-
+              ted, it is treated like a ??, which matches every character.   If
+              _p_a_r_a_m_e_t_e_r  is @@ or **, the case modification operation is applied
+              to each positional parameter in turn, and the expansion  is  the
+              resultant  list.   If _p_a_r_a_m_e_t_e_r is an array variable subscripted
+              with @@ or **, the case modification operation is applied to  each
+              member  of the array in turn, and the expansion is the resultant
+              list.
+
+       ${_p_a_r_a_m_e_t_e_r@@_o_p_e_r_a_t_o_r}
+              PPaarraammeetteerr ttrraannssffoorrmmaattiioonn.  The expansion is either a transforma-
+              tion  of  the  value of _p_a_r_a_m_e_t_e_r or information about _p_a_r_a_m_e_t_e_r
+              itself, depending on the value of _o_p_e_r_a_t_o_r.  Each _o_p_e_r_a_t_o_r is  a
+              single letter:
+
+              UU      The  expansion is a string that is the value of _p_a_r_a_m_e_t_e_r
+                     with lowercase alphabetic characters converted to  upper-
+                     case.
+              uu      The  expansion is a string that is the value of _p_a_r_a_m_e_t_e_r
+                     with the first character converted to uppercase, if it is
+                     alphabetic.
+              LL      The  expansion is a string that is the value of _p_a_r_a_m_e_t_e_r
+                     with uppercase alphabetic characters converted to  lower-
+                     case.
+              QQ      The  expansion is a string that is the value of _p_a_r_a_m_e_t_e_r
+                     quoted in a format that can be reused as input.
+              EE      The expansion is a string that is the value of  _p_a_r_a_m_e_t_e_r
+                     with  backslash  escape  sequences  expanded  as with the
+                     $$''......'' quoting mechanism.
+              PP      The expansion is a string that is the result of expanding
+                     the value of _p_a_r_a_m_e_t_e_r as if it were a prompt string (see
+                     PPRROOMMPPTTIINNGG below).
+              AA      The expansion is a string in the form  of  an  assignment
+                     statement  or  ddeeccllaarree  command  that, if evaluated, will
+                     recreate _p_a_r_a_m_e_t_e_r with its attributes and value.
+              KK      Produces a possibly-quoted version of the value of _p_a_r_a_m_-
+                     _e_t_e_r, except that it prints the values of indexed and as-
+                     sociative arrays as a sequence of quoted key-value  pairs
+                     (see AArrrraayyss above).
+              aa      The  expansion is a string consisting of flag values rep-
+                     resenting _p_a_r_a_m_e_t_e_r's attributes.
+
+              If _p_a_r_a_m_e_t_e_r is @@ or **, the operation is applied to  each  posi-
+              tional  parameter  in  turn,  and the expansion is the resultant
+              list.  If _p_a_r_a_m_e_t_e_r is an array variable subscripted with  @@  or
+              **, the operation is applied to each member of the array in turn,
+              and the expansion is the resultant list.
+
+              The result of the expansion is subject  to  word  splitting  and
+              pathname expansion as described below.
+
+   CCoommmmaanndd SSuubbssttiittuuttiioonn
+       _C_o_m_m_a_n_d _s_u_b_s_t_i_t_u_t_i_o_n allows the output of a command to replace the com-
+       mand name.  There are two forms:
+
+              $$((_c_o_m_m_a_n_d))
+       or
+              ``_c_o_m_m_a_n_d``
+
+       BBaasshh performs the expansion by executing _c_o_m_m_a_n_d in a subshell environ-
+       ment and replacing the command substitution with the standard output of
+       the command, with any trailing newlines deleted.  Embedded newlines are
+       not  deleted,  but they may be removed during word splitting.  The com-
+       mand substitution $$((ccaatt _f_i_l_e)) can be replaced  by  the  equivalent  but
+       faster $$((<< _f_i_l_e)).
+
+       When  the  old-style  backquote form of substitution is used, backslash
+       retains its literal meaning except when followed by $$, ``,  or  \\.   The
+       first backquote not preceded by a backslash terminates the command sub-
+       stitution.  When using the $(_c_o_m_m_a_n_d) form, all characters between  the
+       parentheses make up the command; none are treated specially.
+
+       Command substitutions may be nested.  To nest when using the backquoted
+       form, escape the inner backquotes with backslashes.
+
+       If the substitution appears within double quotes,  word  splitting  and
+       pathname expansion are not performed on the results.
+
+   AArriitthhmmeettiicc EExxppaannssiioonn
+       Arithmetic  expansion allows the evaluation of an arithmetic expression
+       and the substitution of the result.  The format for  arithmetic  expan-
+       sion is:
+
+              $$((((_e_x_p_r_e_s_s_i_o_n))))
+
+       The  _e_x_p_r_e_s_s_i_o_n  is  treated  as if it were within double quotes, but a
+       double quote inside the parentheses is not treated specially.  All  to-
+       kens  in  the expression undergo parameter and variable expansion, com-
+       mand substitution, and quote removal.  The result  is  treated  as  the
+       arithmetic  expression  to  be evaluated.  Arithmetic expansions may be
+       nested.
+
+       The evaluation is performed according to the rules listed  below  under
+       AARRIITTHHMMEETTIICC EEVVAALLUUAATTIIOONN.  If _e_x_p_r_e_s_s_i_o_n is invalid, bbaasshh prints a message
+       indicating failure and no substitution occurs.
+
+   PPrroocceessss SSuubbssttiittuuttiioonn
+       _P_r_o_c_e_s_s _s_u_b_s_t_i_t_u_t_i_o_n allows a process's input or output to be  referred
+       to  using  a  filename.   It takes the form of <<((_l_i_s_t)) or >>((_l_i_s_t)).  The
+       process _l_i_s_t is run asynchronously, and its input or output appears  as
+       a filename.  This filename is passed as an argument to the current com-
+       mand as the result of the expansion.  If  the  >>((_l_i_s_t))  form  is  used,
+       writing  to  the file will provide input for _l_i_s_t.  If the <<((_l_i_s_t)) form
+       is used, the file passed as an argument should be read  to  obtain  the
+       output of _l_i_s_t.  Process substitution is supported on systems that sup-
+       port named pipes (_F_I_F_O_s) or the //ddeevv//ffdd method of naming open files.
+
+       When available, process substitution is performed  simultaneously  with
+       parameter  and variable expansion, command substitution, and arithmetic
+       expansion.
+
+   WWoorrdd SSpplliittttiinngg
+       The shell scans the results of parameter expansion,  command  substitu-
+       tion,  and arithmetic expansion that did not occur within double quotes
+       for _w_o_r_d _s_p_l_i_t_t_i_n_g.
+
+       The shell treats each character of IIFFSS as a delimiter, and  splits  the
+       results  of  the  other expansions into words using these characters as
+       field  terminators.   If  IIFFSS  is  unset,  or  its  value  is   exactly
+       <<ssppaaccee>><<ttaabb>><<nneewwlliinnee>>,  the  default, then sequences of <<ssppaaccee>>, <<ttaabb>>,
+       and <<nneewwlliinnee>> at the beginning and end of the results of  the  previous
+       expansions  are  ignored, and any sequence of IIFFSS characters not at the
+       beginning or end serves to delimit words.  If IIFFSS  has  a  value  other
+       than  the  default,  then sequences of the whitespace characters ssppaaccee,
+       ttaabb, and nneewwlliinnee are ignored at the beginning and end of the  word,  as
+       long  as the whitespace character is in the value of IIFFSS (an IIFFSS white-
+       space character).  Any character in IIFFSS that  is  not  IIFFSS  whitespace,
+       along with any adjacent IIFFSS whitespace characters, delimits a field.  A
+       sequence of IIFFSS whitespace characters is also treated as  a  delimiter.
+       If the value of IIFFSS is null, no word splitting occurs.
+
+       Explicit  null arguments ("""" or '''') are retained and passed to commands
+       as empty strings.  Unquoted implicit null arguments, resulting from the
+       expansion of parameters that have no values, are removed.  If a parame-
+       ter with no value is expanded within double quotes, a null argument re-
+       sults and is retained and passed to a command as an empty string.  When
+       a quoted null argument appears as part of a  word  whose  expansion  is
+       non-null, the null argument is removed.  That is, the word -d'' becomes
+       -d after word splitting and null argument removal.
+
+       Note that if no expansion occurs, no splitting is performed.
+
+   PPaatthhnnaammee EExxppaannssiioonn
+       After word splitting, unless the --ff option has  been  set,  bbaasshh  scans
+       each  word  for the characters **, ??, and [[.  If one of these characters
+       appears, and is not quoted, then the word is regarded as a _p_a_t_t_e_r_n, and
+       replaced  with  an alphabetically sorted list of filenames matching the
+       pattern (see PPaatttteerrnn MMaattcchhiinngg below).  If  no  matching  filenames  are
+       found,  and  the shell option nnuullllgglloobb is not enabled, the word is left
+       unchanged.  If the nnuullllgglloobb option is set, and no  matches  are  found,
+       the  word  is  removed.   If  the  ffaaiillgglloobb shell option is set, and no
+       matches are found, an error message is printed and the command  is  not
+       executed.  If the shell option nnooccaasseegglloobb is enabled, the match is per-
+       formed without regard to the case of  alphabetic  characters.   When  a
+       pattern  is  used  for  pathname expansion, the character ````..''''  at the
+       start of a name or immediately following a slash must  be  matched  ex-
+       plicitly,  unless the shell option ddoottgglloobb is set.  The filenames ````..''''
+       and ````....''''  must always be matched explicitly, even if ddoottgglloobb is  set.
+       In  other  cases,  the ````..''''  character is not treated specially.  When
+       matching a pathname, the slash character must always be matched explic-
+       itly  by  a slash in the pattern, but in other matching contexts it can
+       be matched by a special pattern character as described below under PPaatt--
+       tteerrnn  MMaattcchhiinngg.  See the description of sshhoopptt below under SSHHEELLLL BBUUIILLTTIINN
+       CCOOMMMMAANNDDSS for a description of the nnooccaasseegglloobb, nnuullllgglloobb,  ffaaiillgglloobb,  and
+       ddoottgglloobb shell options.
+
+       The  GGLLOOBBIIGGNNOORREE  shell variable may be used to restrict the set of file
+       names matching a _p_a_t_t_e_r_n.  If GGLLOOBBIIGGNNOORREE is  set,  each  matching  file
+       name  that  also  matches  one of the patterns in GGLLOOBBIIGGNNOORREE is removed
+       from the list of matches.  If the nnooccaasseegglloobb option is set, the  match-
+       ing  against  the patterns in GGLLOOBBIIGGNNOORREE is performed without regard to
+       case.  The filenames ````..''''  and ````....''''  are always ignored when GGLLOOBBIIGG--
+       NNOORREE  is  set  and not null.  However, setting GGLLOOBBIIGGNNOORREE to a non-null
+       value has the effect of enabling the ddoottgglloobb shell option, so all other
+       filenames  beginning with a ````..''''  will match.  To get the old behavior
+       of ignoring filenames beginning with a ````..'''', make ````..**''''  one  of  the
+       patterns in GGLLOOBBIIGGNNOORREE.  The ddoottgglloobb option is disabled when GGLLOOBBIIGGNNOORREE
+       is unset.  The pattern matching honors the setting of the eexxttgglloobb shell
+       option.
+
+       PPaatttteerrnn MMaattcchhiinngg
+
+       Any character that appears in a pattern, other than the special pattern
+       characters described below, matches itself.  The NUL character may  not
+       occur  in  a pattern.  A backslash escapes the following character; the
+       escaping backslash is discarded when  matching.   The  special  pattern
+       characters must be quoted if they are to be matched literally.
+
+       The special pattern characters have the following meanings:
+
+              **      Matches  any string, including the null string.  When the
+                     gglloobbssttaarr shell option is enabled, and  **  is  used  in  a
+                     pathname  expansion  context,  two  adjacent **s used as a
+                     single pattern will match all files and zero or more  di-
+                     rectories  and  subdirectories.   If followed by a //, two
+                     adjacent **s will match only directories  and  subdirecto-
+                     ries.
+              ??      Matches any single character.
+              [[......]]  Matches  any  one  of the enclosed characters.  A pair of
+                     characters separated by a hyphen denotes a _r_a_n_g_e  _e_x_p_r_e_s_-
+                     _s_i_o_n;  any character that falls between those two charac-
+                     ters, inclusive, using the current locale's collating se-
+                     quence and character set, is matched.  If the first char-
+                     acter following the [[ is a !!  or a ^^ then  any  character
+                     not enclosed is matched.  The sorting order of characters
+                     in range expressions is determined by the current  locale
+                     and  the  values  of the LLCC__CCOOLLLLAATTEE or LLCC__AALLLL shell vari-
+                     ables, if set.  To obtain the traditional  interpretation
+                     of  range  expressions,  where  [[aa--dd]]  is  equivalent  to
+                     [[aabbccdd]], set value of the LLCC__AALLLL shell variable to  CC,  or
+                     enable  the  gglloobbaasscciiiirraannggeess  shell  option.   A -- may be
+                     matched by including it as the first or last character in
+                     the set.  A ]] may be matched by including it as the first
+                     character in the set.
+
+                     Within [[ and ]], _c_h_a_r_a_c_t_e_r _c_l_a_s_s_e_s can be specified  using
+                     the syntax [[::_c_l_a_s_s::]], where _c_l_a_s_s is one of the following
+                     classes defined in the POSIX standard:
+                     aallnnuumm aallpphhaa aasscciiii bbllaannkk ccnnttrrll  ddiiggiitt  ggrraapphh  lloowweerr  pprriinntt
+                     ppuunncctt ssppaaccee uuppppeerr wwoorrdd xxddiiggiitt
+                     A character class matches any character belonging to that
+                     class.  The wwoorrdd character class matches letters, digits,
+                     and the character _.
+
+                     Within [[ and ]], an _e_q_u_i_v_a_l_e_n_c_e _c_l_a_s_s can be specified us-
+                     ing the syntax [[==_c==]], which matches all  characters  with
+                     the  same collation weight (as defined by the current lo-
+                     cale) as the character _c.
+
+                     Within [[ and ]], the syntax [[.._s_y_m_b_o_l..]] matches the collat-
+                     ing symbol _s_y_m_b_o_l.
+
+       If the eexxttgglloobb shell option is enabled using the sshhoopptt builtin, several
+       extended pattern matching operators are recognized.  In  the  following
+       description, a _p_a_t_t_e_r_n_-_l_i_s_t is a list of one or more patterns separated
+       by a ||.  Composite patterns may be formed using one or more of the fol-
+       lowing sub-patterns:
+
+              ??((_p_a_t_t_e_r_n_-_l_i_s_t))
+                     Matches zero or one occurrence of the given patterns
+              **((_p_a_t_t_e_r_n_-_l_i_s_t))
+                     Matches zero or more occurrences of the given patterns
+              ++((_p_a_t_t_e_r_n_-_l_i_s_t))
+                     Matches one or more occurrences of the given patterns
+              @@((_p_a_t_t_e_r_n_-_l_i_s_t))
+                     Matches one of the given patterns
+              !!((_p_a_t_t_e_r_n_-_l_i_s_t))
+                     Matches anything except one of the given patterns
+
+       Complicated extended pattern matching against long strings is slow, es-
+       pecially when the patterns contain alternations and the strings contain
+       multiple  matches.   Using separate matches against shorter strings, or
+       using arrays of strings instead of a single long string, may be faster.
+
+   QQuuoottee RReemmoovvaall
+       After the preceding expansions, all unquoted occurrences of the charac-
+       ters  \\,  '', and "" that did not result from one of the above expansions
+       are removed.
+
+RREEDDIIRREECCTTIIOONN
+       Before a command is executed, its input and output  may  be  _r_e_d_i_r_e_c_t_e_d
+       using  a special notation interpreted by the shell.  Redirection allows
+       commands' file handles to be duplicated, opened, closed, made to  refer
+       to different files, and can change the files the command reads from and
+       writes to.  Redirection may also be used to modify file handles in  the
+       current  shell execution environment.  The following redirection opera-
+       tors may precede or appear anywhere within a _s_i_m_p_l_e _c_o_m_m_a_n_d or may fol-
+       low  a  _c_o_m_m_a_n_d.   Redirections are processed in the order they appear,
+       from left to right.
+
+       Each redirection that may be preceded by a file descriptor  number  may
+       instead be preceded by a word of the form {_v_a_r_n_a_m_e}.  In this case, for
+       each redirection operator except >&- and <&-, the shell will allocate a
+       file  descriptor  greater than or equal to 10 and assign it to _v_a_r_n_a_m_e.
+       If >&- or <&- is preceded by {_v_a_r_n_a_m_e}, the value  of  _v_a_r_n_a_m_e  defines
+       the  file descriptor to close.  If {_v_a_r_n_a_m_e} is supplied, the redirect-
+       ion persists beyond the scope of the command, allowing the  shell  pro-
+       grammer to manage the file descriptor himself.
+
+       In  the  following descriptions, if the file descriptor number is omit-
+       ted, and the first character of the redirection operator is <<, the  re-
+       direction  refers  to  the  standard input (file descriptor 0).  If the
+       first character of the  redirection  operator  is  >>,  the  redirection
+       refers to the standard output (file descriptor 1).
+
+       The  word  following the redirection operator in the following descrip-
+       tions, unless otherwise noted, is subjected to brace  expansion,  tilde
+       expansion,  parameter  and  variable  expansion,  command substitution,
+       arithmetic expansion,  quote  removal,  pathname  expansion,  and  word
+       splitting.  If it expands to more than one word, bbaasshh reports an error.
+
+       Note  that  the order of redirections is significant.  For example, the
+       command
+
+              ls >> dirlist 2>>&&1
+
+       directs both standard output and standard error to  the  file  _d_i_r_l_i_s_t,
+       while the command
+
+              ls 2>>&&1 >> dirlist
+
+       directs  only the standard output to file _d_i_r_l_i_s_t, because the standard
+       error was duplicated from the standard output before the standard  out-
+       put was redirected to _d_i_r_l_i_s_t.
+
+       BBaasshh handles several filenames specially when they are used in redirec-
+       tions, as described in the following table.  If the operating system on
+       which bbaasshh is running provides these special files, bash will use them;
+       otherwise it will emulate them internally with the  behavior  described
+       below.
+
+              //ddeevv//ffdd//_f_d
+                     If  _f_d  is  a valid integer, file descriptor _f_d is dupli-
+                     cated.
+              //ddeevv//ssttddiinn
+                     File descriptor 0 is duplicated.
+              //ddeevv//ssttddoouutt
+                     File descriptor 1 is duplicated.
+              //ddeevv//ssttddeerrrr
+                     File descriptor 2 is duplicated.
+              //ddeevv//ttccpp//_h_o_s_t//_p_o_r_t
+                     If _h_o_s_t is a valid hostname or Internet address, and _p_o_r_t
+                     is  an integer port number or service name, bbaasshh attempts
+                     to open the corresponding TCP socket.
+              //ddeevv//uuddpp//_h_o_s_t//_p_o_r_t
+                     If _h_o_s_t is a valid hostname or Internet address, and _p_o_r_t
+                     is  an integer port number or service name, bbaasshh attempts
+                     to open the corresponding UDP socket.
+
+       A failure to open or create a file causes the redirection to fail.
+
+       Redirections using file descriptors greater than 9 should be used  with
+       care,  as they may conflict with file descriptors the shell uses inter-
+       nally.
+
+   RReeddiirreeccttiinngg IInnppuutt
+       Redirection of input causes the file whose name results from the expan-
+       sion  of  _w_o_r_d  to  be  opened for reading on file descriptor _n, or the
+       standard input (file descriptor 0) if _n is not specified.
+
+       The general format for redirecting input is:
+
+              [_n]<<_w_o_r_d
+
+   RReeddiirreeccttiinngg OOuuttppuutt
+       Redirection of output causes the file whose name results from  the  ex-
+       pansion  of  _w_o_r_d to be opened for writing on file descriptor _n, or the
+       standard output (file descriptor 1) if _n is not specified.  If the file
+       does  not exist it is created; if it does exist it is truncated to zero
+       size.
+
+       The general format for redirecting output is:
+
+              [_n]>>_w_o_r_d
+
+       If the redirection operator is >>, and the nnoocclloobbbbeerr option to  the  sseett
+       builtin  has  been enabled, the redirection will fail if the file whose
+       name results from the expansion of _w_o_r_d exists and is a  regular  file.
+       If the redirection operator is >>||, or the redirection operator is >> and
+       the nnoocclloobbbbeerr option to the sseett builtin command is not enabled, the re-
+       direction is attempted even if the file named by _w_o_r_d exists.
+
+   AAppppeennddiinngg RReeddiirreecctteedd OOuuttppuutt
+       Redirection  of  output  in this fashion causes the file whose name re-
+       sults from the expansion of _w_o_r_d to be opened for appending on file de-
+       scriptor  _n,  or  the  standard  output (file descriptor 1) if _n is not
+       specified.  If the file does not exist it is created.
+
+       The general format for appending output is:
+
+              [_n]>>>>_w_o_r_d
+
+   RReeddiirreeccttiinngg SSttaannddaarrdd OOuuttppuutt aanndd SSttaannddaarrdd EErrrroorr
+       This construct allows both the standard output (file descriptor 1)  and
+       the  standard  error output (file descriptor 2) to be redirected to the
+       file whose name is the expansion of _w_o_r_d.
+
+       There are two formats for redirecting standard output and standard  er-
+       ror:
+
+              &&>>_w_o_r_d
+       and
+              >>&&_w_o_r_d
+
+       Of the two forms, the first is preferred.  This is semantically equiva-
+       lent to
+
+              >>_w_o_r_d 2>>&&1
+
+       When using the second form, _w_o_r_d may not expand to a number or  --.   If
+       it  does,  other  redirection operators apply (see DDuupplliiccaattiinngg FFiillee DDee--
+       ssccrriippttoorrss below) for compatibility reasons.
+
+   AAppppeennddiinngg SSttaannddaarrdd OOuuttppuutt aanndd SSttaannddaarrdd EErrrroorr
+       This construct allows both the standard output (file descriptor 1)  and
+       the  standard  error  output  (file descriptor 2) to be appended to the
+       file whose name is the expansion of _w_o_r_d.
+
+       The format for appending standard output and standard error is:
+
+              &&>>>>_w_o_r_d
+
+       This is semantically equivalent to
+
+              >>>>_w_o_r_d 2>>&&1
+
+       (see DDuupplliiccaattiinngg FFiillee DDeessccrriippttoorrss below).
+
+   HHeerree DDooccuummeennttss
+       This type of redirection instructs the shell to  read  input  from  the
+       current source until a line containing only _d_e_l_i_m_i_t_e_r (with no trailing
+       blanks) is seen.  All of the lines read up to that point are then  used
+       as  the  standard  input (or file descriptor _n if _n is specified) for a
+       command.
+
+       The format of here-documents is:
+
+              [_n]<<<<[--]_w_o_r_d
+                      _h_e_r_e_-_d_o_c_u_m_e_n_t
+              _d_e_l_i_m_i_t_e_r
+
+       No parameter and variable expansion, command  substitution,  arithmetic
+       expansion,  or pathname expansion is performed on _w_o_r_d.  If any part of
+       _w_o_r_d is quoted, the _d_e_l_i_m_i_t_e_r is the result of quote removal  on  _w_o_r_d,
+       and  the  lines  in the here-document are not expanded.  If _w_o_r_d is un-
+       quoted, all lines of the here-document are subjected to  parameter  ex-
+       pansion,  command substitution, and arithmetic expansion, the character
+       sequence \\<<nneewwlliinnee>> is ignored, and \\ must be used to quote the charac-
+       ters \\, $$, and ``.
+
+       If the redirection operator is <<<<--, then all leading tab characters are
+       stripped from input lines and the line containing _d_e_l_i_m_i_t_e_r.  This  al-
+       lows  here-documents  within  shell scripts to be indented in a natural
+       fashion.
+
+   HHeerree SSttrriinnggss
+       A variant of here documents, the format is:
+
+              [_n]<<<<<<_w_o_r_d
+
+       The _w_o_r_d undergoes tilde expansion, parameter and  variable  expansion,
+       command  substitution,  arithmetic expansion, and quote removal.  Path-
+       name expansion and word splitting are not  performed.   The  result  is
+       supplied as a single string, with a newline appended, to the command on
+       its standard input (or file descriptor _n if _n is specified).
+
+   DDuupplliiccaattiinngg FFiillee DDeessccrriippttoorrss
+       The redirection operator
+
+              [_n]<<&&_w_o_r_d
+
+       is used to duplicate input file descriptors.  If _w_o_r_d expands to one or
+       more  digits,  the file descriptor denoted by _n is made to be a copy of
+       that file descriptor.  If the digits in _w_o_r_d do not specify a file  de-
+       scriptor open for input, a redirection error occurs.  If _w_o_r_d evaluates
+       to --, file descriptor _n is closed.  If _n is not specified, the standard
+       input (file descriptor 0) is used.
+
+       The operator
+
+              [_n]>>&&_w_o_r_d
+
+       is  used  similarly  to duplicate output file descriptors.  If _n is not
+       specified, the standard output (file descriptor 1)  is  used.   If  the
+       digits  in _w_o_r_d do not specify a file descriptor open for output, a re-
+       direction error occurs.  If _w_o_r_d evaluates to --, file descriptor  _n  is
+       closed.   As  a special case, if _n is omitted, and _w_o_r_d does not expand
+       to one or more digits or --, the standard output and standard error  are
+       redirected as described previously.
+
+   MMoovviinngg FFiillee DDeessccrriippttoorrss
+       The redirection operator
+
+              [_n]<<&&_d_i_g_i_t--
+
+       moves  the  file descriptor _d_i_g_i_t to file descriptor _n, or the standard
+       input (file descriptor 0) if _n is not specified.  _d_i_g_i_t is closed after
+       being duplicated to _n.
+
+       Similarly, the redirection operator
+
+              [_n]>>&&_d_i_g_i_t--
+
+       moves  the  file descriptor _d_i_g_i_t to file descriptor _n, or the standard
+       output (file descriptor 1) if _n is not specified.
+
+   OOppeenniinngg FFiillee DDeessccrriippttoorrss ffoorr RReeaaddiinngg aanndd WWrriittiinngg
+       The redirection operator
+
+              [_n]<<>>_w_o_r_d
+
+       causes the file whose name is the expansion of _w_o_r_d to  be  opened  for
+       both  reading and writing on file descriptor _n, or on file descriptor 0
+       if _n is not specified.  If the file does not exist, it is created.
+
+AALLIIAASSEESS
+       _A_l_i_a_s_e_s allow a string to be substituted for a word when it is used  as
+       the  first  word  of  a  simple command.  The shell maintains a list of
+       aliases that may be set and unset with the aalliiaass  and  uunnaalliiaass  builtin
+       commands  (see  SSHHEELLLL  BBUUIILLTTIINN CCOOMMMMAANNDDSS below).  The first word of each
+       simple command, if unquoted, is checked to see if it has an alias.   If
+       so,  that word is replaced by the text of the alias.  The characters //,
+       $$, ``, and == and any of the shell _m_e_t_a_c_h_a_r_a_c_t_e_r_s or  quoting  characters
+       listed above may not appear in an alias name.  The replacement text may
+       contain any valid shell input,  including  shell  metacharacters.   The
+       first  word  of  the replacement text is tested for aliases, but a word
+       that is identical to an alias being expanded is not expanded  a  second
+       time.   This  means  that  one may alias llss to llss --FF, for instance, and
+       bbaasshh does not try to recursively expand the replacement text.   If  the
+       last  character  of  the  alias value is a _b_l_a_n_k, then the next command
+       word following the alias is also checked for alias expansion.
+
+       Aliases are created and listed with the aalliiaass command, and removed with
+       the uunnaalliiaass command.
+
+       There  is no mechanism for using arguments in the replacement text.  If
+       arguments are needed, a shell function should be  used  (see  FFUUNNCCTTIIOONNSS
+       below).
+
+       Aliases  are not expanded when the shell is not interactive, unless the
+       eexxppaanndd__aalliiaasseess shell option is set using sshhoopptt (see the description  of
+       sshhoopptt under SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS below).
+
+       The  rules  concerning  the  definition and use of aliases are somewhat
+       confusing.  BBaasshh always reads at least one complete line of input,  and
+       all  lines that make up a compound command, before executing any of the
+       commands on that line or the compound command.   Aliases  are  expanded
+       when  a  command is read, not when it is executed.  Therefore, an alias
+       definition appearing on the same line as another command does not  take
+       effect  until  the  next line of input is read.  The commands following
+       the alias definition on that line are not affected by  the  new  alias.
+       This  behavior  is  also an issue when functions are executed.  Aliases
+       are expanded when a function definition is read, not when the  function
+       is  executed,  because a function definition is itself a command.  As a
+       consequence, aliases defined in a function are not available until  af-
+       ter  that  function  is executed.  To be safe, always put alias defini-
+       tions on a separate line, and do not use aalliiaass in compound commands.
+
+       For almost every purpose, aliases are superseded by shell functions.
+
+FFUUNNCCTTIIOONNSS
+       A shell function, defined  as  described  above  under  SSHHEELLLL  GGRRAAMMMMAARR,
+       stores  a  series  of commands for later execution.  When the name of a
+       shell function is used as a simple command name, the list  of  commands
+       associated with that function name is executed.  Functions are executed
+       in the context of the current shell; no new process is created  to  in-
+       terpret  them  (contrast  this  with  the execution of a shell script).
+       When a function is executed, the arguments to the function  become  the
+       positional parameters during its execution.  The special parameter ## is
+       updated to reflect the change.  Special parameter 00 is unchanged.   The
+       first  element of the FFUUNNCCNNAAMMEE variable is set to the name of the func-
+       tion while the function is executing.
+
+       All other aspects of the shell execution environment are identical  be-
+       tween  a  function  and its caller with these exceptions: the DDEEBBUUGG and
+       RREETTUURRNN traps (see the description  of  the  ttrraapp  builtin  under  SSHHEELLLL
+       BBUUIILLTTIINN  CCOOMMMMAANNDDSS below) are not inherited unless the function has been
+       given the ttrraaccee attribute (see the description of the  ddeeccllaarree  builtin
+       below)  or  the --oo ffuunnccttrraaccee shell option has been enabled with the sseett
+       builtin (in which case all  functions  inherit  the  DDEEBBUUGG  and  RREETTUURRNN
+       traps),  and the EERRRR trap is not inherited unless the --oo eerrrrttrraaccee shell
+       option has been enabled.
+
+       Variables local to the function may be declared with the llooccaall  builtin
+       command.  Ordinarily, variables and their values are shared between the
+       function and its caller.  If a variable is declared  llooccaall,  the  vari-
+       able's  visible  scope  is restricted to that function and its children
+       (including the functions it calls).  Local variables "shadow" variables
+       with  the same name declared at previous scopes.  For instance, a local
+       variable declared in a function hides a global  variable  of  the  same
+       name:  references  and assignments refer to the local variable, leaving
+       the global variable unmodified.  When the function returns, the  global
+       variable is once again visible.
+
+       The  shell  uses  _d_y_n_a_m_i_c  _s_c_o_p_i_n_g  to  control a variable's visibility
+       within functions.  With dynamic scoping, visible  variables  and  their
+       values  are a result of the sequence of function calls that caused exe-
+       cution to reach the current function.  The value of a variable  that  a
+       function  sees  depends on its value within its caller, if any, whether
+       that caller is the "global" scope or another shell function.   This  is
+       also  the  value  that  a local variable declaration "shadows", and the
+       value that is restored when the function returns.
+
+       For example, if a variable _v_a_r is declared as local in function  _f_u_n_c_1,
+       and  _f_u_n_c_1  calls  another  function _f_u_n_c_2, references to _v_a_r made from
+       within _f_u_n_c_2 will resolve to the local variable _v_a_r from _f_u_n_c_1, shadow-
+       ing any global variable named _v_a_r.
+
+       The uunnsseett builtin also acts using the same dynamic scope: if a variable
+       is local to the current scope, uunnsseett will unset it; otherwise the unset
+       will  refer  to  the  variable  found in any calling scope as described
+       above.  If a variable at the current local scope is unset, it will  re-
+       main  so until it is reset in that scope or until the function returns.
+       Once the function returns, any instance of the variable at  a  previous
+       scope will become visible.  If the unset acts on a variable at a previ-
+       ous scope, any instance of a variable with  that  name  that  had  been
+       shadowed will become visible.
+
+       The  FFUUNNCCNNEESSTT  variable,  if set to a numeric value greater than 0, de-
+       fines a maximum function nesting level.  Function invocations that  ex-
+       ceed the limit cause the entire command to abort.
+
+       If  the  builtin command rreettuurrnn is executed in a function, the function
+       completes and execution resumes with the next command after  the  func-
+       tion call.  Any command associated with the RREETTUURRNN trap is executed be-
+       fore execution resumes.  When a function completes, the values  of  the
+       positional  parameters  and the special parameter ## are restored to the
+       values they had prior to the function's execution.
+
+       Function names and definitions may be listed with the --ff option to  the
+       ddeeccllaarree or ttyyppeesseett builtin commands.  The --FF option to ddeeccllaarree or ttyyppee--
+       sseett will list the function names only (and optionally the  source  file
+       and  line  number, if the eexxttddeebbuugg shell option is enabled).  Functions
+       may be exported so that subshells automatically have them defined  with
+       the  --ff  option  to  the  eexxppoorrtt builtin.  A function definition may be
+       deleted using the --ff option to the uunnsseett builtin.
+
+       Functions may be recursive.  The FFUUNNCCNNEESSTT variable may be used to limit
+       the  depth  of the function call stack and restrict the number of func-
+       tion invocations.  By default, no limit is imposed on the number of re-
+       cursive calls.
+
+AARRIITTHHMMEETTIICC EEVVAALLUUAATTIIOONN
+       The  shell allows arithmetic expressions to be evaluated, under certain
+       circumstances (see the lleett and ddeeccllaarree builtin commands,  the  ((((  com-
+       pound command, and AArriitthhmmeettiicc EExxppaannssiioonn).  Evaluation is done in fixed-
+       width integers with no check for overflow,  though  division  by  0  is
+       trapped  and  flagged as an error.  The operators and their precedence,
+       associativity, and values are the same as in the C language.  The  fol-
+       lowing list of operators is grouped into levels of equal-precedence op-
+       erators.  The levels are listed in order of decreasing precedence.
+
+       _i_d++++ _i_d----
+              variable post-increment and post-decrement
+       -- ++    unary minus and plus
+       ++++_i_d ----_i_d
+              variable pre-increment and pre-decrement
+       !! ~~    logical and bitwise negation
+       ****     exponentiation
+       ** // %%  multiplication, division, remainder
+       ++ --    addition, subtraction
+       <<<< >>>>  left and right bitwise shifts
+       <<== >>== << >>
+              comparison
+       ==== !!==  equality and inequality
+       &&      bitwise AND
+       ^^      bitwise exclusive OR
+       ||      bitwise OR
+       &&&&     logical AND
+       ||||     logical OR
+       _e_x_p_r??_e_x_p_r::_e_x_p_r
+              conditional operator
+       == **== //== %%== ++== --== <<<<== >>>>== &&== ^^== ||==
+              assignment
+       _e_x_p_r_1 ,, _e_x_p_r_2
+              comma
+
+       Shell variables are allowed as operands; parameter  expansion  is  per-
+       formed before the expression is evaluated.  Within an expression, shell
+       variables may also be referenced by name without  using  the  parameter
+       expansion  syntax.  A shell variable that is null or unset evaluates to
+       0 when referenced by name without using the parameter expansion syntax.
+       The  value  of a variable is evaluated as an arithmetic expression when
+       it is referenced, or when a variable which has been given  the  _i_n_t_e_g_e_r
+       attribute using ddeeccllaarree --ii is assigned a value.  A null value evaluates
+       to 0.  A shell variable need not have its _i_n_t_e_g_e_r attribute  turned  on
+       to be used in an expression.
+
+       Integer constants follow the C language definition, without suffixes or
+       character constants.  Constants with a leading 0 are interpreted as oc-
+       tal  numbers.  A leading 0x or 0X denotes hexadecimal.  Otherwise, num-
+       bers take the form [_b_a_s_e_#]n, where the optional _b_a_s_e is a decimal  num-
+       ber  between 2 and 64 representing the arithmetic base, and _n is a num-
+       ber in that base.  If _b_a_s_e_# is omitted, then base  10  is  used.   When
+       specifying _n, if a non-digit is required, the digits greater than 9 are
+       represented by the lowercase letters, the uppercase letters, @, and  _,
+       in  that order.  If _b_a_s_e is less than or equal to 36, lowercase and up-
+       percase letters may be used interchangeably to  represent  numbers  be-
+       tween 10 and 35.
+
+       Operators  are  evaluated  in  order of precedence.  Sub-expressions in
+       parentheses are evaluated first and may override the  precedence  rules
+       above.
+
+CCOONNDDIITTIIOONNAALL EEXXPPRREESSSSIIOONNSS
+       Conditional  expressions  are  used  by the [[[[ compound command and the
+       tteesstt and [[ builtin commands to test file attributes and perform  string
+       and  arithmetic  comparisons.   The tteesstt and [[ commands determine their
+       behavior based on the number of  arguments;  see  the  descriptions  of
+       those commands for any other command-specific actions.
+
+       Expressions  are  formed  from the following unary or binary primaries.
+       BBaasshh handles several filenames specially when they are used in  expres-
+       sions.  If the operating system on which bbaasshh is running provides these
+       special files, bash will use them; otherwise it will emulate  them  in-
+       ternally  with  this  behavior: If any _f_i_l_e argument to one of the pri-
+       maries is of the form _/_d_e_v_/_f_d_/_n, then file descriptor _n is checked.  If
+       the  _f_i_l_e  argument  to  one  of  the  primaries  is one of _/_d_e_v_/_s_t_d_i_n,
+       _/_d_e_v_/_s_t_d_o_u_t, or _/_d_e_v_/_s_t_d_e_r_r, file descriptor 0, 1, or 2,  respectively,
+       is checked.
+
+       Unless otherwise specified, primaries that operate on files follow sym-
+       bolic links and operate on the target of the link, rather than the link
+       itself.
+
+       When  used  with [[[[, the << and >> operators sort lexicographically using
+       the current locale.  The tteesstt command sorts using ASCII ordering.
+
+       --aa _f_i_l_e
+              True if _f_i_l_e exists.
+       --bb _f_i_l_e
+              True if _f_i_l_e exists and is a block special file.
+       --cc _f_i_l_e
+              True if _f_i_l_e exists and is a character special file.
+       --dd _f_i_l_e
+              True if _f_i_l_e exists and is a directory.
+       --ee _f_i_l_e
+              True if _f_i_l_e exists.
+       --ff _f_i_l_e
+              True if _f_i_l_e exists and is a regular file.
+       --gg _f_i_l_e
+              True if _f_i_l_e exists and is set-group-id.
+       --hh _f_i_l_e
+              True if _f_i_l_e exists and is a symbolic link.
+       --kk _f_i_l_e
+              True if _f_i_l_e exists and its ``sticky'' bit is set.
+       --pp _f_i_l_e
+              True if _f_i_l_e exists and is a named pipe (FIFO).
+       --rr _f_i_l_e
+              True if _f_i_l_e exists and is readable.
+       --ss _f_i_l_e
+              True if _f_i_l_e exists and has a size greater than zero.
+       --tt _f_d  True if file descriptor _f_d is open and refers to a terminal.
+       --uu _f_i_l_e
+              True if _f_i_l_e exists and its set-user-id bit is set.
+       --ww _f_i_l_e
+              True if _f_i_l_e exists and is writable.
+       --xx _f_i_l_e
+              True if _f_i_l_e exists and is executable.
+       --GG _f_i_l_e
+              True if _f_i_l_e exists and is owned by the effective group id.
+       --LL _f_i_l_e
+              True if _f_i_l_e exists and is a symbolic link.
+       --NN _f_i_l_e
+              True if _f_i_l_e exists and has been  modified  since  it  was  last
+              read.
+       --OO _f_i_l_e
+              True if _f_i_l_e exists and is owned by the effective user id.
+       --SS _f_i_l_e
+              True if _f_i_l_e exists and is a socket.
+       _f_i_l_e_1 --eeff _f_i_l_e_2
+              True  if _f_i_l_e_1 and _f_i_l_e_2 refer to the same device and inode num-
+              bers.
+       _f_i_l_e_1 -nntt _f_i_l_e_2
+              True if _f_i_l_e_1 is newer (according  to  modification  date)  than
+              _f_i_l_e_2, or if _f_i_l_e_1 exists and _f_i_l_e_2 does not.
+       _f_i_l_e_1 -oott _f_i_l_e_2
+              True  if _f_i_l_e_1 is older than _f_i_l_e_2, or if _f_i_l_e_2 exists and _f_i_l_e_1
+              does not.
+       --oo _o_p_t_n_a_m_e
+              True if the shell option _o_p_t_n_a_m_e is enabled.  See  the  list  of
+              options  under  the  description  of  the  --oo  option to the sseett
+              builtin below.
+       --vv _v_a_r_n_a_m_e
+              True if the shell variable _v_a_r_n_a_m_e is set (has been  assigned  a
+              value).
+       --RR _v_a_r_n_a_m_e
+              True  if  the shell variable _v_a_r_n_a_m_e is set and is a name refer-
+              ence.
+       --zz _s_t_r_i_n_g
+              True if the length of _s_t_r_i_n_g is zero.
+       _s_t_r_i_n_g
+       --nn _s_t_r_i_n_g
+              True if the length of _s_t_r_i_n_g is non-zero.
+
+       _s_t_r_i_n_g_1 ==== _s_t_r_i_n_g_2
+       _s_t_r_i_n_g_1 == _s_t_r_i_n_g_2
+              True if the strings are equal.  == should be used with  the  tteesstt
+              command  for  POSIX conformance.  When used with the [[[[ command,
+              this performs pattern matching as described above (CCoommppoouunndd CCoomm--
+              mmaannddss).
+
+       _s_t_r_i_n_g_1 !!== _s_t_r_i_n_g_2
+              True if the strings are not equal.
+
+       _s_t_r_i_n_g_1 << _s_t_r_i_n_g_2
+              True if _s_t_r_i_n_g_1 sorts before _s_t_r_i_n_g_2 lexicographically.
+
+       _s_t_r_i_n_g_1 >> _s_t_r_i_n_g_2
+              True if _s_t_r_i_n_g_1 sorts after _s_t_r_i_n_g_2 lexicographically.
+
+       _a_r_g_1 OOPP _a_r_g_2
+              OOPP  is one of --eeqq, --nnee, --lltt, --llee, --ggtt, or --ggee.  These arithmetic
+              binary operators return true if _a_r_g_1 is equal to, not equal  to,
+              less  than, less than or equal to, greater than, or greater than
+              or equal to _a_r_g_2, respectively.  _A_r_g_1 and _a_r_g_2 may  be  positive
+              or  negative  integers.  When used with the [[[[ command, _A_r_g_1 and
+              _A_r_g_2 are evaluated as  arithmetic  expressions  (see  AARRIITTHHMMEETTIICC
+              EEVVAALLUUAATTIIOONN above).
+
+SSIIMMPPLLEE CCOOMMMMAANNDD EEXXPPAANNSSIIOONN
+       When a simple command is executed, the shell performs the following ex-
+       pansions, assignments, and redirections, from left  to  right,  in  the
+       following order.
+
+       1.     The  words  that  the  parser has marked as variable assignments
+              (those preceding the command name) and  redirections  are  saved
+              for later processing.
+
+       2.     The  words that are not variable assignments or redirections are
+              expanded.  If any words remain after expansion, the  first  word
+              is  taken  to be the name of the command and the remaining words
+              are the arguments.
+
+       3.     Redirections are performed as described above under RREEDDIIRREECCTTIIOONN.
+
+       4.     The text after the == in each variable assignment undergoes tilde
+              expansion, parameter expansion, command substitution, arithmetic
+              expansion, and quote removal before being assigned to the  vari-
+              able.
+
+       If no command name results, the variable assignments affect the current
+       shell environment.  Otherwise, the variables are added to the  environ-
+       ment  of the executed command and do not affect the current shell envi-
+       ronment.  If any of the assignments attempts to assign  a  value  to  a
+       readonly  variable,  an error occurs, and the command exits with a non-
+       zero status.
+
+       If no command name results, redirections are performed, but do not  af-
+       fect  the  current  shell  environment.  A redirection error causes the
+       command to exit with a non-zero status.
+
+       If there is a command name left after expansion, execution proceeds  as
+       described  below.   Otherwise, the command exits.  If one of the expan-
+       sions contained a command substitution, the exit status of the  command
+       is  the  exit  status  of  the last command substitution performed.  If
+       there were no command substitutions, the command exits with a status of
+       zero.
+
+CCOOMMMMAANNDD EEXXEECCUUTTIIOONN
+       After  a  command  has been split into words, if it results in a simple
+       command and an optional list of arguments, the  following  actions  are
+       taken.
+
+       If  the  command name contains no slashes, the shell attempts to locate
+       it.  If there exists a shell function by that name,  that  function  is
+       invoked  as described above in FFUUNNCCTTIIOONNSS.  If the name does not match a
+       function, the shell searches for it in the list of shell builtins.   If
+       a match is found, that builtin is invoked.
+
+       If  the name is neither a shell function nor a builtin, and contains no
+       slashes, bbaasshh searches each element of the PPAATTHH for  a  directory  con-
+       taining an executable file by that name.  BBaasshh uses a hash table to re-
+       member the full pathnames of executable files  (see  hhaasshh  under  SSHHEELLLL
+       BBUUIILLTTIINN  CCOOMMMMAANNDDSS  below).  A full search of the directories in PPAATTHH is
+       performed only if the command is not found in the hash table.   If  the
+       search is unsuccessful, the shell searches for a defined shell function
+       named ccoommmmaanndd__nnoott__ffoouunndd__hhaannddllee.  If that function exists, it is invoked
+       in  a  separate execution environment with the original command and the
+       original command's arguments as its arguments, and the function's  exit
+       status  becomes  the exit status of that subshell.  If that function is
+       not defined, the shell prints an error message and returns an exit sta-
+       tus of 127.
+
+       If  the  search  is  successful, or if the command name contains one or
+       more slashes, the shell executes the named program in a separate execu-
+       tion environment.  Argument 0 is set to the name given, and the remain-
+       ing arguments to the command are set to the arguments given, if any.
+
+       If this execution fails because the file is not in  executable  format,
+       and  the file is not a directory, it is assumed to be a _s_h_e_l_l _s_c_r_i_p_t, a
+       file containing shell commands.  A subshell is spawned to  execute  it.
+       This  subshell  reinitializes itself, so that the effect is as if a new
+       shell had been invoked to handle the script, with  the  exception  that
+       the  locations of commands remembered by the parent (see hhaasshh below un-
+       der SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS) are retained by the child.
+
+       If the program is a file beginning with ##!!, the remainder of the  first
+       line  specifies an interpreter for the program.  The shell executes the
+       specified interpreter on operating systems that do not handle this exe-
+       cutable format themselves.  The arguments to the interpreter consist of
+       a single optional argument following the interpreter name on the  first
+       line  of  the program, followed by the name of the program, followed by
+       the command arguments, if any.
+
+CCOOMMMMAANNDD EEXXEECCUUTTIIOONN EENNVVIIRROONNMMEENNTT
+       The shell has an _e_x_e_c_u_t_i_o_n _e_n_v_i_r_o_n_m_e_n_t, which consists of  the  follow-
+       ing:
+
+       +o      open  files inherited by the shell at invocation, as modified by
+              redirections supplied to the eexxeecc builtin
+
+       +o      the current working directory as set by ccdd, ppuusshhdd, or  ppooppdd,  or
+              inherited by the shell at invocation
+
+       +o      the  file  creation  mode mask as set by uummaasskk or inherited from
+              the shell's parent
+
+       +o      current traps set by ttrraapp
+
+       +o      shell parameters that are set by variable assignment or with sseett
+              or inherited from the shell's parent in the environment
+
+       +o      shell  functions  defined during execution or inherited from the
+              shell's parent in the environment
+
+       +o      options enabled at invocation (either by default  or  with  com-
+              mand-line arguments) or by sseett
+
+       +o      options enabled by sshhoopptt
+
+       +o      shell aliases defined with aalliiaass
+
+       +o      various  process  IDs,  including  those of background jobs, the
+              value of $$$$, and the value of PPPPIIDD
+
+       When a simple command other than a builtin or shell function is  to  be
+       executed,  it  is invoked in a separate execution environment that con-
+       sists of the following.  Unless otherwise noted, the values are  inher-
+       ited from the shell.
+
+
+       +o      the  shell's  open  files,  plus any modifications and additions
+              specified by redirections to the command
+
+       +o      the current working directory
+
+       +o      the file creation mode mask
+
+       +o      shell variables and functions  marked  for  export,  along  with
+              variables exported for the command, passed in the environment
+
+       +o      traps caught by the shell are reset to the values inherited from
+              the shell's parent, and traps ignored by the shell are ignored
+
+       A command invoked  in  this  separate  environment  cannot  affect  the
+       shell's execution environment.
+
+       Command  substitution, commands grouped with parentheses, and asynchro-
+       nous commands are invoked in a subshell environment that is a duplicate
+       of the shell environment, except that traps caught by the shell are re-
+       set to the values that the shell inherited from its parent  at  invoca-
+       tion.  Builtin commands that are invoked as part of a pipeline are also
+       executed in a subshell environment.  Changes made to the subshell envi-
+       ronment cannot affect the shell's execution environment.
+
+       Subshells spawned to execute command substitutions inherit the value of
+       the --ee option from the parent shell.  When  not  in  _p_o_s_i_x  _m_o_d_e,  bbaasshh
+       clears the --ee option in such subshells.
+
+       If  a command is followed by a && and job control is not active, the de-
+       fault standard input for the command is the empty file _/_d_e_v_/_n_u_l_l.  Oth-
+       erwise,  the invoked command inherits the file descriptors of the call-
+       ing shell as modified by redirections.
+
+EENNVVIIRROONNMMEENNTT
+       When a program is invoked it is given an array of  strings  called  the
+       _e_n_v_i_r_o_n_m_e_n_t.   This  is  a  list  of  _n_a_m_e-_v_a_l_u_e  pairs,  of  the  form
+       _n_a_m_e=_v_a_l_u_e.
+
+       The shell provides several ways to manipulate the environment.  On  in-
+       vocation,  the  shell scans its own environment and creates a parameter
+       for each name found, automatically marking it for _e_x_p_o_r_t to child  pro-
+       cesses.  Executed commands inherit the environment.  The eexxppoorrtt and ddee--
+       ccllaarree --xx commands allow parameters and functions to  be  added  to  and
+       deleted from the environment.  If the value of a parameter in the envi-
+       ronment is modified, the new value becomes part of the environment, re-
+       placing  the  old.   The  environment inherited by any executed command
+       consists of the shell's initial environment, whose values may be  modi-
+       fied  in  the  shell, less any pairs removed by the uunnsseett command, plus
+       any additions via the eexxppoorrtt and ddeeccllaarree --xx commands.
+
+       The environment for any _s_i_m_p_l_e _c_o_m_m_a_n_d or  function  may  be  augmented
+       temporarily  by  prefixing  it with parameter assignments, as described
+       above in PPAARRAAMMEETTEERRSS.  These assignment statements affect only the envi-
+       ronment seen by that command.
+
+       If  the  --kk option is set (see the sseett builtin command below), then _a_l_l
+       parameter assignments are placed in the environment for a command,  not
+       just those that precede the command name.
+
+       When  bbaasshh  invokes  an  external command, the variable __ is set to the
+       full filename of the command and passed to that command in its environ-
+       ment.
+
+EEXXIITT SSTTAATTUUSS
+       The  exit  status  of  an executed command is the value returned by the
+       _w_a_i_t_p_i_d system call or equivalent function.  Exit statuses fall between
+       0  and  255, though, as explained below, the shell may use values above
+       125 specially.  Exit statuses from shell builtins and compound commands
+       are also limited to this range.  Under certain circumstances, the shell
+       will use special values to indicate specific failure modes.
+
+       For the shell's purposes, a command which exits with a zero exit status
+       has  succeeded.   An exit status of zero indicates success.  A non-zero
+       exit status indicates failure.  When a command terminates  on  a  fatal
+       signal _N, bbaasshh uses the value of 128+_N as the exit status.
+
+       If  a command is not found, the child process created to execute it re-
+       turns a status of 127.  If a command is found but  is  not  executable,
+       the return status is 126.
+
+       If a command fails because of an error during expansion or redirection,
+       the exit status is greater than zero.
+
+       Shell builtin commands return a status of 0 (_t_r_u_e) if  successful,  and
+       non-zero  (_f_a_l_s_e)  if an error occurs while they execute.  All builtins
+       return an exit status of 2 to indicate incorrect usage,  generally  in-
+       valid options or missing arguments.
+
+       BBaasshh  itself  returns the exit status of the last command executed, un-
+       less a syntax error occurs, in which case  it  exits  with  a  non-zero
+       value.  See also the eexxiitt builtin command below.
+
+SSIIGGNNAALLSS
+       When  bbaasshh  is  interactive,  in  the  absence of any traps, it ignores
+       SSIIGGTTEERRMM (so that kkiillll 00 does not kill an interactive shell), and SSIIGGIINNTT
+       is  caught and handled (so that the wwaaiitt builtin is interruptible).  In
+       all cases, bbaasshh ignores SSIIGGQQUUIITT.  If job control is in effect, bbaasshh ig-
+       nores SSIIGGTTTTIINN, SSIIGGTTTTOOUU, and SSIIGGTTSSTTPP.
+
+       Non-builtin commands run by bbaasshh have signal handlers set to the values
+       inherited by the shell from its parent.  When job control is not in ef-
+       fect,  asynchronous  commands  ignore SSIIGGIINNTT and SSIIGGQQUUIITT in addition to
+       these inherited handlers.  Commands run as a result of command  substi-
+       tution ignore the keyboard-generated job control signals SSIIGGTTTTIINN, SSIIGGTT--
+       TTOOUU, and SSIIGGTTSSTTPP.
+
+       The shell exits by default upon receipt of a SSIIGGHHUUPP.   Before  exiting,
+       an  interactive  shell  resends  the  SSIIGGHHUUPP  to  all  jobs, running or
+       stopped.  Stopped jobs are sent SSIIGGCCOONNTT to ensure that they receive the
+       SSIIGGHHUUPP.   To  prevent the shell from sending the signal to a particular
+       job, it should be removed from the jobs table with the  ddiissoowwnn  builtin
+       (see  SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS below) or marked to not receive SSIIGGHHUUPP us-
+       ing ddiissoowwnn --hh.
+
+       If the hhuuppoonneexxiitt shell option has been set with  sshhoopptt,  bbaasshh  sends  a
+       SSIIGGHHUUPP to all jobs when an interactive login shell exits.
+
+       If  bbaasshh is waiting for a command to complete and receives a signal for
+       which a trap has been set, the trap will not be executed until the com-
+       mand  completes.   When bbaasshh is waiting for an asynchronous command via
+       the wwaaiitt builtin, the reception of a signal for which a trap  has  been
+       set will cause the wwaaiitt builtin to return immediately with an exit sta-
+       tus greater than 128, immediately after which the trap is executed.
+
+JJOOBB CCOONNTTRROOLL
+       _J_o_b _c_o_n_t_r_o_l refers to the ability to selectively stop (_s_u_s_p_e_n_d) the ex-
+       ecution  of  processes and continue (_r_e_s_u_m_e) their execution at a later
+       point.  A user typically employs this facility via an  interactive  in-
+       terface  supplied  jointly  by  the  operating system kernel's terminal
+       driver and bbaasshh.
+
+       The shell associates a _j_o_b with each pipeline.  It  keeps  a  table  of
+       currently  executing  jobs,  which may be listed with the jjoobbss command.
+       When bbaasshh starts a job asynchronously (in the _b_a_c_k_g_r_o_u_n_d), it prints  a
+       line that looks like:
+
+              [1] 25647
+
+       indicating that this job is job number 1 and that the process ID of the
+       last process in the pipeline associated with this job is 25647.  All of
+       the  processes  in a single pipeline are members of the same job.  BBaasshh
+       uses the _j_o_b abstraction as the basis for job control.
+
+       To facilitate the implementation of the user interface to job  control,
+       the operating system maintains the notion of a _c_u_r_r_e_n_t _t_e_r_m_i_n_a_l _p_r_o_c_e_s_s
+       _g_r_o_u_p _I_D.  Members of this process group (processes whose process group
+       ID is equal to the current terminal process group ID) receive keyboard-
+       generated signals such as SSIIGGIINNTT.  These processes are said  to  be  in
+       the  _f_o_r_e_g_r_o_u_n_d.  _B_a_c_k_g_r_o_u_n_d processes are those whose process group ID
+       differs from the terminal's; such processes are immune to keyboard-gen-
+       erated signals.  Only foreground processes are allowed to read from or,
+       if the user so specifies with  stty  tostop,  write  to  the  terminal.
+       Background  processes  which  attempt  to read from (write to when stty
+       tostop is in effect) the terminal are sent a SSIIGGTTTTIINN  ((SSIIGGTTTTOOUU))  signal
+       by  the  kernel's  terminal  driver, which, unless caught, suspends the
+       process.
+
+       If the operating system on which bbaasshh is running supports job  control,
+       bbaasshh contains facilities to use it.  Typing the _s_u_s_p_e_n_d character (typ-
+       ically ^^ZZ, Control-Z) while a process is running causes that process to
+       be  stopped  and  returns  control to bbaasshh.  Typing the _d_e_l_a_y_e_d _s_u_s_p_e_n_d
+       character (typically ^^YY, Control-Y) causes the process  to  be  stopped
+       when it attempts to read input from the terminal, and control to be re-
+       turned to bbaasshh.  The user may then manipulate the state  of  this  job,
+       using  the  bbgg command to continue it in the background, the ffgg command
+       to continue it in the foreground, or the kkiillll command to kill it.  A ^^ZZ
+       takes effect immediately, and has the additional side effect of causing
+       pending output and typeahead to be discarded.
+
+       There are a number of ways to refer to a job in the shell.  The charac-
+       ter  %%  introduces  a job specification (_j_o_b_s_p_e_c).  Job number _n may be
+       referred to as %%nn.  A job may also be referred to using a prefix of the
+       name used to start it, or using a substring that appears in its command
+       line.  For example, %%ccee refers to a stopped job whose command name  be-
+       gins  with  ccee.  If a prefix matches more than one job, bbaasshh reports an
+       error.  Using %%??ccee, on the other hand, refers to any job containing the
+       string  ccee in its command line.  If the substring matches more than one
+       job, bbaasshh reports an error.  The symbols %%%% and %%++ refer to the shell's
+       notion  of  the _c_u_r_r_e_n_t _j_o_b, which is the last job stopped while it was
+       in the foreground or started in the background.  The _p_r_e_v_i_o_u_s  _j_o_b  may
+       be  referenced  using %%--.  If there is only a single job, %%++ and %%-- can
+       both be used to refer to that job.  In output pertaining to jobs (e.g.,
+       the output of the jjoobbss command), the current job is always flagged with
+       a ++, and the previous job with a --.  A single % (with  no  accompanying
+       job specification) also refers to the current job.
+
+       Simply  naming a job can be used to bring it into the foreground: %%11 is
+       a synonym for ````ffgg %%11'''', bringing job 1 from the  background  into  the
+       foreground.   Similarly,  ````%%11  &&''''  resumes  job  1 in the background,
+       equivalent to ````bbgg %%11''''.
+
+       The shell learns immediately whenever a job changes  state.   Normally,
+       bbaasshh waits until it is about to print a prompt before reporting changes
+       in a job's status so as to not interrupt any other output.  If  the  --bb
+       option to the sseett builtin command is enabled, bbaasshh reports such changes
+       immediately.  Any trap on SSIIGGCCHHLLDD is executed for each child  that  ex-
+       its.
+
+       If  an  attempt to exit bbaasshh is made while jobs are stopped (or, if the
+       cchheecckkjjoobbss shell option has been enabled using the sshhoopptt  builtin,  run-
+       ning), the shell prints a warning message, and, if the cchheecckkjjoobbss option
+       is enabled, lists the jobs and their statuses.  The  jjoobbss  command  may
+       then  be  used to inspect their status.  If a second attempt to exit is
+       made without an intervening command, the shell does not  print  another
+       warning, and any stopped jobs are terminated.
+
+       When  the shell is waiting for a job or process using the wwaaiitt builtin,
+       and job control is enabled, wwaaiitt  will  return  when  the  job  changes
+       state.  The --ff option causes wwaaiitt to wait until the job or process ter-
+       minates before returning.
+
+PPRROOMMPPTTIINNGG
+       When executing interactively, bbaasshh displays the primary prompt PPSS11 when
+       it  is  ready  to  read a command, and the secondary prompt PPSS22 when it
+       needs more input to complete a command.  BBaasshh  displays  PPSS00  after  it
+       reads  a  command  but  before  executing it.  BBaasshh displays PPSS44 as de-
+       scribed above before tracing each command when the  --xx  option  is  en-
+       abled.   BBaasshh allows these prompt strings to be customized by inserting
+       a number of backslash-escaped special characters that  are  decoded  as
+       follows:
+              \\aa     an ASCII bell character (07)
+              \\dd     the  date  in "Weekday Month Date" format (e.g., "Tue May
+                     26")
+              \\DD{{_f_o_r_m_a_t}}
+                     the _f_o_r_m_a_t is passed to _s_t_r_f_t_i_m_e(3) and the result is in-
+                     serted into the prompt string; an empty _f_o_r_m_a_t results in
+                     a locale-specific time representation.   The  braces  are
+                     required
+              \\ee     an ASCII escape character (033)
+              \\hh     the hostname up to the first `.'
+              \\HH     the hostname
+              \\jj     the number of jobs currently managed by the shell
+              \\ll     the basename of the shell's terminal device name
+              \\nn     newline
+              \\rr     carriage return
+              \\ss     the  name  of  the shell, the basename of $$00 (the portion
+                     following the final slash)
+              \\tt     the current time in 24-hour HH:MM:SS format
+              \\TT     the current time in 12-hour HH:MM:SS format
+              \\@@     the current time in 12-hour am/pm format
+              \\AA     the current time in 24-hour HH:MM format
+              \\uu     the username of the current user
+              \\vv     the version of bbaasshh (e.g., 2.00)
+              \\VV     the release of bbaasshh, version + patch level (e.g., 2.00.0)
+              \\ww     the current working  directory,  with  $$HHOOMMEE  abbreviated
+                     with  a tilde (uses the value of the PPRROOMMPPTT__DDIIRRTTRRIIMM vari-
+                     able)
+              \\WW     the basename of the current working directory, with $$HHOOMMEE
+                     abbreviated with a tilde
+              \\!!     the history number of this command
+              \\##     the command number of this command
+              \\$$     if the effective UID is 0, a ##, otherwise a $$
+              \\_n_n_n   the character corresponding to the octal number _n_n_n
+              \\\\     a backslash
+              \\[[     begin  a sequence of non-printing characters, which could
+                     be used to embed a terminal  control  sequence  into  the
+                     prompt
+              \\]]     end a sequence of non-printing characters
+
+       The  command  number  and the history number are usually different: the
+       history number of a command is its position in the history list,  which
+       may  include  commands  restored from the history file (see HHIISSTTOORRYY be-
+       low), while the command number is the position in the sequence of  com-
+       mands  executed  during the current shell session.  After the string is
+       decoded, it is expanded via parameter expansion, command  substitution,
+       arithmetic  expansion,  and  quote removal, subject to the value of the
+       pprroommppttvvaarrss shell option (see the description of the sshhoopptt command under
+       SSHHEELLLL  BBUUIILLTTIINN CCOOMMMMAANNDDSS below).  This can have unwanted side effects if
+       escaped portions of the string appear within  command  substitution  or
+       contain characters special to word expansion.
+
+RREEAADDLLIINNEE
+       This  is  the library that handles reading input when using an interac-
+       tive shell, unless the ----nnooeeddiittiinngg option is given at shell invocation.
+       Line editing is also used when using the --ee option to the rreeaadd builtin.
+       By default, the line editing commands are similar to those of Emacs.  A
+       vi-style line editing interface is also available.  Line editing can be
+       enabled at any time using the --oo eemmaaccss or --oo  vvii  options  to  the  sseett
+       builtin  (see  SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS below).  To turn off line editing
+       after the shell is running, use the ++oo eemmaaccss or ++oo vvii  options  to  the
+       sseett builtin.
+
+   RReeaaddlliinnee NNoottaattiioonn
+       In this section, the Emacs-style notation is used to denote keystrokes.
+       Control keys are denoted by C-_k_e_y, e.g., C-n  means  Control-N.   Simi-
+       larly,  _m_e_t_a  keys are denoted by M-_k_e_y, so M-x means Meta-X.  (On key-
+       boards without a _m_e_t_a key, M-_x means ESC _x, i.e., press the Escape  key
+       then the _x key.  This makes ESC the _m_e_t_a _p_r_e_f_i_x.  The combination M-C-_x
+       means ESC-Control-_x, or press the Escape key then hold the Control  key
+       while pressing the _x key.)
+
+       Readline commands may be given numeric _a_r_g_u_m_e_n_t_s, which normally act as
+       a repeat count.  Sometimes, however, it is the  sign  of  the  argument
+       that  is  significant.   Passing  a negative argument to a command that
+       acts in the forward direction (e.g., kkiillll--lliinnee) causes that command  to
+       act  in  a  backward direction.  Commands whose behavior with arguments
+       deviates from this are noted below.
+
+       When a command is described as _k_i_l_l_i_n_g text, the text deleted is  saved
+       for possible future retrieval (_y_a_n_k_i_n_g).  The killed text is saved in a
+       _k_i_l_l _r_i_n_g.  Consecutive kills cause the text to be accumulated into one
+       unit, which can be yanked all at once.  Commands which do not kill text
+       separate the chunks of text on the kill ring.
+
+   RReeaaddlliinnee IInniittiiaalliizzaattiioonn
+       Readline is customized by putting commands in  an  initialization  file
+       (the  _i_n_p_u_t_r_c  file).  The name of this file is taken from the value of
+       the IINNPPUUTTRRCC variable.  If that variable is unset, the default is _~_/_._i_n_-
+       _p_u_t_r_c.   If  that  file  does not exist or cannot be read, the ultimate
+       default is _/_e_t_c_/_i_n_p_u_t_r_c.  When a program which uses  the  readline  li-
+       brary  starts up, the initialization file is read, and the key bindings
+       and variables are set.  There are only a few basic  constructs  allowed
+       in  the  readline initialization file.  Blank lines are ignored.  Lines
+       beginning with a ## are comments.  Lines beginning  with  a  $$  indicate
+       conditional  constructs.   Other lines denote key bindings and variable
+       settings.
+
+       The default key-bindings may be changed with an  _i_n_p_u_t_r_c  file.   Other
+       programs that use this library may add their own commands and bindings.
+
+       For example, placing
+
+              M-Control-u: universal-argument
+       or
+              C-Meta-u: universal-argument
+       into  the _i_n_p_u_t_r_c would make M-C-u execute the readline command _u_n_i_v_e_r_-
+       _s_a_l_-_a_r_g_u_m_e_n_t.
+
+       The following symbolic character names  are  recognized:  _R_U_B_O_U_T,  _D_E_L,
+       _E_S_C, _L_F_D, _N_E_W_L_I_N_E, _R_E_T, _R_E_T_U_R_N, _S_P_C, _S_P_A_C_E, and _T_A_B.
+
+       In  addition  to  command  names, readline allows keys to be bound to a
+       string that is inserted when the key is pressed (a _m_a_c_r_o).
+
+   RReeaaddlliinnee KKeeyy BBiinnddiinnggss
+       The syntax for controlling key bindings in the _i_n_p_u_t_r_c file is  simple.
+       All  that is required is the name of the command or the text of a macro
+       and a key sequence to which it should be bound.  The name may be speci-
+       fied in one of two ways: as a symbolic key name, possibly with _M_e_t_a_- or
+       _C_o_n_t_r_o_l_- prefixes, or as a key sequence.
+
+       When using the form kkeeyynnaammee:_f_u_n_c_t_i_o_n_-_n_a_m_e or _m_a_c_r_o, _k_e_y_n_a_m_e is the name
+       of a key spelled out in English.  For example:
+
+              Control-u: universal-argument
+              Meta-Rubout: backward-kill-word
+              Control-o: "> output"
+
+       In  the above example, _C_-_u is bound to the function uunniivveerrssaall--aarrgguummeenntt,
+       _M_-_D_E_L is bound to the function bbaacckkwwaarrdd--kkiillll--wwoorrdd, and _C_-_o is bound  to
+       run  the macro expressed on the right hand side (that is, to insert the
+       text ``> output'' into the line).
+
+       In the second form, ""kkeeyysseeqq"":_f_u_n_c_t_i_o_n_-_n_a_m_e  or  _m_a_c_r_o,  kkeeyysseeqq  differs
+       from  kkeeyynnaammee above in that strings denoting an entire key sequence may
+       be specified by placing the sequence within double  quotes.   Some  GNU
+       Emacs  style  key escapes can be used, as in the following example, but
+       the symbolic character names are not recognized.
+
+              "\C-u": universal-argument
+              "\C-x\C-r": re-read-init-file
+              "\e[11~": "Function Key 1"
+
+       In this example, _C_-_u is again bound to the function uunniivveerrssaall--aarrgguummeenntt.
+       _C_-_x  _C_-_r is bound to the function rree--rreeaadd--iinniitt--ffiillee, and _E_S_C _[ _1 _1 _~ is
+       bound to insert the text ``Function Key 1''.
+
+       The full set of GNU Emacs style escape sequences is
+              \\CC--    control prefix
+              \\MM--    meta prefix
+              \\ee     an escape character
+              \\\\     backslash
+              \\""     literal "
+              \\''     literal '
+
+       In addition to the GNU Emacs style escape sequences, a  second  set  of
+       backslash escapes is available:
+              \\aa     alert (bell)
+              \\bb     backspace
+              \\dd     delete
+              \\ff     form feed
+              \\nn     newline
+              \\rr     carriage return
+              \\tt     horizontal tab
+              \\vv     vertical tab
+              \\_n_n_n   the  eight-bit  character  whose value is the octal value
+                     _n_n_n (one to three digits)
+              \\xx_H_H   the eight-bit character whose value  is  the  hexadecimal
+                     value _H_H (one or two hex digits)
+
+       When entering the text of a macro, single or double quotes must be used
+       to indicate a macro definition.  Unquoted text is assumed to be a func-
+       tion  name.   In  the macro body, the backslash escapes described above
+       are expanded.  Backslash will quote any other character  in  the  macro
+       text, including " and '.
+
+       BBaasshh  allows the current readline key bindings to be displayed or modi-
+       fied with the bbiinndd builtin command.  The editing mode may  be  switched
+       during  interactive  use by using the --oo option to the sseett builtin com-
+       mand (see SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS below).
+
+   RReeaaddlliinnee VVaarriiaabblleess
+       Readline has variables that can be used to further customize its behav-
+       ior.  A variable may be set in the _i_n_p_u_t_r_c file with a statement of the
+       form
+
+              sseett _v_a_r_i_a_b_l_e_-_n_a_m_e _v_a_l_u_e
+       or using the bbiinndd builtin command (see SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS below).
+
+       Except where noted, readline variables can take the values  OOnn  or  OOffff
+       (without  regard  to  case).   Unrecognized variable names are ignored.
+       When a variable value is read, empty or null values, "on"  (case-insen-
+       sitive), and "1" are equivalent to OOnn.  All other values are equivalent
+       to OOffff.  The variables and their default values are:
+
+       bbeellll--ssttyyllee ((aauuddiibbllee))
+              Controls what happens when readline wants to ring  the  terminal
+              bell.  If set to nnoonnee, readline never rings the bell.  If set to
+              vviissiibbllee, readline uses a visible bell if one is  available.   If
+              set to aauuddiibbllee, readline attempts to ring the terminal's bell.
+       bbiinndd--ttttyy--ssppeecciiaall--cchhaarrss ((OOnn))
+              If  set  to OOnn, readline attempts to bind the control characters
+              treated specially by the kernel's terminal driver to their read-
+              line equivalents.
+       bblliinnkk--mmaattcchhiinngg--ppaarreenn ((OOffff))
+              If set to OOnn, readline attempts to briefly move the cursor to an
+              opening parenthesis when a closing parenthesis is inserted.
+       ccoolloorreedd--ccoommpplleettiioonn--pprreeffiixx ((OOffff))
+              If set to OOnn, when listing completions,  readline  displays  the
+              common prefix of the set of possible completions using a differ-
+              ent color.  The color definitions are taken from  the  value  of
+              the LLSS__CCOOLLOORRSS environment variable.
+       ccoolloorreedd--ssttaattss ((OOffff))
+              If  set to OOnn, readline displays possible completions using dif-
+              ferent colors to indicate their file type.   The  color  defini-
+              tions  are  taken  from  the  value of the LLSS__CCOOLLOORRSS environment
+              variable.
+       ccoommmmeenntt--bbeeggiinn ((````##''''))
+              The string that is inserted  when  the  readline  iinnsseerrtt--ccoommmmeenntt
+              command is executed.  This command is bound to MM--## in emacs mode
+              and to ## in vi command mode.
+       ccoommpplleettiioonn--ddiissppllaayy--wwiiddtthh ((--11))
+              The number of screen columns used to  display  possible  matches
+              when  performing completion.  The value is ignored if it is less
+              than 0 or greater than the terminal screen width.  A value of  0
+              will  cause  matches  to be displayed one per line.  The default
+              value is -1.
+       ccoommpplleettiioonn--iiggnnoorree--ccaassee ((OOffff))
+              If set to OOnn, readline performs filename matching and completion
+              in a case-insensitive fashion.
+       ccoommpplleettiioonn--mmaapp--ccaassee ((OOffff))
+              If  set  to  OOnn, and ccoommpplleettiioonn--iiggnnoorree--ccaassee is enabled, readline
+              treats hyphens (_-) and underscores (__) as equivalent  when  per-
+              forming case-insensitive filename matching and completion.
+       ccoommpplleettiioonn--pprreeffiixx--ddiissppllaayy--lleennggtthh ((00))
+              The  length in characters of the common prefix of a list of pos-
+              sible completions that is displayed without modification.   When
+              set  to  a  value greater than zero, common prefixes longer than
+              this value are replaced with an ellipsis when displaying  possi-
+              ble completions.
+       ccoommpplleettiioonn--qquueerryy--iitteemmss ((110000))
+              This  determines when the user is queried about viewing the num-
+              ber of possible completions generated  by  the  ppoossssiibbllee--ccoommppllee--
+              ttiioonnss  command.  It may be set to any integer value greater than
+              or equal to zero.  If the  number  of  possible  completions  is
+              greater  than  or  equal to the value of this variable, readline
+              will ask whether or not the user wishes to view them;  otherwise
+              they are simply listed on the terminal.
+       ccoonnvveerrtt--mmeettaa ((OOnn))
+              If  set  to OOnn, readline will convert characters with the eighth
+              bit set to an ASCII key sequence by stripping the eighth bit and
+              prefixing  an  escape  character (in effect, using escape as the
+              _m_e_t_a _p_r_e_f_i_x).  The default is _O_n, but readline will  set  it  to
+              _O_f_f if the locale contains eight-bit characters.
+       ddiissaabbllee--ccoommpplleettiioonn ((OOffff))
+              If set to OOnn, readline will inhibit word completion.  Completion
+              characters will be inserted into the line as if  they  had  been
+              mapped to sseellff--iinnsseerrtt.
+       eecchhoo--ccoonnttrrooll--cchhaarraacctteerrss ((OOnn))
+              When  set to OOnn, on operating systems that indicate they support
+              it, readline echoes a character corresponding to a signal gener-
+              ated from the keyboard.
+       eeddiittiinngg--mmooddee ((eemmaaccss))
+              Controls whether readline begins with a set of key bindings sim-
+              ilar to _E_m_a_c_s or _v_i.  eeddiittiinngg--mmooddee can be set to either eemmaaccss or
+              vvii.
+       eemmaaccss--mmooddee--ssttrriinngg ((@@))
+              If  the  _s_h_o_w_-_m_o_d_e_-_i_n_-_p_r_o_m_p_t variable is enabled, this string is
+              displayed immediately before the last line of the primary prompt
+              when emacs editing mode is active.  The value is expanded like a
+              key binding, so the standard set of meta- and  control  prefixes
+              and  backslash escape sequences is available.  Use the \1 and \2
+              escapes to begin and end sequences of  non-printing  characters,
+              which  can be used to embed a terminal control sequence into the
+              mode string.
+       eennaabbllee--bbrraacckkeetteedd--ppaassttee ((OOnn))
+              When set to OOnn, readline will configure the terminal  in  a  way
+              that will enable it to insert each paste into the editing buffer
+              as a single string of characters, instead of treating each char-
+              acter  as  if it had been read from the keyboard.  This can pre-
+              vent pasted characters from being interpreted  as  editing  com-
+              mands.
+       eennaabbllee--kkeeyyppaadd ((OOffff))
+              When set to OOnn, readline will try to enable the application key-
+              pad when it is called.  Some systems need this to enable the ar-
+              row keys.
+       eennaabbllee--mmeettaa--kkeeyy ((OOnn))
+              When  set  to  OOnn, readline will try to enable any meta modifier
+              key the terminal claims to support when it is called.   On  many
+              terminals, the meta key is used to send eight-bit characters.
+       eexxppaanndd--ttiillddee ((OOffff))
+              If  set  to  OOnn,  tilde expansion is performed when readline at-
+              tempts word completion.
+       hhiissttoorryy--pprreesseerrvvee--ppooiinntt ((OOffff))
+              If set to OOnn, the history code attempts to place  point  at  the
+              same  location on each history line retrieved with pprreevviioouuss--hhiiss--
+              ttoorryy or nneexxtt--hhiissttoorryy.
+       hhiissttoorryy--ssiizzee ((uunnsseett))
+              Set the maximum number of history entries saved in  the  history
+              list.   If set to zero, any existing history entries are deleted
+              and no new entries are saved.  If set to a value less than zero,
+              the  number  of history entries is not limited.  By default, the
+              number of history entries is set to the value  of  the  HHIISSTTSSIIZZEE
+              shell  variable.  If an attempt is made to set _h_i_s_t_o_r_y_-_s_i_z_e to a
+              non-numeric value, the maximum number of history entries will be
+              set to 500.
+       hhoorriizzoonnttaall--ssccrroollll--mmooddee ((OOffff))
+              When  set  to  OOnn, makes readline use a single line for display,
+              scrolling the input horizontally on a single screen line when it
+              becomes  longer  than the screen width rather than wrapping to a
+              new line.  This setting is automatically enabled  for  terminals
+              of height 1.
+       iinnppuutt--mmeettaa ((OOffff))
+              If  set to OOnn, readline will enable eight-bit input (that is, it
+              will not strip the eighth bit from the characters it reads), re-
+              gardless  of  what the terminal claims it can support.  The name
+              mmeettaa--ffllaagg is a synonym for this variable.  The default  is  _O_f_f,
+              but  readline will set it to _O_n if the locale contains eight-bit
+              characters.
+       iisseeaarrcchh--tteerrmmiinnaattoorrss ((````CC--[[CC--JJ''''))
+              The string of characters that should  terminate  an  incremental
+              search  without  subsequently  executing the character as a com-
+              mand.  If this variable has not been given a value, the  charac-
+              ters _E_S_C and _C_-_J will terminate an incremental search.
+       kkeeyymmaapp ((eemmaaccss))
+              Set  the current readline keymap.  The set of valid keymap names
+              is _e_m_a_c_s_, _e_m_a_c_s_-_s_t_a_n_d_a_r_d_, _e_m_a_c_s_-_m_e_t_a_,  _e_m_a_c_s_-_c_t_l_x_,  _v_i_,  _v_i_-_c_o_m_-
+              _m_a_n_d,  and  _v_i_-_i_n_s_e_r_t.  _v_i is equivalent to _v_i_-_c_o_m_m_a_n_d; _e_m_a_c_s is
+              equivalent to _e_m_a_c_s_-_s_t_a_n_d_a_r_d.  The default value is  _e_m_a_c_s;  the
+              value of eeddiittiinngg--mmooddee also affects the default keymap.
+       kkeeyysseeqq--ttiimmeeoouutt ((550000))
+              Specifies  the  duration _r_e_a_d_l_i_n_e will wait for a character when
+              reading an ambiguous key sequence (one that can form a  complete
+              key sequence using the input read so far, or can take additional
+              input to complete a longer key sequence).  If no  input  is  re-
+              ceived  within  the  timeout,  _r_e_a_d_l_i_n_e will use the shorter but
+              complete key sequence.  The value is specified in  milliseconds,
+              so  a value of 1000 means that _r_e_a_d_l_i_n_e will wait one second for
+              additional input.  If this variable is set to a value less  than
+              or  equal to zero, or to a non-numeric value, _r_e_a_d_l_i_n_e will wait
+              until another key is pressed to decide  which  key  sequence  to
+              complete.
+       mmaarrkk--ddiirreeccttoorriieess ((OOnn))
+              If set to OOnn, completed directory names have a slash appended.
+       mmaarrkk--mmooddiiffiieedd--lliinneess ((OOffff))
+              If  set  to  OOnn,  history lines that have been modified are dis-
+              played with a preceding asterisk (**).
+       mmaarrkk--ssyymmlliinnkkeedd--ddiirreeccttoorriieess ((OOffff))
+              If set to OOnn, completed names which are symbolic links to direc-
+              tories  have  a slash appended (subject to the value of mmaarrkk--ddii--
+              rreeccttoorriieess).
+       mmaattcchh--hhiiddddeenn--ffiilleess ((OOnn))
+              This variable, when set to OOnn, causes readline  to  match  files
+              whose  names  begin  with  a  `.' (hidden files) when performing
+              filename completion.  If set to OOffff, the  leading  `.'  must  be
+              supplied by the user in the filename to be completed.
+       mmeennuu--ccoommpplleettee--ddiissppllaayy--pprreeffiixx ((OOffff))
+              If  set to OOnn, menu completion displays the common prefix of the
+              list of possible completions (which may be empty) before cycling
+              through the list.
+       oouuttppuutt--mmeettaa ((OOffff))
+              If  set  to OOnn, readline will display characters with the eighth
+              bit set directly rather than as a meta-prefixed escape sequence.
+              The default is _O_f_f, but readline will set it to _O_n if the locale
+              contains eight-bit characters.
+       ppaaggee--ccoommpplleettiioonnss ((OOnn))
+              If set to OOnn, readline uses an internal _m_o_r_e-like pager to  dis-
+              play a screenful of possible completions at a time.
+       pprriinntt--ccoommpplleettiioonnss--hhoorriizzoonnttaallllyy ((OOffff))
+              If  set  to  OOnn,  readline will display completions with matches
+              sorted horizontally in alphabetical order, rather than down  the
+              screen.
+       rreevveerrtt--aallll--aatt--nneewwlliinnee ((OOffff))
+              If  set  to  OOnn, readline will undo all changes to history lines
+              before returning when aacccceepptt--lliinnee is executed.  By default, his-
+              tory  lines  may  be  modified  and retain individual undo lists
+              across calls to rreeaaddlliinnee.
+       sshhooww--aallll--iiff--aammbbiigguuoouuss ((OOffff))
+              This alters the default behavior of  the  completion  functions.
+              If set to OOnn, words which have more than one possible completion
+              cause the matches to be listed immediately  instead  of  ringing
+              the bell.
+       sshhooww--aallll--iiff--uunnmmooddiiffiieedd ((OOffff))
+              This  alters the default behavior of the completion functions in
+              a fashion similar to sshhooww--aallll--iiff--aammbbiigguuoouuss.  If set to OOnn, words
+              which  have more than one possible completion without any possi-
+              ble partial completion (the possible completions don't  share  a
+              common  prefix)  cause  the matches to be listed immediately in-
+              stead of ringing the bell.
+       sshhooww--mmooddee--iinn--pprroommpptt ((OOffff))
+              If set to OOnn, add a string to the beginning of the prompt  indi-
+              cating  the  editing  mode:  emacs, vi command, or vi insertion.
+              The mode strings are user-settable (e.g., _e_m_a_c_s_-_m_o_d_e_-_s_t_r_i_n_g).
+       sskkiipp--ccoommpplleetteedd--tteexxtt ((OOffff))
+              If set to OOnn, this alters the default completion  behavior  when
+              inserting  a  single match into the line.  It's only active when
+              performing completion in the middle  of  a  word.   If  enabled,
+              readline  does  not  insert  characters from the completion that
+              match characters after point in the  word  being  completed,  so
+              portions of the word following the cursor are not duplicated.
+       vvii--ccmmdd--mmooddee--ssttrriinngg ((((ccmmdd))))
+              If  the  _s_h_o_w_-_m_o_d_e_-_i_n_-_p_r_o_m_p_t variable is enabled, this string is
+              displayed immediately before the last line of the primary prompt
+              when  vi  editing mode is active and in command mode.  The value
+              is expanded like a key binding, so the standard set of meta- and
+              control  prefixes  and  backslash escape sequences is available.
+              Use the \1 and \2 escapes to begin and  end  sequences  of  non-
+              printing  characters, which can be used to embed a terminal con-
+              trol sequence into the mode string.
+       vvii--iinnss--mmooddee--ssttrriinngg ((((iinnss))))
+              If the _s_h_o_w_-_m_o_d_e_-_i_n_-_p_r_o_m_p_t variable is enabled, this  string  is
+              displayed immediately before the last line of the primary prompt
+              when vi editing mode is active and in insertion mode.  The value
+              is expanded like a key binding, so the standard set of meta- and
+              control prefixes and backslash escape  sequences  is  available.
+              Use  the  \1  and  \2 escapes to begin and end sequences of non-
+              printing characters, which can be used to embed a terminal  con-
+              trol sequence into the mode string.
+       vviissiibbllee--ssttaattss ((OOffff))
+              If  set to OOnn, a character denoting a file's type as reported by
+              _s_t_a_t(2) is appended to the filename when listing  possible  com-
+              pletions.
+
+   RReeaaddlliinnee CCoonnddiittiioonnaall CCoonnssttrruuccttss
+       Readline  implements  a  facility  similar in spirit to the conditional
+       compilation features of the C preprocessor which  allows  key  bindings
+       and  variable  settings  to be performed as the result of tests.  There
+       are four parser directives used.
+
+       $$iiff    The $$iiff construct allows bindings to be made based on the  edit-
+              ing  mode,  the  terminal  being  used, or the application using
+              readline.  The text of the test, after any comparison operator,
+               extends to the end of the  line;  unless  otherwise  noted,  no
+              characters are required to isolate it.
+
+              mmooddee   The  mmooddee==  form  of  the  $$iiff  directive is used to test
+                     whether readline is in emacs or vi  mode.   This  may  be
+                     used  in conjunction with the sseett kkeeyymmaapp command, for in-
+                     stance,  to  set  bindings  in  the  _e_m_a_c_s_-_s_t_a_n_d_a_r_d   and
+                     _e_m_a_c_s_-_c_t_l_x  keymaps  only  if readline is starting out in
+                     emacs mode.
+
+              tteerrmm   The tteerrmm== form may be used to  include  terminal-specific
+                     key bindings, perhaps to bind the key sequences output by
+                     the terminal's function keys.  The word on the right side
+                     of the == is tested against both the full name of the ter-
+                     minal and the portion of the  terminal  name  before  the
+                     first  --.  This allows _s_u_n to match both _s_u_n and _s_u_n_-_c_m_d,
+                     for instance.
+
+              vveerrssiioonn
+                     The vveerrssiioonn test  may  be  used  to  perform  comparisons
+                     against  specific readline versions.  The vveerrssiioonn expands
+                     to the current readline version.  The set  of  comparison
+                     operators  includes  ==,  (and  ====), !!==, <<==, >>==, <<, and >>.
+                     The version number supplied on the right side of the  op-
+                     erator  consists  of  a major version number, an optional
+                     decimal point, and an optional minor version (e.g., 77..11).
+                     If  the  minor version is omitted, it is assumed to be 00.
+                     The operator may be separated from the string vveerrssiioonn and
+                     from the version number argument by whitespace.
+
+              aapppplliiccaattiioonn
+                     The aapppplliiccaattiioonn construct is used to include application-
+                     specific settings.  Each program using the  readline  li-
+                     brary  sets  the  _a_p_p_l_i_c_a_t_i_o_n _n_a_m_e, and an initialization
+                     file can test for a particular value.  This could be used
+                     to  bind key sequences to functions useful for a specific
+                     program.  For instance, the following command adds a  key
+                     sequence  that  quotes  the  current  or previous word in
+                     bbaasshh:
+
+                     $$iiff Bash
+                     # Quote the current or previous word
+                     "\C-xq": "\eb\"\ef\""
+                     $$eennddiiff
+
+              _v_a_r_i_a_b_l_e
+                     The _v_a_r_i_a_b_l_e construct provides simple equality tests for
+                     readline  variables and values.  The permitted comparison
+                     operators are _=, _=_=, and _!_=.  The variable name  must  be
+                     separated from the comparison operator by whitespace; the
+                     operator may be separated from the  value  on  the  right
+                     hand  side  by whitespace.  Both string and boolean vari-
+                     ables may be tested. Boolean  variables  must  be  tested
+                     against the values _o_n and _o_f_f.
+
+       $$eennddiiff This command, as seen in the previous example, terminates an $$iiff
+              command.
+
+       $$eellssee  Commands in this branch of the $$iiff directive are executed if the
+              test fails.
+
+       $$iinncclluuddee
+              This  directive takes a single filename as an argument and reads
+              commands and bindings from that file.  For example, the  follow-
+              ing directive would read _/_e_t_c_/_i_n_p_u_t_r_c:
+
+              $$iinncclluuddee  _/_e_t_c_/_i_n_p_u_t_r_c
+
+   SSeeaarrcchhiinngg
+       Readline  provides  commands  for searching through the command history
+       (see HHIISSTTOORRYY below) for lines containing a specified string.  There are
+       two search modes: _i_n_c_r_e_m_e_n_t_a_l and _n_o_n_-_i_n_c_r_e_m_e_n_t_a_l.
+
+       Incremental  searches  begin  before  the  user has finished typing the
+       search string.  As each character of the search string is typed,  read-
+       line displays the next entry from the history matching the string typed
+       so far.  An incremental search requires  only  as  many  characters  as
+       needed  to  find  the desired history entry.  The characters present in
+       the value of the iisseeaarrcchh--tteerrmmiinnaattoorrss variable are used to terminate  an
+       incremental search.  If that variable has not been assigned a value the
+       Escape and Control-J characters will terminate an  incremental  search.
+       Control-G  will  abort  an  incremental search and restore the original
+       line.  When the search is terminated, the history entry containing  the
+       search string becomes the current line.
+
+       To  find  other matching entries in the history list, type Control-S or
+       Control-R as appropriate.  This will search backward or forward in  the
+       history  for  the  next  entry matching the search string typed so far.
+       Any other key sequence bound to a readline command will  terminate  the
+       search  and  execute that command.  For instance, a _n_e_w_l_i_n_e will termi-
+       nate the search and accept the line, thereby executing the command from
+       the history list.
+
+       Readline remembers the last incremental search string.  If two Control-
+       Rs are typed without any intervening characters defining a  new  search
+       string, any remembered search string is used.
+
+       Non-incremental  searches read the entire search string before starting
+       to search for matching history lines.  The search string may  be  typed
+       by the user or be part of the contents of the current line.
+
+   RReeaaddlliinnee CCoommmmaanndd NNaammeess
+       The  following  is  a list of the names of the commands and the default
+       key sequences to which they are bound.  Command names without an accom-
+       panying key sequence are unbound by default.  In the following descrip-
+       tions, _p_o_i_n_t refers to the current cursor position, and _m_a_r_k refers  to
+       a  cursor position saved by the sseett--mmaarrkk command.  The text between the
+       point and mark is referred to as the _r_e_g_i_o_n.
+
+   CCoommmmaannddss ffoorr MMoovviinngg
+       bbeeggiinnnniinngg--ooff--lliinnee ((CC--aa))
+              Move to the start of the current line.
+       eenndd--ooff--lliinnee ((CC--ee))
+              Move to the end of the line.
+       ffoorrwwaarrdd--cchhaarr ((CC--ff))
+              Move forward a character.
+       bbaacckkwwaarrdd--cchhaarr ((CC--bb))
+              Move back a character.
+       ffoorrwwaarrdd--wwoorrdd ((MM--ff))
+              Move forward to the end of the next word.  Words are composed of
+              alphanumeric characters (letters and digits).
+       bbaacckkwwaarrdd--wwoorrdd ((MM--bb))
+              Move  back  to the start of the current or previous word.  Words
+              are composed of alphanumeric characters (letters and digits).
+       sshheellll--ffoorrwwaarrdd--wwoorrdd
+              Move forward to the end of the next word.  Words  are  delimited
+              by non-quoted shell metacharacters.
+       sshheellll--bbaacckkwwaarrdd--wwoorrdd
+              Move  back  to the start of the current or previous word.  Words
+              are delimited by non-quoted shell metacharacters.
+       pprreevviioouuss--ssccrreeeenn--lliinnee
+              Attempt to move point to the same physical screen column on  the
+              previous  physical  screen  line. This will not have the desired
+              effect if the current Readline line does not take up  more  than
+              one  physical line or if point is not greater than the length of
+              the prompt plus the screen width.
+       nneexxtt--ssccrreeeenn--lliinnee
+              Attempt to move point to the same physical screen column on  the
+              next physical screen line. This will not have the desired effect
+              if the current Readline line does not  take  up  more  than  one
+              physical  line  or if the length of the current Readline line is
+              not greater than the length of the prompt plus the screen width.
+       cclleeaarr--ddiissppllaayy ((MM--CC--ll))
+              Clear the screen and, if  possible,  the  terminal's  scrollback
+              buffer,  then  redraw the current line, leaving the current line
+              at the top of the screen.
+       cclleeaarr--ssccrreeeenn ((CC--ll))
+              Clear the screen, then redraw the current line, leaving the cur-
+              rent  line  at the top of the screen.  With an argument, refresh
+              the current line without clearing the screen.
+       rreeddrraaww--ccuurrrreenntt--lliinnee
+              Refresh the current line.
+
+   CCoommmmaannddss ffoorr MMaanniippuullaattiinngg tthhee HHiissttoorryy
+       aacccceepptt--lliinnee ((NNeewwlliinnee,, RReettuurrnn))
+              Accept the line regardless of where the cursor is.  If this line
+              is  non-empty, add it to the history list according to the state
+              of the HHIISSTTCCOONNTTRROOLL variable.  If the line is a modified  history
+              line, then restore the history line to its original state.
+       pprreevviioouuss--hhiissttoorryy ((CC--pp))
+              Fetch the previous command from the history list, moving back in
+              the list.
+       nneexxtt--hhiissttoorryy ((CC--nn))
+              Fetch the next command from the history list, moving forward  in
+              the list.
+       bbeeggiinnnniinngg--ooff--hhiissttoorryy ((MM--<<))
+              Move to the first line in the history.
+       eenndd--ooff--hhiissttoorryy ((MM-->>))
+              Move  to  the end of the input history, i.e., the line currently
+              being entered.
+       rreevveerrssee--sseeaarrcchh--hhiissttoorryy ((CC--rr))
+              Search backward starting at the current  line  and  moving  `up'
+              through  the  history  as  necessary.   This  is  an incremental
+              search.
+       ffoorrwwaarrdd--sseeaarrcchh--hhiissttoorryy ((CC--ss))
+              Search forward starting at the current line  and  moving  `down'
+              through  the  history  as  necessary.   This  is  an incremental
+              search.
+       nnoonn--iinnccrreemmeennttaall--rreevveerrssee--sseeaarrcchh--hhiissttoorryy ((MM--pp))
+              Search backward through the history starting at the current line
+              using  a  non-incremental  search  for  a string supplied by the
+              user.
+       nnoonn--iinnccrreemmeennttaall--ffoorrwwaarrdd--sseeaarrcchh--hhiissttoorryy ((MM--nn))
+              Search forward  through  the  history  using  a  non-incremental
+              search for a string supplied by the user.
+       hhiissttoorryy--sseeaarrcchh--ffoorrwwaarrdd
+              Search  forward through the history for the string of characters
+              between the start of the current line and the point.  This is  a
+              non-incremental search.
+       hhiissttoorryy--sseeaarrcchh--bbaacckkwwaarrdd
+              Search backward through the history for the string of characters
+              between the start of the current line and the point.  This is  a
+              non-incremental search.
+       hhiissttoorryy--ssuubbssttrriinngg--sseeaarrcchh--bbaacckkwwaarrdd
+              Search backward through the history for the string of characters
+              between the start of the current line and the current cursor po-
+              sition  (the  _p_o_i_n_t).  The search string may match anywhere in a
+              history line.  This is a non-incremental search.
+       hhiissttoorryy--ssuubbssttrriinngg--sseeaarrcchh--ffoorrwwaarrdd
+              Search forward through the history for the string of  characters
+              between the start of the current line and the point.  The search
+              string may match anywhere in a history line.  This is a  non-in-
+              cremental search.
+       yyaannkk--nntthh--aarrgg ((MM--CC--yy))
+              Insert  the  first argument to the previous command (usually the
+              second word on the previous line) at point.  With an argument _n,
+              insert  the _nth word from the previous command (the words in the
+              previous command begin with word 0).  A  negative  argument  in-
+              serts  the  _nth word from the end of the previous command.  Once
+              the argument _n is computed, the argument is extracted as if  the
+              "!_n" history expansion had been specified.
+       yyaannkk--llaasstt--aarrgg ((MM--..,, MM--__))
+              Insert  the last argument to the previous command (the last word
+              of the previous history entry).  With a numeric argument, behave
+              exactly  like  yyaannkk--nntthh--aarrgg.   Successive calls to yyaannkk--llaasstt--aarrgg
+              move back through the history list, inserting the last word  (or
+              the  word  specified  by the argument to the first call) of each
+              line in turn.  Any numeric argument supplied to these successive
+              calls  determines  the direction to move through the history.  A
+              negative argument switches the  direction  through  the  history
+              (back or forward).  The history expansion facilities are used to
+              extract the last word, as if the "!$" history expansion had been
+              specified.
+       sshheellll--eexxppaanndd--lliinnee ((MM--CC--ee))
+              Expand the line as the shell does.  This performs alias and his-
+              tory expansion as well as all of the shell word expansions.  See
+              HHIISSTTOORRYY EEXXPPAANNSSIIOONN below for a description of history expansion.
+       hhiissttoorryy--eexxppaanndd--lliinnee ((MM--^^))
+              Perform  history expansion on the current line.  See HHIISSTTOORRYY EEXX--
+              PPAANNSSIIOONN below for a description of history expansion.
+       mmaaggiicc--ssppaaccee
+              Perform history expansion on  the  current  line  and  insert  a
+              space.  See HHIISSTTOORRYY EEXXPPAANNSSIIOONN below for a description of history
+              expansion.
+       aalliiaass--eexxppaanndd--lliinnee
+              Perform alias expansion on the current line.  See AALLIIAASSEESS  above
+              for a description of alias expansion.
+       hhiissttoorryy--aanndd--aalliiaass--eexxppaanndd--lliinnee
+              Perform history and alias expansion on the current line.
+       iinnsseerrtt--llaasstt--aarrgguummeenntt ((MM--..,, MM--__))
+              A synonym for yyaannkk--llaasstt--aarrgg.
+       ooppeerraattee--aanndd--ggeett--nneexxtt ((CC--oo))
+              Accept  the  current  line for execution and fetch the next line
+              relative to the current line from the history  for  editing.   A
+              numeric  argument,  if  supplied, specifies the history entry to
+              use instead of the current line.
+       eeddiitt--aanndd--eexxeeccuuttee--ccoommmmaanndd ((CC--xx CC--ee))
+              Invoke an editor on the current command line,  and  execute  the
+              result as shell commands.  BBaasshh attempts to invoke $$VVIISSUUAALL, $$EEDD--
+              IITTOORR, and _e_m_a_c_s as the editor, in that order.
+
+   CCoommmmaannddss ffoorr CChhaannggiinngg TTeexxtt
+       _e_n_d_-_o_f_-_f_i_l_e ((uussuuaallllyy CC--dd))
+              The character indicating end-of-file as  set,  for  example,  by
+              ``stty''.   If  this character is read when there are no charac-
+              ters on the line, and point is at the  beginning  of  the  line,
+              Readline interprets it as the end of input and returns EEOOFF.
+       ddeelleettee--cchhaarr ((CC--dd))
+              Delete the character at point.  If this function is bound to the
+              same character as the tty EEOOFF character, as CC--dd commonly is, see
+              above for the effects.
+       bbaacckkwwaarrdd--ddeelleettee--cchhaarr ((RRuubboouutt))
+              Delete  the  character  behind the cursor.  When given a numeric
+              argument, save the deleted text on the kill ring.
+       ffoorrwwaarrdd--bbaacckkwwaarrdd--ddeelleettee--cchhaarr
+              Delete the character under the cursor, unless the cursor  is  at
+              the end of the line, in which case the character behind the cur-
+              sor is deleted.
+       qquuootteedd--iinnsseerrtt ((CC--qq,, CC--vv))
+              Add the next character typed to the line verbatim.  This is  how
+              to insert characters like CC--qq, for example.
+       ttaabb--iinnsseerrtt ((CC--vv TTAABB))
+              Insert a tab character.
+       sseellff--iinnsseerrtt ((aa,, bb,, AA,, 11,, !!,, ......))
+              Insert the character typed.
+       ttrraannssppoossee--cchhaarrss ((CC--tt))
+              Drag  the  character  before point forward over the character at
+              point, moving point forward as well.  If point is at the end  of
+              the  line, then this transposes the two characters before point.
+              Negative arguments have no effect.
+       ttrraannssppoossee--wwoorrddss ((MM--tt))
+              Drag the word before point past the  word  after  point,  moving
+              point  over  that  word  as well.  If point is at the end of the
+              line, this transposes the last two words on the line.
+       uuppccaassee--wwoorrdd ((MM--uu))
+              Uppercase the current (or following) word.  With a negative  ar-
+              gument, uppercase the previous word, but do not move point.
+       ddoowwnnccaassee--wwoorrdd ((MM--ll))
+              Lowercase  the current (or following) word.  With a negative ar-
+              gument, lowercase the previous word, but do not move point.
+       ccaappiittaalliizzee--wwoorrdd ((MM--cc))
+              Capitalize the current (or following) word.  With a negative ar-
+              gument, capitalize the previous word, but do not move point.
+       oovveerrwwrriittee--mmooddee
+              Toggle  overwrite mode.  With an explicit positive numeric argu-
+              ment, switches to overwrite mode.  With an explicit non-positive
+              numeric argument, switches to insert mode.  This command affects
+              only eemmaaccss mode; vvii mode does overwrite differently.  Each  call
+              to _r_e_a_d_l_i_n_e_(_) starts in insert mode.  In overwrite mode, charac-
+              ters bound to sseellff--iinnsseerrtt replace the text at point rather  than
+              pushing  the  text  to  the  right.   Characters  bound to bbaacckk--
+              wwaarrdd--ddeelleettee--cchhaarr replace  the  character  before  point  with  a
+              space.  By default, this command is unbound.
+
+   KKiilllliinngg aanndd YYaannkkiinngg
+       kkiillll--lliinnee ((CC--kk))
+              Kill the text from point to the end of the line.
+       bbaacckkwwaarrdd--kkiillll--lliinnee ((CC--xx RRuubboouutt))
+              Kill backward to the beginning of the line.
+       uunniixx--lliinnee--ddiissccaarrdd ((CC--uu))
+              Kill  backward  from  point  to  the beginning of the line.  The
+              killed text is saved on the kill-ring.
+       kkiillll--wwhhoollee--lliinnee
+              Kill all characters on the current line, no matter  where  point
+              is.
+       kkiillll--wwoorrdd ((MM--dd))
+              Kill  from  point  to the end of the current word, or if between
+              words, to the end of the next word.   Word  boundaries  are  the
+              same as those used by ffoorrwwaarrdd--wwoorrdd.
+       bbaacckkwwaarrdd--kkiillll--wwoorrdd ((MM--RRuubboouutt))
+              Kill  the  word  behind  point.  Word boundaries are the same as
+              those used by bbaacckkwwaarrdd--wwoorrdd.
+       sshheellll--kkiillll--wwoorrdd
+              Kill from point to the end of the current word,  or  if  between
+              words,  to  the  end  of the next word.  Word boundaries are the
+              same as those used by sshheellll--ffoorrwwaarrdd--wwoorrdd.
+       sshheellll--bbaacckkwwaarrdd--kkiillll--wwoorrdd
+              Kill the word behind point.  Word boundaries  are  the  same  as
+              those used by sshheellll--bbaacckkwwaarrdd--wwoorrdd.
+       uunniixx--wwoorrdd--rruubboouutt ((CC--ww))
+              Kill  the  word behind point, using white space as a word bound-
+              ary.  The killed text is saved on the kill-ring.
+       uunniixx--ffiilleennaammee--rruubboouutt
+              Kill the word behind point, using  white  space  and  the  slash
+              character  as  the word boundaries.  The killed text is saved on
+              the kill-ring.
+       ddeelleettee--hhoorriizzoonnttaall--ssppaaccee ((MM--\\))
+              Delete all spaces and tabs around point.
+       kkiillll--rreeggiioonn
+              Kill the text in the current region.
+       ccooppyy--rreeggiioonn--aass--kkiillll
+              Copy the text in the region to the kill buffer.
+       ccooppyy--bbaacckkwwaarrdd--wwoorrdd
+              Copy the word before point to the kill buffer.  The word  bound-
+              aries are the same as bbaacckkwwaarrdd--wwoorrdd.
+       ccooppyy--ffoorrwwaarrdd--wwoorrdd
+              Copy  the  word  following  point  to the kill buffer.  The word
+              boundaries are the same as ffoorrwwaarrdd--wwoorrdd.
+       yyaannkk ((CC--yy))
+              Yank the top of the kill ring into the buffer at point.
+       yyaannkk--ppoopp ((MM--yy))
+              Rotate the kill ring, and yank the new top.  Only works  follow-
+              ing yyaannkk or yyaannkk--ppoopp.
+
+   NNuummeerriicc AArrgguummeennttss
+       ddiiggiitt--aarrgguummeenntt ((MM--00,, MM--11,, ......,, MM----))
+              Add  this digit to the argument already accumulating, or start a
+              new argument.  M-- starts a negative argument.
+       uunniivveerrssaall--aarrgguummeenntt
+              This is another way to specify an argument.  If this command  is
+              followed  by one or more digits, optionally with a leading minus
+              sign, those digits define the argument.  If the command is  fol-
+              lowed by digits, executing uunniivveerrssaall--aarrgguummeenntt again ends the nu-
+              meric argument, but is otherwise ignored.  As a special case, if
+              this command is immediately followed by a character that is nei-
+              ther a digit nor minus sign, the argument  count  for  the  next
+              command  is multiplied by four.  The argument count is initially
+              one, so executing this function the first time makes  the  argu-
+              ment count four, a second time makes the argument count sixteen,
+              and so on.
+
+   CCoommpplleettiinngg
+       ccoommpplleettee ((TTAABB))
+              Attempt to perform completion on the text  before  point.   BBaasshh
+              attempts completion treating the text as a variable (if the text
+              begins with $$), username (if the text begins with  ~~),  hostname
+              (if  the  text begins with @@), or command (including aliases and
+              functions) in turn.  If none of these produces a match, filename
+              completion is attempted.
+       ppoossssiibbllee--ccoommpplleettiioonnss ((MM--??))
+              List the possible completions of the text before point.
+       iinnsseerrtt--ccoommpplleettiioonnss ((MM--**))
+              Insert  all completions of the text before point that would have
+              been generated by ppoossssiibbllee--ccoommpplleettiioonnss.
+       mmeennuu--ccoommpplleettee
+              Similar to ccoommpplleettee, but replaces the word to be completed  with
+              a  single match from the list of possible completions.  Repeated
+              execution of mmeennuu--ccoommpplleettee steps through the  list  of  possible
+              completions,  inserting  each  match in turn.  At the end of the
+              list of completions, the bell is rung (subject to the setting of
+              bbeellll--ssttyyllee) and the original text is restored.  An argument of _n
+              moves _n positions forward in the list of matches; a negative ar-
+              gument may be used to move backward through the list.  This com-
+              mand is intended to be bound to TTAABB, but is unbound by default.
+       mmeennuu--ccoommpplleettee--bbaacckkwwaarrdd
+              Identical to mmeennuu--ccoommpplleettee, but moves backward through the  list
+              of  possible  completions,  as if mmeennuu--ccoommpplleettee had been given a
+              negative argument.  This command is unbound by default.
+       ddeelleettee--cchhaarr--oorr--lliisstt
+              Deletes the character under the cursor if not at  the  beginning
+              or  end  of  the  line (like ddeelleettee--cchhaarr).  If at the end of the
+              line, behaves identically to ppoossssiibbllee--ccoommpplleettiioonnss.  This command
+              is unbound by default.
+       ccoommpplleettee--ffiilleennaammee ((MM--//))
+              Attempt filename completion on the text before point.
+       ppoossssiibbllee--ffiilleennaammee--ccoommpplleettiioonnss ((CC--xx //))
+              List the possible completions of the text before point, treating
+              it as a filename.
+       ccoommpplleettee--uusseerrnnaammee ((MM--~~))
+              Attempt completion on the text before point, treating  it  as  a
+              username.
+       ppoossssiibbllee--uusseerrnnaammee--ccoommpplleettiioonnss ((CC--xx ~~))
+              List the possible completions of the text before point, treating
+              it as a username.
+       ccoommpplleettee--vvaarriiaabbllee ((MM--$$))
+              Attempt completion on the text before point, treating  it  as  a
+              shell variable.
+       ppoossssiibbllee--vvaarriiaabbllee--ccoommpplleettiioonnss ((CC--xx $$))
+              List the possible completions of the text before point, treating
+              it as a shell variable.
+       ccoommpplleettee--hhoossttnnaammee ((MM--@@))
+              Attempt completion on the text before point, treating  it  as  a
+              hostname.
+       ppoossssiibbllee--hhoossttnnaammee--ccoommpplleettiioonnss ((CC--xx @@))
+              List the possible completions of the text before point, treating
+              it as a hostname.
+       ccoommpplleettee--ccoommmmaanndd ((MM--!!))
+              Attempt completion on the text before point, treating  it  as  a
+              command  name.   Command  completion  attempts to match the text
+              against  aliases,  reserved  words,   shell   functions,   shell
+              builtins, and finally executable filenames, in that order.
+       ppoossssiibbllee--ccoommmmaanndd--ccoommpplleettiioonnss ((CC--xx !!))
+              List the possible completions of the text before point, treating
+              it as a command name.
+       ddyynnaammiicc--ccoommpplleettee--hhiissttoorryy ((MM--TTAABB))
+              Attempt completion on the text before point, comparing the  text
+              against  lines  from  the  history  list for possible completion
+              matches.
+       ddaabbbbrreevv--eexxppaanndd
+              Attempt menu completion on the text before point, comparing  the
+              text against lines from the history list for possible completion
+              matches.
+       ccoommpplleettee--iinnttoo--bbrraacceess ((MM--{{))
+              Perform filename completion and insert the list of possible com-
+              pletions  enclosed within braces so the list is available to the
+              shell (see BBrraaccee EExxppaannssiioonn above).
+
+   KKeeyybbooaarrdd MMaaccrrooss
+       ssttaarrtt--kkbbdd--mmaaccrroo ((CC--xx (())
+              Begin saving the characters  typed  into  the  current  keyboard
+              macro.
+       eenndd--kkbbdd--mmaaccrroo ((CC--xx ))))
+              Stop saving the characters typed into the current keyboard macro
+              and store the definition.
+       ccaallll--llaasstt--kkbbdd--mmaaccrroo ((CC--xx ee))
+              Re-execute the last keyboard macro defined, by making the  char-
+              acters in the macro appear as if typed at the keyboard.
+       pprriinntt--llaasstt--kkbbdd--mmaaccrroo (())
+              Print  the  last keyboard macro defined in a format suitable for
+              the _i_n_p_u_t_r_c file.
+
+   MMiisscceellllaanneeoouuss
+       rree--rreeaadd--iinniitt--ffiillee ((CC--xx CC--rr))
+              Read in the contents of the _i_n_p_u_t_r_c file,  and  incorporate  any
+              bindings or variable assignments found there.
+       aabboorrtt ((CC--gg))
+              Abort  the  current editing command and ring the terminal's bell
+              (subject to the setting of bbeellll--ssttyyllee).
+       ddoo--lloowweerrccaassee--vveerrssiioonn ((MM--AA,, MM--BB,, MM--_x,, ......))
+              If the metafied character _x is uppercase, run the  command  that
+              is bound to the corresponding metafied lowercase character.  The
+              behavior is undefined if _x is already lowercase.
+       pprreeffiixx--mmeettaa ((EESSCC))
+              Metafy the next character typed.  EESSCC ff is equivalent to MMeettaa--ff.
+       uunnddoo ((CC--__,, CC--xx CC--uu))
+              Incremental undo, separately remembered for each line.
+       rreevveerrtt--lliinnee ((MM--rr))
+              Undo all changes made to this line.  This is like executing  the
+              uunnddoo  command  enough  times  to  return the line to its initial
+              state.
+       ttiillddee--eexxppaanndd ((MM--&&))
+              Perform tilde expansion on the current word.
+       sseett--mmaarrkk ((CC--@@,, MM--<<ssppaaccee>>))
+              Set the mark to the point.  If a numeric argument  is  supplied,
+              the mark is set to that position.
+       eexxcchhaannggee--ppooiinntt--aanndd--mmaarrkk ((CC--xx CC--xx))
+              Swap  the  point  with the mark.  The current cursor position is
+              set to the saved position, and the old cursor position is  saved
+              as the mark.
+       cchhaarraacctteerr--sseeaarrcchh ((CC--]]))
+              A character is read and point is moved to the next occurrence of
+              that character.  A negative count searches for  previous  occur-
+              rences.
+       cchhaarraacctteerr--sseeaarrcchh--bbaacckkwwaarrdd ((MM--CC--]]))
+              A  character  is  read and point is moved to the previous occur-
+              rence of that character.  A negative count searches  for  subse-
+              quent occurrences.
+       sskkiipp--ccssii--sseeqquueennccee
+              Read  enough  characters to consume a multi-key sequence such as
+              those defined for keys like Home and End.  Such sequences  begin
+              with a Control Sequence Indicator (CSI), usually ESC-[.  If this
+              sequence is bound to "\[", keys producing  such  sequences  will
+              have  no  effect  unless explicitly bound to a readline command,
+              instead of inserting stray characters into the  editing  buffer.
+              This is unbound by default, but usually bound to ESC-[.
+       iinnsseerrtt--ccoommmmeenntt ((MM--##))
+              Without  a  numeric  argument,  the  value  of the readline ccoomm--
+              mmeenntt--bbeeggiinn variable is inserted at the beginning of the  current
+              line.  If a numeric argument is supplied, this command acts as a
+              toggle: if the characters at the beginning of the  line  do  not
+              match  the value of ccoommmmeenntt--bbeeggiinn, the value is inserted, other-
+              wise the characters in ccoommmmeenntt--bbeeggiinn are deleted from the begin-
+              ning  of the line.  In either case, the line is accepted as if a
+              newline had been typed.   The  default  value  of  ccoommmmeenntt--bbeeggiinn
+              causes  this  command  to make the current line a shell comment.
+              If a numeric argument causes the comment  character  to  be  re-
+              moved, the line will be executed by the shell.
+       gglloobb--ccoommpplleettee--wwoorrdd ((MM--gg))
+              The  word  before point is treated as a pattern for pathname ex-
+              pansion, with an asterisk implicitly appended.  This pattern  is
+              used  to generate a list of matching filenames for possible com-
+              pletions.
+       gglloobb--eexxppaanndd--wwoorrdd ((CC--xx **))
+              The word before point is treated as a pattern for  pathname  ex-
+              pansion, and the list of matching filenames is inserted, replac-
+              ing the word.  If a numeric argument is supplied, an asterisk is
+              appended before pathname expansion.
+       gglloobb--lliisstt--eexxppaannssiioonnss ((CC--xx gg))
+              The  list  of  expansions  that  would  have  been  generated by
+              gglloobb--eexxppaanndd--wwoorrdd is displayed, and the line is  redrawn.   If  a
+              numeric  argument  is  supplied,  an asterisk is appended before
+              pathname expansion.
+       dduummpp--ffuunnccttiioonnss
+              Print all of the functions and their key bindings to  the  read-
+              line output stream.  If a numeric argument is supplied, the out-
+              put is formatted in such a way that it can be made  part  of  an
+              _i_n_p_u_t_r_c file.
+       dduummpp--vvaarriiaabblleess
+              Print all of the settable readline variables and their values to
+              the readline output stream.  If a numeric argument is  supplied,
+              the  output  is formatted in such a way that it can be made part
+              of an _i_n_p_u_t_r_c file.
+       dduummpp--mmaaccrrooss
+              Print all of the readline key sequences bound to macros and  the
+              strings  they  output.   If  a numeric argument is supplied, the
+              output is formatted in such a way that it can be made part of an
+              _i_n_p_u_t_r_c file.
+       ddiissppllaayy--sshheellll--vveerrssiioonn ((CC--xx CC--vv))
+              Display version information about the current instance of bbaasshh.
+
+   PPrrooggrraammmmaabbllee CCoommpplleettiioonn
+       When  word  completion  is  attempted  for an argument to a command for
+       which a completion specification (a _c_o_m_p_s_p_e_c) has  been  defined  using
+       the  ccoommpplleettee  builtin (see SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS below), the program-
+       mable completion facilities are invoked.
+
+       First, the command name is identified.  If  the  command  word  is  the
+       empty  string (completion attempted at the beginning of an empty line),
+       any compspec defined with the --EE option to  ccoommpplleettee  is  used.   If  a
+       compspec  has  been  defined  for that command, the compspec is used to
+       generate the list of possible completions for the word.  If the command
+       word  is  a full pathname, a compspec for the full pathname is searched
+       for first.  If no compspec is found for the full pathname,  an  attempt
+       is  made  to find a compspec for the portion following the final slash.
+       If those searches do not result in a  compspec,  any  compspec  defined
+       with  the --DD option to ccoommpplleettee is used as the default.  If there is no
+       default compspec, bbaasshh attempts alias expansion on the command word  as
+       a  final  resort,  and attempts to find a compspec for the command word
+       from any successful expansion.
+
+       Once a compspec has been found, it is used  to  generate  the  list  of
+       matching  words.   If a compspec is not found, the default bbaasshh comple-
+       tion as described above under CCoommpplleettiinngg is performed.
+
+       First, the actions specified by the compspec are  used.   Only  matches
+       which  are prefixed by the word being completed are returned.  When the
+       --ff or --dd option is used for filename or directory name completion,  the
+       shell variable FFIIGGNNOORREE is used to filter the matches.
+
+       Any completions specified by a pathname expansion pattern to the --GG op-
+       tion are generated next.  The words generated by the pattern  need  not
+       match  the  word being completed.  The GGLLOOBBIIGGNNOORREE shell variable is not
+       used to filter the matches, but the FFIIGGNNOORREE variable is used.
+
+       Next, the string specified as the argument to the --WW option is  consid-
+       ered.   The  string is first split using the characters in the IIFFSS spe-
+       cial variable as delimiters.  Shell quoting is honored.  Each  word  is
+       then  expanded  using  brace  expansion, tilde expansion, parameter and
+       variable expansion, command substitution, and arithmetic expansion,  as
+       described above under EEXXPPAANNSSIIOONN.  The results are split using the rules
+       described above under WWoorrdd SSpplliittttiinngg.  The results of the expansion are
+       prefix-matched against the word being completed, and the matching words
+       become the possible completions.
+
+       After these matches have been generated, any shell function or  command
+       specified  with  the --FF and --CC options is invoked.  When the command or
+       function is invoked, the CCOOMMPP__LLIINNEE, CCOOMMPP__PPOOIINNTT, CCOOMMPP__KKEEYY, and CCOOMMPP__TTYYPPEE
+       variables are assigned values as described above under SShheellll VVaarriiaabblleess.
+       If a shell function is being invoked,  the  CCOOMMPP__WWOORRDDSS  and  CCOOMMPP__CCWWOORRDD
+       variables  are  also set.  When the function or command is invoked, the
+       first argument ($$11) is the name of the command whose arguments are  be-
+       ing  completed,  the  second argument ($$22) is the word being completed,
+       and the third argument ($$33) is the word preceding the word  being  com-
+       pleted on the current command line.  No filtering of the generated com-
+       pletions against the word being completed is performed; the function or
+       command has complete freedom in generating the matches.
+
+       Any  function specified with --FF is invoked first.  The function may use
+       any of the shell facilities, including the  ccoommppggeenn  builtin  described
+       below,  to  generate the matches.  It must put the possible completions
+       in the CCOOMMPPRREEPPLLYY array variable, one per array element.
+
+       Next, any command specified with the --CC option is invoked in  an  envi-
+       ronment  equivalent to command substitution.  It should print a list of
+       completions, one per line, to the standard output.   Backslash  may  be
+       used to escape a newline, if necessary.
+
+       After  all of the possible completions are generated, any filter speci-
+       fied with the --XX option is applied to the list.  The filter is  a  pat-
+       tern  as  used  for  pathname expansion; a && in the pattern is replaced
+       with the text of the word being completed.  A literal && may be  escaped
+       with  a  backslash; the backslash is removed before attempting a match.
+       Any completion that matches the pattern will be removed from the  list.
+       A leading !! negates the pattern; in this case any completion not match-
+       ing the pattern will be removed.  If the nnooccaasseemmaattcchh  shell  option  is
+       enabled,  the  match  is performed without regard to the case of alpha-
+       betic characters.
+
+       Finally, any prefix and suffix specified with the --PP and --SS options are
+       added to each member of the completion list, and the result is returned
+       to the readline completion code as the list of possible completions.
+
+       If the previously-applied actions do not generate any matches, and  the
+       --oo  ddiirrnnaammeess  option was supplied to ccoommpplleettee when the compspec was de-
+       fined, directory name completion is attempted.
+
+       If the --oo pplluussddiirrss option was supplied to ccoommpplleettee  when  the  compspec
+       was defined, directory name completion is attempted and any matches are
+       added to the results of the other actions.
+
+       By default, if a compspec is found, whatever it generates  is  returned
+       to  the  completion  code as the full set of possible completions.  The
+       default bbaasshh completions are not attempted, and the readline default of
+       filename completion is disabled.  If the --oo bbaasshhddeeffaauulltt option was sup-
+       plied to ccoommpplleettee when the compspec was defined, the bbaasshh default  com-
+       pletions are attempted if the compspec generates no matches.  If the --oo
+       ddeeffaauulltt option was supplied to ccoommpplleettee when the compspec was  defined,
+       readline's  default  completion will be performed if the compspec (and,
+       if attempted, the default bbaasshh completions) generate no matches.
+
+       When a compspec indicates that directory name  completion  is  desired,
+       the  programmable completion functions force readline to append a slash
+       to completed names which are symbolic links to directories, subject  to
+       the  value of the mmaarrkk--ddiirreeccttoorriieess readline variable, regardless of the
+       setting of the mmaarrkk--ssyymmlliinnkkeedd--ddiirreeccttoorriieess readline variable.
+
+       There is some support for dynamically modifying completions.   This  is
+       most  useful  when used in combination with a default completion speci-
+       fied with ccoommpplleettee --DD.  It's possible for shell functions  executed  as
+       completion  handlers  to  indicate that completion should be retried by
+       returning an exit status of 124.  If a shell function returns 124,  and
+       changes the compspec associated with the command on which completion is
+       being attempted (supplied as the first argument when  the  function  is
+       executed), programmable completion restarts from the beginning, with an
+       attempt to find a new compspec for that command.  This allows a set  of
+       completions  to be built dynamically as completion is attempted, rather
+       than being loaded all at once.
+
+       For instance, assuming that there is a library of compspecs, each  kept
+       in  a  file corresponding to the name of the command, the following de-
+       fault completion function would load completions dynamically:
+
+       _completion_loader()
+       {
+            . "/etc/bash_completion.d/$1.sh" >/dev/null 2>&1 && return 124
+       }
+       complete -D -F _completion_loader -o bashdefault -o default
+
+
+HHIISSTTOORRYY
+       When the --oo hhiissttoorryy option to the sseett builtin  is  enabled,  the  shell
+       provides access to the _c_o_m_m_a_n_d _h_i_s_t_o_r_y, the list of commands previously
+       typed.  The value of the HHIISSTTSSIIZZEE variable is used  as  the  number  of
+       commands to save in a history list.  The text of the last HHIISSTTSSIIZZEE com-
+       mands (default 500) is saved.  The shell stores  each  command  in  the
+       history  list  prior to parameter and variable expansion (see EEXXPPAANNSSIIOONN
+       above) but after history expansion is performed, subject to the  values
+       of the shell variables HHIISSTTIIGGNNOORREE and HHIISSTTCCOONNTTRROOLL.
+
+       On startup, the history is initialized from the file named by the vari-
+       able HHIISSTTFFIILLEE (default _~_/_._b_a_s_h___h_i_s_t_o_r_y).  The file named by  the  value
+       of  HHIISSTTFFIILLEE  is  truncated,  if necessary, to contain no more than the
+       number of lines specified by the value of HHIISSTTFFIILLEESSIIZZEE.   If  HHIISSTTFFIILLEE--
+       SSIIZZEE  is unset, or set to null, a non-numeric value, or a numeric value
+       less than zero, the history file is not truncated.   When  the  history
+       file  is  read, lines beginning with the history comment character fol-
+       lowed immediately by a digit are interpreted as timestamps for the fol-
+       lowing history line.  These timestamps are optionally displayed depend-
+       ing on the value of the HHIISSTTTTIIMMEEFFOORRMMAATT variable.   When  a  shell  with
+       history  enabled  exits,  the  last $$HHIISSTTSSIIZZEE lines are copied from the
+       history list to $$HHIISSTTFFIILLEE.  If the hhiissttaappppeenndd shell option  is  enabled
+       (see  the description of sshhoopptt under SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS below), the
+       lines are appended to the history file, otherwise the history  file  is
+       overwritten.   If  HHIISSTTFFIILLEE  is  unset,  or  if the history file is un-
+       writable, the history is not saved.  If the HHIISSTTTTIIMMEEFFOORRMMAATT variable  is
+       set,  time stamps are written to the history file, marked with the his-
+       tory comment character, so they may be preserved across shell sessions.
+       This  uses the history comment character to distinguish timestamps from
+       other history lines.  After saving the history,  the  history  file  is
+       truncated  to contain no more than HHIISSTTFFIILLEESSIIZZEE lines.  If HHIISSTTFFIILLEESSIIZZEE
+       is unset, or set to null, a non-numeric value, or a numeric value  less
+       than zero, the history file is not truncated.
+
+       The  builtin  command ffcc (see SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS below) may be used
+       to list or edit and re-execute a portion of the history list.  The hhiiss--
+       ttoorryy  builtin may be used to display or modify the history list and ma-
+       nipulate the history file.  When  using  command-line  editing,  search
+       commands  are available in each editing mode that provide access to the
+       history list.
+
+       The shell allows control over which commands are saved on  the  history
+       list.  The HHIISSTTCCOONNTTRROOLL and HHIISSTTIIGGNNOORREE variables may be set to cause the
+       shell to save only a subset of the commands entered.  The ccmmddhhiisstt shell
+       option,  if enabled, causes the shell to attempt to save each line of a
+       multi-line command in the same history entry, adding  semicolons  where
+       necessary  to preserve syntactic correctness.  The lliitthhiisstt shell option
+       causes the shell to save the command with embedded newlines instead  of
+       semicolons.  See the description of the sshhoopptt builtin below under SSHHEELLLL
+       BBUUIILLTTIINN CCOOMMMMAANNDDSS for information on setting  and  unsetting  shell  op-
+       tions.
+
+HHIISSTTOORRYY EEXXPPAANNSSIIOONN
+       The  shell  supports a history expansion feature that is similar to the
+       history expansion in ccsshh.  This section describes what syntax  features
+       are  available.   This  feature  is  enabled by default for interactive
+       shells, and can be disabled using the ++HH option to the sseett builtin com-
+       mand (see SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS below).  Non-interactive shells do not
+       perform history expansion by default.
+
+       History expansions introduce words from the history list into the input
+       stream,  making  it  easy to repeat commands, insert the arguments to a
+       previous command into the current input line, or fix errors in previous
+       commands quickly.
+
+       History  expansion  is  performed  immediately after a complete line is
+       read, before the shell breaks it into words, and is performed  on  each
+       line  individually  without  taking  quoting on previous lines into ac-
+       count.  It takes place in two parts.  The first is to  determine  which
+       line  from  the history list to use during substitution.  The second is
+       to select portions of that line for inclusion  into  the  current  one.
+       The  line  selected  from the history is the _e_v_e_n_t, and the portions of
+       that line that are acted upon are _w_o_r_d_s.  Various _m_o_d_i_f_i_e_r_s are  avail-
+       able  to  manipulate the selected words.  The line is broken into words
+       in the same fashion as when reading input, so that several  _m_e_t_a_c_h_a_r_a_c_-
+       _t_e_r-separated words surrounded by quotes are considered one word.  His-
+       tory expansions are introduced by the appearance of the history  expan-
+       sion  character,  which is !! by default.  Only backslash (\\) and single
+       quotes can quote the history expansion character, but the  history  ex-
+       pansion  character is also treated as quoted if it immediately precedes
+       the closing double quote in a double-quoted string.
+
+       Several characters inhibit history expansion if found immediately  fol-
+       lowing  the history expansion character, even if it is unquoted: space,
+       tab, newline, carriage return, and ==.  If the eexxttgglloobb shell  option  is
+       enabled, (( will also inhibit expansion.
+
+       Several  shell  options  settable with the sshhoopptt builtin may be used to
+       tailor the behavior of history expansion.  If the hhiissttvveerriiffyy shell  op-
+       tion  is  enabled (see the description of the sshhoopptt builtin below), and
+       rreeaaddlliinnee is being  used,  history  substitutions  are  not  immediately
+       passed  to  the  shell  parser.  Instead, the expanded line is reloaded
+       into the rreeaaddlliinnee editing buffer for further modification.  If rreeaaddlliinnee
+       is  being  used,  and  the hhiissttrreeeeddiitt shell option is enabled, a failed
+       history substitution will be reloaded into the rreeaaddlliinnee editing  buffer
+       for  correction.   The  --pp option to the hhiissttoorryy builtin command may be
+       used to see what a history expansion will do before using it.   The  --ss
+       option to the hhiissttoorryy builtin may be used to add commands to the end of
+       the history list without actually executing  them,  so  that  they  are
+       available for subsequent recall.
+
+       The  shell allows control of the various characters used by the history
+       expansion mechanism (see the description of hhiissttcchhaarrss above under SShheellll
+       VVaarriiaabblleess).   The shell uses the history comment character to mark his-
+       tory timestamps when writing the history file.
+
+   EEvveenntt DDeessiiggnnaattoorrss
+       An event designator is a reference to a command line entry in the  his-
+       tory  list.   Unless  the reference is absolute, events are relative to
+       the current position in the history list.
+
+       !!      Start a history substitution, except when followed by  a  bbllaannkk,
+              newline,  carriage return, = or ( (when the eexxttgglloobb shell option
+              is enabled using the sshhoopptt builtin).
+       !!_n     Refer to command line _n.
+       !!--_n    Refer to the current command minus _n.
+       !!!!     Refer to the previous command.  This is a synonym for `!-1'.
+       !!_s_t_r_i_n_g
+              Refer to the most recent command preceding the current  position
+              in the history list starting with _s_t_r_i_n_g.
+       !!??_s_t_r_i_n_g[[??]]
+              Refer  to the most recent command preceding the current position
+              in the history list containing _s_t_r_i_n_g.  The trailing  ??  may  be
+              omitted  if  _s_t_r_i_n_g  is  followed  immediately by a newline.  If
+              _s_t_r_i_n_g is missing, the string from the  most  recent  search  is
+              used; it is an error if there is no previous search string.
+       ^^_s_t_r_i_n_g_1^^_s_t_r_i_n_g_2^^
+              Quick  substitution.   Repeat  the  previous  command, replacing
+              _s_t_r_i_n_g_1 with _s_t_r_i_n_g_2.  Equivalent  to  ``!!:s^_s_t_r_i_n_g_1^_s_t_r_i_n_g_2^''
+              (see MMooddiiffiieerrss below).
+       !!##     The entire command line typed so far.
+
+   WWoorrdd DDeessiiggnnaattoorrss
+       Word  designators are used to select desired words from the event.  A ::
+       separates the event specification from the word designator.  It may  be
+       omitted  if  the word designator begins with a ^^, $$, **, --, or %%.  Words
+       are numbered from the beginning of the line, with the first word  being
+       denoted  by  0  (zero).  Words are inserted into the current line sepa-
+       rated by single spaces.
+
+       00 ((zzeerroo))
+              The zeroth word.  For the shell, this is the command word.
+       _n      The _nth word.
+       ^^      The first argument.  That is, word 1.
+       $$      The last word.  This is usually the last argument, but will  ex-
+              pand to the zeroth word if there is only one word in the line.
+       %%      The  first word matched by the most recent `?_s_t_r_i_n_g?' search, if
+              the search string begins with a character  that  is  part  of  a
+              word.
+       _x--_y    A range of words; `-_y' abbreviates `0-_y'.
+       **      All  of  the words but the zeroth.  This is a synonym for `_1_-_$'.
+              It is not an error to use ** if there is just  one  word  in  the
+              event; the empty string is returned in that case.
+       xx**     Abbreviates _x_-_$.
+       xx--     Abbreviates _x_-_$ like xx**, but omits the last word.  If xx is miss-
+              ing, it defaults to 0.
+
+       If a word designator is supplied without an  event  specification,  the
+       previous command is used as the event.
+
+   MMooddiiffiieerrss
+       After  the optional word designator, there may appear a sequence of one
+       or more of the following modifiers, each preceded by a `:'.  These mod-
+       ify, or edit, the word or words selected from the history event.
+
+       hh      Remove a trailing filename component, leaving only the head.
+       tt      Remove all leading filename components, leaving the tail.
+       rr      Remove a trailing suffix of the form _._x_x_x, leaving the basename.
+       ee      Remove all but the trailing suffix.
+       pp      Print the new command but do not execute it.
+       qq      Quote the substituted words, escaping further substitutions.
+       xx      Quote  the  substituted words as with qq, but break into words at
+              bbllaannkkss and newlines.  The qq and xx modifiers are mutually  exclu-
+              sive; the last one supplied is used.
+       ss//_o_l_d//_n_e_w//
+              Substitute  _n_e_w  for  the  first  occurrence of _o_l_d in the event
+              line.  Any character may be used as the delimiter in place of /.
+              The  final  delimiter is optional if it is the last character of
+              the event line.  The delimiter may be quoted in _o_l_d and _n_e_w with
+              a single backslash.  If & appears in _n_e_w, it is replaced by _o_l_d.
+              A single backslash will quote the &.  If _o_l_d is null, it is  set
+              to  the last _o_l_d substituted, or, if no previous history substi-
+              tutions took place, the last _s_t_r_i_n_g in  a  !!??_s_t_r_i_n_g[[??]]   search.
+              If _n_e_w is null, each matching _o_l_d is deleted.
+       &&      Repeat the previous substitution.
+       gg      Cause changes to be applied over the entire event line.  This is
+              used in conjunction with `::ss' (e.g.,  `::ggss//_o_l_d//_n_e_w//')  or  `::&&'.
+              If  used with `::ss', any delimiter can be used in place of /, and
+              the final delimiter is optional if it is the last  character  of
+              the event line.  An aa may be used as a synonym for gg.
+       GG      Apply the following `ss' or `&&' modifier once to each word in the
+              event line.
+
+SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS
+       Unless otherwise noted, each builtin command documented in this section
+       as accepting options preceded by -- accepts ---- to signify the end of the
+       options.  The ::, ttrruuee, ffaallssee, and tteesstt/[[ builtins do not accept options
+       and  do  not treat ---- specially.  The eexxiitt, llooggoouutt, rreettuurrnn, bbrreeaakk, ccoonn--
+       ttiinnuuee, lleett, and sshhiifftt builtins accept and process  arguments  beginning
+       with  -- without requiring ----.  Other builtins that accept arguments but
+       are not specified as accepting options  interpret  arguments  beginning
+       with  --  as  invalid options and require ---- to prevent this interpreta-
+       tion.
+       :: [_a_r_g_u_m_e_n_t_s]
+              No effect; the command does nothing beyond  expanding  _a_r_g_u_m_e_n_t_s
+              and performing any specified redirections.  The return status is
+              zero.
+
+        ..  _f_i_l_e_n_a_m_e [_a_r_g_u_m_e_n_t_s]
+       ssoouurrccee _f_i_l_e_n_a_m_e [_a_r_g_u_m_e_n_t_s]
+              Read and execute commands from _f_i_l_e_n_a_m_e in the current shell en-
+              vironment  and  return  the exit status of the last command exe-
+              cuted from _f_i_l_e_n_a_m_e.  If _f_i_l_e_n_a_m_e  does  not  contain  a  slash,
+              filenames  in  PPAATTHH  are  used  to find the directory containing
+              _f_i_l_e_n_a_m_e.  The file searched for in PPAATTHH need not be executable.
+              When  bbaasshh  is  not  in  _p_o_s_i_x  _m_o_d_e,  the  current directory is
+              searched if no file is found in PPAATTHH.  If the ssoouurrcceeppaatthh  option
+              to  the  sshhoopptt  builtin  command  is turned off, the PPAATTHH is not
+              searched.  If any _a_r_g_u_m_e_n_t_s are supplied, they become the  posi-
+              tional  parameters when _f_i_l_e_n_a_m_e is executed.  Otherwise the po-
+              sitional parameters are unchanged.  If the --TT option is enabled,
+              ssoouurrccee  inherits any trap on DDEEBBUUGG; if it is not, any DDEEBBUUGG trap
+              string is saved and restored around  the  call  to  ssoouurrccee,  and
+              ssoouurrccee  unsets  the  DDEEBBUUGG trap while it executes.  If --TT is not
+              set, and the sourced file changes the DDEEBBUUGG trap, the new  value
+              is  retained  when  ssoouurrccee  completes.  The return status is the
+              status of the last command exited within the  script  (0  if  no
+              commands  are  executed),  and false if _f_i_l_e_n_a_m_e is not found or
+              cannot be read.
+
+       aalliiaass [--pp] [_n_a_m_e[=_v_a_l_u_e] ...]
+              AAlliiaass with no arguments or with the --pp option prints the list of
+              aliases  in  the form aalliiaass _n_a_m_e=_v_a_l_u_e on standard output.  When
+              arguments are supplied, an alias is defined for each _n_a_m_e  whose
+              _v_a_l_u_e  is given.  A trailing space in _v_a_l_u_e causes the next word
+              to be checked for alias substitution when the alias is expanded.
+              For  each  _n_a_m_e  in the argument list for which no _v_a_l_u_e is sup-
+              plied, the name and value of the alias is  printed.   AAlliiaass  re-
+              turns  true  unless  a _n_a_m_e is given for which no alias has been
+              defined.
+
+       bbgg [_j_o_b_s_p_e_c ...]
+              Resume each suspended job _j_o_b_s_p_e_c in the background,  as  if  it
+              had been started with &&.  If _j_o_b_s_p_e_c is not present, the shell's
+              notion of the _c_u_r_r_e_n_t _j_o_b is used.  bbgg _j_o_b_s_p_e_c returns 0  unless
+              run  when  job control is disabled or, when run with job control
+              enabled, any specified _j_o_b_s_p_e_c was  not  found  or  was  started
+              without job control.
+
+       bbiinndd [--mm _k_e_y_m_a_p] [--llppssvvPPSSVVXX]
+       bbiinndd [--mm _k_e_y_m_a_p] [--qq _f_u_n_c_t_i_o_n] [--uu _f_u_n_c_t_i_o_n] [--rr _k_e_y_s_e_q]
+       bbiinndd [--mm _k_e_y_m_a_p] --ff _f_i_l_e_n_a_m_e
+       bbiinndd [--mm _k_e_y_m_a_p] --xx _k_e_y_s_e_q:_s_h_e_l_l_-_c_o_m_m_a_n_d
+       bbiinndd [--mm _k_e_y_m_a_p] _k_e_y_s_e_q:_f_u_n_c_t_i_o_n_-_n_a_m_e
+       bbiinndd [--mm _k_e_y_m_a_p] _k_e_y_s_e_q:_r_e_a_d_l_i_n_e_-_c_o_m_m_a_n_d
+              Display  current  rreeaaddlliinnee key and function bindings, bind a key
+              sequence to a rreeaaddlliinnee function or  macro,  or  set  a  rreeaaddlliinnee
+              variable.  Each non-option argument is a command as it would ap-
+              pear in _._i_n_p_u_t_r_c, but each binding or command must be passed  as
+              a separate argument; e.g., '"\C-x\C-r": re-read-init-file'.  Op-
+              tions, if supplied, have the following meanings:
+              --mm _k_e_y_m_a_p
+                     Use _k_e_y_m_a_p as the keymap to be affected by the subsequent
+                     bindings.  Acceptable _k_e_y_m_a_p names are _e_m_a_c_s_, _e_m_a_c_s_-_s_t_a_n_-
+                     _d_a_r_d_, _e_m_a_c_s_-_m_e_t_a_, _e_m_a_c_s_-_c_t_l_x_,  _v_i_,  _v_i_-_m_o_v_e_,  _v_i_-_c_o_m_m_a_n_d,
+                     and  _v_i_-_i_n_s_e_r_t.   _v_i is equivalent to _v_i_-_c_o_m_m_a_n_d (_v_i_-_m_o_v_e
+                     is also a synonym); _e_m_a_c_s is  equivalent  to  _e_m_a_c_s_-_s_t_a_n_-
+                     _d_a_r_d.
+              --ll     List the names of all rreeaaddlliinnee functions.
+              --pp     Display  rreeaaddlliinnee  function  names and bindings in such a
+                     way that they can be re-read.
+              --PP     List current rreeaaddlliinnee function names and bindings.
+              --ss     Display rreeaaddlliinnee key sequences bound to  macros  and  the
+                     strings  they  output  in such a way that they can be re-
+                     read.
+              --SS     Display rreeaaddlliinnee key sequences bound to  macros  and  the
+                     strings they output.
+              --vv     Display  rreeaaddlliinnee variable names and values in such a way
+                     that they can be re-read.
+              --VV     List current rreeaaddlliinnee variable names and values.
+              --ff _f_i_l_e_n_a_m_e
+                     Read key bindings from _f_i_l_e_n_a_m_e.
+              --qq _f_u_n_c_t_i_o_n
+                     Query about which keys invoke the named _f_u_n_c_t_i_o_n.
+              --uu _f_u_n_c_t_i_o_n
+                     Unbind all keys bound to the named _f_u_n_c_t_i_o_n.
+              --rr _k_e_y_s_e_q
+                     Remove any current binding for _k_e_y_s_e_q.
+              --xx _k_e_y_s_e_q::_s_h_e_l_l_-_c_o_m_m_a_n_d
+                     Cause _s_h_e_l_l_-_c_o_m_m_a_n_d to be executed whenever _k_e_y_s_e_q is en-
+                     tered.   When  _s_h_e_l_l_-_c_o_m_m_a_n_d  is executed, the shell sets
+                     the RREEAADDLLIINNEE__LLIINNEE variable to the contents of  the  rreeaadd--
+                     lliinnee line buffer and the RREEAADDLLIINNEE__PPOOIINNTT and RREEAADDLLIINNEE__MMAARRKK
+                     variables to the current location of the insertion  point
+                     and  the  saved insertion point (the mark), respectively.
+                     If the executed command changes the value of any of RREEAADD--
+                     LLIINNEE__LLIINNEE,  RREEAADDLLIINNEE__PPOOIINNTT,  or  RREEAADDLLIINNEE__MMAARRKK, those new
+                     values will be reflected in the editing state.
+              --XX     List all key sequences bound to shell  commands  and  the
+                     associated commands in a format that can be reused as in-
+                     put.
+
+              The return value is 0 unless an unrecognized option is given  or
+              an error occurred.
+
+       bbrreeaakk [_n]
+              Exit  from  within a ffoorr, wwhhiillee, uunnttiill, or sseelleecctt loop.  If _n is
+              specified, break _n levels.  _n must be >= 1.   If  _n  is  greater
+              than  the number of enclosing loops, all enclosing loops are ex-
+              ited.  The return value is 0 unless _n is  not  greater  than  or
+              equal to 1.
+
+       bbuuiillttiinn _s_h_e_l_l_-_b_u_i_l_t_i_n [_a_r_g_u_m_e_n_t_s]
+              Execute  the  specified shell builtin, passing it _a_r_g_u_m_e_n_t_s, and
+              return its exit status.  This is useful when defining a function
+              whose  name  is the same as a shell builtin, retaining the func-
+              tionality of the builtin within the function.  The ccdd builtin is
+              commonly  redefined  this  way.   The  return status is false if
+              _s_h_e_l_l_-_b_u_i_l_t_i_n is not a shell builtin command.
+
+       ccaalllleerr [_e_x_p_r]
+              Returns the context of any active subroutine call (a shell func-
+              tion or a script executed with the .. or ssoouurrccee builtins).  With-
+              out _e_x_p_r, ccaalllleerr displays the line number and source filename of
+              the  current subroutine call.  If a non-negative integer is sup-
+              plied as _e_x_p_r, ccaalllleerr displays the line number, subroutine name,
+              and  source  file  corresponding to that position in the current
+              execution call stack.  This extra information may be  used,  for
+              example,  to print a stack trace.  The current frame is frame 0.
+              The return value is 0 unless the shell is not executing  a  sub-
+              routine  call or _e_x_p_r does not correspond to a valid position in
+              the call stack.
+
+       ccdd [--LL|[--PP [--ee]] [-@]] [_d_i_r]
+              Change the current directory to _d_i_r.  if _d_i_r  is  not  supplied,
+              the  value of the HHOOMMEE shell variable is the default.  Any addi-
+              tional arguments following _d_i_r are ignored.  The variable CCDDPPAATTHH
+              defines  the  search path for the directory containing _d_i_r: each
+              directory name in CCDDPPAATTHH is searched for _d_i_r.   Alternative  di-
+              rectory  names  in  CCDDPPAATTHH are separated by a colon (:).  A null
+              directory name in CCDDPPAATTHH is the same as the  current  directory,
+              i.e., ``..''.  If _d_i_r begins with a slash (/), then CCDDPPAATTHH is not
+              used.  The --PP option causes ccdd to  use  the  physical  directory
+              structure  by  resolving symbolic links while traversing _d_i_r and
+              before processing instances of _._. in _d_i_r (see also the --PP option
+              to the sseett builtin command); the --LL option forces symbolic links
+              to be followed by resolving the link after processing  instances
+              of _._. in _d_i_r.  If _._. appears in _d_i_r, it is processed by removing
+              the immediately previous pathname component from _d_i_r, back to  a
+              slash  or  the  beginning  of _d_i_r.  If the --ee option is supplied
+              with --PP, and the current working directory  cannot  be  success-
+              fully  determined  after  a successful directory change, ccdd will
+              return an unsuccessful status.  On systems that support it,  the
+              --@@  option  presents  the  extended attributes associated with a
+              file as a directory.  An argument of -- is converted  to  $$OOLLDDPPWWDD
+              before the directory change is attempted.  If a non-empty direc-
+              tory name from CCDDPPAATTHH is used, or if -- is  the  first  argument,
+              and the directory change is successful, the absolute pathname of
+              the new working directory is written  to  the  standard  output.
+              The  return  value  is  true  if  the directory was successfully
+              changed; false otherwise.
+
+       ccoommmmaanndd [--ppVVvv] _c_o_m_m_a_n_d [_a_r_g ...]
+              Run _c_o_m_m_a_n_d with _a_r_g_s  suppressing  the  normal  shell  function
+              lookup.  Only builtin commands or commands found in the PPAATTHH are
+              executed.  If the --pp option is given, the search for _c_o_m_m_a_n_d  is
+              performed  using  a default value for PPAATTHH that is guaranteed to
+              find all of the standard utilities.  If either the --VV or --vv  op-
+              tion  is  supplied, a description of _c_o_m_m_a_n_d is printed.  The --vv
+              option causes a single word indicating the command  or  filename
+              used to invoke _c_o_m_m_a_n_d to be displayed; the --VV option produces a
+              more verbose description.  If the --VV or --vv option  is  supplied,
+              the  exit  status  is  0 if _c_o_m_m_a_n_d was found, and 1 if not.  If
+              neither option is supplied and an error occurred or _c_o_m_m_a_n_d can-
+              not  be found, the exit status is 127.  Otherwise, the exit sta-
+              tus of the ccoommmmaanndd builtin is the exit status of _c_o_m_m_a_n_d.
+
+       ccoommppggeenn [_o_p_t_i_o_n] [_w_o_r_d]
+              Generate possible completion matches for _w_o_r_d according  to  the
+              _o_p_t_i_o_ns,  which  may  be  any  option  accepted  by the ccoommpplleettee
+              builtin with the exception of --pp and --rr, and write  the  matches
+              to  the  standard  output.  When using the --FF or --CC options, the
+              various shell variables set by the programmable  completion  fa-
+              cilities, while available, will not have useful values.
+
+              The matches will be generated in the same way as if the program-
+              mable completion code had generated them directly from a comple-
+              tion  specification  with the same flags.  If _w_o_r_d is specified,
+              only those completions matching _w_o_r_d will be displayed.
+
+              The return value is true unless an invalid option  is  supplied,
+              or no matches were generated.
+
+       ccoommpplleettee  [--aabbccddeeffggjjkkssuuvv] [--oo _c_o_m_p_-_o_p_t_i_o_n] [--DDEEII] [--AA _a_c_t_i_o_n] [--GG _g_l_o_b_-
+       _p_a_t] [--WW _w_o_r_d_l_i_s_t]
+              [--FF _f_u_n_c_t_i_o_n] [--CC _c_o_m_m_a_n_d] [--XX _f_i_l_t_e_r_p_a_t] [--PP _p_r_e_f_i_x]  [--SS  _s_u_f_-
+              _f_i_x] _n_a_m_e [_n_a_m_e _._._.]
+       ccoommpplleettee --pprr [--DDEEII] [_n_a_m_e ...]
+              Specify  how arguments to each _n_a_m_e should be completed.  If the
+              --pp option is supplied, or if no options are  supplied,  existing
+              completion  specifications are printed in a way that allows them
+              to be reused as input.  The --rr option removes a completion spec-
+              ification  for each _n_a_m_e, or, if no _n_a_m_es are supplied, all com-
+              pletion specifications.  The --DD option indicates that other sup-
+              plied  options  and actions should apply to the ``default'' com-
+              mand completion; that is, completion attempted on a command  for
+              which  no completion has previously been defined.  The --EE option
+              indicates that other supplied options and actions  should  apply
+              to  ``empty''  command completion; that is, completion attempted
+              on a blank line.  The --II option indicates  that  other  supplied
+              options  and  actions  should apply to completion on the initial
+              non-assignment word on the line, or after  a  command  delimiter
+              such  as  ;;  or ||, which is usually command name completion.  If
+              multiple options are supplied, the --DD  option  takes  precedence
+              over --EE, and both take precedence over --II.  If any of --DD, --EE, or
+              --II are supplied, any other _n_a_m_e  arguments  are  ignored;  these
+              completions only apply to the case specified by the option.
+
+              The  process  of  applying  these completion specifications when
+              word completion is attempted is described above  under  PPrrooggrraamm--
+              mmaabbllee CCoommpplleettiioonn.
+
+              Other  options,  if specified, have the following meanings.  The
+              arguments to the --GG, --WW, and --XX options (and, if necessary,  the
+              --PP  and --SS options) should be quoted to protect them from expan-
+              sion before the ccoommpplleettee builtin is invoked.
+              --oo _c_o_m_p_-_o_p_t_i_o_n
+                      The _c_o_m_p_-_o_p_t_i_o_n controls several aspects  of  the  comp-
+                      spec's  behavior beyond the simple generation of comple-
+                      tions.  _c_o_m_p_-_o_p_t_i_o_n may be one of:
+                      bbaasshhddeeffaauulltt
+                              Perform the rest of the default bbaasshh completions
+                              if the compspec generates no matches.
+                      ddeeffaauulltt Use  readline's  default  filename completion if
+                              the compspec generates no matches.
+                      ddiirrnnaammeess
+                              Perform directory name completion if  the  comp-
+                              spec generates no matches.
+                      ffiilleennaammeess
+                              Tell  readline that the compspec generates file-
+                              names, so it can perform  any  filename-specific
+                              processing  (like  adding  a  slash to directory
+                              names, quoting special characters, or  suppress-
+                              ing  trailing spaces).  Intended to be used with
+                              shell functions.
+                      nnooqquuoottee Tell readline not to quote the  completed  words
+                              if  they are filenames (quoting filenames is the
+                              default).
+                      nnoossoorrtt  Tell readline not to sort the list  of  possible
+                              completions alphabetically.
+                      nnoossppaaccee Tell  readline  not  to  append a space (the de-
+                              fault) to words completed  at  the  end  of  the
+                              line.
+                      pplluussddiirrss
+                              After  any  matches  defined by the compspec are
+                              generated,  directory  name  completion  is  at-
+                              tempted and any matches are added to the results
+                              of the other actions.
+              --AA _a_c_t_i_o_n
+                      The _a_c_t_i_o_n may be one of the  following  to  generate  a
+                      list of possible completions:
+                      aalliiaass   Alias names.  May also be specified as --aa.
+                      aarrrraayyvvaarr
+                              Array variable names.
+                      bbiinnddiinngg RReeaaddlliinnee key binding names.
+                      bbuuiillttiinn Names  of  shell  builtin commands.  May also be
+                              specified as --bb.
+                      ccoommmmaanndd Command names.  May also be specified as --cc.
+                      ddiirreeccttoorryy
+                              Directory names.  May also be specified as --dd.
+                      ddiissaabblleedd
+                              Names of disabled shell builtins.
+                      eennaabblleedd Names of enabled shell builtins.
+                      eexxppoorrtt  Names of exported shell variables.  May also  be
+                              specified as --ee.
+                      ffiillee    File names.  May also be specified as --ff.
+                      ffuunnccttiioonn
+                              Names of shell functions.
+                      ggrroouupp   Group names.  May also be specified as --gg.
+                      hheellppttooppiicc
+                              Help topics as accepted by the hheellpp builtin.
+                      hhoossttnnaammee
+                              Hostnames,  as  taken from the file specified by
+                              the HHOOSSTTFFIILLEE shell variable.
+                      jjoobb     Job names, if job control is active.   May  also
+                              be specified as --jj.
+                      kkeeyywwoorrdd Shell  reserved words.  May also be specified as
+                              --kk.
+                      rruunnnniinngg Names of running jobs, if job control is active.
+                      sseerrvviiccee Service names.  May also be specified as --ss.
+                      sseettoopptt  Valid arguments for the --oo  option  to  the  sseett
+                              builtin.
+                      sshhoopptt   Shell  option  names  as  accepted  by the sshhoopptt
+                              builtin.
+                      ssiiggnnaall  Signal names.
+                      ssttooppppeedd Names of stopped jobs, if job control is active.
+                      uusseerr    User names.  May also be specified as --uu.
+                      vvaarriiaabbllee
+                              Names of all shell variables.  May also be spec-
+                              ified as --vv.
+              --CC _c_o_m_m_a_n_d
+                      _c_o_m_m_a_n_d  is  executed in a subshell environment, and its
+                      output is used as the possible completions.
+              --FF _f_u_n_c_t_i_o_n
+                      The shell function _f_u_n_c_t_i_o_n is executed in  the  current
+                      shell  environment.   When the function is executed, the
+                      first argument ($$11) is the name of the command whose ar-
+                      guments are being completed, the second argument ($$22) is
+                      the word being completed, and the third argument ($$33) is
+                      the  word preceding the word being completed on the cur-
+                      rent command line.  When it finishes, the possible  com-
+                      pletions  are  retrieved from the value of the CCOOMMPPRREEPPLLYY
+                      array variable.
+              --GG _g_l_o_b_p_a_t
+                      The pathname expansion pattern _g_l_o_b_p_a_t  is  expanded  to
+                      generate the possible completions.
+              --PP _p_r_e_f_i_x
+                      _p_r_e_f_i_x  is  added at the beginning of each possible com-
+                      pletion after all other options have been applied.
+              --SS _s_u_f_f_i_x
+                      _s_u_f_f_i_x is appended to each possible completion after all
+                      other options have been applied.
+              --WW _w_o_r_d_l_i_s_t
+                      The  _w_o_r_d_l_i_s_t  is  split using the characters in the IIFFSS
+                      special variable as delimiters, and each resultant  word
+                      is  expanded.  Shell quoting is honored within _w_o_r_d_l_i_s_t,
+                      in order to provide a mechanism for the words to contain
+                      shell  metacharacters or characters in the value of IIFFSS.
+                      The possible completions are the members of  the  resul-
+                      tant list which match the word being completed.
+              --XX _f_i_l_t_e_r_p_a_t
+                      _f_i_l_t_e_r_p_a_t  is  a pattern as used for pathname expansion.
+                      It is applied to the list of possible completions gener-
+                      ated  by  the  preceding options and arguments, and each
+                      completion matching _f_i_l_t_e_r_p_a_t is removed from the  list.
+                      A  leading  !!  in _f_i_l_t_e_r_p_a_t negates the pattern; in this
+                      case, any completion not matching _f_i_l_t_e_r_p_a_t is removed.
+
+              The return value is true unless an invalid option  is  supplied,
+              an  option  other than --pp or --rr is supplied without a _n_a_m_e argu-
+              ment, an attempt is made to remove  a  completion  specification
+              for a _n_a_m_e for which no specification exists, or an error occurs
+              adding a completion specification.
+
+       ccoommppoopptt [--oo _o_p_t_i_o_n] [--DDEEII] [++oo _o_p_t_i_o_n] [_n_a_m_e]
+              Modify completion options for each _n_a_m_e  according  to  the  _o_p_-
+              _t_i_o_ns, or for the currently-executing completion if no _n_a_m_es are
+              supplied.  If no _o_p_t_i_o_ns are given, display the  completion  op-
+              tions  for  each  _n_a_m_e  or the current completion.  The possible
+              values of _o_p_t_i_o_n are those valid for the  ccoommpplleettee  builtin  de-
+              scribed  above.  The --DD option indicates that other supplied op-
+              tions should apply to the ``default'' command  completion;  that
+              is,  completion  attempted  on a command for which no completion
+              has previously been defined.  The --EE option indicates that other
+              supplied  options  should apply to ``empty'' command completion;
+              that is, completion attempted on a blank line.   The  --II  option
+              indicates that other supplied options should apply to completion
+              on the initial non-assignment word on the line, or after a  com-
+              mand  delimiter  such  as  ;; or ||, which is usually command name
+              completion.
+
+              The return value is true unless an invalid option  is  supplied,
+              an attempt is made to modify the options for a _n_a_m_e for which no
+              completion specification exists, or an output error occurs.
+
+       ccoonnttiinnuuee [_n]
+              Resume the next iteration of the enclosing ffoorr, wwhhiillee, uunnttiill, or
+              sseelleecctt  loop.   If  _n  is specified, resume at the _nth enclosing
+              loop.  _n must be >= 1.  If _n is greater than the number  of  en-
+              closing  loops, the last enclosing loop (the ``top-level'' loop)
+              is resumed.  The return value is 0 unless _n is not greater  than
+              or equal to 1.
+
+       ddeeccllaarree [--aaAAffFFggiiIIllnnrrttuuxx] [--pp] [_n_a_m_e[=_v_a_l_u_e] ...]
+       ttyyppeesseett [--aaAAffFFggiiIIllnnrrttuuxx] [--pp] [_n_a_m_e[=_v_a_l_u_e] ...]
+              Declare  variables and/or give them attributes.  If no _n_a_m_es are
+              given then display the values of variables.  The --pp option  will
+              display the attributes and values of each _n_a_m_e.  When --pp is used
+              with _n_a_m_e arguments, additional options, other than --ff  and  --FF,
+              are  ignored.   When  --pp  is supplied without _n_a_m_e arguments, it
+              will display the attributes and values of all  variables  having
+              the attributes specified by the additional options.  If no other
+              options are supplied with  --pp,  ddeeccllaarree  will  display  the  at-
+              tributes  and values of all shell variables.  The --ff option will
+              restrict the display to shell functions.  The --FF option inhibits
+              the  display of function definitions; only the function name and
+              attributes are printed.  If the eexxttddeebbuugg shell option is enabled
+              using  sshhoopptt,  the  source  file name and line number where each
+              _n_a_m_e is defined are displayed as well.  The  --FF  option  implies
+              --ff.  The --gg option forces variables to be created or modified at
+              the global scope, even when ddeeccllaarree is executed in a shell func-
+              tion.   It  is ignored in all other cases.  The --II option causes
+              local variables to inherit the attributes  (except  the  _n_a_m_e_r_e_f
+              attribute) and value of any existing variable with the same _n_a_m_e
+              at a surrounding scope.  If there is no existing  variable,  the
+              local variable is initially unset.  The following options can be
+              used to restrict output to variables with the  specified  attri-
+              bute or to give variables attributes:
+              --aa     Each  _n_a_m_e  is  an  indexed  array  variable  (see AArrrraayyss
+                     above).
+              --AA     Each _n_a_m_e is an associative array  variable  (see  AArrrraayyss
+                     above).
+              --ff     Use function names only.
+              --ii     The variable is treated as an integer; arithmetic evalua-
+                     tion (see AARRIITTHHMMEETTIICC EEVVAALLUUAATTIIOONN above) is performed  when
+                     the variable is assigned a value.
+              --ll     When  the  variable  is  assigned a value, all upper-case
+                     characters are converted to lower-case.   The  upper-case
+                     attribute is disabled.
+              --nn     Give  each  _n_a_m_e  the _n_a_m_e_r_e_f attribute, making it a name
+                     reference to another variable.  That  other  variable  is
+                     defined  by  the  value of _n_a_m_e.  All references, assign-
+                     ments, and attribute modifications to _n_a_m_e, except  those
+                     using  or changing the --nn attribute itself, are performed
+                     on the variable referenced by _n_a_m_e's value.  The  nameref
+                     attribute cannot be applied to array variables.
+              --rr     Make _n_a_m_es readonly.  These names cannot then be assigned
+                     values by subsequent assignment statements or unset.
+              --tt     Give each _n_a_m_e the _t_r_a_c_e attribute.  Traced functions in-
+                     herit  the DDEEBBUUGG and RREETTUURRNN traps from the calling shell.
+                     The trace attribute has no special meaning for variables.
+              --uu     When the variable is assigned  a  value,  all  lower-case
+                     characters  are  converted to upper-case.  The lower-case
+                     attribute is disabled.
+              --xx     Mark _n_a_m_es for export to subsequent commands via the  en-
+                     vironment.
+
+              Using  `+'  instead of `-' turns off the attribute instead, with
+              the exceptions that ++aa and ++AA may not be used to  destroy  array
+              variables  and  ++rr will not remove the readonly attribute.  When
+              used in a function, ddeeccllaarree and ttyyppeesseett make each _n_a_m_e local, as
+              with  the llooccaall command, unless the --gg option is supplied.  If a
+              variable name is followed by =_v_a_l_u_e, the value of  the  variable
+              is  set  to _v_a_l_u_e.  When using --aa or --AA and the compound assign-
+              ment syntax to create array variables, additional attributes  do
+              not  take effect until subsequent assignments.  The return value
+              is 0 unless an invalid option is encountered, an attempt is made
+              to define a function using ``-f foo=bar'', an attempt is made to
+              assign a value to a readonly variable, an attempt is made to as-
+              sign a value to an array variable without using the compound as-
+              signment syntax (see AArrrraayyss above), one of the _n_a_m_e_s  is  not  a
+              valid  shell variable name, an attempt is made to turn off read-
+              only status for a readonly variable, an attempt is made to  turn
+              off array status for an array variable, or an attempt is made to
+              display a non-existent function with --ff.
+
+       ddiirrss [[--ccllppvv]] [[++_n]] [[--_n]]
+              Without options, displays the list of currently  remembered  di-
+              rectories.   The default display is on a single line with direc-
+              tory names separated by spaces.  Directories are  added  to  the
+              list  with  the  ppuusshhdd command; the ppooppdd command removes entries
+              from the list.  The current directory is always the first direc-
+              tory in the stack.
+              --cc     Clears  the  directory  stack  by deleting all of the en-
+                     tries.
+              --ll     Produces a listing  using  full  pathnames;  the  default
+                     listing format uses a tilde to denote the home directory.
+              --pp     Print the directory stack with one entry per line.
+              --vv     Print  the  directory stack with one entry per line, pre-
+                     fixing each entry with its index in the stack.
+              ++_n     Displays the _nth entry counting from the left of the list
+                     shown by ddiirrss when invoked without options, starting with
+                     zero.
+              --_n     Displays the _nth entry counting from  the  right  of  the
+                     list shown by ddiirrss when invoked without options, starting
+                     with zero.
+
+              The return value is 0 unless an invalid option is supplied or  _n
+              indexes beyond the end of the directory stack.
+
+       ddiissoowwnn [--aarr] [--hh] [_j_o_b_s_p_e_c ... | _p_i_d ... ]
+              Without  options,  remove  each _j_o_b_s_p_e_c from the table of active
+              jobs.  If _j_o_b_s_p_e_c is not present, and neither the --aa nor the  --rr
+              option  is  supplied, the _c_u_r_r_e_n_t _j_o_b is used.  If the --hh option
+              is given, each _j_o_b_s_p_e_c is not removed from  the  table,  but  is
+              marked  so  that  SSIIGGHHUUPP is not sent to the job if the shell re-
+              ceives a SSIIGGHHUUPP.  If no _j_o_b_s_p_e_c is supplied, the --aa option means
+              to  remove or mark all jobs; the --rr option without a _j_o_b_s_p_e_c ar-
+              gument restricts operation to running jobs.  The return value is
+              0 unless a _j_o_b_s_p_e_c does not specify a valid job.
+
+       eecchhoo [--nneeEE] [_a_r_g ...]
+              Output  the  _a_r_gs,  separated  by spaces, followed by a newline.
+              The return status is 0 unless a write error occurs.   If  --nn  is
+              specified, the trailing newline is suppressed.  If the --ee option
+              is given,  interpretation  of  the  following  backslash-escaped
+              characters  is  enabled.  The --EE option disables the interpreta-
+              tion of these escape characters, even on systems where they  are
+              interpreted  by  default.  The xxppgg__eecchhoo shell option may be used
+              to dynamically determine whether or not eecchhoo expands  these  es-
+              cape  characters by default.  eecchhoo does not interpret ---- to mean
+              the end of options.  eecchhoo interprets the  following  escape  se-
+              quences:
+              \\aa     alert (bell)
+              \\bb     backspace
+              \\cc     suppress further output
+              \\ee
+              \\EE     an escape character
+              \\ff     form feed
+              \\nn     new line
+              \\rr     carriage return
+              \\tt     horizontal tab
+              \\vv     vertical tab
+              \\\\     backslash
+              \\00_n_n_n  the  eight-bit  character  whose value is the octal value
+                     _n_n_n (zero to three octal digits)
+              \\xx_H_H   the eight-bit character whose value  is  the  hexadecimal
+                     value _H_H (one or two hex digits)
+              \\uu_H_H_H_H the  Unicode (ISO/IEC 10646) character whose value is the
+                     hexadecimal value _H_H_H_H (one to four hex digits)
+              \\UU_H_H_H_H_H_H_H_H
+                     the Unicode (ISO/IEC 10646) character whose value is  the
+                     hexadecimal value _H_H_H_H_H_H_H_H (one to eight hex digits)
+
+       eennaabbllee [--aa] [--ddnnppss] [--ff _f_i_l_e_n_a_m_e] [_n_a_m_e ...]
+              Enable  and disable builtin shell commands.  Disabling a builtin
+              allows a disk command which has the same name as a shell builtin
+              to  be  executed without specifying a full pathname, even though
+              the shell normally searches for builtins before  disk  commands.
+              If  --nn  is used, each _n_a_m_e is disabled; otherwise, _n_a_m_e_s are en-
+              abled.  For example, to use the tteesstt binary found via  the  PPAATTHH
+              instead  of  the  shell builtin version, run ``enable -n test''.
+              The --ff option means to load the new builtin  command  _n_a_m_e  from
+              shared object _f_i_l_e_n_a_m_e, on systems that support dynamic loading.
+              The --dd option will delete a builtin previously loaded  with  --ff.
+              If no _n_a_m_e arguments are given, or if the --pp option is supplied,
+              a list of shell builtins is printed.  With no other option argu-
+              ments,  the  list consists of all enabled shell builtins.  If --nn
+              is supplied, only disabled builtins are printed.  If --aa is  sup-
+              plied,  the  list printed includes all builtins, with an indica-
+              tion of whether or not each is enabled.  If --ss is supplied,  the
+              output  is restricted to the POSIX _s_p_e_c_i_a_l builtins.  The return
+              value is 0 unless a _n_a_m_e is not a shell builtin or there  is  an
+              error loading a new builtin from a shared object.
+
+       eevvaall [_a_r_g ...]
+              The  _a_r_gs  are read and concatenated together into a single com-
+              mand.  This command is then read and executed by the shell,  and
+              its  exit status is returned as the value of eevvaall.  If there are
+              no _a_r_g_s, or only null arguments, eevvaall returns 0.
+
+       eexxeecc [--ccll] [--aa _n_a_m_e] [_c_o_m_m_a_n_d [_a_r_g_u_m_e_n_t_s]]
+              If _c_o_m_m_a_n_d is specified, it replaces the shell.  No new  process
+              is  created.  The _a_r_g_u_m_e_n_t_s become the arguments to _c_o_m_m_a_n_d.  If
+              the --ll option is supplied, the shell places a dash at the begin-
+              ning of the zeroth argument passed to _c_o_m_m_a_n_d.  This is what _l_o_-
+              _g_i_n(1) does.  The --cc option causes _c_o_m_m_a_n_d to be  executed  with
+              an  empty environment.  If --aa is supplied, the shell passes _n_a_m_e
+              as the zeroth argument to the executed command.  If _c_o_m_m_a_n_d can-
+              not  be executed for some reason, a non-interactive shell exits,
+              unless the eexxeeccffaaiill shell option is enabled.  In that  case,  it
+              returns  failure.   An  interactive shell returns failure if the
+              file cannot be executed.  A subshell  exits  unconditionally  if
+              eexxeecc  fails.  If _c_o_m_m_a_n_d is not specified, any redirections take
+              effect in the current shell, and the return  status  is  0.   If
+              there is a redirection error, the return status is 1.
+
+       eexxiitt [_n]
+              Cause  the  shell  to exit with a status of _n.  If _n is omitted,
+              the exit status is that of the last command executed.  A trap on
+              EEXXIITT is executed before the shell terminates.
+
+       eexxppoorrtt [--ffnn] [_n_a_m_e[=_w_o_r_d]] ...
+       eexxppoorrtt --pp
+              The  supplied _n_a_m_e_s are marked for automatic export to the envi-
+              ronment of subsequently executed commands.  If the --ff option  is
+              given,  the _n_a_m_e_s refer to functions.  If no _n_a_m_e_s are given, or
+              if the --pp option is supplied, a list of names  of  all  exported
+              variables  is printed.  The --nn option causes the export property
+              to be removed from each _n_a_m_e.  If a variable name is followed by
+              =_w_o_r_d, the value of the variable is set to _w_o_r_d.  eexxppoorrtt returns
+              an exit status of 0 unless an invalid option is encountered, one
+              of  the  _n_a_m_e_s is not a valid shell variable name, or --ff is sup-
+              plied with a _n_a_m_e that is not a function.
+
+       ffcc [--ee _e_n_a_m_e] [--llnnrr] [_f_i_r_s_t] [_l_a_s_t]
+       ffcc --ss [_p_a_t=_r_e_p] [_c_m_d]
+              The first form selects a range of commands from  _f_i_r_s_t  to  _l_a_s_t
+              from  the  history  list  and  displays or edits and re-executes
+              them.  _F_i_r_s_t and _l_a_s_t may be specified as a  string  (to  locate
+              the  last command beginning with that string) or as a number (an
+              index into the history list, where a negative number is used  as
+              an  offset  from  the  current command number).  When listing, a
+              _f_i_r_s_t or _l_a_s_t of 0 is equivalent to -1 and -0 is  equivalent  to
+              the  current  command  (usually  the ffcc command); otherwise 0 is
+              equivalent to -1 and -0 is invalid.  If _l_a_s_t is  not  specified,
+              it  is  set  to the current command for listing (so that ``fc -l
+              -10'' prints the last 10 commands) and to _f_i_r_s_t  otherwise.   If
+              _f_i_r_s_t  is  not  specified, it is set to the previous command for
+              editing and -16 for listing.
+
+              The --nn option suppresses the command numbers when listing.   The
+              --rr  option reverses the order of the commands.  If the --ll option
+              is given, the commands are listed on  standard  output.   Other-
+              wise,  the editor given by _e_n_a_m_e is invoked on a file containing
+              those commands.  If _e_n_a_m_e is not given, the value of the  FFCCEEDDIITT
+              variable  is used, and the value of EEDDIITTOORR if FFCCEEDDIITT is not set.
+              If neither variable is set, _v_i is used.  When  editing  is  com-
+              plete, the edited commands are echoed and executed.
+
+              In  the  second form, _c_o_m_m_a_n_d is re-executed after each instance
+              of _p_a_t is replaced by _r_e_p.  _C_o_m_m_a_n_d is interpreted the  same  as
+              _f_i_r_s_t  above.  A useful alias to use with this is ``r="fc -s"'',
+              so that typing ``r cc'' runs the  last  command  beginning  with
+              ``cc'' and typing ``r'' re-executes the last command.
+
+              If  the  first form is used, the return value is 0 unless an in-
+              valid option is encountered or _f_i_r_s_t  or  _l_a_s_t  specify  history
+              lines  out  of  range.  If the --ee option is supplied, the return
+              value is the value of the last command executed or failure if an
+              error occurs with the temporary file of commands.  If the second
+              form is used, the return status is that of the  command  re-exe-
+              cuted,  unless  _c_m_d  does  not  specify a valid history line, in
+              which case ffcc returns failure.
+
+       ffgg [_j_o_b_s_p_e_c]
+              Resume _j_o_b_s_p_e_c in the foreground, and make it the  current  job.
+              If _j_o_b_s_p_e_c is not present, the shell's notion of the _c_u_r_r_e_n_t _j_o_b
+              is used.  The return value is that of the  command  placed  into
+              the  foreground,  or failure if run when job control is disabled
+              or, when run with job control enabled, if _j_o_b_s_p_e_c does not spec-
+              ify  a  valid  job  or  _j_o_b_s_p_e_c specifies a job that was started
+              without job control.
+
+       ggeettooppttss _o_p_t_s_t_r_i_n_g _n_a_m_e [_a_r_g _._._.]
+              ggeettooppttss is used by shell procedures to parse positional  parame-
+              ters.   _o_p_t_s_t_r_i_n_g  contains  the  option characters to be recog-
+              nized; if a character is followed by a colon, the option is  ex-
+              pected to have an argument, which should be separated from it by
+              white space.  The colon and question mark characters may not  be
+              used  as  option  characters.   Each time it is invoked, ggeettooppttss
+              places the next option in the shell variable _n_a_m_e,  initializing
+              _n_a_m_e if it does not exist, and the index of the next argument to
+              be processed into the variable OOPPTTIINNDD.  OOPPTTIINNDD is initialized to
+              1 each time the shell or a shell script is invoked.  When an op-
+              tion requires an argument, ggeettooppttss places that argument into the
+              variable OOPPTTAARRGG.  The shell does not reset OOPPTTIINNDD automatically;
+              it must be manually reset  between  multiple  calls  to  ggeettooppttss
+              within  the  same shell invocation if a new set of parameters is
+              to be used.
+
+              When the end of options is encountered, ggeettooppttss exits with a re-
+              turn value greater than zero.  OOPPTTIINNDD is set to the index of the
+              first non-option argument, and _n_a_m_e is set to ?.
+
+              ggeettooppttss normally parses the positional parameters, but  if  more
+              arguments  are  supplied as _a_r_g values, ggeettooppttss parses those in-
+              stead.
+
+              ggeettooppttss can report errors in two ways.  If the  first  character
+              of  _o_p_t_s_t_r_i_n_g  is  a  colon, _s_i_l_e_n_t error reporting is used.  In
+              normal operation, diagnostic messages are printed  when  invalid
+              options  or  missing  option  arguments are encountered.  If the
+              variable OOPPTTEERRRR is set to 0, no  error  messages  will  be  dis-
+              played, even if the first character of _o_p_t_s_t_r_i_n_g is not a colon.
+
+              If an invalid option is seen, ggeettooppttss places ? into _n_a_m_e and, if
+              not silent, prints an  error  message  and  unsets  OOPPTTAARRGG.   If
+              ggeettooppttss  is  silent, the option character found is placed in OOPP--
+              TTAARRGG and no diagnostic message is printed.
+
+              If a required argument is not found, and ggeettooppttss is not  silent,
+              a  question  mark  (??) is placed in _n_a_m_e, OOPPTTAARRGG is unset, and a
+              diagnostic message is printed.  If ggeettooppttss  is  silent,  then  a
+              colon  (::)  is  placed  in  _n_a_m_e and OOPPTTAARRGG is set to the option
+              character found.
+
+              ggeettooppttss returns true if an option, specified or unspecified,  is
+              found.  It returns false if the end of options is encountered or
+              an error occurs.
+
+       hhaasshh [--llrr] [--pp _f_i_l_e_n_a_m_e] [--ddtt] [_n_a_m_e]
+              Each time hhaasshh is invoked, the full pathname of the command _n_a_m_e
+              is  determined  by searching the directories in $$PPAATTHH and remem-
+              bered.  Any previously-remembered pathname is discarded.  If the
+              --pp option is supplied, no path search is performed, and _f_i_l_e_n_a_m_e
+              is used as the full filename of  the  command.   The  --rr  option
+              causes the shell to forget all remembered locations.  The --dd op-
+              tion causes the shell to forget the remembered location of  each
+              _n_a_m_e.   If the --tt option is supplied, the full pathname to which
+              each _n_a_m_e corresponds is printed.  If  multiple  _n_a_m_e  arguments
+              are supplied with --tt, the _n_a_m_e is printed before the hashed full
+              pathname.  The --ll option causes output to be displayed in a for-
+              mat  that may be reused as input.  If no arguments are given, or
+              if only --ll is supplied, information about remembered commands is
+              printed.   The  return status is true unless a _n_a_m_e is not found
+              or an invalid option is supplied.
+
+       hheellpp [--ddmmss] [_p_a_t_t_e_r_n]
+              Display helpful information about builtin commands.  If  _p_a_t_t_e_r_n
+              is  specified, hheellpp gives detailed help on all commands matching
+              _p_a_t_t_e_r_n; otherwise help for all the builtins and  shell  control
+              structures is printed.
+              --dd     Display a short description of each _p_a_t_t_e_r_n
+              --mm     Display the description of each _p_a_t_t_e_r_n in a manpage-like
+                     format
+              --ss     Display only a short usage synopsis for each _p_a_t_t_e_r_n
+
+              The return status is 0 unless no command matches _p_a_t_t_e_r_n.
+
+       hhiissttoorryy [[_n]]
+       hhiissttoorryy --cc
+       hhiissttoorryy --dd _o_f_f_s_e_t
+       hhiissttoorryy --dd _s_t_a_r_t-_e_n_d
+       hhiissttoorryy --aannrrww [_f_i_l_e_n_a_m_e]
+       hhiissttoorryy --pp _a_r_g [_a_r_g _._._.]
+       hhiissttoorryy --ss _a_r_g [_a_r_g _._._.]
+              With no options, display the command history list with line num-
+              bers.  Lines listed with a ** have been modified.  An argument of
+              _n lists only the last _n lines.  If the shell variable  HHIISSTTTTIIMMEE--
+              FFOORRMMAATT  is  set  and not null, it is used as a format string for
+              _s_t_r_f_t_i_m_e(3) to display the time stamp associated with each  dis-
+              played  history  entry.  No intervening blank is printed between
+              the formatted time stamp and the history line.  If  _f_i_l_e_n_a_m_e  is
+              supplied,  it  is  used as the name of the history file; if not,
+              the value of HHIISSTTFFIILLEE is used.  Options, if supplied,  have  the
+              following meanings:
+              --cc     Clear the history list by deleting all the entries.
+              --dd _o_f_f_s_e_t
+                     Delete  the  history entry at position _o_f_f_s_e_t.  If _o_f_f_s_e_t
+                     is negative, it is interpreted as relative to one greater
+                     than the last history position, so negative indices count
+                     back from the end of the history,  and  an  index  of  -1
+                     refers to the current hhiissttoorryy --dd command.
+              --dd _s_t_a_r_t-_e_n_d
+                     Delete  the  history  entries between positions _s_t_a_r_t and
+                     _e_n_d, inclusive.  Positive and negative values  for  _s_t_a_r_t
+                     and _e_n_d are interpreted as described above.
+              --aa     Append  the  ``new''  history  lines to the history file.
+                     These are history lines entered since  the  beginning  of
+                     the current bbaasshh session, but not already appended to the
+                     history file.
+              --nn     Read the history lines not already read from the  history
+                     file  into the current history list.  These are lines ap-
+                     pended to the history file since  the  beginning  of  the
+                     current bbaasshh session.
+              --rr     Read  the contents of the history file and append them to
+                     the current history list.
+              --ww     Write the current history list to the history file, over-
+                     writing the history file's contents.
+              --pp     Perform  history  substitution  on the following _a_r_g_s and
+                     display the result on  the  standard  output.   Does  not
+                     store  the results in the history list.  Each _a_r_g must be
+                     quoted to disable normal history expansion.
+              --ss     Store the _a_r_g_s in the history list  as  a  single  entry.
+                     The  last  command  in the history list is removed before
+                     the _a_r_g_s are added.
+
+              If the HHIISSTTTTIIMMEEFFOORRMMAATT variable is set, the time  stamp  informa-
+              tion  associated  with each history entry is written to the his-
+              tory file, marked with the history comment character.  When  the
+              history  file  is read, lines beginning with the history comment
+              character followed immediately by a  digit  are  interpreted  as
+              timestamps for the following history entry.  The return value is
+              0 unless an invalid option is encountered, an error occurs while
+              reading  or  writing the history file, an invalid _o_f_f_s_e_t is sup-
+              plied as an argument to --dd, or the history expansion supplied as
+              an argument to --pp fails.
+
+       jjoobbss [--llnnpprrss] [ _j_o_b_s_p_e_c ... ]
+       jjoobbss --xx _c_o_m_m_a_n_d [ _a_r_g_s ... ]
+              The first form lists the active jobs.  The options have the fol-
+              lowing meanings:
+              --ll     List process IDs in addition to the normal information.
+              --nn     Display information only about  jobs  that  have  changed
+                     status since the user was last notified of their status.
+              --pp     List  only  the  process  ID  of  the job's process group
+                     leader.
+              --rr     Display only running jobs.
+              --ss     Display only stopped jobs.
+
+              If _j_o_b_s_p_e_c is given, output is restricted to  information  about
+              that  job.   The  return status is 0 unless an invalid option is
+              encountered or an invalid _j_o_b_s_p_e_c is supplied.
+
+              If the --xx option is supplied, jjoobbss replaces any _j_o_b_s_p_e_c found in
+              _c_o_m_m_a_n_d or _a_r_g_s with the corresponding process group ID, and ex-
+              ecutes _c_o_m_m_a_n_d passing it _a_r_g_s, returning its exit status.
+
+       kkiillll [--ss _s_i_g_s_p_e_c | --nn _s_i_g_n_u_m | --_s_i_g_s_p_e_c] [_p_i_d | _j_o_b_s_p_e_c] ...
+       kkiillll --ll|--LL [_s_i_g_s_p_e_c | _e_x_i_t___s_t_a_t_u_s]
+              Send the signal named by _s_i_g_s_p_e_c  or  _s_i_g_n_u_m  to  the  processes
+              named  by  _p_i_d or _j_o_b_s_p_e_c.  _s_i_g_s_p_e_c is either a case-insensitive
+              signal name such as SSIIGGKKIILLLL (with or without the SSIIGG prefix)  or
+              a  signal  number; _s_i_g_n_u_m is a signal number.  If _s_i_g_s_p_e_c is not
+              present, then SSIIGGTTEERRMM is assumed.  An argument of --ll  lists  the
+              signal  names.   If any arguments are supplied when --ll is given,
+              the names of the signals  corresponding  to  the  arguments  are
+              listed, and the return status is 0.  The _e_x_i_t___s_t_a_t_u_s argument to
+              --ll is a number specifying either a signal  number  or  the  exit
+              status  of  a  process terminated by a signal.  The --LL option is
+              equivalent to --ll.  kkiillll returns true if at least one signal  was
+              successfully sent, or false if an error occurs or an invalid op-
+              tion is encountered.
+
+       lleett _a_r_g [_a_r_g ...]
+              Each _a_r_g is an arithmetic expression to be evaluated (see AARRIITTHH--
+              MMEETTIICC  EEVVAALLUUAATTIIOONN  above).   If the last _a_r_g evaluates to 0, lleett
+              returns 1; 0 is returned otherwise.
+
+       llooccaall [_o_p_t_i_o_n] [_n_a_m_e[=_v_a_l_u_e] ... | - ]
+              For each argument, a local variable named _n_a_m_e is  created,  and
+              assigned  _v_a_l_u_e.   The _o_p_t_i_o_n can be any of the options accepted
+              by ddeeccllaarree.  When llooccaall is used within a function, it causes the
+              variable  _n_a_m_e  to have a visible scope restricted to that func-
+              tion and its children.  If _n_a_m_e is -, the set of  shell  options
+              is  made  local to the function in which llooccaall is invoked: shell
+              options changed using the sseett builtin inside  the  function  are
+              restored  to  their  original  values when the function returns.
+              The restore is effected as if a series of sseett commands were exe-
+              cuted  to restore the values that were in place before the func-
+              tion.  With no operands, llooccaall writes a list of local  variables
+              to  the  standard  output.  It is an error to use llooccaall when not
+              within a function.  The return status is 0 unless llooccaall is  used
+              outside  a  function,  an invalid _n_a_m_e is supplied, or _n_a_m_e is a
+              readonly variable.
+
+       llooggoouutt Exit a login shell.
+
+       mmaappffiillee [--dd _d_e_l_i_m] [--nn _c_o_u_n_t] [--OO _o_r_i_g_i_n] [--ss _c_o_u_n_t] [--tt] [--uu  _f_d]  [--CC
+       _c_a_l_l_b_a_c_k] [--cc _q_u_a_n_t_u_m] [_a_r_r_a_y]
+       rreeaaddaarrrraayy [--dd _d_e_l_i_m] [--nn _c_o_u_n_t] [--OO _o_r_i_g_i_n] [--ss _c_o_u_n_t] [--tt] [--uu _f_d] [--CC
+       _c_a_l_l_b_a_c_k] [--cc _q_u_a_n_t_u_m] [_a_r_r_a_y]
+              Read lines from the standard input into the indexed array  vari-
+              able  _a_r_r_a_y, or from file descriptor _f_d if the --uu option is sup-
+              plied.  The variable MMAAPPFFIILLEE is the default _a_r_r_a_y.  Options,  if
+              supplied, have the following meanings:
+              --dd     The  first  character  of _d_e_l_i_m is used to terminate each
+                     input line, rather than newline.  If _d_e_l_i_m is  the  empty
+                     string, mmaappffiillee will terminate a line when it reads a NUL
+                     character.
+              --nn     Copy at most _c_o_u_n_t lines.  If _c_o_u_n_t is 0, all  lines  are
+                     copied.
+              --OO     Begin  assigning  to  _a_r_r_a_y at index _o_r_i_g_i_n.  The default
+                     index is 0.
+              --ss     Discard the first _c_o_u_n_t lines read.
+              --tt     Remove a trailing _d_e_l_i_m (default newline) from each  line
+                     read.
+              --uu     Read  lines  from file descriptor _f_d instead of the stan-
+                     dard input.
+              --CC     Evaluate _c_a_l_l_b_a_c_k each time _q_u_a_n_t_u_m lines are read.   The
+                     --cc option specifies _q_u_a_n_t_u_m.
+              --cc     Specify  the  number  of  lines read between each call to
+                     _c_a_l_l_b_a_c_k.
+
+              If --CC is specified without --cc,  the  default  quantum  is  5000.
+              When _c_a_l_l_b_a_c_k is evaluated, it is supplied the index of the next
+              array element to be assigned and the line to be assigned to that
+              element  as  additional  arguments.  _c_a_l_l_b_a_c_k is evaluated after
+              the line is read but before the array element is assigned.
+
+              If not supplied with an explicit origin, mmaappffiillee will clear  _a_r_-
+              _r_a_y before assigning to it.
+
+              mmaappffiillee  returns successfully unless an invalid option or option
+              argument is supplied, _a_r_r_a_y is invalid or  unassignable,  or  if
+              _a_r_r_a_y is not an indexed array.
+
+       ppooppdd [-nn] [+_n] [-_n]
+              Removes  entries  from  the directory stack.  With no arguments,
+              removes the top directory from the stack, and performs a  ccdd  to
+              the new top directory.  Arguments, if supplied, have the follow-
+              ing meanings:
+              --nn     Suppresses the normal change of directory  when  removing
+                     directories from the stack, so that only the stack is ma-
+                     nipulated.
+              ++_n     Removes the _nth entry counting from the left of the  list
+                     shown  by  ddiirrss, starting with zero.  For example: ``popd
+                     +0'' removes the first directory, ``popd +1'' the second.
+              --_n     Removes the _nth entry counting from the right of the list
+                     shown  by  ddiirrss, starting with zero.  For example: ``popd
+                     -0'' removes the last directory, ``popd -1'' the next  to
+                     last.
+
+              If  the ppooppdd command is successful, a ddiirrss is performed as well,
+              and the return status is 0.  ppooppdd returns false  if  an  invalid
+              option is encountered, the directory stack is empty, a non-exis-
+              tent directory stack entry is specified, or the directory change
+              fails.
+
+       pprriinnttff [--vv _v_a_r] _f_o_r_m_a_t [_a_r_g_u_m_e_n_t_s]
+              Write  the  formatted _a_r_g_u_m_e_n_t_s to the standard output under the
+              control of the _f_o_r_m_a_t.  The --vv option causes the  output  to  be
+              assigned  to  the  variable _v_a_r rather than being printed to the
+              standard output.
+
+              The _f_o_r_m_a_t is a character string which contains three  types  of
+              objects:  plain  characters, which are simply copied to standard
+              output, character escape  sequences,  which  are  converted  and
+              copied  to  the standard output, and format specifications, each
+              of which causes printing of the next  successive  _a_r_g_u_m_e_n_t.   In
+              addition to the standard _p_r_i_n_t_f(1) format specifications, pprriinnttff
+              interprets the following extensions:
+              %%bb     causes pprriinnttff to expand backslash escape sequences in the
+                     corresponding _a_r_g_u_m_e_n_t in the same way as eecchhoo --ee.
+              %%qq     causes  pprriinnttff  to output the corresponding _a_r_g_u_m_e_n_t in a
+                     format that can be reused as shell input.
+              %%((_d_a_t_e_f_m_t))TT
+                     causes pprriinnttff to output the  date-time  string  resulting
+                     from  using  _d_a_t_e_f_m_t  as a format string for _s_t_r_f_t_i_m_e(3).
+                     The corresponding _a_r_g_u_m_e_n_t is an integer representing the
+                     number  of seconds since the epoch.  Two special argument
+                     values may be used: -1 represents the current  time,  and
+                     -2  represents the time the shell was invoked.  If no ar-
+                     gument is specified, conversion behaves as if -1 had been
+                     given.   This  is an exception to the usual pprriinnttff behav-
+                     ior.
+
+              The %b, %q, and %T directives all use the field width and preci-
+              sion arguments from the format specification and write that many
+              bytes from (or use that wide a field for) the expanded argument,
+              which usually contains more characters than the original.
+
+              Arguments  to non-string format specifiers are treated as C con-
+              stants, except that a leading plus or minus sign is allowed, and
+              if  the leading character is a single or double quote, the value
+              is the ASCII value of the following character.
+
+              The _f_o_r_m_a_t is reused as necessary to consume all  of  the  _a_r_g_u_-
+              _m_e_n_t_s.  If the _f_o_r_m_a_t requires more _a_r_g_u_m_e_n_t_s than are supplied,
+              the extra format specifications behave as if  a  zero  value  or
+              null  string,  as  appropriate,  had  been supplied.  The return
+              value is zero on success, non-zero on failure.
+
+       ppuusshhdd [--nn] [+_n] [-_n]
+       ppuusshhdd [--nn] [_d_i_r]
+              Adds a directory to the top of the directory stack,  or  rotates
+              the  stack,  making the new top of the stack the current working
+              directory.  With no arguments, ppuusshhdd exchanges the top  two  di-
+              rectories  and  returns  0, unless the directory stack is empty.
+              Arguments, if supplied, have the following meanings:
+              --nn     Suppresses the normal change of directory  when  rotating
+                     or  adding  directories  to  the  stack, so that only the
+                     stack is manipulated.
+              ++_n     Rotates the stack so that  the  _nth  directory  (counting
+                     from  the  left  of the list shown by ddiirrss, starting with
+                     zero) is at the top.
+              --_n     Rotates the stack so that  the  _nth  directory  (counting
+                     from  the  right of the list shown by ddiirrss, starting with
+                     zero) is at the top.
+              _d_i_r    Adds _d_i_r to the directory stack at the top, making it the
+                     new  current working directory as if it had been supplied
+                     as the argument to the ccdd builtin.
+
+              If the ppuusshhdd command is successful, a ddiirrss is performed as well.
+              If  the first form is used, ppuusshhdd returns 0 unless the cd to _d_i_r
+              fails.  With the second form, ppuusshhdd returns 0 unless the  direc-
+              tory  stack  is empty, a non-existent directory stack element is
+              specified, or the directory change to the specified new  current
+              directory fails.
+
+       ppwwdd [--LLPP]
+              Print  the  absolute  pathname of the current working directory.
+              The pathname printed contains no symbolic links if the --PP option
+              is supplied or the --oo pphhyyssiiccaall option to the sseett builtin command
+              is enabled.  If the --LL option is used, the pathname printed  may
+              contain  symbolic links.  The return status is 0 unless an error
+              occurs while reading the name of the current directory or an in-
+              valid option is supplied.
+
+       rreeaadd [--eerrss] [--aa _a_n_a_m_e] [--dd _d_e_l_i_m] [--ii _t_e_x_t] [--nn _n_c_h_a_r_s] [--NN _n_c_h_a_r_s] [--pp
+       _p_r_o_m_p_t] [--tt _t_i_m_e_o_u_t] [--uu _f_d] [_n_a_m_e ...]
+              One line is read from the standard input, or from the  file  de-
+              scriptor _f_d supplied as an argument to the --uu option, split into
+              words as described above under WWoorrdd  SSpplliittttiinngg,  and  the  first
+              word  is assigned to the first _n_a_m_e, the second word to the sec-
+              ond _n_a_m_e, and so on.  If there are more words  than  names,  the
+              remaining words and their intervening delimiters are assigned to
+              the last _n_a_m_e.  If there are fewer words  read  from  the  input
+              stream  than  names, the remaining names are assigned empty val-
+              ues.  The characters in IIFFSS are used  to  split  the  line  into
+              words  using  the  same  rules the shell uses for expansion (de-
+              scribed above under WWoorrdd SSpplliittttiinngg).   The  backslash  character
+              (\\) may be used to remove any special meaning for the next char-
+              acter read and for line  continuation.   Options,  if  supplied,
+              have the following meanings:
+              --aa _a_n_a_m_e
+                     The words are assigned to sequential indices of the array
+                     variable _a_n_a_m_e, starting at 0.  _a_n_a_m_e is unset before any
+                     new  values  are  assigned.  Other _n_a_m_e arguments are ig-
+                     nored.
+              --dd _d_e_l_i_m
+                     The first character of _d_e_l_i_m is used to terminate the in-
+                     put  line,  rather  than  newline.  If _d_e_l_i_m is the empty
+                     string, rreeaadd will terminate a line when it  reads  a  NUL
+                     character.
+              --ee     If the standard input is coming from a terminal, rreeaaddlliinnee
+                     (see RREEAADDLLIINNEE above) is used to obtain the  line.   Read-
+                     line  uses  the  current (or default, if line editing was
+                     not previously active) editing settings, but  uses  Read-
+                     line's default filename completion.
+              --ii _t_e_x_t
+                     If  rreeaaddlliinnee  is  being  used  to  read the line, _t_e_x_t is
+                     placed into the editing buffer before editing begins.
+              --nn _n_c_h_a_r_s
+                     rreeaadd returns after reading _n_c_h_a_r_s characters rather  than
+                     waiting for a complete line of input, but honors a delim-
+                     iter if fewer than _n_c_h_a_r_s characters are read before  the
+                     delimiter.
+              --NN _n_c_h_a_r_s
+                     rreeaadd  returns  after  reading  exactly  _n_c_h_a_r_s characters
+                     rather than waiting for a complete line of input,  unless
+                     EOF  is encountered or rreeaadd times out.  Delimiter charac-
+                     ters encountered in the input are not  treated  specially
+                     and  do  not cause rreeaadd to return until _n_c_h_a_r_s characters
+                     are read.  The result is not split on the  characters  in
+                     IIFFSS;  the intent is that the variable is assigned exactly
+                     the characters read (with the exception of backslash; see
+                     the --rr option below).
+              --pp _p_r_o_m_p_t
+                     Display _p_r_o_m_p_t on standard error, without a trailing new-
+                     line, before attempting to read any input.  The prompt is
+                     displayed only if input is coming from a terminal.
+              --rr     Backslash does not act as an escape character.  The back-
+                     slash is considered to be part of the line.  In  particu-
+                     lar,  a  backslash-newline pair may not then be used as a
+                     line continuation.
+              --ss     Silent mode.  If input is coming from a terminal, charac-
+                     ters are not echoed.
+              --tt _t_i_m_e_o_u_t
+                     Cause  rreeaadd  to time out and return failure if a complete
+                     line of input (or a specified number  of  characters)  is
+                     not  read within _t_i_m_e_o_u_t seconds.  _t_i_m_e_o_u_t may be a deci-
+                     mal number with a fractional portion following the  deci-
+                     mal  point.   This  option  is  only effective if rreeaadd is
+                     reading input from a terminal,  pipe,  or  other  special
+                     file;  it  has no effect when reading from regular files.
+                     If rreeaadd times out, rreeaadd saves any partial input read into
+                     the  specified  variable _n_a_m_e.  If _t_i_m_e_o_u_t is 0, rreeaadd re-
+                     turns immediately, without trying to read any data.   The
+                     exit  status  is 0 if input is available on the specified
+                     file descriptor, non-zero otherwise.  The exit status  is
+                     greater than 128 if the timeout is exceeded.
+              --uu _f_d  Read input from file descriptor _f_d.
+
+              If  no _n_a_m_e_s are supplied, the line read, without the ending de-
+              limiter but otherwise unmodified, is assigned  to  the  variable
+              RREEPPLLYY.   The  exit status is zero, unless end-of-file is encoun-
+              tered, rreeaadd times out (in which case the status is greater  than
+              128),  a variable assignment error (such as assigning to a read-
+              only variable) occurs, or an invalid file descriptor is supplied
+              as the argument to --uu.
+
+       rreeaaddoonnllyy [--aaAAff] [--pp] [_n_a_m_e[=_w_o_r_d] ...]
+              The  given  _n_a_m_e_s are marked readonly; the values of these _n_a_m_e_s
+              may not be changed by subsequent assignment.  If the  --ff  option
+              is  supplied,  the  functions  corresponding to the _n_a_m_e_s are so
+              marked.  The --aa option restricts the variables  to  indexed  ar-
+              rays;  the  --AA option restricts the variables to associative ar-
+              rays.  If both options are supplied, --AA takes precedence.  If no
+              _n_a_m_e  arguments  are  given,  or if the --pp option is supplied, a
+              list of all readonly names is printed.  The other options may be
+              used  to  restrict the output to a subset of the set of readonly
+              names.  The --pp option causes output to be displayed in a  format
+              that  may be reused as input.  If a variable name is followed by
+              =_w_o_r_d, the value of the variable is set  to  _w_o_r_d.   The  return
+              status  is 0 unless an invalid option is encountered, one of the
+              _n_a_m_e_s is not a valid shell variable name, or --ff is supplied with
+              a _n_a_m_e that is not a function.
+
+       rreettuurrnn [_n]
+              Causes  a function to stop executing and return the value speci-
+              fied by _n to its caller.  If _n is omitted, the return status  is
+              that  of the last command executed in the function body.  If rree--
+              ttuurrnn is executed by a trap handler, the last command used to de-
+              termine  the status is the last command executed before the trap
+              handler.  If rreettuurrnn is executed during a DDEEBBUUGG  trap,  the  last
+              command  used  to  determine the status is the last command exe-
+              cuted by the trap handler before rreettuurrnn was invoked.  If  rreettuurrnn
+              is  used outside a function, but during execution of a script by
+              the ..  (ssoouurrccee) command, it causes the shell to  stop  executing
+              that  script  and return either _n or the exit status of the last
+              command executed within the script as the  exit  status  of  the
+              script.  If _n is supplied, the return value is its least signif-
+              icant 8 bits.  The return status is non-zero if rreettuurrnn  is  sup-
+              plied  a non-numeric argument, or is used outside a function and
+              not during execution of a script by .. or  ssoouurrccee.   Any  command
+              associated with the RREETTUURRNN trap is executed before execution re-
+              sumes after the function or script.
+
+       sseett [----aabbeeffhhkkmmnnppttuuvvxxBBCCEEHHPPTT] [--oo _o_p_t_i_o_n_-_n_a_m_e] [_a_r_g ...]
+       sseett [++aabbeeffhhkkmmnnppttuuvvxxBBCCEEHHPPTT] [++oo _o_p_t_i_o_n_-_n_a_m_e] [_a_r_g ...]
+              Without options, the name and value of each shell  variable  are
+              displayed in a format that can be reused as input for setting or
+              resetting the currently-set variables.  Read-only variables can-
+              not  be  reset.  In _p_o_s_i_x _m_o_d_e, only shell variables are listed.
+              The output is sorted according to the current locale.  When  op-
+              tions  are  specified,  they set or unset shell attributes.  Any
+              arguments remaining after option processing are treated as  val-
+              ues for the positional parameters and are assigned, in order, to
+              $$11, $$22, ......  $$_n.  Options,  if  specified,  have  the  following
+              meanings:
+              --aa      Each variable or function that is created or modified is
+                      given the export attribute and marked for export to  the
+                      environment of subsequent commands.
+              --bb      Report  the status of terminated background jobs immedi-
+                      ately, rather than before the next primary prompt.  This
+                      is effective only when job control is enabled.
+              --ee      Exit  immediately  if a _p_i_p_e_l_i_n_e (which may consist of a
+                      single _s_i_m_p_l_e _c_o_m_m_a_n_d), a _l_i_s_t, or  a  _c_o_m_p_o_u_n_d  _c_o_m_m_a_n_d
+                      (see SSHHEELLLL GGRRAAMMMMAARR above), exits with a non-zero status.
+                      The shell does not exit if the  command  that  fails  is
+                      part  of  the command list immediately following a wwhhiillee
+                      or uunnttiill keyword, part of the test following the  iiff  or
+                      eelliiff  reserved  words, part of any command executed in a
+                      &&&& or |||| list except the command following the final  &&&&
+                      or ||||, any command in a pipeline but the last, or if the
+                      command's return value is being inverted with !!.   If  a
+                      compound  command  other  than a subshell returns a non-
+                      zero status because a command failed while --ee was  being
+                      ignored,  the  shell  does  not exit.  A trap on EERRRR, if
+                      set, is executed before the shell  exits.   This  option
+                      applies to the shell environment and each subshell envi-
+                      ronment separately (see  CCOOMMMMAANNDD  EEXXEECCUUTTIIOONN  EENNVVIIRROONNMMEENNTT
+                      above), and may cause subshells to exit before executing
+                      all the commands in the subshell.
+
+                      If a compound command or shell function  executes  in  a
+                      context  where --ee is being ignored, none of the commands
+                      executed within the compound command  or  function  body
+                      will  be  affected  by the --ee setting, even if --ee is set
+                      and a command returns a failure status.  If  a  compound
+                      command  or  shell function sets --ee while executing in a
+                      context where --ee is ignored, that setting will not  have
+                      any  effect  until  the  compound command or the command
+                      containing the function call completes.
+              --ff      Disable pathname expansion.
+              --hh      Remember the location of commands as they are looked  up
+                      for execution.  This is enabled by default.
+              --kk      All  arguments  in the form of assignment statements are
+                      placed in the environment for a command, not just  those
+                      that precede the command name.
+              --mm      Monitor  mode.   Job control is enabled.  This option is
+                      on by default for interactive  shells  on  systems  that
+                      support  it  (see JJOOBB CCOONNTTRROOLL above).  All processes run
+                      in a separate process group.  When a background job com-
+                      pletes, the shell prints a line containing its exit sta-
+                      tus.
+              --nn      Read commands but do not execute them.  This may be used
+                      to  check a shell script for syntax errors.  This is ig-
+                      nored by interactive shells.
+              --oo _o_p_t_i_o_n_-_n_a_m_e
+                      The _o_p_t_i_o_n_-_n_a_m_e can be one of the following:
+                      aalllleexxppoorrtt
+                              Same as --aa.
+                      bbrraacceeeexxppaanndd
+                              Same as --BB.
+                      eemmaaccss   Use an emacs-style command line  editing  inter-
+                              face.  This is enabled by default when the shell
+                              is interactive, unless the shell is started with
+                              the  ----nnooeeddiittiinngg  option.  This also affects the
+                              editing interface used for rreeaadd --ee.
+                      eerrrreexxiitt Same as --ee.
+                      eerrrrttrraaccee
+                              Same as --EE.
+                      ffuunnccttrraaccee
+                              Same as --TT.
+                      hhaasshhaallll Same as --hh.
+                      hhiisstteexxppaanndd
+                              Same as --HH.
+                      hhiissttoorryy Enable command history, as described above under
+                              HHIISSTTOORRYY.  This option is on by default in inter-
+                              active shells.
+                      iiggnnoorreeeeooff
+                              The effect is as  if  the  shell  command  ``IG-
+                              NOREEOF=10''  had been executed (see SShheellll VVaarrii--
+                              aabblleess above).
+                      kkeeyywwoorrdd Same as --kk.
+                      mmoonniittoorr Same as --mm.
+                      nnoocclloobbbbeerr
+                              Same as --CC.
+                      nnooeexxeecc  Same as --nn.
+                      nnoogglloobb  Same as --ff.
+                      nnoolloogg   Currently ignored.
+                      nnoottiiffyy  Same as --bb.
+                      nnoouunnsseett Same as --uu.
+                      oonneeccmmdd  Same as --tt.
+                      pphhyyssiiccaall
+                              Same as --PP.
+                      ppiippeeffaaiill
+                              If set, the return value of a  pipeline  is  the
+                              value  of  the  last (rightmost) command to exit
+                              with a non-zero status, or zero if all  commands
+                              in  the pipeline exit successfully.  This option
+                              is disabled by default.
+                      ppoossiixx   Change the behavior of bbaasshh  where  the  default
+                              operation  differs  from  the  POSIX standard to
+                              match the standard (_p_o_s_i_x _m_o_d_e).  See  SSEEEE  AALLSSOO
+                              below for a reference to a document that details
+                              how posix mode affects bash's behavior.
+                      pprriivviilleeggeedd
+                              Same as --pp.
+                      vveerrbboossee Same as --vv.
+                      vvii      Use a vi-style command line  editing  interface.
+                              This also affects the editing interface used for
+                              rreeaadd --ee.
+                      xxttrraaccee  Same as --xx.
+                      If --oo is supplied with no _o_p_t_i_o_n_-_n_a_m_e, the values of the
+                      current  options are printed.  If ++oo is supplied with no
+                      _o_p_t_i_o_n_-_n_a_m_e, a series of sseett commands  to  recreate  the
+                      current  option  settings  is  displayed on the standard
+                      output.
+              --pp      Turn on _p_r_i_v_i_l_e_g_e_d mode.  In this  mode,  the  $$EENNVV  and
+                      $$BBAASSHH__EENNVV  files  are not processed, shell functions are
+                      not inherited from the environment, and  the  SSHHEELLLLOOPPTTSS,
+                      BBAASSHHOOPPTTSS,  CCDDPPAATTHH, and GGLLOOBBIIGGNNOORREE variables, if they ap-
+                      pear in the environment, are ignored.  If the  shell  is
+                      started  with the effective user (group) id not equal to
+                      the real user (group) id, and the --pp option is not  sup-
+                      plied, these actions are taken and the effective user id
+                      is set to the real user id.  If the --pp  option  is  sup-
+                      plied  at  startup,  the effective user id is not reset.
+                      Turning this option off causes the  effective  user  and
+                      group ids to be set to the real user and group ids.
+              --tt      Exit after reading and executing one command.
+              --uu      Treat unset variables and parameters other than the spe-
+                      cial parameters "@" and "*" as an error when  performing
+                      parameter  expansion.   If  expansion is attempted on an
+                      unset variable or parameter, the shell prints  an  error
+                      message,  and, if not interactive, exits with a non-zero
+                      status.
+              --vv      Print shell input lines as they are read.
+              --xx      After expanding each _s_i_m_p_l_e _c_o_m_m_a_n_d, ffoorr  command,  ccaassee
+                      command, sseelleecctt command, or arithmetic ffoorr command, dis-
+                      play the expanded value of PPSS44, followed by the  command
+                      and its expanded arguments or associated word list.
+              --BB      The  shell performs brace expansion (see BBrraaccee EExxppaannssiioonn
+                      above).  This is on by default.
+              --CC      If set, bbaasshh does not overwrite an  existing  file  with
+                      the  >>,  >>&&,  and <<>> redirection operators.  This may be
+                      overridden when creating output files by using the redi-
+                      rection operator >>|| instead of >>.
+              --EE      If set, any trap on EERRRR is inherited by shell functions,
+                      command substitutions, and commands executed in  a  sub-
+                      shell  environment.  The EERRRR trap is normally not inher-
+                      ited in such cases.
+              --HH      Enable !!  style history substitution.  This option is on
+                      by default when the shell is interactive.
+              --PP      If  set,  the shell does not resolve symbolic links when
+                      executing commands such as ccdd that  change  the  current
+                      working  directory.   It  uses  the  physical  directory
+                      structure instead.  By default, bbaasshh follows the logical
+                      chain  of  directories  when  performing  commands which
+                      change the current directory.
+              --TT      If set, any traps on DDEEBBUUGG and RREETTUURRNN are  inherited  by
+                      shell functions, command substitutions, and commands ex-
+                      ecuted in a subshell environment.  The DDEEBBUUGG and  RREETTUURRNN
+                      traps are normally not inherited in such cases.
+              ----      If  no arguments follow this option, then the positional
+                      parameters are unset.  Otherwise, the positional parame-
+                      ters  are  set  to  the _a_r_gs, even if some of them begin
+                      with a --.
+              --       Signal the end of options, cause all remaining  _a_r_gs  to
+                      be assigned to the positional parameters.  The --xx and --vv
+                      options are turned off.  If there are no _a_r_gs, the posi-
+                      tional parameters remain unchanged.
+
+              The  options are off by default unless otherwise noted.  Using +
+              rather than - causes these options to be turned  off.   The  op-
+              tions can also be specified as arguments to an invocation of the
+              shell.  The current set of options may be found in $$--.  The  re-
+              turn  status  is always true unless an invalid option is encoun-
+              tered.
+
+       sshhiifftt [_n]
+              The positional parameters from _n+1 ... are renamed  to  $$11  ........
+              Parameters  represented by the numbers $$## down to $$##-_n+1 are un-
+              set.  _n must be a non-negative number less than or equal to  $$##.
+              If  _n is 0, no parameters are changed.  If _n is not given, it is
+              assumed to be 1.  If _n is greater than $$##, the positional param-
+              eters  are  not changed.  The return status is greater than zero
+              if _n is greater than $$## or less than zero; otherwise 0.
+
+       sshhoopptt [--ppqqssuu] [--oo] [_o_p_t_n_a_m_e ...]
+              Toggle the values of settings controlling optional shell  behav-
+              ior.   The settings can be either those listed below, or, if the
+              --oo option is used, those available with the --oo option to the sseett
+              builtin command.  With no options, or with the --pp option, a list
+              of all settable options is  displayed,  with  an  indication  of
+              whether or not each is set; if _o_p_t_n_a_m_e_s are supplied, the output
+              is restricted to those options.  The --pp option causes output  to
+              be  displayed  in a form that may be reused as input.  Other op-
+              tions have the following meanings:
+              --ss     Enable (set) each _o_p_t_n_a_m_e.
+              --uu     Disable (unset) each _o_p_t_n_a_m_e.
+              --qq     Suppresses normal output (quiet mode); the return  status
+                     indicates whether the _o_p_t_n_a_m_e is set or unset.  If multi-
+                     ple _o_p_t_n_a_m_e arguments are given with --qq, the return  sta-
+                     tus  is zero if all _o_p_t_n_a_m_e_s are enabled; non-zero other-
+                     wise.
+              --oo     Restricts the values of _o_p_t_n_a_m_e to be those  defined  for
+                     the --oo option to the sseett builtin.
+
+              If  either  --ss  or  --uu  is used with no _o_p_t_n_a_m_e arguments, sshhoopptt
+              shows only those options which are set or  unset,  respectively.
+              Unless  otherwise  noted, the sshhoopptt options are disabled (unset)
+              by default.
+
+              The return status when listing options is zero if  all  _o_p_t_n_a_m_e_s
+              are  enabled, non-zero otherwise.  When setting or unsetting op-
+              tions, the return status is zero unless  an  _o_p_t_n_a_m_e  is  not  a
+              valid shell option.
+
+              The list of sshhoopptt options is:
+
+              aassssoocc__eexxppaanndd__oonnccee
+                      If  set, the shell suppresses multiple evaluation of as-
+                      sociative array subscripts during arithmetic  expression
+                      evaluation,  while  executing  builtins that can perform
+                      variable assignments, and while executing builtins  that
+                      perform array dereferencing.
+              aauuttooccdd  If  set,  a command name that is the name of a directory
+                      is executed as if it were the argument to  the  ccdd  com-
+                      mand.  This option is only used by interactive shells.
+              ccddaabbllee__vvaarrss
+                      If  set,  an  argument to the ccdd builtin command that is
+                      not a directory is assumed to be the name of a  variable
+                      whose value is the directory to change to.
+              ccddssppeellll If set, minor errors in the spelling of a directory com-
+                      ponent in a ccdd command will be  corrected.   The  errors
+                      checked for are transposed characters, a missing charac-
+                      ter, and one character too many.   If  a  correction  is
+                      found,  the  corrected filename is printed, and the com-
+                      mand proceeds.  This option is only used by  interactive
+                      shells.
+              cchheecckkhhaasshh
+                      If set, bbaasshh checks that a command found in the hash ta-
+                      ble exists before trying to execute  it.   If  a  hashed
+                      command  no  longer exists, a normal path search is per-
+                      formed.
+              cchheecckkjjoobbss
+                      If set, bbaasshh lists the status of any stopped and running
+                      jobs  before  exiting an interactive shell.  If any jobs
+                      are running, this causes the exit to be deferred until a
+                      second  exit is attempted without an intervening command
+                      (see JJOOBB CCOONNTTRROOLL above).  The shell always postpones ex-
+                      iting if any jobs are stopped.
+              cchheecckkwwiinnssiizzee
+                      If  set, bbaasshh checks the window size after each external
+                      (non-builtin) command and,  if  necessary,  updates  the
+                      values  of LLIINNEESS and CCOOLLUUMMNNSS.  This option is enabled by
+                      default.
+              ccmmddhhiisstt If set, bbaasshh attempts to save all lines of  a  multiple-
+                      line  command  in  the  same history entry.  This allows
+                      easy re-editing of multi-line commands.  This option  is
+                      enabled  by  default,  but only has an effect if command
+                      history is enabled, as described above under HHIISSTTOORRYY.
+              ccoommppaatt3311
+              ccoommppaatt3322
+              ccoommppaatt4400
+              ccoommppaatt4411
+              ccoommppaatt4422
+              ccoommppaatt4433
+              ccoommppaatt4444
+                      These control aspects of the shell's compatibility  mode
+                      (see SSHHEELLLL CCOOMMPPAATTIIBBIILLIITTYY MMOODDEE below).
+
+              ccoommpplleettee__ffuullllqquuoottee
+                      If  set,  bbaasshh  quotes all shell metacharacters in file-
+                      names and directory names  when  performing  completion.
+                      If not set, bbaasshh removes metacharacters such as the dol-
+                      lar sign from the set of characters that will be  quoted
+                      in  completed filenames when these metacharacters appear
+                      in shell variable references in words to  be  completed.
+                      This  means that dollar signs in variable names that ex-
+                      pand to directories will not  be  quoted;  however,  any
+                      dollar  signs appearing in filenames will not be quoted,
+                      either.  This is active only when bash  is  using  back-
+                      slashes  to quote completed filenames.  This variable is
+                      set by default, which is the default  bash  behavior  in
+                      versions through 4.2.
+
+              ddiirreexxppaanndd
+                      If  set,  bbaasshh replaces directory names with the results
+                      of word expansion when performing  filename  completion.
+                      This  changes  the contents of the readline editing buf-
+                      fer.  If not set, bbaasshh attempts  to  preserve  what  the
+                      user typed.
+
+              ddiirrssppeellll
+                      If  set,  bbaasshh attempts spelling correction on directory
+                      names during word completion if the directory name  ini-
+                      tially supplied does not exist.
+
+              ddoottgglloobb If  set, bbaasshh includes filenames beginning with a `.' in
+                      the results of pathname expansion.  The filenames  ````..''''
+                      and  ````....''''   must always be matched explicitly, even if
+                      ddoottgglloobb is set.
+
+              eexxeeccffaaiill
+                      If set, a non-interactive shell will not exit if it can-
+                      not  execute  the  file  specified as an argument to the
+                      eexxeecc builtin command.  An  interactive  shell  does  not
+                      exit if eexxeecc fails.
+
+              eexxppaanndd__aalliiaasseess
+                      If  set,  aliases  are expanded as described above under
+                      AALLIIAASSEESS.  This option is enabled by default for interac-
+                      tive shells.
+
+              eexxttddeebbuugg
+                      If  set at shell invocation, or in a shell startup file,
+                      arrange to execute the debugger profile before the shell
+                      starts,  identical to the ----ddeebbuuggggeerr option.  If set af-
+                      ter invocation, behavior intended for use  by  debuggers
+                      is enabled:
+
+                      11..     The --FF option to the ddeeccllaarree builtin displays the
+                             source file name and line number corresponding to
+                             each function name supplied as an argument.
+
+                      22..     If  the  command  run by the DDEEBBUUGG trap returns a
+                             non-zero value, the next command is  skipped  and
+                             not executed.
+
+                      33..     If  the  command  run by the DDEEBBUUGG trap returns a
+                             value of 2, and the shell is executing in a  sub-
+                             routine  (a shell function or a shell script exe-
+                             cuted by the .. or  ssoouurrccee  builtins),  the  shell
+                             simulates a call to rreettuurrnn.
+
+                      44..     BBAASSHH__AARRGGCC  and BBAASSHH__AARRGGVV are updated as described
+                             in their descriptions above.
+
+                      55..     Function tracing is  enabled:  command  substitu-
+                             tion, shell functions, and subshells invoked with
+                             (( _c_o_m_m_a_n_d )) inherit the DDEEBBUUGG and RREETTUURRNN traps.
+
+                      66..     Error tracing is enabled:  command  substitution,
+                             shell  functions,  and  subshells  invoked with ((
+                             _c_o_m_m_a_n_d )) inherit the EERRRR trap.
+
+              eexxttgglloobb If set, the extended pattern matching features described
+                      above under PPaatthhnnaammee EExxppaannssiioonn are enabled.
+
+              eexxttqquuoottee
+                      If  set,  $$'_s_t_r_i_n_g'  and  $$"_s_t_r_i_n_g" quoting is performed
+                      within  $${{_p_a_r_a_m_e_t_e_r}}  expansions  enclosed   in   double
+                      quotes.  This option is enabled by default.
+
+              ffaaiillgglloobb
+                      If  set,  patterns  which fail to match filenames during
+                      pathname expansion result in an expansion error.
+
+              ffoorrccee__ffiiggnnoorree
+                      If set, the suffixes  specified  by  the  FFIIGGNNOORREE  shell
+                      variable  cause words to be ignored when performing word
+                      completion even if the ignored words are the only possi-
+                      ble  completions.   See  SSHHEELLLL VVAARRIIAABBLLEESS above for a de-
+                      scription of FFIIGGNNOORREE.  This option  is  enabled  by  de-
+                      fault.
+
+              gglloobbaasscciiiirraannggeess
+                      If  set,  range  expressions  used  in  pattern matching
+                      bracket expressions (see PPaatttteerrnn MMaattcchhiinngg above)  behave
+                      as  if  in the traditional C locale when performing com-
+                      parisons.  That is, the current locale's  collating  se-
+                      quence  is not taken into account, so bb will not collate
+                      between AA and BB, and  upper-case  and  lower-case  ASCII
+                      characters will collate together.
+
+              gglloobbssttaarr
+                      If set, the pattern **** used in a pathname expansion con-
+                      text will match all files and zero or  more  directories
+                      and  subdirectories.  If the pattern is followed by a //,
+                      only directories and subdirectories match.
+
+              ggnnuu__eerrrrffmmtt
+                      If set, shell error messages are written in the standard
+                      GNU error message format.
+
+              hhiissttaappppeenndd
+                      If  set,  the history list is appended to the file named
+                      by the value of the HHIISSTTFFIILLEE variable when the shell ex-
+                      its, rather than overwriting the file.
+
+              hhiissttrreeeeddiitt
+                      If  set, and rreeaaddlliinnee is being used, a user is given the
+                      opportunity to re-edit a failed history substitution.
+
+              hhiissttvveerriiffyy
+                      If set, and rreeaaddlliinnee is being used, the results of  his-
+                      tory  substitution  are  not  immediately  passed to the
+                      shell parser.  Instead, the  resulting  line  is  loaded
+                      into the rreeaaddlliinnee editing buffer, allowing further modi-
+                      fication.
+
+              hhoossttccoommpplleettee
+                      If set, and rreeaaddlliinnee is being used, bbaasshh will attempt to
+                      perform  hostname  completion when a word containing a @@
+                      is  being  completed  (see  CCoommpplleettiinngg  under   RREEAADDLLIINNEE
+                      above).  This is enabled by default.
+
+              hhuuppoonneexxiitt
+                      If set, bbaasshh will send SSIIGGHHUUPP to all jobs when an inter-
+                      active login shell exits.
+
+              iinnhheerriitt__eerrrreexxiitt
+                      If set, command substitution inherits the value  of  the
+                      eerrrreexxiitt  option, instead of unsetting it in the subshell
+                      environment.  This option is enabled when _p_o_s_i_x _m_o_d_e  is
+                      enabled.
+
+              iinntteerraaccttiivvee__ccoommmmeennttss
+                      If set, allow a word beginning with ## to cause that word
+                      and all remaining characters on that line to be  ignored
+                      in  an interactive shell (see CCOOMMMMEENNTTSS above).  This op-
+                      tion is enabled by default.
+
+              llaassttppiippee
+                      If set, and job control is not active,  the  shell  runs
+                      the last command of a pipeline not executed in the back-
+                      ground in the current shell environment.
+
+              lliitthhiisstt If set, and the ccmmddhhiisstt option  is  enabled,  multi-line
+                      commands are saved to the history with embedded newlines
+                      rather than using semicolon separators where possible.
+
+              llooccaallvvaarr__iinnhheerriitt
+                      If set, local variables inherit the value and attributes
+                      of a variable of the same name that exists at a previous
+                      scope before any new value is assigned.  The nameref at-
+                      tribute is not inherited.
+
+              llooccaallvvaarr__uunnsseett
+                      If  set,  calling  uunnsseett  on local variables in previous
+                      function scopes marks them so  subsequent  lookups  find
+                      them  unset until that function returns. This is identi-
+                      cal to the behavior of unsetting local variables at  the
+                      current function scope.
+
+              llooggiinn__sshheellll
+                      The  shell  sets this option if it is started as a login
+                      shell (see IINNVVOOCCAATTIIOONN above).   The  value  may  not  be
+                      changed.
+
+              mmaaiillwwaarrnn
+                      If  set,  and  a file that bbaasshh is checking for mail has
+                      been accessed since the last time it  was  checked,  the
+                      message  ``The  mail in _m_a_i_l_f_i_l_e has been read'' is dis-
+                      played.
+
+              nnoo__eemmppttyy__ccmmdd__ccoommpplleettiioonn
+                      If set, and rreeaaddlliinnee is being used, bbaasshh  will  not  at-
+                      tempt  to  search the PPAATTHH for possible completions when
+                      completion is attempted on an empty line.
+
+              nnooccaasseegglloobb
+                      If set, bbaasshh matches  filenames  in  a  case-insensitive
+                      fashion when performing pathname expansion (see PPaatthhnnaammee
+                      EExxppaannssiioonn above).
+
+              nnooccaasseemmaattcchh
+                      If set, bbaasshh  matches  patterns  in  a  case-insensitive
+                      fashion when performing matching while executing ccaassee or
+                      [[[[ conditional commands, when performing pattern substi-
+                      tution  word expansions, or when filtering possible com-
+                      pletions as part of programmable completion.
+
+              nnuullllgglloobb
+                      If set, bbaasshh allows patterns which match no  files  (see
+                      PPaatthhnnaammee  EExxppaannssiioonn  above)  to expand to a null string,
+                      rather than themselves.
+
+              pprrooggccoommpp
+                      If set, the programmable completion facilities (see PPrroo--
+                      ggrraammmmaabbllee CCoommpplleettiioonn above) are enabled.  This option is
+                      enabled by default.
+
+              pprrooggccoommpp__aalliiaass
+                      If set, and programmable  completion  is  enabled,  bbaasshh
+                      treats  a command name that doesn't have any completions
+                      as a possible alias and attempts alias expansion. If  it
+                      has  an alias, bbaasshh attempts programmable completion us-
+                      ing the command word resulting from the expanded alias.
+
+              pprroommppttvvaarrss
+                      If set, prompt strings undergo parameter expansion, com-
+                      mand  substitution,  arithmetic expansion, and quote re-
+                      moval after being expanded  as  described  in  PPRROOMMPPTTIINNGG
+                      above.  This option is enabled by default.
+
+              rreessttrriicctteedd__sshheellll
+                      The  shell  sets  this  option  if  it is started in re-
+                      stricted mode (see RREESSTTRRIICCTTEEDD SSHHEELLLL below).   The  value
+                      may  not be changed.  This is not reset when the startup
+                      files are executed, allowing the startup files  to  dis-
+                      cover whether or not a shell is restricted.
+
+              sshhiifftt__vveerrbboossee
+                      If  set,  the sshhiifftt builtin prints an error message when
+                      the shift count exceeds the number of positional parame-
+                      ters.
+
+              ssoouurrcceeppaatthh
+                      If set, the ssoouurrccee (..) builtin uses the value of PPAATTHH to
+                      find the directory containing the file  supplied  as  an
+                      argument.  This option is enabled by default.
+
+              xxppgg__eecchhoo
+                      If  set,  the  eecchhoo builtin expands backslash-escape se-
+                      quences by default.
+
+       ssuussppeenndd [--ff]
+              Suspend the execution of this shell until it receives a  SSIIGGCCOONNTT
+              signal.  A login shell cannot be suspended; the --ff option can be
+              used to override this and force the suspension.  The return sta-
+              tus  is  0  unless the shell is a login shell and --ff is not sup-
+              plied, or if job control is not enabled.
+
+       tteesstt _e_x_p_r
+       [[ _e_x_p_r ]]
+              Return a status of 0 (true) or 1 (false) depending on the evalu-
+              ation of the conditional expression _e_x_p_r.  Each operator and op-
+              erand must be a separate argument.  Expressions are composed  of
+              the  primaries  described  above  under CCOONNDDIITTIIOONNAALL EEXXPPRREESSSSIIOONNSS.
+              tteesstt does not accept any options, nor does it accept and  ignore
+              an argument of ---- as signifying the end of options.
+
+              Expressions  may  be  combined  using  the  following operators,
+              listed in decreasing order of precedence.   The  evaluation  de-
+              pends  on  the  number of arguments; see below.  Operator prece-
+              dence is used when there are five or more arguments.
+              !! _e_x_p_r True if _e_x_p_r is false.
+              (( _e_x_p_r ))
+                     Returns the value of _e_x_p_r.  This may be used to  override
+                     the normal precedence of operators.
+              _e_x_p_r_1 -aa _e_x_p_r_2
+                     True if both _e_x_p_r_1 and _e_x_p_r_2 are true.
+              _e_x_p_r_1 -oo _e_x_p_r_2
+                     True if either _e_x_p_r_1 or _e_x_p_r_2 is true.
+
+              tteesstt and [[ evaluate conditional expressions using a set of rules
+              based on the number of arguments.
+
+              0 arguments
+                     The expression is false.
+              1 argument
+                     The expression is true if and only if the argument is not
+                     null.
+              2 arguments
+                     If the first argument is !!, the expression is true if and
+                     only if the second argument is null.  If the first  argu-
+                     ment  is  one  of  the unary conditional operators listed
+                     above under CCOONNDDIITTIIOONNAALL EEXXPPRREESSSSIIOONNSS,  the  expression  is
+                     true if the unary test is true.  If the first argument is
+                     not a valid unary conditional operator, the expression is
+                     false.
+              3 arguments
+                     The following conditions are applied in the order listed.
+                     If the second argument is one of the  binary  conditional
+                     operators listed above under CCOONNDDIITTIIOONNAALL EEXXPPRREESSSSIIOONNSS, the
+                     result of the expression is the result of the binary test
+                     using  the first and third arguments as operands.  The --aa
+                     and --oo operators are  considered  binary  operators  when
+                     there  are  three arguments.  If the first argument is !!,
+                     the value is the negation of the two-argument test  using
+                     the second and third arguments.  If the first argument is
+                     exactly (( and the third argument is exactly )), the result
+                     is  the one-argument test of the second argument.  Other-
+                     wise, the expression is false.
+              4 arguments
+                     If the first argument is !!, the result is the negation of
+                     the  three-argument  expression composed of the remaining
+                     arguments.  Otherwise, the expression is parsed and eval-
+                     uated  according  to  precedence  using  the rules listed
+                     above.
+              5 or more arguments
+                     The expression  is  parsed  and  evaluated  according  to
+                     precedence using the rules listed above.
+
+              When  used  with  tteesstt  or [[, the << and >> operators sort lexico-
+              graphically using ASCII ordering.
+
+       ttiimmeess  Print the accumulated user and system times for  the  shell  and
+              for processes run from the shell.  The return status is 0.
+
+       ttrraapp [--llpp] [[_a_r_g] _s_i_g_s_p_e_c ...]
+              The  command  _a_r_g  is to be read and executed when the shell re-
+              ceives signal(s) _s_i_g_s_p_e_c.  If _a_r_g is absent (and there is a sin-
+              gle  _s_i_g_s_p_e_c) or --, each specified signal is reset to its origi-
+              nal disposition (the value it had upon entrance to  the  shell).
+              If  _a_r_g  is the null string the signal specified by each _s_i_g_s_p_e_c
+              is ignored by the shell and by the commands it invokes.  If  _a_r_g
+              is  not present and --pp has been supplied, then the trap commands
+              associated with each _s_i_g_s_p_e_c are displayed.  If no arguments are
+              supplied  or  if  only --pp is given, ttrraapp prints the list of com-
+              mands associated with each signal.  The  --ll  option  causes  the
+              shell  to  print  a list of signal names and their corresponding
+              numbers.  Each _s_i_g_s_p_e_c is either a signal name defined in  <_s_i_g_-
+              _n_a_l_._h>,  or  a signal number.  Signal names are case insensitive
+              and the SSIIGG prefix is optional.
+
+              If a _s_i_g_s_p_e_c is EEXXIITT (0) the command _a_r_g  is  executed  on  exit
+              from  the shell.  If a _s_i_g_s_p_e_c is DDEEBBUUGG, the command _a_r_g is exe-
+              cuted before every _s_i_m_p_l_e _c_o_m_m_a_n_d, _f_o_r  command,  _c_a_s_e  command,
+              _s_e_l_e_c_t  command,  every  arithmetic  _f_o_r command, and before the
+              first command executes in a shell function  (see  SSHHEELLLL  GGRRAAMMMMAARR
+              above).   Refer to the description of the eexxttddeebbuugg option to the
+              sshhoopptt builtin for details of its effect on the DDEEBBUUGG trap.  If a
+              _s_i_g_s_p_e_c is RREETTUURRNN, the command _a_r_g is executed each time a shell
+              function or a script executed with the .. or ssoouurrccee builtins fin-
+              ishes executing.
+
+              If  a  _s_i_g_s_p_e_c  is  EERRRR,  the command _a_r_g is executed whenever a
+              pipeline (which may consist of a single simple command), a list,
+              or a compound command returns a non-zero exit status, subject to
+              the following conditions.  The EERRRR trap is not executed  if  the
+              failed command is part of the command list immediately following
+              a wwhhiillee or uunnttiill keyword, part of the test in an  _i_f  statement,
+              part of a command executed in a &&&& or |||| list except the command
+              following the final &&&& or ||||, any command in a pipeline but  the
+              last,  or  if the command's return value is being inverted using
+              !!.  These are the same conditions obeyed by the eerrrreexxiitt (--ee) op-
+              tion.
+
+              Signals ignored upon entry to the shell cannot be trapped or re-
+              set.  Trapped signals that are not being ignored  are  reset  to
+              their original values in a subshell or subshell environment when
+              one is created.  The return status is false if  any  _s_i_g_s_p_e_c  is
+              invalid; otherwise ttrraapp returns true.
+
+       ttyyppee [--aaffttppPP] _n_a_m_e [_n_a_m_e ...]
+              With  no options, indicate how each _n_a_m_e would be interpreted if
+              used as a command name.  If the --tt option is used, ttyyppee prints a
+              string  which  is  one  of _a_l_i_a_s, _k_e_y_w_o_r_d, _f_u_n_c_t_i_o_n, _b_u_i_l_t_i_n, or
+              _f_i_l_e if  _n_a_m_e  is  an  alias,  shell  reserved  word,  function,
+              builtin,  or disk file, respectively.  If the _n_a_m_e is not found,
+              then nothing is printed, and an exit  status  of  false  is  re-
+              turned.   If the --pp option is used, ttyyppee either returns the name
+              of the disk file that would be executed if _n_a_m_e  were  specified
+              as  a command name, or nothing if ``type -t name'' would not re-
+              turn _f_i_l_e.  The --PP option forces a PPAATTHH search  for  each  _n_a_m_e,
+              even if ``type -t name'' would not return _f_i_l_e.  If a command is
+              hashed, --pp and --PP print the hashed value, which is not necessar-
+              ily  the  file  that appears first in PPAATTHH.  If the --aa option is
+              used, ttyyppee prints all of the places that contain  an  executable
+              named _n_a_m_e.  This includes aliases and functions, if and only if
+              the --pp option is not also used.  The table of hashed commands is
+              not  consulted  when  using  --aa.  The --ff option suppresses shell
+              function lookup, as with the ccoommmmaanndd builtin.  ttyyppee returns true
+              if all of the arguments are found, false if any are not found.
+
+       uulliimmiitt [--HHSS] --aa
+       uulliimmiitt [--HHSS] [--bbccddeeffiikkllmmnnppqqrrssttuuvvxxPPRRTT [_l_i_m_i_t]]
+              Provides  control  over the resources available to the shell and
+              to processes started by it, on systems that allow such  control.
+              The --HH and --SS options specify that the hard or soft limit is set
+              for the given resource.  A hard limit cannot be increased  by  a
+              non-root  user  once it is set; a soft limit may be increased up
+              to the value of the hard limit.  If neither --HH nor --SS is  speci-
+              fied, both the soft and hard limits are set.  The value of _l_i_m_i_t
+              can be a number in the unit specified for the resource or one of
+              the special values hhaarrdd, ssoofftt, or uunnlliimmiitteedd, which stand for the
+              current hard limit, the current soft limit, and  no  limit,  re-
+              spectively.   If _l_i_m_i_t is omitted, the current value of the soft
+              limit of the resource is printed, unless the --HH option is given.
+              When  more  than  one  resource is specified, the limit name and
+              unit, if appropriate, are printed before the value.   Other  op-
+              tions are interpreted as follows:
+              --aa     All current limits are reported; no limits are set
+              --bb     The maximum socket buffer size
+              --cc     The maximum size of core files created
+              --dd     The maximum size of a process's data segment
+              --ee     The maximum scheduling priority ("nice")
+              --ff     The  maximum  size  of files written by the shell and its
+                     children
+              --ii     The maximum number of pending signals
+              --kk     The maximum number of kqueues that may be allocated
+              --ll     The maximum size that may be locked into memory
+              --mm     The maximum resident set size (many systems do not  honor
+                     this limit)
+              --nn     The maximum number of open file descriptors (most systems
+                     do not allow this value to be set)
+              --pp     The pipe size in 512-byte blocks (this may not be set)
+              --qq     The maximum number of bytes in POSIX message queues
+              --rr     The maximum real-time scheduling priority
+              --ss     The maximum stack size
+              --tt     The maximum amount of cpu time in seconds
+              --uu     The maximum number of processes  available  to  a  single
+                     user
+              --vv     The  maximum  amount  of  virtual memory available to the
+                     shell and, on some systems, to its children
+              --xx     The maximum number of file locks
+              --PP     The maximum number of pseudoterminals
+              --RR     The maximum time  a  real-time  process  can  run  before
+                     blocking, in microseconds
+              --TT     The maximum number of threads
+
+              If  _l_i_m_i_t  is given, and the --aa option is not used, _l_i_m_i_t is the
+              new value of the specified resource.  If  no  option  is  given,
+              then  --ff is assumed.  Values are in 1024-byte increments, except
+              for --tt, which is in seconds; --RR, which is in  microseconds;  --pp,
+              which  is  in  units of 512-byte blocks; --PP, --TT, --bb, --kk, --nn, and
+              --uu, which are unscaled values; and, when in posix mode,  --cc  and
+              --ff,  which  are  in 512-byte increments.  The return status is 0
+              unless an invalid option or argument is supplied,  or  an  error
+              occurs while setting a new limit.
+
+       uummaasskk [--pp] [--SS] [_m_o_d_e]
+              The user file-creation mask is set to _m_o_d_e.  If _m_o_d_e begins with
+              a digit, it is interpreted as an octal number; otherwise  it  is
+              interpreted  as a symbolic mode mask similar to that accepted by
+              _c_h_m_o_d(1).  If _m_o_d_e is omitted, the current value of the mask  is
+              printed.   The  --SS  option causes the mask to be printed in sym-
+              bolic form; the default output is an octal number.   If  the  --pp
+              option is supplied, and _m_o_d_e is omitted, the output is in a form
+              that may be reused as input.  The return status is 0 if the mode
+              was  successfully  changed  or if no _m_o_d_e argument was supplied,
+              and false otherwise.
+
+       uunnaalliiaass [-aa] [_n_a_m_e ...]
+              Remove each _n_a_m_e from the list of defined  aliases.   If  --aa  is
+              supplied,  all  alias definitions are removed.  The return value
+              is true unless a supplied _n_a_m_e is not a defined alias.
+
+       uunnsseett [-ffvv] [-nn] [_n_a_m_e ...]
+              For each _n_a_m_e, remove the corresponding  variable  or  function.
+              If the --vv option is given, each _n_a_m_e refers to a shell variable,
+              and that variable is removed.  Read-only variables  may  not  be
+              unset.   If  --ff  is specified, each _n_a_m_e refers to a shell func-
+              tion, and the function definition is removed.  If the --nn  option
+              is  supplied, and _n_a_m_e is a variable with the _n_a_m_e_r_e_f attribute,
+              _n_a_m_e will be unset rather than the variable it  references.   --nn
+              has  no  effect if the --ff option is supplied.  If no options are
+              supplied, each _n_a_m_e refers to a variable; if there is  no  vari-
+              able  by that name, a function with that name, if any, is unset.
+              Each unset variable or function is removed from the  environment
+              passed   to   subsequent  commands.   If  any  of  BBAASSHH__AALLIIAASSEESS,
+              BBAASSHH__AARRGGVV00,  BBAASSHH__CCMMDDSS,  BBAASSHH__CCOOMMMMAANNDD,  BBAASSHH__SSUUBBSSHHEELLLL,  BBAASSHHPPIIDD,
+              CCOOMMPP__WWOORRDDBBRREEAAKKSS,  DDIIRRSSTTAACCKK,  EEPPOOCCHHRREEAALLTTIIMMEE,  EEPPOOCCHHSSEECCOONNDDSS, FFUUNNCC--
+              NNAAMMEE, GGRROOUUPPSS, HHIISSTTCCMMDD, LLIINNEENNOO, RRAANNDDOOMM, SSEECCOONNDDSS, or  SSRRAANNDDOOMM  are
+              unset, they lose their special properties, even if they are sub-
+              sequently reset.  The exit status is true unless a _n_a_m_e is read-
+              only.
+
+       wwaaiitt [--ffnn] [--pp _v_a_r_n_a_m_e] [_i_d _._._.]
+              Wait for each specified child process and return its termination
+              status.  Each _i_d may be a process ID or a job specification;  if
+              a  job  spec  is given, all processes in that job's pipeline are
+              waited for.  If _i_d is not given,  wwaaiitt  waits  for  all  running
+              background  jobs  and the last-executed process substitution, if
+              its process id is the same as $$!!, and the return status is zero.
+              If  the  --nn option is supplied, wwaaiitt waits for a single job from
+              the list of _i_ds or, if no _i_ds are supplied, any job, to complete
+              and  returns its exit status.  If none of the supplied arguments
+              is a child of the shell, or if no arguments are supplied and the
+              shell  has no unwaited-for children, the exit status is 127.  If
+              the --pp option is supplied, the process or job identifier of  the
+              job  for  which  the  exit status is returned is assigned to the
+              variable _v_a_r_n_a_m_e named by the  option  argument.   The  variable
+              will  be unset initially, before any assignment.  This is useful
+              only when the --nn option is supplied.  Supplying the  --ff  option,
+              when  job control is enabled, forces wwaaiitt to wait for _i_d to ter-
+              minate before returning its status, instead of returning when it
+              changes  status.  If _i_d specifies a non-existent process or job,
+              the return status is 127.  Otherwise, the return status  is  the
+              exit status of the last process or job waited for.
+
+SSHHEELLLL CCOOMMPPAATTIIBBIILLIITTYY MMOODDEE
+       Bash-4.0 introduced the concept of a `shell compatibility level', spec-
+       ified as a set of options to the shopt builtin ccoommppaatt3311, ccoommppaatt3322, ccoomm--
+       ppaatt4400,  ccoommppaatt4411,  and so on).  There is only one current compatibility
+       level -- each option is mutually exclusive.  The compatibility level is
+       intended  to allow users to select behavior from previous versions that
+       is incompatible with newer versions while they migrate scripts  to  use
+       current  features  and  behavior. It's intended to be a temporary solu-
+       tion.
+
+       This section does not mention behavior that is standard for a  particu-
+       lar  version  (e.g., setting ccoommppaatt3322 means that quoting the rhs of the
+       regexp matching operator quotes special regexp characters in the  word,
+       which is default behavior in bash-3.2 and above).
+
+       If  a  user enables, say, ccoommppaatt3322, it may affect the behavior of other
+       compatibility levels up to  and  including  the  current  compatibility
+       level.   The  idea  is  that each compatibility level controls behavior
+       that changed in that version of bbaasshh, but that behavior may  have  been
+       present  in  earlier versions.  For instance, the change to use locale-
+       based comparisons with the [[[[ command came  in  bash-4.1,  and  earlier
+       versions used ASCII-based comparisons, so enabling ccoommppaatt3322 will enable
+       ASCII-based comparisons as well.  That granularity may  not  be  suffi-
+       cient  for  all uses, and as a result users should employ compatibility
+       levels carefully.  Read the documentation for a particular  feature  to
+       find out the current behavior.
+
+       Bash-4.3  introduced  a new shell variable: BBAASSHH__CCOOMMPPAATT.  The value as-
+       signed to this variable (a decimal version number like 4.2, or an inte-
+       ger  corresponding to the ccoommppaatt_N_N option, like 42) determines the com-
+       patibility level.
+
+       Starting with bash-4.4, Bash has begun deprecating older  compatibility
+       levels.   Eventually, the options will be removed in favor of BBAASSHH__CCOOMM--
+       PPAATT.
+
+       Bash-5.0 is the final version for which there  will  be  an  individual
+       shopt  option for the previous version. Users should use BBAASSHH__CCOOMMPPAATT on
+       bash-5.0 and later versions.
+
+       The following table describes the behavior changes controlled  by  each
+       compatibility level setting.  The ccoommppaatt_N_N tag is used as shorthand for
+       setting the compatibility level to _N_N using one of the following mecha-
+       nisms.   For versions prior to bash-5.0, the compatibility level may be
+       set using the corresponding ccoommppaatt_N_N shopt option.   For  bash-4.3  and
+       later  versions,  the  BBAASSHH__CCOOMMPPAATT variable is preferred, and it is re-
+       quired for bash-5.1 and later versions.
+
+       ccoommppaatt3311
+              +o      quoting the rhs of the [[[[ command's regexp matching oper-
+                     ator (=~) has no special effect
+
+       ccoommppaatt3322
+              +o      interrupting  a  command  list such as "a ; b ; c" causes
+                     the execution  of  the  next  command  in  the  list  (in
+                     bash-4.0  and later versions, the shell acts as if it re-
+                     ceived the interrupt, so interrupting one  command  in  a
+                     list aborts the execution of the entire list)
+
+       ccoommppaatt4400
+              +o      the  <<  and >> operators to the [[[[ command do not consider
+                     the current locale when comparing strings; they use ASCII
+                     ordering.  Bash versions prior to bash-4.1 use ASCII col-
+                     lation and _s_t_r_c_m_p(3); bash-4.1 and later use the  current
+                     locale's collation sequence and _s_t_r_c_o_l_l(3).
+
+       ccoommppaatt4411
+              +o      in  _p_o_s_i_x mode, ttiimmee may be followed by options and still
+                     be recognized as a reserved word (this is POSIX interpre-
+                     tation 267)
+              +o      in _p_o_s_i_x mode, the parser requires that an even number of
+                     single quotes occur in the  _w_o_r_d  portion  of  a  double-
+                     quoted  parameter expansion and treats them specially, so
+                     that characters within the single quotes  are  considered
+                     quoted (this is POSIX interpretation 221)
+
+       ccoommppaatt4422
+              +o      the replacement string in double-quoted pattern substitu-
+                     tion does not undergo quote removal, as it does  in  ver-
+                     sions after bash-4.2
+              +o      in  posix mode, single quotes are considered special when
+                     expanding the _w_o_r_d portion of a  double-quoted  parameter
+                     expansion  and  can  be  used to quote a closing brace or
+                     other special character (this is part of POSIX  interpre-
+                     tation  221);  in  later  versions, single quotes are not
+                     special within double-quoted word expansions
+
+       ccoommppaatt4433
+              +o      the shell does not print a warning message if an  attempt
+                     is  made  to use a quoted compound assignment as an argu-
+                     ment to declare (declare -a foo='(1 2)'). Later  versions
+                     warn that this usage is deprecated
+              +o      word  expansion  errors  are  considered non-fatal errors
+                     that cause the current command to  fail,  even  in  posix
+                     mode  (the  default behavior is to make them fatal errors
+                     that cause the shell to exit)
+              +o      when  executing  a  shell  function,   the   loop   state
+                     (while/until/etc.)  is not reset, so bbrreeaakk or ccoonnttiinnuuee in
+                     that function will break or continue loops in the calling
+                     context.  Bash-4.4 and later reset the loop state to pre-
+                     vent this
+
+       ccoommppaatt4444
+              +o      the shell sets  up  the  values  used  by  BBAASSHH__AARRGGVV  and
+                     BBAASSHH__AARRGGCC  so  they  can expand to the shell's positional
+                     parameters even if extended debugging mode is not enabled
+              +o      a subshell inherits loops from  its  parent  context,  so
+                     bbrreeaakk  or  ccoonnttiinnuuee  will  cause  the  subshell  to exit.
+                     Bash-5.0 and later reset the loop state  to  prevent  the
+                     exit
+              +o      variable  assignments  preceding builtins like eexxppoorrtt and
+                     rreeaaddoonnllyy that set attributes continue to affect variables
+                     with the same name in the calling environment even if the
+                     shell is not in posix mode
+
+       ccoommppaatt5500
+              +o      Bash-5.1 changed the way $$RRAANNDDOOMM is generated  to  intro-
+                     duce slightly more randomness. If the shell compatibility
+                     level is set to 50 or lower, it  reverts  to  the  method
+                     from  bash-5.0 and previous versions, so seeding the ran-
+                     dom number generator by assigning a value to RRAANNDDOOMM  will
+                     produce the same sequence as in bash-5.0
+              +o      If  the  command hash table is empty, bash versions prior
+                     to bash-5.1 printed an informational message to that  ef-
+                     fect,  even  when  producing output that can be reused as
+                     input. Bash-5.1 suppresses that message when the  --ll  op-
+                     tion is supplied.
+
+RREESSTTRRIICCTTEEDD SSHHEELLLL
+       If bbaasshh is started with the name rrbbaasshh, or the --rr option is supplied at
+       invocation, the shell becomes restricted.  A restricted shell  is  used
+       to  set  up an environment more controlled than the standard shell.  It
+       behaves identically to bbaasshh with the exception that the  following  are
+       disallowed or not performed:
+
+       +o      changing directories with ccdd
+
+       +o      setting  or  unsetting the values of SSHHEELLLL, PPAATTHH, HHIISSTTFFIILLEE, EENNVV,
+              or BBAASSHH__EENNVV
+
+       +o      specifying command names containing //
+
+       +o      specifying a filename containing a // as an  argument  to  the  ..
+              builtin command
+
+       +o      specifying  a  filename containing a slash as an argument to the
+              hhiissttoorryy builtin command
+
+       +o      specifying a filename containing a slash as an argument  to  the
+              --pp option to the hhaasshh builtin command
+
+       +o      importing  function  definitions  from  the shell environment at
+              startup
+
+       +o      parsing the value of SSHHEELLLLOOPPTTSS from  the  shell  environment  at
+              startup
+
+       +o      redirecting output using the >, >|, <>, >&, &>, and >> redirect-
+              ion operators
+
+       +o      using the eexxeecc builtin command to replace the shell with another
+              command
+
+       +o      adding  or  deleting builtin commands with the --ff and --dd options
+              to the eennaabbllee builtin command
+
+       +o      using the  eennaabbllee  builtin  command  to  enable  disabled  shell
+              builtins
+
+       +o      specifying the --pp option to the ccoommmmaanndd builtin command
+
+       +o      turning off restricted mode with sseett ++rr or sseett ++oo rreessttrriicctteedd.
+
+       These restrictions are enforced after any startup files are read.
+
+       When a command that is found to be a shell script is executed (see CCOOMM--
+       MMAANNDD EEXXEECCUUTTIIOONN above), rrbbaasshh turns off any restrictions  in  the  shell
+       spawned to execute the script.
+
+SSEEEE AALLSSOO
+       _B_a_s_h _R_e_f_e_r_e_n_c_e _M_a_n_u_a_l, Brian Fox and Chet Ramey
+       _T_h_e _G_n_u _R_e_a_d_l_i_n_e _L_i_b_r_a_r_y, Brian Fox and Chet Ramey
+       _T_h_e _G_n_u _H_i_s_t_o_r_y _L_i_b_r_a_r_y, Brian Fox and Chet Ramey
+       _P_o_r_t_a_b_l_e  _O_p_e_r_a_t_i_n_g  _S_y_s_t_e_m  _I_n_t_e_r_f_a_c_e _(_P_O_S_I_X_) _P_a_r_t _2_: _S_h_e_l_l _a_n_d _U_t_i_l_i_-
+       _t_i_e_s, IEEE --
+              http://pubs.opengroup.org/onlinepubs/9699919799/
+       http://tiswww.case.edu/~chet/bash/POSIX -- a description of posix mode
+       _s_h(1), _k_s_h(1), _c_s_h(1)
+       _e_m_a_c_s(1), _v_i(1)
+       _r_e_a_d_l_i_n_e(3)
+
+FFIILLEESS
+       _/_b_i_n_/_b_a_s_h
+              The bbaasshh executable
+       _/_e_t_c_/_p_r_o_f_i_l_e
+              The systemwide initialization file, executed for login shells
+       _~_/_._b_a_s_h___p_r_o_f_i_l_e
+              The personal initialization file, executed for login shells
+       _~_/_._b_a_s_h_r_c
+              The individual per-interactive-shell startup file
+       _~_/_._b_a_s_h___l_o_g_o_u_t
+              The individual login shell cleanup file, executed when  a  login
+              shell exits
+       _~_/_._i_n_p_u_t_r_c
+              Individual _r_e_a_d_l_i_n_e initialization file
+
+AAUUTTHHOORRSS
+       Brian Fox, Free Software Foundation
+       bfox@gnu.org
+
+       Chet Ramey, Case Western Reserve University
+       chet.ramey@case.edu
+
+BBUUGG RREEPPOORRTTSS
+       If you find a bug in bbaasshh,, you should report it.  But first, you should
+       make sure that it really is a bug, and that it appears  in  the  latest
+       version   of  bbaasshh.   The  latest  version  is  always  available  from
+       _f_t_p_:_/_/_f_t_p_._g_n_u_._o_r_g_/_p_u_b_/_g_n_u_/_b_a_s_h_/.
+
+       Once you have determined that a bug actually exists,  use  the  _b_a_s_h_b_u_g
+       command  to submit a bug report.  If you have a fix, you are encouraged
+       to mail that as well!  Suggestions and `philosophical' bug reports  may
+       be  mailed  to  _b_u_g_-_b_a_s_h_@_g_n_u_._o_r_g  or  posted  to  the  Usenet newsgroup
+       ggnnuu..bbaasshh..bbuugg.
+
+       ALL bug reports should include:
+
+       The version number of bbaasshh
+       The hardware and operating system
+       The compiler used to compile
+       A description of the bug behaviour
+       A short script or `recipe' which exercises the bug
+
+       _b_a_s_h_b_u_g inserts the first three items automatically into  the  template
+       it provides for filing a bug report.
+
+       Comments and bug reports concerning this manual page should be directed
+       to _c_h_e_t_._r_a_m_e_y_@_c_a_s_e_._e_d_u.
+
+BBUUGGSS
+       It's too big and too slow.
+
+       There are some subtle differences between bbaasshh and traditional versions
+       of sshh, mostly because of the PPOOSSIIXX specification.
+
+       Aliases are confusing in some uses.
+
+       Shell builtin commands and functions are not stoppable/restartable.
+
+       Compound commands and command sequences of the form `a ; b ; c' are not
+       handled gracefully  when  process  suspension  is  attempted.   When  a
+       process  is stopped, the shell immediately executes the next command in
+       the sequence.  It suffices to place the sequence  of  commands  between
+       parentheses  to  force  it  into  a subshell, which may be stopped as a
+       unit.
+
+       Array variables may not (yet) be exported.
+
+       There may be only one active coprocess at a time.
+
+
+
+GNU Bash 5.1                    2020 October 29                        BASH(1)
diff --git a/doc/bash.1 b/doc/bash.1
new file mode 100644
index 0000000..5af7d42
--- /dev/null
+++ b/doc/bash.1
@@ -0,0 +1,11297 @@
+.\"
+.\" MAN PAGE COMMENTS to
+.\"
+.\"	Chet Ramey
+.\"	Case Western Reserve University
+.\"	chet.ramey@case.edu
+.\"
+.\"	Last Change: Wed Sep 23 09:28:31 EDT 2020
+.\"
+.\" bash_builtins, strip all but Built-Ins section
+.if \n(zZ=1 .ig zZ
+.if \n(zY=1 .ig zY
+.TH BASH 1 "2020 October 29" "GNU Bash 5.1"
+.\"
+.\" There's some problem with having a `@'
+.\" in a tagged paragraph with the BSD man macros.
+.\" It has to do with `@' appearing in the }1 macro.
+.\" This is a problem on 4.3 BSD and Ultrix, but Sun
+.\" appears to have fixed it.
+.\" If you're seeing the characters
+.\" `@u-3p' appearing before the lines reading
+.\" `possible-hostname-completions
+.\" and `complete-hostname' down in READLINE,
+.\" then uncomment this redefinition.
+.\"
+.\" .de }1
+.\" .ds ]X \&\\*(]B\\
+.\" .nr )E 0
+.\" .if !"\\$1"" .nr )I \\$1n
+.\" .}f
+.\" .ll \\n(LLu
+.\" .in \\n()Ru+\\n(INu+\\n()Iu
+.\" .ti \\n(INu
+.\" .ie !\\n()Iu+\\n()Ru-\w\\*(]Xu-3p \{\\*(]X
+.\" .br\}
+.\" .el \\*(]X\h|\\n()Iu+\\n()Ru\c
+.\" .}f
+.\" ..
+.\"
+.\" File Name macro.  This used to be `.PN', for Path Name,
+.\" but Sun doesn't seem to like that very much.
+.\"
+.de FN
+\fI\|\\$1\|\fP
+..
+.SH NAME
+bash \- GNU Bourne-Again SHell
+.SH SYNOPSIS
+.B bash
+[options]
+[command_string | file]
+.SH COPYRIGHT
+.if n Bash is Copyright (C) 1989-2020 by the Free Software Foundation, Inc.
+.if t Bash is Copyright \(co 1989-2020 by the Free Software Foundation, Inc.
+.SH DESCRIPTION
+.B Bash
+is an \fBsh\fR-compatible command language interpreter that
+executes commands read from the standard input or from a file.
+.B Bash
+also incorporates useful features from the \fIKorn\fP and \fIC\fP
+shells (\fBksh\fP and \fBcsh\fP).
+.PP
+.B Bash
+is intended to be a conformant implementation of the
+Shell and Utilities portion of the IEEE POSIX specification
+(IEEE Standard 1003.1).
+.B Bash
+can be configured to be POSIX-conformant by default.
+.SH OPTIONS
+All of the single-character shell options documented in the
+description of the \fBset\fR builtin command, including \fB\-o\fP,
+can be used as options when the shell is invoked.
+In addition, \fBbash\fR
+interprets the following options when it is invoked:
+.PP
+.PD 0
+.TP 10
+.B \-c
+If the
+.B \-c
+option is present, then commands are read from the first non-option argument
+.IR command_string .
+If there are arguments after the
+.IR command_string ,
+the first argument is assigned to
+.B $0
+and any remaining arguments are assigned to the positional parameters.
+The assignment to
+.B $0
+sets the name of the shell, which is used in warning and error messages.
+.TP
+.B \-i
+If the
+.B \-i
+option is present, the shell is
+.IR interactive .
+.TP
+.B \-l
+Make
+.B bash
+act as if it had been invoked as a login shell (see
+.SM
+.B INVOCATION
+below).
+.TP
+.B \-r
+If the
+.B \-r
+option is present, the shell becomes
+.I restricted
+(see
+.SM
+.B "RESTRICTED SHELL"
+below).
+.TP
+.B \-s
+If the
+.B \-s
+option is present, or if no arguments remain after option
+processing, then commands are read from the standard input.
+This option allows the positional parameters to be set
+when invoking an interactive shell or when reading input
+through a pipe.
+.TP
+.B \-D
+A list of all double-quoted strings preceded by \fB$\fP
+is printed on the standard output.
+These are the strings that
+are subject to language translation when the current locale
+is not \fBC\fP or \fBPOSIX\fP.
+This implies the \fB\-n\fP option; no commands will be executed.
+.TP
+.B [\-+]O [\fIshopt_option\fP]
+\fIshopt_option\fP is one of the shell options accepted by the
+\fBshopt\fP builtin (see
+.SM
+.B SHELL BUILTIN COMMANDS
+below).
+If \fIshopt_option\fP is present, \fB\-O\fP sets the value of that option;
+\fB+O\fP unsets it.
+If \fIshopt_option\fP is not supplied, the names and values of the shell
+options accepted by \fBshopt\fP are printed on the standard output.
+If the invocation option is \fB+O\fP, the output is displayed in a format
+that may be reused as input.
+.TP
+.B \-\-
+A
+.B \-\-
+signals the end of options and disables further option processing.
+Any arguments after the
+.B \-\-
+are treated as filenames and arguments.  An argument of
+.B \-
+is equivalent to \fB\-\-\fP.
+.PD
+.PP
+.B Bash
+also interprets a number of multi-character options.
+These options must appear on the command line before the
+single-character options to be recognized.
+.PP
+.PD 0
+.TP
+.B \-\-debugger
+Arrange for the debugger profile to be executed before the shell
+starts.
+Turns on extended debugging mode (see the description of the
+.B extdebug
+option to the
+.B shopt
+builtin below).
+.TP
+.B \-\-dump\-po\-strings
+Equivalent to \fB\-D\fP, but the output is in the GNU \fIgettext\fP
+\fBpo\fP (portable object) file format.
+.TP
+.B \-\-dump\-strings
+Equivalent to \fB\-D\fP.
+.TP
+.B \-\-help
+Display a usage message on standard output and exit successfully.
+.TP
+\fB\-\-init\-file\fP \fIfile\fP
+.PD 0
+.TP
+\fB\-\-rcfile\fP \fIfile\fP
+.PD
+Execute commands from
+.I file
+instead of the standard personal initialization file
+.I ~/.bashrc
+if the shell is interactive (see
+.SM
+.B INVOCATION
+below).
+.TP
+.B \-\-login
+Equivalent to \fB\-l\fP.
+.TP
+.B \-\-noediting
+Do not use the GNU
+.B readline
+library to read command lines when the shell is interactive.
+.TP
+.B \-\-noprofile
+Do not read either the system-wide startup file
+.FN /etc/profile
+or any of the personal initialization files
+.IR ~/.bash_profile ,
+.IR ~/.bash_login ,
+or
+.IR ~/.profile .
+By default,
+.B bash
+reads these files when it is invoked as a login shell (see
+.SM
+.B INVOCATION
+below).
+.TP
+.B \-\-norc
+Do not read and execute the personal initialization file
+.I ~/.bashrc
+if the shell is interactive.
+This option is on by default if the shell is invoked as
+.BR sh .
+.TP
+.B \-\-posix
+Change the behavior of \fBbash\fP where the default operation differs
+from the POSIX standard to match the standard (\fIposix mode\fP).
+See
+.SM
+.B "SEE ALSO"
+below for a reference to a document that details how posix mode affects
+bash's behavior.
+.TP
+.B \-\-restricted
+The shell becomes restricted (see
+.SM
+.B "RESTRICTED SHELL"
+below).
+.TP
+.B \-\-verbose
+Equivalent to \fB\-v\fP.
+.TP
+.B \-\-version
+Show version information for this instance of
+.B bash
+on the standard output and exit successfully.
+.PD
+.SH ARGUMENTS
+If arguments remain after option processing, and neither the
+.B \-c
+nor the
+.B \-s
+option has been supplied, the first argument is assumed to
+be the name of a file containing shell commands.
+If
+.B bash
+is invoked in this fashion,
+.B $0
+is set to the name of the file, and the positional parameters
+are set to the remaining arguments.
+.B Bash
+reads and executes commands from this file, then exits.
+\fBBash\fP's exit status is the exit status of the last command
+executed in the script.
+If no commands are executed, the exit status is 0.
+An attempt is first made to open the file in the current directory, and,
+if no file is found, then the shell searches the directories in
+.SM
+.B PATH
+for the script.
+.SH INVOCATION
+A \fIlogin shell\fP is one whose first character of argument zero is a
+.BR \- ,
+or one started with the
+.B \-\-login
+option.
+.PP
+An \fIinteractive\fP shell is one started without non-option arguments
+(unless \fB\-s\fP is specified)
+and without the
+.B \-c
+option
+whose standard input and error are
+both connected to terminals (as determined by
+.IR isatty (3)),
+or one started with the
+.B \-i
+option.
+.SM
+.B PS1
+is set and
+.B $\-
+includes
+.B i
+if
+.B bash
+is interactive,
+allowing a shell script or a startup file to test this state.
+.PP
+The following paragraphs describe how
+.B bash
+executes its startup files.
+If any of the files exist but cannot be read,
+.B bash
+reports an error.
+Tildes are expanded in filenames as described below under
+.B "Tilde Expansion"
+in the
+.SM
+.B EXPANSION
+section.
+.PP
+When
+.B bash
+is invoked as an interactive login shell, or as a non-interactive shell
+with the \fB\-\-login\fP option, it first reads and
+executes commands from the file \fI/etc/profile\fP, if that
+file exists.
+After reading that file, it looks for \fI~/.bash_profile\fP,
+\fI~/.bash_login\fP, and \fI~/.profile\fP, in that order, and reads
+and executes commands from the first one that exists and is readable.
+The
+.B \-\-noprofile
+option may be used when the shell is started to inhibit this behavior.
+.PP
+When an interactive login shell exits,
+or a non-interactive login shell executes the \fBexit\fP builtin command,
+.B bash
+reads and executes commands from the file \fI~/.bash_logout\fP, if it
+exists.
+.PP
+When an interactive shell that is not a login shell is started,
+.B bash
+reads and executes commands from \fI~/.bashrc\fP, if that file exists.
+This may be inhibited by using the
+.B \-\-norc
+option.
+The \fB\-\-rcfile\fP \fIfile\fP option will force
+.B bash
+to read and execute commands from \fIfile\fP instead of \fI~/.bashrc\fP.
+.PP
+When
+.B bash
+is started non-interactively, to run a shell script, for example, it
+looks for the variable
+.SM
+.B BASH_ENV
+in the environment, expands its value if it appears there, and uses the
+expanded value as the name of a file to read and execute.
+.B Bash
+behaves as if the following command were executed:
+.sp .5
+.RS
+.if t \f(CWif [ \-n "$BASH_ENV" ]; then . "$BASH_ENV"; fi\fP
+.if n if [ \-n "$BASH_ENV" ]; then . "$BASH_ENV"; fi
+.RE
+.sp .5
+but the value of the
+.SM
+.B PATH
+variable is not used to search for the filename.
+.PP
+If
+.B bash
+is invoked with the name
+.BR sh ,
+it tries to mimic the startup behavior of historical versions of
+.B sh
+as closely as possible,
+while conforming to the POSIX standard as well.
+When invoked as an interactive login shell, or a non-interactive
+shell with the \fB\-\-login\fP option, it first attempts to
+read and execute commands from
+.I /etc/profile
+and
+.IR ~/.profile ,
+in that order.
+The
+.B \-\-noprofile
+option may be used to inhibit this behavior.
+When invoked as an interactive shell with the name
+.BR sh ,
+.B bash
+looks for the variable
+.SM
+.BR ENV ,
+expands its value if it is defined, and uses the
+expanded value as the name of a file to read and execute.
+Since a shell invoked as
+.B sh
+does not attempt to read and execute commands from any other startup
+files, the
+.B \-\-rcfile
+option has no effect.
+A non-interactive shell invoked with the name
+.B sh
+does not attempt to read any other startup files.
+When invoked as
+.BR sh ,
+.B bash
+enters
+.I posix
+mode after the startup files are read.
+.PP
+When
+.B bash
+is started in
+.I posix
+mode, as with the
+.B \-\-posix
+command line option, it follows the POSIX standard for startup files.
+In this mode, interactive shells expand the
+.SM
+.B ENV
+variable and commands are read and executed from the file
+whose name is the expanded value.
+No other startup files are read.
+.PP
+.B Bash
+attempts to determine when it is being run with its standard input
+connected to a network connection, as when executed by the remote shell
+daemon, usually \fIrshd\fP, or the secure shell daemon \fIsshd\fP.
+If
+.B bash
+determines it is being run in this fashion, it reads and executes
+commands from \fI~/.bashrc\fP, if that file exists and is readable.
+It will not do this if invoked as \fBsh\fP.
+The
+.B \-\-norc
+option may be used to inhibit this behavior, and the
+.B \-\-rcfile
+option may be used to force another file to be read, but neither
+\fIrshd\fP nor \fIsshd\fP generally invoke the shell with those options
+or allow them to be specified.
+.PP
+If the shell is started with the effective user (group) id not equal to the
+real user (group) id, and the \fB\-p\fP option is not supplied, no startup
+files are read, shell functions are not inherited from the environment, the
+.SM
+.BR SHELLOPTS ,
+.SM
+.BR BASHOPTS ,
+.SM
+.BR CDPATH ,
+and
+.SM
+.B GLOBIGNORE
+variables, if they appear in the environment, are ignored,
+and the effective user id is set to the real user id.
+If the \fB\-p\fP option is supplied at invocation, the startup behavior is
+the same, but the effective user id is not reset.
+.SH DEFINITIONS
+The following definitions are used throughout the rest of this
+document.
+.PD 0
+.TP
+.B blank
+A space or tab.
+.TP
+.B word
+A sequence of characters considered as a single unit by the shell.
+Also known as a
+.BR token .
+.TP
+.B name
+A
+.I word
+consisting only of alphanumeric characters and underscores, and
+beginning with an alphabetic character or an underscore.  Also
+referred to as an
+.BR identifier .
+.TP
+.B metacharacter
+A character that, when unquoted, separates words.  One of the following:
+.br
+.RS
+.PP
+.if t \fB|  &  ;  (  )  <  >  space  tab  newline\fP
+.if n \fB|  & ; ( ) < > space tab newline\fP
+.RE
+.TP
+.B control operator
+A \fItoken\fP that performs a control function.  It is one of the following
+symbols:
+.RS
+.PP
+.if t \fB||  &  &&  ;  ;;  ;&  ;;&  (  )  |  |&    <newline>\fP
+.if n \fB|| & && ; ;; ;& ;;& ( ) | |& <newline>\fP
+.RE
+.PD
+.SH "RESERVED WORDS"
+\fIReserved words\fP are words that have a special meaning to the shell.
+The following words are recognized as reserved when unquoted and either
+the first word of a command (see
+.SM
+.B SHELL GRAMMAR
+below), the third word of a
+.B case
+or
+.B select
+command
+(only \fBin\fP is valid), or the third word of a
+.B for
+command (only \fBin\fP and \fBdo\fP are valid):
+.if t .RS
+.PP
+.B
+.if n ! case  coproc  do done elif else esac fi for function if in select then until while { } time [[ ]]
+.if t !    case    coproc    do    done    elif    else    esac    fi    for    function    if    in    select    then    until    while    {    }    time    [[    ]]
+.if t .RE
+.SH "SHELL GRAMMAR"
+.SS Simple Commands
+A \fIsimple command\fP is a sequence of optional variable assignments
+followed by \fBblank\fP-separated words and redirections, and
+terminated by a \fIcontrol operator\fP.  The first word
+specifies the command to be executed, and is passed as argument zero.
+The remaining words are passed as arguments to the invoked command.
+.PP
+The return value of a \fIsimple command\fP is its exit status, or
+128+\fIn\^\fP if the command is terminated by signal
+.IR n .
+.SS Pipelines
+A \fIpipeline\fP is a sequence of one or more commands separated by
+one of the control operators
+.B |
+or \fB|&\fP.
+The format for a pipeline is:
+.RS
+.PP
+[\fBtime\fP [\fB\-p\fP]] [ ! ] \fIcommand\fP [ [\fB|\fP\(bv\fB|&\fP] \fIcommand2\fP ... ]
+.RE
+.PP
+The standard output of
+.I command
+is connected via a pipe to the standard input of
+.IR command2 .
+This connection is performed before any redirections specified by the
+command (see
+.SM
+.B REDIRECTION
+below).
+If \fB|&\fP is used, \fIcommand\fP's standard error, in addition to its
+standard output, is connected to
+\fIcommand2\fP's standard input through the pipe;
+it is shorthand for \fB2>&1 |\fP.
+This implicit redirection of the standard error to the standard output is
+performed after any redirections specified by the command.
+.PP
+The return status of a pipeline is the exit status of the last
+command, unless the \fBpipefail\fP option is enabled.
+If \fBpipefail\fP is enabled, the pipeline's return status is the
+value of the last (rightmost) command to exit with a non-zero status,
+or zero if all commands exit successfully.
+If the reserved word
+.B !
+precedes a pipeline, the exit status of that pipeline is the logical
+negation of the exit status as described above.
+The shell waits for all commands in the pipeline to
+terminate before returning a value.
+.PP
+If the
+.B time
+reserved word precedes a pipeline, the elapsed as well as user and
+system time consumed by its execution are reported when the pipeline
+terminates.
+The \fB\-p\fP option changes the output format to that specified by POSIX.
+When the shell is in \fIposix mode\fP, it does not recognize
+\fBtime\fP as a reserved word if the next token begins with a `-'.
+The
+.SM
+.B TIMEFORMAT
+variable may be set to a format string that specifies how the timing
+information should be displayed; see the description of
+.SM
+.B TIMEFORMAT
+under
+.B "Shell Variables"
+below.
+.PP
+When the shell is in \fIposix mode\fP, \fBtime\fP
+may be followed by a newline.  In this case, the shell displays the
+total user and system time consumed by the shell and its children.
+The
+.SM
+.B TIMEFORMAT
+variable may be used to specify the format of
+the time information.
+.PP
+Each command in a pipeline is executed as a separate process (i.e., in a
+subshell).
+See
+.SM
+\fBCOMMAND EXECUTION ENVIRONMENT\fP
+for a description of a subshell environment.
+If the \fBlastpipe\fP option is enabled using the \fBshopt\fP builtin
+(see the description of \fBshopt\fP below),
+the last element of a pipeline may be run by the shell process.
+.SS Lists
+A \fIlist\fP is a sequence of one or more pipelines separated by one
+of the operators
+.BR ; ,
+.BR & ,
+.BR && ,
+or
+.BR || ,
+and optionally terminated by one of
+.BR ; ,
+.BR & ,
+or
+.BR <newline> .
+.PP
+Of these list operators,
+.B &&
+and
+.B ||
+have equal precedence, followed by
+.B ;
+and
+.BR & ,
+which have equal precedence.
+.PP
+A sequence of one or more newlines may appear in a \fIlist\fP instead
+of a semicolon to delimit commands.
+.PP
+If a command is terminated by the control operator
+.BR & ,
+the shell executes the command in the \fIbackground\fP
+in a subshell.
+The shell does not wait for the command to
+finish, and the return status is 0.
+These are referred to as \fIasynchronous\fP commands.
+Commands separated by a
+.B ;
+are executed sequentially; the shell waits for each
+command to terminate in turn.  The return status is the
+exit status of the last command executed.
+.PP
+AND and OR lists are sequences of one or more pipelines separated by the
+\fB&&\fP and \fB||\fP control operators, respectively.
+AND and OR lists are executed with left associativity.
+An AND list has the form
+.RS
+.PP
+\fIcommand1\fP \fB&&\fP \fIcommand2\fP
+.RE
+.PP
+.I command2
+is executed if, and only if,
+.I command1
+returns an exit status of zero (success).
+.PP
+An OR list has the form
+.RS
+.PP
+\fIcommand1\fP \fB||\fP \fIcommand2\fP
+.RE
+.PP
+.I command2
+is executed if, and only if,
+.I command1
+returns a non-zero exit status.
+The return status of
+AND and OR lists is the exit status of the last command
+executed in the list.
+.SS Compound Commands
+A \fIcompound command\fP is one of the following.
+In most cases a \fIlist\fP in a command's description may be separated from
+the rest of the command by one or more newlines, and may be followed by a
+newline in place of a semicolon.
+.TP
+(\fIlist\fP)
+\fIlist\fP is executed in a subshell environment (see
+.SM
+\fBCOMMAND EXECUTION ENVIRONMENT\fP
+below).
+Variable assignments and builtin
+commands that affect the shell's environment do not remain in effect
+after the command completes.  The return status is the exit status of
+\fIlist\fP.
+.TP
+{ \fIlist\fP; }
+\fIlist\fP is simply executed in the current shell environment.
+\fIlist\fP must be terminated with a newline or semicolon.
+This is known as a \fIgroup command\fP.
+The return status is the exit status of
+\fIlist\fP.
+Note that unlike the metacharacters \fB(\fP and \fB)\fP, \fB{\fP and
+\fB}\fP are \fIreserved words\fP and must occur where a reserved
+word is permitted to be recognized.  Since they do not cause a word
+break, they must be separated from \fIlist\fP by whitespace or another
+shell metacharacter.
+.TP
+((\fIexpression\fP))
+The \fIexpression\fP is evaluated according to the rules described
+below under
+.SM
+.BR "ARITHMETIC EVALUATION" .
+If the value of the expression is non-zero, the return status is 0;
+otherwise the return status is 1.  This is exactly equivalent to
+\fBlet "\fIexpression\fP"\fR.
+.TP
+\fB[[\fP \fIexpression\fP \fB]]\fP
+Return a status of 0 or 1 depending on the evaluation of
+the conditional expression \fIexpression\fP.
+Expressions are composed of the primaries described below under
+.SM
+.BR "CONDITIONAL EXPRESSIONS" .
+Word splitting and pathname expansion are not performed on the words
+between the \fB[[\fP and \fB]]\fP; tilde expansion,
+parameter and variable expansion,
+arithmetic expansion, command substitution, process
+substitution, and quote removal are performed.
+Conditional operators such as \fB\-f\fP must be unquoted to be recognized
+as primaries.
+.if t .sp 0.5
+.if n .sp 1
+When used with \fB[[\fP, the \fB<\fP and \fB>\fP operators sort
+lexicographically using the current locale.
+.if t .sp 0.5
+.if n .sp 1
+When the \fB==\fP and \fB!=\fP operators are used, the string to the
+right of the operator is considered a pattern and matched according
+to the rules described below under \fBPattern Matching\fP,
+as if the \fBextglob\fP shell option were enabled.
+The \fB=\fP operator is equivalent to \fB==\fP.
+If the
+.B nocasematch
+shell option is enabled, the match is performed without regard to the case
+of alphabetic characters.
+The return value is 0 if the string matches (\fB==\fP) or does not match
+(\fB!=\fP) the pattern, and 1 otherwise.
+Any part of the pattern may be quoted to force the quoted portion
+to be matched as a string.
+.if t .sp 0.5
+.if n .sp 1
+An additional binary operator, \fB=~\fP, is available, with the same
+precedence as \fB==\fP and \fB!=\fP.
+When it is used, the string to the right of the operator is considered
+a POSIX extended regular expression and matched accordingly
+(using the POSIX \fIregcomp\fP and \fIregexec\fP interfaces
+usually described in \fIregex\fP(3)).
+The return value is 0 if the string matches
+the pattern, and 1 otherwise.
+If the regular expression is syntactically incorrect, the conditional
+expression's return value is 2.
+If the
+.B nocasematch
+shell option is enabled, the match is performed without regard to the case
+of alphabetic characters.
+Any part of the pattern may be quoted to force the quoted portion
+to be matched as a string.
+Bracket expressions in regular expressions must be treated carefully,
+since normal quoting characters lose their meanings between brackets.
+If the pattern is stored in a shell variable, quoting the variable
+expansion forces the entire pattern to be matched as a string.
+.if t .sp 0.5
+.if n .sp 1
+The pattern will match if it matches any part of the string.
+Anchor the pattern using the \fB^\fP and \fB$\fP regular expression
+operators to force it to match the entire string.
+The array variable
+.SM
+.B BASH_REMATCH
+records which parts of the string matched the pattern.
+The element of
+.SM
+.B BASH_REMATCH
+with index 0 contains the portion of
+the string matching the entire regular expression.
+Substrings matched by parenthesized subexpressions within the regular
+expression are saved in the remaining
+.SM
+.B BASH_REMATCH
+indices. The element of
+.SM
+.B BASH_REMATCH
+with index \fIn\fP is the portion of the
+string matching the \fIn\fPth parenthesized subexpression.
+.if t .sp 0.5
+.if n .sp 1
+Expressions may be combined using the following operators, listed
+in decreasing order of precedence:
+.if t .sp 0.5
+.if n .sp 1
+.RS
+.PD 0
+.TP
+.B ( \fIexpression\fP )
+Returns the value of \fIexpression\fP.
+This may be used to override the normal precedence of operators.
+.TP
+.B ! \fIexpression\fP
+True if
+.I expression
+is false.
+.TP
+\fIexpression1\fP \fB&&\fP \fIexpression2\fP
+True if both
+.I expression1
+and
+.I expression2
+are true.
+.TP
+\fIexpression1\fP \fB||\fP \fIexpression2\fP
+True if either
+.I expression1
+or
+.I expression2
+is true.
+.PD
+.LP
+The \fB&&\fP and \fB||\fP
+operators do not evaluate \fIexpression2\fP if the value of
+\fIexpression1\fP is sufficient to determine the return value of
+the entire conditional expression.
+.RE
+.TP
+\fBfor\fP \fIname\fP [ [ \fBin\fP [ \fIword ...\fP ] ] ; ] \fBdo\fP \fIlist\fP ; \fBdone\fP
+The list of words following \fBin\fP is expanded, generating a list
+of items.
+The variable \fIname\fP is set to each element of this list
+in turn, and \fIlist\fP is executed each time.
+If the \fBin\fP \fIword\fP is omitted, the \fBfor\fP command executes
+\fIlist\fP once for each positional parameter that is set (see
+.SM
+.B PARAMETERS
+below).
+The return status is the exit status of the last command that executes.
+If the expansion of the items following \fBin\fP results in an empty
+list, no commands are executed, and the return status is 0.
+.TP
+\fBfor\fP (( \fIexpr1\fP ; \fIexpr2\fP ; \fIexpr3\fP )) ; \fBdo\fP \fIlist\fP ; \fBdone\fP
+First, the arithmetic expression \fIexpr1\fP is evaluated according
+to the rules described below under
+.SM
+.BR "ARITHMETIC EVALUATION" .
+The arithmetic expression \fIexpr2\fP is then evaluated repeatedly
+until it evaluates to zero.
+Each time \fIexpr2\fP evaluates to a non-zero value, \fIlist\fP is
+executed and the arithmetic expression \fIexpr3\fP is evaluated.
+If any expression is omitted, it behaves as if it evaluates to 1.
+The return value is the exit status of the last command in \fIlist\fP
+that is executed, or false if any of the expressions is invalid.
+.TP
+\fBselect\fP \fIname\fP [ \fBin\fP \fIword\fP ] ; \fBdo\fP \fIlist\fP ; \fBdone\fP
+The list of words following \fBin\fP is expanded, generating a list
+of items.  The set of expanded words is printed on the standard
+error, each preceded by a number.  If the \fBin\fP
+\fIword\fP is omitted, the positional parameters are printed (see
+.SM
+.B PARAMETERS
+below).  The
+.SM
+.B PS3
+prompt is then displayed and a line read from the standard input.
+If the line consists of a number corresponding to one of
+the displayed words, then the value of
+.I name
+is set to that word.  If the line is empty, the words and prompt
+are displayed again.  If EOF is read, the command completes.  Any
+other value read causes
+.I name
+to be set to null.  The line read is saved in the variable
+.SM
+.BR REPLY .
+The
+.I list
+is executed after each selection until a
+.B break
+command is executed.
+The exit status of
+.B select
+is the exit status of the last command executed in
+.IR list ,
+or zero if no commands were executed.
+.TP
+\fBcase\fP \fIword\fP \fBin\fP [ [(] \fIpattern\fP [ \fB|\fP \fIpattern\fP ] \
+... ) \fIlist\fP ;; ] ... \fBesac\fP
+A \fBcase\fP command first expands \fIword\fP, and tries to match
+it against each \fIpattern\fP in turn, using the matching rules
+described under
+.B Pattern Matching
+below.
+The \fIword\fP is expanded using tilde
+expansion, parameter and variable expansion, arithmetic expansion,
+command substitution, process substitution and quote removal.
+Each \fIpattern\fP examined is expanded using tilde
+expansion, parameter and variable expansion, arithmetic expansion,
+command substitution, and process substitution.
+If the
+.B nocasematch
+shell option is enabled, the match is performed without regard to the case
+of alphabetic characters.
+When a match is found, the corresponding \fIlist\fP is executed.
+If the \fB;;\fP operator is used, no subsequent matches are attempted after
+the first pattern match.
+Using \fB;&\fP in place of \fB;;\fP causes execution to continue with
+the \fIlist\fP associated with the next set of patterns.
+Using \fB;;&\fP in place of \fB;;\fP causes the shell to test the next
+pattern list in the statement, if any, and execute any associated \fIlist\fP
+on a successful match,
+continuing the case statement execution as if the pattern list had not matched.
+The exit status is zero if no
+pattern matches.  Otherwise, it is the exit status of the
+last command executed in \fIlist\fP.
+.TP
+\fBif\fP \fIlist\fP; \fBthen\fP \fIlist\fP; \
+[ \fBelif\fP \fIlist\fP; \fBthen\fP \fIlist\fP; ] ... \
+[ \fBelse\fP \fIlist\fP; ] \fBfi\fP
+The
+.B if
+.I list
+is executed.  If its exit status is zero, the
+\fBthen\fP \fIlist\fP is executed.  Otherwise, each \fBelif\fP
+\fIlist\fP is executed in turn, and if its exit status is zero,
+the corresponding \fBthen\fP \fIlist\fP is executed and the
+command completes.  Otherwise, the \fBelse\fP \fIlist\fP is
+executed, if present.  The exit status is the exit status of the
+last command executed, or zero if no condition tested true.
+.TP
+\fBwhile\fP \fIlist-1\fP; \fBdo\fP \fIlist-2\fP; \fBdone\fP
+.PD 0
+.TP
+\fBuntil\fP \fIlist-1\fP; \fBdo\fP \fIlist-2\fP; \fBdone\fP
+.PD
+The \fBwhile\fP command continuously executes the list
+\fIlist-2\fP as long as the last command in the list \fIlist-1\fP returns
+an exit status of zero.  The \fBuntil\fP command is identical
+to the \fBwhile\fP command, except that the test is negated:
+.I list-2
+is executed as long as the last command in
+.I list-1
+returns a non-zero exit status.
+The exit status of the \fBwhile\fP and \fBuntil\fP commands
+is the exit status
+of the last command executed in \fIlist-2\fP, or zero if
+none was executed.
+.SS Coprocesses
+A \fIcoprocess\fP is a shell command preceded by the \fBcoproc\fP reserved
+word.
+A coprocess is executed asynchronously in a subshell, as if the command
+had been terminated with the \fB&\fP control operator, with a two-way pipe
+established between the executing shell and the coprocess.
+.PP
+The format for a coprocess is:
+.RS
+.PP
+\fBcoproc\fP [\fINAME\fP] \fIcommand\fP [\fIredirections\fP]
+.RE
+.PP
+This creates a coprocess named \fINAME\fP.
+If \fINAME\fP is not supplied, the default name is \fBCOPROC\fP.
+\fINAME\fP must not be supplied if \fIcommand\fP is a \fIsimple
+command\fP (see above); otherwise, it is interpreted as the first word
+of the simple command.
+When the coprocess is executed, the shell creates an array variable (see
+.B Arrays
+below) named \fINAME\fP in the context of the executing shell.
+The standard output of
+.I command
+is connected via a pipe to a file descriptor in the executing shell,
+and that file descriptor is assigned to \fINAME\fP[0].
+The standard input of
+.I command
+is connected via a pipe to a file descriptor in the executing shell,
+and that file descriptor is assigned to \fINAME\fP[1].
+This pipe is established before any redirections specified by the
+command (see
+.SM
+.B REDIRECTION
+below).
+The file descriptors can be utilized as arguments to shell commands
+and redirections using standard word expansions.
+Other than those created to execute command and process substitutions,
+the file descriptors are not available in subshells.
+The process ID of the shell spawned to execute the coprocess is
+available as the value of the variable \fINAME\fP_PID.
+The \fBwait\fP
+builtin command may be used to wait for the coprocess to terminate.
+.PP
+Since the coprocess is created as an asynchronous command,
+the \fBcoproc\fP command always returns success.
+The return status of a coprocess is the exit status of \fIcommand\fP.
+.SS Shell Function Definitions
+A shell function is an object that is called like a simple command and
+executes a compound command with a new set of positional parameters.
+Shell functions are declared as follows:
+.TP
+\fIfname\fP () \fIcompound\-command\fP [\fIredirection\fP]
+.PD 0
+.TP
+\fBfunction\fP \fIfname\fP [()] \fIcompound\-command\fP [\fIredirection\fP]
+.PD
+This defines a function named \fIfname\fP.
+The reserved word \fBfunction\fP is optional.
+If the \fBfunction\fP reserved word is supplied, the parentheses are optional.
+The \fIbody\fP of the function is the compound command
+.I compound\-command
+(see \fBCompound Commands\fP above).
+That command is usually a \fIlist\fP of commands between { and }, but
+may be any command listed under \fBCompound Commands\fP above,
+with one exception: If the \fBfunction\fP reserved word is used, but the
+parentheses are not supplied, the braces are required.
+\fIcompound\-command\fP is executed whenever \fIfname\fP is specified as the
+name of a simple command.
+When in \fIposix mode\fP, \fIfname\fP must be a valid shell \fIname\fP
+and may not be the name of one of the
+POSIX \fIspecial builtins\fP.
+In default mode, a function name can be any unquoted shell word that does
+not contain \fB$\fP.
+Any redirections (see
+.SM
+.B REDIRECTION
+below) specified when a function is defined are performed
+when the function is executed.
+The exit status of a function definition is zero unless a syntax error
+occurs or a readonly function with the same name already exists.
+When executed, the exit status of a function is the exit status of the
+last command executed in the body.  (See
+.SM
+.B FUNCTIONS
+below.)
+.SH COMMENTS
+In a non-interactive shell, or an interactive shell in which the
+.B interactive_comments
+option to the
+.B shopt
+builtin is enabled (see
+.SM
+.B "SHELL BUILTIN COMMANDS"
+below), a word beginning with
+.B #
+causes that word and all remaining characters on that line to
+be ignored.  An interactive shell without the
+.B interactive_comments
+option enabled does not allow comments.  The
+.B interactive_comments
+option is on by default in interactive shells.
+.SH QUOTING
+\fIQuoting\fP is used to remove the special meaning of certain
+characters or words to the shell.  Quoting can be used to
+disable special treatment for special characters, to prevent
+reserved words from being recognized as such, and to prevent
+parameter expansion.
+.PP
+Each of the \fImetacharacters\fP listed above under
+.SM
+.B DEFINITIONS
+has special meaning to the shell and must be quoted if it is to
+represent itself.
+.PP
+When the command history expansion facilities are being used
+(see
+.SM
+.B HISTORY EXPANSION
+below), the
+\fIhistory expansion\fP character, usually \fB!\fP, must be quoted
+to prevent history expansion.
+.PP
+There are three quoting mechanisms: the
+.IR "escape character" ,
+single quotes, and double quotes.
+.PP
+A non-quoted backslash (\fB\e\fP) is the
+.IR "escape character" .
+It preserves the literal value of the next character that follows,
+with the exception of <newline>.  If a \fB\e\fP<newline> pair
+appears, and the backslash is not itself quoted, the \fB\e\fP<newline>
+is treated as a line continuation (that is, it is removed from the
+input stream and effectively ignored).
+.PP
+Enclosing characters in single quotes preserves the literal value
+of each character within the quotes.  A single quote may not occur
+between single quotes, even when preceded by a backslash.
+.PP
+Enclosing characters in double quotes preserves the literal value
+of all characters within the quotes, with the exception of
+.BR $ ,
+.BR \` ,
+.BR \e ,
+and, when history expansion is enabled,
+.BR ! .
+When the shell is in \fIposix mode\fP, the \fB!\fP has no special meaning
+within double quotes, even when history expansion is enabled.
+The characters
+.B $
+and
+.B \`
+retain their special meaning within double quotes.  The backslash
+retains its special meaning only when followed by one of the following
+characters:
+.BR $ ,
+.BR \` ,
+\^\fB"\fP\^,
+.BR \e ,
+or
+.BR <newline> .
+A double quote may be quoted within double quotes by preceding it with
+a backslash.
+If enabled, history expansion will be performed unless an
+.B !
+appearing in double quotes is escaped using a backslash.
+The backslash preceding the
+.B !
+is not removed.
+.PP
+The special parameters
+.B *
+and
+.B @
+have special meaning when in double
+quotes (see
+.SM
+.B PARAMETERS
+below).
+.PP
+Words of the form \fB$\fP\(aq\fIstring\fP\(aq are treated specially.  The
+word expands to \fIstring\fP, with backslash-escaped characters replaced
+as specified by the ANSI C standard.  Backslash escape sequences, if
+present, are decoded as follows:
+.RS
+.PD 0
+.TP
+.B \ea
+alert (bell)
+.TP
+.B \eb
+backspace
+.TP
+.B \ee
+.TP
+.B \eE
+an escape character
+.TP
+.B \ef
+form feed
+.TP
+.B \en
+new line
+.TP
+.B \er
+carriage return
+.TP
+.B \et
+horizontal tab
+.TP
+.B \ev
+vertical tab
+.TP
+.B \e\e
+backslash
+.TP
+.B \e\(aq
+single quote
+.TP
+.B \e\(dq
+double quote
+.TP
+.B \e?
+question mark
+.TP
+.B \e\fInnn\fP
+the eight-bit character whose value is the octal value \fInnn\fP
+(one to three octal digits)
+.TP
+.B \ex\fIHH\fP
+the eight-bit character whose value is the hexadecimal value \fIHH\fP
+(one or two hex digits)
+.TP
+.B \eu\fIHHHH\fP
+the Unicode (ISO/IEC 10646) character whose value is the hexadecimal value
+\fIHHHH\fP (one to four hex digits)
+.TP
+.B \eU\fIHHHHHHHH\fP
+the Unicode (ISO/IEC 10646) character whose value is the hexadecimal value
+\fIHHHHHHHH\fP (one to eight hex digits)
+.TP
+.B \ec\fIx\fP
+a control-\fIx\fP character
+.PD
+.RE
+.LP
+The expanded result is single-quoted, as if the dollar sign had
+not been present.
+.PP
+A double-quoted string preceded by a dollar sign (\fB$\fP\(dq\fIstring\fP\(dq)
+will cause the string to be translated according to the current locale.
+The \fIgettext\fP infrastructure performs the message catalog lookup and
+translation, using the \fBLC_MESSAGES\fP and \fBTEXTDOMAIN\fP shell
+variables.
+If the current locale is \fBC\fP or \fBPOSIX\fP,
+or if there are no translations available,
+the dollar sign is ignored.
+If the string is translated and replaced, the replacement is
+double-quoted.
+.SH PARAMETERS
+A
+.I parameter
+is an entity that stores values.
+It can be a
+.IR name ,
+a number, or one of the special characters listed below under
+.BR "Special Parameters" .
+A
+.I variable
+is a parameter denoted by a
+.IR name .
+A variable has a \fIvalue\fP and zero or more \fIattributes\fP.
+Attributes are assigned using the
+.B declare
+builtin command (see
+.B declare
+below in
+.SM
+.BR "SHELL BUILTIN COMMANDS" ).
+.PP
+A parameter is set if it has been assigned a value.  The null string is
+a valid value.  Once a variable is set, it may be unset only by using
+the
+.B unset
+builtin command (see
+.SM
+.B SHELL BUILTIN COMMANDS
+below).
+.PP
+A
+.I variable
+may be assigned to by a statement of the form
+.RS
+.PP
+\fIname\fP=[\fIvalue\fP]
+.RE
+.PP
+If
+.I value
+is not given, the variable is assigned the null string.  All
+.I values
+undergo tilde expansion, parameter and variable expansion,
+command substitution, arithmetic expansion, and quote
+removal (see
+.SM
+.B EXPANSION
+below).  If the variable has its
+.B integer
+attribute set, then
+.I value
+is evaluated as an arithmetic expression even if the $((...)) expansion is
+not used (see
+.B "Arithmetic Expansion"
+below).
+Word splitting is not performed, with the exception
+of \fB"$@"\fP as explained below under
+.BR "Special Parameters" .
+Pathname expansion is not performed.
+Assignment statements may also appear as arguments to the
+.BR alias ,
+.BR declare ,
+.BR typeset ,
+.BR export ,
+.BR readonly ,
+and
+.B local
+builtin commands (\fIdeclaration\fP commands).
+When in \fIposix mode\fP, these builtins may appear in a command after
+one or more instances of the \fBcommand\fP builtin and retain these
+assignment statement properties.
+.PP
+In the context where an assignment statement is assigning a value
+to a shell variable or array index, the += operator can be used to
+append to or add to the variable's previous value.
+This includes arguments to builtin commands such as \fBdeclare\fP that
+accept assignment statements (\fIdeclaration\fP commands).
+When += is applied to a variable for which the \fIinteger\fP attribute has been
+set, \fIvalue\fP is evaluated as an arithmetic expression and added to the
+variable's current value, which is also evaluated.
+When += is applied to an array variable using compound assignment (see
+.B Arrays
+below), the
+variable's value is not unset (as it is when using =), and new values are
+appended to the array beginning at one greater than the array's maximum index
+(for indexed arrays) or added as additional key\-value pairs in an
+associative array.
+When applied to a string-valued variable, \fIvalue\fP is expanded and
+appended to the variable's value.
+.PP
+A variable can be assigned the \fInameref\fP attribute using the
+\fB\-n\fP option to the \fBdeclare\fP or \fBlocal\fP builtin commands
+(see the descriptions of \fBdeclare\fP and \fBlocal\fP below)
+to create a \fInameref\fP, or a reference to another variable.
+This allows variables to be manipulated indirectly.
+Whenever the nameref variable is referenced, assigned to, unset, or has
+its attributes modified (other than using or changing the \fInameref\fP
+attribute itself), the
+operation is actually performed on the variable specified by the nameref
+variable's value.
+A nameref is commonly used within shell functions to refer to a variable
+whose name is passed as an argument to the function.
+For instance, if a variable name is passed to a shell function as its first
+argument, running
+.sp .5
+.RS
+.if t \f(CWdeclare -n ref=$1\fP
+.if n declare -n ref=$1
+.RE
+.sp .5
+inside the function creates a nameref variable \fBref\fP whose value is
+the variable name passed as the first argument.
+References and assignments to \fBref\fP, and changes to its attributes,
+are treated as references, assignments, and attribute modifications
+to the variable whose name was passed as \fB$1\fP.
+If the control variable in a \fBfor\fP loop has the nameref attribute,
+the list of words can be a list of shell variables, and a name reference
+will be established for each word in the list, in turn, when the loop is
+executed.
+Array variables cannot be given the \fBnameref\fP attribute.
+However, nameref variables can reference array variables and subscripted
+array variables.
+Namerefs can be unset using the \fB\-n\fP option to the \fBunset\fP builtin.
+Otherwise, if \fBunset\fP is executed with the name of a nameref variable
+as an argument, the variable referenced by the nameref variable will be unset.
+.SS Positional Parameters
+A
+.I positional parameter
+is a parameter denoted by one or more
+digits, other than the single digit 0.  Positional parameters are
+assigned from the shell's arguments when it is invoked,
+and may be reassigned using the
+.B set
+builtin command.  Positional parameters may not be assigned to
+with assignment statements.  The positional parameters are
+temporarily replaced when a shell function is executed (see
+.SM
+.B FUNCTIONS
+below).
+.PP
+When a positional parameter consisting of more than a single
+digit is expanded, it must be enclosed in braces (see
+.SM
+.B EXPANSION
+below).
+.SS Special Parameters
+The shell treats several parameters specially.  These parameters may
+only be referenced; assignment to them is not allowed.
+.PD 0
+.TP
+.B *
+Expands to the positional parameters, starting from one.
+When the expansion is not within double quotes, each positional parameter
+expands to a separate word.
+In contexts where it is performed, those words
+are subject to further word splitting and pathname expansion.
+When the expansion occurs within double quotes, it expands to a single word
+with the value of each parameter separated by the first character of the
+.SM
+.B IFS
+special variable.  That is, "\fB$*\fP" is equivalent
+to "\fB$1\fP\fIc\fP\fB$2\fP\fIc\fP\fB...\fP", where
+.I c
+is the first character of the value of the
+.SM
+.B IFS
+variable.  If
+.SM
+.B IFS
+is unset, the parameters are separated by spaces.
+If
+.SM
+.B IFS
+is null, the parameters are joined without intervening separators.
+.TP
+.B @
+Expands to the positional parameters, starting from one.
+In contexts where word splitting is performed, this expands each
+positional parameter to a separate word; if not within double
+quotes, these words are subject to word splitting.
+In contexts where word splitting is not performed,
+this expands to a single word
+with each positional parameter separated by a space.
+When the
+expansion occurs within double quotes, each parameter expands to a
+separate word.  That is, "\fB$@\fP" is equivalent to
+"\fB$1\fP" "\fB$2\fP" ...
+If the double-quoted expansion occurs within a word, the expansion of
+the first parameter is joined with the beginning part of the original
+word, and the expansion of the last parameter is joined with the last
+part of the original word.
+When there are no positional parameters, "\fB$@\fP" and
+.B $@
+expand to nothing (i.e., they are removed).
+.TP
+.B #
+Expands to the number of positional parameters in decimal.
+.TP
+.B ?
+Expands to the exit status of the most recently executed foreground
+pipeline.
+.TP
+.B \-
+Expands to the current option flags as specified upon invocation,
+by the
+.B set
+builtin command, or those set by the shell itself
+(such as the
+.B \-i
+option).
+.TP
+.B $
+Expands to the process ID of the shell.  In a () subshell, it
+expands to the process ID of the current shell, not the
+subshell.
+.TP
+.B !
+Expands to the process ID of the job most recently placed into the
+background, whether executed as an asynchronous command or using
+the \fBbg\fP builtin (see
+.SM
+.B "JOB CONTROL"
+below).
+.TP
+.B 0
+Expands to the name of the shell or shell script.  This is set at
+shell initialization.  If
+.B bash
+is invoked with a file of commands,
+.B $0
+is set to the name of that file.  If
+.B bash
+is started with the
+.B \-c
+option, then
+.B $0
+is set to the first argument after the string to be
+executed, if one is present.  Otherwise, it is set
+to the filename used to invoke
+.BR bash ,
+as given by argument zero.
+.PD
+.SS Shell Variables
+The following variables are set by the shell:
+.PP
+.PD 0
+.TP
+.B _
+At shell startup, set to the pathname used to invoke the
+shell or shell script being executed as passed in the environment
+or argument list.
+Subsequently, expands to the last argument to the previous simple
+command executed in the foreground, after expansion.
+Also set to the full pathname used to invoke each command executed
+and placed in the environment exported to that command.
+When checking mail, this parameter holds the name of the mail file
+currently being checked.
+.TP
+.B BASH
+Expands to the full filename used to invoke this instance of
+.BR bash .
+.TP
+.B BASHOPTS
+A colon-separated list of enabled shell options.  Each word in
+the list is a valid argument for the
+.B \-s
+option to the
+.B shopt
+builtin command (see
+.SM
+.B "SHELL BUILTIN COMMANDS"
+below).  The options appearing in
+.SM
+.B BASHOPTS
+are those reported as
+.I on
+by \fBshopt\fP.
+If this variable is in the environment when
+.B bash
+starts up, each shell option in the list will be enabled before
+reading any startup files.
+This variable is read-only.
+.TP
+.B BASHPID
+Expands to the process ID of the current \fBbash\fP process.
+This differs from \fB$$\fP under certain circumstances, such as subshells
+that do not require \fBbash\fP to be re-initialized.
+Assignments to
+.SM
+.B BASHPID
+have no effect.
+If
+.B BASHPID
+is unset, it loses its special properties, even if it is
+subsequently reset.
+.TP
+.B BASH_ALIASES
+An associative array variable whose members correspond to the internal
+list of aliases as maintained by the \fBalias\fP builtin.
+Elements added to this array appear in the alias list; however,
+unsetting array elements currently does not cause aliases to be removed
+from the alias list.
+If
+.B BASH_ALIASES
+is unset, it loses its special properties, even if it is
+subsequently reset.
+.TP
+.B BASH_ARGC
+An array variable whose values are the number of parameters in each
+frame of the current \fBbash\fP execution call stack.
+The number of
+parameters to the current subroutine (shell function or script executed
+with \fB.\fP or \fBsource\fP) is at the top of the stack.
+When a subroutine is executed, the number of parameters passed is pushed onto
+.SM
+.BR BASH_ARGC .
+The shell sets
+.SM
+.B BASH_ARGC
+only when in extended debugging mode (see the description of the
+.B extdebug
+option to the
+.B shopt
+builtin below).
+Setting \fBextdebug\fP after the shell has started to execute a script,
+or referencing this variable when \fBextdebug\fP is not set,
+may result in inconsistent values.
+.TP
+.B BASH_ARGV
+An array variable containing all of the parameters in the current \fBbash\fP
+execution call stack.  The final parameter of the last subroutine call
+is at the top of the stack; the first parameter of the initial call is
+at the bottom.  When a subroutine is executed, the parameters supplied
+are pushed onto
+.SM
+.BR BASH_ARGV .
+The shell sets
+.SM
+.B BASH_ARGV
+only when in extended debugging mode
+(see the description of the
+.B extdebug
+option to the
+.B shopt
+builtin below).
+Setting \fBextdebug\fP after the shell has started to execute a script,
+or referencing this variable when \fBextdebug\fP is not set,
+may result in inconsistent values.
+.TP
+.B BASH_ARGV0
+When referenced, this variable expands to the name of the shell or shell
+script (identical to
+.BR $0 ;
+see the description of special parameter 0 above).
+Assignment to
+.B BASH_ARGV0
+causes the value assigned to also be assigned to \fB$0\fP.
+If
+.B BASH_ARGV0
+is unset, it loses its special properties, even if it is
+subsequently reset.
+.TP
+.B BASH_CMDS
+An associative array variable whose members correspond to the internal
+hash table of commands as maintained by the \fBhash\fP builtin.
+Elements added to this array appear in the hash table; however,
+unsetting array elements currently does not cause command names to be removed
+from the hash table.
+If
+.B BASH_CMDS
+is unset, it loses its special properties, even if it is
+subsequently reset.
+.TP
+.B BASH_COMMAND
+The command currently being executed or about to be executed, unless the
+shell is executing a command as the result of a trap,
+in which case it is the command executing at the time of the trap.
+If
+.B BASH_COMMAND
+is unset, it loses its special properties, even if it is
+subsequently reset.
+.TP
+.B BASH_EXECUTION_STRING
+The command argument to the \fB\-c\fP invocation option.
+.TP
+.B BASH_LINENO
+An array variable whose members are the line numbers in source files
+where each corresponding member of
+.SM
+.B FUNCNAME
+was invoked.
+\fB${BASH_LINENO[\fP\fI$i\fP\fB]}\fP is the line number in the source
+file (\fB${BASH_SOURCE[\fP\fI$i+1\fP\fB]}\fP) where
+\fB${FUNCNAME[\fP\fI$i\fP\fB]}\fP was called
+(or \fB${BASH_LINENO[\fP\fI$i-1\fP\fB]}\fP if referenced within another
+shell function).
+Use
+.SM
+.B LINENO
+to obtain the current line number.
+.TP
+.B BASH_LOADABLES_PATH
+A colon-separated list of directories in which the shell looks for
+dynamically loadable builtins specified by the
+.B enable
+command.
+.TP
+.B BASH_REMATCH
+An array variable whose members are assigned by the \fB=~\fP binary
+operator to the \fB[[\fP conditional command.
+The element with index 0 is the portion of the string
+matching the entire regular expression.
+The element with index \fIn\fP is the portion of the
+string matching the \fIn\fPth parenthesized subexpression.
+.TP
+.B BASH_SOURCE
+An array variable whose members are the source filenames
+where the corresponding shell function names in the
+.SM
+.B FUNCNAME
+array variable are defined.
+The shell function
+\fB${FUNCNAME[\fP\fI$i\fP\fB]}\fP is defined in the file
+\fB${BASH_SOURCE[\fP\fI$i\fP\fB]}\fP and called from
+\fB${BASH_SOURCE[\fP\fI$i+1\fP\fB]}\fP.
+.TP
+.B BASH_SUBSHELL
+Incremented by one within each subshell or subshell environment when
+the shell begins executing in that environment.
+The initial value is 0.
+If
+.B BASH_SUBSHELL
+is unset, it loses its special properties, even if it is
+subsequently reset.
+.TP
+.B BASH_VERSINFO
+A readonly array variable whose members hold version information for
+this instance of
+.BR bash .
+The values assigned to the array members are as follows:
+.sp .5
+.RS
+.TP 24
+.B BASH_VERSINFO[\fR0\fP]
+The major version number (the \fIrelease\fP).
+.TP
+.B BASH_VERSINFO[\fR1\fP]
+The minor version number (the \fIversion\fP).
+.TP
+.B BASH_VERSINFO[\fR2\fP]
+The patch level.
+.TP
+.B BASH_VERSINFO[\fR3\fP]
+The build version.
+.TP
+.B BASH_VERSINFO[\fR4\fP]
+The release status (e.g., \fIbeta1\fP).
+.TP
+.B BASH_VERSINFO[\fR5\fP]
+The value of
+.SM
+.BR MACHTYPE .
+.RE
+.TP
+.B BASH_VERSION
+Expands to a string describing the version of this instance of
+.BR bash .
+.TP
+.B COMP_CWORD
+An index into \fB${COMP_WORDS}\fP of the word containing the current
+cursor position.
+This variable is available only in shell functions invoked by the
+programmable completion facilities (see \fBProgrammable Completion\fP
+below).
+.TP
+.B COMP_KEY
+The key (or final key of a key sequence) used to invoke the current
+completion function.
+.TP
+.B COMP_LINE
+The current command line.
+This variable is available only in shell functions and external
+commands invoked by the
+programmable completion facilities (see \fBProgrammable Completion\fP
+below).
+.TP
+.B COMP_POINT
+The index of the current cursor position relative to the beginning of
+the current command.
+If the current cursor position is at the end of the current command,
+the value of this variable is equal to \fB${#COMP_LINE}\fP.
+This variable is available only in shell functions and external
+commands invoked by the
+programmable completion facilities (see \fBProgrammable Completion\fP
+below).
+.TP
+.B COMP_TYPE
+Set to an integer value corresponding to the type of completion attempted
+that caused a completion function to be called:
+\fITAB\fP, for normal completion,
+\fI?\fP, for listing completions after successive tabs,
+\fI!\fP, for listing alternatives on partial word completion,
+\fI@\fP, to list completions if the word is not unmodified,
+or
+\fI%\fP, for menu completion.
+This variable is available only in shell functions and external
+commands invoked by the
+programmable completion facilities (see \fBProgrammable Completion\fP
+below).
+.TP
+.B COMP_WORDBREAKS
+The set of characters that the \fBreadline\fP library treats as word
+separators when performing word completion.
+If
+.SM
+.B COMP_WORDBREAKS
+is unset, it loses its special properties, even if it is
+subsequently reset.
+.TP
+.B COMP_WORDS
+An array variable (see \fBArrays\fP below) consisting of the individual
+words in the current command line.
+The line is split into words as \fBreadline\fP would split it, using
+.SM
+.B COMP_WORDBREAKS
+as described above.
+This variable is available only in shell functions invoked by the
+programmable completion facilities (see \fBProgrammable Completion\fP
+below).
+.TP
+.B COPROC
+An array variable (see \fBArrays\fP below) created to hold the file descriptors
+for output from and input to an unnamed coprocess (see \fBCoprocesses\fP
+above).
+.TP
+.B DIRSTACK
+An array variable (see
+.B Arrays
+below) containing the current contents of the directory stack.
+Directories appear in the stack in the order they are displayed by the
+.B dirs
+builtin.
+Assigning to members of this array variable may be used to modify
+directories already in the stack, but the
+.B pushd
+and
+.B popd
+builtins must be used to add and remove directories.
+Assignment to this variable will not change the current directory.
+If
+.SM
+.B DIRSTACK
+is unset, it loses its special properties, even if it is
+subsequently reset.
+.TP
+.B EPOCHREALTIME
+Each time this parameter is referenced, it expands to the number of seconds
+since the Unix Epoch (see \fItime\fP\fR(3)\fP) as a floating point value
+with micro-second granularity.
+Assignments to
+.SM
+.B EPOCHREALTIME
+are ignored.
+If
+.SM
+.B EPOCHREALTIME
+is unset, it loses its special properties, even if it is
+subsequently reset.
+.TP
+.B EPOCHSECONDS
+Each time this parameter is referenced, it expands to the number of seconds
+since the Unix Epoch (see \fItime\fP\fR(3)\fP).
+Assignments to
+.SM
+.B EPOCHSECONDS
+are ignored.
+If
+.SM
+.B EPOCHSECONDS
+is unset, it loses its special properties, even if it is
+subsequently reset.
+.TP
+.B EUID
+Expands to the effective user ID of the current user, initialized at
+shell startup.  This variable is readonly.
+.TP
+.B FUNCNAME
+An array variable containing the names of all shell functions
+currently in the execution call stack.
+The element with index 0 is the name of any currently-executing
+shell function.
+The bottom-most element (the one with the highest index) is
+.if t \f(CW"main"\fP.
+.if n "main".
+This variable exists only when a shell function is executing.
+Assignments to
+.SM
+.B FUNCNAME
+have no effect.
+If
+.SM
+.B FUNCNAME
+is unset, it loses its special properties, even if it is
+subsequently reset.
+.if t .sp 0.5
+.if n .sp 1
+This variable can be used with \fBBASH_LINENO\fP and \fBBASH_SOURCE\fP.
+Each element of \fBFUNCNAME\fP has corresponding elements in
+\fBBASH_LINENO\fP and \fBBASH_SOURCE\fP to describe the call stack.
+For instance, \fB${FUNCNAME[\fP\fI$i\fP\fB]}\fP was called from the file
+\fB${BASH_SOURCE[\fP\fI$i+1\fP\fB]}\fP at line number
+\fB${BASH_LINENO[\fP\fI$i\fP\fB]}\fP.
+The \fBcaller\fP builtin displays the current call stack using this
+information.
+.TP
+.B GROUPS
+An array variable containing the list of groups of which the current
+user is a member.
+Assignments to
+.SM
+.B GROUPS
+have no effect.
+If
+.SM
+.B GROUPS
+is unset, it loses its special properties, even if it is
+subsequently reset.
+.TP
+.B HISTCMD
+The history number, or index in the history list, of the current
+command.
+Assignments to
+.SM
+.B HISTCMD
+are ignored.
+If
+.SM
+.B HISTCMD
+is unset, it loses its special properties, even if it is
+subsequently reset.
+.TP
+.B HOSTNAME
+Automatically set to the name of the current host.
+.TP
+.B HOSTTYPE
+Automatically set to a string that uniquely
+describes the type of machine on which
+.B bash
+is executing.
+The default is system-dependent.
+.TP
+.B LINENO
+Each time this parameter is referenced, the shell substitutes
+a decimal number representing the current sequential line number
+(starting with 1) within a script or function.  When not in a
+script or function, the value substituted is not guaranteed to
+be meaningful.
+If
+.SM
+.B LINENO
+is unset, it loses its special properties, even if it is
+subsequently reset.
+.TP
+.B MACHTYPE
+Automatically set to a string that fully describes the system
+type on which
+.B bash
+is executing, in the standard GNU \fIcpu-company-system\fP format.
+The default is system-dependent.
+.TP
+.B MAPFILE
+An array variable (see \fBArrays\fP below) created to hold the text
+read by the \fBmapfile\fP builtin when no variable name is supplied.
+.TP
+.B OLDPWD
+The previous working directory as set by the
+.B cd
+command.
+.TP
+.B OPTARG
+The value of the last option argument processed by the
+.B getopts
+builtin command (see
+.SM
+.B SHELL BUILTIN COMMANDS
+below).
+.TP
+.B OPTIND
+The index of the next argument to be processed by the
+.B getopts
+builtin command (see
+.SM
+.B SHELL BUILTIN COMMANDS
+below).
+.TP
+.B OSTYPE
+Automatically set to a string that
+describes the operating system on which
+.B bash
+is executing.
+The default is system-dependent.
+.TP
+.B PIPESTATUS
+An array variable (see
+.B Arrays
+below) containing a list of exit status values from the processes
+in the most-recently-executed foreground pipeline (which may
+contain only a single command).
+.TP
+.B PPID
+The process ID of the shell's parent.  This variable is readonly.
+.TP
+.B PWD
+The current working directory as set by the
+.B cd
+command.
+.TP
+.B RANDOM
+Each time this parameter is referenced, it expands to a random integer
+between 0 and 32767.
+Assigning
+a value to
+.SM
+.BR RANDOM
+initializes (seeds) the sequence of random numbers.
+If
+.SM
+.B RANDOM
+is unset, it loses its special properties, even if it is
+subsequently reset.
+.TP
+.B READLINE_LINE
+The contents of the
+.B readline
+line buffer, for use with
+.if t \f(CWbind -x\fP
+.if n "bind -x"
+(see
+.SM
+.B "SHELL BUILTIN COMMANDS"
+below).
+.TP
+.B READLINE_MARK
+The position of the mark (saved insertion point) in the
+.B readline
+line buffer, for use with
+.if t \f(CWbind -x\fP
+.if n "bind -x"
+(see
+.SM
+.B "SHELL BUILTIN COMMANDS"
+below).
+The characters between the insertion point and the mark are often
+called the \fIregion\fP.
+.TP
+.B READLINE_POINT
+The position of the insertion point in the
+.B readline
+line buffer, for use with
+.if t \f(CWbind -x\fP
+.if n "bind -x"
+(see
+.SM
+.B "SHELL BUILTIN COMMANDS"
+below).
+.TP
+.B REPLY
+Set to the line of input read by the
+.B read
+builtin command when no arguments are supplied.
+.TP
+.B SECONDS
+Each time this parameter is
+referenced, the number of seconds since shell invocation is returned.  If a
+value is assigned to
+.SM
+.BR SECONDS ,
+the value returned upon subsequent
+references is
+the number of seconds since the assignment plus the value assigned.
+The number of seconds at shell invocation and the current time is always
+determined by querying the system clock.
+If
+.SM
+.B SECONDS
+is unset, it loses its special properties, even if it is
+subsequently reset.
+.TP
+.B SHELLOPTS
+A colon-separated list of enabled shell options.  Each word in
+the list is a valid argument for the
+.B \-o
+option to the
+.B set
+builtin command (see
+.SM
+.B "SHELL BUILTIN COMMANDS"
+below).  The options appearing in
+.SM
+.B SHELLOPTS
+are those reported as
+.I on
+by \fBset \-o\fP.
+If this variable is in the environment when
+.B bash
+starts up, each shell option in the list will be enabled before
+reading any startup files.
+This variable is read-only.
+.TP
+.B SHLVL
+Incremented by one each time an instance of
+.B bash
+is started.
+.TP
+.B SRANDOM
+This variable expands to a 32-bit pseudo-random number each time it is
+referenced. The random number generator is not linear on systems that
+support \f(CW/dev/urandom\fP or \fIarc4random\fP, so each returned number
+has no relationship to the numbers preceding it.
+The random number generator cannot be seeded, so assignments to this
+variable have no effect.
+If
+.SM
+.B SRANDOM
+is unset, it loses its special properties,
+even if it is subsequently reset.
+.TP
+.B UID
+Expands to the user ID of the current user, initialized at shell startup.
+This variable is readonly.
+.PD
+.PP
+The following variables are used by the shell.  In some cases,
+.B bash
+assigns a default value to a variable; these cases are noted
+below.
+.PP
+.PD 0
+.TP
+.B BASH_COMPAT
+The value is used to set the shell's compatibility level.
+See
+.SM
+.B SHELL COMPATIBILITY MODE
+below for a description of the various compatibility
+levels and their effects.
+The value may be a decimal number (e.g., 4.2) or an integer (e.g., 42)
+corresponding to the desired compatibility level.
+If \fBBASH_COMPAT\fP is unset or set to the empty string, the compatibility
+level is set to the default for the current version.
+If \fBBASH_COMPAT\fP is set to a value that is not one of the valid
+compatibility levels, the shell prints an error message and sets the
+compatibility level to the default for the current version.
+The valid values correspond to the compatibility levels
+described below under
+.SM
+.BR BSHELL COMPATIBILITY MODE .
+For example, 4.2 and 42 are valid values that correspond
+to the \fBcompat42\fP \fBshopt\fP option
+and set the compatibility level to 42.
+The current version is also a valid value.
+.TP
+.B BASH_ENV
+If this parameter is set when \fBbash\fP is executing a shell script,
+its value is interpreted as a filename containing commands to
+initialize the shell, as in
+.IR ~/.bashrc .
+The value of
+.SM
+.B BASH_ENV
+is subjected to parameter expansion, command substitution, and arithmetic
+expansion before being interpreted as a filename.
+.SM
+.B PATH
+is not used to search for the resultant filename.
+.TP
+.B BASH_XTRACEFD
+If set to an integer corresponding to a valid file descriptor, \fBbash\fP
+will write the trace output generated when
+.if t \f(CWset -x\fP
+.if n \fIset -x\fP
+is enabled to that file descriptor.
+The file descriptor is closed when
+.SM
+.B BASH_XTRACEFD
+is unset or assigned a new value.
+Unsetting
+.SM
+.B BASH_XTRACEFD
+or assigning it the empty string causes the
+trace output to be sent to the standard error.
+Note that setting
+.SM
+.B BASH_XTRACEFD
+to 2 (the standard error file
+descriptor) and then unsetting it will result in the standard error
+being closed.
+.TP
+.B CDPATH
+The search path for the
+.B cd
+command.
+This is a colon-separated list of directories in which the shell looks
+for destination directories specified by the
+.B cd
+command.
+A sample value is
+.if t \f(CW".:~:/usr"\fP.
+.if n ".:~:/usr".
+.TP
+.B CHILD_MAX
+Set the number of exited child status values for the shell to remember.
+Bash will not allow this value to be decreased below a POSIX-mandated
+minimum, and there is a maximum value (currently 8192) that this may
+not exceed.
+The minimum value is system-dependent.
+.TP
+.B COLUMNS
+Used by the \fBselect\fP compound command to determine the terminal width
+when printing selection lists.
+Automatically set if the
+.B checkwinsize
+option is enabled or in an interactive shell upon receipt of a
+.SM
+.BR SIGWINCH .
+.TP
+.B COMPREPLY
+An array variable from which \fBbash\fP reads the possible completions
+generated by a shell function invoked by the programmable completion
+facility (see \fBProgrammable Completion\fP below).
+Each array element contains one possible completion.
+.TP
+.B EMACS
+If \fBbash\fP finds this variable in the environment when the shell starts
+with value
+.if t \f(CWt\fP,
+.if n "t",
+it assumes that the shell is running in an Emacs shell buffer and disables
+line editing.
+.TP
+.B ENV
+Expanded and executed similarly to
+.SM
+.B BASH_ENV
+(see \fBINVOCATION\fP above)
+when an interactive shell is invoked in \fIposix mode\fP.
+.TP
+.B EXECIGNORE
+A colon-separated list of shell patterns (see \fBPattern Matching\fP)
+defining the list of filenames to be ignored by command search using
+\fBPATH\fP.
+Files whose full pathnames match one of these patterns are not considered
+executable files for the purposes of completion and command execution
+via \fBPATH\fP lookup.
+This does not affect the behavior of the \fB[\fP, \fBtest\fP, and \fB[[\fP
+commands.
+Full pathnames in the command hash table are not subject to \fBEXECIGNORE\fP.
+Use this variable to ignore shared library files that have the executable
+bit set, but are not executable files.
+The pattern matching honors the setting of the \fBextglob\fP shell
+option.
+.TP
+.B FCEDIT
+The default editor for the
+.B fc
+builtin command.
+.TP
+.B FIGNORE
+A colon-separated list of suffixes to ignore when performing
+filename completion (see
+.SM
+.B READLINE
+below).
+A filename whose suffix matches one of the entries in
+.SM
+.B FIGNORE
+is excluded from the list of matched filenames.
+A sample value is
+.if t \f(CW".o:~"\fP.
+.if n ".o:~".
+.TP
+.B FUNCNEST
+If set to a numeric value greater than 0, defines a maximum function
+nesting level.  Function invocations that exceed this nesting level
+will cause the current command to abort.
+.TP
+.B GLOBIGNORE
+A colon-separated list of patterns defining the set of file names to
+be ignored by pathname expansion.
+If a file name matched by a pathname expansion pattern also matches one
+of the patterns in
+.SM
+.BR GLOBIGNORE ,
+it is removed from the list of matches.
+.TP
+.B HISTCONTROL
+A colon-separated list of values controlling how commands are saved on
+the history list.
+If the list of values includes
+.IR ignorespace ,
+lines which begin with a
+.B space
+character are not saved in the history list.
+A value of
+.I ignoredups
+causes lines matching the previous history entry to not be saved.
+A value of
+.I ignoreboth
+is shorthand for \fIignorespace\fP and \fIignoredups\fP.
+A value of
+.I erasedups
+causes all previous lines matching the current line to be removed from
+the history list before that line is saved.
+Any value not in the above list is ignored.
+If
+.SM
+.B HISTCONTROL
+is unset, or does not include a valid value,
+all lines read by the shell parser are saved on the history list,
+subject to the value of
+.SM
+.BR HISTIGNORE .
+The second and subsequent lines of a multi-line compound command are
+not tested, and are added to the history regardless of the value of
+.SM
+.BR HISTCONTROL .
+.TP
+.B HISTFILE
+The name of the file in which command history is saved (see
+.SM
+.B HISTORY
+below).  The default value is \fI~/.bash_history\fP.  If unset, the
+command history is not saved when a shell exits.
+.TP
+.B HISTFILESIZE
+The maximum number of lines contained in the history file.  When this
+variable is assigned a value, the history file is truncated, if
+necessary,
+to contain no more than that number of lines by removing the oldest entries.
+The history file is also truncated to this size after
+writing it when a shell exits.
+If the value is 0, the history file is truncated to zero size.
+Non-numeric values and numeric values less than zero inhibit truncation.
+The shell sets the default value to the value of \fBHISTSIZE\fP
+after reading any startup files.
+.TP
+.B HISTIGNORE
+A colon-separated list of patterns used to decide which command lines
+should be saved on the history list.  Each pattern is anchored at the
+beginning of the line and must match the complete line (no implicit
+`\fB*\fP' is appended).  Each pattern is tested against the line
+after the checks specified by
+.SM
+.B HISTCONTROL
+are applied.
+In addition to the normal shell pattern matching characters, `\fB&\fP'
+matches the previous history line.  `\fB&\fP' may be escaped using a
+backslash; the backslash is removed before attempting a match.
+The second and subsequent lines of a multi-line compound command are
+not tested, and are added to the history regardless of the value of
+.SM
+.BR HISTIGNORE .
+The pattern matching honors the setting of the \fBextglob\fP shell
+option.
+.TP
+.B HISTSIZE
+The number of commands to remember in the command history (see
+.SM
+.B HISTORY
+below).
+If the value is 0, commands are not saved in the history list.
+Numeric values less than zero result in every command being saved
+on the history list (there is no limit).
+The shell sets the default value to 500 after reading any startup files.
+.TP
+.B HISTTIMEFORMAT
+If this variable is set and not null, its value is used as a format string
+for \fIstrftime\fP(3) to print the time stamp associated with each history
+entry displayed by the \fBhistory\fP builtin.
+If this variable is set, time stamps are written to the history file so
+they may be preserved across shell sessions.
+This uses the history comment character to distinguish timestamps from
+other history lines.
+.TP
+.B HOME
+The home directory of the current user; the default argument for the
+\fBcd\fP builtin command.
+The value of this variable is also used when performing tilde expansion.
+.TP
+.B HOSTFILE
+Contains the name of a file in the same format as
+.FN /etc/hosts
+that should be read when the shell needs to complete a
+hostname.
+The list of possible hostname completions may be changed while the
+shell is running;
+the next time hostname completion is attempted after the
+value is changed,
+.B bash
+adds the contents of the new file to the existing list.
+If
+.SM
+.B HOSTFILE
+is set, but has no value, or does not name a readable file,
+\fBbash\fP attempts to read
+.FN /etc/hosts
+to obtain the list of possible hostname completions.
+When
+.SM
+.B HOSTFILE
+is unset, the hostname list is cleared.
+.TP
+.B IFS
+The
+.I Internal Field Separator
+that is used
+for word splitting after expansion and to
+split lines into words with the
+.B read
+builtin command.  The default value is
+``<space><tab><newline>''.
+.TP
+.B IGNOREEOF
+Controls the
+action of an interactive shell on receipt of an
+.SM
+.B EOF
+character as the sole input.  If set, the value is the number of
+consecutive
+.SM
+.B EOF
+characters which must be
+typed as the first characters on an input line before
+.B bash
+exits.  If the variable exists but does not have a numeric value, or
+has no value, the default value is 10.  If it does not exist,
+.SM
+.B EOF
+signifies the end of input to the shell.
+.TP
+.B INPUTRC
+The filename for the
+.B readline
+startup file, overriding the default of
+.FN ~/.inputrc
+(see
+.SM
+.B READLINE
+below).
+.TP
+.B INSIDE_EMACS
+If this variable appears in the environment when the shell starts,
+\fBbash\fP assumes that it is running inside an Emacs shell buffer
+and may disable line editing, depending on the value of \fBTERM\fP.
+.TP
+.B LANG
+Used to determine the locale category for any category not specifically
+selected with a variable starting with \fBLC_\fP.
+.TP
+.B LC_ALL
+This variable overrides the value of
+.SM
+.B LANG
+and any other
+\fBLC_\fP variable specifying a locale category.
+.TP
+.B LC_COLLATE
+This variable determines the collation order used when sorting the
+results of pathname expansion, and determines the behavior of range
+expressions, equivalence classes, and collating sequences within
+pathname expansion and pattern matching.
+.TP
+.B LC_CTYPE
+This variable determines the interpretation of characters and the
+behavior of character classes within pathname expansion and pattern
+matching.
+.TP
+.B LC_MESSAGES
+This variable determines the locale used to translate double-quoted
+strings preceded by a \fB$\fP.
+.TP
+.B LC_NUMERIC
+This variable determines the locale category used for number formatting.
+.TP
+.B LC_TIME
+This variable determines the locale category used for data and time
+formatting.
+.TP
+.B LINES
+Used by the \fBselect\fP compound command to determine the column length
+for printing selection lists.
+Automatically set if the
+.B checkwinsize
+option is enabled or in an interactive shell upon receipt of a
+.SM
+.BR SIGWINCH .
+.TP
+.B MAIL
+If this parameter is set to a file or directory name and the
+.SM
+.B MAILPATH
+variable is not set,
+.B bash
+informs the user of the arrival of mail in the specified file or
+Maildir-format directory.
+.TP
+.B MAILCHECK
+Specifies how
+often (in seconds)
+.B bash
+checks for mail.  The default is 60 seconds.  When it is time to check
+for mail, the shell does so before displaying the primary prompt.
+If this variable is unset, or set to a value that is not a number
+greater than or equal to zero, the shell disables mail checking.
+.TP
+.B MAILPATH
+A colon-separated list of filenames to be checked for mail.
+The message to be printed when mail arrives in a particular file
+may be specified by separating the filename from the message with a `?'.
+When used in the text of the message, \fB$_\fP expands to the name of
+the current mailfile.
+Example:
+.RS
+.PP
+\fBMAILPATH\fP=\(aq/var/mail/bfox?"You have mail":~/shell\-mail?"$_ has mail!"\(aq
+.PP
+.B Bash
+can be configured to supply
+a default value for this variable (there is no value by default),
+but the location of the user
+mail files that it uses is system dependent (e.g., /var/mail/\fB$USER\fP).
+.RE
+.TP
+.B OPTERR
+If set to the value 1,
+.B bash
+displays error messages generated by the
+.B getopts
+builtin command (see
+.SM
+.B SHELL BUILTIN COMMANDS
+below).
+.SM
+.B OPTERR
+is initialized to 1 each time the shell is invoked or a shell
+script is executed.
+.TP
+.B PATH
+The search path for commands.  It
+is a colon-separated list of directories in which
+the shell looks for commands (see
+.SM
+.B COMMAND EXECUTION
+below).
+A zero-length (null) directory name in the value of
+.SM
+.B PATH
+indicates the current directory.
+A null directory name may appear as two adjacent colons, or as an initial
+or trailing colon.
+The default path is system-dependent,
+and is set by the administrator who installs
+.BR bash .
+A common value is
+.na
+.if t \f(CW/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin\fP.
+.if n ``/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin''.
+.ad
+.TP
+.B POSIXLY_CORRECT
+If this variable is in the environment when \fBbash\fP starts, the shell
+enters \fIposix mode\fP before reading the startup files, as if the
+.B \-\-posix
+invocation option had been supplied.  If it is set while the shell is
+running, \fBbash\fP enables \fIposix mode\fP, as if the command
+.if t \f(CWset -o posix\fP
+.if n \fIset -o posix\fP
+had been executed.
+When the shell enters \fIposix mode\fP, it sets this variable if it was
+not already set.
+.TP
+.B PROMPT_COMMAND
+If this variable is set, and is an array,
+the value of each set element is executed as a command
+prior to issuing each primary prompt.
+If this is set but not an array variable, 
+its value is used as a command to execute instead.
+.TP
+.B PROMPT_DIRTRIM
+If set to a number greater than zero, the value is used as the number of
+trailing directory components to retain when expanding the \fB\ew\fP and
+\fB\eW\fP prompt string escapes (see
+.SM
+.B PROMPTING
+below).  Characters removed are replaced with an ellipsis.
+.TP
+.B PS0
+The value of this parameter is expanded (see
+.SM
+.B PROMPTING
+below) and displayed by interactive shells after reading a command
+and before the command is executed.
+.TP
+.B PS1
+The value of this parameter is expanded (see
+.SM
+.B PROMPTING
+below) and used as the primary prompt string.  The default value is
+``\fB\es\-\ev\e$ \fP''.
+.TP
+.B PS2
+The value of this parameter is expanded as with
+.SM
+.B PS1
+and used as the secondary prompt string.  The default is
+``\fB> \fP''.
+.TP
+.B PS3
+The value of this parameter is used as the prompt for the
+.B select
+command (see
+.SM
+.B SHELL GRAMMAR
+above).
+.TP
+.B PS4
+The value of this parameter is expanded as with
+.SM
+.B PS1
+and the value is printed before each command
+.B bash
+displays during an execution trace.  The first character of
+the expanded value of
+.SM
+.B PS4
+is replicated multiple times, as necessary, to indicate multiple
+levels of indirection.  The default is ``\fB+ \fP''.
+.TP
+.B SHELL
+This variable expands to the full pathname to the shell.
+If it is not set when the shell starts,
+.B bash
+assigns to it the full pathname of the current user's login shell.
+.TP
+.B TIMEFORMAT
+The value of this parameter is used as a format string specifying
+how the timing information for pipelines prefixed with the
+.B time
+reserved word should be displayed.
+The \fB%\fP character introduces an escape sequence that is
+expanded to a time value or other information.
+The escape sequences and their meanings are as follows; the
+braces denote optional portions.
+.sp .5
+.RS
+.PD 0
+.TP 10
+.B %%
+A literal \fB%\fP.
+.TP
+.B %[\fIp\fP][l]R
+The elapsed time in seconds.
+.TP
+.B %[\fIp\fP][l]U
+The number of CPU seconds spent in user mode.
+.TP
+.B %[\fIp\fP][l]S
+The number of CPU seconds spent in system mode.
+.TP
+.B %P
+The CPU percentage, computed as (%U + %S) / %R.
+.PD
+.RE
+.IP
+The optional \fIp\fP is a digit specifying the \fIprecision\fP,
+the number of fractional digits after a decimal point.
+A value of 0 causes no decimal point or fraction to be output.
+At most three places after the decimal point may be specified;
+values of \fIp\fP greater than 3 are changed to 3.
+If \fIp\fP is not specified, the value 3 is used.
+.IP
+The optional \fBl\fP specifies a longer format, including
+minutes, of the form \fIMM\fPm\fISS\fP.\fIFF\fPs.
+The value of \fIp\fP determines whether or not the fraction is
+included.
+.IP
+If this variable is not set, \fBbash\fP acts as if it had the
+value \fB$\(aq\enreal\et%3lR\enuser\et%3lU\ensys\et%3lS\(aq\fP.
+If the value is null, no timing information is displayed.
+A trailing newline is added when the format string is displayed.
+.PD 0
+.TP
+.B TMOUT
+If set to a value greater than zero,
+.SM
+.B TMOUT
+is treated as the
+default timeout for the \fBread\fP builtin.
+The \fBselect\fP command terminates if input does not arrive
+after
+.SM
+.B TMOUT
+seconds when input is coming from a terminal.
+In an interactive shell, the value is interpreted as the
+number of seconds to wait for a line of input after issuing the
+primary prompt.
+.B Bash
+terminates after waiting for that number of seconds if a complete
+line of input does not arrive.
+.TP
+.B TMPDIR
+If set, \fBbash\fP uses its value as the name of a directory in which
+\fBbash\fP creates temporary files for the shell's use.
+.TP
+.B auto_resume
+This variable controls how the shell interacts with the user and
+job control.  If this variable is set, single word simple
+commands without redirections are treated as candidates for resumption
+of an existing stopped job.  There is no ambiguity allowed; if there is
+more than one job beginning with the string typed, the job most recently
+accessed is selected.  The
+.I name
+of a stopped job, in this context, is the command line used to
+start it.
+If set to the value
+.IR exact ,
+the string supplied must match the name of a stopped job exactly;
+if set to
+.IR substring ,
+the string supplied needs to match a substring of the name of a
+stopped job.  The
+.I substring
+value provides functionality analogous to the
+.B %?
+job identifier (see
+.SM
+.B JOB CONTROL
+below).  If set to any other value, the supplied string must
+be a prefix of a stopped job's name; this provides functionality
+analogous to the \fB%\fP\fIstring\fP job identifier.
+.TP
+.B histchars
+The two or three characters which control history expansion
+and tokenization (see
+.SM
+.B HISTORY EXPANSION
+below).  The first character is the \fIhistory expansion\fP character,
+the character which signals the start of a history
+expansion, normally `\fB!\fP'.
+The second character is the \fIquick substitution\fP
+character, which is used as shorthand for re-running the previous
+command entered, substituting one string for another in the command.
+The default is `\fB^\fP'.
+The optional third character is the character
+which indicates that the remainder of the line is a comment when found
+as the first character of a word, normally `\fB#\fP'.  The history
+comment character causes history substitution to be skipped for the
+remaining words on the line.  It does not necessarily cause the shell
+parser to treat the rest of the line as a comment.
+.PD
+.SS Arrays
+.B Bash
+provides one-dimensional indexed and associative array variables.
+Any variable may be used as an indexed array; the
+.B declare
+builtin will explicitly declare an array.
+There is no maximum
+limit on the size of an array, nor any requirement that members
+be indexed or assigned contiguously.
+Indexed arrays are referenced using integers (including arithmetic
+expressions) and are zero-based; associative arrays are referenced
+using arbitrary strings.
+Unless otherwise noted, indexed array indices must be non-negative integers.
+.PP
+An indexed array is created automatically if any variable is assigned to
+using the syntax \fIname\fP[\fIsubscript\fP]=\fIvalue\fP.  The
+.I subscript
+is treated as an arithmetic expression that must evaluate to a number.
+To explicitly declare an indexed array, use
+.B declare \-a \fIname\fP
+(see
+.SM
+.B SHELL BUILTIN COMMANDS
+below).
+.B declare \-a \fIname\fP[\fIsubscript\fP]
+is also accepted; the \fIsubscript\fP is ignored.
+.PP
+Associative arrays are created using
+.BR "declare \-A \fIname\fP" .
+.PP
+Attributes may be
+specified for an array variable using the
+.B declare
+and
+.B readonly
+builtins.  Each attribute applies to all members of an array.
+.PP
+Arrays are assigned to using compound assignments of the form
+\fIname\fP=\fB(\fPvalue\fI1\fP ... value\fIn\fP\fB)\fP, where each
+\fIvalue\fP may be of the form [\fIsubscript\fP]=\fIstring\fP.
+Indexed array assignments do not require anything but \fIstring\fP.
+Each \fIvalue\fP in the list is expanded using all the shell expansions
+described below under
+.SM
+.BR EXPANSION .
+When assigning to indexed arrays, if the optional brackets and subscript
+are supplied, that index is assigned to;
+otherwise the index of the element assigned is the last index assigned
+to by the statement plus one.  Indexing starts at zero.
+.PP
+When assigning to an associative array, the words in a compound assignment
+may be either assignment statements, for which the subscript is required,
+or a list of words that is interpreted as a sequence of alternating keys
+and values:
+\fIname\fP=\fB( \fP\fIkey1 value1 key2 value2\fP ...\fB)\fP.
+These are treated identically to
+\fIname\fP=\fB(\fP [\fIkey1\fP]=\fIvalue1\fP [\fIkey2\fP]=\fIvalue2\fP ...\fB)\fP.
+The first word in the list determines how the remaining words
+are interpreted; all assignments in a list must be of the same type.
+When using key/value pairs, the keys may not be missing or empty;
+a final missing value is treated like the empty string.
+.PP
+This syntax is also accepted by the
+.B declare
+builtin.  Individual array elements may be assigned to using the
+\fIname\fP[\fIsubscript\fP]=\fIvalue\fP syntax introduced above.
+When assigning to an indexed array, if
+.I name
+is subscripted by a negative number, that number is
+interpreted as relative to one greater than the maximum index of
+\fIname\fP, so negative indices count back from the end of the
+array, and an index of \-1 references the last element.
+.PP
+Any element of an array may be referenced using
+${\fIname\fP[\fIsubscript\fP]}.  The braces are required to avoid
+conflicts with pathname expansion.  If
+\fIsubscript\fP is \fB@\fP or \fB*\fP, the word expands to
+all members of \fIname\fP.  These subscripts differ only when the
+word appears within double quotes.  If the word is double-quoted,
+${\fIname\fP[*]} expands to a single
+word with the value of each array member separated by the first
+character of the
+.SM
+.B IFS
+special variable, and ${\fIname\fP[@]} expands each element of
+\fIname\fP to a separate word.  When there are no array members,
+${\fIname\fP[@]} expands to nothing.
+If the double-quoted expansion occurs within a word, the expansion of
+the first parameter is joined with the beginning part of the original
+word, and the expansion of the last parameter is joined with the last
+part of the original word.
+This is analogous to the expansion
+of the special parameters \fB*\fP and \fB@\fP (see
+.B Special Parameters
+above).  ${#\fIname\fP[\fIsubscript\fP]} expands to the length of
+${\fIname\fP[\fIsubscript\fP]}.  If \fIsubscript\fP is \fB*\fP or
+\fB@\fP, the expansion is the number of elements in the array.
+If the
+.I subscript
+used to reference an element of an indexed array
+evaluates to a number less than zero, it is
+interpreted as relative to one greater than the maximum index of the array,
+so negative indices count back from the end of the
+array, and an index of \-1 references the last element.
+.PP
+Referencing an array variable without a subscript is equivalent to
+referencing the array with a subscript of 0.
+Any reference to a variable using a valid subscript is legal, and
+.B bash
+will create an array if necessary.
+.PP
+An array variable is considered set if a subscript has been assigned a
+value.  The null string is a valid value.
+.PP
+It is possible to obtain the keys (indices) of an array as well as the values.
+${\fB!\fP\fIname\fP[\fI@\fP]} and ${\fB!\fP\fIname\fP[\fI*\fP]}
+expand to the indices assigned in array variable \fIname\fP.
+The treatment when in double quotes is similar to the expansion of the
+special parameters \fI@\fP and \fI*\fP within double quotes.
+.PP
+The
+.B unset
+builtin is used to destroy arrays.  \fBunset\fP \fIname\fP[\fIsubscript\fP]
+destroys the array element at index \fIsubscript\fP,
+for both indexed and associative arrays.
+Negative subscripts to indexed arrays are interpreted as described above.
+Unsetting the last element of an array variable does not unset the variable.
+\fBunset\fP \fIname\fP, where \fIname\fP is an array, or
+\fBunset\fP \fIname\fP[\fIsubscript\fP], where
+\fIsubscript\fP is \fB*\fP or \fB@\fP, removes the entire array.
+.PP
+When using a variable name with a subscript as an argument to a command,
+such as with \fBunset\fP, without using the word expansion syntax
+described above, the argument is subject to pathname expansion.
+If pathname expansion is not desired, the argument should be quoted.
+.PP
+The
+.BR declare ,
+.BR local ,
+and
+.B readonly
+builtins each accept a
+.B \-a
+option to specify an indexed array and a
+.B \-A
+option to specify an associative array.
+If both options are supplied,
+.B \-A
+takes precedence.
+The
+.B read
+builtin accepts a
+.B \-a
+option to assign a list of words read from the standard input
+to an array.  The
+.B set
+and
+.B declare
+builtins display array values in a way that allows them to be
+reused as assignments.
+.SH EXPANSION
+Expansion is performed on the command line after it has been split into
+words.  There are seven kinds of expansion performed:
+.IR "brace expansion" ,
+.IR "tilde expansion" ,
+.IR "parameter and variable expansion" ,
+.IR "command substitution" ,
+.IR "arithmetic expansion" ,
+.IR "word splitting" ,
+and
+.IR "pathname expansion" .
+.PP
+The order of expansions is:
+brace expansion;
+tilde expansion, parameter and variable expansion, arithmetic expansion,
+and command substitution (done in a left-to-right fashion);
+word splitting;
+and pathname expansion.
+.PP
+On systems that can support it, there is an additional expansion
+available: \fIprocess substitution\fP.
+This is performed at the
+same time as tilde, parameter, variable, and arithmetic expansion and
+command substitution.
+.PP
+After these expansions are performed, quote characters present in the
+original word are removed unless they have been quoted themselves
+(\fIquote removal\fP).
+.PP
+Only brace expansion, word splitting, and pathname expansion
+can increase the number of words of the expansion; other expansions
+expand a single word to a single word.
+The only exceptions to this are the expansions of
+"\fB$@\fP" and "\fB${\fP\fIname\fP\fB[@]}\fP",
+and, in most cases, \fB$*\fP and \fB${\fP\fIname\fP\fB[*]}\fP
+as explained above (see
+.SM
+.BR PARAMETERS ).
+.SS Brace Expansion
+.I "Brace expansion"
+is a mechanism by which arbitrary strings
+may be generated.  This mechanism is similar to
+\fIpathname expansion\fP, but the filenames generated
+need not exist.  Patterns to be brace expanded take
+the form of an optional
+.IR preamble ,
+followed by either a series of comma-separated strings or
+a sequence expression between a pair of braces, followed by
+an optional
+.IR postscript .
+The preamble is prefixed to each string contained
+within the braces, and the postscript is then appended
+to each resulting string, expanding left to right.
+.PP
+Brace expansions may be nested.  The results of each expanded
+string are not sorted; left to right order is preserved.
+For example, a\fB{\fPd,c,b\fB}\fPe expands into `ade ace abe'.
+.PP
+A sequence expression takes the form
+\fB{\fP\fIx\fP\fB..\fP\fIy\fP\fB[..\fP\fIincr\fP\fB]}\fP,
+where \fIx\fP and \fIy\fP are either integers or single characters,
+and \fIincr\fP, an optional increment, is an integer.
+When integers are supplied, the expression expands to each number between
+\fIx\fP and \fIy\fP, inclusive.
+Supplied integers may be prefixed with \fI0\fP to force each term to have the
+same width.
+When either \fIx\fP or \fPy\fP begins with a zero, the shell
+attempts to force all generated terms to contain the same number of digits,
+zero-padding where necessary.
+When characters are supplied, the expression expands to each character
+lexicographically between \fIx\fP and \fIy\fP, inclusive,
+using the default C locale.
+Note that both \fIx\fP and \fIy\fP must be of the same type.
+When the increment is supplied, it is used as the difference between
+each term.  The default increment is 1 or \-1 as appropriate.
+.PP
+Brace expansion is performed before any other expansions,
+and any characters special to other expansions are preserved
+in the result.  It is strictly textual.
+.B Bash
+does not apply any syntactic interpretation to the context of the
+expansion or the text between the braces.
+.PP
+A correctly-formed brace expansion must contain unquoted opening
+and closing braces, and at least one unquoted comma or a valid
+sequence expression.
+Any incorrectly formed brace expansion is left unchanged.
+A \fB{\fP or \fB,\fP may be quoted with a backslash to prevent its
+being considered part of a brace expression.
+To avoid conflicts with parameter expansion, the string \fB${\fP
+is not considered eligible for brace expansion, and inhibits brace
+expansion until the closing \fB}\fP.
+.PP
+This construct is typically used as shorthand when the common
+prefix of the strings to be generated is longer than in the
+above example:
+.RS
+.PP
+mkdir /usr/local/src/bash/{old,new,dist,bugs}
+.RE
+or
+.RS
+chown root /usr/{ucb/{ex,edit},lib/{ex?.?*,how_ex}}
+.RE
+.PP
+Brace expansion introduces a slight incompatibility with
+historical versions of
+.BR sh .
+.B sh
+does not treat opening or closing braces specially when they
+appear as part of a word, and preserves them in the output.
+.B Bash
+removes braces from words as a consequence of brace
+expansion.  For example, a word entered to
+.B sh
+as \fIfile{1,2}\fP
+appears identically in the output.  The same word is
+output as
+.I file1 file2
+after expansion by
+.BR bash .
+If strict compatibility with
+.B sh
+is desired, start
+.B bash
+with the
+.B +B
+option or disable brace expansion with the
+.B +B
+option to the
+.B set
+command (see
+.SM
+.B SHELL BUILTIN COMMANDS
+below).
+.SS Tilde Expansion
+If a word begins with an unquoted tilde character (`\fB~\fP'), all of
+the characters preceding the first unquoted slash (or all characters,
+if there is no unquoted slash) are considered a \fItilde-prefix\fP.
+If none of the characters in the tilde-prefix are quoted, the
+characters in the tilde-prefix following the tilde are treated as a
+possible \fIlogin name\fP.
+If this login name is the null string, the tilde is replaced with the
+value of the shell parameter
+.SM
+.BR HOME .
+If
+.SM
+.B HOME
+is unset, the home directory of the user executing the shell is
+substituted instead.
+Otherwise, the tilde-prefix is replaced with the home directory
+associated with the specified login name.
+.PP
+If the tilde-prefix is a `~+', the value of the shell variable
+.SM
+.B PWD
+replaces the tilde-prefix.
+If the tilde-prefix is a `~\-', the value of the shell variable
+.SM
+.BR OLDPWD ,
+if it is set, is substituted.
+If the characters following the tilde in the tilde-prefix consist
+of a number \fIN\fP, optionally prefixed
+by a `+' or a `\-', the tilde-prefix is replaced with the corresponding
+element from the directory stack, as it would be displayed by the
+.B dirs
+builtin invoked with the tilde-prefix as an argument.
+If the characters following the tilde in the tilde-prefix consist of a
+number without a leading `+' or `\-', `+' is assumed.
+.PP
+If the login name is invalid, or the tilde expansion fails, the word
+is unchanged.
+.PP
+Each variable assignment is checked for unquoted tilde-prefixes immediately
+following a
+.B :
+or the first
+.BR = .
+In these cases, tilde expansion is also performed.
+Consequently, one may use filenames with tildes in assignments to
+.SM
+.BR PATH ,
+.SM
+.BR MAILPATH ,
+and
+.SM
+.BR CDPATH ,
+and the shell assigns the expanded value.
+.PP
+Bash also performs tilde expansion on words satisfying the conditions of
+variable assignments (as described above under
+.SM
+.BR PARAMETERS )
+when they appear as arguments to simple commands.
+Bash does not do this, except for the \fIdeclaration\fP commands listed
+above, when in \fIposix mode\fP.
+.SS Parameter Expansion
+The `\fB$\fP' character introduces parameter expansion,
+command substitution, or arithmetic expansion.  The parameter name
+or symbol to be expanded may be enclosed in braces, which
+are optional but serve to protect the variable to be expanded from
+characters immediately following it which could be
+interpreted as part of the name.
+.PP
+When braces are used, the matching ending brace is the first `\fB}\fP'
+not escaped by a backslash or within a quoted string, and not within an
+embedded arithmetic expansion, command substitution, or parameter
+expansion.
+.PP
+.PD 0
+.TP
+${\fIparameter\fP}
+The value of \fIparameter\fP is substituted.  The braces are required
+when
+.I parameter
+is a positional parameter with more than one digit,
+or when
+.I parameter
+is followed by a character which is not to be
+interpreted as part of its name.
+The \fIparameter\fP is a shell parameter as described above
+\fBPARAMETERS\fP) or an array reference (\fBArrays\fP).
+.PD
+.PP
+If the first character of \fIparameter\fP is an exclamation point (\fB!\fP),
+and \fIparameter\fP is not a \fInameref\fP,
+it introduces a level of indirection.
+\fBBash\fP uses the value formed by expanding the rest of
+\fIparameter\fP as the new \fIparameter\fP; this is then
+expanded and that value is used in the rest of the expansion, rather
+than the expansion of the original \fIparameter\fP.
+This is known as \fIindirect expansion\fP.
+The value is subject to tilde expansion,
+parameter expansion, command substitution, and arithmetic expansion.
+If \fIparameter\fP is a nameref, this expands to the name of the
+parameter referenced by \fIparameter\fP instead of performing the
+complete indirect expansion.
+The exceptions to this are the expansions of ${\fB!\fP\fIprefix\fP\fB*\fP} and
+${\fB!\fP\fIname\fP[\fI@\fP]} described below.
+The exclamation point must immediately follow the left brace in order to
+introduce indirection.
+.PP
+In each of the cases below, \fIword\fP is subject to tilde expansion,
+parameter expansion, command substitution, and arithmetic expansion.
+.PP
+When not performing substring expansion, using the forms documented below
+(e.g., \fB:-\fP),
+\fBbash\fP tests for a parameter that is unset or null.  Omitting the colon
+results in a test only for a parameter that is unset.
+.PP
+.PD 0
+.TP
+${\fIparameter\fP\fB:\-\fP\fIword\fP}
+\fBUse Default Values\fP.  If
+.I parameter
+is unset or null, the expansion of
+.I word
+is substituted.  Otherwise, the value of
+.I parameter
+is substituted.
+.TP
+${\fIparameter\fP\fB:=\fP\fIword\fP}
+\fBAssign Default Values\fP.
+If
+.I parameter
+is unset or null, the expansion of
+.I word
+is assigned to
+.IR parameter .
+The value of
+.I parameter
+is then substituted.  Positional parameters and special parameters may
+not be assigned to in this way.
+.TP
+${\fIparameter\fP\fB:?\fP\fIword\fP}
+\fBDisplay Error if Null or Unset\fP.
+If
+.I parameter
+is null or unset, the expansion of \fIword\fP (or a message to that effect
+if
+.I word
+is not present) is written to the standard error and the shell, if it
+is not interactive, exits.  Otherwise, the value of \fIparameter\fP is
+substituted.
+.TP
+${\fIparameter\fP\fB:+\fP\fIword\fP}
+\fBUse Alternate Value\fP.
+If
+.I parameter
+is null or unset, nothing is substituted, otherwise the expansion of
+.I word
+is substituted.
+.TP
+${\fIparameter\fP\fB:\fP\fIoffset\fP}
+.PD 0
+.TP
+${\fIparameter\fP\fB:\fP\fIoffset\fP\fB:\fP\fIlength\fP}
+.PD
+\fBSubstring Expansion\fP.
+Expands to up to \fIlength\fP characters of the value of \fIparameter\fP
+starting at the character specified by \fIoffset\fP.
+If \fIparameter\fP is \fB@\fP, an indexed array subscripted by
+\fB@\fP or \fB*\fP, or an associative array name, the results differ as
+described below.
+If \fIlength\fP is omitted, expands to the substring of the value of
+\fIparameter\fP starting at the character specified by \fIoffset\fP
+and extending to the end of the value.
+\fIlength\fP and \fIoffset\fP are arithmetic expressions (see
+.SM
+.B
+ARITHMETIC EVALUATION
+below).
+.sp 1
+If \fIoffset\fP evaluates to a number less than zero, the value
+is used as an offset in characters
+from the end of the value of \fIparameter\fP.
+If \fIlength\fP evaluates to a number less than zero,
+it is interpreted as an offset in characters
+from the end of the value of \fIparameter\fP rather than
+a number of characters, and the expansion is the characters between
+\fIoffset\fP and that result.
+Note that a negative offset must be separated from the colon by at least
+one space to avoid being confused with the \fB:-\fP expansion.
+.sp 1
+If \fIparameter\fP is \fB@\fP, the result is \fIlength\fP positional
+parameters beginning at \fIoffset\fP.
+A negative \fIoffset\fP is taken relative to one greater than the greatest
+positional parameter, so an offset of \-1 evaluates to the last positional
+parameter.
+It is an expansion error if \fIlength\fP evaluates to a number less than
+zero.
+.sp 1
+If \fIparameter\fP is an indexed array name subscripted by @ or *,
+the result is the \fIlength\fP
+members of the array beginning with ${\fIparameter\fP[\fIoffset\fP]}.
+A negative \fIoffset\fP is taken relative to one greater than the maximum
+index of the specified array.
+It is an expansion error if \fIlength\fP evaluates to a number less than
+zero.
+.sp 1
+Substring expansion applied to an associative array produces undefined
+results.
+.sp 1
+Substring indexing is zero-based unless the positional parameters
+are used, in which case the indexing starts at 1 by default.
+If \fIoffset\fP is 0, and the positional parameters are used, \fB$0\fP is
+prefixed to the list.
+.TP
+${\fB!\fP\fIprefix\fP\fB*\fP}
+.PD 0
+.TP
+${\fB!\fP\fIprefix\fP\fB@\fP}
+.PD
+\fBNames matching prefix\fP.
+Expands to the names of variables whose names begin with \fIprefix\fP,
+separated by the first character of the
+.SM
+.B IFS
+special variable.
+When \fI@\fP is used and the expansion appears within double quotes, each
+variable name expands to a separate word.
+.TP
+${\fB!\fP\fIname\fP[\fI@\fP]}
+.PD 0
+.TP
+${\fB!\fP\fIname\fP[\fI*\fP]}
+.PD
+\fBList of array keys\fP.
+If \fIname\fP is an array variable, expands to the list of array indices
+(keys) assigned in \fIname\fP.
+If \fIname\fP is not an array, expands to 0 if \fIname\fP is set and null
+otherwise.
+When \fI@\fP is used and the expansion appears within double quotes, each
+key expands to a separate word.
+.TP
+${\fB#\fP\fIparameter\fP}
+\fBParameter length\fP.
+The length in characters of the value of \fIparameter\fP is substituted.
+If
+.I parameter
+is
+.B *
+or
+.BR @ ,
+the value substituted is the number of positional parameters.
+If
+.I parameter
+is an array name subscripted by
+.B *
+or
+.BR @ ,
+the value substituted is the number of elements in the array.
+If
+.I parameter
+is an indexed array name subscripted by a negative number, that number is
+interpreted as relative to one greater than the maximum index of
+\fIparameter\fP, so negative indices count back from the end of the
+array, and an index of \-1 references the last element.
+.TP
+${\fIparameter\fP\fB#\fP\fIword\fP}
+.PD 0
+.TP
+${\fIparameter\fP\fB##\fP\fIword\fP}
+.PD
+\fBRemove matching prefix pattern\fP.
+The
+.I word
+is expanded to produce a pattern just as in pathname
+expansion, and matched against the expanded value of
+.I parameter
+using the rules described under
+.B Pattern Matching
+below.
+If the pattern matches the beginning of
+the value of
+.IR parameter ,
+then the result of the expansion is the expanded value of
+.I parameter
+with the shortest matching pattern (the ``\fB#\fP'' case) or the
+longest matching pattern (the ``\fB##\fP'' case) deleted.
+If
+.I parameter
+is
+.B @
+or
+.BR * ,
+the pattern removal operation is applied to each positional
+parameter in turn, and the expansion is the resultant list.
+If
+.I parameter
+is an array variable subscripted with
+.B @
+or
+.BR * ,
+the pattern removal operation is applied to each member of the
+array in turn, and the expansion is the resultant list.
+.TP
+${\fIparameter\fP\fB%\fP\fIword\fP}
+.PD 0
+.TP
+${\fIparameter\fP\fB%%\fP\fIword\fP}
+.PD
+\fBRemove matching suffix pattern\fP.
+The \fIword\fP is expanded to produce a pattern just as in
+pathname expansion, and matched against the expanded value of
+.I parameter
+using the rules described under
+.B Pattern Matching
+below.
+If the pattern matches a trailing portion of the expanded value of
+.IR parameter ,
+then the result of the expansion is the expanded value of
+.I parameter
+with the shortest matching pattern (the ``\fB%\fP'' case) or the
+longest matching pattern (the ``\fB%%\fP'' case) deleted.
+If
+.I parameter
+is
+.B @
+or
+.BR * ,
+the pattern removal operation is applied to each positional
+parameter in turn, and the expansion is the resultant list.
+If
+.I parameter
+is an array variable subscripted with
+.B @
+or
+.BR * ,
+the pattern removal operation is applied to each member of the
+array in turn, and the expansion is the resultant list.
+.TP
+${\fIparameter\fP\fB/\fP\fIpattern\fP\fB/\fP\fIstring\fP}
+\fBPattern substitution\fP.
+The \fIpattern\fP is expanded to produce a pattern just as in
+pathname expansion,
+\fIParameter\fP is expanded and the longest match of \fIpattern\fP
+against its value is replaced with \fIstring\fP.
+The match is performed using the rules described under
+.B Pattern Matching
+below.
+If \fIpattern\fP begins with \fB/\fP, all matches of \fIpattern\fP are
+replaced with \fIstring\fP.  Normally only the first match is replaced.
+If \fIpattern\fP begins with \fB#\fP, it must match at the beginning
+of the expanded value of \fIparameter\fP.
+If \fIpattern\fP begins with \fB%\fP, it must match at the end
+of the expanded value of \fIparameter\fP.
+If \fIstring\fP is null, matches of \fIpattern\fP are deleted
+and the \fB/\fP following \fIpattern\fP may be omitted.
+If the
+.B nocasematch
+shell option is enabled, the match is performed without regard to the case
+of alphabetic characters.
+If
+.I parameter
+is
+.B @
+or
+.BR * ,
+the substitution operation is applied to each positional
+parameter in turn, and the expansion is the resultant list.
+If
+.I parameter
+is an array variable subscripted with
+.B @
+or
+.BR * ,
+the substitution operation is applied to each member of the
+array in turn, and the expansion is the resultant list.
+.TP
+${\fIparameter\fP\fB^\fP\fIpattern\fP}
+.PD 0
+.TP
+${\fIparameter\fP\fB^^\fP\fIpattern\fP}
+.TP
+${\fIparameter\fP\fB,\fP\fIpattern\fP}
+.TP
+${\fIparameter\fP\fB,,\fP\fIpattern\fP}
+.PD
+\fBCase modification\fP.
+This expansion modifies the case of alphabetic characters in \fIparameter\fP.
+The \fIpattern\fP is expanded to produce a pattern just as in
+pathname expansion.
+Each character in the expanded value of \fIparameter\fP is tested against
+\fIpattern\fP, and, if it matches the pattern, its case is converted.
+The pattern should not attempt to match more than one character.
+The \fB^\fP operator converts lowercase letters matching \fIpattern\fP
+to uppercase; the \fB,\fP operator converts matching uppercase letters
+to lowercase.
+The \fB^^\fP and \fB,,\fP expansions convert each matched character in the
+expanded value; the \fB^\fP and \fB,\fP expansions match and convert only
+the first character in the expanded value.
+If \fIpattern\fP is omitted, it is treated like a \fB?\fP, which matches
+every character.
+If
+.I parameter
+is
+.B @
+or
+.BR * ,
+the case modification operation is applied to each positional
+parameter in turn, and the expansion is the resultant list.
+If
+.I parameter
+is an array variable subscripted with
+.B @
+or
+.BR * ,
+the case modification operation is applied to each member of the
+array in turn, and the expansion is the resultant list.
+.TP
+${\fIparameter\fP\fB@\fP\fIoperator\fP}
+\fBParameter transformation\fP.
+The expansion is either a transformation of the value of \fIparameter\fP
+or information about \fIparameter\fP itself, depending on the value of
+\fIoperator\fP.  Each \fIoperator\fP is a single letter:
+.sp 1
+.RS
+.PD 0
+.TP
+.B U
+The expansion is a string that is the value of \fIparameter\fP with lowercase
+alphabetic characters converted to uppercase.
+.TP
+.B u
+The expansion is a string that is the value of \fIparameter\fP with the first
+character converted to uppercase, if it is alphabetic.
+.TP
+.B L
+The expansion is a string that is the value of \fIparameter\fP with uppercase
+alphabetic characters converted to lowercase.
+.TP
+.B Q
+The expansion is a string that is the value of \fIparameter\fP quoted in a
+format that can be reused as input.
+.TP
+.B E
+The expansion is a string that is the value of \fIparameter\fP with backslash
+escape sequences expanded as with the \fB$'...'\fP quoting mechanism.
+.TP
+.B P
+The expansion is a string that is the result of expanding the value of
+\fIparameter\fP as if it were a prompt string (see \fBPROMPTING\fP below).
+.TP
+.B A
+The expansion is a string in the form of
+an assignment statement or \fBdeclare\fP command that, if
+evaluated, will recreate \fIparameter\fP with its attributes and value.
+.TP
+.B K
+Produces a possibly-quoted version of the value of \fIparameter\fP,
+except that it prints the values of
+indexed and associative arrays as a sequence of quoted key-value pairs
+(see \fBArrays\fP above).
+.TP
+.B a
+The expansion is a string consisting of flag values representing
+\fIparameter\fP's attributes.
+.PD
+.PP
+If
+.I parameter
+is
+.B @
+or
+.BR * ,
+the operation is applied to each positional
+parameter in turn, and the expansion is the resultant list.
+If
+.I parameter
+is an array variable subscripted with
+.B @
+or
+.BR * ,
+the operation is applied to each member of the
+array in turn, and the expansion is the resultant list.
+.sp 1
+The result of the expansion is subject to word splitting and pathname
+expansion as described below.
+.RE
+.SS Command Substitution
+\fICommand substitution\fP allows the output of a command to replace
+the command name.  There are two forms:
+.RS
+.PP
+\fB$(\fP\fIcommand\fP\|\fB)\fP
+.RE
+or
+.RS
+\fB\`\fP\fIcommand\fP\fB\`\fP
+.RE
+.PP
+.B Bash
+performs the expansion by executing \fIcommand\fP in a subshell environment
+and replacing the command substitution with the standard output of the
+command, with any trailing newlines deleted.
+Embedded newlines are not deleted, but they may be removed during
+word splitting.
+The command substitution \fB$(cat \fIfile\fP)\fR can be replaced by
+the equivalent but faster \fB$(< \fIfile\fP)\fR.
+.PP
+When the old-style backquote form of substitution is used,
+backslash retains its literal meaning except when followed by
+.BR $ ,
+.BR \` ,
+or
+.BR \e .
+The first backquote not preceded by a backslash terminates the
+command substitution.
+When using the $(\^\fIcommand\fP\|) form, all characters between the
+parentheses make up the command; none are treated specially.
+.PP
+Command substitutions may be nested.  To nest when using the backquoted form,
+escape the inner backquotes with backslashes.
+.PP
+If the substitution appears within double quotes, word splitting and
+pathname expansion are not performed on the results.
+.SS Arithmetic Expansion
+Arithmetic expansion allows the evaluation of an arithmetic expression
+and the substitution of the result.  The format for arithmetic expansion is:
+.RS
+.PP
+\fB$((\fP\fIexpression\fP\fB))\fP
+.RE
+.PP
+The
+.I expression
+is treated as if it were within double quotes, but a double quote
+inside the parentheses is not treated specially.
+All tokens in the expression undergo parameter and variable expansion,
+command substitution, and quote removal.
+The result is treated as the arithmetic expression to be evaluated.
+Arithmetic expansions may be nested.
+.PP
+The evaluation is performed according to the rules listed below under
+.SM
+.BR "ARITHMETIC EVALUATION" .
+If
+.I expression
+is invalid,
+.B bash
+prints a message indicating failure and no substitution occurs.
+.SS Process Substitution
+\fIProcess substitution\fP allows a process's input or output to be
+referred to using a filename.
+It takes the form of
+\fB<(\fP\fIlist\^\fP\fB)\fP
+or
+\fB>(\fP\fIlist\^\fP\fB)\fP.
+The process \fIlist\fP is run asynchronously, and its input or output
+appears as a filename.
+This filename is
+passed as an argument to the current command as the result of the
+expansion.
+If the \fB>(\fP\fIlist\^\fP\fB)\fP form is used, writing to
+the file will provide input for \fIlist\fP.  If the
+\fB<(\fP\fIlist\^\fP\fB)\fP form is used, the file passed as an
+argument should be read to obtain the output of \fIlist\fP.
+Process substitution is supported on systems that support named
+pipes (\fIFIFOs\fP) or the \fB/dev/fd\fP method of naming open files.
+.PP
+When available, process substitution is performed
+simultaneously with parameter and variable expansion,
+command substitution,
+and arithmetic expansion.
+.SS Word Splitting
+The shell scans the results of
+parameter expansion,
+command substitution,
+and
+arithmetic expansion
+that did not occur within double quotes for
+.IR "word splitting" .
+.PP
+The shell treats each character of
+.SM
+.B IFS
+as a delimiter, and splits the results of the other
+expansions into words using these characters as field terminators.
+If
+.SM
+.B IFS
+is unset, or its
+value is exactly
+.BR <space><tab><newline> ,
+the default, then
+sequences of
+.BR <space> ,
+.BR <tab> ,
+and
+.B <newline>
+at the beginning and end of the results of the previous
+expansions are ignored, and
+any sequence of
+.SM
+.B IFS
+characters not at the beginning or end serves to delimit words.
+If
+.SM
+.B IFS
+has a value other than the default, then sequences of
+the whitespace characters
+.BR space ,
+.BR tab ,
+and
+.B newline
+are ignored at the beginning and end of the
+word, as long as the whitespace character is in the
+value of
+.SM
+.B IFS
+(an
+.SM
+.B IFS
+whitespace character).
+Any character in
+.SM
+.B IFS
+that is not
+.SM
+.B IFS
+whitespace, along with any adjacent
+.SM
+.B IFS
+whitespace characters, delimits a field.
+A sequence of
+.SM
+.B IFS
+whitespace characters is also treated as a delimiter.
+If the value of
+.SM
+.B IFS
+is null, no word splitting occurs.
+.PP
+Explicit null arguments (\^\f3"\^"\fP or \^\f3\(aq\^\(aq\fP\^) are retained
+and passed to commands as empty strings.
+Unquoted implicit null arguments, resulting from the expansion of
+parameters that have no values, are removed.
+If a parameter with no value is expanded within double quotes, a
+null argument results and is retained
+and passed to a command as an empty string.
+When a quoted null argument appears as part of a word whose expansion is
+non-null, the null argument is removed.
+That is, the word
+\f(CW\-d\(aq\^\(aq\fP becomes \f(CW\-d\fP after word splitting and
+null argument removal.
+.PP
+Note that if no expansion occurs, no splitting
+is performed.
+.SS Pathname Expansion
+After word splitting,
+unless the
+.B \-f
+option has been set,
+.B bash
+scans each word for the characters
+.BR * ,
+.BR ? ,
+and
+.BR [ .
+If one of these characters appears, and is not quoted, then the word is
+regarded as a
+.IR pattern ,
+and replaced with an alphabetically sorted list of
+filenames matching the pattern
+(see
+.SM
+.B "Pattern Matching"
+below).
+If no matching filenames are found,
+and the shell option
+.B nullglob
+is not enabled, the word is left unchanged.
+If the
+.B nullglob
+option is set, and no matches are found,
+the word is removed.
+If the
+.B failglob
+shell option is set, and no matches are found, an error message
+is printed and the command is not executed.
+If the shell option
+.B nocaseglob
+is enabled, the match is performed without regard to the case
+of alphabetic characters.
+When a pattern is used for pathname expansion,
+the character
+.B ``.''
+at the start of a name or immediately following a slash
+must be matched explicitly, unless the shell option
+.B dotglob
+is set.
+The filenames
+.B ``.''
+and
+.B ``..''
+must always be matched explicitly, even if
+.B dotglob
+is set.
+In other cases, the
+.B ``.''
+character is not treated specially.
+When matching a pathname, the slash character must always be
+matched explicitly by a slash in the pattern, but in other matching
+contexts it can be matched by a special pattern character as described
+below under
+.SM
+.BR "Pattern Matching" .
+See the description of
+.B shopt
+below under
+.SM
+.B SHELL BUILTIN COMMANDS
+for a description of the
+.BR nocaseglob ,
+.BR nullglob ,
+.BR failglob ,
+and
+.B dotglob
+shell options.
+.PP
+The
+.SM
+.B GLOBIGNORE
+shell variable may be used to restrict the set of file names matching a
+.IR pattern .
+If
+.SM
+.B GLOBIGNORE
+is set, each matching file name that also matches one of the patterns in
+.SM
+.B GLOBIGNORE
+is removed from the list of matches.
+If the \fBnocaseglob\fP option is set, the matching against the patterns in
+.SM
+.B GLOBIGNORE
+is performed without regard to case.
+The filenames
+.B ``.''
+and
+.B ``..''
+are always ignored when
+.SM
+.B GLOBIGNORE
+is set and not null.  However, setting
+.SM
+.B GLOBIGNORE
+to a non-null value has the effect of enabling the
+.B dotglob
+shell option, so all other filenames beginning with a
+.B ``.''
+will match.
+To get the old behavior of ignoring filenames beginning with a
+.BR ``.'' ,
+make
+.B ``.*''
+one of the patterns in
+.SM
+.BR GLOBIGNORE .
+The
+.B dotglob
+option is disabled when
+.SM
+.B GLOBIGNORE
+is unset.
+The pattern matching honors the setting of the \fBextglob\fP shell
+option.
+.PP
+\fBPattern Matching\fP
+.PP
+Any character that appears in a pattern, other than the special pattern
+characters described below, matches itself.  The NUL character may not
+occur in a pattern.  A backslash escapes the following character; the
+escaping backslash is discarded when matching.
+The special pattern characters must be quoted if
+they are to be matched literally.
+.PP
+The special pattern characters have the following meanings:
+.PP
+.PD 0
+.RS
+.TP
+.B *
+Matches any string, including the null string.
+When the \fBglobstar\fP shell option is enabled, and \fB*\fP is used in
+a pathname expansion context, two adjacent \fB*\fPs used as a single
+pattern will match all files and zero or more directories and
+subdirectories.
+If followed by a \fB/\fP, two adjacent \fB*\fPs will match only directories
+and subdirectories.
+.TP
+.B ?
+Matches any single character.
+.TP
+.B [...]
+Matches any one of the enclosed characters.  A pair of characters
+separated by a hyphen denotes a
+\fIrange expression\fP;
+any character that falls between those two characters, inclusive,
+using the current locale's collating sequence and character set,
+is matched.  If the first character following the
+.B [
+is a
+.B !
+or a
+.B ^
+then any character not enclosed is matched.
+The sorting order of characters in range expressions is determined by
+the current locale and the values of the
+.SM
+.B LC_COLLATE
+or
+.SM
+.B LC_ALL
+shell variables, if set.
+To obtain the traditional interpretation of range expressions, where
+.B [a\-d]
+is equivalent to
+.BR [abcd] ,
+set value of the
+.B LC_ALL
+shell variable to
+.BR C ,
+or enable the
+.B globasciiranges
+shell option.
+A
+.B \-
+may be matched by including it as the first or last character
+in the set.
+A
+.B ]
+may be matched by including it as the first character
+in the set.
+.br
+.if t .sp 0.5
+.if n .sp 1
+Within
+.B [
+and
+.BR ] ,
+\fIcharacter classes\fP can be specified using the syntax
+\fB[:\fP\fIclass\fP\fB:]\fP, where \fIclass\fP is one of the
+following classes defined in the POSIX standard:
+.PP
+.RS
+.B
+.if n alnum alpha ascii blank cntrl digit graph lower print punct space upper word xdigit
+.if t alnum   alpha   ascii   blank   cntrl   digit   graph   lower   print   punct   space   upper   word   xdigit
+.br
+A character class matches any character belonging to that class.
+The \fBword\fP character class matches letters, digits, and the character _.
+.br
+.if t .sp 0.5
+.if n .sp 1
+Within
+.B [
+and
+.BR ] ,
+an \fIequivalence class\fP can be specified using the syntax
+\fB[=\fP\fIc\fP\fB=]\fP, which matches all characters with the
+same collation weight (as defined by the current locale) as
+the character \fIc\fP.
+.br
+.if t .sp 0.5
+.if n .sp 1
+Within
+.B [
+and
+.BR ] ,
+the syntax \fB[.\fP\fIsymbol\fP\fB.]\fP matches the collating symbol
+\fIsymbol\fP.
+.RE
+.RE
+.PD
+.PP
+If the \fBextglob\fP shell option is enabled using the \fBshopt\fP
+builtin, several extended pattern matching operators are recognized.
+In the following description, a \fIpattern-list\fP is a list of one
+or more patterns separated by a \fB|\fP.
+Composite patterns may be formed using one or more of the following
+sub-patterns:
+.sp 1
+.PD 0
+.RS
+.TP
+\fB?(\fP\^\fIpattern-list\^\fP\fB)\fP
+Matches zero or one occurrence of the given patterns
+.TP
+\fB*(\fP\^\fIpattern-list\^\fP\fB)\fP
+Matches zero or more occurrences of the given patterns
+.TP
+\fB+(\fP\^\fIpattern-list\^\fP\fB)\fP
+Matches one or more occurrences of the given patterns
+.TP
+\fB@(\fP\^\fIpattern-list\^\fP\fB)\fP
+Matches one of the given patterns
+.TP
+\fB!(\fP\^\fIpattern-list\^\fP\fB)\fP
+Matches anything except one of the given patterns
+.RE
+.PD
+.PP
+Complicated extended pattern matching against long strings is slow,
+especially when the patterns contain alternations and the strings
+contain multiple matches.
+Using separate matches against shorter strings, or using arrays of
+strings instead of a single long string, may be faster.
+.SS Quote Removal
+After the preceding expansions, all unquoted occurrences of the
+characters
+.BR \e ,
+.BR \(aq ,
+and \^\f3"\fP\^ that did not result from one of the above
+expansions are removed.
+.SH REDIRECTION
+Before a command is executed, its input and output
+may be
+.I redirected
+using a special notation interpreted by the shell.
+Redirection allows commands' file handles to be
+duplicated, opened, closed,
+made to refer to different files,
+and can change the files the command reads from and writes to.
+Redirection may also be used to modify file handles in the
+current shell execution environment.
+The following redirection
+operators may precede or appear anywhere within a
+.I simple command
+or may follow a
+.IR command .
+Redirections are processed in the order they appear, from
+left to right.
+.PP
+Each redirection that may be preceded by a file descriptor number
+may instead be preceded by a word of the form {\fIvarname\fP}.
+In this case, for each redirection operator except
+>&- and <&-, the shell will allocate a file descriptor greater
+than or equal to 10 and assign it to \fIvarname\fP.
+If >&- or <&- is preceded
+by {\fIvarname\fP}, the value of \fIvarname\fP defines the file
+descriptor to close.
+If {\fIvarname\fP} is supplied, the redirection persists beyond
+the scope of the command, allowing the shell programmer to manage
+the file descriptor himself.
+.PP
+In the following descriptions, if the file descriptor number is
+omitted, and the first character of the redirection operator is
+.BR < ,
+the redirection refers to the standard input (file descriptor
+0).  If the first character of the redirection operator is
+.BR > ,
+the redirection refers to the standard output (file descriptor
+1).
+.PP
+The word following the redirection operator in the following
+descriptions, unless otherwise noted, is subjected to
+brace expansion, tilde expansion, parameter and variable expansion,
+command substitution, arithmetic expansion, quote removal,
+pathname expansion, and word splitting.
+If it expands to more than one word,
+.B bash
+reports an error.
+.PP
+Note that the order of redirections is significant.  For example,
+the command
+.RS
+.PP
+ls \fB>\fP dirlist 2\fB>&\fP1
+.RE
+.PP
+directs both standard output and standard error to the file
+.IR dirlist ,
+while the command
+.RS
+.PP
+ls 2\fB>&\fP1 \fB>\fP dirlist
+.RE
+.PP
+directs only the standard output to file
+.IR dirlist ,
+because the standard error was duplicated from the standard output
+before the standard output was redirected to
+.IR dirlist .
+.PP
+\fBBash\fP handles several filenames specially when they are used in
+redirections, as described in the following table.
+If the operating system on which \fBbash\fP is running provides these
+special files, bash will use them; otherwise it will emulate them
+internally with the behavior described below.
+.RS
+.PP
+.PD 0
+.TP
+.B /dev/fd/\fIfd\fP
+If \fIfd\fP is a valid integer, file descriptor \fIfd\fP is duplicated.
+.TP
+.B /dev/stdin
+File descriptor 0 is duplicated.
+.TP
+.B /dev/stdout
+File descriptor 1 is duplicated.
+.TP
+.B /dev/stderr
+File descriptor 2 is duplicated.
+.TP
+.B /dev/tcp/\fIhost\fP/\fIport\fP
+If \fIhost\fP is a valid hostname or Internet address, and \fIport\fP
+is an integer port number or service name, \fBbash\fP attempts to open
+the corresponding TCP socket.
+.TP
+.B /dev/udp/\fIhost\fP/\fIport\fP
+If \fIhost\fP is a valid hostname or Internet address, and \fIport\fP
+is an integer port number or service name, \fBbash\fP attempts to open
+the corresponding UDP socket.
+.PD
+.RE
+.PP
+A failure to open or create a file causes the redirection to fail.
+.PP
+Redirections using file descriptors greater than 9 should be used with
+care, as they may conflict with file descriptors the shell uses
+internally.
+.SS Redirecting Input
+Redirection of input causes the file whose name results from
+the expansion of
+.I word
+to be opened for reading on file descriptor
+.IR n ,
+or the standard input (file descriptor 0) if
+.I n
+is not specified.
+.PP
+The general format for redirecting input is:
+.RS
+.PP
+[\fIn\fP]\fB<\fP\fIword\fP
+.RE
+.SS Redirecting Output
+Redirection of output causes the file whose name results from
+the expansion of
+.I word
+to be opened for writing on file descriptor
+.IR n ,
+or the standard output (file descriptor 1) if
+.I n
+is not specified.  If the file does not exist it is created;
+if it does exist it is truncated to zero size.
+.PP
+The general format for redirecting output is:
+.RS
+.PP
+[\fIn\fP]\fB>\fP\fIword\fP
+.RE
+.PP
+If the redirection operator is
+.BR > ,
+and the
+.B noclobber
+option to the
+.B set
+builtin has been enabled, the redirection will fail if the file
+whose name results from the expansion of \fIword\fP exists and is
+a regular file.
+If the redirection operator is
+.BR >| ,
+or the redirection operator is
+.B >
+and the
+.B noclobber
+option to the
+.B set
+builtin command is not enabled, the redirection is attempted even
+if the file named by \fIword\fP exists.
+.SS Appending Redirected Output
+Redirection of output in this fashion
+causes the file whose name results from
+the expansion of
+.I word
+to be opened for appending on file descriptor
+.IR n ,
+or the standard output (file descriptor 1) if
+.I n
+is not specified.  If the file does not exist it is created.
+.PP
+The general format for appending output is:
+.RS
+.PP
+[\fIn\fP]\fB>>\fP\fIword\fP
+.RE
+.SS Redirecting Standard Output and Standard Error
+This construct allows both the
+standard output (file descriptor 1) and
+the standard error output (file descriptor 2)
+to be redirected to the file whose name is the
+expansion of
+.IR word .
+.PP
+There are two formats for redirecting standard output and
+standard error:
+.RS
+.PP
+\fB&>\fP\fIword\fP
+.RE
+and
+.RS
+\fB>&\fP\fIword\fP
+.RE
+.PP
+Of the two forms, the first is preferred.
+This is semantically equivalent to
+.RS
+.PP
+\fB>\fP\fIword\fP 2\fB>&\fP1
+.RE
+.PP
+When using the second form, \fIword\fP may not expand to a number or
+\fB\-\fP.  If it does, other redirection operators apply
+(see \fBDuplicating File Descriptors\fP below) for compatibility
+reasons.
+.SS Appending Standard Output and Standard Error
+This construct allows both the
+standard output (file descriptor 1) and
+the standard error output (file descriptor 2)
+to be appended to the file whose name is the
+expansion of
+.IR word .
+.PP
+The format for appending standard output and standard error is:
+.RS
+.PP
+\fB&>>\fP\fIword\fP
+.RE
+.PP
+This is semantically equivalent to
+.RS
+.PP
+\fB>>\fP\fIword\fP 2\fB>&\fP1
+.RE
+.PP
+(see \fBDuplicating File Descriptors\fP below).
+.SS Here Documents
+This type of redirection instructs the shell to read input from the
+current source until a line containing only
+.I delimiter
+(with no trailing blanks)
+is seen.  All of
+the lines read up to that point are then used as the standard
+input (or file descriptor \fIn\fP if \fIn\fP is specified) for a command.
+.PP
+The format of here-documents is:
+.RS
+.PP
+.nf
+[\fIn\fP]\fB<<\fP[\fB\-\fP]\fIword\fP
+        \fIhere-document\fP
+\fIdelimiter\fP
+.fi
+.RE
+.PP
+No parameter and variable expansion, command substitution,
+arithmetic expansion, or pathname expansion is performed on
+.IR word .
+If any part of
+.I word
+is quoted, the
+.I delimiter
+is the result of quote removal on
+.IR word ,
+and the lines in the here-document are not expanded.
+If \fIword\fP is unquoted,
+all lines of the here-document are subjected to
+parameter expansion, command substitution, and arithmetic expansion,
+the character sequence
+.B \e<newline>
+is ignored, and
+.B \e
+must be used to quote the characters
+.BR \e ,
+.BR $ ,
+and
+.BR \` .
+.PP
+If the redirection operator is
+.BR <<\- ,
+then all leading tab characters are stripped from input lines and the
+line containing
+.IR delimiter .
+This allows
+here-documents within shell scripts to be indented in a
+natural fashion.
+.SS "Here Strings"
+A variant of here documents, the format is:
+.RS
+.PP
+.nf
+[\fIn\fP]\fB<<<\fP\fIword\fP
+.fi
+.RE
+.PP
+The \fIword\fP undergoes
+tilde expansion, parameter and variable expansion,
+command substitution, arithmetic expansion, and quote removal.
+Pathname expansion and word splitting are not performed.
+The result is supplied as a single string, with a newline appended,
+to the command on its
+standard input (or file descriptor \fIn\fP if \fIn\fP is specified).
+.SS "Duplicating File Descriptors"
+The redirection operator
+.RS
+.PP
+[\fIn\fP]\fB<&\fP\fIword\fP
+.RE
+.PP
+is used to duplicate input file descriptors.
+If
+.I word
+expands to one or more digits, the file descriptor denoted by
+.I n
+is made to be a copy of that file descriptor.
+If the digits in
+.I word
+do not specify a file descriptor open for input, a redirection error occurs.
+If
+.I word
+evaluates to
+.BR \- ,
+file descriptor
+.I n
+is closed.  If
+.I n
+is not specified, the standard input (file descriptor 0) is used.
+.PP
+The operator
+.RS
+.PP
+[\fIn\fP]\fB>&\fP\fIword\fP
+.RE
+.PP
+is used similarly to duplicate output file descriptors.  If
+.I n
+is not specified, the standard output (file descriptor 1) is used.
+If the digits in
+.I word
+do not specify a file descriptor open for output, a redirection error occurs.
+If
+.I word
+evaluates to
+.BR \- ,
+file descriptor
+.I n
+is closed.
+As a special case, if \fIn\fP is omitted, and \fIword\fP does not
+expand to one or more digits or \fB\-\fP, the standard output and standard
+error are redirected as described previously.
+.SS "Moving File Descriptors"
+The redirection operator
+.RS
+.PP
+[\fIn\fP]\fB<&\fP\fIdigit\fP\fB\-\fP
+.RE
+.PP
+moves the file descriptor \fIdigit\fP to file descriptor
+.IR n ,
+or the standard input (file descriptor 0) if \fIn\fP is not specified.
+\fIdigit\fP is closed after being duplicated to \fIn\fP.
+.PP
+Similarly, the redirection operator
+.RS
+.PP
+[\fIn\fP]\fB>&\fP\fIdigit\fP\fB\-\fP
+.RE
+.PP
+moves the file descriptor \fIdigit\fP to file descriptor
+.IR n ,
+or the standard output (file descriptor 1) if \fIn\fP is not specified.
+.SS "Opening File Descriptors for Reading and Writing"
+The redirection operator
+.RS
+.PP
+[\fIn\fP]\fB<>\fP\fIword\fP
+.RE
+.PP
+causes the file whose name is the expansion of
+.I word
+to be opened for both reading and writing on file descriptor
+.IR n ,
+or on file descriptor 0 if
+.I n
+is not specified.  If the file does not exist, it is created.
+.SH ALIASES
+\fIAliases\fP allow a string to be substituted for a word when it is used
+as the first word of a simple command.
+The shell maintains a list of aliases that may be set and unset with the
+.B alias
+and
+.B unalias
+builtin commands (see
+.SM
+.B SHELL BUILTIN COMMANDS
+below).
+The first word of each simple command, if unquoted,
+is checked to see if it has an
+alias.  If so, that word is replaced by the text of the alias.
+The characters \fB/\fP, \fB$\fP, \fB\`\fP, and \fB=\fP and
+any of the shell \fImetacharacters\fP or quoting characters
+listed above may not appear in an alias name.
+The replacement text may contain any valid shell input,
+including shell metacharacters.
+The first word of the replacement text is tested
+for aliases, but a word that is identical to an alias being expanded
+is not expanded a second time.
+This means that one may alias
+.B ls
+to
+.BR "ls \-F" ,
+for instance, and
+.B bash
+does not try to recursively expand the replacement text.
+If the last character of the alias value is a
+.IR blank ,
+then the next command
+word following the alias is also checked for alias expansion.
+.PP
+Aliases are created and listed with the
+.B alias
+command, and removed with the
+.B unalias
+command.
+.PP
+There is no mechanism for using arguments in the replacement text.
+If arguments are needed, a shell function should be used (see
+.SM
+.B FUNCTIONS
+below).
+.PP
+Aliases are not expanded when the shell is not interactive, unless
+the
+.B expand_aliases
+shell option is set using
+.B shopt
+(see the description of
+.B shopt
+under
+.SM
+\fBSHELL BUILTIN COMMANDS\fP
+below).
+.PP
+The rules concerning the definition and use of aliases are
+somewhat confusing.
+.B Bash
+always reads at least one complete line of input,
+and all lines that make up a compound command,
+before executing any of the commands on that line or the compound command.
+Aliases are expanded when a
+command is read, not when it is executed.  Therefore, an
+alias definition appearing on the same line as another
+command does not take effect until the next line of input is read.
+The commands following the alias definition
+on that line are not affected by the new alias.
+This behavior is also an issue when functions are executed.
+Aliases are expanded when a function definition is read,
+not when the function is executed, because a function definition
+is itself a command.  As a consequence, aliases
+defined in a function are not available until after that
+function is executed.  To be safe, always put
+alias definitions on a separate line, and do not use
+.B alias
+in compound commands.
+.PP
+For almost every purpose, aliases are superseded by
+shell functions.
+.SH FUNCTIONS
+A shell function, defined as described above under
+.SM
+.BR "SHELL GRAMMAR" ,
+stores a series of commands for later execution.
+When the name of a shell function is used as a simple command name,
+the list of commands associated with that function name is executed.
+Functions are executed in the context of the
+current shell; no new process is created to interpret
+them (contrast this with the execution of a shell script).
+When a function is executed, the arguments to the
+function become the positional parameters
+during its execution.
+The special parameter
+.B #
+is updated to reflect the change.  Special parameter \fB0\fP
+is unchanged.
+The first element of the
+.SM
+.B FUNCNAME
+variable is set to the name of the function while the function
+is executing.
+.PP
+All other aspects of the shell execution
+environment are identical between a function and its caller
+with these exceptions: the
+.SM
+.B DEBUG
+and
+.B RETURN
+traps (see the description of the
+.B trap
+builtin under
+.SM
+.B SHELL BUILTIN COMMANDS
+below) are not inherited unless the function has been given the
+\fBtrace\fP attribute (see the description of the
+.SM
+.B declare
+builtin below) or the
+\fB\-o functrace\fP shell option has been enabled with
+the \fBset\fP builtin
+(in which case all functions inherit the \fBDEBUG\fP and \fBRETURN\fP traps),
+and the
+.SM
+.B ERR
+trap is not inherited unless the \fB\-o errtrace\fP shell option has
+been enabled.
+.PP
+Variables local to the function may be declared with the
+.B local
+builtin command.  Ordinarily, variables and their values
+are shared between the function and its caller.
+If a variable is declared \fBlocal\fP, the variable's visible scope
+is restricted to that function and its children (including the functions
+it calls).
+Local variables "shadow" variables with the same name declared at
+previous scopes.
+For instance, a local variable declared in a function
+hides a global variable of the same name: references and assignments
+refer to the local variable, leaving the global variable unmodified.
+When the function returns, the global variable is once again visible.
+.PP
+The shell uses \fIdynamic scoping\fP to control a variable's visibility
+within functions.
+With dynamic scoping, visible variables and their values
+are a result of the sequence of function calls that caused execution
+to reach the current function.
+The value of a variable that a function sees depends
+on its value within its caller, if any, whether that caller is
+the "global" scope or another shell function.
+This is also the value that a local variable
+declaration "shadows", and the value that is restored when the function
+returns.
+.PP
+For example, if a variable \fIvar\fP is declared as local in function
+\fIfunc1\fP, and \fIfunc1\fP calls another function \fIfunc2\fP,
+references to \fIvar\fP made from within \fIfunc2\fP will resolve to the
+local variable \fIvar\fP from \fIfunc1\fP, shadowing any global variable
+named \fIvar\fP.
+.PP
+The \fBunset\fP builtin also acts using the same dynamic scope: if a
+variable is local to the current scope, \fBunset\fP will unset it;
+otherwise the unset will refer to the variable found in any calling scope
+as described above.
+If a variable at the current local scope is unset, it will remain so
+until it is reset in that scope or until the function returns.
+Once the function returns, any instance of the variable at a previous
+scope will become visible.
+If the unset acts on a variable at a previous scope, any instance of a
+variable with that name that had been shadowed will become visible.
+.PP
+The \fBFUNCNEST\fP variable, if set to a numeric value greater
+than 0, defines a maximum function nesting level.  Function
+invocations that exceed the limit cause the entire command to
+abort.
+.PP
+If the builtin command
+.B return
+is executed in a function, the function completes and
+execution resumes with the next command after the function
+call.
+Any command associated with the \fBRETURN\fP trap is executed
+before execution resumes.
+When a function completes, the values of the
+positional parameters and the special parameter
+.B #
+are restored to the values they had prior to the function's
+execution.
+.PP
+Function names and definitions may be listed with the
+.B \-f
+option to the
+.B declare
+or
+.B typeset
+builtin commands.  The
+.B \-F
+option to
+.B declare
+or
+.B typeset
+will list the function names only
+(and optionally the source file and line number, if the \fBextdebug\fP
+shell option is enabled).
+Functions may be exported so that subshells
+automatically have them defined with the
+.B \-f
+option to the
+.B export
+builtin.
+A function definition may be deleted using the \fB\-f\fP option to
+the
+.B unset
+builtin.
+.PP
+Functions may be recursive.
+The \fBFUNCNEST\fP variable may be used to limit the depth of the
+function call stack and restrict the number of function invocations.
+By default, no limit is imposed on the number of recursive calls.
+.SH "ARITHMETIC EVALUATION"
+The shell allows arithmetic expressions to be evaluated, under
+certain circumstances (see the \fBlet\fP and \fBdeclare\fP builtin
+commands, the \fB((\fP compound command, and \fBArithmetic Expansion\fP).
+Evaluation is done in fixed-width integers with no check for overflow,
+though division by 0 is trapped and flagged as an error.
+The operators and their precedence, associativity, and values
+are the same as in the C language.
+The following list of operators is grouped into levels of
+equal-precedence operators.
+The levels are listed in order of decreasing precedence.
+.PP
+.PD 0
+.TP
+.B \fIid\fP++ \fIid\fP\-\-
+variable post-increment and post-decrement
+.TP
+.B \- +
+unary minus and plus
+.TP
+.B ++\fIid\fP \-\-\fIid\fP
+variable pre-increment and pre-decrement
+.TP
+.B ! ~
+logical and bitwise negation
+.TP
+.B **
+exponentiation
+.TP
+.B * / %
+multiplication, division, remainder
+.TP
+.B + \-
+addition, subtraction
+.TP
+.B << >>
+left and right bitwise shifts
+.TP
+.B <= >= < >
+comparison
+.TP
+.B == !=
+equality and inequality
+.TP
+.B &
+bitwise AND
+.TP
+.B ^
+bitwise exclusive OR
+.TP
+.B |
+bitwise OR
+.TP
+.B &&
+logical AND
+.TP
+.B ||
+logical OR
+.TP
+.B \fIexpr\fP?\fIexpr\fP:\fIexpr\fP
+conditional operator
+.TP
+.B = *= /= %= += \-= <<= >>= &= ^= |=
+assignment
+.TP
+.B \fIexpr1\fP , \fIexpr2\fP
+comma
+.PD
+.PP
+Shell variables are allowed as operands; parameter expansion is
+performed before the expression is evaluated.
+Within an expression, shell variables may also be referenced by name
+without using the parameter expansion syntax.
+A shell variable that is null or unset evaluates to 0 when referenced
+by name without using the parameter expansion syntax.
+The value of a variable is evaluated as an arithmetic expression
+when it is referenced, or when a variable which has been given the
+\fIinteger\fP attribute using \fBdeclare \-i\fP is assigned a value.
+A null value evaluates to 0.
+A shell variable need not have its \fIinteger\fP attribute
+turned on to be used in an expression.
+.PP
+Integer constants follow the C language definition, without suffixes or
+character constants.
+Constants with a leading 0 are interpreted as octal numbers.
+A leading 0x or 0X denotes hexadecimal.
+Otherwise, numbers take the form [\fIbase#\fP]n, where the optional \fIbase\fP
+is a decimal number between 2 and 64 representing the arithmetic
+base, and \fIn\fP is a number in that base.
+If \fIbase#\fP is omitted, then base 10 is used.
+When specifying \fIn\fP,
+if a non-digit is required,
+the digits greater than 9 are represented by the lowercase letters,
+the uppercase letters, @, and _, in that order.
+If \fIbase\fP is less than or equal to 36, lowercase and uppercase
+letters may be used interchangeably to represent numbers between 10
+and 35.
+.PP
+Operators are evaluated in order of precedence.  Sub-expressions in
+parentheses are evaluated first and may override the precedence
+rules above.
+.SH "CONDITIONAL EXPRESSIONS"
+Conditional expressions are used by the \fB[[\fP compound command and
+the \fBtest\fP and \fB[\fP builtin commands to test file attributes
+and perform string and arithmetic comparisons.
+The \fBtest\fP and \fB[\fP commands determine their behavior based on
+the number of arguments; see the descriptions of those commands for any
+other command-specific actions.
+.PP
+Expressions are formed from the following unary or binary primaries.
+\fBBash\fP handles several filenames specially when they are used in
+expressions.
+If the operating system on which \fBbash\fP is running provides these
+special files, bash will use them; otherwise it will emulate them
+internally with this behavior:
+If any \fIfile\fP argument to one of the primaries is of the form
+\fI/dev/fd/n\fP, then file descriptor \fIn\fP is checked.
+If the \fIfile\fP argument to one of the primaries is one of
+\fI/dev/stdin\fP, \fI/dev/stdout\fP, or \fI/dev/stderr\fP, file
+descriptor 0, 1, or 2, respectively, is checked.
+.PP
+Unless otherwise specified, primaries that operate on files follow symbolic
+links and operate on the target of the link, rather than the link itself.
+.if t .sp 0.5
+.if n .sp 1
+When used with \fB[[\fP, the \fB<\fP and \fB>\fP operators sort
+lexicographically using the current locale.
+The \fBtest\fP command sorts using ASCII ordering.
+.sp 1
+.PD 0
+.TP
+.B \-a \fIfile\fP
+True if \fIfile\fP exists.
+.TP
+.B \-b \fIfile\fP
+True if \fIfile\fP exists and is a block special file.
+.TP
+.B \-c \fIfile\fP
+True if \fIfile\fP exists and is a character special file.
+.TP
+.B \-d \fIfile\fP
+True if \fIfile\fP exists and is a directory.
+.TP
+.B \-e \fIfile\fP
+True if \fIfile\fP exists.
+.TP
+.B \-f \fIfile\fP
+True if \fIfile\fP exists and is a regular file.
+.TP
+.B \-g \fIfile\fP
+True if \fIfile\fP exists and is set-group-id.
+.TP
+.B \-h \fIfile\fP
+True if \fIfile\fP exists and is a symbolic link.
+.TP
+.B \-k \fIfile\fP
+True if \fIfile\fP exists and its ``sticky'' bit is set.
+.TP
+.B \-p \fIfile\fP
+True if \fIfile\fP exists and is a named pipe (FIFO).
+.TP
+.B \-r \fIfile\fP
+True if \fIfile\fP exists and is readable.
+.TP
+.B \-s \fIfile\fP
+True if \fIfile\fP exists and has a size greater than zero.
+.TP
+.B \-t \fIfd\fP
+True if file descriptor
+.I fd
+is open and refers to a terminal.
+.TP
+.B \-u \fIfile\fP
+True if \fIfile\fP exists and its set-user-id bit is set.
+.TP
+.B \-w \fIfile\fP
+True if \fIfile\fP exists and is writable.
+.TP
+.B \-x \fIfile\fP
+True if \fIfile\fP exists and is executable.
+.TP
+.B \-G \fIfile\fP
+True if \fIfile\fP exists and is owned by the effective group id.
+.TP
+.B \-L \fIfile\fP
+True if \fIfile\fP exists and is a symbolic link.
+.TP
+.B \-N \fIfile\fP
+True if \fIfile\fP exists and has been modified since it was last read.
+.TP
+.B \-O \fIfile\fP
+True if \fIfile\fP exists and is owned by the effective user id.
+.TP
+.B \-S \fIfile\fP
+True if \fIfile\fP exists and is a socket.
+.TP
+\fIfile1\fP \fB\-ef\fP \fIfile2\fP
+True if \fIfile1\fP and \fIfile2\fP refer to the same device and
+inode numbers.
+.TP
+\fIfile1\fP \-\fBnt\fP \fIfile2\fP
+True if \fIfile1\fP is newer (according to modification date) than \fIfile2\fP,
+or if \fIfile1\fP exists and \fPfile2\fP does not.
+.TP
+\fIfile1\fP \-\fBot\fP \fIfile2\fP
+True if \fIfile1\fP is older than \fIfile2\fP, or if \fIfile2\fP exists
+and \fIfile1\fP does not.
+.TP
+.B \-o \fIoptname\fP
+True if the shell option
+.I optname
+is enabled.
+See the list of options under the description of the
+.B \-o
+option to the
+.B set
+builtin below.
+.TP
+.B \-v \fIvarname\fP
+True if the shell variable
+.I varname
+is set (has been assigned a value).
+.TP
+.B \-R \fIvarname\fP
+True if the shell variable
+.I varname
+is set and is a name reference.
+.TP
+.B \-z \fIstring\fP
+True if the length of \fIstring\fP is zero.
+.TP
+\fIstring\fP
+.PD 0
+.TP
+.B \-n \fIstring\fP
+.PD
+True if the length of
+.I string
+is non-zero.
+.TP
+\fIstring1\fP \fB==\fP \fIstring2\fP
+.PD 0
+.TP
+\fIstring1\fP \fB=\fP \fIstring2\fP
+.PD
+True if the strings are equal.  \fB=\fP should be used
+with the \fBtest\fP command for POSIX conformance.
+When used with the \fB[[\fP command, this performs pattern matching as
+described above (\fBCompound Commands\fP).
+.TP
+\fIstring1\fP \fB!=\fP \fIstring2\fP
+True if the strings are not equal.
+.TP
+\fIstring1\fP \fB<\fP \fIstring2\fP
+True if \fIstring1\fP sorts before \fIstring2\fP lexicographically.
+.TP
+\fIstring1\fP \fB>\fP \fIstring2\fP
+True if \fIstring1\fP sorts after \fIstring2\fP lexicographically.
+.TP
+.I \fIarg1\fP \fBOP\fP \fIarg2\fP
+.SM
+.B OP
+is one of
+.BR \-eq ,
+.BR \-ne ,
+.BR \-lt ,
+.BR \-le ,
+.BR \-gt ,
+or
+.BR \-ge .
+These arithmetic binary operators return true if \fIarg1\fP
+is equal to, not equal to, less than, less than or equal to,
+greater than, or greater than or equal to \fIarg2\fP, respectively.
+.I Arg1
+and
+.I arg2
+may be positive or negative integers.
+When used with the \fB[[\fP command,
+.I Arg1
+and
+.I Arg2
+are evaluated as arithmetic expressions (see
+.SM
+.B "ARITHMETIC EVALUATION"
+above).
+.PD
+.SH "SIMPLE COMMAND EXPANSION"
+When a simple command is executed, the shell performs the following
+expansions, assignments, and redirections, from left to right, in
+the following order.
+.IP 1.
+The words that the parser has marked as variable assignments (those
+preceding the command name) and redirections are saved for later
+processing.
+.IP 2.
+The words that are not variable assignments or redirections are
+expanded.  If any words remain after expansion, the first word
+is taken to be the name of the command and the remaining words are
+the arguments.
+.IP 3.
+Redirections are performed as described above under
+.SM
+.BR REDIRECTION .
+.IP 4.
+The text after the \fB=\fP in each variable assignment undergoes tilde
+expansion, parameter expansion, command substitution, arithmetic expansion,
+and quote removal before being assigned to the variable.
+.PP
+If no command name results, the variable assignments affect the current
+shell environment.  Otherwise, the variables are added to the environment
+of the executed command and do not affect the current shell environment.
+If any of the assignments attempts to assign a value to a readonly variable,
+an error occurs, and the command exits with a non-zero status.
+.PP
+If no command name results, redirections are performed, but do not
+affect the current shell environment.  A redirection error causes the
+command to exit with a non-zero status.
+.PP
+If there is a command name left after expansion, execution proceeds as
+described below.  Otherwise, the command exits.  If one of the expansions
+contained a command substitution, the exit status of the command is
+the exit status of the last command substitution performed.  If there
+were no command substitutions, the command exits with a status of zero.
+.SH "COMMAND EXECUTION"
+After a command has been split into words, if it results in a
+simple command and an optional list of arguments, the following
+actions are taken.
+.PP
+If the command name contains no slashes, the shell attempts to
+locate it.  If there exists a shell function by that name, that
+function is invoked as described above in
+.SM
+.BR FUNCTIONS .
+If the name does not match a function, the shell searches for
+it in the list of shell builtins.  If a match is found, that
+builtin is invoked.
+.PP
+If the name is neither a shell function nor a builtin,
+and contains no slashes,
+.B bash
+searches each element of the
+.SM
+.B PATH
+for a directory containing an executable file by that name.
+.B Bash
+uses a hash table to remember the full pathnames of executable
+files (see
+.B hash
+under
+.SM
+.B "SHELL BUILTIN COMMANDS"
+below).
+A full search of the directories in
+.SM
+.B PATH
+is performed only if the command is not found in the hash table.
+If the search is unsuccessful, the shell searches for a defined shell
+function named \fBcommand_not_found_handle\fP.
+If that function exists, it is invoked in a separate execution environment
+with the original command and
+the original command's arguments as its arguments, and the function's
+exit status becomes the exit status of that subshell.
+If that function is not defined, the shell prints an error
+message and returns an exit status of 127.
+.PP
+If the search is successful, or if the command name contains
+one or more slashes, the shell executes the named program in a
+separate execution environment.
+Argument 0 is set to the name given, and the remaining arguments
+to the command are set to the arguments given, if any.
+.PP
+If this execution fails because the file is not in executable
+format, and the file is not a directory, it is assumed to be
+a \fIshell script\fP, a file
+containing shell commands.  A subshell is spawned to execute
+it.  This subshell reinitializes itself, so
+that the effect is as if a new shell had been invoked
+to handle the script, with the exception that the locations of
+commands remembered by the parent (see
+.B hash
+below under
+.SM
+\fBSHELL BUILTIN COMMANDS\fP)
+are retained by the child.
+.PP
+If the program is a file beginning with
+.BR #! ,
+the remainder of the first line specifies an interpreter
+for the program.  The shell executes the
+specified interpreter on operating systems that do not
+handle this executable format themselves.  The arguments to the
+interpreter consist of a single optional argument following the
+interpreter name on the first line of the program, followed
+by the name of the program, followed by the command
+arguments, if any.
+.SH COMMAND EXECUTION ENVIRONMENT
+The shell has an \fIexecution environment\fP, which consists of the
+following:
+.IP \(bu
+open files inherited by the shell at invocation, as modified by
+redirections supplied to the \fBexec\fP builtin
+.IP \(bu
+the current working directory as set by \fBcd\fP, \fBpushd\fP, or
+\fBpopd\fP, or inherited by the shell at invocation
+.IP \(bu
+the file creation mode mask as set by \fBumask\fP or inherited from
+the shell's parent
+.IP \(bu
+current traps set by \fBtrap\fP
+.IP \(bu
+shell parameters that are set by variable assignment or with \fBset\fP
+or inherited from the shell's parent in the environment
+.IP \(bu
+shell functions defined during execution or inherited from the shell's
+parent in the environment
+.IP \(bu
+options enabled at invocation (either by default or with command-line
+arguments) or by \fBset\fP
+.IP \(bu
+options enabled by \fBshopt\fP
+.IP \(bu
+shell aliases defined with \fBalias\fP
+.IP \(bu
+various process IDs, including those of background jobs, the value
+of \fB$$\fP, and the value of
+.SM
+.B PPID
+.PP
+When a simple command other than a builtin or shell function
+is to be executed, it
+is invoked in a separate execution environment that consists of
+the following.  Unless otherwise noted, the values are inherited
+from the shell.
+.if n .sp 1
+.IP \(bu
+the shell's open files, plus any modifications and additions specified
+by redirections to the command
+.IP \(bu
+the current working directory
+.IP \(bu
+the file creation mode mask
+.IP \(bu
+shell variables and functions marked for export, along with variables
+exported for the command, passed in the environment
+.IP \(bu
+traps caught by the shell are reset to the values inherited from the
+shell's parent, and traps ignored by the shell are ignored
+.PP
+A command invoked in this separate environment cannot affect the
+shell's execution environment.
+.PP
+Command substitution, commands grouped with parentheses,
+and asynchronous commands are invoked in a
+subshell environment that is a duplicate of the shell environment,
+except that traps caught by the shell are reset to the values
+that the shell inherited from its parent at invocation.  Builtin
+commands that are invoked as part of a pipeline are also executed in a
+subshell environment.  Changes made to the subshell environment
+cannot affect the shell's execution environment.
+.PP
+Subshells spawned to execute command substitutions inherit the value of
+the \fB\-e\fP option from the parent shell.  When not in \fIposix mode\fP,
+\fBbash\fP clears the \fB\-e\fP option in such subshells.
+.PP
+If a command is followed by a \fB&\fP and job control is not active, the
+default standard input for the command is the empty file \fI/dev/null\fP.
+Otherwise, the invoked command inherits the file descriptors of the calling
+shell as modified by redirections.
+.SH ENVIRONMENT
+When a program is invoked it is given an array of strings
+called the
+.IR environment .
+This is a list of
+\fIname\fP\-\fIvalue\fP pairs, of the form
+.IR "name\fR=\fPvalue" .
+.PP
+The shell provides several ways to manipulate the environment.
+On invocation, the shell scans its own environment and
+creates a parameter for each name found, automatically marking
+it for
+.I export
+to child processes.  Executed commands inherit the environment.
+The
+.B export
+and
+.B declare \-x
+commands allow parameters and functions to be added to and
+deleted from the environment.  If the value of a parameter
+in the environment is modified, the new value becomes part
+of the environment, replacing the old.  The environment
+inherited by any executed command consists of the shell's
+initial environment, whose values may be modified in the shell,
+less any pairs removed by the
+.B unset
+command, plus any additions via the
+.B export
+and
+.B declare \-x
+commands.
+.PP
+The environment for any
+.I simple command
+or function may be augmented temporarily by prefixing it with
+parameter assignments, as described above in
+.SM
+.BR PARAMETERS .
+These assignment statements affect only the environment seen
+by that command.
+.PP
+If the
+.B \-k
+option is set (see the
+.B set
+builtin command below), then
+.I all
+parameter assignments are placed in the environment for a command,
+not just those that precede the command name.
+.PP
+When
+.B bash
+invokes an external command, the variable
+.B _
+is set to the full filename of the command and passed to that
+command in its environment.
+.SH "EXIT STATUS"
+The exit status of an executed command is the value returned by the
+\fIwaitpid\fP system call or equivalent function.  Exit statuses
+fall between 0 and 255, though, as explained below, the shell may
+use values above 125 specially.  Exit statuses from shell builtins and
+compound commands are also limited to this range.  Under certain
+circumstances, the shell will use special values to indicate specific
+failure modes.
+.PP
+For the shell's purposes, a command which exits with a
+zero exit status has succeeded.  An exit status of zero
+indicates success.  A non-zero exit status indicates failure.
+When a command terminates on a fatal signal \fIN\fP, \fBbash\fP uses
+the value of 128+\fIN\fP as the exit status.
+.PP
+If a command is not found, the child process created to
+execute it returns a status of 127.  If a command is found
+but is not executable, the return status is 126.
+.PP
+If a command fails because of an error during expansion or redirection,
+the exit status is greater than zero.
+.PP
+Shell builtin commands return a status of 0 (\fItrue\fP) if
+successful, and non-zero (\fIfalse\fP) if an error occurs
+while they execute.
+All builtins return an exit status of 2 to indicate incorrect usage,
+generally invalid options or missing arguments.
+.PP
+\fBBash\fP itself returns the exit status of the last command
+executed, unless a syntax error occurs, in which case it exits
+with a non-zero value.  See also the \fBexit\fP builtin
+command below.
+.SH SIGNALS
+When \fBbash\fP is interactive, in the absence of any traps, it ignores
+.SM
+.B SIGTERM
+(so that \fBkill 0\fP does not kill an interactive shell),
+and
+.SM
+.B SIGINT
+is caught and handled (so that the \fBwait\fP builtin is interruptible).
+In all cases, \fBbash\fP ignores
+.SM
+.BR SIGQUIT .
+If job control is in effect,
+.B bash
+ignores
+.SM
+.BR SIGTTIN ,
+.SM
+.BR SIGTTOU ,
+and
+.SM
+.BR SIGTSTP .
+.PP
+Non-builtin commands run by \fBbash\fP have signal handlers
+set to the values inherited by the shell from its parent.
+When job control is not in effect, asynchronous commands
+ignore
+.SM
+.B SIGINT
+and
+.SM
+.B SIGQUIT
+in addition to these inherited handlers.
+Commands run as a result of command substitution ignore the
+keyboard-generated job control signals
+.SM
+.BR SIGTTIN ,
+.SM
+.BR SIGTTOU ,
+and
+.SM
+.BR SIGTSTP .
+.PP
+The shell exits by default upon receipt of a
+.SM
+.BR SIGHUP .
+Before exiting, an interactive shell resends the
+.SM
+.B SIGHUP
+to all jobs, running or stopped.
+Stopped jobs are sent
+.SM
+.B SIGCONT
+to ensure that they receive the
+.SM
+.BR SIGHUP .
+To prevent the shell from
+sending the signal to a particular job, it should be removed from the
+jobs table with the
+.B disown
+builtin (see
+.SM
+.B "SHELL BUILTIN COMMANDS"
+below) or marked
+to not receive
+.SM
+.B SIGHUP
+using
+.BR "disown \-h" .
+.PP
+If the
+.B huponexit
+shell option has been set with
+.BR shopt ,
+.B bash
+sends a
+.SM
+.B SIGHUP
+to all jobs when an interactive login shell exits.
+.PP
+If \fBbash\fP is waiting for a command to complete and receives a signal
+for which a trap has been set, the trap will not be executed until
+the command completes.
+When \fBbash\fP is waiting for an asynchronous command via the \fBwait\fP
+builtin, the reception of a signal for which a trap has been set will
+cause the \fBwait\fP builtin to return immediately with an exit status
+greater than 128, immediately after which the trap is executed.
+.SH "JOB CONTROL"
+.I Job control
+refers to the ability to selectively stop (\fIsuspend\fP)
+the execution of processes and continue (\fIresume\fP)
+their execution at a later point.  A user typically employs
+this facility via an interactive interface supplied jointly
+by the operating system kernel's terminal driver and
+.BR bash .
+.PP
+The shell associates a
+.I job
+with each pipeline.  It keeps a table of currently executing
+jobs, which may be listed with the
+.B jobs
+command.  When
+.B bash
+starts a job asynchronously (in the
+.IR background ),
+it prints a line that looks like:
+.RS
+.PP
+[1] 25647
+.RE
+.PP
+indicating that this job is job number 1 and that the process ID
+of the last process in the pipeline associated with this job is 25647.
+All of the processes in a single pipeline are members of the same job.
+.B Bash
+uses the
+.I job
+abstraction as the basis for job control.
+.PP
+To facilitate the implementation of the user interface to job
+control, the operating system maintains the notion of a \fIcurrent terminal
+process group ID\fP.  Members of this process group (processes whose
+process group ID is equal to the current terminal process group ID)
+receive keyboard-generated signals such as
+.SM
+.BR SIGINT .
+These processes are said to be in the
+.IR foreground .
+.I Background
+processes are those whose process group ID differs from the terminal's;
+such processes are immune to keyboard-generated signals.
+Only foreground processes are allowed to read from or, if the
+user so specifies with \f(CWstty tostop\fP, write to the
+terminal.
+Background processes which attempt to read from (write to when
+\f(CWstty tostop\fP is in effect) the
+terminal are sent a
+.SM
+.B SIGTTIN (SIGTTOU)
+signal by the kernel's terminal driver,
+which, unless caught, suspends the process.
+.PP
+If the operating system on which
+.B bash
+is running supports
+job control,
+.B bash
+contains facilities to use it.
+Typing the
+.I suspend
+character (typically
+.BR ^Z ,
+Control-Z) while a process is running
+causes that process to be stopped and returns control to
+.BR bash .
+Typing the
+.I "delayed suspend"
+character (typically
+.BR ^Y ,
+Control-Y) causes the process to be stopped when it
+attempts to read input from the terminal, and control to
+be returned to
+.BR bash .
+The user may then manipulate the state of this job, using the
+.B bg
+command to continue it in the background, the
+.B fg
+command to continue it in the foreground, or
+the
+.B kill
+command to kill it.  A \fB^Z\fP takes effect immediately,
+and has the additional side effect of causing pending output
+and typeahead to be discarded.
+.PP
+There are a number of ways to refer to a job in the shell.
+The character
+.B %
+introduces a job specification (\fIjobspec\fP).  Job number
+.I n
+may be referred to as
+.BR %n .
+A job may also be referred to using a prefix of the name used to
+start it, or using a substring that appears in its command line.
+For example,
+.B %ce
+refers to a stopped
+job whose command name begins with
+.BR ce .
+If a prefix matches more than one job,
+.B bash
+reports an error.  Using
+.BR %?ce ,
+on the other hand, refers to any job containing the string
+.B ce
+in its command line.  If the substring matches more than one job,
+.B bash
+reports an error.  The symbols
+.B %%
+and
+.B %+
+refer to the shell's notion of the
+.IR "current job" ,
+which is the last job stopped while it was in
+the foreground or started in the background.
+The
+.I "previous job"
+may be referenced using
+.BR %\- .
+If there is only a single job, \fB%+\fP and \fB%\-\fP can both be used
+to refer to that job.
+In output pertaining to jobs (e.g., the output of the
+.B jobs
+command), the current job is always flagged with a
+.BR + ,
+and the previous job with a
+.BR \- .
+A single % (with no accompanying job specification) also refers to the
+current job.
+.PP
+Simply naming a job can be used to bring it into the
+foreground:
+.B %1
+is a synonym for
+\fB``fg %1''\fP,
+bringing job 1 from the background into the foreground.
+Similarly,
+.B ``%1 &''
+resumes job 1 in the background, equivalent to
+\fB``bg %1''\fP.
+.PP
+The shell learns immediately whenever a job changes state.
+Normally,
+.B bash
+waits until it is about to print a prompt before reporting
+changes in a job's status so as to not interrupt
+any other output.  If the
+.B \-b
+option to the
+.B set
+builtin command
+is enabled,
+.B bash
+reports such changes immediately.
+Any trap on
+.SM
+.B SIGCHLD
+is executed for each child that exits.
+.PP
+If an attempt to exit
+.B bash
+is made while jobs are stopped (or, if the \fBcheckjobs\fP shell option has
+been enabled using the \fBshopt\fP builtin, running), the shell prints a
+warning message, and, if the \fBcheckjobs\fP option is enabled, lists the
+jobs and their statuses.
+The
+.B jobs
+command may then be used to inspect their status.
+If a second attempt to exit is made without an intervening command,
+the shell does not print another warning, and any stopped
+jobs are terminated.
+.PP
+When the shell is waiting for a job or process using the \fBwait\fP
+builtin, and job control is enabled, \fBwait\fP will return when the
+job changes state. The \fB\-f\fP option causes \fBwait\fP to wait
+until the job or process terminates before returning.
+.SH PROMPTING
+When executing interactively,
+.B bash
+displays the primary prompt
+.SM
+.B PS1
+when it is ready to read a command, and the secondary prompt
+.SM
+.B PS2
+when it needs more input to complete a command.
+.B Bash
+displays
+.SM
+.B PS0
+after it reads a command but before executing it.
+.B Bash
+displays
+.SM
+.B PS4
+as described above
+before tracing each command when the \fB\-x\fP option is enabled.
+.B Bash
+allows these prompt strings to be customized by inserting a number of
+backslash-escaped special characters that are decoded as follows:
+.RS
+.PD 0
+.TP
+.B \ea
+an ASCII bell character (07)
+.TP
+.B \ed
+the date in "Weekday Month Date" format (e.g., "Tue May 26")
+.TP
+.B \eD{\fIformat\fP}
+the \fIformat\fP is passed to \fIstrftime\fP(3) and the result is inserted
+into the prompt string; an empty \fIformat\fP results in a locale-specific
+time representation.  The braces are required
+.TP
+.B \ee
+an ASCII escape character (033)
+.TP
+.B \eh
+the hostname up to the first `.'
+.TP
+.B \eH
+the hostname
+.TP
+.B \ej
+the number of jobs currently managed by the shell
+.TP
+.B \el
+the basename of the shell's terminal device name
+.TP
+.B \en
+newline
+.TP
+.B \er
+carriage return
+.TP
+.B \es
+the name of the shell, the basename of
+.B $0
+(the portion following the final slash)
+.TP
+.B \et
+the current time in 24-hour HH:MM:SS format
+.TP
+.B \eT
+the current time in 12-hour HH:MM:SS format
+.TP
+.B \e@
+the current time in 12-hour am/pm format
+.TP
+.B \eA
+the current time in 24-hour HH:MM format
+.TP
+.B \eu
+the username of the current user
+.TP
+.B \ev
+the version of \fBbash\fP (e.g., 2.00)
+.TP
+.B \eV
+the release of \fBbash\fP, version + patch level (e.g., 2.00.0)
+.TP
+.B \ew
+the current working directory, with
+.SM
+.B $HOME
+abbreviated with a tilde
+(uses the value of the
+.SM
+.B PROMPT_DIRTRIM
+variable)
+.TP
+.B \eW
+the basename of the current working directory, with
+.SM
+.B $HOME
+abbreviated with a tilde
+.TP
+.B \e!
+the history number of this command
+.TP
+.B \e#
+the command number of this command
+.TP
+.B \e$
+if the effective UID is 0, a
+.BR # ,
+otherwise a
+.B $
+.TP
+.B \e\fInnn\fP
+the character corresponding to the octal number \fInnn\fP
+.TP
+.B \e\e
+a backslash
+.TP
+.B \e[
+begin a sequence of non-printing characters, which could be used to
+embed a terminal control sequence into the prompt
+.TP
+.B \e]
+end a sequence of non-printing characters
+.PD
+.RE
+.PP
+The command number and the history number are usually different:
+the history number of a command is its position in the history
+list, which may include commands restored from the history file
+(see
+.SM
+.B HISTORY
+below), while the command number is the position in the sequence
+of commands executed during the current shell session.
+After the string is decoded, it is expanded via
+parameter expansion, command substitution, arithmetic
+expansion, and quote removal, subject to the value of the
+.B promptvars
+shell option (see the description of the
+.B shopt
+command under
+.SM
+.B "SHELL BUILTIN COMMANDS"
+below).
+This can have unwanted side effects if escaped portions of the string
+appear within command substitution or contain characters special to
+word expansion.
+.SH READLINE
+This is the library that handles reading input when using an interactive
+shell, unless the
+.B \-\-noediting
+option is given at shell invocation.
+Line editing is also used when using the \fB\-e\fP option to the
+\fBread\fP builtin.
+By default, the line editing commands are similar to those of Emacs.
+A vi-style line editing interface is also available.
+Line editing can be enabled at any time using the
+.B \-o emacs
+or
+.B \-o vi
+options to the
+.B set
+builtin (see
+.SM
+.B SHELL BUILTIN COMMANDS
+below).
+To turn off line editing after the shell is running, use the
+.B +o emacs
+or
+.B +o vi
+options to the
+.B set
+builtin.
+.SS "Readline Notation"
+In this section, the Emacs-style notation is used to denote
+keystrokes.  Control keys are denoted by C\-\fIkey\fR, e.g., C\-n
+means Control\-N.  Similarly,
+.I meta
+keys are denoted by M\-\fIkey\fR, so M\-x means Meta\-X.  (On keyboards
+without a
+.I meta
+key, M\-\fIx\fP means ESC \fIx\fP, i.e., press the Escape key
+then the
+.I x
+key.  This makes ESC the \fImeta prefix\fP.
+The combination M\-C\-\fIx\fP means ESC\-Control\-\fIx\fP,
+or press the Escape key
+then hold the Control key while pressing the
+.I x
+key.)
+.PP
+Readline commands may be given numeric
+.IR arguments ,
+which normally act as a repeat count.
+Sometimes, however, it is the sign of the argument that is significant.
+Passing a negative argument to a command that acts in the forward
+direction (e.g., \fBkill\-line\fP) causes that command to act in a
+backward direction.
+Commands whose behavior with arguments deviates from this are noted
+below.
+.PP
+When a command is described as \fIkilling\fP text, the text
+deleted is saved for possible future retrieval
+(\fIyanking\fP).  The killed text is saved in a
+\fIkill ring\fP.  Consecutive kills cause the text to be
+accumulated into one unit, which can be yanked all at once.
+Commands which do not kill text separate the chunks of text
+on the kill ring.
+.SS "Readline Initialization"
+Readline is customized by putting commands in an initialization
+file (the \fIinputrc\fP file).
+The name of this file is taken from the value of the
+.SM
+.B INPUTRC
+variable.  If that variable is unset, the default is
+.IR ~/.inputrc .
+If that file  does not exist or cannot be read, the ultimate default is
+.IR /etc/inputrc .
+When a program which uses the readline library starts up, the
+initialization file is read, and the key bindings and variables
+are set.
+There are only a few basic constructs allowed in the
+readline initialization file.
+Blank lines are ignored.
+Lines beginning with a \fB#\fP are comments.
+Lines beginning with a \fB$\fP indicate conditional constructs.
+Other lines denote key bindings and variable settings.
+.PP
+The default key-bindings may be changed with an
+.I inputrc
+file.
+Other programs that use this library may add their own commands
+and bindings.
+.PP
+For example, placing
+.RS
+.PP
+M\-Control\-u: universal\-argument
+.RE
+or
+.RS
+C\-Meta\-u: universal\-argument
+.RE
+into the
+.I inputrc
+would make M\-C\-u execute the readline command
+.IR universal\-argument .
+.PP
+The following symbolic character names are recognized:
+.IR RUBOUT ,
+.IR DEL ,
+.IR ESC ,
+.IR LFD ,
+.IR NEWLINE ,
+.IR RET ,
+.IR RETURN ,
+.IR SPC ,
+.IR SPACE ,
+and
+.IR TAB .
+.PP
+In addition to command names, readline allows keys to be bound
+to a string that is inserted when the key is pressed (a \fImacro\fP).
+.SS "Readline Key Bindings"
+The syntax for controlling key bindings in the
+.I inputrc
+file is simple.  All that is required is the name of the
+command or the text of a macro and a key sequence to which
+it should be bound.  The name may be specified in one of two ways:
+as a symbolic key name, possibly with \fIMeta\-\fP or \fIControl\-\fP
+prefixes, or as a key sequence.
+.PP
+When using the form \fBkeyname\fP:\^\fIfunction\-name\fP or \fImacro\fP,
+.I keyname
+is the name of a key spelled out in English.  For example:
+.sp
+.RS
+Control-u: universal\-argument
+.br
+Meta-Rubout: backward-kill-word
+.br
+Control-o: "> output"
+.RE
+.LP
+In the above example,
+.I C\-u
+is bound to the function
+.BR universal\-argument ,
+.I M\-DEL
+is bound to the function
+.BR backward\-kill\-word ,
+and
+.I C\-o
+is bound to run the macro
+expressed on the right hand side (that is, to insert the text
+.if t \f(CW> output\fP
+.if n ``> output''
+into the line).
+.PP
+In the second form, \fB"keyseq"\fP:\^\fIfunction\-name\fP or \fImacro\fP,
+.B keyseq
+differs from
+.B keyname
+above in that strings denoting
+an entire key sequence may be specified by placing the sequence
+within double quotes.  Some GNU Emacs style key escapes can be
+used, as in the following example, but the symbolic character names
+are not recognized.
+.sp
+.RS
+"\eC\-u": universal\-argument
+.br
+"\eC\-x\eC\-r": re\-read\-init\-file
+.br
+"\ee[11~": "Function Key 1"
+.RE
+.PP
+In this example,
+.I C\-u
+is again bound to the function
+.BR universal\-argument .
+.I "C\-x C\-r"
+is bound to the function
+.BR re\-read\-init\-file ,
+and
+.I "ESC [ 1 1 ~"
+is bound to insert the text
+.if t \f(CWFunction Key 1\fP.
+.if n ``Function Key 1''.
+.PP
+The full set of GNU Emacs style escape sequences is
+.RS
+.PD 0
+.TP
+.B \eC\-
+control prefix
+.TP
+.B \eM\-
+meta prefix
+.TP
+.B \ee
+an escape character
+.TP
+.B \e\e
+backslash
+.TP
+.B \e"
+literal "
+.TP
+.B \e\(aq
+literal \(aq
+.RE
+.PD
+.PP
+In addition to the GNU Emacs style escape sequences, a second
+set of backslash escapes is available:
+.RS
+.PD 0
+.TP
+.B \ea
+alert (bell)
+.TP
+.B \eb
+backspace
+.TP
+.B \ed
+delete
+.TP
+.B \ef
+form feed
+.TP
+.B \en
+newline
+.TP
+.B \er
+carriage return
+.TP
+.B \et
+horizontal tab
+.TP
+.B \ev
+vertical tab
+.TP
+.B \e\fInnn\fP
+the eight-bit character whose value is the octal value \fInnn\fP
+(one to three digits)
+.TP
+.B \ex\fIHH\fP
+the eight-bit character whose value is the hexadecimal value \fIHH\fP
+(one or two hex digits)
+.RE
+.PD
+.PP
+When entering the text of a macro, single or double quotes must
+be used to indicate a macro definition.
+Unquoted text is assumed to be a function name.
+In the macro body, the backslash escapes described above are expanded.
+Backslash will quote any other character in the macro text,
+including " and \(aq.
+.PP
+.B Bash
+allows the current readline key bindings to be displayed or modified
+with the
+.B bind
+builtin command.  The editing mode may be switched during interactive
+use by using the
+.B \-o
+option to the
+.B set
+builtin command (see
+.SM
+.B SHELL BUILTIN COMMANDS
+below).
+.SS "Readline Variables"
+Readline has variables that can be used to further customize its
+behavior.  A variable may be set in the
+.I inputrc
+file with a statement of the form
+.RS
+.PP
+\fBset\fP \fIvariable\-name\fP \fIvalue\fP
+.RE
+or using the \fBbind\fP builtin command (see
+.SM
+.B SHELL BUILTIN COMMANDS
+below).
+.PP
+Except where noted, readline variables can take the values
+.B On
+or
+.B Off
+(without regard to case).
+Unrecognized variable names are ignored.
+When a variable value is read, empty or null values, "on" (case-insensitive),
+and "1" are equivalent to \fBOn\fP.  All other values are equivalent to
+\fBOff\fP.
+The variables and their default values are:
+.PP
+.PD 0
+.TP
+.B bell\-style (audible)
+Controls what happens when readline wants to ring the terminal bell.
+If set to \fBnone\fP, readline never rings the bell.  If set to
+\fBvisible\fP, readline uses a visible bell if one is available.
+If set to \fBaudible\fP, readline attempts to ring the terminal's bell.
+.TP
+.B bind\-tty\-special\-chars (On)
+If set to \fBOn\fP, readline attempts to bind the control characters
+treated specially by the kernel's terminal driver to their readline
+equivalents.
+.TP
+.B blink\-matching\-paren (Off)
+If set to \fBOn\fP, readline attempts to briefly move the cursor to an
+opening parenthesis when a closing parenthesis is inserted.
+.TP
+.B colored\-completion\-prefix (Off)
+If set to \fBOn\fP, when listing completions, readline displays the
+common prefix of the set of possible completions using a different color.
+The color definitions are taken from the value of the \fBLS_COLORS\fP
+environment variable.
+.TP
+.B colored\-stats (Off)
+If set to \fBOn\fP, readline displays possible completions using different
+colors to indicate their file type.
+The color definitions are taken from the value of the \fBLS_COLORS\fP
+environment variable.
+.TP
+.B comment\-begin (``#'')
+The string that is inserted when the readline
+.B insert\-comment
+command is executed.
+This command is bound to
+.B M\-#
+in emacs mode and to
+.B #
+in vi command mode.
+.TP
+.B completion\-display\-width (\-1)
+The number of screen columns used to display possible matches
+when performing completion.
+The value is ignored if it is less than 0 or greater than the terminal
+screen width.
+A value of 0 will cause matches to be displayed one per line.
+The default value is \-1.
+.TP
+.B completion\-ignore\-case (Off)
+If set to \fBOn\fP, readline performs filename matching and completion
+in a case\-insensitive fashion.
+.TP
+.B completion\-map\-case (Off)
+If set to \fBOn\fP, and \fBcompletion\-ignore\-case\fP is enabled, readline
+treats hyphens (\fI\-\fP) and underscores (\fI_\fP) as equivalent when
+performing case\-insensitive filename matching and completion.
+.TP
+.B completion\-prefix\-display\-length (0)
+The length in characters of the common prefix of a list of possible
+completions that is displayed without modification.  When set to a
+value greater than zero, common prefixes longer than this value are
+replaced with an ellipsis when displaying possible completions.
+.TP
+.B completion\-query\-items (100)
+This determines when the user is queried about viewing
+the number of possible completions
+generated by the \fBpossible\-completions\fP command.
+It may be set to any integer value greater than or equal to zero.
+If the number of possible completions is greater than
+or equal to the value of this variable,
+readline will ask whether or not the user wishes to view them;
+otherwise they are simply listed on the terminal.
+.TP
+.B convert\-meta (On)
+If set to \fBOn\fP, readline will convert characters with the
+eighth bit set to an ASCII key sequence
+by stripping the eighth bit and prefixing an
+escape character (in effect, using escape as the \fImeta prefix\fP).
+The default is \fIOn\fP, but readline will set it to \fIOff\fP if the
+locale contains eight-bit characters.
+.TP
+.B disable\-completion (Off)
+If set to \fBOn\fP, readline will inhibit word completion.  Completion
+characters will be inserted into the line as if they had been
+mapped to \fBself-insert\fP.
+.TP
+.B echo\-control\-characters (On)
+When set to \fBOn\fP, on operating systems that indicate they support it,
+readline echoes a character corresponding to a signal generated from the
+keyboard.
+.TP
+.B editing\-mode (emacs)
+Controls whether readline begins with a set of key bindings similar
+to \fIEmacs\fP or \fIvi\fP.
+.B editing\-mode
+can be set to either
+.B emacs
+or
+.BR vi .
+.TP
+.B emacs\-mode\-string (@)
+If the \fIshow\-mode\-in\-prompt\fP variable is enabled,
+this string is displayed immediately before the last line of the primary
+prompt when emacs editing mode is active.  The value is expanded like a
+key binding, so the standard set of meta- and control prefixes and
+backslash escape sequences is available.
+Use the \e1 and \e2 escapes to begin and end sequences of
+non-printing characters, which can be used to embed a terminal control
+sequence into the mode string.
+.TP
+.B enable\-bracketed\-paste (On)
+When set to \fBOn\fP, readline will configure the terminal in a way
+that will enable it to insert each paste into the editing buffer as a
+single string of characters, instead of treating each character as if
+it had been read from the keyboard.  This can prevent pasted characters
+from being interpreted as editing commands.
+.TP
+.B enable\-keypad (Off)
+When set to \fBOn\fP, readline will try to enable the application
+keypad when it is called.  Some systems need this to enable the
+arrow keys.
+.TP
+.B enable\-meta\-key (On)
+When set to \fBOn\fP, readline will try to enable any meta modifier
+key the terminal claims to support when it is called.  On many terminals,
+the meta key is used to send eight-bit characters.
+.TP
+.B expand\-tilde (Off)
+If set to \fBOn\fP, tilde expansion is performed when readline
+attempts word completion.
+.TP
+.B history\-preserve\-point (Off)
+If set to \fBOn\fP, the history code attempts to place point at the
+same location on each history line retrieved with \fBprevious-history\fP
+or \fBnext-history\fP.
+.TP
+.B history\-size (unset)
+Set the maximum number of history entries saved in the history list.
+If set to zero, any existing history entries are deleted and no new entries
+are saved.
+If set to a value less than zero, the number of history entries is not
+limited.
+By default, the number of history entries is set to the value of the
+\fBHISTSIZE\fP shell variable.
+If an attempt is made to set \fIhistory\-size\fP to a non-numeric value,
+the maximum number of history entries will be set to 500.
+.TP
+.B horizontal\-scroll\-mode (Off)
+When set to \fBOn\fP, makes readline use a single line for display,
+scrolling the input horizontally on a single screen line when it
+becomes longer than the screen width rather than wrapping to a new line.
+This setting is automatically enabled for terminals of height 1.
+.TP
+.B input\-meta (Off)
+If set to \fBOn\fP, readline will enable eight-bit input (that is,
+it will not strip the eighth bit from the characters it reads),
+regardless of what the terminal claims it can support.  The name
+.B meta\-flag
+is a synonym for this variable.
+The default is \fIOff\fP, but readline will set it to \fIOn\fP if the
+locale contains eight-bit characters.
+.TP
+.B isearch\-terminators (``C\-[C\-J'')
+The string of characters that should terminate an incremental
+search without subsequently executing the character as a command.
+If this variable has not been given a value, the characters
+\fIESC\fP and \fIC\-J\fP will terminate an incremental search.
+.TP
+.B keymap (emacs)
+Set the current readline keymap.  The set of valid keymap names is
+\fIemacs, emacs\-standard, emacs\-meta, emacs\-ctlx, vi,
+vi\-command\fP, and
+.IR vi\-insert .
+\fIvi\fP is equivalent to \fIvi\-command\fP; \fIemacs\fP is
+equivalent to \fIemacs\-standard\fP.  The default value is
+.IR emacs ;
+the value of
+.B editing\-mode
+also affects the default keymap.
+.TP
+.B keyseq\-timeout (500)
+Specifies the duration \fIreadline\fP will wait for a character when reading an
+ambiguous key sequence (one that can form a complete key sequence using
+the input read so far, or can take additional input to complete a longer
+key sequence).
+If no input is received within the timeout, \fIreadline\fP will use the shorter
+but complete key sequence.
+The value is specified in milliseconds, so a value of 1000 means that
+\fIreadline\fP will wait one second for additional input.
+If this variable is set to a value less than or equal to zero, or to a
+non-numeric value, \fIreadline\fP will wait until another key is pressed to
+decide which key sequence to complete.
+.TP
+.B mark\-directories (On)
+If set to \fBOn\fP, completed directory names have a slash
+appended.
+.TP
+.B mark\-modified\-lines (Off)
+If set to \fBOn\fP, history lines that have been modified are displayed
+with a preceding asterisk (\fB*\fP).
+.TP
+.B mark\-symlinked\-directories (Off)
+If set to \fBOn\fP, completed names which are symbolic links to directories
+have a slash appended (subject to the value of
+\fBmark\-directories\fP).
+.TP
+.B match\-hidden\-files (On)
+This variable, when set to \fBOn\fP, causes readline to match files whose
+names begin with a `.' (hidden files) when performing filename
+completion.
+If set to \fBOff\fP, the leading `.' must be
+supplied by the user in the filename to be completed.
+.TP
+.B menu\-complete\-display\-prefix (Off)
+If set to \fBOn\fP, menu completion displays the common prefix of the
+list of possible completions (which may be empty) before cycling through
+the list.
+.TP
+.B output\-meta (Off)
+If set to \fBOn\fP, readline will display characters with the
+eighth bit set directly rather than as a meta-prefixed escape
+sequence.
+The default is \fIOff\fP, but readline will set it to \fIOn\fP if the
+locale contains eight-bit characters.
+.TP
+.B page\-completions (On)
+If set to \fBOn\fP, readline uses an internal \fImore\fP-like pager
+to display a screenful of possible completions at a time.
+.TP
+.B print\-completions\-horizontally (Off)
+If set to \fBOn\fP, readline will display completions with matches
+sorted horizontally in alphabetical order, rather than down the screen.
+.TP
+.B revert\-all\-at\-newline (Off)
+If set to \fBOn\fP, readline will undo all changes to history lines
+before returning when \fBaccept\-line\fP is executed.  By default,
+history lines may be modified and retain individual undo lists across
+calls to \fBreadline\fP.
+.TP
+.B show\-all\-if\-ambiguous (Off)
+This alters the default behavior of the completion functions.  If
+set to
+.BR On ,
+words which have more than one possible completion cause the
+matches to be listed immediately instead of ringing the bell.
+.TP
+.B show\-all\-if\-unmodified (Off)
+This alters the default behavior of the completion functions in
+a fashion similar to \fBshow\-all\-if\-ambiguous\fP.
+If set to
+.BR On ,
+words which have more than one possible completion without any
+possible partial completion (the possible completions don't share
+a common prefix) cause the matches to be listed immediately instead
+of ringing the bell.
+.TP
+.B show\-mode\-in\-prompt (Off)
+If set to \fBOn\fP, add a string to the beginning of the prompt
+indicating the editing mode: emacs, vi command, or vi insertion.
+The mode strings are user-settable (e.g., \fIemacs\-mode\-string\fP).
+.TP
+.B skip\-completed\-text (Off)
+If set to \fBOn\fP, this alters the default completion behavior when
+inserting a single match into the line.  It's only active when
+performing completion in the middle of a word.  If enabled, readline
+does not insert characters from the completion that match characters
+after point in the word being completed, so portions of the word
+following the cursor are not duplicated.
+.TP
+.B vi\-cmd\-mode\-string ((cmd))
+If the \fIshow\-mode\-in\-prompt\fP variable is enabled,
+this string is displayed immediately before the last line of the primary
+prompt when vi editing mode is active and in command mode.
+The value is expanded like a
+key binding, so the standard set of meta- and control prefixes and
+backslash escape sequences is available.
+Use the \e1 and \e2 escapes to begin and end sequences of
+non-printing characters, which can be used to embed a terminal control
+sequence into the mode string.
+.TP
+.B vi\-ins\-mode\-string ((ins))
+If the \fIshow\-mode\-in\-prompt\fP variable is enabled,
+this string is displayed immediately before the last line of the primary
+prompt when vi editing mode is active and in insertion mode.
+The value is expanded like a
+key binding, so the standard set of meta- and control prefixes and
+backslash escape sequences is available.
+Use the \e1 and \e2 escapes to begin and end sequences of
+non-printing characters, which can be used to embed a terminal control
+sequence into the mode string.
+.TP
+.B visible\-stats (Off)
+If set to \fBOn\fP, a character denoting a file's type as reported
+by \fIstat\fP(2) is appended to the filename when listing possible
+completions.
+.PD
+.SS "Readline Conditional Constructs"
+Readline implements a facility similar in spirit to the conditional
+compilation features of the C preprocessor which allows key
+bindings and variable settings to be performed as the result
+of tests.  There are four parser directives used.
+.IP \fB$if\fP
+The
+.B $if
+construct allows bindings to be made based on the
+editing mode, the terminal being used, or the application using
+readline.  The text of the test, after any comparison operator,
+ extends to the end of the line;
+unless otherwise noted, no characters are required to isolate it.
+.RS
+.IP \fBmode\fP
+The \fBmode=\fP form of the \fB$if\fP directive is used to test
+whether readline is in emacs or vi mode.
+This may be used in conjunction
+with the \fBset keymap\fP command, for instance, to set bindings in
+the \fIemacs\-standard\fP and \fIemacs\-ctlx\fP keymaps only if
+readline is starting out in emacs mode.
+.IP \fBterm\fP
+The \fBterm=\fP form may be used to include terminal-specific
+key bindings, perhaps to bind the key sequences output by the
+terminal's function keys.  The word on the right side of the
+.B =
+is tested against both the full name of the terminal and the portion
+of the terminal name before the first \fB\-\fP.  This allows
+.I sun
+to match both
+.I sun
+and
+.IR sun\-cmd ,
+for instance.
+.IP \fBversion\fP
+The \fBversion\fP test may be used to perform comparisons against
+specific readline versions.
+The \fBversion\fP expands to the current readline version.
+The set of comparison operators includes
+.BR = ,
+(and
+.BR == ),
+.BR != ,
+.BR <= ,
+.BR >= ,
+.BR < ,
+and
+.BR > .
+The version number supplied on the right side of the operator consists
+of a major version number, an optional decimal point, and an optional
+minor version (e.g., \fB7.1\fP). If the minor version is omitted, it
+is assumed to be \fB0\fP.
+The operator may be separated from the string \fBversion\fP
+and from the version number argument by whitespace.
+.IP \fBapplication\fP
+The \fBapplication\fP construct is used to include
+application-specific settings.  Each program using the readline
+library sets the \fIapplication name\fP, and an initialization
+file can test for a particular value.
+This could be used to bind key sequences to functions useful for
+a specific program.  For instance, the following command adds a
+key sequence that quotes the current or previous word in \fBbash\fP:
+.sp 1
+.RS
+.nf
+\fB$if\fP Bash
+# Quote the current or previous word
+"\eC\-xq": "\eeb\e"\eef\e""
+\fB$endif\fP
+.fi
+.RE
+.IP \fIvariable\fP
+The \fIvariable\fP construct provides simple equality tests for readline
+variables and values.
+The permitted comparison operators are \fI=\fP, \fI==\fP, and \fI!=\fP.
+The variable name must be separated from the comparison operator by
+whitespace; the operator may be separated from the value on the right hand
+side by whitespace.
+Both string and boolean variables may be tested. Boolean variables must be
+tested against the values \fIon\fP and \fIoff\fP.
+.RE
+.IP \fB$endif\fP
+This command, as seen in the previous example, terminates an
+\fB$if\fP command.
+.IP \fB$else\fP
+Commands in this branch of the \fB$if\fP directive are executed if
+the test fails.
+.IP \fB$include\fP
+This directive takes a single filename as an argument and reads commands
+and bindings from that file.  For example, the following directive
+would read \fI/etc/inputrc\fP:
+.sp 1
+.RS
+.nf
+\fB$include\fP \^ \fI/etc/inputrc\fP
+.fi
+.RE
+.SS Searching
+Readline provides commands for searching through the command history
+(see
+.SM
+.B HISTORY
+below) for lines containing a specified string.
+There are two search modes:
+.I incremental
+and
+.IR non-incremental .
+.PP
+Incremental searches begin before the user has finished typing the
+search string.
+As each character of the search string is typed, readline displays
+the next entry from the history matching the string typed so far.
+An incremental search requires only as many characters as needed to
+find the desired history entry.
+The characters present in the value of the \fBisearch-terminators\fP
+variable are used to terminate an incremental search.
+If that variable has not been assigned a value the Escape and
+Control-J characters will terminate an incremental search.
+Control-G will abort an incremental search and restore the original
+line.
+When the search is terminated, the history entry containing the
+search string becomes the current line.
+.PP
+To find other matching entries in the history list, type Control-S or
+Control-R as appropriate.
+This will search backward or forward in the history for the next
+entry matching the search string typed so far.
+Any other key sequence bound to a readline command will terminate
+the search and execute that command.
+For instance, a \fInewline\fP will terminate the search and accept
+the line, thereby executing the command from the history list.
+.PP
+Readline remembers the last incremental search string.  If two
+Control-Rs are typed without any intervening characters defining a
+new search string, any remembered search string is used.
+.PP
+Non-incremental searches read the entire search string before starting
+to search for matching history lines.  The search string may be
+typed by the user or be part of the contents of the current line.
+.SS "Readline Command Names"
+The following is a list of the names of the commands and the default
+key sequences to which they are bound.
+Command names without an accompanying key sequence are unbound by default.
+In the following descriptions, \fIpoint\fP refers to the current cursor
+position, and \fImark\fP refers to a cursor position saved by the
+\fBset\-mark\fP command.
+The text between the point and mark is referred to as the \fIregion\fP.
+.SS Commands for Moving
+.PD 0
+.TP
+.B beginning\-of\-line (C\-a)
+Move to the start of the current line.
+.TP
+.B end\-of\-line (C\-e)
+Move to the end of the line.
+.TP
+.B forward\-char (C\-f)
+Move forward a character.
+.TP
+.B backward\-char (C\-b)
+Move back a character.
+.TP
+.B forward\-word (M\-f)
+Move forward to the end of the next word.  Words are composed of
+alphanumeric characters (letters and digits).
+.TP
+.B backward\-word (M\-b)
+Move back to the start of the current or previous word.
+Words are composed of alphanumeric characters (letters and digits).
+.TP
+.B shell\-forward\-word
+Move forward to the end of the next word.
+Words are delimited by non-quoted shell metacharacters.
+.TP
+.B shell\-backward\-word
+Move back to the start of the current or previous word.
+Words are delimited by non-quoted shell metacharacters.
+.TP
+.B previous\-screen\-line
+Attempt to move point to the same physical screen column on the previous
+physical screen line. This will not have the desired effect if the current
+Readline line does not take up more than one physical line or if point is not
+greater than the length of the prompt plus the screen width.
+.TP
+.B next\-screen\-line
+Attempt to move point to the same physical screen column on the next
+physical screen line. This will not have the desired effect if the current
+Readline line does not take up more than one physical line or if the length
+of the current Readline line is not greater than the length of the prompt
+plus the screen width.
+.TP
+.B clear\-display (M\-C\-l)
+Clear the screen and, if possible, the terminal's scrollback buffer,
+then redraw the current line,
+leaving the current line at the top of the screen.
+.TP
+.B clear\-screen (C\-l)
+Clear the screen,
+then redraw the current line,
+leaving the current line at the top of the screen.
+With an argument, refresh the current line without clearing the
+screen.
+.TP
+.B redraw\-current\-line
+Refresh the current line.
+.PD
+.SS Commands for Manipulating the History
+.PD 0
+.TP
+.B accept\-line (Newline, Return)
+Accept the line regardless of where the cursor is.  If this line is
+non-empty, add it to the history list according to the state of the
+.SM
+.B HISTCONTROL
+variable.  If the line is a modified history
+line, then restore the history line to its original state.
+.TP
+.B previous\-history (C\-p)
+Fetch the previous command from the history list, moving back in
+the list.
+.TP
+.B next\-history (C\-n)
+Fetch the next command from the history list, moving forward in the
+list.
+.TP
+.B beginning\-of\-history (M\-<)
+Move to the first line in the history.
+.TP
+.B end\-of\-history (M\->)
+Move to the end of the input history, i.e., the line currently being
+entered.
+.TP
+.B reverse\-search\-history (C\-r)
+Search backward starting at the current line and moving `up' through
+the history as necessary.  This is an incremental search.
+.TP
+.B forward\-search\-history (C\-s)
+Search forward starting at the current line and moving `down' through
+the history as necessary.  This is an incremental search.
+.TP
+.B non\-incremental\-reverse\-search\-history (M\-p)
+Search backward through the history starting at the current line
+using a non-incremental search for a string supplied by the user.
+.TP
+.B non\-incremental\-forward\-search\-history (M\-n)
+Search forward through the history using a non-incremental search for
+a string supplied by the user.
+.TP
+.B history\-search\-forward
+Search forward through the history for the string of characters
+between the start of the current line and the point.
+This is a non-incremental search.
+.TP
+.B history\-search\-backward
+Search backward through the history for the string of characters
+between the start of the current line and the point.
+This is a non-incremental search.
+.TP
+.B history\-substring\-search\-backward
+Search backward through the history for the string of characters
+between the start of the current line and the current cursor
+position (the \fIpoint\fP).
+The search string may match anywhere in a history line.
+This is a non-incremental search.
+.TP
+.B history\-substring\-search\-forward
+Search forward through the history for the string of characters
+between the start of the current line and the point.
+The search string may match anywhere in a history line.
+This is a non-incremental search.
+.TP
+.B yank\-nth\-arg (M\-C\-y)
+Insert the first argument to the previous command (usually
+the second word on the previous line) at point.
+With an argument
+.IR n ,
+insert the \fIn\fPth word from the previous command (the words
+in the previous command begin with word 0).  A negative argument
+inserts the \fIn\fPth word from the end of the previous command.
+Once the argument \fIn\fP is computed, the argument is extracted
+as if the "!\fIn\fP" history expansion had been specified.
+.TP
+.B
+yank\-last\-arg (M\-.\^, M\-_\^)
+Insert the last argument to the previous command (the last word of
+the previous history entry).
+With a numeric argument, behave exactly like \fByank\-nth\-arg\fP.
+Successive calls to \fByank\-last\-arg\fP move back through the history
+list, inserting the last word (or the word specified by the argument to
+the first call) of each line in turn.
+Any numeric argument supplied to these successive calls determines
+the direction to move through the history.  A negative argument switches
+the direction through the history (back or forward).
+The history expansion facilities are used to extract the last word,
+as if the "!$" history expansion had been specified.
+.TP
+.B shell\-expand\-line (M\-C\-e)
+Expand the line as the shell does.  This
+performs alias and history expansion as well as all of the shell
+word expansions.  See
+.SM
+.B HISTORY EXPANSION
+below for a description of history expansion.
+.TP
+.B history\-expand\-line (M\-^)
+Perform history expansion on the current line.
+See
+.SM
+.B HISTORY EXPANSION
+below for a description of history expansion.
+.TP
+.B magic\-space
+Perform history expansion on the current line and insert a space.
+See
+.SM
+.B HISTORY EXPANSION
+below for a description of history expansion.
+.TP
+.B alias\-expand\-line
+Perform alias expansion on the current line.
+See
+.SM
+.B ALIASES
+above for a description of alias expansion.
+.TP
+.B history\-and\-alias\-expand\-line
+Perform history and alias expansion on the current line.
+.TP
+.B insert\-last\-argument (M\-.\^, M\-_\^)
+A synonym for \fByank\-last\-arg\fP.
+.TP
+.B operate\-and\-get\-next (C\-o)
+Accept the current line for execution and fetch the next line
+relative to the current line from the history for editing.
+A numeric argument, if supplied, specifies the history entry to use instead
+of the current line.
+.TP
+.B edit\-and\-execute\-command (C\-x C\-e)
+Invoke an editor on the current command line, and execute the result as shell
+commands.
+\fBBash\fP attempts to invoke
+.SM
+.BR $VISUAL ,
+.SM
+.BR $EDITOR ,
+and \fIemacs\fP as the editor, in that order.
+.PD
+.SS Commands for Changing Text
+.PD 0
+.TP
+.B \fIend\-of\-file\fP (usually C\-d)
+The character indicating end-of-file as set, for example, by
+.if t \f(CWstty\fP.
+.if n ``stty''.
+If this character is read when there are no characters
+on the line, and point is at the beginning of the line, Readline
+interprets it as the end of input and returns
+.SM
+.BR EOF .
+.TP
+.B delete\-char (C\-d)
+Delete the character at point.
+If this function is bound to the
+same character as the tty \fBEOF\fP character, as \fBC\-d\fP
+commonly is, see above for the effects.
+.TP
+.B backward\-delete\-char (Rubout)
+Delete the character behind the cursor.  When given a numeric argument,
+save the deleted text on the kill ring.
+.TP
+.B forward\-backward\-delete\-char
+Delete the character under the cursor, unless the cursor is at the
+end of the line, in which case the character behind the cursor is
+deleted.
+.TP
+.B quoted\-insert (C\-q, C\-v)
+Add the next character typed to the line verbatim.  This is
+how to insert characters like \fBC\-q\fP, for example.
+.TP
+.B tab\-insert (C\-v TAB)
+Insert a tab character.
+.TP
+.B self\-insert (a,\ b,\ A,\ 1,\ !,\ ...)
+Insert the character typed.
+.TP
+.B transpose\-chars (C\-t)
+Drag the character before point forward over the character at point,
+moving point forward as well.
+If point is at the end of the line, then this transposes
+the two characters before point.
+Negative arguments have no effect.
+.TP
+.B transpose\-words (M\-t)
+Drag the word before point past the word after point,
+moving point over that word as well.
+If point is at the end of the line, this transposes
+the last two words on the line.
+.TP
+.B upcase\-word (M\-u)
+Uppercase the current (or following) word.  With a negative argument,
+uppercase the previous word, but do not move point.
+.TP
+.B downcase\-word (M\-l)
+Lowercase the current (or following) word.  With a negative argument,
+lowercase the previous word, but do not move point.
+.TP
+.B capitalize\-word (M\-c)
+Capitalize the current (or following) word.  With a negative argument,
+capitalize the previous word, but do not move point.
+.TP
+.B overwrite\-mode
+Toggle overwrite mode.  With an explicit positive numeric argument,
+switches to overwrite mode.  With an explicit non-positive numeric
+argument, switches to insert mode.  This command affects only
+\fBemacs\fP mode; \fBvi\fP mode does overwrite differently.
+Each call to \fIreadline()\fP starts in insert mode.
+In overwrite mode, characters bound to \fBself\-insert\fP replace
+the text at point rather than pushing the text to the right.
+Characters bound to \fBbackward\-delete\-char\fP replace the character
+before point with a space.  By default, this command is unbound.
+.PD
+.SS Killing and Yanking
+.PD 0
+.TP
+.B kill\-line (C\-k)
+Kill the text from point to the end of the line.
+.TP
+.B backward\-kill\-line (C\-x Rubout)
+Kill backward to the beginning of the line.
+.TP
+.B unix\-line\-discard (C\-u)
+Kill backward from point to the beginning of the line.
+The killed text is saved on the kill-ring.
+.\" There is no real difference between this and backward-kill-line
+.TP
+.B kill\-whole\-line
+Kill all characters on the current line, no matter where point is.
+.TP
+.B kill\-word (M\-d)
+Kill from point to the end of the current word, or if between
+words, to the end of the next word.
+Word boundaries are the same as those used by \fBforward\-word\fP.
+.TP
+.B backward\-kill\-word (M\-Rubout)
+Kill the word behind point.
+Word boundaries are the same as those used by \fBbackward\-word\fP.
+.TP
+.B shell\-kill\-word
+Kill from point to the end of the current word, or if between
+words, to the end of the next word.
+Word boundaries are the same as those used by \fBshell\-forward\-word\fP.
+.TP
+.B shell\-backward\-kill\-word
+Kill the word behind point.
+Word boundaries are the same as those used by \fBshell\-backward\-word\fP.
+.TP
+.B unix\-word\-rubout (C\-w)
+Kill the word behind point, using white space as a word boundary.
+The killed text is saved on the kill-ring.
+.TP
+.B unix\-filename\-rubout
+Kill the word behind point, using white space and the slash character
+as the word boundaries.
+The killed text is saved on the kill-ring.
+.TP
+.B delete\-horizontal\-space (M\-\e)
+Delete all spaces and tabs around point.
+.TP
+.B kill\-region
+Kill the text in the current region.
+.TP
+.B copy\-region\-as\-kill
+Copy the text in the region to the kill buffer.
+.TP
+.B copy\-backward\-word
+Copy the word before point to the kill buffer.
+The word boundaries are the same as \fBbackward\-word\fP.
+.TP
+.B copy\-forward\-word
+Copy the word following point to the kill buffer.
+The word boundaries are the same as \fBforward\-word\fP.
+.TP
+.B yank (C\-y)
+Yank the top of the kill ring into the buffer at point.
+.TP
+.B yank\-pop (M\-y)
+Rotate the kill ring, and yank the new top.  Only works following
+.B yank
+or
+.BR yank\-pop .
+.PD
+.SS Numeric Arguments
+.PD 0
+.TP
+.B digit\-argument (M\-0, M\-1, ..., M\-\-)
+Add this digit to the argument already accumulating, or start a new
+argument.  M\-\- starts a negative argument.
+.TP
+.B universal\-argument
+This is another way to specify an argument.
+If this command is followed by one or more digits, optionally with a
+leading minus sign, those digits define the argument.
+If the command is followed by digits, executing
+.B universal\-argument
+again ends the numeric argument, but is otherwise ignored.
+As a special case, if this command is immediately followed by a
+character that is neither a digit nor minus sign, the argument count
+for the next command is multiplied by four.
+The argument count is initially one, so executing this function the
+first time makes the argument count four, a second time makes the
+argument count sixteen, and so on.
+.PD
+.SS Completing
+.PD 0
+.TP
+.B complete (TAB)
+Attempt to perform completion on the text before point.
+.B Bash
+attempts completion treating the text as a variable (if the
+text begins with \fB$\fP), username (if the text begins with
+\fB~\fP), hostname (if the text begins with \fB@\fP), or
+command (including aliases and functions) in turn.  If none
+of these produces a match, filename completion is attempted.
+.TP
+.B possible\-completions (M\-?)
+List the possible completions of the text before point.
+.TP
+.B insert\-completions (M\-*)
+Insert all completions of the text before point
+that would have been generated by
+\fBpossible\-completions\fP.
+.TP
+.B menu\-complete
+Similar to \fBcomplete\fP, but replaces the word to be completed
+with a single match from the list of possible completions.
+Repeated execution of \fBmenu\-complete\fP steps through the list
+of possible completions, inserting each match in turn.
+At the end of the list of completions, the bell is rung
+(subject to the setting of \fBbell\-style\fP)
+and the original text is restored.
+An argument of \fIn\fP moves \fIn\fP positions forward in the list
+of matches; a negative argument may be used to move backward
+through the list.
+This command is intended to be bound to \fBTAB\fP, but is unbound
+by default.
+.TP
+.B menu\-complete\-backward
+Identical to \fBmenu\-complete\fP, but moves backward through the list
+of possible completions, as if \fBmenu\-complete\fP had been given a
+negative argument.  This command is unbound by default.
+.TP
+.B delete\-char\-or\-list
+Deletes the character under the cursor if not at the beginning or
+end of the line (like \fBdelete\-char\fP).
+If at the end of the line, behaves identically to
+\fBpossible\-completions\fP.
+This command is unbound by default.
+.TP
+.B complete\-filename (M\-/)
+Attempt filename completion on the text before point.
+.TP
+.B possible\-filename\-completions (C\-x /)
+List the possible completions of the text before point,
+treating it as a filename.
+.TP
+.B complete\-username (M\-~)
+Attempt completion on the text before point, treating
+it as a username.
+.TP
+.B possible\-username\-completions (C\-x ~)
+List the possible completions of the text before point,
+treating it as a username.
+.TP
+.B complete\-variable (M\-$)
+Attempt completion on the text before point, treating
+it as a shell variable.
+.TP
+.B possible\-variable\-completions (C\-x $)
+List the possible completions of the text before point,
+treating it as a shell variable.
+.TP
+.B complete\-hostname (M\-@)
+Attempt completion on the text before point, treating
+it as a hostname.
+.TP
+.B possible\-hostname\-completions (C\-x @)
+List the possible completions of the text before point,
+treating it as a hostname.
+.TP
+.B complete\-command (M\-!)
+Attempt completion on the text before point, treating
+it as a command name.  Command completion attempts to
+match the text against aliases, reserved words, shell
+functions, shell builtins, and finally executable filenames,
+in that order.
+.TP
+.B possible\-command\-completions (C\-x !)
+List the possible completions of the text before point,
+treating it as a command name.
+.TP
+.B dynamic\-complete\-history (M\-TAB)
+Attempt completion on the text before point, comparing
+the text against lines from the history list for possible
+completion matches.
+.TP
+.B dabbrev\-expand
+Attempt menu completion on the text before point, comparing
+the text against lines from the history list for possible
+completion matches.
+.TP
+.B complete\-into\-braces (M\-{)
+Perform filename completion and insert the list of possible completions
+enclosed within braces so the list is available to the shell (see
+.B Brace Expansion
+above).
+.PD
+.SS Keyboard Macros
+.PD 0
+.TP
+.B start\-kbd\-macro (C\-x (\^)
+Begin saving the characters typed into the current keyboard macro.
+.TP
+.B end\-kbd\-macro (C\-x )\^)
+Stop saving the characters typed into the current keyboard macro
+and store the definition.
+.TP
+.B call\-last\-kbd\-macro (C\-x e)
+Re-execute the last keyboard macro defined, by making the characters
+in the macro appear as if typed at the keyboard.
+.TP
+.B print\-last\-kbd\-macro ()
+Print the last keyboard macro defined in a format suitable for the
+\fIinputrc\fP file.
+.PD
+.SS Miscellaneous
+.PD 0
+.TP
+.B re\-read\-init\-file (C\-x C\-r)
+Read in the contents of the \fIinputrc\fP file, and incorporate
+any bindings or variable assignments found there.
+.TP
+.B abort (C\-g)
+Abort the current editing command and
+ring the terminal's bell (subject to the setting of
+.BR bell\-style ).
+.TP
+.B do\-lowercase\-version (M\-A, M\-B, M\-\fIx\fP, ...)
+If the metafied character \fIx\fP is uppercase, run the command
+that is bound to the corresponding metafied lowercase character.
+The behavior is undefined if \fIx\fP is already lowercase.
+.TP
+.B prefix\-meta (ESC)
+Metafy the next character typed.
+.SM
+.B ESC
+.B f
+is equivalent to
+.BR Meta\-f .
+.TP
+.B undo (C\-_, C\-x C\-u)
+Incremental undo, separately remembered for each line.
+.TP
+.B revert\-line (M\-r)
+Undo all changes made to this line.  This is like executing the
+.B undo
+command enough times to return the line to its initial state.
+.TP
+.B tilde\-expand (M\-&)
+Perform tilde expansion on the current word.
+.TP
+.B set\-mark (C\-@, M\-<space>)
+Set the mark to the point.  If a
+numeric argument is supplied, the mark is set to that position.
+.TP
+.B exchange\-point\-and\-mark (C\-x C\-x)
+Swap the point with the mark.  The current cursor position is set to
+the saved position, and the old cursor position is saved as the mark.
+.TP
+.B character\-search (C\-])
+A character is read and point is moved to the next occurrence of that
+character.  A negative count searches for previous occurrences.
+.TP
+.B character\-search\-backward (M\-C\-])
+A character is read and point is moved to the previous occurrence of that
+character.  A negative count searches for subsequent occurrences.
+.TP
+.B skip\-csi\-sequence
+Read enough characters to consume a multi-key sequence such as those
+defined for keys like Home and End.  Such sequences begin with a
+Control Sequence Indicator (CSI), usually ESC\-[.  If this sequence is
+bound to "\e[", keys producing such sequences will have no effect
+unless explicitly bound to a readline command, instead of inserting
+stray characters into the editing buffer.  This is unbound by default,
+but usually bound to ESC\-[.
+.TP
+.B insert\-comment (M\-#)
+Without a numeric argument, the value of the readline
+.B comment\-begin
+variable is inserted at the beginning of the current line.
+If a numeric argument is supplied, this command acts as a toggle: if
+the characters at the beginning of the line do not match the value
+of \fBcomment\-begin\fP, the value is inserted, otherwise
+the characters in \fBcomment\-begin\fP are deleted from the beginning of
+the line.
+In either case, the line is accepted as if a newline had been typed.
+The default value of
+\fBcomment\-begin\fP causes this command to make the current line
+a shell comment.
+If a numeric argument causes the comment character to be removed, the line
+will be executed by the shell.
+.TP
+.B glob\-complete\-word (M\-g)
+The word before point is treated as a pattern for pathname expansion,
+with an asterisk implicitly appended.  This pattern is used to
+generate a list of matching filenames for possible completions.
+.TP
+.B glob\-expand\-word (C\-x *)
+The word before point is treated as a pattern for pathname expansion,
+and the list of matching filenames is inserted, replacing the word.
+If a numeric argument is supplied, an asterisk is appended before
+pathname expansion.
+.TP
+.B glob\-list\-expansions (C\-x g)
+The list of expansions that would have been generated by
+.B glob\-expand\-word
+is displayed, and the line is redrawn.
+If a numeric argument is supplied, an asterisk is appended before
+pathname expansion.
+.TP
+.B dump\-functions
+Print all of the functions and their key bindings to the
+readline output stream.  If a numeric argument is supplied,
+the output is formatted in such a way that it can be made part
+of an \fIinputrc\fP file.
+.TP
+.B dump\-variables
+Print all of the settable readline variables and their values to the
+readline output stream.  If a numeric argument is supplied,
+the output is formatted in such a way that it can be made part
+of an \fIinputrc\fP file.
+.TP
+.B dump\-macros
+Print all of the readline key sequences bound to macros and the
+strings they output.  If a numeric argument is supplied,
+the output is formatted in such a way that it can be made part
+of an \fIinputrc\fP file.
+.TP
+.B display\-shell\-version (C\-x C\-v)
+Display version information about the current instance of
+.BR bash .
+.PD
+.SS Programmable Completion
+When word completion is attempted for an argument to a command for
+which a completion specification (a \fIcompspec\fP) has been defined
+using the \fBcomplete\fP builtin (see
+.SM
+.B "SHELL BUILTIN COMMANDS"
+below), the programmable completion facilities are invoked.
+.PP
+First, the command name is identified.
+If the command word is the empty string (completion attempted at the
+beginning of an empty line), any compspec defined with
+the \fB\-E\fP option to \fBcomplete\fP is used.
+If a compspec has been defined for that command, the
+compspec is used to generate the list of possible completions for the word.
+If the command word is a full pathname, a compspec for the full
+pathname is searched for first.
+If no compspec is found for the full pathname, an attempt is made to
+find a compspec for the portion following the final slash.
+If those searches do not result in a compspec, any compspec defined with
+the \fB\-D\fP option to \fBcomplete\fP is used as the default.
+If there is no default compspec, \fBbash\fP attempts alias expansion
+on the command word as a final resort, and attempts to find a compspec
+for the command word from any successful expansion.
+.PP
+Once a compspec has been found, it is used to generate the list of
+matching words.
+If a compspec is not found, the default \fBbash\fP completion as
+described above under \fBCompleting\fP is performed.
+.PP
+First, the actions specified by the compspec are used.
+Only matches which are prefixed by the word being completed are
+returned.
+When the
+.B \-f
+or
+.B \-d
+option is used for filename or directory name completion, the shell
+variable
+.SM
+.B FIGNORE
+is used to filter the matches.
+.PP
+Any completions specified by a pathname expansion pattern to the
+\fB\-G\fP option are generated next.
+The words generated by the pattern need not match the word
+being completed.
+The
+.SM
+.B GLOBIGNORE
+shell variable is not used to filter the matches, but the
+.SM
+.B FIGNORE
+variable is used.
+.PP
+Next, the string specified as the argument to the \fB\-W\fP option
+is considered.
+The string is first split using the characters in the
+.SM
+.B IFS
+special variable as delimiters.
+Shell quoting is honored.
+Each word is then expanded using
+brace expansion, tilde expansion, parameter and variable expansion,
+command substitution, and arithmetic expansion,
+as described above under
+.SM
+.BR EXPANSION .
+The results are split using the rules described above under
+\fBWord Splitting\fP.
+The results of the expansion are prefix-matched against the word being
+completed, and the matching words become the possible completions.
+.PP
+After these matches have been generated, any shell function or command
+specified with the \fB\-F\fP and \fB\-C\fP options is invoked.
+When the command or function is invoked, the
+.SM
+.BR COMP_LINE ,
+.SM
+.BR COMP_POINT ,
+.SM
+.BR COMP_KEY ,
+and
+.SM
+.B COMP_TYPE
+variables are assigned values as described above under
+\fBShell Variables\fP.
+If a shell function is being invoked, the
+.SM
+.B COMP_WORDS
+and
+.SM
+.B COMP_CWORD
+variables are also set.
+When the function or command is invoked,
+the first argument (\fB$1\fP) is the name of the command whose arguments are
+being completed,
+the second argument (\fB$2\fP) is the word being completed,
+and the third argument (\fB$3\fP) is the word preceding the word being
+completed on the current command line.
+No filtering of the generated completions against the word being completed
+is performed; the function or command has complete freedom in generating
+the matches.
+.PP
+Any function specified with \fB\-F\fP is invoked first.
+The function may use any of the shell facilities, including the
+\fBcompgen\fP builtin described below, to generate the matches.
+It must put the possible completions in the
+.SM
+.B COMPREPLY
+array variable, one per array element.
+.PP
+Next, any command specified with the \fB\-C\fP option is invoked
+in an environment equivalent to command substitution.
+It should print a list of completions, one per line, to the
+standard output.
+Backslash may be used to escape a newline, if necessary.
+.PP
+After all of the possible completions are generated, any filter
+specified with the \fB\-X\fP option is applied to the list.
+The filter is a pattern as used for pathname expansion; a \fB&\fP
+in the pattern is replaced with the text of the word being completed.
+A literal \fB&\fP may be escaped with a backslash; the backslash
+is removed before attempting a match.
+Any completion that matches the pattern will be removed from the list.
+A leading \fB!\fP negates the pattern; in this case any completion
+not matching the pattern will be removed.
+If the
+.B nocasematch
+shell option is enabled, the match is performed without regard to the case
+of alphabetic characters.
+.PP
+Finally, any prefix and suffix specified with the \fB\-P\fP and \fB\-S\fP
+options are added to each member of the completion list, and the result is
+returned to the readline completion code as the list of possible
+completions.
+.PP
+If the previously-applied actions do not generate any matches, and the
+\fB\-o dirnames\fP option was supplied to \fBcomplete\fP when the
+compspec was defined, directory name completion is attempted.
+.PP
+If the \fB\-o plusdirs\fP option was supplied to \fBcomplete\fP when the
+compspec was defined, directory name completion is attempted and any
+matches are added to the results of the other actions.
+.PP
+By default, if a compspec is found, whatever it generates is returned
+to the completion code as the full set of possible completions.
+The default \fBbash\fP completions are not attempted, and the readline
+default of filename completion is disabled.
+If the \fB\-o bashdefault\fP option was supplied to \fBcomplete\fP when
+the compspec was defined, the \fBbash\fP default completions are attempted
+if the compspec generates no matches.
+If the \fB\-o default\fP option was supplied to \fBcomplete\fP when the
+compspec was defined, readline's default completion will be performed
+if the compspec (and, if attempted, the default \fBbash\fP completions)
+generate no matches.
+.PP
+When a compspec indicates that directory name completion is desired,
+the programmable completion functions force readline to append a slash
+to completed names which are symbolic links to directories, subject to
+the value of the \fBmark\-directories\fP readline variable, regardless
+of the setting of the \fBmark-symlinked\-directories\fP readline variable.
+.PP
+There is some support for dynamically modifying completions.  This is
+most useful when used in combination with a default completion specified
+with \fBcomplete \-D\fP.
+It's possible for shell functions executed as completion
+handlers to indicate that completion should be retried by returning an
+exit status of 124.  If a shell function returns 124, and changes
+the compspec associated with the command on which completion is being
+attempted (supplied as the first argument when the function is executed),
+programmable completion restarts from the beginning, with an
+attempt to find a new compspec for that command.  This allows a set of
+completions to be built dynamically as completion is attempted, rather than
+being loaded all at once.
+.PP
+For instance, assuming that there is a library of compspecs, each kept in a
+file corresponding to the name of the command, the following default
+completion function would load completions dynamically:
+.PP
+\f(CW_completion_loader()
+.br
+{
+.br
+	. "/etc/bash_completion.d/$1.sh" >/dev/null 2>&1 && return 124
+.br
+}
+.br
+complete -D -F _completion_loader -o bashdefault -o default
+.br
+\fP
+.SH HISTORY
+When the
+.B \-o history
+option to the
+.B set
+builtin is enabled, the shell provides access to the
+\fIcommand history\fP,
+the list of commands previously typed.
+The value of the
+.SM
+.B HISTSIZE
+variable is used as the
+number of commands to save in a history list.
+The text of the last
+.SM
+.B HISTSIZE
+commands (default 500) is saved.  The shell
+stores each command in the history list prior to parameter and
+variable expansion (see
+.SM
+.B EXPANSION
+above) but after history expansion is performed, subject to the
+values of the shell variables
+.SM
+.B HISTIGNORE
+and
+.SM
+.BR HISTCONTROL .
+.PP
+On startup, the history is initialized from the file named by
+the variable
+.SM
+.B HISTFILE
+(default \fI~/.bash_history\fP).
+The file named by the value of
+.SM
+.B HISTFILE
+is truncated, if necessary, to contain no more than
+the number of lines specified by the value of
+.SM
+.BR HISTFILESIZE .
+If \fBHISTFILESIZE\fP is unset, or set to null, a non-numeric value,
+or a numeric value less than zero, the history file is not truncated.
+When the history file is read,
+lines beginning with the history comment character followed immediately
+by a digit are interpreted as timestamps for the following history line.
+These timestamps are optionally displayed depending on the value of the
+.SM
+.B HISTTIMEFORMAT
+variable.
+When a shell with history enabled exits, the last
+.SM
+.B $HISTSIZE
+lines are copied from the history list to
+.SM
+.BR $HISTFILE .
+If the
+.B histappend
+shell option is enabled
+(see the description of
+.B shopt
+under
+.SM
+.B "SHELL BUILTIN COMMANDS"
+below), the lines are appended to the history file,
+otherwise the history file is overwritten.
+If
+.SM
+.B HISTFILE
+is unset, or if the history file is unwritable, the history is
+not saved.
+If the
+.SM
+.B HISTTIMEFORMAT
+variable is set, time stamps are written to the history file, marked
+with the history comment character, so
+they may be preserved across shell sessions.
+This uses the history comment character to distinguish timestamps from
+other history lines.
+After saving the history, the history file is truncated
+to contain no more than
+.SM
+.B HISTFILESIZE
+lines.  If
+.SM
+.B HISTFILESIZE
+is unset, or set to null, a non-numeric value,
+or a numeric value less than zero, the history file is not truncated.
+.PP
+The builtin command
+.B fc
+(see
+.SM
+.B SHELL BUILTIN COMMANDS
+below) may be used to list or edit and re-execute a portion of
+the history list.
+The
+.B history
+builtin may be used to display or modify the history list and
+manipulate the history file.
+When using command-line editing, search commands
+are available in each editing mode that provide access to the
+history list.
+.PP
+The shell allows control over which commands are saved on the history
+list.  The
+.SM
+.B HISTCONTROL
+and
+.SM
+.B HISTIGNORE
+variables may be set to cause the shell to save only a subset of the
+commands entered.
+The
+.B cmdhist
+shell option, if enabled, causes the shell to attempt to save each
+line of a multi-line command in the same history entry, adding
+semicolons where necessary to preserve syntactic correctness.
+The
+.B lithist
+shell option causes the shell to save the command with embedded newlines
+instead of semicolons.  See the description of the
+.B shopt
+builtin below under
+.SM
+.B "SHELL BUILTIN COMMANDS"
+for information on setting and unsetting shell options.
+.SH "HISTORY EXPANSION"
+The shell supports a history expansion feature that
+is similar to the history expansion in
+.BR csh .
+This section describes what syntax features are available.  This
+feature is enabled by default for interactive shells, and can be
+disabled using the
+.B +H
+option to the
+.B set
+builtin command (see
+.SM
+.B SHELL BUILTIN COMMANDS
+below).  Non-interactive shells do not perform history expansion
+by default.
+.PP
+History expansions introduce words from the history list into
+the input stream, making it easy to repeat commands, insert the
+arguments to a previous command into the current input line, or
+fix errors in previous commands quickly.
+.PP
+History expansion is performed immediately after a complete line
+is read, before the shell breaks it into words, and is performed
+on each line individually without taking quoting on previous lines into
+account.
+It takes place in two parts.
+The first is to determine which line from the history list
+to use during substitution.
+The second is to select portions of that line for inclusion into
+the current one.
+The line selected from the history is the \fIevent\fP,
+and the portions of that line that are acted upon are \fIwords\fP.
+Various \fImodifiers\fP are available to manipulate the selected words.
+The line is broken into words in the same fashion as when reading input,
+so that several \fImetacharacter\fP-separated words surrounded by
+quotes are considered one word.
+History expansions are introduced by the appearance of the
+history expansion character, which is \^\fB!\fP\^ by default.
+Only backslash (\^\fB\e\fP\^) and single quotes can quote
+the history expansion character, but the history expansion character is
+also treated as quoted if it immediately precedes the closing double quote
+in a double-quoted string.
+.PP
+Several characters inhibit history expansion if found immediately
+following the history expansion character, even if it is unquoted:
+space, tab, newline, carriage return, and \fB=\fP.
+If the \fBextglob\fP shell option is enabled, \fB(\fP will also
+inhibit expansion.
+.PP
+Several shell options settable with the
+.B shopt
+builtin may be used to tailor the behavior of history expansion.
+If the
+.B histverify
+shell option is enabled (see the description of the
+.B shopt
+builtin below), and
+.B readline
+is being used, history substitutions are not immediately passed to
+the shell parser.
+Instead, the expanded line is reloaded into the
+.B readline
+editing buffer for further modification.
+If
+.B readline
+is being used, and the
+.B histreedit
+shell option is enabled, a failed history substitution will be reloaded
+into the
+.B readline
+editing buffer for correction.
+The
+.B \-p
+option to the
+.B history
+builtin command may be used to see what a history expansion will
+do before using it.
+The
+.B \-s
+option to the
+.B history
+builtin may be used to add commands to the end of the history list
+without actually executing them, so that they are available for
+subsequent recall.
+.PP
+The shell allows control of the various characters used by the
+history expansion mechanism (see the description of
+.B histchars
+above under
+.BR "Shell Variables" ).
+The shell uses
+the history comment character to mark history timestamps when
+writing the history file.
+.SS Event Designators
+An event designator is a reference to a command line entry in the
+history list.
+Unless the reference is absolute, events are relative to the current
+position in the history list.
+.PP
+.PD 0
+.TP
+.B !
+Start a history substitution, except when followed by a
+.BR blank ,
+newline, carriage return, =
+or ( (when the \fBextglob\fP shell option is enabled using
+the \fBshopt\fP builtin).
+.TP
+.B !\fIn\fR
+Refer to command line
+.IR n .
+.TP
+.B !\-\fIn\fR
+Refer to the current command minus
+.IR n .
+.TP
+.B !!
+Refer to the previous command.  This is a synonym for `!\-1'.
+.TP
+.B !\fIstring\fR
+Refer to the most recent command preceding the current position in the
+history list starting with
+.IR string .
+.TP
+.B !?\fIstring\fR\fB[?]\fR
+Refer to the most recent command preceding the current position in the
+history list containing
+.IR string .
+The trailing \fB?\fP may be omitted if
+.I string
+is followed immediately by a newline.
+If \fIstring\fP is missing, the string from the most recent search is used;
+it is an error if there is no previous search string.
+.TP
+.B \d\s+2^\s-2\u\fIstring1\fP\d\s+2^\s-2\u\fIstring2\fP\d\s+2^\s-2\u
+Quick substitution.  Repeat the previous command, replacing
+.I string1
+with
+.IR string2 .
+Equivalent to
+``!!:s\d\s+2^\s-2\u\fIstring1\fP\d\s+2^\s-2\u\fIstring2\fP\d\s+2^\s-2\u''
+(see \fBModifiers\fP below).
+.TP
+.B !#
+The entire command line typed so far.
+.PD
+.SS Word Designators
+Word designators are used to select desired words from the event.
+A
+.B :
+separates the event specification from the word designator.
+It may be omitted if the word designator begins with a
+.BR ^ ,
+.BR $ ,
+.BR * ,
+.BR \- ,
+or
+.BR % .
+Words are numbered from the beginning of the line,
+with the first word being denoted by 0 (zero).
+Words are inserted into the current line separated by single spaces.
+.PP
+.PD 0
+.TP
+.B 0 (zero)
+The zeroth word.  For the shell, this is the command
+word.
+.TP
+.I n
+The \fIn\fRth word.
+.TP
+.B ^
+The first argument.  That is, word 1.
+.TP
+.B $
+The last word.  This is usually the last argument, but will expand to the
+zeroth word if there is only one word in the line.
+.TP
+.B %
+The first word matched by the most recent `?\fIstring\fR?' search,
+if the search string begins with a character that is part of a word.
+.TP
+.I x\fB\-\fPy
+A range of words; `\-\fIy\fR' abbreviates `0\-\fIy\fR'.
+.TP
+.B *
+All of the words but the zeroth.  This is a synonym
+for `\fI1\-$\fP'.  It is not an error to use
+.B *
+if there is just one
+word in the event; the empty string is returned in that case.
+.TP
+.B x*
+Abbreviates \fIx\-$\fP.
+.TP
+.B x\-
+Abbreviates \fIx\-$\fP like \fBx*\fP, but omits the last word.
+If \fBx\fP is missing, it defaults to 0.
+.PD
+.PP
+If a word designator is supplied without an event specification, the
+previous command is used as the event.
+.SS Modifiers
+After the optional word designator, there may appear a sequence of
+one or more of the following modifiers, each preceded by a `:'.
+These modify, or edit, the word or words selected from the history event.
+.PP
+.PD 0
+.TP
+.B h
+Remove a trailing filename component, leaving only the head.
+.TP
+.B t
+Remove all leading filename components, leaving the tail.
+.TP
+.B r
+Remove a trailing suffix of the form \fI.xxx\fP, leaving the
+basename.
+.TP
+.B e
+Remove all but the trailing suffix.
+.TP
+.B p
+Print the new command but do not execute it.
+.TP
+.B q
+Quote the substituted words, escaping further substitutions.
+.TP
+.B x
+Quote the substituted words as with
+.BR q ,
+but break into words at
+.B blanks
+and newlines.
+The \fBq\fP and \fBx\fP modifiers are mutually exclusive; the last one
+supplied is used.
+.TP
+.B s/\fIold\fP/\fInew\fP/
+Substitute
+.I new
+for the first occurrence of
+.I old
+in the event line.
+Any character may be used as the delimiter in place of /.
+The final delimiter is optional if it is the last character of the
+event line.
+The delimiter may be quoted in
+.I old
+and
+.I new
+with a single backslash.  If & appears in
+.IR new ,
+it is replaced by
+.IR old .
+A single backslash will quote the &.
+If
+.I old
+is null, it is set to the last
+.I old
+substituted, or, if no previous history substitutions took place,
+the last
+.I string
+in a
+.B !?\fIstring\fR\fB[?]\fR
+search.
+If
+.I new
+is null, each matching
+.I old
+is deleted.
+.TP
+.B &
+Repeat the previous substitution.
+.TP
+.B g
+Cause changes to be applied over the entire event line.  This is
+used in conjunction with `\fB:s\fP' (e.g., `\fB:gs/\fIold\fP/\fInew\fP/\fR')
+or `\fB:&\fP'.  If used with
+`\fB:s\fP', any delimiter can be used
+in place of /, and the final delimiter is optional
+if it is the last character of the event line.
+An \fBa\fP may be used as a synonym for \fBg\fP.
+.TP
+.B G
+Apply the following `\fBs\fP' or `\fB&\fP' modifier once to each word
+in the event line.
+.PD
+.SH "SHELL BUILTIN COMMANDS"
+.\" start of bash_builtins
+.zZ
+.PP
+Unless otherwise noted, each builtin command documented in this
+section as accepting options preceded by
+.B \-
+accepts
+.B \-\-
+to signify the end of the options.
+The \fB:\fP, \fBtrue\fP, \fBfalse\fP, and \fBtest\fP/\fB[\fP builtins
+do not accept options and do not treat \fB\-\-\fP specially.
+The \fBexit\fP, \fBlogout\fP, \fBreturn\fP,
+\fBbreak\fP, \fBcontinue\fP, \fBlet\fP,
+and \fBshift\fP builtins accept and process arguments beginning with
+\fB\-\fP without requiring \fB\-\-\fP.
+Other builtins that accept arguments but are not specified as accepting
+options interpret arguments beginning with \fB\-\fP as invalid options and
+require \fB\-\-\fP to prevent this interpretation.
+.sp .5
+.PD 0
+.TP
+\fB:\fP [\fIarguments\fP]
+.PD
+No effect; the command does nothing beyond expanding
+.I arguments
+and performing any specified
+redirections.
+The return status is zero.
+.TP
+\fB .\| \fP \fIfilename\fP [\fIarguments\fP]
+.PD 0
+.TP
+\fBsource\fP \fIfilename\fP [\fIarguments\fP]
+.PD
+Read and execute commands from
+.I filename
+in the current
+shell environment and return the exit status of the last command
+executed from
+.IR filename .
+If
+.I filename
+does not contain a slash, filenames in
+.SM
+.B PATH
+are used to find the directory containing
+.IR filename .
+The file searched for in
+.SM
+.B PATH
+need not be executable.
+When \fBbash\fP is not in \fIposix mode\fP, the current directory is
+searched if no file is found in
+.SM
+.BR PATH .
+If the
+.B sourcepath
+option to the
+.B shopt
+builtin command is turned off, the
+.SM
+.B PATH
+is not searched.
+If any \fIarguments\fP are supplied, they become the positional
+parameters when \fIfilename\fP is executed.  Otherwise the positional
+parameters are unchanged.
+If the \fB\-T\fP option is enabled, \fBsource\fP inherits any trap on
+\fBDEBUG\fP; if it is not, any \fBDEBUG\fP trap string is saved and
+restored around the call to \fBsource\fP, and \fBsource\fP unsets the
+\fBDEBUG\fP trap while it executes.
+If \fB\-T\fP is not set, and the sourced file changes
+the \fBDEBUG\fP trap, the new value is retained when \fBsource\fP completes.
+The return status is the status of the last command exited within
+the script (0 if no commands are executed), and false if
+.I filename
+is not found or cannot be read.
+.TP
+\fBalias\fP [\fB\-p\fP] [\fIname\fP[=\fIvalue\fP] ...]
+\fBAlias\fP with no arguments or with the
+.B \-p
+option prints the list of aliases in the form
+\fBalias\fP \fIname\fP=\fIvalue\fP on standard output.
+When arguments are supplied, an alias is defined for
+each \fIname\fP whose \fIvalue\fP is given.
+A trailing space in \fIvalue\fP causes the next word to be
+checked for alias substitution when the alias is expanded.
+For each \fIname\fP in the argument list for which no \fIvalue\fP
+is supplied, the name and value of the alias is printed.
+\fBAlias\fP returns true unless a \fIname\fP is given for which
+no alias has been defined.
+.TP
+\fBbg\fP [\fIjobspec\fP ...]
+Resume each suspended job \fIjobspec\fP in the background, as if it
+had been started with
+.BR & .
+If
+.I jobspec
+is not present, the shell's notion of the \fIcurrent job\fP is used.
+.B bg
+.I jobspec
+returns 0 unless run when job control is disabled or, when run with
+job control enabled, any specified \fIjobspec\fP was not found
+or was started without job control.
+.TP
+\fBbind\fP [\fB\-m\fP \fIkeymap\fP] [\fB\-lpsvPSVX\fP]
+.PD 0
+.TP
+\fBbind\fP [\fB\-m\fP \fIkeymap\fP] [\fB\-q\fP \fIfunction\fP] [\fB\-u\fP \fIfunction\fP] [\fB\-r\fP \fIkeyseq\fP]
+.TP
+\fBbind\fP [\fB\-m\fP \fIkeymap\fP] \fB\-f\fP \fIfilename\fP
+.TP
+\fBbind\fP [\fB\-m\fP \fIkeymap\fP] \fB\-x\fP \fIkeyseq\fP:\fIshell\-command\fP
+.TP
+\fBbind\fP [\fB\-m\fP \fIkeymap\fP] \fIkeyseq\fP:\fIfunction\-name\fP
+.TP
+\fBbind\fP [\fB\-m\fP \fIkeymap\fP] \fIkeyseq\fP:\fIreadline\-command\fP
+.PD
+Display current
+.B readline
+key and function bindings, bind a key sequence to a
+.B readline
+function or macro, or set a
+.B readline
+variable.
+Each non-option argument is a command as it would appear in
+.IR .inputrc ,
+but each binding or command must be passed as a separate argument;
+e.g., '"\eC\-x\eC\-r": re\-read\-init\-file'.
+Options, if supplied, have the following meanings:
+.RS
+.PD 0
+.TP
+.B \-m \fIkeymap\fP
+Use
+.I keymap
+as the keymap to be affected by the subsequent bindings.
+Acceptable
+.I keymap
+names are
+\fIemacs, emacs\-standard, emacs\-meta, emacs\-ctlx, vi,
+vi\-move, vi\-command\fP, and
+.IR vi\-insert .
+\fIvi\fP is equivalent to \fIvi\-command\fP (\fIvi\-move\fP is also
+a synonym); \fIemacs\fP is
+equivalent to \fIemacs\-standard\fP.
+.TP
+.B \-l
+List the names of all \fBreadline\fP functions.
+.TP
+.B \-p
+Display \fBreadline\fP function names and bindings in such a way
+that they can be re-read.
+.TP
+.B \-P
+List current \fBreadline\fP function names and bindings.
+.TP
+.B \-s
+Display \fBreadline\fP key sequences bound to macros and the strings
+they output in such a way that they can be re-read.
+.TP
+.B \-S
+Display \fBreadline\fP key sequences bound to macros and the strings
+they output.
+.TP
+.B \-v
+Display \fBreadline\fP variable names and values in such a way that they
+can be re-read.
+.TP
+.B \-V
+List current \fBreadline\fP variable names and values.
+.TP
+.B \-f \fIfilename\fP
+Read key bindings from \fIfilename\fP.
+.TP
+.B \-q \fIfunction\fP
+Query about which keys invoke the named \fIfunction\fP.
+.TP
+.B \-u \fIfunction\fP
+Unbind all keys bound to the named \fIfunction\fP.
+.TP
+.B \-r \fIkeyseq\fP
+Remove any current binding for \fIkeyseq\fP.
+.TP
+.B \-x \fIkeyseq\fP:\fIshell\-command\fP
+Cause \fIshell\-command\fP to be executed whenever \fIkeyseq\fP is
+entered.
+When \fIshell\-command\fP is executed, the shell sets the
+.SM
+.B READLINE_LINE
+variable to the contents of the \fBreadline\fP line buffer and the
+.SM
+.B READLINE_POINT
+and
+.SM
+.B READLINE_MARK
+variables to the current location of the insertion point and the saved
+insertion point (the mark), respectively.
+If the executed command changes the value of any of
+.SM
+.BR READLINE_LINE ,
+.SM
+.BR READLINE_POINT ,
+or
+.SM
+.BR READLINE_MARK ,
+those new values will be reflected in the editing state.
+.TP
+.B \-X
+List all key sequences bound to shell commands and the associated commands
+in a format that can be reused as input.
+.PD
+.PP
+The return value is 0 unless an unrecognized option is given or an
+error occurred.
+.RE
+.TP
+\fBbreak\fP [\fIn\fP]
+Exit from within a
+.BR for ,
+.BR while ,
+.BR until ,
+or
+.B select
+loop.  If \fIn\fP is specified, break \fIn\fP levels.
+.I n
+must be \(>= 1.  If
+.I n
+is greater than the number of enclosing loops, all enclosing loops
+are exited.
+The return value is 0 unless \fIn\fP is not greater than or equal to 1.
+.TP
+\fBbuiltin\fP \fIshell\-builtin\fP [\fIarguments\fP]
+Execute the specified shell builtin, passing it
+.IR arguments ,
+and return its exit status.
+This is useful when defining a
+function whose name is the same as a shell builtin,
+retaining the functionality of the builtin within the function.
+The \fBcd\fP builtin is commonly redefined this way.
+The return status is false if
+.I shell\-builtin
+is not a shell builtin command.
+.TP
+\fBcaller\fP [\fIexpr\fP]
+Returns the context of any active subroutine call (a shell function or
+a script executed with the \fB.\fP or \fBsource\fP builtins).
+Without \fIexpr\fP, \fBcaller\fP displays the line number and source
+filename of the current subroutine call.
+If a non-negative integer is supplied as \fIexpr\fP, \fBcaller\fP
+displays the line number, subroutine name, and source file corresponding
+to that position in the current execution call stack.  This extra
+information may be used, for example, to print a stack trace.  The
+current frame is frame 0.
+The return value is 0 unless the shell is not executing a subroutine
+call or \fIexpr\fP does not correspond to a valid position in the
+call stack.
+.TP
+\fBcd\fP [\fB\-L\fP|[\fB\-P\fP [\fB\-e\fP]] [\-@]] [\fIdir\fP]
+Change the current directory to \fIdir\fP.
+if \fIdir\fP is not supplied, the value of the
+.SM
+.B HOME
+shell variable is the default.
+Any additional arguments following \fIdir\fP are ignored.
+The variable
+.SM
+.B CDPATH
+defines the search path for the directory containing
+.IR dir :
+each directory name in
+.SM
+.B CDPATH
+is searched for \fIdir\fP.
+Alternative directory names in
+.SM
+.B CDPATH
+are separated by a colon (:).  A null directory name in
+.SM
+.B CDPATH
+is the same as the current directory, i.e., ``\fB.\fP''.  If
+.I dir
+begins with a slash (/),
+then
+.SM
+.B CDPATH
+is not used.  The
+.B \-P
+option causes \fBcd\fP to use the physical directory structure
+by resolving symbolic links while traversing \fIdir\fP and
+before processing instances of \fI..\fP in \fIdir\fP (see also the
+.B \-P
+option to the
+.B set
+builtin command); the
+.B \-L
+option forces symbolic links to be followed by resolving the link
+after processing instances of \fI..\fP in \fIdir\fP.
+If \fI..\fP appears in \fIdir\fP, it is processed by removing the
+immediately previous pathname component from \fIdir\fP, back to a slash
+or the beginning of \fIdir\fP.
+If the
+.B \-e
+option is supplied with
+.BR \-P ,
+and the current working directory cannot be successfully determined
+after a successful directory change, \fBcd\fP will return an unsuccessful
+status.
+On systems that support it, the \fB\-@\fP option presents the extended
+attributes associated with a file as a directory.
+An argument of
+.B \-
+is converted to
+.SM
+.B $OLDPWD
+before the directory change is attempted.
+If a non-empty directory name from
+.SM
+.B CDPATH
+is used, or if
+\fB\-\fP is the first argument, and the directory change is
+successful, the absolute pathname of the new working directory is
+written to the standard output.
+The return value is true if the directory was successfully changed;
+false otherwise.
+.TP
+\fBcommand\fP [\fB\-pVv\fP] \fIcommand\fP [\fIarg\fP ...]
+Run
+.I command
+with
+.I args
+suppressing the normal shell function lookup.
+Only builtin commands or commands found in the
+.SM
+.B PATH
+are executed.  If the
+.B \-p
+option is given, the search for
+.I command
+is performed using a default value for
+.SM
+.B PATH
+that is guaranteed to find all of the standard utilities.
+If either the
+.B \-V
+or
+.B \-v
+option is supplied, a description of
+.I command
+is printed.  The
+.B \-v
+option causes a single word indicating the command or filename
+used to invoke
+.I command
+to be displayed; the
+.B \-V
+option produces a more verbose description.
+If the
+.B \-V
+or
+.B \-v
+option is supplied, the exit status is 0 if
+.I command
+was found, and 1 if not.  If neither option is supplied and
+an error occurred or
+.I command
+cannot be found, the exit status is 127.  Otherwise, the exit status of the
+.B command
+builtin is the exit status of
+.IR command .
+.TP
+\fBcompgen\fP [\fIoption\fP] [\fIword\fP]
+Generate possible completion matches for \fIword\fP according to
+the \fIoption\fPs, which may be any option accepted by the
+.B complete
+builtin with the exception of \fB\-p\fP and \fB\-r\fP, and write
+the matches to the standard output.
+When using the \fB\-F\fP or \fB\-C\fP options, the various shell variables
+set by the programmable completion facilities, while available, will not
+have useful values.
+.sp 1
+The matches will be generated in the same way as if the programmable
+completion code had generated them directly from a completion specification
+with the same flags.
+If \fIword\fP is specified, only those completions matching \fIword\fP
+will be displayed.
+.sp 1
+The return value is true unless an invalid option is supplied, or no
+matches were generated.
+.TP
+\fBcomplete\fP [\fB\-abcdefgjksuv\fP] [\fB\-o\fP \fIcomp-option\fP] [\fB\-DEI\fP] [\fB\-A\fP \fIaction\fP] [\fB\-G\fP \fIglobpat\fP] [\fB\-W\fP \fIwordlist\fP]
+.br
+[\fB\-F\fP \fIfunction\fP] [\fB\-C\fP \fIcommand\fP] [\fB\-X\fP \fIfilterpat\fP] [\fB\-P\fP \fIprefix\fP] [\fB\-S\fP \fIsuffix\fP] \fIname\fP [\fIname ...\fP]
+.PD 0
+.TP
+\fBcomplete\fP \fB\-pr\fP [\fB\-DEI\fP] [\fIname\fP ...]
+.PD
+Specify how arguments to each \fIname\fP should be completed.
+If the \fB\-p\fP option is supplied, or if no options are supplied,
+existing completion specifications are printed in a way that allows
+them to be reused as input.
+The \fB\-r\fP option removes a completion specification for
+each \fIname\fP, or, if no \fIname\fPs are supplied, all
+completion specifications.
+The \fB\-D\fP option indicates that other supplied options and actions should
+apply to the ``default'' command completion; that is, completion attempted
+on a command for which no completion has previously been defined.
+The \fB\-E\fP option indicates that other supplied options and actions should
+apply to ``empty'' command completion; that is, completion attempted on a
+blank line.
+The \fB\-I\fP option indicates that other supplied options and actions should
+apply to completion on the initial non-assignment word on the line, or after
+a command delimiter such as \fB;\fP or \fB|\fP, which is usually command
+name completion.
+If multiple options are supplied, the \fB\-D\fP option takes precedence
+over \fB\-E\fP, and both take precedence over \fB\-I\fP.
+If any of \fB\-D\fP, \fB\-E\fP, or \fB\-I\fP are supplied, any other
+\fIname\fP arguments are ignored; these completions only apply to the case
+specified by the option.
+.sp 1
+The process of applying these completion specifications when word completion
+is attempted is described above under \fBProgrammable Completion\fP.
+.sp 1
+Other options, if specified, have the following meanings.
+The arguments to the \fB\-G\fP, \fB\-W\fP, and \fB\-X\fP options
+(and, if necessary, the \fB\-P\fP and \fB\-S\fP options)
+should be quoted to protect them from expansion before the
+.B complete
+builtin is invoked.
+.RS
+.PD 0
+.TP 8
+\fB\-o\fP \fIcomp-option\fP
+The \fIcomp-option\fP controls several aspects of the compspec's behavior
+beyond the simple generation of completions.
+\fIcomp-option\fP may be one of:
+.RS
+.TP 8
+.B bashdefault
+Perform the rest of the default \fBbash\fP completions if the compspec
+generates no matches.
+.TP 8
+.B default
+Use readline's default filename completion if the compspec generates
+no matches.
+.TP 8
+.B dirnames
+Perform directory name completion if the compspec generates no matches.
+.TP 8
+.B filenames
+Tell readline that the compspec generates filenames, so it can perform any
+filename\-specific processing (like adding a slash to directory names,
+quoting special characters, or suppressing trailing spaces).
+Intended to be used with shell functions.
+.TP 8
+.B noquote
+Tell readline not to quote the completed words if they are filenames
+(quoting filenames is the default).
+.TP 8
+.B nosort
+Tell readline not to sort the list of possible completions alphabetically.
+.TP 8
+.B nospace
+Tell readline not to append a space (the default) to words completed at
+the end of the line.
+.TP 8
+.B plusdirs
+After any matches defined by the compspec are generated,
+directory name completion is attempted and any
+matches are added to the results of the other actions.
+.RE
+.TP 8
+\fB\-A\fP \fIaction\fP
+The \fIaction\fP may be one of the following to generate a list of possible
+completions:
+.RS
+.TP 8
+.B alias
+Alias names.  May also be specified as \fB\-a\fP.
+.TP 8
+.B arrayvar
+Array variable names.
+.TP 8
+.B binding
+\fBReadline\fP key binding names.
+.TP 8
+.B builtin
+Names of shell builtin commands.  May also be specified as \fB\-b\fP.
+.TP 8
+.B command
+Command names.  May also be specified as \fB\-c\fP.
+.TP 8
+.B directory
+Directory names.  May also be specified as \fB\-d\fP.
+.TP 8
+.B disabled
+Names of disabled shell builtins.
+.TP 8
+.B enabled
+Names of enabled shell builtins.
+.TP 8
+.B export
+Names of exported shell variables.  May also be specified as \fB\-e\fP.
+.TP 8
+.B file
+File names.  May also be specified as \fB\-f\fP.
+.TP 8
+.B function
+Names of shell functions.
+.TP 8
+.B group
+Group names.  May also be specified as \fB\-g\fP.
+.TP 8
+.B helptopic
+Help topics as accepted by the \fBhelp\fP builtin.
+.TP 8
+.B hostname
+Hostnames, as taken from the file specified by the
+.SM
+.B HOSTFILE
+shell variable.
+.TP 8
+.B job
+Job names, if job control is active.  May also be specified as \fB\-j\fP.
+.TP 8
+.B keyword
+Shell reserved words.  May also be specified as \fB\-k\fP.
+.TP 8
+.B running
+Names of running jobs, if job control is active.
+.TP 8
+.B service
+Service names.  May also be specified as \fB\-s\fP.
+.TP 8
+.B setopt
+Valid arguments for the \fB\-o\fP option to the \fBset\fP builtin.
+.TP 8
+.B shopt
+Shell option names as accepted by the \fBshopt\fP builtin.
+.TP 8
+.B signal
+Signal names.
+.TP 8
+.B stopped
+Names of stopped jobs, if job control is active.
+.TP 8
+.B user
+User names.  May also be specified as \fB\-u\fP.
+.TP 8
+.B variable
+Names of all shell variables.  May also be specified as \fB\-v\fP.
+.RE
+.TP 8
+\fB\-C\fP \fIcommand\fP
+\fIcommand\fP is executed in a subshell environment, and its output is
+used as the possible completions.
+.TP 8
+\fB\-F\fP \fIfunction\fP
+The shell function \fIfunction\fP is executed in the current shell
+environment.
+When the function is executed,
+the first argument (\fB$1\fP) is the name of the command whose arguments are
+being completed,
+the second argument (\fB$2\fP) is the word being completed,
+and the third argument (\fB$3\fP) is the word preceding the word being
+completed on the current command line.
+When it finishes, the possible completions are retrieved from the value
+of the
+.SM
+.B COMPREPLY
+array variable.
+.TP 8
+\fB\-G\fP \fIglobpat\fP
+The pathname expansion pattern \fIglobpat\fP is expanded to generate
+the possible completions.
+.TP 8
+\fB\-P\fP \fIprefix\fP
+\fIprefix\fP is added at the beginning of each possible completion
+after all other options have been applied.
+.TP 8
+\fB\-S\fP \fIsuffix\fP
+\fIsuffix\fP is appended to each possible completion
+after all other options have been applied.
+.TP 8
+\fB\-W\fP \fIwordlist\fP
+The \fIwordlist\fP is split using the characters in the
+.SM
+.B IFS
+special variable as delimiters, and each resultant word is expanded.
+Shell quoting is honored within \fIwordlist\fP,
+in order to provide a
+mechanism for the words to contain shell metacharacters or characters
+in the value of
+.SM
+.BR IFS .
+The possible completions are the members of the resultant list which
+match the word being completed.
+.TP 8
+\fB\-X\fP \fIfilterpat\fP
+\fIfilterpat\fP is a pattern as used for pathname expansion.
+It is applied to the list of possible completions generated by the
+preceding options and arguments, and each completion matching
+\fIfilterpat\fP is removed from the list.
+A leading \fB!\fP in \fIfilterpat\fP negates the pattern; in this
+case, any completion not matching \fIfilterpat\fP is removed.
+.PD
+.PP
+The return value is true unless an invalid option is supplied, an option
+other than \fB\-p\fP or \fB\-r\fP is supplied without a \fIname\fP
+argument, an attempt is made to remove a completion specification for
+a \fIname\fP for which no specification exists, or
+an error occurs adding a completion specification.
+.RE
+.TP
+\fBcompopt\fP [\fB\-o\fP \fIoption\fP] [\fB\-DEI\fP] [\fB+o\fP \fIoption\fP] [\fIname\fP]
+Modify completion options for each \fIname\fP according to the
+\fIoption\fPs, or for the
+currently-executing completion if no \fIname\fPs are supplied.
+If no \fIoption\fPs are given, display the completion options for each
+\fIname\fP or the current completion.
+The possible values of \fIoption\fP are those valid for the \fBcomplete\fP
+builtin described above.
+The \fB\-D\fP option indicates that other supplied options should
+apply to the ``default'' command completion; that is, completion attempted
+on a command for which no completion has previously been defined.
+The \fB\-E\fP option indicates that other supplied options should
+apply to ``empty'' command completion; that is, completion attempted on a
+blank line.
+The \fB\-I\fP option indicates that other supplied options should
+apply to completion on the initial non-assignment word on the line,
+or after a command delimiter such as \fB;\fP or \fB|\fP, which is usually
+command name completion.
+.sp 1
+The return value is true unless an invalid option is supplied, an attempt
+is made to modify the options for a \fIname\fP for which no completion
+specification exists, or an output error occurs.
+.TP
+\fBcontinue\fP [\fIn\fP]
+Resume the next iteration of the enclosing
+.BR for ,
+.BR while ,
+.BR until ,
+or
+.B select
+loop.
+If
+.I n
+is specified, resume at the \fIn\fPth enclosing loop.
+.I n
+must be \(>= 1.  If
+.I n
+is greater than the number of enclosing loops, the last enclosing loop
+(the ``top-level'' loop) is resumed.
+The return value is 0 unless \fIn\fP is not greater than or equal to 1.
+.TP
+\fBdeclare\fP [\fB\-aAfFgiIlnrtux\fP] [\fB\-p\fP] [\fIname\fP[=\fIvalue\fP] ...]
+.PD 0
+.TP
+\fBtypeset\fP [\fB\-aAfFgiIlnrtux\fP] [\fB\-p\fP] [\fIname\fP[=\fIvalue\fP] ...]
+.PD
+Declare variables and/or give them attributes.
+If no \fIname\fPs are given then display the values of variables.
+The
+.B \-p
+option will display the attributes and values of each
+.IR name .
+When
+.B \-p
+is used with \fIname\fP arguments, additional options,
+other than \fB\-f\fP and \fB\-F\fP, are ignored.
+When
+.B \-p
+is supplied without \fIname\fP arguments, it will display the attributes
+and values of all variables having the attributes specified by the
+additional options.
+If no other options are supplied with \fB\-p\fP, \fBdeclare\fP will display
+the attributes and values of all shell variables.  The \fB\-f\fP option
+will restrict the display to shell functions.
+The
+.B \-F
+option inhibits the display of function definitions; only the
+function name and attributes are printed.
+If the \fBextdebug\fP shell option is enabled using \fBshopt\fP,
+the source file name and line number where each \fIname\fP
+is defined are displayed as well.  The
+.B \-F
+option implies
+.BR \-f .
+The
+.B \-g
+option forces variables to be created or modified at the global scope,
+even when \fBdeclare\fP is executed in a shell function.
+It is ignored in all other cases.
+The
+.B \-I
+option causes local variables to inherit the attributes
+(except the \fInameref\fP attribute) 
+and value of any existing variable with the same
+\fIname\fP at a surrounding scope.
+If there is no existing variable, the local variable is initially unset.
+The following options can
+be used to restrict output to variables with the specified attribute or
+to give variables attributes:
+.RS
+.PD 0
+.TP
+.B \-a
+Each \fIname\fP is an indexed array variable (see
+.B Arrays
+above).
+.TP
+.B \-A
+Each \fIname\fP is an associative array variable (see
+.B Arrays
+above).
+.TP
+.B \-f
+Use function names only.
+.TP
+.B \-i
+The variable is treated as an integer; arithmetic evaluation (see
+.SM
+.B "ARITHMETIC EVALUATION"
+above) is performed when the variable is assigned a value.
+.TP
+.B \-l
+When the variable is assigned a value, all upper-case characters are
+converted to lower-case.
+The upper-case attribute is disabled.
+.TP
+.B \-n
+Give each \fIname\fP the \fInameref\fP attribute, making
+it a name reference to another variable.
+That other variable is defined by the value of \fIname\fP.
+All references, assignments, and attribute modifications
+to \fIname\fP, except those using or changing the
+\fB\-n\fP attribute itself, are performed on the variable referenced by
+\fIname\fP's value.
+The nameref attribute cannot be applied to array variables.
+.TP
+.B \-r
+Make \fIname\fPs readonly.  These names cannot then be assigned values
+by subsequent assignment statements or unset.
+.TP
+.B \-t
+Give each \fIname\fP the \fItrace\fP attribute.
+Traced functions inherit the \fBDEBUG\fP and \fBRETURN\fP traps from
+the calling shell.
+The trace attribute has no special meaning for variables.
+.TP
+.B \-u
+When the variable is assigned a value, all lower-case characters are
+converted to upper-case.
+The lower-case attribute is disabled.
+.TP
+.B \-x
+Mark \fIname\fPs for export to subsequent commands via the environment.
+.PD
+.PP
+Using `+' instead of `\-'
+turns off the attribute instead,
+with the exceptions that \fB+a\fP and \fB+A\fP
+may not be used to destroy array variables and \fB+r\fP will not
+remove the readonly attribute.
+When used in a function,
+.B declare
+and
+.B typeset
+make each
+\fIname\fP local, as with the
+.B local
+command,
+unless the \fB\-g\fP option is supplied.
+If a variable name is followed by =\fIvalue\fP, the value of
+the variable is set to \fIvalue\fP.
+When using \fB\-a\fP or \fB\-A\fP and the compound assignment syntax to
+create array variables, additional attributes do not take effect until
+subsequent assignments.
+The return value is 0 unless an invalid option is encountered,
+an attempt is made to define a function using
+.if n ``\-f foo=bar'',
+.if t \f(CW\-f foo=bar\fP,
+an attempt is made to assign a value to a readonly variable,
+an attempt is made to assign a value to an array variable without
+using the compound assignment syntax (see
+.B Arrays
+above), one of the \fInames\fP is not a valid shell variable name,
+an attempt is made to turn off readonly status for a readonly variable,
+an attempt is made to turn off array status for an array variable,
+or an attempt is made to display a non-existent function with \fB\-f\fP.
+.RE
+.TP
+.B dirs [\fB\-clpv\fP] [+\fIn\fP] [\-\fIn\fP]
+Without options, displays the list of currently remembered directories.
+The default display is on a single line with directory names separated
+by spaces.
+Directories are added to the list with the
+.B pushd
+command; the
+.B popd
+command removes entries from the list.
+The current directory is always the first directory in the stack.
+.RS
+.PD 0
+.TP
+.B \-c
+Clears the directory stack by deleting all of the entries.
+.TP
+.B \-l
+Produces a listing using full pathnames;
+the default listing format uses a tilde to denote the home directory.
+.TP
+.B \-p
+Print the directory stack with one entry per line.
+.TP
+.B \-v
+Print the directory stack with one entry per line,
+prefixing each entry with its index in the stack.
+.TP
+\fB+\fP\fIn\fP
+Displays the \fIn\fPth entry counting from the left of the list
+shown by
+.B dirs
+when invoked without options, starting with zero.
+.TP
+\fB\-\fP\fIn\fP
+Displays the \fIn\fPth entry counting from the right of the list
+shown by
+.B dirs
+when invoked without options, starting with zero.
+.PD
+.PP
+The return value is 0 unless an
+invalid option is supplied or \fIn\fP indexes beyond the end
+of the directory stack.
+.RE
+.TP
+\fBdisown\fP [\fB\-ar\fP] [\fB\-h\fP] [\fIjobspec\fP ... | \fIpid\fP ... ]
+Without options, remove each
+.I jobspec
+from the table of active jobs.
+If
+.I jobspec
+is not present, and neither the \fB\-a\fP nor the \fB\-r\fP option
+is supplied, the \fIcurrent job\fP is used.
+If the \fB\-h\fP option is given, each
+.I jobspec
+is not removed from the table, but is marked so that
+.SM
+.B SIGHUP
+is not sent to the job if the shell receives a
+.SM
+.BR SIGHUP .
+If no
+.I jobspec
+is supplied, the
+.B \-a
+option means to remove or mark all jobs; the
+.B \-r
+option without a
+.I jobspec
+argument restricts operation to running jobs.
+The return value is 0 unless a
+.I jobspec
+does not specify a valid job.
+.TP
+\fBecho\fP [\fB\-neE\fP] [\fIarg\fP ...]
+Output the \fIarg\fPs, separated by spaces, followed by a newline.
+The return status is 0 unless a write error occurs.
+If \fB\-n\fP is specified, the trailing newline is
+suppressed.  If the \fB\-e\fP option is given, interpretation of
+the following backslash-escaped characters is enabled.  The
+.B \-E
+option disables the interpretation of these escape characters,
+even on systems where they are interpreted by default.
+The \fBxpg_echo\fP shell option may be used to
+dynamically determine whether or not \fBecho\fP expands these
+escape characters by default.
+.B echo
+does not interpret \fB\-\-\fP to mean the end of options.
+.B echo
+interprets the following escape sequences:
+.RS
+.PD 0
+.TP
+.B \ea
+alert (bell)
+.TP
+.B \eb
+backspace
+.TP
+.B \ec
+suppress further output
+.TP
+.B \ee
+.TP
+.B \eE
+an escape character
+.TP
+.B \ef
+form feed
+.TP
+.B \en
+new line
+.TP
+.B \er
+carriage return
+.TP
+.B \et
+horizontal tab
+.TP
+.B \ev
+vertical tab
+.TP
+.B \e\e
+backslash
+.TP
+.B \e0\fInnn\fP
+the eight-bit character whose value is the octal value \fInnn\fP
+(zero to three octal digits)
+.TP
+.B \ex\fIHH\fP
+the eight-bit character whose value is the hexadecimal value \fIHH\fP
+(one or two hex digits)
+.TP
+.B \eu\fIHHHH\fP
+the Unicode (ISO/IEC 10646) character whose value is the hexadecimal value
+\fIHHHH\fP (one to four hex digits)
+.TP
+.B \eU\fIHHHHHHHH\fP
+the Unicode (ISO/IEC 10646) character whose value is the hexadecimal value
+\fIHHHHHHHH\fP (one to eight hex digits)
+.PD
+.RE
+.TP
+\fBenable\fP [\fB\-a\fP] [\fB\-dnps\fP] [\fB\-f\fP \fIfilename\fP] [\fIname\fP ...]
+Enable and disable builtin shell commands.
+Disabling a builtin allows a disk command which has the same name
+as a shell builtin to be executed without specifying a full pathname,
+even though the shell normally searches for builtins before disk commands.
+If \fB\-n\fP is used, each \fIname\fP
+is disabled; otherwise,
+\fInames\fP are enabled.  For example, to use the
+.B test
+binary found via the
+.SM
+.B PATH
+instead of the shell builtin version, run
+.if t \f(CWenable -n test\fP.
+.if n ``enable -n test''.
+The
+.B \-f
+option means to load the new builtin command
+.I name
+from shared object
+.IR filename ,
+on systems that support dynamic loading.  The
+.B \-d
+option will delete a builtin previously loaded with
+.BR \-f .
+If no \fIname\fP arguments are given, or if the
+.B \-p
+option is supplied, a list of shell builtins is printed.
+With no other option arguments, the list consists of all enabled
+shell builtins.
+If \fB\-n\fP is supplied, only disabled builtins are printed.
+If \fB\-a\fP is supplied, the list printed includes all builtins, with an
+indication of whether or not each is enabled.
+If \fB\-s\fP is supplied, the output is restricted to the POSIX
+\fIspecial\fP builtins.
+The return value is 0 unless a
+.I name
+is not a shell builtin or there is an error loading a new builtin
+from a shared object.
+.TP
+\fBeval\fP [\fIarg\fP ...]
+The \fIarg\fPs are read and concatenated together into a single
+command.  This command is then read and executed by the shell, and
+its exit status is returned as the value of
+.BR eval .
+If there are no
+.IR args ,
+or only null arguments,
+.B eval
+returns 0.
+.TP
+\fBexec\fP [\fB\-cl\fP] [\fB\-a\fP \fIname\fP] [\fIcommand\fP [\fIarguments\fP]]
+If
+.I command
+is specified, it replaces the shell.
+No new process is created.  The
+.I arguments
+become the arguments to \fIcommand\fP.
+If the
+.B \-l
+option is supplied,
+the shell places a dash at the beginning of the zeroth argument passed to
+.IR command .
+This is what
+.IR login (1)
+does.  The
+.B \-c
+option causes
+.I command
+to be executed with an empty environment.  If
+.B \-a
+is supplied, the shell passes
+.I name
+as the zeroth argument to the executed command.
+If
+.I command
+cannot be executed for some reason, a non-interactive shell exits,
+unless the
+.B execfail
+shell option
+is enabled.  In that case, it returns failure.
+An interactive shell returns failure if the file cannot be executed.
+A subshell exits unconditionally if \fBexec\fP fails.
+If
+.I command
+is not specified, any redirections take effect in the current shell,
+and the return status is 0.  If there is a redirection error, the
+return status is 1.
+.TP
+\fBexit\fP [\fIn\fP]
+Cause the shell to exit
+with a status of \fIn\fP.  If
+.I n
+is omitted, the exit status
+is that of the last command executed.
+A trap on
+.SM
+.B EXIT
+is executed before the shell terminates.
+.TP
+\fBexport\fP [\fB\-fn\fP\^] [\fIname\fP[=\fIword\fP]] ...
+.PD 0
+.TP
+.B export \-p
+.PD
+The supplied
+.I names
+are marked for automatic export to the environment of
+subsequently executed commands.  If the
+.B \-f
+option is given, the
+.I names
+refer to functions.
+If no
+.I names
+are given, or if the
+.B \-p
+option is supplied, a list
+of names of all exported variables is printed.
+The
+.B \-n
+option causes the export property to be removed from each
+\fIname\fP.
+If a variable name is followed by =\fIword\fP, the value of
+the variable is set to \fIword\fP.
+.B export
+returns an exit status of 0 unless an invalid option is
+encountered,
+one of the \fInames\fP is not a valid shell variable name, or
+.B \-f
+is supplied with a
+.I name
+that is not a function.
+.TP
+\fBfc\fP [\fB\-e\fP \fIename\fP] [\fB\-lnr\fP] [\fIfirst\fP] [\fIlast\fP]
+.PD 0
+.TP
+\fBfc\fP \fB\-s\fP [\fIpat\fP=\fIrep\fP] [\fIcmd\fP]
+.PD
+The first form selects a range of commands from
+.I first
+to
+.I last
+from the history list and displays or edits and re-executes them.
+.I First
+and
+.I last
+may be specified as a string (to locate the last command beginning
+with that string) or as a number (an index into the history list,
+where a negative number is used as an offset from the current
+command number).
+When listing, a \fIfirst\fP or \fIlast\fP of
+0 is equivalent to \-1 and \-0 is equivalent to the current
+command (usually the \fBfc\fP command); otherwise 0 is equivalent to \-1
+and \-0 is invalid.
+If
+.I last
+is not specified, it is set to
+the current command for listing (so that
+.if n ``fc \-l \-10''
+.if t \f(CWfc \-l \-10\fP
+prints the last 10 commands) and to
+.I first
+otherwise.
+If
+.I first
+is not specified, it is set to the previous
+command for editing and \-16 for listing.
+.sp 1
+The
+.B \-n
+option suppresses
+the command numbers when listing.  The
+.B \-r
+option reverses the order of
+the commands.  If the
+.B \-l
+option is given,
+the commands are listed on
+standard output.  Otherwise, the editor given by
+.I ename
+is invoked
+on a file containing those commands.  If
+.I ename
+is not given, the
+value of the
+.SM
+.B FCEDIT
+variable is used, and
+the value of
+.SM
+.B EDITOR
+if
+.SM
+.B FCEDIT
+is not set.  If neither variable is set,
+.FN vi
+is used.  When editing is complete, the edited commands are
+echoed and executed.
+.sp 1
+In the second form, \fIcommand\fP is re-executed after each instance
+of \fIpat\fP is replaced by \fIrep\fP.
+\fICommand\fP is interpreted the same as \fIfirst\fP above.
+A useful alias to use with this is
+.if n ``r="fc -s"'',
+.if t \f(CWr='fc \-s'\fP,
+so that typing
+.if n ``r cc''
+.if t \f(CWr cc\fP
+runs the last command beginning with
+.if n ``cc''
+.if t \f(CWcc\fP
+and typing
+.if n ``r''
+.if t \f(CWr\fP
+re-executes the last command.
+.sp 1
+If the first form is used, the return value is 0 unless an invalid
+option is encountered or
+.I first
+or
+.I last
+specify history lines out of range.
+If the
+.B \-e
+option is supplied, the return value is the value of the last
+command executed or failure if an error occurs with the temporary
+file of commands.  If the second form is used, the return status
+is that of the command re-executed, unless
+.I cmd
+does not specify a valid history line, in which case
+.B fc
+returns failure.
+.TP
+\fBfg\fP [\fIjobspec\fP]
+Resume
+.I jobspec
+in the foreground, and make it the current job.
+If
+.I jobspec
+is not present, the shell's notion of the \fIcurrent job\fP is used.
+The return value is that of the command placed into the foreground,
+or failure if run when job control is disabled or, when run with
+job control enabled, if
+.I jobspec
+does not specify a valid job or
+.I jobspec
+specifies a job that was started without job control.
+.TP
+\fBgetopts\fP \fIoptstring\fP \fIname\fP [\fIarg ...\fP]
+.B getopts
+is used by shell procedures to parse positional parameters.
+.I optstring
+contains the option characters to be recognized; if a character
+is followed by a colon, the option is expected to have an
+argument, which should be separated from it by white space.
+The colon and question mark characters may not be used as
+option characters.
+Each time it is invoked,
+.B getopts
+places the next option in the shell variable
+.IR name ,
+initializing
+.I name
+if it does not exist,
+and the index of the next argument to be processed into the
+variable
+.SM
+.BR OPTIND .
+.SM
+.B OPTIND
+is initialized to 1 each time the shell or a shell script
+is invoked.  When an option requires an argument,
+.B getopts
+places that argument into the variable
+.SM
+.BR OPTARG .
+The shell does not reset
+.SM
+.B OPTIND
+automatically; it must be manually reset between multiple
+calls to
+.B getopts
+within the same shell invocation if a new set of parameters
+is to be used.
+.sp 1
+When the end of options is encountered, \fBgetopts\fP exits with a
+return value greater than zero.
+.SM
+.B OPTIND
+is set to the index of the first non-option argument,
+and \fIname\fP is set to ?.
+.sp 1
+.B getopts
+normally parses the positional parameters, but if more arguments are
+supplied as
+.I arg
+values,
+.B getopts
+parses those instead.
+.sp 1
+.B getopts
+can report errors in two ways.  If the first character of
+.I optstring
+is a colon,
+.I silent
+error reporting is used.  In normal operation, diagnostic messages
+are printed when invalid options or missing option arguments are
+encountered.
+If the variable
+.SM
+.B OPTERR
+is set to 0, no error messages will be displayed, even if the first
+character of
+.I optstring
+is not a colon.
+.sp 1
+If an invalid option is seen,
+.B getopts
+places ? into
+.I name
+and, if not silent,
+prints an error message and unsets
+.SM
+.BR OPTARG .
+If
+.B getopts
+is silent,
+the option character found is placed in
+.SM
+.B OPTARG
+and no diagnostic message is printed.
+.sp 1
+If a required argument is not found, and
+.B getopts
+is not silent,
+a question mark (\^\fB?\fP\^) is placed in
+.IR name ,
+.SM
+.B OPTARG
+is unset, and a diagnostic message is printed.
+If
+.B getopts
+is silent, then a colon (\^\fB:\fP\^) is placed in
+.I name
+and
+.SM
+.B OPTARG
+is set to the option character found.
+.sp 1
+.B getopts
+returns true if an option, specified or unspecified, is found.
+It returns false if the end of options is encountered or an
+error occurs.
+.TP
+\fBhash\fP [\fB\-lr\fP] [\fB\-p\fP \fIfilename\fP] [\fB\-dt\fP] [\fIname\fP]
+Each time \fBhash\fP is invoked,
+the full pathname of the command
+.I name
+is determined by searching
+the directories in
+.B $PATH
+and remembered.  Any previously-remembered pathname is discarded.
+If the
+.B \-p
+option is supplied, no path search is performed, and
+.I filename
+is used as the full filename of the command.
+The
+.B \-r
+option causes the shell to forget all
+remembered locations.
+The
+.B \-d
+option causes the shell to forget the remembered location of each \fIname\fP.
+If the
+.B \-t
+option is supplied, the full pathname to which each \fIname\fP corresponds
+is printed.  If multiple \fIname\fP arguments are supplied with \fB\-t\fP,
+the \fIname\fP is printed before the hashed full pathname.
+The
+.B \-l
+option causes output to be displayed in a format that may be reused as input.
+If no arguments are given, or if only \fB\-l\fP is supplied,
+information about remembered commands is printed.
+The return status is true unless a
+.I name
+is not found or an invalid option is supplied.
+.TP
+\fBhelp\fP [\fB\-dms\fP] [\fIpattern\fP]
+Display helpful information about builtin commands.  If
+.I pattern
+is specified,
+.B help
+gives detailed help on all commands matching
+.IR pattern ;
+otherwise help for all the builtins and shell control structures
+is printed.
+.RS
+.PD 0
+.TP
+.B \-d
+Display a short description of each \fIpattern\fP
+.TP
+.B \-m
+Display the description of each \fIpattern\fP in a manpage-like format
+.TP
+.B \-s
+Display only a short usage synopsis for each \fIpattern\fP
+.PD
+.PP
+The return status is 0 unless no command matches
+.IR pattern .
+.RE
+.TP
+\fBhistory [\fIn\fP]
+.PD 0
+.TP
+\fBhistory\fP \fB\-c\fP
+.TP
+\fBhistory \-d\fP \fIoffset\fP
+.TP
+\fBhistory \-d\fP \fIstart\fP\-\fIend\fP
+.TP
+\fBhistory\fP \fB\-anrw\fP [\fIfilename\fP]
+.TP
+\fBhistory\fP \fB\-p\fP \fIarg\fP [\fIarg ...\fP]
+.TP
+\fBhistory\fP \fB\-s\fP \fIarg\fP [\fIarg ...\fP]
+.PD
+With no options, display the command
+history list with line numbers.  Lines listed
+with a
+.B *
+have been modified.  An argument of
+.I n
+lists only the last
+.I n
+lines.
+If the shell variable
+.SM
+.B HISTTIMEFORMAT
+is set and not null,
+it is used as a format string for \fIstrftime\fP(3) to display
+the time stamp associated with each displayed history entry.
+No intervening blank is printed between the formatted time stamp
+and the history line.
+If \fIfilename\fP is supplied, it is used as the
+name of the history file; if not, the value of
+.SM
+.B HISTFILE
+is used.  Options, if supplied, have the following meanings:
+.RS
+.PD 0
+.TP
+.B \-c
+Clear the history list by deleting all the entries.
+.TP
+\fB\-d\fP \fIoffset\fP
+Delete the history entry at position \fIoffset\fP.
+If \fIoffset\fP is negative, it is interpreted as relative to one greater
+than the last history position, so negative indices count back from the
+end of the history, and an index of \-1 refers to the current
+\fBhistory -d\fP command.
+.TP
+\fB\-d\fP \fIstart\fP\-\fIend\fP
+Delete the history entries between positions \fIstart\fP and \fIend\fP,
+inclusive.  Positive and negative values for \fIstart\fP and \fIend\fP
+are interpreted as described above.
+.TP
+.B \-a
+Append the ``new'' history lines to the history file.
+These are history lines entered since the beginning of the current
+\fBbash\fP session, but not already appended to the history file.
+.TP
+.B \-n
+Read the history lines not already read from the history
+file into the current history list.  These are lines
+appended to the history file since the beginning of the
+current \fBbash\fP session.
+.TP
+.B \-r
+Read the contents of the history file
+and append them to the current history list.
+.TP
+.B \-w
+Write the current history list to the history file, overwriting the
+history file's contents.
+.TP
+.B \-p
+Perform history substitution on the following \fIargs\fP and display
+the result on the standard output.
+Does not store the results in the history list.
+Each \fIarg\fP must be quoted to disable normal history expansion.
+.TP
+.B \-s
+Store the
+.I args
+in the history list as a single entry.  The last command in the
+history list is removed before the
+.I args
+are added.
+.PD
+.PP
+If the
+.SM
+.B HISTTIMEFORMAT
+variable is set, the time stamp information
+associated with each history entry is written to the history file,
+marked with the history comment character.
+When the history file is read, lines beginning with the history
+comment character followed immediately by a digit are interpreted
+as timestamps for the following history entry.
+The return value is 0 unless an invalid option is encountered, an
+error occurs while reading or writing the history file, an invalid
+\fIoffset\fP is supplied as an argument to \fB\-d\fP, or the
+history expansion supplied as an argument to \fB\-p\fP fails.
+.RE
+.TP
+\fBjobs\fP [\fB\-lnprs\fP] [ \fIjobspec\fP ... ]
+.PD 0
+.TP
+\fBjobs\fP \fB\-x\fP \fIcommand\fP [ \fIargs\fP ... ]
+.PD
+The first form lists the active jobs.  The options have the following
+meanings:
+.RS
+.PD 0
+.TP
+.B \-l
+List process IDs
+in addition to the normal information.
+.TP
+.B \-n
+Display information only about jobs that have changed status since
+the user was last notified of their status.
+.TP
+.B \-p
+List only the process ID of the job's process group
+leader.
+.TP
+.B \-r
+Display only running jobs.
+.TP
+.B \-s
+Display only stopped jobs.
+.PD
+.PP
+If
+.I jobspec
+is given, output is restricted to information about that job.
+The return status is 0 unless an invalid option is encountered
+or an invalid
+.I jobspec
+is supplied.
+.PP
+If the
+.B \-x
+option is supplied,
+.B jobs
+replaces any
+.I jobspec
+found in
+.I command
+or
+.I args
+with the corresponding process group ID, and executes
+.I command
+passing it
+.IR args ,
+returning its exit status.
+.RE
+.TP
+\fBkill\fP [\fB\-s\fP \fIsigspec\fP | \fB\-n\fP \fIsignum\fP | \fB\-\fP\fIsigspec\fP] [\fIpid\fP | \fIjobspec\fP] ...
+.PD 0
+.TP
+\fBkill\fP \fB\-l\fP|\fB\-L\fP [\fIsigspec\fP | \fIexit_status\fP]
+.PD
+Send the signal named by
+.I sigspec
+or
+.I signum
+to the processes named by
+.I pid
+or
+.IR jobspec .
+.I sigspec
+is either a case-insensitive signal name such as
+.SM
+.B SIGKILL
+(with or without the
+.SM
+.B SIG
+prefix) or a signal number;
+.I signum
+is a signal number.
+If
+.I sigspec
+is not present, then
+.SM
+.B SIGTERM
+is assumed.
+An argument of
+.B \-l
+lists the signal names.
+If any arguments are supplied when
+.B \-l
+is given, the names of the signals corresponding to the arguments are
+listed, and the return status is 0.
+The \fIexit_status\fP argument to
+.B \-l
+is a number specifying either a signal number or the exit status of
+a process terminated by a signal.
+The
+.B \-L
+option is equivalent to \fB\-l\fP.
+.B kill
+returns true if at least one signal was successfully sent, or false
+if an error occurs or an invalid option is encountered.
+.TP
+\fBlet\fP \fIarg\fP [\fIarg\fP ...]
+Each
+.I arg
+is an arithmetic expression to be evaluated (see
+.SM
+.B "ARITHMETIC EVALUATION"
+above).
+If the last
+.I arg
+evaluates to 0,
+.B let
+returns 1; 0 is returned otherwise.
+.TP
+\fBlocal\fP [\fIoption\fP] [\fIname\fP[=\fIvalue\fP] ... | \- ]
+For each argument, a local variable named
+.I name
+is created, and assigned
+.IR value .
+The \fIoption\fP can be any of the options accepted by \fBdeclare\fP.
+When
+.B local
+is used within a function, it causes the variable
+.I name
+to have a visible scope restricted to that function and its children.
+If \fIname\fP is \-, the set of shell options is made local to the function
+in which \fBlocal\fP is invoked: shell options changed using the
+\fBset\fP builtin inside the function are restored to their original values
+when the function returns.
+The restore is effected as if a series of \fBset\fP commands were executed
+to restore the values that were in place before the function.
+With no operands,
+.B local
+writes a list of local variables to the standard output.  It is
+an error to use
+.B local
+when not within a function.  The return status is 0 unless
+.B local
+is used outside a function, an invalid
+.I name
+is supplied, or
+\fIname\fP is a readonly variable.
+.TP
+.B logout
+Exit a login shell.
+.TP
+\fBmapfile\fP [\fB\-d\fP \fIdelim\fP] [\fB\-n\fP \fIcount\fP] [\fB\-O\fP \fIorigin\fP] [\fB\-s\fP \fIcount\fP] [\fB\-t\fP] [\fB\-u\fP \fIfd\fP] [\fB\-C\fP \fIcallback\fP] [\fB\-c\fP \fIquantum\fP] [\fIarray\fP]
+.PD 0
+.TP
+\fBreadarray\fP [\fB\-d\fP \fIdelim\fP] [\fB\-n\fP \fIcount\fP] [\fB\-O\fP \fIorigin\fP] [\fB\-s\fP \fIcount\fP] [\fB\-t\fP] [\fB\-u\fP \fIfd\fP] [\fB\-C\fP \fIcallback\fP] [\fB\-c\fP \fIquantum\fP] [\fIarray\fP]
+.PD
+Read lines from the standard input into the indexed array variable
+.IR array ,
+or from file descriptor
+.I fd
+if the
+.B \-u
+option is supplied.
+The variable
+.SM
+.B MAPFILE
+is the default \fIarray\fP.
+Options, if supplied, have the following meanings:
+.RS
+.PD 0
+.TP
+.B \-d
+The first character of \fIdelim\fP is used to terminate each input line,
+rather than newline.
+If \fIdelim\fP is the empty string, \fBmapfile\fP will terminate a line
+when it reads a NUL character.
+.TP
+.B \-n
+Copy at most
+.I count
+lines.  If \fIcount\fP is 0, all lines are copied.
+.TP
+.B \-O
+Begin assigning to
+.I array
+at index
+.IR origin .
+The default index is 0.
+.TP
+.B \-s
+Discard the first \fIcount\fP lines read.
+.TP
+.B \-t
+Remove a trailing \fIdelim\fP (default newline) from each line read.
+.TP
+.B \-u
+Read lines from file descriptor \fIfd\fP instead of the standard input.
+.TP
+.B \-C
+Evaluate
+.I callback
+each time \fIquantum\fP lines are read.  The \fB\-c\fP option specifies
+.IR quantum .
+.TP
+.B \-c
+Specify the number of lines read between each call to
+.IR callback .
+.PD
+.PP
+If
+.B \-C
+is specified without
+.BR \-c ,
+the default quantum is 5000.
+When \fIcallback\fP is evaluated, it is supplied the index of the next
+array element to be assigned and the line to be assigned to that element
+as additional arguments.
+\fIcallback\fP is evaluated after the line is read but before the
+array element is assigned.
+.PP
+If not supplied with an explicit origin, \fBmapfile\fP will clear \fIarray\fP
+before assigning to it.
+.PP
+\fBmapfile\fP returns successfully unless an invalid option or option
+argument is supplied, \fIarray\fP is invalid or unassignable, or if
+\fIarray\fP is not an indexed array.
+.RE
+.TP
+\fBpopd\fP [\-\fBn\fP] [+\fIn\fP] [\-\fIn\fP]
+Removes entries from the directory stack.  With no arguments,
+removes the top directory from the stack, and performs a
+.B cd
+to the new top directory.
+Arguments, if supplied, have the following meanings:
+.RS
+.PD 0
+.TP
+.B \-n
+Suppresses the normal change of directory when removing directories
+from the stack, so that only the stack is manipulated.
+.TP
+\fB+\fP\fIn\fP
+Removes the \fIn\fPth entry counting from the left of the list
+shown by
+.BR dirs ,
+starting with zero.  For example:
+.if n ``popd +0''
+.if t \f(CWpopd +0\fP
+removes the first directory,
+.if n ``popd +1''
+.if t \f(CWpopd +1\fP
+the second.
+.TP
+\fB\-\fP\fIn\fP
+Removes the \fIn\fPth entry counting from the right of the list
+shown by
+.BR dirs ,
+starting with zero.  For example:
+.if n ``popd -0''
+.if t \f(CWpopd -0\fP
+removes the last directory,
+.if n ``popd -1''
+.if t \f(CWpopd -1\fP
+the next to last.
+.PD
+.PP
+If the
+.B popd
+command is successful, a
+.B dirs
+is performed as well, and the return status is 0.
+.B popd
+returns false if an invalid option is encountered, the directory stack
+is empty, a non-existent directory stack entry is specified, or the
+directory change fails.
+.RE
+.TP
+\fBprintf\fP [\fB\-v\fP \fIvar\fP] \fIformat\fP [\fIarguments\fP]
+Write the formatted \fIarguments\fP to the standard output under the
+control of the \fIformat\fP.
+The \fB\-v\fP option causes the output to be assigned to the variable
+\fIvar\fP rather than being printed to the standard output.
+.sp 1
+The \fIformat\fP is a character string which contains three types of objects:
+plain characters, which are simply copied to standard output, character
+escape sequences, which are converted and copied to the standard output, and
+format specifications, each of which causes printing of the next successive
+\fIargument\fP.
+In addition to the standard \fIprintf\fP(1) format specifications,
+\fBprintf\fP interprets the following extensions:
+.RS
+.PD 0
+.TP
+.B %b
+causes
+\fBprintf\fP to expand backslash escape sequences in the corresponding
+\fIargument\fP
+in the same way as \fBecho \-e\fP.
+.TP
+.B %q
+causes \fBprintf\fP to output the corresponding
+\fIargument\fP in a format that can be reused as shell input.
+.TP
+.B %(\fIdatefmt\fP)T
+causes \fBprintf\fP to output the date-time string resulting from using
+\fIdatefmt\fP as a format string for \fIstrftime\fP(3).
+The corresponding \fIargument\fP is an integer representing the number of
+seconds since the epoch.
+Two special argument values may be used: \-1 represents the current
+time, and \-2 represents the time the shell was invoked.
+If no argument is specified, conversion behaves as if \-1 had been given.
+This is an exception to the usual \fBprintf\fP behavior.
+.PD
+.PP
+The %b, %q, and %T directives all use the field width and precision
+arguments from the format specification and write that many bytes from
+(or use that wide a field for) the expanded argument, which usually
+contains more characters than the original.
+.PP
+Arguments to non-string format specifiers are treated as C constants,
+except that a leading plus or minus sign is allowed, and if the leading
+character is a single or double quote, the value is the ASCII value of
+the following character.
+.PP
+The \fIformat\fP is reused as necessary to consume all of the \fIarguments\fP.
+If the \fIformat\fP requires more \fIarguments\fP than are supplied, the
+extra format specifications behave as if a zero value or null string, as
+appropriate, had been supplied.
+The return value is zero on success, non-zero on failure.
+.RE
+.TP
+\fBpushd\fP [\fB\-n\fP] [+\fIn\fP] [\-\fIn\fP]
+.PD 0
+.TP
+\fBpushd\fP [\fB\-n\fP] [\fIdir\fP]
+.PD
+Adds a directory to the top of the directory stack, or rotates
+the stack, making the new top of the stack the current working
+directory.  With no arguments, \fBpushd\fP exchanges the top two directories
+and returns 0, unless the directory stack is empty.
+Arguments, if supplied, have the following meanings:
+.RS
+.PD 0
+.TP
+.B \-n
+Suppresses the normal change of directory when rotating or
+adding directories to the stack, so that only the stack is manipulated.
+.TP
+\fB+\fP\fIn\fP
+Rotates the stack so that the \fIn\fPth directory
+(counting from the left of the list shown by
+.BR dirs ,
+starting with zero)
+is at the top.
+.TP
+\fB\-\fP\fIn\fP
+Rotates the stack so that the \fIn\fPth directory
+(counting from the right of the list shown by
+.BR dirs ,
+starting with zero) is at the top.
+.TP
+.I dir
+Adds
+.I dir
+to the directory stack at the top, making it the
+new current working directory as if it had been supplied as the argument
+to the \fBcd\fP builtin.
+.PD
+.PP
+If the
+.B pushd
+command is successful, a
+.B dirs
+is performed as well.
+If the first form is used,
+.B pushd
+returns 0 unless the cd to
+.I dir
+fails.  With the second form,
+.B pushd
+returns 0 unless the directory stack is empty,
+a non-existent directory stack element is specified,
+or the directory change to the specified new current directory
+fails.
+.RE
+.TP
+\fBpwd\fP [\fB\-LP\fP]
+Print the absolute pathname of the current working directory.
+The pathname printed contains no symbolic links if the
+.B \-P
+option is supplied or the
+.B \-o physical
+option to the
+.B set
+builtin command is enabled.
+If the
+.B \-L
+option is used, the pathname printed may contain symbolic links.
+The return status is 0 unless an error occurs while
+reading the name of the current directory or an
+invalid option is supplied.
+.TP
+\fBread\fP [\fB\-ers\fP] [\fB\-a\fP \fIaname\fP] [\fB\-d\fP \fIdelim\fP] [\fB\-i\fP \fItext\fP] [\fB\-n\fP \fInchars\fP] [\fB\-N\fP \fInchars\fP] [\fB\-p\fP \fIprompt\fP] [\fB\-t\fP \fItimeout\fP] [\fB\-u\fP \fIfd\fP] [\fIname\fP ...]
+One line is read from the standard input, or from the file descriptor
+\fIfd\fP supplied as an argument to the \fB\-u\fP option,
+split into words as described above under \fBWord Splitting\fP,
+and the first word
+is assigned to the first
+.IR name ,
+the second word to the second
+.IR name ,
+and so on.
+If there are more words than names, the remaining words and their
+intervening delimiters are assigned to the last
+.IR name .
+If there are fewer words read from the input stream than names,
+the remaining names are assigned empty values.
+The characters in
+.SM
+.B IFS
+are used to split the line into words using the same rules the shell
+uses for expansion (described above under \fBWord Splitting\fP).
+The backslash character (\fB\e\fP) may be used to remove any special
+meaning for the next character read and for line continuation.
+Options, if supplied, have the following meanings:
+.RS
+.PD 0
+.TP
+.B \-a \fIaname\fP
+The words are assigned to sequential indices
+of the array variable
+.IR aname ,
+starting at 0.
+.I aname
+is unset before any new values are assigned.
+Other \fIname\fP arguments are ignored.
+.TP
+.B \-d \fIdelim\fP
+The first character of \fIdelim\fP is used to terminate the input line,
+rather than newline.
+If \fIdelim\fP is the empty string, \fBread\fP will terminate a line
+when it reads a NUL character.
+.TP
+.B \-e
+If the standard input
+is coming from a terminal,
+.B readline
+(see
+.SM
+.B READLINE
+above) is used to obtain the line.
+Readline uses the current (or default, if line editing was not previously
+active) editing settings, but uses Readline's default filename completion.
+.TP
+.B \-i \fItext\fP
+If
+.B readline
+is being used to read the line, \fItext\fP is placed into the editing
+buffer before editing begins.
+.TP
+.B \-n \fInchars\fP
+\fBread\fP returns after reading \fInchars\fP characters rather than
+waiting for a complete line of input, but honors a delimiter if fewer
+than \fInchars\fP characters are read before the delimiter.
+.TP
+.B \-N \fInchars\fP
+\fBread\fP returns after reading exactly \fInchars\fP characters rather
+than waiting for a complete line of input, unless EOF is encountered or
+\fBread\fP times out.
+Delimiter characters encountered in the input are
+not treated specially and do not cause \fBread\fP to return until
+\fInchars\fP characters are read.
+The result is not split on the characters in \fBIFS\fP; the intent is
+that the variable is assigned exactly the characters read
+(with the exception of backslash; see the \fB\-r\fP option below).
+.TP
+.B \-p \fIprompt\fP
+Display \fIprompt\fP on standard error, without a
+trailing newline, before attempting to read any input.  The prompt
+is displayed only if input is coming from a terminal.
+.TP
+.B \-r
+Backslash does not act as an escape character.
+The backslash is considered to be part of the line.
+In particular, a backslash-newline pair may not then be used as a line
+continuation.
+.TP
+.B \-s
+Silent mode.  If input is coming from a terminal, characters are
+not echoed.
+.TP
+.B \-t \fItimeout\fP
+Cause \fBread\fP to time out and return failure if a complete line of
+input (or a specified number of characters)
+is not read within \fItimeout\fP seconds.
+\fItimeout\fP may be a decimal number with a fractional portion following
+the decimal point.
+This option is only effective if \fBread\fP is reading input from a
+terminal, pipe, or other special file; it has no effect when reading
+from regular files.
+If \fBread\fP times out, \fBread\fP saves any partial input read into
+the specified variable \fIname\fP.
+If \fItimeout\fP is 0, \fBread\fP returns immediately, without trying to
+read any data.  The exit status is 0 if input is available on
+the specified file descriptor, non-zero otherwise.
+The exit status is greater than 128 if the timeout is exceeded.
+.TP
+.B \-u \fIfd\fP
+Read input from file descriptor \fIfd\fP.
+.PD
+.PP
+If no
+.I names
+are supplied, the line read,
+without the ending delimiter but otherwise unmodified,
+is assigned to the variable
+.SM
+.BR REPLY .
+The exit status is zero, unless end-of-file is encountered, \fBread\fP
+times out (in which case the status is greater than 128),
+a variable assignment error (such as assigning to a readonly variable) occurs,
+or an invalid file descriptor is supplied as the argument to \fB\-u\fP.
+.RE
+.TP
+\fBreadonly\fP [\fB\-aAf\fP] [\fB\-p\fP] [\fIname\fP[=\fIword\fP] ...]
+.PD
+The given
+\fInames\fP are marked readonly; the values of these
+.I names
+may not be changed by subsequent assignment.
+If the
+.B \-f
+option is supplied, the functions corresponding to the
+\fInames\fP are so
+marked.
+The
+.B \-a
+option restricts the variables to indexed arrays; the
+.B \-A
+option restricts the variables to associative arrays.
+If both options are supplied,
+.B \-A
+takes precedence.
+If no
+.I name
+arguments are given, or if the
+.B \-p
+option is supplied, a list of all readonly names is printed.
+The other options may be used to restrict the output to a subset of
+the set of readonly names.
+The
+.B \-p
+option causes output to be displayed in a format that
+may be reused as input.
+If a variable name is followed by =\fIword\fP, the value of
+the variable is set to \fIword\fP.
+The return status is 0 unless an invalid option is encountered,
+one of the
+.I names
+is not a valid shell variable name, or
+.B \-f
+is supplied with a
+.I name
+that is not a function.
+.TP
+\fBreturn\fP [\fIn\fP]
+Causes a function to stop executing and return the value specified by
+.I n
+to its caller.
+If
+.I n
+is omitted, the return status is that of the last command
+executed in the function body.
+If \fBreturn\fP is executed by a trap handler, the last command used to
+determine the status is the last command executed before the trap handler.
+If \fBreturn\fP is executed during a \fBDEBUG\fP trap, the last command
+used to determine the status is the last command executed by the trap
+handler before \fBreturn\fP was invoked.
+If
+.B return
+is used outside a function,
+but during execution of a script by the
+.B .
+(\fBsource\fP) command, it causes the shell to stop executing
+that script and return either
+.I n
+or the exit status of the last command executed within the
+script as the exit status of the script.
+If \fIn\fP is supplied, the return value is its least significant
+8 bits.
+The return status is non-zero if
+.B return
+is supplied a non-numeric argument, or
+is used outside a
+function and not during execution of a script by \fB.\fP\^ or \fBsource\fP.
+Any command associated with the \fBRETURN\fP trap is executed
+before execution resumes after the function or script.
+.TP
+\fBset\fP [\fB\-\-abefhkmnptuvxBCEHPT\fP] [\fB\-o\fP \fIoption\-name\fP] [\fIarg\fP ...]
+.PD 0
+.TP
+\fBset\fP [\fB+abefhkmnptuvxBCEHPT\fP] [\fB+o\fP \fIoption\-name\fP] [\fIarg\fP ...]
+.PD
+Without options, the name and value of each shell variable are displayed
+in a format that can be reused as input
+for setting or resetting the currently-set variables.
+Read-only variables cannot be reset.
+In \fIposix mode\fP, only shell variables are listed.
+The output is sorted according to the current locale.
+When options are specified, they set or unset shell attributes.
+Any arguments remaining after option processing are treated
+as values for the positional parameters and are assigned, in order, to
+.BR $1 ,
+.BR $2 ,
+.B ...
+.BR $\fIn\fP .
+Options, if specified, have the following meanings:
+.RS
+.PD 0
+.TP 8
+.B \-a
+Each variable or function that is created or modified is given the
+export attribute and marked for export to the environment of
+subsequent commands.
+.TP 8
+.B \-b
+Report the status of terminated background jobs
+immediately, rather than before the next primary prompt.  This is
+effective only when job control is enabled.
+.TP 8
+.B \-e
+Exit immediately if a
+\fIpipeline\fP (which may consist of a single \fIsimple command\fP),
+a \fIlist\fP,
+or a \fIcompound command\fP
+(see
+.SM
+.B SHELL GRAMMAR
+above), exits with a non-zero status.
+The shell does not exit if the
+command that fails is part of the command list immediately following a
+.B while
+or
+.B until
+keyword,
+part of the test following the
+.B if
+or
+.B elif
+reserved words, part of any command executed in a
+.B &&
+or
+.B ||
+list except the command following the final \fB&&\fP or \fB||\fP,
+any command in a pipeline but the last,
+or if the command's return value is
+being inverted with
+.BR ! .
+If a compound command other than a subshell
+returns a non-zero status because a command failed
+while \fB\-e\fP was being ignored, the shell does not exit.
+A trap on \fBERR\fP, if set, is executed before the shell exits.
+This option applies to the shell environment and each subshell environment
+separately (see
+.SM
+.B "COMMAND EXECUTION ENVIRONMENT"
+above), and may cause
+subshells to exit before executing all the commands in the subshell.
+.if t .sp 0.5
+.if n .sp 1
+If a compound command or shell function executes in a context
+where \fB\-e\fP is being ignored,
+none of the commands executed within the compound command or function body
+will be affected by the \fB\-e\fP setting, even if \fB\-e\fP is set
+and a command returns a failure status.
+If a compound command or shell function sets \fB\-e\fP while executing in
+a context where \fB\-e\fP is ignored, that setting will not have any
+effect until the compound command or the command containing the function
+call completes.
+.TP 8
+.B \-f
+Disable pathname expansion.
+.TP 8
+.B \-h
+Remember the location of commands as they are looked up for execution.
+This is enabled by default.
+.TP 8
+.B \-k
+All arguments in the form of assignment statements
+are placed in the environment for a command, not just
+those that precede the command name.
+.TP 8
+.B \-m
+Monitor mode.  Job control is enabled.  This option is on
+by default for interactive shells on systems that support
+it (see
+.SM
+.B JOB CONTROL
+above).
+All processes run in a separate process group.
+When a background job completes, the shell prints a line
+containing its exit status.
+.TP 8
+.B \-n
+Read commands but do not execute them.
+This may be used to check a shell script for syntax errors.
+This is ignored by interactive shells.
+.TP 8
+.B \-o \fIoption\-name\fP
+The \fIoption\-name\fP can be one of the following:
+.RS
+.TP 8
+.B allexport
+Same as
+.BR \-a .
+.TP 8
+.B braceexpand
+Same as
+.BR \-B .
+.TP 8
+.B emacs
+Use an emacs-style command line editing interface.  This is enabled
+by default when the shell is interactive, unless the shell is started
+with the
+.B \-\-noediting
+option.
+This also affects the editing interface used for \fBread \-e\fP.
+.TP 8
+.B errexit
+Same as
+.BR \-e .
+.TP 8
+.B errtrace
+Same as
+.BR \-E .
+.TP 8
+.B functrace
+Same as
+.BR \-T .
+.TP 8
+.B hashall
+Same as
+.BR \-h .
+.TP 8
+.B histexpand
+Same as
+.BR \-H .
+.TP 8
+.B history
+Enable command history, as described above under
+.SM
+.BR HISTORY .
+This option is on by default in interactive shells.
+.TP 8
+.B ignoreeof
+The effect is as if the shell command
+.if t \f(CWIGNOREEOF=10\fP
+.if n ``IGNOREEOF=10''
+had been executed
+(see
+.B Shell Variables
+above).
+.TP 8
+.B keyword
+Same as
+.BR \-k .
+.TP 8
+.B monitor
+Same as
+.BR \-m .
+.TP 8
+.B noclobber
+Same as
+.BR \-C .
+.TP 8
+.B noexec
+Same as
+.BR \-n .
+.TP 8
+.B noglob
+Same as
+.BR \-f .
+.TP 8
+.B nolog
+Currently ignored.
+.TP 8
+.B notify
+Same as
+.BR \-b .
+.TP 8
+.B nounset
+Same as
+.BR \-u .
+.TP 8
+.B onecmd
+Same as
+.BR \-t .
+.TP 8
+.B physical
+Same as
+.BR \-P .
+.TP 8
+.B pipefail
+If set, the return value of a pipeline is the value of the last
+(rightmost) command to exit with a non-zero status, or zero if all
+commands in the pipeline exit successfully.
+This option is disabled by default.
+.TP 8
+.B posix
+Change the behavior of
+.B bash
+where the default operation differs
+from the POSIX standard to match the standard (\fIposix mode\fP).
+See
+.SM
+.B "SEE ALSO"
+below for a reference to a document that details how posix mode affects
+bash's behavior.
+.TP 8
+.B privileged
+Same as
+.BR \-p .
+.TP 8
+.B verbose
+Same as
+.BR \-v .
+.TP 8
+.B vi
+Use a vi-style command line editing interface.
+This also affects the editing interface used for \fBread \-e\fP.
+.TP 8
+.B xtrace
+Same as
+.BR \-x .
+.sp .5
+.PP
+If
+.B \-o
+is supplied with no \fIoption\-name\fP, the values of the current options are
+printed.
+If
+.B +o
+is supplied with no \fIoption\-name\fP, a series of
+.B set
+commands to recreate the current option settings is displayed on
+the standard output.
+.RE
+.TP 8
+.B \-p
+Turn on
+.I privileged
+mode.  In this mode, the
+.SM
+.B $ENV
+and
+.SM
+.B $BASH_ENV
+files are not processed, shell functions are not inherited from the
+environment, and the
+.SM
+.BR SHELLOPTS ,
+.SM
+.BR BASHOPTS ,
+.SM
+.BR CDPATH ,
+and
+.SM
+.B GLOBIGNORE
+variables, if they appear in the environment, are ignored.
+If the shell is started with the effective user (group) id not equal to the
+real user (group) id, and the \fB\-p\fP option is not supplied, these actions
+are taken and the effective user id is set to the real user id.
+If the \fB\-p\fP option is supplied at startup, the effective user id is
+not reset.
+Turning this option off causes the effective user
+and group ids to be set to the real user and group ids.
+.TP 8
+.B \-t
+Exit after reading and executing one command.
+.TP 8
+.B \-u
+Treat unset variables and parameters other than the special
+parameters "@" and "*" as an error when performing
+parameter expansion.  If expansion is attempted on an
+unset variable or parameter, the shell prints an error message, and,
+if not interactive, exits with a non-zero status.
+.TP 8
+.B \-v
+Print shell input lines as they are read.
+.TP 8
+.B \-x
+After expanding each \fIsimple command\fP,
+\fBfor\fP command, \fBcase\fP command, \fBselect\fP command, or
+arithmetic \fBfor\fP command, display the expanded value of
+.SM
+.BR PS4 ,
+followed by the command and its expanded arguments
+or associated word list.
+.TP 8
+.B \-B
+The shell performs brace expansion (see
+.B Brace Expansion
+above).  This is on by default.
+.TP 8
+.B \-C
+If set,
+.B bash
+does not overwrite an existing file with the
+.BR > ,
+.BR >& ,
+and
+.B <>
+redirection operators.  This may be overridden when
+creating output files by using the redirection operator
+.B >|
+instead of
+.BR > .
+.TP 8
+.B \-E
+If set, any trap on \fBERR\fP is inherited by shell functions, command
+substitutions, and commands executed in a subshell environment.
+The \fBERR\fP trap is normally not inherited in such cases.
+.TP 8
+.B \-H
+Enable
+.B !
+style history substitution.  This option is on by
+default when the shell is interactive.
+.TP 8
+.B \-P
+If set, the shell does not resolve symbolic links when executing
+commands such as
+.B cd
+that change the current working directory.  It uses the
+physical directory structure instead.  By default,
+.B bash
+follows the logical chain of directories when performing commands
+which change the current directory.
+.TP 8
+.B \-T
+If set, any traps on \fBDEBUG\fP and \fBRETURN\fP are inherited by shell
+functions, command substitutions, and commands executed in a
+subshell environment.
+The \fBDEBUG\fP and \fBRETURN\fP traps are normally not inherited
+in such cases.
+.TP 8
+.B \-\-
+If no arguments follow this option, then the positional parameters are
+unset.  Otherwise, the positional parameters are set to the
+\fIarg\fPs, even if some of them begin with a
+.BR \- .
+.TP 8
+.B \-
+Signal the end of options, cause all remaining \fIarg\fPs to be
+assigned to the positional parameters.  The
+.B \-x
+and
+.B \-v
+options are turned off.
+If there are no \fIarg\fPs,
+the positional parameters remain unchanged.
+.PD
+.PP
+The options are off by default unless otherwise noted.
+Using + rather than \- causes these options to be turned off.
+The options can also be specified as arguments to an invocation of
+the shell.
+The current set of options may be found in
+.BR $\- .
+The return status is always true unless an invalid option is encountered.
+.RE
+.TP
+\fBshift\fP [\fIn\fP]
+The positional parameters from \fIn\fP+1 ... are renamed to
+.B $1
+.B ....
+Parameters represented by the numbers \fB$#\fP
+down to \fB$#\fP\-\fIn\fP+1 are unset.
+.I n
+must be a non-negative number less than or equal to \fB$#\fP.
+If
+.I n
+is 0, no parameters are changed.
+If
+.I n
+is not given, it is assumed to be 1.
+If
+.I n
+is greater than \fB$#\fP, the positional parameters are not changed.
+The return status is greater than zero if
+.I n
+is greater than
+.B $#
+or less than zero; otherwise 0.
+.TP
+\fBshopt\fP [\fB\-pqsu\fP] [\fB\-o\fP] [\fIoptname\fP ...]
+Toggle the values of settings controlling optional shell behavior.
+The settings can be either those listed below, or, if the
+.B \-o
+option is used, those available with the
+.B \-o
+option to the \fBset\fP builtin command.
+With no options, or with the
+.B \-p
+option, a list of all settable options is displayed, with
+an indication of whether or not each is set;
+if \fIoptnames\fP are supplied, the output is restricted to those options.
+The \fB\-p\fP option causes output to be displayed in a form that
+may be reused as input.
+Other options have the following meanings:
+.RS
+.PD 0
+.TP
+.B \-s
+Enable (set) each \fIoptname\fP.
+.TP
+.B \-u
+Disable (unset) each \fIoptname\fP.
+.TP
+.B \-q
+Suppresses normal output (quiet mode); the return status indicates
+whether the \fIoptname\fP is set or unset.
+If multiple \fIoptname\fP arguments are given with
+.BR \-q ,
+the return status is zero if all \fIoptnames\fP are enabled; non-zero
+otherwise.
+.TP
+.B \-o
+Restricts the values of \fIoptname\fP to be those defined for the
+.B \-o
+option to the
+.B set
+builtin.
+.PD
+.PP
+If either
+.B \-s
+or
+.B \-u
+is used with no \fIoptname\fP arguments,
+.B shopt
+shows only those options which are set or unset, respectively.
+Unless otherwise noted, the \fBshopt\fP options are disabled (unset)
+by default.
+.PP
+The return status when listing options is zero if all \fIoptnames\fP
+are enabled, non-zero otherwise.  When setting or unsetting options,
+the return status is zero unless an \fIoptname\fP is not a valid shell
+option.
+.PP
+The list of \fBshopt\fP options is:
+.if t .sp .5v
+.if n .sp 1v
+.PD 0
+.TP 8
+.B assoc_expand_once
+If set, the shell suppresses multiple evaluation of associative array
+subscripts during arithmetic expression evaluation, while executing
+builtins that can perform variable assignments,
+and while executing builtins that perform array dereferencing.
+.TP 8
+.B autocd
+If set, a command name that is the name of a directory is executed as if
+it were the argument to the \fBcd\fP command.
+This option is only used by interactive shells.
+.TP 8
+.B cdable_vars
+If set, an argument to the
+.B cd
+builtin command that
+is not a directory is assumed to be the name of a variable whose
+value is the directory to change to.
+.TP 8
+.B cdspell
+If set, minor errors in the spelling of a directory component in a
+.B cd
+command will be corrected.
+The errors checked for are transposed characters,
+a missing character, and one character too many.
+If a correction is found, the corrected filename is printed,
+and the command proceeds.
+This option is only used by interactive shells.
+.TP 8
+.B checkhash
+If set, \fBbash\fP checks that a command found in the hash
+table exists before trying to execute it.  If a hashed command no
+longer exists, a normal path search is performed.
+.TP 8
+.B checkjobs
+If set, \fBbash\fP lists the status of any stopped and running jobs before
+exiting an interactive shell.  If any jobs are running, this causes
+the exit to be deferred until a second exit is attempted without an
+intervening command (see
+.SM
+.B "JOB CONTROL"
+above).  The shell always
+postpones exiting if any jobs are stopped.
+.TP 8
+.B checkwinsize
+If set, \fBbash\fP checks the window size after each external (non-builtin)
+command and, if necessary, updates the values of
+.SM
+.B LINES
+and
+.SM
+.BR COLUMNS .
+This option is enabled by default.
+.TP 8
+.B cmdhist
+If set,
+.B bash
+attempts to save all lines of a multiple-line
+command in the same history entry.  This allows
+easy re-editing of multi-line commands.
+This option is enabled by default, but only has an effect if command
+history is enabled, as described above under
+.SM
+.BR HISTORY .
+.PD 0
+.TP 8
+.B compat31
+.TP 8
+.B compat32
+.TP 8
+.B compat40
+.TP 8
+.B compat41
+.TP 8
+.B compat42
+.TP 8
+.B compat43
+.TP 8
+.B compat44
+.PD
+These control aspects of the shell's compatibility mode
+(see
+.SM
+.B "SHELL COMPATIBILITY MODE"
+below).
+.TP 8
+.B complete_fullquote
+If set,
+.B bash
+quotes all shell metacharacters in filenames and directory names when
+performing completion.
+If not set,
+.B bash
+removes metacharacters such as the dollar sign from the set of
+characters that will be quoted in completed filenames
+when these metacharacters appear in shell variable references in words to be
+completed.
+This means that dollar signs in variable names that expand to directories
+will not be quoted;
+however, any dollar signs appearing in filenames will not be quoted, either.
+This is active only when bash is using backslashes to quote completed
+filenames.
+This variable is set by default, which is the default bash behavior in
+versions through 4.2.
+.TP 8
+.B direxpand
+If set,
+.B bash
+replaces directory names with the results of word expansion when performing
+filename completion.  This changes the contents of the readline editing
+buffer.
+If not set,
+.B bash
+attempts to preserve what the user typed.
+.TP 8
+.B dirspell
+If set,
+.B bash
+attempts spelling correction on directory names during word completion
+if the directory name initially supplied does not exist.
+.TP 8
+.B dotglob
+If set,
+.B bash
+includes filenames beginning with a `.' in the results of pathname
+expansion.
+The filenames
+.B ``.''
+and
+.B ``..''
+must always be matched explicitly, even if
+.B dotglob
+is set.
+.TP 8
+.B execfail
+If set, a non-interactive shell will not exit if
+it cannot execute the file specified as an argument to the
+.B exec
+builtin command.  An interactive shell does not exit if
+.B exec
+fails.
+.TP 8
+.B expand_aliases
+If set, aliases are expanded as described above under
+.SM
+.BR ALIASES .
+This option is enabled by default for interactive shells.
+.TP 8
+.B extdebug
+If set at shell invocation,
+or in a shell startup file,
+arrange to execute the debugger profile
+before the shell starts, identical to the \fB\-\-debugger\fP option.
+If set after invocation, behavior intended for use by debuggers is enabled:
+.RS
+.TP
+.B 1.
+The \fB\-F\fP option to the \fBdeclare\fP builtin displays the source
+file name and line number corresponding to each function name supplied
+as an argument.
+.TP
+.B 2.
+If the command run by the \fBDEBUG\fP trap returns a non-zero value, the
+next command is skipped and not executed.
+.TP
+.B 3.
+If the command run by the \fBDEBUG\fP trap returns a value of 2, and the
+shell is executing in a subroutine (a shell function or a shell script
+executed by the \fB.\fP or \fBsource\fP builtins), the shell simulates
+a call to \fBreturn\fP.
+.TP
+.B 4.
+.SM
+.B BASH_ARGC
+and
+.SM
+.B BASH_ARGV
+are updated as described in their descriptions above.
+.TP
+.B 5.
+Function tracing is enabled: command substitution, shell functions, and
+subshells invoked with \fB(\fP \fIcommand\fP \fB)\fP inherit the
+\fBDEBUG\fP and \fBRETURN\fP traps.
+.TP
+.B 6.
+Error tracing is enabled: command substitution, shell functions, and
+subshells invoked with \fB(\fP \fIcommand\fP \fB)\fP inherit the
+\fBERR\fP trap.
+.RE
+.TP 8
+.B extglob
+If set, the extended pattern matching features described above under
+\fBPathname Expansion\fP are enabled.
+.TP 8
+.B extquote
+If set, \fB$\fP\(aq\fIstring\fP\(aq and \fB$\fP"\fIstring\fP" quoting is
+performed within \fB${\fP\fIparameter\fP\fB}\fP expansions
+enclosed in double quotes.  This option is enabled by default.
+.TP 8
+.B failglob
+If set, patterns which fail to match filenames during pathname expansion
+result in an expansion error.
+.TP 8
+.B force_fignore
+If set, the suffixes specified by the
+.SM
+.B FIGNORE
+shell variable
+cause words to be ignored when performing word completion even if
+the ignored words are the only possible completions.
+See
+.SM
+\fBSHELL VARIABLES\fP
+above for a description of
+.SM
+.BR FIGNORE .
+This option is enabled by default.
+.TP 8
+.B globasciiranges
+If set, range expressions used in pattern matching bracket expressions (see
+.SM
+.B Pattern Matching
+above) behave as if in the traditional C locale when performing
+comparisons.  That is, the current locale's collating sequence
+is not taken into account, so
+.B b
+will not collate between
+.B A
+and
+.BR B ,
+and upper-case and lower-case ASCII characters will collate together.
+.TP 8
+.B globstar
+If set, the pattern \fB**\fP used in a pathname expansion context will
+match all files and zero or more directories and subdirectories.
+If the pattern is followed by a \fB/\fP, only directories and
+subdirectories match.
+.TP 8
+.B gnu_errfmt
+If set, shell error messages are written in the standard GNU error
+message format.
+.TP 8
+.B histappend
+If set, the history list is appended to the file named by the value
+of the
+.SM
+.B HISTFILE
+variable when the shell exits, rather than overwriting the file.
+.TP 8
+.B histreedit
+If set, and
+.B readline
+is being used, a user is given the opportunity to re-edit a
+failed history substitution.
+.TP 8
+.B histverify
+If set, and
+.B readline
+is being used, the results of history substitution are not immediately
+passed to the shell parser.  Instead, the resulting line is loaded into
+the \fBreadline\fP editing buffer, allowing further modification.
+.TP 8
+.B hostcomplete
+If set, and
+.B readline
+is being used, \fBbash\fP will attempt to perform hostname completion when a
+word containing a \fB@\fP is being completed (see
+.B Completing
+under
+.SM
+.B READLINE
+above).
+This is enabled by default.
+.TP 8
+.B huponexit
+If set, \fBbash\fP will send
+.SM
+.B SIGHUP
+to all jobs when an interactive login shell exits.
+.TP 8
+.B inherit_errexit
+If set, command substitution inherits the value of the \fBerrexit\fP option,
+instead of unsetting it in the subshell environment.
+This option is enabled when \fIposix mode\fP is enabled.
+.TP 8
+.B interactive_comments
+If set, allow a word beginning with
+.B #
+to cause that word and all remaining characters on that
+line to be ignored in an interactive shell (see
+.SM
+.B COMMENTS
+above).  This option is enabled by default.
+.TP 8
+.B lastpipe
+If set, and job control is not active, the shell runs the last command of
+a pipeline not executed in the background in the current shell environment.
+.TP 8
+.B lithist
+If set, and the
+.B cmdhist
+option is enabled, multi-line commands are saved to the history with
+embedded newlines rather than using semicolon separators where possible.
+.TP 8
+.B localvar_inherit
+If set, local variables inherit the value and attributes of a variable of
+the same name that exists at a previous scope before any new value is
+assigned.  The nameref attribute is not inherited.
+.TP 8
+.B localvar_unset
+If set, calling \fBunset\fP on local variables in previous function scopes
+marks them so subsequent lookups find them unset until that function
+returns. This is identical to the behavior of unsetting local variables
+at the current function scope.
+.TP 8
+.B login_shell
+The shell sets this option if it is started as a login shell (see
+.SM
+.B "INVOCATION"
+above).
+The value may not be changed.
+.TP 8
+.B mailwarn
+If set, and a file that \fBbash\fP is checking for mail has been
+accessed since the last time it was checked, the message ``The mail in
+\fImailfile\fP has been read'' is displayed.
+.TP 8
+.B no_empty_cmd_completion
+If set, and
+.B readline
+is being used,
+.B bash
+will not attempt to search the
+.SM
+.B PATH
+for possible completions when
+completion is attempted on an empty line.
+.TP 8
+.B nocaseglob
+If set,
+.B bash
+matches filenames in a case\-insensitive fashion when performing pathname
+expansion (see
+.B Pathname Expansion
+above).
+.TP 8
+.B nocasematch
+If set,
+.B bash
+matches patterns in a case\-insensitive fashion when performing matching
+while executing \fBcase\fP or \fB[[\fP conditional commands,
+when performing pattern substitution word expansions,
+or when filtering possible completions as part of programmable completion.
+.TP 8
+.B nullglob
+If set,
+.B bash
+allows patterns which match no
+files (see
+.B Pathname Expansion
+above)
+to expand to a null string, rather than themselves.
+.TP 8
+.B progcomp
+If set, the programmable completion facilities (see
+\fBProgrammable Completion\fP above) are enabled.
+This option is enabled by default.
+.TP 8
+.B progcomp_alias
+If set, and programmable completion is enabled, \fBbash\fP treats a command
+name that doesn't have any completions as a possible alias and attempts
+alias expansion. If it has an alias, \fBbash\fP attempts programmable
+completion using the command word resulting from the expanded alias.
+.TP 8
+.B promptvars
+If set, prompt strings undergo
+parameter expansion, command substitution, arithmetic
+expansion, and quote removal after being expanded as described in
+.SM
+.B PROMPTING
+above.  This option is enabled by default.
+.TP 8
+.B restricted_shell
+The shell sets this option if it is started in restricted mode (see
+.SM
+.B "RESTRICTED SHELL"
+below).
+The value may not be changed.
+This is not reset when the startup files are executed, allowing
+the startup files to discover whether or not a shell is restricted.
+.TP 8
+.B shift_verbose
+If set, the
+.B shift
+builtin prints an error message when the shift count exceeds the
+number of positional parameters.
+.TP 8
+.B sourcepath
+If set, the
+\fBsource\fP (\fB.\fP) builtin uses the value of
+.SM
+.B PATH
+to find the directory containing the file supplied as an argument.
+This option is enabled by default.
+.TP 8
+.B xpg_echo
+If set, the \fBecho\fP builtin expands backslash-escape sequences
+by default.
+.RE
+.PD
+.TP
+\fBsuspend\fP [\fB\-f\fP]
+Suspend the execution of this shell until it receives a
+.SM
+.B SIGCONT
+signal.  A login shell cannot be suspended; the
+.B \-f
+option can be used to override this and force the suspension.
+The return status is 0 unless the shell is a login shell and
+.B \-f
+is not supplied, or if job control is not enabled.
+.TP
+\fBtest\fP \fIexpr\fP
+.PD 0
+.TP
+\fB[\fP \fIexpr\fP \fB]\fP
+Return a status of 0 (true) or 1 (false) depending on
+the evaluation of the conditional expression
+.IR expr .
+Each operator and operand must be a separate argument.
+.if \n(zZ=0 Expressions are composed of the primaries described above under
+.if \n(zZ=1 Expressions are composed of the primaries described in the \fBbash\fP manual page under
+.SM
+.BR "CONDITIONAL EXPRESSIONS" .
+\fBtest\fP does not accept any options, nor does it accept and ignore
+an argument of \fB\-\-\fP as signifying the end of options.
+.if t .sp 0.5
+.if n .sp 1
+Expressions may be combined using the following operators, listed
+in decreasing order of precedence.
+The evaluation depends on the number of arguments; see below.
+Operator precedence is used when there are five or more arguments.
+.RS
+.PD 0
+.TP
+.B ! \fIexpr\fP
+True if
+.I expr
+is false.
+.TP
+.B ( \fIexpr\fP )
+Returns the value of \fIexpr\fP.
+This may be used to override the normal precedence of operators.
+.TP
+\fIexpr1\fP \-\fBa\fP \fIexpr2\fP
+True if both
+.I expr1
+and
+.I expr2
+are true.
+.TP
+\fIexpr1\fP \-\fBo\fP \fIexpr2\fP
+True if either
+.I expr1
+or
+.I expr2
+is true.
+.PD
+.PP
+\fBtest\fP and \fB[\fP evaluate conditional
+expressions using a set of rules based on the number of arguments.
+.if t .sp 0.5
+.if n .sp 1
+.PD 0
+.TP
+0 arguments
+The expression is false.
+.TP
+1 argument
+The expression is true if and only if the argument is not null.
+.TP
+2 arguments
+If the first argument is \fB!\fP, the expression is true if and
+only if the second argument is null.
+If the first argument is one of the unary conditional operators listed above
+under
+.SM
+.BR "CONDITIONAL EXPRESSIONS" ,
+the expression is true if the unary test is true.
+If the first argument is not a valid unary conditional operator, the expression
+is false.
+.TP
+3 arguments
+The following conditions are applied in the order listed.
+If the second argument is one of the binary conditional operators listed above
+under
+.SM
+.BR "CONDITIONAL EXPRESSIONS" ,
+the result of the expression is the result of the binary test using
+the first and third arguments as operands.
+The \fB\-a\fP and \fB\-o\fP operators are considered binary operators
+when there are three arguments.
+If the first argument is \fB!\fP, the value is the negation of
+the two-argument test using the second and third arguments.
+If the first argument is exactly \fB(\fP and the third argument is
+exactly \fB)\fP, the result is the one-argument test of the second
+argument.
+Otherwise, the expression is false.
+.TP
+4 arguments
+If the first argument is \fB!\fP, the result is the negation of
+the three-argument expression composed of the remaining arguments.
+Otherwise, the expression is parsed and evaluated according to
+precedence using the rules listed above.
+.TP
+5 or more arguments
+The expression is parsed and evaluated according to precedence
+using the rules listed above.
+.if t .sp 0.5
+.if n .sp 1
+.LP
+When used with \fBtest\fP or \fB[\fP, the \fB<\fP and \fB>\fP operators
+sort lexicographically using ASCII ordering.
+.RE
+.PD
+.TP
+.B times
+Print the accumulated user and system times for the shell and
+for processes run from the shell.  The return status is 0.
+.TP
+\fBtrap\fP [\fB\-lp\fP] [[\fIarg\fP] \fIsigspec\fP ...]
+The command
+.I arg
+is to be read and executed when the shell receives
+signal(s)
+.IR sigspec .
+If
+.I arg
+is absent (and there is a single \fIsigspec\fP) or
+.BR \- ,
+each specified signal is
+reset to its original disposition (the value it had
+upon entrance to the shell).
+If
+.I arg
+is the null string the signal specified by each
+.I sigspec
+is ignored by the shell and by the commands it invokes.
+If
+.I arg
+is not present and
+.B \-p
+has been supplied, then the trap commands associated with each
+.I sigspec
+are displayed.
+If no arguments are supplied or if only
+.B \-p
+is given,
+.B trap
+prints the list of commands associated with each signal.
+The
+.B \-l
+option causes the shell to print a list of signal names and
+their corresponding numbers.
+Each
+.I sigspec
+is either
+a signal name defined in <\fIsignal.h\fP>, or a signal number.
+Signal names are case insensitive and the
+.SM
+.B SIG
+prefix is optional.
+.if t .sp 0.5
+.if n .sp 1
+If a
+.I sigspec
+is
+.SM
+.B EXIT
+(0) the command
+.I arg
+is executed on exit from the shell.
+If a
+.I sigspec
+is
+.SM
+.BR DEBUG ,
+the command
+.I arg
+is executed before every \fIsimple command\fP, \fIfor\fP command,
+\fIcase\fP command, \fIselect\fP command, every arithmetic \fIfor\fP
+command, and before the first command executes in a shell function (see
+.SM
+.B SHELL GRAMMAR
+above).
+Refer to the description of the \fBextdebug\fP option to the
+\fBshopt\fP builtin for details of its effect on the \fBDEBUG\fP trap.
+If a
+.I sigspec
+is
+.SM
+.BR RETURN ,
+the command
+.I arg
+is executed each time a shell function or a script executed with
+the \fB.\fP or \fBsource\fP builtins finishes executing.
+.if t .sp 0.5
+.if n .sp 1
+If a
+.I sigspec
+is
+.SM
+.BR ERR ,
+the command
+.I arg
+is executed whenever
+a pipeline (which may consist of a single simple
+command), a list, or a compound command returns a
+non\-zero exit status,
+subject to the following conditions.
+The
+.SM
+.B ERR
+trap is not executed if the failed
+command is part of the command list immediately following a
+.B while
+or
+.B until
+keyword,
+part of the test in an
+.I if
+statement, part of a command executed in a
+.B &&
+or
+.B ||
+list except the command following the final \fB&&\fP or \fB||\fP,
+any command in a pipeline but the last,
+or if the command's return value is
+being inverted using
+.BR ! .
+These are the same conditions obeyed by the \fBerrexit\fP (\fB\-e\fP) option.
+.if t .sp 0.5
+.if n .sp 1
+Signals ignored upon entry to the shell cannot be trapped or reset.
+Trapped signals that are not being ignored are reset to their original
+values in a subshell or subshell environment when one is created.
+The return status is false if any
+.I sigspec
+is invalid; otherwise
+.B trap
+returns true.
+.TP
+\fBtype\fP [\fB\-aftpP\fP] \fIname\fP [\fIname\fP ...]
+With no options,
+indicate how each
+.I name
+would be interpreted if used as a command name.
+If the
+.B \-t
+option is used,
+.B type
+prints a string which is one of
+.IR alias ,
+.IR keyword ,
+.IR function ,
+.IR builtin ,
+or
+.I file
+if
+.I name
+is an alias, shell reserved word, function, builtin, or disk file,
+respectively.
+If the
+.I name
+is not found, then nothing is printed, and an exit status of false
+is returned.
+If the
+.B \-p
+option is used,
+.B type
+either returns the name of the disk file
+that would be executed if
+.I name
+were specified as a command name,
+or nothing if
+.if t \f(CWtype -t name\fP
+.if n ``type -t name''
+would not return
+.IR file .
+The
+.B \-P
+option forces a
+.SM
+.B PATH
+search for each \fIname\fP, even if
+.if t \f(CWtype -t name\fP
+.if n ``type -t name''
+would not return
+.IR file .
+If a command is hashed,
+.B \-p
+and
+.B \-P
+print the hashed value, which is not necessarily the file that appears
+first in
+.SM
+.BR PATH .
+If the
+.B \-a
+option is used,
+.B type
+prints all of the places that contain
+an executable named
+.IR name .
+This includes aliases and functions,
+if and only if the
+.B \-p
+option is not also used.
+The table of hashed commands is not consulted
+when using
+.BR \-a .
+The
+.B \-f
+option suppresses shell function lookup, as with the \fBcommand\fP builtin.
+.B type
+returns true if all of the arguments are found, false if
+any are not found.
+.TP
+\fBulimit\fP [\fB\-HS\fP] \fB\-a\fP
+.PD 0
+.TP
+\fBulimit\fP [\fB\-HS\fP] [\fB\-bcdefiklmnpqrstuvxPRT\fP [\fIlimit\fP]]
+.PD
+Provides control over the resources available to the shell and to
+processes started by it, on systems that allow such control.
+The \fB\-H\fP and \fB\-S\fP options specify that the hard or soft limit is
+set for the given resource.
+A hard limit cannot be increased by a non-root user once it is set;
+a soft limit may be increased up to the value of the hard limit.
+If neither \fB\-H\fP nor \fB\-S\fP is specified, both the soft and hard
+limits are set.
+The value of
+.I limit
+can be a number in the unit specified for the resource
+or one of the special values
+.BR hard ,
+.BR soft ,
+or
+.BR unlimited ,
+which stand for the current hard limit, the current soft limit, and
+no limit, respectively.
+If
+.I limit
+is omitted, the current value of the soft limit of the resource is
+printed, unless the \fB\-H\fP option is given.  When more than one
+resource is specified, the limit name and unit, if appropriate,
+are printed before the value.
+Other options are interpreted as follows:
+.RS
+.PD 0
+.TP
+.B \-a
+All current limits are reported; no limits are set
+.TP
+.B \-b
+The maximum socket buffer size
+.TP
+.B \-c
+The maximum size of core files created
+.TP
+.B \-d
+The maximum size of a process's data segment
+.TP
+.B \-e
+The maximum scheduling priority ("nice")
+.TP
+.B \-f
+The maximum size of files written by the shell and its children
+.TP
+.B \-i
+The maximum number of pending signals
+.TP
+.B \-k
+The maximum number of kqueues that may be allocated
+.TP
+.B \-l
+The maximum size that may be locked into memory
+.TP
+.B \-m
+The maximum resident set size (many systems do not honor this limit)
+.TP
+.B \-n
+The maximum number of open file descriptors (most systems do not
+allow this value to be set)
+.TP
+.B \-p
+The pipe size in 512-byte blocks (this may not be set)
+.TP
+.B \-q
+The maximum number of bytes in POSIX message queues
+.TP
+.B \-r
+The maximum real-time scheduling priority
+.TP
+.B \-s
+The maximum stack size
+.TP
+.B \-t
+The maximum amount of cpu time in seconds
+.TP
+.B \-u
+The maximum number of processes available to a single user
+.TP
+.B \-v
+The maximum amount of virtual memory available to the shell and, on
+some systems, to its children
+.TP
+.B \-x
+The maximum number of file locks
+.TP
+.B \-P
+The maximum number of pseudoterminals
+.TP
+.B \-R
+The maximum time a real-time process can run before blocking, in microseconds
+.TP
+.B \-T
+The maximum number of threads
+.PD
+.PP
+If
+.I limit
+is given, and the
+.B \-a
+option is not used,
+\fIlimit\fP is the new value of the specified resource.
+If no option is given, then
+.B \-f
+is assumed.  Values are in 1024-byte increments, except for
+.BR \-t ,
+which is in seconds;
+.BR \-R ,
+which is in microseconds;
+.BR \-p ,
+which is in units of 512-byte blocks;
+.BR \-P ,
+.BR \-T ,
+.BR \-b ,
+.BR \-k ,
+.BR \-n ,
+and
+.BR \-u ,
+which are unscaled values;
+and, when in posix mode,
+.B \-c
+and
+.BR \-f ,
+which are in 512-byte increments.
+The return status is 0 unless an invalid option or argument is supplied,
+or an error occurs while setting a new limit.
+.RE
+.TP
+\fBumask\fP [\fB\-p\fP] [\fB\-S\fP] [\fImode\fP]
+The user file-creation mask is set to
+.IR mode .
+If
+.I mode
+begins with a digit, it
+is interpreted as an octal number; otherwise
+it is interpreted as a symbolic mode mask similar
+to that accepted by
+.IR chmod (1).
+If
+.I mode
+is omitted, the current value of the mask is printed.
+The
+.B \-S
+option causes the mask to be printed in symbolic form; the
+default output is an octal number.
+If the
+.B \-p
+option is supplied, and
+.I mode
+is omitted, the output is in a form that may be reused as input.
+The return status is 0 if the mode was successfully changed or if
+no \fImode\fP argument was supplied, and false otherwise.
+.TP
+\fBunalias\fP [\-\fBa\fP] [\fIname\fP ...]
+Remove each \fIname\fP from the list of defined aliases.  If
+.B \-a
+is supplied, all alias definitions are removed.  The return
+value is true unless a supplied
+.I name
+is not a defined alias.
+.TP
+\fBunset\fP [\-\fBfv\fP] [\-\fBn\fP] [\fIname\fP ...]
+For each
+.IR name ,
+remove the corresponding variable or function.
+If the
+.B \-v
+option is given, each
+.I name
+refers to a shell variable, and that variable is removed.
+Read-only variables may not be unset.
+If
+.B \-f
+is specified, each
+.I name
+refers to a shell function, and the function definition
+is removed.
+If the
+.B \-n
+option is supplied, and \fIname\fP is a variable with the \fInameref\fP
+attribute, \fIname\fP will be unset rather than the variable it
+references.
+\fB\-n\fP has no effect if the \fB\-f\fP option is supplied.
+If no options are supplied, each \fIname\fP refers to a variable; if
+there is no variable by that name, a function with that name, if any, is
+unset.
+Each unset variable or function is removed from the environment
+passed to subsequent commands.
+If any of
+.SM
+.BR BASH_ALIASES ,
+.SM
+.BR BASH_ARGV0 ,
+.SM
+.BR BASH_CMDS ,
+.SM
+.BR BASH_COMMAND ,
+.SM
+.BR BASH_SUBSHELL ,
+.SM
+.BR BASHPID ,
+.SM
+.BR COMP_WORDBREAKS ,
+.SM
+.BR DIRSTACK ,
+.SM
+.BR EPOCHREALTIME ,
+.SM
+.BR EPOCHSECONDS ,
+.SM
+.BR FUNCNAME ,
+.SM
+.BR GROUPS ,
+.SM
+.BR HISTCMD ,
+.SM
+.BR LINENO ,
+.SM
+.BR RANDOM ,
+.SM
+.BR SECONDS ,
+or
+.SM
+.B SRANDOM
+are unset, they lose their special properties, even if they are
+subsequently reset.  The exit status is true unless a
+.I name
+is readonly.
+.TP
+\fBwait\fP [\fB\-fn\fP] [\fP\-p\fP \fIvarname\fP] [\fIid ...\fP]
+Wait for each specified child process and return its termination status.
+Each
+.I id
+may be a process
+ID or a job specification; if a job spec is given, all processes
+in that job's pipeline are waited for.  If
+.I id
+is not given,
+\fBwait\fP waits for all running background jobs and
+the last-executed process substitution, if its process id is the same as
+\fB$!\fP,
+and the return status is zero.
+If the \fB\-n\fP option is supplied,
+\fBwait\fP waits for a single job
+from the list of \fIid\fPs or, if no \fIid\fPs are supplied, any job,
+to complete and returns its exit status.
+If none of the supplied arguments is a child of the shell, or if no arguments
+are supplied and the shell has no unwaited-for children, the exit status
+is 127.
+If the \fB\-p\fP option is supplied, the process or job identifier of the job
+for which the exit status is returned is assigned to the variable
+\fIvarname\fP named by the option argument.
+The variable will be unset initially, before any assignment.
+This is useful only when the \fB\-n\fP option is supplied.
+Supplying the \fB\-f\fP option, when job control is enabled,
+forces \fBwait\fP to wait for \fIid\fP to terminate before returning
+its status, instead of returning when it changes status.
+If
+.I id
+specifies a non-existent process or job, the return status is
+127.  Otherwise, the return status is the exit status of the last
+process or job waited for.
+.SH "SHELL COMPATIBILITY MODE"
+Bash-4.0 introduced the concept of a `shell compatibility level', specified
+as a set of options to the shopt builtin
+.BR compat31 ,
+.BR compat32 ,
+.BR compat40 ,
+.BR compat41 ,
+and so on).
+There is only one current
+compatibility level -- each option is mutually exclusive.
+The compatibility level is intended to allow users to select behavior
+from previous versions that is incompatible with newer versions
+while they migrate scripts to use current features and
+behavior. It's intended to be a temporary solution.
+.PP
+This section does not mention behavior that is standard for a particular
+version (e.g., setting \fBcompat32\fP means that quoting the rhs of the regexp
+matching operator quotes special regexp characters in the word, which is
+default behavior in bash-3.2 and above). 
+.PP
+If a user enables, say, \fBcompat32\fP, it may affect the behavior of other
+compatibility levels up to and including the current compatibility level.
+The idea is that each compatibility level controls behavior that changed
+in that version of \fBbash\fP,
+but that behavior may have been present in earlier versions.
+For instance, the change to use locale-based comparisons with the \fB[[\fP
+command came in bash-4.1, and earlier versions used ASCII-based comparisons,
+so enabling \fBcompat32\fP will enable ASCII-based comparisons as well.
+That granularity may not be sufficient for
+all uses, and as a result users should employ compatibility levels carefully.
+Read the documentation for a particular feature to find out the
+current behavior.
+.PP
+Bash-4.3 introduced a new shell variable:
+.SM
+.BR BASH_COMPAT .
+The value assigned
+to this variable (a decimal version number like 4.2, or an integer
+corresponding to the \fBcompat\fP\fINN\fP option, like 42) determines the
+compatibility level.
+.PP
+Starting with bash-4.4, Bash has begun deprecating older compatibility
+levels.
+Eventually, the options will be removed in favor of
+.SM
+.BR BASH_COMPAT .
+.PP
+Bash-5.0 is the final version for which there will be an individual shopt
+option for the previous version. Users should use
+.SM
+.B BASH_COMPAT
+on bash-5.0 and later versions.
+.PP
+The following table describes the behavior changes controlled by each
+compatibility level setting.
+The \fBcompat\fP\fINN\fP tag is used as shorthand for setting the
+compatibility level
+to \fINN\fP using one of the following mechanisms.
+For versions prior to bash-5.0, the compatibility level may be set using
+the corresponding \fBcompat\fP\fINN\fP shopt option.
+For bash-4.3 and later versions, the
+.SM
+.B BASH_COMPAT
+variable is preferred,
+and it is required for bash-5.1 and later versions.
+.TP
+\fBcompat31\fP
+.PD 0
+.RS
+.IP \(bu
+quoting the rhs of the \fB[[\fP command's regexp matching operator (=~)
+has no special effect
+.RE
+.PD
+.TP
+\fBcompat32\fP
+.PD 0
+.RS
+.IP \(bu
+interrupting a command list such as "a ; b ; c" causes the execution
+of the next command in the list (in bash-4.0 and later versions,
+the shell acts as if it received the interrupt, so
+interrupting one command in a list aborts the execution of the
+entire list)
+.RE
+.PD
+.TP
+\fBcompat40\fP
+.PD 0
+.RS
+.IP \(bu
+the \fB<\fP and \fB>\fP operators to the \fB[[\fP command do not
+consider the current locale when comparing strings; they use ASCII
+ordering.
+Bash versions prior to bash-4.1 use ASCII collation and
+.IR strcmp (3);
+bash-4.1 and later use the current locale's collation sequence and
+.IR strcoll (3).
+.RE
+.PD
+.TP
+\fBcompat41\fP
+.PD 0
+.RS
+.IP \(bu
+in \fIposix\fP mode, \fBtime\fP may be followed by options and still be
+recognized as a reserved word (this is POSIX interpretation 267)
+.IP \(bu
+in \fIposix\fP mode, the parser requires that an even number of single
+quotes occur in the \fIword\fP portion of a double-quoted
+parameter expansion and treats them specially, so that characters within
+the single quotes are considered quoted
+(this is POSIX interpretation 221)
+.RE
+.PD
+.TP
+\fBcompat42\fP
+.PD 0
+.RS
+.IP \(bu
+the replacement string in double-quoted pattern substitution does not
+undergo quote removal, as it does in versions after bash-4.2
+.IP \(bu
+in posix mode, single quotes are considered special when expanding
+the \fIword\fP portion of a double-quoted parameter expansion
+and can be used to quote a closing brace or other special character
+(this is part of POSIX interpretation 221);
+in later versions, single quotes
+are not special within double-quoted word expansions
+.RE
+.PD
+.TP
+\fBcompat43\fP
+.PD 0
+.RS
+.IP \(bu
+the shell does not print a warning message if an attempt is made to
+use a quoted compound assignment as an argument to declare
+(declare -a foo='(1 2)'). Later versions warn that this usage is
+deprecated
+.IP \(bu
+word expansion errors are considered non-fatal errors that cause the
+current command to fail, even in posix mode
+(the default behavior is to make them fatal errors that cause the shell
+to exit)
+.IP \(bu
+when executing a shell function, the loop state (while/until/etc.)
+is not reset, so \fBbreak\fP or \fBcontinue\fP in that function will break
+or continue loops in the calling context. Bash-4.4 and later reset
+the loop state to prevent this
+.RE
+.PD
+.TP
+\fBcompat44\fP
+.PD 0
+.RS
+.IP \(bu
+the shell sets up the values used by
+.SM
+.B BASH_ARGV
+and
+.SM
+.B BASH_ARGC
+so they can expand to the shell's positional parameters even if extended
+debugging mode is not enabled
+.IP \(bu
+a subshell inherits loops from its parent context, so \fBbreak\fP
+or \fBcontinue\fP will cause the subshell to exit.
+Bash-5.0 and later reset the loop state to prevent the exit
+.IP \(bu
+variable assignments preceding builtins like \fBexport\fP and \fBreadonly\fP
+that set attributes continue to affect variables with the same
+name in the calling environment even if the shell is not in posix
+mode
+.RE
+.PD
+.TP
+\fBcompat50\fP
+.PD 0
+.RS
+.IP \(bu
+Bash-5.1 changed the way
+.SM
+.B $RANDOM
+is generated to introduce slightly
+more randomness. If the shell compatibility level is set to 50 or
+lower, it reverts to the method from bash-5.0 and previous versions,
+so seeding the random number generator by assigning a value to
+.SM
+.B RANDOM
+will produce the same sequence as in bash-5.0
+.IP \(bu
+If the command hash table is empty, bash versions prior to bash-5.1
+printed an informational message to that effect, even when producing
+output that can be reused as input. Bash-5.1 suppresses that message
+when the \fB\-l\fP option is supplied.
+.RE
+.PD
+.\" bash_builtins
+.if \n(zZ=1 .ig zZ
+.SH "RESTRICTED SHELL"
+.\" rbash.1
+.zY
+.PP
+If
+.B bash
+is started with the name
+.BR rbash ,
+or the
+.B \-r
+option is supplied at invocation,
+the shell becomes restricted.
+A restricted shell is used to
+set up an environment more controlled than the standard shell.
+It behaves identically to
+.B bash
+with the exception that the following are disallowed or not performed:
+.IP \(bu
+changing directories with \fBcd\fP
+.IP \(bu
+setting or unsetting the values of
+.SM
+.BR SHELL ,
+.SM
+.BR PATH ,
+.SM
+.BR HISTFILE ,
+.SM
+.BR ENV ,
+or
+.SM
+.B BASH_ENV
+.IP \(bu
+specifying command names containing
+.B /
+.IP \(bu
+specifying a filename containing a
+.B /
+as an argument to the
+.B .
+builtin command
+.IP \(bu
+specifying a filename containing a slash as an argument to the
+.B history
+builtin command
+.IP \(bu
+specifying a filename containing a slash as an argument to the
+.B \-p
+option to the
+.B hash
+builtin command
+.IP \(bu
+importing function definitions from the shell environment at startup
+.IP \(bu
+parsing the value of
+.SM
+.B SHELLOPTS
+from the shell environment at startup
+.IP \(bu
+redirecting output using the >, >|, <>, >&, &>, and >> redirection operators
+.IP \(bu
+using the
+.B exec
+builtin command to replace the shell with another command
+.IP \(bu
+adding or deleting builtin commands with the
+.B \-f
+and
+.B \-d
+options to the
+.B enable
+builtin command
+.IP \(bu
+using the \fBenable\fP builtin command to enable disabled shell builtins
+.IP \(bu
+specifying the
+.B \-p
+option to the
+.B command
+builtin command
+.IP \(bu
+turning off restricted mode with
+\fBset +r\fP or \fBset +o restricted\fP.
+.PP
+These restrictions are enforced after any startup files are read.
+.PP
+.ie \n(zY=1 When a command that is found to be a shell script is executed,
+.el \{ When a command that is found to be a shell script is executed
+(see
+.SM
+.B "COMMAND EXECUTION"
+above),
+\}
+.B rbash
+turns off any restrictions in the shell spawned to execute the
+script.
+.\" end of rbash.1
+.if \n(zY=1 .ig zY
+.SH "SEE ALSO"
+.PD 0
+.TP
+\fIBash Reference Manual\fP, Brian Fox and Chet Ramey
+.TP
+\fIThe Gnu Readline Library\fP, Brian Fox and Chet Ramey
+.TP
+\fIThe Gnu History Library\fP, Brian Fox and Chet Ramey
+.TP
+\fIPortable Operating System Interface (POSIX) Part 2: Shell and Utilities\fP, IEEE --
+http://pubs.opengroup.org/onlinepubs/9699919799/
+.TP
+http://tiswww.case.edu/~chet/bash/POSIX -- a description of posix mode
+.TP
+\fIsh\fP(1), \fIksh\fP(1), \fIcsh\fP(1)
+.TP
+\fIemacs\fP(1), \fIvi\fP(1)
+.TP
+\fIreadline\fP(3)
+.PD
+.SH FILES
+.PD 0
+.TP
+.FN /bin/bash
+The \fBbash\fP executable
+.TP
+.FN /etc/profile
+The systemwide initialization file, executed for login shells
+.TP
+.FN ~/.bash_profile
+The personal initialization file, executed for login shells
+.TP
+.FN ~/.bashrc
+The individual per-interactive-shell startup file
+.TP
+.FN ~/.bash_logout
+The individual login shell cleanup file, executed when a login shell exits
+.TP
+.FN ~/.inputrc
+Individual \fIreadline\fP initialization file
+.PD
+.SH AUTHORS
+Brian Fox, Free Software Foundation
+.br
+bfox@gnu.org
+.PP
+Chet Ramey, Case Western Reserve University
+.br
+chet.ramey@case.edu
+.SH BUG REPORTS
+If you find a bug in
+.B bash,
+you should report it.  But first, you should
+make sure that it really is a bug, and that it appears in the latest
+version of
+.BR bash .
+The latest version is always available from
+\fIftp://ftp.gnu.org/pub/gnu/bash/\fP.
+.PP
+Once you have determined that a bug actually exists, use the
+.I bashbug
+command to submit a bug report.
+If you have a fix, you are encouraged to mail that as well!
+Suggestions and `philosophical' bug reports may be mailed
+to \fIbug-bash@gnu.org\fP or posted to the Usenet
+newsgroup
+.BR gnu.bash.bug .
+.PP
+ALL bug reports should include:
+.PP
+.PD 0
+.TP 20
+The version number of \fBbash\fR
+.TP
+The hardware and operating system
+.TP
+The compiler used to compile
+.TP
+A description of the bug behaviour
+.TP
+A short script or `recipe' which exercises the bug
+.PD
+.PP
+.I bashbug
+inserts the first three items automatically into the template
+it provides for filing a bug report.
+.PP
+Comments and bug reports concerning
+this manual page should be directed to
+.IR chet.ramey@case.edu .
+.SH BUGS
+It's too big and too slow.
+.PP
+There are some subtle differences between
+.B bash
+and traditional versions of
+.BR sh ,
+mostly because of the
+.SM
+.B POSIX
+specification.
+.PP
+Aliases are confusing in some uses.
+.PP
+Shell builtin commands and functions are not stoppable/restartable.
+.PP
+Compound commands and command sequences of the form `a ; b ; c'
+are not handled gracefully when process suspension is attempted.
+When a process is stopped, the shell immediately executes the next
+command in the sequence.
+It suffices to place the sequence of commands between
+parentheses to force it into a subshell, which may be stopped as
+a unit.
+.PP
+Array variables may not (yet) be exported.
+.PP
+There may be only one active coprocess at a time.
+.zZ
+.zY
diff --git a/doc/bash.html b/doc/bash.html
new file mode 100644
index 0000000..adb9e76
--- /dev/null
+++ b/doc/bash.html
@@ -0,0 +1,14369 @@
+<HTML><HEAD>
+<TITLE>BASH(1) Manual Page</TITLE>
+</HEAD>
+<BODY><TABLE WIDTH=100%>
+<TR>
+<TH ALIGN=LEFT width=33%>BASH(1)<TH ALIGN=CENTER width=33%>2020 October 29<TH ALIGN=RIGHT width=33%>BASH(1)
+</TR>
+</TABLE>
+<BR><A HREF="#index">Index</A>
+<HR>
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+<A NAME="lbAB">&nbsp;</A>
+<H3>NAME</H3>
+
+bash - GNU Bourne-Again SHell
+<A NAME="lbAC">&nbsp;</A>
+<H3>SYNOPSIS</H3>
+
+<B>bash</B>
+
+[options]
+[command_string | file]
+<A NAME="lbAD">&nbsp;</A>
+<H3>COPYRIGHT</H3>
+
+
+Bash is Copyright &#169; 1989-2020 by the Free Software Foundation, Inc.
+<A NAME="lbAE">&nbsp;</A>
+<H3>DESCRIPTION</H3>
+
+<B>Bash</B>
+
+is an <B>sh</B>-compatible command language interpreter that
+executes commands read from the standard input or from a file.
+<B>Bash</B>
+
+also incorporates useful features from the <I>Korn</I> and <I>C</I>
+shells (<B>ksh</B> and <B>csh</B>).
+<P>
+
+<B>Bash</B>
+
+is intended to be a conformant implementation of the
+Shell and Utilities portion of the IEEE POSIX specification
+(IEEE Standard 1003.1).
+<B>Bash</B>
+
+can be configured to be POSIX-conformant by default.
+<A NAME="lbAF">&nbsp;</A>
+<H3>OPTIONS</H3>
+
+All of the single-character shell options documented in the
+description of the <B>set</B> builtin command, including <B>-o</B>,
+can be used as options when the shell is invoked.
+In addition, <B>bash</B>
+interprets the following options when it is invoked:
+<P>
+
+
+<DL COMPACT>
+<DT><B>-c</B>
+
+<DD>
+If the
+<B>-c</B>
+
+option is present, then commands are read from the first non-option argument
+<I>command_string</I>.
+
+If there are arguments after the
+<I>command_string</I>,
+
+the first argument is assigned to
+<B>$0</B>
+
+and any remaining arguments are assigned to the positional parameters.
+The assignment to
+<B>$0</B>
+
+sets the name of the shell, which is used in warning and error messages.
+<DT><B>-i</B>
+
+<DD>
+If the
+<B>-i</B>
+
+option is present, the shell is
+<I>interactive</I>.
+
+<DT><B>-l</B>
+
+<DD>
+Make
+<B>bash</B>
+
+act as if it had been invoked as a login shell (see
+<FONT SIZE=-1><B>INVOCATION</B>
+
+</FONT>
+below).
+<DT><B>-r</B>
+
+<DD>
+If the
+<B>-r</B>
+
+option is present, the shell becomes
+<I>restricted</I>
+
+(see
+<FONT SIZE=-1><B>RESTRICTED SHELL</B>
+
+</FONT>
+below).
+<DT><B>-s</B>
+
+<DD>
+If the
+<B>-s</B>
+
+option is present, or if no arguments remain after option
+processing, then commands are read from the standard input.
+This option allows the positional parameters to be set
+when invoking an interactive shell or when reading input
+through a pipe.
+<DT><B>-D</B>
+
+<DD>
+A list of all double-quoted strings preceded by <B>$</B>
+is printed on the standard output.
+These are the strings that
+are subject to language translation when the current locale
+is not <B>C</B> or <B>POSIX</B>.
+This implies the <B>-n</B> option; no commands will be executed.
+<DT><B>[-+]O [</B><I>shopt_option</I>]
+
+<DD>
+<I>shopt_option</I> is one of the shell options accepted by the
+<B>shopt</B> builtin (see
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>
+
+</FONT>
+below).
+If <I>shopt_option</I> is present, <B>-O</B> sets the value of that option;
+<B>+O</B> unsets it.
+If <I>shopt_option</I> is not supplied, the names and values of the shell
+options accepted by <B>shopt</B> are printed on the standard output.
+If the invocation option is <B>+O</B>, the output is displayed in a format
+that may be reused as input.
+<DT><B>--</B>
+
+<DD>
+A
+<B>--</B>
+
+signals the end of options and disables further option processing.
+Any arguments after the
+<B>--</B>
+
+are treated as filenames and arguments.  An argument of
+<B>-</B>
+
+is equivalent to <B>--</B>.
+
+</DL>
+<P>
+
+<B>Bash</B>
+
+also interprets a number of multi-character options.
+These options must appear on the command line before the
+single-character options to be recognized.
+<P>
+
+
+<DL COMPACT>
+<DT><B>--debugger</B>
+
+<DD>
+Arrange for the debugger profile to be executed before the shell
+starts.
+Turns on extended debugging mode (see the description of the
+<B>extdebug</B>
+
+option to the
+<B>shopt</B>
+
+builtin below).
+<DT><B>--dump-po-strings</B>
+
+<DD>
+Equivalent to <B>-D</B>, but the output is in the GNU <I>gettext</I>
+<B>po</B> (portable object) file format.
+<DT><B>--dump-strings</B>
+
+<DD>
+Equivalent to <B>-D</B>.
+<DT><B>--help</B>
+
+<DD>
+Display a usage message on standard output and exit successfully.
+<DT><B>--init-file</B> <I>file</I><DD>
+
+<DT><B>--rcfile</B> <I>file</I><DD>
+
+Execute commands from
+<I>file</I>
+
+instead of the standard personal initialization file
+<A HREF="file:~/.bashrc"><I>~/.bashrc</I></A>
+
+if the shell is interactive (see
+<FONT SIZE=-1><B>INVOCATION</B>
+
+</FONT>
+below).
+<DT><B>--login</B>
+
+<DD>
+Equivalent to <B>-l</B>.
+<DT><B>--noediting</B>
+
+<DD>
+Do not use the GNU
+<B>readline</B>
+
+library to read command lines when the shell is interactive.
+<DT><B>--noprofile</B>
+
+<DD>
+Do not read either the system-wide startup file
+
+<A HREF="file:/etc/profile"><I>/etc/profile</I></A>
+
+or any of the personal initialization files
+<A HREF="file:~/.bash_profile"><I>~/.bash_profile</I></A>,
+
+<A HREF="file:~/.bash_login"><I>~/.bash_login</I></A>,
+
+or
+<A HREF="file:~/.profile"><I>~/.profile</I></A>.
+
+By default,
+<B>bash</B>
+
+reads these files when it is invoked as a login shell (see
+<FONT SIZE=-1><B>INVOCATION</B>
+
+</FONT>
+below).
+<DT><B>--norc</B>
+
+<DD>
+Do not read and execute the personal initialization file
+<A HREF="file:~/.bashrc"><I>~/.bashrc</I></A>
+
+if the shell is interactive.
+This option is on by default if the shell is invoked as
+<B>sh</B>.
+
+<DT><B>--posix</B>
+
+<DD>
+Change the behavior of <B>bash</B> where the default operation differs
+from the POSIX standard to match the standard (<I>posix mode</I>).
+See
+<FONT SIZE=-1><B>SEE ALSO</B>
+
+</FONT>
+below for a reference to a document that details how posix mode affects
+bash's behavior.
+<DT><B>--restricted</B>
+
+<DD>
+The shell becomes restricted (see
+<FONT SIZE=-1><B>RESTRICTED SHELL</B>
+
+</FONT>
+below).
+<DT><B>--verbose</B>
+
+<DD>
+Equivalent to <B>-v</B>.
+<DT><B>--version</B>
+
+<DD>
+Show version information for this instance of
+<B>bash</B>
+
+on the standard output and exit successfully.
+
+</DL>
+<A NAME="lbAG">&nbsp;</A>
+<H3>ARGUMENTS</H3>
+
+If arguments remain after option processing, and neither the
+<B>-c</B>
+
+nor the
+<B>-s</B>
+
+option has been supplied, the first argument is assumed to
+be the name of a file containing shell commands.
+If
+<B>bash</B>
+
+is invoked in this fashion,
+<B>$0</B>
+
+is set to the name of the file, and the positional parameters
+are set to the remaining arguments.
+<B>Bash</B>
+
+reads and executes commands from this file, then exits.
+<B>Bash</B>'s exit status is the exit status of the last command
+executed in the script.
+If no commands are executed, the exit status is 0.
+An attempt is first made to open the file in the current directory, and,
+if no file is found, then the shell searches the directories in
+<FONT SIZE=-1><B>PATH</B>
+
+</FONT>
+for the script.
+<A NAME="lbAH">&nbsp;</A>
+<H3>INVOCATION</H3>
+
+A <I>login shell</I> is one whose first character of argument zero is a
+<B>-</B>,
+
+or one started with the
+<B>--login</B>
+
+option.
+<P>
+
+An <I>interactive</I> shell is one started without non-option arguments
+(unless <B>-s</B> is specified)
+and without the
+<B>-c</B>
+
+option
+whose standard input and error are
+both connected to terminals (as determined by
+<I>isatty</I>(3)),
+
+or one started with the
+<B>-i</B>
+
+option.
+<FONT SIZE=-1><B>PS1</B>
+
+</FONT>
+is set and
+<B>$-</B>
+
+includes
+<B>i</B>
+
+if
+<B>bash</B>
+
+is interactive,
+allowing a shell script or a startup file to test this state.
+<P>
+
+The following paragraphs describe how
+<B>bash</B>
+
+executes its startup files.
+If any of the files exist but cannot be read,
+<B>bash</B>
+
+reports an error.
+Tildes are expanded in filenames as described below under
+<B>Tilde Expansion</B>
+
+in the
+<FONT SIZE=-1><B>EXPANSION</B>
+
+</FONT>
+section.
+<P>
+
+When
+<B>bash</B>
+
+is invoked as an interactive login shell, or as a non-interactive shell
+with the <B>--login</B> option, it first reads and
+executes commands from the file <A HREF="file:/etc/profile"><I>/etc/profile</I></A>, if that
+file exists.
+After reading that file, it looks for <A HREF="file:~/.bash_profile"><I>~/.bash_profile</I></A>,
+<A HREF="file:~/.bash_login"><I>~/.bash_login</I></A>, and <A HREF="file:~/.profile"><I>~/.profile</I></A>, in that order, and reads
+and executes commands from the first one that exists and is readable.
+The
+<B>--noprofile</B>
+
+option may be used when the shell is started to inhibit this behavior.
+<P>
+
+When an interactive login shell exits,
+or a non-interactive login shell executes the <B>exit</B> builtin command,
+<B>bash</B>
+
+reads and executes commands from the file <A HREF="file:~/.bash_logout"><I>~/.bash_logout</I></A>, if it
+exists.
+<P>
+
+When an interactive shell that is not a login shell is started,
+<B>bash</B>
+
+reads and executes commands from <A HREF="file:~/.bashrc"><I>~/.bashrc</I></A>, if that file exists.
+This may be inhibited by using the
+<B>--norc</B>
+
+option.
+The <B>--rcfile</B> <I>file</I> option will force
+<B>bash</B>
+
+to read and execute commands from <I>file</I> instead of <A HREF="file:~/.bashrc"><I>~/.bashrc</I></A>.
+<P>
+
+When
+<B>bash</B>
+
+is started non-interactively, to run a shell script, for example, it
+looks for the variable
+<FONT SIZE=-1><B>BASH_ENV</B>
+
+</FONT>
+in the environment, expands its value if it appears there, and uses the
+expanded value as the name of a file to read and execute.
+<B>Bash</B>
+
+behaves as if the following command were executed:
+<P>
+<DL COMPACT><DT><DD>
+<TT>if [ -n &quot;$BASH_ENV&quot; ]; then . &quot;$BASH_ENV&quot;; fi</TT>
+
+</DL>
+
+<P>
+but the value of the
+<FONT SIZE=-1><B>PATH</B>
+
+</FONT>
+variable is not used to search for the filename.
+<P>
+
+If
+<B>bash</B>
+
+is invoked with the name
+<B>sh</B>,
+
+it tries to mimic the startup behavior of historical versions of
+<B>sh</B>
+
+as closely as possible,
+while conforming to the POSIX standard as well.
+When invoked as an interactive login shell, or a non-interactive
+shell with the <B>--login</B> option, it first attempts to
+read and execute commands from
+<A HREF="file:/etc/profile"><I>/etc/profile</I></A>
+
+and
+<A HREF="file:~/.profile"><I>~/.profile</I></A>,
+
+in that order.
+The
+<B>--noprofile</B>
+
+option may be used to inhibit this behavior.
+When invoked as an interactive shell with the name
+<B>sh</B>,
+
+<B>bash</B>
+
+looks for the variable
+<FONT SIZE=-1><B>ENV</B>,
+
+</FONT>
+expands its value if it is defined, and uses the
+expanded value as the name of a file to read and execute.
+Since a shell invoked as
+<B>sh</B>
+
+does not attempt to read and execute commands from any other startup
+files, the
+<B>--rcfile</B>
+
+option has no effect.
+A non-interactive shell invoked with the name
+<B>sh</B>
+
+does not attempt to read any other startup files.
+When invoked as
+<B>sh</B>,
+
+<B>bash</B>
+
+enters
+<I>posix</I>
+
+mode after the startup files are read.
+<P>
+
+When
+<B>bash</B>
+
+is started in
+<I>posix</I>
+
+mode, as with the
+<B>--posix</B>
+
+command line option, it follows the POSIX standard for startup files.
+In this mode, interactive shells expand the
+<FONT SIZE=-1><B>ENV</B>
+
+</FONT>
+variable and commands are read and executed from the file
+whose name is the expanded value.
+No other startup files are read.
+<P>
+
+<B>Bash</B>
+
+attempts to determine when it is being run with its standard input
+connected to a network connection, as when executed by the remote shell
+daemon, usually <I>rshd</I>, or the secure shell daemon <I>sshd</I>.
+If
+<B>bash</B>
+
+determines it is being run in this fashion, it reads and executes
+commands from <A HREF="file:~/.bashrc"><I>~/.bashrc</I></A>, if that file exists and is readable.
+It will not do this if invoked as <B>sh</B>.
+The
+<B>--norc</B>
+
+option may be used to inhibit this behavior, and the
+<B>--rcfile</B>
+
+option may be used to force another file to be read, but neither
+<I>rshd</I> nor <I>sshd</I> generally invoke the shell with those options
+or allow them to be specified.
+<P>
+
+If the shell is started with the effective user (group) id not equal to the
+real user (group) id, and the <B>-p</B> option is not supplied, no startup
+files are read, shell functions are not inherited from the environment, the
+<FONT SIZE=-1><B>SHELLOPTS</B>,
+
+</FONT>
+<FONT SIZE=-1><B>BASHOPTS</B>,
+
+</FONT>
+<FONT SIZE=-1><B>CDPATH</B>,
+
+</FONT>
+and
+<FONT SIZE=-1><B>GLOBIGNORE</B>
+
+</FONT>
+variables, if they appear in the environment, are ignored,
+and the effective user id is set to the real user id.
+If the <B>-p</B> option is supplied at invocation, the startup behavior is
+the same, but the effective user id is not reset.
+<A NAME="lbAI">&nbsp;</A>
+<H3>DEFINITIONS</H3>
+
+The following definitions are used throughout the rest of this
+document.
+
+<DL COMPACT>
+<DT><B>blank</B>
+
+<DD>
+A space or tab.
+<DT><B>word</B>
+
+<DD>
+A sequence of characters considered as a single unit by the shell.
+Also known as a
+<B>token</B>.
+
+<DT><B>name</B>
+
+<DD>
+A
+<I>word</I>
+
+consisting only of alphanumeric characters and underscores, and
+beginning with an alphabetic character or an underscore.  Also
+referred to as an
+<B>identifier</B>.
+
+<DT><B>metacharacter</B>
+
+<DD>
+A character that, when unquoted, separates words.  One of the following:
+<BR>
+
+<DL COMPACT><DT><DD>
+<P>
+
+<B>|  &amp;  ;  (  )  &lt;  &gt;  space  tab  newline</B>
+
+</DL>
+
+<DT><B>control operator</B>
+
+<DD>
+A <I>token</I> that performs a control function.  It is one of the following
+symbols:
+<DL COMPACT><DT><DD>
+<P>
+
+<B>||  &amp;  &amp;&amp;  ;  ;;  ;&amp;  ;;&amp;  (  )  |  |&amp;    &lt;newline&gt;</B>
+
+</DL>
+
+
+</DL>
+<A NAME="lbAJ">&nbsp;</A>
+<H3>RESERVED WORDS</H3>
+
+<I>Reserved words</I> are words that have a special meaning to the shell.
+The following words are recognized as reserved when unquoted and either
+the first word of a command (see
+<FONT SIZE=-1><B>SHELL GRAMMAR</B>
+
+</FONT>
+below), the third word of a
+<B>case</B>
+
+or
+<B>select</B>
+
+command
+(only <B>in</B> is valid), or the third word of a
+<B>for</B>
+
+command (only <B>in</B> and <B>do</B> are valid):
+<DL COMPACT><DT><DD>
+
+<P>
+
+<B>
+</B>
+
+!    case    coproc    do    done    elif    else    esac    fi    for    function    if    in    select    then    until    while    {    }    time    [[    ]]
+</DL>
+
+
+<A NAME="lbAK">&nbsp;</A>
+<H3>SHELL GRAMMAR</H3>
+
+<A NAME="lbAL">&nbsp;</A>
+<H4>Simple Commands</H4>
+
+A <I>simple command</I> is a sequence of optional variable assignments
+followed by <B>blank</B>-separated words and redirections, and
+terminated by a <I>control operator</I>.  The first word
+specifies the command to be executed, and is passed as argument zero.
+The remaining words are passed as arguments to the invoked command.
+<P>
+
+The return value of a <I>simple command</I> is its exit status, or
+128+<I>n</I> if the command is terminated by signal
+<I>n</I>.
+
+<A NAME="lbAM">&nbsp;</A>
+<H4>Pipelines</H4>
+
+A <I>pipeline</I> is a sequence of one or more commands separated by
+one of the control operators
+<B>|</B>
+
+or <B>|&amp;</B>.
+The format for a pipeline is:
+<DL COMPACT><DT><DD>
+<P>
+
+[<B>time</B> [<B>-p</B>]] [ ! ] <I>command</I> [ [<B>|</B>|<B>|&amp;</B>] <I>command2</I> ... ]
+</DL>
+
+<P>
+
+The standard output of
+<I>command</I>
+
+is connected via a pipe to the standard input of
+<I>command2</I>.
+
+This connection is performed before any redirections specified by the
+command (see
+<FONT SIZE=-1><B>REDIRECTION</B>
+
+</FONT>
+below).
+If <B>|&amp;</B> is used, <I>command</I>'s standard error, in addition to its
+standard output, is connected to
+<I>command2</I>'s standard input through the pipe;
+it is shorthand for <B>2&gt;&amp;1 |</B>.
+This implicit redirection of the standard error to the standard output is
+performed after any redirections specified by the command.
+<P>
+
+The return status of a pipeline is the exit status of the last
+command, unless the <B>pipefail</B> option is enabled.
+If <B>pipefail</B> is enabled, the pipeline's return status is the
+value of the last (rightmost) command to exit with a non-zero status,
+or zero if all commands exit successfully.
+If the reserved word
+<B>!</B>
+
+precedes a pipeline, the exit status of that pipeline is the logical
+negation of the exit status as described above.
+The shell waits for all commands in the pipeline to
+terminate before returning a value.
+<P>
+
+If the
+<B>time</B>
+
+reserved word precedes a pipeline, the elapsed as well as user and
+system time consumed by its execution are reported when the pipeline
+terminates.
+The <B>-p</B> option changes the output format to that specified by POSIX.
+When the shell is in <I>posix mode</I>, it does not recognize
+<B>time</B> as a reserved word if the next token begins with a `-'.
+The
+<FONT SIZE=-1><B>TIMEFORMAT</B>
+
+</FONT>
+variable may be set to a format string that specifies how the timing
+information should be displayed; see the description of
+<FONT SIZE=-1><B>TIMEFORMAT</B>
+
+</FONT>
+under
+<B>Shell Variables</B>
+
+below.
+<P>
+
+When the shell is in <I>posix mode</I>, <B>time</B>
+may be followed by a newline.  In this case, the shell displays the
+total user and system time consumed by the shell and its children.
+The
+<FONT SIZE=-1><B>TIMEFORMAT</B>
+
+</FONT>
+variable may be used to specify the format of
+the time information.
+<P>
+
+Each command in a pipeline is executed as a separate process (i.e., in a
+subshell).
+See
+<FONT SIZE=-1><B>COMMAND EXECUTION ENVIRONMENT</B></FONT>
+for a description of a subshell environment.
+If the <B>lastpipe</B> option is enabled using the <B>shopt</B> builtin
+(see the description of <B>shopt</B> below),
+the last element of a pipeline may be run by the shell process.
+<A NAME="lbAN">&nbsp;</A>
+<H4>Lists</H4>
+
+A <I>list</I> is a sequence of one or more pipelines separated by one
+of the operators
+<B>;</B>,
+
+<B>&amp;</B>,
+
+<B>&amp;&amp;</B>,
+
+or
+<B>||</B>,
+
+and optionally terminated by one of
+<B>;</B>,
+
+<B>&amp;</B>,
+
+or
+<B>&lt;newline&gt;</B>.
+
+<P>
+
+Of these list operators,
+<B>&amp;&amp;</B>
+
+and
+<B>||</B>
+
+have equal precedence, followed by
+<B>;</B>
+
+and
+<B>&amp;</B>,
+
+which have equal precedence.
+<P>
+
+A sequence of one or more newlines may appear in a <I>list</I> instead
+of a semicolon to delimit commands.
+<P>
+
+If a command is terminated by the control operator
+<B>&amp;</B>,
+
+the shell executes the command in the <I>background</I>
+in a subshell.
+The shell does not wait for the command to
+finish, and the return status is 0.
+These are referred to as <I>asynchronous</I> commands.
+Commands separated by a
+<B>;</B>
+
+are executed sequentially; the shell waits for each
+command to terminate in turn.  The return status is the
+exit status of the last command executed.
+<P>
+
+AND and OR lists are sequences of one or more pipelines separated by the
+<B>&amp;&amp;</B> and <B>||</B> control operators, respectively.
+AND and OR lists are executed with left associativity.
+An AND list has the form
+<DL COMPACT><DT><DD>
+<P>
+
+<I>command1</I> <B>&amp;&amp;</B> <I>command2</I>
+</DL>
+
+<P>
+
+<I>command2</I>
+
+is executed if, and only if,
+<I>command1</I>
+
+returns an exit status of zero (success).
+<P>
+
+An OR list has the form
+<DL COMPACT><DT><DD>
+<P>
+
+<I>command1</I> <B>||</B> <I>command2</I>
+</DL>
+
+<P>
+
+<I>command2</I>
+
+is executed if, and only if,
+<I>command1</I>
+
+returns a non-zero exit status.
+The return status of
+AND and OR lists is the exit status of the last command
+executed in the list.
+<A NAME="lbAO">&nbsp;</A>
+<H4>Compound Commands</H4>
+
+A <I>compound command</I> is one of the following.
+In most cases a <I>list</I> in a command's description may be separated from
+the rest of the command by one or more newlines, and may be followed by a
+newline in place of a semicolon.
+<DL COMPACT>
+<DT>(<I>list</I>)<DD>
+<I>list</I> is executed in a subshell environment (see
+<FONT SIZE=-1><B>COMMAND EXECUTION ENVIRONMENT</B></FONT>
+below).
+Variable assignments and builtin
+commands that affect the shell's environment do not remain in effect
+after the command completes.  The return status is the exit status of
+<I>list</I>.
+<DT>{ <I>list</I>; }<DD>
+<I>list</I> is simply executed in the current shell environment.
+<I>list</I> must be terminated with a newline or semicolon.
+This is known as a <I>group command</I>.
+The return status is the exit status of
+<I>list</I>.
+Note that unlike the metacharacters <B>(</B> and <B>)</B>, <B>{</B> and
+<B>}</B> are <I>reserved words</I> and must occur where a reserved
+word is permitted to be recognized.  Since they do not cause a word
+break, they must be separated from <I>list</I> by whitespace or another
+shell metacharacter.
+<DT>((<I>expression</I>))<DD>
+The <I>expression</I> is evaluated according to the rules described
+below under
+<FONT SIZE=-1><B>ARITHMETIC EVALUATION</B>.
+
+</FONT>
+If the value of the expression is non-zero, the return status is 0;
+otherwise the return status is 1.  This is exactly equivalent to
+<B>let &quot;</B><I>expression</I>&quot;.
+<DT><B>[[</B> <I>expression</I> <B>]]</B><DD>
+Return a status of 0 or 1 depending on the evaluation of
+the conditional expression <I>expression</I>.
+Expressions are composed of the primaries described below under
+<FONT SIZE=-1><B>CONDITIONAL EXPRESSIONS</B>.
+
+</FONT>
+Word splitting and pathname expansion are not performed on the words
+between the <B>[[</B> and <B>]]</B>; tilde expansion,
+parameter and variable expansion,
+arithmetic expansion, command substitution, process
+substitution, and quote removal are performed.
+Conditional operators such as <B>-f</B> must be unquoted to be recognized
+as primaries.
+<P>
+
+
+When used with <B>[[</B>, the <B>&lt;</B> and <B>&gt;</B> operators sort
+lexicographically using the current locale.
+<P>
+
+
+When the <B>==</B> and <B>!=</B> operators are used, the string to the
+right of the operator is considered a pattern and matched according
+to the rules described below under <B>Pattern Matching</B>,
+as if the <B>extglob</B> shell option were enabled.
+The <B>=</B> operator is equivalent to <B>==</B>.
+If the
+<B>nocasematch</B>
+
+shell option is enabled, the match is performed without regard to the case
+of alphabetic characters.
+The return value is 0 if the string matches (<B>==</B>) or does not match
+(<B>!=</B>) the pattern, and 1 otherwise.
+Any part of the pattern may be quoted to force the quoted portion
+to be matched as a string.
+<P>
+
+
+An additional binary operator, <B>=~</B>, is available, with the same
+precedence as <B>==</B> and <B>!=</B>.
+When it is used, the string to the right of the operator is considered
+a POSIX extended regular expression and matched accordingly
+(using the POSIX <I>regcomp</I> and <I>regexec</I> interfaces
+usually described in <I>regex</I>(3)).
+The return value is 0 if the string matches
+the pattern, and 1 otherwise.
+If the regular expression is syntactically incorrect, the conditional
+expression's return value is 2.
+If the
+<B>nocasematch</B>
+
+shell option is enabled, the match is performed without regard to the case
+of alphabetic characters.
+Any part of the pattern may be quoted to force the quoted portion
+to be matched as a string.
+Bracket expressions in regular expressions must be treated carefully,
+since normal quoting characters lose their meanings between brackets.
+If the pattern is stored in a shell variable, quoting the variable
+expansion forces the entire pattern to be matched as a string.
+<P>
+
+
+The pattern will match if it matches any part of the string.
+Anchor the pattern using the <B>^</B> and <B>$</B> regular expression
+operators to force it to match the entire string.
+The array variable
+<FONT SIZE=-1><B>BASH_REMATCH</B>
+
+</FONT>
+records which parts of the string matched the pattern.
+The element of
+<FONT SIZE=-1><B>BASH_REMATCH</B>
+
+</FONT>
+with index 0 contains the portion of
+the string matching the entire regular expression.
+Substrings matched by parenthesized subexpressions within the regular
+expression are saved in the remaining
+<FONT SIZE=-1><B>BASH_REMATCH</B>
+
+</FONT>
+indices. The element of
+<FONT SIZE=-1><B>BASH_REMATCH</B>
+
+</FONT>
+with index <I>n</I> is the portion of the
+string matching the <I>n</I>th parenthesized subexpression.
+<P>
+
+
+Expressions may be combined using the following operators, listed
+in decreasing order of precedence:
+<P>
+
+
+<DL COMPACT><DT><DD>
+
+<DL COMPACT>
+<DT><B>( </B><I>expression</I> )
+
+<DD>
+Returns the value of <I>expression</I>.
+This may be used to override the normal precedence of operators.
+<DT><B>! </B><I>expression</I>
+
+<DD>
+True if
+<I>expression</I>
+
+is false.
+<DT><I>expression1</I> <B>&amp;&amp;</B> <I>expression2</I><DD>
+True if both
+<I>expression1</I>
+
+and
+<I>expression2</I>
+
+are true.
+<DT><I>expression1</I> <B>||</B> <I>expression2</I><DD>
+True if either
+<I>expression1</I>
+
+or
+<I>expression2</I>
+
+is true.
+
+</DL>
+<P>
+
+The <B>&amp;&amp;</B> and <B>||</B>
+operators do not evaluate <I>expression2</I> if the value of
+<I>expression1</I> is sufficient to determine the return value of
+the entire conditional expression.
+</DL>
+
+<DT><B>for</B> <I>name</I> [ [ <B>in</B> [ <I>word ...</I> ] ] ; ] <B>do</B> <I>list</I> ; <B>done</B><DD>
+The list of words following <B>in</B> is expanded, generating a list
+of items.
+The variable <I>name</I> is set to each element of this list
+in turn, and <I>list</I> is executed each time.
+If the <B>in</B> <I>word</I> is omitted, the <B>for</B> command executes
+<I>list</I> once for each positional parameter that is set (see
+<FONT SIZE=-1><B>PARAMETERS</B>
+
+</FONT>
+below).
+The return status is the exit status of the last command that executes.
+If the expansion of the items following <B>in</B> results in an empty
+list, no commands are executed, and the return status is 0.
+<DT><B>for</B> (( <I>expr1</I> ; <I>expr2</I> ; <I>expr3</I> )) ; <B>do</B> <I>list</I> ; <B>done</B><DD>
+First, the arithmetic expression <I>expr1</I> is evaluated according
+to the rules described below under
+<FONT SIZE=-1><B>ARITHMETIC EVALUATION</B>.
+
+</FONT>
+The arithmetic expression <I>expr2</I> is then evaluated repeatedly
+until it evaluates to zero.
+Each time <I>expr2</I> evaluates to a non-zero value, <I>list</I> is
+executed and the arithmetic expression <I>expr3</I> is evaluated.
+If any expression is omitted, it behaves as if it evaluates to 1.
+The return value is the exit status of the last command in <I>list</I>
+that is executed, or false if any of the expressions is invalid.
+<DT><B>select</B> <I>name</I> [ <B>in</B> <I>word</I> ] ; <B>do</B> <I>list</I> ; <B>done</B><DD>
+The list of words following <B>in</B> is expanded, generating a list
+of items.  The set of expanded words is printed on the standard
+error, each preceded by a number.  If the <B>in</B>
+<I>word</I> is omitted, the positional parameters are printed (see
+<FONT SIZE=-1><B>PARAMETERS</B>
+
+</FONT>
+below).  The
+<FONT SIZE=-1><B>PS3</B>
+
+</FONT>
+prompt is then displayed and a line read from the standard input.
+If the line consists of a number corresponding to one of
+the displayed words, then the value of
+<I>name</I>
+
+is set to that word.  If the line is empty, the words and prompt
+are displayed again.  If EOF is read, the command completes.  Any
+other value read causes
+<I>name</I>
+
+to be set to null.  The line read is saved in the variable
+<FONT SIZE=-1><B>REPLY</B>.
+
+</FONT>
+The
+<I>list</I>
+
+is executed after each selection until a
+<B>break</B>
+
+command is executed.
+The exit status of
+<B>select</B>
+
+is the exit status of the last command executed in
+<I>list</I>,
+
+or zero if no commands were executed.
+<DT><B>case</B> <I>word</I> <B>in</B> [ [(] <I>pattern</I> [ <B>|</B> <I>pattern</I> ] 
+<DD>
+A <B>case</B> command first expands <I>word</I>, and tries to match
+it against each <I>pattern</I> in turn, using the matching rules
+described under
+<B>Pattern Matching</B>
+
+below.
+The <I>word</I> is expanded using tilde
+expansion, parameter and variable expansion, arithmetic expansion,
+command substitution, process substitution and quote removal.
+Each <I>pattern</I> examined is expanded using tilde
+expansion, parameter and variable expansion, arithmetic expansion,
+command substitution, and process substitution.
+If the
+<B>nocasematch</B>
+
+shell option is enabled, the match is performed without regard to the case
+of alphabetic characters.
+When a match is found, the corresponding <I>list</I> is executed.
+If the <B>;;</B> operator is used, no subsequent matches are attempted after
+the first pattern match.
+Using <B>;&amp;</B> in place of <B>;;</B> causes execution to continue with
+the <I>list</I> associated with the next set of patterns.
+Using <B>;;&amp;</B> in place of <B>;;</B> causes the shell to test the next
+pattern list in the statement, if any, and execute any associated <I>list</I>
+on a successful match,
+continuing the case statement execution as if the pattern list had not matched.
+The exit status is zero if no
+pattern matches.  Otherwise, it is the exit status of the
+last command executed in <I>list</I>.
+<DT><B>if</B> <I>list</I>; <B>then</B> <I>list</I>; [ <B>elif</B> <I>list</I>; <B>then</B> <I>list</I>; ] ... [ <B>else</B> <I>list</I>; ] <B>fi</B><DD>
+The
+<B>if</B>
+
+<I>list</I>
+
+is executed.  If its exit status is zero, the
+<B>then</B> <I>list</I> is executed.  Otherwise, each <B>elif</B>
+<I>list</I> is executed in turn, and if its exit status is zero,
+the corresponding <B>then</B> <I>list</I> is executed and the
+command completes.  Otherwise, the <B>else</B> <I>list</I> is
+executed, if present.  The exit status is the exit status of the
+last command executed, or zero if no condition tested true.
+<DT><B>while</B> <I>list-1</I>; <B>do</B> <I>list-2</I>; <B>done</B><DD>
+
+<DT><B>until</B> <I>list-1</I>; <B>do</B> <I>list-2</I>; <B>done</B><DD>
+
+The <B>while</B> command continuously executes the list
+<I>list-2</I> as long as the last command in the list <I>list-1</I> returns
+an exit status of zero.  The <B>until</B> command is identical
+to the <B>while</B> command, except that the test is negated:
+<I>list-2</I>
+
+is executed as long as the last command in
+<I>list-1</I>
+
+returns a non-zero exit status.
+The exit status of the <B>while</B> and <B>until</B> commands
+is the exit status
+of the last command executed in <I>list-2</I>, or zero if
+none was executed.
+</DL>
+<A NAME="lbAP">&nbsp;</A>
+<H4>Coprocesses</H4>
+
+A <I>coprocess</I> is a shell command preceded by the <B>coproc</B> reserved
+word.
+A coprocess is executed asynchronously in a subshell, as if the command
+had been terminated with the <B>&amp;</B> control operator, with a two-way pipe
+established between the executing shell and the coprocess.
+<P>
+
+The format for a coprocess is:
+<DL COMPACT><DT><DD>
+<P>
+
+<B>coproc</B> [<I>NAME</I>] <I>command</I> [<I>redirections</I>]
+</DL>
+
+<P>
+
+This creates a coprocess named <I>NAME</I>.
+If <I>NAME</I> is not supplied, the default name is <B>COPROC</B>.
+<I>NAME</I> must not be supplied if <I>command</I> is a <I>simple
+command</I> (see above); otherwise, it is interpreted as the first word
+of the simple command.
+When the coprocess is executed, the shell creates an array variable (see
+<B>Arrays</B>
+
+below) named <I>NAME</I> in the context of the executing shell.
+The standard output of
+<I>command</I>
+
+is connected via a pipe to a file descriptor in the executing shell,
+and that file descriptor is assigned to <I>NAME</I>[0].
+The standard input of
+<I>command</I>
+
+is connected via a pipe to a file descriptor in the executing shell,
+and that file descriptor is assigned to <I>NAME</I>[1].
+This pipe is established before any redirections specified by the
+command (see
+<FONT SIZE=-1><B>REDIRECTION</B>
+
+</FONT>
+below).
+The file descriptors can be utilized as arguments to shell commands
+and redirections using standard word expansions.
+Other than those created to execute command and process substitutions,
+the file descriptors are not available in subshells.
+The process ID of the shell spawned to execute the coprocess is
+available as the value of the variable <I>NAME</I>_PID.
+The <B>wait</B>
+builtin command may be used to wait for the coprocess to terminate.
+<P>
+
+Since the coprocess is created as an asynchronous command,
+the <B>coproc</B> command always returns success.
+The return status of a coprocess is the exit status of <I>command</I>.
+<A NAME="lbAQ">&nbsp;</A>
+<H4>Shell Function Definitions</H4>
+
+A shell function is an object that is called like a simple command and
+executes a compound command with a new set of positional parameters.
+Shell functions are declared as follows:
+<DL COMPACT>
+<DT><I>fname</I> () <I>compound-command</I> [<I>redirection</I>]<DD>
+
+<DT><B>function</B> <I>fname</I> [()] <I>compound-command</I> [<I>redirection</I>]<DD>
+
+This defines a function named <I>fname</I>.
+The reserved word <B>function</B> is optional.
+If the <B>function</B> reserved word is supplied, the parentheses are optional.
+The <I>body</I> of the function is the compound command
+<I>compound-command</I>
+
+(see <B>Compound Commands</B> above).
+That command is usually a <I>list</I> of commands between { and }, but
+may be any command listed under <B>Compound Commands</B> above,
+with one exception: If the <B>function</B> reserved word is used, but the
+parentheses are not supplied, the braces are required.
+<I>compound-command</I> is executed whenever <I>fname</I> is specified as the
+name of a simple command.
+When in <I>posix mode</I>, <I>fname</I> must be a valid shell <I>name</I>
+and may not be the name of one of the
+POSIX <I>special builtins</I>.
+In default mode, a function name can be any unquoted shell word that does
+not contain <B>$</B>.
+Any redirections (see
+<FONT SIZE=-1><B>REDIRECTION</B>
+
+</FONT>
+below) specified when a function is defined are performed
+when the function is executed.
+The exit status of a function definition is zero unless a syntax error
+occurs or a readonly function with the same name already exists.
+When executed, the exit status of a function is the exit status of the
+last command executed in the body.  (See
+<FONT SIZE=-1><B>FUNCTIONS</B>
+
+</FONT>
+below.)
+</DL>
+<A NAME="lbAR">&nbsp;</A>
+<H3>COMMENTS</H3>
+
+In a non-interactive shell, or an interactive shell in which the
+<B>interactive_comments</B>
+
+option to the
+<B>shopt</B>
+
+builtin is enabled (see
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>
+
+</FONT>
+below), a word beginning with
+<B>#</B>
+
+causes that word and all remaining characters on that line to
+be ignored.  An interactive shell without the
+<B>interactive_comments</B>
+
+option enabled does not allow comments.  The
+<B>interactive_comments</B>
+
+option is on by default in interactive shells.
+<A NAME="lbAS">&nbsp;</A>
+<H3>QUOTING</H3>
+
+<I>Quoting</I> is used to remove the special meaning of certain
+characters or words to the shell.  Quoting can be used to
+disable special treatment for special characters, to prevent
+reserved words from being recognized as such, and to prevent
+parameter expansion.
+<P>
+
+Each of the <I>metacharacters</I> listed above under
+<FONT SIZE=-1><B>DEFINITIONS</B>
+
+</FONT>
+has special meaning to the shell and must be quoted if it is to
+represent itself.
+<P>
+
+When the command history expansion facilities are being used
+(see
+<FONT SIZE=-1><B>HISTORY EXPANSION</B>
+
+</FONT>
+below), the
+<I>history expansion</I> character, usually <B>!</B>, must be quoted
+to prevent history expansion.
+<P>
+
+There are three quoting mechanisms: the
+<I>escape character</I>,
+
+single quotes, and double quotes.
+<P>
+
+A non-quoted backslash (<B>\</B>) is the
+<I>escape character</I>.
+
+It preserves the literal value of the next character that follows,
+with the exception of &lt;newline&gt;.  If a <B>\</B>&lt;newline&gt; pair
+appears, and the backslash is not itself quoted, the <B>\</B>&lt;newline&gt;
+is treated as a line continuation (that is, it is removed from the
+input stream and effectively ignored).
+<P>
+
+Enclosing characters in single quotes preserves the literal value
+of each character within the quotes.  A single quote may not occur
+between single quotes, even when preceded by a backslash.
+<P>
+
+Enclosing characters in double quotes preserves the literal value
+of all characters within the quotes, with the exception of
+<B>$</B>,
+
+<B>`</B>,
+
+<B>\</B>,
+
+and, when history expansion is enabled,
+<B>!</B>.
+
+When the shell is in <I>posix mode</I>, the <B>!</B> has no special meaning
+within double quotes, even when history expansion is enabled.
+The characters
+<B>$</B>
+
+and
+<B>`</B>
+
+retain their special meaning within double quotes.  The backslash
+retains its special meaning only when followed by one of the following
+characters:
+<B>$</B>,
+
+<B>`</B>,
+
+<B>&quot;</B>,
+<B>\</B>,
+
+or
+<B>&lt;newline&gt;</B>.
+
+A double quote may be quoted within double quotes by preceding it with
+a backslash.
+If enabled, history expansion will be performed unless an
+<B>!</B>
+
+appearing in double quotes is escaped using a backslash.
+The backslash preceding the
+<B>!</B>
+
+is not removed.
+<P>
+
+The special parameters
+<B>*</B>
+
+and
+<B>@</B>
+
+have special meaning when in double
+quotes (see
+<FONT SIZE=-1><B>PARAMETERS</B>
+
+</FONT>
+below).
+<P>
+
+Words of the form <B>$</B>aq<I>string</I>aq are treated specially.  The
+word expands to <I>string</I>, with backslash-escaped characters replaced
+as specified by the ANSI C standard.  Backslash escape sequences, if
+present, are decoded as follows:
+<DL COMPACT><DT><DD>
+
+<DL COMPACT>
+<DT><B>\a</B>
+
+<DD>
+alert (bell)
+<DT><B>\b</B>
+
+<DD>
+backspace
+<DT><B>\e</B>
+
+<DD>
+<DT><B>\E</B>
+
+<DD>
+an escape character
+<DT><B>\f</B>
+
+<DD>
+form feed
+<DT><B>\n</B>
+
+<DD>
+new line
+<DT><B>\r</B>
+
+<DD>
+carriage return
+<DT><B>\t</B>
+
+<DD>
+horizontal tab
+<DT><B>\v</B>
+
+<DD>
+vertical tab
+<DT><B>\\</B>
+
+<DD>
+backslash
+<DT><B>\aq</B>
+
+<DD>
+single quote
+<DT><B>\dq</B>
+
+<DD>
+double quote
+<DT><B>\?</B>
+
+<DD>
+question mark
+<DT><B>\</B><I>nnn</I>
+
+<DD>
+the eight-bit character whose value is the octal value <I>nnn</I>
+(one to three octal digits)
+<DT><B>\x</B><I>HH</I>
+
+<DD>
+the eight-bit character whose value is the hexadecimal value <I>HH</I>
+(one or two hex digits)
+<DT><B>\u</B><I>HHHH</I>
+
+<DD>
+the Unicode (ISO/IEC 10646) character whose value is the hexadecimal value
+<I>HHHH</I> (one to four hex digits)
+<DT><B>\U</B><I>HHHHHHHH</I>
+
+<DD>
+the Unicode (ISO/IEC 10646) character whose value is the hexadecimal value
+<I>HHHHHHHH</I> (one to eight hex digits)
+<DT><B>\c</B><I>x</I>
+
+<DD>
+a control-<I>x</I> character
+
+</DL></DL>
+
+<P>
+
+The expanded result is single-quoted, as if the dollar sign had
+not been present.
+<P>
+
+A double-quoted string preceded by a dollar sign (<B>$</B>dq<I>string</I>dq)
+will cause the string to be translated according to the current locale.
+The <I>gettext</I> infrastructure performs the message catalog lookup and
+translation, using the <B>LC_MESSAGES</B> and <B>TEXTDOMAIN</B> shell
+variables.
+If the current locale is <B>C</B> or <B>POSIX</B>,
+or if there are no translations available,
+the dollar sign is ignored.
+If the string is translated and replaced, the replacement is
+double-quoted.
+<A NAME="lbAT">&nbsp;</A>
+<H3>PARAMETERS</H3>
+
+A
+<I>parameter</I>
+
+is an entity that stores values.
+It can be a
+<I>name</I>,
+
+a number, or one of the special characters listed below under
+<B>Special Parameters</B>.
+
+A
+<I>variable</I>
+
+is a parameter denoted by a
+<I>name</I>.
+
+A variable has a <I>value</I> and zero or more <I>attributes</I>.
+Attributes are assigned using the
+<B>declare</B>
+
+builtin command (see
+<B>declare</B>
+
+below in
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>).
+
+</FONT>
+<P>
+
+A parameter is set if it has been assigned a value.  The null string is
+a valid value.  Once a variable is set, it may be unset only by using
+the
+<B>unset</B>
+
+builtin command (see
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>
+
+</FONT>
+below).
+<P>
+
+A
+<I>variable</I>
+
+may be assigned to by a statement of the form
+<DL COMPACT><DT><DD>
+<P>
+
+<I>name</I>=[<I>value</I>]
+</DL>
+
+<P>
+
+If
+<I>value</I>
+
+is not given, the variable is assigned the null string.  All
+<I>values</I>
+
+undergo tilde expansion, parameter and variable expansion,
+command substitution, arithmetic expansion, and quote
+removal (see
+<FONT SIZE=-1><B>EXPANSION</B>
+
+</FONT>
+below).  If the variable has its
+<B>integer</B>
+
+attribute set, then
+<I>value</I>
+
+is evaluated as an arithmetic expression even if the $((...)) expansion is
+not used (see
+<B>Arithmetic Expansion</B>
+
+below).
+Word splitting is not performed, with the exception
+of <B>&quot;$@&quot;</B> as explained below under
+<B>Special Parameters</B>.
+
+Pathname expansion is not performed.
+Assignment statements may also appear as arguments to the
+<B>alias</B>,
+
+<B>declare</B>,
+
+<B>typeset</B>,
+
+<B>export</B>,
+
+<B>readonly</B>,
+
+and
+<B>local</B>
+
+builtin commands (<I>declaration</I> commands).
+When in <I>posix mode</I>, these builtins may appear in a command after
+one or more instances of the <B>command</B> builtin and retain these
+assignment statement properties.
+<P>
+
+In the context where an assignment statement is assigning a value
+to a shell variable or array index, the += operator can be used to
+append to or add to the variable's previous value.
+This includes arguments to builtin commands such as <B>declare</B> that
+accept assignment statements (<I>declaration</I> commands).
+When += is applied to a variable for which the <I>integer</I> attribute has been
+set, <I>value</I> is evaluated as an arithmetic expression and added to the
+variable's current value, which is also evaluated.
+When += is applied to an array variable using compound assignment (see
+<B>Arrays</B>
+
+below), the
+variable's value is not unset (as it is when using =), and new values are
+appended to the array beginning at one greater than the array's maximum index
+(for indexed arrays) or added as additional key-value pairs in an
+associative array.
+When applied to a string-valued variable, <I>value</I> is expanded and
+appended to the variable's value.
+<P>
+
+A variable can be assigned the <I>nameref</I> attribute using the
+<B>-n</B> option to the <B>declare</B> or <B>local</B> builtin commands
+(see the descriptions of <B>declare</B> and <B>local</B> below)
+to create a <I>nameref</I>, or a reference to another variable.
+This allows variables to be manipulated indirectly.
+Whenever the nameref variable is referenced, assigned to, unset, or has
+its attributes modified (other than using or changing the <I>nameref</I>
+attribute itself), the
+operation is actually performed on the variable specified by the nameref
+variable's value.
+A nameref is commonly used within shell functions to refer to a variable
+whose name is passed as an argument to the function.
+For instance, if a variable name is passed to a shell function as its first
+argument, running
+<P>
+<DL COMPACT><DT><DD>
+<TT>declare -n ref=$1</TT>
+
+</DL>
+
+<P>
+inside the function creates a nameref variable <B>ref</B> whose value is
+the variable name passed as the first argument.
+References and assignments to <B>ref</B>, and changes to its attributes,
+are treated as references, assignments, and attribute modifications
+to the variable whose name was passed as <B>$1</B>.
+If the control variable in a <B>for</B> loop has the nameref attribute,
+the list of words can be a list of shell variables, and a name reference
+will be established for each word in the list, in turn, when the loop is
+executed.
+Array variables cannot be given the <B>nameref</B> attribute.
+However, nameref variables can reference array variables and subscripted
+array variables.
+Namerefs can be unset using the <B>-n</B> option to the <B>unset</B> builtin.
+Otherwise, if <B>unset</B> is executed with the name of a nameref variable
+as an argument, the variable referenced by the nameref variable will be unset.
+<A NAME="lbAU">&nbsp;</A>
+<H4>Positional Parameters</H4>
+
+A
+<I>positional parameter</I>
+
+is a parameter denoted by one or more
+digits, other than the single digit 0.  Positional parameters are
+assigned from the shell's arguments when it is invoked,
+and may be reassigned using the
+<B>set</B>
+
+builtin command.  Positional parameters may not be assigned to
+with assignment statements.  The positional parameters are
+temporarily replaced when a shell function is executed (see
+<FONT SIZE=-1><B>FUNCTIONS</B>
+
+</FONT>
+below).
+<P>
+
+When a positional parameter consisting of more than a single
+digit is expanded, it must be enclosed in braces (see
+<FONT SIZE=-1><B>EXPANSION</B>
+
+</FONT>
+below).
+<A NAME="lbAV">&nbsp;</A>
+<H4>Special Parameters</H4>
+
+The shell treats several parameters specially.  These parameters may
+only be referenced; assignment to them is not allowed.
+
+<DL COMPACT>
+<DT><B>*</B>
+
+<DD>
+Expands to the positional parameters, starting from one.
+When the expansion is not within double quotes, each positional parameter
+expands to a separate word.
+In contexts where it is performed, those words
+are subject to further word splitting and pathname expansion.
+When the expansion occurs within double quotes, it expands to a single word
+with the value of each parameter separated by the first character of the
+<FONT SIZE=-1><B>IFS</B>
+
+</FONT>
+special variable.  That is, &quot;<B>$*</B>&quot; is equivalent
+to &quot;<B>$1</B><I>c</I><B>$2</B><I>c</I><B>...</B>&quot;, where
+<I>c</I>
+
+is the first character of the value of the
+<FONT SIZE=-1><B>IFS</B>
+
+</FONT>
+variable.  If
+<FONT SIZE=-1><B>IFS</B>
+
+</FONT>
+is unset, the parameters are separated by spaces.
+If
+<FONT SIZE=-1><B>IFS</B>
+
+</FONT>
+is null, the parameters are joined without intervening separators.
+<DT><B>@</B>
+
+<DD>
+Expands to the positional parameters, starting from one.
+In contexts where word splitting is performed, this expands each
+positional parameter to a separate word; if not within double
+quotes, these words are subject to word splitting.
+In contexts where word splitting is not performed,
+this expands to a single word
+with each positional parameter separated by a space.
+When the
+expansion occurs within double quotes, each parameter expands to a
+separate word.  That is, &quot;<B>$@</B>&quot; is equivalent to
+&quot;<B>$1</B>&quot; &quot;<B>$2</B>&quot; ...
+If the double-quoted expansion occurs within a word, the expansion of
+the first parameter is joined with the beginning part of the original
+word, and the expansion of the last parameter is joined with the last
+part of the original word.
+When there are no positional parameters, &quot;<B>$@</B>&quot; and
+<B>$@</B>
+
+expand to nothing (i.e., they are removed).
+<DT><B>#</B>
+
+<DD>
+Expands to the number of positional parameters in decimal.
+<DT><B>?</B>
+
+<DD>
+Expands to the exit status of the most recently executed foreground
+pipeline.
+<DT><B>-</B>
+
+<DD>
+Expands to the current option flags as specified upon invocation,
+by the
+<B>set</B>
+
+builtin command, or those set by the shell itself
+(such as the
+<B>-i</B>
+
+option).
+<DT><B>$</B>
+
+<DD>
+Expands to the process ID of the shell.  In a () subshell, it
+expands to the process ID of the current shell, not the
+subshell.
+<DT><B>!</B>
+
+<DD>
+Expands to the process ID of the job most recently placed into the
+background, whether executed as an asynchronous command or using
+the <B>bg</B> builtin (see
+<FONT SIZE=-1><B>JOB CONTROL</B>
+
+</FONT>
+below).
+<DT><B>0</B>
+
+<DD>
+Expands to the name of the shell or shell script.  This is set at
+shell initialization.  If
+<B>bash</B>
+
+is invoked with a file of commands,
+<B>$0</B>
+
+is set to the name of that file.  If
+<B>bash</B>
+
+is started with the
+<B>-c</B>
+
+option, then
+<B>$0</B>
+
+is set to the first argument after the string to be
+executed, if one is present.  Otherwise, it is set
+to the filename used to invoke
+<B>bash</B>,
+
+as given by argument zero.
+
+</DL>
+<A NAME="lbAW">&nbsp;</A>
+<H4>Shell Variables</H4>
+
+The following variables are set by the shell:
+<P>
+
+
+<DL COMPACT>
+<DT><B>_</B>
+
+<DD>
+At shell startup, set to the pathname used to invoke the
+shell or shell script being executed as passed in the environment
+or argument list.
+Subsequently, expands to the last argument to the previous simple
+command executed in the foreground, after expansion.
+Also set to the full pathname used to invoke each command executed
+and placed in the environment exported to that command.
+When checking mail, this parameter holds the name of the mail file
+currently being checked.
+<DT><B>BASH</B>
+
+<DD>
+Expands to the full filename used to invoke this instance of
+<B>bash</B>.
+
+<DT><B>BASHOPTS</B>
+
+<DD>
+A colon-separated list of enabled shell options.  Each word in
+the list is a valid argument for the
+<B>-s</B>
+
+option to the
+<B>shopt</B>
+
+builtin command (see
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>
+
+</FONT>
+below).  The options appearing in
+<FONT SIZE=-1><B>BASHOPTS</B>
+
+</FONT>
+are those reported as
+<I>on</I>
+
+by <B>shopt</B>.
+If this variable is in the environment when
+<B>bash</B>
+
+starts up, each shell option in the list will be enabled before
+reading any startup files.
+This variable is read-only.
+<DT><B>BASHPID</B>
+
+<DD>
+Expands to the process ID of the current <B>bash</B> process.
+This differs from <B>$$</B> under certain circumstances, such as subshells
+that do not require <B>bash</B> to be re-initialized.
+Assignments to
+<FONT SIZE=-1><B>BASHPID</B>
+
+</FONT>
+have no effect.
+If
+<B>BASHPID</B>
+
+is unset, it loses its special properties, even if it is
+subsequently reset.
+<DT><B>BASH_ALIASES</B>
+
+<DD>
+An associative array variable whose members correspond to the internal
+list of aliases as maintained by the <B>alias</B> builtin.
+Elements added to this array appear in the alias list; however,
+unsetting array elements currently does not cause aliases to be removed
+from the alias list.
+If
+<B>BASH_ALIASES</B>
+
+is unset, it loses its special properties, even if it is
+subsequently reset.
+<DT><B>BASH_ARGC</B>
+
+<DD>
+An array variable whose values are the number of parameters in each
+frame of the current <B>bash</B> execution call stack.
+The number of
+parameters to the current subroutine (shell function or script executed
+with <B>.</B> or <B>source</B>) is at the top of the stack.
+When a subroutine is executed, the number of parameters passed is pushed onto
+<FONT SIZE=-1><B>BASH_ARGC</B>.
+
+</FONT>
+The shell sets
+<FONT SIZE=-1><B>BASH_ARGC</B>
+
+</FONT>
+only when in extended debugging mode (see the description of the
+<B>extdebug</B>
+
+option to the
+<B>shopt</B>
+
+builtin below).
+Setting <B>extdebug</B> after the shell has started to execute a script,
+or referencing this variable when <B>extdebug</B> is not set,
+may result in inconsistent values.
+<DT><B>BASH_ARGV</B>
+
+<DD>
+An array variable containing all of the parameters in the current <B>bash</B>
+execution call stack.  The final parameter of the last subroutine call
+is at the top of the stack; the first parameter of the initial call is
+at the bottom.  When a subroutine is executed, the parameters supplied
+are pushed onto
+<FONT SIZE=-1><B>BASH_ARGV</B>.
+
+</FONT>
+The shell sets
+<FONT SIZE=-1><B>BASH_ARGV</B>
+
+</FONT>
+only when in extended debugging mode
+(see the description of the
+<B>extdebug</B>
+
+option to the
+<B>shopt</B>
+
+builtin below).
+Setting <B>extdebug</B> after the shell has started to execute a script,
+or referencing this variable when <B>extdebug</B> is not set,
+may result in inconsistent values.
+<DT><B>BASH_ARGV0</B>
+
+<DD>
+When referenced, this variable expands to the name of the shell or shell
+script (identical to
+<B>$0</B>;
+
+see the description of special parameter 0 above).
+Assignment to
+<B>BASH_ARGV0</B>
+
+causes the value assigned to also be assigned to <B>$0</B>.
+If
+<B>BASH_ARGV0</B>
+
+is unset, it loses its special properties, even if it is
+subsequently reset.
+<DT><B>BASH_CMDS</B>
+
+<DD>
+An associative array variable whose members correspond to the internal
+hash table of commands as maintained by the <B>hash</B> builtin.
+Elements added to this array appear in the hash table; however,
+unsetting array elements currently does not cause command names to be removed
+from the hash table.
+If
+<B>BASH_CMDS</B>
+
+is unset, it loses its special properties, even if it is
+subsequently reset.
+<DT><B>BASH_COMMAND</B>
+
+<DD>
+The command currently being executed or about to be executed, unless the
+shell is executing a command as the result of a trap,
+in which case it is the command executing at the time of the trap.
+If
+<B>BASH_COMMAND</B>
+
+is unset, it loses its special properties, even if it is
+subsequently reset.
+<DT><B>BASH_EXECUTION_STRING</B>
+
+<DD>
+The command argument to the <B>-c</B> invocation option.
+<DT><B>BASH_LINENO</B>
+
+<DD>
+An array variable whose members are the line numbers in source files
+where each corresponding member of
+<FONT SIZE=-1><B>FUNCNAME</B>
+
+</FONT>
+was invoked.
+<B>${BASH_LINENO[</B><I>$i</I><B>]}</B> is the line number in the source
+file (<B>${BASH_SOURCE[</B><I>$i+1</I><B>]}</B>) where
+<B>${FUNCNAME[</B><I>$i</I><B>]}</B> was called
+(or <B>${BASH_LINENO[</B><I>$i-1</I><B>]}</B> if referenced within another
+shell function).
+Use
+<FONT SIZE=-1><B>LINENO</B>
+
+</FONT>
+to obtain the current line number.
+<DT><B>BASH_LOADABLES_PATH</B>
+
+<DD>
+A colon-separated list of directories in which the shell looks for
+dynamically loadable builtins specified by the
+<B>enable</B>
+
+command.
+<DT><B>BASH_REMATCH</B>
+
+<DD>
+An array variable whose members are assigned by the <B>=~</B> binary
+operator to the <B>[[</B> conditional command.
+The element with index 0 is the portion of the string
+matching the entire regular expression.
+The element with index <I>n</I> is the portion of the
+string matching the <I>n</I>th parenthesized subexpression.
+<DT><B>BASH_SOURCE</B>
+
+<DD>
+An array variable whose members are the source filenames
+where the corresponding shell function names in the
+<FONT SIZE=-1><B>FUNCNAME</B>
+
+</FONT>
+array variable are defined.
+The shell function
+<B>${FUNCNAME[</B><I>$i</I><B>]}</B> is defined in the file
+<B>${BASH_SOURCE[</B><I>$i</I><B>]}</B> and called from
+<B>${BASH_SOURCE[</B><I>$i+1</I><B>]}</B>.
+<DT><B>BASH_SUBSHELL</B>
+
+<DD>
+Incremented by one within each subshell or subshell environment when
+the shell begins executing in that environment.
+The initial value is 0.
+If
+<B>BASH_SUBSHELL</B>
+
+is unset, it loses its special properties, even if it is
+subsequently reset.
+<DT><B>BASH_VERSINFO</B>
+
+<DD>
+A readonly array variable whose members hold version information for
+this instance of
+<B>bash</B>.
+
+The values assigned to the array members are as follows:
+<P>
+<DL COMPACT><DT><DD>
+<DL COMPACT>
+<DT><B>BASH_VERSINFO[</B>0]
+
+<DD>
+The major version number (the <I>release</I>).
+<DT><B>BASH_VERSINFO[</B>1]
+
+<DD>
+The minor version number (the <I>version</I>).
+<DT><B>BASH_VERSINFO[</B>2]
+
+<DD>
+The patch level.
+<DT><B>BASH_VERSINFO[</B>3]
+
+<DD>
+The build version.
+<DT><B>BASH_VERSINFO[</B>4]
+
+<DD>
+The release status (e.g., <I>beta1</I>).
+<DT><B>BASH_VERSINFO[</B>5]
+
+<DD>
+The value of
+<FONT SIZE=-1><B>MACHTYPE</B>.
+
+</FONT>
+</DL></DL>
+
+<DT><B>BASH_VERSION</B>
+
+<DD>
+Expands to a string describing the version of this instance of
+<B>bash</B>.
+
+<DT><B>COMP_CWORD</B>
+
+<DD>
+An index into <B>${COMP_WORDS}</B> of the word containing the current
+cursor position.
+This variable is available only in shell functions invoked by the
+programmable completion facilities (see <B>Programmable Completion</B>
+below).
+<DT><B>COMP_KEY</B>
+
+<DD>
+The key (or final key of a key sequence) used to invoke the current
+completion function.
+<DT><B>COMP_LINE</B>
+
+<DD>
+The current command line.
+This variable is available only in shell functions and external
+commands invoked by the
+programmable completion facilities (see <B>Programmable Completion</B>
+below).
+<DT><B>COMP_POINT</B>
+
+<DD>
+The index of the current cursor position relative to the beginning of
+the current command.
+If the current cursor position is at the end of the current command,
+the value of this variable is equal to <B>${#COMP_LINE}</B>.
+This variable is available only in shell functions and external
+commands invoked by the
+programmable completion facilities (see <B>Programmable Completion</B>
+below).
+<DT><B>COMP_TYPE</B>
+
+<DD>
+Set to an integer value corresponding to the type of completion attempted
+that caused a completion function to be called:
+<I>TAB</I>, for normal completion,
+<I>?</I>, for listing completions after successive tabs,
+<I>!</I>, for listing alternatives on partial word completion,
+<I>@</I>, to list completions if the word is not unmodified,
+or
+<I>%</I>, for menu completion.
+This variable is available only in shell functions and external
+commands invoked by the
+programmable completion facilities (see <B>Programmable Completion</B>
+below).
+<DT><B>COMP_WORDBREAKS</B>
+
+<DD>
+The set of characters that the <B>readline</B> library treats as word
+separators when performing word completion.
+If
+<FONT SIZE=-1><B>COMP_WORDBREAKS</B>
+
+</FONT>
+is unset, it loses its special properties, even if it is
+subsequently reset.
+<DT><B>COMP_WORDS</B>
+
+<DD>
+An array variable (see <B>Arrays</B> below) consisting of the individual
+words in the current command line.
+The line is split into words as <B>readline</B> would split it, using
+<FONT SIZE=-1><B>COMP_WORDBREAKS</B>
+
+</FONT>
+as described above.
+This variable is available only in shell functions invoked by the
+programmable completion facilities (see <B>Programmable Completion</B>
+below).
+<DT><B>COPROC</B>
+
+<DD>
+An array variable (see <B>Arrays</B> below) created to hold the file descriptors
+for output from and input to an unnamed coprocess (see <B>Coprocesses</B>
+above).
+<DT><B>DIRSTACK</B>
+
+<DD>
+An array variable (see
+<B>Arrays</B>
+
+below) containing the current contents of the directory stack.
+Directories appear in the stack in the order they are displayed by the
+<B>dirs</B>
+
+builtin.
+Assigning to members of this array variable may be used to modify
+directories already in the stack, but the
+<B>pushd</B>
+
+and
+<B>popd</B>
+
+builtins must be used to add and remove directories.
+Assignment to this variable will not change the current directory.
+If
+<FONT SIZE=-1><B>DIRSTACK</B>
+
+</FONT>
+is unset, it loses its special properties, even if it is
+subsequently reset.
+<DT><B>EPOCHREALTIME</B>
+
+<DD>
+Each time this parameter is referenced, it expands to the number of seconds
+since the Unix Epoch (see <I>time</I>(3)) as a floating point value
+with micro-second granularity.
+Assignments to
+<FONT SIZE=-1><B>EPOCHREALTIME</B>
+
+</FONT>
+are ignored.
+If
+<FONT SIZE=-1><B>EPOCHREALTIME</B>
+
+</FONT>
+is unset, it loses its special properties, even if it is
+subsequently reset.
+<DT><B>EPOCHSECONDS</B>
+
+<DD>
+Each time this parameter is referenced, it expands to the number of seconds
+since the Unix Epoch (see <I>time</I>(3)).
+Assignments to
+<FONT SIZE=-1><B>EPOCHSECONDS</B>
+
+</FONT>
+are ignored.
+If
+<FONT SIZE=-1><B>EPOCHSECONDS</B>
+
+</FONT>
+is unset, it loses its special properties, even if it is
+subsequently reset.
+<DT><B>EUID</B>
+
+<DD>
+Expands to the effective user ID of the current user, initialized at
+shell startup.  This variable is readonly.
+<DT><B>FUNCNAME</B>
+
+<DD>
+An array variable containing the names of all shell functions
+currently in the execution call stack.
+The element with index 0 is the name of any currently-executing
+shell function.
+The bottom-most element (the one with the highest index) is
+<TT>&quot;main&quot;</TT>.
+
+This variable exists only when a shell function is executing.
+Assignments to
+<FONT SIZE=-1><B>FUNCNAME</B>
+
+</FONT>
+have no effect.
+If
+<FONT SIZE=-1><B>FUNCNAME</B>
+
+</FONT>
+is unset, it loses its special properties, even if it is
+subsequently reset.
+<P>
+
+
+This variable can be used with <B>BASH_LINENO</B> and <B>BASH_SOURCE</B>.
+Each element of <B>FUNCNAME</B> has corresponding elements in
+<B>BASH_LINENO</B> and <B>BASH_SOURCE</B> to describe the call stack.
+For instance, <B>${FUNCNAME[</B><I>$i</I><B>]}</B> was called from the file
+<B>${BASH_SOURCE[</B><I>$i+1</I><B>]}</B> at line number
+<B>${BASH_LINENO[</B><I>$i</I><B>]}</B>.
+The <B>caller</B> builtin displays the current call stack using this
+information.
+<DT><B>GROUPS</B>
+
+<DD>
+An array variable containing the list of groups of which the current
+user is a member.
+Assignments to
+<FONT SIZE=-1><B>GROUPS</B>
+
+</FONT>
+have no effect.
+If
+<FONT SIZE=-1><B>GROUPS</B>
+
+</FONT>
+is unset, it loses its special properties, even if it is
+subsequently reset.
+<DT><B>HISTCMD</B>
+
+<DD>
+The history number, or index in the history list, of the current
+command.
+Assignments to
+<FONT SIZE=-1><B>HISTCMD</B>
+
+</FONT>
+are ignored.
+If
+<FONT SIZE=-1><B>HISTCMD</B>
+
+</FONT>
+is unset, it loses its special properties, even if it is
+subsequently reset.
+<DT><B>HOSTNAME</B>
+
+<DD>
+Automatically set to the name of the current host.
+<DT><B>HOSTTYPE</B>
+
+<DD>
+Automatically set to a string that uniquely
+describes the type of machine on which
+<B>bash</B>
+
+is executing.
+The default is system-dependent.
+<DT><B>LINENO</B>
+
+<DD>
+Each time this parameter is referenced, the shell substitutes
+a decimal number representing the current sequential line number
+(starting with 1) within a script or function.  When not in a
+script or function, the value substituted is not guaranteed to
+be meaningful.
+If
+<FONT SIZE=-1><B>LINENO</B>
+
+</FONT>
+is unset, it loses its special properties, even if it is
+subsequently reset.
+<DT><B>MACHTYPE</B>
+
+<DD>
+Automatically set to a string that fully describes the system
+type on which
+<B>bash</B>
+
+is executing, in the standard GNU <I>cpu-company-system</I> format.
+The default is system-dependent.
+<DT><B>MAPFILE</B>
+
+<DD>
+An array variable (see <B>Arrays</B> below) created to hold the text
+read by the <B>mapfile</B> builtin when no variable name is supplied.
+<DT><B>OLDPWD</B>
+
+<DD>
+The previous working directory as set by the
+<B>cd</B>
+
+command.
+<DT><B>OPTARG</B>
+
+<DD>
+The value of the last option argument processed by the
+<B>getopts</B>
+
+builtin command (see
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>
+
+</FONT>
+below).
+<DT><B>OPTIND</B>
+
+<DD>
+The index of the next argument to be processed by the
+<B>getopts</B>
+
+builtin command (see
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>
+
+</FONT>
+below).
+<DT><B>OSTYPE</B>
+
+<DD>
+Automatically set to a string that
+describes the operating system on which
+<B>bash</B>
+
+is executing.
+The default is system-dependent.
+<DT><B>PIPESTATUS</B>
+
+<DD>
+An array variable (see
+<B>Arrays</B>
+
+below) containing a list of exit status values from the processes
+in the most-recently-executed foreground pipeline (which may
+contain only a single command).
+<DT><B>PPID</B>
+
+<DD>
+The process ID of the shell's parent.  This variable is readonly.
+<DT><B>PWD</B>
+
+<DD>
+The current working directory as set by the
+<B>cd</B>
+
+command.
+<DT><B>RANDOM</B>
+
+<DD>
+Each time this parameter is referenced, it expands to a random integer
+between 0 and 32767.
+Assigning
+a value to
+<FONT SIZE=-1><B>RANDOM</B>
+
+</FONT>
+initializes (seeds) the sequence of random numbers.
+If
+<FONT SIZE=-1><B>RANDOM</B>
+
+</FONT>
+is unset, it loses its special properties, even if it is
+subsequently reset.
+<DT><B>READLINE_LINE</B>
+
+<DD>
+The contents of the
+<B>readline</B>
+
+line buffer, for use with
+<TT>bind -x</TT>
+
+(see
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>
+
+</FONT>
+below).
+<DT><B>READLINE_MARK</B>
+
+<DD>
+The position of the mark (saved insertion point) in the
+<B>readline</B>
+
+line buffer, for use with
+<TT>bind -x</TT>
+
+(see
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>
+
+</FONT>
+below).
+The characters between the insertion point and the mark are often
+called the <I>region</I>.
+<DT><B>READLINE_POINT</B>
+
+<DD>
+The position of the insertion point in the
+<B>readline</B>
+
+line buffer, for use with
+<TT>bind -x</TT>
+
+(see
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>
+
+</FONT>
+below).
+<DT><B>REPLY</B>
+
+<DD>
+Set to the line of input read by the
+<B>read</B>
+
+builtin command when no arguments are supplied.
+<DT><B>SECONDS</B>
+
+<DD>
+Each time this parameter is
+referenced, the number of seconds since shell invocation is returned.  If a
+value is assigned to
+<FONT SIZE=-1><B>SECONDS</B>,
+
+</FONT>
+the value returned upon subsequent
+references is
+the number of seconds since the assignment plus the value assigned.
+The number of seconds at shell invocation and the current time is always
+determined by querying the system clock.
+If
+<FONT SIZE=-1><B>SECONDS</B>
+
+</FONT>
+is unset, it loses its special properties, even if it is
+subsequently reset.
+<DT><B>SHELLOPTS</B>
+
+<DD>
+A colon-separated list of enabled shell options.  Each word in
+the list is a valid argument for the
+<B>-o</B>
+
+option to the
+<B>set</B>
+
+builtin command (see
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>
+
+</FONT>
+below).  The options appearing in
+<FONT SIZE=-1><B>SHELLOPTS</B>
+
+</FONT>
+are those reported as
+<I>on</I>
+
+by <B>set -o</B>.
+If this variable is in the environment when
+<B>bash</B>
+
+starts up, each shell option in the list will be enabled before
+reading any startup files.
+This variable is read-only.
+<DT><B>SHLVL</B>
+
+<DD>
+Incremented by one each time an instance of
+<B>bash</B>
+
+is started.
+<DT><B>SRANDOM</B>
+
+<DD>
+This variable expands to a 32-bit pseudo-random number each time it is
+referenced. The random number generator is not linear on systems that
+support <TT>/dev/urandom</TT> or <I>arc4random</I>, so each returned number
+has no relationship to the numbers preceding it.
+The random number generator cannot be seeded, so assignments to this
+variable have no effect.
+If
+<FONT SIZE=-1><B>SRANDOM</B>
+
+</FONT>
+is unset, it loses its special properties,
+even if it is subsequently reset.
+<DT><B>UID</B>
+
+<DD>
+Expands to the user ID of the current user, initialized at shell startup.
+This variable is readonly.
+
+</DL>
+<P>
+
+The following variables are used by the shell.  In some cases,
+<B>bash</B>
+
+assigns a default value to a variable; these cases are noted
+below.
+<P>
+
+
+<DL COMPACT>
+<DT><B>BASH_COMPAT</B>
+
+<DD>
+The value is used to set the shell's compatibility level.
+See
+<FONT SIZE=-1><B>SHELL COMPATIBILITY MODE</B>
+
+</FONT>
+below for a description of the various compatibility
+levels and their effects.
+The value may be a decimal number (e.g., 4.2) or an integer (e.g., 42)
+corresponding to the desired compatibility level.
+If <B>BASH_COMPAT</B> is unset or set to the empty string, the compatibility
+level is set to the default for the current version.
+If <B>BASH_COMPAT</B> is set to a value that is not one of the valid
+compatibility levels, the shell prints an error message and sets the
+compatibility level to the default for the current version.
+The valid values correspond to the compatibility levels
+described below under
+<FONT SIZE=-1><B>BSHELL</B>COMPATIBILITY<B>MODE</B>.
+
+</FONT>
+For example, 4.2 and 42 are valid values that correspond
+to the <B>compat42</B> <B>shopt</B> option
+and set the compatibility level to 42.
+The current version is also a valid value.
+<DT><B>BASH_ENV</B>
+
+<DD>
+If this parameter is set when <B>bash</B> is executing a shell script,
+its value is interpreted as a filename containing commands to
+initialize the shell, as in
+<A HREF="file:~/.bashrc"><I>~/.bashrc</I></A>.
+
+The value of
+<FONT SIZE=-1><B>BASH_ENV</B>
+
+</FONT>
+is subjected to parameter expansion, command substitution, and arithmetic
+expansion before being interpreted as a filename.
+<FONT SIZE=-1><B>PATH</B>
+
+</FONT>
+is not used to search for the resultant filename.
+<DT><B>BASH_XTRACEFD</B>
+
+<DD>
+If set to an integer corresponding to a valid file descriptor, <B>bash</B>
+will write the trace output generated when
+<TT>set -x</TT>
+
+is enabled to that file descriptor.
+The file descriptor is closed when
+<FONT SIZE=-1><B>BASH_XTRACEFD</B>
+
+</FONT>
+is unset or assigned a new value.
+Unsetting
+<FONT SIZE=-1><B>BASH_XTRACEFD</B>
+
+</FONT>
+or assigning it the empty string causes the
+trace output to be sent to the standard error.
+Note that setting
+<FONT SIZE=-1><B>BASH_XTRACEFD</B>
+
+</FONT>
+to 2 (the standard error file
+descriptor) and then unsetting it will result in the standard error
+being closed.
+<DT><B>CDPATH</B>
+
+<DD>
+The search path for the
+<B>cd</B>
+
+command.
+This is a colon-separated list of directories in which the shell looks
+for destination directories specified by the
+<B>cd</B>
+
+command.
+A sample value is
+<TT>&quot;.:~:/usr&quot;</TT>.
+
+<DT><B>CHILD_MAX</B>
+
+<DD>
+Set the number of exited child status values for the shell to remember.
+Bash will not allow this value to be decreased below a POSIX-mandated
+minimum, and there is a maximum value (currently 8192) that this may
+not exceed.
+The minimum value is system-dependent.
+<DT><B>COLUMNS</B>
+
+<DD>
+Used by the <B>select</B> compound command to determine the terminal width
+when printing selection lists.
+Automatically set if the
+<B>checkwinsize</B>
+
+option is enabled or in an interactive shell upon receipt of a
+<FONT SIZE=-1><B>SIGWINCH</B>.
+
+</FONT>
+<DT><B>COMPREPLY</B>
+
+<DD>
+An array variable from which <B>bash</B> reads the possible completions
+generated by a shell function invoked by the programmable completion
+facility (see <B>Programmable Completion</B> below).
+Each array element contains one possible completion.
+<DT><B>EMACS</B>
+
+<DD>
+If <B>bash</B> finds this variable in the environment when the shell starts
+with value
+<TT>t</TT>,
+
+it assumes that the shell is running in an Emacs shell buffer and disables
+line editing.
+<DT><B>ENV</B>
+
+<DD>
+Expanded and executed similarly to
+<FONT SIZE=-1><B>BASH_ENV</B>
+
+</FONT>
+(see <B>INVOCATION</B> above)
+when an interactive shell is invoked in <I>posix mode</I>.
+<DT><B>EXECIGNORE</B>
+
+<DD>
+A colon-separated list of shell patterns (see <B>Pattern Matching</B>)
+defining the list of filenames to be ignored by command search using
+<B>PATH</B>.
+Files whose full pathnames match one of these patterns are not considered
+executable files for the purposes of completion and command execution
+via <B>PATH</B> lookup.
+This does not affect the behavior of the <B>[</B>, <B>test</B>, and <B>[[</B>
+commands.
+Full pathnames in the command hash table are not subject to <B>EXECIGNORE</B>.
+Use this variable to ignore shared library files that have the executable
+bit set, but are not executable files.
+The pattern matching honors the setting of the <B>extglob</B> shell
+option.
+<DT><B>FCEDIT</B>
+
+<DD>
+The default editor for the
+<B>fc</B>
+
+builtin command.
+<DT><B>FIGNORE</B>
+
+<DD>
+A colon-separated list of suffixes to ignore when performing
+filename completion (see
+<FONT SIZE=-1><B>READLINE</B>
+
+</FONT>
+below).
+A filename whose suffix matches one of the entries in
+<FONT SIZE=-1><B>FIGNORE</B>
+
+</FONT>
+is excluded from the list of matched filenames.
+A sample value is
+<TT>&quot;.o:~&quot;</TT>.
+
+<DT><B>FUNCNEST</B>
+
+<DD>
+If set to a numeric value greater than 0, defines a maximum function
+nesting level.  Function invocations that exceed this nesting level
+will cause the current command to abort.
+<DT><B>GLOBIGNORE</B>
+
+<DD>
+A colon-separated list of patterns defining the set of file names to
+be ignored by pathname expansion.
+If a file name matched by a pathname expansion pattern also matches one
+of the patterns in
+<FONT SIZE=-1><B>GLOBIGNORE</B>,
+
+</FONT>
+it is removed from the list of matches.
+<DT><B>HISTCONTROL</B>
+
+<DD>
+A colon-separated list of values controlling how commands are saved on
+the history list.
+If the list of values includes
+<I>ignorespace</I>,
+
+lines which begin with a
+<B>space</B>
+
+character are not saved in the history list.
+A value of
+<I>ignoredups</I>
+
+causes lines matching the previous history entry to not be saved.
+A value of
+<I>ignoreboth</I>
+
+is shorthand for <I>ignorespace</I> and <I>ignoredups</I>.
+A value of
+<I>erasedups</I>
+
+causes all previous lines matching the current line to be removed from
+the history list before that line is saved.
+Any value not in the above list is ignored.
+If
+<FONT SIZE=-1><B>HISTCONTROL</B>
+
+</FONT>
+is unset, or does not include a valid value,
+all lines read by the shell parser are saved on the history list,
+subject to the value of
+<FONT SIZE=-1><B>HISTIGNORE</B>.
+
+</FONT>
+The second and subsequent lines of a multi-line compound command are
+not tested, and are added to the history regardless of the value of
+<FONT SIZE=-1><B>HISTCONTROL</B>.
+
+</FONT>
+<DT><B>HISTFILE</B>
+
+<DD>
+The name of the file in which command history is saved (see
+<FONT SIZE=-1><B>HISTORY</B>
+
+</FONT>
+below).  The default value is <A HREF="file:~/.bash_history"><I>~/.bash_history</I></A>.  If unset, the
+command history is not saved when a shell exits.
+<DT><B>HISTFILESIZE</B>
+
+<DD>
+The maximum number of lines contained in the history file.  When this
+variable is assigned a value, the history file is truncated, if
+necessary,
+to contain no more than that number of lines by removing the oldest entries.
+The history file is also truncated to this size after
+writing it when a shell exits.
+If the value is 0, the history file is truncated to zero size.
+Non-numeric values and numeric values less than zero inhibit truncation.
+The shell sets the default value to the value of <B>HISTSIZE</B>
+after reading any startup files.
+<DT><B>HISTIGNORE</B>
+
+<DD>
+A colon-separated list of patterns used to decide which command lines
+should be saved on the history list.  Each pattern is anchored at the
+beginning of the line and must match the complete line (no implicit
+`<B>*</B>' is appended).  Each pattern is tested against the line
+after the checks specified by
+<FONT SIZE=-1><B>HISTCONTROL</B>
+
+</FONT>
+are applied.
+In addition to the normal shell pattern matching characters, `<B>&amp;</B>'
+matches the previous history line.  `<B>&amp;</B>' may be escaped using a
+backslash; the backslash is removed before attempting a match.
+The second and subsequent lines of a multi-line compound command are
+not tested, and are added to the history regardless of the value of
+<FONT SIZE=-1><B>HISTIGNORE</B>.
+
+</FONT>
+The pattern matching honors the setting of the <B>extglob</B> shell
+option.
+<DT><B>HISTSIZE</B>
+
+<DD>
+The number of commands to remember in the command history (see
+<FONT SIZE=-1><B>HISTORY</B>
+
+</FONT>
+below).
+If the value is 0, commands are not saved in the history list.
+Numeric values less than zero result in every command being saved
+on the history list (there is no limit).
+The shell sets the default value to 500 after reading any startup files.
+<DT><B>HISTTIMEFORMAT</B>
+
+<DD>
+If this variable is set and not null, its value is used as a format string
+for <I>strftime</I>(3) to print the time stamp associated with each history
+entry displayed by the <B>history</B> builtin.
+If this variable is set, time stamps are written to the history file so
+they may be preserved across shell sessions.
+This uses the history comment character to distinguish timestamps from
+other history lines.
+<DT><B>HOME</B>
+
+<DD>
+The home directory of the current user; the default argument for the
+<B>cd</B> builtin command.
+The value of this variable is also used when performing tilde expansion.
+<DT><B>HOSTFILE</B>
+
+<DD>
+Contains the name of a file in the same format as
+
+<I>/etc/hosts</I>
+
+that should be read when the shell needs to complete a
+hostname.
+The list of possible hostname completions may be changed while the
+shell is running;
+the next time hostname completion is attempted after the
+value is changed,
+<B>bash</B>
+
+adds the contents of the new file to the existing list.
+If
+<FONT SIZE=-1><B>HOSTFILE</B>
+
+</FONT>
+is set, but has no value, or does not name a readable file,
+<B>bash</B> attempts to read
+
+<I>/etc/hosts</I>
+
+to obtain the list of possible hostname completions.
+When
+<FONT SIZE=-1><B>HOSTFILE</B>
+
+</FONT>
+is unset, the hostname list is cleared.
+<DT><B>IFS</B>
+
+<DD>
+The
+<I>Internal Field Separator</I>
+
+that is used
+for word splitting after expansion and to
+split lines into words with the
+<B>read</B>
+
+builtin command.  The default value is
+``&lt;space&gt;&lt;tab&gt;&lt;newline&gt;''.
+<DT><B>IGNOREEOF</B>
+
+<DD>
+Controls the
+action of an interactive shell on receipt of an
+<FONT SIZE=-1><B>EOF</B>
+
+</FONT>
+character as the sole input.  If set, the value is the number of
+consecutive
+<FONT SIZE=-1><B>EOF</B>
+
+</FONT>
+characters which must be
+typed as the first characters on an input line before
+<B>bash</B>
+
+exits.  If the variable exists but does not have a numeric value, or
+has no value, the default value is 10.  If it does not exist,
+<FONT SIZE=-1><B>EOF</B>
+
+</FONT>
+signifies the end of input to the shell.
+<DT><B>INPUTRC</B>
+
+<DD>
+The filename for the
+<B>readline</B>
+
+startup file, overriding the default of
+
+<A HREF="file:~/.inputrc"><I>~/.inputrc</I></A>
+
+(see
+<FONT SIZE=-1><B>READLINE</B>
+
+</FONT>
+below).
+<DT><B>INSIDE_EMACS</B>
+
+<DD>
+If this variable appears in the environment when the shell starts,
+<B>bash</B> assumes that it is running inside an Emacs shell buffer
+and may disable line editing, depending on the value of <B>TERM</B>.
+<DT><B>LANG</B>
+
+<DD>
+Used to determine the locale category for any category not specifically
+selected with a variable starting with <B>LC_</B>.
+<DT><B>LC_ALL</B>
+
+<DD>
+This variable overrides the value of
+<FONT SIZE=-1><B>LANG</B>
+
+</FONT>
+and any other
+<B>LC_</B> variable specifying a locale category.
+<DT><B>LC_COLLATE</B>
+
+<DD>
+This variable determines the collation order used when sorting the
+results of pathname expansion, and determines the behavior of range
+expressions, equivalence classes, and collating sequences within
+pathname expansion and pattern matching.
+<DT><B>LC_CTYPE</B>
+
+<DD>
+This variable determines the interpretation of characters and the
+behavior of character classes within pathname expansion and pattern
+matching.
+<DT><B>LC_MESSAGES</B>
+
+<DD>
+This variable determines the locale used to translate double-quoted
+strings preceded by a <B>$</B>.
+<DT><B>LC_NUMERIC</B>
+
+<DD>
+This variable determines the locale category used for number formatting.
+<DT><B>LC_TIME</B>
+
+<DD>
+This variable determines the locale category used for data and time
+formatting.
+<DT><B>LINES</B>
+
+<DD>
+Used by the <B>select</B> compound command to determine the column length
+for printing selection lists.
+Automatically set if the
+<B>checkwinsize</B>
+
+option is enabled or in an interactive shell upon receipt of a
+<FONT SIZE=-1><B>SIGWINCH</B>.
+
+</FONT>
+<DT><B>MAIL</B>
+
+<DD>
+If this parameter is set to a file or directory name and the
+<FONT SIZE=-1><B>MAILPATH</B>
+
+</FONT>
+variable is not set,
+<B>bash</B>
+
+informs the user of the arrival of mail in the specified file or
+Maildir-format directory.
+<DT><B>MAILCHECK</B>
+
+<DD>
+Specifies how
+often (in seconds)
+<B>bash</B>
+
+checks for mail.  The default is 60 seconds.  When it is time to check
+for mail, the shell does so before displaying the primary prompt.
+If this variable is unset, or set to a value that is not a number
+greater than or equal to zero, the shell disables mail checking.
+<DT><B>MAILPATH</B>
+
+<DD>
+A colon-separated list of filenames to be checked for mail.
+The message to be printed when mail arrives in a particular file
+may be specified by separating the filename from the message with a `?'.
+When used in the text of the message, <B>$_</B> expands to the name of
+the current mailfile.
+Example:
+<DL COMPACT><DT><DD>
+<P>
+
+<B>MAILPATH</B>=aq/var/mail/bfox?&quot;You have mail&quot;:~/shell-mail?&quot;$_ has mail!&quot;aq
+<P>
+
+<B>Bash</B>
+
+can be configured to supply
+a default value for this variable (there is no value by default),
+but the location of the user
+mail files that it uses is system dependent (e.g., /var/mail/<B>$USER</B>).
+</DL>
+
+<DT><B>OPTERR</B>
+
+<DD>
+If set to the value 1,
+<B>bash</B>
+
+displays error messages generated by the
+<B>getopts</B>
+
+builtin command (see
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>
+
+</FONT>
+below).
+<FONT SIZE=-1><B>OPTERR</B>
+
+</FONT>
+is initialized to 1 each time the shell is invoked or a shell
+script is executed.
+<DT><B>PATH</B>
+
+<DD>
+The search path for commands.  It
+is a colon-separated list of directories in which
+the shell looks for commands (see
+<FONT SIZE=-1><B>COMMAND EXECUTION</B>
+
+</FONT>
+below).
+A zero-length (null) directory name in the value of
+<FONT SIZE=-1><B>PATH</B>
+
+</FONT>
+indicates the current directory.
+A null directory name may appear as two adjacent colons, or as an initial
+or trailing colon.
+The default path is system-dependent,
+and is set by the administrator who installs
+<B>bash</B>.
+
+A common value is
+
+<TT>/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin</TT>.
+
+
+<DT><B>POSIXLY_CORRECT</B>
+
+<DD>
+If this variable is in the environment when <B>bash</B> starts, the shell
+enters <I>posix mode</I> before reading the startup files, as if the
+<B>--posix</B>
+
+invocation option had been supplied.  If it is set while the shell is
+running, <B>bash</B> enables <I>posix mode</I>, as if the command
+<TT>set -o posix</TT>
+
+had been executed.
+When the shell enters <I>posix mode</I>, it sets this variable if it was
+not already set.
+<DT><B>PROMPT_COMMAND</B>
+
+<DD>
+If this variable is set, and is an array,
+the value of each set element is executed as a command
+prior to issuing each primary prompt.
+If this is set but not an array variable, 
+its value is used as a command to execute instead.
+<DT><B>PROMPT_DIRTRIM</B>
+
+<DD>
+If set to a number greater than zero, the value is used as the number of
+trailing directory components to retain when expanding the <B>\w</B> and
+<B>\W</B> prompt string escapes (see
+<FONT SIZE=-1><B>PROMPTING</B>
+
+</FONT>
+below).  Characters removed are replaced with an ellipsis.
+<DT><B>PS0</B>
+
+<DD>
+The value of this parameter is expanded (see
+<FONT SIZE=-1><B>PROMPTING</B>
+
+</FONT>
+below) and displayed by interactive shells after reading a command
+and before the command is executed.
+<DT><B>PS1</B>
+
+<DD>
+The value of this parameter is expanded (see
+<FONT SIZE=-1><B>PROMPTING</B>
+
+</FONT>
+below) and used as the primary prompt string.  The default value is
+``<B>\s-\v\$ </B>''.
+<DT><B>PS2</B>
+
+<DD>
+The value of this parameter is expanded as with
+<FONT SIZE=-1><B>PS1</B>
+
+</FONT>
+and used as the secondary prompt string.  The default is
+``<B>&gt; </B>''.
+<DT><B>PS3</B>
+
+<DD>
+The value of this parameter is used as the prompt for the
+<B>select</B>
+
+command (see
+<FONT SIZE=-1><B>SHELL GRAMMAR</B>
+
+</FONT>
+above).
+<DT><B>PS4</B>
+
+<DD>
+The value of this parameter is expanded as with
+<FONT SIZE=-1><B>PS1</B>
+
+</FONT>
+and the value is printed before each command
+<B>bash</B>
+
+displays during an execution trace.  The first character of
+the expanded value of
+<FONT SIZE=-1><B>PS4</B>
+
+</FONT>
+is replicated multiple times, as necessary, to indicate multiple
+levels of indirection.  The default is ``<B>+ </B>''.
+<DT><B>SHELL</B>
+
+<DD>
+This variable expands to the full pathname to the shell.
+If it is not set when the shell starts,
+<B>bash</B>
+
+assigns to it the full pathname of the current user's login shell.
+<DT><B>TIMEFORMAT</B>
+
+<DD>
+The value of this parameter is used as a format string specifying
+how the timing information for pipelines prefixed with the
+<B>time</B>
+
+reserved word should be displayed.
+The <B>%</B> character introduces an escape sequence that is
+expanded to a time value or other information.
+The escape sequences and their meanings are as follows; the
+braces denote optional portions.
+<P>
+<DL COMPACT><DT><DD>
+
+<DL COMPACT>
+<DT><B>%%</B>
+
+<DD>
+A literal <B>%</B>.
+<DT><B>%[</B><I>p</I>][l]R
+
+<DD>
+The elapsed time in seconds.
+<DT><B>%[</B><I>p</I>][l]U
+
+<DD>
+The number of CPU seconds spent in user mode.
+<DT><B>%[</B><I>p</I>][l]S
+
+<DD>
+The number of CPU seconds spent in system mode.
+<DT><B>%P</B>
+
+<DD>
+The CPU percentage, computed as (%U + %S) / %R.
+
+</DL></DL>
+
+<DT><DD>
+The optional <I>p</I> is a digit specifying the <I>precision</I>,
+the number of fractional digits after a decimal point.
+A value of 0 causes no decimal point or fraction to be output.
+At most three places after the decimal point may be specified;
+values of <I>p</I> greater than 3 are changed to 3.
+If <I>p</I> is not specified, the value 3 is used.
+<DT><DD>
+The optional <B>l</B> specifies a longer format, including
+minutes, of the form <I>MM</I>m<I>SS</I>.<I>FF</I>s.
+The value of <I>p</I> determines whether or not the fraction is
+included.
+<DT><DD>
+If this variable is not set, <B>bash</B> acts as if it had the
+value <B>$aq\nreal\t%3lR\nuser\t%3lU\nsys\t%3lSaq</B>.
+If the value is null, no timing information is displayed.
+A trailing newline is added when the format string is displayed.
+
+<DT><B>TMOUT</B>
+
+<DD>
+If set to a value greater than zero,
+<FONT SIZE=-1><B>TMOUT</B>
+
+</FONT>
+is treated as the
+default timeout for the <B>read</B> builtin.
+The <B>select</B> command terminates if input does not arrive
+after
+<FONT SIZE=-1><B>TMOUT</B>
+
+</FONT>
+seconds when input is coming from a terminal.
+In an interactive shell, the value is interpreted as the
+number of seconds to wait for a line of input after issuing the
+primary prompt.
+<B>Bash</B>
+
+terminates after waiting for that number of seconds if a complete
+line of input does not arrive.
+<DT><B>TMPDIR</B>
+
+<DD>
+If set, <B>bash</B> uses its value as the name of a directory in which
+<B>bash</B> creates temporary files for the shell's use.
+<DT><B>auto_resume</B>
+
+<DD>
+This variable controls how the shell interacts with the user and
+job control.  If this variable is set, single word simple
+commands without redirections are treated as candidates for resumption
+of an existing stopped job.  There is no ambiguity allowed; if there is
+more than one job beginning with the string typed, the job most recently
+accessed is selected.  The
+<I>name</I>
+
+of a stopped job, in this context, is the command line used to
+start it.
+If set to the value
+<I>exact</I>,
+
+the string supplied must match the name of a stopped job exactly;
+if set to
+<I>substring</I>,
+
+the string supplied needs to match a substring of the name of a
+stopped job.  The
+<I>substring</I>
+
+value provides functionality analogous to the
+<B>%?</B>
+
+job identifier (see
+<FONT SIZE=-1><B>JOB CONTROL</B>
+
+</FONT>
+below).  If set to any other value, the supplied string must
+be a prefix of a stopped job's name; this provides functionality
+analogous to the <B>%</B><I>string</I> job identifier.
+<DT><B>histchars</B>
+
+<DD>
+The two or three characters which control history expansion
+and tokenization (see
+<FONT SIZE=-1><B>HISTORY EXPANSION</B>
+
+</FONT>
+below).  The first character is the <I>history expansion</I> character,
+the character which signals the start of a history
+expansion, normally `<B>!</B>'.
+The second character is the <I>quick substitution</I>
+character, which is used as shorthand for re-running the previous
+command entered, substituting one string for another in the command.
+The default is `<B>^</B>'.
+The optional third character is the character
+which indicates that the remainder of the line is a comment when found
+as the first character of a word, normally `<B>#</B>'.  The history
+comment character causes history substitution to be skipped for the
+remaining words on the line.  It does not necessarily cause the shell
+parser to treat the rest of the line as a comment.
+
+</DL>
+<A NAME="lbAX">&nbsp;</A>
+<H4>Arrays</H4>
+
+<B>Bash</B>
+
+provides one-dimensional indexed and associative array variables.
+Any variable may be used as an indexed array; the
+<B>declare</B>
+
+builtin will explicitly declare an array.
+There is no maximum
+limit on the size of an array, nor any requirement that members
+be indexed or assigned contiguously.
+Indexed arrays are referenced using integers (including arithmetic
+expressions) and are zero-based; associative arrays are referenced
+using arbitrary strings.
+Unless otherwise noted, indexed array indices must be non-negative integers.
+<P>
+
+An indexed array is created automatically if any variable is assigned to
+using the syntax <I>name</I>[<I>subscript</I>]=<I>value</I>.  The
+<I>subscript</I>
+
+is treated as an arithmetic expression that must evaluate to a number.
+To explicitly declare an indexed array, use
+<B>declare -a </B><I>name</I>
+
+(see
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>
+
+</FONT>
+below).
+<B>declare -a </B><I>name</I>[<I>subscript</I>]
+
+is also accepted; the <I>subscript</I> is ignored.
+<P>
+
+Associative arrays are created using
+<B>declare -A </B><I>name</I>.
+
+<P>
+
+Attributes may be
+specified for an array variable using the
+<B>declare</B>
+
+and
+<B>readonly</B>
+
+builtins.  Each attribute applies to all members of an array.
+<P>
+
+Arrays are assigned to using compound assignments of the form
+<I>name</I>=<B>(</B>value<I>1</I> ... value<I>n</I><B>)</B>, where each
+<I>value</I> may be of the form [<I>subscript</I>]=<I>string</I>.
+Indexed array assignments do not require anything but <I>string</I>.
+Each <I>value</I> in the list is expanded using all the shell expansions
+described below under
+<FONT SIZE=-1><B>EXPANSION</B>.
+
+</FONT>
+When assigning to indexed arrays, if the optional brackets and subscript
+are supplied, that index is assigned to;
+otherwise the index of the element assigned is the last index assigned
+to by the statement plus one.  Indexing starts at zero.
+<P>
+
+When assigning to an associative array, the words in a compound assignment
+may be either assignment statements, for which the subscript is required,
+or a list of words that is interpreted as a sequence of alternating keys
+and values:
+<I>name</I>=<B>( </B><I>key1 value1 key2 value2</I> ...<B>)</B>.
+These are treated identically to
+<I>name</I>=<B>(</B> [<I>key1</I>]=<I>value1</I> [<I>key2</I>]=<I>value2</I> ...<B>)</B>.
+The first word in the list determines how the remaining words
+are interpreted; all assignments in a list must be of the same type.
+When using key/value pairs, the keys may not be missing or empty;
+a final missing value is treated like the empty string.
+<P>
+
+This syntax is also accepted by the
+<B>declare</B>
+
+builtin.  Individual array elements may be assigned to using the
+<I>name</I>[<I>subscript</I>]=<I>value</I> syntax introduced above.
+When assigning to an indexed array, if
+<I>name</I>
+
+is subscripted by a negative number, that number is
+interpreted as relative to one greater than the maximum index of
+<I>name</I>, so negative indices count back from the end of the
+array, and an index of -1 references the last element.
+<P>
+
+Any element of an array may be referenced using
+${<I>name</I>[<I>subscript</I>]}.  The braces are required to avoid
+conflicts with pathname expansion.  If
+<I>subscript</I> is <B>@</B> or <B>*</B>, the word expands to
+all members of <I>name</I>.  These subscripts differ only when the
+word appears within double quotes.  If the word is double-quoted,
+${<I>name</I>[*]} expands to a single
+word with the value of each array member separated by the first
+character of the
+<FONT SIZE=-1><B>IFS</B>
+
+</FONT>
+special variable, and ${<I>name</I>[@]} expands each element of
+<I>name</I> to a separate word.  When there are no array members,
+${<I>name</I>[@]} expands to nothing.
+If the double-quoted expansion occurs within a word, the expansion of
+the first parameter is joined with the beginning part of the original
+word, and the expansion of the last parameter is joined with the last
+part of the original word.
+This is analogous to the expansion
+of the special parameters <B>*</B> and <B>@</B> (see
+<B>Special Parameters</B>
+
+above).  ${#<I>name</I>[<I>subscript</I>]} expands to the length of
+${<I>name</I>[<I>subscript</I>]}.  If <I>subscript</I> is <B>*</B> or
+<B>@</B>, the expansion is the number of elements in the array.
+If the
+<I>subscript</I>
+
+used to reference an element of an indexed array
+evaluates to a number less than zero, it is
+interpreted as relative to one greater than the maximum index of the array,
+so negative indices count back from the end of the
+array, and an index of -1 references the last element.
+<P>
+
+Referencing an array variable without a subscript is equivalent to
+referencing the array with a subscript of 0.
+Any reference to a variable using a valid subscript is legal, and
+<B>bash</B>
+
+will create an array if necessary.
+<P>
+
+An array variable is considered set if a subscript has been assigned a
+value.  The null string is a valid value.
+<P>
+
+It is possible to obtain the keys (indices) of an array as well as the values.
+${<B>!</B><I>name</I>[<I>@</I>]} and ${<B>!</B><I>name</I>[<I>*</I>]}
+expand to the indices assigned in array variable <I>name</I>.
+The treatment when in double quotes is similar to the expansion of the
+special parameters <I>@</I> and <I>*</I> within double quotes.
+<P>
+
+The
+<B>unset</B>
+
+builtin is used to destroy arrays.  <B>unset</B> <I>name</I>[<I>subscript</I>]
+destroys the array element at index <I>subscript</I>,
+for both indexed and associative arrays.
+Negative subscripts to indexed arrays are interpreted as described above.
+Unsetting the last element of an array variable does not unset the variable.
+<B>unset</B> <I>name</I>, where <I>name</I> is an array, or
+<B>unset</B> <I>name</I>[<I>subscript</I>], where
+<I>subscript</I> is <B>*</B> or <B>@</B>, removes the entire array.
+<P>
+
+When using a variable name with a subscript as an argument to a command,
+such as with <B>unset</B>, without using the word expansion syntax
+described above, the argument is subject to pathname expansion.
+If pathname expansion is not desired, the argument should be quoted.
+<P>
+
+The
+<B>declare</B>,
+
+<B>local</B>,
+
+and
+<B>readonly</B>
+
+builtins each accept a
+<B>-a</B>
+
+option to specify an indexed array and a
+<B>-A</B>
+
+option to specify an associative array.
+If both options are supplied,
+<B>-A</B>
+
+takes precedence.
+The
+<B>read</B>
+
+builtin accepts a
+<B>-a</B>
+
+option to assign a list of words read from the standard input
+to an array.  The
+<B>set</B>
+
+and
+<B>declare</B>
+
+builtins display array values in a way that allows them to be
+reused as assignments.
+<A NAME="lbAY">&nbsp;</A>
+<H3>EXPANSION</H3>
+
+Expansion is performed on the command line after it has been split into
+words.  There are seven kinds of expansion performed:
+<I>brace expansion</I>,
+
+<I>tilde expansion</I>,
+
+<I>parameter and variable expansion</I>,
+
+<I>command substitution</I>,
+
+<I>arithmetic expansion</I>,
+
+<I>word splitting</I>,
+
+and
+<I>pathname expansion</I>.
+
+<P>
+
+The order of expansions is:
+brace expansion;
+tilde expansion, parameter and variable expansion, arithmetic expansion,
+and command substitution (done in a left-to-right fashion);
+word splitting;
+and pathname expansion.
+<P>
+
+On systems that can support it, there is an additional expansion
+available: <I>process substitution</I>.
+This is performed at the
+same time as tilde, parameter, variable, and arithmetic expansion and
+command substitution.
+<P>
+
+After these expansions are performed, quote characters present in the
+original word are removed unless they have been quoted themselves
+(<I>quote removal</I>).
+<P>
+
+Only brace expansion, word splitting, and pathname expansion
+can increase the number of words of the expansion; other expansions
+expand a single word to a single word.
+The only exceptions to this are the expansions of
+&quot;<B>$@</B>&quot; and &quot;<B>${</B><I>name</I><B>[@]}</B>&quot;,
+and, in most cases, <B>$*</B> and <B>${</B><I>name</I><B>[*]}</B>
+as explained above (see
+<FONT SIZE=-1><B>PARAMETERS</B>).
+
+</FONT>
+<A NAME="lbAZ">&nbsp;</A>
+<H4>Brace Expansion</H4>
+
+<I>Brace expansion</I>
+
+is a mechanism by which arbitrary strings
+may be generated.  This mechanism is similar to
+<I>pathname expansion</I>, but the filenames generated
+need not exist.  Patterns to be brace expanded take
+the form of an optional
+<I>preamble</I>,
+
+followed by either a series of comma-separated strings or
+a sequence expression between a pair of braces, followed by
+an optional
+<I>postscript</I>.
+
+The preamble is prefixed to each string contained
+within the braces, and the postscript is then appended
+to each resulting string, expanding left to right.
+<P>
+
+Brace expansions may be nested.  The results of each expanded
+string are not sorted; left to right order is preserved.
+For example, a<B>{</B>d,c,b<B>}</B>e expands into `ade ace abe'.
+<P>
+
+A sequence expression takes the form
+<B>{</B><I>x</I><B>..</B><I>y</I><B>[..</B><I>incr</I><B>]}</B>,
+where <I>x</I> and <I>y</I> are either integers or single characters,
+and <I>incr</I>, an optional increment, is an integer.
+When integers are supplied, the expression expands to each number between
+<I>x</I> and <I>y</I>, inclusive.
+Supplied integers may be prefixed with <I>0</I> to force each term to have the
+same width.
+When either <I>x</I> or y begins with a zero, the shell
+attempts to force all generated terms to contain the same number of digits,
+zero-padding where necessary.
+When characters are supplied, the expression expands to each character
+lexicographically between <I>x</I> and <I>y</I>, inclusive,
+using the default C locale.
+Note that both <I>x</I> and <I>y</I> must be of the same type.
+When the increment is supplied, it is used as the difference between
+each term.  The default increment is 1 or -1 as appropriate.
+<P>
+
+Brace expansion is performed before any other expansions,
+and any characters special to other expansions are preserved
+in the result.  It is strictly textual.
+<B>Bash</B>
+
+does not apply any syntactic interpretation to the context of the
+expansion or the text between the braces.
+<P>
+
+A correctly-formed brace expansion must contain unquoted opening
+and closing braces, and at least one unquoted comma or a valid
+sequence expression.
+Any incorrectly formed brace expansion is left unchanged.
+A <B>{</B> or <B>,</B> may be quoted with a backslash to prevent its
+being considered part of a brace expression.
+To avoid conflicts with parameter expansion, the string <B>${</B>
+is not considered eligible for brace expansion, and inhibits brace
+expansion until the closing <B>}</B>.
+<P>
+
+This construct is typically used as shorthand when the common
+prefix of the strings to be generated is longer than in the
+above example:
+<DL COMPACT><DT><DD>
+<P>
+
+mkdir /usr/local/src/bash/{old,new,dist,bugs}
+</DL>
+
+or
+<DL COMPACT><DT><DD>
+chown root /usr/{ucb/{ex,edit},lib/{ex?.?*,how_ex}}
+</DL>
+
+<P>
+
+Brace expansion introduces a slight incompatibility with
+historical versions of
+<B>sh</B>.
+
+<B>sh</B>
+
+does not treat opening or closing braces specially when they
+appear as part of a word, and preserves them in the output.
+<B>Bash</B>
+
+removes braces from words as a consequence of brace
+expansion.  For example, a word entered to
+<B>sh</B>
+
+as <I>file{1,2}</I>
+appears identically in the output.  The same word is
+output as
+<I>file1 file2</I>
+
+after expansion by
+<B>bash</B>.
+
+If strict compatibility with
+<B>sh</B>
+
+is desired, start
+<B>bash</B>
+
+with the
+<B>+B</B>
+
+option or disable brace expansion with the
+<B>+B</B>
+
+option to the
+<B>set</B>
+
+command (see
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>
+
+</FONT>
+below).
+<A NAME="lbBA">&nbsp;</A>
+<H4>Tilde Expansion</H4>
+
+If a word begins with an unquoted tilde character (`<B>~</B>'), all of
+the characters preceding the first unquoted slash (or all characters,
+if there is no unquoted slash) are considered a <I>tilde-prefix</I>.
+If none of the characters in the tilde-prefix are quoted, the
+characters in the tilde-prefix following the tilde are treated as a
+possible <I>login name</I>.
+If this login name is the null string, the tilde is replaced with the
+value of the shell parameter
+<FONT SIZE=-1><B>HOME</B>.
+
+</FONT>
+If
+<FONT SIZE=-1><B>HOME</B>
+
+</FONT>
+is unset, the home directory of the user executing the shell is
+substituted instead.
+Otherwise, the tilde-prefix is replaced with the home directory
+associated with the specified login name.
+<P>
+
+If the tilde-prefix is a `~+', the value of the shell variable
+<FONT SIZE=-1><B>PWD</B>
+
+</FONT>
+replaces the tilde-prefix.
+If the tilde-prefix is a `~-', the value of the shell variable
+<FONT SIZE=-1><B>OLDPWD</B>,
+
+</FONT>
+if it is set, is substituted.
+If the characters following the tilde in the tilde-prefix consist
+of a number <I>N</I>, optionally prefixed
+by a `+' or a `-', the tilde-prefix is replaced with the corresponding
+element from the directory stack, as it would be displayed by the
+<B>dirs</B>
+
+builtin invoked with the tilde-prefix as an argument.
+If the characters following the tilde in the tilde-prefix consist of a
+number without a leading `+' or `-', `+' is assumed.
+<P>
+
+If the login name is invalid, or the tilde expansion fails, the word
+is unchanged.
+<P>
+
+Each variable assignment is checked for unquoted tilde-prefixes immediately
+following a
+<B>:</B>
+
+or the first
+<B>=</B>.
+
+In these cases, tilde expansion is also performed.
+Consequently, one may use filenames with tildes in assignments to
+<FONT SIZE=-1><B>PATH</B>,
+
+</FONT>
+<FONT SIZE=-1><B>MAILPATH</B>,
+
+</FONT>
+and
+<FONT SIZE=-1><B>CDPATH</B>,
+
+</FONT>
+and the shell assigns the expanded value.
+<P>
+
+Bash also performs tilde expansion on words satisfying the conditions of
+variable assignments (as described above under
+<FONT SIZE=-1><B>PARAMETERS</B>)
+
+</FONT>
+when they appear as arguments to simple commands.
+Bash does not do this, except for the <I>declaration</I> commands listed
+above, when in <I>posix mode</I>.
+<A NAME="lbBB">&nbsp;</A>
+<H4>Parameter Expansion</H4>
+
+The `<B>$</B>' character introduces parameter expansion,
+command substitution, or arithmetic expansion.  The parameter name
+or symbol to be expanded may be enclosed in braces, which
+are optional but serve to protect the variable to be expanded from
+characters immediately following it which could be
+interpreted as part of the name.
+<P>
+
+When braces are used, the matching ending brace is the first `<B>}</B>'
+not escaped by a backslash or within a quoted string, and not within an
+embedded arithmetic expansion, command substitution, or parameter
+expansion.
+<P>
+
+
+<DL COMPACT>
+<DT>${<I>parameter</I>}<DD>
+The value of <I>parameter</I> is substituted.  The braces are required
+when
+<I>parameter</I>
+
+is a positional parameter with more than one digit,
+or when
+<I>parameter</I>
+
+is followed by a character which is not to be
+interpreted as part of its name.
+The <I>parameter</I> is a shell parameter as described above
+<B>PARAMETERS</B>) or an array reference (<B>Arrays</B>).
+
+</DL>
+<P>
+
+If the first character of <I>parameter</I> is an exclamation point (<B>!</B>),
+and <I>parameter</I> is not a <I>nameref</I>,
+it introduces a level of indirection.
+<B>Bash</B> uses the value formed by expanding the rest of
+<I>parameter</I> as the new <I>parameter</I>; this is then
+expanded and that value is used in the rest of the expansion, rather
+than the expansion of the original <I>parameter</I>.
+This is known as <I>indirect expansion</I>.
+The value is subject to tilde expansion,
+parameter expansion, command substitution, and arithmetic expansion.
+If <I>parameter</I> is a nameref, this expands to the name of the
+parameter referenced by <I>parameter</I> instead of performing the
+complete indirect expansion.
+The exceptions to this are the expansions of ${<B>!</B><I>prefix</I><B>*</B>} and
+${<B>!</B><I>name</I>[<I>@</I>]} described below.
+The exclamation point must immediately follow the left brace in order to
+introduce indirection.
+<P>
+
+In each of the cases below, <I>word</I> is subject to tilde expansion,
+parameter expansion, command substitution, and arithmetic expansion.
+<P>
+
+When not performing substring expansion, using the forms documented below
+(e.g., <B>:-</B>),
+<B>bash</B> tests for a parameter that is unset or null.  Omitting the colon
+results in a test only for a parameter that is unset.
+<P>
+
+
+<DL COMPACT>
+<DT>${<I>parameter</I><B>:-</B><I>word</I>}<DD>
+<B>Use Default Values</B>.  If
+<I>parameter</I>
+
+is unset or null, the expansion of
+<I>word</I>
+
+is substituted.  Otherwise, the value of
+<I>parameter</I>
+
+is substituted.
+<DT>${<I>parameter</I><B>:=</B><I>word</I>}<DD>
+<B>Assign Default Values</B>.
+If
+<I>parameter</I>
+
+is unset or null, the expansion of
+<I>word</I>
+
+is assigned to
+<I>parameter</I>.
+
+The value of
+<I>parameter</I>
+
+is then substituted.  Positional parameters and special parameters may
+not be assigned to in this way.
+<DT>${<I>parameter</I><B>:?</B><I>word</I>}<DD>
+<B>Display Error if Null or Unset</B>.
+If
+<I>parameter</I>
+
+is null or unset, the expansion of <I>word</I> (or a message to that effect
+if
+<I>word</I>
+
+is not present) is written to the standard error and the shell, if it
+is not interactive, exits.  Otherwise, the value of <I>parameter</I> is
+substituted.
+<DT>${<I>parameter</I><B>:+</B><I>word</I>}<DD>
+<B>Use Alternate Value</B>.
+If
+<I>parameter</I>
+
+is null or unset, nothing is substituted, otherwise the expansion of
+<I>word</I>
+
+is substituted.
+<DT>${<I>parameter</I><B>:</B><I>offset</I>}<DD>
+
+<DT>${<I>parameter</I><B>:</B><I>offset</I><B>:</B><I>length</I>}<DD>
+
+<B>Substring Expansion</B>.
+Expands to up to <I>length</I> characters of the value of <I>parameter</I>
+starting at the character specified by <I>offset</I>.
+If <I>parameter</I> is <B>@</B>, an indexed array subscripted by
+<B>@</B> or <B>*</B>, or an associative array name, the results differ as
+described below.
+If <I>length</I> is omitted, expands to the substring of the value of
+<I>parameter</I> starting at the character specified by <I>offset</I>
+and extending to the end of the value.
+<I>length</I> and <I>offset</I> are arithmetic expressions (see
+<FONT SIZE=-1><B>ARITHMETIC EVALUATION</B>
+
+</FONT>
+below).
+<P>
+If <I>offset</I> evaluates to a number less than zero, the value
+is used as an offset in characters
+from the end of the value of <I>parameter</I>.
+If <I>length</I> evaluates to a number less than zero,
+it is interpreted as an offset in characters
+from the end of the value of <I>parameter</I> rather than
+a number of characters, and the expansion is the characters between
+<I>offset</I> and that result.
+Note that a negative offset must be separated from the colon by at least
+one space to avoid being confused with the <B>:-</B> expansion.
+<P>
+If <I>parameter</I> is <B>@</B>, the result is <I>length</I> positional
+parameters beginning at <I>offset</I>.
+A negative <I>offset</I> is taken relative to one greater than the greatest
+positional parameter, so an offset of -1 evaluates to the last positional
+parameter.
+It is an expansion error if <I>length</I> evaluates to a number less than
+zero.
+<P>
+If <I>parameter</I> is an indexed array name subscripted by @ or *,
+the result is the <I>length</I>
+members of the array beginning with ${<I>parameter</I>[<I>offset</I>]}.
+A negative <I>offset</I> is taken relative to one greater than the maximum
+index of the specified array.
+It is an expansion error if <I>length</I> evaluates to a number less than
+zero.
+<P>
+Substring expansion applied to an associative array produces undefined
+results.
+<P>
+Substring indexing is zero-based unless the positional parameters
+are used, in which case the indexing starts at 1 by default.
+If <I>offset</I> is 0, and the positional parameters are used, <B>$0</B> is
+prefixed to the list.
+<DT>${<B>!</B><I>prefix</I><B>*</B>}<DD>
+
+<DT>${<B>!</B><I>prefix</I><B>@</B>}<DD>
+
+<B>Names matching prefix</B>.
+Expands to the names of variables whose names begin with <I>prefix</I>,
+separated by the first character of the
+<FONT SIZE=-1><B>IFS</B>
+
+</FONT>
+special variable.
+When <I>@</I> is used and the expansion appears within double quotes, each
+variable name expands to a separate word.
+<DT>${<B>!</B><I>name</I>[<I>@</I>]}<DD>
+
+<DT>${<B>!</B><I>name</I>[<I>*</I>]}<DD>
+
+<B>List of array keys</B>.
+If <I>name</I> is an array variable, expands to the list of array indices
+(keys) assigned in <I>name</I>.
+If <I>name</I> is not an array, expands to 0 if <I>name</I> is set and null
+otherwise.
+When <I>@</I> is used and the expansion appears within double quotes, each
+key expands to a separate word.
+<DT>${<B>#</B><I>parameter</I>}<DD>
+<B>Parameter length</B>.
+The length in characters of the value of <I>parameter</I> is substituted.
+If
+<I>parameter</I>
+
+is
+<B>*</B>
+
+or
+<B>@</B>,
+
+the value substituted is the number of positional parameters.
+If
+<I>parameter</I>
+
+is an array name subscripted by
+<B>*</B>
+
+or
+<B>@</B>,
+
+the value substituted is the number of elements in the array.
+If
+<I>parameter</I>
+
+is an indexed array name subscripted by a negative number, that number is
+interpreted as relative to one greater than the maximum index of
+<I>parameter</I>, so negative indices count back from the end of the
+array, and an index of -1 references the last element.
+<DT>${<I>parameter</I><B>#</B><I>word</I>}<DD>
+
+<DT>${<I>parameter</I><B>##</B><I>word</I>}<DD>
+
+<B>Remove matching prefix pattern</B>.
+The
+<I>word</I>
+
+is expanded to produce a pattern just as in pathname
+expansion, and matched against the expanded value of
+<I>parameter</I>
+
+using the rules described under
+<B>Pattern Matching</B>
+
+below.
+If the pattern matches the beginning of
+the value of
+<I>parameter</I>,
+
+then the result of the expansion is the expanded value of
+<I>parameter</I>
+
+with the shortest matching pattern (the ``<B>#</B>'' case) or the
+longest matching pattern (the ``<B>##</B>'' case) deleted.
+If
+<I>parameter</I>
+
+is
+<B>@</B>
+
+or
+<B>*</B>,
+
+the pattern removal operation is applied to each positional
+parameter in turn, and the expansion is the resultant list.
+If
+<I>parameter</I>
+
+is an array variable subscripted with
+<B>@</B>
+
+or
+<B>*</B>,
+
+the pattern removal operation is applied to each member of the
+array in turn, and the expansion is the resultant list.
+<DT>${<I>parameter</I><B>%</B><I>word</I>}<DD>
+
+<DT>${<I>parameter</I><B>%%</B><I>word</I>}<DD>
+
+<B>Remove matching suffix pattern</B>.
+The <I>word</I> is expanded to produce a pattern just as in
+pathname expansion, and matched against the expanded value of
+<I>parameter</I>
+
+using the rules described under
+<B>Pattern Matching</B>
+
+below.
+If the pattern matches a trailing portion of the expanded value of
+<I>parameter</I>,
+
+then the result of the expansion is the expanded value of
+<I>parameter</I>
+
+with the shortest matching pattern (the ``<B>%</B>'' case) or the
+longest matching pattern (the ``<B>%%</B>'' case) deleted.
+If
+<I>parameter</I>
+
+is
+<B>@</B>
+
+or
+<B>*</B>,
+
+the pattern removal operation is applied to each positional
+parameter in turn, and the expansion is the resultant list.
+If
+<I>parameter</I>
+
+is an array variable subscripted with
+<B>@</B>
+
+or
+<B>*</B>,
+
+the pattern removal operation is applied to each member of the
+array in turn, and the expansion is the resultant list.
+<DT>${<I>parameter</I><B>/</B><I>pattern</I><B>/</B><I>string</I>}<DD>
+<B>Pattern substitution</B>.
+The <I>pattern</I> is expanded to produce a pattern just as in
+pathname expansion,
+<I>Parameter</I> is expanded and the longest match of <I>pattern</I>
+against its value is replaced with <I>string</I>.
+The match is performed using the rules described under
+<B>Pattern Matching</B>
+
+below.
+If <I>pattern</I> begins with <B>/</B>, all matches of <I>pattern</I> are
+replaced with <I>string</I>.  Normally only the first match is replaced.
+If <I>pattern</I> begins with <B>#</B>, it must match at the beginning
+of the expanded value of <I>parameter</I>.
+If <I>pattern</I> begins with <B>%</B>, it must match at the end
+of the expanded value of <I>parameter</I>.
+If <I>string</I> is null, matches of <I>pattern</I> are deleted
+and the <B>/</B> following <I>pattern</I> may be omitted.
+If the
+<B>nocasematch</B>
+
+shell option is enabled, the match is performed without regard to the case
+of alphabetic characters.
+If
+<I>parameter</I>
+
+is
+<B>@</B>
+
+or
+<B>*</B>,
+
+the substitution operation is applied to each positional
+parameter in turn, and the expansion is the resultant list.
+If
+<I>parameter</I>
+
+is an array variable subscripted with
+<B>@</B>
+
+or
+<B>*</B>,
+
+the substitution operation is applied to each member of the
+array in turn, and the expansion is the resultant list.
+<DT>${<I>parameter</I><B>^</B><I>pattern</I>}<DD>
+
+<DT>${<I>parameter</I><B>^^</B><I>pattern</I>}<DD>
+<DT>${<I>parameter</I><B>,</B><I>pattern</I>}<DD>
+<DT>${<I>parameter</I><B>,,</B><I>pattern</I>}<DD>
+
+<B>Case modification</B>.
+This expansion modifies the case of alphabetic characters in <I>parameter</I>.
+The <I>pattern</I> is expanded to produce a pattern just as in
+pathname expansion.
+Each character in the expanded value of <I>parameter</I> is tested against
+<I>pattern</I>, and, if it matches the pattern, its case is converted.
+The pattern should not attempt to match more than one character.
+The <B>^</B> operator converts lowercase letters matching <I>pattern</I>
+to uppercase; the <B>,</B> operator converts matching uppercase letters
+to lowercase.
+The <B>^^</B> and <B>,,</B> expansions convert each matched character in the
+expanded value; the <B>^</B> and <B>,</B> expansions match and convert only
+the first character in the expanded value.
+If <I>pattern</I> is omitted, it is treated like a <B>?</B>, which matches
+every character.
+If
+<I>parameter</I>
+
+is
+<B>@</B>
+
+or
+<B>*</B>,
+
+the case modification operation is applied to each positional
+parameter in turn, and the expansion is the resultant list.
+If
+<I>parameter</I>
+
+is an array variable subscripted with
+<B>@</B>
+
+or
+<B>*</B>,
+
+the case modification operation is applied to each member of the
+array in turn, and the expansion is the resultant list.
+<DT>${<I>parameter</I><B>@</B><I>operator</I>}<DD>
+<B>Parameter transformation</B>.
+The expansion is either a transformation of the value of <I>parameter</I>
+or information about <I>parameter</I> itself, depending on the value of
+<I>operator</I>.  Each <I>operator</I> is a single letter:
+<P>
+<DL COMPACT><DT><DD>
+
+<DL COMPACT>
+<DT><B>U</B>
+
+<DD>
+The expansion is a string that is the value of <I>parameter</I> with lowercase
+alphabetic characters converted to uppercase.
+<DT><B>u</B>
+
+<DD>
+The expansion is a string that is the value of <I>parameter</I> with the first
+character converted to uppercase, if it is alphabetic.
+<DT><B>L</B>
+
+<DD>
+The expansion is a string that is the value of <I>parameter</I> with uppercase
+alphabetic characters converted to lowercase.
+<DT><B>Q</B>
+
+<DD>
+The expansion is a string that is the value of <I>parameter</I> quoted in a
+format that can be reused as input.
+<DT><B>E</B>
+
+<DD>
+The expansion is a string that is the value of <I>parameter</I> with backslash
+escape sequences expanded as with the <B>$'...'</B> quoting mechanism.
+<DT><B>P</B>
+
+<DD>
+The expansion is a string that is the result of expanding the value of
+<I>parameter</I> as if it were a prompt string (see <B>PROMPTING</B> below).
+<DT><B>A</B>
+
+<DD>
+The expansion is a string in the form of
+an assignment statement or <B>declare</B> command that, if
+evaluated, will recreate <I>parameter</I> with its attributes and value.
+<DT><B>K</B>
+
+<DD>
+Produces a possibly-quoted version of the value of <I>parameter</I>,
+except that it prints the values of
+indexed and associative arrays as a sequence of quoted key-value pairs
+(see <B>Arrays</B> above).
+<DT><B>a</B>
+
+<DD>
+The expansion is a string consisting of flag values representing
+<I>parameter</I>'s attributes.
+
+</DL>
+<P>
+
+If
+<I>parameter</I>
+
+is
+<B>@</B>
+
+or
+<B>*</B>,
+
+the operation is applied to each positional
+parameter in turn, and the expansion is the resultant list.
+If
+<I>parameter</I>
+
+is an array variable subscripted with
+<B>@</B>
+
+or
+<B>*</B>,
+
+the operation is applied to each member of the
+array in turn, and the expansion is the resultant list.
+<P>
+The result of the expansion is subject to word splitting and pathname
+expansion as described below.
+</DL>
+
+</DL>
+<A NAME="lbBC">&nbsp;</A>
+<H4>Command Substitution</H4>
+
+<I>Command substitution</I> allows the output of a command to replace
+the command name.  There are two forms:
+<DL COMPACT><DT><DD>
+<P>
+
+<B>$(</B><I>command</I><B>)</B>
+</DL>
+
+or
+<DL COMPACT><DT><DD>
+<B>`</B><I>command</I><B>`</B>
+</DL>
+
+<P>
+
+<B>Bash</B>
+
+performs the expansion by executing <I>command</I> in a subshell environment
+and replacing the command substitution with the standard output of the
+command, with any trailing newlines deleted.
+Embedded newlines are not deleted, but they may be removed during
+word splitting.
+The command substitution <B>$(cat </B><I>file</I>) can be replaced by
+the equivalent but faster <B>$(&lt; </B><I>file</I>).
+<P>
+
+When the old-style backquote form of substitution is used,
+backslash retains its literal meaning except when followed by
+<B>$</B>,
+
+<B>`</B>,
+
+or
+<B>\</B>.
+
+The first backquote not preceded by a backslash terminates the
+command substitution.
+When using the $(<I>command</I>) form, all characters between the
+parentheses make up the command; none are treated specially.
+<P>
+
+Command substitutions may be nested.  To nest when using the backquoted form,
+escape the inner backquotes with backslashes.
+<P>
+
+If the substitution appears within double quotes, word splitting and
+pathname expansion are not performed on the results.
+<A NAME="lbBD">&nbsp;</A>
+<H4>Arithmetic Expansion</H4>
+
+Arithmetic expansion allows the evaluation of an arithmetic expression
+and the substitution of the result.  The format for arithmetic expansion is:
+<DL COMPACT><DT><DD>
+<P>
+
+<B>$((</B><I>expression</I><B>))</B>
+</DL>
+
+<P>
+
+The
+<I>expression</I>
+
+is treated as if it were within double quotes, but a double quote
+inside the parentheses is not treated specially.
+All tokens in the expression undergo parameter and variable expansion,
+command substitution, and quote removal.
+The result is treated as the arithmetic expression to be evaluated.
+Arithmetic expansions may be nested.
+<P>
+
+The evaluation is performed according to the rules listed below under
+<FONT SIZE=-1><B>ARITHMETIC EVALUATION</B>.
+
+</FONT>
+If
+<I>expression</I>
+
+is invalid,
+<B>bash</B>
+
+prints a message indicating failure and no substitution occurs.
+<A NAME="lbBE">&nbsp;</A>
+<H4>Process Substitution</H4>
+
+<I>Process substitution</I> allows a process's input or output to be
+referred to using a filename.
+It takes the form of
+<B>&lt;(</B><I>list</I><B>)</B>
+or
+<B>&gt;(</B><I>list</I><B>)</B>.
+The process <I>list</I> is run asynchronously, and its input or output
+appears as a filename.
+This filename is
+passed as an argument to the current command as the result of the
+expansion.
+If the <B>&gt;(</B><I>list</I><B>)</B> form is used, writing to
+the file will provide input for <I>list</I>.  If the
+<B>&lt;(</B><I>list</I><B>)</B> form is used, the file passed as an
+argument should be read to obtain the output of <I>list</I>.
+Process substitution is supported on systems that support named
+pipes (<I>FIFOs</I>) or the <B>/dev/fd</B> method of naming open files.
+<P>
+
+When available, process substitution is performed
+simultaneously with parameter and variable expansion,
+command substitution,
+and arithmetic expansion.
+<A NAME="lbBF">&nbsp;</A>
+<H4>Word Splitting</H4>
+
+The shell scans the results of
+parameter expansion,
+command substitution,
+and
+arithmetic expansion
+that did not occur within double quotes for
+<I>word splitting</I>.
+
+<P>
+
+The shell treats each character of
+<FONT SIZE=-1><B>IFS</B>
+
+</FONT>
+as a delimiter, and splits the results of the other
+expansions into words using these characters as field terminators.
+If
+<FONT SIZE=-1><B>IFS</B>
+
+</FONT>
+is unset, or its
+value is exactly
+<B>&lt;space&gt;&lt;tab&gt;&lt;newline&gt;</B>,
+
+the default, then
+sequences of
+<B>&lt;space&gt;</B>,
+
+<B>&lt;tab&gt;</B>,
+
+and
+<B>&lt;newline&gt;</B>
+
+at the beginning and end of the results of the previous
+expansions are ignored, and
+any sequence of
+<FONT SIZE=-1><B>IFS</B>
+
+</FONT>
+characters not at the beginning or end serves to delimit words.
+If
+<FONT SIZE=-1><B>IFS</B>
+
+</FONT>
+has a value other than the default, then sequences of
+the whitespace characters
+<B>space</B>,
+
+<B>tab</B>,
+
+and
+<B>newline</B>
+
+are ignored at the beginning and end of the
+word, as long as the whitespace character is in the
+value of
+<FONT SIZE=-1><B>IFS</B>
+
+</FONT>
+(an
+<FONT SIZE=-1><B>IFS</B>
+
+</FONT>
+whitespace character).
+Any character in
+<FONT SIZE=-1><B>IFS</B>
+
+</FONT>
+that is not
+<FONT SIZE=-1><B>IFS</B>
+
+</FONT>
+whitespace, along with any adjacent
+<FONT SIZE=-1><B>IFS</B>
+
+</FONT>
+whitespace characters, delimits a field.
+A sequence of
+<FONT SIZE=-1><B>IFS</B>
+
+</FONT>
+whitespace characters is also treated as a delimiter.
+If the value of
+<FONT SIZE=-1><B>IFS</B>
+
+</FONT>
+is null, no word splitting occurs.
+<P>
+
+Explicit null arguments (<B>&quot;&quot;</B> or <B>aqaq</B>) are retained
+and passed to commands as empty strings.
+Unquoted implicit null arguments, resulting from the expansion of
+parameters that have no values, are removed.
+If a parameter with no value is expanded within double quotes, a
+null argument results and is retained
+and passed to a command as an empty string.
+When a quoted null argument appears as part of a word whose expansion is
+non-null, the null argument is removed.
+That is, the word
+<TT>-daqaq</TT> becomes <TT>-d</TT> after word splitting and
+null argument removal.
+<P>
+
+Note that if no expansion occurs, no splitting
+is performed.
+<A NAME="lbBG">&nbsp;</A>
+<H4>Pathname Expansion</H4>
+
+After word splitting,
+unless the
+<B>-f</B>
+
+option has been set,
+<B>bash</B>
+
+scans each word for the characters
+<B>*</B>,
+
+<B>?</B>,
+
+and
+<B>[</B>.
+
+If one of these characters appears, and is not quoted, then the word is
+regarded as a
+<I>pattern</I>,
+
+and replaced with an alphabetically sorted list of
+filenames matching the pattern
+(see
+<FONT SIZE=-1><B>Pattern Matching</B>
+
+</FONT>
+below).
+If no matching filenames are found,
+and the shell option
+<B>nullglob</B>
+
+is not enabled, the word is left unchanged.
+If the
+<B>nullglob</B>
+
+option is set, and no matches are found,
+the word is removed.
+If the
+<B>failglob</B>
+
+shell option is set, and no matches are found, an error message
+is printed and the command is not executed.
+If the shell option
+<B>nocaseglob</B>
+
+is enabled, the match is performed without regard to the case
+of alphabetic characters.
+When a pattern is used for pathname expansion,
+the character
+<B>``.''</B>
+
+at the start of a name or immediately following a slash
+must be matched explicitly, unless the shell option
+<B>dotglob</B>
+
+is set.
+The filenames
+<B>``.''</B>
+
+and
+<B>``..''</B>
+
+must always be matched explicitly, even if
+<B>dotglob</B>
+
+is set.
+In other cases, the
+<B>``.''</B>
+
+character is not treated specially.
+When matching a pathname, the slash character must always be
+matched explicitly by a slash in the pattern, but in other matching
+contexts it can be matched by a special pattern character as described
+below under
+<FONT SIZE=-1><B>Pattern Matching</B>.
+
+</FONT>
+See the description of
+<B>shopt</B>
+
+below under
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>
+
+</FONT>
+for a description of the
+<B>nocaseglob</B>,
+
+<B>nullglob</B>,
+
+<B>failglob</B>,
+
+and
+<B>dotglob</B>
+
+shell options.
+<P>
+
+The
+<FONT SIZE=-1><B>GLOBIGNORE</B>
+
+</FONT>
+shell variable may be used to restrict the set of file names matching a
+<I>pattern</I>.
+
+If
+<FONT SIZE=-1><B>GLOBIGNORE</B>
+
+</FONT>
+is set, each matching file name that also matches one of the patterns in
+<FONT SIZE=-1><B>GLOBIGNORE</B>
+
+</FONT>
+is removed from the list of matches.
+If the <B>nocaseglob</B> option is set, the matching against the patterns in
+<FONT SIZE=-1><B>GLOBIGNORE</B>
+
+</FONT>
+is performed without regard to case.
+The filenames
+<B>``.''</B>
+
+and
+<B>``..''</B>
+
+are always ignored when
+<FONT SIZE=-1><B>GLOBIGNORE</B>
+
+</FONT>
+is set and not null.  However, setting
+<FONT SIZE=-1><B>GLOBIGNORE</B>
+
+</FONT>
+to a non-null value has the effect of enabling the
+<B>dotglob</B>
+
+shell option, so all other filenames beginning with a
+<B>``.''</B>
+
+will match.
+To get the old behavior of ignoring filenames beginning with a
+<B>``.''</B>,
+
+make
+<B>``.*''</B>
+
+one of the patterns in
+<FONT SIZE=-1><B>GLOBIGNORE</B>.
+
+</FONT>
+The
+<B>dotglob</B>
+
+option is disabled when
+<FONT SIZE=-1><B>GLOBIGNORE</B>
+
+</FONT>
+is unset.
+The pattern matching honors the setting of the <B>extglob</B> shell
+option.
+<P>
+
+<B>Pattern Matching</B>
+<P>
+
+Any character that appears in a pattern, other than the special pattern
+characters described below, matches itself.  The NUL character may not
+occur in a pattern.  A backslash escapes the following character; the
+escaping backslash is discarded when matching.
+The special pattern characters must be quoted if
+they are to be matched literally.
+<P>
+
+The special pattern characters have the following meanings:
+<P>
+
+
+<DL COMPACT><DT><DD>
+<DL COMPACT>
+<DT><B>*</B>
+
+<DD>
+Matches any string, including the null string.
+When the <B>globstar</B> shell option is enabled, and <B>*</B> is used in
+a pathname expansion context, two adjacent <B>*</B>s used as a single
+pattern will match all files and zero or more directories and
+subdirectories.
+If followed by a <B>/</B>, two adjacent <B>*</B>s will match only directories
+and subdirectories.
+<DT><B>?</B>
+
+<DD>
+Matches any single character.
+<DT><B>[...]</B>
+
+<DD>
+Matches any one of the enclosed characters.  A pair of characters
+separated by a hyphen denotes a
+<I>range expression</I>;
+any character that falls between those two characters, inclusive,
+using the current locale's collating sequence and character set,
+is matched.  If the first character following the
+<B>[</B>
+
+is a
+<B>!</B>
+
+or a
+<B>^</B>
+
+then any character not enclosed is matched.
+The sorting order of characters in range expressions is determined by
+the current locale and the values of the
+<FONT SIZE=-1><B>LC_COLLATE</B>
+
+</FONT>
+or
+<FONT SIZE=-1><B>LC_ALL</B>
+
+</FONT>
+shell variables, if set.
+To obtain the traditional interpretation of range expressions, where
+<B>[a-d]</B>
+
+is equivalent to
+<B>[abcd]</B>,
+
+set value of the
+<B>LC_ALL</B>
+
+shell variable to
+<B>C</B>,
+
+or enable the
+<B>globasciiranges</B>
+
+shell option.
+A
+<B>-</B>
+
+may be matched by including it as the first or last character
+in the set.
+A
+<B>]</B>
+
+may be matched by including it as the first character
+in the set.
+<BR>
+
+<P>
+
+
+Within
+<B>[</B>
+
+and
+<B>]</B>,
+
+<I>character classes</I> can be specified using the syntax
+<B>[:</B><I>class</I><B>:]</B>, where <I>class</I> is one of the
+following classes defined in the POSIX standard:
+</DL>
+<P>
+
+<DL COMPACT><DT><DD>
+<B>
+</B>
+
+alnum   alpha   ascii   blank   cntrl   digit   graph   lower   print   punct   space   upper   word   xdigit
+<BR>
+
+A character class matches any character belonging to that class.
+The <B>word</B> character class matches letters, digits, and the character _.
+<BR>
+
+<P>
+
+
+Within
+<B>[</B>
+
+and
+<B>]</B>,
+
+an <I>equivalence class</I> can be specified using the syntax
+<B>[=</B><I>c</I><B>=]</B>, which matches all characters with the
+same collation weight (as defined by the current locale) as
+the character <I>c</I>.
+<BR>
+
+<P>
+
+
+Within
+<B>[</B>
+
+and
+<B>]</B>,
+
+the syntax <B>[.</B><I>symbol</I><B>.]</B> matches the collating symbol
+<I>symbol</I>.
+</DL>
+
+</DL>
+
+
+<P>
+
+If the <B>extglob</B> shell option is enabled using the <B>shopt</B>
+builtin, several extended pattern matching operators are recognized.
+In the following description, a <I>pattern-list</I> is a list of one
+or more patterns separated by a <B>|</B>.
+Composite patterns may be formed using one or more of the following
+sub-patterns:
+<P>
+
+<DL COMPACT><DT><DD>
+<DL COMPACT>
+<DT><B>?(</B><I>pattern-list</I><B>)</B><DD>
+Matches zero or one occurrence of the given patterns
+<DT><B>*(</B><I>pattern-list</I><B>)</B><DD>
+Matches zero or more occurrences of the given patterns
+<DT><B>+(</B><I>pattern-list</I><B>)</B><DD>
+Matches one or more occurrences of the given patterns
+<DT><B>@(</B><I>pattern-list</I><B>)</B><DD>
+Matches one of the given patterns
+<DT><B>!(</B><I>pattern-list</I><B>)</B><DD>
+Matches anything except one of the given patterns
+</DL></DL>
+
+
+<P>
+
+Complicated extended pattern matching against long strings is slow,
+especially when the patterns contain alternations and the strings
+contain multiple matches.
+Using separate matches against shorter strings, or using arrays of
+strings instead of a single long string, may be faster.
+<A NAME="lbBH">&nbsp;</A>
+<H4>Quote Removal</H4>
+
+After the preceding expansions, all unquoted occurrences of the
+characters
+<B>\</B>,
+
+<B>aq</B>,
+
+and <B>&quot;</B> that did not result from one of the above
+expansions are removed.
+<A NAME="lbBI">&nbsp;</A>
+<H3>REDIRECTION</H3>
+
+Before a command is executed, its input and output
+may be
+<I>redirected</I>
+
+using a special notation interpreted by the shell.
+Redirection allows commands' file handles to be
+duplicated, opened, closed,
+made to refer to different files,
+and can change the files the command reads from and writes to.
+Redirection may also be used to modify file handles in the
+current shell execution environment.
+The following redirection
+operators may precede or appear anywhere within a
+<I>simple command</I>
+
+or may follow a
+<I>command</I>.
+
+Redirections are processed in the order they appear, from
+left to right.
+<P>
+
+Each redirection that may be preceded by a file descriptor number
+may instead be preceded by a word of the form {<I>varname</I>}.
+In this case, for each redirection operator except
+&gt;&amp;- and &lt;&amp;-, the shell will allocate a file descriptor greater
+than or equal to 10 and assign it to <I>varname</I>.
+If &gt;&amp;- or &lt;&amp;- is preceded
+by {<I>varname</I>}, the value of <I>varname</I> defines the file
+descriptor to close.
+If {<I>varname</I>} is supplied, the redirection persists beyond
+the scope of the command, allowing the shell programmer to manage
+the file descriptor himself.
+<P>
+
+In the following descriptions, if the file descriptor number is
+omitted, and the first character of the redirection operator is
+<B>&lt;</B>,
+
+the redirection refers to the standard input (file descriptor
+0).  If the first character of the redirection operator is
+<B>&gt;</B>,
+
+the redirection refers to the standard output (file descriptor
+1).
+<P>
+
+The word following the redirection operator in the following
+descriptions, unless otherwise noted, is subjected to
+brace expansion, tilde expansion, parameter and variable expansion,
+command substitution, arithmetic expansion, quote removal,
+pathname expansion, and word splitting.
+If it expands to more than one word,
+<B>bash</B>
+
+reports an error.
+<P>
+
+Note that the order of redirections is significant.  For example,
+the command
+<DL COMPACT><DT><DD>
+<P>
+
+ls <B>&gt;</B> dirlist 2<B>&gt;&amp;</B>1
+</DL>
+
+<P>
+
+directs both standard output and standard error to the file
+<I>dirlist</I>,
+
+while the command
+<DL COMPACT><DT><DD>
+<P>
+
+ls 2<B>&gt;&amp;</B>1 <B>&gt;</B> dirlist
+</DL>
+
+<P>
+
+directs only the standard output to file
+<I>dirlist</I>,
+
+because the standard error was duplicated from the standard output
+before the standard output was redirected to
+<I>dirlist</I>.
+
+<P>
+
+<B>Bash</B> handles several filenames specially when they are used in
+redirections, as described in the following table.
+If the operating system on which <B>bash</B> is running provides these
+special files, bash will use them; otherwise it will emulate them
+internally with the behavior described below.
+<DL COMPACT><DT><DD>
+<P>
+
+
+<DL COMPACT>
+<DT><B>/dev/fd/</B><I>fd</I>
+
+<DD>
+If <I>fd</I> is a valid integer, file descriptor <I>fd</I> is duplicated.
+<DT><B>/dev/stdin</B>
+
+<DD>
+File descriptor 0 is duplicated.
+<DT><B>/dev/stdout</B>
+
+<DD>
+File descriptor 1 is duplicated.
+<DT><B>/dev/stderr</B>
+
+<DD>
+File descriptor 2 is duplicated.
+<DT><B>/dev/tcp/</B><I>host</I>/<I>port</I>
+
+<DD>
+If <I>host</I> is a valid hostname or Internet address, and <I>port</I>
+is an integer port number or service name, <B>bash</B> attempts to open
+the corresponding TCP socket.
+<DT><B>/dev/udp/</B><I>host</I>/<I>port</I>
+
+<DD>
+If <I>host</I> is a valid hostname or Internet address, and <I>port</I>
+is an integer port number or service name, <B>bash</B> attempts to open
+the corresponding UDP socket.
+
+</DL></DL>
+
+<P>
+
+A failure to open or create a file causes the redirection to fail.
+<P>
+
+Redirections using file descriptors greater than 9 should be used with
+care, as they may conflict with file descriptors the shell uses
+internally.
+<A NAME="lbBJ">&nbsp;</A>
+<H4>Redirecting Input</H4>
+
+Redirection of input causes the file whose name results from
+the expansion of
+<I>word</I>
+
+to be opened for reading on file descriptor
+<I>n</I>,
+
+or the standard input (file descriptor 0) if
+<I>n</I>
+
+is not specified.
+<P>
+
+The general format for redirecting input is:
+<DL COMPACT><DT><DD>
+<P>
+
+[<I>n</I>]<B>&lt;</B><I>word</I>
+</DL>
+
+<A NAME="lbBK">&nbsp;</A>
+<H4>Redirecting Output</H4>
+
+Redirection of output causes the file whose name results from
+the expansion of
+<I>word</I>
+
+to be opened for writing on file descriptor
+<I>n</I>,
+
+or the standard output (file descriptor 1) if
+<I>n</I>
+
+is not specified.  If the file does not exist it is created;
+if it does exist it is truncated to zero size.
+<P>
+
+The general format for redirecting output is:
+<DL COMPACT><DT><DD>
+<P>
+
+[<I>n</I>]<B>&gt;</B><I>word</I>
+</DL>
+
+<P>
+
+If the redirection operator is
+<B>&gt;</B>,
+
+and the
+<B>noclobber</B>
+
+option to the
+<B>set</B>
+
+builtin has been enabled, the redirection will fail if the file
+whose name results from the expansion of <I>word</I> exists and is
+a regular file.
+If the redirection operator is
+<B>&gt;|</B>,
+
+or the redirection operator is
+<B>&gt;</B>
+
+and the
+<B>noclobber</B>
+
+option to the
+<B>set</B>
+
+builtin command is not enabled, the redirection is attempted even
+if the file named by <I>word</I> exists.
+<A NAME="lbBL">&nbsp;</A>
+<H4>Appending Redirected Output</H4>
+
+Redirection of output in this fashion
+causes the file whose name results from
+the expansion of
+<I>word</I>
+
+to be opened for appending on file descriptor
+<I>n</I>,
+
+or the standard output (file descriptor 1) if
+<I>n</I>
+
+is not specified.  If the file does not exist it is created.
+<P>
+
+The general format for appending output is:
+<DL COMPACT><DT><DD>
+<P>
+
+[<I>n</I>]<B>&gt;&gt;</B><I>word</I>
+</DL>
+
+<A NAME="lbBM">&nbsp;</A>
+<H4>Redirecting Standard Output and Standard Error</H4>
+
+This construct allows both the
+standard output (file descriptor 1) and
+the standard error output (file descriptor 2)
+to be redirected to the file whose name is the
+expansion of
+<I>word</I>.
+
+<P>
+
+There are two formats for redirecting standard output and
+standard error:
+<DL COMPACT><DT><DD>
+<P>
+
+<B>&amp;&gt;</B><I>word</I>
+</DL>
+
+and
+<DL COMPACT><DT><DD>
+<B>&gt;&amp;</B><I>word</I>
+</DL>
+
+<P>
+
+Of the two forms, the first is preferred.
+This is semantically equivalent to
+<DL COMPACT><DT><DD>
+<P>
+
+<B>&gt;</B><I>word</I> 2<B>&gt;&amp;</B>1
+</DL>
+
+<P>
+
+When using the second form, <I>word</I> may not expand to a number or
+<B>-</B>.  If it does, other redirection operators apply
+(see <B>Duplicating File Descriptors</B> below) for compatibility
+reasons.
+<A NAME="lbBN">&nbsp;</A>
+<H4>Appending Standard Output and Standard Error</H4>
+
+This construct allows both the
+standard output (file descriptor 1) and
+the standard error output (file descriptor 2)
+to be appended to the file whose name is the
+expansion of
+<I>word</I>.
+
+<P>
+
+The format for appending standard output and standard error is:
+<DL COMPACT><DT><DD>
+<P>
+
+<B>&amp;&gt;&gt;</B><I>word</I>
+</DL>
+
+<P>
+
+This is semantically equivalent to
+<DL COMPACT><DT><DD>
+<P>
+
+<B>&gt;&gt;</B><I>word</I> 2<B>&gt;&amp;</B>1
+</DL>
+
+<P>
+
+(see <B>Duplicating File Descriptors</B> below).
+<A NAME="lbBO">&nbsp;</A>
+<H4>Here Documents</H4>
+
+This type of redirection instructs the shell to read input from the
+current source until a line containing only
+<I>delimiter</I>
+
+(with no trailing blanks)
+is seen.  All of
+the lines read up to that point are then used as the standard
+input (or file descriptor <I>n</I> if <I>n</I> is specified) for a command.
+<P>
+
+The format of here-documents is:
+<DL COMPACT><DT><DD>
+<P>
+
+<PRE>
+[<I>n</I>]<B>&lt;&lt;</B>[<B>-</B>]<I>word</I>
+        <I>here-document</I>
+<I>delimiter</I>
+</PRE>
+
+</DL>
+
+<P>
+
+No parameter and variable expansion, command substitution,
+arithmetic expansion, or pathname expansion is performed on
+<I>word</I>.
+
+If any part of
+<I>word</I>
+
+is quoted, the
+<I>delimiter</I>
+
+is the result of quote removal on
+<I>word</I>,
+
+and the lines in the here-document are not expanded.
+If <I>word</I> is unquoted,
+all lines of the here-document are subjected to
+parameter expansion, command substitution, and arithmetic expansion,
+the character sequence
+<B>\&lt;newline&gt;</B>
+
+is ignored, and
+<B>\</B>
+
+must be used to quote the characters
+<B>\</B>,
+
+<B>$</B>,
+
+and
+<B>`</B>.
+
+<P>
+
+If the redirection operator is
+<B>&lt;&lt;-</B>,
+
+then all leading tab characters are stripped from input lines and the
+line containing
+<I>delimiter</I>.
+
+This allows
+here-documents within shell scripts to be indented in a
+natural fashion.
+<A NAME="lbBP">&nbsp;</A>
+<H4>Here Strings</H4>
+
+A variant of here documents, the format is:
+<DL COMPACT><DT><DD>
+<P>
+
+<PRE>
+[<I>n</I>]<B>&lt;&lt;&lt;</B><I>word</I>
+</PRE>
+
+</DL>
+
+<P>
+
+The <I>word</I> undergoes
+tilde expansion, parameter and variable expansion,
+command substitution, arithmetic expansion, and quote removal.
+Pathname expansion and word splitting are not performed.
+The result is supplied as a single string, with a newline appended,
+to the command on its
+standard input (or file descriptor <I>n</I> if <I>n</I> is specified).
+<A NAME="lbBQ">&nbsp;</A>
+<H4>Duplicating File Descriptors</H4>
+
+The redirection operator
+<DL COMPACT><DT><DD>
+<P>
+
+[<I>n</I>]<B>&lt;&amp;</B><I>word</I>
+</DL>
+
+<P>
+
+is used to duplicate input file descriptors.
+If
+<I>word</I>
+
+expands to one or more digits, the file descriptor denoted by
+<I>n</I>
+
+is made to be a copy of that file descriptor.
+If the digits in
+<I>word</I>
+
+do not specify a file descriptor open for input, a redirection error occurs.
+If
+<I>word</I>
+
+evaluates to
+<B>-</B>,
+
+file descriptor
+<I>n</I>
+
+is closed.  If
+<I>n</I>
+
+is not specified, the standard input (file descriptor 0) is used.
+<P>
+
+The operator
+<DL COMPACT><DT><DD>
+<P>
+
+[<I>n</I>]<B>&gt;&amp;</B><I>word</I>
+</DL>
+
+<P>
+
+is used similarly to duplicate output file descriptors.  If
+<I>n</I>
+
+is not specified, the standard output (file descriptor 1) is used.
+If the digits in
+<I>word</I>
+
+do not specify a file descriptor open for output, a redirection error occurs.
+If
+<I>word</I>
+
+evaluates to
+<B>-</B>,
+
+file descriptor
+<I>n</I>
+
+is closed.
+As a special case, if <I>n</I> is omitted, and <I>word</I> does not
+expand to one or more digits or <B>-</B>, the standard output and standard
+error are redirected as described previously.
+<A NAME="lbBR">&nbsp;</A>
+<H4>Moving File Descriptors</H4>
+
+The redirection operator
+<DL COMPACT><DT><DD>
+<P>
+
+[<I>n</I>]<B>&lt;&amp;</B><I>digit</I><B>-</B>
+</DL>
+
+<P>
+
+moves the file descriptor <I>digit</I> to file descriptor
+<I>n</I>,
+
+or the standard input (file descriptor 0) if <I>n</I> is not specified.
+<I>digit</I> is closed after being duplicated to <I>n</I>.
+<P>
+
+Similarly, the redirection operator
+<DL COMPACT><DT><DD>
+<P>
+
+[<I>n</I>]<B>&gt;&amp;</B><I>digit</I><B>-</B>
+</DL>
+
+<P>
+
+moves the file descriptor <I>digit</I> to file descriptor
+<I>n</I>,
+
+or the standard output (file descriptor 1) if <I>n</I> is not specified.
+<A NAME="lbBS">&nbsp;</A>
+<H4>Opening File Descriptors for Reading and Writing</H4>
+
+The redirection operator
+<DL COMPACT><DT><DD>
+<P>
+
+[<I>n</I>]<B>&lt;&gt;</B><I>word</I>
+</DL>
+
+<P>
+
+causes the file whose name is the expansion of
+<I>word</I>
+
+to be opened for both reading and writing on file descriptor
+<I>n</I>,
+
+or on file descriptor 0 if
+<I>n</I>
+
+is not specified.  If the file does not exist, it is created.
+<A NAME="lbBT">&nbsp;</A>
+<H3>ALIASES</H3>
+
+<I>Aliases</I> allow a string to be substituted for a word when it is used
+as the first word of a simple command.
+The shell maintains a list of aliases that may be set and unset with the
+<B>alias</B>
+
+and
+<B>unalias</B>
+
+builtin commands (see
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>
+
+</FONT>
+below).
+The first word of each simple command, if unquoted,
+is checked to see if it has an
+alias.  If so, that word is replaced by the text of the alias.
+The characters <B>/</B>, <B>$</B>, <B>`</B>, and <B>=</B> and
+any of the shell <I>metacharacters</I> or quoting characters
+listed above may not appear in an alias name.
+The replacement text may contain any valid shell input,
+including shell metacharacters.
+The first word of the replacement text is tested
+for aliases, but a word that is identical to an alias being expanded
+is not expanded a second time.
+This means that one may alias
+<B>ls</B>
+
+to
+<B>ls -F</B>,
+
+for instance, and
+<B>bash</B>
+
+does not try to recursively expand the replacement text.
+If the last character of the alias value is a
+<I>blank</I>,
+
+then the next command
+word following the alias is also checked for alias expansion.
+<P>
+
+Aliases are created and listed with the
+<B>alias</B>
+
+command, and removed with the
+<B>unalias</B>
+
+command.
+<P>
+
+There is no mechanism for using arguments in the replacement text.
+If arguments are needed, a shell function should be used (see
+<FONT SIZE=-1><B>FUNCTIONS</B>
+
+</FONT>
+below).
+<P>
+
+Aliases are not expanded when the shell is not interactive, unless
+the
+<B>expand_aliases</B>
+
+shell option is set using
+<B>shopt</B>
+
+(see the description of
+<B>shopt</B>
+
+under
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B></FONT>
+below).
+<P>
+
+The rules concerning the definition and use of aliases are
+somewhat confusing.
+<B>Bash</B>
+
+always reads at least one complete line of input,
+and all lines that make up a compound command,
+before executing any of the commands on that line or the compound command.
+Aliases are expanded when a
+command is read, not when it is executed.  Therefore, an
+alias definition appearing on the same line as another
+command does not take effect until the next line of input is read.
+The commands following the alias definition
+on that line are not affected by the new alias.
+This behavior is also an issue when functions are executed.
+Aliases are expanded when a function definition is read,
+not when the function is executed, because a function definition
+is itself a command.  As a consequence, aliases
+defined in a function are not available until after that
+function is executed.  To be safe, always put
+alias definitions on a separate line, and do not use
+<B>alias</B>
+
+in compound commands.
+<P>
+
+For almost every purpose, aliases are superseded by
+shell functions.
+<A NAME="lbBU">&nbsp;</A>
+<H3>FUNCTIONS</H3>
+
+A shell function, defined as described above under
+<FONT SIZE=-1><B>SHELL GRAMMAR</B>,
+
+</FONT>
+stores a series of commands for later execution.
+When the name of a shell function is used as a simple command name,
+the list of commands associated with that function name is executed.
+Functions are executed in the context of the
+current shell; no new process is created to interpret
+them (contrast this with the execution of a shell script).
+When a function is executed, the arguments to the
+function become the positional parameters
+during its execution.
+The special parameter
+<B>#</B>
+
+is updated to reflect the change.  Special parameter <B>0</B>
+is unchanged.
+The first element of the
+<FONT SIZE=-1><B>FUNCNAME</B>
+
+</FONT>
+variable is set to the name of the function while the function
+is executing.
+<P>
+
+All other aspects of the shell execution
+environment are identical between a function and its caller
+with these exceptions: the
+<FONT SIZE=-1><B>DEBUG</B>
+
+</FONT>
+and
+<B>RETURN</B>
+
+traps (see the description of the
+<B>trap</B>
+
+builtin under
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>
+
+</FONT>
+below) are not inherited unless the function has been given the
+<B>trace</B> attribute (see the description of the
+<FONT SIZE=-1><B>declare</B>
+
+</FONT>
+builtin below) or the
+<B>-o functrace</B> shell option has been enabled with
+the <B>set</B> builtin
+(in which case all functions inherit the <B>DEBUG</B> and <B>RETURN</B> traps),
+and the
+<FONT SIZE=-1><B>ERR</B>
+
+</FONT>
+trap is not inherited unless the <B>-o errtrace</B> shell option has
+been enabled.
+<P>
+
+Variables local to the function may be declared with the
+<B>local</B>
+
+builtin command.  Ordinarily, variables and their values
+are shared between the function and its caller.
+If a variable is declared <B>local</B>, the variable's visible scope
+is restricted to that function and its children (including the functions
+it calls).
+Local variables &quot;shadow&quot; variables with the same name declared at
+previous scopes.
+For instance, a local variable declared in a function
+hides a global variable of the same name: references and assignments
+refer to the local variable, leaving the global variable unmodified.
+When the function returns, the global variable is once again visible.
+<P>
+
+The shell uses <I>dynamic scoping</I> to control a variable's visibility
+within functions.
+With dynamic scoping, visible variables and their values
+are a result of the sequence of function calls that caused execution
+to reach the current function.
+The value of a variable that a function sees depends
+on its value within its caller, if any, whether that caller is
+the &quot;global&quot; scope or another shell function.
+This is also the value that a local variable
+declaration &quot;shadows&quot;, and the value that is restored when the function
+returns.
+<P>
+
+For example, if a variable <I>var</I> is declared as local in function
+<I>func1</I>, and <I>func1</I> calls another function <I>func2</I>,
+references to <I>var</I> made from within <I>func2</I> will resolve to the
+local variable <I>var</I> from <I>func1</I>, shadowing any global variable
+named <I>var</I>.
+<P>
+
+The <B>unset</B> builtin also acts using the same dynamic scope: if a
+variable is local to the current scope, <B>unset</B> will unset it;
+otherwise the unset will refer to the variable found in any calling scope
+as described above.
+If a variable at the current local scope is unset, it will remain so
+until it is reset in that scope or until the function returns.
+Once the function returns, any instance of the variable at a previous
+scope will become visible.
+If the unset acts on a variable at a previous scope, any instance of a
+variable with that name that had been shadowed will become visible.
+<P>
+
+The <B>FUNCNEST</B> variable, if set to a numeric value greater
+than 0, defines a maximum function nesting level.  Function
+invocations that exceed the limit cause the entire command to
+abort.
+<P>
+
+If the builtin command
+<B>return</B>
+
+is executed in a function, the function completes and
+execution resumes with the next command after the function
+call.
+Any command associated with the <B>RETURN</B> trap is executed
+before execution resumes.
+When a function completes, the values of the
+positional parameters and the special parameter
+<B>#</B>
+
+are restored to the values they had prior to the function's
+execution.
+<P>
+
+Function names and definitions may be listed with the
+<B>-f</B>
+
+option to the
+<B>declare</B>
+
+or
+<B>typeset</B>
+
+builtin commands.  The
+<B>-F</B>
+
+option to
+<B>declare</B>
+
+or
+<B>typeset</B>
+
+will list the function names only
+(and optionally the source file and line number, if the <B>extdebug</B>
+shell option is enabled).
+Functions may be exported so that subshells
+automatically have them defined with the
+<B>-f</B>
+
+option to the
+<B>export</B>
+
+builtin.
+A function definition may be deleted using the <B>-f</B> option to
+the
+<B>unset</B>
+
+builtin.
+<P>
+
+Functions may be recursive.
+The <B>FUNCNEST</B> variable may be used to limit the depth of the
+function call stack and restrict the number of function invocations.
+By default, no limit is imposed on the number of recursive calls.
+<A NAME="lbBV">&nbsp;</A>
+<H3>ARITHMETIC EVALUATION</H3>
+
+The shell allows arithmetic expressions to be evaluated, under
+certain circumstances (see the <B>let</B> and <B>declare</B> builtin
+commands, the <B>((</B> compound command, and <B>Arithmetic Expansion</B>).
+Evaluation is done in fixed-width integers with no check for overflow,
+though division by 0 is trapped and flagged as an error.
+The operators and their precedence, associativity, and values
+are the same as in the C language.
+The following list of operators is grouped into levels of
+equal-precedence operators.
+The levels are listed in order of decreasing precedence.
+<P>
+
+
+<DL COMPACT>
+<DT><B></B><I>id</I>++ <I>id</I>--
+
+<DD>
+variable post-increment and post-decrement
+<DT><B>- +</B>
+
+<DD>
+unary minus and plus
+<DT><B>++</B><I>id</I> --<I>id</I>
+
+<DD>
+variable pre-increment and pre-decrement
+<DT><B>! ~</B>
+
+<DD>
+logical and bitwise negation
+<DT><B>**</B>
+
+<DD>
+exponentiation
+<DT><B>* / %</B>
+
+<DD>
+multiplication, division, remainder
+<DT><B>+ -</B>
+
+<DD>
+addition, subtraction
+<DT><B>&lt;&lt; &gt;&gt;</B>
+
+<DD>
+left and right bitwise shifts
+<DT><B>&lt;= &gt;= &lt; &gt;</B>
+
+<DD>
+comparison
+<DT><B>== !=</B>
+
+<DD>
+equality and inequality
+<DT><B>&amp;</B>
+
+<DD>
+bitwise AND
+<DT><B>^</B>
+
+<DD>
+bitwise exclusive OR
+<DT><B>|</B>
+
+<DD>
+bitwise OR
+<DT><B>&amp;&amp;</B>
+
+<DD>
+logical AND
+<DT><B>||</B>
+
+<DD>
+logical OR
+<DT><B></B><I>expr</I>?<I>expr</I>:<I>expr</I>
+
+<DD>
+conditional operator
+<DT><B>= *= /= %= += -= &lt;&lt;= &gt;&gt;= &amp;= ^= |=</B>
+
+<DD>
+assignment
+<DT><B></B><I>expr1</I> , <I>expr2</I>
+
+<DD>
+comma
+
+</DL>
+<P>
+
+Shell variables are allowed as operands; parameter expansion is
+performed before the expression is evaluated.
+Within an expression, shell variables may also be referenced by name
+without using the parameter expansion syntax.
+A shell variable that is null or unset evaluates to 0 when referenced
+by name without using the parameter expansion syntax.
+The value of a variable is evaluated as an arithmetic expression
+when it is referenced, or when a variable which has been given the
+<I>integer</I> attribute using <B>declare -i</B> is assigned a value.
+A null value evaluates to 0.
+A shell variable need not have its <I>integer</I> attribute
+turned on to be used in an expression.
+<P>
+
+Integer constants follow the C language definition, without suffixes or
+character constants.
+Constants with a leading 0 are interpreted as octal numbers.
+A leading 0x or 0X denotes hexadecimal.
+Otherwise, numbers take the form [<I>base#</I>]n, where the optional <I>base</I>
+is a decimal number between 2 and 64 representing the arithmetic
+base, and <I>n</I> is a number in that base.
+If <I>base#</I> is omitted, then base 10 is used.
+When specifying <I>n</I>,
+if a non-digit is required,
+the digits greater than 9 are represented by the lowercase letters,
+the uppercase letters, @, and _, in that order.
+If <I>base</I> is less than or equal to 36, lowercase and uppercase
+letters may be used interchangeably to represent numbers between 10
+and 35.
+<P>
+
+Operators are evaluated in order of precedence.  Sub-expressions in
+parentheses are evaluated first and may override the precedence
+rules above.
+<A NAME="lbBW">&nbsp;</A>
+<H3>CONDITIONAL EXPRESSIONS</H3>
+
+Conditional expressions are used by the <B>[[</B> compound command and
+the <B>test</B> and <B>[</B> builtin commands to test file attributes
+and perform string and arithmetic comparisons.
+The <B>test</B> and <B>[</B> commands determine their behavior based on
+the number of arguments; see the descriptions of those commands for any
+other command-specific actions.
+<P>
+
+Expressions are formed from the following unary or binary primaries.
+<B>Bash</B> handles several filenames specially when they are used in
+expressions.
+If the operating system on which <B>bash</B> is running provides these
+special files, bash will use them; otherwise it will emulate them
+internally with this behavior:
+If any <I>file</I> argument to one of the primaries is of the form
+<I>/dev/fd/n</I>, then file descriptor <I>n</I> is checked.
+If the <I>file</I> argument to one of the primaries is one of
+<I>/dev/stdin</I>, <I>/dev/stdout</I>, or <I>/dev/stderr</I>, file
+descriptor 0, 1, or 2, respectively, is checked.
+<P>
+
+Unless otherwise specified, primaries that operate on files follow symbolic
+links and operate on the target of the link, rather than the link itself.
+<P>
+
+
+When used with <B>[[</B>, the <B>&lt;</B> and <B>&gt;</B> operators sort
+lexicographically using the current locale.
+The <B>test</B> command sorts using ASCII ordering.
+<P>
+
+<DL COMPACT>
+<DT><B>-a </B><I>file</I>
+
+<DD>
+True if <I>file</I> exists.
+<DT><B>-b </B><I>file</I>
+
+<DD>
+True if <I>file</I> exists and is a block special file.
+<DT><B>-c </B><I>file</I>
+
+<DD>
+True if <I>file</I> exists and is a character special file.
+<DT><B>-d </B><I>file</I>
+
+<DD>
+True if <I>file</I> exists and is a directory.
+<DT><B>-e </B><I>file</I>
+
+<DD>
+True if <I>file</I> exists.
+<DT><B>-f </B><I>file</I>
+
+<DD>
+True if <I>file</I> exists and is a regular file.
+<DT><B>-g </B><I>file</I>
+
+<DD>
+True if <I>file</I> exists and is set-group-id.
+<DT><B>-h </B><I>file</I>
+
+<DD>
+True if <I>file</I> exists and is a symbolic link.
+<DT><B>-k </B><I>file</I>
+
+<DD>
+True if <I>file</I> exists and its ``sticky'' bit is set.
+<DT><B>-p </B><I>file</I>
+
+<DD>
+True if <I>file</I> exists and is a named pipe (FIFO).
+<DT><B>-r </B><I>file</I>
+
+<DD>
+True if <I>file</I> exists and is readable.
+<DT><B>-s </B><I>file</I>
+
+<DD>
+True if <I>file</I> exists and has a size greater than zero.
+<DT><B>-t </B><I>fd</I>
+
+<DD>
+True if file descriptor
+<I>fd</I>
+
+is open and refers to a terminal.
+<DT><B>-u </B><I>file</I>
+
+<DD>
+True if <I>file</I> exists and its set-user-id bit is set.
+<DT><B>-w </B><I>file</I>
+
+<DD>
+True if <I>file</I> exists and is writable.
+<DT><B>-x </B><I>file</I>
+
+<DD>
+True if <I>file</I> exists and is executable.
+<DT><B>-G </B><I>file</I>
+
+<DD>
+True if <I>file</I> exists and is owned by the effective group id.
+<DT><B>-L </B><I>file</I>
+
+<DD>
+True if <I>file</I> exists and is a symbolic link.
+<DT><B>-N </B><I>file</I>
+
+<DD>
+True if <I>file</I> exists and has been modified since it was last read.
+<DT><B>-O </B><I>file</I>
+
+<DD>
+True if <I>file</I> exists and is owned by the effective user id.
+<DT><B>-S </B><I>file</I>
+
+<DD>
+True if <I>file</I> exists and is a socket.
+<DT><I>file1</I> <B>-ef</B> <I>file2</I><DD>
+True if <I>file1</I> and <I>file2</I> refer to the same device and
+inode numbers.
+<DT><I>file1</I> -<B>nt</B> <I>file2</I><DD>
+True if <I>file1</I> is newer (according to modification date) than <I>file2</I>,
+or if <I>file1</I> exists and file2 does not.
+<DT><I>file1</I> -<B>ot</B> <I>file2</I><DD>
+True if <I>file1</I> is older than <I>file2</I>, or if <I>file2</I> exists
+and <I>file1</I> does not.
+<DT><B>-o </B><I>optname</I>
+
+<DD>
+True if the shell option
+<I>optname</I>
+
+is enabled.
+See the list of options under the description of the
+<B>-o</B>
+
+option to the
+<B>set</B>
+
+builtin below.
+<DT><B>-v </B><I>varname</I>
+
+<DD>
+True if the shell variable
+<I>varname</I>
+
+is set (has been assigned a value).
+<DT><B>-R </B><I>varname</I>
+
+<DD>
+True if the shell variable
+<I>varname</I>
+
+is set and is a name reference.
+<DT><B>-z </B><I>string</I>
+
+<DD>
+True if the length of <I>string</I> is zero.
+<DT><I>string</I><DD>
+
+<DT><B>-n </B><I>string</I>
+
+<DD>
+
+True if the length of
+<I>string</I>
+
+is non-zero.
+<DT><I>string1</I> <B>==</B> <I>string2</I><DD>
+
+<DT><I>string1</I> <B>=</B> <I>string2</I><DD>
+
+True if the strings are equal.  <B>=</B> should be used
+with the <B>test</B> command for POSIX conformance.
+When used with the <B>[[</B> command, this performs pattern matching as
+described above (<B>Compound Commands</B>).
+<DT><I>string1</I> <B>!=</B> <I>string2</I><DD>
+True if the strings are not equal.
+<DT><I>string1</I> <B>&lt;</B> <I>string2</I><DD>
+True if <I>string1</I> sorts before <I>string2</I> lexicographically.
+<DT><I>string1</I> <B>&gt;</B> <I>string2</I><DD>
+True if <I>string1</I> sorts after <I>string2</I> lexicographically.
+<DT><I>arg1</I> <B>OP</B> <I>arg2</I>
+
+<DD>
+<FONT SIZE=-1><B>OP</B>
+
+</FONT>
+is one of
+<B>-eq</B>,
+
+<B>-ne</B>,
+
+<B>-lt</B>,
+
+<B>-le</B>,
+
+<B>-gt</B>,
+
+or
+<B>-ge</B>.
+
+These arithmetic binary operators return true if <I>arg1</I>
+is equal to, not equal to, less than, less than or equal to,
+greater than, or greater than or equal to <I>arg2</I>, respectively.
+<I>Arg1</I>
+
+and
+<I>arg2</I>
+
+may be positive or negative integers.
+When used with the <B>[[</B> command,
+<I>Arg1</I>
+
+and
+<I>Arg2</I>
+
+are evaluated as arithmetic expressions (see
+<FONT SIZE=-1><B>ARITHMETIC EVALUATION</B>
+
+</FONT>
+above).
+
+</DL>
+<A NAME="lbBX">&nbsp;</A>
+<H3>SIMPLE COMMAND EXPANSION</H3>
+
+When a simple command is executed, the shell performs the following
+expansions, assignments, and redirections, from left to right, in
+the following order.
+<DL COMPACT>
+<DT>1.<DD>
+The words that the parser has marked as variable assignments (those
+preceding the command name) and redirections are saved for later
+processing.
+<DT>2.<DD>
+The words that are not variable assignments or redirections are
+expanded.  If any words remain after expansion, the first word
+is taken to be the name of the command and the remaining words are
+the arguments.
+<DT>3.<DD>
+Redirections are performed as described above under
+<FONT SIZE=-1><B>REDIRECTION</B>.
+
+</FONT>
+<DT>4.<DD>
+The text after the <B>=</B> in each variable assignment undergoes tilde
+expansion, parameter expansion, command substitution, arithmetic expansion,
+and quote removal before being assigned to the variable.
+</DL>
+<P>
+
+If no command name results, the variable assignments affect the current
+shell environment.  Otherwise, the variables are added to the environment
+of the executed command and do not affect the current shell environment.
+If any of the assignments attempts to assign a value to a readonly variable,
+an error occurs, and the command exits with a non-zero status.
+<P>
+
+If no command name results, redirections are performed, but do not
+affect the current shell environment.  A redirection error causes the
+command to exit with a non-zero status.
+<P>
+
+If there is a command name left after expansion, execution proceeds as
+described below.  Otherwise, the command exits.  If one of the expansions
+contained a command substitution, the exit status of the command is
+the exit status of the last command substitution performed.  If there
+were no command substitutions, the command exits with a status of zero.
+<A NAME="lbBY">&nbsp;</A>
+<H3>COMMAND EXECUTION</H3>
+
+After a command has been split into words, if it results in a
+simple command and an optional list of arguments, the following
+actions are taken.
+<P>
+
+If the command name contains no slashes, the shell attempts to
+locate it.  If there exists a shell function by that name, that
+function is invoked as described above in
+<FONT SIZE=-1><B>FUNCTIONS</B>.
+
+</FONT>
+If the name does not match a function, the shell searches for
+it in the list of shell builtins.  If a match is found, that
+builtin is invoked.
+<P>
+
+If the name is neither a shell function nor a builtin,
+and contains no slashes,
+<B>bash</B>
+
+searches each element of the
+<FONT SIZE=-1><B>PATH</B>
+
+</FONT>
+for a directory containing an executable file by that name.
+<B>Bash</B>
+
+uses a hash table to remember the full pathnames of executable
+files (see
+<B>hash</B>
+
+under
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>
+
+</FONT>
+below).
+A full search of the directories in
+<FONT SIZE=-1><B>PATH</B>
+
+</FONT>
+is performed only if the command is not found in the hash table.
+If the search is unsuccessful, the shell searches for a defined shell
+function named <B>command_not_found_handle</B>.
+If that function exists, it is invoked in a separate execution environment
+with the original command and
+the original command's arguments as its arguments, and the function's
+exit status becomes the exit status of that subshell.
+If that function is not defined, the shell prints an error
+message and returns an exit status of 127.
+<P>
+
+If the search is successful, or if the command name contains
+one or more slashes, the shell executes the named program in a
+separate execution environment.
+Argument 0 is set to the name given, and the remaining arguments
+to the command are set to the arguments given, if any.
+<P>
+
+If this execution fails because the file is not in executable
+format, and the file is not a directory, it is assumed to be
+a <I>shell script</I>, a file
+containing shell commands.  A subshell is spawned to execute
+it.  This subshell reinitializes itself, so
+that the effect is as if a new shell had been invoked
+to handle the script, with the exception that the locations of
+commands remembered by the parent (see
+<B>hash</B>
+
+below under
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>)</FONT>
+are retained by the child.
+<P>
+
+If the program is a file beginning with
+<B>#!</B>,
+
+the remainder of the first line specifies an interpreter
+for the program.  The shell executes the
+specified interpreter on operating systems that do not
+handle this executable format themselves.  The arguments to the
+interpreter consist of a single optional argument following the
+interpreter name on the first line of the program, followed
+by the name of the program, followed by the command
+arguments, if any.
+<A NAME="lbBZ">&nbsp;</A>
+<H3>COMMAND EXECUTION ENVIRONMENT</H3>
+
+The shell has an <I>execution environment</I>, which consists of the
+following:
+<DL COMPACT>
+<DT>*<DD>
+open files inherited by the shell at invocation, as modified by
+redirections supplied to the <B>exec</B> builtin
+<DT>*<DD>
+the current working directory as set by <B>cd</B>, <B>pushd</B>, or
+<B>popd</B>, or inherited by the shell at invocation
+<DT>*<DD>
+the file creation mode mask as set by <B>umask</B> or inherited from
+the shell's parent
+<DT>*<DD>
+current traps set by <B>trap</B>
+<DT>*<DD>
+shell parameters that are set by variable assignment or with <B>set</B>
+or inherited from the shell's parent in the environment
+<DT>*<DD>
+shell functions defined during execution or inherited from the shell's
+parent in the environment
+<DT>*<DD>
+options enabled at invocation (either by default or with command-line
+arguments) or by <B>set</B>
+<DT>*<DD>
+options enabled by <B>shopt</B>
+<DT>*<DD>
+shell aliases defined with <B>alias</B>
+<DT>*<DD>
+various process IDs, including those of background jobs, the value
+of <B>$$</B>, and the value of
+<FONT SIZE=-1><B>PPID</B>
+
+</FONT>
+</DL>
+<P>
+
+When a simple command other than a builtin or shell function
+is to be executed, it
+is invoked in a separate execution environment that consists of
+the following.  Unless otherwise noted, the values are inherited
+from the shell.
+
+<DL COMPACT>
+<DT>*<DD>
+the shell's open files, plus any modifications and additions specified
+by redirections to the command
+<DT>*<DD>
+the current working directory
+<DT>*<DD>
+the file creation mode mask
+<DT>*<DD>
+shell variables and functions marked for export, along with variables
+exported for the command, passed in the environment
+<DT>*<DD>
+traps caught by the shell are reset to the values inherited from the
+shell's parent, and traps ignored by the shell are ignored
+</DL>
+<P>
+
+A command invoked in this separate environment cannot affect the
+shell's execution environment.
+<P>
+
+Command substitution, commands grouped with parentheses,
+and asynchronous commands are invoked in a
+subshell environment that is a duplicate of the shell environment,
+except that traps caught by the shell are reset to the values
+that the shell inherited from its parent at invocation.  Builtin
+commands that are invoked as part of a pipeline are also executed in a
+subshell environment.  Changes made to the subshell environment
+cannot affect the shell's execution environment.
+<P>
+
+Subshells spawned to execute command substitutions inherit the value of
+the <B>-e</B> option from the parent shell.  When not in <I>posix mode</I>,
+<B>bash</B> clears the <B>-e</B> option in such subshells.
+<P>
+
+If a command is followed by a <B>&amp;</B> and job control is not active, the
+default standard input for the command is the empty file <I>/dev/null</I>.
+Otherwise, the invoked command inherits the file descriptors of the calling
+shell as modified by redirections.
+<A NAME="lbCA">&nbsp;</A>
+<H3>ENVIRONMENT</H3>
+
+When a program is invoked it is given an array of strings
+called the
+<I>environment</I>.
+
+This is a list of
+<I>name</I>-<I>value</I> pairs, of the form
+<I>name</I>=value.
+
+<P>
+
+The shell provides several ways to manipulate the environment.
+On invocation, the shell scans its own environment and
+creates a parameter for each name found, automatically marking
+it for
+<I>export</I>
+
+to child processes.  Executed commands inherit the environment.
+The
+<B>export</B>
+
+and
+<B>declare -x</B>
+
+commands allow parameters and functions to be added to and
+deleted from the environment.  If the value of a parameter
+in the environment is modified, the new value becomes part
+of the environment, replacing the old.  The environment
+inherited by any executed command consists of the shell's
+initial environment, whose values may be modified in the shell,
+less any pairs removed by the
+<B>unset</B>
+
+command, plus any additions via the
+<B>export</B>
+
+and
+<B>declare -x</B>
+
+commands.
+<P>
+
+The environment for any
+<I>simple command</I>
+
+or function may be augmented temporarily by prefixing it with
+parameter assignments, as described above in
+<FONT SIZE=-1><B>PARAMETERS</B>.
+
+</FONT>
+These assignment statements affect only the environment seen
+by that command.
+<P>
+
+If the
+<B>-k</B>
+
+option is set (see the
+<B>set</B>
+
+builtin command below), then
+<I>all</I>
+
+parameter assignments are placed in the environment for a command,
+not just those that precede the command name.
+<P>
+
+When
+<B>bash</B>
+
+invokes an external command, the variable
+<B>_</B>
+
+is set to the full filename of the command and passed to that
+command in its environment.
+<A NAME="lbCB">&nbsp;</A>
+<H3>EXIT STATUS</H3>
+
+The exit status of an executed command is the value returned by the
+<I>waitpid</I> system call or equivalent function.  Exit statuses
+fall between 0 and 255, though, as explained below, the shell may
+use values above 125 specially.  Exit statuses from shell builtins and
+compound commands are also limited to this range.  Under certain
+circumstances, the shell will use special values to indicate specific
+failure modes.
+<P>
+
+For the shell's purposes, a command which exits with a
+zero exit status has succeeded.  An exit status of zero
+indicates success.  A non-zero exit status indicates failure.
+When a command terminates on a fatal signal <I>N</I>, <B>bash</B> uses
+the value of 128+<I>N</I> as the exit status.
+<P>
+
+If a command is not found, the child process created to
+execute it returns a status of 127.  If a command is found
+but is not executable, the return status is 126.
+<P>
+
+If a command fails because of an error during expansion or redirection,
+the exit status is greater than zero.
+<P>
+
+Shell builtin commands return a status of 0 (<I>true</I>) if
+successful, and non-zero (<I>false</I>) if an error occurs
+while they execute.
+All builtins return an exit status of 2 to indicate incorrect usage,
+generally invalid options or missing arguments.
+<P>
+
+<B>Bash</B> itself returns the exit status of the last command
+executed, unless a syntax error occurs, in which case it exits
+with a non-zero value.  See also the <B>exit</B> builtin
+command below.
+<A NAME="lbCC">&nbsp;</A>
+<H3>SIGNALS</H3>
+
+When <B>bash</B> is interactive, in the absence of any traps, it ignores
+<FONT SIZE=-1><B>SIGTERM</B>
+
+</FONT>
+(so that <B>kill 0</B> does not kill an interactive shell),
+and
+<FONT SIZE=-1><B>SIGINT</B>
+
+</FONT>
+is caught and handled (so that the <B>wait</B> builtin is interruptible).
+In all cases, <B>bash</B> ignores
+<FONT SIZE=-1><B>SIGQUIT</B>.
+
+</FONT>
+If job control is in effect,
+<B>bash</B>
+
+ignores
+<FONT SIZE=-1><B>SIGTTIN</B>,
+
+</FONT>
+<FONT SIZE=-1><B>SIGTTOU</B>,
+
+</FONT>
+and
+<FONT SIZE=-1><B>SIGTSTP</B>.
+
+</FONT>
+<P>
+
+Non-builtin commands run by <B>bash</B> have signal handlers
+set to the values inherited by the shell from its parent.
+When job control is not in effect, asynchronous commands
+ignore
+<FONT SIZE=-1><B>SIGINT</B>
+
+</FONT>
+and
+<FONT SIZE=-1><B>SIGQUIT</B>
+
+</FONT>
+in addition to these inherited handlers.
+Commands run as a result of command substitution ignore the
+keyboard-generated job control signals
+<FONT SIZE=-1><B>SIGTTIN</B>,
+
+</FONT>
+<FONT SIZE=-1><B>SIGTTOU</B>,
+
+</FONT>
+and
+<FONT SIZE=-1><B>SIGTSTP</B>.
+
+</FONT>
+<P>
+
+The shell exits by default upon receipt of a
+<FONT SIZE=-1><B>SIGHUP</B>.
+
+</FONT>
+Before exiting, an interactive shell resends the
+<FONT SIZE=-1><B>SIGHUP</B>
+
+</FONT>
+to all jobs, running or stopped.
+Stopped jobs are sent
+<FONT SIZE=-1><B>SIGCONT</B>
+
+</FONT>
+to ensure that they receive the
+<FONT SIZE=-1><B>SIGHUP</B>.
+
+</FONT>
+To prevent the shell from
+sending the signal to a particular job, it should be removed from the
+jobs table with the
+<B>disown</B>
+
+builtin (see
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>
+
+</FONT>
+below) or marked
+to not receive
+<FONT SIZE=-1><B>SIGHUP</B>
+
+</FONT>
+using
+<B>disown -h</B>.
+
+<P>
+
+If the
+<B>huponexit</B>
+
+shell option has been set with
+<B>shopt</B>,
+
+<B>bash</B>
+
+sends a
+<FONT SIZE=-1><B>SIGHUP</B>
+
+</FONT>
+to all jobs when an interactive login shell exits.
+<P>
+
+If <B>bash</B> is waiting for a command to complete and receives a signal
+for which a trap has been set, the trap will not be executed until
+the command completes.
+When <B>bash</B> is waiting for an asynchronous command via the <B>wait</B>
+builtin, the reception of a signal for which a trap has been set will
+cause the <B>wait</B> builtin to return immediately with an exit status
+greater than 128, immediately after which the trap is executed.
+<A NAME="lbCD">&nbsp;</A>
+<H3>JOB CONTROL</H3>
+
+<I>Job control</I>
+
+refers to the ability to selectively stop (<I>suspend</I>)
+the execution of processes and continue (<I>resume</I>)
+their execution at a later point.  A user typically employs
+this facility via an interactive interface supplied jointly
+by the operating system kernel's terminal driver and
+<B>bash</B>.
+
+<P>
+
+The shell associates a
+<I>job</I>
+
+with each pipeline.  It keeps a table of currently executing
+jobs, which may be listed with the
+<B>jobs</B>
+
+command.  When
+<B>bash</B>
+
+starts a job asynchronously (in the
+<I>background</I>),
+
+it prints a line that looks like:
+<DL COMPACT><DT><DD>
+<P>
+
+[1] 25647
+</DL>
+
+<P>
+
+indicating that this job is job number 1 and that the process ID
+of the last process in the pipeline associated with this job is 25647.
+All of the processes in a single pipeline are members of the same job.
+<B>Bash</B>
+
+uses the
+<I>job</I>
+
+abstraction as the basis for job control.
+<P>
+
+To facilitate the implementation of the user interface to job
+control, the operating system maintains the notion of a <I>current terminal
+process group ID</I>.  Members of this process group (processes whose
+process group ID is equal to the current terminal process group ID)
+receive keyboard-generated signals such as
+<FONT SIZE=-1><B>SIGINT</B>.
+
+</FONT>
+These processes are said to be in the
+<I>foreground</I>.
+
+<I>Background</I>
+
+processes are those whose process group ID differs from the terminal's;
+such processes are immune to keyboard-generated signals.
+Only foreground processes are allowed to read from or, if the
+user so specifies with <TT>stty tostop</TT>, write to the
+terminal.
+Background processes which attempt to read from (write to when
+<TT>stty tostop</TT> is in effect) the
+terminal are sent a
+<FONT SIZE=-1><B>SIGTTIN (SIGTTOU)</B>
+
+</FONT>
+signal by the kernel's terminal driver,
+which, unless caught, suspends the process.
+<P>
+
+If the operating system on which
+<B>bash</B>
+
+is running supports
+job control,
+<B>bash</B>
+
+contains facilities to use it.
+Typing the
+<I>suspend</I>
+
+character (typically
+<B>^Z</B>,
+
+Control-Z) while a process is running
+causes that process to be stopped and returns control to
+<B>bash</B>.
+
+Typing the
+<I>delayed suspend</I>
+
+character (typically
+<B>^Y</B>,
+
+Control-Y) causes the process to be stopped when it
+attempts to read input from the terminal, and control to
+be returned to
+<B>bash</B>.
+
+The user may then manipulate the state of this job, using the
+<B>bg</B>
+
+command to continue it in the background, the
+<B>fg</B>
+
+command to continue it in the foreground, or
+the
+<B>kill</B>
+
+command to kill it.  A <B>^Z</B> takes effect immediately,
+and has the additional side effect of causing pending output
+and typeahead to be discarded.
+<P>
+
+There are a number of ways to refer to a job in the shell.
+The character
+<B>%</B>
+
+introduces a job specification (<I>jobspec</I>).  Job number
+<I>n</I>
+
+may be referred to as
+<B>%n</B>.
+
+A job may also be referred to using a prefix of the name used to
+start it, or using a substring that appears in its command line.
+For example,
+<B>%ce</B>
+
+refers to a stopped
+job whose command name begins with
+<B>ce</B>.
+
+If a prefix matches more than one job,
+<B>bash</B>
+
+reports an error.  Using
+<B>%?ce</B>,
+
+on the other hand, refers to any job containing the string
+<B>ce</B>
+
+in its command line.  If the substring matches more than one job,
+<B>bash</B>
+
+reports an error.  The symbols
+<B>%%</B>
+
+and
+<B>%+</B>
+
+refer to the shell's notion of the
+<I>current job</I>,
+
+which is the last job stopped while it was in
+the foreground or started in the background.
+The
+<I>previous job</I>
+
+may be referenced using
+<B>%-</B>.
+
+If there is only a single job, <B>%+</B> and <B>%-</B> can both be used
+to refer to that job.
+In output pertaining to jobs (e.g., the output of the
+<B>jobs</B>
+
+command), the current job is always flagged with a
+<B>+</B>,
+
+and the previous job with a
+<B>-</B>.
+
+A single % (with no accompanying job specification) also refers to the
+current job.
+<P>
+
+Simply naming a job can be used to bring it into the
+foreground:
+<B>%1</B>
+
+is a synonym for
+<B>``fg %1''</B>,
+bringing job 1 from the background into the foreground.
+Similarly,
+<B>``%1 &amp;''</B>
+
+resumes job 1 in the background, equivalent to
+<B>``bg %1''</B>.
+<P>
+
+The shell learns immediately whenever a job changes state.
+Normally,
+<B>bash</B>
+
+waits until it is about to print a prompt before reporting
+changes in a job's status so as to not interrupt
+any other output.  If the
+<B>-b</B>
+
+option to the
+<B>set</B>
+
+builtin command
+is enabled,
+<B>bash</B>
+
+reports such changes immediately.
+Any trap on
+<FONT SIZE=-1><B>SIGCHLD</B>
+
+</FONT>
+is executed for each child that exits.
+<P>
+
+If an attempt to exit
+<B>bash</B>
+
+is made while jobs are stopped (or, if the <B>checkjobs</B> shell option has
+been enabled using the <B>shopt</B> builtin, running), the shell prints a
+warning message, and, if the <B>checkjobs</B> option is enabled, lists the
+jobs and their statuses.
+The
+<B>jobs</B>
+
+command may then be used to inspect their status.
+If a second attempt to exit is made without an intervening command,
+the shell does not print another warning, and any stopped
+jobs are terminated.
+<P>
+
+When the shell is waiting for a job or process using the <B>wait</B>
+builtin, and job control is enabled, <B>wait</B> will return when the
+job changes state. The <B>-f</B> option causes <B>wait</B> to wait
+until the job or process terminates before returning.
+<A NAME="lbCE">&nbsp;</A>
+<H3>PROMPTING</H3>
+
+When executing interactively,
+<B>bash</B>
+
+displays the primary prompt
+<FONT SIZE=-1><B>PS1</B>
+
+</FONT>
+when it is ready to read a command, and the secondary prompt
+<FONT SIZE=-1><B>PS2</B>
+
+</FONT>
+when it needs more input to complete a command.
+<B>Bash</B>
+
+displays
+<FONT SIZE=-1><B>PS0</B>
+
+</FONT>
+after it reads a command but before executing it.
+<B>Bash</B>
+
+displays
+<FONT SIZE=-1><B>PS4</B>
+
+</FONT>
+as described above
+before tracing each command when the <B>-x</B> option is enabled.
+<B>Bash</B>
+
+allows these prompt strings to be customized by inserting a number of
+backslash-escaped special characters that are decoded as follows:
+<DL COMPACT><DT><DD>
+
+<DL COMPACT>
+<DT><B>\a</B>
+
+<DD>
+an ASCII bell character (07)
+<DT><B>\d</B>
+
+<DD>
+the date in &quot;Weekday Month Date&quot; format (e.g., &quot;Tue May 26&quot;)
+<DT><B>\D{</B><I>format</I>}
+
+<DD>
+the <I>format</I> is passed to <I>strftime</I>(3) and the result is inserted
+into the prompt string; an empty <I>format</I> results in a locale-specific
+time representation.  The braces are required
+<DT><B>\e</B>
+
+<DD>
+an ASCII escape character (033)
+<DT><B>\h</B>
+
+<DD>
+the hostname up to the first `.'
+<DT><B>\H</B>
+
+<DD>
+the hostname
+<DT><B>\j</B>
+
+<DD>
+the number of jobs currently managed by the shell
+<DT><B>\l</B>
+
+<DD>
+the basename of the shell's terminal device name
+<DT><B>\n</B>
+
+<DD>
+newline
+<DT><B>\r</B>
+
+<DD>
+carriage return
+<DT><B>\s</B>
+
+<DD>
+the name of the shell, the basename of
+<B>$0</B>
+
+(the portion following the final slash)
+<DT><B>\t</B>
+
+<DD>
+the current time in 24-hour HH:MM:SS format
+<DT><B>\T</B>
+
+<DD>
+the current time in 12-hour HH:MM:SS format
+<DT><B>\@</B>
+
+<DD>
+the current time in 12-hour am/pm format
+<DT><B>\A</B>
+
+<DD>
+the current time in 24-hour HH:MM format
+<DT><B>\u</B>
+
+<DD>
+the username of the current user
+<DT><B>\v</B>
+
+<DD>
+the version of <B>bash</B> (e.g., 2.00)
+<DT><B>\V</B>
+
+<DD>
+the release of <B>bash</B>, version + patch level (e.g., 2.00.0)
+<DT><B>\w</B>
+
+<DD>
+the current working directory, with
+<FONT SIZE=-1><B>$HOME</B>
+
+</FONT>
+abbreviated with a tilde
+(uses the value of the
+<FONT SIZE=-1><B>PROMPT_DIRTRIM</B>
+
+</FONT>
+variable)
+<DT><B>\W</B>
+
+<DD>
+the basename of the current working directory, with
+<FONT SIZE=-1><B>$HOME</B>
+
+</FONT>
+abbreviated with a tilde
+<DT><B>\!</B>
+
+<DD>
+the history number of this command
+<DT><B>\#</B>
+
+<DD>
+the command number of this command
+<DT><B>\$</B>
+
+<DD>
+if the effective UID is 0, a
+<B>#</B>,
+
+otherwise a
+<B>$</B>
+
+<DT><B>\</B><I>nnn</I>
+
+<DD>
+the character corresponding to the octal number <I>nnn</I>
+<DT><B>\\</B>
+
+<DD>
+a backslash
+<DT><B>\[</B>
+
+<DD>
+begin a sequence of non-printing characters, which could be used to
+embed a terminal control sequence into the prompt
+<DT><B>\]</B>
+
+<DD>
+end a sequence of non-printing characters
+
+</DL></DL>
+
+<P>
+
+The command number and the history number are usually different:
+the history number of a command is its position in the history
+list, which may include commands restored from the history file
+(see
+<FONT SIZE=-1><B>HISTORY</B>
+
+</FONT>
+below), while the command number is the position in the sequence
+of commands executed during the current shell session.
+After the string is decoded, it is expanded via
+parameter expansion, command substitution, arithmetic
+expansion, and quote removal, subject to the value of the
+<B>promptvars</B>
+
+shell option (see the description of the
+<B>shopt</B>
+
+command under
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>
+
+</FONT>
+below).
+This can have unwanted side effects if escaped portions of the string
+appear within command substitution or contain characters special to
+word expansion.
+<A NAME="lbCF">&nbsp;</A>
+<H3>READLINE</H3>
+
+This is the library that handles reading input when using an interactive
+shell, unless the
+<B>--noediting</B>
+
+option is given at shell invocation.
+Line editing is also used when using the <B>-e</B> option to the
+<B>read</B> builtin.
+By default, the line editing commands are similar to those of Emacs.
+A vi-style line editing interface is also available.
+Line editing can be enabled at any time using the
+<B>-o emacs</B>
+
+or
+<B>-o vi</B>
+
+options to the
+<B>set</B>
+
+builtin (see
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>
+
+</FONT>
+below).
+To turn off line editing after the shell is running, use the
+<B>+o emacs</B>
+
+or
+<B>+o vi</B>
+
+options to the
+<B>set</B>
+
+builtin.
+<A NAME="lbCG">&nbsp;</A>
+<H4>Readline Notation</H4>
+
+In this section, the Emacs-style notation is used to denote
+keystrokes.  Control keys are denoted by C-<I>key</I>, e.g., C-n
+means Control-N.  Similarly,
+<I>meta</I>
+
+keys are denoted by M-<I>key</I>, so M-x means Meta-X.  (On keyboards
+without a
+<I>meta</I>
+
+key, M-<I>x</I> means ESC <I>x</I>, i.e., press the Escape key
+then the
+<I>x</I>
+
+key.  This makes ESC the <I>meta prefix</I>.
+The combination M-C-<I>x</I> means ESC-Control-<I>x</I>,
+or press the Escape key
+then hold the Control key while pressing the
+<I>x</I>
+
+key.)
+<P>
+
+Readline commands may be given numeric
+<I>arguments</I>,
+
+which normally act as a repeat count.
+Sometimes, however, it is the sign of the argument that is significant.
+Passing a negative argument to a command that acts in the forward
+direction (e.g., <B>kill-line</B>) causes that command to act in a
+backward direction.
+Commands whose behavior with arguments deviates from this are noted
+below.
+<P>
+
+When a command is described as <I>killing</I> text, the text
+deleted is saved for possible future retrieval
+(<I>yanking</I>).  The killed text is saved in a
+<I>kill ring</I>.  Consecutive kills cause the text to be
+accumulated into one unit, which can be yanked all at once.
+Commands which do not kill text separate the chunks of text
+on the kill ring.
+<A NAME="lbCH">&nbsp;</A>
+<H4>Readline Initialization</H4>
+
+Readline is customized by putting commands in an initialization
+file (the <I>inputrc</I> file).
+The name of this file is taken from the value of the
+<FONT SIZE=-1><B>INPUTRC</B>
+
+</FONT>
+variable.  If that variable is unset, the default is
+<A HREF="file:~/.inputrc"><I>~/.inputrc</I></A>.
+
+If that file  does not exist or cannot be read, the ultimate default is
+<A HREF="file:/etc/inputrc"><I>/etc/inputrc</I></A>.
+
+When a program which uses the readline library starts up, the
+initialization file is read, and the key bindings and variables
+are set.
+There are only a few basic constructs allowed in the
+readline initialization file.
+Blank lines are ignored.
+Lines beginning with a <B>#</B> are comments.
+Lines beginning with a <B>$</B> indicate conditional constructs.
+Other lines denote key bindings and variable settings.
+<P>
+
+The default key-bindings may be changed with an
+<I>inputrc</I>
+
+file.
+Other programs that use this library may add their own commands
+and bindings.
+<P>
+
+For example, placing
+<DL COMPACT><DT><DD>
+<P>
+
+M-Control-u: universal-argument
+</DL>
+
+or
+<DL COMPACT><DT><DD>
+C-Meta-u: universal-argument
+</DL>
+
+into the
+<I>inputrc</I>
+
+would make M-C-u execute the readline command
+<I>universal-argument</I>.
+
+<P>
+
+The following symbolic character names are recognized:
+<I>RUBOUT</I>,
+
+<I>DEL</I>,
+
+<I>ESC</I>,
+
+<I>LFD</I>,
+
+<I>NEWLINE</I>,
+
+<I>RET</I>,
+
+<I>RETURN</I>,
+
+<I>SPC</I>,
+
+<I>SPACE</I>,
+
+and
+<I>TAB</I>.
+
+<P>
+
+In addition to command names, readline allows keys to be bound
+to a string that is inserted when the key is pressed (a <I>macro</I>).
+<A NAME="lbCI">&nbsp;</A>
+<H4>Readline Key Bindings</H4>
+
+The syntax for controlling key bindings in the
+<I>inputrc</I>
+
+file is simple.  All that is required is the name of the
+command or the text of a macro and a key sequence to which
+it should be bound.  The name may be specified in one of two ways:
+as a symbolic key name, possibly with <I>Meta-</I> or <I>Control-</I>
+prefixes, or as a key sequence.
+<P>
+
+When using the form <B>keyname</B>:<I>function-name</I> or <I>macro</I>,
+<I>keyname</I>
+
+is the name of a key spelled out in English.  For example:
+<P>
+<DL COMPACT><DT><DD>
+Control-u: universal-argument
+<BR>
+
+Meta-Rubout: backward-kill-word
+<BR>
+
+Control-o: &quot;&gt; output&quot;
+</DL>
+
+<P>
+
+In the above example,
+<I>C-u</I>
+
+is bound to the function
+<B>universal-argument</B>,
+
+<I>M-DEL</I>
+
+is bound to the function
+<B>backward-kill-word</B>,
+
+and
+<I>C-o</I>
+
+is bound to run the macro
+expressed on the right hand side (that is, to insert the text
+<TT>&gt; output</TT>
+
+into the line).
+<P>
+
+In the second form, <B>&quot;keyseq&quot;</B>:<I>function-name</I> or <I>macro</I>,
+<B>keyseq</B>
+
+differs from
+<B>keyname</B>
+
+above in that strings denoting
+an entire key sequence may be specified by placing the sequence
+within double quotes.  Some GNU Emacs style key escapes can be
+used, as in the following example, but the symbolic character names
+are not recognized.
+<P>
+<DL COMPACT><DT><DD>
+&quot;\C-u&quot;: universal-argument
+<BR>
+
+&quot;\C-x\C-r&quot;: re-read-init-file
+<BR>
+
+&quot;\e[11~&quot;: &quot;Function Key 1&quot;
+</DL>
+
+<P>
+
+In this example,
+<I>C-u</I>
+
+is again bound to the function
+<B>universal-argument</B>.
+
+<I>C-x C-r</I>
+
+is bound to the function
+<B>re-read-init-file</B>,
+
+and
+<I>ESC [ 1 1 ~</I>
+
+is bound to insert the text
+<TT>Function Key 1</TT>.
+
+<P>
+
+The full set of GNU Emacs style escape sequences is
+<DL COMPACT><DT><DD>
+
+<DL COMPACT>
+<DT><B>\C-</B>
+
+<DD>
+control prefix
+<DT><B>\M-</B>
+
+<DD>
+meta prefix
+<DT><B>\e</B>
+
+<DD>
+an escape character
+<DT><B>\\</B>
+
+<DD>
+backslash
+<DT><B>\</B>
+
+<DD>
+literal &quot;
+<DT><B>\aq</B>
+
+<DD>
+literal aq
+</DL></DL>
+
+
+<P>
+
+In addition to the GNU Emacs style escape sequences, a second
+set of backslash escapes is available:
+<DL COMPACT><DT><DD>
+
+<DL COMPACT>
+<DT><B>\a</B>
+
+<DD>
+alert (bell)
+<DT><B>\b</B>
+
+<DD>
+backspace
+<DT><B>\d</B>
+
+<DD>
+delete
+<DT><B>\f</B>
+
+<DD>
+form feed
+<DT><B>\n</B>
+
+<DD>
+newline
+<DT><B>\r</B>
+
+<DD>
+carriage return
+<DT><B>\t</B>
+
+<DD>
+horizontal tab
+<DT><B>\v</B>
+
+<DD>
+vertical tab
+<DT><B>\</B><I>nnn</I>
+
+<DD>
+the eight-bit character whose value is the octal value <I>nnn</I>
+(one to three digits)
+<DT><B>\x</B><I>HH</I>
+
+<DD>
+the eight-bit character whose value is the hexadecimal value <I>HH</I>
+(one or two hex digits)
+</DL></DL>
+
+
+<P>
+
+When entering the text of a macro, single or double quotes must
+be used to indicate a macro definition.
+Unquoted text is assumed to be a function name.
+In the macro body, the backslash escapes described above are expanded.
+Backslash will quote any other character in the macro text,
+including &quot; and aq.
+<P>
+
+<B>Bash</B>
+
+allows the current readline key bindings to be displayed or modified
+with the
+<B>bind</B>
+
+builtin command.  The editing mode may be switched during interactive
+use by using the
+<B>-o</B>
+
+option to the
+<B>set</B>
+
+builtin command (see
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>
+
+</FONT>
+below).
+<A NAME="lbCJ">&nbsp;</A>
+<H4>Readline Variables</H4>
+
+Readline has variables that can be used to further customize its
+behavior.  A variable may be set in the
+<I>inputrc</I>
+
+file with a statement of the form
+<DL COMPACT><DT><DD>
+<P>
+
+<B>set</B> <I>variable-name</I> <I>value</I>
+</DL>
+
+or using the <B>bind</B> builtin command (see
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>
+
+</FONT>
+below).
+<P>
+
+Except where noted, readline variables can take the values
+<B>On</B>
+
+or
+<B>Off</B>
+
+(without regard to case).
+Unrecognized variable names are ignored.
+When a variable value is read, empty or null values, &quot;on&quot; (case-insensitive),
+and &quot;1&quot; are equivalent to <B>On</B>.  All other values are equivalent to
+<B>Off</B>.
+The variables and their default values are:
+<P>
+
+
+<DL COMPACT>
+<DT><B>bell-style (audible)</B>
+
+<DD>
+Controls what happens when readline wants to ring the terminal bell.
+If set to <B>none</B>, readline never rings the bell.  If set to
+<B>visible</B>, readline uses a visible bell if one is available.
+If set to <B>audible</B>, readline attempts to ring the terminal's bell.
+<DT><B>bind-tty-special-chars (On)</B>
+
+<DD>
+If set to <B>On</B>, readline attempts to bind the control characters
+treated specially by the kernel's terminal driver to their readline
+equivalents.
+<DT><B>blink-matching-paren (Off)</B>
+
+<DD>
+If set to <B>On</B>, readline attempts to briefly move the cursor to an
+opening parenthesis when a closing parenthesis is inserted.
+<DT><B>colored-completion-prefix (Off)</B>
+
+<DD>
+If set to <B>On</B>, when listing completions, readline displays the
+common prefix of the set of possible completions using a different color.
+The color definitions are taken from the value of the <B>LS_COLORS</B>
+environment variable.
+<DT><B>colored-stats (Off)</B>
+
+<DD>
+If set to <B>On</B>, readline displays possible completions using different
+colors to indicate their file type.
+The color definitions are taken from the value of the <B>LS_COLORS</B>
+environment variable.
+<DT><B>comment-begin (``#'')</B>
+
+<DD>
+The string that is inserted when the readline
+<B>insert-comment</B>
+
+command is executed.
+This command is bound to
+<B>M-#</B>
+
+in emacs mode and to
+<B>#</B>
+
+in vi command mode.
+<DT><B>completion-display-width (-1)</B>
+
+<DD>
+The number of screen columns used to display possible matches
+when performing completion.
+The value is ignored if it is less than 0 or greater than the terminal
+screen width.
+A value of 0 will cause matches to be displayed one per line.
+The default value is -1.
+<DT><B>completion-ignore-case (Off)</B>
+
+<DD>
+If set to <B>On</B>, readline performs filename matching and completion
+in a case-insensitive fashion.
+<DT><B>completion-map-case (Off)</B>
+
+<DD>
+If set to <B>On</B>, and <B>completion-ignore-case</B> is enabled, readline
+treats hyphens (<I>-</I>) and underscores (<I>_</I>) as equivalent when
+performing case-insensitive filename matching and completion.
+<DT><B>completion-prefix-display-length (0)</B>
+
+<DD>
+The length in characters of the common prefix of a list of possible
+completions that is displayed without modification.  When set to a
+value greater than zero, common prefixes longer than this value are
+replaced with an ellipsis when displaying possible completions.
+<DT><B>completion-query-items (100)</B>
+
+<DD>
+This determines when the user is queried about viewing
+the number of possible completions
+generated by the <B>possible-completions</B> command.
+It may be set to any integer value greater than or equal to zero.
+If the number of possible completions is greater than
+or equal to the value of this variable,
+readline will ask whether or not the user wishes to view them;
+otherwise they are simply listed on the terminal.
+<DT><B>convert-meta (On)</B>
+
+<DD>
+If set to <B>On</B>, readline will convert characters with the
+eighth bit set to an ASCII key sequence
+by stripping the eighth bit and prefixing an
+escape character (in effect, using escape as the <I>meta prefix</I>).
+The default is <I>On</I>, but readline will set it to <I>Off</I> if the
+locale contains eight-bit characters.
+<DT><B>disable-completion (Off)</B>
+
+<DD>
+If set to <B>On</B>, readline will inhibit word completion.  Completion
+characters will be inserted into the line as if they had been
+mapped to <B>self-insert</B>.
+<DT><B>echo-control-characters (On)</B>
+
+<DD>
+When set to <B>On</B>, on operating systems that indicate they support it,
+readline echoes a character corresponding to a signal generated from the
+keyboard.
+<DT><B>editing-mode (emacs)</B>
+
+<DD>
+Controls whether readline begins with a set of key bindings similar
+to <I>Emacs</I> or <I>vi</I>.
+<B>editing-mode</B>
+
+can be set to either
+<B>emacs</B>
+
+or
+<B>vi</B>.
+
+<DT><B>emacs-mode-string (@)</B>
+
+<DD>
+If the <I>show-mode-in-prompt</I> variable is enabled,
+this string is displayed immediately before the last line of the primary
+prompt when emacs editing mode is active.  The value is expanded like a
+key binding, so the standard set of meta- and control prefixes and
+backslash escape sequences is available.
+Use the \1 and \2 escapes to begin and end sequences of
+non-printing characters, which can be used to embed a terminal control
+sequence into the mode string.
+<DT><B>enable-bracketed-paste (On)</B>
+
+<DD>
+When set to <B>On</B>, readline will configure the terminal in a way
+that will enable it to insert each paste into the editing buffer as a
+single string of characters, instead of treating each character as if
+it had been read from the keyboard.  This can prevent pasted characters
+from being interpreted as editing commands.
+<DT><B>enable-keypad (Off)</B>
+
+<DD>
+When set to <B>On</B>, readline will try to enable the application
+keypad when it is called.  Some systems need this to enable the
+arrow keys.
+<DT><B>enable-meta-key (On)</B>
+
+<DD>
+When set to <B>On</B>, readline will try to enable any meta modifier
+key the terminal claims to support when it is called.  On many terminals,
+the meta key is used to send eight-bit characters.
+<DT><B>expand-tilde (Off)</B>
+
+<DD>
+If set to <B>On</B>, tilde expansion is performed when readline
+attempts word completion.
+<DT><B>history-preserve-point (Off)</B>
+
+<DD>
+If set to <B>On</B>, the history code attempts to place point at the
+same location on each history line retrieved with <B>previous-history</B>
+or <B>next-history</B>.
+<DT><B>history-size (unset)</B>
+
+<DD>
+Set the maximum number of history entries saved in the history list.
+If set to zero, any existing history entries are deleted and no new entries
+are saved.
+If set to a value less than zero, the number of history entries is not
+limited.
+By default, the number of history entries is set to the value of the
+<B>HISTSIZE</B> shell variable.
+If an attempt is made to set <I>history-size</I> to a non-numeric value,
+the maximum number of history entries will be set to 500.
+<DT><B>horizontal-scroll-mode (Off)</B>
+
+<DD>
+When set to <B>On</B>, makes readline use a single line for display,
+scrolling the input horizontally on a single screen line when it
+becomes longer than the screen width rather than wrapping to a new line.
+This setting is automatically enabled for terminals of height 1.
+<DT><B>input-meta (Off)</B>
+
+<DD>
+If set to <B>On</B>, readline will enable eight-bit input (that is,
+it will not strip the eighth bit from the characters it reads),
+regardless of what the terminal claims it can support.  The name
+<B>meta-flag</B>
+
+is a synonym for this variable.
+The default is <I>Off</I>, but readline will set it to <I>On</I> if the
+locale contains eight-bit characters.
+<DT><B>isearch-terminators (``C-[C-J'')</B>
+
+<DD>
+The string of characters that should terminate an incremental
+search without subsequently executing the character as a command.
+If this variable has not been given a value, the characters
+<I>ESC</I> and <I>C-J</I> will terminate an incremental search.
+<DT><B>keymap (emacs)</B>
+
+<DD>
+Set the current readline keymap.  The set of valid keymap names is
+<I>emacs, emacs-standard, emacs-meta, emacs-ctlx, vi,
+vi-command</I>, and
+<I>vi-insert</I>.
+
+<I>vi</I> is equivalent to <I>vi-command</I>; <I>emacs</I> is
+equivalent to <I>emacs-standard</I>.  The default value is
+<I>emacs</I>;
+
+the value of
+<B>editing-mode</B>
+
+also affects the default keymap.
+<DT><B>keyseq-timeout (500)</B>
+
+<DD>
+Specifies the duration <I>readline</I> will wait for a character when reading an
+ambiguous key sequence (one that can form a complete key sequence using
+the input read so far, or can take additional input to complete a longer
+key sequence).
+If no input is received within the timeout, <I>readline</I> will use the shorter
+but complete key sequence.
+The value is specified in milliseconds, so a value of 1000 means that
+<I>readline</I> will wait one second for additional input.
+If this variable is set to a value less than or equal to zero, or to a
+non-numeric value, <I>readline</I> will wait until another key is pressed to
+decide which key sequence to complete.
+<DT><B>mark-directories (On)</B>
+
+<DD>
+If set to <B>On</B>, completed directory names have a slash
+appended.
+<DT><B>mark-modified-lines (Off)</B>
+
+<DD>
+If set to <B>On</B>, history lines that have been modified are displayed
+with a preceding asterisk (<B>*</B>).
+<DT><B>mark-symlinked-directories (Off)</B>
+
+<DD>
+If set to <B>On</B>, completed names which are symbolic links to directories
+have a slash appended (subject to the value of
+<B>mark-directories</B>).
+<DT><B>match-hidden-files (On)</B>
+
+<DD>
+This variable, when set to <B>On</B>, causes readline to match files whose
+names begin with a `.' (hidden files) when performing filename
+completion.
+If set to <B>Off</B>, the leading `.' must be
+supplied by the user in the filename to be completed.
+<DT><B>menu-complete-display-prefix (Off)</B>
+
+<DD>
+If set to <B>On</B>, menu completion displays the common prefix of the
+list of possible completions (which may be empty) before cycling through
+the list.
+<DT><B>output-meta (Off)</B>
+
+<DD>
+If set to <B>On</B>, readline will display characters with the
+eighth bit set directly rather than as a meta-prefixed escape
+sequence.
+The default is <I>Off</I>, but readline will set it to <I>On</I> if the
+locale contains eight-bit characters.
+<DT><B>page-completions (On)</B>
+
+<DD>
+If set to <B>On</B>, readline uses an internal <I>more</I>-like pager
+to display a screenful of possible completions at a time.
+<DT><B>print-completions-horizontally (Off)</B>
+
+<DD>
+If set to <B>On</B>, readline will display completions with matches
+sorted horizontally in alphabetical order, rather than down the screen.
+<DT><B>revert-all-at-newline (Off)</B>
+
+<DD>
+If set to <B>On</B>, readline will undo all changes to history lines
+before returning when <B>accept-line</B> is executed.  By default,
+history lines may be modified and retain individual undo lists across
+calls to <B>readline</B>.
+<DT><B>show-all-if-ambiguous (Off)</B>
+
+<DD>
+This alters the default behavior of the completion functions.  If
+set to
+<B>On</B>,
+
+words which have more than one possible completion cause the
+matches to be listed immediately instead of ringing the bell.
+<DT><B>show-all-if-unmodified (Off)</B>
+
+<DD>
+This alters the default behavior of the completion functions in
+a fashion similar to <B>show-all-if-ambiguous</B>.
+If set to
+<B>On</B>,
+
+words which have more than one possible completion without any
+possible partial completion (the possible completions don't share
+a common prefix) cause the matches to be listed immediately instead
+of ringing the bell.
+<DT><B>show-mode-in-prompt (Off)</B>
+
+<DD>
+If set to <B>On</B>, add a string to the beginning of the prompt
+indicating the editing mode: emacs, vi command, or vi insertion.
+The mode strings are user-settable (e.g., <I>emacs-mode-string</I>).
+<DT><B>skip-completed-text (Off)</B>
+
+<DD>
+If set to <B>On</B>, this alters the default completion behavior when
+inserting a single match into the line.  It's only active when
+performing completion in the middle of a word.  If enabled, readline
+does not insert characters from the completion that match characters
+after point in the word being completed, so portions of the word
+following the cursor are not duplicated.
+<DT><B>vi-cmd-mode-string ((cmd))</B>
+
+<DD>
+If the <I>show-mode-in-prompt</I> variable is enabled,
+this string is displayed immediately before the last line of the primary
+prompt when vi editing mode is active and in command mode.
+The value is expanded like a
+key binding, so the standard set of meta- and control prefixes and
+backslash escape sequences is available.
+Use the \1 and \2 escapes to begin and end sequences of
+non-printing characters, which can be used to embed a terminal control
+sequence into the mode string.
+<DT><B>vi-ins-mode-string ((ins))</B>
+
+<DD>
+If the <I>show-mode-in-prompt</I> variable is enabled,
+this string is displayed immediately before the last line of the primary
+prompt when vi editing mode is active and in insertion mode.
+The value is expanded like a
+key binding, so the standard set of meta- and control prefixes and
+backslash escape sequences is available.
+Use the \1 and \2 escapes to begin and end sequences of
+non-printing characters, which can be used to embed a terminal control
+sequence into the mode string.
+<DT><B>visible-stats (Off)</B>
+
+<DD>
+If set to <B>On</B>, a character denoting a file's type as reported
+by <I>stat</I>(2) is appended to the filename when listing possible
+completions.
+
+</DL>
+<A NAME="lbCK">&nbsp;</A>
+<H4>Readline Conditional Constructs</H4>
+
+Readline implements a facility similar in spirit to the conditional
+compilation features of the C preprocessor which allows key
+bindings and variable settings to be performed as the result
+of tests.  There are four parser directives used.
+<DL COMPACT>
+<DT><B>$if</B><DD>
+The
+<B>$if</B>
+
+construct allows bindings to be made based on the
+editing mode, the terminal being used, or the application using
+readline.  The text of the test, after any comparison operator,
+<BR>&nbsp;extends&nbsp;to&nbsp;the&nbsp;end&nbsp;of&nbsp;the&nbsp;line;
+unless otherwise noted, no characters are required to isolate it.
+<DL COMPACT><DT><DD>
+<DL COMPACT>
+<DT><B>mode</B><DD>
+The <B>mode=</B> form of the <B>$if</B> directive is used to test
+whether readline is in emacs or vi mode.
+This may be used in conjunction
+with the <B>set keymap</B> command, for instance, to set bindings in
+the <I>emacs-standard</I> and <I>emacs-ctlx</I> keymaps only if
+readline is starting out in emacs mode.
+<DT><B>term</B><DD>
+The <B>term=</B> form may be used to include terminal-specific
+key bindings, perhaps to bind the key sequences output by the
+terminal's function keys.  The word on the right side of the
+<B>=</B>
+
+is tested against both the full name of the terminal and the portion
+of the terminal name before the first <B>-</B>.  This allows
+<I>sun</I>
+
+to match both
+<I>sun</I>
+
+and
+<I>sun-cmd</I>,
+
+for instance.
+<DT><B>version</B><DD>
+The <B>version</B> test may be used to perform comparisons against
+specific readline versions.
+The <B>version</B> expands to the current readline version.
+The set of comparison operators includes
+<B>=</B>,
+
+(and
+<B>==</B>),
+
+<B>!=</B>,
+
+<B>&lt;=</B>,
+
+<B>&gt;=</B>,
+
+<B>&lt;</B>,
+
+and
+<B>&gt;</B>.
+
+The version number supplied on the right side of the operator consists
+of a major version number, an optional decimal point, and an optional
+minor version (e.g., <B>7.1</B>). If the minor version is omitted, it
+is assumed to be <B>0</B>.
+The operator may be separated from the string <B>version</B>
+and from the version number argument by whitespace.
+<DT><B>application</B><DD>
+The <B>application</B> construct is used to include
+application-specific settings.  Each program using the readline
+library sets the <I>application name</I>, and an initialization
+file can test for a particular value.
+This could be used to bind key sequences to functions useful for
+a specific program.  For instance, the following command adds a
+key sequence that quotes the current or previous word in <B>bash</B>:
+<P>
+<DL COMPACT><DT><DD>
+<PRE>
+<B>$if</B> Bash
+# Quote the current or previous word
+&quot;\C-xq&quot;: &quot;\eb\&quot;\ef\&quot;&quot;
+<B>$endif</B>
+</PRE>
+
+</DL>
+
+<DT><I>variable</I><DD>
+The <I>variable</I> construct provides simple equality tests for readline
+variables and values.
+The permitted comparison operators are <I>=</I>, <I>==</I>, and <I>!=</I>.
+The variable name must be separated from the comparison operator by
+whitespace; the operator may be separated from the value on the right hand
+side by whitespace.
+Both string and boolean variables may be tested. Boolean variables must be
+tested against the values <I>on</I> and <I>off</I>.
+</DL></DL>
+
+<DT><B>$endif</B><DD>
+This command, as seen in the previous example, terminates an
+<B>$if</B> command.
+<DT><B>$else</B><DD>
+Commands in this branch of the <B>$if</B> directive are executed if
+the test fails.
+<DT><B>$include</B><DD>
+This directive takes a single filename as an argument and reads commands
+and bindings from that file.  For example, the following directive
+would read <A HREF="file:/etc/inputrc"><I>/etc/inputrc</I></A>:
+<P>
+<DL COMPACT><DT><DD>
+<PRE>
+<B>$include</B>  <A HREF="file:/etc/inputrc"><I>/etc/inputrc</I></A>
+</PRE>
+
+</DL>
+
+</DL>
+<A NAME="lbCL">&nbsp;</A>
+<H4>Searching</H4>
+
+Readline provides commands for searching through the command history
+(see
+<FONT SIZE=-1><B>HISTORY</B>
+
+</FONT>
+below) for lines containing a specified string.
+There are two search modes:
+<I>incremental</I>
+
+and
+<I>non-incremental</I>.
+
+<P>
+
+Incremental searches begin before the user has finished typing the
+search string.
+As each character of the search string is typed, readline displays
+the next entry from the history matching the string typed so far.
+An incremental search requires only as many characters as needed to
+find the desired history entry.
+The characters present in the value of the <B>isearch-terminators</B>
+variable are used to terminate an incremental search.
+If that variable has not been assigned a value the Escape and
+Control-J characters will terminate an incremental search.
+Control-G will abort an incremental search and restore the original
+line.
+When the search is terminated, the history entry containing the
+search string becomes the current line.
+<P>
+
+To find other matching entries in the history list, type Control-S or
+Control-R as appropriate.
+This will search backward or forward in the history for the next
+entry matching the search string typed so far.
+Any other key sequence bound to a readline command will terminate
+the search and execute that command.
+For instance, a <I>newline</I> will terminate the search and accept
+the line, thereby executing the command from the history list.
+<P>
+
+Readline remembers the last incremental search string.  If two
+Control-Rs are typed without any intervening characters defining a
+new search string, any remembered search string is used.
+<P>
+
+Non-incremental searches read the entire search string before starting
+to search for matching history lines.  The search string may be
+typed by the user or be part of the contents of the current line.
+<A NAME="lbCM">&nbsp;</A>
+<H4>Readline Command Names</H4>
+
+The following is a list of the names of the commands and the default
+key sequences to which they are bound.
+Command names without an accompanying key sequence are unbound by default.
+In the following descriptions, <I>point</I> refers to the current cursor
+position, and <I>mark</I> refers to a cursor position saved by the
+<B>set-mark</B> command.
+The text between the point and mark is referred to as the <I>region</I>.
+<A NAME="lbCN">&nbsp;</A>
+<H4>Commands for Moving</H4>
+
+
+<DL COMPACT>
+<DT><B>beginning-of-line (C-a)</B>
+
+<DD>
+Move to the start of the current line.
+<DT><B>end-of-line (C-e)</B>
+
+<DD>
+Move to the end of the line.
+<DT><B>forward-char (C-f)</B>
+
+<DD>
+Move forward a character.
+<DT><B>backward-char (C-b)</B>
+
+<DD>
+Move back a character.
+<DT><B>forward-word (M-f)</B>
+
+<DD>
+Move forward to the end of the next word.  Words are composed of
+alphanumeric characters (letters and digits).
+<DT><B>backward-word (M-b)</B>
+
+<DD>
+Move back to the start of the current or previous word.
+Words are composed of alphanumeric characters (letters and digits).
+<DT><B>shell-forward-word</B>
+
+<DD>
+Move forward to the end of the next word.
+Words are delimited by non-quoted shell metacharacters.
+<DT><B>shell-backward-word</B>
+
+<DD>
+Move back to the start of the current or previous word.
+Words are delimited by non-quoted shell metacharacters.
+<DT><B>previous-screen-line</B>
+
+<DD>
+Attempt to move point to the same physical screen column on the previous
+physical screen line. This will not have the desired effect if the current
+Readline line does not take up more than one physical line or if point is not
+greater than the length of the prompt plus the screen width.
+<DT><B>next-screen-line</B>
+
+<DD>
+Attempt to move point to the same physical screen column on the next
+physical screen line. This will not have the desired effect if the current
+Readline line does not take up more than one physical line or if the length
+of the current Readline line is not greater than the length of the prompt
+plus the screen width.
+<DT><B>clear-display (M-C-l)</B>
+
+<DD>
+Clear the screen and, if possible, the terminal's scrollback buffer,
+then redraw the current line,
+leaving the current line at the top of the screen.
+<DT><B>clear-screen (C-l)</B>
+
+<DD>
+Clear the screen,
+then redraw the current line,
+leaving the current line at the top of the screen.
+With an argument, refresh the current line without clearing the
+screen.
+<DT><B>redraw-current-line</B>
+
+<DD>
+Refresh the current line.
+
+</DL>
+<A NAME="lbCO">&nbsp;</A>
+<H4>Commands for Manipulating the History</H4>
+
+
+<DL COMPACT>
+<DT><B>accept-line (Newline, Return)</B>
+
+<DD>
+Accept the line regardless of where the cursor is.  If this line is
+non-empty, add it to the history list according to the state of the
+<FONT SIZE=-1><B>HISTCONTROL</B>
+
+</FONT>
+variable.  If the line is a modified history
+line, then restore the history line to its original state.
+<DT><B>previous-history (C-p)</B>
+
+<DD>
+Fetch the previous command from the history list, moving back in
+the list.
+<DT><B>next-history (C-n)</B>
+
+<DD>
+Fetch the next command from the history list, moving forward in the
+list.
+<DT><B>beginning-of-history (M-&lt;)</B>
+
+<DD>
+Move to the first line in the history.
+<DT><B>end-of-history (M-&gt;)</B>
+
+<DD>
+Move to the end of the input history, i.e., the line currently being
+entered.
+<DT><B>reverse-search-history (C-r)</B>
+
+<DD>
+Search backward starting at the current line and moving `up' through
+the history as necessary.  This is an incremental search.
+<DT><B>forward-search-history (C-s)</B>
+
+<DD>
+Search forward starting at the current line and moving `down' through
+the history as necessary.  This is an incremental search.
+<DT><B>non-incremental-reverse-search-history (M-p)</B>
+
+<DD>
+Search backward through the history starting at the current line
+using a non-incremental search for a string supplied by the user.
+<DT><B>non-incremental-forward-search-history (M-n)</B>
+
+<DD>
+Search forward through the history using a non-incremental search for
+a string supplied by the user.
+<DT><B>history-search-forward</B>
+
+<DD>
+Search forward through the history for the string of characters
+between the start of the current line and the point.
+This is a non-incremental search.
+<DT><B>history-search-backward</B>
+
+<DD>
+Search backward through the history for the string of characters
+between the start of the current line and the point.
+This is a non-incremental search.
+<DT><B>history-substring-search-backward</B>
+
+<DD>
+Search backward through the history for the string of characters
+between the start of the current line and the current cursor
+position (the <I>point</I>).
+The search string may match anywhere in a history line.
+This is a non-incremental search.
+<DT><B>history-substring-search-forward</B>
+
+<DD>
+Search forward through the history for the string of characters
+between the start of the current line and the point.
+The search string may match anywhere in a history line.
+This is a non-incremental search.
+<DT><B>yank-nth-arg (M-C-y)</B>
+
+<DD>
+Insert the first argument to the previous command (usually
+the second word on the previous line) at point.
+With an argument
+<I>n</I>,
+
+insert the <I>n</I>th word from the previous command (the words
+in the previous command begin with word 0).  A negative argument
+inserts the <I>n</I>th word from the end of the previous command.
+Once the argument <I>n</I> is computed, the argument is extracted
+as if the &quot;!<I>n</I>&quot; history expansion had been specified.
+<DT><B>yank-last-arg (M-., M-_)</B>
+
+<DD>
+Insert the last argument to the previous command (the last word of
+the previous history entry).
+With a numeric argument, behave exactly like <B>yank-nth-arg</B>.
+Successive calls to <B>yank-last-arg</B> move back through the history
+list, inserting the last word (or the word specified by the argument to
+the first call) of each line in turn.
+Any numeric argument supplied to these successive calls determines
+the direction to move through the history.  A negative argument switches
+the direction through the history (back or forward).
+The history expansion facilities are used to extract the last word,
+as if the &quot;!$&quot; history expansion had been specified.
+<DT><B>shell-expand-line (M-C-e)</B>
+
+<DD>
+Expand the line as the shell does.  This
+performs alias and history expansion as well as all of the shell
+word expansions.  See
+<FONT SIZE=-1><B>HISTORY EXPANSION</B>
+
+</FONT>
+below for a description of history expansion.
+<DT><B>history-expand-line (M-^)</B>
+
+<DD>
+Perform history expansion on the current line.
+See
+<FONT SIZE=-1><B>HISTORY EXPANSION</B>
+
+</FONT>
+below for a description of history expansion.
+<DT><B>magic-space</B>
+
+<DD>
+Perform history expansion on the current line and insert a space.
+See
+<FONT SIZE=-1><B>HISTORY EXPANSION</B>
+
+</FONT>
+below for a description of history expansion.
+<DT><B>alias-expand-line</B>
+
+<DD>
+Perform alias expansion on the current line.
+See
+<FONT SIZE=-1><B>ALIASES</B>
+
+</FONT>
+above for a description of alias expansion.
+<DT><B>history-and-alias-expand-line</B>
+
+<DD>
+Perform history and alias expansion on the current line.
+<DT><B>insert-last-argument (M-., M-_)</B>
+
+<DD>
+A synonym for <B>yank-last-arg</B>.
+<DT><B>operate-and-get-next (C-o)</B>
+
+<DD>
+Accept the current line for execution and fetch the next line
+relative to the current line from the history for editing.
+A numeric argument, if supplied, specifies the history entry to use instead
+of the current line.
+<DT><B>edit-and-execute-command (C-x C-e)</B>
+
+<DD>
+Invoke an editor on the current command line, and execute the result as shell
+commands.
+<B>Bash</B> attempts to invoke
+<FONT SIZE=-1><B>$VISUAL</B>,
+
+</FONT>
+<FONT SIZE=-1><B>$EDITOR</B>,
+
+</FONT>
+and <I>emacs</I> as the editor, in that order.
+
+</DL>
+<A NAME="lbCP">&nbsp;</A>
+<H4>Commands for Changing Text</H4>
+
+
+<DL COMPACT>
+<DT><B></B><I>end-of-file</I> (usually C-d)
+
+<DD>
+The character indicating end-of-file as set, for example, by
+<TT>stty</TT>.
+
+If this character is read when there are no characters
+on the line, and point is at the beginning of the line, Readline
+interprets it as the end of input and returns
+<FONT SIZE=-1><B>EOF</B>.
+
+</FONT>
+<DT><B>delete-char (C-d)</B>
+
+<DD>
+Delete the character at point.
+If this function is bound to the
+same character as the tty <B>EOF</B> character, as <B>C-d</B>
+commonly is, see above for the effects.
+<DT><B>backward-delete-char (Rubout)</B>
+
+<DD>
+Delete the character behind the cursor.  When given a numeric argument,
+save the deleted text on the kill ring.
+<DT><B>forward-backward-delete-char</B>
+
+<DD>
+Delete the character under the cursor, unless the cursor is at the
+end of the line, in which case the character behind the cursor is
+deleted.
+<DT><B>quoted-insert (C-q, C-v)</B>
+
+<DD>
+Add the next character typed to the line verbatim.  This is
+how to insert characters like <B>C-q</B>, for example.
+<DT><B>tab-insert (C-v TAB)</B>
+
+<DD>
+Insert a tab character.
+<DT><B>self-insert (a,&nbsp;b,&nbsp;A,&nbsp;1,&nbsp;!,&nbsp;...)</B>
+
+<DD>
+Insert the character typed.
+<DT><B>transpose-chars (C-t)</B>
+
+<DD>
+Drag the character before point forward over the character at point,
+moving point forward as well.
+If point is at the end of the line, then this transposes
+the two characters before point.
+Negative arguments have no effect.
+<DT><B>transpose-words (M-t)</B>
+
+<DD>
+Drag the word before point past the word after point,
+moving point over that word as well.
+If point is at the end of the line, this transposes
+the last two words on the line.
+<DT><B>upcase-word (M-u)</B>
+
+<DD>
+Uppercase the current (or following) word.  With a negative argument,
+uppercase the previous word, but do not move point.
+<DT><B>downcase-word (M-l)</B>
+
+<DD>
+Lowercase the current (or following) word.  With a negative argument,
+lowercase the previous word, but do not move point.
+<DT><B>capitalize-word (M-c)</B>
+
+<DD>
+Capitalize the current (or following) word.  With a negative argument,
+capitalize the previous word, but do not move point.
+<DT><B>overwrite-mode</B>
+
+<DD>
+Toggle overwrite mode.  With an explicit positive numeric argument,
+switches to overwrite mode.  With an explicit non-positive numeric
+argument, switches to insert mode.  This command affects only
+<B>emacs</B> mode; <B>vi</B> mode does overwrite differently.
+Each call to <I>readline()</I> starts in insert mode.
+In overwrite mode, characters bound to <B>self-insert</B> replace
+the text at point rather than pushing the text to the right.
+Characters bound to <B>backward-delete-char</B> replace the character
+before point with a space.  By default, this command is unbound.
+
+</DL>
+<A NAME="lbCQ">&nbsp;</A>
+<H4>Killing and Yanking</H4>
+
+
+<DL COMPACT>
+<DT><B>kill-line (C-k)</B>
+
+<DD>
+Kill the text from point to the end of the line.
+<DT><B>backward-kill-line (C-x Rubout)</B>
+
+<DD>
+Kill backward to the beginning of the line.
+<DT><B>unix-line-discard (C-u)</B>
+
+<DD>
+Kill backward from point to the beginning of the line.
+The killed text is saved on the kill-ring.
+
+<DT><B>kill-whole-line</B>
+
+<DD>
+Kill all characters on the current line, no matter where point is.
+<DT><B>kill-word (M-d)</B>
+
+<DD>
+Kill from point to the end of the current word, or if between
+words, to the end of the next word.
+Word boundaries are the same as those used by <B>forward-word</B>.
+<DT><B>backward-kill-word (M-Rubout)</B>
+
+<DD>
+Kill the word behind point.
+Word boundaries are the same as those used by <B>backward-word</B>.
+<DT><B>shell-kill-word</B>
+
+<DD>
+Kill from point to the end of the current word, or if between
+words, to the end of the next word.
+Word boundaries are the same as those used by <B>shell-forward-word</B>.
+<DT><B>shell-backward-kill-word</B>
+
+<DD>
+Kill the word behind point.
+Word boundaries are the same as those used by <B>shell-backward-word</B>.
+<DT><B>unix-word-rubout (C-w)</B>
+
+<DD>
+Kill the word behind point, using white space as a word boundary.
+The killed text is saved on the kill-ring.
+<DT><B>unix-filename-rubout</B>
+
+<DD>
+Kill the word behind point, using white space and the slash character
+as the word boundaries.
+The killed text is saved on the kill-ring.
+<DT><B>delete-horizontal-space (M-\)</B>
+
+<DD>
+Delete all spaces and tabs around point.
+<DT><B>kill-region</B>
+
+<DD>
+Kill the text in the current region.
+<DT><B>copy-region-as-kill</B>
+
+<DD>
+Copy the text in the region to the kill buffer.
+<DT><B>copy-backward-word</B>
+
+<DD>
+Copy the word before point to the kill buffer.
+The word boundaries are the same as <B>backward-word</B>.
+<DT><B>copy-forward-word</B>
+
+<DD>
+Copy the word following point to the kill buffer.
+The word boundaries are the same as <B>forward-word</B>.
+<DT><B>yank (C-y)</B>
+
+<DD>
+Yank the top of the kill ring into the buffer at point.
+<DT><B>yank-pop (M-y)</B>
+
+<DD>
+Rotate the kill ring, and yank the new top.  Only works following
+<B>yank</B>
+
+or
+<B>yank-pop</B>.
+
+
+</DL>
+<A NAME="lbCR">&nbsp;</A>
+<H4>Numeric Arguments</H4>
+
+
+<DL COMPACT>
+<DT><B>digit-argument (M-0, M-1, ..., M--)</B>
+
+<DD>
+Add this digit to the argument already accumulating, or start a new
+argument.  M-- starts a negative argument.
+<DT><B>universal-argument</B>
+
+<DD>
+This is another way to specify an argument.
+If this command is followed by one or more digits, optionally with a
+leading minus sign, those digits define the argument.
+If the command is followed by digits, executing
+<B>universal-argument</B>
+
+again ends the numeric argument, but is otherwise ignored.
+As a special case, if this command is immediately followed by a
+character that is neither a digit nor minus sign, the argument count
+for the next command is multiplied by four.
+The argument count is initially one, so executing this function the
+first time makes the argument count four, a second time makes the
+argument count sixteen, and so on.
+
+</DL>
+<A NAME="lbCS">&nbsp;</A>
+<H4>Completing</H4>
+
+
+<DL COMPACT>
+<DT><B>complete (TAB)</B>
+
+<DD>
+Attempt to perform completion on the text before point.
+<B>Bash</B>
+
+attempts completion treating the text as a variable (if the
+text begins with <B>$</B>), username (if the text begins with
+<B>~</B>), hostname (if the text begins with <B>@</B>), or
+command (including aliases and functions) in turn.  If none
+of these produces a match, filename completion is attempted.
+<DT><B>possible-completions (M-?)</B>
+
+<DD>
+List the possible completions of the text before point.
+<DT><B>insert-completions (M-*)</B>
+
+<DD>
+Insert all completions of the text before point
+that would have been generated by
+<B>possible-completions</B>.
+<DT><B>menu-complete</B>
+
+<DD>
+Similar to <B>complete</B>, but replaces the word to be completed
+with a single match from the list of possible completions.
+Repeated execution of <B>menu-complete</B> steps through the list
+of possible completions, inserting each match in turn.
+At the end of the list of completions, the bell is rung
+(subject to the setting of <B>bell-style</B>)
+and the original text is restored.
+An argument of <I>n</I> moves <I>n</I> positions forward in the list
+of matches; a negative argument may be used to move backward
+through the list.
+This command is intended to be bound to <B>TAB</B>, but is unbound
+by default.
+<DT><B>menu-complete-backward</B>
+
+<DD>
+Identical to <B>menu-complete</B>, but moves backward through the list
+of possible completions, as if <B>menu-complete</B> had been given a
+negative argument.  This command is unbound by default.
+<DT><B>delete-char-or-list</B>
+
+<DD>
+Deletes the character under the cursor if not at the beginning or
+end of the line (like <B>delete-char</B>).
+If at the end of the line, behaves identically to
+<B>possible-completions</B>.
+This command is unbound by default.
+<DT><B>complete-filename (M-/)</B>
+
+<DD>
+Attempt filename completion on the text before point.
+<DT><B>possible-filename-completions (C-x /)</B>
+
+<DD>
+List the possible completions of the text before point,
+treating it as a filename.
+<DT><B>complete-username (M-~)</B>
+
+<DD>
+Attempt completion on the text before point, treating
+it as a username.
+<DT><B>possible-username-completions (C-x ~)</B>
+
+<DD>
+List the possible completions of the text before point,
+treating it as a username.
+<DT><B>complete-variable (M-$)</B>
+
+<DD>
+Attempt completion on the text before point, treating
+it as a shell variable.
+<DT><B>possible-variable-completions (C-x $)</B>
+
+<DD>
+List the possible completions of the text before point,
+treating it as a shell variable.
+<DT><B>complete-hostname (M-@)</B>
+
+<DD>
+Attempt completion on the text before point, treating
+it as a hostname.
+<DT><B>possible-hostname-completions (C-x @)</B>
+
+<DD>
+List the possible completions of the text before point,
+treating it as a hostname.
+<DT><B>complete-command (M-!)</B>
+
+<DD>
+Attempt completion on the text before point, treating
+it as a command name.  Command completion attempts to
+match the text against aliases, reserved words, shell
+functions, shell builtins, and finally executable filenames,
+in that order.
+<DT><B>possible-command-completions (C-x !)</B>
+
+<DD>
+List the possible completions of the text before point,
+treating it as a command name.
+<DT><B>dynamic-complete-history (M-TAB)</B>
+
+<DD>
+Attempt completion on the text before point, comparing
+the text against lines from the history list for possible
+completion matches.
+<DT><B>dabbrev-expand</B>
+
+<DD>
+Attempt menu completion on the text before point, comparing
+the text against lines from the history list for possible
+completion matches.
+<DT><B>complete-into-braces (M-{)</B>
+
+<DD>
+Perform filename completion and insert the list of possible completions
+enclosed within braces so the list is available to the shell (see
+<B>Brace Expansion</B>
+
+above).
+
+</DL>
+<A NAME="lbCT">&nbsp;</A>
+<H4>Keyboard Macros</H4>
+
+
+<DL COMPACT>
+<DT><B>start-kbd-macro (C-x ()</B>
+
+<DD>
+Begin saving the characters typed into the current keyboard macro.
+<DT><B>end-kbd-macro (C-x ))</B>
+
+<DD>
+Stop saving the characters typed into the current keyboard macro
+and store the definition.
+<DT><B>call-last-kbd-macro (C-x e)</B>
+
+<DD>
+Re-execute the last keyboard macro defined, by making the characters
+in the macro appear as if typed at the keyboard.
+<DT><B>print-last-kbd-macro ()</B>
+
+<DD>
+Print the last keyboard macro defined in a format suitable for the
+<I>inputrc</I> file.
+
+</DL>
+<A NAME="lbCU">&nbsp;</A>
+<H4>Miscellaneous</H4>
+
+
+<DL COMPACT>
+<DT><B>re-read-init-file (C-x C-r)</B>
+
+<DD>
+Read in the contents of the <I>inputrc</I> file, and incorporate
+any bindings or variable assignments found there.
+<DT><B>abort (C-g)</B>
+
+<DD>
+Abort the current editing command and
+ring the terminal's bell (subject to the setting of
+<B>bell-style</B>).
+
+<DT><B>do-lowercase-version (M-A, M-B, M-</B><I>x</I>, ...)
+
+<DD>
+If the metafied character <I>x</I> is uppercase, run the command
+that is bound to the corresponding metafied lowercase character.
+The behavior is undefined if <I>x</I> is already lowercase.
+<DT><B>prefix-meta (ESC)</B>
+
+<DD>
+Metafy the next character typed.
+<FONT SIZE=-1><B>ESC</B>
+
+</FONT>
+<B>f</B>
+
+is equivalent to
+<B>Meta-f</B>.
+
+<DT><B>undo (C-_, C-x C-u)</B>
+
+<DD>
+Incremental undo, separately remembered for each line.
+<DT><B>revert-line (M-r)</B>
+
+<DD>
+Undo all changes made to this line.  This is like executing the
+<B>undo</B>
+
+command enough times to return the line to its initial state.
+<DT><B>tilde-expand (M-&amp;)</B>
+
+<DD>
+Perform tilde expansion on the current word.
+<DT><B>set-mark (C-@, M-&lt;space&gt;)</B>
+
+<DD>
+Set the mark to the point.  If a
+numeric argument is supplied, the mark is set to that position.
+<DT><B>exchange-point-and-mark (C-x C-x)</B>
+
+<DD>
+Swap the point with the mark.  The current cursor position is set to
+the saved position, and the old cursor position is saved as the mark.
+<DT><B>character-search (C-])</B>
+
+<DD>
+A character is read and point is moved to the next occurrence of that
+character.  A negative count searches for previous occurrences.
+<DT><B>character-search-backward (M-C-])</B>
+
+<DD>
+A character is read and point is moved to the previous occurrence of that
+character.  A negative count searches for subsequent occurrences.
+<DT><B>skip-csi-sequence</B>
+
+<DD>
+Read enough characters to consume a multi-key sequence such as those
+defined for keys like Home and End.  Such sequences begin with a
+Control Sequence Indicator (CSI), usually ESC-[.  If this sequence is
+bound to &quot;\[&quot;, keys producing such sequences will have no effect
+unless explicitly bound to a readline command, instead of inserting
+stray characters into the editing buffer.  This is unbound by default,
+but usually bound to ESC-[.
+<DT><B>insert-comment (M-#)</B>
+
+<DD>
+Without a numeric argument, the value of the readline
+<B>comment-begin</B>
+
+variable is inserted at the beginning of the current line.
+If a numeric argument is supplied, this command acts as a toggle: if
+the characters at the beginning of the line do not match the value
+of <B>comment-begin</B>, the value is inserted, otherwise
+the characters in <B>comment-begin</B> are deleted from the beginning of
+the line.
+In either case, the line is accepted as if a newline had been typed.
+The default value of
+<B>comment-begin</B> causes this command to make the current line
+a shell comment.
+If a numeric argument causes the comment character to be removed, the line
+will be executed by the shell.
+<DT><B>glob-complete-word (M-g)</B>
+
+<DD>
+The word before point is treated as a pattern for pathname expansion,
+with an asterisk implicitly appended.  This pattern is used to
+generate a list of matching filenames for possible completions.
+<DT><B>glob-expand-word (C-x *)</B>
+
+<DD>
+The word before point is treated as a pattern for pathname expansion,
+and the list of matching filenames is inserted, replacing the word.
+If a numeric argument is supplied, an asterisk is appended before
+pathname expansion.
+<DT><B>glob-list-expansions (C-x g)</B>
+
+<DD>
+The list of expansions that would have been generated by
+<B>glob-expand-word</B>
+
+is displayed, and the line is redrawn.
+If a numeric argument is supplied, an asterisk is appended before
+pathname expansion.
+<DT><B>dump-functions</B>
+
+<DD>
+Print all of the functions and their key bindings to the
+readline output stream.  If a numeric argument is supplied,
+the output is formatted in such a way that it can be made part
+of an <I>inputrc</I> file.
+<DT><B>dump-variables</B>
+
+<DD>
+Print all of the settable readline variables and their values to the
+readline output stream.  If a numeric argument is supplied,
+the output is formatted in such a way that it can be made part
+of an <I>inputrc</I> file.
+<DT><B>dump-macros</B>
+
+<DD>
+Print all of the readline key sequences bound to macros and the
+strings they output.  If a numeric argument is supplied,
+the output is formatted in such a way that it can be made part
+of an <I>inputrc</I> file.
+<DT><B>display-shell-version (C-x C-v)</B>
+
+<DD>
+Display version information about the current instance of
+<B>bash</B>.
+
+
+</DL>
+<A NAME="lbCV">&nbsp;</A>
+<H4>Programmable Completion</H4>
+
+When word completion is attempted for an argument to a command for
+which a completion specification (a <I>compspec</I>) has been defined
+using the <B>complete</B> builtin (see
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>
+
+</FONT>
+below), the programmable completion facilities are invoked.
+<P>
+
+First, the command name is identified.
+If the command word is the empty string (completion attempted at the
+beginning of an empty line), any compspec defined with
+the <B>-E</B> option to <B>complete</B> is used.
+If a compspec has been defined for that command, the
+compspec is used to generate the list of possible completions for the word.
+If the command word is a full pathname, a compspec for the full
+pathname is searched for first.
+If no compspec is found for the full pathname, an attempt is made to
+find a compspec for the portion following the final slash.
+If those searches do not result in a compspec, any compspec defined with
+the <B>-D</B> option to <B>complete</B> is used as the default.
+If there is no default compspec, <B>bash</B> attempts alias expansion
+on the command word as a final resort, and attempts to find a compspec
+for the command word from any successful expansion.
+<P>
+
+Once a compspec has been found, it is used to generate the list of
+matching words.
+If a compspec is not found, the default <B>bash</B> completion as
+described above under <B>Completing</B> is performed.
+<P>
+
+First, the actions specified by the compspec are used.
+Only matches which are prefixed by the word being completed are
+returned.
+When the
+<B>-f</B>
+
+or
+<B>-d</B>
+
+option is used for filename or directory name completion, the shell
+variable
+<FONT SIZE=-1><B>FIGNORE</B>
+
+</FONT>
+is used to filter the matches.
+<P>
+
+Any completions specified by a pathname expansion pattern to the
+<B>-G</B> option are generated next.
+The words generated by the pattern need not match the word
+being completed.
+The
+<FONT SIZE=-1><B>GLOBIGNORE</B>
+
+</FONT>
+shell variable is not used to filter the matches, but the
+<FONT SIZE=-1><B>FIGNORE</B>
+
+</FONT>
+variable is used.
+<P>
+
+Next, the string specified as the argument to the <B>-W</B> option
+is considered.
+The string is first split using the characters in the
+<FONT SIZE=-1><B>IFS</B>
+
+</FONT>
+special variable as delimiters.
+Shell quoting is honored.
+Each word is then expanded using
+brace expansion, tilde expansion, parameter and variable expansion,
+command substitution, and arithmetic expansion,
+as described above under
+<FONT SIZE=-1><B>EXPANSION</B>.
+
+</FONT>
+The results are split using the rules described above under
+<B>Word Splitting</B>.
+The results of the expansion are prefix-matched against the word being
+completed, and the matching words become the possible completions.
+<P>
+
+After these matches have been generated, any shell function or command
+specified with the <B>-F</B> and <B>-C</B> options is invoked.
+When the command or function is invoked, the
+<FONT SIZE=-1><B>COMP_LINE</B>,
+
+</FONT>
+<FONT SIZE=-1><B>COMP_POINT</B>,
+
+</FONT>
+<FONT SIZE=-1><B>COMP_KEY</B>,
+
+</FONT>
+and
+<FONT SIZE=-1><B>COMP_TYPE</B>
+
+</FONT>
+variables are assigned values as described above under
+<B>Shell Variables</B>.
+If a shell function is being invoked, the
+<FONT SIZE=-1><B>COMP_WORDS</B>
+
+</FONT>
+and
+<FONT SIZE=-1><B>COMP_CWORD</B>
+
+</FONT>
+variables are also set.
+When the function or command is invoked,
+the first argument (<B>$1</B>) is the name of the command whose arguments are
+being completed,
+the second argument (<B>$2</B>) is the word being completed,
+and the third argument (<B>$3</B>) is the word preceding the word being
+completed on the current command line.
+No filtering of the generated completions against the word being completed
+is performed; the function or command has complete freedom in generating
+the matches.
+<P>
+
+Any function specified with <B>-F</B> is invoked first.
+The function may use any of the shell facilities, including the
+<B>compgen</B> builtin described below, to generate the matches.
+It must put the possible completions in the
+<FONT SIZE=-1><B>COMPREPLY</B>
+
+</FONT>
+array variable, one per array element.
+<P>
+
+Next, any command specified with the <B>-C</B> option is invoked
+in an environment equivalent to command substitution.
+It should print a list of completions, one per line, to the
+standard output.
+Backslash may be used to escape a newline, if necessary.
+<P>
+
+After all of the possible completions are generated, any filter
+specified with the <B>-X</B> option is applied to the list.
+The filter is a pattern as used for pathname expansion; a <B>&amp;</B>
+in the pattern is replaced with the text of the word being completed.
+A literal <B>&amp;</B> may be escaped with a backslash; the backslash
+is removed before attempting a match.
+Any completion that matches the pattern will be removed from the list.
+A leading <B>!</B> negates the pattern; in this case any completion
+not matching the pattern will be removed.
+If the
+<B>nocasematch</B>
+
+shell option is enabled, the match is performed without regard to the case
+of alphabetic characters.
+<P>
+
+Finally, any prefix and suffix specified with the <B>-P</B> and <B>-S</B>
+options are added to each member of the completion list, and the result is
+returned to the readline completion code as the list of possible
+completions.
+<P>
+
+If the previously-applied actions do not generate any matches, and the
+<B>-o dirnames</B> option was supplied to <B>complete</B> when the
+compspec was defined, directory name completion is attempted.
+<P>
+
+If the <B>-o plusdirs</B> option was supplied to <B>complete</B> when the
+compspec was defined, directory name completion is attempted and any
+matches are added to the results of the other actions.
+<P>
+
+By default, if a compspec is found, whatever it generates is returned
+to the completion code as the full set of possible completions.
+The default <B>bash</B> completions are not attempted, and the readline
+default of filename completion is disabled.
+If the <B>-o bashdefault</B> option was supplied to <B>complete</B> when
+the compspec was defined, the <B>bash</B> default completions are attempted
+if the compspec generates no matches.
+If the <B>-o default</B> option was supplied to <B>complete</B> when the
+compspec was defined, readline's default completion will be performed
+if the compspec (and, if attempted, the default <B>bash</B> completions)
+generate no matches.
+<P>
+
+When a compspec indicates that directory name completion is desired,
+the programmable completion functions force readline to append a slash
+to completed names which are symbolic links to directories, subject to
+the value of the <B>mark-directories</B> readline variable, regardless
+of the setting of the <B>mark-symlinked-directories</B> readline variable.
+<P>
+
+There is some support for dynamically modifying completions.  This is
+most useful when used in combination with a default completion specified
+with <B>complete -D</B>.
+It's possible for shell functions executed as completion
+handlers to indicate that completion should be retried by returning an
+exit status of 124.  If a shell function returns 124, and changes
+the compspec associated with the command on which completion is being
+attempted (supplied as the first argument when the function is executed),
+programmable completion restarts from the beginning, with an
+attempt to find a new compspec for that command.  This allows a set of
+completions to be built dynamically as completion is attempted, rather than
+being loaded all at once.
+<P>
+
+For instance, assuming that there is a library of compspecs, each kept in a
+file corresponding to the name of the command, the following default
+completion function would load completions dynamically:
+<P>
+
+<TT>_completion_loader()
+<BR>
+
+{
+<BR>
+
+<TT>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</TT>. &quot;/etc/bash_completion.d/$1.sh&quot; &gt;/dev/null 2&gt;&amp;1 &amp;&amp; return 124<BR>
+<BR>
+
+}
+<BR>
+
+complete -D -F _completion_loader -o bashdefault -o default
+<BR>
+
+</TT>
+<A NAME="lbCW">&nbsp;</A>
+<H3>HISTORY</H3>
+
+When the
+<B>-o history</B>
+
+option to the
+<B>set</B>
+
+builtin is enabled, the shell provides access to the
+<I>command history</I>,
+the list of commands previously typed.
+The value of the
+<FONT SIZE=-1><B>HISTSIZE</B>
+
+</FONT>
+variable is used as the
+number of commands to save in a history list.
+The text of the last
+<FONT SIZE=-1><B>HISTSIZE</B>
+
+</FONT>
+commands (default 500) is saved.  The shell
+stores each command in the history list prior to parameter and
+variable expansion (see
+<FONT SIZE=-1><B>EXPANSION</B>
+
+</FONT>
+above) but after history expansion is performed, subject to the
+values of the shell variables
+<FONT SIZE=-1><B>HISTIGNORE</B>
+
+</FONT>
+and
+<FONT SIZE=-1><B>HISTCONTROL</B>.
+
+</FONT>
+<P>
+
+On startup, the history is initialized from the file named by
+the variable
+<FONT SIZE=-1><B>HISTFILE</B>
+
+</FONT>
+(default <A HREF="file:~/.bash_history"><I>~/.bash_history</I></A>).
+The file named by the value of
+<FONT SIZE=-1><B>HISTFILE</B>
+
+</FONT>
+is truncated, if necessary, to contain no more than
+the number of lines specified by the value of
+<FONT SIZE=-1><B>HISTFILESIZE</B>.
+
+</FONT>
+If <B>HISTFILESIZE</B> is unset, or set to null, a non-numeric value,
+or a numeric value less than zero, the history file is not truncated.
+When the history file is read,
+lines beginning with the history comment character followed immediately
+by a digit are interpreted as timestamps for the following history line.
+These timestamps are optionally displayed depending on the value of the
+<FONT SIZE=-1><B>HISTTIMEFORMAT</B>
+
+</FONT>
+variable.
+When a shell with history enabled exits, the last
+<FONT SIZE=-1><B>$HISTSIZE</B>
+
+</FONT>
+lines are copied from the history list to
+<FONT SIZE=-1><B>$HISTFILE</B>.
+
+</FONT>
+If the
+<B>histappend</B>
+
+shell option is enabled
+(see the description of
+<B>shopt</B>
+
+under
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>
+
+</FONT>
+below), the lines are appended to the history file,
+otherwise the history file is overwritten.
+If
+<FONT SIZE=-1><B>HISTFILE</B>
+
+</FONT>
+is unset, or if the history file is unwritable, the history is
+not saved.
+If the
+<FONT SIZE=-1><B>HISTTIMEFORMAT</B>
+
+</FONT>
+variable is set, time stamps are written to the history file, marked
+with the history comment character, so
+they may be preserved across shell sessions.
+This uses the history comment character to distinguish timestamps from
+other history lines.
+After saving the history, the history file is truncated
+to contain no more than
+<FONT SIZE=-1><B>HISTFILESIZE</B>
+
+</FONT>
+lines.  If
+<FONT SIZE=-1><B>HISTFILESIZE</B>
+
+</FONT>
+is unset, or set to null, a non-numeric value,
+or a numeric value less than zero, the history file is not truncated.
+<P>
+
+The builtin command
+<B>fc</B>
+
+(see
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>
+
+</FONT>
+below) may be used to list or edit and re-execute a portion of
+the history list.
+The
+<B>history</B>
+
+builtin may be used to display or modify the history list and
+manipulate the history file.
+When using command-line editing, search commands
+are available in each editing mode that provide access to the
+history list.
+<P>
+
+The shell allows control over which commands are saved on the history
+list.  The
+<FONT SIZE=-1><B>HISTCONTROL</B>
+
+</FONT>
+and
+<FONT SIZE=-1><B>HISTIGNORE</B>
+
+</FONT>
+variables may be set to cause the shell to save only a subset of the
+commands entered.
+The
+<B>cmdhist</B>
+
+shell option, if enabled, causes the shell to attempt to save each
+line of a multi-line command in the same history entry, adding
+semicolons where necessary to preserve syntactic correctness.
+The
+<B>lithist</B>
+
+shell option causes the shell to save the command with embedded newlines
+instead of semicolons.  See the description of the
+<B>shopt</B>
+
+builtin below under
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>
+
+</FONT>
+for information on setting and unsetting shell options.
+<A NAME="lbCX">&nbsp;</A>
+<H3>HISTORY EXPANSION</H3>
+
+The shell supports a history expansion feature that
+is similar to the history expansion in
+<B>csh</B>.
+
+This section describes what syntax features are available.  This
+feature is enabled by default for interactive shells, and can be
+disabled using the
+<B>+H</B>
+
+option to the
+<B>set</B>
+
+builtin command (see
+<FONT SIZE=-1><B>SHELL BUILTIN COMMANDS</B>
+
+</FONT>
+below).  Non-interactive shells do not perform history expansion
+by default.
+<P>
+
+History expansions introduce words from the history list into
+the input stream, making it easy to repeat commands, insert the
+arguments to a previous command into the current input line, or
+fix errors in previous commands quickly.
+<P>
+
+History expansion is performed immediately after a complete line
+is read, before the shell breaks it into words, and is performed
+on each line individually without taking quoting on previous lines into
+account.
+It takes place in two parts.
+The first is to determine which line from the history list
+to use during substitution.
+The second is to select portions of that line for inclusion into
+the current one.
+The line selected from the history is the <I>event</I>,
+and the portions of that line that are acted upon are <I>words</I>.
+Various <I>modifiers</I> are available to manipulate the selected words.
+The line is broken into words in the same fashion as when reading input,
+so that several <I>metacharacter</I>-separated words surrounded by
+quotes are considered one word.
+History expansions are introduced by the appearance of the
+history expansion character, which is <B>!</B> by default.
+Only backslash (<B>\</B>) and single quotes can quote
+the history expansion character, but the history expansion character is
+also treated as quoted if it immediately precedes the closing double quote
+in a double-quoted string.
+<P>
+
+Several characters inhibit history expansion if found immediately
+following the history expansion character, even if it is unquoted:
+space, tab, newline, carriage return, and <B>=</B>.
+If the <B>extglob</B> shell option is enabled, <B>(</B> will also
+inhibit expansion.
+<P>
+
+Several shell options settable with the
+<B>shopt</B>
+
+builtin may be used to tailor the behavior of history expansion.
+If the
+<B>histverify</B>
+
+shell option is enabled (see the description of the
+<B>shopt</B>
+
+builtin below), and
+<B>readline</B>
+
+is being used, history substitutions are not immediately passed to
+the shell parser.
+Instead, the expanded line is reloaded into the
+<B>readline</B>
+
+editing buffer for further modification.
+If
+<B>readline</B>
+
+is being used, and the
+<B>histreedit</B>
+
+shell option is enabled, a failed history substitution will be reloaded
+into the
+<B>readline</B>
+
+editing buffer for correction.
+The
+<B>-p</B>
+
+option to the
+<B>history</B>
+
+builtin command may be used to see what a history expansion will
+do before using it.
+The
+<B>-s</B>
+
+option to the
+<B>history</B>
+
+builtin may be used to add commands to the end of the history list
+without actually executing them, so that they are available for
+subsequent recall.
+<P>
+
+The shell allows control of the various characters used by the
+history expansion mechanism (see the description of
+<B>histchars</B>
+
+above under
+<B>Shell Variables</B>).
+
+The shell uses
+the history comment character to mark history timestamps when
+writing the history file.
+<A NAME="lbCY">&nbsp;</A>
+<H4>Event Designators</H4>
+
+An event designator is a reference to a command line entry in the
+history list.
+Unless the reference is absolute, events are relative to the current
+position in the history list.
+<P>
+
+
+<DL COMPACT>
+<DT><B>!</B>
+
+<DD>
+Start a history substitution, except when followed by a
+<B>blank</B>,
+
+newline, carriage return, =
+or ( (when the <B>extglob</B> shell option is enabled using
+the <B>shopt</B> builtin).
+<DT><B>!</B><I>n</I>
+
+<DD>
+Refer to command line
+<I>n</I>.
+
+<DT><B>!-</B><I>n</I>
+
+<DD>
+Refer to the current command minus
+<I>n</I>.
+
+<DT><B>!!</B>
+
+<DD>
+Refer to the previous command.  This is a synonym for `!-1'.
+<DT><B>!</B><I>string</I>
+
+<DD>
+Refer to the most recent command preceding the current position in the
+history list starting with
+<I>string</I>.
+
+<DT><B>!?</B><I>string</I><B>[?]</B>
+
+<DD>
+Refer to the most recent command preceding the current position in the
+history list containing
+<I>string</I>.
+
+The trailing <B>?</B> may be omitted if
+<I>string</I>
+
+is followed immediately by a newline.
+If <I>string</I> is missing, the string from the most recent search is used;
+it is an error if there is no previous search string.
+<DT><B></B><FONT SIZE=+2><B>^</B></FONT><B></B><I>string1</I><FONT SIZE=+2>^</FONT><I>string2</I><FONT SIZE=+2>^</FONT>
+
+<DD>
+Quick substitution.  Repeat the previous command, replacing
+<I>string1</I>
+
+with
+<I>string2</I>.
+
+Equivalent to
+``!!:s<FONT SIZE=+2>^</FONT><I>string1</I><FONT SIZE=+2>^</FONT><I>string2</I><FONT SIZE=+2>^</FONT>''
+(see <B>Modifiers</B> below).
+<DT><B>!#</B>
+
+<DD>
+The entire command line typed so far.
+
+</DL>
+<A NAME="lbCZ">&nbsp;</A>
+<H4>Word Designators</H4>
+
+Word designators are used to select desired words from the event.
+A
+<B>:</B>
+
+separates the event specification from the word designator.
+It may be omitted if the word designator begins with a
+<B>^</B>,
+
+<B>$</B>,
+
+<B>*</B>,
+
+<B>-</B>,
+
+or
+<B>%</B>.
+
+Words are numbered from the beginning of the line,
+with the first word being denoted by 0 (zero).
+Words are inserted into the current line separated by single spaces.
+<P>
+
+
+<DL COMPACT>
+<DT><B>0 (zero)</B>
+
+<DD>
+The zeroth word.  For the shell, this is the command
+word.
+<DT><I>n</I>
+
+<DD>
+The <I>n</I>th word.
+<DT><B>^</B>
+
+<DD>
+The first argument.  That is, word 1.
+<DT><B>$</B>
+
+<DD>
+The last word.  This is usually the last argument, but will expand to the
+zeroth word if there is only one word in the line.
+<DT><B>%</B>
+
+<DD>
+The first word matched by the most recent `?<I>string</I>?' search,
+if the search string begins with a character that is part of a word.
+<DT><I>x</I><B>-</B>y
+
+<DD>
+A range of words; `-<I>y</I>' abbreviates `0-<I>y</I>'.
+<DT><B>*</B>
+
+<DD>
+All of the words but the zeroth.  This is a synonym
+for `<I>1-$</I>'.  It is not an error to use
+<B>*</B>
+
+if there is just one
+word in the event; the empty string is returned in that case.
+<DT><B>x*</B>
+
+<DD>
+Abbreviates <I>x-$</I>.
+<DT><B>x-</B>
+
+<DD>
+Abbreviates <I>x-$</I> like <B>x*</B>, but omits the last word.
+If <B>x</B> is missing, it defaults to 0.
+
+</DL>
+<P>
+
+If a word designator is supplied without an event specification, the
+previous command is used as the event.
+<A NAME="lbDA">&nbsp;</A>
+<H4>Modifiers</H4>
+
+After the optional word designator, there may appear a sequence of
+one or more of the following modifiers, each preceded by a `:'.
+These modify, or edit, the word or words selected from the history event.
+<P>
+
+
+<DL COMPACT>
+<DT><B>h</B>
+
+<DD>
+Remove a trailing filename component, leaving only the head.
+<DT><B>t</B>
+
+<DD>
+Remove all leading filename components, leaving the tail.
+<DT><B>r</B>
+
+<DD>
+Remove a trailing suffix of the form <I>.xxx</I>, leaving the
+basename.
+<DT><B>e</B>
+
+<DD>
+Remove all but the trailing suffix.
+<DT><B>p</B>
+
+<DD>
+Print the new command but do not execute it.
+<DT><B>q</B>
+
+<DD>
+Quote the substituted words, escaping further substitutions.
+<DT><B>x</B>
+
+<DD>
+Quote the substituted words as with
+<B>q</B>,
+
+but break into words at
+<B>blanks</B>
+
+and newlines.
+The <B>q</B> and <B>x</B> modifiers are mutually exclusive; the last one
+supplied is used.
+<DT><B>s/</B><I>old</I>/<I>new</I>/
+
+<DD>
+Substitute
+<I>new</I>
+
+for the first occurrence of
+<I>old</I>
+
+in the event line.
+Any character may be used as the delimiter in place of /.
+The final delimiter is optional if it is the last character of the
+event line.
+The delimiter may be quoted in
+<I>old</I>
+
+and
+<I>new</I>
+
+with a single backslash.  If &amp; appears in
+<I>new</I>,
+
+it is replaced by
+<I>old</I>.
+
+A single backslash will quote the &amp;.
+If
+<I>old</I>
+
+is null, it is set to the last
+<I>old</I>
+
+substituted, or, if no previous history substitutions took place,
+the last
+<I>string</I>
+
+in a
+<B>!?</B><I>string</I><B>[?]</B>
+
+search.
+If
+<I>new</I>
+
+is null, each matching
+<I>old</I>
+
+is deleted.
+<DT><B>&amp;</B>
+
+<DD>
+Repeat the previous substitution.
+<DT><B>g</B>
+
+<DD>
+Cause changes to be applied over the entire event line.  This is
+used in conjunction with `<B>:s</B>' (e.g., `<B>:gs/</B><I>old</I>/<I>new</I>/')
+or `<B>:&amp;</B>'.  If used with
+`<B>:s</B>', any delimiter can be used
+in place of /, and the final delimiter is optional
+if it is the last character of the event line.
+An <B>a</B> may be used as a synonym for <B>g</B>.
+<DT><B>G</B>
+
+<DD>
+Apply the following `<B>s</B>' or `<B>&amp;</B>' modifier once to each word
+in the event line.
+
+</DL>
+<A NAME="lbDB">&nbsp;</A>
+<H3>SHELL BUILTIN COMMANDS</H3>
+
+
+
+<P>
+
+Unless otherwise noted, each builtin command documented in this
+section as accepting options preceded by
+<B>-</B>
+
+accepts
+<B>--</B>
+
+to signify the end of the options.
+The <B>:</B>, <B>true</B>, <B>false</B>, and <B>test</B>/<B>[</B> builtins
+do not accept options and do not treat <B>--</B> specially.
+The <B>exit</B>, <B>logout</B>, <B>return</B>,
+<B>break</B>, <B>continue</B>, <B>let</B>,
+and <B>shift</B> builtins accept and process arguments beginning with
+<B>-</B> without requiring <B>--</B>.
+Other builtins that accept arguments but are not specified as accepting
+options interpret arguments beginning with <B>-</B> as invalid options and
+require <B>--</B> to prevent this interpretation.
+<P>
+
+<DL COMPACT>
+<DT><B>:</B> [<I>arguments</I>]<DD>
+
+No effect; the command does nothing beyond expanding
+<I>arguments</I>
+
+and performing any specified
+redirections.
+The return status is zero.
+<DT><B> . </B> <I>filename</I> [<I>arguments</I>]<DD>
+
+<DT><B>source</B> <I>filename</I> [<I>arguments</I>]<DD>
+
+Read and execute commands from
+<I>filename</I>
+
+in the current
+shell environment and return the exit status of the last command
+executed from
+<I>filename</I>.
+
+If
+<I>filename</I>
+
+does not contain a slash, filenames in
+<FONT SIZE=-1><B>PATH</B>
+
+</FONT>
+are used to find the directory containing
+<I>filename</I>.
+
+The file searched for in
+<FONT SIZE=-1><B>PATH</B>
+
+</FONT>
+need not be executable.
+When <B>bash</B> is not in <I>posix mode</I>, the current directory is
+searched if no file is found in
+<FONT SIZE=-1><B>PATH</B>.
+
+</FONT>
+If the
+<B>sourcepath</B>
+
+option to the
+<B>shopt</B>
+
+builtin command is turned off, the
+<FONT SIZE=-1><B>PATH</B>
+
+</FONT>
+is not searched.
+If any <I>arguments</I> are supplied, they become the positional
+parameters when <I>filename</I> is executed.  Otherwise the positional
+parameters are unchanged.
+If the <B>-T</B> option is enabled, <B>source</B> inherits any trap on
+<B>DEBUG</B>; if it is not, any <B>DEBUG</B> trap string is saved and
+restored around the call to <B>source</B>, and <B>source</B> unsets the
+<B>DEBUG</B> trap while it executes.
+If <B>-T</B> is not set, and the sourced file changes
+the <B>DEBUG</B> trap, the new value is retained when <B>source</B> completes.
+The return status is the status of the last command exited within
+the script (0 if no commands are executed), and false if
+<I>filename</I>
+
+is not found or cannot be read.
+<DT><B>alias</B> [<B>-p</B>] [<I>name</I>[=<I>value</I>] ...]<DD>
+<B>Alias</B> with no arguments or with the
+<B>-p</B>
+
+option prints the list of aliases in the form
+<B>alias</B> <I>name</I>=<I>value</I> on standard output.
+When arguments are supplied, an alias is defined for
+each <I>name</I> whose <I>value</I> is given.
+A trailing space in <I>value</I> causes the next word to be
+checked for alias substitution when the alias is expanded.
+For each <I>name</I> in the argument list for which no <I>value</I>
+is supplied, the name and value of the alias is printed.
+<B>Alias</B> returns true unless a <I>name</I> is given for which
+no alias has been defined.
+<DT><B>bg</B> [<I>jobspec</I> ...]<DD>
+Resume each suspended job <I>jobspec</I> in the background, as if it
+had been started with
+<B>&amp;</B>.
+
+If
+<I>jobspec</I>
+
+is not present, the shell's notion of the <I>current job</I> is used.
+<B>bg</B>
+
+<I>jobspec</I>
+
+returns 0 unless run when job control is disabled or, when run with
+job control enabled, any specified <I>jobspec</I> was not found
+or was started without job control.
+<DT><B>bind</B> [<B>-m</B> <I>keymap</I>] [<B>-lpsvPSVX</B>]<DD>
+
+<DT><B>bind</B> [<B>-m</B> <I>keymap</I>] [<B>-q</B> <I>function</I>] [<B>-u</B> <I>function</I>] [<B>-r</B> <I>keyseq</I>]<DD>
+<DT><B>bind</B> [<B>-m</B> <I>keymap</I>] <B>-f</B> <I>filename</I><DD>
+<DT><B>bind</B> [<B>-m</B> <I>keymap</I>] <B>-x</B> <I>keyseq</I>:<I>shell-command</I><DD>
+<DT><B>bind</B> [<B>-m</B> <I>keymap</I>] <I>keyseq</I>:<I>function-name</I><DD>
+<DT><B>bind</B> [<B>-m</B> <I>keymap</I>] <I>keyseq</I>:<I>readline-command</I><DD>
+
+Display current
+<B>readline</B>
+
+key and function bindings, bind a key sequence to a
+<B>readline</B>
+
+function or macro, or set a
+<B>readline</B>
+
+variable.
+Each non-option argument is a command as it would appear in
+<I>.inputrc</I>,
+
+but each binding or command must be passed as a separate argument;
+e.g., '&quot;\C-x\C-r&quot;: re-read-init-file'.
+Options, if supplied, have the following meanings:
+<DL COMPACT><DT><DD>
+
+<DL COMPACT>
+<DT><B>-m </B><I>keymap</I>
+
+<DD>
+Use
+<I>keymap</I>
+
+as the keymap to be affected by the subsequent bindings.
+Acceptable
+<I>keymap</I>
+
+names are
+<I>emacs, emacs-standard, emacs-meta, emacs-ctlx, vi,
+vi-move, vi-command</I>, and
+<I>vi-insert</I>.
+
+<I>vi</I> is equivalent to <I>vi-command</I> (<I>vi-move</I> is also
+a synonym); <I>emacs</I> is
+equivalent to <I>emacs-standard</I>.
+<DT><B>-l</B>
+
+<DD>
+List the names of all <B>readline</B> functions.
+<DT><B>-p</B>
+
+<DD>
+Display <B>readline</B> function names and bindings in such a way
+that they can be re-read.
+<DT><B>-P</B>
+
+<DD>
+List current <B>readline</B> function names and bindings.
+<DT><B>-s</B>
+
+<DD>
+Display <B>readline</B> key sequences bound to macros and the strings
+they output in such a way that they can be re-read.
+<DT><B>-S</B>
+
+<DD>
+Display <B>readline</B> key sequences bound to macros and the strings
+they output.
+<DT><B>-v</B>
+
+<DD>
+Display <B>readline</B> variable names and values in such a way that they
+can be re-read.
+<DT><B>-V</B>
+
+<DD>
+List current <B>readline</B> variable names and values.
+<DT><B>-f </B><I>filename</I>
+
+<DD>
+Read key bindings from <I>filename</I>.
+<DT><B>-q </B><I>function</I>
+
+<DD>
+Query about which keys invoke the named <I>function</I>.
+<DT><B>-u </B><I>function</I>
+
+<DD>
+Unbind all keys bound to the named <I>function</I>.
+<DT><B>-r </B><I>keyseq</I>
+
+<DD>
+Remove any current binding for <I>keyseq</I>.
+<DT><B>-x </B><I>keyseq</I>:<I>shell-command</I>
+
+<DD>
+Cause <I>shell-command</I> to be executed whenever <I>keyseq</I> is
+entered.
+When <I>shell-command</I> is executed, the shell sets the
+<FONT SIZE=-1><B>READLINE_LINE</B>
+
+</FONT>
+variable to the contents of the <B>readline</B> line buffer and the
+<FONT SIZE=-1><B>READLINE_POINT</B>
+
+</FONT>
+and
+<FONT SIZE=-1><B>READLINE_MARK</B>
+
+</FONT>
+variables to the current location of the insertion point and the saved
+insertion point (the mark), respectively.
+If the executed command changes the value of any of
+<FONT SIZE=-1><B>READLINE_LINE</B>,
+
+</FONT>
+<FONT SIZE=-1><B>READLINE_POINT</B>,
+
+</FONT>
+or
+<FONT SIZE=-1><B>READLINE_MARK</B>,
+
+</FONT>
+those new values will be reflected in the editing state.
+<DT><B>-X</B>
+
+<DD>
+List all key sequences bound to shell commands and the associated commands
+in a format that can be reused as input.
+
+</DL>
+<P>
+
+The return value is 0 unless an unrecognized option is given or an
+error occurred.
+</DL>
+
+<DT><B>break</B> [<I>n</I>]<DD>
+Exit from within a
+<B>for</B>,
+
+<B>while</B>,
+
+<B>until</B>,
+
+or
+<B>select</B>
+
+loop.  If <I>n</I> is specified, break <I>n</I> levels.
+<I>n</I>
+
+must be >= 1.  If
+<I>n</I>
+
+is greater than the number of enclosing loops, all enclosing loops
+are exited.
+The return value is 0 unless <I>n</I> is not greater than or equal to 1.
+<DT><B>builtin</B> <I>shell-builtin</I> [<I>arguments</I>]<DD>
+Execute the specified shell builtin, passing it
+<I>arguments</I>,
+
+and return its exit status.
+This is useful when defining a
+function whose name is the same as a shell builtin,
+retaining the functionality of the builtin within the function.
+The <B>cd</B> builtin is commonly redefined this way.
+The return status is false if
+<I>shell-builtin</I>
+
+is not a shell builtin command.
+<DT><B>caller</B> [<I>expr</I>]<DD>
+Returns the context of any active subroutine call (a shell function or
+a script executed with the <B>.</B> or <B>source</B> builtins).
+Without <I>expr</I>, <B>caller</B> displays the line number and source
+filename of the current subroutine call.
+If a non-negative integer is supplied as <I>expr</I>, <B>caller</B>
+displays the line number, subroutine name, and source file corresponding
+to that position in the current execution call stack.  This extra
+information may be used, for example, to print a stack trace.  The
+current frame is frame 0.
+The return value is 0 unless the shell is not executing a subroutine
+call or <I>expr</I> does not correspond to a valid position in the
+call stack.
+<DT><B>cd</B> [<B>-L</B>|[<B>-P</B> [<B>-e</B>]] [-@]] [<I>dir</I>]<DD>
+Change the current directory to <I>dir</I>.
+if <I>dir</I> is not supplied, the value of the
+<FONT SIZE=-1><B>HOME</B>
+
+</FONT>
+shell variable is the default.
+Any additional arguments following <I>dir</I> are ignored.
+The variable
+<FONT SIZE=-1><B>CDPATH</B>
+
+</FONT>
+defines the search path for the directory containing
+<I>dir</I>:
+
+each directory name in
+<FONT SIZE=-1><B>CDPATH</B>
+
+</FONT>
+is searched for <I>dir</I>.
+Alternative directory names in
+<FONT SIZE=-1><B>CDPATH</B>
+
+</FONT>
+are separated by a colon (:).  A null directory name in
+<FONT SIZE=-1><B>CDPATH</B>
+
+</FONT>
+is the same as the current directory, i.e., ``<B>.</B>''.  If
+<I>dir</I>
+
+begins with a slash (/),
+then
+<FONT SIZE=-1><B>CDPATH</B>
+
+</FONT>
+is not used.  The
+<B>-P</B>
+
+option causes <B>cd</B> to use the physical directory structure
+by resolving symbolic links while traversing <I>dir</I> and
+before processing instances of <I>..</I> in <I>dir</I> (see also the
+<B>-P</B>
+
+option to the
+<B>set</B>
+
+builtin command); the
+<B>-L</B>
+
+option forces symbolic links to be followed by resolving the link
+after processing instances of <I>..</I> in <I>dir</I>.
+If <I>..</I> appears in <I>dir</I>, it is processed by removing the
+immediately previous pathname component from <I>dir</I>, back to a slash
+or the beginning of <I>dir</I>.
+If the
+<B>-e</B>
+
+option is supplied with
+<B>-P</B>,
+
+and the current working directory cannot be successfully determined
+after a successful directory change, <B>cd</B> will return an unsuccessful
+status.
+On systems that support it, the <B>-@</B> option presents the extended
+attributes associated with a file as a directory.
+An argument of
+<B>-</B>
+
+is converted to
+<FONT SIZE=-1><B>$OLDPWD</B>
+
+</FONT>
+before the directory change is attempted.
+If a non-empty directory name from
+<FONT SIZE=-1><B>CDPATH</B>
+
+</FONT>
+is used, or if
+<B>-</B> is the first argument, and the directory change is
+successful, the absolute pathname of the new working directory is
+written to the standard output.
+The return value is true if the directory was successfully changed;
+false otherwise.
+<DT><B>command</B> [<B>-pVv</B>] <I>command</I> [<I>arg</I> ...]<DD>
+Run
+<I>command</I>
+
+with
+<I>args</I>
+
+suppressing the normal shell function lookup.
+Only builtin commands or commands found in the
+<FONT SIZE=-1><B>PATH</B>
+
+</FONT>
+are executed.  If the
+<B>-p</B>
+
+option is given, the search for
+<I>command</I>
+
+is performed using a default value for
+<FONT SIZE=-1><B>PATH</B>
+
+</FONT>
+that is guaranteed to find all of the standard utilities.
+If either the
+<B>-V</B>
+
+or
+<B>-v</B>
+
+option is supplied, a description of
+<I>command</I>
+
+is printed.  The
+<B>-v</B>
+
+option causes a single word indicating the command or filename
+used to invoke
+<I>command</I>
+
+to be displayed; the
+<B>-V</B>
+
+option produces a more verbose description.
+If the
+<B>-V</B>
+
+or
+<B>-v</B>
+
+option is supplied, the exit status is 0 if
+<I>command</I>
+
+was found, and 1 if not.  If neither option is supplied and
+an error occurred or
+<I>command</I>
+
+cannot be found, the exit status is 127.  Otherwise, the exit status of the
+<B>command</B>
+
+builtin is the exit status of
+<I>command</I>.
+
+<DT><B>compgen</B> [<I>option</I>] [<I>word</I>]<DD>
+Generate possible completion matches for <I>word</I> according to
+the <I>option</I>s, which may be any option accepted by the
+<B>complete</B>
+
+builtin with the exception of <B>-p</B> and <B>-r</B>, and write
+the matches to the standard output.
+When using the <B>-F</B> or <B>-C</B> options, the various shell variables
+set by the programmable completion facilities, while available, will not
+have useful values.
+<P>
+The matches will be generated in the same way as if the programmable
+completion code had generated them directly from a completion specification
+with the same flags.
+If <I>word</I> is specified, only those completions matching <I>word</I>
+will be displayed.
+<P>
+The return value is true unless an invalid option is supplied, or no
+matches were generated.
+<DT><B>complete</B> [<B>-abcdefgjksuv</B>] [<B>-o</B> <I>comp-option</I>] [<B>-DEI</B>] [<B>-A</B> <I>action</I>] [<B>-G</B> <I>globpat</I>] [<B>-W</B> <I>wordlist</I>]<DD>
+<BR>
+
+[<B>-F</B> <I>function</I>] [<B>-C</B> <I>command</I>] [<B>-X</B> <I>filterpat</I>] [<B>-P</B> <I>prefix</I>] [<B>-S</B> <I>suffix</I>] <I>name</I> [<I>name ...</I>]
+
+<DT><B>complete</B> <B>-pr</B> [<B>-DEI</B>] [<I>name</I> ...]<DD>
+
+Specify how arguments to each <I>name</I> should be completed.
+If the <B>-p</B> option is supplied, or if no options are supplied,
+existing completion specifications are printed in a way that allows
+them to be reused as input.
+The <B>-r</B> option removes a completion specification for
+each <I>name</I>, or, if no <I>name</I>s are supplied, all
+completion specifications.
+The <B>-D</B> option indicates that other supplied options and actions should
+apply to the ``default'' command completion; that is, completion attempted
+on a command for which no completion has previously been defined.
+The <B>-E</B> option indicates that other supplied options and actions should
+apply to ``empty'' command completion; that is, completion attempted on a
+blank line.
+The <B>-I</B> option indicates that other supplied options and actions should
+apply to completion on the initial non-assignment word on the line, or after
+a command delimiter such as <B>;</B> or <B>|</B>, which is usually command
+name completion.
+If multiple options are supplied, the <B>-D</B> option takes precedence
+over <B>-E</B>, and both take precedence over <B>-I</B>.
+If any of <B>-D</B>, <B>-E</B>, or <B>-I</B> are supplied, any other
+<I>name</I> arguments are ignored; these completions only apply to the case
+specified by the option.
+<P>
+The process of applying these completion specifications when word completion
+is attempted is described above under <B>Programmable Completion</B>.
+<P>
+Other options, if specified, have the following meanings.
+The arguments to the <B>-G</B>, <B>-W</B>, and <B>-X</B> options
+(and, if necessary, the <B>-P</B> and <B>-S</B> options)
+should be quoted to protect them from expansion before the
+<B>complete</B>
+
+builtin is invoked.
+<DL COMPACT><DT><DD>
+
+<DL COMPACT>
+<DT><B>-o</B> <I>comp-option</I><DD>
+The <I>comp-option</I> controls several aspects of the compspec's behavior
+beyond the simple generation of completions.
+<I>comp-option</I> may be one of:
+<DL COMPACT><DT><DD>
+<DL COMPACT>
+<DT><B>bashdefault</B>
+
+<DD>
+Perform the rest of the default <B>bash</B> completions if the compspec
+generates no matches.
+<DT><B>default</B>
+
+<DD>
+Use readline's default filename completion if the compspec generates
+no matches.
+<DT><B>dirnames</B>
+
+<DD>
+Perform directory name completion if the compspec generates no matches.
+<DT><B>filenames</B>
+
+<DD>
+Tell readline that the compspec generates filenames, so it can perform any
+filename-specific processing (like adding a slash to directory names,
+quoting special characters, or suppressing trailing spaces).
+Intended to be used with shell functions.
+<DT><B>noquote</B>
+
+<DD>
+Tell readline not to quote the completed words if they are filenames
+(quoting filenames is the default).
+<DT><B>nosort</B>
+
+<DD>
+Tell readline not to sort the list of possible completions alphabetically.
+<DT><B>nospace</B>
+
+<DD>
+Tell readline not to append a space (the default) to words completed at
+the end of the line.
+<DT><B>plusdirs</B>
+
+<DD>
+After any matches defined by the compspec are generated,
+directory name completion is attempted and any
+matches are added to the results of the other actions.
+</DL></DL>
+
+<DT><B>-A</B> <I>action</I><DD>
+The <I>action</I> may be one of the following to generate a list of possible
+completions:
+<DL COMPACT><DT><DD>
+<DL COMPACT>
+<DT><B>alias</B>
+
+<DD>
+Alias names.  May also be specified as <B>-a</B>.
+<DT><B>arrayvar</B>
+
+<DD>
+Array variable names.
+<DT><B>binding</B>
+
+<DD>
+<B>Readline</B> key binding names.
+<DT><B>builtin</B>
+
+<DD>
+Names of shell builtin commands.  May also be specified as <B>-b</B>.
+<DT><B>command</B>
+
+<DD>
+Command names.  May also be specified as <B>-c</B>.
+<DT><B>directory</B>
+
+<DD>
+Directory names.  May also be specified as <B>-d</B>.
+<DT><B>disabled</B>
+
+<DD>
+Names of disabled shell builtins.
+<DT><B>enabled</B>
+
+<DD>
+Names of enabled shell builtins.
+<DT><B>export</B>
+
+<DD>
+Names of exported shell variables.  May also be specified as <B>-e</B>.
+<DT><B>file</B>
+
+<DD>
+File names.  May also be specified as <B>-f</B>.
+<DT><B>function</B>
+
+<DD>
+Names of shell functions.
+<DT><B>group</B>
+
+<DD>
+Group names.  May also be specified as <B>-g</B>.
+<DT><B>helptopic</B>
+
+<DD>
+Help topics as accepted by the <B>help</B> builtin.
+<DT><B>hostname</B>
+
+<DD>
+Hostnames, as taken from the file specified by the
+<FONT SIZE=-1><B>HOSTFILE</B>
+
+</FONT>
+shell variable.
+<DT><B>job</B>
+
+<DD>
+Job names, if job control is active.  May also be specified as <B>-j</B>.
+<DT><B>keyword</B>
+
+<DD>
+Shell reserved words.  May also be specified as <B>-k</B>.
+<DT><B>running</B>
+
+<DD>
+Names of running jobs, if job control is active.
+<DT><B>service</B>
+
+<DD>
+Service names.  May also be specified as <B>-s</B>.
+<DT><B>setopt</B>
+
+<DD>
+Valid arguments for the <B>-o</B> option to the <B>set</B> builtin.
+<DT><B>shopt</B>
+
+<DD>
+Shell option names as accepted by the <B>shopt</B> builtin.
+<DT><B>signal</B>
+
+<DD>
+Signal names.
+<DT><B>stopped</B>
+
+<DD>
+Names of stopped jobs, if job control is active.
+<DT><B>user</B>
+
+<DD>
+User names.  May also be specified as <B>-u</B>.
+<DT><B>variable</B>
+
+<DD>
+Names of all shell variables.  May also be specified as <B>-v</B>.
+</DL></DL>
+
+<DT><B>-C</B> <I>command</I><DD>
+<I>command</I> is executed in a subshell environment, and its output is
+used as the possible completions.
+<DT><B>-F</B> <I>function</I><DD>
+The shell function <I>function</I> is executed in the current shell
+environment.
+When the function is executed,
+the first argument (<B>$1</B>) is the name of the command whose arguments are
+being completed,
+the second argument (<B>$2</B>) is the word being completed,
+and the third argument (<B>$3</B>) is the word preceding the word being
+completed on the current command line.
+When it finishes, the possible completions are retrieved from the value
+of the
+<FONT SIZE=-1><B>COMPREPLY</B>
+
+</FONT>
+array variable.
+<DT><B>-G</B> <I>globpat</I><DD>
+The pathname expansion pattern <I>globpat</I> is expanded to generate
+the possible completions.
+<DT><B>-P</B> <I>prefix</I><DD>
+<I>prefix</I> is added at the beginning of each possible completion
+after all other options have been applied.
+<DT><B>-S</B> <I>suffix</I><DD>
+<I>suffix</I> is appended to each possible completion
+after all other options have been applied.
+<DT><B>-W</B> <I>wordlist</I><DD>
+The <I>wordlist</I> is split using the characters in the
+<FONT SIZE=-1><B>IFS</B>
+
+</FONT>
+special variable as delimiters, and each resultant word is expanded.
+Shell quoting is honored within <I>wordlist</I>,
+in order to provide a
+mechanism for the words to contain shell metacharacters or characters
+in the value of
+<FONT SIZE=-1><B>IFS</B>.
+
+</FONT>
+The possible completions are the members of the resultant list which
+match the word being completed.
+<DT><B>-X</B> <I>filterpat</I><DD>
+<I>filterpat</I> is a pattern as used for pathname expansion.
+It is applied to the list of possible completions generated by the
+preceding options and arguments, and each completion matching
+<I>filterpat</I> is removed from the list.
+A leading <B>!</B> in <I>filterpat</I> negates the pattern; in this
+case, any completion not matching <I>filterpat</I> is removed.
+
+</DL>
+<P>
+
+The return value is true unless an invalid option is supplied, an option
+other than <B>-p</B> or <B>-r</B> is supplied without a <I>name</I>
+argument, an attempt is made to remove a completion specification for
+a <I>name</I> for which no specification exists, or
+an error occurs adding a completion specification.
+</DL>
+
+<DT><B>compopt</B> [<B>-o</B> <I>option</I>] [<B>-DEI</B>] [<B>+o</B> <I>option</I>] [<I>name</I>]<DD>
+Modify completion options for each <I>name</I> according to the
+<I>option</I>s, or for the
+currently-executing completion if no <I>name</I>s are supplied.
+If no <I>option</I>s are given, display the completion options for each
+<I>name</I> or the current completion.
+The possible values of <I>option</I> are those valid for the <B>complete</B>
+builtin described above.
+The <B>-D</B> option indicates that other supplied options should
+apply to the ``default'' command completion; that is, completion attempted
+on a command for which no completion has previously been defined.
+The <B>-E</B> option indicates that other supplied options should
+apply to ``empty'' command completion; that is, completion attempted on a
+blank line.
+The <B>-I</B> option indicates that other supplied options should
+apply to completion on the initial non-assignment word on the line,
+or after a command delimiter such as <B>;</B> or <B>|</B>, which is usually
+command name completion.
+<P>
+The return value is true unless an invalid option is supplied, an attempt
+is made to modify the options for a <I>name</I> for which no completion
+specification exists, or an output error occurs.
+<DT><B>continue</B> [<I>n</I>]<DD>
+Resume the next iteration of the enclosing
+<B>for</B>,
+
+<B>while</B>,
+
+<B>until</B>,
+
+or
+<B>select</B>
+
+loop.
+If
+<I>n</I>
+
+is specified, resume at the <I>n</I>th enclosing loop.
+<I>n</I>
+
+must be >= 1.  If
+<I>n</I>
+
+is greater than the number of enclosing loops, the last enclosing loop
+(the ``top-level'' loop) is resumed.
+The return value is 0 unless <I>n</I> is not greater than or equal to 1.
+<DT><B>declare</B> [<B>-aAfFgiIlnrtux</B>] [<B>-p</B>] [<I>name</I>[=<I>value</I>] ...]<DD>
+
+<DT><B>typeset</B> [<B>-aAfFgiIlnrtux</B>] [<B>-p</B>] [<I>name</I>[=<I>value</I>] ...]<DD>
+
+Declare variables and/or give them attributes.
+If no <I>name</I>s are given then display the values of variables.
+The
+<B>-p</B>
+
+option will display the attributes and values of each
+<I>name</I>.
+
+When
+<B>-p</B>
+
+is used with <I>name</I> arguments, additional options,
+other than <B>-f</B> and <B>-F</B>, are ignored.
+When
+<B>-p</B>
+
+is supplied without <I>name</I> arguments, it will display the attributes
+and values of all variables having the attributes specified by the
+additional options.
+If no other options are supplied with <B>-p</B>, <B>declare</B> will display
+the attributes and values of all shell variables.  The <B>-f</B> option
+will restrict the display to shell functions.
+The
+<B>-F</B>
+
+option inhibits the display of function definitions; only the
+function name and attributes are printed.
+If the <B>extdebug</B> shell option is enabled using <B>shopt</B>,
+the source file name and line number where each <I>name</I>
+is defined are displayed as well.  The
+<B>-F</B>
+
+option implies
+<B>-f</B>.
+
+The
+<B>-g</B>
+
+option forces variables to be created or modified at the global scope,
+even when <B>declare</B> is executed in a shell function.
+It is ignored in all other cases.
+The
+<B>-I</B>
+
+option causes local variables to inherit the attributes
+(except the <I>nameref</I> attribute) 
+and value of any existing variable with the same
+<I>name</I> at a surrounding scope.
+If there is no existing variable, the local variable is initially unset.
+The following options can
+be used to restrict output to variables with the specified attribute or
+to give variables attributes:
+<DL COMPACT><DT><DD>
+
+<DL COMPACT>
+<DT><B>-a</B>
+
+<DD>
+Each <I>name</I> is an indexed array variable (see
+<B>Arrays</B>
+
+above).
+<DT><B>-A</B>
+
+<DD>
+Each <I>name</I> is an associative array variable (see
+<B>Arrays</B>
+
+above).
+<DT><B>-f</B>
+
+<DD>
+Use function names only.
+<DT><B>-i</B>
+
+<DD>
+The variable is treated as an integer; arithmetic evaluation (see
+<FONT SIZE=-1><B>ARITHMETIC EVALUATION</B>
+
+</FONT>
+above) is performed when the variable is assigned a value.
+<DT><B>-l</B>
+
+<DD>
+When the variable is assigned a value, all upper-case characters are
+converted to lower-case.
+The upper-case attribute is disabled.
+<DT><B>-n</B>
+
+<DD>
+Give each <I>name</I> the <I>nameref</I> attribute, making
+it a name reference to another variable.
+That other variable is defined by the value of <I>name</I>.
+All references, assignments, and attribute modifications
+to <I>name</I>, except those using or changing the
+<B>-n</B> attribute itself, are performed on the variable referenced by
+<I>name</I>'s value.
+The nameref attribute cannot be applied to array variables.
+<DT><B>-r</B>
+
+<DD>
+Make <I>name</I>s readonly.  These names cannot then be assigned values
+by subsequent assignment statements or unset.
+<DT><B>-t</B>
+
+<DD>
+Give each <I>name</I> the <I>trace</I> attribute.
+Traced functions inherit the <B>DEBUG</B> and <B>RETURN</B> traps from
+the calling shell.
+The trace attribute has no special meaning for variables.
+<DT><B>-u</B>
+
+<DD>
+When the variable is assigned a value, all lower-case characters are
+converted to upper-case.
+The lower-case attribute is disabled.
+<DT><B>-x</B>
+
+<DD>
+Mark <I>name</I>s for export to subsequent commands via the environment.
+
+</DL>
+<P>
+
+Using `+' instead of `-'
+turns off the attribute instead,
+with the exceptions that <B>+a</B> and <B>+A</B>
+may not be used to destroy array variables and <B>+r</B> will not
+remove the readonly attribute.
+When used in a function,
+<B>declare</B>
+
+and
+<B>typeset</B>
+
+make each
+<I>name</I> local, as with the
+<B>local</B>
+
+command,
+unless the <B>-g</B> option is supplied.
+If a variable name is followed by =<I>value</I>, the value of
+the variable is set to <I>value</I>.
+When using <B>-a</B> or <B>-A</B> and the compound assignment syntax to
+create array variables, additional attributes do not take effect until
+subsequent assignments.
+The return value is 0 unless an invalid option is encountered,
+an attempt is made to define a function using
+
+<TT>-f foo=bar</TT>,
+an attempt is made to assign a value to a readonly variable,
+an attempt is made to assign a value to an array variable without
+using the compound assignment syntax (see
+<B>Arrays</B>
+
+above), one of the <I>names</I> is not a valid shell variable name,
+an attempt is made to turn off readonly status for a readonly variable,
+an attempt is made to turn off array status for an array variable,
+or an attempt is made to display a non-existent function with <B>-f</B>.
+</DL>
+
+<DT><B>dirs [-clpv</B>] [+<I>n</I>] [-<I>n</I>]
+
+<DD>
+Without options, displays the list of currently remembered directories.
+The default display is on a single line with directory names separated
+by spaces.
+Directories are added to the list with the
+<B>pushd</B>
+
+command; the
+<B>popd</B>
+
+command removes entries from the list.
+The current directory is always the first directory in the stack.
+<DL COMPACT><DT><DD>
+
+<DL COMPACT>
+<DT><B>-c</B>
+
+<DD>
+Clears the directory stack by deleting all of the entries.
+<DT><B>-l</B>
+
+<DD>
+Produces a listing using full pathnames;
+the default listing format uses a tilde to denote the home directory.
+<DT><B>-p</B>
+
+<DD>
+Print the directory stack with one entry per line.
+<DT><B>-v</B>
+
+<DD>
+Print the directory stack with one entry per line,
+prefixing each entry with its index in the stack.
+<DT><B>+</B><I>n</I><DD>
+Displays the <I>n</I>th entry counting from the left of the list
+shown by
+<B>dirs</B>
+
+when invoked without options, starting with zero.
+<DT><B>-</B><I>n</I><DD>
+Displays the <I>n</I>th entry counting from the right of the list
+shown by
+<B>dirs</B>
+
+when invoked without options, starting with zero.
+
+</DL>
+<P>
+
+The return value is 0 unless an
+invalid option is supplied or <I>n</I> indexes beyond the end
+of the directory stack.
+</DL>
+
+<DT><B>disown</B> [<B>-ar</B>] [<B>-h</B>] [<I>jobspec</I> ... | <I>pid</I> ... ]<DD>
+Without options, remove each
+<I>jobspec</I>
+
+from the table of active jobs.
+If
+<I>jobspec</I>
+
+is not present, and neither the <B>-a</B> nor the <B>-r</B> option
+is supplied, the <I>current job</I> is used.
+If the <B>-h</B> option is given, each
+<I>jobspec</I>
+
+is not removed from the table, but is marked so that
+<FONT SIZE=-1><B>SIGHUP</B>
+
+</FONT>
+is not sent to the job if the shell receives a
+<FONT SIZE=-1><B>SIGHUP</B>.
+
+</FONT>
+If no
+<I>jobspec</I>
+
+is supplied, the
+<B>-a</B>
+
+option means to remove or mark all jobs; the
+<B>-r</B>
+
+option without a
+<I>jobspec</I>
+
+argument restricts operation to running jobs.
+The return value is 0 unless a
+<I>jobspec</I>
+
+does not specify a valid job.
+<DT><B>echo</B> [<B>-neE</B>] [<I>arg</I> ...]<DD>
+Output the <I>arg</I>s, separated by spaces, followed by a newline.
+The return status is 0 unless a write error occurs.
+If <B>-n</B> is specified, the trailing newline is
+suppressed.  If the <B>-e</B> option is given, interpretation of
+the following backslash-escaped characters is enabled.  The
+<B>-E</B>
+
+option disables the interpretation of these escape characters,
+even on systems where they are interpreted by default.
+The <B>xpg_echo</B> shell option may be used to
+dynamically determine whether or not <B>echo</B> expands these
+escape characters by default.
+<B>echo</B>
+
+does not interpret <B>--</B> to mean the end of options.
+<B>echo</B>
+
+interprets the following escape sequences:
+<DL COMPACT><DT><DD>
+
+<DL COMPACT>
+<DT><B>\a</B>
+
+<DD>
+alert (bell)
+<DT><B>\b</B>
+
+<DD>
+backspace
+<DT><B>\c</B>
+
+<DD>
+suppress further output
+<DT><B>\e</B>
+
+<DD>
+<DT><B>\E</B>
+
+<DD>
+an escape character
+<DT><B>\f</B>
+
+<DD>
+form feed
+<DT><B>\n</B>
+
+<DD>
+new line
+<DT><B>\r</B>
+
+<DD>
+carriage return
+<DT><B>\t</B>
+
+<DD>
+horizontal tab
+<DT><B>\v</B>
+
+<DD>
+vertical tab
+<DT><B>\\</B>
+
+<DD>
+backslash
+<DT><B>\0</B><I>nnn</I>
+
+<DD>
+the eight-bit character whose value is the octal value <I>nnn</I>
+(zero to three octal digits)
+<DT><B>\x</B><I>HH</I>
+
+<DD>
+the eight-bit character whose value is the hexadecimal value <I>HH</I>
+(one or two hex digits)
+<DT><B>\u</B><I>HHHH</I>
+
+<DD>
+the Unicode (ISO/IEC 10646) character whose value is the hexadecimal value
+<I>HHHH</I> (one to four hex digits)
+<DT><B>\U</B><I>HHHHHHHH</I>
+
+<DD>
+the Unicode (ISO/IEC 10646) character whose value is the hexadecimal value
+<I>HHHHHHHH</I> (one to eight hex digits)
+
+</DL></DL>
+
+<DT><B>enable</B> [<B>-a</B>] [<B>-dnps</B>] [<B>-f</B> <I>filename</I>] [<I>name</I> ...]<DD>
+Enable and disable builtin shell commands.
+Disabling a builtin allows a disk command which has the same name
+as a shell builtin to be executed without specifying a full pathname,
+even though the shell normally searches for builtins before disk commands.
+If <B>-n</B> is used, each <I>name</I>
+is disabled; otherwise,
+<I>names</I> are enabled.  For example, to use the
+<B>test</B>
+
+binary found via the
+<FONT SIZE=-1><B>PATH</B>
+
+</FONT>
+instead of the shell builtin version, run
+<TT>enable -n test</TT>.
+
+The
+<B>-f</B>
+
+option means to load the new builtin command
+<I>name</I>
+
+from shared object
+<I>filename</I>,
+
+on systems that support dynamic loading.  The
+<B>-d</B>
+
+option will delete a builtin previously loaded with
+<B>-f</B>.
+
+If no <I>name</I> arguments are given, or if the
+<B>-p</B>
+
+option is supplied, a list of shell builtins is printed.
+With no other option arguments, the list consists of all enabled
+shell builtins.
+If <B>-n</B> is supplied, only disabled builtins are printed.
+If <B>-a</B> is supplied, the list printed includes all builtins, with an
+indication of whether or not each is enabled.
+If <B>-s</B> is supplied, the output is restricted to the POSIX
+<I>special</I> builtins.
+The return value is 0 unless a
+<I>name</I>
+
+is not a shell builtin or there is an error loading a new builtin
+from a shared object.
+<DT><B>eval</B> [<I>arg</I> ...]<DD>
+The <I>arg</I>s are read and concatenated together into a single
+command.  This command is then read and executed by the shell, and
+its exit status is returned as the value of
+<B>eval</B>.
+
+If there are no
+<I>args</I>,
+
+or only null arguments,
+<B>eval</B>
+
+returns 0.
+<DT><B>exec</B> [<B>-cl</B>] [<B>-a</B> <I>name</I>] [<I>command</I> [<I>arguments</I>]]<DD>
+If
+<I>command</I>
+
+is specified, it replaces the shell.
+No new process is created.  The
+<I>arguments</I>
+
+become the arguments to <I>command</I>.
+If the
+<B>-l</B>
+
+option is supplied,
+the shell places a dash at the beginning of the zeroth argument passed to
+<I>command</I>.
+
+This is what
+<I>login</I>(1)
+
+does.  The
+<B>-c</B>
+
+option causes
+<I>command</I>
+
+to be executed with an empty environment.  If
+<B>-a</B>
+
+is supplied, the shell passes
+<I>name</I>
+
+as the zeroth argument to the executed command.
+If
+<I>command</I>
+
+cannot be executed for some reason, a non-interactive shell exits,
+unless the
+<B>execfail</B>
+
+shell option
+is enabled.  In that case, it returns failure.
+An interactive shell returns failure if the file cannot be executed.
+A subshell exits unconditionally if <B>exec</B> fails.
+If
+<I>command</I>
+
+is not specified, any redirections take effect in the current shell,
+and the return status is 0.  If there is a redirection error, the
+return status is 1.
+<DT><B>exit</B> [<I>n</I>]<DD>
+Cause the shell to exit
+with a status of <I>n</I>.  If
+<I>n</I>
+
+is omitted, the exit status
+is that of the last command executed.
+A trap on
+<FONT SIZE=-1><B>EXIT</B>
+
+</FONT>
+is executed before the shell terminates.
+<DT><B>export</B> [<B>-fn</B>] [<I>name</I>[=<I>word</I>]] ...<DD>
+
+<DT><B>export -p</B>
+
+<DD>
+
+The supplied
+<I>names</I>
+
+are marked for automatic export to the environment of
+subsequently executed commands.  If the
+<B>-f</B>
+
+option is given, the
+<I>names</I>
+
+refer to functions.
+If no
+<I>names</I>
+
+are given, or if the
+<B>-p</B>
+
+option is supplied, a list
+of names of all exported variables is printed.
+The
+<B>-n</B>
+
+option causes the export property to be removed from each
+<I>name</I>.
+If a variable name is followed by =<I>word</I>, the value of
+the variable is set to <I>word</I>.
+<B>export</B>
+
+returns an exit status of 0 unless an invalid option is
+encountered,
+one of the <I>names</I> is not a valid shell variable name, or
+<B>-f</B>
+
+is supplied with a
+<I>name</I>
+
+that is not a function.
+<DT><B>fc</B> [<B>-e</B> <I>ename</I>] [<B>-lnr</B>] [<I>first</I>] [<I>last</I>]<DD>
+
+<DT><B>fc</B> <B>-s</B> [<I>pat</I>=<I>rep</I>] [<I>cmd</I>]<DD>
+
+The first form selects a range of commands from
+<I>first</I>
+
+to
+<I>last</I>
+
+from the history list and displays or edits and re-executes them.
+<I>First</I>
+
+and
+<I>last</I>
+
+may be specified as a string (to locate the last command beginning
+with that string) or as a number (an index into the history list,
+where a negative number is used as an offset from the current
+command number).
+When listing, a <I>first</I> or <I>last</I> of
+0 is equivalent to -1 and -0 is equivalent to the current
+command (usually the <B>fc</B> command); otherwise 0 is equivalent to -1
+and -0 is invalid.
+If
+<I>last</I>
+
+is not specified, it is set to
+the current command for listing (so that
+
+<TT>fc -l -10</TT>
+prints the last 10 commands) and to
+<I>first</I>
+
+otherwise.
+If
+<I>first</I>
+
+is not specified, it is set to the previous
+command for editing and -16 for listing.
+<P>
+The
+<B>-n</B>
+
+option suppresses
+the command numbers when listing.  The
+<B>-r</B>
+
+option reverses the order of
+the commands.  If the
+<B>-l</B>
+
+option is given,
+the commands are listed on
+standard output.  Otherwise, the editor given by
+<I>ename</I>
+
+is invoked
+on a file containing those commands.  If
+<I>ename</I>
+
+is not given, the
+value of the
+<FONT SIZE=-1><B>FCEDIT</B>
+
+</FONT>
+variable is used, and
+the value of
+<FONT SIZE=-1><B>EDITOR</B>
+
+</FONT>
+if
+<FONT SIZE=-1><B>FCEDIT</B>
+
+</FONT>
+is not set.  If neither variable is set,
+
+<I>vi</I>
+
+is used.  When editing is complete, the edited commands are
+echoed and executed.
+<P>
+In the second form, <I>command</I> is re-executed after each instance
+of <I>pat</I> is replaced by <I>rep</I>.
+<I>Command</I> is interpreted the same as <I>first</I> above.
+A useful alias to use with this is
+
+<TT>r='fc -s'</TT>,
+so that typing
+
+<TT>r cc</TT>
+runs the last command beginning with
+
+<TT>cc</TT>
+and typing
+
+<TT>r</TT>
+re-executes the last command.
+<P>
+If the first form is used, the return value is 0 unless an invalid
+option is encountered or
+<I>first</I>
+
+or
+<I>last</I>
+
+specify history lines out of range.
+If the
+<B>-e</B>
+
+option is supplied, the return value is the value of the last
+command executed or failure if an error occurs with the temporary
+file of commands.  If the second form is used, the return status
+is that of the command re-executed, unless
+<I>cmd</I>
+
+does not specify a valid history line, in which case
+<B>fc</B>
+
+returns failure.
+<DT><B>fg</B> [<I>jobspec</I>]<DD>
+Resume
+<I>jobspec</I>
+
+in the foreground, and make it the current job.
+If
+<I>jobspec</I>
+
+is not present, the shell's notion of the <I>current job</I> is used.
+The return value is that of the command placed into the foreground,
+or failure if run when job control is disabled or, when run with
+job control enabled, if
+<I>jobspec</I>
+
+does not specify a valid job or
+<I>jobspec</I>
+
+specifies a job that was started without job control.
+<DT><B>getopts</B> <I>optstring</I> <I>name</I> [<I>arg ...</I>]<DD>
+<B>getopts</B>
+
+is used by shell procedures to parse positional parameters.
+<I>optstring</I>
+
+contains the option characters to be recognized; if a character
+is followed by a colon, the option is expected to have an
+argument, which should be separated from it by white space.
+The colon and question mark characters may not be used as
+option characters.
+Each time it is invoked,
+<B>getopts</B>
+
+places the next option in the shell variable
+<I>name</I>,
+
+initializing
+<I>name</I>
+
+if it does not exist,
+and the index of the next argument to be processed into the
+variable
+<FONT SIZE=-1><B>OPTIND</B>.
+
+</FONT>
+<FONT SIZE=-1><B>OPTIND</B>
+
+</FONT>
+is initialized to 1 each time the shell or a shell script
+is invoked.  When an option requires an argument,
+<B>getopts</B>
+
+places that argument into the variable
+<FONT SIZE=-1><B>OPTARG</B>.
+
+</FONT>
+The shell does not reset
+<FONT SIZE=-1><B>OPTIND</B>
+
+</FONT>
+automatically; it must be manually reset between multiple
+calls to
+<B>getopts</B>
+
+within the same shell invocation if a new set of parameters
+is to be used.
+<P>
+When the end of options is encountered, <B>getopts</B> exits with a
+return value greater than zero.
+<FONT SIZE=-1><B>OPTIND</B>
+
+</FONT>
+is set to the index of the first non-option argument,
+and <I>name</I> is set to ?.
+<P>
+<B>getopts</B>
+
+normally parses the positional parameters, but if more arguments are
+supplied as
+<I>arg</I>
+
+values,
+<B>getopts</B>
+
+parses those instead.
+<P>
+<B>getopts</B>
+
+can report errors in two ways.  If the first character of
+<I>optstring</I>
+
+is a colon,
+<I>silent</I>
+
+error reporting is used.  In normal operation, diagnostic messages
+are printed when invalid options or missing option arguments are
+encountered.
+If the variable
+<FONT SIZE=-1><B>OPTERR</B>
+
+</FONT>
+is set to 0, no error messages will be displayed, even if the first
+character of
+<I>optstring</I>
+
+is not a colon.
+<P>
+If an invalid option is seen,
+<B>getopts</B>
+
+places ? into
+<I>name</I>
+
+and, if not silent,
+prints an error message and unsets
+<FONT SIZE=-1><B>OPTARG</B>.
+
+</FONT>
+If
+<B>getopts</B>
+
+is silent,
+the option character found is placed in
+<FONT SIZE=-1><B>OPTARG</B>
+
+</FONT>
+and no diagnostic message is printed.
+<P>
+If a required argument is not found, and
+<B>getopts</B>
+
+is not silent,
+a question mark (<B>?</B>) is placed in
+<I>name</I>,
+
+<FONT SIZE=-1><B>OPTARG</B>
+
+</FONT>
+is unset, and a diagnostic message is printed.
+If
+<B>getopts</B>
+
+is silent, then a colon (<B>:</B>) is placed in
+<I>name</I>
+
+and
+<FONT SIZE=-1><B>OPTARG</B>
+
+</FONT>
+is set to the option character found.
+<P>
+<B>getopts</B>
+
+returns true if an option, specified or unspecified, is found.
+It returns false if the end of options is encountered or an
+error occurs.
+<DT><B>hash</B> [<B>-lr</B>] [<B>-p</B> <I>filename</I>] [<B>-dt</B>] [<I>name</I>]<DD>
+Each time <B>hash</B> is invoked,
+the full pathname of the command
+<I>name</I>
+
+is determined by searching
+the directories in
+<B>$PATH</B>
+
+and remembered.  Any previously-remembered pathname is discarded.
+If the
+<B>-p</B>
+
+option is supplied, no path search is performed, and
+<I>filename</I>
+
+is used as the full filename of the command.
+The
+<B>-r</B>
+
+option causes the shell to forget all
+remembered locations.
+The
+<B>-d</B>
+
+option causes the shell to forget the remembered location of each <I>name</I>.
+If the
+<B>-t</B>
+
+option is supplied, the full pathname to which each <I>name</I> corresponds
+is printed.  If multiple <I>name</I> arguments are supplied with <B>-t</B>,
+the <I>name</I> is printed before the hashed full pathname.
+The
+<B>-l</B>
+
+option causes output to be displayed in a format that may be reused as input.
+If no arguments are given, or if only <B>-l</B> is supplied,
+information about remembered commands is printed.
+The return status is true unless a
+<I>name</I>
+
+is not found or an invalid option is supplied.
+<DT><B>help</B> [<B>-dms</B>] [<I>pattern</I>]<DD>
+Display helpful information about builtin commands.  If
+<I>pattern</I>
+
+is specified,
+<B>help</B>
+
+gives detailed help on all commands matching
+<I>pattern</I>;
+
+otherwise help for all the builtins and shell control structures
+is printed.
+<DL COMPACT><DT><DD>
+
+<DL COMPACT>
+<DT><B>-d</B>
+
+<DD>
+Display a short description of each <I>pattern</I>
+<DT><B>-m</B>
+
+<DD>
+Display the description of each <I>pattern</I> in a manpage-like format
+<DT><B>-s</B>
+
+<DD>
+Display only a short usage synopsis for each <I>pattern</I>
+
+</DL>
+<P>
+
+The return status is 0 unless no command matches
+<I>pattern</I>.
+
+</DL>
+
+<DT><B>history [</B><I>n</I>]<DD>
+
+<DT><B>history</B> <B>-c</B><DD>
+<DT><B>history -d</B> <I>offset</I><DD>
+<DT><B>history -d</B> <I>start</I>-<I>end</I><DD>
+<DT><B>history</B> <B>-anrw</B> [<I>filename</I>]<DD>
+<DT><B>history</B> <B>-p</B> <I>arg</I> [<I>arg ...</I>]<DD>
+<DT><B>history</B> <B>-s</B> <I>arg</I> [<I>arg ...</I>]<DD>
+
+With no options, display the command
+history list with line numbers.  Lines listed
+with a
+<B>*</B>
+
+have been modified.  An argument of
+<I>n</I>
+
+lists only the last
+<I>n</I>
+
+lines.
+If the shell variable
+<FONT SIZE=-1><B>HISTTIMEFORMAT</B>
+
+</FONT>
+is set and not null,
+it is used as a format string for <I>strftime</I>(3) to display
+the time stamp associated with each displayed history entry.
+No intervening blank is printed between the formatted time stamp
+and the history line.
+If <I>filename</I> is supplied, it is used as the
+name of the history file; if not, the value of
+<FONT SIZE=-1><B>HISTFILE</B>
+
+</FONT>
+is used.  Options, if supplied, have the following meanings:
+<DL COMPACT><DT><DD>
+
+<DL COMPACT>
+<DT><B>-c</B>
+
+<DD>
+Clear the history list by deleting all the entries.
+<DT><B>-d</B> <I>offset</I><DD>
+Delete the history entry at position <I>offset</I>.
+If <I>offset</I> is negative, it is interpreted as relative to one greater
+than the last history position, so negative indices count back from the
+end of the history, and an index of -1 refers to the current
+<B>history -d</B> command.
+<DT><B>-d</B> <I>start</I>-<I>end</I><DD>
+Delete the history entries between positions <I>start</I> and <I>end</I>,
+inclusive.  Positive and negative values for <I>start</I> and <I>end</I>
+are interpreted as described above.
+<DT><B>-a</B>
+
+<DD>
+Append the ``new'' history lines to the history file.
+These are history lines entered since the beginning of the current
+<B>bash</B> session, but not already appended to the history file.
+<DT><B>-n</B>
+
+<DD>
+Read the history lines not already read from the history
+file into the current history list.  These are lines
+appended to the history file since the beginning of the
+current <B>bash</B> session.
+<DT><B>-r</B>
+
+<DD>
+Read the contents of the history file
+and append them to the current history list.
+<DT><B>-w</B>
+
+<DD>
+Write the current history list to the history file, overwriting the
+history file's contents.
+<DT><B>-p</B>
+
+<DD>
+Perform history substitution on the following <I>args</I> and display
+the result on the standard output.
+Does not store the results in the history list.
+Each <I>arg</I> must be quoted to disable normal history expansion.
+<DT><B>-s</B>
+
+<DD>
+Store the
+<I>args</I>
+
+in the history list as a single entry.  The last command in the
+history list is removed before the
+<I>args</I>
+
+are added.
+
+</DL>
+<P>
+
+If the
+<FONT SIZE=-1><B>HISTTIMEFORMAT</B>
+
+</FONT>
+variable is set, the time stamp information
+associated with each history entry is written to the history file,
+marked with the history comment character.
+When the history file is read, lines beginning with the history
+comment character followed immediately by a digit are interpreted
+as timestamps for the following history entry.
+The return value is 0 unless an invalid option is encountered, an
+error occurs while reading or writing the history file, an invalid
+<I>offset</I> is supplied as an argument to <B>-d</B>, or the
+history expansion supplied as an argument to <B>-p</B> fails.
+</DL>
+
+<DT><B>jobs</B> [<B>-lnprs</B>] [ <I>jobspec</I> ... ]<DD>
+
+<DT><B>jobs</B> <B>-x</B> <I>command</I> [ <I>args</I> ... ]<DD>
+
+The first form lists the active jobs.  The options have the following
+meanings:
+<DL COMPACT><DT><DD>
+
+<DL COMPACT>
+<DT><B>-l</B>
+
+<DD>
+List process IDs
+in addition to the normal information.
+<DT><B>-n</B>
+
+<DD>
+Display information only about jobs that have changed status since
+the user was last notified of their status.
+<DT><B>-p</B>
+
+<DD>
+List only the process ID of the job's process group
+leader.
+<DT><B>-r</B>
+
+<DD>
+Display only running jobs.
+<DT><B>-s</B>
+
+<DD>
+Display only stopped jobs.
+
+</DL>
+<P>
+
+If
+<I>jobspec</I>
+
+is given, output is restricted to information about that job.
+The return status is 0 unless an invalid option is encountered
+or an invalid
+<I>jobspec</I>
+
+is supplied.
+<P>
+
+If the
+<B>-x</B>
+
+option is supplied,
+<B>jobs</B>
+
+replaces any
+<I>jobspec</I>
+
+found in
+<I>command</I>
+
+or
+<I>args</I>
+
+with the corresponding process group ID, and executes
+<I>command</I>
+
+passing it
+<I>args</I>,
+
+returning its exit status.
+</DL>
+
+<DT><B>kill</B> [<B>-s</B> <I>sigspec</I> | <B>-n</B> <I>signum</I> | <B>-</B><I>sigspec</I>] [<I>pid</I> | <I>jobspec</I>] ...<DD>
+
+<DT><B>kill</B> <B>-l</B>|<B>-L</B> [<I>sigspec</I> | <I>exit_status</I>]<DD>
+
+Send the signal named by
+<I>sigspec</I>
+
+or
+<I>signum</I>
+
+to the processes named by
+<I>pid</I>
+
+or
+<I>jobspec</I>.
+
+<I>sigspec</I>
+
+is either a case-insensitive signal name such as
+<FONT SIZE=-1><B>SIGKILL</B>
+
+</FONT>
+(with or without the
+<FONT SIZE=-1><B>SIG</B>
+
+</FONT>
+prefix) or a signal number;
+<I>signum</I>
+
+is a signal number.
+If
+<I>sigspec</I>
+
+is not present, then
+<FONT SIZE=-1><B>SIGTERM</B>
+
+</FONT>
+is assumed.
+An argument of
+<B>-l</B>
+
+lists the signal names.
+If any arguments are supplied when
+<B>-l</B>
+
+is given, the names of the signals corresponding to the arguments are
+listed, and the return status is 0.
+The <I>exit_status</I> argument to
+<B>-l</B>
+
+is a number specifying either a signal number or the exit status of
+a process terminated by a signal.
+The
+<B>-L</B>
+
+option is equivalent to <B>-l</B>.
+<B>kill</B>
+
+returns true if at least one signal was successfully sent, or false
+if an error occurs or an invalid option is encountered.
+<DT><B>let</B> <I>arg</I> [<I>arg</I> ...]<DD>
+Each
+<I>arg</I>
+
+is an arithmetic expression to be evaluated (see
+<FONT SIZE=-1><B>ARITHMETIC EVALUATION</B>
+
+</FONT>
+above).
+If the last
+<I>arg</I>
+
+evaluates to 0,
+<B>let</B>
+
+returns 1; 0 is returned otherwise.
+<DT><B>local</B> [<I>option</I>] [<I>name</I>[=<I>value</I>] ... | - ]<DD>
+For each argument, a local variable named
+<I>name</I>
+
+is created, and assigned
+<I>value</I>.
+
+The <I>option</I> can be any of the options accepted by <B>declare</B>.
+When
+<B>local</B>
+
+is used within a function, it causes the variable
+<I>name</I>
+
+to have a visible scope restricted to that function and its children.
+If <I>name</I> is -, the set of shell options is made local to the function
+in which <B>local</B> is invoked: shell options changed using the
+<B>set</B> builtin inside the function are restored to their original values
+when the function returns.
+The restore is effected as if a series of <B>set</B> commands were executed
+to restore the values that were in place before the function.
+With no operands,
+<B>local</B>
+
+writes a list of local variables to the standard output.  It is
+an error to use
+<B>local</B>
+
+when not within a function.  The return status is 0 unless
+<B>local</B>
+
+is used outside a function, an invalid
+<I>name</I>
+
+is supplied, or
+<I>name</I> is a readonly variable.
+<DT><B>logout</B>
+
+<DD>
+Exit a login shell.
+<DT><B>mapfile</B> [<B>-d</B> <I>delim</I>] [<B>-n</B> <I>count</I>] [<B>-O</B> <I>origin</I>] [<B>-s</B> <I>count</I>] [<B>-t</B>] [<B>-u</B> <I>fd</I>] [<B>-C</B> <I>callback</I>] [<B>-c</B> <I>quantum</I>] [<I>array</I>]<DD>
+
+<DT><B>readarray</B> [<B>-d</B> <I>delim</I>] [<B>-n</B> <I>count</I>] [<B>-O</B> <I>origin</I>] [<B>-s</B> <I>count</I>] [<B>-t</B>] [<B>-u</B> <I>fd</I>] [<B>-C</B> <I>callback</I>] [<B>-c</B> <I>quantum</I>] [<I>array</I>]<DD>
+
+Read lines from the standard input into the indexed array variable
+<I>array</I>,
+
+or from file descriptor
+<I>fd</I>
+
+if the
+<B>-u</B>
+
+option is supplied.
+The variable
+<FONT SIZE=-1><B>MAPFILE</B>
+
+</FONT>
+is the default <I>array</I>.
+Options, if supplied, have the following meanings:
+<DL COMPACT><DT><DD>
+
+<DL COMPACT>
+<DT><B>-d</B>
+
+<DD>
+The first character of <I>delim</I> is used to terminate each input line,
+rather than newline.
+If <I>delim</I> is the empty string, <B>mapfile</B> will terminate a line
+when it reads a NUL character.
+<DT><B>-n</B>
+
+<DD>
+Copy at most
+<I>count</I>
+
+lines.  If <I>count</I> is 0, all lines are copied.
+<DT><B>-O</B>
+
+<DD>
+Begin assigning to
+<I>array</I>
+
+at index
+<I>origin</I>.
+
+The default index is 0.
+<DT><B>-s</B>
+
+<DD>
+Discard the first <I>count</I> lines read.
+<DT><B>-t</B>
+
+<DD>
+Remove a trailing <I>delim</I> (default newline) from each line read.
+<DT><B>-u</B>
+
+<DD>
+Read lines from file descriptor <I>fd</I> instead of the standard input.
+<DT><B>-C</B>
+
+<DD>
+Evaluate
+<I>callback</I>
+
+each time <I>quantum</I> lines are read.  The <B>-c</B> option specifies
+<I>quantum</I>.
+
+<DT><B>-c</B>
+
+<DD>
+Specify the number of lines read between each call to
+<I>callback</I>.
+
+
+</DL>
+<P>
+
+If
+<B>-C</B>
+
+is specified without
+<B>-c</B>,
+
+the default quantum is 5000.
+When <I>callback</I> is evaluated, it is supplied the index of the next
+array element to be assigned and the line to be assigned to that element
+as additional arguments.
+<I>callback</I> is evaluated after the line is read but before the
+array element is assigned.
+<P>
+
+If not supplied with an explicit origin, <B>mapfile</B> will clear <I>array</I>
+before assigning to it.
+<P>
+
+<B>mapfile</B> returns successfully unless an invalid option or option
+argument is supplied, <I>array</I> is invalid or unassignable, or if
+<I>array</I> is not an indexed array.
+</DL>
+
+<DT><B>popd</B> [-<B>n</B>] [+<I>n</I>] [-<I>n</I>]<DD>
+Removes entries from the directory stack.  With no arguments,
+removes the top directory from the stack, and performs a
+<B>cd</B>
+
+to the new top directory.
+Arguments, if supplied, have the following meanings:
+<DL COMPACT><DT><DD>
+
+<DL COMPACT>
+<DT><B>-n</B>
+
+<DD>
+Suppresses the normal change of directory when removing directories
+from the stack, so that only the stack is manipulated.
+<DT><B>+</B><I>n</I><DD>
+Removes the <I>n</I>th entry counting from the left of the list
+shown by
+<B>dirs</B>,
+
+starting with zero.  For example:
+
+<TT>popd +0</TT>
+removes the first directory,
+
+<TT>popd +1</TT>
+the second.
+<DT><B>-</B><I>n</I><DD>
+Removes the <I>n</I>th entry counting from the right of the list
+shown by
+<B>dirs</B>,
+
+starting with zero.  For example:
+
+<TT>popd -0</TT>
+removes the last directory,
+
+<TT>popd -1</TT>
+the next to last.
+
+</DL>
+<P>
+
+If the
+<B>popd</B>
+
+command is successful, a
+<B>dirs</B>
+
+is performed as well, and the return status is 0.
+<B>popd</B>
+
+returns false if an invalid option is encountered, the directory stack
+is empty, a non-existent directory stack entry is specified, or the
+directory change fails.
+</DL>
+
+<DT><B>printf</B> [<B>-v</B> <I>var</I>] <I>format</I> [<I>arguments</I>]<DD>
+Write the formatted <I>arguments</I> to the standard output under the
+control of the <I>format</I>.
+The <B>-v</B> option causes the output to be assigned to the variable
+<I>var</I> rather than being printed to the standard output.
+<P>
+The <I>format</I> is a character string which contains three types of objects:
+plain characters, which are simply copied to standard output, character
+escape sequences, which are converted and copied to the standard output, and
+format specifications, each of which causes printing of the next successive
+<I>argument</I>.
+In addition to the standard <I>printf</I>(1) format specifications,
+<B>printf</B> interprets the following extensions:
+<DL COMPACT><DT><DD>
+
+<DL COMPACT>
+<DT><B>%b</B>
+
+<DD>
+causes
+<B>printf</B> to expand backslash escape sequences in the corresponding
+<I>argument</I>
+in the same way as <B>echo -e</B>.
+<DT><B>%q</B>
+
+<DD>
+causes <B>printf</B> to output the corresponding
+<I>argument</I> in a format that can be reused as shell input.
+<DT><B>%(</B><I>datefmt</I>)T
+
+<DD>
+causes <B>printf</B> to output the date-time string resulting from using
+<I>datefmt</I> as a format string for <I>strftime</I>(3).
+The corresponding <I>argument</I> is an integer representing the number of
+seconds since the epoch.
+Two special argument values may be used: -1 represents the current
+time, and -2 represents the time the shell was invoked.
+If no argument is specified, conversion behaves as if -1 had been given.
+This is an exception to the usual <B>printf</B> behavior.
+
+</DL>
+<P>
+
+The %b, %q, and %T directives all use the field width and precision
+arguments from the format specification and write that many bytes from
+(or use that wide a field for) the expanded argument, which usually
+contains more characters than the original.
+<P>
+
+Arguments to non-string format specifiers are treated as C constants,
+except that a leading plus or minus sign is allowed, and if the leading
+character is a single or double quote, the value is the ASCII value of
+the following character.
+<P>
+
+The <I>format</I> is reused as necessary to consume all of the <I>arguments</I>.
+If the <I>format</I> requires more <I>arguments</I> than are supplied, the
+extra format specifications behave as if a zero value or null string, as
+appropriate, had been supplied.
+The return value is zero on success, non-zero on failure.
+</DL>
+
+<DT><B>pushd</B> [<B>-n</B>] [+<I>n</I>] [-<I>n</I>]<DD>
+
+<DT><B>pushd</B> [<B>-n</B>] [<I>dir</I>]<DD>
+
+Adds a directory to the top of the directory stack, or rotates
+the stack, making the new top of the stack the current working
+directory.  With no arguments, <B>pushd</B> exchanges the top two directories
+and returns 0, unless the directory stack is empty.
+Arguments, if supplied, have the following meanings:
+<DL COMPACT><DT><DD>
+
+<DL COMPACT>
+<DT><B>-n</B>
+
+<DD>
+Suppresses the normal change of directory when rotating or
+adding directories to the stack, so that only the stack is manipulated.
+<DT><B>+</B><I>n</I><DD>
+Rotates the stack so that the <I>n</I>th directory
+(counting from the left of the list shown by
+<B>dirs</B>,
+
+starting with zero)
+is at the top.
+<DT><B>-</B><I>n</I><DD>
+Rotates the stack so that the <I>n</I>th directory
+(counting from the right of the list shown by
+<B>dirs</B>,
+
+starting with zero) is at the top.
+<DT><I>dir</I>
+
+<DD>
+Adds
+<I>dir</I>
+
+to the directory stack at the top, making it the
+new current working directory as if it had been supplied as the argument
+to the <B>cd</B> builtin.
+
+</DL>
+<P>
+
+If the
+<B>pushd</B>
+
+command is successful, a
+<B>dirs</B>
+
+is performed as well.
+If the first form is used,
+<B>pushd</B>
+
+returns 0 unless the cd to
+<I>dir</I>
+
+fails.  With the second form,
+<B>pushd</B>
+
+returns 0 unless the directory stack is empty,
+a non-existent directory stack element is specified,
+or the directory change to the specified new current directory
+fails.
+</DL>
+
+<DT><B>pwd</B> [<B>-LP</B>]<DD>
+Print the absolute pathname of the current working directory.
+The pathname printed contains no symbolic links if the
+<B>-P</B>
+
+option is supplied or the
+<B>-o physical</B>
+
+option to the
+<B>set</B>
+
+builtin command is enabled.
+If the
+<B>-L</B>
+
+option is used, the pathname printed may contain symbolic links.
+The return status is 0 unless an error occurs while
+reading the name of the current directory or an
+invalid option is supplied.
+<DT><B>read</B> [<B>-ers</B>] [<B>-a</B> <I>aname</I>] [<B>-d</B> <I>delim</I>] [<B>-i</B> <I>text</I>] [<B>-n</B> <I>nchars</I>] [<B>-N</B> <I>nchars</I>] [<B>-p</B> <I>prompt</I>] [<B>-t</B> <I>timeout</I>] [<B>-u</B> <I>fd</I>] [<I>name</I> ...]<DD>
+One line is read from the standard input, or from the file descriptor
+<I>fd</I> supplied as an argument to the <B>-u</B> option,
+split into words as described above under <B>Word Splitting</B>,
+and the first word
+is assigned to the first
+<I>name</I>,
+
+the second word to the second
+<I>name</I>,
+
+and so on.
+If there are more words than names, the remaining words and their
+intervening delimiters are assigned to the last
+<I>name</I>.
+
+If there are fewer words read from the input stream than names,
+the remaining names are assigned empty values.
+The characters in
+<FONT SIZE=-1><B>IFS</B>
+
+</FONT>
+are used to split the line into words using the same rules the shell
+uses for expansion (described above under <B>Word Splitting</B>).
+The backslash character (<B>\</B>) may be used to remove any special
+meaning for the next character read and for line continuation.
+Options, if supplied, have the following meanings:
+<DL COMPACT><DT><DD>
+
+<DL COMPACT>
+<DT><B>-a </B><I>aname</I>
+
+<DD>
+The words are assigned to sequential indices
+of the array variable
+<I>aname</I>,
+
+starting at 0.
+<I>aname</I>
+
+is unset before any new values are assigned.
+Other <I>name</I> arguments are ignored.
+<DT><B>-d </B><I>delim</I>
+
+<DD>
+The first character of <I>delim</I> is used to terminate the input line,
+rather than newline.
+If <I>delim</I> is the empty string, <B>read</B> will terminate a line
+when it reads a NUL character.
+<DT><B>-e</B>
+
+<DD>
+If the standard input
+is coming from a terminal,
+<B>readline</B>
+
+(see
+<FONT SIZE=-1><B>READLINE</B>
+
+</FONT>
+above) is used to obtain the line.
+Readline uses the current (or default, if line editing was not previously
+active) editing settings, but uses Readline's default filename completion.
+<DT><B>-i </B><I>text</I>
+
+<DD>
+If
+<B>readline</B>
+
+is being used to read the line, <I>text</I> is placed into the editing
+buffer before editing begins.
+<DT><B>-n </B><I>nchars</I>
+
+<DD>
+<B>read</B> returns after reading <I>nchars</I> characters rather than
+waiting for a complete line of input, but honors a delimiter if fewer
+than <I>nchars</I> characters are read before the delimiter.
+<DT><B>-N </B><I>nchars</I>
+
+<DD>
+<B>read</B> returns after reading exactly <I>nchars</I> characters rather
+than waiting for a complete line of input, unless EOF is encountered or
+<B>read</B> times out.
+Delimiter characters encountered in the input are
+not treated specially and do not cause <B>read</B> to return until
+<I>nchars</I> characters are read.
+The result is not split on the characters in <B>IFS</B>; the intent is
+that the variable is assigned exactly the characters read
+(with the exception of backslash; see the <B>-r</B> option below).
+<DT><B>-p </B><I>prompt</I>
+
+<DD>
+Display <I>prompt</I> on standard error, without a
+trailing newline, before attempting to read any input.  The prompt
+is displayed only if input is coming from a terminal.
+<DT><B>-r</B>
+
+<DD>
+Backslash does not act as an escape character.
+The backslash is considered to be part of the line.
+In particular, a backslash-newline pair may not then be used as a line
+continuation.
+<DT><B>-s</B>
+
+<DD>
+Silent mode.  If input is coming from a terminal, characters are
+not echoed.
+<DT><B>-t </B><I>timeout</I>
+
+<DD>
+Cause <B>read</B> to time out and return failure if a complete line of
+input (or a specified number of characters)
+is not read within <I>timeout</I> seconds.
+<I>timeout</I> may be a decimal number with a fractional portion following
+the decimal point.
+This option is only effective if <B>read</B> is reading input from a
+terminal, pipe, or other special file; it has no effect when reading
+from regular files.
+If <B>read</B> times out, <B>read</B> saves any partial input read into
+the specified variable <I>name</I>.
+If <I>timeout</I> is 0, <B>read</B> returns immediately, without trying to
+read any data.  The exit status is 0 if input is available on
+the specified file descriptor, non-zero otherwise.
+The exit status is greater than 128 if the timeout is exceeded.
+<DT><B>-u </B><I>fd</I>
+
+<DD>
+Read input from file descriptor <I>fd</I>.
+
+</DL>
+<P>
+
+If no
+<I>names</I>
+
+are supplied, the line read,
+without the ending delimiter but otherwise unmodified,
+is assigned to the variable
+<FONT SIZE=-1><B>REPLY</B>.
+
+</FONT>
+The exit status is zero, unless end-of-file is encountered, <B>read</B>
+times out (in which case the status is greater than 128),
+a variable assignment error (such as assigning to a readonly variable) occurs,
+or an invalid file descriptor is supplied as the argument to <B>-u</B>.
+</DL>
+
+<DT><B>readonly</B> [<B>-aAf</B>] [<B>-p</B>] [<I>name</I>[=<I>word</I>] ...]<DD>
+
+The given
+<I>names</I> are marked readonly; the values of these
+<I>names</I>
+
+may not be changed by subsequent assignment.
+If the
+<B>-f</B>
+
+option is supplied, the functions corresponding to the
+<I>names</I> are so
+marked.
+The
+<B>-a</B>
+
+option restricts the variables to indexed arrays; the
+<B>-A</B>
+
+option restricts the variables to associative arrays.
+If both options are supplied,
+<B>-A</B>
+
+takes precedence.
+If no
+<I>name</I>
+
+arguments are given, or if the
+<B>-p</B>
+
+option is supplied, a list of all readonly names is printed.
+The other options may be used to restrict the output to a subset of
+the set of readonly names.
+The
+<B>-p</B>
+
+option causes output to be displayed in a format that
+may be reused as input.
+If a variable name is followed by =<I>word</I>, the value of
+the variable is set to <I>word</I>.
+The return status is 0 unless an invalid option is encountered,
+one of the
+<I>names</I>
+
+is not a valid shell variable name, or
+<B>-f</B>
+
+is supplied with a
+<I>name</I>
+
+that is not a function.
+<DT><B>return</B> [<I>n</I>]<DD>
+Causes a function to stop executing and return the value specified by
+<I>n</I>
+
+to its caller.
+If
+<I>n</I>
+
+is omitted, the return status is that of the last command
+executed in the function body.
+If <B>return</B> is executed by a trap handler, the last command used to
+determine the status is the last command executed before the trap handler.
+If <B>return</B> is executed during a <B>DEBUG</B> trap, the last command
+used to determine the status is the last command executed by the trap
+handler before <B>return</B> was invoked.
+If
+<B>return</B>
+
+is used outside a function,
+but during execution of a script by the
+<B>.</B>
+
+(<B>source</B>) command, it causes the shell to stop executing
+that script and return either
+<I>n</I>
+
+or the exit status of the last command executed within the
+script as the exit status of the script.
+If <I>n</I> is supplied, the return value is its least significant
+8 bits.
+The return status is non-zero if
+<B>return</B>
+
+is supplied a non-numeric argument, or
+is used outside a
+function and not during execution of a script by <B>.</B> or <B>source</B>.
+Any command associated with the <B>RETURN</B> trap is executed
+before execution resumes after the function or script.
+<DT><B>set</B> [<B>--abefhkmnptuvxBCEHPT</B>] [<B>-o</B> <I>option-name</I>] [<I>arg</I> ...]<DD>
+
+<DT><B>set</B> [<B>+abefhkmnptuvxBCEHPT</B>] [<B>+o</B> <I>option-name</I>] [<I>arg</I> ...]<DD>
+
+Without options, the name and value of each shell variable are displayed
+in a format that can be reused as input
+for setting or resetting the currently-set variables.
+Read-only variables cannot be reset.
+In <I>posix mode</I>, only shell variables are listed.
+The output is sorted according to the current locale.
+When options are specified, they set or unset shell attributes.
+Any arguments remaining after option processing are treated
+as values for the positional parameters and are assigned, in order, to
+<B>$1</B>,
+
+<B>$2</B>,
+
+<B>...</B>
+
+<B>$</B><I>n</I>.
+
+Options, if specified, have the following meanings:
+<DL COMPACT><DT><DD>
+
+<DL COMPACT>
+<DT><B>-a</B>
+
+<DD>
+Each variable or function that is created or modified is given the
+export attribute and marked for export to the environment of
+subsequent commands.
+<DT><B>-b</B>
+
+<DD>
+Report the status of terminated background jobs
+immediately, rather than before the next primary prompt.  This is
+effective only when job control is enabled.
+<DT><B>-e</B>
+
+<DD>
+Exit immediately if a
+<I>pipeline</I> (which may consist of a single <I>simple command</I>),
+a <I>list</I>,
+or a <I>compound command</I>
+(see
+<FONT SIZE=-1><B>SHELL GRAMMAR</B>
+
+</FONT>
+above), exits with a non-zero status.
+The shell does not exit if the
+command that fails is part of the command list immediately following a
+<B>while</B>
+
+or
+<B>until</B>
+
+keyword,
+part of the test following the
+<B>if</B>
+
+or
+<B>elif</B>
+
+reserved words, part of any command executed in a
+<B>&amp;&amp;</B>
+
+or
+<B>||</B>
+
+list except the command following the final <B>&amp;&amp;</B> or <B>||</B>,
+any command in a pipeline but the last,
+or if the command's return value is
+being inverted with
+<B>!</B>.
+
+If a compound command other than a subshell
+returns a non-zero status because a command failed
+while <B>-e</B> was being ignored, the shell does not exit.
+A trap on <B>ERR</B>, if set, is executed before the shell exits.
+This option applies to the shell environment and each subshell environment
+separately (see
+<FONT SIZE=-1><B>COMMAND EXECUTION ENVIRONMENT</B>
+
+</FONT>
+above), and may cause
+subshells to exit before executing all the commands in the subshell.
+<P>
+
+
+If a compound command or shell function executes in a context
+where <B>-e</B> is being ignored,
+none of the commands executed within the compound command or function body
+will be affected by the <B>-e</B> setting, even if <B>-e</B> is set
+and a command returns a failure status.
+If a compound command or shell function sets <B>-e</B> while executing in
+a context where <B>-e</B> is ignored, that setting will not have any
+effect until the compound command or the command containing the function
+call completes.
+<DT><B>-f</B>
+
+<DD>
+Disable pathname expansion.
+<DT><B>-h</B>
+
+<DD>
+Remember the location of commands as they are looked up for execution.
+This is enabled by default.
+<DT><B>-k</B>
+
+<DD>
+All arguments in the form of assignment statements
+are placed in the environment for a command, not just
+those that precede the command name.
+<DT><B>-m</B>
+
+<DD>
+Monitor mode.  Job control is enabled.  This option is on
+by default for interactive shells on systems that support
+it (see
+<FONT SIZE=-1><B>JOB CONTROL</B>
+
+</FONT>
+above).
+All processes run in a separate process group.
+When a background job completes, the shell prints a line
+containing its exit status.
+<DT><B>-n</B>
+
+<DD>
+Read commands but do not execute them.
+This may be used to check a shell script for syntax errors.
+This is ignored by interactive shells.
+<DT><B>-o </B><I>option-name</I>
+
+<DD>
+The <I>option-name</I> can be one of the following:
+<DL COMPACT><DT><DD>
+<DL COMPACT>
+<DT><B>allexport</B>
+
+<DD>
+Same as
+<B>-a</B>.
+
+<DT><B>braceexpand</B>
+
+<DD>
+Same as
+<B>-B</B>.
+
+<DT><B>emacs</B>
+
+<DD>
+Use an emacs-style command line editing interface.  This is enabled
+by default when the shell is interactive, unless the shell is started
+with the
+<B>--noediting</B>
+
+option.
+This also affects the editing interface used for <B>read -e</B>.
+<DT><B>errexit</B>
+
+<DD>
+Same as
+<B>-e</B>.
+
+<DT><B>errtrace</B>
+
+<DD>
+Same as
+<B>-E</B>.
+
+<DT><B>functrace</B>
+
+<DD>
+Same as
+<B>-T</B>.
+
+<DT><B>hashall</B>
+
+<DD>
+Same as
+<B>-h</B>.
+
+<DT><B>histexpand</B>
+
+<DD>
+Same as
+<B>-H</B>.
+
+<DT><B>history</B>
+
+<DD>
+Enable command history, as described above under
+<FONT SIZE=-1><B>HISTORY</B>.
+
+</FONT>
+This option is on by default in interactive shells.
+<DT><B>ignoreeof</B>
+
+<DD>
+The effect is as if the shell command
+<TT>IGNOREEOF=10</TT>
+
+had been executed
+(see
+<B>Shell Variables</B>
+
+above).
+<DT><B>keyword</B>
+
+<DD>
+Same as
+<B>-k</B>.
+
+<DT><B>monitor</B>
+
+<DD>
+Same as
+<B>-m</B>.
+
+<DT><B>noclobber</B>
+
+<DD>
+Same as
+<B>-C</B>.
+
+<DT><B>noexec</B>
+
+<DD>
+Same as
+<B>-n</B>.
+
+<DT><B>noglob</B>
+
+<DD>
+Same as
+<B>-f</B>.
+
+<DT><B>nolog</B>
+
+<DD>
+Currently ignored.
+<DT><B>notify</B>
+
+<DD>
+Same as
+<B>-b</B>.
+
+<DT><B>nounset</B>
+
+<DD>
+Same as
+<B>-u</B>.
+
+<DT><B>onecmd</B>
+
+<DD>
+Same as
+<B>-t</B>.
+
+<DT><B>physical</B>
+
+<DD>
+Same as
+<B>-P</B>.
+
+<DT><B>pipefail</B>
+
+<DD>
+If set, the return value of a pipeline is the value of the last
+(rightmost) command to exit with a non-zero status, or zero if all
+commands in the pipeline exit successfully.
+This option is disabled by default.
+<DT><B>posix</B>
+
+<DD>
+Change the behavior of
+<B>bash</B>
+
+where the default operation differs
+from the POSIX standard to match the standard (<I>posix mode</I>).
+See
+<FONT SIZE=-1><B>SEE ALSO</B>
+
+</FONT>
+below for a reference to a document that details how posix mode affects
+bash's behavior.
+<DT><B>privileged</B>
+
+<DD>
+Same as
+<B>-p</B>.
+
+<DT><B>verbose</B>
+
+<DD>
+Same as
+<B>-v</B>.
+
+<DT><B>vi</B>
+
+<DD>
+Use a vi-style command line editing interface.
+This also affects the editing interface used for <B>read -e</B>.
+<DT><B>xtrace</B>
+
+<DD>
+Same as
+<B>-x</B>.
+
+<P>
+</DL>
+<P>
+
+If
+<B>-o</B>
+
+is supplied with no <I>option-name</I>, the values of the current options are
+printed.
+If
+<B>+o</B>
+
+is supplied with no <I>option-name</I>, a series of
+<B>set</B>
+
+commands to recreate the current option settings is displayed on
+the standard output.
+</DL>
+
+<DT><B>-p</B>
+
+<DD>
+Turn on
+<I>privileged</I>
+
+mode.  In this mode, the
+<FONT SIZE=-1><B>$ENV</B>
+
+</FONT>
+and
+<FONT SIZE=-1><B>$BASH_ENV</B>
+
+</FONT>
+files are not processed, shell functions are not inherited from the
+environment, and the
+<FONT SIZE=-1><B>SHELLOPTS</B>,
+
+</FONT>
+<FONT SIZE=-1><B>BASHOPTS</B>,
+
+</FONT>
+<FONT SIZE=-1><B>CDPATH</B>,
+
+</FONT>
+and
+<FONT SIZE=-1><B>GLOBIGNORE</B>
+
+</FONT>
+variables, if they appear in the environment, are ignored.
+If the shell is started with the effective user (group) id not equal to the
+real user (group) id, and the <B>-p</B> option is not supplied, these actions
+are taken and the effective user id is set to the real user id.
+If the <B>-p</B> option is supplied at startup, the effective user id is
+not reset.
+Turning this option off causes the effective user
+and group ids to be set to the real user and group ids.
+<DT><B>-t</B>
+
+<DD>
+Exit after reading and executing one command.
+<DT><B>-u</B>
+
+<DD>
+Treat unset variables and parameters other than the special
+parameters &quot;@&quot; and &quot;*&quot; as an error when performing
+parameter expansion.  If expansion is attempted on an
+unset variable or parameter, the shell prints an error message, and,
+if not interactive, exits with a non-zero status.
+<DT><B>-v</B>
+
+<DD>
+Print shell input lines as they are read.
+<DT><B>-x</B>
+
+<DD>
+After expanding each <I>simple command</I>,
+<B>for</B> command, <B>case</B> command, <B>select</B> command, or
+arithmetic <B>for</B> command, display the expanded value of
+<FONT SIZE=-1><B>PS4</B>,
+
+</FONT>
+followed by the command and its expanded arguments
+or associated word list.
+<DT><B>-B</B>
+
+<DD>
+The shell performs brace expansion (see
+<B>Brace Expansion</B>
+
+above).  This is on by default.
+<DT><B>-C</B>
+
+<DD>
+If set,
+<B>bash</B>
+
+does not overwrite an existing file with the
+<B>&gt;</B>,
+
+<B>&gt;&amp;</B>,
+
+and
+<B>&lt;&gt;</B>
+
+redirection operators.  This may be overridden when
+creating output files by using the redirection operator
+<B>&gt;|</B>
+
+instead of
+<B>&gt;</B>.
+
+<DT><B>-E</B>
+
+<DD>
+If set, any trap on <B>ERR</B> is inherited by shell functions, command
+substitutions, and commands executed in a subshell environment.
+The <B>ERR</B> trap is normally not inherited in such cases.
+<DT><B>-H</B>
+
+<DD>
+Enable
+<B>!</B>
+
+style history substitution.  This option is on by
+default when the shell is interactive.
+<DT><B>-P</B>
+
+<DD>
+If set, the shell does not resolve symbolic links when executing
+commands such as
+<B>cd</B>
+
+that change the current working directory.  It uses the
+physical directory structure instead.  By default,
+<B>bash</B>
+
+follows the logical chain of directories when performing commands
+which change the current directory.
+<DT><B>-T</B>
+
+<DD>
+If set, any traps on <B>DEBUG</B> and <B>RETURN</B> are inherited by shell
+functions, command substitutions, and commands executed in a
+subshell environment.
+The <B>DEBUG</B> and <B>RETURN</B> traps are normally not inherited
+in such cases.
+<DT><B>--</B>
+
+<DD>
+If no arguments follow this option, then the positional parameters are
+unset.  Otherwise, the positional parameters are set to the
+<I>arg</I>s, even if some of them begin with a
+<B>-</B>.
+
+<DT><B>-</B>
+
+<DD>
+Signal the end of options, cause all remaining <I>arg</I>s to be
+assigned to the positional parameters.  The
+<B>-x</B>
+
+and
+<B>-v</B>
+
+options are turned off.
+If there are no <I>arg</I>s,
+the positional parameters remain unchanged.
+
+</DL>
+<P>
+
+The options are off by default unless otherwise noted.
+Using + rather than - causes these options to be turned off.
+The options can also be specified as arguments to an invocation of
+the shell.
+The current set of options may be found in
+<B>$-</B>.
+
+The return status is always true unless an invalid option is encountered.
+</DL>
+
+<DT><B>shift</B> [<I>n</I>]<DD>
+The positional parameters from <I>n</I>+1 ... are renamed to
+<B>$1</B>
+
+<B>....</B>
+
+Parameters represented by the numbers <B>$#</B>
+down to <B>$#</B>-<I>n</I>+1 are unset.
+<I>n</I>
+
+must be a non-negative number less than or equal to <B>$#</B>.
+If
+<I>n</I>
+
+is 0, no parameters are changed.
+If
+<I>n</I>
+
+is not given, it is assumed to be 1.
+If
+<I>n</I>
+
+is greater than <B>$#</B>, the positional parameters are not changed.
+The return status is greater than zero if
+<I>n</I>
+
+is greater than
+<B>$#</B>
+
+or less than zero; otherwise 0.
+<DT><B>shopt</B> [<B>-pqsu</B>] [<B>-o</B>] [<I>optname</I> ...]<DD>
+Toggle the values of settings controlling optional shell behavior.
+The settings can be either those listed below, or, if the
+<B>-o</B>
+
+option is used, those available with the
+<B>-o</B>
+
+option to the <B>set</B> builtin command.
+With no options, or with the
+<B>-p</B>
+
+option, a list of all settable options is displayed, with
+an indication of whether or not each is set;
+if <I>optnames</I> are supplied, the output is restricted to those options.
+The <B>-p</B> option causes output to be displayed in a form that
+may be reused as input.
+Other options have the following meanings:
+<DL COMPACT><DT><DD>
+
+<DL COMPACT>
+<DT><B>-s</B>
+
+<DD>
+Enable (set) each <I>optname</I>.
+<DT><B>-u</B>
+
+<DD>
+Disable (unset) each <I>optname</I>.
+<DT><B>-q</B>
+
+<DD>
+Suppresses normal output (quiet mode); the return status indicates
+whether the <I>optname</I> is set or unset.
+If multiple <I>optname</I> arguments are given with
+<B>-q</B>,
+
+the return status is zero if all <I>optnames</I> are enabled; non-zero
+otherwise.
+<DT><B>-o</B>
+
+<DD>
+Restricts the values of <I>optname</I> to be those defined for the
+<B>-o</B>
+
+option to the
+<B>set</B>
+
+builtin.
+
+</DL>
+<P>
+
+If either
+<B>-s</B>
+
+or
+<B>-u</B>
+
+is used with no <I>optname</I> arguments,
+<B>shopt</B>
+
+shows only those options which are set or unset, respectively.
+Unless otherwise noted, the <B>shopt</B> options are disabled (unset)
+by default.
+<P>
+
+The return status when listing options is zero if all <I>optnames</I>
+are enabled, non-zero otherwise.  When setting or unsetting options,
+the return status is zero unless an <I>optname</I> is not a valid shell
+option.
+<P>
+
+The list of <B>shopt</B> options is:
+<P>
+
+
+
+<DL COMPACT>
+<DT><B>assoc_expand_once</B>
+
+<DD>
+If set, the shell suppresses multiple evaluation of associative array
+subscripts during arithmetic expression evaluation, while executing
+builtins that can perform variable assignments,
+and while executing builtins that perform array dereferencing.
+<DT><B>autocd</B>
+
+<DD>
+If set, a command name that is the name of a directory is executed as if
+it were the argument to the <B>cd</B> command.
+This option is only used by interactive shells.
+<DT><B>cdable_vars</B>
+
+<DD>
+If set, an argument to the
+<B>cd</B>
+
+builtin command that
+is not a directory is assumed to be the name of a variable whose
+value is the directory to change to.
+<DT><B>cdspell</B>
+
+<DD>
+If set, minor errors in the spelling of a directory component in a
+<B>cd</B>
+
+command will be corrected.
+The errors checked for are transposed characters,
+a missing character, and one character too many.
+If a correction is found, the corrected filename is printed,
+and the command proceeds.
+This option is only used by interactive shells.
+<DT><B>checkhash</B>
+
+<DD>
+If set, <B>bash</B> checks that a command found in the hash
+table exists before trying to execute it.  If a hashed command no
+longer exists, a normal path search is performed.
+<DT><B>checkjobs</B>
+
+<DD>
+If set, <B>bash</B> lists the status of any stopped and running jobs before
+exiting an interactive shell.  If any jobs are running, this causes
+the exit to be deferred until a second exit is attempted without an
+intervening command (see
+<FONT SIZE=-1><B>JOB CONTROL</B>
+
+</FONT>
+above).  The shell always
+postpones exiting if any jobs are stopped.
+<DT><B>checkwinsize</B>
+
+<DD>
+If set, <B>bash</B> checks the window size after each external (non-builtin)
+command and, if necessary, updates the values of
+<FONT SIZE=-1><B>LINES</B>
+
+</FONT>
+and
+<FONT SIZE=-1><B>COLUMNS</B>.
+
+</FONT>
+This option is enabled by default.
+<DT><B>cmdhist</B>
+
+<DD>
+If set,
+<B>bash</B>
+
+attempts to save all lines of a multiple-line
+command in the same history entry.  This allows
+easy re-editing of multi-line commands.
+This option is enabled by default, but only has an effect if command
+history is enabled, as described above under
+<FONT SIZE=-1><B>HISTORY</B>.
+
+</FONT>
+
+<DT><B>compat31</B>
+
+<DD>
+<DT><B>compat32</B>
+
+<DD>
+<DT><B>compat40</B>
+
+<DD>
+<DT><B>compat41</B>
+
+<DD>
+<DT><B>compat42</B>
+
+<DD>
+<DT><B>compat43</B>
+
+<DD>
+<DT><B>compat44</B>
+
+<DD>
+
+These control aspects of the shell's compatibility mode
+(see
+<FONT SIZE=-1><B>SHELL COMPATIBILITY MODE</B>
+
+</FONT>
+below).
+<DT><B>complete_fullquote</B>
+
+<DD>
+If set,
+<B>bash</B>
+
+quotes all shell metacharacters in filenames and directory names when
+performing completion.
+If not set,
+<B>bash</B>
+
+removes metacharacters such as the dollar sign from the set of
+characters that will be quoted in completed filenames
+when these metacharacters appear in shell variable references in words to be
+completed.
+This means that dollar signs in variable names that expand to directories
+will not be quoted;
+however, any dollar signs appearing in filenames will not be quoted, either.
+This is active only when bash is using backslashes to quote completed
+filenames.
+This variable is set by default, which is the default bash behavior in
+versions through 4.2.
+<DT><B>direxpand</B>
+
+<DD>
+If set,
+<B>bash</B>
+
+replaces directory names with the results of word expansion when performing
+filename completion.  This changes the contents of the readline editing
+buffer.
+If not set,
+<B>bash</B>
+
+attempts to preserve what the user typed.
+<DT><B>dirspell</B>
+
+<DD>
+If set,
+<B>bash</B>
+
+attempts spelling correction on directory names during word completion
+if the directory name initially supplied does not exist.
+<DT><B>dotglob</B>
+
+<DD>
+If set,
+<B>bash</B>
+
+includes filenames beginning with a `.' in the results of pathname
+expansion.
+The filenames
+<B>``.''</B>
+
+and
+<B>``..''</B>
+
+must always be matched explicitly, even if
+<B>dotglob</B>
+
+is set.
+<DT><B>execfail</B>
+
+<DD>
+If set, a non-interactive shell will not exit if
+it cannot execute the file specified as an argument to the
+<B>exec</B>
+
+builtin command.  An interactive shell does not exit if
+<B>exec</B>
+
+fails.
+<DT><B>expand_aliases</B>
+
+<DD>
+If set, aliases are expanded as described above under
+<FONT SIZE=-1><B>ALIASES</B>.
+
+</FONT>
+This option is enabled by default for interactive shells.
+<DT><B>extdebug</B>
+
+<DD>
+If set at shell invocation,
+or in a shell startup file,
+arrange to execute the debugger profile
+before the shell starts, identical to the <B>--debugger</B> option.
+If set after invocation, behavior intended for use by debuggers is enabled:
+<DL COMPACT><DT><DD>
+<DL COMPACT>
+<DT><B>1.</B>
+
+<DD>
+The <B>-F</B> option to the <B>declare</B> builtin displays the source
+file name and line number corresponding to each function name supplied
+as an argument.
+<DT><B>2.</B>
+
+<DD>
+If the command run by the <B>DEBUG</B> trap returns a non-zero value, the
+next command is skipped and not executed.
+<DT><B>3.</B>
+
+<DD>
+If the command run by the <B>DEBUG</B> trap returns a value of 2, and the
+shell is executing in a subroutine (a shell function or a shell script
+executed by the <B>.</B> or <B>source</B> builtins), the shell simulates
+a call to <B>return</B>.
+<DT><B>4.</B>
+
+<DD>
+<FONT SIZE=-1><B>BASH_ARGC</B>
+
+</FONT>
+and
+<FONT SIZE=-1><B>BASH_ARGV</B>
+
+</FONT>
+are updated as described in their descriptions above.
+<DT><B>5.</B>
+
+<DD>
+Function tracing is enabled: command substitution, shell functions, and
+subshells invoked with <B>(</B> <I>command</I> <B>)</B> inherit the
+<B>DEBUG</B> and <B>RETURN</B> traps.
+<DT><B>6.</B>
+
+<DD>
+Error tracing is enabled: command substitution, shell functions, and
+subshells invoked with <B>(</B> <I>command</I> <B>)</B> inherit the
+<B>ERR</B> trap.
+</DL></DL>
+
+<DT><B>extglob</B>
+
+<DD>
+If set, the extended pattern matching features described above under
+<B>Pathname Expansion</B> are enabled.
+<DT><B>extquote</B>
+
+<DD>
+If set, <B>$</B>aq<I>string</I>aq and <B>$</B>&quot;<I>string</I>&quot; quoting is
+performed within <B>${</B><I>parameter</I><B>}</B> expansions
+enclosed in double quotes.  This option is enabled by default.
+<DT><B>failglob</B>
+
+<DD>
+If set, patterns which fail to match filenames during pathname expansion
+result in an expansion error.
+<DT><B>force_fignore</B>
+
+<DD>
+If set, the suffixes specified by the
+<FONT SIZE=-1><B>FIGNORE</B>
+
+</FONT>
+shell variable
+cause words to be ignored when performing word completion even if
+the ignored words are the only possible completions.
+See
+<FONT SIZE=-1><B>SHELL VARIABLES</B></FONT>
+above for a description of
+<FONT SIZE=-1><B>FIGNORE</B>.
+
+</FONT>
+This option is enabled by default.
+<DT><B>globasciiranges</B>
+
+<DD>
+If set, range expressions used in pattern matching bracket expressions (see
+<FONT SIZE=-1><B>Pattern Matching</B>
+
+</FONT>
+above) behave as if in the traditional C locale when performing
+comparisons.  That is, the current locale's collating sequence
+is not taken into account, so
+<B>b</B>
+
+will not collate between
+<B>A</B>
+
+and
+<B>B</B>,
+
+and upper-case and lower-case ASCII characters will collate together.
+<DT><B>globstar</B>
+
+<DD>
+If set, the pattern <B>**</B> used in a pathname expansion context will
+match all files and zero or more directories and subdirectories.
+If the pattern is followed by a <B>/</B>, only directories and
+subdirectories match.
+<DT><B>gnu_errfmt</B>
+
+<DD>
+If set, shell error messages are written in the standard GNU error
+message format.
+<DT><B>histappend</B>
+
+<DD>
+If set, the history list is appended to the file named by the value
+of the
+<FONT SIZE=-1><B>HISTFILE</B>
+
+</FONT>
+variable when the shell exits, rather than overwriting the file.
+<DT><B>histreedit</B>
+
+<DD>
+If set, and
+<B>readline</B>
+
+is being used, a user is given the opportunity to re-edit a
+failed history substitution.
+<DT><B>histverify</B>
+
+<DD>
+If set, and
+<B>readline</B>
+
+is being used, the results of history substitution are not immediately
+passed to the shell parser.  Instead, the resulting line is loaded into
+the <B>readline</B> editing buffer, allowing further modification.
+<DT><B>hostcomplete</B>
+
+<DD>
+If set, and
+<B>readline</B>
+
+is being used, <B>bash</B> will attempt to perform hostname completion when a
+word containing a <B>@</B> is being completed (see
+<B>Completing</B>
+
+under
+<FONT SIZE=-1><B>READLINE</B>
+
+</FONT>
+above).
+This is enabled by default.
+<DT><B>huponexit</B>
+
+<DD>
+If set, <B>bash</B> will send
+<FONT SIZE=-1><B>SIGHUP</B>
+
+</FONT>
+to all jobs when an interactive login shell exits.
+<DT><B>inherit_errexit</B>
+
+<DD>
+If set, command substitution inherits the value of the <B>errexit</B> option,
+instead of unsetting it in the subshell environment.
+This option is enabled when <I>posix mode</I> is enabled.
+<DT><B>interactive_comments</B>
+
+<DD>
+If set, allow a word beginning with
+<B>#</B>
+
+to cause that word and all remaining characters on that
+line to be ignored in an interactive shell (see
+<FONT SIZE=-1><B>COMMENTS</B>
+
+</FONT>
+above).  This option is enabled by default.
+<DT><B>lastpipe</B>
+
+<DD>
+If set, and job control is not active, the shell runs the last command of
+a pipeline not executed in the background in the current shell environment.
+<DT><B>lithist</B>
+
+<DD>
+If set, and the
+<B>cmdhist</B>
+
+option is enabled, multi-line commands are saved to the history with
+embedded newlines rather than using semicolon separators where possible.
+<DT><B>localvar_inherit</B>
+
+<DD>
+If set, local variables inherit the value and attributes of a variable of
+the same name that exists at a previous scope before any new value is
+assigned.  The nameref attribute is not inherited.
+<DT><B>localvar_unset</B>
+
+<DD>
+If set, calling <B>unset</B> on local variables in previous function scopes
+marks them so subsequent lookups find them unset until that function
+returns. This is identical to the behavior of unsetting local variables
+at the current function scope.
+<DT><B>login_shell</B>
+
+<DD>
+The shell sets this option if it is started as a login shell (see
+<FONT SIZE=-1><B>INVOCATION</B>
+
+</FONT>
+above).
+The value may not be changed.
+<DT><B>mailwarn</B>
+
+<DD>
+If set, and a file that <B>bash</B> is checking for mail has been
+accessed since the last time it was checked, the message ``The mail in
+<I>mailfile</I> has been read'' is displayed.
+<DT><B>no_empty_cmd_completion</B>
+
+<DD>
+If set, and
+<B>readline</B>
+
+is being used,
+<B>bash</B>
+
+will not attempt to search the
+<FONT SIZE=-1><B>PATH</B>
+
+</FONT>
+for possible completions when
+completion is attempted on an empty line.
+<DT><B>nocaseglob</B>
+
+<DD>
+If set,
+<B>bash</B>
+
+matches filenames in a case-insensitive fashion when performing pathname
+expansion (see
+<B>Pathname Expansion</B>
+
+above).
+<DT><B>nocasematch</B>
+
+<DD>
+If set,
+<B>bash</B>
+
+matches patterns in a case-insensitive fashion when performing matching
+while executing <B>case</B> or <B>[[</B> conditional commands,
+when performing pattern substitution word expansions,
+or when filtering possible completions as part of programmable completion.
+<DT><B>nullglob</B>
+
+<DD>
+If set,
+<B>bash</B>
+
+allows patterns which match no
+files (see
+<B>Pathname Expansion</B>
+
+above)
+to expand to a null string, rather than themselves.
+<DT><B>progcomp</B>
+
+<DD>
+If set, the programmable completion facilities (see
+<B>Programmable Completion</B> above) are enabled.
+This option is enabled by default.
+<DT><B>progcomp_alias</B>
+
+<DD>
+If set, and programmable completion is enabled, <B>bash</B> treats a command
+name that doesn't have any completions as a possible alias and attempts
+alias expansion. If it has an alias, <B>bash</B> attempts programmable
+completion using the command word resulting from the expanded alias.
+<DT><B>promptvars</B>
+
+<DD>
+If set, prompt strings undergo
+parameter expansion, command substitution, arithmetic
+expansion, and quote removal after being expanded as described in
+<FONT SIZE=-1><B>PROMPTING</B>
+
+</FONT>
+above.  This option is enabled by default.
+<DT><B>restricted_shell</B>
+
+<DD>
+The shell sets this option if it is started in restricted mode (see
+<FONT SIZE=-1><B>RESTRICTED SHELL</B>
+
+</FONT>
+below).
+The value may not be changed.
+This is not reset when the startup files are executed, allowing
+the startup files to discover whether or not a shell is restricted.
+<DT><B>shift_verbose</B>
+
+<DD>
+If set, the
+<B>shift</B>
+
+builtin prints an error message when the shift count exceeds the
+number of positional parameters.
+<DT><B>sourcepath</B>
+
+<DD>
+If set, the
+<B>source</B> (<B>.</B>) builtin uses the value of
+<FONT SIZE=-1><B>PATH</B>
+
+</FONT>
+to find the directory containing the file supplied as an argument.
+This option is enabled by default.
+<DT><B>xpg_echo</B>
+
+<DD>
+If set, the <B>echo</B> builtin expands backslash-escape sequences
+by default.
+</DL></DL>
+
+
+<DT><B>suspend</B> [<B>-f</B>]<DD>
+Suspend the execution of this shell until it receives a
+<FONT SIZE=-1><B>SIGCONT</B>
+
+</FONT>
+signal.  A login shell cannot be suspended; the
+<B>-f</B>
+
+option can be used to override this and force the suspension.
+The return status is 0 unless the shell is a login shell and
+<B>-f</B>
+
+is not supplied, or if job control is not enabled.
+<DT><B>test</B> <I>expr</I><DD>
+
+<DT><B>[</B> <I>expr</I> <B>]</B><DD>
+Return a status of 0 (true) or 1 (false) depending on
+the evaluation of the conditional expression
+<I>expr</I>.
+
+Each operator and operand must be a separate argument.
+Expressions are composed of the primaries described above under
+
+<FONT SIZE=-1><B>CONDITIONAL EXPRESSIONS</B>.
+
+</FONT>
+<B>test</B> does not accept any options, nor does it accept and ignore
+an argument of <B>--</B> as signifying the end of options.
+<P>
+
+
+Expressions may be combined using the following operators, listed
+in decreasing order of precedence.
+The evaluation depends on the number of arguments; see below.
+Operator precedence is used when there are five or more arguments.
+<DL COMPACT><DT><DD>
+
+<DL COMPACT>
+<DT><B>! </B><I>expr</I>
+
+<DD>
+True if
+<I>expr</I>
+
+is false.
+<DT><B>( </B><I>expr</I> )
+
+<DD>
+Returns the value of <I>expr</I>.
+This may be used to override the normal precedence of operators.
+<DT><I>expr1</I> -<B>a</B> <I>expr2</I><DD>
+True if both
+<I>expr1</I>
+
+and
+<I>expr2</I>
+
+are true.
+<DT><I>expr1</I> -<B>o</B> <I>expr2</I><DD>
+True if either
+<I>expr1</I>
+
+or
+<I>expr2</I>
+
+is true.
+
+</DL>
+<P>
+
+<B>test</B> and <B>[</B> evaluate conditional
+expressions using a set of rules based on the number of arguments.
+<P>
+
+
+
+<DL COMPACT>
+<DT>0 arguments<DD>
+The expression is false.
+<DT>1 argument<DD>
+The expression is true if and only if the argument is not null.
+<DT>2 arguments<DD>
+If the first argument is <B>!</B>, the expression is true if and
+only if the second argument is null.
+If the first argument is one of the unary conditional operators listed above
+under
+<FONT SIZE=-1><B>CONDITIONAL EXPRESSIONS</B>,
+
+</FONT>
+the expression is true if the unary test is true.
+If the first argument is not a valid unary conditional operator, the expression
+is false.
+<DT>3 arguments<DD>
+The following conditions are applied in the order listed.
+If the second argument is one of the binary conditional operators listed above
+under
+<FONT SIZE=-1><B>CONDITIONAL EXPRESSIONS</B>,
+
+</FONT>
+the result of the expression is the result of the binary test using
+the first and third arguments as operands.
+The <B>-a</B> and <B>-o</B> operators are considered binary operators
+when there are three arguments.
+If the first argument is <B>!</B>, the value is the negation of
+the two-argument test using the second and third arguments.
+If the first argument is exactly <B>(</B> and the third argument is
+exactly <B>)</B>, the result is the one-argument test of the second
+argument.
+Otherwise, the expression is false.
+<DT>4 arguments<DD>
+If the first argument is <B>!</B>, the result is the negation of
+the three-argument expression composed of the remaining arguments.
+Otherwise, the expression is parsed and evaluated according to
+precedence using the rules listed above.
+<DT>5 or more arguments<DD>
+The expression is parsed and evaluated according to precedence
+using the rules listed above.
+<P>
+
+
+</DL>
+<P>
+
+When used with <B>test</B> or <B>[</B>, the <B>&lt;</B> and <B>&gt;</B> operators
+sort lexicographically using ASCII ordering.
+</DL>
+
+
+<DT><B>times</B>
+
+<DD>
+Print the accumulated user and system times for the shell and
+for processes run from the shell.  The return status is 0.
+<DT><B>trap</B> [<B>-lp</B>] [[<I>arg</I>] <I>sigspec</I> ...]<DD>
+The command
+<I>arg</I>
+
+is to be read and executed when the shell receives
+signal(s)
+<I>sigspec</I>.
+
+If
+<I>arg</I>
+
+is absent (and there is a single <I>sigspec</I>) or
+<B>-</B>,
+
+each specified signal is
+reset to its original disposition (the value it had
+upon entrance to the shell).
+If
+<I>arg</I>
+
+is the null string the signal specified by each
+<I>sigspec</I>
+
+is ignored by the shell and by the commands it invokes.
+If
+<I>arg</I>
+
+is not present and
+<B>-p</B>
+
+has been supplied, then the trap commands associated with each
+<I>sigspec</I>
+
+are displayed.
+If no arguments are supplied or if only
+<B>-p</B>
+
+is given,
+<B>trap</B>
+
+prints the list of commands associated with each signal.
+The
+<B>-l</B>
+
+option causes the shell to print a list of signal names and
+their corresponding numbers.
+Each
+<I>sigspec</I>
+
+is either
+a signal name defined in &lt;<I>signal.h</I>&gt;, or a signal number.
+Signal names are case insensitive and the
+<FONT SIZE=-1><B>SIG</B>
+
+</FONT>
+prefix is optional.
+<P>
+
+
+If a
+<I>sigspec</I>
+
+is
+<FONT SIZE=-1><B>EXIT</B>
+
+</FONT>
+(0) the command
+<I>arg</I>
+
+is executed on exit from the shell.
+If a
+<I>sigspec</I>
+
+is
+<FONT SIZE=-1><B>DEBUG</B>,
+
+</FONT>
+the command
+<I>arg</I>
+
+is executed before every <I>simple command</I>, <I>for</I> command,
+<I>case</I> command, <I>select</I> command, every arithmetic <I>for</I>
+command, and before the first command executes in a shell function (see
+<FONT SIZE=-1><B>SHELL GRAMMAR</B>
+
+</FONT>
+above).
+Refer to the description of the <B>extdebug</B> option to the
+<B>shopt</B> builtin for details of its effect on the <B>DEBUG</B> trap.
+If a
+<I>sigspec</I>
+
+is
+<FONT SIZE=-1><B>RETURN</B>,
+
+</FONT>
+the command
+<I>arg</I>
+
+is executed each time a shell function or a script executed with
+the <B>.</B> or <B>source</B> builtins finishes executing.
+<P>
+
+
+If a
+<I>sigspec</I>
+
+is
+<FONT SIZE=-1><B>ERR</B>,
+
+</FONT>
+the command
+<I>arg</I>
+
+is executed whenever
+a pipeline (which may consist of a single simple
+command), a list, or a compound command returns a
+non-zero exit status,
+subject to the following conditions.
+The
+<FONT SIZE=-1><B>ERR</B>
+
+</FONT>
+trap is not executed if the failed
+command is part of the command list immediately following a
+<B>while</B>
+
+or
+<B>until</B>
+
+keyword,
+part of the test in an
+<I>if</I>
+
+statement, part of a command executed in a
+<B>&amp;&amp;</B>
+
+or
+<B>||</B>
+
+list except the command following the final <B>&amp;&amp;</B> or <B>||</B>,
+any command in a pipeline but the last,
+or if the command's return value is
+being inverted using
+<B>!</B>.
+
+These are the same conditions obeyed by the <B>errexit</B> (<B>-e</B>) option.
+<P>
+
+
+Signals ignored upon entry to the shell cannot be trapped or reset.
+Trapped signals that are not being ignored are reset to their original
+values in a subshell or subshell environment when one is created.
+The return status is false if any
+<I>sigspec</I>
+
+is invalid; otherwise
+<B>trap</B>
+
+returns true.
+<DT><B>type</B> [<B>-aftpP</B>] <I>name</I> [<I>name</I> ...]<DD>
+With no options,
+indicate how each
+<I>name</I>
+
+would be interpreted if used as a command name.
+If the
+<B>-t</B>
+
+option is used,
+<B>type</B>
+
+prints a string which is one of
+<I>alias</I>,
+
+<I>keyword</I>,
+
+<I>function</I>,
+
+<I>builtin</I>,
+
+or
+<I>file</I>
+
+if
+<I>name</I>
+
+is an alias, shell reserved word, function, builtin, or disk file,
+respectively.
+If the
+<I>name</I>
+
+is not found, then nothing is printed, and an exit status of false
+is returned.
+If the
+<B>-p</B>
+
+option is used,
+<B>type</B>
+
+either returns the name of the disk file
+that would be executed if
+<I>name</I>
+
+were specified as a command name,
+or nothing if
+<TT>type -t name</TT>
+
+would not return
+<I>file</I>.
+
+The
+<B>-P</B>
+
+option forces a
+<FONT SIZE=-1><B>PATH</B>
+
+</FONT>
+search for each <I>name</I>, even if
+<TT>type -t name</TT>
+
+would not return
+<I>file</I>.
+
+If a command is hashed,
+<B>-p</B>
+
+and
+<B>-P</B>
+
+print the hashed value, which is not necessarily the file that appears
+first in
+<FONT SIZE=-1><B>PATH</B>.
+
+</FONT>
+If the
+<B>-a</B>
+
+option is used,
+<B>type</B>
+
+prints all of the places that contain
+an executable named
+<I>name</I>.
+
+This includes aliases and functions,
+if and only if the
+<B>-p</B>
+
+option is not also used.
+The table of hashed commands is not consulted
+when using
+<B>-a</B>.
+
+The
+<B>-f</B>
+
+option suppresses shell function lookup, as with the <B>command</B> builtin.
+<B>type</B>
+
+returns true if all of the arguments are found, false if
+any are not found.
+<DT><B>ulimit</B> [<B>-HS</B>] <B>-a</B><DD>
+
+<DT><B>ulimit</B> [<B>-HS</B>] [<B>-bcdefiklmnpqrstuvxPRT</B> [<I>limit</I>]]<DD>
+
+Provides control over the resources available to the shell and to
+processes started by it, on systems that allow such control.
+The <B>-H</B> and <B>-S</B> options specify that the hard or soft limit is
+set for the given resource.
+A hard limit cannot be increased by a non-root user once it is set;
+a soft limit may be increased up to the value of the hard limit.
+If neither <B>-H</B> nor <B>-S</B> is specified, both the soft and hard
+limits are set.
+The value of
+<I>limit</I>
+
+can be a number in the unit specified for the resource
+or one of the special values
+<B>hard</B>,
+
+<B>soft</B>,
+
+or
+<B>unlimited</B>,
+
+which stand for the current hard limit, the current soft limit, and
+no limit, respectively.
+If
+<I>limit</I>
+
+is omitted, the current value of the soft limit of the resource is
+printed, unless the <B>-H</B> option is given.  When more than one
+resource is specified, the limit name and unit, if appropriate,
+are printed before the value.
+Other options are interpreted as follows:
+<DL COMPACT><DT><DD>
+
+<DL COMPACT>
+<DT><B>-a</B>
+
+<DD>
+All current limits are reported; no limits are set
+<DT><B>-b</B>
+
+<DD>
+The maximum socket buffer size
+<DT><B>-c</B>
+
+<DD>
+The maximum size of core files created
+<DT><B>-d</B>
+
+<DD>
+The maximum size of a process's data segment
+<DT><B>-e</B>
+
+<DD>
+The maximum scheduling priority (&quot;nice&quot;)
+<DT><B>-f</B>
+
+<DD>
+The maximum size of files written by the shell and its children
+<DT><B>-i</B>
+
+<DD>
+The maximum number of pending signals
+<DT><B>-k</B>
+
+<DD>
+The maximum number of kqueues that may be allocated
+<DT><B>-l</B>
+
+<DD>
+The maximum size that may be locked into memory
+<DT><B>-m</B>
+
+<DD>
+The maximum resident set size (many systems do not honor this limit)
+<DT><B>-n</B>
+
+<DD>
+The maximum number of open file descriptors (most systems do not
+allow this value to be set)
+<DT><B>-p</B>
+
+<DD>
+The pipe size in 512-byte blocks (this may not be set)
+<DT><B>-q</B>
+
+<DD>
+The maximum number of bytes in POSIX message queues
+<DT><B>-r</B>
+
+<DD>
+The maximum real-time scheduling priority
+<DT><B>-s</B>
+
+<DD>
+The maximum stack size
+<DT><B>-t</B>
+
+<DD>
+The maximum amount of cpu time in seconds
+<DT><B>-u</B>
+
+<DD>
+The maximum number of processes available to a single user
+<DT><B>-v</B>
+
+<DD>
+The maximum amount of virtual memory available to the shell and, on
+some systems, to its children
+<DT><B>-x</B>
+
+<DD>
+The maximum number of file locks
+<DT><B>-P</B>
+
+<DD>
+The maximum number of pseudoterminals
+<DT><B>-R</B>
+
+<DD>
+The maximum time a real-time process can run before blocking, in microseconds
+<DT><B>-T</B>
+
+<DD>
+The maximum number of threads
+
+</DL>
+<P>
+
+If
+<I>limit</I>
+
+is given, and the
+<B>-a</B>
+
+option is not used,
+<I>limit</I> is the new value of the specified resource.
+If no option is given, then
+<B>-f</B>
+
+is assumed.  Values are in 1024-byte increments, except for
+<B>-t</B>,
+
+which is in seconds;
+<B>-R</B>,
+
+which is in microseconds;
+<B>-p</B>,
+
+which is in units of 512-byte blocks;
+<B>-P</B>,
+
+<B>-T</B>,
+
+<B>-b</B>,
+
+<B>-k</B>,
+
+<B>-n</B>,
+
+and
+<B>-u</B>,
+
+which are unscaled values;
+and, when in posix mode,
+<B>-c</B>
+
+and
+<B>-f</B>,
+
+which are in 512-byte increments.
+The return status is 0 unless an invalid option or argument is supplied,
+or an error occurs while setting a new limit.
+</DL>
+
+<DT><B>umask</B> [<B>-p</B>] [<B>-S</B>] [<I>mode</I>]<DD>
+The user file-creation mask is set to
+<I>mode</I>.
+
+If
+<I>mode</I>
+
+begins with a digit, it
+is interpreted as an octal number; otherwise
+it is interpreted as a symbolic mode mask similar
+to that accepted by
+<I>chmod</I>(1).
+
+If
+<I>mode</I>
+
+is omitted, the current value of the mask is printed.
+The
+<B>-S</B>
+
+option causes the mask to be printed in symbolic form; the
+default output is an octal number.
+If the
+<B>-p</B>
+
+option is supplied, and
+<I>mode</I>
+
+is omitted, the output is in a form that may be reused as input.
+The return status is 0 if the mode was successfully changed or if
+no <I>mode</I> argument was supplied, and false otherwise.
+<DT><B>unalias</B> [-<B>a</B>] [<I>name</I> ...]<DD>
+Remove each <I>name</I> from the list of defined aliases.  If
+<B>-a</B>
+
+is supplied, all alias definitions are removed.  The return
+value is true unless a supplied
+<I>name</I>
+
+is not a defined alias.
+<DT><B>unset</B> [-<B>fv</B>] [-<B>n</B>] [<I>name</I> ...]<DD>
+For each
+<I>name</I>,
+
+remove the corresponding variable or function.
+If the
+<B>-v</B>
+
+option is given, each
+<I>name</I>
+
+refers to a shell variable, and that variable is removed.
+Read-only variables may not be unset.
+If
+<B>-f</B>
+
+is specified, each
+<I>name</I>
+
+refers to a shell function, and the function definition
+is removed.
+If the
+<B>-n</B>
+
+option is supplied, and <I>name</I> is a variable with the <I>nameref</I>
+attribute, <I>name</I> will be unset rather than the variable it
+references.
+<B>-n</B> has no effect if the <B>-f</B> option is supplied.
+If no options are supplied, each <I>name</I> refers to a variable; if
+there is no variable by that name, a function with that name, if any, is
+unset.
+Each unset variable or function is removed from the environment
+passed to subsequent commands.
+If any of
+<FONT SIZE=-1><B>BASH_ALIASES</B>,
+
+</FONT>
+<FONT SIZE=-1><B>BASH_ARGV0</B>,
+
+</FONT>
+<FONT SIZE=-1><B>BASH_CMDS</B>,
+
+</FONT>
+<FONT SIZE=-1><B>BASH_COMMAND</B>,
+
+</FONT>
+<FONT SIZE=-1><B>BASH_SUBSHELL</B>,
+
+</FONT>
+<FONT SIZE=-1><B>BASHPID</B>,
+
+</FONT>
+<FONT SIZE=-1><B>COMP_WORDBREAKS</B>,
+
+</FONT>
+<FONT SIZE=-1><B>DIRSTACK</B>,
+
+</FONT>
+<FONT SIZE=-1><B>EPOCHREALTIME</B>,
+
+</FONT>
+<FONT SIZE=-1><B>EPOCHSECONDS</B>,
+
+</FONT>
+<FONT SIZE=-1><B>FUNCNAME</B>,
+
+</FONT>
+<FONT SIZE=-1><B>GROUPS</B>,
+
+</FONT>
+<FONT SIZE=-1><B>HISTCMD</B>,
+
+</FONT>
+<FONT SIZE=-1><B>LINENO</B>,
+
+</FONT>
+<FONT SIZE=-1><B>RANDOM</B>,
+
+</FONT>
+<FONT SIZE=-1><B>SECONDS</B>,
+
+</FONT>
+or
+<FONT SIZE=-1><B>SRANDOM</B>
+
+</FONT>
+are unset, they lose their special properties, even if they are
+subsequently reset.  The exit status is true unless a
+<I>name</I>
+
+is readonly.
+<DT><B>wait</B> [<B>-fn</B>] [-p <I>varname</I>] [<I>id ...</I>]<DD>
+Wait for each specified child process and return its termination status.
+Each
+<I>id</I>
+
+may be a process
+ID or a job specification; if a job spec is given, all processes
+in that job's pipeline are waited for.  If
+<I>id</I>
+
+is not given,
+<B>wait</B> waits for all running background jobs and
+the last-executed process substitution, if its process id is the same as
+<B>$!</B>,
+and the return status is zero.
+If the <B>-n</B> option is supplied,
+<B>wait</B> waits for a single job
+from the list of <I>id</I>s or, if no <I>id</I>s are supplied, any job,
+to complete and returns its exit status.
+If none of the supplied arguments is a child of the shell, or if no arguments
+are supplied and the shell has no unwaited-for children, the exit status
+is 127.
+If the <B>-p</B> option is supplied, the process or job identifier of the job
+for which the exit status is returned is assigned to the variable
+<I>varname</I> named by the option argument.
+The variable will be unset initially, before any assignment.
+This is useful only when the <B>-n</B> option is supplied.
+Supplying the <B>-f</B> option, when job control is enabled,
+forces <B>wait</B> to wait for <I>id</I> to terminate before returning
+its status, instead of returning when it changes status.
+If
+<I>id</I>
+
+specifies a non-existent process or job, the return status is
+127.  Otherwise, the return status is the exit status of the last
+process or job waited for.
+</DL>
+<A NAME="lbDC">&nbsp;</A>
+<H3>SHELL COMPATIBILITY MODE</H3>
+
+Bash-4.0 introduced the concept of a `shell compatibility level', specified
+as a set of options to the shopt builtin
+<B>compat31</B>,
+
+<B>compat32</B>,
+
+<B>compat40</B>,
+
+<B>compat41</B>,
+
+and so on).
+There is only one current
+compatibility level -- each option is mutually exclusive.
+The compatibility level is intended to allow users to select behavior
+from previous versions that is incompatible with newer versions
+while they migrate scripts to use current features and
+behavior. It's intended to be a temporary solution.
+<P>
+
+This section does not mention behavior that is standard for a particular
+version (e.g., setting <B>compat32</B> means that quoting the rhs of the regexp
+matching operator quotes special regexp characters in the word, which is
+default behavior in bash-3.2 and above). 
+<P>
+
+If a user enables, say, <B>compat32</B>, it may affect the behavior of other
+compatibility levels up to and including the current compatibility level.
+The idea is that each compatibility level controls behavior that changed
+in that version of <B>bash</B>,
+but that behavior may have been present in earlier versions.
+For instance, the change to use locale-based comparisons with the <B>[[</B>
+command came in bash-4.1, and earlier versions used ASCII-based comparisons,
+so enabling <B>compat32</B> will enable ASCII-based comparisons as well.
+That granularity may not be sufficient for
+all uses, and as a result users should employ compatibility levels carefully.
+Read the documentation for a particular feature to find out the
+current behavior.
+<P>
+
+Bash-4.3 introduced a new shell variable:
+<FONT SIZE=-1><B>BASH_COMPAT</B>.
+
+</FONT>
+The value assigned
+to this variable (a decimal version number like 4.2, or an integer
+corresponding to the <B>compat</B><I>NN</I> option, like 42) determines the
+compatibility level.
+<P>
+
+Starting with bash-4.4, Bash has begun deprecating older compatibility
+levels.
+Eventually, the options will be removed in favor of
+<FONT SIZE=-1><B>BASH_COMPAT</B>.
+
+</FONT>
+<P>
+
+Bash-5.0 is the final version for which there will be an individual shopt
+option for the previous version. Users should use
+<FONT SIZE=-1><B>BASH_COMPAT</B>
+
+</FONT>
+on bash-5.0 and later versions.
+<P>
+
+The following table describes the behavior changes controlled by each
+compatibility level setting.
+The <B>compat</B><I>NN</I> tag is used as shorthand for setting the
+compatibility level
+to <I>NN</I> using one of the following mechanisms.
+For versions prior to bash-5.0, the compatibility level may be set using
+the corresponding <B>compat</B><I>NN</I> shopt option.
+For bash-4.3 and later versions, the
+<FONT SIZE=-1><B>BASH_COMPAT</B>
+
+</FONT>
+variable is preferred,
+and it is required for bash-5.1 and later versions.
+<DL COMPACT>
+<DT><B>compat31</B><DD>
+
+<DL COMPACT><DT><DD>
+<DL COMPACT>
+<DT>*<DD>
+quoting the rhs of the <B>[[</B> command's regexp matching operator (=~)
+has no special effect
+</DL></DL>
+
+
+<DT><B>compat32</B><DD>
+
+<DL COMPACT><DT><DD>
+<DL COMPACT>
+<DT>*<DD>
+interrupting a command list such as &quot;a ; b ; c&quot; causes the execution
+of the next command in the list (in bash-4.0 and later versions,
+the shell acts as if it received the interrupt, so
+interrupting one command in a list aborts the execution of the
+entire list)
+</DL></DL>
+
+
+<DT><B>compat40</B><DD>
+
+<DL COMPACT><DT><DD>
+<DL COMPACT>
+<DT>*<DD>
+the <B>&lt;</B> and <B>&gt;</B> operators to the <B>[[</B> command do not
+consider the current locale when comparing strings; they use ASCII
+ordering.
+Bash versions prior to bash-4.1 use ASCII collation and
+<I>strcmp</I>(3);
+
+bash-4.1 and later use the current locale's collation sequence and
+<I>strcoll</I>(3).
+
+</DL></DL>
+
+
+<DT><B>compat41</B><DD>
+
+<DL COMPACT><DT><DD>
+<DL COMPACT>
+<DT>*<DD>
+in <I>posix</I> mode, <B>time</B> may be followed by options and still be
+recognized as a reserved word (this is POSIX interpretation 267)
+<DT>*<DD>
+in <I>posix</I> mode, the parser requires that an even number of single
+quotes occur in the <I>word</I> portion of a double-quoted
+parameter expansion and treats them specially, so that characters within
+the single quotes are considered quoted
+(this is POSIX interpretation 221)
+</DL></DL>
+
+
+<DT><B>compat42</B><DD>
+
+<DL COMPACT><DT><DD>
+<DL COMPACT>
+<DT>*<DD>
+the replacement string in double-quoted pattern substitution does not
+undergo quote removal, as it does in versions after bash-4.2
+<DT>*<DD>
+in posix mode, single quotes are considered special when expanding
+the <I>word</I> portion of a double-quoted parameter expansion
+and can be used to quote a closing brace or other special character
+(this is part of POSIX interpretation 221);
+in later versions, single quotes
+are not special within double-quoted word expansions
+</DL></DL>
+
+
+<DT><B>compat43</B><DD>
+
+<DL COMPACT><DT><DD>
+<DL COMPACT>
+<DT>*<DD>
+the shell does not print a warning message if an attempt is made to
+use a quoted compound assignment as an argument to declare
+(declare -a foo='(1 2)'). Later versions warn that this usage is
+deprecated
+<DT>*<DD>
+word expansion errors are considered non-fatal errors that cause the
+current command to fail, even in posix mode
+(the default behavior is to make them fatal errors that cause the shell
+to exit)
+<DT>*<DD>
+when executing a shell function, the loop state (while/until/etc.)
+is not reset, so <B>break</B> or <B>continue</B> in that function will break
+or continue loops in the calling context. Bash-4.4 and later reset
+the loop state to prevent this
+</DL></DL>
+
+
+<DT><B>compat44</B><DD>
+
+<DL COMPACT><DT><DD>
+<DL COMPACT>
+<DT>*<DD>
+the shell sets up the values used by
+<FONT SIZE=-1><B>BASH_ARGV</B>
+
+</FONT>
+and
+<FONT SIZE=-1><B>BASH_ARGC</B>
+
+</FONT>
+so they can expand to the shell's positional parameters even if extended
+debugging mode is not enabled
+<DT>*<DD>
+a subshell inherits loops from its parent context, so <B>break</B>
+or <B>continue</B> will cause the subshell to exit.
+Bash-5.0 and later reset the loop state to prevent the exit
+<DT>*<DD>
+variable assignments preceding builtins like <B>export</B> and <B>readonly</B>
+that set attributes continue to affect variables with the same
+name in the calling environment even if the shell is not in posix
+mode
+</DL></DL>
+
+
+<DT><B>compat50</B><DD>
+
+<DL COMPACT><DT><DD>
+<DL COMPACT>
+<DT>*<DD>
+Bash-5.1 changed the way
+<FONT SIZE=-1><B>$RANDOM</B>
+
+</FONT>
+is generated to introduce slightly
+more randomness. If the shell compatibility level is set to 50 or
+lower, it reverts to the method from bash-5.0 and previous versions,
+so seeding the random number generator by assigning a value to
+<FONT SIZE=-1><B>RANDOM</B>
+
+</FONT>
+will produce the same sequence as in bash-5.0
+<DT>*<DD>
+If the command hash table is empty, bash versions prior to bash-5.1
+printed an informational message to that effect, even when producing
+output that can be reused as input. Bash-5.1 suppresses that message
+when the <B>-l</B> option is supplied.
+</DL></DL>
+
+
+
+
+</DL>
+<A NAME="lbDD">&nbsp;</A>
+<H3>RESTRICTED SHELL</H3>
+
+
+
+<P>
+
+If
+<B>bash</B>
+
+is started with the name
+<B>rbash</B>,
+
+or the
+<B>-r</B>
+
+option is supplied at invocation,
+the shell becomes restricted.
+A restricted shell is used to
+set up an environment more controlled than the standard shell.
+It behaves identically to
+<B>bash</B>
+
+with the exception that the following are disallowed or not performed:
+<DL COMPACT>
+<DT>*<DD>
+changing directories with <B>cd</B>
+<DT>*<DD>
+setting or unsetting the values of
+<FONT SIZE=-1><B>SHELL</B>,
+
+</FONT>
+<FONT SIZE=-1><B>PATH</B>,
+
+</FONT>
+<FONT SIZE=-1><B>HISTFILE</B>,
+
+</FONT>
+<FONT SIZE=-1><B>ENV</B>,
+
+</FONT>
+or
+<FONT SIZE=-1><B>BASH_ENV</B>
+
+</FONT>
+<DT>*<DD>
+specifying command names containing
+<B>/</B>
+
+<DT>*<DD>
+specifying a filename containing a
+<B>/</B>
+
+as an argument to the
+<B>.</B>
+
+builtin command
+<DT>*<DD>
+specifying a filename containing a slash as an argument to the
+<B>history</B>
+
+builtin command
+<DT>*<DD>
+specifying a filename containing a slash as an argument to the
+<B>-p</B>
+
+option to the
+<B>hash</B>
+
+builtin command
+<DT>*<DD>
+importing function definitions from the shell environment at startup
+<DT>*<DD>
+parsing the value of
+<FONT SIZE=-1><B>SHELLOPTS</B>
+
+</FONT>
+from the shell environment at startup
+<DT>*<DD>
+redirecting output using the &gt;, &gt;|, &lt;&gt;, &gt;&amp;, &amp;&gt;, and &gt;&gt; redirection operators
+<DT>*<DD>
+using the
+<B>exec</B>
+
+builtin command to replace the shell with another command
+<DT>*<DD>
+adding or deleting builtin commands with the
+<B>-f</B>
+
+and
+<B>-d</B>
+
+options to the
+<B>enable</B>
+
+builtin command
+<DT>*<DD>
+using the <B>enable</B> builtin command to enable disabled shell builtins
+<DT>*<DD>
+specifying the
+<B>-p</B>
+
+option to the
+<B>command</B>
+
+builtin command
+<DT>*<DD>
+turning off restricted mode with
+<B>set +r</B> or <B>set +o restricted</B>.
+</DL>
+<P>
+
+These restrictions are enforced after any startup files are read.
+<P>
+
+
+ When a command that is found to be a shell script is executed
+(see
+<FONT SIZE=-1><B>COMMAND EXECUTION</B>
+
+</FONT>
+
+above),
+
+<B>rbash</B>
+
+turns off any restrictions in the shell spawned to execute the
+script.
+
+
+<A NAME="lbDE">&nbsp;</A>
+<H3>SEE ALSO</H3>
+
+
+<DL COMPACT>
+<DT><I>Bash Reference Manual</I>, Brian Fox and Chet Ramey<DD>
+<DT><I>The Gnu Readline Library</I>, Brian Fox and Chet Ramey<DD>
+<DT><I>The Gnu History Library</I>, Brian Fox and Chet Ramey<DD>
+<DT><I>Portable Operating System Interface (POSIX) Part 2: Shell and Utilities</I>, IEEE --<DD>
+<A HREF="http://pubs.opengroup.org/onlinepubs/9699919799/">http://pubs.opengroup.org/onlinepubs/9699919799/</A>
+<DT><A HREF="http://tiswww.case.edu/~chet/bash/POSIX">http://tiswww.case.edu/~chet/bash/POSIX</A> -- a description of posix mode<DD>
+<DT><I>sh</I>(1), <I>ksh</I>(1), <I>csh</I>(1)<DD>
+<DT><I>emacs</I>(1), <I>vi</I>(1)<DD>
+<DT><I>readline</I>(3)<DD>
+
+</DL>
+<A NAME="lbDF">&nbsp;</A>
+<H3>FILES</H3>
+
+
+<DL COMPACT>
+<DT>
+<A HREF="file:/bin/bash"><I>/bin/bash</I></A>
+
+<DD>
+The <B>bash</B> executable
+<DT>
+<A HREF="file:/etc/profile"><I>/etc/profile</I></A>
+
+<DD>
+The systemwide initialization file, executed for login shells
+<DT>
+<A HREF="file:~/.bash_profile"><I>~/.bash_profile</I></A>
+
+<DD>
+The personal initialization file, executed for login shells
+<DT>
+<A HREF="file:~/.bashrc"><I>~/.bashrc</I></A>
+
+<DD>
+The individual per-interactive-shell startup file
+<DT>
+<A HREF="file:~/.bash_logout"><I>~/.bash_logout</I></A>
+
+<DD>
+The individual login shell cleanup file, executed when a login shell exits
+<DT>
+<A HREF="file:~/.inputrc"><I>~/.inputrc</I></A>
+
+<DD>
+Individual <I>readline</I> initialization file
+
+</DL>
+<A NAME="lbDG">&nbsp;</A>
+<H3>AUTHORS</H3>
+
+Brian Fox, Free Software Foundation
+<BR>
+
+<A HREF="mailto:bfox@gnu.org">bfox@gnu.org</A>
+<P>
+
+Chet Ramey, Case Western Reserve University
+<BR>
+
+<A HREF="mailto:chet.ramey@case.edu">chet.ramey@case.edu</A>
+<A NAME="lbDH">&nbsp;</A>
+<H3>BUG REPORTS</H3>
+
+If you find a bug in
+<B>bash,</B>
+
+you should report it.  But first, you should
+make sure that it really is a bug, and that it appears in the latest
+version of
+<B>bash</B>.
+
+The latest version is always available from
+<I><A HREF="ftp://ftp.gnu.org/pub/gnu/bash/">ftp://ftp.gnu.org/pub/gnu/bash/</A></I>.
+<P>
+
+Once you have determined that a bug actually exists, use the
+<I>bashbug</I>
+
+command to submit a bug report.
+If you have a fix, you are encouraged to mail that as well!
+Suggestions and `philosophical' bug reports may be mailed
+to <I><A HREF="mailto:bug-bash@gnu.org">bug-bash@gnu.org</A></I> or posted to the Usenet
+newsgroup
+<A HREF="news:gnu.bash.bug">gnu.bash.bug</A>.
+
+<P>
+
+ALL bug reports should include:
+<P>
+
+
+<DL COMPACT>
+<DT>The version number of <B>bash</B><DD>
+<DT>The hardware and operating system<DD>
+<DT>The compiler used to compile<DD>
+<DT>A description of the bug behaviour<DD>
+<DT>A short script or `recipe' which exercises the bug<DD>
+
+</DL>
+<P>
+
+<I>bashbug</I>
+
+inserts the first three items automatically into the template
+it provides for filing a bug report.
+<P>
+
+Comments and bug reports concerning
+this manual page should be directed to
+<I><A HREF="mailto:chet.ramey@case.edu">chet.ramey@case.edu</A></I>.
+
+<A NAME="lbDI">&nbsp;</A>
+<H3>BUGS</H3>
+
+It's too big and too slow.
+<P>
+
+There are some subtle differences between
+<B>bash</B>
+
+and traditional versions of
+<B>sh</B>,
+
+mostly because of the
+<FONT SIZE=-1><B>POSIX</B>
+
+</FONT>
+specification.
+<P>
+
+Aliases are confusing in some uses.
+<P>
+
+Shell builtin commands and functions are not stoppable/restartable.
+<P>
+
+Compound commands and command sequences of the form `a ; b ; c'
+are not handled gracefully when process suspension is attempted.
+When a process is stopped, the shell immediately executes the next
+command in the sequence.
+It suffices to place the sequence of commands between
+parentheses to force it into a subshell, which may be stopped as
+a unit.
+<P>
+
+Array variables may not (yet) be exported.
+<P>
+
+There may be only one active coprocess at a time.
+
+
+
+<HR>
+<TABLE WIDTH=100%>
+<TR>
+<TH ALIGN=LEFT width=33%>GNU Bash 5.1<TH ALIGN=CENTER width=33%>2020 October 29<TH ALIGN=RIGHT width=33%>BASH(1)
+</TR>
+</TABLE>
+<HR>
+<A NAME="index">&nbsp;</A><H2>Index</H2>
+<DL>
+<DT><A HREF="#lbAB">NAME</A><DD>
+<DT><A HREF="#lbAC">SYNOPSIS</A><DD>
+<DT><A HREF="#lbAD">COPYRIGHT</A><DD>
+<DT><A HREF="#lbAE">DESCRIPTION</A><DD>
+<DT><A HREF="#lbAF">OPTIONS</A><DD>
+<DT><A HREF="#lbAG">ARGUMENTS</A><DD>
+<DT><A HREF="#lbAH">INVOCATION</A><DD>
+<DT><A HREF="#lbAI">DEFINITIONS</A><DD>
+<DT><A HREF="#lbAJ">RESERVED WORDS</A><DD>
+<DT><A HREF="#lbAK">SHELL GRAMMAR</A><DD>
+<DL>
+<DT><A HREF="#lbAL">Simple Commands</A><DD>
+<DT><A HREF="#lbAM">Pipelines</A><DD>
+<DT><A HREF="#lbAN">Lists</A><DD>
+<DT><A HREF="#lbAO">Compound Commands</A><DD>
+<DT><A HREF="#lbAP">Coprocesses</A><DD>
+<DT><A HREF="#lbAQ">Shell Function Definitions</A><DD>
+</DL>
+<DT><A HREF="#lbAR">COMMENTS</A><DD>
+<DT><A HREF="#lbAS">QUOTING</A><DD>
+<DT><A HREF="#lbAT">PARAMETERS</A><DD>
+<DL>
+<DT><A HREF="#lbAU">Positional Parameters</A><DD>
+<DT><A HREF="#lbAV">Special Parameters</A><DD>
+<DT><A HREF="#lbAW">Shell Variables</A><DD>
+<DT><A HREF="#lbAX">Arrays</A><DD>
+</DL>
+<DT><A HREF="#lbAY">EXPANSION</A><DD>
+<DL>
+<DT><A HREF="#lbAZ">Brace Expansion</A><DD>
+<DT><A HREF="#lbBA">Tilde Expansion</A><DD>
+<DT><A HREF="#lbBB">Parameter Expansion</A><DD>
+<DT><A HREF="#lbBC">Command Substitution</A><DD>
+<DT><A HREF="#lbBD">Arithmetic Expansion</A><DD>
+<DT><A HREF="#lbBE">Process Substitution</A><DD>
+<DT><A HREF="#lbBF">Word Splitting</A><DD>
+<DT><A HREF="#lbBG">Pathname Expansion</A><DD>
+<DT><A HREF="#lbBH">Quote Removal</A><DD>
+</DL>
+<DT><A HREF="#lbBI">REDIRECTION</A><DD>
+<DL>
+<DT><A HREF="#lbBJ">Redirecting Input</A><DD>
+<DT><A HREF="#lbBK">Redirecting Output</A><DD>
+<DT><A HREF="#lbBL">Appending Redirected Output</A><DD>
+<DT><A HREF="#lbBM">Redirecting Standard Output and Standard Error</A><DD>
+<DT><A HREF="#lbBN">Appending Standard Output and Standard Error</A><DD>
+<DT><A HREF="#lbBO">Here Documents</A><DD>
+<DT><A HREF="#lbBP">Here Strings</A><DD>
+<DT><A HREF="#lbBQ">Duplicating File Descriptors</A><DD>
+<DT><A HREF="#lbBR">Moving File Descriptors</A><DD>
+<DT><A HREF="#lbBS">Opening File Descriptors for Reading and Writing</A><DD>
+</DL>
+<DT><A HREF="#lbBT">ALIASES</A><DD>
+<DT><A HREF="#lbBU">FUNCTIONS</A><DD>
+<DT><A HREF="#lbBV">ARITHMETIC EVALUATION</A><DD>
+<DT><A HREF="#lbBW">CONDITIONAL EXPRESSIONS</A><DD>
+<DT><A HREF="#lbBX">SIMPLE COMMAND EXPANSION</A><DD>
+<DT><A HREF="#lbBY">COMMAND EXECUTION</A><DD>
+<DT><A HREF="#lbBZ">COMMAND EXECUTION ENVIRONMENT</A><DD>
+<DT><A HREF="#lbCA">ENVIRONMENT</A><DD>
+<DT><A HREF="#lbCB">EXIT STATUS</A><DD>
+<DT><A HREF="#lbCC">SIGNALS</A><DD>
+<DT><A HREF="#lbCD">JOB CONTROL</A><DD>
+<DT><A HREF="#lbCE">PROMPTING</A><DD>
+<DT><A HREF="#lbCF">READLINE</A><DD>
+<DL>
+<DT><A HREF="#lbCG">Readline Notation</A><DD>
+<DT><A HREF="#lbCH">Readline Initialization</A><DD>
+<DT><A HREF="#lbCI">Readline Key Bindings</A><DD>
+<DT><A HREF="#lbCJ">Readline Variables</A><DD>
+<DT><A HREF="#lbCK">Readline Conditional Constructs</A><DD>
+<DT><A HREF="#lbCL">Searching</A><DD>
+<DT><A HREF="#lbCM">Readline Command Names</A><DD>
+<DT><A HREF="#lbCN">Commands for Moving</A><DD>
+<DT><A HREF="#lbCO">Commands for Manipulating the History</A><DD>
+<DT><A HREF="#lbCP">Commands for Changing Text</A><DD>
+<DT><A HREF="#lbCQ">Killing and Yanking</A><DD>
+<DT><A HREF="#lbCR">Numeric Arguments</A><DD>
+<DT><A HREF="#lbCS">Completing</A><DD>
+<DT><A HREF="#lbCT">Keyboard Macros</A><DD>
+<DT><A HREF="#lbCU">Miscellaneous</A><DD>
+<DT><A HREF="#lbCV">Programmable Completion</A><DD>
+</DL>
+<DT><A HREF="#lbCW">HISTORY</A><DD>
+<DT><A HREF="#lbCX">HISTORY EXPANSION</A><DD>
+<DL>
+<DT><A HREF="#lbCY">Event Designators</A><DD>
+<DT><A HREF="#lbCZ">Word Designators</A><DD>
+<DT><A HREF="#lbDA">Modifiers</A><DD>
+</DL>
+<DT><A HREF="#lbDB">SHELL BUILTIN COMMANDS</A><DD>
+<DT><A HREF="#lbDC">SHELL COMPATIBILITY MODE</A><DD>
+<DT><A HREF="#lbDD">RESTRICTED SHELL</A><DD>
+<DT><A HREF="#lbDE">SEE ALSO</A><DD>
+<DT><A HREF="#lbDF">FILES</A><DD>
+<DT><A HREF="#lbDG">AUTHORS</A><DD>
+<DT><A HREF="#lbDH">BUG REPORTS</A><DD>
+<DT><A HREF="#lbDI">BUGS</A><DD>
+</DL>
+<HR>
+This document was created by man2html from bash.1.<BR>
+Time: 18 November 2020 15:13:09 EST
+</BODY>
+</HTML>
diff --git a/doc/bash.info b/doc/bash.info
new file mode 100644
index 0000000..2fd137a
--- /dev/null
+++ b/doc/bash.info
@@ -0,0 +1,12123 @@
+This is bash.info, produced by makeinfo version 6.7 from
+bashref.texi.
+
+This text is a brief description of the features that are present in the
+Bash shell (version 5.1, 29 October 2020).
+
+   This is Edition 5.1, last updated 29 October 2020, of 'The GNU Bash
+Reference Manual', for 'Bash', Version 5.1.
+
+   Copyright (C) 1988-2020 Free Software Foundation, Inc.
+
+     Permission is granted to copy, distribute and/or modify this
+     document under the terms of the GNU Free Documentation License,
+     Version 1.3 or any later version published by the Free Software
+     Foundation; with no Invariant Sections, no Front-Cover Texts, and
+     no Back-Cover Texts.  A copy of the license is included in the
+     section entitled "GNU Free Documentation License".
+INFO-DIR-SECTION Basics
+START-INFO-DIR-ENTRY
+* Bash: (bash).                     The GNU Bourne-Again SHell.
+END-INFO-DIR-ENTRY
+
+
+File: bash.info,  Node: Top,  Next: Introduction,  Prev: (dir),  Up: (dir)
+
+Bash Features
+*************
+
+This text is a brief description of the features that are present in the
+Bash shell (version 5.1, 29 October 2020).  The Bash home page is
+<http://www.gnu.org/software/bash/>.
+
+   This is Edition 5.1, last updated 29 October 2020, of 'The GNU Bash
+Reference Manual', for 'Bash', Version 5.1.
+
+   Bash contains features that appear in other popular shells, and some
+features that only appear in Bash.  Some of the shells that Bash has
+borrowed concepts from are the Bourne Shell ('sh'), the Korn Shell
+('ksh'), and the C-shell ('csh' and its successor, 'tcsh').  The
+following menu breaks the features up into categories, noting which
+features were inspired by other shells and which are specific to Bash.
+
+   This manual is meant as a brief introduction to features found in
+Bash.  The Bash manual page should be used as the definitive reference
+on shell behavior.
+
+* Menu:
+
+* Introduction::		An introduction to the shell.
+* Definitions::			Some definitions used in the rest of this
+				manual.
+* Basic Shell Features::	The shell "building blocks".
+* Shell Builtin Commands::	Commands that are a part of the shell.
+* Shell Variables::		Variables used or set by Bash.
+* Bash Features::		Features found only in Bash.
+* Job Control::			What job control is and how Bash allows you
+				to use it.
+* Command Line Editing::	Chapter describing the command line
+				editing features.
+* Using History Interactively::	Command History Expansion
+* Installing Bash::		How to build and install Bash on your system.
+* Reporting Bugs::		How to report bugs in Bash.
+* Major Differences From The Bourne Shell::	A terse list of the differences
+						between Bash and historical
+						versions of /bin/sh.
+* GNU Free Documentation License::	Copying and sharing this documentation.
+* Indexes::			Various indexes for this manual.
+
+
+File: bash.info,  Node: Introduction,  Next: Definitions,  Up: Top
+
+1 Introduction
+**************
+
+* Menu:
+
+* What is Bash?::		A short description of Bash.
+* What is a shell?::		A brief introduction to shells.
+
+
+File: bash.info,  Node: What is Bash?,  Next: What is a shell?,  Up: Introduction
+
+1.1 What is Bash?
+=================
+
+Bash is the shell, or command language interpreter, for the GNU
+operating system.  The name is an acronym for the 'Bourne-Again SHell',
+a pun on Stephen Bourne, the author of the direct ancestor of the
+current Unix shell 'sh', which appeared in the Seventh Edition Bell Labs
+Research version of Unix.
+
+   Bash is largely compatible with 'sh' and incorporates useful features
+from the Korn shell 'ksh' and the C shell 'csh'.  It is intended to be a
+conformant implementation of the IEEE POSIX Shell and Tools portion of
+the IEEE POSIX specification (IEEE Standard 1003.1).  It offers
+functional improvements over 'sh' for both interactive and programming
+use.
+
+   While the GNU operating system provides other shells, including a
+version of 'csh', Bash is the default shell.  Like other GNU software,
+Bash is quite portable.  It currently runs on nearly every version of
+Unix and a few other operating systems - independently-supported ports
+exist for MS-DOS, OS/2, and Windows platforms.
+
+
+File: bash.info,  Node: What is a shell?,  Prev: What is Bash?,  Up: Introduction
+
+1.2 What is a shell?
+====================
+
+At its base, a shell is simply a macro processor that executes commands.
+The term macro processor means functionality where text and symbols are
+expanded to create larger expressions.
+
+   A Unix shell is both a command interpreter and a programming
+language.  As a command interpreter, the shell provides the user
+interface to the rich set of GNU utilities.  The programming language
+features allow these utilities to be combined.  Files containing
+commands can be created, and become commands themselves.  These new
+commands have the same status as system commands in directories such as
+'/bin', allowing users or groups to establish custom environments to
+automate their common tasks.
+
+   Shells may be used interactively or non-interactively.  In
+interactive mode, they accept input typed from the keyboard.  When
+executing non-interactively, shells execute commands read from a file.
+
+   A shell allows execution of GNU commands, both synchronously and
+asynchronously.  The shell waits for synchronous commands to complete
+before accepting more input; asynchronous commands continue to execute
+in parallel with the shell while it reads and executes additional
+commands.  The "redirection" constructs permit fine-grained control of
+the input and output of those commands.  Moreover, the shell allows
+control over the contents of commands' environments.
+
+   Shells also provide a small set of built-in commands ("builtins")
+implementing functionality impossible or inconvenient to obtain via
+separate utilities.  For example, 'cd', 'break', 'continue', and 'exec'
+cannot be implemented outside of the shell because they directly
+manipulate the shell itself.  The 'history', 'getopts', 'kill', or 'pwd'
+builtins, among others, could be implemented in separate utilities, but
+they are more convenient to use as builtin commands.  All of the shell
+builtins are described in subsequent sections.
+
+   While executing commands is essential, most of the power (and
+complexity) of shells is due to their embedded programming languages.
+Like any high-level language, the shell provides variables, flow control
+constructs, quoting, and functions.
+
+   Shells offer features geared specifically for interactive use rather
+than to augment the programming language.  These interactive features
+include job control, command line editing, command history and aliases.
+Each of these features is described in this manual.
+
+
+File: bash.info,  Node: Definitions,  Next: Basic Shell Features,  Prev: Introduction,  Up: Top
+
+2 Definitions
+*************
+
+These definitions are used throughout the remainder of this manual.
+
+'POSIX'
+     A family of open system standards based on Unix.  Bash is primarily
+     concerned with the Shell and Utilities portion of the POSIX 1003.1
+     standard.
+
+'blank'
+     A space or tab character.
+
+'builtin'
+     A command that is implemented internally by the shell itself,
+     rather than by an executable program somewhere in the file system.
+
+'control operator'
+     A 'token' that performs a control function.  It is a 'newline' or
+     one of the following: '||', '&&', '&', ';', ';;', ';&', ';;&', '|',
+     '|&', '(', or ')'.
+
+'exit status'
+     The value returned by a command to its caller.  The value is
+     restricted to eight bits, so the maximum value is 255.
+
+'field'
+     A unit of text that is the result of one of the shell expansions.
+     After expansion, when executing a command, the resulting fields are
+     used as the command name and arguments.
+
+'filename'
+     A string of characters used to identify a file.
+
+'job'
+     A set of processes comprising a pipeline, and any processes
+     descended from it, that are all in the same process group.
+
+'job control'
+     A mechanism by which users can selectively stop (suspend) and
+     restart (resume) execution of processes.
+
+'metacharacter'
+     A character that, when unquoted, separates words.  A metacharacter
+     is a 'space', 'tab', 'newline', or one of the following characters:
+     '|', '&', ';', '(', ')', '<', or '>'.
+
+'name'
+     A 'word' consisting solely of letters, numbers, and underscores,
+     and beginning with a letter or underscore.  'Name's are used as
+     shell variable and function names.  Also referred to as an
+     'identifier'.
+
+'operator'
+     A 'control operator' or a 'redirection operator'.  *Note
+     Redirections::, for a list of redirection operators.  Operators
+     contain at least one unquoted 'metacharacter'.
+
+'process group'
+     A collection of related processes each having the same process
+     group ID.
+
+'process group ID'
+     A unique identifier that represents a 'process group' during its
+     lifetime.
+
+'reserved word'
+     A 'word' that has a special meaning to the shell.  Most reserved
+     words introduce shell flow control constructs, such as 'for' and
+     'while'.
+
+'return status'
+     A synonym for 'exit status'.
+
+'signal'
+     A mechanism by which a process may be notified by the kernel of an
+     event occurring in the system.
+
+'special builtin'
+     A shell builtin command that has been classified as special by the
+     POSIX standard.
+
+'token'
+     A sequence of characters considered a single unit by the shell.  It
+     is either a 'word' or an 'operator'.
+
+'word'
+     A sequence of characters treated as a unit by the shell.  Words may
+     not include unquoted 'metacharacters'.
+
+
+File: bash.info,  Node: Basic Shell Features,  Next: Shell Builtin Commands,  Prev: Definitions,  Up: Top
+
+3 Basic Shell Features
+**********************
+
+Bash is an acronym for 'Bourne-Again SHell'.  The Bourne shell is the
+traditional Unix shell originally written by Stephen Bourne.  All of the
+Bourne shell builtin commands are available in Bash, The rules for
+evaluation and quoting are taken from the POSIX specification for the
+'standard' Unix shell.
+
+   This chapter briefly summarizes the shell's 'building blocks':
+commands, control structures, shell functions, shell parameters, shell
+expansions, redirections, which are a way to direct input and output
+from and to named files, and how the shell executes commands.
+
+* Menu:
+
+* Shell Syntax::		What your input means to the shell.
+* Shell Commands::		The types of commands you can use.
+* Shell Functions::		Grouping commands by name.
+* Shell Parameters::		How the shell stores values.
+* Shell Expansions::		How Bash expands parameters and the various
+				expansions available.
+* Redirections::		A way to control where input and output go.
+* Executing Commands::		What happens when you run a command.
+* Shell Scripts::		Executing files of shell commands.
+
+
+File: bash.info,  Node: Shell Syntax,  Next: Shell Commands,  Up: Basic Shell Features
+
+3.1 Shell Syntax
+================
+
+* Menu:
+
+* Shell Operation::	The basic operation of the shell.
+* Quoting::		How to remove the special meaning from characters.
+* Comments::		How to specify comments.
+
+When the shell reads input, it proceeds through a sequence of
+operations.  If the input indicates the beginning of a comment, the
+shell ignores the comment symbol ('#'), and the rest of that line.
+
+   Otherwise, roughly speaking, the shell reads its input and divides
+the input into words and operators, employing the quoting rules to
+select which meanings to assign various words and characters.
+
+   The shell then parses these tokens into commands and other
+constructs, removes the special meaning of certain words or characters,
+expands others, redirects input and output as needed, executes the
+specified command, waits for the command's exit status, and makes that
+exit status available for further inspection or processing.
+
+
+File: bash.info,  Node: Shell Operation,  Next: Quoting,  Up: Shell Syntax
+
+3.1.1 Shell Operation
+---------------------
+
+The following is a brief description of the shell's operation when it
+reads and executes a command.  Basically, the shell does the following:
+
+  1. Reads its input from a file (*note Shell Scripts::), from a string
+     supplied as an argument to the '-c' invocation option (*note
+     Invoking Bash::), or from the user's terminal.
+
+  2. Breaks the input into words and operators, obeying the quoting
+     rules described in *note Quoting::.  These tokens are separated by
+     'metacharacters'.  Alias expansion is performed by this step (*note
+     Aliases::).
+
+  3. Parses the tokens into simple and compound commands (*note Shell
+     Commands::).
+
+  4. Performs the various shell expansions (*note Shell Expansions::),
+     breaking the expanded tokens into lists of filenames (*note
+     Filename Expansion::) and commands and arguments.
+
+  5. Performs any necessary redirections (*note Redirections::) and
+     removes the redirection operators and their operands from the
+     argument list.
+
+  6. Executes the command (*note Executing Commands::).
+
+  7. Optionally waits for the command to complete and collects its exit
+     status (*note Exit Status::).
+
+
+File: bash.info,  Node: Quoting,  Next: Comments,  Prev: Shell Operation,  Up: Shell Syntax
+
+3.1.2 Quoting
+-------------
+
+* Menu:
+
+* Escape Character::	How to remove the special meaning from a single
+			character.
+* Single Quotes::	How to inhibit all interpretation of a sequence
+			of characters.
+* Double Quotes::	How to suppress most of the interpretation of a
+			sequence of characters.
+* ANSI-C Quoting::	How to expand ANSI-C sequences in quoted strings.
+* Locale Translation::	How to translate strings into different languages.
+
+Quoting is used to remove the special meaning of certain characters or
+words to the shell.  Quoting can be used to disable special treatment
+for special characters, to prevent reserved words from being recognized
+as such, and to prevent parameter expansion.
+
+   Each of the shell metacharacters (*note Definitions::) has special
+meaning to the shell and must be quoted if it is to represent itself.
+When the command history expansion facilities are being used (*note
+History Interaction::), the HISTORY EXPANSION character, usually '!',
+must be quoted to prevent history expansion.  *Note Bash History
+Facilities::, for more details concerning history expansion.
+
+   There are three quoting mechanisms: the ESCAPE CHARACTER, single
+quotes, and double quotes.
+
+
+File: bash.info,  Node: Escape Character,  Next: Single Quotes,  Up: Quoting
+
+3.1.2.1 Escape Character
+........................
+
+A non-quoted backslash '\' is the Bash escape character.  It preserves
+the literal value of the next character that follows, with the exception
+of 'newline'.  If a '\newline' pair appears, and the backslash itself is
+not quoted, the '\newline' is treated as a line continuation (that is,
+it is removed from the input stream and effectively ignored).
+
+
+File: bash.info,  Node: Single Quotes,  Next: Double Quotes,  Prev: Escape Character,  Up: Quoting
+
+3.1.2.2 Single Quotes
+.....................
+
+Enclosing characters in single quotes (''') preserves the literal value
+of each character within the quotes.  A single quote may not occur
+between single quotes, even when preceded by a backslash.
+
+
+File: bash.info,  Node: Double Quotes,  Next: ANSI-C Quoting,  Prev: Single Quotes,  Up: Quoting
+
+3.1.2.3 Double Quotes
+.....................
+
+Enclosing characters in double quotes ('"') preserves the literal value
+of all characters within the quotes, with the exception of '$', '`',
+'\', and, when history expansion is enabled, '!'.  When the shell is in
+POSIX mode (*note Bash POSIX Mode::), the '!' has no special meaning
+within double quotes, even when history expansion is enabled.  The
+characters '$' and '`' retain their special meaning within double quotes
+(*note Shell Expansions::).  The backslash retains its special meaning
+only when followed by one of the following characters: '$', '`', '"',
+'\', or 'newline'.  Within double quotes, backslashes that are followed
+by one of these characters are removed.  Backslashes preceding
+characters without a special meaning are left unmodified.  A double
+quote may be quoted within double quotes by preceding it with a
+backslash.  If enabled, history expansion will be performed unless an
+'!' appearing in double quotes is escaped using a backslash.  The
+backslash preceding the '!' is not removed.
+
+   The special parameters '*' and '@' have special meaning when in
+double quotes (*note Shell Parameter Expansion::).
+
+
+File: bash.info,  Node: ANSI-C Quoting,  Next: Locale Translation,  Prev: Double Quotes,  Up: Quoting
+
+3.1.2.4 ANSI-C Quoting
+......................
+
+Words of the form '$'STRING'' are treated specially.  The word expands
+to STRING, with backslash-escaped characters replaced as specified by
+the ANSI C standard.  Backslash escape sequences, if present, are
+decoded as follows:
+
+'\a'
+     alert (bell)
+'\b'
+     backspace
+'\e'
+'\E'
+     an escape character (not ANSI C)
+'\f'
+     form feed
+'\n'
+     newline
+'\r'
+     carriage return
+'\t'
+     horizontal tab
+'\v'
+     vertical tab
+'\\'
+     backslash
+'\''
+     single quote
+'\"'
+     double quote
+'\?'
+     question mark
+'\NNN'
+     the eight-bit character whose value is the octal value NNN (one to
+     three octal digits)
+'\xHH'
+     the eight-bit character whose value is the hexadecimal value HH
+     (one or two hex digits)
+'\uHHHH'
+     the Unicode (ISO/IEC 10646) character whose value is the
+     hexadecimal value HHHH (one to four hex digits)
+'\UHHHHHHHH'
+     the Unicode (ISO/IEC 10646) character whose value is the
+     hexadecimal value HHHHHHHH (one to eight hex digits)
+'\cX'
+     a control-X character
+
+The expanded result is single-quoted, as if the dollar sign had not been
+present.
+
+
+File: bash.info,  Node: Locale Translation,  Prev: ANSI-C Quoting,  Up: Quoting
+
+3.1.2.5 Locale-Specific Translation
+...................................
+
+A double-quoted string preceded by a dollar sign ('$') will cause the
+string to be translated according to the current locale.  The GETTEXT
+infrastructure performs the message catalog lookup and translation,
+using the 'LC_MESSAGES' and 'TEXTDOMAIN' shell variables, as explained
+below.  See the gettext documentation for additional details.  If the
+current locale is 'C' or 'POSIX', or if there are no translations
+available, the dollar sign is ignored.  If the string is translated and
+replaced, the replacement is double-quoted.
+
+   Some systems use the message catalog selected by the 'LC_MESSAGES'
+shell variable.  Others create the name of the message catalog from the
+value of the 'TEXTDOMAIN' shell variable, possibly adding a suffix of
+'.mo'.  If you use the 'TEXTDOMAIN' variable, you may need to set the
+'TEXTDOMAINDIR' variable to the location of the message catalog files.
+Still others use both variables in this fashion:
+'TEXTDOMAINDIR'/'LC_MESSAGES'/LC_MESSAGES/'TEXTDOMAIN'.mo.
+
+
+File: bash.info,  Node: Comments,  Prev: Quoting,  Up: Shell Syntax
+
+3.1.3 Comments
+--------------
+
+In a non-interactive shell, or an interactive shell in which the
+'interactive_comments' option to the 'shopt' builtin is enabled (*note
+The Shopt Builtin::), a word beginning with '#' causes that word and all
+remaining characters on that line to be ignored.  An interactive shell
+without the 'interactive_comments' option enabled does not allow
+comments.  The 'interactive_comments' option is on by default in
+interactive shells.  *Note Interactive Shells::, for a description of
+what makes a shell interactive.
+
+
+File: bash.info,  Node: Shell Commands,  Next: Shell Functions,  Prev: Shell Syntax,  Up: Basic Shell Features
+
+3.2 Shell Commands
+==================
+
+A simple shell command such as 'echo a b c' consists of the command
+itself followed by arguments, separated by spaces.
+
+   More complex shell commands are composed of simple commands arranged
+together in a variety of ways: in a pipeline in which the output of one
+command becomes the input of a second, in a loop or conditional
+construct, or in some other grouping.
+
+* Menu:
+
+* Reserved Words::		Words that have special meaning to the shell.
+* Simple Commands::		The most common type of command.
+* Pipelines::			Connecting the input and output of several
+				commands.
+* Lists::			How to execute commands sequentially.
+* Compound Commands::		Shell commands for control flow.
+* Coprocesses::			Two-way communication between commands.
+* GNU Parallel::		Running commands in parallel.
+
+
+File: bash.info,  Node: Reserved Words,  Next: Simple Commands,  Up: Shell Commands
+
+3.2.1 Reserved Words
+--------------------
+
+Reserved words are words that have special meaning to the shell.  They
+are used to begin and end the shell's compound commands.
+
+   The following words are recognized as reserved when unquoted and the
+first word of a command (see below for exceptions):
+
+'if'    'then'  'elif'  'else'  'fi'      'time'
+'for'   'in'    'until' 'while' 'do'      'done'
+'case'  'esac'  'coproc''select''function'
+'{'     '}'     '[['    ']]'    '!'
+
+'in' is recognized as a reserved word if it is the third word of a
+'case' or 'select' command.  'in' and 'do' are recognized as reserved
+words if they are the third word in a 'for' command.
+
+
+File: bash.info,  Node: Simple Commands,  Next: Pipelines,  Prev: Reserved Words,  Up: Shell Commands
+
+3.2.2 Simple Commands
+---------------------
+
+A simple command is the kind of command encountered most often.  It's
+just a sequence of words separated by 'blank's, terminated by one of the
+shell's control operators (*note Definitions::).  The first word
+generally specifies a command to be executed, with the rest of the words
+being that command's arguments.
+
+   The return status (*note Exit Status::) of a simple command is its
+exit status as provided by the POSIX 1003.1 'waitpid' function, or 128+N
+if the command was terminated by signal N.
+
+
+File: bash.info,  Node: Pipelines,  Next: Lists,  Prev: Simple Commands,  Up: Shell Commands
+
+3.2.3 Pipelines
+---------------
+
+A 'pipeline' is a sequence of one or more commands separated by one of
+the control operators '|' or '|&'.
+
+   The format for a pipeline is
+     [time [-p]] [!] COMMAND1 [ | or |& COMMAND2 ] ...
+
+The output of each command in the pipeline is connected via a pipe to
+the input of the next command.  That is, each command reads the previous
+command's output.  This connection is performed before any redirections
+specified by the command.
+
+   If '|&' is used, COMMAND1's standard error, in addition to its
+standard output, is connected to COMMAND2's standard input through the
+pipe; it is shorthand for '2>&1 |'.  This implicit redirection of the
+standard error to the standard output is performed after any
+redirections specified by the command.
+
+   The reserved word 'time' causes timing statistics to be printed for
+the pipeline once it finishes.  The statistics currently consist of
+elapsed (wall-clock) time and user and system time consumed by the
+command's execution.  The '-p' option changes the output format to that
+specified by POSIX.  When the shell is in POSIX mode (*note Bash POSIX
+Mode::), it does not recognize 'time' as a reserved word if the next
+token begins with a '-'.  The 'TIMEFORMAT' variable may be set to a
+format string that specifies how the timing information should be
+displayed.  *Note Bash Variables::, for a description of the available
+formats.  The use of 'time' as a reserved word permits the timing of
+shell builtins, shell functions, and pipelines.  An external 'time'
+command cannot time these easily.
+
+   When the shell is in POSIX mode (*note Bash POSIX Mode::), 'time' may
+be followed by a newline.  In this case, the shell displays the total
+user and system time consumed by the shell and its children.  The
+'TIMEFORMAT' variable may be used to specify the format of the time
+information.
+
+   If the pipeline is not executed asynchronously (*note Lists::), the
+shell waits for all commands in the pipeline to complete.
+
+   Each command in a pipeline is executed in its own subshell, which is
+a separate process (*note Command Execution Environment::).  If the
+'lastpipe' option is enabled using the 'shopt' builtin (*note The Shopt
+Builtin::), the last element of a pipeline may be run by the shell
+process.
+
+   The exit status of a pipeline is the exit status of the last command
+in the pipeline, unless the 'pipefail' option is enabled (*note The Set
+Builtin::).  If 'pipefail' is enabled, the pipeline's return status is
+the value of the last (rightmost) command to exit with a non-zero
+status, or zero if all commands exit successfully.  If the reserved word
+'!' precedes the pipeline, the exit status is the logical negation of
+the exit status as described above.  The shell waits for all commands in
+the pipeline to terminate before returning a value.
+
+
+File: bash.info,  Node: Lists,  Next: Compound Commands,  Prev: Pipelines,  Up: Shell Commands
+
+3.2.4 Lists of Commands
+-----------------------
+
+A 'list' is a sequence of one or more pipelines separated by one of the
+operators ';', '&', '&&', or '||', and optionally terminated by one of
+';', '&', or a 'newline'.
+
+   Of these list operators, '&&' and '||' have equal precedence,
+followed by ';' and '&', which have equal precedence.
+
+   A sequence of one or more newlines may appear in a 'list' to delimit
+commands, equivalent to a semicolon.
+
+   If a command is terminated by the control operator '&', the shell
+executes the command asynchronously in a subshell.  This is known as
+executing the command in the BACKGROUND, and these are referred to as
+ASYNCHRONOUS commands.  The shell does not wait for the command to
+finish, and the return status is 0 (true).  When job control is not
+active (*note Job Control::), the standard input for asynchronous
+commands, in the absence of any explicit redirections, is redirected
+from '/dev/null'.
+
+   Commands separated by a ';' are executed sequentially; the shell
+waits for each command to terminate in turn.  The return status is the
+exit status of the last command executed.
+
+   AND and OR lists are sequences of one or more pipelines separated by
+the control operators '&&' and '||', respectively.  AND and OR lists are
+executed with left associativity.
+
+   An AND list has the form
+     COMMAND1 && COMMAND2
+
+COMMAND2 is executed if, and only if, COMMAND1 returns an exit status of
+zero (success).
+
+   An OR list has the form
+     COMMAND1 || COMMAND2
+
+COMMAND2 is executed if, and only if, COMMAND1 returns a non-zero exit
+status.
+
+   The return status of AND and OR lists is the exit status of the last
+command executed in the list.
+
+
+File: bash.info,  Node: Compound Commands,  Next: Coprocesses,  Prev: Lists,  Up: Shell Commands
+
+3.2.5 Compound Commands
+-----------------------
+
+* Menu:
+
+* Looping Constructs::		Shell commands for iterative action.
+* Conditional Constructs::	Shell commands for conditional execution.
+* Command Grouping::		Ways to group commands.
+
+Compound commands are the shell programming language constructs.  Each
+construct begins with a reserved word or control operator and is
+terminated by a corresponding reserved word or operator.  Any
+redirections (*note Redirections::) associated with a compound command
+apply to all commands within that compound command unless explicitly
+overridden.
+
+   In most cases a list of commands in a compound command's description
+may be separated from the rest of the command by one or more newlines,
+and may be followed by a newline in place of a semicolon.
+
+   Bash provides looping constructs, conditional commands, and
+mechanisms to group commands and execute them as a unit.
+
+
+File: bash.info,  Node: Looping Constructs,  Next: Conditional Constructs,  Up: Compound Commands
+
+3.2.5.1 Looping Constructs
+..........................
+
+Bash supports the following looping constructs.
+
+   Note that wherever a ';' appears in the description of a command's
+syntax, it may be replaced with one or more newlines.
+
+'until'
+     The syntax of the 'until' command is:
+
+          until TEST-COMMANDS; do CONSEQUENT-COMMANDS; done
+
+     Execute CONSEQUENT-COMMANDS as long as TEST-COMMANDS has an exit
+     status which is not zero.  The return status is the exit status of
+     the last command executed in CONSEQUENT-COMMANDS, or zero if none
+     was executed.
+
+'while'
+     The syntax of the 'while' command is:
+
+          while TEST-COMMANDS; do CONSEQUENT-COMMANDS; done
+
+     Execute CONSEQUENT-COMMANDS as long as TEST-COMMANDS has an exit
+     status of zero.  The return status is the exit status of the last
+     command executed in CONSEQUENT-COMMANDS, or zero if none was
+     executed.
+
+'for'
+     The syntax of the 'for' command is:
+
+          for NAME [ [in [WORDS ...] ] ; ] do COMMANDS; done
+
+     Expand WORDS (*note Shell Expansions::), and execute COMMANDS once
+     for each member in the resultant list, with NAME bound to the
+     current member.  If 'in WORDS' is not present, the 'for' command
+     executes the COMMANDS once for each positional parameter that is
+     set, as if 'in "$@"' had been specified (*note Special
+     Parameters::).
+
+     The return status is the exit status of the last command that
+     executes.  If there are no items in the expansion of WORDS, no
+     commands are executed, and the return status is zero.
+
+     An alternate form of the 'for' command is also supported:
+
+          for (( EXPR1 ; EXPR2 ; EXPR3 )) ; do COMMANDS ; done
+
+     First, the arithmetic expression EXPR1 is evaluated according to
+     the rules described below (*note Shell Arithmetic::).  The
+     arithmetic expression EXPR2 is then evaluated repeatedly until it
+     evaluates to zero.  Each time EXPR2 evaluates to a non-zero value,
+     COMMANDS are executed and the arithmetic expression EXPR3 is
+     evaluated.  If any expression is omitted, it behaves as if it
+     evaluates to 1.  The return value is the exit status of the last
+     command in COMMANDS that is executed, or false if any of the
+     expressions is invalid.
+
+   The 'break' and 'continue' builtins (*note Bourne Shell Builtins::)
+may be used to control loop execution.
+
+
+File: bash.info,  Node: Conditional Constructs,  Next: Command Grouping,  Prev: Looping Constructs,  Up: Compound Commands
+
+3.2.5.2 Conditional Constructs
+..............................
+
+'if'
+     The syntax of the 'if' command is:
+
+          if TEST-COMMANDS; then
+            CONSEQUENT-COMMANDS;
+          [elif MORE-TEST-COMMANDS; then
+            MORE-CONSEQUENTS;]
+          [else ALTERNATE-CONSEQUENTS;]
+          fi
+
+     The TEST-COMMANDS list is executed, and if its return status is
+     zero, the CONSEQUENT-COMMANDS list is executed.  If TEST-COMMANDS
+     returns a non-zero status, each 'elif' list is executed in turn,
+     and if its exit status is zero, the corresponding MORE-CONSEQUENTS
+     is executed and the command completes.  If 'else
+     ALTERNATE-CONSEQUENTS' is present, and the final command in the
+     final 'if' or 'elif' clause has a non-zero exit status, then
+     ALTERNATE-CONSEQUENTS is executed.  The return status is the exit
+     status of the last command executed, or zero if no condition tested
+     true.
+
+'case'
+     The syntax of the 'case' command is:
+
+          case WORD in
+              [ [(] PATTERN [| PATTERN]...) COMMAND-LIST ;;]...
+          esac
+
+     'case' will selectively execute the COMMAND-LIST corresponding to
+     the first PATTERN that matches WORD.  The match is performed
+     according to the rules described below in *note Pattern Matching::.
+     If the 'nocasematch' shell option (see the description of 'shopt'
+     in *note The Shopt Builtin::) is enabled, the match is performed
+     without regard to the case of alphabetic characters.  The '|' is
+     used to separate multiple patterns, and the ')' operator terminates
+     a pattern list.  A list of patterns and an associated command-list
+     is known as a CLAUSE.
+
+     Each clause must be terminated with ';;', ';&', or ';;&'.  The WORD
+     undergoes tilde expansion, parameter expansion, command
+     substitution, arithmetic expansion, and quote removal (*note Shell
+     Parameter Expansion::) before matching is attempted.  Each PATTERN
+     undergoes tilde expansion, parameter expansion, command
+     substitution, and arithmetic expansion.
+
+     There may be an arbitrary number of 'case' clauses, each terminated
+     by a ';;', ';&', or ';;&'.  The first pattern that matches
+     determines the command-list that is executed.  It's a common idiom
+     to use '*' as the final pattern to define the default case, since
+     that pattern will always match.
+
+     Here is an example using 'case' in a script that could be used to
+     describe one interesting feature of an animal:
+
+          echo -n "Enter the name of an animal: "
+          read ANIMAL
+          echo -n "The $ANIMAL has "
+          case $ANIMAL in
+            horse | dog | cat) echo -n "four";;
+            man | kangaroo ) echo -n "two";;
+            *) echo -n "an unknown number of";;
+          esac
+          echo " legs."
+
+
+     If the ';;' operator is used, no subsequent matches are attempted
+     after the first pattern match.  Using ';&' in place of ';;' causes
+     execution to continue with the COMMAND-LIST associated with the
+     next clause, if any.  Using ';;&' in place of ';;' causes the shell
+     to test the patterns in the next clause, if any, and execute any
+     associated COMMAND-LIST on a successful match, continuing the case
+     statement execution as if the pattern list had not matched.
+
+     The return status is zero if no PATTERN is matched.  Otherwise, the
+     return status is the exit status of the COMMAND-LIST executed.
+
+'select'
+
+     The 'select' construct allows the easy generation of menus.  It has
+     almost the same syntax as the 'for' command:
+
+          select NAME [in WORDS ...]; do COMMANDS; done
+
+     The list of words following 'in' is expanded, generating a list of
+     items.  The set of expanded words is printed on the standard error
+     output stream, each preceded by a number.  If the 'in WORDS' is
+     omitted, the positional parameters are printed, as if 'in "$@"' had
+     been specified.  The 'PS3' prompt is then displayed and a line is
+     read from the standard input.  If the line consists of a number
+     corresponding to one of the displayed words, then the value of NAME
+     is set to that word.  If the line is empty, the words and prompt
+     are displayed again.  If 'EOF' is read, the 'select' command
+     completes.  Any other value read causes NAME to be set to null.
+     The line read is saved in the variable 'REPLY'.
+
+     The COMMANDS are executed after each selection until a 'break'
+     command is executed, at which point the 'select' command completes.
+
+     Here is an example that allows the user to pick a filename from the
+     current directory, and displays the name and index of the file
+     selected.
+
+          select fname in *;
+          do
+          	echo you picked $fname \($REPLY\)
+          	break;
+          done
+
+'((...))'
+          (( EXPRESSION ))
+
+     The arithmetic EXPRESSION is evaluated according to the rules
+     described below (*note Shell Arithmetic::).  If the value of the
+     expression is non-zero, the return status is 0; otherwise the
+     return status is 1.  This is exactly equivalent to
+          let "EXPRESSION"
+     *Note Bash Builtins::, for a full description of the 'let' builtin.
+
+'[[...]]'
+          [[ EXPRESSION ]]
+
+     Return a status of 0 or 1 depending on the evaluation of the
+     conditional expression EXPRESSION.  Expressions are composed of the
+     primaries described below in *note Bash Conditional Expressions::.
+     Word splitting and filename expansion are not performed on the
+     words between the '[[' and ']]'; tilde expansion, parameter and
+     variable expansion, arithmetic expansion, command substitution,
+     process substitution, and quote removal are performed.  Conditional
+     operators such as '-f' must be unquoted to be recognized as
+     primaries.
+
+     When used with '[[', the '<' and '>' operators sort
+     lexicographically using the current locale.
+
+     When the '==' and '!=' operators are used, the string to the right
+     of the operator is considered a pattern and matched according to
+     the rules described below in *note Pattern Matching::, as if the
+     'extglob' shell option were enabled.  The '=' operator is identical
+     to '=='.  If the 'nocasematch' shell option (see the description of
+     'shopt' in *note The Shopt Builtin::) is enabled, the match is
+     performed without regard to the case of alphabetic characters.  The
+     return value is 0 if the string matches ('==') or does not match
+     ('!=') the pattern, and 1 otherwise.  Any part of the pattern may
+     be quoted to force the quoted portion to be matched as a string.
+
+     An additional binary operator, '=~', is available, with the same
+     precedence as '==' and '!='.  When it is used, the string to the
+     right of the operator is considered a POSIX extended regular
+     expression and matched accordingly (using the POSIX 'regcomp' and
+     'regexec' interfaces usually described in regex(3)).  The return
+     value is 0 if the string matches the pattern, and 1 otherwise.  If
+     the regular expression is syntactically incorrect, the conditional
+     expression's return value is 2.  If the 'nocasematch' shell option
+     (see the description of 'shopt' in *note The Shopt Builtin::) is
+     enabled, the match is performed without regard to the case of
+     alphabetic characters.  Any part of the pattern may be quoted to
+     force the quoted portion to be matched as a string.  Bracket
+     expressions in regular expressions must be treated carefully, since
+     normal quoting characters lose their meanings between brackets.  If
+     the pattern is stored in a shell variable, quoting the variable
+     expansion forces the entire pattern to be matched as a string.
+
+     The pattern will match if it matches any part of the string.
+     Anchor the pattern using the '^' and '$' regular expression
+     operators to force it to match the entire string.  The array
+     variable 'BASH_REMATCH' records which parts of the string matched
+     the pattern.  The element of 'BASH_REMATCH' with index 0 contains
+     the portion of the string matching the entire regular expression.
+     Substrings matched by parenthesized subexpressions within the
+     regular expression are saved in the remaining 'BASH_REMATCH'
+     indices.  The element of 'BASH_REMATCH' with index N is the portion
+     of the string matching the Nth parenthesized subexpression.
+
+     For example, the following will match a line (stored in the shell
+     variable LINE) if there is a sequence of characters anywhere in the
+     value consisting of any number, including zero, of characters in
+     the 'space' character class, zero or one instances of 'a', then a
+     'b':
+          [[ $line =~ [[:space:]]*(a)?b ]]
+
+     That means values like 'aab' and ' aaaaaab' will match, as will a
+     line containing a 'b' anywhere in its value.
+
+     Storing the regular expression in a shell variable is often a
+     useful way to avoid problems with quoting characters that are
+     special to the shell.  It is sometimes difficult to specify a
+     regular expression literally without using quotes, or to keep track
+     of the quoting used by regular expressions while paying attention
+     to the shell's quote removal.  Using a shell variable to store the
+     pattern decreases these problems.  For example, the following is
+     equivalent to the above:
+          pattern='[[:space:]]*(a)?b'
+          [[ $line =~ $pattern ]]
+
+     If you want to match a character that's special to the regular
+     expression grammar, it has to be quoted to remove its special
+     meaning.  This means that in the pattern 'xxx.txt', the '.' matches
+     any character in the string (its usual regular expression meaning),
+     but in the pattern '"xxx.txt"' it can only match a literal '.'.
+     Shell programmers should take special care with backslashes, since
+     backslashes are used both by the shell and regular expressions to
+     remove the special meaning from the following character.  The
+     following two sets of commands are _not_ equivalent:
+          pattern='\.'
+
+          [[ . =~ $pattern ]]
+          [[ . =~ \. ]]
+
+          [[ . =~ "$pattern" ]]
+          [[ . =~ '\.' ]]
+
+     The first two matches will succeed, but the second two will not,
+     because in the second two the backslash will be part of the pattern
+     to be matched.  In the first two examples, the backslash removes
+     the special meaning from '.', so the literal '.' matches.  If the
+     string in the first examples were anything other than '.', say 'a',
+     the pattern would not match, because the quoted '.' in the pattern
+     loses its special meaning of matching any single character.
+
+     Expressions may be combined using the following operators, listed
+     in decreasing order of precedence:
+
+     '( EXPRESSION )'
+          Returns the value of EXPRESSION.  This may be used to override
+          the normal precedence of operators.
+
+     '! EXPRESSION'
+          True if EXPRESSION is false.
+
+     'EXPRESSION1 && EXPRESSION2'
+          True if both EXPRESSION1 and EXPRESSION2 are true.
+
+     'EXPRESSION1 || EXPRESSION2'
+          True if either EXPRESSION1 or EXPRESSION2 is true.
+
+     The '&&' and '||' operators do not evaluate EXPRESSION2 if the
+     value of EXPRESSION1 is sufficient to determine the return value of
+     the entire conditional expression.
+
+
+File: bash.info,  Node: Command Grouping,  Prev: Conditional Constructs,  Up: Compound Commands
+
+3.2.5.3 Grouping Commands
+.........................
+
+Bash provides two ways to group a list of commands to be executed as a
+unit.  When commands are grouped, redirections may be applied to the
+entire command list.  For example, the output of all the commands in the
+list may be redirected to a single stream.
+
+'()'
+          ( LIST )
+
+     Placing a list of commands between parentheses causes a subshell
+     environment to be created (*note Command Execution Environment::),
+     and each of the commands in LIST to be executed in that subshell.
+     Since the LIST is executed in a subshell, variable assignments do
+     not remain in effect after the subshell completes.
+
+'{}'
+          { LIST; }
+
+     Placing a list of commands between curly braces causes the list to
+     be executed in the current shell context.  No subshell is created.
+     The semicolon (or newline) following LIST is required.
+
+   In addition to the creation of a subshell, there is a subtle
+difference between these two constructs due to historical reasons.  The
+braces are 'reserved words', so they must be separated from the LIST by
+'blank's or other shell metacharacters.  The parentheses are
+'operators', and are recognized as separate tokens by the shell even if
+they are not separated from the LIST by whitespace.
+
+   The exit status of both of these constructs is the exit status of
+LIST.
+
+
+File: bash.info,  Node: Coprocesses,  Next: GNU Parallel,  Prev: Compound Commands,  Up: Shell Commands
+
+3.2.6 Coprocesses
+-----------------
+
+A 'coprocess' is a shell command preceded by the 'coproc' reserved word.
+A coprocess is executed asynchronously in a subshell, as if the command
+had been terminated with the '&' control operator, with a two-way pipe
+established between the executing shell and the coprocess.
+
+   The format for a coprocess is:
+     coproc [NAME] COMMAND [REDIRECTIONS]
+
+This creates a coprocess named NAME.  If NAME is not supplied, the
+default name is COPROC.  NAME must not be supplied if COMMAND is a
+simple command (*note Simple Commands::); otherwise, it is interpreted
+as the first word of the simple command.
+
+   When the coprocess is executed, the shell creates an array variable
+(*note Arrays::) named 'NAME' in the context of the executing shell.
+The standard output of COMMAND is connected via a pipe to a file
+descriptor in the executing shell, and that file descriptor is assigned
+to 'NAME'[0].  The standard input of COMMAND is connected via a pipe to
+a file descriptor in the executing shell, and that file descriptor is
+assigned to 'NAME'[1].  This pipe is established before any redirections
+specified by the command (*note Redirections::).  The file descriptors
+can be utilized as arguments to shell commands and redirections using
+standard word expansions.  Other than those created to execute command
+and process substitutions, the file descriptors are not available in
+subshells.
+
+   The process ID of the shell spawned to execute the coprocess is
+available as the value of the variable 'NAME'_PID. The 'wait' builtin
+command may be used to wait for the coprocess to terminate.
+
+   Since the coprocess is created as an asynchronous command, the
+'coproc' command always returns success.  The return status of a
+coprocess is the exit status of COMMAND.
+
+
+File: bash.info,  Node: GNU Parallel,  Prev: Coprocesses,  Up: Shell Commands
+
+3.2.7 GNU Parallel
+------------------
+
+There are ways to run commands in parallel that are not built into Bash.
+GNU Parallel is a tool to do just that.
+
+   GNU Parallel, as its name suggests, can be used to build and run
+commands in parallel.  You may run the same command with different
+arguments, whether they are filenames, usernames, hostnames, or lines
+read from files.  GNU Parallel provides shorthand references to many of
+the most common operations (input lines, various portions of the input
+line, different ways to specify the input source, and so on).  Parallel
+can replace 'xargs' or feed commands from its input sources to several
+different instances of Bash.
+
+   For a complete description, refer to the GNU Parallel documentation.
+A few examples should provide a brief introduction to its use.
+
+   For example, it is easy to replace 'xargs' to gzip all html files in
+the current directory and its subdirectories:
+     find . -type f -name '*.html' -print | parallel gzip
+If you need to protect special characters such as newlines in file
+names, use find's '-print0' option and parallel's '-0' option.
+
+   You can use Parallel to move files from the current directory when
+the number of files is too large to process with one 'mv' invocation:
+     printf '%s\n' * | parallel mv {} destdir
+
+   As you can see, the {} is replaced with each line read from standard
+input.  While using 'ls' will work in most instances, it is not
+sufficient to deal with all filenames.  'printf' is a shell builtin, and
+therefore is not subject to the kernel's limit on the number of
+arguments to a program, so you can use '*' (but see below about the
+'dotglob' shell option).  If you need to accommodate special characters
+in filenames, you can use
+
+     printf '%s\0' * | parallel -0 mv {} destdir
+
+as alluded to above.
+
+   This will run as many 'mv' commands as there are files in the current
+directory.  You can emulate a parallel 'xargs' by adding the '-X'
+option:
+     printf '%s\0' * | parallel -0 -X mv {} destdir
+
+   (You may have to modify the pattern if you have the 'dotglob' option
+enabled.)
+
+   GNU Parallel can replace certain common idioms that operate on lines
+read from a file (in this case, filenames listed one per line):
+     	while IFS= read -r x; do
+     		do-something1 "$x" "config-$x"
+     		do-something2 < "$x"
+     	done < file | process-output
+
+with a more compact syntax reminiscent of lambdas:
+     cat list | parallel "do-something1 {} config-{} ; do-something2 < {}" |
+                process-output
+
+   Parallel provides a built-in mechanism to remove filename extensions,
+which lends itself to batch file transformations or renaming:
+     ls *.gz | parallel -j+0 "zcat {} | bzip2 >{.}.bz2 && rm {}"
+This will recompress all files in the current directory with names
+ending in .gz using bzip2, running one job per CPU (-j+0) in parallel.
+(We use 'ls' for brevity here; using 'find' as above is more robust in
+the face of filenames containing unexpected characters.)  Parallel can
+take arguments from the command line; the above can also be written as
+
+     parallel "zcat {} | bzip2 >{.}.bz2 && rm {}" ::: *.gz
+
+   If a command generates output, you may want to preserve the input
+order in the output.  For instance, the following command
+     {
+         echo foss.org.my ;
+         echo debian.org ;
+         echo freenetproject.org ;
+     } | parallel traceroute
+will display as output the traceroute invocation that finishes first.
+Adding the '-k' option
+     {
+         echo foss.org.my ;
+         echo debian.org ;
+         echo freenetproject.org ;
+     } | parallel -k traceroute
+will ensure that the output of 'traceroute foss.org.my' is displayed
+first.
+
+   Finally, Parallel can be used to run a sequence of shell commands in
+parallel, similar to 'cat file | bash'.  It is not uncommon to take a
+list of filenames, create a series of shell commands to operate on them,
+and feed that list of commands to a shell.  Parallel can speed this up.
+Assuming that 'file' contains a list of shell commands, one per line,
+
+     parallel -j 10 < file
+
+will evaluate the commands using the shell (since no explicit command is
+supplied as an argument), in blocks of ten shell jobs at a time.
+
+
+File: bash.info,  Node: Shell Functions,  Next: Shell Parameters,  Prev: Shell Commands,  Up: Basic Shell Features
+
+3.3 Shell Functions
+===================
+
+Shell functions are a way to group commands for later execution using a
+single name for the group.  They are executed just like a "regular"
+command.  When the name of a shell function is used as a simple command
+name, the list of commands associated with that function name is
+executed.  Shell functions are executed in the current shell context; no
+new process is created to interpret them.
+
+   Functions are declared using this syntax:
+     FNAME () COMPOUND-COMMAND [ REDIRECTIONS ]
+
+   or
+
+     function FNAME [()] COMPOUND-COMMAND [ REDIRECTIONS ]
+
+   This defines a shell function named FNAME.  The reserved word
+'function' is optional.  If the 'function' reserved word is supplied,
+the parentheses are optional.  The BODY of the function is the compound
+command COMPOUND-COMMAND (*note Compound Commands::).  That command is
+usually a LIST enclosed between { and }, but may be any compound command
+listed above, with one exception: If the 'function' reserved word is
+used, but the parentheses are not supplied, the braces are required.
+COMPOUND-COMMAND is executed whenever FNAME is specified as the name of
+a command.  When the shell is in POSIX mode (*note Bash POSIX Mode::),
+FNAME must be a valid shell NAME and may not be the same as one of the
+special builtins (*note Special Builtins::).  In default mode, a
+function name can be any unquoted shell word that does not contain '$'.
+Any redirections (*note Redirections::) associated with the shell
+function are performed when the function is executed.  A function
+definition may be deleted using the '-f' option to the 'unset' builtin
+(*note Bourne Shell Builtins::).
+
+   The exit status of a function definition is zero unless a syntax
+error occurs or a readonly function with the same name already exists.
+When executed, the exit status of a function is the exit status of the
+last command executed in the body.
+
+   Note that for historical reasons, in the most common usage the curly
+braces that surround the body of the function must be separated from the
+body by 'blank's or newlines.  This is because the braces are reserved
+words and are only recognized as such when they are separated from the
+command list by whitespace or another shell metacharacter.  Also, when
+using the braces, the LIST must be terminated by a semicolon, a '&', or
+a newline.
+
+   When a function is executed, the arguments to the function become the
+positional parameters during its execution (*note Positional
+Parameters::).  The special parameter '#' that expands to the number of
+positional parameters is updated to reflect the change.  Special
+parameter '0' is unchanged.  The first element of the 'FUNCNAME'
+variable is set to the name of the function while the function is
+executing.
+
+   All other aspects of the shell execution environment are identical
+between a function and its caller with these exceptions: the 'DEBUG' and
+'RETURN' traps are not inherited unless the function has been given the
+'trace' attribute using the 'declare' builtin or the '-o functrace'
+option has been enabled with the 'set' builtin, (in which case all
+functions inherit the 'DEBUG' and 'RETURN' traps), and the 'ERR' trap is
+not inherited unless the '-o errtrace' shell option has been enabled.
+*Note Bourne Shell Builtins::, for the description of the 'trap'
+builtin.
+
+   The 'FUNCNEST' variable, if set to a numeric value greater than 0,
+defines a maximum function nesting level.  Function invocations that
+exceed the limit cause the entire command to abort.
+
+   If the builtin command 'return' is executed in a function, the
+function completes and execution resumes with the next command after the
+function call.  Any command associated with the 'RETURN' trap is
+executed before execution resumes.  When a function completes, the
+values of the positional parameters and the special parameter '#' are
+restored to the values they had prior to the function's execution.  If a
+numeric argument is given to 'return', that is the function's return
+status; otherwise the function's return status is the exit status of the
+last command executed before the 'return'.
+
+   Variables local to the function may be declared with the 'local'
+builtin.  These variables are visible only to the function and the
+commands it invokes.  This is particularly important when a shell
+function calls other functions.
+
+   Local variables "shadow" variables with the same name declared at
+previous scopes.  For instance, a local variable declared in a function
+hides a global variable of the same name: references and assignments
+refer to the local variable, leaving the global variable unmodified.
+When the function returns, the global variable is once again visible.
+
+   The shell uses DYNAMIC SCOPING to control a variable's visibility
+within functions.  With dynamic scoping, visible variables and their
+values are a result of the sequence of function calls that caused
+execution to reach the current function.  The value of a variable that a
+function sees depends on its value within its caller, if any, whether
+that caller is the "global" scope or another shell function.  This is
+also the value that a local variable declaration "shadows", and the
+value that is restored when the function returns.
+
+   For example, if a variable VAR is declared as local in function
+FUNC1, and FUNC1 calls another function FUNC2, references to VAR made
+from within FUNC2 will resolve to the local variable VAR from FUNC1,
+shadowing any global variable named VAR.
+
+   The following script demonstrates this behavior.  When executed, the
+script displays
+
+     In func2, var = func1 local
+
+     func1()
+     {
+         local var='func1 local'
+         func2
+     }
+
+     func2()
+     {
+         echo "In func2, var = $var"
+     }
+
+     var=global
+     func1
+
+   The 'unset' builtin also acts using the same dynamic scope: if a
+variable is local to the current scope, 'unset' will unset it; otherwise
+the unset will refer to the variable found in any calling scope as
+described above.  If a variable at the current local scope is unset, it
+will remain so until it is reset in that scope or until the function
+returns.  Once the function returns, any instance of the variable at a
+previous scope will become visible.  If the unset acts on a variable at
+a previous scope, any instance of a variable with that name that had
+been shadowed will become visible.
+
+   Function names and definitions may be listed with the '-f' option to
+the 'declare' ('typeset') builtin command (*note Bash Builtins::).  The
+'-F' option to 'declare' or 'typeset' will list the function names only
+(and optionally the source file and line number, if the 'extdebug' shell
+option is enabled).  Functions may be exported so that subshells
+automatically have them defined with the '-f' option to the 'export'
+builtin (*note Bourne Shell Builtins::).
+
+   Functions may be recursive.  The 'FUNCNEST' variable may be used to
+limit the depth of the function call stack and restrict the number of
+function invocations.  By default, no limit is placed on the number of
+recursive calls.
+
+
+File: bash.info,  Node: Shell Parameters,  Next: Shell Expansions,  Prev: Shell Functions,  Up: Basic Shell Features
+
+3.4 Shell Parameters
+====================
+
+* Menu:
+
+* Positional Parameters::	The shell's command-line arguments.
+* Special Parameters::		Parameters denoted by special characters.
+
+A PARAMETER is an entity that stores values.  It can be a 'name', a
+number, or one of the special characters listed below.  A VARIABLE is a
+parameter denoted by a 'name'.  A variable has a VALUE and zero or more
+ATTRIBUTES.  Attributes are assigned using the 'declare' builtin command
+(see the description of the 'declare' builtin in *note Bash Builtins::).
+
+   A parameter is set if it has been assigned a value.  The null string
+is a valid value.  Once a variable is set, it may be unset only by using
+the 'unset' builtin command.
+
+   A variable may be assigned to by a statement of the form
+     NAME=[VALUE]
+If VALUE is not given, the variable is assigned the null string.  All
+VALUEs undergo tilde expansion, parameter and variable expansion,
+command substitution, arithmetic expansion, and quote removal (detailed
+below).  If the variable has its 'integer' attribute set, then VALUE is
+evaluated as an arithmetic expression even if the '$((...))' expansion
+is not used (*note Arithmetic Expansion::).  Word splitting is not
+performed, with the exception of '"$@"' as explained below.  Filename
+expansion is not performed.  Assignment statements may also appear as
+arguments to the 'alias', 'declare', 'typeset', 'export', 'readonly',
+and 'local' builtin commands (DECLARATION commands).  When in POSIX mode
+(*note Bash POSIX Mode::), these builtins may appear in a command after
+one or more instances of the 'command' builtin and retain these
+assignment statement properties.
+
+   In the context where an assignment statement is assigning a value to
+a shell variable or array index (*note Arrays::), the '+=' operator can
+be used to append to or add to the variable's previous value.  This
+includes arguments to builtin commands such as 'declare' that accept
+assignment statements (DECLARATION commands).  When '+=' is applied to a
+variable for which the INTEGER attribute has been set, VALUE is
+evaluated as an arithmetic expression and added to the variable's
+current value, which is also evaluated.  When '+=' is applied to an
+array variable using compound assignment (*note Arrays::), the
+variable's value is not unset (as it is when using '='), and new values
+are appended to the array beginning at one greater than the array's
+maximum index (for indexed arrays), or added as additional key-value
+pairs in an associative array.  When applied to a string-valued
+variable, VALUE is expanded and appended to the variable's value.
+
+   A variable can be assigned the NAMEREF attribute using the '-n'
+option to the 'declare' or 'local' builtin commands (*note Bash
+Builtins::) to create a NAMEREF, or a reference to another variable.
+This allows variables to be manipulated indirectly.  Whenever the
+nameref variable is referenced, assigned to, unset, or has its
+attributes modified (other than using or changing the nameref attribute
+itself), the operation is actually performed on the variable specified
+by the nameref variable's value.  A nameref is commonly used within
+shell functions to refer to a variable whose name is passed as an
+argument to the function.  For instance, if a variable name is passed to
+a shell function as its first argument, running
+     declare -n ref=$1
+inside the function creates a nameref variable REF whose value is the
+variable name passed as the first argument.  References and assignments
+to REF, and changes to its attributes, are treated as references,
+assignments, and attribute modifications to the variable whose name was
+passed as '$1'.
+
+   If the control variable in a 'for' loop has the nameref attribute,
+the list of words can be a list of shell variables, and a name reference
+will be established for each word in the list, in turn, when the loop is
+executed.  Array variables cannot be given the nameref attribute.
+However, nameref variables can reference array variables and subscripted
+array variables.  Namerefs can be unset using the '-n' option to the
+'unset' builtin (*note Bourne Shell Builtins::).  Otherwise, if 'unset'
+is executed with the name of a nameref variable as an argument, the
+variable referenced by the nameref variable will be unset.
+
+
+File: bash.info,  Node: Positional Parameters,  Next: Special Parameters,  Up: Shell Parameters
+
+3.4.1 Positional Parameters
+---------------------------
+
+A POSITIONAL PARAMETER is a parameter denoted by one or more digits,
+other than the single digit '0'.  Positional parameters are assigned
+from the shell's arguments when it is invoked, and may be reassigned
+using the 'set' builtin command.  Positional parameter 'N' may be
+referenced as '${N}', or as '$N' when 'N' consists of a single digit.
+Positional parameters may not be assigned to with assignment statements.
+The 'set' and 'shift' builtins are used to set and unset them (*note
+Shell Builtin Commands::).  The positional parameters are temporarily
+replaced when a shell function is executed (*note Shell Functions::).
+
+   When a positional parameter consisting of more than a single digit is
+expanded, it must be enclosed in braces.
+
+
+File: bash.info,  Node: Special Parameters,  Prev: Positional Parameters,  Up: Shell Parameters
+
+3.4.2 Special Parameters
+------------------------
+
+The shell treats several parameters specially.  These parameters may
+only be referenced; assignment to them is not allowed.
+
+'*'
+     ($*) Expands to the positional parameters, starting from one.  When
+     the expansion is not within double quotes, each positional
+     parameter expands to a separate word.  In contexts where it is
+     performed, those words are subject to further word splitting and
+     filename expansion.  When the expansion occurs within double
+     quotes, it expands to a single word with the value of each
+     parameter separated by the first character of the 'IFS' special
+     variable.  That is, '"$*"' is equivalent to '"$1C$2C..."', where C
+     is the first character of the value of the 'IFS' variable.  If
+     'IFS' is unset, the parameters are separated by spaces.  If 'IFS'
+     is null, the parameters are joined without intervening separators.
+
+'@'
+     ($@) Expands to the positional parameters, starting from one.  In
+     contexts where word splitting is performed, this expands each
+     positional parameter to a separate word; if not within double
+     quotes, these words are subject to word splitting.  In contexts
+     where word splitting is not performed, this expands to a single
+     word with each positional parameter separated by a space.  When the
+     expansion occurs within double quotes, and word splitting is
+     performed, each parameter expands to a separate word.  That is,
+     '"$@"' is equivalent to '"$1" "$2" ...'.  If the double-quoted
+     expansion occurs within a word, the expansion of the first
+     parameter is joined with the beginning part of the original word,
+     and the expansion of the last parameter is joined with the last
+     part of the original word.  When there are no positional
+     parameters, '"$@"' and '$@' expand to nothing (i.e., they are
+     removed).
+
+'#'
+     ($#) Expands to the number of positional parameters in decimal.
+
+'?'
+     ($?)  Expands to the exit status of the most recently executed
+     foreground pipeline.
+
+'-'
+     ($-, a hyphen.)  Expands to the current option flags as specified
+     upon invocation, by the 'set' builtin command, or those set by the
+     shell itself (such as the '-i' option).
+
+'$'
+     ($$) Expands to the process ID of the shell.  In a '()' subshell,
+     it expands to the process ID of the invoking shell, not the
+     subshell.
+
+'!'
+     ($!)  Expands to the process ID of the job most recently placed
+     into the background, whether executed as an asynchronous command or
+     using the 'bg' builtin (*note Job Control Builtins::).
+
+'0'
+     ($0) Expands to the name of the shell or shell script.  This is set
+     at shell initialization.  If Bash is invoked with a file of
+     commands (*note Shell Scripts::), '$0' is set to the name of that
+     file.  If Bash is started with the '-c' option (*note Invoking
+     Bash::), then '$0' is set to the first argument after the string to
+     be executed, if one is present.  Otherwise, it is set to the
+     filename used to invoke Bash, as given by argument zero.
+
+
+File: bash.info,  Node: Shell Expansions,  Next: Redirections,  Prev: Shell Parameters,  Up: Basic Shell Features
+
+3.5 Shell Expansions
+====================
+
+Expansion is performed on the command line after it has been split into
+'token's.  There are seven kinds of expansion performed:
+
+   * brace expansion
+   * tilde expansion
+   * parameter and variable expansion
+   * command substitution
+   * arithmetic expansion
+   * word splitting
+   * filename expansion
+
+* Menu:
+
+* Brace Expansion::		Expansion of expressions within braces.
+* Tilde Expansion::		Expansion of the ~ character.
+* Shell Parameter Expansion::	How Bash expands variables to their values.
+* Command Substitution::	Using the output of a command as an argument.
+* Arithmetic Expansion::	How to use arithmetic in shell expansions.
+* Process Substitution::	A way to write and read to and from a
+				command.
+* Word Splitting::	How the results of expansion are split into separate
+			arguments.
+* Filename Expansion::	A shorthand for specifying filenames matching patterns.
+* Quote Removal::	How and when quote characters are removed from
+			words.
+
+   The order of expansions is: brace expansion; tilde expansion,
+parameter and variable expansion, arithmetic expansion, and command
+substitution (done in a left-to-right fashion); word splitting; and
+filename expansion.
+
+   On systems that can support it, there is an additional expansion
+available: PROCESS SUBSTITUTION.  This is performed at the same time as
+tilde, parameter, variable, and arithmetic expansion and command
+substitution.
+
+   After these expansions are performed, quote characters present in the
+original word are removed unless they have been quoted themselves (QUOTE
+REMOVAL).
+
+   Only brace expansion, word splitting, and filename expansion can
+increase the number of words of the expansion; other expansions expand a
+single word to a single word.  The only exceptions to this are the
+expansions of '"$@"' and '$*' (*note Special Parameters::), and
+'"${NAME[@]}"' and '${NAME[*]}' (*note Arrays::).
+
+   After all expansions, 'quote removal' (*note Quote Removal::) is
+performed.
+
+
+File: bash.info,  Node: Brace Expansion,  Next: Tilde Expansion,  Up: Shell Expansions
+
+3.5.1 Brace Expansion
+---------------------
+
+Brace expansion is a mechanism by which arbitrary strings may be
+generated.  This mechanism is similar to FILENAME EXPANSION (*note
+Filename Expansion::), but the filenames generated need not exist.
+Patterns to be brace expanded take the form of an optional PREAMBLE,
+followed by either a series of comma-separated strings or a sequence
+expression between a pair of braces, followed by an optional POSTSCRIPT.
+The preamble is prefixed to each string contained within the braces, and
+the postscript is then appended to each resulting string, expanding left
+to right.
+
+   Brace expansions may be nested.  The results of each expanded string
+are not sorted; left to right order is preserved.  For example,
+     bash$ echo a{d,c,b}e
+     ade ace abe
+
+   A sequence expression takes the form '{X..Y[..INCR]}', where X and Y
+are either integers or single characters, and INCR, an optional
+increment, is an integer.  When integers are supplied, the expression
+expands to each number between X and Y, inclusive.  Supplied integers
+may be prefixed with '0' to force each term to have the same width.
+When either X or Y begins with a zero, the shell attempts to force all
+generated terms to contain the same number of digits, zero-padding where
+necessary.  When characters are supplied, the expression expands to each
+character lexicographically between X and Y, inclusive, using the
+default C locale.  Note that both X and Y must be of the same type.
+When the increment is supplied, it is used as the difference between
+each term.  The default increment is 1 or -1 as appropriate.
+
+   Brace expansion is performed before any other expansions, and any
+characters special to other expansions are preserved in the result.  It
+is strictly textual.  Bash does not apply any syntactic interpretation
+to the context of the expansion or the text between the braces.
+
+   A correctly-formed brace expansion must contain unquoted opening and
+closing braces, and at least one unquoted comma or a valid sequence
+expression.  Any incorrectly formed brace expansion is left unchanged.
+
+   A { or ',' may be quoted with a backslash to prevent its being
+considered part of a brace expression.  To avoid conflicts with
+parameter expansion, the string '${' is not considered eligible for
+brace expansion, and inhibits brace expansion until the closing '}'.
+
+   This construct is typically used as shorthand when the common prefix
+of the strings to be generated is longer than in the above example:
+     mkdir /usr/local/src/bash/{old,new,dist,bugs}
+   or
+     chown root /usr/{ucb/{ex,edit},lib/{ex?.?*,how_ex}}
+
+
+File: bash.info,  Node: Tilde Expansion,  Next: Shell Parameter Expansion,  Prev: Brace Expansion,  Up: Shell Expansions
+
+3.5.2 Tilde Expansion
+---------------------
+
+If a word begins with an unquoted tilde character ('~'), all of the
+characters up to the first unquoted slash (or all characters, if there
+is no unquoted slash) are considered a TILDE-PREFIX.  If none of the
+characters in the tilde-prefix are quoted, the characters in the
+tilde-prefix following the tilde are treated as a possible LOGIN NAME.
+If this login name is the null string, the tilde is replaced with the
+value of the 'HOME' shell variable.  If 'HOME' is unset, the home
+directory of the user executing the shell is substituted instead.
+Otherwise, the tilde-prefix is replaced with the home directory
+associated with the specified login name.
+
+   If the tilde-prefix is '~+', the value of the shell variable 'PWD'
+replaces the tilde-prefix.  If the tilde-prefix is '~-', the value of
+the shell variable 'OLDPWD', if it is set, is substituted.
+
+   If the characters following the tilde in the tilde-prefix consist of
+a number N, optionally prefixed by a '+' or a '-', the tilde-prefix is
+replaced with the corresponding element from the directory stack, as it
+would be displayed by the 'dirs' builtin invoked with the characters
+following tilde in the tilde-prefix as an argument (*note The Directory
+Stack::).  If the tilde-prefix, sans the tilde, consists of a number
+without a leading '+' or '-', '+' is assumed.
+
+   If the login name is invalid, or the tilde expansion fails, the word
+is left unchanged.
+
+   Each variable assignment is checked for unquoted tilde-prefixes
+immediately following a ':' or the first '='.  In these cases, tilde
+expansion is also performed.  Consequently, one may use filenames with
+tildes in assignments to 'PATH', 'MAILPATH', and 'CDPATH', and the shell
+assigns the expanded value.
+
+   The following table shows how Bash treats unquoted tilde-prefixes:
+
+'~'
+     The value of '$HOME'
+'~/foo'
+     '$HOME/foo'
+
+'~fred/foo'
+     The subdirectory 'foo' of the home directory of the user 'fred'
+
+'~+/foo'
+     '$PWD/foo'
+
+'~-/foo'
+     '${OLDPWD-'~-'}/foo'
+
+'~N'
+     The string that would be displayed by 'dirs +N'
+
+'~+N'
+     The string that would be displayed by 'dirs +N'
+
+'~-N'
+     The string that would be displayed by 'dirs -N'
+
+   Bash also performs tilde expansion on words satisfying the conditions
+of variable assignments (*note Shell Parameters::) when they appear as
+arguments to simple commands.  Bash does not do this, except for the
+DECLARATION commands listed above, when in POSIX mode.
+
+
+File: bash.info,  Node: Shell Parameter Expansion,  Next: Command Substitution,  Prev: Tilde Expansion,  Up: Shell Expansions
+
+3.5.3 Shell Parameter Expansion
+-------------------------------
+
+The '$' character introduces parameter expansion, command substitution,
+or arithmetic expansion.  The parameter name or symbol to be expanded
+may be enclosed in braces, which are optional but serve to protect the
+variable to be expanded from characters immediately following it which
+could be interpreted as part of the name.
+
+   When braces are used, the matching ending brace is the first '}' not
+escaped by a backslash or within a quoted string, and not within an
+embedded arithmetic expansion, command substitution, or parameter
+expansion.
+
+   The basic form of parameter expansion is ${PARAMETER}.  The value of
+PARAMETER is substituted.  The PARAMETER is a shell parameter as
+described above (*note Shell Parameters::) or an array reference (*note
+Arrays::).  The braces are required when PARAMETER is a positional
+parameter with more than one digit, or when PARAMETER is followed by a
+character that is not to be interpreted as part of its name.
+
+   If the first character of PARAMETER is an exclamation point (!), and
+PARAMETER is not a NAMEREF, it introduces a level of indirection.  Bash
+uses the value formed by expanding the rest of PARAMETER as the new
+PARAMETER; this is then expanded and that value is used in the rest of
+the expansion, rather than the expansion of the original PARAMETER.
+This is known as 'indirect expansion'.  The value is subject to tilde
+expansion, parameter expansion, command substitution, and arithmetic
+expansion.  If PARAMETER is a nameref, this expands to the name of the
+variable referenced by PARAMETER instead of performing the complete
+indirect expansion.  The exceptions to this are the expansions of
+${!PREFIX*} and ${!NAME[@]} described below.  The exclamation point must
+immediately follow the left brace in order to introduce indirection.
+
+   In each of the cases below, WORD is subject to tilde expansion,
+parameter expansion, command substitution, and arithmetic expansion.
+
+   When not performing substring expansion, using the form described
+below (e.g., ':-'), Bash tests for a parameter that is unset or null.
+Omitting the colon results in a test only for a parameter that is unset.
+Put another way, if the colon is included, the operator tests for both
+PARAMETER's existence and that its value is not null; if the colon is
+omitted, the operator tests only for existence.
+
+'${PARAMETER:-WORD}'
+     If PARAMETER is unset or null, the expansion of WORD is
+     substituted.  Otherwise, the value of PARAMETER is substituted.
+
+'${PARAMETER:=WORD}'
+     If PARAMETER is unset or null, the expansion of WORD is assigned to
+     PARAMETER.  The value of PARAMETER is then substituted.  Positional
+     parameters and special parameters may not be assigned to in this
+     way.
+
+'${PARAMETER:?WORD}'
+     If PARAMETER is null or unset, the expansion of WORD (or a message
+     to that effect if WORD is not present) is written to the standard
+     error and the shell, if it is not interactive, exits.  Otherwise,
+     the value of PARAMETER is substituted.
+
+'${PARAMETER:+WORD}'
+     If PARAMETER is null or unset, nothing is substituted, otherwise
+     the expansion of WORD is substituted.
+
+'${PARAMETER:OFFSET}'
+'${PARAMETER:OFFSET:LENGTH}'
+     This is referred to as Substring Expansion.  It expands to up to
+     LENGTH characters of the value of PARAMETER starting at the
+     character specified by OFFSET.  If PARAMETER is '@', an indexed
+     array subscripted by '@' or '*', or an associative array name, the
+     results differ as described below.  If LENGTH is omitted, it
+     expands to the substring of the value of PARAMETER starting at the
+     character specified by OFFSET and extending to the end of the
+     value.  LENGTH and OFFSET are arithmetic expressions (*note Shell
+     Arithmetic::).
+
+     If OFFSET evaluates to a number less than zero, the value is used
+     as an offset in characters from the end of the value of PARAMETER.
+     If LENGTH evaluates to a number less than zero, it is interpreted
+     as an offset in characters from the end of the value of PARAMETER
+     rather than a number of characters, and the expansion is the
+     characters between OFFSET and that result.  Note that a negative
+     offset must be separated from the colon by at least one space to
+     avoid being confused with the ':-' expansion.
+
+     Here are some examples illustrating substring expansion on
+     parameters and subscripted arrays:
+
+     $ string=01234567890abcdefgh
+     $ echo ${string:7}
+     7890abcdefgh
+     $ echo ${string:7:0}
+     
+     $ echo ${string:7:2}
+     78
+     $ echo ${string:7:-2}
+     7890abcdef
+     $ echo ${string: -7}
+     bcdefgh
+     $ echo ${string: -7:0}
+     
+     $ echo ${string: -7:2}
+     bc
+     $ echo ${string: -7:-2}
+     bcdef
+     $ set -- 01234567890abcdefgh
+     $ echo ${1:7}
+     7890abcdefgh
+     $ echo ${1:7:0}
+     
+     $ echo ${1:7:2}
+     78
+     $ echo ${1:7:-2}
+     7890abcdef
+     $ echo ${1: -7}
+     bcdefgh
+     $ echo ${1: -7:0}
+     
+     $ echo ${1: -7:2}
+     bc
+     $ echo ${1: -7:-2}
+     bcdef
+     $ array[0]=01234567890abcdefgh
+     $ echo ${array[0]:7}
+     7890abcdefgh
+     $ echo ${array[0]:7:0}
+     
+     $ echo ${array[0]:7:2}
+     78
+     $ echo ${array[0]:7:-2}
+     7890abcdef
+     $ echo ${array[0]: -7}
+     bcdefgh
+     $ echo ${array[0]: -7:0}
+     
+     $ echo ${array[0]: -7:2}
+     bc
+     $ echo ${array[0]: -7:-2}
+     bcdef
+
+     If PARAMETER is '@', the result is LENGTH positional parameters
+     beginning at OFFSET.  A negative OFFSET is taken relative to one
+     greater than the greatest positional parameter, so an offset of -1
+     evaluates to the last positional parameter.  It is an expansion
+     error if LENGTH evaluates to a number less than zero.
+
+     The following examples illustrate substring expansion using
+     positional parameters:
+
+     $ set -- 1 2 3 4 5 6 7 8 9 0 a b c d e f g h
+     $ echo ${@:7}
+     7 8 9 0 a b c d e f g h
+     $ echo ${@:7:0}
+     
+     $ echo ${@:7:2}
+     7 8
+     $ echo ${@:7:-2}
+     bash: -2: substring expression < 0
+     $ echo ${@: -7:2}
+     b c
+     $ echo ${@:0}
+     ./bash 1 2 3 4 5 6 7 8 9 0 a b c d e f g h
+     $ echo ${@:0:2}
+     ./bash 1
+     $ echo ${@: -7:0}
+     
+
+     If PARAMETER is an indexed array name subscripted by '@' or '*',
+     the result is the LENGTH members of the array beginning with
+     '${PARAMETER[OFFSET]}'.  A negative OFFSET is taken relative to one
+     greater than the maximum index of the specified array.  It is an
+     expansion error if LENGTH evaluates to a number less than zero.
+
+     These examples show how you can use substring expansion with
+     indexed arrays:
+
+     $ array=(0 1 2 3 4 5 6 7 8 9 0 a b c d e f g h)
+     $ echo ${array[@]:7}
+     7 8 9 0 a b c d e f g h
+     $ echo ${array[@]:7:2}
+     7 8
+     $ echo ${array[@]: -7:2}
+     b c
+     $ echo ${array[@]: -7:-2}
+     bash: -2: substring expression < 0
+     $ echo ${array[@]:0}
+     0 1 2 3 4 5 6 7 8 9 0 a b c d e f g h
+     $ echo ${array[@]:0:2}
+     0 1
+     $ echo ${array[@]: -7:0}
+     
+
+     Substring expansion applied to an associative array produces
+     undefined results.
+
+     Substring indexing is zero-based unless the positional parameters
+     are used, in which case the indexing starts at 1 by default.  If
+     OFFSET is 0, and the positional parameters are used, '$0' is
+     prefixed to the list.
+
+'${!PREFIX*}'
+'${!PREFIX@}'
+     Expands to the names of variables whose names begin with PREFIX,
+     separated by the first character of the 'IFS' special variable.
+     When '@' is used and the expansion appears within double quotes,
+     each variable name expands to a separate word.
+
+'${!NAME[@]}'
+'${!NAME[*]}'
+     If NAME is an array variable, expands to the list of array indices
+     (keys) assigned in NAME.  If NAME is not an array, expands to 0 if
+     NAME is set and null otherwise.  When '@' is used and the expansion
+     appears within double quotes, each key expands to a separate word.
+
+'${#PARAMETER}'
+     The length in characters of the expanded value of PARAMETER is
+     substituted.  If PARAMETER is '*' or '@', the value substituted is
+     the number of positional parameters.  If PARAMETER is an array name
+     subscripted by '*' or '@', the value substituted is the number of
+     elements in the array.  If PARAMETER is an indexed array name
+     subscripted by a negative number, that number is interpreted as
+     relative to one greater than the maximum index of PARAMETER, so
+     negative indices count back from the end of the array, and an index
+     of -1 references the last element.
+
+'${PARAMETER#WORD}'
+'${PARAMETER##WORD}'
+     The WORD is expanded to produce a pattern and matched according to
+     the rules described below (*note Pattern Matching::).  If the
+     pattern matches the beginning of the expanded value of PARAMETER,
+     then the result of the expansion is the expanded value of PARAMETER
+     with the shortest matching pattern (the '#' case) or the longest
+     matching pattern (the '##' case) deleted.  If PARAMETER is '@' or
+     '*', the pattern removal operation is applied to each positional
+     parameter in turn, and the expansion is the resultant list.  If
+     PARAMETER is an array variable subscripted with '@' or '*', the
+     pattern removal operation is applied to each member of the array in
+     turn, and the expansion is the resultant list.
+
+'${PARAMETER%WORD}'
+'${PARAMETER%%WORD}'
+     The WORD is expanded to produce a pattern and matched according to
+     the rules described below (*note Pattern Matching::).  If the
+     pattern matches a trailing portion of the expanded value of
+     PARAMETER, then the result of the expansion is the value of
+     PARAMETER with the shortest matching pattern (the '%' case) or the
+     longest matching pattern (the '%%' case) deleted.  If PARAMETER is
+     '@' or '*', the pattern removal operation is applied to each
+     positional parameter in turn, and the expansion is the resultant
+     list.  If PARAMETER is an array variable subscripted with '@' or
+     '*', the pattern removal operation is applied to each member of the
+     array in turn, and the expansion is the resultant list.
+
+'${PARAMETER/PATTERN/STRING}'
+
+     The PATTERN is expanded to produce a pattern just as in filename
+     expansion.  PARAMETER is expanded and the longest match of PATTERN
+     against its value is replaced with STRING.  The match is performed
+     according to the rules described below (*note Pattern Matching::).
+     If PATTERN begins with '/', all matches of PATTERN are replaced
+     with STRING.  Normally only the first match is replaced.  If
+     PATTERN begins with '#', it must match at the beginning of the
+     expanded value of PARAMETER.  If PATTERN begins with '%', it must
+     match at the end of the expanded value of PARAMETER.  If STRING is
+     null, matches of PATTERN are deleted and the '/' following PATTERN
+     may be omitted.  If the 'nocasematch' shell option (see the
+     description of 'shopt' in *note The Shopt Builtin::) is enabled,
+     the match is performed without regard to the case of alphabetic
+     characters.  If PARAMETER is '@' or '*', the substitution operation
+     is applied to each positional parameter in turn, and the expansion
+     is the resultant list.  If PARAMETER is an array variable
+     subscripted with '@' or '*', the substitution operation is applied
+     to each member of the array in turn, and the expansion is the
+     resultant list.
+
+'${PARAMETER^PATTERN}'
+'${PARAMETER^^PATTERN}'
+'${PARAMETER,PATTERN}'
+'${PARAMETER,,PATTERN}'
+     This expansion modifies the case of alphabetic characters in
+     PARAMETER.  The PATTERN is expanded to produce a pattern just as in
+     filename expansion.  Each character in the expanded value of
+     PARAMETER is tested against PATTERN, and, if it matches the
+     pattern, its case is converted.  The pattern should not attempt to
+     match more than one character.  The '^' operator converts lowercase
+     letters matching PATTERN to uppercase; the ',' operator converts
+     matching uppercase letters to lowercase.  The '^^' and ',,'
+     expansions convert each matched character in the expanded value;
+     the '^' and ',' expansions match and convert only the first
+     character in the expanded value.  If PATTERN is omitted, it is
+     treated like a '?', which matches every character.  If PARAMETER is
+     '@' or '*', the case modification operation is applied to each
+     positional parameter in turn, and the expansion is the resultant
+     list.  If PARAMETER is an array variable subscripted with '@' or
+     '*', the case modification operation is applied to each member of
+     the array in turn, and the expansion is the resultant list.
+
+'${PARAMETER@OPERATOR}'
+     The expansion is either a transformation of the value of PARAMETER
+     or information about PARAMETER itself, depending on the value of
+     OPERATOR.  Each OPERATOR is a single letter:
+
+     'U'
+          The expansion is a string that is the value of PARAMETER with
+          lowercase alphabetic characters converted to uppercase.
+     'u'
+          The expansion is a string that is the value of PARAMETER with
+          the first character converted to uppercase, if it is
+          alphabetic.
+     'L'
+          The expansion is a string that is the value of PARAMETER with
+          uppercase alphabetic characters converted to lowercase.
+     'Q'
+          The expansion is a string that is the value of PARAMETER
+          quoted in a format that can be reused as input.
+     'E'
+          The expansion is a string that is the value of PARAMETER with
+          backslash escape sequences expanded as with the '$'...''
+          quoting mechanism.
+     'P'
+          The expansion is a string that is the result of expanding the
+          value of PARAMETER as if it were a prompt string (*note
+          Controlling the Prompt::).
+     'A'
+          The expansion is a string in the form of an assignment
+          statement or 'declare' command that, if evaluated, will
+          recreate PARAMETER with its attributes and value.
+     'K'
+          Produces a possibly-quoted version of the value of PARAMETER,
+          except that it prints the values of indexed and associative
+          arrays as a sequence of quoted key-value pairs (*note
+          Arrays::).
+     'a'
+          The expansion is a string consisting of flag values
+          representing PARAMETER's attributes.
+
+     If PARAMETER is '@' or '*', the operation is applied to each
+     positional parameter in turn, and the expansion is the resultant
+     list.  If PARAMETER is an array variable subscripted with '@' or
+     '*', the operation is applied to each member of the array in turn,
+     and the expansion is the resultant list.
+
+     The result of the expansion is subject to word splitting and
+     filename expansion as described below.
+
+
+File: bash.info,  Node: Command Substitution,  Next: Arithmetic Expansion,  Prev: Shell Parameter Expansion,  Up: Shell Expansions
+
+3.5.4 Command Substitution
+--------------------------
+
+Command substitution allows the output of a command to replace the
+command itself.  Command substitution occurs when a command is enclosed
+as follows:
+     $(COMMAND)
+or
+     `COMMAND`
+
+Bash performs the expansion by executing COMMAND in a subshell
+environment and replacing the command substitution with the standard
+output of the command, with any trailing newlines deleted.  Embedded
+newlines are not deleted, but they may be removed during word splitting.
+The command substitution '$(cat FILE)' can be replaced by the equivalent
+but faster '$(< FILE)'.
+
+   When the old-style backquote form of substitution is used, backslash
+retains its literal meaning except when followed by '$', '`', or '\'.
+The first backquote not preceded by a backslash terminates the command
+substitution.  When using the '$(COMMAND)' form, all characters between
+the parentheses make up the command; none are treated specially.
+
+   Command substitutions may be nested.  To nest when using the
+backquoted form, escape the inner backquotes with backslashes.
+
+   If the substitution appears within double quotes, word splitting and
+filename expansion are not performed on the results.
+
+
+File: bash.info,  Node: Arithmetic Expansion,  Next: Process Substitution,  Prev: Command Substitution,  Up: Shell Expansions
+
+3.5.5 Arithmetic Expansion
+--------------------------
+
+Arithmetic expansion allows the evaluation of an arithmetic expression
+and the substitution of the result.  The format for arithmetic expansion
+is:
+
+     $(( EXPRESSION ))
+
+   The expression is treated as if it were within double quotes, but a
+double quote inside the parentheses is not treated specially.  All
+tokens in the expression undergo parameter and variable expansion,
+command substitution, and quote removal.  The result is treated as the
+arithmetic expression to be evaluated.  Arithmetic expansions may be
+nested.
+
+   The evaluation is performed according to the rules listed below
+(*note Shell Arithmetic::).  If the expression is invalid, Bash prints a
+message indicating failure to the standard error and no substitution
+occurs.
+
+
+File: bash.info,  Node: Process Substitution,  Next: Word Splitting,  Prev: Arithmetic Expansion,  Up: Shell Expansions
+
+3.5.6 Process Substitution
+--------------------------
+
+Process substitution allows a process's input or output to be referred
+to using a filename.  It takes the form of
+     <(LIST)
+or
+     >(LIST)
+The process LIST is run asynchronously, and its input or output appears
+as a filename.  This filename is passed as an argument to the current
+command as the result of the expansion.  If the '>(LIST)' form is used,
+writing to the file will provide input for LIST.  If the '<(LIST)' form
+is used, the file passed as an argument should be read to obtain the
+output of LIST.  Note that no space may appear between the '<' or '>'
+and the left parenthesis, otherwise the construct would be interpreted
+as a redirection.  Process substitution is supported on systems that
+support named pipes (FIFOs) or the '/dev/fd' method of naming open
+files.
+
+   When available, process substitution is performed simultaneously with
+parameter and variable expansion, command substitution, and arithmetic
+expansion.
+
+
+File: bash.info,  Node: Word Splitting,  Next: Filename Expansion,  Prev: Process Substitution,  Up: Shell Expansions
+
+3.5.7 Word Splitting
+--------------------
+
+The shell scans the results of parameter expansion, command
+substitution, and arithmetic expansion that did not occur within double
+quotes for word splitting.
+
+   The shell treats each character of '$IFS' as a delimiter, and splits
+the results of the other expansions into words using these characters as
+field terminators.  If 'IFS' is unset, or its value is exactly
+'<space><tab><newline>', the default, then sequences of ' <space>',
+'<tab>', and '<newline>' at the beginning and end of the results of the
+previous expansions are ignored, and any sequence of 'IFS' characters
+not at the beginning or end serves to delimit words.  If 'IFS' has a
+value other than the default, then sequences of the whitespace
+characters 'space', 'tab', and 'newline' are ignored at the beginning
+and end of the word, as long as the whitespace character is in the value
+of 'IFS' (an 'IFS' whitespace character).  Any character in 'IFS' that
+is not 'IFS' whitespace, along with any adjacent 'IFS' whitespace
+characters, delimits a field.  A sequence of 'IFS' whitespace characters
+is also treated as a delimiter.  If the value of 'IFS' is null, no word
+splitting occurs.
+
+   Explicit null arguments ('""' or '''') are retained and passed to
+commands as empty strings.  Unquoted implicit null arguments, resulting
+from the expansion of parameters that have no values, are removed.  If a
+parameter with no value is expanded within double quotes, a null
+argument results and is retained and passed to a command as an empty
+string.  When a quoted null argument appears as part of a word whose
+expansion is non-null, the null argument is removed.  That is, the word
+'-d''' becomes '-d' after word splitting and null argument removal.
+
+   Note that if no expansion occurs, no splitting is performed.
+
+
+File: bash.info,  Node: Filename Expansion,  Next: Quote Removal,  Prev: Word Splitting,  Up: Shell Expansions
+
+3.5.8 Filename Expansion
+------------------------
+
+* Menu:
+
+* Pattern Matching::	How the shell matches patterns.
+
+After word splitting, unless the '-f' option has been set (*note The Set
+Builtin::), Bash scans each word for the characters '*', '?', and '['.
+If one of these characters appears, and is not quoted, then the word is
+regarded as a PATTERN, and replaced with an alphabetically sorted list
+of filenames matching the pattern (*note Pattern Matching::).  If no
+matching filenames are found, and the shell option 'nullglob' is
+disabled, the word is left unchanged.  If the 'nullglob' option is set,
+and no matches are found, the word is removed.  If the 'failglob' shell
+option is set, and no matches are found, an error message is printed and
+the command is not executed.  If the shell option 'nocaseglob' is
+enabled, the match is performed without regard to the case of alphabetic
+characters.
+
+   When a pattern is used for filename expansion, the character '.' at
+the start of a filename or immediately following a slash must be matched
+explicitly, unless the shell option 'dotglob' is set.  The filenames '.'
+and '..' must always be matched explicitly, even if 'dotglob' is set.
+In other cases, the '.' character is not treated specially.
+
+   When matching a filename, the slash character must always be matched
+explicitly by a slash in the pattern, but in other matching contexts it
+can be matched by a special pattern character as described below (*note
+Pattern Matching::).
+
+   See the description of 'shopt' in *note The Shopt Builtin::, for a
+description of the 'nocaseglob', 'nullglob', 'failglob', and 'dotglob'
+options.
+
+   The 'GLOBIGNORE' shell variable may be used to restrict the set of
+file names matching a pattern.  If 'GLOBIGNORE' is set, each matching
+file name that also matches one of the patterns in 'GLOBIGNORE' is
+removed from the list of matches.  If the 'nocaseglob' option is set,
+the matching against the patterns in 'GLOBIGNORE' is performed without
+regard to case.  The filenames '.' and '..' are always ignored when
+'GLOBIGNORE' is set and not null.  However, setting 'GLOBIGNORE' to a
+non-null value has the effect of enabling the 'dotglob' shell option, so
+all other filenames beginning with a '.' will match.  To get the old
+behavior of ignoring filenames beginning with a '.', make '.*' one of
+the patterns in 'GLOBIGNORE'.  The 'dotglob' option is disabled when
+'GLOBIGNORE' is unset.
+
+
+File: bash.info,  Node: Pattern Matching,  Up: Filename Expansion
+
+3.5.8.1 Pattern Matching
+........................
+
+Any character that appears in a pattern, other than the special pattern
+characters described below, matches itself.  The NUL character may not
+occur in a pattern.  A backslash escapes the following character; the
+escaping backslash is discarded when matching.  The special pattern
+characters must be quoted if they are to be matched literally.
+
+   The special pattern characters have the following meanings:
+'*'
+     Matches any string, including the null string.  When the 'globstar'
+     shell option is enabled, and '*' is used in a filename expansion
+     context, two adjacent '*'s used as a single pattern will match all
+     files and zero or more directories and subdirectories.  If followed
+     by a '/', two adjacent '*'s will match only directories and
+     subdirectories.
+'?'
+     Matches any single character.
+'[...]'
+     Matches any one of the enclosed characters.  A pair of characters
+     separated by a hyphen denotes a RANGE EXPRESSION; any character
+     that falls between those two characters, inclusive, using the
+     current locale's collating sequence and character set, is matched.
+     If the first character following the '[' is a '!' or a '^' then any
+     character not enclosed is matched.  A '-' may be matched by
+     including it as the first or last character in the set.  A ']' may
+     be matched by including it as the first character in the set.  The
+     sorting order of characters in range expressions is determined by
+     the current locale and the values of the 'LC_COLLATE' and 'LC_ALL'
+     shell variables, if set.
+
+     For example, in the default C locale, '[a-dx-z]' is equivalent to
+     '[abcdxyz]'.  Many locales sort characters in dictionary order, and
+     in these locales '[a-dx-z]' is typically not equivalent to
+     '[abcdxyz]'; it might be equivalent to '[aBbCcDdxXyYz]', for
+     example.  To obtain the traditional interpretation of ranges in
+     bracket expressions, you can force the use of the C locale by
+     setting the 'LC_COLLATE' or 'LC_ALL' environment variable to the
+     value 'C', or enable the 'globasciiranges' shell option.
+
+     Within '[' and ']', CHARACTER CLASSES can be specified using the
+     syntax '[:'CLASS':]', where CLASS is one of the following classes
+     defined in the POSIX standard:
+          alnum   alpha   ascii   blank   cntrl   digit   graph   lower
+          print   punct   space   upper   word    xdigit
+     A character class matches any character belonging to that class.
+     The 'word' character class matches letters, digits, and the
+     character '_'.
+
+     Within '[' and ']', an EQUIVALENCE CLASS can be specified using the
+     syntax '[='C'=]', which matches all characters with the same
+     collation weight (as defined by the current locale) as the
+     character C.
+
+     Within '[' and ']', the syntax '[.'SYMBOL'.]' matches the collating
+     symbol SYMBOL.
+
+   If the 'extglob' shell option is enabled using the 'shopt' builtin,
+several extended pattern matching operators are recognized.  In the
+following description, a PATTERN-LIST is a list of one or more patterns
+separated by a '|'.  Composite patterns may be formed using one or more
+of the following sub-patterns:
+
+'?(PATTERN-LIST)'
+     Matches zero or one occurrence of the given patterns.
+
+'*(PATTERN-LIST)'
+     Matches zero or more occurrences of the given patterns.
+
+'+(PATTERN-LIST)'
+     Matches one or more occurrences of the given patterns.
+
+'@(PATTERN-LIST)'
+     Matches one of the given patterns.
+
+'!(PATTERN-LIST)'
+     Matches anything except one of the given patterns.
+
+   Complicated extended pattern matching against long strings is slow,
+especially when the patterns contain alternations and the strings
+contain multiple matches.  Using separate matches against shorter
+strings, or using arrays of strings instead of a single long string, may
+be faster.
+
+
+File: bash.info,  Node: Quote Removal,  Prev: Filename Expansion,  Up: Shell Expansions
+
+3.5.9 Quote Removal
+-------------------
+
+After the preceding expansions, all unquoted occurrences of the
+characters '\', ''', and '"' that did not result from one of the above
+expansions are removed.
+
+
+File: bash.info,  Node: Redirections,  Next: Executing Commands,  Prev: Shell Expansions,  Up: Basic Shell Features
+
+3.6 Redirections
+================
+
+Before a command is executed, its input and output may be REDIRECTED
+using a special notation interpreted by the shell.  Redirection allows
+commands' file handles to be duplicated, opened, closed, made to refer
+to different files, and can change the files the command reads from and
+writes to.  Redirection may also be used to modify file handles in the
+current shell execution environment.  The following redirection
+operators may precede or appear anywhere within a simple command or may
+follow a command.  Redirections are processed in the order they appear,
+from left to right.
+
+   Each redirection that may be preceded by a file descriptor number may
+instead be preceded by a word of the form {VARNAME}.  In this case, for
+each redirection operator except >&- and <&-, the shell will allocate a
+file descriptor greater than 10 and assign it to {VARNAME}.  If >&- or
+<&- is preceded by {VARNAME}, the value of VARNAME defines the file
+descriptor to close.  If {VARNAME} is supplied, the redirection persists
+beyond the scope of the command, allowing the shell programmer to manage
+the file descriptor's lifetime manually.
+
+   In the following descriptions, if the file descriptor number is
+omitted, and the first character of the redirection operator is '<', the
+redirection refers to the standard input (file descriptor 0).  If the
+first character of the redirection operator is '>', the redirection
+refers to the standard output (file descriptor 1).
+
+   The word following the redirection operator in the following
+descriptions, unless otherwise noted, is subjected to brace expansion,
+tilde expansion, parameter expansion, command substitution, arithmetic
+expansion, quote removal, filename expansion, and word splitting.  If it
+expands to more than one word, Bash reports an error.
+
+   Note that the order of redirections is significant.  For example, the
+command
+     ls > DIRLIST 2>&1
+directs both standard output (file descriptor 1) and standard error
+(file descriptor 2) to the file DIRLIST, while the command
+     ls 2>&1 > DIRLIST
+directs only the standard output to file DIRLIST, because the standard
+error was made a copy of the standard output before the standard output
+was redirected to DIRLIST.
+
+   Bash handles several filenames specially when they are used in
+redirections, as described in the following table.  If the operating
+system on which Bash is running provides these special files, bash will
+use them; otherwise it will emulate them internally with the behavior
+described below.
+
+'/dev/fd/FD'
+     If FD is a valid integer, file descriptor FD is duplicated.
+
+'/dev/stdin'
+     File descriptor 0 is duplicated.
+
+'/dev/stdout'
+     File descriptor 1 is duplicated.
+
+'/dev/stderr'
+     File descriptor 2 is duplicated.
+
+'/dev/tcp/HOST/PORT'
+     If HOST is a valid hostname or Internet address, and PORT is an
+     integer port number or service name, Bash attempts to open the
+     corresponding TCP socket.
+
+'/dev/udp/HOST/PORT'
+     If HOST is a valid hostname or Internet address, and PORT is an
+     integer port number or service name, Bash attempts to open the
+     corresponding UDP socket.
+
+   A failure to open or create a file causes the redirection to fail.
+
+   Redirections using file descriptors greater than 9 should be used
+with care, as they may conflict with file descriptors the shell uses
+internally.
+
+3.6.1 Redirecting Input
+-----------------------
+
+Redirection of input causes the file whose name results from the
+expansion of WORD to be opened for reading on file descriptor 'n', or
+the standard input (file descriptor 0) if 'n' is not specified.
+
+   The general format for redirecting input is:
+     [N]<WORD
+
+3.6.2 Redirecting Output
+------------------------
+
+Redirection of output causes the file whose name results from the
+expansion of WORD to be opened for writing on file descriptor N, or the
+standard output (file descriptor 1) if N is not specified.  If the file
+does not exist it is created; if it does exist it is truncated to zero
+size.
+
+   The general format for redirecting output is:
+     [N]>[|]WORD
+
+   If the redirection operator is '>', and the 'noclobber' option to the
+'set' builtin has been enabled, the redirection will fail if the file
+whose name results from the expansion of WORD exists and is a regular
+file.  If the redirection operator is '>|', or the redirection operator
+is '>' and the 'noclobber' option is not enabled, the redirection is
+attempted even if the file named by WORD exists.
+
+3.6.3 Appending Redirected Output
+---------------------------------
+
+Redirection of output in this fashion causes the file whose name results
+from the expansion of WORD to be opened for appending on file descriptor
+N, or the standard output (file descriptor 1) if N is not specified.  If
+the file does not exist it is created.
+
+   The general format for appending output is:
+     [N]>>WORD
+
+3.6.4 Redirecting Standard Output and Standard Error
+----------------------------------------------------
+
+This construct allows both the standard output (file descriptor 1) and
+the standard error output (file descriptor 2) to be redirected to the
+file whose name is the expansion of WORD.
+
+   There are two formats for redirecting standard output and standard
+error:
+     &>WORD
+and
+     >&WORD
+Of the two forms, the first is preferred.  This is semantically
+equivalent to
+     >WORD 2>&1
+   When using the second form, WORD may not expand to a number or '-'.
+If it does, other redirection operators apply (see Duplicating File
+Descriptors below) for compatibility reasons.
+
+3.6.5 Appending Standard Output and Standard Error
+--------------------------------------------------
+
+This construct allows both the standard output (file descriptor 1) and
+the standard error output (file descriptor 2) to be appended to the file
+whose name is the expansion of WORD.
+
+   The format for appending standard output and standard error is:
+     &>>WORD
+This is semantically equivalent to
+     >>WORD 2>&1
+   (see Duplicating File Descriptors below).
+
+3.6.6 Here Documents
+--------------------
+
+This type of redirection instructs the shell to read input from the
+current source until a line containing only WORD (with no trailing
+blanks) is seen.  All of the lines read up to that point are then used
+as the standard input (or file descriptor N if N is specified) for a
+command.
+
+   The format of here-documents is:
+     [N]<<[-]WORD
+             HERE-DOCUMENT
+     DELIMITER
+
+   No parameter and variable expansion, command substitution, arithmetic
+expansion, or filename expansion is performed on WORD.  If any part of
+WORD is quoted, the DELIMITER is the result of quote removal on WORD,
+and the lines in the here-document are not expanded.  If WORD is
+unquoted, all lines of the here-document are subjected to parameter
+expansion, command substitution, and arithmetic expansion, the character
+sequence '\newline' is ignored, and '\' must be used to quote the
+characters '\', '$', and '`'.
+
+   If the redirection operator is '<<-', then all leading tab characters
+are stripped from input lines and the line containing DELIMITER.  This
+allows here-documents within shell scripts to be indented in a natural
+fashion.
+
+3.6.7 Here Strings
+------------------
+
+A variant of here documents, the format is:
+     [N]<<< WORD
+
+   The WORD undergoes tilde expansion, parameter and variable expansion,
+command substitution, arithmetic expansion, and quote removal.  Filename
+expansion and word splitting are not performed.  The result is supplied
+as a single string, with a newline appended, to the command on its
+standard input (or file descriptor N if N is specified).
+
+3.6.8 Duplicating File Descriptors
+----------------------------------
+
+The redirection operator
+     [N]<&WORD
+is used to duplicate input file descriptors.  If WORD expands to one or
+more digits, the file descriptor denoted by N is made to be a copy of
+that file descriptor.  If the digits in WORD do not specify a file
+descriptor open for input, a redirection error occurs.  If WORD
+evaluates to '-', file descriptor N is closed.  If N is not specified,
+the standard input (file descriptor 0) is used.
+
+   The operator
+     [N]>&WORD
+is used similarly to duplicate output file descriptors.  If N is not
+specified, the standard output (file descriptor 1) is used.  If the
+digits in WORD do not specify a file descriptor open for output, a
+redirection error occurs.  If WORD evaluates to '-', file descriptor N
+is closed.  As a special case, if N is omitted, and WORD does not expand
+to one or more digits or '-', the standard output and standard error are
+redirected as described previously.
+
+3.6.9 Moving File Descriptors
+-----------------------------
+
+The redirection operator
+     [N]<&DIGIT-
+moves the file descriptor DIGIT to file descriptor N, or the standard
+input (file descriptor 0) if N is not specified.  DIGIT is closed after
+being duplicated to N.
+
+   Similarly, the redirection operator
+     [N]>&DIGIT-
+moves the file descriptor DIGIT to file descriptor N, or the standard
+output (file descriptor 1) if N is not specified.
+
+3.6.10 Opening File Descriptors for Reading and Writing
+-------------------------------------------------------
+
+The redirection operator
+     [N]<>WORD
+causes the file whose name is the expansion of WORD to be opened for
+both reading and writing on file descriptor N, or on file descriptor 0
+if N is not specified.  If the file does not exist, it is created.
+
+
+File: bash.info,  Node: Executing Commands,  Next: Shell Scripts,  Prev: Redirections,  Up: Basic Shell Features
+
+3.7 Executing Commands
+======================
+
+* Menu:
+
+* Simple Command Expansion::	How Bash expands simple commands before
+				executing them.
+* Command Search and Execution::	How Bash finds commands and runs them.
+* Command Execution Environment::	The environment in which Bash
+					executes commands that are not
+					shell builtins.
+* Environment::		The environment given to a command.
+* Exit Status::		The status returned by commands and how Bash
+			interprets it.
+* Signals::		What happens when Bash or a command it runs
+			receives a signal.
+
+
+File: bash.info,  Node: Simple Command Expansion,  Next: Command Search and Execution,  Up: Executing Commands
+
+3.7.1 Simple Command Expansion
+------------------------------
+
+When a simple command is executed, the shell performs the following
+expansions, assignments, and redirections, from left to right, in the
+following order.
+
+  1. The words that the parser has marked as variable assignments (those
+     preceding the command name) and redirections are saved for later
+     processing.
+
+  2. The words that are not variable assignments or redirections are
+     expanded (*note Shell Expansions::).  If any words remain after
+     expansion, the first word is taken to be the name of the command
+     and the remaining words are the arguments.
+
+  3. Redirections are performed as described above (*note
+     Redirections::).
+
+  4. The text after the '=' in each variable assignment undergoes tilde
+     expansion, parameter expansion, command substitution, arithmetic
+     expansion, and quote removal before being assigned to the variable.
+
+   If no command name results, the variable assignments affect the
+current shell environment.  Otherwise, the variables are added to the
+environment of the executed command and do not affect the current shell
+environment.  If any of the assignments attempts to assign a value to a
+readonly variable, an error occurs, and the command exits with a
+non-zero status.
+
+   If no command name results, redirections are performed, but do not
+affect the current shell environment.  A redirection error causes the
+command to exit with a non-zero status.
+
+   If there is a command name left after expansion, execution proceeds
+as described below.  Otherwise, the command exits.  If one of the
+expansions contained a command substitution, the exit status of the
+command is the exit status of the last command substitution performed.
+If there were no command substitutions, the command exits with a status
+of zero.
+
+
+File: bash.info,  Node: Command Search and Execution,  Next: Command Execution Environment,  Prev: Simple Command Expansion,  Up: Executing Commands
+
+3.7.2 Command Search and Execution
+----------------------------------
+
+After a command has been split into words, if it results in a simple
+command and an optional list of arguments, the following actions are
+taken.
+
+  1. If the command name contains no slashes, the shell attempts to
+     locate it.  If there exists a shell function by that name, that
+     function is invoked as described in *note Shell Functions::.
+
+  2. If the name does not match a function, the shell searches for it in
+     the list of shell builtins.  If a match is found, that builtin is
+     invoked.
+
+  3. If the name is neither a shell function nor a builtin, and contains
+     no slashes, Bash searches each element of '$PATH' for a directory
+     containing an executable file by that name.  Bash uses a hash table
+     to remember the full pathnames of executable files to avoid
+     multiple 'PATH' searches (see the description of 'hash' in *note
+     Bourne Shell Builtins::).  A full search of the directories in
+     '$PATH' is performed only if the command is not found in the hash
+     table.  If the search is unsuccessful, the shell searches for a
+     defined shell function named 'command_not_found_handle'.  If that
+     function exists, it is invoked in a separate execution environment
+     with the original command and the original command's arguments as
+     its arguments, and the function's exit status becomes the exit
+     status of that subshell.  If that function is not defined, the
+     shell prints an error message and returns an exit status of 127.
+
+  4. If the search is successful, or if the command name contains one or
+     more slashes, the shell executes the named program in a separate
+     execution environment.  Argument 0 is set to the name given, and
+     the remaining arguments to the command are set to the arguments
+     supplied, if any.
+
+  5. If this execution fails because the file is not in executable
+     format, and the file is not a directory, it is assumed to be a
+     SHELL SCRIPT and the shell executes it as described in *note Shell
+     Scripts::.
+
+  6. If the command was not begun asynchronously, the shell waits for
+     the command to complete and collects its exit status.
+
+
+File: bash.info,  Node: Command Execution Environment,  Next: Environment,  Prev: Command Search and Execution,  Up: Executing Commands
+
+3.7.3 Command Execution Environment
+-----------------------------------
+
+The shell has an EXECUTION ENVIRONMENT, which consists of the following:
+
+   * open files inherited by the shell at invocation, as modified by
+     redirections supplied to the 'exec' builtin
+
+   * the current working directory as set by 'cd', 'pushd', or 'popd',
+     or inherited by the shell at invocation
+
+   * the file creation mode mask as set by 'umask' or inherited from the
+     shell's parent
+
+   * current traps set by 'trap'
+
+   * shell parameters that are set by variable assignment or with 'set'
+     or inherited from the shell's parent in the environment
+
+   * shell functions defined during execution or inherited from the
+     shell's parent in the environment
+
+   * options enabled at invocation (either by default or with
+     command-line arguments) or by 'set'
+
+   * options enabled by 'shopt' (*note The Shopt Builtin::)
+
+   * shell aliases defined with 'alias' (*note Aliases::)
+
+   * various process IDs, including those of background jobs (*note
+     Lists::), the value of '$$', and the value of '$PPID'
+
+   When a simple command other than a builtin or shell function is to be
+executed, it is invoked in a separate execution environment that
+consists of the following.  Unless otherwise noted, the values are
+inherited from the shell.
+
+   * the shell's open files, plus any modifications and additions
+     specified by redirections to the command
+
+   * the current working directory
+
+   * the file creation mode mask
+
+   * shell variables and functions marked for export, along with
+     variables exported for the command, passed in the environment
+     (*note Environment::)
+
+   * traps caught by the shell are reset to the values inherited from
+     the shell's parent, and traps ignored by the shell are ignored
+
+   A command invoked in this separate environment cannot affect the
+shell's execution environment.
+
+   Command substitution, commands grouped with parentheses, and
+asynchronous commands are invoked in a subshell environment that is a
+duplicate of the shell environment, except that traps caught by the
+shell are reset to the values that the shell inherited from its parent
+at invocation.  Builtin commands that are invoked as part of a pipeline
+are also executed in a subshell environment.  Changes made to the
+subshell environment cannot affect the shell's execution environment.
+
+   Subshells spawned to execute command substitutions inherit the value
+of the '-e' option from the parent shell.  When not in POSIX mode, Bash
+clears the '-e' option in such subshells.
+
+   If a command is followed by a '&' and job control is not active, the
+default standard input for the command is the empty file '/dev/null'.
+Otherwise, the invoked command inherits the file descriptors of the
+calling shell as modified by redirections.
+
+
+File: bash.info,  Node: Environment,  Next: Exit Status,  Prev: Command Execution Environment,  Up: Executing Commands
+
+3.7.4 Environment
+-----------------
+
+When a program is invoked it is given an array of strings called the
+ENVIRONMENT.  This is a list of name-value pairs, of the form
+'name=value'.
+
+   Bash provides several ways to manipulate the environment.  On
+invocation, the shell scans its own environment and creates a parameter
+for each name found, automatically marking it for EXPORT to child
+processes.  Executed commands inherit the environment.  The 'export' and
+'declare -x' commands allow parameters and functions to be added to and
+deleted from the environment.  If the value of a parameter in the
+environment is modified, the new value becomes part of the environment,
+replacing the old.  The environment inherited by any executed command
+consists of the shell's initial environment, whose values may be
+modified in the shell, less any pairs removed by the 'unset' and 'export
+-n' commands, plus any additions via the 'export' and 'declare -x'
+commands.
+
+   The environment for any simple command or function may be augmented
+temporarily by prefixing it with parameter assignments, as described in
+*note Shell Parameters::.  These assignment statements affect only the
+environment seen by that command.
+
+   If the '-k' option is set (*note The Set Builtin::), then all
+parameter assignments are placed in the environment for a command, not
+just those that precede the command name.
+
+   When Bash invokes an external command, the variable '$_' is set to
+the full pathname of the command and passed to that command in its
+environment.
+
+
+File: bash.info,  Node: Exit Status,  Next: Signals,  Prev: Environment,  Up: Executing Commands
+
+3.7.5 Exit Status
+-----------------
+
+The exit status of an executed command is the value returned by the
+WAITPID system call or equivalent function.  Exit statuses fall between
+0 and 255, though, as explained below, the shell may use values above
+125 specially.  Exit statuses from shell builtins and compound commands
+are also limited to this range.  Under certain circumstances, the shell
+will use special values to indicate specific failure modes.
+
+   For the shell's purposes, a command which exits with a zero exit
+status has succeeded.  A non-zero exit status indicates failure.  This
+seemingly counter-intuitive scheme is used so there is one well-defined
+way to indicate success and a variety of ways to indicate various
+failure modes.  When a command terminates on a fatal signal whose number
+is N, Bash uses the value 128+N as the exit status.
+
+   If a command is not found, the child process created to execute it
+returns a status of 127.  If a command is found but is not executable,
+the return status is 126.
+
+   If a command fails because of an error during expansion or
+redirection, the exit status is greater than zero.
+
+   The exit status is used by the Bash conditional commands (*note
+Conditional Constructs::) and some of the list constructs (*note
+Lists::).
+
+   All of the Bash builtins return an exit status of zero if they
+succeed and a non-zero status on failure, so they may be used by the
+conditional and list constructs.  All builtins return an exit status of
+2 to indicate incorrect usage, generally invalid options or missing
+arguments.
+
+
+File: bash.info,  Node: Signals,  Prev: Exit Status,  Up: Executing Commands
+
+3.7.6 Signals
+-------------
+
+When Bash is interactive, in the absence of any traps, it ignores
+'SIGTERM' (so that 'kill 0' does not kill an interactive shell), and
+'SIGINT' is caught and handled (so that the 'wait' builtin is
+interruptible).  When Bash receives a 'SIGINT', it breaks out of any
+executing loops.  In all cases, Bash ignores 'SIGQUIT'.  If job control
+is in effect (*note Job Control::), Bash ignores 'SIGTTIN', 'SIGTTOU',
+and 'SIGTSTP'.
+
+   Non-builtin commands started by Bash have signal handlers set to the
+values inherited by the shell from its parent.  When job control is not
+in effect, asynchronous commands ignore 'SIGINT' and 'SIGQUIT' in
+addition to these inherited handlers.  Commands run as a result of
+command substitution ignore the keyboard-generated job control signals
+'SIGTTIN', 'SIGTTOU', and 'SIGTSTP'.
+
+   The shell exits by default upon receipt of a 'SIGHUP'.  Before
+exiting, an interactive shell resends the 'SIGHUP' to all jobs, running
+or stopped.  Stopped jobs are sent 'SIGCONT' to ensure that they receive
+the 'SIGHUP'.  To prevent the shell from sending the 'SIGHUP' signal to
+a particular job, it should be removed from the jobs table with the
+'disown' builtin (*note Job Control Builtins::) or marked to not receive
+'SIGHUP' using 'disown -h'.
+
+   If the 'huponexit' shell option has been set with 'shopt' (*note The
+Shopt Builtin::), Bash sends a 'SIGHUP' to all jobs when an interactive
+login shell exits.
+
+   If Bash is waiting for a command to complete and receives a signal
+for which a trap has been set, the trap will not be executed until the
+command completes.  When Bash is waiting for an asynchronous command via
+the 'wait' builtin, the reception of a signal for which a trap has been
+set will cause the 'wait' builtin to return immediately with an exit
+status greater than 128, immediately after which the trap is executed.
+
+
+File: bash.info,  Node: Shell Scripts,  Prev: Executing Commands,  Up: Basic Shell Features
+
+3.8 Shell Scripts
+=================
+
+A shell script is a text file containing shell commands.  When such a
+file is used as the first non-option argument when invoking Bash, and
+neither the '-c' nor '-s' option is supplied (*note Invoking Bash::),
+Bash reads and executes commands from the file, then exits.  This mode
+of operation creates a non-interactive shell.  The shell first searches
+for the file in the current directory, and looks in the directories in
+'$PATH' if not found there.
+
+   When Bash runs a shell script, it sets the special parameter '0' to
+the name of the file, rather than the name of the shell, and the
+positional parameters are set to the remaining arguments, if any are
+given.  If no additional arguments are supplied, the positional
+parameters are unset.
+
+   A shell script may be made executable by using the 'chmod' command to
+turn on the execute bit.  When Bash finds such a file while searching
+the '$PATH' for a command, it spawns a subshell to execute it.  In other
+words, executing
+     filename ARGUMENTS
+is equivalent to executing
+     bash filename ARGUMENTS
+
+if 'filename' is an executable shell script.  This subshell
+reinitializes itself, so that the effect is as if a new shell had been
+invoked to interpret the script, with the exception that the locations
+of commands remembered by the parent (see the description of 'hash' in
+*note Bourne Shell Builtins::) are retained by the child.
+
+   Most versions of Unix make this a part of the operating system's
+command execution mechanism.  If the first line of a script begins with
+the two characters '#!', the remainder of the line specifies an
+interpreter for the program and, depending on the operating system, one
+or more optional arguments for that interpreter.  Thus, you can specify
+Bash, 'awk', Perl, or some other interpreter and write the rest of the
+script file in that language.
+
+   The arguments to the interpreter consist of one or more optional
+arguments following the interpreter name on the first line of the script
+file, followed by the name of the script file, followed by the rest of
+the arguments supplied to the script.  The details of how the
+interpreter line is split into an interpreter name and a set of
+arguments vary across systems.  Bash will perform this action on
+operating systems that do not handle it themselves.  Note that some
+older versions of Unix limit the interpreter name and a single argument
+to a maximum of 32 characters, so it's not portable to assume that using
+more than one argument will work.
+
+   Bash scripts often begin with '#! /bin/bash' (assuming that Bash has
+been installed in '/bin'), since this ensures that Bash will be used to
+interpret the script, even if it is executed under another shell.  It's
+a common idiom to use 'env' to find 'bash' even if it's been installed
+in another directory: '#!/usr/bin/env bash' will find the first
+occurrence of 'bash' in '$PATH'.
+
+
+File: bash.info,  Node: Shell Builtin Commands,  Next: Shell Variables,  Prev: Basic Shell Features,  Up: Top
+
+4 Shell Builtin Commands
+************************
+
+* Menu:
+
+* Bourne Shell Builtins::	Builtin commands inherited from the Bourne
+				Shell.
+* Bash Builtins::		Table of builtins specific to Bash.
+* Modifying Shell Behavior::	Builtins to modify shell attributes and
+				optional behavior.
+* Special Builtins::		Builtin commands classified specially by
+				POSIX.
+
+Builtin commands are contained within the shell itself.  When the name
+of a builtin command is used as the first word of a simple command
+(*note Simple Commands::), the shell executes the command directly,
+without invoking another program.  Builtin commands are necessary to
+implement functionality impossible or inconvenient to obtain with
+separate utilities.
+
+   This section briefly describes the builtins which Bash inherits from
+the Bourne Shell, as well as the builtin commands which are unique to or
+have been extended in Bash.
+
+   Several builtin commands are described in other chapters: builtin
+commands which provide the Bash interface to the job control facilities
+(*note Job Control Builtins::), the directory stack (*note Directory
+Stack Builtins::), the command history (*note Bash History Builtins::),
+and the programmable completion facilities (*note Programmable
+Completion Builtins::).
+
+   Many of the builtins have been extended by POSIX or Bash.
+
+   Unless otherwise noted, each builtin command documented as accepting
+options preceded by '-' accepts '--' to signify the end of the options.
+The ':', 'true', 'false', and 'test'/'[' builtins do not accept options
+and do not treat '--' specially.  The 'exit', 'logout', 'return',
+'break', 'continue', 'let', and 'shift' builtins accept and process
+arguments beginning with '-' without requiring '--'.  Other builtins
+that accept arguments but are not specified as accepting options
+interpret arguments beginning with '-' as invalid options and require
+'--' to prevent this interpretation.
+
+
+File: bash.info,  Node: Bourne Shell Builtins,  Next: Bash Builtins,  Up: Shell Builtin Commands
+
+4.1 Bourne Shell Builtins
+=========================
+
+The following shell builtin commands are inherited from the Bourne
+Shell.  These commands are implemented as specified by the POSIX
+standard.
+
+': (a colon)'
+          : [ARGUMENTS]
+
+     Do nothing beyond expanding ARGUMENTS and performing redirections.
+     The return status is zero.
+
+'. (a period)'
+          . FILENAME [ARGUMENTS]
+
+     Read and execute commands from the FILENAME argument in the current
+     shell context.  If FILENAME does not contain a slash, the 'PATH'
+     variable is used to find FILENAME.  When Bash is not in POSIX mode,
+     the current directory is searched if FILENAME is not found in
+     '$PATH'.  If any ARGUMENTS are supplied, they become the positional
+     parameters when FILENAME is executed.  Otherwise the positional
+     parameters are unchanged.  If the '-T' option is enabled, 'source'
+     inherits any trap on 'DEBUG'; if it is not, any 'DEBUG' trap string
+     is saved and restored around the call to 'source', and 'source'
+     unsets the 'DEBUG' trap while it executes.  If '-T' is not set, and
+     the sourced file changes the 'DEBUG' trap, the new value is
+     retained when 'source' completes.  The return status is the exit
+     status of the last command executed, or zero if no commands are
+     executed.  If FILENAME is not found, or cannot be read, the return
+     status is non-zero.  This builtin is equivalent to 'source'.
+
+'break'
+          break [N]
+
+     Exit from a 'for', 'while', 'until', or 'select' loop.  If N is
+     supplied, the Nth enclosing loop is exited.  N must be greater than
+     or equal to 1.  The return status is zero unless N is not greater
+     than or equal to 1.
+
+'cd'
+          cd [-L|[-P [-e]] [-@] [DIRECTORY]
+
+     Change the current working directory to DIRECTORY.  If DIRECTORY is
+     not supplied, the value of the 'HOME' shell variable is used.  Any
+     additional arguments following DIRECTORY are ignored.  If the shell
+     variable 'CDPATH' exists, it is used as a search path: each
+     directory name in 'CDPATH' is searched for DIRECTORY, with
+     alternative directory names in 'CDPATH' separated by a colon (':').
+     If DIRECTORY begins with a slash, 'CDPATH' is not used.
+
+     The '-P' option means to not follow symbolic links: symbolic links
+     are resolved while 'cd' is traversing DIRECTORY and before
+     processing an instance of '..' in DIRECTORY.
+
+     By default, or when the '-L' option is supplied, symbolic links in
+     DIRECTORY are resolved after 'cd' processes an instance of '..' in
+     DIRECTORY.
+
+     If '..' appears in DIRECTORY, it is processed by removing the
+     immediately preceding pathname component, back to a slash or the
+     beginning of DIRECTORY.
+
+     If the '-e' option is supplied with '-P' and the current working
+     directory cannot be successfully determined after a successful
+     directory change, 'cd' will return an unsuccessful status.
+
+     On systems that support it, the '-@' option presents the extended
+     attributes associated with a file as a directory.
+
+     If DIRECTORY is '-', it is converted to '$OLDPWD' before the
+     directory change is attempted.
+
+     If a non-empty directory name from 'CDPATH' is used, or if '-' is
+     the first argument, and the directory change is successful, the
+     absolute pathname of the new working directory is written to the
+     standard output.
+
+     The return status is zero if the directory is successfully changed,
+     non-zero otherwise.
+
+'continue'
+          continue [N]
+
+     Resume the next iteration of an enclosing 'for', 'while', 'until',
+     or 'select' loop.  If N is supplied, the execution of the Nth
+     enclosing loop is resumed.  N must be greater than or equal to 1.
+     The return status is zero unless N is not greater than or equal to
+     1.
+
+'eval'
+          eval [ARGUMENTS]
+
+     The arguments are concatenated together into a single command,
+     which is then read and executed, and its exit status returned as
+     the exit status of 'eval'.  If there are no arguments or only empty
+     arguments, the return status is zero.
+
+'exec'
+          exec [-cl] [-a NAME] [COMMAND [ARGUMENTS]]
+
+     If COMMAND is supplied, it replaces the shell without creating a
+     new process.  If the '-l' option is supplied, the shell places a
+     dash at the beginning of the zeroth argument passed to COMMAND.
+     This is what the 'login' program does.  The '-c' option causes
+     COMMAND to be executed with an empty environment.  If '-a' is
+     supplied, the shell passes NAME as the zeroth argument to COMMAND.
+     If COMMAND cannot be executed for some reason, a non-interactive
+     shell exits, unless the 'execfail' shell option is enabled.  In
+     that case, it returns failure.  An interactive shell returns
+     failure if the file cannot be executed.  A subshell exits
+     unconditionally if 'exec' fails.  If no COMMAND is specified,
+     redirections may be used to affect the current shell environment.
+     If there are no redirection errors, the return status is zero;
+     otherwise the return status is non-zero.
+
+'exit'
+          exit [N]
+
+     Exit the shell, returning a status of N to the shell's parent.  If
+     N is omitted, the exit status is that of the last command executed.
+     Any trap on 'EXIT' is executed before the shell terminates.
+
+'export'
+          export [-fn] [-p] [NAME[=VALUE]]
+
+     Mark each NAME to be passed to child processes in the environment.
+     If the '-f' option is supplied, the NAMEs refer to shell functions;
+     otherwise the names refer to shell variables.  The '-n' option
+     means to no longer mark each NAME for export.  If no NAMES are
+     supplied, or if the '-p' option is given, a list of names of all
+     exported variables is displayed.  The '-p' option displays output
+     in a form that may be reused as input.  If a variable name is
+     followed by =VALUE, the value of the variable is set to VALUE.
+
+     The return status is zero unless an invalid option is supplied, one
+     of the names is not a valid shell variable name, or '-f' is
+     supplied with a name that is not a shell function.
+
+'getopts'
+          getopts OPTSTRING NAME [ARG ...]
+
+     'getopts' is used by shell scripts to parse positional parameters.
+     OPTSTRING contains the option characters to be recognized; if a
+     character is followed by a colon, the option is expected to have an
+     argument, which should be separated from it by whitespace.  The
+     colon (':') and question mark ('?') may not be used as option
+     characters.  Each time it is invoked, 'getopts' places the next
+     option in the shell variable NAME, initializing NAME if it does not
+     exist, and the index of the next argument to be processed into the
+     variable 'OPTIND'.  'OPTIND' is initialized to 1 each time the
+     shell or a shell script is invoked.  When an option requires an
+     argument, 'getopts' places that argument into the variable
+     'OPTARG'.  The shell does not reset 'OPTIND' automatically; it must
+     be manually reset between multiple calls to 'getopts' within the
+     same shell invocation if a new set of parameters is to be used.
+
+     When the end of options is encountered, 'getopts' exits with a
+     return value greater than zero.  'OPTIND' is set to the index of
+     the first non-option argument, and NAME is set to '?'.
+
+     'getopts' normally parses the positional parameters, but if more
+     arguments are supplied as ARG values, 'getopts' parses those
+     instead.
+
+     'getopts' can report errors in two ways.  If the first character of
+     OPTSTRING is a colon, SILENT error reporting is used.  In normal
+     operation, diagnostic messages are printed when invalid options or
+     missing option arguments are encountered.  If the variable 'OPTERR'
+     is set to 0, no error messages will be displayed, even if the first
+     character of 'optstring' is not a colon.
+
+     If an invalid option is seen, 'getopts' places '?' into NAME and,
+     if not silent, prints an error message and unsets 'OPTARG'.  If
+     'getopts' is silent, the option character found is placed in
+     'OPTARG' and no diagnostic message is printed.
+
+     If a required argument is not found, and 'getopts' is not silent, a
+     question mark ('?') is placed in NAME, 'OPTARG' is unset, and a
+     diagnostic message is printed.  If 'getopts' is silent, then a
+     colon (':') is placed in NAME and 'OPTARG' is set to the option
+     character found.
+
+'hash'
+          hash [-r] [-p FILENAME] [-dt] [NAME]
+
+     Each time 'hash' is invoked, it remembers the full pathnames of the
+     commands specified as NAME arguments, so they need not be searched
+     for on subsequent invocations.  The commands are found by searching
+     through the directories listed in '$PATH'.  Any
+     previously-remembered pathname is discarded.  The '-p' option
+     inhibits the path search, and FILENAME is used as the location of
+     NAME.  The '-r' option causes the shell to forget all remembered
+     locations.  The '-d' option causes the shell to forget the
+     remembered location of each NAME.  If the '-t' option is supplied,
+     the full pathname to which each NAME corresponds is printed.  If
+     multiple NAME arguments are supplied with '-t', the NAME is printed
+     before the hashed full pathname.  The '-l' option causes output to
+     be displayed in a format that may be reused as input.  If no
+     arguments are given, or if only '-l' is supplied, information about
+     remembered commands is printed.  The return status is zero unless a
+     NAME is not found or an invalid option is supplied.
+
+'pwd'
+          pwd [-LP]
+
+     Print the absolute pathname of the current working directory.  If
+     the '-P' option is supplied, the pathname printed will not contain
+     symbolic links.  If the '-L' option is supplied, the pathname
+     printed may contain symbolic links.  The return status is zero
+     unless an error is encountered while determining the name of the
+     current directory or an invalid option is supplied.
+
+'readonly'
+          readonly [-aAf] [-p] [NAME[=VALUE]] ...
+
+     Mark each NAME as readonly.  The values of these names may not be
+     changed by subsequent assignment.  If the '-f' option is supplied,
+     each NAME refers to a shell function.  The '-a' option means each
+     NAME refers to an indexed array variable; the '-A' option means
+     each NAME refers to an associative array variable.  If both options
+     are supplied, '-A' takes precedence.  If no NAME arguments are
+     given, or if the '-p' option is supplied, a list of all readonly
+     names is printed.  The other options may be used to restrict the
+     output to a subset of the set of readonly names.  The '-p' option
+     causes output to be displayed in a format that may be reused as
+     input.  If a variable name is followed by =VALUE, the value of the
+     variable is set to VALUE.  The return status is zero unless an
+     invalid option is supplied, one of the NAME arguments is not a
+     valid shell variable or function name, or the '-f' option is
+     supplied with a name that is not a shell function.
+
+'return'
+          return [N]
+
+     Cause a shell function to stop executing and return the value N to
+     its caller.  If N is not supplied, the return value is the exit
+     status of the last command executed in the function.  If 'return'
+     is executed by a trap handler, the last command used to determine
+     the status is the last command executed before the trap handler.
+     If 'return' is executed during a 'DEBUG' trap, the last command
+     used to determine the status is the last command executed by the
+     trap handler before 'return' was invoked.  'return' may also be
+     used to terminate execution of a script being executed with the '.'
+     ('source') builtin, returning either N or the exit status of the
+     last command executed within the script as the exit status of the
+     script.  If N is supplied, the return value is its least
+     significant 8 bits.  Any command associated with the 'RETURN' trap
+     is executed before execution resumes after the function or script.
+     The return status is non-zero if 'return' is supplied a non-numeric
+     argument or is used outside a function and not during the execution
+     of a script by '.' or 'source'.
+
+'shift'
+          shift [N]
+
+     Shift the positional parameters to the left by N.  The positional
+     parameters from N+1 ... '$#' are renamed to '$1' ... '$#'-N.
+     Parameters represented by the numbers '$#' down to '$#'-N+1 are
+     unset.  N must be a non-negative number less than or equal to '$#'.
+     If N is zero or greater than '$#', the positional parameters are
+     not changed.  If N is not supplied, it is assumed to be 1.  The
+     return status is zero unless N is greater than '$#' or less than
+     zero, non-zero otherwise.
+
+'test'
+'['
+          test EXPR
+
+     Evaluate a conditional expression EXPR and return a status of 0
+     (true) or 1 (false).  Each operator and operand must be a separate
+     argument.  Expressions are composed of the primaries described
+     below in *note Bash Conditional Expressions::.  'test' does not
+     accept any options, nor does it accept and ignore an argument of
+     '--' as signifying the end of options.
+
+     When the '[' form is used, the last argument to the command must be
+     a ']'.
+
+     Expressions may be combined using the following operators, listed
+     in decreasing order of precedence.  The evaluation depends on the
+     number of arguments; see below.  Operator precedence is used when
+     there are five or more arguments.
+
+     '! EXPR'
+          True if EXPR is false.
+
+     '( EXPR )'
+          Returns the value of EXPR.  This may be used to override the
+          normal precedence of operators.
+
+     'EXPR1 -a EXPR2'
+          True if both EXPR1 and EXPR2 are true.
+
+     'EXPR1 -o EXPR2'
+          True if either EXPR1 or EXPR2 is true.
+
+     The 'test' and '[' builtins evaluate conditional expressions using
+     a set of rules based on the number of arguments.
+
+     0 arguments
+          The expression is false.
+
+     1 argument
+          The expression is true if, and only if, the argument is not
+          null.
+
+     2 arguments
+          If the first argument is '!', the expression is true if and
+          only if the second argument is null.  If the first argument is
+          one of the unary conditional operators (*note Bash Conditional
+          Expressions::), the expression is true if the unary test is
+          true.  If the first argument is not a valid unary operator,
+          the expression is false.
+
+     3 arguments
+          The following conditions are applied in the order listed.
+
+            1. If the second argument is one of the binary conditional
+               operators (*note Bash Conditional Expressions::), the
+               result of the expression is the result of the binary test
+               using the first and third arguments as operands.  The
+               '-a' and '-o' operators are considered binary operators
+               when there are three arguments.
+            2. If the first argument is '!', the value is the negation
+               of the two-argument test using the second and third
+               arguments.
+            3. If the first argument is exactly '(' and the third
+               argument is exactly ')', the result is the one-argument
+               test of the second argument.
+            4. Otherwise, the expression is false.
+
+     4 arguments
+          If the first argument is '!', the result is the negation of
+          the three-argument expression composed of the remaining
+          arguments.  Otherwise, the expression is parsed and evaluated
+          according to precedence using the rules listed above.
+
+     5 or more arguments
+          The expression is parsed and evaluated according to precedence
+          using the rules listed above.
+
+     When used with 'test' or '[', the '<' and '>' operators sort
+     lexicographically using ASCII ordering.
+
+'times'
+          times
+
+     Print out the user and system times used by the shell and its
+     children.  The return status is zero.
+
+'trap'
+          trap [-lp] [ARG] [SIGSPEC ...]
+
+     The commands in ARG are to be read and executed when the shell
+     receives signal SIGSPEC.  If ARG is absent (and there is a single
+     SIGSPEC) or equal to '-', each specified signal's disposition is
+     reset to the value it had when the shell was started.  If ARG is
+     the null string, then the signal specified by each SIGSPEC is
+     ignored by the shell and commands it invokes.  If ARG is not
+     present and '-p' has been supplied, the shell displays the trap
+     commands associated with each SIGSPEC.  If no arguments are
+     supplied, or only '-p' is given, 'trap' prints the list of commands
+     associated with each signal number in a form that may be reused as
+     shell input.  The '-l' option causes the shell to print a list of
+     signal names and their corresponding numbers.  Each SIGSPEC is
+     either a signal name or a signal number.  Signal names are case
+     insensitive and the 'SIG' prefix is optional.
+
+     If a SIGSPEC is '0' or 'EXIT', ARG is executed when the shell
+     exits.  If a SIGSPEC is 'DEBUG', the command ARG is executed before
+     every simple command, 'for' command, 'case' command, 'select'
+     command, every arithmetic 'for' command, and before the first
+     command executes in a shell function.  Refer to the description of
+     the 'extdebug' option to the 'shopt' builtin (*note The Shopt
+     Builtin::) for details of its effect on the 'DEBUG' trap.  If a
+     SIGSPEC is 'RETURN', the command ARG is executed each time a shell
+     function or a script executed with the '.' or 'source' builtins
+     finishes executing.
+
+     If a SIGSPEC is 'ERR', the command ARG is executed whenever a
+     pipeline (which may consist of a single simple command), a list, or
+     a compound command returns a non-zero exit status, subject to the
+     following conditions.  The 'ERR' trap is not executed if the failed
+     command is part of the command list immediately following an
+     'until' or 'while' keyword, part of the test following the 'if' or
+     'elif' reserved words, part of a command executed in a '&&' or '||'
+     list except the command following the final '&&' or '||', any
+     command in a pipeline but the last, or if the command's return
+     status is being inverted using '!'.  These are the same conditions
+     obeyed by the 'errexit' ('-e') option.
+
+     Signals ignored upon entry to the shell cannot be trapped or reset.
+     Trapped signals that are not being ignored are reset to their
+     original values in a subshell or subshell environment when one is
+     created.
+
+     The return status is zero unless a SIGSPEC does not specify a valid
+     signal.
+
+'umask'
+          umask [-p] [-S] [MODE]
+
+     Set the shell process's file creation mask to MODE.  If MODE begins
+     with a digit, it is interpreted as an octal number; if not, it is
+     interpreted as a symbolic mode mask similar to that accepted by the
+     'chmod' command.  If MODE is omitted, the current value of the mask
+     is printed.  If the '-S' option is supplied without a MODE
+     argument, the mask is printed in a symbolic format.  If the '-p'
+     option is supplied, and MODE is omitted, the output is in a form
+     that may be reused as input.  The return status is zero if the mode
+     is successfully changed or if no MODE argument is supplied, and
+     non-zero otherwise.
+
+     Note that when the mode is interpreted as an octal number, each
+     number of the umask is subtracted from '7'.  Thus, a umask of '022'
+     results in permissions of '755'.
+
+'unset'
+          unset [-fnv] [NAME]
+
+     Remove each variable or function NAME.  If the '-v' option is
+     given, each NAME refers to a shell variable and that variable is
+     removed.  If the '-f' option is given, the NAMEs refer to shell
+     functions, and the function definition is removed.  If the '-n'
+     option is supplied, and NAME is a variable with the NAMEREF
+     attribute, NAME will be unset rather than the variable it
+     references.  '-n' has no effect if the '-f' option is supplied.  If
+     no options are supplied, each NAME refers to a variable; if there
+     is no variable by that name, a function with that name, if any, is
+     unset.  Readonly variables and functions may not be unset.  Some
+     shell variables lose their special behavior if they are unset; such
+     behavior is noted in the description of the individual variables.
+     The return status is zero unless a NAME is readonly.
+
+
+File: bash.info,  Node: Bash Builtins,  Next: Modifying Shell Behavior,  Prev: Bourne Shell Builtins,  Up: Shell Builtin Commands
+
+4.2 Bash Builtin Commands
+=========================
+
+This section describes builtin commands which are unique to or have been
+extended in Bash.  Some of these commands are specified in the POSIX
+standard.
+
+'alias'
+          alias [-p] [NAME[=VALUE] ...]
+
+     Without arguments or with the '-p' option, 'alias' prints the list
+     of aliases on the standard output in a form that allows them to be
+     reused as input.  If arguments are supplied, an alias is defined
+     for each NAME whose VALUE is given.  If no VALUE is given, the name
+     and value of the alias is printed.  Aliases are described in *note
+     Aliases::.
+
+'bind'
+          bind [-m KEYMAP] [-lpsvPSVX]
+          bind [-m KEYMAP] [-q FUNCTION] [-u FUNCTION] [-r KEYSEQ]
+          bind [-m KEYMAP] -f FILENAME
+          bind [-m KEYMAP] -x KEYSEQ:SHELL-COMMAND
+          bind [-m KEYMAP] KEYSEQ:FUNCTION-NAME
+          bind [-m KEYMAP] KEYSEQ:READLINE-COMMAND
+
+     Display current Readline (*note Command Line Editing::) key and
+     function bindings, bind a key sequence to a Readline function or
+     macro, or set a Readline variable.  Each non-option argument is a
+     command as it would appear in a Readline initialization file (*note
+     Readline Init File::), but each binding or command must be passed
+     as a separate argument; e.g., '"\C-x\C-r":re-read-init-file'.
+
+     Options, if supplied, have the following meanings:
+
+     '-m KEYMAP'
+          Use KEYMAP as the keymap to be affected by the subsequent
+          bindings.  Acceptable KEYMAP names are 'emacs',
+          'emacs-standard', 'emacs-meta', 'emacs-ctlx', 'vi', 'vi-move',
+          'vi-command', and 'vi-insert'.  'vi' is equivalent to
+          'vi-command' ('vi-move' is also a synonym); 'emacs' is
+          equivalent to 'emacs-standard'.
+
+     '-l'
+          List the names of all Readline functions.
+
+     '-p'
+          Display Readline function names and bindings in such a way
+          that they can be used as input or in a Readline initialization
+          file.
+
+     '-P'
+          List current Readline function names and bindings.
+
+     '-v'
+          Display Readline variable names and values in such a way that
+          they can be used as input or in a Readline initialization
+          file.
+
+     '-V'
+          List current Readline variable names and values.
+
+     '-s'
+          Display Readline key sequences bound to macros and the strings
+          they output in such a way that they can be used as input or in
+          a Readline initialization file.
+
+     '-S'
+          Display Readline key sequences bound to macros and the strings
+          they output.
+
+     '-f FILENAME'
+          Read key bindings from FILENAME.
+
+     '-q FUNCTION'
+          Query about which keys invoke the named FUNCTION.
+
+     '-u FUNCTION'
+          Unbind all keys bound to the named FUNCTION.
+
+     '-r KEYSEQ'
+          Remove any current binding for KEYSEQ.
+
+     '-x KEYSEQ:SHELL-COMMAND'
+          Cause SHELL-COMMAND to be executed whenever KEYSEQ is entered.
+          When SHELL-COMMAND is executed, the shell sets the
+          'READLINE_LINE' variable to the contents of the Readline line
+          buffer and the 'READLINE_POINT' and 'READLINE_MARK' variables
+          to the current location of the insertion point and the saved
+          insertion point (the MARK), respectively.  If the executed
+          command changes the value of any of 'READLINE_LINE',
+          'READLINE_POINT', or 'READLINE_MARK', those new values will be
+          reflected in the editing state.
+
+     '-X'
+          List all key sequences bound to shell commands and the
+          associated commands in a format that can be reused as input.
+
+     The return status is zero unless an invalid option is supplied or
+     an error occurs.
+
+'builtin'
+          builtin [SHELL-BUILTIN [ARGS]]
+
+     Run a shell builtin, passing it ARGS, and return its exit status.
+     This is useful when defining a shell function with the same name as
+     a shell builtin, retaining the functionality of the builtin within
+     the function.  The return status is non-zero if SHELL-BUILTIN is
+     not a shell builtin command.
+
+'caller'
+          caller [EXPR]
+
+     Returns the context of any active subroutine call (a shell function
+     or a script executed with the '.' or 'source' builtins).
+
+     Without EXPR, 'caller' displays the line number and source filename
+     of the current subroutine call.  If a non-negative integer is
+     supplied as EXPR, 'caller' displays the line number, subroutine
+     name, and source file corresponding to that position in the current
+     execution call stack.  This extra information may be used, for
+     example, to print a stack trace.  The current frame is frame 0.
+
+     The return value is 0 unless the shell is not executing a
+     subroutine call or EXPR does not correspond to a valid position in
+     the call stack.
+
+'command'
+          command [-pVv] COMMAND [ARGUMENTS ...]
+
+     Runs COMMAND with ARGUMENTS ignoring any shell function named
+     COMMAND.  Only shell builtin commands or commands found by
+     searching the 'PATH' are executed.  If there is a shell function
+     named 'ls', running 'command ls' within the function will execute
+     the external command 'ls' instead of calling the function
+     recursively.  The '-p' option means to use a default value for
+     'PATH' that is guaranteed to find all of the standard utilities.
+     The return status in this case is 127 if COMMAND cannot be found or
+     an error occurred, and the exit status of COMMAND otherwise.
+
+     If either the '-V' or '-v' option is supplied, a description of
+     COMMAND is printed.  The '-v' option causes a single word
+     indicating the command or file name used to invoke COMMAND to be
+     displayed; the '-V' option produces a more verbose description.  In
+     this case, the return status is zero if COMMAND is found, and
+     non-zero if not.
+
+'declare'
+          declare [-aAfFgiIlnrtux] [-p] [NAME[=VALUE] ...]
+
+     Declare variables and give them attributes.  If no NAMEs are given,
+     then display the values of variables instead.
+
+     The '-p' option will display the attributes and values of each
+     NAME.  When '-p' is used with NAME arguments, additional options,
+     other than '-f' and '-F', are ignored.
+
+     When '-p' is supplied without NAME arguments, 'declare' will
+     display the attributes and values of all variables having the
+     attributes specified by the additional options.  If no other
+     options are supplied with '-p', 'declare' will display the
+     attributes and values of all shell variables.  The '-f' option will
+     restrict the display to shell functions.
+
+     The '-F' option inhibits the display of function definitions; only
+     the function name and attributes are printed.  If the 'extdebug'
+     shell option is enabled using 'shopt' (*note The Shopt Builtin::),
+     the source file name and line number where each NAME is defined are
+     displayed as well.  '-F' implies '-f'.
+
+     The '-g' option forces variables to be created or modified at the
+     global scope, even when 'declare' is executed in a shell function.
+     It is ignored in all other cases.
+
+     The '-I' option causes local variables to inherit the attributes
+     (except the NAMEREF attribute) and value of any existing variable
+     with the same NAME at a surrounding scope.  If there is no existing
+     variable, the local variable is initially unset.
+
+     The following options can be used to restrict output to variables
+     with the specified attributes or to give variables attributes:
+
+     '-a'
+          Each NAME is an indexed array variable (*note Arrays::).
+
+     '-A'
+          Each NAME is an associative array variable (*note Arrays::).
+
+     '-f'
+          Use function names only.
+
+     '-i'
+          The variable is to be treated as an integer; arithmetic
+          evaluation (*note Shell Arithmetic::) is performed when the
+          variable is assigned a value.
+
+     '-l'
+          When the variable is assigned a value, all upper-case
+          characters are converted to lower-case.  The upper-case
+          attribute is disabled.
+
+     '-n'
+          Give each NAME the NAMEREF attribute, making it a name
+          reference to another variable.  That other variable is defined
+          by the value of NAME.  All references, assignments, and
+          attribute modifications to NAME, except for those using or
+          changing the '-n' attribute itself, are performed on the
+          variable referenced by NAME's value.  The nameref attribute
+          cannot be applied to array variables.
+
+     '-r'
+          Make NAMEs readonly.  These names cannot then be assigned
+          values by subsequent assignment statements or unset.
+
+     '-t'
+          Give each NAME the 'trace' attribute.  Traced functions
+          inherit the 'DEBUG' and 'RETURN' traps from the calling shell.
+          The trace attribute has no special meaning for variables.
+
+     '-u'
+          When the variable is assigned a value, all lower-case
+          characters are converted to upper-case.  The lower-case
+          attribute is disabled.
+
+     '-x'
+          Mark each NAME for export to subsequent commands via the
+          environment.
+
+     Using '+' instead of '-' turns off the attribute instead, with the
+     exceptions that '+a' and '+A' may not be used to destroy array
+     variables and '+r' will not remove the readonly attribute.  When
+     used in a function, 'declare' makes each NAME local, as with the
+     'local' command, unless the '-g' option is used.  If a variable
+     name is followed by =VALUE, the value of the variable is set to
+     VALUE.
+
+     When using '-a' or '-A' and the compound assignment syntax to
+     create array variables, additional attributes do not take effect
+     until subsequent assignments.
+
+     The return status is zero unless an invalid option is encountered,
+     an attempt is made to define a function using '-f foo=bar', an
+     attempt is made to assign a value to a readonly variable, an
+     attempt is made to assign a value to an array variable without
+     using the compound assignment syntax (*note Arrays::), one of the
+     NAMES is not a valid shell variable name, an attempt is made to
+     turn off readonly status for a readonly variable, an attempt is
+     made to turn off array status for an array variable, or an attempt
+     is made to display a non-existent function with '-f'.
+
+'echo'
+          echo [-neE] [ARG ...]
+
+     Output the ARGs, separated by spaces, terminated with a newline.
+     The return status is 0 unless a write error occurs.  If '-n' is
+     specified, the trailing newline is suppressed.  If the '-e' option
+     is given, interpretation of the following backslash-escaped
+     characters is enabled.  The '-E' option disables the interpretation
+     of these escape characters, even on systems where they are
+     interpreted by default.  The 'xpg_echo' shell option may be used to
+     dynamically determine whether or not 'echo' expands these escape
+     characters by default.  'echo' does not interpret '--' to mean the
+     end of options.
+
+     'echo' interprets the following escape sequences:
+     '\a'
+          alert (bell)
+     '\b'
+          backspace
+     '\c'
+          suppress further output
+     '\e'
+     '\E'
+          escape
+     '\f'
+          form feed
+     '\n'
+          new line
+     '\r'
+          carriage return
+     '\t'
+          horizontal tab
+     '\v'
+          vertical tab
+     '\\'
+          backslash
+     '\0NNN'
+          the eight-bit character whose value is the octal value NNN
+          (zero to three octal digits)
+     '\xHH'
+          the eight-bit character whose value is the hexadecimal value
+          HH (one or two hex digits)
+     '\uHHHH'
+          the Unicode (ISO/IEC 10646) character whose value is the
+          hexadecimal value HHHH (one to four hex digits)
+     '\UHHHHHHHH'
+          the Unicode (ISO/IEC 10646) character whose value is the
+          hexadecimal value HHHHHHHH (one to eight hex digits)
+
+'enable'
+          enable [-a] [-dnps] [-f FILENAME] [NAME ...]
+
+     Enable and disable builtin shell commands.  Disabling a builtin
+     allows a disk command which has the same name as a shell builtin to
+     be executed without specifying a full pathname, even though the
+     shell normally searches for builtins before disk commands.  If '-n'
+     is used, the NAMEs become disabled.  Otherwise NAMEs are enabled.
+     For example, to use the 'test' binary found via '$PATH' instead of
+     the shell builtin version, type 'enable -n test'.
+
+     If the '-p' option is supplied, or no NAME arguments appear, a list
+     of shell builtins is printed.  With no other arguments, the list
+     consists of all enabled shell builtins.  The '-a' option means to
+     list each builtin with an indication of whether or not it is
+     enabled.
+
+     The '-f' option means to load the new builtin command NAME from
+     shared object FILENAME, on systems that support dynamic loading.
+     The '-d' option will delete a builtin loaded with '-f'.
+
+     If there are no options, a list of the shell builtins is displayed.
+     The '-s' option restricts 'enable' to the POSIX special builtins.
+     If '-s' is used with '-f', the new builtin becomes a special
+     builtin (*note Special Builtins::).
+
+     The return status is zero unless a NAME is not a shell builtin or
+     there is an error loading a new builtin from a shared object.
+
+'help'
+          help [-dms] [PATTERN]
+
+     Display helpful information about builtin commands.  If PATTERN is
+     specified, 'help' gives detailed help on all commands matching
+     PATTERN, otherwise a list of the builtins is printed.
+
+     Options, if supplied, have the following meanings:
+
+     '-d'
+          Display a short description of each PATTERN
+     '-m'
+          Display the description of each PATTERN in a manpage-like
+          format
+     '-s'
+          Display only a short usage synopsis for each PATTERN
+
+     The return status is zero unless no command matches PATTERN.
+
+'let'
+          let EXPRESSION [EXPRESSION ...]
+
+     The 'let' builtin allows arithmetic to be performed on shell
+     variables.  Each EXPRESSION is evaluated according to the rules
+     given below in *note Shell Arithmetic::.  If the last EXPRESSION
+     evaluates to 0, 'let' returns 1; otherwise 0 is returned.
+
+'local'
+          local [OPTION] NAME[=VALUE] ...
+
+     For each argument, a local variable named NAME is created, and
+     assigned VALUE.  The OPTION can be any of the options accepted by
+     'declare'.  'local' can only be used within a function; it makes
+     the variable NAME have a visible scope restricted to that function
+     and its children.  If NAME is '-', the set of shell options is made
+     local to the function in which 'local' is invoked: shell options
+     changed using the 'set' builtin inside the function are restored to
+     their original values when the function returns.  The restore is
+     effected as if a series of 'set' commands were executed to restore
+     the values that were in place before the function.  The return
+     status is zero unless 'local' is used outside a function, an
+     invalid NAME is supplied, or NAME is a readonly variable.
+
+'logout'
+          logout [N]
+
+     Exit a login shell, returning a status of N to the shell's parent.
+
+'mapfile'
+          mapfile [-d DELIM] [-n COUNT] [-O ORIGIN] [-s COUNT]
+              [-t] [-u FD] [-C CALLBACK] [-c QUANTUM] [ARRAY]
+
+     Read lines from the standard input into the indexed array variable
+     ARRAY, or from file descriptor FD if the '-u' option is supplied.
+     The variable 'MAPFILE' is the default ARRAY.  Options, if supplied,
+     have the following meanings:
+
+     '-d'
+          The first character of DELIM is used to terminate each input
+          line, rather than newline.  If DELIM is the empty string,
+          'mapfile' will terminate a line when it reads a NUL character.
+     '-n'
+          Copy at most COUNT lines.  If COUNT is 0, all lines are
+          copied.
+     '-O'
+          Begin assigning to ARRAY at index ORIGIN.  The default index
+          is 0.
+     '-s'
+          Discard the first COUNT lines read.
+     '-t'
+          Remove a trailing DELIM (default newline) from each line read.
+     '-u'
+          Read lines from file descriptor FD instead of the standard
+          input.
+     '-C'
+          Evaluate CALLBACK each time QUANTUM lines are read.  The '-c'
+          option specifies QUANTUM.
+     '-c'
+          Specify the number of lines read between each call to
+          CALLBACK.
+
+     If '-C' is specified without '-c', the default quantum is 5000.
+     When CALLBACK is evaluated, it is supplied the index of the next
+     array element to be assigned and the line to be assigned to that
+     element as additional arguments.  CALLBACK is evaluated after the
+     line is read but before the array element is assigned.
+
+     If not supplied with an explicit origin, 'mapfile' will clear ARRAY
+     before assigning to it.
+
+     'mapfile' returns successfully unless an invalid option or option
+     argument is supplied, ARRAY is invalid or unassignable, or ARRAY is
+     not an indexed array.
+
+'printf'
+          printf [-v VAR] FORMAT [ARGUMENTS]
+
+     Write the formatted ARGUMENTS to the standard output under the
+     control of the FORMAT.  The '-v' option causes the output to be
+     assigned to the variable VAR rather than being printed to the
+     standard output.
+
+     The FORMAT is a character string which contains three types of
+     objects: plain characters, which are simply copied to standard
+     output, character escape sequences, which are converted and copied
+     to the standard output, and format specifications, each of which
+     causes printing of the next successive ARGUMENT.  In addition to
+     the standard 'printf(1)' formats, 'printf' interprets the following
+     extensions:
+
+     '%b'
+          Causes 'printf' to expand backslash escape sequences in the
+          corresponding ARGUMENT in the same way as 'echo -e' (*note
+          Bash Builtins::).
+     '%q'
+          Causes 'printf' to output the corresponding ARGUMENT in a
+          format that can be reused as shell input.
+     '%(DATEFMT)T'
+          Causes 'printf' to output the date-time string resulting from
+          using DATEFMT as a format string for 'strftime'(3).  The
+          corresponding ARGUMENT is an integer representing the number
+          of seconds since the epoch.  Two special argument values may
+          be used: -1 represents the current time, and -2 represents the
+          time the shell was invoked.  If no argument is specified,
+          conversion behaves as if -1 had been given.  This is an
+          exception to the usual 'printf' behavior.
+
+     The %b, %q, and %T directives all use the field width and precision
+     arguments from the format specification and write that many bytes
+     from (or use that wide a field for) the expanded argument, which
+     usually contains more characters than the original.
+
+     Arguments to non-string format specifiers are treated as C language
+     constants, except that a leading plus or minus sign is allowed, and
+     if the leading character is a single or double quote, the value is
+     the ASCII value of the following character.
+
+     The FORMAT is reused as necessary to consume all of the ARGUMENTS.
+     If the FORMAT requires more ARGUMENTS than are supplied, the extra
+     format specifications behave as if a zero value or null string, as
+     appropriate, had been supplied.  The return value is zero on
+     success, non-zero on failure.
+
+'read'
+          read [-ers] [-a ANAME] [-d DELIM] [-i TEXT] [-n NCHARS]
+              [-N NCHARS] [-p PROMPT] [-t TIMEOUT] [-u FD] [NAME ...]
+
+     One line is read from the standard input, or from the file
+     descriptor FD supplied as an argument to the '-u' option, split
+     into words as described above in *note Word Splitting::, and the
+     first word is assigned to the first NAME, the second word to the
+     second NAME, and so on.  If there are more words than names, the
+     remaining words and their intervening delimiters are assigned to
+     the last NAME.  If there are fewer words read from the input stream
+     than names, the remaining names are assigned empty values.  The
+     characters in the value of the 'IFS' variable are used to split the
+     line into words using the same rules the shell uses for expansion
+     (described above in *note Word Splitting::).  The backslash
+     character '\' may be used to remove any special meaning for the
+     next character read and for line continuation.
+
+     Options, if supplied, have the following meanings:
+
+     '-a ANAME'
+          The words are assigned to sequential indices of the array
+          variable ANAME, starting at 0.  All elements are removed from
+          ANAME before the assignment.  Other NAME arguments are
+          ignored.
+
+     '-d DELIM'
+          The first character of DELIM is used to terminate the input
+          line, rather than newline.  If DELIM is the empty string,
+          'read' will terminate a line when it reads a NUL character.
+
+     '-e'
+          Readline (*note Command Line Editing::) is used to obtain the
+          line.  Readline uses the current (or default, if line editing
+          was not previously active) editing settings, but uses
+          Readline's default filename completion.
+
+     '-i TEXT'
+          If Readline is being used to read the line, TEXT is placed
+          into the editing buffer before editing begins.
+
+     '-n NCHARS'
+          'read' returns after reading NCHARS characters rather than
+          waiting for a complete line of input, but honors a delimiter
+          if fewer than NCHARS characters are read before the delimiter.
+
+     '-N NCHARS'
+          'read' returns after reading exactly NCHARS characters rather
+          than waiting for a complete line of input, unless EOF is
+          encountered or 'read' times out.  Delimiter characters
+          encountered in the input are not treated specially and do not
+          cause 'read' to return until NCHARS characters are read.  The
+          result is not split on the characters in 'IFS'; the intent is
+          that the variable is assigned exactly the characters read
+          (with the exception of backslash; see the '-r' option below).
+
+     '-p PROMPT'
+          Display PROMPT, without a trailing newline, before attempting
+          to read any input.  The prompt is displayed only if input is
+          coming from a terminal.
+
+     '-r'
+          If this option is given, backslash does not act as an escape
+          character.  The backslash is considered to be part of the
+          line.  In particular, a backslash-newline pair may not then be
+          used as a line continuation.
+
+     '-s'
+          Silent mode.  If input is coming from a terminal, characters
+          are not echoed.
+
+     '-t TIMEOUT'
+          Cause 'read' to time out and return failure if a complete line
+          of input (or a specified number of characters) is not read
+          within TIMEOUT seconds.  TIMEOUT may be a decimal number with
+          a fractional portion following the decimal point.  This option
+          is only effective if 'read' is reading input from a terminal,
+          pipe, or other special file; it has no effect when reading
+          from regular files.  If 'read' times out, 'read' saves any
+          partial input read into the specified variable NAME.  If
+          TIMEOUT is 0, 'read' returns immediately, without trying to
+          read any data.  The exit status is 0 if input is available on
+          the specified file descriptor, non-zero otherwise.  The exit
+          status is greater than 128 if the timeout is exceeded.
+
+     '-u FD'
+          Read input from file descriptor FD.
+
+     If no NAMEs are supplied, the line read, without the ending
+     delimiter but otherwise unmodified, is assigned to the variable
+     'REPLY'.  The exit status is zero, unless end-of-file is
+     encountered, 'read' times out (in which case the status is greater
+     than 128), a variable assignment error (such as assigning to a
+     readonly variable) occurs, or an invalid file descriptor is
+     supplied as the argument to '-u'.
+
+'readarray'
+          readarray [-d DELIM] [-n COUNT] [-O ORIGIN] [-s COUNT]
+              [-t] [-u FD] [-C CALLBACK] [-c QUANTUM] [ARRAY]
+
+     Read lines from the standard input into the indexed array variable
+     ARRAY, or from file descriptor FD if the '-u' option is supplied.
+
+     A synonym for 'mapfile'.
+
+'source'
+          source FILENAME
+
+     A synonym for '.' (*note Bourne Shell Builtins::).
+
+'type'
+          type [-afptP] [NAME ...]
+
+     For each NAME, indicate how it would be interpreted if used as a
+     command name.
+
+     If the '-t' option is used, 'type' prints a single word which is
+     one of 'alias', 'function', 'builtin', 'file' or 'keyword', if NAME
+     is an alias, shell function, shell builtin, disk file, or shell
+     reserved word, respectively.  If the NAME is not found, then
+     nothing is printed, and 'type' returns a failure status.
+
+     If the '-p' option is used, 'type' either returns the name of the
+     disk file that would be executed, or nothing if '-t' would not
+     return 'file'.
+
+     The '-P' option forces a path search for each NAME, even if '-t'
+     would not return 'file'.
+
+     If a command is hashed, '-p' and '-P' print the hashed value, which
+     is not necessarily the file that appears first in '$PATH'.
+
+     If the '-a' option is used, 'type' returns all of the places that
+     contain an executable named FILE.  This includes aliases and
+     functions, if and only if the '-p' option is not also used.
+
+     If the '-f' option is used, 'type' does not attempt to find shell
+     functions, as with the 'command' builtin.
+
+     The return status is zero if all of the NAMES are found, non-zero
+     if any are not found.
+
+'typeset'
+          typeset [-afFgrxilnrtux] [-p] [NAME[=VALUE] ...]
+
+     The 'typeset' command is supplied for compatibility with the Korn
+     shell.  It is a synonym for the 'declare' builtin command.
+
+'ulimit'
+          ulimit [-HS] -a
+          ulimit [-HS] [-bcdefiklmnpqrstuvxPRT] [LIMIT]
+
+     'ulimit' provides control over the resources available to processes
+     started by the shell, on systems that allow such control.  If an
+     option is given, it is interpreted as follows:
+
+     '-S'
+          Change and report the soft limit associated with a resource.
+
+     '-H'
+          Change and report the hard limit associated with a resource.
+
+     '-a'
+          All current limits are reported; no limits are set.
+
+     '-b'
+          The maximum socket buffer size.
+
+     '-c'
+          The maximum size of core files created.
+
+     '-d'
+          The maximum size of a process's data segment.
+
+     '-e'
+          The maximum scheduling priority ("nice").
+
+     '-f'
+          The maximum size of files written by the shell and its
+          children.
+
+     '-i'
+          The maximum number of pending signals.
+
+     '-k'
+          The maximum number of kqueues that may be allocated.
+
+     '-l'
+          The maximum size that may be locked into memory.
+
+     '-m'
+          The maximum resident set size (many systems do not honor this
+          limit).
+
+     '-n'
+          The maximum number of open file descriptors (most systems do
+          not allow this value to be set).
+
+     '-p'
+          The pipe buffer size.
+
+     '-q'
+          The maximum number of bytes in POSIX message queues.
+
+     '-r'
+          The maximum real-time scheduling priority.
+
+     '-s'
+          The maximum stack size.
+
+     '-t'
+          The maximum amount of cpu time in seconds.
+
+     '-u'
+          The maximum number of processes available to a single user.
+
+     '-v'
+          The maximum amount of virtual memory available to the shell,
+          and, on some systems, to its children.
+
+     '-x'
+          The maximum number of file locks.
+
+     '-P'
+          The maximum number of pseudoterminals.
+
+     '-R'
+          The maximum time a real-time process can run before blocking,
+          in microseconds.
+
+     '-T'
+          The maximum number of threads.
+
+     If LIMIT is given, and the '-a' option is not used, LIMIT is the
+     new value of the specified resource.  The special LIMIT values
+     'hard', 'soft', and 'unlimited' stand for the current hard limit,
+     the current soft limit, and no limit, respectively.  A hard limit
+     cannot be increased by a non-root user once it is set; a soft limit
+     may be increased up to the value of the hard limit.  Otherwise, the
+     current value of the soft limit for the specified resource is
+     printed, unless the '-H' option is supplied.  When more than one
+     resource is specified, the limit name and unit, if appropriate, are
+     printed before the value.  When setting new limits, if neither '-H'
+     nor '-S' is supplied, both the hard and soft limits are set.  If no
+     option is given, then '-f' is assumed.  Values are in 1024-byte
+     increments, except for '-t', which is in seconds; '-R', which is in
+     microseconds; '-p', which is in units of 512-byte blocks; '-P',
+     '-T', '-b', '-k', '-n' and '-u', which are unscaled values; and,
+     when in POSIX Mode (*note Bash POSIX Mode::), '-c' and '-f', which
+     are in 512-byte increments.
+
+     The return status is zero unless an invalid option or argument is
+     supplied, or an error occurs while setting a new limit.
+
+'unalias'
+          unalias [-a] [NAME ... ]
+
+     Remove each NAME from the list of aliases.  If '-a' is supplied,
+     all aliases are removed.  Aliases are described in *note Aliases::.
+
+
+File: bash.info,  Node: Modifying Shell Behavior,  Next: Special Builtins,  Prev: Bash Builtins,  Up: Shell Builtin Commands
+
+4.3 Modifying Shell Behavior
+============================
+
+* Menu:
+
+* The Set Builtin::		Change the values of shell attributes and
+				positional parameters.
+* The Shopt Builtin::		Modify shell optional behavior.
+
+
+File: bash.info,  Node: The Set Builtin,  Next: The Shopt Builtin,  Up: Modifying Shell Behavior
+
+4.3.1 The Set Builtin
+---------------------
+
+This builtin is so complicated that it deserves its own section.  'set'
+allows you to change the values of shell options and set the positional
+parameters, or to display the names and values of shell variables.
+
+'set'
+          set [--abefhkmnptuvxBCEHPT] [-o OPTION-NAME] [ARGUMENT ...]
+          set [+abefhkmnptuvxBCEHPT] [+o OPTION-NAME] [ARGUMENT ...]
+
+     If no options or arguments are supplied, 'set' displays the names
+     and values of all shell variables and functions, sorted according
+     to the current locale, in a format that may be reused as input for
+     setting or resetting the currently-set variables.  Read-only
+     variables cannot be reset.  In POSIX mode, only shell variables are
+     listed.
+
+     When options are supplied, they set or unset shell attributes.
+     Options, if specified, have the following meanings:
+
+     '-a'
+          Each variable or function that is created or modified is given
+          the export attribute and marked for export to the environment
+          of subsequent commands.
+
+     '-b'
+          Cause the status of terminated background jobs to be reported
+          immediately, rather than before printing the next primary
+          prompt.
+
+     '-e'
+          Exit immediately if a pipeline (*note Pipelines::), which may
+          consist of a single simple command (*note Simple Commands::),
+          a list (*note Lists::), or a compound command (*note Compound
+          Commands::) returns a non-zero status.  The shell does not
+          exit if the command that fails is part of the command list
+          immediately following a 'while' or 'until' keyword, part of
+          the test in an 'if' statement, part of any command executed in
+          a '&&' or '||' list except the command following the final
+          '&&' or '||', any command in a pipeline but the last, or if
+          the command's return status is being inverted with '!'.  If a
+          compound command other than a subshell returns a non-zero
+          status because a command failed while '-e' was being ignored,
+          the shell does not exit.  A trap on 'ERR', if set, is executed
+          before the shell exits.
+
+          This option applies to the shell environment and each subshell
+          environment separately (*note Command Execution
+          Environment::), and may cause subshells to exit before
+          executing all the commands in the subshell.
+
+          If a compound command or shell function executes in a context
+          where '-e' is being ignored, none of the commands executed
+          within the compound command or function body will be affected
+          by the '-e' setting, even if '-e' is set and a command returns
+          a failure status.  If a compound command or shell function
+          sets '-e' while executing in a context where '-e' is ignored,
+          that setting will not have any effect until the compound
+          command or the command containing the function call completes.
+
+     '-f'
+          Disable filename expansion (globbing).
+
+     '-h'
+          Locate and remember (hash) commands as they are looked up for
+          execution.  This option is enabled by default.
+
+     '-k'
+          All arguments in the form of assignment statements are placed
+          in the environment for a command, not just those that precede
+          the command name.
+
+     '-m'
+          Job control is enabled (*note Job Control::).  All processes
+          run in a separate process group.  When a background job
+          completes, the shell prints a line containing its exit status.
+
+     '-n'
+          Read commands but do not execute them.  This may be used to
+          check a script for syntax errors.  This option is ignored by
+          interactive shells.
+
+     '-o OPTION-NAME'
+
+          Set the option corresponding to OPTION-NAME:
+
+          'allexport'
+               Same as '-a'.
+
+          'braceexpand'
+               Same as '-B'.
+
+          'emacs'
+               Use an 'emacs'-style line editing interface (*note
+               Command Line Editing::).  This also affects the editing
+               interface used for 'read -e'.
+
+          'errexit'
+               Same as '-e'.
+
+          'errtrace'
+               Same as '-E'.
+
+          'functrace'
+               Same as '-T'.
+
+          'hashall'
+               Same as '-h'.
+
+          'histexpand'
+               Same as '-H'.
+
+          'history'
+               Enable command history, as described in *note Bash
+               History Facilities::.  This option is on by default in
+               interactive shells.
+
+          'ignoreeof'
+               An interactive shell will not exit upon reading EOF.
+
+          'keyword'
+               Same as '-k'.
+
+          'monitor'
+               Same as '-m'.
+
+          'noclobber'
+               Same as '-C'.
+
+          'noexec'
+               Same as '-n'.
+
+          'noglob'
+               Same as '-f'.
+
+          'nolog'
+               Currently ignored.
+
+          'notify'
+               Same as '-b'.
+
+          'nounset'
+               Same as '-u'.
+
+          'onecmd'
+               Same as '-t'.
+
+          'physical'
+               Same as '-P'.
+
+          'pipefail'
+               If set, the return value of a pipeline is the value of
+               the last (rightmost) command to exit with a non-zero
+               status, or zero if all commands in the pipeline exit
+               successfully.  This option is disabled by default.
+
+          'posix'
+               Change the behavior of Bash where the default operation
+               differs from the POSIX standard to match the standard
+               (*note Bash POSIX Mode::).  This is intended to make Bash
+               behave as a strict superset of that standard.
+
+          'privileged'
+               Same as '-p'.
+
+          'verbose'
+               Same as '-v'.
+
+          'vi'
+               Use a 'vi'-style line editing interface.  This also
+               affects the editing interface used for 'read -e'.
+
+          'xtrace'
+               Same as '-x'.
+
+     '-p'
+          Turn on privileged mode.  In this mode, the '$BASH_ENV' and
+          '$ENV' files are not processed, shell functions are not
+          inherited from the environment, and the 'SHELLOPTS',
+          'BASHOPTS', 'CDPATH' and 'GLOBIGNORE' variables, if they
+          appear in the environment, are ignored.  If the shell is
+          started with the effective user (group) id not equal to the
+          real user (group) id, and the '-p' option is not supplied,
+          these actions are taken and the effective user id is set to
+          the real user id.  If the '-p' option is supplied at startup,
+          the effective user id is not reset.  Turning this option off
+          causes the effective user and group ids to be set to the real
+          user and group ids.
+
+     '-t'
+          Exit after reading and executing one command.
+
+     '-u'
+          Treat unset variables and parameters other than the special
+          parameters '@' or '*' as an error when performing parameter
+          expansion.  An error message will be written to the standard
+          error, and a non-interactive shell will exit.
+
+     '-v'
+          Print shell input lines as they are read.
+
+     '-x'
+          Print a trace of simple commands, 'for' commands, 'case'
+          commands, 'select' commands, and arithmetic 'for' commands and
+          their arguments or associated word lists after they are
+          expanded and before they are executed.  The value of the 'PS4'
+          variable is expanded and the resultant value is printed before
+          the command and its expanded arguments.
+
+     '-B'
+          The shell will perform brace expansion (*note Brace
+          Expansion::).  This option is on by default.
+
+     '-C'
+          Prevent output redirection using '>', '>&', and '<>' from
+          overwriting existing files.
+
+     '-E'
+          If set, any trap on 'ERR' is inherited by shell functions,
+          command substitutions, and commands executed in a subshell
+          environment.  The 'ERR' trap is normally not inherited in such
+          cases.
+
+     '-H'
+          Enable '!' style history substitution (*note History
+          Interaction::).  This option is on by default for interactive
+          shells.
+
+     '-P'
+          If set, do not resolve symbolic links when performing commands
+          such as 'cd' which change the current directory.  The physical
+          directory is used instead.  By default, Bash follows the
+          logical chain of directories when performing commands which
+          change the current directory.
+
+          For example, if '/usr/sys' is a symbolic link to
+          '/usr/local/sys' then:
+               $ cd /usr/sys; echo $PWD
+               /usr/sys
+               $ cd ..; pwd
+               /usr
+
+          If 'set -P' is on, then:
+               $ cd /usr/sys; echo $PWD
+               /usr/local/sys
+               $ cd ..; pwd
+               /usr/local
+
+     '-T'
+          If set, any trap on 'DEBUG' and 'RETURN' are inherited by
+          shell functions, command substitutions, and commands executed
+          in a subshell environment.  The 'DEBUG' and 'RETURN' traps are
+          normally not inherited in such cases.
+
+     '--'
+          If no arguments follow this option, then the positional
+          parameters are unset.  Otherwise, the positional parameters
+          are set to the ARGUMENTS, even if some of them begin with a
+          '-'.
+
+     '-'
+          Signal the end of options, cause all remaining ARGUMENTS to be
+          assigned to the positional parameters.  The '-x' and '-v'
+          options are turned off.  If there are no arguments, the
+          positional parameters remain unchanged.
+
+     Using '+' rather than '-' causes these options to be turned off.
+     The options can also be used upon invocation of the shell.  The
+     current set of options may be found in '$-'.
+
+     The remaining N ARGUMENTS are positional parameters and are
+     assigned, in order, to '$1', '$2', ... '$N'.  The special parameter
+     '#' is set to N.
+
+     The return status is always zero unless an invalid option is
+     supplied.
+
+
+File: bash.info,  Node: The Shopt Builtin,  Prev: The Set Builtin,  Up: Modifying Shell Behavior
+
+4.3.2 The Shopt Builtin
+-----------------------
+
+This builtin allows you to change additional shell optional behavior.
+
+'shopt'
+          shopt [-pqsu] [-o] [OPTNAME ...]
+
+     Toggle the values of settings controlling optional shell behavior.
+     The settings can be either those listed below, or, if the '-o'
+     option is used, those available with the '-o' option to the 'set'
+     builtin command (*note The Set Builtin::).  With no options, or
+     with the '-p' option, a list of all settable options is displayed,
+     with an indication of whether or not each is set; if OPTNAMES are
+     supplied, the output is restricted to those options.  The '-p'
+     option causes output to be displayed in a form that may be reused
+     as input.  Other options have the following meanings:
+
+     '-s'
+          Enable (set) each OPTNAME.
+
+     '-u'
+          Disable (unset) each OPTNAME.
+
+     '-q'
+          Suppresses normal output; the return status indicates whether
+          the OPTNAME is set or unset.  If multiple OPTNAME arguments
+          are given with '-q', the return status is zero if all OPTNAMES
+          are enabled; non-zero otherwise.
+
+     '-o'
+          Restricts the values of OPTNAME to be those defined for the
+          '-o' option to the 'set' builtin (*note The Set Builtin::).
+
+     If either '-s' or '-u' is used with no OPTNAME arguments, 'shopt'
+     shows only those options which are set or unset, respectively.
+
+     Unless otherwise noted, the 'shopt' options are disabled (off) by
+     default.
+
+     The return status when listing options is zero if all OPTNAMES are
+     enabled, non-zero otherwise.  When setting or unsetting options,
+     the return status is zero unless an OPTNAME is not a valid shell
+     option.
+
+     The list of 'shopt' options is:
+
+     'assoc_expand_once'
+          If set, the shell suppresses multiple evaluation of
+          associative array subscripts during arithmetic expression
+          evaluation, while executing builtins that can perform variable
+          assignments, and while executing builtins that perform array
+          dereferencing.
+
+     'autocd'
+          If set, a command name that is the name of a directory is
+          executed as if it were the argument to the 'cd' command.  This
+          option is only used by interactive shells.
+
+     'cdable_vars'
+          If this is set, an argument to the 'cd' builtin command that
+          is not a directory is assumed to be the name of a variable
+          whose value is the directory to change to.
+
+     'cdspell'
+          If set, minor errors in the spelling of a directory component
+          in a 'cd' command will be corrected.  The errors checked for
+          are transposed characters, a missing character, and a
+          character too many.  If a correction is found, the corrected
+          path is printed, and the command proceeds.  This option is
+          only used by interactive shells.
+
+     'checkhash'
+          If this is set, Bash checks that a command found in the hash
+          table exists before trying to execute it.  If a hashed command
+          no longer exists, a normal path search is performed.
+
+     'checkjobs'
+          If set, Bash lists the status of any stopped and running jobs
+          before exiting an interactive shell.  If any jobs are running,
+          this causes the exit to be deferred until a second exit is
+          attempted without an intervening command (*note Job
+          Control::).  The shell always postpones exiting if any jobs
+          are stopped.
+
+     'checkwinsize'
+          If set, Bash checks the window size after each external
+          (non-builtin) command and, if necessary, updates the values of
+          'LINES' and 'COLUMNS'.  This option is enabled by default.
+
+     'cmdhist'
+          If set, Bash attempts to save all lines of a multiple-line
+          command in the same history entry.  This allows easy
+          re-editing of multi-line commands.  This option is enabled by
+          default, but only has an effect if command history is enabled
+          (*note Bash History Facilities::).
+
+     'compat31'
+     'compat32'
+     'compat40'
+     'compat41'
+     'compat42'
+     'compat43'
+     'compat44'
+          These control aspects of the shell's compatibility mode (*note
+          Shell Compatibility Mode::).
+
+     'complete_fullquote'
+          If set, Bash quotes all shell metacharacters in filenames and
+          directory names when performing completion.  If not set, Bash
+          removes metacharacters such as the dollar sign from the set of
+          characters that will be quoted in completed filenames when
+          these metacharacters appear in shell variable references in
+          words to be completed.  This means that dollar signs in
+          variable names that expand to directories will not be quoted;
+          however, any dollar signs appearing in filenames will not be
+          quoted, either.  This is active only when bash is using
+          backslashes to quote completed filenames.  This variable is
+          set by default, which is the default Bash behavior in versions
+          through 4.2.
+
+     'direxpand'
+          If set, Bash replaces directory names with the results of word
+          expansion when performing filename completion.  This changes
+          the contents of the readline editing buffer.  If not set, Bash
+          attempts to preserve what the user typed.
+
+     'dirspell'
+          If set, Bash attempts spelling correction on directory names
+          during word completion if the directory name initially
+          supplied does not exist.
+
+     'dotglob'
+          If set, Bash includes filenames beginning with a '.'  in the
+          results of filename expansion.  The filenames '.' and '..'
+          must always be matched explicitly, even if 'dotglob' is set.
+
+     'execfail'
+          If this is set, a non-interactive shell will not exit if it
+          cannot execute the file specified as an argument to the 'exec'
+          builtin command.  An interactive shell does not exit if 'exec'
+          fails.
+
+     'expand_aliases'
+          If set, aliases are expanded as described below under Aliases,
+          *note Aliases::.  This option is enabled by default for
+          interactive shells.
+
+     'extdebug'
+          If set at shell invocation, or in a shell startup file,
+          arrange to execute the debugger profile before the shell
+          starts, identical to the '--debugger' option.  If set after
+          invocation, behavior intended for use by debuggers is enabled:
+
+            1. The '-F' option to the 'declare' builtin (*note Bash
+               Builtins::) displays the source file name and line number
+               corresponding to each function name supplied as an
+               argument.
+
+            2. If the command run by the 'DEBUG' trap returns a non-zero
+               value, the next command is skipped and not executed.
+
+            3. If the command run by the 'DEBUG' trap returns a value of
+               2, and the shell is executing in a subroutine (a shell
+               function or a shell script executed by the '.' or
+               'source' builtins), the shell simulates a call to
+               'return'.
+
+            4. 'BASH_ARGC' and 'BASH_ARGV' are updated as described in
+               their descriptions (*note Bash Variables::).
+
+            5. Function tracing is enabled: command substitution, shell
+               functions, and subshells invoked with '( COMMAND )'
+               inherit the 'DEBUG' and 'RETURN' traps.
+
+            6. Error tracing is enabled: command substitution, shell
+               functions, and subshells invoked with '( COMMAND )'
+               inherit the 'ERR' trap.
+
+     'extglob'
+          If set, the extended pattern matching features described above
+          (*note Pattern Matching::) are enabled.
+
+     'extquote'
+          If set, '$'STRING'' and '$"STRING"' quoting is performed
+          within '${PARAMETER}' expansions enclosed in double quotes.
+          This option is enabled by default.
+
+     'failglob'
+          If set, patterns which fail to match filenames during filename
+          expansion result in an expansion error.
+
+     'force_fignore'
+          If set, the suffixes specified by the 'FIGNORE' shell variable
+          cause words to be ignored when performing word completion even
+          if the ignored words are the only possible completions.  *Note
+          Bash Variables::, for a description of 'FIGNORE'.  This option
+          is enabled by default.
+
+     'globasciiranges'
+          If set, range expressions used in pattern matching bracket
+          expressions (*note Pattern Matching::) behave as if in the
+          traditional C locale when performing comparisons.  That is,
+          the current locale's collating sequence is not taken into
+          account, so 'b' will not collate between 'A' and 'B', and
+          upper-case and lower-case ASCII characters will collate
+          together.
+
+     'globstar'
+          If set, the pattern '**' used in a filename expansion context
+          will match all files and zero or more directories and
+          subdirectories.  If the pattern is followed by a '/', only
+          directories and subdirectories match.
+
+     'gnu_errfmt'
+          If set, shell error messages are written in the standard GNU
+          error message format.
+
+     'histappend'
+          If set, the history list is appended to the file named by the
+          value of the 'HISTFILE' variable when the shell exits, rather
+          than overwriting the file.
+
+     'histreedit'
+          If set, and Readline is being used, a user is given the
+          opportunity to re-edit a failed history substitution.
+
+     'histverify'
+          If set, and Readline is being used, the results of history
+          substitution are not immediately passed to the shell parser.
+          Instead, the resulting line is loaded into the Readline
+          editing buffer, allowing further modification.
+
+     'hostcomplete'
+          If set, and Readline is being used, Bash will attempt to
+          perform hostname completion when a word containing a '@' is
+          being completed (*note Commands For Completion::).  This
+          option is enabled by default.
+
+     'huponexit'
+          If set, Bash will send 'SIGHUP' to all jobs when an
+          interactive login shell exits (*note Signals::).
+
+     'inherit_errexit'
+          If set, command substitution inherits the value of the
+          'errexit' option, instead of unsetting it in the subshell
+          environment.  This option is enabled when POSIX mode is
+          enabled.
+
+     'interactive_comments'
+          Allow a word beginning with '#' to cause that word and all
+          remaining characters on that line to be ignored in an
+          interactive shell.  This option is enabled by default.
+
+     'lastpipe'
+          If set, and job control is not active, the shell runs the last
+          command of a pipeline not executed in the background in the
+          current shell environment.
+
+     'lithist'
+          If enabled, and the 'cmdhist' option is enabled, multi-line
+          commands are saved to the history with embedded newlines
+          rather than using semicolon separators where possible.
+
+     'localvar_inherit'
+          If set, local variables inherit the value and attributes of a
+          variable of the same name that exists at a previous scope
+          before any new value is assigned.  The NAMEREF attribute is
+          not inherited.
+
+     'localvar_unset'
+          If set, calling 'unset' on local variables in previous
+          function scopes marks them so subsequent lookups find them
+          unset until that function returns.  This is identical to the
+          behavior of unsetting local variables at the current function
+          scope.
+
+     'login_shell'
+          The shell sets this option if it is started as a login shell
+          (*note Invoking Bash::).  The value may not be changed.
+
+     'mailwarn'
+          If set, and a file that Bash is checking for mail has been
+          accessed since the last time it was checked, the message '"The
+          mail in MAILFILE has been read"' is displayed.
+
+     'no_empty_cmd_completion'
+          If set, and Readline is being used, Bash will not attempt to
+          search the 'PATH' for possible completions when completion is
+          attempted on an empty line.
+
+     'nocaseglob'
+          If set, Bash matches filenames in a case-insensitive fashion
+          when performing filename expansion.
+
+     'nocasematch'
+          If set, Bash matches patterns in a case-insensitive fashion
+          when performing matching while executing 'case' or '[['
+          conditional commands, when performing pattern substitution
+          word expansions, or when filtering possible completions as
+          part of programmable completion.
+
+     'nullglob'
+          If set, Bash allows filename patterns which match no files to
+          expand to a null string, rather than themselves.
+
+     'progcomp'
+          If set, the programmable completion facilities (*note
+          Programmable Completion::) are enabled.  This option is
+          enabled by default.
+
+     'progcomp_alias'
+          If set, and programmable completion is enabled, Bash treats a
+          command name that doesn't have any completions as a possible
+          alias and attempts alias expansion.  If it has an alias, Bash
+          attempts programmable completion using the command word
+          resulting from the expanded alias.
+
+     'promptvars'
+          If set, prompt strings undergo parameter expansion, command
+          substitution, arithmetic expansion, and quote removal after
+          being expanded as described below (*note Controlling the
+          Prompt::).  This option is enabled by default.
+
+     'restricted_shell'
+          The shell sets this option if it is started in restricted mode
+          (*note The Restricted Shell::).  The value may not be changed.
+          This is not reset when the startup files are executed,
+          allowing the startup files to discover whether or not a shell
+          is restricted.
+
+     'shift_verbose'
+          If this is set, the 'shift' builtin prints an error message
+          when the shift count exceeds the number of positional
+          parameters.
+
+     'sourcepath'
+          If set, the 'source' builtin uses the value of 'PATH' to find
+          the directory containing the file supplied as an argument.
+          This option is enabled by default.
+
+     'xpg_echo'
+          If set, the 'echo' builtin expands backslash-escape sequences
+          by default.
+
+
+File: bash.info,  Node: Special Builtins,  Prev: Modifying Shell Behavior,  Up: Shell Builtin Commands
+
+4.4 Special Builtins
+====================
+
+For historical reasons, the POSIX standard has classified several
+builtin commands as _special_.  When Bash is executing in POSIX mode,
+the special builtins differ from other builtin commands in three
+respects:
+
+  1. Special builtins are found before shell functions during command
+     lookup.
+
+  2. If a special builtin returns an error status, a non-interactive
+     shell exits.
+
+  3. Assignment statements preceding the command stay in effect in the
+     shell environment after the command completes.
+
+   When Bash is not executing in POSIX mode, these builtins behave no
+differently than the rest of the Bash builtin commands.  The Bash POSIX
+mode is described in *note Bash POSIX Mode::.
+
+   These are the POSIX special builtins:
+     break : . continue eval exec exit export readonly return set
+     shift trap unset
+
+
+File: bash.info,  Node: Shell Variables,  Next: Bash Features,  Prev: Shell Builtin Commands,  Up: Top
+
+5 Shell Variables
+*****************
+
+* Menu:
+
+* Bourne Shell Variables::	Variables which Bash uses in the same way
+				as the Bourne Shell.
+* Bash Variables::		List of variables that exist in Bash.
+
+This chapter describes the shell variables that Bash uses.  Bash
+automatically assigns default values to a number of variables.
+
+
+File: bash.info,  Node: Bourne Shell Variables,  Next: Bash Variables,  Up: Shell Variables
+
+5.1 Bourne Shell Variables
+==========================
+
+Bash uses certain shell variables in the same way as the Bourne shell.
+In some cases, Bash assigns a default value to the variable.
+
+'CDPATH'
+     A colon-separated list of directories used as a search path for the
+     'cd' builtin command.
+
+'HOME'
+     The current user's home directory; the default for the 'cd' builtin
+     command.  The value of this variable is also used by tilde
+     expansion (*note Tilde Expansion::).
+
+'IFS'
+     A list of characters that separate fields; used when the shell
+     splits words as part of expansion.
+
+'MAIL'
+     If this parameter is set to a filename or directory name and the
+     'MAILPATH' variable is not set, Bash informs the user of the
+     arrival of mail in the specified file or Maildir-format directory.
+
+'MAILPATH'
+     A colon-separated list of filenames which the shell periodically
+     checks for new mail.  Each list entry can specify the message that
+     is printed when new mail arrives in the mail file by separating the
+     filename from the message with a '?'.  When used in the text of the
+     message, '$_' expands to the name of the current mail file.
+
+'OPTARG'
+     The value of the last option argument processed by the 'getopts'
+     builtin.
+
+'OPTIND'
+     The index of the last option argument processed by the 'getopts'
+     builtin.
+
+'PATH'
+     A colon-separated list of directories in which the shell looks for
+     commands.  A zero-length (null) directory name in the value of
+     'PATH' indicates the current directory.  A null directory name may
+     appear as two adjacent colons, or as an initial or trailing colon.
+
+'PS1'
+     The primary prompt string.  The default value is '\s-\v\$ '.  *Note
+     Controlling the Prompt::, for the complete list of escape sequences
+     that are expanded before 'PS1' is displayed.
+
+'PS2'
+     The secondary prompt string.  The default value is '> '.  'PS2' is
+     expanded in the same way as 'PS1' before being displayed.
+
+
+File: bash.info,  Node: Bash Variables,  Prev: Bourne Shell Variables,  Up: Shell Variables
+
+5.2 Bash Variables
+==================
+
+These variables are set or used by Bash, but other shells do not
+normally treat them specially.
+
+   A few variables used by Bash are described in different chapters:
+variables for controlling the job control facilities (*note Job Control
+Variables::).
+
+'_'
+     ($_, an underscore.)  At shell startup, set to the pathname used to
+     invoke the shell or shell script being executed as passed in the
+     environment or argument list.  Subsequently, expands to the last
+     argument to the previous simple command executed in the foreground,
+     after expansion.  Also set to the full pathname used to invoke each
+     command executed and placed in the environment exported to that
+     command.  When checking mail, this parameter holds the name of the
+     mail file.
+
+'BASH'
+     The full pathname used to execute the current instance of Bash.
+
+'BASHOPTS'
+     A colon-separated list of enabled shell options.  Each word in the
+     list is a valid argument for the '-s' option to the 'shopt' builtin
+     command (*note The Shopt Builtin::).  The options appearing in
+     'BASHOPTS' are those reported as 'on' by 'shopt'.  If this variable
+     is in the environment when Bash starts up, each shell option in the
+     list will be enabled before reading any startup files.  This
+     variable is readonly.
+
+'BASHPID'
+     Expands to the process ID of the current Bash process.  This
+     differs from '$$' under certain circumstances, such as subshells
+     that do not require Bash to be re-initialized.  Assignments to
+     'BASHPID' have no effect.  If 'BASHPID' is unset, it loses its
+     special properties, even if it is subsequently reset.
+
+'BASH_ALIASES'
+     An associative array variable whose members correspond to the
+     internal list of aliases as maintained by the 'alias' builtin.
+     (*note Bourne Shell Builtins::).  Elements added to this array
+     appear in the alias list; however, unsetting array elements
+     currently does not cause aliases to be removed from the alias list.
+     If 'BASH_ALIASES' is unset, it loses its special properties, even
+     if it is subsequently reset.
+
+'BASH_ARGC'
+     An array variable whose values are the number of parameters in each
+     frame of the current bash execution call stack.  The number of
+     parameters to the current subroutine (shell function or script
+     executed with '.' or 'source') is at the top of the stack.  When a
+     subroutine is executed, the number of parameters passed is pushed
+     onto 'BASH_ARGC'.  The shell sets 'BASH_ARGC' only when in extended
+     debugging mode (see *note The Shopt Builtin:: for a description of
+     the 'extdebug' option to the 'shopt' builtin).  Setting 'extdebug'
+     after the shell has started to execute a script, or referencing
+     this variable when 'extdebug' is not set, may result in
+     inconsistent values.
+
+'BASH_ARGV'
+     An array variable containing all of the parameters in the current
+     bash execution call stack.  The final parameter of the last
+     subroutine call is at the top of the stack; the first parameter of
+     the initial call is at the bottom.  When a subroutine is executed,
+     the parameters supplied are pushed onto 'BASH_ARGV'.  The shell
+     sets 'BASH_ARGV' only when in extended debugging mode (see *note
+     The Shopt Builtin:: for a description of the 'extdebug' option to
+     the 'shopt' builtin).  Setting 'extdebug' after the shell has
+     started to execute a script, or referencing this variable when
+     'extdebug' is not set, may result in inconsistent values.
+
+'BASH_ARGV0'
+     When referenced, this variable expands to the name of the shell or
+     shell script (identical to '$0'; *Note Special Parameters::, for
+     the description of special parameter 0).  Assignment to
+     'BASH_ARGV0' causes the value assigned to also be assigned to '$0'.
+     If 'BASH_ARGV0' is unset, it loses its special properties, even if
+     it is subsequently reset.
+
+'BASH_CMDS'
+     An associative array variable whose members correspond to the
+     internal hash table of commands as maintained by the 'hash' builtin
+     (*note Bourne Shell Builtins::).  Elements added to this array
+     appear in the hash table; however, unsetting array elements
+     currently does not cause command names to be removed from the hash
+     table.  If 'BASH_CMDS' is unset, it loses its special properties,
+     even if it is subsequently reset.
+
+'BASH_COMMAND'
+     The command currently being executed or about to be executed,
+     unless the shell is executing a command as the result of a trap, in
+     which case it is the command executing at the time of the trap.  If
+     'BASH_COMMAND' is unset, it loses its special properties, even if
+     it is subsequently reset.
+
+'BASH_COMPAT'
+     The value is used to set the shell's compatibility level.  *Note
+     Shell Compatibility Mode::, for a description of the various
+     compatibility levels and their effects.  The value may be a decimal
+     number (e.g., 4.2) or an integer (e.g., 42) corresponding to the
+     desired compatibility level.  If 'BASH_COMPAT' is unset or set to
+     the empty string, the compatibility level is set to the default for
+     the current version.  If 'BASH_COMPAT' is set to a value that is
+     not one of the valid compatibility levels, the shell prints an
+     error message and sets the compatibility level to the default for
+     the current version.  The valid values correspond to the
+     compatibility levels described below (*note Shell Compatibility
+     Mode::).  For example, 4.2 and 42 are valid values that correspond
+     to the 'compat42' 'shopt' option and set the compatibility level to
+     42.  The current version is also a valid value.
+
+'BASH_ENV'
+     If this variable is set when Bash is invoked to execute a shell
+     script, its value is expanded and used as the name of a startup
+     file to read before executing the script.  *Note Bash Startup
+     Files::.
+
+'BASH_EXECUTION_STRING'
+     The command argument to the '-c' invocation option.
+
+'BASH_LINENO'
+     An array variable whose members are the line numbers in source
+     files where each corresponding member of FUNCNAME was invoked.
+     '${BASH_LINENO[$i]}' is the line number in the source file
+     ('${BASH_SOURCE[$i+1]}') where '${FUNCNAME[$i]}' was called (or
+     '${BASH_LINENO[$i-1]}' if referenced within another shell
+     function).  Use 'LINENO' to obtain the current line number.
+
+'BASH_LOADABLES_PATH'
+     A colon-separated list of directories in which the shell looks for
+     dynamically loadable builtins specified by the 'enable' command.
+
+'BASH_REMATCH'
+     An array variable whose members are assigned by the '=~' binary
+     operator to the '[[' conditional command (*note Conditional
+     Constructs::).  The element with index 0 is the portion of the
+     string matching the entire regular expression.  The element with
+     index N is the portion of the string matching the Nth parenthesized
+     subexpression.
+
+'BASH_SOURCE'
+     An array variable whose members are the source filenames where the
+     corresponding shell function names in the 'FUNCNAME' array variable
+     are defined.  The shell function '${FUNCNAME[$i]}' is defined in
+     the file '${BASH_SOURCE[$i]}' and called from
+     '${BASH_SOURCE[$i+1]}'
+
+'BASH_SUBSHELL'
+     Incremented by one within each subshell or subshell environment
+     when the shell begins executing in that environment.  The initial
+     value is 0.  If 'BASH_SUBSHELL' is unset, it loses its special
+     properties, even if it is subsequently reset.
+
+'BASH_VERSINFO'
+     A readonly array variable (*note Arrays::) whose members hold
+     version information for this instance of Bash.  The values assigned
+     to the array members are as follows:
+
+     'BASH_VERSINFO[0]'
+          The major version number (the RELEASE).
+
+     'BASH_VERSINFO[1]'
+          The minor version number (the VERSION).
+
+     'BASH_VERSINFO[2]'
+          The patch level.
+
+     'BASH_VERSINFO[3]'
+          The build version.
+
+     'BASH_VERSINFO[4]'
+          The release status (e.g., BETA1).
+
+     'BASH_VERSINFO[5]'
+          The value of 'MACHTYPE'.
+
+'BASH_VERSION'
+     The version number of the current instance of Bash.
+
+'BASH_XTRACEFD'
+     If set to an integer corresponding to a valid file descriptor, Bash
+     will write the trace output generated when 'set -x' is enabled to
+     that file descriptor.  This allows tracing output to be separated
+     from diagnostic and error messages.  The file descriptor is closed
+     when 'BASH_XTRACEFD' is unset or assigned a new value.  Unsetting
+     'BASH_XTRACEFD' or assigning it the empty string causes the trace
+     output to be sent to the standard error.  Note that setting
+     'BASH_XTRACEFD' to 2 (the standard error file descriptor) and then
+     unsetting it will result in the standard error being closed.
+
+'CHILD_MAX'
+     Set the number of exited child status values for the shell to
+     remember.  Bash will not allow this value to be decreased below a
+     POSIX-mandated minimum, and there is a maximum value (currently
+     8192) that this may not exceed.  The minimum value is
+     system-dependent.
+
+'COLUMNS'
+     Used by the 'select' command to determine the terminal width when
+     printing selection lists.  Automatically set if the 'checkwinsize'
+     option is enabled (*note The Shopt Builtin::), or in an interactive
+     shell upon receipt of a 'SIGWINCH'.
+
+'COMP_CWORD'
+     An index into '${COMP_WORDS}' of the word containing the current
+     cursor position.  This variable is available only in shell
+     functions invoked by the programmable completion facilities (*note
+     Programmable Completion::).
+
+'COMP_LINE'
+     The current command line.  This variable is available only in shell
+     functions and external commands invoked by the programmable
+     completion facilities (*note Programmable Completion::).
+
+'COMP_POINT'
+     The index of the current cursor position relative to the beginning
+     of the current command.  If the current cursor position is at the
+     end of the current command, the value of this variable is equal to
+     '${#COMP_LINE}'.  This variable is available only in shell
+     functions and external commands invoked by the programmable
+     completion facilities (*note Programmable Completion::).
+
+'COMP_TYPE'
+     Set to an integer value corresponding to the type of completion
+     attempted that caused a completion function to be called: TAB, for
+     normal completion, '?', for listing completions after successive
+     tabs, '!', for listing alternatives on partial word completion,
+     '@', to list completions if the word is not unmodified, or '%', for
+     menu completion.  This variable is available only in shell
+     functions and external commands invoked by the programmable
+     completion facilities (*note Programmable Completion::).
+
+'COMP_KEY'
+     The key (or final key of a key sequence) used to invoke the current
+     completion function.
+
+'COMP_WORDBREAKS'
+     The set of characters that the Readline library treats as word
+     separators when performing word completion.  If 'COMP_WORDBREAKS'
+     is unset, it loses its special properties, even if it is
+     subsequently reset.
+
+'COMP_WORDS'
+     An array variable consisting of the individual words in the current
+     command line.  The line is split into words as Readline would split
+     it, using 'COMP_WORDBREAKS' as described above.  This variable is
+     available only in shell functions invoked by the programmable
+     completion facilities (*note Programmable Completion::).
+
+'COMPREPLY'
+     An array variable from which Bash reads the possible completions
+     generated by a shell function invoked by the programmable
+     completion facility (*note Programmable Completion::).  Each array
+     element contains one possible completion.
+
+'COPROC'
+     An array variable created to hold the file descriptors for output
+     from and input to an unnamed coprocess (*note Coprocesses::).
+
+'DIRSTACK'
+     An array variable containing the current contents of the directory
+     stack.  Directories appear in the stack in the order they are
+     displayed by the 'dirs' builtin.  Assigning to members of this
+     array variable may be used to modify directories already in the
+     stack, but the 'pushd' and 'popd' builtins must be used to add and
+     remove directories.  Assignment to this variable will not change
+     the current directory.  If 'DIRSTACK' is unset, it loses its
+     special properties, even if it is subsequently reset.
+
+'EMACS'
+     If Bash finds this variable in the environment when the shell
+     starts with value 't', it assumes that the shell is running in an
+     Emacs shell buffer and disables line editing.
+
+'ENV'
+     Expanded and executed similarlty to 'BASH_ENV' (*note Bash Startup
+     Files::) when an interactive shell is invoked in POSIX Mode (*note
+     Bash POSIX Mode::).
+
+'EPOCHREALTIME'
+     Each time this parameter is referenced, it expands to the number of
+     seconds since the Unix Epoch as a floating point value with
+     micro-second granularity (see the documentation for the C library
+     function TIME for the definition of Epoch).  Assignments to
+     'EPOCHREALTIME' are ignored.  If 'EPOCHREALTIME' is unset, it loses
+     its special properties, even if it is subsequently reset.
+
+'EPOCHSECONDS'
+     Each time this parameter is referenced, it expands to the number of
+     seconds since the Unix Epoch (see the documentation for the C
+     library function TIME for the definition of Epoch).  Assignments to
+     'EPOCHSECONDS' are ignored.  If 'EPOCHSECONDS' is unset, it loses
+     its special properties, even if it is subsequently reset.
+
+'EUID'
+     The numeric effective user id of the current user.  This variable
+     is readonly.
+
+'EXECIGNORE'
+     A colon-separated list of shell patterns (*note Pattern Matching::)
+     defining the list of filenames to be ignored by command search
+     using 'PATH'.  Files whose full pathnames match one of these
+     patterns are not considered executable files for the purposes of
+     completion and command execution via 'PATH' lookup.  This does not
+     affect the behavior of the '[', 'test', and '[[' commands.  Full
+     pathnames in the command hash table are not subject to
+     'EXECIGNORE'.  Use this variable to ignore shared library files
+     that have the executable bit set, but are not executable files.
+     The pattern matching honors the setting of the 'extglob' shell
+     option.
+
+'FCEDIT'
+     The editor used as a default by the '-e' option to the 'fc' builtin
+     command.
+
+'FIGNORE'
+     A colon-separated list of suffixes to ignore when performing
+     filename completion.  A filename whose suffix matches one of the
+     entries in 'FIGNORE' is excluded from the list of matched
+     filenames.  A sample value is '.o:~'
+
+'FUNCNAME'
+     An array variable containing the names of all shell functions
+     currently in the execution call stack.  The element with index 0 is
+     the name of any currently-executing shell function.  The
+     bottom-most element (the one with the highest index) is '"main"'.
+     This variable exists only when a shell function is executing.
+     Assignments to 'FUNCNAME' have no effect.  If 'FUNCNAME' is unset,
+     it loses its special properties, even if it is subsequently reset.
+
+     This variable can be used with 'BASH_LINENO' and 'BASH_SOURCE'.
+     Each element of 'FUNCNAME' has corresponding elements in
+     'BASH_LINENO' and 'BASH_SOURCE' to describe the call stack.  For
+     instance, '${FUNCNAME[$i]}' was called from the file
+     '${BASH_SOURCE[$i+1]}' at line number '${BASH_LINENO[$i]}'.  The
+     'caller' builtin displays the current call stack using this
+     information.
+
+'FUNCNEST'
+     If set to a numeric value greater than 0, defines a maximum
+     function nesting level.  Function invocations that exceed this
+     nesting level will cause the current command to abort.
+
+'GLOBIGNORE'
+     A colon-separated list of patterns defining the set of file names
+     to be ignored by filename expansion.  If a file name matched by a
+     filename expansion pattern also matches one of the patterns in
+     'GLOBIGNORE', it is removed from the list of matches.  The pattern
+     matching honors the setting of the 'extglob' shell option.
+
+'GROUPS'
+     An array variable containing the list of groups of which the
+     current user is a member.  Assignments to 'GROUPS' have no effect.
+     If 'GROUPS' is unset, it loses its special properties, even if it
+     is subsequently reset.
+
+'histchars'
+     Up to three characters which control history expansion, quick
+     substitution, and tokenization (*note History Interaction::).  The
+     first character is the HISTORY EXPANSION character, that is, the
+     character which signifies the start of a history expansion,
+     normally '!'.  The second character is the character which
+     signifies 'quick substitution' when seen as the first character on
+     a line, normally '^'.  The optional third character is the
+     character which indicates that the remainder of the line is a
+     comment when found as the first character of a word, usually '#'.
+     The history comment character causes history substitution to be
+     skipped for the remaining words on the line.  It does not
+     necessarily cause the shell parser to treat the rest of the line as
+     a comment.
+
+'HISTCMD'
+     The history number, or index in the history list, of the current
+     command.  Assignments to 'HISTCMD' are ignored.  If 'HISTCMD' is
+     unset, it loses its special properties, even if it is subsequently
+     reset.
+
+'HISTCONTROL'
+     A colon-separated list of values controlling how commands are saved
+     on the history list.  If the list of values includes 'ignorespace',
+     lines which begin with a space character are not saved in the
+     history list.  A value of 'ignoredups' causes lines which match the
+     previous history entry to not be saved.  A value of 'ignoreboth' is
+     shorthand for 'ignorespace' and 'ignoredups'.  A value of
+     'erasedups' causes all previous lines matching the current line to
+     be removed from the history list before that line is saved.  Any
+     value not in the above list is ignored.  If 'HISTCONTROL' is unset,
+     or does not include a valid value, all lines read by the shell
+     parser are saved on the history list, subject to the value of
+     'HISTIGNORE'.  The second and subsequent lines of a multi-line
+     compound command are not tested, and are added to the history
+     regardless of the value of 'HISTCONTROL'.
+
+'HISTFILE'
+     The name of the file to which the command history is saved.  The
+     default value is '~/.bash_history'.
+
+'HISTFILESIZE'
+     The maximum number of lines contained in the history file.  When
+     this variable is assigned a value, the history file is truncated,
+     if necessary, to contain no more than that number of lines by
+     removing the oldest entries.  The history file is also truncated to
+     this size after writing it when a shell exits.  If the value is 0,
+     the history file is truncated to zero size.  Non-numeric values and
+     numeric values less than zero inhibit truncation.  The shell sets
+     the default value to the value of 'HISTSIZE' after reading any
+     startup files.
+
+'HISTIGNORE'
+     A colon-separated list of patterns used to decide which command
+     lines should be saved on the history list.  Each pattern is
+     anchored at the beginning of the line and must match the complete
+     line (no implicit '*' is appended).  Each pattern is tested against
+     the line after the checks specified by 'HISTCONTROL' are applied.
+     In addition to the normal shell pattern matching characters, '&'
+     matches the previous history line.  '&' may be escaped using a
+     backslash; the backslash is removed before attempting a match.  The
+     second and subsequent lines of a multi-line compound command are
+     not tested, and are added to the history regardless of the value of
+     'HISTIGNORE'.  The pattern matching honors the setting of the
+     'extglob' shell option.
+
+     'HISTIGNORE' subsumes the function of 'HISTCONTROL'.  A pattern of
+     '&' is identical to 'ignoredups', and a pattern of '[ ]*' is
+     identical to 'ignorespace'.  Combining these two patterns,
+     separating them with a colon, provides the functionality of
+     'ignoreboth'.
+
+'HISTSIZE'
+     The maximum number of commands to remember on the history list.  If
+     the value is 0, commands are not saved in the history list.
+     Numeric values less than zero result in every command being saved
+     on the history list (there is no limit).  The shell sets the
+     default value to 500 after reading any startup files.
+
+'HISTTIMEFORMAT'
+     If this variable is set and not null, its value is used as a format
+     string for STRFTIME to print the time stamp associated with each
+     history entry displayed by the 'history' builtin.  If this variable
+     is set, time stamps are written to the history file so they may be
+     preserved across shell sessions.  This uses the history comment
+     character to distinguish timestamps from other history lines.
+
+'HOSTFILE'
+     Contains the name of a file in the same format as '/etc/hosts' that
+     should be read when the shell needs to complete a hostname.  The
+     list of possible hostname completions may be changed while the
+     shell is running; the next time hostname completion is attempted
+     after the value is changed, Bash adds the contents of the new file
+     to the existing list.  If 'HOSTFILE' is set, but has no value, or
+     does not name a readable file, Bash attempts to read '/etc/hosts'
+     to obtain the list of possible hostname completions.  When
+     'HOSTFILE' is unset, the hostname list is cleared.
+
+'HOSTNAME'
+     The name of the current host.
+
+'HOSTTYPE'
+     A string describing the machine Bash is running on.
+
+'IGNOREEOF'
+     Controls the action of the shell on receipt of an 'EOF' character
+     as the sole input.  If set, the value denotes the number of
+     consecutive 'EOF' characters that can be read as the first
+     character on an input line before the shell will exit.  If the
+     variable exists but does not have a numeric value, or has no value,
+     then the default is 10.  If the variable does not exist, then 'EOF'
+     signifies the end of input to the shell.  This is only in effect
+     for interactive shells.
+
+'INPUTRC'
+     The name of the Readline initialization file, overriding the
+     default of '~/.inputrc'.
+
+'INSIDE_EMACS'
+     If Bash finds this variable in the environment when the shell
+     starts, it assumes that the shell is running in an Emacs shell
+     buffer and may disable line editing depending on the value of
+     'TERM'.
+
+'LANG'
+     Used to determine the locale category for any category not
+     specifically selected with a variable starting with 'LC_'.
+
+'LC_ALL'
+     This variable overrides the value of 'LANG' and any other 'LC_'
+     variable specifying a locale category.
+
+'LC_COLLATE'
+     This variable determines the collation order used when sorting the
+     results of filename expansion, and determines the behavior of range
+     expressions, equivalence classes, and collating sequences within
+     filename expansion and pattern matching (*note Filename
+     Expansion::).
+
+'LC_CTYPE'
+     This variable determines the interpretation of characters and the
+     behavior of character classes within filename expansion and pattern
+     matching (*note Filename Expansion::).
+
+'LC_MESSAGES'
+     This variable determines the locale used to translate double-quoted
+     strings preceded by a '$' (*note Locale Translation::).
+
+'LC_NUMERIC'
+     This variable determines the locale category used for number
+     formatting.
+
+'LC_TIME'
+     This variable determines the locale category used for data and time
+     formatting.
+
+'LINENO'
+     The line number in the script or shell function currently
+     executing.  If 'LINENO' is unset, it loses its special properties,
+     even if it is subsequently reset.
+
+'LINES'
+     Used by the 'select' command to determine the column length for
+     printing selection lists.  Automatically set if the 'checkwinsize'
+     option is enabled (*note The Shopt Builtin::), or in an interactive
+     shell upon receipt of a 'SIGWINCH'.
+
+'MACHTYPE'
+     A string that fully describes the system type on which Bash is
+     executing, in the standard GNU CPU-COMPANY-SYSTEM format.
+
+'MAILCHECK'
+     How often (in seconds) that the shell should check for mail in the
+     files specified in the 'MAILPATH' or 'MAIL' variables.  The default
+     is 60 seconds.  When it is time to check for mail, the shell does
+     so before displaying the primary prompt.  If this variable is
+     unset, or set to a value that is not a number greater than or equal
+     to zero, the shell disables mail checking.
+
+'MAPFILE'
+     An array variable created to hold the text read by the 'mapfile'
+     builtin when no variable name is supplied.
+
+'OLDPWD'
+     The previous working directory as set by the 'cd' builtin.
+
+'OPTERR'
+     If set to the value 1, Bash displays error messages generated by
+     the 'getopts' builtin command.
+
+'OSTYPE'
+     A string describing the operating system Bash is running on.
+
+'PIPESTATUS'
+     An array variable (*note Arrays::) containing a list of exit status
+     values from the processes in the most-recently-executed foreground
+     pipeline (which may contain only a single command).
+
+'POSIXLY_CORRECT'
+     If this variable is in the environment when Bash starts, the shell
+     enters POSIX mode (*note Bash POSIX Mode::) before reading the
+     startup files, as if the '--posix' invocation option had been
+     supplied.  If it is set while the shell is running, Bash enables
+     POSIX mode, as if the command
+          set -o posix
+     had been executed.  When the shell enters POSIX mode, it sets this
+     variable if it was not already set.
+
+'PPID'
+     The process ID of the shell's parent process.  This variable is
+     readonly.
+
+'PROMPT_COMMAND'
+     If this variable is set, and is an array, the value of each set
+     element is interpreted as a command to execute before printing the
+     primary prompt ('$PS1').  If this is set but not an array variable,
+     its value is used as a command to execute instead.
+
+'PROMPT_DIRTRIM'
+     If set to a number greater than zero, the value is used as the
+     number of trailing directory components to retain when expanding
+     the '\w' and '\W' prompt string escapes (*note Controlling the
+     Prompt::).  Characters removed are replaced with an ellipsis.
+
+'PS0'
+     The value of this parameter is expanded like 'PS1' and displayed by
+     interactive shells after reading a command and before the command
+     is executed.
+
+'PS3'
+     The value of this variable is used as the prompt for the 'select'
+     command.  If this variable is not set, the 'select' command prompts
+     with '#? '
+
+'PS4'
+     The value of this parameter is expanded like PS1 and the expanded
+     value is the prompt printed before the command line is echoed when
+     the '-x' option is set (*note The Set Builtin::).  The first
+     character of the expanded value is replicated multiple times, as
+     necessary, to indicate multiple levels of indirection.  The default
+     is '+ '.
+
+'PWD'
+     The current working directory as set by the 'cd' builtin.
+
+'RANDOM'
+     Each time this parameter is referenced, it expands to a random
+     integer between 0 and 32767.  Assigning a value to this variable
+     seeds the random number generator.  If 'RANDOM' is unset, it loses
+     its special properties, even if it is subsequently reset.
+
+'READLINE_LINE'
+     The contents of the Readline line buffer, for use with 'bind -x'
+     (*note Bash Builtins::).
+
+'READLINE_MARK'
+     The position of the MARK (saved insertion point) in the Readline
+     line buffer, for use with 'bind -x' (*note Bash Builtins::).  The
+     characters between the insertion point and the mark are often
+     called the REGION.
+
+'READLINE_POINT'
+     The position of the insertion point in the Readline line buffer,
+     for use with 'bind -x' (*note Bash Builtins::).
+
+'REPLY'
+     The default variable for the 'read' builtin.
+
+'SECONDS'
+     This variable expands to the number of seconds since the shell was
+     started.  Assignment to this variable resets the count to the value
+     assigned, and the expanded value becomes the value assigned plus
+     the number of seconds since the assignment.  The number of seconds
+     at shell invocation and the current time is always determined by
+     querying the system clock.  If 'SECONDS' is unset, it loses its
+     special properties, even if it is subsequently reset.
+
+'SHELL'
+     This environment variable expands to the full pathname to the
+     shell.  If it is not set when the shell starts, Bash assigns to it
+     the full pathname of the current user's login shell.
+
+'SHELLOPTS'
+     A colon-separated list of enabled shell options.  Each word in the
+     list is a valid argument for the '-o' option to the 'set' builtin
+     command (*note The Set Builtin::).  The options appearing in
+     'SHELLOPTS' are those reported as 'on' by 'set -o'.  If this
+     variable is in the environment when Bash starts up, each shell
+     option in the list will be enabled before reading any startup
+     files.  This variable is readonly.
+
+'SHLVL'
+     Incremented by one each time a new instance of Bash is started.
+     This is intended to be a count of how deeply your Bash shells are
+     nested.
+
+'SRANDOM'
+     This variable expands to a 32-bit pseudo-random number each time it
+     is referenced.  The random number generator is not linear on
+     systems that support '/dev/urandom' or 'arc4random', so each
+     returned number has no relationship to the numbers preceding it.
+     The random number generator cannot be seeded, so assignments to
+     this variable have no effect.  If 'SRANDOM' is unset, it loses its
+     special properties, even if it is subsequently reset.
+
+'TIMEFORMAT'
+     The value of this parameter is used as a format string specifying
+     how the timing information for pipelines prefixed with the 'time'
+     reserved word should be displayed.  The '%' character introduces an
+     escape sequence that is expanded to a time value or other
+     information.  The escape sequences and their meanings are as
+     follows; the braces denote optional portions.
+
+     '%%'
+          A literal '%'.
+
+     '%[P][l]R'
+          The elapsed time in seconds.
+
+     '%[P][l]U'
+          The number of CPU seconds spent in user mode.
+
+     '%[P][l]S'
+          The number of CPU seconds spent in system mode.
+
+     '%P'
+          The CPU percentage, computed as (%U + %S) / %R.
+
+     The optional P is a digit specifying the precision, the number of
+     fractional digits after a decimal point.  A value of 0 causes no
+     decimal point or fraction to be output.  At most three places after
+     the decimal point may be specified; values of P greater than 3 are
+     changed to 3.  If P is not specified, the value 3 is used.
+
+     The optional 'l' specifies a longer format, including minutes, of
+     the form MMmSS.FFs.  The value of P determines whether or not the
+     fraction is included.
+
+     If this variable is not set, Bash acts as if it had the value
+          $'\nreal\t%3lR\nuser\t%3lU\nsys\t%3lS'
+     If the value is null, no timing information is displayed.  A
+     trailing newline is added when the format string is displayed.
+
+'TMOUT'
+     If set to a value greater than zero, 'TMOUT' is treated as the
+     default timeout for the 'read' builtin (*note Bash Builtins::).
+     The 'select' command (*note Conditional Constructs::) terminates if
+     input does not arrive after 'TMOUT' seconds when input is coming
+     from a terminal.
+
+     In an interactive shell, the value is interpreted as the number of
+     seconds to wait for a line of input after issuing the primary
+     prompt.  Bash terminates after waiting for that number of seconds
+     if a complete line of input does not arrive.
+
+'TMPDIR'
+     If set, Bash uses its value as the name of a directory in which
+     Bash creates temporary files for the shell's use.
+
+'UID'
+     The numeric real user id of the current user.  This variable is
+     readonly.
+
+
+File: bash.info,  Node: Bash Features,  Next: Job Control,  Prev: Shell Variables,  Up: Top
+
+6 Bash Features
+***************
+
+This chapter describes features unique to Bash.
+
+* Menu:
+
+* Invoking Bash::		Command line options that you can give
+				to Bash.
+* Bash Startup Files::		When and how Bash executes scripts.
+* Interactive Shells::		What an interactive shell is.
+* Bash Conditional Expressions::	Primitives used in composing expressions for
+				the 'test' builtin.
+* Shell Arithmetic::		Arithmetic on shell variables.
+* Aliases::			Substituting one command for another.
+* Arrays::			Array Variables.
+* The Directory Stack::		History of visited directories.
+* Controlling the Prompt::	Customizing the various prompt strings.
+* The Restricted Shell::	A more controlled mode of shell execution.
+* Bash POSIX Mode::		Making Bash behave more closely to what
+				the POSIX standard specifies.
+* Shell Compatibility Mode::	How Bash supports behavior that was present
+				in earlier versions and has changed.
+
+
+File: bash.info,  Node: Invoking Bash,  Next: Bash Startup Files,  Up: Bash Features
+
+6.1 Invoking Bash
+=================
+
+     bash [long-opt] [-ir] [-abefhkmnptuvxdBCDHP] [-o OPTION]
+         [-O SHOPT_OPTION] [ARGUMENT ...]
+     bash [long-opt] [-abefhkmnptuvxdBCDHP] [-o OPTION]
+         [-O SHOPT_OPTION] -c STRING [ARGUMENT ...]
+     bash [long-opt] -s [-abefhkmnptuvxdBCDHP] [-o OPTION]
+         [-O SHOPT_OPTION] [ARGUMENT ...]
+
+   All of the single-character options used with the 'set' builtin
+(*note The Set Builtin::) can be used as options when the shell is
+invoked.  In addition, there are several multi-character options that
+you can use.  These options must appear on the command line before the
+single-character options to be recognized.
+
+'--debugger'
+     Arrange for the debugger profile to be executed before the shell
+     starts.  Turns on extended debugging mode (see *note The Shopt
+     Builtin:: for a description of the 'extdebug' option to the 'shopt'
+     builtin).
+
+'--dump-po-strings'
+     A list of all double-quoted strings preceded by '$' is printed on
+     the standard output in the GNU 'gettext' PO (portable object) file
+     format.  Equivalent to '-D' except for the output format.
+
+'--dump-strings'
+     Equivalent to '-D'.
+
+'--help'
+     Display a usage message on standard output and exit successfully.
+
+'--init-file FILENAME'
+'--rcfile FILENAME'
+     Execute commands from FILENAME (instead of '~/.bashrc') in an
+     interactive shell.
+
+'--login'
+     Equivalent to '-l'.
+
+'--noediting'
+     Do not use the GNU Readline library (*note Command Line Editing::)
+     to read command lines when the shell is interactive.
+
+'--noprofile'
+     Don't load the system-wide startup file '/etc/profile' or any of
+     the personal initialization files '~/.bash_profile',
+     '~/.bash_login', or '~/.profile' when Bash is invoked as a login
+     shell.
+
+'--norc'
+     Don't read the '~/.bashrc' initialization file in an interactive
+     shell.  This is on by default if the shell is invoked as 'sh'.
+
+'--posix'
+     Change the behavior of Bash where the default operation differs
+     from the POSIX standard to match the standard.  This is intended to
+     make Bash behave as a strict superset of that standard.  *Note Bash
+     POSIX Mode::, for a description of the Bash POSIX mode.
+
+'--restricted'
+     Make the shell a restricted shell (*note The Restricted Shell::).
+
+'--verbose'
+     Equivalent to '-v'.  Print shell input lines as they're read.
+
+'--version'
+     Show version information for this instance of Bash on the standard
+     output and exit successfully.
+
+   There are several single-character options that may be supplied at
+invocation which are not available with the 'set' builtin.
+
+'-c'
+     Read and execute commands from the first non-option argument
+     COMMAND_STRING, then exit.  If there are arguments after the
+     COMMAND_STRING, the first argument is assigned to '$0' and any
+     remaining arguments are assigned to the positional parameters.  The
+     assignment to '$0' sets the name of the shell, which is used in
+     warning and error messages.
+
+'-i'
+     Force the shell to run interactively.  Interactive shells are
+     described in *note Interactive Shells::.
+
+'-l'
+     Make this shell act as if it had been directly invoked by login.
+     When the shell is interactive, this is equivalent to starting a
+     login shell with 'exec -l bash'.  When the shell is not
+     interactive, the login shell startup files will be executed.  'exec
+     bash -l' or 'exec bash --login' will replace the current shell with
+     a Bash login shell.  *Note Bash Startup Files::, for a description
+     of the special behavior of a login shell.
+
+'-r'
+     Make the shell a restricted shell (*note The Restricted Shell::).
+
+'-s'
+     If this option is present, or if no arguments remain after option
+     processing, then commands are read from the standard input.  This
+     option allows the positional parameters to be set when invoking an
+     interactive shell or when reading input through a pipe.
+
+'-D'
+     A list of all double-quoted strings preceded by '$' is printed on
+     the standard output.  These are the strings that are subject to
+     language translation when the current locale is not 'C' or 'POSIX'
+     (*note Locale Translation::).  This implies the '-n' option; no
+     commands will be executed.
+
+'[-+]O [SHOPT_OPTION]'
+     SHOPT_OPTION is one of the shell options accepted by the 'shopt'
+     builtin (*note The Shopt Builtin::).  If SHOPT_OPTION is present,
+     '-O' sets the value of that option; '+O' unsets it.  If
+     SHOPT_OPTION is not supplied, the names and values of the shell
+     options accepted by 'shopt' are printed on the standard output.  If
+     the invocation option is '+O', the output is displayed in a format
+     that may be reused as input.
+
+'--'
+     A '--' signals the end of options and disables further option
+     processing.  Any arguments after the '--' are treated as filenames
+     and arguments.
+
+   A _login_ shell is one whose first character of argument zero is '-',
+or one invoked with the '--login' option.
+
+   An _interactive_ shell is one started without non-option arguments,
+unless '-s' is specified, without specifying the '-c' option, and whose
+input and output are both connected to terminals (as determined by
+'isatty(3)'), or one started with the '-i' option.  *Note Interactive
+Shells::, for more information.
+
+   If arguments remain after option processing, and neither the '-c' nor
+the '-s' option has been supplied, the first argument is assumed to be
+the name of a file containing shell commands (*note Shell Scripts::).
+When Bash is invoked in this fashion, '$0' is set to the name of the
+file, and the positional parameters are set to the remaining arguments.
+Bash reads and executes commands from this file, then exits.  Bash's
+exit status is the exit status of the last command executed in the
+script.  If no commands are executed, the exit status is 0.
+
+
+File: bash.info,  Node: Bash Startup Files,  Next: Interactive Shells,  Prev: Invoking Bash,  Up: Bash Features
+
+6.2 Bash Startup Files
+======================
+
+This section describes how Bash executes its startup files.  If any of
+the files exist but cannot be read, Bash reports an error.  Tildes are
+expanded in filenames as described above under Tilde Expansion (*note
+Tilde Expansion::).
+
+   Interactive shells are described in *note Interactive Shells::.
+
+Invoked as an interactive login shell, or with '--login'
+........................................................
+
+When Bash is invoked as an interactive login shell, or as a
+non-interactive shell with the '--login' option, it first reads and
+executes commands from the file '/etc/profile', if that file exists.
+After reading that file, it looks for '~/.bash_profile',
+'~/.bash_login', and '~/.profile', in that order, and reads and executes
+commands from the first one that exists and is readable.  The
+'--noprofile' option may be used when the shell is started to inhibit
+this behavior.
+
+   When an interactive login shell exits, or a non-interactive login
+shell executes the 'exit' builtin command, Bash reads and executes
+commands from the file '~/.bash_logout', if it exists.
+
+Invoked as an interactive non-login shell
+.........................................
+
+When an interactive shell that is not a login shell is started, Bash
+reads and executes commands from '~/.bashrc', if that file exists.  This
+may be inhibited by using the '--norc' option.  The '--rcfile FILE'
+option will force Bash to read and execute commands from FILE instead of
+'~/.bashrc'.
+
+   So, typically, your '~/.bash_profile' contains the line
+     if [ -f ~/.bashrc ]; then . ~/.bashrc; fi
+after (or before) any login-specific initializations.
+
+Invoked non-interactively
+.........................
+
+When Bash is started non-interactively, to run a shell script, for
+example, it looks for the variable 'BASH_ENV' in the environment,
+expands its value if it appears there, and uses the expanded value as
+the name of a file to read and execute.  Bash behaves as if the
+following command were executed:
+     if [ -n "$BASH_ENV" ]; then . "$BASH_ENV"; fi
+but the value of the 'PATH' variable is not used to search for the
+filename.
+
+   As noted above, if a non-interactive shell is invoked with the
+'--login' option, Bash attempts to read and execute commands from the
+login shell startup files.
+
+Invoked with name 'sh'
+......................
+
+If Bash is invoked with the name 'sh', it tries to mimic the startup
+behavior of historical versions of 'sh' as closely as possible, while
+conforming to the POSIX standard as well.
+
+   When invoked as an interactive login shell, or as a non-interactive
+shell with the '--login' option, it first attempts to read and execute
+commands from '/etc/profile' and '~/.profile', in that order.  The
+'--noprofile' option may be used to inhibit this behavior.  When invoked
+as an interactive shell with the name 'sh', Bash looks for the variable
+'ENV', expands its value if it is defined, and uses the expanded value
+as the name of a file to read and execute.  Since a shell invoked as
+'sh' does not attempt to read and execute commands from any other
+startup files, the '--rcfile' option has no effect.  A non-interactive
+shell invoked with the name 'sh' does not attempt to read any other
+startup files.
+
+   When invoked as 'sh', Bash enters POSIX mode after the startup files
+are read.
+
+Invoked in POSIX mode
+.....................
+
+When Bash is started in POSIX mode, as with the '--posix' command line
+option, it follows the POSIX standard for startup files.  In this mode,
+interactive shells expand the 'ENV' variable and commands are read and
+executed from the file whose name is the expanded value.  No other
+startup files are read.
+
+Invoked by remote shell daemon
+..............................
+
+Bash attempts to determine when it is being run with its standard input
+connected to a network connection, as when executed by the remote shell
+daemon, usually 'rshd', or the secure shell daemon 'sshd'.  If Bash
+determines it is being run in this fashion, it reads and executes
+commands from '~/.bashrc', if that file exists and is readable.  It will
+not do this if invoked as 'sh'.  The '--norc' option may be used to
+inhibit this behavior, and the '--rcfile' option may be used to force
+another file to be read, but neither 'rshd' nor 'sshd' generally invoke
+the shell with those options or allow them to be specified.
+
+Invoked with unequal effective and real UID/GIDs
+................................................
+
+If Bash is started with the effective user (group) id not equal to the
+real user (group) id, and the '-p' option is not supplied, no startup
+files are read, shell functions are not inherited from the environment,
+the 'SHELLOPTS', 'BASHOPTS', 'CDPATH', and 'GLOBIGNORE' variables, if
+they appear in the environment, are ignored, and the effective user id
+is set to the real user id.  If the '-p' option is supplied at
+invocation, the startup behavior is the same, but the effective user id
+is not reset.
+
+
+File: bash.info,  Node: Interactive Shells,  Next: Bash Conditional Expressions,  Prev: Bash Startup Files,  Up: Bash Features
+
+6.3 Interactive Shells
+======================
+
+* Menu:
+
+* What is an Interactive Shell?::	What determines whether a shell is Interactive.
+* Is this Shell Interactive?::	How to tell if a shell is interactive.
+* Interactive Shell Behavior::	What changes in a interactive shell?
+
+
+File: bash.info,  Node: What is an Interactive Shell?,  Next: Is this Shell Interactive?,  Up: Interactive Shells
+
+6.3.1 What is an Interactive Shell?
+-----------------------------------
+
+An interactive shell is one started without non-option arguments, unless
+'-s' is specified, without specifying the '-c' option, and whose input
+and error output are both connected to terminals (as determined by
+'isatty(3)'), or one started with the '-i' option.
+
+   An interactive shell generally reads from and writes to a user's
+terminal.
+
+   The '-s' invocation option may be used to set the positional
+parameters when an interactive shell is started.
+
+
+File: bash.info,  Node: Is this Shell Interactive?,  Next: Interactive Shell Behavior,  Prev: What is an Interactive Shell?,  Up: Interactive Shells
+
+6.3.2 Is this Shell Interactive?
+--------------------------------
+
+To determine within a startup script whether or not Bash is running
+interactively, test the value of the '-' special parameter.  It contains
+'i' when the shell is interactive.  For example:
+
+     case "$-" in
+     *i*)	echo This shell is interactive ;;
+     *)	echo This shell is not interactive ;;
+     esac
+
+   Alternatively, startup scripts may examine the variable 'PS1'; it is
+unset in non-interactive shells, and set in interactive shells.  Thus:
+
+     if [ -z "$PS1" ]; then
+             echo This shell is not interactive
+     else
+             echo This shell is interactive
+     fi
+
+
+File: bash.info,  Node: Interactive Shell Behavior,  Prev: Is this Shell Interactive?,  Up: Interactive Shells
+
+6.3.3 Interactive Shell Behavior
+--------------------------------
+
+When the shell is running interactively, it changes its behavior in
+several ways.
+
+  1. Startup files are read and executed as described in *note Bash
+     Startup Files::.
+
+  2. Job Control (*note Job Control::) is enabled by default.  When job
+     control is in effect, Bash ignores the keyboard-generated job
+     control signals 'SIGTTIN', 'SIGTTOU', and 'SIGTSTP'.
+
+  3. Bash expands and displays 'PS1' before reading the first line of a
+     command, and expands and displays 'PS2' before reading the second
+     and subsequent lines of a multi-line command.  Bash expands and
+     displays 'PS0' after it reads a command but before executing it.
+     See *note Controlling the Prompt::, for a complete list of prompt
+     string escape sequences.
+
+  4. Bash executes the values of the set elements of the
+     'PROMPT_COMMANDS' array variable as commands before printing the
+     primary prompt, '$PS1' (*note Bash Variables::).
+
+  5. Readline (*note Command Line Editing::) is used to read commands
+     from the user's terminal.
+
+  6. Bash inspects the value of the 'ignoreeof' option to 'set -o'
+     instead of exiting immediately when it receives an 'EOF' on its
+     standard input when reading a command (*note The Set Builtin::).
+
+  7. Command history (*note Bash History Facilities::) and history
+     expansion (*note History Interaction::) are enabled by default.
+     Bash will save the command history to the file named by '$HISTFILE'
+     when a shell with history enabled exits.
+
+  8. Alias expansion (*note Aliases::) is performed by default.
+
+  9. In the absence of any traps, Bash ignores 'SIGTERM' (*note
+     Signals::).
+
+  10. In the absence of any traps, 'SIGINT' is caught and handled (*note
+     Signals::).  'SIGINT' will interrupt some shell builtins.
+
+  11. An interactive login shell sends a 'SIGHUP' to all jobs on exit if
+     the 'huponexit' shell option has been enabled (*note Signals::).
+
+  12. The '-n' invocation option is ignored, and 'set -n' has no effect
+     (*note The Set Builtin::).
+
+  13. Bash will check for mail periodically, depending on the values of
+     the 'MAIL', 'MAILPATH', and 'MAILCHECK' shell variables (*note Bash
+     Variables::).
+
+  14. Expansion errors due to references to unbound shell variables
+     after 'set -u' has been enabled will not cause the shell to exit
+     (*note The Set Builtin::).
+
+  15. The shell will not exit on expansion errors caused by VAR being
+     unset or null in '${VAR:?WORD}' expansions (*note Shell Parameter
+     Expansion::).
+
+  16. Redirection errors encountered by shell builtins will not cause
+     the shell to exit.
+
+  17. When running in POSIX mode, a special builtin returning an error
+     status will not cause the shell to exit (*note Bash POSIX Mode::).
+
+  18. A failed 'exec' will not cause the shell to exit (*note Bourne
+     Shell Builtins::).
+
+  19. Parser syntax errors will not cause the shell to exit.
+
+  20. Simple spelling correction for directory arguments to the 'cd'
+     builtin is enabled by default (see the description of the 'cdspell'
+     option to the 'shopt' builtin in *note The Shopt Builtin::).
+
+  21. The shell will check the value of the 'TMOUT' variable and exit if
+     a command is not read within the specified number of seconds after
+     printing '$PS1' (*note Bash Variables::).
+
+
+File: bash.info,  Node: Bash Conditional Expressions,  Next: Shell Arithmetic,  Prev: Interactive Shells,  Up: Bash Features
+
+6.4 Bash Conditional Expressions
+================================
+
+Conditional expressions are used by the '[[' compound command and the
+'test' and '[' builtin commands.  The 'test' and '[' commands determine
+their behavior based on the number of arguments; see the descriptions of
+those commands for any other command-specific actions.
+
+   Expressions may be unary or binary, and are formed from the following
+primaries.  Unary expressions are often used to examine the status of a
+file.  There are string operators and numeric comparison operators as
+well.  Bash handles several filenames specially when they are used in
+expressions.  If the operating system on which Bash is running provides
+these special files, Bash will use them; otherwise it will emulate them
+internally with this behavior: If the FILE argument to one of the
+primaries is of the form '/dev/fd/N', then file descriptor N is checked.
+If the FILE argument to one of the primaries is one of '/dev/stdin',
+'/dev/stdout', or '/dev/stderr', file descriptor 0, 1, or 2,
+respectively, is checked.
+
+   When used with '[[', the '<' and '>' operators sort lexicographically
+using the current locale.  The 'test' command uses ASCII ordering.
+
+   Unless otherwise specified, primaries that operate on files follow
+symbolic links and operate on the target of the link, rather than the
+link itself.
+
+'-a FILE'
+     True if FILE exists.
+
+'-b FILE'
+     True if FILE exists and is a block special file.
+
+'-c FILE'
+     True if FILE exists and is a character special file.
+
+'-d FILE'
+     True if FILE exists and is a directory.
+
+'-e FILE'
+     True if FILE exists.
+
+'-f FILE'
+     True if FILE exists and is a regular file.
+
+'-g FILE'
+     True if FILE exists and its set-group-id bit is set.
+
+'-h FILE'
+     True if FILE exists and is a symbolic link.
+
+'-k FILE'
+     True if FILE exists and its "sticky" bit is set.
+
+'-p FILE'
+     True if FILE exists and is a named pipe (FIFO).
+
+'-r FILE'
+     True if FILE exists and is readable.
+
+'-s FILE'
+     True if FILE exists and has a size greater than zero.
+
+'-t FD'
+     True if file descriptor FD is open and refers to a terminal.
+
+'-u FILE'
+     True if FILE exists and its set-user-id bit is set.
+
+'-w FILE'
+     True if FILE exists and is writable.
+
+'-x FILE'
+     True if FILE exists and is executable.
+
+'-G FILE'
+     True if FILE exists and is owned by the effective group id.
+
+'-L FILE'
+     True if FILE exists and is a symbolic link.
+
+'-N FILE'
+     True if FILE exists and has been modified since it was last read.
+
+'-O FILE'
+     True if FILE exists and is owned by the effective user id.
+
+'-S FILE'
+     True if FILE exists and is a socket.
+
+'FILE1 -ef FILE2'
+     True if FILE1 and FILE2 refer to the same device and inode numbers.
+
+'FILE1 -nt FILE2'
+     True if FILE1 is newer (according to modification date) than FILE2,
+     or if FILE1 exists and FILE2 does not.
+
+'FILE1 -ot FILE2'
+     True if FILE1 is older than FILE2, or if FILE2 exists and FILE1
+     does not.
+
+'-o OPTNAME'
+     True if the shell option OPTNAME is enabled.  The list of options
+     appears in the description of the '-o' option to the 'set' builtin
+     (*note The Set Builtin::).
+
+'-v VARNAME'
+     True if the shell variable VARNAME is set (has been assigned a
+     value).
+
+'-R VARNAME'
+     True if the shell variable VARNAME is set and is a name reference.
+
+'-z STRING'
+     True if the length of STRING is zero.
+
+'-n STRING'
+'STRING'
+     True if the length of STRING is non-zero.
+
+'STRING1 == STRING2'
+'STRING1 = STRING2'
+     True if the strings are equal.  When used with the '[[' command,
+     this performs pattern matching as described above (*note
+     Conditional Constructs::).
+
+     '=' should be used with the 'test' command for POSIX conformance.
+
+'STRING1 != STRING2'
+     True if the strings are not equal.
+
+'STRING1 < STRING2'
+     True if STRING1 sorts before STRING2 lexicographically.
+
+'STRING1 > STRING2'
+     True if STRING1 sorts after STRING2 lexicographically.
+
+'ARG1 OP ARG2'
+     'OP' is one of '-eq', '-ne', '-lt', '-le', '-gt', or '-ge'.  These
+     arithmetic binary operators return true if ARG1 is equal to, not
+     equal to, less than, less than or equal to, greater than, or
+     greater than or equal to ARG2, respectively.  ARG1 and ARG2 may be
+     positive or negative integers.  When used with the '[[' command,
+     ARG1 and ARG2 are evaluated as arithmetic expressions (*note Shell
+     Arithmetic::).
+
+
+File: bash.info,  Node: Shell Arithmetic,  Next: Aliases,  Prev: Bash Conditional Expressions,  Up: Bash Features
+
+6.5 Shell Arithmetic
+====================
+
+The shell allows arithmetic expressions to be evaluated, as one of the
+shell expansions or by using the '((' compound command, the 'let'
+builtin, or the '-i' option to the 'declare' builtin.
+
+   Evaluation is done in fixed-width integers with no check for
+overflow, though division by 0 is trapped and flagged as an error.  The
+operators and their precedence, associativity, and values are the same
+as in the C language.  The following list of operators is grouped into
+levels of equal-precedence operators.  The levels are listed in order of
+decreasing precedence.
+
+'ID++ ID--'
+     variable post-increment and post-decrement
+
+'++ID --ID'
+     variable pre-increment and pre-decrement
+
+'- +'
+     unary minus and plus
+
+'! ~'
+     logical and bitwise negation
+
+'**'
+     exponentiation
+
+'* / %'
+     multiplication, division, remainder
+
+'+ -'
+     addition, subtraction
+
+'<< >>'
+     left and right bitwise shifts
+
+'<= >= < >'
+     comparison
+
+'== !='
+     equality and inequality
+
+'&'
+     bitwise AND
+
+'^'
+     bitwise exclusive OR
+
+'|'
+     bitwise OR
+
+'&&'
+     logical AND
+
+'||'
+     logical OR
+
+'expr ? expr : expr'
+     conditional operator
+
+'= *= /= %= += -= <<= >>= &= ^= |='
+     assignment
+
+'expr1 , expr2'
+     comma
+
+   Shell variables are allowed as operands; parameter expansion is
+performed before the expression is evaluated.  Within an expression,
+shell variables may also be referenced by name without using the
+parameter expansion syntax.  A shell variable that is null or unset
+evaluates to 0 when referenced by name without using the parameter
+expansion syntax.  The value of a variable is evaluated as an arithmetic
+expression when it is referenced, or when a variable which has been
+given the INTEGER attribute using 'declare -i' is assigned a value.  A
+null value evaluates to 0.  A shell variable need not have its INTEGER
+attribute turned on to be used in an expression.
+
+   Integer constants follow the C language definition, without suffixes
+or character constants.  Constants with a leading 0 are interpreted as
+octal numbers.  A leading '0x' or '0X' denotes hexadecimal.  Otherwise,
+numbers take the form [BASE'#']N, where the optional BASE is a decimal
+number between 2 and 64 representing the arithmetic base, and N is a
+number in that base.  If BASE'#' is omitted, then base 10 is used.  When
+specifying N, if a non-digit is required, the digits greater than 9 are
+represented by the lowercase letters, the uppercase letters, '@', and
+'_', in that order.  If BASE is less than or equal to 36, lowercase and
+uppercase letters may be used interchangeably to represent numbers
+between 10 and 35.
+
+   Operators are evaluated in order of precedence.  Sub-expressions in
+parentheses are evaluated first and may override the precedence rules
+above.
+
+
+File: bash.info,  Node: Aliases,  Next: Arrays,  Prev: Shell Arithmetic,  Up: Bash Features
+
+6.6 Aliases
+===========
+
+ALIASES allow a string to be substituted for a word when it is used as
+the first word of a simple command.  The shell maintains a list of
+aliases that may be set and unset with the 'alias' and 'unalias' builtin
+commands.
+
+   The first word of each simple command, if unquoted, is checked to see
+if it has an alias.  If so, that word is replaced by the text of the
+alias.  The characters '/', '$', '`', '=' and any of the shell
+metacharacters or quoting characters listed above may not appear in an
+alias name.  The replacement text may contain any valid shell input,
+including shell metacharacters.  The first word of the replacement text
+is tested for aliases, but a word that is identical to an alias being
+expanded is not expanded a second time.  This means that one may alias
+'ls' to '"ls -F"', for instance, and Bash does not try to recursively
+expand the replacement text.  If the last character of the alias value
+is a BLANK, then the next command word following the alias is also
+checked for alias expansion.
+
+   Aliases are created and listed with the 'alias' command, and removed
+with the 'unalias' command.
+
+   There is no mechanism for using arguments in the replacement text, as
+in 'csh'.  If arguments are needed, a shell function should be used
+(*note Shell Functions::).
+
+   Aliases are not expanded when the shell is not interactive, unless
+the 'expand_aliases' shell option is set using 'shopt' (*note The Shopt
+Builtin::).
+
+   The rules concerning the definition and use of aliases are somewhat
+confusing.  Bash always reads at least one complete line of input, and
+all lines that make up a compound command, before executing any of the
+commands on that line or the compound command.  Aliases are expanded
+when a command is read, not when it is executed.  Therefore, an alias
+definition appearing on the same line as another command does not take
+effect until the next line of input is read.  The commands following the
+alias definition on that line are not affected by the new alias.  This
+behavior is also an issue when functions are executed.  Aliases are
+expanded when a function definition is read, not when the function is
+executed, because a function definition is itself a command.  As a
+consequence, aliases defined in a function are not available until after
+that function is executed.  To be safe, always put alias definitions on
+a separate line, and do not use 'alias' in compound commands.
+
+   For almost every purpose, shell functions are preferred over aliases.
+
+
+File: bash.info,  Node: Arrays,  Next: The Directory Stack,  Prev: Aliases,  Up: Bash Features
+
+6.7 Arrays
+==========
+
+Bash provides one-dimensional indexed and associative array variables.
+Any variable may be used as an indexed array; the 'declare' builtin will
+explicitly declare an array.  There is no maximum limit on the size of
+an array, nor any requirement that members be indexed or assigned
+contiguously.  Indexed arrays are referenced using integers (including
+arithmetic expressions (*note Shell Arithmetic::)) and are zero-based;
+associative arrays use arbitrary strings.  Unless otherwise noted,
+indexed array indices must be non-negative integers.
+
+   An indexed array is created automatically if any variable is assigned
+to using the syntax
+     NAME[SUBSCRIPT]=VALUE
+
+The SUBSCRIPT is treated as an arithmetic expression that must evaluate
+to a number.  To explicitly declare an array, use
+     declare -a NAME
+The syntax
+     declare -a NAME[SUBSCRIPT]
+is also accepted; the SUBSCRIPT is ignored.
+
+Associative arrays are created using
+     declare -A NAME
+
+   Attributes may be specified for an array variable using the 'declare'
+and 'readonly' builtins.  Each attribute applies to all members of an
+array.
+
+   Arrays are assigned to using compound assignments of the form
+     NAME=(VALUE1 VALUE2 ... )
+where each VALUE may be of the form '[SUBSCRIPT]='STRING.  Indexed array
+assignments do not require anything but STRING.  When assigning to
+indexed arrays, if the optional subscript is supplied, that index is
+assigned to; otherwise the index of the element assigned is the last
+index assigned to by the statement plus one.  Indexing starts at zero.
+
+   Each VALUE in the list undergoes all the shell expansions described
+above (*note Shell Expansions::).
+
+   When assigning to an associative array, the words in a compound
+assignment may be either assignment statements, for which the subscript
+is required, or a list of words that is interpreted as a sequence of
+alternating keys and values: NAME=(KEY1 VALUE1 KEY2 VALUE2 ... ).  These
+are treated identically to NAME=( [KEY1]=VALUE1 [KEY2]=VALUE2 ... ).
+The first word in the list determines how the remaining words are
+interpreted; all assignments in a list must be of the same type.  When
+using key/value pairs, the keys may not be missing or empty; a final
+missing value is treated like the empty string.
+
+   This syntax is also accepted by the 'declare' builtin.  Individual
+array elements may be assigned to using the 'NAME[SUBSCRIPT]=VALUE'
+syntax introduced above.
+
+   When assigning to an indexed array, if NAME is subscripted by a
+negative number, that number is interpreted as relative to one greater
+than the maximum index of NAME, so negative indices count back from the
+end of the array, and an index of -1 references the last element.
+
+   Any element of an array may be referenced using '${NAME[SUBSCRIPT]}'.
+The braces are required to avoid conflicts with the shell's filename
+expansion operators.  If the SUBSCRIPT is '@' or '*', the word expands
+to all members of the array NAME.  These subscripts differ only when the
+word appears within double quotes.  If the word is double-quoted,
+'${NAME[*]}' expands to a single word with the value of each array
+member separated by the first character of the 'IFS' variable, and
+'${NAME[@]}' expands each element of NAME to a separate word.  When
+there are no array members, '${NAME[@]}' expands to nothing.  If the
+double-quoted expansion occurs within a word, the expansion of the first
+parameter is joined with the beginning part of the original word, and
+the expansion of the last parameter is joined with the last part of the
+original word.  This is analogous to the expansion of the special
+parameters '@' and '*'.  '${#NAME[SUBSCRIPT]}' expands to the length of
+'${NAME[SUBSCRIPT]}'.  If SUBSCRIPT is '@' or '*', the expansion is the
+number of elements in the array.  If the SUBSCRIPT used to reference an
+element of an indexed array evaluates to a number less than zero, it is
+interpreted as relative to one greater than the maximum index of the
+array, so negative indices count back from the end of the array, and an
+index of -1 refers to the last element.
+
+   Referencing an array variable without a subscript is equivalent to
+referencing with a subscript of 0.  Any reference to a variable using a
+valid subscript is legal, and 'bash' will create an array if necessary.
+
+   An array variable is considered set if a subscript has been assigned
+a value.  The null string is a valid value.
+
+   It is possible to obtain the keys (indices) of an array as well as
+the values.  ${!NAME[@]} and ${!NAME[*]} expand to the indices assigned
+in array variable NAME.  The treatment when in double quotes is similar
+to the expansion of the special parameters '@' and '*' within double
+quotes.
+
+   The 'unset' builtin is used to destroy arrays.  'unset
+NAME[SUBSCRIPT]' destroys the array element at index SUBSCRIPT.
+Negative subscripts to indexed arrays are interpreted as described
+above.  Unsetting the last element of an array variable does not unset
+the variable.  'unset NAME', where NAME is an array, removes the entire
+array.  A subscript of '*' or '@' also removes the entire array.
+
+   When using a variable name with a subscript as an argument to a
+command, such as with 'unset', without using the word expansion syntax
+described above, the argument is subject to the shell's filename
+expansion.  If filename expansion is not desired, the argument should be
+quoted.
+
+   The 'declare', 'local', and 'readonly' builtins each accept a '-a'
+option to specify an indexed array and a '-A' option to specify an
+associative array.  If both options are supplied, '-A' takes precedence.
+The 'read' builtin accepts a '-a' option to assign a list of words read
+from the standard input to an array, and can read values from the
+standard input into individual array elements.  The 'set' and 'declare'
+builtins display array values in a way that allows them to be reused as
+input.
+
+
+File: bash.info,  Node: The Directory Stack,  Next: Controlling the Prompt,  Prev: Arrays,  Up: Bash Features
+
+6.8 The Directory Stack
+=======================
+
+* Menu:
+
+* Directory Stack Builtins::		Bash builtin commands to manipulate
+					the directory stack.
+
+The directory stack is a list of recently-visited directories.  The
+'pushd' builtin adds directories to the stack as it changes the current
+directory, and the 'popd' builtin removes specified directories from the
+stack and changes the current directory to the directory removed.  The
+'dirs' builtin displays the contents of the directory stack.  The
+current directory is always the "top" of the directory stack.
+
+   The contents of the directory stack are also visible as the value of
+the 'DIRSTACK' shell variable.
+
+
+File: bash.info,  Node: Directory Stack Builtins,  Up: The Directory Stack
+
+6.8.1 Directory Stack Builtins
+------------------------------
+
+'dirs'
+          dirs [-clpv] [+N | -N]
+
+     Display the list of currently remembered directories.  Directories
+     are added to the list with the 'pushd' command; the 'popd' command
+     removes directories from the list.  The current directory is always
+     the first directory in the stack.
+
+     '-c'
+          Clears the directory stack by deleting all of the elements.
+     '-l'
+          Produces a listing using full pathnames; the default listing
+          format uses a tilde to denote the home directory.
+     '-p'
+          Causes 'dirs' to print the directory stack with one entry per
+          line.
+     '-v'
+          Causes 'dirs' to print the directory stack with one entry per
+          line, prefixing each entry with its index in the stack.
+     '+N'
+          Displays the Nth directory (counting from the left of the list
+          printed by 'dirs' when invoked without options), starting with
+          zero.
+     '-N'
+          Displays the Nth directory (counting from the right of the
+          list printed by 'dirs' when invoked without options), starting
+          with zero.
+
+'popd'
+          popd [-n] [+N | -N]
+
+     When no arguments are given, 'popd' removes the top directory from
+     the stack and performs a 'cd' to the new top directory.  The
+     elements are numbered from 0 starting at the first directory listed
+     with 'dirs'; that is, 'popd' is equivalent to 'popd +0'.
+
+     '-n'
+          Suppresses the normal change of directory when removing
+          directories from the stack, so that only the stack is
+          manipulated.
+     '+N'
+          Removes the Nth directory (counting from the left of the list
+          printed by 'dirs'), starting with zero.
+     '-N'
+          Removes the Nth directory (counting from the right of the list
+          printed by 'dirs'), starting with zero.
+
+'pushd'
+          pushd [-n] [+N | -N | DIR]
+
+     Save the current directory on the top of the directory stack and
+     then 'cd' to DIR.  With no arguments, 'pushd' exchanges the top two
+     directories and makes the new top the current directory.
+
+     '-n'
+          Suppresses the normal change of directory when rotating or
+          adding directories to the stack, so that only the stack is
+          manipulated.
+     '+N'
+          Brings the Nth directory (counting from the left of the list
+          printed by 'dirs', starting with zero) to the top of the list
+          by rotating the stack.
+     '-N'
+          Brings the Nth directory (counting from the right of the list
+          printed by 'dirs', starting with zero) to the top of the list
+          by rotating the stack.
+     'DIR'
+          Makes DIR be the top of the stack, making it the new current
+          directory as if it had been supplied as an argument to the
+          'cd' builtin.
+
+
+File: bash.info,  Node: Controlling the Prompt,  Next: The Restricted Shell,  Prev: The Directory Stack,  Up: Bash Features
+
+6.9 Controlling the Prompt
+==========================
+
+Bash examines the value of the array variable 'PROMPT_COMMANDS' just
+before printing each primary prompt.  If any elements in
+'PROMPT_COMMANDS' are set and non-null, Bash executes each value, in
+numeric order, just as if it had been typed on the command line.
+
+   In addition, the following table describes the special characters
+which can appear in the prompt variables 'PS0', 'PS1', 'PS2', and 'PS4':
+
+'\a'
+     A bell character.
+'\d'
+     The date, in "Weekday Month Date" format (e.g., "Tue May 26").
+'\D{FORMAT}'
+     The FORMAT is passed to 'strftime'(3) and the result is inserted
+     into the prompt string; an empty FORMAT results in a
+     locale-specific time representation.  The braces are required.
+'\e'
+     An escape character.
+'\h'
+     The hostname, up to the first '.'.
+'\H'
+     The hostname.
+'\j'
+     The number of jobs currently managed by the shell.
+'\l'
+     The basename of the shell's terminal device name.
+'\n'
+     A newline.
+'\r'
+     A carriage return.
+'\s'
+     The name of the shell, the basename of '$0' (the portion following
+     the final slash).
+'\t'
+     The time, in 24-hour HH:MM:SS format.
+'\T'
+     The time, in 12-hour HH:MM:SS format.
+'\@'
+     The time, in 12-hour am/pm format.
+'\A'
+     The time, in 24-hour HH:MM format.
+'\u'
+     The username of the current user.
+'\v'
+     The version of Bash (e.g., 2.00)
+'\V'
+     The release of Bash, version + patchlevel (e.g., 2.00.0)
+'\w'
+     The current working directory, with '$HOME' abbreviated with a
+     tilde (uses the '$PROMPT_DIRTRIM' variable).
+'\W'
+     The basename of '$PWD', with '$HOME' abbreviated with a tilde.
+'\!'
+     The history number of this command.
+'\#'
+     The command number of this command.
+'\$'
+     If the effective uid is 0, '#', otherwise '$'.
+'\NNN'
+     The character whose ASCII code is the octal value NNN.
+'\\'
+     A backslash.
+'\['
+     Begin a sequence of non-printing characters.  This could be used to
+     embed a terminal control sequence into the prompt.
+'\]'
+     End a sequence of non-printing characters.
+
+   The command number and the history number are usually different: the
+history number of a command is its position in the history list, which
+may include commands restored from the history file (*note Bash History
+Facilities::), while the command number is the position in the sequence
+of commands executed during the current shell session.
+
+   After the string is decoded, it is expanded via parameter expansion,
+command substitution, arithmetic expansion, and quote removal, subject
+to the value of the 'promptvars' shell option (*note The Shopt
+Builtin::).  This can have unwanted side effects if escaped portions of
+the string appear within command substitution or contain characters
+special to word expansion.
+
+
+File: bash.info,  Node: The Restricted Shell,  Next: Bash POSIX Mode,  Prev: Controlling the Prompt,  Up: Bash Features
+
+6.10 The Restricted Shell
+=========================
+
+If Bash is started with the name 'rbash', or the '--restricted' or '-r'
+option is supplied at invocation, the shell becomes restricted.  A
+restricted shell is used to set up an environment more controlled than
+the standard shell.  A restricted shell behaves identically to 'bash'
+with the exception that the following are disallowed or not performed:
+
+   * Changing directories with the 'cd' builtin.
+   * Setting or unsetting the values of the 'SHELL', 'PATH', 'HISTFILE',
+     'ENV', or 'BASH_ENV' variables.
+   * Specifying command names containing slashes.
+   * Specifying a filename containing a slash as an argument to the '.'
+     builtin command.
+   * Specifying a filename containing a slash as an argument to the
+     'history' builtin command.
+   * Specifying a filename containing a slash as an argument to the '-p'
+     option to the 'hash' builtin command.
+   * Importing function definitions from the shell environment at
+     startup.
+   * Parsing the value of 'SHELLOPTS' from the shell environment at
+     startup.
+   * Redirecting output using the '>', '>|', '<>', '>&', '&>', and '>>'
+     redirection operators.
+   * Using the 'exec' builtin to replace the shell with another command.
+   * Adding or deleting builtin commands with the '-f' and '-d' options
+     to the 'enable' builtin.
+   * Using the 'enable' builtin command to enable disabled shell
+     builtins.
+   * Specifying the '-p' option to the 'command' builtin.
+   * Turning off restricted mode with 'set +r' or 'set +o restricted'.
+
+   These restrictions are enforced after any startup files are read.
+
+   When a command that is found to be a shell script is executed (*note
+Shell Scripts::), 'rbash' turns off any restrictions in the shell
+spawned to execute the script.
+
+   The restricted shell mode is only one component of a useful
+restricted environment.  It should be accompanied by setting 'PATH' to a
+value that allows execution of only a few verified commands (commands
+that allow shell escapes are particularly vulnerable), leaving the user
+in a non-writable directory other than his home directory after login,
+not allowing the restricted shell to execute shell scripts, and cleaning
+the environment of variables that cause some commands to modify their
+behavior (e.g., 'VISUAL' or 'PAGER').
+
+   Modern systems provide more secure ways to implement a restricted
+environment, such as 'jails', 'zones', or 'containers'.
+
+
+File: bash.info,  Node: Bash POSIX Mode,  Next: Shell Compatibility Mode,  Prev: The Restricted Shell,  Up: Bash Features
+
+6.11 Bash POSIX Mode
+====================
+
+Starting Bash with the '--posix' command-line option or executing 'set
+-o posix' while Bash is running will cause Bash to conform more closely
+to the POSIX standard by changing the behavior to match that specified
+by POSIX in areas where the Bash default differs.
+
+   When invoked as 'sh', Bash enters POSIX mode after reading the
+startup files.
+
+   The following list is what's changed when 'POSIX mode' is in effect:
+
+  1. Bash ensures that the 'POSIXLY_CORRECT' variable is set.
+
+  2. When a command in the hash table no longer exists, Bash will
+     re-search '$PATH' to find the new location.  This is also available
+     with 'shopt -s checkhash'.
+
+  3. Bash will not insert a command without the execute bit set into the
+     command hash table, even if it returns it as a (last-ditch) result
+     from a '$PATH' search.
+
+  4. The message printed by the job control code and builtins when a job
+     exits with a non-zero status is 'Done(status)'.
+
+  5. The message printed by the job control code and builtins when a job
+     is stopped is 'Stopped(SIGNAME)', where SIGNAME is, for example,
+     'SIGTSTP'.
+
+  6. Alias expansion is always enabled, even in non-interactive shells.
+
+  7. Reserved words appearing in a context where reserved words are
+     recognized do not undergo alias expansion.
+
+  8. The POSIX 'PS1' and 'PS2' expansions of '!' to the history number
+     and '!!' to '!' are enabled, and parameter expansion is performed
+     on the values of 'PS1' and 'PS2' regardless of the setting of the
+     'promptvars' option.
+
+  9. The POSIX startup files are executed ('$ENV') rather than the
+     normal Bash files.
+
+  10. Tilde expansion is only performed on assignments preceding a
+     command name, rather than on all assignment statements on the line.
+
+  11. The default history file is '~/.sh_history' (this is the default
+     value of '$HISTFILE').
+
+  12. Redirection operators do not perform filename expansion on the
+     word in the redirection unless the shell is interactive.
+
+  13. Redirection operators do not perform word splitting on the word in
+     the redirection.
+
+  14. Function names must be valid shell 'name's.  That is, they may not
+     contain characters other than letters, digits, and underscores, and
+     may not start with a digit.  Declaring a function with an invalid
+     name causes a fatal syntax error in non-interactive shells.
+
+  15. Function names may not be the same as one of the POSIX special
+     builtins.
+
+  16. POSIX special builtins are found before shell functions during
+     command lookup.
+
+  17. When printing shell function definitions (e.g., by 'type'), Bash
+     does not print the 'function' keyword.
+
+  18. Literal tildes that appear as the first character in elements of
+     the 'PATH' variable are not expanded as described above under *note
+     Tilde Expansion::.
+
+  19. The 'time' reserved word may be used by itself as a command.  When
+     used in this way, it displays timing statistics for the shell and
+     its completed children.  The 'TIMEFORMAT' variable controls the
+     format of the timing information.
+
+  20. When parsing and expanding a ${...} expansion that appears within
+     double quotes, single quotes are no longer special and cannot be
+     used to quote a closing brace or other special character, unless
+     the operator is one of those defined to perform pattern removal.
+     In this case, they do not have to appear as matched pairs.
+
+  21. The parser does not recognize 'time' as a reserved word if the
+     next token begins with a '-'.
+
+  22. The '!' character does not introduce history expansion within a
+     double-quoted string, even if the 'histexpand' option is enabled.
+
+  23. If a POSIX special builtin returns an error status, a
+     non-interactive shell exits.  The fatal errors are those listed in
+     the POSIX standard, and include things like passing incorrect
+     options, redirection errors, variable assignment errors for
+     assignments preceding the command name, and so on.
+
+  24. A non-interactive shell exits with an error status if a variable
+     assignment error occurs when no command name follows the assignment
+     statements.  A variable assignment error occurs, for example, when
+     trying to assign a value to a readonly variable.
+
+  25. A non-interactive shell exits with an error status if a variable
+     assignment error occurs in an assignment statement preceding a
+     special builtin, but not with any other simple command.
+
+  26. A non-interactive shell exits with an error status if the
+     iteration variable in a 'for' statement or the selection variable
+     in a 'select' statement is a readonly variable.
+
+  27. Non-interactive shells exit if FILENAME in '.'  FILENAME is not
+     found.
+
+  28. Non-interactive shells exit if a syntax error in an arithmetic
+     expansion results in an invalid expression.
+
+  29. Non-interactive shells exit if a parameter expansion error occurs.
+
+  30. Non-interactive shells exit if there is a syntax error in a script
+     read with the '.' or 'source' builtins, or in a string processed by
+     the 'eval' builtin.
+
+  31. While variable indirection is available, it may not be applied to
+     the '#' and '?' special parameters.
+
+  32. When expanding the '*' special parameter in a pattern context
+     where the expansion is double-quoted does not treat the '$*' as if
+     it were double-quoted.
+
+  33. Assignment statements preceding POSIX special builtins persist in
+     the shell environment after the builtin completes.
+
+  34. The 'command' builtin does not prevent builtins that take
+     assignment statements as arguments from expanding them as
+     assignment statements; when not in POSIX mode, assignment builtins
+     lose their assignment statement expansion properties when preceded
+     by 'command'.
+
+  35. The 'bg' builtin uses the required format to describe each job
+     placed in the background, which does not include an indication of
+     whether the job is the current or previous job.
+
+  36. The output of 'kill -l' prints all the signal names on a single
+     line, separated by spaces, without the 'SIG' prefix.
+
+  37. The 'kill' builtin does not accept signal names with a 'SIG'
+     prefix.
+
+  38. The 'export' and 'readonly' builtin commands display their output
+     in the format required by POSIX.
+
+  39. The 'trap' builtin displays signal names without the leading
+     'SIG'.
+
+  40. The 'trap' builtin doesn't check the first argument for a possible
+     signal specification and revert the signal handling to the original
+     disposition if it is, unless that argument consists solely of
+     digits and is a valid signal number.  If users want to reset the
+     handler for a given signal to the original disposition, they should
+     use '-' as the first argument.
+
+  41. 'trap -p' displays signals whose dispositions are set to SIG_DFL
+     and those that were ignored when the shell started.
+
+  42. The '.' and 'source' builtins do not search the current directory
+     for the filename argument if it is not found by searching 'PATH'.
+
+  43. Enabling POSIX mode has the effect of setting the
+     'inherit_errexit' option, so subshells spawned to execute command
+     substitutions inherit the value of the '-e' option from the parent
+     shell.  When the 'inherit_errexit' option is not enabled, Bash
+     clears the '-e' option in such subshells.
+
+  44. Enabling POSIX mode has the effect of setting the 'shift_verbose'
+     option, so numeric arguments to 'shift' that exceed the number of
+     positional parameters will result in an error message.
+
+  45. When the 'alias' builtin displays alias definitions, it does not
+     display them with a leading 'alias ' unless the '-p' option is
+     supplied.
+
+  46. When the 'set' builtin is invoked without options, it does not
+     display shell function names and definitions.
+
+  47. When the 'set' builtin is invoked without options, it displays
+     variable values without quotes, unless they contain shell
+     metacharacters, even if the result contains nonprinting characters.
+
+  48. When the 'cd' builtin is invoked in LOGICAL mode, and the pathname
+     constructed from '$PWD' and the directory name supplied as an
+     argument does not refer to an existing directory, 'cd' will fail
+     instead of falling back to PHYSICAL mode.
+
+  49. When the 'cd' builtin cannot change a directory because the length
+     of the pathname constructed from '$PWD' and the directory name
+     supplied as an argument exceeds PATH_MAX when all symbolic links
+     are expanded, 'cd' will fail instead of attempting to use only the
+     supplied directory name.
+
+  50. The 'pwd' builtin verifies that the value it prints is the same as
+     the current directory, even if it is not asked to check the file
+     system with the '-P' option.
+
+  51. When listing the history, the 'fc' builtin does not include an
+     indication of whether or not a history entry has been modified.
+
+  52. The default editor used by 'fc' is 'ed'.
+
+  53. The 'type' and 'command' builtins will not report a non-executable
+     file as having been found, though the shell will attempt to execute
+     such a file if it is the only so-named file found in '$PATH'.
+
+  54. The 'vi' editing mode will invoke the 'vi' editor directly when
+     the 'v' command is run, instead of checking '$VISUAL' and
+     '$EDITOR'.
+
+  55. When the 'xpg_echo' option is enabled, Bash does not attempt to
+     interpret any arguments to 'echo' as options.  Each argument is
+     displayed, after escape characters are converted.
+
+  56. The 'ulimit' builtin uses a block size of 512 bytes for the '-c'
+     and '-f' options.
+
+  57. The arrival of 'SIGCHLD' when a trap is set on 'SIGCHLD' does not
+     interrupt the 'wait' builtin and cause it to return immediately.
+     The trap command is run once for each child that exits.
+
+  58. The 'read' builtin may be interrupted by a signal for which a trap
+     has been set.  If Bash receives a trapped signal while executing
+     'read', the trap handler executes and 'read' returns an exit status
+     greater than 128.
+
+  59. Bash removes an exited background process's status from the list
+     of such statuses after the 'wait' builtin is used to obtain it.
+
+   There is other POSIX behavior that Bash does not implement by default
+even when in POSIX mode.  Specifically:
+
+  1. The 'fc' builtin checks '$EDITOR' as a program to edit history
+     entries if 'FCEDIT' is unset, rather than defaulting directly to
+     'ed'.  'fc' uses 'ed' if 'EDITOR' is unset.
+
+  2. As noted above, Bash requires the 'xpg_echo' option to be enabled
+     for the 'echo' builtin to be fully conformant.
+
+   Bash can be configured to be POSIX-conformant by default, by
+specifying the '--enable-strict-posix-default' to 'configure' when
+building (*note Optional Features::).
+
+
+File: bash.info,  Node: Shell Compatibility Mode,  Prev: Bash POSIX Mode,  Up: Bash Features
+
+6.12 Shell Compatibility Mode
+=============================
+
+Bash-4.0 introduced the concept of a 'shell compatibility level',
+specified as a set of options to the shopt builtin ('compat31',
+'compat32', 'compat40', 'compat41', and so on).  There is only one
+current compatibility level - each option is mutually exclusive.  The
+compatibility level is intended to allow users to select behavior from
+previous versions that is incompatible with newer versions while they
+migrate scripts to use current features and behavior.  It's intended to
+be a temporary solution.
+
+   This section does not mention behavior that is standard for a
+particular version (e.g., setting 'compat32' means that quoting the rhs
+of the regexp matching operator quotes special regexp characters in the
+word, which is default behavior in bash-3.2 and above).
+
+   If a user enables, say, 'compat32', it may affect the behavior of
+other compatibility levels up to and including the current compatibility
+level.  The idea is that each compatibility level controls behavior that
+changed in that version of Bash, but that behavior may have been present
+in earlier versions.  For instance, the change to use locale-based
+comparisons with the '[[' command came in bash-4.1, and earlier versions
+used ASCII-based comparisons, so enabling 'compat32' will enable
+ASCII-based comparisons as well.  That granularity may not be sufficient
+for all uses, and as a result users should employ compatibility levels
+carefully.  Read the documentation for a particular feature to find out
+the current behavior.
+
+   Bash-4.3 introduced a new shell variable: 'BASH_COMPAT'.  The value
+assigned to this variable (a decimal version number like 4.2, or an
+integer corresponding to the 'compat'NN option, like 42) determines the
+compatibility level.
+
+   Starting with bash-4.4, Bash has begun deprecating older
+compatibility levels.  Eventually, the options will be removed in favor
+of 'BASH_COMPAT'.
+
+   Bash-5.0 is the final version for which there will be an individual
+shopt option for the previous version.  Users should use 'BASH_COMPAT'
+on bash-5.0 and later versions.
+
+   The following table describes the behavior changes controlled by each
+compatibility level setting.  The 'compat'NN tag is used as shorthand
+for setting the compatibility level to NN using one of the following
+mechanisms.  For versions prior to bash-5.0, the compatibility level may
+be set using the corresponding 'compat'NN shopt option.  For bash-4.3
+and later versions, the 'BASH_COMPAT' variable is preferred, and it is
+required for bash-5.1 and later versions.
+
+'compat31'
+        * quoting the rhs of the '[[' command's regexp matching operator
+          (=~) has no special effect
+
+'compat32'
+        * interrupting a command list such as "a ; b ; c" causes the
+          execution of the next command in the list (in bash-4.0 and
+          later versions, the shell acts as if it received the
+          interrupt, so interrupting one command in a list aborts the
+          execution of the entire list)
+
+'compat40'
+        * the '<' and '>' operators to the '[[' command do not consider
+          the current locale when comparing strings; they use ASCII
+          ordering.  Bash versions prior to bash-4.1 use ASCII collation
+          and strcmp(3); bash-4.1 and later use the current locale's
+          collation sequence and strcoll(3).
+
+'compat41'
+        * in posix mode, 'time' may be followed by options and still be
+          recognized as a reserved word (this is POSIX interpretation
+          267)
+        * in posix mode, the parser requires that an even number of
+          single quotes occur in the WORD portion of a double-quoted
+          ${...} parameter expansion and treats them specially, so that
+          characters within the single quotes are considered quoted
+          (this is POSIX interpretation 221)
+
+'compat42'
+        * the replacement string in double-quoted pattern substitution
+          does not undergo quote removal, as it does in versions after
+          bash-4.2
+        * in posix mode, single quotes are considered special when
+          expanding the WORD portion of a double-quoted ${...} parameter
+          expansion and can be used to quote a closing brace or other
+          special character (this is part of POSIX interpretation 221);
+          in later versions, single quotes are not special within
+          double-quoted word expansions
+
+'compat43'
+        * the shell does not print a warning message if an attempt is
+          made to use a quoted compound assignment as an argument to
+          declare (declare -a foo='(1 2)').  Later versions warn that
+          this usage is deprecated
+        * word expansion errors are considered non-fatal errors that
+          cause the current command to fail, even in posix mode (the
+          default behavior is to make them fatal errors that cause the
+          shell to exit)
+        * when executing a shell function, the loop state
+          (while/until/etc.)  is not reset, so 'break' or 'continue' in
+          that function will break or continue loops in the calling
+          context.  Bash-4.4 and later reset the loop state to prevent
+          this
+
+'compat44'
+        * the shell sets up the values used by 'BASH_ARGV' and
+          'BASH_ARGC' so they can expand to the shell's positional
+          parameters even if extended debugging mode is not enabled
+        * a subshell inherits loops from its parent context, so 'break'
+          or 'continue' will cause the subshell to exit.  Bash-5.0 and
+          later reset the loop state to prevent the exit
+        * variable assignments preceding builtins like 'export' and
+          'readonly' that set attributes continue to affect variables
+          with the same name in the calling environment even if the
+          shell is not in posix mode
+
+'compat50 (set using BASH_COMPAT)'
+        * Bash-5.1 changed the way '$RANDOM' is generated to introduce
+          slightly more randomness.  If the shell compatibility level is
+          set to 50 or lower, it reverts to the method from bash-5.0 and
+          previous versions, so seeding the random number generator by
+          assigning a value to 'RANDOM' will produce the same sequence
+          as in bash-5.0
+        * If the command hash table is empty, Bash versions prior to
+          bash-5.1 printed an informational message to that effect, even
+          when producing output that can be reused as input.  Bash-5.1
+          suppresses that message when the '-l' option is supplied.
+
+
+File: bash.info,  Node: Job Control,  Next: Command Line Editing,  Prev: Bash Features,  Up: Top
+
+7 Job Control
+*************
+
+This chapter discusses what job control is, how it works, and how Bash
+allows you to access its facilities.
+
+* Menu:
+
+* Job Control Basics::		How job control works.
+* Job Control Builtins::	Bash builtin commands used to interact
+				with job control.
+* Job Control Variables::	Variables Bash uses to customize job
+				control.
+
+
+File: bash.info,  Node: Job Control Basics,  Next: Job Control Builtins,  Up: Job Control
+
+7.1 Job Control Basics
+======================
+
+Job control refers to the ability to selectively stop (suspend) the
+execution of processes and continue (resume) their execution at a later
+point.  A user typically employs this facility via an interactive
+interface supplied jointly by the operating system kernel's terminal
+driver and Bash.
+
+   The shell associates a JOB with each pipeline.  It keeps a table of
+currently executing jobs, which may be listed with the 'jobs' command.
+When Bash starts a job asynchronously, it prints a line that looks like:
+     [1] 25647
+indicating that this job is job number 1 and that the process ID of the
+last process in the pipeline associated with this job is 25647.  All of
+the processes in a single pipeline are members of the same job.  Bash
+uses the JOB abstraction as the basis for job control.
+
+   To facilitate the implementation of the user interface to job
+control, the operating system maintains the notion of a current terminal
+process group ID.  Members of this process group (processes whose
+process group ID is equal to the current terminal process group ID)
+receive keyboard-generated signals such as 'SIGINT'.  These processes
+are said to be in the foreground.  Background processes are those whose
+process group ID differs from the terminal's; such processes are immune
+to keyboard-generated signals.  Only foreground processes are allowed to
+read from or, if the user so specifies with 'stty tostop', write to the
+terminal.  Background processes which attempt to read from (write to
+when 'stty tostop' is in effect) the terminal are sent a 'SIGTTIN'
+('SIGTTOU') signal by the kernel's terminal driver, which, unless
+caught, suspends the process.
+
+   If the operating system on which Bash is running supports job
+control, Bash contains facilities to use it.  Typing the SUSPEND
+character (typically '^Z', Control-Z) while a process is running causes
+that process to be stopped and returns control to Bash.  Typing the
+DELAYED SUSPEND character (typically '^Y', Control-Y) causes the process
+to be stopped when it attempts to read input from the terminal, and
+control to be returned to Bash.  The user then manipulates the state of
+this job, using the 'bg' command to continue it in the background, the
+'fg' command to continue it in the foreground, or the 'kill' command to
+kill it.  A '^Z' takes effect immediately, and has the additional side
+effect of causing pending output and typeahead to be discarded.
+
+   There are a number of ways to refer to a job in the shell.  The
+character '%' introduces a job specification (JOBSPEC).
+
+   Job number 'n' may be referred to as '%n'.  The symbols '%%' and '%+'
+refer to the shell's notion of the current job, which is the last job
+stopped while it was in the foreground or started in the background.  A
+single '%' (with no accompanying job specification) also refers to the
+current job.  The previous job may be referenced using '%-'.  If there
+is only a single job, '%+' and '%-' can both be used to refer to that
+job.  In output pertaining to jobs (e.g., the output of the 'jobs'
+command), the current job is always flagged with a '+', and the previous
+job with a '-'.
+
+   A job may also be referred to using a prefix of the name used to
+start it, or using a substring that appears in its command line.  For
+example, '%ce' refers to a stopped job whose command name begins with
+'ce'.  Using '%?ce', on the other hand, refers to any job containing the
+string 'ce' in its command line.  If the prefix or substring matches
+more than one job, Bash reports an error.
+
+   Simply naming a job can be used to bring it into the foreground: '%1'
+is a synonym for 'fg %1', bringing job 1 from the background into the
+foreground.  Similarly, '%1 &' resumes job 1 in the background,
+equivalent to 'bg %1'
+
+   The shell learns immediately whenever a job changes state.  Normally,
+Bash waits until it is about to print a prompt before reporting changes
+in a job's status so as to not interrupt any other output.  If the '-b'
+option to the 'set' builtin is enabled, Bash reports such changes
+immediately (*note The Set Builtin::).  Any trap on 'SIGCHLD' is
+executed for each child process that exits.
+
+   If an attempt to exit Bash is made while jobs are stopped, (or
+running, if the 'checkjobs' option is enabled - see *note The Shopt
+Builtin::), the shell prints a warning message, and if the 'checkjobs'
+option is enabled, lists the jobs and their statuses.  The 'jobs'
+command may then be used to inspect their status.  If a second attempt
+to exit is made without an intervening command, Bash does not print
+another warning, and any stopped jobs are terminated.
+
+   When the shell is waiting for a job or process using the 'wait'
+builtin, and job control is enabled, 'wait' will return when the job
+changes state.  The '-f' option causes 'wait' to wait until the job or
+process terminates before returning.
+
+
+File: bash.info,  Node: Job Control Builtins,  Next: Job Control Variables,  Prev: Job Control Basics,  Up: Job Control
+
+7.2 Job Control Builtins
+========================
+
+'bg'
+          bg [JOBSPEC ...]
+
+     Resume each suspended job JOBSPEC in the background, as if it had
+     been started with '&'.  If JOBSPEC is not supplied, the current job
+     is used.  The return status is zero unless it is run when job
+     control is not enabled, or, when run with job control enabled, any
+     JOBSPEC was not found or specifies a job that was started without
+     job control.
+
+'fg'
+          fg [JOBSPEC]
+
+     Resume the job JOBSPEC in the foreground and make it the current
+     job.  If JOBSPEC is not supplied, the current job is used.  The
+     return status is that of the command placed into the foreground, or
+     non-zero if run when job control is disabled or, when run with job
+     control enabled, JOBSPEC does not specify a valid job or JOBSPEC
+     specifies a job that was started without job control.
+
+'jobs'
+          jobs [-lnprs] [JOBSPEC]
+          jobs -x COMMAND [ARGUMENTS]
+
+     The first form lists the active jobs.  The options have the
+     following meanings:
+
+     '-l'
+          List process IDs in addition to the normal information.
+
+     '-n'
+          Display information only about jobs that have changed status
+          since the user was last notified of their status.
+
+     '-p'
+          List only the process ID of the job's process group leader.
+
+     '-r'
+          Display only running jobs.
+
+     '-s'
+          Display only stopped jobs.
+
+     If JOBSPEC is given, output is restricted to information about that
+     job.  If JOBSPEC is not supplied, the status of all jobs is listed.
+
+     If the '-x' option is supplied, 'jobs' replaces any JOBSPEC found
+     in COMMAND or ARGUMENTS with the corresponding process group ID,
+     and executes COMMAND, passing it ARGUMENTs, returning its exit
+     status.
+
+'kill'
+          kill [-s SIGSPEC] [-n SIGNUM] [-SIGSPEC] JOBSPEC or PID
+          kill -l|-L [EXIT_STATUS]
+
+     Send a signal specified by SIGSPEC or SIGNUM to the process named
+     by job specification JOBSPEC or process ID PID.  SIGSPEC is either
+     a case-insensitive signal name such as 'SIGINT' (with or without
+     the 'SIG' prefix) or a signal number; SIGNUM is a signal number.
+     If SIGSPEC and SIGNUM are not present, 'SIGTERM' is used.  The '-l'
+     option lists the signal names.  If any arguments are supplied when
+     '-l' is given, the names of the signals corresponding to the
+     arguments are listed, and the return status is zero.  EXIT_STATUS
+     is a number specifying a signal number or the exit status of a
+     process terminated by a signal.  The '-L' option is equivalent to
+     '-l'.  The return status is zero if at least one signal was
+     successfully sent, or non-zero if an error occurs or an invalid
+     option is encountered.
+
+'wait'
+          wait [-fn] [-p VARNAME] [JOBSPEC or PID ...]
+
+     Wait until the child process specified by each process ID PID or
+     job specification JOBSPEC exits and return the exit status of the
+     last command waited for.  If a job spec is given, all processes in
+     the job are waited for.  If no arguments are given, 'wait' waits
+     for all running background jobs and the last-executed process
+     substitution, if its process id is the same as $!, and the return
+     status is zero.  If the '-n' option is supplied, 'wait' waits for a
+     single job from the list of PIDS or JOBSPECS or, if no arguments
+     are supplied, any job, to complete and returns its exit status.  If
+     none of the supplied arguments is a child of the shell, or if no
+     arguments are supplied and the shell has no unwaited-for children,
+     the exit status is 127.  If the '-p' option is supplied, the
+     process or job identifier of the job for which the exit status is
+     returned is assigned to the variable VARNAME named by the option
+     argument.  The variable will be unset initially, before any
+     assignment.  This is useful only when the '-n' option is supplied.
+     Supplying the '-f' option, when job control is enabled, forces
+     'wait' to wait for each PID or JOBSPEC to terminate before
+     returning its status, intead of returning when it changes status.
+     If neither JOBSPEC nor PID specifies an active child process of the
+     shell, the return status is 127.
+
+'disown'
+          disown [-ar] [-h] [JOBSPEC ... | PID ... ]
+
+     Without options, remove each JOBSPEC from the table of active jobs.
+     If the '-h' option is given, the job is not removed from the table,
+     but is marked so that 'SIGHUP' is not sent to the job if the shell
+     receives a 'SIGHUP'.  If JOBSPEC is not present, and neither the
+     '-a' nor the '-r' option is supplied, the current job is used.  If
+     no JOBSPEC is supplied, the '-a' option means to remove or mark all
+     jobs; the '-r' option without a JOBSPEC argument restricts
+     operation to running jobs.
+
+'suspend'
+          suspend [-f]
+
+     Suspend the execution of this shell until it receives a 'SIGCONT'
+     signal.  A login shell cannot be suspended; the '-f' option can be
+     used to override this and force the suspension.
+
+   When job control is not active, the 'kill' and 'wait' builtins do not
+accept JOBSPEC arguments.  They must be supplied process IDs.
+
+
+File: bash.info,  Node: Job Control Variables,  Prev: Job Control Builtins,  Up: Job Control
+
+7.3 Job Control Variables
+=========================
+
+'auto_resume'
+     This variable controls how the shell interacts with the user and
+     job control.  If this variable exists then single word simple
+     commands without redirections are treated as candidates for
+     resumption of an existing job.  There is no ambiguity allowed; if
+     there is more than one job beginning with the string typed, then
+     the most recently accessed job will be selected.  The name of a
+     stopped job, in this context, is the command line used to start it.
+     If this variable is set to the value 'exact', the string supplied
+     must match the name of a stopped job exactly; if set to
+     'substring', the string supplied needs to match a substring of the
+     name of a stopped job.  The 'substring' value provides
+     functionality analogous to the '%?' job ID (*note Job Control
+     Basics::).  If set to any other value, the supplied string must be
+     a prefix of a stopped job's name; this provides functionality
+     analogous to the '%' job ID.
+
+
+File: bash.info,  Node: Command Line Editing,  Next: Using History Interactively,  Prev: Job Control,  Up: Top
+
+8 Command Line Editing
+**********************
+
+This chapter describes the basic features of the GNU command line
+editing interface.  Command line editing is provided by the Readline
+library, which is used by several different programs, including Bash.
+Command line editing is enabled by default when using an interactive
+shell, unless the '--noediting' option is supplied at shell invocation.
+Line editing is also used when using the '-e' option to the 'read'
+builtin command (*note Bash Builtins::).  By default, the line editing
+commands are similar to those of Emacs.  A vi-style line editing
+interface is also available.  Line editing can be enabled at any time
+using the '-o emacs' or '-o vi' options to the 'set' builtin command
+(*note The Set Builtin::), or disabled using the '+o emacs' or '+o vi'
+options to 'set'.
+
+* Menu:
+
+* Introduction and Notation::	Notation used in this text.
+* Readline Interaction::	The minimum set of commands for editing a line.
+* Readline Init File::		Customizing Readline from a user's view.
+* Bindable Readline Commands::	A description of most of the Readline commands
+				available for binding
+* Readline vi Mode::		A short description of how to make Readline
+				behave like the vi editor.
+* Programmable Completion::	How to specify the possible completions for
+				a specific command.
+* Programmable Completion Builtins::	Builtin commands to specify how to
+				complete arguments for a particular command.
+* A Programmable Completion Example::	An example shell function for
+				generating possible completions.
+
+
+File: bash.info,  Node: Introduction and Notation,  Next: Readline Interaction,  Up: Command Line Editing
+
+8.1 Introduction to Line Editing
+================================
+
+The following paragraphs describe the notation used to represent
+keystrokes.
+
+   The text 'C-k' is read as 'Control-K' and describes the character
+produced when the <k> key is pressed while the Control key is depressed.
+
+   The text 'M-k' is read as 'Meta-K' and describes the character
+produced when the Meta key (if you have one) is depressed, and the <k>
+key is pressed.  The Meta key is labeled <ALT> on many keyboards.  On
+keyboards with two keys labeled <ALT> (usually to either side of the
+space bar), the <ALT> on the left side is generally set to work as a
+Meta key.  The <ALT> key on the right may also be configured to work as
+a Meta key or may be configured as some other modifier, such as a
+Compose key for typing accented characters.
+
+   If you do not have a Meta or <ALT> key, or another key working as a
+Meta key, the identical keystroke can be generated by typing <ESC>
+_first_, and then typing <k>.  Either process is known as "metafying"
+the <k> key.
+
+   The text 'M-C-k' is read as 'Meta-Control-k' and describes the
+character produced by "metafying" 'C-k'.
+
+   In addition, several keys have their own names.  Specifically, <DEL>,
+<ESC>, <LFD>, <SPC>, <RET>, and <TAB> all stand for themselves when seen
+in this text, or in an init file (*note Readline Init File::).  If your
+keyboard lacks a <LFD> key, typing <C-j> will produce the desired
+character.  The <RET> key may be labeled <Return> or <Enter> on some
+keyboards.
+
+
+File: bash.info,  Node: Readline Interaction,  Next: Readline Init File,  Prev: Introduction and Notation,  Up: Command Line Editing
+
+8.2 Readline Interaction
+========================
+
+Often during an interactive session you type in a long line of text,
+only to notice that the first word on the line is misspelled.  The
+Readline library gives you a set of commands for manipulating the text
+as you type it in, allowing you to just fix your typo, and not forcing
+you to retype the majority of the line.  Using these editing commands,
+you move the cursor to the place that needs correction, and delete or
+insert the text of the corrections.  Then, when you are satisfied with
+the line, you simply press <RET>.  You do not have to be at the end of
+the line to press <RET>; the entire line is accepted regardless of the
+location of the cursor within the line.
+
+* Menu:
+
+* Readline Bare Essentials::	The least you need to know about Readline.
+* Readline Movement Commands::	Moving about the input line.
+* Readline Killing Commands::	How to delete text, and how to get it back!
+* Readline Arguments::		Giving numeric arguments to commands.
+* Searching::			Searching through previous lines.
+
+
+File: bash.info,  Node: Readline Bare Essentials,  Next: Readline Movement Commands,  Up: Readline Interaction
+
+8.2.1 Readline Bare Essentials
+------------------------------
+
+In order to enter characters into the line, simply type them.  The typed
+character appears where the cursor was, and then the cursor moves one
+space to the right.  If you mistype a character, you can use your erase
+character to back up and delete the mistyped character.
+
+   Sometimes you may mistype a character, and not notice the error until
+you have typed several other characters.  In that case, you can type
+'C-b' to move the cursor to the left, and then correct your mistake.
+Afterwards, you can move the cursor to the right with 'C-f'.
+
+   When you add text in the middle of a line, you will notice that
+characters to the right of the cursor are 'pushed over' to make room for
+the text that you have inserted.  Likewise, when you delete text behind
+the cursor, characters to the right of the cursor are 'pulled back' to
+fill in the blank space created by the removal of the text.  A list of
+the bare essentials for editing the text of an input line follows.
+
+'C-b'
+     Move back one character.
+'C-f'
+     Move forward one character.
+<DEL> or <Backspace>
+     Delete the character to the left of the cursor.
+'C-d'
+     Delete the character underneath the cursor.
+Printing characters
+     Insert the character into the line at the cursor.
+'C-_' or 'C-x C-u'
+     Undo the last editing command.  You can undo all the way back to an
+     empty line.
+
+(Depending on your configuration, the <Backspace> key be set to delete
+the character to the left of the cursor and the <DEL> key set to delete
+the character underneath the cursor, like 'C-d', rather than the
+character to the left of the cursor.)
+
+
+File: bash.info,  Node: Readline Movement Commands,  Next: Readline Killing Commands,  Prev: Readline Bare Essentials,  Up: Readline Interaction
+
+8.2.2 Readline Movement Commands
+--------------------------------
+
+The above table describes the most basic keystrokes that you need in
+order to do editing of the input line.  For your convenience, many other
+commands have been added in addition to 'C-b', 'C-f', 'C-d', and <DEL>.
+Here are some commands for moving more rapidly about the line.
+
+'C-a'
+     Move to the start of the line.
+'C-e'
+     Move to the end of the line.
+'M-f'
+     Move forward a word, where a word is composed of letters and
+     digits.
+'M-b'
+     Move backward a word.
+'C-l'
+     Clear the screen, reprinting the current line at the top.
+
+   Notice how 'C-f' moves forward a character, while 'M-f' moves forward
+a word.  It is a loose convention that control keystrokes operate on
+characters while meta keystrokes operate on words.
+
+
+File: bash.info,  Node: Readline Killing Commands,  Next: Readline Arguments,  Prev: Readline Movement Commands,  Up: Readline Interaction
+
+8.2.3 Readline Killing Commands
+-------------------------------
+
+"Killing" text means to delete the text from the line, but to save it
+away for later use, usually by "yanking" (re-inserting) it back into the
+line.  ('Cut' and 'paste' are more recent jargon for 'kill' and 'yank'.)
+
+   If the description for a command says that it 'kills' text, then you
+can be sure that you can get the text back in a different (or the same)
+place later.
+
+   When you use a kill command, the text is saved in a "kill-ring".  Any
+number of consecutive kills save all of the killed text together, so
+that when you yank it back, you get it all.  The kill ring is not line
+specific; the text that you killed on a previously typed line is
+available to be yanked back later, when you are typing another line.
+
+   Here is the list of commands for killing text.
+
+'C-k'
+     Kill the text from the current cursor position to the end of the
+     line.
+
+'M-d'
+     Kill from the cursor to the end of the current word, or, if between
+     words, to the end of the next word.  Word boundaries are the same
+     as those used by 'M-f'.
+
+'M-<DEL>'
+     Kill from the cursor the start of the current word, or, if between
+     words, to the start of the previous word.  Word boundaries are the
+     same as those used by 'M-b'.
+
+'C-w'
+     Kill from the cursor to the previous whitespace.  This is different
+     than 'M-<DEL>' because the word boundaries differ.
+
+   Here is how to "yank" the text back into the line.  Yanking means to
+copy the most-recently-killed text from the kill buffer.
+
+'C-y'
+     Yank the most recently killed text back into the buffer at the
+     cursor.
+
+'M-y'
+     Rotate the kill-ring, and yank the new top.  You can only do this
+     if the prior command is 'C-y' or 'M-y'.
+
+
+File: bash.info,  Node: Readline Arguments,  Next: Searching,  Prev: Readline Killing Commands,  Up: Readline Interaction
+
+8.2.4 Readline Arguments
+------------------------
+
+You can pass numeric arguments to Readline commands.  Sometimes the
+argument acts as a repeat count, other times it is the sign of the
+argument that is significant.  If you pass a negative argument to a
+command which normally acts in a forward direction, that command will
+act in a backward direction.  For example, to kill text back to the
+start of the line, you might type 'M-- C-k'.
+
+   The general way to pass numeric arguments to a command is to type
+meta digits before the command.  If the first 'digit' typed is a minus
+sign ('-'), then the sign of the argument will be negative.  Once you
+have typed one meta digit to get the argument started, you can type the
+remainder of the digits, and then the command.  For example, to give the
+'C-d' command an argument of 10, you could type 'M-1 0 C-d', which will
+delete the next ten characters on the input line.
+
+
+File: bash.info,  Node: Searching,  Prev: Readline Arguments,  Up: Readline Interaction
+
+8.2.5 Searching for Commands in the History
+-------------------------------------------
+
+Readline provides commands for searching through the command history
+(*note Bash History Facilities::) for lines containing a specified
+string.  There are two search modes: "incremental" and
+"non-incremental".
+
+   Incremental searches begin before the user has finished typing the
+search string.  As each character of the search string is typed,
+Readline displays the next entry from the history matching the string
+typed so far.  An incremental search requires only as many characters as
+needed to find the desired history entry.  To search backward in the
+history for a particular string, type 'C-r'.  Typing 'C-s' searches
+forward through the history.  The characters present in the value of the
+'isearch-terminators' variable are used to terminate an incremental
+search.  If that variable has not been assigned a value, the <ESC> and
+'C-J' characters will terminate an incremental search.  'C-g' will abort
+an incremental search and restore the original line.  When the search is
+terminated, the history entry containing the search string becomes the
+current line.
+
+   To find other matching entries in the history list, type 'C-r' or
+'C-s' as appropriate.  This will search backward or forward in the
+history for the next entry matching the search string typed so far.  Any
+other key sequence bound to a Readline command will terminate the search
+and execute that command.  For instance, a <RET> will terminate the
+search and accept the line, thereby executing the command from the
+history list.  A movement command will terminate the search, make the
+last line found the current line, and begin editing.
+
+   Readline remembers the last incremental search string.  If two 'C-r's
+are typed without any intervening characters defining a new search
+string, any remembered search string is used.
+
+   Non-incremental searches read the entire search string before
+starting to search for matching history lines.  The search string may be
+typed by the user or be part of the contents of the current line.
+
+
+File: bash.info,  Node: Readline Init File,  Next: Bindable Readline Commands,  Prev: Readline Interaction,  Up: Command Line Editing
+
+8.3 Readline Init File
+======================
+
+Although the Readline library comes with a set of Emacs-like keybindings
+installed by default, it is possible to use a different set of
+keybindings.  Any user can customize programs that use Readline by
+putting commands in an "inputrc" file, conventionally in his home
+directory.  The name of this file is taken from the value of the shell
+variable 'INPUTRC'.  If that variable is unset, the default is
+'~/.inputrc'.  If that file does not exist or cannot be read, the
+ultimate default is '/etc/inputrc'.  The 'bind' builtin command can also
+be used to set Readline keybindings and variables.  *Note Bash
+Builtins::.
+
+   When a program which uses the Readline library starts up, the init
+file is read, and the key bindings are set.
+
+   In addition, the 'C-x C-r' command re-reads this init file, thus
+incorporating any changes that you might have made to it.
+
+* Menu:
+
+* Readline Init File Syntax::	Syntax for the commands in the inputrc file.
+
+* Conditional Init Constructs::	Conditional key bindings in the inputrc file.
+
+* Sample Init File::		An example inputrc file.
+
+
+File: bash.info,  Node: Readline Init File Syntax,  Next: Conditional Init Constructs,  Up: Readline Init File
+
+8.3.1 Readline Init File Syntax
+-------------------------------
+
+There are only a few basic constructs allowed in the Readline init file.
+Blank lines are ignored.  Lines beginning with a '#' are comments.
+Lines beginning with a '$' indicate conditional constructs (*note
+Conditional Init Constructs::).  Other lines denote variable settings
+and key bindings.
+
+Variable Settings
+     You can modify the run-time behavior of Readline by altering the
+     values of variables in Readline using the 'set' command within the
+     init file.  The syntax is simple:
+
+          set VARIABLE VALUE
+
+     Here, for example, is how to change from the default Emacs-like key
+     binding to use 'vi' line editing commands:
+
+          set editing-mode vi
+
+     Variable names and values, where appropriate, are recognized
+     without regard to case.  Unrecognized variable names are ignored.
+
+     Boolean variables (those that can be set to on or off) are set to
+     on if the value is null or empty, ON (case-insensitive), or 1.  Any
+     other value results in the variable being set to off.
+
+     The 'bind -V' command lists the current Readline variable names and
+     values.  *Note Bash Builtins::.
+
+     A great deal of run-time behavior is changeable with the following
+     variables.
+
+     'bell-style'
+          Controls what happens when Readline wants to ring the terminal
+          bell.  If set to 'none', Readline never rings the bell.  If
+          set to 'visible', Readline uses a visible bell if one is
+          available.  If set to 'audible' (the default), Readline
+          attempts to ring the terminal's bell.
+
+     'bind-tty-special-chars'
+          If set to 'on' (the default), Readline attempts to bind the
+          control characters treated specially by the kernel's terminal
+          driver to their Readline equivalents.
+
+     'blink-matching-paren'
+          If set to 'on', Readline attempts to briefly move the cursor
+          to an opening parenthesis when a closing parenthesis is
+          inserted.  The default is 'off'.
+
+     'colored-completion-prefix'
+          If set to 'on', when listing completions, Readline displays
+          the common prefix of the set of possible completions using a
+          different color.  The color definitions are taken from the
+          value of the 'LS_COLORS' environment variable.  The default is
+          'off'.
+
+     'colored-stats'
+          If set to 'on', Readline displays possible completions using
+          different colors to indicate their file type.  The color
+          definitions are taken from the value of the 'LS_COLORS'
+          environment variable.  The default is 'off'.
+
+     'comment-begin'
+          The string to insert at the beginning of the line when the
+          'insert-comment' command is executed.  The default value is
+          '"#"'.
+
+     'completion-display-width'
+          The number of screen columns used to display possible matches
+          when performing completion.  The value is ignored if it is
+          less than 0 or greater than the terminal screen width.  A
+          value of 0 will cause matches to be displayed one per line.
+          The default value is -1.
+
+     'completion-ignore-case'
+          If set to 'on', Readline performs filename matching and
+          completion in a case-insensitive fashion.  The default value
+          is 'off'.
+
+     'completion-map-case'
+          If set to 'on', and COMPLETION-IGNORE-CASE is enabled,
+          Readline treats hyphens ('-') and underscores ('_') as
+          equivalent when performing case-insensitive filename matching
+          and completion.  The default value is 'off'.
+
+     'completion-prefix-display-length'
+          The length in characters of the common prefix of a list of
+          possible completions that is displayed without modification.
+          When set to a value greater than zero, common prefixes longer
+          than this value are replaced with an ellipsis when displaying
+          possible completions.
+
+     'completion-query-items'
+          The number of possible completions that determines when the
+          user is asked whether the list of possibilities should be
+          displayed.  If the number of possible completions is greater
+          than or equal to this value, Readline will ask whether or not
+          the user wishes to view them; otherwise, they are simply
+          listed.  This variable must be set to an integer value greater
+          than or equal to 0.  A negative value means Readline should
+          never ask.  The default limit is '100'.
+
+     'convert-meta'
+          If set to 'on', Readline will convert characters with the
+          eighth bit set to an ASCII key sequence by stripping the
+          eighth bit and prefixing an <ESC> character, converting them
+          to a meta-prefixed key sequence.  The default value is 'on',
+          but will be set to 'off' if the locale is one that contains
+          eight-bit characters.
+
+     'disable-completion'
+          If set to 'On', Readline will inhibit word completion.
+          Completion characters will be inserted into the line as if
+          they had been mapped to 'self-insert'.  The default is 'off'.
+
+     'echo-control-characters'
+          When set to 'on', on operating systems that indicate they
+          support it, readline echoes a character corresponding to a
+          signal generated from the keyboard.  The default is 'on'.
+
+     'editing-mode'
+          The 'editing-mode' variable controls which default set of key
+          bindings is used.  By default, Readline starts up in Emacs
+          editing mode, where the keystrokes are most similar to Emacs.
+          This variable can be set to either 'emacs' or 'vi'.
+
+     'emacs-mode-string'
+          If the SHOW-MODE-IN-PROMPT variable is enabled, this string is
+          displayed immediately before the last line of the primary
+          prompt when emacs editing mode is active.  The value is
+          expanded like a key binding, so the standard set of meta- and
+          control prefixes and backslash escape sequences is available.
+          Use the '\1' and '\2' escapes to begin and end sequences of
+          non-printing characters, which can be used to embed a terminal
+          control sequence into the mode string.  The default is '@'.
+
+     'enable-bracketed-paste'
+          When set to 'On', Readline will configure the terminal in a
+          way that will enable it to insert each paste into the editing
+          buffer as a single string of characters, instead of treating
+          each character as if it had been read from the keyboard.  This
+          can prevent pasted characters from being interpreted as
+          editing commands.  The default is 'On'.
+
+     'enable-keypad'
+          When set to 'on', Readline will try to enable the application
+          keypad when it is called.  Some systems need this to enable
+          the arrow keys.  The default is 'off'.
+
+     'enable-meta-key'
+          When set to 'on', Readline will try to enable any meta
+          modifier key the terminal claims to support when it is called.
+          On many terminals, the meta key is used to send eight-bit
+          characters.  The default is 'on'.
+
+     'expand-tilde'
+          If set to 'on', tilde expansion is performed when Readline
+          attempts word completion.  The default is 'off'.
+
+     'history-preserve-point'
+          If set to 'on', the history code attempts to place the point
+          (the current cursor position) at the same location on each
+          history line retrieved with 'previous-history' or
+          'next-history'.  The default is 'off'.
+
+     'history-size'
+          Set the maximum number of history entries saved in the history
+          list.  If set to zero, any existing history entries are
+          deleted and no new entries are saved.  If set to a value less
+          than zero, the number of history entries is not limited.  By
+          default, the number of history entries is not limited.  If an
+          attempt is made to set HISTORY-SIZE to a non-numeric value,
+          the maximum number of history entries will be set to 500.
+
+     'horizontal-scroll-mode'
+          This variable can be set to either 'on' or 'off'.  Setting it
+          to 'on' means that the text of the lines being edited will
+          scroll horizontally on a single screen line when they are
+          longer than the width of the screen, instead of wrapping onto
+          a new screen line.  This variable is automatically set to 'on'
+          for terminals of height 1.  By default, this variable is set
+          to 'off'.
+
+     'input-meta'
+          If set to 'on', Readline will enable eight-bit input (it will
+          not clear the eighth bit in the characters it reads),
+          regardless of what the terminal claims it can support.  The
+          default value is 'off', but Readline will set it to 'on' if
+          the locale contains eight-bit characters.  The name
+          'meta-flag' is a synonym for this variable.
+
+     'isearch-terminators'
+          The string of characters that should terminate an incremental
+          search without subsequently executing the character as a
+          command (*note Searching::).  If this variable has not been
+          given a value, the characters <ESC> and 'C-J' will terminate
+          an incremental search.
+
+     'keymap'
+          Sets Readline's idea of the current keymap for key binding
+          commands.  Built-in 'keymap' names are 'emacs',
+          'emacs-standard', 'emacs-meta', 'emacs-ctlx', 'vi', 'vi-move',
+          'vi-command', and 'vi-insert'.  'vi' is equivalent to
+          'vi-command' ('vi-move' is also a synonym); 'emacs' is
+          equivalent to 'emacs-standard'.  Applications may add
+          additional names.  The default value is 'emacs'.  The value of
+          the 'editing-mode' variable also affects the default keymap.
+
+     'keyseq-timeout'
+          Specifies the duration Readline will wait for a character when
+          reading an ambiguous key sequence (one that can form a
+          complete key sequence using the input read so far, or can take
+          additional input to complete a longer key sequence).  If no
+          input is received within the timeout, Readline will use the
+          shorter but complete key sequence.  Readline uses this value
+          to determine whether or not input is available on the current
+          input source ('rl_instream' by default).  The value is
+          specified in milliseconds, so a value of 1000 means that
+          Readline will wait one second for additional input.  If this
+          variable is set to a value less than or equal to zero, or to a
+          non-numeric value, Readline will wait until another key is
+          pressed to decide which key sequence to complete.  The default
+          value is '500'.
+
+     'mark-directories'
+          If set to 'on', completed directory names have a slash
+          appended.  The default is 'on'.
+
+     'mark-modified-lines'
+          This variable, when set to 'on', causes Readline to display an
+          asterisk ('*') at the start of history lines which have been
+          modified.  This variable is 'off' by default.
+
+     'mark-symlinked-directories'
+          If set to 'on', completed names which are symbolic links to
+          directories have a slash appended (subject to the value of
+          'mark-directories').  The default is 'off'.
+
+     'match-hidden-files'
+          This variable, when set to 'on', causes Readline to match
+          files whose names begin with a '.' (hidden files) when
+          performing filename completion.  If set to 'off', the leading
+          '.' must be supplied by the user in the filename to be
+          completed.  This variable is 'on' by default.
+
+     'menu-complete-display-prefix'
+          If set to 'on', menu completion displays the common prefix of
+          the list of possible completions (which may be empty) before
+          cycling through the list.  The default is 'off'.
+
+     'output-meta'
+          If set to 'on', Readline will display characters with the
+          eighth bit set directly rather than as a meta-prefixed escape
+          sequence.  The default is 'off', but Readline will set it to
+          'on' if the locale contains eight-bit characters.
+
+     'page-completions'
+          If set to 'on', Readline uses an internal 'more'-like pager to
+          display a screenful of possible completions at a time.  This
+          variable is 'on' by default.
+
+     'print-completions-horizontally'
+          If set to 'on', Readline will display completions with matches
+          sorted horizontally in alphabetical order, rather than down
+          the screen.  The default is 'off'.
+
+     'revert-all-at-newline'
+          If set to 'on', Readline will undo all changes to history
+          lines before returning when 'accept-line' is executed.  By
+          default, history lines may be modified and retain individual
+          undo lists across calls to 'readline'.  The default is 'off'.
+
+     'show-all-if-ambiguous'
+          This alters the default behavior of the completion functions.
+          If set to 'on', words which have more than one possible
+          completion cause the matches to be listed immediately instead
+          of ringing the bell.  The default value is 'off'.
+
+     'show-all-if-unmodified'
+          This alters the default behavior of the completion functions
+          in a fashion similar to SHOW-ALL-IF-AMBIGUOUS.  If set to
+          'on', words which have more than one possible completion
+          without any possible partial completion (the possible
+          completions don't share a common prefix) cause the matches to
+          be listed immediately instead of ringing the bell.  The
+          default value is 'off'.
+
+     'show-mode-in-prompt'
+          If set to 'on', add a string to the beginning of the prompt
+          indicating the editing mode: emacs, vi command, or vi
+          insertion.  The mode strings are user-settable (e.g.,
+          EMACS-MODE-STRING).  The default value is 'off'.
+
+     'skip-completed-text'
+          If set to 'on', this alters the default completion behavior
+          when inserting a single match into the line.  It's only active
+          when performing completion in the middle of a word.  If
+          enabled, readline does not insert characters from the
+          completion that match characters after point in the word being
+          completed, so portions of the word following the cursor are
+          not duplicated.  For instance, if this is enabled, attempting
+          completion when the cursor is after the 'e' in 'Makefile' will
+          result in 'Makefile' rather than 'Makefilefile', assuming
+          there is a single possible completion.  The default value is
+          'off'.
+
+     'vi-cmd-mode-string'
+          If the SHOW-MODE-IN-PROMPT variable is enabled, this string is
+          displayed immediately before the last line of the primary
+          prompt when vi editing mode is active and in command mode.
+          The value is expanded like a key binding, so the standard set
+          of meta- and control prefixes and backslash escape sequences
+          is available.  Use the '\1' and '\2' escapes to begin and end
+          sequences of non-printing characters, which can be used to
+          embed a terminal control sequence into the mode string.  The
+          default is '(cmd)'.
+
+     'vi-ins-mode-string'
+          If the SHOW-MODE-IN-PROMPT variable is enabled, this string is
+          displayed immediately before the last line of the primary
+          prompt when vi editing mode is active and in insertion mode.
+          The value is expanded like a key binding, so the standard set
+          of meta- and control prefixes and backslash escape sequences
+          is available.  Use the '\1' and '\2' escapes to begin and end
+          sequences of non-printing characters, which can be used to
+          embed a terminal control sequence into the mode string.  The
+          default is '(ins)'.
+
+     'visible-stats'
+          If set to 'on', a character denoting a file's type is appended
+          to the filename when listing possible completions.  The
+          default is 'off'.
+
+Key Bindings
+     The syntax for controlling key bindings in the init file is simple.
+     First you need to find the name of the command that you want to
+     change.  The following sections contain tables of the command name,
+     the default keybinding, if any, and a short description of what the
+     command does.
+
+     Once you know the name of the command, simply place on a line in
+     the init file the name of the key you wish to bind the command to,
+     a colon, and then the name of the command.  There can be no space
+     between the key name and the colon - that will be interpreted as
+     part of the key name.  The name of the key can be expressed in
+     different ways, depending on what you find most comfortable.
+
+     In addition to command names, readline allows keys to be bound to a
+     string that is inserted when the key is pressed (a MACRO).
+
+     The 'bind -p' command displays Readline function names and bindings
+     in a format that can put directly into an initialization file.
+     *Note Bash Builtins::.
+
+     KEYNAME: FUNCTION-NAME or MACRO
+          KEYNAME is the name of a key spelled out in English.  For
+          example:
+               Control-u: universal-argument
+               Meta-Rubout: backward-kill-word
+               Control-o: "> output"
+
+          In the example above, 'C-u' is bound to the function
+          'universal-argument', 'M-DEL' is bound to the function
+          'backward-kill-word', and 'C-o' is bound to run the macro
+          expressed on the right hand side (that is, to insert the text
+          '> output' into the line).
+
+          A number of symbolic character names are recognized while
+          processing this key binding syntax: DEL, ESC, ESCAPE, LFD,
+          NEWLINE, RET, RETURN, RUBOUT, SPACE, SPC, and TAB.
+
+     "KEYSEQ": FUNCTION-NAME or MACRO
+          KEYSEQ differs from KEYNAME above in that strings denoting an
+          entire key sequence can be specified, by placing the key
+          sequence in double quotes.  Some GNU Emacs style key escapes
+          can be used, as in the following example, but the special
+          character names are not recognized.
+
+               "\C-u": universal-argument
+               "\C-x\C-r": re-read-init-file
+               "\e[11~": "Function Key 1"
+
+          In the above example, 'C-u' is again bound to the function
+          'universal-argument' (just as it was in the first example),
+          ''C-x' 'C-r'' is bound to the function 're-read-init-file',
+          and '<ESC> <[> <1> <1> <~>' is bound to insert the text
+          'Function Key 1'.
+
+     The following GNU Emacs style escape sequences are available when
+     specifying key sequences:
+
+     '\C-'
+          control prefix
+     '\M-'
+          meta prefix
+     '\e'
+          an escape character
+     '\\'
+          backslash
+     '\"'
+          <">, a double quotation mark
+     '\''
+          <'>, a single quote or apostrophe
+
+     In addition to the GNU Emacs style escape sequences, a second set
+     of backslash escapes is available:
+
+     '\a'
+          alert (bell)
+     '\b'
+          backspace
+     '\d'
+          delete
+     '\f'
+          form feed
+     '\n'
+          newline
+     '\r'
+          carriage return
+     '\t'
+          horizontal tab
+     '\v'
+          vertical tab
+     '\NNN'
+          the eight-bit character whose value is the octal value NNN
+          (one to three digits)
+     '\xHH'
+          the eight-bit character whose value is the hexadecimal value
+          HH (one or two hex digits)
+
+     When entering the text of a macro, single or double quotes must be
+     used to indicate a macro definition.  Unquoted text is assumed to
+     be a function name.  In the macro body, the backslash escapes
+     described above are expanded.  Backslash will quote any other
+     character in the macro text, including '"' and '''.  For example,
+     the following binding will make ''C-x' \' insert a single '\' into
+     the line:
+          "\C-x\\": "\\"
+
+
+File: bash.info,  Node: Conditional Init Constructs,  Next: Sample Init File,  Prev: Readline Init File Syntax,  Up: Readline Init File
+
+8.3.2 Conditional Init Constructs
+---------------------------------
+
+Readline implements a facility similar in spirit to the conditional
+compilation features of the C preprocessor which allows key bindings and
+variable settings to be performed as the result of tests.  There are
+four parser directives used.
+
+'$if'
+     The '$if' construct allows bindings to be made based on the editing
+     mode, the terminal being used, or the application using Readline.
+     The text of the test, after any comparison operator, extends to the
+     end of the line; unless otherwise noted, no characters are required
+     to isolate it.
+
+     'mode'
+          The 'mode=' form of the '$if' directive is used to test
+          whether Readline is in 'emacs' or 'vi' mode.  This may be used
+          in conjunction with the 'set keymap' command, for instance, to
+          set bindings in the 'emacs-standard' and 'emacs-ctlx' keymaps
+          only if Readline is starting out in 'emacs' mode.
+
+     'term'
+          The 'term=' form may be used to include terminal-specific key
+          bindings, perhaps to bind the key sequences output by the
+          terminal's function keys.  The word on the right side of the
+          '=' is tested against both the full name of the terminal and
+          the portion of the terminal name before the first '-'.  This
+          allows 'sun' to match both 'sun' and 'sun-cmd', for instance.
+
+     'version'
+          The 'version' test may be used to perform comparisons against
+          specific Readline versions.  The 'version' expands to the
+          current Readline version.  The set of comparison operators
+          includes '=' (and '=='), '!=', '<=', '>=', '<', and '>'.  The
+          version number supplied on the right side of the operator
+          consists of a major version number, an optional decimal point,
+          and an optional minor version (e.g., '7.1').  If the minor
+          version is omitted, it is assumed to be '0'.  The operator may
+          be separated from the string 'version' and from the version
+          number argument by whitespace.  The following example sets a
+          variable if the Readline version being used is 7.0 or newer:
+               $if version >= 7.0
+               set show-mode-in-prompt on
+               $endif
+
+     'application'
+          The APPLICATION construct is used to include
+          application-specific settings.  Each program using the
+          Readline library sets the APPLICATION NAME, and you can test
+          for a particular value.  This could be used to bind key
+          sequences to functions useful for a specific program.  For
+          instance, the following command adds a key sequence that
+          quotes the current or previous word in Bash:
+               $if Bash
+               # Quote the current or previous word
+               "\C-xq": "\eb\"\ef\""
+               $endif
+
+     'variable'
+          The VARIABLE construct provides simple equality tests for
+          Readline variables and values.  The permitted comparison
+          operators are '=', '==', and '!='.  The variable name must be
+          separated from the comparison operator by whitespace; the
+          operator may be separated from the value on the right hand
+          side by whitespace.  Both string and boolean variables may be
+          tested.  Boolean variables must be tested against the values
+          ON and OFF.  The following example is equivalent to the
+          'mode=emacs' test described above:
+               $if editing-mode == emacs
+               set show-mode-in-prompt on
+               $endif
+
+'$endif'
+     This command, as seen in the previous example, terminates an '$if'
+     command.
+
+'$else'
+     Commands in this branch of the '$if' directive are executed if the
+     test fails.
+
+'$include'
+     This directive takes a single filename as an argument and reads
+     commands and bindings from that file.  For example, the following
+     directive reads from '/etc/inputrc':
+          $include /etc/inputrc
+
+
+File: bash.info,  Node: Sample Init File,  Prev: Conditional Init Constructs,  Up: Readline Init File
+
+8.3.3 Sample Init File
+----------------------
+
+Here is an example of an INPUTRC file.  This illustrates key binding,
+variable assignment, and conditional syntax.
+
+     # This file controls the behaviour of line input editing for
+     # programs that use the GNU Readline library.  Existing
+     # programs include FTP, Bash, and GDB.
+     #
+     # You can re-read the inputrc file with C-x C-r.
+     # Lines beginning with '#' are comments.
+     #
+     # First, include any system-wide bindings and variable
+     # assignments from /etc/Inputrc
+     $include /etc/Inputrc
+
+     #
+     # Set various bindings for emacs mode.
+
+     set editing-mode emacs
+
+     $if mode=emacs
+
+     Meta-Control-h:	backward-kill-word	Text after the function name is ignored
+
+     #
+     # Arrow keys in keypad mode
+     #
+     #"\M-OD":        backward-char
+     #"\M-OC":        forward-char
+     #"\M-OA":        previous-history
+     #"\M-OB":        next-history
+     #
+     # Arrow keys in ANSI mode
+     #
+     "\M-[D":        backward-char
+     "\M-[C":        forward-char
+     "\M-[A":        previous-history
+     "\M-[B":        next-history
+     #
+     # Arrow keys in 8 bit keypad mode
+     #
+     #"\M-\C-OD":       backward-char
+     #"\M-\C-OC":       forward-char
+     #"\M-\C-OA":       previous-history
+     #"\M-\C-OB":       next-history
+     #
+     # Arrow keys in 8 bit ANSI mode
+     #
+     #"\M-\C-[D":       backward-char
+     #"\M-\C-[C":       forward-char
+     #"\M-\C-[A":       previous-history
+     #"\M-\C-[B":       next-history
+
+     C-q: quoted-insert
+
+     $endif
+
+     # An old-style binding.  This happens to be the default.
+     TAB: complete
+
+     # Macros that are convenient for shell interaction
+     $if Bash
+     # edit the path
+     "\C-xp": "PATH=${PATH}\e\C-e\C-a\ef\C-f"
+     # prepare to type a quoted word --
+     # insert open and close double quotes
+     # and move to just after the open quote
+     "\C-x\"": "\"\"\C-b"
+     # insert a backslash (testing backslash escapes
+     # in sequences and macros)
+     "\C-x\\": "\\"
+     # Quote the current or previous word
+     "\C-xq": "\eb\"\ef\""
+     # Add a binding to refresh the line, which is unbound
+     "\C-xr": redraw-current-line
+     # Edit variable on current line.
+     "\M-\C-v": "\C-a\C-k$\C-y\M-\C-e\C-a\C-y="
+     $endif
+
+     # use a visible bell if one is available
+     set bell-style visible
+
+     # don't strip characters to 7 bits when reading
+     set input-meta on
+
+     # allow iso-latin1 characters to be inserted rather
+     # than converted to prefix-meta sequences
+     set convert-meta off
+
+     # display characters with the eighth bit set directly
+     # rather than as meta-prefixed characters
+     set output-meta on
+
+     # if there are 150 or more possible completions for a word,
+     # ask whether or not the user wants to see all of them
+     set completion-query-items 150
+
+     # For FTP
+     $if Ftp
+     "\C-xg": "get \M-?"
+     "\C-xt": "put \M-?"
+     "\M-.": yank-last-arg
+     $endif
+
+
+File: bash.info,  Node: Bindable Readline Commands,  Next: Readline vi Mode,  Prev: Readline Init File,  Up: Command Line Editing
+
+8.4 Bindable Readline Commands
+==============================
+
+* Menu:
+
+* Commands For Moving::		Moving about the line.
+* Commands For History::	Getting at previous lines.
+* Commands For Text::		Commands for changing text.
+* Commands For Killing::	Commands for killing and yanking.
+* Numeric Arguments::		Specifying numeric arguments, repeat counts.
+* Commands For Completion::	Getting Readline to do the typing for you.
+* Keyboard Macros::		Saving and re-executing typed characters
+* Miscellaneous Commands::	Other miscellaneous commands.
+
+This section describes Readline commands that may be bound to key
+sequences.  You can list your key bindings by executing 'bind -P' or,
+for a more terse format, suitable for an INPUTRC file, 'bind -p'.
+(*Note Bash Builtins::.)  Command names without an accompanying key
+sequence are unbound by default.
+
+   In the following descriptions, "point" refers to the current cursor
+position, and "mark" refers to a cursor position saved by the 'set-mark'
+command.  The text between the point and mark is referred to as the
+"region".
+
+
+File: bash.info,  Node: Commands For Moving,  Next: Commands For History,  Up: Bindable Readline Commands
+
+8.4.1 Commands For Moving
+-------------------------
+
+'beginning-of-line (C-a)'
+     Move to the start of the current line.
+
+'end-of-line (C-e)'
+     Move to the end of the line.
+
+'forward-char (C-f)'
+     Move forward a character.
+
+'backward-char (C-b)'
+     Move back a character.
+
+'forward-word (M-f)'
+     Move forward to the end of the next word.  Words are composed of
+     letters and digits.
+
+'backward-word (M-b)'
+     Move back to the start of the current or previous word.  Words are
+     composed of letters and digits.
+
+'shell-forward-word (M-C-f)'
+     Move forward to the end of the next word.  Words are delimited by
+     non-quoted shell metacharacters.
+
+'shell-backward-word (M-C-b)'
+     Move back to the start of the current or previous word.  Words are
+     delimited by non-quoted shell metacharacters.
+
+'previous-screen-line ()'
+     Attempt to move point to the same physical screen column on the
+     previous physical screen line.  This will not have the desired
+     effect if the current Readline line does not take up more than one
+     physical line or if point is not greater than the length of the
+     prompt plus the screen width.
+
+'next-screen-line ()'
+     Attempt to move point to the same physical screen column on the
+     next physical screen line.  This will not have the desired effect
+     if the current Readline line does not take up more than one
+     physical line or if the length of the current Readline line is not
+     greater than the length of the prompt plus the screen width.
+
+'clear-display (M-C-l)'
+     Clear the screen and, if possible, the terminal's scrollback
+     buffer, then redraw the current line, leaving the current line at
+     the top of the screen.
+
+'clear-screen (C-l)'
+     Clear the screen, then redraw the current line, leaving the current
+     line at the top of the screen.
+
+'redraw-current-line ()'
+     Refresh the current line.  By default, this is unbound.
+
+
+File: bash.info,  Node: Commands For History,  Next: Commands For Text,  Prev: Commands For Moving,  Up: Bindable Readline Commands
+
+8.4.2 Commands For Manipulating The History
+-------------------------------------------
+
+'accept-line (Newline or Return)'
+     Accept the line regardless of where the cursor is.  If this line is
+     non-empty, add it to the history list according to the setting of
+     the 'HISTCONTROL' and 'HISTIGNORE' variables.  If this line is a
+     modified history line, then restore the history line to its
+     original state.
+
+'previous-history (C-p)'
+     Move 'back' through the history list, fetching the previous
+     command.
+
+'next-history (C-n)'
+     Move 'forward' through the history list, fetching the next command.
+
+'beginning-of-history (M-<)'
+     Move to the first line in the history.
+
+'end-of-history (M->)'
+     Move to the end of the input history, i.e., the line currently
+     being entered.
+
+'reverse-search-history (C-r)'
+     Search backward starting at the current line and moving 'up'
+     through the history as necessary.  This is an incremental search.
+     This command sets the region to the matched text and activates the
+     mark.
+
+'forward-search-history (C-s)'
+     Search forward starting at the current line and moving 'down'
+     through the history as necessary.  This is an incremental search.
+     This command sets the region to the matched text and activates the
+     mark.
+
+'non-incremental-reverse-search-history (M-p)'
+     Search backward starting at the current line and moving 'up'
+     through the history as necessary using a non-incremental search for
+     a string supplied by the user.  The search string may match
+     anywhere in a history line.
+
+'non-incremental-forward-search-history (M-n)'
+     Search forward starting at the current line and moving 'down'
+     through the history as necessary using a non-incremental search for
+     a string supplied by the user.  The search string may match
+     anywhere in a history line.
+
+'history-search-forward ()'
+     Search forward through the history for the string of characters
+     between the start of the current line and the point.  The search
+     string must match at the beginning of a history line.  This is a
+     non-incremental search.  By default, this command is unbound.
+
+'history-search-backward ()'
+     Search backward through the history for the string of characters
+     between the start of the current line and the point.  The search
+     string must match at the beginning of a history line.  This is a
+     non-incremental search.  By default, this command is unbound.
+
+'history-substring-search-forward ()'
+     Search forward through the history for the string of characters
+     between the start of the current line and the point.  The search
+     string may match anywhere in a history line.  This is a
+     non-incremental search.  By default, this command is unbound.
+
+'history-substring-search-backward ()'
+     Search backward through the history for the string of characters
+     between the start of the current line and the point.  The search
+     string may match anywhere in a history line.  This is a
+     non-incremental search.  By default, this command is unbound.
+
+'yank-nth-arg (M-C-y)'
+     Insert the first argument to the previous command (usually the
+     second word on the previous line) at point.  With an argument N,
+     insert the Nth word from the previous command (the words in the
+     previous command begin with word 0).  A negative argument inserts
+     the Nth word from the end of the previous command.  Once the
+     argument N is computed, the argument is extracted as if the '!N'
+     history expansion had been specified.
+
+'yank-last-arg (M-. or M-_)'
+     Insert last argument to the previous command (the last word of the
+     previous history entry).  With a numeric argument, behave exactly
+     like 'yank-nth-arg'.  Successive calls to 'yank-last-arg' move back
+     through the history list, inserting the last word (or the word
+     specified by the argument to the first call) of each line in turn.
+     Any numeric argument supplied to these successive calls determines
+     the direction to move through the history.  A negative argument
+     switches the direction through the history (back or forward).  The
+     history expansion facilities are used to extract the last argument,
+     as if the '!$' history expansion had been specified.
+
+'operate-and-get-next (C-o)'
+     Accept the current line for return to the calling application as if
+     a newline had been entered, and fetch the next line relative to the
+     current line from the history for editing.  A numeric argument, if
+     supplied, specifies the history entry to use instead of the current
+     line.
+
+
+File: bash.info,  Node: Commands For Text,  Next: Commands For Killing,  Prev: Commands For History,  Up: Bindable Readline Commands
+
+8.4.3 Commands For Changing Text
+--------------------------------
+
+'end-of-file (usually C-d)'
+     The character indicating end-of-file as set, for example, by
+     'stty'.  If this character is read when there are no characters on
+     the line, and point is at the beginning of the line, Readline
+     interprets it as the end of input and returns EOF.
+
+'delete-char (C-d)'
+     Delete the character at point.  If this function is bound to the
+     same character as the tty EOF character, as 'C-d' commonly is, see
+     above for the effects.
+
+'backward-delete-char (Rubout)'
+     Delete the character behind the cursor.  A numeric argument means
+     to kill the characters instead of deleting them.
+
+'forward-backward-delete-char ()'
+     Delete the character under the cursor, unless the cursor is at the
+     end of the line, in which case the character behind the cursor is
+     deleted.  By default, this is not bound to a key.
+
+'quoted-insert (C-q or C-v)'
+     Add the next character typed to the line verbatim.  This is how to
+     insert key sequences like 'C-q', for example.
+
+'self-insert (a, b, A, 1, !, ...)'
+     Insert yourself.
+
+'bracketed-paste-begin ()'
+     This function is intended to be bound to the "bracketed paste"
+     escape sequence sent by some terminals, and such a binding is
+     assigned by default.  It allows Readline to insert the pasted text
+     as a single unit without treating each character as if it had been
+     read from the keyboard.  The characters are inserted as if each one
+     was bound to 'self-insert' instead of executing any editing
+     commands.
+
+     Bracketed paste sets the region (the characters between point and
+     the mark) to the inserted text.  It uses the concept of an _active
+     mark_: when the mark is active, Readline redisplay uses the
+     terminal's standout mode to denote the region.
+
+'transpose-chars (C-t)'
+     Drag the character before the cursor forward over the character at
+     the cursor, moving the cursor forward as well.  If the insertion
+     point is at the end of the line, then this transposes the last two
+     characters of the line.  Negative arguments have no effect.
+
+'transpose-words (M-t)'
+     Drag the word before point past the word after point, moving point
+     past that word as well.  If the insertion point is at the end of
+     the line, this transposes the last two words on the line.
+
+'upcase-word (M-u)'
+     Uppercase the current (or following) word.  With a negative
+     argument, uppercase the previous word, but do not move the cursor.
+
+'downcase-word (M-l)'
+     Lowercase the current (or following) word.  With a negative
+     argument, lowercase the previous word, but do not move the cursor.
+
+'capitalize-word (M-c)'
+     Capitalize the current (or following) word.  With a negative
+     argument, capitalize the previous word, but do not move the cursor.
+
+'overwrite-mode ()'
+     Toggle overwrite mode.  With an explicit positive numeric argument,
+     switches to overwrite mode.  With an explicit non-positive numeric
+     argument, switches to insert mode.  This command affects only
+     'emacs' mode; 'vi' mode does overwrite differently.  Each call to
+     'readline()' starts in insert mode.
+
+     In overwrite mode, characters bound to 'self-insert' replace the
+     text at point rather than pushing the text to the right.
+     Characters bound to 'backward-delete-char' replace the character
+     before point with a space.
+
+     By default, this command is unbound.
+
+
+File: bash.info,  Node: Commands For Killing,  Next: Numeric Arguments,  Prev: Commands For Text,  Up: Bindable Readline Commands
+
+8.4.4 Killing And Yanking
+-------------------------
+
+'kill-line (C-k)'
+     Kill the text from point to the end of the line.  With a negative
+     numeric argument, kill backward from the cursor to the beginning of
+     the current line.
+
+'backward-kill-line (C-x Rubout)'
+     Kill backward from the cursor to the beginning of the current line.
+     With a negative numeric argument, kill forward from the cursor to
+     the end of the current line.
+
+'unix-line-discard (C-u)'
+     Kill backward from the cursor to the beginning of the current line.
+
+'kill-whole-line ()'
+     Kill all characters on the current line, no matter where point is.
+     By default, this is unbound.
+
+'kill-word (M-d)'
+     Kill from point to the end of the current word, or if between
+     words, to the end of the next word.  Word boundaries are the same
+     as 'forward-word'.
+
+'backward-kill-word (M-<DEL>)'
+     Kill the word behind point.  Word boundaries are the same as
+     'backward-word'.
+
+'shell-kill-word (M-C-d)'
+     Kill from point to the end of the current word, or if between
+     words, to the end of the next word.  Word boundaries are the same
+     as 'shell-forward-word'.
+
+'shell-backward-kill-word ()'
+     Kill the word behind point.  Word boundaries are the same as
+     'shell-backward-word'.
+
+'shell-transpose-words (M-C-t)'
+     Drag the word before point past the word after point, moving point
+     past that word as well.  If the insertion point is at the end of
+     the line, this transposes the last two words on the line.  Word
+     boundaries are the same as 'shell-forward-word' and
+     'shell-backward-word'.
+
+'unix-word-rubout (C-w)'
+     Kill the word behind point, using white space as a word boundary.
+     The killed text is saved on the kill-ring.
+
+'unix-filename-rubout ()'
+     Kill the word behind point, using white space and the slash
+     character as the word boundaries.  The killed text is saved on the
+     kill-ring.
+
+'delete-horizontal-space ()'
+     Delete all spaces and tabs around point.  By default, this is
+     unbound.
+
+'kill-region ()'
+     Kill the text in the current region.  By default, this command is
+     unbound.
+
+'copy-region-as-kill ()'
+     Copy the text in the region to the kill buffer, so it can be yanked
+     right away.  By default, this command is unbound.
+
+'copy-backward-word ()'
+     Copy the word before point to the kill buffer.  The word boundaries
+     are the same as 'backward-word'.  By default, this command is
+     unbound.
+
+'copy-forward-word ()'
+     Copy the word following point to the kill buffer.  The word
+     boundaries are the same as 'forward-word'.  By default, this
+     command is unbound.
+
+'yank (C-y)'
+     Yank the top of the kill ring into the buffer at point.
+
+'yank-pop (M-y)'
+     Rotate the kill-ring, and yank the new top.  You can only do this
+     if the prior command is 'yank' or 'yank-pop'.
+
+
+File: bash.info,  Node: Numeric Arguments,  Next: Commands For Completion,  Prev: Commands For Killing,  Up: Bindable Readline Commands
+
+8.4.5 Specifying Numeric Arguments
+----------------------------------
+
+'digit-argument (M-0, M-1, ... M--)'
+     Add this digit to the argument already accumulating, or start a new
+     argument.  'M--' starts a negative argument.
+
+'universal-argument ()'
+     This is another way to specify an argument.  If this command is
+     followed by one or more digits, optionally with a leading minus
+     sign, those digits define the argument.  If the command is followed
+     by digits, executing 'universal-argument' again ends the numeric
+     argument, but is otherwise ignored.  As a special case, if this
+     command is immediately followed by a character that is neither a
+     digit nor minus sign, the argument count for the next command is
+     multiplied by four.  The argument count is initially one, so
+     executing this function the first time makes the argument count
+     four, a second time makes the argument count sixteen, and so on.
+     By default, this is not bound to a key.
+
+
+File: bash.info,  Node: Commands For Completion,  Next: Keyboard Macros,  Prev: Numeric Arguments,  Up: Bindable Readline Commands
+
+8.4.6 Letting Readline Type For You
+-----------------------------------
+
+'complete (<TAB>)'
+     Attempt to perform completion on the text before point.  The actual
+     completion performed is application-specific.  Bash attempts
+     completion treating the text as a variable (if the text begins with
+     '$'), username (if the text begins with '~'), hostname (if the text
+     begins with '@'), or command (including aliases and functions) in
+     turn.  If none of these produces a match, filename completion is
+     attempted.
+
+'possible-completions (M-?)'
+     List the possible completions of the text before point.  When
+     displaying completions, Readline sets the number of columns used
+     for display to the value of 'completion-display-width', the value
+     of the environment variable 'COLUMNS', or the screen width, in that
+     order.
+
+'insert-completions (M-*)'
+     Insert all completions of the text before point that would have
+     been generated by 'possible-completions'.
+
+'menu-complete ()'
+     Similar to 'complete', but replaces the word to be completed with a
+     single match from the list of possible completions.  Repeated
+     execution of 'menu-complete' steps through the list of possible
+     completions, inserting each match in turn.  At the end of the list
+     of completions, the bell is rung (subject to the setting of
+     'bell-style') and the original text is restored.  An argument of N
+     moves N positions forward in the list of matches; a negative
+     argument may be used to move backward through the list.  This
+     command is intended to be bound to <TAB>, but is unbound by
+     default.
+
+'menu-complete-backward ()'
+     Identical to 'menu-complete', but moves backward through the list
+     of possible completions, as if 'menu-complete' had been given a
+     negative argument.
+
+'delete-char-or-list ()'
+     Deletes the character under the cursor if not at the beginning or
+     end of the line (like 'delete-char').  If at the end of the line,
+     behaves identically to 'possible-completions'.  This command is
+     unbound by default.
+
+'complete-filename (M-/)'
+     Attempt filename completion on the text before point.
+
+'possible-filename-completions (C-x /)'
+     List the possible completions of the text before point, treating it
+     as a filename.
+
+'complete-username (M-~)'
+     Attempt completion on the text before point, treating it as a
+     username.
+
+'possible-username-completions (C-x ~)'
+     List the possible completions of the text before point, treating it
+     as a username.
+
+'complete-variable (M-$)'
+     Attempt completion on the text before point, treating it as a shell
+     variable.
+
+'possible-variable-completions (C-x $)'
+     List the possible completions of the text before point, treating it
+     as a shell variable.
+
+'complete-hostname (M-@)'
+     Attempt completion on the text before point, treating it as a
+     hostname.
+
+'possible-hostname-completions (C-x @)'
+     List the possible completions of the text before point, treating it
+     as a hostname.
+
+'complete-command (M-!)'
+     Attempt completion on the text before point, treating it as a
+     command name.  Command completion attempts to match the text
+     against aliases, reserved words, shell functions, shell builtins,
+     and finally executable filenames, in that order.
+
+'possible-command-completions (C-x !)'
+     List the possible completions of the text before point, treating it
+     as a command name.
+
+'dynamic-complete-history (M-<TAB>)'
+     Attempt completion on the text before point, comparing the text
+     against lines from the history list for possible completion
+     matches.
+
+'dabbrev-expand ()'
+     Attempt menu completion on the text before point, comparing the
+     text against lines from the history list for possible completion
+     matches.
+
+'complete-into-braces (M-{)'
+     Perform filename completion and insert the list of possible
+     completions enclosed within braces so the list is available to the
+     shell (*note Brace Expansion::).
+
+
+File: bash.info,  Node: Keyboard Macros,  Next: Miscellaneous Commands,  Prev: Commands For Completion,  Up: Bindable Readline Commands
+
+8.4.7 Keyboard Macros
+---------------------
+
+'start-kbd-macro (C-x ()'
+     Begin saving the characters typed into the current keyboard macro.
+
+'end-kbd-macro (C-x ))'
+     Stop saving the characters typed into the current keyboard macro
+     and save the definition.
+
+'call-last-kbd-macro (C-x e)'
+     Re-execute the last keyboard macro defined, by making the
+     characters in the macro appear as if typed at the keyboard.
+
+'print-last-kbd-macro ()'
+     Print the last keboard macro defined in a format suitable for the
+     INPUTRC file.
+
+
+File: bash.info,  Node: Miscellaneous Commands,  Prev: Keyboard Macros,  Up: Bindable Readline Commands
+
+8.4.8 Some Miscellaneous Commands
+---------------------------------
+
+'re-read-init-file (C-x C-r)'
+     Read in the contents of the INPUTRC file, and incorporate any
+     bindings or variable assignments found there.
+
+'abort (C-g)'
+     Abort the current editing command and ring the terminal's bell
+     (subject to the setting of 'bell-style').
+
+'do-lowercase-version (M-A, M-B, M-X, ...)'
+     If the metafied character X is upper case, run the command that is
+     bound to the corresponding metafied lower case character.  The
+     behavior is undefined if X is already lower case.
+
+'prefix-meta (<ESC>)'
+     Metafy the next character typed.  This is for keyboards without a
+     meta key.  Typing '<ESC> f' is equivalent to typing 'M-f'.
+
+'undo (C-_ or C-x C-u)'
+     Incremental undo, separately remembered for each line.
+
+'revert-line (M-r)'
+     Undo all changes made to this line.  This is like executing the
+     'undo' command enough times to get back to the beginning.
+
+'tilde-expand (M-&)'
+     Perform tilde expansion on the current word.
+
+'set-mark (C-@)'
+     Set the mark to the point.  If a numeric argument is supplied, the
+     mark is set to that position.
+
+'exchange-point-and-mark (C-x C-x)'
+     Swap the point with the mark.  The current cursor position is set
+     to the saved position, and the old cursor position is saved as the
+     mark.
+
+'character-search (C-])'
+     A character is read and point is moved to the next occurrence of
+     that character.  A negative count searches for previous
+     occurrences.
+
+'character-search-backward (M-C-])'
+     A character is read and point is moved to the previous occurrence
+     of that character.  A negative count searches for subsequent
+     occurrences.
+
+'skip-csi-sequence ()'
+     Read enough characters to consume a multi-key sequence such as
+     those defined for keys like Home and End.  Such sequences begin
+     with a Control Sequence Indicator (CSI), usually ESC-[.  If this
+     sequence is bound to "\e[", keys producing such sequences will have
+     no effect unless explicitly bound to a readline command, instead of
+     inserting stray characters into the editing buffer.  This is
+     unbound by default, but usually bound to ESC-[.
+
+'insert-comment (M-#)'
+     Without a numeric argument, the value of the 'comment-begin'
+     variable is inserted at the beginning of the current line.  If a
+     numeric argument is supplied, this command acts as a toggle: if the
+     characters at the beginning of the line do not match the value of
+     'comment-begin', the value is inserted, otherwise the characters in
+     'comment-begin' are deleted from the beginning of the line.  In
+     either case, the line is accepted as if a newline had been typed.
+     The default value of 'comment-begin' causes this command to make
+     the current line a shell comment.  If a numeric argument causes the
+     comment character to be removed, the line will be executed by the
+     shell.
+
+'dump-functions ()'
+     Print all of the functions and their key bindings to the Readline
+     output stream.  If a numeric argument is supplied, the output is
+     formatted in such a way that it can be made part of an INPUTRC
+     file.  This command is unbound by default.
+
+'dump-variables ()'
+     Print all of the settable variables and their values to the
+     Readline output stream.  If a numeric argument is supplied, the
+     output is formatted in such a way that it can be made part of an
+     INPUTRC file.  This command is unbound by default.
+
+'dump-macros ()'
+     Print all of the Readline key sequences bound to macros and the
+     strings they output.  If a numeric argument is supplied, the output
+     is formatted in such a way that it can be made part of an INPUTRC
+     file.  This command is unbound by default.
+
+'glob-complete-word (M-g)'
+     The word before point is treated as a pattern for pathname
+     expansion, with an asterisk implicitly appended.  This pattern is
+     used to generate a list of matching file names for possible
+     completions.
+
+'glob-expand-word (C-x *)'
+     The word before point is treated as a pattern for pathname
+     expansion, and the list of matching file names is inserted,
+     replacing the word.  If a numeric argument is supplied, a '*' is
+     appended before pathname expansion.
+
+'glob-list-expansions (C-x g)'
+     The list of expansions that would have been generated by
+     'glob-expand-word' is displayed, and the line is redrawn.  If a
+     numeric argument is supplied, a '*' is appended before pathname
+     expansion.
+
+'display-shell-version (C-x C-v)'
+     Display version information about the current instance of Bash.
+
+'shell-expand-line (M-C-e)'
+     Expand the line as the shell does.  This performs alias and history
+     expansion as well as all of the shell word expansions (*note Shell
+     Expansions::).
+
+'history-expand-line (M-^)'
+     Perform history expansion on the current line.
+
+'magic-space ()'
+     Perform history expansion on the current line and insert a space
+     (*note History Interaction::).
+
+'alias-expand-line ()'
+     Perform alias expansion on the current line (*note Aliases::).
+
+'history-and-alias-expand-line ()'
+     Perform history and alias expansion on the current line.
+
+'insert-last-argument (M-. or M-_)'
+     A synonym for 'yank-last-arg'.
+
+'edit-and-execute-command (C-x C-e)'
+     Invoke an editor on the current command line, and execute the
+     result as shell commands.  Bash attempts to invoke '$VISUAL',
+     '$EDITOR', and 'emacs' as the editor, in that order.
+
+
+File: bash.info,  Node: Readline vi Mode,  Next: Programmable Completion,  Prev: Bindable Readline Commands,  Up: Command Line Editing
+
+8.5 Readline vi Mode
+====================
+
+While the Readline library does not have a full set of 'vi' editing
+functions, it does contain enough to allow simple editing of the line.
+The Readline 'vi' mode behaves as specified in the POSIX standard.
+
+   In order to switch interactively between 'emacs' and 'vi' editing
+modes, use the 'set -o emacs' and 'set -o vi' commands (*note The Set
+Builtin::).  The Readline default is 'emacs' mode.
+
+   When you enter a line in 'vi' mode, you are already placed in
+'insertion' mode, as if you had typed an 'i'.  Pressing <ESC> switches
+you into 'command' mode, where you can edit the text of the line with
+the standard 'vi' movement keys, move to previous history lines with 'k'
+and subsequent lines with 'j', and so forth.
+
+
+File: bash.info,  Node: Programmable Completion,  Next: Programmable Completion Builtins,  Prev: Readline vi Mode,  Up: Command Line Editing
+
+8.6 Programmable Completion
+===========================
+
+When word completion is attempted for an argument to a command for which
+a completion specification (a COMPSPEC) has been defined using the
+'complete' builtin (*note Programmable Completion Builtins::), the
+programmable completion facilities are invoked.
+
+   First, the command name is identified.  If a compspec has been
+defined for that command, the compspec is used to generate the list of
+possible completions for the word.  If the command word is the empty
+string (completion attempted at the beginning of an empty line), any
+compspec defined with the '-E' option to 'complete' is used.  If the
+command word is a full pathname, a compspec for the full pathname is
+searched for first.  If no compspec is found for the full pathname, an
+attempt is made to find a compspec for the portion following the final
+slash.  If those searches do not result in a compspec, any compspec
+defined with the '-D' option to 'complete' is used as the default.  If
+there is no default compspec, Bash attempts alias expansion on the
+command word as a final resort, and attempts to find a compspec for the
+command word from any successful expansion
+
+   Once a compspec has been found, it is used to generate the list of
+matching words.  If a compspec is not found, the default Bash completion
+described above (*note Commands For Completion::) is performed.
+
+   First, the actions specified by the compspec are used.  Only matches
+which are prefixed by the word being completed are returned.  When the
+'-f' or '-d' option is used for filename or directory name completion,
+the shell variable 'FIGNORE' is used to filter the matches.  *Note Bash
+Variables::, for a description of 'FIGNORE'.
+
+   Any completions specified by a filename expansion pattern to the '-G'
+option are generated next.  The words generated by the pattern need not
+match the word being completed.  The 'GLOBIGNORE' shell variable is not
+used to filter the matches, but the 'FIGNORE' shell variable is used.
+
+   Next, the string specified as the argument to the '-W' option is
+considered.  The string is first split using the characters in the 'IFS'
+special variable as delimiters.  Shell quoting is honored within the
+string, in order to provide a mechanism for the words to contain shell
+metacharacters or characters in the value of 'IFS'.  Each word is then
+expanded using brace expansion, tilde expansion, parameter and variable
+expansion, command substitution, and arithmetic expansion, as described
+above (*note Shell Expansions::).  The results are split using the rules
+described above (*note Word Splitting::).  The results of the expansion
+are prefix-matched against the word being completed, and the matching
+words become the possible completions.
+
+   After these matches have been generated, any shell function or
+command specified with the '-F' and '-C' options is invoked.  When the
+command or function is invoked, the 'COMP_LINE', 'COMP_POINT',
+'COMP_KEY', and 'COMP_TYPE' variables are assigned values as described
+above (*note Bash Variables::).  If a shell function is being invoked,
+the 'COMP_WORDS' and 'COMP_CWORD' variables are also set.  When the
+function or command is invoked, the first argument ($1) is the name of
+the command whose arguments are being completed, the second argument
+($2) is the word being completed, and the third argument ($3) is the
+word preceding the word being completed on the current command line.  No
+filtering of the generated completions against the word being completed
+is performed; the function or command has complete freedom in generating
+the matches.
+
+   Any function specified with '-F' is invoked first.  The function may
+use any of the shell facilities, including the 'compgen' and 'compopt'
+builtins described below (*note Programmable Completion Builtins::), to
+generate the matches.  It must put the possible completions in the
+'COMPREPLY' array variable, one per array element.
+
+   Next, any command specified with the '-C' option is invoked in an
+environment equivalent to command substitution.  It should print a list
+of completions, one per line, to the standard output.  Backslash may be
+used to escape a newline, if necessary.
+
+   After all of the possible completions are generated, any filter
+specified with the '-X' option is applied to the list.  The filter is a
+pattern as used for pathname expansion; a '&' in the pattern is replaced
+with the text of the word being completed.  A literal '&' may be escaped
+with a backslash; the backslash is removed before attempting a match.
+Any completion that matches the pattern will be removed from the list.
+A leading '!' negates the pattern; in this case any completion not
+matching the pattern will be removed.  If the 'nocasematch' shell option
+(see the description of 'shopt' in *note The Shopt Builtin::) is
+enabled, the match is performed without regard to the case of alphabetic
+characters.
+
+   Finally, any prefix and suffix specified with the '-P' and '-S'
+options are added to each member of the completion list, and the result
+is returned to the Readline completion code as the list of possible
+completions.
+
+   If the previously-applied actions do not generate any matches, and
+the '-o dirnames' option was supplied to 'complete' when the compspec
+was defined, directory name completion is attempted.
+
+   If the '-o plusdirs' option was supplied to 'complete' when the
+compspec was defined, directory name completion is attempted and any
+matches are added to the results of the other actions.
+
+   By default, if a compspec is found, whatever it generates is returned
+to the completion code as the full set of possible completions.  The
+default Bash completions are not attempted, and the Readline default of
+filename completion is disabled.  If the '-o bashdefault' option was
+supplied to 'complete' when the compspec was defined, the default Bash
+completions are attempted if the compspec generates no matches.  If the
+'-o default' option was supplied to 'complete' when the compspec was
+defined, Readline's default completion will be performed if the compspec
+(and, if attempted, the default Bash completions) generate no matches.
+
+   When a compspec indicates that directory name completion is desired,
+the programmable completion functions force Readline to append a slash
+to completed names which are symbolic links to directories, subject to
+the value of the MARK-DIRECTORIES Readline variable, regardless of the
+setting of the MARK-SYMLINKED-DIRECTORIES Readline variable.
+
+   There is some support for dynamically modifying completions.  This is
+most useful when used in combination with a default completion specified
+with '-D'.  It's possible for shell functions executed as completion
+handlers to indicate that completion should be retried by returning an
+exit status of 124.  If a shell function returns 124, and changes the
+compspec associated with the command on which completion is being
+attempted (supplied as the first argument when the function is
+executed), programmable completion restarts from the beginning, with an
+attempt to find a new compspec for that command.  This allows a set of
+completions to be built dynamically as completion is attempted, rather
+than being loaded all at once.
+
+   For instance, assuming that there is a library of compspecs, each
+kept in a file corresponding to the name of the command, the following
+default completion function would load completions dynamically:
+
+     _completion_loader()
+     {
+         . "/etc/bash_completion.d/$1.sh" >/dev/null 2>&1 && return 124
+     }
+     complete -D -F _completion_loader -o bashdefault -o default
+
+
+File: bash.info,  Node: Programmable Completion Builtins,  Next: A Programmable Completion Example,  Prev: Programmable Completion,  Up: Command Line Editing
+
+8.7 Programmable Completion Builtins
+====================================
+
+Three builtin commands are available to manipulate the programmable
+completion facilities: one to specify how the arguments to a particular
+command are to be completed, and two to modify the completion as it is
+happening.
+
+'compgen'
+          compgen [OPTION] [WORD]
+
+     Generate possible completion matches for WORD according to the
+     OPTIONs, which may be any option accepted by the 'complete' builtin
+     with the exception of '-p' and '-r', and write the matches to the
+     standard output.  When using the '-F' or '-C' options, the various
+     shell variables set by the programmable completion facilities,
+     while available, will not have useful values.
+
+     The matches will be generated in the same way as if the
+     programmable completion code had generated them directly from a
+     completion specification with the same flags.  If WORD is
+     specified, only those completions matching WORD will be displayed.
+
+     The return value is true unless an invalid option is supplied, or
+     no matches were generated.
+
+'complete'
+          complete [-abcdefgjksuv] [-o COMP-OPTION] [-DEI] [-A ACTION] [-G GLOBPAT]
+          [-W WORDLIST] [-F FUNCTION] [-C COMMAND] [-X FILTERPAT]
+          [-P PREFIX] [-S SUFFIX] NAME [NAME ...]
+          complete -pr [-DEI] [NAME ...]
+
+     Specify how arguments to each NAME should be completed.  If the
+     '-p' option is supplied, or if no options are supplied, existing
+     completion specifications are printed in a way that allows them to
+     be reused as input.  The '-r' option removes a completion
+     specification for each NAME, or, if no NAMEs are supplied, all
+     completion specifications.  The '-D' option indicates that other
+     supplied options and actions should apply to the "default" command
+     completion; that is, completion attempted on a command for which no
+     completion has previously been defined.  The '-E' option indicates
+     that other supplied options and actions should apply to "empty"
+     command completion; that is, completion attempted on a blank line.
+     The '-I' option indicates that other supplied options and actions
+     should apply to completion on the initial non-assignment word on
+     the line, or after a command delimiter such as ';' or '|', which is
+     usually command name completion.  If multiple options are supplied,
+     the '-D' option takes precedence over '-E', and both take
+     precedence over '-I'.  If any of '-D', '-E', or '-I' are supplied,
+     any other NAME arguments are ignored; these completions only apply
+     to the case specified by the option.
+
+     The process of applying these completion specifications when word
+     completion is attempted is described above (*note Programmable
+     Completion::).
+
+     Other options, if specified, have the following meanings.  The
+     arguments to the '-G', '-W', and '-X' options (and, if necessary,
+     the '-P' and '-S' options) should be quoted to protect them from
+     expansion before the 'complete' builtin is invoked.
+
+     '-o COMP-OPTION'
+          The COMP-OPTION controls several aspects of the compspec's
+          behavior beyond the simple generation of completions.
+          COMP-OPTION may be one of:
+
+          'bashdefault'
+               Perform the rest of the default Bash completions if the
+               compspec generates no matches.
+
+          'default'
+               Use Readline's default filename completion if the
+               compspec generates no matches.
+
+          'dirnames'
+               Perform directory name completion if the compspec
+               generates no matches.
+
+          'filenames'
+               Tell Readline that the compspec generates filenames, so
+               it can perform any filename-specific processing (like
+               adding a slash to directory names, quoting special
+               characters, or suppressing trailing spaces).  This option
+               is intended to be used with shell functions specified
+               with '-F'.
+
+          'noquote'
+               Tell Readline not to quote the completed words if they
+               are filenames (quoting filenames is the default).
+
+          'nosort'
+               Tell Readline not to sort the list of possible
+               completions alphabetically.
+
+          'nospace'
+               Tell Readline not to append a space (the default) to
+               words completed at the end of the line.
+
+          'plusdirs'
+               After any matches defined by the compspec are generated,
+               directory name completion is attempted and any matches
+               are added to the results of the other actions.
+
+     '-A ACTION'
+          The ACTION may be one of the following to generate a list of
+          possible completions:
+
+          'alias'
+               Alias names.  May also be specified as '-a'.
+
+          'arrayvar'
+               Array variable names.
+
+          'binding'
+               Readline key binding names (*note Bindable Readline
+               Commands::).
+
+          'builtin'
+               Names of shell builtin commands.  May also be specified
+               as '-b'.
+
+          'command'
+               Command names.  May also be specified as '-c'.
+
+          'directory'
+               Directory names.  May also be specified as '-d'.
+
+          'disabled'
+               Names of disabled shell builtins.
+
+          'enabled'
+               Names of enabled shell builtins.
+
+          'export'
+               Names of exported shell variables.  May also be specified
+               as '-e'.
+
+          'file'
+               File names.  May also be specified as '-f'.
+
+          'function'
+               Names of shell functions.
+
+          'group'
+               Group names.  May also be specified as '-g'.
+
+          'helptopic'
+               Help topics as accepted by the 'help' builtin (*note Bash
+               Builtins::).
+
+          'hostname'
+               Hostnames, as taken from the file specified by the
+               'HOSTFILE' shell variable (*note Bash Variables::).
+
+          'job'
+               Job names, if job control is active.  May also be
+               specified as '-j'.
+
+          'keyword'
+               Shell reserved words.  May also be specified as '-k'.
+
+          'running'
+               Names of running jobs, if job control is active.
+
+          'service'
+               Service names.  May also be specified as '-s'.
+
+          'setopt'
+               Valid arguments for the '-o' option to the 'set' builtin
+               (*note The Set Builtin::).
+
+          'shopt'
+               Shell option names as accepted by the 'shopt' builtin
+               (*note Bash Builtins::).
+
+          'signal'
+               Signal names.
+
+          'stopped'
+               Names of stopped jobs, if job control is active.
+
+          'user'
+               User names.  May also be specified as '-u'.
+
+          'variable'
+               Names of all shell variables.  May also be specified as
+               '-v'.
+
+     '-C COMMAND'
+          COMMAND is executed in a subshell environment, and its output
+          is used as the possible completions.
+
+     '-F FUNCTION'
+          The shell function FUNCTION is executed in the current shell
+          environment.  When it is executed, $1 is the name of the
+          command whose arguments are being completed, $2 is the word
+          being completed, and $3 is the word preceding the word being
+          completed, as described above (*note Programmable
+          Completion::).  When it finishes, the possible completions are
+          retrieved from the value of the 'COMPREPLY' array variable.
+
+     '-G GLOBPAT'
+          The filename expansion pattern GLOBPAT is expanded to generate
+          the possible completions.
+
+     '-P PREFIX'
+          PREFIX is added at the beginning of each possible completion
+          after all other options have been applied.
+
+     '-S SUFFIX'
+          SUFFIX is appended to each possible completion after all other
+          options have been applied.
+
+     '-W WORDLIST'
+          The WORDLIST is split using the characters in the 'IFS'
+          special variable as delimiters, and each resultant word is
+          expanded.  The possible completions are the members of the
+          resultant list which match the word being completed.
+
+     '-X FILTERPAT'
+          FILTERPAT is a pattern as used for filename expansion.  It is
+          applied to the list of possible completions generated by the
+          preceding options and arguments, and each completion matching
+          FILTERPAT is removed from the list.  A leading '!' in
+          FILTERPAT negates the pattern; in this case, any completion
+          not matching FILTERPAT is removed.
+
+     The return value is true unless an invalid option is supplied, an
+     option other than '-p' or '-r' is supplied without a NAME argument,
+     an attempt is made to remove a completion specification for a NAME
+     for which no specification exists, or an error occurs adding a
+     completion specification.
+
+'compopt'
+          compopt [-o OPTION] [-DEI] [+o OPTION] [NAME]
+     Modify completion options for each NAME according to the OPTIONs,
+     or for the currently-executing completion if no NAMEs are supplied.
+     If no OPTIONs are given, display the completion options for each
+     NAME or the current completion.  The possible values of OPTION are
+     those valid for the 'complete' builtin described above.  The '-D'
+     option indicates that other supplied options should apply to the
+     "default" command completion; that is, completion attempted on a
+     command for which no completion has previously been defined.  The
+     '-E' option indicates that other supplied options should apply to
+     "empty" command completion; that is, completion attempted on a
+     blank line.  The '-I' option indicates that other supplied options
+     should apply to completion on the initial non-assignment word on
+     the line, or after a command delimiter such as ';' or '|', which is
+     usually command name completion.
+
+     If multiple options are supplied, the '-D' option takes precedence
+     over '-E', and both take precedence over '-I'
+
+     The return value is true unless an invalid option is supplied, an
+     attempt is made to modify the options for a NAME for which no
+     completion specification exists, or an output error occurs.
+
+
+File: bash.info,  Node: A Programmable Completion Example,  Prev: Programmable Completion Builtins,  Up: Command Line Editing
+
+8.8 A Programmable Completion Example
+=====================================
+
+The most common way to obtain additional completion functionality beyond
+the default actions 'complete' and 'compgen' provide is to use a shell
+function and bind it to a particular command using 'complete -F'.
+
+   The following function provides completions for the 'cd' builtin.  It
+is a reasonably good example of what shell functions must do when used
+for completion.  This function uses the word passed as '$2' to determine
+the directory name to complete.  You can also use the 'COMP_WORDS' array
+variable; the current word is indexed by the 'COMP_CWORD' variable.
+
+   The function relies on the 'complete' and 'compgen' builtins to do
+much of the work, adding only the things that the Bash 'cd' does beyond
+accepting basic directory names: tilde expansion (*note Tilde
+Expansion::), searching directories in $CDPATH, which is described above
+(*note Bourne Shell Builtins::), and basic support for the 'cdable_vars'
+shell option (*note The Shopt Builtin::).  '_comp_cd' modifies the value
+of IFS so that it contains only a newline to accommodate file names
+containing spaces and tabs - 'compgen' prints the possible completions
+it generates one per line.
+
+   Possible completions go into the COMPREPLY array variable, one
+completion per array element.  The programmable completion system
+retrieves the completions from there when the function returns.
+
+     # A completion function for the cd builtin
+     # based on the cd completion function from the bash_completion package
+     _comp_cd()
+     {
+         local IFS=$' \t\n'    # normalize IFS
+         local cur _skipdot _cdpath
+         local i j k
+
+         # Tilde expansion, which also expands tilde to full pathname
+         case "$2" in
+         \~*)    eval cur="$2" ;;
+         *)      cur=$2 ;;
+         esac
+
+         # no cdpath or absolute pathname -- straight directory completion
+         if [[ -z "${CDPATH:-}" ]] || [[ "$cur" == @(./*|../*|/*) ]]; then
+             # compgen prints paths one per line; could also use while loop
+             IFS=$'\n'
+             COMPREPLY=( $(compgen -d -- "$cur") )
+             IFS=$' \t\n'
+         # CDPATH+directories in the current directory if not in CDPATH
+         else
+             IFS=$'\n'
+             _skipdot=false
+             # preprocess CDPATH to convert null directory names to .
+             _cdpath=${CDPATH/#:/.:}
+             _cdpath=${_cdpath//::/:.:}
+             _cdpath=${_cdpath/%:/:.}
+             for i in ${_cdpath//:/$'\n'}; do
+                 if [[ $i -ef . ]]; then _skipdot=true; fi
+                 k="${#COMPREPLY[@]}"
+                 for j in $( compgen -d -- "$i/$cur" ); do
+                     COMPREPLY[k++]=${j#$i/}        # cut off directory
+                 done
+             done
+             $_skipdot || COMPREPLY+=( $(compgen -d -- "$cur") )
+             IFS=$' \t\n'
+         fi
+
+         # variable names if appropriate shell option set and no completions
+         if shopt -q cdable_vars && [[ ${#COMPREPLY[@]} -eq 0 ]]; then
+             COMPREPLY=( $(compgen -v -- "$cur") )
+         fi
+
+         return 0
+     }
+
+   We install the completion function using the '-F' option to
+'complete':
+
+     # Tell readline to quote appropriate and append slashes to directories;
+     # use the bash default completion for other arguments
+     complete -o filenames -o nospace -o bashdefault -F _comp_cd cd
+
+Since we'd like Bash and Readline to take care of some of the other
+details for us, we use several other options to tell Bash and Readline
+what to do.  The '-o filenames' option tells Readline that the possible
+completions should be treated as filenames, and quoted appropriately.
+That option will also cause Readline to append a slash to filenames it
+can determine are directories (which is why we might want to extend
+'_comp_cd' to append a slash if we're using directories found via
+CDPATH: Readline can't tell those completions are directories).  The '-o
+nospace' option tells Readline to not append a space character to the
+directory name, in case we want to append to it.  The '-o bashdefault'
+option brings in the rest of the "Bash default" completions - possible
+completion that Bash adds to the default Readline set.  These include
+things like command name completion, variable completion for words
+beginning with '$' or '${', completions containing pathname expansion
+patterns (*note Filename Expansion::), and so on.
+
+   Once installed using 'complete', '_comp_cd' will be called every time
+we attempt word completion for a 'cd' command.
+
+   Many more examples - an extensive collection of completions for most
+of the common GNU, Unix, and Linux commands - are available as part of
+the bash_completion project.  This is installed by default on many
+GNU/Linux distributions.  Originally written by Ian Macdonald, the
+project now lives at <https://github.com/scop/bash-completion/>.  There
+are ports for other systems such as Solaris and Mac OS X.
+
+   An older version of the bash_completion package is distributed with
+bash in the 'examples/complete' subdirectory.
+
+
+File: bash.info,  Node: Using History Interactively,  Next: Installing Bash,  Prev: Command Line Editing,  Up: Top
+
+9 Using History Interactively
+*****************************
+
+This chapter describes how to use the GNU History Library interactively,
+from a user's standpoint.  It should be considered a user's guide.  For
+information on using the GNU History Library in other programs, see the
+GNU Readline Library Manual.
+
+* Menu:
+
+* Bash History Facilities::	How Bash lets you manipulate your command
+				history.
+* Bash History Builtins::	The Bash builtin commands that manipulate
+				the command history.
+* History Interaction::		What it feels like using History as a user.
+
+
+File: bash.info,  Node: Bash History Facilities,  Next: Bash History Builtins,  Up: Using History Interactively
+
+9.1 Bash History Facilities
+===========================
+
+When the '-o history' option to the 'set' builtin is enabled (*note The
+Set Builtin::), the shell provides access to the "command history", the
+list of commands previously typed.  The value of the 'HISTSIZE' shell
+variable is used as the number of commands to save in a history list.
+The text of the last '$HISTSIZE' commands (default 500) is saved.  The
+shell stores each command in the history list prior to parameter and
+variable expansion but after history expansion is performed, subject to
+the values of the shell variables 'HISTIGNORE' and 'HISTCONTROL'.
+
+   When the shell starts up, the history is initialized from the file
+named by the 'HISTFILE' variable (default '~/.bash_history').  The file
+named by the value of 'HISTFILE' is truncated, if necessary, to contain
+no more than the number of lines specified by the value of the
+'HISTFILESIZE' variable.  When a shell with history enabled exits, the
+last '$HISTSIZE' lines are copied from the history list to the file
+named by '$HISTFILE'.  If the 'histappend' shell option is set (*note
+Bash Builtins::), the lines are appended to the history file, otherwise
+the history file is overwritten.  If 'HISTFILE' is unset, or if the
+history file is unwritable, the history is not saved.  After saving the
+history, the history file is truncated to contain no more than
+'$HISTFILESIZE' lines.  If 'HISTFILESIZE' is unset, or set to null, a
+non-numeric value, or a numeric value less than zero, the history file
+is not truncated.
+
+   If the 'HISTTIMEFORMAT' is set, the time stamp information associated
+with each history entry is written to the history file, marked with the
+history comment character.  When the history file is read, lines
+beginning with the history comment character followed immediately by a
+digit are interpreted as timestamps for the following history entry.
+
+   The builtin command 'fc' may be used to list or edit and re-execute a
+portion of the history list.  The 'history' builtin may be used to
+display or modify the history list and manipulate the history file.
+When using command-line editing, search commands are available in each
+editing mode that provide access to the history list (*note Commands For
+History::).
+
+   The shell allows control over which commands are saved on the history
+list.  The 'HISTCONTROL' and 'HISTIGNORE' variables may be set to cause
+the shell to save only a subset of the commands entered.  The 'cmdhist'
+shell option, if enabled, causes the shell to attempt to save each line
+of a multi-line command in the same history entry, adding semicolons
+where necessary to preserve syntactic correctness.  The 'lithist' shell
+option causes the shell to save the command with embedded newlines
+instead of semicolons.  The 'shopt' builtin is used to set these
+options.  *Note The Shopt Builtin::, for a description of 'shopt'.
+
+
+File: bash.info,  Node: Bash History Builtins,  Next: History Interaction,  Prev: Bash History Facilities,  Up: Using History Interactively
+
+9.2 Bash History Builtins
+=========================
+
+Bash provides two builtin commands which manipulate the history list and
+history file.
+
+'fc'
+          fc [-e ENAME] [-lnr] [FIRST] [LAST]
+          fc -s [PAT=REP] [COMMAND]
+
+     The first form selects a range of commands from FIRST to LAST from
+     the history list and displays or edits and re-executes them.  Both
+     FIRST and LAST may be specified as a string (to locate the most
+     recent command beginning with that string) or as a number (an index
+     into the history list, where a negative number is used as an offset
+     from the current command number).
+
+     When listing, a FIRST or LAST of 0 is equivalent to -1 and -0 is
+     equivalent to the current command (usually the 'fc' command);
+     otherwise 0 is equivalent to -1 and -0 is invalid.
+
+     If LAST is not specified, it is set to FIRST.  If FIRST is not
+     specified, it is set to the previous command for editing and -16
+     for listing.  If the '-l' flag is given, the commands are listed on
+     standard output.  The '-n' flag suppresses the command numbers when
+     listing.  The '-r' flag reverses the order of the listing.
+     Otherwise, the editor given by ENAME is invoked on a file
+     containing those commands.  If ENAME is not given, the value of the
+     following variable expansion is used: '${FCEDIT:-${EDITOR:-vi}}'.
+     This says to use the value of the 'FCEDIT' variable if set, or the
+     value of the 'EDITOR' variable if that is set, or 'vi' if neither
+     is set.  When editing is complete, the edited commands are echoed
+     and executed.
+
+     In the second form, COMMAND is re-executed after each instance of
+     PAT in the selected command is replaced by REP.  COMMAND is
+     interpreted the same as FIRST above.
+
+     A useful alias to use with the 'fc' command is 'r='fc -s'', so that
+     typing 'r cc' runs the last command beginning with 'cc' and typing
+     'r' re-executes the last command (*note Aliases::).
+
+'history'
+          history [N]
+          history -c
+          history -d OFFSET
+          history -d START-END
+          history [-anrw] [FILENAME]
+          history -ps ARG
+
+     With no options, display the history list with line numbers.  Lines
+     prefixed with a '*' have been modified.  An argument of N lists
+     only the last N lines.  If the shell variable 'HISTTIMEFORMAT' is
+     set and not null, it is used as a format string for STRFTIME to
+     display the time stamp associated with each displayed history
+     entry.  No intervening blank is printed between the formatted time
+     stamp and the history line.
+
+     Options, if supplied, have the following meanings:
+
+     '-c'
+          Clear the history list.  This may be combined with the other
+          options to replace the history list completely.
+
+     '-d OFFSET'
+          Delete the history entry at position OFFSET.  If OFFSET is
+          positive, it should be specified as it appears when the
+          history is displayed.  If OFFSET is negative, it is
+          interpreted as relative to one greater than the last history
+          position, so negative indices count back from the end of the
+          history, and an index of '-1' refers to the current 'history
+          -d' command.
+
+     '-d START-END'
+          Delete the history entries between positions START and END,
+          inclusive.  Positive and negative values for START and END are
+          interpreted as described above.
+
+     '-a'
+          Append the new history lines to the history file.  These are
+          history lines entered since the beginning of the current Bash
+          session, but not already appended to the history file.
+
+     '-n'
+          Append the history lines not already read from the history
+          file to the current history list.  These are lines appended to
+          the history file since the beginning of the current Bash
+          session.
+
+     '-r'
+          Read the history file and append its contents to the history
+          list.
+
+     '-w'
+          Write out the current history list to the history file.
+
+     '-p'
+          Perform history substitution on the ARGs and display the
+          result on the standard output, without storing the results in
+          the history list.
+
+     '-s'
+          The ARGs are added to the end of the history list as a single
+          entry.
+
+     When any of the '-w', '-r', '-a', or '-n' options is used, if
+     FILENAME is given, then it is used as the history file.  If not,
+     then the value of the 'HISTFILE' variable is used.
+
+
+File: bash.info,  Node: History Interaction,  Prev: Bash History Builtins,  Up: Using History Interactively
+
+9.3 History Expansion
+=====================
+
+The History library provides a history expansion feature that is similar
+to the history expansion provided by 'csh'.  This section describes the
+syntax used to manipulate the history information.
+
+   History expansions introduce words from the history list into the
+input stream, making it easy to repeat commands, insert the arguments to
+a previous command into the current input line, or fix errors in
+previous commands quickly.
+
+   History expansion is performed immediately after a complete line is
+read, before the shell breaks it into words, and is performed on each
+line individually.  Bash attempts to inform the history expansion
+functions about quoting still in effect from previous lines.
+
+   History expansion takes place in two parts.  The first is to
+determine which line from the history list should be used during
+substitution.  The second is to select portions of that line for
+inclusion into the current one.  The line selected from the history is
+called the "event", and the portions of that line that are acted upon
+are called "words".  Various "modifiers" are available to manipulate the
+selected words.  The line is broken into words in the same fashion that
+Bash does, so that several words surrounded by quotes are considered one
+word.  History expansions are introduced by the appearance of the
+history expansion character, which is '!' by default.
+
+   History expansion implements shell-like quoting conventions: a
+backslash can be used to remove the special handling for the next
+character; single quotes enclose verbatim sequences of characters, and
+can be used to inhibit history expansion; and characters enclosed within
+double quotes may be subject to history expansion, since backslash can
+escape the history expansion character, but single quotes may not, since
+they are not treated specially within double quotes.
+
+   When using the shell, only '\' and ''' may be used to escape the
+history expansion character, but the history expansion character is also
+treated as quoted if it immediately precedes the closing double quote in
+a double-quoted string.
+
+   Several shell options settable with the 'shopt' builtin (*note The
+Shopt Builtin::) may be used to tailor the behavior of history
+expansion.  If the 'histverify' shell option is enabled, and Readline is
+being used, history substitutions are not immediately passed to the
+shell parser.  Instead, the expanded line is reloaded into the Readline
+editing buffer for further modification.  If Readline is being used, and
+the 'histreedit' shell option is enabled, a failed history expansion
+will be reloaded into the Readline editing buffer for correction.  The
+'-p' option to the 'history' builtin command may be used to see what a
+history expansion will do before using it.  The '-s' option to the
+'history' builtin may be used to add commands to the end of the history
+list without actually executing them, so that they are available for
+subsequent recall.  This is most useful in conjunction with Readline.
+
+   The shell allows control of the various characters used by the
+history expansion mechanism with the 'histchars' variable, as explained
+above (*note Bash Variables::).  The shell uses the history comment
+character to mark history timestamps when writing the history file.
+
+* Menu:
+
+* Event Designators::	How to specify which history line to use.
+* Word Designators::	Specifying which words are of interest.
+* Modifiers::		Modifying the results of substitution.
+
+
+File: bash.info,  Node: Event Designators,  Next: Word Designators,  Up: History Interaction
+
+9.3.1 Event Designators
+-----------------------
+
+An event designator is a reference to a command line entry in the
+history list.  Unless the reference is absolute, events are relative to
+the current position in the history list.
+
+'!'
+     Start a history substitution, except when followed by a space, tab,
+     the end of the line, '=' or '(' (when the 'extglob' shell option is
+     enabled using the 'shopt' builtin).
+
+'!N'
+     Refer to command line N.
+
+'!-N'
+     Refer to the command N lines back.
+
+'!!'
+     Refer to the previous command.  This is a synonym for '!-1'.
+
+'!STRING'
+     Refer to the most recent command preceding the current position in
+     the history list starting with STRING.
+
+'!?STRING[?]'
+     Refer to the most recent command preceding the current position in
+     the history list containing STRING.  The trailing '?' may be
+     omitted if the STRING is followed immediately by a newline.  If
+     STRING is missing, the string from the most recent search is used;
+     it is an error if there is no previous search string.
+
+'^STRING1^STRING2^'
+     Quick Substitution.  Repeat the last command, replacing STRING1
+     with STRING2.  Equivalent to '!!:s^STRING1^STRING2^'.
+
+'!#'
+     The entire command line typed so far.
+
+
+File: bash.info,  Node: Word Designators,  Next: Modifiers,  Prev: Event Designators,  Up: History Interaction
+
+9.3.2 Word Designators
+----------------------
+
+Word designators are used to select desired words from the event.  A ':'
+separates the event specification from the word designator.  It may be
+omitted if the word designator begins with a '^', '$', '*', '-', or '%'.
+Words are numbered from the beginning of the line, with the first word
+being denoted by 0 (zero).  Words are inserted into the current line
+separated by single spaces.
+
+   For example,
+
+'!!'
+     designates the preceding command.  When you type this, the
+     preceding command is repeated in toto.
+
+'!!:$'
+     designates the last argument of the preceding command.  This may be
+     shortened to '!$'.
+
+'!fi:2'
+     designates the second argument of the most recent command starting
+     with the letters 'fi'.
+
+   Here are the word designators:
+
+'0 (zero)'
+     The '0'th word.  For many applications, this is the command word.
+
+'N'
+     The Nth word.
+
+'^'
+     The first argument; that is, word 1.
+
+'$'
+     The last argument.
+
+'%'
+     The first word matched by the most recent '?STRING?' search, if the
+     search string begins with a character that is part of a word.
+
+'X-Y'
+     A range of words; '-Y' abbreviates '0-Y'.
+
+'*'
+     All of the words, except the '0'th.  This is a synonym for '1-$'.
+     It is not an error to use '*' if there is just one word in the
+     event; the empty string is returned in that case.
+
+'X*'
+     Abbreviates 'X-$'
+
+'X-'
+     Abbreviates 'X-$' like 'X*', but omits the last word.  If 'x' is
+     missing, it defaults to 0.
+
+   If a word designator is supplied without an event specification, the
+previous command is used as the event.
+
+
+File: bash.info,  Node: Modifiers,  Prev: Word Designators,  Up: History Interaction
+
+9.3.3 Modifiers
+---------------
+
+After the optional word designator, you can add a sequence of one or
+more of the following modifiers, each preceded by a ':'.  These modify,
+or edit, the word or words selected from the history event.
+
+'h'
+     Remove a trailing pathname component, leaving only the head.
+
+'t'
+     Remove all leading pathname components, leaving the tail.
+
+'r'
+     Remove a trailing suffix of the form '.SUFFIX', leaving the
+     basename.
+
+'e'
+     Remove all but the trailing suffix.
+
+'p'
+     Print the new command but do not execute it.
+
+'q'
+     Quote the substituted words, escaping further substitutions.
+
+'x'
+     Quote the substituted words as with 'q', but break into words at
+     spaces, tabs, and newlines.  The 'q' and 'x' modifiers are mutually
+     exclusive; the last one supplied is used.
+
+'s/OLD/NEW/'
+     Substitute NEW for the first occurrence of OLD in the event line.
+     Any character may be used as the delimiter in place of '/'.  The
+     delimiter may be quoted in OLD and NEW with a single backslash.  If
+     '&' appears in NEW, it is replaced by OLD.  A single backslash will
+     quote the '&'.  If OLD is null, it is set to the last OLD
+     substituted, or, if no previous history substitutions took place,
+     the last STRING in a !?STRING'[?]' search.  If NEW is is null, each
+     matching OLD is deleted.  The final delimiter is optional if it is
+     the last character on the input line.
+
+'&'
+     Repeat the previous substitution.
+
+'g'
+'a'
+     Cause changes to be applied over the entire event line.  Used in
+     conjunction with 's', as in 'gs/OLD/NEW/', or with '&'.
+
+'G'
+     Apply the following 's' or '&' modifier once to each word in the
+     event.
+
+
+File: bash.info,  Node: Installing Bash,  Next: Reporting Bugs,  Prev: Using History Interactively,  Up: Top
+
+10 Installing Bash
+******************
+
+This chapter provides basic instructions for installing Bash on the
+various supported platforms.  The distribution supports the GNU
+operating systems, nearly every version of Unix, and several non-Unix
+systems such as BeOS and Interix.  Other independent ports exist for
+MS-DOS, OS/2, and Windows platforms.
+
+* Menu:
+
+* Basic Installation::	Installation instructions.
+* Compilers and Options::	How to set special options for various
+				systems.
+* Compiling For Multiple Architectures::	How to compile Bash for more
+						than one kind of system from
+						the same source tree.
+* Installation Names::	How to set the various paths used by the installation.
+* Specifying the System Type::	How to configure Bash for a particular system.
+* Sharing Defaults::	How to share default configuration values among GNU
+			programs.
+* Operation Controls::	Options recognized by the configuration program.
+* Optional Features::	How to enable and disable optional features when
+			building Bash.
+
+
+File: bash.info,  Node: Basic Installation,  Next: Compilers and Options,  Up: Installing Bash
+
+10.1 Basic Installation
+=======================
+
+These are installation instructions for Bash.
+
+   The simplest way to compile Bash is:
+
+  1. 'cd' to the directory containing the source code and type
+     './configure' to configure Bash for your system.  If you're using
+     'csh' on an old version of System V, you might need to type 'sh
+     ./configure' instead to prevent 'csh' from trying to execute
+     'configure' itself.
+
+     Running 'configure' takes some time.  While running, it prints
+     messages telling which features it is checking for.
+
+  2. Type 'make' to compile Bash and build the 'bashbug' bug reporting
+     script.
+
+  3. Optionally, type 'make tests' to run the Bash test suite.
+
+  4. Type 'make install' to install 'bash' and 'bashbug'.  This will
+     also install the manual pages and Info file.
+
+   The 'configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a 'Makefile' in each directory of the package
+(the top directory, the 'builtins', 'doc', and 'support' directories,
+each directory under 'lib', and several others).  It also creates a
+'config.h' file containing system-dependent definitions.  Finally, it
+creates a shell script named 'config.status' that you can run in the
+future to recreate the current configuration, a file 'config.cache' that
+saves the results of its tests to speed up reconfiguring, and a file
+'config.log' containing compiler output (useful mainly for debugging
+'configure').  If at some point 'config.cache' contains results you
+don't want to keep, you may remove or edit it.
+
+   To find out more about the options and arguments that the 'configure'
+script understands, type
+
+     bash-4.2$ ./configure --help
+
+at the Bash prompt in your Bash source directory.
+
+   If you want to build Bash in a directory separate from the source
+directory - to build for multiple architectures, for example - just use
+the full path to the configure script.  The following commands will
+build bash in a directory under '/usr/local/build' from the source code
+in '/usr/local/src/bash-4.4':
+
+     mkdir /usr/local/build/bash-4.4
+     cd /usr/local/build/bash-4.4
+     bash /usr/local/src/bash-4.4/configure
+     make
+
+   See *note Compiling For Multiple Architectures:: for more information
+about building in a directory separate from the source.
+
+   If you need to do unusual things to compile Bash, please try to
+figure out how 'configure' could check whether or not to do them, and
+mail diffs or instructions to <bash-maintainers@gnu.org> so they can be
+considered for the next release.
+
+   The file 'configure.ac' is used to create 'configure' by a program
+called Autoconf.  You only need 'configure.ac' if you want to change it
+or regenerate 'configure' using a newer version of Autoconf.  If you do
+this, make sure you are using Autoconf version 2.50 or newer.
+
+   You can remove the program binaries and object files from the source
+code directory by typing 'make clean'.  To also remove the files that
+'configure' created (so you can compile Bash for a different kind of
+computer), type 'make distclean'.
+
+
+File: bash.info,  Node: Compilers and Options,  Next: Compiling For Multiple Architectures,  Prev: Basic Installation,  Up: Installing Bash
+
+10.2 Compilers and Options
+==========================
+
+Some systems require unusual options for compilation or linking that the
+'configure' script does not know about.  You can give 'configure'
+initial values for variables by setting them in the environment.  Using
+a Bourne-compatible shell, you can do that on the command line like
+this:
+
+     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+
+   On systems that have the 'env' program, you can do it like this:
+
+     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+
+   The configuration process uses GCC to build Bash if it is available.
+
+
+File: bash.info,  Node: Compiling For Multiple Architectures,  Next: Installation Names,  Prev: Compilers and Options,  Up: Installing Bash
+
+10.3 Compiling For Multiple Architectures
+=========================================
+
+You can compile Bash for more than one kind of computer at the same
+time, by placing the object files for each architecture in their own
+directory.  To do this, you must use a version of 'make' that supports
+the 'VPATH' variable, such as GNU 'make'.  'cd' to the directory where
+you want the object files and executables to go and run the 'configure'
+script from the source directory (*note Basic Installation::).  You may
+need to supply the '--srcdir=PATH' argument to tell 'configure' where
+the source files are.  'configure' automatically checks for the source
+code in the directory that 'configure' is in and in '..'.
+
+   If you have to use a 'make' that does not supports the 'VPATH'
+variable, you can compile Bash for one architecture at a time in the
+source code directory.  After you have installed Bash for one
+architecture, use 'make distclean' before reconfiguring for another
+architecture.
+
+   Alternatively, if your system supports symbolic links, you can use
+the 'support/mkclone' script to create a build tree which has symbolic
+links back to each file in the source directory.  Here's an example that
+creates a build directory in the current directory from a source
+directory '/usr/gnu/src/bash-2.0':
+
+     bash /usr/gnu/src/bash-2.0/support/mkclone -s /usr/gnu/src/bash-2.0 .
+
+The 'mkclone' script requires Bash, so you must have already built Bash
+for at least one architecture before you can create build directories
+for other architectures.
+
+
+File: bash.info,  Node: Installation Names,  Next: Specifying the System Type,  Prev: Compiling For Multiple Architectures,  Up: Installing Bash
+
+10.4 Installation Names
+=======================
+
+By default, 'make install' will install into '/usr/local/bin',
+'/usr/local/man', etc.  You can specify an installation prefix other
+than '/usr/local' by giving 'configure' the option '--prefix=PATH', or
+by specifying a value for the 'DESTDIR' 'make' variable when running
+'make install'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+give 'configure' the option '--exec-prefix=PATH', 'make install' will
+use PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+
+File: bash.info,  Node: Specifying the System Type,  Next: Sharing Defaults,  Prev: Installation Names,  Up: Installing Bash
+
+10.5 Specifying the System Type
+===============================
+
+There may be some features 'configure' can not figure out automatically,
+but need to determine by the type of host Bash will run on.  Usually
+'configure' can figure that out, but if it prints a message saying it
+can not guess the host type, give it the '--host=TYPE' option.  'TYPE'
+can either be a short name for the system type, such as 'sun4', or a
+canonical name with three fields: 'CPU-COMPANY-SYSTEM' (e.g.,
+'i386-unknown-freebsd4.2').
+
+   See the file 'support/config.sub' for the possible values of each
+field.
+
+
+File: bash.info,  Node: Sharing Defaults,  Next: Operation Controls,  Prev: Specifying the System Type,  Up: Installing Bash
+
+10.6 Sharing Defaults
+=====================
+
+If you want to set default values for 'configure' scripts to share, you
+can create a site shell script called 'config.site' that gives default
+values for variables like 'CC', 'cache_file', and 'prefix'.  'configure'
+looks for 'PREFIX/share/config.site' if it exists, then
+'PREFIX/etc/config.site' if it exists.  Or, you can set the
+'CONFIG_SITE' environment variable to the location of the site script.
+A warning: the Bash 'configure' looks for a site script, but not all
+'configure' scripts do.
+
+
+File: bash.info,  Node: Operation Controls,  Next: Optional Features,  Prev: Sharing Defaults,  Up: Installing Bash
+
+10.7 Operation Controls
+=======================
+
+'configure' recognizes the following options to control how it operates.
+
+'--cache-file=FILE'
+     Use and save the results of the tests in FILE instead of
+     './config.cache'.  Set FILE to '/dev/null' to disable caching, for
+     debugging 'configure'.
+
+'--help'
+     Print a summary of the options to 'configure', and exit.
+
+'--quiet'
+'--silent'
+'-q'
+     Do not print messages saying which checks are being made.
+
+'--srcdir=DIR'
+     Look for the Bash source code in directory DIR.  Usually
+     'configure' can determine that directory automatically.
+
+'--version'
+     Print the version of Autoconf used to generate the 'configure'
+     script, and exit.
+
+   'configure' also accepts some other, not widely used, boilerplate
+options.  'configure --help' prints the complete list.
+
+
+File: bash.info,  Node: Optional Features,  Prev: Operation Controls,  Up: Installing Bash
+
+10.8 Optional Features
+======================
+
+The Bash 'configure' has a number of '--enable-FEATURE' options, where
+FEATURE indicates an optional part of Bash.  There are also several
+'--with-PACKAGE' options, where PACKAGE is something like 'bash-malloc'
+or 'purify'.  To turn off the default use of a package, use
+'--without-PACKAGE'.  To configure Bash without a feature that is
+enabled by default, use '--disable-FEATURE'.
+
+   Here is a complete list of the '--enable-' and '--with-' options that
+the Bash 'configure' recognizes.
+
+'--with-afs'
+     Define if you are using the Andrew File System from Transarc.
+
+'--with-bash-malloc'
+     Use the Bash version of 'malloc' in the directory 'lib/malloc'.
+     This is not the same 'malloc' that appears in GNU libc, but an
+     older version originally derived from the 4.2 BSD 'malloc'.  This
+     'malloc' is very fast, but wastes some space on each allocation.
+     This option is enabled by default.  The 'NOTES' file contains a
+     list of systems for which this should be turned off, and
+     'configure' disables this option automatically for a number of
+     systems.
+
+'--with-curses'
+     Use the curses library instead of the termcap library.  This should
+     be supplied if your system has an inadequate or incomplete termcap
+     database.
+
+'--with-gnu-malloc'
+     A synonym for '--with-bash-malloc'.
+
+'--with-installed-readline[=PREFIX]'
+     Define this to make Bash link with a locally-installed version of
+     Readline rather than the version in 'lib/readline'.  This works
+     only with Readline 5.0 and later versions.  If PREFIX is 'yes' or
+     not supplied, 'configure' uses the values of the make variables
+     'includedir' and 'libdir', which are subdirectories of 'prefix' by
+     default, to find the installed version of Readline if it is not in
+     the standard system include and library directories.  If PREFIX is
+     'no', Bash links with the version in 'lib/readline'.  If PREFIX is
+     set to any other value, 'configure' treats it as a directory
+     pathname and looks for the installed version of Readline in
+     subdirectories of that directory (include files in PREFIX/'include'
+     and the library in PREFIX/'lib').
+
+'--with-purify'
+     Define this to use the Purify memory allocation checker from
+     Rational Software.
+
+'--enable-minimal-config'
+     This produces a shell with minimal features, close to the
+     historical Bourne shell.
+
+   There are several '--enable-' options that alter how Bash is compiled
+and linked, rather than changing run-time features.
+
+'--enable-largefile'
+     Enable support for large files
+     (http://www.unix.org/version2/whatsnew/lfs20mar.html) if the
+     operating system requires special compiler options to build
+     programs which can access large files.  This is enabled by default,
+     if the operating system provides large file support.
+
+'--enable-profiling'
+     This builds a Bash binary that produces profiling information to be
+     processed by 'gprof' each time it is executed.
+
+'--enable-static-link'
+     This causes Bash to be linked statically, if 'gcc' is being used.
+     This could be used to build a version to use as root's shell.
+
+   The 'minimal-config' option can be used to disable all of the
+following options, but it is processed first, so individual options may
+be enabled using 'enable-FEATURE'.
+
+   All of the following options except for 'disabled-builtins',
+'direxpand-default', and 'xpg-echo-default' are enabled by default,
+unless the operating system does not provide the necessary support.
+
+'--enable-alias'
+     Allow alias expansion and include the 'alias' and 'unalias'
+     builtins (*note Aliases::).
+
+'--enable-arith-for-command'
+     Include support for the alternate form of the 'for' command that
+     behaves like the C language 'for' statement (*note Looping
+     Constructs::).
+
+'--enable-array-variables'
+     Include support for one-dimensional array shell variables (*note
+     Arrays::).
+
+'--enable-bang-history'
+     Include support for 'csh'-like history substitution (*note History
+     Interaction::).
+
+'--enable-brace-expansion'
+     Include 'csh'-like brace expansion ( 'b{a,b}c' ==> 'bac bbc' ).
+     See *note Brace Expansion::, for a complete description.
+
+'--enable-casemod-attributes'
+     Include support for case-modifying attributes in the 'declare'
+     builtin and assignment statements.  Variables with the UPPERCASE
+     attribute, for example, will have their values converted to
+     uppercase upon assignment.
+
+'--enable-casemod-expansion'
+     Include support for case-modifying word expansions.
+
+'--enable-command-timing'
+     Include support for recognizing 'time' as a reserved word and for
+     displaying timing statistics for the pipeline following 'time'
+     (*note Pipelines::).  This allows pipelines as well as shell
+     builtins and functions to be timed.
+
+'--enable-cond-command'
+     Include support for the '[[' conditional command.  (*note
+     Conditional Constructs::).
+
+'--enable-cond-regexp'
+     Include support for matching POSIX regular expressions using the
+     '=~' binary operator in the '[[' conditional command.  (*note
+     Conditional Constructs::).
+
+'--enable-coprocesses'
+     Include support for coprocesses and the 'coproc' reserved word
+     (*note Pipelines::).
+
+'--enable-debugger'
+     Include support for the bash debugger (distributed separately).
+
+'--enable-dev-fd-stat-broken'
+     If calling 'stat' on /dev/fd/N returns different results than
+     calling 'fstat' on file descriptor N, supply this option to enable
+     a workaround.  This has implications for conditional commands that
+     test file attributes.
+
+'--enable-direxpand-default'
+     Cause the 'direxpand' shell option (*note The Shopt Builtin::) to
+     be enabled by default when the shell starts.  It is normally
+     disabled by default.
+
+'--enable-directory-stack'
+     Include support for a 'csh'-like directory stack and the 'pushd',
+     'popd', and 'dirs' builtins (*note The Directory Stack::).
+
+'--enable-disabled-builtins'
+     Allow builtin commands to be invoked via 'builtin xxx' even after
+     'xxx' has been disabled using 'enable -n xxx'.  See *note Bash
+     Builtins::, for details of the 'builtin' and 'enable' builtin
+     commands.
+
+'--enable-dparen-arithmetic'
+     Include support for the '((...))' command (*note Conditional
+     Constructs::).
+
+'--enable-extended-glob'
+     Include support for the extended pattern matching features
+     described above under *note Pattern Matching::.
+
+'--enable-extended-glob-default'
+     Set the default value of the EXTGLOB shell option described above
+     under *note The Shopt Builtin:: to be enabled.
+
+'--enable-function-import'
+     Include support for importing function definitions exported by
+     another instance of the shell from the environment.  This option is
+     enabled by default.
+
+'--enable-glob-asciirange-default'
+     Set the default value of the GLOBASCIIRANGES shell option described
+     above under *note The Shopt Builtin:: to be enabled.  This controls
+     the behavior of character ranges when used in pattern matching
+     bracket expressions.
+
+'--enable-help-builtin'
+     Include the 'help' builtin, which displays help on shell builtins
+     and variables (*note Bash Builtins::).
+
+'--enable-history'
+     Include command history and the 'fc' and 'history' builtin commands
+     (*note Bash History Facilities::).
+
+'--enable-job-control'
+     This enables the job control features (*note Job Control::), if the
+     operating system supports them.
+
+'--enable-multibyte'
+     This enables support for multibyte characters if the operating
+     system provides the necessary support.
+
+'--enable-net-redirections'
+     This enables the special handling of filenames of the form
+     '/dev/tcp/HOST/PORT' and '/dev/udp/HOST/PORT' when used in
+     redirections (*note Redirections::).
+
+'--enable-process-substitution'
+     This enables process substitution (*note Process Substitution::) if
+     the operating system provides the necessary support.
+
+'--enable-progcomp'
+     Enable the programmable completion facilities (*note Programmable
+     Completion::).  If Readline is not enabled, this option has no
+     effect.
+
+'--enable-prompt-string-decoding'
+     Turn on the interpretation of a number of backslash-escaped
+     characters in the '$PS0', '$PS1', '$PS2', and '$PS4' prompt
+     strings.  See *note Controlling the Prompt::, for a complete list
+     of prompt string escape sequences.
+
+'--enable-readline'
+     Include support for command-line editing and history with the Bash
+     version of the Readline library (*note Command Line Editing::).
+
+'--enable-restricted'
+     Include support for a "restricted shell".  If this is enabled,
+     Bash, when called as 'rbash', enters a restricted mode.  See *note
+     The Restricted Shell::, for a description of restricted mode.
+
+'--enable-select'
+     Include the 'select' compound command, which allows the generation
+     of simple menus (*note Conditional Constructs::).
+
+'--enable-separate-helpfiles'
+     Use external files for the documentation displayed by the 'help'
+     builtin instead of storing the text internally.
+
+'--enable-single-help-strings'
+     Store the text displayed by the 'help' builtin as a single string
+     for each help topic.  This aids in translating the text to
+     different languages.  You may need to disable this if your compiler
+     cannot handle very long string literals.
+
+'--enable-strict-posix-default'
+     Make Bash POSIX-conformant by default (*note Bash POSIX Mode::).
+
+'--enable-usg-echo-default'
+     A synonym for '--enable-xpg-echo-default'.
+
+'--enable-xpg-echo-default'
+     Make the 'echo' builtin expand backslash-escaped characters by
+     default, without requiring the '-e' option.  This sets the default
+     value of the 'xpg_echo' shell option to 'on', which makes the Bash
+     'echo' behave more like the version specified in the Single Unix
+     Specification, version 3.  *Note Bash Builtins::, for a description
+     of the escape sequences that 'echo' recognizes.
+
+   The file 'config-top.h' contains C Preprocessor '#define' statements
+for options which are not settable from 'configure'.  Some of these are
+not meant to be changed; beware of the consequences if you do.  Read the
+comments associated with each definition for more information about its
+effect.
+
+
+File: bash.info,  Node: Reporting Bugs,  Next: Major Differences From The Bourne Shell,  Prev: Installing Bash,  Up: Top
+
+Appendix A Reporting Bugs
+*************************
+
+Please report all bugs you find in Bash.  But first, you should make
+sure that it really is a bug, and that it appears in the latest version
+of Bash.  The latest version of Bash is always available for FTP from
+<ftp://ftp.gnu.org/pub/gnu/bash/>.
+
+   Once you have determined that a bug actually exists, use the
+'bashbug' command to submit a bug report.  If you have a fix, you are
+encouraged to mail that as well!  Suggestions and 'philosophical' bug
+reports may be mailed to <bug-bash@gnu.org> or posted to the Usenet
+newsgroup 'gnu.bash.bug'.
+
+   All bug reports should include:
+   * The version number of Bash.
+   * The hardware and operating system.
+   * The compiler used to compile Bash.
+   * A description of the bug behaviour.
+   * A short script or 'recipe' which exercises the bug and may be used
+     to reproduce it.
+
+'bashbug' inserts the first three items automatically into the template
+it provides for filing a bug report.
+
+   Please send all reports concerning this manual to <bug-bash@gnu.org>.
+
+
+File: bash.info,  Node: Major Differences From The Bourne Shell,  Next: GNU Free Documentation License,  Prev: Reporting Bugs,  Up: Top
+
+Appendix B Major Differences From The Bourne Shell
+**************************************************
+
+Bash implements essentially the same grammar, parameter and variable
+expansion, redirection, and quoting as the Bourne Shell.  Bash uses the
+POSIX standard as the specification of how these features are to be
+implemented.  There are some differences between the traditional Bourne
+shell and Bash; this section quickly details the differences of
+significance.  A number of these differences are explained in greater
+depth in previous sections.  This section uses the version of 'sh'
+included in SVR4.2 (the last version of the historical Bourne shell) as
+the baseline reference.
+
+   * Bash is POSIX-conformant, even where the POSIX specification
+     differs from traditional 'sh' behavior (*note Bash POSIX Mode::).
+
+   * Bash has multi-character invocation options (*note Invoking
+     Bash::).
+
+   * Bash has command-line editing (*note Command Line Editing::) and
+     the 'bind' builtin.
+
+   * Bash provides a programmable word completion mechanism (*note
+     Programmable Completion::), and builtin commands 'complete',
+     'compgen', and 'compopt', to manipulate it.
+
+   * Bash has command history (*note Bash History Facilities::) and the
+     'history' and 'fc' builtins to manipulate it.  The Bash history
+     list maintains timestamp information and uses the value of the
+     'HISTTIMEFORMAT' variable to display it.
+
+   * Bash implements 'csh'-like history expansion (*note History
+     Interaction::).
+
+   * Bash has one-dimensional array variables (*note Arrays::), and the
+     appropriate variable expansions and assignment syntax to use them.
+     Several of the Bash builtins take options to act on arrays.  Bash
+     provides a number of built-in array variables.
+
+   * The '$'...'' quoting syntax, which expands ANSI-C backslash-escaped
+     characters in the text between the single quotes, is supported
+     (*note ANSI-C Quoting::).
+
+   * Bash supports the '$"..."' quoting syntax to do locale-specific
+     translation of the characters between the double quotes.  The '-D',
+     '--dump-strings', and '--dump-po-strings' invocation options list
+     the translatable strings found in a script (*note Locale
+     Translation::).
+
+   * Bash implements the '!' keyword to negate the return value of a
+     pipeline (*note Pipelines::).  Very useful when an 'if' statement
+     needs to act only if a test fails.  The Bash '-o pipefail' option
+     to 'set' will cause a pipeline to return a failure status if any
+     command fails.
+
+   * Bash has the 'time' reserved word and command timing (*note
+     Pipelines::).  The display of the timing statistics may be
+     controlled with the 'TIMEFORMAT' variable.
+
+   * Bash implements the 'for (( EXPR1 ; EXPR2 ; EXPR3 ))' arithmetic
+     for command, similar to the C language (*note Looping
+     Constructs::).
+
+   * Bash includes the 'select' compound command, which allows the
+     generation of simple menus (*note Conditional Constructs::).
+
+   * Bash includes the '[[' compound command, which makes conditional
+     testing part of the shell grammar (*note Conditional Constructs::),
+     including optional regular expression matching.
+
+   * Bash provides optional case-insensitive matching for the 'case' and
+     '[[' constructs.
+
+   * Bash includes brace expansion (*note Brace Expansion::) and tilde
+     expansion (*note Tilde Expansion::).
+
+   * Bash implements command aliases and the 'alias' and 'unalias'
+     builtins (*note Aliases::).
+
+   * Bash provides shell arithmetic, the '((' compound command (*note
+     Conditional Constructs::), and arithmetic expansion (*note Shell
+     Arithmetic::).
+
+   * Variables present in the shell's initial environment are
+     automatically exported to child processes.  The Bourne shell does
+     not normally do this unless the variables are explicitly marked
+     using the 'export' command.
+
+   * Bash supports the '+=' assignment operator, which appends to the
+     value of the variable named on the left hand side.
+
+   * Bash includes the POSIX pattern removal '%', '#', '%%' and '##'
+     expansions to remove leading or trailing substrings from variable
+     values (*note Shell Parameter Expansion::).
+
+   * The expansion '${#xx}', which returns the length of '${xx}', is
+     supported (*note Shell Parameter Expansion::).
+
+   * The expansion '${var:'OFFSET'[:'LENGTH']}', which expands to the
+     substring of 'var''s value of length LENGTH, beginning at OFFSET,
+     is present (*note Shell Parameter Expansion::).
+
+   * The expansion '${var/[/]'PATTERN'[/'REPLACEMENT']}', which matches
+     PATTERN and replaces it with REPLACEMENT in the value of 'var', is
+     available (*note Shell Parameter Expansion::).
+
+   * The expansion '${!PREFIX*}' expansion, which expands to the names
+     of all shell variables whose names begin with PREFIX, is available
+     (*note Shell Parameter Expansion::).
+
+   * Bash has INDIRECT variable expansion using '${!word}' (*note Shell
+     Parameter Expansion::).
+
+   * Bash can expand positional parameters beyond '$9' using '${NUM}'.
+
+   * The POSIX '$()' form of command substitution is implemented (*note
+     Command Substitution::), and preferred to the Bourne shell's '``'
+     (which is also implemented for backwards compatibility).
+
+   * Bash has process substitution (*note Process Substitution::).
+
+   * Bash automatically assigns variables that provide information about
+     the current user ('UID', 'EUID', and 'GROUPS'), the current host
+     ('HOSTTYPE', 'OSTYPE', 'MACHTYPE', and 'HOSTNAME'), and the
+     instance of Bash that is running ('BASH', 'BASH_VERSION', and
+     'BASH_VERSINFO').  *Note Bash Variables::, for details.
+
+   * The 'IFS' variable is used to split only the results of expansion,
+     not all words (*note Word Splitting::).  This closes a longstanding
+     shell security hole.
+
+   * The filename expansion bracket expression code uses '!' and '^' to
+     negate the set of characters between the brackets.  The Bourne
+     shell uses only '!'.
+
+   * Bash implements the full set of POSIX filename expansion operators,
+     including CHARACTER CLASSES, EQUIVALENCE CLASSES, and COLLATING
+     SYMBOLS (*note Filename Expansion::).
+
+   * Bash implements extended pattern matching features when the
+     'extglob' shell option is enabled (*note Pattern Matching::).
+
+   * It is possible to have a variable and a function with the same
+     name; 'sh' does not separate the two name spaces.
+
+   * Bash functions are permitted to have local variables using the
+     'local' builtin, and thus useful recursive functions may be written
+     (*note Bash Builtins::).
+
+   * Variable assignments preceding commands affect only that command,
+     even builtins and functions (*note Environment::).  In 'sh', all
+     variable assignments preceding commands are global unless the
+     command is executed from the file system.
+
+   * Bash performs filename expansion on filenames specified as operands
+     to input and output redirection operators (*note Redirections::).
+
+   * Bash contains the '<>' redirection operator, allowing a file to be
+     opened for both reading and writing, and the '&>' redirection
+     operator, for directing standard output and standard error to the
+     same file (*note Redirections::).
+
+   * Bash includes the '<<<' redirection operator, allowing a string to
+     be used as the standard input to a command.
+
+   * Bash implements the '[n]<&WORD' and '[n]>&WORD' redirection
+     operators, which move one file descriptor to another.
+
+   * Bash treats a number of filenames specially when they are used in
+     redirection operators (*note Redirections::).
+
+   * Bash can open network connections to arbitrary machines and
+     services with the redirection operators (*note Redirections::).
+
+   * The 'noclobber' option is available to avoid overwriting existing
+     files with output redirection (*note The Set Builtin::).  The '>|'
+     redirection operator may be used to override 'noclobber'.
+
+   * The Bash 'cd' and 'pwd' builtins (*note Bourne Shell Builtins::)
+     each take '-L' and '-P' options to switch between logical and
+     physical modes.
+
+   * Bash allows a function to override a builtin with the same name,
+     and provides access to that builtin's functionality within the
+     function via the 'builtin' and 'command' builtins (*note Bash
+     Builtins::).
+
+   * The 'command' builtin allows selective disabling of functions when
+     command lookup is performed (*note Bash Builtins::).
+
+   * Individual builtins may be enabled or disabled using the 'enable'
+     builtin (*note Bash Builtins::).
+
+   * The Bash 'exec' builtin takes additional options that allow users
+     to control the contents of the environment passed to the executed
+     command, and what the zeroth argument to the command is to be
+     (*note Bourne Shell Builtins::).
+
+   * Shell functions may be exported to children via the environment
+     using 'export -f' (*note Shell Functions::).
+
+   * The Bash 'export', 'readonly', and 'declare' builtins can take a
+     '-f' option to act on shell functions, a '-p' option to display
+     variables with various attributes set in a format that can be used
+     as shell input, a '-n' option to remove various variable
+     attributes, and 'name=value' arguments to set variable attributes
+     and values simultaneously.
+
+   * The Bash 'hash' builtin allows a name to be associated with an
+     arbitrary filename, even when that filename cannot be found by
+     searching the '$PATH', using 'hash -p' (*note Bourne Shell
+     Builtins::).
+
+   * Bash includes a 'help' builtin for quick reference to shell
+     facilities (*note Bash Builtins::).
+
+   * The 'printf' builtin is available to display formatted output
+     (*note Bash Builtins::).
+
+   * The Bash 'read' builtin (*note Bash Builtins::) will read a line
+     ending in '\' with the '-r' option, and will use the 'REPLY'
+     variable as a default if no non-option arguments are supplied.  The
+     Bash 'read' builtin also accepts a prompt string with the '-p'
+     option and will use Readline to obtain the line when given the '-e'
+     option.  The 'read' builtin also has additional options to control
+     input: the '-s' option will turn off echoing of input characters as
+     they are read, the '-t' option will allow 'read' to time out if
+     input does not arrive within a specified number of seconds, the
+     '-n' option will allow reading only a specified number of
+     characters rather than a full line, and the '-d' option will read
+     until a particular character rather than newline.
+
+   * The 'return' builtin may be used to abort execution of scripts
+     executed with the '.' or 'source' builtins (*note Bourne Shell
+     Builtins::).
+
+   * Bash includes the 'shopt' builtin, for finer control of shell
+     optional capabilities (*note The Shopt Builtin::), and allows these
+     options to be set and unset at shell invocation (*note Invoking
+     Bash::).
+
+   * Bash has much more optional behavior controllable with the 'set'
+     builtin (*note The Set Builtin::).
+
+   * The '-x' ('xtrace') option displays commands other than simple
+     commands when performing an execution trace (*note The Set
+     Builtin::).
+
+   * The 'test' builtin (*note Bourne Shell Builtins::) is slightly
+     different, as it implements the POSIX algorithm, which specifies
+     the behavior based on the number of arguments.
+
+   * Bash includes the 'caller' builtin, which displays the context of
+     any active subroutine call (a shell function or a script executed
+     with the '.' or 'source' builtins).  This supports the bash
+     debugger.
+
+   * The 'trap' builtin (*note Bourne Shell Builtins::) allows a 'DEBUG'
+     pseudo-signal specification, similar to 'EXIT'.  Commands specified
+     with a 'DEBUG' trap are executed before every simple command, 'for'
+     command, 'case' command, 'select' command, every arithmetic 'for'
+     command, and before the first command executes in a shell function.
+     The 'DEBUG' trap is not inherited by shell functions unless the
+     function has been given the 'trace' attribute or the 'functrace'
+     option has been enabled using the 'shopt' builtin.  The 'extdebug'
+     shell option has additional effects on the 'DEBUG' trap.
+
+     The 'trap' builtin (*note Bourne Shell Builtins::) allows an 'ERR'
+     pseudo-signal specification, similar to 'EXIT' and 'DEBUG'.
+     Commands specified with an 'ERR' trap are executed after a simple
+     command fails, with a few exceptions.  The 'ERR' trap is not
+     inherited by shell functions unless the '-o errtrace' option to the
+     'set' builtin is enabled.
+
+     The 'trap' builtin (*note Bourne Shell Builtins::) allows a
+     'RETURN' pseudo-signal specification, similar to 'EXIT' and
+     'DEBUG'.  Commands specified with an 'RETURN' trap are executed
+     before execution resumes after a shell function or a shell script
+     executed with '.' or 'source' returns.  The 'RETURN' trap is not
+     inherited by shell functions unless the function has been given the
+     'trace' attribute or the 'functrace' option has been enabled using
+     the 'shopt' builtin.
+
+   * The Bash 'type' builtin is more extensive and gives more
+     information about the names it finds (*note Bash Builtins::).
+
+   * The Bash 'umask' builtin permits a '-p' option to cause the output
+     to be displayed in the form of a 'umask' command that may be reused
+     as input (*note Bourne Shell Builtins::).
+
+   * Bash implements a 'csh'-like directory stack, and provides the
+     'pushd', 'popd', and 'dirs' builtins to manipulate it (*note The
+     Directory Stack::).  Bash also makes the directory stack visible as
+     the value of the 'DIRSTACK' shell variable.
+
+   * Bash interprets special backslash-escaped characters in the prompt
+     strings when interactive (*note Controlling the Prompt::).
+
+   * The Bash restricted mode is more useful (*note The Restricted
+     Shell::); the SVR4.2 shell restricted mode is too limited.
+
+   * The 'disown' builtin can remove a job from the internal shell job
+     table (*note Job Control Builtins::) or suppress the sending of
+     'SIGHUP' to a job when the shell exits as the result of a 'SIGHUP'.
+
+   * Bash includes a number of features to support a separate debugger
+     for shell scripts.
+
+   * The SVR4.2 shell has two privilege-related builtins ('mldmode' and
+     'priv') not present in Bash.
+
+   * Bash does not have the 'stop' or 'newgrp' builtins.
+
+   * Bash does not use the 'SHACCT' variable or perform shell
+     accounting.
+
+   * The SVR4.2 'sh' uses a 'TIMEOUT' variable like Bash uses 'TMOUT'.
+
+More features unique to Bash may be found in *note Bash Features::.
+
+B.1 Implementation Differences From The SVR4.2 Shell
+====================================================
+
+Since Bash is a completely new implementation, it does not suffer from
+many of the limitations of the SVR4.2 shell.  For instance:
+
+   * Bash does not fork a subshell when redirecting into or out of a
+     shell control structure such as an 'if' or 'while' statement.
+
+   * Bash does not allow unbalanced quotes.  The SVR4.2 shell will
+     silently insert a needed closing quote at 'EOF' under certain
+     circumstances.  This can be the cause of some hard-to-find errors.
+
+   * The SVR4.2 shell uses a baroque memory management scheme based on
+     trapping 'SIGSEGV'.  If the shell is started from a process with
+     'SIGSEGV' blocked (e.g., by using the 'system()' C library function
+     call), it misbehaves badly.
+
+   * In a questionable attempt at security, the SVR4.2 shell, when
+     invoked without the '-p' option, will alter its real and effective
+     UID and GID if they are less than some magic threshold value,
+     commonly 100.  This can lead to unexpected results.
+
+   * The SVR4.2 shell does not allow users to trap 'SIGSEGV', 'SIGALRM',
+     or 'SIGCHLD'.
+
+   * The SVR4.2 shell does not allow the 'IFS', 'MAILCHECK', 'PATH',
+     'PS1', or 'PS2' variables to be unset.
+
+   * The SVR4.2 shell treats '^' as the undocumented equivalent of '|'.
+
+   * Bash allows multiple option arguments when it is invoked ('-x -v');
+     the SVR4.2 shell allows only one option argument ('-xv').  In fact,
+     some versions of the shell dump core if the second argument begins
+     with a '-'.
+
+   * The SVR4.2 shell exits a script if any builtin fails; Bash exits a
+     script only if one of the POSIX special builtins fails, and only
+     for certain failures, as enumerated in the POSIX standard.
+
+   * The SVR4.2 shell behaves differently when invoked as 'jsh' (it
+     turns on job control).
+
+
+File: bash.info,  Node: GNU Free Documentation License,  Next: Indexes,  Prev: Major Differences From The Bourne Shell,  Up: Top
+
+Appendix C GNU Free Documentation License
+*****************************************
+
+                     Version 1.3, 3 November 2008
+
+     Copyright (C) 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc.
+     <http://fsf.org/>
+
+     Everyone is permitted to copy and distribute verbatim copies
+     of this license document, but changing it is not allowed.
+
+  0. PREAMBLE
+
+     The purpose of this License is to make a manual, textbook, or other
+     functional and useful document "free" in the sense of freedom: to
+     assure everyone the effective freedom to copy and redistribute it,
+     with or without modifying it, either commercially or
+     noncommercially.  Secondarily, this License preserves for the
+     author and publisher a way to get credit for their work, while not
+     being considered responsible for modifications made by others.
+
+     This License is a kind of "copyleft", which means that derivative
+     works of the document must themselves be free in the same sense.
+     It complements the GNU General Public License, which is a copyleft
+     license designed for free software.
+
+     We have designed this License in order to use it for manuals for
+     free software, because free software needs free documentation: a
+     free program should come with manuals providing the same freedoms
+     that the software does.  But this License is not limited to
+     software manuals; it can be used for any textual work, regardless
+     of subject matter or whether it is published as a printed book.  We
+     recommend this License principally for works whose purpose is
+     instruction or reference.
+
+  1. APPLICABILITY AND DEFINITIONS
+
+     This License applies to any manual or other work, in any medium,
+     that contains a notice placed by the copyright holder saying it can
+     be distributed under the terms of this License.  Such a notice
+     grants a world-wide, royalty-free license, unlimited in duration,
+     to use that work under the conditions stated herein.  The
+     "Document", below, refers to any such manual or work.  Any member
+     of the public is a licensee, and is addressed as "you".  You accept
+     the license if you copy, modify or distribute the work in a way
+     requiring permission under copyright law.
+
+     A "Modified Version" of the Document means any work containing the
+     Document or a portion of it, either copied verbatim, or with
+     modifications and/or translated into another language.
+
+     A "Secondary Section" is a named appendix or a front-matter section
+     of the Document that deals exclusively with the relationship of the
+     publishers or authors of the Document to the Document's overall
+     subject (or to related matters) and contains nothing that could
+     fall directly within that overall subject.  (Thus, if the Document
+     is in part a textbook of mathematics, a Secondary Section may not
+     explain any mathematics.)  The relationship could be a matter of
+     historical connection with the subject or with related matters, or
+     of legal, commercial, philosophical, ethical or political position
+     regarding them.
+
+     The "Invariant Sections" are certain Secondary Sections whose
+     titles are designated, as being those of Invariant Sections, in the
+     notice that says that the Document is released under this License.
+     If a section does not fit the above definition of Secondary then it
+     is not allowed to be designated as Invariant.  The Document may
+     contain zero Invariant Sections.  If the Document does not identify
+     any Invariant Sections then there are none.
+
+     The "Cover Texts" are certain short passages of text that are
+     listed, as Front-Cover Texts or Back-Cover Texts, in the notice
+     that says that the Document is released under this License.  A
+     Front-Cover Text may be at most 5 words, and a Back-Cover Text may
+     be at most 25 words.
+
+     A "Transparent" copy of the Document means a machine-readable copy,
+     represented in a format whose specification is available to the
+     general public, that is suitable for revising the document
+     straightforwardly with generic text editors or (for images composed
+     of pixels) generic paint programs or (for drawings) some widely
+     available drawing editor, and that is suitable for input to text
+     formatters or for automatic translation to a variety of formats
+     suitable for input to text formatters.  A copy made in an otherwise
+     Transparent file format whose markup, or absence of markup, has
+     been arranged to thwart or discourage subsequent modification by
+     readers is not Transparent.  An image format is not Transparent if
+     used for any substantial amount of text.  A copy that is not
+     "Transparent" is called "Opaque".
+
+     Examples of suitable formats for Transparent copies include plain
+     ASCII without markup, Texinfo input format, LaTeX input format,
+     SGML or XML using a publicly available DTD, and standard-conforming
+     simple HTML, PostScript or PDF designed for human modification.
+     Examples of transparent image formats include PNG, XCF and JPG.
+     Opaque formats include proprietary formats that can be read and
+     edited only by proprietary word processors, SGML or XML for which
+     the DTD and/or processing tools are not generally available, and
+     the machine-generated HTML, PostScript or PDF produced by some word
+     processors for output purposes only.
+
+     The "Title Page" means, for a printed book, the title page itself,
+     plus such following pages as are needed to hold, legibly, the
+     material this License requires to appear in the title page.  For
+     works in formats which do not have any title page as such, "Title
+     Page" means the text near the most prominent appearance of the
+     work's title, preceding the beginning of the body of the text.
+
+     The "publisher" means any person or entity that distributes copies
+     of the Document to the public.
+
+     A section "Entitled XYZ" means a named subunit of the Document
+     whose title either is precisely XYZ or contains XYZ in parentheses
+     following text that translates XYZ in another language.  (Here XYZ
+     stands for a specific section name mentioned below, such as
+     "Acknowledgements", "Dedications", "Endorsements", or "History".)
+     To "Preserve the Title" of such a section when you modify the
+     Document means that it remains a section "Entitled XYZ" according
+     to this definition.
+
+     The Document may include Warranty Disclaimers next to the notice
+     which states that this License applies to the Document.  These
+     Warranty Disclaimers are considered to be included by reference in
+     this License, but only as regards disclaiming warranties: any other
+     implication that these Warranty Disclaimers may have is void and
+     has no effect on the meaning of this License.
+
+  2. VERBATIM COPYING
+
+     You may copy and distribute the Document in any medium, either
+     commercially or noncommercially, provided that this License, the
+     copyright notices, and the license notice saying this License
+     applies to the Document are reproduced in all copies, and that you
+     add no other conditions whatsoever to those of this License.  You
+     may not use technical measures to obstruct or control the reading
+     or further copying of the copies you make or distribute.  However,
+     you may accept compensation in exchange for copies.  If you
+     distribute a large enough number of copies you must also follow the
+     conditions in section 3.
+
+     You may also lend copies, under the same conditions stated above,
+     and you may publicly display copies.
+
+  3. COPYING IN QUANTITY
+
+     If you publish printed copies (or copies in media that commonly
+     have printed covers) of the Document, numbering more than 100, and
+     the Document's license notice requires Cover Texts, you must
+     enclose the copies in covers that carry, clearly and legibly, all
+     these Cover Texts: Front-Cover Texts on the front cover, and
+     Back-Cover Texts on the back cover.  Both covers must also clearly
+     and legibly identify you as the publisher of these copies.  The
+     front cover must present the full title with all words of the title
+     equally prominent and visible.  You may add other material on the
+     covers in addition.  Copying with changes limited to the covers, as
+     long as they preserve the title of the Document and satisfy these
+     conditions, can be treated as verbatim copying in other respects.
+
+     If the required texts for either cover are too voluminous to fit
+     legibly, you should put the first ones listed (as many as fit
+     reasonably) on the actual cover, and continue the rest onto
+     adjacent pages.
+
+     If you publish or distribute Opaque copies of the Document
+     numbering more than 100, you must either include a machine-readable
+     Transparent copy along with each Opaque copy, or state in or with
+     each Opaque copy a computer-network location from which the general
+     network-using public has access to download using public-standard
+     network protocols a complete Transparent copy of the Document, free
+     of added material.  If you use the latter option, you must take
+     reasonably prudent steps, when you begin distribution of Opaque
+     copies in quantity, to ensure that this Transparent copy will
+     remain thus accessible at the stated location until at least one
+     year after the last time you distribute an Opaque copy (directly or
+     through your agents or retailers) of that edition to the public.
+
+     It is requested, but not required, that you contact the authors of
+     the Document well before redistributing any large number of copies,
+     to give them a chance to provide you with an updated version of the
+     Document.
+
+  4. MODIFICATIONS
+
+     You may copy and distribute a Modified Version of the Document
+     under the conditions of sections 2 and 3 above, provided that you
+     release the Modified Version under precisely this License, with the
+     Modified Version filling the role of the Document, thus licensing
+     distribution and modification of the Modified Version to whoever
+     possesses a copy of it.  In addition, you must do these things in
+     the Modified Version:
+
+       A. Use in the Title Page (and on the covers, if any) a title
+          distinct from that of the Document, and from those of previous
+          versions (which should, if there were any, be listed in the
+          History section of the Document).  You may use the same title
+          as a previous version if the original publisher of that
+          version gives permission.
+
+       B. List on the Title Page, as authors, one or more persons or
+          entities responsible for authorship of the modifications in
+          the Modified Version, together with at least five of the
+          principal authors of the Document (all of its principal
+          authors, if it has fewer than five), unless they release you
+          from this requirement.
+
+       C. State on the Title page the name of the publisher of the
+          Modified Version, as the publisher.
+
+       D. Preserve all the copyright notices of the Document.
+
+       E. Add an appropriate copyright notice for your modifications
+          adjacent to the other copyright notices.
+
+       F. Include, immediately after the copyright notices, a license
+          notice giving the public permission to use the Modified
+          Version under the terms of this License, in the form shown in
+          the Addendum below.
+
+       G. Preserve in that license notice the full lists of Invariant
+          Sections and required Cover Texts given in the Document's
+          license notice.
+
+       H. Include an unaltered copy of this License.
+
+       I. Preserve the section Entitled "History", Preserve its Title,
+          and add to it an item stating at least the title, year, new
+          authors, and publisher of the Modified Version as given on the
+          Title Page.  If there is no section Entitled "History" in the
+          Document, create one stating the title, year, authors, and
+          publisher of the Document as given on its Title Page, then add
+          an item describing the Modified Version as stated in the
+          previous sentence.
+
+       J. Preserve the network location, if any, given in the Document
+          for public access to a Transparent copy of the Document, and
+          likewise the network locations given in the Document for
+          previous versions it was based on.  These may be placed in the
+          "History" section.  You may omit a network location for a work
+          that was published at least four years before the Document
+          itself, or if the original publisher of the version it refers
+          to gives permission.
+
+       K. For any section Entitled "Acknowledgements" or "Dedications",
+          Preserve the Title of the section, and preserve in the section
+          all the substance and tone of each of the contributor
+          acknowledgements and/or dedications given therein.
+
+       L. Preserve all the Invariant Sections of the Document, unaltered
+          in their text and in their titles.  Section numbers or the
+          equivalent are not considered part of the section titles.
+
+       M. Delete any section Entitled "Endorsements".  Such a section
+          may not be included in the Modified Version.
+
+       N. Do not retitle any existing section to be Entitled
+          "Endorsements" or to conflict in title with any Invariant
+          Section.
+
+       O. Preserve any Warranty Disclaimers.
+
+     If the Modified Version includes new front-matter sections or
+     appendices that qualify as Secondary Sections and contain no
+     material copied from the Document, you may at your option designate
+     some or all of these sections as invariant.  To do this, add their
+     titles to the list of Invariant Sections in the Modified Version's
+     license notice.  These titles must be distinct from any other
+     section titles.
+
+     You may add a section Entitled "Endorsements", provided it contains
+     nothing but endorsements of your Modified Version by various
+     parties--for example, statements of peer review or that the text
+     has been approved by an organization as the authoritative
+     definition of a standard.
+
+     You may add a passage of up to five words as a Front-Cover Text,
+     and a passage of up to 25 words as a Back-Cover Text, to the end of
+     the list of Cover Texts in the Modified Version.  Only one passage
+     of Front-Cover Text and one of Back-Cover Text may be added by (or
+     through arrangements made by) any one entity.  If the Document
+     already includes a cover text for the same cover, previously added
+     by you or by arrangement made by the same entity you are acting on
+     behalf of, you may not add another; but you may replace the old
+     one, on explicit permission from the previous publisher that added
+     the old one.
+
+     The author(s) and publisher(s) of the Document do not by this
+     License give permission to use their names for publicity for or to
+     assert or imply endorsement of any Modified Version.
+
+  5. COMBINING DOCUMENTS
+
+     You may combine the Document with other documents released under
+     this License, under the terms defined in section 4 above for
+     modified versions, provided that you include in the combination all
+     of the Invariant Sections of all of the original documents,
+     unmodified, and list them all as Invariant Sections of your
+     combined work in its license notice, and that you preserve all
+     their Warranty Disclaimers.
+
+     The combined work need only contain one copy of this License, and
+     multiple identical Invariant Sections may be replaced with a single
+     copy.  If there are multiple Invariant Sections with the same name
+     but different contents, make the title of each such section unique
+     by adding at the end of it, in parentheses, the name of the
+     original author or publisher of that section if known, or else a
+     unique number.  Make the same adjustment to the section titles in
+     the list of Invariant Sections in the license notice of the
+     combined work.
+
+     In the combination, you must combine any sections Entitled
+     "History" in the various original documents, forming one section
+     Entitled "History"; likewise combine any sections Entitled
+     "Acknowledgements", and any sections Entitled "Dedications".  You
+     must delete all sections Entitled "Endorsements."
+
+  6. COLLECTIONS OF DOCUMENTS
+
+     You may make a collection consisting of the Document and other
+     documents released under this License, and replace the individual
+     copies of this License in the various documents with a single copy
+     that is included in the collection, provided that you follow the
+     rules of this License for verbatim copying of each of the documents
+     in all other respects.
+
+     You may extract a single document from such a collection, and
+     distribute it individually under this License, provided you insert
+     a copy of this License into the extracted document, and follow this
+     License in all other respects regarding verbatim copying of that
+     document.
+
+  7. AGGREGATION WITH INDEPENDENT WORKS
+
+     A compilation of the Document or its derivatives with other
+     separate and independent documents or works, in or on a volume of a
+     storage or distribution medium, is called an "aggregate" if the
+     copyright resulting from the compilation is not used to limit the
+     legal rights of the compilation's users beyond what the individual
+     works permit.  When the Document is included in an aggregate, this
+     License does not apply to the other works in the aggregate which
+     are not themselves derivative works of the Document.
+
+     If the Cover Text requirement of section 3 is applicable to these
+     copies of the Document, then if the Document is less than one half
+     of the entire aggregate, the Document's Cover Texts may be placed
+     on covers that bracket the Document within the aggregate, or the
+     electronic equivalent of covers if the Document is in electronic
+     form.  Otherwise they must appear on printed covers that bracket
+     the whole aggregate.
+
+  8. TRANSLATION
+
+     Translation is considered a kind of modification, so you may
+     distribute translations of the Document under the terms of section
+     4.  Replacing Invariant Sections with translations requires special
+     permission from their copyright holders, but you may include
+     translations of some or all Invariant Sections in addition to the
+     original versions of these Invariant Sections.  You may include a
+     translation of this License, and all the license notices in the
+     Document, and any Warranty Disclaimers, provided that you also
+     include the original English version of this License and the
+     original versions of those notices and disclaimers.  In case of a
+     disagreement between the translation and the original version of
+     this License or a notice or disclaimer, the original version will
+     prevail.
+
+     If a section in the Document is Entitled "Acknowledgements",
+     "Dedications", or "History", the requirement (section 4) to
+     Preserve its Title (section 1) will typically require changing the
+     actual title.
+
+  9. TERMINATION
+
+     You may not copy, modify, sublicense, or distribute the Document
+     except as expressly provided under this License.  Any attempt
+     otherwise to copy, modify, sublicense, or distribute it is void,
+     and will automatically terminate your rights under this License.
+
+     However, if you cease all violation of this License, then your
+     license from a particular copyright holder is reinstated (a)
+     provisionally, unless and until the copyright holder explicitly and
+     finally terminates your license, and (b) permanently, if the
+     copyright holder fails to notify you of the violation by some
+     reasonable means prior to 60 days after the cessation.
+
+     Moreover, your license from a particular copyright holder is
+     reinstated permanently if the copyright holder notifies you of the
+     violation by some reasonable means, this is the first time you have
+     received notice of violation of this License (for any work) from
+     that copyright holder, and you cure the violation prior to 30 days
+     after your receipt of the notice.
+
+     Termination of your rights under this section does not terminate
+     the licenses of parties who have received copies or rights from you
+     under this License.  If your rights have been terminated and not
+     permanently reinstated, receipt of a copy of some or all of the
+     same material does not give you any rights to use it.
+
+  10. FUTURE REVISIONS OF THIS LICENSE
+
+     The Free Software Foundation may publish new, revised versions of
+     the GNU Free Documentation License from time to time.  Such new
+     versions will be similar in spirit to the present version, but may
+     differ in detail to address new problems or concerns.  See
+     <http://www.gnu.org/copyleft/>.
+
+     Each version of the License is given a distinguishing version
+     number.  If the Document specifies that a particular numbered
+     version of this License "or any later version" applies to it, you
+     have the option of following the terms and conditions either of
+     that specified version or of any later version that has been
+     published (not as a draft) by the Free Software Foundation.  If the
+     Document does not specify a version number of this License, you may
+     choose any version ever published (not as a draft) by the Free
+     Software Foundation.  If the Document specifies that a proxy can
+     decide which future versions of this License can be used, that
+     proxy's public statement of acceptance of a version permanently
+     authorizes you to choose that version for the Document.
+
+  11. RELICENSING
+
+     "Massive Multiauthor Collaboration Site" (or "MMC Site") means any
+     World Wide Web server that publishes copyrightable works and also
+     provides prominent facilities for anybody to edit those works.  A
+     public wiki that anybody can edit is an example of such a server.
+     A "Massive Multiauthor Collaboration" (or "MMC") contained in the
+     site means any set of copyrightable works thus published on the MMC
+     site.
+
+     "CC-BY-SA" means the Creative Commons Attribution-Share Alike 3.0
+     license published by Creative Commons Corporation, a not-for-profit
+     corporation with a principal place of business in San Francisco,
+     California, as well as future copyleft versions of that license
+     published by that same organization.
+
+     "Incorporate" means to publish or republish a Document, in whole or
+     in part, as part of another Document.
+
+     An MMC is "eligible for relicensing" if it is licensed under this
+     License, and if all works that were first published under this
+     License somewhere other than this MMC, and subsequently
+     incorporated in whole or in part into the MMC, (1) had no cover
+     texts or invariant sections, and (2) were thus incorporated prior
+     to November 1, 2008.
+
+     The operator of an MMC Site may republish an MMC contained in the
+     site under CC-BY-SA on the same site at any time before August 1,
+     2009, provided the MMC is eligible for relicensing.
+
+ADDENDUM: How to use this License for your documents
+====================================================
+
+To use this License in a document you have written, include a copy of
+the License in the document and put the following copyright and license
+notices just after the title page:
+
+       Copyright (C)  YEAR  YOUR NAME.
+       Permission is granted to copy, distribute and/or modify this document
+       under the terms of the GNU Free Documentation License, Version 1.3
+       or any later version published by the Free Software Foundation;
+       with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
+       Texts.  A copy of the license is included in the section entitled ``GNU
+       Free Documentation License''.
+
+   If you have Invariant Sections, Front-Cover Texts and Back-Cover
+Texts, replace the "with...Texts."  line with this:
+
+         with the Invariant Sections being LIST THEIR TITLES, with
+         the Front-Cover Texts being LIST, and with the Back-Cover Texts
+         being LIST.
+
+   If you have Invariant Sections without Cover Texts, or some other
+combination of the three, merge those two alternatives to suit the
+situation.
+
+   If your document contains nontrivial examples of program code, we
+recommend releasing these examples in parallel under your choice of free
+software license, such as the GNU General Public License, to permit
+their use in free software.
+
+
+File: bash.info,  Node: Indexes,  Prev: GNU Free Documentation License,  Up: Top
+
+Appendix D Indexes
+******************
+
+* Menu:
+
+* Builtin Index::		Index of Bash builtin commands.
+* Reserved Word Index::		Index of Bash reserved words.
+* Variable Index::		Quick reference helps you find the
+				variable you want.
+* Function Index::		Index of bindable Readline functions.
+* Concept Index::		General index for concepts described in
+				this manual.
+
+
+File: bash.info,  Node: Builtin Index,  Next: Reserved Word Index,  Up: Indexes
+
+D.1 Index of Shell Builtin Commands
+===================================
+
+
+* Menu:
+
+* .:                                     Bourne Shell Builtins.
+                                                              (line  17)
+* ::                                     Bourne Shell Builtins.
+                                                              (line  11)
+* [:                                     Bourne Shell Builtins.
+                                                              (line 270)
+* alias:                                 Bash Builtins.       (line  11)
+* bg:                                    Job Control Builtins.
+                                                              (line   7)
+* bind:                                  Bash Builtins.       (line  21)
+* break:                                 Bourne Shell Builtins.
+                                                              (line  36)
+* builtin:                               Bash Builtins.       (line 104)
+* caller:                                Bash Builtins.       (line 113)
+* cd:                                    Bourne Shell Builtins.
+                                                              (line  44)
+* command:                               Bash Builtins.       (line 130)
+* compgen:                               Programmable Completion Builtins.
+                                                              (line  12)
+* complete:                              Programmable Completion Builtins.
+                                                              (line  30)
+* compopt:                               Programmable Completion Builtins.
+                                                              (line 237)
+* continue:                              Bourne Shell Builtins.
+                                                              (line  85)
+* declare:                               Bash Builtins.       (line 150)
+* dirs:                                  Directory Stack Builtins.
+                                                              (line   7)
+* disown:                                Job Control Builtins.
+                                                              (line 101)
+* echo:                                  Bash Builtins.       (line 253)
+* enable:                                Bash Builtins.       (line 302)
+* eval:                                  Bourne Shell Builtins.
+                                                              (line  94)
+* exec:                                  Bourne Shell Builtins.
+                                                              (line 102)
+* exit:                                  Bourne Shell Builtins.
+                                                              (line 120)
+* export:                                Bourne Shell Builtins.
+                                                              (line 127)
+* fc:                                    Bash History Builtins.
+                                                              (line  10)
+* fg:                                    Job Control Builtins.
+                                                              (line  17)
+* getopts:                               Bourne Shell Builtins.
+                                                              (line 143)
+* hash:                                  Bourne Shell Builtins.
+                                                              (line 187)
+* help:                                  Bash Builtins.       (line 331)
+* history:                               Bash History Builtins.
+                                                              (line  46)
+* jobs:                                  Job Control Builtins.
+                                                              (line  27)
+* kill:                                  Job Control Builtins.
+                                                              (line  58)
+* let:                                   Bash Builtins.       (line 350)
+* local:                                 Bash Builtins.       (line 358)
+* logout:                                Bash Builtins.       (line 374)
+* mapfile:                               Bash Builtins.       (line 379)
+* popd:                                  Directory Stack Builtins.
+                                                              (line  35)
+* printf:                                Bash Builtins.       (line 425)
+* pushd:                                 Directory Stack Builtins.
+                                                              (line  53)
+* pwd:                                   Bourne Shell Builtins.
+                                                              (line 207)
+* read:                                  Bash Builtins.       (line 474)
+* readarray:                             Bash Builtins.       (line 570)
+* readonly:                              Bourne Shell Builtins.
+                                                              (line 217)
+* return:                                Bourne Shell Builtins.
+                                                              (line 236)
+* set:                                   The Set Builtin.     (line  11)
+* shift:                                 Bourne Shell Builtins.
+                                                              (line 257)
+* shopt:                                 The Shopt Builtin.   (line   9)
+* source:                                Bash Builtins.       (line 579)
+* suspend:                               Job Control Builtins.
+                                                              (line 113)
+* test:                                  Bourne Shell Builtins.
+                                                              (line 270)
+* times:                                 Bourne Shell Builtins.
+                                                              (line 349)
+* trap:                                  Bourne Shell Builtins.
+                                                              (line 355)
+* type:                                  Bash Builtins.       (line 584)
+* typeset:                               Bash Builtins.       (line 616)
+* ulimit:                                Bash Builtins.       (line 622)
+* umask:                                 Bourne Shell Builtins.
+                                                              (line 404)
+* unalias:                               Bash Builtins.       (line 728)
+* unset:                                 Bourne Shell Builtins.
+                                                              (line 422)
+* wait:                                  Job Control Builtins.
+                                                              (line  76)
+
+
+File: bash.info,  Node: Reserved Word Index,  Next: Variable Index,  Prev: Builtin Index,  Up: Indexes
+
+D.2 Index of Shell Reserved Words
+=================================
+
+
+* Menu:
+
+* !:                                     Pipelines.           (line   9)
+* [[:                                    Conditional Constructs.
+                                                              (line 125)
+* ]]:                                    Conditional Constructs.
+                                                              (line 125)
+* {:                                     Command Grouping.    (line  21)
+* }:                                     Command Grouping.    (line  21)
+* case:                                  Conditional Constructs.
+                                                              (line  28)
+* do:                                    Looping Constructs.  (line  12)
+* done:                                  Looping Constructs.  (line  12)
+* elif:                                  Conditional Constructs.
+                                                              (line   7)
+* else:                                  Conditional Constructs.
+                                                              (line   7)
+* esac:                                  Conditional Constructs.
+                                                              (line  28)
+* fi:                                    Conditional Constructs.
+                                                              (line   7)
+* for:                                   Looping Constructs.  (line  32)
+* function:                              Shell Functions.     (line  13)
+* if:                                    Conditional Constructs.
+                                                              (line   7)
+* in:                                    Conditional Constructs.
+                                                              (line  28)
+* select:                                Conditional Constructs.
+                                                              (line  83)
+* then:                                  Conditional Constructs.
+                                                              (line   7)
+* time:                                  Pipelines.           (line   9)
+* until:                                 Looping Constructs.  (line  12)
+* while:                                 Looping Constructs.  (line  22)
+
+
+File: bash.info,  Node: Variable Index,  Next: Function Index,  Prev: Reserved Word Index,  Up: Indexes
+
+D.3 Parameter and Variable Index
+================================
+
+
+* Menu:
+
+* !:                                     Special Parameters.  (line  56)
+* #:                                     Special Parameters.  (line  39)
+* $:                                     Special Parameters.  (line  51)
+* $!:                                    Special Parameters.  (line  57)
+* $#:                                    Special Parameters.  (line  40)
+* $$:                                    Special Parameters.  (line  52)
+* $*:                                    Special Parameters.  (line  10)
+* $-:                                    Special Parameters.  (line  47)
+* $0:                                    Special Parameters.  (line  62)
+* $?:                                    Special Parameters.  (line  43)
+* $@:                                    Special Parameters.  (line  23)
+* $_:                                    Bash Variables.      (line  14)
+* *:                                     Special Parameters.  (line   9)
+* -:                                     Special Parameters.  (line  46)
+* 0:                                     Special Parameters.  (line  61)
+* ?:                                     Special Parameters.  (line  42)
+* @:                                     Special Parameters.  (line  22)
+* _:                                     Bash Variables.      (line  13)
+* auto_resume:                           Job Control Variables.
+                                                              (line   6)
+* BASH:                                  Bash Variables.      (line  23)
+* BASHOPTS:                              Bash Variables.      (line  26)
+* BASHPID:                               Bash Variables.      (line  35)
+* BASH_ALIASES:                          Bash Variables.      (line  42)
+* BASH_ARGC:                             Bash Variables.      (line  51)
+* BASH_ARGV:                             Bash Variables.      (line  64)
+* BASH_ARGV0:                            Bash Variables.      (line  76)
+* BASH_CMDS:                             Bash Variables.      (line  84)
+* BASH_COMMAND:                          Bash Variables.      (line  93)
+* BASH_COMPAT:                           Bash Variables.      (line 100)
+* BASH_ENV:                              Bash Variables.      (line 116)
+* BASH_EXECUTION_STRING:                 Bash Variables.      (line 122)
+* BASH_LINENO:                           Bash Variables.      (line 125)
+* BASH_LOADABLES_PATH:                   Bash Variables.      (line 133)
+* BASH_REMATCH:                          Bash Variables.      (line 137)
+* BASH_SOURCE:                           Bash Variables.      (line 145)
+* BASH_SUBSHELL:                         Bash Variables.      (line 152)
+* BASH_VERSINFO:                         Bash Variables.      (line 158)
+* BASH_VERSION:                          Bash Variables.      (line 181)
+* BASH_XTRACEFD:                         Bash Variables.      (line 184)
+* bell-style:                            Readline Init File Syntax.
+                                                              (line  38)
+* bind-tty-special-chars:                Readline Init File Syntax.
+                                                              (line  45)
+* blink-matching-paren:                  Readline Init File Syntax.
+                                                              (line  50)
+* CDPATH:                                Bourne Shell Variables.
+                                                              (line   9)
+* CHILD_MAX:                             Bash Variables.      (line 195)
+* colored-completion-prefix:             Readline Init File Syntax.
+                                                              (line  55)
+* colored-stats:                         Readline Init File Syntax.
+                                                              (line  62)
+* COLUMNS:                               Bash Variables.      (line 202)
+* comment-begin:                         Readline Init File Syntax.
+                                                              (line  68)
+* completion-display-width:              Readline Init File Syntax.
+                                                              (line  73)
+* completion-ignore-case:                Readline Init File Syntax.
+                                                              (line  80)
+* completion-map-case:                   Readline Init File Syntax.
+                                                              (line  85)
+* completion-prefix-display-length:      Readline Init File Syntax.
+                                                              (line  91)
+* completion-query-items:                Readline Init File Syntax.
+                                                              (line  98)
+* COMPREPLY:                             Bash Variables.      (line 254)
+* COMP_CWORD:                            Bash Variables.      (line 208)
+* COMP_KEY:                              Bash Variables.      (line 237)
+* COMP_LINE:                             Bash Variables.      (line 214)
+* COMP_POINT:                            Bash Variables.      (line 219)
+* COMP_TYPE:                             Bash Variables.      (line 227)
+* COMP_WORDBREAKS:                       Bash Variables.      (line 241)
+* COMP_WORDS:                            Bash Variables.      (line 247)
+* convert-meta:                          Readline Init File Syntax.
+                                                              (line 108)
+* COPROC:                                Bash Variables.      (line 260)
+* DIRSTACK:                              Bash Variables.      (line 264)
+* disable-completion:                    Readline Init File Syntax.
+                                                              (line 116)
+* echo-control-characters:               Readline Init File Syntax.
+                                                              (line 121)
+* editing-mode:                          Readline Init File Syntax.
+                                                              (line 126)
+* EMACS:                                 Bash Variables.      (line 274)
+* emacs-mode-string:                     Readline Init File Syntax.
+                                                              (line 132)
+* enable-bracketed-paste:                Readline Init File Syntax.
+                                                              (line 142)
+* enable-keypad:                         Readline Init File Syntax.
+                                                              (line 150)
+* ENV:                                   Bash Variables.      (line 279)
+* EPOCHREALTIME:                         Bash Variables.      (line 284)
+* EPOCHSECONDS:                          Bash Variables.      (line 292)
+* EUID:                                  Bash Variables.      (line 299)
+* EXECIGNORE:                            Bash Variables.      (line 303)
+* expand-tilde:                          Readline Init File Syntax.
+                                                              (line 161)
+* FCEDIT:                                Bash Variables.      (line 316)
+* FIGNORE:                               Bash Variables.      (line 320)
+* FUNCNAME:                              Bash Variables.      (line 326)
+* FUNCNEST:                              Bash Variables.      (line 343)
+* GLOBIGNORE:                            Bash Variables.      (line 348)
+* GROUPS:                                Bash Variables.      (line 355)
+* histchars:                             Bash Variables.      (line 361)
+* HISTCMD:                               Bash Variables.      (line 376)
+* HISTCONTROL:                           Bash Variables.      (line 382)
+* HISTFILE:                              Bash Variables.      (line 398)
+* HISTFILESIZE:                          Bash Variables.      (line 402)
+* HISTIGNORE:                            Bash Variables.      (line 413)
+* history-preserve-point:                Readline Init File Syntax.
+                                                              (line 165)
+* history-size:                          Readline Init File Syntax.
+                                                              (line 171)
+* HISTSIZE:                              Bash Variables.      (line 433)
+* HISTTIMEFORMAT:                        Bash Variables.      (line 440)
+* HOME:                                  Bourne Shell Variables.
+                                                              (line  13)
+* horizontal-scroll-mode:                Readline Init File Syntax.
+                                                              (line 180)
+* HOSTFILE:                              Bash Variables.      (line 448)
+* HOSTNAME:                              Bash Variables.      (line 459)
+* HOSTTYPE:                              Bash Variables.      (line 462)
+* IFS:                                   Bourne Shell Variables.
+                                                              (line  18)
+* IGNOREEOF:                             Bash Variables.      (line 465)
+* input-meta:                            Readline Init File Syntax.
+                                                              (line 189)
+* INPUTRC:                               Bash Variables.      (line 475)
+* INSIDE_EMACS:                          Bash Variables.      (line 479)
+* isearch-terminators:                   Readline Init File Syntax.
+                                                              (line 197)
+* keymap:                                Readline Init File Syntax.
+                                                              (line 204)
+* LANG:                                  Bash Variables.      (line 485)
+* LC_ALL:                                Bash Variables.      (line 489)
+* LC_COLLATE:                            Bash Variables.      (line 493)
+* LC_CTYPE:                              Bash Variables.      (line 500)
+* LC_MESSAGES:                           Locale Translation.  (line  15)
+* LC_MESSAGES <1>:                       Bash Variables.      (line 505)
+* LC_NUMERIC:                            Bash Variables.      (line 509)
+* LC_TIME:                               Bash Variables.      (line 513)
+* LINENO:                                Bash Variables.      (line 517)
+* LINES:                                 Bash Variables.      (line 522)
+* MACHTYPE:                              Bash Variables.      (line 528)
+* MAIL:                                  Bourne Shell Variables.
+                                                              (line  22)
+* MAILCHECK:                             Bash Variables.      (line 532)
+* MAILPATH:                              Bourne Shell Variables.
+                                                              (line  27)
+* MAPFILE:                               Bash Variables.      (line 540)
+* mark-modified-lines:                   Readline Init File Syntax.
+                                                              (line 234)
+* mark-symlinked-directories:            Readline Init File Syntax.
+                                                              (line 239)
+* match-hidden-files:                    Readline Init File Syntax.
+                                                              (line 244)
+* menu-complete-display-prefix:          Readline Init File Syntax.
+                                                              (line 251)
+* meta-flag:                             Readline Init File Syntax.
+                                                              (line 189)
+* OLDPWD:                                Bash Variables.      (line 544)
+* OPTARG:                                Bourne Shell Variables.
+                                                              (line  34)
+* OPTERR:                                Bash Variables.      (line 547)
+* OPTIND:                                Bourne Shell Variables.
+                                                              (line  38)
+* OSTYPE:                                Bash Variables.      (line 551)
+* output-meta:                           Readline Init File Syntax.
+                                                              (line 256)
+* page-completions:                      Readline Init File Syntax.
+                                                              (line 262)
+* PATH:                                  Bourne Shell Variables.
+                                                              (line  42)
+* PIPESTATUS:                            Bash Variables.      (line 554)
+* POSIXLY_CORRECT:                       Bash Variables.      (line 559)
+* PPID:                                  Bash Variables.      (line 569)
+* PROMPT_COMMAND:                        Bash Variables.      (line 573)
+* PROMPT_DIRTRIM:                        Bash Variables.      (line 579)
+* PS0:                                   Bash Variables.      (line 585)
+* PS1:                                   Bourne Shell Variables.
+                                                              (line  48)
+* PS2:                                   Bourne Shell Variables.
+                                                              (line  53)
+* PS3:                                   Bash Variables.      (line 590)
+* PS4:                                   Bash Variables.      (line 595)
+* PWD:                                   Bash Variables.      (line 603)
+* RANDOM:                                Bash Variables.      (line 606)
+* READLINE_LINE:                         Bash Variables.      (line 612)
+* READLINE_MARK:                         Bash Variables.      (line 616)
+* READLINE_POINT:                        Bash Variables.      (line 622)
+* REPLY:                                 Bash Variables.      (line 626)
+* revert-all-at-newline:                 Readline Init File Syntax.
+                                                              (line 272)
+* SECONDS:                               Bash Variables.      (line 629)
+* SHELL:                                 Bash Variables.      (line 638)
+* SHELLOPTS:                             Bash Variables.      (line 643)
+* SHLVL:                                 Bash Variables.      (line 652)
+* show-all-if-ambiguous:                 Readline Init File Syntax.
+                                                              (line 278)
+* show-all-if-unmodified:                Readline Init File Syntax.
+                                                              (line 284)
+* show-mode-in-prompt:                   Readline Init File Syntax.
+                                                              (line 293)
+* skip-completed-text:                   Readline Init File Syntax.
+                                                              (line 299)
+* SRANDOM:                               Bash Variables.      (line 657)
+* TEXTDOMAIN:                            Locale Translation.  (line  15)
+* TEXTDOMAINDIR:                         Locale Translation.  (line  15)
+* TIMEFORMAT:                            Bash Variables.      (line 666)
+* TMOUT:                                 Bash Variables.      (line 704)
+* TMPDIR:                                Bash Variables.      (line 716)
+* UID:                                   Bash Variables.      (line 720)
+* vi-cmd-mode-string:                    Readline Init File Syntax.
+                                                              (line 312)
+* vi-ins-mode-string:                    Readline Init File Syntax.
+                                                              (line 323)
+* visible-stats:                         Readline Init File Syntax.
+                                                              (line 334)
+
+
+File: bash.info,  Node: Function Index,  Next: Concept Index,  Prev: Variable Index,  Up: Indexes
+
+D.4 Function Index
+==================
+
+
+* Menu:
+
+* abort (C-g):                           Miscellaneous Commands.
+                                                              (line  10)
+* accept-line (Newline or Return):       Commands For History.
+                                                              (line   6)
+* alias-expand-line ():                  Miscellaneous Commands.
+                                                              (line 125)
+* backward-char (C-b):                   Commands For Moving. (line  15)
+* backward-delete-char (Rubout):         Commands For Text.   (line  17)
+* backward-kill-line (C-x Rubout):       Commands For Killing.
+                                                              (line  11)
+* backward-kill-word (M-<DEL>):          Commands For Killing.
+                                                              (line  28)
+* backward-word (M-b):                   Commands For Moving. (line  22)
+* beginning-of-history (M-<):            Commands For History.
+                                                              (line  20)
+* beginning-of-line (C-a):               Commands For Moving. (line   6)
+* bracketed-paste-begin ():              Commands For Text.   (line  33)
+* call-last-kbd-macro (C-x e):           Keyboard Macros.     (line  13)
+* capitalize-word (M-c):                 Commands For Text.   (line  66)
+* character-search (C-]):                Miscellaneous Commands.
+                                                              (line  42)
+* character-search-backward (M-C-]):     Miscellaneous Commands.
+                                                              (line  47)
+* clear-display (M-C-l):                 Commands For Moving. (line  48)
+* clear-screen (C-l):                    Commands For Moving. (line  53)
+* complete (<TAB>):                      Commands For Completion.
+                                                              (line   6)
+* complete-command (M-!):                Commands For Completion.
+                                                              (line  80)
+* complete-filename (M-/):               Commands For Completion.
+                                                              (line  49)
+* complete-hostname (M-@):               Commands For Completion.
+                                                              (line  72)
+* complete-into-braces (M-{):            Commands For Completion.
+                                                              (line 100)
+* complete-username (M-~):               Commands For Completion.
+                                                              (line  56)
+* complete-variable (M-$):               Commands For Completion.
+                                                              (line  64)
+* copy-backward-word ():                 Commands For Killing.
+                                                              (line  69)
+* copy-forward-word ():                  Commands For Killing.
+                                                              (line  74)
+* copy-region-as-kill ():                Commands For Killing.
+                                                              (line  65)
+* dabbrev-expand ():                     Commands For Completion.
+                                                              (line  95)
+* delete-char (C-d):                     Commands For Text.   (line  12)
+* delete-char-or-list ():                Commands For Completion.
+                                                              (line  43)
+* delete-horizontal-space ():            Commands For Killing.
+                                                              (line  57)
+* digit-argument (M-0, M-1, ... M--):    Numeric Arguments.   (line   6)
+* display-shell-version (C-x C-v):       Miscellaneous Commands.
+                                                              (line 110)
+* do-lowercase-version (M-A, M-B, M-X, ...): Miscellaneous Commands.
+                                                              (line  14)
+* downcase-word (M-l):                   Commands For Text.   (line  62)
+* dump-functions ():                     Miscellaneous Commands.
+                                                              (line  74)
+* dump-macros ():                        Miscellaneous Commands.
+                                                              (line  86)
+* dump-variables ():                     Miscellaneous Commands.
+                                                              (line  80)
+* dynamic-complete-history (M-<TAB>):    Commands For Completion.
+                                                              (line  90)
+* edit-and-execute-command (C-x C-e):    Miscellaneous Commands.
+                                                              (line 134)
+* end-kbd-macro (C-x )):                 Keyboard Macros.     (line   9)
+* end-of-file (usually C-d):             Commands For Text.   (line   6)
+* end-of-history (M->):                  Commands For History.
+                                                              (line  23)
+* end-of-line (C-e):                     Commands For Moving. (line   9)
+* exchange-point-and-mark (C-x C-x):     Miscellaneous Commands.
+                                                              (line  37)
+* forward-backward-delete-char ():       Commands For Text.   (line  21)
+* forward-char (C-f):                    Commands For Moving. (line  12)
+* forward-search-history (C-s):          Commands For History.
+                                                              (line  33)
+* forward-word (M-f):                    Commands For Moving. (line  18)
+* glob-complete-word (M-g):              Miscellaneous Commands.
+                                                              (line  92)
+* glob-expand-word (C-x *):              Miscellaneous Commands.
+                                                              (line  98)
+* glob-list-expansions (C-x g):          Miscellaneous Commands.
+                                                              (line 104)
+* history-and-alias-expand-line ():      Miscellaneous Commands.
+                                                              (line 128)
+* history-expand-line (M-^):             Miscellaneous Commands.
+                                                              (line 118)
+* history-search-backward ():            Commands For History.
+                                                              (line  57)
+* history-search-forward ():             Commands For History.
+                                                              (line  51)
+* history-substring-search-backward ():  Commands For History.
+                                                              (line  69)
+* history-substring-search-forward ():   Commands For History.
+                                                              (line  63)
+* insert-comment (M-#):                  Miscellaneous Commands.
+                                                              (line  61)
+* insert-completions (M-*):              Commands For Completion.
+                                                              (line  22)
+* insert-last-argument (M-. or M-_):     Miscellaneous Commands.
+                                                              (line 131)
+* kill-line (C-k):                       Commands For Killing.
+                                                              (line   6)
+* kill-region ():                        Commands For Killing.
+                                                              (line  61)
+* kill-whole-line ():                    Commands For Killing.
+                                                              (line  19)
+* kill-word (M-d):                       Commands For Killing.
+                                                              (line  23)
+* magic-space ():                        Miscellaneous Commands.
+                                                              (line 121)
+* menu-complete ():                      Commands For Completion.
+                                                              (line  26)
+* menu-complete-backward ():             Commands For Completion.
+                                                              (line  38)
+* next-history (C-n):                    Commands For History.
+                                                              (line  17)
+* next-screen-line ():                   Commands For Moving. (line  41)
+* non-incremental-forward-search-history (M-n): Commands For History.
+                                                              (line  45)
+* non-incremental-reverse-search-history (M-p): Commands For History.
+                                                              (line  39)
+* operate-and-get-next (C-o):            Commands For History.
+                                                              (line  96)
+* overwrite-mode ():                     Commands For Text.   (line  70)
+* possible-command-completions (C-x !):  Commands For Completion.
+                                                              (line  86)
+* possible-completions (M-?):            Commands For Completion.
+                                                              (line  15)
+* possible-filename-completions (C-x /): Commands For Completion.
+                                                              (line  52)
+* possible-hostname-completions (C-x @): Commands For Completion.
+                                                              (line  76)
+* possible-username-completions (C-x ~): Commands For Completion.
+                                                              (line  60)
+* possible-variable-completions (C-x $): Commands For Completion.
+                                                              (line  68)
+* prefix-meta (<ESC>):                   Miscellaneous Commands.
+                                                              (line  19)
+* previous-history (C-p):                Commands For History.
+                                                              (line  13)
+* previous-screen-line ():               Commands For Moving. (line  34)
+* print-last-kbd-macro ():               Keyboard Macros.     (line  17)
+* quoted-insert (C-q or C-v):            Commands For Text.   (line  26)
+* re-read-init-file (C-x C-r):           Miscellaneous Commands.
+                                                              (line   6)
+* redraw-current-line ():                Commands For Moving. (line  57)
+* reverse-search-history (C-r):          Commands For History.
+                                                              (line  27)
+* revert-line (M-r):                     Miscellaneous Commands.
+                                                              (line  26)
+* self-insert (a, b, A, 1, !, ...):      Commands For Text.   (line  30)
+* set-mark (C-@):                        Miscellaneous Commands.
+                                                              (line  33)
+* shell-backward-kill-word ():           Commands For Killing.
+                                                              (line  37)
+* shell-backward-word (M-C-b):           Commands For Moving. (line  30)
+* shell-expand-line (M-C-e):             Miscellaneous Commands.
+                                                              (line 113)
+* shell-forward-word (M-C-f):            Commands For Moving. (line  26)
+* shell-kill-word (M-C-d):               Commands For Killing.
+                                                              (line  32)
+* shell-transpose-words (M-C-t):         Commands For Killing.
+                                                              (line  41)
+* skip-csi-sequence ():                  Miscellaneous Commands.
+                                                              (line  52)
+* start-kbd-macro (C-x ():               Keyboard Macros.     (line   6)
+* tilde-expand (M-&):                    Miscellaneous Commands.
+                                                              (line  30)
+* transpose-chars (C-t):                 Commands For Text.   (line  47)
+* transpose-words (M-t):                 Commands For Text.   (line  53)
+* undo (C-_ or C-x C-u):                 Miscellaneous Commands.
+                                                              (line  23)
+* universal-argument ():                 Numeric Arguments.   (line  10)
+* unix-filename-rubout ():               Commands For Killing.
+                                                              (line  52)
+* unix-line-discard (C-u):               Commands For Killing.
+                                                              (line  16)
+* unix-word-rubout (C-w):                Commands For Killing.
+                                                              (line  48)
+* upcase-word (M-u):                     Commands For Text.   (line  58)
+* yank (C-y):                            Commands For Killing.
+                                                              (line  79)
+* yank-last-arg (M-. or M-_):            Commands For History.
+                                                              (line  84)
+* yank-nth-arg (M-C-y):                  Commands For History.
+                                                              (line  75)
+* yank-pop (M-y):                        Commands For Killing.
+                                                              (line  82)
+
+
+File: bash.info,  Node: Concept Index,  Prev: Function Index,  Up: Indexes
+
+D.5 Concept Index
+=================
+
+
+* Menu:
+
+* alias expansion:                       Aliases.             (line   6)
+* arithmetic evaluation:                 Shell Arithmetic.    (line   6)
+* arithmetic expansion:                  Arithmetic Expansion.
+                                                              (line   6)
+* arithmetic, shell:                     Shell Arithmetic.    (line   6)
+* arrays:                                Arrays.              (line   6)
+* background:                            Job Control Basics.  (line   6)
+* Bash configuration:                    Basic Installation.  (line   6)
+* Bash installation:                     Basic Installation.  (line   6)
+* Bourne shell:                          Basic Shell Features.
+                                                              (line   6)
+* brace expansion:                       Brace Expansion.     (line   6)
+* builtin:                               Definitions.         (line  17)
+* command editing:                       Readline Bare Essentials.
+                                                              (line   6)
+* command execution:                     Command Search and Execution.
+                                                              (line   6)
+* command expansion:                     Simple Command Expansion.
+                                                              (line   6)
+* command history:                       Bash History Facilities.
+                                                              (line   6)
+* command search:                        Command Search and Execution.
+                                                              (line   6)
+* command substitution:                  Command Substitution.
+                                                              (line   6)
+* command timing:                        Pipelines.           (line   9)
+* commands, compound:                    Compound Commands.   (line   6)
+* commands, conditional:                 Conditional Constructs.
+                                                              (line   6)
+* commands, grouping:                    Command Grouping.    (line   6)
+* commands, lists:                       Lists.               (line   6)
+* commands, looping:                     Looping Constructs.  (line   6)
+* commands, pipelines:                   Pipelines.           (line   6)
+* commands, shell:                       Shell Commands.      (line   6)
+* commands, simple:                      Simple Commands.     (line   6)
+* comments, shell:                       Comments.            (line   6)
+* Compatibility Level:                   Shell Compatibility Mode.
+                                                              (line   6)
+* Compatibility Mode:                    Shell Compatibility Mode.
+                                                              (line   6)
+* completion builtins:                   Programmable Completion Builtins.
+                                                              (line   6)
+* configuration:                         Basic Installation.  (line   6)
+* control operator:                      Definitions.         (line  21)
+* coprocess:                             Coprocesses.         (line   6)
+* directory stack:                       The Directory Stack. (line   6)
+* editing command lines:                 Readline Bare Essentials.
+                                                              (line   6)
+* environment:                           Environment.         (line   6)
+* evaluation, arithmetic:                Shell Arithmetic.    (line   6)
+* event designators:                     Event Designators.   (line   6)
+* execution environment:                 Command Execution Environment.
+                                                              (line   6)
+* exit status:                           Definitions.         (line  26)
+* exit status <1>:                       Exit Status.         (line   6)
+* expansion:                             Shell Expansions.    (line   6)
+* expansion, arithmetic:                 Arithmetic Expansion.
+                                                              (line   6)
+* expansion, brace:                      Brace Expansion.     (line   6)
+* expansion, filename:                   Filename Expansion.  (line   9)
+* expansion, parameter:                  Shell Parameter Expansion.
+                                                              (line   6)
+* expansion, pathname:                   Filename Expansion.  (line   9)
+* expansion, tilde:                      Tilde Expansion.     (line   6)
+* expressions, arithmetic:               Shell Arithmetic.    (line   6)
+* expressions, conditional:              Bash Conditional Expressions.
+                                                              (line   6)
+* field:                                 Definitions.         (line  30)
+* filename:                              Definitions.         (line  35)
+* filename expansion:                    Filename Expansion.  (line   9)
+* foreground:                            Job Control Basics.  (line   6)
+* functions, shell:                      Shell Functions.     (line   6)
+* history builtins:                      Bash History Builtins.
+                                                              (line   6)
+* history events:                        Event Designators.   (line   8)
+* history expansion:                     History Interaction. (line   6)
+* history list:                          Bash History Facilities.
+                                                              (line   6)
+* History, how to use:                   A Programmable Completion Example.
+                                                              (line 113)
+* identifier:                            Definitions.         (line  51)
+* initialization file, readline:         Readline Init File.  (line   6)
+* installation:                          Basic Installation.  (line   6)
+* interaction, readline:                 Readline Interaction.
+                                                              (line   6)
+* interactive shell:                     Invoking Bash.       (line 131)
+* interactive shell <1>:                 Interactive Shells.  (line   6)
+* internationalization:                  Locale Translation.  (line   6)
+* job:                                   Definitions.         (line  38)
+* job control:                           Definitions.         (line  42)
+* job control <1>:                       Job Control Basics.  (line   6)
+* kill ring:                             Readline Killing Commands.
+                                                              (line  18)
+* killing text:                          Readline Killing Commands.
+                                                              (line   6)
+* localization:                          Locale Translation.  (line   6)
+* login shell:                           Invoking Bash.       (line 128)
+* matching, pattern:                     Pattern Matching.    (line   6)
+* metacharacter:                         Definitions.         (line  46)
+* name:                                  Definitions.         (line  51)
+* native languages:                      Locale Translation.  (line   6)
+* notation, readline:                    Readline Bare Essentials.
+                                                              (line   6)
+* operator, shell:                       Definitions.         (line  57)
+* parameter expansion:                   Shell Parameter Expansion.
+                                                              (line   6)
+* parameters:                            Shell Parameters.    (line   6)
+* parameters, positional:                Positional Parameters.
+                                                              (line   6)
+* parameters, special:                   Special Parameters.  (line   6)
+* pathname expansion:                    Filename Expansion.  (line   9)
+* pattern matching:                      Pattern Matching.    (line   6)
+* pipeline:                              Pipelines.           (line   6)
+* POSIX:                                 Definitions.         (line   9)
+* POSIX Mode:                            Bash POSIX Mode.     (line   6)
+* process group:                         Definitions.         (line  62)
+* process group ID:                      Definitions.         (line  66)
+* process substitution:                  Process Substitution.
+                                                              (line   6)
+* programmable completion:               Programmable Completion.
+                                                              (line   6)
+* prompting:                             Controlling the Prompt.
+                                                              (line   6)
+* quoting:                               Quoting.             (line   6)
+* quoting, ANSI:                         ANSI-C Quoting.      (line   6)
+* Readline, how to use:                  Job Control Variables.
+                                                              (line  23)
+* redirection:                           Redirections.        (line   6)
+* reserved word:                         Definitions.         (line  70)
+* reserved words:                        Reserved Words.      (line   6)
+* restricted shell:                      The Restricted Shell.
+                                                              (line   6)
+* return status:                         Definitions.         (line  75)
+* shell arithmetic:                      Shell Arithmetic.    (line   6)
+* shell function:                        Shell Functions.     (line   6)
+* shell script:                          Shell Scripts.       (line   6)
+* shell variable:                        Shell Parameters.    (line   6)
+* shell, interactive:                    Interactive Shells.  (line   6)
+* signal:                                Definitions.         (line  78)
+* signal handling:                       Signals.             (line   6)
+* special builtin:                       Definitions.         (line  82)
+* special builtin <1>:                   Special Builtins.    (line   6)
+* startup files:                         Bash Startup Files.  (line   6)
+* suspending jobs:                       Job Control Basics.  (line   6)
+* tilde expansion:                       Tilde Expansion.     (line   6)
+* token:                                 Definitions.         (line  86)
+* translation, native languages:         Locale Translation.  (line   6)
+* variable, shell:                       Shell Parameters.    (line   6)
+* variables, readline:                   Readline Init File Syntax.
+                                                              (line  37)
+* word:                                  Definitions.         (line  90)
+* word splitting:                        Word Splitting.      (line   6)
+* yanking text:                          Readline Killing Commands.
+                                                              (line   6)
+
+
+
+Tag Table:
+Node: Top895
+Node: Introduction2813
+Node: What is Bash?3029
+Node: What is a shell?4143
+Node: Definitions6681
+Node: Basic Shell Features9632
+Node: Shell Syntax10851
+Node: Shell Operation11877
+Node: Quoting13170
+Node: Escape Character14470
+Node: Single Quotes14955
+Node: Double Quotes15303
+Node: ANSI-C Quoting16581
+Node: Locale Translation17840
+Node: Comments18993
+Node: Shell Commands19611
+Node: Reserved Words20549
+Node: Simple Commands21305
+Node: Pipelines21959
+Node: Lists24891
+Node: Compound Commands26682
+Node: Looping Constructs27694
+Node: Conditional Constructs30189
+Node: Command Grouping41760
+Node: Coprocesses43239
+Node: GNU Parallel45142
+Node: Shell Functions49443
+Node: Shell Parameters56650
+Node: Positional Parameters61063
+Node: Special Parameters61963
+Node: Shell Expansions65187
+Node: Brace Expansion67310
+Node: Tilde Expansion70033
+Node: Shell Parameter Expansion72650
+Node: Command Substitution87779
+Node: Arithmetic Expansion89134
+Node: Process Substitution90066
+Node: Word Splitting91186
+Node: Filename Expansion93130
+Node: Pattern Matching95679
+Node: Quote Removal99665
+Node: Redirections99960
+Node: Executing Commands109530
+Node: Simple Command Expansion110200
+Node: Command Search and Execution112154
+Node: Command Execution Environment114530
+Node: Environment117514
+Node: Exit Status119173
+Node: Signals120843
+Node: Shell Scripts122810
+Node: Shell Builtin Commands125822
+Node: Bourne Shell Builtins127860
+Node: Bash Builtins148789
+Node: Modifying Shell Behavior178898
+Node: The Set Builtin179243
+Node: The Shopt Builtin189656
+Node: Special Builtins204566
+Node: Shell Variables205545
+Node: Bourne Shell Variables205982
+Node: Bash Variables208086
+Node: Bash Features240720
+Node: Invoking Bash241733
+Node: Bash Startup Files247746
+Node: Interactive Shells252849
+Node: What is an Interactive Shell?253259
+Node: Is this Shell Interactive?253908
+Node: Interactive Shell Behavior254723
+Node: Bash Conditional Expressions258237
+Node: Shell Arithmetic262814
+Node: Aliases265754
+Node: Arrays268374
+Node: The Directory Stack274383
+Node: Directory Stack Builtins275167
+Node: Controlling the Prompt278135
+Node: The Restricted Shell281085
+Node: Bash POSIX Mode283679
+Node: Shell Compatibility Mode294715
+Node: Job Control301371
+Node: Job Control Basics301831
+Node: Job Control Builtins306827
+Node: Job Control Variables312227
+Node: Command Line Editing313383
+Node: Introduction and Notation315054
+Node: Readline Interaction316677
+Node: Readline Bare Essentials317868
+Node: Readline Movement Commands319651
+Node: Readline Killing Commands320611
+Node: Readline Arguments322529
+Node: Searching323573
+Node: Readline Init File325759
+Node: Readline Init File Syntax327018
+Node: Conditional Init Constructs347556
+Node: Sample Init File351752
+Node: Bindable Readline Commands354876
+Node: Commands For Moving356080
+Node: Commands For History358131
+Node: Commands For Text362924
+Node: Commands For Killing366573
+Node: Numeric Arguments369606
+Node: Commands For Completion370745
+Node: Keyboard Macros374936
+Node: Miscellaneous Commands375623
+Node: Readline vi Mode381307
+Node: Programmable Completion382214
+Node: Programmable Completion Builtins389994
+Node: A Programmable Completion Example400689
+Node: Using History Interactively405936
+Node: Bash History Facilities406620
+Node: Bash History Builtins409625
+Node: History Interaction414354
+Node: Event Designators417974
+Node: Word Designators419328
+Node: Modifiers421088
+Node: Installing Bash422899
+Node: Basic Installation424036
+Node: Compilers and Options427294
+Node: Compiling For Multiple Architectures428035
+Node: Installation Names429728
+Node: Specifying the System Type430546
+Node: Sharing Defaults431262
+Node: Operation Controls431935
+Node: Optional Features432893
+Node: Reporting Bugs443411
+Node: Major Differences From The Bourne Shell444605
+Node: GNU Free Documentation License461457
+Node: Indexes486634
+Node: Builtin Index487088
+Node: Reserved Word Index493915
+Node: Variable Index496363
+Node: Function Index512260
+Node: Concept Index525770
+
+End Tag Table
+
+
+Local Variables:
+coding: utf-8
+End:
diff --git a/doc/bash.pdf b/doc/bash.pdf
new file mode 100644
index 0000000..d8d784e
--- /dev/null
+++ b/doc/bash.pdf
diff --git a/doc/bash.ps b/doc/bash.ps
new file mode 100644
index 0000000..bd38ef3
--- /dev/null
+++ b/doc/bash.ps
@@ -0,0 +1,10059 @@
+%!PS-Adobe-3.0
+%%Creator: groff version 1.22.4
+%%CreationDate: Wed Nov 18 15:13:06 2020
+%%DocumentNeededResources: font Times-Roman
+%%+ font Times-Bold
+%%+ font Times-Italic
+%%+ font Courier
+%%+ font Symbol
+%%DocumentSuppliedResources: procset grops 1.22 4
+%%Pages: 83
+%%PageOrder: Ascend
+%%DocumentMedia: Default 612 792 0 () ()
+%%Orientation: Portrait
+%%EndComments
+%%BeginDefaults
+%%PageMedia: Default
+%%EndDefaults
+%%BeginProlog
+%%BeginResource: procset grops 1.22 4
+%!PS-Adobe-3.0 Resource-ProcSet
+/setpacking where{
+pop
+currentpacking
+true setpacking
+}if
+/grops 120 dict dup begin
+/SC 32 def
+/A/show load def
+/B{0 SC 3 -1 roll widthshow}bind def
+/C{0 exch ashow}bind def
+/D{0 exch 0 SC 5 2 roll awidthshow}bind def
+/E{0 rmoveto show}bind def
+/F{0 rmoveto 0 SC 3 -1 roll widthshow}bind def
+/G{0 rmoveto 0 exch ashow}bind def
+/H{0 rmoveto 0 exch 0 SC 5 2 roll awidthshow}bind def
+/I{0 exch rmoveto show}bind def
+/J{0 exch rmoveto 0 SC 3 -1 roll widthshow}bind def
+/K{0 exch rmoveto 0 exch ashow}bind def
+/L{0 exch rmoveto 0 exch 0 SC 5 2 roll awidthshow}bind def
+/M{rmoveto show}bind def
+/N{rmoveto 0 SC 3 -1 roll widthshow}bind def
+/O{rmoveto 0 exch ashow}bind def
+/P{rmoveto 0 exch 0 SC 5 2 roll awidthshow}bind def
+/Q{moveto show}bind def
+/R{moveto 0 SC 3 -1 roll widthshow}bind def
+/S{moveto 0 exch ashow}bind def
+/T{moveto 0 exch 0 SC 5 2 roll awidthshow}bind def
+/SF{
+findfont exch
+[exch dup 0 exch 0 exch neg 0 0]makefont
+dup setfont
+[exch/setfont cvx]cvx bind def
+}bind def
+/MF{
+findfont
+[5 2 roll
+0 3 1 roll
+neg 0 0]makefont
+dup setfont
+[exch/setfont cvx]cvx bind def
+}bind def
+/level0 0 def
+/RES 0 def
+/PL 0 def
+/LS 0 def
+/MANUAL{
+statusdict begin/manualfeed true store end
+}bind def
+/PLG{
+gsave newpath clippath pathbbox grestore
+exch pop add exch pop
+}bind def
+/BP{
+/level0 save def
+1 setlinecap
+1 setlinejoin
+DEFS/BPhook known{DEFS begin BPhook end}if
+72 RES div dup scale
+LS{
+90 rotate
+}{
+0 PL translate
+}ifelse
+1 -1 scale
+}bind def
+/EP{
+level0 restore
+showpage
+}def
+/DA{
+newpath arcn stroke
+}bind def
+/SN{
+transform
+.25 sub exch .25 sub exch
+round .25 add exch round .25 add exch
+itransform
+}bind def
+/DL{
+SN
+moveto
+SN
+lineto stroke
+}bind def
+/DC{
+newpath 0 360 arc closepath
+}bind def
+/TM matrix def
+/DE{
+TM currentmatrix pop
+translate scale newpath 0 0 .5 0 360 arc closepath
+TM setmatrix
+}bind def
+/RC/rcurveto load def
+/RL/rlineto load def
+/ST/stroke load def
+/MT/moveto load def
+/CL/closepath load def
+/Fr{
+setrgbcolor fill
+}bind def
+/setcmykcolor where{
+pop
+/Fk{
+setcmykcolor fill
+}bind def
+}if
+/Fg{
+setgray fill
+}bind def
+/FL/fill load def
+/LW/setlinewidth load def
+/Cr/setrgbcolor load def
+/setcmykcolor where{
+pop
+/Ck/setcmykcolor load def
+}if
+/Cg/setgray load def
+/RE{
+findfont
+dup maxlength 1 index/FontName known not{1 add}if dict begin
+{
+1 index/FID ne
+2 index/UniqueID ne
+and
+{def}{pop pop}ifelse
+}forall
+/Encoding exch def
+dup/FontName exch def
+currentdict end definefont pop
+}bind def
+/DEFS 0 def
+/EBEGIN{
+moveto
+DEFS begin
+}bind def
+/EEND/end load def
+/CNT 0 def
+/level1 0 def
+/PBEGIN{
+/level1 save def
+translate
+div 3 1 roll div exch scale
+neg exch neg exch translate
+0 setgray
+0 setlinecap
+1 setlinewidth
+0 setlinejoin
+10 setmiterlimit
+[]0 setdash
+/setstrokeadjust where{
+pop
+false setstrokeadjust
+}if
+/setoverprint where{
+pop
+false setoverprint
+}if
+newpath
+/CNT countdictstack def
+userdict begin
+/showpage{}def
+/setpagedevice{}def
+mark
+}bind def
+/PEND{
+cleartomark
+countdictstack CNT sub{end}repeat
+level1 restore
+}bind def
+end def
+/setpacking where{
+pop
+setpacking
+}if
+%%EndResource
+%%EndProlog
+%%BeginSetup
+%%BeginFeature: *PageSize Default
+<< /PageSize [ 612 792 ] /ImagingBBox null >> setpagedevice
+%%EndFeature
+%%IncludeResource: font Times-Roman
+%%IncludeResource: font Times-Bold
+%%IncludeResource: font Times-Italic
+%%IncludeResource: font Courier
+%%IncludeResource: font Symbol
+grops begin/DEFS 1 dict def DEFS begin/u{.001 mul}bind def end/RES 72
+def/PL 792 def/LS false def/ENC0[/asciicircum/asciitilde/Scaron/Zcaron
+/scaron/zcaron/Ydieresis/trademark/quotesingle/Euro/.notdef/.notdef
+/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef
+/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef
+/.notdef/.notdef/space/exclam/quotedbl/numbersign/dollar/percent
+/ampersand/quoteright/parenleft/parenright/asterisk/plus/comma/hyphen
+/period/slash/zero/one/two/three/four/five/six/seven/eight/nine/colon
+/semicolon/less/equal/greater/question/at/A/B/C/D/E/F/G/H/I/J/K/L/M/N/O
+/P/Q/R/S/T/U/V/W/X/Y/Z/bracketleft/backslash/bracketright/circumflex
+/underscore/quoteleft/a/b/c/d/e/f/g/h/i/j/k/l/m/n/o/p/q/r/s/t/u/v/w/x/y
+/z/braceleft/bar/braceright/tilde/.notdef/quotesinglbase/guillemotleft
+/guillemotright/bullet/florin/fraction/perthousand/dagger/daggerdbl
+/endash/emdash/ff/fi/fl/ffi/ffl/dotlessi/dotlessj/grave/hungarumlaut
+/dotaccent/breve/caron/ring/ogonek/quotedblleft/quotedblright/oe/lslash
+/quotedblbase/OE/Lslash/.notdef/exclamdown/cent/sterling/currency/yen
+/brokenbar/section/dieresis/copyright/ordfeminine/guilsinglleft
+/logicalnot/minus/registered/macron/degree/plusminus/twosuperior
+/threesuperior/acute/mu/paragraph/periodcentered/cedilla/onesuperior
+/ordmasculine/guilsinglright/onequarter/onehalf/threequarters
+/questiondown/Agrave/Aacute/Acircumflex/Atilde/Adieresis/Aring/AE
+/Ccedilla/Egrave/Eacute/Ecircumflex/Edieresis/Igrave/Iacute/Icircumflex
+/Idieresis/Eth/Ntilde/Ograve/Oacute/Ocircumflex/Otilde/Odieresis
+/multiply/Oslash/Ugrave/Uacute/Ucircumflex/Udieresis/Yacute/Thorn
+/germandbls/agrave/aacute/acircumflex/atilde/adieresis/aring/ae/ccedilla
+/egrave/eacute/ecircumflex/edieresis/igrave/iacute/icircumflex/idieresis
+/eth/ntilde/ograve/oacute/ocircumflex/otilde/odieresis/divide/oslash
+/ugrave/uacute/ucircumflex/udieresis/yacute/thorn/ydieresis]def
+/Courier@0 ENC0/Courier RE/Times-Italic@0 ENC0/Times-Italic RE
+/Times-Bold@0 ENC0/Times-Bold RE/Times-Roman@0 ENC0/Times-Roman RE
+%%EndSetup
+%%Page: 1 1
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10.95
+/Times-Bold@0 SF -.219(NA)72 84 S(ME).219 E F0(bash \255 GNU Bourne-Ag)
+108 96 Q(ain SHell)-.05 E F1(SYNOPSIS)72 112.8 Q/F2 10/Times-Bold@0 SF
+(bash)108 124.8 Q F0([options] [command_string | \214le])2.5 E F1
+(COPYRIGHT)72 141.6 Q F0(Bash is Cop)108 153.6 Q
+(yright \251 1989-2020 by the Free Softw)-.1 E(are F)-.1 E
+(oundation, Inc.)-.15 E F1(DESCRIPTION)72 170.4 Q F2(Bash)108 182.4 Q F0
+.973(is an)3.474 F F2(sh)3.473 E F0 .973
+(-compatible command language interpreter that e)B -.15(xe)-.15 G .973
+(cutes commands read from the standard).15 F(input or from a \214le.)108
+194.4 Q F2(Bash)5 E F0(also incorporates useful features from the)2.5 E
+/F3 10/Times-Italic@0 SF -.4(Ko)2.5 G(rn).4 E F0(and)2.5 E F3(C)2.5 E F0
+(shells \()2.5 E F2(ksh)A F0(and)2.5 E F2(csh)2.5 E F0(\).)A F2(Bash)108
+211.2 Q F0 .527(is intended to be a conformant implementation of the Sh\
+ell and Utilities portion of the IEEE POSIX)3.027 F
+(speci\214cation \(IEEE Standard 1003.1\).)108 223.2 Q F2(Bash)5 E F0
+(can be con\214gured to be POSIX-conformant by def)2.5 E(ault.)-.1 E F1
+(OPTIONS)72 240 Q F0 .483(All of the single-character shell options doc\
+umented in the description of the)108 252 R F2(set)2.983 E F0 -.2(bu)
+2.983 G .483(iltin command, includ-).2 F(ing)108 264 Q F2<ad6f>2.718 E
+F0 2.718(,c)C .218(an be used as options when the shell is in)-2.718 F
+-.2(vo)-.4 G -.1(ke).2 G 2.718(d. In).1 F(addition,)2.719 E F2(bash)
+2.719 E F0 .219(interprets the follo)2.719 F .219(wing options)-.25 F
+(when it is in)108 276 Q -.2(vo)-.4 G -.1(ke).2 G(d:).1 E F2<ad63>108
+292.8 Q F0 .868(If the)158 292.8 R F2<ad63>3.368 E F0 .867(option is pr\
+esent, then commands are read from the \214rst non-option ar)3.368 F
+(gument)-.18 E F3(com-)3.567 E(mand_string)158 304.8 Q F0 5.726(.I).22 G
+3.226(ft)-5.726 G .726(here are ar)-3.226 F .727(guments after the)-.18
+F F3(command_string)3.427 E F0 3.227(,t).22 G .727(he \214rst ar)-3.227
+F .727(gument is assigned)-.18 F(to)158 316.8 Q F2($0)2.919 E F0 .419
+(and an)2.919 F 2.919(yr)-.15 G .419(emaining ar)-2.919 F .418
+(guments are assigned to the positional parameters.)-.18 F .418
+(The assignment)5.418 F(to)158 328.8 Q F2($0)2.5 E F0
+(sets the name of the shell, which is used in w)2.5 E
+(arning and error messages.)-.1 E F2<ad69>108 340.8 Q F0(If the)158
+340.8 Q F2<ad69>2.5 E F0(option is present, the shell is)2.5 E F3(inter)
+2.51 E(active)-.15 E F0(.).18 E F2<ad6c>108 352.8 Q F0(Mak)158 352.8 Q
+(e)-.1 E F2(bash)2.5 E F0(act as if it had been in)2.5 E -.2(vo)-.4 G
+-.1(ke).2 G 2.5(da).1 G 2.5(sal)-2.5 G(ogin shell \(see)-2.5 E/F4 9
+/Times-Bold@0 SF(INV)2.5 E(OCA)-.405 E(TION)-.855 E F0(belo)2.25 E(w\).)
+-.25 E F2<ad72>108 364.8 Q F0(If the)158 364.8 Q F2<ad72>2.5 E F0
+(option is present, the shell becomes)2.5 E F3 -.37(re)2.5 G(stricted)
+.37 E F0(\(see)3.27 E F4(RESTRICTED SHELL)2.5 E F0(belo)2.25 E(w\).)-.25
+E F2<ad73>108 376.8 Q F0 .602(If the)158 376.8 R F2<ad73>3.102 E F0 .602
+(option is present, or if no ar)3.102 F .602
+(guments remain after option processing, then commands)-.18 F .617
+(are read from the standard input.)158 388.8 R .617(This option allo)
+5.617 F .616(ws the positional parameters to be set when)-.25 F(in)158
+400.8 Q -.2(vo)-.4 G(king an interacti).2 E .3 -.15(ve s)-.25 H
+(hell or when reading input through a pipe.).15 E F2<ad44>108 412.8 Q F0
+3.183(Al)158 412.8 S .683(ist of all double-quoted strings preceded by)
+-3.183 F F2($)3.184 E F0 .684(is printed on the standard output.)3.184 F
+.684(These are)5.684 F .458(the strings that are subject to language tr\
+anslation when the current locale is not)158 424.8 R F2(C)2.958 E F0(or)
+2.958 E F2(POSIX)2.958 E F0(.)A(This implies the)158 436.8 Q F2<ad6e>2.5
+E F0(option; no commands will be e)2.5 E -.15(xe)-.15 G(cuted.).15 E F2
+([\255+]O [)108 448.8 Q F3(shopt_option)A F2(])A F3(shopt_option)158
+460.8 Q F0 1.097(is one of the shell options accepted by the)3.596 F F2
+(shopt)3.597 E F0 -.2(bu)3.597 G 1.097(iltin \(see).2 F F4 1.097
+(SHELL B)3.597 F(UIL)-.09 E(TIN)-.828 E(COMMANDS)158 472.8 Q F0(belo)
+3.003 E 3.253(w\). If)-.25 F F3(shopt_option)3.253 E F0 .753
+(is present,)3.253 F F2<ad4f>3.253 E F0 .753(sets the v)3.253 F .753
+(alue of that option;)-.25 F F2(+O)3.252 E F0(unsets)3.252 E 2.624
+(it. If)158 484.8 R F3(shopt_option)2.624 E F0 .124
+(is not supplied, the names and v)2.624 F .125
+(alues of the shell options accepted by)-.25 F F2(shopt)2.625 E F0 .506
+(are printed on the standard output.)158 496.8 R .505(If the in)5.505 F
+-.2(vo)-.4 G .505(cation option is).2 F F2(+O)3.005 E F0 3.005(,t)C .505
+(he output is displayed in a)-3.005 F
+(format that may be reused as input.)158 508.8 Q F2<adad>108 520.8 Q F0
+(A)158 520.8 Q F2<adad>3.363 E F0 .864
+(signals the end of options and disables further option processing.)
+3.363 F(An)5.864 E 3.364(ya)-.15 G -.18(rg)-3.364 G .864(uments after)
+.18 F(the)158 532.8 Q F2<adad>2.5 E F0
+(are treated as \214lenames and ar)2.5 E 2.5(guments. An)-.18 F(ar)2.5 E
+(gument of)-.18 E F2<ad>2.5 E F0(is equi)2.5 E -.25(va)-.25 G(lent to)
+.25 E F2<adad>2.5 E F0(.)A F2(Bash)108 549.6 Q F0 .304
+(also interprets a number of multi-character options.)2.804 F .303
+(These options must appear on the command line)5.303 F
+(before the single-character options to be recognized.)108 561.6 Q F2
+<adad646562>108 578.4 Q(ugger)-.2 E F0 .474(Arrange for the deb)144
+590.4 R .474(ugger pro\214le to be e)-.2 F -.15(xe)-.15 G .475
+(cuted before the shell starts.).15 F -.45(Tu)5.475 G .475(rns on e).45
+F .475(xtended deb)-.15 F(ug-)-.2 E
+(ging mode \(see the description of the)144 602.4 Q F2(extdeb)2.5 E(ug)
+-.2 E F0(option to the)2.5 E F2(shopt)2.5 E F0 -.2(bu)2.5 G(iltin belo)
+.2 E(w\).)-.25 E F2(\255\255dump\255po\255strings)108 614.4 Q F0(Equi)
+144 626.4 Q -.25(va)-.25 G(lent to).25 E F2<ad44>2.5 E F0 2.5(,b)C
+(ut the output is in the GNU)-2.7 E F3 -.1(ge)2.5 G(tte).1 E(xt)-.2 E F2
+(po)2.5 E F0(\(portable object\) \214le format.)2.5 E F2
+(\255\255dump\255strings)108 638.4 Q F0(Equi)144 650.4 Q -.25(va)-.25 G
+(lent to).25 E F2<ad44>2.5 E F0(.)A F2(\255\255help)108 662.4 Q F0
+(Display a usage message on standard output and e)144 662.4 Q
+(xit successfully)-.15 E(.)-.65 E F2<adad696e6974ad8c6c65>108 674.4 Q F3
+(\214le)2.5 E F2<adad72>108 686.4 Q(c\214le)-.18 E F3(\214le)2.5 E F0
+(Ex)144 698.4 Q 1.599(ecute commands from)-.15 F F3(\214le)6.009 E F0
+1.598(instead of the standard personal initialization \214le)4.279 F F3
+(~/.bashr)3.598 E(c)-.37 E F0 1.598(if the)4.408 F(shell is interacti)
+144 710.4 Q .3 -.15(ve \()-.25 H(see).15 E F4(INV)2.5 E(OCA)-.405 E
+(TION)-.855 E F0(belo)2.25 E(w\).)-.25 E(GNU Bash 5.1)72 768 Q
+(2020 October 29)141.235 E(1)195.395 E 0 Cg EP
+%%Page: 2 2
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(\255\255login)108 84 Q F0(Equi)144 96 Q -.25(va)-.25 G(lent to).25 E
+F1<ad6c>2.5 E F0(.)A F1(\255\255noediting)108 112.8 Q F0
+(Do not use the GNU)144 124.8 Q F1 -.18(re)2.5 G(adline).18 E F0
+(library to read command lines when the shell is interacti)2.5 E -.15
+(ve)-.25 G(.).15 E F1(\255\255nopr)108 141.6 Q(o\214le)-.18 E F0 .017
+(Do not read either the system-wide startup \214le)144 153.6 R/F2 10
+/Times-Italic@0 SF(/etc/pr)4.183 E(o\214le)-.45 E F0 .017(or an)4.183 F
+2.517(yo)-.15 G 2.517(ft)-2.517 G .018
+(he personal initialization \214les)-2.517 F F2(~/.bash_pr)143.5 165.6 Q
+(o\214le)-.45 E F0(,).18 E F2(~/.bash_lo)2.305 E(gin)-.1 E F0 2.805(,o)
+.24 G(r)-2.805 E F2(~/.pr)2.305 E(o\214le)-.45 E F0 5.305(.B).18 G 2.805
+(yd)-5.305 G(ef)-2.805 E(ault,)-.1 E F1(bash)2.805 E F0 .305
+(reads these \214les when it is in)2.805 F -.2(vo)-.4 G -.1(ke).2 G
+2.805(da).1 G(s)-2.805 E 2.5(al)144 177.6 S(ogin shell \(see)-2.5 E/F3 9
+/Times-Bold@0 SF(INV)2.5 E(OCA)-.405 E(TION)-.855 E F0(belo)2.25 E(w\).)
+-.25 E F1<adad6e6f72>108 194.4 Q(c)-.18 E F0 .161(Do not read and e)144
+194.4 R -.15(xe)-.15 G .162(cute the personal initialization \214le).15
+F F2(~/.bashr)2.162 E(c)-.37 E F0 .162(if the shell is interacti)2.972 F
+-.15(ve)-.25 G 5.162(.T).15 G .162(his op-)-5.162 F(tion is on by def)
+144 206.4 Q(ault if the shell is in)-.1 E -.2(vo)-.4 G -.1(ke).2 G 2.5
+(da).1 G(s)-2.5 E F1(sh)2.5 E F0(.)A F1(\255\255posix)108 223.2 Q F0
+1.783(Change the beha)144 235.2 R 1.782(vior of)-.2 F F1(bash)4.282 E F0
+1.782(where the def)4.282 F 1.782(ault operation dif)-.1 F 1.782
+(fers from the POSIX standard to)-.25 F .332(match the standard \()144
+247.2 R F2 .332(posix mode)B F0 2.832(\). See)B F3 .333(SEE ALSO)2.833 F
+F0(belo)2.583 E 2.833(wf)-.25 G .333
+(or a reference to a document that details)-2.833 F(ho)144 259.2 Q 2.5
+(wp)-.25 G(osix mode af)-2.5 E(fects bash')-.25 E 2.5(sb)-.55 G(eha)-2.5
+E(vior)-.2 E(.)-.55 E F1<adad72>108 276 Q(estricted)-.18 E F0
+(The shell becomes restricted \(see)144 288 Q F3(RESTRICTED SHELL)2.5 E
+F0(belo)2.25 E(w\).)-.25 E F1<adad76>108 304.8 Q(erbose)-.1 E F0(Equi)
+144 316.8 Q -.25(va)-.25 G(lent to).25 E F1<ad76>2.5 E F0(.)A F1<adad76>
+108 333.6 Q(ersion)-.1 E F0(Sho)144 345.6 Q 2.5(wv)-.25 G
+(ersion information for this instance of)-2.65 E F1(bash)2.5 E F0
+(on the standard output and e)2.5 E(xit successfully)-.15 E(.)-.65 E/F4
+10.95/Times-Bold@0 SF(ARGUMENTS)72 362.4 Q F0 .017(If ar)108 374.4 R
+.016(guments remain after option processing, and neither the)-.18 F F1
+<ad63>2.516 E F0 .016(nor the)2.516 F F1<ad73>2.516 E F0 .016
+(option has been supplied, the \214rst)2.516 F(ar)108 386.4 Q .041(gume\
+nt is assumed to be the name of a \214le containing shell commands.)-.18
+F(If)5.041 E F1(bash)2.541 E F0 .041(is in)2.541 F -.2(vo)-.4 G -.1(ke)
+.2 G 2.541(di).1 G 2.541(nt)-2.541 G .042(his f)-2.541 F(ashion,)-.1 E
+F1($0)108 398.4 Q F0 .936(is set to the name of the \214le, and the pos\
+itional parameters are set to the remaining ar)3.436 F(guments.)-.18 E
+F1(Bash)5.935 E F0 .233(reads and e)108 410.4 R -.15(xe)-.15 G .233
+(cutes commands from this \214le, then e).15 F(xits.)-.15 E F1(Bash)
+5.234 E F0 1.334 -.55('s e)D .234(xit status is the e).4 F .234
+(xit status of the last com-)-.15 F .349(mand e)108 422.4 R -.15(xe)-.15
+G .349(cuted in the script.).15 F .349(If no commands are e)5.349 F -.15
+(xe)-.15 G .349(cuted, the e).15 F .348(xit status is 0.)-.15 F .348
+(An attempt is \214rst made to)5.348 F .253
+(open the \214le in the current directory)108 434.4 R 2.753(,a)-.65 G
+.254
+(nd, if no \214le is found, then the shell searches the directories in)
+-2.753 F F3 -.666(PA)2.754 G(TH)-.189 E F0(for the script.)108 446.4 Q
+F4(INV)72 463.2 Q(OCA)-.493 E(TION)-1.04 E F0(A)108 475.2 Q F2(lo)2.5 E
+(gin shell)-.1 E F0(is one whose \214rst character of ar)2.5 E
+(gument zero is a)-.18 E F1<ad>2.5 E F0 2.5(,o)C 2.5(ro)-2.5 G
+(ne started with the)-2.5 E F1(\255\255login)2.5 E F0(option.)2.5 E(An)
+108 492 Q F2(inter)2.734 E(active)-.15 E F0 .234
+(shell is one started without non-option ar)2.734 F .234
+(guments \(unless)-.18 F F1<ad73>2.734 E F0 .233
+(is speci\214ed\) and without the)2.734 F F1<ad63>2.733 E F0 .509(optio\
+n whose standard input and error are both connected to terminals \(as d\
+etermined by)108 504 R F2(isatty)3.019 E F0 .509(\(3\)\), or one).32 F
+.946(started with the)108 516 R F1<ad69>3.445 E F0(option.)3.445 E F3
+(PS1)5.945 E F0 .945(is set and)3.195 F F1<24ad>3.445 E F0(includes)
+3.445 E F1(i)3.445 E F0(if)3.445 E F1(bash)3.445 E F0 .945(is interacti)
+3.445 F -.15(ve)-.25 G 3.445(,a).15 G(llo)-3.445 E .945
+(wing a shell script or a)-.25 F(startup \214le to test this state.)108
+528 Q .032(The follo)108 544.8 R .032(wing paragraphs describe ho)-.25 F
+(w)-.25 E F1(bash)2.532 E F0 -.15(exe)2.532 G .032
+(cutes its startup \214les.).15 F .032(If an)5.032 F 2.532(yo)-.15 G
+2.532(ft)-2.532 G .032(he \214les e)-2.532 F .033(xist b)-.15 F .033
+(ut cannot be)-.2 F(read,)108 556.8 Q F1(bash)2.6 E F0 .1
+(reports an error)2.6 F 5.1(.T)-.55 G .1(ildes are e)-5.45 F .099
+(xpanded in \214lenames as described belo)-.15 F 2.599(wu)-.25 G(nder)
+-2.599 E F1 -.18(Ti)2.599 G .099(lde Expansion).18 F F0(in)2.599 E(the)
+108 568.8 Q F3(EXP)2.5 E(ANSION)-.666 E F0(section.)2.25 E(When)108
+585.6 Q F1(bash)2.895 E F0 .395(is in)2.895 F -.2(vo)-.4 G -.1(ke).2 G
+2.895(da).1 G 2.895(sa)-2.895 G 2.895(ni)-2.895 G(nteracti)-2.895 E .695
+-.15(ve l)-.25 H .396(ogin shell, or as a non-interacti).15 F .696 -.15
+(ve s)-.25 H .396(hell with the).15 F F1(\255\255login)2.896 E F0 .396
+(option, it)2.896 F 1.334(\214rst reads and e)108 597.6 R -.15(xe)-.15 G
+1.334(cutes commands from the \214le).15 F F2(/etc/pr)3.834 E(o\214le)
+-.45 E F0 3.834(,i)C 3.833(ft)-3.834 G 1.333(hat \214le e)-3.833 F 3.833
+(xists. After)-.15 F 1.333(reading that \214le, it)3.833 F .248
+(looks for)108 609.6 R F2(~/.bash_pr)2.748 E(o\214le)-.45 E F0(,)A F2
+(~/.bash_lo)2.748 E(gin)-.1 E F0 2.748(,a)C(nd)-2.748 E F2(~/.pr)2.748 E
+(o\214le)-.45 E F0 2.748(,i)C 2.749(nt)-2.748 G .249(hat order)-2.749 F
+2.749(,a)-.4 G .249(nd reads and e)-2.749 F -.15(xe)-.15 G .249
+(cutes commands from).15 F .076(the \214rst one that e)108 621.6 R .076
+(xists and is readable.)-.15 F(The)5.076 E F1(\255\255nopr)2.576 E
+(o\214le)-.18 E F0 .076
+(option may be used when the shell is started to in-)2.576 F
+(hibit this beha)108 633.6 Q(vior)-.2 E(.)-.55 E 1.104
+(When an interacti)108 650.4 R 1.404 -.15(ve l)-.25 H 1.104
+(ogin shell e).15 F 1.104(xits, or a non-interacti)-.15 F 1.404 -.15
+(ve l)-.25 H 1.104(ogin shell e).15 F -.15(xe)-.15 G 1.104(cutes the).15
+F F1(exit)3.604 E F0 -.2(bu)3.604 G 1.104(iltin command,).2 F F1(bash)
+108 662.4 Q F0(reads and e)2.5 E -.15(xe)-.15 G
+(cutes commands from the \214le).15 E F2(~/.bash_lo)2.5 E(gout)-.1 E F0
+2.5(,i)C 2.5(fi)-2.5 G 2.5(te)-2.5 G(xists.)-2.65 E 1.698
+(When an interacti)108 679.2 R 1.998 -.15(ve s)-.25 H 1.698
+(hell that is not a login shell is started,).15 F F1(bash)4.197 E F0
+1.697(reads and e)4.197 F -.15(xe)-.15 G 1.697(cutes commands from).15 F
+F2(~/.bashr)108 691.2 Q(c)-.37 E F0 2.535(,i)C 2.535(ft)-2.535 G .035
+(hat \214le e)-2.535 F 2.535(xists. This)-.15 F .036
+(may be inhibited by using the)2.535 F F1<adad6e6f72>2.536 E(c)-.18 E F0
+2.536(option. The)2.536 F F1<adad72>2.536 E(c\214le)-.18 E F2(\214le)
+2.536 E F0 .036(option will)2.536 F(force)108 703.2 Q F1(bash)2.5 E F0
+(to read and e)2.5 E -.15(xe)-.15 G(cute commands from).15 E F2(\214le)
+2.5 E F0(instead of)2.5 E F2(~/.bashr)2.5 E(c)-.37 E F0(.)A(When)108 720
+Q F1(bash)5.306 E F0 2.806(is started non-interacti)5.306 F -.15(ve)-.25
+G(ly).15 E 5.306(,t)-.65 G 5.306(or)-5.306 G 2.806
+(un a shell script, for e)-5.306 F 2.805(xample, it looks for the v)-.15
+F(ariable)-.25 E(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(2)
+195.395 E 0 Cg EP
+%%Page: 3 3
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 9/Times-Bold@0
+SF -.27(BA)108 84 S(SH_ENV).27 E F0 1.01(in the en)3.26 F 1.01
+(vironment, e)-.4 F 1.01(xpands its v)-.15 F 1.01
+(alue if it appears there, and uses the e)-.25 F 1.011(xpanded v)-.15 F
+1.011(alue as the)-.25 F(name of a \214le to read and e)108 96 Q -.15
+(xe)-.15 G(cute.).15 E/F2 10/Times-Bold@0 SF(Bash)5 E F0(beha)2.5 E -.15
+(ve)-.2 G 2.5(sa).15 G 2.5(si)-2.5 G 2.5(ft)-2.5 G(he follo)-2.5 E
+(wing command were e)-.25 E -.15(xe)-.15 G(cuted:).15 E/F3 10/Courier@0
+SF(if [ \255n "$BASH_ENV" ]; then . "$BASH_ENV"; fi)144 114 Q F0 -.2(bu)
+108 132 S 2.5(tt).2 G(he v)-2.5 E(alue of the)-.25 E F1 -.666(PA)2.5 G
+(TH)-.189 E F0 -.25(va)2.25 G
+(riable is not used to search for the \214lename.).25 E(If)108 148.8 Q
+F2(bash)3.417 E F0 .917(is in)3.417 F -.2(vo)-.4 G -.1(ke).2 G 3.417(dw)
+.1 G .917(ith the name)-3.417 F F2(sh)3.417 E F0 3.417(,i)C 3.417(tt)
+-3.417 G .917(ries to mimic the startup beha)-3.417 F .917
+(vior of historical v)-.2 F .917(ersions of)-.15 F F2(sh)3.417 E F0(as)
+3.417 E .145
+(closely as possible, while conforming to the POSIX standard as well.)
+108 160.8 R .145(When in)5.145 F -.2(vo)-.4 G -.1(ke).2 G 2.645(da).1 G
+2.645(sa)-2.645 G 2.645(ni)-2.645 G(nteracti)-2.645 E .445 -.15(ve l)
+-.25 H(ogin).15 E 1.264(shell, or a non-interacti)108 172.8 R 1.564 -.15
+(ve s)-.25 H 1.264(hell with the).15 F F2(\255\255login)3.764 E F0 1.264
+(option, it \214rst attempts to read and e)3.764 F -.15(xe)-.15 G 1.263
+(cute commands).15 F(from)108 184.8 Q/F4 10/Times-Italic@0 SF(/etc/pr)
+4.173 E(o\214le)-.45 E F0(and)3.203 E F4(~/.pr)2.523 E(o\214le)-.45 E F0
+3.023(,i).18 G 3.024(nt)-3.023 G .524(hat order)-3.024 F 5.524(.T)-.55 G
+(he)-5.524 E F2(\255\255nopr)3.024 E(o\214le)-.18 E F0 .524
+(option may be used to inhibit this beha)3.024 F(vior)-.2 E(.)-.55 E
+.418(When in)108 196.8 R -.2(vo)-.4 G -.1(ke).2 G 2.918(da).1 G 2.918
+(sa)-2.918 G 2.918(ni)-2.918 G(nteracti)-2.918 E .718 -.15(ve s)-.25 H
+.418(hell with the name).15 F F2(sh)2.918 E F0(,)A F2(bash)2.918 E F0
+.418(looks for the v)2.918 F(ariable)-.25 E F1(ENV)2.918 E/F5 9
+/Times-Roman@0 SF(,)A F0 -.15(ex)2.667 G .417(pands its v).15 F(alue)
+-.25 E .171(if it is de\214ned, and uses the e)108 208.8 R .171
+(xpanded v)-.15 F .171(alue as the name of a \214le to read and e)-.25 F
+-.15(xe)-.15 G 2.671(cute. Since).15 F 2.671(as)2.671 G .171(hell in)
+-2.671 F -.2(vo)-.4 G -.1(ke).2 G(d).1 E(as)108 220.8 Q F2(sh)3.081 E F0
+.581(does not attempt to read and e)3.081 F -.15(xe)-.15 G .581
+(cute commands from an).15 F 3.08(yo)-.15 G .58
+(ther startup \214les, the)-3.08 F F2<adad72>3.08 E(c\214le)-.18 E F0
+.58(option has)3.08 F .182(no ef)108 232.8 R 2.682(fect. A)-.25 F
+(non-interacti)2.682 E .482 -.15(ve s)-.25 H .182(hell in).15 F -.2(vo)
+-.4 G -.1(ke).2 G 2.682(dw).1 G .182(ith the name)-2.682 F F2(sh)2.682 E
+F0 .182(does not attempt to read an)2.682 F 2.683(yo)-.15 G .183
+(ther startup \214les.)-2.683 F(When in)108 244.8 Q -.2(vo)-.4 G -.1(ke)
+.2 G 2.5(da).1 G(s)-2.5 E F2(sh)2.5 E F0(,)A F2(bash)2.5 E F0(enters)2.5
+E F4(posix)3.75 E F0(mode after the startup \214les are read.)3.03 E
+(When)108 261.6 Q F2(bash)2.727 E F0 .226(is started in)2.727 F F4
+(posix)3.976 E F0 .226(mode, as with the)3.256 F F2(\255\255posix)2.726
+E F0 .226(command line option, it follo)2.726 F .226(ws the POSIX stan-)
+-.25 F .341(dard for startup \214les.)108 273.6 R .341
+(In this mode, interacti)5.341 F .641 -.15(ve s)-.25 H .341(hells e).15
+F .341(xpand the)-.15 F F1(ENV)2.841 E F0 -.25(va)2.591 G .342
+(riable and commands are read and).25 F -.15(exe)108 285.6 S
+(cuted from the \214le whose name is the e).15 E(xpanded v)-.15 E 2.5
+(alue. No)-.25 F(other startup \214les are read.)2.5 E F2(Bash)108 302.4
+Q F0 .224(attempts to determine when it is being run with its standard \
+input connected to a netw)2.724 F .223(ork connection,)-.1 F .025
+(as when e)108 314.4 R -.15(xe)-.15 G .025
+(cuted by the remote shell daemon, usually).15 F F4 -.1(rs)2.525 G(hd).1
+E F0 2.525(,o)C 2.525(rt)-2.525 G .025(he secure shell daemon)-2.525 F
+F4(sshd)2.525 E F0 5.025(.I)C(f)-5.025 E F2(bash)2.525 E F0(deter)2.525
+E(-)-.2 E .134(mines it is being run in this f)108 326.4 R .134
+(ashion, it reads and e)-.1 F -.15(xe)-.15 G .133(cutes commands from)
+.15 F F4(~/.bashr)2.633 E(c)-.37 E F0 2.633(,i)C 2.633(ft)-2.633 G .133
+(hat \214le e)-2.633 F .133(xists and is)-.15 F 2.869(readable. It)108
+338.4 R .369(will not do this if in)2.869 F -.2(vo)-.4 G -.1(ke).2 G
+2.869(da).1 G(s)-2.869 E F2(sh)2.869 E F0 5.369(.T)C(he)-5.369 E F2
+<adad6e6f72>2.869 E(c)-.18 E F0 .369
+(option may be used to inhibit this beha)2.869 F(vior)-.2 E 2.869(,a)-.4
+G(nd)-2.869 E(the)108 350.4 Q F2<adad72>2.919 E(c\214le)-.18 E F0 .419
+(option may be used to force another \214le to be read, b)2.919 F .419
+(ut neither)-.2 F F4 -.1(rs)2.919 G(hd).1 E F0(nor)2.919 E F4(sshd)2.919
+E F0 .418(generally in)2.919 F -.2(vo)-.4 G -.1(ke).2 G
+(the shell with those options or allo)108 362.4 Q 2.5(wt)-.25 G
+(hem to be speci\214ed.)-2.5 E .433(If the shell is started with the ef)
+108 379.2 R(fecti)-.25 E .733 -.15(ve u)-.25 H .433
+(ser \(group\) id not equal to the real user \(group\) id, and the).15 F
+F2<ad70>2.934 E F0(op-)2.934 E 1.124(tion is not supplied, no startup \
+\214les are read, shell functions are not inherited from the en)108
+391.2 R 1.124(vironment, the)-.4 F F1(SHELLOPTS)108 403.2 Q F5(,)A F1
+-.27(BA)2.959 G(SHOPTS).27 E F5(,)A F1(CDP)2.959 E -.855(AT)-.666 G(H)
+.855 E F5(,)A F0(and)2.959 E F1(GLOBIGNORE)3.209 E F0 -.25(va)2.959 G
+.709(riables, if the).25 F 3.209(ya)-.15 G .71(ppear in the en)-3.209 F
+.71(vironment, are)-.4 F .905(ignored, and the ef)108 415.2 R(fecti)-.25
+E 1.205 -.15(ve u)-.25 H .904(ser id is set to the real user id.).15 F
+.904(If the)5.904 F F2<ad70>3.404 E F0 .904(option is supplied at in)
+3.404 F -.2(vo)-.4 G .904(cation, the).2 F(startup beha)108 427.2 Q
+(vior is the same, b)-.2 E(ut the ef)-.2 E(fecti)-.25 E .3 -.15(ve u)
+-.25 H(ser id is not reset.).15 E/F6 10.95/Times-Bold@0 SF(DEFINITIONS)
+72 444 Q F0(The follo)108 456 Q
+(wing de\214nitions are used throughout the rest of this document.)-.25
+E F2(blank)108 468 Q F0 2.5(As)144 468 S(pace or tab)-2.5 E(.)-.4 E F2
+-.1(wo)108 480 S(rd).1 E F0 2.5(As)144 480 S
+(equence of characters considered as a single unit by the shell.)-2.5 E
+(Also kno)5 E(wn as a)-.25 E F2(tok)2.5 E(en)-.1 E F0(.)A F2(name)108
+492 Q F0(A)144 492 Q F4(wor)3.005 E(d)-.37 E F0 .165
+(consisting only of alphanumeric characters and underscores, and be)
+3.435 F .166(ginning with an alpha-)-.15 F
+(betic character or an underscore.)144 504 Q(Also referred to as an)5 E
+F2(identi\214er)2.5 E F0(.)A F2(metacharacter)108 516 Q F0 2.5(Ac)144
+528 S(haracter that, when unquoted, separates w)-2.5 E 2.5(ords. One)-.1
+F(of the follo)2.5 E(wing:)-.25 E F2 5(|&;\(\)<>s)144 540 S 2.5
+(pace tab newline)-5 F(contr)108 552 Q(ol operator)-.18 E F0(A)144 564 Q
+F4(tok)2.5 E(en)-.1 E F0(that performs a control function.)2.5 E
+(It is one of the follo)5 E(wing symbols:)-.25 E F2 2.5
+(|| & && ; ;; ;& ;;& \( \) | |&)144 576 R(<newline>)10 E F6(RESER)72
+592.8 Q(VED W)-.602 E(ORDS)-.11 E F4 .307(Reserved wor)108 604.8 R(ds)
+-.37 E F0 .307(are w)2.807 F .307(ords that ha)-.1 F .607 -.15(ve a s)
+-.2 H .306(pecial meaning to the shell.).15 F .306(The follo)5.306 F
+.306(wing w)-.25 F .306(ords are recognized as)-.1 F(reserv)108 616.8 Q
+.313(ed when unquoted and either the \214rst w)-.15 F .314
+(ord of a command \(see)-.1 F F1 .314(SHELL GRAMMAR)2.814 F F0(belo)
+2.564 E .314(w\), the third)-.25 F -.1(wo)108 628.8 S .644(rd of a).1 F
+F2(case)3.144 E F0(or)3.144 E F2(select)3.143 E F0 .643(command \(only)
+3.143 F F2(in)3.143 E F0 .643(is v)3.143 F .643(alid\), or the third w)
+-.25 F .643(ord of a)-.1 F F2 -.25(fo)3.143 G(r).25 E F0 .643
+(command \(only)3.143 F F2(in)3.143 E F0(and)3.143 E F2(do)3.143 E F0
+(are v)108 640.8 Q(alid\):)-.25 E F2 11.295(!c)144 657.6 S 8.795
+(ase copr)-11.295 F 8.795(oc do done elif else esac \214 f)-.18 F 8.795
+(or function if in select then)-.25 F 7.5(until while { } time [[ ]])144
+669.6 R F6(SHELL GRAMMAR)72 686.4 Q F2(Simple Commands)87 698.4 Q F0(A)
+108 710.4 Q F4 .389(simple command)2.889 F F0 .389
+(is a sequence of optional v)2.889 F .388(ariable assignments follo)-.25
+F .388(wed by)-.25 F F2(blank)2.888 E F0 .388(-separated w)B .388
+(ords and)-.1 F .815(redirections, and terminated by a)108 722.4 R F4
+(contr)3.315 E .815(ol oper)-.45 F(ator)-.15 E F0 5.815(.T)C .815
+(he \214rst w)-5.815 F .816(ord speci\214es the command to be e)-.1 F
+-.15(xe)-.15 G(cuted,).15 E(GNU Bash 5.1)72 768 Q(2020 October 29)
+141.235 E(3)195.395 E 0 Cg EP
+%%Page: 4 4
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E
+(and is passed as ar)108 84 Q(gument zero.)-.18 E(The remaining w)5 E
+(ords are passed as ar)-.1 E(guments to the in)-.18 E -.2(vo)-.4 G -.1
+(ke).2 G 2.5(dc).1 G(ommand.)-2.5 E(The return v)108 100.8 Q(alue of a)
+-.25 E/F1 10/Times-Italic@0 SF(simple command)2.5 E F0(is its e)2.5 E
+(xit status, or 128+)-.15 E F1(n)A F0
+(if the command is terminated by signal)3.333 E F1(n)2.86 E F0(.).24 E
+/F2 10/Times-Bold@0 SF(Pipelines)87 117.6 Q F0(A)108 129.6 Q F1
+(pipeline)2.996 E F0 .496(is a sequence of one or more commands separat\
+ed by one of the control operators)2.996 F F2(|)2.996 E F0(or)2.996 E F2
+(|&)2.996 E F0 5.496(.T)C(he)-5.496 E(format for a pipeline is:)108
+141.6 Q([)144 158.4 Q F2(time)A F0([)2.5 E F2<ad70>A F0(]] [ ! ])A F1
+(command)2.5 E F0 2.5([[)2.5 G F2(|)-2.5 E/F3 10/Symbol SF<ef>A F2(|&)A
+F0(])A F1(command2)2.5 E F0(... ])2.5 E .231(The standard output of)108
+175.2 R F1(command)2.931 E F0 .232
+(is connected via a pipe to the standard input of)3.502 F F1(command2)
+2.932 E F0 5.232(.T).02 G .232(his connec-)-5.232 F .643
+(tion is performed before an)108 187.2 R 3.143(yr)-.15 G .642
+(edirections speci\214ed by the command \(see)-3.143 F/F4 9/Times-Bold@0
+SF(REDIRECTION)3.142 E F0(belo)2.892 E 3.142(w\). If)-.25 F F2(|&)3.142
+E F0(is)3.142 E(used,)108 199.2 Q F1(command)2.663 E F0 1.263 -.55('s s)
+D .163(tandard error).55 F 2.663(,i)-.4 G 2.663(na)-2.663 G .163
+(ddition to its standard output, is connected to)-2.663 F F1(command2)
+2.664 E F0 1.264 -.55('s s)D .164(tandard in-).55 F .438
+(put through the pipe; it is shorthand for)108 211.2 R F2 .437(2>&1 |)
+2.937 F F0 5.437(.T)C .437
+(his implicit redirection of the standard error to the stan-)-5.437 F
+(dard output is performed after an)108 223.2 Q 2.5(yr)-.15 G
+(edirections speci\214ed by the command.)-2.5 E .48
+(The return status of a pipeline is the e)108 240 R .48
+(xit status of the last command, unless the)-.15 F F2(pipefail)2.98 E F0
+.48(option is enabled.)2.98 F(If)108 252 Q F2(pipefail)2.687 E F0 .187
+(is enabled, the pipeline')2.687 F 2.687(sr)-.55 G .186
+(eturn status is the v)-2.687 F .186
+(alue of the last \(rightmost\) command to e)-.25 F .186(xit with a)-.15
+F .61(non-zero status, or zero if all commands e)108 264 R .611
+(xit successfully)-.15 F 5.611(.I)-.65 G 3.111(ft)-5.611 G .611
+(he reserv)-3.111 F .611(ed w)-.15 F(ord)-.1 E F2(!)3.111 E F0 .611
+(precedes a pipeline, the)5.611 F -.15(ex)108 276 S .55
+(it status of that pipeline is the logical ne).15 F -.05(ga)-.15 G .55
+(tion of the e).05 F .55(xit status as described abo)-.15 F -.15(ve)-.15
+G 5.55(.T).15 G .55(he shell w)-5.55 F .55(aits for)-.1 F
+(all commands in the pipeline to terminate before returning a v)108 288
+Q(alue.)-.25 E .298(If the)108 304.8 R F2(time)2.799 E F0(reserv)2.799 E
+.299(ed w)-.15 F .299(ord precedes a pipeline, the elapsed as well as u\
+ser and system time consumed by its)-.1 F -.15(exe)108 316.8 S .14
+(cution are reported when the pipeline terminates.).15 F(The)5.139 E F2
+<ad70>2.639 E F0 .139(option changes the output format to that spec-)
+2.639 F .302(i\214ed by POSIX.)108 328.8 R .303(When the shell is in)
+5.302 F F1 .303(posix mode)2.803 F F0 2.803(,i)C 2.803(td)-2.803 G .303
+(oes not recognize)-2.803 F F2(time)2.803 E F0 .303(as a reserv)2.803 F
+.303(ed w)-.15 F .303(ord if the ne)-.1 F(xt)-.15 E(tok)108 340.8 Q .736
+(en be)-.1 F .736(gins with a `-'.)-.15 F(The)5.736 E F4(TIMEFORMA)3.236
+E(T)-.855 E F0 -.25(va)2.986 G .736
+(riable may be set to a format string that speci\214es ho).25 F 3.235
+(wt)-.25 G(he)-3.235 E .879
+(timing information should be displayed; see the description of)108
+352.8 R F4(TIMEFORMA)3.38 E(T)-.855 E F0(under)3.13 E F2 .88(Shell V)
+3.38 F(ariables)-.92 E F0(be-)3.38 E(lo)108 364.8 Q -.65(w.)-.25 G .162
+(When the shell is in)108 381.6 R F1 .162(posix mode)2.662 F F0(,)A F2
+(time)2.662 E F0 .162(may be follo)2.662 F .161(wed by a ne)-.25 F 2.661
+(wline. In)-.25 F .161(this case, the shell displays the to-)2.661 F
+.243(tal user and system time consumed by the shell and its children.)
+108 393.6 R(The)5.243 E F4(TIMEFORMA)2.743 E(T)-.855 E F0 -.25(va)2.493
+G .243(riable may be used).25 F
+(to specify the format of the time information.)108 405.6 Q .656
+(Each command in a pipeline is e)108 422.4 R -.15(xe)-.15 G .655
+(cuted as a separate process \(i.e., in a subshell\).).15 F(See)5.655 E
+F4 .655(COMMAND EXE-)3.155 F .05(CUTION ENVIR)108 434.4 R(ONMENT)-.27 E
+F0 .051(for a description of a subshell en)2.3 F 2.551(vironment. If)-.4
+F(the)2.551 E F2(lastpipe)2.551 E F0 .051(option is enabled us-)2.551 F
+.416(ing the)108 446.4 R F2(shopt)2.916 E F0 -.2(bu)2.916 G .416
+(iltin \(see the description of).2 F F2(shopt)2.916 E F0(belo)2.916 E
+.416(w\), the last element of a pipeline may be run by the)-.25 F
+(shell process.)108 458.4 Q F2(Lists)87 475.2 Q F0(A)108 487.2 Q F1
+(list)2.849 E F0 .349(is a sequence of one or more pipelines separated \
+by one of the operators)2.849 F F2(;)2.85 E F0(,)A F2(&)2.85 E F0(,)A F2
+(&&)2.85 E F0 2.85(,o)C(r)-2.85 E F2(||)2.85 E F0 2.85(,a)C .35
+(nd option-)-2.85 F(ally terminated by one of)108 499.2 Q F2(;)2.5 E F0
+(,)A F2(&)2.5 E F0 2.5(,o)C(r)-2.5 E F2(<newline>)2.5 E F0(.)A .961
+(Of these list operators,)108 516 R F2(&&)3.461 E F0(and)3.461 E F2(||)
+3.461 E F0(ha)3.461 E 1.261 -.15(ve e)-.2 H .961(qual precedence, follo)
+.15 F .96(wed by)-.25 F F2(;)3.46 E F0(and)3.46 E F2(&)3.46 E F0 3.46
+(,w)C .96(hich ha)-3.46 F 1.26 -.15(ve e)-.2 H .96(qual prece-).15 F
+(dence.)108 528 Q 2.5(As)108 544.8 S(equence of one or more ne)-2.5 E
+(wlines may appear in a)-.25 E F1(list)2.5 E F0
+(instead of a semicolon to delimit commands.)2.5 E .029
+(If a command is terminated by the control operator)108 561.6 R F2(&)
+2.529 E F0 2.529(,t)C .029(he shell e)-2.529 F -.15(xe)-.15 G .029
+(cutes the command in the).15 F F1(bac)2.529 E(kgr)-.2 E(ound)-.45 E F0
+(in)2.529 E 2.678(as)108 573.6 S 2.678(ubshell. The)-2.678 F .178
+(shell does not w)2.678 F .178
+(ait for the command to \214nish, and the return status is 0.)-.1 F .178
+(These are referred)5.178 F .778(to as)108 585.6 R F1(async)3.278 E(hr)
+-.15 E(onous)-.45 E F0 3.278(commands. Commands)3.278 F .779
+(separated by a)3.278 F F2(;)3.279 E F0 .779(are e)3.279 F -.15(xe)-.15
+G .779(cuted sequentially; the shell w).15 F .779(aits for)-.1 F
+(each command to terminate in turn.)108 597.6 Q
+(The return status is the e)5 E(xit status of the last command e)-.15 E
+-.15(xe)-.15 G(cuted.).15 E .172(AND and OR lists are sequences of one \
+or more pipelines separated by the)108 614.4 R F2(&&)2.671 E F0(and)
+2.671 E F2(||)2.671 E F0 .171(control operators, re-)2.671 F(specti)108
+626.4 Q -.15(ve)-.25 G(ly).15 E 5(.A)-.65 G(ND and OR lists are e)-5 E
+-.15(xe)-.15 G(cuted with left associati).15 E(vity)-.25 E 5(.A)-.65 G
+2.5(nA)-5 G(ND list has the form)-2.5 E F1(command1)144 643.2 Q F2(&&)
+2.5 E F1(command2)2.5 E(command2)108.2 660 Q F0(is e)2.52 E -.15(xe)-.15
+G(cuted if, and only if,).15 E F1(command1)2.7 E F0(returns an e)2.5 E
+(xit status of zero \(success\).)-.15 E(An OR list has the form)108
+676.8 Q F1(command1)144 693.6 Q F2(||)2.5 E F1(command2)2.5 E(command2)
+108.2 710.4 Q F0 .434(is e)2.954 F -.15(xe)-.15 G .434
+(cuted if, and only if,).15 F F1(command1)3.135 E F0 .435
+(returns a non-zero e)2.935 F .435(xit status.)-.15 F .435
+(The return status of AND)5.435 F(and OR lists is the e)108 722.4 Q
+(xit status of the last command e)-.15 E -.15(xe)-.15 G
+(cuted in the list.).15 E(GNU Bash 5.1)72 768 Q(2020 October 29)141.235
+E(4)195.395 E 0 Cg EP
+%%Page: 5 5
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(Compound Commands)87 84 Q F0(A)108 96 Q/F2 10/Times-Italic@0 SF 1.054
+(compound command)3.554 F F0 1.054(is one of the follo)3.554 F 3.553
+(wing. In)-.25 F 1.053(most cases a)3.553 F F2(list)3.553 E F0 1.053
+(in a command')3.553 F 3.553(sd)-.55 G 1.053(escription may be)-3.553 F
+1.026(separated from the rest of the command by one or more ne)108 108 R
+1.026(wlines, and may be follo)-.25 F 1.027(wed by a ne)-.25 F 1.027
+(wline in)-.25 F(place of a semicolon.)108 120 Q(\()108 136.8 Q F2(list)
+A F0(\))A F2(list)144 136.8 Q F0 .011(is e)2.512 F -.15(xe)-.15 G .011
+(cuted in a subshell en).15 F .011(vironment \(see)-.4 F/F3 9
+/Times-Bold@0 SF .011(COMMAND EXECUTION ENVIR)2.511 F(ONMENT)-.27 E F0
+(belo)2.261 E(w\).)-.25 E -1.11(Va)144 148.8 S .016
+(riable assignments and b)1.11 F .016(uiltin commands that af)-.2 F .016
+(fect the shell')-.25 F 2.517(se)-.55 G -.4(nv)-2.517 G .017
+(ironment do not remain in ef-).4 F(fect after the command completes.)
+144 160.8 Q(The return status is the e)5 E(xit status of)-.15 E F2(list)
+2.5 E F0(.)A({)108 177.6 Q F2(list)2.5 E F0 2.5(;})C F2(list)144 177.6 Q
+F0 .402(is simply e)2.902 F -.15(xe)-.15 G .401
+(cuted in the current shell en).15 F(vironment.)-.4 E F2(list)5.401 E F0
+.401(must be terminated with a ne)2.901 F .401(wline or)-.25 F 3.214
+(semicolon. This)144 189.6 R .714(is kno)3.214 F .714(wn as a)-.25 F F2
+(gr)3.215 E .715(oup command)-.45 F F0 5.715(.T)C .715
+(he return status is the e)-5.715 F .715(xit status of)-.15 F F2(list)
+3.215 E F0 5.715(.N)C(ote)-5.715 E .22(that unlik)144 201.6 R 2.72(et)
+-.1 G .22(he metacharacters)-2.72 F F1(\()2.72 E F0(and)2.72 E F1(\))
+2.72 E F0(,)A F1({)2.72 E F0(and)2.72 E F1(})2.719 E F0(are)2.719 E F2
+-.37(re)2.719 G .219(served wor).37 F(ds)-.37 E F0 .219
+(and must occur where a reserv)2.719 F(ed)-.15 E -.1(wo)144 213.6 S .256
+(rd is permitted to be recognized.).1 F .256(Since the)5.256 F 2.756(yd)
+-.15 G 2.756(on)-2.756 G .257(ot cause a w)-2.756 F .257(ord break, the)
+-.1 F 2.757(ym)-.15 G .257(ust be separated)-2.757 F(from)144 225.6 Q F2
+(list)2.5 E F0(by whitespace or another shell metacharacter)2.5 E(.)-.55
+E(\(\()108 242.4 Q F2 -.2(ex)C(pr).2 E(ession)-.37 E F0(\)\))A(The)144
+254.4 Q F2 -.2(ex)2.552 G(pr).2 E(ession)-.37 E F0 .052(is e)2.552 F
+-.25(va)-.25 G .051(luated according to the rules described belo).25 F
+2.551(wu)-.25 G(nder)-2.551 E F3 .051(ARITHMETIC EV)2.551 F(ALU)-1.215 E
+(A-)-.54 E(TION)144 266.4 Q/F4 9/Times-Roman@0 SF(.)A F0 .411(If the v)
+4.91 F .411(alue of the e)-.25 F .411(xpression is non-zero, the return\
+ status is 0; otherwise the return status)-.15 F(is 1.)144 278.4 Q
+(This is e)5 E(xactly equi)-.15 E -.25(va)-.25 G(lent to).25 E F1(let ")
+2.5 E F2 -.2(ex)C(pr).2 E(ession)-.37 E F1(")A F0(.)A F1([[)108 295.2 Q
+F2 -.2(ex)2.5 G(pr).2 E(ession)-.37 E F1(]])2.5 E F0 .003
+(Return a status of 0 or 1 depending on the e)144 307.2 R -.25(va)-.25 G
+.003(luation of the conditional e).25 F(xpression)-.15 E F2 -.2(ex)2.503
+G(pr).2 E(ession)-.37 E F0 5.003(.E)C(x-)-5.003 E .758
+(pressions are composed of the primaries described belo)144 319.2 R
+3.259(wu)-.25 G(nder)-3.259 E F3(CONDITION)3.259 E .759(AL EXPRESSIONS)
+-.18 F F4(.)A F0 -.8(Wo)144 331.2 S .029(rd splitting and pathname e).8
+F .029(xpansion are not performed on the w)-.15 F .029(ords between the)
+-.1 F F1([[)2.528 E F0(and)2.528 E F1(]])2.528 E F0 2.528(;t)C(ilde)
+-2.528 E -.15(ex)144 343.2 S 3.968(pansion, parameter and v).15 F 3.969
+(ariable e)-.25 F 3.969(xpansion, arithmetic e)-.15 F 3.969
+(xpansion, command substitution,)-.15 F .571
+(process substitution, and quote remo)144 355.2 R -.25(va)-.15 G 3.071
+(la).25 G .571(re performed.)-3.071 F .571
+(Conditional operators such as)5.571 F F1<ad66>3.07 E F0 .57(must be)
+3.07 F(unquoted to be recognized as primaries.)144 367.2 Q
+(When used with)144 385.2 Q F1([[)2.5 E F0 2.5(,t)C(he)-2.5 E F1(<)2.5 E
+F0(and)2.5 E F1(>)2.5 E F0(operators sort le)2.5 E
+(xicographically using the current locale.)-.15 E .502(When the)144
+403.2 R F1(==)3.002 E F0(and)3.002 E F1(!=)3.002 E F0 .502(operators ar\
+e used, the string to the right of the operator is considered a pat-)
+3.002 F .81(tern and matched according to the rules described belo)144
+415.2 R 3.31(wu)-.25 G(nder)-3.31 E F1 -.1(Pa)3.31 G(tter).1 E 3.31(nM)
+-.15 G(atching)-3.31 E F0 3.31(,a)C 3.31(si)-3.31 G 3.31(ft)-3.31 G(he)
+-3.31 E F1(ext-)3.31 E(glob)144 427.2 Q F0 .313
+(shell option were enabled.)2.813 F(The)5.313 E F1(=)2.813 E F0 .313
+(operator is equi)2.813 F -.25(va)-.25 G .313(lent to).25 F F1(==)2.813
+E F0 5.313(.I)C 2.813(ft)-5.313 G(he)-2.813 E F1(nocasematch)2.813 E F0
+.314(shell op-)2.814 F .03
+(tion is enabled, the match is performed without re)144 439.2 R -.05(ga)
+-.15 G .029(rd to the case of alphabetic characters.).05 F .029(The re-)
+5.029 F .258(turn v)144 451.2 R .259(alue is 0 if the string matches \()
+-.25 F F1(==)A F0 2.759(\)o)C 2.759(rd)-2.759 G .259(oes not match \()
+-2.759 F F1(!=)A F0 2.759(\)t)C .259(he pattern, and 1 otherwise.)-2.759
+F(An)5.259 E(y)-.15 E(part of the pattern may be quoted to force the qu\
+oted portion to be matched as a string.)144 463.2 Q .243
+(An additional binary operator)144 481.2 R(,)-.4 E F1(=~)2.743 E F0
+2.743(,i)C 2.743(sa)-2.743 G -.25(va)-2.943 G .243
+(ilable, with the same precedence as).25 F F1(==)2.743 E F0(and)2.743 E
+F1(!=)2.743 E F0 5.243(.W)C .243(hen it is)-5.243 F .182
+(used, the string to the right of the operator is considered a POSIX e)
+144 493.2 R .182(xtended re)-.15 F .182(gular e)-.15 F .182
+(xpression and)-.15 F 2.624(matched accordingly \(using the POSIX)144
+505.2 R F2 -.37(re)5.124 G(gcomp)-.03 E F0(and)5.124 E F2 -.37(re)5.124
+G -.1(ge)-.03 G(xec)-.1 E F0(interf)5.123 E 2.623
+(aces usually described in)-.1 F F2 -.37(re)144 517.2 S -.1(ge)-.03 G(x)
+-.1 E F0 3.271(\(3\)\). The)B .771(return v)3.271 F .772
+(alue is 0 if the string matches the pattern, and 1 otherwise.)-.25 F
+.772(If the re)5.772 F(gular)-.15 E -.15(ex)144 529.2 S .509
+(pression is syntactically incorrect, the conditional e).15 F
+(xpression')-.15 E 3.008(sr)-.55 G .508(eturn v)-3.008 F .508
+(alue is 2.)-.25 F .508(If the)5.508 F F1(nocase-)3.008 E(match)144
+541.2 Q F0 1.307
+(shell option is enabled, the match is performed without re)3.806 F -.05
+(ga)-.15 G 1.307(rd to the case of alphabetic).05 F 3.063
+(characters. An)144 553.2 R 3.063(yp)-.15 G .563(art of the pattern may\
+ be quoted to force the quoted portion to be matched as a)-3.063 F 2.943
+(string. Brack)144 565.2 R .443(et e)-.1 F .443(xpressions in re)-.15 F
+.443(gular e)-.15 F .443(xpressions must be treated carefully)-.15 F
+2.944(,s)-.65 G .444(ince normal quoting)-2.944 F .615
+(characters lose their meanings between brack)144 577.2 R 3.115(ets. If)
+-.1 F .614(the pattern is stored in a shell v)3.115 F .614
+(ariable, quot-)-.25 F(ing the v)144 589.2 Q(ariable e)-.25 E
+(xpansion forces the entire pattern to be matched as a string.)-.15 E
+.838(The pattern will match if it matches an)144 607.2 R 3.338(yp)-.15 G
+.838(art of the string.)-3.338 F .839(Anchor the pattern using the)5.839
+F F1(^)3.339 E F0(and)3.339 E F1($)3.339 E F0(re)144 619.2 Q .847
+(gular e)-.15 F .846
+(xpression operators to force it to match the entire string.)-.15 F .846
+(The array v)5.846 F(ariable)-.25 E F3 -.27(BA)3.346 G(SH_RE-).27 E(MA)
+144 631.2 Q(TCH)-.855 E F0 .321
+(records which parts of the string matched the pattern.)2.571 F .322
+(The element of)5.322 F F3 -.27(BA)2.822 G(SH_REMA).27 E(TCH)-.855 E F0
+.583(with inde)144 643.2 R 3.083(x0)-.15 G .582
+(contains the portion of the string matching the entire re)-.001 F .582
+(gular e)-.15 F 3.082(xpression. Substrings)-.15 F .249
+(matched by parenthesized sube)144 655.2 R .249
+(xpressions within the re)-.15 F .249(gular e)-.15 F .249
+(xpression are sa)-.15 F -.15(ve)-.2 G 2.749(di).15 G 2.75(nt)-2.749 G
+.25(he remaining)-2.75 F F3 -.27(BA)144 667.2 S(SH_REMA).27 E(TCH)-.855
+E F0 1.13(indices. The element of)3.38 F F3 -.27(BA)3.63 G(SH_REMA).27 E
+(TCH)-.855 E F0 1.13(with inde)3.38 F(x)-.15 E F2(n)3.63 E F0 1.13
+(is the portion of the)3.63 F(string matching the)144 679.2 Q F2(n)2.5 E
+F0(th parenthesized sube)A(xpression.)-.15 E .785
+(Expressions may be combined using the follo)144 697.2 R .786
+(wing operators, listed in decreasing order of prece-)-.25 F(dence:)144
+709.2 Q(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(5)195.395 E 0 Cg
+EP
+%%Page: 6 6
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(\()144 84 Q/F2 10/Times-Italic@0 SF -.2(ex)2.5 G(pr).2 E(ession)-.37
+E F1(\))2.5 E F0 .523(Returns the v)180 96 R .522(alue of)-.25 F F2 -.2
+(ex)3.022 G(pr).2 E(ession)-.37 E F0 5.522(.T)C .522
+(his may be used to o)-5.522 F -.15(ve)-.15 G .522
+(rride the normal precedence of).15 F(operators.)180 108 Q F1(!)144 120
+Q F2 -.2(ex)2.5 G(pr).2 E(ession)-.37 E F0 -.35(Tr)180 132 S(ue if).35 E
+F2 -.2(ex)2.5 G(pr).2 E(ession)-.37 E F0(is f)2.74 E(alse.)-.1 E F2 -.2
+(ex)144 144 S(pr).2 E(ession1)-.37 E F1(&&)2.5 E F2 -.2(ex)2.5 G(pr).2 E
+(ession2)-.37 E F0 -.35(Tr)180 156 S(ue if both).35 E F2 -.2(ex)2.5 G
+(pr).2 E(ession1)-.37 E F0(and)2.5 E F2 -.2(ex)2.5 G(pr).2 E(ession2)
+-.37 E F0(are true.)2.52 E F2 -.2(ex)144 168 S(pr).2 E(ession1)-.37 E F1
+(||)2.5 E F2 -.2(ex)2.5 G(pr).2 E(ession2)-.37 E F0 -.35(Tr)180 180 S
+(ue if either).35 E F2 -.2(ex)2.5 G(pr).2 E(ession1)-.37 E F0(or)2.5 E
+F2 -.2(ex)2.5 G(pr).2 E(ession2)-.37 E F0(is true.)2.52 E(The)144 196.8
+Q F1(&&)2.675 E F0(and)2.675 E F1(||)2.675 E F0 .175(operators do not e)
+2.675 F -.25(va)-.25 G(luate).25 E F2 -.2(ex)2.675 G(pr).2 E(ession2)
+-.37 E F0 .175(if the v)2.675 F .175(alue of)-.25 F F2 -.2(ex)2.676 G
+(pr).2 E(ession1)-.37 E F0 .176(is suf)2.676 F .176(\214cient to de-)
+-.25 F(termine the return v)144 208.8 Q
+(alue of the entire conditional e)-.25 E(xpression.)-.15 E F1 -.25(fo)
+108 225.6 S(r).25 E F2(name)2.5 E F0 2.5([[)2.5 G F1(in)A F0([)2.5 E F2
+(wor)2.5 E 2.5(d.)-.37 G(..)-2.5 E F0 2.5(]];])2.5 G F1(do)A F2(list)2.5
+E F0(;)2.5 E F1(done)2.5 E F0 .424(The list of w)144 237.6 R .424
+(ords follo)-.1 F(wing)-.25 E F1(in)2.924 E F0 .423(is e)2.924 F .423
+(xpanded, generating a list of items.)-.15 F .423(The v)5.423 F(ariable)
+-.25 E F2(name)2.923 E F0 .423(is set to)2.923 F .653
+(each element of this list in turn, and)144 249.6 R F2(list)3.153 E F0
+.653(is e)3.153 F -.15(xe)-.15 G .653(cuted each time.).15 F .653
+(If the)5.653 F F1(in)3.153 E F2(wor)3.153 E(d)-.37 E F0 .653
+(is omitted, the)3.153 F F1 -.25(fo)3.153 G(r).25 E F0 .649(command e)
+144 261.6 R -.15(xe)-.15 G(cutes).15 E F2(list)3.149 E F0 .648
+(once for each positional parameter that is set \(see)3.148 F/F3 9
+/Times-Bold@0 SF -.666(PA)3.148 G(RAMETERS).666 E F0(belo)2.898 E(w\).)
+-.25 E .153(The return status is the e)144 273.6 R .153
+(xit status of the last command that e)-.15 F -.15(xe)-.15 G 2.654
+(cutes. If).15 F .154(the e)2.654 F .154(xpansion of the items)-.15 F
+(follo)144 285.6 Q(wing)-.25 E F1(in)2.5 E F0
+(results in an empty list, no commands are e)2.5 E -.15(xe)-.15 G
+(cuted, and the return status is 0.).15 E F1 -.25(fo)108 302.4 S(r).25 E
+F0(\(\()2.5 E F2 -.2(ex)2.5 G(pr1).2 E F0(;)2.5 E F2 -.2(ex)2.5 G(pr2).2
+E F0(;)2.5 E F2 -.2(ex)2.5 G(pr3).2 E F0(\)\) ;)2.5 E F1(do)2.5 E F2
+(list)2.5 E F0(;)2.5 E F1(done)2.5 E F0 1.236(First, the arithmetic e)
+144 314.4 R(xpression)-.15 E F2 -.2(ex)3.736 G(pr1).2 E F0 1.235(is e)
+3.736 F -.25(va)-.25 G 1.235
+(luated according to the rules described belo).25 F 3.735(wu)-.25 G
+(nder)-3.735 E F3 .561(ARITHMETIC EV)144 326.4 R(ALU)-1.215 E -.855(AT)
+-.54 G(ION).855 E/F4 9/Times-Roman@0 SF(.)A F0 .561(The arithmetic e)
+5.061 F(xpression)-.15 E F2 -.2(ex)3.061 G(pr2).2 E F0 .562(is then e)
+3.062 F -.25(va)-.25 G .562(luated repeatedly until).25 F .592(it e)144
+338.4 R -.25(va)-.25 G .592(luates to zero.).25 F .592(Each time)5.592 F
+F2 -.2(ex)3.092 G(pr2).2 E F0 -.25(eva)3.092 G .592
+(luates to a non-zero v).25 F(alue,)-.25 E F2(list)3.092 E F0 .591(is e)
+3.092 F -.15(xe)-.15 G .591(cuted and the arith-).15 F .228(metic e)144
+350.4 R(xpression)-.15 E F2 -.2(ex)2.728 G(pr3).2 E F0 .229(is e)2.728 F
+-.25(va)-.25 G 2.729(luated. If).25 F(an)2.729 E 2.729(ye)-.15 G .229
+(xpression is omitted, it beha)-2.879 F -.15(ve)-.2 G 2.729(sa).15 G
+2.729(si)-2.729 G 2.729(fi)-2.729 G 2.729(te)-2.729 G -.25(va)-2.979 G
+.229(luates to 1.).25 F .228(The return v)144 362.4 R .228
+(alue is the e)-.25 F .228(xit status of the last command in)-.15 F F2
+(list)2.728 E F0 .227(that is e)2.728 F -.15(xe)-.15 G .227(cuted, or f)
+.15 F .227(alse if an)-.1 F 2.727(yo)-.15 G 2.727(ft)-2.727 G(he)-2.727
+E -.15(ex)144 374.4 S(pressions is in).15 E -.25(va)-.4 G(lid.).25 E F1
+(select)108 391.2 Q F2(name)2.5 E F0([)2.5 E F1(in)2.5 E F2(wor)2.5 E(d)
+-.37 E F0 2.5(];)2.5 G F1(do)A F2(list)2.5 E F0(;)2.5 E F1(done)2.5 E F0
+.432(The list of w)144 403.2 R .432(ords follo)-.1 F(wing)-.25 E F1(in)
+2.932 E F0 .432(is e)2.932 F .432(xpanded, generating a list of items.)
+-.15 F .433(The set of e)5.433 F .433(xpanded w)-.15 F(ords)-.1 E .843
+(is printed on the standard error)144 415.2 R 3.342(,e)-.4 G .842
+(ach preceded by a number)-3.342 F 5.842(.I)-.55 G 3.342(ft)-5.842 G(he)
+-3.342 E F1(in)3.342 E F2(wor)3.342 E(d)-.37 E F0 .842
+(is omitted, the posi-)3.342 F .201(tional parameters are printed \(see)
+144 427.2 R F3 -.666(PA)2.701 G(RAMETERS).666 E F0(belo)2.451 E 2.701
+(w\). The)-.25 F F3(PS3)2.701 E F0 .201(prompt is then displayed and a)
+2.451 F .214(line read from the standard input.)144 439.2 R .213
+(If the line consists of a number corresponding to one of the dis-)5.214
+F 1.537(played w)144 451.2 R 1.537(ords, then the v)-.1 F 1.537(alue of)
+-.25 F F2(name)4.397 E F0 1.537(is set to that w)4.217 F 4.037(ord. If)
+-.1 F 1.538(the line is empty)4.038 F 4.038(,t)-.65 G 1.538(he w)-4.038
+F 1.538(ords and)-.1 F .066(prompt are displayed ag)144 463.2 R 2.566
+(ain. If)-.05 F .065(EOF is read, the command completes.)2.566 F(An)
+5.065 E 2.565(yo)-.15 G .065(ther v)-2.565 F .065(alue read causes)-.25
+F F2(name)144.36 475.2 Q F0 .953(to be set to null.)3.633 F .953
+(The line read is sa)5.953 F -.15(ve)-.2 G 3.454(di).15 G 3.454(nt)
+-3.454 G .954(he v)-3.454 F(ariable)-.25 E F3(REPL)3.454 E(Y)-.828 E F4
+(.)A F0(The)5.454 E F2(list)3.544 E F0 .954(is e)4.134 F -.15(xe)-.15 G
+.954(cuted after).15 F .072(each selection until a)144 487.2 R F1(br)
+2.571 E(eak)-.18 E F0 .071(command is e)2.571 F -.15(xe)-.15 G 2.571
+(cuted. The).15 F -.15(ex)2.571 G .071(it status of).15 F F1(select)
+2.571 E F0 .071(is the e)2.571 F .071(xit status of the)-.15 F
+(last command e)144 499.2 Q -.15(xe)-.15 G(cuted in).15 E F2(list)2.59 E
+F0 2.5(,o).68 G 2.5(rz)-2.5 G(ero if no commands were e)-2.5 E -.15(xe)
+-.15 G(cuted.).15 E F1(case)108 516 Q F2(wor)2.5 E(d)-.37 E F1(in)2.5 E
+F0 2.5([[)2.5 G(\(])-2.5 E F2(pattern)2.5 E F0([)2.5 E F1(|)2.5 E F2
+(pattern)2.5 E F0 2.5(].)2.5 G(.. \))-2.5 E F2(list)2.5 E F0(;; ] ...)
+2.5 E F1(esac)2.5 E F0(A)144 528 Q F1(case)3.264 E F0 .764
+(command \214rst e)3.264 F(xpands)-.15 E F2(wor)3.264 E(d)-.37 E F0
+3.264(,a)C .764(nd tries to match it ag)-3.264 F .764(ainst each)-.05 F
+F2(pattern)3.264 E F0 .765(in turn, using the)3.264 F .884
+(matching rules described under)144 540 R F1 -.1(Pa)3.384 G(tter).1 E
+3.384(nM)-.15 G(atching)-3.384 E F0(belo)3.384 E 4.684 -.65(w. T)-.25 H
+(he).65 E F2(wor)3.384 E(d)-.37 E F0 .884(is e)3.384 F .883
+(xpanded using tilde e)-.15 F(x-)-.15 E .95(pansion, parameter and v)144
+552 R .95(ariable e)-.25 F .95(xpansion, arithmetic e)-.15 F .95
+(xpansion, command substitution, process)-.15 F .181
+(substitution and quote remo)144 564 R -.25(va)-.15 G 2.681(l. Each).25
+F F2(pattern)2.681 E F0 -.15(ex)2.681 G .181(amined is e).15 F .181
+(xpanded using tilde e)-.15 F .18(xpansion, param-)-.15 F .103
+(eter and v)144 576 R .103(ariable e)-.25 F .103(xpansion, arithmetic e)
+-.15 F .103(xpansion, command substitution, and process substitution.)
+-.15 F .687(If the)144 588 R F1(nocasematch)3.187 E F0 .687
+(shell option is enabled, the match is performed without re)3.187 F -.05
+(ga)-.15 G .687(rd to the case of).05 F .464(alphabetic characters.)144
+600 R .464(When a match is found, the corresponding)5.464 F F2(list)
+2.964 E F0 .464(is e)2.964 F -.15(xe)-.15 G 2.964(cuted. If).15 F(the)
+2.964 E F1(;;)2.964 E F0(opera-)2.964 E .675(tor is used, no subsequent\
+ matches are attempted after the \214rst pattern match.)144 612 R(Using)
+5.674 E F1(;&)3.174 E F0 .674(in place)3.174 F(of)144 624 Q F1(;;)2.866
+E F0 .366(causes e)2.866 F -.15(xe)-.15 G .366
+(cution to continue with the).15 F F2(list)2.866 E F0 .367
+(associated with the ne)2.866 F .367(xt set of patterns.)-.15 F(Using)
+5.367 E F1(;;&)2.867 E F0 .596(in place of)144 636 R F1(;;)3.096 E F0
+.596(causes the shell to test the ne)3.096 F .595
+(xt pattern list in the statement, if an)-.15 F 1.895 -.65(y, a)-.15 H
+.595(nd e).65 F -.15(xe)-.15 G .595(cute an).15 F(y)-.15 E(associated)
+144 648 Q F2(list)2.96 E F0 .461
+(on a successful match, continuing the case statement e)2.96 F -.15(xe)
+-.15 G .461(cution as if the pattern list).15 F .677(had not matched.)
+144 660 R .677(The e)5.677 F .677
+(xit status is zero if no pattern matches.)-.15 F .676
+(Otherwise, it is the e)5.677 F .676(xit status of)-.15 F
+(the last command e)144 672 Q -.15(xe)-.15 G(cuted in).15 E F2(list)2.5
+E F0(.)A F1(if)108 688.8 Q F2(list)2.5 E F0(;)A F1(then)2.5 E F2(list)
+2.5 E F0 2.5(;[)C F1(elif)A F2(list)2.5 E F0(;)A F1(then)2.5 E F2(list)
+2.5 E F0 2.5(;].)C(.. [)-2.5 E F1(else)2.5 E F2(list)2.5 E F0 2.5(;])C
+F1<8c>A F0(The)144 700.8 Q F1(if)2.977 E F2(list)3.067 E F0 .478(is e)
+3.658 F -.15(xe)-.15 G 2.978(cuted. If).15 F .478(its e)2.978 F .478
+(xit status is zero, the)-.15 F F1(then)2.978 E F2(list)2.978 E F0 .478
+(is e)2.978 F -.15(xe)-.15 G 2.978(cuted. Otherwise,).15 F(each)2.978 E
+F1(elif)2.978 E F2(list)2.978 E F0 1.088(is e)144 712.8 R -.15(xe)-.15 G
+1.088(cuted in turn, and if its e).15 F 1.087
+(xit status is zero, the corresponding)-.15 F F1(then)3.587 E F2(list)
+3.587 E F0 1.087(is e)3.587 F -.15(xe)-.15 G 1.087(cuted and the).15 F
+1.239(command completes.)144 724.8 R 1.239(Otherwise, the)6.239 F F1
+(else)3.739 E F2(list)3.739 E F0 1.239(is e)3.739 F -.15(xe)-.15 G 1.239
+(cuted, if present.).15 F 1.24(The e)6.239 F 1.24(xit status is the e)
+-.15 F(xit)-.15 E(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(6)
+195.395 E 0 Cg EP
+%%Page: 7 7
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E
+(status of the last command e)144 84 Q -.15(xe)-.15 G
+(cuted, or zero if no condition tested true.).15 E/F1 10/Times-Bold@0 SF
+(while)108 100.8 Q/F2 10/Times-Italic@0 SF(list-1)2.5 E F0(;)A F1(do)2.5
+E F2(list-2)2.5 E F0(;)A F1(done)2.5 E(until)108 112.8 Q F2(list-1)2.5 E
+F0(;)A F1(do)2.5 E F2(list-2)2.5 E F0(;)A F1(done)2.5 E F0(The)144 124.8
+Q F1(while)3.45 E F0 .95(command continuously e)3.45 F -.15(xe)-.15 G
+.95(cutes the list).15 F F2(list-2)3.45 E F0 .95
+(as long as the last command in the list)3.45 F F2(list-1)144 136.8 Q F0
+.205(returns an e)2.705 F .205(xit status of zero.)-.15 F(The)5.205 E F1
+(until)2.705 E F0 .205(command is identical to the)2.705 F F1(while)
+2.705 E F0 .205(command, e)2.705 F(xcept)-.15 E .6(that the test is ne)
+144 148.8 R -.05(ga)-.15 G(ted:).05 E F2(list-2)3.19 E F0 .6(is e)3.12 F
+-.15(xe)-.15 G .599(cuted as long as the last command in).15 F F2
+(list-1)3.189 E F0 .599(returns a non-zero)3.099 F -.15(ex)144 160.8 S
+.204(it status.).15 F .204(The e)5.204 F .204(xit status of the)-.15 F
+F1(while)2.704 E F0(and)2.704 E F1(until)2.704 E F0 .205
+(commands is the e)2.704 F .205(xit status of the last command)-.15 F
+-.15(exe)144 172.8 S(cuted in).15 E F2(list-2)2.5 E F0 2.5(,o)C 2.5(rz)
+-2.5 G(ero if none w)-2.5 E(as e)-.1 E -.15(xe)-.15 G(cuted.).15 E F1
+(Copr)87 189.6 Q(ocesses)-.18 E F0(A)108 201.6 Q F2(copr)3.713 E(ocess)
+-.45 E F0 1.213(is a shell command preceded by the)3.713 F F1(copr)3.712
+E(oc)-.18 E F0(reserv)3.712 E 1.212(ed w)-.15 F 3.712(ord. A)-.1 F 1.212
+(coprocess is e)3.712 F -.15(xe)-.15 G 1.212(cuted asyn-).15 F .574(chr\
+onously in a subshell, as if the command had been terminated with the)
+108 213.6 R F1(&)3.075 E F0 .575(control operator)3.075 F 3.075(,w)-.4 G
+.575(ith a tw)-3.075 F(o-)-.1 E -.1(wa)108 225.6 S 2.5(yp).1 G
+(ipe established between the e)-2.5 E -.15(xe)-.15 G
+(cuting shell and the coprocess.).15 E(The format for a coprocess is:)
+108 242.4 Q F1(copr)144 259.2 Q(oc)-.18 E F0([)2.5 E F2 -.27(NA)C(ME).27
+E F0(])A F2(command)2.5 E F0([)2.5 E F2 -.37(re)C(dir).37 E(ections)-.37
+E F0(])A .709(This creates a coprocess named)108 276 R F2 -.27(NA)3.208
+G(ME).27 E F0 5.708(.I)C(f)-5.708 E F2 -.27(NA)3.208 G(ME).27 E F0 .708
+(is not supplied, the def)3.208 F .708(ault name is)-.1 F F1(COPR)3.208
+E(OC)-.3 E F0(.)A F2 -.27(NA)5.708 G(ME).27 E F0 .64
+(must not be supplied if)108 288 R F2(command)3.14 E F0 .64(is a)3.14 F
+F2 .64(simple command)3.14 F F0 .64(\(see abo)3.14 F -.15(ve)-.15 G .64
+(\); otherwise, it is interpreted as the \214rst).15 F -.1(wo)108 300 S
+.349(rd of the simple command.).1 F .348(When the coprocess is e)5.348 F
+-.15(xe)-.15 G .348(cuted, the shell creates an array v).15 F .348
+(ariable \(see)-.25 F F1(Ar)2.848 E(-)-.37 E(rays)108 312 Q F0(belo)
+3.095 E .595(w\) named)-.25 F F2 -.27(NA)3.095 G(ME).27 E F0 .595
+(in the conte)3.095 F .595(xt of the e)-.15 F -.15(xe)-.15 G .595
+(cuting shell.).15 F .596(The standard output of)5.595 F F2(command)
+3.296 E F0 .596(is con-)3.866 F .387
+(nected via a pipe to a \214le descriptor in the e)108 324 R -.15(xe)
+-.15 G .387(cuting shell, and that \214le descriptor is assigned to).15
+F F2 -.27(NA)2.886 G(ME).27 E F0([0].)A .57(The standard input of)108
+336 R F2(command)3.27 E F0 .571
+(is connected via a pipe to a \214le descriptor in the e)3.84 F -.15(xe)
+-.15 G .571(cuting shell, and that).15 F 1.221
+(\214le descriptor is assigned to)108 348 R F2 -.27(NA)3.721 G(ME).27 E
+F0 3.721([1]. This)B 1.221(pipe is established before an)3.721 F 3.72
+(yr)-.15 G 1.22(edirections speci\214ed by the)-3.72 F 1.58
+(command \(see)108 360 R/F3 9/Times-Bold@0 SF(REDIRECTION)4.08 E F0
+(belo)3.83 E 4.08(w\). The)-.25 F 1.581
+(\214le descriptors can be utilized as ar)4.08 F 1.581
+(guments to shell com-)-.18 F .149
+(mands and redirections using standard w)108 372 R .149(ord e)-.1 F
+2.649(xpansions. Other)-.15 F .148(than those created to e)2.649 F -.15
+(xe)-.15 G .148(cute command and).15 F 2.462
+(process substitutions, the \214le descriptors are not a)108 384 R -.25
+(va)-.2 G 2.463(ilable in subshells.).25 F 2.463
+(The process ID of the shell)7.463 F(spa)108 396 Q 1.115(wned to e)-.15
+F -.15(xe)-.15 G 1.115(cute the coprocess is a).15 F -.25(va)-.2 G 1.115
+(ilable as the v).25 F 1.115(alue of the v)-.25 F(ariable)-.25 E F2 -.27
+(NA)3.615 G(ME).27 E F0 3.615(_PID. The)B F1(wait)3.615 E F0 -.2(bu)
+3.615 G(iltin).2 E(command may be used to w)108 408 Q
+(ait for the coprocess to terminate.)-.1 E .336
+(Since the coprocess is created as an asynchronous command, the)108
+424.8 R F1(copr)2.836 E(oc)-.18 E F0 .336(command al)2.836 F -.1(wa)-.1
+G .336(ys returns success.).1 F
+(The return status of a coprocess is the e)108 436.8 Q(xit status of)
+-.15 E F2(command)2.5 E F0(.)A F1(Shell Function De\214nitions)87 453.6
+Q F0 2.698(As)108 465.6 S .198
+(hell function is an object that is called lik)-2.698 F 2.698(eas)-.1 G
+.198(imple command and e)-2.698 F -.15(xe)-.15 G .197
+(cutes a compound command with).15 F 2.5(an)108 477.6 S .5 -.25(ew s)
+-2.5 H(et of positional parameters.).25 E
+(Shell functions are declared as follo)5 E(ws:)-.25 E F2(fname)108 494.4
+Q F0(\(\))2.5 E F2(compound\255command)2.5 E F0([)2.5 E F2 -.37(re)C
+(dir).37 E(ection)-.37 E F0(])A F1(function)108 506.4 Q F2(fname)2.5 E
+F0([\(\)])2.5 E F2(compound\255command)2.5 E F0([)2.5 E F2 -.37(re)C
+(dir).37 E(ection)-.37 E F0(])A .216(This de\214nes a function named)144
+518.4 R F2(fname)2.716 E F0 5.217(.T)C .217(he reserv)-5.217 F .217
+(ed w)-.15 F(ord)-.1 E F1(function)2.717 E F0 .217(is optional.)2.717 F
+.217(If the)5.217 F F1(function)2.717 E F0(re-)2.717 E(serv)144 530.4 Q
+.68(ed w)-.15 F .68(ord is supplied, the parentheses are optional.)-.1 F
+(The)5.68 E F2(body)3.18 E F0 .68(of the function is the compound)3.18 F
+(command)144 542.4 Q F2(compound\255command)2.784 E F0(\(see)3.354 E F1
+.084(Compound Commands)2.584 F F0(abo)2.584 E -.15(ve)-.15 G 2.584
+(\). That).15 F .084(command is usually a)2.584 F F2(list)144 554.4 Q F0
+.044(of commands between { and }, b)2.544 F .044(ut may be an)-.2 F
+2.544(yc)-.15 G .044(ommand listed under)-2.544 F F1 .044
+(Compound Commands)2.544 F F0(abo)144 566.4 Q -.15(ve)-.15 G 2.901(,w)
+.15 G .401(ith one e)-2.901 F .401(xception: If the)-.15 F F1(function)
+2.901 E F0(reserv)2.901 E .401(ed w)-.15 F .401(ord is used, b)-.1 F
+.402(ut the parentheses are not sup-)-.2 F 1.046
+(plied, the braces are required.)144 578.4 R F2(compound\255command)
+6.046 E F0 1.046(is e)3.546 F -.15(xe)-.15 G 1.046(cuted whene).15 F
+-.15(ve)-.25 G(r).15 E F2(fname)3.546 E F0 1.045(is speci\214ed as)3.546
+F .365(the name of a simple command.)144 590.4 R .365(When in)5.365 F F2
+.366(posix mode)2.865 F F0(,)A F2(fname)2.866 E F0 .366(must be a v)
+2.866 F .366(alid shell)-.25 F F2(name)2.866 E F0 .366(and may)2.866 F
+.894(not be the name of one of the POSIX)144 602.4 R F2 .893(special b)
+3.393 F(uiltins)-.2 E F0 5.893(.I)C 3.393(nd)-5.893 G(ef)-3.393 E .893
+(ault mode, a function name can be)-.1 F(an)144 614.4 Q 3.649(yu)-.15 G
+1.149(nquoted shell w)-3.649 F 1.15(ord that does not contain)-.1 F F1
+($)3.65 E F0 6.15(.A)C 1.45 -.15(ny r)-6.15 H 1.15(edirections \(see).15
+F F3(REDIRECTION)3.65 E F0(belo)3.4 E(w\))-.25 E .417(speci\214ed when \
+a function is de\214ned are performed when the function is e)144 626.4 R
+-.15(xe)-.15 G 2.916(cuted. The).15 F -.15(ex)2.916 G .416(it status).15
+F .733(of a function de\214nition is zero unless a syntax error occurs \
+or a readonly function with the same)144 638.4 R .178(name already e)144
+650.4 R 2.678(xists. When)-.15 F -.15(exe)2.678 G .178(cuted, the e).15
+F .178(xit status of a function is the e)-.15 F .177
+(xit status of the last com-)-.15 F(mand e)144 662.4 Q -.15(xe)-.15 G
+(cuted in the body).15 E 5(.\()-.65 G(See)-5 E F3(FUNCTIONS)2.5 E F0
+(belo)2.25 E -.65(w.)-.25 G(\)).65 E/F4 10.95/Times-Bold@0 SF(COMMENTS)
+72 679.2 Q F0 .982(In a non-interacti)108 691.2 R 1.282 -.15(ve s)-.25 H
+.982(hell, or an interacti).15 F 1.282 -.15(ve s)-.25 H .982
+(hell in which the).15 F F1(interacti)3.482 E -.1(ve)-.1 G(_comments).1
+E F0 .982(option to the)3.482 F F1(shopt)3.482 E F0 -.2(bu)108 703.2 S
+.952(iltin is enabled \(see).2 F F3 .952(SHELL B)3.452 F(UIL)-.09 E .952
+(TIN COMMANDS)-.828 F F0(belo)3.202 E .952(w\), a w)-.25 F .952(ord be)
+-.1 F .952(ginning with)-.15 F F1(#)3.451 E F0 .951(causes that w)3.451
+F(ord)-.1 E .604
+(and all remaining characters on that line to be ignored.)108 715.2 R
+.605(An interacti)5.605 F .905 -.15(ve s)-.25 H .605(hell without the)
+.15 F F1(interacti)3.105 E -.1(ve)-.1 G(_com-).1 E(ments)108 727.2 Q F0
+1.337(option enabled does not allo)3.837 F 3.837(wc)-.25 G 3.836
+(omments. The)-3.837 F F1(interacti)3.836 E -.1(ve)-.1 G(_comments).1 E
+F0 1.336(option is on by def)3.836 F 1.336(ault in)-.1 F(GNU Bash 5.1)72
+768 Q(2020 October 29)141.235 E(7)195.395 E 0 Cg EP
+%%Page: 8 8
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E(interacti)108 84 Q
+.3 -.15(ve s)-.25 H(hells.).15 E/F1 10.95/Times-Bold@0 SF -.11(QU)72
+100.8 S -.438(OT).11 G(ING).438 E/F2 10/Times-Italic@0 SF(Quoting)108
+112.8 Q F0 .477(is used to remo)2.977 F .777 -.15(ve t)-.15 H .477
+(he special meaning of certain characters or w).15 F .477
+(ords to the shell.)-.1 F .478(Quoting can be)5.478 F .185
+(used to disable special treatment for special characters, to pre)108
+124.8 R -.15(ve)-.25 G .185(nt reserv).15 F .184(ed w)-.15 F .184
+(ords from being recognized as)-.1 F(such, and to pre)108 136.8 Q -.15
+(ve)-.25 G(nt parameter e).15 E(xpansion.)-.15 E .288(Each of the)108
+153.6 R F2(metac)2.788 E(har)-.15 E(acter)-.15 E(s)-.1 E F0 .288
+(listed abo)2.788 F .588 -.15(ve u)-.15 H(nder).15 E/F3 9/Times-Bold@0
+SF(DEFINITIONS)2.788 E F0 .288
+(has special meaning to the shell and must be)2.538 F
+(quoted if it is to represent itself.)108 165.6 Q 1.345
+(When the command history e)108 182.4 R 1.344(xpansion f)-.15 F 1.344
+(acilities are being used \(see)-.1 F F3(HIST)3.844 E(OR)-.162 E 3.594
+(YE)-.315 G(XP)-3.594 E(ANSION)-.666 E F0(belo)3.594 E 1.344(w\), the)
+-.25 F F2(history e)108 194.4 Q(xpansion)-.2 E F0(character)2.5 E 2.5
+(,u)-.4 G(sually)-2.5 E/F4 10/Times-Bold@0 SF(!)2.5 E F0 2.5(,m)C
+(ust be quoted to pre)-2.5 E -.15(ve)-.25 G(nt history e).15 E
+(xpansion.)-.15 E(There are three quoting mechanisms: the)108 211.2 Q F2
+(escape c)2.69 E(har)-.15 E(acter)-.15 E F0 2.5(,s).73 G
+(ingle quotes, and double quotes.)-2.5 E 2.962(An)108 228 S .463
+(on-quoted backslash \()-2.962 F F4(\\)A F0 2.963(\)i)C 2.963(st)-2.963
+G(he)-2.963 E F2 .463(escape c)3.153 F(har)-.15 E(acter)-.15 E F0 5.463
+(.I).73 G 2.963(tp)-5.463 G(reserv)-2.963 E .463(es the literal v)-.15 F
+.463(alue of the ne)-.25 F .463(xt character that)-.15 F(follo)108 240 Q
+1.554(ws, with the e)-.25 F 1.553(xception of <ne)-.15 F 4.053
+(wline>. If)-.25 F(a)4.053 E F4(\\)4.053 E F0(<ne)A 1.553
+(wline> pair appears, and the backslash is not itself)-.25 F .347
+(quoted, the)108 252 R F4(\\)2.847 E F0(<ne)A .347
+(wline> is treated as a line continuation \(that is, it is remo)-.25 F
+-.15(ve)-.15 G 2.848(df).15 G .348(rom the input stream and ef-)-2.848 F
+(fecti)108 264 Q -.15(ve)-.25 G(ly ignored\).).15 E .295
+(Enclosing characters in single quotes preserv)108 280.8 R .295
+(es the literal v)-.15 F .295(alue of each character within the quotes.)
+-.25 F 2.795(As)5.295 G(in-)-2.795 E
+(gle quote may not occur between single quotes, e)108 292.8 Q -.15(ve)
+-.25 G 2.5(nw).15 G(hen preceded by a backslash.)-2.5 E .033
+(Enclosing characters in double quotes preserv)108 309.6 R .034
+(es the literal v)-.15 F .034
+(alue of all characters within the quotes, with the)-.25 F -.15(ex)108
+321.6 S .108(ception of).15 F F4($)2.608 E F0(,)A F4<92>2.608 E F0(,)A
+F4(\\)2.608 E F0 2.608(,a)C .107(nd, when history e)-2.608 F .107
+(xpansion is enabled,)-.15 F F4(!)2.607 E F0 5.107(.W)C .107
+(hen the shell is in)-5.107 F F2 .107(posix mode)2.607 F F0 2.607(,t)C
+(he)-2.607 E F4(!)2.607 E F0 .107(has no)2.607 F .46
+(special meaning within double quotes, e)108 333.6 R -.15(ve)-.25 G 2.96
+(nw).15 G .46(hen history e)-2.96 F .46(xpansion is enabled.)-.15 F .46
+(The characters)5.46 F F4($)2.96 E F0(and)2.96 E F4<92>2.96 E F0(re-)
+2.96 E .563(tain their special meaning within double quotes.)108 345.6 R
+.562(The backslash retains its special meaning only when fol-)5.563 F
+(lo)108 357.6 Q .601(wed by one of the follo)-.25 F .602
+(wing characters:)-.25 F F4($)3.102 E F0(,)A F4<92>3.102 E F0(,)A F4(")
+3.935 E F0(,).833 E F4(\\)3.102 E F0 3.102(,o)C(r)-3.102 E F4(<newline>)
+3.102 E F0 5.602(.A)C .602(double quote may be quoted within)-2.5 F .131
+(double quotes by preceding it with a backslash.)108 369.6 R .131
+(If enabled, history e)5.131 F .13(xpansion will be performed unless an)
+-.15 F F4(!)2.63 E F0
+(appearing in double quotes is escaped using a backslash.)108 381.6 Q
+(The backslash preceding the)5 E F4(!)2.5 E F0(is not remo)5 E -.15(ve)
+-.15 G(d.).15 E(The special parameters)108 398.4 Q F4(*)2.5 E F0(and)2.5
+E F4(@)2.5 E F0(ha)2.5 E .3 -.15(ve s)-.2 H
+(pecial meaning when in double quotes \(see).15 E F3 -.666(PA)2.5 G
+(RAMETERS).666 E F0(belo)2.25 E(w\).)-.25 E -.8(Wo)108 415.2 S .211
+(rds of the form).8 F F4($)2.711 E F0<08>A F2(string)A F0 2.711<0861>C
+.211(re treated specially)-2.711 F 5.211(.T)-.65 G .211(he w)-5.211 F
+.211(ord e)-.1 F .212(xpands to)-.15 F F2(string)2.712 E F0 2.712(,w)C
+.212(ith backslash-escaped char)-2.712 F(-)-.2 E .605
+(acters replaced as speci\214ed by the ANSI C standard.)108 427.2 R .604
+(Backslash escape sequences, if present, are decoded)5.605 F(as follo)
+108 439.2 Q(ws:)-.25 E F4(\\a)144 451.2 Q F0(alert \(bell\))180 451.2 Q
+F4(\\b)144 463.2 Q F0(backspace)180 463.2 Q F4(\\e)144 475.2 Q(\\E)144
+487.2 Q F0(an escape character)180 487.2 Q F4(\\f)144 499.2 Q F0
+(form feed)180 499.2 Q F4(\\n)144 511.2 Q F0(ne)180 511.2 Q 2.5(wl)-.25
+G(ine)-2.5 E F4(\\r)144 523.2 Q F0(carriage return)180 523.2 Q F4(\\t)
+144 535.2 Q F0(horizontal tab)180 535.2 Q F4(\\v)144 547.2 Q F0 -.15(ve)
+180 547.2 S(rtical tab).15 E F4(\\\\)144 559.2 Q F0(backslash)180 559.2
+Q F4<5c08>144 571.2 Q F0(single quote)180 571.2 Q F4(\\")144 583.2 Q F0
+(double quote)180 583.2 Q F4(\\?)144 595.2 Q F0(question mark)180 595.2
+Q F4(\\)144 607.2 Q F2(nnn)A F0(the eight-bit character whose v)180
+607.2 Q(alue is the octal v)-.25 E(alue)-.25 E F2(nnn)2.5 E F0
+(\(one to three octal digits\))2.5 E F4(\\x)144 619.2 Q F2(HH)A F0
+(the eight-bit character whose v)180 619.2 Q(alue is the he)-.25 E
+(xadecimal v)-.15 E(alue)-.25 E F2(HH)2.5 E F0(\(one or tw)2.5 E 2.5(oh)
+-.1 G .3 -.15(ex d)-2.5 H(igits\)).15 E F4(\\u)144 631.2 Q F2(HHHH)A F0
+1.506(the Unicode \(ISO/IEC 10646\) character whose v)180 643.2 R 1.507
+(alue is the he)-.25 F 1.507(xadecimal v)-.15 F(alue)-.25 E F2(HHHH)
+4.007 E F0(\(one to four he)180 655.2 Q 2.5(xd)-.15 G(igits\))-2.5 E F4
+(\\U)144 667.2 Q F2(HHHHHHHH)A F0 .548
+(the Unicode \(ISO/IEC 10646\) character whose v)180 679.2 R .547
+(alue is the he)-.25 F .547(xadecimal v)-.15 F(alue)-.25 E F2(HHHHH-)
+3.047 E(HHH)180 691.2 Q F0(\(one to eight he)2.5 E 2.5(xd)-.15 G
+(igits\))-2.5 E F4(\\c)144 703.2 Q F2(x)A F0 2.5(ac)180 703.2 S(ontrol-)
+-2.5 E F2(x)A F0(character)2.5 E(The e)108 720 Q(xpanded result is sing\
+le-quoted, as if the dollar sign had not been present.)-.15 E
+(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(8)195.395 E 0 Cg EP
+%%Page: 9 9
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E 2.64(Ad)108 84 S
+.14(ouble-quoted string preceded by a dollar sign \()-2.64 F/F1 10
+/Times-Bold@0 SF($)A F0(")A/F2 10/Times-Italic@0 SF(string)A F0 .14
+("\) will cause the string to be translated according)B .31
+(to the current locale.)108 96 R(The)5.31 E F2 -.1(ge)2.809 G(tte).1 E
+(xt)-.2 E F0 .309(infrastructure performs the message catalog lookup an\
+d translation, using)2.809 F(the)108 108 Q F1(LC_MESSA)2.625 E(GES)-.55
+E F0(and)2.625 E F1(TEXTDOMAIN)2.625 E F0 .125(shell v)2.625 F 2.625
+(ariables. If)-.25 F .126(the current locale is)2.626 F F1(C)2.626 E F0
+(or)2.626 E F1(POSIX)2.626 E F0 2.626(,o)C 2.626(ri)-2.626 G 2.626(ft)
+-2.626 G(here)-2.626 E .362(are no translations a)108 120 R -.25(va)-.2
+G .362(ilable, the dollar sign is ignored.).25 F .362
+(If the string is translated and replaced, the replace-)5.362 F
+(ment is double-quoted.)108 132 Q/F3 10.95/Times-Bold@0 SF -.81(PA)72
+148.8 S(RAMETERS).81 E F0(A)108 160.8 Q F2(par)4.574 E(ameter)-.15 E F0
+.824(is an entity that stores v)4.054 F 3.324(alues. It)-.25 F .824
+(can be a)3.324 F F2(name)3.685 E F0 3.325(,an).18 G(umber)-3.325 E
+3.325(,o)-.4 G 3.325(ro)-3.325 G .825(ne of the special characters)
+-3.325 F .802(listed belo)108 172.8 R 3.302(wu)-.25 G(nder)-3.302 E F1
+.802(Special P)3.302 F(arameters)-.1 E F0 5.802(.A)C F2(variable)-2.21 E
+F0 .802(is a parameter denoted by a)3.482 F F2(name)3.662 E F0 5.801(.A)
+.18 G -.25(va)-2.5 G .801(riable has a).25 F F2(value)108 184.8 Q F0
+.368(and zero or more)2.868 F F2(attrib)2.868 E(utes)-.2 E F0 5.369(.A)C
+(ttrib)-5.369 E .369(utes are assigned using the)-.2 F F1(declar)2.869 E
+(e)-.18 E F0 -.2(bu)2.869 G .369(iltin command \(see).2 F F1(declar)
+2.869 E(e)-.18 E F0(belo)108 196.8 Q 2.5(wi)-.25 G(n)-2.5 E/F4 9
+/Times-Bold@0 SF(SHELL B)2.5 E(UIL)-.09 E(TIN COMMANDS)-.828 E/F5 9
+/Times-Roman@0 SF(\).)A F0 2.755(Ap)108 213.6 S .255
+(arameter is set if it has been assigned a v)-2.755 F 2.754(alue. The)
+-.25 F .254(null string is a v)2.754 F .254(alid v)-.25 F 2.754
+(alue. Once)-.25 F 2.754(av)2.754 G .254(ariable is set, it)-3.004 F
+(may be unset only by using the)108 225.6 Q F1(unset)2.5 E F0 -.2(bu)2.5
+G(iltin command \(see).2 E F4(SHELL B)2.5 E(UIL)-.09 E(TIN COMMANDS)
+-.828 E F0(belo)2.25 E(w\).)-.25 E(A)108 242.4 Q F2(variable)2.79 E F0
+(may be assigned to by a statement of the form)2.68 E F2(name)144 259.2
+Q F0(=[)A F2(value)A F0(])A(If)108 276 Q F2(value)3.022 E F0 .232
+(is not gi)2.912 F -.15(ve)-.25 G .232(n, the v).15 F .232
+(ariable is assigned the null string.)-.25 F(All)5.233 E F2(values)3.023
+E F0(under)3.003 E .233(go tilde e)-.18 F .233(xpansion, parameter)-.15
+F .515(and v)108 288 R .515(ariable e)-.25 F .515
+(xpansion, command substitution, arithmetic e)-.15 F .515
+(xpansion, and quote remo)-.15 F -.25(va)-.15 G 3.015(l\().25 G(see)
+-3.015 E F4(EXP)3.015 E(ANSION)-.666 E F0(belo)108 300 Q 2.698(w\). If)
+-.25 F .198(the v)2.698 F .198(ariable has its)-.25 F F1(integer)2.698 E
+F0(attrib)2.698 E .198(ute set, then)-.2 F F2(value)2.988 E F0 .198
+(is e)2.878 F -.25(va)-.25 G .199(luated as an arithmetic e).25 F .199
+(xpression e)-.15 F -.15(ve)-.25 G(n).15 E .902(if the $\(\(...\)\) e)
+108 312 R .902(xpansion is not used \(see)-.15 F F1 .901
+(Arithmetic Expansion)3.401 F F0(belo)3.401 E 3.401(w\). W)-.25 F .901
+(ord splitting is not performed,)-.8 F 1.178(with the e)108 324 R 1.178
+(xception of)-.15 F F1("$@")3.678 E F0 1.178(as e)3.678 F 1.179
+(xplained belo)-.15 F 3.679(wu)-.25 G(nder)-3.679 E F1 1.179(Special P)
+3.679 F(arameters)-.1 E F0 6.179(.P)C 1.179(athname e)-6.329 F 1.179
+(xpansion is not)-.15 F 3.649(performed. Assignment)108 336 R 1.149
+(statements may also appear as ar)3.649 F 1.148(guments to the)-.18 F F1
+(alias)3.648 E F0(,)A F1(declar)3.648 E(e)-.18 E F0(,)A F1(typeset)3.648
+E F0(,)A F1(export)3.648 E F0(,)A F1 -.18(re)108 348 S(adonly).18 E F0
+3.288(,a)C(nd)-3.288 E F1(local)3.288 E F0 -.2(bu)3.288 G .788
+(iltin commands \().2 F F2(declar)A(ation)-.15 E F0 3.288
+(commands\). When)3.288 F(in)3.289 E F2 .789(posix mode)3.289 F F0 3.289
+(,t)C .789(hese b)-3.289 F .789(uiltins may)-.2 F 1.496
+(appear in a command after one or more instances of the)108 360 R F1
+(command)3.996 E F0 -.2(bu)3.996 G 1.496
+(iltin and retain these assignment).2 F(statement properties.)108 372 Q
+.376(In the conte)108 388.8 R .376
+(xt where an assignment statement is assigning a v)-.15 F .376
+(alue to a shell v)-.25 F .377(ariable or array inde)-.25 F .377
+(x, the +=)-.15 F 1.631
+(operator can be used to append to or add to the v)108 400.8 R(ariable')
+-.25 E 4.13(sp)-.55 G(re)-4.13 E 1.63(vious v)-.25 F 4.13(alue. This)
+-.25 F 1.63(includes ar)4.13 F 1.63(guments to)-.18 F -.2(bu)108 412.8 S
+.163(iltin commands such as).2 F F1(declar)2.664 E(e)-.18 E F0 .164
+(that accept assignment statements \()2.664 F F2(declar)A(ation)-.15 E
+F0 2.664(commands\). When)2.664 F .164(+= is)2.664 F .252
+(applied to a v)108 424.8 R .252(ariable for which the)-.25 F F2(inte)
+2.752 E -.1(ge)-.4 G(r).1 E F0(attrib)2.752 E .252(ute has been set,)-.2
+F F2(value)2.752 E F0 .251(is e)2.751 F -.25(va)-.25 G .251
+(luated as an arithmetic e).25 F(xpres-)-.15 E .05
+(sion and added to the v)108 436.8 R(ariable')-.25 E 2.55(sc)-.55 G .05
+(urrent v)-2.55 F .05(alue, which is also e)-.25 F -.25(va)-.25 G 2.55
+(luated. When).25 F .05(+= is applied to an array v)2.55 F(ari-)-.25 E
+.459(able using compound assignment \(see)108 448.8 R F1(Arrays)2.959 E
+F0(belo)2.959 E .459(w\), the v)-.25 F(ariable')-.25 E 2.959(sv)-.55 G
+.459(alue is not unset \(as it is when using)-3.209 F .265(=\), and ne)
+108 460.8 R 2.765(wv)-.25 G .265(alues are appended to the array be)
+-3.015 F .265(ginning at one greater than the array')-.15 F 2.765(sm)
+-.55 G .265(aximum inde)-2.765 F 2.765(x\()-.15 G(for)-2.765 E(inde)108
+472.8 Q -.15(xe)-.15 G 3.402(da).15 G .902
+(rrays\) or added as additional k)-3.402 F -.15(ey)-.1 G<ad76>.15 E .901
+(alue pairs in an associati)-.25 F 1.201 -.15(ve a)-.25 H(rray).15 E
+5.901(.W)-.65 G .901(hen applied to a string-)-5.901 F -.25(va)108 484.8
+S(lued v).25 E(ariable,)-.25 E F2(value)2.5 E F0(is e)2.5 E
+(xpanded and appended to the v)-.15 E(ariable')-.25 E 2.5(sv)-.55 G
+(alue.)-2.75 E 3.382(Av)108 501.6 S .882(ariable can be assigned the)
+-3.632 F F2(namer)3.382 E(ef)-.37 E F0(attrib)3.382 E .882
+(ute using the)-.2 F F1<ad6e>3.382 E F0 .882(option to the)3.382 F F1
+(declar)3.382 E(e)-.18 E F0(or)3.383 E F1(local)3.383 E F0 -.2(bu)3.383
+G .883(iltin com-).2 F .316(mands \(see the descriptions of)108 513.6 R
+F1(declar)2.816 E(e)-.18 E F0(and)2.816 E F1(local)2.816 E F0(belo)2.816
+E .316(w\) to create a)-.25 F F2(namer)2.815 E(ef)-.37 E F0 2.815(,o)C
+2.815(rar)-2.815 G .315(eference to another v)-2.815 F(ari-)-.25 E 2.918
+(able. This)108 525.6 R(allo)2.918 E .418(ws v)-.25 F .418
+(ariables to be manipulated indirectly)-.25 F 5.419(.W)-.65 G(hene)
+-5.419 E -.15(ve)-.25 G 2.919(rt).15 G .419(he nameref v)-2.919 F .419
+(ariable is referenced, as-)-.25 F .133
+(signed to, unset, or has its attrib)108 537.6 R .132
+(utes modi\214ed \(other than using or changing the)-.2 F F2(namer)2.632
+E(ef)-.37 E F0(attrib)2.632 E .132(ute itself\), the)-.2 F 1.356
+(operation is actually performed on the v)108 549.6 R 1.357
+(ariable speci\214ed by the nameref v)-.25 F(ariable')-.25 E 3.857(sv)
+-.55 G 3.857(alue. A)-4.107 F 1.357(nameref is)3.857 F .972
+(commonly used within shell functions to refer to a v)108 561.6 R .971
+(ariable whose name is passed as an ar)-.25 F .971(gument to the)-.18 F
+2.5(function. F)108 573.6 R(or instance, if a v)-.15 E
+(ariable name is passed to a shell function as its \214rst ar)-.25 E
+(gument, running)-.18 E/F6 10/Courier@0 SF(declare -n ref=$1)144 591.6 Q
+F0 .302(inside the function creates a nameref v)108 609.6 R(ariable)-.25
+E F1 -.18(re)2.803 G(f).18 E F0 .303(whose v)2.803 F .303(alue is the v)
+-.25 F .303(ariable name passed as the \214rst ar)-.25 F(gu-)-.18 E
+3.592(ment. References)108 621.6 R 1.092(and assignments to)3.592 F F1
+-.18(re)3.592 G(f).18 E F0 3.592(,a)C 1.092(nd changes to its attrib)
+-3.592 F 1.092(utes, are treated as references, assign-)-.2 F .143
+(ments, and attrib)108 633.6 R .144(ute modi\214cations to the v)-.2 F
+.144(ariable whose name w)-.25 F .144(as passed as)-.1 F F1($1)2.644 E
+F0 5.144(.I)C 2.644(ft)-5.144 G .144(he control v)-2.644 F .144
+(ariable in a)-.25 F F1 -.25(fo)108 645.6 S(r).25 E F0 .868
+(loop has the nameref attrib)3.368 F .868(ute, the list of w)-.2 F .867
+(ords can be a list of shell v)-.1 F .867
+(ariables, and a name reference)-.25 F .509
+(will be established for each w)108 657.6 R .509
+(ord in the list, in turn, when the loop is e)-.1 F -.15(xe)-.15 G 3.009
+(cuted. Array).15 F -.25(va)3.009 G .509(riables cannot be).25 F(gi)108
+669.6 Q -.15(ve)-.25 G 3.032(nt).15 G(he)-3.032 E F1(namer)3.032 E(ef)
+-.18 E F0(attrib)3.032 E 3.032(ute. Ho)-.2 F(we)-.25 E -.15(ve)-.25 G
+1.332 -.4(r, n).15 H .532(ameref v).4 F .531
+(ariables can reference array v)-.25 F .531(ariables and subscripted ar)
+-.25 F(-)-.2 E .533(ray v)108 681.6 R 3.033(ariables. Namerefs)-.25 F
+.533(can be unset using the)3.033 F F1<ad6e>3.033 E F0 .533
+(option to the)3.033 F F1(unset)3.033 E F0 -.2(bu)3.034 G 3.034
+(iltin. Otherwise,).2 F(if)3.034 E F1(unset)3.034 E F0 .534(is e)3.034 F
+-.15(xe)-.15 G(-).15 E .443(cuted with the name of a nameref v)108 693.6
+R .442(ariable as an ar)-.25 F .442(gument, the v)-.18 F .442
+(ariable referenced by the nameref v)-.25 F(ariable)-.25 E
+(will be unset.)108 705.6 Q(GNU Bash 5.1)72 768 Q(2020 October 29)
+141.235 E(9)195.395 E 0 Cg EP
+%%Page: 10 10
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF -.2(Po)87 84 S(sitional P).2 E(arameters)-.1 E F0(A)108 96 Q/F2 10
+/Times-Italic@0 SF .705(positional par)4.455 F(ameter)-.15 E F0 .706(is\
+ a parameter denoted by one or more digits, other than the single digit\
+ 0.)3.935 F(Posi-)5.706 E .445
+(tional parameters are assigned from the shell')108 108 R 2.944(sa)-.55
+G -.18(rg)-2.944 G .444(uments when it is in).18 F -.2(vo)-.4 G -.1(ke)
+.2 G .444(d, and may be reassigned using).1 F(the)108 120 Q F1(set)3.333
+E F0 -.2(bu)3.333 G .833(iltin command.).2 F .834(Positional parameters\
+ may not be assigned to with assignment statements.)5.833 F(The)5.834 E
+(positional parameters are temporarily replaced when a shell function i\
+s e)108 132 Q -.15(xe)-.15 G(cuted \(see).15 E/F3 9/Times-Bold@0 SF
+(FUNCTIONS)2.5 E F0(belo)2.25 E(w\).)-.25 E 1.404(When a positional par\
+ameter consisting of more than a single digit is e)108 148.8 R 1.403
+(xpanded, it must be enclosed in)-.15 F(braces \(see)108 160.8 Q F3(EXP)
+2.5 E(ANSION)-.666 E F0(belo)2.25 E(w\).)-.25 E F1(Special P)87 177.6 Q
+(arameters)-.1 E F0 1.674(The shell treats se)108 189.6 R -.15(ve)-.25 G
+1.674(ral parameters specially).15 F 6.675(.T)-.65 G 1.675
+(hese parameters may only be referenced; assignment to)-6.675 F
+(them is not allo)108 201.6 Q(wed.)-.25 E F1(*)108 213.6 Q F0 .224
+(Expands to the positional parameters, starting from one.)144 213.6 R
+.223(When the e)5.224 F .223(xpansion is not within double)-.15 F .662
+(quotes, each positional parameter e)144 225.6 R .662
+(xpands to a separate w)-.15 F 3.162(ord. In)-.1 F(conte)3.162 E .662
+(xts where it is performed,)-.15 F 1.082(those w)144 237.6 R 1.082
+(ords are subject to further w)-.1 F 1.081(ord splitting and pathname e)
+-.1 F 3.581(xpansion. When)-.15 F 1.081(the e)3.581 F(xpansion)-.15 E
+.914(occurs within double quotes, it e)144 249.6 R .914
+(xpands to a single w)-.15 F .915(ord with the v)-.1 F .915
+(alue of each parameter sepa-)-.25 F .891
+(rated by the \214rst character of the)144 261.6 R F3(IFS)3.39 E F0 .89
+(special v)3.14 F 3.39(ariable. That)-.25 F .89(is, ")3.39 F F1($*)A F0
+3.39("i)C 3.39(se)-3.39 G(qui)-3.39 E -.25(va)-.25 G .89(lent to ").25 F
+F1($1)A F2(c)A F1($2)A F2(c)A F1(...)A F0(",)A(where)144 273.6 Q F2(c)
+3.532 E F0 .832(is the \214rst character of the v)3.642 F .832
+(alue of the)-.25 F F3(IFS)3.332 E F0 -.25(va)3.082 G 3.332(riable. If)
+.25 F F3(IFS)3.332 E F0 .833(is unset, the parameters are)3.082 F
+(separated by spaces.)144 285.6 Q(If)5 E F3(IFS)2.5 E F0
+(is null, the parameters are joined without interv)2.25 E
+(ening separators.)-.15 E F1(@)108 297.6 Q F0 .722
+(Expands to the positional parameters, starting from one.)144 297.6 R
+.722(In conte)5.722 F .722(xts where w)-.15 F .722(ord splitting is per)
+-.1 F(-)-.2 E 1.165(formed, this e)144 309.6 R 1.165
+(xpands each positional parameter to a separate w)-.15 F 1.165
+(ord; if not within double quotes,)-.1 F .655(these w)144 321.6 R .655
+(ords are subject to w)-.1 F .655(ord splitting.)-.1 F .655(In conte)
+5.655 F .655(xts where w)-.15 F .654
+(ord splitting is not performed, this)-.1 F -.15(ex)144 333.6 S .748
+(pands to a single w).15 F .748
+(ord with each positional parameter separated by a space.)-.1 F .748
+(When the e)5.748 F(xpan-)-.15 E 1.091
+(sion occurs within double quotes, each parameter e)144 345.6 R 1.091
+(xpands to a separate w)-.15 F 3.59(ord. That)-.1 F 1.09(is, ")3.59 F F1
+($@)A F0 3.59("i)C(s)-3.59 E(equi)144 357.6 Q -.25(va)-.25 G .412
+(lent to ").25 F F1($1)A F0 2.912("")C F1($2)-2.912 E F0 2.912(".)C
+2.912(.. If)-2.912 F .413(the double-quoted e)2.913 F .413
+(xpansion occurs within a w)-.15 F .413(ord, the e)-.1 F .413
+(xpansion of)-.15 F .38(the \214rst parameter is joined with the be)144
+369.6 R .379(ginning part of the original w)-.15 F .379(ord, and the e)
+-.1 F .379(xpansion of the)-.15 F .771
+(last parameter is joined with the last part of the original w)144 381.6
+R 3.271(ord. When)-.1 F .772(there are no positional pa-)3.271 F
+(rameters, ")144 393.6 Q F1($@)A F0 2.5("a)C(nd)-2.5 E F1($@)2.5 E F0
+-.15(ex)2.5 G(pand to nothing \(i.e., the).15 E 2.5(ya)-.15 G(re remo)
+-2.5 E -.15(ve)-.15 G(d\).).15 E F1(#)108 405.6 Q F0
+(Expands to the number of positional parameters in decimal.)144 405.6 Q
+F1(?)108 417.6 Q F0(Expands to the e)144 417.6 Q
+(xit status of the most recently e)-.15 E -.15(xe)-.15 G(cuted fore).15
+E(ground pipeline.)-.15 E F1<ad>108 429.6 Q F0 .882
+(Expands to the current option \215ags as speci\214ed upon in)144 429.6
+R -.2(vo)-.4 G .881(cation, by the).2 F F1(set)3.381 E F0 -.2(bu)3.381 G
+.881(iltin command, or).2 F(those set by the shell itself \(such as the)
+144 441.6 Q F1<ad69>2.5 E F0(option\).)2.5 E F1($)108 453.6 Q F0 .214
+(Expands to the process ID of the shell.)144 453.6 R .214
+(In a \(\) subshell, it e)5.214 F .214
+(xpands to the process ID of the current)-.15 F
+(shell, not the subshell.)144 465.6 Q F1(!)108 477.6 Q F0 .499(Expands \
+to the process ID of the job most recently placed into the background, \
+whether e)144 477.6 R -.15(xe)-.15 G(cuted).15 E
+(as an asynchronous command or using the)144 489.6 Q F1(bg)2.5 E F0 -.2
+(bu)2.5 G(iltin \(see).2 E F3(JOB CONTR)2.5 E(OL)-.27 E F0(belo)2.25 E
+(w\).)-.25 E F1(0)108 501.6 Q F0 .886
+(Expands to the name of the shell or shell script.)144 501.6 R .886
+(This is set at shell initialization.)5.886 F(If)5.887 E F1(bash)3.387 E
+F0 .887(is in-)3.387 F -.2(vo)144 513.6 S -.1(ke).2 G 2.668(dw).1 G .168
+(ith a \214le of commands,)-2.668 F F1($0)2.668 E F0 .167
+(is set to the name of that \214le.)2.667 F(If)5.167 E F1(bash)2.667 E
+F0 .167(is started with the)2.667 F F1<ad63>2.667 E F0(op-)2.667 E .895
+(tion, then)144 525.6 R F1($0)3.395 E F0 .895(is set to the \214rst ar)
+3.395 F .895(gument after the string to be e)-.18 F -.15(xe)-.15 G .896
+(cuted, if one is present.).15 F(Other)5.896 E(-)-.2 E
+(wise, it is set to the \214lename used to in)144 537.6 Q -.2(vo)-.4 G
+-.1(ke).2 G F1(bash)2.6 E F0 2.5(,a)C 2.5(sg)-2.5 G -2.15 -.25(iv e)-2.5
+H 2.5(nb).25 G 2.5(ya)-2.5 G -.18(rg)-2.5 G(ument zero.).18 E F1
+(Shell V)87 554.4 Q(ariables)-.92 E F0(The follo)108 566.4 Q(wing v)-.25
+E(ariables are set by the shell:)-.25 E F1(_)108 583.2 Q F0 1.526
+(At shell startup, set to the pathname used to in)144 583.2 R -.2(vo)-.4
+G 1.725 -.1(ke t).2 H 1.525(he shell or shell script being e).1 F -.15
+(xe)-.15 G 1.525(cuted as).15 F .173(passed in the en)144 595.2 R .173
+(vironment or ar)-.4 F .173(gument list.)-.18 F(Subsequently)5.173 E
+2.673(,e)-.65 G .173(xpands to the last ar)-2.823 F .174
+(gument to the pre-)-.18 F .337(vious simple command e)144 607.2 R -.15
+(xe)-.15 G .337(cuted in the fore).15 F .336(ground, after e)-.15 F
+2.836(xpansion. Also)-.15 F .336(set to the full pathname)2.836 F .365
+(used to in)144 619.2 R -.2(vo)-.4 G .565 -.1(ke e).2 H .365
+(ach command e).1 F -.15(xe)-.15 G .366(cuted and placed in the en).15 F
+.366(vironment e)-.4 F .366(xported to that command.)-.15 F(When checki\
+ng mail, this parameter holds the name of the mail \214le currently bei\
+ng check)144 631.2 Q(ed.)-.1 E F1 -.3(BA)108 643.2 S(SH).3 E F0
+(Expands to the full \214lename used to in)144 643.2 Q -.2(vo)-.4 G .2
+-.1(ke t).2 H(his instance of).1 E F1(bash)2.5 E F0(.)A F1 -.3(BA)108
+655.2 S(SHOPTS).3 E F0 2.549(Ac)144 667.2 S .049
+(olon-separated list of enabled shell options.)-2.549 F .049(Each w)
+5.049 F .049(ord in the list is a v)-.1 F .049(alid ar)-.25 F .049
+(gument for the)-.18 F F1<ad73>2.548 E F0 .115(option to the)144 679.2 R
+F1(shopt)2.616 E F0 -.2(bu)2.616 G .116(iltin command \(see).2 F F3 .116
+(SHELL B)2.616 F(UIL)-.09 E .116(TIN COMMANDS)-.828 F F0(belo)2.366 E
+2.616(w\). The)-.25 F .116(options ap-)2.616 F 1.067(pearing in)144
+691.2 R F3 -.27(BA)3.567 G(SHOPTS).27 E F0 1.067(are those reported as)
+3.317 F F2(on)3.797 E F0(by)3.807 E F1(shopt)3.567 E F0 6.066(.I)C 3.566
+(ft)-6.066 G 1.066(his v)-3.566 F 1.066(ariable is in the en)-.25 F
+(vironment)-.4 E(when)144 703.2 Q F1(bash)3.141 E F0 .642(starts up, ea\
+ch shell option in the list will be enabled before reading an)3.141 F
+3.142(ys)-.15 G .642(tartup \214les.)-3.142 F(This v)144 715.2 Q
+(ariable is read-only)-.25 E(.)-.65 E(GNU Bash 5.1)72 768 Q
+(2020 October 29)141.235 E(10)190.395 E 0 Cg EP
+%%Page: 11 11
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF -.3(BA)108 84 S(SHPID).3 E F0 .188
+(Expands to the process ID of the current)144 96 R F1(bash)2.688 E F0
+2.687(process. This)2.687 F(dif)2.687 E .187(fers from)-.25 F F1($$)
+2.687 E F0 .187(under certain circum-)2.687 F .548
+(stances, such as subshells that do not require)144 108 R F1(bash)3.048
+E F0 .548(to be re-initialized.)3.048 F .549(Assignments to)5.549 F/F2 9
+/Times-Bold@0 SF -.27(BA)3.049 G(SHPID).27 E F0(ha)144 120 Q .3 -.15
+(ve n)-.2 H 2.5(oe).15 G -.25(ff)-2.5 G 2.5(ect. If).25 F F1 -.3(BA)2.5
+G(SHPID).3 E F0(is unset, it loses its special properties, e)2.5 E -.15
+(ve)-.25 G 2.5(ni).15 G 2.5(fi)-2.5 G 2.5(ti)-2.5 G 2.5(ss)-2.5 G
+(ubsequently reset.)-2.5 E F1 -.3(BA)108 132 S(SH_ALIASES).3 E F0 1.195
+(An associati)144 144 R 1.495 -.15(ve a)-.25 H 1.195(rray v).15 F 1.195
+(ariable whose members correspond to the internal list of aliases as ma\
+in-)-.25 F .16(tained by the)144 156 R F1(alias)2.66 E F0 -.2(bu)2.66 G
+2.66(iltin. Elements).2 F .16
+(added to this array appear in the alias list; ho)2.66 F(we)-.25 E -.15
+(ve)-.25 G .96 -.4(r, u).15 H(nsetting).4 E 4.503
+(array elements currently does not cause aliases to be remo)144 168 R
+-.15(ve)-.15 G 7.003(df).15 G 4.503(rom the alias list.)-7.003 F(If)
+9.502 E F1 -.3(BA)144 180 S(SH_ALIASES).3 E F0
+(is unset, it loses its special properties, e)2.5 E -.15(ve)-.25 G 2.5
+(ni).15 G 2.5(fi)-2.5 G 2.5(ti)-2.5 G 2.5(ss)-2.5 G(ubsequently reset.)
+-2.5 E F1 -.3(BA)108 192 S(SH_ARGC).3 E F0 .934(An array v)144 204 R
+.934(ariable whose v)-.25 F .934
+(alues are the number of parameters in each frame of the current)-.25 F
+F1(bash)3.435 E F0 -.15(exe)144 216 S .535(cution call stack.).15 F .535
+(The number of parameters to the current subroutine \(shell function or\
+ script)5.535 F -.15(exe)144 228 S .141(cuted with).15 F F1(.)2.641 E F0
+(or)2.641 E F1(sour)2.641 E(ce)-.18 E F0 2.641(\)i)C 2.641(sa)-2.641 G
+2.641(tt)-2.641 G .142(he top of the stack.)-2.641 F .142
+(When a subroutine is e)5.142 F -.15(xe)-.15 G .142
+(cuted, the number of).15 F 1.265(parameters passed is pushed onto)144
+240 R F2 -.27(BA)3.765 G(SH_ARGC).27 E/F3 9/Times-Roman@0 SF(.)A F0
+1.265(The shell sets)5.765 F F2 -.27(BA)3.765 G(SH_ARGC).27 E F0 1.265
+(only when in e)3.515 F(x-)-.15 E .947(tended deb)144 252 R .947
+(ugging mode \(see the description of the)-.2 F F1(extdeb)3.447 E(ug)-.2
+E F0 .947(option to the)3.447 F F1(shopt)3.447 E F0 -.2(bu)3.448 G .948
+(iltin belo).2 F(w\).)-.25 E(Setting)144 264 Q F1(extdeb)3.363 E(ug)-.2
+E F0 .863(after the shell has started to e)3.363 F -.15(xe)-.15 G .862
+(cute a script, or referencing this v).15 F .862(ariable when)-.25 F F1
+(extdeb)144 276 Q(ug)-.2 E F0(is not set, may result in inconsistent v)
+2.5 E(alues.)-.25 E F1 -.3(BA)108 288 S(SH_ARGV).3 E F0 .206(An array v)
+144 300 R .206(ariable containing all of the parameters in the current)
+-.25 F F1(bash)2.706 E F0 -.15(exe)2.706 G .207(cution call stack.).15 F
+.207(The \214-)5.207 F .567(nal parameter of the last subroutine call i\
+s at the top of the stack; the \214rst parameter of the initial)144 312
+R 1.424(call is at the bottom.)144 324 R 1.424(When a subroutine is e)
+6.424 F -.15(xe)-.15 G 1.424
+(cuted, the parameters supplied are pushed onto).15 F F2 -.27(BA)144 336
+S(SH_ARGV).27 E F3(.)A F0 .854(The shell sets)5.354 F F2 -.27(BA)3.354 G
+(SH_ARGV).27 E F0 .853(only when in e)3.104 F .853(xtended deb)-.15 F
+.853(ugging mode \(see the de-)-.2 F .475(scription of the)144 348 R F1
+(extdeb)2.975 E(ug)-.2 E F0 .475(option to the)2.975 F F1(shopt)2.975 E
+F0 -.2(bu)2.975 G .475(iltin belo).2 F 2.975(w\). Setting)-.25 F F1
+(extdeb)2.976 E(ug)-.2 E F0 .476(after the shell has)2.976 F .45
+(started to e)144 360 R -.15(xe)-.15 G .45
+(cute a script, or referencing this v).15 F .45(ariable when)-.25 F F1
+(extdeb)2.95 E(ug)-.2 E F0 .45(is not set, may result in in-)2.95 F
+(consistent v)144 372 Q(alues.)-.25 E F1 -.3(BA)108 384 S(SH_ARGV0).3 E
+F0 .25(When referenced, this v)144 396 R .25(ariable e)-.25 F .251
+(xpands to the name of the shell or shell script \(identical to)-.15 F
+F1($0)2.751 E F0 2.751(;s)C(ee)-2.751 E .041
+(the description of special parameter 0 abo)144 408 R -.15(ve)-.15 G
+2.541(\). Assignment).15 F(to)2.541 E F1 -.3(BA)2.541 G(SH_ARGV0).3 E F0
+.04(causes the v)2.541 F .04(alue as-)-.25 F .216
+(signed to also be assigned to)144 420 R F1($0)2.716 E F0 5.216(.I)C(f)
+-5.216 E F1 -.3(BA)2.716 G(SH_ARGV0).3 E F0 .216
+(is unset, it loses its special properties, e)2.716 F -.15(ve)-.25 G
+2.716(ni).15 G(f)-2.716 E(it is subsequently reset.)144 432 Q F1 -.3(BA)
+108 444 S(SH_CMDS).3 E F0 .668(An associati)144 456 R .968 -.15(ve a)
+-.25 H .668(rray v).15 F .668(ariable whose members correspond to the i\
+nternal hash table of commands)-.25 F .195(as maintained by the)144 468
+R F1(hash)2.695 E F0 -.2(bu)2.695 G 2.695(iltin. Elements).2 F .196
+(added to this array appear in the hash table; ho)2.696 F(we)-.25 E -.15
+(ve)-.25 G -.4(r,).15 G .852(unsetting array elements currently does no\
+t cause command names to be remo)144 480 R -.15(ve)-.15 G 3.352(df).15 G
+.852(rom the hash)-3.352 F 2.5(table. If)144 492 R F1 -.3(BA)2.5 G
+(SH_CMDS).3 E F0(is unset, it loses its special properties, e)2.5 E -.15
+(ve)-.25 G 2.5(ni).15 G 2.5(fi)-2.5 G 2.5(ti)-2.5 G 2.5(ss)-2.5 G
+(ubsequently reset.)-2.5 E F1 -.3(BA)108 504 S(SH_COMMAND).3 E F0 1.242
+(The command currently being e)144 516 R -.15(xe)-.15 G 1.243
+(cuted or about to be e).15 F -.15(xe)-.15 G 1.243
+(cuted, unless the shell is e).15 F -.15(xe)-.15 G 1.243(cuting a).15 F
+.263(command as the result of a trap, in which case it is the command e)
+144 528 R -.15(xe)-.15 G .262(cuting at the time of the trap.).15 F(If)
+144 540 Q F1 -.3(BA)2.5 G(SH_COMMAND).3 E F0
+(is unset, it loses its special properties, e)2.5 E -.15(ve)-.25 G 2.5
+(ni).15 G 2.5(fi)-2.5 G 2.5(ti)-2.5 G 2.5(ss)-2.5 G(ubsequently reset.)
+-2.5 E F1 -.3(BA)108 552 S(SH_EXECUTION_STRING).3 E F0(The command ar)
+144 564 Q(gument to the)-.18 E F1<ad63>2.5 E F0(in)2.5 E -.2(vo)-.4 G
+(cation option.).2 E F1 -.3(BA)108 576 S(SH_LINENO).3 E F0 .692
+(An array v)144 588 R .692(ariable whose members are the line numbers i\
+n source \214les where each corresponding)-.25 F .97(member of)144 600 R
+F2(FUNCN)3.47 E(AME)-.18 E F0 -.1(wa)3.22 G 3.47(si).1 G -1.9 -.4(nv o)
+-3.47 H -.1(ke).4 G(d.).1 E F1(${B)5.969 E(ASH_LINENO[)-.3 E/F4 10
+/Times-Italic@0 SF($i)A F1(]})A F0 .969
+(is the line number in the source)3.469 F 14.671(\214le \()144 612 R F1
+(${B)A(ASH_SOURCE[)-.3 E F4($i+1)A F1(]})A F0 17.171(\)w)C(here)-17.171
+E F1(${FUNCN)17.172 E(AME[)-.2 E F4($i)A F1(]})A F0 -.1(wa)17.172 G
+17.172(sc).1 G 14.672(alled \(or)-17.172 F F1(${B)144 624 Q(ASH_LINENO[)
+-.3 E F4($i-1)A F1(]})A F0 .115
+(if referenced within another shell function\).)2.615 F(Use)5.115 E F2
+(LINENO)2.615 E F0 .115(to obtain the)2.365 F(current line number)144
+636 Q(.)-.55 E F1 -.3(BA)108 648 S(SH_LO).3 E(AD)-.4 E(ABLES_P)-.35 E
+-.95(AT)-.74 G(H).95 E F0 4.07(Ac)144 660 S 1.57(olon-separated list of\
+ directories in which the shell looks for dynamically loadable b)-4.07 F
+(uiltins)-.2 E(speci\214ed by the)144 672 Q F1(enable)2.5 E F0(command.)
+2.5 E F1 -.3(BA)108 684 S(SH_REMA).3 E(TCH)-.95 E F0 .006(An array v)144
+696 R .006(ariable whose members are assigned by the)-.25 F F1(=~)2.506
+E F0 .005(binary operator to the)2.506 F F1([[)2.505 E F0 .005
+(conditional com-)2.505 F 2.506(mand. The)144 708 R .007
+(element with inde)2.506 F 2.507(x0i)-.15 G 2.507(st)-2.507 G .007
+(he portion of the string matching the entire re)-2.507 F .007(gular e)
+-.15 F(xpression.)-.15 E 4.331(The element with inde)144 720 R(x)-.15 E
+F4(n)6.831 E F0 4.331(is the portion of the string matching the)6.831 F
+F4(n)6.83 E F0 4.33(th parenthesized)B(GNU Bash 5.1)72 768 Q
+(2020 October 29)141.235 E(11)190.395 E 0 Cg EP
+%%Page: 12 12
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E(sube)144 84 Q
+(xpression.)-.15 E/F1 10/Times-Bold@0 SF -.3(BA)108 96 S(SH_SOURCE).3 E
+F0 .125(An array v)144 108 R .125(ariable whose members are the source \
+\214lenames where the corresponding shell function)-.25 F .781
+(names in the)144 120 R/F2 9/Times-Bold@0 SF(FUNCN)3.28 E(AME)-.18 E F0
+.78(array v)3.03 F .78(ariable are de\214ned.)-.25 F .78
+(The shell function)5.78 F F1(${FUNCN)3.28 E(AME[)-.2 E/F3 10
+/Times-Italic@0 SF($i)A F1(]})A F0(is)3.28 E(de\214ned in the \214le)144
+132 Q F1(${B)2.5 E(ASH_SOURCE[)-.3 E F3($i)A F1(]})A F0(and called from)
+2.5 E F1(${B)2.5 E(ASH_SOURCE[)-.3 E F3($i+1)A F1(]})A F0(.)A F1 -.3(BA)
+108 144 S(SH_SUBSHELL).3 E F0 .296
+(Incremented by one within each subshell or subshell en)144 156 R .296
+(vironment when the shell be)-.4 F .297(gins e)-.15 F -.15(xe)-.15 G
+(cuting).15 E 1.277(in that en)144 168 R 3.777(vironment. The)-.4 F
+1.277(initial v)3.777 F 1.277(alue is 0.)-.25 F(If)6.277 E F1 -.3(BA)
+3.777 G(SH_SUBSHELL).3 E F0 1.276(is unset, it loses its special)3.777 F
+(properties, e)144 180 Q -.15(ve)-.25 G 2.5(ni).15 G 2.5(fi)-2.5 G 2.5
+(ti)-2.5 G 2.5(ss)-2.5 G(ubsequently reset.)-2.5 E F1 -.3(BA)108 192 S
+(SH_VERSINFO).3 E F0 2.644(Ar)144 204 S .144(eadonly array v)-2.644 F
+.144(ariable whose members hold v)-.25 F .144
+(ersion information for this instance of)-.15 F F1(bash)2.645 E F0 5.145
+(.T)C(he)-5.145 E -.25(va)144 216 S
+(lues assigned to the array members are as follo).25 E(ws:)-.25 E F1 -.3
+(BA)144 234 S(SH_VERSINFO[).3 E F0(0)A F1(])A F0(The major v)264 234 Q
+(ersion number \(the)-.15 E F3 -.37(re)2.5 G(lease).37 E F0(\).)A F1 -.3
+(BA)144 246 S(SH_VERSINFO[).3 E F0(1)A F1(])A F0(The minor v)264 246 Q
+(ersion number \(the)-.15 E F3(ver)2.5 E(sion)-.1 E F0(\).)A F1 -.3(BA)
+144 258 S(SH_VERSINFO[).3 E F0(2)A F1(])A F0(The patch le)264 258 Q -.15
+(ve)-.25 G(l.).15 E F1 -.3(BA)144 270 S(SH_VERSINFO[).3 E F0(3)A F1(])A
+F0(The b)264 270 Q(uild v)-.2 E(ersion.)-.15 E F1 -.3(BA)144 282 S
+(SH_VERSINFO[).3 E F0(4)A F1(])A F0(The release status \(e.g.,)264 282 Q
+F3(beta1)2.5 E F0(\).)A F1 -.3(BA)144 294 S(SH_VERSINFO[).3 E F0(5)A F1
+(])A F0(The v)264 294 Q(alue of)-.25 E F2(MA)2.5 E(CHTYPE)-.495 E/F4 9
+/Times-Roman@0 SF(.)A F1 -.3(BA)108 306 S(SH_VERSION).3 E F0
+(Expands to a string describing the v)144 318 Q
+(ersion of this instance of)-.15 E F1(bash)2.5 E F0(.)A F1(COMP_CW)108
+330 Q(ORD)-.1 E F0 .397(An inde)144 342 R 2.897(xi)-.15 G(nto)-2.897 E
+F1(${COMP_W)2.896 E(ORDS})-.1 E F0 .396(of the w)2.896 F .396
+(ord containing the current cursor position.)-.1 F .396(This v)5.396 F
+(ari-)-.25 E 1.18(able is a)144 354 R -.25(va)-.2 G 1.181
+(ilable only in shell functions in).25 F -.2(vo)-.4 G -.1(ke).2 G 3.681
+(db).1 G 3.681(yt)-3.681 G 1.181(he programmable completion f)-3.681 F
+1.181(acilities \(see)-.1 F F1(Pr)144 366 Q(ogrammable Completion)-.18 E
+F0(belo)2.5 E(w\).)-.25 E F1(COMP_KEY)108 378 Q F0(The k)144 390 Q .3
+-.15(ey \()-.1 H(or \214nal k).15 E .3 -.15(ey o)-.1 H 2.5(fak).15 G .3
+-.15(ey s)-2.6 H(equence\) used to in).15 E -.2(vo)-.4 G .2 -.1(ke t).2
+H(he current completion function.).1 E F1(COMP_LINE)108 402 Q F0 1.208
+(The current command line.)144 414 R 1.208(This v)6.208 F 1.208
+(ariable is a)-.25 F -.25(va)-.2 G 1.208
+(ilable only in shell functions and e).25 F 1.207(xternal com-)-.15 F
+1.037(mands in)144 426 R -.2(vo)-.4 G -.1(ke).2 G 3.537(db).1 G 3.537
+(yt)-3.537 G 1.037(he programmable completion f)-3.537 F 1.037
+(acilities \(see)-.1 F F1(Pr)3.537 E 1.037(ogrammable Completion)-.18 F
+F0(be-)3.537 E(lo)144 438 Q(w\).)-.25 E F1(COMP_POINT)108 450 Q F0 .667
+(The inde)144 462 R 3.167(xo)-.15 G 3.167(ft)-3.167 G .666
+(he current cursor position relati)-3.167 F .966 -.15(ve t)-.25 H 3.166
+(ot).15 G .666(he be)-3.166 F .666(ginning of the current command.)-.15
+F .666(If the)5.666 F .534
+(current cursor position is at the end of the current command, the v)144
+474 R .535(alue of this v)-.25 F .535(ariable is equal to)-.25 F F1
+(${#COMP_LINE})144 486 Q F0 5.705(.T)C .705(his v)-5.705 F .704
+(ariable is a)-.25 F -.25(va)-.2 G .704
+(ilable only in shell functions and e).25 F .704(xternal commands in-)
+-.15 F -.2(vo)144 498 S -.1(ke).2 G 2.5(db).1 G 2.5(yt)-2.5 G
+(he programmable completion f)-2.5 E(acilities \(see)-.1 E F1(Pr)2.5 E
+(ogrammable Completion)-.18 E F0(belo)2.5 E(w\).)-.25 E F1(COMP_TYPE)108
+510 Q F0 .041(Set to an inte)144 522 R .041(ger v)-.15 F .041(alue corr\
+esponding to the type of completion attempted that caused a completion)
+-.25 F .338(function to be called:)144 534 R F3 -.5(TA)2.837 G(B).5 E F0
+2.837(,f)C .337(or normal completion,)-2.837 F F3(?)2.837 E F0 2.837(,f)
+C .337(or listing completions after successi)-2.837 F .637 -.15(ve t)
+-.25 H(abs,).15 E F3(!)144 546 Q F0 3.067(,f)C .567
+(or listing alternati)-3.067 F -.15(ve)-.25 G 3.067(so).15 G 3.067(np)
+-3.067 G .567(artial w)-3.067 F .567(ord completion,)-.1 F F3(@)3.067 E
+F0 3.067(,t)C 3.067(ol)-3.067 G .567(ist completions if the w)-3.067 F
+.567(ord is not un-)-.1 F .418(modi\214ed, or)144 558 R F3(%)2.918 E F0
+2.918(,f)C .418(or menu completion.)-2.918 F .417(This v)5.417 F .417
+(ariable is a)-.25 F -.25(va)-.2 G .417
+(ilable only in shell functions and e).25 F(xter)-.15 E(-)-.2 E .704
+(nal commands in)144 570 R -.2(vo)-.4 G -.1(ke).2 G 3.204(db).1 G 3.204
+(yt)-3.204 G .704(he programmable completion f)-3.204 F .704
+(acilities \(see)-.1 F F1(Pr)3.204 E .704(ogrammable Comple-)-.18 F
+(tion)144 582 Q F0(belo)2.5 E(w\).)-.25 E F1(COMP_W)108 594 Q(ORDBREAKS)
+-.1 E F0 1.336(The set of characters that the)144 606 R F1 -.18(re)3.836
+G(adline).18 E F0 1.336(library treats as w)3.836 F 1.335
+(ord separators when performing w)-.1 F(ord)-.1 E 3.125(completion. If)
+144 618 R F2(COMP_W)3.125 E(ORDBREAKS)-.09 E F0 .626
+(is unset, it loses its special properties, e)2.875 F -.15(ve)-.25 G
+3.126(ni).15 G 3.126(fi)-3.126 G 3.126(ti)-3.126 G 3.126(ss)-3.126 G
+(ubse-)-3.126 E(quently reset.)144 630 Q F1(COMP_W)108 642 Q(ORDS)-.1 E
+F0 .654(An array v)144 654 R .654(ariable \(see)-.25 F F1(Arrays)3.154 E
+F0(belo)3.154 E .654(w\) consisting of the indi)-.25 F .653(vidual w)
+-.25 F .653(ords in the current command)-.1 F 3.191(line. The)144 666 R
+.692(line is split into w)3.192 F .692(ords as)-.1 F F1 -.18(re)3.192 G
+(adline).18 E F0 -.1(wo)3.192 G .692(uld split it, using).1 F F2(COMP_W)
+3.192 E(ORDBREAKS)-.09 E F0 .692(as de-)2.942 F 1.558(scribed abo)144
+678 R -.15(ve)-.15 G 6.558(.T).15 G 1.558(his v)-6.558 F 1.558
+(ariable is a)-.25 F -.25(va)-.2 G 1.558
+(ilable only in shell functions in).25 F -.2(vo)-.4 G -.1(ke).2 G 4.057
+(db).1 G 4.057(yt)-4.057 G 1.557(he programmable)-4.057 F(completion f)
+144 690 Q(acilities \(see)-.1 E F1(Pr)2.5 E(ogrammable Completion)-.18 E
+F0(belo)2.5 E(w\).)-.25 E F1(COPR)108 702 Q(OC)-.3 E F0 .168(An array v)
+144 714 R .168(ariable \(see)-.25 F F1(Arrays)2.668 E F0(belo)2.669 E
+.169
+(w\) created to hold the \214le descriptors for output from and input)
+-.25 F(to an unnamed coprocess \(see)144 726 Q F1(Copr)2.5 E(ocesses)
+-.18 E F0(abo)2.5 E -.15(ve)-.15 G(\).).15 E(GNU Bash 5.1)72 768 Q
+(2020 October 29)141.235 E(12)190.395 E 0 Cg EP
+%%Page: 13 13
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(DIRST)108 84 Q -.55(AC)-.9 G(K).55 E F0 .79(An array v)144 96 R .79
+(ariable \(see)-.25 F F1(Arrays)3.29 E F0(belo)3.289 E .789
+(w\) containing the current contents of the directory stack.)-.25 F(Di-)
+5.789 E .099(rectories appear in the stack in the order the)144 108 R
+2.599(ya)-.15 G .099(re displayed by the)-2.599 F F1(dirs)2.599 E F0 -.2
+(bu)2.599 G 2.599(iltin. Assigning).2 F .099(to mem-)2.599 F .84
+(bers of this array v)144 120 R .84
+(ariable may be used to modify directories already in the stack, b)-.25
+F .84(ut the)-.2 F F1(pushd)3.34 E F0(and)144 132 Q F1(popd)3.45 E F0
+-.2(bu)3.45 G .951(iltins must be used to add and remo).2 F 1.251 -.15
+(ve d)-.15 H 3.451(irectories. Assignment).15 F .951(to this v)3.451 F
+.951(ariable will)-.25 F .379(not change the current directory)144 144 R
+5.379(.I)-.65 G(f)-5.379 E/F2 9/Times-Bold@0 SF(DIRST)2.879 E -.495(AC)
+-.81 G(K).495 E F0 .378(is unset, it loses its special properties, e)
+2.629 F -.15(ve)-.25 G 2.878(ni).15 G 2.878(fi)-2.878 G 2.878(ti)-2.878
+G(s)-2.878 E(subsequently reset.)144 156 Q F1(EPOCHREAL)108 168 Q(TIME)
+-.92 E F0 .337(Each time this parameter is referenced, it e)144 180 R
+.338(xpands to the number of seconds since the Unix Epoch)-.15 F(\(see)
+144 192 Q/F3 10/Times-Italic@0 SF(time)2.917 E F0 .417
+(\(3\)\) as a \215oating point v)B .416
+(alue with micro-second granularity)-.25 F 5.416(.A)-.65 G .416
+(ssignments to)-5.416 F F2(EPOCHRE-)2.916 E(AL)144 204 Q(TIME)-.828 E F0
+1.09(are ignored.)3.34 F(If)6.09 E F2(EPOCHREAL)3.59 E(TIME)-.828 E F0
+1.09(is unset, it loses its special properties, e)3.34 F -.15(ve)-.25 G
+3.591(ni).15 G 3.591(fi)-3.591 G 3.591(ti)-3.591 G(s)-3.591 E
+(subsequently reset.)144 216 Q F1(EPOCHSECONDS)108 228 Q F0 .338
+(Each time this parameter is referenced, it e)144 240 R .337
+(xpands to the number of seconds since the Unix Epoch)-.15 F(\(see)144
+252 Q F3(time)4.041 E F0 4.041(\(3\)\). Assignments)B(to)4.041 E F2
+(EPOCHSECONDS)4.041 E F0 1.542(are ignored.)3.792 F(If)6.542 E F2
+(EPOCHSECONDS)4.042 E F0 1.542(is unset, it)3.792 F
+(loses its special properties, e)144 264 Q -.15(ve)-.25 G 2.5(ni).15 G
+2.5(fi)-2.5 G 2.5(ti)-2.5 G 2.5(ss)-2.5 G(ubsequently reset.)-2.5 E F1
+(EUID)108 276 Q F0 1.104(Expands to the ef)144 276 R(fecti)-.25 E 1.403
+-.15(ve u)-.25 H 1.103(ser ID of the current user).15 F 3.603(,i)-.4 G
+1.103(nitialized at shell startup.)-3.603 F 1.103(This v)6.103 F 1.103
+(ariable is)-.25 F(readonly)144 288 Q(.)-.65 E F1(FUNCN)108 300 Q(AME)
+-.2 E F0 .478(An array v)144 312 R .479
+(ariable containing the names of all shell functions currently in the e)
+-.25 F -.15(xe)-.15 G .479(cution call stack.).15 F .277
+(The element with inde)144 324 R 2.777(x0i)-.15 G 2.777(st)-2.777 G .276
+(he name of an)-2.777 F 2.776(yc)-.15 G(urrently-e)-2.776 E -.15(xe)-.15
+G .276(cuting shell function.).15 F .276(The bottom-most)5.276 F .384
+(element \(the one with the highest inde)144 336 R .384(x\) is)-.15 F/F4
+10/Courier@0 SF("main")2.884 E F0 5.384(.T)C .384(his v)-5.384 F .385
+(ariable e)-.25 F .385(xists only when a shell func-)-.15 F .076
+(tion is e)144 348 R -.15(xe)-.15 G 2.576(cuting. Assignments).15 F(to)
+2.576 E F2(FUNCN)2.576 E(AME)-.18 E F0(ha)2.326 E .376 -.15(ve n)-.2 H
+2.576(oe).15 G -.25(ff)-2.576 G 2.576(ect. If).25 F F2(FUNCN)2.575 E
+(AME)-.18 E F0 .075(is unset, it loses its)2.325 F
+(special properties, e)144 360 Q -.15(ve)-.25 G 2.5(ni).15 G 2.5(fi)-2.5
+G 2.5(ti)-2.5 G 2.5(ss)-2.5 G(ubsequently reset.)-2.5 E .11(This v)144
+378 R .111(ariable can be used with)-.25 F F1 -.3(BA)2.611 G(SH_LINENO)
+.3 E F0(and)2.611 E F1 -.3(BA)2.611 G(SH_SOURCE).3 E F0 5.111(.E)C .111
+(ach element of)-5.111 F F1(FUNC-)2.611 E -.2(NA)144 390 S(ME).2 E F0
+1.404(has corresponding elements in)3.904 F F1 -.3(BA)3.904 G(SH_LINENO)
+.3 E F0(and)3.904 E F1 -.3(BA)3.904 G(SH_SOURCE).3 E F0 1.404
+(to describe the)3.904 F .012(call stack.)144 402 R -.15(Fo)5.012 G
+2.512(ri).15 G(nstance,)-2.512 E F1(${FUNCN)2.512 E(AME[)-.2 E F3($i)A
+F1(]})A F0 -.1(wa)2.512 G 2.512(sc).1 G .012(alled from the \214le)
+-2.512 F F1(${B)2.512 E(ASH_SOURCE[)-.3 E F3($i+1)A F1(]})A F0 1.184
+(at line number)144 414 R F1(${B)3.684 E(ASH_LINENO[)-.3 E F3($i)A F1
+(]})A F0 6.184(.T)C(he)-6.184 E F1(caller)3.683 E F0 -.2(bu)3.683 G
+1.183(iltin displays the current call stack using).2 F
+(this information.)144 426 Q F1(GR)108 438 Q(OUPS)-.3 E F0 1.228
+(An array v)144 450 R 1.228(ariable containing the list of groups of wh\
+ich the current user is a member)-.25 F 6.229(.A)-.55 G(ssign-)-6.229 E
+.572(ments to)144 462 R F2(GR)3.072 E(OUPS)-.27 E F0(ha)2.822 E .872
+-.15(ve n)-.2 H 3.072(oe).15 G -.25(ff)-3.072 G 3.072(ect. If).25 F F2
+(GR)3.072 E(OUPS)-.27 E F0 .572
+(is unset, it loses its special properties, e)2.822 F -.15(ve)-.25 G
+3.072(ni).15 G 3.071(fi)-3.072 G 3.071(ti)-3.071 G(s)-3.071 E
+(subsequently reset.)144 474 Q F1(HISTCMD)108 486 Q F0 2.81
+(The history number)144 498 R 5.31(,o)-.4 G 5.31(ri)-5.31 G(nde)-5.31 E
+5.311(xi)-.15 G 5.311(nt)-5.311 G 2.811
+(he history list, of the current command.)-5.311 F 2.811(Assignments to)
+7.811 F F2(HISTCMD)144 510 Q F0 1.135(are ignored.)3.385 F(If)6.135 E F2
+(HISTCMD)3.635 E F0 1.135(is unset, it loses its special properties, e)
+3.385 F -.15(ve)-.25 G 3.634(ni).15 G 3.634(fi)-3.634 G 3.634(ti)-3.634
+G 3.634(ss)-3.634 G(ubse-)-3.634 E(quently reset.)144 522 Q F1(HOSTN)108
+534 Q(AME)-.2 E F0(Automatically set to the name of the current host.)
+144 546 Q F1(HOSTTYPE)108 558 Q F0 .222(Automatically set to a string t\
+hat uniquely describes the type of machine on which)144 570 R F1(bash)
+2.723 E F0 .223(is e)2.723 F -.15(xe)-.15 G(cut-).15 E 2.5(ing. The)144
+582 R(def)2.5 E(ault is system-dependent.)-.1 E F1(LINENO)108 594 Q F0
+1.408(Each time this parameter is referenced, the shell substitutes a d\
+ecimal number representing the)144 606 R .078(current sequential line n\
+umber \(starting with 1\) within a script or function.)144 618 R .079
+(When not in a script or)5.078 F .307(function, the v)144 630 R .307
+(alue substituted is not guaranteed to be meaningful.)-.25 F(If)5.306 E
+F2(LINENO)2.806 E F0 .306(is unset, it loses its)2.556 F
+(special properties, e)144 642 Q -.15(ve)-.25 G 2.5(ni).15 G 2.5(fi)-2.5
+G 2.5(ti)-2.5 G 2.5(ss)-2.5 G(ubsequently reset.)-2.5 E F1(MA)108 654 Q
+(CHTYPE)-.55 E F0 .898(Automatically set to a string that fully describ\
+es the system type on which)144 666 R F1(bash)3.398 E F0 .899(is e)3.398
+F -.15(xe)-.15 G .899(cuting, in).15 F(the standard GNU)144 678 Q F3
+(cpu-company-system)2.5 E F0 2.5(format. The)2.5 F(def)2.5 E
+(ault is system-dependent.)-.1 E F1(MAPFILE)108 690 Q F0 .294
+(An array v)144 702 R .294(ariable \(see)-.25 F F1(Arrays)2.794 E F0
+(belo)2.794 E .294(w\) created to hold the te)-.25 F .293
+(xt read by the)-.15 F F1(map\214le)2.793 E F0 -.2(bu)2.793 G .293
+(iltin when no).2 F -.25(va)144 714 S(riable name is supplied.).25 E
+(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(13)190.395 E 0 Cg EP
+%%Page: 14 14
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(OLDPWD)108 84 Q F0(The pre)144 96 Q(vious w)-.25 E
+(orking directory as set by the)-.1 E F1(cd)2.5 E F0(command.)2.5 E F1
+(OPT)108 108 Q(ARG)-.9 E F0 1.626(The v)144 120 R 1.627
+(alue of the last option ar)-.25 F 1.627(gument processed by the)-.18 F
+F1(getopts)4.127 E F0 -.2(bu)4.127 G 1.627(iltin command \(see).2 F/F2 9
+/Times-Bold@0 SF(SHELL)4.127 E -.09(BU)144 132 S(IL).09 E(TIN COMMANDS)
+-.828 E F0(belo)2.25 E(w\).)-.25 E F1(OPTIND)108 144 Q F0 1.652
+(The inde)144 156 R 4.152(xo)-.15 G 4.152(ft)-4.152 G 1.652(he ne)-4.152
+F 1.652(xt ar)-.15 F 1.652(gument to be processed by the)-.18 F F1
+(getopts)4.151 E F0 -.2(bu)4.151 G 1.651(iltin command \(see).2 F F2
+(SHELL)4.151 E -.09(BU)144 168 S(IL).09 E(TIN COMMANDS)-.828 E F0(belo)
+2.25 E(w\).)-.25 E F1(OSTYPE)108 180 Q F0 .329(Automatically set to a s\
+tring that describes the operating system on which)144 192 R F1(bash)
+2.83 E F0 .33(is e)2.83 F -.15(xe)-.15 G 2.83(cuting. The).15 F(def)144
+204 Q(ault is system-dependent.)-.1 E F1(PIPEST)108 216 Q -.95(AT)-.9 G
+(US).95 E F0 .61(An array v)144 228 R .61(ariable \(see)-.25 F F1
+(Arrays)3.11 E F0(belo)3.11 E .61(w\) containing a list of e)-.25 F .61
+(xit status v)-.15 F .61(alues from the processes in)-.25 F
+(the most-recently-e)144 240 Q -.15(xe)-.15 G(cuted fore).15 E
+(ground pipeline \(which may contain only a single command\).)-.15 E F1
+(PPID)108 252 Q F0(The process ID of the shell')144 252 Q 2.5(sp)-.55 G
+2.5(arent. This)-2.5 F -.25(va)2.5 G(riable is readonly).25 E(.)-.65 E
+F1(PWD)108 264 Q F0(The current w)144 264 Q
+(orking directory as set by the)-.1 E F1(cd)2.5 E F0(command.)2.5 E F1
+(RANDOM)108 276 Q F0 .417(Each time this parameter is referenced, it e)
+144 288 R .417(xpands to a random inte)-.15 F .417
+(ger between 0 and 32767.)-.15 F(As-)5.417 E .551(signing a v)144 300 R
+.551(alue to)-.25 F F2(RANDOM)3.051 E F0 .551
+(initializes \(seeds\) the sequence of random numbers.)2.801 F(If)5.55 E
+F2(RANDOM)3.05 E F0(is)2.8 E(unset, it loses its special properties, e)
+144 312 Q -.15(ve)-.25 G 2.5(ni).15 G 2.5(fi)-2.5 G 2.5(ti)-2.5 G 2.5
+(ss)-2.5 G(ubsequently reset.)-2.5 E F1(READLINE_LINE)108 324 Q F0 1.546
+(The contents of the)144 336 R F1 -.18(re)4.047 G(adline).18 E F0 1.547
+(line b)4.047 F(uf)-.2 E(fer)-.25 E 4.047(,f)-.4 G 1.547(or use with)
+-4.047 F/F3 10/Courier@0 SF 1.547(bind -x)4.047 F F0(\(see)4.047 E F2
+1.547(SHELL B)4.047 F(UIL)-.09 E 1.547(TIN COM-)-.828 F(MANDS)144 348 Q
+F0(belo)2.25 E(w\).)-.25 E F1(READLINE_MARK)108 360 Q F0 .107
+(The position of the mark \(sa)144 372 R -.15(ve)-.2 G 2.607(di).15 G
+.107(nsertion point\) in the)-2.607 F F1 -.18(re)2.606 G(adline).18 E F0
+.106(line b)2.606 F(uf)-.2 E(fer)-.25 E 2.606(,f)-.4 G .106(or use with)
+-2.606 F F3 .106(bind -x)2.606 F F0(\(see)144 384 Q F2 1.016(SHELL B)
+3.516 F(UIL)-.09 E 1.016(TIN COMMANDS)-.828 F F0(belo)3.266 E 3.516
+(w\). The)-.25 F 1.017(characters between the insertion point and the)
+3.516 F(mark are often called the)144 396 Q/F4 10/Times-Italic@0 SF -.37
+(re)2.5 G(gion)-.03 E F0(.)A F1(READLINE_POINT)108 408 Q F0 .314
+(The position of the insertion point in the)144 420 R F1 -.18(re)2.813 G
+(adline).18 E F0 .313(line b)2.813 F(uf)-.2 E(fer)-.25 E 2.813(,f)-.4 G
+.313(or use with)-2.813 F F3 .313(bind -x)2.813 F F0(\(see)2.813 E F2
+(SHELL)2.813 E -.09(BU)144 432 S(IL).09 E(TIN COMMANDS)-.828 E F0(belo)
+2.25 E(w\).)-.25 E F1(REPL)108 444 Q(Y)-.92 E F0
+(Set to the line of input read by the)144 456 Q F1 -.18(re)2.5 G(ad).18
+E F0 -.2(bu)2.5 G(iltin command when no ar).2 E(guments are supplied.)
+-.18 E F1(SECONDS)108 468 Q F0 .795(Each time this parameter is referen\
+ced, the number of seconds since shell in)144 480 R -.2(vo)-.4 G .795
+(cation is returned.).2 F .713(If a v)144 492 R .712
+(alue is assigned to)-.25 F F2(SECONDS)3.212 E/F5 9/Times-Roman@0 SF(,)A
+F0 .712(the v)2.962 F .712
+(alue returned upon subsequent references is the number)-.25 F .627
+(of seconds since the assignment plus the v)144 504 R .627
+(alue assigned.)-.25 F .628(The number of seconds at shell in)5.627 F
+-.2(vo)-.4 G(ca-).2 E .458(tion and the current time is al)144 516 R -.1
+(wa)-.1 G .458(ys determined by querying the system clock.).1 F(If)5.457
+E F2(SECONDS)2.957 E F0 .457(is un-)2.707 F
+(set, it loses its special properties, e)144 528 Q -.15(ve)-.25 G 2.5
+(ni).15 G 2.5(fi)-2.5 G 2.5(ti)-2.5 G 2.5(ss)-2.5 G(ubsequently reset.)
+-2.5 E F1(SHELLOPTS)108 540 Q F0 3.262(Ac)144 552 S .763
+(olon-separated list of enabled shell options.)-3.262 F .763(Each w)
+5.763 F .763(ord in the list is a v)-.1 F .763(alid ar)-.25 F .763
+(gument for the)-.18 F F1<ad6f>144 564 Q F0 1.174(option to the)3.674 F
+F1(set)3.674 E F0 -.2(bu)3.674 G 1.174(iltin command \(see).2 F F2 1.173
+(SHELL B)3.673 F(UIL)-.09 E 1.173(TIN COMMANDS)-.828 F F0(belo)3.423 E
+3.673(w\). The)-.25 F(options)3.673 E .019(appearing in)144 576 R F2
+(SHELLOPTS)2.519 E F0 .019(are those reported as)2.269 F F4(on)2.749 E
+F0(by)2.759 E F1 .019(set \255o)2.519 F F0 5.019(.I)C 2.519(ft)-5.019 G
+.019(his v)-2.519 F .02(ariable is in the en)-.25 F(vironment)-.4 E
+(when)144 588 Q F1(bash)3.142 E F0 .642(starts up, each shell option in\
+ the list will be enabled before reading an)3.142 F 3.141(ys)-.15 G .641
+(tartup \214les.)-3.141 F(This v)144 600 Q(ariable is read-only)-.25 E
+(.)-.65 E F1(SHL)108 612 Q(VL)-.92 E F0
+(Incremented by one each time an instance of)144 624 Q F1(bash)2.5 E F0
+(is started.)2.5 E F1(SRANDOM)108 636 Q F0 .76(This v)144 648 R .76
+(ariable e)-.25 F .761(xpands to a 32-bit pseudo-random number each tim\
+e it is referenced. The random)-.15 F .565
+(number generator is not linear on systems that support)144 660 R F3
+(/dev/urandom)3.064 E F0(or)3.064 E F4(ar)3.064 E(c4r)-.37 E(andom)-.15
+E F0 3.064(,s)C 3.064(oe)-3.064 G(ach)-3.064 E .788
+(returned number has no relationship to the numbers preceding it.)144
+672 R .788(The random number generator)5.788 F .088
+(cannot be seeded, so assignments to this v)144 684 R .087(ariable ha)
+-.25 F .387 -.15(ve n)-.2 H 2.587(oe).15 G -.25(ff)-2.587 G 2.587
+(ect. If).25 F F2(SRANDOM)2.587 E F0 .087(is unset, it loses its)2.337 F
+(special properties, e)144 696 Q -.15(ve)-.25 G 2.5(ni).15 G 2.5(fi)-2.5
+G 2.5(ti)-2.5 G 2.5(ss)-2.5 G(ubsequently reset.)-2.5 E F1(UID)108 708 Q
+F0(Expands to the user ID of the current user)144 708 Q 2.5(,i)-.4 G
+(nitialized at shell startup.)-2.5 E(This v)5 E(ariable is readonly)-.25
+E(.)-.65 E .993(The follo)108 724.8 R .993(wing v)-.25 F .994
+(ariables are used by the shell.)-.25 F .994(In some cases,)5.994 F F1
+(bash)3.494 E F0 .994(assigns a def)3.494 F .994(ault v)-.1 F .994
+(alue to a v)-.25 F(ariable;)-.25 E(GNU Bash 5.1)72 768 Q
+(2020 October 29)141.235 E(14)190.395 E 0 Cg EP
+%%Page: 15 15
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E
+(these cases are noted belo)108 84 Q -.65(w.)-.25 G/F1 10/Times-Bold@0
+SF -.3(BA)108 100.8 S(SH_COMP).3 E -.95(AT)-.74 G F0 .503(The v)144
+112.8 R .502(alue is used to set the shell')-.25 F 3.002(sc)-.55 G .502
+(ompatibility le)-3.002 F -.15(ve)-.25 G 3.002(l. See).15 F/F2 9
+/Times-Bold@0 SF .502(SHELL COMP)3.002 F -.855(AT)-.666 G .502
+(IBILITY MODE).855 F F0(be-)2.752 E(lo)144 124.8 Q 2.662(wf)-.25 G .162
+(or a description of the v)-2.662 F .162(arious compatibility le)-.25 F
+-.15(ve)-.25 G .162(ls and their ef).15 F 2.663(fects. The)-.25 F -.25
+(va)2.663 G .163(lue may be a dec-).25 F .33
+(imal number \(e.g., 4.2\) or an inte)144 136.8 R .33
+(ger \(e.g., 42\) corresponding to the desired compatibility le)-.15 F
+-.15(ve)-.25 G 2.83(l. If).15 F F1 -.3(BA)144 148.8 S(SH_COMP).3 E -.95
+(AT)-.74 G F0 .86
+(is unset or set to the empty string, the compatibility le)4.31 F -.15
+(ve)-.25 G 3.361(li).15 G 3.361(ss)-3.361 G .861(et to the def)-3.361 F
+(ault)-.1 E .39(for the current v)144 160.8 R 2.89(ersion. If)-.15 F F1
+-.3(BA)2.89 G(SH_COMP).3 E -.95(AT)-.74 G F0 .39(is set to a v)3.84 F
+.39(alue that is not one of the v)-.25 F .39(alid compati-)-.25 F .277
+(bility le)144 172.8 R -.15(ve)-.25 G .278
+(ls, the shell prints an error message and sets the compatibility le).15
+F -.15(ve)-.25 G 2.778(lt).15 G 2.778(ot)-2.778 G .278(he def)-2.778 F
+.278(ault for the)-.1 F 1.401(current v)144 184.8 R 3.901(ersion. The)
+-.15 F -.25(va)3.901 G 1.401(lid v).25 F 1.401
+(alues correspond to the compatibility le)-.25 F -.15(ve)-.25 G 1.401
+(ls described belo).15 F 3.9(wu)-.25 G(nder)-3.9 E F2(BSHELL)144 196.8 Q
+/F3 9/Times-Roman@0 SF(COMP)A -.999(AT)-.828 G(IBILITY).999 E F2(MODE)A
+F3(.)A F0 -.15(Fo)4.997 G 2.997(re).15 G .497(xample, 4.2 and 42 are v)
+-3.147 F .497(alid v)-.25 F .498(alues that correspond to the)-.25 F F1
+.774(compat42 shopt)144 208.8 R F0 .774
+(option and set the compatibility le)3.274 F -.15(ve)-.25 G 3.274(lt).15
+G 3.274(o4)-3.274 G 3.274(2. The)-3.274 F .774(current v)3.274 F .773
+(ersion is also a v)-.15 F(alid)-.25 E -.25(va)144 220.8 S(lue.).25 E F1
+-.3(BA)108 232.8 S(SH_ENV).3 E F0 .505(If this parameter is set when)144
+244.8 R F1(bash)3.005 E F0 .505(is e)3.005 F -.15(xe)-.15 G .506
+(cuting a shell script, its v).15 F .506
+(alue is interpreted as a \214lename)-.25 F .391
+(containing commands to initialize the shell, as in)144 256.8 R/F4 10
+/Times-Italic@0 SF(~/.bashr)2.39 E(c)-.37 E F0 5.39(.T).31 G .39(he v)
+-5.39 F .39(alue of)-.25 F F2 -.27(BA)2.89 G(SH_ENV).27 E F0 .39
+(is subjected)2.64 F .525(to parameter e)144 268.8 R .525
+(xpansion, command substitution, and arithmetic e)-.15 F .525
+(xpansion before being interpreted)-.15 F(as a \214lename.)144 280.8 Q
+F2 -.666(PA)5 G(TH)-.189 E F0
+(is not used to search for the resultant \214lename.)2.25 E F1 -.3(BA)
+108 292.8 S(SH_XTRA).3 E(CEFD)-.55 E F0 .481(If set to an inte)144 304.8
+R .481(ger corresponding to a v)-.15 F .481(alid \214le descriptor)-.25
+F(,)-.4 E F1(bash)2.98 E F0 .48(will write the trace output gener)2.98 F
+(-)-.2 E 3.114(ated when)144 316.8 R/F5 10/Courier@0 SF 3.114(set -x)
+5.614 F F0 3.114(is enabled to that \214le descriptor)5.614 F 8.114(.T)
+-.55 G 3.114(he \214le descriptor is closed when)-8.114 F F2 -.27(BA)144
+328.8 S(SH_XTRA).27 E(CEFD)-.495 E F0 .138(is unset or assigned a ne)
+2.388 F 2.638(wv)-.25 G 2.638(alue. Unsetting)-2.888 F F2 -.27(BA)2.638
+G(SH_XTRA).27 E(CEFD)-.495 E F0 .138(or assigning it)2.388 F 2.531(the \
+empty string causes the trace output to be sent to the standard error)
+144 340.8 R 7.531(.N)-.55 G 2.531(ote that setting)-7.531 F F2 -.27(BA)
+144 352.8 S(SH_XTRA).27 E(CEFD)-.495 E F0 .74(to 2 \(the standard error\
+ \214le descriptor\) and then unsetting it will result in the)2.991 F
+(standard error being closed.)144 364.8 Q F1(CDP)108 376.8 Q -.95(AT)
+-.74 G(H).95 E F0 1.247(The search path for the)144 388.8 R F1(cd)3.747
+E F0 3.747(command. This)3.747 F 1.248
+(is a colon-separated list of directories in which the)3.747 F 3.796
+(shell looks for destination directories speci\214ed by the)144 400.8 R
+F1(cd)6.295 E F0 6.295(command. A)6.295 F 3.795(sample v)6.295 F 3.795
+(alue is)-.25 F F5(".:~:/usr")144 412.8 Q F0(.)A F1(CHILD_MAX)108 424.8
+Q F0 .997(Set the number of e)144 436.8 R .997(xited child status v)-.15
+F .997(alues for the shell to remember)-.25 F 5.997(.B)-.55 G .997
+(ash will not allo)-5.997 F 3.498(wt)-.25 G(his)-3.498 E -.25(va)144
+448.8 S 1.078(lue to be decreased belo).25 F 3.577(waP)-.25 G 1.077
+(OSIX-mandated minimum, and there is a maximum v)-3.577 F 1.077
+(alue \(cur)-.25 F(-)-.2 E(rently 8192\) that this may not e)144 460.8 Q
+2.5(xceed. The)-.15 F(minimum v)2.5 E(alue is system-dependent.)-.25 E
+F1(COLUMNS)108 472.8 Q F0 .828(Used by the)144 484.8 R F1(select)3.328 E
+F0 .829(compound command to determine the terminal width when printing \
+selection)3.328 F 3.466(lists. Automatically)144 496.8 R .966
+(set if the)3.466 F F1(checkwinsize)3.466 E F0 .966
+(option is enabled or in an interacti)3.466 F 1.266 -.15(ve s)-.25 H
+.966(hell upon re-).15 F(ceipt of a)144 508.8 Q F2(SIGWINCH)2.5 E F3(.)A
+F1(COMPREPL)108 520.8 Q(Y)-.92 E F0 .847(An array v)144 532.8 R .848
+(ariable from which)-.25 F F1(bash)3.348 E F0 .848
+(reads the possible completions generated by a shell function)3.348 F
+(in)144 544.8 Q -.2(vo)-.4 G -.1(ke).2 G 2.785(db).1 G 2.785(yt)-2.785 G
+.285(he programmable completion f)-2.785 F .285(acility \(see)-.1 F F1
+(Pr)2.785 E .285(ogrammable Completion)-.18 F F0(belo)2.785 E 2.785
+(w\). Each)-.25 F(array element contains one possible completion.)144
+556.8 Q F1(EMA)108 568.8 Q(CS)-.55 E F0(If)144 580.8 Q F1(bash)2.535 E
+F0 .035(\214nds this v)2.535 F .035(ariable in the en)-.25 F .036
+(vironment when the shell starts with v)-.4 F(alue)-.25 E F5(t)2.536 E
+F0 2.536(,i)C 2.536(ta)-2.536 G .036(ssumes that the)-2.536 F
+(shell is running in an Emacs shell b)144 592.8 Q(uf)-.2 E
+(fer and disables line editing.)-.25 E F1(ENV)108 604.8 Q F0 .671
+(Expanded and e)144 604.8 R -.15(xe)-.15 G .671(cuted similarly to).15 F
+F2 -.27(BA)3.17 G(SH_ENV).27 E F0(\(see)2.92 E F1(INV)3.17 E(OCA)-.45 E
+(TION)-.95 E F0(abo)3.17 E -.15(ve)-.15 G 3.17(\)w).15 G .67
+(hen an interacti)-3.17 F -.15(ve)-.25 G(shell is in)144 616.8 Q -.2(vo)
+-.4 G -.1(ke).2 G 2.5(di).1 G(n)-2.5 E F4(posix mode)2.5 E F0(.)A F1
+(EXECIGNORE)108 628.8 Q F0 2.716(Ac)144 640.8 S .216
+(olon-separated list of shell patterns \(see)-2.716 F F1 -.1(Pa)2.717 G
+(tter).1 E 2.717(nM)-.15 G(atching)-2.717 E F0 2.717(\)d)C .217
+(e\214ning the list of \214lenames to be)-2.717 F .117
+(ignored by command search using)144 652.8 R F1 -.74(PA)2.617 G(TH)-.21
+E F0 5.117(.F)C .116
+(iles whose full pathnames match one of these patterns)-5.117 F 1.432
+(are not considered e)144 664.8 R -.15(xe)-.15 G 1.432
+(cutable \214les for the purposes of completion and command e).15 F -.15
+(xe)-.15 G 1.433(cution via).15 F F1 -.74(PA)144 676.8 S(TH)-.21 E F0
+2.909(lookup. This)2.909 F .408(does not af)2.908 F .408(fect the beha)
+-.25 F .408(vior of the)-.2 F F1([)2.908 E F0(,)A F1(test)2.908 E F0
+2.908(,a)C(nd)-2.908 E F1([[)2.908 E F0 2.908(commands. Full)2.908 F
+(pathnames)2.908 E .364(in the command hash table are not subject to)144
+688.8 R F1(EXECIGNORE)2.864 E F0 5.364(.U)C .364(se this v)-5.364 F .364
+(ariable to ignore shared)-.25 F 1.37(library \214les that ha)144 700.8
+R 1.67 -.15(ve t)-.2 H 1.37(he e).15 F -.15(xe)-.15 G 1.37
+(cutable bit set, b).15 F 1.37(ut are not e)-.2 F -.15(xe)-.15 G 1.37
+(cutable \214les.).15 F 1.37(The pattern matching)6.37 F
+(honors the setting of the)144 712.8 Q F1(extglob)2.5 E F0
+(shell option.)2.5 E(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(15)
+190.395 E 0 Cg EP
+%%Page: 16 16
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(FCEDIT)108 84 Q F0(The def)144 96 Q(ault editor for the)-.1 E F1(fc)
+2.5 E F0 -.2(bu)2.5 G(iltin command.).2 E F1(FIGNORE)108 108 Q F0 2.598
+(Ac)144 120 S .098(olon-separated list of suf)-2.598 F<8c78>-.25 E .098
+(es to ignore when performing \214lename completion \(see)-.15 F/F2 9
+/Times-Bold@0 SF(READLINE)2.599 E F0(belo)144 132 Q 2.705(w\). A)-.25 F
+.205(\214lename whose suf)2.705 F .205
+(\214x matches one of the entries in)-.25 F F2(FIGNORE)2.705 E F0 .205
+(is e)2.455 F .204(xcluded from the list)-.15 F(of matched \214lenames.)
+144 144 Q 2.5(As)5 G(ample v)-2.5 E(alue is)-.25 E/F3 10/Courier@0 SF
+(".o:~")2.5 E F0(.)A F1(FUNCNEST)108 156 Q F0 .23(If set to a numeric v)
+144 168 R .231
+(alue greater than 0, de\214nes a maximum function nesting le)-.25 F
+-.15(ve)-.25 G 2.731(l. Function).15 F(in)2.731 E -.2(vo)-.4 G(-).2 E
+(cations that e)144 180 Q(xceed this nesting le)-.15 E -.15(ve)-.25 G
+2.5(lw).15 G(ill cause the current command to abort.)-2.5 E F1
+(GLOBIGNORE)108 192 Q F0 2.924(Ac)144 204 S .423(olon-separated list of\
+ patterns de\214ning the set of \214le names to be ignored by pathname \
+e)-2.924 F(xpan-)-.15 E 2.947(sion. If)144 216 R 2.947<618c>2.947 G .447
+(le name matched by a pathname e)-2.947 F .448
+(xpansion pattern also matches one of the patterns in)-.15 F F2
+(GLOBIGNORE)144 228 Q/F4 9/Times-Roman@0 SF(,)A F0(it is remo)2.25 E
+-.15(ve)-.15 G 2.5(df).15 G(rom the list of matches.)-2.5 E F1
+(HISTCONTR)108 240 Q(OL)-.3 E F0 2.654(Ac)144 252 S .153
+(olon-separated list of v)-2.654 F .153(alues controlling ho)-.25 F
+2.653(wc)-.25 G .153(ommands are sa)-2.653 F -.15(ve)-.2 G 2.653(do).15
+G 2.653(nt)-2.653 G .153(he history list.)-2.653 F .153(If the list)
+5.153 F .49(of v)144 264 R .49(alues includes)-.25 F/F5 10
+/Times-Italic@0 SF(ignor)3 E(espace)-.37 E F0 2.99(,l).18 G .49
+(ines which be)-2.99 F .49(gin with a)-.15 F F1(space)2.99 E F0 .49
+(character are not sa)2.99 F -.15(ve)-.2 G 2.99(di).15 G 2.99(nt)-2.99 G
+.49(he his-)-2.99 F .558(tory list.)144 276 R 3.058(Av)5.558 G .558
+(alue of)-3.308 F F5(ignor)3.068 E(edups)-.37 E F0 .558
+(causes lines matching the pre)3.328 F .557
+(vious history entry to not be sa)-.25 F -.15(ve)-.2 G(d.).15 E 2.925
+(Av)144 288 S .425(alue of)-3.175 F F5(ignor)2.935 E(eboth)-.37 E F0
+.426(is shorthand for)3.205 F F5(ignor)2.926 E(espace)-.37 E F0(and)
+2.926 E F5(ignor)2.926 E(edups)-.37 E F0 5.426(.A)C -.25(va)-2.5 G .426
+(lue of).25 F F5(er)3.116 E(asedups)-.15 E F0(causes)3.196 E .699
+(all pre)144 300 R .698
+(vious lines matching the current line to be remo)-.25 F -.15(ve)-.15 G
+3.198(df).15 G .698(rom the history list before that line is)-3.198 F
+(sa)144 312 Q -.15(ve)-.2 G 2.763(d. An).15 F 2.763(yv)-.15 G .263
+(alue not in the abo)-3.013 F .563 -.15(ve l)-.15 H .263
+(ist is ignored.).15 F(If)5.263 E F2(HISTCONTR)2.763 E(OL)-.27 E F0 .264
+(is unset, or does not include)2.513 F 2.942(av)144 324 S .442(alid v)
+-3.192 F .442(alue, all lines read by the shell parser are sa)-.25 F
+-.15(ve)-.2 G 2.941(do).15 G 2.941(nt)-2.941 G .441
+(he history list, subject to the v)-2.941 F .441(alue of)-.25 F F2
+(HISTIGNORE)144 336 Q F4(.)A F0 1.981(The second and subsequent lines o\
+f a multi-line compound command are not)6.481 F
+(tested, and are added to the history re)144 348 Q -.05(ga)-.15 G
+(rdless of the v).05 E(alue of)-.25 E F2(HISTCONTR)2.5 E(OL)-.27 E F4(.)
+A F1(HISTFILE)108 360 Q F0 .181
+(The name of the \214le in which command history is sa)144 372 R -.15
+(ve)-.2 G 2.681(d\().15 G(see)-2.681 E F2(HIST)2.681 E(OR)-.162 E(Y)
+-.315 E F0(belo)2.431 E 2.681(w\). The)-.25 F(def)2.681 E .181(ault v)
+-.1 F(alue)-.25 E(is)144 384 Q F5(~/.bash_history)2.5 E F0 5(.I)C 2.5
+(fu)-5 G(nset, the command history is not sa)-2.5 E -.15(ve)-.2 G 2.5
+(dw).15 G(hen a shell e)-2.5 E(xits.)-.15 E F1(HISTFILESIZE)108 396 Q F0
+1.622(The maximum number of lines contained in the history \214le.)144
+408 R 1.623(When this v)6.623 F 1.623(ariable is assigned a)-.25 F -.25
+(va)144 420 S .125(lue, the history \214le is truncated, if necessary)
+.25 F 2.625(,t)-.65 G 2.624(oc)-2.625 G .124
+(ontain no more than that number of lines by re-)-2.624 F(mo)144 432 Q
+.065(ving the oldest entries.)-.15 F .066(The history \214le is also tr\
+uncated to this size after writing it when a shell)5.065 F -.15(ex)144
+444 S 2.928(its. If).15 F .428(the v)2.928 F .428
+(alue is 0, the history \214le is truncated to zero size.)-.25 F .427
+(Non-numeric v)5.427 F .427(alues and numeric)-.25 F -.25(va)144 456 S
+.152(lues less than zero inhibit truncation.).25 F .152
+(The shell sets the def)5.152 F .152(ault v)-.1 F .152(alue to the v)
+-.25 F .152(alue of)-.25 F F1(HISTSIZE)2.652 E F0(after reading an)144
+468 Q 2.5(ys)-.15 G(tartup \214les.)-2.5 E F1(HISTIGNORE)108 480 Q F0
+2.658(Ac)144 492 S .158(olon-separated list of patterns used to decide \
+which command lines should be sa)-2.658 F -.15(ve)-.2 G 2.657(do).15 G
+2.657(nt)-2.657 G .157(he his-)-2.657 F .707(tory list.)144 504 R .707
+(Each pattern is anchored at the be)5.707 F .708
+(ginning of the line and must match the complete line)-.15 F .626
+(\(no implicit `)144 516 R F1(*)A F0 3.126('i)C 3.126(sa)-3.126 G 3.126
+(ppended\). Each)-3.126 F .626(pattern is tested ag)3.126 F .625
+(ainst the line after the checks speci\214ed by)-.05 F F2(HISTCONTR)144
+528 Q(OL)-.27 E F0 1.793(are applied.)4.043 F 1.793
+(In addition to the normal shell pattern matching characters, `)6.793 F
+F1(&)A F0(')A 1.44(matches the pre)144 540 R 1.44(vious history line.)
+-.25 F(`)6.44 E F1(&)A F0 3.94('m)C 1.44
+(ay be escaped using a backslash; the backslash is re-)-3.94 F(mo)144
+552 Q -.15(ve)-.15 G 3.95(db).15 G 1.45(efore attempting a match.)-3.95
+F 1.45(The second and subsequent lines of a multi-line compound)6.45 F
+1.269(command are not tested, and are added to the history re)144 564 R
+-.05(ga)-.15 G 1.269(rdless of the v).05 F 1.269(alue of)-.25 F F2
+(HISTIGNORE)3.769 E F4(.)A F0
+(The pattern matching honors the setting of the)144 576 Q F1(extglob)2.5
+E F0(shell option.)2.5 E F1(HISTSIZE)108 588 Q F0 1.387
+(The number of commands to remember in the command history \(see)144 600
+R F2(HIST)3.887 E(OR)-.162 E(Y)-.315 E F0(belo)3.637 E 3.887(w\). If)
+-.25 F(the)3.888 E -.25(va)144 612 S .413(lue is 0, commands are not sa)
+.25 F -.15(ve)-.2 G 2.913(di).15 G 2.913(nt)-2.913 G .413
+(he history list.)-2.913 F .413(Numeric v)5.413 F .412
+(alues less than zero result in e)-.25 F(v-)-.25 E .343
+(ery command being sa)144 624 R -.15(ve)-.2 G 2.843(do).15 G 2.843(nt)
+-2.843 G .343(he history list \(there is no limit\).)-2.843 F .344
+(The shell sets the def)5.343 F .344(ault v)-.1 F .344(alue to)-.25 F
+(500 after reading an)144 636 Q 2.5(ys)-.15 G(tartup \214les.)-2.5 E F1
+(HISTTIMEFORMA)108 648 Q(T)-.95 E F0 .952(If this v)144 660 R .952
+(ariable is set and not null, its v)-.25 F .951
+(alue is used as a format string for)-.25 F F5(strftime)3.451 E F0 .951
+(\(3\) to print the)B .672
+(time stamp associated with each history entry displayed by the)144 672
+R F1(history)3.173 E F0 -.2(bu)3.173 G 3.173(iltin. If).2 F .673(this v)
+3.173 F .673(ariable is)-.25 F .144
+(set, time stamps are written to the history \214le so the)144 684 R
+2.644(ym)-.15 G .144(ay be preserv)-2.644 F .144
+(ed across shell sessions.)-.15 F(This)5.144 E(uses the history comment\
+ character to distinguish timestamps from other history lines.)144 696 Q
+(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(16)190.395 E 0 Cg EP
+%%Page: 17 17
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(HOME)108 84 Q F0 1.27
+(The home directory of the current user; the def)144 96 R 1.27(ault ar)
+-.1 F 1.27(gument for the)-.18 F F1(cd)3.77 E F0 -.2(bu)3.77 G 1.27
+(iltin command.).2 F(The)6.27 E -.25(va)144 108 S(lue of this v).25 E
+(ariable is also used when performing tilde e)-.25 E(xpansion.)-.15 E F1
+(HOSTFILE)108 120 Q F0 1.015
+(Contains the name of a \214le in the same format as)144 132 R/F2 10
+/Times-Italic@0 SF(/etc/hosts)5.181 E F0 1.015
+(that should be read when the shell)5.181 F .55
+(needs to complete a hostname.)144 144 R .551
+(The list of possible hostname completions may be changed while)5.551 F
+1.059(the shell is running; the ne)144 156 R 1.059
+(xt time hostname completion is attempted after the v)-.15 F 1.058
+(alue is changed,)-.25 F F1(bash)144 168 Q F0 .138
+(adds the contents of the ne)2.638 F 2.638<778c>-.25 G .138(le to the e)
+-2.638 F .138(xisting list.)-.15 F(If)5.138 E/F3 9/Times-Bold@0 SF
+(HOSTFILE)2.638 E F0 .138(is set, b)2.388 F .139(ut has no v)-.2 F .139
+(alue, or)-.25 F .518(does not name a readable \214le,)144 180 R F1
+(bash)3.018 E F0 .518(attempts to read)3.018 F F2(/etc/hosts)4.683 E F0
+.517(to obtain the list of possible host-)4.683 F(name completions.)144
+192 Q(When)5 E F3(HOSTFILE)2.5 E F0
+(is unset, the hostname list is cleared.)2.25 E F1(IFS)108 204 Q F0(The)
+144 204 Q F2 .555(Internal F)3.635 F .555(ield Separ)-.45 F(ator)-.15 E
+F0 .555(that is used for w)3.785 F .556(ord splitting after e)-.1 F .556
+(xpansion and to split lines into)-.15 F -.1(wo)144 216 S(rds with the)
+.1 E F1 -.18(re)2.5 G(ad).18 E F0 -.2(bu)2.5 G(iltin command.).2 E
+(The def)5 E(ault v)-.1 E(alue is `)-.25 E(`<space><tab><ne)-.74 E
+(wline>')-.25 E('.)-.74 E F1(IGNOREEOF)108 228 Q F0 .503
+(Controls the action of an interacti)144 240 R .803 -.15(ve s)-.25 H
+.503(hell on receipt of an).15 F F3(EOF)3.003 E F0 .503
+(character as the sole input.)2.753 F .503(If set,)5.503 F .426(the v)
+144 252 R .426(alue is the number of consecuti)-.25 F -.15(ve)-.25 G F3
+(EOF)3.076 E F0 .426
+(characters which must be typed as the \214rst characters)2.676 F .303
+(on an input line before)144 264 R F1(bash)2.802 E F0 -.15(ex)2.802 G
+2.802(its. If).15 F .302(the v)2.802 F .302(ariable e)-.25 F .302
+(xists b)-.15 F .302(ut does not ha)-.2 F .602 -.15(ve a n)-.2 H .302
+(umeric v).15 F .302(alue, or has)-.25 F(no v)144 276 Q(alue, the def)
+-.25 E(ault v)-.1 E(alue is 10.)-.25 E(If it does not e)5 E(xist,)-.15 E
+F3(EOF)2.5 E F0(signi\214es the end of input to the shell.)2.25 E F1
+(INPUTRC)108 288 Q F0 .26(The \214lename for the)144 300 R F1 -.18(re)
+2.76 G(adline).18 E F0 .26(startup \214le, o)2.76 F -.15(ve)-.15 G .26
+(rriding the def).15 F .261(ault of)-.1 F F2(~/.inputr)4.427 E(c)-.37 E
+F0(\(see)4.427 E F3(READLINE)2.761 E F0(be-)2.511 E(lo)144 312 Q(w\).)
+-.25 E F1(INSIDE_EMA)108 324 Q(CS)-.55 E F0 .034(If this v)144 336 R
+.034(ariable appears in the en)-.25 F .034
+(vironment when the shell starts,)-.4 F F1(bash)2.533 E F0 .033
+(assumes that it is running in-)2.533 F(side an Emacs shell b)144 348 Q
+(uf)-.2 E(fer and may disable line editing, depending on the v)-.25 E
+(alue of)-.25 E F1(TERM)2.5 E F0(.)A F1(LANG)108 360 Q F0 1.239
+(Used to determine the locale cate)144 360 R 1.239(gory for an)-.15 F
+3.739(yc)-.15 G(ate)-3.739 E 1.24
+(gory not speci\214cally selected with a v)-.15 F(ariable)-.25 E
+(starting with)144 372 Q F1(LC_)2.5 E F0(.)A F1(LC_ALL)108 384 Q F0 .974
+(This v)144 396 R .974(ariable o)-.25 F -.15(ve)-.15 G .974
+(rrides the v).15 F .973(alue of)-.25 F F3(LANG)3.473 E F0 .973(and an)
+3.223 F 3.473(yo)-.15 G(ther)-3.473 E F1(LC_)3.473 E F0 -.25(va)3.473 G
+.973(riable specifying a locale cate-).25 F(gory)144 408 Q(.)-.65 E F1
+(LC_COLLA)108 420 Q(TE)-.95 E F0 .411(This v)144 432 R .412(ariable det\
+ermines the collation order used when sorting the results of pathname e)
+-.25 F(xpansion,)-.15 E 1.465(and determines the beha)144 444 R 1.465
+(vior of range e)-.2 F 1.464(xpressions, equi)-.15 F -.25(va)-.25 G
+1.464(lence classes, and collating sequences).25 F(within pathname e)144
+456 Q(xpansion and pattern matching.)-.15 E F1(LC_CTYPE)108 468 Q F0
+1.935(This v)144 480 R 1.936
+(ariable determines the interpretation of characters and the beha)-.25 F
+1.936(vior of character classes)-.2 F(within pathname e)144 492 Q
+(xpansion and pattern matching.)-.15 E F1(LC_MESSA)108 504 Q(GES)-.55 E
+F0(This v)144 516 Q(ariable determines the locale used to translate dou\
+ble-quoted strings preceded by a)-.25 E F1($)2.5 E F0(.)A F1(LC_NUMERIC)
+108 528 Q F0(This v)144 540 Q(ariable determines the locale cate)-.25 E
+(gory used for number formatting.)-.15 E F1(LC_TIME)108 552 Q F0(This v)
+144 564 Q(ariable determines the locale cate)-.25 E
+(gory used for data and time formatting.)-.15 E F1(LINES)108 576 Q F0
+.055(Used by the)144 576 R F1(select)2.555 E F0 .054(compound command t\
+o determine the column length for printing selection lists.)2.555 F .264
+(Automatically set if the)144 588 R F1(checkwinsize)2.764 E F0 .264
+(option is enabled or in an interacti)2.764 F .565 -.15(ve s)-.25 H .265
+(hell upon receipt of a).15 F F3(SIGWINCH)144 600 Q/F4 9/Times-Roman@0
+SF(.)A F1(MAIL)108 612 Q F0 .422
+(If this parameter is set to a \214le or directory name and the)144 612
+R F3(MAILP)2.921 E -.855(AT)-.666 G(H).855 E F0 -.25(va)2.671 G .421
+(riable is not set,).25 F F1(bash)2.921 E F0(in-)2.921 E
+(forms the user of the arri)144 624 Q -.25(va)-.25 G 2.5(lo).25 G 2.5
+(fm)-2.5 G(ail in the speci\214ed \214le or Maildir)-2.5 E
+(-format directory)-.2 E(.)-.65 E F1(MAILCHECK)108 636 Q F0 .098
+(Speci\214es ho)144 648 R 2.598(wo)-.25 G .098(ften \(in seconds\))
+-2.598 F F1(bash)2.598 E F0 .098(checks for mail.)2.598 F .098(The def)
+5.098 F .098(ault is 60 seconds.)-.1 F .099(When it is time)5.099 F .224
+(to check for mail, the shell does so before displaying the primary pro\
+mpt.)144 660 R .223(If this v)5.223 F .223(ariable is unset,)-.25 F
+(or set to a v)144 672 Q(alue that is not a number greater than or equa\
+l to zero, the shell disables mail checking.)-.25 E F1(MAILP)108 684 Q
+-.95(AT)-.74 G(H).95 E F0 2.99(Ac)144 696 S .49
+(olon-separated list of \214lenames to be check)-2.99 F .49
+(ed for mail.)-.1 F .49(The message to be printed when mail)5.49 F(arri)
+144 708 Q -.15(ve)-.25 G 2.62(si).15 G 2.62(nap)-2.62 G .12(articular \
+\214le may be speci\214ed by separating the \214lename from the message\
+ with a `?'.)-2.62 F(When used in the te)144 720 Q(xt of the message,)
+-.15 E F1($_)2.5 E F0 -.15(ex)2.5 G
+(pands to the name of the current mail\214le.).15 E(Example:)5 E
+(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(17)190.395 E 0 Cg EP
+%%Page: 18 18
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(MAILP)144 84 Q -.95(AT)-.74 G(H).95 E F0(=\010/v)A(ar/mail/bfox?"Y)
+-.25 E(ou ha)-1.1 E .3 -.15(ve m)-.2 H
+(ail":~/shell\255mail?"$_ has mail!"\010).15 E F1(Bash)144 96 Q F0 .015
+(can be con\214gured to supply a def)2.515 F .015(ault v)-.1 F .015
+(alue for this v)-.25 F .015(ariable \(there is no v)-.25 F .015
+(alue by def)-.25 F .015(ault\), b)-.1 F(ut)-.2 E(the location of the u\
+ser mail \214les that it uses is system dependent \(e.g., /v)144 108 Q
+(ar/mail/)-.25 E F1($USER)A F0(\).)A F1(OPTERR)108 120 Q F0 .39
+(If set to the v)144 132 R .39(alue 1,)-.25 F F1(bash)2.89 E F0 .389
+(displays error messages generated by the)2.889 F F1(getopts)2.889 E F0
+-.2(bu)2.889 G .389(iltin command \(see).2 F/F2 9/Times-Bold@0 SF .359
+(SHELL B)144 144 R(UIL)-.09 E .359(TIN COMMANDS)-.828 F F0(belo)2.609 E
+(w\).)-.25 E F2(OPTERR)5.359 E F0 .36
+(is initialized to 1 each time the shell is in)2.609 F -.2(vo)-.4 G -.1
+(ke).2 G(d).1 E(or a shell script is e)144 156 Q -.15(xe)-.15 G(cuted.)
+.15 E F1 -.74(PA)108 168 S(TH)-.21 E F0 .588
+(The search path for commands.)144 168 R .587
+(It is a colon-separated list of directories in which the shell looks)
+5.588 F .471(for commands \(see)144 180 R F2 .471(COMMAND EXECUTION)
+2.971 F F0(belo)2.722 E 2.972(w\). A)-.25 F .472
+(zero-length \(null\) directory name in the)2.972 F -.25(va)144 192 S
+.536(lue of).25 F F2 -.666(PA)3.036 G(TH)-.189 E F0 .535
+(indicates the current directory)2.786 F 5.535(.A)-.65 G .535
+(null directory name may appear as tw)-2.5 F 3.035(oa)-.1 G(djacent)
+-3.035 E .867(colons, or as an initial or trailing colon.)144 204 R .868
+(The def)5.868 F .868(ault path is system-dependent, and is set by the)
+-.1 F(administrator who installs)144 216 Q F1(bash)2.5 E F0 5(.A)C
+(common v)-2.5 E(alue is)-.25 E/F3 10/Courier@0 SF
+(/usr/local/bin:/usr/lo-)2.5 E(cal/sbin:/usr/bin:/usr/sbin:/bin:/sbin)
+144 228 Q F0(.)A F1(POSIXL)108 240 Q(Y_CORRECT)-.92 E F0 .471(If this v)
+144 252 R .471(ariable is in the en)-.25 F .471(vironment when)-.4 F F1
+(bash)2.971 E F0 .471(starts, the shell enters)2.971 F/F4 10
+/Times-Italic@0 SF .472(posix mode)2.972 F F0 .472(before reading)2.972
+F .011(the startup \214les, as if the)144 264 R F1(\255\255posix)2.511 E
+F0(in)2.511 E -.2(vo)-.4 G .011(cation option had been supplied.).2 F
+.011(If it is set while the shell is)5.011 F(running,)144 276 Q F1(bash)
+4.497 E F0(enables)4.497 E F4 1.997(posix mode)4.497 F F0 4.497(,a)C
+4.497(si)-4.497 G 4.497(ft)-4.497 G 1.997(he command)-4.497 F F3 1.997
+(set -o posix)4.497 F F0 1.998(had been e)4.497 F -.15(xe)-.15 G(cuted.)
+.15 E(When the shell enters)144 288 Q F4(posix mode)2.5 E F0 2.5(,i)C
+2.5(ts)-2.5 G(ets this v)-2.5 E(ariable if it w)-.25 E
+(as not already set.)-.1 E F1(PR)108 300 Q(OMPT_COMMAND)-.3 E F0 .155
+(If this v)144 312 R .155(ariable is set, and is an array)-.25 F 2.655
+(,t)-.65 G .155(he v)-2.655 F .155(alue of each set element is e)-.25 F
+-.15(xe)-.15 G .155(cuted as a command prior).15 F .407
+(to issuing each primary prompt.)144 324 R .407(If this is set b)5.407 F
+.407(ut not an array v)-.2 F .407(ariable, its v)-.25 F .407
+(alue is used as a com-)-.25 F(mand to e)144 336 Q -.15(xe)-.15 G
+(cute instead.).15 E F1(PR)108 348 Q(OMPT_DIR)-.3 E(TRIM)-.4 E F0 .676
+(If set to a number greater than zero, the v)144 360 R .676
+(alue is used as the number of trailing directory compo-)-.25 F .923
+(nents to retain when e)144 372 R .923(xpanding the)-.15 F F1(\\w)3.423
+E F0(and)3.423 E F1(\\W)3.423 E F0 .923(prompt string escapes \(see)
+3.423 F F2(PR)3.423 E(OMPTING)-.27 E F0(belo)3.173 E(w\).)-.25 E
+(Characters remo)144 384 Q -.15(ve)-.15 G 2.5(da).15 G
+(re replaced with an ellipsis.)-2.5 E F1(PS0)108 396 Q F0 1.174(The v)
+144 396 R 1.174(alue of this parameter is e)-.25 F 1.174(xpanded \(see)
+-.15 F F2(PR)3.674 E(OMPTING)-.27 E F0(belo)3.424 E 1.174
+(w\) and displayed by interacti)-.25 F -.15(ve)-.25 G
+(shells after reading a command and before the command is e)144 408 Q
+-.15(xe)-.15 G(cuted.).15 E F1(PS1)108 420 Q F0 .064(The v)144 420 R
+.065(alue of this parameter is e)-.25 F .065(xpanded \(see)-.15 F F2(PR)
+2.565 E(OMPTING)-.27 E F0(belo)2.315 E .065
+(w\) and used as the primary prompt)-.25 F 2.5(string. The)144 432 R
+(def)2.5 E(ault v)-.1 E(alue is `)-.25 E(`)-.74 E F1(\\s\255\\v\\$)A F0
+-.74('')2.5 G(.).74 E F1(PS2)108 444 Q F0 .118(The v)144 444 R .118
+(alue of this parameter is e)-.25 F .118(xpanded as with)-.15 F F2(PS1)
+2.617 E F0 .117(and used as the secondary prompt string.)2.367 F(The)
+5.117 E(def)144 456 Q(ault is `)-.1 E(`)-.74 E F1(>)A F0 -.74('')2.5 G
+(.).74 E F1(PS3)108 468 Q F0 1.115(The v)144 468 R 1.115
+(alue of this parameter is used as the prompt for the)-.25 F F1(select)
+3.615 E F0 1.116(command \(see)3.616 F F2 1.116(SHELL GRAM-)3.616 F(MAR)
+144 480 Q F0(abo)2.25 E -.15(ve)-.15 G(\).).15 E F1(PS4)108 492 Q F0
+.101(The v)144 492 R .101(alue of this parameter is e)-.25 F .101
+(xpanded as with)-.15 F F2(PS1)2.6 E F0 .1(and the v)2.35 F .1
+(alue is printed before each command)-.25 F F1(bash)144 504 Q F0 .334
+(displays during an e)2.834 F -.15(xe)-.15 G .335(cution trace.).15 F
+.335(The \214rst character of the e)5.335 F .335(xpanded v)-.15 F .335
+(alue of)-.25 F F2(PS4)2.835 E F0 .335(is repli-)2.585 F
+(cated multiple times, as necessary)144 516 Q 2.5(,t)-.65 G 2.5(oi)-2.5
+G(ndicate multiple le)-2.5 E -.15(ve)-.25 G(ls of indirection.).15 E
+(The def)5 E(ault is `)-.1 E(`)-.74 E F1(+)A F0 -.74('')2.5 G(.).74 E F1
+(SHELL)108 528 Q F0 .543(This v)144 540 R .543(ariable e)-.25 F .543
+(xpands to the full pathname to the shell.)-.15 F .542
+(If it is not set when the shell starts,)5.543 F F1(bash)3.042 E F0
+(assigns to it the full pathname of the current user')144 552 Q 2.5(sl)
+-.55 G(ogin shell.)-2.5 E F1(TIMEFORMA)108 564 Q(T)-.95 E F0 .826(The v)
+144 576 R .826
+(alue of this parameter is used as a format string specifying ho)-.25 F
+3.327(wt)-.25 G .827(he timing information for)-3.327 F .649
+(pipelines pre\214x)144 588 R .649(ed with the)-.15 F F1(time)3.149 E F0
+(reserv)3.149 E .649(ed w)-.15 F .648(ord should be displayed.)-.1 F
+(The)5.648 E F1(%)3.148 E F0 .648(character introduces)3.148 F .711
+(an escape sequence that is e)144 600 R .711(xpanded to a time v)-.15 F
+.712(alue or other information.)-.25 F .712(The escape sequences)5.712 F
+(and their meanings are as follo)144 612 Q
+(ws; the braces denote optional portions.)-.25 E F1(%%)144 630 Q F0 2.5
+(Al)194 630 S(iteral)-2.5 E F1(%)2.5 E F0(.)A F1(%[)144 642 Q F4(p)A F1
+(][l]R)A F0(The elapsed time in seconds.)194 642 Q F1(%[)144 654 Q F4(p)
+A F1(][l]U)A F0(The number of CPU seconds spent in user mode.)194 654 Q
+F1(%[)144 666 Q F4(p)A F1(][l]S)A F0
+(The number of CPU seconds spent in system mode.)194 666 Q F1(%P)144 678
+Q F0(The CPU percentage, computed as \(%U + %S\) / %R.)194 678 Q .87
+(The optional)144 694.8 R F4(p)3.37 E F0 .87(is a digit specifying the)
+3.37 F F4(pr)3.37 E(ecision)-.37 E F0 3.37(,t)C .87
+(he number of fractional digits after a decimal)-3.37 F 2.525(point. A)
+144 706.8 R -.25(va)2.525 G .025
+(lue of 0 causes no decimal point or fraction to be output.).25 F .026
+(At most three places after the)5.025 F .538
+(decimal point may be speci\214ed; v)144 718.8 R .538(alues of)-.25 F F4
+(p)3.038 E F0 .537(greater than 3 are changed to 3.)3.037 F(If)5.537 E
+F4(p)3.037 E F0 .537(is not speci\214ed,)3.037 F(the v)144 730.8 Q
+(alue 3 is used.)-.25 E(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E
+(18)190.395 E 0 Cg EP
+%%Page: 19 19
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E .667(The optional)
+144 84 R/F1 10/Times-Bold@0 SF(l)3.167 E F0 .668
+(speci\214es a longer format, including minutes, of the form)3.168 F/F2
+10/Times-Italic@0 SF(MM)3.168 E F0(m)A F2(SS)A F0(.)A F2(FF)A F0 3.168
+(s. The)B -.25(va)3.168 G(lue).25 E(of)144 96 Q F2(p)2.5 E F0
+(determines whether or not the fraction is included.)2.5 E 13.365
+(If this v)144 112.8 R 13.365(ariable is not set,)-.25 F F1(bash)15.865
+E F0 13.364(acts as if it had the v)15.865 F(alue)-.25 E F1($\010\\nr)
+144 124.8 Q(eal\\t%3lR\\nuser\\t%3lU\\nsys\\t%3lS\010)-.18 E F0 7.113
+(.I)C 4.613(ft)-7.113 G 2.113(he v)-4.613 F 2.113
+(alue is null, no timing information is dis-)-.25 F 2.5(played. A)144
+136.8 R(trailing ne)2.5 E
+(wline is added when the format string is displayed.)-.25 E F1(TMOUT)108
+148.8 Q F0 .941(If set to a v)144 160.8 R .941(alue greater than zero,)
+-.25 F/F3 9/Times-Bold@0 SF(TMOUT)3.441 E F0 .941(is treated as the def)
+3.191 F .941(ault timeout for the)-.1 F F1 -.18(re)3.441 G(ad).18 E F0
+-.2(bu)3.441 G(iltin.).2 E(The)144 172.8 Q F1(select)2.81 E F0 .31
+(command terminates if input does not arri)2.81 F .611 -.15(ve a)-.25 H
+(fter).15 E F3(TMOUT)2.811 E F0 .311(seconds when input is com-)2.561 F
+.886(ing from a terminal.)144 184.8 R .886(In an interacti)5.886 F 1.185
+-.15(ve s)-.25 H .885(hell, the v).15 F .885
+(alue is interpreted as the number of seconds to)-.25 F -.1(wa)144 196.8
+S 1.05(it for a line of input after issuing the primary prompt.).1 F F1
+(Bash)6.05 E F0 1.05(terminates after w)3.55 F 1.05(aiting for that)-.1
+F(number of seconds if a complete line of input does not arri)144 208.8
+Q -.15(ve)-.25 G(.).15 E F1(TMPDIR)108 220.8 Q F0 .391(If set,)144 232.8
+R F1(bash)2.891 E F0 .391(uses its v)2.891 F .391
+(alue as the name of a directory in which)-.25 F F1(bash)2.89 E F0 .39
+(creates temporary \214les for the)2.89 F(shell')144 244.8 Q 2.5(su)-.55
+G(se.)-2.5 E F1(auto_r)108 256.8 Q(esume)-.18 E F0 .53(This v)144 268.8
+R .53(ariable controls ho)-.25 F 3.03(wt)-.25 G .531
+(he shell interacts with the user and job control.)-3.03 F .531
+(If this v)5.531 F .531(ariable is set,)-.25 F .539(single w)144 280.8 R
+.538(ord simple commands without redirections are treated as candidates\
+ for resumption of an)-.1 F -.15(ex)144 292.8 S .366(isting stopped job)
+.15 F 5.366(.T)-.4 G .366(here is no ambiguity allo)-5.366 F .366
+(wed; if there is more than one job be)-.25 F .367(ginning with)-.15 F
+1.125(the string typed, the job most recently accessed is selected.)144
+304.8 R(The)6.125 E F2(name)3.985 E F0 1.124(of a stopped job, in this)
+3.805 F(conte)144 316.8 Q 1.132
+(xt, is the command line used to start it.)-.15 F 1.133(If set to the v)
+6.133 F(alue)-.25 E F2 -.2(ex)3.633 G(act).2 E F0 3.633(,t).68 G 1.133
+(he string supplied must)-3.633 F .606
+(match the name of a stopped job e)144 328.8 R .606(xactly; if set to)
+-.15 F F2(substring)3.445 E F0 3.105(,t).22 G .605
+(he string supplied needs to match a)-3.105 F .884
+(substring of the name of a stopped job)144 340.8 R 5.884(.T)-.4 G(he)
+-5.884 E F2(substring)3.724 E F0 -.25(va)3.604 G .885(lue pro).25 F .885
+(vides functionality analogous to)-.15 F(the)144 352.8 Q F1(%?)3.334 E
+F0 .834(job identi\214er \(see)5.834 F F3 .834(JOB CONTR)3.334 F(OL)-.27
+E F0(belo)3.084 E 3.334(w\). If)-.25 F .834(set to an)3.334 F 3.334(yo)
+-.15 G .834(ther v)-3.334 F .833(alue, the supplied string)-.25 F .315
+(must be a pre\214x of a stopped job')144 364.8 R 2.816(sn)-.55 G .316
+(ame; this pro)-2.816 F .316(vides functionality analogous to the)-.15 F
+F1(%)2.816 E F2(string)A F0(job)2.816 E(identi\214er)144 376.8 Q(.)-.55
+E F1(histchars)108 388.8 Q F0 .546(The tw)144 400.8 R 3.046(oo)-.1 G
+3.046(rt)-3.046 G .546(hree characters which control history e)-3.046 F
+.545(xpansion and tok)-.15 F .545(enization \(see)-.1 F F3(HIST)3.045 E
+(OR)-.162 E 2.795(YE)-.315 G(X-)-2.795 E -.666(PA)144 412.8 S(NSION).666
+E F0(belo)2.987 E 3.237(w\). The)-.25 F .737(\214rst character is the)
+3.237 F F2 .737(history e)3.237 F(xpansion)-.2 E F0(character)3.238 E
+3.238(,t)-.4 G .738(he character which sig-)-3.238 F .761
+(nals the start of a history e)144 424.8 R .761(xpansion, normally `)
+-.15 F F1(!)A F0 3.261('. The)B .76(second character is the)3.261 F F2
+(quic)3.26 E 3.26(ks)-.2 G(ubstitution)-3.26 E F0(character)144 436.8 Q
+3.476(,w)-.4 G .977(hich is used as shorthand for re-running the pre)
+-3.476 F .977(vious command entered, substituting)-.25 F .131
+(one string for another in the command.)144 448.8 R .131(The def)5.131 F
+.131(ault is `)-.1 F F1(^)A F0 2.63('. The)B .13
+(optional third character is the char)2.63 F(-)-.2 E .276(acter which i\
+ndicates that the remainder of the line is a comment when found as the \
+\214rst character)144 460.8 R .46(of a w)144 472.8 R .46
+(ord, normally `)-.1 F F1(#)A F0 2.959('. The)B .459
+(history comment character causes history substitution to be skipped)
+2.959 F .466(for the remaining w)144 484.8 R .466(ords on the line.)-.1
+F .467(It does not necessarily cause the shell parser to treat the rest)
+5.467 F(of the line as a comment.)144 496.8 Q F1(Arrays)87 513.6 Q(Bash)
+108 525.6 Q F0(pro)3.391 E .891(vides one-dimensional inde)-.15 F -.15
+(xe)-.15 G 3.391(da).15 G .891(nd associati)-3.391 F 1.191 -.15(ve a)
+-.25 H .891(rray v).15 F 3.391(ariables. An)-.25 F 3.391(yv)-.15 G .89
+(ariable may be used as an)-3.641 F(inde)108 537.6 Q -.15(xe)-.15 G
+2.573(da).15 G .073(rray; the)-2.573 F F1(declar)2.573 E(e)-.18 E F0 -.2
+(bu)2.573 G .073(iltin will e).2 F .073(xplicitly declare an array)-.15
+F 5.073(.T)-.65 G .074(here is no maximum limit on the size of)-5.073 F
+.329(an array)108 549.6 R 2.829(,n)-.65 G .329(or an)-2.829 F 2.829(yr)
+-.15 G .329(equirement that members be inde)-2.829 F -.15(xe)-.15 G
+2.829(do).15 G 2.829(ra)-2.829 G .328(ssigned contiguously)-2.829 F
+5.328(.I)-.65 G(nde)-5.328 E -.15(xe)-.15 G 2.828(da).15 G .328
+(rrays are refer)-2.828 F(-)-.2 E 1.595(enced using inte)108 561.6 R
+1.595(gers \(including arithmetic e)-.15 F 1.595
+(xpressions\) and are zero-based; associati)-.15 F 1.895 -.15(ve a)-.25
+H 1.595(rrays are refer).15 F(-)-.2 E(enced using arbitrary strings.)108
+573.6 Q(Unless otherwise noted, inde)5 E -.15(xe)-.15 G 2.5(da).15 G
+(rray indices must be non-ne)-2.5 E -.05(ga)-.15 G(ti).05 E .3 -.15
+(ve i)-.25 H(nte).15 E(gers.)-.15 E 2.463(An inde)108 590.4 R -.15(xe)
+-.15 G 4.963(da).15 G 2.463(rray is created automatically if an)-4.963 F
+4.963(yv)-.15 G 2.462(ariable is assigned to using the syntax)-5.213 F
+F2(name)4.962 E F0([)A F2(sub-)A(script)108 602.4 Q F0(]=)A F2(value)A
+F0 5.506(.T)C(he)-5.506 E F2(subscript)3.346 E F0 .507
+(is treated as an arithmetic e)3.687 F .507(xpression that must e)-.15 F
+-.25(va)-.25 G .507(luate to a number).25 F 5.507(.T)-.55 G 3.007(oe)
+-6.307 G(x-)-3.157 E 1.193(plicitly declare an inde)108 614.4 R -.15(xe)
+-.15 G 3.693(da).15 G(rray)-3.693 E 3.693(,u)-.65 G(se)-3.693 E F1
+(declar)3.693 E 3.693<65ad>-.18 G(a)-3.693 E F2(name)3.693 E F0(\(see)
+3.692 E F3 1.192(SHELL B)3.692 F(UIL)-.09 E 1.192(TIN COMMANDS)-.828 F
+F0(belo)3.442 E(w\).)-.25 E F1(de-)6.192 E(clar)108 626.4 Q 2.5<65ad>
+-.18 G(a)-2.5 E F2(name)2.5 E F1([)A F2(subscript)A F1(])A F0
+(is also accepted; the)2.5 E F2(subscript)2.5 E F0(is ignored.)2.5 E
+(Associati)108 643.2 Q .3 -.15(ve a)-.25 H(rrays are created using).15 E
+F1(declar)2.5 E 2.5<65ad>-.18 G(A)-2.5 E F2(name)2.5 E F0(.)A(Attrib)108
+660 Q .94(utes may be speci\214ed for an array v)-.2 F .941
+(ariable using the)-.25 F F1(declar)3.441 E(e)-.18 E F0(and)3.441 E F1
+-.18(re)3.441 G(adonly).18 E F0 -.2(bu)3.441 G 3.441(iltins. Each).2 F
+(attrib)3.441 E(ute)-.2 E(applies to all members of an array)108 672 Q
+(.)-.65 E 1.647
+(Arrays are assigned to using compound assignments of the form)108 688.8
+R F2(name)4.147 E F0(=)A F1(\()A F0 -.25(va)C(lue).25 E F2(1)A F0 1.647
+(... v)4.147 F(alue)-.25 E F2(n)A F1(\))A F0 4.147(,w)C 1.647(here each)
+-4.147 F F2(value)108 700.8 Q F0 .211(may be of the form [)2.711 F F2
+(subscript)A F0(]=)A F2(string)A F0 5.211(.I)C(nde)-5.211 E -.15(xe)-.15
+G 2.711(da).15 G .212(rray assignments do not require an)-2.711 F .212
+(ything b)-.15 F(ut)-.2 E F2(string)2.712 E F0(.)A(Each)108 712.8 Q F2
+(value)2.53 E F0 .029(in the list is e)2.529 F .029
+(xpanded using all the shell e)-.15 F .029(xpansions described belo)-.15
+F 2.529(wu)-.25 G(nder)-2.529 E F3(EXP)2.529 E(ANSION)-.666 E/F4 9
+/Times-Roman@0 SF(.)A F0(When)4.529 E .995(assigning to inde)108 724.8 R
+-.15(xe)-.15 G 3.495(da).15 G .995(rrays, if the optional brack)-3.495 F
+.996(ets and subscript are supplied, that inde)-.1 F 3.496(xi)-.15 G
+3.496(sa)-3.496 G .996(ssigned to;)-3.496 F(GNU Bash 5.1)72 768 Q
+(2020 October 29)141.235 E(19)190.395 E 0 Cg EP
+%%Page: 20 20
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E .417
+(otherwise the inde)108 84 R 2.917(xo)-.15 G 2.917(ft)-2.917 G .417
+(he element assigned is the last inde)-2.917 F 2.917(xa)-.15 G .416
+(ssigned to by the statement plus one.)-2.917 F(Inde)5.416 E(x-)-.15 E
+(ing starts at zero.)108 96 Q 1.288(When assigning to an associati)108
+112.8 R 1.588 -.15(ve a)-.25 H(rray).15 E 3.788(,t)-.65 G 1.288(he w)
+-3.788 F 1.288(ords in a compound assignment may be either assignment)
+-.1 F .608
+(statements, for which the subscript is required, or a list of w)108
+124.8 R .608(ords that is interpreted as a sequence of alter)-.1 F(-)-.2
+E 1.956(nating k)108 136.8 R -.15(ey)-.1 G 4.456(sa).15 G 1.956(nd v)
+-4.456 F(alues:)-.25 E/F1 10/Times-Italic@0 SF(name)4.456 E F0(=)A/F2 10
+/Times-Bold@0 SF(\()A F1 -.1(ke)4.456 G 1.957(y1 value1 k)-.2 F -.3(ey)
+-.1 G 4.457(2v).3 G(alue2)-4.457 E F0(...)4.457 E F2(\))A F0 6.957(.T)C
+1.957(hese are treated identically to)-6.957 F F1(name)4.457 E F0(=)A F2
+(\()A F0([)108 148.8 Q F1 -.1(ke)C(y1)-.2 E F0(]=)A F1(value1)A F0([)
+3.133 E F1 -.1(ke)C(y2)-.2 E F0(]=)A F1(value2)A F0(...)3.133 E F2(\))A
+F0 5.633(.T)C .633(he \214rst w)-5.633 F .633
+(ord in the list determines ho)-.1 F 3.132(wt)-.25 G .632
+(he remaining w)-3.132 F .632(ords are inter)-.1 F(-)-.2 E .153
+(preted; all assignments in a list must be of the same type.)108 160.8 R
+.154(When using k)5.154 F -.15(ey)-.1 G(/v).15 E .154(alue pairs, the k)
+-.25 F -.15(ey)-.1 G 2.654(sm).15 G .154(ay not be)-2.654 F
+(missing or empty; a \214nal missing v)108 172.8 Q(alue is treated lik)
+-.25 E 2.5(et)-.1 G(he empty string.)-2.5 E .24
+(This syntax is also accepted by the)108 189.6 R F2(declar)2.74 E(e)-.18
+E F0 -.2(bu)2.739 G 2.739(iltin. Indi).2 F .239
+(vidual array elements may be assigned to using the)-.25 F F1(name)108
+201.6 Q F0([)A F1(subscript)A F0(]=)A F1(value)A F0 1.917
+(syntax introduced abo)4.416 F -.15(ve)-.15 G 6.917(.W).15 G 1.917
+(hen assigning to an inde)-6.917 F -.15(xe)-.15 G 4.417(da).15 G(rray)
+-4.417 E 4.417(,i)-.65 G(f)-4.417 E F1(name)4.777 E F0 1.917(is sub-)
+4.597 F .116(scripted by a ne)108 213.6 R -.05(ga)-.15 G(ti).05 E .416
+-.15(ve n)-.25 H(umber).15 E 2.616(,t)-.4 G .115
+(hat number is interpreted as relati)-2.616 F .415 -.15(ve t)-.25 H
+2.615(oo).15 G .115(ne greater than the maximum inde)-2.615 F(x)-.15 E
+(of)108 225.6 Q F1(name)2.676 E F0 2.676(,s)C 2.676(on)-2.676 G -2.25
+-.15(eg a)-2.676 H(ti).15 E .476 -.15(ve i)-.25 H .177
+(ndices count back from the end of the array).15 F 2.677(,a)-.65 G .177
+(nd an inde)-2.677 F 2.677(xo)-.15 G 2.677<66ad>-2.677 G 2.677(1r)-2.677
+G .177(eferences the last el-)-2.677 F(ement.)108 237.6 Q(An)108 254.4 Q
+3.576(ye)-.15 G 1.076(lement of an array may be referenced using ${)
+-3.576 F F1(name)A F0([)A F1(subscript)A F0 3.575(]}. The)B 1.075
+(braces are required to a)3.575 F -.2(vo)-.2 G(id).2 E 1.541
+(con\215icts with pathname e)108 266.4 R 4.041(xpansion. If)-.15 F F1
+(subscript)4.041 E F0(is)4.041 E F2(@)4.041 E F0(or)4.041 E F2(*)4.041 E
+F0 4.041(,t)C 1.541(he w)-4.041 F 1.541(ord e)-.1 F 1.541
+(xpands to all members of)-.15 F F1(name)4.042 E F0(.)A 1.057
+(These subscripts dif)108 278.4 R 1.057(fer only when the w)-.25 F 1.057
+(ord appears within double quotes.)-.1 F 1.056(If the w)6.056 F 1.056
+(ord is double-quoted,)-.1 F(${)108 290.4 Q F1(name)A F0 .52([*]} e)B
+.52(xpands to a single w)-.15 F .52(ord with the v)-.1 F .521
+(alue of each array member separated by the \214rst character)-.25 F
+1.375(of the)108 302.4 R/F3 9/Times-Bold@0 SF(IFS)3.875 E F0 1.375
+(special v)3.625 F 1.375(ariable, and ${)-.25 F F1(name)A F0 1.375
+([@]} e)B 1.375(xpands each element of)-.15 F F1(name)3.875 E F0 1.374
+(to a separate w)3.875 F 3.874(ord. When)-.1 F 2.027
+(there are no array members, ${)108 314.4 R F1(name)A F0 2.028([@]} e)B
+2.028(xpands to nothing.)-.15 F 2.028(If the double-quoted e)7.028 F
+2.028(xpansion occurs)-.15 F .759(within a w)108 326.4 R .759
+(ord, the e)-.1 F .759
+(xpansion of the \214rst parameter is joined with the be)-.15 F .759
+(ginning part of the original w)-.15 F(ord,)-.1 E .515(and the e)108
+338.4 R .516(xpansion of the last parameter is joined with the last par\
+t of the original w)-.15 F 3.016(ord. This)-.1 F .516(is analogous)3.016
+F .228(to the e)108 350.4 R .228(xpansion of the special parameters)-.15
+F F2(*)2.728 E F0(and)2.728 E F2(@)2.728 E F0(\(see)2.728 E F2 .228
+(Special P)2.728 F(arameters)-.1 E F0(abo)2.727 E -.15(ve)-.15 G 2.727
+(\). ${#).15 F F1(name)A F0([)A F1(subscript)A F0(]})A -.15(ex)108 362.4
+S .886(pands to the length of ${).15 F F1(name)A F0([)A F1(subscript)A
+F0 3.386(]}. If)B F1(subscript)3.386 E F0(is)3.386 E F2(*)3.386 E F0(or)
+3.386 E F2(@)3.386 E F0 3.386(,t)C .886(he e)-3.386 F .886
+(xpansion is the number of ele-)-.15 F .295(ments in the array)108 374.4
+R 5.295(.I)-.65 G 2.795(ft)-5.295 G(he)-2.795 E F1(subscript)3.135 E F0
+.295(used to reference an element of an inde)3.475 F -.15(xe)-.15 G
+2.794(da).15 G .294(rray e)-2.794 F -.25(va)-.25 G .294
+(luates to a number).25 F .628
+(less than zero, it is interpreted as relati)108 386.4 R .928 -.15(ve t)
+-.25 H 3.128(oo).15 G .629(ne greater than the maximum inde)-3.128 F
+3.129(xo)-.15 G 3.129(ft)-3.129 G .629(he array)-3.129 F 3.129(,s)-.65 G
+3.129(on)-3.129 G -2.25 -.15(eg a)-3.129 H(ti).15 E -.15(ve)-.25 G
+(indices count back from the end of the array)108 398.4 Q 2.5(,a)-.65 G
+(nd an inde)-2.5 E 2.5(xo)-.15 G 2.5<66ad>-2.5 G 2.5(1r)-2.5 G
+(eferences the last element.)-2.5 E .595(Referencing an array v)108
+415.2 R .595(ariable without a subscript is equi)-.25 F -.25(va)-.25 G
+.595(lent to referencing the array with a subscript of).25 F 2.5(0. An)
+108 427.2 R 2.5(yr)-.15 G(eference to a v)-2.5 E(ariable using a v)-.25
+E(alid subscript is le)-.25 E -.05(ga)-.15 G(l, and).05 E F2(bash)2.5 E
+F0(will create an array if necessary)2.5 E(.)-.65 E(An array v)108 444 Q
+(ariable is considered set if a subscript has been assigned a v)-.25 E
+2.5(alue. The)-.25 F(null string is a v)2.5 E(alid v)-.25 E(alue.)-.25 E
+.417(It is possible to obtain the k)108 460.8 R -.15(ey)-.1 G 2.918(s\()
+.15 G .418(indices\) of an array as well as the v)-2.918 F 2.918
+(alues. ${)-.25 F F2(!)A F1(name)A F0([)A F1(@)A F0 .418(]} and ${)B F2
+(!)A F1(name)A F0([)A F1(*)A F0(]})A -.15(ex)108 472.8 S .75
+(pand to the indices assigned in array v).15 F(ariable)-.25 E F1(name)
+3.249 E F0 5.749(.T)C .749
+(he treatment when in double quotes is similar to)-5.749 F(the e)108
+484.8 Q(xpansion of the special parameters)-.15 E F1(@)2.5 E F0(and)2.5
+E F1(*)2.5 E F0(within double quotes.)2.5 E(The)108 501.6 Q F2(unset)
+2.766 E F0 -.2(bu)2.766 G .267(iltin is used to destro).2 F 2.767(ya)-.1
+G(rrays.)-2.767 E F2(unset)5.267 E F1(name)2.767 E F0([)A F1(subscript)A
+F0 2.767(]d)C(estro)-2.767 E .267(ys the array element at inde)-.1 F(x)
+-.15 E F1(sub-)2.767 E(script)108 513.6 Q F0 2.858(,f)C .358
+(or both inde)-2.858 F -.15(xe)-.15 G 2.858(da).15 G .358(nd associati)
+-2.858 F .658 -.15(ve a)-.25 H 2.858(rrays. Ne).15 F -.05(ga)-.15 G(ti)
+.05 E .658 -.15(ve s)-.25 H .358(ubscripts to inde).15 F -.15(xe)-.15 G
+2.858(da).15 G .358(rrays are interpreted as de-)-2.858 F 1.204
+(scribed abo)108 525.6 R -.15(ve)-.15 G 6.204(.U).15 G 1.204
+(nsetting the last element of an array v)-6.204 F 1.205
+(ariable does not unset the v)-.25 F(ariable.)-.25 E F2(unset)6.205 E F1
+(name)3.705 E F0(,)A(where)108 537.6 Q F1(name)2.5 E F0(is an array)2.5
+E 2.5(,o)-.65 G(r)-2.5 E F2(unset)2.5 E F1(name)2.5 E F0([)A F1
+(subscript)A F0(], where)A F1(subscript)2.5 E F0(is)2.5 E F2(*)2.5 E F0
+(or)2.5 E F2(@)2.5 E F0 2.5(,r)C(emo)-2.5 E -.15(ve)-.15 G 2.5(st).15 G
+(he entire array)-2.5 E(.)-.65 E .029(When using a v)108 554.4 R .029
+(ariable name with a subscript as an ar)-.25 F .028
+(gument to a command, such as with)-.18 F F2(unset)2.528 E F0 2.528(,w)C
+.028(ithout us-)-2.528 F .937(ing the w)108 566.4 R .937(ord e)-.1 F
+.937(xpansion syntax described abo)-.15 F -.15(ve)-.15 G 3.437(,t).15 G
+.937(he ar)-3.437 F .938(gument is subject to pathname e)-.18 F 3.438
+(xpansion. If)-.15 F(path-)3.438 E(name e)108 578.4 Q
+(xpansion is not desired, the ar)-.15 E(gument should be quoted.)-.18 E
+(The)108 595.2 Q F2(declar)2.684 E(e)-.18 E F0(,)A F2(local)2.684 E F0
+2.684(,a)C(nd)-2.684 E F2 -.18(re)2.684 G(adonly).18 E F0 -.2(bu)2.684 G
+.184(iltins each accept a).2 F F2<ad61>2.684 E F0 .184
+(option to specify an inde)2.684 F -.15(xe)-.15 G 2.683(da).15 G .183
+(rray and a)-2.683 F F2<ad41>2.683 E F0(op-)2.683 E .041
+(tion to specify an associati)108 607.2 R .341 -.15(ve a)-.25 H(rray).15
+E 5.041(.I)-.65 G 2.541(fb)-5.041 G .041(oth options are supplied,)
+-2.541 F F2<ad41>2.541 E F0(tak)2.541 E .041(es precedence.)-.1 F(The)
+5.041 E F2 -.18(re)2.542 G(ad).18 E F0 -.2(bu)2.542 G .042(iltin ac-).2
+F .864(cepts a)108 619.2 R F2<ad61>3.364 E F0 .864
+(option to assign a list of w)3.364 F .864
+(ords read from the standard input to an array)-.1 F 5.863(.T)-.65 G(he)
+-5.863 E F2(set)3.363 E F0(and)3.363 E F2(declar)3.363 E(e)-.18 E F0 -.2
+(bu)108 631.2 S(iltins display array v).2 E(alues in a w)-.25 E
+(ay that allo)-.1 E(ws them to be reused as assignments.)-.25 E/F4 10.95
+/Times-Bold@0 SF(EXP)72 648 Q(ANSION)-.81 E F0 .76(Expansion is perform\
+ed on the command line after it has been split into w)108 660 R 3.26
+(ords. There)-.1 F .76(are se)3.26 F -.15(ve)-.25 G 3.26(nk).15 G .76
+(inds of)-3.26 F -.15(ex)108 672 S .201(pansion performed:).15 F F1(br)
+2.971 E .201(ace e)-.15 F(xpansion)-.2 E F0(,).24 E F1 .201(tilde e)
+2.831 F(xpansion)-.2 E F0(,).24 E F1(par)3.951 E .201
+(ameter and variable e)-.15 F(xpansion)-.2 E F0(,).24 E F1 .2
+(command sub-)2.901 F(stitution)108 684 Q F0(,).24 E F1(arithmetic e)
+2.83 E(xpansion)-.2 E F0(,).24 E F1(wor)2.84 E 2.5(ds)-.37 G(plitting)
+-2.5 E F0 2.5(,a).22 G(nd)-2.5 E F1(pathname e)3.75 E(xpansion)-.2 E F0
+(.).24 E .418(The order of e)108 700.8 R .418(xpansions is: brace e)-.15
+F .418(xpansion; tilde e)-.15 F .419(xpansion, parameter and v)-.15 F
+.419(ariable e)-.25 F .419(xpansion, arithmetic)-.15 F -.15(ex)108 712.8
+S .196(pansion, and command substitution \(done in a left-to-right f).15
+F .195(ashion\); w)-.1 F .195(ord splitting; and pathname e)-.1 F(xpan-)
+-.15 E(sion.)108 724.8 Q(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E
+(20)190.395 E 0 Cg EP
+%%Page: 21 21
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E .257
+(On systems that can support it, there is an additional e)108 84 R .257
+(xpansion a)-.15 F -.25(va)-.2 G(ilable:).25 E/F1 10/Times-Italic@0 SF
+(pr)2.757 E .257(ocess substitution)-.45 F F0 5.257(.T)C .257
+(his is per)-5.257 F(-)-.2 E
+(formed at the same time as tilde, parameter)108 96 Q 2.5(,v)-.4 G
+(ariable, and arithmetic e)-2.75 E(xpansion and command substitution.)
+-.15 E .003(After these e)108 112.8 R .003
+(xpansions are performed, quote characters present in the original w)
+-.15 F .002(ord are remo)-.1 F -.15(ve)-.15 G 2.502(du).15 G .002
+(nless the)-2.502 F(y)-.15 E(ha)108 124.8 Q .3 -.15(ve b)-.2 H
+(een quoted themselv).15 E(es \()-.15 E F1(quote r)A(emo)-.37 E(val)-.1
+E F0(\).)A .171(Only brace e)108 141.6 R .171(xpansion, w)-.15 F .171
+(ord splitting, and pathname e)-.1 F .171
+(xpansion can increase the number of w)-.15 F .172(ords of the e)-.1 F
+(x-)-.15 E .777(pansion; other e)108 153.6 R .776(xpansions e)-.15 F
+.776(xpand a single w)-.15 F .776(ord to a single w)-.1 F 3.276
+(ord. The)-.1 F .776(only e)3.276 F .776(xceptions to this are the e)
+-.15 F(x-)-.15 E .695(pansions of ")108 165.6 R/F2 10/Times-Bold@0 SF
+($@)A F0 3.195("a)C .695(nd ")-3.195 F F2(${)A F1(name)A F2([@]})A F0
+.696(", and, in most cases,)B F2($*)3.196 E F0(and)3.196 E F2(${)3.196 E
+F1(name)A F2([*]})A F0 .696(as e)3.196 F .696(xplained abo)-.15 F .996
+-.15(ve \()-.15 H(see).15 E/F3 9/Times-Bold@0 SF -.666(PA)3.196 G(-).666
+E(RAMETERS)108 177.6 Q/F4 9/Times-Roman@0 SF(\).)A F2(Brace Expansion)87
+194.4 Q F1(Br)108.58 206.4 Q .606(ace e)-.15 F(xpansion)-.2 E F0 .606
+(is a mechanism by which arbitrary strings may be generated.)3.346 F
+.606(This mechanism is similar)5.606 F(to)108 218.4 Q F1 .415
+(pathname e)2.915 F(xpansion)-.2 E F0 2.915(,b)C .415
+(ut the \214lenames generated need not e)-3.115 F 2.915(xist. P)-.15 F
+.415(atterns to be brace e)-.15 F .415(xpanded tak)-.15 F 2.915(et)-.1 G
+(he)-2.915 E .074(form of an optional)108 230.4 R F1(pr)3.823 E(eamble)
+-.37 E F0 2.573(,f).18 G(ollo)-2.573 E .073
+(wed by either a series of comma-separated strings or a sequence e)-.25
+F(xpres-)-.15 E .489(sion between a pair of braces, follo)108 242.4 R
+.489(wed by an optional)-.25 F F1(postscript)4.239 E F0 5.49(.T).68 G
+.49(he preamble is pre\214x)-5.49 F .49(ed to each string)-.15 F .659(c\
+ontained within the braces, and the postscript is then appended to each\
+ resulting string, e)108 254.4 R .658(xpanding left to)-.15 F(right.)108
+266.4 Q .718(Brace e)108 283.2 R .719(xpansions may be nested.)-.15 F
+.719(The results of each e)5.719 F .719
+(xpanded string are not sorted; left to right order is)-.15 F(preserv)
+108 295.2 Q 2.5(ed. F)-.15 F(or e)-.15 E(xample, a)-.15 E F2({)A F0
+(d,c,b)A F2(})A F0 2.5(ee)C(xpands into `ade ace abe'.)-2.65 E 3.243(As)
+108 312 S .743(equence e)-3.243 F .743(xpression tak)-.15 F .743
+(es the form)-.1 F F2({)3.243 E F1(x)A F2(..)A F1(y)A F2([..)A F1(incr)A
+F2(]})A F0 3.243(,w)C(here)-3.243 E F1(x)3.243 E F0(and)3.242 E F1(y)
+3.242 E F0 .742(are either inte)3.242 F .742(gers or single characters,)
+-.15 F(and)108 324 Q F1(incr)3.031 E F0 3.031(,a)C 3.032(no)-3.031 G
+.532(ptional increment, is an inte)-3.032 F(ger)-.15 E 5.532(.W)-.55 G
+.532(hen inte)-5.532 F .532(gers are supplied, the e)-.15 F .532
+(xpression e)-.15 F .532(xpands to each)-.15 F .078(number between)108
+336 R F1(x)2.578 E F0(and)2.578 E F1(y)2.578 E F0 2.578(,i)C(nclusi)
+-2.578 E -.15(ve)-.25 G 5.078(.S).15 G .078(upplied inte)-5.078 F .077
+(gers may be pre\214x)-.15 F .077(ed with)-.15 F F1(0)2.577 E F0 .077
+(to force each term to ha)2.577 F .377 -.15(ve t)-.2 H(he).15 E .014
+(same width.)108 348 R .014(When either)5.014 F F1(x)2.514 E F0(or)2.514
+E F1(y)2.514 E F0(be)2.514 E .015(gins with a zero, the shell attempts \
+to force all generated terms to contain)-.15 F 1.143
+(the same number of digits, zero-padding where necessary)108 360 R 6.143
+(.W)-.65 G 1.143(hen characters are supplied, the e)-6.143 F(xpression)
+-.15 E -.15(ex)108 372 S 1.064(pands to each character le).15 F 1.064
+(xicographically between)-.15 F F1(x)3.564 E F0(and)3.564 E F1(y)3.564 E
+F0 3.564(,i)C(nclusi)-3.564 E -.15(ve)-.25 G 3.564(,u).15 G 1.064
+(sing the def)-3.564 F 1.064(ault C locale.)-.1 F(Note)6.064 E .245
+(that both)108 384 R F1(x)2.745 E F0(and)2.745 E F1(y)2.745 E F0 .245
+(must be of the same type.)2.745 F .244
+(When the increment is supplied, it is used as the dif)5.245 F .244
+(ference be-)-.25 F(tween each term.)108 396 Q(The def)5 E
+(ault increment is 1 or \2551 as appropriate.)-.1 E .581(Brace e)108
+412.8 R .581(xpansion is performed before an)-.15 F 3.081(yo)-.15 G .581
+(ther e)-3.081 F .581(xpansions, and an)-.15 F 3.082(yc)-.15 G .582
+(haracters special to other e)-3.082 F(xpansions)-.15 E .016
+(are preserv)108 424.8 R .016(ed in the result.)-.15 F .016
+(It is strictly te)5.016 F(xtual.)-.15 E F2(Bash)5.016 E F0 .015
+(does not apply an)2.516 F 2.515(ys)-.15 G .015
+(yntactic interpretation to the con-)-2.515 F(te)108 436.8 Q
+(xt of the e)-.15 E(xpansion or the te)-.15 E(xt between the braces.)
+-.15 E 2.501(Ac)108 453.6 S .001(orrectly-formed brace e)-2.501 F .001(\
+xpansion must contain unquoted opening and closing braces, and at least\
+ one un-)-.15 F .458(quoted comma or a v)108 465.6 R .458
+(alid sequence e)-.25 F 2.958(xpression. An)-.15 F 2.958(yi)-.15 G .458
+(ncorrectly formed brace e)-2.958 F .457(xpansion is left unchanged.)
+-.15 F(A)108 477.6 Q F2({)2.521 E F0(or)2.521 E F2(,)2.521 E F0 .021
+(may be quoted with a backslash to pre)2.521 F -.15(ve)-.25 G .022
+(nt its being considered part of a brace e).15 F 2.522(xpression. T)-.15
+F 2.522(oa)-.8 G -.2(vo)-2.722 G(id).2 E .172
+(con\215icts with parameter e)108 489.6 R .172(xpansion, the string)-.15
+F F2(${)2.672 E F0 .172(is not considered eligible for brace e)2.672 F
+.172(xpansion, and inhibits)-.15 F(brace e)108 501.6 Q
+(xpansion until the closing)-.15 E F2(})2.5 E F0(.)A 1.476(This constru\
+ct is typically used as shorthand when the common pre\214x of the strin\
+gs to be generated is)108 518.4 R(longer than in the abo)108 530.4 Q .3
+-.15(ve ex)-.15 H(ample:).15 E(mkdir /usr/local/src/bash/{old,ne)144
+547.2 Q -.65(w,)-.25 G(dist,b).65 E(ugs})-.2 E(or)108 559.2 Q(cho)144
+571.2 Q(wn root /usr/{ucb/{e)-.25 E(x,edit},lib/{e)-.15 E(x?.?*,ho)-.15
+E(w_e)-.25 E(x}})-.15 E .618(Brace e)108 588 R .618
+(xpansion introduces a slight incompatibility with historical v)-.15 F
+.618(ersions of)-.15 F F2(sh)3.118 E F0(.)A F2(sh)5.618 E F0 .618
+(does not treat open-)3.118 F .247
+(ing or closing braces specially when the)108 600 R 2.747(ya)-.15 G .247
+(ppear as part of a w)-2.747 F .248(ord, and preserv)-.1 F .248
+(es them in the output.)-.15 F F2(Bash)5.248 E F0(remo)108 612 Q -.15
+(ve)-.15 G 3.53(sb).15 G 1.03(races from w)-3.53 F 1.03
+(ords as a consequence of brace e)-.1 F 3.53(xpansion. F)-.15 F 1.03
+(or e)-.15 F 1.03(xample, a w)-.15 F 1.03(ord entered to)-.1 F F2(sh)
+3.53 E F0(as)3.53 E F1(\214le{1,2})108 624 Q F0 .514
+(appears identically in the output.)3.014 F .515(The same w)5.515 F .515
+(ord is output as)-.1 F F1 .515(\214le1 \214le2)4.925 F F0 .515(after e)
+3.035 F .515(xpansion by)-.15 F F2(bash)3.015 E F0(.)A .437
+(If strict compatibility with)108 636 R F2(sh)2.936 E F0 .436
+(is desired, start)2.936 F F2(bash)2.936 E F0 .436(with the)2.936 F F2
+(+B)2.936 E F0 .436(option or disable brace e)2.936 F .436
+(xpansion with the)-.15 F F2(+B)108 648 Q F0(option to the)2.5 E F2(set)
+2.5 E F0(command \(see)2.5 E F3(SHELL B)2.5 E(UIL)-.09 E(TIN COMMANDS)
+-.828 E F0(belo)2.25 E(w\).)-.25 E F2 -.18(Ti)87 664.8 S(lde Expansion)
+.18 E F0 1.086(If a w)108 676.8 R 1.086(ord be)-.1 F 1.086
+(gins with an unquoted tilde character \(`)-.15 F F2(~)A F0 1.087
+('\), all of the characters preceding the \214rst unquoted)B .185(slash\
+ \(or all characters, if there is no unquoted slash\) are considered a)
+108 688.8 R F1(tilde-pr)2.685 E(e\214x)-.37 E F0 5.185(.I)C 2.685(fn)
+-5.185 G .185(one of the characters)-2.685 F .725(in the tilde-pre\214x\
+ are quoted, the characters in the tilde-pre\214x follo)108 700.8 R .726
+(wing the tilde are treated as a possible)-.25 F F1(lo)108 712.8 Q .523
+(gin name)-.1 F F0 5.523(.I)C 3.023(ft)-5.523 G .523
+(his login name is the null string, the tilde is replaced with the v)
+-3.023 F .522(alue of the shell parameter)-.25 F F3(HOME)108 724.8 Q F4
+(.)A F0(If)6.735 E F3(HOME)4.735 E F0 2.236
+(is unset, the home directory of the user e)4.486 F -.15(xe)-.15 G 2.236
+(cuting the shell is substituted instead.).15 F(GNU Bash 5.1)72 768 Q
+(2020 October 29)141.235 E(21)190.395 E 0 Cg EP
+%%Page: 22 22
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E(Otherwise, the ti\
+lde-pre\214x is replaced with the home directory associated with the sp\
+eci\214ed login name.)108 84 Q .093
+(If the tilde-pre\214x is a `~+', the v)108 100.8 R .092
+(alue of the shell v)-.25 F(ariable)-.25 E/F1 9/Times-Bold@0 SF(PWD)
+2.592 E F0 .092(replaces the tilde-pre\214x.)2.342 F .092
+(If the tilde-pre\214x is)5.092 F 3.403(a`)108 112.8 S .903
+(~\255', the v)-3.403 F .903(alue of the shell v)-.25 F(ariable)-.25 E
+F1(OLDPWD)3.404 E/F2 9/Times-Roman@0 SF(,)A F0 .904
+(if it is set, is substituted.)3.154 F .904(If the characters follo)
+5.904 F .904(wing the)-.25 F .88
+(tilde in the tilde-pre\214x consist of a number)108 124.8 R/F3 10
+/Times-Italic@0 SF(N)3.38 E F0 3.38(,o)C .88(ptionally pre\214x)-3.38 F
+.879(ed by a `+' or a `\255', the tilde-pre\214x is re-)-.15 F .138(pla\
+ced with the corresponding element from the directory stack, as it w)108
+136.8 R .138(ould be displayed by the)-.1 F/F4 10/Times-Bold@0 SF(dirs)
+2.639 E F0 -.2(bu)2.639 G(iltin).2 E(in)108 148.8 Q -.2(vo)-.4 G -.1(ke)
+.2 G 2.839(dw).1 G .338(ith the tilde-pre\214x as an ar)-2.839 F 2.838
+(gument. If)-.18 F .338(the characters follo)2.838 F .338
+(wing the tilde in the tilde-pre\214x consist)-.25 F
+(of a number without a leading `+' or `\255', `+' is assumed.)108 160.8
+Q(If the login name is in)108 177.6 Q -.25(va)-.4 G(lid, or the tilde e)
+.25 E(xpansion f)-.15 E(ails, the w)-.1 E(ord is unchanged.)-.1 E .166
+(Each v)108 194.4 R .167(ariable assignment is check)-.25 F .167
+(ed for unquoted tilde-pre\214x)-.1 F .167(es immediately follo)-.15 F
+.167(wing a)-.25 F F4(:)2.667 E F0 .167(or the \214rst)2.667 F F4(=)
+2.667 E F0 5.167(.I)C(n)-5.167 E .468(these cases, tilde e)108 206.4 R
+.468(xpansion is also performed.)-.15 F(Consequently)5.467 E 2.967(,o)
+-.65 G .467(ne may use \214lenames with tildes in assign-)-2.967 F
+(ments to)108 218.4 Q F1 -.666(PA)2.5 G(TH)-.189 E F2(,)A F1(MAILP)2.25
+E -.855(AT)-.666 G(H).855 E F2(,)A F0(and)2.25 E F1(CDP)2.5 E -.855(AT)
+-.666 G(H).855 E F2(,)A F0(and the shell assigns the e)2.25 E(xpanded v)
+-.15 E(alue.)-.25 E .023(Bash also performs tilde e)108 235.2 R .023
+(xpansion on w)-.15 F .024(ords satisfying the conditions of v)-.1 F
+.024(ariable assignments \(as described)-.25 F(abo)108 247.2 Q .77 -.15
+(ve u)-.15 H(nder).15 E F1 -.666(PA)2.97 G(RAMETERS).666 E F2(\))A F0
+.47(when the)2.72 F 2.969(ya)-.15 G .469(ppear as ar)-2.969 F .469
+(guments to simple commands.)-.18 F .469(Bash does not do this,)5.469 F
+-.15(ex)108 259.2 S(cept for the).15 E F3(declar)2.5 E(ation)-.15 E F0
+(commands listed abo)2.5 E -.15(ve)-.15 G 2.5(,w).15 G(hen in)-2.5 E F3
+(posix mode)2.5 E F0(.)A F4 -.1(Pa)87 276 S(rameter Expansion).1 E F0
+.199(The `)108 288 R F4($)A F0 2.699('c)C .199
+(haracter introduces parameter e)-2.699 F .199
+(xpansion, command substitution, or arithmetic e)-.15 F 2.7
+(xpansion. The)-.15 F(pa-)2.7 E .314(rameter name or symbol to be e)108
+300 R .314(xpanded may be enclosed in braces, which are optional b)-.15
+F .314(ut serv)-.2 F 2.813(et)-.15 G 2.813(op)-2.813 G(rotect)-2.813 E
+.414(the v)108 312 R .414(ariable to be e)-.25 F .414
+(xpanded from characters immediately follo)-.15 F .415
+(wing it which could be interpreted as part of)-.25 F(the name.)108 324
+Q 1.19(When braces are used, the matching ending brace is the \214rst `)
+108 340.8 R F4(})A F0 3.689('n)C 1.189
+(ot escaped by a backslash or within a)-3.689 F .821
+(quoted string, and not within an embedded arithmetic e)108 352.8 R .822
+(xpansion, command substitution, or parameter e)-.15 F(x-)-.15 E
+(pansion.)108 364.8 Q(${)108 381.6 Q F3(par)A(ameter)-.15 E F0(})A .106
+(The v)144 393.6 R .106(alue of)-.25 F F3(par)2.606 E(ameter)-.15 E F0
+.106(is substituted.)2.606 F .106(The braces are required when)5.106 F
+F3(par)3.856 E(ameter)-.15 E F0 .106(is a positional pa-)3.336 F .11
+(rameter with more than one digit, or when)144 405.6 R F3(par)3.86 E
+(ameter)-.15 E F0 .111(is follo)3.341 F .111
+(wed by a character which is not to be)-.25 F .208
+(interpreted as part of its name.)144 417.6 R(The)5.208 E F3(par)2.708 E
+(ameter)-.15 E F0 .208(is a shell parameter as described abo)2.708 F
+-.15(ve)-.15 G F4 -.74(PA)2.858 G(RAME-).74 E(TERS)144 429.6 Q F0 2.5
+(\)o)C 2.5(ra)-2.5 G 2.5(na)-2.5 G(rray reference \()-2.5 E F4(Arrays)A
+F0(\).)A .346(If the \214rst character of)108 446.4 R F3(par)2.846 E
+(ameter)-.15 E F0 .346(is an e)2.846 F .346(xclamation point \()-.15 F
+F4(!)A F0 .346(\), and)B F3(par)2.846 E(ameter)-.15 E F0 .346(is not a)
+2.846 F F3(namer)2.846 E(ef)-.37 E F0 2.847(,i)C 2.847(ti)-2.847 G
+(ntroduces)-2.847 E 2.907(al)108 458.4 S -2.15 -.25(ev e)-2.907 H 2.907
+(lo).25 G 2.906(fi)-2.907 G(ndirection.)-2.906 E F4(Bash)5.406 E F0 .406
+(uses the v)2.906 F .406(alue formed by e)-.25 F .406
+(xpanding the rest of)-.15 F F3(par)2.906 E(ameter)-.15 E F0 .406
+(as the ne)2.906 F(w)-.25 E F3(par)2.906 E(ame-)-.15 E(ter)108 470.4 Q
+F0 2.578(;t)C .078(his is then e)-2.578 F .078(xpanded and that v)-.15 F
+.079(alue is used in the rest of the e)-.25 F .079
+(xpansion, rather than the e)-.15 F .079(xpansion of the)-.15 F
+(original)108 482.4 Q F3(par)2.543 E(ameter)-.15 E F0 5.043(.T)C .043
+(his is kno)-5.043 F .043(wn as)-.25 F F3(indir)2.543 E .043(ect e)-.37
+F(xpansion)-.2 E F0 5.043(.T)C .043(he v)-5.043 F .042
+(alue is subject to tilde e)-.25 F .042(xpansion, parameter)-.15 F -.15
+(ex)108 494.4 S .248(pansion, command substitution, and arithmetic e).15
+F 2.748(xpansion. If)-.15 F F3(par)2.749 E(ameter)-.15 E F0 .249
+(is a nameref, this e)2.749 F .249(xpands to the)-.15 F 1.51
+(name of the parameter referenced by)108 506.4 R F3(par)4.01 E(ameter)
+-.15 E F0 1.51(instead of performing the complete indirect e)4.01 F
+(xpansion.)-.15 E .387(The e)108 518.4 R .387
+(xceptions to this are the e)-.15 F .387(xpansions of ${)-.15 F F4(!)A
+F3(pr)A(e\214x)-.37 E F4(*)A F0 2.887(}a)C .387(nd ${)-2.887 F F4(!)A F3
+(name)A F0([)A F3(@)A F0 .387(]} described belo)B 4.188 -.65(w. T)-.25 H
+.388(he e).65 F(xclama-)-.15 E(tion point must immediately follo)108
+530.4 Q 2.5(wt)-.25 G(he left brace in order to introduce indirection.)
+-2.5 E .334(In each of the cases belo)108 547.2 R -.65(w,)-.25 G F3(wor)
+3.484 E(d)-.37 E F0 .334(is subject to tilde e)2.834 F .334
+(xpansion, parameter e)-.15 F .334(xpansion, command substitution,)-.15
+F(and arithmetic e)108 559.2 Q(xpansion.)-.15 E .066
+(When not performing substring e)108 576 R .067
+(xpansion, using the forms documented belo)-.15 F 2.567(w\()-.25 G
+(e.g.,)-2.567 E F4(:-)2.567 E F0(\),)A F4(bash)2.567 E F0 .067
+(tests for a pa-)2.567 F(rameter that is unset or null.)108 588 Q(Omitt\
+ing the colon results in a test only for a parameter that is unset.)5 E
+(${)108 604.8 Q F3(par)A(ameter)-.15 E F4<3aad>A F3(wor)A(d)-.37 E F0(})
+A F4 .723(Use Default V)144 616.8 R(alues)-.92 E F0 5.723(.I)C(f)-5.723
+E F3(par)4.473 E(ameter)-.15 E F0 .723(is unset or null, the e)3.953 F
+.722(xpansion of)-.15 F F3(wor)3.562 E(d)-.37 E F0 .722(is substituted.)
+3.992 F(Other)5.722 E(-)-.2 E(wise, the v)144 628.8 Q(alue of)-.25 E F3
+(par)3.75 E(ameter)-.15 E F0(is substituted.)3.23 E(${)108 640.8 Q F3
+(par)A(ameter)-.15 E F4(:=)A F3(wor)A(d)-.37 E F0(})A F4 .811
+(Assign Default V)144 652.8 R(alues)-.92 E F0 5.812(.I)C(f)-5.812 E F3
+(par)4.562 E(ameter)-.15 E F0 .812(is unset or null, the e)4.042 F .812
+(xpansion of)-.15 F F3(wor)3.652 E(d)-.37 E F0 .812(is assigned to)4.082
+F F3(pa-)4.562 E -.15(ra)144 664.8 S(meter).15 E F0 5.742(.T).73 G .742
+(he v)-5.742 F .742(alue of)-.25 F F3(par)4.492 E(ameter)-.15 E F0 .742
+(is then substituted.)3.972 F .741
+(Positional parameters and special parame-)5.742 F
+(ters may not be assigned to in this w)144 676.8 Q(ay)-.1 E(.)-.65 E(${)
+108 688.8 Q F3(par)A(ameter)-.15 E F4(:?)A F3(wor)A(d)-.37 E F0(})A F4
+.535(Display Err)144 700.8 R .535(or if Null or Unset)-.18 F F0 5.535
+(.I)C(f)-5.535 E F3(par)4.285 E(ameter)-.15 E F0 .535
+(is null or unset, the e)3.765 F .535(xpansion of)-.15 F F3(wor)3.035 E
+(d)-.37 E F0 .535(\(or a mes-)3.035 F .013(sage to that ef)144 712.8 R
+.013(fect if)-.25 F F3(wor)2.853 E(d)-.37 E F0 .013(is not present\) is\
+ written to the standard error and the shell, if it is not in-)3.283 F
+(teracti)144 724.8 Q -.15(ve)-.25 G 2.5(,e).15 G 2.5(xits. Otherwise,)
+-2.65 F(the v)2.5 E(alue of)-.25 E F3(par)2.5 E(ameter)-.15 E F0
+(is substituted.)2.5 E(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E
+(22)190.395 E 0 Cg EP
+%%Page: 23 23
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E(${)108 84 Q/F1 10
+/Times-Italic@0 SF(par)A(ameter)-.15 E/F2 10/Times-Bold@0 SF(:+)A F1
+(wor)A(d)-.37 E F0(})A F2 .745(Use Alter)144 96 R .745(nate V)-.15 F
+(alue)-.92 E F0 5.745(.I)C(f)-5.745 E F1(par)4.495 E(ameter)-.15 E F0
+.745(is null or unset, nothing is substituted, otherwise the e)3.975 F
+(xpan-)-.15 E(sion of)144 108 Q F1(wor)2.84 E(d)-.37 E F0
+(is substituted.)3.27 E(${)108 120 Q F1(par)A(ameter)-.15 E F2(:)A F1
+(of)A(fset)-.18 E F0(})A(${)108 132 Q F1(par)A(ameter)-.15 E F2(:)A F1
+(of)A(fset)-.18 E F2(:)A F1(length)A F0(})A F2 .002(Substring Expansion)
+144 144 R F0 5.002(.E)C .002(xpands to up to)-5.002 F F1(length)2.502 E
+F0 .002(characters of the v)2.502 F .002(alue of)-.25 F F1(par)2.502 E
+(ameter)-.15 E F0 .002(starting at the)2.502 F .235
+(character speci\214ed by)144 156 R F1(of)2.735 E(fset)-.18 E F0 5.235
+(.I)C(f)-5.235 E F1(par)2.735 E(ameter)-.15 E F0(is)2.735 E F2(@)2.735 E
+F0 2.735(,a)C 2.735(ni)-2.735 G(nde)-2.735 E -.15(xe)-.15 G 2.735(da).15
+G .235(rray subscripted by)-2.735 F F2(@)2.735 E F0(or)2.735 E F2(*)
+2.735 E F0 2.735(,o)C 2.735(ra)-2.735 G 2.735(na)-2.735 G(s-)-2.735 E
+(sociati)144 168 Q 1.578 -.15(ve a)-.25 H 1.278
+(rray name, the results dif).15 F 1.277(fer as described belo)-.25 F
+5.077 -.65(w. I)-.25 H(f).65 E F1(length)3.777 E F0 1.277(is omitted, e)
+3.777 F 1.277(xpands to the)-.15 F .042(substring of the v)144 180 R
+.042(alue of)-.25 F F1(par)2.542 E(ameter)-.15 E F0 .043
+(starting at the character speci\214ed by)2.542 F F1(of)2.543 E(fset)
+-.18 E F0 .043(and e)2.543 F .043(xtending to the)-.15 F .847
+(end of the v)144 192 R(alue.)-.25 E F1(length)5.846 E F0(and)3.346 E F1
+(of)3.346 E(fset)-.18 E F0 .846(are arithmetic e)3.346 F .846
+(xpressions \(see)-.15 F/F3 9/Times-Bold@0 SF .846(ARITHMETIC EV)3.346 F
+(ALU)-1.215 E -.855(AT)-.54 G(ION).855 E F0(belo)144 204 Q(w\).)-.25 E
+(If)144 228 Q F1(of)3.028 E(fset)-.18 E F0 -.25(eva)3.029 G .529
+(luates to a number less than zero, the v).25 F .529
+(alue is used as an of)-.25 F .529(fset in characters from the)-.25 F
+.046(end of the v)144 240 R .046(alue of)-.25 F F1(par)2.546 E(ameter)
+-.15 E F0 5.046(.I)C(f)-5.046 E F1(length)2.546 E F0 -.25(eva)2.546 G
+.046(luates to a number less than zero, it is interpreted as an).25 F
+(of)144 252 Q .202(fset in characters from the end of the v)-.25 F .202
+(alue of)-.25 F F1(par)2.702 E(ameter)-.15 E F0 .203
+(rather than a number of characters, and)2.702 F .558(the e)144 264 R
+.558(xpansion is the characters between)-.15 F F1(of)3.058 E(fset)-.18 E
+F0 .558(and that result.)3.058 F .557(Note that a ne)5.557 F -.05(ga)
+-.15 G(ti).05 E .857 -.15(ve o)-.25 H -.25(ff).15 G .557(set must be).25
+F(separated from the colon by at least one space to a)144 276 Q -.2(vo)
+-.2 G(id being confused with the).2 E F2(:-)2.5 E F0 -.15(ex)2.5 G
+(pansion.).15 E(If)144 300 Q F1(par)2.958 E(ameter)-.15 E F0(is)2.958 E
+F2(@)2.958 E F0 2.958(,t)C .458(he result is)-2.958 F F1(length)2.959 E
+F0 .459(positional parameters be)2.959 F .459(ginning at)-.15 F F1(of)
+2.959 E(fset)-.18 E F0 5.459(.A)C(ne)-2.5 E -.05(ga)-.15 G(ti).05 E -.15
+(ve)-.25 G F1(of)3.109 E(fset)-.18 E F0 .6(is tak)144 312 R .6
+(en relati)-.1 F .9 -.15(ve t)-.25 H 3.1(oo).15 G .6
+(ne greater than the greatest positional parameter)-3.1 F 3.1(,s)-.4 G
+3.1(oa)-3.1 G 3.1(no)-3.1 G -.25(ff)-3.1 G .6(set of \2551 e).25 F -.25
+(va)-.25 G(luates).25 E .639(to the last positional parameter)144 324 R
+5.639(.I)-.55 G 3.139(ti)-5.639 G 3.139(sa)-3.139 G 3.139(ne)-3.139 G
+.639(xpansion error if)-3.289 F F1(length)3.14 E F0 -.25(eva)3.14 G .64
+(luates to a number less than).25 F(zero.)144 336 Q(If)144 360 Q F1(par)
+3.014 E(ameter)-.15 E F0 .514(is an inde)3.014 F -.15(xe)-.15 G 3.014
+(da).15 G .514(rray name subscripted by @ or *, the result is the)-3.014
+F F1(length)3.014 E F0 .513(members of)3.013 F 1.081(the array be)144
+372 R 1.081(ginning with ${)-.15 F F1(par)A(ameter)-.15 E F0([)A F1(of)A
+(fset)-.18 E F0 3.581(]}. A)B(ne)3.581 E -.05(ga)-.15 G(ti).05 E -.15
+(ve)-.25 G F1(of)3.732 E(fset)-.18 E F0 1.082(is tak)3.582 F 1.082
+(en relati)-.1 F 1.382 -.15(ve t)-.25 H 3.582(oo).15 G 1.082(ne greater)
+-3.582 F 1.08(than the maximum inde)144 384 R 3.58(xo)-.15 G 3.58(ft)
+-3.58 G 1.08(he speci\214ed array)-3.58 F 6.079(.I)-.65 G 3.579(ti)
+-6.079 G 3.579(sa)-3.579 G 3.579(ne)-3.579 G 1.079(xpansion error if)
+-3.729 F F1(length)3.579 E F0 -.25(eva)3.579 G 1.079(luates to a).25 F
+(number less than zero.)144 396 Q(Substring e)144 420 Q
+(xpansion applied to an associati)-.15 E .3 -.15(ve a)-.25 H
+(rray produces unde\214ned results.).15 E .82(Substring inde)144 444 R
+.821(xing is zero-based unless the positional parameters are used, in w\
+hich case the in-)-.15 F(de)144 456 Q .159(xing starts at 1 by def)-.15
+F 2.659(ault. If)-.1 F F1(of)2.659 E(fset)-.18 E F0 .159
+(is 0, and the positional parameters are used,)2.659 F F2($0)2.659 E F0
+.159(is pre\214x)2.659 F .158(ed to)-.15 F(the list.)144 468 Q(${)108
+484.8 Q F2(!)A F1(pr)A(e\214x)-.37 E F2(*)A F0(})A(${)108 496.8 Q F2(!)A
+F1(pr)A(e\214x)-.37 E F2(@)A F0(})A F2 .084(Names matching pr)144 508.8
+R(e\214x)-.18 E F0 5.084(.E)C .084(xpands to the names of v)-5.084 F
+.084(ariables whose names be)-.25 F .085(gin with)-.15 F F1(pr)2.585 E
+(e\214x)-.37 E F0 2.585(,s)C(epa-)-2.585 E .258
+(rated by the \214rst character of the)144 520.8 R F3(IFS)2.758 E F0
+.257(special v)2.507 F 2.757(ariable. When)-.25 F F1(@)2.757 E F0 .257
+(is used and the e)2.757 F .257(xpansion appears)-.15 F
+(within double quotes, each v)144 532.8 Q(ariable name e)-.25 E
+(xpands to a separate w)-.15 E(ord.)-.1 E(${)108 549.6 Q F2(!)A F1(name)
+A F0([)A F1(@)A F0(]})A(${)108 561.6 Q F2(!)A F1(name)A F0([)A F1(*)A F0
+(]})A F2 1.136(List of array k)144 573.6 R(eys)-.1 E F0 6.136(.I)C(f)
+-6.136 E F1(name)3.636 E F0 1.136(is an array v)3.636 F 1.136
+(ariable, e)-.25 F 1.136(xpands to the list of array indices \(k)-.15 F
+-.15(ey)-.1 G 1.137(s\) as-).15 F .397(signed in)144 585.6 R F1(name)
+2.897 E F0 5.397(.I)C(f)-5.397 E F1(name)2.897 E F0 .397
+(is not an array)2.897 F 2.897(,e)-.65 G .397(xpands to 0 if)-3.047 F F1
+(name)2.897 E F0 .397(is set and null otherwise.)2.897 F(When)5.397 E F1
+(@)2.897 E F0(is used and the e)144 597.6 Q
+(xpansion appears within double quotes, each k)-.15 E .3 -.15(ey ex)-.1
+H(pands to a separate w).15 E(ord.)-.1 E(${)108 614.4 Q F2(#)A F1(par)A
+(ameter)-.15 E F0(})A F2 -.1(Pa)144 626.4 S .47(rameter length).1 F F0
+5.47(.T)C .471(he length in characters of the v)-5.47 F .471(alue of)
+-.25 F F1(par)2.971 E(ameter)-.15 E F0 .471(is substituted.)2.971 F(If)
+5.471 E F1(par)4.221 E(ame-)-.15 E(ter)144 638.4 Q F0(is)3.627 E F2(*)
+2.897 E F0(or)2.897 E F2(@)2.897 E F0 2.897(,t)C .397(he v)-2.897 F .397
+(alue substituted is the number of positional parameters.)-.25 F(If)
+5.396 E F1(par)4.146 E(ameter)-.15 E F0 .396(is an ar)3.626 F(-)-.2 E
+.78(ray name subscripted by)144 650.4 R F2(*)3.28 E F0(or)3.28 E F2(@)
+3.28 E F0 3.28(,t)C .78(he v)-3.28 F .781
+(alue substituted is the number of elements in the array)-.25 F 5.781
+(.I)-.65 G(f)-5.781 E F1(par)145.25 662.4 Q(ameter)-.15 E F0 .456
+(is an inde)3.686 F -.15(xe)-.15 G 2.956(da).15 G .456
+(rray name subscripted by a ne)-2.956 F -.05(ga)-.15 G(ti).05 E .756
+-.15(ve n)-.25 H(umber).15 E 2.955(,t)-.4 G .455
+(hat number is interpreted)-2.955 F .972(as relati)144 674.4 R 1.272
+-.15(ve t)-.25 H 3.472(oo).15 G .973(ne greater than the maximum inde)
+-3.472 F 3.473(xo)-.15 G(f)-3.473 E F1(par)3.473 E(ameter)-.15 E F0
+3.473(,s)C 3.473(on)-3.473 G -2.25 -.15(eg a)-3.473 H(ti).15 E 1.273
+-.15(ve i)-.25 H .973(ndices count back).15 F(from the end of the array)
+144 686.4 Q 2.5(,a)-.65 G(nd an inde)-2.5 E 2.5(xo)-.15 G 2.5<66ad>-2.5
+G 2.5(1r)-2.5 G(eferences the last element.)-2.5 E(${)108 703.2 Q F1
+(par)A(ameter)-.15 E F2(#)A F1(wor)A(d)-.37 E F0(})A(GNU Bash 5.1)72 768
+Q(2020 October 29)141.235 E(23)190.395 E 0 Cg EP
+%%Page: 24 24
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E(${)108 84 Q/F1 10
+/Times-Italic@0 SF(par)A(ameter)-.15 E/F2 10/Times-Bold@0 SF(##)A F1
+(wor)A(d)-.37 E F0(})A F2(Remo)144 96 Q 1.396 -.1(ve m)-.1 H 1.196
+(atching pr).1 F 1.196(e\214x patter)-.18 F(n)-.15 E F0 6.196(.T)C(he)
+-6.196 E F1(wor)4.036 E(d)-.37 E F0 1.196(is e)4.466 F 1.196
+(xpanded to produce a pattern just as in path-)-.15 F .543(name e)144
+108 R .544(xpansion, and matched ag)-.15 F .544(ainst the e)-.05 F .544
+(xpanded v)-.15 F .544(alue of)-.25 F F1(par)4.294 E(ameter)-.15 E F0
+.544(using the rules described)3.774 F(under)144 120 Q F2 -.1(Pa)3.133 G
+(tter).1 E 3.133(nM)-.15 G(atching)-3.133 E F0(belo)3.132 E 4.432 -.65
+(w. I)-.25 H 3.132(ft).65 G .632(he pattern matches the be)-3.132 F .632
+(ginning of the v)-.15 F .632(alue of)-.25 F F1(par)4.382 E(ameter)-.15
+E F0(,).73 E 1.151(then the result of the e)144 132 R 1.151
+(xpansion is the e)-.15 F 1.151(xpanded v)-.15 F 1.151(alue of)-.25 F F1
+(par)4.902 E(ameter)-.15 E F0 1.152(with the shortest matching)4.382 F
+.184(pattern \(the `)144 144 R(`)-.74 E F2(#)A F0 1.664 -.74('' c)D .184
+(ase\) or the longest matching pattern \(the `).74 F(`)-.74 E F2(##)A F0
+1.664 -.74('' c)D .184(ase\) deleted.).74 F(If)5.183 E F1(par)3.933 E
+(ameter)-.15 E F0(is)3.413 E F2(@)2.683 E F0(or)144 156 Q F2(*)3.018 E
+F0 3.018(,t)C .518(he pattern remo)-3.018 F -.25(va)-.15 G 3.018(lo).25
+G .518
+(peration is applied to each positional parameter in turn, and the e)
+-3.018 F(xpan-)-.15 E .304(sion is the resultant list.)144 168 R(If)
+5.304 E F1(par)4.054 E(ameter)-.15 E F0 .303(is an array v)3.533 F .303
+(ariable subscripted with)-.25 F F2(@)2.803 E F0(or)2.803 E F2(*)2.803 E
+F0 2.803(,t)C .303(he pattern re-)-2.803 F(mo)144 180 Q -.25(va)-.15 G
+2.987(lo).25 G .487
+(peration is applied to each member of the array in turn, and the e)
+-2.987 F .487(xpansion is the resultant)-.15 F(list.)144 192 Q(${)108
+208.8 Q F1(par)A(ameter)-.15 E F2(%)A F1(wor)A(d)-.37 E F0(})A(${)108
+220.8 Q F1(par)A(ameter)-.15 E F2(%%)A F1(wor)A(d)-.37 E F0(})A F2(Remo)
+144 232.8 Q .347 -.1(ve m)-.1 H .147(atching suf\214x patter).1 F(n)-.15
+E F0 5.147(.T)C(he)-5.147 E F1(wor)2.647 E(d)-.37 E F0 .147(is e)2.647 F
+.146(xpanded to produce a pattern just as in pathname)-.15 F -.15(ex)144
+244.8 S .458(pansion, and matched ag).15 F .458(ainst the e)-.05 F .458
+(xpanded v)-.15 F .458(alue of)-.25 F F1(par)4.209 E(ameter)-.15 E F0
+.459(using the rules described under)3.689 F F2 -.1(Pa)144 256.8 S(tter)
+.1 E 3.314(nM)-.15 G(atching)-3.314 E F0(belo)3.314 E 4.614 -.65(w. I)
+-.25 H 3.314(ft).65 G .814
+(he pattern matches a trailing portion of the e)-3.314 F .814(xpanded v)
+-.15 F .814(alue of)-.25 F F1(pa-)4.564 E -.15(ra)144 268.8 S(meter).15
+E F0 3.816(,t).73 G 1.316(hen the result of the e)-3.816 F 1.317
+(xpansion is the e)-.15 F 1.317(xpanded v)-.15 F 1.317(alue of)-.25 F F1
+(par)5.067 E(ameter)-.15 E F0 1.317(with the shortest)4.547 F 1.085
+(matching pattern \(the `)144 280.8 R(`)-.74 E F2(%)A F0 2.565 -.74
+('' c)D 1.084(ase\) or the longest matching pattern \(the `).74 F(`)-.74
+E F2(%%)A F0 2.564 -.74('' c)D 1.084(ase\) deleted.).74 F(If)6.084 E F1
+(par)145.25 292.8 Q(ameter)-.15 E F0(is)3.389 E F2(@)2.659 E F0(or)2.659
+E F2(*)2.659 E F0 2.659(,t)C .159(he pattern remo)-2.659 F -.25(va)-.15
+G 2.659(lo).25 G .16
+(peration is applied to each positional parameter in turn,)-2.659 F .51
+(and the e)144 304.8 R .51(xpansion is the resultant list.)-.15 F(If)
+5.51 E F1(par)4.259 E(ameter)-.15 E F0 .509(is an array v)3.739 F .509
+(ariable subscripted with)-.25 F F2(@)3.009 E F0(or)3.009 E F2(*)3.009 E
+F0(,)A .422(the pattern remo)144 316.8 R -.25(va)-.15 G 2.922(lo).25 G
+.422(peration is applied to each member of the array in turn, and the e)
+-2.922 F .423(xpansion is)-.15 F(the resultant list.)144 328.8 Q(${)108
+345.6 Q F1(par)A(ameter)-.15 E F2(/)A F1(pattern)A F2(/)A F1(string)A F0
+(})A F2 -.1(Pa)144 357.6 S(tter).1 E 3.607(ns)-.15 G(ubstitution)-3.607
+E F0 6.107(.T)C(he)-6.107 E F1(pattern)3.607 E F0 1.107(is e)3.607 F
+1.106(xpanded to produce a pattern just as in pathname e)-.15 F(xpan-)
+-.15 E(sion,)144 369.6 Q F1 -.8(Pa)3.7 G -.15(ra).8 G(meter).15 E F0 1.2
+(is e)3.7 F 1.2(xpanded and the longest match of)-.15 F F1(pattern)3.7 E
+F0(ag)3.7 E 1.2(ainst its v)-.05 F 1.2(alue is replaced with)-.25 F F1
+(string)144 381.6 Q F0 5.397(.T)C .397
+(he match is performed using the rules described under)-5.397 F F2 -.1
+(Pa)2.896 G(tter).1 E 2.896(nM)-.15 G(atching)-2.896 E F0(belo)2.896 E
+4.196 -.65(w. I)-.25 H(f).65 E F1(pat-)2.896 E(tern)144 393.6 Q F0(be)
+2.569 E .069(gins with)-.15 F F2(/)2.569 E F0 2.569(,a)C .069
+(ll matches of)-2.569 F F1(pattern)2.569 E F0 .069(are replaced with)
+2.569 F F1(string)2.57 E F0 5.07(.N)C .07
+(ormally only the \214rst match is)-5.07 F 2.58(replaced. If)144 405.6 R
+F1(pattern)2.58 E F0(be)2.58 E .08(gins with)-.15 F F2(#)2.58 E F0 2.58
+(,i)C 2.58(tm)-2.58 G .079(ust match at the be)-2.58 F .079
+(ginning of the e)-.15 F .079(xpanded v)-.15 F .079(alue of)-.25 F F1
+(par)2.579 E(am-)-.15 E(eter)144 417.6 Q F0 5.761(.I)C(f)-5.761 E F1
+(pattern)3.261 E F0(be)3.261 E .761(gins with)-.15 F F2(%)3.261 E F0
+3.261(,i)C 3.261(tm)-3.261 G .761(ust match at the end of the e)-3.261 F
+.761(xpanded v)-.15 F .761(alue of)-.25 F F1(par)3.262 E(ameter)-.15 E
+F0 5.762(.I)C(f)-5.762 E F1(string)144 429.6 Q F0 .958
+(is null, matches of)3.458 F F1(pattern)3.458 E F0 .958
+(are deleted and the)3.458 F F2(/)3.458 E F0(follo)3.458 E(wing)-.25 E
+F1(pattern)3.457 E F0 .957(may be omitted.)3.457 F .957(If the)5.957 F
+F2(nocasematch)144 441.6 Q F0 .492
+(shell option is enabled, the match is performed without re)2.992 F -.05
+(ga)-.15 G .492(rd to the case of alpha-).05 F .884(betic characters.)
+144 453.6 R(If)5.884 E F1(par)4.634 E(ameter)-.15 E F0(is)4.114 E F2(@)
+3.384 E F0(or)3.383 E F2(*)3.383 E F0 3.383(,t)C .883
+(he substitution operation is applied to each positional)-3.383 F 1.002
+(parameter in turn, and the e)144 465.6 R 1.002
+(xpansion is the resultant list.)-.15 F(If)6.002 E F1(par)4.752 E
+(ameter)-.15 E F0 1.002(is an array v)4.232 F 1.002(ariable sub-)-.25 F
+.159(scripted with)144 477.6 R F2(@)2.659 E F0(or)2.659 E F2(*)2.659 E
+F0 2.659(,t)C .159(he substitution operation is applied to each member \
+of the array in turn, and)-2.659 F(the e)144 489.6 Q
+(xpansion is the resultant list.)-.15 E(${)108 506.4 Q F1(par)A(ameter)
+-.15 E F2(^)A F1(pattern)A F0(})A(${)108 518.4 Q F1(par)A(ameter)-.15 E
+F2(^^)A F1(pattern)A F0(})A(${)108 530.4 Q F1(par)A(ameter)-.15 E F2(,)A
+F1(pattern)A F0(})A(${)108 542.4 Q F1(par)A(ameter)-.15 E F2(,,)A F1
+(pattern)A F0(})A F2 .437(Case modi\214cation)144 554.4 R F0 5.437(.T)C
+.437(his e)-5.437 F .438
+(xpansion modi\214es the case of alphabetic characters in)-.15 F F1(par)
+2.938 E(ameter)-.15 E F0 5.438(.T)C(he)-5.438 E F1(pattern)144 566.4 Q
+F0 .374(is e)2.874 F .374
+(xpanded to produce a pattern just as in pathname e)-.15 F 2.874
+(xpansion. Each)-.15 F .373(character in the e)2.873 F(x-)-.15 E .513
+(panded v)144 578.4 R .513(alue of)-.25 F F1(par)3.013 E(ameter)-.15 E
+F0 .513(is tested ag)3.013 F(ainst)-.05 E F1(pattern)3.013 E F0 3.013
+(,a)C .514(nd, if it matches the pattern, its case is con-)-3.013 F -.15
+(ve)144 590.4 S 2.823(rted. The).15 F .323
+(pattern should not attempt to match more than one character)2.823 F
+5.322(.T)-.55 G(he)-5.322 E F2(^)2.822 E F0 .322(operator con)2.822 F
+-.15(ve)-.4 G(rts).15 E(lo)144 602.4 Q .18(wercase letters matching)-.25
+F F1(pattern)2.681 E F0 .181(to uppercase; the)2.681 F F2(,)2.681 E F0
+.181(operator con)2.681 F -.15(ve)-.4 G .181
+(rts matching uppercase letters).15 F .085(to lo)144 614.4 R 2.585
+(wercase. The)-.25 F F2(^^)2.585 E F0(and)2.585 E F2(,,)2.585 E F0 -.15
+(ex)2.585 G .085(pansions con).15 F -.15(ve)-.4 G .085
+(rt each matched character in the e).15 F .085(xpanded v)-.15 F .085
+(alue; the)-.25 F F2(^)2.585 E F0(and)144 626.4 Q F2(,)3.59 E F0 -.15
+(ex)3.59 G 1.09(pansions match and con).15 F -.15(ve)-.4 G 1.091
+(rt only the \214rst character in the e).15 F 1.091(xpanded v)-.15 F
+3.591(alue. If)-.25 F F1(pattern)3.591 E F0(is)3.591 E 1.121
+(omitted, it is treated lik)144 638.4 R 3.621(ea)-.1 G F2(?)A F0 3.621
+(,w)C 1.121(hich matches e)-3.621 F -.15(ve)-.25 G 1.121(ry character)
+.15 F 6.12(.I)-.55 G(f)-6.12 E F1(par)4.87 E(ameter)-.15 E F0(is)4.35 E
+F2(@)3.62 E F0(or)3.62 E F2(*)3.62 E F0 3.62(,t)C 1.12(he case)-3.62 F
+.339(modi\214cation operation is applied to each positional parameter i\
+n turn, and the e)144 650.4 R .34(xpansion is the re-)-.15 F .25
+(sultant list.)144 662.4 R(If)5.25 E F1(par)4 E(ameter)-.15 E F0 .25
+(is an array v)3.48 F .249(ariable subscripted with)-.25 F F2(@)2.749 E
+F0(or)2.749 E F2(*)2.749 E F0 2.749(,t)C .249
+(he case modi\214cation oper)-2.749 F(-)-.2 E
+(ation is applied to each member of the array in turn, and the e)144
+674.4 Q(xpansion is the resultant list.)-.15 E(${)108 691.2 Q F1(par)A
+(ameter)-.15 E F2(@)A F1(oper)A(ator)-.15 E F0(})A F2 -.1(Pa)144 703.2 S
+.86(rameter transf).1 F(ormation)-.25 E F0 5.86(.T)C .86(he e)-5.86 F
+.86(xpansion is either a transformation of the v)-.15 F .86(alue of)-.25
+F F1(par)3.36 E(ameter)-.15 E F0 .154(or information about)144 715.2 R
+F1(par)2.654 E(ameter)-.15 E F0 .153(itself, depending on the v)2.654 F
+.153(alue of)-.25 F F1(oper)2.653 E(ator)-.15 E F0 5.153(.E)C(ach)-5.153
+E F1(oper)2.653 E(ator)-.15 E F0 .153(is a sin-)2.653 F(gle letter:)144
+727.2 Q(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(24)190.395 E 0
+Cg EP
+%%Page: 25 25
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(U)144 84 Q F0 .142(The e)180 84 R .142
+(xpansion is a string that is the v)-.15 F .142(alue of)-.25 F/F2 10
+/Times-Italic@0 SF(par)2.642 E(ameter)-.15 E F0 .142(with lo)2.642 F
+.143(wercase alphabetic charac-)-.25 F(ters con)180 96 Q -.15(ve)-.4 G
+(rted to uppercase.).15 E F1(u)144 108 Q F0 .43(The e)180 108 R .43
+(xpansion is a string that is the v)-.15 F .429(alue of)-.25 F F2(par)
+2.929 E(ameter)-.15 E F0 .429(with the \214rst character con)2.929 F
+-.15(ve)-.4 G(rted).15 E(to uppercase, if it is alphabetic.)180 120 Q F1
+(L)144 132 Q F0 .124(The e)180 132 R .124
+(xpansion is a string that is the v)-.15 F .124(alue of)-.25 F F2(par)
+2.624 E(ameter)-.15 E F0 .125(with uppercase alphabetic charac-)2.625 F
+(ters con)180 144 Q -.15(ve)-.4 G(rted to lo).15 E(wercase.)-.25 E F1(Q)
+144 156 Q F0 1.065(The e)180 156 R 1.065
+(xpansion is a string that is the v)-.15 F 1.065(alue of)-.25 F F2(par)
+3.565 E(ameter)-.15 E F0 1.064(quoted in a format that can be)3.565 F
+(reused as input.)180 168 Q F1(E)144 180 Q F0 .44(The e)180 180 R .441
+(xpansion is a string that is the v)-.15 F .441(alue of)-.25 F F2(par)
+2.941 E(ameter)-.15 E F0 .441(with backslash escape sequences)2.941 F
+-.15(ex)180 192 S(panded as with the).15 E F1($'...)2.5 E(')-.55 E F0
+(quoting mechanism.)2.5 E F1(P)144 204 Q F0 1.073(The e)180 204 R 1.073
+(xpansion is a string that is the result of e)-.15 F 1.073
+(xpanding the v)-.15 F 1.073(alue of)-.25 F F2(par)3.573 E(ameter)-.15 E
+F0 1.073(as if it)3.573 F(were a prompt string \(see)180 216 Q F1(PR)2.5
+E(OMPTING)-.3 E F0(belo)2.5 E(w\).)-.25 E F1(A)144 228 Q F0 1.137(The e)
+180 228 R 1.138
+(xpansion is a string in the form of an assignment statement or)-.15 F
+F1(declar)3.638 E(e)-.18 E F0(command)3.638 E(that, if e)180 240 Q -.25
+(va)-.25 G(luated, will recreate).25 E F2(par)2.5 E(ameter)-.15 E F0
+(with its attrib)2.5 E(utes and v)-.2 E(alue.)-.25 E F1(K)144 252 Q F0
+1.34(Produces a possibly-quoted v)180 252 R 1.339(ersion of the v)-.15 F
+1.339(alue of)-.25 F F2(par)3.839 E(ameter)-.15 E F0 3.839(,e)C 1.339
+(xcept that it prints the)-3.989 F -.25(va)180 264 S .257(lues of inde)
+.25 F -.15(xe)-.15 G 2.757(da).15 G .257(nd associati)-2.757 F .557 -.15
+(ve a)-.25 H .257(rrays as a sequence of quoted k).15 F -.15(ey)-.1 G
+(-v).15 E .257(alue pairs \(see)-.25 F F1(Ar)2.758 E(-)-.37 E(rays)180
+276 Q F0(abo)2.5 E -.15(ve)-.15 G(\).).15 E F1(a)144 288 Q F0(The e)180
+288 Q(xpansion is a string consisting of \215ag v)-.15 E
+(alues representing)-.25 E F2(par)2.5 E(ameter)-.15 E F0 1.1 -.55('s a)D
+(ttrib).55 E(utes.)-.2 E(If)144 304.8 Q F2(par)4.403 E(ameter)-.15 E F0
+(is)3.883 E F1(@)3.153 E F0(or)3.153 E F1(*)3.153 E F0 3.153(,t)C .653(\
+he operation is applied to each positional parameter in turn, and the e)
+-3.153 F(x-)-.15 E .403(pansion is the resultant list.)144 316.8 R(If)
+5.403 E F2(par)4.153 E(ameter)-.15 E F0 .403(is an array v)3.633 F .403
+(ariable subscripted with)-.25 F F1(@)2.903 E F0(or)2.903 E F1(*)2.903 E
+F0 2.903(,t)C .403(he opera-)-2.903 F
+(tion is applied to each member of the array in turn, and the e)144
+328.8 Q(xpansion is the resultant list.)-.15 E .708(The result of the e)
+144 352.8 R .708(xpansion is subject to w)-.15 F .708
+(ord splitting and pathname e)-.1 F .708(xpansion as described be-)-.15
+F(lo)144 364.8 Q -.65(w.)-.25 G F1(Command Substitution)87 381.6 Q F2
+1.697(Command substitution)108 393.6 R F0(allo)4.197 E 1.697
+(ws the output of a command to replace the command name.)-.25 F 1.698
+(There are tw)6.698 F(o)-.1 E(forms:)108 405.6 Q F1($\()144 422.4 Q F2
+(command)A F1(\))1.666 E F0(or)108 434.4 Q F1<92>144 446.4 Q F2(command)
+A F1<92>A(Bash)108 463.2 Q F0 .089(performs the e)2.589 F .089
+(xpansion by e)-.15 F -.15(xe)-.15 G(cuting).15 E F2(command)2.589 E F0
+.088(in a subshell en)2.589 F .088(vironment and replacing the command)
+-.4 F .41(substitution with the standard output of the command, with an)
+108 475.2 R 2.91(yt)-.15 G .41(railing ne)-2.91 F .41(wlines deleted.)
+-.25 F .41(Embedded ne)5.41 F(w-)-.25 E .192(lines are not deleted, b)
+108 487.2 R .192(ut the)-.2 F 2.692(ym)-.15 G .192(ay be remo)-2.692 F
+-.15(ve)-.15 G 2.692(dd).15 G .192(uring w)-2.692 F .192(ord splitting.)
+-.1 F .192(The command substitution)5.192 F F1($\(cat)2.691 E F2(\214le)
+2.691 E F1(\))A F0(can be replaced by the equi)108 499.2 Q -.25(va)-.25
+G(lent b).25 E(ut f)-.2 E(aster)-.1 E F1($\(<)2.5 E F2(\214le)2.5 E F1
+(\))A F0(.)A 1.724(When the old-style backquote form of substitution is\
+ used, backslash retains its literal meaning e)108 516 R(xcept)-.15 E
+.315(when follo)108 528 R .315(wed by)-.25 F F1($)2.815 E F0(,)A F1<92>
+2.815 E F0 2.815(,o)C(r)-2.815 E F1(\\)2.815 E F0 5.315(.T)C .314(he \
+\214rst backquote not preceded by a backslash terminates the command su\
+b-)-5.315 F 3.886(stitution. When)108 540 R 1.386(using the $\()3.886 F
+F2(command).833 E F0 3.886(\)f)1.666 G 1.387
+(orm, all characters between the parentheses mak)-3.886 F 3.887(eu)-.1 G
+3.887(pt)-3.887 G 1.387(he com-)-3.887 F
+(mand; none are treated specially)108 552 Q(.)-.65 E .894
+(Command substitutions may be nested.)108 568.8 R 2.494 -.8(To n)5.894 H
+.894(est when using the backquoted form, escape the inner back-).8 F
+(quotes with backslashes.)108 580.8 Q .422
+(If the substitution appears within double quotes, w)108 597.6 R .422
+(ord splitting and pathname e)-.1 F .423(xpansion are not performed)-.15
+F(on the results.)108 609.6 Q F1(Arithmetic Expansion)87 626.4 Q F0
+1.035(Arithmetic e)108 638.4 R 1.035(xpansion allo)-.15 F 1.035
+(ws the e)-.25 F -.25(va)-.25 G 1.034(luation of an arithmetic e).25 F
+1.034(xpression and the substitution of the result.)-.15 F
+(The format for arithmetic e)108 650.4 Q(xpansion is:)-.15 E F1($\(\()
+144 667.2 Q F2 -.2(ex)C(pr).2 E(ession)-.37 E F1(\)\))A F0(The)108 684 Q
+F2 -.2(ex)2.665 G(pr).2 E(ession)-.37 E F0 .165
+(is treated as if it were within double quotes, b)2.905 F .166
+(ut a double quote inside the parentheses is not)-.2 F .231
+(treated specially)108 696 R 5.231(.A)-.65 G .231(ll tok)-5.231 F .231
+(ens in the e)-.1 F .231(xpression under)-.15 F .231(go parameter and v)
+-.18 F .23(ariable e)-.25 F .23(xpansion, command substi-)-.15 F .048
+(tution, and quote remo)108 708 R -.25(va)-.15 G 2.548(l. The).25 F .048
+(result is treated as the arithmetic e)2.548 F .048(xpression to be e)
+-.15 F -.25(va)-.25 G 2.549(luated. Arithmetic).25 F -.15(ex)2.549 G(-)
+.15 E(pansions may be nested.)108 720 Q(GNU Bash 5.1)72 768 Q
+(2020 October 29)141.235 E(25)190.395 E 0 Cg EP
+%%Page: 26 26
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E 1.379(The e)108 84
+R -.25(va)-.25 G 1.378
+(luation is performed according to the rules listed belo).25 F 3.878(wu)
+-.25 G(nder)-3.878 E/F1 9/Times-Bold@0 SF 1.378(ARITHMETIC EV)3.878 F
+(ALU)-1.215 E -.855(AT)-.54 G(ION).855 E/F2 9/Times-Roman@0 SF(.)A F0
+(If)5.878 E/F3 10/Times-Italic@0 SF -.2(ex)108 96 S(pr).2 E(ession)-.37
+E F0(is in)2.74 E -.25(va)-.4 G(lid,).25 E/F4 10/Times-Bold@0 SF(bash)
+2.5 E F0(prints a message indicating f)2.5 E
+(ailure and no substitution occurs.)-.1 E F4(Pr)87 112.8 Q
+(ocess Substitution)-.18 E F3(Pr)108 124.8 Q .405(ocess substitution)
+-.45 F F0(allo)2.905 E .405(ws a process')-.25 F 2.905(si)-.55 G .405
+(nput or output to be referred to using a \214lename.)-2.905 F .405
+(It tak)5.405 F .405(es the form)-.1 F(of)108 136.8 Q F4(<\()3.251 E F3
+(list)A F4(\)).833 E F0(or)3.251 E F4(>\()3.251 E F3(list)A F4(\)).833 E
+F0 5.751(.T)C .751(he process)-5.751 F F3(list)3.251 E F0 .751
+(is run asynchronously)3.251 F 3.251(,a)-.65 G .751
+(nd its input or output appears as a \214lename.)-3.251 F .147
+(This \214lename is passed as an ar)108 148.8 R .148
+(gument to the current command as the result of the e)-.18 F 2.648
+(xpansion. If)-.15 F(the)2.648 E F4(>\()2.648 E F3(list)A F4(\)).833 E
+F0 .56(form is used, writing to the \214le will pro)108 160.8 R .56
+(vide input for)-.15 F F3(list)3.059 E F0 5.559(.I)C 3.059(ft)-5.559 G
+(he)-3.059 E F4(<\()3.059 E F3(list)A F4(\)).833 E F0 .559
+(form is used, the \214le passed as an)3.059 F(ar)108 172.8 Q .308
+(gument should be read to obtain the output of)-.18 F F3(list)2.808 E F0
+5.308(.P)C .309(rocess substitution is supported on systems that sup-)
+-5.308 F(port named pipes \()108 184.8 Q F3(FIFOs)A F0 2.5(\)o)C 2.5(rt)
+-2.5 G(he)-2.5 E F4(/de)2.5 E(v/fd)-.15 E F0
+(method of naming open \214les.)2.5 E .897(When a)108 201.6 R -.25(va)
+-.2 G .896(ilable, process substitution is performed simultaneously wit\
+h parameter and v).25 F .896(ariable e)-.25 F(xpansion,)-.15 E
+(command substitution, and arithmetic e)108 213.6 Q(xpansion.)-.15 E F4
+-.75(Wo)87 230.4 S(rd Splitting).75 E F0 1.142
+(The shell scans the results of parameter e)108 242.4 R 1.143
+(xpansion, command substitution, and arithmetic e)-.15 F 1.143
+(xpansion that)-.15 F(did not occur within double quotes for)108 254.4 Q
+F3(wor)2.84 E 2.5(ds)-.37 G(plitting)-2.5 E F0(.).22 E .063
+(The shell treats each character of)108 271.2 R F1(IFS)2.563 E F0 .063
+(as a delimiter)2.313 F 2.563(,a)-.4 G .063
+(nd splits the results of the other e)-2.563 F .063(xpansions into w)
+-.15 F(ords)-.1 E .207(using these characters as \214eld terminators.)
+108 283.2 R(If)5.207 E F1(IFS)2.707 E F0 .207(is unset, or its v)2.457 F
+.207(alue is e)-.25 F(xactly)-.15 E F4(<space><tab><newline>)2.708 E F0
+(,)A .837(the def)108 295.2 R .837(ault, then sequences of)-.1 F F4
+(<space>)3.337 E F0(,)A F4(<tab>)3.337 E F0 3.337(,a)C(nd)-3.337 E F4
+(<newline>)3.337 E F0 .836(at the be)3.336 F .836
+(ginning and end of the results of)-.15 F .345(the pre)108 307.2 R .345
+(vious e)-.25 F .345(xpansions are ignored, and an)-.15 F 2.845(ys)-.15
+G .345(equence of)-2.845 F F1(IFS)2.845 E F0 .345
+(characters not at the be)2.595 F .345(ginning or end serv)-.15 F(es)
+-.15 E 1.237(to delimit w)108 319.2 R 3.737(ords. If)-.1 F F1(IFS)3.737
+E F0 1.236(has a v)3.486 F 1.236(alue other than the def)-.25 F 1.236
+(ault, then sequences of the whitespace characters)-.1 F F4(space)108
+331.2 Q F0(,)A F4(tab)2.506 E F0 2.506(,a)C(nd)-2.506 E F4(newline)2.506
+E F0 .006(are ignored at the be)2.506 F .006(ginning and end of the w)
+-.15 F .007(ord, as long as the whitespace charac-)-.1 F .921
+(ter is in the v)108 343.2 R .92(alue of)-.25 F F1(IFS)3.42 E F0(\(an)
+3.17 E F1(IFS)3.42 E F0 .92(whitespace character\).)3.17 F(An)5.92 E
+3.42(yc)-.15 G .92(haracter in)-3.42 F F1(IFS)3.42 E F0 .92(that is not)
+3.17 F F1(IFS)3.42 E F0(whitespace,)3.17 E .428(along with an)108 355.2
+R 2.928(ya)-.15 G(djacent)-2.928 E F1(IFS)2.928 E F0 .428
+(whitespace characters, delimits a \214eld.)2.678 F 2.928(As)5.428 G
+.428(equence of)-2.928 F F1(IFS)2.928 E F0 .429(whitespace charac-)2.679
+F(ters is also treated as a delimiter)108 367.2 Q 5(.I)-.55 G 2.5(ft)-5
+G(he v)-2.5 E(alue of)-.25 E F1(IFS)2.5 E F0(is null, no w)2.25 E
+(ord splitting occurs.)-.1 E .783(Explicit null ar)108 384 R .783
+(guments \()-.18 F F4 .833("").833 G F0(or)2.449 E F4 .833<0808>4.115 G
+F0 3.282(\)a)C .782
+(re retained and passed to commands as empty strings.)-3.282 F .782
+(Unquoted im-)5.782 F .178(plicit null ar)108 396 R .179
+(guments, resulting from the e)-.18 F .179
+(xpansion of parameters that ha)-.15 F .479 -.15(ve n)-.2 H 2.679(ov).15
+G .179(alues, are remo)-2.929 F -.15(ve)-.15 G 2.679(d. If).15 F 2.679
+(ap)2.679 G(a-)-2.679 E .319(rameter with no v)108 408 R .319(alue is e)
+-.25 F .319(xpanded within double quotes, a null ar)-.15 F .319
+(gument results and is retained and passed)-.18 F
+(to a command as an empty string.)108 420 Q(When a quoted null ar)5 E
+.001(gument appears as part of a w)-.18 F .001(ord whose e)-.1 F
+(xpansion)-.15 E .984(is non-null, the null ar)108 432 R .984
+(gument is remo)-.18 F -.15(ve)-.15 G 3.483(d. That).15 F .983
+(is, the w)3.483 F(ord)-.1 E/F5 10/Courier@0 SF -5.167<ad64082008>3.483
+F F0(becomes)3.483 E F5<ad64>3.483 E F0 .983(after w)3.483 F .983
+(ord splitting and)-.1 F(null ar)108 444 Q(gument remo)-.18 E -.25(va)
+-.15 G(l.).25 E(Note that if no e)108 460.8 Q
+(xpansion occurs, no splitting is performed.)-.15 E F4 -.1(Pa)87 477.6 S
+(thname Expansion).1 E F0 .37(After w)108 489.6 R .37
+(ord splitting, unless the)-.1 F F4<ad66>2.87 E F0 .37
+(option has been set,)2.87 F F4(bash)2.87 E F0 .371(scans each w)2.871 F
+.371(ord for the characters)-.1 F F4(*)2.871 E F0(,)A F4(?)2.871 E F0
+2.871(,a)C(nd)-2.871 E F4([)2.871 E F0(.)A .634
+(If one of these characters appears, and is not quoted, then the w)108
+501.6 R .634(ord is re)-.1 F -.05(ga)-.15 G .633(rded as a).05 F F3
+(pattern)4.383 E F0 3.133(,a).24 G .633(nd replaced)-3.133 F 1.34(with \
+an alphabetically sorted list of \214lenames matching the pattern \(see)
+108 513.6 R F1 -.09(Pa)3.84 G(tter).09 E 3.59(nM)-.135 G(atching)-3.59 E
+F0(belo)3.59 E 3.84(w\). If)-.25 F(no)3.84 E .534
+(matching \214lenames are found, and the shell option)108 525.6 R F4
+(nullglob)3.034 E F0 .534(is not enabled, the w)3.034 F .534
+(ord is left unchanged.)-.1 F(If)5.534 E(the)108 537.6 Q F4(nullglob)
+3.284 E F0 .785(option is set, and no matches are found, the w)3.284 F
+.785(ord is remo)-.1 F -.15(ve)-.15 G 3.285(d. If).15 F(the)3.285 E F4
+(failglob)3.285 E F0 .785(shell option is)3.285 F .754(set, and no matc\
+hes are found, an error message is printed and the command is not e)108
+549.6 R -.15(xe)-.15 G 3.254(cuted. If).15 F .754(the shell)3.254 F
+(option)108 561.6 Q F4(nocaseglob)3.263 E F0 .763
+(is enabled, the match is performed without re)3.263 F -.05(ga)-.15 G
+.764(rd to the case of alphabetic characters.).05 F .039
+(When a pattern is used for pathname e)108 573.6 R .039
+(xpansion, the character)-.15 F F4 -.63(``)2.539 G -.55(.').63 G(')-.08
+E F0 .039(at the start of a name or immediately fol-)5.039 F(lo)108
+585.6 Q .81(wing a slash must be matched e)-.25 F(xplicitly)-.15 E 3.31
+(,u)-.65 G .81(nless the shell option)-3.31 F F4(dotglob)3.31 E F0 .81
+(is set.)3.31 F .81(The \214lenames)5.81 F F4 -.63(``)3.31 G -.55(.').63
+G(')-.08 E F0(and)5.81 E F4 -.63(``)108 597.6 S(..).63 E -.63('')-.55 G
+F0 1.182(must al)6.812 F -.1(wa)-.1 G 1.182(ys be matched e).1 F
+(xplicitly)-.15 E 3.682(,e)-.65 G -.15(ve)-3.932 G 3.682(ni).15 G(f)
+-3.682 E F4(dotglob)3.682 E F0 1.182(is set.)3.682 F 1.181
+(In other cases, the)6.182 F F4 -.63(``)3.681 G -.55(.').63 G(')-.08 E
+F0 1.181(character is not)6.181 F .613(treated specially)108 609.6 R
+5.613(.W)-.65 G .613
+(hen matching a pathname, the slash character must al)-5.613 F -.1(wa)
+-.1 G .614(ys be matched e).1 F .614(xplicitly by a)-.15 F .655
+(slash in the pattern, b)108 621.6 R .655(ut in other matching conte)-.2
+F .655(xts it can be matched by a special pattern character as de-)-.15
+F .719(scribed belo)108 633.6 R 3.219(wu)-.25 G(nder)-3.219 E F1 -.09
+(Pa)3.219 G(tter).09 E 2.969(nM)-.135 G(atching)-2.969 E F2(.)A F0 .719
+(See the description of)5.219 F F4(shopt)3.219 E F0(belo)3.219 E 3.22
+(wu)-.25 G(nder)-3.22 E F1 .72(SHELL B)3.22 F(UIL)-.09 E .72(TIN COM-)
+-.828 F(MANDS)108 645.6 Q F0(for a description of the)2.25 E F4
+(nocaseglob)2.5 E F0(,)A F4(nullglob)2.5 E F0(,)A F4(failglob)2.5 E F0
+2.5(,a)C(nd)-2.5 E F4(dotglob)2.5 E F0(shell options.)2.5 E(The)108
+662.4 Q F1(GLOBIGNORE)2.562 E F0 .062(shell v)2.312 F .061
+(ariable may be used to restrict the set of \214le names matching a)-.25
+F F3(pattern)3.811 E F0 5.061(.I).24 G(f)-5.061 E F1(GLO-)2.561 E
+(BIGNORE)108 674.4 Q F0 1.096(is set, each matching \214le name that al\
+so matches one of the patterns in)3.346 F F1(GLOBIGNORE)3.597 E F0 1.097
+(is re-)3.347 F(mo)108 686.4 Q -.15(ve)-.15 G 2.851(df).15 G .351
+(rom the list of matches.)-2.851 F .351(If the)5.351 F F4(nocaseglob)
+2.851 E F0 .351(option is set, the matching ag)2.851 F .351
+(ainst the patterns in)-.05 F F1(GLO-)2.85 E(BIGNORE)108 698.4 Q F0 1.48
+(is performed without re)3.73 F -.05(ga)-.15 G 1.48(rd to case.).05 F
+1.48(The \214lenames)6.48 F F4 -.63(``)3.98 G -.55(.').63 G(')-.08 E F0
+(and)6.48 E F4 -.63(``)3.98 G(..).63 E -.63('')-.55 G F0 1.481(are al)
+7.11 F -.1(wa)-.1 G 1.481(ys ignored when).1 F F1(GLOBIGNORE)108 710.4 Q
+F0 .827(is set and not null.)3.077 F(Ho)5.827 E(we)-.25 E -.15(ve)-.25 G
+1.627 -.4(r, s).15 H(etting).4 E F1(GLOBIGNORE)3.327 E F0 .827
+(to a non-null v)3.077 F .827(alue has the ef)-.25 F .827(fect of)-.25 F
+.682(enabling the)108 722.4 R F4(dotglob)3.182 E F0 .682
+(shell option, so all other \214lenames be)3.182 F .682(ginning with a)
+-.15 F F4 -.63(``)3.182 G -.55(.').63 G(')-.08 E F0 .682(will match.)
+5.682 F 2.283 -.8(To g)5.683 H .683(et the old).8 F(GNU Bash 5.1)72 768
+Q(2020 October 29)141.235 E(26)190.395 E 0 Cg EP
+%%Page: 27 27
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E(beha)108 84 Q
+1.185(vior of ignoring \214lenames be)-.2 F 1.185(ginning with a)-.15 F
+/F1 10/Times-Bold@0 SF -.63(``)3.684 G -.55(.').63 G(')-.08 E F0 3.684
+(,m)C(ak)-3.684 E(e)-.1 E F1 -.63(``)3.684 G(.*').63 E(')-.63 E F0 1.184
+(one of the patterns in)6.184 F/F2 9/Times-Bold@0 SF(GLOBIGNORE)3.684 E
+/F3 9/Times-Roman@0 SF(.)A F0(The)108 96 Q F1(dotglob)3.131 E F0 .631
+(option is disabled when)3.131 F F2(GLOBIGNORE)3.132 E F0 .632
+(is unset.)2.882 F .632(The pattern matching honors the setting of)5.632
+F(the)108 108 Q F1(extglob)2.5 E F0(shell option.)2.5 E F1 -.1(Pa)108
+124.8 S(tter).1 E 2.5(nM)-.15 G(atching)-2.5 E F0(An)108 141.6 Q 3.138
+(yc)-.15 G .638(haracter that appears in a pattern, other than the spec\
+ial pattern characters described belo)-3.138 F 1.938 -.65(w, m)-.25 H
+(atches).65 E 2.721(itself. The)108 153.6 R .221
+(NUL character may not occur in a pattern.)2.721 F 2.721(Ab)5.221 G .221
+(ackslash escapes the follo)-2.721 F .222(wing character; the es-)-.25 F
+.418(caping backslash is discarded when matching.)108 165.6 R .418
+(The special pattern characters must be quoted if the)5.418 F 2.918(ya)
+-.15 G .418(re to)-2.918 F(be matched literally)108 177.6 Q(.)-.65 E
+(The special pattern characters ha)108 194.4 Q .3 -.15(ve t)-.2 H
+(he follo).15 E(wing meanings:)-.25 E F1(*)144 211.2 Q F0 .376
+(Matches an)180 211.2 R 2.876(ys)-.15 G .376
+(tring, including the null string.)-2.876 F .376(When the)5.376 F F1
+(globstar)2.876 E F0 .377(shell option is enabled,)2.876 F(and)180 223.2
+Q F1(*)3.275 E F0 .775(is used in a pathname e)3.275 F .775
+(xpansion conte)-.15 F .775(xt, tw)-.15 F 3.275(oa)-.1 G(djacent)-3.275
+E F1(*)3.275 E F0 3.275(su)C .775(sed as a single pattern)-3.275 F 1.058
+(will match all \214les and zero or more directories and subdirectories\
+.)180 235.2 R 1.058(If follo)6.058 F 1.058(wed by a)-.25 F F1(/)3.558 E
+F0(,)A(tw)180 247.2 Q 2.5(oa)-.1 G(djacent)-2.5 E F1(*)2.5 E F0 2.5(sw)C
+(ill match only directories and subdirectories.)-2.5 E F1(?)144 259.2 Q
+F0(Matches an)180 259.2 Q 2.5(ys)-.15 G(ingle character)-2.5 E(.)-.55 E
+F1([...])144 271.2 Q F0 .579(Matches an)180 271.2 R 3.079(yo)-.15 G .579
+(ne of the enclosed characters.)-3.079 F 3.079(Ap)5.579 G .578
+(air of characters separated by a h)-3.079 F(yphen)-.05 E .684
+(denotes a)180 283.2 R/F4 10/Times-Italic@0 SF -.15(ra)3.184 G(ng).15 E
+3.184(ee)-.1 G(xpr)-3.384 E(ession)-.37 E F0 3.184(;a)C .984 -.15(ny c)
+-3.184 H .684(haracter that f).15 F .684(alls between those tw)-.1 F
+3.185(oc)-.1 G .685(haracters, inclu-)-3.185 F(si)180 295.2 Q -.15(ve)
+-.25 G 3.713(,u).15 G 1.213(sing the current locale')-3.713 F 3.712(sc)
+-.55 G 1.212(ollating sequence and character set, is matched.)-3.712 F
+1.212(If the)6.212 F 1.123(\214rst character follo)180 307.2 R 1.123
+(wing the)-.25 F F1([)3.623 E F0 1.123(is a)3.623 F F1(!)3.623 E F0
+1.124(or a)6.123 F F1(^)3.624 E F0 1.124(then an)3.624 F 3.624(yc)-.15 G
+1.124(haracter not enclosed is matched.)-3.624 F .895
+(The sorting order of characters in range e)180 319.2 R .894
+(xpressions is determined by the current locale)-.15 F .375(and the v)
+180 331.2 R .375(alues of the)-.25 F F2(LC_COLLA)2.875 E(TE)-.855 E F0
+(or)2.625 E F2(LC_ALL)2.875 E F0 .375(shell v)2.625 F .375
+(ariables, if set.)-.25 F 1.976 -.8(To o)5.376 H .376(btain the tra-).8
+F .068(ditional interpretation of range e)180 343.2 R .068
+(xpressions, where)-.15 F F1([a\255d])2.568 E F0 .067(is equi)2.567 F
+-.25(va)-.25 G .067(lent to).25 F F1([abcd])2.567 E F0 2.567(,s)C .067
+(et v)-2.567 F(alue)-.25 E .156(of the)180 355.2 R F1(LC_ALL)2.656 E F0
+.156(shell v)2.656 F .156(ariable to)-.25 F F1(C)2.657 E F0 2.657(,o)C
+2.657(re)-2.657 G .157(nable the)-2.657 F F1(globasciiranges)2.657 E F0
+.157(shell option.)2.657 F(A)5.157 E F1<ad>2.657 E F0(may)2.657 E .193(\
+be matched by including it as the \214rst or last character in the set.)
+180 367.2 R(A)5.193 E F1(])2.693 E F0 .193(may be matched by)2.693 F
+(including it as the \214rst character in the set.)180 379.2 Q -.4(Wi)
+180 397.2 S(thin).4 E F1([)3.07 E F0(and)3.07 E F1(])3.07 E F0(,)A F4
+-.15(ch)3.07 G(ar).15 E .571(acter classes)-.15 F F0 .571
+(can be speci\214ed using the syntax)3.071 F F1([:)3.071 E F4(class)A F1
+(:])A F0 3.071(,w)C(here)-3.071 E F4(class)3.071 E F0
+(is one of the follo)180 409.2 Q
+(wing classes de\214ned in the POSIX standard:)-.25 E F1 5.889
+(alnum alpha ascii blank cntrl digit graph lo)180 421.2 R 5.889
+(wer print punct space up-)-.1 F 5(per w)180 433.2 R 5(ord xdigit)-.1 F
+F0 4.289(Ac)180 445.2 S 1.789(haracter class matches an)-4.289 F 4.289
+(yc)-.15 G 1.789(haracter belonging to that class.)-4.289 F(The)6.789 E
+F1 -.1(wo)4.29 G(rd).1 E F0(character)4.29 E
+(class matches letters, digits, and the character _.)180 457.2 Q -.4(Wi)
+180 475.2 S(thin).4 E F1([)4.537 E F0(and)4.537 E F1(])4.537 E F0 4.537
+(,a)C(n)-4.537 E F4 2.037(equivalence class)4.537 F F0 2.036
+(can be speci\214ed using the syntax)4.536 F F1([=)4.536 E F4(c)A F1(=])
+A F0 4.536(,w)C(hich)-4.536 E .125(matches all characters with the same\
+ collation weight \(as de\214ned by the current locale\) as)180 487.2 R
+(the character)180 499.2 Q F4(c)2.5 E F0(.)A -.4(Wi)180 517.2 S(thin).4
+E F1([)2.5 E F0(and)2.5 E F1(])2.5 E F0 2.5(,t)C(he syntax)-2.5 E F1([.)
+2.5 E F4(symbol)A F1(.])A F0(matches the collating symbol)2.5 E F4
+(symbol)2.5 E F0(.)A .705(If the)108 534 R F1(extglob)3.205 E F0 .705
+(shell option is enabled using the)3.205 F F1(shopt)3.205 E F0 -.2(bu)
+3.205 G .704(iltin, se).2 F -.15(ve)-.25 G .704(ral e).15 F .704
+(xtended pattern matching operators)-.15 F .255(are recognized.)108 546
+R .255(In the follo)5.255 F .255(wing description, a)-.25 F F4
+(pattern-list)2.755 E F0 .255
+(is a list of one or more patterns separated by a)2.755 F F1(|)2.756 E
+F0(.)A(Composite patterns may be formed using one or more of the follo)
+108 558 Q(wing sub-patterns:)-.25 E F1(?\()144 582 Q F4(pattern-list)
+.833 E F1(\)).833 E F0(Matches zero or one occurrence of the gi)180 594
+Q -.15(ve)-.25 G 2.5(np).15 G(atterns)-2.5 E F1(*\()144 606 Q F4
+(pattern-list).833 E F1(\)).833 E F0
+(Matches zero or more occurrences of the gi)180 618 Q -.15(ve)-.25 G 2.5
+(np).15 G(atterns)-2.5 E F1(+\()144 630 Q F4(pattern-list).833 E F1(\))
+.833 E F0(Matches one or more occurrences of the gi)180 642 Q -.15(ve)
+-.25 G 2.5(np).15 G(atterns)-2.5 E F1(@\()144 654 Q F4(pattern-list).833
+E F1(\)).833 E F0(Matches one of the gi)180 666 Q -.15(ve)-.25 G 2.5(np)
+.15 G(atterns)-2.5 E F1(!\()144 678 Q F4(pattern-list).833 E F1(\)).833
+E F0(Matches an)180 690 Q(ything e)-.15 E(xcept one of the gi)-.15 E
+-.15(ve)-.25 G 2.5(np).15 G(atterns)-2.5 E .969(Complicated e)108 706.8
+R .969(xtended pattern matching ag)-.15 F .969
+(ainst long strings is slo)-.05 F 2.268 -.65(w, e)-.25 H .968
+(specially when the patterns contain).65 F .09
+(alternations and the strings contain multiple matches.)108 718.8 R .091
+(Using separate matches ag)5.091 F .091(ainst shorter strings, or us-)
+-.05 F(ing arrays of strings instead of a single long string, may be f)
+108 730.8 Q(aster)-.1 E(.)-.55 E(GNU Bash 5.1)72 768 Q(2020 October 29)
+141.235 E(27)190.395 E 0 Cg EP
+%%Page: 28 28
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(Quote Remo)87 84 Q -.1(va)-.1 G(l).1 E F0 1.113
+(After the preceding e)108 96 R 1.113
+(xpansions, all unquoted occurrences of the characters)-.15 F F1(\\)
+3.613 E F0(,)A F1<08>3.612 E F0 3.612(,a)C(nd)-3.612 E F1(")4.445 E F0
+1.112(that did not result)4.445 F(from one of the abo)108 108 Q .3 -.15
+(ve ex)-.15 H(pansions are remo).15 E -.15(ve)-.15 G(d.).15 E/F2 10.95
+/Times-Bold@0 SF(REDIRECTION)72 124.8 Q F0 .545(Before a command is e)
+108 136.8 R -.15(xe)-.15 G .545(cuted, its input and output may be).15 F
+/F3 10/Times-Italic@0 SF -.37(re)3.045 G(dir).37 E(ected)-.37 E F0 .545
+(using a special notation interpreted)3.815 F .405(by the shell.)108
+148.8 R .405(Redirection allo)5.405 F .405(ws commands' \214le handles \
+to be duplicated, opened, closed, made to refer to)-.25 F(dif)108 160.8
+Q 1.019(ferent \214les, and can change the \214les the command reads fr\
+om and writes to.)-.25 F 1.02(Redirection may also be)6.02 F .215
+(used to modify \214le handles in the current shell e)108 172.8 R -.15
+(xe)-.15 G .215(cution en).15 F 2.715(vironment. The)-.4 F(follo)2.715 E
+.215(wing redirection operators)-.25 F .862(may precede or appear an)108
+184.8 R .862(ywhere within a)-.15 F F3 .862(simple command)3.702 F F0
+.862(or may follo)4.132 F 3.362(wa)-.25 G F3(command).2 E F0 5.862(.R)
+.77 G .862(edirections are)-5.862 F(processed in the order the)108 196.8
+Q 2.5(ya)-.15 G(ppear)-2.5 E 2.5(,f)-.4 G(rom left to right.)-2.5 E .771
+(Each redirection that may be preceded by a \214le descriptor number ma\
+y instead be preceded by a w)108 213.6 R .771(ord of)-.1 F .292
+(the form {)108 225.6 R F3(varname)A F0 2.793(}. In)B .293
+(this case, for each redirection operator e)2.793 F .293
+(xcept >&- and <&-, the shell will allocate)-.15 F 3.18<618c>108 237.6 S
+.679(le descriptor greater than or equal to 10 and assign it to)-3.18 F
+F3(varname)3.179 E F0 5.679(.I)C 3.179(f>)-5.679 G .679
+(&- or <&- is preceded by {)-3.179 F F3(var)A(-)-.2 E(name)108 249.6 Q
+F0 .599(}, the v)B .599(alue of)-.25 F F3(varname)3.099 E F0 .599
+(de\214nes the \214le descriptor to close.)3.099 F .6(If {)5.6 F F3
+(varname)A F0 3.1(}i)C 3.1(ss)-3.1 G .6(upplied, the redirection)-3.1 F
+1.238(persists be)108 261.6 R 1.238(yond the scope of the command, allo)
+-.15 F 1.238(wing the shell programmer to manage the \214le descriptor)
+-.25 F(himself.)108 273.6 Q .283(In the follo)108 290.4 R .284(wing des\
+criptions, if the \214le descriptor number is omitted, and the \214rst \
+character of the redirect-)-.25 F .513(ion operator is)108 302.4 R F1(<)
+3.012 E F0 3.012(,t)C .512
+(he redirection refers to the standard input \(\214le descriptor 0\).)
+-3.012 F .512(If the \214rst character of the)5.512 F
+(redirection operator is)108 314.4 Q F1(>)2.5 E F0 2.5(,t)C
+(he redirection refers to the standard output \(\214le descriptor 1\).)
+-2.5 E .824(The w)108 331.2 R .824(ord follo)-.1 F .824
+(wing the redirection operator in the follo)-.25 F .825
+(wing descriptions, unless otherwise noted, is sub-)-.25 F .463
+(jected to brace e)108 343.2 R .463(xpansion, tilde e)-.15 F .462
+(xpansion, parameter and v)-.15 F .462(ariable e)-.25 F .462
+(xpansion, command substitution, arith-)-.15 F .866(metic e)108 355.2 R
+.866(xpansion, quote remo)-.15 F -.25(va)-.15 G .866(l, pathname e).25 F
+.867(xpansion, and w)-.15 F .867(ord splitting.)-.1 F .867(If it e)5.867
+F .867(xpands to more than one)-.15 F -.1(wo)108 367.2 S(rd,).1 E F1
+(bash)2.5 E F0(reports an error)2.5 E(.)-.55 E
+(Note that the order of redirections is signi\214cant.)108 384 Q -.15
+(Fo)5 G 2.5(re).15 G(xample, the command)-2.65 E(ls)144 400.8 Q F1(>)2.5
+E F0(dirlist 2)2.5 E F1(>&)A F0(1)A
+(directs both standard output and standard error to the \214le)108 417.6
+Q F3(dirlist)2.85 E F0 2.5(,w).68 G(hile the command)-2.5 E(ls 2)144
+434.4 Q F1(>&)A F0(1)A F1(>)2.5 E F0(dirlist)2.5 E .505
+(directs only the standard output to \214le)108 451.2 R F3(dirlist)3.355
+E F0 3.005(,b).68 G .505(ecause the standard error w)-3.005 F .505
+(as duplicated from the standard)-.1 F
+(output before the standard output w)108 463.2 Q(as redirected to)-.1 E
+F3(dirlist)2.85 E F0(.).68 E F1(Bash)108 480 Q F0 .598(handles se)3.098
+F -.15(ve)-.25 G .598(ral \214lenames specially when the).15 F 3.099(ya)
+-.15 G .599(re used in redirections, as described in the follo)-3.099 F
+(wing)-.25 E 3.478(table. If)108 492 R .978
+(the operating system on which)3.478 F F1(bash)3.478 E F0 .978
+(is running pro)3.478 F .977
+(vides these special \214les, bash will use them;)-.15 F
+(otherwise it will emulate them internally with the beha)108 504 Q
+(vior described belo)-.2 E -.65(w.)-.25 G F1(/de)144 520.8 Q(v/fd/)-.15
+E F3(fd)A F0(If)180 532.8 Q F3(fd)2.5 E F0(is a v)2.5 E(alid inte)-.25 E
+(ger)-.15 E 2.5<2c8c>-.4 G(le descriptor)-2.5 E F3(fd)2.5 E F0
+(is duplicated.)2.5 E F1(/de)144 544.8 Q(v/stdin)-.15 E F0
+(File descriptor 0 is duplicated.)180 556.8 Q F1(/de)144 568.8 Q
+(v/stdout)-.15 E F0(File descriptor 1 is duplicated.)180 580.8 Q F1(/de)
+144 592.8 Q(v/stderr)-.15 E F0(File descriptor 2 is duplicated.)180
+604.8 Q F1(/de)144 616.8 Q(v/tcp/)-.15 E F3(host)A F1(/)A F3(port)A F0
+(If)180 628.8 Q F3(host)2.996 E F0 .496(is a v)2.996 F .496
+(alid hostname or Internet address, and)-.25 F F3(port)2.997 E F0 .497
+(is an inte)2.997 F .497(ger port number or ser)-.15 F(-)-.2 E
+(vice name,)180 640.8 Q F1(bash)2.5 E F0
+(attempts to open the corresponding TCP sock)2.5 E(et.)-.1 E F1(/de)144
+652.8 Q(v/udp/)-.15 E F3(host)A F1(/)A F3(port)A F0(If)180 664.8 Q F3
+(host)2.997 E F0 .497(is a v)2.997 F .497
+(alid hostname or Internet address, and)-.25 F F3(port)2.996 E F0 .496
+(is an inte)2.996 F .496(ger port number or ser)-.15 F(-)-.2 E
+(vice name,)180 676.8 Q F1(bash)2.5 E F0
+(attempts to open the corresponding UDP sock)2.5 E(et.)-.1 E 2.5(Af)108
+693.6 S(ailure to open or create a \214le causes the redirection to f)
+-2.6 E(ail.)-.1 E .045(Redirections using \214le descriptors greater th\
+an 9 should be used with care, as the)108 710.4 R 2.546(ym)-.15 G .046
+(ay con\215ict with \214le de-)-2.546 F
+(scriptors the shell uses internally)108 722.4 Q(.)-.65 E(GNU Bash 5.1)
+72 768 Q(2020 October 29)141.235 E(28)190.395 E 0 Cg EP
+%%Page: 29 29
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(Redir)87 84 Q(ecting Input)-.18 E F0 .391
+(Redirection of input causes the \214le whose name results from the e)
+108 96 R .391(xpansion of)-.15 F/F2 10/Times-Italic@0 SF(wor)3.231 E(d)
+-.37 E F0 .391(to be opened for read-)3.661 F(ing on \214le descriptor)
+108 108 Q F2(n)2.86 E F0 2.5(,o).24 G 2.5(rt)-2.5 G
+(he standard input \(\214le descriptor 0\) if)-2.5 E F2(n)2.86 E F0
+(is not speci\214ed.)2.74 E
+(The general format for redirecting input is:)108 124.8 Q([)144 141.6 Q
+F2(n)A F0(])A F1(<)A F2(wor)A(d)-.37 E F1(Redir)87 158.4 Q
+(ecting Output)-.18 E F0 .174
+(Redirection of output causes the \214le whose name results from the e)
+108 170.4 R .175(xpansion of)-.15 F F2(wor)3.015 E(d)-.37 E F0 .175
+(to be opened for writ-)3.445 F .084(ing on \214le descriptor)108 182.4
+R F2(n)2.944 E F0 2.583(,o).24 G 2.583(rt)-2.583 G .083
+(he standard output \(\214le descriptor 1\) if)-2.583 F F2(n)2.943 E F0
+.083(is not speci\214ed.)2.823 F .083(If the \214le does not e)5.083 F
+(x-)-.15 E(ist it is created; if it does e)108 194.4 Q
+(xist it is truncated to zero size.)-.15 E
+(The general format for redirecting output is:)108 211.2 Q([)144 228 Q
+F2(n)A F0(])A F1(>)A F2(wor)A(d)-.37 E F0 .154
+(If the redirection operator is)108 244.8 R F1(>)2.654 E F0 2.654(,a)C
+.154(nd the)-2.654 F F1(noclob)2.654 E(ber)-.1 E F0 .154(option to the)
+2.654 F F1(set)2.655 E F0 -.2(bu)2.655 G .155
+(iltin has been enabled, the redirection).2 F .658(will f)108 256.8 R
+.658(ail if the \214le whose name results from the e)-.1 F .658
+(xpansion of)-.15 F F2(wor)3.158 E(d)-.37 E F0 -.15(ex)3.158 G .657
+(ists and is a re).15 F .657(gular \214le.)-.15 F .657(If the redi-)
+5.657 F .408(rection operator is)108 268.8 R F1(>|)2.909 E F0 2.909(,o)C
+2.909(rt)-2.909 G .409(he redirection operator is)-2.909 F F1(>)2.909 E
+F0 .409(and the)2.909 F F1(noclob)2.909 E(ber)-.1 E F0 .409
+(option to the)2.909 F F1(set)2.909 E F0 -.2(bu)2.909 G .409
+(iltin command).2 F(is not enabled, the redirection is attempted e)108
+280.8 Q -.15(ve)-.25 G 2.5(ni).15 G 2.5(ft)-2.5 G(he \214le named by)
+-2.5 E F2(wor)2.5 E(d)-.37 E F0 -.15(ex)2.5 G(ists.).15 E F1 -.25(Ap)87
+297.6 S(pending Redir).25 E(ected Output)-.18 E F0 .642
+(Redirection of output in this f)108 309.6 R .642
+(ashion causes the \214le whose name results from the e)-.1 F .641
+(xpansion of)-.15 F F2(wor)3.481 E(d)-.37 E F0 .641(to be)3.911 F .454
+(opened for appending on \214le descriptor)108 321.6 R F2(n)3.315 E F0
+2.955(,o).24 G 2.955(rt)-2.955 G .455
+(he standard output \(\214le descriptor 1\) if)-2.955 F F2(n)3.315 E F0
+.455(is not speci\214ed.)3.195 F(If)5.455 E(the \214le does not e)108
+333.6 Q(xist it is created.)-.15 E
+(The general format for appending output is:)108 350.4 Q([)144 367.2 Q
+F2(n)A F0(])A F1(>>)A F2(wor)A(d)-.37 E F1(Redir)87 384 Q
+(ecting Standard Output and Standard Err)-.18 E(or)-.18 E F0 .249
+(This construct allo)108 396 R .249(ws both the standard output \(\214l\
+e descriptor 1\) and the standard error output \(\214le descrip-)-.25 F
+(tor 2\) to be redirected to the \214le whose name is the e)108 408 Q
+(xpansion of)-.15 E F2(wor)2.84 E(d)-.37 E F0(.).77 E(There are tw)108
+424.8 Q 2.5(of)-.1 G
+(ormats for redirecting standard output and standard error:)-2.5 E F1
+(&>)144 441.6 Q F2(wor)A(d)-.37 E F0(and)108 453.6 Q F1(>&)144 465.6 Q
+F2(wor)A(d)-.37 E F0(Of the tw)108 482.4 Q 2.5(of)-.1 G
+(orms, the \214rst is preferred.)-2.5 E(This is semantically equi)5 E
+-.25(va)-.25 G(lent to).25 E F1(>)144 499.2 Q F2(wor)A(d)-.37 E F0(2)2.5
+E F1(>&)A F0(1)A .114(When using the second form,)108 516 R F2(wor)2.614
+E(d)-.37 E F0 .114(may not e)2.614 F .114(xpand to a number or)-.15 F F1
+<ad>2.614 E F0 5.114(.I)C 2.614(fi)-5.114 G 2.615(td)-2.614 G .115
+(oes, other redirection operators)-2.615 F(apply \(see)108 528 Q F1
+(Duplicating File Descriptors)2.5 E F0(belo)2.5 E
+(w\) for compatibility reasons.)-.25 E F1 -.25(Ap)87 544.8 S
+(pending Standard Output and Standard Err).25 E(or)-.18 E F0 .249
+(This construct allo)108 556.8 R .249(ws both the standard output \(\
+\214le descriptor 1\) and the standard error output \(\214le descrip-)
+-.25 F(tor 2\) to be appended to the \214le whose name is the e)108
+568.8 Q(xpansion of)-.15 E F2(wor)2.84 E(d)-.37 E F0(.).77 E
+(The format for appending standard output and standard error is:)108
+585.6 Q F1(&>>)144 602.4 Q F2(wor)A(d)-.37 E F0
+(This is semantically equi)108 619.2 Q -.25(va)-.25 G(lent to).25 E F1
+(>>)144 636 Q F2(wor)A(d)-.37 E F0(2)2.5 E F1(>&)A F0(1)A(\(see)108
+652.8 Q F1(Duplicating File Descriptors)2.5 E F0(belo)2.5 E(w\).)-.25 E
+F1(Her)87 669.6 Q 2.5(eD)-.18 G(ocuments)-2.5 E F0 .33(This type of red\
+irection instructs the shell to read input from the current source unti\
+l a line containing only)108 681.6 R F2(delimiter)108.35 693.6 Q F0 .615
+(\(with no trailing blanks\) is seen.)3.845 F .615
+(All of the lines read up to that point are then used as the stan-)5.615
+F(dard input \(or \214le descriptor)108 705.6 Q F2(n)2.5 E F0(if)2.5 E
+F2(n)2.5 E F0(is speci\214ed\) for a command.)2.5 E
+(The format of here-documents is:)108 722.4 Q(GNU Bash 5.1)72 768 Q
+(2020 October 29)141.235 E(29)190.395 E 0 Cg EP
+%%Page: 30 30
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E([)144 84 Q/F1 10
+/Times-Italic@0 SF(n)A F0(])A/F2 10/Times-Bold@0 SF(<<)A F0([)A F2<ad>A
+F0(])A F1(wor)A(d)-.37 E(her)164 96 Q(e-document)-.37 E(delimiter)144
+108 Q F0 .301(No parameter and v)108 124.8 R .302(ariable e)-.25 F .302
+(xpansion, command substitution, arithmetic e)-.15 F .302
+(xpansion, or pathname e)-.15 F(xpansion)-.15 E .381(is performed on)108
+136.8 R F1(wor)3.221 E(d)-.37 E F0 5.381(.I).77 G 2.881(fa)-5.381 G .681
+-.15(ny p)-2.881 H .381(art of).15 F F1(wor)3.221 E(d)-.37 E F0 .381
+(is quoted, the)3.651 F F1(delimiter)3.231 E F0 .381
+(is the result of quote remo)3.611 F -.25(va)-.15 G 2.881(lo).25 G(n)
+-2.881 E F1(wor)3.221 E(d)-.37 E F0(,).77 E .773
+(and the lines in the here-document are not e)108 148.8 R 3.274
+(xpanded. If)-.15 F F1(wor)3.274 E(d)-.37 E F0 .774
+(is unquoted, all lines of the here-document)3.274 F 1.195
+(are subjected to parameter e)108 160.8 R 1.194
+(xpansion, command substitution, and arithmetic e)-.15 F 1.194
+(xpansion, the character se-)-.15 F(quence)108 172.8 Q F2(\\<newline>)
+2.5 E F0(is ignored, and)2.5 E F2(\\)2.5 E F0
+(must be used to quote the characters)2.5 E F2(\\)2.5 E F0(,)A F2($)2.5
+E F0 2.5(,a)C(nd)-2.5 E F2<92>2.5 E F0(.)A .601
+(If the redirection operator is)108 189.6 R F2(<<\255)3.101 E F0 3.101
+(,t)C .601(hen all leading tab characters are stripped from input lines\
+ and the line)-3.101 F(containing)108 201.6 Q F1(delimiter)2.85 E F0 5
+(.T).73 G(his allo)-5 E
+(ws here-documents within shell scripts to be indented in a natural f)
+-.25 E(ashion.)-.1 E F2(Her)87 218.4 Q 2.5(eS)-.18 G(trings)-2.5 E F0
+2.5(Av)108 230.4 S(ariant of here documents, the format is:)-2.75 E([)
+144 247.2 Q F1(n)A F0(])A F2(<<<)A F1(wor)A(d)-.37 E F0(The)108 264 Q F1
+(wor)3.292 E(d)-.37 E F0(under)3.292 E .792(goes tilde e)-.18 F .792
+(xpansion, parameter and v)-.15 F .792(ariable e)-.25 F .791
+(xpansion, command substitution, arithmetic)-.15 F -.15(ex)108 276 S
+1.187(pansion, and quote remo).15 F -.25(va)-.15 G 3.687(l. P).25 F
+1.187(athname e)-.15 F 1.187(xpansion and w)-.15 F 1.187
+(ord splitting are not performed.)-.1 F 1.188(The result is)6.187 F .375
+(supplied as a single string, with a ne)108 288 R .374(wline appended, \
+to the command on its standard input \(or \214le descrip-)-.25 F(tor)108
+300 Q F1(n)2.5 E F0(if)2.5 E F1(n)2.5 E F0(is speci\214ed\).)2.5 E F2
+(Duplicating File Descriptors)87 316.8 Q F0(The redirection operator)108
+328.8 Q([)144 345.6 Q F1(n)A F0(])A F2(<&)A F1(wor)A(d)-.37 E F0 .126
+(is used to duplicate input \214le descriptors.)108 362.4 R(If)5.127 E
+F1(wor)2.967 E(d)-.37 E F0 -.15(ex)3.397 G .127
+(pands to one or more digits, the \214le descriptor denoted).15 F(by)108
+374.4 Q F1(n)3.318 E F0 .458(is made to be a cop)3.198 F 2.958(yo)-.1 G
+2.958(ft)-2.958 G .457(hat \214le descriptor)-2.958 F 5.457(.I)-.55 G
+2.957(ft)-5.457 G .457(he digits in)-2.957 F F1(wor)3.297 E(d)-.37 E F0
+.457(do not specify a \214le descriptor open)3.727 F .149
+(for input, a redirection error occurs.)108 386.4 R(If)5.149 E F1(wor)
+2.989 E(d)-.37 E F0 -.25(eva)3.419 G .149(luates to).25 F F2<ad>2.649 E
+F0 2.65<2c8c>C .15(le descriptor)-2.65 F F1(n)3.01 E F0 .15(is closed.)
+2.89 F(If)5.15 E F1(n)3.01 E F0 .15(is not speci\214ed,)2.89 F
+(the standard input \(\214le descriptor 0\) is used.)108 398.4 Q
+(The operator)108 415.2 Q([)144 432 Q F1(n)A F0(])A F2(>&)A F1(wor)A(d)
+-.37 E F0 .444
+(is used similarly to duplicate output \214le descriptors.)108 448.8 R
+(If)5.444 E F1(n)3.304 E F0 .443
+(is not speci\214ed, the standard output \(\214le descrip-)3.183 F .565
+(tor 1\) is used.)108 460.8 R .565(If the digits in)5.565 F F1(wor)3.406
+E(d)-.37 E F0 .566(do not specify a \214le descriptor open for output, \
+a redirection error oc-)3.836 F 3.204(curs. If)108 472.8 R F1(wor)3.544
+E(d)-.37 E F0 -.25(eva)3.974 G .704(luates to).25 F F2<ad>3.204 E F0
+3.204<2c8c>C .704(le descriptor)-3.204 F F1(n)3.563 E F0 .703
+(is closed.)3.443 F .703(As a special case, if)5.703 F F1(n)3.203 E F0
+.703(is omitted, and)3.203 F F1(wor)3.203 E(d)-.37 E F0(does)3.203 E
+.965(not e)108 484.8 R .965(xpand to one or more digits or)-.15 F F2<ad>
+3.465 E F0 3.466(,t)C .966
+(he standard output and standard error are redirected as described)
+-3.466 F(pre)108 496.8 Q(viously)-.25 E(.)-.65 E F2(Mo)87 513.6 Q
+(ving File Descriptors)-.1 E F0(The redirection operator)108 525.6 Q([)
+144 542.4 Q F1(n)A F0(])A F2(<&)A F1(digit)A F2<ad>A F0(mo)108 559.2 Q
+-.15(ve)-.15 G 3.018(st).15 G .518(he \214le descriptor)-3.018 F F1
+(digit)3.018 E F0 .518(to \214le descriptor)3.018 F F1(n)3.378 E F0
+3.018(,o).24 G 3.018(rt)-3.018 G .517
+(he standard input \(\214le descriptor 0\) if)-3.018 F F1(n)3.017 E F0
+.517(is not speci-)3.017 F(\214ed.)108 571.2 Q F1(digit)5 E F0
+(is closed after being duplicated to)2.5 E F1(n)2.5 E F0(.)A(Similarly)
+108 588 Q 2.5(,t)-.65 G(he redirection operator)-2.5 E([)144 604.8 Q F1
+(n)A F0(])A F2(>&)A F1(digit)A F2<ad>A F0(mo)108 621.6 Q -.15(ve)-.15 G
+2.767(st).15 G .267(he \214le descriptor)-2.767 F F1(digit)2.767 E F0
+.267(to \214le descriptor)2.767 F F1(n)3.127 E F0 2.767(,o).24 G 2.767
+(rt)-2.767 G .268(he standard output \(\214le descriptor 1\) if)-2.767 F
+F1(n)2.768 E F0 .268(is not speci-)2.768 F(\214ed.)108 633.6 Q F2
+(Opening File Descriptors f)87 650.4 Q(or Reading and Writing)-.25 E F0
+(The redirection operator)108 662.4 Q([)144 679.2 Q F1(n)A F0(])A F2(<>)
+A F1(wor)A(d)-.37 E F0 .518(causes the \214le whose name is the e)108
+696 R .518(xpansion of)-.15 F F1(wor)3.358 E(d)-.37 E F0 .518
+(to be opened for both reading and writing on \214le de-)3.788 F
+(scriptor)108 708 Q F1(n)2.86 E F0 2.5(,o).24 G 2.5(ro)-2.5 G 2.5<6e8c>
+-2.5 G(le descriptor 0 if)-2.5 E F1(n)2.86 E F0(is not speci\214ed.)2.74
+E(If the \214le does not e)5 E(xist, it is created.)-.15 E(GNU Bash 5.1)
+72 768 Q(2020 October 29)141.235 E(30)190.395 E 0 Cg EP
+%%Page: 31 31
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10.95
+/Times-Bold@0 SF(ALIASES)72 84 Q/F2 10/Times-Italic@0 SF(Aliases)108 96
+Q F0(allo)3.173 E 3.173(was)-.25 G .674(tring to be substituted for a w)
+-3.173 F .674(ord when it is used as the \214rst w)-.1 F .674
+(ord of a simple command.)-.1 F .394(The shell maintains a list of alia\
+ses that may be set and unset with the)108 108 R/F3 10/Times-Bold@0 SF
+(alias)2.893 E F0(and)2.893 E F3(unalias)2.893 E F0 -.2(bu)2.893 G .393
+(iltin commands).2 F(\(see)108 120 Q/F4 9/Times-Bold@0 SF 1.979(SHELL B)
+4.479 F(UIL)-.09 E 1.979(TIN COMMANDS)-.828 F F0(belo)4.229 E 4.48
+(w\). The)-.25 F 1.98(\214rst w)4.48 F 1.98
+(ord of each simple command, if unquoted, is)-.1 F(check)108 132 Q .473
+(ed to see if it has an alias.)-.1 F .473(If so, that w)5.473 F .472
+(ord is replaced by the te)-.1 F .472(xt of the alias.)-.15 F .472
+(The characters)5.472 F F3(/)2.972 E F0(,)A F3($)2.972 E F0(,)A F3<92>
+2.972 E F0(,)A(and)108 144 Q F3(=)3.611 E F0 1.111(and an)3.611 F 3.611
+(yo)-.15 G 3.611(ft)-3.611 G 1.111(he shell)-3.611 F F2(metac)3.612 E
+(har)-.15 E(acter)-.15 E(s)-.1 E F0 1.112
+(or quoting characters listed abo)3.612 F 1.412 -.15(ve m)-.15 H 1.112
+(ay not appear in an alias).15 F 3.62(name. The)108 156 R 1.12
+(replacement te)3.62 F 1.119(xt may contain an)-.15 F 3.619(yv)-.15 G
+1.119(alid shell input, including shell metacharacters.)-3.869 F 1.119
+(The \214rst)6.119 F -.1(wo)108 168 S .513(rd of the replacement te).1 F
+.513(xt is tested for aliases, b)-.15 F .513(ut a w)-.2 F .514
+(ord that is identical to an alias being e)-.1 F .514(xpanded is)-.15 F
+.296(not e)108 180 R .296(xpanded a second time.)-.15 F .296
+(This means that one may alias)5.296 F F3(ls)2.796 E F0(to)2.796 E F3
+.296(ls \255F)2.796 F F0 2.796(,f)C .295(or instance, and)-2.796 F F3
+(bash)2.795 E F0 .295(does not try)2.795 F .528(to recursi)108 192 R
+-.15(ve)-.25 G .528(ly e).15 F .528(xpand the replacement te)-.15 F
+3.028(xt. If)-.15 F .528(the last character of the alias v)3.028 F .529
+(alue is a)-.25 F F2(blank)3.299 E F0 3.029(,t).67 G .529(hen the ne)
+-3.029 F(xt)-.15 E(command w)108 204 Q(ord follo)-.1 E
+(wing the alias is also check)-.25 E(ed for alias e)-.1 E(xpansion.)-.15
+E(Aliases are created and listed with the)108 220.8 Q F3(alias)2.5 E F0
+(command, and remo)2.5 E -.15(ve)-.15 G 2.5(dw).15 G(ith the)-2.5 E F3
+(unalias)2.5 E F0(command.)2.5 E .284
+(There is no mechanism for using ar)108 237.6 R .284
+(guments in the replacement te)-.18 F 2.784(xt. If)-.15 F(ar)2.784 E
+.284(guments are needed, a shell func-)-.18 F(tion should be used \(see)
+108 249.6 Q F4(FUNCTIONS)2.5 E F0(belo)2.25 E(w\).)-.25 E .282
+(Aliases are not e)108 266.4 R .282
+(xpanded when the shell is not interacti)-.15 F -.15(ve)-.25 G 2.782(,u)
+.15 G .282(nless the)-2.782 F F3(expand_aliases)2.783 E F0 .283
+(shell option is set us-)2.783 F(ing)108 278.4 Q F3(shopt)2.5 E F0
+(\(see the description of)2.5 E F3(shopt)2.5 E F0(under)2.5 E F4
+(SHELL B)2.5 E(UIL)-.09 E(TIN COMMANDS)-.828 E F0(belo)2.25 E(w\).)-.25
+E .436
+(The rules concerning the de\214nition and use of aliases are some)108
+295.2 R .435(what confusing.)-.25 F F3(Bash)5.435 E F0(al)2.935 E -.1
+(wa)-.1 G .435(ys reads at least).1 F .67
+(one complete line of input, and all lines that mak)108 307.2 R 3.17(eu)
+-.1 G 3.17(pac)-3.17 G .67(ompound command, before e)-3.17 F -.15(xe)
+-.15 G .67(cuting an).15 F 3.17(yo)-.15 G 3.17(ft)-3.17 G(he)-3.17 E
+1.059(commands on that line or the compound command.)108 319.2 R 1.059
+(Aliases are e)6.059 F 1.058(xpanded when a command is read, not)-.15 F
+.074(when it is e)108 331.2 R -.15(xe)-.15 G 2.574(cuted. Therefore,).15
+F .075(an alias de\214nition appearing on the same line as another comm\
+and does not)2.574 F(tak)108 343.2 Q 2.838(ee)-.1 G -.25(ff)-2.838 G
+.338(ect until the ne).25 F .338(xt line of input is read.)-.15 F .337
+(The commands follo)5.337 F .337
+(wing the alias de\214nition on that line are)-.25 F .551(not af)108
+355.2 R .551(fected by the ne)-.25 F 3.051(wa)-.25 G 3.051(lias. This)
+-3.051 F(beha)3.051 E .551(vior is also an issue when functions are e)
+-.2 F -.15(xe)-.15 G 3.051(cuted. Aliases).15 F .552(are e)3.052 F(x-)
+-.15 E .426(panded when a function de\214nition is read, not when the f\
+unction is e)108 367.2 R -.15(xe)-.15 G .425
+(cuted, because a function de\214nition).15 F .403(is itself a command.)
+108 379.2 R .403
+(As a consequence, aliases de\214ned in a function are not a)5.403 F
+-.25(va)-.2 G .404(ilable until after that func-).25 F .862(tion is e)
+108 391.2 R -.15(xe)-.15 G 3.362(cuted. T).15 F 3.362(ob)-.8 G 3.362(es)
+-3.362 G .862(afe, al)-3.362 F -.1(wa)-.1 G .862
+(ys put alias de\214nitions on a separate line, and do not use).1 F F3
+(alias)3.362 E F0 .862(in com-)3.362 F(pound commands.)108 403.2 Q -.15
+(Fo)108 420 S 2.5(ra).15 G(lmost e)-2.5 E -.15(ve)-.25 G
+(ry purpose, aliases are superseded by shell functions.).15 E F1
+(FUNCTIONS)72 436.8 Q F0 3.467(As)108 448.8 S .967
+(hell function, de\214ned as described abo)-3.467 F 1.267 -.15(ve u)-.15
+H(nder).15 E F4 .967(SHELL GRAMMAR)3.467 F/F5 9/Times-Roman@0 SF(,)A F0
+.968(stores a series of commands for)3.217 F 1.002(later e)108 460.8 R
+-.15(xe)-.15 G 3.502(cution. When).15 F 1.002(the name of a shell funct\
+ion is used as a simple command name, the list of com-)3.502 F .315
+(mands associated with that function name is e)108 472.8 R -.15(xe)-.15
+G 2.816(cuted. Functions).15 F .316(are e)2.816 F -.15(xe)-.15 G .316
+(cuted in the conte).15 F .316(xt of the current)-.15 F .036
+(shell; no ne)108 484.8 R 2.536(wp)-.25 G .036
+(rocess is created to interpret them \(contrast this with the e)-2.536 F
+-.15(xe)-.15 G .036(cution of a shell script\).).15 F .035(When a)5.035
+F .639(function is e)108 496.8 R -.15(xe)-.15 G .639(cuted, the ar).15 F
+.639
+(guments to the function become the positional parameters during its e)
+-.18 F -.15(xe)-.15 G(cution.).15 E .533(The special parameter)108 508.8
+R F3(#)3.033 E F0 .532(is updated to re\215ect the change.)3.033 F .532
+(Special parameter)5.532 F F3(0)3.032 E F0 .532(is unchanged.)3.032 F
+.532(The \214rst ele-)5.532 F(ment of the)108 520.8 Q F4(FUNCN)2.5 E
+(AME)-.18 E F0 -.25(va)2.25 G
+(riable is set to the name of the function while the function is e).25 E
+-.15(xe)-.15 G(cuting.).15 E 1.25(All other aspects of the shell e)108
+537.6 R -.15(xe)-.15 G 1.25(cution en).15 F 1.25
+(vironment are identical between a function and its caller with)-.4 F
+1.215(these e)108 549.6 R 1.215(xceptions: the)-.15 F F4(DEB)3.715 E(UG)
+-.09 E F0(and)3.465 E F3(RETURN)3.715 E F0 1.215
+(traps \(see the description of the)3.715 F F3(trap)3.714 E F0 -.2(bu)
+3.714 G 1.214(iltin under).2 F F4(SHELL)3.714 E -.09(BU)108 561.6 S(IL)
+.09 E .478(TIN COMMANDS)-.828 F F0(belo)2.728 E .479
+(w\) are not inherited unless the function has been gi)-.25 F -.15(ve)
+-.25 G 2.979(nt).15 G(he)-2.979 E F3(trace)2.979 E F0(attrib)2.979 E
+.479(ute \(see)-.2 F .421(the description of the)108 573.6 R F4(declar)
+2.92 E(e)-.162 E F0 -.2(bu)2.67 G .42(iltin belo).2 F .42(w\) or the)
+-.25 F F3 .42(\255o functrace)2.92 F F0 .42
+(shell option has been enabled with the)2.92 F F3(set)2.92 E F0 -.2(bu)
+108 585.6 S .071(iltin \(in which case all functions inherit the).2 F F3
+(DEB)2.572 E(UG)-.1 E F0(and)2.572 E F3(RETURN)2.572 E F0 .072
+(traps\), and the)2.572 F F4(ERR)2.572 E F0 .072(trap is not inher)2.322
+F(-)-.2 E(ited unless the)108 597.6 Q F3(\255o errtrace)2.5 E F0
+(shell option has been enabled.)2.5 E -1.11(Va)108 614.4 S .656
+(riables local to the function may be declared with the)1.11 F F3(local)
+3.155 E F0 -.2(bu)3.155 G .655(iltin command.).2 F(Ordinarily)5.655 E
+3.155(,v)-.65 G .655(ariables and)-3.405 F .05(their v)108 626.4 R .05
+(alues are shared between the function and its caller)-.25 F 5.051(.I)
+-.55 G 2.551(fav)-5.051 G .051(ariable is declared)-2.801 F F3(local)
+2.551 E F0 2.551(,t)C .051(he v)-2.551 F(ariable')-.25 E 2.551(sv)-.55 G
+(isi-)-2.551 E 1.186(ble scope is restricted to that function and its c\
+hildren \(including the functions it calls\).)108 638.4 R 1.185(Local v)
+6.185 F(ariables)-.25 E("shado)108 650.4 Q .154(w" v)-.25 F .154
+(ariables with the same name declared at pre)-.25 F .155(vious scopes.)
+-.25 F -.15(Fo)5.155 G 2.655(ri).15 G .155(nstance, a local v)-2.655 F
+.155(ariable declared)-.25 F .67(in a function hides a global v)108
+662.4 R .669(ariable of the same name: references and assignments refer\
+ to the local v)-.25 F(ari-)-.25 E .688(able, lea)108 674.4 R .688
+(ving the global v)-.2 F .688(ariable unmodi\214ed.)-.25 F .688
+(When the function returns, the global v)5.688 F .688
+(ariable is once ag)-.25 F(ain)-.05 E(visible.)108 686.4 Q .727
+(The shell uses)108 703.2 R F2 .727(dynamic scoping)3.227 F F0 .726
+(to control a v)3.227 F(ariable')-.25 E 3.226(sv)-.55 G .726
+(isibility within functions.)-3.226 F -.4(Wi)5.726 G .726
+(th dynamic scoping,).4 F .007(visible v)108 715.2 R .007
+(ariables and their v)-.25 F .007
+(alues are a result of the sequence of function calls that caused e)-.25
+F -.15(xe)-.15 G .008(cution to reach).15 F .814(the current function.)
+108 727.2 R .813(The v)5.814 F .813(alue of a v)-.25 F .813
+(ariable that a function sees depends on its v)-.25 F .813
+(alue within its caller)-.25 F 3.313(,i)-.4 G(f)-3.313 E(GNU Bash 5.1)72
+768 Q(2020 October 29)141.235 E(31)190.395 E 0 Cg EP
+%%Page: 32 32
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E(an)108 84 Q 2.116
+-.65(y, w)-.15 H .816
+(hether that caller is the "global" scope or another shell function.).65
+F .817(This is also the v)5.816 F .817(alue that a local)-.25 F -.25(va)
+108 96 S(riable declaration "shado).25 E(ws", and the v)-.25 E
+(alue that is restored when the function returns.)-.25 E -.15(Fo)108
+112.8 S 2.724(re).15 G .224(xample, if a v)-2.874 F(ariable)-.25 E/F1 10
+/Times-Italic@0 SF(var)2.724 E F0 .223(is declared as local in function)
+2.724 F F1(func1)2.723 E F0 2.723(,a)C(nd)-2.723 E F1(func1)2.723 E F0
+.223(calls another function)2.723 F F1(func2)2.723 E F0(,)A .463
+(references to)108 124.8 R F1(var)2.963 E F0 .463(made from within)2.963
+F F1(func2)2.963 E F0 .463(will resolv)2.963 F 2.964(et)-.15 G 2.964(ot)
+-2.964 G .464(he local v)-2.964 F(ariable)-.25 E F1(var)2.964 E F0(from)
+2.964 E F1(func1)2.964 E F0 2.964(,s)C(hado)-2.964 E .464(wing an)-.25 F
+(y)-.15 E(global v)108 136.8 Q(ariable named)-.25 E F1(var)2.5 E F0(.)A
+(The)108 153.6 Q/F2 10/Times-Bold@0 SF(unset)2.983 E F0 -.2(bu)2.983 G
+.483(iltin also acts using the same dynamic scope: if a v).2 F .482
+(ariable is local to the current scope,)-.25 F F2(unset)2.982 E F0 .19
+(will unset it; otherwise the unset will refer to the v)108 165.6 R .19
+(ariable found in an)-.25 F 2.69(yc)-.15 G .19
+(alling scope as described abo)-2.69 F -.15(ve)-.15 G 5.19(.I).15 G(f)
+-5.19 E 2.721(av)108 177.6 S .221(ariable at the current local scope is\
+ unset, it will remain so until it is reset in that scope or until the \
+func-)-2.971 F .013(tion returns.)108 189.6 R .013
+(Once the function returns, an)5.013 F 2.513(yi)-.15 G .014
+(nstance of the v)-2.513 F .014(ariable at a pre)-.25 F .014
+(vious scope will become visible.)-.25 F .567(If the unset acts on a v)
+108 201.6 R .566(ariable at a pre)-.25 F .566(vious scope, an)-.25 F
+3.066(yi)-.15 G .566(nstance of a v)-3.066 F .566
+(ariable with that name that had been)-.25 F(shado)108 213.6 Q
+(wed will become visible.)-.25 E(The)108 230.4 Q F2(FUNCNEST)3.528 E F0
+-.25(va)3.528 G 1.028(riable, if set to a numeric v).25 F 1.028
+(alue greater than 0, de\214nes a maximum function nesting)-.25 F(le)108
+242.4 Q -.15(ve)-.25 G 2.5(l. Function).15 F(in)2.5 E -.2(vo)-.4 G
+(cations that e).2 E(xceed the limit cause the entire command to abort.)
+-.15 E .044(If the b)108 259.2 R .043(uiltin command)-.2 F F2 -.18(re)
+2.543 G(tur).18 E(n)-.15 E F0 .043(is e)2.543 F -.15(xe)-.15 G .043
+(cuted in a function, the function completes and e).15 F -.15(xe)-.15 G
+.043(cution resumes with).15 F 1.011(the ne)108 271.2 R 1.011
+(xt command after the function call.)-.15 F(An)6.011 E 3.511(yc)-.15 G
+1.011(ommand associated with the)-3.511 F F2(RETURN)3.512 E F0 1.012
+(trap is e)3.512 F -.15(xe)-.15 G(cuted).15 E .214(before e)108 283.2 R
+-.15(xe)-.15 G .214(cution resumes.).15 F .213
+(When a function completes, the v)5.214 F .213
+(alues of the positional parameters and the spe-)-.25 F(cial parameter)
+108 295.2 Q F2(#)2.5 E F0(are restored to the v)2.5 E(alues the)-.25 E
+2.5(yh)-.15 G(ad prior to the function')-2.5 E 2.5(se)-.55 G -.15(xe)
+-2.65 G(cution.).15 E 1.358
+(Function names and de\214nitions may be listed with the)108 312 R F2
+<ad66>3.858 E F0 1.358(option to the)3.858 F F2(declar)3.858 E(e)-.18 E
+F0(or)3.859 E F2(typeset)3.859 E F0 -.2(bu)3.859 G 1.359(iltin com-).2 F
+3.39(mands. The)108 324 R F2<ad46>3.39 E F0 .89(option to)3.39 F F2
+(declar)3.39 E(e)-.18 E F0(or)3.39 E F2(typeset)3.39 E F0 .89
+(will list the function names only \(and optionally the source)3.39 F
+.326(\214le and line number)108 336 R 2.826(,i)-.4 G 2.826(ft)-2.826 G
+(he)-2.826 E F2(extdeb)2.826 E(ug)-.2 E F0 .326
+(shell option is enabled\).)2.826 F .327(Functions may be e)5.327 F .327
+(xported so that subshells)-.15 F 1.298(automatically ha)108 348 R 1.598
+-.15(ve t)-.2 H 1.298(hem de\214ned with the).15 F F2<ad66>3.798 E F0
+1.298(option to the)3.798 F F2(export)3.797 E F0 -.2(bu)3.797 G 3.797
+(iltin. A).2 F 1.297(function de\214nition may be)3.797 F
+(deleted using the)108 360 Q F2<ad66>2.5 E F0(option to the)2.5 E F2
+(unset)2.5 E F0 -.2(bu)2.5 G(iltin.).2 E .371(Functions may be recursi)
+108 376.8 R -.15(ve)-.25 G 5.371(.T).15 G(he)-5.371 E F2(FUNCNEST)2.871
+E F0 -.25(va)2.871 G .371
+(riable may be used to limit the depth of the function call).25 F .323
+(stack and restrict the number of function in)108 388.8 R -.2(vo)-.4 G
+2.822(cations. By).2 F(def)2.822 E .322
+(ault, no limit is imposed on the number of re-)-.1 F(cursi)108 400.8 Q
+.3 -.15(ve c)-.25 H(alls.).15 E/F3 10.95/Times-Bold@0 SF(ARITHMETIC EV)
+72 417.6 Q(ALU)-1.478 E -1.04(AT)-.657 G(ION)1.04 E F0 1.088
+(The shell allo)108 429.6 R 1.088(ws arithmetic e)-.25 F 1.089
+(xpressions to be e)-.15 F -.25(va)-.25 G 1.089
+(luated, under certain circumstances \(see the).25 F F2(let)3.589 E F0
+(and)3.589 E F2(de-)3.589 E(clar)108 441.6 Q(e)-.18 E F0 -.2(bu)3.453 G
+.953(iltin commands, the).2 F F2(\(\()3.453 E F0 .952
+(compound command, and)3.452 F F2 .952(Arithmetic Expansion)3.452 F F0
+3.452(\). Ev)B .952(aluation is done in)-.25 F<8c78>108 453.6 Q 1.057
+(ed-width inte)-.15 F 1.057(gers with no check for o)-.15 F -.15(ve)-.15
+G(r\215o).15 E 2.357 -.65(w, t)-.25 H 1.057(hough di).65 F 1.057
+(vision by 0 is trapped and \215agged as an error)-.25 F(.)-.55 E .829
+(The operators and their precedence, associati)108 465.6 R(vity)-.25 E
+3.329(,a)-.65 G .829(nd v)-3.329 F .829
+(alues are the same as in the C language.)-.25 F .828(The fol-)5.828 F
+(lo)108 477.6 Q .439(wing list of operators is grouped into le)-.25 F
+-.15(ve)-.25 G .439(ls of equal-precedence operators.).15 F .44(The le)
+5.44 F -.15(ve)-.25 G .44(ls are listed in order).15 F
+(of decreasing precedence.)108 489.6 Q F1(id)108 506.4 Q F2(++)A F1(id)
+2.5 E F2<adad>A F0 -.25(va)144 518.4 S
+(riable post-increment and post-decrement).25 E F2 2.5<ad2b>108 530.4 S
+F0(unary minus and plus)144 530.4 Q F2(++)108 542.4 Q F1(id)A F2<adad>
+2.5 E F1(id)A F0 -.25(va)144 554.4 S
+(riable pre-increment and pre-decrement).25 E F2 2.5(!~)108 566.4 S F0
+(logical and bitwise ne)144 566.4 Q -.05(ga)-.15 G(tion).05 E F2(**)108
+578.4 Q F0 -.15(ex)144 578.4 S(ponentiation).15 E F2 2.5(*/%)108 590.4 S
+F0(multiplication, di)144 590.4 Q(vision, remainder)-.25 E F2 2.5<2bad>
+108 602.4 S F0(addition, subtraction)144 602.4 Q F2(<< >>)108 614.4 Q F0
+(left and right bitwise shifts)144 614.4 Q F2(<= >= < >)108 626.4 Q F0
+(comparison)144 638.4 Q F2(== !=)108 650.4 Q F0(equality and inequality)
+144 650.4 Q F2(&)108 662.4 Q F0(bitwise AND)144 662.4 Q F2(^)108 674.4 Q
+F0(bitwise e)144 674.4 Q(xclusi)-.15 E .3 -.15(ve O)-.25 H(R).15 E F2(|)
+108 686.4 Q F0(bitwise OR)144 686.4 Q F2(&&)108 698.4 Q F0(logical AND)
+144 698.4 Q F2(||)108 710.4 Q F0(logical OR)144 710.4 Q(GNU Bash 5.1)72
+768 Q(2020 October 29)141.235 E(32)190.395 E 0 Cg EP
+%%Page: 33 33
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10
+/Times-Italic@0 SF -.2(ex)108 84 S(pr).2 E/F2 10/Times-Bold@0 SF(?)A F1
+-.2(ex)C(pr).2 E F2(:)A F1 -.2(ex)C(pr).2 E F0(conditional operator)144
+96 Q F2 2.5(=*)108 108 S 2.5(=/)-2.5 G 2.5(=%)-2.5 G 2.5(=+)-2.5 G 2.5
+<3dad>-2.5 G 2.5(=<)-2.5 G(<= >>= &= ^= |=)-2.5 E F0(assignment)144 120
+Q F1 -.2(ex)108 132 S(pr1).2 E F2(,)2.5 E F1 -.2(ex)2.5 G(pr2).2 E F0
+(comma)144 144 Q .68(Shell v)108 160.8 R .68(ariables are allo)-.25 F
+.68(wed as operands; parameter e)-.25 F .68
+(xpansion is performed before the e)-.15 F .68(xpression is e)-.15 F
+-.25(va)-.25 G(lu-).25 E 3.507(ated. W)108 172.8 R 1.007(ithin an e)-.4
+F 1.007(xpression, shell v)-.15 F 1.007
+(ariables may also be referenced by name without using the parameter)
+-.25 F -.15(ex)108 184.8 S .165(pansion syntax.).15 F 2.665(As)5.165 G
+.165(hell v)-2.665 F .165(ariable that is null or unset e)-.25 F -.25
+(va)-.25 G .165(luates to 0 when referenced by name without us-).25 F
+.42(ing the parameter e)108 196.8 R .42(xpansion syntax.)-.15 F .42
+(The v)5.42 F .421(alue of a v)-.25 F .421(ariable is e)-.25 F -.25(va)
+-.25 G .421(luated as an arithmetic e).25 F .421(xpression when)-.15 F
+.154(it is referenced, or when a v)108 208.8 R .154
+(ariable which has been gi)-.25 F -.15(ve)-.25 G 2.654(nt).15 G(he)
+-2.654 E F1(inte)2.654 E -.1(ge)-.4 G(r).1 E F0(attrib)2.654 E .153
+(ute using)-.2 F F2(declar)2.653 E 2.653<65ad>-.18 G(i)-2.653 E F0 .153
+(is assigned a)2.653 F -.25(va)108 220.8 S 2.857(lue. A).25 F .357
+(null v)2.857 F .357(alue e)-.25 F -.25(va)-.25 G .357(luates to 0.).25
+F 2.857(As)5.357 G .357(hell v)-2.857 F .357(ariable need not ha)-.25 F
+.657 -.15(ve i)-.2 H(ts).15 E F1(inte)2.857 E -.1(ge)-.4 G(r).1 E F0
+(attrib)2.857 E .357(ute turned on to be used)-.2 F(in an e)108 232.8 Q
+(xpression.)-.15 E(Inte)108 249.6 Q .518(ger constants follo)-.15 F
+3.018(wt)-.25 G .518(he C language de\214nition, without suf)-3.018 F
+<8c78>-.25 E .517(es or character constants.)-.15 F .517(Constants with)
+5.517 F 3.282(al)108 261.6 S .782
+(eading 0 are interpreted as octal numbers.)-3.282 F 3.283(Al)5.782 G
+.783(eading 0x or 0X denotes he)-3.283 F 3.283(xadecimal. Otherwise,)
+-.15 F(num-)3.283 E .816(bers tak)108 273.6 R 3.316(et)-.1 G .816
+(he form [)-3.316 F F1(base#)A F0 .815(]n, where the optional)B F1(base)
+3.315 E F0 .815(is a decimal number between 2 and 64 representing)3.315
+F .349(the arithmetic base, and)108 285.6 R F1(n)2.849 E F0 .349
+(is a number in that base.)2.849 F(If)5.35 E F1(base#)2.85 E F0 .35
+(is omitted, then base 10 is used.)2.85 F .35(When speci-)5.35 F(fying)
+108 297.6 Q F1(n)2.975 E F0 2.975(,i)C 2.975(fan)-2.975 G .474(on-digit\
+ is required, the digits greater than 9 are represented by the lo)-2.975
+F .474(wercase letters, the up-)-.25 F .518
+(percase letters, @, and _, in that order)108 309.6 R 5.518(.I)-.55 G(f)
+-5.518 E F1(base)3.018 E F0 .518(is less than or equal to 36, lo)3.018 F
+.518(wercase and uppercase letters)-.25 F
+(may be used interchangeably to represent numbers between 10 and 35.)108
+321.6 Q .235(Operators are e)108 338.4 R -.25(va)-.25 G .235
+(luated in order of precedence.).25 F(Sub-e)5.234 E .234
+(xpressions in parentheses are e)-.15 F -.25(va)-.25 G .234
+(luated \214rst and may).25 F -.15(ove)108 350.4 S
+(rride the precedence rules abo).15 E -.15(ve)-.15 G(.).15 E/F3 10.95
+/Times-Bold@0 SF(CONDITION)72 367.2 Q(AL EXPRESSIONS)-.219 E F0 .255
+(Conditional e)108 379.2 R .255(xpressions are used by the)-.15 F F2([[)
+2.755 E F0 .255(compound command and the)2.755 F F2(test)2.755 E F0(and)
+2.755 E F2([)2.756 E F0 -.2(bu)2.756 G .256(iltin commands to test).2 F
+.134(\214le attrib)108 391.2 R .134
+(utes and perform string and arithmetic comparisons.)-.2 F(The)5.133 E
+F2(test)2.633 E F0(and)2.633 E F2([)2.633 E F0 .133
+(commands determine their be-)2.633 F(ha)108 403.2 Q .197
+(vior based on the number of ar)-.2 F .198
+(guments; see the descriptions of those commands for an)-.18 F 2.698(yo)
+-.15 G .198(ther command-)-2.698 F(speci\214c actions.)108 415.2 Q .235
+(Expressions are formed from the follo)108 432 R .234
+(wing unary or binary primaries.)-.25 F F2(Bash)5.234 E F0 .234
+(handles se)2.734 F -.15(ve)-.25 G .234(ral \214lenames spe-).15 F .424
+(cially when the)108 444 R 2.924(ya)-.15 G .424(re used in e)-2.924 F
+2.925(xpressions. If)-.15 F .425(the operating system on which)2.925 F
+F2(bash)2.925 E F0 .425(is running pro)2.925 F .425(vides these)-.15 F
+.345(special \214les, bash will use them; otherwise it will emulate the\
+m internally with this beha)108 456 R .344(vior: If an)-.2 F(y)-.15 E F1
+(\214le)2.844 E F0(ar)2.844 E(-)-.2 E .805
+(gument to one of the primaries is of the form)108 468 R F1(/de)3.305 E
+(v/fd/n)-.15 E F0 3.306(,t)C .806(hen \214le descriptor)-3.306 F F1(n)
+3.306 E F0 .806(is check)3.306 F 3.306(ed. If)-.1 F(the)3.306 E F1
+(\214le)3.306 E F0(ar)3.306 E(gu-)-.18 E .03
+(ment to one of the primaries is one of)108 480 R F1(/de)2.53 E(v/stdin)
+-.15 E F0(,)A F1(/de)2.529 E(v/stdout)-.15 E F0 2.529(,o)C(r)-2.529 E F1
+(/de)2.529 E(v/stderr)-.15 E F0 2.529<2c8c>C .029
+(le descriptor 0, 1, or 2, respec-)-2.529 F(ti)108 492 Q -.15(ve)-.25 G
+(ly).15 E 2.5(,i)-.65 G 2.5(sc)-2.5 G(heck)-2.5 E(ed.)-.1 E .721
+(Unless otherwise speci\214ed, primaries that operate on \214les follo)
+108 508.8 R 3.221(ws)-.25 G .722(ymbolic links and operate on the tar)
+-3.221 F(get)-.18 E(of the link, rather than the link itself.)108 520.8
+Q 1.096(When used with)108 538.8 R F2([[)3.596 E F0 3.596(,t)C(he)-3.596
+E F2(<)3.596 E F0(and)3.595 E F2(>)3.595 E F0 1.095(operators sort le)
+3.595 F 1.095(xicographically using the current locale.)-.15 F(The)6.095
+E F2(test)3.595 E F0(com-)3.595 E(mand sorts using ASCII ordering.)108
+550.8 Q F2<ad61>108 574.8 Q F1(\214le)2.5 E F0 -.35(Tr)144 574.8 S
+(ue if).35 E F1(\214le)2.5 E F0 -.15(ex)2.5 G(ists.).15 E F2<ad62>108
+586.8 Q F1(\214le)2.5 E F0 -.35(Tr)144 586.8 S(ue if).35 E F1(\214le)2.5
+E F0 -.15(ex)2.5 G(ists and is a block special \214le.).15 E F2<ad63>108
+598.8 Q F1(\214le)2.5 E F0 -.35(Tr)144 598.8 S(ue if).35 E F1(\214le)2.5
+E F0 -.15(ex)2.5 G(ists and is a character special \214le.).15 E F2
+<ad64>108 610.8 Q F1(\214le)2.5 E F0 -.35(Tr)144 610.8 S(ue if).35 E F1
+(\214le)2.5 E F0 -.15(ex)2.5 G(ists and is a directory).15 E(.)-.65 E F2
+<ad65>108 622.8 Q F1(\214le)2.5 E F0 -.35(Tr)144 622.8 S(ue if).35 E F1
+(\214le)2.5 E F0 -.15(ex)2.5 G(ists.).15 E F2<ad66>108 634.8 Q F1
+(\214le)2.5 E F0 -.35(Tr)144 634.8 S(ue if).35 E F1(\214le)2.5 E F0 -.15
+(ex)2.5 G(ists and is a re).15 E(gular \214le.)-.15 E F2<ad67>108 646.8
+Q F1(\214le)2.5 E F0 -.35(Tr)144 646.8 S(ue if).35 E F1(\214le)2.5 E F0
+-.15(ex)2.5 G(ists and is set-group-id.).15 E F2<ad68>108 658.8 Q F1
+(\214le)2.5 E F0 -.35(Tr)144 658.8 S(ue if).35 E F1(\214le)2.5 E F0 -.15
+(ex)2.5 G(ists and is a symbolic link.).15 E F2<ad6b>108 670.8 Q F1
+(\214le)2.5 E F0 -.35(Tr)144 670.8 S(ue if).35 E F1(\214le)2.5 E F0 -.15
+(ex)2.5 G(ists and its `).15 E(`stick)-.74 E(y')-.15 E 2.5('b)-.74 G
+(it is set.)-2.5 E F2<ad70>108 682.8 Q F1(\214le)2.5 E F0 -.35(Tr)144
+682.8 S(ue if).35 E F1(\214le)2.5 E F0 -.15(ex)2.5 G
+(ists and is a named pipe \(FIFO\).).15 E F2<ad72>108 694.8 Q F1(\214le)
+2.5 E F0 -.35(Tr)144 694.8 S(ue if).35 E F1(\214le)2.5 E F0 -.15(ex)2.5
+G(ists and is readable.).15 E F2<ad73>108 706.8 Q F1(\214le)2.5 E F0
+-.35(Tr)144 706.8 S(ue if).35 E F1(\214le)2.5 E F0 -.15(ex)2.5 G
+(ists and has a size greater than zero.).15 E F2<ad74>108 718.8 Q F1(fd)
+2.5 E F0 -.35(Tr)144 718.8 S(ue if \214le descriptor).35 E F1(fd)4.47 E
+F0(is open and refers to a terminal.)3.27 E(GNU Bash 5.1)72 768 Q
+(2020 October 29)141.235 E(33)190.395 E 0 Cg EP
+%%Page: 34 34
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF<ad75>108 84 Q/F2 10/Times-Italic@0 SF(\214le)2.5 E F0 -.35(Tr)144 84
+S(ue if).35 E F2(\214le)2.5 E F0 -.15(ex)2.5 G(ists and its set-user).15
+E(-id bit is set.)-.2 E F1<ad77>108 96 Q F2(\214le)2.5 E F0 -.35(Tr)144
+96 S(ue if).35 E F2(\214le)2.5 E F0 -.15(ex)2.5 G(ists and is writable.)
+.15 E F1<ad78>108 108 Q F2(\214le)2.5 E F0 -.35(Tr)144 108 S(ue if).35 E
+F2(\214le)2.5 E F0 -.15(ex)2.5 G(ists and is e).15 E -.15(xe)-.15 G
+(cutable.).15 E F1<ad47>108 120 Q F2(\214le)2.5 E F0 -.35(Tr)144 120 S
+(ue if).35 E F2(\214le)2.5 E F0 -.15(ex)2.5 G(ists and is o).15 E
+(wned by the ef)-.25 E(fecti)-.25 E .3 -.15(ve g)-.25 H(roup id.).15 E
+F1<ad4c>108 132 Q F2(\214le)2.5 E F0 -.35(Tr)144 132 S(ue if).35 E F2
+(\214le)2.5 E F0 -.15(ex)2.5 G(ists and is a symbolic link.).15 E F1
+<ad4e>108 144 Q F2(\214le)2.5 E F0 -.35(Tr)144 144 S(ue if).35 E F2
+(\214le)2.5 E F0 -.15(ex)2.5 G(ists and has been modi\214ed since it w)
+.15 E(as last read.)-.1 E F1<ad4f>108 156 Q F2(\214le)2.5 E F0 -.35(Tr)
+144 156 S(ue if).35 E F2(\214le)2.5 E F0 -.15(ex)2.5 G(ists and is o).15
+E(wned by the ef)-.25 E(fecti)-.25 E .3 -.15(ve u)-.25 H(ser id.).15 E
+F1<ad53>108 168 Q F2(\214le)2.5 E F0 -.35(Tr)144 168 S(ue if).35 E F2
+(\214le)2.5 E F0 -.15(ex)2.5 G(ists and is a sock).15 E(et.)-.1 E F2
+(\214le1)108 180 Q F1(\255ef)2.5 E F2(\214le2)2.5 E F0 -.35(Tr)144 192 S
+(ue if).35 E F2(\214le1)2.5 E F0(and)2.5 E F2(\214le2)2.5 E F0
+(refer to the same de)2.5 E(vice and inode numbers.)-.25 E F2(\214le1)
+108 204 Q F0<ad>2.5 E F1(nt)A F2(\214le2)2.5 E F0 -.35(Tr)144 216 S
+(ue if).35 E F2(\214le1)2.5 E F0(is ne)2.5 E
+(wer \(according to modi\214cation date\) than)-.25 E F2(\214le2)2.5 E
+F0 2.5(,o)C 2.5(ri)-2.5 G(f)-2.5 E F2(\214le1)2.5 E F0 -.15(ex)2.5 G
+(ists and).15 E F2(\214le2)2.5 E F0(does not.)2.5 E F2(\214le1)108 228 Q
+F0<ad>2.5 E F1(ot)A F2(\214le2)2.5 E F0 -.35(Tr)144 240 S(ue if).35 E F2
+(\214le1)2.5 E F0(is older than)2.5 E F2(\214le2)2.5 E F0 2.5(,o)C 2.5
+(ri)-2.5 G(f)-2.5 E F2(\214le2)2.5 E F0 -.15(ex)2.5 G(ists and).15 E F2
+(\214le1)2.5 E F0(does not.)2.5 E F1<ad6f>108 252 Q F2(optname)2.5 E F0
+-.35(Tr)144 264 S .262(ue if the shell option).35 F F2(optname)2.992 E
+F0 .262(is enabled.)2.942 F .262
+(See the list of options under the description of the)5.262 F F1<ad6f>
+2.763 E F0(option to the)144 276 Q F1(set)2.5 E F0 -.2(bu)2.5 G
+(iltin belo).2 E -.65(w.)-.25 G F1<ad76>108 288 Q F2(varname)2.5 E F0
+-.35(Tr)144 300 S(ue if the shell v).35 E(ariable)-.25 E F2(varname)2.79
+E F0(is set \(has been assigned a v)2.68 E(alue\).)-.25 E F1<ad52>108
+312 Q F2(varname)2.5 E F0 -.35(Tr)144 324 S(ue if the shell v).35 E
+(ariable)-.25 E F2(varname)2.79 E F0(is set and is a name reference.)
+2.68 E F1<ad7a>108 336 Q F2(string)2.5 E F0 -.35(Tr)144 348 S
+(ue if the length of).35 E F2(string)2.5 E F0(is zero.)2.5 E F2(string)
+108 360 Q F1<ad6e>108 372 Q F2(string)2.5 E F0 -.35(Tr)144 384 S
+(ue if the length of).35 E F2(string)2.84 E F0(is non-zero.)2.72 E F2
+(string1)108 400.8 Q F1(==)2.5 E F2(string2)2.5 E(string1)108 412.8 Q F1
+(=)2.5 E F2(string2)2.5 E F0 -.35(Tr)144 424.8 S .862
+(ue if the strings are equal.).35 F F1(=)5.861 E F0 .861
+(should be used with the)3.361 F F1(test)3.361 E F0 .861
+(command for POSIX conformance.)3.361 F .446(When used with the)144
+436.8 R F1([[)2.946 E F0 .446
+(command, this performs pattern matching as described abo)2.946 F .747
+-.15(ve \()-.15 H F1(Compound).15 E(Commands)144 448.8 Q F0(\).)A F2
+(string1)108 465.6 Q F1(!=)2.5 E F2(string2)2.5 E F0 -.35(Tr)144 477.6 S
+(ue if the strings are not equal.).35 E F2(string1)108 494.4 Q F1(<)2.5
+E F2(string2)2.5 E F0 -.35(Tr)144 506.4 S(ue if).35 E F2(string1)2.5 E
+F0(sorts before)2.5 E F2(string2)2.5 E F0(le)2.5 E(xicographically)-.15
+E(.)-.65 E F2(string1)108 523.2 Q F1(>)2.5 E F2(string2)2.5 E F0 -.35
+(Tr)144 535.2 S(ue if).35 E F2(string1)2.5 E F0(sorts after)2.5 E F2
+(string2)2.5 E F0(le)2.5 E(xicographically)-.15 E(.)-.65 E F2(ar)108.33
+552 Q(g1)-.37 E F1(OP)2.5 E F2(ar)2.5 E(g2)-.37 E/F3 9/Times-Bold@0 SF
+(OP)144 564 Q F0 .385(is one of)2.635 F F1(\255eq)2.885 E F0(,)A F1
+(\255ne)2.885 E F0(,)A F1(\255lt)2.885 E F0(,)A F1(\255le)2.885 E F0(,)A
+F1(\255gt)2.885 E F0 2.885(,o)C(r)-2.885 E F1(\255ge)2.885 E F0 5.385
+(.T)C .385(hese arithmetic binary operators return true if)-5.385 F F2
+(ar)2.884 E(g1)-.37 E F0 .845(is equal to, not equal to, less than, les\
+s than or equal to, greater than, or greater than or equal to)144 576 R
+F2(ar)144 588 Q(g2)-.37 E F0 3.59(,r)C(especti)-3.59 E -.15(ve)-.25 G
+(ly).15 E(.)-.65 E F2(Ar)7.1 E(g1)-.37 E F0(and)3.59 E F2(ar)3.92 E(g2)
+-.37 E F0 1.089(may be positi)3.61 F 1.389 -.15(ve o)-.25 H 3.589(rn).15
+G -2.25 -.15(eg a)-3.589 H(ti).15 E 1.389 -.15(ve i)-.25 H(nte).15 E
+3.589(gers. When)-.15 F 1.089(used with the)3.589 F F1([[)3.589 E F0
+(command,)144 600 Q F2(Ar)4.447 E(g1)-.37 E F0(and)3.437 E F2(Ar)4.447 E
+(g2)-.37 E F0 .937(are e)3.457 F -.25(va)-.25 G .937
+(luated as arithmetic e).25 F .937(xpressions \(see)-.15 F F3 .937
+(ARITHMETIC EV)3.437 F(ALU)-1.215 E(A-)-.54 E(TION)144 612 Q F0(abo)2.25
+E -.15(ve)-.15 G(\).).15 E/F4 10.95/Times-Bold@0 SF(SIMPLE COMMAND EXP)
+72 628.8 Q(ANSION)-.81 E F0 .614(When a simple command is e)108 640.8 R
+-.15(xe)-.15 G .614(cuted, the shell performs the follo).15 F .613
+(wing e)-.25 F .613(xpansions, assignments, and redi-)-.15 F
+(rections, from left to right, in the follo)108 652.8 Q(wing order)-.25
+E(.)-.55 E(1.)108 669.6 Q 1.848(The w)144 669.6 R 1.848
+(ords that the parser has mark)-.1 F 1.848(ed as v)-.1 F 1.849
+(ariable assignments \(those preceding the command)-.25 F
+(name\) and redirections are sa)144 681.6 Q -.15(ve)-.2 G 2.5(df).15 G
+(or later processing.)-2.5 E(2.)108 698.4 Q .18(The w)144 698.4 R .18
+(ords that are not v)-.1 F .179
+(ariable assignments or redirections are e)-.25 F 2.679(xpanded. If)-.15
+F(an)2.679 E 2.679(yw)-.15 G .179(ords remain af-)-2.779 F .346(ter e)
+144 710.4 R .346(xpansion, the \214rst w)-.15 F .346(ord is tak)-.1 F
+.347(en to be the name of the command and the remaining w)-.1 F .347
+(ords are)-.1 F(the ar)144 722.4 Q(guments.)-.18 E(GNU Bash 5.1)72 768 Q
+(2020 October 29)141.235 E(34)190.395 E 0 Cg EP
+%%Page: 35 35
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E(3.)108 84 Q
+(Redirections are performed as described abo)144 84 Q .3 -.15(ve u)-.15
+H(nder).15 E/F1 9/Times-Bold@0 SF(REDIRECTION)2.5 E/F2 9/Times-Roman@0
+SF(.)A F0(4.)108 100.8 Q .717(The te)144 100.8 R .717(xt after the)-.15
+F/F3 10/Times-Bold@0 SF(=)3.217 E F0 .717(in each v)3.217 F .717
+(ariable assignment under)-.25 F .717(goes tilde e)-.18 F .717
+(xpansion, parameter e)-.15 F(xpansion,)-.15 E .339
+(command substitution, arithmetic e)144 112.8 R .339
+(xpansion, and quote remo)-.15 F -.25(va)-.15 G 2.839(lb).25 G .339
+(efore being assigned to the v)-2.839 F(ari-)-.25 E(able.)144 124.8 Q
+.332(If no command name results, the v)108 141.6 R .332
+(ariable assignments af)-.25 F .332(fect the current shell en)-.25 F
+2.832(vironment. Otherwise,)-.4 F(the)2.832 E -.25(va)108 153.6 S .757
+(riables are added to the en).25 F .757(vironment of the e)-.4 F -.15
+(xe)-.15 G .757(cuted command and do not af).15 F .757
+(fect the current shell en)-.25 F(vi-)-.4 E 3.177(ronment. If)108 165.6
+R(an)3.177 E 3.177(yo)-.15 G 3.177(ft)-3.177 G .677
+(he assignments attempts to assign a v)-3.177 F .677
+(alue to a readonly v)-.25 F .676(ariable, an error occurs, and)-.25 F
+(the command e)108 177.6 Q(xits with a non-zero status.)-.15 E .149
+(If no command name results, redirections are performed, b)108 194.4 R
+.149(ut do not af)-.2 F .15(fect the current shell en)-.25 F 2.65
+(vironment. A)-.4 F(redirection error causes the command to e)108 206.4
+Q(xit with a non-zero status.)-.15 E 1.064
+(If there is a command name left after e)108 223.2 R 1.064(xpansion, e)
+-.15 F -.15(xe)-.15 G 1.064(cution proceeds as described belo).15 F
+4.864 -.65(w. O)-.25 H 1.064(therwise, the).65 F .068(command e)108
+235.2 R 2.568(xits. If)-.15 F .069(one of the e)2.568 F .069
+(xpansions contained a command substitution, the e)-.15 F .069
+(xit status of the command)-.15 F .467(is the e)108 247.2 R .466
+(xit status of the last command substitution performed.)-.15 F .466
+(If there were no command substitutions, the)5.466 F(command e)108 259.2
+Q(xits with a status of zero.)-.15 E/F4 10.95/Times-Bold@0 SF
+(COMMAND EXECUTION)72 276 Q F0 .546
+(After a command has been split into w)108 288 R .547
+(ords, if it results in a simple command and an optional list of ar)-.1
+F(gu-)-.18 E(ments, the follo)108 300 Q(wing actions are tak)-.25 E(en.)
+-.1 E .379(If the command name contains no slashes, the shell attempts \
+to locate it.)108 316.8 R .379(If there e)5.379 F .379
+(xists a shell function by)-.15 F .246(that name, that function is in)
+108 328.8 R -.2(vo)-.4 G -.1(ke).2 G 2.746(da).1 G 2.746(sd)-2.746 G
+.246(escribed abo)-2.746 F .546 -.15(ve i)-.15 H(n).15 E F1(FUNCTIONS)
+2.746 E F2(.)A F0 .246(If the name does not match a func-)4.746 F
+(tion, the shell searches for it in the list of shell b)108 340.8 Q 2.5
+(uiltins. If)-.2 F 2.5(am)2.5 G(atch is found, that b)-2.5 E
+(uiltin is in)-.2 E -.2(vo)-.4 G -.1(ke).2 G(d.).1 E .31
+(If the name is neither a shell function nor a b)108 357.6 R .309
+(uiltin, and contains no slashes,)-.2 F F3(bash)2.809 E F0 .309
+(searches each element of)2.809 F(the)108 369.6 Q F1 -.666(PA)3.162 G
+(TH)-.189 E F0 .662(for a directory containing an e)2.912 F -.15(xe)-.15
+G .662(cutable \214le by that name.).15 F F3(Bash)5.662 E F0 .663
+(uses a hash table to remember)3.162 F 1.915(the full pathnames of e)108
+381.6 R -.15(xe)-.15 G 1.915(cutable \214les \(see).15 F F3(hash)4.415 E
+F0(under)4.415 E F1 1.915(SHELL B)4.415 F(UIL)-.09 E 1.914(TIN COMMANDS)
+-.828 F F0(belo)4.164 E 4.414(w\). A)-.25 F(full)4.414 E .719
+(search of the directories in)108 393.6 R F1 -.666(PA)3.219 G(TH)-.189 E
+F0 .72(is performed only if the command is not found in the hash table.)
+2.969 F .72(If the)5.72 F .956(search is unsuccessful, the shell search\
+es for a de\214ned shell function named)108 405.6 R F3(command_not_f)
+3.455 E(ound_han-)-.25 E(dle)108 417.6 Q F0 6.005(.I)C 3.505(ft)-6.005 G
+1.005(hat function e)-3.505 F 1.005(xists, it is in)-.15 F -.2(vo)-.4 G
+-.1(ke).2 G 3.506(di).1 G 3.506(nas)-3.506 G 1.006(eparate e)-3.506 F
+-.15(xe)-.15 G 1.006(cution en).15 F 1.006
+(vironment with the original command)-.4 F .256
+(and the original command')108 429.6 R 2.756(sa)-.55 G -.18(rg)-2.756 G
+.256(uments as its ar).18 F .256(guments, and the function')-.18 F 2.755
+(se)-.55 G .255(xit status becomes the e)-2.905 F .255(xit sta-)-.15 F
+.263(tus of that subshell.)108 441.6 R .263(If that function is not de\
+\214ned, the shell prints an error message and returns an e)5.263 F .263
+(xit sta-)-.15 F(tus of 127.)108 453.6 Q 1.089(If the search is success\
+ful, or if the command name contains one or more slashes, the shell e)
+108 470.4 R -.15(xe)-.15 G 1.089(cutes the).15 F .197
+(named program in a separate e)108 482.4 R -.15(xe)-.15 G .197
+(cution en).15 F 2.698(vironment. Ar)-.4 F .198
+(gument 0 is set to the name gi)-.18 F -.15(ve)-.25 G .198
+(n, and the remain-).15 F(ing ar)108 494.4 Q
+(guments to the command are set to the ar)-.18 E(guments gi)-.18 E -.15
+(ve)-.25 G(n, if an).15 E -.65(y.)-.15 G 1.049(If this e)108 511.2 R
+-.15(xe)-.15 G 1.049(cution f).15 F 1.049
+(ails because the \214le is not in e)-.1 F -.15(xe)-.15 G 1.048
+(cutable format, and the \214le is not a directory).15 F 3.548(,i)-.65 G
+3.548(ti)-3.548 G 3.548(sa)-3.548 G(s-)-3.548 E .042(sumed to be a)108
+523.2 R/F5 10/Times-Italic@0 SF .042(shell script)2.542 F F0 2.542
+(,a\214)C .043(le containing shell commands.)-2.542 F 2.543(As)5.043 G
+.043(ubshell is spa)-2.543 F .043(wned to e)-.15 F -.15(xe)-.15 G .043
+(cute it.).15 F .043(This sub-)5.043 F .275
+(shell reinitializes itself, so that the ef)108 535.2 R .274
+(fect is as if a ne)-.25 F 2.774(ws)-.25 G .274(hell had been in)-2.774
+F -.2(vo)-.4 G -.1(ke).2 G 2.774(dt).1 G 2.774(oh)-2.774 G .274
+(andle the script, with the)-2.774 F -.15(ex)108 547.2 S 2.357
+(ception that the locations of commands remembered by the parent \(see)
+.15 F F3(hash)4.858 E F0(belo)4.858 E 4.858(wu)-.25 G(nder)-4.858 E F1
+(SHELL)4.858 E -.09(BU)108 559.2 S(IL).09 E(TIN COMMANDS)-.828 E F2(\))A
+F0(are retained by the child.)2.25 E .348(If the program is a \214le be)
+108 576 R .348(ginning with)-.15 F F3(#!)2.848 E F0 2.848(,t)C .347(he \
+remainder of the \214rst line speci\214es an interpreter for the pro-)
+-2.848 F 3.178(gram. The)108 588 R .678(shell e)3.178 F -.15(xe)-.15 G
+.678(cutes the speci\214ed interpreter on operating systems that do not\
+ handle this e).15 F -.15(xe)-.15 G(cutable).15 E .206(format themselv)
+108 600 R 2.706(es. The)-.15 F(ar)2.706 E .206
+(guments to the interpreter consist of a single optional ar)-.18 F .206
+(gument follo)-.18 F .206(wing the in-)-.25 F .267
+(terpreter name on the \214rst line of the program, follo)108 612 R .268
+(wed by the name of the program, follo)-.25 F .268(wed by the com-)-.25
+F(mand ar)108 624 Q(guments, if an)-.18 E -.65(y.)-.15 G F4
+(COMMAND EXECUTION ENVIR)72 640.8 Q(ONMENT)-.329 E F0(The shell has an)
+108 652.8 Q F5 -.2(ex)2.5 G(ecution en).2 E(vir)-.4 E(onment)-.45 E F0
+2.5(,w)C(hich consists of the follo)-2.5 E(wing:)-.25 E<83>108 669.6 Q
+1.406(open \214les inherited by the shell at in)144 669.6 R -.2(vo)-.4 G
+1.405(cation, as modi\214ed by redirections supplied to the).2 F F3
+(exec)3.905 E F0 -.2(bu)144 681.6 S(iltin).2 E<83>108 698.4 Q
+(the current w)144 698.4 Q(orking directory as set by)-.1 E F3(cd)2.5 E
+F0(,)A F3(pushd)2.5 E F0 2.5(,o)C(r)-2.5 E F3(popd)2.5 E F0 2.5(,o)C 2.5
+(ri)-2.5 G(nherited by the shell at in)-2.5 E -.2(vo)-.4 G(cation).2 E
+<83>108 715.2 Q(the \214le creation mode mask as set by)144 715.2 Q F3
+(umask)2.5 E F0(or inherited from the shell')2.5 E 2.5(sp)-.55 G(arent)
+-2.5 E(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(35)190.395 E 0 Cg
+EP
+%%Page: 36 36
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E<83>108 84 Q
+(current traps set by)144 84 Q/F1 10/Times-Bold@0 SF(trap)2.5 E F0<83>
+108 100.8 Q .256(shell parameters that are set by v)144 100.8 R .256
+(ariable assignment or with)-.25 F F1(set)2.756 E F0 .257
+(or inherited from the shell')2.756 F 2.757(sp)-.55 G(arent)-2.757 E
+(in the en)144 112.8 Q(vironment)-.4 E<83>108 129.6 Q
+(shell functions de\214ned during e)144 129.6 Q -.15(xe)-.15 G
+(cution or inherited from the shell').15 E 2.5(sp)-.55 G
+(arent in the en)-2.5 E(vironment)-.4 E<83>108 146.4 Q
+(options enabled at in)144 146.4 Q -.2(vo)-.4 G(cation \(either by def)
+.2 E(ault or with command-line ar)-.1 E(guments\) or by)-.18 E F1(set)
+2.5 E F0<83>108 163.2 Q(options enabled by)144 163.2 Q F1(shopt)2.5 E F0
+<83>108 180 Q(shell aliases de\214ned with)144 180 Q F1(alias)2.5 E F0
+<83>108 196.8 Q -.25(va)144 196.8 S
+(rious process IDs, including those of background jobs, the v).25 E
+(alue of)-.25 E F1($$)2.5 E F0 2.5(,a)C(nd the v)-2.5 E(alue of)-.25 E
+/F2 9/Times-Bold@0 SF(PPID)2.5 E F0 .427
+(When a simple command other than a b)108 213.6 R .426
+(uiltin or shell function is to be e)-.2 F -.15(xe)-.15 G .426
+(cuted, it is in).15 F -.2(vo)-.4 G -.1(ke).2 G 2.926(di).1 G 2.926(nas)
+-2.926 G(eparate)-2.926 E -.15(exe)108 225.6 S .133(cution en).15 F .133
+(vironment that consists of the follo)-.4 F 2.634(wing. Unless)-.25 F
+.134(otherwise noted, the v)2.634 F .134(alues are inherited from)-.25 F
+(the shell.)108 237.6 Q<83>108 254.4 Q 1.056(the shell')144 254.4 R
+3.556(so)-.55 G 1.056(pen \214les, plus an)-3.556 F 3.556(ym)-.15 G
+1.056
+(odi\214cations and additions speci\214ed by redirections to the com-)
+-3.556 F(mand)144 266.4 Q<83>108 283.2 Q(the current w)144 283.2 Q
+(orking directory)-.1 E<83>108 300 Q(the \214le creation mode mask)144
+300 Q<83>108 316.8 Q .856(shell v)144 316.8 R .857
+(ariables and functions mark)-.25 F .857(ed for e)-.1 F .857
+(xport, along with v)-.15 F .857(ariables e)-.25 F .857
+(xported for the command,)-.15 F(passed in the en)144 328.8 Q(vironment)
+-.4 E<83>108 345.6 Q .307(traps caught by the shell are reset to the v)
+144 345.6 R .306(alues inherited from the shell')-.25 F 2.806(sp)-.55 G
+.306(arent, and traps ignored)-2.806 F(by the shell are ignored)144
+357.6 Q 2.5(Ac)108 374.4 S(ommand in)-2.5 E -.2(vo)-.4 G -.1(ke).2 G 2.5
+(di).1 G 2.5(nt)-2.5 G(his separate en)-2.5 E(vironment cannot af)-.4 E
+(fect the shell')-.25 E 2.5(se)-.55 G -.15(xe)-2.65 G(cution en).15 E
+(vironment.)-.4 E .577(Command substitution, commands grouped with pare\
+ntheses, and asynchronous commands are in)108 391.2 R -.2(vo)-.4 G -.1
+(ke).2 G 3.078(di).1 G(n)-3.078 E 2.745(as)108 403.2 S .245(ubshell en)
+-2.745 F .245(vironment that is a duplicate of the shell en)-.4 F .244
+(vironment, e)-.4 F .244(xcept that traps caught by the shell are)-.15 F
+.358(reset to the v)108 415.2 R .358
+(alues that the shell inherited from its parent at in)-.25 F -.2(vo)-.4
+G 2.858(cation. Builtin).2 F .359(commands that are in)2.859 F -.2(vo)
+-.4 G -.1(ke).2 G(d).1 E .857(as part of a pipeline are also e)108 427.2
+R -.15(xe)-.15 G .856(cuted in a subshell en).15 F 3.356
+(vironment. Changes)-.4 F .856(made to the subshell en)3.356 F(viron-)
+-.4 E(ment cannot af)108 439.2 Q(fect the shell')-.25 E 2.5(se)-.55 G
+-.15(xe)-2.65 G(cution en).15 E(vironment.)-.4 E 1.376(Subshells spa)108
+456 R 1.376(wned to e)-.15 F -.15(xe)-.15 G 1.377
+(cute command substitutions inherit the v).15 F 1.377(alue of the)-.25 F
+F1<ad65>3.877 E F0 1.377(option from the parent)3.877 F 2.5(shell. When)
+108 468 R(not in)2.5 E/F3 10/Times-Italic@0 SF(posix mode)2.5 E F0(,)A
+F1(bash)2.5 E F0(clears the)2.5 E F1<ad65>2.5 E F0
+(option in such subshells.)2.5 E .405(If a command is follo)108 484.8 R
+.405(wed by a)-.25 F F1(&)2.905 E F0 .404(and job control is not acti)
+2.905 F -.15(ve)-.25 G 2.904(,t).15 G .404(he def)-2.904 F .404
+(ault standard input for the command)-.1 F .197(is the empty \214le)108
+496.8 R F3(/de)2.697 E(v/null)-.15 E F0 5.197(.O)C .197
+(therwise, the in)-5.197 F -.2(vo)-.4 G -.1(ke).2 G 2.697(dc).1 G .198
+(ommand inherits the \214le descriptors of the calling shell)-2.697 F
+(as modi\214ed by redirections.)108 508.8 Q/F4 10.95/Times-Bold@0 SF
+(ENVIR)72 525.6 Q(ONMENT)-.329 E F0 2.344(When a program is in)108 537.6
+R -.2(vo)-.4 G -.1(ke).2 G 4.843(di).1 G 4.843(ti)-4.843 G 4.843(sg)
+-4.843 G -2.15 -.25(iv e)-4.843 H 4.843(na).25 G 4.843(na)-4.843 G 2.343
+(rray of strings called the)-4.843 F F3(en)5.033 E(vir)-.4 E(onment)-.45
+E F0 7.343(.T).68 G 2.343(his is a list of)-7.343 F F3(name)108 549.6 Q
+F0<ad>A F3(value)A F0(pairs, of the form)2.5 E F3(name)2.86 E F0(=)A F3
+(value)A F0(.).18 E .438(The shell pro)108 566.4 R .438(vides se)-.15 F
+-.15(ve)-.25 G .438(ral w).15 F .438(ays to manipulate the en)-.1 F
+2.938(vironment. On)-.4 F(in)2.938 E -.2(vo)-.4 G .438
+(cation, the shell scans its o).2 F .439(wn en-)-.25 F .709(vironment a\
+nd creates a parameter for each name found, automatically marking it fo\
+r)108 578.4 R F3 -.2(ex)3.208 G(port).2 E F0 .708(to child pro-)3.888 F
+2.703(cesses. Ex)108 590.4 R .203(ecuted commands inherit the en)-.15 F
+2.703(vironment. The)-.4 F F1(export)2.703 E F0(and)2.703 E F1(declar)
+2.703 E 2.703<65ad>-.18 G(x)-2.703 E F0 .203(commands allo)2.703 F 2.704
+(wp)-.25 G(aram-)-2.704 E .332
+(eters and functions to be added to and deleted from the en)108 602.4 R
+2.832(vironment. If)-.4 F .332(the v)2.832 F .332
+(alue of a parameter in the en-)-.25 F .131
+(vironment is modi\214ed, the ne)108 614.4 R 2.631(wv)-.25 G .131
+(alue becomes part of the en)-2.881 F .132
+(vironment, replacing the old.)-.4 F .132(The en)5.132 F(vironment)-.4 E
+.321(inherited by an)108 626.4 R 2.821(ye)-.15 G -.15(xe)-2.971 G .321
+(cuted command consists of the shell').15 F 2.821(si)-.55 G .321
+(nitial en)-2.821 F .32(vironment, whose v)-.4 F .32(alues may be modi-)
+-.25 F .533(\214ed in the shell, less an)108 638.4 R 3.033(yp)-.15 G
+.534(airs remo)-3.033 F -.15(ve)-.15 G 3.034(db).15 G 3.034(yt)-3.034 G
+(he)-3.034 E F1(unset)3.034 E F0 .534(command, plus an)3.034 F 3.034(ya)
+-.15 G .534(dditions via the)-3.034 F F1(export)3.034 E F0(and)3.034 E
+F1(de-)3.034 E(clar)108 650.4 Q 2.5<65ad>-.18 G(x)-2.5 E F0(commands.)
+2.5 E .563(The en)108 667.2 R .563(vironment for an)-.4 F(y)-.15 E F3
+.563(simple command)3.403 F F0 .562
+(or function may be augmented temporarily by pre\214xing it with)3.833 F
+.202(parameter assignments, as described abo)108 679.2 R .502 -.15(ve i)
+-.15 H(n).15 E F2 -.666(PA)2.702 G(RAMETERS).666 E/F5 9/Times-Roman@0 SF
+(.)A F0 .202(These assignment statements af)4.702 F .203(fect only the)
+-.25 F(en)108 691.2 Q(vironment seen by that command.)-.4 E .81(If the)
+108 708 R F1<ad6b>3.31 E F0 .81(option is set \(see the)3.31 F F1(set)
+3.31 E F0 -.2(bu)3.31 G .81(iltin command belo).2 F .81(w\), then)-.25 F
+F3(all)3.64 E F0 .81(parameter assignments are placed in)3.82 F(the en)
+108 720 Q
+(vironment for a command, not just those that precede the command name.)
+-.4 E(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(36)190.395 E 0 Cg
+EP
+%%Page: 37 37
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E(When)108 84 Q/F1
+10/Times-Bold@0 SF(bash)3.585 E F0(in)3.585 E -.2(vo)-.4 G -.1(ke).2 G
+3.585(sa).1 G 3.585(ne)-3.585 G 1.085(xternal command, the v)-3.735 F
+(ariable)-.25 E F1(_)3.585 E F0 1.086
+(is set to the full \214lename of the command and)3.586 F
+(passed to that command in its en)108 96 Q(vironment.)-.4 E/F2 10.95
+/Times-Bold@0 SF(EXIT ST)72 112.8 Q -1.04(AT)-.986 G(US)1.04 E F0 .151
+(The e)108 124.8 R .151(xit status of an e)-.15 F -.15(xe)-.15 G .151
+(cuted command is the v).15 F .15(alue returned by the)-.25 F/F3 10
+/Times-Italic@0 SF(waitpid)2.65 E F0 .15(system call or equi)2.65 F -.25
+(va)-.25 G .15(lent func-).25 F 2.847(tion. Exit)108 136.8 R .347
+(statuses f)2.847 F .347(all between 0 and 255, though, as e)-.1 F .347
+(xplained belo)-.15 F 1.647 -.65(w, t)-.25 H .347(he shell may use v).65
+F .348(alues abo)-.25 F .648 -.15(ve 1)-.15 H(25).15 E(specially)108
+148.8 Q 5.507(.E)-.65 G .507(xit statuses from shell b)-5.507 F .507
+(uiltins and compound commands are also limited to this range.)-.2 F
+(Under)5.506 E(certain circumstances, the shell will use special v)108
+160.8 Q(alues to indicate speci\214c f)-.25 E(ailure modes.)-.1 E -.15
+(Fo)108 177.6 S 3.372(rt).15 G .872(he shell')-3.372 F 3.372(sp)-.55 G
+.873(urposes, a command which e)-3.372 F .873(xits with a zero e)-.15 F
+.873(xit status has succeeded.)-.15 F .873(An e)5.873 F .873
+(xit status of)-.15 F .049(zero indicates success.)108 189.6 R 2.549(An)
+5.049 G .049(on-zero e)-2.549 F .049(xit status indicates f)-.15 F 2.549
+(ailure. When)-.1 F 2.549(ac)2.549 G .048(ommand terminates on a f)
+-2.549 F .048(atal sig-)-.1 F(nal)108 201.6 Q F3(N)2.5 E F0(,)A F1(bash)
+2.5 E F0(uses the v)2.5 E(alue of 128+)-.25 E F3(N)A F0(as the e)2.5 E
+(xit status.)-.15 E .404
+(If a command is not found, the child process created to e)108 218.4 R
+-.15(xe)-.15 G .404(cute it returns a status of 127.).15 F .405
+(If a command is)5.405 F(found b)108 230.4 Q(ut is not e)-.2 E -.15(xe)
+-.15 G(cutable, the return status is 126.).15 E(If a command f)108 247.2
+Q(ails because of an error during e)-.1 E
+(xpansion or redirection, the e)-.15 E(xit status is greater than zero.)
+-.15 E .081(Shell b)108 264 R .081
+(uiltin commands return a status of 0 \()-.2 F F3(true)A F0 2.581(\)i)C
+2.581(fs)-2.581 G .08(uccessful, and non-zero \()-2.581 F F3(false)A F0
+2.58(\)i)C 2.58(fa)-2.58 G 2.58(ne)-2.58 G .08(rror occurs while)-2.58 F
+(the)108 276 Q 2.967(ye)-.15 G -.15(xe)-3.117 G 2.967(cute. All).15 F
+-.2(bu)2.967 G .467(iltins return an e).2 F .468
+(xit status of 2 to indicate incorrect usage, generally in)-.15 F -.25
+(va)-.4 G .468(lid options or).25 F(missing ar)108 288 Q(guments.)-.18 E
+F1(Bash)108 304.8 Q F0 .202(itself returns the e)2.702 F .202
+(xit status of the last command e)-.15 F -.15(xe)-.15 G .201
+(cuted, unless a syntax error occurs, in which case).15 F(it e)108 316.8
+Q(xits with a non-zero v)-.15 E 2.5(alue. See)-.25 F(also the)2.5 E F1
+(exit)2.5 E F0 -.2(bu)2.5 G(iltin command belo).2 E -.65(w.)-.25 G F2
+(SIGN)72 333.6 Q(ALS)-.219 E F0(When)108 345.6 Q F1(bash)2.502 E F0 .002
+(is interacti)2.502 F -.15(ve)-.25 G 2.502(,i).15 G 2.502(nt)-2.502 G
+.002(he absence of an)-2.502 F 2.502(yt)-.15 G .002(raps, it ignores)
+-2.502 F/F4 9/Times-Bold@0 SF(SIGTERM)2.502 E F0 .002(\(so that)2.252 F
+F1 .002(kill 0)2.502 F F0 .002(does not kill an in-)2.502 F(teracti)108
+357.6 Q 1.216 -.15(ve s)-.25 H .916(hell\), and).15 F F4(SIGINT)3.416 E
+F0 .915(is caught and handled \(so that the)3.166 F F1(wait)3.415 E F0
+-.2(bu)3.415 G .915(iltin is interruptible\).).2 F .915(In all cases,)
+5.915 F F1(bash)108 369.6 Q F0(ignores)2.5 E F4(SIGQ)2.5 E(UIT)-.09 E/F5
+9/Times-Roman@0 SF(.)A F0(If job control is in ef)4.5 E(fect,)-.25 E F1
+(bash)2.5 E F0(ignores)2.5 E F4(SIGTTIN)2.5 E F5(,)A F4(SIGTT)2.25 E(OU)
+-.162 E F5(,)A F0(and)2.25 E F4(SIGTSTP)2.5 E F5(.)A F0(Non-b)108 386.4
+Q 1.064(uiltin commands run by)-.2 F F1(bash)3.564 E F0(ha)3.564 E 1.365
+-.15(ve s)-.2 H 1.065(ignal handlers set to the v).15 F 1.065
+(alues inherited by the shell from its)-.25 F 3.248(parent. When)108
+398.4 R .748(job control is not in ef)3.248 F .747
+(fect, asynchronous commands ignore)-.25 F F4(SIGINT)3.247 E F0(and)
+2.997 E F4(SIGQ)3.247 E(UIT)-.09 E F0 .747(in addi-)2.997 F .652
+(tion to these inherited handlers.)108 410.4 R .653
+(Commands run as a result of command substitution ignore the k)5.652 F
+-.15(ey)-.1 G(board-).15 E(generated job control signals)108 422.4 Q F4
+(SIGTTIN)2.5 E F5(,)A F4(SIGTT)2.25 E(OU)-.162 E F5(,)A F0(and)2.25 E F4
+(SIGTSTP)2.5 E F5(.)A F0 2.046(The shell e)108 439.2 R 2.046
+(xits by def)-.15 F 2.045(ault upon receipt of a)-.1 F F4(SIGHUP)4.545 E
+F5(.)A F0 2.045(Before e)6.545 F 2.045(xiting, an interacti)-.15 F 2.345
+-.15(ve s)-.25 H 2.045(hell resends the).15 F F4(SIGHUP)108 451.2 Q F0
+1.004(to all jobs, running or stopped.)3.254 F 1.004
+(Stopped jobs are sent)6.004 F F4(SIGCONT)3.505 E F0 1.005
+(to ensure that the)3.255 F 3.505(yr)-.15 G(ecei)-3.505 E 1.305 -.15
+(ve t)-.25 H(he).15 E F4(SIGHUP)108 463.2 Q F5(.)A F0 2.53 -.8(To p)5.43
+H(re).8 E -.15(ve)-.25 G .93(nt the shell from sending the signal to a \
+particular job, it should be remo).15 F -.15(ve)-.15 G 3.429(df).15 G
+.929(rom the)-3.429 F 1.356(jobs table with the)108 475.2 R F1(diso)
+3.856 E(wn)-.1 E F0 -.2(bu)3.856 G 1.356(iltin \(see).2 F F4 1.356
+(SHELL B)3.856 F(UIL)-.09 E 1.356(TIN COMMANDS)-.828 F F0(belo)3.607 E
+1.357(w\) or mark)-.25 F 1.357(ed to not recei)-.1 F -.15(ve)-.25 G F4
+(SIGHUP)108 487.2 Q F0(using)2.25 E F1(diso)2.5 E(wn \255h)-.1 E F0(.)A
+.166(If the)108 504 R F1(huponexit)2.666 E F0 .166
+(shell option has been set with)2.666 F F1(shopt)2.666 E F0(,)A F1(bash)
+2.666 E F0 .166(sends a)2.666 F F4(SIGHUP)2.666 E F0 .166
+(to all jobs when an interacti)2.416 F -.15(ve)-.25 G(login shell e)108
+516 Q(xits.)-.15 E(If)108 532.8 Q F1(bash)3.046 E F0 .546(is w)3.046 F
+.546(aiting for a command to complete and recei)-.1 F -.15(ve)-.25 G
+3.046(sas).15 G .546(ignal for which a trap has been set, the trap)
+-3.046 F .663(will not be e)108 544.8 R -.15(xe)-.15 G .663
+(cuted until the command completes.).15 F(When)5.663 E F1(bash)3.163 E
+F0 .662(is w)3.163 F .662(aiting for an asynchronous command)-.1 F .326
+(via the)108 556.8 R F1(wait)2.826 E F0 -.2(bu)2.826 G .327(iltin, the \
+reception of a signal for which a trap has been set will cause the).2 F
+F1(wait)2.827 E F0 -.2(bu)2.827 G .327(iltin to re-).2 F
+(turn immediately with an e)108 568.8 Q
+(xit status greater than 128, immediately after which the trap is e)-.15
+E -.15(xe)-.15 G(cuted.).15 E F2(JOB CONTR)72 585.6 Q(OL)-.329 E F3 -.25
+(Jo)108 597.6 S 3.369(bc).25 G(ontr)-3.369 E(ol)-.45 E F0 .868
+(refers to the ability to selecti)3.879 F -.15(ve)-.25 G .868
+(ly stop \().15 F F3(suspend)A F0 3.368(\)t)C .868(he e)-3.368 F -.15
+(xe)-.15 G .868(cution of processes and continue \().15 F F3 -.37(re)C
+(-).37 E(sume)108 609.6 Q F0 2.664(\)t)C .164(heir e)-2.664 F -.15(xe)
+-.15 G .164(cution at a later point.).15 F 2.665(Au)5.165 G .165
+(ser typically emplo)-2.665 F .165(ys this f)-.1 F .165
+(acility via an interacti)-.1 F .465 -.15(ve i)-.25 H(nterf).15 E .165
+(ace sup-)-.1 F(plied jointly by the operating system k)108 621.6 Q
+(ernel')-.1 E 2.5(st)-.55 G(erminal dri)-2.5 E -.15(ve)-.25 G 2.5(ra).15
+G(nd)-2.5 E F1(bash)2.5 E F0(.)A .785(The shell associates a)108 638.4 R
+F3(job)5.025 E F0 .785(with each pipeline.)3.515 F .784(It k)5.785 F
+.784(eeps a table of currently e)-.1 F -.15(xe)-.15 G .784
+(cuting jobs, which may be).15 F .324(listed with the)108 650.4 R F1
+(jobs)2.824 E F0 2.824(command. When)2.824 F F1(bash)2.825 E F0 .325
+(starts a job asynchronously \(in the)2.825 F F3(bac)3.095 E(kgr)-.2 E
+(ound)-.45 E F0 .325(\), it prints a line).77 F(that looks lik)108 662.4
+Q(e:)-.1 E([1] 25647)144 679.2 Q .241(indicating that this job is job n\
+umber 1 and that the process ID of the last process in the pipeline ass\
+ociated)108 696 R .732(with this job is 25647.)108 708 R .733
+(All of the processes in a single pipeline are members of the same job)
+5.732 F(.)-.4 E F1(Bash)5.733 E F0(uses)3.233 E(the)108 720 Q F3(job)
+4.24 E F0(abstraction as the basis for job control.)2.73 E(GNU Bash 5.1)
+72 768 Q(2020 October 29)141.235 E(37)190.395 E 0 Cg EP
+%%Page: 38 38
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E 1.982 -.8(To f)108
+84 T .382(acilitate the implementation of the user interf).7 F .382
+(ace to job control, the operating system maintains the no-)-.1 F 1.537
+(tion of a)108 96 R/F1 10/Times-Italic@0 SF(curr)4.037 E 1.537
+(ent terminal pr)-.37 F 1.537(ocess gr)-.45 F 1.537(oup ID)-.45 F F0
+6.537(.M)C 1.538(embers of this process group \(processes whose process)
+-6.537 F .023
+(group ID is equal to the current terminal process group ID\) recei)108
+108 R .323 -.15(ve k)-.25 H -.15(ey).05 G .023
+(board-generated signals such as).15 F/F2 9/Times-Bold@0 SF(SIG-)2.522 E
+(INT)108 120 Q/F3 9/Times-Roman@0 SF(.)A F0 1.215
+(These processes are said to be in the)5.715 F F1(for)5.685 E -.4(eg)
+-.37 G -.45(ro).4 G(und).45 E F0(.).77 E F1(Bac)6.795 E(kgr)-.2 E(ound)
+-.45 E F0 1.216(processes are those whose process)4.485 F .146
+(group ID dif)108 132 R .146(fers from the terminal')-.25 F .146
+(s; such processes are immune to k)-.55 F -.15(ey)-.1 G .145
+(board-generated signals.).15 F .145(Only fore-)5.145 F .16
+(ground processes are allo)108 144 R .16(wed to read from or)-.25 F 2.66
+(,i)-.4 G 2.66(ft)-2.66 G .16(he user so speci\214es with)-2.66 F/F4 10
+/Courier@0 SF .16(stty tostop)2.66 F F0 2.66(,w)C .16(rite to the ter)
+-2.66 F(-)-.2 E 3.052(minal. Background)108 156 R .551
+(processes which attempt to read from \(write to when)3.052 F F4 .551
+(stty tostop)3.051 F F0 .551(is in ef)3.051 F .551(fect\) the)-.25 F
+.717(terminal are sent a)108 168 R F2 .717(SIGTTIN \(SIGTT)3.217 F(OU\))
+-.162 E F0 .718(signal by the k)2.967 F(ernel')-.1 E 3.218(st)-.55 G
+.718(erminal dri)-3.218 F -.15(ve)-.25 G 1.518 -.4(r, w).15 H .718
+(hich, unless caught, sus-).4 F(pends the process.)108 180 Q 1.088
+(If the operating system on which)108 196.8 R/F5 10/Times-Bold@0 SF
+(bash)3.588 E F0 1.088(is running supports job control,)3.588 F F5(bash)
+3.587 E F0 1.087(contains f)3.587 F 1.087(acilities to use it.)-.1 F -.8
+(Ty)108 208.8 S .301(ping the).8 F F1(suspend)3.141 E F0 .301
+(character \(typically)3.571 F F5(^Z)2.801 E F0 2.801(,C)C .301
+(ontrol-Z\) while a process is running causes that process to be)-2.801
+F 2.143(stopped and returns control to)108 220.8 R F5(bash)4.642 E F0
+7.142(.T)C 2.142(yping the)-7.942 F F1 2.142(delayed suspend)4.992 F F0
+2.142(character \(typically)5.412 F F5(^Y)4.642 E F0 4.642(,C)C
+(ontrol-Y\))-4.642 E .021(causes the process to be stopped when it atte\
+mpts to read input from the terminal, and control to be returned)108
+232.8 R(to)108 244.8 Q F5(bash)3.392 E F0 5.892(.T)C .892
+(he user may then manipulate the state of this job, using the)-5.892 F
+F5(bg)3.392 E F0 .892(command to continue it in the)3.392 F .17
+(background, the)108 256.8 R F5(fg)2.67 E F0 .17
+(command to continue it in the fore)2.67 F .17(ground, or the)-.15 F F5
+(kill)2.67 E F0 .17(command to kill it.)2.67 F(A)5.17 E F5(^Z)2.67 E F0
+(tak)2.67 E .17(es ef-)-.1 F 1.419(fect immediately)108 268.8 R 3.919
+(,a)-.65 G 1.418(nd has the additional side ef)-3.919 F 1.418
+(fect of causing pending output and typeahead to be dis-)-.25 F(carded.)
+108 280.8 Q .777(There are a number of w)108 297.6 R .777
+(ays to refer to a job in the shell.)-.1 F .777(The character)5.777 F F5
+(%)3.277 E F0 .777(introduces a job speci\214cation)3.277 F(\()108 309.6
+Q F1(jobspec)A F0 3.458(\). Job)B(number)3.458 E F1(n)3.818 E F0 .957
+(may be referred to as)3.697 F F5(%n)3.457 E F0 5.957(.A)C .957
+(job may also be referred to using a pre\214x of the)-2.5 F .59(name us\
+ed to start it, or using a substring that appears in its command line.)
+108 321.6 R -.15(Fo)5.59 G 3.09(re).15 G(xample,)-3.24 E F5(%ce)3.09 E
+F0 .59(refers to a)3.09 F .385(stopped job whose command name be)108
+333.6 R .385(gins with)-.15 F F5(ce)2.885 E F0 5.385(.I)C 2.885(fap)
+-5.385 G .385(re\214x matches more than one job,)-2.885 F F5(bash)2.885
+E F0 .385(reports an)2.885 F(error)108 345.6 Q 5.194(.U)-.55 G(sing)
+-5.194 E F5(%?ce)2.694 E F0 2.694(,o)C 2.694(nt)-2.694 G .194
+(he other hand, refers to an)-2.694 F 2.694(yj)-.15 G .194
+(ob containing the string)-2.694 F F5(ce)2.694 E F0 .194
+(in its command line.)2.694 F .194(If the)5.194 F .306
+(substring matches more than one job,)108 357.6 R F5(bash)2.806 E F0
+.306(reports an error)2.806 F 5.306(.T)-.55 G .306(he symbols)-5.306 F
+F5(%%)2.806 E F0(and)2.806 E F5(%+)2.806 E F0 .306(refer to the shell')
+2.806 F(s)-.55 E .132(notion of the)108 369.6 R F1(curr)2.832 E .133
+(ent job)-.37 F F0 2.633(,w).23 G .133
+(hich is the last job stopped while it w)-2.633 F .133(as in the fore)
+-.1 F .133(ground or started in the back-)-.15 F 2.576(ground. The)108
+381.6 R F1(pr)3.826 E -.15(ev)-.37 G .076(ious job).15 F F0 .076
+(may be referenced using)2.806 F F5<25ad>2.576 E F0 5.076(.I)C 2.576(ft)
+-5.076 G .075(here is only a single job,)-2.576 F F5(%+)2.575 E F0(and)
+2.575 E F5<25ad>2.575 E F0 .075(can both)2.575 F .317
+(be used to refer to that job)108 393.6 R 5.317(.I)-.4 G 2.817(no)-5.317
+G .317(utput pertaining to jobs \(e.g., the output of the)-2.817 F F5
+(jobs)2.817 E F0 .317(command\), the current)2.817 F .033(job is al)108
+405.6 R -.1(wa)-.1 G .033(ys \215agged with a).1 F F5(+)2.533 E F0 2.533
+(,a)C .033(nd the pre)-2.533 F .033(vious job with a)-.25 F F5<ad>2.533
+E F0 5.033(.A)C .033(single % \(with no accompan)-2.5 F .032
+(ying job speci-)-.15 F(\214cation\) also refers to the current job)108
+417.6 Q(.)-.4 E .443
+(Simply naming a job can be used to bring it into the fore)108 434.4 R
+(ground:)-.15 E F5(%1)2.944 E F0 .444(is a synon)2.944 F .444(ym for)
+-.15 F F5 -.63(``)2.944 G .444(fg %1').63 F(')-.63 E F0 2.944(,b)C
+(ringing)-2.944 E 1.473(job 1 from the background into the fore)108
+446.4 R 3.973(ground. Similarly)-.15 F(,)-.65 E F5 -.63(``)3.972 G 1.472
+(%1 &').63 F(')-.63 E F0 1.472(resumes job 1 in the background,)3.972 F
+(equi)108 458.4 Q -.25(va)-.25 G(lent to).25 E F5 -.63(``)2.5 G(bg %1')
+.63 E(')-.63 E F0(.)A .13(The shell learns immediately whene)108 475.2 R
+-.15(ve)-.25 G 2.63(raj).15 G .13(ob changes state.)-2.63 F(Normally)
+5.131 E(,)-.65 E F5(bash)2.631 E F0 -.1(wa)2.631 G .131
+(its until it is about to print a).1 F .158
+(prompt before reporting changes in a job')108 487.2 R 2.658(ss)-.55 G
+.158(tatus so as to not interrupt an)-2.658 F 2.657(yo)-.15 G .157
+(ther output.)-2.657 F .157(If the)5.157 F F5<ad62>2.657 E F0 .157
+(option to)2.657 F(the)108 499.2 Q F5(set)2.647 E F0 -.2(bu)2.647 G .147
+(iltin command is enabled,).2 F F5(bash)2.647 E F0 .148
+(reports such changes immediately)2.648 F 5.148(.A)-.65 G .448 -.15
+(ny t)-5.148 H .148(rap on).15 F F2(SIGCHLD)2.648 E F0 .148(is e)2.398 F
+-.15(xe)-.15 G(-).15 E(cuted for each child that e)108 511.2 Q(xits.)
+-.15 E .033(If an attempt to e)108 528 R(xit)-.15 E F5(bash)2.533 E F0
+.033(is made while jobs are stopped \(or)2.533 F 2.532(,i)-.4 G 2.532
+(ft)-2.532 G(he)-2.532 E F5(checkjobs)2.532 E F0 .032
+(shell option has been enabled)2.532 F 1.002(using the)108 540 R F5
+(shopt)3.502 E F0 -.2(bu)3.502 G 1.002
+(iltin, running\), the shell prints a w).2 F 1.002
+(arning message, and, if the)-.1 F F5(checkjobs)3.503 E F0 1.003
+(option is en-)3.503 F .956(abled, lists the jobs and their statuses.)
+108 552 R(The)5.955 E F5(jobs)3.455 E F0 .955
+(command may then be used to inspect their status.)3.455 F .955(If a)
+5.955 F .603(second attempt to e)108 564 R .604
+(xit is made without an interv)-.15 F .604
+(ening command, the shell does not print another w)-.15 F(arning,)-.1 E
+(and an)108 576 Q 2.5(ys)-.15 G(topped jobs are terminated.)-2.5 E .645
+(When the shell is w)108 592.8 R .645
+(aiting for a job or process using the)-.1 F F5(wait)3.144 E F0 -.2(bu)
+3.144 G .644(iltin, and job control is enabled,).2 F F5(wait)3.144 E F0
+(will)3.144 E .282(return when the job changes state. The)108 604.8 R F5
+<ad66>2.782 E F0 .282(option causes)2.782 F F5(wait)2.782 E F0 .282
+(to w)2.782 F .282(ait until the job or process terminates be-)-.1 F
+(fore returning.)108 616.8 Q/F6 10.95/Times-Bold@0 SF(PR)72 633.6 Q
+(OMPTING)-.329 E F0 .645(When e)108 645.6 R -.15(xe)-.15 G .645
+(cuting interacti).15 F -.15(ve)-.25 G(ly).15 E(,)-.65 E F5(bash)3.145 E
+F0 .645(displays the primary prompt)3.145 F F2(PS1)3.145 E F0 .645
+(when it is ready to read a command,)2.895 F .427
+(and the secondary prompt)108 657.6 R F2(PS2)2.927 E F0 .427
+(when it needs more input to complete a command.)2.677 F F5(Bash)5.428 E
+F0(displays)2.928 E F2(PS0)2.928 E F0(after)2.678 E .038
+(it reads a command b)108 669.6 R .038(ut before e)-.2 F -.15(xe)-.15 G
+.038(cuting it.).15 F F5(Bash)5.038 E F0(displays)2.537 E F2(PS4)2.537 E
+F0 .037(as described abo)2.287 F .337 -.15(ve b)-.15 H .037
+(efore tracing each com-).15 F 1.121(mand when the)108 681.6 R F5<ad78>
+3.621 E F0 1.122(option is enabled.)3.621 F F5(Bash)6.122 E F0(allo)
+3.622 E 1.122(ws these prompt strings to be customized by inserting a)
+-.25 F(number of backslash-escaped special characters that are decoded \
+as follo)108 693.6 Q(ws:)-.25 E F5(\\a)144 705.6 Q F0
+(an ASCII bell character \(07\))180 705.6 Q F5(\\d)144 717.6 Q F0
+(the date in "W)180 717.6 Q(eekday Month Date" format \(e.g., "T)-.8 E
+(ue May 26"\))-.45 E(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(38)
+190.395 E 0 Cg EP
+%%Page: 39 39
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(\\D{)144 84 Q/F2 10/Times-Italic@0 SF(format)A F1(})A F0(the)180 96 Q
+F2(format)3.927 E F0 1.427(is passed to)3.927 F F2(strftime)3.927 E F0
+1.427(\(3\) and the result is inserted into the prompt string; an)B
+(empty)180 108 Q F2(format)2.5 E F0
+(results in a locale-speci\214c time representation.)2.5 E
+(The braces are required)5 E F1(\\e)144 120 Q F0
+(an ASCII escape character \(033\))180 120 Q F1(\\h)144 132 Q F0
+(the hostname up to the \214rst `.)180 132 Q(')-.7 E F1(\\H)144 144 Q F0
+(the hostname)180 144 Q F1(\\j)144 156 Q F0
+(the number of jobs currently managed by the shell)180 156 Q F1(\\l)144
+168 Q F0(the basename of the shell')180 168 Q 2.5(st)-.55 G(erminal de)
+-2.5 E(vice name)-.25 E F1(\\n)144 180 Q F0(ne)180 180 Q(wline)-.25 E F1
+(\\r)144 192 Q F0(carriage return)180 192 Q F1(\\s)144 204 Q F0
+(the name of the shell, the basename of)180 204 Q F1($0)2.5 E F0
+(\(the portion follo)2.5 E(wing the \214nal slash\))-.25 E F1(\\t)144
+216 Q F0(the current time in 24-hour HH:MM:SS format)180 216 Q F1(\\T)
+144 228 Q F0(the current time in 12-hour HH:MM:SS format)180 228 Q F1
+(\\@)144 240 Q F0(the current time in 12-hour am/pm format)180 240 Q F1
+(\\A)144 252 Q F0(the current time in 24-hour HH:MM format)180 252 Q F1
+(\\u)144 264 Q F0(the username of the current user)180 264 Q F1(\\v)144
+276 Q F0(the v)180 276 Q(ersion of)-.15 E F1(bash)2.5 E F0
+(\(e.g., 2.00\))2.5 E F1(\\V)144 288 Q F0(the release of)180 288 Q F1
+(bash)2.5 E F0 2.5(,v)C(ersion + patch le)-2.65 E -.15(ve)-.25 G 2.5
+(l\().15 G(e.g., 2.00.0\))-2.5 E F1(\\w)144 300 Q F0 .115(the current w)
+180 300 R .115(orking directory)-.1 F 2.615(,w)-.65 G(ith)-2.615 E/F3 9
+/Times-Bold@0 SF($HOME)2.615 E F0(abbre)2.365 E .116
+(viated with a tilde \(uses the v)-.25 F .116(alue of the)-.25 F F3(PR)
+180 312 Q(OMPT_DIR)-.27 E(TRIM)-.36 E F0 -.25(va)2.25 G(riable\)).25 E
+F1(\\W)144 324 Q F0(the basename of the current w)180 324 Q
+(orking directory)-.1 E 2.5(,w)-.65 G(ith)-2.5 E F3($HOME)2.5 E F0
+(abbre)2.25 E(viated with a tilde)-.25 E F1(\\!)144 336 Q F0
+(the history number of this command)180 336 Q F1(\\#)144 348 Q F0
+(the command number of this command)180 348 Q F1(\\$)144 360 Q F0
+(if the ef)180 360 Q(fecti)-.25 E .3 -.15(ve U)-.25 H(ID is 0, a).15 E
+F1(#)2.5 E F0 2.5(,o)C(therwise a)-2.5 E F1($)2.5 E(\\)144 372 Q F2(nnn)
+A F0(the character corresponding to the octal number)180 372 Q F2(nnn)
+2.5 E F1(\\\\)144 384 Q F0 2.5(ab)180 384 S(ackslash)-2.5 E F1(\\[)144
+396 Q F0(be)180 396 Q 1.257(gin a sequence of non-printing characters, \
+which could be used to embed a terminal)-.15 F
+(control sequence into the prompt)180 408 Q F1(\\])144 420 Q F0
+(end a sequence of non-printing characters)180 420 Q .119
+(The command number and the history number are usually dif)108 436.8 R
+.12(ferent: the history number of a command is its)-.25 F .547(position\
+ in the history list, which may include commands restored from the hist\
+ory \214le \(see)108 448.8 R F3(HIST)3.046 E(OR)-.162 E(Y)-.315 E F0
+(be-)2.796 E(lo)108 460.8 Q .354(w\), while the command number is the p\
+osition in the sequence of commands e)-.25 F -.15(xe)-.15 G .355
+(cuted during the current).15 F .823(shell session.)108 472.8 R .822
+(After the string is decoded, it is e)5.823 F .822
+(xpanded via parameter e)-.15 F .822(xpansion, command substitution,)
+-.15 F .682(arithmetic e)108 484.8 R .682(xpansion, and quote remo)-.15
+F -.25(va)-.15 G .682(l, subject to the v).25 F .683(alue of the)-.25 F
+F1(pr)3.183 E(omptv)-.18 E(ars)-.1 E F0 .683(shell option \(see the de-)
+3.183 F 1.198(scription of the)108 496.8 R F1(shopt)3.698 E F0 1.198
+(command under)3.698 F F3 1.197(SHELL B)3.697 F(UIL)-.09 E 1.197
+(TIN COMMANDS)-.828 F F0(belo)3.447 E 3.697(w\). This)-.25 F 1.197
+(can ha)3.697 F 1.497 -.15(ve u)-.2 H(nw).15 E(anted)-.1 E .322(side ef)
+108 508.8 R .322(fects if escaped portions of the string appear within \
+command substitution or contain characters spe-)-.25 F(cial to w)108
+520.8 Q(ord e)-.1 E(xpansion.)-.15 E/F4 10.95/Times-Bold@0 SF(READLINE)
+72 537.6 Q F0 .151
+(This is the library that handles reading input when using an interacti)
+108 549.6 R .45 -.15(ve s)-.25 H .15(hell, unless the).15 F F1
+(\255\255noediting)2.65 E F0(option)2.65 E .384(is gi)108 561.6 R -.15
+(ve)-.25 G 2.884(na).15 G 2.884(ts)-2.884 G .384(hell in)-2.884 F -.2
+(vo)-.4 G 2.884(cation. Line).2 F .384
+(editing is also used when using the)2.884 F F1<ad65>2.885 E F0 .385
+(option to the)2.885 F F1 -.18(re)2.885 G(ad).18 E F0 -.2(bu)2.885 G
+2.885(iltin. By).2 F(de-)2.885 E -.1(fa)108 573.6 S 1.407
+(ult, the line editing commands are similar to those of Emacs.).1 F
+3.906(Av)6.406 G 1.406(i-style line editing interf)-3.906 F 1.406
+(ace is also)-.1 F -.2(av)108 585.6 S 3.35(ailable. Line)-.05 F .85
+(editing can be enabled at an)3.35 F 3.35(yt)-.15 G .85(ime using the)
+-3.35 F F1 .85(\255o emacs)3.35 F F0(or)3.35 E F1 .85(\255o vi)3.35 F F0
+.85(options to the)3.35 F F1(set)3.35 E F0 -.2(bu)3.35 G(iltin).2 E
+(\(see)108 597.6 Q F3 .763(SHELL B)3.263 F(UIL)-.09 E .763(TIN COMMANDS)
+-.828 F F0(belo)3.013 E 3.263(w\). T)-.25 F 3.263(ot)-.8 G .763(urn of)
+-3.263 F 3.263(fl)-.25 G .763
+(ine editing after the shell is running, use the)-3.263 F F1(+o)3.262 E
+(emacs)108 609.6 Q F0(or)2.5 E F1(+o vi)2.5 E F0(options to the)2.5 E F1
+(set)2.5 E F0 -.2(bu)2.5 G(iltin.).2 E F1(Readline Notation)87 626.4 Q
+F0 .463(In this section, the Emacs-style notation is used to denote k)
+108 638.4 R -.15(ey)-.1 G(strok).15 E 2.963(es. Control)-.1 F -.1(ke)
+2.963 G .463(ys are denoted by C\255)-.05 F F2 -.1(ke)C(y)-.2 E F0(,)A
+1.153(e.g., C\255n means Control\255N.)108 650.4 R(Similarly)6.153 E(,)
+-.65 E F2(meta)4.033 E F0 -.1(ke)3.913 G 1.153(ys are denoted by M\255)
+-.05 F F2 -.1(ke)C(y)-.2 E F0 3.652(,s)C 3.652(oM)-3.652 G 1.152
+(\255x means Meta\255X.)-3.652 F(\(On)6.152 E -.1(ke)108 662.4 S .83
+(yboards without a)-.05 F F2(meta)3.71 E F0 -.1(ke)3.59 G 2.13 -.65
+(y, M)-.05 H<ad>.65 E F2(x)A F0 .83(means ESC)3.33 F F2(x)3.33 E F0 3.33
+(,i)C .831(.e., press the Escape k)-3.33 F 1.131 -.15(ey t)-.1 H .831
+(hen the).15 F F2(x)4.101 E F0 -.1(ke)3.861 G 4.631 -.65(y. T)-.05 H
+.831(his mak).65 F(es)-.1 E .6(ESC the)108 674.4 R F2 .6(meta pr)3.1 F
+(e\214x)-.37 E F0 5.6(.T)C .6(he combination M\255C\255)-5.6 F F2(x)A F0
+.599(means ESC\255Control\255)3.099 F F2(x)A F0 3.099(,o)C 3.099(rp)
+-3.099 G .599(ress the Escape k)-3.099 F .899 -.15(ey t)-.1 H .599
+(hen hold).15 F(the Control k)108 686.4 Q .3 -.15(ey w)-.1 H
+(hile pressing the).15 E F2(x)3.27 E F0 -.1(ke)3.03 G -.65(y.)-.05 G(\))
+.65 E .595(Readline commands may be gi)108 703.2 R -.15(ve)-.25 G 3.096
+(nn).15 G(umeric)-3.096 E F2(ar)3.426 E(guments)-.37 E F0 3.096(,w).27 G
+.596(hich normally act as a repeat count.)-3.096 F(Sometimes,)5.596 E
+(ho)108 715.2 Q(we)-.25 E -.15(ve)-.25 G 1.419 -.4(r, i).15 H 3.119(ti)
+.4 G 3.119(st)-3.119 G .619(he sign of the ar)-3.119 F .619
+(gument that is signi\214cant.)-.18 F -.15(Pa)5.619 G .619(ssing a ne)
+.15 F -.05(ga)-.15 G(ti).05 E .919 -.15(ve a)-.25 H -.18(rg).15 G .619
+(ument to a command that).18 F 2.938(acts in the forw)108 727.2 R 2.938
+(ard direction \(e.g.,)-.1 F F1(kill\255line)5.438 E F0 5.438(\)c)C
+2.938(auses that command to act in a backw)-5.438 F 2.938
+(ard direction.)-.1 F(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E
+(39)190.395 E 0 Cg EP
+%%Page: 40 40
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E
+(Commands whose beha)108 84 Q(vior with ar)-.2 E(guments de)-.18 E
+(viates from this are noted belo)-.25 E -.65(w.)-.25 G .812
+(When a command is described as)108 100.8 R/F1 10/Times-Italic@0 SF
+(killing)3.311 E F0(te)3.311 E .811(xt, the te)-.15 F .811
+(xt deleted is sa)-.15 F -.15(ve)-.2 G 3.311(df).15 G .811
+(or possible future retrie)-3.311 F -.25(va)-.25 G 3.311(l\().25 G F1
+(yank-)-3.311 E(ing)108 112.8 Q F0 2.529(\). The)B .029(killed te)2.529
+F .029(xt is sa)-.15 F -.15(ve)-.2 G 2.529(di).15 G 2.529(na)-2.529 G F1
+.029(kill ring)B F0 5.029(.C)C(onsecuti)-5.029 E .329 -.15(ve k)-.25 H
+.029(ills cause the te).15 F .029(xt to be accumulated into one unit,)
+-.15 F .567(which can be yank)108 124.8 R .567(ed all at once.)-.1 F
+.567(Commands which do not kill te)5.567 F .567
+(xt separate the chunks of te)-.15 F .567(xt on the kill)-.15 F(ring.)
+108 136.8 Q/F2 10/Times-Bold@0 SF(Readline Initialization)87 153.6 Q F0
+.091(Readline is customized by putting commands in an initialization \
+\214le \(the)108 165.6 R F1(inputr)2.591 E(c)-.37 E F0 2.591
+(\214le\). The)2.591 F .092(name of this \214le)2.591 F .573(is tak)108
+177.6 R .573(en from the v)-.1 F .573(alue of the)-.25 F/F3 9
+/Times-Bold@0 SF(INPUTRC)3.073 E F0 -.25(va)2.823 G 3.073(riable. If).25
+F .573(that v)3.073 F .573(ariable is unset, the def)-.25 F .573
+(ault is)-.1 F F1(~/.inputr)2.573 E(c)-.37 E F0 5.572(.I).31 G 3.072(ft)
+-5.572 G(hat)-3.072 E 3.061(\214le does)108 189.6 R .561(not e)3.061 F
+.562(xist or cannot be read, the ultimate def)-.15 F .562(ault is)-.1 F
+F1(/etc/inputr)4.212 E(c)-.37 E F0 5.562(.W).31 G .562
+(hen a program which uses the)-5.562 F .175(readline library starts up,\
+ the initialization \214le is read, and the k)108 201.6 R .474 -.15
+(ey b)-.1 H .174(indings and v).15 F .174(ariables are set.)-.25 F .174
+(There are)5.174 F .238(only a fe)108 213.6 R 2.738(wb)-.25 G .238
+(asic constructs allo)-2.738 F .239
+(wed in the readline initialization \214le.)-.25 F .239
+(Blank lines are ignored.)5.239 F .239(Lines be)5.239 F(gin-)-.15 E .554
+(ning with a)108 225.6 R F2(#)3.054 E F0 .554(are comments.)3.054 F .554
+(Lines be)5.554 F .554(ginning with a)-.15 F F2($)3.054 E F0 .554
+(indicate conditional constructs.)3.054 F .553(Other lines denote)5.553
+F -.1(ke)108 237.6 S 2.5(yb)-.05 G(indings and v)-2.5 E
+(ariable settings.)-.25 E .986(The def)108 254.4 R .986(ault k)-.1 F
+-.15(ey)-.1 G .987(-bindings may be changed with an).15 F F1(inputr)
+3.497 E(c)-.37 E F0 3.487(\214le. Other)3.797 F .987
+(programs that use this library may)3.487 F(add their o)108 266.4 Q
+(wn commands and bindings.)-.25 E -.15(Fo)108 283.2 S 2.5(re).15 G
+(xample, placing)-2.65 E(M\255Control\255u: uni)144 300 Q -.15(ve)-.25 G
+(rsal\255ar).15 E(gument)-.18 E(or)108 312 Q(C\255Meta\255u: uni)144 324
+Q -.15(ve)-.25 G(rsal\255ar).15 E(gument)-.18 E(into the)108 336 Q F1
+(inputr)2.51 E(c)-.37 E F0 -.1(wo)2.81 G(uld mak).1 E 2.5(eM)-.1 G
+(\255C\255u e)-2.5 E -.15(xe)-.15 G(cute the readline command).15 E F1
+(univer)2.58 E(sal\255ar)-.1 E(gument)-.37 E F0(.).68 E 1.011(The follo)
+108 352.8 R 1.011(wing symbolic character names are recognized:)-.25 F
+F1 -.4(RU)3.511 G(BOUT).4 E F0(,)1.27 E F1(DEL)4.091 E F0(,).53 E F1
+(ESC)4.021 E F0(,).72 E F1(LFD)4.091 E F0(,).28 E F1(NEWLINE)4.21 E F0
+(,).73 E F1(RET)4.14 E F0(,)1.27 E F1(RETURN)108.63 364.8 Q F0(,)1.1 E
+F1(SPC)2.83 E F0(,).72 E F1(SP)2.83 E -.3(AC)-.9 G(E).3 E F0 2.5(,a).73
+G(nd)-2.5 E F1 -.5(TA)2.5 G(B).5 E F0(.).27 E .209
+(In addition to command names, readline allo)108 381.6 R .209(ws k)-.25
+F -.15(ey)-.1 G 2.709(st).15 G 2.709(ob)-2.709 G 2.709(eb)-2.709 G .209
+(ound to a string that is inserted when the k)-2.709 F .509 -.15(ey i)
+-.1 H(s).15 E(pressed \(a)108 393.6 Q F1(macr)2.5 E(o)-.45 E F0(\).)A F2
+(Readline K)87 410.4 Q(ey Bindings)-.25 E F0 .366
+(The syntax for controlling k)108 422.4 R .666 -.15(ey b)-.1 H .366
+(indings in the).15 F F1(inputr)2.876 E(c)-.37 E F0 .366
+(\214le is simple.)3.176 F .366(All that is required is the name of the)
+5.366 F .263(command or the te)108 434.4 R .264(xt of a macro and a k)
+-.15 F .564 -.15(ey s)-.1 H .264(equence to which it should be bound.)
+.15 F .264(The name may be speci-)5.264 F .139(\214ed in one of tw)108
+446.4 R 2.638(ow)-.1 G .138(ays: as a symbolic k)-2.738 F .438 -.15
+(ey n)-.1 H .138(ame, possibly with).15 F F1(Meta\255)2.638 E F0(or)
+2.638 E F1(Contr)2.638 E(ol\255)-.45 E F0(pre\214x)2.638 E .138
+(es, or as a k)-.15 F .438 -.15(ey s)-.1 H(e-).15 E(quence.)108 458.4 Q
+.16(When using the form)108 475.2 R F2 -.1(ke)2.66 G(yname).1 E F0(:)A
+F1(function\255name).833 E F0(or)2.66 E F1(macr)2.66 E(o)-.45 E F0(,)A
+F1 -.1(ke)2.66 G(yname)-.2 E F0 .161(is the name of a k)2.84 F .461 -.15
+(ey s)-.1 H .161(pelled out in Eng-).15 F 2.5(lish. F)108 487.2 R(or e)
+-.15 E(xample:)-.15 E(Control-u: uni)144 511.2 Q -.15(ve)-.25 G
+(rsal\255ar).15 E(gument)-.18 E(Meta-Rubout: backw)144 523.2 Q
+(ard-kill-w)-.1 E(ord)-.1 E(Control-o: "> output")144 535.2 Q .699
+(In the abo)108 552 R .998 -.15(ve ex)-.15 H(ample,).15 E F1(C\255u)
+3.038 E F0 .698(is bound to the function)3.448 F F2(uni)3.198 E -.1(ve)
+-.1 G(rsal\255ar).1 E(gument)-.1 E F0(,)A F1(M\255DEL)3.878 E F0 .698
+(is bound to the func-)3.728 F(tion)108 564 Q F2(backward\255kill\255w)
+2.758 E(ord)-.1 E F0 2.758(,a)C(nd)-2.758 E F1(C\255o)2.598 E F0 .258
+(is bound to run the macro e)2.938 F .259
+(xpressed on the right hand side \(that is, to)-.15 F(insert the te)108
+576 Q(xt)-.15 E/F4 10/Courier@0 SF 6(>o)2.5 G(utput)-6 E F0
+(into the line\).)2.5 E .056(In the second form,)108 592.8 R F2("k)2.556
+E(eyseq")-.1 E F0(:)A F1(function\255name).833 E F0(or)2.556 E F1(macr)
+2.556 E(o)-.45 E F0(,)A F2 -.1(ke)2.556 G(yseq).1 E F0(dif)2.555 E .055
+(fers from)-.25 F F2 -.1(ke)2.555 G(yname).1 E F0(abo)2.555 E .355 -.15
+(ve i)-.15 H 2.555(nt).15 G .055(hat strings)-2.555 F 1.284
+(denoting an entire k)108 604.8 R 1.584 -.15(ey s)-.1 H 1.284(equence m\
+ay be speci\214ed by placing the sequence within double quotes.).15 F
+(Some)6.284 E .386(GNU Emacs style k)108 616.8 R .686 -.15(ey e)-.1 H
+.385(scapes can be used, as in the follo).15 F .385(wing e)-.25 F .385
+(xample, b)-.15 F .385(ut the symbolic character names)-.2 F
+(are not recognized.)108 628.8 Q("\\C\255u": uni)144 652.8 Q -.15(ve)
+-.25 G(rsal\255ar).15 E(gument)-.18 E
+("\\C\255x\\C\255r": re\255read\255init\255\214le)144 664.8 Q
+("\\e[11~": "Function K)144 676.8 Q .3 -.15(ey 1)-.25 H(").15 E .314
+(In this e)108 693.6 R(xample,)-.15 E F1(C\255u)2.654 E F0 .314(is ag)
+3.064 F .315(ain bound to the function)-.05 F F2(uni)2.815 E -.1(ve)-.1
+G(rsal\255ar).1 E(gument)-.1 E F0(.)A F1 .315(C\255x C\255r)5.155 F F0
+.315(is bound to the func-)3.545 F(tion)108 705.6 Q F2 -.18(re)2.5 G
+<ad72>.18 E(ead\255init\255\214le)-.18 E F0 2.5(,a)C(nd)-2.5 E F1
+(ESC [ 1 1 ~)3.01 E F0(is bound to insert the te)3.94 E(xt)-.15 E F4
+(Function Key 1)2.5 E F0(.)A
+(The full set of GNU Emacs style escape sequences is)108 722.4 Q
+(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(40)190.395 E 0 Cg EP
+%%Page: 41 41
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF<5c43ad>144 84 Q F0(control pre\214x)180 84 Q F1<5c4dad>144 96 Q F0
+(meta pre\214x)180 96 Q F1(\\e)144 108 Q F0(an escape character)180 108
+Q F1(\\\\)144 120 Q F0(backslash)180 120 Q F1(\\")144 132 Q F0
+(literal ")180 132 Q F1<5c08>144 144 Q F0(literal \010)180 144 Q(In add\
+ition to the GNU Emacs style escape sequences, a second set of backslas\
+h escapes is a)108 160.8 Q -.25(va)-.2 G(ilable:).25 E F1(\\a)144 172.8
+Q F0(alert \(bell\))180 172.8 Q F1(\\b)144 184.8 Q F0(backspace)180
+184.8 Q F1(\\d)144 196.8 Q F0(delete)180 196.8 Q F1(\\f)144 208.8 Q F0
+(form feed)180 208.8 Q F1(\\n)144 220.8 Q F0(ne)180 220.8 Q(wline)-.25 E
+F1(\\r)144 232.8 Q F0(carriage return)180 232.8 Q F1(\\t)144 244.8 Q F0
+(horizontal tab)180 244.8 Q F1(\\v)144 256.8 Q F0 -.15(ve)180 256.8 S
+(rtical tab).15 E F1(\\)144 268.8 Q/F2 10/Times-Italic@0 SF(nnn)A F0
+(the eight-bit character whose v)180 268.8 Q(alue is the octal v)-.25 E
+(alue)-.25 E F2(nnn)2.5 E F0(\(one to three digits\))2.5 E F1(\\x)144
+280.8 Q F2(HH)A F0(the eight-bit character whose v)180 280.8 Q
+(alue is the he)-.25 E(xadecimal v)-.15 E(alue)-.25 E F2(HH)2.5 E F0
+(\(one or tw)2.5 E 2.5(oh)-.1 G .3 -.15(ex d)-2.5 H(igits\)).15 E 1.142
+(When entering the te)108 297.6 R 1.141(xt of a macro, single or double\
+ quotes must be used to indicate a macro de\214nition.)-.15 F .089
+(Unquoted te)108 309.6 R .089(xt is assumed to be a function name.)-.15
+F .09(In the macro body)5.089 F 2.59(,t)-.65 G .09
+(he backslash escapes described abo)-2.59 F -.15(ve)-.15 G(are e)108
+321.6 Q 2.5(xpanded. Backslash)-.15 F(will quote an)2.5 E 2.5(yo)-.15 G
+(ther character in the macro te)-2.5 E(xt, including " and \010.)-.15 E
+F1(Bash)108 338.4 Q F0(allo)2.93 E .43(ws the current readline k)-.25 F
+.73 -.15(ey b)-.1 H .429(indings to be displayed or modi\214ed with the)
+.15 F F1(bind)2.929 E F0 -.2(bu)2.929 G .429(iltin command.).2 F .045
+(The editing mode may be switched during interacti)108 350.4 R .345 -.15
+(ve u)-.25 H .046(se by using the).15 F F1<ad6f>2.546 E F0 .046
+(option to the)2.546 F F1(set)2.546 E F0 -.2(bu)2.546 G .046
+(iltin command).2 F(\(see)108 362.4 Q/F3 9/Times-Bold@0 SF(SHELL B)2.5 E
+(UIL)-.09 E(TIN COMMANDS)-.828 E F0(belo)2.25 E(w\).)-.25 E F1
+(Readline V)87 379.2 Q(ariables)-.92 E F0 .044(Readline has v)108 391.2
+R .043(ariables that can be used to further customize its beha)-.25 F
+(vior)-.2 E 5.043(.A)-.55 G -.25(va)-2.5 G .043
+(riable may be set in the).25 F F2(inpu-)2.553 E(tr)108 403.2 Q(c)-.37 E
+F0(\214le with a statement of the form)2.81 E F1(set)144 420 Q F2
+(variable\255name value)2.5 E F0(or using the)108 432 Q F1(bind)2.5 E F0
+-.2(bu)2.5 G(iltin command \(see).2 E F3(SHELL B)2.5 E(UIL)-.09 E
+(TIN COMMANDS)-.828 E F0(belo)2.25 E(w\).)-.25 E .79
+(Except where noted, readline v)108 448.8 R .79(ariables can tak)-.25 F
+3.29(et)-.1 G .79(he v)-3.29 F(alues)-.25 E F1(On)3.29 E F0(or)3.29 E F1
+(Off)3.29 E F0 .79(\(without re)3.29 F -.05(ga)-.15 G .79(rd to case\).)
+.05 F(Unrecog-)5.79 E .449(nized v)108 460.8 R .448
+(ariable names are ignored.)-.25 F .448(When a v)5.448 F .448(ariable v)
+-.25 F .448(alue is read, empty or null v)-.25 F .448
+(alues, "on" \(case-insensi-)-.25 F(ti)108 472.8 Q -.15(ve)-.25 G .467
+(\), and "1" are equi).15 F -.25(va)-.25 G .468(lent to).25 F F1(On)
+2.968 E F0 5.468(.A)C .468(ll other v)-5.468 F .468(alues are equi)-.25
+F -.25(va)-.25 G .468(lent to).25 F F1(Off)2.968 E F0 5.468(.T)C .468
+(he v)-5.468 F .468(ariables and their def)-.25 F(ault)-.1 E -.25(va)108
+484.8 S(lues are:).25 E F1(bell\255style \(audible\))108 501.6 Q F0 .011
+(Controls what happens when readline w)144 513.6 R .011
+(ants to ring the terminal bell.)-.1 F .01(If set to)5.01 F F1(none)2.51
+E F0 2.51(,r)C .01(eadline ne)-2.51 F -.15(ve)-.25 G(r).15 E .94
+(rings the bell.)144 525.6 R .94(If set to)5.94 F F1(visible)3.44 E F0
+3.44(,r)C .94(eadline uses a visible bell if one is a)-3.44 F -.25(va)
+-.2 G 3.44(ilable. If).25 F .94(set to)3.44 F F1(audible)3.44 E F0(,)A
+(readline attempts to ring the terminal')144 537.6 Q 2.5(sb)-.55 G(ell.)
+-2.5 E F1(bind\255tty\255special\255chars \(On\))108 549.6 Q F0 .056
+(If set to)144 561.6 R F1(On)2.556 E F0 2.556(,r)C .056(eadline attempt\
+s to bind the control characters treated specially by the k)-2.556 F
+(ernel')-.1 E 2.555(st)-.55 G(ermi-)-2.555 E(nal dri)144 573.6 Q -.15
+(ve)-.25 G 2.5(rt).15 G 2.5(ot)-2.5 G(heir readline equi)-2.5 E -.25(va)
+-.25 G(lents.).25 E F1(blink\255matching\255par)108 585.6 Q(en \(Off\))
+-.18 E F0 .21(If set to)144 597.6 R F1(On)2.71 E F0 2.71(,r)C .21
+(eadline attempts to brie\215y mo)-2.71 F .51 -.15(ve t)-.15 H .21
+(he cursor to an opening parenthesis when a closing).15 F
+(parenthesis is inserted.)144 609.6 Q F1(color)108 621.6 Q
+(ed\255completion\255pr)-.18 E(e\214x \(Off\))-.18 E F0 .515(If set to)
+144 633.6 R F1(On)3.015 E F0 3.015(,w)C .515(hen listing completions, r\
+eadline displays the common pre\214x of the set of possible)-3.015 F
+2.935(completions using a dif)144 645.6 R 2.935(ferent color)-.25 F
+7.936(.T)-.55 G 2.936(he color de\214nitions are tak)-7.936 F 2.936
+(en from the v)-.1 F 2.936(alue of the)-.25 F F1(LS_COLORS)144 657.6 Q
+F0(en)2.5 E(vironment v)-.4 E(ariable.)-.25 E F1(color)108 669.6 Q
+(ed\255stats \(Off\))-.18 E F0 1.58(If set to)144 681.6 R F1(On)4.08 E
+F0 4.08(,r)C 1.579(eadline displays possible completions using dif)-4.08
+F 1.579(ferent colors to indicate their \214le)-.25 F 2.5(type. The)144
+693.6 R(color de\214nitions are tak)2.5 E(en from the v)-.1 E
+(alue of the)-.25 E F1(LS_COLORS)2.5 E F0(en)2.5 E(vironment v)-.4 E
+(ariable.)-.25 E F1(comment\255begin \(`)108 705.6 Q(`#')-.63 E('\))-.63
+E F0 .884(The string that is inserted when the readline)144 717.6 R F1
+(insert\255comment)3.385 E F0 .885(command is e)3.385 F -.15(xe)-.15 G
+3.385(cuted. This).15 F(com-)3.385 E(mand is bound to)144 729.6 Q F1
+(M\255#)2.5 E F0(in emacs mode and to)2.5 E F1(#)2.5 E F0
+(in vi command mode.)2.5 E(GNU Bash 5.1)72 768 Q(2020 October 29)141.235
+E(41)190.395 E 0 Cg EP
+%%Page: 42 42
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(completion\255display\255width \(\2551\))108 84 Q F0 1.453(The numbe\
+r of screen columns used to display possible matches when performing co\
+mpletion.)144 96 R .193(The v)144 108 R .193(alue is ignored if it is l\
+ess than 0 or greater than the terminal screen width.)-.25 F 2.694(Av)
+5.194 G .194(alue of 0 will)-2.944 F
+(cause matches to be displayed one per line.)144 120 Q(The def)5 E
+(ault v)-.1 E(alue is \2551.)-.25 E F1(completion\255ignor)108 132 Q
+(e\255case \(Off\))-.18 E F0(If set to)144 144 Q F1(On)2.5 E F0 2.5(,r)C
+(eadline performs \214lename matching and completion in a case\255insen\
+siti)-2.5 E .3 -.15(ve f)-.25 H(ashion.).05 E F1
+(completion\255map\255case \(Off\))108 156 Q F0 .094(If set to)144 168 R
+F1(On)2.593 E F0 2.593(,a)C(nd)-2.593 E F1(completion\255ignor)2.593 E
+(e\255case)-.18 E F0 .093(is enabled, readline treats h)2.593 F .093
+(yphens \()-.05 F/F2 10/Times-Italic@0 SF<ad>A F0 2.593(\)a)C .093
+(nd underscores)-2.593 F(\()144 180 Q F2(_)A F0 2.5(\)a)C 2.5(se)-2.5 G
+(qui)-2.5 E -.25(va)-.25 G(lent when performing case\255insensiti).25 E
+.3 -.15(ve \214)-.25 H(lename matching and completion.).15 E F1
+(completion\255pr)108 192 Q(e\214x\255display\255length \(0\))-.18 E F0
+.829(The length in characters of the common pre\214x of a list of possi\
+ble completions that is displayed)144 204 R 1.275
+(without modi\214cation.)144 216 R 1.275(When set to a v)6.275 F 1.274
+(alue greater than zero, common pre\214x)-.25 F 1.274
+(es longer than this)-.15 F -.25(va)144 228 S(lue are replaced with an \
+ellipsis when displaying possible completions.).25 E F1
+(completion\255query\255items \(100\))108 240 Q F0 .529
+(This determines when the user is queried about vie)144 252 R .53
+(wing the number of possible completions gen-)-.25 F .561(erated by the)
+144 264 R F1(possible\255completions)3.061 E F0 3.061(command. It)3.061
+F .561(may be set to an)3.061 F 3.06(yi)-.15 G(nte)-3.06 E .56(ger v)
+-.15 F .56(alue greater than or)-.25 F .782(equal to zero.)144 276 R
+.783(If the number of possible completions is greater than or equal to \
+the v)5.782 F .783(alue of this)-.25 F -.25(va)144 288 S .368
+(riable, readline will ask whether or not the user wishes to vie).25 F
+2.867(wt)-.25 G .367(hem; otherwise the)-2.867 F 2.867(ya)-.15 G .367
+(re simply)-2.867 F(listed on the terminal.)144 300 Q F1(con)108 312 Q
+-.1(ve)-.4 G(rt\255meta \(On\)).1 E F0 .612(If set to)144 324 R F1(On)
+3.112 E F0 3.112(,r)C .613(eadline will con)-3.112 F -.15(ve)-.4 G .613
+(rt characters with the eighth bit set to an ASCII k).15 F .913 -.15
+(ey s)-.1 H .613(equence by).15 F .541
+(stripping the eighth bit and pre\214xing an escape character \(in ef)
+144 336 R .541(fect, using escape as the)-.25 F F2 .541(meta pr)3.041 F
+(e-)-.37 E<8c78>144 348 Q F0 2.5(\). The)B(def)2.5 E(ault is)-.1 E F2
+(On)2.5 E F0 2.5(,b)C(ut readline will set it to)-2.7 E F2(Of)2.5 E(f)
+-.18 E F0(if the locale contains eight-bit characters.)2.5 E F1
+(disable\255completion \(Off\))108 360 Q F0 .038(If set to)144 372 R F1
+(On)2.538 E F0 2.538(,r)C .038(eadline will inhibit w)-2.538 F .038
+(ord completion.)-.1 F .038
+(Completion characters will be inserted into the)5.038 F(line as if the)
+144 384 Q 2.5(yh)-.15 G(ad been mapped to)-2.5 E F1(self-insert)2.5 E F0
+(.)A F1(echo\255contr)108 396 Q(ol\255characters \(On\))-.18 E F0 1.211
+(When set to)144 408 R F1(On)3.711 E F0 3.711(,o)C 3.711(no)-3.711 G
+1.211(perating systems that indicate the)-3.711 F 3.711(ys)-.15 G 1.21
+(upport it, readline echoes a character)-3.711 F
+(corresponding to a signal generated from the k)144 420 Q -.15(ey)-.1 G
+(board.).15 E F1(editing\255mode \(emacs\))108 432 Q F0 .141
+(Controls whether readline be)144 444 R .141(gins with a set of k)-.15 F
+.441 -.15(ey b)-.1 H .141(indings similar to).15 F F2(Emacs)2.642 E F0
+(or)2.642 E F2(vi)2.642 E F0(.)A F1(editing\255mode)5.142 E F0
+(can be set to either)144 456 Q F1(emacs)2.5 E F0(or)2.5 E F1(vi)2.5 E
+F0(.)A F1(emacs\255mode\255string \(@\))108 468 Q F0 .518(If the)144 480
+R F2(show\255mode\255in\255pr)3.018 E(ompt)-.45 E F0 -.25(va)3.018 G
+.517(riable is enabled, this string is displayed immediately before the)
+.25 F .622
+(last line of the primary prompt when emacs editing mode is acti)144 492
+R -.15(ve)-.25 G 5.622(.T).15 G .622(he v)-5.622 F .622(alue is e)-.25 F
+.622(xpanded lik)-.15 F 3.122(ea)-.1 G -.1(ke)144 504 S 3.34(yb)-.05 G
+.839(inding, so the standard set of meta- and control pre\214x)-3.34 F
+.839(es and backslash escape sequences is)-.15 F -.2(av)144 516 S 2.798
+(ailable. Use)-.05 F .298(the \\1 and \\2 escapes to be)2.798 F .298
+(gin and end sequences of non-printing characters, which)-.15 F
+(can be used to embed a terminal control sequence into the mode string.)
+144 528 Q F1(enable\255brack)108 540 Q(eted\255paste \(On\))-.1 E F0
+1.222(When set to)144 552 R F1(On)3.721 E F0 3.721(,r)C 1.221
+(eadline will con\214gure the terminal in a w)-3.721 F 1.221
+(ay that will enable it to insert each)-.1 F .353
+(paste into the editing b)144 564 R(uf)-.2 E .353(fer as a single strin\
+g of characters, instead of treating each character as if)-.25 F .544
+(it had been read from the k)144 576 R -.15(ey)-.1 G 3.043(board. This)
+.15 F .543(can pre)3.043 F -.15(ve)-.25 G .543
+(nt pasted characters from being interpreted as).15 F(editing commands.)
+144 588 Q F1(enable\255k)108 600 Q(eypad \(Off\))-.1 E F0 .892
+(When set to)144 612 R F1(On)3.393 E F0 3.393(,r)C .893
+(eadline will try to enable the application k)-3.393 F -.15(ey)-.1 G
+.893(pad when it is called.).15 F .893(Some sys-)5.893 F
+(tems need this to enable the arro)144 624 Q 2.5(wk)-.25 G -.15(ey)-2.6
+G(s.).15 E F1(enable\255meta\255k)108 636 Q(ey \(On\))-.1 E F0 .64
+(When set to)144 648 R F1(On)3.14 E F0 3.14(,r)C .64
+(eadline will try to enable an)-3.14 F 3.14(ym)-.15 G .64
+(eta modi\214er k)-3.14 F .94 -.15(ey t)-.1 H .64
+(he terminal claims to support).15 F(when it is called.)144 660 Q
+(On man)5 E 2.5(yt)-.15 G(erminals, the meta k)-2.5 E .3 -.15(ey i)-.1 H
+2.5(su).15 G(sed to send eight-bit characters.)-2.5 E F1
+(expand\255tilde \(Off\))108 672 Q F0(If set to)144 684 Q F1(On)2.5 E F0
+2.5(,t)C(ilde e)-2.5 E(xpansion is performed when readline attempts w)
+-.15 E(ord completion.)-.1 E F1(history\255pr)108 696 Q(eser)-.18 E -.1
+(ve)-.1 G(\255point \(Off\)).1 E F0 .552(If set to)144 708 R F1(On)3.052
+E F0 3.052(,t)C .552(he history code attempts to place point at the sam\
+e location on each history line re-)-3.052 F(trie)144 720 Q -.15(ve)-.25
+G 2.5(dw).15 G(ith)-2.5 E F1(pr)2.5 E -.15(ev)-.18 G(ious-history).15 E
+F0(or)2.5 E F1(next-history)2.5 E F0(.)A(GNU Bash 5.1)72 768 Q
+(2020 October 29)141.235 E(42)190.395 E 0 Cg EP
+%%Page: 43 43
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(history\255size \(unset\))108 84 Q F0 .949
+(Set the maximum number of history entries sa)144 96 R -.15(ve)-.2 G
+3.448(di).15 G 3.448(nt)-3.448 G .948(he history list.)-3.448 F .948
+(If set to zero, an)5.948 F 3.448(ye)-.15 G(xisting)-3.598 E .482
+(history entries are deleted and no ne)144 108 R 2.982(we)-.25 G .483
+(ntries are sa)-2.982 F -.15(ve)-.2 G 2.983(d. If).15 F .483(set to a v)
+2.983 F .483(alue less than zero, the num-)-.25 F .278
+(ber of history entries is not limited.)144 120 R .277(By def)5.278 F
+.277(ault, the number of history entries is set to the v)-.1 F .277
+(alue of)-.25 F(the)144 132 Q F1(HISTSIZE)3.41 E F0 .91(shell v)3.41 F
+3.41(ariable. If)-.25 F .911(an attempt is made to set)3.41 F/F2 10
+/Times-Italic@0 SF(history\255size)3.411 E F0 .911(to a non-numeric v)
+3.411 F(alue,)-.25 E
+(the maximum number of history entries will be set to 500.)144 144 Q F1
+(horizontal\255scr)108 156 Q(oll\255mode \(Off\))-.18 E F0 .449
+(When set to)144 168 R F1(On)2.949 E F0 2.949(,m)C(ak)-2.949 E .448
+(es readline use a single line for display)-.1 F 2.948(,s)-.65 G .448
+(crolling the input horizontally on a)-2.948 F 1.194(single screen line\
+ when it becomes longer than the screen width rather than wrapping to a\
+ ne)144 180 R(w)-.25 E 2.5(line. This)144 192 R
+(setting is automatically enabled for terminals of height 1.)2.5 E F1
+(input\255meta \(Off\))108 204 Q F0 1.062(If set to)144 216 R F1(On)
+3.562 E F0 3.562(,r)C 1.061(eadline will enable eight-bit input \(that \
+is, it will not strip the eighth bit from the)-3.562 F .335
+(characters it reads\), re)144 228 R -.05(ga)-.15 G .335
+(rdless of what the terminal claims it can support.).05 F .336(The name)
+5.336 F F1(meta\255\215ag)2.836 E F0(is)2.836 E 2.865(as)144 240 S(ynon)
+-2.865 E .365(ym for this v)-.15 F 2.864(ariable. The)-.25 F(def)2.864 E
+.364(ault is)-.1 F F2(Of)2.864 E(f)-.18 E F0 2.864(,b)C .364
+(ut readline will set it to)-3.064 F F2(On)2.864 E F0 .364
+(if the locale contains)2.864 F(eight-bit characters.)144 252 Q F1
+(isear)108 264 Q(ch\255terminators \(`)-.18 E(`C\255[C\255J')-.63 E('\))
+-.63 E F0 .439(The string of characters that should terminate an increm\
+ental search without subsequently e)144 276 R -.15(xe)-.15 G(cut-).15 E
+.935(ing the character as a command.)144 288 R .935(If this v)5.935 F
+.935(ariable has not been gi)-.25 F -.15(ve)-.25 G 3.434(nav).15 G .934
+(alue, the characters)-3.684 F F2(ESC)3.434 E F0(and)144 300 Q F2
+(C\255J)2.5 E F0(will terminate an incremental search.)2.5 E F1 -.1(ke)
+108 312 S(ymap \(emacs\)).1 E F0 2.02(Set the current readline k)144 324
+R -.15(ey)-.1 G 4.521(map. The).15 F 2.021(set of v)4.521 F 2.021
+(alid k)-.25 F -.15(ey)-.1 G 2.021(map names is).15 F F2 2.021
+(emacs, emacs\255standar)4.521 F(d,)-.37 E .042
+(emacs\255meta, emacs\255ctlx, vi, vi\255command)144 336 R F0 2.542(,a)C
+(nd)-2.542 E F2(vi\255insert)2.832 E F0(.).68 E F2(vi)5.042 E F0 .042
+(is equi)2.542 F -.25(va)-.25 G .042(lent to).25 F F2(vi\255command)
+2.541 E F0(;)A F2(emacs)2.541 E F0 .448(is equi)144 348 R -.25(va)-.25 G
+.448(lent to).25 F F2(emacs\255standar)2.948 E(d)-.37 E F0 5.448(.T)C
+.448(he def)-5.448 F .448(ault v)-.1 F .449(alue is)-.25 F F2(emacs)
+3.139 E F0 2.949(;t).27 G .449(he v)-2.949 F .449(alue of)-.25 F F1
+(editing\255mode)2.949 E F0 .449(also af-)2.949 F(fects the def)144 360
+Q(ault k)-.1 E -.15(ey)-.1 G(map.).15 E F1 -.1(ke)108 372 S
+(yseq\255timeout \(500\)).1 E F0 .368(Speci\214es the duration)144 384 R
+F2 -.37(re)2.867 G(adline).37 E F0 .367(will w)2.867 F .367
+(ait for a character when reading an ambiguous k)-.1 F .667 -.15(ey s)
+-.1 H(equence).15 E .524(\(one that can form a complete k)144 396 R .824
+-.15(ey s)-.1 H .524(equence using the input read so f).15 F(ar)-.1 E
+3.025(,o)-.4 G 3.025(rc)-3.025 G .525(an tak)-3.025 F 3.025(ea)-.1 G
+.525(dditional in-)-3.025 F .807(put to complete a longer k)144 408 R
+1.106 -.15(ey s)-.1 H 3.306(equence\). If).15 F .806(no input is recei)
+3.306 F -.15(ve)-.25 G 3.306(dw).15 G .806(ithin the timeout,)-3.306 F
+F2 -.37(re)3.306 G(adline).37 E F0(will)3.306 E .906(use the shorter b)
+144 420 R .907(ut complete k)-.2 F 1.207 -.15(ey s)-.1 H 3.407
+(equence. The).15 F -.25(va)3.407 G .907
+(lue is speci\214ed in milliseconds, so a v).25 F .907(alue of)-.25 F
+.05(1000 means that)144 432 R F2 -.37(re)2.55 G(adline).37 E F0 .05
+(will w)2.55 F .05(ait one second for additional input.)-.1 F .05
+(If this v)5.05 F .05(ariable is set to a v)-.25 F(alue)-.25 E .051
+(less than or equal to zero, or to a non-numeric v)144 444 R(alue,)-.25
+E F2 -.37(re)2.551 G(adline).37 E F0 .051(will w)2.551 F .051
+(ait until another k)-.1 F .352 -.15(ey i)-.1 H 2.552(sp).15 G(ressed)
+-2.552 E(to decide which k)144 456 Q .3 -.15(ey s)-.1 H
+(equence to complete.).15 E F1(mark\255dir)108 468 Q(ectories \(On\))
+-.18 E F0(If set to)144 480 Q F1(On)2.5 E F0 2.5(,c)C
+(ompleted directory names ha)-2.5 E .3 -.15(ve a s)-.2 H(lash appended.)
+.15 E F1(mark\255modi\214ed\255lines \(Off\))108 492 Q F0(If set to)144
+504 Q F1(On)2.5 E F0 2.5(,h)C(istory lines that ha)-2.5 E .3 -.15(ve b)
+-.2 H(een modi\214ed are displayed with a preceding asterisk \().15 E F1
+(*)A F0(\).)A F1(mark\255symlink)108 516 Q(ed\255dir)-.1 E
+(ectories \(Off\))-.18 E F0 .175(If set to)144 528 R F1(On)2.675 E F0
+2.675(,c)C .175
+(ompleted names which are symbolic links to directories ha)-2.675 F .475
+-.15(ve a s)-.2 H .175(lash appended \(sub-).15 F(ject to the v)144 540
+Q(alue of)-.25 E F1(mark\255dir)2.5 E(ectories)-.18 E F0(\).)A F1
+(match\255hidden\255\214les \(On\))108 552 Q F0 .192(This v)144 564 R
+.192(ariable, when set to)-.25 F F1(On)2.692 E F0 2.692(,c)C .192
+(auses readline to match \214les whose names be)-2.692 F .193
+(gin with a `.)-.15 F 2.693('\()-.7 G(hidden)-2.693 E .457
+(\214les\) when performing \214lename completion.)144 576 R .456
+(If set to)5.456 F F1(Off)2.956 E F0 2.956(,t)C .456(he leading `.)
+-2.956 F 2.956('m)-.7 G .456(ust be supplied by the)-2.956 F
+(user in the \214lename to be completed.)144 588 Q F1
+(menu\255complete\255display\255pr)108 600 Q(e\214x \(Off\))-.18 E F0
+1.585(If set to)144 612 R F1(On)4.085 E F0 4.085(,m)C 1.585(enu complet\
+ion displays the common pre\214x of the list of possible completions)
+-4.085 F(\(which may be empty\) before c)144 624 Q
+(ycling through the list.)-.15 E F1(output\255meta \(Off\))108 636 Q F0
+.507(If set to)144 648 R F1(On)3.007 E F0 3.007(,r)C .507(eadline will \
+display characters with the eighth bit set directly rather than as a me\
+ta-)-3.007 F(pre\214x)144 660 Q .884(ed escape sequence.)-.15 F .884
+(The def)5.884 F .884(ault is)-.1 F F2(Of)3.384 E(f)-.18 E F0 3.384(,b)C
+.884(ut readline will set it to)-3.584 F F2(On)3.384 E F0 .885
+(if the locale contains)3.384 F(eight-bit characters.)144 672 Q F1
+(page\255completions \(On\))108 684 Q F0 .809(If set to)144 696 R F1(On)
+3.308 E F0 3.308(,r)C .808(eadline uses an internal)-3.308 F F2(mor)
+3.308 E(e)-.37 E F0(-lik)A 3.308(ep)-.1 G .808
+(ager to display a screenful of possible comple-)-3.308 F
+(tions at a time.)144 708 Q(GNU Bash 5.1)72 768 Q(2020 October 29)
+141.235 E(43)190.395 E 0 Cg EP
+%%Page: 44 44
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(print\255completions\255horizontally \(Off\))108 84 Q F0 .227
+(If set to)144 96 R F1(On)2.727 E F0 2.727(,r)C .227(eadline will displ\
+ay completions with matches sorted horizontally in alphabetical or)
+-2.727 F(-)-.2 E(der)144 108 Q 2.5(,r)-.4 G(ather than do)-2.5 E
+(wn the screen.)-.25 E F1 -2.29 -.18(re v)108 120 T
+(ert\255all\255at\255newline \(Off\)).08 E F0 .699(If set to)144 132 R
+F1(On)3.199 E F0 3.199(,r)C .699
+(eadline will undo all changes to history lines before returning when)
+-3.199 F F1(accept\255line)3.198 E F0(is)3.198 E -.15(exe)144 144 S
+2.686(cuted. By).15 F(def)2.686 E .186
+(ault, history lines may be modi\214ed and retain indi)-.1 F .186
+(vidual undo lists across calls to)-.25 F F1 -.18(re)144 156 S(adline)
+.18 E F0(.)A F1(sho)108 168 Q(w\255all\255if\255ambiguous \(Off\))-.1 E
+F0 .304(This alters the def)144 180 R .304(ault beha)-.1 F .304
+(vior of the completion functions.)-.2 F .304(If set to)5.304 F F1(On)
+2.804 E F0 2.803(,w)C .303(ords which ha)-2.903 F .603 -.15(ve m)-.2 H
+(ore).15 E 1.264(than one possible completion cause the matches to be l\
+isted immediately instead of ringing the)144 192 R(bell.)144 204 Q F1
+(sho)108 216 Q(w\255all\255if\255unmodi\214ed \(Off\))-.1 E F0 5.346
+(This alters the def)144 228 R 5.346(ault beha)-.1 F 5.345
+(vior of the completion functions in a f)-.2 F 5.345(ashion similar to)
+-.1 F F1(sho)144 240 Q(w\255all\255if\255ambiguous)-.1 E F0 6.69(.I)C
+4.19(fs)-6.69 G 1.691(et to)-4.19 F F1(On)4.191 E F0 4.191(,w)C 1.691
+(ords which ha)-4.291 F 1.991 -.15(ve m)-.2 H 1.691
+(ore than one possible completion).15 F 1.04(without an)144 252 R 3.54
+(yp)-.15 G 1.039
+(ossible partial completion \(the possible completions don')-3.54 F
+3.539(ts)-.18 G 1.039(hare a common pre\214x\))-3.539 F(cause the match\
+es to be listed immediately instead of ringing the bell.)144 264 Q F1
+(sho)108 276 Q(w\255mode\255in\255pr)-.1 E(ompt \(Off\))-.18 E F0 1.021
+(If set to)144 288 R F1(On)3.521 E F0 3.521(,a)C 1.022
+(dd a string to the be)-3.521 F 1.022
+(ginning of the prompt indicating the editing mode: emacs, vi)-.15 F
+(command, or vi insertion.)144 300 Q(The mode strings are user)5 E
+(-settable \(e.g.,)-.2 E/F2 10/Times-Italic@0 SF
+(emacs\255mode\255string)2.5 E F0(\).)A F1
+(skip\255completed\255text \(Off\))108 312 Q F0 .095(If set to)144 324 R
+F1(On)2.595 E F0 2.595(,t)C .095(his alters the def)-2.595 F .095
+(ault completion beha)-.1 F .094
+(vior when inserting a single match into the line.)-.2 F(It')144 336 Q
+2.545(so)-.55 G .045(nly acti)-2.545 F .345 -.15(ve w)-.25 H .046
+(hen performing completion in the middle of a w).15 F 2.546(ord. If)-.1
+F .046(enabled, readline does not)2.546 F 1.394(insert characters from \
+the completion that match characters after point in the w)144 348 R
+1.394(ord being com-)-.1 F(pleted, so portions of the w)144 360 Q
+(ord follo)-.1 E(wing the cursor are not duplicated.)-.25 E F1
+(vi\255cmd\255mode\255string \(\(cmd\)\))108 372 Q F0 .517(If the)144
+384 R F2(show\255mode\255in\255pr)3.017 E(ompt)-.45 E F0 -.25(va)3.017 G
+.518(riable is enabled, this string is displayed immediately before the)
+.25 F .475(last line of the primary prompt when vi editing mode is acti)
+144 396 R .775 -.15(ve a)-.25 H .475(nd in command mode.).15 F .475
+(The v)5.475 F(alue)-.25 E .33(is e)144 408 R .33(xpanded lik)-.15 F
+2.83(eak)-.1 G .63 -.15(ey b)-2.93 H .33
+(inding, so the standard set of meta- and control pre\214x).15 F .33
+(es and backslash es-)-.15 F .245(cape sequences is a)144 420 R -.25(va)
+-.2 G 2.745(ilable. Use).25 F .244(the \\1 and \\2 escapes to be)2.745 F
+.244(gin and end sequences of non-printing)-.15 F(characters, which can\
+ be used to embed a terminal control sequence into the mode string.)144
+432 Q F1(vi\255ins\255mode\255string \(\(ins\)\))108 444 Q F0 .517
+(If the)144 456 R F2(show\255mode\255in\255pr)3.017 E(ompt)-.45 E F0
+-.25(va)3.017 G .518
+(riable is enabled, this string is displayed immediately before the).25
+F .186(last line of the primary prompt when vi editing mode is acti)144
+468 R .486 -.15(ve a)-.25 H .186(nd in insertion mode.).15 F .186(The v)
+5.186 F .186(alue is)-.25 F -.15(ex)144 480 S .923(panded lik).15 F
+3.423(eak)-.1 G 1.223 -.15(ey b)-3.523 H .924
+(inding, so the standard set of meta- and control pre\214x).15 F .924
+(es and backslash es-)-.15 F .245(cape sequences is a)144 492 R -.25(va)
+-.2 G 2.745(ilable. Use).25 F .244(the \\1 and \\2 escapes to be)2.745 F
+.244(gin and end sequences of non-printing)-.15 F(characters, which can\
+ be used to embed a terminal control sequence into the mode string.)144
+504 Q F1(visible\255stats \(Off\))108 516 Q F0 .846(If set to)144 528 R
+F1(On)3.346 E F0 3.346(,ac)C .846(haracter denoting a \214le')-3.346 F
+3.346(st)-.55 G .846(ype as reported by)-3.346 F F2(stat)3.346 E F0 .846
+(\(2\) is appended to the \214lename)B
+(when listing possible completions.)144 540 Q F1
+(Readline Conditional Constructs)87 556.8 Q F0 .05
+(Readline implements a f)108 568.8 R .05(acility similar in spirit to t\
+he conditional compilation features of the C preprocessor)-.1 F .096
+(which allo)108 580.8 R .096(ws k)-.25 F .396 -.15(ey b)-.1 H .096
+(indings and v).15 F .096
+(ariable settings to be performed as the result of tests.)-.25 F .097
+(There are four parser)5.096 F(directi)108 592.8 Q -.15(ve)-.25 G 2.5
+(su).15 G(sed.)-2.5 E F1($if)108 609.6 Q F0(The)144 609.6 Q F1($if)2.963
+E F0 .463(construct allo)2.963 F .462(ws bindings to be made based on t\
+he editing mode, the terminal being used,)-.25 F
+(or the application using readline.)144 621.6 Q(The te)5 E
+(xt of the test, after an)-.15 E 2.5(yc)-.15 G(omparison operator)-2.5 E
+(,)-.4 E -.15(ex)146.5 633.6 S(tends to the end of the line; unless oth\
+erwise noted, no characters are required to isolate it.).15 E F1(mode)
+144 650.4 Q F0(The)180 650.4 Q F1(mode=)3.711 E F0 1.211(form of the)
+3.711 F F1($if)3.711 E F0(directi)3.711 E 1.511 -.15(ve i)-.25 H 3.711
+(su).15 G 1.211(sed to test whether readline is in emacs or vi)-3.711 F
+3.065(mode. This)180 662.4 R .565(may be used in conjunction with the)
+3.065 F F1 .565(set k)3.065 F(eymap)-.1 E F0 .565
+(command, for instance, to)3.065 F .735(set bindings in the)180 674.4 R
+F2(emacs\255standar)3.235 E(d)-.37 E F0(and)3.235 E F2(emacs\255ctlx)
+3.235 E F0 -.1(ke)3.235 G .735(ymaps only if readline is starting)-.05 F
+(out in emacs mode.)180 686.4 Q F1(term)144 703.2 Q F0(The)180 703.2 Q
+F1(term=)3.197 E F0 .696
+(form may be used to include terminal-speci\214c k)3.197 F .996 -.15
+(ey b)-.1 H .696(indings, perhaps to bind).15 F .654(the k)180 715.2 R
+.954 -.15(ey s)-.1 H .654(equences output by the terminal').15 F 3.154
+(sf)-.55 G .654(unction k)-3.154 F -.15(ey)-.1 G 3.154(s. The).15 F -.1
+(wo)3.154 G .654(rd on the right side of).1 F(the)180 727.2 Q F1(=)3.232
+E F0 .732(is tested ag)3.232 F .732(ainst both the full name of the ter\
+minal and the portion of the terminal)-.05 F(GNU Bash 5.1)72 768 Q
+(2020 October 29)141.235 E(44)190.395 E 0 Cg EP
+%%Page: 45 45
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E
+(name before the \214rst)180 84 Q/F1 10/Times-Bold@0 SF<ad>2.5 E F0 5
+(.T)C(his allo)-5 E(ws)-.25 E/F2 10/Times-Italic@0 SF(sun)2.84 E F0
+(to match both)2.74 E F2(sun)2.84 E F0(and)2.74 E F2(sun\255cmd)2.84 E
+F0 2.5(,f).77 G(or instance.)-2.5 E F1 -.1(ve)144 100.8 S(rsion).1 E F0
+(The)180 112.8 Q F1 -.1(ve)3.108 G(rsion).1 E F0 .608
+(test may be used to perform comparisons ag)3.108 F .609
+(ainst speci\214c readline v)-.05 F(ersions.)-.15 E(The)180 124.8 Q F1
+-.1(ve)2.772 G(rsion).1 E F0 -.15(ex)2.772 G .272
+(pands to the current readline v).15 F 2.771(ersion. The)-.15 F .271
+(set of comparison operators in-)2.771 F(cludes)180 136.8 Q F1(=)3.063 E
+F0 3.063(,\()C(and)-3.063 E F1(==)3.063 E F0(\),)A F1(!=)3.063 E F0(,)A
+F1(<=)3.063 E F0(,)A F1(>=)3.063 E F0(,)A F1(<)3.063 E F0 3.063(,a)C(nd)
+-3.063 E F1(>)3.064 E F0 5.564(.T)C .564(he v)-5.564 F .564
+(ersion number supplied on the right side)-.15 F .318
+(of the operator consists of a major v)180 148.8 R .318(ersion number)
+-.15 F 2.818(,a)-.4 G 2.818(no)-2.818 G .318
+(ptional decimal point, and an op-)-2.818 F .1(tional minor v)180 160.8
+R .1(ersion \(e.g.,)-.15 F F1(7.1)2.6 E F0 .1(\). If the minor v)B .101
+(ersion is omitted, it is assumed to be)-.15 F F1(0)2.601 E F0 5.101(.T)
+C(he)-5.101 E .06(operator may be separated from the string)180 172.8 R
+F1 -.1(ve)2.56 G(rsion).1 E F0 .06(and from the v)2.56 F .06
+(ersion number ar)-.15 F(gument)-.18 E(by whitespace.)180 184.8 Q F1
+(application)144 201.6 Q F0(The)180 213.6 Q F1(application)3.003 E F0
+.503(construct is used to include application-speci\214c settings.)3.003
+F .503(Each program)5.503 F .114(using the readline library sets the)180
+225.6 R F2 .114(application name)2.614 F F0 2.614(,a)C .114
+(nd an initialization \214le can test for a)-2.614 F .5(particular v)180
+237.6 R 3(alue. This)-.25 F .501(could be used to bind k)3 F .801 -.15
+(ey s)-.1 H .501(equences to functions useful for a spe-).15 F .397
+(ci\214c program.)180 249.6 R -.15(Fo)5.397 G 2.896(ri).15 G .396
+(nstance, the follo)-2.896 F .396(wing command adds a k)-.25 F .696 -.15
+(ey s)-.1 H .396(equence that quotes the).15 F(current or pre)180 261.6
+Q(vious w)-.25 E(ord in)-.1 E F1(bash)2.5 E F0(:)A F1($if)180 285.6 Q F0
+(Bash)2.5 E 2.5(#Q)180 297.6 S(uote the current or pre)-2.5 E(vious w)
+-.25 E(ord)-.1 E("\\C\255xq": "\\eb\\"\\ef\\"")180 309.6 Q F1($endif)180
+321.6 Q F2(variable)144 338.4 Q F0(The)180 350.4 Q F2(variable)3.776 E
+F0 1.276(construct pro)3.776 F 1.276
+(vides simple equality tests for readline v)-.15 F 1.277(ariables and v)
+-.25 F(alues.)-.25 E .08(The permitted comparison operators are)180
+362.4 R F2(=)2.579 E F0(,)A F2(==)2.579 E F0 2.579(,a)C(nd)-2.579 E F2
+(!=)2.579 E F0 5.079(.T)C .079(he v)-5.079 F .079
+(ariable name must be sepa-)-.25 F .98(rated from the comparison operat\
+or by whitespace; the operator may be separated from)180 374.4 R .13
+(the v)180 386.4 R .13(alue on the right hand side by whitespace.)-.25 F
+.129(Both string and boolean v)5.129 F .129(ariables may be)-.25 F
+(tested. Boolean v)180 398.4 Q(ariables must be tested ag)-.25 E
+(ainst the v)-.05 E(alues)-.25 E F2(on)2.5 E F0(and)2.5 E F2(of)2.5 E(f)
+-.18 E F0(.)A F1($endif)108 415.2 Q F0(This command, as seen in the pre)
+144 415.2 Q(vious e)-.25 E(xample, terminates an)-.15 E F1($if)2.5 E F0
+(command.)2.5 E F1($else)108 432 Q F0(Commands in this branch of the)144
+432 Q F1($if)2.5 E F0(directi)2.5 E .3 -.15(ve a)-.25 H(re e).15 E -.15
+(xe)-.15 G(cuted if the test f).15 E(ails.)-.1 E F1($include)108 448.8 Q
+F0 .356(This directi)144 460.8 R .656 -.15(ve t)-.25 H(ak).15 E .356
+(es a single \214lename as an ar)-.1 F .357
+(gument and reads commands and bindings from that)-.18 F 2.5(\214le. F)
+144 472.8 R(or e)-.15 E(xample, the follo)-.15 E(wing directi)-.25 E .3
+-.15(ve w)-.25 H(ould read).05 E F2(/etc/inputr)2.5 E(c)-.37 E F0(:)A F1
+($include)144 496.8 Q F2(/etc/inputr)5.833 E(c)-.37 E F1(Sear)87 513.6 Q
+(ching)-.18 E F0 .835(Readline pro)108 525.6 R .835
+(vides commands for searching through the command history \(see)-.15 F
+/F3 9/Times-Bold@0 SF(HIST)3.334 E(OR)-.162 E(Y)-.315 E F0(belo)3.084 E
+.834(w\) for lines)-.25 F(containing a speci\214ed string.)108 537.6 Q
+(There are tw)5 E 2.5(os)-.1 G(earch modes:)-2.5 E F2(incr)2.51 E
+(emental)-.37 E F0(and)3.01 E F2(non-incr)2.86 E(emental)-.37 E F0(.).51
+E .697(Incremental searches be)108 554.4 R .697
+(gin before the user has \214nished typing the search string.)-.15 F
+.698(As each character of the)5.698 F .113
+(search string is typed, readline displays the ne)108 566.4 R .112
+(xt entry from the history matching the string typed so f)-.15 F(ar)-.1
+E 5.112(.A)-.55 G(n)-5.112 E .542
+(incremental search requires only as man)108 578.4 R 3.042(yc)-.15 G
+.542(haracters as needed to \214nd the desired history entry)-3.042 F
+5.542(.T)-.65 G .542(he char)-5.542 F(-)-.2 E .224
+(acters present in the v)108 590.4 R .224(alue of the)-.25 F F1(isear)
+2.724 E(ch-terminators)-.18 E F0 -.25(va)2.724 G .224
+(riable are used to terminate an incremental search.).25 F .66
+(If that v)108 602.4 R .66(ariable has not been assigned a v)-.25 F .66
+(alue the Escape and Control-J characters will terminate an incre-)-.25
+F .097(mental search.)108 614.4 R .096(Control-G will abort an incremen\
+tal search and restore the original line.)5.097 F .096
+(When the search is)5.096 F(terminated, the history entry containing th\
+e search string becomes the current line.)108 626.4 Q 2.938 -.8(To \214)
+108 643.2 T 1.339(nd other matching entries in the history list, type C\
+ontrol-S or Control-R as appropriate.).8 F 1.339(This will)6.339 F .675
+(search backw)108 655.2 R .675(ard or forw)-.1 F .675
+(ard in the history for the ne)-.1 F .674
+(xt entry matching the search string typed so f)-.15 F(ar)-.1 E 5.674
+(.A)-.55 G -.15(ny)-5.674 G .174(other k)108 667.2 R .474 -.15(ey s)-.1
+H .174
+(equence bound to a readline command will terminate the search and e).15
+F -.15(xe)-.15 G .175(cute that command.).15 F -.15(Fo)5.175 G(r).15 E
+.541(instance, a)108 679.2 R F2(ne)3.041 E(wline)-.15 E F0 .541
+(will terminate the search and accept the line, thereby e)3.041 F -.15
+(xe)-.15 G .54(cuting the command from the).15 F(history list.)108 691.2
+Q .653(Readline remembers the last incremental search string.)108 708 R
+.653(If tw)5.653 F 3.153(oC)-.1 G .653(ontrol-Rs are typed without an)
+-3.153 F 3.153(yi)-.15 G(nterv)-3.153 E(en-)-.15 E
+(ing characters de\214ning a ne)108 720 Q 2.5(ws)-.25 G
+(earch string, an)-2.5 E 2.5(yr)-.15 G(emembered search string is used.)
+-2.5 E(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(45)190.395 E 0 Cg
+EP
+%%Page: 46 46
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E .567(Non-incremen\
+tal searches read the entire search string before starting to search fo\
+r matching history lines.)108 84 R(The search string may be typed by th\
+e user or be part of the contents of the current line.)108 96 Q/F1 10
+/Times-Bold@0 SF(Readline Command Names)87 112.8 Q F0 1.391(The follo)
+108 124.8 R 1.391
+(wing is a list of the names of the commands and the def)-.25 F 1.391
+(ault k)-.1 F 1.691 -.15(ey s)-.1 H 1.391(equences to which the).15 F
+3.892(ya)-.15 G(re)-3.892 E 2.622(bound. Command)108 136.8 R .122
+(names without an accompan)2.622 F .122(ying k)-.15 F .421 -.15(ey s)-.1
+H .121(equence are unbound by def).15 F 2.621(ault. In)-.1 F .121
+(the follo)2.621 F(wing)-.25 E(descriptions,)108 148.8 Q/F2 10
+/Times-Italic@0 SF(point)3.41 E F0 .91
+(refers to the current cursor position, and)3.41 F F2(mark)3.411 E F0
+.911(refers to a cursor position sa)3.411 F -.15(ve)-.2 G 3.411(db).15 G
+3.411(yt)-3.411 G(he)-3.411 E F1(set\255mark)108 160.8 Q F0 2.5
+(command. The)2.5 F(te)2.5 E
+(xt between the point and mark is referred to as the)-.15 E F2 -.37(re)
+2.5 G(gion)-.03 E F0(.)A F1(Commands f)87 177.6 Q(or Mo)-.25 E(ving)-.1
+E(beginning\255of\255line \(C\255a\))108 189.6 Q F0(Mo)144 201.6 Q .3
+-.15(ve t)-.15 H 2.5(ot).15 G(he start of the current line.)-2.5 E F1
+(end\255of\255line \(C\255e\))108 213.6 Q F0(Mo)144 225.6 Q .3 -.15
+(ve t)-.15 H 2.5(ot).15 G(he end of the line.)-2.5 E F1 -.25(fo)108
+237.6 S(rward\255char \(C\255f\)).25 E F0(Mo)144 249.6 Q .3 -.15(ve f)
+-.15 H(orw).15 E(ard a character)-.1 E(.)-.55 E F1
+(backward\255char \(C\255b\))108 261.6 Q F0(Mo)144 273.6 Q .3 -.15(ve b)
+-.15 H(ack a character).15 E(.)-.55 E F1 -.25(fo)108 285.6 S(rward\255w)
+.25 E(ord \(M\255f\))-.1 E F0(Mo)144 297.6 Q .823 -.15(ve f)-.15 H(orw)
+.15 E .523(ard to the end of the ne)-.1 F .523(xt w)-.15 F 3.023(ord. W)
+-.1 F .522(ords are composed of alphanumeric characters \(let-)-.8 F
+(ters and digits\).)144 309.6 Q F1(backward\255w)108 321.6 Q
+(ord \(M\255b\))-.1 E F0(Mo)144 333.6 Q 1.71 -.15(ve b)-.15 H 1.41
+(ack to the start of the current or pre).15 F 1.41(vious w)-.25 F 3.91
+(ord. W)-.1 F 1.41(ords are composed of alphanumeric)-.8 F
+(characters \(letters and digits\).)144 345.6 Q F1(shell\255f)108 357.6
+Q(orward\255w)-.25 E(ord)-.1 E F0(Mo)144 369.6 Q .784 -.15(ve f)-.15 H
+(orw).15 E .484(ard to the end of the ne)-.1 F .484(xt w)-.15 F 2.984
+(ord. W)-.1 F .484(ords are delimited by non-quoted shell metacharac-)
+-.8 F(ters.)144 381.6 Q F1(shell\255backward\255w)108 393.6 Q(ord)-.1 E
+F0(Mo)144 405.6 Q .908 -.15(ve b)-.15 H .609
+(ack to the start of the current or pre).15 F .609(vious w)-.25 F 3.109
+(ord. W)-.1 F .609(ords are delimited by non-quoted shell)-.8 F
+(metacharacters.)144 417.6 Q F1(pr)108 429.6 Q -.15(ev)-.18 G
+(ious\255scr).15 E(een\255line)-.18 E F0 .891(Attempt to mo)144 441.6 R
+1.191 -.15(ve p)-.15 H .891(oint to the same ph).15 F .891
+(ysical screen column on the pre)-.05 F .89(vious ph)-.25 F .89
+(ysical screen line.)-.05 F .87(This will not ha)144 453.6 R 1.17 -.15
+(ve t)-.2 H .87(he desired ef).15 F .87
+(fect if the current Readline line does not tak)-.25 F 3.37(eu)-.1 G
+3.37(pm)-3.37 G .87(ore than one)-3.37 F(ph)144 465.6 Q(ysical line or \
+if point is not greater than the length of the prompt plus the screen w\
+idth.)-.05 E F1(next\255scr)108 477.6 Q(een\255line)-.18 E F0 .638
+(Attempt to mo)144 489.6 R .938 -.15(ve p)-.15 H .638
+(oint to the same ph).15 F .637(ysical screen column on the ne)-.05 F
+.637(xt ph)-.15 F .637(ysical screen line. This)-.05 F .008(will not ha)
+144 501.6 R .309 -.15(ve t)-.2 H .009(he desired ef).15 F .009
+(fect if the current Readline line does not tak)-.25 F 2.509(eu)-.1 G
+2.509(pm)-2.509 G .009(ore than one ph)-2.509 F(ysical)-.05 E .772(line\
+ or if the length of the current Readline line is not greater than the \
+length of the prompt plus)144 513.6 R(the screen width.)144 525.6 Q F1
+(clear\255display \(M\255C\255l\))108 537.6 Q F0 1.498
+(Clear the screen and, if possible, the terminal')144 549.6 R 3.999(ss)
+-.55 G 1.499(crollback b)-3.999 F(uf)-.2 E(fer)-.25 E 3.999(,t)-.4 G
+1.499(hen redra)-3.999 F 3.999(wt)-.15 G 1.499(he current line,)-3.999 F
+(lea)144 561.6 Q(ving the current line at the top of the screen.)-.2 E
+F1(clear\255scr)108 573.6 Q(een \(C\255l\))-.18 E F0 1.36
+(Clear the screen, then redra)144 585.6 R 3.86(wt)-.15 G 1.36
+(he current line, lea)-3.86 F 1.36
+(ving the current line at the top of the screen.)-.2 F -.4(Wi)144 597.6
+S(th an ar).4 E
+(gument, refresh the current line without clearing the screen.)-.18 E F1
+-.18(re)108 609.6 S(draw\255curr).18 E(ent\255line)-.18 E F0
+(Refresh the current line.)144 621.6 Q F1(Commands f)87 638.4 Q
+(or Manipulating the History)-.25 E(accept\255line \(Newline, Retur)108
+650.4 Q(n\))-.15 E F0 .158(Accept the line re)144 662.4 R -.05(ga)-.15 G
+.158(rdless of where the cursor is.).05 F .158
+(If this line is non-empty)5.158 F 2.659(,a)-.65 G .159
+(dd it to the history list)-2.659 F .699(according to the state of the)
+144 674.4 R/F3 9/Times-Bold@0 SF(HISTCONTR)3.199 E(OL)-.27 E F0 -.25(va)
+2.949 G 3.199(riable. If).25 F .699
+(the line is a modi\214ed history line, then)3.199 F
+(restore the history line to its original state.)144 686.4 Q F1(pr)108
+698.4 Q -.15(ev)-.18 G(ious\255history \(C\255p\)).15 E F0
+(Fetch the pre)144 710.4 Q(vious command from the history list, mo)-.25
+E(ving back in the list.)-.15 E(GNU Bash 5.1)72 768 Q(2020 October 29)
+141.235 E(46)190.395 E 0 Cg EP
+%%Page: 47 47
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(next\255history \(C\255n\))108 84 Q F0(Fetch the ne)144 96 Q
+(xt command from the history list, mo)-.15 E(ving forw)-.15 E
+(ard in the list.)-.1 E F1(beginning\255of\255history \(M\255<\))108 108
+Q F0(Mo)144 120 Q .3 -.15(ve t)-.15 H 2.5(ot).15 G
+(he \214rst line in the history)-2.5 E(.)-.65 E F1
+(end\255of\255history \(M\255>\))108 132 Q F0(Mo)144 144 Q .3 -.15(ve t)
+-.15 H 2.5(ot).15 G(he end of the input history)-2.5 E 2.5(,i)-.65 G
+(.e., the line currently being entered.)-2.5 E F1 -2.29 -.18(re v)108
+156 T(erse\255sear).08 E(ch\255history \(C\255r\))-.18 E F0 1.47
+(Search backw)144 168 R 1.471(ard starting at the current line and mo)
+-.1 F 1.471(ving `up' through the history as necessary)-.15 F(.)-.65 E
+(This is an incremental search.)144 180 Q F1 -.25(fo)108 192 S
+(rward\255sear).25 E(ch\255history \(C\255s\))-.18 E F0 1.132
+(Search forw)144 204 R 1.132(ard starting at the current line and mo)-.1
+F 1.131(ving `do)-.15 F 1.131(wn' through the history as necessary)-.25
+F(.)-.65 E(This is an incremental search.)144 216 Q F1(non\255incr)108
+228 Q(emental\255r)-.18 E -2.3 -.15(ev e)-.18 H(rse\255sear).15 E
+(ch\255history \(M\255p\))-.18 E F0 .164(Search backw)144 240 R .164(ar\
+d through the history starting at the current line using a non-incremen\
+tal search for)-.1 F 2.5(as)144 252 S(tring supplied by the user)-2.5 E
+(.)-.55 E F1(non\255incr)108 264 Q(emental\255f)-.18 E(orward\255sear)
+-.25 E(ch\255history \(M\255n\))-.18 E F0 1.354(Search forw)144 276 R
+1.354(ard through the history using a non-incremental search for a stri\
+ng supplied by the)-.1 F(user)144 288 Q(.)-.55 E F1(history\255sear)108
+300 Q(ch\255f)-.18 E(orward)-.25 E F0 .248(Search forw)144 312 R .249(a\
+rd through the history for the string of characters between the start o\
+f the current line)-.1 F(and the point.)144 324 Q
+(This is a non-incremental search.)5 E F1(history\255sear)108 336 Q
+(ch\255backward)-.18 E F0 .951(Search backw)144 348 R .951(ard through \
+the history for the string of characters between the start of the curre\
+nt)-.1 F(line and the point.)144 360 Q
+(This is a non-incremental search.)5 E F1(history\255substring\255sear)
+108 372 Q(ch\255backward)-.18 E F0 .95(Search backw)144 384 R .951(ard \
+through the history for the string of characters between the start of t\
+he current)-.1 F .007(line and the current cursor position \(the)144 396
+R/F2 10/Times-Italic@0 SF(point)2.507 E F0 2.507(\). The)B .007
+(search string may match an)2.507 F .006(ywhere in a history)-.15 F 2.5
+(line. This)144 408 R(is a non-incremental search.)2.5 E F1
+(history\255substring\255sear)108 420 Q(ch\255f)-.18 E(orward)-.25 E F0
+.248(Search forw)144 432 R .249(ard through the history for the string \
+of characters between the start of the current line)-.1 F .319
+(and the point.)144 444 R .319(The search string may match an)5.319 F
+.319(ywhere in a history line.)-.15 F .318(This is a non-incremental)
+5.318 F(search.)144 456 Q F1(yank\255nth\255ar)108 468 Q 2.5(g\()-.1 G
+<4dad43ad7929>-2.5 E F0 .622(Insert the \214rst ar)144 480 R .622
+(gument to the pre)-.18 F .622(vious command \(usually the second w)-.25
+F .622(ord on the pre)-.1 F .622(vious line\))-.25 F .773(at point.)144
+492 R -.4(Wi)5.773 G .773(th an ar).4 F(gument)-.18 E F2(n)3.633 E F0
+3.273(,i).24 G .773(nsert the)-3.273 F F2(n)3.273 E F0 .773(th w)B .773
+(ord from the pre)-.1 F .773(vious command \(the w)-.25 F .773
+(ords in the)-.1 F(pre)144 504 Q .291(vious command be)-.25 F .291
+(gin with w)-.15 F .291(ord 0\).)-.1 F 2.791(An)5.291 G -2.25 -.15(eg a)
+-2.791 H(ti).15 E .591 -.15(ve a)-.25 H -.18(rg).15 G .291
+(ument inserts the).18 F F2(n)2.791 E F0 .291(th w)B .292
+(ord from the end of)-.1 F .282(the pre)144 516 R .282(vious command.)
+-.25 F .282(Once the ar)5.282 F(gument)-.18 E F2(n)2.781 E F0 .281
+(is computed, the ar)2.781 F .281(gument is e)-.18 F .281
+(xtracted as if the "!)-.15 F F2(n)A F0(")A(history e)144 528 Q
+(xpansion had been speci\214ed.)-.15 E F1(yank\255last\255ar)108 540 Q
+2.5(g\()-.1 G -1.667(M\255. ,)-2.5 F -1.667(M\255_ \))2.5 F F0 1.307
+(Insert the last ar)144 552 R 1.307(gument to the pre)-.18 F 1.307
+(vious command \(the last w)-.25 F 1.308(ord of the pre)-.1 F 1.308
+(vious history entry\).)-.25 F -.4(Wi)144 564 S .204(th a numeric ar).4
+F .204(gument, beha)-.18 F .504 -.15(ve ex)-.2 H .204(actly lik).15 F(e)
+-.1 E F1(yank\255nth\255ar)2.704 E(g)-.1 E F0 5.203(.S)C(uccessi)-5.203
+E .503 -.15(ve c)-.25 H .203(alls to).15 F F1(yank\255last\255ar)2.703 E
+(g)-.1 E F0(mo)144 576 Q .806 -.15(ve b)-.15 H .507
+(ack through the history list, inserting the last w).15 F .507
+(ord \(or the w)-.1 F .507(ord speci\214ed by the ar)-.1 F(gument)-.18 E
+.416(to the \214rst call\) of each line in turn.)144 588 R(An)5.416 E
+2.916(yn)-.15 G .416(umeric ar)-2.916 F .416
+(gument supplied to these successi)-.18 F .715 -.15(ve c)-.25 H .415
+(alls de-).15 F 1.217(termines the direction to mo)144 600 R 1.518 -.15
+(ve t)-.15 H 1.218(hrough the history).15 F 6.218(.A)-.65 G(ne)-2.5 E
+-.05(ga)-.15 G(ti).05 E 1.518 -.15(ve a)-.25 H -.18(rg).15 G 1.218
+(ument switches the direction).18 F .494
+(through the history \(back or forw)144 612 R 2.994(ard\). The)-.1 F
+.494(history e)2.994 F .494(xpansion f)-.15 F .494
+(acilities are used to e)-.1 F .494(xtract the last)-.15 F -.1(wo)144
+624 S(rd, as if the "!$" history e).1 E(xpansion had been speci\214ed.)
+-.15 E F1(shell\255expand\255line \(M\255C\255e\))108 636 Q F0 .622
+(Expand the line as the shell does.)144 648 R .622
+(This performs alias and history e)5.622 F .623
+(xpansion as well as all of the)-.15 F(shell w)144 660 Q(ord e)-.1 E 2.5
+(xpansions. See)-.15 F/F3 9/Times-Bold@0 SF(HIST)2.5 E(OR)-.162 E 2.25
+(YE)-.315 G(XP)-2.25 E(ANSION)-.666 E F0(belo)2.25 E 2.5(wf)-.25 G
+(or a description of history e)-2.5 E(xpansion.)-.15 E F1
+(history\255expand\255line \(M\255^\))108 672 Q F0 .939
+(Perform history e)144 684 R .939(xpansion on the current line.)-.15 F
+(See)5.939 E F3(HIST)3.439 E(OR)-.162 E 3.189(YE)-.315 G(XP)-3.189 E
+(ANSION)-.666 E F0(belo)3.189 E 3.438(wf)-.25 G .938(or a descrip-)
+-3.438 F(tion of history e)144 696 Q(xpansion.)-.15 E(GNU Bash 5.1)72
+768 Q(2020 October 29)141.235 E(47)190.395 E 0 Cg EP
+%%Page: 48 48
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(magic\255space)108 84 Q F0 .437(Perform history e)144 96 R .437
+(xpansion on the current line and insert a space.)-.15 F(See)5.438 E/F2
+9/Times-Bold@0 SF(HIST)2.938 E(OR)-.162 E 2.688(YE)-.315 G(XP)-2.688 E
+(ANSION)-.666 E F0(be-)2.688 E(lo)144 108 Q 2.5(wf)-.25 G
+(or a description of history e)-2.5 E(xpansion.)-.15 E F1
+(alias\255expand\255line)108 120 Q F0 .395(Perform alias e)144 132 R
+.395(xpansion on the current line.)-.15 F(See)5.395 E F2(ALIASES)2.895 E
+F0(abo)2.645 E .694 -.15(ve f)-.15 H .394(or a description of alias e)
+.15 F(xpan-)-.15 E(sion.)144 144 Q F1
+(history\255and\255alias\255expand\255line)108 156 Q F0
+(Perform history and alias e)144 168 Q(xpansion on the current line.)
+-.15 E F1(insert\255last\255ar)108 180 Q(gument \(M\255.)-.1 E 2.5(,M)
+.833 G -1.667(\255_ \))-2.5 F F0 2.5(As)144 192 S(ynon)-2.5 E(ym for)
+-.15 E F1(yank\255last\255ar)2.5 E(g)-.1 E F0(.)A F1
+(operate\255and\255get\255next \(C\255o\))108 204 Q F0 .947
+(Accept the current line for e)144 216 R -.15(xe)-.15 G .948
+(cution and fetch the ne).15 F .948(xt line relati)-.15 F 1.248 -.15
+(ve t)-.25 H 3.448(ot).15 G .948(he current line from the)-3.448 F .73
+(history for editing.)144 228 R 3.23(An)5.73 G .73(umeric ar)-3.23 F
+.729
+(gument, if supplied, speci\214es the history entry to use instead of)
+-.18 F(the current line.)144 240 Q F1
+(edit\255and\255execute\255command \(C\255x C\255e\))108 252 Q F0(In)144
+264 Q -.2(vo)-.4 G .346 -.1(ke a).2 H 2.646(ne).1 G .146
+(ditor on the current command line, and e)-2.646 F -.15(xe)-.15 G .146
+(cute the result as shell commands.).15 F F1(Bash)5.147 E F0(at-)2.647 E
+(tempts to in)144 276 Q -.2(vo)-.4 G -.1(ke).2 G F2($VISU)2.6 E(AL)-.54
+E/F3 9/Times-Roman@0 SF(,)A F2($EDIT)2.25 E(OR)-.162 E F3(,)A F0(and)
+2.25 E/F4 10/Times-Italic@0 SF(emacs)2.5 E F0(as the editor)2.5 E 2.5
+(,i)-.4 G 2.5(nt)-2.5 G(hat order)-2.5 E(.)-.55 E F1(Commands f)87 292.8
+Q(or Changing T)-.25 E(ext)-.92 E F4(end\255of\255\214le)108 304.8 Q F1
+(\(usually C\255d\))2.5 E F0 .799
+(The character indicating end-of-\214le as set, for e)144 316.8 R .799
+(xample, by)-.15 F/F5 10/Courier@0 SF(stty)3.299 E F0 5.799(.I)C 3.298
+(ft)-5.799 G .798(his character is read when)-3.298 F .592
+(there are no characters on the line, and point is at the be)144 328.8 R
+.593(ginning of the line, Readline interprets it)-.15 F
+(as the end of input and returns)144 340.8 Q F2(EOF)2.5 E F3(.)A F1
+(delete\255char \(C\255d\))108 352.8 Q F0 .442
+(Delete the character at point.)144 364.8 R .442
+(If this function is bound to the same character as the tty)5.442 F F1
+(EOF)2.941 E F0(char)2.941 E(-)-.2 E(acter)144 376.8 Q 2.5(,a)-.4 G(s)
+-2.5 E F1(C\255d)2.5 E F0(commonly is, see abo)2.5 E .3 -.15(ve f)-.15 H
+(or the ef).15 E(fects.)-.25 E F1(backward\255delete\255char \(Rubout\))
+108 388.8 Q F0 .552(Delete the character behind the cursor)144 400.8 R
+5.553(.W)-.55 G .553(hen gi)-5.553 F -.15(ve)-.25 G 3.053(nan).15 G .553
+(umeric ar)-3.053 F .553(gument, sa)-.18 F .853 -.15(ve t)-.2 H .553
+(he deleted te).15 F .553(xt on)-.15 F(the kill ring.)144 412.8 Q F1
+-.25(fo)108 424.8 S(rward\255backward\255delete\255char).25 E F0 .474
+(Delete the character under the cursor)144 436.8 R 2.974(,u)-.4 G .474
+(nless the cursor is at the end of the line, in which case the)-2.974 F
+(character behind the cursor is deleted.)144 448.8 Q F1
+(quoted\255insert \(C\255q, C\255v\))108 460.8 Q F0 .778(Add the ne)144
+472.8 R .779(xt character typed to the line v)-.15 F 3.279
+(erbatim. This)-.15 F .779(is ho)3.279 F 3.279(wt)-.25 G 3.279(oi)-3.279
+G .779(nsert characters lik)-3.279 F(e)-.1 E F1(C\255q)3.279 E F0 3.279
+(,f)C(or)-3.279 E -.15(ex)144 484.8 S(ample.).15 E F1
+(tab\255insert \(C\255v T)108 496.8 Q(AB\))-.9 E F0
+(Insert a tab character)144 508.8 Q(.)-.55 E F1
+(self\255insert \(a, b, A, 1, !, ...\))108 520.8 Q F0
+(Insert the character typed.)144 532.8 Q F1
+(transpose\255chars \(C\255t\))108 544.8 Q F0 .322
+(Drag the character before point forw)144 556.8 R .321(ard o)-.1 F -.15
+(ve)-.15 G 2.821(rt).15 G .321(he character at point, mo)-2.821 F .321
+(ving point forw)-.15 F .321(ard as well.)-.1 F .372
+(If point is at the end of the line, then this transposes the tw)144
+568.8 R 2.872(oc)-.1 G .373(haracters before point.)-2.872 F(Ne)5.373 E
+-.05(ga)-.15 G(ti).05 E .673 -.15(ve a)-.25 H -.2(r-).15 G(guments ha)
+144 580.8 Q .3 -.15(ve n)-.2 H 2.5(oe).15 G -.25(ff)-2.5 G(ect.).25 E F1
+(transpose\255w)108 592.8 Q(ords \(M\255t\))-.1 E F0 .024(Drag the w)144
+604.8 R .024(ord before point past the w)-.1 F .023(ord after point, mo)
+-.1 F .023(ving point o)-.15 F -.15(ve)-.15 G 2.523(rt).15 G .023(hat w)
+-2.523 F .023(ord as well.)-.1 F .023(If point)5.023 F
+(is at the end of the line, this transposes the last tw)144 616.8 Q 2.5
+(ow)-.1 G(ords on the line.)-2.6 E F1(upcase\255w)108 628.8 Q
+(ord \(M\255u\))-.1 E F0 1.698(Uppercase the current \(or follo)144
+640.8 R 1.698(wing\) w)-.25 F 4.198(ord. W)-.1 F 1.698(ith a ne)-.4 F
+-.05(ga)-.15 G(ti).05 E 1.999 -.15(ve a)-.25 H -.18(rg).15 G 1.699
+(ument, uppercase the pre).18 F(vious)-.25 E -.1(wo)144 652.8 S(rd, b).1
+E(ut do not mo)-.2 E .3 -.15(ve p)-.15 H(oint.).15 E F1(do)108 664.8 Q
+(wncase\255w)-.1 E(ord \(M\255l\))-.1 E F0(Lo)144 676.8 Q 1.648
+(wercase the current \(or follo)-.25 F 1.648(wing\) w)-.25 F 4.148
+(ord. W)-.1 F 1.647(ith a ne)-.4 F -.05(ga)-.15 G(ti).05 E 1.947 -.15
+(ve a)-.25 H -.18(rg).15 G 1.647(ument, lo).18 F 1.647(wercase the pre)
+-.25 F(vious)-.25 E -.1(wo)144 688.8 S(rd, b).1 E(ut do not mo)-.2 E .3
+-.15(ve p)-.15 H(oint.).15 E F1(capitalize\255w)108 700.8 Q
+(ord \(M\255c\))-.1 E F0 1.974(Capitalize the current \(or follo)144
+712.8 R 1.974(wing\) w)-.25 F 4.474(ord. W)-.1 F 1.974(ith a ne)-.4 F
+-.05(ga)-.15 G(ti).05 E 2.274 -.15(ve a)-.25 H -.18(rg).15 G 1.975
+(ument, capitalize the pre).18 F(vious)-.25 E -.1(wo)144 724.8 S(rd, b)
+.1 E(ut do not mo)-.2 E .3 -.15(ve p)-.15 H(oint.).15 E(GNU Bash 5.1)72
+768 Q(2020 October 29)141.235 E(48)190.395 E 0 Cg EP
+%%Page: 49 49
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF -.1(ove)108 84 S(rwrite\255mode).1 E F0 -.8(To)144 96 S .438(ggle o)
+.8 F -.15(ve)-.15 G .438(rwrite mode.).15 F -.4(Wi)5.438 G .438(th an e)
+.4 F .438(xplicit positi)-.15 F .737 -.15(ve n)-.25 H .437(umeric ar).15
+F .437(gument, switches to o)-.18 F -.15(ve)-.15 G .437(rwrite mode.).15
+F -.4(Wi)144 108 S .78(th an e).4 F .781(xplicit non-positi)-.15 F 1.081
+-.15(ve n)-.25 H .781(umeric ar).15 F .781
+(gument, switches to insert mode.)-.18 F .781(This command af)5.781 F
+(fects)-.25 E(only)144 120 Q F1(emacs)4.395 E F0(mode;)4.395 E F1(vi)
+4.395 E F0 1.894(mode does o)4.395 F -.15(ve)-.15 G 1.894(rwrite dif).15
+F(ferently)-.25 E 6.894(.E)-.65 G 1.894(ach call to)-6.894 F/F2 10
+/Times-Italic@0 SF -.37(re)4.394 G(adline\(\)).37 E F0 1.894
+(starts in insert)4.394 F 3.968(mode. In)144 132 R -.15(ove)3.968 G
+1.468(rwrite mode, characters bound to).15 F F1(self\255insert)3.969 E
+F0 1.469(replace the te)3.969 F 1.469(xt at point rather than)-.15 F
+.958(pushing the te)144 144 R .958(xt to the right.)-.15 F .957
+(Characters bound to)5.958 F F1(backward\255delete\255char)3.457 E F0
+.957(replace the character)3.457 F(before point with a space.)144 156 Q
+(By def)5 E(ault, this command is unbound.)-.1 E F1(Killing and Y)87
+172.8 Q(anking)-.85 E(kill\255line \(C\255k\))108 184.8 Q F0
+(Kill the te)144 196.8 Q(xt from point to the end of the line.)-.15 E F1
+(backward\255kill\255line \(C\255x Rubout\))108 208.8 Q F0(Kill backw)
+144 220.8 Q(ard to the be)-.1 E(ginning of the line.)-.15 E F1
+(unix\255line\255discard \(C\255u\))108 232.8 Q F0(Kill backw)144 244.8
+Q(ard from point to the be)-.1 E(ginning of the line.)-.15 E
+(The killed te)5 E(xt is sa)-.15 E -.15(ve)-.2 G 2.5(do).15 G 2.5(nt)
+-2.5 G(he kill-ring.)-2.5 E F1(kill\255whole\255line)108 256.8 Q F0
+(Kill all characters on the current line, no matter where point is.)144
+268.8 Q F1(kill\255w)108 280.8 Q(ord \(M\255d\))-.1 E F0 .728
+(Kill from point to the end of the current w)144 292.8 R .729
+(ord, or if between w)-.1 F .729(ords, to the end of the ne)-.1 F .729
+(xt w)-.15 F(ord.)-.1 E -.8(Wo)144 304.8 S
+(rd boundaries are the same as those used by).8 E F1 -.25(fo)2.5 G
+(rward\255w).25 E(ord)-.1 E F0(.)A F1(backward\255kill\255w)108 316.8 Q
+(ord \(M\255Rubout\))-.1 E F0(Kill the w)144 328.8 Q(ord behind point.)
+-.1 E -.8(Wo)5 G(rd boundaries are the same as those used by).8 E F1
+(backward\255w)2.5 E(ord)-.1 E F0(.)A F1(shell\255kill\255w)108 340.8 Q
+(ord)-.1 E F0 .729(Kill from point to the end of the current w)144 352.8
+R .728(ord, or if between w)-.1 F .728(ords, to the end of the ne)-.1 F
+.728(xt w)-.15 F(ord.)-.1 E -.8(Wo)144 364.8 S
+(rd boundaries are the same as those used by).8 E F1(shell\255f)2.5 E
+(orward\255w)-.25 E(ord)-.1 E F0(.)A F1(shell\255backward\255kill\255w)
+108 376.8 Q(ord)-.1 E F0 3.025(Kill the w)144 388.8 R 3.025
+(ord behind point.)-.1 F -.8(Wo)8.025 G 3.025
+(rd boundaries are the same as those used by).8 F F1(shell\255back-)
+5.525 E(ward\255w)144 400.8 Q(ord)-.1 E F0(.)A F1(unix\255w)108 412.8 Q
+(ord\255rubout \(C\255w\))-.1 E F0 .365(Kill the w)144 424.8 R .365
+(ord behind point, using white space as a w)-.1 F .364(ord boundary)-.1
+F 5.364(.T)-.65 G .364(he killed te)-5.364 F .364(xt is sa)-.15 F -.15
+(ve)-.2 G 2.864(do).15 G 2.864(nt)-2.864 G(he)-2.864 E(kill-ring.)144
+436.8 Q F1(unix\255\214lename\255rubout)108 448.8 Q F0 .166(Kill the w)
+144 460.8 R .166
+(ord behind point, using white space and the slash character as the w)
+-.1 F .167(ord boundaries.)-.1 F(The)5.167 E(killed te)144 472.8 Q
+(xt is sa)-.15 E -.15(ve)-.2 G 2.5(do).15 G 2.5(nt)-2.5 G(he kill-ring.)
+-2.5 E F1(delete\255horizontal\255space \(M\255\\\))108 484.8 Q F0
+(Delete all spaces and tabs around point.)144 496.8 Q F1(kill\255r)108
+508.8 Q(egion)-.18 E F0(Kill the te)144 520.8 Q(xt in the current re)
+-.15 E(gion.)-.15 E F1(copy\255r)108 532.8 Q(egion\255as\255kill)-.18 E
+F0(Cop)144 544.8 Q 2.5(yt)-.1 G(he te)-2.5 E(xt in the re)-.15 E
+(gion to the kill b)-.15 E(uf)-.2 E(fer)-.25 E(.)-.55 E F1
+(copy\255backward\255w)108 556.8 Q(ord)-.1 E F0(Cop)144 568.8 Q 4.801
+(yt)-.1 G 2.301(he w)-4.801 F 2.301(ord before point to the kill b)-.1 F
+(uf)-.2 E(fer)-.25 E 7.301(.T)-.55 G 2.301(he w)-7.301 F 2.3
+(ord boundaries are the same as)-.1 F F1(back-)4.8 E(ward\255w)144 580.8
+Q(ord)-.1 E F0(.)A F1(copy\255f)108 592.8 Q(orward\255w)-.25 E(ord)-.1 E
+F0(Cop)144 604.8 Q 4.507(yt)-.1 G 2.007(he w)-4.507 F 2.007(ord follo)
+-.1 F 2.007(wing point to the kill b)-.25 F(uf)-.2 E(fer)-.25 E 7.008
+(.T)-.55 G 2.008(he w)-7.008 F 2.008(ord boundaries are the same as)-.1
+F F1 -.25(fo)4.508 G -.37(r-).25 G(ward\255w)144 616.8 Q(ord)-.1 E F0(.)
+A F1(yank \(C\255y\))108 628.8 Q F0 -1(Ya)144 640.8 S
+(nk the top of the kill ring into the b)1 E(uf)-.2 E(fer at point.)-.25
+E F1(yank\255pop \(M\255y\))108 652.8 Q F0
+(Rotate the kill ring, and yank the ne)144 664.8 Q 2.5(wt)-.25 G 2.5
+(op. Only)-2.5 F -.1(wo)2.5 G(rks follo).1 E(wing)-.25 E F1(yank)2.5 E
+F0(or)2.5 E F1(yank\255pop)2.5 E F0(.)A F1(Numeric Ar)87 681.6 Q
+(guments)-.1 E(digit\255ar)108 693.6 Q
+(gument \(M\2550, M\2551, ..., M\255\255\))-.1 E F0 .367
+(Add this digit to the ar)144 705.6 R .367
+(gument already accumulating, or start a ne)-.18 F 2.867(wa)-.25 G -.18
+(rg)-2.867 G 2.867(ument. M\255\255).18 F .366(starts a ne)2.867 F -.05
+(ga)-.15 G(-).05 E(ti)144 717.6 Q .3 -.15(ve a)-.25 H -.18(rg).15 G
+(ument.).18 E(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(49)190.395
+E 0 Cg EP
+%%Page: 50 50
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(uni)108 84 Q -.1(ve)-.1 G(rsal\255ar).1 E(gument)-.1 E F0 .778
+(This is another w)144 96 R .779(ay to specify an ar)-.1 F 3.279
+(gument. If)-.18 F .779(this command is follo)3.279 F .779
+(wed by one or more digits,)-.25 F 1.376
+(optionally with a leading minus sign, those digits de\214ne the ar)144
+108 R 3.876(gument. If)-.18 F 1.376(the command is fol-)3.876 F(lo)144
+120 Q 1.17(wed by digits, e)-.25 F -.15(xe)-.15 G(cuting).15 E F1(uni)
+3.67 E -.1(ve)-.1 G(rsal\255ar).1 E(gument)-.1 E F0(ag)3.67 E 1.17
+(ain ends the numeric ar)-.05 F 1.17(gument, b)-.18 F 1.17(ut is other)
+-.2 F(-)-.2 E .899(wise ignored.)144 132 R .898
+(As a special case, if this command is immediately follo)5.899 F .898
+(wed by a character that is)-.25 F 1.23
+(neither a digit nor minus sign, the ar)144 144 R 1.23
+(gument count for the ne)-.18 F 1.23(xt command is multiplied by four)
+-.15 F(.)-.55 E .823(The ar)144 156 R .823
+(gument count is initially one, so e)-.18 F -.15(xe)-.15 G .823
+(cuting this function the \214rst time mak).15 F .822(es the ar)-.1 F
+(gument)-.18 E(count four)144 168 Q 2.5(,as)-.4 G(econd time mak)-2.5 E
+(es the ar)-.1 E(gument count sixteen, and so on.)-.18 E F1(Completing)
+87 184.8 Q(complete \(T)108 196.8 Q(AB\))-.9 E F0 1.137
+(Attempt to perform completion on the te)144 208.8 R 1.137
+(xt before point.)-.15 F F1(Bash)6.137 E F0 1.137
+(attempts completion treating the)3.637 F(te)144 220.8 Q .533(xt as a v)
+-.15 F .533(ariable \(if the te)-.25 F .533(xt be)-.15 F .533(gins with)
+-.15 F F1($)3.033 E F0 .533(\), username \(if the te)B .532(xt be)-.15 F
+.532(gins with)-.15 F F1(~)3.032 E F0 .532(\), hostname \(if the)B(te)
+144 232.8 Q .701(xt be)-.15 F .701(gins with)-.15 F F1(@)3.201 E F0 .701
+(\), or command \(including aliases and functions\) in turn.)B .702
+(If none of these pro-)5.701 F
+(duces a match, \214lename completion is attempted.)144 244.8 Q F1
+(possible\255completions \(M\255?\))108 256.8 Q F0
+(List the possible completions of the te)144 268.8 Q(xt before point.)
+-.15 E F1(insert\255completions \(M\255*\))108 280.8 Q F0 .783
+(Insert all completions of the te)144 292.8 R .783
+(xt before point that w)-.15 F .783(ould ha)-.1 F 1.083 -.15(ve b)-.2 H
+.783(een generated by).15 F F1(possible\255com-)3.282 E(pletions)144
+304.8 Q F0(.)A F1(menu\255complete)108 316.8 Q F0 .928(Similar to)144
+328.8 R F1(complete)3.428 E F0 3.428(,b)C .929(ut replaces the w)-3.628
+F .929(ord to be completed with a single match from the list of)-.1 F
+1.194(possible completions.)144 340.8 R 1.194(Repeated e)6.194 F -.15
+(xe)-.15 G 1.194(cution of).15 F F1(menu\255complete)3.694 E F0 1.193
+(steps through the list of possible)3.694 F .828
+(completions, inserting each match in turn.)144 352.8 R .828
+(At the end of the list of completions, the bell is rung)5.828 F .727
+(\(subject to the setting of)144 364.8 R F1(bell\255style)3.227 E F0
+3.227(\)a)C .727(nd the original te)-3.227 F .727(xt is restored.)-.15 F
+.727(An ar)5.727 F .727(gument of)-.18 F/F2 10/Times-Italic@0 SF(n)3.227
+E F0(mo)3.227 E -.15(ve)-.15 G(s).15 E F2(n)3.227 E F0 1.73
+(positions forw)144 376.8 R 1.73(ard in the list of matches; a ne)-.1 F
+-.05(ga)-.15 G(ti).05 E 2.03 -.15(ve a)-.25 H -.18(rg).15 G 1.73
+(ument may be used to mo).18 F 2.03 -.15(ve b)-.15 H(ackw).15 E(ard)-.1
+E(through the list.)144 388.8 Q(This command is intended to be bound to)
+5 E F1 -.9(TA)2.5 G(B).9 E F0 2.5(,b)C(ut is unbound by def)-2.7 E
+(ault.)-.1 E F1(menu\255complete\255backward)108 400.8 Q F0 .82
+(Identical to)144 412.8 R F1(menu\255complete)3.32 E F0 3.32(,b)C .82
+(ut mo)-3.52 F -.15(ve)-.15 G 3.32(sb).15 G(ackw)-3.32 E .82
+(ard through the list of possible completions, as if)-.1 F F1
+(menu\255complete)144 424.8 Q F0(had been gi)2.5 E -.15(ve)-.25 G 2.5
+(nan).15 G -2.25 -.15(eg a)-2.5 H(ti).15 E .3 -.15(ve a)-.25 H -.18(rg)
+.15 G 2.5(ument. This).18 F(command is unbound by def)2.5 E(ault.)-.1 E
+F1(delete\255char\255or\255list)108 436.8 Q F0 .234
+(Deletes the character under the cursor if not at the be)144 448.8 R
+.234(ginning or end of the line \(lik)-.15 F(e)-.1 E F1(delete\255char)
+2.735 E F0(\).)A .425(If at the end of the line, beha)144 460.8 R -.15
+(ve)-.2 G 2.925(si).15 G .425(dentically to)-2.925 F F1
+(possible\255completions)2.925 E F0 5.425(.T)C .425
+(his command is unbound)-5.425 F(by def)144 472.8 Q(ault.)-.1 E F1
+(complete\255\214lename \(M\255/\))108 484.8 Q F0
+(Attempt \214lename completion on the te)144 496.8 Q(xt before point.)
+-.15 E F1(possible\255\214lename\255completions \(C\255x /\))108 508.8 Q
+F0(List the possible completions of the te)144 520.8 Q
+(xt before point, treating it as a \214lename.)-.15 E F1
+(complete\255user)108 532.8 Q(name \(M\255~\))-.15 E F0
+(Attempt completion on the te)144 544.8 Q
+(xt before point, treating it as a username.)-.15 E F1(possible\255user)
+108 556.8 Q(name\255completions \(C\255x ~\))-.15 E F0
+(List the possible completions of the te)144 568.8 Q
+(xt before point, treating it as a username.)-.15 E F1(complete\255v)108
+580.8 Q(ariable \(M\255$\))-.1 E F0(Attempt completion on the te)144
+592.8 Q(xt before point, treating it as a shell v)-.15 E(ariable.)-.25 E
+F1(possible\255v)108 604.8 Q(ariable\255completions \(C\255x $\))-.1 E
+F0(List the possible completions of the te)144 616.8 Q
+(xt before point, treating it as a shell v)-.15 E(ariable.)-.25 E F1
+(complete\255hostname \(M\255@\))108 628.8 Q F0
+(Attempt completion on the te)144 640.8 Q
+(xt before point, treating it as a hostname.)-.15 E F1
+(possible\255hostname\255completions \(C\255x @\))108 652.8 Q F0
+(List the possible completions of the te)144 664.8 Q
+(xt before point, treating it as a hostname.)-.15 E F1
+(complete\255command \(M\255!\))108 676.8 Q F0 .58
+(Attempt completion on the te)144 688.8 R .581
+(xt before point, treating it as a command name.)-.15 F .581
+(Command comple-)5.581 F .715(tion attempts to match the te)144 700.8 R
+.715(xt ag)-.15 F .715(ainst aliases, reserv)-.05 F .715(ed w)-.15 F
+.715(ords, shell functions, shell b)-.1 F .715(uiltins, and)-.2 F
+(\214nally e)144 712.8 Q -.15(xe)-.15 G
+(cutable \214lenames, in that order).15 E(.)-.55 E(GNU Bash 5.1)72 768 Q
+(2020 October 29)141.235 E(50)190.395 E 0 Cg EP
+%%Page: 51 51
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(possible\255command\255completions \(C\255x !\))108 84 Q F0
+(List the possible completions of the te)144 96 Q
+(xt before point, treating it as a command name.)-.15 E F1
+(dynamic\255complete\255history \(M\255T)108 108 Q(AB\))-.9 E F0 .424
+(Attempt completion on the te)144 120 R .425
+(xt before point, comparing the te)-.15 F .425(xt ag)-.15 F .425
+(ainst lines from the history list)-.05 F
+(for possible completion matches.)144 132 Q F1(dab)108 144 Q(br)-.1 E
+-.15(ev)-.18 G(\255expand).15 E F0 .611
+(Attempt menu completion on the te)144 156 R .611
+(xt before point, comparing the te)-.15 F .61(xt ag)-.15 F .61
+(ainst lines from the his-)-.05 F
+(tory list for possible completion matches.)144 168 Q F1
+(complete\255into\255braces \(M\255{\))108 180 Q F0 .4(Perform \214lena\
+me completion and insert the list of possible completions enclosed with\
+in braces so)144 192 R(the list is a)144 204 Q -.25(va)-.2 G
+(ilable to the shell \(see).25 E F1(Brace Expansion)2.5 E F0(abo)2.5 E
+-.15(ve)-.15 G(\).).15 E F1 -.25(Ke)87 220.8 S(yboard Macr).25 E(os)-.18
+E(start\255kbd\255macr)108 232.8 Q 2.5(o\()-.18 G(C\255x \()-2.5 E(\))
+.833 E F0(Be)144 244.8 Q(gin sa)-.15 E
+(ving the characters typed into the current k)-.2 E -.15(ey)-.1 G
+(board macro.).15 E F1(end\255kbd\255macr)108 256.8 Q 2.5(o\()-.18 G
+(C\255x \))-2.5 E(\)).833 E F0(Stop sa)144 268.8 Q
+(ving the characters typed into the current k)-.2 E -.15(ey)-.1 G
+(board macro and store the de\214nition.).15 E F1
+(call\255last\255kbd\255macr)108 280.8 Q 2.5(o\()-.18 G(C\255x e\))-2.5
+E F0(Re-e)144 292.8 Q -.15(xe)-.15 G 1(cute the last k).15 F -.15(ey)-.1
+G .999(board macro de\214ned, by making the characters in the macro app\
+ear as if).15 F(typed at the k)144 304.8 Q -.15(ey)-.1 G(board.).15 E F1
+(print\255last\255kbd\255macr)108 316.8 Q 2.5(o\()-.18 G(\))-2.5 E F0
+(Print the last k)144 328.8 Q -.15(ey)-.1 G
+(board macro de\214ned in a format suitable for the).15 E/F2 10
+/Times-Italic@0 SF(inputr)2.5 E(c)-.37 E F0(\214le.)2.5 E F1
+(Miscellaneous)87 345.6 Q -.18(re)108 357.6 S<ad72>.18 E
+(ead\255init\255\214le \(C\255x C\255r\))-.18 E F0 1.776
+(Read in the contents of the)144 369.6 R F2(inputr)4.276 E(c)-.37 E F0
+1.777(\214le, and incorporate an)4.276 F 4.277(yb)-.15 G 1.777
+(indings or v)-4.277 F 1.777(ariable assignments)-.25 F(found there.)144
+381.6 Q F1(abort \(C\255g\))108 393.6 Q F0 3.249
+(Abort the current editing command and ring the terminal')144 405.6 R
+5.748(sb)-.55 G 3.248(ell \(subject to the setting of)-5.748 F F1
+(bell\255style)144 417.6 Q F0(\).)A F1(do\255lo)108 429.6 Q(wer)-.1 E
+(case\255v)-.18 E(ersion \(M\255A, M\255B, M\255)-.1 E F2(x)A F1 2.5(,.)
+C(..\))-2.5 E F0 1.738(If the meta\214ed character)144 441.6 R F2(x)
+4.238 E F0 1.739
+(is uppercase, run the command that is bound to the corresponding)4.238
+F(meta\214ed lo)144 453.6 Q(wercase character)-.25 E 5(.T)-.55 G
+(he beha)-5 E(vior is unde\214ned if)-.2 E F2(x)2.5 E F0(is already lo)
+2.5 E(wercase.)-.25 E F1(pr)108 465.6 Q(e\214x\255meta \(ESC\))-.18 E F0
+(Metafy the ne)144 477.6 Q(xt character typed.)-.15 E/F3 9/Times-Bold@0
+SF(ESC)5 E F1(f)2.25 E F0(is equi)2.5 E -.25(va)-.25 G(lent to).25 E F1
+(Meta\255f)2.5 E F0(.)A F1(undo \(C\255_, C\255x C\255u\))108 489.6 Q F0
+(Incremental undo, separately remembered for each line.)144 501.6 Q F1
+-2.29 -.18(re v)108 513.6 T(ert\255line \(M\255r\)).08 E F0 .231
+(Undo all changes made to this line.)144 525.6 R .231(This is lik)5.231
+F 2.731(ee)-.1 G -.15(xe)-2.881 G .23(cuting the).15 F F1(undo)2.73 E F0
+.23(command enough times to re-)2.73 F
+(turn the line to its initial state.)144 537.6 Q F1
+(tilde\255expand \(M\255&\))108 549.6 Q F0(Perform tilde e)144 561.6 Q
+(xpansion on the current w)-.15 E(ord.)-.1 E F1
+(set\255mark \(C\255@, M\255<space>\))108 573.6 Q F0
+(Set the mark to the point.)144 585.6 Q(If a numeric ar)5 E
+(gument is supplied, the mark is set to that position.)-.18 E F1
+(exchange\255point\255and\255mark \(C\255x C\255x\))108 597.6 Q F0(Sw)
+144 609.6 Q .282(ap the point with the mark.)-.1 F .283
+(The current cursor position is set to the sa)5.283 F -.15(ve)-.2 G
+2.783(dp).15 G .283(osition, and the old)-2.783 F(cursor position is sa)
+144 621.6 Q -.15(ve)-.2 G 2.5(da).15 G 2.5(st)-2.5 G(he mark.)-2.5 E F1
+(character\255sear)108 633.6 Q(ch \(C\255]\))-.18 E F0 3.036(Ac)144
+645.6 S .536(haracter is read and point is mo)-3.036 F -.15(ve)-.15 G
+3.035(dt).15 G 3.035(ot)-3.035 G .535(he ne)-3.035 F .535
+(xt occurrence of that character)-.15 F 5.535(.A)-.55 G(ne)-2.5 E -.05
+(ga)-.15 G(ti).05 E .835 -.15(ve c)-.25 H(ount).15 E(searches for pre)
+144 657.6 Q(vious occurrences.)-.25 E F1(character\255sear)108 669.6 Q
+(ch\255backward \(M\255C\255]\))-.18 E F0 3.543(Ac)144 681.6 S 1.043
+(haracter is read and point is mo)-3.543 F -.15(ve)-.15 G 3.544(dt).15 G
+3.544(ot)-3.544 G 1.044(he pre)-3.544 F 1.044
+(vious occurrence of that character)-.25 F 6.044(.A)-.55 G(ne)-2.5 E
+-.05(ga)-.15 G(ti).05 E -.15(ve)-.25 G
+(count searches for subsequent occurrences.)144 693.6 Q F1
+(skip\255csi\255sequence)108 705.6 Q F0 1.827
+(Read enough characters to consume a multi-k)144 717.6 R 2.126 -.15
+(ey s)-.1 H 1.826(equence such as those de\214ned for k).15 F -.15(ey)
+-.1 G 4.326(sl).15 G(ik)-4.326 E(e)-.1 E .79(Home and End.)144 729.6 R
+.791(Such sequences be)5.79 F .791
+(gin with a Control Sequence Indicator \(CSI\), usually ESC\255[.)-.15 F
+(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(51)190.395 E 0 Cg EP
+%%Page: 52 52
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E .332
+(If this sequence is bound to "\\[", k)144 84 R -.15(ey)-.1 G 2.831(sp)
+.15 G .331(roducing such sequences will ha)-2.831 F .631 -.15(ve n)-.2 H
+2.831(oe).15 G -.25(ff)-2.831 G .331(ect unless e).25 F(xplic-)-.15 E
+.026(itly bound to a readline command, instead of inserting stray chara\
+cters into the editing b)144 96 R(uf)-.2 E(fer)-.25 E 5.026(.T)-.55 G
+(his)-5.026 E(is unbound by def)144 108 Q(ault, b)-.1 E
+(ut usually bound to ESC\255[.)-.2 E/F1 10/Times-Bold@0 SF
+(insert\255comment \(M\255#\))108 120 Q F0 -.4(Wi)144 132 S .481
+(thout a numeric ar).4 F .481(gument, the v)-.18 F .481
+(alue of the readline)-.25 F F1(comment\255begin)2.981 E F0 -.25(va)
+2.981 G .48(riable is inserted at the).25 F(be)144 144 Q .244
+(ginning of the current line.)-.15 F .245(If a numeric ar)5.244 F .245
+(gument is supplied, this command acts as a toggle: if)-.18 F .322
+(the characters at the be)144 156 R .321
+(ginning of the line do not match the v)-.15 F .321(alue of)-.25 F F1
+(comment\255begin)2.821 E F0 2.821(,t)C .321(he v)-2.821 F .321(alue is)
+-.25 F .831(inserted, otherwise the characters in)144 168 R F1
+(comment\255begin)3.331 E F0 .832(are deleted from the be)3.331 F .832
+(ginning of the line.)-.15 F 1.469
+(In either case, the line is accepted as if a ne)144 180 R 1.468
+(wline had been typed.)-.25 F 1.468(The def)6.468 F 1.468(ault v)-.1 F
+1.468(alue of)-.25 F F1(com-)3.968 E(ment\255begin)144 192 Q F0 .839
+(causes this command to mak)3.339 F 3.339(et)-.1 G .839
+(he current line a shell comment.)-3.339 F .84(If a numeric ar)5.84 F
+(gu-)-.18 E(ment causes the comment character to be remo)144 204 Q -.15
+(ve)-.15 G(d, the line will be e).15 E -.15(xe)-.15 G
+(cuted by the shell.).15 E F1(glob\255complete\255w)108 216 Q
+(ord \(M\255g\))-.1 E F0 .792(The w)144 228 R .791
+(ord before point is treated as a pattern for pathname e)-.1 F .791
+(xpansion, with an asterisk implicitly)-.15 F 2.5(appended. This)144 240
+R(pattern is used to generate a list of matching \214lenames for possib\
+le completions.)2.5 E F1(glob\255expand\255w)108 252 Q(ord \(C\255x *\))
+-.1 E F0 .175(The w)144 264 R .176
+(ord before point is treated as a pattern for pathname e)-.1 F .176
+(xpansion, and the list of matching \214le-)-.15 F .516
+(names is inserted, replacing the w)144 276 R 3.016(ord. If)-.1 F 3.016
+(an)3.016 G .516(umeric ar)-3.016 F .516
+(gument is supplied, an asterisk is appended)-.18 F(before pathname e)
+144 288 Q(xpansion.)-.15 E F1(glob\255list\255expansions \(C\255x g\))
+108 300 Q F0 .923(The list of e)144 312 R .923(xpansions that w)-.15 F
+.923(ould ha)-.1 F 1.223 -.15(ve b)-.2 H .923(een generated by).15 F F1
+(glob\255expand\255w)3.423 E(ord)-.1 E F0 .923(is displayed, and)3.423 F
+.872(the line is redra)144 324 R 3.372(wn. If)-.15 F 3.372(an)3.372 G
+.872(umeric ar)-3.372 F .872
+(gument is supplied, an asterisk is appended before pathname)-.18 F -.15
+(ex)144 336 S(pansion.).15 E F1(dump\255functions)108 348 Q F0 .626
+(Print all of the functions and their k)144 360 R .926 -.15(ey b)-.1 H
+.627(indings to the readline output stream.).15 F .627(If a numeric ar)
+5.627 F(gu-)-.18 E
+(ment is supplied, the output is formatted in such a w)144 372 Q
+(ay that it can be made part of an)-.1 E/F2 10/Times-Italic@0 SF(inputr)
+2.5 E(c)-.37 E F0(\214le.)2.5 E F1(dump\255v)108 384 Q(ariables)-.1 E F0
+.763(Print all of the settable readline v)144 396 R .762
+(ariables and their v)-.25 F .762(alues to the readline output stream.)
+-.25 F .762(If a nu-)5.762 F .108(meric ar)144 408 R .108
+(gument is supplied, the output is formatted in such a w)-.18 F .109
+(ay that it can be made part of an)-.1 F F2(in-)2.609 E(putr)144 420 Q
+(c)-.37 E F0(\214le.)2.5 E F1(dump\255macr)108 432 Q(os)-.18 E F0 .593
+(Print all of the readline k)144 444 R .893 -.15(ey s)-.1 H .592
+(equences bound to macros and the strings the).15 F 3.092(yo)-.15 G
+3.092(utput. If)-3.092 F 3.092(an)3.092 G(umeric)-3.092 E(ar)144 456 Q
+.528(gument is supplied, the output is formatted in such a w)-.18 F .528
+(ay that it can be made part of an)-.1 F F2(inputr)3.028 E(c)-.37 E F0
+(\214le.)144 468 Q F1(display\255shell\255v)108 480 Q
+(ersion \(C\255x C\255v\))-.1 E F0(Display v)144 492 Q
+(ersion information about the current instance of)-.15 E F1(bash)2.5 E
+F0(.)A F1(Pr)87 508.8 Q(ogrammable Completion)-.18 E F0 .147(When w)108
+520.8 R .147(ord completion is attempted for an ar)-.1 F .147
+(gument to a command for which a completion speci\214cation \(a)-.18 F
+F2(compspec)108 532.8 Q F0 3.828(\)h)C 1.329
+(as been de\214ned using the)-3.828 F F1(complete)3.829 E F0 -.2(bu)
+3.829 G 1.329(iltin \(see).2 F/F3 9/Times-Bold@0 SF 1.329(SHELL B)3.829
+F(UIL)-.09 E 1.329(TIN COMMANDS)-.828 F F0(belo)3.579 E 1.329(w\), the)
+-.25 F(programmable completion f)108 544.8 Q(acilities are in)-.1 E -.2
+(vo)-.4 G -.1(ke).2 G(d.).1 E .498
+(First, the command name is identi\214ed.)108 561.6 R .498
+(If the command w)5.498 F .497
+(ord is the empty string \(completion attempted at)-.1 F .233(the be)108
+573.6 R .233(ginning of an empty line\), an)-.15 F 2.733(yc)-.15 G .233
+(ompspec de\214ned with the)-2.733 F F1<ad45>2.733 E F0 .233(option to)
+2.733 F F1(complete)2.733 E F0 .233(is used.)2.733 F .234(If a comp-)
+5.234 F .481(spec has been de\214ned for that command, the compspec is \
+used to generate the list of possible completions)108 585.6 R .822
+(for the w)108 597.6 R 3.322(ord. If)-.1 F .822(the command w)3.322 F
+.823(ord is a full pathname, a compspec for the full pathname is search\
+ed for)-.1 F 2.867(\214rst. If)108 609.6 R .366(no compspec is found fo\
+r the full pathname, an attempt is made to \214nd a compspec for the po\
+rtion)2.867 F(follo)108 621.6 Q .298(wing the \214nal slash.)-.25 F .298
+(If those searches do not result in a compspec, an)5.298 F 2.799(yc)-.15
+G .299(ompspec de\214ned with the)-2.799 F F1<ad44>2.799 E F0 .057
+(option to)108 633.6 R F1(complete)2.557 E F0 .056(is used as the def)
+2.556 F 2.556(ault. If)-.1 F .056(there is no def)2.556 F .056
+(ault compspec,)-.1 F F1(bash)2.556 E F0 .056(attempts alias e)2.556 F
+.056(xpansion on)-.15 F .332(the command w)108 645.6 R .332(ord as a \
+\214nal resort, and attempts to \214nd a compspec for the command w)-.1
+F .332(ord from an)-.1 F 2.833(ys)-.15 G(uc-)-2.833 E(cessful e)108
+657.6 Q(xpansion.)-.15 E .817(Once a compspec has been found, it is use\
+d to generate the list of matching w)108 674.4 R 3.317(ords. If)-.1 F
+3.317(ac)3.317 G .817(ompspec is not)-3.317 F(found, the def)108 686.4 Q
+(ault)-.1 E F1(bash)2.5 E F0(completion as described abo)2.5 E .3 -.15
+(ve u)-.15 H(nder).15 E F1(Completing)2.5 E F0(is performed.)2.5 E .463
+(First, the actions speci\214ed by the compspec are used.)108 703.2 R
+.464(Only matches which are pre\214x)5.464 F .464(ed by the w)-.15 F
+.464(ord being)-.1 F .596(completed are returned.)108 715.2 R .596
+(When the)5.596 F F1<ad66>3.096 E F0(or)3.095 E F1<ad64>3.095 E F0 .595
+(option is used for \214lename or directory name completion, the)3.095 F
+(shell v)108 727.2 Q(ariable)-.25 E F3(FIGNORE)2.5 E F0
+(is used to \214lter the matches.)2.25 E(GNU Bash 5.1)72 768 Q
+(2020 October 29)141.235 E(52)190.395 E 0 Cg EP
+%%Page: 53 53
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E(An)108 84 Q 4.084
+(yc)-.15 G 1.584(ompletions speci\214ed by a pathname e)-4.084 F 1.584
+(xpansion pattern to the)-.15 F/F1 10/Times-Bold@0 SF<ad47>4.084 E F0
+1.584(option are generated ne)4.084 F 4.084(xt. The)-.15 F -.1(wo)108 96
+S .555(rds generated by the pattern need not match the w).1 F .554
+(ord being completed.)-.1 F(The)5.554 E/F2 9/Times-Bold@0 SF(GLOBIGNORE)
+3.054 E F0 .554(shell v)2.804 F(ari-)-.25 E
+(able is not used to \214lter the matches, b)108 108 Q(ut the)-.2 E F2
+(FIGNORE)2.5 E F0 -.25(va)2.25 G(riable is used.).25 E(Ne)108 124.8 Q
+.32(xt, the string speci\214ed as the ar)-.15 F .32(gument to the)-.18 F
+F1<ad57>2.82 E F0 .321(option is considered.)2.821 F .321
+(The string is \214rst split using the)5.321 F .413(characters in the)
+108 136.8 R F2(IFS)2.913 E F0 .412(special v)2.663 F .412
+(ariable as delimiters.)-.25 F .412(Shell quoting is honored.)5.412 F
+.412(Each w)5.412 F .412(ord is then e)-.1 F(xpanded)-.15 E .091
+(using brace e)108 148.8 R .091(xpansion, tilde e)-.15 F .092
+(xpansion, parameter and v)-.15 F .092(ariable e)-.25 F .092
+(xpansion, command substitution, and arith-)-.15 F 1.397(metic e)108
+160.8 R 1.396(xpansion, as described abo)-.15 F 1.696 -.15(ve u)-.15 H
+(nder).15 E F2(EXP)3.896 E(ANSION)-.666 E/F3 9/Times-Roman@0 SF(.)A F0
+1.396(The results are split using the rules described)5.896 F(abo)108
+172.8 Q .509 -.15(ve u)-.15 H(nder).15 E F1 -.75(Wo)2.709 G .209
+(rd Splitting).75 F F0 5.209(.T)C .209(he results of the e)-5.209 F .209
+(xpansion are pre\214x-matched ag)-.15 F .21(ainst the w)-.05 F .21
+(ord being com-)-.1 F(pleted, and the matching w)108 184.8 Q
+(ords become the possible completions.)-.1 E .234
+(After these matches ha)108 201.6 R .534 -.15(ve b)-.2 H .234
+(een generated, an).15 F 2.734(ys)-.15 G .233
+(hell function or command speci\214ed with the)-2.734 F F1<ad46>2.733 E
+F0(and)2.733 E F1<ad43>2.733 E F0(op-)2.733 E 4.208(tions is in)108
+213.6 R -.2(vo)-.4 G -.1(ke).2 G 6.708(d. When).1 F 4.209
+(the command or function is in)6.708 F -.2(vo)-.4 G -.1(ke).2 G 4.209
+(d, the).1 F F2(COMP_LINE)6.709 E F3(,)A F2(COMP_POINT)6.459 E F3(,)A F2
+(COMP_KEY)108 225.6 Q F3(,)A F0(and)2.408 E F2(COMP_TYPE)2.658 E F0 -.25
+(va)2.408 G .157(riables are assigned v).25 F .157
+(alues as described abo)-.25 F .457 -.15(ve u)-.15 H(nder).15 E F1 .157
+(Shell V)2.657 F(ariables)-.92 E F0 5.157(.I)C(f)-5.157 E 3.485(as)108
+237.6 S .986(hell function is being in)-3.485 F -.2(vo)-.4 G -.1(ke).2 G
+.986(d, the).1 F F2(COMP_W)3.486 E(ORDS)-.09 E F0(and)3.236 E F2
+(COMP_CW)3.486 E(ORD)-.09 E F0 -.25(va)3.236 G .986
+(riables are also set.).25 F(When)5.986 E .347
+(the function or command is in)108 249.6 R -.2(vo)-.4 G -.1(ke).2 G .347
+(d, the \214rst ar).1 F .346(gument \()-.18 F F1($1)A F0 2.846(\)i)C
+2.846(st)-2.846 G .346(he name of the command whose ar)-2.846 F(guments)
+-.18 E .263(are being completed, the second ar)108 261.6 R .263
+(gument \()-.18 F F1($2)A F0 2.763(\)i)C 2.763(st)-2.763 G .264(he w)
+-2.763 F .264(ord being completed, and the third ar)-.1 F .264
+(gument \()-.18 F F1($3)A F0 2.764(\)i)C(s)-2.764 E .629(the w)108 273.6
+R .629(ord preceding the w)-.1 F .629
+(ord being completed on the current command line.)-.1 F .628
+(No \214ltering of the generated)5.629 F .714(completions ag)108 285.6 R
+.714(ainst the w)-.05 F .714(ord being completed is performed; the func\
+tion or command has complete free-)-.1 F(dom in generating the matches.)
+108 297.6 Q(An)108 314.4 Q 2.938(yf)-.15 G .437
+(unction speci\214ed with)-2.938 F F1<ad46>2.937 E F0 .437(is in)2.937 F
+-.2(vo)-.4 G -.1(ke).2 G 2.937<648c>.1 G 2.937(rst. The)-2.937 F .437
+(function may use an)2.937 F 2.937(yo)-.15 G 2.937(ft)-2.937 G .437
+(he shell f)-2.937 F .437(acilities, including)-.1 F(the)108 326.4 Q F1
+(compgen)2.956 E F0 -.2(bu)2.956 G .456(iltin described belo).2 F 1.756
+-.65(w, t)-.25 H 2.956(og).65 G .456(enerate the matches.)-2.956 F .457
+(It must put the possible completions in the)5.456 F F2(COMPREPL)108
+338.4 Q(Y)-.828 E F0(array v)2.25 E(ariable, one per array element.)-.25
+E(Ne)108 355.2 Q .081(xt, an)-.15 F 2.581(yc)-.15 G .081
+(ommand speci\214ed with the)-2.581 F F1<ad43>2.581 E F0 .081
+(option is in)2.581 F -.2(vo)-.4 G -.1(ke).2 G 2.581(di).1 G 2.58(na)
+-2.581 G 2.58(ne)-2.58 G -.4(nv)-2.58 G .08(ironment equi).4 F -.25(va)
+-.25 G .08(lent to command sub-).25 F 2.858(stitution. It)108 367.2 R
+.359(should print a list of completions, one per line, to the standard \
+output.)2.858 F .359(Backslash may be used)5.359 F(to escape a ne)108
+379.2 Q(wline, if necessary)-.25 E(.)-.65 E .377
+(After all of the possible completions are generated, an)108 396 R 2.877
+<798c>-.15 G .377(lter speci\214ed with the)-2.877 F F1<ad58>2.876 E F0
+.376(option is applied to the)2.876 F 3.181(list. The)108 408 R .681
+(\214lter is a pattern as used for pathname e)3.181 F .681(xpansion; a)
+-.15 F F1(&)3.181 E F0 .682(in the pattern is replaced with the te)3.182
+F .682(xt of)-.15 F .523(the w)108 420 R .523(ord being completed.)-.1 F
+3.023(Al)5.523 G(iteral)-3.023 E F1(&)3.023 E F0 .522
+(may be escaped with a backslash; the backslash is remo)3.022 F -.15(ve)
+-.15 G 3.022(db).15 G(efore)-3.022 E .849(attempting a match.)108 432 R
+(An)5.849 E 3.349(yc)-.15 G .849
+(ompletion that matches the pattern will be remo)-3.349 F -.15(ve)-.15 G
+3.35(df).15 G .85(rom the list.)-3.35 F 3.35(Al)5.85 G(eading)-3.35 E F1
+(!)3.35 E F0(ne)108 444 Q -.05(ga)-.15 G .764
+(tes the pattern; in this case an).05 F 3.264(yc)-.15 G .764
+(ompletion not matching the pattern will be remo)-3.264 F -.15(ve)-.15 G
+3.264(d. If).15 F(the)3.264 E F1(nocase-)3.264 E(match)108 456 Q F0
+(shell option is enabled, the match is performed without re)2.5 E -.05
+(ga)-.15 G(rd to the case of alphabetic characters.).05 E(Finally)108
+472.8 Q 3.086(,a)-.65 G .886 -.15(ny p)-3.086 H .586(re\214x and suf).15
+F .587(\214x speci\214ed with the)-.25 F F1<ad50>3.087 E F0(and)3.087 E
+F1<ad53>3.087 E F0 .587(options are added to each member of the com-)
+3.087 F(pletion list, and the result is returned to the readline comple\
+tion code as the list of possible completions.)108 484.8 Q .247
+(If the pre)108 501.6 R .247(viously-applied actions do not generate an)
+-.25 F 2.747(ym)-.15 G .247(atches, and the)-2.747 F F1 .247(\255o dir)
+2.747 F(names)-.15 E F0 .247(option w)2.747 F .246(as supplied to)-.1 F
+F1(complete)108 513.6 Q F0(when the compspec w)2.5 E
+(as de\214ned, directory name completion is attempted.)-.1 E .461
+(If the)108 530.4 R F1 .462(\255o plusdirs)2.961 F F0 .462(option w)
+2.962 F .462(as supplied to)-.1 F F1(complete)2.962 E F0 .462
+(when the compspec w)2.962 F .462(as de\214ned, directory name com-)-.1
+F(pletion is attempted and an)108 542.4 Q 2.5(ym)-.15 G
+(atches are added to the results of the other actions.)-2.5 E .56
+(By def)108 559.2 R .56(ault, if a compspec is found, whate)-.1 F -.15
+(ve)-.25 G 3.06(ri).15 G 3.06(tg)-3.06 G .559
+(enerates is returned to the completion code as the full set)-3.06 F
+.631(of possible completions.)108 571.2 R .631(The def)5.631 F(ault)-.1
+E F1(bash)3.131 E F0 .631
+(completions are not attempted, and the readline def)3.131 F .632
+(ault of \214le-)-.1 F .559(name completion is disabled.)108 583.2 R
+.559(If the)5.559 F F1 .559(\255o bashdefault)3.059 F F0 .559(option w)
+3.059 F .559(as supplied to)-.1 F F1(complete)3.058 E F0 .558
+(when the compspec)3.058 F -.1(wa)108 595.2 S 3.171(sd).1 G .671
+(e\214ned, the)-3.171 F F1(bash)3.171 E F0(def)3.171 E .671
+(ault completions are attempted if the compspec generates no matches.)
+-.1 F .672(If the)5.672 F F1<ad6f>3.172 E(default)108 607.2 Q F0 1.207
+(option w)3.707 F 1.207(as supplied to)-.1 F F1(complete)3.707 E F0
+1.207(when the compspec w)3.707 F 1.207(as de\214ned, readline')-.1 F
+3.707(sd)-.55 G(ef)-3.707 E 1.206(ault completion)-.1 F
+(will be performed if the compspec \(and, if attempted, the def)108
+619.2 Q(ault)-.1 E F1(bash)2.5 E F0(completions\) generate no matches.)
+2.5 E .245(When a compspec indicates that directory name completion is \
+desired, the programmable completion func-)108 636 R .633(tions force r\
+eadline to append a slash to completed names which are symbolic links t\
+o directories, subject)108 648 R 2.761(to the v)108 660 R 2.761
+(alue of the)-.25 F F1(mark\255dir)5.261 E(ectories)-.18 E F0 2.761
+(readline v)5.261 F 2.761(ariable, re)-.25 F -.05(ga)-.15 G 2.762
+(rdless of the setting of the).05 F F1(mark-sym-)5.262 E(link)108 672 Q
+(ed\255dir)-.1 E(ectories)-.18 E F0(readline v)2.5 E(ariable.)-.25 E
+.191(There is some support for dynamically modifying completions.)108
+688.8 R .19(This is most useful when used in combina-)5.191 F 1.172
+(tion with a def)108 700.8 R 1.172(ault completion speci\214ed with)-.1
+F F1 1.172(complete \255D)3.672 F F0 6.172(.I)C(t')-6.172 E 3.672(sp)
+-.55 G 1.172(ossible for shell functions e)-3.672 F -.15(xe)-.15 G 1.172
+(cuted as).15 F .93(completion handlers to indicate that completion sho\
+uld be retried by returning an e)108 712.8 R .93(xit status of 124.)-.15
+F .93(If a)5.93 F .1(shell function returns 124, and changes the compsp\
+ec associated with the command on which completion is)108 724.8 R
+(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(53)190.395 E 0 Cg EP
+%%Page: 54 54
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E .666
+(being attempted \(supplied as the \214rst ar)108 84 R .665
+(gument when the function is e)-.18 F -.15(xe)-.15 G .665
+(cuted\), programmable completion).15 F .083(restarts from the be)108 96
+R .084(ginning, with an attempt to \214nd a ne)-.15 F 2.584(wc)-.25 G
+.084(ompspec for that command.)-2.584 F .084(This allo)5.084 F .084
+(ws a set of)-.25 F(completions to be b)108 108 Q(uilt dynamically as c\
+ompletion is attempted, rather than being loaded all at once.)-.2 E -.15
+(Fo)108 124.8 S 2.637(ri).15 G .137
+(nstance, assuming that there is a library of compspecs, each k)-2.637 F
+.137(ept in a \214le corresponding to the name of)-.1 F
+(the command, the follo)108 136.8 Q(wing def)-.25 E
+(ault completion function w)-.1 E(ould load completions dynamically:)-.1
+E/F1 10/Courier@0 SF(_completion_loader\(\))108 153.6 Q({)108 165.6 Q 6
+(.")144 177.6 S
+(/etc/bash_completion.d/$1.sh" >/dev/null 2>&1 && return 124)-6 E(})108
+189.6 Q(complete -D -F _completion_loader -o bashdefault -o default)108
+201.6 Q/F2 10.95/Times-Bold@0 SF(HIST)72 230.4 Q(OR)-.197 E(Y)-.383 E F0
+.371(When the)108 242.4 R/F3 10/Times-Bold@0 SF .371(\255o history)2.871
+F F0 .371(option to the)2.871 F F3(set)2.872 E F0 -.2(bu)2.872 G .372
+(iltin is enabled, the shell pro).2 F .372(vides access to the)-.15 F/F4
+10/Times-Italic@0 SF .372(command history)2.872 F F0(,)A .305
+(the list of commands pre)108 254.4 R .305(viously typed.)-.25 F .305
+(The v)5.305 F .304(alue of the)-.25 F/F5 9/Times-Bold@0 SF(HISTSIZE)
+2.804 E F0 -.25(va)2.554 G .304(riable is used as the number of com-).25
+F .429(mands to sa)108 266.4 R .729 -.15(ve i)-.2 H 2.929(nah).15 G .429
+(istory list.)-2.929 F .429(The te)5.429 F .429(xt of the last)-.15 F F5
+(HISTSIZE)2.93 E F0 .43(commands \(def)2.68 F .43(ault 500\) is sa)-.1 F
+-.15(ve)-.2 G 2.93(d. The).15 F(shell)2.93 E .287
+(stores each command in the history list prior to parameter and v)108
+278.4 R .287(ariable e)-.25 F .287(xpansion \(see)-.15 F F5(EXP)2.787 E
+(ANSION)-.666 E F0(abo)2.537 E -.15(ve)-.15 G(\)).15 E -.2(bu)108 290.4
+S 4.065(ta).2 G 1.565(fter history e)-4.065 F 1.565
+(xpansion is performed, subject to the v)-.15 F 1.565
+(alues of the shell v)-.25 F(ariables)-.25 E F5(HISTIGNORE)4.065 E F0
+(and)3.816 E F5(HISTCONTR)108 302.4 Q(OL)-.27 E/F6 9/Times-Roman@0 SF(.)
+A F0 .082
+(On startup, the history is initialized from the \214le named by the v)
+108 319.2 R(ariable)-.25 E F5(HISTFILE)2.582 E F0(\(def)2.332 E(ault)-.1
+E F4(~/.bash_history)2.582 E F0(\).)A .315(The \214le named by the v)108
+331.2 R .315(alue of)-.25 F F5(HISTFILE)2.815 E F0 .315
+(is truncated, if necessary)2.565 F 2.815(,t)-.65 G 2.815(oc)-2.815 G
+.315(ontain no more than the number of)-2.815 F .659
+(lines speci\214ed by the v)108 343.2 R .659(alue of)-.25 F F5
+(HISTFILESIZE)3.158 E F6(.)A F0(If)5.158 E F3(HISTFILESIZE)3.158 E F0
+.658(is unset, or set to null, a non-numeric)3.158 F -.25(va)108 355.2 S
+.142(lue, or a numeric v).25 F .142
+(alue less than zero, the history \214le is not truncated.)-.25 F .142
+(When the history \214le is read, lines)5.142 F(be)108 367.2 Q 1.605
+(ginning with the history comment character follo)-.15 F 1.604
+(wed immediately by a digit are interpreted as time-)-.25 F .15
+(stamps for the follo)108 379.2 R .15(wing history line.)-.25 F .151
+(These timestamps are optionally displayed depending on the v)5.151 F
+.151(alue of)-.25 F(the)108 391.2 Q F5(HISTTIMEFORMA)3.559 E(T)-.855 E
+F0 -.25(va)3.309 G 3.559(riable. When).25 F 3.559(as)3.559 G 1.059
+(hell with history enabled e)-3.559 F 1.059(xits, the last)-.15 F F5
+($HISTSIZE)3.559 E F0 1.058(lines are)3.309 F .158
+(copied from the history list to)108 403.2 R F5($HISTFILE)2.658 E F6(.)A
+F0 .158(If the)4.658 F F3(histappend)2.658 E F0 .159
+(shell option is enabled \(see the description of)2.659 F F3(shopt)108
+415.2 Q F0(under)2.582 E F5 .082(SHELL B)2.582 F(UIL)-.09 E .082
+(TIN COMMANDS)-.828 F F0(belo)2.332 E .082
+(w\), the lines are appended to the history \214le, otherwise the)-.25 F
+.196(history \214le is o)108 427.2 R -.15(ve)-.15 G 2.696(rwritten. If)
+.15 F F5(HISTFILE)2.696 E F0 .197(is unset, or if the history \214le is\
+ unwritable, the history is not sa)2.446 F -.15(ve)-.2 G(d.).15 E .584
+(If the)108 439.2 R F5(HISTTIMEFORMA)3.084 E(T)-.855 E F0 -.25(va)2.834
+G .584
+(riable is set, time stamps are written to the history \214le, mark).25
+F .583(ed with the his-)-.1 F 1.147(tory comment character)108 451.2 R
+3.647(,s)-.4 G 3.647(ot)-3.647 G(he)-3.647 E 3.647(ym)-.15 G 1.147
+(ay be preserv)-3.647 F 1.147(ed across shell sessions.)-.15 F 1.148
+(This uses the history comment)6.148 F 1.377
+(character to distinguish timestamps from other history lines.)108 463.2
+R 1.377(After sa)6.377 F 1.377(ving the history)-.2 F 3.876(,t)-.65 G
+1.376(he history \214le is)-3.876 F .756
+(truncated to contain no more than)108 475.2 R F5(HISTFILESIZE)3.257 E
+F0 3.257(lines. If)3.007 F F5(HISTFILESIZE)3.257 E F0 .757
+(is unset, or set to null, a non-)3.007 F(numeric v)108 487.2 Q
+(alue, or a numeric v)-.25 E
+(alue less than zero, the history \214le is not truncated.)-.25 E .299
+(The b)108 504 R .299(uiltin command)-.2 F F3(fc)2.799 E F0(\(see)2.799
+E F5 .299(SHELL B)2.799 F(UIL)-.09 E .299(TIN COMMANDS)-.828 F F0(belo)
+2.549 E .298(w\) may be used to list or edit and re-e)-.25 F -.15(xe)
+-.15 G(-).15 E .471(cute a portion of the history list.)108 516 R(The)
+5.471 E F3(history)2.971 E F0 -.2(bu)2.971 G .472
+(iltin may be used to display or modify the history list and).2 F .002
+(manipulate the history \214le.)108 528 R .001
+(When using command-line editing, search commands are a)5.002 F -.25(va)
+-.2 G .001(ilable in each edit-).25 F(ing mode that pro)108 540 Q
+(vide access to the history list.)-.15 E 1.485(The shell allo)108 556.8
+R 1.485(ws control o)-.25 F -.15(ve)-.15 G 3.986(rw).15 G 1.486
+(hich commands are sa)-3.986 F -.15(ve)-.2 G 3.986(do).15 G 3.986(nt)
+-3.986 G 1.486(he history list.)-3.986 F(The)6.486 E F5(HISTCONTR)3.986
+E(OL)-.27 E F0(and)3.736 E F5(HISTIGNORE)108 568.8 Q F0 -.25(va)2.708 G
+.458(riables may be set to cause the shell to sa).25 F .757 -.15(ve o)
+-.2 H .457(nly a subset of the commands entered.).15 F(The)5.457 E F3
+(cmdhist)108 580.8 Q F0 .75
+(shell option, if enabled, causes the shell to attempt to sa)3.25 F 1.05
+-.15(ve e)-.2 H .75(ach line of a multi-line command in).15 F 1.077
+(the same history entry)108 592.8 R 3.577(,a)-.65 G 1.077
+(dding semicolons where necessary to preserv)-3.577 F 3.577(es)-.15 G
+1.077(yntactic correctness.)-3.577 F(The)6.077 E F3(lithist)3.576 E F0
+.373(shell option causes the shell to sa)108 604.8 R .674 -.15(ve t)-.2
+H .374(he command with embedded ne).15 F .374
+(wlines instead of semicolons.)-.25 F .374(See the)5.374 F .319
+(description of the)108 616.8 R F3(shopt)2.819 E F0 -.2(bu)2.819 G .318
+(iltin belo).2 F 2.818(wu)-.25 G(nder)-2.818 E F5 .318(SHELL B)2.818 F
+(UIL)-.09 E .318(TIN COMMANDS)-.828 F F0 .318
+(for information on setting and)2.568 F(unsetting shell options.)108
+628.8 Q F2(HIST)72 645.6 Q(OR)-.197 E 2.738(YE)-.383 G(XP)-2.738 E
+(ANSION)-.81 E F0 .61(The shell supports a history e)108 657.6 R .611
+(xpansion feature that is similar to the history e)-.15 F .611
+(xpansion in)-.15 F F3(csh)3.111 E F0 5.611(.T)C .611(his section)-5.611
+F .871(describes what syntax features are a)108 669.6 R -.25(va)-.2 G
+3.371(ilable. This).25 F .871(feature is enabled by def)3.371 F .87
+(ault for interacti)-.1 F 1.17 -.15(ve s)-.25 H .87(hells, and).15 F
+.949(can be disabled using the)108 681.6 R F3(+H)3.449 E F0 .949
+(option to the)3.449 F F3(set)3.449 E F0 -.2(bu)3.449 G .949
+(iltin command \(see).2 F F5 .949(SHELL B)3.449 F(UIL)-.09 E .95
+(TIN COMMANDS)-.828 F F0(be-)3.2 E(lo)108 693.6 Q 2.5
+(w\). Non-interacti)-.25 F .3 -.15(ve s)-.25 H
+(hells do not perform history e).15 E(xpansion by def)-.15 E(ault.)-.1 E
+1.306(History e)108 710.4 R 1.306(xpansions introduce w)-.15 F 1.306(or\
+ds from the history list into the input stream, making it easy to repea\
+t)-.1 F .209(commands, insert the ar)108 722.4 R .209(guments to a pre)
+-.18 F .21
+(vious command into the current input line, or \214x errors in pre)-.25
+F(vious)-.25 E(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(54)
+190.395 E 0 Cg EP
+%%Page: 55 55
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E(commands quickly)
+108 84 Q(.)-.65 E 1.164(History e)108 100.8 R 1.163(xpansion is perform\
+ed immediately after a complete line is read, before the shell breaks i\
+t into)-.15 F -.1(wo)108 112.8 S .251
+(rds, and is performed on each line indi).1 F .251
+(vidually without taking quoting on pre)-.25 F .252
+(vious lines into account.)-.25 F(It)5.252 E(tak)108 124.8 Q .146
+(es place in tw)-.1 F 2.646(op)-.1 G 2.646(arts. The)-2.646 F .146(\214\
+rst is to determine which line from the history list to use during subs\
+titution.)2.646 F .766(The second is to select portions of that line fo\
+r inclusion into the current one.)108 136.8 R .767
+(The line selected from the)5.767 F .254(history is the)108 148.8 R/F1
+10/Times-Italic@0 SF -.15(ev)2.754 G(ent).15 E F0 2.753(,a)C .253
+(nd the portions of that line that are acted upon are)-2.753 F F1(wor)
+2.753 E(ds)-.37 E F0 5.253(.V)C(arious)-6.363 E F1(modi\214er)2.753 E(s)
+-.1 E F0 .253(are a)2.753 F -.25(va)-.2 G(il-).25 E .538
+(able to manipulate the selected w)108 160.8 R 3.038(ords. The)-.1 F
+.538(line is brok)3.038 F .538(en into w)-.1 F .539(ords in the same f)
+-.1 F .539(ashion as when reading)-.1 F .573(input, so that se)108 172.8
+R -.15(ve)-.25 G(ral).15 E F1(metac)3.073 E(har)-.15 E(acter)-.15 E F0
+.572(-separated w)B .572(ords surrounded by quotes are considered one w)
+-.1 F 3.072(ord. His-)-.1 F .355(tory e)108 184.8 R .355
+(xpansions are introduced by the appearance of the history e)-.15 F .355
+(xpansion character)-.15 F 2.855(,w)-.4 G .356(hich is)-2.855 F/F2 10
+/Times-Bold@0 SF(!)3.689 E F0 .356(by def)3.689 F(ault.)-.1 E .791
+(Only backslash \()108 196.8 R F2(\\).833 E F0 3.291(\)a).833 G .79
+(nd single quotes can quote the history e)-3.291 F .79
+(xpansion character)-.15 F 3.29(,b)-.4 G .79(ut the history e)-3.49 F
+(xpansion)-.15 E .789(character is also treated as quoted if it immedia\
+tely precedes the closing double quote in a double-quoted)108 208.8 R
+(string.)108 220.8 Q(Se)108 237.6 Q -.15(ve)-.25 G .03
+(ral characters inhibit history e).15 F .03
+(xpansion if found immediately follo)-.15 F .03(wing the history e)-.25
+F .03(xpansion character)-.15 F(,)-.4 E -2.15 -.25(ev e)108 249.6 T
+3.162(ni).25 G 3.162(fi)-3.162 G 3.162(ti)-3.162 G 3.162(su)-3.162 G
+.662(nquoted: space, tab, ne)-3.162 F .662(wline, carriage return, and)
+-.25 F F2(=)3.162 E F0 5.662(.I)C 3.162(ft)-5.662 G(he)-3.162 E F2
+(extglob)3.162 E F0 .662(shell option is enabled,)3.162 F F2(\()3.163 E
+F0(will also inhibit e)108 261.6 Q(xpansion.)-.15 E(Se)108 278.4 Q -.15
+(ve)-.25 G .11(ral shell options settable with the).15 F F2(shopt)2.61 E
+F0 -.2(bu)2.61 G .109(iltin may be used to tailor the beha).2 F .109
+(vior of history e)-.2 F(xpansion.)-.15 E .231(If the)108 290.4 R F2
+(histv)2.731 E(erify)-.1 E F0 .231
+(shell option is enabled \(see the description of the)2.731 F F2(shopt)
+2.731 E F0 -.2(bu)2.731 G .231(iltin belo).2 F .231(w\), and)-.25 F F2
+-.18(re)2.731 G(adline).18 E F0 .232(is be-)2.732 F .449(ing used, hist\
+ory substitutions are not immediately passed to the shell parser)108
+302.4 R 5.449(.I)-.55 G .448(nstead, the e)-5.449 F .448
+(xpanded line is)-.15 F 2.228(reloaded into the)108 314.4 R F2 -.18(re)
+4.728 G(adline).18 E F0 2.228(editing b)4.728 F(uf)-.2 E 2.228
+(fer for further modi\214cation.)-.25 F(If)7.228 E F2 -.18(re)4.728 G
+(adline).18 E F0 2.228(is being used, and the)4.728 F F2(histr)108 326.4
+Q(eedit)-.18 E F0 1.202(shell option is enabled, a f)3.702 F 1.202
+(ailed history substitution will be reloaded into the)-.1 F F2 -.18(re)
+3.702 G(adline).18 E F0(editing)3.702 E -.2(bu)108 338.4 S -.25(ff).2 G
+.303(er for correction.).25 F(The)5.303 E F2<ad70>2.803 E F0 .303
+(option to the)2.803 F F2(history)2.804 E F0 -.2(bu)2.804 G .304
+(iltin command may be used to see what a history e).2 F(x-)-.15 E .52
+(pansion will do before using it.)108 350.4 R(The)5.52 E F2<ad73>3.02 E
+F0 .52(option to the)3.02 F F2(history)3.02 E F0 -.2(bu)3.02 G .52
+(iltin may be used to add commands to the).2 F
+(end of the history list without actually e)108 362.4 Q -.15(xe)-.15 G
+(cuting them, so that the).15 E 2.5(ya)-.15 G(re a)-2.5 E -.25(va)-.2 G
+(ilable for subsequent recall.).25 E 1.108(The shell allo)108 379.2 R
+1.108(ws control of the v)-.25 F 1.108
+(arious characters used by the history e)-.25 F 1.108
+(xpansion mechanism \(see the de-)-.15 F .163(scription of)108 391.2 R
+F2(histchars)2.663 E F0(abo)2.663 E .463 -.15(ve u)-.15 H(nder).15 E F2
+.163(Shell V)2.663 F(ariables)-.92 E F0 2.663(\). The)B .162
+(shell uses the history comment character to mark)2.663 F
+(history timestamps when writing the history \214le.)108 403.2 Q F2(Ev)
+87 420 Q(ent Designators)-.1 E F0 .204(An e)108 432 R -.15(ve)-.25 G
+.204(nt designator is a reference to a command line entry in the histor\
+y list.).15 F .205(Unless the reference is abso-)5.204 F(lute, e)108 444
+Q -.15(ve)-.25 G(nts are relati).15 E .3 -.15(ve t)-.25 H 2.5(ot).15 G
+(he current position in the history list.)-2.5 E F2(!)108 460.8 Q F0
+1.608(Start a history substitution, e)144 460.8 R 1.608
+(xcept when follo)-.15 F 1.607(wed by a)-.25 F F2(blank)4.107 E F0 4.107
+(,n)C -.25(ew)-4.107 G 1.607(line, carriage return, = or \().25 F
+(\(when the)144 472.8 Q F2(extglob)2.5 E F0
+(shell option is enabled using the)2.5 E F2(shopt)2.5 E F0 -.2(bu)2.5 G
+(iltin\).).2 E F2(!)108 484.8 Q F1(n)A F0(Refer to command line)144
+484.8 Q F1(n)2.86 E F0(.).24 E F2<21ad>108 496.8 Q F1(n)A F0
+(Refer to the current command minus)144 496.8 Q F1(n)2.86 E F0(.).24 E
+F2(!!)108 508.8 Q F0(Refer to the pre)144 508.8 Q(vious command.)-.25 E
+(This is a synon)5 E(ym for `!\2551'.)-.15 E F2(!)108 520.8 Q F1(string)
+A F0 .865(Refer to the most recent command preceding the current positi\
+on in the history list starting with)144 520.8 R F1(string)144.34 532.8
+Q F0(.).22 E F2(!?)108 544.8 Q F1(string)A F2([?])A F0 1.503(Refer to t\
+he most recent command preceding the current position in the history li\
+st containing)144 556.8 R F1(string)144.34 568.8 Q F0 5.496(.T).22 G
+.496(he trailing)-5.496 F F2(?)2.996 E F0 .496(may be omitted if)2.996 F
+F1(string)3.336 E F0 .497(is follo)3.216 F .497(wed immediately by a ne)
+-.25 F 2.997(wline. If)-.25 F F1(string)2.997 E F0(is)2.997 E .391(miss\
+ing, the string from the most recent search is used; it is an error if \
+there is no pre)144 580.8 R .39(vious search)-.25 F(string.)144 592.8 Q
+/F3 12/Times-Bold@0 SF(^)108 609.8 Q F1(string1)-5 I F3(^)5 I F1
+(string2)-5 I F3(^)5 I F0 .752(Quick substitution.)144 616.8 R .752
+(Repeat the pre)5.752 F .753(vious command, replacing)-.25 F F1(string1)
+3.593 E F0(with)3.253 E F1(string2)3.593 E F0 5.753(.E).02 G(qui)-5.753
+E -.25(va)-.25 G .753(lent to).25 F -.74(``)144 628.8 S(!!:s).74 E/F4 12
+/Times-Roman@0 SF(^)5 I F1(string1)-5 I F4(^)5 I F1(string2)-5 I F4(^)5
+I F0 1.48 -.74('' \()-5 L(see).74 E F2(Modi\214ers)2.5 E F0(belo)2.5 E
+(w\).)-.25 E F2(!#)108 640.8 Q F0(The entire command line typed so f)144
+640.8 Q(ar)-.1 E(.)-.55 E F2 -.75(Wo)87 657.6 S(rd Designators).75 E F0
+-.8(Wo)108 669.6 S 1.314(rd designators are used to select desired w).8
+F 1.314(ords from the e)-.1 F -.15(ve)-.25 G 3.814(nt. A).15 F F2(:)
+3.814 E F0 1.313(separates the e)3.813 F -.15(ve)-.25 G 1.313
+(nt speci\214cation).15 F .529(from the w)108 681.6 R .529
+(ord designator)-.1 F 5.529(.I)-.55 G 3.029(tm)-5.529 G .529
+(ay be omitted if the w)-3.029 F .529(ord designator be)-.1 F .529
+(gins with a)-.15 F F2(^)3.029 E F0(,)A F2($)3.029 E F0(,)A F2(*)3.029 E
+F0(,)A F2<ad>3.029 E F0 3.029(,o)C(r)-3.029 E F2(%)3.029 E F0 5.53(.W)C
+(ords)-6.33 E .516(are numbered from the be)108 693.6 R .516
+(ginning of the line, with the \214rst w)-.15 F .516
+(ord being denoted by 0 \(zero\).)-.1 F -.8(Wo)5.515 G .515(rds are in-)
+.8 F(serted into the current line separated by single spaces.)108 705.6
+Q(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(55)190.395 E 0 Cg EP
+%%Page: 56 56
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF 2.5(0\()108 84 S(zer)-2.5 E(o\))-.18 E F0(The zeroth w)144 96 Q 2.5
+(ord. F)-.1 F(or the shell, this is the command w)-.15 E(ord.)-.1 E/F2
+10/Times-Italic@0 SF(n)108.36 108 Q F0(The)144 108 Q F2(n)2.5 E F0(th w)
+A(ord.)-.1 E F1(^)108 120 Q F0(The \214rst ar)144 120 Q 2.5
+(gument. That)-.18 F(is, w)2.5 E(ord 1.)-.1 E F1($)108 132 Q F0 .063
+(The last w)144 132 R 2.563(ord. This)-.1 F .063(is usually the last ar)
+2.563 F .064(gument, b)-.18 F .064(ut will e)-.2 F .064
+(xpand to the zeroth w)-.15 F .064(ord if there is only)-.1 F(one w)144
+144 Q(ord in the line.)-.1 E F1(%)108 156 Q F0 1.42(The \214rst w)144
+156 R 1.42(ord matched by the most recent `?)-.1 F F2(string)A F0 1.419
+(?' search, if the search string be)B 1.419(gins with a)-.15 F
+(character that is part of a w)144 168 Q(ord.)-.1 E F2(x)108.77 180 Q F1
+<ad>A F2(y)A F0 2.5(Ar)144 180 S(ange of w)-2.5 E(ords; `\255)-.1 E F2
+(y)A F0 2.5('a)C(bbre)-2.5 E(viates `0\255)-.25 E F2(y)A F0('.)A F1(*)
+108 192 Q F0 .315(All of the w)144 192 R .315(ords b)-.1 F .315
+(ut the zeroth.)-.2 F .315(This is a synon)5.315 F .315(ym for `)-.15 F
+F2(1\255$)A F0 2.815('. It)B .315(is not an error to use)2.815 F F1(*)
+2.816 E F0 .316(if there is)2.816 F(just one w)144 204 Q(ord in the e)
+-.1 E -.15(ve)-.25 G(nt; the empty string is returned in that case.).15
+E F1(x*)108 216 Q F0(Abbre)144 216 Q(viates)-.25 E F2(x\255$)2.5 E F0(.)
+A F1<78ad>108 228 Q F0(Abbre)144 228 Q(viates)-.25 E F2(x\255$)2.5 E F0
+(lik)2.5 E(e)-.1 E F1(x*)2.5 E F0 2.5(,b)C(ut omits the last w)-2.7 E
+2.5(ord. If)-.1 F F1(x)2.5 E F0(is missing, it def)2.5 E(aults to 0.)-.1
+E(If a w)108 244.8 Q(ord designator is supplied without an e)-.1 E -.15
+(ve)-.25 G(nt speci\214cation, the pre).15 E
+(vious command is used as the e)-.25 E -.15(ve)-.25 G(nt.).15 E F1
+(Modi\214ers)87 261.6 Q F0 .184(After the optional w)108 273.6 R .184
+(ord designator)-.1 F 2.684(,t)-.4 G .183
+(here may appear a sequence of one or more of the follo)-2.684 F .183
+(wing modi\214ers,)-.25 F(each preceded by a `:'.)108 285.6 Q
+(These modify)5 E 2.5(,o)-.65 G 2.5(re)-2.5 G(dit, the w)-2.5 E
+(ord or w)-.1 E(ords selected from the history e)-.1 E -.15(ve)-.25 G
+(nt.).15 E F1(h)108 302.4 Q F0(Remo)144 302.4 Q .3 -.15(ve a t)-.15 H
+(railing \214lename component, lea).15 E(ving only the head.)-.2 E F1(t)
+108 314.4 Q F0(Remo)144 314.4 Q .3 -.15(ve a)-.15 H
+(ll leading \214lename components, lea).15 E(ving the tail.)-.2 E F1(r)
+108 326.4 Q F0(Remo)144 326.4 Q .3 -.15(ve a t)-.15 H(railing suf).15 E
+(\214x of the form)-.25 E F2(.xxx)2.5 E F0 2.5(,l)C(ea)-2.5 E
+(ving the basename.)-.2 E F1(e)108 338.4 Q F0(Remo)144 338.4 Q .3 -.15
+(ve a)-.15 H(ll b).15 E(ut the trailing suf)-.2 E(\214x.)-.25 E F1(p)108
+350.4 Q F0(Print the ne)144 350.4 Q 2.5(wc)-.25 G(ommand b)-2.5 E
+(ut do not e)-.2 E -.15(xe)-.15 G(cute it.).15 E F1(q)108 362.4 Q F0
+(Quote the substituted w)144 362.4 Q
+(ords, escaping further substitutions.)-.1 E F1(x)108 374.4 Q F0 .385
+(Quote the substituted w)144 374.4 R .385(ords as with)-.1 F F1(q)2.885
+E F0 2.885(,b)C .386(ut break into w)-3.085 F .386(ords at)-.1 F F1
+(blanks)2.886 E F0 .386(and ne)2.886 F 2.886(wlines. The)-.25 F F1(q)
+2.886 E F0(and)2.886 E F1(x)2.886 E F0(modi\214ers are mutually e)144
+386.4 Q(xclusi)-.15 E -.15(ve)-.25 G 2.5(;t).15 G
+(he last one supplied is used.)-2.5 E F1(s/)108 398.4 Q F2(old)A F1(/)A
+F2(ne)A(w)-.15 E F1(/)A F0(Substitute)144 410.4 Q F2(ne)3.329 E(w)-.15 E
+F0 .469(for the \214rst occurrence of)3.279 F F2(old)3.199 E F0 .469
+(in the e)3.739 F -.15(ve)-.25 G .469(nt line.).15 F(An)5.469 E 2.969
+(yc)-.15 G .469(haracter may be used as the)-2.969 F .953
+(delimiter in place of /.)144 422.4 R .953
+(The \214nal delimiter is optional if it is the last character of the e)
+5.953 F -.15(ve)-.25 G .954(nt line.).15 F .131
+(The delimiter may be quoted in)144 434.4 R F2(old)2.861 E F0(and)3.401
+E F2(ne)2.991 E(w)-.15 E F0 .131(with a single backslash.)2.941 F .131
+(If & appears in)5.131 F F2(ne)2.991 E(w)-.15 E F0 2.631(,i).31 G 2.631
+(ti)-2.631 G 2.631(sr)-2.631 G(e-)-2.631 E .619(placed by)144 446.4 R F2
+(old)3.349 E F0 5.619(.A).77 G .619(single backslash will quote the &.)
+-2.5 F(If)5.619 E F2(old)3.349 E F0 .619(is null, it is set to the last)
+3.889 F F2(old)3.349 E F0(substi-)3.89 E .487(tuted, or)144 458.4 R
+2.987(,i)-.4 G 2.987(fn)-2.987 G 2.987(op)-2.987 G(re)-2.987 E .486
+(vious history substitutions took place, the last)-.25 F F2(string)3.326
+E F0 .486(in a)3.206 F F1(!?)2.986 E F2(string)A F1([?])A F0 2.986
+(search. If)5.486 F F2(ne)144.36 470.4 Q(w)-.15 E F0
+(is null, each matching)2.81 E F2(old)2.73 E F0(is deleted.)3.27 E F1(&)
+108 482.4 Q F0(Repeat the pre)144 482.4 Q(vious substitution.)-.25 E F1
+(g)108 494.4 Q F0 .397(Cause changes to be applied o)144 494.4 R -.15
+(ve)-.15 G 2.897(rt).15 G .398(he entire e)-2.897 F -.15(ve)-.25 G .398
+(nt line.).15 F .398(This is used in conjunction with `)5.398 F F1(:s)A
+F0 2.898('\()C(e.g.,)-2.898 E(`)144 506.4 Q F1(:gs/)A F2(old)A F1(/)A F2
+(ne)A(w)-.15 E F1(/)A F0 .351('\) or `)B F1(:&)A F0 2.851('. If)B .351
+(used with `)2.851 F F1(:s)A F0 .351(', an)B 2.851(yd)-.15 G .35
+(elimiter can be used in place of /, and the \214nal de-)-2.851 F
+(limiter is optional if it is the last character of the e)144 518.4 Q
+-.15(ve)-.25 G(nt line.).15 E(An)5 E F1(a)2.5 E F0
+(may be used as a synon)2.5 E(ym for)-.15 E F1(g)2.5 E F0(.)A F1(G)108
+530.4 Q F0(Apply the follo)144 530.4 Q(wing `)-.25 E F1(s)A F0 2.5('o)C
+2.5(r`)-2.5 G F1(&)-2.5 E F0 2.5('m)C(odi\214er once to each w)-2.5 E
+(ord in the e)-.1 E -.15(ve)-.25 G(nt line.).15 E/F3 10.95/Times-Bold@0
+SF(SHELL B)72 547.2 Q(UIL)-.11 E(TIN COMMANDS)-1.007 E F0 .062
+(Unless otherwise noted, each b)108 559.2 R .062(uiltin command documen\
+ted in this section as accepting options preceded by)-.2 F F1<ad>108
+571.2 Q F0(accepts)3.077 E F1<adad>3.077 E F0 .577
+(to signify the end of the options.)3.077 F(The)5.577 E F1(:)3.077 E F0
+(,)A F1(true)3.077 E F0(,)A F1(false)3.077 E F0 3.077(,a)C(nd)-3.077 E
+F1(test)3.077 E F0(/)A F1([)A F0 -.2(bu)3.077 G .577
+(iltins do not accept options).2 F .461(and do not treat)108 583.2 R F1
+<adad>2.961 E F0(specially)2.961 E 5.461(.T)-.65 G(he)-5.461 E F1(exit)
+2.961 E F0(,)A F1(logout)2.961 E F0(,)A F1 -.18(re)2.961 G(tur).18 E(n)
+-.15 E F0(,)A F1(br)2.961 E(eak)-.18 E F0(,)A F1(continue)2.961 E F0(,)A
+F1(let)2.961 E F0 2.961(,a)C(nd)-2.961 E F1(shift)2.961 E F0 -.2(bu)
+2.962 G .462(iltins accept and).2 F .261(process ar)108 595.2 R .261
+(guments be)-.18 F .261(ginning with)-.15 F F1<ad>2.761 E F0 .261
+(without requiring)2.761 F F1<adad>2.761 E F0 5.261(.O)C .261(ther b)
+-5.261 F .26(uiltins that accept ar)-.2 F .26(guments b)-.18 F .26
+(ut are not)-.2 F 1.154(speci\214ed as accepting options interpret ar)
+108 607.2 R 1.154(guments be)-.18 F 1.154(ginning with)-.15 F F1<ad>
+3.654 E F0 1.154(as in)3.654 F -.25(va)-.4 G 1.154
+(lid options and require).25 F F1<adad>3.654 E F0(to)3.654 E(pre)108
+619.2 Q -.15(ve)-.25 G(nt this interpretation.).15 E F1(:)108 637.2 Q F0
+([)2.5 E F2(ar)A(guments)-.37 E F0(])A .452(No ef)144 649.2 R .452
+(fect; the command does nothing be)-.25 F .452(yond e)-.15 F(xpanding)
+-.15 E F2(ar)3.282 E(guments)-.37 E F0 .451(and performing an)3.221 F
+2.951(ys)-.15 G(peci\214ed)-2.951 E 2.5(redirections. The)144 661.2 R
+(return status is zero.)2.5 E F1(.)110.5 678 Q F2(\214lename)6.666 E F0
+([)2.5 E F2(ar)A(guments)-.37 E F0(])A F1(sour)108 690 Q(ce)-.18 E F2
+(\214lename)2.5 E F0([)2.5 E F2(ar)A(guments)-.37 E F0(])A 1.02
+(Read and e)144 702 R -.15(xe)-.15 G 1.02(cute commands from).15 F F2
+(\214lename)5.43 E F0 1.02(in the current shell en)3.7 F 1.02
+(vironment and return the e)-.4 F(xit)-.15 E 1.331
+(status of the last command e)144 714 R -.15(xe)-.15 G 1.331(cuted from)
+.15 F F2(\214lename)5.741 E F0 6.331(.I).18 G(f)-6.331 E F2(\214lename)
+5.741 E F0 1.33(does not contain a slash, \214le-)4.011 F .488(names in)
+144 726 R/F4 9/Times-Bold@0 SF -.666(PA)2.988 G(TH)-.189 E F0 .488
+(are used to \214nd the directory containing)2.738 F F2(\214lename)4.899
+E F0 5.489(.T).18 G .489(he \214le searched for in)-5.489 F F4 -.666(PA)
+2.989 G(TH)-.189 E F0(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E
+(56)190.395 E 0 Cg EP
+%%Page: 57 57
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E .833
+(need not be e)144 84 R -.15(xe)-.15 G 3.333(cutable. When).15 F/F1 10
+/Times-Bold@0 SF(bash)3.333 E F0 .832(is not in)3.333 F/F2 10
+/Times-Italic@0 SF .832(posix mode)3.332 F F0 3.332(,t)C .832
+(he current directory is searched if no)-3.332 F .981
+(\214le is found in)144 96 R/F3 9/Times-Bold@0 SF -.666(PA)3.481 G(TH)
+-.189 E/F4 9/Times-Roman@0 SF(.)A F0 .981(If the)5.481 F F1(sour)3.481 E
+(cepath)-.18 E F0 .981(option to the)3.481 F F1(shopt)3.481 E F0 -.2(bu)
+3.481 G .981(iltin command is turned of).2 F .982(f, the)-.25 F F3 -.666
+(PA)144 108 S(TH)-.189 E F0 .112(is not searched.)2.363 F .112(If an)
+5.112 F(y)-.15 E F2(ar)2.612 E(guments)-.37 E F0 .112(are supplied, the)
+2.612 F 2.612(yb)-.15 G .112(ecome the positional parameters when)-2.612
+F F2(\214lename)144 120 Q F0 .485(is e)2.985 F -.15(xe)-.15 G 2.985
+(cuted. Otherwise).15 F .485(the positional parameters are unchanged.)
+2.985 F .485(If the)5.485 F F1<ad54>2.985 E F0 .485(option is en-)2.985
+F(abled,)144 132 Q F1(sour)3.325 E(ce)-.18 E F0 .825(inherits an)3.325 F
+3.325(yt)-.15 G .825(rap on)-3.325 F F1(DEB)3.325 E(UG)-.1 E F0 3.325
+(;i)C 3.325(fi)-3.325 G 3.324(ti)-3.325 G 3.324(sn)-3.324 G .824(ot, an)
+-3.324 F(y)-.15 E F1(DEB)3.324 E(UG)-.1 E F0 .824(trap string is sa)
+3.324 F -.15(ve)-.2 G 3.324(da).15 G .824(nd re-)-3.324 F .817
+(stored around the call to)144 144 R F1(sour)3.317 E(ce)-.18 E F0 3.317
+(,a)C(nd)-3.317 E F1(sour)3.317 E(ce)-.18 E F0 .817(unsets the)3.317 F
+F1(DEB)3.317 E(UG)-.1 E F0 .817(trap while it e)3.317 F -.15(xe)-.15 G
+3.317(cutes. If).15 F F1<ad54>3.317 E F0(is)3.318 E 1.435
+(not set, and the sourced \214le changes the)144 156 R F1(DEB)3.935 E
+(UG)-.1 E F0 1.435(trap, the ne)3.935 F 3.935(wv)-.25 G 1.435
+(alue is retained when)-4.185 F F1(sour)3.935 E(ce)-.18 E F0 3.762
+(completes. The)144 168 R 1.262
+(return status is the status of the last command e)3.762 F 1.263
+(xited within the script \(0 if no)-.15 F(commands are e)144 180 Q -.15
+(xe)-.15 G(cuted\), and f).15 E(alse if)-.1 E F2(\214lename)4.41 E F0
+(is not found or cannot be read.)2.68 E F1(alias)108 196.8 Q F0([)2.5 E
+F1<ad70>A F0 2.5(][)C F2(name)-2.5 E F0([=)A F2(value)A F0 2.5(].)C(..])
+-2.5 E F1(Alias)144 208.8 Q F0 2.725(with no ar)5.225 F 2.724
+(guments or with the)-.18 F F1<ad70>5.224 E F0 2.724
+(option prints the list of aliases in the form)5.224 F F1(alias)5.224 E
+F2(name)144 220.8 Q F0(=)A F2(value)A F0 .58(on standard output.)3.08 F
+.58(When ar)5.58 F .58
+(guments are supplied, an alias is de\214ned for each)-.18 F F2(name)
+3.08 E F0(whose)144 232.8 Q F2(value)2.509 E F0 .009(is gi)2.509 F -.15
+(ve)-.25 G 2.509(n. A).15 F .009(trailing space in)2.509 F F2(value)
+2.509 E F0 .009(causes the ne)2.509 F .009(xt w)-.15 F .009
+(ord to be check)-.1 F .008(ed for alias substi-)-.1 F .579
+(tution when the alias is e)144 244.8 R 3.079(xpanded. F)-.15 F .579
+(or each)-.15 F F2(name)3.079 E F0 .579(in the ar)3.079 F .579
+(gument list for which no)-.18 F F2(value)3.079 E F0 .579(is sup-)3.079
+F 1.314(plied, the name and v)144 256.8 R 1.314
+(alue of the alias is printed.)-.25 F F1(Alias)6.314 E F0 1.314
+(returns true unless a)3.814 F F2(name)3.814 E F0 1.313(is gi)3.814 F
+-.15(ve)-.25 G 3.813(nf).15 G(or)-3.813 E
+(which no alias has been de\214ned.)144 268.8 Q F1(bg)108 285.6 Q F0([)
+2.5 E F2(jobspec)A F0(...])2.5 E .744(Resume each suspended job)144
+297.6 R F2(jobspec)3.244 E F0 .745
+(in the background, as if it had been started with)3.244 F F1(&)3.245 E
+F0 5.745(.I)C(f)-5.745 E F2(job-)4.985 E(spec)144 309.6 Q F0 .672
+(is not present, the shell')3.482 F 3.172(sn)-.55 G .672(otion of the)
+-3.172 F F2(curr)3.172 E .672(ent job)-.37 F F0 .672(is used.)3.172 F F1
+(bg)5.671 E F2(jobspec)4.911 E F0 .671(returns 0 unless run)3.481 F .418
+(when job control is disabled or)144 321.6 R 2.919(,w)-.4 G .419
+(hen run with job control enabled, an)-2.919 F 2.919(ys)-.15 G
+(peci\214ed)-2.919 E F2(jobspec)2.919 E F0 -.1(wa)2.919 G 2.919(sn).1 G
+(ot)-2.919 E(found or w)144 333.6 Q(as started without job control.)-.1
+E F1(bind)108 350.4 Q F0([)2.5 E F1<ad6d>A F2 -.1(ke)2.5 G(ymap)-.2 E F0
+2.5(][)C F1(\255lpsvPSVX)-2.5 E F0(])A F1(bind)108 362.4 Q F0([)2.5 E F1
+<ad6d>A F2 -.1(ke)2.5 G(ymap)-.2 E F0 2.5(][)C F1<ad71>-2.5 E F2
+(function)2.5 E F0 2.5(][)C F1<ad75>-2.5 E F2(function)2.5 E F0 2.5(][)C
+F1<ad72>-2.5 E F2 -.1(ke)2.5 G(yseq)-.2 E F0(])A F1(bind)108 374.4 Q F0
+([)2.5 E F1<ad6d>A F2 -.1(ke)2.5 G(ymap)-.2 E F0(])A F1<ad66>2.5 E F2
+(\214lename)2.5 E F1(bind)108 386.4 Q F0([)2.5 E F1<ad6d>A F2 -.1(ke)2.5
+G(ymap)-.2 E F0(])A F1<ad78>2.5 E F2 -.1(ke)2.5 G(yseq)-.2 E F0(:)A F2
+(shell\255command)A F1(bind)108 398.4 Q F0([)2.5 E F1<ad6d>A F2 -.1(ke)
+2.5 G(ymap)-.2 E F0(])A F2 -.1(ke)2.5 G(yseq)-.2 E F0(:)A F2
+(function\255name)A F1(bind)108 410.4 Q F0([)2.5 E F1<ad6d>A F2 -.1(ke)
+2.5 G(ymap)-.2 E F0(])A F2 -.1(ke)2.5 G(yseq)-.2 E F0(:)A F2 -.37(re)C
+(adline\255command).37 E F0 .239(Display current)144 422.4 R F1 -.18(re)
+2.739 G(adline).18 E F0 -.1(ke)2.739 G 2.739(ya)-.05 G .239
+(nd function bindings, bind a k)-2.739 F .539 -.15(ey s)-.1 H .238
+(equence to a).15 F F1 -.18(re)2.738 G(adline).18 E F0 .238(function or)
+2.738 F .475(macro, or set a)144 434.4 R F1 -.18(re)2.975 G(adline).18 E
+F0 -.25(va)2.975 G 2.975(riable. Each).25 F .476(non-option ar)2.976 F
+.476(gument is a command as it w)-.18 F .476(ould appear in)-.1 F F2
+(.inputr)144.23 446.4 Q(c)-.37 E F0 2.968(,b).31 G .467
+(ut each binding or command must be passed as a separate ar)-3.168 F
+.467(gument; e.g., '"\\C\255x\\C\255r":)-.18 F 2.5
+(re\255read\255init\255\214le'. Options,)144 458.4 R(if supplied, ha)2.5
+E .3 -.15(ve t)-.2 H(he follo).15 E(wing meanings:)-.25 E F1<ad6d>144
+470.4 Q F2 -.1(ke)2.5 G(ymap)-.2 E F0(Use)180 482.4 Q F2 -.1(ke)5.158 G
+(ymap)-.2 E F0 2.658(as the k)5.348 F -.15(ey)-.1 G 2.658(map to be af)
+.15 F 2.659(fected by the subsequent bindings.)-.25 F(Acceptable)7.659 E
+F2 -.1(ke)180 494.4 S(ymap)-.2 E F0 3.193(names are)5.883 F F2 3.193
+(emacs, emacs\255standar)5.693 F 3.192
+(d, emacs\255meta, emacs\255ctlx, vi, vi\255mo)-.37 F(ve)-.1 E(,)-.1 E
+(vi\255command)180 506.4 Q F0 4.089(,a)C(nd)-4.089 E F2(vi\255insert)
+4.379 E F0(.).68 E F2(vi)6.589 E F0 1.589(is equi)4.089 F -.25(va)-.25 G
+1.589(lent to).25 F F2(vi\255command)4.089 E F0(\()4.089 E F2(vi\255mo)A
+(ve)-.1 E F0 1.59(is also a syn-)4.089 F(on)180 518.4 Q(ym\);)-.15 E F2
+(emacs)2.5 E F0(is equi)2.5 E -.25(va)-.25 G(lent to).25 E F2
+(emacs\255standar)2.5 E(d)-.37 E F0(.)A F1<ad6c>144 530.4 Q F0
+(List the names of all)180 530.4 Q F1 -.18(re)2.5 G(adline).18 E F0
+(functions.)2.5 E F1<ad70>144 542.4 Q F0(Display)180 542.4 Q F1 -.18(re)
+2.5 G(adline).18 E F0(function names and bindings in such a w)2.5 E
+(ay that the)-.1 E 2.5(yc)-.15 G(an be re-read.)-2.5 E F1<ad50>144 554.4
+Q F0(List current)180 554.4 Q F1 -.18(re)2.5 G(adline).18 E F0
+(function names and bindings.)2.5 E F1<ad73>144 566.4 Q F0(Display)180
+566.4 Q F1 -.18(re)3.655 G(adline).18 E F0 -.1(ke)3.655 G 3.655(ys)-.05
+G 1.155(equences bound to macros and the strings the)-3.655 F 3.655(yo)
+-.15 G 1.155(utput in such a)-3.655 F -.1(wa)180 578.4 S 2.5(yt).1 G
+(hat the)-2.5 E 2.5(yc)-.15 G(an be re-read.)-2.5 E F1<ad53>144 590.4 Q
+F0(Display)180 590.4 Q F1 -.18(re)2.5 G(adline).18 E F0 -.1(ke)2.5 G 2.5
+(ys)-.05 G(equences bound to macros and the strings the)-2.5 E 2.5(yo)
+-.15 G(utput.)-2.5 E F1<ad76>144 602.4 Q F0(Display)180 602.4 Q F1 -.18
+(re)2.5 G(adline).18 E F0 -.25(va)2.5 G(riable names and v).25 E
+(alues in such a w)-.25 E(ay that the)-.1 E 2.5(yc)-.15 G
+(an be re-read.)-2.5 E F1<ad56>144 614.4 Q F0(List current)180 614.4 Q
+F1 -.18(re)2.5 G(adline).18 E F0 -.25(va)2.5 G(riable names and v).25 E
+(alues.)-.25 E F1<ad66>144 626.4 Q F2(\214lename)2.5 E F0(Read k)180
+638.4 Q .3 -.15(ey b)-.1 H(indings from).15 E F2(\214lename)2.5 E F0(.)A
+F1<ad71>144 650.4 Q F2(function)2.5 E F0(Query about which k)180 662.4 Q
+-.15(ey)-.1 G 2.5(si).15 G -1.9 -.4(nv o)-2.5 H .2 -.1(ke t).4 H
+(he named).1 E F2(function)2.5 E F0(.)A F1<ad75>144 674.4 Q F2(function)
+2.5 E F0(Unbind all k)180 686.4 Q -.15(ey)-.1 G 2.5(sb).15 G
+(ound to the named)-2.5 E F2(function)2.5 E F0(.)A F1<ad72>144 698.4 Q
+F2 -.1(ke)2.5 G(yseq)-.2 E F0(Remo)180 710.4 Q .3 -.15(ve a)-.15 H .3
+-.15(ny c).15 H(urrent binding for).15 E F2 -.1(ke)2.5 G(yseq)-.2 E F0
+(.)A(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(57)190.395 E 0 Cg
+EP
+%%Page: 58 58
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF<ad78>144 84 Q/F2 10/Times-Italic@0 SF -.1(ke)2.5 G(yseq)-.2 E F1(:)A
+F2(shell\255command)A F0(Cause)180 96 Q F2(shell\255command)4.325 E F0
+1.825(to be e)4.325 F -.15(xe)-.15 G 1.825(cuted whene).15 F -.15(ve)
+-.25 G(r).15 E F2 -.1(ke)4.325 G(yseq)-.2 E F0 1.825(is entered.)4.325 F
+(When)6.825 E F2(shell\255com-)4.325 E(mand)180 108 Q F0 1.765(is e)
+4.265 F -.15(xe)-.15 G 1.765(cuted, the shell sets the).15 F/F3 9
+/Times-Bold@0 SF(READLINE_LINE)4.265 E F0 -.25(va)4.015 G 1.765
+(riable to the contents of the).25 F F1 -.18(re)180 120 S(adline).18 E
+F0 .375(line b)2.874 F(uf)-.2 E .375(fer and the)-.25 F F3
+(READLINE_POINT)2.875 E F0(and)2.625 E F3(READLINE_MARK)2.875 E F0 -.25
+(va)2.625 G .375(riables to the).25 F 1.186
+(current location of the insertion point and the sa)180 132 R -.15(ve)
+-.2 G 3.685(di).15 G 1.185(nsertion point \(the mark\), respec-)-3.685 F
+(ti)180 144 Q -.15(ve)-.25 G(ly).15 E 5.701(.I)-.65 G 3.201(ft)-5.701 G
+.701(he e)-3.201 F -.15(xe)-.15 G .701(cuted command changes the v).15 F
+.702(alue of an)-.25 F 3.202(yo)-.15 G(f)-3.202 E F3(READLINE_LINE)3.202
+E/F4 9/Times-Roman@0 SF(,)A F3(READ-)2.952 E(LINE_POINT)180 156 Q F4(,)A
+F0(or)3.581 E F3(READLINE_MARK)3.831 E F4(,)A F0 1.331(those ne)3.581 F
+3.831(wv)-.25 G 1.33(alues will be re\215ected in the editing)-4.081 F
+(state.)180 168 Q F1<ad58>144 180 Q F0 .829(List all k)180 180 R 1.129
+-.15(ey s)-.1 H .829
+(equences bound to shell commands and the associated commands in a for)
+.15 F(-)-.2 E(mat that can be reused as input.)180 192 Q(The return v)
+144 208.8 Q(alue is 0 unless an unrecognized option is gi)-.25 E -.15
+(ve)-.25 G 2.5(no).15 G 2.5(ra)-2.5 G 2.5(ne)-2.5 G(rror occurred.)-2.5
+E F1(br)108 225.6 Q(eak)-.18 E F0([)2.5 E F2(n)A F0(])A .055
+(Exit from within a)144 237.6 R F1 -.25(fo)2.555 G(r).25 E F0(,)A F1
+(while)2.555 E F0(,)A F1(until)2.555 E F0 2.555(,o)C(r)-2.555 E F1
+(select)2.555 E F0 2.555(loop. If)2.555 F F2(n)2.555 E F0 .055
+(is speci\214ed, break)2.555 F F2(n)2.555 E F0(le)2.555 E -.15(ve)-.25 G
+(ls.).15 E F2(n)5.414 E F0 .054(must be)2.794 F/F5 10/Symbol SF<b3>2.554
+E F0(1.)2.554 E(If)144 249.6 Q F2(n)3.074 E F0 .215(is greater than the\
+ number of enclosing loops, all enclosing loops are e)2.954 F 2.715
+(xited. The)-.15 F .215(return v)2.715 F(alue)-.25 E(is 0 unless)144
+261.6 Q F2(n)2.5 E F0(is not greater than or equal to 1.)2.5 E F1 -.2
+(bu)108 278.4 S(iltin).2 E F2(shell\255b)2.5 E(uiltin)-.2 E F0([)2.5 E
+F2(ar)A(guments)-.37 E F0(])A(Ex)144 290.4 Q .771
+(ecute the speci\214ed shell b)-.15 F .771(uiltin, passing it)-.2 F F2
+(ar)3.601 E(guments)-.37 E F0 3.271(,a).27 G .771(nd return its e)-3.271
+F .77(xit status.)-.15 F .77(This is useful)5.77 F .615
+(when de\214ning a function whose name is the same as a shell b)144
+302.4 R .616(uiltin, retaining the functionality of)-.2 F .57(the b)144
+314.4 R .57(uiltin within the function.)-.2 F(The)5.57 E F1(cd)3.07 E F0
+-.2(bu)3.07 G .57(iltin is commonly rede\214ned this w).2 F(ay)-.1 E
+5.57(.T)-.65 G .57(he return status)-5.57 F(is f)144 326.4 Q(alse if)-.1
+E F2(shell\255b)2.84 E(uiltin)-.2 E F0(is not a shell b)2.74 E
+(uiltin command.)-.2 E F1(caller)108 343.2 Q F0([)2.5 E F2 -.2(ex)C(pr)
+.2 E F0(])A .253(Returns the conte)144 355.2 R .254(xt of an)-.15 F
+2.754(ya)-.15 G(cti)-2.754 E .554 -.15(ve s)-.25 H .254
+(ubroutine call \(a shell function or a script e).15 F -.15(xe)-.15 G
+.254(cuted with the).15 F F1(.)2.754 E F0(or)2.754 E F1(sour)144 367.2 Q
+(ce)-.18 E F0 -.2(bu)2.825 G 2.825(iltins\). W).2 F(ithout)-.4 E F2 -.2
+(ex)2.825 G(pr).2 E F0(,)A F1(caller)2.825 E F0 .324
+(displays the line number and source \214lename of the current)2.824 F
+.253(subroutine call.)144 379.2 R .253(If a non-ne)5.253 F -.05(ga)-.15
+G(ti).05 E .553 -.15(ve i)-.25 H(nte).15 E .253(ger is supplied as)-.15
+F F2 -.2(ex)2.753 G(pr).2 E F0(,)A F1(caller)2.753 E F0 .254
+(displays the line number)2.754 F 2.754(,s)-.4 G(ub-)-2.754 E 1.327(rou\
+tine name, and source \214le corresponding to that position in the curr\
+ent e)144 391.2 R -.15(xe)-.15 G 1.327(cution call stack.).15 F(This e)
+144 403.2 Q(xtra information may be used, for e)-.15 E .001
+(xample, to print a stack trace.)-.15 F .001(The current frame is frame)
+5.001 F 3.02(0. The)144 415.2 R .52(return v)3.02 F .52
+(alue is 0 unless the shell is not e)-.25 F -.15(xe)-.15 G .519
+(cuting a subroutine call or).15 F F2 -.2(ex)3.019 G(pr).2 E F0 .519
+(does not corre-)3.019 F(spond to a v)144 427.2 Q
+(alid position in the call stack.)-.25 E F1(cd)108 444 Q F0([)2.5 E F1
+<ad4c>A F0(|[)A F1<ad50>A F0([)2.5 E F1<ad65>A F0(]] [\255@]] [)A F2
+(dir)A F0(])A .321(Change the current directory to)144 456 R F2(dir)
+2.821 E F0 5.321(.i)C(f)-5.321 E F2(dir)2.821 E F0 .322
+(is not supplied, the v)2.821 F .322(alue of the)-.25 F F3(HOME)2.822 E
+F0 .322(shell v)2.572 F .322(ariable is)-.25 F 1.036(the def)144 468 R
+3.536(ault. An)-.1 F 3.536(ya)-.15 G 1.035(dditional ar)-3.536 F 1.035
+(guments follo)-.18 F(wing)-.25 E F2(dir)3.535 E F0 1.035(are ignored.)
+3.535 F 1.035(The v)6.035 F(ariable)-.25 E F3(CDP)3.535 E -.855(AT)-.666
+G(H).855 E F0(de\214nes)3.285 E .826
+(the search path for the directory containing)144 480 R F2(dir)3.676 E
+F0 3.326(:e).73 G .826(ach directory name in)-3.326 F F3(CDP)3.326 E
+-.855(AT)-.666 G(H).855 E F0 .827(is searched for)3.077 F F2(dir)144 492
+Q F0 5.665(.A)C(lternati)-5.665 E .965 -.15(ve d)-.25 H .665
+(irectory names in).15 F F3(CDP)3.165 E -.855(AT)-.666 G(H).855 E F0
+.665(are separated by a colon \(:\).)2.915 F 3.165(An)5.665 G .664
+(ull directory name)-3.165 F(in)144 504 Q F3(CDP)3.101 E -.855(AT)-.666
+G(H).855 E F0 .601(is the same as the current directory)2.851 F 3.102
+(,i)-.65 G .602(.e., `)-3.102 F(`)-.74 E F1(.)A F0 -.74('')C 5.602(.I)
+.74 G(f)-5.602 E F2(dir)3.452 E F0(be)3.832 E .602
+(gins with a slash \(/\), then)-.15 F F3(CD-)3.102 E -.666(PA)144 516 S
+(TH)-.189 E F0 1.003(is not used.)3.254 F(The)6.003 E F1<ad50>3.503 E F0
+1.003(option causes)3.503 F F1(cd)3.503 E F0 1.003(to use the ph)3.503 F
+1.003(ysical directory structure by resolving)-.05 F .123
+(symbolic links while tra)144 528 R -.15(ve)-.2 G(rsing).15 E F2(dir)
+2.623 E F0 .123(and before processing instances of)2.623 F F2(..)2.623 E
+F0(in)2.623 E F2(dir)2.623 E F0 .123(\(see also the)2.623 F F1<ad50>
+2.623 E F0(op-)2.623 E .43(tion to the)144 540 R F1(set)2.93 E F0 -.2
+(bu)2.93 G .43(iltin command\); the).2 F F1<ad4c>2.929 E F0 .429
+(option forces symbolic links to be follo)2.929 F .429(wed by resolving)
+-.25 F .472(the link after processing instances of)144 552 R F2(..)2.972
+E F0(in)2.972 E F2(dir)2.973 E F0 5.473(.I)C(f)-5.473 E F2(..)2.973 E F0
+.473(appears in)2.973 F F2(dir)2.973 E F0 2.973(,i)C 2.973(ti)-2.973 G
+2.973(sp)-2.973 G .473(rocessed by remo)-2.973 F .473(ving the)-.15 F
+.948(immediately pre)144 564 R .948(vious pathname component from)-.25 F
+F2(dir)3.448 E F0 3.448(,b)C .948(ack to a slash or the be)-3.448 F .948
+(ginning of)-.15 F F2(dir)3.448 E F0 5.948(.I)C(f)-5.948 E(the)144 576 Q
+F1<ad65>2.868 E F0 .368(option is supplied with)2.868 F F1<ad50>2.868 E
+F0 2.868(,a)C .368(nd the current w)-2.868 F .368
+(orking directory cannot be successfully deter)-.1 F(-)-.2 E .612
+(mined after a successful directory change,)144 588 R F1(cd)3.112 E F0
+.612(will return an unsuccessful status.)3.112 F .612(On systems that)
+5.612 F .353(support it, the)144 600 R F1<ad40>2.853 E F0 .354
+(option presents the e)2.853 F .354(xtended attrib)-.15 F .354
+(utes associated with a \214le as a directory)-.2 F 5.354(.A)-.65 G(n)
+-5.354 E(ar)144 612 Q .072(gument of)-.18 F F1<ad>2.572 E F0 .072
+(is con)2.572 F -.15(ve)-.4 G .072(rted to).15 F F3($OLDPWD)2.572 E F0
+.072(before the directory change is attempted.)2.322 F .072
+(If a non-empty)5.072 F .054(directory name from)144 624 R F3(CDP)2.554
+E -.855(AT)-.666 G(H).855 E F0 .054(is used, or if)2.304 F F1<ad>2.555 E
+F0 .055(is the \214rst ar)2.555 F .055
+(gument, and the directory change is suc-)-.18 F .168
+(cessful, the absolute pathname of the ne)144 636 R 2.668(ww)-.25 G .168
+(orking directory is written to the standard output.)-2.768 F(The)5.168
+E(return v)144 648 Q(alue is true if the directory w)-.25 E
+(as successfully changed; f)-.1 E(alse otherwise.)-.1 E F1(command)108
+664.8 Q F0([)2.5 E F1(\255pVv)A F0(])A F2(command)2.5 E F0([)2.5 E F2
+(ar)A(g)-.37 E F0(...])2.5 E(Run)144 676.8 Q F2(command)2.764 E F0(with)
+3.334 E F2(ar)2.894 E(gs)-.37 E F0 .065
+(suppressing the normal shell function lookup.)2.834 F .065(Only b)5.065
+F .065(uiltin commands or)-.2 F .502(commands found in the)144 688.8 R
+F3 -.666(PA)3.002 G(TH)-.189 E F0 .502(are e)2.752 F -.15(xe)-.15 G
+3.002(cuted. If).15 F(the)3.002 E F1<ad70>3.002 E F0 .502(option is gi)
+3.002 F -.15(ve)-.25 G .501(n, the search for).15 F F2(command)3.201 E
+F0(is)3.771 E .399(performed using a def)144 700.8 R .399(ault v)-.1 F
+.399(alue for)-.25 F F3 -.666(PA)2.899 G(TH)-.189 E F0 .4
+(that is guaranteed to \214nd all of the standard utilities.)2.649 F(If)
+5.4 E .175(either the)144 712.8 R F1<ad56>2.675 E F0(or)2.675 E F1<ad76>
+2.675 E F0 .175(option is supplied, a description of)2.675 F F2(command)
+2.875 E F0 .174(is printed.)3.445 F(The)5.174 E F1<ad76>2.674 E F0 .174
+(option causes)2.674 F 3.317(as)144 724.8 S .817(ingle w)-3.317 F .817
+(ord indicating the command or \214lename used to in)-.1 F -.2(vo)-.4 G
+-.1(ke).2 G F2(command)3.618 E F0 .818(to be displayed; the)4.088 F
+(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(58)190.395 E 0 Cg EP
+%%Page: 59 59
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF<ad56>144 84 Q F0 .25(option produces a more v)2.75 F .25
+(erbose description.)-.15 F .249(If the)5.25 F F1<ad56>2.749 E F0(or)
+2.749 E F1<ad76>2.749 E F0 .249(option is supplied, the e)2.749 F .249
+(xit status)-.15 F 1.004(is 0 if)144 96 R/F2 10/Times-Italic@0 SF
+(command)3.704 E F0 -.1(wa)4.274 G 3.504(sf).1 G 1.005
+(ound, and 1 if not.)-3.504 F 1.005
+(If neither option is supplied and an error occurred or)6.005 F F2
+(command)144.2 108 Q F0 1.599(cannot be found, the e)4.869 F 1.599
+(xit status is 127.)-.15 F 1.599(Otherwise, the e)6.599 F 1.598
+(xit status of the)-.15 F F1(command)4.098 E F0 -.2(bu)144 120 S
+(iltin is the e).2 E(xit status of)-.15 E F2(command)2.7 E F0(.).77 E F1
+(compgen)108 136.8 Q F0([)2.5 E F2(option)A F0 2.5(][)C F2(wor)-2.5 E(d)
+-.37 E F0(])A .012(Generate possible completion matches for)144 148.8 R
+F2(wor)2.513 E(d)-.37 E F0 .013(according to the)2.513 F F2(option)2.513
+E F0 .013(s, which may be an)B 2.513(yo)-.15 G(ption)-2.513 E .982
+(accepted by the)144 160.8 R F1(complete)3.482 E F0 -.2(bu)3.481 G .981
+(iltin with the e).2 F .981(xception of)-.15 F F1<ad70>3.481 E F0(and)
+3.481 E F1<ad72>3.481 E F0 3.481(,a)C .981(nd write the matches to the)
+-3.481 F .13(standard output.)144 172.8 R .13(When using the)5.13 F F1
+<ad46>2.63 E F0(or)2.63 E F1<ad43>2.631 E F0 .131(options, the v)2.631 F
+.131(arious shell v)-.25 F .131(ariables set by the program-)-.25 F
+(mable completion f)144 184.8 Q(acilities, while a)-.1 E -.25(va)-.2 G
+(ilable, will not ha).25 E .3 -.15(ve u)-.2 H(seful v).15 E(alues.)-.25
+E .352(The matches will be generated in the same w)144 208.8 R .352
+(ay as if the programmable completion code had gen-)-.1 F .02(erated th\
+em directly from a completion speci\214cation with the same \215ags.)144
+220.8 R(If)5.02 E F2(wor)2.52 E(d)-.37 E F0 .02(is speci\214ed, only)
+2.52 F(those completions matching)144 232.8 Q F2(wor)2.5 E(d)-.37 E F0
+(will be displayed.)2.5 E(The return v)144 256.8 Q
+(alue is true unless an in)-.25 E -.25(va)-.4 G
+(lid option is supplied, or no matches were generated.).25 E F1
+(complete)108 273.6 Q F0([)2.5 E F1(\255abcdefgjksuv)A F0 2.5(][)C F1
+<ad6f>-2.5 E F2(comp-option)2.5 E F0 2.5(][)C F1(\255DEI)-2.5 E F0 2.5
+(][)C F1<ad41>-2.5 E F2(action)2.5 E F0 2.5(][)C F1<ad47>-2.5 E F2
+(globpat)2.5 E F0 2.5(][)C F1<ad57>-2.5 E F2(wor)2.5 E(dlist)-.37 E F0
+(])A([)144 285.6 Q F1<ad46>A F2(function)2.5 E F0 2.5(][)C F1<ad43>-2.5
+E F2(command)2.5 E F0 2.5(][)C F1<ad58>-2.5 E F2(\214lterpat)2.5 E F0
+2.5(][)C F1<ad50>-2.5 E F2(pr)2.5 E(e\214x)-.37 E F0 2.5(][)C F1<ad53>
+-2.5 E F2(suf)2.5 E<8c78>-.18 E F0(])A F2(name)2.5 E F0([)2.5 E F2
+(name ...)A F0(])A F1(complete \255pr)108 297.6 Q F0([)2.5 E F1(\255DEI)
+A F0 2.5(][)C F2(name)-2.5 E F0(...])2.5 E .634(Specify ho)144 309.6 R
+3.134(wa)-.25 G -.18(rg)-3.134 G .634(uments to each).18 F F2(name)3.134
+E F0 .634(should be completed.)3.134 F .633(If the)5.634 F F1<ad70>3.133
+E F0 .633(option is supplied, or if no)3.133 F .139
+(options are supplied, e)144 321.6 R .139
+(xisting completion speci\214cations are printed in a w)-.15 F .14
+(ay that allo)-.1 F .14(ws them to be)-.25 F .31(reused as input.)144
+333.6 R(The)5.31 E F1<ad72>2.81 E F0 .31(option remo)2.81 F -.15(ve)-.15
+G 2.81(sac).15 G .31(ompletion speci\214cation for each)-2.81 F F2(name)
+2.81 E F0 2.81(,o)C 1.11 -.4(r, i)-2.81 H 2.81(fn).4 G(o)-2.81 E F2
+(name)2.81 E F0(s)A 1.207
+(are supplied, all completion speci\214cations.)144 345.6 R(The)6.207 E
+F1<ad44>3.707 E F0 1.208(option indicates that other supplied options)
+3.708 F .5(and actions should apply to the `)144 357.6 R(`def)-.74 E
+(ault')-.1 E 3('c)-.74 G .5
+(ommand completion; that is, completion attempted on)-3 F 3.455(ac)144
+369.6 S .955(ommand for which no completion has pre)-3.455 F .955
+(viously been de\214ned.)-.25 F(The)5.955 E F1<ad45>3.455 E F0 .955
+(option indicates that)3.455 F .876
+(other supplied options and actions should apply to `)144 381.6 R
+(`empty')-.74 E 3.376('c)-.74 G .876(ommand completion; that is, com-)
+-3.376 F .447(pletion attempted on a blank line.)144 393.6 R(The)5.447 E
+F1<ad49>2.947 E F0 .448
+(option indicates that other supplied options and actions)2.947 F .123
+(should apply to completion on the initial non-assignment w)144 405.6 R
+.123(ord on the line, or after a command de-)-.1 F 1.02(limiter such as)
+144 417.6 R F1(;)3.52 E F0(or)3.52 E F1(|)3.52 E F0 3.52(,w)C 1.021
+(hich is usually command name completion.)-3.52 F 1.021
+(If multiple options are sup-)6.021 F .708(plied, the)144 429.6 R F1
+<ad44>3.208 E F0 .708(option tak)3.208 F .708(es precedence o)-.1 F -.15
+(ve)-.15 G(r).15 E F1<ad45>3.208 E F0 3.208(,a)C .708(nd both tak)-3.208
+F 3.208(ep)-.1 G .707(recedence o)-3.208 F -.15(ve)-.15 G(r).15 E F1
+<ad49>3.207 E F0 5.707(.I)C 3.207(fa)-5.707 G 1.007 -.15(ny o)-3.207 H
+(f).15 E F1<ad44>3.207 E F0(,)A F1<ad45>144 441.6 Q F0 2.603(,o)C(r)
+-2.603 E F1<ad49>2.603 E F0 .103(are supplied, an)2.603 F 2.603(yo)-.15
+G(ther)-2.603 E F2(name)2.603 E F0(ar)2.603 E .103
+(guments are ignored; these completions only apply to the)-.18 F
+(case speci\214ed by the option.)144 453.6 Q .153
+(The process of applying these completion speci\214cations when w)144
+477.6 R .152(ord completion is attempted is de-)-.1 F(scribed abo)144
+489.6 Q .3 -.15(ve u)-.15 H(nder).15 E F1(Pr)2.5 E
+(ogrammable Completion)-.18 E F0(.)A .555
+(Other options, if speci\214ed, ha)144 513.6 R .855 -.15(ve t)-.2 H .555
+(he follo).15 F .555(wing meanings.)-.25 F .555(The ar)5.555 F .555
+(guments to the)-.18 F F1<ad47>3.056 E F0(,)A F1<ad57>3.056 E F0 3.056
+(,a)C(nd)-3.056 E F1<ad58>3.056 E F0 .723(options \(and, if necessary)
+144 525.6 R 3.223(,t)-.65 G(he)-3.223 E F1<ad50>3.223 E F0(and)3.223 E
+F1<ad53>3.223 E F0 .722
+(options\) should be quoted to protect them from e)3.223 F(xpan-)-.15 E
+(sion before the)144 537.6 Q F1(complete)2.5 E F0 -.2(bu)2.5 G
+(iltin is in).2 E -.2(vo)-.4 G -.1(ke).2 G(d.).1 E F1<ad6f>144 549.6 Q
+F2(comp-option)2.5 E F0(The)184 561.6 Q F2(comp-option)2.79 E F0 .291
+(controls se)2.791 F -.15(ve)-.25 G .291(ral aspects of the compspec')
+.15 F 2.791(sb)-.55 G(eha)-2.791 E .291(vior be)-.2 F .291
+(yond the simple)-.15 F(generation of completions.)184 573.6 Q F2
+(comp-option)5 E F0(may be one of:)2.5 E F1(bashdefault)184 585.6 Q F0
+.281(Perform the rest of the def)224 597.6 R(ault)-.1 E F1(bash)2.781 E
+F0 .281(completions if the compspec generates no)2.781 F(matches.)224
+609.6 Q F1(default)184 621.6 Q F0 2.875(Use readline')224 621.6 R 5.375
+(sd)-.55 G(ef)-5.375 E 2.876
+(ault \214lename completion if the compspec generates no)-.1 F(matches.)
+224 633.6 Q F1(dir)184 645.6 Q(names)-.15 E F0(Perform directory name c\
+ompletion if the compspec generates no matches.)224 657.6 Q F1
+(\214lenames)184 669.6 Q F0 -.7(Te)224 681.6 S .137(ll readline that th\
+e compspec generates \214lenames, so it can perform an).7 F 2.636<798c>
+-.15 G(le-)-2.636 E .134(name\255speci\214c processing \(lik)224 693.6 R
+2.634(ea)-.1 G .134(dding a slash to directory names, quoting spe-)
+-2.634 F .45(cial characters, or suppressing trailing spaces\).)224
+705.6 R .45(Intended to be used with shell)5.45 F(functions.)224 717.6 Q
+(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(59)190.395 E 0 Cg EP
+%%Page: 60 60
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(noquote)184 84 Q F0 -.7(Te)224 84 S .814
+(ll readline not to quote the completed w).7 F .814(ords if the)-.1 F
+3.314(ya)-.15 G .815(re \214lenames \(quoting)-3.314 F
+(\214lenames is the def)224 96 Q(ault\).)-.1 E F1(nosort)184 108 Q F0
+-.7(Te)224 108 S(ll readline not to sort the list of possible completio\
+ns alphabetically).7 E(.)-.65 E F1(nospace)184 120 Q F0 -.7(Te)224 120 S
+.22(ll readline not to append a space \(the def).7 F .22(ault\) to w)-.1
+F .22(ords completed at the end)-.1 F(of the line.)224 132 Q F1
+(plusdirs)184 144 Q F0 1.985(After an)224 144 R 4.485(ym)-.15 G 1.985
+(atches de\214ned by the compspec are generated, directory name)-4.485 F
+.584(completion is attempted and an)224 156 R 3.084(ym)-.15 G .584
+(atches are added to the results of the other)-3.084 F(actions.)224 168
+Q F1<ad41>144 180 Q/F2 10/Times-Italic@0 SF(action)2.5 E F0(The)184 192
+Q F2(action)2.5 E F0(may be one of the follo)2.5 E
+(wing to generate a list of possible completions:)-.25 E F1(alias)184
+204 Q F0(Alias names.)224 204 Q(May also be speci\214ed as)5 E F1<ad61>
+2.5 E F0(.)A F1(arrayv)184 216 Q(ar)-.1 E F0(Array v)224 228 Q
+(ariable names.)-.25 E F1(binding)184 240 Q(Readline)224 240 Q F0 -.1
+(ke)2.5 G 2.5(yb)-.05 G(inding names.)-2.5 E F1 -.2(bu)184 252 S(iltin)
+.2 E F0(Names of shell b)224 252 Q(uiltin commands.)-.2 E
+(May also be speci\214ed as)5 E F1<ad62>2.5 E F0(.)A F1(command)184 264
+Q F0(Command names.)224 276 Q(May also be speci\214ed as)5 E F1<ad63>2.5
+E F0(.)A F1(dir)184 288 Q(ectory)-.18 E F0(Directory names.)224 300 Q
+(May also be speci\214ed as)5 E F1<ad64>2.5 E F0(.)A F1(disabled)184 312
+Q F0(Names of disabled shell b)224 324 Q(uiltins.)-.2 E F1(enabled)184
+336 Q F0(Names of enabled shell b)224 336 Q(uiltins.)-.2 E F1(export)184
+348 Q F0(Names of e)224 348 Q(xported shell v)-.15 E 2.5(ariables. May)
+-.25 F(also be speci\214ed as)2.5 E F1<ad65>2.5 E F0(.)A F1(\214le)184
+360 Q F0(File names.)224 360 Q(May also be speci\214ed as)5 E F1<ad66>
+2.5 E F0(.)A F1(function)184 372 Q F0(Names of shell functions.)224 384
+Q F1(gr)184 396 Q(oup)-.18 E F0(Group names.)224 396 Q
+(May also be speci\214ed as)5 E F1<ad67>2.5 E F0(.)A F1(helptopic)184
+408 Q F0(Help topics as accepted by the)224 420 Q F1(help)2.5 E F0 -.2
+(bu)2.5 G(iltin.).2 E F1(hostname)184 432 Q F0(Hostnames, as tak)224 444
+Q(en from the \214le speci\214ed by the)-.1 E/F3 9/Times-Bold@0 SF
+(HOSTFILE)2.5 E F0(shell v)2.25 E(ariable.)-.25 E F1(job)184 456 Q F0
+(Job names, if job control is acti)224 456 Q -.15(ve)-.25 G 5(.M).15 G
+(ay also be speci\214ed as)-5 E F1<ad6a>2.5 E F0(.)A F1 -.1(ke)184 468 S
+(yw).1 E(ord)-.1 E F0(Shell reserv)224 480 Q(ed w)-.15 E 2.5(ords. May)
+-.1 F(also be speci\214ed as)2.5 E F1<ad6b>2.5 E F0(.)A F1(running)184
+492 Q F0(Names of running jobs, if job control is acti)224 492 Q -.15
+(ve)-.25 G(.).15 E F1(ser)184 504 Q(vice)-.1 E F0(Service names.)224 504
+Q(May also be speci\214ed as)5 E F1<ad73>2.5 E F0(.)A F1(setopt)184 516
+Q F0 -1.11(Va)224 516 S(lid ar)1.11 E(guments for the)-.18 E F1<ad6f>2.5
+E F0(option to the)2.5 E F1(set)2.5 E F0 -.2(bu)2.5 G(iltin.).2 E F1
+(shopt)184 528 Q F0(Shell option names as accepted by the)224 528 Q F1
+(shopt)2.5 E F0 -.2(bu)2.5 G(iltin.).2 E F1(signal)184 540 Q F0
+(Signal names.)224 540 Q F1(stopped)184 552 Q F0
+(Names of stopped jobs, if job control is acti)224 552 Q -.15(ve)-.25 G
+(.).15 E F1(user)184 564 Q F0(User names.)224 564 Q
+(May also be speci\214ed as)5 E F1<ad75>2.5 E F0(.)A F1 -.1(va)184 576 S
+(riable).1 E F0(Names of all shell v)224 576 Q 2.5(ariables. May)-.25 F
+(also be speci\214ed as)2.5 E F1<ad76>2.5 E F0(.)A F1<ad43>144 588 Q F2
+(command)2.5 E(command)184 600 Q F0 1.055(is e)3.555 F -.15(xe)-.15 G
+1.055(cuted in a subshell en).15 F 1.056
+(vironment, and its output is used as the possible)-.4 F(completions.)
+184 612 Q F1<ad46>144 624 Q F2(function)2.5 E F0 .114
+(The shell function)184 636 R F2(function)2.614 E F0 .114(is e)2.614 F
+-.15(xe)-.15 G .114(cuted in the current shell en).15 F 2.614
+(vironment. When)-.4 F .113(the func-)2.613 F .816(tion is e)184 648 R
+-.15(xe)-.15 G .816(cuted, the \214rst ar).15 F .816(gument \()-.18 F F1
+($1)A F0 3.316(\)i)C 3.316(st)-3.316 G .817
+(he name of the command whose ar)-3.316 F(guments)-.18 E 1.407
+(are being completed, the second ar)184 660 R 1.407(gument \()-.18 F F1
+($2)A F0 3.907(\)i)C 3.907(st)-3.907 G 1.407(he w)-3.907 F 1.407
+(ord being completed, and the)-.1 F .103(third ar)184 672 R .103
+(gument \()-.18 F F1($3)A F0 2.603(\)i)C 2.603(st)-2.603 G .103(he w)
+-2.603 F .104(ord preceding the w)-.1 F .104
+(ord being completed on the current com-)-.1 F .102(mand line.)184 684 R
+.102(When it \214nishes, the possible completions are retrie)5.102 F
+-.15(ve)-.25 G 2.601(df).15 G .101(rom the v)-2.601 F .101(alue of the)
+-.25 F F3(COMPREPL)184 696 Q(Y)-.828 E F0(array v)2.25 E(ariable.)-.25 E
+(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(60)190.395 E 0 Cg EP
+%%Page: 61 61
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF<ad47>144 84 Q/F2 10/Times-Italic@0 SF(globpat)2.5 E F0 1.007
+(The pathname e)184 96 R 1.007(xpansion pattern)-.15 F F2(globpat)3.507
+E F0 1.007(is e)3.507 F 1.008(xpanded to generate the possible comple-)
+-.15 F(tions.)184 108 Q F1<ad50>144 120 Q F2(pr)2.5 E(e\214x)-.37 E(pr)
+184 132 Q(e\214x)-.37 E F0 .535(is added at the be)3.035 F .534
+(ginning of each possible completion after all other options ha)-.15 F
+-.15(ve)-.2 G(been applied.)184 144 Q F1<ad53>144 156 Q F2(suf)2.5 E
+<8c78>-.18 E(suf)184 156 Q<8c78>-.18 E F0
+(is appended to each possible completion after all other options ha)2.5
+E .3 -.15(ve b)-.2 H(een applied.).15 E F1<ad57>144 168 Q F2(wor)2.5 E
+(dlist)-.37 E F0(The)184 180 Q F2(wor)3.639 E(dlist)-.37 E F0 1.14
+(is split using the characters in the)3.639 F/F3 9/Times-Bold@0 SF(IFS)
+3.64 E F0 1.14(special v)3.39 F 1.14(ariable as delimiters, and)-.25 F
+.981(each resultant w)184 192 R .981(ord is e)-.1 F 3.481
+(xpanded. Shell)-.15 F .981(quoting is honored within)3.481 F F2(wor)
+3.481 E(dlist)-.37 E F0 3.48(,i)C 3.48(no)-3.48 G .98(rder to)-3.48 F
+(pro)184 204 Q .765(vide a mechanism for the w)-.15 F .766
+(ords to contain shell metacharacters or characters in the)-.1 F -.25
+(va)184 216 S 1.965(lue of).25 F F3(IFS)4.465 E/F4 9/Times-Roman@0 SF(.)
+A F0 1.964
+(The possible completions are the members of the resultant list which)
+6.465 F(match the w)184 228 Q(ord being completed.)-.1 E F1<ad58>144 240
+Q F2(\214lterpat)2.5 E(\214lterpat)184 252 Q F0 .455
+(is a pattern as used for pathname e)2.955 F 2.956(xpansion. It)-.15 F
+.456(is applied to the list of possible)2.956 F 1.596
+(completions generated by the preceding options and ar)184 264 R 1.596
+(guments, and each completion)-.18 F(matching)184 276 Q F2(\214lterpat)
+3.204 E F0 .704(is remo)3.204 F -.15(ve)-.15 G 3.204(df).15 G .704
+(rom the list.)-3.204 F 3.204(Al)5.704 G(eading)-3.204 E F1(!)3.204 E F0
+(in)3.204 E F2(\214lterpat)3.205 E F0(ne)3.205 E -.05(ga)-.15 G .705
+(tes the pattern;).05 F(in this case, an)184 288 Q 2.5(yc)-.15 G
+(ompletion not matching)-2.5 E F2(\214lterpat)2.5 E F0(is remo)2.5 E
+-.15(ve)-.15 G(d.).15 E .467(The return v)144 304.8 R .467
+(alue is true unless an in)-.25 F -.25(va)-.4 G .466
+(lid option is supplied, an option other than).25 F F1<ad70>2.966 E F0
+(or)2.966 E F1<ad72>2.966 E F0 .466(is sup-)2.966 F 1.361
+(plied without a)144 316.8 R F2(name)3.861 E F0(ar)3.861 E 1.361
+(gument, an attempt is made to remo)-.18 F 1.662 -.15(ve a c)-.15 H
+1.362(ompletion speci\214cation for a).15 F F2(name)144 328.8 Q F0
+(for which no speci\214cation e)2.5 E
+(xists, or an error occurs adding a completion speci\214cation.)-.15 E
+F1(compopt)108 345.6 Q F0([)2.5 E F1<ad6f>A F2(option)2.5 E F0 2.5(][)C
+F1(\255DEI)-2.5 E F0 2.5(][)C F1(+o)-2.5 E F2(option)2.5 E F0 2.5(][)C
+F2(name)-2.5 E F0(])A .447(Modify completion options for each)144 357.6
+R F2(name)2.947 E F0 .447(according to the)2.947 F F2(option)2.947 E F0
+.447(s, or for the currently-e)B -.15(xe)-.15 G(cuting).15 E .725
+(completion if no)144 369.6 R F2(name)3.225 E F0 3.225(sa)C .725
+(re supplied.)-3.225 F .725(If no)5.725 F F2(option)3.225 E F0 3.225(sa)
+C .725(re gi)-3.225 F -.15(ve)-.25 G .726
+(n, display the completion options for).15 F(each)144 381.6 Q F2(name)
+3.224 E F0 .724(or the current completion.)3.224 F .724(The possible v)
+5.724 F .724(alues of)-.25 F F2(option)3.224 E F0 .724(are those v)3.224
+F .723(alid for the)-.25 F F1(com-)3.223 E(plete)144 393.6 Q F0 -.2(bu)
+2.677 G .177(iltin described abo).2 F -.15(ve)-.15 G 5.178(.T).15 G(he)
+-5.178 E F1<ad44>2.678 E F0 .178
+(option indicates that other supplied options should apply to)2.678 F
+1.228(the `)144 405.6 R(`def)-.74 E(ault')-.1 E 3.728('c)-.74 G 1.228(o\
+mmand completion; that is, completion attempted on a command for which \
+no)-3.728 F 2.038(completion has pre)144 417.6 R 2.038
+(viously been de\214ned.)-.25 F(The)7.038 E F1<ad45>4.538 E F0 2.039
+(option indicates that other supplied options)4.538 F 1.539
+(should apply to `)144 429.6 R(`empty')-.74 E 4.039('c)-.74 G 1.538
+(ommand completion; that is, completion attempted on a blank line.)
+-4.039 F(The)144 441.6 Q F1<ad49>3.02 E F0 .52(option indicates that ot\
+her supplied options should apply to completion on the initial non-)3.02
+F .868(assignment w)144 453.6 R .868
+(ord on the line, or after a command delimiter such as)-.1 F F1(;)3.368
+E F0(or)3.368 E F1(|)3.368 E F0 3.367(,w)C .867(hich is usually com-)
+-3.367 F(mand name completion.)144 465.6 Q .431(The return v)144 489.6 R
+.431(alue is true unless an in)-.25 F -.25(va)-.4 G .431
+(lid option is supplied, an attempt is made to modify the op-).25 F
+(tions for a)144 501.6 Q F2(name)2.5 E F0
+(for which no completion speci\214cation e)2.5 E
+(xists, or an output error occurs.)-.15 E F1(continue)108 518.4 Q F0([)
+2.5 E F2(n)A F0(])A .851(Resume the ne)144 530.4 R .851
+(xt iteration of the enclosing)-.15 F F1 -.25(fo)3.351 G(r).25 E F0(,)A
+F1(while)3.351 E F0(,)A F1(until)3.351 E F0 3.351(,o)C(r)-3.351 E F1
+(select)3.35 E F0 3.35(loop. If)3.35 F F2(n)3.71 E F0 .85
+(is speci\214ed, re-)3.59 F .203(sume at the)144 542.4 R F2(n)2.703 E F0
+.203(th enclosing loop.)B F2(n)5.563 E F0 .203(must be)2.943 F/F5 10
+/Symbol SF<b3>2.703 E F0 2.704(1. If)2.703 F F2(n)3.064 E F0 .204
+(is greater than the number of enclosing loops,)2.944 F 1.184
+(the last enclosing loop \(the `)144 554.4 R(`top-le)-.74 E -.15(ve)-.25
+G(l').15 E 3.684('l)-.74 G 1.184(oop\) is resumed.)-3.684 F 1.183
+(The return v)6.184 F 1.183(alue is 0 unless)-.25 F F2(n)3.683 E F0
+1.183(is not)3.683 F(greater than or equal to 1.)144 566.4 Q F1(declar)
+108 583.2 Q(e)-.18 E F0([)2.5 E F1(\255aAfFgiIlnrtux)A F0 2.5(][)C F1
+<ad70>-2.5 E F0 2.5(][)C F2(name)-2.5 E F0([=)A F2(value)A F0 2.5(].)C
+(..])-2.5 E F1(typeset)108 595.2 Q F0([)2.5 E F1(\255aAfFgiIlnrtux)A F0
+2.5(][)C F1<ad70>-2.5 E F0 2.5(][)C F2(name)-2.5 E F0([=)A F2(value)A F0
+2.5(].)C(..])-2.5 E 1.264(Declare v)144 607.2 R 1.264
+(ariables and/or gi)-.25 F 1.564 -.15(ve t)-.25 H 1.264(hem attrib).15 F
+3.765(utes. If)-.2 F(no)3.765 E F2(name)3.765 E F0 3.765(sa)C 1.265
+(re gi)-3.765 F -.15(ve)-.25 G 3.765(nt).15 G 1.265(hen display the v)
+-3.765 F 1.265(alues of)-.25 F -.25(va)144 619.2 S 3.46(riables. The).25
+F F1<ad70>3.46 E F0 .96(option will display the attrib)3.46 F .96
+(utes and v)-.2 F .96(alues of each)-.25 F F2(name)3.82 E F0 5.96(.W).18
+G(hen)-5.96 E F1<ad70>3.46 E F0 .96(is used)3.46 F(with)144 631.2 Q F2
+(name)2.774 E F0(ar)2.774 E .274
+(guments, additional options, other than)-.18 F F1<ad66>2.775 E F0(and)
+2.775 E F1<ad46>2.775 E F0 2.775(,a)C .275(re ignored.)-2.775 F(When)
+5.275 E F1<ad70>2.775 E F0 .275(is supplied)2.775 F(without)144 643.2 Q
+F2(name)3.79 E F0(ar)3.79 E 1.29(guments, it will display the attrib)
+-.18 F 1.289(utes and v)-.2 F 1.289(alues of all v)-.25 F 1.289
+(ariables ha)-.25 F 1.289(ving the at-)-.2 F(trib)144 655.2 Q .38
+(utes speci\214ed by the additional options.)-.2 F .38
+(If no other options are supplied with)5.38 F F1<ad70>2.88 E F0(,)A F1
+(declar)2.88 E(e)-.18 E F0(will)2.88 E 1.107(display the attrib)144
+667.2 R 1.107(utes and v)-.2 F 1.106(alues of all shell v)-.25 F 3.606
+(ariables. The)-.25 F F1<ad66>3.606 E F0 1.106
+(option will restrict the display to)3.606 F .299(shell functions.)144
+679.2 R(The)5.299 E F1<ad46>2.799 E F0 .299(option inhibits the display\
+ of function de\214nitions; only the function name)2.799 F 1.54
+(and attrib)144 691.2 R 1.54(utes are printed.)-.2 F 1.54(If the)6.54 F
+F1(extdeb)4.04 E(ug)-.2 E F0 1.54(shell option is enabled using)4.04 F
+F1(shopt)4.04 E F0 4.04(,t)C 1.54(he source \214le)-4.04 F .648
+(name and line number where each)144 703.2 R F2(name)3.148 E F0 .648
+(is de\214ned are displayed as well.)3.148 F(The)5.648 E F1<ad46>3.148 E
+F0 .649(option implies)3.149 F F1<ad66>144 715.2 Q F0 5.837(.T)C(he)
+-5.837 E F1<ad67>3.337 E F0 .837(option forces v)3.337 F .836
+(ariables to be created or modi\214ed at the global scope, e)-.25 F -.15
+(ve)-.25 G 3.336(nw).15 G(hen)-3.336 E F1(de-)3.336 E(clar)144 727.2 Q
+(e)-.18 E F0 .818(is e)3.318 F -.15(xe)-.15 G .818
+(cuted in a shell function.).15 F .818
+(It is ignored in all other cases.)5.818 F(The)5.819 E F1<ad49>3.319 E
+F0 .819(option causes local)3.319 F(GNU Bash 5.1)72 768 Q
+(2020 October 29)141.235 E(61)190.395 E 0 Cg EP
+%%Page: 62 62
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E -.25(va)144 84 S
+.694(riables to inherit the attrib).25 F .694(utes \(e)-.2 F .694
+(xcept the)-.15 F/F1 10/Times-Italic@0 SF(namer)3.194 E(ef)-.37 E F0
+(attrib)3.194 E .693(ute\) and v)-.2 F .693(alue of an)-.25 F 3.193(ye)
+-.15 G .693(xisting v)-3.343 F(ariable)-.25 E .82(with the same)144 96 R
+F1(name)3.32 E F0 .82(at a surrounding scope.)3.32 F .82
+(If there is no e)5.82 F .82(xisting v)-.15 F .82(ariable, the local v)
+-.25 F .82(ariable is)-.25 F .38(initially unset.)144 108 R .38
+(The follo)5.38 F .379(wing options can be used to restrict output to v)
+-.25 F .379(ariables with the speci\214ed)-.25 F(attrib)144 120 Q
+(ute or to gi)-.2 E .3 -.15(ve v)-.25 H(ariables attrib)-.1 E(utes:)-.2
+E/F2 10/Times-Bold@0 SF<ad61>144 132 Q F0(Each)180 132 Q F1(name)2.5 E
+F0(is an inde)2.5 E -.15(xe)-.15 G 2.5(da).15 G(rray v)-2.5 E
+(ariable \(see)-.25 E F2(Arrays)2.5 E F0(abo)2.5 E -.15(ve)-.15 G(\).)
+.15 E F2<ad41>144 144 Q F0(Each)180 144 Q F1(name)2.5 E F0
+(is an associati)2.5 E .3 -.15(ve a)-.25 H(rray v).15 E(ariable \(see)
+-.25 E F2(Arrays)2.5 E F0(abo)2.5 E -.15(ve)-.15 G(\).).15 E F2<ad66>144
+156 Q F0(Use function names only)180 156 Q(.)-.65 E F2<ad69>144 168 Q F0
+.557(The v)180 168 R .558(ariable is treated as an inte)-.25 F .558
+(ger; arithmetic e)-.15 F -.25(va)-.25 G .558(luation \(see).25 F/F3 9
+/Times-Bold@0 SF .558(ARITHMETIC EV)3.058 F(ALU)-1.215 E(A-)-.54 E(TION)
+180 180 Q F0(abo)2.25 E -.15(ve)-.15 G 2.5(\)i).15 G 2.5(sp)-2.5 G
+(erformed when the v)-2.5 E(ariable is assigned a v)-.25 E(alue.)-.25 E
+F2<ad6c>144 192 Q F0 .91(When the v)180 192 R .909
+(ariable is assigned a v)-.25 F .909(alue, all upper)-.25 F .909
+(-case characters are con)-.2 F -.15(ve)-.4 G .909(rted to lo).15 F(wer)
+-.25 E(-)-.2 E 2.5(case. The)180 204 R(upper)2.5 E(-case attrib)-.2 E
+(ute is disabled.)-.2 E F2<ad6e>144 216 Q F0(Gi)180 216 Q 1.619 -.15
+(ve e)-.25 H(ach).15 E F1(name)3.819 E F0(the)3.819 E F1(namer)3.819 E
+(ef)-.37 E F0(attrib)3.819 E 1.319
+(ute, making it a name reference to another v)-.2 F(ariable.)-.25 E .478
+(That other v)180 228 R .478(ariable is de\214ned by the v)-.25 F .478
+(alue of)-.25 F F1(name)2.978 E F0 5.478(.A)C .478
+(ll references, assignments, and at-)-5.478 F(trib)180 240 Q .781
+(ute modi\214cations to)-.2 F F1(name)3.281 E F0 3.281(,e)C .782
+(xcept those using or changing the)-3.431 F F2<ad6e>3.282 E F0(attrib)
+3.282 E .782(ute itself, are)-.2 F .809(performed on the v)180 252 R
+.809(ariable referenced by)-.25 F F1(name)3.308 E F0 1.908 -.55('s v)D
+3.308(alue. The).3 F .808(nameref attrib)3.308 F .808(ute cannot be)-.2
+F(applied to array v)180 264 Q(ariables.)-.25 E F2<ad72>144 276 Q F0
+(Mak)180 276 Q(e)-.1 E F1(name)3.654 E F0 3.654(sr)C(eadonly)-3.654 E
+6.154(.T)-.65 G 1.154(hese names cannot then be assigned v)-6.154 F
+1.155(alues by subsequent as-)-.25 F(signment statements or unset.)180
+288 Q F2<ad74>144 300 Q F0(Gi)180 300 Q .73 -.15(ve e)-.25 H(ach).15 E
+F1(name)2.93 E F0(the)2.929 E F1(tr)2.929 E(ace)-.15 E F0(attrib)2.929 E
+2.929(ute. T)-.2 F .429(raced functions inherit the)-.35 F F2(DEB)2.929
+E(UG)-.1 E F0(and)2.929 E F2(RETURN)2.929 E F0
+(traps from the calling shell.)180 312 Q(The trace attrib)5 E
+(ute has no special meaning for v)-.2 E(ariables.)-.25 E F2<ad75>144 324
+Q F0 .909(When the v)180 324 R .909(ariable is assigned a v)-.25 F .909
+(alue, all lo)-.25 F(wer)-.25 E .909(-case characters are con)-.2 F -.15
+(ve)-.4 G .91(rted to upper).15 F(-)-.2 E 2.5(case. The)180 336 R(lo)2.5
+E(wer)-.25 E(-case attrib)-.2 E(ute is disabled.)-.2 E F2<ad78>144 348 Q
+F0(Mark)180 348 Q F1(name)2.5 E F0 2.5(sf)C(or e)-2.5 E
+(xport to subsequent commands via the en)-.15 E(vironment.)-.4 E .144
+(Using `+' instead of `\255' turns of)144 364.8 R 2.643(ft)-.25 G .143
+(he attrib)-2.643 F .143(ute instead, with the e)-.2 F .143
+(xceptions that)-.15 F F2(+a)2.643 E F0(and)2.643 E F2(+A)2.643 E F0
+.143(may not)2.643 F .578(be used to destro)144 376.8 R 3.079(ya)-.1 G
+.579(rray v)-3.079 F .579(ariables and)-.25 F F2(+r)3.079 E F0 .579
+(will not remo)3.079 F .879 -.15(ve t)-.15 H .579(he readonly attrib).15
+F 3.079(ute. When)-.2 F .579(used in a)3.079 F(function,)144 388.8 Q F2
+(declar)3.544 E(e)-.18 E F0(and)3.544 E F2(typeset)3.544 E F0(mak)3.544
+E 3.544(ee)-.1 G(ach)-3.544 E F1(name)3.543 E F0 1.043
+(local, as with the)3.543 F F2(local)3.543 E F0 1.043
+(command, unless the)3.543 F F2<ad67>3.543 E F0 1.205
+(option is supplied.)144 400.8 R 1.205(If a v)6.205 F 1.205
+(ariable name is follo)-.25 F 1.205(wed by =)-.25 F F1(value)A F0 3.705
+(,t)C 1.205(he v)-3.705 F 1.205(alue of the v)-.25 F 1.205
+(ariable is set to)-.25 F F1(value)144 412.8 Q F0 5.218(.W)C .218
+(hen using)-5.218 F F2<ad61>2.718 E F0(or)2.718 E F2<ad41>2.718 E F0
+.217(and the compound assignment syntax to create array v)2.717 F .217
+(ariables, addi-)-.25 F .882(tional attrib)144 424.8 R .882
+(utes do not tak)-.2 F 3.382(ee)-.1 G -.25(ff)-3.382 G .882
+(ect until subsequent assignments.).25 F .882(The return v)5.882 F .882
+(alue is 0 unless an)-.25 F(in)144 436.8 Q -.25(va)-.4 G .366(lid optio\
+n is encountered, an attempt is made to de\214ne a function using).25 F
+/F4 10/Courier@0 SF .365(\255f foo=bar)2.865 F F0 2.865(,a)C 2.865(na)
+-2.865 G(t-)-2.865 E .548(tempt is made to assign a v)144 448.8 R .548
+(alue to a readonly v)-.25 F .549
+(ariable, an attempt is made to assign a v)-.25 F .549(alue to an)-.25 F
+1.749(array v)144 460.8 R 1.749
+(ariable without using the compound assignment syntax \(see)-.25 F F2
+(Arrays)4.248 E F0(abo)4.248 E -.15(ve)-.15 G 1.748(\), one of the).15 F
+F1(names)144 472.8 Q F0 .359(is not a v)2.858 F .359(alid shell v)-.25 F
+.359(ariable name, an attempt is made to turn of)-.25 F 2.859(fr)-.25 G
+.359(eadonly status for a read-)-2.859 F 1.213(only v)144 484.8 R 1.213
+(ariable, an attempt is made to turn of)-.25 F 3.713(fa)-.25 G 1.213
+(rray status for an array v)-3.713 F 1.212(ariable, or an attempt is)
+-.25 F(made to display a non-e)144 496.8 Q(xistent function with)-.15 E
+F2<ad66>2.5 E F0(.)A F2(dirs [\255clpv] [+)108 513.6 Q F1(n)A F2 2.5(][)
+C<ad>-2.5 E F1(n)A F2(])A F0 -.4(Wi)144 525.6 S .328
+(thout options, displays the list of currently remembered directories.)
+.4 F .329(The def)5.329 F .329(ault display is on a)-.1 F 1.238
+(single line with directory names separated by spaces.)144 537.6 R 1.238
+(Directories are added to the list with the)6.238 F F2(pushd)144 549.6 Q
+F0 .927(command; the)3.427 F F2(popd)3.428 E F0 .928(command remo)3.428
+F -.15(ve)-.15 G 3.428(se).15 G .928(ntries from the list.)-3.428 F .928
+(The current directory is al-)5.928 F -.1(wa)144 561.6 S
+(ys the \214rst directory in the stack.).1 E F2<ad63>144 573.6 Q F0
+(Clears the directory stack by deleting all of the entries.)180 573.6 Q
+F2<ad6c>144 585.6 Q F0 .882
+(Produces a listing using full pathnames; the def)180 585.6 R .881
+(ault listing format uses a tilde to denote)-.1 F(the home directory)180
+597.6 Q(.)-.65 E F2<ad70>144 609.6 Q F0
+(Print the directory stack with one entry per line.)180 609.6 Q F2<ad76>
+144 621.6 Q F0 .272(Print the directory stack with one entry per line, \
+pre\214xing each entry with its inde)180 621.6 R 2.773(xi)-.15 G 2.773
+(nt)-2.773 G(he)-2.773 E(stack.)180 633.6 Q F2(+)144 645.6 Q F1(n)A F0
+1.565(Displays the)180 645.6 R F1(n)4.065 E F0 1.565
+(th entry counting from the left of the list sho)B 1.564(wn by)-.25 F F2
+(dirs)4.064 E F0 1.564(when in)4.064 F -.2(vo)-.4 G -.1(ke).2 G(d).1 E
+(without options, starting with zero.)180 657.6 Q F2<ad>144 669.6 Q F1
+(n)A F0 1.194(Displays the)180 669.6 R F1(n)3.694 E F0 1.194
+(th entry counting from the right of the list sho)B 1.194(wn by)-.25 F
+F2(dirs)3.694 E F0 1.194(when in)3.694 F -.2(vo)-.4 G -.1(ke).2 G(d).1 E
+(without options, starting with zero.)180 681.6 Q .258(The return v)144
+698.4 R .258(alue is 0 unless an in)-.25 F -.25(va)-.4 G .258
+(lid option is supplied or).25 F F1(n)2.758 E F0(inde)2.758 E -.15(xe)
+-.15 G 2.758(sb).15 G -.15(ey)-2.758 G .258(ond the end of the direc-)
+.15 F(tory stack.)144 710.4 Q(GNU Bash 5.1)72 768 Q(2020 October 29)
+141.235 E(62)190.395 E 0 Cg EP
+%%Page: 63 63
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(diso)108 84 Q(wn)-.1 E F0([)2.5 E F1(\255ar)A F0 2.5(][)C F1<ad68>
+-2.5 E F0 2.5(][)C/F2 10/Times-Italic@0 SF(jobspec)-2.5 E F0(... |)2.5 E
+F2(pid)2.5 E F0(... ])2.5 E -.4(Wi)144 96 S .121(thout options, remo).4
+F .422 -.15(ve e)-.15 H(ach).15 E F2(jobspec)4.362 E F0 .122
+(from the table of acti)2.932 F .422 -.15(ve j)-.25 H 2.622(obs. If).15
+F F2(jobspec)4.362 E F0 .122(is not present, and)2.932 F .096
+(neither the)144 108 R F1<ad61>2.596 E F0 .096(nor the)2.596 F F1<ad72>
+2.596 E F0 .096(option is supplied, the)2.596 F F2(curr)2.596 E .096
+(ent job)-.37 F F0 .096(is used.)2.596 F .096(If the)5.096 F F1<ad68>
+2.596 E F0 .096(option is gi)2.596 F -.15(ve)-.25 G .096(n, each).15 F
+F2(jobspec)145.74 120 Q F0 .585(is not remo)3.395 F -.15(ve)-.15 G 3.085
+(df).15 G .585(rom the table, b)-3.085 F .585(ut is mark)-.2 F .585
+(ed so that)-.1 F/F3 9/Times-Bold@0 SF(SIGHUP)3.085 E F0 .586
+(is not sent to the job if the)2.835 F .962(shell recei)144 132 R -.15
+(ve)-.25 G 3.462(sa).15 G F3(SIGHUP)A/F4 9/Times-Roman@0 SF(.)A F0 .962
+(If no)5.462 F F2(jobspec)5.202 E F0 .962(is supplied, the)3.772 F F1
+<ad61>3.462 E F0 .962(option means to remo)3.462 F 1.262 -.15(ve o)-.15
+H 3.462(rm).15 G .962(ark all)-3.462 F 1.358(jobs; the)144 144 R F1
+<ad72>3.858 E F0 1.358(option without a)3.858 F F2(jobspec)5.598 E F0
+(ar)4.169 E 1.359(gument restricts operation to running jobs.)-.18 F
+1.359(The return)6.359 F -.25(va)144 156 S(lue is 0 unless a).25 E F2
+(jobspec)4.24 E F0(does not specify a v)2.81 E(alid job)-.25 E(.)-.4 E
+F1(echo)108 172.8 Q F0([)2.5 E F1(\255neE)A F0 2.5(][)C F2(ar)-2.5 E(g)
+-.37 E F0(...])2.5 E .425(Output the)144 184.8 R F2(ar)2.925 E(g)-.37 E
+F0 .424(s, separated by spaces, follo)B .424(wed by a ne)-.25 F 2.924
+(wline. The)-.25 F .424(return status is 0 unless a write)2.924 F .307
+(error occurs.)144 196.8 R(If)5.307 E F1<ad6e>2.807 E F0 .307
+(is speci\214ed, the trailing ne)2.807 F .308(wline is suppressed.)-.25
+F .308(If the)5.308 F F1<ad65>2.808 E F0 .308(option is gi)2.808 F -.15
+(ve)-.25 G .308(n, inter).15 F(-)-.2 E .198(pretation of the follo)144
+208.8 R .198(wing backslash-escaped characters is enabled.)-.25 F(The)
+5.198 E F1<ad45>2.698 E F0 .197(option disables the in-)2.697 F .067
+(terpretation of these escape characters, e)144 220.8 R -.15(ve)-.25 G
+2.567(no).15 G 2.567(ns)-2.567 G .067(ystems where the)-2.567 F 2.567
+(ya)-.15 G .067(re interpreted by def)-2.567 F 2.568(ault. The)-.1 F F1
+(xpg_echo)144 232.8 Q F0 .602
+(shell option may be used to dynamically determine whether or not)3.102
+F F1(echo)3.101 E F0 -.15(ex)3.101 G .601(pands these).15 F .658
+(escape characters by def)144 244.8 R(ault.)-.1 E F1(echo)5.658 E F0
+.659(does not interpret)3.159 F F1<adad>3.159 E F0 .659
+(to mean the end of options.)3.159 F F1(echo)5.659 E F0(inter)3.159 E(-)
+-.2 E(prets the follo)144 256.8 Q(wing escape sequences:)-.25 E F1(\\a)
+144 268.8 Q F0(alert \(bell\))180 268.8 Q F1(\\b)144 280.8 Q F0
+(backspace)180 280.8 Q F1(\\c)144 292.8 Q F0(suppress further output)180
+292.8 Q F1(\\e)144 304.8 Q(\\E)144 316.8 Q F0(an escape character)180
+316.8 Q F1(\\f)144 328.8 Q F0(form feed)180 328.8 Q F1(\\n)144 340.8 Q
+F0(ne)180 340.8 Q 2.5(wl)-.25 G(ine)-2.5 E F1(\\r)144 352.8 Q F0
+(carriage return)180 352.8 Q F1(\\t)144 364.8 Q F0(horizontal tab)180
+364.8 Q F1(\\v)144 376.8 Q F0 -.15(ve)180 376.8 S(rtical tab).15 E F1
+(\\\\)144 388.8 Q F0(backslash)180 388.8 Q F1(\\0)144 400.8 Q F2(nnn)A
+F0(the eight-bit character whose v)180 400.8 Q(alue is the octal v)-.25
+E(alue)-.25 E F2(nnn)2.5 E F0(\(zero to three octal digits\))2.5 E F1
+(\\x)144 412.8 Q F2(HH)A F0(the eight-bit character whose v)180 412.8 Q
+(alue is the he)-.25 E(xadecimal v)-.15 E(alue)-.25 E F2(HH)2.5 E F0
+(\(one or tw)2.5 E 2.5(oh)-.1 G .3 -.15(ex d)-2.5 H(igits\)).15 E F1
+(\\u)144 424.8 Q F2(HHHH)A F0 1.507
+(the Unicode \(ISO/IEC 10646\) character whose v)180 436.8 R 1.506
+(alue is the he)-.25 F 1.506(xadecimal v)-.15 F(alue)-.25 E F2(HHHH)
+4.006 E F0(\(one to four he)180 448.8 Q 2.5(xd)-.15 G(igits\))-2.5 E F1
+(\\U)144 460.8 Q F2(HHHHHHHH)A F0 .547
+(the Unicode \(ISO/IEC 10646\) character whose v)180 472.8 R .547
+(alue is the he)-.25 F .548(xadecimal v)-.15 F(alue)-.25 E F2(HHHHH-)
+3.048 E(HHH)180 484.8 Q F0(\(one to eight he)2.5 E 2.5(xd)-.15 G
+(igits\))-2.5 E F1(enable)108 501.6 Q F0([)2.5 E F1<ad61>A F0 2.5(][)C
+F1(\255dnps)-2.5 E F0 2.5(][)C F1<ad66>-2.5 E F2(\214lename)2.5 E F0 2.5
+(][)C F2(name)-2.5 E F0(...])2.5 E .278(Enable and disable b)144 513.6 R
+.278(uiltin shell commands.)-.2 F .278(Disabling a b)5.278 F .278
+(uiltin allo)-.2 F .278(ws a disk command which has)-.25 F .833
+(the same name as a shell b)144 525.6 R .834(uiltin to be e)-.2 F -.15
+(xe)-.15 G .834(cuted without specifying a full pathname, e).15 F -.15
+(ve)-.25 G 3.334(nt).15 G(hough)-3.334 E .99
+(the shell normally searches for b)144 537.6 R .989
+(uiltins before disk commands.)-.2 F(If)5.989 E F1<ad6e>3.489 E F0 .989
+(is used, each)3.489 F F2(name)3.489 E F0 .989(is dis-)3.489 F .648
+(abled; otherwise,)144 549.6 R F2(names)3.148 E F0 .648(are enabled.)
+3.148 F -.15(Fo)5.648 G 3.148(re).15 G .648(xample, to use the)-3.298 F
+F1(test)3.148 E F0 .648(binary found via the)3.148 F F3 -.666(PA)3.148 G
+(TH)-.189 E F0(in-)2.899 E .539(stead of the shell b)144 561.6 R .538
+(uiltin v)-.2 F .538(ersion, run)-.15 F/F5 10/Courier@0 SF .538
+(enable -n test)3.038 F F0 5.538(.T)C(he)-5.538 E F1<ad66>3.038 E F0
+.538(option means to load the ne)3.038 F(w)-.25 E -.2(bu)144 573.6 S
+1.365(iltin command).2 F F2(name)4.225 E F0 1.365(from shared object)
+4.045 F F2(\214lename)5.775 E F0 3.865(,o).18 G 3.865(ns)-3.865 G 1.365
+(ystems that support dynamic loading.)-3.865 F(The)144 585.6 Q F1<ad64>
+2.867 E F0 .367(option will delete a b)2.867 F .367(uiltin pre)-.2 F
+.367(viously loaded with)-.25 F F1<ad66>2.866 E F0 5.366(.I)C 2.866(fn)
+-5.366 G(o)-2.866 E F2(name)2.866 E F0(ar)2.866 E .366(guments are gi)
+-.18 F -.15(ve)-.25 G .366(n, or).15 F .398(if the)144 597.6 R F1<ad70>
+2.898 E F0 .399(option is supplied, a list of shell b)2.899 F .399
+(uiltins is printed.)-.2 F -.4(Wi)5.399 G .399(th no other option ar).4
+F .399(guments, the)-.18 F .099(list consists of all enabled shell b)144
+609.6 R 2.598(uiltins. If)-.2 F F1<ad6e>2.598 E F0 .098
+(is supplied, only disabled b)2.598 F .098(uiltins are printed.)-.2 F
+(If)5.098 E F1<ad61>2.598 E F0 .905
+(is supplied, the list printed includes all b)144 621.6 R .905
+(uiltins, with an indication of whether or not each is en-)-.2 F 2.873
+(abled. If)144 633.6 R F1<ad73>2.873 E F0 .372
+(is supplied, the output is restricted to the POSIX)2.873 F F2(special)
+2.872 E F0 -.2(bu)2.872 G 2.872(iltins. The).2 F .372(return v)2.872 F
+.372(alue is)-.25 F 2.5(0u)144 645.6 S(nless a)-2.5 E F2(name)2.86 E F0
+(is not a shell b)2.68 E(uiltin or there is an error loading a ne)-.2 E
+2.5(wb)-.25 G(uiltin from a shared object.)-2.7 E F1 -2.3 -.15(ev a)108
+662.4 T(l).15 E F0([)2.5 E F2(ar)A(g)-.37 E F0(...])2.5 E(The)144 674.4
+Q F2(ar)3.17 E(g)-.37 E F0 3.17(sa)C .671
+(re read and concatenated together into a single command.)-3.17 F .671
+(This command is then read)5.671 F .479(and e)144 686.4 R -.15(xe)-.15 G
+.479(cuted by the shell, and its e).15 F .479
+(xit status is returned as the v)-.15 F .478(alue of)-.25 F F1 -2.3 -.15
+(ev a)2.978 H(l).15 E F0 5.478(.I)C 2.978(ft)-5.478 G .478(here are no)
+-2.978 F F2(ar)3.308 E(gs)-.37 E F0(,).27 E(or only null ar)144 698.4 Q
+(guments,)-.18 E F1 -2.3 -.15(ev a)2.5 H(l).15 E F0(returns 0.)2.5 E
+(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(63)190.395 E 0 Cg EP
+%%Page: 64 64
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(exec)108 84 Q F0([)2.5 E F1(\255cl)A F0 2.5(][)C F1<ad61>-2.5 E/F2 10
+/Times-Italic@0 SF(name)2.5 E F0 2.5(][)C F2(command)-2.5 E F0([)2.5 E
+F2(ar)A(guments)-.37 E F0(]])A(If)144 96 Q F2(command)3.005 E F0 .305
+(is speci\214ed, it replaces the shell.)3.575 F .305(No ne)5.305 F 2.805
+(wp)-.25 G .306(rocess is created.)-2.805 F(The)5.306 E F2(ar)3.136 E
+(guments)-.37 E F0(become)3.076 E .177(the ar)144 108 R .177(guments to)
+-.18 F F2(command)2.676 E F0 5.176(.I)C 2.676(ft)-5.176 G(he)-2.676 E F1
+<ad6c>2.676 E F0 .176
+(option is supplied, the shell places a dash at the be)2.676 F .176
+(ginning of)-.15 F .48(the zeroth ar)144 120 R .48(gument passed to)-.18
+F F2(command)3.18 E F0 5.48(.T).77 G .48(his is what)-5.48 F F2(lo)3.07
+E(gin)-.1 E F0 .48(\(1\) does.).24 F(The)5.48 E F1<ad63>2.98 E F0 .48
+(option causes)2.98 F F2(com-)3.18 E(mand)144 132 Q F0 .639(to be e)
+3.909 F -.15(xe)-.15 G .638(cuted with an empty en).15 F 3.138
+(vironment. If)-.4 F F1<ad61>3.138 E F0 .638
+(is supplied, the shell passes)3.138 F F2(name)3.498 E F0 .638(as the)
+3.318 F 1.077(zeroth ar)144 144 R 1.077(gument to the e)-.18 F -.15(xe)
+-.15 G 1.077(cuted command.).15 F(If)6.077 E F2(command)3.777 E F0 1.077
+(cannot be e)4.347 F -.15(xe)-.15 G 1.077(cuted for some reason, a).15 F
+(non-interacti)144 156 Q .877 -.15(ve s)-.25 H .577(hell e).15 F .577
+(xits, unless the)-.15 F F1(execfail)3.077 E F0 .577
+(shell option is enabled.)3.077 F .576(In that case, it returns f)5.577
+F(ail-)-.1 E 3.32(ure. An)144 168 R(interacti)3.32 E 1.12 -.15(ve s)-.25
+H .82(hell returns f).15 F .82(ailure if the \214le cannot be e)-.1 F
+-.15(xe)-.15 G 3.32(cuted. A).15 F .82(subshell e)3.32 F .82
+(xits uncondi-)-.15 F .288(tionally if)144 180 R F1(exec)2.788 E F0 -.1
+(fa)2.788 G 2.788(ils. If).1 F F2(command)2.988 E F0 .288
+(is not speci\214ed, an)3.558 F 2.787(yr)-.15 G .287(edirections tak)
+-2.787 F 2.787(ee)-.1 G -.25(ff)-2.787 G .287(ect in the current shell,)
+.25 F(and the return status is 0.)144 192 Q
+(If there is a redirection error)5 E 2.5(,t)-.4 G
+(he return status is 1.)-2.5 E F1(exit)108 208.8 Q F0([)2.5 E F2(n)A F0
+(])A .095(Cause the shell to e)144 208.8 R .095(xit with a status of)
+-.15 F F2(n)2.595 E F0 5.095(.I)C(f)-5.095 E F2(n)2.955 E F0 .096
+(is omitted, the e)2.835 F .096(xit status is that of the last command)
+-.15 F -.15(exe)144 220.8 S 2.5(cuted. A).15 F(trap on)2.5 E/F3 9
+/Times-Bold@0 SF(EXIT)2.5 E F0(is e)2.25 E -.15(xe)-.15 G
+(cuted before the shell terminates.).15 E F1(export)108 237.6 Q F0([)2.5
+E F1(\255fn)A F0 2.5(][).833 G F2(name)-2.5 E F0([=)A F2(wor)A(d)-.37 E
+F0(]] ...)A F1(export \255p)108 249.6 Q F0 .257(The supplied)144 261.6 R
+F2(names)3.117 E F0 .257(are mark)3.027 F .257(ed for automatic e)-.1 F
+.257(xport to the en)-.15 F .257(vironment of subsequently e)-.4 F -.15
+(xe)-.15 G(cuted).15 E 2.626(commands. If)144 273.6 R(the)2.626 E F1
+<ad66>2.626 E F0 .127(option is gi)2.627 F -.15(ve)-.25 G .127(n, the)
+.15 F F2(names)2.987 E F0 .127(refer to functions.)2.897 F .127(If no)
+5.127 F F2(names)2.987 E F0 .127(are gi)2.897 F -.15(ve)-.25 G .127
+(n, or if the).15 F F1<ad70>144 285.6 Q F0 .048
+(option is supplied, a list of names of all e)2.548 F .048(xported v)
+-.15 F .048(ariables is printed.)-.25 F(The)5.048 E F1<ad6e>2.547 E F0
+.047(option causes the)2.547 F -.15(ex)144 297.6 S 1.446
+(port property to be remo).15 F -.15(ve)-.15 G 3.947(df).15 G 1.447
+(rom each)-3.947 F F2(name)3.947 E F0 6.447(.I)C 3.947(fav)-6.447 G
+1.447(ariable name is follo)-4.197 F 1.447(wed by =)-.25 F F2(wor)A(d)
+-.37 E F0 3.947(,t)C(he)-3.947 E -.25(va)144 309.6 S .742(lue of the v)
+.25 F .742(ariable is set to)-.25 F F2(wor)3.242 E(d)-.37 E F0(.)A F1
+(export)5.742 E F0 .742(returns an e)3.242 F .741
+(xit status of 0 unless an in)-.15 F -.25(va)-.4 G .741(lid option is)
+.25 F .031(encountered, one of the)144 321.6 R F2(names)2.531 E F0 .031
+(is not a v)2.531 F .032(alid shell v)-.25 F .032(ariable name, or)-.25
+F F1<ad66>2.532 E F0 .032(is supplied with a)2.532 F F2(name)2.892 E F0
+(that)2.712 E(is not a function.)144 333.6 Q F1(fc)108 350.4 Q F0([)2.5
+E F1<ad65>A F2(ename)2.5 E F0 2.5(][)C F1(\255lnr)-2.5 E F0 2.5(][)C F2
+<8c72>-2.5 E(st)-.1 E F0 2.5(][)C F2(last)-2.5 E F0(])A F1(fc \255s)108
+362.4 Q F0([)2.5 E F2(pat)A F0(=)A F2 -.37(re)C(p).37 E F0 2.5(][)C F2
+(cmd)-2.5 E F0(])A .432
+(The \214rst form selects a range of commands from)144 374.4 R F2<8c72>
+4.842 E(st)-.1 E F0(to)3.612 E F2(last)3.022 E F0 .431
+(from the history list and displays or)3.612 F .141(edits and re-e)144
+386.4 R -.15(xe)-.15 G .141(cutes them.).15 F F2 -.45(Fi)5.141 G -.1(rs)
+.45 G(t).1 E F0(and)3.321 E F2(last)2.731 E F0 .141
+(may be speci\214ed as a string \(to locate the last command)3.321 F(be)
+144 398.4 Q .311(ginning with that string\) or as a number \(an inde)
+-.15 F 2.811(xi)-.15 G .31(nto the history list, where a ne)-2.811 F
+-.05(ga)-.15 G(ti).05 E .61 -.15(ve n)-.25 H(umber).15 E .071
+(is used as an of)144 410.4 R .071
+(fset from the current command number\).)-.25 F .071(When listing, a)
+5.071 F F2<8c72>2.571 E(st)-.1 E F0(or)2.571 E F2(last)2.571 E F0 .071
+(of 0 is equi)2.571 F -.25(va)-.25 G(-).25 E .653
+(lent to \2551 and \2550 is equi)144 422.4 R -.25(va)-.25 G .653
+(lent to the current command \(usually the).25 F F1(fc)3.153 E F0 .653
+(command\); otherwise 0 is)3.153 F(equi)144 434.4 Q -.25(va)-.25 G .242
+(lent to \2551 and \2550 is in).25 F -.25(va)-.4 G 2.742(lid. If).25 F
+F2(last)2.832 E F0 .242
+(is not speci\214ed, it is set to the current command for list-)3.422 F
+.093(ing \(so that)144 446.4 R/F4 10/Courier@0 SF .093(fc \255l \25510)
+2.593 F F0 .093(prints the last 10 commands\) and to)2.593 F F2<8c72>
+4.502 E(st)-.1 E F0 2.592(otherwise. If)3.272 F F2<8c72>4.502 E(st)-.1 E
+F0 .092(is not speci-)3.272 F(\214ed, it is set to the pre)144 458.4 Q
+(vious command for editing and \25516 for listing.)-.25 E(The)144 482.4
+Q F1<ad6e>2.522 E F0 .022
+(option suppresses the command numbers when listing.)2.522 F(The)5.022 E
+F1<ad72>2.522 E F0 .022(option re)2.522 F -.15(ve)-.25 G .022
+(rses the order of).15 F .438(the commands.)144 494.4 R .438(If the)
+5.438 F F1<ad6c>2.938 E F0 .438(option is gi)2.938 F -.15(ve)-.25 G .438
+(n, the commands are listed on standard output.).15 F(Otherwise,)5.438 E
+.334(the editor gi)144 506.4 R -.15(ve)-.25 G 2.834(nb).15 G(y)-2.834 E
+F2(ename)3.024 E F0 .335(is in)3.014 F -.2(vo)-.4 G -.1(ke).2 G 2.835
+(do).1 G 2.835(na\214)-2.835 G .335(le containing those commands.)-2.835
+F(If)5.335 E F2(ename)3.025 E F0 .335(is not gi)3.015 F -.15(ve)-.25 G
+(n,).15 E .631(the v)144 518.4 R .631(alue of the)-.25 F F3(FCEDIT)3.131
+E F0 -.25(va)2.881 G .631(riable is used, and the v).25 F .631(alue of)
+-.25 F F3(EDIT)3.131 E(OR)-.162 E F0(if)2.881 E F3(FCEDIT)3.13 E F0 .63
+(is not set.)2.88 F .63(If nei-)5.63 F .005(ther v)144 530.4 R .005
+(ariable is set,)-.25 F F2(vi)4.171 E F0 .005(is used.)4.171 F .005
+(When editing is complete, the edited commands are echoed and e)5.005 F
+(x-)-.15 E(ecuted.)144 542.4 Q .789(In the second form,)144 566.4 R F2
+(command)3.288 E F0 .788(is re-e)3.288 F -.15(xe)-.15 G .788
+(cuted after each instance of).15 F F2(pat)3.288 E F0 .788
+(is replaced by)3.288 F F2 -.37(re)3.288 G(p).37 E F0(.)A F2(Com-)5.788
+E(mand)144 578.4 Q F0 .171(is interpreted the same as)2.671 F F2<8c72>
+2.671 E(st)-.1 E F0(abo)2.671 E -.15(ve)-.15 G 5.171(.A).15 G .172
+(useful alias to use with this is)-2.499 F F4 .172(r='fc \255s')2.672 F
+F0 2.672(,s)C 2.672(ot)-2.672 G(hat)-2.672 E(typing)144 590.4 Q F4 7.166
+(rc)3.666 G(c)-7.166 E F0 1.166(runs the last command be)3.666 F 1.166
+(ginning with)-.15 F F4(cc)3.666 E F0 1.165(and typing)3.666 F F4(r)
+3.665 E F0(re-e)3.665 E -.15(xe)-.15 G 1.165(cutes the last com-).15 F
+(mand.)144 602.4 Q .142(If the \214rst form is used, the return v)144
+626.4 R .142(alue is 0 unless an in)-.25 F -.25(va)-.4 G .142
+(lid option is encountered or).25 F F2<8c72>4.552 E(st)-.1 E F0(or)3.322
+E F2(last)2.732 E F0 .455(specify history lines out of range.)144 638.4
+R .454(If the)5.454 F F1<ad65>2.954 E F0 .454
+(option is supplied, the return v)2.954 F .454(alue is the v)-.25 F .454
+(alue of the)-.25 F .787(last command e)144 650.4 R -.15(xe)-.15 G .787
+(cuted or f).15 F .788
+(ailure if an error occurs with the temporary \214le of commands.)-.1 F
+.788(If the)5.788 F 1.136
+(second form is used, the return status is that of the command re-e)144
+662.4 R -.15(xe)-.15 G 1.135(cuted, unless).15 F F2(cmd)3.835 E F0 1.135
+(does not)4.405 F(specify a v)144 674.4 Q
+(alid history line, in which case)-.25 E F1(fc)2.5 E F0(returns f)2.5 E
+(ailure.)-.1 E F1(fg)108 691.2 Q F0([)2.5 E F2(jobspec)A F0(])A(Resume)
+144 703.2 Q F2(jobspec)5.653 E F0 1.413(in the fore)4.223 F 1.413
+(ground, and mak)-.15 F 3.913(ei)-.1 G 3.913(tt)-3.913 G 1.413
+(he current job)-3.913 F 6.413(.I)-.4 G(f)-6.413 E F2(jobspec)5.653 E F0
+1.414(is not present, the)4.223 F(shell')144 715.2 Q 3.117(sn)-.55 G
+.617(otion of the)-3.117 F F2(curr)3.117 E .617(ent job)-.37 F F0 .617
+(is used.)3.117 F .617(The return v)5.617 F .616
+(alue is that of the command placed into the)-.25 F(fore)144 727.2 Q
+.362(ground, or f)-.15 F .362
+(ailure if run when job control is disabled or)-.1 F 2.862(,w)-.4 G .363
+(hen run with job control enabled, if)-2.862 F(GNU Bash 5.1)72 768 Q
+(2020 October 29)141.235 E(64)190.395 E 0 Cg EP
+%%Page: 65 65
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10
+/Times-Italic@0 SF(jobspec)145.74 84 Q F0(does not specify a v)2.81 E
+(alid job or)-.25 E F1(jobspec)4.24 E F0(speci\214es a job that w)2.81 E
+(as started without job control.)-.1 E/F2 10/Times-Bold@0 SF(getopts)108
+100.8 Q F1(optstring name)2.5 E F0([)2.5 E F1(ar)A 2.5(g.)-.37 G(..)-2.5
+E F0(])A F2(getopts)144 112.8 Q F0 .793
+(is used by shell procedures to parse positional parameters.)3.294 F F1
+(optstring)6.023 E F0 .793(contains the option)3.513 F .149
+(characters to be recognized; if a character is follo)144 124.8 R .15
+(wed by a colon, the option is e)-.25 F .15(xpected to ha)-.15 F .45
+-.15(ve a)-.2 H(n).15 E(ar)144 136.8 Q .579
+(gument, which should be separated from it by white space.)-.18 F .578
+(The colon and question mark char)5.579 F(-)-.2 E .636
+(acters may not be used as option characters.)144 148.8 R .636
+(Each time it is in)5.636 F -.2(vo)-.4 G -.1(ke).2 G(d,).1 E F2(getopts)
+3.136 E F0 .636(places the ne)3.136 F .636(xt op-)-.15 F .03
+(tion in the shell v)144 160.8 R(ariable)-.25 E F1(name)2.89 E F0 2.53
+(,i).18 G(nitializing)-2.53 E F1(name)2.89 E F0 .029(if it does not e)
+2.71 F .029(xist, and the inde)-.15 F 2.529(xo)-.15 G 2.529(ft)-2.529 G
+.029(he ne)-2.529 F .029(xt ar)-.15 F(gu-)-.18 E .065
+(ment to be processed into the v)144 172.8 R(ariable)-.25 E/F3 9
+/Times-Bold@0 SF(OPTIND)2.565 E/F4 9/Times-Roman@0 SF(.)A F3(OPTIND)
+4.565 E F0 .066(is initialized to 1 each time the shell or a)2.315 F
+.885(shell script is in)144 184.8 R -.2(vo)-.4 G -.1(ke).2 G 3.385
+(d. When).1 F .885(an option requires an ar)3.385 F(gument,)-.18 E F2
+(getopts)3.385 E F0 .885(places that ar)3.385 F .885(gument into)-.18 F
+.566(the v)144 196.8 R(ariable)-.25 E F3(OPT)3.066 E(ARG)-.81 E F4(.)A
+F0 .566(The shell does not reset)5.066 F F3(OPTIND)3.066 E F0 .567
+(automatically; it must be manually reset)2.816 F .39
+(between multiple calls to)144 208.8 R F2(getopts)2.89 E F0 .39
+(within the same shell in)2.89 F -.2(vo)-.4 G .389(cation if a ne).2 F
+2.889(ws)-.25 G .389(et of parameters is to)-2.889 F(be used.)144 220.8
+Q 2.043(When the end of options is encountered,)144 244.8 R F2(getopts)
+4.543 E F0 -.15(ex)4.543 G 2.043(its with a return v).15 F 2.044
+(alue greater than zero.)-.25 F F3(OPTIND)144 256.8 Q F0
+(is set to the inde)2.25 E 2.5(xo)-.15 G 2.5(ft)-2.5 G
+(he \214rst non-option ar)-2.5 E(gument, and)-.18 E F1(name)2.5 E F0
+(is set to ?.)2.5 E F2(getopts)144 280.8 Q F0 .485
+(normally parses the positional parameters, b)2.985 F .485
+(ut if more ar)-.2 F .485(guments are supplied as)-.18 F F1(ar)3.315 E
+(g)-.37 E F0 -.25(va)3.205 G(l-).25 E(ues,)144 292.8 Q F2(getopts)2.5 E
+F0(parses those instead.)2.5 E F2(getopts)144 316.8 Q F0 .345
+(can report errors in tw)2.845 F 2.845(ow)-.1 G 2.845(ays. If)-2.945 F
+.345(the \214rst character of)2.845 F F1(optstring)3.075 E F0 .345
+(is a colon,)3.065 F F1(silent)3.185 E F0 .345(error re-)3.525 F 1.669
+(porting is used.)144 328.8 R 1.668
+(In normal operation, diagnostic messages are printed when in)6.669 F
+-.25(va)-.4 G 1.668(lid options or).25 F .393(missing option ar)144
+340.8 R .393(guments are encountered.)-.18 F .394(If the v)5.394 F
+(ariable)-.25 E F3(OPTERR)2.894 E F0 .394
+(is set to 0, no error messages)2.644 F(will be displayed, e)144 352.8 Q
+-.15(ve)-.25 G 2.5(ni).15 G 2.5(ft)-2.5 G(he \214rst character of)-2.5 E
+F1(optstring)2.73 E F0(is not a colon.)2.72 E .667(If an in)144 376.8 R
+-.25(va)-.4 G .667(lid option is seen,).25 F F2(getopts)3.167 E F0 .667
+(places ? into)3.167 F F1(name)3.527 E F0 .666
+(and, if not silent, prints an error message)3.347 F .399(and unsets)144
+388.8 R F3(OPT)2.899 E(ARG)-.81 E F4(.)A F0(If)4.899 E F2(getopts)2.899
+E F0 .399(is silent, the option character found is placed in)2.899 F F3
+(OPT)2.899 E(ARG)-.81 E F0 .4(and no)2.65 F
+(diagnostic message is printed.)144 400.8 Q 1.242(If a required ar)144
+424.8 R 1.242(gument is not found, and)-.18 F F2(getopts)3.741 E F0
+1.241(is not silent, a question mark \()3.741 F F2(?).833 E F0 3.741
+(\)i).833 G 3.741(sp)-3.741 G 1.241(laced in)-3.741 F F1(name)144.36
+436.8 Q F0(,).18 E F3(OPT)2.713 E(ARG)-.81 E F0 .213
+(is unset, and a diagnostic message is printed.)2.463 F(If)5.213 E F2
+(getopts)2.713 E F0 .213(is silent, then a colon \()2.713 F F2(:).833 E
+F0(\)).833 E(is placed in)144 448.8 Q F1(name)2.86 E F0(and)2.68 E F3
+(OPT)2.5 E(ARG)-.81 E F0(is set to the option character found.)2.25 E F2
+(getopts)144 472.8 Q F0 .902
+(returns true if an option, speci\214ed or unspeci\214ed, is found.)
+3.402 F .902(It returns f)5.902 F .901(alse if the end of)-.1 F
+(options is encountered or an error occurs.)144 484.8 Q F2(hash)108
+501.6 Q F0([)2.5 E F2(\255lr)A F0 2.5(][)C F2<ad70>-2.5 E F1(\214lename)
+2.5 E F0 2.5(][)C F2(\255dt)-2.5 E F0 2.5(][)C F1(name)-2.5 E F0(])A
+.858(Each time)144 513.6 R F2(hash)3.358 E F0 .858(is in)3.358 F -.2(vo)
+-.4 G -.1(ke).2 G .858(d, the full pathname of the command).1 F F1(name)
+3.718 E F0 .858(is determined by searching)3.538 F .956
+(the directories in)144 525.6 R F2($P)3.456 E -.95(AT)-.74 G(H).95 E F0
+.956(and remembered.)3.456 F(An)5.956 E 3.456(yp)-.15 G(re)-3.456 E .956
+(viously-remembered pathname is discarded.)-.25 F .242(If the)144 537.6
+R F2<ad70>2.742 E F0 .243
+(option is supplied, no path search is performed, and)2.742 F F1
+(\214lename)4.653 E F0 .243(is used as the full \214lename)2.923 F .615
+(of the command.)144 549.6 R(The)5.615 E F2<ad72>3.115 E F0 .615
+(option causes the shell to for)3.115 F .615
+(get all remembered locations.)-.18 F(The)5.615 E F2<ad64>3.115 E F0
+(op-)3.115 E .293(tion causes the shell to for)144 561.6 R .293
+(get the remembered location of each)-.18 F F1(name)2.794 E F0 5.294(.I)
+C 2.794(ft)-5.294 G(he)-2.794 E F2<ad74>2.794 E F0 .294
+(option is supplied,)2.794 F .028(the full pathname to which each)144
+573.6 R F1(name)2.528 E F0 .028(corresponds is printed.)2.528 F .028
+(If multiple)5.028 F F1(name)2.528 E F0(ar)2.528 E .028
+(guments are sup-)-.18 F .175(plied with)144 585.6 R F2<ad74>2.675 E F0
+2.675(,t)C(he)-2.675 E F1(name)2.675 E F0 .175
+(is printed before the hashed full pathname.)2.675 F(The)5.175 E F2
+<ad6c>2.676 E F0 .176(option causes output to)2.676 F .783
+(be displayed in a format that may be reused as input.)144 597.6 R .783
+(If no ar)5.783 F .783(guments are gi)-.18 F -.15(ve)-.25 G .783
+(n, or if only).15 F F2<ad6c>3.283 E F0(is)3.283 E .807
+(supplied, information about remembered commands is printed.)144 609.6 R
+.807(The return status is true unless a)5.807 F F1(name)144.36 621.6 Q
+F0(is not found or an in)2.68 E -.25(va)-.4 G(lid option is supplied.)
+.25 E F2(help)108 638.4 Q F0([)2.5 E F2(\255dms)A F0 2.5(][)C F1
+(pattern)-2.5 E F0(])A .867(Display helpful information about b)144
+650.4 R .867(uiltin commands.)-.2 F(If)5.867 E F1(pattern)4.617 E F0
+.866(is speci\214ed,)3.607 F F2(help)3.366 E F0(gi)3.366 E -.15(ve)-.25
+G 3.366(sd).15 G(etailed)-3.366 E .223(help on all commands matching)144
+662.4 R F1(pattern)3.973 E F0 2.723(;o).24 G .223
+(therwise help for all the b)-2.723 F .224
+(uiltins and shell control struc-)-.2 F(tures is printed.)144 674.4 Q F2
+<ad64>144 686.4 Q F0(Display a short description of each)180 686.4 Q F1
+(pattern)2.5 E F2<ad6d>144 698.4 Q F0(Display the description of each)
+180 698.4 Q F1(pattern)2.5 E F0(in a manpage-lik)2.5 E 2.5(ef)-.1 G
+(ormat)-2.5 E F2<ad73>144 710.4 Q F0
+(Display only a short usage synopsis for each)180 710.4 Q F1(pattern)2.5
+E F0(The return status is 0 unless no command matches)144 727.2 Q F1
+(pattern)3.75 E F0(.).24 E(GNU Bash 5.1)72 768 Q(2020 October 29)141.235
+E(65)190.395 E 0 Cg EP
+%%Page: 66 66
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(history [)108 84 Q/F2 10/Times-Italic@0 SF(n)A F1(])A(history \255c)
+108 96 Q(history \255d)108 108 Q F2(of)2.5 E(fset)-.18 E F1
+(history \255d)108 120 Q F2(start)2.5 E F0<ad>A F2(end)A F1
+(history \255anrw)108 132 Q F0([)2.5 E F2(\214lename)A F0(])A F1
+(history \255p)108 144 Q F2(ar)2.5 E(g)-.37 E F0([)2.5 E F2(ar)A 2.5(g.)
+-.37 G(..)-2.5 E F0(])A F1(history \255s)108 156 Q F2(ar)2.5 E(g)-.37 E
+F0([)2.5 E F2(ar)A 2.5(g.)-.37 G(..)-2.5 E F0(])A -.4(Wi)144 168 S .752
+(th no options, display the command history list with line numbers.).4 F
+.752(Lines listed with a)5.752 F F1(*)3.251 E F0(ha)3.251 E -.15(ve)-.2
+G .38(been modi\214ed.)144 180 R .38(An ar)5.38 F .38(gument of)-.18 F
+F2(n)3.24 E F0 .38(lists only the last)3.12 F F2(n)3.24 E F0 2.88
+(lines. If)3.12 F .38(the shell v)2.88 F(ariable)-.25 E/F3 9
+/Times-Bold@0 SF(HISTTIMEFOR-)2.881 E(MA)144 192 Q(T)-.855 E F0 .265
+(is set and not null, it is used as a format string for)2.515 F F2
+(strftime)2.764 E F0 .264(\(3\) to display the time stamp asso-)B 1.019
+(ciated with each displayed history entry)144 204 R 6.019(.N)-.65 G
+3.519(oi)-6.019 G(nterv)-3.519 E 1.019
+(ening blank is printed between the formatted)-.15 F .176
+(time stamp and the history line.)144 216 R(If)5.176 E F2(\214lename)
+2.676 E F0 .176
+(is supplied, it is used as the name of the history \214le; if)2.676 F
+(not, the v)144 228 Q(alue of)-.25 E F3(HISTFILE)2.5 E F0(is used.)2.25
+E(Options, if supplied, ha)5 E .3 -.15(ve t)-.2 H(he follo).15 E
+(wing meanings:)-.25 E F1<ad63>144 240 Q F0
+(Clear the history list by deleting all the entries.)180 240 Q F1<ad64>
+144 252 Q F2(of)2.5 E(fset)-.18 E F0 .389
+(Delete the history entry at position)180 264 R F2(of)2.889 E(fset)-.18
+E F0 5.389(.I)C(f)-5.389 E F2(of)2.889 E(fset)-.18 E F0 .389(is ne)2.889
+F -.05(ga)-.15 G(ti).05 E -.15(ve)-.25 G 2.89(,i).15 G 2.89(ti)-2.89 G
+2.89(si)-2.89 G .39(nterpreted as relati)-2.89 F -.15(ve)-.25 G .599
+(to one greater than the last history position, so ne)180 276 R -.05(ga)
+-.15 G(ti).05 E .899 -.15(ve i)-.25 H .598
+(ndices count back from the end).15 F(of the history)180 288 Q 2.5(,a)
+-.65 G(nd an inde)-2.5 E 2.5(xo)-.15 G 2.5<66ad>-2.5 G 2.5(1r)-2.5 G
+(efers to the current)-2.5 E F1(history -d)2.5 E F0(command.)2.5 E F1
+<ad64>144 300 Q F2(start)2.5 E F0<ad>A F2(end)A F0 .757
+(Delete the history entries between positions)180 312 R F2(start)3.257 E
+F0(and)3.258 E F2(end)3.258 E F0 3.258(,i)C(nclusi)-3.258 E -.15(ve)-.25
+G 5.758(.P).15 G(ositi)-5.758 E 1.058 -.15(ve a)-.25 H .758(nd ne).15 F
+-.05(ga)-.15 G(-).05 E(ti)180 324 Q .3 -.15(ve v)-.25 H(alues for)-.1 E
+F2(start)2.5 E F0(and)2.5 E F2(end)2.5 E F0
+(are interpreted as described abo)2.5 E -.15(ve)-.15 G(.).15 E F1<ad61>
+144 336 Q F0 .565(Append the `)180 336 R(`ne)-.74 E(w')-.25 E 3.065('h)
+-.74 G .564(istory lines to the history \214le.)-3.065 F .564
+(These are history lines entered since)5.564 F(the be)180 348 Q
+(ginning of the current)-.15 E F1(bash)2.5 E F0(session, b)2.5 E
+(ut not already appended to the history \214le.)-.2 E F1<ad6e>144 360 Q
+F0 .854(Read the history lines not already read from the history \214le\
+ into the current history list.)180 360 R .773
+(These are lines appended to the history \214le since the be)180 372 R
+.772(ginning of the current)-.15 F F1(bash)3.272 E F0(ses-)3.272 E
+(sion.)180 384 Q F1<ad72>144 396 Q F0(Read the contents of the history \
+\214le and append them to the current history list.)180 396 Q F1<ad77>
+144 408 Q F0(Write the current history list to the history \214le, o)180
+408 Q -.15(ve)-.15 G(rwriting the history \214le').15 E 2.5(sc)-.55 G
+(ontents.)-2.5 E F1<ad70>144 420 Q F0 .625
+(Perform history substitution on the follo)180 420 R(wing)-.25 E F2(ar)
+3.125 E(gs)-.37 E F0 .626(and display the result on the standard)3.125 F
+2.975(output. Does)180 432 R .475
+(not store the results in the history list.)2.975 F(Each)5.475 E F2(ar)
+2.975 E(g)-.37 E F0 .475(must be quoted to disable)2.975 F
+(normal history e)180 444 Q(xpansion.)-.15 E F1<ad73>144 456 Q F0 .362
+(Store the)180 456 R F2(ar)3.192 E(gs)-.37 E F0 .363
+(in the history list as a single entry)3.132 F 5.363(.T)-.65 G .363
+(he last command in the history list is)-5.363 F(remo)180 468 Q -.15(ve)
+-.15 G 2.5(db).15 G(efore the)-2.5 E F2(ar)2.83 E(gs)-.37 E F0
+(are added.)2.77 E .146(If the)144 484.8 R F3(HISTTIMEFORMA)2.645 E(T)
+-.855 E F0 -.25(va)2.395 G .145
+(riable is set, the time stamp information associated with each history)
+.25 F .668(entry is written to the history \214le, mark)144 496.8 R .669
+(ed with the history comment character)-.1 F 5.669(.W)-.55 G .669
+(hen the history)-5.669 F .956(\214le is read, lines be)144 508.8 R .956
+(ginning with the history comment character follo)-.15 F .955
+(wed immediately by a digit)-.25 F .832
+(are interpreted as timestamps for the follo)144 520.8 R .832
+(wing history entry)-.25 F 5.833(.T)-.65 G .833(he return v)-5.833 F
+.833(alue is 0 unless an in-)-.25 F -.25(va)144 532.8 S .168(lid option\
+ is encountered, an error occurs while reading or writing the history \
+\214le, an in).25 F -.25(va)-.4 G(lid).25 E F2(of)2.668 E(f-)-.18 E(set)
+144 544.8 Q F0(is supplied as an ar)2.5 E(gument to)-.18 E F1<ad64>2.5 E
+F0 2.5(,o)C 2.5(rt)-2.5 G(he history e)-2.5 E
+(xpansion supplied as an ar)-.15 E(gument to)-.18 E F1<ad70>2.5 E F0 -.1
+(fa)2.5 G(ils.).1 E F1(jobs)108 561.6 Q F0([)2.5 E F1(\255lnprs)A F0 2.5
+(][)C F2(jobspec)A F0(... ])2.5 E F1(jobs \255x)108 573.6 Q F2(command)
+2.5 E F0([)2.5 E F2(ar)2.5 E(gs)-.37 E F0(... ])2.5 E
+(The \214rst form lists the acti)144 585.6 Q .3 -.15(ve j)-.25 H 2.5
+(obs. The).15 F(options ha)2.5 E .3 -.15(ve t)-.2 H(he follo).15 E
+(wing meanings:)-.25 E F1<ad6c>144 597.6 Q F0
+(List process IDs in addition to the normal information.)180 597.6 Q F1
+<ad6e>144 609.6 Q F0 .193(Display information only about jobs that ha)
+180 609.6 R .494 -.15(ve c)-.2 H .194(hanged status since the user w).15
+F .194(as last noti-)-.1 F(\214ed of their status.)180 621.6 Q F1<ad70>
+144 633.6 Q F0(List only the process ID of the job')180 633.6 Q 2.5(sp)
+-.55 G(rocess group leader)-2.5 E(.)-.55 E F1<ad72>144 645.6 Q F0
+(Display only running jobs.)180 645.6 Q F1<ad73>144 657.6 Q F0
+(Display only stopped jobs.)180 657.6 Q(If)144 674.4 Q F2(jobspec)4.554
+E F0 .314(is gi)3.124 F -.15(ve)-.25 G .314
+(n, output is restricted to information about that job).15 F 5.313(.T)
+-.4 G .313(he return status is 0 unless)-5.313 F(an in)144 686.4 Q -.25
+(va)-.4 G(lid option is encountered or an in).25 E -.25(va)-.4 G(lid).25
+E F2(jobspec)4.24 E F0(is supplied.)2.81 E .394(If the)144 703.2 R F1
+<ad78>2.894 E F0 .394(option is supplied,)2.894 F F1(jobs)2.894 E F0
+.394(replaces an)2.894 F(y)-.15 E F2(jobspec)4.634 E F0 .394(found in)
+3.204 F F2(command)3.094 E F0(or)3.664 E F2(ar)3.224 E(gs)-.37 E F0 .395
+(with the corre-)3.164 F(sponding process group ID, and e)144 715.2 Q
+-.15(xe)-.15 G(cutes).15 E F2(command)2.7 E F0(passing it)3.27 E F2(ar)
+2.83 E(gs)-.37 E F0 2.5(,r).27 G(eturning its e)-2.5 E(xit status.)-.15
+E(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(66)190.395 E 0 Cg EP
+%%Page: 67 67
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(kill)108 84 Q F0([)2.5 E F1<ad73>A/F2 10/Times-Italic@0 SF(sigspec)
+2.5 E F0(|)2.5 E F1<ad6e>2.5 E F2(signum)2.5 E F0(|)2.5 E F1<ad>2.5 E F2
+(sigspec)A F0 2.5(][)C F2(pid)-2.5 E F0(|)2.5 E F2(jobspec)2.5 E F0 2.5
+(].)C(..)-2.5 E F1(kill \255l)108 96 Q F0(|)A F1<ad4c>A F0([)2.5 E F2
+(sigspec)A F0(|)2.5 E F2 -.2(ex)2.5 G(it_status).2 E F0(])A .017
+(Send the signal named by)144 108 R F2(sigspec)2.857 E F0(or)2.827 E F2
+(signum)2.857 E F0 .017(to the processes named by)2.837 F F2(pid)3.767 E
+F0(or)3.287 E F2(jobspec)4.257 E F0(.).31 E F2(sigspec)5.357 E F0(is)
+2.827 E .318(either a case-insensiti)144 120 R .618 -.15(ve s)-.25 H
+.318(ignal name such as).15 F/F3 9/Times-Bold@0 SF(SIGKILL)2.818 E F0
+.319(\(with or without the)2.569 F F3(SIG)2.819 E F0 .319
+(pre\214x\) or a signal)2.569 F(number;)144 132 Q F2(signum)3.268 E F0
+.427(is a signal number)3.247 F 5.427(.I)-.55 G(f)-5.427 E F2(sigspec)
+3.267 E F0 .427(is not present, then)3.237 F F3(SIGTERM)2.927 E F0 .427
+(is assumed.)2.677 F .427(An ar)5.427 F(-)-.2 E .313(gument of)144 144 R
+F1<ad6c>2.813 E F0 .314(lists the signal names.)2.814 F .314(If an)5.314
+F 2.814(ya)-.15 G -.18(rg)-2.814 G .314(uments are supplied when).18 F
+F1<ad6c>2.814 E F0 .314(is gi)2.814 F -.15(ve)-.25 G .314
+(n, the names of).15 F .12(the signals corresponding to the ar)144 156 R
+.119(guments are listed, and the return status is 0.)-.18 F(The)5.119 E
+F2 -.2(ex)2.619 G(it_status).2 E F0(ar)2.619 E(-)-.2 E .799(gument to)
+144 168 R F1<ad6c>3.299 E F0 .799
+(is a number specifying either a signal number or the e)3.299 F .8
+(xit status of a process termi-)-.15 F .963(nated by a signal.)144 180 R
+(The)5.962 E F1<ad4c>3.462 E F0 .962(option is equi)3.462 F -.25(va)-.25
+G .962(lent to).25 F F1<ad6c>3.462 E F0(.)A F1(kill)5.962 E F0 .962
+(returns true if at least one signal w)3.462 F(as)-.1 E
+(successfully sent, or f)144 192 Q(alse if an error occurs or an in)-.1
+E -.25(va)-.4 G(lid option is encountered.).25 E F1(let)108 208.8 Q F2
+(ar)2.5 E(g)-.37 E F0([)2.5 E F2(ar)A(g)-.37 E F0(...])2.5 E(Each)144
+220.8 Q F2(ar)3.026 E(g)-.37 E F0 .196(is an arithmetic e)2.916 F .197
+(xpression to be e)-.15 F -.25(va)-.25 G .197(luated \(see).25 F F3 .197
+(ARITHMETIC EV)2.697 F(ALU)-1.215 E -.855(AT)-.54 G(ION).855 E F0(abo)
+2.447 E -.15(ve)-.15 G 2.697(\). If).15 F(the last)144 232.8 Q F2(ar)
+2.83 E(g)-.37 E F0 -.25(eva)2.72 G(luates to 0,).25 E F1(let)2.5 E F0
+(returns 1; 0 is returned otherwise.)2.5 E F1(local)108 249.6 Q F0([)2.5
+E F2(option)A F0 2.5(][)C F2(name)-2.5 E F0([=)A F2(value)A F0 2.5(].)C
+(.. | \255 ])-2.5 E -.15(Fo)144 261.6 S 2.542(re).15 G .042(ach ar)
+-2.542 F .042(gument, a local v)-.18 F .042(ariable named)-.25 F F2
+(name)2.902 E F0 .042(is created, and assigned)2.722 F F2(value)2.832 E
+F0 5.042(.T).18 G(he)-5.042 E F2(option)2.542 E F0 .041(can be)2.541 F
+(an)144 273.6 Q 3.152(yo)-.15 G 3.152(ft)-3.152 G .652
+(he options accepted by)-3.152 F F1(declar)3.152 E(e)-.18 E F0 5.652(.W)
+C(hen)-5.652 E F1(local)3.152 E F0 .653
+(is used within a function, it causes the v)3.152 F(ari-)-.25 E(able)144
+285.6 Q F2(name)3.282 E F0 .422(to ha)3.102 F .722 -.15(ve a v)-.2 H
+.422(isible scope restricted to that function and its children.).15 F
+(If)5.421 E F2(name)2.921 E F0 .421(is \255, the set)2.921 F .509
+(of shell options is made local to the function in which)144 297.6 R F1
+(local)3.01 E F0 .51(is in)3.01 F -.2(vo)-.4 G -.1(ke).2 G .51
+(d: shell options changed us-).1 F 1.171(ing the)144 309.6 R F1(set)
+3.671 E F0 -.2(bu)3.671 G 1.171
+(iltin inside the function are restored to their original v).2 F 1.17
+(alues when the function re-)-.25 F 3.38(turns. The)144 321.6 R .88
+(restore is ef)3.38 F .88(fected as if a series of)-.25 F F1(set)3.381 E
+F0 .881(commands were e)3.381 F -.15(xe)-.15 G .881
+(cuted to restore the v).15 F(alues)-.25 E .788
+(that were in place before the function.)144 333.6 R -.4(Wi)5.788 G .788
+(th no operands,).4 F F1(local)3.288 E F0 .787(writes a list of local v)
+3.288 F .787(ariables to)-.25 F .654(the standard output.)144 345.6 R
+.654(It is an error to use)5.654 F F1(local)3.154 E F0 .654
+(when not within a function.)3.154 F .655(The return status is 0)5.654 F
+(unless)144 357.6 Q F1(local)2.5 E F0(is used outside a function, an in)
+2.5 E -.25(va)-.4 G(lid).25 E F2(name)2.86 E F0(is supplied, or)2.68 E
+F2(name)2.5 E F0(is a readonly v)2.5 E(ariable.)-.25 E F1(logout)108
+374.4 Q F0(Exit a login shell.)144 374.4 Q F1(map\214le)108 391.2 Q F0
+([)2.5 E F1<ad64>A F2(delim)2.5 E F0 2.5(][)C F1<ad6e>-2.5 E F2(count)
+2.5 E F0 2.5(][)C F1<ad4f>-2.5 E F2(origin)2.5 E F0 2.5(][)C F1<ad73>
+-2.5 E F2(count)2.5 E F0 2.5(][)C F1<ad74>-2.5 E F0 2.5(][)C F1<ad75>
+-2.5 E F2(fd)2.5 E F0 2.5(][)C F1<ad43>-2.5 E F2(callbac)2.5 E(k)-.2 E
+F0 2.5(][)C F1<ad63>-2.5 E F2(quantum)2.5 E F0 2.5(][)C F2(arr)-2.5 E
+(ay)-.15 E F0(])A F1 -.18(re)108 403.2 S(adarray).18 E F0([)2.5 E F1
+<ad64>A F2(delim)2.5 E F0 2.5(][)C F1<ad6e>-2.5 E F2(count)2.5 E F0 2.5
+(][)C F1<ad4f>-2.5 E F2(origin)2.5 E F0 2.5(][)C F1<ad73>-2.5 E F2
+(count)2.5 E F0 2.5(][)C F1<ad74>-2.5 E F0 2.5(][)C F1<ad75>-2.5 E F2
+(fd)2.5 E F0 2.5(][)C F1<ad43>-2.5 E F2(callbac)2.5 E(k)-.2 E F0 2.5(][)
+C F1<ad63>-2.5 E F2(quantum)2.5 E F0 2.5(][)C F2(arr)-2.5 E(ay)-.15 E F0
+(])A .159(Read lines from the standard input into the inde)144 415.2 R
+-.15(xe)-.15 G 2.659(da).15 G .159(rray v)-2.659 F(ariable)-.25 E F2
+(arr)2.989 E(ay)-.15 E F0 2.659(,o).32 G 2.658(rf)-2.659 G .158
+(rom \214le descriptor)-2.658 F F2(fd)4.628 E F0 1.248(if the)144 427.2
+R F1<ad75>3.748 E F0 1.248(option is supplied.)3.748 F 1.249(The v)6.249
+F(ariable)-.25 E F3(MAPFILE)3.749 E F0 1.249(is the def)3.499 F(ault)-.1
+E F2(arr)3.749 E(ay)-.15 E F0 6.249(.O)C 1.249(ptions, if supplied,)
+-6.249 F(ha)144 439.2 Q .3 -.15(ve t)-.2 H(he follo).15 E
+(wing meanings:)-.25 E F1<ad64>144 451.2 Q F0 .911
+(The \214rst character of)180 451.2 R F2(delim)3.411 E F0 .911
+(is used to terminate each input line, rather than ne)3.411 F 3.41
+(wline. If)-.25 F F2(delim)180 463.2 Q F0(is the empty string,)2.5 E F1
+(map\214le)2.5 E F0(will terminate a line when it reads a NUL character)
+2.5 E(.)-.55 E F1<ad6e>144 475.2 Q F0(Cop)180 475.2 Q 2.5(ya)-.1 G 2.5
+(tm)-2.5 G(ost)-2.5 E F2(count)2.7 E F0 2.5(lines. If)3.18 F F2(count)
+2.5 E F0(is 0, all lines are copied.)2.5 E F1<ad4f>144 487.2 Q F0(Be)180
+487.2 Q(gin assigning to)-.15 E F2(arr)2.83 E(ay)-.15 E F0(at inde)2.82
+E(x)-.15 E F2(origin)2.73 E F0 5(.T).24 G(he def)-5 E(ault inde)-.1 E
+2.5(xi)-.15 G 2.5(s0)-2.5 G(.)-2.5 E F1<ad73>144 499.2 Q F0
+(Discard the \214rst)180 499.2 Q F2(count)2.5 E F0(lines read.)2.5 E F1
+<ad74>144 511.2 Q F0(Remo)180 511.2 Q .3 -.15(ve a t)-.15 H(railing).15
+E F2(delim)2.5 E F0(\(def)2.5 E(ault ne)-.1 E
+(wline\) from each line read.)-.25 E F1<ad75>144 523.2 Q F0
+(Read lines from \214le descriptor)180 523.2 Q F2(fd)2.5 E F0
+(instead of the standard input.)2.5 E F1<ad43>144 535.2 Q F0(Ev)180
+535.2 Q(aluate)-.25 E F2(callbac)2.7 E(k)-.2 E F0(each time)3.17 E F2
+(quantum)2.5 E F0(lines are read.)2.5 E(The)5 E F1<ad63>2.5 E F0
+(option speci\214es)2.5 E F2(quantum)2.75 E F0(.).32 E F1<ad63>144 547.2
+Q F0(Specify the number of lines read between each call to)180 547.2 Q
+F2(callbac)2.7 E(k)-.2 E F0(.).67 E(If)144 564 Q F1<ad43>2.967 E F0 .467
+(is speci\214ed without)2.967 F F1<ad63>2.967 E F0 2.967(,t)C .467
+(he def)-2.967 F .467(ault quantum is 5000.)-.1 F(When)5.467 E F2
+(callbac)2.967 E(k)-.2 E F0 .467(is e)2.967 F -.25(va)-.25 G .467
+(luated, it is sup-).25 F .262(plied the inde)144 576 R 2.762(xo)-.15 G
+2.762(ft)-2.762 G .262(he ne)-2.762 F .261(xt array element to be assig\
+ned and the line to be assigned to that element)-.15 F .274
+(as additional ar)144 588 R(guments.)-.18 E F2(callbac)5.274 E(k)-.2 E
+F0 .274(is e)2.774 F -.25(va)-.25 G .274
+(luated after the line is read b).25 F .275
+(ut before the array element is)-.2 F(assigned.)144 600 Q
+(If not supplied with an e)144 616.8 Q(xplicit origin,)-.15 E F1
+(map\214le)2.5 E F0(will clear)2.5 E F2(arr)2.5 E(ay)-.15 E F0
+(before assigning to it.)2.5 E F1(map\214le)144 633.6 Q F0 .797
+(returns successfully unless an in)3.298 F -.25(va)-.4 G .797
+(lid option or option ar).25 F .797(gument is supplied,)-.18 F F2(arr)
+3.297 E(ay)-.15 E F0 .797(is in-)3.297 F -.25(va)144 645.6 S
+(lid or unassignable, or if).25 E F2(arr)2.5 E(ay)-.15 E F0
+(is not an inde)2.5 E -.15(xe)-.15 G 2.5(da).15 G(rray)-2.5 E(.)-.65 E
+F1(popd)108 662.4 Q F0<5bad>2.5 E F1(n)A F0 2.5(][)C(+)-2.5 E F2(n)A F0
+2.5(][)C<ad>-2.5 E F2(n)A F0(])A(Remo)144 674.4 Q -.15(ve)-.15 G 2.799
+(se).15 G .299(ntries from the directory stack.)-2.799 F -.4(Wi)5.299 G
+.299(th no ar).4 F .299(guments, remo)-.18 F -.15(ve)-.15 G 2.799(st).15
+G .3(he top directory from the)-2.799 F 1.479(stack, and performs a)144
+686.4 R F1(cd)3.979 E F0 1.479(to the ne)3.979 F 3.979(wt)-.25 G 1.479
+(op directory)-3.979 F 6.479(.A)-.65 G -.18(rg)-6.479 G 1.478
+(uments, if supplied, ha).18 F 1.778 -.15(ve t)-.2 H 1.478(he follo).15
+F(wing)-.25 E(meanings:)144 698.4 Q F1<ad6e>144 710.4 Q F0 .551
+(Suppresses the normal change of directory when remo)180 710.4 R .551
+(ving directories from the stack, so)-.15 F
+(that only the stack is manipulated.)180 722.4 Q(GNU Bash 5.1)72 768 Q
+(2020 October 29)141.235 E(67)190.395 E 0 Cg EP
+%%Page: 68 68
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(+)144 84 Q/F2 10/Times-Italic@0 SF(n)A F0(Remo)180 84 Q -.15(ve)-.15
+G 2.64(st).15 G(he)-2.64 E F2(n)2.64 E F0 .14
+(th entry counting from the left of the list sho)B .14(wn by)-.25 F F1
+(dirs)2.64 E F0 2.64(,s)C .14(tarting with zero.)-2.64 F -.15(Fo)180 96
+S 2.5(re).15 G(xample:)-2.65 E/F3 10/Courier@0 SF(popd +0)2.5 E F0(remo)
+2.5 E -.15(ve)-.15 G 2.5(st).15 G(he \214rst directory)-2.5 E(,)-.65 E
+F3(popd +1)2.5 E F0(the second.)2.5 E F1<ad>144 108 Q F2(n)A F0(Remo)180
+108 Q -.15(ve)-.15 G 3.759(st).15 G(he)-3.759 E F2(n)3.759 E F0 1.259
+(th entry counting from the right of the list sho)B 1.26(wn by)-.25 F F1
+(dirs)3.76 E F0 3.76(,s)C 1.26(tarting with)-3.76 F 2.5(zero. F)180 120
+R(or e)-.15 E(xample:)-.15 E F3(popd -0)2.5 E F0(remo)2.5 E -.15(ve)-.15
+G 2.5(st).15 G(he last directory)-2.5 E(,)-.65 E F3(popd -1)2.5 E F0
+(the ne)2.5 E(xt to last.)-.15 E .644(If the)144 136.8 R F1(popd)3.144 E
+F0 .644(command is successful, a)3.144 F F1(dirs)3.143 E F0 .643
+(is performed as well, and the return status is 0.)3.143 F F1(popd)5.643
+E F0 .415(returns f)144 148.8 R .415(alse if an in)-.1 F -.25(va)-.4 G
+.415(lid option is encountered, the directory stack is empty).25 F 2.916
+(,an)-.65 G(on-e)-2.916 E .416(xistent direc-)-.15 F
+(tory stack entry is speci\214ed, or the directory change f)144 160.8 Q
+(ails.)-.1 E F1(printf)108 177.6 Q F0([)2.5 E F1<ad76>A F2(var)2.5 E F0
+(])A F2(format)2.5 E F0([)2.5 E F2(ar)A(guments)-.37 E F0(])A .358
+(Write the formatted)144 189.6 R F2(ar)2.858 E(guments)-.37 E F0 .358
+(to the standard output under the control of the)2.858 F F2(format)2.857
+E F0 5.357(.T)C(he)-5.357 E F1<ad76>2.857 E F0(op-)2.857 E .714
+(tion causes the output to be assigned to the v)144 201.6 R(ariable)-.25
+E F2(var)3.214 E F0 .714(rather than being printed to the standard)3.214
+F(output.)144 213.6 Q(The)144 237.6 Q F2(format)3.018 E F0 .517(is a ch\
+aracter string which contains three types of objects: plain characters,\
+ which are)3.018 F .704(simply copied to standard output, character esc\
+ape sequences, which are con)144 249.6 R -.15(ve)-.4 G .704
+(rted and copied to).15 F .036(the standard output, and format speci\
+\214cations, each of which causes printing of the ne)144 261.6 R .036
+(xt successi)-.15 F -.15(ve)-.25 G F2(ar)144 273.6 Q(gument)-.37 E F0
+5.531(.I)C 3.031(na)-5.531 G .531(ddition to the standard)-3.031 F F2
+(printf)3.032 E F0 .532(\(1\) format speci\214cations,)B F1(printf)3.032
+E F0 .532(interprets the follo)3.032 F(w-)-.25 E(ing e)144 285.6 Q
+(xtensions:)-.15 E F1(%b)144 297.6 Q F0(causes)180 297.6 Q F1(printf)
+2.596 E F0 .096(to e)2.596 F .096
+(xpand backslash escape sequences in the corresponding)-.15 F F2(ar)
+2.596 E(gument)-.37 E F0 .095(in the)2.595 F(same w)180 309.6 Q(ay as)
+-.1 E F1(echo \255e)2.5 E F0(.)A F1(%q)144 321.6 Q F0(causes)180 321.6 Q
+F1(printf)2.51 E F0 .01(to output the corresponding)2.51 F F2(ar)2.51 E
+(gument)-.37 E F0 .01(in a format that can be reused as shell)2.51 F
+(input.)180 333.6 Q F1(%\()144 345.6 Q F2(datefmt)A F1(\)T)A F0(causes)
+180 357.6 Q F1(printf)4.404 E F0 1.904
+(to output the date-time string resulting from using)4.404 F F2(datefmt)
+4.404 E F0 1.903(as a format)4.404 F .38(string for)180 369.6 R F2
+(strftime)2.881 E F0 2.881(\(3\). The)B(corresponding)2.881 E F2(ar)
+2.881 E(gument)-.37 E F0 .381(is an inte)2.881 F .381
+(ger representing the number)-.15 F .293(of seconds since the epoch.)180
+381.6 R -1 -.8(Tw o)5.293 H .293(special ar)3.593 F .293(gument v)-.18 F
+.293(alues may be used: \2551 represents the)-.25 F .693
+(current time, and \2552 represents the time the shell w)180 393.6 R
+.693(as in)-.1 F -.2(vo)-.4 G -.1(ke).2 G 3.194(d. If).1 F .694(no ar)
+3.194 F .694(gument is speci-)-.18 F .21(\214ed, con)180 405.6 R -.15
+(ve)-.4 G .21(rsion beha).15 F -.15(ve)-.2 G 2.71(sa).15 G 2.71(si)-2.71
+G 2.71<66ad>-2.71 G 2.71(1h)-2.71 G .21(ad been gi)-2.71 F -.15(ve)-.25
+G 2.71(n. This).15 F .21(is an e)2.71 F .21(xception to the usual)-.15 F
+F1(printf)2.71 E F0(beha)180 417.6 Q(vior)-.2 E(.)-.55 E .901
+(The %b, %q, and %T directi)144 434.4 R -.15(ve)-.25 G 3.401(sa).15 G
+.901(ll use the \214eld width and precision ar)-3.401 F .902
+(guments from the format)-.18 F .358(speci\214cation and write that man)
+144 446.4 R 2.858(yb)-.15 G .357
+(ytes from \(or use that wide a \214eld for\) the e)-2.858 F .357
+(xpanded ar)-.15 F(gument,)-.18 E
+(which usually contains more characters than the original.)144 458.4 Q
+(Ar)144 475.2 Q .463(guments to non-string format speci\214ers are trea\
+ted as C constants, e)-.18 F .464(xcept that a leading plus or)-.15 F
+1.259(minus sign is allo)144 487.2 R 1.259
+(wed, and if the leading character is a single or double quote, the v)
+-.25 F 1.258(alue is the)-.25 F(ASCII v)144 499.2 Q(alue of the follo)
+-.25 E(wing character)-.25 E(.)-.55 E(The)144 516 Q F2(format)2.514 E F0
+.015(is reused as necessary to consume all of the)2.514 F F2(ar)2.515 E
+(guments)-.37 E F0 5.015(.I)C 2.515(ft)-5.015 G(he)-2.515 E F2(format)
+2.515 E F0 .015(requires more)2.515 F F2(ar)2.515 E(-)-.2 E(guments)144
+528 Q F0 .566(than are supplied, the e)3.066 F .566
+(xtra format speci\214cations beha)-.15 F .866 -.15(ve a)-.2 H 3.066(si)
+.15 G 3.065(faz)-3.066 G .565(ero v)-3.065 F .565(alue or null string,)
+-.25 F(as appropriate, had been supplied.)144 540 Q(The return v)5 E
+(alue is zero on success, non-zero on f)-.25 E(ailure.)-.1 E F1(pushd)
+108 556.8 Q F0([)2.5 E F1<ad6e>A F0 2.5(][)C(+)-2.5 E F2(n)A F0 2.5(][)C
+<ad>-2.5 E F2(n)A F0(])A F1(pushd)108 568.8 Q F0([)2.5 E F1<ad6e>A F0
+2.5(][)C F2(dir)-2.5 E F0(])A .639(Adds a directory to the top of the d\
+irectory stack, or rotates the stack, making the ne)144 580.8 R 3.14(wt)
+-.25 G .64(op of the)-3.14 F .417(stack the current w)144 592.8 R .416
+(orking directory)-.1 F 5.416(.W)-.65 G .416(ith no ar)-5.816 F
+(guments,)-.18 E F1(pushd)2.916 E F0 -.15(ex)2.916 G .416
+(changes the top tw).15 F 2.916(od)-.1 G(irectories)-2.916 E 1.625
+(and returns 0, unless the directory stack is empty)144 604.8 R 6.625
+(.A)-.65 G -.18(rg)-6.625 G 1.625(uments, if supplied, ha).18 F 1.925
+-.15(ve t)-.2 H 1.625(he follo).15 F(wing)-.25 E(meanings:)144 616.8 Q
+F1<ad6e>144 628.8 Q F0 1.811(Suppresses the normal change of directory \
+when rotating or adding directories to the)180 628.8 R
+(stack, so that only the stack is manipulated.)180 640.8 Q F1(+)144
+652.8 Q F2(n)A F0 1.267(Rotates the stack so that the)180 652.8 R F2(n)
+3.767 E F0 1.268(th directory \(counting from the left of the list sho)B
+1.268(wn by)-.25 F F1(dirs)180 664.8 Q F0 2.5(,s)C
+(tarting with zero\) is at the top.)-2.5 E F1<ad>144 676.8 Q F2(n)A F0
+.92(Rotates the stack so that the)180 676.8 R F2(n)3.42 E F0 .92
+(th directory \(counting from the right of the list sho)B .92(wn by)-.25
+F F1(dirs)180 688.8 Q F0 2.5(,s)C(tarting with zero\) is at the top.)
+-2.5 E F2(dir)144.35 700.8 Q F0(Adds)180 700.8 Q F2(dir)3.137 E F0 .287
+(to the directory stack at the top, making it the ne)3.517 F 2.788(wc)
+-.25 G .288(urrent w)-2.788 F .288(orking directory as)-.1 F
+(if it had been supplied as the ar)180 712.8 Q(gument to the)-.18 E F1
+(cd)2.5 E F0 -.2(bu)2.5 G(iltin.).2 E .489(If the)144 729.6 R F1(pushd)
+2.989 E F0 .489(command is successful, a)2.989 F F1(dirs)2.988 E F0 .488
+(is performed as well.)2.988 F .488(If the \214rst form is used,)5.488 F
+F1(pushd)2.988 E F0(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(68)
+190.395 E 0 Cg EP
+%%Page: 69 69
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E 1.039
+(returns 0 unless the cd to)144 84 R/F1 10/Times-Italic@0 SF(dir)3.889 E
+F0 -.1(fa)4.269 G 3.539(ils. W).1 F 1.039(ith the second form,)-.4 F/F2
+10/Times-Bold@0 SF(pushd)3.54 E F0 1.04(returns 0 unless the directory)
+3.54 F .847(stack is empty)144 96 R 3.347(,an)-.65 G(on-e)-3.347 E .847
+(xistent directory stack element is speci\214ed, or the directory chang\
+e to the)-.15 F(speci\214ed ne)144 108 Q 2.5(wc)-.25 G
+(urrent directory f)-2.5 E(ails.)-.1 E F2(pwd)108 124.8 Q F0([)2.5 E F2
+(\255LP)A F0(])A .844(Print the absolute pathname of the current w)144
+136.8 R .845(orking directory)-.1 F 5.845(.T)-.65 G .845
+(he pathname printed contains no)-5.845 F .182(symbolic links if the)144
+148.8 R F2<ad50>2.681 E F0 .181(option is supplied or the)2.681 F F2
+.181(\255o ph)2.681 F(ysical)-.15 E F0 .181(option to the)2.681 F F2
+(set)2.681 E F0 -.2(bu)2.681 G .181(iltin command is).2 F 3.263
+(enabled. If)144 160.8 R(the)3.263 E F2<ad4c>3.263 E F0 .763
+(option is used, the pathname printed may contain symbolic links.)3.263
+F .764(The return)5.764 F .405(status is 0 unless an error occurs while\
+ reading the name of the current directory or an in)144 172.8 R -.25(va)
+-.4 G .405(lid op-).25 F(tion is supplied.)144 184.8 Q F2 -.18(re)108
+201.6 S(ad).18 E F0([)3.816 E F2(\255ers)A F0 3.816(][)C F2<ad61>-3.816
+E F1(aname)3.816 E F0 3.816(][)C F2<ad64>-3.816 E F1(delim)3.816 E F0
+3.816(][)C F2<ad69>-3.816 E F1(te)3.816 E(xt)-.2 E F0 3.816(][)C F2
+<ad6e>-3.816 E F1(nc)3.816 E(har)-.15 E(s)-.1 E F0 3.817(][)C F2<ad4e>
+-3.817 E F1(nc)3.817 E(har)-.15 E(s)-.1 E F0 3.817(][)C F2<ad70>-3.817 E
+F1(pr)3.817 E(ompt)-.45 E F0 3.817(][)C F2<ad74>-3.817 E F1(timeout)
+3.817 E F0 3.817(][)C F2<ad75>-3.817 E F1(fd)3.817 E F0(])A([)108 213.6
+Q F1(name)A F0(...])2.5 E .516(One line is read from the standard input\
+, or from the \214le descriptor)144 225.6 R F1(fd)3.016 E F0 .516
+(supplied as an ar)3.016 F .516(gument to)-.18 F(the)144 237.6 Q F2
+<ad75>2.935 E F0 .435(option, split into w)2.935 F .435
+(ords as described abo)-.1 F .735 -.15(ve u)-.15 H(nder).15 E F2 -.75
+(Wo)2.935 G .435(rd Splitting).75 F F0 2.935(,a)C .436(nd the \214rst w)
+-2.935 F .436(ord is as-)-.1 F .376(signed to the \214rst)144 249.6 R F1
+(name)3.236 E F0 2.876(,t).18 G .376(he second w)-2.876 F .376
+(ord to the second)-.1 F F1(name)3.236 E F0 2.876(,a).18 G .376
+(nd so on.)-2.876 F .375(If there are more w)5.376 F(ords)-.1 E .236
+(than names, the remaining w)144 261.6 R .237(ords and their interv)-.1
+F .237(ening delimiters are assigned to the last)-.15 F F1(name)3.097 E
+F0 5.237(.I).18 G(f)-5.237 E .875(there are fe)144 273.6 R .875(wer w)
+-.25 F .875(ords read from the input stream than names, the remaining n\
+ames are assigned)-.1 F .517(empty v)144 285.6 R 3.017(alues. The)-.25 F
+.517(characters in)3.017 F/F3 9/Times-Bold@0 SF(IFS)3.017 E F0 .518
+(are used to split the line into w)2.767 F .518
+(ords using the same rules the)-.1 F .027(shell uses for e)144 297.6 R
+.026(xpansion \(described abo)-.15 F .326 -.15(ve u)-.15 H(nder).15 E F2
+-.75(Wo)2.526 G .026(rd Splitting).75 F F0 2.526(\). The)B .026
+(backslash character \()2.526 F F2(\\)A F0 2.526(\)m)C(ay)-2.526 E .488
+(be used to remo)144 309.6 R .788 -.15(ve a)-.15 H .788 -.15(ny s).15 H
+.488(pecial meaning for the ne).15 F .488
+(xt character read and for line continuation.)-.15 F(Op-)5.489 E
+(tions, if supplied, ha)144 321.6 Q .3 -.15(ve t)-.2 H(he follo).15 E
+(wing meanings:)-.25 E F2<ad61>144 333.6 Q F1(aname)2.5 E F0 1.026
+(The w)180 345.6 R 1.026
+(ords are assigned to sequential indices of the array v)-.1 F(ariable)
+-.25 E F1(aname)3.855 E F0 3.525(,s).18 G 1.025(tarting at 0.)-3.525 F
+F1(aname)180.33 357.6 Q F0(is unset before an)2.68 E 2.5(yn)-.15 G .5
+-.25(ew va)-2.5 H(lues are assigned.).25 E(Other)5 E F1(name)2.5 E F0
+(ar)2.5 E(guments are ignored.)-.18 E F2<ad64>144 369.6 Q F1(delim)2.5 E
+F0 .28(The \214rst character of)180 381.6 R F1(delim)2.78 E F0 .281
+(is used to terminate the input line, rather than ne)2.78 F 2.781
+(wline. If)-.25 F F1(de-)2.781 E(lim)180 393.6 Q F0
+(is the empty string,)2.5 E F2 -.18(re)2.5 G(ad).18 E F0
+(will terminate a line when it reads a NUL character)2.5 E(.)-.55 E F2
+<ad65>144 405.6 Q F0 .373
+(If the standard input is coming from a terminal,)180 405.6 R F2 -.18
+(re)2.873 G(adline).18 E F0(\(see)2.873 E F3(READLINE)2.872 E F0(abo)
+2.622 E -.15(ve)-.15 G 2.872(\)i).15 G 2.872(su)-2.872 G(sed)-2.872 E
+.218(to obtain the line.)180 417.6 R .218
+(Readline uses the current \(or def)5.218 F .218
+(ault, if line editing w)-.1 F .218(as not pre)-.1 F(viously)-.25 E
+(acti)180 429.6 Q -.15(ve)-.25 G 2.5(\)e).15 G(diting settings, b)-2.5 E
+(ut uses Readline')-.2 E 2.5(sd)-.55 G(ef)-2.5 E
+(ault \214lename completion.)-.1 E F2<ad69>144 441.6 Q F1(te)2.5 E(xt)
+-.2 E F0(If)180 441.6 Q F2 -.18(re)2.716 G(adline).18 E F0 .216
+(is being used to read the line,)2.716 F F1(te)2.716 E(xt)-.2 E F0 .216
+(is placed into the editing b)2.716 F(uf)-.2 E .215(fer before edit-)
+-.25 F(ing be)180 453.6 Q(gins.)-.15 E F2<ad6e>144 465.6 Q F1(nc)2.5 E
+(har)-.15 E(s)-.1 E F2 -.18(re)180 477.6 S(ad).18 E F0 .322
+(returns after reading)2.822 F F1(nc)2.823 E(har)-.15 E(s)-.1 E F0 .323
+(characters rather than w)2.823 F .323
+(aiting for a complete line of in-)-.1 F(put, b)180 489.6 Q
+(ut honors a delimiter if fe)-.2 E(wer than)-.25 E F1(nc)2.5 E(har)-.15
+E(s)-.1 E F0(characters are read before the delimiter)2.5 E(.)-.55 E F2
+<ad4e>144 501.6 Q F1(nc)2.5 E(har)-.15 E(s)-.1 E F2 -.18(re)180 513.6 S
+(ad).18 E F0 1.269(returns after reading e)3.77 F(xactly)-.15 E F1(nc)
+3.769 E(har)-.15 E(s)-.1 E F0 1.269(characters rather than w)3.769 F
+1.269(aiting for a complete)-.1 F .274
+(line of input, unless EOF is encountered or)180 525.6 R F2 -.18(re)
+2.775 G(ad).18 E F0 .275(times out.)2.775 F .275
+(Delimiter characters encoun-)5.275 F 1.003
+(tered in the input are not treated specially and do not cause)180 537.6
+R F2 -.18(re)3.502 G(ad).18 E F0 1.002(to return until)3.502 F F1(nc)
+3.502 E(har)-.15 E(s)-.1 E F0 .608(characters are read.)180 549.6 R .608
+(The result is not split on the characters in)5.608 F F2(IFS)3.108 E F0
+3.108(;t)C .609(he intent is that the)-3.108 F -.25(va)180 561.6 S .67
+(riable is assigned e).25 F .669
+(xactly the characters read \(with the e)-.15 F .669
+(xception of backslash; see the)-.15 F F2<ad72>180 573.6 Q F0
+(option belo)2.5 E(w\).)-.25 E F2<ad70>144 585.6 Q F1(pr)2.5 E(ompt)-.45
+E F0(Display)180 597.6 Q F1(pr)3.66 E(ompt)-.45 E F0 1.161
+(on standard error)3.66 F 3.661(,w)-.4 G 1.161(ithout a trailing ne)
+-3.661 F 1.161(wline, before attempting to read)-.25 F(an)180 609.6 Q
+2.5(yi)-.15 G 2.5(nput. The)-2.5 F
+(prompt is displayed only if input is coming from a terminal.)2.5 E F2
+<ad72>144 621.6 Q F0 .544(Backslash does not act as an escape character)
+180 621.6 R 5.543(.T)-.55 G .543
+(he backslash is considered to be part of)-5.543 F .492(the line.)180
+633.6 R .492(In particular)5.492 F 2.992(,ab)-.4 G(ackslash-ne)-2.992 E
+.493(wline pair may not then be used as a line continua-)-.25 F(tion.)
+180 645.6 Q F2<ad73>144 657.6 Q F0(Silent mode.)180 657.6 Q
+(If input is coming from a terminal, characters are not echoed.)5 E F2
+<ad74>144 669.6 Q F1(timeout)2.5 E F0(Cause)180 681.6 Q F2 -.18(re)2.929
+G(ad).18 E F0 .428(to time out and return f)2.929 F .428
+(ailure if a complete line of input \(or a speci\214ed num-)-.1 F .56
+(ber of characters\) is not read within)180 693.6 R F1(timeout)3.061 E
+F0(seconds.)3.061 E F1(timeout)5.561 E F0 .561(may be a decimal number)
+3.061 F(with a fractional portion follo)180 705.6 Q
+(wing the decimal point.)-.25 E(This option is only ef)5 E(fecti)-.25 E
+.3 -.15(ve i)-.25 H(f).15 E F2 -.18(re)2.5 G(ad).18 E F0 .506(is readin\
+g input from a terminal, pipe, or other special \214le; it has no ef)180
+717.6 R .506(fect when reading)-.25 F .59(from re)180 729.6 R .59
+(gular \214les.)-.15 F(If)5.59 E F2 -.18(re)3.09 G(ad).18 E F0 .589
+(times out,)3.09 F F2 -.18(re)3.089 G(ad).18 E F0(sa)3.089 E -.15(ve)-.2
+G 3.089(sa).15 G .889 -.15(ny p)-3.089 H .589
+(artial input read into the speci\214ed).15 F(GNU Bash 5.1)72 768 Q
+(2020 October 29)141.235 E(69)190.395 E 0 Cg EP
+%%Page: 70 70
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E -.25(va)180 84 S
+(riable).25 E/F1 10/Times-Italic@0 SF(name)2.77 E F0 5.27(.I)C(f)-5.27 E
+F1(timeout)2.77 E F0 .27(is 0,)2.77 F/F2 10/Times-Bold@0 SF -.18(re)2.77
+G(ad).18 E F0 .27(returns immediately)2.77 F 2.77(,w)-.65 G .27
+(ithout trying to read an)-2.77 F 2.77(yd)-.15 G(ata.)-2.77 E 1.12
+(The e)180 96 R 1.12(xit status is 0 if input is a)-.15 F -.25(va)-.2 G
+1.12(ilable on the speci\214ed \214le descriptor).25 F 3.62(,n)-.4 G
+1.12(on-zero other)-3.62 F(-)-.2 E 2.5(wise. The)180 108 R -.15(ex)2.5 G
+(it status is greater than 128 if the timeout is e).15 E(xceeded.)-.15 E
+F2<ad75>144 120 Q F1(fd)2.5 E F0(Read input from \214le descriptor)180
+120 Q F1(fd)2.5 E F0(.)A .522(If no)144 136.8 R F1(names)3.382 E F0 .522
+(are supplied, the line read, without the ending delimiter b)3.292 F
+.522(ut otherwise unmodi\214ed, is)-.2 F 1.187(assigned to the v)144
+148.8 R(ariable)-.25 E/F3 9/Times-Bold@0 SF(REPL)3.686 E(Y)-.828 E/F4 9
+/Times-Roman@0 SF(.)A F0 1.186(The e)5.686 F 1.186
+(xit status is zero, unless end-of-\214le is encountered,)-.15 F F2 -.18
+(re)3.686 G(ad).18 E F0 .96
+(times out \(in which case the status is greater than 128\), a v)144
+160.8 R .961(ariable assignment error \(such as as-)-.25 F .707
+(signing to a readonly v)144 172.8 R .706(ariable\) occurs, or an in)
+-.25 F -.25(va)-.4 G .706(lid \214le descriptor is supplied as the ar)
+.25 F .706(gument to)-.18 F F2<ad75>144 184.8 Q F0(.)A F2 -.18(re)108
+201.6 S(adonly).18 E F0([)2.5 E F2(\255aAf)A F0 2.5(][)C F2<ad70>-2.5 E
+F0 2.5(][)C F1(name)-2.5 E F0([=)A F1(wor)A(d)-.37 E F0 2.5(].)C(..])
+-2.5 E .77(The gi)144 213.6 R -.15(ve)-.25 G(n).15 E F1(names)3.27 E F0
+.77(are mark)3.27 F .77(ed readonly; the v)-.1 F .77(alues of these)-.25
+F F1(names)3.63 E F0 .77(may not be changed by subse-)3.54 F 1.097
+(quent assignment.)144 225.6 R 1.097(If the)6.097 F F2<ad66>3.597 E F0
+1.097(option is supplied, the functions corresponding to the)3.597 F F1
+(names)3.596 E F0 1.096(are so)3.596 F(mark)144 237.6 Q 3.334(ed. The)
+-.1 F F2<ad61>3.334 E F0 .834(option restricts the v)3.334 F .834
+(ariables to inde)-.25 F -.15(xe)-.15 G 3.334(da).15 G .834(rrays; the)
+-3.334 F F2<ad41>3.334 E F0 .834(option restricts the v)3.334 F(ari-)
+-.25 E .777(ables to associati)144 249.6 R 1.077 -.15(ve a)-.25 H 3.277
+(rrays. If).15 F .777(both options are supplied,)3.277 F F2<ad41>3.277 E
+F0(tak)3.277 E .776(es precedence.)-.1 F .776(If no)5.776 F F1(name)
+3.636 E F0(ar)3.456 E(gu-)-.18 E .521(ments are gi)144 261.6 R -.15(ve)
+-.25 G .521(n, or if the).15 F F2<ad70>3.021 E F0 .521
+(option is supplied, a list of all readonly names is printed.)3.021 F
+.522(The other)5.521 F .295(options may be used to restrict the output \
+to a subset of the set of readonly names.)144 273.6 R(The)5.295 E F2
+<ad70>2.795 E F0(option)2.795 E .786
+(causes output to be displayed in a format that may be reused as input.)
+144 285.6 R .786(If a v)5.786 F .786(ariable name is fol-)-.25 F(lo)144
+297.6 Q .718(wed by =)-.25 F F1(wor)A(d)-.37 E F0 3.218(,t)C .718(he v)
+-3.218 F .718(alue of the v)-.25 F .718(ariable is set to)-.25 F F1(wor)
+3.218 E(d)-.37 E F0 5.718(.T)C .718(he return status is 0 unless an in)
+-5.718 F -.25(va)-.4 G(lid).25 E .26(option is encountered, one of the)
+144 309.6 R F1(names)3.12 E F0 .26(is not a v)3.03 F .26(alid shell v)
+-.25 F .26(ariable name, or)-.25 F F2<ad66>2.76 E F0 .26
+(is supplied with a)2.76 F F1(name)144.36 321.6 Q F0
+(that is not a function.)2.68 E F2 -.18(re)108 338.4 S(tur).18 E(n)-.15
+E F0([)2.5 E F1(n)A F0(])A .021(Causes a function to stop e)144 350.4 R
+-.15(xe)-.15 G .021(cuting and return the v).15 F .021
+(alue speci\214ed by)-.25 F F1(n)2.88 E F0 .02(to its caller)2.76 F 5.02
+(.I)-.55 G(f)-5.02 E F1(n)2.88 E F0 .02(is omitted,)2.76 F .596
+(the return status is that of the last command e)144 362.4 R -.15(xe)
+-.15 G .597(cuted in the function body).15 F 5.597(.I)-.65 G(f)-5.597 E
+F2 -.18(re)3.097 G(tur).18 E(n)-.15 E F0 .597(is e)3.097 F -.15(xe)-.15
+G(cuted).15 E .267(by a trap handler)144 374.4 R 2.767(,t)-.4 G .267
+(he last command used to determine the status is the last command e)
+-2.767 F -.15(xe)-.15 G .267(cuted be-).15 F .02(fore the trap handler)
+144 386.4 R 5.02(.I)-.55 G(f)-5.02 E F2 -.18(re)2.52 G(tur).18 E(n)-.15
+E F0 .02(is e)2.52 F -.15(xe)-.15 G .02(cuted during a).15 F F2(DEB)2.52
+E(UG)-.1 E F0 .02(trap, the last command used to deter)2.52 F(-)-.2 E
+.886(mine the status is the last command e)144 398.4 R -.15(xe)-.15 G
+.886(cuted by the trap handler before).15 F F2 -.18(re)3.385 G(tur).18 E
+(n)-.15 E F0 -.1(wa)3.385 G 3.385(si).1 G -1.9 -.4(nv o)-3.385 H -.1(ke)
+.4 G 3.385(d. If).1 F F2 -.18(re)144 410.4 S(tur).18 E(n)-.15 E F0 .627
+(is used outside a function, b)3.127 F .628(ut during e)-.2 F -.15(xe)
+-.15 G .628(cution of a script by the).15 F F2(.)3.128 E F0(\()5.628 E
+F2(sour)A(ce)-.18 E F0 3.128(\)c)C .628(ommand, it)-3.128 F .589
+(causes the shell to stop e)144 422.4 R -.15(xe)-.15 G .589
+(cuting that script and return either).15 F F1(n)3.448 E F0 .588
+(or the e)3.328 F .588(xit status of the last com-)-.15 F .325(mand e)
+144 434.4 R -.15(xe)-.15 G .325(cuted within the script as the e).15 F
+.326(xit status of the script.)-.15 F(If)5.326 E F1(n)2.826 E F0 .326
+(is supplied, the return v)2.826 F .326(alue is)-.25 F .445
+(its least signi\214cant 8 bits.)144 446.4 R .444
+(The return status is non-zero if)5.445 F F2 -.18(re)2.944 G(tur).18 E
+(n)-.15 E F0 .444(is supplied a non-numeric ar)2.944 F(gu-)-.18 E .381
+(ment, or is used outside a function and not during e)144 458.4 R -.15
+(xe)-.15 G .381(cution of a script by).15 F F2(.)2.881 E F0(or)3.714 E
+F2(sour)2.881 E(ce)-.18 E F0 5.381(.A)C .681 -.15(ny c)-5.381 H(om-).15
+E .75(mand associated with the)144 470.4 R F2(RETURN)3.249 E F0 .749
+(trap is e)3.249 F -.15(xe)-.15 G .749(cuted before e).15 F -.15(xe)-.15
+G .749(cution resumes after the function).15 F(or script.)144 482.4 Q F2
+(set)108 499.2 Q F0([)2.5 E F2(\255\255abefhkmnptuvxBCEHPT)A F0 2.5(][)C
+F2<ad6f>-2.5 E F1(option\255name)2.5 E F0 2.5(][)C F1(ar)-2.5 E(g)-.37 E
+F0(...])2.5 E F2(set)108 511.2 Q F0([)2.5 E F2(+abefhkmnptuvxBCEHPT)A F0
+2.5(][)C F2(+o)-2.5 E F1(option\255name)2.5 E F0 2.5(][)C F1(ar)-2.5 E
+(g)-.37 E F0(...])2.5 E -.4(Wi)144 523.2 S .835
+(thout options, the name and v).4 F .835(alue of each shell v)-.25 F
+.836(ariable are displayed in a format that can be)-.25 F .784
+(reused as input for setting or resetting the currently-set v)144 535.2
+R 3.284(ariables. Read-only)-.25 F -.25(va)3.284 G .783
+(riables cannot be).25 F 2.946(reset. In)144 547.2 R F1 .447(posix mode)
+2.946 F F0 2.947(,o)C .447(nly shell v)-2.947 F .447
+(ariables are listed.)-.25 F .447
+(The output is sorted according to the current)5.447 F 3.531
+(locale. When)144 559.2 R 1.031(options are speci\214ed, the)3.531 F
+3.531(ys)-.15 G 1.031(et or unset shell attrib)-3.531 F 3.53(utes. An)
+-.2 F 3.53(ya)-.15 G -.18(rg)-3.53 G 1.03(uments remaining).18 F .584
+(after option processing are treated as v)144 571.2 R .585
+(alues for the positional parameters and are assigned, in or)-.25 F(-)
+-.2 E(der)144 583.2 Q 2.5(,t)-.4 G(o)-2.5 E F2($1)2.5 E F0(,)A F2($2)2.5
+E F0(,)A F2 2.5(... $)2.5 F F1(n)A F0 5(.O)C(ptions, if speci\214ed, ha)
+-5 E .3 -.15(ve t)-.2 H(he follo).15 E(wing meanings:)-.25 E F2<ad61>144
+595.2 Q F0 1.378(Each v)184 595.2 R 1.377
+(ariable or function that is created or modi\214ed is gi)-.25 F -.15(ve)
+-.25 G 3.877(nt).15 G 1.377(he e)-3.877 F 1.377(xport attrib)-.15 F
+1.377(ute and)-.2 F(mark)184 607.2 Q(ed for e)-.1 E(xport to the en)-.15
+E(vironment of subsequent commands.)-.4 E F2<ad62>144 619.2 Q F0 .131
+(Report the status of terminated background jobs immediately)184 619.2 R
+2.632(,r)-.65 G .132(ather than before the ne)-2.632 F(xt)-.15 E
+(primary prompt.)184 631.2 Q(This is ef)5 E(fecti)-.25 E .3 -.15(ve o)
+-.25 H(nly when job control is enabled.).15 E F2<ad65>144 643.2 Q F0
+.088(Exit immediately if a)184 643.2 R F1(pipeline)2.588 E F0 .087
+(\(which may consist of a single)2.588 F F1 .087(simple command)2.587 F
+F0 .087(\), a)B F1(list)2.587 E F0 2.587(,o)C(r)-2.587 E(a)184 655.2 Q
+F1 1.52(compound command)4.02 F F0(\(see)4.021 E F3 1.521(SHELL GRAMMAR)
+4.021 F F0(abo)3.771 E -.15(ve)-.15 G 1.521(\), e).15 F 1.521
+(xits with a non-zero status.)-.15 F .08(The shell does not e)184 667.2
+R .079(xit if the command that f)-.15 F .079
+(ails is part of the command list immediately)-.1 F(follo)184 679.2 Q
+1.654(wing a)-.25 F F2(while)4.154 E F0(or)4.154 E F2(until)4.154 E F0
+-.1(ke)4.154 G(yw)-.05 E 1.655(ord, part of the test follo)-.1 F 1.655
+(wing the)-.25 F F2(if)4.155 E F0(or)4.155 E F2(elif)4.155 E F0(reserv)
+4.155 E(ed)-.15 E -.1(wo)184 691.2 S .582(rds, part of an).1 F 3.082(yc)
+-.15 G .582(ommand e)-3.082 F -.15(xe)-.15 G .581(cuted in a).15 F F2
+(&&)3.081 E F0(or)3.081 E F2(||)3.081 E F0 .581(list e)3.081 F .581
+(xcept the command follo)-.15 F(wing)-.25 E .917(the \214nal)184 703.2 R
+F2(&&)3.417 E F0(or)3.417 E F2(||)3.417 E F0 3.417(,a)C 1.217 -.15(ny c)
+-3.417 H .918(ommand in a pipeline b).15 F .918
+(ut the last, or if the command')-.2 F 3.418(sr)-.55 G(eturn)-3.418 E
+-.25(va)184 715.2 S .661(lue is being in).25 F -.15(ve)-.4 G .661
+(rted with).15 F F2(!)3.161 E F0 5.661(.I)C 3.161(fac)-5.661 G .66
+(ompound command other than a subshell returns a)-3.161 F 1.112
+(non-zero status because a command f)184 727.2 R 1.112(ailed while)-.1 F
+F2<ad65>3.612 E F0 -.1(wa)3.612 G 3.612(sb).1 G 1.113
+(eing ignored, the shell does)-3.612 F(GNU Bash 5.1)72 768 Q
+(2020 October 29)141.235 E(70)190.395 E 0 Cg EP
+%%Page: 71 71
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E .178(not e)184 84
+R 2.678(xit. A)-.15 F .178(trap on)2.678 F/F1 10/Times-Bold@0 SF(ERR)
+2.678 E F0 2.678(,i)C 2.678(fs)-2.678 G .178(et, is e)-2.678 F -.15(xe)
+-.15 G .178(cuted before the shell e).15 F 2.677(xits. This)-.15 F .177
+(option applies to)2.677 F .617(the shell en)184 96 R .617
+(vironment and each subshell en)-.4 F .617(vironment separately \(see)
+-.4 F/F2 9/Times-Bold@0 SF .618(COMMAND EXE-)3.118 F .643(CUTION ENVIR)
+184 108 R(ONMENT)-.27 E F0(abo)2.893 E -.15(ve)-.15 G .643
+(\), and may cause subshells to e).15 F .643(xit before e)-.15 F -.15
+(xe)-.15 G .642(cuting all).15 F(the commands in the subshell.)184 120 Q
+.998(If a compound command or shell function e)184 138 R -.15(xe)-.15 G
+.999(cutes in a conte).15 F .999(xt where)-.15 F F1<ad65>3.499 E F0 .999
+(is being ig-)3.499 F .089(nored, none of the commands e)184 150 R -.15
+(xe)-.15 G .089(cuted within the compound command or function body).15 F
+.502(will be af)184 162 R .502(fected by the)-.25 F F1<ad65>3.002 E F0
+.502(setting, e)3.002 F -.15(ve)-.25 G 3.002(ni).15 G(f)-3.002 E F1
+<ad65>3.002 E F0 .502(is set and a command returns a f)3.002 F .503
+(ailure sta-)-.1 F 4.184(tus. If)184 174 R 4.184(ac)4.184 G 1.684
+(ompound command or shell function sets)-4.184 F F1<ad65>4.183 E F0
+1.683(while e)4.183 F -.15(xe)-.15 G 1.683(cuting in a conte).15 F(xt)
+-.15 E(where)184 186 Q F1<ad65>3.153 E F0 .653
+(is ignored, that setting will not ha)3.153 F .954 -.15(ve a)-.2 H .954
+-.15(ny e).15 H -.25(ff).15 G .654(ect until the compound command).25 F
+(or the command containing the function call completes.)184 198 Q F1
+<ad66>144 210 Q F0(Disable pathname e)184 210 Q(xpansion.)-.15 E F1
+<ad68>144 222 Q F0 .988(Remember the location of commands as the)184 222
+R 3.488(ya)-.15 G .988(re look)-3.488 F .988(ed up for e)-.1 F -.15(xe)
+-.15 G 3.488(cution. This).15 F .987(is en-)3.487 F(abled by def)184 234
+Q(ault.)-.1 E F1<ad6b>144 246 Q F0 .513(All ar)184 246 R .514
+(guments in the form of assignment statements are placed in the en)-.18
+F .514(vironment for a)-.4 F
+(command, not just those that precede the command name.)184 258 Q F1
+<ad6d>144 270 Q F0 .149(Monitor mode.)184 270 R .149
+(Job control is enabled.)5.149 F .148(This option is on by def)5.149 F
+.148(ault for interacti)-.1 F .448 -.15(ve s)-.25 H(hells).15 E .65
+(on systems that support it \(see)184 282 R F2 .651(JOB CONTR)3.151 F
+(OL)-.27 E F0(abo)2.901 E -.15(ve)-.15 G 3.151(\). All).15 F .651
+(processes run in a separate)3.151 F .679(process group.)184 294 R .678
+(When a background job completes, the shell prints a line containing it\
+s)5.679 F -.15(ex)184 306 S(it status.).15 E F1<ad6e>144 318 Q F0 .652
+(Read commands b)184 318 R .652(ut do not e)-.2 F -.15(xe)-.15 G .652
+(cute them.).15 F .653(This may be used to check a shell script for)
+5.652 F(syntax errors.)184 330 Q(This is ignored by interacti)5 E .3
+-.15(ve s)-.25 H(hells.).15 E F1<ad6f>144 342 Q/F3 10/Times-Italic@0 SF
+(option\255name)2.5 E F0(The)184 354 Q F3(option\255name)2.5 E F0
+(can be one of the follo)2.5 E(wing:)-.25 E F1(allexport)184 366 Q F0
+(Same as)224 378 Q F1<ad61>2.5 E F0(.)A F1(braceexpand)184 390 Q F0
+(Same as)224 402 Q F1<ad42>2.5 E F0(.)A F1(emacs)184 414 Q F0 .089
+(Use an emacs-style command line editing interf)224 414 R 2.589
+(ace. This)-.1 F .089(is enabled by def)2.589 F(ault)-.1 E .95
+(when the shell is interacti)224 426 R -.15(ve)-.25 G 3.45(,u).15 G .95
+(nless the shell is started with the)-3.45 F F1(\255\255noediting)3.45 E
+F0 2.5(option. This)224 438 R(also af)2.5 E(fects the editing interf)
+-.25 E(ace used for)-.1 E F1 -.18(re)2.5 G(ad \255e).18 E F0(.)A F1(err)
+184 450 Q(exit)-.18 E F0(Same as)224 450 Q F1<ad65>2.5 E F0(.)A F1
+(errtrace)184 462 Q F0(Same as)224 462 Q F1<ad45>2.5 E F0(.)A F1
+(functrace)184 474 Q F0(Same as)224 486 Q F1<ad54>2.5 E F0(.)A F1
+(hashall)184 498 Q F0(Same as)224 498 Q F1<ad68>2.5 E F0(.)A F1
+(histexpand)184 510 Q F0(Same as)224 522 Q F1<ad48>2.5 E F0(.)A F1
+(history)184 534 Q F0 .587(Enable command history)224 534 R 3.087(,a)
+-.65 G 3.087(sd)-3.087 G .587(escribed abo)-3.087 F .887 -.15(ve u)-.15
+H(nder).15 E F2(HIST)3.087 E(OR)-.162 E(Y)-.315 E/F4 9/Times-Roman@0 SF
+(.)A F0 .587(This option is)5.087 F(on by def)224 546 Q
+(ault in interacti)-.1 E .3 -.15(ve s)-.25 H(hells.).15 E F1(ignor)184
+558 Q(eeof)-.18 E F0 1.656(The ef)224 570 R 1.656
+(fect is as if the shell command)-.25 F/F5 10/Courier@0 SF(IGNOREEOF=10)
+4.157 E F0 1.657(had been e)4.157 F -.15(xe)-.15 G(cuted).15 E(\(see)224
+582 Q F1(Shell V)2.5 E(ariables)-.92 E F0(abo)2.5 E -.15(ve)-.15 G(\).)
+.15 E F1 -.1(ke)184 594 S(yw).1 E(ord)-.1 E F0(Same as)224 606 Q F1
+<ad6b>2.5 E F0(.)A F1(monitor)184 618 Q F0(Same as)224 618 Q F1<ad6d>2.5
+E F0(.)A F1(noclob)184 630 Q(ber)-.1 E F0(Same as)224 642 Q F1<ad43>2.5
+E F0(.)A F1(noexec)184 654 Q F0(Same as)224 654 Q F1<ad6e>2.5 E F0(.)A
+F1(noglob)184 666 Q F0(Same as)224 666 Q F1<ad66>2.5 E F0(.)A F1(nolog)
+184 678 Q F0(Currently ignored.)224 678 Q F1(notify)184 690 Q F0
+(Same as)224 690 Q F1<ad62>2.5 E F0(.)A F1(nounset)184 702 Q F0(Same as)
+224 702 Q F1<ad75>2.5 E F0(.)A F1(onecmd)184 714 Q F0(Same as)224 714 Q
+F1<ad74>2.5 E F0(.)A(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(71)
+190.395 E 0 Cg EP
+%%Page: 72 72
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(ph)184 84 Q(ysical)-.15 E F0(Same as)224 84 Q F1<ad50>2.5 E F0(.)A F1
+(pipefail)184 96 Q F0 1.03(If set, the return v)224 96 R 1.029
+(alue of a pipeline is the v)-.25 F 1.029
+(alue of the last \(rightmost\) com-)-.25 F 1.136(mand to e)224 108 R
+1.136
+(xit with a non-zero status, or zero if all commands in the pipeline)
+-.15 F -.15(ex)224 120 S(it successfully).15 E 5(.T)-.65 G
+(his option is disabled by def)-5 E(ault.)-.1 E F1(posix)184 132 Q F0
+2.091(Change the beha)224 132 R 2.091(vior of)-.2 F F1(bash)4.591 E F0
+2.091(where the def)4.591 F 2.091(ault operation dif)-.1 F 2.091
+(fers from the)-.25 F 1.212(POSIX standard to match the standard \()224
+144 R/F2 10/Times-Italic@0 SF 1.212(posix mode)B F0 3.712(\). See)B/F3 9
+/Times-Bold@0 SF 1.212(SEE ALSO)3.712 F F0(belo)3.463 E(w)-.25 E .955
+(for a reference to a document that details ho)224 156 R 3.454(wp)-.25 G
+.954(osix mode af)-3.454 F .954(fects bash')-.25 F 3.454(sb)-.55 G(e-)
+-3.454 E(ha)224 168 Q(vior)-.2 E(.)-.55 E F1(pri)184 180 Q(vileged)-.1 E
+F0(Same as)224 192 Q F1<ad70>2.5 E F0(.)A F1 -.1(ve)184 204 S(rbose).1 E
+F0(Same as)224 204 Q F1<ad76>2.5 E F0(.)A F1(vi)184 216 Q F0 .209
+(Use a vi-style command line editing interf)224 216 R 2.709(ace. This)
+-.1 F .209(also af)2.709 F .21(fects the editing in-)-.25 F(terf)224 228
+Q(ace used for)-.1 E F1 -.18(re)2.5 G(ad \255e).18 E F0(.)A F1(xtrace)
+184 240 Q F0(Same as)224 240 Q F1<ad78>2.5 E F0(.)A(If)184 258 Q F1
+<ad6f>3.053 E F0 .553(is supplied with no)3.053 F F2(option\255name)
+3.053 E F0 3.053(,t)C .553(he v)-3.053 F .552
+(alues of the current options are printed.)-.25 F(If)5.552 E F1(+o)184
+270 Q F0 1.071(is supplied with no)3.571 F F2(option\255name)3.571 E F0
+3.571(,as)C 1.071(eries of)-3.571 F F1(set)3.572 E F0 1.072
+(commands to recreate the current)3.572 F
+(option settings is displayed on the standard output.)184 282 Q F1<ad70>
+144 294 Q F0 -.45(Tu)184 294 S 1.072(rn on).45 F F2(privile)4.822 E -.1
+(ge)-.4 G(d).1 E F0 3.572(mode. In)4.342 F 1.072(this mode, the)3.572 F
+F3($ENV)3.572 E F0(and)3.322 E F3($B)3.572 E(ASH_ENV)-.27 E F0 1.071
+(\214les are not pro-)3.322 F 1.5
+(cessed, shell functions are not inherited from the en)184 306 R 1.501
+(vironment, and the)-.4 F F3(SHELLOPTS)4.001 E/F4 9/Times-Roman@0 SF(,)A
+F3 -.27(BA)184 318 S(SHOPTS).27 E F4(,)A F3(CDP)2.775 E -.855(AT)-.666 G
+(H).855 E F4(,)A F0(and)2.775 E F3(GLOBIGNORE)3.025 E F0 -.25(va)2.775 G
+.524(riables, if the).25 F 3.024(ya)-.15 G .524(ppear in the en)-3.024 F
+(vironment,)-.4 E .379(are ignored.)184 330 R .379
+(If the shell is started with the ef)5.379 F(fecti)-.25 E .679 -.15
+(ve u)-.25 H .38(ser \(group\) id not equal to the real).15 F .462
+(user \(group\) id, and the)184 342 R F1<ad70>2.961 E F0 .461
+(option is not supplied, these actions are tak)2.961 F .461
+(en and the ef)-.1 F(fec-)-.25 E(ti)184 354 Q .694 -.15(ve u)-.25 H .394
+(ser id is set to the real user id.).15 F .395(If the)5.395 F F1<ad70>
+2.895 E F0 .395(option is supplied at startup, the ef)2.895 F(fecti)-.25
+E -.15(ve)-.25 G .387(user id is not reset.)184 366 R -.45(Tu)5.387 G
+.387(rning this option of).45 F 2.886(fc)-.25 G .386(auses the ef)-2.886
+F(fecti)-.25 E .686 -.15(ve u)-.25 H .386(ser and group ids to be).15 F
+(set to the real user and group ids.)184 378 Q F1<ad74>144 390 Q F0
+(Exit after reading and e)184 390 Q -.15(xe)-.15 G(cuting one command.)
+.15 E F1<ad75>144 402 Q F0 -.35(Tr)184 402 S .043(eat unset v).35 F .044
+(ariables and parameters other than the special parameters "@" and "*" \
+as an)-.25 F .183(error when performing parameter e)184 414 R 2.683
+(xpansion. If)-.15 F -.15(ex)2.683 G .182
+(pansion is attempted on an unset v).15 F(ari-)-.25 E .746
+(able or parameter)184 426 R 3.246(,t)-.4 G .746
+(he shell prints an error message, and, if not interacti)-3.246 F -.15
+(ve)-.25 G 3.246(,e).15 G .746(xits with a)-3.396 F(non-zero status.)184
+438 Q F1<ad76>144 450 Q F0(Print shell input lines as the)184 450 Q 2.5
+(ya)-.15 G(re read.)-2.5 E F1<ad78>144 462 Q F0 .315(After e)184 462 R
+.315(xpanding each)-.15 F F2 .315(simple command)2.815 F F0(,)A F1 -.25
+(fo)2.815 G(r).25 E F0(command,)2.815 E F1(case)2.815 E F0(command,)
+2.815 E F1(select)2.815 E F0(command,)2.815 E 1.235(or arithmetic)184
+474 R F1 -.25(fo)3.736 G(r).25 E F0 1.236(command, display the e)3.736 F
+1.236(xpanded v)-.15 F 1.236(alue of)-.25 F F3(PS4)3.736 E F4(,)A F0
+(follo)3.486 E 1.236(wed by the com-)-.25 F(mand and its e)184 486 Q
+(xpanded ar)-.15 E(guments or associated w)-.18 E(ord list.)-.1 E F1
+<ad42>144 498 Q F0 1.206(The shell performs brace e)184 498 R 1.206
+(xpansion \(see)-.15 F F1 1.205(Brace Expansion)3.705 F F0(abo)3.705 E
+-.15(ve)-.15 G 3.705(\). This).15 F 1.205(is on by de-)3.705 F -.1(fa)
+184 510 S(ult.).1 E F1<ad43>144 522 Q F0 .213(If set,)184 522 R F1(bash)
+2.713 E F0 .213(does not o)2.713 F -.15(ve)-.15 G .214(rwrite an e).15 F
+.214(xisting \214le with the)-.15 F F1(>)2.714 E F0(,)A F1(>&)2.714 E F0
+2.714(,a)C(nd)-2.714 E F1(<>)2.714 E F0 .214(redirection opera-)2.714 F
+3.054(tors. This)184 534 R .553(may be o)3.053 F -.15(ve)-.15 G .553
+(rridden when creating output \214les by using the redirection opera-)
+.15 F(tor)184 546 Q F1(>|)2.5 E F0(instead of)2.5 E F1(>)2.5 E F0(.)A F1
+<ad45>144 558 Q F0 .103(If set, an)184 558 R 2.603(yt)-.15 G .103
+(rap on)-2.603 F F1(ERR)2.603 E F0 .104
+(is inherited by shell functions, command substitutions, and com-)2.603
+F .839(mands e)184 570 R -.15(xe)-.15 G .839(cuted in a subshell en).15
+F 3.339(vironment. The)-.4 F F1(ERR)3.338 E F0 .838
+(trap is normally not inherited in)3.338 F(such cases.)184 582 Q F1
+<ad48>144 594 Q F0(Enable)184 594 Q F1(!)3.031 E F0 .531
+(style history substitution.)5.531 F .531(This option is on by def)5.531
+F .532(ault when the shell is inter)-.1 F(-)-.2 E(acti)184 606 Q -.15
+(ve)-.25 G(.).15 E F1<ad50>144 618 Q F0 .96
+(If set, the shell does not resolv)184 618 R 3.459(es)-.15 G .959
+(ymbolic links when e)-3.459 F -.15(xe)-.15 G .959
+(cuting commands such as).15 F F1(cd)3.459 E F0 1.452
+(that change the current w)184 630 R 1.452(orking directory)-.1 F 6.452
+(.I)-.65 G 3.953(tu)-6.452 G 1.453(ses the ph)-3.953 F 1.453
+(ysical directory structure in-)-.05 F 3.335(stead. By)184 642 R(def)
+3.335 E(ault,)-.1 E F1(bash)3.334 E F0(follo)3.334 E .834
+(ws the logical chain of directories when performing com-)-.25 F
+(mands which change the current directory)184 654 Q(.)-.65 E F1<ad54>144
+666 Q F0 .89(If set, an)184 666 R 3.39(yt)-.15 G .89(raps on)-3.39 F F1
+(DEB)3.39 E(UG)-.1 E F0(and)3.39 E F1(RETURN)3.39 E F0 .89
+(are inherited by shell functions, command)3.39 F 1.932
+(substitutions, and commands e)184 678 R -.15(xe)-.15 G 1.932
+(cuted in a subshell en).15 F 4.432(vironment. The)-.4 F F1(DEB)4.432 E
+(UG)-.1 E F0(and)4.432 E F1(RETURN)184 690 Q F0
+(traps are normally not inherited in such cases.)2.5 E F1<adad>144 702 Q
+F0 .4(If no ar)184 702 R .401(guments follo)-.18 F 2.901(wt)-.25 G .401
+(his option, then the positional parameters are unset.)-2.901 F
+(Otherwise,)5.401 E(the positional parameters are set to the)184 714 Q
+F2(ar)2.5 E(g)-.37 E F0(s, e)A -.15(ve)-.25 G 2.5(ni).15 G 2.5(fs)-2.5 G
+(ome of them be)-2.5 E(gin with a)-.15 E F1<ad>2.5 E F0(.)A
+(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(72)190.395 E 0 Cg EP
+%%Page: 73 73
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF<ad>144 84 Q F0 .797(Signal the end of options, cause all remaining)
+184 84 R/F2 10/Times-Italic@0 SF(ar)3.297 E(g)-.37 E F0 3.297(st)C 3.297
+(ob)-3.297 G 3.296(ea)-3.297 G .796(ssigned to the positional pa-)-3.296
+F 3.021(rameters. The)184 96 R F1<ad78>3.021 E F0(and)3.022 E F1<ad76>
+3.022 E F0 .522(options are turned of)3.022 F 3.022(f. If)-.25 F .522
+(there are no)3.022 F F2(ar)3.022 E(g)-.37 E F0 .522
+(s, the positional pa-)B(rameters remain unchanged.)184 108 Q .425
+(The options are of)144 124.8 R 2.925(fb)-.25 G 2.925(yd)-2.925 G(ef)
+-2.925 E .425(ault unless otherwise noted.)-.1 F .425
+(Using + rather than \255 causes these options)5.425 F .177
+(to be turned of)144 136.8 R 2.677(f. The)-.25 F .178
+(options can also be speci\214ed as ar)2.678 F .178(guments to an in)
+-.18 F -.2(vo)-.4 G .178(cation of the shell.).2 F(The)5.178 E .066
+(current set of options may be found in)144 148.8 R F1<24ad>2.566 E F0
+5.066(.T)C .066(he return status is al)-5.066 F -.1(wa)-.1 G .066
+(ys true unless an in).1 F -.25(va)-.4 G .066(lid option).25 F
+(is encountered.)144 160.8 Q F1(shift)108 177.6 Q F0([)2.5 E F2(n)A F0
+(])A .428(The positional parameters from)144 189.6 R F2(n)2.928 E F0
+.429(+1 ... are renamed to)B F1 .429($1 ....)2.929 F F0 -.15(Pa)5.429 G
+.429(rameters represented by the num-).15 F(bers)144 201.6 Q F1($#)2.583
+E F0(do)2.583 E .083(wn to)-.25 F F1($#)2.583 E F0<ad>A F2(n)A F0 .083
+(+1 are unset.)B F2(n)5.443 E F0 .083(must be a non-ne)2.823 F -.05(ga)
+-.15 G(ti).05 E .382 -.15(ve n)-.25 H .082(umber less than or equal to)
+.15 F F1($#)2.582 E F0 5.082(.I)C(f)-5.082 E F2(n)2.942 E F0 .06
+(is 0, no parameters are changed.)144 213.6 R(If)5.06 E F2(n)2.92 E F0
+.06(is not gi)2.8 F -.15(ve)-.25 G .06(n, it is assumed to be 1.).15 F
+(If)5.06 E F2(n)2.92 E F0 .06(is greater than)2.8 F F1($#)2.56 E F0 2.56
+(,t)C(he)-2.56 E .144(positional parameters are not changed.)144 225.6 R
+.144(The return status is greater than zero if)5.144 F F2(n)3.003 E F0
+.143(is greater than)2.883 F F1($#)2.643 E F0
+(or less than zero; otherwise 0.)144 237.6 Q F1(shopt)108 254.4 Q F0([)
+2.5 E F1(\255pqsu)A F0 2.5(][)C F1<ad6f>-2.5 E F0 2.5(][)C F2(optname)
+-2.5 E F0(...])2.5 E -.8(To)144 266.4 S .639(ggle the v).8 F .639
+(alues of settings controlling optional shell beha)-.25 F(vior)-.2 E
+5.639(.T)-.55 G .64(he settings can be either those)-5.639 F .375
+(listed belo)144 278.4 R 1.675 -.65(w, o)-.25 H 1.175 -.4(r, i).65 H
+2.875(ft).4 G(he)-2.875 E F1<ad6f>2.875 E F0 .375
+(option is used, those a)2.875 F -.25(va)-.2 G .375(ilable with the).25
+F F1<ad6f>2.875 E F0 .374(option to the)2.875 F F1(set)2.874 E F0 -.2
+(bu)2.874 G .374(iltin com-).2 F 2.565(mand. W)144 290.4 R .065
+(ith no options, or with the)-.4 F F1<ad70>2.566 E F0 .066
+(option, a list of all settable options is displayed, with an in-)2.566
+F .074(dication of whether or not each is set; if)144 302.4 R F2
+(optnames)2.574 E F0 .074
+(are supplied, the output is restricted to those op-)2.574 F 3.105
+(tions. The)144 314.4 R F1<ad70>3.105 E F0 .605(option causes output to\
+ be displayed in a form that may be reused as input.)3.105 F(Other)5.605
+E(options ha)144 326.4 Q .3 -.15(ve t)-.2 H(he follo).15 E
+(wing meanings:)-.25 E F1<ad73>144 338.4 Q F0(Enable \(set\) each)180
+338.4 Q F2(optname)2.5 E F0(.)A F1<ad75>144 350.4 Q F0
+(Disable \(unset\) each)180 350.4 Q F2(optname)2.5 E F0(.)A F1<ad71>144
+362.4 Q F0 .003(Suppresses normal output \(quiet mode\); the return sta\
+tus indicates whether the)180 362.4 R F2(optname)2.503 E F0(is)2.503 E
+.255(set or unset.)180 374.4 R .255(If multiple)5.255 F F2(optname)2.755
+E F0(ar)2.755 E .256(guments are gi)-.18 F -.15(ve)-.25 G 2.756(nw).15 G
+(ith)-2.756 E F1<ad71>2.756 E F0 2.756(,t)C .256
+(he return status is zero if)-2.756 F(all)180 386.4 Q F2(optnames)2.5 E
+F0(are enabled; non-zero otherwise.)2.5 E F1<ad6f>144 398.4 Q F0
+(Restricts the v)180 398.4 Q(alues of)-.25 E F2(optname)2.5 E F0
+(to be those de\214ned for the)2.5 E F1<ad6f>2.5 E F0(option to the)2.5
+E F1(set)2.5 E F0 -.2(bu)2.5 G(iltin.).2 E .625(If either)144 415.2 R F1
+<ad73>3.125 E F0(or)3.124 E F1<ad75>3.124 E F0 .624(is used with no)
+3.124 F F2(optname)3.124 E F0(ar)3.124 E(guments,)-.18 E F1(shopt)3.124
+E F0(sho)3.124 E .624(ws only those options which are)-.25 F .983
+(set or unset, respecti)144 427.2 R -.15(ve)-.25 G(ly).15 E 5.983(.U)
+-.65 G .983(nless otherwise noted, the)-5.983 F F1(shopt)3.484 E F0 .984
+(options are disabled \(unset\) by de-)3.484 F -.1(fa)144 439.2 S(ult.)
+.1 E 1.544(The return status when listing options is zero if all)144 456
+R F2(optnames)4.044 E F0 1.544(are enabled, non-zero otherwise.)4.044 F
+.696
+(When setting or unsetting options, the return status is zero unless an)
+144 468 R F2(optname)3.196 E F0 .696(is not a v)3.196 F .696(alid shell)
+-.25 F(option.)144 480 Q(The list of)144 496.8 Q F1(shopt)2.5 E F0
+(options is:)2.5 E F1(assoc_expand_once)144 514.8 Q F0 1.945
+(If set, the shell suppresses multiple e)184 526.8 R -.25(va)-.25 G
+1.944(luation of associati).25 F 2.244 -.15(ve a)-.25 H 1.944
+(rray subscripts during).15 F .885(arithmetic e)184 538.8 R .885
+(xpression e)-.15 F -.25(va)-.25 G .885(luation, while e).25 F -.15(xe)
+-.15 G .885(cuting b).15 F .885(uiltins that can perform v)-.2 F .885
+(ariable as-)-.25 F(signments, and while e)184 550.8 Q -.15(xe)-.15 G
+(cuting b).15 E(uiltins that perform array dereferencing.)-.2 E F1
+(autocd)144 562.8 Q F0 .2
+(If set, a command name that is the name of a directory is e)184 562.8 R
+-.15(xe)-.15 G .199(cuted as if it were the ar).15 F(gu-)-.18 E
+(ment to the)184 574.8 Q F1(cd)2.5 E F0 2.5(command. This)2.5 F
+(option is only used by interacti)2.5 E .3 -.15(ve s)-.25 H(hells.).15 E
+F1(cdable_v)144 586.8 Q(ars)-.1 E F0 .155(If set, an ar)184 598.8 R .155
+(gument to the)-.18 F F1(cd)2.655 E F0 -.2(bu)2.655 G .156
+(iltin command that is not a directory is assumed to be the).2 F
+(name of a v)184 610.8 Q(ariable whose v)-.25 E
+(alue is the directory to change to.)-.25 E F1(cdspell)144 622.8 Q F0
+1.055
+(If set, minor errors in the spelling of a directory component in a)184
+622.8 R F1(cd)3.555 E F0 1.055(command will be)3.555 F 3.987
+(corrected. The)184 634.8 R 1.487(errors check)3.987 F 1.487
+(ed for are transposed characters, a missing character)-.1 F 3.988(,a)
+-.4 G(nd)-3.988 E .77(one character too man)184 646.8 R 4.57 -.65(y. I)
+-.15 H 3.27(fac).65 G .77
+(orrection is found, the corrected \214lename is printed, and)-3.27 F
+(the command proceeds.)184 658.8 Q
+(This option is only used by interacti)5 E .3 -.15(ve s)-.25 H(hells.)
+.15 E F1(checkhash)144 670.8 Q F0 .736(If set,)184 682.8 R F1(bash)3.236
+E F0 .736(checks that a command found in the hash table e)3.236 F .737
+(xists before trying to e)-.15 F -.15(xe)-.15 G(-).15 E(cute it.)184
+694.8 Q(If a hashed command no longer e)5 E
+(xists, a normal path search is performed.)-.15 E F1(checkjobs)144 706.8
+Q F0 .449(If set,)184 718.8 R F1(bash)2.949 E F0 .449
+(lists the status of an)2.949 F 2.949(ys)-.15 G .448
+(topped and running jobs before e)-2.949 F .448(xiting an interacti)-.15
+F -.15(ve)-.25 G 3.438(shell. If)184 730.8 R(an)3.438 E 3.438(yj)-.15 G
+.938(obs are running, this causes the e)-3.438 F .938
+(xit to be deferred until a second e)-.15 F .939(xit is)-.15 F
+(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(73)190.395 E 0 Cg EP
+%%Page: 74 74
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E .817
+(attempted without an interv)184 84 R .817(ening command \(see)-.15 F/F1
+9/Times-Bold@0 SF .816(JOB CONTR)3.316 F(OL)-.27 E F0(abo)3.066 E -.15
+(ve)-.15 G 3.316(\). The).15 F .816(shell al-)3.316 F -.1(wa)184 96 S
+(ys postpones e).1 E(xiting if an)-.15 E 2.5(yj)-.15 G(obs are stopped.)
+-2.5 E/F2 10/Times-Bold@0 SF(checkwinsize)144 108 Q F0 1.09(If set,)184
+120 R F2(bash)3.59 E F0 1.09(checks the windo)3.59 F 3.59(ws)-.25 G 1.09
+(ize after each e)-3.59 F 1.09(xternal \(non-b)-.15 F 1.09
+(uiltin\) command and, if)-.2 F(necessary)184 132 Q 3.351(,u)-.65 G .851
+(pdates the v)-3.351 F .85(alues of)-.25 F F1(LINES)3.35 E F0(and)3.1 E
+F1(COLUMNS)3.35 E/F3 9/Times-Roman@0 SF(.)A F0 .85
+(This option is enabled by de-)5.35 F -.1(fa)184 144 S(ult.).1 E F2
+(cmdhist)144 156 Q F0 .172(If set,)184 156 R F2(bash)2.672 E F0 .172
+(attempts to sa)2.672 F .472 -.15(ve a)-.2 H .173
+(ll lines of a multiple-line command in the same history en-).15 F(try)
+184 168 Q 5.597(.T)-.65 G .597(his allo)-5.597 F .597
+(ws easy re-editing of multi-line commands.)-.25 F .597
+(This option is enabled by de-)5.597 F -.1(fa)184 180 S 1.287(ult, b).1
+F 1.288(ut only has an ef)-.2 F 1.288
+(fect if command history is enabled, as described abo)-.25 F 1.588 -.15
+(ve u)-.15 H(nder).15 E F1(HIST)184 192 Q(OR)-.162 E(Y)-.315 E F3(.)A F2
+(compat31)144 204 Q(compat32)144 216 Q(compat40)144 228 Q(compat41)144
+240 Q(compat42)144 252 Q(compat43)144 264 Q(compat44)144 276 Q F0 .889
+(These control aspects of the shell')184 288 R 3.389(sc)-.55 G .889
+(ompatibility mode \(see)-3.389 F F1 .889(SHELL COMP)3.389 F -.855(AT)
+-.666 G(IBILITY).855 E(MODE)184 300 Q F0(belo)2.25 E(w\).)-.25 E F2
+(complete_fullquote)144 316.8 Q F0 .653(If set,)184 328.8 R F2(bash)
+3.153 E F0 .653(quotes all shell metacharacters in \214lenames and dire\
+ctory names when per)3.153 F(-)-.2 E 1.525(forming completion.)184 340.8
+R 1.524(If not set,)6.525 F F2(bash)4.024 E F0(remo)4.024 E -.15(ve)-.15
+G 4.024(sm).15 G 1.524(etacharacters such as the dollar sign)-4.024 F
+2.667(from the set of characters that will be quoted in completed \214l\
+enames when these)184 352.8 R .029(metacharacters appear in shell v)184
+364.8 R .028(ariable references in w)-.25 F .028(ords to be completed.)
+-.1 F .028(This means)5.028 F 1.072(that dollar signs in v)184 376.8 R
+1.073(ariable names that e)-.25 F 1.073
+(xpand to directories will not be quoted; ho)-.15 F(w-)-.25 E -2.15 -.25
+(ev e)184 388.8 T 1.923 -.4(r, a).25 H 1.423 -.15(ny d).4 H 1.123
+(ollar signs appearing in \214lenames will not be quoted, either).15 F
+6.123(.T)-.55 G 1.122(his is acti)-6.123 F -.15(ve)-.25 G .59
+(only when bash is using backslashes to quote completed \214lenames.)184
+400.8 R .59(This v)5.59 F .59(ariable is set)-.25 F(by def)184 412.8 Q
+(ault, which is the def)-.1 E(ault bash beha)-.1 E(vior in v)-.2 E
+(ersions through 4.2.)-.15 E F2(dir)144 429.6 Q(expand)-.18 E F0 .487
+(If set,)184 441.6 R F2(bash)2.987 E F0 .486
+(replaces directory names with the results of w)2.986 F .486(ord e)-.1 F
+.486(xpansion when perform-)-.15 F .179(ing \214lename completion.)184
+453.6 R .179(This changes the contents of the readline editing b)5.179 F
+(uf)-.2 E(fer)-.25 E 5.18(.I)-.55 G 2.68(fn)-5.18 G(ot)-2.68 E(set,)184
+465.6 Q F2(bash)2.5 E F0(attempts to preserv)2.5 E 2.5(ew)-.15 G
+(hat the user typed.)-2.5 E F2(dirspell)144 482.4 Q F0 .859(If set,)184
+482.4 R F2(bash)3.359 E F0 .858
+(attempts spelling correction on directory names during w)3.359 F .858
+(ord completion if)-.1 F
+(the directory name initially supplied does not e)184 494.4 Q(xist.)-.15
+E F2(dotglob)144 511.2 Q F0 .165(If set,)184 511.2 R F2(bash)2.665 E F0
+.165(includes \214lenames be)2.665 F .165(ginning with a `.)-.15 F 2.665
+('i)-.7 G 2.665(nt)-2.665 G .165(he results of pathname e)-2.665 F
+(xpansion.)-.15 E(The \214lenames)184 523.2 Q F2 -.63(``)2.5 G -.55(.')
+.63 G(')-.08 E F0(and)5 E F2 -.63(``)2.5 G(..).63 E -.63('')-.55 G F0
+(must al)5.63 E -.1(wa)-.1 G(ys be matched e).1 E(xplicitly)-.15 E 2.5
+(,e)-.65 G -.15(ve)-2.75 G 2.5(ni).15 G(f)-2.5 E F2(dotglob)2.5 E F0
+(is set.)2.5 E F2(execfail)144 540 Q F0 .517(If set, a non-interacti)184
+540 R .817 -.15(ve s)-.25 H .517(hell will not e).15 F .516
+(xit if it cannot e)-.15 F -.15(xe)-.15 G .516
+(cute the \214le speci\214ed as an ar).15 F(-)-.2 E(gument to the)184
+552 Q F2(exec)2.5 E F0 -.2(bu)2.5 G(iltin command.).2 E(An interacti)5 E
+.3 -.15(ve s)-.25 H(hell does not e).15 E(xit if)-.15 E F2(exec)2.5 E F0
+-.1(fa)2.5 G(ils.).1 E F2(expand_aliases)144 568.8 Q F0 .716
+(If set, aliases are e)184 580.8 R .717(xpanded as described abo)-.15 F
+1.017 -.15(ve u)-.15 H(nder).15 E F1(ALIASES)3.217 E F3(.)A F0 .717
+(This option is enabled)5.217 F(by def)184 592.8 Q(ault for interacti)
+-.1 E .3 -.15(ve s)-.25 H(hells.).15 E F2(extdeb)144 609.6 Q(ug)-.2 E F0
+.17(If set at shell in)184 621.6 R -.2(vo)-.4 G .17
+(cation, or in a shell startup \214le, arrange to e).2 F -.15(xe)-.15 G
+.17(cute the deb).15 F .17(ugger pro\214le)-.2 F 1.081
+(before the shell starts, identical to the)184 633.6 R F2<adad646562>
+3.582 E(ugger)-.2 E F0 3.582(option. If)3.582 F 1.082(set after in)3.582
+F -.2(vo)-.4 G 1.082(cation, be-).2 F(ha)184 645.6 Q
+(vior intended for use by deb)-.2 E(uggers is enabled:)-.2 E F2(1.)184
+662.4 Q F0(The)220 662.4 Q F2<ad46>4.251 E F0 1.751(option to the)4.251
+F F2(declar)4.251 E(e)-.18 E F0 -.2(bu)4.251 G 1.751
+(iltin displays the source \214le name and line).2 F
+(number corresponding to each function name supplied as an ar)220 674.4
+Q(gument.)-.18 E F2(2.)184 691.2 Q F0 1.667(If the command run by the)
+220 691.2 R F2(DEB)4.167 E(UG)-.1 E F0 1.667(trap returns a non-zero v)
+4.167 F 1.667(alue, the ne)-.25 F(xt)-.15 E
+(command is skipped and not e)220 703.2 Q -.15(xe)-.15 G(cuted.).15 E
+(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(74)190.395 E 0 Cg EP
+%%Page: 75 75
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(3.)184 84 Q F0 .841(If the command run by the)220 84 R F1(DEB)3.341 E
+(UG)-.1 E F0 .841(trap returns a v)3.341 F .84
+(alue of 2, and the shell is)-.25 F -.15(exe)220 96 S .488
+(cuting in a subroutine \(a shell function or a shell script e).15 F
+-.15(xe)-.15 G .488(cuted by the).15 F F1(.)2.988 E F0(or)2.988 E F1
+(sour)220 108 Q(ce)-.18 E F0 -.2(bu)2.5 G
+(iltins\), the shell simulates a call to).2 E F1 -.18(re)2.5 G(tur).18 E
+(n)-.15 E F0(.)A F1(4.)184 124.8 Q/F2 9/Times-Bold@0 SF -.27(BA)220
+124.8 S(SH_ARGC).27 E F0(and)3.154 E F2 -.27(BA)3.404 G(SH_ARGV).27 E F0
+.904(are updated as described in their descriptions)3.154 F(abo)220
+136.8 Q -.15(ve)-.15 G(.).15 E F1(5.)184 153.6 Q F0 1.637(Function trac\
+ing is enabled: command substitution, shell functions, and sub-)220
+153.6 R(shells in)220 165.6 Q -.2(vo)-.4 G -.1(ke).2 G 2.5(dw).1 G(ith)
+-2.5 E F1(\()2.5 E/F3 10/Times-Italic@0 SF(command)2.5 E F1(\))2.5 E F0
+(inherit the)2.5 E F1(DEB)2.5 E(UG)-.1 E F0(and)2.5 E F1(RETURN)2.5 E F0
+(traps.)2.5 E F1(6.)184 182.4 Q F0 1.082(Error tracing is enabled: comm\
+and substitution, shell functions, and subshells)220 182.4 R(in)220
+194.4 Q -.2(vo)-.4 G -.1(ke).2 G 2.5(dw).1 G(ith)-2.5 E F1(\()2.5 E F3
+(command)2.5 E F1(\))2.5 E F0(inherit the)2.5 E F1(ERR)2.5 E F0(trap.)
+2.5 E F1(extglob)144 211.2 Q F0 .4(If set, the e)184 211.2 R .4
+(xtended pattern matching features described abo)-.15 F .7 -.15(ve u)
+-.15 H(nder).15 E F1 -.1(Pa)2.9 G .4(thname Expan-).1 F(sion)184 223.2 Q
+F0(are enabled.)2.5 E F1(extquote)144 240 Q F0 .86(If set,)184 252 R F1
+($)3.36 E F0<08>A F3(string)A F0 3.36<0861>C(nd)-3.36 E F1($)3.36 E F0
+(")A F3(string)A F0 3.36("q)C .86(uoting is performed within)-3.36 F F1
+(${)3.36 E F3(par)A(ameter)-.15 E F1(})A F0 -.15(ex)3.36 G .86
+(pansions en-).15 F(closed in double quotes.)184 264 Q
+(This option is enabled by def)5 E(ault.)-.1 E F1(failglob)144 280.8 Q
+F0 .242(If set, patterns which f)184 280.8 R .243
+(ail to match \214lenames during pathname e)-.1 F .243
+(xpansion result in an e)-.15 F(x-)-.15 E(pansion error)184 292.8 Q(.)
+-.55 E F1 -.25(fo)144 309.6 S -.18(rc).25 G(e_\214gnor).18 E(e)-.18 E F0
+.937(If set, the suf)184 321.6 R<8c78>-.25 E .936(es speci\214ed by the)
+-.15 F F2(FIGNORE)3.436 E F0 .936(shell v)3.186 F .936(ariable cause w)
+-.25 F .936(ords to be ignored)-.1 F .32(when performing w)184 333.6 R
+.32(ord completion e)-.1 F -.15(ve)-.25 G 2.82(ni).15 G 2.82(ft)-2.82 G
+.32(he ignored w)-2.82 F .32(ords are the only possible com-)-.1 F 2.948
+(pletions. See)184 345.6 R F2 .448(SHELL V)2.948 F(ARIABLES)-1.215 E F0
+(abo)2.698 E .748 -.15(ve f)-.15 H .448(or a description of).15 F F2
+(FIGNORE)2.947 E/F4 9/Times-Roman@0 SF(.)A F0 .447(This option is)4.947
+F(enabled by def)184 357.6 Q(ault.)-.1 E F1(globasciiranges)144 374.4 Q
+F0 2.518(If set, range e)184 386.4 R 2.519
+(xpressions used in pattern matching brack)-.15 F 2.519(et e)-.1 F 2.519
+(xpressions \(see)-.15 F F2 -.09(Pa)5.019 G(tter).09 E(n)-.135 E
+(Matching)184 398.4 Q F0(abo)2.965 E -.15(ve)-.15 G 3.215(\)b).15 G(eha)
+-3.215 E 1.015 -.15(ve a)-.2 H 3.214(si).15 G 3.214(fi)-3.214 G 3.214
+(nt)-3.214 G .714(he traditional C locale when performing comparisons.)
+-3.214 F 1.02(That is, the current locale')184 410.4 R 3.52(sc)-.55 G
+1.02(ollating sequence is not tak)-3.52 F 1.02(en into account, so)-.1 F
+F1(b)3.52 E F0 1.02(will not)3.52 F .957(collate between)184 422.4 R F1
+(A)3.457 E F0(and)3.457 E F1(B)3.457 E F0 3.457(,a)C .957(nd upper)
+-3.457 F .957(-case and lo)-.2 F(wer)-.25 E .956
+(-case ASCII characters will collate)-.2 F(together)184 434.4 Q(.)-.55 E
+F1(globstar)144 451.2 Q F0 .518(If set, the pattern)184 451.2 R F1(**)
+3.018 E F0 .519(used in a pathname e)3.019 F .519(xpansion conte)-.15 F
+.519(xt will match all \214les and zero)-.15 F .432
+(or more directories and subdirectories.)184 463.2 R .431
+(If the pattern is follo)5.432 F .431(wed by a)-.25 F F1(/)2.931 E F0
+2.931(,o)C .431(nly directories)-2.931 F(and subdirectories match.)184
+475.2 Q F1(gnu_errfmt)144 492 Q F0(If set, shell error messages are wri\
+tten in the standard GNU error message format.)184 504 Q F1(histappend)
+144 520.8 Q F0 .676
+(If set, the history list is appended to the \214le named by the v)184
+532.8 R .676(alue of the)-.25 F F2(HISTFILE)3.177 E F0 -.25(va)2.927 G
+(ri-).25 E(able when the shell e)184 544.8 Q(xits, rather than o)-.15 E
+-.15(ve)-.15 G(rwriting the \214le.).15 E F1(histr)144 561.6 Q(eedit)
+-.18 E F0 .576(If set, and)184 573.6 R F1 -.18(re)3.076 G(adline).18 E
+F0 .575(is being used, a user is gi)3.076 F -.15(ve)-.25 G 3.075(nt).15
+G .575(he opportunity to re-edit a f)-3.075 F .575(ailed his-)-.1 F
+(tory substitution.)184 585.6 Q F1(histv)144 602.4 Q(erify)-.1 E F0 .402
+(If set, and)184 614.4 R F1 -.18(re)2.903 G(adline).18 E F0 .403
+(is being used, the results of history substitution are not immediately)
+2.903 F .662(passed to the shell parser)184 626.4 R 5.662(.I)-.55 G .661
+(nstead, the resulting line is loaded into the)-5.662 F F1 -.18(re)3.161
+G(adline).18 E F0(editing)3.161 E -.2(bu)184 638.4 S -.25(ff).2 G(er).25
+E 2.5(,a)-.4 G(llo)-2.5 E(wing further modi\214cation.)-.25 E F1
+(hostcomplete)144 655.2 Q F0 1.181(If set, and)184 667.2 R F1 -.18(re)
+3.681 G(adline).18 E F0 1.181(is being used,)3.681 F F1(bash)3.682 E F0
+1.182(will attempt to perform hostname completion)3.682 F 1.381
+(when a w)184 679.2 R 1.381(ord containing a)-.1 F F1(@)3.881 E F0 1.381
+(is being completed \(see)3.881 F F1(Completing)3.88 E F0(under)3.88 E
+F2(READLINE)3.88 E F0(abo)184 691.2 Q -.15(ve)-.15 G 2.5(\). This).15 F
+(is enabled by def)2.5 E(ault.)-.1 E(GNU Bash 5.1)72 768 Q
+(2020 October 29)141.235 E(75)190.395 E 0 Cg EP
+%%Page: 76 76
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(huponexit)144 84 Q F0(If set,)184 96 Q F1(bash)2.5 E F0(will send)2.5
+E/F2 9/Times-Bold@0 SF(SIGHUP)2.5 E F0(to all jobs when an interacti)
+2.25 E .3 -.15(ve l)-.25 H(ogin shell e).15 E(xits.)-.15 E F1
+(inherit_err)144 112.8 Q(exit)-.18 E F0 .219
+(If set, command substitution inherits the v)184 124.8 R .219
+(alue of the)-.25 F F1(err)2.719 E(exit)-.18 E F0 .22
+(option, instead of unsetting)2.719 F(it in the subshell en)184 136.8 Q
+2.5(vironment. This)-.4 F(option is enabled when)2.5 E/F3 10
+/Times-Italic@0 SF(posix mode)2.5 E F0(is enabled.)2.5 E F1(interacti)
+144 153.6 Q -.1(ve)-.1 G(_comments).1 E F0 .33(If set, allo)184 165.6 R
+2.83(waw)-.25 G .33(ord be)-2.93 F .33(ginning with)-.15 F F1(#)2.83 E
+F0 .33(to cause that w)2.83 F .33(ord and all remaining characters on)
+-.1 F .967(that line to be ignored in an interacti)184 177.6 R 1.267
+-.15(ve s)-.25 H .967(hell \(see).15 F F2(COMMENTS)3.467 E F0(abo)3.217
+E -.15(ve)-.15 G 3.467(\). This).15 F .968(option is)3.468 F
+(enabled by def)184 189.6 Q(ault.)-.1 E F1(lastpipe)144 206.4 Q F0 .066
+(If set, and job control is not acti)184 206.4 R -.15(ve)-.25 G 2.566
+(,t).15 G .066(he shell runs the last command of a pipeline not e)-2.566
+F -.15(xe)-.15 G(-).15 E
+(cuted in the background in the current shell en)184 218.4 Q(vironment.)
+-.4 E F1(lithist)144 235.2 Q F0 .654(If set, and the)184 235.2 R F1
+(cmdhist)3.154 E F0 .654(option is enabled, multi-line commands are sa)
+3.154 F -.15(ve)-.2 G 3.155(dt).15 G 3.155(ot)-3.155 G .655(he history)
+-3.155 F(with embedded ne)184 247.2 Q
+(wlines rather than using semicolon separators where possible.)-.25 E F1
+(localv)144 264 Q(ar_inherit)-.1 E F0 .422(If set, local v)184 276 R
+.422(ariables inherit the v)-.25 F .422(alue and attrib)-.25 F .422
+(utes of a v)-.2 F .422(ariable of the same name that)-.25 F -.15(ex)184
+288 S .173(ists at a pre).15 F .173(vious scope before an)-.25 F 2.673
+(yn)-.15 G .673 -.25(ew va)-2.673 H .173(lue is assigned.).25 F .174
+(The nameref attrib)5.174 F .174(ute is not)-.2 F(inherited.)184 300 Q
+F1(localv)144 316.8 Q(ar_unset)-.1 E F0 .329(If set, calling)184 328.8 R
+F1(unset)2.829 E F0 .329(on local v)2.829 F .329(ariables in pre)-.25 F
+.328(vious function scopes marks them so subse-)-.25 F .543(quent looku\
+ps \214nd them unset until that function returns. This is identical to \
+the beha)184 340.8 R(v-)-.2 E(ior of unsetting local v)184 352.8 Q
+(ariables at the current function scope.)-.25 E F1(login_shell)144 369.6
+Q F0 .486
+(The shell sets this option if it is started as a login shell \(see)184
+381.6 R F2(INV)2.986 E(OCA)-.405 E(TION)-.855 E F0(abo)2.736 E -.15(ve)
+-.15 G 2.986(\). The).15 F -.25(va)184 393.6 S(lue may not be changed.)
+.25 E F1(mailwar)144 410.4 Q(n)-.15 E F0 .814(If set, and a \214le that)
+184 422.4 R F1(bash)3.314 E F0 .815
+(is checking for mail has been accessed since the last time it)3.314 F
+-.1(wa)184 434.4 S 2.5(sc).1 G(heck)-2.5 E(ed, the message `)-.1 E
+(`The mail in)-.74 E F3(mail\214le)2.5 E F0(has been read')2.5 E 2.5('i)
+-.74 G 2.5(sd)-2.5 G(isplayed.)-2.5 E F1(no_empty_cmd_completion)144
+451.2 Q F0 .325(If set, and)184 463.2 R F1 -.18(re)2.825 G(adline).18 E
+F0 .325(is being used,)2.825 F F1(bash)2.824 E F0 .324
+(will not attempt to search the)2.824 F F2 -.666(PA)2.824 G(TH)-.189 E
+F0 .324(for possible)2.574 F
+(completions when completion is attempted on an empty line.)184 475.2 Q
+F1(nocaseglob)144 492 Q F0 .436(If set,)184 504 R F1(bash)2.936 E F0
+.436(matches \214lenames in a case\255insensiti)2.936 F .737 -.15(ve f)
+-.25 H .437(ashion when performing pathname).05 F -.15(ex)184 516 S
+(pansion \(see).15 E F1 -.1(Pa)2.5 G(thname Expansion).1 E F0(abo)2.5 E
+-.15(ve)-.15 G(\).).15 E F1(nocasematch)144 532.8 Q F0 1.194(If set,)184
+544.8 R F1(bash)3.694 E F0 1.194
+(matches patterns in a case\255insensiti)3.694 F 1.493 -.15(ve f)-.25 H
+1.193(ashion when performing matching).05 F .551(while e)184 556.8 R
+-.15(xe)-.15 G(cuting).15 E F1(case)3.051 E F0(or)3.051 E F1([[)3.051 E
+F0 .551(conditional commands, when performing pattern substitution)3.051
+F -.1(wo)184 568.8 S .623(rd e).1 F .623(xpansions, or when \214ltering\
+ possible completions as part of programmable com-)-.15 F(pletion.)184
+580.8 Q F1(nullglob)144 597.6 Q F0 .854(If set,)184 609.6 R F1(bash)
+3.354 E F0(allo)3.354 E .855(ws patterns which match no \214les \(see)
+-.25 F F1 -.1(Pa)3.355 G .855(thname Expansion).1 F F0(abo)3.355 E -.15
+(ve)-.15 G 3.355(\)t).15 G(o)-3.355 E -.15(ex)184 621.6 S
+(pand to a null string, rather than themselv).15 E(es.)-.15 E F1(pr)144
+638.4 Q(ogcomp)-.18 E F0 .677(If set, the programmable completion f)184
+650.4 R .677(acilities \(see)-.1 F F1(Pr)3.176 E .676
+(ogrammable Completion)-.18 F F0(abo)3.176 E -.15(ve)-.15 G(\)).15 E
+(are enabled.)184 662.4 Q(This option is enabled by def)5 E(ault.)-.1 E
+F1(pr)144 679.2 Q(ogcomp_alias)-.18 E F0 2.124
+(If set, and programmable completion is enabled,)184 691.2 R F1(bash)
+4.624 E F0 2.124(treats a command name that)4.624 F(doesn')184 703.2 Q
+3.289(th)-.18 G -2.25 -.2(av e)-3.289 H(an)3.489 E 3.289(yc)-.15 G .789
+(ompletions as a possible alias and attempts alias e)-3.289 F .788
+(xpansion. If it has)-.15 F 1.473(an alias,)184 715.2 R F1(bash)3.973 E
+F0 1.473(attempts programmable completion using the command w)3.973 F
+1.473(ord resulting)-.1 F(from the e)184 727.2 Q(xpanded alias.)-.15 E
+(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(76)190.395 E 0 Cg EP
+%%Page: 77 77
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(pr)144 84 Q(omptv)-.18 E(ars)-.1 E F0 1.448
+(If set, prompt strings under)184 96 R 1.448(go parameter e)-.18 F 1.447
+(xpansion, command substitution, arithmetic)-.15 F -.15(ex)184 108 S .17
+(pansion, and quote remo).15 F -.25(va)-.15 G 2.67(la).25 G .17
+(fter being e)-2.67 F .17(xpanded as described in)-.15 F/F2 9
+/Times-Bold@0 SF(PR)2.671 E(OMPTING)-.27 E F0(abo)2.421 E -.15(ve)-.15 G
+(.).15 E(This option is enabled by def)184 120 Q(ault.)-.1 E F1 -.18(re)
+144 136.8 S(stricted_shell).18 E F0 1.069
+(The shell sets this option if it is started in restricted mode \(see)
+184 148.8 R F2 1.069(RESTRICTED SHELL)3.569 F F0(belo)184 160.8 Q 2.86
+(w\). The)-.25 F -.25(va)2.86 G .36(lue may not be changed.).25 F .36
+(This is not reset when the startup \214les are e)5.36 F -.15(xe)-.15 G
+(-).15 E(cuted, allo)184 172.8 Q(wing the startup \214les to disco)-.25
+E -.15(ve)-.15 G 2.5(rw).15 G(hether or not a shell is restricted.)-2.5
+E F1(shift_v)144 189.6 Q(erbose)-.1 E F0 .502(If set, the)184 201.6 R F1
+(shift)3.002 E F0 -.2(bu)3.002 G .501
+(iltin prints an error message when the shift count e).2 F .501
+(xceeds the number)-.15 F(of positional parameters.)184 213.6 Q F1(sour)
+144 230.4 Q(cepath)-.18 E F0 .77(If set, the)184 242.4 R F1(sour)3.27 E
+(ce)-.18 E F0(\()3.27 E F1(.)A F0 3.27(\)b)C .77(uiltin uses the v)-3.47
+F .771(alue of)-.25 F F2 -.666(PA)3.271 G(TH)-.189 E F0 .771
+(to \214nd the directory containing the)3.021 F
+(\214le supplied as an ar)184 254.4 Q 2.5(gument. This)-.18 F
+(option is enabled by def)2.5 E(ault.)-.1 E F1(xpg_echo)144 271.2 Q F0
+(If set, the)184 283.2 Q F1(echo)2.5 E F0 -.2(bu)2.5 G(iltin e).2 E
+(xpands backslash-escape sequences by def)-.15 E(ault.)-.1 E F1(suspend)
+108 300 Q F0([)2.5 E F1<ad66>A F0(])A 1.002(Suspend the e)144 312 R -.15
+(xe)-.15 G 1.002(cution of this shell until it recei).15 F -.15(ve)-.25
+G 3.501(sa).15 G F2(SIGCONT)A F0 3.501(signal. A)3.251 F 1.001
+(login shell cannot be)3.501 F .022(suspended; the)144 324 R F1<ad66>
+2.522 E F0 .022(option can be used to o)2.522 F -.15(ve)-.15 G .022
+(rride this and force the suspension.).15 F .023(The return status is)
+5.023 F 2.5(0u)144 336 S(nless the shell is a login shell and)-2.5 E F1
+<ad66>2.5 E F0(is not supplied, or if job control is not enabled.)2.5 E
+F1(test)108 352.8 Q/F3 10/Times-Italic@0 SF -.2(ex)2.5 G(pr).2 E F1([)
+108 364.8 Q F3 -.2(ex)2.5 G(pr).2 E F1(])2.5 E F0 .878
+(Return a status of 0 \(true\) or 1 \(f)144 364.8 R .877
+(alse\) depending on the e)-.1 F -.25(va)-.25 G .877
+(luation of the conditional e).25 F(xpression)-.15 E F3 -.2(ex)144 376.8
+S(pr).2 E F0 5.53(.E).73 G .53
+(ach operator and operand must be a separate ar)-5.53 F 3.03
+(gument. Expressions)-.18 F .53(are composed of the)3.03 F 1.361
+(primaries described abo)144 388.8 R 1.661 -.15(ve u)-.15 H(nder).15 E
+F2(CONDITION)3.861 E 1.36(AL EXPRESSIONS)-.18 F/F4 9/Times-Roman@0 SF(.)
+A F1(test)5.86 E F0 1.36(does not accept an)3.86 F 3.86(yo)-.15 G(p-)
+-3.86 E(tions, nor does it accept and ignore an ar)144 400.8 Q
+(gument of)-.18 E F1<adad>2.5 E F0(as signifying the end of options.)2.5
+E .785(Expressions may be combined using the follo)144 418.8 R .786
+(wing operators, listed in decreasing order of prece-)-.25 F 3.412
+(dence. The)144 430.8 R -.25(eva)3.412 G .912
+(luation depends on the number of ar).25 F .911(guments; see belo)-.18 F
+4.711 -.65(w. O)-.25 H .911(perator precedence is).65 F
+(used when there are \214v)144 442.8 Q 2.5(eo)-.15 G 2.5(rm)-2.5 G
+(ore ar)-2.5 E(guments.)-.18 E F1(!)144 454.8 Q F3 -.2(ex)2.5 G(pr).2 E
+F0 -.35(Tr)180 454.8 S(ue if).35 E F3 -.2(ex)2.5 G(pr).2 E F0(is f)3.23
+E(alse.)-.1 E F1(\()144 466.8 Q F3 -.2(ex)2.5 G(pr).2 E F1(\))2.5 E F0
+.26(Returns the v)180 466.8 R .26(alue of)-.25 F F3 -.2(ex)2.76 G(pr).2
+E F0 5.26(.T)C .26(his may be used to o)-5.26 F -.15(ve)-.15 G .26
+(rride the normal precedence of opera-).15 F(tors.)180 478.8 Q F3 -.2
+(ex)144 490.8 S(pr1).2 E F0<ad>2.5 E F1(a)A F3 -.2(ex)2.5 G(pr2).2 E F0
+-.35(Tr)180 502.8 S(ue if both).35 E F3 -.2(ex)2.5 G(pr1).2 E F0(and)2.5
+E F3 -.2(ex)2.5 G(pr2).2 E F0(are true.)2.52 E F3 -.2(ex)144 514.8 S
+(pr1).2 E F0<ad>2.5 E F1(o)A F3 -.2(ex)2.5 G(pr2).2 E F0 -.35(Tr)180
+526.8 S(ue if either).35 E F3 -.2(ex)2.5 G(pr1).2 E F0(or)2.5 E F3 -.2
+(ex)2.5 G(pr2).2 E F0(is true.)2.52 E F1(test)144 543.6 Q F0(and)2.5 E
+F1([)2.5 E F0 -.25(eva)2.5 G(luate conditional e).25 E
+(xpressions using a set of rules based on the number of ar)-.15 E
+(guments.)-.18 E 2.5(0a)144 561.6 S -.18(rg)-2.5 G(uments).18 E(The e)
+180 573.6 Q(xpression is f)-.15 E(alse.)-.1 E 2.5(1a)144 585.6 S -.18
+(rg)-2.5 G(ument).18 E(The e)180 597.6 Q
+(xpression is true if and only if the ar)-.15 E(gument is not null.)-.18
+E 2.5(2a)144 609.6 S -.18(rg)-2.5 G(uments).18 E .37(If the \214rst ar)
+180 621.6 R .37(gument is)-.18 F F1(!)2.87 E F0 2.87(,t)C .37(he e)-2.87
+F .37(xpression is true if and only if the second ar)-.15 F .37
+(gument is null.)-.18 F .379(If the \214rst ar)180 633.6 R .38
+(gument is one of the unary conditional operators listed abo)-.18 F .68
+-.15(ve u)-.15 H(nder).15 E F2(CONDI-)2.88 E(TION)180 645.6 Q .553
+(AL EXPRESSIONS)-.18 F F4(,)A F0 .552(the e)2.802 F .552
+(xpression is true if the unary test is true.)-.15 F .552
+(If the \214rst ar)5.552 F(gu-)-.18 E(ment is not a v)180 657.6 Q
+(alid unary conditional operator)-.25 E 2.5(,t)-.4 G(he e)-2.5 E
+(xpression is f)-.15 E(alse.)-.1 E 2.5(3a)144 669.6 S -.18(rg)-2.5 G
+(uments).18 E .236(The follo)180 681.6 R .236
+(wing conditions are applied in the order listed.)-.25 F .236
+(If the second ar)5.236 F .236(gument is one of)-.18 F .855
+(the binary conditional operators listed abo)180 693.6 R 1.155 -.15
+(ve u)-.15 H(nder).15 E F2(CONDITION)3.355 E .855(AL EXPRESSIONS)-.18 F
+F4(,)A F0(the)3.104 E .578(result of the e)180 705.6 R .578(xpression i\
+s the result of the binary test using the \214rst and third ar)-.15 F
+(guments)-.18 E 1.333(as operands.)180 717.6 R(The)6.333 E F1<ad61>3.833
+E F0(and)3.833 E F1<ad6f>3.832 E F0 1.332
+(operators are considered binary operators when there are)3.832 F .558
+(three ar)180 729.6 R 3.058(guments. If)-.18 F .558(the \214rst ar)3.058
+F .558(gument is)-.18 F F1(!)3.058 E F0 3.058(,t)C .558(he v)-3.058 F
+.558(alue is the ne)-.25 F -.05(ga)-.15 G .558(tion of the tw).05 F
+(o-ar)-.1 E(gument)-.18 E(GNU Bash 5.1)72 768 Q(2020 October 29)141.235
+E(77)190.395 E 0 Cg EP
+%%Page: 78 78
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E .521
+(test using the second and third ar)180 84 R 3.021(guments. If)-.18 F
+.521(the \214rst ar)3.021 F .52(gument is e)-.18 F(xactly)-.15 E/F1 10
+/Times-Bold@0 SF(\()3.02 E F0 .52(and the third)3.02 F(ar)180 96 Q .485
+(gument is e)-.18 F(xactly)-.15 E F1(\))2.985 E F0 2.985(,t)C .485
+(he result is the one-ar)-2.985 F .485(gument test of the second ar)-.18
+F 2.985(gument. Other)-.18 F(-)-.2 E(wise, the e)180 108 Q
+(xpression is f)-.15 E(alse.)-.1 E 2.5(4a)144 120 S -.18(rg)-2.5 G
+(uments).18 E .385(If the \214rst ar)180 132 R .385(gument is)-.18 F F1
+(!)2.885 E F0 2.885(,t)C .385(he result is the ne)-2.885 F -.05(ga)-.15
+G .384(tion of the three-ar).05 F .384(gument e)-.18 F .384
+(xpression com-)-.15 F .284(posed of the remaining ar)180 144 R 2.784
+(guments. Otherwise,)-.18 F .284(the e)2.784 F .284
+(xpression is parsed and e)-.15 F -.25(va)-.25 G .285(luated ac-).25 F
+(cording to precedence using the rules listed abo)180 156 Q -.15(ve)-.15
+G(.).15 E 2.5(5o)144 168 S 2.5(rm)-2.5 G(ore ar)-2.5 E(guments)-.18 E
+1.635(The e)180 180 R 1.635(xpression is parsed and e)-.15 F -.25(va)
+-.25 G 1.635(luated according to precedence using the rules listed).25 F
+(abo)180 192 Q -.15(ve)-.15 G(.).15 E(When used with)144 210 Q F1(test)
+2.5 E F0(or)2.5 E F1([)2.5 E F0 2.5(,t)C(he)-2.5 E F1(<)2.5 E F0(and)2.5
+E F1(>)2.5 E F0(operators sort le)2.5 E
+(xicographically using ASCII ordering.)-.15 E F1(times)108 226.8 Q F0
+1.229(Print the accumulated user and system times for the shell and for\
+ processes run from the shell.)144 226.8 R(The return status is 0.)144
+238.8 Q F1(trap)108 255.6 Q F0([)2.5 E F1(\255lp)A F0 2.5(][)C([)-2.5 E
+/F2 10/Times-Italic@0 SF(ar)A(g)-.37 E F0(])A F2(sigspec)2.5 E F0(...])
+2.5 E .683(The command)144 267.6 R F2(ar)3.513 E(g)-.37 E F0 .683
+(is to be read and e)3.403 F -.15(xe)-.15 G .682
+(cuted when the shell recei).15 F -.15(ve)-.25 G 3.182(ss).15 G
+(ignal\(s\))-3.182 E F2(sigspec)3.522 E F0 5.682(.I).31 G(f)-5.682 E F2
+(ar)3.512 E(g)-.37 E F0(is)3.402 E .608(absent \(and there is a single)
+144 279.6 R F2(sigspec)3.108 E F0 3.108(\)o)C(r)-3.108 E F1<ad>3.108 E
+F0 3.108(,e)C .608
+(ach speci\214ed signal is reset to its original disposition)-3.108 F
+.659(\(the v)144 291.6 R .659(alue it had upon entrance to the shell\).)
+-.25 F(If)5.658 E F2(ar)3.488 E(g)-.37 E F0 .658
+(is the null string the signal speci\214ed by each)3.378 F F2(sigspec)
+144.34 303.6 Q F0 .58(is ignored by the shell and by the commands it in)
+3.39 F -.2(vo)-.4 G -.1(ke).2 G 3.081(s. If).1 F F2(ar)3.411 E(g)-.37 E
+F0 .581(is not present and)3.301 F F1<ad70>3.081 E F0(has)3.081 E 1.215
+(been supplied, then the trap commands associated with each)144 315.6 R
+F2(sigspec)4.054 E F0 1.214(are displayed.)4.024 F 1.214(If no ar)6.214
+F(gu-)-.18 E .86(ments are supplied or if only)144 327.6 R F1<ad70>3.36
+E F0 .86(is gi)3.36 F -.15(ve)-.25 G(n,).15 E F1(trap)3.36 E F0 .86
+(prints the list of commands associated with each)3.36 F 2.83
+(signal. The)144 339.6 R F1<ad6c>2.83 E F0 .33(option causes the shell \
+to print a list of signal names and their corresponding num-)2.83 F 4.31
+(bers. Each)144 351.6 R F2(sigspec)4.65 E F0 1.811
+(is either a signal name de\214ned in <)4.62 F F2(signal.h)A F0 1.811
+(>, or a signal number)B 6.811(.S)-.55 G(ignal)-6.811 E
+(names are case insensiti)144 363.6 Q .3 -.15(ve a)-.25 H(nd the).15 E
+/F3 9/Times-Bold@0 SF(SIG)2.5 E F0(pre\214x is optional.)2.25 E .667
+(If a)144 381.6 R F2(sigspec)3.507 E F0(is)3.477 E F3(EXIT)3.167 E F0
+.667(\(0\) the command)2.917 F F2(ar)3.496 E(g)-.37 E F0 .666(is e)3.386
+F -.15(xe)-.15 G .666(cuted on e).15 F .666(xit from the shell.)-.15 F
+.666(If a)5.666 F F2(sigspec)3.506 E F0(is)3.476 E F3(DE-)3.166 E -.09
+(BU)144 393.6 S(G).09 E/F4 9/Times-Roman@0 SF(,)A F0 .483(the command)
+2.733 F F2(ar)3.313 E(g)-.37 E F0 .483(is e)3.203 F -.15(xe)-.15 G .484
+(cuted before e).15 F -.15(ve)-.25 G(ry).15 E F2 .484(simple command)
+2.984 F F0(,)A F2(for)2.984 E F0(command,)2.984 E F2(case)2.984 E F0
+(command,)2.984 E F2(select)144 405.6 Q F0 .563(command, e)3.063 F -.15
+(ve)-.25 G .563(ry arithmetic).15 F F2(for)3.063 E F0 .563
+(command, and before the \214rst command e)3.063 F -.15(xe)-.15 G .562
+(cutes in a shell).15 F .622(function \(see)144 417.6 R F3 .622
+(SHELL GRAMMAR)3.122 F F0(abo)2.872 E -.15(ve)-.15 G 3.122(\). Refer).15
+F .622(to the description of the)3.122 F F1(extdeb)3.122 E(ug)-.2 E F0
+.622(option to the)3.122 F F1(shopt)144 429.6 Q F0 -.2(bu)2.996 G .496
+(iltin for details of its ef).2 F .496(fect on the)-.25 F F1(DEB)2.996 E
+(UG)-.1 E F0 2.996(trap. If)2.996 F(a)2.996 E F2(sigspec)3.336 E F0(is)
+3.306 E F3(RETURN)2.996 E F4(,)A F0 .496(the command)2.746 F F2(ar)
+144.33 441.6 Q(g)-.37 E F0 .18(is e)2.9 F -.15(xe)-.15 G .18
+(cuted each time a shell function or a script e).15 F -.15(xe)-.15 G .18
+(cuted with the).15 F F1(.)2.68 E F0(or)2.68 E F1(sour)2.68 E(ce)-.18 E
+F0 -.2(bu)2.68 G .18(iltins \214nishes).2 F -.15(exe)144 453.6 S
+(cuting.).15 E .961(If a)144 471.6 R F2(sigspec)3.801 E F0(is)3.771 E F3
+(ERR)3.461 E F4(,)A F0 .961(the command)3.211 F F2(ar)3.791 E(g)-.37 E
+F0 .961(is e)3.681 F -.15(xe)-.15 G .961(cuted whene).15 F -.15(ve)-.25
+G 3.461(ra).15 G .96(pipeline \(which may consist of a)-.001 F .185(sin\
+gle simple command\), a list, or a compound command returns a non\255ze\
+ro e)144 483.6 R .185(xit status, subject to)-.15 F .452(the follo)144
+495.6 R .452(wing conditions.)-.25 F(The)5.452 E F3(ERR)2.952 E F0 .451
+(trap is not e)2.701 F -.15(xe)-.15 G .451(cuted if the f).15 F .451
+(ailed command is part of the com-)-.1 F .387
+(mand list immediately follo)144 507.6 R .387(wing a)-.25 F F1(while)
+2.887 E F0(or)2.887 E F1(until)2.888 E F0 -.1(ke)2.888 G(yw)-.05 E .388
+(ord, part of the test in an)-.1 F F2(if)2.898 E F0 .388
+(statement, part)4.848 F .778(of a command e)144 519.6 R -.15(xe)-.15 G
+.778(cuted in a).15 F F1(&&)3.278 E F0(or)3.278 E F1(||)3.278 E F0 .778
+(list e)3.278 F .778(xcept the command follo)-.15 F .778
+(wing the \214nal)-.25 F F1(&&)3.278 E F0(or)3.278 E F1(||)3.277 E F0
+3.277(,a)C -.15(ny)-3.277 G 1.28(command in a pipeline b)144 531.6 R
+1.28(ut the last, or if the command')-.2 F 3.78(sr)-.55 G 1.28(eturn v)
+-3.78 F 1.28(alue is being in)-.25 F -.15(ve)-.4 G 1.28(rted using).15 F
+F1(!)3.78 E F0(.)A(These are the same conditions obe)144 543.6 Q
+(yed by the)-.15 E F1(err)2.5 E(exit)-.18 E F0(\()2.5 E F1<ad65>A F0 2.5
+(\)o)C(ption.)-2.5 E .133
+(Signals ignored upon entry to the shell cannot be trapped or reset.)144
+561.6 R -.35(Tr)5.132 G .132(apped signals that are not be-).35 F .117
+(ing ignored are reset to their original v)144 573.6 R .117
+(alues in a subshell or subshell en)-.25 F .117
+(vironment when one is cre-)-.4 F 2.5(ated. The)144 585.6 R
+(return status is f)2.5 E(alse if an)-.1 E(y)-.15 E F2(sigspec)2.84 E F0
+(is in)2.81 E -.25(va)-.4 G(lid; otherwise).25 E F1(trap)2.5 E F0
+(returns true.)2.5 E F1(type)108 602.4 Q F0([)2.5 E F1(\255aftpP)A F0(])
+A F2(name)2.5 E F0([)2.5 E F2(name)A F0(...])2.5 E -.4(Wi)144 614.4 S
+.174(th no options, indicate ho).4 F 2.674(we)-.25 G(ach)-2.674 E F2
+(name)3.034 E F0 -.1(wo)2.854 G .173
+(uld be interpreted if used as a command name.).1 F .173(If the)5.173 F
+F1<ad74>144 626.4 Q F0 .715(option is used,)3.215 F F1(type)3.215 E F0
+.715(prints a string which is one of)3.215 F F2(alias)3.545 E F0(,).27 E
+F2 -.1(ke)3.215 G(ywor)-.2 E(d)-.37 E F0(,).77 E F2(function)5.185 E F0
+(,).24 E F2 -.2(bu)3.215 G(iltin).2 E F0 3.215(,o).24 G(r)-3.215 E F2
+(\214le)5.125 E F0(if)3.395 E F2(name)144.36 638.4 Q F0 .087
+(is an alias, shell reserv)2.767 F .087(ed w)-.15 F .087
+(ord, function, b)-.1 F .086(uiltin, or disk \214le, respecti)-.2 F -.15
+(ve)-.25 G(ly).15 E 5.086(.I)-.65 G 2.586(ft)-5.086 G(he)-2.586 E F2
+(name)2.946 E F0 .086(is not)2.766 F .118
+(found, then nothing is printed, and an e)144 650.4 R .118
+(xit status of f)-.15 F .118(alse is returned.)-.1 F .119(If the)5.119 F
+F1<ad70>2.619 E F0 .119(option is used,)2.619 F F1(type)2.619 E F0 .855
+(either returns the name of the disk \214le that w)144 662.4 R .855
+(ould be e)-.1 F -.15(xe)-.15 G .855(cuted if).15 F F2(name)3.715 E F0
+.855(were speci\214ed as a com-)3.535 F .528(mand name, or nothing if)
+144 674.4 R/F5 10/Courier@0 SF .528(type -t name)3.028 F F0 -.1(wo)3.028
+G .528(uld not return).1 F F2(\214le)4.938 E F0 5.528(.T).18 G(he)-5.528
+E F1<ad50>3.028 E F0 .529(option forces a)3.028 F F3 -.666(PA)3.029 G
+(TH)-.189 E F0 .007(search for each)144 686.4 R F2(name)2.507 E F0 2.507
+(,e)C -.15(ve)-2.757 G 2.507(ni).15 G(f)-2.507 E F5 .007(type -t name)
+2.507 F F0 -.1(wo)2.507 G .007(uld not return).1 F F2(\214le)4.417 E F0
+5.006(.I).18 G 2.506(fac)-5.006 G .006(ommand is hashed,)-2.506 F F1
+<ad70>2.506 E F0(and)144 698.4 Q F1<ad50>3.23 E F0 .73
+(print the hashed v)3.23 F .731
+(alue, which is not necessarily the \214le that appears \214rst in)-.25
+F F3 -.666(PA)3.231 G(TH)-.189 E F4(.)A F0 .731(If the)5.231 F F1<ad61>
+144 710.4 Q F0 .824(option is used,)3.324 F F1(type)3.324 E F0 .824
+(prints all of the places that contain an e)3.324 F -.15(xe)-.15 G .823
+(cutable named).15 F F2(name)3.683 E F0 5.823(.T).18 G .823(his in-)
+-5.823 F 1.176(cludes aliases and functions, if and only if the)144
+722.4 R F1<ad70>3.676 E F0 1.176(option is not also used.)3.676 F 1.177
+(The table of hashed)6.176 F(GNU Bash 5.1)72 768 Q(2020 October 29)
+141.235 E(78)190.395 E 0 Cg EP
+%%Page: 79 79
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E 1.223
+(commands is not consulted when using)144 84 R/F1 10/Times-Bold@0 SF
+<ad61>3.723 E F0 6.223(.T)C(he)-6.223 E F1<ad66>3.723 E F0 1.223
+(option suppresses shell function lookup, as)3.723 F .325(with the)144
+96 R F1(command)2.825 E F0 -.2(bu)2.825 G(iltin.).2 E F1(type)5.325 E F0
+.325(returns true if all of the ar)2.825 F .326(guments are found, f)
+-.18 F .326(alse if an)-.1 F 2.826(ya)-.15 G .326(re not)-2.826 F
+(found.)144 108 Q F1(ulimit)108 124.8 Q F0([)2.5 E F1(\255HS)A F0(])A F1
+<ad61>2.5 E(ulimit)108 136.8 Q F0([)2.5 E F1(\255HS)A F0 2.5(][)C F1
+(\255bcde\214klmnpqrstuvxPR)-2.5 E(T)-.4 E F0([)2.5 E/F2 10
+/Times-Italic@0 SF(limit)A F0(]])A(Pro)144 148.8 Q .244(vides control o)
+-.15 F -.15(ve)-.15 G 2.744(rt).15 G .244(he resources a)-2.744 F -.25
+(va)-.2 G .244
+(ilable to the shell and to processes started by it, on systems).25 F
+.943(that allo)144 160.8 R 3.443(ws)-.25 G .943(uch control.)-3.443 F
+(The)5.943 E F1<ad48>3.443 E F0(and)3.443 E F1<ad53>3.444 E F0 .944
+(options specify that the hard or soft limit is set for the)3.444 F(gi)
+144 172.8 Q -.15(ve)-.25 G 2.709(nr).15 G 2.709(esource. A)-2.709 F .208
+(hard limit cannot be increased by a non-root user once it is set; a so\
+ft limit may)2.709 F .425(be increased up to the v)144 184.8 R .425
+(alue of the hard limit.)-.25 F .426(If neither)5.425 F F1<ad48>2.926 E
+F0(nor)2.926 E F1<ad53>2.926 E F0 .426
+(is speci\214ed, both the soft and)2.926 F .139(hard limits are set.)144
+196.8 R .139(The v)5.139 F .139(alue of)-.25 F F2(limit)2.729 E F0 .139
+(can be a number in the unit speci\214ed for the resource or one)3.319 F
+.741(of the special v)144 208.8 R(alues)-.25 E F1(hard)3.241 E F0(,)A F1
+(soft)3.241 E F0 3.241(,o)C(r)-3.241 E F1(unlimited)3.241 E F0 3.241(,w)
+C .741(hich stand for the current hard limit, the current)-3.241 F .024
+(soft limit, and no limit, respecti)144 220.8 R -.15(ve)-.25 G(ly).15 E
+5.023(.I)-.65 G(f)-5.023 E F2(limit)2.613 E F0 .023
+(is omitted, the current v)3.203 F .023
+(alue of the soft limit of the re-)-.25 F .984
+(source is printed, unless the)144 232.8 R F1<ad48>3.484 E F0 .984
+(option is gi)3.484 F -.15(ve)-.25 G 3.484(n. When).15 F .985
+(more than one resource is speci\214ed, the)3.484 F .7
+(limit name and unit, if appropriate, are printed before the v)144 244.8
+R 3.2(alue. Other)-.25 F .7(options are interpreted as)3.2 F(follo)144
+256.8 Q(ws:)-.25 E F1<ad61>144 268.8 Q F0
+(All current limits are reported; no limits are set)180 268.8 Q F1<ad62>
+144 280.8 Q F0(The maximum sock)180 280.8 Q(et b)-.1 E(uf)-.2 E
+(fer size)-.25 E F1<ad63>144 292.8 Q F0
+(The maximum size of core \214les created)180 292.8 Q F1<ad64>144 304.8
+Q F0(The maximum size of a process')180 304.8 Q 2.5(sd)-.55 G(ata se)
+-2.5 E(gment)-.15 E F1<ad65>144 316.8 Q F0
+(The maximum scheduling priority \("nice"\))180 316.8 Q F1<ad66>144
+328.8 Q F0
+(The maximum size of \214les written by the shell and its children)180
+328.8 Q F1<ad69>144 340.8 Q F0(The maximum number of pending signals)180
+340.8 Q F1<ad6b>144 352.8 Q F0
+(The maximum number of kqueues that may be allocated)180 352.8 Q F1
+<ad6c>144 364.8 Q F0(The maximum size that may be lock)180 364.8 Q
+(ed into memory)-.1 E F1<ad6d>144 376.8 Q F0
+(The maximum resident set size \(man)180 376.8 Q 2.5(ys)-.15 G
+(ystems do not honor this limit\))-2.5 E F1<ad6e>144 388.8 Q F0 .791(Th\
+e maximum number of open \214le descriptors \(most systems do not allo)
+180 388.8 R 3.291(wt)-.25 G .791(his v)-3.291 F .791(alue to)-.25 F
+(be set\))180 400.8 Q F1<ad70>144 412.8 Q F0
+(The pipe size in 512-byte blocks \(this may not be set\))180 412.8 Q F1
+<ad71>144 424.8 Q F0
+(The maximum number of bytes in POSIX message queues)180 424.8 Q F1
+<ad72>144 436.8 Q F0(The maximum real-time scheduling priority)180 436.8
+Q F1<ad73>144 448.8 Q F0(The maximum stack size)180 448.8 Q F1<ad74>144
+460.8 Q F0(The maximum amount of cpu time in seconds)180 460.8 Q F1
+<ad75>144 472.8 Q F0(The maximum number of processes a)180 472.8 Q -.25
+(va)-.2 G(ilable to a single user).25 E F1<ad76>144 484.8 Q F0 .47
+(The maximum amount of virtual memory a)180 484.8 R -.25(va)-.2 G .47
+(ilable to the shell and, on some systems, to).25 F(its children)180
+496.8 Q F1<ad78>144 508.8 Q F0(The maximum number of \214le locks)180
+508.8 Q F1<ad50>144 520.8 Q F0(The maximum number of pseudoterminals)180
+520.8 Q F1<ad52>144 532.8 Q F0(The maximum time a real-time process can\
+ run before blocking, in microseconds)180 532.8 Q F1<ad54>144 544.8 Q F0
+(The maximum number of threads)180 544.8 Q(If)144 561.6 Q F2(limit)3.058
+E F0 .468(is gi)3.648 F -.15(ve)-.25 G .468(n, and the).15 F F1<ad61>
+2.968 E F0 .468(option is not used,)2.968 F F2(limit)2.968 E F0 .468
+(is the ne)2.968 F 2.968(wv)-.25 G .468
+(alue of the speci\214ed resource.)-3.218 F(If)5.468 E .045
+(no option is gi)144 573.6 R -.15(ve)-.25 G .045(n, then).15 F F1<ad66>
+2.545 E F0 .045(is assumed.)2.545 F -1.11(Va)5.045 G .045
+(lues are in 1024-byte increments, e)1.11 F .044(xcept for)-.15 F F1
+<ad74>2.544 E F0 2.544(,w)C .044(hich is)-2.544 F .67(in seconds;)144
+585.6 R F1<ad52>3.17 E F0 3.17(,w)C .67(hich is in microseconds;)-3.17 F
+F1<ad70>3.17 E F0 3.17(,w)C .67(hich is in units of 512-byte blocks;)
+-3.17 F F1<ad50>3.17 E F0(,)A F1<ad54>3.17 E F0(,)A F1<ad62>3.17 E F0(,)
+A F1<ad6b>144 597.6 Q F0(,)A F1<ad6e>3.737 E F0 3.737(,a)C(nd)-3.737 E
+F1<ad75>3.736 E F0 3.736(,w)C 1.236(hich are unscaled v)-3.736 F 1.236
+(alues; and, when in posix mode,)-.25 F F1<ad63>3.736 E F0(and)3.736 E
+F1<ad66>3.736 E F0 3.736(,w)C 1.236(hich are in)-3.736 F .238
+(512-byte increments.)144 609.6 R .238
+(The return status is 0 unless an in)5.238 F -.25(va)-.4 G .238
+(lid option or ar).25 F .238(gument is supplied, or an)-.18 F
+(error occurs while setting a ne)144 621.6 Q 2.5(wl)-.25 G(imit.)-2.5 E
+F1(umask)108 638.4 Q F0([)2.5 E F1<ad70>A F0 2.5(][)C F1<ad53>-2.5 E F0
+2.5(][)C F2(mode)-2.5 E F0(])A .18
+(The user \214le-creation mask is set to)144 650.4 R F2(mode)3.06 E F0
+5.18(.I).18 G(f)-5.18 E F2(mode)3.06 E F0(be)2.86 E .18
+(gins with a digit, it is interpreted as an octal)-.15 F .066(number; o\
+therwise it is interpreted as a symbolic mode mask similar to that acce\
+pted by)144 662.4 R F2 -.15(ch)2.566 G(mod).15 E F0(\(1\).).77 E(If)144
+674.4 Q F2(mode)3.263 E F0 .382(is omitted, the current v)3.063 F .382
+(alue of the mask is printed.)-.25 F(The)5.382 E F1<ad53>2.882 E F0 .382
+(option causes the mask to be)2.882 F .547
+(printed in symbolic form; the def)144 686.4 R .547
+(ault output is an octal number)-.1 F 5.547(.I)-.55 G 3.047(ft)-5.547 G
+(he)-3.047 E F1<ad70>3.047 E F0 .547(option is supplied, and)3.047 F F2
+(mode)144.38 698.4 Q F0 .552
+(is omitted, the output is in a form that may be reused as input.)3.232
+F .551(The return status is 0 if the)5.551 F(mode w)144 710.4 Q
+(as successfully changed or if no)-.1 E F2(mode)2.5 E F0(ar)2.5 E
+(gument w)-.18 E(as supplied, and f)-.1 E(alse otherwise.)-.1 E
+(GNU Bash 5.1)72 768 Q(2020 October 29)141.235 E(79)190.395 E 0 Cg EP
+%%Page: 80 80
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(unalias)108 84 Q F0<5bad>2.5 E F1(a)A F0 2.5(][)C/F2 10
+/Times-Italic@0 SF(name)-2.5 E F0(...])2.5 E(Remo)144 96 Q 1.057 -.15
+(ve e)-.15 H(ach).15 E F2(name)3.257 E F0 .757
+(from the list of de\214ned aliases.)3.257 F(If)5.758 E F1<ad61>3.258 E
+F0 .758(is supplied, all alias de\214nitions are re-)3.258 F(mo)144 108
+Q -.15(ve)-.15 G 2.5(d. The).15 F(return v)2.5 E
+(alue is true unless a supplied)-.25 E F2(name)2.86 E F0
+(is not a de\214ned alias.)2.68 E F1(unset)108 124.8 Q F0<5bad>2.5 E F1
+(fv)A F0 2.5(][)C<ad>-2.5 E F1(n)A F0 2.5(][)C F2(name)-2.5 E F0(...])
+2.5 E -.15(Fo)144 136.8 S 3.804(re).15 G(ach)-3.804 E F2(name)4.164 E F0
+3.804(,r).18 G(emo)-3.804 E 1.604 -.15(ve t)-.15 H 1.304
+(he corresponding v).15 F 1.303(ariable or function.)-.25 F 1.303
+(If the)6.303 F F1<ad76>3.803 E F0 1.303(option is gi)3.803 F -.15(ve)
+-.25 G 1.303(n, each).15 F F2(name)144.36 148.8 Q F0 .464
+(refers to a shell v)3.144 F .464(ariable, and that v)-.25 F .464
+(ariable is remo)-.25 F -.15(ve)-.15 G 2.965(d. Read-only).15 F -.25(va)
+2.965 G .465(riables may not be un-).25 F 2.769(set. If)144 160.8 R F1
+<ad66>2.769 E F0 .269(is speci\214ed, each)2.769 F F2(name)3.129 E F0
+.269(refers to a shell function, and the function de\214nition is remo)
+2.949 F -.15(ve)-.15 G(d.).15 E .403(If the)144 172.8 R F1<ad6e>2.903 E
+F0 .404(option is supplied, and)2.904 F F2(name)2.904 E F0 .404(is a v)
+2.904 F .404(ariable with the)-.25 F F2(namer)2.904 E(ef)-.37 E F0
+(attrib)2.904 E(ute,)-.2 E F2(name)2.904 E F0 .404(will be unset)2.904 F
+.72(rather than the v)144 184.8 R .72(ariable it references.)-.25 F F1
+<ad6e>5.72 E F0 .72(has no ef)3.22 F .719(fect if the)-.25 F F1<ad66>
+3.219 E F0 .719(option is supplied.)3.219 F .719(If no options)5.719 F
+.736(are supplied, each)144 196.8 R F2(name)3.236 E F0 .736
+(refers to a v)3.236 F .737(ariable; if there is no v)-.25 F .737
+(ariable by that name, a function with)-.25 F 1.762(that name, if an)144
+208.8 R 3.062 -.65(y, i)-.15 H 4.262(su).65 G 4.261(nset. Each)-4.262 F
+1.761(unset v)4.261 F 1.761(ariable or function is remo)-.25 F -.15(ve)
+-.15 G 4.261(df).15 G 1.761(rom the en)-4.261 F(vironment)-.4 E 3.171
+(passed to subsequent commands.)144 220.8 R 3.172(If an)8.172 F 5.672
+(yo)-.15 G(f)-5.672 E/F3 9/Times-Bold@0 SF -.27(BA)5.672 G(SH_ALIASES)
+.27 E/F4 9/Times-Roman@0 SF(,)A F3 -.27(BA)5.422 G(SH_ARGV0).27 E F4(,)A
+F3 -.27(BA)5.422 G(SH_CMDS).27 E F4(,)A F3 -.27(BA)144 232.8 S
+(SH_COMMAND).27 E F4(,)A F3 -.27(BA)11.482 G(SH_SUBSHELL).27 E F4(,)A F3
+-.27(BA)11.482 G(SHPID).27 E F4(,)A F3(COMP_W)11.482 E(ORDBREAKS)-.09 E
+F4(,)A F3(DIRST)11.481 E -.495(AC)-.81 G(K).495 E F4(,)A F3(EPOCHREAL)
+144 244.8 Q(TIME)-.828 E F4(,)A F3(EPOCHSECONDS)2.67 E F4(,)A F3(FUNCN)
+2.67 E(AME)-.18 E F4(,)A F3(GR)2.67 E(OUPS)-.27 E F4(,)A F3(HISTCMD)2.67
+E F4(,)A F3(LINENO)2.67 E F4(,)A F3(RANDOM)2.67 E F4(,)A F3(SECONDS)144
+256.8 Q F4(,)A F0(or)4.03 E F3(SRANDOM)4.28 E F0 1.779(are unset, the)
+4.03 F 4.279(yl)-.15 G 1.779(ose their special properties, e)-4.279 F
+-.15(ve)-.25 G 4.279(ni).15 G 4.279(ft)-4.279 G(he)-4.279 E 4.279(ya)
+-.15 G 1.779(re subse-)-4.279 F(quently reset.)144 268.8 Q(The e)5 E
+(xit status is true unless a)-.15 E F2(name)2.86 E F0(is readonly)2.68 E
+(.)-.65 E F1(wait)108 285.6 Q F0([)2.5 E F1(\255fn)A F0 2.5(][)C F1
+<ad70>-2.5 E F2(varname)2.5 E F0 2.5(][)C F2(id ...)-2.5 E F0(])A -.8
+(Wa)144 297.6 S .659(it for each speci\214ed child process and return i\
+ts termination status.).8 F(Each)5.659 E F2(id)3.169 E F0 .659
+(may be a process)3.929 F .009
+(ID or a job speci\214cation; if a job spec is gi)144 309.6 R -.15(ve)
+-.25 G .008(n, all processes in that job').15 F 2.508(sp)-.55 G .008
+(ipeline are w)-2.508 F .008(aited for)-.1 F 5.008(.I)-.55 G(f)-5.008 E
+F2(id)144.01 321.6 Q F0 .441(is not gi)3.711 F -.15(ve)-.25 G(n,).15 E
+F1(wait)2.941 E F0 -.1(wa)2.941 G .441
+(its for all running background jobs and the last-e).1 F -.15(xe)-.15 G
+.442(cuted process substitu-).15 F .598
+(tion, if its process id is the same as)144 333.6 R F1($!)3.098 E F0
+3.098(,a)C .598(nd the return status is zero.)-3.098 F .597(If the)5.597
+F F1<ad6e>3.097 E F0 .597(option is supplied,)3.097 F F1(wait)144 345.6
+Q F0 -.1(wa)3.082 G .583(its for a single job from the list of).1 F F2
+(id)3.083 E F0 3.083(so)C 1.383 -.4(r, i)-3.083 H 3.083(fn).4 G(o)-3.083
+E F2(id)3.083 E F0 3.083(sa)C .583(re supplied, an)-3.083 F 3.083(yj)
+-.15 G .583(ob, to complete and)-3.083 F .404(returns its e)144 357.6 R
+.404(xit status.)-.15 F .403(If none of the supplied ar)5.403 F .403
+(guments is a child of the shell, or if no ar)-.18 F(guments)-.18 E .572
+(are supplied and the shell has no unw)144 369.6 R .573
+(aited-for children, the e)-.1 F .573(xit status is 127.)-.15 F .573
+(If the)5.573 F F1<ad70>3.073 E F0 .573(option is)3.073 F .39
+(supplied, the process or job identi\214er of the job for which the e)
+144 381.6 R .39(xit status is returned is assigned to)-.15 F .905(the v)
+144 393.6 R(ariable)-.25 E F2(varname)3.405 E F0 .905
+(named by the option ar)3.405 F 3.405(gument. The)-.18 F -.25(va)3.405 G
+.905(riable will be unset initially).25 F 3.405(,b)-.65 G(efore)-3.405 E
+(an)144 405.6 Q 3.89(ya)-.15 G 3.89(ssignment. This)-3.89 F 1.39
+(is useful only when the)3.89 F F1<ad6e>3.89 E F0 1.39
+(option is supplied.)3.89 F 1.39(Supplying the)6.39 F F1<ad66>3.89 E F0
+(option,)3.89 E .574(when job control is enabled, forces)144 417.6 R F1
+(wait)3.075 E F0 .575(to w)3.075 F .575(ait for)-.1 F F2(id)3.075 E F0
+.575(to terminate before returning its status, in-)3.075 F .635
+(stead of returning when it changes status.)144 429.6 R(If)5.635 E F2
+(id)3.145 E F0 .635(speci\214es a non-e)3.905 F .635
+(xistent process or job, the return)-.15 F(status is 127.)144 441.6 Q
+(Otherwise, the return status is the e)5 E
+(xit status of the last process or job w)-.15 E(aited for)-.1 E(.)-.55 E
+/F5 10.95/Times-Bold@0 SF(SHELL COMP)72 458.4 Q -1.04(AT)-.81 G
+(IBILITY MODE)1.04 E F0 .911
+(Bash-4.0 introduced the concept of a `shell compatibility le)108 470.4
+R -.15(ve)-.25 G .912(l', speci\214ed as a set of options to the shopt)
+.15 F -.2(bu)108 482.4 S(iltin).2 E F1(compat31)3.378 E F0(,)A F1
+(compat32)3.378 E F0(,)A F1(compat40)3.378 E F0(,)A F1(compat41)3.378 E
+F0 3.378(,a)C .878(nd so on\).)-3.378 F .877
+(There is only one current compatibility)5.878 F(le)108 494.4 Q -.15(ve)
+-.25 G 3.253(l-).15 G 3.253(-e)-3.253 G .753(ach option is mutually e)
+-3.253 F(xclusi)-.15 E -.15(ve)-.25 G 5.753(.T).15 G .753
+(he compatibility le)-5.753 F -.15(ve)-.25 G 3.254(li).15 G 3.254(si)
+-3.254 G .754(ntended to allo)-3.254 F 3.254(wu)-.25 G .754
+(sers to select be-)-3.254 F(ha)108 506.4 Q 1.084(vior from pre)-.2 F
+1.084(vious v)-.25 F 1.083(ersions that is incompatible with ne)-.15 F
+1.083(wer v)-.25 F 1.083(ersions while the)-.15 F 3.583(ym)-.15 G 1.083
+(igrate scripts to use)-3.583 F(current features and beha)108 518.4 Q
+(vior)-.2 E 2.5(.I)-.55 G(t')-2.5 E 2.5(si)-.55 G
+(ntended to be a temporary solution.)-2.5 E 1.456
+(This section does not mention beha)108 535.2 R 1.457
+(vior that is standard for a particular v)-.2 F 1.457
+(ersion \(e.g., setting)-.15 F F1(compat32)3.957 E F0 .887
+(means that quoting the rhs of the re)108 547.2 R(ge)-.15 E .886
+(xp matching operator quotes special re)-.15 F(ge)-.15 E .886
+(xp characters in the w)-.15 F(ord,)-.1 E(which is def)108 559.2 Q
+(ault beha)-.1 E(vior in bash-3.2 and abo)-.2 E -.15(ve)-.15 G(\).).15 E
+.522(If a user enables, say)108 576 R(,)-.65 E F1(compat32)3.023 E F0
+3.023(,i)C 3.023(tm)-3.023 G .523(ay af)-3.023 F .523(fect the beha)-.25
+F .523(vior of other compatibility le)-.2 F -.15(ve)-.25 G .523
+(ls up to and includ-).15 F .26(ing the current compatibility le)108 588
+R -.15(ve)-.25 G 2.76(l. The).15 F .259
+(idea is that each compatibility le)2.759 F -.15(ve)-.25 G 2.759(lc).15
+G .259(ontrols beha)-2.759 F .259(vior that changed)-.2 F 1.645
+(in that v)108 600 R 1.646(ersion of)-.15 F F1(bash)4.146 E F0 4.146(,b)
+C 1.646(ut that beha)-4.346 F 1.646(vior may ha)-.2 F 1.946 -.15(ve b)
+-.2 H 1.646(een present in earlier v).15 F 4.146(ersions. F)-.15 F 1.646
+(or instance, the)-.15 F .761
+(change to use locale-based comparisons with the)108 612 R F1([[)3.261 E
+F0 .76(command came in bash-4.1, and earlier v)3.261 F .76(ersions used)
+-.15 F 1.904(ASCII-based comparisons, so enabling)108 624 R F1(compat32)
+4.404 E F0 1.905(will enable ASCII-based comparisons as well.)4.404 F
+(That)6.905 E .296(granularity may not be suf)108 636 R .296
+(\214cient for all uses, and as a result users should emplo)-.25 F 2.796
+(yc)-.1 G .295(ompatibility le)-2.796 F -.15(ve)-.25 G .295(ls care-).15
+F(fully)108 648 Q 5(.R)-.65 G(ead the documentation for a particular fe\
+ature to \214nd out the current beha)-5 E(vior)-.2 E(.)-.55 E .531
+(Bash-4.3 introduced a ne)108 664.8 R 3.031(ws)-.25 G .531(hell v)-3.031
+F(ariable:)-.25 E F3 -.27(BA)3.031 G(SH_COMP).27 E -.855(AT)-.666 G F4
+(.).855 E F0 .531(The v)5.031 F .531(alue assigned to this v)-.25 F .532
+(ariable \(a decimal)-.25 F -.15(ve)108 676.8 S .108(rsion number lik)
+.15 F 2.608(e4)-.1 G .108(.2, or an inte)-2.608 F .108
+(ger corresponding to the)-.15 F F1(compat)2.607 E F2(NN)A F0 .107
+(option, lik)2.607 F 2.607(e4)-.1 G .107(2\) determines the com-)-2.607
+F(patibility le)108 688.8 Q -.15(ve)-.25 G(l.).15 E .387
+(Starting with bash-4.4, Bash has be)108 705.6 R .388
+(gun deprecating older compatibility le)-.15 F -.15(ve)-.25 G 2.888
+(ls. Ev).15 F(entually)-.15 E 2.888(,t)-.65 G .388(he options will)
+-2.888 F(be remo)108 717.6 Q -.15(ve)-.15 G 2.5(di).15 G 2.5(nf)-2.5 G
+-.2(avo)-2.6 G 2.5(ro).2 G(f)-2.5 E F3 -.27(BA)2.5 G(SH_COMP).27 E -.855
+(AT)-.666 G F4(.).855 E F0(GNU Bash 5.1)72 768 Q(2020 October 29)141.235
+E(80)190.395 E 0 Cg EP
+%%Page: 81 81
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E 1.164
+(Bash-5.0 is the \214nal v)108 84 R 1.164
+(ersion for which there will be an indi)-.15 F 1.163
+(vidual shopt option for the pre)-.25 F 1.163(vious v)-.25 F(ersion.)
+-.15 E(Users should use)108 96 Q/F1 9/Times-Bold@0 SF -.27(BA)2.5 G
+(SH_COMP).27 E -.855(AT)-.666 G F0(on bash-5.0 and later v)3.105 E
+(ersions.)-.15 E 1.613(The follo)108 112.8 R 1.613
+(wing table describes the beha)-.25 F 1.613
+(vior changes controlled by each compatibility le)-.2 F -.15(ve)-.25 G
+4.113(ls).15 G 4.114(etting. The)-4.113 F/F2 10/Times-Bold@0 SF(compat)
+108 124.8 Q/F3 10/Times-Italic@0 SF(NN)A F0 1.186
+(tag is used as shorthand for setting the compatibility le)3.686 F -.15
+(ve)-.25 G 3.686(lt).15 G(o)-3.686 E F3(NN)3.686 E F0 1.186
+(using one of the follo)3.686 F(wing)-.25 E 3.806(mechanisms. F)108
+136.8 R 1.306(or v)-.15 F 1.306
+(ersions prior to bash-5.0, the compatibility le)-.15 F -.15(ve)-.25 G
+3.807(lm).15 G 1.307(ay be set using the corresponding)-3.807 F F2
+(compat)108 148.8 Q F3(NN)A F0 .502(shopt option.)3.002 F -.15(Fo)5.502
+G 3.002(rb).15 G .502(ash-4.3 and later v)-3.002 F .502(ersions, the)
+-.15 F F1 -.27(BA)3.002 G(SH_COMP).27 E -.855(AT)-.666 G F0 -.25(va)
+3.607 G .502(riable is preferred, and it).25 F
+(is required for bash-5.1 and later v)108 160.8 Q(ersions.)-.15 E F2
+(compat31)108 177.6 Q F0<83>144 189.6 Q(quoting the rhs of the)180 189.6
+Q F2([[)2.5 E F0(command')2.5 E 2.5(sr)-.55 G -.15(eg)-2.5 G -.15(ex).15
+G 2.5(pm).15 G(atching operator \(=~\) has no special ef)-2.5 E(fect)
+-.25 E F2(compat32)108 206.4 Q F0<83>144 218.4 Q .35
+(interrupting a command list such as "a ; b ; c" causes the e)180 218.4
+R -.15(xe)-.15 G .35(cution of the ne).15 F .35(xt command)-.15 F .018
+(in the list \(in bash-4.0 and later v)180 230.4 R .018
+(ersions, the shell acts as if it recei)-.15 F -.15(ve)-.25 G 2.517(dt)
+.15 G .017(he interrupt, so in-)-2.517 F
+(terrupting one command in a list aborts the e)180 242.4 Q -.15(xe)-.15
+G(cution of the entire list\)).15 E F2(compat40)108 259.2 Q F0<83>144
+271.2 Q(the)180 271.2 Q F2(<)2.673 E F0(and)2.673 E F2(>)2.673 E F0 .173
+(operators to the)2.673 F F2([[)2.673 E F0 .173
+(command do not consider the current locale when compar)2.673 F(-)-.2 E
+.068(ing strings; the)180 283.2 R 2.568(yu)-.15 G .068
+(se ASCII ordering.)-2.568 F .068(Bash v)5.068 F .067
+(ersions prior to bash-4.1 use ASCII collation)-.15 F(and)180 295.2 Q F3
+(str)4.742 E(cmp)-.37 E F0 1.902
+(\(3\); bash-4.1 and later use the current locale').19 F 4.403(sc)-.55 G
+1.903(ollation sequence and)-4.403 F F3(str)4.743 E(-)-.2 E(coll)180
+307.2 Q F0(\(3\).).51 E F2(compat41)108 324 Q F0<83>144 336 Q(in)180 336
+Q F3(posix)3.79 E F0(mode,)3.79 E F2(time)3.79 E F0 1.29(may be follo)
+3.79 F 1.29(wed by options and still be recognized as a reserv)-.25 F
+(ed)-.15 E -.1(wo)180 348 S(rd \(this is POSIX interpretation 267\)).1 E
+<83>144 360 Q(in)180 360 Q F3(posix)2.708 E F0 .208
+(mode, the parser requires that an e)2.708 F -.15(ve)-.25 G 2.708(nn).15
+G .208(umber of single quotes occur in the)-2.708 F F3(wor)2.709 E(d)
+-.37 E F0 .282(portion of a double-quoted parameter e)180 372 R .282
+(xpansion and treats them specially)-.15 F 2.781(,s)-.65 G 2.781(ot)
+-2.781 G .281(hat charac-)-2.781 F(ters within the single quotes are co\
+nsidered quoted \(this is POSIX interpretation 221\))180 384 Q F2
+(compat42)108 400.8 Q F0<83>144 412.8 Q 1.055(the replacement string in\
+ double-quoted pattern substitution does not under)180 412.8 R 1.056
+(go quote re-)-.18 F(mo)180 424.8 Q -.25(va)-.15 G(l, as it does in v)
+.25 E(ersions after bash-4.2)-.15 E<83>144 436.8 Q .021
+(in posix mode, single quotes are considered special when e)180 436.8 R
+.021(xpanding the)-.15 F F3(wor)2.52 E(d)-.37 E F0 .02(portion of a)2.52
+F .017(double-quoted parameter e)180 448.8 R .017
+(xpansion and can be used to quote a closing brace or other spe-)-.15 F
+.999(cial character \(this is part of POSIX interpretation 221\); in la\
+ter v)180 460.8 R .998(ersions, single quotes)-.15 F
+(are not special within double-quoted w)180 472.8 Q(ord e)-.1 E
+(xpansions)-.15 E F2(compat43)108 489.6 Q F0<83>144 501.6 Q 1.07
+(the shell does not print a w)180 501.6 R 1.071
+(arning message if an attempt is made to use a quoted com-)-.1 F .249
+(pound assignment as an ar)180 513.6 R .248
+(gument to declare \(declare -a foo='\(1 2\)'\). Later v)-.18 F .248
+(ersions w)-.15 F(arn)-.1 E(that this usage is deprecated)180 525.6 Q
+<83>144 537.6 Q -.1(wo)180 537.6 S .5(rd e).1 F .501
+(xpansion errors are considered non-f)-.15 F .501
+(atal errors that cause the current command to)-.1 F -.1(fa)180 549.6 S
+.605(il, e).1 F -.15(ve)-.25 G 3.105(ni).15 G 3.105(np)-3.105 G .605
+(osix mode \(the def)-3.105 F .605(ault beha)-.1 F .605(vior is to mak)
+-.2 F 3.105(et)-.1 G .605(hem f)-3.105 F .605
+(atal errors that cause the)-.1 F(shell to e)180 561.6 Q(xit\))-.15 E
+<83>144 573.6 Q .354(when e)180 573.6 R -.15(xe)-.15 G .354
+(cuting a shell function, the loop state \(while/until/etc.\)).15 F .355
+(is not reset, so)5.354 F F2(br)2.855 E(eak)-.18 E F0(or)2.855 E F2
+(continue)180 585.6 Q F0 .052
+(in that function will break or continue loops in the calling conte)
+2.553 F .052(xt. Bash-4.4 and)-.15 F(later reset the loop state to pre)
+180 597.6 Q -.15(ve)-.25 G(nt this).15 E F2(compat44)108 614.4 Q F0<83>
+144 626.4 Q .719(the shell sets up the v)180 626.4 R .719(alues used by)
+-.25 F F1 -.27(BA)3.219 G(SH_ARGV).27 E F0(and)2.969 E F1 -.27(BA)3.219
+G(SH_ARGC).27 E F0 .719(so the)2.969 F 3.219(yc)-.15 G .719(an e)-3.219
+F(xpand)-.15 E(to the shell')180 638.4 Q 2.5(sp)-.55 G
+(ositional parameters e)-2.5 E -.15(ve)-.25 G 2.5(ni).15 G 2.5(fe)-2.5 G
+(xtended deb)-2.65 E(ugging mode is not enabled)-.2 E<83>144 650.4 Q
+2.635(as)180 650.4 S .135(ubshell inherits loops from its parent conte)
+-2.635 F .135(xt, so)-.15 F F2(br)2.635 E(eak)-.18 E F0(or)2.635 E F2
+(continue)2.634 E F0 .134(will cause the sub-)2.634 F(shell to e)180
+662.4 Q 2.5(xit. Bash-5.0)-.15 F(and later reset the loop state to pre)
+2.5 E -.15(ve)-.25 G(nt the e).15 E(xit)-.15 E<83>144 674.4 Q -.25(va)
+180 674.4 S .618(riable assignments preceding b).25 F .618(uiltins lik)
+-.2 F(e)-.1 E F2(export)3.118 E F0(and)3.118 E F2 -.18(re)3.118 G
+(adonly).18 E F0 .618(that set attrib)3.118 F .619(utes con-)-.2 F .12
+(tinue to af)180 686.4 R .12(fect v)-.25 F .119
+(ariables with the same name in the calling en)-.25 F .119(vironment e)
+-.4 F -.15(ve)-.25 G 2.619(ni).15 G 2.619(ft)-2.619 G .119(he shell is)
+-2.619 F(not in posix mode)180 698.4 Q(GNU Bash 5.1)72 768 Q
+(2020 October 29)141.235 E(81)190.395 E 0 Cg EP
+%%Page: 82 82
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10/Times-Bold@0
+SF(compat50)108 84 Q F0<83>144 96 Q 1.209(Bash-5.1 changed the w)180 96
+R(ay)-.1 E/F2 9/Times-Bold@0 SF($RANDOM)3.709 E F0 1.209
+(is generated to introduce slightly more random-)3.459 F 1.019
+(ness. If the shell compatibility le)180 108 R -.15(ve)-.25 G 3.518(li)
+.15 G 3.518(ss)-3.518 G 1.018(et to 50 or lo)-3.518 F(wer)-.25 E 3.518
+(,i)-.4 G 3.518(tr)-3.518 G -2.15 -.25(ev e)-3.518 H 1.018
+(rts to the method from).25 F .732(bash-5.0 and pre)180 120 R .732
+(vious v)-.25 F .733
+(ersions, so seeding the random number generator by assigning a)-.15 F
+-.25(va)180 132 S(lue to).25 E F2(RANDOM)2.5 E F0
+(will produce the same sequence as in bash-5.0)2.25 E<83>144 144 Q .696
+(If the command hash table is empty)180 144 R 3.196(,b)-.65 G .696
+(ash v)-3.196 F .695(ersions prior to bash-5.1 printed an informa-)-.15
+F 1.32(tional message to that ef)180 156 R 1.321(fect, e)-.25 F -.15(ve)
+-.25 G 3.821(nw).15 G 1.321
+(hen producing output that can be reused as input.)-3.821 F
+(Bash-5.1 suppresses that message when the)180 168 Q F1<ad6c>2.5 E F0
+(option is supplied.)2.5 E/F3 10.95/Times-Bold@0 SF(RESTRICTED SHELL)72
+184.8 Q F0(If)108 196.8 Q F1(bash)3.582 E F0 1.081
+(is started with the name)3.581 F F1(rbash)3.581 E F0 3.581(,o)C 3.581
+(rt)-3.581 G(he)-3.581 E F1<ad72>3.581 E F0 1.081
+(option is supplied at in)3.581 F -.2(vo)-.4 G 1.081
+(cation, the shell becomes re-).2 F 2.976(stricted. A)108 208.8 R .476
+(restricted shell is used to set up an en)2.976 F .476
+(vironment more controlled than the standard shell.)-.4 F .477(It be-)
+5.477 F(ha)108 220.8 Q -.15(ve)-.2 G 2.5(si).15 G(dentically to)-2.5 E
+F1(bash)2.5 E F0(with the e)2.5 E(xception that the follo)-.15 E
+(wing are disallo)-.25 E(wed or not performed:)-.25 E<83>108 237.6 Q
+(changing directories with)144 237.6 Q F1(cd)2.5 E F0<83>108 254.4 Q
+(setting or unsetting the v)144 254.4 Q(alues of)-.25 E F2(SHELL)2.5 E
+/F4 9/Times-Roman@0 SF(,)A F2 -.666(PA)2.25 G(TH)-.189 E F4(,)A F2
+(HISTFILE)2.25 E F4(,)A F2(ENV)2.25 E F4(,)A F0(or)2.25 E F2 -.27(BA)2.5
+G(SH_ENV).27 E F0<83>108 271.2 Q(specifying command names containing)144
+271.2 Q F1(/)2.5 E F0<83>108 288 Q(specifying a \214lename containing a)
+144 288 Q F1(/)2.5 E F0(as an ar)2.5 E(gument to the)-.18 E F1(.)2.5 E
+F0 -.2(bu)5 G(iltin command).2 E<83>108 304.8 Q
+(specifying a \214lename containing a slash as an ar)144 304.8 Q
+(gument to the)-.18 E F1(history)2.5 E F0 -.2(bu)2.5 G(iltin command).2
+E<83>108 321.6 Q .45
+(specifying a \214lename containing a slash as an ar)144 321.6 R .449
+(gument to the)-.18 F F1<ad70>2.949 E F0 .449(option to the)2.949 F F1
+(hash)2.949 E F0 -.2(bu)2.949 G .449(iltin com-).2 F(mand)144 333.6 Q
+<83>108 350.4 Q(importing function de\214nitions from the shell en)144
+350.4 Q(vironment at startup)-.4 E<83>108 367.2 Q(parsing the v)144
+367.2 Q(alue of)-.25 E F2(SHELLOPTS)2.5 E F0(from the shell en)2.25 E
+(vironment at startup)-.4 E<83>108 384 Q(redirecting output using the >\
+, >|, <>, >&, &>, and >> redirection operators)144 384 Q<83>108 400.8 Q
+(using the)144 400.8 Q F1(exec)2.5 E F0 -.2(bu)2.5 G
+(iltin command to replace the shell with another command).2 E<83>108
+417.6 Q(adding or deleting b)144 417.6 Q(uiltin commands with the)-.2 E
+F1<ad66>2.5 E F0(and)2.5 E F1<ad64>2.5 E F0(options to the)2.5 E F1
+(enable)2.5 E F0 -.2(bu)2.5 G(iltin command).2 E<83>108 434.4 Q
+(using the)144 434.4 Q F1(enable)2.5 E F0 -.2(bu)2.5 G
+(iltin command to enable disabled shell b).2 E(uiltins)-.2 E<83>108
+451.2 Q(specifying the)144 451.2 Q F1<ad70>2.5 E F0(option to the)2.5 E
+F1(command)2.5 E F0 -.2(bu)2.5 G(iltin command).2 E<83>108 468 Q
+(turning of)144 468 Q 2.5(fr)-.25 G(estricted mode with)-2.5 E F1
+(set +r)2.5 E F0(or)2.5 E F1(set +o r)2.5 E(estricted)-.18 E F0(.)A
+(These restrictions are enforced after an)108 484.8 Q 2.5(ys)-.15 G
+(tartup \214les are read.)-2.5 E 1.566
+(When a command that is found to be a shell script is e)108 501.6 R -.15
+(xe)-.15 G 1.567(cuted \(see).15 F F2 1.567(COMMAND EXECUTION)4.067 F F0
+(abo)3.817 E -.15(ve)-.15 G(\),).15 E F1(rbash)108 513.6 Q F0(turns of)
+2.5 E 2.5(fa)-.25 G .3 -.15(ny r)-2.5 H(estrictions in the shell spa).15
+E(wned to e)-.15 E -.15(xe)-.15 G(cute the script.).15 E F3(SEE ALSO)72
+530.4 Q/F5 10/Times-Italic@0 SF(Bash Refer)108 542.4 Q(ence Manual)-.37
+E F0 2.5(,B)C(rian F)-2.5 E(ox and Chet Rame)-.15 E(y)-.15 E F5
+(The Gnu Readline Libr)108 554.4 Q(ary)-.15 E F0 2.5(,B)C(rian F)-2.5 E
+(ox and Chet Rame)-.15 E(y)-.15 E F5(The Gnu History Libr)108 566.4 Q
+(ary)-.15 E F0 2.5(,B)C(rian F)-2.5 E(ox and Chet Rame)-.15 E(y)-.15 E
+F5 -.8(Po)108 578.4 S(rtable Oper).8 E
+(ating System Interface \(POSIX\) P)-.15 E(art 2: Shell and Utilities)
+-.8 E F0 2.5(,I)C(EEE --)-2.5 E(http://pubs.opengroup.or)144 590.4 Q
+(g/onlinepubs/9699919799/)-.18 E(http://tiswww)108 602.4 Q
+(.case.edu/~chet/bash/POSIX -- a description of posix mode)-.65 E F5(sh)
+108 614.4 Q F0(\(1\),)A F5(ksh)2.5 E F0(\(1\),)A F5(csh)2.5 E F0(\(1\))A
+F5(emacs)108 626.4 Q F0(\(1\),)A F5(vi)2.5 E F0(\(1\))A F5 -.37(re)108
+638.4 S(adline).37 E F0(\(3\))A F3(FILES)72 655.2 Q F5(/bin/bash)109.666
+667.2 Q F0(The)144 679.2 Q F1(bash)2.5 E F0 -.15(exe)2.5 G(cutable).15 E
+F5(/etc/pr)109.666 691.2 Q(o\214le)-.45 E F0
+(The systemwide initialization \214le, e)144 703.2 Q -.15(xe)-.15 G
+(cuted for login shells).15 E(GNU Bash 5.1)72 768 Q(2020 October 29)
+141.235 E(82)190.395 E 0 Cg EP
+%%Page: 83 83
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S 137.14(SH\(1\) General).35 F
+(Commands Manual)2.5 E -.35(BA)139.64 G(SH\(1\)).35 E/F1 10
+/Times-Italic@0 SF(~/.bash_pr)109.666 84 Q(o\214le)-.45 E F0
+(The personal initialization \214le, e)144 96 Q -.15(xe)-.15 G
+(cuted for login shells).15 E F1(~/.bashr)109.666 108 Q(c)-.37 E F0
+(The indi)144 120 Q(vidual per)-.25 E(-interacti)-.2 E -.15(ve)-.25 G
+(-shell startup \214le).15 E F1(~/.bash_lo)109.666 132 Q(gout)-.1 E F0
+(The indi)144 144 Q(vidual login shell cleanup \214le, e)-.25 E -.15(xe)
+-.15 G(cuted when a login shell e).15 E(xits)-.15 E F1(~/.inputr)109.666
+156 Q(c)-.37 E F0(Indi)144 168 Q(vidual)-.25 E F1 -.37(re)2.5 G(adline)
+.37 E F0(initialization \214le)2.5 E/F2 10.95/Times-Bold@0 SF -.548(AU)
+72 184.8 S(THORS).548 E F0(Brian F)108 196.8 Q(ox, Free Softw)-.15 E
+(are F)-.1 E(oundation)-.15 E(bfox@gnu.or)108 208.8 Q(g)-.18 E
+(Chet Rame)108 225.6 Q 1.3 -.65(y, C)-.15 H(ase W).65 E(estern Reserv)
+-.8 E 2.5(eU)-.15 G(ni)-2.5 E -.15(ve)-.25 G(rsity).15 E(chet.rame)108
+237.6 Q(y@case.edu)-.15 E F2 -.11(BU)72 254.4 S 2.738(GR).11 G(EPOR)
+-2.738 E(TS)-.438 E F0 .568(If you \214nd a b)108 266.4 R .568(ug in)-.2
+F/F3 10/Times-Bold@0 SF(bash,)3.068 E F0 .568(you should report it.)
+3.068 F .568(But \214rst, you should mak)5.568 F 3.068(es)-.1 G .568
+(ure that it really is a b)-3.068 F .567(ug, and)-.2 F 5.625
+(that it appears in the latest v)108 278.4 R 5.625(ersion of)-.15 F F3
+(bash)8.125 E F0 10.625(.T)C 5.625(he latest v)-10.625 F 5.626
+(ersion is al)-.15 F -.1(wa)-.1 G 5.626(ys a).1 F -.25(va)-.2 G 5.626
+(ilable from).25 F F1(ftp://ftp.gnu.or)108 290.4 Q(g/pub/gnu/bash/)-.37
+E F0(.)A .411(Once you ha)108 307.2 R .711 -.15(ve d)-.2 H .411
+(etermined that a b).15 F .411(ug actually e)-.2 F .411(xists, use the)
+-.15 F F1(bashb)3.18 E(ug)-.2 E F0 .41(command to submit a b)3.13 F .41
+(ug report.)-.2 F(If)5.41 E .594(you ha)108 319.2 R .894 -.15(ve a \214)
+-.2 H .595(x, you are encouraged to mail that as well!).15 F .595
+(Suggestions and `philosophical' b)5.595 F .595(ug reports may)-.2 F
+(be mailed to)108 331.2 Q F1 -.2(bu)2.5 G(g-bash@gnu.or).2 E(g)-.37 E F0
+(or posted to the Usenet ne)2.5 E(wsgroup)-.25 E F3(gnu.bash.b)2.5 E(ug)
+-.2 E F0(.)A(ALL b)108 348 Q(ug reports should include:)-.2 E(The v)108
+364.8 Q(ersion number of)-.15 E F3(bash)2.5 E F0(The hardw)108 376.8 Q
+(are and operating system)-.1 E(The compiler used to compile)108 388.8 Q
+2.5(Ad)108 400.8 S(escription of the b)-2.5 E(ug beha)-.2 E(viour)-.2 E
+2.5(As)108 412.8 S(hort script or `recipe' which e)-2.5 E -.15(xe)-.15 G
+(rcises the b).15 E(ug)-.2 E F1(bashb)108.27 429.6 Q(ug)-.2 E F0
+(inserts the \214rst three items automatically into the template it pro)
+2.72 E(vides for \214ling a b)-.15 E(ug report.)-.2 E(Comments and b)108
+446.4 Q(ug reports concerning this manual page should be directed to)-.2
+E F1 -.15(ch)2.5 G(et.r).15 E(ame)-.15 E(y@case)-.3 E(.edu)-.15 E F0(.)
+.25 E F2 -.11(BU)72 463.2 S(GS).11 E F0(It')108 475.2 Q 2.5(st)-.55 G
+(oo big and too slo)-2.5 E -.65(w.)-.25 G 1.869
+(There are some subtle dif)108 492 R 1.869(ferences between)-.25 F F3
+(bash)4.369 E F0 1.869(and traditional v)4.369 F 1.869(ersions of)-.15 F
+F3(sh)4.368 E F0 4.368(,m)C 1.868(ostly because of the)-4.368 F/F4 9
+/Times-Bold@0 SF(POSIX)108 504 Q F0(speci\214cation.)2.25 E
+(Aliases are confusing in some uses.)108 520.8 Q(Shell b)108 537.6 Q
+(uiltin commands and functions are not stoppable/restartable.)-.2 E
+1.315(Compound commands and command sequences of the form `a ; b ; c' a\
+re not handled gracefully when)108 554.4 R .39
+(process suspension is attempted.)108 566.4 R .389
+(When a process is stopped, the shell immediately e)5.39 F -.15(xe)-.15
+G .389(cutes the ne).15 F .389(xt com-)-.15 F .192
+(mand in the sequence.)108 578.4 R .192(It suf)5.192 F .192(\214ces to \
+place the sequence of commands between parentheses to force it into a)
+-.25 F(subshell, which may be stopped as a unit.)108 590.4 Q(Array v)108
+607.2 Q(ariables may not \(yet\) be e)-.25 E(xported.)-.15 E
+(There may be only one acti)108 624 Q .3 -.15(ve c)-.25 H
+(oprocess at a time.).15 E(GNU Bash 5.1)72 768 Q(2020 October 29)141.235
+E(83)190.395 E 0 Cg EP
+%%Trailer
+end
+%%EOF
diff --git a/doc/bashbug.0 b/doc/bashbug.0
new file mode 100644
index 0000000..373c47b
--- /dev/null
+++ b/doc/bashbug.0
@@ -0,0 +1,52 @@
+BASHBUG(1)                  General Commands Manual                 BASHBUG(1)
+
+
+
+NNAAMMEE
+       bashbug - report a bug in bash
+
+SSYYNNOOPPSSIISS
+       bbaasshhbbuugg [_-_-_v_e_r_s_i_o_n] [_-_-_h_e_l_p] [_e_m_a_i_l_-_a_d_d_r_e_s_s]
+
+DDEESSCCRRIIPPTTIIOONN
+       bbaasshhbbuugg is a shell script to help the user compose and mail bug reports
+       concerning bash in a standard format.  bbaasshhbbuugg invokes the editor spec-
+       ified by the environment variable EEDDIITTOORR on a temporary copy of the bug
+       report format outline. The user must fill in the appropriate fields and
+       exit  the  editor.   bbaasshhbbuugg  then  mails  the completed report to _b_u_g_-
+       _b_a_s_h_@_g_n_u_._o_r_g, or _e_m_a_i_l_-_a_d_d_r_e_s_s.  If the report cannot be mailed, it  is
+       saved in the file _d_e_a_d_._b_a_s_h_b_u_g in the invoking user's home directory.
+
+       The  bug report format outline consists of several sections.  The first
+       section provides information about the machine, operating  system,  the
+       bash  version,  and  the  compilation  environment.  The second section
+       should be filled in with a description of the bug.  The  third  section
+       should  be  a  description  of  how to reproduce the bug.  The optional
+       fourth section is for a proposed fix.  Fixes are encouraged.
+
+EENNVVIIRROONNMMEENNTT
+       bbaasshhbbuugg will utilize the following environment variables if they exist:
+
+       EEDDIITTOORR Specifies the preferred editor. If EEDDIITTOORR is  not  set,  bbaasshhbbuugg
+              attempts  to  locate  a number of alternative editors, including
+              eemmaaccss.  If bbaasshhbbuugg cannot locate any of the alternative editors,
+              it attempts to execute vvii.
+
+       HHOOMMEE   Directory  in  which  the failed bug report is saved if the mail
+              fails.
+
+       TTMMPPDDIIRR Directory in which to create temporary files and directories.
+
+SSEEEE AALLSSOO
+       _b_a_s_h(1)
+
+AAUUTTHHOORRSS
+       Brian Fox, Free Software Foundation
+       bfox@gnu.org
+
+       Chet Ramey, Case Western Reserve University
+       chet@po.cwru.edu
+
+
+
+GNU Bash 5.1                     2020 August 1                      BASHBUG(1)
diff --git a/doc/bashbug.1 b/doc/bashbug.1
new file mode 100644
index 0000000..abcaf48
--- /dev/null
+++ b/doc/bashbug.1
@@ -0,0 +1,67 @@
+.\"
+.\" MAN PAGE COMMENTS to
+.\"
+.\"     Chet Ramey
+.\"     Case Western Reserve University
+.\"     chet@po.cwru.edu
+.\"
+.\"     Last Change: Sun Aug  2 15:39:07 EDT 2020
+.\"
+.TH BASHBUG 1 "2020 August 1" "GNU Bash 5.1"
+.SH NAME
+bashbug \- report a bug in bash
+.SH SYNOPSIS
+\fBbashbug\fP [\fI--version\fP] [\fI--help\fP] [\fIemail-address\fP]
+.SH DESCRIPTION
+.B bashbug
+is a shell script to help the user compose and mail bug reports
+concerning bash in a standard format.
+.B bashbug
+invokes the editor specified by the environment variable
+.SM
+.B EDITOR
+on a temporary copy of the bug report format outline. The user must
+fill in the appropriate fields and exit the editor.
+.B bashbug
+then mails the completed report to \fIbug-bash@gnu.org\fP, or
+\fIemail-address\fP.  If the report cannot be mailed, it is saved in the
+file \fIdead.bashbug\fP in the invoking user's home directory.
+.PP
+The bug report format outline consists of several sections.  The first
+section provides information about the machine, operating system, the
+bash version, and the compilation environment.  The second section
+should be filled in with a description of the bug.  The third section
+should be a description of how to reproduce the bug.  The optional
+fourth section is for a proposed fix.  Fixes are encouraged.
+.SH ENVIRONMENT
+.B bashbug
+will utilize the following environment variables if they exist:
+.TP
+.B EDITOR
+Specifies the preferred editor. If
+.SM
+.B EDITOR
+is not set,
+.B bashbug
+attempts to locate a number of alternative editors, including
+.BR emacs .
+If
+.B bashbug
+cannot locate any of the alternative editors, it attempts to execute \fBvi\fP.
+.TP
+.B HOME
+Directory in which the failed bug report is saved if the mail fails.
+.TP
+.B TMPDIR
+Directory in which to create temporary files and directories.
+.SH "SEE ALSO"
+.TP
+\fIbash\fP(1)
+.SH AUTHORS
+Brian Fox, Free Software Foundation
+.br
+bfox@gnu.org
+.PP
+Chet Ramey, Case Western Reserve University
+.br
+chet@po.cwru.edu
diff --git a/doc/bashbug.ps b/doc/bashbug.ps
new file mode 100644
index 0000000..9c60a33
--- /dev/null
+++ b/doc/bashbug.ps
@@ -0,0 +1,297 @@
+%!PS-Adobe-3.0
+%%Creator: groff version 1.22.4
+%%CreationDate: Fri Aug  7 11:58:10 2020
+%%DocumentNeededResources: font Times-Roman
+%%+ font Times-Bold
+%%+ font Times-Italic
+%%DocumentSuppliedResources: procset grops 1.22 4
+%%Pages: 1
+%%PageOrder: Ascend
+%%DocumentMedia: Default 612 792 0 () ()
+%%Orientation: Portrait
+%%EndComments
+%%BeginDefaults
+%%PageMedia: Default
+%%EndDefaults
+%%BeginProlog
+%%BeginResource: procset grops 1.22 4
+%!PS-Adobe-3.0 Resource-ProcSet
+/setpacking where{
+pop
+currentpacking
+true setpacking
+}if
+/grops 120 dict dup begin
+/SC 32 def
+/A/show load def
+/B{0 SC 3 -1 roll widthshow}bind def
+/C{0 exch ashow}bind def
+/D{0 exch 0 SC 5 2 roll awidthshow}bind def
+/E{0 rmoveto show}bind def
+/F{0 rmoveto 0 SC 3 -1 roll widthshow}bind def
+/G{0 rmoveto 0 exch ashow}bind def
+/H{0 rmoveto 0 exch 0 SC 5 2 roll awidthshow}bind def
+/I{0 exch rmoveto show}bind def
+/J{0 exch rmoveto 0 SC 3 -1 roll widthshow}bind def
+/K{0 exch rmoveto 0 exch ashow}bind def
+/L{0 exch rmoveto 0 exch 0 SC 5 2 roll awidthshow}bind def
+/M{rmoveto show}bind def
+/N{rmoveto 0 SC 3 -1 roll widthshow}bind def
+/O{rmoveto 0 exch ashow}bind def
+/P{rmoveto 0 exch 0 SC 5 2 roll awidthshow}bind def
+/Q{moveto show}bind def
+/R{moveto 0 SC 3 -1 roll widthshow}bind def
+/S{moveto 0 exch ashow}bind def
+/T{moveto 0 exch 0 SC 5 2 roll awidthshow}bind def
+/SF{
+findfont exch
+[exch dup 0 exch 0 exch neg 0 0]makefont
+dup setfont
+[exch/setfont cvx]cvx bind def
+}bind def
+/MF{
+findfont
+[5 2 roll
+0 3 1 roll
+neg 0 0]makefont
+dup setfont
+[exch/setfont cvx]cvx bind def
+}bind def
+/level0 0 def
+/RES 0 def
+/PL 0 def
+/LS 0 def
+/MANUAL{
+statusdict begin/manualfeed true store end
+}bind def
+/PLG{
+gsave newpath clippath pathbbox grestore
+exch pop add exch pop
+}bind def
+/BP{
+/level0 save def
+1 setlinecap
+1 setlinejoin
+DEFS/BPhook known{DEFS begin BPhook end}if
+72 RES div dup scale
+LS{
+90 rotate
+}{
+0 PL translate
+}ifelse
+1 -1 scale
+}bind def
+/EP{
+level0 restore
+showpage
+}def
+/DA{
+newpath arcn stroke
+}bind def
+/SN{
+transform
+.25 sub exch .25 sub exch
+round .25 add exch round .25 add exch
+itransform
+}bind def
+/DL{
+SN
+moveto
+SN
+lineto stroke
+}bind def
+/DC{
+newpath 0 360 arc closepath
+}bind def
+/TM matrix def
+/DE{
+TM currentmatrix pop
+translate scale newpath 0 0 .5 0 360 arc closepath
+TM setmatrix
+}bind def
+/RC/rcurveto load def
+/RL/rlineto load def
+/ST/stroke load def
+/MT/moveto load def
+/CL/closepath load def
+/Fr{
+setrgbcolor fill
+}bind def
+/setcmykcolor where{
+pop
+/Fk{
+setcmykcolor fill
+}bind def
+}if
+/Fg{
+setgray fill
+}bind def
+/FL/fill load def
+/LW/setlinewidth load def
+/Cr/setrgbcolor load def
+/setcmykcolor where{
+pop
+/Ck/setcmykcolor load def
+}if
+/Cg/setgray load def
+/RE{
+findfont
+dup maxlength 1 index/FontName known not{1 add}if dict begin
+{
+1 index/FID ne
+2 index/UniqueID ne
+and
+{def}{pop pop}ifelse
+}forall
+/Encoding exch def
+dup/FontName exch def
+currentdict end definefont pop
+}bind def
+/DEFS 0 def
+/EBEGIN{
+moveto
+DEFS begin
+}bind def
+/EEND/end load def
+/CNT 0 def
+/level1 0 def
+/PBEGIN{
+/level1 save def
+translate
+div 3 1 roll div exch scale
+neg exch neg exch translate
+0 setgray
+0 setlinecap
+1 setlinewidth
+0 setlinejoin
+10 setmiterlimit
+[]0 setdash
+/setstrokeadjust where{
+pop
+false setstrokeadjust
+}if
+/setoverprint where{
+pop
+false setoverprint
+}if
+newpath
+/CNT countdictstack def
+userdict begin
+/showpage{}def
+/setpagedevice{}def
+mark
+}bind def
+/PEND{
+cleartomark
+countdictstack CNT sub{end}repeat
+level1 restore
+}bind def
+end def
+/setpacking where{
+pop
+setpacking
+}if
+%%EndResource
+%%EndProlog
+%%BeginSetup
+%%BeginFeature: *PageSize Default
+<< /PageSize [ 612 792 ] /ImagingBBox null >> setpagedevice
+%%EndFeature
+%%IncludeResource: font Times-Roman
+%%IncludeResource: font Times-Bold
+%%IncludeResource: font Times-Italic
+grops begin/DEFS 1 dict def DEFS begin/u{.001 mul}bind def end/RES 72
+def/PL 792 def/LS false def/ENC0[/asciicircum/asciitilde/Scaron/Zcaron
+/scaron/zcaron/Ydieresis/trademark/quotesingle/Euro/.notdef/.notdef
+/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef
+/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef
+/.notdef/.notdef/space/exclam/quotedbl/numbersign/dollar/percent
+/ampersand/quoteright/parenleft/parenright/asterisk/plus/comma/hyphen
+/period/slash/zero/one/two/three/four/five/six/seven/eight/nine/colon
+/semicolon/less/equal/greater/question/at/A/B/C/D/E/F/G/H/I/J/K/L/M/N/O
+/P/Q/R/S/T/U/V/W/X/Y/Z/bracketleft/backslash/bracketright/circumflex
+/underscore/quoteleft/a/b/c/d/e/f/g/h/i/j/k/l/m/n/o/p/q/r/s/t/u/v/w/x/y
+/z/braceleft/bar/braceright/tilde/.notdef/quotesinglbase/guillemotleft
+/guillemotright/bullet/florin/fraction/perthousand/dagger/daggerdbl
+/endash/emdash/ff/fi/fl/ffi/ffl/dotlessi/dotlessj/grave/hungarumlaut
+/dotaccent/breve/caron/ring/ogonek/quotedblleft/quotedblright/oe/lslash
+/quotedblbase/OE/Lslash/.notdef/exclamdown/cent/sterling/currency/yen
+/brokenbar/section/dieresis/copyright/ordfeminine/guilsinglleft
+/logicalnot/minus/registered/macron/degree/plusminus/twosuperior
+/threesuperior/acute/mu/paragraph/periodcentered/cedilla/onesuperior
+/ordmasculine/guilsinglright/onequarter/onehalf/threequarters
+/questiondown/Agrave/Aacute/Acircumflex/Atilde/Adieresis/Aring/AE
+/Ccedilla/Egrave/Eacute/Ecircumflex/Edieresis/Igrave/Iacute/Icircumflex
+/Idieresis/Eth/Ntilde/Ograve/Oacute/Ocircumflex/Otilde/Odieresis
+/multiply/Oslash/Ugrave/Uacute/Ucircumflex/Udieresis/Yacute/Thorn
+/germandbls/agrave/aacute/acircumflex/atilde/adieresis/aring/ae/ccedilla
+/egrave/eacute/ecircumflex/edieresis/igrave/iacute/icircumflex/idieresis
+/eth/ntilde/ograve/oacute/ocircumflex/otilde/odieresis/divide/oslash
+/ugrave/uacute/ucircumflex/udieresis/yacute/thorn/ydieresis]def
+/Times-Italic@0 ENC0/Times-Italic RE/Times-Bold@0 ENC0/Times-Bold RE
+/Times-Roman@0 ENC0/Times-Roman RE
+%%EndSetup
+%%Page: 1 1
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S(SHB).35 E 116.13
+(UG\(1\) General)-.1 F(Commands Manual)2.5 E -.35(BA)118.63 G(SHB).35 E
+(UG\(1\))-.1 E/F1 10.95/Times-Bold@0 SF -.219(NA)72 84 S(ME).219 E F0
+(bashb)108 96 Q(ug \255 report a b)-.2 E(ug in bash)-.2 E F1(SYNOPSIS)72
+112.8 Q/F2 10/Times-Bold@0 SF(bashb)108 124.8 Q(ug)-.2 E F0([)2.5 E/F3
+10/Times-Italic@0 SF(--ver)A(sion)-.1 E F0 2.5(][)C F3(--help)-2.5 E F0
+2.5(][)C F3(email-addr)-2.5 E(ess)-.37 E F0(])A F1(DESCRIPTION)72 141.6
+Q F2(bashb)108 153.6 Q(ug)-.2 E F0 .446
+(is a shell script to help the user compose and mail b)2.947 F .446
+(ug reports concerning bash in a standard for)-.2 F(-)-.2 E(mat.)108
+165.6 Q F2(bashb)5.961 E(ug)-.2 E F0(in)3.461 E -.2(vo)-.4 G -.1(ke).2 G
+3.461(st).1 G .962(he editor speci\214ed by the en)-3.461 F .962
+(vironment v)-.4 F(ariable)-.25 E/F4 9/Times-Bold@0 SF(EDIT)3.462 E(OR)
+-.162 E F0 .962(on a temporary cop)3.212 F 3.462(yo)-.1 G(f)-3.462 E
+.374(the b)108 177.6 R .374(ug report format outline. The user must \
+\214ll in the appropriate \214elds and e)-.2 F .374(xit the editor)-.15
+F(.)-.55 E F2(bashb)5.373 E(ug)-.2 E F0(then)2.873 E 1.141
+(mails the completed report to)108 189.6 R F3 -.2(bu)3.641 G
+(g-bash@gnu.or).2 E(g)-.37 E F0 3.641(,o)C(r)-3.641 E F3(email-addr)
+3.641 E(ess)-.37 E F0 6.141(.I)C 3.641(ft)-6.141 G 1.142
+(he report cannot be mailed, it is)-3.641 F(sa)108 201.6 Q -.15(ve)-.2 G
+2.5(di).15 G 2.5(nt)-2.5 G(he \214le)-2.5 E F3(dead.bashb)2.5 E(ug)-.2 E
+F0(in the in)2.5 E -.2(vo)-.4 G(king user').2 E 2.5(sh)-.55 G
+(ome directory)-2.5 E(.)-.65 E .354(The b)108 218.4 R .354
+(ug report format outline consists of se)-.2 F -.15(ve)-.25 G .353
+(ral sections.).15 F .353(The \214rst section pro)5.353 F .353
+(vides information about the)-.15 F .37
+(machine, operating system, the bash v)108 230.4 R .371
+(ersion, and the compilation en)-.15 F 2.871(vironment. The)-.4 F .371
+(second section should)2.871 F .209
+(be \214lled in with a description of the b)108 242.4 R 2.709(ug. The)
+-.2 F .208(third section should be a description of ho)2.709 F 2.708(wt)
+-.25 G 2.708(or)-2.708 G .208(eproduce the)-2.708 F -.2(bu)108 254.4 S
+2.5(g. The).2 F(optional fourth section is for a proposed \214x.)2.5 E
+(Fix)5 E(es are encouraged.)-.15 E F1(ENVIR)72 271.2 Q(ONMENT)-.329 E F2
+(bashb)108 283.2 Q(ug)-.2 E F0(will utilize the follo)2.5 E(wing en)-.25
+E(vironment v)-.4 E(ariables if the)-.25 E 2.5(ye)-.15 G(xist:)-2.65 E
+F2(EDIT)108 300 Q(OR)-.18 E F0 .327(Speci\214es the preferred editor)144
+312 R 2.827(.I)-.55 G(f)-2.827 E F4(EDIT)2.827 E(OR)-.162 E F0 .327
+(is not set,)2.577 F F2(bashb)2.827 E(ug)-.2 E F0 .328
+(attempts to locate a number of alter)2.827 F(-)-.2 E(nati)144 324 Q
+1.925 -.15(ve e)-.25 H 1.625(ditors, including).15 F F2(emacs)4.125 E F0
+6.625(.I)C(f)-6.625 E F2(bashb)4.125 E(ug)-.2 E F0 1.625
+(cannot locate an)4.125 F 4.125(yo)-.15 G 4.125(ft)-4.125 G 1.625
+(he alternati)-4.125 F 1.925 -.15(ve e)-.25 H 1.625(ditors, it at-).15 F
+(tempts to e)144 336 Q -.15(xe)-.15 G(cute).15 E F2(vi)2.5 E F0(.)A F2
+(HOME)108 352.8 Q F0(Directory in which the f)144 364.8 Q(ailed b)-.1 E
+(ug report is sa)-.2 E -.15(ve)-.2 G 2.5(di).15 G 2.5(ft)-2.5 G
+(he mail f)-2.5 E(ails.)-.1 E F2(TMPDIR)108 381.6 Q F0
+(Directory in which to create temporary \214les and directories.)144
+393.6 Q F1(SEE ALSO)72 410.4 Q F3(bash)108 422.4 Q F0(\(1\))A F1 -.548
+(AU)72 439.2 S(THORS).548 E F0(Brian F)108 451.2 Q(ox, Free Softw)-.15 E
+(are F)-.1 E(oundation)-.15 E(bfox@gnu.or)108 463.2 Q(g)-.18 E
+(Chet Rame)108 480 Q 1.3 -.65(y, C)-.15 H(ase W).65 E(estern Reserv)-.8
+E 2.5(eU)-.15 G(ni)-2.5 E -.15(ve)-.25 G(rsity).15 E(chet@po.cwru.edu)
+108 492 Q(GNU Bash 5.1)72 768 Q(2020 August 1)145.395 E(1)199.555 E 0 Cg
+EP
+%%Trailer
+end
+%%EOF
diff --git a/doc/bashref.dvi b/doc/bashref.dvi
new file mode 100644
index 0000000..2b682d2
--- /dev/null
+++ b/doc/bashref.dvi
diff --git a/doc/bashref.html b/doc/bashref.html
new file mode 100644
index 0000000..6a4c3ab
--- /dev/null
+++ b/doc/bashref.html
@@ -0,0 +1,15872 @@
+<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
+<html>
+<!-- This text is a brief description of the features that are present in
+the Bash shell (version 5.1, 29 October 2020).
+
+This is Edition 5.1, last updated 29 October 2020,
+of The GNU Bash Reference Manual,
+for Bash, Version 5.1.
+
+Copyright (C) 1988-2020 Free Software Foundation, Inc.
+
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.3 or
+any later version published by the Free Software Foundation; with no
+Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.
+A copy of the license is included in the section entitled
+"GNU Free Documentation License". -->
+<!-- Created by GNU Texinfo 6.7, http://www.gnu.org/software/texinfo/ -->
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
+<title>Bash Reference Manual</title>
+
+<meta name="description" content="Bash Reference Manual">
+<meta name="keywords" content="Bash Reference Manual">
+<meta name="resource-type" content="document">
+<meta name="distribution" content="global">
+<meta name="Generator" content="makeinfo">
+<link href="#Top" rel="start" title="Top">
+<link href="#Indexes" rel="index" title="Indexes">
+<link href="#SEC_Contents" rel="contents" title="Table of Contents">
+<link href="dir.html#Top" rel="up" title="(dir)">
+<style type="text/css">
+<!--
+a.summary-letter {text-decoration: none}
+blockquote.indentedblock {margin-right: 0em}
+div.display {margin-left: 3.2em}
+div.example {margin-left: 3.2em}
+div.lisp {margin-left: 3.2em}
+kbd {font-style: oblique}
+pre.display {font-family: inherit}
+pre.format {font-family: inherit}
+pre.menu-comment {font-family: serif}
+pre.menu-preformatted {font-family: serif}
+span.nolinebreak {white-space: nowrap}
+span.roman {font-family: initial; font-weight: normal}
+span.sansserif {font-family: sans-serif; font-weight: normal}
+ul.no-bullet {list-style: none}
+-->
+</style>
+
+
+</head>
+
+<body lang="en">
+<h1 class="settitle" align="center">Bash Reference Manual</h1>
+
+
+
+
+
+
+
+
+
+
+<span id="SEC_Contents"></span>
+<h2 class="contents-heading">Table of Contents</h2>
+
+<div class="contents">
+
+<ul class="no-bullet">
+  <li><a id="toc-Introduction-1" href="#Introduction">1 Introduction</a>
+  <ul class="no-bullet">
+    <li><a id="toc-What-is-Bash_003f-1" href="#What-is-Bash_003f">1.1 What is Bash?</a></li>
+    <li><a id="toc-What-is-a-shell_003f-1" href="#What-is-a-shell_003f">1.2 What is a shell?</a></li>
+  </ul></li>
+  <li><a id="toc-Definitions-1" href="#Definitions">2 Definitions</a></li>
+  <li><a id="toc-Basic-Shell-Features-1" href="#Basic-Shell-Features">3 Basic Shell Features</a>
+  <ul class="no-bullet">
+    <li><a id="toc-Shell-Syntax-1" href="#Shell-Syntax">3.1 Shell Syntax</a>
+    <ul class="no-bullet">
+      <li><a id="toc-Shell-Operation-1" href="#Shell-Operation">3.1.1 Shell Operation</a></li>
+      <li><a id="toc-Quoting-1" href="#Quoting">3.1.2 Quoting</a>
+      <ul class="no-bullet">
+        <li><a id="toc-Escape-Character-1" href="#Escape-Character">3.1.2.1 Escape Character</a></li>
+        <li><a id="toc-Single-Quotes-1" href="#Single-Quotes">3.1.2.2 Single Quotes</a></li>
+        <li><a id="toc-Double-Quotes-1" href="#Double-Quotes">3.1.2.3 Double Quotes</a></li>
+        <li><a id="toc-ANSI_002dC-Quoting-1" href="#ANSI_002dC-Quoting">3.1.2.4 ANSI-C Quoting</a></li>
+        <li><a id="toc-Locale_002dSpecific-Translation" href="#Locale-Translation">3.1.2.5 Locale-Specific Translation</a></li>
+      </ul></li>
+      <li><a id="toc-Comments-1" href="#Comments">3.1.3 Comments</a></li>
+    </ul></li>
+    <li><a id="toc-Shell-Commands-1" href="#Shell-Commands">3.2 Shell Commands</a>
+    <ul class="no-bullet">
+      <li><a id="toc-Reserved-Words-1" href="#Reserved-Words">3.2.1 Reserved Words</a></li>
+      <li><a id="toc-Simple-Commands-1" href="#Simple-Commands">3.2.2 Simple Commands</a></li>
+      <li><a id="toc-Pipelines-1" href="#Pipelines">3.2.3 Pipelines</a></li>
+      <li><a id="toc-Lists-of-Commands" href="#Lists">3.2.4 Lists of Commands</a></li>
+      <li><a id="toc-Compound-Commands-1" href="#Compound-Commands">3.2.5 Compound Commands</a>
+      <ul class="no-bullet">
+        <li><a id="toc-Looping-Constructs-1" href="#Looping-Constructs">3.2.5.1 Looping Constructs</a></li>
+        <li><a id="toc-Conditional-Constructs-1" href="#Conditional-Constructs">3.2.5.2 Conditional Constructs</a></li>
+        <li><a id="toc-Grouping-Commands" href="#Command-Grouping">3.2.5.3 Grouping Commands</a></li>
+      </ul></li>
+      <li><a id="toc-Coprocesses-1" href="#Coprocesses">3.2.6 Coprocesses</a></li>
+      <li><a id="toc-GNU-Parallel-1" href="#GNU-Parallel">3.2.7 GNU Parallel</a></li>
+    </ul></li>
+    <li><a id="toc-Shell-Functions-1" href="#Shell-Functions">3.3 Shell Functions</a></li>
+    <li><a id="toc-Shell-Parameters-1" href="#Shell-Parameters">3.4 Shell Parameters</a>
+    <ul class="no-bullet">
+      <li><a id="toc-Positional-Parameters-1" href="#Positional-Parameters">3.4.1 Positional Parameters</a></li>
+      <li><a id="toc-Special-Parameters-1" href="#Special-Parameters">3.4.2 Special Parameters</a></li>
+    </ul></li>
+    <li><a id="toc-Shell-Expansions-1" href="#Shell-Expansions">3.5 Shell Expansions</a>
+    <ul class="no-bullet">
+      <li><a id="toc-Brace-Expansion-1" href="#Brace-Expansion">3.5.1 Brace Expansion</a></li>
+      <li><a id="toc-Tilde-Expansion-1" href="#Tilde-Expansion">3.5.2 Tilde Expansion</a></li>
+      <li><a id="toc-Shell-Parameter-Expansion-1" href="#Shell-Parameter-Expansion">3.5.3 Shell Parameter Expansion</a></li>
+      <li><a id="toc-Command-Substitution-1" href="#Command-Substitution">3.5.4 Command Substitution</a></li>
+      <li><a id="toc-Arithmetic-Expansion-1" href="#Arithmetic-Expansion">3.5.5 Arithmetic Expansion</a></li>
+      <li><a id="toc-Process-Substitution-1" href="#Process-Substitution">3.5.6 Process Substitution</a></li>
+      <li><a id="toc-Word-Splitting-1" href="#Word-Splitting">3.5.7 Word Splitting</a></li>
+      <li><a id="toc-Filename-Expansion-1" href="#Filename-Expansion">3.5.8 Filename Expansion</a>
+      <ul class="no-bullet">
+        <li><a id="toc-Pattern-Matching-1" href="#Pattern-Matching">3.5.8.1 Pattern Matching</a></li>
+      </ul></li>
+      <li><a id="toc-Quote-Removal-1" href="#Quote-Removal">3.5.9 Quote Removal</a></li>
+    </ul></li>
+    <li><a id="toc-Redirections-1" href="#Redirections">3.6 Redirections</a>
+    <ul class="no-bullet">
+      <li><a id="toc-Redirecting-Input" href="#Redirecting-Input">3.6.1 Redirecting Input</a></li>
+      <li><a id="toc-Redirecting-Output" href="#Redirecting-Output">3.6.2 Redirecting Output</a></li>
+      <li><a id="toc-Appending-Redirected-Output" href="#Appending-Redirected-Output">3.6.3 Appending Redirected Output</a></li>
+      <li><a id="toc-Redirecting-Standard-Output-and-Standard-Error" href="#Redirecting-Standard-Output-and-Standard-Error">3.6.4 Redirecting Standard Output and Standard Error</a></li>
+      <li><a id="toc-Appending-Standard-Output-and-Standard-Error" href="#Appending-Standard-Output-and-Standard-Error">3.6.5 Appending Standard Output and Standard Error</a></li>
+      <li><a id="toc-Here-Documents" href="#Here-Documents">3.6.6 Here Documents</a></li>
+      <li><a id="toc-Here-Strings" href="#Here-Strings">3.6.7 Here Strings</a></li>
+      <li><a id="toc-Duplicating-File-Descriptors" href="#Duplicating-File-Descriptors">3.6.8 Duplicating File Descriptors</a></li>
+      <li><a id="toc-Moving-File-Descriptors" href="#Moving-File-Descriptors">3.6.9 Moving File Descriptors</a></li>
+      <li><a id="toc-Opening-File-Descriptors-for-Reading-and-Writing" href="#Opening-File-Descriptors-for-Reading-and-Writing">3.6.10 Opening File Descriptors for Reading and Writing</a></li>
+    </ul></li>
+    <li><a id="toc-Executing-Commands-1" href="#Executing-Commands">3.7 Executing Commands</a>
+    <ul class="no-bullet">
+      <li><a id="toc-Simple-Command-Expansion-1" href="#Simple-Command-Expansion">3.7.1 Simple Command Expansion</a></li>
+      <li><a id="toc-Command-Search-and-Execution-1" href="#Command-Search-and-Execution">3.7.2 Command Search and Execution</a></li>
+      <li><a id="toc-Command-Execution-Environment-1" href="#Command-Execution-Environment">3.7.3 Command Execution Environment</a></li>
+      <li><a id="toc-Environment-1" href="#Environment">3.7.4 Environment</a></li>
+      <li><a id="toc-Exit-Status-1" href="#Exit-Status">3.7.5 Exit Status</a></li>
+      <li><a id="toc-Signals-1" href="#Signals">3.7.6 Signals</a></li>
+    </ul></li>
+    <li><a id="toc-Shell-Scripts-1" href="#Shell-Scripts">3.8 Shell Scripts</a></li>
+  </ul></li>
+  <li><a id="toc-Shell-Builtin-Commands-1" href="#Shell-Builtin-Commands">4 Shell Builtin Commands</a>
+  <ul class="no-bullet">
+    <li><a id="toc-Bourne-Shell-Builtins-1" href="#Bourne-Shell-Builtins">4.1 Bourne Shell Builtins</a></li>
+    <li><a id="toc-Bash-Builtin-Commands" href="#Bash-Builtins">4.2 Bash Builtin Commands</a></li>
+    <li><a id="toc-Modifying-Shell-Behavior-1" href="#Modifying-Shell-Behavior">4.3 Modifying Shell Behavior</a>
+    <ul class="no-bullet">
+      <li><a id="toc-The-Set-Builtin-1" href="#The-Set-Builtin">4.3.1 The Set Builtin</a></li>
+      <li><a id="toc-The-Shopt-Builtin-1" href="#The-Shopt-Builtin">4.3.2 The Shopt Builtin</a></li>
+    </ul></li>
+    <li><a id="toc-Special-Builtins-1" href="#Special-Builtins">4.4 Special Builtins</a></li>
+  </ul></li>
+  <li><a id="toc-Shell-Variables-1" href="#Shell-Variables">5 Shell Variables</a>
+  <ul class="no-bullet">
+    <li><a id="toc-Bourne-Shell-Variables-1" href="#Bourne-Shell-Variables">5.1 Bourne Shell Variables</a></li>
+    <li><a id="toc-Bash-Variables-1" href="#Bash-Variables">5.2 Bash Variables</a></li>
+  </ul></li>
+  <li><a id="toc-Bash-Features-2" href="#Bash-Features">6 Bash Features</a>
+  <ul class="no-bullet">
+    <li><a id="toc-Invoking-Bash-1" href="#Invoking-Bash">6.1 Invoking Bash</a></li>
+    <li><a id="toc-Bash-Startup-Files-1" href="#Bash-Startup-Files">6.2 Bash Startup Files</a></li>
+    <li><a id="toc-Interactive-Shells-1" href="#Interactive-Shells">6.3 Interactive Shells</a>
+    <ul class="no-bullet">
+      <li><a id="toc-What-is-an-Interactive-Shell_003f-1" href="#What-is-an-Interactive-Shell_003f">6.3.1 What is an Interactive Shell?</a></li>
+      <li><a id="toc-Is-this-Shell-Interactive_003f-1" href="#Is-this-Shell-Interactive_003f">6.3.2 Is this Shell Interactive?</a></li>
+      <li><a id="toc-Interactive-Shell-Behavior-1" href="#Interactive-Shell-Behavior">6.3.3 Interactive Shell Behavior</a></li>
+    </ul></li>
+    <li><a id="toc-Bash-Conditional-Expressions-1" href="#Bash-Conditional-Expressions">6.4 Bash Conditional Expressions</a></li>
+    <li><a id="toc-Shell-Arithmetic-1" href="#Shell-Arithmetic">6.5 Shell Arithmetic</a></li>
+    <li><a id="toc-Aliases-1" href="#Aliases">6.6 Aliases</a></li>
+    <li><a id="toc-Arrays-1" href="#Arrays">6.7 Arrays</a></li>
+    <li><a id="toc-The-Directory-Stack-1" href="#The-Directory-Stack">6.8 The Directory Stack</a>
+    <ul class="no-bullet">
+      <li><a id="toc-Directory-Stack-Builtins-1" href="#Directory-Stack-Builtins">6.8.1 Directory Stack Builtins</a></li>
+    </ul></li>
+    <li><a id="toc-Controlling-the-Prompt-1" href="#Controlling-the-Prompt">6.9 Controlling the Prompt</a></li>
+    <li><a id="toc-The-Restricted-Shell-1" href="#The-Restricted-Shell">6.10 The Restricted Shell</a></li>
+    <li><a id="toc-Bash-POSIX-Mode-1" href="#Bash-POSIX-Mode">6.11 Bash POSIX Mode</a></li>
+    <li><a id="toc-Shell-Compatibility-Mode-1" href="#Shell-Compatibility-Mode">6.12 Shell Compatibility Mode</a></li>
+  </ul></li>
+  <li><a id="toc-Job-Control-1" href="#Job-Control">7 Job Control</a>
+  <ul class="no-bullet">
+    <li><a id="toc-Job-Control-Basics-1" href="#Job-Control-Basics">7.1 Job Control Basics</a></li>
+    <li><a id="toc-Job-Control-Builtins-1" href="#Job-Control-Builtins">7.2 Job Control Builtins</a></li>
+    <li><a id="toc-Job-Control-Variables-1" href="#Job-Control-Variables">7.3 Job Control Variables</a></li>
+  </ul></li>
+  <li><a id="toc-Command-Line-Editing-1" href="#Command-Line-Editing">8 Command Line Editing</a>
+  <ul class="no-bullet">
+    <li><a id="toc-Introduction-to-Line-Editing" href="#Introduction-and-Notation">8.1 Introduction to Line Editing</a></li>
+    <li><a id="toc-Readline-Interaction-1" href="#Readline-Interaction">8.2 Readline Interaction</a>
+    <ul class="no-bullet">
+      <li><a id="toc-Readline-Bare-Essentials-1" href="#Readline-Bare-Essentials">8.2.1 Readline Bare Essentials</a></li>
+      <li><a id="toc-Readline-Movement-Commands-1" href="#Readline-Movement-Commands">8.2.2 Readline Movement Commands</a></li>
+      <li><a id="toc-Readline-Killing-Commands-1" href="#Readline-Killing-Commands">8.2.3 Readline Killing Commands</a></li>
+      <li><a id="toc-Readline-Arguments-1" href="#Readline-Arguments">8.2.4 Readline Arguments</a></li>
+      <li><a id="toc-Searching-for-Commands-in-the-History" href="#Searching">8.2.5 Searching for Commands in the History</a></li>
+    </ul></li>
+    <li><a id="toc-Readline-Init-File-1" href="#Readline-Init-File">8.3 Readline Init File</a>
+    <ul class="no-bullet">
+      <li><a id="toc-Readline-Init-File-Syntax-1" href="#Readline-Init-File-Syntax">8.3.1 Readline Init File Syntax</a></li>
+      <li><a id="toc-Conditional-Init-Constructs-1" href="#Conditional-Init-Constructs">8.3.2 Conditional Init Constructs</a></li>
+      <li><a id="toc-Sample-Init-File-1" href="#Sample-Init-File">8.3.3 Sample Init File</a></li>
+    </ul></li>
+    <li><a id="toc-Bindable-Readline-Commands-1" href="#Bindable-Readline-Commands">8.4 Bindable Readline Commands</a>
+    <ul class="no-bullet">
+      <li><a id="toc-Commands-For-Moving-1" href="#Commands-For-Moving">8.4.1 Commands For Moving</a></li>
+      <li><a id="toc-Commands-For-Manipulating-The-History" href="#Commands-For-History">8.4.2 Commands For Manipulating The History</a></li>
+      <li><a id="toc-Commands-For-Changing-Text" href="#Commands-For-Text">8.4.3 Commands For Changing Text</a></li>
+      <li><a id="toc-Killing-And-Yanking" href="#Commands-For-Killing">8.4.4 Killing And Yanking</a></li>
+      <li><a id="toc-Specifying-Numeric-Arguments" href="#Numeric-Arguments">8.4.5 Specifying Numeric Arguments</a></li>
+      <li><a id="toc-Letting-Readline-Type-For-You" href="#Commands-For-Completion">8.4.6 Letting Readline Type For You</a></li>
+      <li><a id="toc-Keyboard-Macros-1" href="#Keyboard-Macros">8.4.7 Keyboard Macros</a></li>
+      <li><a id="toc-Some-Miscellaneous-Commands" href="#Miscellaneous-Commands">8.4.8 Some Miscellaneous Commands</a></li>
+    </ul></li>
+    <li><a id="toc-Readline-vi-Mode-1" href="#Readline-vi-Mode">8.5 Readline vi Mode</a></li>
+    <li><a id="toc-Programmable-Completion-1" href="#Programmable-Completion">8.6 Programmable Completion</a></li>
+    <li><a id="toc-Programmable-Completion-Builtins-1" href="#Programmable-Completion-Builtins">8.7 Programmable Completion Builtins</a></li>
+    <li><a id="toc-A-Programmable-Completion-Example-1" href="#A-Programmable-Completion-Example">8.8 A Programmable Completion Example</a></li>
+  </ul></li>
+  <li><a id="toc-Using-History-Interactively-1" href="#Using-History-Interactively">9 Using History Interactively</a>
+  <ul class="no-bullet">
+    <li><a id="toc-Bash-History-Facilities-1" href="#Bash-History-Facilities">9.1 Bash History Facilities</a></li>
+    <li><a id="toc-Bash-History-Builtins-1" href="#Bash-History-Builtins">9.2 Bash History Builtins</a></li>
+    <li><a id="toc-History-Expansion" href="#History-Interaction">9.3 History Expansion</a>
+    <ul class="no-bullet">
+      <li><a id="toc-Event-Designators-1" href="#Event-Designators">9.3.1 Event Designators</a></li>
+      <li><a id="toc-Word-Designators-1" href="#Word-Designators">9.3.2 Word Designators</a></li>
+      <li><a id="toc-Modifiers-1" href="#Modifiers">9.3.3 Modifiers</a></li>
+    </ul></li>
+  </ul></li>
+  <li><a id="toc-Installing-Bash-1" href="#Installing-Bash">10 Installing Bash</a>
+  <ul class="no-bullet">
+    <li><a id="toc-Basic-Installation-1" href="#Basic-Installation">10.1 Basic Installation</a></li>
+    <li><a id="toc-Compilers-and-Options-1" href="#Compilers-and-Options">10.2 Compilers and Options</a></li>
+    <li><a id="toc-Compiling-For-Multiple-Architectures-1" href="#Compiling-For-Multiple-Architectures">10.3 Compiling For Multiple Architectures</a></li>
+    <li><a id="toc-Installation-Names-1" href="#Installation-Names">10.4 Installation Names</a></li>
+    <li><a id="toc-Specifying-the-System-Type-1" href="#Specifying-the-System-Type">10.5 Specifying the System Type</a></li>
+    <li><a id="toc-Sharing-Defaults-1" href="#Sharing-Defaults">10.6 Sharing Defaults</a></li>
+    <li><a id="toc-Operation-Controls-1" href="#Operation-Controls">10.7 Operation Controls</a></li>
+    <li><a id="toc-Optional-Features-1" href="#Optional-Features">10.8 Optional Features</a></li>
+  </ul></li>
+  <li><a id="toc-Reporting-Bugs-1" href="#Reporting-Bugs">Appendix A Reporting Bugs</a></li>
+  <li><a id="toc-Major-Differences-From-The-Bourne-Shell-1" href="#Major-Differences-From-The-Bourne-Shell">Appendix B Major Differences From The Bourne Shell</a>
+  <ul class="no-bullet">
+    <li><a id="toc-Implementation-Differences-From-The-SVR4_002e2-Shell" href="#Implementation-Differences-From-The-SVR4_002e2-Shell">B.1 Implementation Differences From The SVR4.2 Shell</a></li>
+  </ul></li>
+  <li><a id="toc-GNU-Free-Documentation-License-1" href="#GNU-Free-Documentation-License">Appendix C GNU Free Documentation License</a></li>
+  <li><a id="toc-Indexes-1" href="#Indexes">Appendix D Indexes</a>
+  <ul class="no-bullet">
+    <li><a id="toc-Index-of-Shell-Builtin-Commands" href="#Builtin-Index" rel="index">D.1 Index of Shell Builtin Commands</a></li>
+    <li><a id="toc-Index-of-Shell-Reserved-Words" href="#Reserved-Word-Index" rel="index">D.2 Index of Shell Reserved Words</a></li>
+    <li><a id="toc-Parameter-and-Variable-Index" href="#Variable-Index" rel="index">D.3 Parameter and Variable Index</a></li>
+    <li><a id="toc-Function-Index-1" href="#Function-Index" rel="index">D.4 Function Index</a></li>
+    <li><a id="toc-Concept-Index-1" href="#Concept-Index" rel="index">D.5 Concept Index</a></li>
+  </ul></li>
+</ul>
+</div>
+
+
+<span id="Top"></span><div class="header">
+<p>
+Next: <a href="#Introduction" accesskey="n" rel="next">Introduction</a>, Previous: <a href="dir.html#Top" accesskey="p" rel="prev">(dir)</a>, Up: <a href="dir.html#Top" accesskey="u" rel="up">(dir)</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Bash-Features-1"></span><h1 class="top">Bash Features</h1>
+
+<p>This text is a brief description of the features that are present in
+the Bash shell (version 5.1, 29 October 2020).
+The Bash home page is <a href="http://www.gnu.org/software/bash/">http://www.gnu.org/software/bash/</a>.
+</p>
+<p>This is Edition 5.1, last updated 29 October 2020,
+of <cite>The GNU Bash Reference Manual</cite>,
+for <code>Bash</code>, Version 5.1.
+</p>
+<p>Bash contains features that appear in other popular shells, and some
+features that only appear in Bash.  Some of the shells that Bash has
+borrowed concepts from are the Bourne Shell (<samp>sh</samp>), the Korn Shell
+(<samp>ksh</samp>), and the C-shell (<samp>csh</samp> and its successor,
+<samp>tcsh</samp>).  The following menu breaks the features up into
+categories, noting which features were inspired by other shells and
+which are specific to Bash.
+</p>
+<p>This manual is meant as a brief introduction to features found in
+Bash.  The Bash manual page should be used as the definitive
+reference on shell behavior.
+</p>
+<table class="menu" border="0" cellspacing="0">
+<tr><td align="left" valign="top">&bull; <a href="#Introduction" accesskey="1">Introduction</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">An introduction to the shell.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Definitions" accesskey="2">Definitions</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Some definitions used in the rest of this
+				manual.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Basic-Shell-Features" accesskey="3">Basic Shell Features</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">The shell &quot;building blocks&quot;.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Shell-Builtin-Commands" accesskey="4">Shell Builtin Commands</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Commands that are a part of the shell.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Shell-Variables" accesskey="5">Shell Variables</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Variables used or set by Bash.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Bash-Features" accesskey="6">Bash Features</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Features found only in Bash.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Job-Control" accesskey="7">Job Control</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">What job control is and how Bash allows you
+				to use it.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Command-Line-Editing" accesskey="8">Command Line Editing</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Chapter describing the command line
+				editing features.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Using-History-Interactively" accesskey="9">Using History Interactively</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Command History Expansion
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Installing-Bash">Installing Bash</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How to build and install Bash on your system.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Reporting-Bugs">Reporting Bugs</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How to report bugs in Bash.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Major-Differences-From-The-Bourne-Shell">Major Differences From The Bourne Shell</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">A terse list of the differences
+						between Bash and historical
+						versions of /bin/sh.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#GNU-Free-Documentation-License">GNU Free Documentation License</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Copying and sharing this documentation.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Indexes">Indexes</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Various indexes for this manual.
+</td></tr>
+</table>
+
+<hr>
+<span id="Introduction"></span><div class="header">
+<p>
+Next: <a href="#Definitions" accesskey="n" rel="next">Definitions</a>, Up: <a href="#Top" accesskey="u" rel="up">Top</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Introduction-1"></span><h2 class="chapter">1 Introduction</h2>
+<table class="menu" border="0" cellspacing="0">
+<tr><td align="left" valign="top">&bull; <a href="#What-is-Bash_003f" accesskey="1">What is Bash?</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">A short description of Bash.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#What-is-a-shell_003f" accesskey="2">What is a shell?</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">A brief introduction to shells.
+</td></tr>
+</table>
+
+<hr>
+<span id="What-is-Bash_003f"></span><div class="header">
+<p>
+Next: <a href="#What-is-a-shell_003f" accesskey="n" rel="next">What is a shell?</a>, Up: <a href="#Introduction" accesskey="u" rel="up">Introduction</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="What-is-Bash_003f-1"></span><h3 class="section">1.1 What is Bash?</h3>
+
+<p>Bash is the shell, or command language interpreter,
+for the <small>GNU</small> operating system.
+The name is an acronym for the &lsquo;<samp>Bourne-Again SHell</samp>&rsquo;,
+a pun on Stephen Bourne, the author of the direct ancestor of
+the current Unix shell <code>sh</code>, 
+which appeared in the Seventh Edition Bell Labs Research version
+of Unix.
+</p>
+<p>Bash is largely compatible with <code>sh</code> and incorporates useful
+features from the Korn shell <code>ksh</code> and the C shell <code>csh</code>.
+It is intended to be a conformant implementation of the <small>IEEE</small>
+<small>POSIX</small> Shell and Tools portion of the <small>IEEE</small> <small>POSIX</small>
+specification (<small>IEEE</small> Standard 1003.1).
+It offers functional improvements over <code>sh</code> for both interactive and
+programming use.
+</p>
+<p>While the <small>GNU</small> operating system provides other shells, including
+a version of <code>csh</code>, Bash is the default shell.
+Like other <small>GNU</small> software, Bash is quite portable.  It currently runs
+on nearly every version of Unix and a few other operating systems -
+independently-supported ports exist for <small>MS-DOS</small>, <small>OS/2</small>,
+and Windows platforms.
+</p>
+<hr>
+<span id="What-is-a-shell_003f"></span><div class="header">
+<p>
+Previous: <a href="#What-is-Bash_003f" accesskey="p" rel="prev">What is Bash?</a>, Up: <a href="#Introduction" accesskey="u" rel="up">Introduction</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="What-is-a-shell_003f-1"></span><h3 class="section">1.2 What is a shell?</h3>
+
+<p>At its base, a shell is simply a macro processor that executes
+commands.  The term macro processor means functionality where text
+and symbols are expanded to create larger expressions.
+</p>
+<p>A Unix shell is both a command interpreter and a programming
+language.  As a command interpreter, the shell provides the user
+interface to the rich set of <small>GNU</small> utilities.  The programming
+language features allow these utilities to be combined.
+Files containing commands can be created, and become
+commands themselves.  These new commands have the same status as
+system commands in directories such as <samp>/bin</samp>, allowing users
+or groups to establish custom environments to automate their common
+tasks.
+</p>
+<p>Shells may be used interactively or non-interactively.  In
+interactive mode, they accept input typed from the keyboard.
+When executing non-interactively, shells execute commands read
+from a file.
+</p>
+<p>A shell allows execution of <small>GNU</small> commands, both synchronously and
+asynchronously.
+The shell waits for synchronous commands to complete before accepting
+more input; asynchronous commands continue to execute in parallel
+with the shell while it reads and executes additional commands.
+The <em>redirection</em> constructs permit
+fine-grained control of the input and output of those commands.
+Moreover, the shell allows control over the contents of commands&rsquo;
+environments.
+</p>
+<p>Shells also provide a small set of built-in
+commands (<em>builtins</em>) implementing functionality impossible
+or inconvenient to obtain via separate utilities.
+For example, <code>cd</code>, <code>break</code>, <code>continue</code>, and
+<code>exec</code> cannot be implemented outside of the shell because
+they directly manipulate the shell itself.
+The <code>history</code>, <code>getopts</code>, <code>kill</code>, or <code>pwd</code>
+builtins, among others, could be implemented in separate utilities,
+but they are more convenient to use as builtin commands.
+All of the shell builtins are described in
+subsequent sections.
+</p>
+<p>While executing commands is essential, most of the power (and
+complexity) of shells is due to their embedded programming
+languages.  Like any high-level language, the shell provides
+variables, flow control constructs, quoting, and functions. 
+</p>
+<p>Shells offer features geared specifically for
+interactive use rather than to augment the programming language. 
+These interactive features include job control, command line
+editing, command history and aliases.  Each of these features is
+described in this manual.
+</p>
+<hr>
+<span id="Definitions"></span><div class="header">
+<p>
+Next: <a href="#Basic-Shell-Features" accesskey="n" rel="next">Basic Shell Features</a>, Previous: <a href="#Introduction" accesskey="p" rel="prev">Introduction</a>, Up: <a href="#Top" accesskey="u" rel="up">Top</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Definitions-1"></span><h2 class="chapter">2 Definitions</h2>
+<p>These definitions are used throughout the remainder of this manual.
+</p>
+<dl compact="compact">
+<dt><code>POSIX</code></dt>
+<dd><span id="index-POSIX"></span>
+<p>A family of open system standards based on Unix.  Bash
+is primarily concerned with the Shell and Utilities portion of the
+<small>POSIX</small> 1003.1 standard. 
+</p>
+</dd>
+<dt><code>blank</code></dt>
+<dd><p>A space or tab character.
+</p>
+</dd>
+<dt><code>builtin</code></dt>
+<dd><span id="index-builtin-1"></span>
+<p>A command that is implemented internally by the shell itself, rather
+than by an executable program somewhere in the file system.
+</p>
+</dd>
+<dt><code>control operator</code></dt>
+<dd><span id="index-control-operator"></span>
+<p>A <code>token</code> that performs a control function.  It is a <code>newline</code>
+or one of the following:
+&lsquo;<samp>||</samp>&rsquo;, &lsquo;<samp>&amp;&amp;</samp>&rsquo;, &lsquo;<samp>&amp;</samp>&rsquo;, &lsquo;<samp>;</samp>&rsquo;, &lsquo;<samp>;;</samp>&rsquo;, &lsquo;<samp>;&amp;</samp>&rsquo;, &lsquo;<samp>;;&amp;</samp>&rsquo;,
+&lsquo;<samp>|</samp>&rsquo;, &lsquo;<samp>|&amp;</samp>&rsquo;, &lsquo;<samp>(</samp>&rsquo;, or &lsquo;<samp>)</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>exit status</code></dt>
+<dd><span id="index-exit-status"></span>
+<p>The value returned by a command to its caller.  The value is restricted
+to eight bits, so the maximum value is 255.
+</p>
+</dd>
+<dt><code>field</code></dt>
+<dd><span id="index-field"></span>
+<p>A unit of text that is the result of one of the shell expansions.  After
+expansion, when executing a command, the resulting fields are used as
+the command name and arguments.
+</p>
+</dd>
+<dt><code>filename</code></dt>
+<dd><span id="index-filename"></span>
+<p>A string of characters used to identify a file.
+</p>
+</dd>
+<dt><code>job</code></dt>
+<dd><span id="index-job"></span>
+<p>A set of processes comprising a pipeline, and any processes descended
+from it, that are all in the same process group.
+</p>
+</dd>
+<dt><code>job control</code></dt>
+<dd><span id="index-job-control"></span>
+<p>A mechanism by which users can selectively stop (suspend) and restart
+(resume) execution of processes.
+</p>
+</dd>
+<dt><code>metacharacter</code></dt>
+<dd><span id="index-metacharacter"></span>
+<p>A character that, when unquoted, separates words.  A metacharacter is
+a <code>space</code>, <code>tab</code>, <code>newline</code>, or one of the following characters:
+&lsquo;<samp>|</samp>&rsquo;, &lsquo;<samp>&amp;</samp>&rsquo;, &lsquo;<samp>;</samp>&rsquo;, &lsquo;<samp>(</samp>&rsquo;, &lsquo;<samp>)</samp>&rsquo;, &lsquo;<samp>&lt;</samp>&rsquo;, or
+&lsquo;<samp>&gt;</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>name</code></dt>
+<dd><span id="index-name"></span>
+<span id="index-identifier"></span>
+<p>A <code>word</code> consisting solely of letters, numbers, and underscores,
+and beginning with a letter or underscore.  <code>Name</code>s are used as
+shell variable and function names.
+Also referred to as an <code>identifier</code>.
+</p>
+</dd>
+<dt><code>operator</code></dt>
+<dd><span id="index-operator_002c-shell"></span>
+<p>A <code>control operator</code> or a <code>redirection operator</code>.
+See <a href="#Redirections">Redirections</a>, for a list of redirection operators.
+Operators contain at least one unquoted <code>metacharacter</code>.
+</p>
+</dd>
+<dt><code>process group</code></dt>
+<dd><span id="index-process-group"></span>
+<p>A collection of related processes each having the same process
+group <small>ID</small>.
+</p>
+</dd>
+<dt><code>process group ID</code></dt>
+<dd><span id="index-process-group-ID"></span>
+<p>A unique identifier that represents a <code>process group</code>
+during its lifetime.
+</p>
+</dd>
+<dt><code>reserved word</code></dt>
+<dd><span id="index-reserved-word"></span>
+<p>A <code>word</code> that has a special meaning to the shell.  Most reserved
+words introduce shell flow control constructs, such as <code>for</code> and
+<code>while</code>.
+</p>
+</dd>
+<dt><code>return status</code></dt>
+<dd><span id="index-return-status"></span>
+<p>A synonym for <code>exit status</code>.
+</p>
+</dd>
+<dt><code>signal</code></dt>
+<dd><span id="index-signal"></span>
+<p>A mechanism by which a process may be notified by the kernel
+of an event occurring in the system.
+</p>
+</dd>
+<dt><code>special builtin</code></dt>
+<dd><span id="index-special-builtin"></span>
+<p>A shell builtin command that has been classified as special by the
+<small>POSIX</small> standard.
+</p>
+</dd>
+<dt><code>token</code></dt>
+<dd><span id="index-token"></span>
+<p>A sequence of characters considered a single unit by the shell.
+It is either a <code>word</code> or an <code>operator</code>.
+</p>
+</dd>
+<dt><code>word</code></dt>
+<dd><span id="index-word"></span>
+<p>A sequence of characters treated as a unit by the shell.
+Words may not include unquoted <code>metacharacters</code>.
+</p></dd>
+</dl>
+
+<hr>
+<span id="Basic-Shell-Features"></span><div class="header">
+<p>
+Next: <a href="#Shell-Builtin-Commands" accesskey="n" rel="next">Shell Builtin Commands</a>, Previous: <a href="#Definitions" accesskey="p" rel="prev">Definitions</a>, Up: <a href="#Top" accesskey="u" rel="up">Top</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Basic-Shell-Features-1"></span><h2 class="chapter">3 Basic Shell Features</h2>
+<span id="index-Bourne-shell"></span>
+
+<p>Bash is an acronym for &lsquo;<samp>Bourne-Again SHell</samp>&rsquo;.
+The Bourne shell is
+the traditional Unix shell originally written by Stephen Bourne.
+All of the Bourne shell builtin commands are available in Bash,
+The rules for evaluation and quoting are taken from the <small>POSIX</small>
+specification for the &lsquo;standard&rsquo; Unix shell.
+</p>
+<p>This chapter briefly summarizes the shell&rsquo;s &lsquo;building blocks&rsquo;:
+commands, control structures, shell functions, shell <i>parameters</i>,
+shell expansions,
+<i>redirections</i>, which are a way to direct input and output from
+and to named files, and how the shell executes commands.
+</p>
+<table class="menu" border="0" cellspacing="0">
+<tr><td align="left" valign="top">&bull; <a href="#Shell-Syntax" accesskey="1">Shell Syntax</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">What your input means to the shell.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Shell-Commands" accesskey="2">Shell Commands</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">The types of commands you can use.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Shell-Functions" accesskey="3">Shell Functions</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Grouping commands by name.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Shell-Parameters" accesskey="4">Shell Parameters</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How the shell stores values.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Shell-Expansions" accesskey="5">Shell Expansions</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How Bash expands parameters and the various
+				expansions available.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Redirections" accesskey="6">Redirections</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">A way to control where input and output go.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Executing-Commands" accesskey="7">Executing Commands</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">What happens when you run a command.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Shell-Scripts" accesskey="8">Shell Scripts</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Executing files of shell commands.
+</td></tr>
+</table>
+
+<hr>
+<span id="Shell-Syntax"></span><div class="header">
+<p>
+Next: <a href="#Shell-Commands" accesskey="n" rel="next">Shell Commands</a>, Up: <a href="#Basic-Shell-Features" accesskey="u" rel="up">Basic Shell Features</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Shell-Syntax-1"></span><h3 class="section">3.1 Shell Syntax</h3>
+<table class="menu" border="0" cellspacing="0">
+<tr><td align="left" valign="top">&bull; <a href="#Shell-Operation" accesskey="1">Shell Operation</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">The basic operation of the shell.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Quoting" accesskey="2">Quoting</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How to remove the special meaning from characters.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Comments" accesskey="3">Comments</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How to specify comments.
+</td></tr>
+</table>
+
+<p>When the shell reads input, it proceeds through a
+sequence of operations.  If the input indicates the beginning of a
+comment, the shell ignores the comment symbol (&lsquo;<samp>#</samp>&rsquo;), and the rest
+of that line.
+</p>                                
+<p>Otherwise, roughly speaking,  the shell reads its input and
+divides the input into words and operators, employing the quoting rules
+to select which meanings to assign various words and characters.
+</p>
+<p>The shell then parses these tokens into commands and other constructs,
+removes the special meaning of certain words or characters, expands
+others, redirects input and output as needed, executes the specified
+command, waits for the command&rsquo;s exit status, and makes that exit status
+available for further inspection or processing.
+</p>
+<hr>
+<span id="Shell-Operation"></span><div class="header">
+<p>
+Next: <a href="#Quoting" accesskey="n" rel="next">Quoting</a>, Up: <a href="#Shell-Syntax" accesskey="u" rel="up">Shell Syntax</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Shell-Operation-1"></span><h4 class="subsection">3.1.1 Shell Operation</h4>
+
+<p>The following is a brief description of the shell&rsquo;s operation when it
+reads and executes a command.  Basically, the shell does the
+following:
+</p>
+<ol>
+<li> Reads its input from a file (see <a href="#Shell-Scripts">Shell Scripts</a>), from a string
+supplied as an argument to the <samp>-c</samp> invocation option
+(see <a href="#Invoking-Bash">Invoking Bash</a>), or from the user&rsquo;s terminal.
+
+</li><li> Breaks the input into words and operators, obeying the quoting rules
+described in <a href="#Quoting">Quoting</a>.  These tokens are separated by
+<code>metacharacters</code>.  Alias expansion is performed by this step
+(see <a href="#Aliases">Aliases</a>).
+
+</li><li> Parses the tokens into simple and compound commands
+(see <a href="#Shell-Commands">Shell Commands</a>).
+
+</li><li> Performs the various shell expansions (see <a href="#Shell-Expansions">Shell Expansions</a>), breaking
+the expanded tokens into lists of filenames (see <a href="#Filename-Expansion">Filename Expansion</a>)
+and commands and arguments.
+
+</li><li> Performs any necessary redirections (see <a href="#Redirections">Redirections</a>) and removes
+the redirection operators and their operands from the argument list.
+
+</li><li> Executes the command (see <a href="#Executing-Commands">Executing Commands</a>).
+
+</li><li> Optionally waits for the command to complete and collects its exit
+status (see <a href="#Exit-Status">Exit Status</a>).
+
+</li></ol>
+
+<hr>
+<span id="Quoting"></span><div class="header">
+<p>
+Next: <a href="#Comments" accesskey="n" rel="next">Comments</a>, Previous: <a href="#Shell-Operation" accesskey="p" rel="prev">Shell Operation</a>, Up: <a href="#Shell-Syntax" accesskey="u" rel="up">Shell Syntax</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Quoting-1"></span><h4 class="subsection">3.1.2 Quoting</h4>
+<span id="index-quoting"></span>
+<table class="menu" border="0" cellspacing="0">
+<tr><td align="left" valign="top">&bull; <a href="#Escape-Character" accesskey="1">Escape Character</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How to remove the special meaning from a single
+			character.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Single-Quotes" accesskey="2">Single Quotes</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How to inhibit all interpretation of a sequence
+			of characters.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Double-Quotes" accesskey="3">Double Quotes</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How to suppress most of the interpretation of a
+			sequence of characters.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#ANSI_002dC-Quoting" accesskey="4">ANSI-C Quoting</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How to expand ANSI-C sequences in quoted strings.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Locale-Translation" accesskey="5">Locale Translation</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How to translate strings into different languages.
+</td></tr>
+</table>
+
+<p>Quoting is used to remove the special meaning of certain
+characters or words to the shell.  Quoting can be used to
+disable special treatment for special characters, to prevent
+reserved words from being recognized as such, and to prevent
+parameter expansion.
+</p>
+<p>Each of the shell metacharacters (see <a href="#Definitions">Definitions</a>)
+has special meaning to the shell and must be quoted if it is to
+represent itself.
+When the command history expansion facilities are being used
+(see <a href="#History-Interaction">History Interaction</a>), the
+<var>history expansion</var> character, usually &lsquo;<samp>!</samp>&rsquo;, must be quoted
+to prevent history expansion.  See <a href="#Bash-History-Facilities">Bash History Facilities</a>, for
+more details concerning history expansion.
+</p>
+<p>There are three quoting mechanisms: the
+<var>escape character</var>, single quotes, and double quotes.
+</p>
+<hr>
+<span id="Escape-Character"></span><div class="header">
+<p>
+Next: <a href="#Single-Quotes" accesskey="n" rel="next">Single Quotes</a>, Up: <a href="#Quoting" accesskey="u" rel="up">Quoting</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Escape-Character-1"></span><h4 class="subsubsection">3.1.2.1 Escape Character</h4>
+<p>A non-quoted backslash &lsquo;<samp>\</samp>&rsquo; is the Bash escape character.
+It preserves the literal value of the next character that follows,
+with the exception of <code>newline</code>.  If a <code>\newline</code> pair
+appears, and the backslash itself is not quoted, the <code>\newline</code>
+is treated as a line continuation (that is, it is removed from
+the input stream and effectively ignored).
+</p>
+<hr>
+<span id="Single-Quotes"></span><div class="header">
+<p>
+Next: <a href="#Double-Quotes" accesskey="n" rel="next">Double Quotes</a>, Previous: <a href="#Escape-Character" accesskey="p" rel="prev">Escape Character</a>, Up: <a href="#Quoting" accesskey="u" rel="up">Quoting</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Single-Quotes-1"></span><h4 class="subsubsection">3.1.2.2 Single Quotes</h4>
+
+<p>Enclosing characters in single quotes (&lsquo;<samp>'</samp>&rsquo;) preserves the literal value
+of each character within the quotes.  A single quote may not occur
+between single quotes, even when preceded by a backslash.
+</p>
+<hr>
+<span id="Double-Quotes"></span><div class="header">
+<p>
+Next: <a href="#ANSI_002dC-Quoting" accesskey="n" rel="next">ANSI-C Quoting</a>, Previous: <a href="#Single-Quotes" accesskey="p" rel="prev">Single Quotes</a>, Up: <a href="#Quoting" accesskey="u" rel="up">Quoting</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Double-Quotes-1"></span><h4 class="subsubsection">3.1.2.3 Double Quotes</h4>
+
+<p>Enclosing characters in double quotes (&lsquo;<samp>&quot;</samp>&rsquo;) preserves the literal value
+of all characters within the quotes, with the exception of
+&lsquo;<samp>$</samp>&rsquo;, &lsquo;<samp>`</samp>&rsquo;, &lsquo;<samp>\</samp>&rsquo;,
+and, when history expansion is enabled, &lsquo;<samp>!</samp>&rsquo;.
+When the shell is in
+<small>POSIX</small> mode (see <a href="#Bash-POSIX-Mode">Bash POSIX Mode</a>),
+the &lsquo;<samp>!</samp>&rsquo; has no special meaning
+within double quotes, even when history expansion is enabled.
+The characters &lsquo;<samp>$</samp>&rsquo; and &lsquo;<samp>`</samp>&rsquo;
+retain their special meaning within double quotes (see <a href="#Shell-Expansions">Shell Expansions</a>).
+The backslash retains its special meaning only when followed by one of
+the following characters:
+&lsquo;<samp>$</samp>&rsquo;, &lsquo;<samp>`</samp>&rsquo;, &lsquo;<samp>&quot;</samp>&rsquo;, &lsquo;<samp>\</samp>&rsquo;, or <code>newline</code>.
+Within double quotes, backslashes that are followed by one of these
+characters are removed.  Backslashes preceding characters without a
+special meaning are left unmodified.
+A double quote may be quoted within double quotes by preceding it with
+a backslash.
+If enabled, history expansion will be performed unless an &lsquo;<samp>!</samp>&rsquo;
+appearing in double quotes is escaped using a backslash.
+The backslash preceding the &lsquo;<samp>!</samp>&rsquo; is not removed.
+</p>
+<p>The special parameters &lsquo;<samp>*</samp>&rsquo; and &lsquo;<samp>@</samp>&rsquo; have special meaning
+when in double quotes (see <a href="#Shell-Parameter-Expansion">Shell Parameter Expansion</a>).
+</p>
+<hr>
+<span id="ANSI_002dC-Quoting"></span><div class="header">
+<p>
+Next: <a href="#Locale-Translation" accesskey="n" rel="next">Locale Translation</a>, Previous: <a href="#Double-Quotes" accesskey="p" rel="prev">Double Quotes</a>, Up: <a href="#Quoting" accesskey="u" rel="up">Quoting</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="ANSI_002dC-Quoting-1"></span><h4 class="subsubsection">3.1.2.4 ANSI-C Quoting</h4>
+<span id="index-quoting_002c-ANSI"></span>
+
+<p>Words of the form <code>$'<var>string</var>'</code> are treated specially.  The
+word expands to <var>string</var>, with backslash-escaped characters replaced
+as specified by the ANSI C standard.  Backslash escape sequences, if
+present, are decoded as follows:
+</p>
+<dl compact="compact">
+<dt><code>\a</code></dt>
+<dd><p>alert (bell)
+</p></dd>
+<dt><code>\b</code></dt>
+<dd><p>backspace
+</p></dd>
+<dt><code>\e</code></dt>
+<dt><code>\E</code></dt>
+<dd><p>an escape character (not ANSI C)
+</p></dd>
+<dt><code>\f</code></dt>
+<dd><p>form feed
+</p></dd>
+<dt><code>\n</code></dt>
+<dd><p>newline
+</p></dd>
+<dt><code>\r</code></dt>
+<dd><p>carriage return
+</p></dd>
+<dt><code>\t</code></dt>
+<dd><p>horizontal tab
+</p></dd>
+<dt><code>\v</code></dt>
+<dd><p>vertical tab
+</p></dd>
+<dt><code>\\</code></dt>
+<dd><p>backslash
+</p></dd>
+<dt><code>\'</code></dt>
+<dd><p>single quote
+</p></dd>
+<dt><code>\&quot;</code></dt>
+<dd><p>double quote
+</p></dd>
+<dt><code>\?</code></dt>
+<dd><p>question mark
+</p></dd>
+<dt><code>\<var>nnn</var></code></dt>
+<dd><p>the eight-bit character whose value is the octal value <var>nnn</var>
+(one to three octal digits)
+</p></dd>
+<dt><code>\x<var>HH</var></code></dt>
+<dd><p>the eight-bit character whose value is the hexadecimal value <var>HH</var>
+(one or two hex digits)
+</p></dd>
+<dt><code>\u<var>HHHH</var></code></dt>
+<dd><p>the Unicode (ISO/IEC 10646) character whose value is the hexadecimal value
+<var>HHHH</var> (one to four hex digits)
+</p></dd>
+<dt><code>\U<var>HHHHHHHH</var></code></dt>
+<dd><p>the Unicode (ISO/IEC 10646) character whose value is the hexadecimal value
+<var>HHHHHHHH</var> (one to eight hex digits)
+</p></dd>
+<dt><code>\c<var>x</var></code></dt>
+<dd><p>a control-<var>x</var> character
+</p></dd>
+</dl>
+
+<p>The expanded result is single-quoted, as if the dollar sign had not
+been present.
+</p>
+<hr>
+<span id="Locale-Translation"></span><div class="header">
+<p>
+Previous: <a href="#ANSI_002dC-Quoting" accesskey="p" rel="prev">ANSI-C Quoting</a>, Up: <a href="#Quoting" accesskey="u" rel="up">Quoting</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Locale_002dSpecific-Translation"></span><h4 class="subsubsection">3.1.2.5 Locale-Specific Translation</h4>
+<span id="index-localization"></span>
+<span id="index-internationalization"></span>
+<span id="index-native-languages"></span>
+<span id="index-translation_002c-native-languages"></span>
+
+<p>A double-quoted string preceded by a dollar sign (&lsquo;<samp>$</samp>&rsquo;)
+will cause the string to be translated according to the current locale.
+The <var>gettext</var> infrastructure performs the message catalog lookup and 
+translation, using the <code>LC_MESSAGES</code> and <code>TEXTDOMAIN</code> shell
+variables, as explained below. See the gettext documentation for additional
+details.
+If the current locale is <code>C</code> or <code>POSIX</code>,
+or if there are no translations available,
+the dollar sign is ignored.
+If the string is translated and replaced, the replacement is
+double-quoted.
+</p>
+<span id="index-LC_005fMESSAGES"></span>
+<span id="index-TEXTDOMAIN"></span>
+<span id="index-TEXTDOMAINDIR"></span>
+<p>Some systems use the message catalog selected by the <code>LC_MESSAGES</code>
+shell variable.  Others create the name of the message catalog from the
+value of the <code>TEXTDOMAIN</code> shell variable, possibly adding a
+suffix of &lsquo;<samp>.mo</samp>&rsquo;.  If you use the <code>TEXTDOMAIN</code> variable, you
+may need to set the <code>TEXTDOMAINDIR</code> variable to the location of
+the message catalog files.  Still others use both variables in this
+fashion:
+<code>TEXTDOMAINDIR</code>/<code>LC_MESSAGES</code>/LC_MESSAGES/<code>TEXTDOMAIN</code>.mo.
+</p>
+<hr>
+<span id="Comments"></span><div class="header">
+<p>
+Previous: <a href="#Quoting" accesskey="p" rel="prev">Quoting</a>, Up: <a href="#Shell-Syntax" accesskey="u" rel="up">Shell Syntax</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Comments-1"></span><h4 class="subsection">3.1.3 Comments</h4>
+<span id="index-comments_002c-shell"></span>
+
+<p>In a non-interactive shell, or an interactive shell in which the
+<code>interactive_comments</code> option to the <code>shopt</code>
+builtin is enabled (see <a href="#The-Shopt-Builtin">The Shopt Builtin</a>),
+a word beginning with &lsquo;<samp>#</samp>&rsquo;
+causes that word and all remaining characters on that line to
+be ignored.  An interactive shell without the <code>interactive_comments</code>
+option enabled does not allow comments.  The <code>interactive_comments</code>
+option is on by default in interactive shells.
+See <a href="#Interactive-Shells">Interactive Shells</a>, for a description of what makes
+a shell interactive.
+</p>
+<hr>
+<span id="Shell-Commands"></span><div class="header">
+<p>
+Next: <a href="#Shell-Functions" accesskey="n" rel="next">Shell Functions</a>, Previous: <a href="#Shell-Syntax" accesskey="p" rel="prev">Shell Syntax</a>, Up: <a href="#Basic-Shell-Features" accesskey="u" rel="up">Basic Shell Features</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Shell-Commands-1"></span><h3 class="section">3.2 Shell Commands</h3>
+<span id="index-commands_002c-shell"></span>
+
+<p>A simple shell command such as <code>echo a b c</code> consists of the command
+itself followed by arguments, separated by spaces.
+</p>
+<p>More complex shell commands are composed of simple commands arranged together
+in a variety of ways: in a pipeline in which the output of one command
+becomes the input of a second, in a loop or conditional construct, or in
+some other grouping.
+</p>
+<table class="menu" border="0" cellspacing="0">
+<tr><td align="left" valign="top">&bull; <a href="#Reserved-Words" accesskey="1">Reserved Words</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Words that have special meaning to the shell.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Simple-Commands" accesskey="2">Simple Commands</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">The most common type of command.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Pipelines" accesskey="3">Pipelines</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Connecting the input and output of several
+				commands.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Lists" accesskey="4">Lists</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How to execute commands sequentially.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Compound-Commands" accesskey="5">Compound Commands</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Shell commands for control flow.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Coprocesses" accesskey="6">Coprocesses</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Two-way communication between commands.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#GNU-Parallel" accesskey="7">GNU Parallel</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Running commands in parallel.
+</td></tr>
+</table>
+
+<hr>
+<span id="Reserved-Words"></span><div class="header">
+<p>
+Next: <a href="#Simple-Commands" accesskey="n" rel="next">Simple Commands</a>, Up: <a href="#Shell-Commands" accesskey="u" rel="up">Shell Commands</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Reserved-Words-1"></span><h4 class="subsection">3.2.1 Reserved Words</h4>
+<span id="index-reserved-words"></span>
+
+<p>Reserved words are words that have special meaning to the shell.
+They are used to begin and end the shell&rsquo;s compound commands.
+</p>
+<p>The following words are recognized as reserved when unquoted and 
+the first word of a command (see below for exceptions):
+</p>
+<table>
+<tr><td width="10%"><code>if</code></td><td width="10%"><code>then</code></td><td width="10%"><code>elif</code></td><td width="10%"><code>else</code></td><td width="12%"><code>fi</code></td><td width="10%"><code>time</code></td></tr>
+<tr><td width="10%"><code>for</code></td><td width="10%"><code>in</code></td><td width="10%"><code>until</code></td><td width="10%"><code>while</code></td><td width="12%"><code>do</code></td><td width="10%"><code>done</code></td></tr>
+<tr><td width="10%"><code>case</code></td><td width="10%"><code>esac</code></td><td width="10%"><code>coproc</code></td><td width="10%"><code>select</code></td><td width="12%"><code>function</code></td></tr>
+<tr><td width="10%"><code>{</code></td><td width="10%"><code>}</code></td><td width="10%"><code>[[</code></td><td width="10%"><code>]]</code></td><td width="12%"><code>!</code></td></tr>
+</table>
+
+<p><code>in</code> is recognized as a reserved word if it is the third word of a
+<code>case</code> or <code>select</code> command.
+<code>in</code> and <code>do</code> are recognized as reserved
+words if they are the third word in a <code>for</code> command.
+</p>
+<hr>
+<span id="Simple-Commands"></span><div class="header">
+<p>
+Next: <a href="#Pipelines" accesskey="n" rel="next">Pipelines</a>, Previous: <a href="#Reserved-Words" accesskey="p" rel="prev">Reserved Words</a>, Up: <a href="#Shell-Commands" accesskey="u" rel="up">Shell Commands</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Simple-Commands-1"></span><h4 class="subsection">3.2.2 Simple Commands</h4>
+<span id="index-commands_002c-simple"></span>
+
+<p>A simple command is the kind of command encountered most often.
+It&rsquo;s just a sequence of words separated by <code>blank</code>s, terminated
+by one of the shell&rsquo;s control operators (see <a href="#Definitions">Definitions</a>).  The
+first word generally specifies a command to be executed, with the
+rest of the words being that command&rsquo;s arguments.
+</p>
+<p>The return status (see <a href="#Exit-Status">Exit Status</a>) of a simple command is
+its exit status as provided
+by the <small>POSIX</small> 1003.1 <code>waitpid</code> function, or 128+<var>n</var> if
+the command was terminated by signal <var>n</var>.
+</p>
+<hr>
+<span id="Pipelines"></span><div class="header">
+<p>
+Next: <a href="#Lists" accesskey="n" rel="next">Lists</a>, Previous: <a href="#Simple-Commands" accesskey="p" rel="prev">Simple Commands</a>, Up: <a href="#Shell-Commands" accesskey="u" rel="up">Shell Commands</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Pipelines-1"></span><h4 class="subsection">3.2.3 Pipelines</h4>
+<span id="index-pipeline"></span>
+<span id="index-commands_002c-pipelines"></span>
+
+<p>A <code>pipeline</code> is a sequence of one or more commands separated by
+one of the control operators &lsquo;<samp>|</samp>&rsquo; or &lsquo;<samp>|&amp;</samp>&rsquo;.
+</p>
+<span id="index-time"></span>
+<span id="index-_0021"></span>
+<span id="index-command-timing"></span>
+<p>The format for a pipeline is
+</p><div class="example">
+<pre class="example">[time [-p]] [!] <var>command1</var> [ | or |&amp; <var>command2</var> ] &hellip;
+</pre></div>
+
+<p>The output of each command in the pipeline is connected via a pipe
+to the input of the next command.
+That is, each command reads the previous command&rsquo;s output.  This
+connection is performed before any redirections specified by the
+command.
+</p>
+<p>If &lsquo;<samp>|&amp;</samp>&rsquo; is used, <var>command1</var>&rsquo;s standard error, in addition to
+its standard output, is connected to
+<var>command2</var>&rsquo;s standard input through the pipe;
+it is shorthand for <code>2&gt;&amp;1 |</code>.
+This implicit redirection of the standard error to the standard output is
+performed after any redirections specified by the command.
+</p>
+<p>The reserved word <code>time</code> causes timing statistics
+to be printed for the pipeline once it finishes.
+The statistics currently consist of elapsed (wall-clock) time and
+user and system time consumed by the command&rsquo;s execution.
+The <samp>-p</samp> option changes the output format to that specified
+by <small>POSIX</small>.
+When the shell is in <small>POSIX</small> mode (see <a href="#Bash-POSIX-Mode">Bash POSIX Mode</a>),
+it does not recognize <code>time</code> as a reserved word if the next
+token begins with a &lsquo;<samp>-</samp>&rsquo;.
+The <code>TIMEFORMAT</code> variable may be set to a format string that
+specifies how the timing information should be displayed.
+See <a href="#Bash-Variables">Bash Variables</a>, for a description of the available formats.
+The use of <code>time</code> as a reserved word permits the timing of
+shell builtins, shell functions, and pipelines.  An external
+<code>time</code> command cannot time these easily.
+</p>
+<p>When the shell is in <small>POSIX</small> mode (see <a href="#Bash-POSIX-Mode">Bash POSIX Mode</a>), <code>time</code>
+may be followed by a newline.  In this case, the shell displays the
+total user and system time consumed by the shell and its children.
+The <code>TIMEFORMAT</code> variable may be used to specify the format of
+the time information.
+</p>
+<p>If the pipeline is not executed asynchronously (see <a href="#Lists">Lists</a>), the
+shell waits for all commands in the pipeline to complete.
+</p>
+<p>Each command in a pipeline is executed in its own subshell, which is a
+separate process (see <a href="#Command-Execution-Environment">Command Execution Environment</a>).
+If the <code>lastpipe</code> option is enabled using the <code>shopt</code> builtin
+(see <a href="#The-Shopt-Builtin">The Shopt Builtin</a>),
+the last element of a pipeline may be run by the shell process.
+</p>
+<p>The exit
+status of a pipeline is the exit status of the last command in the
+pipeline, unless the <code>pipefail</code> option is enabled
+(see <a href="#The-Set-Builtin">The Set Builtin</a>).
+If <code>pipefail</code> is enabled, the pipeline&rsquo;s return status is the
+value of the last (rightmost) command to exit with a non-zero status,
+or zero if all commands exit successfully.
+If the reserved word &lsquo;<samp>!</samp>&rsquo; precedes the pipeline, the
+exit status is the logical negation of the exit status as described
+above.
+The shell waits for all commands in the pipeline to terminate before
+returning a value.
+</p>
+<hr>
+<span id="Lists"></span><div class="header">
+<p>
+Next: <a href="#Compound-Commands" accesskey="n" rel="next">Compound Commands</a>, Previous: <a href="#Pipelines" accesskey="p" rel="prev">Pipelines</a>, Up: <a href="#Shell-Commands" accesskey="u" rel="up">Shell Commands</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Lists-of-Commands"></span><h4 class="subsection">3.2.4 Lists of Commands</h4>
+<span id="index-commands_002c-lists"></span>
+
+<p>A <code>list</code> is a sequence of one or more pipelines separated by one
+of the operators &lsquo;<samp>;</samp>&rsquo;, &lsquo;<samp>&amp;</samp>&rsquo;, &lsquo;<samp>&amp;&amp;</samp>&rsquo;, or &lsquo;<samp>||</samp>&rsquo;,
+and optionally terminated by one of &lsquo;<samp>;</samp>&rsquo;, &lsquo;<samp>&amp;</samp>&rsquo;, or a
+<code>newline</code>.
+</p>
+<p>Of these list operators, &lsquo;<samp>&amp;&amp;</samp>&rsquo; and &lsquo;<samp>||</samp>&rsquo;
+have equal precedence, followed by &lsquo;<samp>;</samp>&rsquo; and &lsquo;<samp>&amp;</samp>&rsquo;,
+which have equal precedence.
+</p>
+<p>A sequence of one or more newlines may appear in a <code>list</code>
+to delimit commands, equivalent to a semicolon.
+</p>
+<p>If a command is terminated by the control operator &lsquo;<samp>&amp;</samp>&rsquo;,
+the shell executes the command asynchronously in a subshell.
+This is known as executing the command in the <var>background</var>,
+and these are referred to as <var>asynchronous</var> commands.
+The shell does not wait for the command to finish, and the return
+status is 0 (true).
+When job control is not active (see <a href="#Job-Control">Job Control</a>),
+the standard input for asynchronous commands, in the absence of any
+explicit redirections, is redirected from <code>/dev/null</code>.
+</p>
+<p>Commands separated by a &lsquo;<samp>;</samp>&rsquo; are executed sequentially; the shell
+waits for each command to terminate in turn.  The return status is the
+exit status of the last command executed.
+</p>
+<p><small>AND</small> and <small>OR</small> lists are sequences of one or more pipelines
+separated by the control operators &lsquo;<samp>&amp;&amp;</samp>&rsquo; and &lsquo;<samp>||</samp>&rsquo;,
+respectively.  <small>AND</small> and <small>OR</small> lists are executed with left
+associativity.
+</p>
+<p>An <small>AND</small> list has the form
+</p><div class="example">
+<pre class="example"><var>command1</var> &amp;&amp; <var>command2</var>
+</pre></div>
+
+<p><var>command2</var> is executed if, and only if, <var>command1</var>
+returns an exit status of zero (success).
+</p>
+<p>An <small>OR</small> list has the form
+</p><div class="example">
+<pre class="example"><var>command1</var> || <var>command2</var>
+</pre></div>
+
+<p><var>command2</var> is executed if, and only if, <var>command1</var>
+returns a non-zero exit status.
+</p>
+<p>The return status of
+<small>AND</small> and <small>OR</small> lists is the exit status of the last command
+executed in the list.
+</p>
+<hr>
+<span id="Compound-Commands"></span><div class="header">
+<p>
+Next: <a href="#Coprocesses" accesskey="n" rel="next">Coprocesses</a>, Previous: <a href="#Lists" accesskey="p" rel="prev">Lists</a>, Up: <a href="#Shell-Commands" accesskey="u" rel="up">Shell Commands</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Compound-Commands-1"></span><h4 class="subsection">3.2.5 Compound Commands</h4>
+<span id="index-commands_002c-compound"></span>
+
+<table class="menu" border="0" cellspacing="0">
+<tr><td align="left" valign="top">&bull; <a href="#Looping-Constructs" accesskey="1">Looping Constructs</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Shell commands for iterative action.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Conditional-Constructs" accesskey="2">Conditional Constructs</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Shell commands for conditional execution.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Command-Grouping" accesskey="3">Command Grouping</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Ways to group commands.
+</td></tr>
+</table>
+
+<p>Compound commands are the shell programming language constructs.
+Each construct begins with a reserved word or control operator and is
+terminated by a corresponding reserved word or operator.
+Any redirections (see <a href="#Redirections">Redirections</a>) associated with a compound command
+apply to all commands within that compound command unless explicitly overridden.
+</p>
+<p>In most cases a list of commands in a compound command&rsquo;s description may be
+separated from the rest of the command by one or more newlines, and may be
+followed by a newline in place of a semicolon.
+</p>
+<p>Bash provides looping constructs, conditional commands, and mechanisms
+to group commands and execute them as a unit.
+</p>
+<hr>
+<span id="Looping-Constructs"></span><div class="header">
+<p>
+Next: <a href="#Conditional-Constructs" accesskey="n" rel="next">Conditional Constructs</a>, Up: <a href="#Compound-Commands" accesskey="u" rel="up">Compound Commands</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Looping-Constructs-1"></span><h4 class="subsubsection">3.2.5.1 Looping Constructs</h4>
+<span id="index-commands_002c-looping"></span>
+
+<p>Bash supports the following looping constructs.
+</p>
+<p>Note that wherever a &lsquo;<samp>;</samp>&rsquo; appears in the description of a
+command&rsquo;s syntax, it may be replaced with one or more newlines.
+</p>
+<dl compact="compact">
+<dt><code>until</code></dt>
+<dd><span id="index-until"></span>
+<span id="index-do"></span>
+<span id="index-done"></span>
+<p>The syntax of the <code>until</code> command is:
+</p>
+<div class="example">
+<pre class="example">until <var>test-commands</var>; do <var>consequent-commands</var>; done
+</pre></div>
+
+<p>Execute <var>consequent-commands</var> as long as
+<var>test-commands</var> has an exit status which is not zero.
+The return status is the exit status of the last command executed
+in <var>consequent-commands</var>, or zero if none was executed.
+</p>
+</dd>
+<dt><code>while</code></dt>
+<dd><span id="index-while"></span>
+<p>The syntax of the <code>while</code> command is:
+</p>
+<div class="example">
+<pre class="example">while <var>test-commands</var>; do <var>consequent-commands</var>; done
+</pre></div>
+
+<p>Execute <var>consequent-commands</var> as long as
+<var>test-commands</var> has an exit status of zero.
+The return status is the exit status of the last command executed
+in <var>consequent-commands</var>, or zero if none was executed.
+</p>
+</dd>
+<dt><code>for</code></dt>
+<dd><span id="index-for"></span>
+<p>The syntax of the <code>for</code> command is:
+</p>
+<div class="example">
+<pre class="example">for <var>name</var> [ [in [<var>words</var> &hellip;] ] ; ] do <var>commands</var>; done
+</pre></div>
+
+<p>Expand <var>words</var> (see <a href="#Shell-Expansions">Shell Expansions</a>), and execute <var>commands</var>
+once for each member
+in the resultant list, with <var>name</var> bound to the current member.
+If &lsquo;<samp>in <var>words</var></samp>&rsquo; is not present, the <code>for</code> command
+executes the <var>commands</var> once for each positional parameter that is
+set, as if &lsquo;<samp>in &quot;$@&quot;</samp>&rsquo; had been specified
+(see <a href="#Special-Parameters">Special Parameters</a>).
+</p>
+<p>The return status is the exit status of the last command that executes.
+If there are no items in the expansion of <var>words</var>, no commands are
+executed, and the return status is zero.
+</p>
+<p>An alternate form of the <code>for</code> command is also supported:
+</p>
+<div class="example">
+<pre class="example">for (( <var>expr1</var> ; <var>expr2</var> ; <var>expr3</var> )) ; do <var>commands</var> ; done
+</pre></div>
+
+<p>First, the arithmetic expression <var>expr1</var> is evaluated according
+to the rules described below (see <a href="#Shell-Arithmetic">Shell Arithmetic</a>).
+The arithmetic expression <var>expr2</var> is then evaluated repeatedly
+until it evaluates to zero.   
+Each time <var>expr2</var> evaluates to a non-zero value, <var>commands</var> are
+executed and the arithmetic expression <var>expr3</var> is evaluated.       
+If any expression is omitted, it behaves as if it evaluates to 1.
+The return value is the exit status of the last command in <var>commands</var>
+that is executed, or false if any of the expressions is invalid.
+</p></dd>
+</dl>
+
+<p>The <code>break</code> and <code>continue</code> builtins (see <a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a>)
+may be used to control loop execution.
+</p>
+<hr>
+<span id="Conditional-Constructs"></span><div class="header">
+<p>
+Next: <a href="#Command-Grouping" accesskey="n" rel="next">Command Grouping</a>, Previous: <a href="#Looping-Constructs" accesskey="p" rel="prev">Looping Constructs</a>, Up: <a href="#Compound-Commands" accesskey="u" rel="up">Compound Commands</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Conditional-Constructs-1"></span><h4 class="subsubsection">3.2.5.2 Conditional Constructs</h4>
+<span id="index-commands_002c-conditional"></span>
+
+<dl compact="compact">
+<dt><code>if</code></dt>
+<dd><span id="index-if"></span>
+<span id="index-then"></span>
+<span id="index-else"></span>
+<span id="index-elif"></span>
+<span id="index-fi"></span>
+<p>The syntax of the <code>if</code> command is:
+</p>
+<div class="example">
+<pre class="example">if <var>test-commands</var>; then
+  <var>consequent-commands</var>;
+[elif <var>more-test-commands</var>; then
+  <var>more-consequents</var>;]
+[else <var>alternate-consequents</var>;]
+fi
+</pre></div>
+
+<p>The <var>test-commands</var> list is executed, and if its return status is zero,
+the <var>consequent-commands</var> list is executed.
+If <var>test-commands</var> returns a non-zero status, each <code>elif</code> list
+is executed in turn, and if its exit status is zero,
+the corresponding <var>more-consequents</var> is executed and the   
+command completes.
+If &lsquo;<samp>else <var>alternate-consequents</var></samp>&rsquo; is present, and
+the final command in the final <code>if</code> or <code>elif</code> clause
+has a non-zero exit status, then <var>alternate-consequents</var> is executed.
+The return status is the exit status of the last command executed, or
+zero if no condition tested true.
+</p>
+</dd>
+<dt><code>case</code></dt>
+<dd><span id="index-case"></span>
+<span id="index-in"></span>
+<span id="index-esac"></span>
+<p>The syntax of the <code>case</code> command is:
+</p>
+<div class="example">
+<pre class="example">case <var>word</var> in
+    [ [(] <var>pattern</var> [| <var>pattern</var>]&hellip;) <var>command-list</var> ;;]&hellip;
+esac
+</pre></div>
+
+<p><code>case</code> will selectively execute the <var>command-list</var> corresponding to
+the first <var>pattern</var> that matches <var>word</var>.
+The match is performed according
+to the rules described below in <a href="#Pattern-Matching">Pattern Matching</a>.
+If the <code>nocasematch</code> shell option
+(see the description of <code>shopt</code> in <a href="#The-Shopt-Builtin">The Shopt Builtin</a>)
+is enabled, the match is performed without regard to the case
+of alphabetic characters.
+The &lsquo;<samp>|</samp>&rsquo; is used to separate multiple patterns, and the &lsquo;<samp>)</samp>&rsquo;
+operator terminates a pattern list.
+A list of patterns and an associated command-list is known
+as a <var>clause</var>.
+</p>
+<p>Each clause must be terminated with &lsquo;<samp>;;</samp>&rsquo;, &lsquo;<samp>;&amp;</samp>&rsquo;, or &lsquo;<samp>;;&amp;</samp>&rsquo;.
+The <var>word</var> undergoes tilde expansion, parameter expansion, command
+substitution, arithmetic expansion, and quote removal
+(see <a href="#Shell-Parameter-Expansion">Shell Parameter Expansion</a>)
+before matching is
+attempted.  Each <var>pattern</var> undergoes tilde expansion, parameter
+expansion, command substitution, and arithmetic expansion.
+</p>
+<p>There may be an arbitrary number of <code>case</code> clauses, each terminated
+by a &lsquo;<samp>;;</samp>&rsquo;, &lsquo;<samp>;&amp;</samp>&rsquo;, or &lsquo;<samp>;;&amp;</samp>&rsquo;.
+The first pattern that matches determines the
+command-list that is executed.
+It&rsquo;s a common idiom to use &lsquo;<samp>*</samp>&rsquo; as the final pattern to define the
+default case, since that pattern will always match.
+</p>
+<p>Here is an example using <code>case</code> in a script that could be used to
+describe one interesting feature of an animal:
+</p>
+<div class="example">
+<pre class="example">echo -n &quot;Enter the name of an animal: &quot;
+read ANIMAL
+echo -n &quot;The $ANIMAL has &quot;
+case $ANIMAL in
+  horse | dog | cat) echo -n &quot;four&quot;;;
+  man | kangaroo ) echo -n &quot;two&quot;;;
+  *) echo -n &quot;an unknown number of&quot;;;
+esac
+echo &quot; legs.&quot;
+</pre></div>
+
+
+<p>If the &lsquo;<samp>;;</samp>&rsquo; operator is used, no subsequent matches are attempted after
+the first pattern match.
+Using &lsquo;<samp>;&amp;</samp>&rsquo;  in place of &lsquo;<samp>;;</samp>&rsquo; causes execution to continue with
+the <var>command-list</var> associated with the next clause, if any.
+Using &lsquo;<samp>;;&amp;</samp>&rsquo; in place of &lsquo;<samp>;;</samp>&rsquo; causes the shell to test the patterns
+in the next clause, if any, and execute any associated <var>command-list</var>
+on a successful match,
+continuing the case statement execution as if the pattern list had not matched.
+</p>
+<p>The return status is zero if no <var>pattern</var> is matched.  Otherwise, the
+return status is the exit status of the <var>command-list</var> executed.
+</p>
+</dd>
+<dt><code>select</code></dt>
+<dd><span id="index-select"></span>
+
+<p>The <code>select</code> construct allows the easy generation of menus.
+It has almost the same syntax as the <code>for</code> command:
+</p>
+<div class="example">
+<pre class="example">select <var>name</var> [in <var>words</var> &hellip;]; do <var>commands</var>; done
+</pre></div>
+
+<p>The list of words following <code>in</code> is expanded, generating a list
+of items.  The set of expanded words is printed on the standard
+error output stream, each preceded by a number.  If the
+&lsquo;<samp>in <var>words</var></samp>&rsquo; is omitted, the positional parameters are printed,
+as if &lsquo;<samp>in &quot;$@&quot;</samp>&rsquo; had been specified.
+The <code>PS3</code> prompt is then displayed and a line is read from the
+standard input.
+If the line consists of a number corresponding to one of the displayed
+words, then the value of <var>name</var> is set to that word.
+If the line is empty, the words and prompt are displayed again.
+If <code>EOF</code> is read, the <code>select</code> command completes.
+Any other value read causes <var>name</var> to be set to null.
+The line read is saved in the variable <code>REPLY</code>.
+</p>
+<p>The <var>commands</var> are executed after each selection until a
+<code>break</code> command is executed, at which
+point the <code>select</code> command completes.
+</p>
+<p>Here is an example that allows the user to pick a filename from the
+current directory, and displays the name and index of the file
+selected.
+</p>
+<div class="example">
+<pre class="example">select fname in *;
+do
+	echo you picked $fname \($REPLY\)
+	break;
+done
+</pre></div>
+
+</dd>
+<dt><code>((&hellip;))</code></dt>
+<dd><div class="example">
+<pre class="example">(( <var>expression</var> ))
+</pre></div>
+
+<p>The arithmetic <var>expression</var> is evaluated according to the rules
+described below (see <a href="#Shell-Arithmetic">Shell Arithmetic</a>).
+If the value of the expression is non-zero, the return status is 0;
+otherwise the return status is 1.  This is exactly equivalent to
+</p><div class="example">
+<pre class="example">let &quot;<var>expression</var>&quot;
+</pre></div>
+<p>See <a href="#Bash-Builtins">Bash Builtins</a>, for a full description of the <code>let</code> builtin.
+</p>
+</dd>
+<dt><code>[[&hellip;]]</code></dt>
+<dd><span id="index-_005b_005b"></span>
+<span id="index-_005d_005d"></span>
+<div class="example">
+<pre class="example">[[ <var>expression</var> ]]
+</pre></div>
+
+<p>Return a status of 0 or 1 depending on the evaluation of
+the conditional expression <var>expression</var>.
+Expressions are composed of the primaries described below in
+<a href="#Bash-Conditional-Expressions">Bash Conditional Expressions</a>.
+Word splitting and filename expansion are not performed on the words
+between the <code>[[</code> and <code>]]</code>; tilde expansion, parameter and
+variable expansion, arithmetic expansion, command substitution, process
+substitution, and quote removal are performed.
+Conditional operators such as &lsquo;<samp>-f</samp>&rsquo; must be unquoted to be recognized
+as primaries.
+</p>
+<p>When used with <code>[[</code>, the &lsquo;<samp>&lt;</samp>&rsquo; and &lsquo;<samp>&gt;</samp>&rsquo; operators sort
+lexicographically using the current locale.
+</p>
+<p>When the &lsquo;<samp>==</samp>&rsquo; and &lsquo;<samp>!=</samp>&rsquo; operators are used, the string to the
+right of the operator is considered a pattern and matched according
+to the rules described below in <a href="#Pattern-Matching">Pattern Matching</a>,
+as if the <code>extglob</code> shell option were enabled.
+The &lsquo;<samp>=</samp>&rsquo; operator is identical to &lsquo;<samp>==</samp>&rsquo;.
+If the <code>nocasematch</code> shell option
+(see the description of <code>shopt</code> in <a href="#The-Shopt-Builtin">The Shopt Builtin</a>)
+is enabled, the match is performed without regard to the case
+of alphabetic characters.
+The return value is 0 if the string matches (&lsquo;<samp>==</samp>&rsquo;) or does not
+match (&lsquo;<samp>!=</samp>&rsquo;) the pattern, and 1 otherwise.
+Any part of the pattern may be quoted to force the quoted portion
+to be matched as a string.
+</p>
+<p>An additional binary operator, &lsquo;<samp>=~</samp>&rsquo;, is available, with the same
+precedence as &lsquo;<samp>==</samp>&rsquo; and &lsquo;<samp>!=</samp>&rsquo;.
+When it is used, the string to the right of the operator is considered
+a <small>POSIX</small> extended regular expression and matched accordingly
+(using the <small>POSIX</small> <code>regcomp</code> and <code>regexec</code> interfaces
+usually described in <i>regex</i>(3)).
+The return value is 0 if the string matches
+the pattern, and 1 otherwise.
+If the regular expression is syntactically incorrect, the conditional
+expression&rsquo;s return value is 2.
+If the <code>nocasematch</code> shell option
+(see the description of <code>shopt</code> in <a href="#The-Shopt-Builtin">The Shopt Builtin</a>)
+is enabled, the match is performed without regard to the case
+of alphabetic characters.
+Any part of the pattern may be quoted to force the quoted portion
+to be matched as a string.
+Bracket expressions in regular expressions must be treated carefully,
+since normal quoting characters lose their meanings between brackets.
+If the pattern is stored in a shell variable, quoting the variable
+expansion forces the entire pattern to be matched as a string.
+</p>
+<p>The pattern will match if it matches any part of the string.
+Anchor the pattern using the &lsquo;<samp>^</samp>&rsquo; and &lsquo;<samp>$</samp>&rsquo; regular expression
+operators to force it to match the entire string.
+The array variable <code>BASH_REMATCH</code> records which parts of the string
+matched the pattern.
+The element of <code>BASH_REMATCH</code> with index 0 contains the portion of
+the string matching the entire regular expression.
+Substrings matched by parenthesized subexpressions within the regular
+expression are saved in the remaining <code>BASH_REMATCH</code> indices.
+The element of <code>BASH_REMATCH</code> with index <var>n</var> is the portion of the
+string matching the <var>n</var>th parenthesized subexpression.
+</p>
+<p>For example, the following will match a line
+(stored in the shell variable <var>line</var>)
+if there is a sequence of characters anywhere in the value consisting of
+any number, including zero, of 
+characters in the <code>space</code> character class,
+zero or one instances of &lsquo;<samp>a</samp>&rsquo;, then a &lsquo;<samp>b</samp>&rsquo;:
+</p><div class="example">
+<pre class="example">[[ $line =~ [[:space:]]*(a)?b ]]
+</pre></div>
+
+<p>That means values like &lsquo;<samp>aab</samp>&rsquo; and &lsquo;<samp>  aaaaaab</samp>&rsquo; will match, as
+will a line containing a &lsquo;<samp>b</samp>&rsquo; anywhere in its value.
+</p>
+<p>Storing the regular expression in a shell variable is often a useful
+way to avoid problems with quoting characters that are special to the
+shell.
+It is sometimes difficult to specify a regular expression literally
+without using quotes, or to keep track of the quoting used by regular
+expressions while paying attention to the shell&rsquo;s quote removal.
+Using a shell variable to store the pattern decreases these problems.
+For example, the following is equivalent to the above:
+</p><div class="example">
+<pre class="example">pattern='[[:space:]]*(a)?b'
+[[ $line =~ $pattern ]]
+</pre></div>
+
+<p>If you want to match a character that&rsquo;s special to the regular expression
+grammar, it has to be quoted to remove its special meaning.
+This means that in the pattern &lsquo;<samp>xxx.txt</samp>&rsquo;, the &lsquo;<samp>.</samp>&rsquo; matches any
+character in the string (its usual regular expression meaning), but in the
+pattern &lsquo;<samp>&quot;xxx.txt&quot;</samp>&rsquo; it can only match a literal &lsquo;<samp>.</samp>&rsquo;.
+Shell programmers should take special care with backslashes, since backslashes
+are used both by the shell and regular expressions to remove the special
+meaning from the following character.
+The following two sets of commands are <em>not</em> equivalent:
+</p><div class="example">
+<pre class="example">pattern='\.'
+
+[[ . =~ $pattern ]]
+[[ . =~ \. ]]
+
+[[ . =~ &quot;$pattern&quot; ]]
+[[ . =~ '\.' ]]
+</pre></div>
+
+<p>The first two matches will succeed, but the second two will not, because
+in the second two the backslash will be part of the pattern to be matched.
+In the first two examples, the backslash removes the special meaning from
+&lsquo;<samp>.</samp>&rsquo;, so the literal &lsquo;<samp>.</samp>&rsquo; matches.
+If the string in the first examples were anything other than &lsquo;<samp>.</samp>&rsquo;, say
+&lsquo;<samp>a</samp>&rsquo;, the pattern would not match, because the quoted &lsquo;<samp>.</samp>&rsquo; in the
+pattern loses its special meaning of matching any single character.
+</p>
+<p>Expressions may be combined using the following operators, listed
+in decreasing order of precedence:
+</p>
+<dl compact="compact">
+<dt><code>( <var>expression</var> )</code></dt>
+<dd><p>Returns the value of <var>expression</var>.
+This may be used to override the normal precedence of operators.
+</p>
+</dd>
+<dt><code>! <var>expression</var></code></dt>
+<dd><p>True if <var>expression</var> is false.
+</p>
+</dd>
+<dt><code><var>expression1</var> &amp;&amp; <var>expression2</var></code></dt>
+<dd><p>True if both <var>expression1</var> and <var>expression2</var> are true.
+</p>
+</dd>
+<dt><code><var>expression1</var> || <var>expression2</var></code></dt>
+<dd><p>True if either <var>expression1</var> or <var>expression2</var> is true.
+</p></dd>
+</dl>
+
+<p>The <code>&amp;&amp;</code> and <code>||</code> operators do not evaluate <var>expression2</var> if the
+value of <var>expression1</var> is sufficient to determine the return
+value of the entire conditional expression.
+</p></dd>
+</dl>
+
+<hr>
+<span id="Command-Grouping"></span><div class="header">
+<p>
+Previous: <a href="#Conditional-Constructs" accesskey="p" rel="prev">Conditional Constructs</a>, Up: <a href="#Compound-Commands" accesskey="u" rel="up">Compound Commands</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Grouping-Commands"></span><h4 class="subsubsection">3.2.5.3 Grouping Commands</h4>
+<span id="index-commands_002c-grouping"></span>
+
+<p>Bash provides two ways to group a list of commands to be executed
+as a unit.  When commands are grouped, redirections may be applied
+to the entire command list.  For example, the output of all the
+commands in the list may be redirected to a single stream.
+</p>
+<dl compact="compact">
+<dt><code>()</code></dt>
+<dd><div class="example">
+<pre class="example">( <var>list</var> )
+</pre></div>
+
+<p>Placing a list of commands between parentheses causes a subshell
+environment to be created (see <a href="#Command-Execution-Environment">Command Execution Environment</a>), and each
+of the commands in <var>list</var> to be executed in that subshell.  Since the
+<var>list</var> is executed in a subshell, variable assignments do not remain in
+effect after the subshell completes. 
+</p>
+</dd>
+<dt><code>{}</code></dt>
+<dd><span id="index-_007b"></span>
+<span id="index-_007d"></span>
+<div class="example">
+<pre class="example">{ <var>list</var>; }
+</pre></div>
+
+<p>Placing a list of commands between curly braces causes the list to
+be executed in the current shell context.  No subshell is created.
+The semicolon (or newline) following <var>list</var> is required.
+</p></dd>
+</dl>
+
+<p>In addition to the creation of a subshell, there is a subtle difference
+between these two constructs due to historical reasons.  The braces
+are <code>reserved words</code>, so they must be separated from the <var>list</var>
+by <code>blank</code>s or other shell metacharacters.
+The parentheses are <code>operators</code>, and are
+recognized as separate tokens by the shell even if they are not separated
+from the <var>list</var> by whitespace.
+</p>
+<p>The exit status of both of these constructs is the exit status of
+<var>list</var>.
+</p>
+<hr>
+<span id="Coprocesses"></span><div class="header">
+<p>
+Next: <a href="#GNU-Parallel" accesskey="n" rel="next">GNU Parallel</a>, Previous: <a href="#Compound-Commands" accesskey="p" rel="prev">Compound Commands</a>, Up: <a href="#Shell-Commands" accesskey="u" rel="up">Shell Commands</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Coprocesses-1"></span><h4 class="subsection">3.2.6 Coprocesses</h4>
+<span id="index-coprocess"></span>
+
+<p>A <code>coprocess</code> is a shell command preceded by the <code>coproc</code>
+reserved word.
+A coprocess is executed asynchronously in a subshell, as if the command
+had been terminated with the &lsquo;<samp>&amp;</samp>&rsquo; control operator, with a two-way pipe
+established between the executing shell and the coprocess.
+</p>
+<p>The format for a coprocess is:
+</p><div class="example">
+<pre class="example">coproc [<var>NAME</var>] <var>command</var> [<var>redirections</var>]
+</pre></div>
+
+<p>This creates a coprocess named <var>NAME</var>.
+If <var>NAME</var> is not supplied, the default name is <var>COPROC</var>.
+<var>NAME</var> must not be supplied if <var>command</var> is a simple
+command (see <a href="#Simple-Commands">Simple Commands</a>); otherwise, it is interpreted as
+the first word of the simple command.
+</p>
+<p>When the coprocess is executed, the shell creates an array variable
+(see <a href="#Arrays">Arrays</a>)
+named <code>NAME</code> in the context of the executing shell.
+The standard output of <var>command</var>
+is connected via a pipe to a file descriptor in the executing shell,
+and that file descriptor is assigned to <code>NAME</code>[0].
+The standard input of <var>command</var>
+is connected via a pipe to a file descriptor in the executing shell,
+and that file descriptor is assigned to <code>NAME</code>[1].
+This pipe is established before any redirections specified by the
+command (see <a href="#Redirections">Redirections</a>).
+The file descriptors can be utilized as arguments to shell commands
+and redirections using standard word expansions.
+Other than those created to execute command and process substitutions,
+the file descriptors are not available in subshells.
+</p>
+<p>The process ID of the shell spawned to execute the coprocess is
+available as the value of the variable <code>NAME</code>_PID.
+The <code>wait</code>
+builtin command may be used to wait for the coprocess to terminate.
+</p>
+<p>Since the coprocess is created as an asynchronous command,
+the <code>coproc</code> command always returns success.
+The return status of a coprocess is the exit status of <var>command</var>.
+</p>
+<hr>
+<span id="GNU-Parallel"></span><div class="header">
+<p>
+Previous: <a href="#Coprocesses" accesskey="p" rel="prev">Coprocesses</a>, Up: <a href="#Shell-Commands" accesskey="u" rel="up">Shell Commands</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="GNU-Parallel-1"></span><h4 class="subsection">3.2.7 GNU Parallel</h4>
+
+<p>There are ways to run commands in parallel that are not built into Bash.
+GNU Parallel is a tool to do just that.
+</p>
+<p>GNU Parallel, as its name suggests, can be used to build and run commands
+in parallel.  You may run the same command with different arguments, whether
+they are filenames, usernames, hostnames, or lines read from files.  GNU
+Parallel provides shorthand references to many of the most common operations
+(input lines, various portions of the input line, different ways to specify
+the input source, and so on).  Parallel can replace <code>xargs</code> or feed
+commands from its input sources to several different instances of Bash.
+</p>
+<p>For a complete description, refer to the GNU Parallel documentation.  A few
+examples should provide a brief introduction to its use.
+</p>
+<p>For example, it is easy to replace <code>xargs</code> to gzip all html files in the
+current directory and its subdirectories:
+</p><div class="example">
+<pre class="example">find . -type f -name '*.html' -print | parallel gzip
+</pre></div>
+<p>If you need to protect special characters such as newlines in file names,
+use find&rsquo;s <samp>-print0</samp> option and parallel&rsquo;s <samp>-0</samp> option.
+</p>
+<p>You can use Parallel to move files from the current directory when the
+number of files is too large to process with one <code>mv</code> invocation:
+</p><div class="example">
+<pre class="example">printf '%s\n' * | parallel mv {} destdir
+</pre></div>
+
+<p>As you can see, the {} is replaced with each line read from standard input.
+While using <code>ls</code> will work in most instances, it is not sufficient to
+deal with all filenames. <code>printf</code> is a shell builtin, and therefore is
+not subject to the kernel&rsquo;s limit on the number of arguments to a program,
+so you can use &lsquo;<samp>*</samp>&rsquo; (but see below about the <code>dotglob</code> shell option).
+If you need to accommodate special characters in filenames, you can use
+</p>
+<div class="example">
+<pre class="example">printf '%s\0' * | parallel -0 mv {} destdir
+</pre></div>
+
+<p>as alluded to above.
+</p>
+<p>This will run as many <code>mv</code> commands as there are files in the current
+directory.
+You can emulate a parallel <code>xargs</code> by adding the <samp>-X</samp> option:
+</p><div class="example">
+<pre class="example">printf '%s\0' * | parallel -0 -X mv {} destdir
+</pre></div>
+
+<p>(You may have to modify the pattern if you have the <code>dotglob</code> option
+enabled.)
+</p>
+<p>GNU Parallel can replace certain common idioms that operate on lines read
+from a file (in this case, filenames listed one per line):
+</p><div class="example">
+<pre class="example">	while IFS= read -r x; do
+		do-something1 &quot;$x&quot; &quot;config-$x&quot;
+		do-something2 &lt; &quot;$x&quot;
+	done &lt; file | process-output
+</pre></div>
+
+<p>with a more compact syntax reminiscent of lambdas:
+</p><div class="example">
+<pre class="example">cat list | parallel &quot;do-something1 {} config-{} ; do-something2 &lt; {}&quot; |
+           process-output
+</pre></div>
+
+<p>Parallel provides a built-in mechanism to remove filename extensions, which
+lends itself to batch file transformations or renaming:
+</p><div class="example">
+<pre class="example">ls *.gz | parallel -j+0 &quot;zcat {} | bzip2 &gt;{.}.bz2 &amp;&amp; rm {}&quot;
+</pre></div>
+<p>This will recompress all files in the current directory with names ending
+in .gz using bzip2, running one job per CPU (-j+0) in parallel.
+(We use <code>ls</code> for brevity here; using <code>find</code> as above is more
+robust in the face of filenames containing unexpected characters.)
+Parallel can take arguments from the command line; the above can also be
+written as
+</p>
+<div class="example">
+<pre class="example">parallel &quot;zcat {} | bzip2 &gt;{.}.bz2 &amp;&amp; rm {}&quot; ::: *.gz
+</pre></div>
+
+<p>If a command generates output, you may want to preserve the input order in
+the output.  For instance, the following command
+</p><div class="example">
+<pre class="example">{
+    echo foss.org.my ;
+    echo debian.org ;
+    echo freenetproject.org ;
+} | parallel traceroute
+</pre></div>
+<p>will display as output the traceroute invocation that finishes first.
+Adding the <samp>-k</samp> option 
+</p><div class="example">
+<pre class="example">{
+    echo foss.org.my ;
+    echo debian.org ;
+    echo freenetproject.org ;
+} | parallel -k traceroute
+</pre></div>
+<p>will ensure that the output of <code>traceroute foss.org.my</code> is displayed first.
+</p>
+<p>Finally, Parallel can be used to run a sequence of shell commands in parallel,
+similar to &lsquo;<samp>cat file | bash</samp>&rsquo;.
+It is not uncommon to take a list of filenames, create a series of shell
+commands to operate on them, and feed that list of commands to a shell.
+Parallel can speed this up.  Assuming that <samp>file</samp> contains a list of
+shell commands, one per line,
+</p>
+<div class="example">
+<pre class="example">parallel -j 10 &lt; file
+</pre></div>
+
+<p>will evaluate the commands using the shell (since no explicit command is
+supplied as an argument), in blocks of ten shell jobs at a time.
+</p>
+<hr>
+<span id="Shell-Functions"></span><div class="header">
+<p>
+Next: <a href="#Shell-Parameters" accesskey="n" rel="next">Shell Parameters</a>, Previous: <a href="#Shell-Commands" accesskey="p" rel="prev">Shell Commands</a>, Up: <a href="#Basic-Shell-Features" accesskey="u" rel="up">Basic Shell Features</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Shell-Functions-1"></span><h3 class="section">3.3 Shell Functions</h3>
+<span id="index-shell-function"></span>
+<span id="index-functions_002c-shell"></span>
+
+<p>Shell functions are a way to group commands for later execution
+using a single name for the group.  They are executed just like
+a &quot;regular&quot; command.
+When the name of a shell function is used as a simple command name,
+the list of commands associated with that function name is executed.
+Shell functions are executed in the current
+shell context; no new process is created to interpret them.
+</p>
+<p>Functions are declared using this syntax:
+<span id="index-function"></span>
+</p><div class="example">
+<pre class="example"><var>fname</var> () <var>compound-command</var> [ <var>redirections</var> ]
+</pre></div>
+
+<p>or
+</p>
+<div class="example">
+<pre class="example">function <var>fname</var> [()] <var>compound-command</var> [ <var>redirections</var> ]
+</pre></div>
+
+<p>This defines a shell function named <var>fname</var>.  The reserved
+word <code>function</code> is optional.
+If the <code>function</code> reserved
+word is supplied, the parentheses are optional.
+The <var>body</var> of the function is the compound command
+<var>compound-command</var> (see <a href="#Compound-Commands">Compound Commands</a>).
+That command is usually a <var>list</var> enclosed between { and }, but
+may be any compound command listed above,
+with one exception: If the <code>function</code> reserved word is used, but the
+parentheses are not supplied, the braces are required.                   
+<var>compound-command</var> is executed whenever <var>fname</var> is specified as the
+name of a command.
+When the shell is in <small>POSIX</small> mode (see <a href="#Bash-POSIX-Mode">Bash POSIX Mode</a>),
+<var>fname</var> must be a valid shell <var>name</var> and
+may not be the same as one of the special builtins
+(see <a href="#Special-Builtins">Special Builtins</a>).
+In default mode, a function name can be any unquoted shell word that does
+not contain &lsquo;<samp>$</samp>&rsquo;.
+Any redirections (see <a href="#Redirections">Redirections</a>) associated with the shell function
+are performed when the function is executed.
+A function definition may be deleted using the <samp>-f</samp> option to the
+<code>unset</code> builtin (see <a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a>).
+</p>
+<p>The exit status of a function definition is zero unless a syntax error
+occurs or a readonly function with the same name already exists.
+When executed, the exit status of a function is the exit status of the
+last command executed in the body.
+</p>
+<p>Note that for historical reasons, in the most common usage the curly braces
+that surround the body of the function must be separated from the body by
+<code>blank</code>s or newlines.
+This is because the braces are reserved words and are only recognized
+as such when they are separated from the command list
+by whitespace or another shell metacharacter.
+Also, when using the braces, the <var>list</var> must be terminated by a semicolon,
+a &lsquo;<samp>&amp;</samp>&rsquo;, or a newline.
+</p>
+<p>When a function is executed, the arguments to the
+function become the positional parameters
+during its execution (see <a href="#Positional-Parameters">Positional Parameters</a>).
+The special parameter &lsquo;<samp>#</samp>&rsquo; that expands to the number of
+positional parameters is updated to reflect the change.
+Special parameter <code>0</code> is unchanged.
+The first element of the <code>FUNCNAME</code> variable is set to the
+name of the function while the function is executing.
+</p>
+<p>All other aspects of the shell execution
+environment are identical between a function and its caller
+with these exceptions:
+the <code>DEBUG</code> and <code>RETURN</code> traps
+are not inherited unless the function has been given the
+<code>trace</code> attribute using the <code>declare</code> builtin or
+the <code>-o functrace</code> option has been enabled with
+the <code>set</code> builtin,
+(in which case all functions inherit the <code>DEBUG</code> and <code>RETURN</code> traps),
+and the <code>ERR</code> trap is not inherited unless the <code>-o errtrace</code>
+shell option has been enabled.
+See <a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a>, for the description of the
+<code>trap</code> builtin.
+</p>
+<p>The <code>FUNCNEST</code> variable, if set to a numeric value greater
+than 0, defines a maximum function nesting level.  Function
+invocations that exceed the limit cause the entire command to
+abort.
+</p>
+<p>If the builtin command <code>return</code>
+is executed in a function, the function completes and
+execution resumes with the next command after the function
+call.
+Any command associated with the <code>RETURN</code> trap is executed
+before execution resumes.
+When a function completes, the values of the
+positional parameters and the special parameter &lsquo;<samp>#</samp>&rsquo;
+are restored to the values they had prior to the function&rsquo;s
+execution.  If a numeric argument is given to <code>return</code>,
+that is the function&rsquo;s return status; otherwise the function&rsquo;s
+return status is the exit status of the last command executed
+before the <code>return</code>.
+</p>
+<p>Variables local to the function may be declared with the
+<code>local</code> builtin.  These variables are visible only to
+the function and the commands it invokes.  This is particularly
+important when a shell function calls other functions.
+</p>
+<p>Local variables &quot;shadow&quot; variables with the same name declared at
+previous scopes.  For instance, a local variable declared in a function
+hides a global variable of the same name: references and assignments
+refer to the local variable, leaving the global variable unmodified.
+When the function returns, the global variable is once again visible.
+</p>
+<p>The shell uses <var>dynamic scoping</var> to control a variable&rsquo;s visibility
+within functions.
+With dynamic scoping, visible variables and their values
+are a result of the sequence of function calls that caused execution
+to reach the current function.
+The value of a variable that a function sees depends
+on its value within its caller, if any, whether that caller is
+the &quot;global&quot; scope or another shell function.
+This is also the value that a local variable
+declaration &quot;shadows&quot;, and the value that is restored when the function
+returns.
+</p>
+<p>For example, if a variable <var>var</var> is declared as local in function
+<var>func1</var>, and <var>func1</var> calls another function <var>func2</var>,
+references to <var>var</var> made from within <var>func2</var> will resolve to the
+local variable <var>var</var> from <var>func1</var>, shadowing any global variable
+named <var>var</var>.
+</p>
+<p>The following script demonstrates this behavior.
+When executed, the script displays
+</p>
+<div class="example">
+<pre class="example">In func2, var = func1 local
+</pre></div>
+
+<div class="example">
+<pre class="example">func1()
+{
+    local var='func1 local'
+    func2
+}
+
+func2()
+{
+    echo &quot;In func2, var = $var&quot;
+}
+
+var=global
+func1
+</pre></div>
+
+<p>The <code>unset</code> builtin also acts using the same dynamic scope: if a  
+variable is local to the current scope, <code>unset</code> will unset it;         
+otherwise the unset will refer to the variable found in any calling scope 
+as described above.
+If a variable at the current local scope is unset, it will remain so
+until it is reset in that scope or until the function returns.
+Once the function returns, any instance of the variable at a previous
+scope will become visible.
+If the unset acts on a variable at a previous scope, any instance of a   
+variable with that name that had been shadowed will become visible.
+</p>
+<p>Function names and definitions may be listed with the
+<samp>-f</samp> option to the <code>declare</code> (<code>typeset</code>)
+builtin command (see <a href="#Bash-Builtins">Bash Builtins</a>).
+The <samp>-F</samp> option to <code>declare</code> or <code>typeset</code>
+will list the function names only
+(and optionally the source file and line number, if the <code>extdebug</code>
+shell option is enabled).
+Functions may be exported so that subshells
+automatically have them defined with the
+<samp>-f</samp> option to the <code>export</code> builtin
+(see <a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a>).
+</p>
+<p>Functions may be recursive.
+The <code>FUNCNEST</code> variable may be used to limit the depth of the
+function call stack and restrict the number of function invocations.
+By default, no limit is placed on the number of recursive  calls.
+</p>
+<hr>
+<span id="Shell-Parameters"></span><div class="header">
+<p>
+Next: <a href="#Shell-Expansions" accesskey="n" rel="next">Shell Expansions</a>, Previous: <a href="#Shell-Functions" accesskey="p" rel="prev">Shell Functions</a>, Up: <a href="#Basic-Shell-Features" accesskey="u" rel="up">Basic Shell Features</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Shell-Parameters-1"></span><h3 class="section">3.4 Shell Parameters</h3>
+<span id="index-parameters"></span>
+<span id="index-variable_002c-shell"></span>
+<span id="index-shell-variable"></span>
+
+<table class="menu" border="0" cellspacing="0">
+<tr><td align="left" valign="top">&bull; <a href="#Positional-Parameters" accesskey="1">Positional Parameters</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">The shell&rsquo;s command-line arguments.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Special-Parameters" accesskey="2">Special Parameters</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Parameters denoted by special characters.
+</td></tr>
+</table>
+
+<p>A <var>parameter</var> is an entity that stores values.
+It can be a <code>name</code>, a number, or one of the special characters
+listed below.
+A <var>variable</var> is a parameter denoted by a <code>name</code>.
+A variable has a <var>value</var> and zero or more <var>attributes</var>.
+Attributes are assigned using the <code>declare</code> builtin command
+(see the description of the <code>declare</code> builtin in <a href="#Bash-Builtins">Bash Builtins</a>).
+</p>
+<p>A parameter is set if it has been assigned a value.  The null string is
+a valid value.  Once a variable is set, it may be unset only by using
+the <code>unset</code> builtin command.
+</p>
+<p>A variable may be assigned to by a statement of the form
+</p><div class="example">
+<pre class="example"><var>name</var>=[<var>value</var>]
+</pre></div>
+<p>If <var>value</var>
+is not given, the variable is assigned the null string.  All
+<var>value</var>s undergo tilde expansion, parameter and variable expansion,
+command substitution, arithmetic expansion, and quote
+removal (detailed below).  If the variable has its <code>integer</code>
+attribute set, then <var>value</var> 
+is evaluated as an arithmetic expression even if the <code>$((&hellip;))</code>
+expansion is not used (see <a href="#Arithmetic-Expansion">Arithmetic Expansion</a>).
+Word splitting is not performed, with the exception
+of <code>&quot;$@&quot;</code> as explained below.
+Filename expansion is not performed.
+Assignment statements may also appear as arguments to the
+<code>alias</code>, 
+<code>declare</code>, <code>typeset</code>, <code>export</code>, <code>readonly</code>,
+and <code>local</code> builtin commands (<var>declaration</var> commands).
+When in <small>POSIX</small> mode (see <a href="#Bash-POSIX-Mode">Bash POSIX Mode</a>), these builtins may appear
+in a command after one or more instances of the <code>command</code> builtin
+and retain these assignment statement properties.
+</p>
+<p>In the context where an assignment statement is assigning a value  
+to a shell variable or array index (see <a href="#Arrays">Arrays</a>), the &lsquo;<samp>+=</samp>&rsquo;
+operator can be used to   
+append to or add to the variable&rsquo;s previous value.
+This includes arguments to builtin commands such as <code>declare</code> that
+accept assignment statements (<var>declaration</var> commands).
+When &lsquo;<samp>+=</samp>&rsquo; is applied to a variable for which the <var>integer</var> attribute
+has been set, <var>value</var> is evaluated as an arithmetic expression and
+added to the variable&rsquo;s current value, which is also evaluated.
+When &lsquo;<samp>+=</samp>&rsquo; is applied to an array variable using compound assignment
+(see <a href="#Arrays">Arrays</a>), the
+variable&rsquo;s value is not unset (as it is when using &lsquo;<samp>=</samp>&rsquo;), and new
+values are appended to the array beginning at one greater than the array&rsquo;s
+maximum index (for indexed arrays),  or added as additional key-value pairs
+in an associative array.
+When applied to a string-valued variable, <var>value</var> is expanded and
+appended to the variable&rsquo;s value.
+</p>
+<p>A variable can be assigned the <var>nameref</var> attribute using the
+<samp>-n</samp> option to the <code>declare</code> or <code>local</code> builtin commands
+(see <a href="#Bash-Builtins">Bash Builtins</a>)
+to create a <var>nameref</var>, or a reference to another variable.
+This allows variables to be manipulated indirectly.
+Whenever the nameref variable is referenced, assigned to, unset, or has
+its attributes modified (other than using or changing the nameref
+attribute itself), the
+operation is actually performed on the variable specified by the nameref
+variable&rsquo;s value.
+A nameref is commonly used within shell functions to refer to a variable
+whose name is passed as an argument to the function.
+For instance, if a variable name is passed to a shell function as its first
+argument, running
+</p><div class="example">
+<pre class="example">declare -n ref=$1
+</pre></div>
+<p>inside the function creates a nameref variable <var>ref</var> whose value is
+the variable name passed as the first argument.
+References and assignments to <var>ref</var>, and changes to its attributes,
+are treated as references, assignments, and attribute modifications
+to the variable whose name was passed as <code>$1</code>.
+</p>
+<p>If the control variable in a <code>for</code> loop has the nameref attribute,
+the list of words can be a list of shell variables, and a name reference
+will be established for each word in the list, in turn, when the loop is
+executed.
+Array variables cannot be given the nameref attribute.
+However, nameref variables can reference array variables and subscripted
+array variables.
+Namerefs can be unset using the <samp>-n</samp> option to the <code>unset</code> builtin
+(see <a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a>).
+Otherwise, if <code>unset</code> is executed with the name of a nameref variable
+as an argument, the variable referenced by the nameref variable will be unset.
+</p>
+<hr>
+<span id="Positional-Parameters"></span><div class="header">
+<p>
+Next: <a href="#Special-Parameters" accesskey="n" rel="next">Special Parameters</a>, Up: <a href="#Shell-Parameters" accesskey="u" rel="up">Shell Parameters</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Positional-Parameters-1"></span><h4 class="subsection">3.4.1 Positional Parameters</h4>
+<span id="index-parameters_002c-positional"></span>
+
+<p>A <var>positional parameter</var> is a parameter denoted by one or more
+digits, other than the single digit <code>0</code>.  Positional parameters are
+assigned from the shell&rsquo;s arguments when it is invoked,
+and may be reassigned using the <code>set</code> builtin command.
+Positional parameter <code>N</code> may be referenced as <code>${N}</code>, or
+as <code>$N</code> when <code>N</code> consists of a single digit.
+Positional parameters may not be assigned to with assignment statements.
+The <code>set</code> and <code>shift</code> builtins are used to set and
+unset them (see <a href="#Shell-Builtin-Commands">Shell Builtin Commands</a>).
+The positional parameters are
+temporarily replaced when a shell function is executed
+(see <a href="#Shell-Functions">Shell Functions</a>).
+</p>
+<p>When a positional parameter consisting of more than a single
+digit is expanded, it must be enclosed in braces.
+</p>
+<hr>
+<span id="Special-Parameters"></span><div class="header">
+<p>
+Previous: <a href="#Positional-Parameters" accesskey="p" rel="prev">Positional Parameters</a>, Up: <a href="#Shell-Parameters" accesskey="u" rel="up">Shell Parameters</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Special-Parameters-1"></span><h4 class="subsection">3.4.2 Special Parameters</h4>
+<span id="index-parameters_002c-special"></span>
+
+<p>The shell treats several parameters specially.  These parameters may
+only be referenced; assignment to them is not allowed.
+</p>
+<dl compact="compact">
+<dt><code>*</code>
+<span id="index-_002a"></span>
+</dt>
+<dd><span id="index-_0024_002a"></span>
+<p>($*) Expands to the positional parameters, starting from one.
+When the expansion is not within double quotes, each positional parameter
+expands to a separate word.
+In contexts where it is performed, those words
+are subject to further word splitting and filename expansion.
+When the expansion occurs within double quotes, it expands to a single word
+with the value of each parameter separated by the first character of the
+<code>IFS</code> special variable.  That is, <code>&quot;$*&quot;</code> is equivalent
+to <code>&quot;$1<var>c</var>$2<var>c</var>&hellip;&quot;</code>, where <var>c</var>
+is the first character of the value of the <code>IFS</code>
+variable.
+If <code>IFS</code> is unset, the parameters are separated by spaces.
+If <code>IFS</code> is null, the parameters are joined without intervening
+separators.
+</p>
+</dd>
+<dt><code>@</code>
+<span id="index-_0040"></span>
+</dt>
+<dd><span id="index-_0024_0040"></span>
+<p>($@) Expands to the positional parameters, starting from one.
+In contexts where word splitting is performed, this expands each
+positional parameter to a separate word; if not within double
+quotes, these words are subject to word splitting.
+In contexts where word splitting is not performed,
+this expands to a single word
+with each positional parameter separated by a space.
+When the
+expansion occurs within double quotes, and word splitting is performed,
+each parameter expands to a
+separate word.  That is, <code>&quot;$@&quot;</code> is equivalent to
+<code>&quot;$1&quot; &quot;$2&quot; &hellip;</code>.
+If the double-quoted expansion occurs within a word, the expansion of
+the first parameter is joined with the beginning part of the original
+word, and the expansion of the last parameter is joined with the last
+part of the original word.
+When there are no positional parameters, <code>&quot;$@&quot;</code> and
+<code>$@</code>
+expand to nothing (i.e., they are removed).
+</p>
+</dd>
+<dt><code>#</code>
+<span id="index-_0023"></span>
+</dt>
+<dd><span id="index-_0024_0023"></span>
+<p>($#) Expands to the number of positional parameters in decimal.
+</p>
+</dd>
+<dt><code>?</code>
+<span id="index-_003f"></span>
+</dt>
+<dd><span id="index-_0024_003f"></span>
+<p>($?) Expands to the exit status of the most recently executed foreground
+pipeline.
+</p>
+</dd>
+<dt><code>-</code>
+<span id="index-_002d"></span>
+</dt>
+<dd><span id="index-_0024_002d"></span>
+<p>($-, a hyphen.)  Expands to the current option flags as specified upon
+invocation, by the <code>set</code>
+builtin command, or those set by the shell itself
+(such as the <samp>-i</samp> option).
+</p>
+</dd>
+<dt><code>$</code>
+<span id="index-_0024"></span>
+</dt>
+<dd><span id="index-_0024_0024"></span>
+<p>($$) Expands to the process <small>ID</small> of the shell.  In a <code>()</code> subshell, it
+expands to the process <small>ID</small> of the invoking shell, not the subshell.
+</p>
+</dd>
+<dt><code>!</code>
+<span id="index-_0021-1"></span>
+</dt>
+<dd><span id="index-_0024_0021"></span>
+<p>($!) Expands to the process <small>ID</small> of the job most recently placed into the
+background, whether executed as an asynchronous command or using
+the <code>bg</code> builtin (see <a href="#Job-Control-Builtins">Job Control Builtins</a>).
+</p>
+</dd>
+<dt><code>0</code>
+<span id="index-0"></span>
+</dt>
+<dd><span id="index-_00240"></span>
+<p>($0) Expands to the name of the shell or shell script.  This is set at
+shell initialization.  If Bash is invoked with a file of commands
+(see <a href="#Shell-Scripts">Shell Scripts</a>), <code>$0</code> is set to the name of that file.
+If Bash is started with the <samp>-c</samp> option (see <a href="#Invoking-Bash">Invoking Bash</a>),
+then <code>$0</code> is set to the first argument after the string to be
+executed, if one is present.  Otherwise, it is set
+to the filename used to invoke Bash, as given by argument zero.
+</p></dd>
+</dl>
+
+<hr>
+<span id="Shell-Expansions"></span><div class="header">
+<p>
+Next: <a href="#Redirections" accesskey="n" rel="next">Redirections</a>, Previous: <a href="#Shell-Parameters" accesskey="p" rel="prev">Shell Parameters</a>, Up: <a href="#Basic-Shell-Features" accesskey="u" rel="up">Basic Shell Features</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Shell-Expansions-1"></span><h3 class="section">3.5 Shell Expansions</h3>
+<span id="index-expansion"></span>
+
+<p>Expansion is performed on the command line after it has been split into
+<code>token</code>s.  There are seven kinds of expansion performed:
+</p>
+<ul>
+<li> brace expansion
+</li><li> tilde expansion
+</li><li> parameter and variable expansion
+</li><li> command substitution
+</li><li> arithmetic expansion
+</li><li> word splitting
+</li><li> filename expansion
+</li></ul>
+
+<table class="menu" border="0" cellspacing="0">
+<tr><td align="left" valign="top">&bull; <a href="#Brace-Expansion" accesskey="1">Brace Expansion</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Expansion of expressions within braces.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Tilde-Expansion" accesskey="2">Tilde Expansion</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Expansion of the ~ character.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Shell-Parameter-Expansion" accesskey="3">Shell Parameter Expansion</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How Bash expands variables to their values.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Command-Substitution" accesskey="4">Command Substitution</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Using the output of a command as an argument.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Arithmetic-Expansion" accesskey="5">Arithmetic Expansion</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How to use arithmetic in shell expansions.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Process-Substitution" accesskey="6">Process Substitution</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">A way to write and read to and from a
+				command.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Word-Splitting" accesskey="7">Word Splitting</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How the results of expansion are split into separate
+			arguments.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Filename-Expansion" accesskey="8">Filename Expansion</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">A shorthand for specifying filenames matching patterns.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Quote-Removal" accesskey="9">Quote Removal</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How and when quote characters are removed from
+			words.
+</td></tr>
+</table>
+
+<p>The order of expansions is:
+brace expansion;
+tilde expansion, parameter and variable expansion, arithmetic expansion,
+and command substitution (done in a left-to-right fashion);
+word splitting;
+and filename expansion.
+</p>
+<p>On systems that can support it, there is an additional expansion
+available: <var>process substitution</var>.
+This is performed at the
+same time as tilde, parameter, variable, and arithmetic expansion and
+command substitution.
+</p>
+<p>After these expansions are performed, quote characters present in the
+original word are removed unless they have been quoted themselves
+(<var>quote removal</var>).
+</p>
+<p>Only brace expansion, word splitting, and filename expansion
+can increase the number of words of the expansion; other expansions
+expand a single word to a single word.
+The only exceptions to this are the expansions of
+<code>&quot;$@&quot;</code> and <code>$*</code> (see <a href="#Special-Parameters">Special Parameters</a>), and
+<code>&quot;${<var>name</var>[@]}&quot;</code> and <code>${<var>name</var>[*]}</code>
+(see <a href="#Arrays">Arrays</a>).
+</p>
+<p>After all expansions, <code>quote removal</code> (see <a href="#Quote-Removal">Quote Removal</a>)
+is performed.
+</p>
+<hr>
+<span id="Brace-Expansion"></span><div class="header">
+<p>
+Next: <a href="#Tilde-Expansion" accesskey="n" rel="next">Tilde Expansion</a>, Up: <a href="#Shell-Expansions" accesskey="u" rel="up">Shell Expansions</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Brace-Expansion-1"></span><h4 class="subsection">3.5.1 Brace Expansion</h4>
+<span id="index-brace-expansion"></span>
+<span id="index-expansion_002c-brace"></span>
+
+<p>Brace expansion is a mechanism by which arbitrary strings may be generated.
+This mechanism is similar to
+<var>filename expansion</var> (see <a href="#Filename-Expansion">Filename Expansion</a>),
+but the filenames generated need not exist.
+Patterns to be brace expanded take the form of an optional <var>preamble</var>,
+followed by either a series of comma-separated strings or a sequence expression
+between a pair of braces,
+followed by an optional <var>postscript</var>.
+The preamble is prefixed to each string contained within the braces, and
+the postscript is then appended to each resulting string, expanding left
+to right.
+</p>
+<p>Brace expansions may be nested.
+The results of each expanded string are not sorted; left to right order
+is preserved.
+For example,
+</p><div class="example">
+<pre class="example">bash$ echo a{d,c,b}e
+ade ace abe
+</pre></div>
+
+<p>A sequence expression takes the form <code>{<var>x</var>..<var>y</var>[..<var>incr</var>]}</code>,
+where <var>x</var> and <var>y</var> are either integers or single characters,
+and <var>incr</var>, an optional increment, is an integer.
+When integers are supplied, the expression expands to each number between
+<var>x</var> and <var>y</var>, inclusive.
+Supplied integers may be prefixed with &lsquo;<samp>0</samp>&rsquo; to force each term to have the
+same width.
+When either <var>x</var> or <var>y</var> begins with a zero, the shell
+attempts to force all generated terms to contain the same number of digits,
+zero-padding where necessary.
+When characters are supplied, the expression expands to each character
+lexicographically between <var>x</var> and <var>y</var>, inclusive,
+using the default C locale.
+Note that both <var>x</var> and <var>y</var> must be of the same type.
+When the increment is supplied, it is used as the difference between
+each term.  The default increment is 1 or -1 as appropriate.
+</p>
+<p>Brace expansion is performed before any other expansions,
+and any characters special to other expansions are preserved
+in the result.  It is strictly textual.  Bash
+does not apply any syntactic interpretation to the context of the
+expansion or the text between the braces.
+</p>
+<p>A correctly-formed brace expansion must contain unquoted opening
+and closing braces, and at least one unquoted comma or a valid
+sequence expression.
+Any incorrectly formed brace expansion is left unchanged.
+</p>
+<p>A { or &lsquo;<samp>,</samp>&rsquo; may be quoted with a backslash to prevent its
+being considered part of a brace expression.
+To avoid conflicts with parameter expansion, the string &lsquo;<samp>${</samp>&rsquo;
+is not considered eligible for brace expansion,
+and inhibits brace expansion until the closing &lsquo;<samp>}</samp>&rsquo;.
+</p>
+<p>This construct is typically used as shorthand when the common
+prefix of the strings to be generated is longer than in the
+above example:
+</p><div class="example">
+<pre class="example">mkdir /usr/local/src/bash/{old,new,dist,bugs}
+</pre></div>
+<p>or
+</p><div class="example">
+<pre class="example">chown root /usr/{ucb/{ex,edit},lib/{ex?.?*,how_ex}}
+</pre></div>
+
+<hr>
+<span id="Tilde-Expansion"></span><div class="header">
+<p>
+Next: <a href="#Shell-Parameter-Expansion" accesskey="n" rel="next">Shell Parameter Expansion</a>, Previous: <a href="#Brace-Expansion" accesskey="p" rel="prev">Brace Expansion</a>, Up: <a href="#Shell-Expansions" accesskey="u" rel="up">Shell Expansions</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Tilde-Expansion-1"></span><h4 class="subsection">3.5.2 Tilde Expansion</h4>
+<span id="index-tilde-expansion"></span>
+<span id="index-expansion_002c-tilde"></span>
+
+<p>If a word begins with an unquoted tilde character (&lsquo;<samp>~</samp>&rsquo;), all of the
+characters up to the first unquoted slash (or all characters,
+if there is no unquoted slash) are considered a <var>tilde-prefix</var>.
+If none of the characters in the tilde-prefix are quoted, the
+characters in the tilde-prefix following the tilde are treated as a
+possible <var>login name</var>.
+If this login name is the null string, the tilde is replaced with the
+value of the <code>HOME</code> shell variable.
+If <code>HOME</code> is unset, the home directory of the user executing the
+shell is substituted instead.
+Otherwise, the tilde-prefix is replaced with the home directory
+associated with the specified login name.
+</p>
+<p>If the tilde-prefix is &lsquo;<samp>~+</samp>&rsquo;, the value of
+the shell variable <code>PWD</code> replaces the tilde-prefix.
+If the tilde-prefix is &lsquo;<samp>~-</samp>&rsquo;, the value of the shell variable
+<code>OLDPWD</code>, if it is set, is substituted.
+</p>
+<p>If the characters following the tilde in the tilde-prefix consist of a
+number <var>N</var>, optionally prefixed by a &lsquo;<samp>+</samp>&rsquo; or a &lsquo;<samp>-</samp>&rsquo;,
+the tilde-prefix is replaced with the
+corresponding element from the directory stack, as it would be displayed
+by the <code>dirs</code> builtin invoked with the characters following tilde
+in the tilde-prefix as an argument (see <a href="#The-Directory-Stack">The Directory Stack</a>).
+If the tilde-prefix, sans the tilde, consists of a number without a
+leading &lsquo;<samp>+</samp>&rsquo; or &lsquo;<samp>-</samp>&rsquo;, &lsquo;<samp>+</samp>&rsquo; is assumed.
+</p>
+<p>If the login name is invalid, or the tilde expansion fails, the word is
+left unchanged.
+</p>
+<p>Each variable assignment is checked for unquoted tilde-prefixes immediately
+following a &lsquo;<samp>:</samp>&rsquo; or the first &lsquo;<samp>=</samp>&rsquo;.
+In these cases, tilde expansion is also performed.
+Consequently, one may use filenames with tildes in assignments to
+<code>PATH</code>, <code>MAILPATH</code>, and <code>CDPATH</code>,
+and the shell assigns the expanded value.
+</p>
+<p>The following table shows how Bash treats unquoted tilde-prefixes:
+</p>
+<dl compact="compact">
+<dt><code>~</code></dt>
+<dd><p>The value of <code>$HOME</code>
+</p></dd>
+<dt><code>~/foo</code></dt>
+<dd><p><samp>$HOME/foo</samp>
+</p>
+</dd>
+<dt><code>~fred/foo</code></dt>
+<dd><p>The subdirectory <code>foo</code> of the home directory of the user
+<code>fred</code>
+</p>
+</dd>
+<dt><code>~+/foo</code></dt>
+<dd><p><samp>$PWD/foo</samp>
+</p>
+</dd>
+<dt><code>~-/foo</code></dt>
+<dd><p><samp>${OLDPWD-'~-'}/foo</samp>
+</p>
+</dd>
+<dt><code>~<var>N</var></code></dt>
+<dd><p>The string that would be displayed by &lsquo;<samp>dirs +<var>N</var></samp>&rsquo;
+</p>
+</dd>
+<dt><code>~+<var>N</var></code></dt>
+<dd><p>The string that would be displayed by &lsquo;<samp>dirs +<var>N</var></samp>&rsquo;
+</p>
+</dd>
+<dt><code>~-<var>N</var></code></dt>
+<dd><p>The string that would be displayed by &lsquo;<samp>dirs -<var>N</var></samp>&rsquo;
+</p></dd>
+</dl>
+
+<p>Bash also performs tilde expansion on words satisfying the conditions of
+variable assignments (see <a href="#Shell-Parameters">Shell Parameters</a>)
+when they appear as arguments to simple commands.
+Bash does not do this, except for the <var>declaration</var> commands listed
+above, when in <small>POSIX</small> mode.
+</p>
+<hr>
+<span id="Shell-Parameter-Expansion"></span><div class="header">
+<p>
+Next: <a href="#Command-Substitution" accesskey="n" rel="next">Command Substitution</a>, Previous: <a href="#Tilde-Expansion" accesskey="p" rel="prev">Tilde Expansion</a>, Up: <a href="#Shell-Expansions" accesskey="u" rel="up">Shell Expansions</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Shell-Parameter-Expansion-1"></span><h4 class="subsection">3.5.3 Shell Parameter Expansion</h4>
+<span id="index-parameter-expansion"></span>
+<span id="index-expansion_002c-parameter"></span>
+
+<p>The &lsquo;<samp>$</samp>&rsquo; character introduces parameter expansion,
+command substitution, or arithmetic expansion.  The parameter name
+or symbol to be expanded may be enclosed in braces, which
+are optional but serve to protect the variable to be expanded from
+characters immediately following it which could be
+interpreted as part of the name.
+</p>
+<p>When braces are used, the matching ending brace is the first &lsquo;<samp>}</samp>&rsquo;
+not escaped by a backslash or within a quoted string, and not within an
+embedded arithmetic expansion, command substitution, or parameter
+expansion.
+</p>
+<p>The basic form of parameter expansion is ${<var>parameter</var>}.
+The value of <var>parameter</var> is substituted.
+The <var>parameter</var> is a shell parameter as described above
+(see <a href="#Shell-Parameters">Shell Parameters</a>) or an array reference (see <a href="#Arrays">Arrays</a>).
+The braces are required when <var>parameter</var>
+is a positional parameter with more than one digit,
+or when <var>parameter</var> is followed by a character that is not to be
+interpreted as part of its name.
+</p>
+<p>If the first character of <var>parameter</var> is an exclamation point (!),
+and <var>parameter</var> is not a <var>nameref</var>,
+it introduces a level of indirection.
+Bash uses the value formed by expanding the rest of
+<var>parameter</var> as the new <var>parameter</var>; this is then
+expanded and that value is used in the rest of the expansion, rather
+than the expansion of the original <var>parameter</var>.
+This is known as <code>indirect expansion</code>.
+The value is subject to tilde expansion,
+parameter expansion, command substitution, and arithmetic expansion.
+If <var>parameter</var> is a nameref, this expands to the name of the
+variable referenced by <var>parameter</var> instead of performing the
+complete indirect expansion.
+The exceptions to this are the expansions of ${!<var>prefix</var>*}
+and ${!<var>name</var>[@]}
+described below.
+The exclamation point must immediately follow the left brace in order to
+introduce indirection.
+</p>
+<p>In each of the cases below, <var>word</var> is subject to tilde expansion,
+parameter expansion, command substitution, and arithmetic expansion.
+</p>
+<p>When not performing substring expansion, using the form described
+below (e.g., &lsquo;<samp>:-</samp>&rsquo;), Bash tests for a parameter that is unset or null.
+Omitting the colon results in a test only for a parameter that is unset.
+Put another way, if the colon is included,
+the operator tests for both <var>parameter</var>&rsquo;s existence and that its value
+is not null; if the colon is omitted, the operator tests only for existence.
+</p>
+<dl compact="compact">
+<dt><code>${<var>parameter</var>:-<var>word</var>}</code></dt>
+<dd><p>If <var>parameter</var> is unset or null, the expansion of
+<var>word</var> is substituted.  Otherwise, the value of
+<var>parameter</var> is substituted.
+</p>
+</dd>
+<dt><code>${<var>parameter</var>:=<var>word</var>}</code></dt>
+<dd><p>If <var>parameter</var>
+is unset or null, the expansion of <var>word</var>
+is assigned to <var>parameter</var>.
+The value of <var>parameter</var> is then substituted. 
+Positional parameters and special parameters may not be assigned to
+in this way.
+</p>
+</dd>
+<dt><code>${<var>parameter</var>:?<var>word</var>}</code></dt>
+<dd><p>If <var>parameter</var>
+is null or unset, the expansion of <var>word</var> (or a message
+to that effect if <var>word</var>
+is not present) is written to the standard error and the shell, if it
+is not interactive, exits.  Otherwise, the value of <var>parameter</var> is
+substituted.
+</p>
+</dd>
+<dt><code>${<var>parameter</var>:+<var>word</var>}</code></dt>
+<dd><p>If <var>parameter</var>
+is null or unset, nothing is substituted, otherwise the expansion of
+<var>word</var> is substituted.
+</p>
+</dd>
+<dt><code>${<var>parameter</var>:<var>offset</var>}</code></dt>
+<dt><code>${<var>parameter</var>:<var>offset</var>:<var>length</var>}</code></dt>
+<dd><p>This is referred to as Substring Expansion.
+It expands to up to <var>length</var> characters of the value of <var>parameter</var>
+starting at the character specified by <var>offset</var>.
+If <var>parameter</var> is &lsquo;<samp>@</samp>&rsquo;, an indexed array subscripted by
+&lsquo;<samp>@</samp>&rsquo; or &lsquo;<samp>*</samp>&rsquo;, or an associative array name, the results differ as
+described below.
+If <var>length</var> is omitted, it expands to the substring of the value of
+<var>parameter</var> starting at the character specified by <var>offset</var>
+and extending to the end of the value.
+<var>length</var> and <var>offset</var> are arithmetic expressions
+(see <a href="#Shell-Arithmetic">Shell Arithmetic</a>).
+</p>
+<p>If <var>offset</var> evaluates to a number less than zero, the value
+is used as an offset in characters
+from the end of the value of <var>parameter</var>.
+If <var>length</var> evaluates to a number less than zero,
+it is interpreted as an offset in characters
+from the end of the value of <var>parameter</var> rather than
+a number of characters, and the expansion is the characters between
+<var>offset</var> and that result.
+Note that a negative offset must be separated from the colon by at least
+one space to avoid being confused with the &lsquo;<samp>:-</samp>&rsquo; expansion.
+</p>
+<p>Here are some examples illustrating substring expansion on parameters and
+subscripted arrays:
+</p>
+<pre class="verbatim">$ string=01234567890abcdefgh
+$ echo ${string:7}
+7890abcdefgh
+$ echo ${string:7:0}
+
+$ echo ${string:7:2}
+78
+$ echo ${string:7:-2}
+7890abcdef
+$ echo ${string: -7}
+bcdefgh
+$ echo ${string: -7:0}
+
+$ echo ${string: -7:2}
+bc
+$ echo ${string: -7:-2}
+bcdef
+$ set -- 01234567890abcdefgh
+$ echo ${1:7}
+7890abcdefgh
+$ echo ${1:7:0}
+
+$ echo ${1:7:2}
+78
+$ echo ${1:7:-2}
+7890abcdef
+$ echo ${1: -7}
+bcdefgh
+$ echo ${1: -7:0}
+
+$ echo ${1: -7:2}
+bc
+$ echo ${1: -7:-2}
+bcdef
+$ array[0]=01234567890abcdefgh
+$ echo ${array[0]:7}
+7890abcdefgh
+$ echo ${array[0]:7:0}
+
+$ echo ${array[0]:7:2}
+78
+$ echo ${array[0]:7:-2}
+7890abcdef
+$ echo ${array[0]: -7}
+bcdefgh
+$ echo ${array[0]: -7:0}
+
+$ echo ${array[0]: -7:2}
+bc
+$ echo ${array[0]: -7:-2}
+bcdef
+</pre>
+<p>If <var>parameter</var> is &lsquo;<samp>@</samp>&rsquo;, the result is <var>length</var> positional
+parameters beginning at <var>offset</var>.
+A negative <var>offset</var> is taken relative to one greater than the greatest
+positional parameter, so an offset of -1 evaluates to the last positional
+parameter.
+It is an expansion error if <var>length</var> evaluates to a number less than zero.
+</p>
+<p>The following examples illustrate substring expansion using positional
+parameters:
+</p>
+<pre class="verbatim">$ set -- 1 2 3 4 5 6 7 8 9 0 a b c d e f g h
+$ echo ${@:7}
+7 8 9 0 a b c d e f g h
+$ echo ${@:7:0}
+
+$ echo ${@:7:2}
+7 8
+$ echo ${@:7:-2}
+bash: -2: substring expression &lt; 0
+$ echo ${@: -7:2}
+b c
+$ echo ${@:0}
+./bash 1 2 3 4 5 6 7 8 9 0 a b c d e f g h
+$ echo ${@:0:2}
+./bash 1
+$ echo ${@: -7:0}
+
+</pre>
+<p>If <var>parameter</var> is an indexed array name subscripted
+by &lsquo;<samp>@</samp>&rsquo; or &lsquo;<samp>*</samp>&rsquo;, the result is the <var>length</var>
+members of the array beginning with <code>${<var>parameter</var>[<var>offset</var>]}</code>.
+A negative <var>offset</var> is taken relative to one greater than the maximum
+index of the specified array.
+It is an expansion error if <var>length</var> evaluates to a number less than zero.
+</p>
+<p>These examples show how you can use substring expansion with indexed
+arrays:
+</p>
+<pre class="verbatim">$ array=(0 1 2 3 4 5 6 7 8 9 0 a b c d e f g h)
+$ echo ${array[@]:7}
+7 8 9 0 a b c d e f g h
+$ echo ${array[@]:7:2}
+7 8
+$ echo ${array[@]: -7:2}
+b c
+$ echo ${array[@]: -7:-2}
+bash: -2: substring expression &lt; 0
+$ echo ${array[@]:0}
+0 1 2 3 4 5 6 7 8 9 0 a b c d e f g h
+$ echo ${array[@]:0:2}
+0 1
+$ echo ${array[@]: -7:0}
+
+</pre>
+<p>Substring expansion applied to an associative array produces undefined
+results.
+</p>
+<p>Substring indexing is zero-based unless the positional parameters
+are used, in which case the indexing starts at 1 by default.
+If <var>offset</var> is 0, and the positional parameters are used, <code>$0</code> is
+prefixed to the list.
+</p>
+</dd>
+<dt><code>${!<var>prefix</var>*}</code></dt>
+<dt><code>${!<var>prefix</var>@}</code></dt>
+<dd><p>Expands to the names of variables whose names begin with <var>prefix</var>,
+separated by the first character of the <code>IFS</code> special variable.
+When &lsquo;<samp>@</samp>&rsquo; is used and the expansion appears within double quotes, each
+variable name expands to a separate word.
+</p>
+</dd>
+<dt><code>${!<var>name</var>[@]}</code></dt>
+<dt><code>${!<var>name</var>[*]}</code></dt>
+<dd><p>If <var>name</var> is an array variable, expands to the list of array indices
+(keys) assigned in <var>name</var>.
+If <var>name</var> is not an array, expands to 0 if <var>name</var> is set and null
+otherwise.
+When &lsquo;<samp>@</samp>&rsquo; is used and the expansion appears within double quotes, each
+key expands to a separate word.
+</p>
+</dd>
+<dt><code>${#<var>parameter</var>}</code></dt>
+<dd><p>The length in characters of the expanded value of <var>parameter</var> is
+substituted.
+If <var>parameter</var> is &lsquo;<samp>*</samp>&rsquo; or &lsquo;<samp>@</samp>&rsquo;, the value substituted
+is the number of positional parameters.
+If <var>parameter</var> is an array name subscripted by &lsquo;<samp>*</samp>&rsquo; or &lsquo;<samp>@</samp>&rsquo;, 
+the value substituted is the number of elements in the array.
+If <var>parameter</var>
+is an indexed array name subscripted by a negative number, that number is
+interpreted as relative to one greater than the maximum index of
+<var>parameter</var>, so negative indices count back from the end of the
+array, and an index of -1 references the last element.
+</p>
+</dd>
+<dt><code>${<var>parameter</var>#<var>word</var>}</code></dt>
+<dt><code>${<var>parameter</var>##<var>word</var>}</code></dt>
+<dd><p>The <var>word</var>
+is expanded to produce a pattern and matched according to the rules
+described below (see <a href="#Pattern-Matching">Pattern Matching</a>).  If the pattern matches
+the beginning of the expanded value of <var>parameter</var>,
+then the result of the expansion is the expanded value of <var>parameter</var>
+with the shortest matching pattern (the &lsquo;<samp>#</samp>&rsquo; case) or the
+longest matching pattern (the &lsquo;<samp>##</samp>&rsquo; case) deleted.
+If <var>parameter</var> is &lsquo;<samp>@</samp>&rsquo; or &lsquo;<samp>*</samp>&rsquo;,
+the pattern removal operation is applied to each positional
+parameter in turn, and the expansion is the resultant list.
+If <var>parameter</var> is an array variable subscripted with
+&lsquo;<samp>@</samp>&rsquo; or &lsquo;<samp>*</samp>&rsquo;,
+the pattern removal operation is applied to each member of the
+array in turn, and the expansion is the resultant list.
+</p>
+</dd>
+<dt><code>${<var>parameter</var>%<var>word</var>}</code></dt>
+<dt><code>${<var>parameter</var>%%<var>word</var>}</code></dt>
+<dd><p>The <var>word</var>
+is expanded to produce a pattern and matched according to the rules
+described below (see <a href="#Pattern-Matching">Pattern Matching</a>).
+If the pattern matches a trailing portion of the expanded value of
+<var>parameter</var>, then the result of the expansion is the value of
+<var>parameter</var> with the shortest matching pattern (the &lsquo;<samp>%</samp>&rsquo; case)
+or the longest matching pattern (the &lsquo;<samp>%%</samp>&rsquo; case) deleted.
+If <var>parameter</var> is &lsquo;<samp>@</samp>&rsquo; or &lsquo;<samp>*</samp>&rsquo;,
+the pattern removal operation is applied to each positional
+parameter in turn, and the expansion is the resultant list.
+If <var>parameter</var>
+is an array variable subscripted with &lsquo;<samp>@</samp>&rsquo; or &lsquo;<samp>*</samp>&rsquo;,
+the pattern removal operation is applied to each member of the
+array in turn, and the expansion is the resultant list.
+</p>
+</dd>
+<dt><code>${<var>parameter</var>/<var>pattern</var>/<var>string</var>}</code></dt>
+<dd>
+<p>The <var>pattern</var> is expanded to produce a pattern just as in
+filename expansion.
+<var>Parameter</var> is expanded and the longest match of <var>pattern</var>
+against its value is replaced with <var>string</var>.
+The match is performed according to the rules described below
+(see <a href="#Pattern-Matching">Pattern Matching</a>).
+If <var>pattern</var> begins with &lsquo;<samp>/</samp>&rsquo;, all matches of <var>pattern</var> are
+replaced with <var>string</var>.  Normally only the first match is replaced.
+If <var>pattern</var> begins with &lsquo;<samp>#</samp>&rsquo;, it must match at the beginning
+of the expanded value of <var>parameter</var>.
+If <var>pattern</var> begins with &lsquo;<samp>%</samp>&rsquo;, it must match at the end
+of the expanded value of <var>parameter</var>.
+If <var>string</var> is null, matches of <var>pattern</var> are deleted
+and the <code>/</code> following <var>pattern</var> may be omitted.
+If the <code>nocasematch</code> shell option   
+(see the description of <code>shopt</code> in <a href="#The-Shopt-Builtin">The Shopt Builtin</a>)
+is enabled, the match is performed without regard to the case   
+of alphabetic characters.
+If <var>parameter</var> is &lsquo;<samp>@</samp>&rsquo; or &lsquo;<samp>*</samp>&rsquo;,
+the substitution operation is applied to each positional
+parameter in turn, and the expansion is the resultant list.
+If <var>parameter</var>
+is an array variable subscripted with &lsquo;<samp>@</samp>&rsquo; or &lsquo;<samp>*</samp>&rsquo;,
+the substitution operation is applied to each member of the
+array in turn, and the expansion is the resultant list.
+</p>
+</dd>
+<dt><code>${<var>parameter</var>^<var>pattern</var>}</code></dt>
+<dt><code>${<var>parameter</var>^^<var>pattern</var>}</code></dt>
+<dt><code>${<var>parameter</var>,<var>pattern</var>}</code></dt>
+<dt><code>${<var>parameter</var>,,<var>pattern</var>}</code></dt>
+<dd><p>This expansion modifies the case of alphabetic characters in <var>parameter</var>.
+The <var>pattern</var> is expanded to produce a pattern just as in
+filename expansion.
+Each character in the expanded value of <var>parameter</var> is tested against
+<var>pattern</var>, and, if it matches the pattern, its case is converted.
+The pattern should not attempt to match more than one character.
+The &lsquo;<samp>^</samp>&rsquo; operator converts lowercase letters matching <var>pattern</var>
+to uppercase; the &lsquo;<samp>,</samp>&rsquo; operator converts matching uppercase letters
+to lowercase.
+The &lsquo;<samp>^^</samp>&rsquo; and &lsquo;<samp>,,</samp>&rsquo; expansions convert each matched character in the
+expanded value; the &lsquo;<samp>^</samp>&rsquo; and &lsquo;<samp>,</samp>&rsquo; expansions match and convert only
+the first character in the expanded value.
+If <var>pattern</var> is omitted, it is treated like a &lsquo;<samp>?</samp>&rsquo;, which matches
+every character.
+If <var>parameter</var> is &lsquo;<samp>@</samp>&rsquo; or &lsquo;<samp>*</samp>&rsquo;,
+the case modification operation is applied to each positional
+parameter in turn, and the expansion is the resultant list.
+If <var>parameter</var>
+is an array variable subscripted with &lsquo;<samp>@</samp>&rsquo; or &lsquo;<samp>*</samp>&rsquo;,
+the case modification operation is applied to each member of the
+array in turn, and the expansion is the resultant list.
+</p>
+</dd>
+<dt><code>${<var>parameter</var>@<var>operator</var>}</code></dt>
+<dd><p>The expansion is either a transformation of the value of <var>parameter</var>
+or information about <var>parameter</var> itself, depending on the value of
+<var>operator</var>.  Each <var>operator</var> is a single letter:
+</p>
+<dl compact="compact">
+<dt><code>U</code></dt>
+<dd><p>The expansion is a string that is the value of <var>parameter</var> with lowercase
+alphabetic characters converted to uppercase.
+</p></dd>
+<dt><code>u</code></dt>
+<dd><p>The expansion is a string that is the value of <var>parameter</var> with the first
+character converted to uppercase, if it is alphabetic.
+</p></dd>
+<dt><code>L</code></dt>
+<dd><p>The expansion is a string that is the value of <var>parameter</var> with uppercase
+alphabetic characters converted to lowercase.
+</p></dd>
+<dt><code>Q</code></dt>
+<dd><p>The expansion is a string that is the value of <var>parameter</var> quoted in a
+format that can be reused as input.
+</p></dd>
+<dt><code>E</code></dt>
+<dd><p>The expansion is a string that is the value of <var>parameter</var> with backslash
+escape sequences expanded as with the <code>$'&hellip;'</code> quoting mechanism.
+</p></dd>
+<dt><code>P</code></dt>
+<dd><p>The expansion is a string that is the result of expanding the value of
+<var>parameter</var> as if it were a prompt string (see <a href="#Controlling-the-Prompt">Controlling the Prompt</a>).
+</p></dd>
+<dt><code>A</code></dt>
+<dd><p>The expansion is a string in the form of
+an assignment statement or <code>declare</code> command that, if
+evaluated, will recreate <var>parameter</var> with its attributes and value.
+</p></dd>
+<dt><code>K</code></dt>
+<dd><p>Produces a possibly-quoted version of the value of <var>parameter</var>,
+except that it prints the values of
+indexed and associative arrays as a sequence of quoted key-value pairs
+(see <a href="#Arrays">Arrays</a>).
+</p></dd>
+<dt><code>a</code></dt>
+<dd><p>The expansion is a string consisting of flag values representing
+<var>parameter</var>&rsquo;s attributes.
+</p></dd>
+</dl>
+
+<p>If <var>parameter</var> is &lsquo;<samp>@</samp>&rsquo; or &lsquo;<samp>*</samp>&rsquo;,
+the operation is applied to each positional
+parameter in turn, and the expansion is the resultant list.
+If <var>parameter</var>
+is an array variable subscripted with &lsquo;<samp>@</samp>&rsquo; or &lsquo;<samp>*</samp>&rsquo;,
+the operation is applied to each member of the
+array in turn, and the expansion is the resultant list.
+</p>
+<p>The result of the expansion is subject to word splitting and filename
+expansion as described below.
+</p></dd>
+</dl>
+
+<hr>
+<span id="Command-Substitution"></span><div class="header">
+<p>
+Next: <a href="#Arithmetic-Expansion" accesskey="n" rel="next">Arithmetic Expansion</a>, Previous: <a href="#Shell-Parameter-Expansion" accesskey="p" rel="prev">Shell Parameter Expansion</a>, Up: <a href="#Shell-Expansions" accesskey="u" rel="up">Shell Expansions</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Command-Substitution-1"></span><h4 class="subsection">3.5.4 Command Substitution</h4>
+<span id="index-command-substitution"></span>
+
+<p>Command substitution allows the output of a command to replace
+the command itself.
+Command substitution occurs when a command is enclosed as follows:
+</p><div class="example">
+<pre class="example">$(<var>command</var>)
+</pre></div>
+<p>or
+</p><div class="example">
+<pre class="example">`<var>command</var>`
+</pre></div>
+
+<p>Bash performs the expansion by executing <var>command</var> in a subshell environment
+and replacing the command substitution with the standard output of the
+command, with any trailing newlines deleted.
+Embedded newlines are not deleted, but they may be removed during
+word splitting.
+The command substitution <code>$(cat <var>file</var>)</code> can be
+replaced by the equivalent but faster <code>$(&lt; <var>file</var>)</code>.
+</p>
+<p>When the old-style backquote form of substitution is used,
+backslash retains its literal meaning except when followed by
+&lsquo;<samp>$</samp>&rsquo;, &lsquo;<samp>`</samp>&rsquo;, or &lsquo;<samp>\</samp>&rsquo;. 
+The first backquote not preceded by a backslash terminates the
+command substitution.
+When using the <code>$(<var>command</var>)</code> form, all characters between
+the parentheses make up the command; none are treated specially.
+</p>
+<p>Command substitutions may be nested.  To nest when using the backquoted
+form, escape the inner backquotes with backslashes.
+</p>
+<p>If the substitution appears within double quotes, word splitting and
+filename expansion are not performed on the results.
+</p>
+<hr>
+<span id="Arithmetic-Expansion"></span><div class="header">
+<p>
+Next: <a href="#Process-Substitution" accesskey="n" rel="next">Process Substitution</a>, Previous: <a href="#Command-Substitution" accesskey="p" rel="prev">Command Substitution</a>, Up: <a href="#Shell-Expansions" accesskey="u" rel="up">Shell Expansions</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Arithmetic-Expansion-1"></span><h4 class="subsection">3.5.5 Arithmetic Expansion</h4>
+<span id="index-expansion_002c-arithmetic"></span>
+<span id="index-arithmetic-expansion"></span>
+
+<p>Arithmetic expansion allows the evaluation of an arithmetic expression
+and the substitution of the result.  The format for arithmetic expansion is:
+</p>
+<div class="example">
+<pre class="example">$(( <var>expression</var> ))
+</pre></div>
+
+<p>The expression is treated as if it were within double quotes, but
+a double quote inside the parentheses is not treated specially.
+All tokens in the expression undergo parameter and variable expansion,
+command substitution, and quote removal.
+The result is treated as the arithmetic expression to be evaluated.
+Arithmetic expansions may be nested. 
+</p>
+<p>The evaluation is performed according to the rules listed below
+(see <a href="#Shell-Arithmetic">Shell Arithmetic</a>).
+If the expression is invalid, Bash prints a message indicating
+failure to the standard error and no substitution occurs.
+</p>
+<hr>
+<span id="Process-Substitution"></span><div class="header">
+<p>
+Next: <a href="#Word-Splitting" accesskey="n" rel="next">Word Splitting</a>, Previous: <a href="#Arithmetic-Expansion" accesskey="p" rel="prev">Arithmetic Expansion</a>, Up: <a href="#Shell-Expansions" accesskey="u" rel="up">Shell Expansions</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Process-Substitution-1"></span><h4 class="subsection">3.5.6 Process Substitution</h4>
+<span id="index-process-substitution"></span>
+
+<p>Process substitution allows a process&rsquo;s input or output to be
+referred to using a filename.
+It takes the form of 
+</p><div class="example">
+<pre class="example">&lt;(<var>list</var>)
+</pre></div>
+<p>or
+</p><div class="example">
+<pre class="example">&gt;(<var>list</var>)
+</pre></div>
+<p>The process <var>list</var> is run asynchronously, and its input or output 
+appears as a filename.
+This filename is
+passed as an argument to the current command as the result of the
+expansion.
+If the <code>&gt;(<var>list</var>)</code> form is used, writing to
+the file will provide input for <var>list</var>.  If the
+<code>&lt;(<var>list</var>)</code> form is used, the file passed as an
+argument should be read to obtain the output of <var>list</var>.
+Note that no space may appear between the <code>&lt;</code> or <code>&gt;</code>
+and the left parenthesis, otherwise the construct would be interpreted
+as a redirection.
+Process substitution is supported on systems that support named
+pipes (<small>FIFO</small>s) or the <samp>/dev/fd</samp> method of naming open files.
+</p>
+<p>When available, process substitution is performed simultaneously with
+parameter and variable expansion, command substitution, and arithmetic
+expansion.
+</p>
+<hr>
+<span id="Word-Splitting"></span><div class="header">
+<p>
+Next: <a href="#Filename-Expansion" accesskey="n" rel="next">Filename Expansion</a>, Previous: <a href="#Process-Substitution" accesskey="p" rel="prev">Process Substitution</a>, Up: <a href="#Shell-Expansions" accesskey="u" rel="up">Shell Expansions</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Word-Splitting-1"></span><h4 class="subsection">3.5.7 Word Splitting</h4>
+<span id="index-word-splitting"></span>
+
+<p>The shell scans the results of parameter expansion, command substitution,
+and arithmetic expansion that did not occur within double quotes for
+word splitting.
+</p>
+<p>The shell treats each character of <code>$IFS</code> as a delimiter, and splits
+the results of the other expansions into words using these characters
+as field terminators.
+If <code>IFS</code> is unset, or its value is exactly <code>&lt;space&gt;&lt;tab&gt;&lt;newline&gt;</code>,
+the default, then sequences of
+<code> &lt;space&gt;</code>, <code>&lt;tab&gt;</code>, and <code>&lt;newline&gt;</code>
+at the beginning and end of the results of the previous
+expansions are ignored, and any sequence of <code>IFS</code>
+characters not at the beginning or end serves to delimit words.
+If <code>IFS</code> has a value other than the default, then sequences of
+the whitespace characters <code>space</code>, <code>tab</code>, and <code>newline</code>
+are ignored at the beginning and end of the
+word, as long as the whitespace character is in the
+value of <code>IFS</code> (an <code>IFS</code> whitespace character).
+Any character in <code>IFS</code> that is not <code>IFS</code>
+whitespace, along with any adjacent <code>IFS</code>
+whitespace characters, delimits a field.  A sequence of <code>IFS</code>
+whitespace characters is also treated as a delimiter.
+If the value of <code>IFS</code> is null, no word splitting occurs.
+</p>
+<p>Explicit null arguments (<code>&quot;&quot;</code> or <code>''</code>) are retained
+and passed to commands as empty strings.
+Unquoted implicit null arguments, resulting from the expansion of
+parameters that have no values, are removed.
+If a parameter with no value is expanded within double quotes, a
+null argument results and is retained
+and passed to a command as an empty string.
+When a quoted null argument appears as part of a word whose expansion is
+non-null, the null argument is removed.
+That is, the word
+<code>-d''</code> becomes <code>-d</code> after word splitting and
+null argument removal.
+</p>
+<p>Note that if no expansion occurs, no splitting
+is performed.
+</p>
+<hr>
+<span id="Filename-Expansion"></span><div class="header">
+<p>
+Next: <a href="#Quote-Removal" accesskey="n" rel="next">Quote Removal</a>, Previous: <a href="#Word-Splitting" accesskey="p" rel="prev">Word Splitting</a>, Up: <a href="#Shell-Expansions" accesskey="u" rel="up">Shell Expansions</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Filename-Expansion-1"></span><h4 class="subsection">3.5.8 Filename Expansion</h4>
+<table class="menu" border="0" cellspacing="0">
+<tr><td align="left" valign="top">&bull; <a href="#Pattern-Matching" accesskey="1">Pattern Matching</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How the shell matches patterns.
+</td></tr>
+</table>
+<span id="index-expansion_002c-filename"></span>
+<span id="index-expansion_002c-pathname"></span>
+<span id="index-filename-expansion"></span>
+<span id="index-pathname-expansion"></span>
+
+<p>After word splitting, unless the <samp>-f</samp> option has been set
+(see <a href="#The-Set-Builtin">The Set Builtin</a>), Bash scans each word for the characters
+&lsquo;<samp>*</samp>&rsquo;, &lsquo;<samp>?</samp>&rsquo;, and &lsquo;<samp>[</samp>&rsquo;.
+If one of these characters appears, and is not quoted, then the word is
+regarded as a <var>pattern</var>,
+and replaced with an alphabetically sorted list of
+filenames matching the pattern (see <a href="#Pattern-Matching">Pattern Matching</a>).
+If no matching filenames are found,
+and the shell option <code>nullglob</code> is disabled, the word is left
+unchanged.
+If the <code>nullglob</code> option is set, and no matches are found, the word
+is removed.
+If the <code>failglob</code> shell option is set, and no matches are found,
+an error message is printed and the command is not executed.
+If the shell option <code>nocaseglob</code> is enabled, the match is performed
+without regard to the case of alphabetic characters.
+</p>
+<p>When a pattern is used for filename expansion, the character &lsquo;<samp>.</samp>&rsquo;
+at the start of a filename or immediately following a slash
+must be matched explicitly, unless the shell option <code>dotglob</code> is set.
+The filenames &lsquo;<samp>.</samp>&rsquo; and &lsquo;<samp>..</samp>&rsquo; must always be matched explicitly,
+even if <code>dotglob</code> is set.
+In other cases, the &lsquo;<samp>.</samp>&rsquo; character is not treated specially.
+</p>
+<p>When matching a filename, the slash character must always be
+matched explicitly by a slash in the pattern, but in other matching
+contexts it can be matched by a special pattern character as described
+below (see <a href="#Pattern-Matching">Pattern Matching</a>).
+</p>
+<p>See the description of <code>shopt</code> in <a href="#The-Shopt-Builtin">The Shopt Builtin</a>,
+for a description of the <code>nocaseglob</code>, <code>nullglob</code>,
+<code>failglob</code>, and <code>dotglob</code> options.
+</p>
+<p>The <code>GLOBIGNORE</code>
+shell variable may be used to restrict the set of file names matching a
+pattern.  If <code>GLOBIGNORE</code>
+is set, each matching file name that also matches one of the patterns in
+<code>GLOBIGNORE</code> is removed from the list of matches.
+If the <code>nocaseglob</code> option is set, the matching against the patterns in
+<code>GLOBIGNORE</code> is performed without regard to case.
+The filenames
+<samp>.</samp> and <samp>..</samp>
+are always ignored when <code>GLOBIGNORE</code>
+is set and not null.
+However, setting <code>GLOBIGNORE</code> to a non-null value has the effect of
+enabling the <code>dotglob</code>
+shell option, so all other filenames beginning with a
+&lsquo;<samp>.</samp>&rsquo; will match.
+To get the old behavior of ignoring filenames beginning with a
+&lsquo;<samp>.</samp>&rsquo;, make &lsquo;<samp>.*</samp>&rsquo; one of the patterns in <code>GLOBIGNORE</code>.
+The <code>dotglob</code> option is disabled when <code>GLOBIGNORE</code>
+is unset.
+</p>
+<hr>
+<span id="Pattern-Matching"></span><div class="header">
+<p>
+Up: <a href="#Filename-Expansion" accesskey="u" rel="up">Filename Expansion</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Pattern-Matching-1"></span><h4 class="subsubsection">3.5.8.1 Pattern Matching</h4>
+<span id="index-pattern-matching"></span>
+<span id="index-matching_002c-pattern"></span>
+
+<p>Any character that appears in a pattern, other than the special pattern
+characters described below, matches itself.
+The <small>NUL</small> character may not occur in a pattern.
+A backslash escapes the following character; the
+escaping backslash is discarded when matching.
+The special pattern characters must be quoted if they are to be matched
+literally.
+</p>
+<p>The special pattern characters have the following meanings:
+</p><dl compact="compact">
+<dt><code>*</code></dt>
+<dd><p>Matches any string, including the null string.
+When the <code>globstar</code> shell option is enabled, and &lsquo;<samp>*</samp>&rsquo; is used in
+a filename expansion context, two adjacent &lsquo;<samp>*</samp>&rsquo;s used as a single
+pattern will match all files and zero or more directories and
+subdirectories.
+If followed by a &lsquo;<samp>/</samp>&rsquo;, two adjacent &lsquo;<samp>*</samp>&rsquo;s will match only
+directories and subdirectories.
+</p></dd>
+<dt><code>?</code></dt>
+<dd><p>Matches any single character.
+</p></dd>
+<dt><code>[&hellip;]</code></dt>
+<dd><p>Matches any one of the enclosed characters.  A pair of characters
+separated by a hyphen denotes a <var>range expression</var>;
+any character that falls between those two characters, inclusive,
+using the current locale&rsquo;s collating sequence and character set,
+is matched.  If the first character following the
+&lsquo;<samp>[</samp>&rsquo; is a &lsquo;<samp>!</samp>&rsquo;  or a &lsquo;<samp>^</samp>&rsquo;
+then any character not enclosed is matched.  A &lsquo;<samp>-</samp>&rsquo;
+may be matched by including it as the first or last character
+in the set.  A &lsquo;<samp>]</samp>&rsquo; may be matched by including it as the first
+character in the set.
+The sorting order of characters in range expressions is determined by
+the current locale and the values of the
+<code>LC_COLLATE</code> and <code>LC_ALL</code> shell variables, if set.
+</p>
+<p>For example, in the default C locale, &lsquo;<samp>[a-dx-z]</samp>&rsquo; is equivalent to
+&lsquo;<samp>[abcdxyz]</samp>&rsquo;.  Many locales sort characters in dictionary order, and in
+these locales &lsquo;<samp>[a-dx-z]</samp>&rsquo; is typically not equivalent to &lsquo;<samp>[abcdxyz]</samp>&rsquo;;
+it might be equivalent to &lsquo;<samp>[aBbCcDdxXyYz]</samp>&rsquo;, for example.  To obtain
+the traditional interpretation of ranges in bracket expressions, you can
+force the use of the C locale by setting the <code>LC_COLLATE</code> or
+<code>LC_ALL</code> environment variable to the value &lsquo;<samp>C</samp>&rsquo;, or enable the
+<code>globasciiranges</code> shell option.
+</p>
+<p>Within &lsquo;<samp>[</samp>&rsquo; and &lsquo;<samp>]</samp>&rsquo;, <var>character classes</var> can be specified
+using the syntax
+<code>[:</code><var>class</var><code>:]</code>, where <var>class</var> is one of the
+following classes defined in the <small>POSIX</small> standard:
+</p><div class="example">
+<pre class="example">alnum   alpha   ascii   blank   cntrl   digit   graph   lower
+print   punct   space   upper   word    xdigit
+</pre></div>
+<p>A character class matches any character belonging to that class.
+The <code>word</code> character class matches letters, digits, and the character
+&lsquo;<samp>_</samp>&rsquo;.
+</p>
+<p>Within &lsquo;<samp>[</samp>&rsquo; and &lsquo;<samp>]</samp>&rsquo;, an <var>equivalence class</var> can be
+specified using the syntax <code>[=</code><var>c</var><code>=]</code>, which
+matches all characters with the same collation weight (as defined
+by the current locale) as the character <var>c</var>.
+</p>
+<p>Within &lsquo;<samp>[</samp>&rsquo; and &lsquo;<samp>]</samp>&rsquo;, the syntax <code>[.</code><var>symbol</var><code>.]</code>
+matches the collating symbol <var>symbol</var>.
+</p></dd>
+</dl>
+
+<p>If the <code>extglob</code> shell option is enabled using the <code>shopt</code>
+builtin, several extended pattern matching operators are recognized.
+In the following description, a <var>pattern-list</var> is a list of one
+or more patterns separated by a &lsquo;<samp>|</samp>&rsquo;.
+Composite patterns may be formed using one or more of the following
+sub-patterns:
+</p>
+<dl compact="compact">
+<dt><code>?(<var>pattern-list</var>)</code></dt>
+<dd><p>Matches zero or one occurrence of the given patterns.
+</p>
+</dd>
+<dt><code>*(<var>pattern-list</var>)</code></dt>
+<dd><p>Matches zero or more occurrences of the given patterns.
+</p>
+</dd>
+<dt><code>+(<var>pattern-list</var>)</code></dt>
+<dd><p>Matches one or more occurrences of the given patterns.
+</p>
+</dd>
+<dt><code>@(<var>pattern-list</var>)</code></dt>
+<dd><p>Matches one of the given patterns.
+</p>
+</dd>
+<dt><code>!(<var>pattern-list</var>)</code></dt>
+<dd><p>Matches anything except one of the given patterns.
+</p></dd>
+</dl>
+
+<p>Complicated extended pattern matching against long strings is slow,
+especially when the patterns contain alternations and the strings
+contain multiple matches.
+Using separate matches against shorter strings, or using arrays of
+strings instead of a single long string, may be faster.
+</p>
+<hr>
+<span id="Quote-Removal"></span><div class="header">
+<p>
+Previous: <a href="#Filename-Expansion" accesskey="p" rel="prev">Filename Expansion</a>, Up: <a href="#Shell-Expansions" accesskey="u" rel="up">Shell Expansions</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Quote-Removal-1"></span><h4 class="subsection">3.5.9 Quote Removal</h4>
+
+<p>After the preceding expansions, all unquoted occurrences of the
+characters &lsquo;<samp>\</samp>&rsquo;, &lsquo;<samp>'</samp>&rsquo;, and &lsquo;<samp>&quot;</samp>&rsquo; that did not
+result from one of the above expansions are removed.
+</p>
+<hr>
+<span id="Redirections"></span><div class="header">
+<p>
+Next: <a href="#Executing-Commands" accesskey="n" rel="next">Executing Commands</a>, Previous: <a href="#Shell-Expansions" accesskey="p" rel="prev">Shell Expansions</a>, Up: <a href="#Basic-Shell-Features" accesskey="u" rel="up">Basic Shell Features</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Redirections-1"></span><h3 class="section">3.6 Redirections</h3>
+<span id="index-redirection"></span>
+
+<p>Before a command is executed, its input and output
+may be <var>redirected</var>
+using a special notation interpreted by the shell.
+Redirection allows commands&rsquo; file handles to be
+duplicated, opened, closed,
+made to refer to different files,
+and can change the files the command reads from and writes to.
+Redirection may also be used to modify file handles in the
+current shell execution environment.  The following redirection
+operators may precede or appear anywhere within a
+simple command or may follow a command.
+Redirections are processed in the order they appear, from
+left to right.
+</p>
+<p>Each redirection that may be preceded by a file descriptor number
+may instead be preceded by a word of the form {<var>varname</var>}.
+In this case, for each redirection operator except
+&gt;&amp;- and &lt;&amp;-, the shell will allocate a file descriptor greater
+than 10 and assign it to {<var>varname</var>}.  If &gt;&amp;- or &lt;&amp;- is preceded
+by {<var>varname</var>}, the value of <var>varname</var> defines the file
+descriptor to close.
+If {<var>varname</var>} is supplied, the redirection persists beyond
+the scope of the command, allowing the shell programmer to manage
+the file descriptor&rsquo;s lifetime manually.
+</p>
+<p>In the following descriptions, if the file descriptor number is
+omitted, and the first character of the redirection operator is
+&lsquo;<samp>&lt;</samp>&rsquo;, the redirection refers to the standard input (file
+descriptor 0).  If the first character of the redirection operator
+is &lsquo;<samp>&gt;</samp>&rsquo;, the redirection refers to the standard output (file
+descriptor 1).
+</p>
+<p>The word following the redirection operator in the following
+descriptions, unless otherwise noted, is subjected to brace expansion,
+tilde expansion, parameter expansion, command substitution, arithmetic
+expansion, quote removal, filename expansion, and word splitting.
+If it expands to more than one word, Bash reports an error.
+</p>
+<p>Note that the order of redirections is significant.  For example,
+the command
+</p><div class="example">
+<pre class="example">ls &gt; <var>dirlist</var> 2&gt;&amp;1
+</pre></div>
+<p>directs both standard output (file descriptor 1) and standard error
+(file descriptor 2) to the file <var>dirlist</var>, while the command
+</p><div class="example">
+<pre class="example">ls 2&gt;&amp;1 &gt; <var>dirlist</var>
+</pre></div>
+<p>directs only the standard output to file <var>dirlist</var>,
+because the standard error was made a copy of the standard output
+before the standard output was redirected to <var>dirlist</var>.
+</p>
+<p>Bash handles several filenames specially when they are used in
+redirections, as described in the following table.
+If the operating system on which Bash is running provides these
+special files, bash will use them; otherwise it will emulate them
+internally with the behavior described below.
+</p>
+<dl compact="compact">
+<dt><code>/dev/fd/<var>fd</var></code></dt>
+<dd><p>If <var>fd</var> is a valid integer, file descriptor <var>fd</var> is duplicated.
+</p>
+</dd>
+<dt><code>/dev/stdin</code></dt>
+<dd><p>File descriptor 0 is duplicated.
+</p>
+</dd>
+<dt><code>/dev/stdout</code></dt>
+<dd><p>File descriptor 1 is duplicated.
+</p>
+</dd>
+<dt><code>/dev/stderr</code></dt>
+<dd><p>File descriptor 2 is duplicated.
+</p>
+</dd>
+<dt><code>/dev/tcp/<var>host</var>/<var>port</var></code></dt>
+<dd><p>If <var>host</var> is a valid hostname or Internet address, and <var>port</var>
+is an integer port number or service name, Bash attempts to open
+the corresponding TCP socket.
+</p>
+</dd>
+<dt><code>/dev/udp/<var>host</var>/<var>port</var></code></dt>
+<dd><p>If <var>host</var> is a valid hostname or Internet address, and <var>port</var>
+is an integer port number or service name, Bash attempts to open 
+the corresponding UDP socket.
+</p></dd>
+</dl>
+
+<p>A failure to open or create a file causes the redirection to fail.
+</p>
+<p>Redirections using file descriptors greater than 9 should be used with
+care, as they may conflict with file descriptors the shell uses
+internally.
+</p>
+<span id="Redirecting-Input"></span><h4 class="subsection">3.6.1 Redirecting Input</h4>
+<p>Redirection of input causes the file whose name results from
+the expansion of <var>word</var>
+to be opened for reading on file descriptor <code>n</code>,
+or the standard input (file descriptor 0) if <code>n</code>
+is not specified.
+</p>
+<p>The general format for redirecting input is:
+</p><div class="example">
+<pre class="example">[<var>n</var>]&lt;<var>word</var>
+</pre></div>
+
+<span id="Redirecting-Output"></span><h4 class="subsection">3.6.2 Redirecting Output</h4>
+<p>Redirection of output causes the file whose name results from
+the expansion of <var>word</var>
+to be opened for writing on file descriptor <var>n</var>,
+or the standard output (file descriptor 1) if <var>n</var>
+is not specified.  If the file does not exist it is created;
+if it does exist it is truncated to zero size.
+</p>
+<p>The general format for redirecting output is:
+</p><div class="example">
+<pre class="example">[<var>n</var>]&gt;[|]<var>word</var>
+</pre></div>
+
+<p>If the redirection operator is &lsquo;<samp>&gt;</samp>&rsquo;, and the <code>noclobber</code>
+option to the <code>set</code> builtin has been enabled, the redirection
+will fail if the file whose name results from the expansion of
+<var>word</var> exists and is a regular file.
+If the redirection operator is &lsquo;<samp>&gt;|</samp>&rsquo;, or the redirection operator is
+&lsquo;<samp>&gt;</samp>&rsquo; and the <code>noclobber</code> option is not enabled, the redirection
+is attempted even if the file named by <var>word</var> exists.
+</p>
+<span id="Appending-Redirected-Output"></span><h4 class="subsection">3.6.3 Appending Redirected Output</h4>
+<p>Redirection of output in this fashion
+causes the file whose name results from
+the expansion of <var>word</var>
+to be opened for appending on file descriptor <var>n</var>,
+or the standard output (file descriptor 1) if <var>n</var>
+is not specified.  If the file does not exist it is created.
+</p>
+<p>The general format for appending output is:
+</p><div class="example">
+<pre class="example">[<var>n</var>]&gt;&gt;<var>word</var>
+</pre></div>
+
+<span id="Redirecting-Standard-Output-and-Standard-Error"></span><h4 class="subsection">3.6.4 Redirecting Standard Output and Standard Error</h4>
+<p>This construct allows both the
+standard output (file descriptor 1) and
+the standard error output (file descriptor 2)
+to be redirected to the file whose name is the
+expansion of <var>word</var>.
+</p>
+<p>There are two formats for redirecting standard output and
+standard error:
+</p><div class="example">
+<pre class="example">&amp;&gt;<var>word</var>
+</pre></div>
+<p>and
+</p><div class="example">
+<pre class="example">&gt;&amp;<var>word</var>
+</pre></div>
+<p>Of the two forms, the first is preferred.
+This is semantically equivalent to
+</p><div class="example">
+<pre class="example">&gt;<var>word</var> 2&gt;&amp;1
+</pre></div>
+<p>When using the second form, <var>word</var> may not expand to a number or
+&lsquo;<samp>-</samp>&rsquo;.  If it does, other redirection operators apply
+(see Duplicating File Descriptors below) for compatibility reasons.
+</p>
+<span id="Appending-Standard-Output-and-Standard-Error"></span><h4 class="subsection">3.6.5 Appending Standard Output and Standard Error</h4>
+<p>This construct allows both the
+standard output (file descriptor 1) and
+the standard error output (file descriptor 2)
+to be appended to the file whose name is the
+expansion of <var>word</var>.
+</p>
+<p>The format for appending standard output and standard error is:
+</p><div class="example">
+<pre class="example">&amp;&gt;&gt;<var>word</var>
+</pre></div>
+<p>This is semantically equivalent to
+</p><div class="example">
+<pre class="example">&gt;&gt;<var>word</var> 2&gt;&amp;1
+</pre></div>
+<p>(see Duplicating File Descriptors below).
+</p>
+<span id="Here-Documents"></span><h4 class="subsection">3.6.6 Here Documents</h4>
+<p>This type of redirection instructs the shell to read input from the
+current source until a line containing only <var>word</var>
+(with no trailing blanks) is seen.  All of
+the lines read up to that point are then used as the standard
+input (or file descriptor <var>n</var> if <var>n</var> is specified) for a command.
+</p>
+<p>The format of here-documents is:
+</p><div class="example">
+<pre class="example">[<var>n</var>]&lt;&lt;[-]<var>word</var>
+        <var>here-document</var>
+<var>delimiter</var>
+</pre></div>
+
+<p>No parameter and variable expansion, command substitution,
+arithmetic expansion, or filename expansion is performed on
+<var>word</var>.  If any part of <var>word</var> is quoted, the
+<var>delimiter</var> is the result of quote removal on <var>word</var>,
+and the lines in the here-document are not expanded.
+If <var>word</var> is unquoted,
+all lines of the here-document are subjected to
+parameter expansion, command substitution, and arithmetic expansion,
+the character sequence <code>\newline</code> is ignored, and &lsquo;<samp>\</samp>&rsquo;
+must be used to quote the characters
+&lsquo;<samp>\</samp>&rsquo;, &lsquo;<samp>$</samp>&rsquo;, and &lsquo;<samp>`</samp>&rsquo;.
+</p>
+<p>If the redirection operator is &lsquo;<samp>&lt;&lt;-</samp>&rsquo;,
+then all leading tab characters are stripped from input lines and the
+line containing <var>delimiter</var>.
+This allows here-documents within shell scripts to be indented in a
+natural fashion.
+</p>
+<span id="Here-Strings"></span><h4 class="subsection">3.6.7 Here Strings</h4>
+<p>A variant of here documents, the format is:
+</p><div class="example">
+<pre class="example">[<var>n</var>]&lt;&lt;&lt; <var>word</var>
+</pre></div>
+
+<p>The <var>word</var> undergoes
+tilde expansion, parameter and variable expansion,
+command substitution, arithmetic expansion, and quote removal.
+Filename expansion and word splitting are not performed.
+The result is supplied as a single string,
+with a newline appended,
+to the command on its
+standard input (or file descriptor <var>n</var> if <var>n</var> is specified).
+</p>
+<span id="Duplicating-File-Descriptors"></span><h4 class="subsection">3.6.8 Duplicating File Descriptors</h4>
+<p>The redirection operator
+</p><div class="example">
+<pre class="example">[<var>n</var>]&lt;&amp;<var>word</var>
+</pre></div>
+<p>is used to duplicate input file descriptors.
+If <var>word</var>
+expands to one or more digits, the file descriptor denoted by <var>n</var>
+is made to be a copy of that file descriptor.
+If the digits in <var>word</var> do not specify a file descriptor open for
+input, a redirection error occurs.
+If <var>word</var>
+evaluates to &lsquo;<samp>-</samp>&rsquo;, file descriptor <var>n</var> is closed.
+If <var>n</var> is not specified, the standard input (file descriptor 0) is used.
+</p>
+<p>The operator
+</p><div class="example">
+<pre class="example">[<var>n</var>]&gt;&amp;<var>word</var>
+</pre></div>
+<p>is used similarly to duplicate output file descriptors.  If
+<var>n</var> is not specified, the standard output (file descriptor 1) is used.
+If the digits in <var>word</var> do not specify a file descriptor open for
+output, a redirection error occurs.
+If <var>word</var>
+evaluates to &lsquo;<samp>-</samp>&rsquo;, file descriptor <var>n</var> is closed.
+As a special case, if <var>n</var> is omitted, and <var>word</var> does not
+expand to one or more digits or &lsquo;<samp>-</samp>&rsquo;, the standard output and standard
+error are redirected as described previously.
+</p>
+<span id="Moving-File-Descriptors"></span><h4 class="subsection">3.6.9 Moving File Descriptors</h4>
+<p>The redirection operator
+</p><div class="example">
+<pre class="example">[<var>n</var>]&lt;&amp;<var>digit</var>-
+</pre></div>
+<p>moves the file descriptor <var>digit</var> to file descriptor <var>n</var>,
+or the standard input (file descriptor 0) if <var>n</var> is not specified.
+<var>digit</var> is closed after being duplicated to <var>n</var>.
+</p>
+<p>Similarly, the redirection operator
+</p><div class="example">
+<pre class="example">[<var>n</var>]&gt;&amp;<var>digit</var>-
+</pre></div>
+<p>moves the file descriptor <var>digit</var> to file descriptor <var>n</var>,
+or the standard output (file descriptor 1) if <var>n</var> is not specified.
+</p>
+<span id="Opening-File-Descriptors-for-Reading-and-Writing"></span><h4 class="subsection">3.6.10 Opening File Descriptors for Reading and Writing</h4>
+<p>The redirection operator
+</p><div class="example">
+<pre class="example">[<var>n</var>]&lt;&gt;<var>word</var>
+</pre></div>
+<p>causes the file whose name is the expansion of <var>word</var>
+to be opened for both reading and writing on file descriptor
+<var>n</var>, or on file descriptor 0 if <var>n</var>
+is not specified.  If the file does not exist, it is created.
+</p>
+<hr>
+<span id="Executing-Commands"></span><div class="header">
+<p>
+Next: <a href="#Shell-Scripts" accesskey="n" rel="next">Shell Scripts</a>, Previous: <a href="#Redirections" accesskey="p" rel="prev">Redirections</a>, Up: <a href="#Basic-Shell-Features" accesskey="u" rel="up">Basic Shell Features</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Executing-Commands-1"></span><h3 class="section">3.7 Executing Commands</h3>
+
+<table class="menu" border="0" cellspacing="0">
+<tr><td align="left" valign="top">&bull; <a href="#Simple-Command-Expansion" accesskey="1">Simple Command Expansion</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How Bash expands simple commands before
+				executing them.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Command-Search-and-Execution" accesskey="2">Command Search and Execution</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How Bash finds commands and runs them.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Command-Execution-Environment" accesskey="3">Command Execution Environment</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">The environment in which Bash
+					executes commands that are not
+					shell builtins.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Environment" accesskey="4">Environment</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">The environment given to a command.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Exit-Status" accesskey="5">Exit Status</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">The status returned by commands and how Bash
+			interprets it.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Signals" accesskey="6">Signals</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">What happens when Bash or a command it runs
+			receives a signal.
+</td></tr>
+</table>
+
+<hr>
+<span id="Simple-Command-Expansion"></span><div class="header">
+<p>
+Next: <a href="#Command-Search-and-Execution" accesskey="n" rel="next">Command Search and Execution</a>, Up: <a href="#Executing-Commands" accesskey="u" rel="up">Executing Commands</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Simple-Command-Expansion-1"></span><h4 class="subsection">3.7.1 Simple Command Expansion</h4>
+<span id="index-command-expansion"></span>
+
+<p>When a simple command is executed, the shell performs the following
+expansions, assignments, and redirections, from left to right, in
+the following order.
+</p>
+<ol>
+<li> The words that the parser has marked as variable assignments (those
+preceding the command name) and redirections are saved for later
+processing.
+
+</li><li> The words that are not variable assignments or redirections are
+expanded (see <a href="#Shell-Expansions">Shell Expansions</a>).
+If any words remain after expansion, the first word
+is taken to be the name of the command and the remaining words are
+the arguments.
+
+</li><li> Redirections are performed as described above (see <a href="#Redirections">Redirections</a>).
+
+</li><li> The text after the &lsquo;<samp>=</samp>&rsquo; in each variable assignment undergoes tilde
+expansion, parameter expansion, command substitution, arithmetic expansion,
+and quote removal before being assigned to the variable.
+</li></ol>
+
+<p>If no command name results, the variable assignments affect the current
+shell environment.  Otherwise, the variables are added to the environment
+of the executed command and do not affect the current shell environment.
+If any of the assignments attempts to assign a value to a readonly variable,
+an error occurs, and the command exits with a non-zero status.
+</p>
+<p>If no command name results, redirections are performed, but do not
+affect the current shell environment.  A redirection error causes the
+command to exit with a non-zero status.
+</p>
+<p>If there is a command name left after expansion, execution proceeds as
+described below.  Otherwise, the command exits.  If one of the expansions
+contained a command substitution, the exit status of the command is
+the exit status of the last command substitution performed.  If there
+were no command substitutions, the command exits with a status of zero.
+</p>
+<hr>
+<span id="Command-Search-and-Execution"></span><div class="header">
+<p>
+Next: <a href="#Command-Execution-Environment" accesskey="n" rel="next">Command Execution Environment</a>, Previous: <a href="#Simple-Command-Expansion" accesskey="p" rel="prev">Simple Command Expansion</a>, Up: <a href="#Executing-Commands" accesskey="u" rel="up">Executing Commands</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Command-Search-and-Execution-1"></span><h4 class="subsection">3.7.2 Command Search and Execution</h4>
+<span id="index-command-execution"></span>
+<span id="index-command-search"></span>
+
+<p>After a command has been split into words, if it results in a
+simple command and an optional list of arguments, the following
+actions are taken.
+</p>
+<ol>
+<li> If the command name contains no slashes, the shell attempts to
+locate it.  If there exists a shell function by that name, that
+function is invoked as described in <a href="#Shell-Functions">Shell Functions</a>.
+
+</li><li> If the name does not match a function, the shell searches for
+it in the list of shell builtins.  If a match is found, that
+builtin is invoked.
+
+</li><li> If the name is neither a shell function nor a builtin,
+and contains no slashes, Bash searches each element of
+<code>$PATH</code> for a directory containing an executable file
+by that name.  Bash uses a hash table to remember the full
+pathnames of executable files to avoid multiple <code>PATH</code> searches
+(see the description of <code>hash</code> in <a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a>).
+A full search of the directories in <code>$PATH</code>
+is performed only if the command is not found in the hash table.
+If the search is unsuccessful, the shell searches for a defined shell
+function named <code>command_not_found_handle</code>.
+If that function exists, it is invoked in a separate execution environment
+with the original command and
+the original command&rsquo;s arguments as its arguments, and the function&rsquo;s
+exit status becomes the exit status of that subshell.
+If that function is not defined, the shell prints an error
+message and returns an exit status of 127.
+
+</li><li> If the search is successful, or if the command name contains
+one or more slashes, the shell executes the named program in
+a separate execution environment.
+Argument 0 is set to the name given, and the remaining arguments
+to the command are set to the arguments supplied, if any.
+
+</li><li> If this execution fails because the file is not in executable
+format, and the file is not a directory, it is assumed to be a
+<var>shell script</var> and the shell executes it as described in
+<a href="#Shell-Scripts">Shell Scripts</a>.
+
+</li><li> If the command was not begun asynchronously, the shell waits for
+the command to complete and collects its exit status.
+
+</li></ol>
+
+<hr>
+<span id="Command-Execution-Environment"></span><div class="header">
+<p>
+Next: <a href="#Environment" accesskey="n" rel="next">Environment</a>, Previous: <a href="#Command-Search-and-Execution" accesskey="p" rel="prev">Command Search and Execution</a>, Up: <a href="#Executing-Commands" accesskey="u" rel="up">Executing Commands</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Command-Execution-Environment-1"></span><h4 class="subsection">3.7.3 Command Execution Environment</h4>
+<span id="index-execution-environment"></span>
+
+<p>The shell has an <var>execution environment</var>, which consists of the
+following:
+</p>
+<ul>
+<li> open files inherited by the shell at invocation, as modified by
+redirections supplied to the <code>exec</code> builtin
+
+</li><li> the current working directory as set by <code>cd</code>, <code>pushd</code>, or
+<code>popd</code>, or inherited by the shell at invocation
+
+</li><li> the file creation mode mask as set by <code>umask</code> or inherited from
+the shell&rsquo;s parent
+
+</li><li> current traps set by <code>trap</code>
+
+</li><li> shell parameters that are set by variable assignment or with <code>set</code>
+or inherited from the shell&rsquo;s parent in the environment
+
+</li><li> shell functions defined during execution or inherited from the shell&rsquo;s
+parent in the environment
+
+</li><li> options enabled at invocation (either by default or with command-line
+arguments) or by <code>set</code>
+
+</li><li> options enabled by <code>shopt</code> (see <a href="#The-Shopt-Builtin">The Shopt Builtin</a>)
+
+</li><li> shell aliases defined with <code>alias</code> (see <a href="#Aliases">Aliases</a>)
+
+</li><li> various process <small>ID</small>s, including those of background jobs
+(see <a href="#Lists">Lists</a>), the value of <code>$$</code>, and the value of
+<code>$PPID</code>
+
+</li></ul>
+
+<p>When a simple command other than a builtin or shell function
+is to be executed, it
+is invoked in a separate execution environment that consists of
+the following.  Unless otherwise noted, the values are inherited
+from the shell.
+</p>
+<ul>
+<li> the shell&rsquo;s open files, plus any modifications and additions specified
+by redirections to the command
+
+</li><li> the current working directory
+
+</li><li> the file creation mode mask
+
+</li><li> shell variables and functions marked for export, along with variables
+exported for the command, passed in the environment (see <a href="#Environment">Environment</a>)
+
+</li><li> traps caught by the shell are reset to the values inherited from the
+shell&rsquo;s parent, and traps ignored by the shell are ignored
+
+</li></ul>
+
+<p>A command invoked in this separate environment cannot affect the
+shell&rsquo;s execution environment.
+</p>
+<p>Command substitution, commands grouped with parentheses,
+and asynchronous commands are invoked in a
+subshell environment that is a duplicate of the shell environment,
+except that traps caught by the shell are reset to the values
+that the shell inherited from its parent at invocation.  Builtin
+commands that are invoked as part of a pipeline are also executed
+in a subshell environment.  Changes made to the subshell environment
+cannot affect the shell&rsquo;s execution environment.
+</p>
+<p>Subshells spawned to execute command substitutions inherit the value of
+the <samp>-e</samp> option from the parent shell.  When not in <small>POSIX</small> mode,
+Bash clears the <samp>-e</samp> option in such subshells.
+</p>
+<p>If a command is followed by a &lsquo;<samp>&amp;</samp>&rsquo; and job control is not active, the
+default standard input for the command is the empty file <samp>/dev/null</samp>.
+Otherwise, the invoked command inherits the file descriptors of the calling
+shell as modified by redirections.
+</p>
+<hr>
+<span id="Environment"></span><div class="header">
+<p>
+Next: <a href="#Exit-Status" accesskey="n" rel="next">Exit Status</a>, Previous: <a href="#Command-Execution-Environment" accesskey="p" rel="prev">Command Execution Environment</a>, Up: <a href="#Executing-Commands" accesskey="u" rel="up">Executing Commands</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Environment-1"></span><h4 class="subsection">3.7.4 Environment</h4>
+<span id="index-environment"></span>
+
+<p>When a program is invoked it is given an array of strings
+called the <var>environment</var>.
+This is a list of name-value pairs, of the form <code>name=value</code>.
+</p>
+<p>Bash provides several ways to manipulate the environment.
+On invocation, the shell scans its own environment and
+creates a parameter for each name found, automatically marking
+it for <var>export</var>
+to child processes.  Executed commands inherit the environment.
+The <code>export</code> and &lsquo;<samp>declare -x</samp>&rsquo;
+commands allow parameters and functions to be added to and
+deleted from the environment.  If the value of a parameter
+in the environment is modified, the new value becomes part
+of the environment, replacing the old.  The environment
+inherited by any executed command consists of the shell&rsquo;s
+initial environment, whose values may be modified in the shell,
+less any pairs removed by the <code>unset</code> and &lsquo;<samp>export -n</samp>&rsquo;
+commands, plus any additions via the <code>export</code> and
+&lsquo;<samp>declare -x</samp>&rsquo; commands.
+</p>
+<p>The environment for any simple command
+or function may be augmented temporarily by prefixing it with
+parameter assignments, as described in <a href="#Shell-Parameters">Shell Parameters</a>.
+These assignment statements affect only the environment seen
+by that command.
+</p>
+<p>If the <samp>-k</samp> option is set (see <a href="#The-Set-Builtin">The Set Builtin</a>), then all
+parameter assignments are placed in the environment for a command,
+not just those that precede the command name.
+</p>
+<p>When Bash invokes an external command, the variable &lsquo;<samp>$_</samp>&rsquo;
+is set to the full pathname of the command and passed to that
+command in its environment.
+</p>
+<hr>
+<span id="Exit-Status"></span><div class="header">
+<p>
+Next: <a href="#Signals" accesskey="n" rel="next">Signals</a>, Previous: <a href="#Environment" accesskey="p" rel="prev">Environment</a>, Up: <a href="#Executing-Commands" accesskey="u" rel="up">Executing Commands</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Exit-Status-1"></span><h4 class="subsection">3.7.5 Exit Status</h4>
+<span id="index-exit-status-1"></span>
+
+<p>The exit status of an executed command is the value returned by the
+<var>waitpid</var> system call or equivalent function.  Exit statuses    
+fall between 0 and 255, though, as explained below, the shell may
+use values above 125 specially.  Exit statuses from shell builtins and
+compound commands are also limited to this range.  Under certain
+circumstances, the shell will use special values to indicate specific
+failure modes.
+</p>
+<p>For the shell&rsquo;s purposes, a command which exits with a
+zero exit status has succeeded.
+A non-zero exit status indicates failure.
+This seemingly counter-intuitive scheme is used so there
+is one well-defined way to indicate success and a variety of
+ways to indicate various failure modes.
+When a command terminates on a fatal signal whose number is <var>N</var>,
+Bash uses the value 128+<var>N</var> as the exit status.
+</p>
+<p>If a command is not found, the child process created to
+execute it returns a status of 127.  If a command is found  
+but is not executable, the return status is 126.
+</p>
+<p>If a command fails because of an error during expansion or redirection,
+the exit status is greater than zero.
+</p>
+<p>The exit status is used by the Bash conditional commands
+(see <a href="#Conditional-Constructs">Conditional Constructs</a>) and some of the list
+constructs (see <a href="#Lists">Lists</a>).
+</p>
+<p>All of the Bash builtins return an exit status of zero if they succeed
+and a non-zero status on failure, so they may be used by the
+conditional and list constructs.
+All builtins return an exit status of 2 to indicate incorrect usage,
+generally invalid options or missing arguments.
+</p>
+<hr>
+<span id="Signals"></span><div class="header">
+<p>
+Previous: <a href="#Exit-Status" accesskey="p" rel="prev">Exit Status</a>, Up: <a href="#Executing-Commands" accesskey="u" rel="up">Executing Commands</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Signals-1"></span><h4 class="subsection">3.7.6 Signals</h4>
+<span id="index-signal-handling"></span>
+
+<p>When Bash is interactive, in the absence of any traps, it ignores
+<code>SIGTERM</code> (so that &lsquo;<samp>kill 0</samp>&rsquo; does not kill an interactive shell),
+and <code>SIGINT</code>
+is caught and handled (so that the <code>wait</code> builtin is interruptible).
+When Bash receives a <code>SIGINT</code>, it breaks out of any executing loops.
+In all cases, Bash ignores <code>SIGQUIT</code>.
+If job control is in effect (see <a href="#Job-Control">Job Control</a>), Bash
+ignores <code>SIGTTIN</code>, <code>SIGTTOU</code>, and <code>SIGTSTP</code>.
+</p>
+<p>Non-builtin commands started by Bash have signal handlers set to the
+values inherited by the shell from its parent.
+When job control is not in effect, asynchronous commands
+ignore <code>SIGINT</code> and <code>SIGQUIT</code> in addition to these inherited
+handlers.
+Commands run as a result of
+command substitution ignore the keyboard-generated job control signals
+<code>SIGTTIN</code>, <code>SIGTTOU</code>, and <code>SIGTSTP</code>.
+</p>
+<p>The shell exits by default upon receipt of a <code>SIGHUP</code>.
+Before exiting, an interactive shell resends the <code>SIGHUP</code> to
+all jobs, running or stopped.
+Stopped jobs are sent <code>SIGCONT</code> to ensure that they receive
+the <code>SIGHUP</code>.
+To prevent the shell from sending the <code>SIGHUP</code> signal to a
+particular job, it should be removed
+from the jobs table with the <code>disown</code>
+builtin (see <a href="#Job-Control-Builtins">Job Control Builtins</a>) or marked
+to not receive <code>SIGHUP</code> using <code>disown -h</code>.
+</p>
+<p>If the  <code>huponexit</code> shell option has been set with <code>shopt</code>
+(see <a href="#The-Shopt-Builtin">The Shopt Builtin</a>), Bash sends a <code>SIGHUP</code> to all jobs when
+an interactive login shell exits.
+</p>
+<p>If Bash is waiting for a command to complete and receives a signal
+for which a trap has been set, the trap will not be executed until
+the command completes.
+When Bash is waiting for an asynchronous
+command via the <code>wait</code> builtin, the reception of a signal for
+which a trap has been set will cause the <code>wait</code> builtin to return
+immediately with an exit status greater than 128, immediately after
+which the trap is executed.
+</p>
+<hr>
+<span id="Shell-Scripts"></span><div class="header">
+<p>
+Previous: <a href="#Executing-Commands" accesskey="p" rel="prev">Executing Commands</a>, Up: <a href="#Basic-Shell-Features" accesskey="u" rel="up">Basic Shell Features</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Shell-Scripts-1"></span><h3 class="section">3.8 Shell Scripts</h3>
+<span id="index-shell-script"></span>
+
+<p>A shell script is a text file containing shell commands.  When such
+a file is used as the first non-option argument when invoking Bash,
+and neither the <samp>-c</samp> nor <samp>-s</samp> option is supplied
+(see <a href="#Invoking-Bash">Invoking Bash</a>), 
+Bash reads and executes commands from the file, then exits.  This
+mode of operation creates a non-interactive shell.  The shell first
+searches for the file in the current directory, and looks in the
+directories in <code>$PATH</code> if not found there.
+</p>
+<p>When Bash runs
+a shell script, it sets the special parameter <code>0</code> to the name
+of the file, rather than the name of the shell, and the positional
+parameters are set to the remaining arguments, if any are given.
+If no additional arguments are supplied, the positional parameters
+are unset.
+</p>
+<p>A shell script may be made executable by using the <code>chmod</code> command
+to turn on the execute bit.  When Bash finds such a file while
+searching the <code>$PATH</code> for a command, it spawns a subshell to
+execute it.  In other words, executing
+</p><div class="example">
+<pre class="example">filename <var>arguments</var>
+</pre></div>
+<p>is equivalent to executing
+</p><div class="example">
+<pre class="example">bash filename <var>arguments</var>
+</pre></div>
+
+<p>if <code>filename</code> is an executable shell script.
+This subshell reinitializes itself, so that the effect is as if a
+new shell had been invoked to interpret the script, with the
+exception that the locations of commands remembered by the parent
+(see the description of <code>hash</code> in <a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a>)
+are retained by the child.
+</p>
+<p>Most versions of Unix make this a part of the operating system&rsquo;s command
+execution mechanism.  If the first line of a script begins with
+the two characters &lsquo;<samp>#!</samp>&rsquo;, the remainder of the line specifies
+an interpreter for the program and, depending on the operating system, one
+or more optional arguments for that interpreter.
+Thus, you can specify Bash, <code>awk</code>, Perl, or some other
+interpreter and write the rest of the script file in that language.
+</p>
+<p>The arguments to the interpreter
+consist of one or more optional arguments following the interpreter
+name on the first line of the script file, followed by the name of
+the script file, followed by the rest of the arguments supplied to the
+script.
+The details of how the interpreter line is split into an interpreter name
+and a set of arguments vary across systems.
+Bash will perform this action on operating systems that do not handle it
+themselves.
+Note that some older versions of Unix limit the interpreter
+name and a single argument to a maximum of 32 characters, so it&rsquo;s not
+portable to assume that using more than one argument will work.
+</p>
+<p>Bash scripts often begin with <code>#! /bin/bash</code> (assuming that
+Bash has been installed in <samp>/bin</samp>), since this ensures that
+Bash will be used to interpret the script, even if it is executed
+under another shell. It&rsquo;s a common idiom to use <code>env</code> to find
+<code>bash</code> even if it&rsquo;s been installed in another directory:
+<code>#!/usr/bin/env bash</code> will find the first occurrence of <code>bash</code>
+in <code>$PATH</code>.
+</p>
+<hr>
+<span id="Shell-Builtin-Commands"></span><div class="header">
+<p>
+Next: <a href="#Shell-Variables" accesskey="n" rel="next">Shell Variables</a>, Previous: <a href="#Basic-Shell-Features" accesskey="p" rel="prev">Basic Shell Features</a>, Up: <a href="#Top" accesskey="u" rel="up">Top</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Shell-Builtin-Commands-1"></span><h2 class="chapter">4 Shell Builtin Commands</h2>
+
+<table class="menu" border="0" cellspacing="0">
+<tr><td align="left" valign="top">&bull; <a href="#Bourne-Shell-Builtins" accesskey="1">Bourne Shell Builtins</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Builtin commands inherited from the Bourne
+				Shell.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Bash-Builtins" accesskey="2">Bash Builtins</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Table of builtins specific to Bash.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Modifying-Shell-Behavior" accesskey="3">Modifying Shell Behavior</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Builtins to modify shell attributes and
+				optional behavior.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Special-Builtins" accesskey="4">Special Builtins</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Builtin commands classified specially by
+				POSIX.
+</td></tr>
+</table>
+
+<p>Builtin commands are contained within the shell itself.
+When the name of a builtin command is used as the first word of
+a simple command (see <a href="#Simple-Commands">Simple Commands</a>), the shell executes
+the command directly, without invoking another program.
+Builtin commands are necessary to implement functionality impossible
+or inconvenient to obtain with separate utilities.
+</p>
+<p>This section briefly describes the builtins which Bash inherits from
+the Bourne Shell, as well as the builtin commands which are unique
+to or have been extended in Bash.
+</p>
+<p>Several builtin commands are described in other chapters: builtin
+commands which provide the Bash interface to the job control
+facilities (see <a href="#Job-Control-Builtins">Job Control Builtins</a>), the directory stack
+(see <a href="#Directory-Stack-Builtins">Directory Stack Builtins</a>), the command history
+(see <a href="#Bash-History-Builtins">Bash History Builtins</a>), and the programmable completion
+facilities (see <a href="#Programmable-Completion-Builtins">Programmable Completion Builtins</a>).
+</p>
+<p>Many of the builtins have been extended by <small>POSIX</small> or Bash.
+</p>
+<p>Unless otherwise noted, each builtin command documented as accepting
+options preceded by &lsquo;<samp>-</samp>&rsquo; accepts &lsquo;<samp>--</samp>&rsquo;
+to signify the end of the options.
+The <code>:</code>, <code>true</code>, <code>false</code>, and <code>test</code>/<code>[</code>
+builtins do not accept options and do not treat &lsquo;<samp>--</samp>&rsquo; specially.
+The <code>exit</code>, <code>logout</code>, <code>return</code>,
+<code>break</code>, <code>continue</code>, <code>let</code>,
+and <code>shift</code> builtins accept and process arguments beginning
+with &lsquo;<samp>-</samp>&rsquo; without requiring &lsquo;<samp>--</samp>&rsquo;.
+Other builtins that accept arguments but are not specified as accepting
+options interpret arguments beginning with &lsquo;<samp>-</samp>&rsquo; as invalid options and
+require &lsquo;<samp>--</samp>&rsquo; to prevent this interpretation.
+</p>
+<hr>
+<span id="Bourne-Shell-Builtins"></span><div class="header">
+<p>
+Next: <a href="#Bash-Builtins" accesskey="n" rel="next">Bash Builtins</a>, Up: <a href="#Shell-Builtin-Commands" accesskey="u" rel="up">Shell Builtin Commands</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Bourne-Shell-Builtins-1"></span><h3 class="section">4.1 Bourne Shell Builtins</h3>
+
+<p>The following shell builtin commands are inherited from the Bourne Shell.
+These commands are implemented as specified by the <small>POSIX</small> standard.
+</p>
+<dl compact="compact">
+<dt><code>:    <span class="roman">(a colon)</span></code></dt>
+<dd><span id="index-_003a"></span>
+<div class="example">
+<pre class="example">: [<var>arguments</var>]
+</pre></div>
+
+<p>Do nothing beyond expanding <var>arguments</var> and performing redirections.
+The return status is zero.
+</p>
+</dd>
+<dt><code>.    <span class="roman">(a period)</span></code></dt>
+<dd><span id="index-_002e"></span>
+<div class="example">
+<pre class="example">. <var>filename</var> [<var>arguments</var>]
+</pre></div>
+
+<p>Read and execute commands from the <var>filename</var> argument in the
+current shell context.  If <var>filename</var> does not contain a slash,
+the <code>PATH</code> variable is used to find <var>filename</var>.
+When Bash is not in <small>POSIX</small> mode, the current directory is searched
+if <var>filename</var> is not found in <code>$PATH</code>.
+If any <var>arguments</var> are supplied, they become the positional
+parameters when <var>filename</var> is executed.  Otherwise the positional
+parameters are unchanged.
+If the <samp>-T</samp> option is enabled, <code>source</code> inherits any trap on
+<code>DEBUG</code>; if it is not, any <code>DEBUG</code> trap string is saved and
+restored around the call to <code>source</code>, and <code>source</code> unsets the
+<code>DEBUG</code> trap while it executes.
+If <samp>-T</samp> is not set, and the sourced file changes
+the <code>DEBUG</code> trap, the new value is retained when <code>source</code> completes.
+The return status is the exit status of the last command executed, or
+zero if no commands are executed.  If <var>filename</var> is not found, or
+cannot be read, the return status is non-zero.
+This builtin is equivalent to <code>source</code>.
+</p>
+</dd>
+<dt><code>break</code></dt>
+<dd><span id="index-break"></span>
+<div class="example">
+<pre class="example">break [<var>n</var>]
+</pre></div>
+
+<p>Exit from a <code>for</code>, <code>while</code>, <code>until</code>, or <code>select</code> loop.
+If <var>n</var> is supplied, the <var>n</var>th enclosing loop is exited.
+<var>n</var> must be greater than or equal to 1.
+The return status is zero unless <var>n</var> is not greater than or equal to 1.
+</p>
+</dd>
+<dt><code>cd</code></dt>
+<dd><span id="index-cd"></span>
+<div class="example">
+<pre class="example">cd [-L|[-P [-e]] [-@] [<var>directory</var>]
+</pre></div>
+
+<p>Change the current working directory to <var>directory</var>.
+If <var>directory</var> is not supplied, the value of the <code>HOME</code>
+shell variable is used.
+Any additional arguments following <var>directory</var> are ignored.
+If the shell variable
+<code>CDPATH</code> exists, it is used as a search path:
+each directory name in <code>CDPATH</code> is searched for
+<var>directory</var>, with alternative directory names in <code>CDPATH</code>
+separated by a colon (&lsquo;<samp>:</samp>&rsquo;).
+If <var>directory</var> begins with a slash, <code>CDPATH</code> is not used.
+</p>
+<p>The <samp>-P</samp> option means to not follow symbolic links: symbolic links
+are resolved while <code>cd</code> is traversing <var>directory</var> and before
+processing an instance of &lsquo;<samp>..</samp>&rsquo; in <var>directory</var>.
+</p>
+<p>By default, or when the <samp>-L</samp> option is supplied, symbolic links
+in <var>directory</var> are resolved after <code>cd</code> processes an instance
+of &lsquo;<samp>..</samp>&rsquo; in <var>directory</var>.
+</p>
+<p>If &lsquo;<samp>..</samp>&rsquo; appears in <var>directory</var>, it is processed by removing the
+immediately preceding pathname component, back to a slash or the beginning
+of <var>directory</var>.
+</p>
+<p>If the <samp>-e</samp> option is supplied with <samp>-P</samp>
+and the current working directory cannot be successfully determined
+after a successful directory change, <code>cd</code> will return an unsuccessful
+status.
+</p>
+<p>On systems that support it, the <samp>-@</samp> option presents the extended
+attributes associated with a file as a directory.              
+</p>
+<p>If <var>directory</var> is &lsquo;<samp>-</samp>&rsquo;, it is converted to <code>$OLDPWD</code>
+before the directory change is attempted.
+</p>
+<p>If a non-empty directory name from <code>CDPATH</code> is used, or if
+&lsquo;<samp>-</samp>&rsquo; is the first argument, and the directory change is
+successful, the absolute pathname of the new working directory is
+written to the standard output.
+</p>
+<p>The return status is zero if the directory is successfully changed,
+non-zero otherwise.
+</p>
+</dd>
+<dt><code>continue</code></dt>
+<dd><span id="index-continue"></span>
+<div class="example">
+<pre class="example">continue [<var>n</var>]
+</pre></div>
+
+<p>Resume the next iteration of an enclosing <code>for</code>, <code>while</code>,
+<code>until</code>, or <code>select</code> loop.
+If <var>n</var> is supplied, the execution of the <var>n</var>th enclosing loop
+is resumed.
+<var>n</var> must be greater than or equal to 1.
+The return status is zero unless <var>n</var> is not greater than or equal to 1.
+</p>
+</dd>
+<dt><code>eval</code></dt>
+<dd><span id="index-eval"></span>
+<div class="example">
+<pre class="example">eval [<var>arguments</var>]
+</pre></div>
+
+<p>The arguments are concatenated together into a single command, which is
+then read and executed, and its exit status returned as the exit status
+of <code>eval</code>.
+If there are no arguments or only empty arguments, the return status is
+zero.
+</p>
+</dd>
+<dt><code>exec</code></dt>
+<dd><span id="index-exec"></span>
+<div class="example">
+<pre class="example">exec [-cl] [-a <var>name</var>] [<var>command</var> [<var>arguments</var>]]
+</pre></div>
+
+<p>If <var>command</var>
+is supplied, it replaces the shell without creating a new process.
+If the <samp>-l</samp> option is supplied, the shell places a dash at the
+beginning of the zeroth argument passed to <var>command</var>.
+This is what the <code>login</code> program does.
+The <samp>-c</samp> option causes <var>command</var> to be executed with an empty
+environment.
+If <samp>-a</samp> is supplied, the shell passes <var>name</var> as the zeroth
+argument to <var>command</var>.
+If <var>command</var>
+cannot be executed for some reason, a non-interactive shell exits,
+unless the <code>execfail</code> shell option
+is enabled.  In that case, it returns failure.
+An interactive shell returns failure if the file cannot be executed.
+A subshell exits unconditionally if <code>exec</code> fails.
+If no <var>command</var> is specified, redirections may be used to affect
+the current shell environment.  If there are no redirection errors, the
+return status is zero; otherwise the return status is non-zero.
+</p>
+</dd>
+<dt><code>exit</code></dt>
+<dd><span id="index-exit"></span>
+<div class="example">
+<pre class="example">exit [<var>n</var>]
+</pre></div>
+
+<p>Exit the shell, returning a status of <var>n</var> to the shell&rsquo;s parent.
+If <var>n</var> is omitted, the exit status is that of the last command executed.
+Any trap on <code>EXIT</code> is executed before the shell terminates.
+</p>
+</dd>
+<dt><code>export</code></dt>
+<dd><span id="index-export"></span>
+<div class="example">
+<pre class="example">export [-fn] [-p] [<var>name</var>[=<var>value</var>]]
+</pre></div>
+
+<p>Mark each <var>name</var> to be passed to child processes
+in the environment.  If the <samp>-f</samp> option is supplied, the <var>name</var>s
+refer to shell functions; otherwise the names refer to shell variables.
+The <samp>-n</samp> option means to no longer mark each <var>name</var> for export.
+If no <var>names</var> are supplied, or if the <samp>-p</samp> option is given, a
+list of names of all exported variables is displayed.
+The <samp>-p</samp> option displays output in a form that may be reused as input.
+If a variable name is followed by =<var>value</var>, the value of
+the variable is set to <var>value</var>.
+</p>
+<p>The return status is zero unless an invalid option is supplied, one of
+the names is not a valid shell variable name, or <samp>-f</samp> is supplied
+with a name that is not a shell function.
+</p>
+</dd>
+<dt><code>getopts</code></dt>
+<dd><span id="index-getopts"></span>
+<div class="example">
+<pre class="example">getopts <var>optstring</var> <var>name</var> [<var>arg</var> &hellip;]
+</pre></div>
+
+<p><code>getopts</code> is used by shell scripts to parse positional parameters.
+<var>optstring</var> contains the option characters to be recognized; if a
+character is followed by a colon, the option is expected to have an
+argument, which should be separated from it by whitespace.
+The colon (&lsquo;<samp>:</samp>&rsquo;) and question mark (&lsquo;<samp>?</samp>&rsquo;) may not be
+used as option characters.
+Each time it is invoked, <code>getopts</code>
+places the next option in the shell variable <var>name</var>, initializing
+<var>name</var> if it does not exist,
+and the index of the next argument to be processed into the
+variable <code>OPTIND</code>.
+<code>OPTIND</code> is initialized to 1 each time the shell or a shell script
+is invoked.
+When an option requires an argument,
+<code>getopts</code> places that argument into the variable <code>OPTARG</code>.
+The shell does not reset <code>OPTIND</code> automatically; it must be manually
+reset between multiple calls to <code>getopts</code> within the same shell
+invocation if a new set of parameters is to be used.
+</p>
+<p>When the end of options is encountered, <code>getopts</code> exits with a
+return value greater than zero.
+<code>OPTIND</code> is set to the index of the first non-option argument,
+and <var>name</var> is set to &lsquo;<samp>?</samp>&rsquo;.
+</p>
+<p><code>getopts</code>
+normally parses the positional parameters, but if more arguments are
+supplied as <var>arg</var> values, <code>getopts</code> parses those instead.
+</p>
+<p><code>getopts</code> can report errors in two ways.  If the first character of
+<var>optstring</var> is a colon, <var>silent</var>
+error reporting is used.  In normal operation, diagnostic messages
+are printed when invalid options or missing option arguments are
+encountered.
+If the variable <code>OPTERR</code>
+is set to 0, no error messages will be displayed, even if the first
+character of <code>optstring</code> is not a colon.
+</p>
+<p>If an invalid option is seen,
+<code>getopts</code> places &lsquo;<samp>?</samp>&rsquo; into <var>name</var> and, if not silent,
+prints an error message and unsets <code>OPTARG</code>.
+If <code>getopts</code> is silent, the option character found is placed in
+<code>OPTARG</code> and no diagnostic message is printed.
+</p>
+<p>If a required argument is not found, and <code>getopts</code>
+is not silent, a question mark (&lsquo;<samp>?</samp>&rsquo;) is placed in <var>name</var>,
+<code>OPTARG</code> is unset, and a diagnostic message is printed.
+If <code>getopts</code> is silent, then a colon (&lsquo;<samp>:</samp>&rsquo;) is placed in
+<var>name</var> and <code>OPTARG</code> is set to the option character found.
+</p>
+</dd>
+<dt><code>hash</code></dt>
+<dd><span id="index-hash"></span>
+<div class="example">
+<pre class="example">hash [-r] [-p <var>filename</var>] [-dt] [<var>name</var>]
+</pre></div>
+
+<p>Each time <code>hash</code> is invoked, it remembers the full pathnames of the
+commands specified as <var>name</var> arguments,
+so they need not be searched for on subsequent invocations.
+The commands are found by searching through the directories listed in
+<code>$PATH</code>.
+Any previously-remembered pathname is discarded.
+The <samp>-p</samp> option inhibits the path search, and <var>filename</var> is
+used as the location of <var>name</var>.
+The <samp>-r</samp> option causes the shell to forget all remembered locations.
+The <samp>-d</samp> option causes the shell to forget the remembered location
+of each <var>name</var>.
+If the <samp>-t</samp> option is supplied, the full pathname to which each
+<var>name</var> corresponds is printed.  If multiple <var>name</var> arguments are
+supplied with <samp>-t</samp>, the <var>name</var> is printed before the hashed
+full pathname.
+The <samp>-l</samp> option causes output to be displayed in a format
+that may be reused as input.
+If no arguments are given, or if only <samp>-l</samp> is supplied,
+information about remembered commands is printed.
+The return status is zero unless a <var>name</var> is not found or an invalid
+option is supplied.
+</p>
+</dd>
+<dt><code>pwd</code></dt>
+<dd><span id="index-pwd"></span>
+<div class="example">
+<pre class="example">pwd [-LP]
+</pre></div>
+
+<p>Print the absolute pathname of the current working directory.
+If the <samp>-P</samp> option is supplied, the pathname printed will not
+contain symbolic links.
+If the <samp>-L</samp> option is supplied, the pathname printed may contain
+symbolic links.
+The return status is zero unless an error is encountered while
+determining the name of the current directory or an invalid option
+is supplied.
+</p>
+</dd>
+<dt><code>readonly</code></dt>
+<dd><span id="index-readonly"></span>
+<div class="example">
+<pre class="example">readonly [-aAf] [-p] [<var>name</var>[=<var>value</var>]] &hellip;
+</pre></div>
+
+<p>Mark each <var>name</var> as readonly.
+The values of these names may not be changed by subsequent assignment.
+If the <samp>-f</samp> option is supplied, each <var>name</var> refers to a shell
+function.
+The <samp>-a</samp> option means each <var>name</var> refers to an indexed
+array variable; the <samp>-A</samp> option means each <var>name</var> refers
+to an associative array variable.
+If both options are supplied, <samp>-A</samp> takes precedence.
+If no <var>name</var> arguments are given, or if the <samp>-p</samp>
+option is supplied, a list of all readonly names is printed.
+The other options may be used to restrict the output to a subset of
+the set of readonly names.
+The <samp>-p</samp> option causes output to be displayed in a format that
+may be reused as input.
+If a variable name is followed by =<var>value</var>, the value of
+the variable is set to <var>value</var>.
+The return status is zero unless an invalid option is supplied, one of
+the <var>name</var> arguments is not a valid shell variable or function name,
+or the <samp>-f</samp> option is supplied with a name that is not a shell function.
+</p>
+</dd>
+<dt><code>return</code></dt>
+<dd><span id="index-return"></span>
+<div class="example">
+<pre class="example">return [<var>n</var>]
+</pre></div>
+
+<p>Cause a shell function to stop executing and return the value <var>n</var>
+to its caller.
+If <var>n</var> is not supplied, the return value is the exit status of the
+last command executed in the function.
+If <code>return</code> is executed by a trap handler, the last command used to
+determine the status is the last command executed before the trap handler.
+If <code>return</code> is executed during a <code>DEBUG</code> trap, the last command
+used to determine the status is the last command executed by the trap
+handler before <code>return</code> was invoked.
+<code>return</code> may also be used to terminate execution of a script
+being executed with the <code>.</code> (<code>source</code>) builtin,
+returning either <var>n</var> or
+the exit status of the last command executed within the script as the exit
+status of the script.
+If <var>n</var> is supplied, the return value is its least significant
+8 bits.
+Any command associated with the <code>RETURN</code> trap is executed
+before execution resumes after the function or script.
+The return status is non-zero if <code>return</code> is supplied a non-numeric
+argument or is used outside a function
+and not during the execution of a script by <code>.</code> or <code>source</code>.
+</p>
+</dd>
+<dt><code>shift</code></dt>
+<dd><span id="index-shift"></span>
+<div class="example">
+<pre class="example">shift [<var>n</var>]
+</pre></div>
+
+<p>Shift the positional parameters to the left by <var>n</var>.
+The positional parameters from <var>n</var>+1 &hellip; <code>$#</code> are
+renamed to <code>$1</code> &hellip; <code>$#</code>-<var>n</var>.
+Parameters represented by the numbers <code>$#</code> down to <code>$#</code>-<var>n</var>+1
+are unset.
+<var>n</var> must be a non-negative number less than or equal to <code>$#</code>.
+If <var>n</var> is zero or greater than <code>$#</code>, the positional parameters
+are not changed.
+If <var>n</var> is not supplied, it is assumed to be 1.
+The return status is zero unless <var>n</var> is greater than <code>$#</code> or
+less than zero, non-zero otherwise.
+</p>
+</dd>
+<dt><code>test</code></dt>
+<dt><code>[</code></dt>
+<dd><span id="index-test"></span>
+<span id="index-_005b"></span>
+<div class="example">
+<pre class="example">test <var>expr</var>
+</pre></div>
+
+<p>Evaluate a conditional expression <var>expr</var> and return a status of 0
+(true) or 1 (false).
+Each operator and operand must be a separate argument.
+Expressions are composed of the primaries described below in
+<a href="#Bash-Conditional-Expressions">Bash Conditional Expressions</a>.
+<code>test</code> does not accept any options, nor does it accept and ignore
+an argument of <samp>--</samp> as signifying the end of options.
+</p>
+<p>When the <code>[</code> form is used, the last argument to the command must
+be a <code>]</code>.
+</p>
+<p>Expressions may be combined using the following operators, listed in
+decreasing order of precedence.
+The evaluation depends on the number of arguments; see below.
+Operator precedence is used when there are five or more arguments.
+</p>
+<dl compact="compact">
+<dt><code>! <var>expr</var></code></dt>
+<dd><p>True if <var>expr</var> is false.
+</p>
+</dd>
+<dt><code>( <var>expr</var> )</code></dt>
+<dd><p>Returns the value of <var>expr</var>.
+This may be used to override the normal precedence of operators.
+</p>
+</dd>
+<dt><code><var>expr1</var> -a <var>expr2</var></code></dt>
+<dd><p>True if both <var>expr1</var> and <var>expr2</var> are true.
+</p>
+</dd>
+<dt><code><var>expr1</var> -o <var>expr2</var></code></dt>
+<dd><p>True if either <var>expr1</var> or <var>expr2</var> is true.
+</p></dd>
+</dl>
+
+<p>The <code>test</code> and <code>[</code> builtins evaluate conditional
+expressions using a set of rules based on the number of arguments.
+</p>
+<dl compact="compact">
+<dt>0 arguments</dt>
+<dd><p>The expression is false.
+</p>
+</dd>
+<dt>1 argument</dt>
+<dd><p>The expression is true if, and only if, the argument is not null.
+</p>
+</dd>
+<dt>2 arguments</dt>
+<dd><p>If the first argument is &lsquo;<samp>!</samp>&rsquo;, the expression is true if and
+only if the second argument is null.
+If the first argument is one of the unary conditional operators
+(see <a href="#Bash-Conditional-Expressions">Bash Conditional Expressions</a>), the expression
+is true if the unary test is true.
+If the first argument is not a valid unary operator, the expression is
+false.
+</p>
+</dd>
+<dt>3 arguments</dt>
+<dd><p>The following conditions are applied in the order listed.
+</p>
+<ol>
+<li> If the second argument is one of the binary conditional
+operators (see <a href="#Bash-Conditional-Expressions">Bash Conditional Expressions</a>), the
+result of the expression is the result of the binary test using the
+first and third arguments as operands.
+The &lsquo;<samp>-a</samp>&rsquo; and &lsquo;<samp>-o</samp>&rsquo; operators are considered binary operators
+when there are three arguments.
+</li><li> If the first argument is &lsquo;<samp>!</samp>&rsquo;, the value is the negation of
+the two-argument test using the second and third arguments.
+</li><li> If the first argument is exactly &lsquo;<samp>(</samp>&rsquo; and the third argument is
+exactly &lsquo;<samp>)</samp>&rsquo;, the result is the one-argument test of the second
+argument.
+</li><li> Otherwise, the expression is false.
+</li></ol>
+
+</dd>
+<dt>4 arguments</dt>
+<dd><p>If the first argument is &lsquo;<samp>!</samp>&rsquo;, the result is the negation of
+the three-argument expression composed of the remaining arguments.
+Otherwise, the expression is parsed and evaluated according to
+precedence using the rules listed above.
+</p>
+</dd>
+<dt>5 or more arguments</dt>
+<dd><p>The expression is parsed and evaluated according to precedence
+using the rules listed above.
+</p></dd>
+</dl>
+
+<p>When used with <code>test</code> or &lsquo;<samp>[</samp>&rsquo;, the &lsquo;<samp>&lt;</samp>&rsquo; and &lsquo;<samp>&gt;</samp>&rsquo;
+operators sort lexicographically using ASCII ordering.
+</p>
+</dd>
+<dt><code>times</code></dt>
+<dd><span id="index-times"></span>
+<div class="example">
+<pre class="example">times
+</pre></div>
+
+<p>Print out the user and system times used by the shell and its children.
+The return status is zero.
+</p>
+</dd>
+<dt><code>trap</code></dt>
+<dd><span id="index-trap"></span>
+<div class="example">
+<pre class="example">trap [-lp] [<var>arg</var>] [<var>sigspec</var> &hellip;]
+</pre></div>
+
+<p>The commands in <var>arg</var> are to be read and executed when the
+shell receives signal <var>sigspec</var>.  If <var>arg</var> is absent (and
+there is a single <var>sigspec</var>) or
+equal to &lsquo;<samp>-</samp>&rsquo;, each specified signal&rsquo;s disposition is reset
+to the value it had when the shell was started.
+If <var>arg</var> is the null string, then the signal specified by
+each <var>sigspec</var> is ignored by the shell and commands it invokes.
+If <var>arg</var> is not present and <samp>-p</samp> has been supplied,
+the shell displays the trap commands associated with each <var>sigspec</var>.
+If no arguments are supplied, or
+only <samp>-p</samp> is given, <code>trap</code> prints the list of commands
+associated with each signal number in a form that may be reused as
+shell input.
+The <samp>-l</samp> option causes the shell to print a list of signal names
+and their corresponding numbers.
+Each <var>sigspec</var> is either a signal name or a signal number.
+Signal names are case insensitive and the <code>SIG</code> prefix is optional.
+</p>
+<p>If a <var>sigspec</var>
+is <code>0</code> or <code>EXIT</code>, <var>arg</var> is executed when the shell exits.
+If a <var>sigspec</var> is <code>DEBUG</code>, the command <var>arg</var> is executed
+before every simple command, <code>for</code> command, <code>case</code> command,
+<code>select</code> command, every arithmetic <code>for</code> command, and before
+the first command executes in a shell function.
+Refer to the description of the <code>extdebug</code> option to the
+<code>shopt</code> builtin (see <a href="#The-Shopt-Builtin">The Shopt Builtin</a>) for details of its
+effect on the <code>DEBUG</code> trap.
+If a <var>sigspec</var> is <code>RETURN</code>, the command <var>arg</var> is executed
+each time a shell function or a script executed with the <code>.</code> or
+<code>source</code> builtins finishes executing.
+</p>
+<p>If a <var>sigspec</var> is <code>ERR</code>, the command <var>arg</var> 
+is executed whenever
+a pipeline (which may consist of a single simple
+command), a list, or a compound command returns a
+non-zero exit status,
+subject to the following conditions.
+The <code>ERR</code> trap is not executed if the failed command is part of the
+command list immediately following an <code>until</code> or <code>while</code> keyword,
+part of the test following the <code>if</code> or <code>elif</code> reserved words,
+part of a command executed in a <code>&amp;&amp;</code> or <code>||</code> list
+except the command following the final <code>&amp;&amp;</code> or <code>||</code>,
+any command in a pipeline but the last,
+or if the command&rsquo;s return
+status is being inverted using <code>!</code>.
+These are the same conditions obeyed by the <code>errexit</code> (<samp>-e</samp>)
+option.
+</p>
+<p>Signals ignored upon entry to the shell cannot be trapped or reset.
+Trapped signals that are not being ignored are reset to their original
+values in a subshell or subshell environment when one is created.
+</p>
+<p>The return status is zero unless a <var>sigspec</var> does not specify a
+valid signal.
+</p>
+</dd>
+<dt><code>umask</code></dt>
+<dd><span id="index-umask"></span>
+<div class="example">
+<pre class="example">umask [-p] [-S] [<var>mode</var>]
+</pre></div>
+
+<p>Set the shell process&rsquo;s file creation mask to <var>mode</var>.  If
+<var>mode</var> begins with a digit, it is interpreted as an octal number;
+if not, it is interpreted as a symbolic mode mask similar
+to that accepted by the <code>chmod</code> command.  If <var>mode</var> is
+omitted, the current value of the mask is printed.  If the <samp>-S</samp>
+option is supplied without a <var>mode</var> argument, the mask is printed
+in a symbolic format.
+If the  <samp>-p</samp> option is supplied, and <var>mode</var>
+is omitted, the output is in a form that may be reused as input.
+The return status is zero if the mode is successfully changed or if
+no <var>mode</var> argument is supplied, and non-zero otherwise.
+</p>
+<p>Note that when the mode is interpreted as an octal number, each number
+of the umask is subtracted from <code>7</code>.  Thus, a umask of <code>022</code>
+results in permissions of <code>755</code>.
+</p>
+</dd>
+<dt><code>unset</code></dt>
+<dd><span id="index-unset"></span>
+<div class="example">
+<pre class="example">unset [-fnv] [<var>name</var>]
+</pre></div>
+
+<p>Remove each variable or function <var>name</var>.
+If the <samp>-v</samp> option is given, each
+<var>name</var> refers to a shell variable and that variable is removed.
+If the <samp>-f</samp> option is given, the <var>name</var>s refer to shell
+functions, and the function definition is removed.
+If the <samp>-n</samp> option is supplied, and <var>name</var> is a variable with
+the <var>nameref</var> attribute, <var>name</var> will be unset rather than the
+variable it references.
+<samp>-n</samp> has no effect if the <samp>-f</samp> option is supplied.
+If no options are supplied, each <var>name</var> refers to a variable; if
+there is no variable by that name, a function with that name, if any, is
+unset.
+Readonly variables and functions may not be unset.
+Some shell variables lose their special behavior if they are unset; such
+behavior is noted in the description of the individual variables.
+The return status is zero unless a <var>name</var> is readonly.
+</p></dd>
+</dl>
+
+<hr>
+<span id="Bash-Builtins"></span><div class="header">
+<p>
+Next: <a href="#Modifying-Shell-Behavior" accesskey="n" rel="next">Modifying Shell Behavior</a>, Previous: <a href="#Bourne-Shell-Builtins" accesskey="p" rel="prev">Bourne Shell Builtins</a>, Up: <a href="#Shell-Builtin-Commands" accesskey="u" rel="up">Shell Builtin Commands</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Bash-Builtin-Commands"></span><h3 class="section">4.2 Bash Builtin Commands</h3>
+
+<p>This section describes builtin commands which are unique to
+or have been extended in Bash.
+Some of these commands are specified in the <small>POSIX</small> standard.
+</p>
+<dl compact="compact">
+<dt><code>alias</code></dt>
+<dd><span id="index-alias"></span>
+<div class="example">
+<pre class="example">alias [-p] [<var>name</var>[=<var>value</var>] &hellip;]
+</pre></div>
+
+<p>Without arguments or with the <samp>-p</samp> option, <code>alias</code> prints
+the list of aliases on the standard output in a form that allows
+them to be reused as input.
+If arguments are supplied, an alias is defined for each <var>name</var>
+whose <var>value</var> is given.  If no <var>value</var> is given, the name
+and value of the alias is printed.
+Aliases are described in <a href="#Aliases">Aliases</a>.
+</p>
+</dd>
+<dt><code>bind</code></dt>
+<dd><span id="index-bind"></span>
+<div class="example">
+<pre class="example">bind [-m <var>keymap</var>] [-lpsvPSVX]
+bind [-m <var>keymap</var>] [-q <var>function</var>] [-u <var>function</var>] [-r <var>keyseq</var>]
+bind [-m <var>keymap</var>] -f <var>filename</var>
+bind [-m <var>keymap</var>] -x <var>keyseq:shell-command</var>
+bind [-m <var>keymap</var>] <var>keyseq:function-name</var>
+bind [-m <var>keymap</var>] <var>keyseq:readline-command</var>
+</pre></div>
+
+<p>Display current Readline (see <a href="#Command-Line-Editing">Command Line Editing</a>)
+key and function bindings,
+bind a key sequence to a Readline function or macro,
+or set a Readline variable.
+Each non-option argument is a command as it would appear in a
+Readline initialization file (see <a href="#Readline-Init-File">Readline Init File</a>),
+but each binding or command must be passed as a separate argument;  e.g.,
+&lsquo;<samp>&quot;\C-x\C-r&quot;:re-read-init-file</samp>&rsquo;.
+</p>
+<p>Options, if supplied, have the following meanings:
+</p>
+<dl compact="compact">
+<dt><code>-m <var>keymap</var></code></dt>
+<dd><p>Use <var>keymap</var> as the keymap to be affected by
+the subsequent bindings.  Acceptable <var>keymap</var>
+names are
+<code>emacs</code>,
+<code>emacs-standard</code>,
+<code>emacs-meta</code>,
+<code>emacs-ctlx</code>,
+<code>vi</code>,
+<code>vi-move</code>,
+<code>vi-command</code>, and
+<code>vi-insert</code>.
+<code>vi</code> is equivalent to <code>vi-command</code> (<code>vi-move</code> is also a
+synonym); <code>emacs</code> is equivalent to <code>emacs-standard</code>.
+</p>
+</dd>
+<dt><code>-l</code></dt>
+<dd><p>List the names of all Readline functions.
+</p>
+</dd>
+<dt><code>-p</code></dt>
+<dd><p>Display Readline function names and bindings in such a way that they
+can be used as input or in a Readline initialization file.
+</p>
+</dd>
+<dt><code>-P</code></dt>
+<dd><p>List current Readline function names and bindings.
+</p>
+</dd>
+<dt><code>-v</code></dt>
+<dd><p>Display Readline variable names and values in such a way that they
+can be used as input or in a Readline initialization file.
+</p>
+</dd>
+<dt><code>-V</code></dt>
+<dd><p>List current Readline variable names and values.
+</p>
+</dd>
+<dt><code>-s</code></dt>
+<dd><p>Display Readline key sequences bound to macros and the strings they output
+in such a way that they can be used as input or in a Readline
+initialization file.
+</p>
+</dd>
+<dt><code>-S</code></dt>
+<dd><p>Display Readline key sequences bound to macros and the strings they output.
+</p>
+</dd>
+<dt><code>-f <var>filename</var></code></dt>
+<dd><p>Read key bindings from <var>filename</var>.
+</p>
+</dd>
+<dt><code>-q <var>function</var></code></dt>
+<dd><p>Query about which keys invoke the named <var>function</var>.
+</p>
+</dd>
+<dt><code>-u <var>function</var></code></dt>
+<dd><p>Unbind all keys bound to the named <var>function</var>.
+</p>
+</dd>
+<dt><code>-r <var>keyseq</var></code></dt>
+<dd><p>Remove any current binding for <var>keyseq</var>.
+</p>
+</dd>
+<dt><code>-x <var>keyseq:shell-command</var></code></dt>
+<dd><p>Cause <var>shell-command</var> to be executed whenever <var>keyseq</var> is
+entered.
+When <var>shell-command</var> is executed, the shell sets the
+<code>READLINE_LINE</code> variable to the contents of the Readline line
+buffer and the <code>READLINE_POINT</code> and <code>READLINE_MARK</code> variables
+to the current location of the insertion point and the saved insertion
+point (the <var>mark</var>), respectively.
+If the executed command changes the value of any of <code>READLINE_LINE</code>,
+<code>READLINE_POINT</code>, or <code>READLINE_MARK</code>, those new values will be
+reflected in the editing state.
+</p>
+</dd>
+<dt><code>-X</code></dt>
+<dd><p>List all key sequences bound to shell commands and the associated commands
+in a format that can be reused as input.
+</p></dd>
+</dl>
+
+<p>The return status is zero unless an invalid option is supplied or an
+error occurs.
+</p>
+</dd>
+<dt><code>builtin</code></dt>
+<dd><span id="index-builtin"></span>
+<div class="example">
+<pre class="example">builtin [<var>shell-builtin</var> [<var>args</var>]]
+</pre></div>
+
+<p>Run a shell builtin, passing it <var>args</var>, and return its exit status.
+This is useful when defining a shell function with the same
+name as a shell builtin, retaining the functionality of the builtin within
+the function.
+The return status is non-zero if <var>shell-builtin</var> is not a shell
+builtin command.
+</p>
+</dd>
+<dt><code>caller</code></dt>
+<dd><span id="index-caller"></span>
+<div class="example">
+<pre class="example">caller [<var>expr</var>]
+</pre></div>
+
+<p>Returns the context of any active subroutine call (a shell function or
+a script executed with the <code>.</code> or <code>source</code> builtins).
+</p>
+<p>Without <var>expr</var>, <code>caller</code> displays the line number and source
+filename of the current subroutine call.
+If a non-negative integer is supplied as <var>expr</var>, <code>caller</code>
+displays the line number, subroutine name, and source file corresponding
+to that position in the current execution call stack.  This extra
+information may be used, for example, to print a stack trace.  The
+current frame is frame 0.
+</p>
+<p>The return value is 0 unless the shell is not executing a subroutine
+call or <var>expr</var> does not correspond to a valid position in the
+call stack.
+</p>
+</dd>
+<dt><code>command</code></dt>
+<dd><span id="index-command"></span>
+<div class="example">
+<pre class="example">command [-pVv] <var>command</var> [<var>arguments</var> &hellip;]
+</pre></div>
+
+<p>Runs <var>command</var> with <var>arguments</var> ignoring any shell function
+named <var>command</var>.
+Only shell builtin commands or commands found by searching the
+<code>PATH</code> are executed.
+If there is a shell function named <code>ls</code>, running &lsquo;<samp>command ls</samp>&rsquo;
+within the function will execute the external command <code>ls</code>
+instead of calling the function recursively.
+The <samp>-p</samp> option means to use a default value for <code>PATH</code>
+that is guaranteed to find all of the standard utilities.
+The return status in this case is 127 if <var>command</var> cannot be
+found or an error occurred, and the exit status of <var>command</var>
+otherwise.
+</p>
+<p>If either the <samp>-V</samp> or <samp>-v</samp> option is supplied, a
+description of <var>command</var> is printed.  The <samp>-v</samp> option
+causes a single word indicating the command or file name used to
+invoke <var>command</var> to be displayed; the <samp>-V</samp> option produces
+a more verbose description.  In this case, the return status is
+zero if <var>command</var> is found, and non-zero if not.
+</p>
+</dd>
+<dt><code>declare</code></dt>
+<dd><span id="index-declare"></span>
+<div class="example">
+<pre class="example">declare [-aAfFgiIlnrtux] [-p] [<var>name</var>[=<var>value</var>] &hellip;]
+</pre></div>
+
+<p>Declare variables and give them attributes.  If no <var>name</var>s
+are given, then display the values of variables instead. 
+</p>
+<p>The <samp>-p</samp> option will display the attributes and values of each
+<var>name</var>.
+When <samp>-p</samp> is used with <var>name</var> arguments, additional options,
+other than <samp>-f</samp> and <samp>-F</samp>, are ignored.
+</p>
+<p>When <samp>-p</samp> is supplied without <var>name</var> arguments, <code>declare</code>
+will display the attributes and values of all variables having the
+attributes specified by the additional options.
+If no other options are supplied with <samp>-p</samp>, <code>declare</code> will
+display the attributes and values of all shell variables.  The <samp>-f</samp>
+option will restrict the display to shell functions.
+</p>
+<p>The <samp>-F</samp> option inhibits the display of function definitions;
+only the function name and attributes are printed.
+If the <code>extdebug</code> shell option is enabled using <code>shopt</code>
+(see <a href="#The-Shopt-Builtin">The Shopt Builtin</a>), the source file name and line number where
+each <var>name</var> is defined are displayed as well.
+<samp>-F</samp> implies <samp>-f</samp>.
+</p>
+<p>The <samp>-g</samp> option forces variables to be created or modified at
+the global scope, even when <code>declare</code> is executed in a shell function.
+It is ignored in all other cases.
+</p>
+<p>The <samp>-I</samp> option causes local variables to inherit the attributes
+(except the <var>nameref</var> attribute)
+and value of any existing variable with the same
+<var>name</var> at a surrounding scope.
+If there is no existing variable, the local variable is initially unset.
+</p>
+<p>The following options can be used to restrict output to variables with
+the specified attributes or to give variables attributes:
+</p>
+<dl compact="compact">
+<dt><code>-a</code></dt>
+<dd><p>Each <var>name</var> is an indexed array variable (see <a href="#Arrays">Arrays</a>).
+</p>
+</dd>
+<dt><code>-A</code></dt>
+<dd><p>Each <var>name</var> is an associative array variable (see <a href="#Arrays">Arrays</a>).
+</p>
+</dd>
+<dt><code>-f</code></dt>
+<dd><p>Use function names only.
+</p>
+</dd>
+<dt><code>-i</code></dt>
+<dd><p>The variable is to be treated as
+an integer; arithmetic evaluation (see <a href="#Shell-Arithmetic">Shell Arithmetic</a>) is
+performed when the variable is assigned a value.
+</p>
+</dd>
+<dt><code>-l</code></dt>
+<dd><p>When the variable is assigned a value, all upper-case characters are
+converted to lower-case.
+The upper-case attribute is disabled.
+</p>
+</dd>
+<dt><code>-n</code></dt>
+<dd><p>Give each <var>name</var> the <var>nameref</var> attribute, making
+it a name reference to another variable.
+That other variable is defined by the value of <var>name</var>.
+All references, assignments, and attribute modifications
+to <var>name</var>, except for those using or changing the
+<samp>-n</samp> attribute itself, are performed on the variable referenced by
+<var>name</var>&rsquo;s value.
+The nameref attribute cannot be applied to array variables.
+</p>
+</dd>
+<dt><code>-r</code></dt>
+<dd><p>Make <var>name</var>s readonly.  These names cannot then be assigned values
+by subsequent assignment statements or unset.
+</p>
+</dd>
+<dt><code>-t</code></dt>
+<dd><p>Give each <var>name</var> the <code>trace</code> attribute.
+Traced functions inherit the <code>DEBUG</code> and <code>RETURN</code> traps from
+the calling shell.
+The trace attribute has no special meaning for variables.
+</p>
+</dd>
+<dt><code>-u</code></dt>
+<dd><p>When the variable is assigned a value, all lower-case characters are
+converted to upper-case.
+The lower-case attribute is disabled.
+</p>
+</dd>
+<dt><code>-x</code></dt>
+<dd><p>Mark each <var>name</var> for export to subsequent commands via
+the environment.
+</p></dd>
+</dl>
+
+<p>Using &lsquo;<samp>+</samp>&rsquo; instead of &lsquo;<samp>-</samp>&rsquo; turns off the attribute instead,
+with the exceptions that &lsquo;<samp>+a</samp>&rsquo; and &lsquo;<samp>+A</samp>&rsquo;
+may not be used to destroy array variables and &lsquo;<samp>+r</samp>&rsquo; will not
+remove the readonly attribute.
+When used in a function, <code>declare</code> makes each <var>name</var> local,
+as with the <code>local</code> command, unless the <samp>-g</samp> option is used.
+If a variable name is followed by =<var>value</var>, the value of the variable
+is set to <var>value</var>.
+</p>
+<p>When using <samp>-a</samp> or <samp>-A</samp> and the compound assignment syntax to 
+create array variables, additional attributes do not take effect until
+subsequent assignments.
+</p>
+<p>The return status is zero unless an invalid option is encountered,
+an attempt is made to define a function using &lsquo;<samp>-f foo=bar</samp>&rsquo;,
+an attempt is made to assign a value to a readonly variable,
+an attempt is made to assign a value to an array variable without
+using the compound assignment syntax (see <a href="#Arrays">Arrays</a>),
+one of the <var>names</var> is not a valid shell variable name,
+an attempt is made to turn off readonly status for a readonly variable,
+an attempt is made to turn off array status for an array variable,
+or an attempt is made to display a non-existent function with <samp>-f</samp>.
+</p>
+</dd>
+<dt><code>echo</code></dt>
+<dd><span id="index-echo"></span>
+<div class="example">
+<pre class="example">echo [-neE] [<var>arg</var> &hellip;]
+</pre></div>
+
+<p>Output the <var>arg</var>s, separated by spaces, terminated with a
+newline.
+The return status is 0 unless a write error occurs.
+If <samp>-n</samp> is specified, the trailing newline is suppressed.
+If the <samp>-e</samp> option is given, interpretation of the following
+backslash-escaped characters is enabled.
+The <samp>-E</samp> option disables the interpretation of these escape characters,
+even on systems where they are interpreted by default.
+The <code>xpg_echo</code> shell option may be used to
+dynamically determine whether or not <code>echo</code> expands these
+escape characters by default.
+<code>echo</code> does not interpret <samp>--</samp> to mean the end of options.
+</p>
+<p><code>echo</code> interprets the following escape sequences:
+</p><dl compact="compact">
+<dt><code>\a</code></dt>
+<dd><p>alert (bell)
+</p></dd>
+<dt><code>\b</code></dt>
+<dd><p>backspace
+</p></dd>
+<dt><code>\c</code></dt>
+<dd><p>suppress further output
+</p></dd>
+<dt><code>\e</code></dt>
+<dt><code>\E</code></dt>
+<dd><p>escape
+</p></dd>
+<dt><code>\f</code></dt>
+<dd><p>form feed
+</p></dd>
+<dt><code>\n</code></dt>
+<dd><p>new line
+</p></dd>
+<dt><code>\r</code></dt>
+<dd><p>carriage return
+</p></dd>
+<dt><code>\t</code></dt>
+<dd><p>horizontal tab
+</p></dd>
+<dt><code>\v</code></dt>
+<dd><p>vertical tab
+</p></dd>
+<dt><code>\\</code></dt>
+<dd><p>backslash
+</p></dd>
+<dt><code>\0<var>nnn</var></code></dt>
+<dd><p>the eight-bit character whose value is the octal value <var>nnn</var>
+(zero to three octal digits)
+</p></dd>
+<dt><code>\x<var>HH</var></code></dt>
+<dd><p>the eight-bit character whose value is the hexadecimal value <var>HH</var>
+(one or two hex digits)
+</p></dd>
+<dt><code>\u<var>HHHH</var></code></dt>
+<dd><p>the Unicode (ISO/IEC 10646) character whose value is the hexadecimal value
+<var>HHHH</var> (one to four hex digits)
+</p></dd>
+<dt><code>\U<var>HHHHHHHH</var></code></dt>
+<dd><p>the Unicode (ISO/IEC 10646) character whose value is the hexadecimal value
+<var>HHHHHHHH</var> (one to eight hex digits)
+</p></dd>
+</dl>
+
+</dd>
+<dt><code>enable</code></dt>
+<dd><span id="index-enable"></span>
+<div class="example">
+<pre class="example">enable [-a] [-dnps] [-f <var>filename</var>] [<var>name</var> &hellip;]
+</pre></div>
+
+<p>Enable and disable builtin shell commands.
+Disabling a builtin allows a disk command which has the same name
+as a shell builtin to be executed without specifying a full pathname,
+even though the shell normally searches for builtins before disk commands.
+If <samp>-n</samp> is used, the <var>name</var>s become disabled.  Otherwise
+<var>name</var>s are enabled.  For example, to use the <code>test</code> binary
+found via <code>$PATH</code> instead of the shell builtin version, type
+&lsquo;<samp>enable -n test</samp>&rsquo;.
+</p>
+<p>If the <samp>-p</samp> option is supplied, or no <var>name</var> arguments appear,
+a list of shell builtins is printed.  With no other arguments, the list
+consists of all enabled shell builtins.
+The <samp>-a</samp> option means to list
+each builtin with an indication of whether or not it is enabled. 
+</p>
+<p>The <samp>-f</samp> option means to load the new builtin command <var>name</var>
+from shared object <var>filename</var>, on systems that support dynamic loading.
+The <samp>-d</samp> option will delete a builtin loaded with <samp>-f</samp>.
+</p>
+<p>If there are no options, a list of the shell builtins is displayed.
+The <samp>-s</samp> option restricts <code>enable</code> to the <small>POSIX</small> special
+builtins.  If <samp>-s</samp> is used with <samp>-f</samp>, the new builtin becomes
+a special builtin (see <a href="#Special-Builtins">Special Builtins</a>).
+</p>
+<p>The return status is zero unless a <var>name</var> is not a shell builtin
+or there is an error loading a new builtin from a shared object.
+</p>
+</dd>
+<dt><code>help</code></dt>
+<dd><span id="index-help"></span>
+<div class="example">
+<pre class="example">help [-dms] [<var>pattern</var>]
+</pre></div>
+
+<p>Display helpful information about builtin commands.
+If <var>pattern</var> is specified, <code>help</code> gives detailed help
+on all commands matching <var>pattern</var>, otherwise a list of
+the builtins is printed.
+</p>
+<p>Options, if supplied, have the following meanings:
+</p>
+<dl compact="compact">
+<dt><code>-d</code></dt>
+<dd><p>Display a short description of each <var>pattern</var>
+</p></dd>
+<dt><code>-m</code></dt>
+<dd><p>Display the description of each <var>pattern</var> in a manpage-like format
+</p></dd>
+<dt><code>-s</code></dt>
+<dd><p>Display only a short usage synopsis for each <var>pattern</var>
+</p></dd>
+</dl>
+
+<p>The return status is zero unless no command matches <var>pattern</var>.
+</p>
+</dd>
+<dt><code>let</code></dt>
+<dd><span id="index-let"></span>
+<div class="example">
+<pre class="example">let <var>expression</var> [<var>expression</var> &hellip;]
+</pre></div>
+
+<p>The <code>let</code> builtin allows arithmetic to be performed on shell
+variables.  Each <var>expression</var> is evaluated according to the
+rules given below in <a href="#Shell-Arithmetic">Shell Arithmetic</a>.  If the
+last <var>expression</var> evaluates to 0, <code>let</code> returns 1;
+otherwise 0 is returned.
+</p>
+</dd>
+<dt><code>local</code></dt>
+<dd><span id="index-local"></span>
+<div class="example">
+<pre class="example">local [<var>option</var>] <var>name</var>[=<var>value</var>] &hellip;
+</pre></div>
+
+<p>For each argument, a local variable named <var>name</var> is created,
+and assigned <var>value</var>.
+The <var>option</var> can be any of the options accepted by <code>declare</code>.
+<code>local</code> can only be used within a function; it makes the variable
+<var>name</var> have a visible scope restricted to that function and its
+children.
+If <var>name</var> is &lsquo;<samp>-</samp>&rsquo;, the set of shell options is made local to the
+function in which <code>local</code> is invoked: shell options changed using
+the <code>set</code> builtin inside the function are restored to their original
+values when the function returns.
+The restore is effected as if a series of <code>set</code> commands were executed
+to restore the values that were in place before the function.
+The return status is zero unless <code>local</code> is used outside
+a function, an invalid <var>name</var> is supplied, or <var>name</var> is a
+readonly variable.
+</p>
+</dd>
+<dt><code>logout</code></dt>
+<dd><span id="index-logout"></span>
+<div class="example">
+<pre class="example">logout [<var>n</var>]
+</pre></div>
+
+<p>Exit a login shell, returning a status of <var>n</var> to the shell&rsquo;s
+parent.
+</p>
+</dd>
+<dt><code>mapfile</code></dt>
+<dd><span id="index-mapfile"></span>
+<div class="example">
+<pre class="example">mapfile [-d <var>delim</var>] [-n <var>count</var>] [-O <var>origin</var>] [-s <var>count</var>]
+    [-t] [-u <var>fd</var>] [-C <var>callback</var>] [-c <var>quantum</var>] [<var>array</var>]
+</pre></div>
+
+<p>Read lines from the standard input into the indexed array variable <var>array</var>,
+or from file descriptor <var>fd</var>
+if the <samp>-u</samp> option is supplied.
+The variable <code>MAPFILE</code> is the default <var>array</var>.
+Options, if supplied, have the following meanings:
+</p>
+<dl compact="compact">
+<dt><code>-d</code></dt>
+<dd><p>The first character of <var>delim</var> is used to terminate each input line,
+rather than newline.
+If <var>delim</var> is the empty string, <code>mapfile</code> will terminate a line
+when it reads a NUL character.
+</p></dd>
+<dt><code>-n</code></dt>
+<dd><p>Copy at most <var>count</var> lines.  If <var>count</var> is 0, all lines are copied.
+</p></dd>
+<dt><code>-O</code></dt>
+<dd><p>Begin assigning to <var>array</var> at index <var>origin</var>.
+The default index is 0.
+</p></dd>
+<dt><code>-s</code></dt>
+<dd><p>Discard the first <var>count</var> lines read.
+</p></dd>
+<dt><code>-t</code></dt>
+<dd><p>Remove a trailing <var>delim</var> (default newline) from each line read.
+</p></dd>
+<dt><code>-u</code></dt>
+<dd><p>Read lines from file descriptor <var>fd</var> instead of the standard input.
+</p></dd>
+<dt><code>-C</code></dt>
+<dd><p>Evaluate <var>callback</var> each time <var>quantum</var> lines are read.
+The <samp>-c</samp> option specifies <var>quantum</var>.
+</p></dd>
+<dt><code>-c</code></dt>
+<dd><p>Specify the number of lines read between each call to <var>callback</var>.
+</p></dd>
+</dl>
+
+<p>If <samp>-C</samp> is specified without <samp>-c</samp>,
+the default quantum is 5000.
+When <var>callback</var>  is evaluated, it is supplied the index of the next
+array element to be assigned and the line to be assigned to that element
+as additional arguments.
+<var>callback</var> is evaluated after the line is read but before the
+array element is assigned.
+</p>
+<p>If not supplied with an explicit origin, <code>mapfile</code> will clear <var>array</var>
+before assigning to it.
+</p>
+<p><code>mapfile</code> returns successfully unless an invalid option or option
+argument is supplied, <var>array</var> is invalid or unassignable, or <var>array</var>
+is not an indexed array.
+</p>
+</dd>
+<dt><code>printf</code></dt>
+<dd><span id="index-printf"></span>
+<div class="example">
+<pre class="example">printf [-v <var>var</var>] <var>format</var> [<var>arguments</var>]
+</pre></div>
+
+<p>Write the formatted <var>arguments</var> to the standard output under the
+control of the <var>format</var>.
+The <samp>-v</samp> option causes the output to be assigned to the variable
+<var>var</var> rather than being printed to the standard output.
+</p>
+<p>The <var>format</var> is a character string which contains three types of objects:
+plain characters, which are simply copied to standard output, character
+escape sequences, which are converted and copied to the standard output, and
+format specifications, each of which causes printing of the next successive
+<var>argument</var>.
+In addition to the standard <code>printf(1)</code> formats, <code>printf</code>
+interprets the following extensions:
+</p>
+<dl compact="compact">
+<dt><code>%b</code></dt>
+<dd><p>Causes <code>printf</code> to expand backslash escape sequences in the
+corresponding <var>argument</var> in the same way as <code>echo -e</code>
+(see <a href="#Bash-Builtins">Bash Builtins</a>).
+</p></dd>
+<dt><code>%q</code></dt>
+<dd><p>Causes <code>printf</code> to output the
+corresponding <var>argument</var> in a format that can be reused as shell input.
+</p></dd>
+<dt><code>%(<var>datefmt</var>)T</code></dt>
+<dd><p>Causes <code>printf</code> to output the date-time string resulting from using
+<var>datefmt</var> as a format string for <code>strftime</code>(3).
+The corresponding <var>argument</var> is an integer representing the number of
+seconds since the epoch.
+Two special argument values may be used: -1 represents the current
+time, and -2 represents the time the shell was invoked.
+If no argument is specified, conversion behaves as if -1 had been given.
+This is an exception to the usual <code>printf</code> behavior.
+</p></dd>
+</dl>
+
+<p>The %b, %q, and %T directives all use the field width and precision
+arguments from the format specification and write that many bytes from    
+(or use that wide a field for) the expanded argument, which usually
+contains more characters than the original.
+</p>
+<p>Arguments to non-string format specifiers are treated as C language constants,
+except that a leading plus or minus sign is allowed, and if the leading
+character is a single or double quote, the value is the ASCII value of
+the following character.
+</p>
+<p>The <var>format</var> is reused as necessary to consume all of the <var>arguments</var>.
+If the <var>format</var> requires more <var>arguments</var> than are supplied, the
+extra format specifications behave as if a zero value or null string, as
+appropriate, had been supplied.  The return value is zero on success,
+non-zero on failure.
+</p>
+</dd>
+<dt><code>read</code></dt>
+<dd><span id="index-read"></span>
+<div class="example">
+<pre class="example">read [-ers] [-a <var>aname</var>] [-d <var>delim</var>] [-i <var>text</var>] [-n <var>nchars</var>]
+    [-N <var>nchars</var>] [-p <var>prompt</var>] [-t <var>timeout</var>] [-u <var>fd</var>] [<var>name</var> &hellip;]
+</pre></div>
+
+<p>One line is read from the standard input, or from the file descriptor
+<var>fd</var> supplied as an argument to the <samp>-u</samp> option,
+split into words as described above in <a href="#Word-Splitting">Word Splitting</a>,
+and the first word
+is assigned to the first <var>name</var>, the second word to the second <var>name</var>,
+and so on.
+If there are more words than names,
+the remaining words and their intervening delimiters are assigned
+to the last <var>name</var>.
+If there are fewer words read from the input stream than names,
+the remaining names are assigned empty values.
+The characters in the value of the <code>IFS</code> variable
+are used to split the line into words using the same rules the shell
+uses for expansion (described above in <a href="#Word-Splitting">Word Splitting</a>).
+The backslash character &lsquo;<samp>\</samp>&rsquo; may be used to remove any special
+meaning for the next character read and for line continuation.
+</p>
+<p>Options, if supplied, have the following meanings:
+</p>
+<dl compact="compact">
+<dt><code>-a <var>aname</var></code></dt>
+<dd><p>The words are assigned to sequential indices of the array variable
+<var>aname</var>, starting at 0.
+All elements are removed from <var>aname</var> before the assignment.
+Other <var>name</var> arguments are ignored.
+</p>
+</dd>
+<dt><code>-d <var>delim</var></code></dt>
+<dd><p>The first character of <var>delim</var> is used to terminate the input line,
+rather than newline.
+If <var>delim</var> is the empty string, <code>read</code> will terminate a line
+when it reads a NUL character.
+</p>
+</dd>
+<dt><code>-e</code></dt>
+<dd><p>Readline (see <a href="#Command-Line-Editing">Command Line Editing</a>) is used to obtain the line.
+Readline uses the current (or default, if line editing was not previously
+active) editing settings, but uses Readline&rsquo;s default filename completion.
+</p>
+</dd>
+<dt><code>-i <var>text</var></code></dt>
+<dd><p>If Readline is being used to read the line, <var>text</var> is placed into
+the editing buffer before editing begins.
+</p>
+</dd>
+<dt><code>-n <var>nchars</var></code></dt>
+<dd><p><code>read</code> returns after reading <var>nchars</var> characters rather than
+waiting for a complete line of input, but honors a delimiter if fewer
+than <var>nchars</var> characters are read before the delimiter.
+</p>
+</dd>
+<dt><code>-N <var>nchars</var></code></dt>
+<dd><p><code>read</code> returns after reading exactly <var>nchars</var> characters rather
+than waiting for a complete line of input, unless EOF is encountered or
+<code>read</code> times out.
+Delimiter characters encountered in the input are
+not treated specially and do not cause <code>read</code> to return until
+<var>nchars</var> characters are read.
+The result is not split on the characters in <code>IFS</code>; the intent is
+that the variable is assigned exactly the characters read
+(with the exception of backslash; see the <samp>-r</samp> option below).
+</p>
+</dd>
+<dt><code>-p <var>prompt</var></code></dt>
+<dd><p>Display <var>prompt</var>, without a trailing newline, before attempting
+to read any input.
+The prompt is displayed only if input is coming from a terminal.
+</p>
+</dd>
+<dt><code>-r</code></dt>
+<dd><p>If this option is given, backslash does not act as an escape character.
+The backslash is considered to be part of the line.
+In particular, a backslash-newline pair may not then be used as a line
+continuation.
+</p>
+</dd>
+<dt><code>-s</code></dt>
+<dd><p>Silent mode.  If input is coming from a terminal, characters are
+not echoed.
+</p>
+</dd>
+<dt><code>-t <var>timeout</var></code></dt>
+<dd><p>Cause <code>read</code> to time out and return failure if a complete line of
+input (or a specified number of characters)
+is not read within <var>timeout</var> seconds.
+<var>timeout</var>  may be a decimal number with a fractional portion following
+the decimal point.
+This option is only effective if <code>read</code> is reading input from a
+terminal, pipe, or other special file; it has no effect when reading
+from regular files.
+If <code>read</code> times out, <code>read</code> saves any partial input read into
+the specified variable <var>name</var>.
+If <var>timeout</var> is 0, <code>read</code> returns immediately, without trying to
+read any data.  The exit status is 0 if input is available on
+the specified file descriptor, non-zero otherwise.
+The exit status is greater than 128 if the timeout is exceeded.
+</p>
+</dd>
+<dt><code>-u <var>fd</var></code></dt>
+<dd><p>Read input from file descriptor <var>fd</var>.
+</p></dd>
+</dl>
+
+<p>If no <var>name</var>s are supplied, the line read,
+without the ending delimiter but otherwise unmodified,
+is assigned to the
+variable <code>REPLY</code>.
+The exit status is zero, unless end-of-file is encountered, <code>read</code>
+times out (in which case the status is greater than 128),
+a variable assignment error (such as assigning to a readonly variable) occurs,
+or an invalid file descriptor is supplied as the argument to <samp>-u</samp>.
+</p>
+</dd>
+<dt><code>readarray</code></dt>
+<dd><span id="index-readarray"></span>
+<div class="example">
+<pre class="example">readarray [-d <var>delim</var>] [-n <var>count</var>] [-O <var>origin</var>] [-s <var>count</var>]
+    [-t] [-u <var>fd</var>] [-C <var>callback</var>] [-c <var>quantum</var>] [<var>array</var>]
+</pre></div>
+
+<p>Read lines from the standard input into the indexed array variable <var>array</var>,
+or from file descriptor <var>fd</var>
+if the <samp>-u</samp> option is supplied.
+</p>
+<p>A synonym for <code>mapfile</code>.
+</p>
+</dd>
+<dt><code>source</code></dt>
+<dd><span id="index-source"></span>
+<div class="example">
+<pre class="example">source <var>filename</var>
+</pre></div>
+
+<p>A synonym for <code>.</code> (see <a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a>).
+</p>
+</dd>
+<dt><code>type</code></dt>
+<dd><span id="index-type"></span>
+<div class="example">
+<pre class="example">type [-afptP] [<var>name</var> &hellip;]
+</pre></div>
+
+<p>For each <var>name</var>, indicate how it would be interpreted if used as a
+command name.
+</p>
+<p>If the <samp>-t</samp> option is used, <code>type</code> prints a single word
+which is one of &lsquo;<samp>alias</samp>&rsquo;, &lsquo;<samp>function</samp>&rsquo;, &lsquo;<samp>builtin</samp>&rsquo;,
+&lsquo;<samp>file</samp>&rsquo; or &lsquo;<samp>keyword</samp>&rsquo;,
+if <var>name</var> is an alias, shell function, shell builtin,
+disk file, or shell reserved word, respectively.
+If the <var>name</var> is not found, then nothing is printed, and
+<code>type</code> returns a failure status.
+</p>
+<p>If the <samp>-p</samp> option is used, <code>type</code> either returns the name
+of the disk file that would be executed, or nothing if <samp>-t</samp>
+would not return &lsquo;<samp>file</samp>&rsquo;.
+</p>
+<p>The <samp>-P</samp> option forces a path search for each <var>name</var>, even if
+<samp>-t</samp> would not return &lsquo;<samp>file</samp>&rsquo;.
+</p>
+<p>If a command is hashed, <samp>-p</samp> and <samp>-P</samp> print the hashed value,
+which is not necessarily the file that appears first in <code>$PATH</code>.
+</p>
+<p>If the <samp>-a</samp> option is used, <code>type</code> returns all of the places
+that contain an executable named <var>file</var>.
+This includes aliases and functions, if and only if the <samp>-p</samp> option
+is not also used.
+</p>
+<p>If the <samp>-f</samp> option is used, <code>type</code> does not attempt to find
+shell functions, as with the <code>command</code> builtin.
+</p>
+<p>The return status is zero if all of the <var>names</var> are found, non-zero
+if any are not found.
+</p>
+</dd>
+<dt><code>typeset</code></dt>
+<dd><span id="index-typeset"></span>
+<div class="example">
+<pre class="example">typeset [-afFgrxilnrtux] [-p] [<var>name</var>[=<var>value</var>] &hellip;]
+</pre></div>
+
+<p>The <code>typeset</code> command is supplied for compatibility with the Korn
+shell.
+It is a synonym for the <code>declare</code> builtin command.
+</p>
+</dd>
+<dt><code>ulimit</code></dt>
+<dd><span id="index-ulimit"></span>
+<div class="example">
+<pre class="example">ulimit [-HS] -a
+ulimit [-HS] [-bcdefiklmnpqrstuvxPRT] [<var>limit</var>]
+</pre></div>
+
+<p><code>ulimit</code> provides control over the resources available to processes
+started by the shell, on systems that allow such control.  If an
+option is given, it is interpreted as follows:
+</p>
+<dl compact="compact">
+<dt><code>-S</code></dt>
+<dd><p>Change and report the soft limit associated with a resource.
+</p>
+</dd>
+<dt><code>-H</code></dt>
+<dd><p>Change and report the hard limit associated with a resource.
+</p>
+</dd>
+<dt><code>-a</code></dt>
+<dd><p>All current limits are reported; no limits are set.
+</p>
+</dd>
+<dt><code>-b</code></dt>
+<dd><p>The maximum socket buffer size.
+</p>
+</dd>
+<dt><code>-c</code></dt>
+<dd><p>The maximum size of core files created.
+</p>
+</dd>
+<dt><code>-d</code></dt>
+<dd><p>The maximum size of a process&rsquo;s data segment.
+</p>
+</dd>
+<dt><code>-e</code></dt>
+<dd><p>The maximum scheduling priority (&quot;nice&quot;).
+</p>
+</dd>
+<dt><code>-f</code></dt>
+<dd><p>The maximum size of files written by the shell and its children.
+</p>
+</dd>
+<dt><code>-i</code></dt>
+<dd><p>The maximum number of pending signals.
+</p>
+</dd>
+<dt><code>-k</code></dt>
+<dd><p>The maximum number of kqueues that may be allocated.
+</p>
+</dd>
+<dt><code>-l</code></dt>
+<dd><p>The maximum size that may be locked into memory.
+</p>
+</dd>
+<dt><code>-m</code></dt>
+<dd><p>The maximum resident set size (many systems do not honor this limit).
+</p>
+</dd>
+<dt><code>-n</code></dt>
+<dd><p>The maximum number of open file descriptors (most systems do not
+allow this value to be set).
+</p>
+</dd>
+<dt><code>-p</code></dt>
+<dd><p>The pipe buffer size.
+</p>
+</dd>
+<dt><code>-q</code></dt>
+<dd><p>The maximum number of bytes in <small>POSIX</small> message queues.
+</p>
+</dd>
+<dt><code>-r</code></dt>
+<dd><p>The maximum real-time scheduling priority.
+</p>
+</dd>
+<dt><code>-s</code></dt>
+<dd><p>The maximum stack size.
+</p>
+</dd>
+<dt><code>-t</code></dt>
+<dd><p>The maximum amount of cpu time in seconds.
+</p>
+</dd>
+<dt><code>-u</code></dt>
+<dd><p>The maximum number of processes available to a single user.
+</p>
+</dd>
+<dt><code>-v</code></dt>
+<dd><p>The maximum amount of virtual memory available to the shell, and, on
+some systems, to its children.
+</p>
+</dd>
+<dt><code>-x</code></dt>
+<dd><p>The maximum number of file locks.
+</p>
+</dd>
+<dt><code>-P</code></dt>
+<dd><p>The maximum number of pseudoterminals.
+</p>
+</dd>
+<dt><code>-R</code></dt>
+<dd><p>The maximum time a real-time process can run before blocking, in microseconds.
+</p>
+</dd>
+<dt><code>-T</code></dt>
+<dd><p>The maximum number of threads.
+</p></dd>
+</dl>
+
+<p>If <var>limit</var> is given, and the <samp>-a</samp> option is not used,
+<var>limit</var> is the new value of the specified resource.
+The special <var>limit</var> values <code>hard</code>, <code>soft</code>, and
+<code>unlimited</code> stand for the current hard limit, the current soft limit,
+and no limit, respectively.
+A hard limit cannot be increased by a non-root user once it is set;
+a soft limit may be increased up to the value of the hard limit.
+Otherwise, the current value of the soft limit for the specified resource
+is printed, unless the <samp>-H</samp> option is supplied.
+When more than one
+resource is specified, the limit name and unit, if appropriate,
+are printed before the value.
+When setting new limits, if neither <samp>-H</samp> nor <samp>-S</samp> is supplied,
+both the hard and soft limits are set.
+If no option is given, then <samp>-f</samp> is assumed.  Values are in 1024-byte
+increments, except for
+<samp>-t</samp>, which is in seconds;
+<samp>-R</samp>, which is in microseconds;
+<samp>-p</samp>, which is in units of 512-byte blocks;
+<samp>-P</samp>,
+<samp>-T</samp>,
+<samp>-b</samp>,
+<samp>-k</samp>,
+<samp>-n</samp> and <samp>-u</samp>, which are unscaled values;
+and, when in <small>POSIX</small> Mode (see <a href="#Bash-POSIX-Mode">Bash POSIX Mode</a>),
+<samp>-c</samp> and <samp>-f</samp>, which are in 512-byte increments.
+</p>
+<p>The return status is zero unless an invalid option or argument is supplied,
+or an error occurs while setting a new limit.
+</p>
+</dd>
+<dt><code>unalias</code></dt>
+<dd><span id="index-unalias"></span>
+<div class="example">
+<pre class="example">unalias [-a] [<var>name</var> &hellip; ]
+</pre></div>
+
+<p>Remove each <var>name</var> from the list of aliases.  If <samp>-a</samp> is
+supplied, all aliases are removed.
+Aliases are described in <a href="#Aliases">Aliases</a>.
+</p></dd>
+</dl>
+
+<hr>
+<span id="Modifying-Shell-Behavior"></span><div class="header">
+<p>
+Next: <a href="#Special-Builtins" accesskey="n" rel="next">Special Builtins</a>, Previous: <a href="#Bash-Builtins" accesskey="p" rel="prev">Bash Builtins</a>, Up: <a href="#Shell-Builtin-Commands" accesskey="u" rel="up">Shell Builtin Commands</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Modifying-Shell-Behavior-1"></span><h3 class="section">4.3 Modifying Shell Behavior</h3>
+ 
+<table class="menu" border="0" cellspacing="0">
+<tr><td align="left" valign="top">&bull; <a href="#The-Set-Builtin" accesskey="1">The Set Builtin</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Change the values of shell attributes and
+				positional parameters.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#The-Shopt-Builtin" accesskey="2">The Shopt Builtin</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Modify shell optional behavior.
+</td></tr>
+</table>
+
+<hr>
+<span id="The-Set-Builtin"></span><div class="header">
+<p>
+Next: <a href="#The-Shopt-Builtin" accesskey="n" rel="next">The Shopt Builtin</a>, Up: <a href="#Modifying-Shell-Behavior" accesskey="u" rel="up">Modifying Shell Behavior</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="The-Set-Builtin-1"></span><h4 class="subsection">4.3.1 The Set Builtin</h4>
+
+<p>This builtin is so complicated that it deserves its own section.  <code>set</code>
+allows you to change the values of shell options and set the positional
+parameters, or to display the names and values of shell variables.
+</p>
+<dl compact="compact">
+<dt><code>set</code></dt>
+<dd><span id="index-set"></span>
+<div class="example">
+<pre class="example">set [--abefhkmnptuvxBCEHPT] [-o <var>option-name</var>] [<var>argument</var> &hellip;]
+set [+abefhkmnptuvxBCEHPT] [+o <var>option-name</var>] [<var>argument</var> &hellip;]
+</pre></div>
+
+<p>If no options or arguments are supplied, <code>set</code> displays the names
+and values of all shell variables and functions, sorted according to the
+current locale, in a format that may be reused as input
+for setting or resetting the currently-set variables.
+Read-only variables cannot be reset.
+In <small>POSIX</small> mode, only shell variables are listed.
+</p>
+<p>When options are supplied, they set or unset shell attributes.
+Options, if specified, have the following meanings:
+</p>
+<dl compact="compact">
+<dt><code>-a</code></dt>
+<dd><p>Each variable or function that is created or modified is given the
+export attribute and marked for export to the environment of
+subsequent commands.
+</p>
+</dd>
+<dt><code>-b</code></dt>
+<dd><p>Cause the status of terminated background jobs to be reported
+immediately, rather than before printing the next primary prompt.
+</p>
+</dd>
+<dt><code>-e</code></dt>
+<dd><p>Exit immediately if
+a pipeline (see <a href="#Pipelines">Pipelines</a>), which may consist of a single simple command
+(see <a href="#Simple-Commands">Simple Commands</a>),
+a list (see <a href="#Lists">Lists</a>),
+or a compound command (see <a href="#Compound-Commands">Compound Commands</a>)
+returns a non-zero status.
+The shell does not exit if the command that fails is part of the
+command list immediately following a <code>while</code> or <code>until</code> keyword,
+part of the test in an <code>if</code> statement,
+part of any command executed in a <code>&amp;&amp;</code> or <code>||</code> list except
+the command following the final <code>&amp;&amp;</code> or <code>||</code>,
+any command in a pipeline but the last,
+or if the command&rsquo;s return status is being inverted with <code>!</code>.
+If a compound command other than a subshell
+returns a non-zero status because a command failed
+while <samp>-e</samp> was being ignored, the shell does not exit.
+A trap on <code>ERR</code>, if set, is executed before the shell exits.
+</p>
+<p>This option applies to the shell environment and each subshell environment
+separately (see <a href="#Command-Execution-Environment">Command Execution Environment</a>), and may cause
+subshells to exit before executing all the commands in the subshell.
+</p>
+<p>If a compound command or shell function executes in a context where
+<samp>-e</samp> is being ignored,
+none of the commands executed within the compound command or function body
+will be affected by the <samp>-e</samp> setting, even if <samp>-e</samp> is set
+and a command returns a failure status.
+If a compound command or shell function sets <samp>-e</samp> while executing in
+a context where <samp>-e</samp> is ignored, that setting will not have any
+effect until the compound command or the command containing the function
+call completes.
+</p>
+</dd>
+<dt><code>-f</code></dt>
+<dd><p>Disable filename expansion (globbing).
+</p>
+</dd>
+<dt><code>-h</code></dt>
+<dd><p>Locate and remember (hash) commands as they are looked up for execution.
+This option is enabled by default.
+</p>
+</dd>
+<dt><code>-k</code></dt>
+<dd><p>All arguments in the form of assignment statements are placed
+in the environment for a command, not just those that precede
+the command name.
+</p>
+</dd>
+<dt><code>-m</code></dt>
+<dd><p>Job control is enabled (see <a href="#Job-Control">Job Control</a>).
+All processes run in a separate process group.
+When a background job completes, the shell prints a line
+containing its exit status.
+</p>
+</dd>
+<dt><code>-n</code></dt>
+<dd><p>Read commands but do not execute them.
+This may be used to check a script for syntax errors.
+This option is ignored by interactive shells.
+</p>
+</dd>
+<dt><code>-o <var>option-name</var></code></dt>
+<dd>
+<p>Set the option corresponding to <var>option-name</var>:
+</p>
+<dl compact="compact">
+<dt><code>allexport</code></dt>
+<dd><p>Same as <code>-a</code>.
+</p>
+</dd>
+<dt><code>braceexpand</code></dt>
+<dd><p>Same as <code>-B</code>.
+</p>
+</dd>
+<dt><code>emacs</code></dt>
+<dd><p>Use an <code>emacs</code>-style line editing interface (see <a href="#Command-Line-Editing">Command Line Editing</a>).
+This also affects the editing interface used for <code>read -e</code>.
+</p>
+</dd>
+<dt><code>errexit</code></dt>
+<dd><p>Same as <code>-e</code>.
+</p>
+</dd>
+<dt><code>errtrace</code></dt>
+<dd><p>Same as <code>-E</code>.
+</p>
+</dd>
+<dt><code>functrace</code></dt>
+<dd><p>Same as <code>-T</code>.
+</p>
+</dd>
+<dt><code>hashall</code></dt>
+<dd><p>Same as <code>-h</code>.
+</p>
+</dd>
+<dt><code>histexpand</code></dt>
+<dd><p>Same as <code>-H</code>.
+</p>
+</dd>
+<dt><code>history</code></dt>
+<dd><p>Enable command history, as described in <a href="#Bash-History-Facilities">Bash History Facilities</a>.
+This option is on by default in interactive shells.
+</p>
+</dd>
+<dt><code>ignoreeof</code></dt>
+<dd><p>An interactive shell will not exit upon reading EOF.
+</p>
+</dd>
+<dt><code>keyword</code></dt>
+<dd><p>Same as <code>-k</code>.
+</p>
+</dd>
+<dt><code>monitor</code></dt>
+<dd><p>Same as <code>-m</code>.
+</p>
+</dd>
+<dt><code>noclobber</code></dt>
+<dd><p>Same as <code>-C</code>.
+</p>
+</dd>
+<dt><code>noexec</code></dt>
+<dd><p>Same as <code>-n</code>.
+</p>
+</dd>
+<dt><code>noglob</code></dt>
+<dd><p>Same as <code>-f</code>.
+</p>
+</dd>
+<dt><code>nolog</code></dt>
+<dd><p>Currently ignored.
+</p>
+</dd>
+<dt><code>notify</code></dt>
+<dd><p>Same as <code>-b</code>.
+</p>
+</dd>
+<dt><code>nounset</code></dt>
+<dd><p>Same as <code>-u</code>.
+</p>
+</dd>
+<dt><code>onecmd</code></dt>
+<dd><p>Same as <code>-t</code>.
+</p>
+</dd>
+<dt><code>physical</code></dt>
+<dd><p>Same as <code>-P</code>.
+</p>
+</dd>
+<dt><code>pipefail</code></dt>
+<dd><p>If set, the return value of a pipeline is the value of the last
+(rightmost) command to exit with a non-zero status, or zero if all
+commands in the pipeline exit successfully.
+This option is disabled by default.
+</p>
+</dd>
+<dt><code>posix</code></dt>
+<dd><p>Change the behavior of Bash where the default operation differs
+from the <small>POSIX</small> standard to match the standard
+(see <a href="#Bash-POSIX-Mode">Bash POSIX Mode</a>).
+This is intended to make Bash behave as a strict superset of that
+standard.
+</p>
+</dd>
+<dt><code>privileged</code></dt>
+<dd><p>Same as <code>-p</code>.
+</p>
+</dd>
+<dt><code>verbose</code></dt>
+<dd><p>Same as <code>-v</code>.
+</p>
+</dd>
+<dt><code>vi</code></dt>
+<dd><p>Use a <code>vi</code>-style line editing interface.
+This also affects the editing interface used for <code>read -e</code>.
+</p>
+</dd>
+<dt><code>xtrace</code></dt>
+<dd><p>Same as <code>-x</code>.
+</p></dd>
+</dl>
+
+</dd>
+<dt><code>-p</code></dt>
+<dd><p>Turn on privileged mode.
+In this mode, the <code>$BASH_ENV</code> and <code>$ENV</code> files are not
+processed, shell functions are not inherited from the environment,
+and the <code>SHELLOPTS</code>, <code>BASHOPTS</code>, <code>CDPATH</code> and <code>GLOBIGNORE</code>
+variables, if they appear in the environment, are ignored.
+If the shell is started with the effective user (group) id not equal to the
+real user (group) id, and the <samp>-p</samp> option is not supplied, these actions
+are taken and the effective user id is set to the real user id.
+If the <samp>-p</samp> option is supplied at startup, the effective user id is
+not reset.
+Turning this option off causes the effective user
+and group ids to be set to the real user and group ids.
+</p>
+</dd>
+<dt><code>-t</code></dt>
+<dd><p>Exit after reading and executing one command.
+</p>
+</dd>
+<dt><code>-u</code></dt>
+<dd><p>Treat unset variables and parameters other than the special parameters
+&lsquo;<samp>@</samp>&rsquo; or &lsquo;<samp>*</samp>&rsquo; as an error when performing parameter expansion.
+An error message will be written to the standard error, and a non-interactive
+shell will exit.
+</p>
+</dd>
+<dt><code>-v</code></dt>
+<dd><p>Print shell input lines as they are read.
+</p>
+</dd>
+<dt><code>-x</code></dt>
+<dd><p>Print a trace of simple commands, <code>for</code> commands, <code>case</code>
+commands, <code>select</code> commands, and arithmetic <code>for</code> commands
+and their arguments or associated word lists after they are
+expanded and before they are executed.  The value of the <code>PS4</code>
+variable is expanded and the resultant value is printed before
+the command and its expanded arguments.
+</p>
+</dd>
+<dt><code>-B</code></dt>
+<dd><p>The shell will perform brace expansion (see <a href="#Brace-Expansion">Brace Expansion</a>).
+This option is on by default.
+</p>
+</dd>
+<dt><code>-C</code></dt>
+<dd><p>Prevent output redirection using &lsquo;<samp>&gt;</samp>&rsquo;, &lsquo;<samp>&gt;&amp;</samp>&rsquo;, and &lsquo;<samp>&lt;&gt;</samp>&rsquo;
+from overwriting existing files.
+</p>
+</dd>
+<dt><code>-E</code></dt>
+<dd><p>If set, any trap on <code>ERR</code> is inherited by shell functions, command
+substitutions, and commands executed in a subshell environment.
+The <code>ERR</code> trap is normally not inherited in such cases.
+</p>
+</dd>
+<dt><code>-H</code></dt>
+<dd><p>Enable &lsquo;<samp>!</samp>&rsquo; style history substitution (see <a href="#History-Interaction">History Interaction</a>).
+This option is on by default for interactive shells.
+</p>
+</dd>
+<dt><code>-P</code></dt>
+<dd><p>If set, do not resolve symbolic links when performing commands such as
+<code>cd</code> which change the current directory.  The physical directory
+is used instead.  By default, Bash follows
+the logical chain of directories when performing commands
+which change the current directory.
+</p>
+<p>For example, if <samp>/usr/sys</samp> is a symbolic link to <samp>/usr/local/sys</samp>
+then:
+</p><div class="example">
+<pre class="example">$ cd /usr/sys; echo $PWD
+/usr/sys
+$ cd ..; pwd
+/usr
+</pre></div>
+
+<p>If <code>set -P</code> is on, then:
+</p><div class="example">
+<pre class="example">$ cd /usr/sys; echo $PWD
+/usr/local/sys
+$ cd ..; pwd
+/usr/local
+</pre></div>
+
+</dd>
+<dt><code>-T</code></dt>
+<dd><p>If set, any trap on <code>DEBUG</code> and <code>RETURN</code> are inherited by
+shell functions, command substitutions, and commands executed
+in a subshell environment.
+The <code>DEBUG</code> and <code>RETURN</code> traps are normally not inherited
+in such cases.
+</p>
+</dd>
+<dt><code>--</code></dt>
+<dd><p>If no arguments follow this option, then the positional parameters are
+unset.  Otherwise, the positional parameters are set to the
+<var>arguments</var>, even if some of them begin with a &lsquo;<samp>-</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>-</code></dt>
+<dd><p>Signal the end of options, cause all remaining <var>arguments</var>
+to be assigned to the positional parameters.  The <samp>-x</samp>
+and <samp>-v</samp>  options are turned off.
+If there are no arguments, the positional parameters remain unchanged.
+</p></dd>
+</dl>
+
+<p>Using &lsquo;<samp>+</samp>&rsquo; rather than &lsquo;<samp>-</samp>&rsquo; causes these options to be
+turned off.  The options can also be used upon invocation of the
+shell.  The current set of options may be found in <code>$-</code>.
+</p>
+<p>The remaining N <var>arguments</var> are positional parameters and are
+assigned, in order, to <code>$1</code>, <code>$2</code>, &hellip;  <code>$N</code>.
+The special parameter <code>#</code> is set to N.
+</p>
+<p>The return status is always zero unless an invalid option is supplied.
+</p></dd>
+</dl>
+
+<hr>
+<span id="The-Shopt-Builtin"></span><div class="header">
+<p>
+Previous: <a href="#The-Set-Builtin" accesskey="p" rel="prev">The Set Builtin</a>, Up: <a href="#Modifying-Shell-Behavior" accesskey="u" rel="up">Modifying Shell Behavior</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="The-Shopt-Builtin-1"></span><h4 class="subsection">4.3.2 The Shopt Builtin</h4>
+
+<p>This builtin allows you to change additional shell optional behavior.
+</p>
+<dl compact="compact">
+<dt><code>shopt</code></dt>
+<dd><span id="index-shopt"></span>
+<div class="example">
+<pre class="example">shopt [-pqsu] [-o] [<var>optname</var> &hellip;]
+</pre></div>
+
+<p>Toggle the values of settings controlling optional shell behavior.
+The settings can be either those listed below, or, if the
+<samp>-o</samp> option is used, those available with the <samp>-o</samp>
+option to the <code>set</code> builtin command (see <a href="#The-Set-Builtin">The Set Builtin</a>).
+With no options, or with the <samp>-p</samp> option, a list of all settable
+options is displayed, with an indication of whether or not each is set;
+if <var>optnames</var> are supplied, the output is restricted to those options.
+The <samp>-p</samp> option causes output to be displayed in a form that
+may be reused as input.
+Other options have the following meanings:
+</p>
+<dl compact="compact">
+<dt><code>-s</code></dt>
+<dd><p>Enable (set) each <var>optname</var>.
+</p>
+</dd>
+<dt><code>-u</code></dt>
+<dd><p>Disable (unset) each <var>optname</var>.
+</p>
+</dd>
+<dt><code>-q</code></dt>
+<dd><p>Suppresses normal output; the return status
+indicates whether the <var>optname</var> is set or unset.
+If multiple <var>optname</var> arguments are given with <samp>-q</samp>,
+the return status is zero if all <var>optnames</var> are enabled;
+non-zero otherwise.
+</p>
+</dd>
+<dt><code>-o</code></dt>
+<dd><p>Restricts the values of
+<var>optname</var> to be those defined for the <samp>-o</samp> option to the
+<code>set</code> builtin (see <a href="#The-Set-Builtin">The Set Builtin</a>).
+</p></dd>
+</dl>
+
+<p>If either <samp>-s</samp> or <samp>-u</samp>
+is used with no <var>optname</var> arguments, <code>shopt</code> shows only
+those options which are set or unset, respectively.
+</p>
+<p>Unless otherwise noted, the <code>shopt</code> options are disabled (off)
+by default.
+</p>
+<p>The return status when listing options is zero if all <var>optnames</var>
+are enabled, non-zero otherwise.  When setting or unsetting options,
+the return status is zero unless an <var>optname</var> is not a valid shell
+option.
+</p>
+<p>The list of <code>shopt</code> options is:
+</p><dl compact="compact">
+<dt><code>assoc_expand_once</code></dt>
+<dd><p>If set, the shell suppresses multiple evaluation of associative array
+subscripts during arithmetic expression evaluation, while executing
+builtins that can perform variable assignments,
+and while executing builtins that perform array dereferencing.
+</p>
+</dd>
+<dt><code>autocd</code></dt>
+<dd><p>If set, a command name that is the name of a directory is executed as if
+it were the argument to the <code>cd</code> command.
+This option is only used by interactive shells.
+</p>
+</dd>
+<dt><code>cdable_vars</code></dt>
+<dd><p>If this is set, an argument to the <code>cd</code> builtin command that
+is not a directory is assumed to be the name of a variable whose
+value is the directory to change to.
+</p>
+</dd>
+<dt><code>cdspell</code></dt>
+<dd><p>If set, minor errors in the spelling of a directory component in a
+<code>cd</code> command will be corrected.
+The errors checked for are transposed characters,
+a missing character, and a character too many.
+If a correction is found, the corrected path is printed,
+and the command proceeds.
+This option is only used by interactive shells.
+</p>
+</dd>
+<dt><code>checkhash</code></dt>
+<dd><p>If this is set, Bash checks that a command found in the hash
+table exists before trying to execute it.  If a hashed command no
+longer exists, a normal path search is performed.
+</p>
+</dd>
+<dt><code>checkjobs</code></dt>
+<dd><p>If set, Bash lists the status of any stopped and running jobs before
+exiting an interactive shell.  If any jobs are running, this causes
+the exit to be deferred until a second exit is attempted without an
+intervening command (see <a href="#Job-Control">Job Control</a>).
+The shell always postpones exiting if any jobs are stopped.
+</p>
+</dd>
+<dt><code>checkwinsize</code></dt>
+<dd><p>If set, Bash checks the window size after each external (non-builtin)
+command and, if necessary, updates the values of    
+<code>LINES</code> and <code>COLUMNS</code>.
+This option is enabled by default.
+</p>
+</dd>
+<dt><code>cmdhist</code></dt>
+<dd><p>If set, Bash
+attempts to save all lines of a multiple-line
+command in the same history entry.  This allows
+easy re-editing of multi-line commands.
+This option is enabled by default, but only has an effect if command
+history is enabled (see <a href="#Bash-History-Facilities">Bash History Facilities</a>).
+</p>
+</dd>
+<dt><code>compat31</code></dt>
+<dt><code>compat32</code></dt>
+<dt><code>compat40</code></dt>
+<dt><code>compat41</code></dt>
+<dt><code>compat42</code></dt>
+<dt><code>compat43</code></dt>
+<dt><code>compat44</code></dt>
+<dd><p>These control aspects of the shell&rsquo;s compatibility mode
+(see <a href="#Shell-Compatibility-Mode">Shell Compatibility Mode</a>).
+</p>
+</dd>
+<dt><code>complete_fullquote</code></dt>
+<dd><p>If set, Bash
+quotes all shell metacharacters in filenames and directory names when
+performing completion.
+If not set, Bash
+removes metacharacters such as the dollar sign from the set of
+characters that will be quoted in completed filenames
+when these metacharacters appear in shell variable references in words to be
+completed.
+This means that dollar signs in variable names that expand to directories
+will not be quoted;
+however, any dollar signs appearing in filenames will not be quoted, either.
+This is active only when bash is using backslashes to quote completed
+filenames.
+This variable is set by default, which is the default Bash behavior in
+versions through 4.2.
+</p>
+</dd>
+<dt><code>direxpand</code></dt>
+<dd><p>If set, Bash
+replaces directory names with the results of word expansion when performing
+filename completion.  This changes the contents of the readline editing
+buffer.
+If not set, Bash attempts to preserve what the user typed.
+</p>
+</dd>
+<dt><code>dirspell</code></dt>
+<dd><p>If set, Bash
+attempts spelling correction on directory names during word completion 
+if the directory name initially supplied does not exist.
+</p>
+</dd>
+<dt><code>dotglob</code></dt>
+<dd><p>If set, Bash includes filenames beginning with a &lsquo;.&rsquo; in
+the results of filename expansion.
+The filenames &lsquo;<samp>.</samp>&rsquo; and &lsquo;<samp>..</samp>&rsquo; must always be matched explicitly,
+even if <code>dotglob</code> is set.
+</p>
+</dd>
+<dt><code>execfail</code></dt>
+<dd><p>If this is set, a non-interactive shell will not exit if
+it cannot execute the file specified as an argument to the <code>exec</code>
+builtin command.  An interactive shell does not exit if <code>exec</code>
+fails.
+</p>
+</dd>
+<dt><code>expand_aliases</code></dt>
+<dd><p>If set, aliases are expanded as described below under Aliases,
+<a href="#Aliases">Aliases</a>.
+This option is enabled by default for interactive shells.
+</p>
+</dd>
+<dt><code>extdebug</code></dt>
+<dd><p>If set at shell invocation,
+or in a shell startup file,
+arrange to execute the debugger profile
+before the shell starts, identical to the <samp>--debugger</samp> option.
+If set after invocation, behavior intended for use by debuggers is enabled:
+</p>
+<ol>
+<li> The <samp>-F</samp> option to the <code>declare</code> builtin (see <a href="#Bash-Builtins">Bash Builtins</a>)
+displays the source file name and line number corresponding to each function
+name supplied as an argument.
+
+</li><li> If the command run by the <code>DEBUG</code> trap returns a non-zero value, the
+next command is skipped and not executed.
+
+</li><li> If the command run by the <code>DEBUG</code> trap returns a value of 2, and the
+shell is executing in a subroutine (a shell function or a shell script
+executed by the <code>.</code> or <code>source</code> builtins), the shell simulates
+a call to <code>return</code>.
+
+</li><li> <code>BASH_ARGC</code> and <code>BASH_ARGV</code> are updated as described in their
+descriptions (see <a href="#Bash-Variables">Bash Variables</a>).
+
+</li><li> Function tracing is enabled: command substitution, shell functions, and
+subshells invoked with <code>( <var>command</var> )</code> inherit the
+<code>DEBUG</code> and <code>RETURN</code> traps.
+
+</li><li> Error tracing is enabled: command substitution, shell functions, and
+subshells invoked with <code>( <var>command</var> )</code> inherit the
+<code>ERR</code> trap.
+</li></ol>
+
+</dd>
+<dt><code>extglob</code></dt>
+<dd><p>If set, the extended pattern matching features described above
+(see <a href="#Pattern-Matching">Pattern Matching</a>) are enabled.
+</p>
+</dd>
+<dt><code>extquote</code></dt>
+<dd><p>If set, <code>$'<var>string</var>'</code> and <code>$&quot;<var>string</var>&quot;</code> quoting is  
+performed within <code>${<var>parameter</var>}</code> expansions                     
+enclosed in double quotes.  This option is enabled by default. 
+</p>
+</dd>
+<dt><code>failglob</code></dt>
+<dd><p>If set, patterns which fail to match filenames during filename expansion
+result in an expansion error.
+</p>
+</dd>
+<dt><code>force_fignore</code></dt>
+<dd><p>If set, the suffixes specified by the <code>FIGNORE</code> shell variable
+cause words to be ignored when performing word completion even if
+the ignored words are the only possible completions.
+See <a href="#Bash-Variables">Bash Variables</a>, for a description of <code>FIGNORE</code>.
+This option is enabled by default.
+</p>
+</dd>
+<dt><code>globasciiranges</code></dt>
+<dd><p>If set, range expressions used in pattern matching bracket expressions
+(see <a href="#Pattern-Matching">Pattern Matching</a>)
+behave as if in the traditional C locale when performing
+comparisons.  That is, the current locale&rsquo;s collating sequence
+is not taken into account, so
+&lsquo;<samp>b</samp>&rsquo; will not collate between &lsquo;<samp>A</samp>&rsquo; and &lsquo;<samp>B</samp>&rsquo;,
+and upper-case and lower-case ASCII characters will collate together.   
+</p>
+</dd>
+<dt><code>globstar</code></dt>
+<dd><p>If set, the pattern &lsquo;<samp>**</samp>&rsquo; used in a filename expansion context will
+match all files and zero or more directories and subdirectories.
+If the pattern is followed by a &lsquo;<samp>/</samp>&rsquo;, only directories and
+subdirectories match.
+</p>
+</dd>
+<dt><code>gnu_errfmt</code></dt>
+<dd><p>If set, shell error messages are written in the standard <small>GNU</small> error
+message format.
+</p>
+</dd>
+<dt><code>histappend</code></dt>
+<dd><p>If set, the history list is appended to the file named by the value
+of the <code>HISTFILE</code>
+variable when the shell exits, rather than overwriting the file.
+</p>
+</dd>
+<dt><code>histreedit</code></dt>
+<dd><p>If set, and Readline
+is being used, a user is given the opportunity to re-edit a
+failed history substitution.
+</p>
+</dd>
+<dt><code>histverify</code></dt>
+<dd><p>If set, and Readline
+is being used, the results of history substitution are not immediately
+passed to the shell parser.  Instead, the resulting line is loaded into
+the Readline editing buffer, allowing further modification.
+</p>
+</dd>
+<dt><code>hostcomplete</code></dt>
+<dd><p>If set, and Readline is being used, Bash will attempt to perform
+hostname completion when a word containing a &lsquo;<samp>@</samp>&rsquo; is being
+completed (see <a href="#Commands-For-Completion">Commands For Completion</a>).  This option is enabled
+by default.
+</p>
+</dd>
+<dt><code>huponexit</code></dt>
+<dd><p>If set, Bash will send <code>SIGHUP</code> to all jobs when an interactive
+login shell exits (see <a href="#Signals">Signals</a>).
+</p>
+</dd>
+<dt><code>inherit_errexit</code></dt>
+<dd><p>If set, command substitution inherits the value of the <code>errexit</code> option,
+instead of unsetting it in the subshell environment.
+This option is enabled when <small>POSIX</small> mode is enabled.
+</p>
+</dd>
+<dt><code>interactive_comments</code></dt>
+<dd><p>Allow a word beginning with &lsquo;<samp>#</samp>&rsquo;
+to cause that word and all remaining characters on that
+line to be ignored in an interactive shell.
+This option is enabled by default.
+</p>
+</dd>
+<dt><code>lastpipe</code></dt>
+<dd><p>If set, and job control is not active, the shell runs the last command of
+a pipeline not executed in the background in the current shell environment.
+</p>
+</dd>
+<dt><code>lithist</code></dt>
+<dd><p>If enabled, and the <code>cmdhist</code>
+option is enabled, multi-line commands are saved to the history with
+embedded newlines rather than using semicolon separators where possible.
+</p>
+</dd>
+<dt><code>localvar_inherit</code></dt>
+<dd><p>If set, local variables inherit the value and attributes of a variable of
+the same name that exists at a previous scope before any new value is
+assigned.  The <var>nameref</var> attribute is not inherited.
+</p>
+</dd>
+<dt><code>localvar_unset</code></dt>
+<dd><p>If set, calling <code>unset</code> on local variables in previous function scopes
+marks them so subsequent lookups find them unset until that function
+returns. This is identical to the behavior of unsetting local variables
+at the current function scope.
+</p>
+</dd>
+<dt><code>login_shell</code></dt>
+<dd><p>The shell sets this option if it is started as a login shell
+(see <a href="#Invoking-Bash">Invoking Bash</a>).
+The value may not be changed.
+</p>
+</dd>
+<dt><code>mailwarn</code></dt>
+<dd><p>If set, and a file that Bash is checking for mail has been
+accessed since the last time it was checked, the message
+<code>&quot;The mail in <var>mailfile</var> has been read&quot;</code> is displayed.
+</p>
+</dd>
+<dt><code>no_empty_cmd_completion</code></dt>
+<dd><p>If set, and Readline is being used, Bash will not attempt to search
+the <code>PATH</code> for possible completions when completion is attempted
+on an empty line.
+</p>
+</dd>
+<dt><code>nocaseglob</code></dt>
+<dd><p>If set, Bash matches filenames in a case-insensitive fashion when
+performing filename expansion.
+</p>
+</dd>
+<dt><code>nocasematch</code></dt>
+<dd><p>If set, Bash matches patterns in a case-insensitive fashion when
+performing matching while executing <code>case</code> or <code>[[</code>
+conditional commands,
+when performing pattern substitution word expansions,
+or when filtering possible completions as part of programmable completion.
+</p>
+</dd>
+<dt><code>nullglob</code></dt>
+<dd><p>If set, Bash allows filename patterns which match no
+files to expand to a null string, rather than themselves.
+</p>
+</dd>
+<dt><code>progcomp</code></dt>
+<dd><p>If set, the programmable completion facilities
+(see <a href="#Programmable-Completion">Programmable Completion</a>) are enabled.
+This option is enabled by default.
+</p>
+</dd>
+<dt><code>progcomp_alias</code></dt>
+<dd><p>If set, and programmable completion is enabled, Bash treats a command
+name that doesn&rsquo;t have any completions as a possible alias and attempts
+alias expansion. If it has an alias, Bash attempts programmable
+completion using the command word resulting from the expanded alias.
+</p>
+</dd>
+<dt><code>promptvars</code></dt>
+<dd><p>If set, prompt strings undergo
+parameter expansion, command substitution, arithmetic
+expansion, and quote removal after being expanded
+as described below (see <a href="#Controlling-the-Prompt">Controlling the Prompt</a>).
+This option is enabled by default.
+</p>
+</dd>
+<dt><code>restricted_shell</code></dt>
+<dd><p>The shell sets this option if it is started in restricted mode
+(see <a href="#The-Restricted-Shell">The Restricted Shell</a>).
+The value may not be changed.
+This is not reset when the startup files are executed, allowing
+the startup files to discover whether or not a shell is restricted.
+</p>
+</dd>
+<dt><code>shift_verbose</code></dt>
+<dd><p>If this is set, the <code>shift</code>
+builtin prints an error message when the shift count exceeds the
+number of positional parameters.
+</p>
+</dd>
+<dt><code>sourcepath</code></dt>
+<dd><p>If set, the <code>source</code> builtin uses the value of <code>PATH</code>
+to find the directory containing the file supplied as an argument.
+This option is enabled by default.
+</p>
+</dd>
+<dt><code>xpg_echo</code></dt>
+<dd><p>If set, the <code>echo</code> builtin expands backslash-escape sequences
+by default.
+</p>
+</dd>
+</dl>
+</dd>
+</dl>
+
+<hr>
+<span id="Special-Builtins"></span><div class="header">
+<p>
+Previous: <a href="#Modifying-Shell-Behavior" accesskey="p" rel="prev">Modifying Shell Behavior</a>, Up: <a href="#Shell-Builtin-Commands" accesskey="u" rel="up">Shell Builtin Commands</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Special-Builtins-1"></span><h3 class="section">4.4 Special Builtins</h3>
+<span id="index-special-builtin-1"></span>
+
+<p>For historical reasons, the <small>POSIX</small> standard has classified
+several builtin commands as <em>special</em>.
+When Bash is executing in <small>POSIX</small> mode, the special builtins
+differ from other builtin commands in three respects:
+</p>
+<ol>
+<li> Special builtins are found before shell functions during command lookup.
+
+</li><li> If a special builtin returns an error status, a non-interactive shell exits.
+
+</li><li> Assignment statements preceding the command stay in effect in the shell
+environment after the command completes.
+</li></ol>
+
+<p>When Bash is not executing in <small>POSIX</small> mode, these builtins behave no
+differently than the rest of the Bash builtin commands.
+The Bash <small>POSIX</small> mode is described in <a href="#Bash-POSIX-Mode">Bash POSIX Mode</a>. 
+</p>
+<p>These are the <small>POSIX</small> special builtins:
+</p><div class="example">
+<pre class="example">break : . continue eval exec exit export readonly return set<!-- /@w -->
+shift trap unset<!-- /@w -->
+</pre></div>
+
+<hr>
+<span id="Shell-Variables"></span><div class="header">
+<p>
+Next: <a href="#Bash-Features" accesskey="n" rel="next">Bash Features</a>, Previous: <a href="#Shell-Builtin-Commands" accesskey="p" rel="prev">Shell Builtin Commands</a>, Up: <a href="#Top" accesskey="u" rel="up">Top</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Shell-Variables-1"></span><h2 class="chapter">5 Shell Variables</h2>
+
+<table class="menu" border="0" cellspacing="0">
+<tr><td align="left" valign="top">&bull; <a href="#Bourne-Shell-Variables" accesskey="1">Bourne Shell Variables</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Variables which Bash uses in the same way
+				as the Bourne Shell.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Bash-Variables" accesskey="2">Bash Variables</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">List of variables that exist in Bash.
+</td></tr>
+</table>
+
+<p>This chapter describes the shell variables that Bash uses.
+Bash automatically assigns default values to a number of variables.
+</p>
+<hr>
+<span id="Bourne-Shell-Variables"></span><div class="header">
+<p>
+Next: <a href="#Bash-Variables" accesskey="n" rel="next">Bash Variables</a>, Up: <a href="#Shell-Variables" accesskey="u" rel="up">Shell Variables</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Bourne-Shell-Variables-1"></span><h3 class="section">5.1 Bourne Shell Variables</h3>
+
+<p>Bash uses certain shell variables in the same way as the Bourne shell.
+In some cases, Bash assigns a default value to the variable.
+</p>
+<dl compact="compact">
+<dt><code>CDPATH</code>
+<span id="index-CDPATH"></span>
+</dt>
+<dd><p>A colon-separated list of directories used as a search path for
+the <code>cd</code> builtin command.
+</p>
+</dd>
+<dt><code>HOME</code>
+<span id="index-HOME"></span>
+</dt>
+<dd><p>The current user&rsquo;s home directory; the default for the <code>cd</code> builtin
+command.
+The value of this variable is also used by tilde expansion
+(see <a href="#Tilde-Expansion">Tilde Expansion</a>).
+</p>
+</dd>
+<dt><code>IFS</code>
+<span id="index-IFS"></span>
+</dt>
+<dd><p>A list of characters that separate fields; used when the shell splits
+words as part of expansion.
+</p>
+</dd>
+<dt><code>MAIL</code>
+<span id="index-MAIL"></span>
+</dt>
+<dd><p>If this parameter is set to a filename or directory name
+and the <code>MAILPATH</code> variable
+is not set, Bash informs the user of the arrival of mail in
+the specified file or Maildir-format directory.
+</p>
+</dd>
+<dt><code>MAILPATH</code>
+<span id="index-MAILPATH"></span>
+</dt>
+<dd><p>A colon-separated list of filenames which the shell periodically checks
+for new mail.
+Each list entry can specify the message that is printed when new mail
+arrives in the mail file by separating the filename from the message with
+a &lsquo;<samp>?</samp>&rsquo;.
+When used in the text of the message, <code>$_</code> expands to the name of
+the current mail file.
+</p>
+</dd>
+<dt><code>OPTARG</code>
+<span id="index-OPTARG"></span>
+</dt>
+<dd><p>The value of the last option argument processed by the <code>getopts</code> builtin.
+</p>
+</dd>
+<dt><code>OPTIND</code>
+<span id="index-OPTIND"></span>
+</dt>
+<dd><p>The index of the last option argument processed by the <code>getopts</code> builtin.
+</p>
+</dd>
+<dt><code>PATH</code>
+<span id="index-PATH"></span>
+</dt>
+<dd><p>A colon-separated list of directories in which the shell looks for
+commands.
+A zero-length (null) directory name in the value of <code>PATH</code> indicates the
+current directory.
+A null directory name may appear as two adjacent colons, or as an initial
+or trailing colon.
+</p>
+</dd>
+<dt><code>PS1</code>
+<span id="index-PS1"></span>
+</dt>
+<dd><p>The primary prompt string.  The default value is &lsquo;<samp>\s-\v\$ </samp>&rsquo;.
+See <a href="#Controlling-the-Prompt">Controlling the Prompt</a>, for the complete list of escape
+sequences that are expanded before <code>PS1</code> is displayed.
+</p>
+</dd>
+<dt><code>PS2</code>
+<span id="index-PS2"></span>
+</dt>
+<dd><p>The secondary prompt string.  The default value is &lsquo;<samp>&gt; </samp>&rsquo;.
+<code>PS2</code> is expanded in the same way as <code>PS1</code> before being
+displayed.
+</p>
+</dd>
+</dl>
+
+<hr>
+<span id="Bash-Variables"></span><div class="header">
+<p>
+Previous: <a href="#Bourne-Shell-Variables" accesskey="p" rel="prev">Bourne Shell Variables</a>, Up: <a href="#Shell-Variables" accesskey="u" rel="up">Shell Variables</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Bash-Variables-1"></span><h3 class="section">5.2 Bash Variables</h3>
+
+<p>These variables are set or used by Bash, but other shells
+do not normally treat them specially.
+</p>
+<p>A few variables used by Bash are described in different chapters:
+variables for controlling the job control facilities
+(see <a href="#Job-Control-Variables">Job Control Variables</a>).
+</p>
+<dl compact="compact">
+<dt><code>_</code>
+<span id="index-_005f"></span>
+</dt>
+<dd><span id="index-_0024_005f"></span>
+<p>($_, an underscore.)
+At shell startup, set to the pathname used to invoke the
+shell or shell script being executed as passed in the environment
+or argument list.
+Subsequently, expands to the last argument to the previous simple
+command executed in the foreground, after expansion. 
+Also set to the full pathname used to invoke each command executed
+and placed in the environment exported to that command.
+When checking mail, this parameter holds the name of the mail file.
+</p>
+</dd>
+<dt><code>BASH</code>
+<span id="index-BASH"></span>
+</dt>
+<dd><p>The full pathname used to execute the current instance of Bash.
+</p>
+</dd>
+<dt><code>BASHOPTS</code>
+<span id="index-BASHOPTS"></span>
+</dt>
+<dd><p>A colon-separated list of enabled shell options.  Each word in
+the list is a valid argument for the <samp>-s</samp> option to the
+<code>shopt</code> builtin command (see <a href="#The-Shopt-Builtin">The Shopt Builtin</a>).
+The options appearing in <code>BASHOPTS</code> are those reported
+as &lsquo;<samp>on</samp>&rsquo; by &lsquo;<samp>shopt</samp>&rsquo;.
+If this variable is in the environment when Bash
+starts up, each shell option in the list will be enabled before
+reading any startup files.  This variable is readonly.
+</p>
+</dd>
+<dt><code>BASHPID</code>
+<span id="index-BASHPID"></span>
+</dt>
+<dd><p>Expands to the process ID of the current Bash process.
+This differs from <code>$$</code> under certain circumstances, such as subshells
+that do not require Bash to be re-initialized.
+Assignments to <code>BASHPID</code> have no effect.
+If <code>BASHPID</code>
+is unset, it loses its special properties, even if it is
+subsequently reset.
+</p>
+</dd>
+<dt><code>BASH_ALIASES</code>
+<span id="index-BASH_005fALIASES"></span>
+</dt>
+<dd><p>An associative array variable whose members correspond to the internal
+list of aliases as maintained by the <code>alias</code> builtin.
+(see <a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a>).
+Elements added to this array appear in the alias list; however,
+unsetting array elements currently does not cause aliases to be removed
+from the alias list.
+If <code>BASH_ALIASES</code>
+is unset, it loses its special properties, even if it is
+subsequently reset.
+</p>
+</dd>
+<dt><code>BASH_ARGC</code>
+<span id="index-BASH_005fARGC"></span>
+</dt>
+<dd><p>An array variable whose values are the number of parameters in each
+frame of the current bash execution call stack.  The number of
+parameters to the current subroutine (shell function or script executed
+with <code>.</code> or <code>source</code>) is at the top of the stack.  When a
+subroutine is executed, the number of parameters passed is pushed onto
+<code>BASH_ARGC</code>.
+The shell sets <code>BASH_ARGC</code> only when in extended debugging mode
+(see <a href="#The-Shopt-Builtin">The Shopt Builtin</a>
+for a description of the <code>extdebug</code> option to the <code>shopt</code>
+builtin).
+Setting <code>extdebug</code> after the shell has started to execute a script,
+or referencing this variable when <code>extdebug</code> is not set,
+may result in inconsistent values.
+</p>
+</dd>
+<dt><code>BASH_ARGV</code>
+<span id="index-BASH_005fARGV"></span>
+</dt>
+<dd><p>An array variable containing all of the parameters in the current bash
+execution call stack.  The final parameter of the last subroutine call
+is at the top of the stack; the first parameter of the initial call is
+at the bottom.  When a subroutine is executed, the parameters supplied
+are pushed onto <code>BASH_ARGV</code>.
+The shell sets <code>BASH_ARGV</code> only when in extended debugging mode
+(see <a href="#The-Shopt-Builtin">The Shopt Builtin</a>
+for a description of the <code>extdebug</code> option to the <code>shopt</code>
+builtin).
+Setting <code>extdebug</code> after the shell has started to execute a script,
+or referencing this variable when <code>extdebug</code> is not set,
+may result in inconsistent values.
+</p>
+</dd>
+<dt><code>BASH_ARGV0</code>
+<span id="index-BASH_005fARGV0"></span>
+</dt>
+<dd><p>When referenced, this variable expands to the name of the shell or shell
+script (identical to <code>$0</code>; See <a href="#Special-Parameters">Special Parameters</a>,
+for the description of special parameter 0).
+Assignment to <code>BASH_ARGV0</code>
+causes the value assigned to also be assigned to <code>$0</code>.
+If <code>BASH_ARGV0</code>
+is unset, it loses its special properties, even if it is
+subsequently reset.
+</p>
+</dd>
+<dt><code>BASH_CMDS</code>
+<span id="index-BASH_005fCMDS"></span>
+</dt>
+<dd><p>An associative array variable whose members correspond to the internal
+hash table of commands as maintained by the <code>hash</code> builtin
+(see <a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a>).
+Elements added to this array appear in the hash table; however,
+unsetting array elements currently does not cause command names to be removed
+from the hash table.
+If <code>BASH_CMDS</code>
+is unset, it loses its special properties, even if it is
+subsequently reset.
+</p>
+</dd>
+<dt><code>BASH_COMMAND</code>
+<span id="index-BASH_005fCOMMAND"></span>
+</dt>
+<dd><p>The command currently being executed or about to be executed, unless the
+shell is executing a command as the result of a trap,
+in which case it is the command executing at the time of the trap.
+If <code>BASH_COMMAND</code>
+is unset, it loses its special properties, even if it is
+subsequently reset.
+</p>
+</dd>
+<dt><code>BASH_COMPAT</code>
+<span id="index-BASH_005fCOMPAT"></span>
+</dt>
+<dd><p>The value is used to set the shell&rsquo;s compatibility level.
+See <a href="#Shell-Compatibility-Mode">Shell Compatibility Mode</a>, for a description of the various
+compatibility levels and their effects.
+The value may be a decimal number (e.g., 4.2) or an integer (e.g., 42)
+corresponding to the desired compatibility level.
+If <code>BASH_COMPAT</code> is unset or set to the empty string, the compatibility
+level is set to the default for the current version.
+If <code>BASH_COMPAT</code> is set to a value that is not one of the valid
+compatibility levels, the shell prints an error message and sets the
+compatibility level to the default for the current version.
+The valid values correspond to the compatibility levels
+described below (see <a href="#Shell-Compatibility-Mode">Shell Compatibility Mode</a>).
+For example, 4.2 and 42 are valid values that correspond
+to the <code>compat42</code> <code>shopt</code> option
+and set the compatibility level to 42.
+The current version is also a valid value.
+</p>
+</dd>
+<dt><code>BASH_ENV</code>
+<span id="index-BASH_005fENV"></span>
+</dt>
+<dd><p>If this variable is set when Bash is invoked to execute a shell
+script, its value is expanded and used as the name of a startup file
+to read before executing the script.  See <a href="#Bash-Startup-Files">Bash Startup Files</a>.
+</p>
+</dd>
+<dt><code>BASH_EXECUTION_STRING</code>
+<span id="index-BASH_005fEXECUTION_005fSTRING"></span>
+</dt>
+<dd><p>The command argument to the <samp>-c</samp> invocation option.
+</p>
+</dd>
+<dt><code>BASH_LINENO</code>
+<span id="index-BASH_005fLINENO"></span>
+</dt>
+<dd><p>An array variable whose members are the line numbers in source files
+where each corresponding member of <var>FUNCNAME</var> was invoked.
+<code>${BASH_LINENO[$i]}</code> is the line number in the source file
+(<code>${BASH_SOURCE[$i+1]}</code>) where
+<code>${FUNCNAME[$i]}</code> was called (or <code>${BASH_LINENO[$i-1]}</code> if
+referenced within another shell function). 
+Use <code>LINENO</code> to obtain the current line number.
+</p>
+</dd>
+<dt><code>BASH_LOADABLES_PATH</code>
+<span id="index-BASH_005fLOADABLES_005fPATH"></span>
+</dt>
+<dd><p>A colon-separated list of directories in which the shell looks for
+dynamically loadable builtins specified by the
+<code>enable</code> command.
+</p>
+</dd>
+<dt><code>BASH_REMATCH</code>
+<span id="index-BASH_005fREMATCH"></span>
+</dt>
+<dd><p>An array variable whose members are assigned by the &lsquo;<samp>=~</samp>&rsquo; binary
+operator to the <code>[[</code> conditional command
+(see <a href="#Conditional-Constructs">Conditional Constructs</a>).
+The element with index 0 is the portion of the string
+matching the entire regular expression.
+The element with index <var>n</var> is the portion of the
+string matching the <var>n</var>th parenthesized subexpression.
+</p>
+</dd>
+<dt><code>BASH_SOURCE</code>
+<span id="index-BASH_005fSOURCE"></span>
+</dt>
+<dd><p>An array variable whose members are the source filenames where the
+corresponding shell function names in the <code>FUNCNAME</code> array
+variable are defined.
+The shell function <code>${FUNCNAME[$i]}</code> is defined in the file
+<code>${BASH_SOURCE[$i]}</code> and called from <code>${BASH_SOURCE[$i+1]}</code>
+</p>
+</dd>
+<dt><code>BASH_SUBSHELL</code>
+<span id="index-BASH_005fSUBSHELL"></span>
+</dt>
+<dd><p>Incremented by one within each subshell or subshell environment when
+the shell begins executing in that environment.
+The initial value is 0.
+If <code>BASH_SUBSHELL</code>
+is unset, it loses its special properties, even if it is
+subsequently reset.
+</p>
+</dd>
+<dt><code>BASH_VERSINFO</code>
+<span id="index-BASH_005fVERSINFO"></span>
+</dt>
+<dd><p>A readonly array variable (see <a href="#Arrays">Arrays</a>)
+whose members hold version information for this instance of Bash.
+The values assigned to the array members are as follows:
+</p>
+<dl compact="compact">
+<dt><code>BASH_VERSINFO[0]</code></dt>
+<dd><p>The major version number (the <var>release</var>).
+</p>
+</dd>
+<dt><code>BASH_VERSINFO[1]</code></dt>
+<dd><p>The minor version number (the <var>version</var>).
+</p>
+</dd>
+<dt><code>BASH_VERSINFO[2]</code></dt>
+<dd><p>The patch level.
+</p>
+</dd>
+<dt><code>BASH_VERSINFO[3]</code></dt>
+<dd><p>The build version.
+</p>
+</dd>
+<dt><code>BASH_VERSINFO[4]</code></dt>
+<dd><p>The release status (e.g., <var>beta1</var>).
+</p>
+</dd>
+<dt><code>BASH_VERSINFO[5]</code></dt>
+<dd><p>The value of <code>MACHTYPE</code>.
+</p></dd>
+</dl>
+
+</dd>
+<dt><code>BASH_VERSION</code>
+<span id="index-BASH_005fVERSION"></span>
+</dt>
+<dd><p>The version number of the current instance of Bash.
+</p>
+</dd>
+<dt><code>BASH_XTRACEFD</code>
+<span id="index-BASH_005fXTRACEFD"></span>
+</dt>
+<dd><p>If set to an integer corresponding to a valid file descriptor, Bash
+will write the trace output generated when &lsquo;<samp>set -x</samp>&rsquo;
+is enabled to that file descriptor.
+This allows tracing output to be separated from diagnostic and error
+messages.
+The file descriptor is closed when <code>BASH_XTRACEFD</code> is unset or assigned
+a new value.
+Unsetting <code>BASH_XTRACEFD</code> or assigning it the empty string causes the
+trace output to be sent to the standard error.
+Note that setting <code>BASH_XTRACEFD</code> to 2 (the standard error file
+descriptor) and then unsetting it will result in the standard error
+being closed.
+</p>
+</dd>
+<dt><code>CHILD_MAX</code>
+<span id="index-CHILD_005fMAX"></span>
+</dt>
+<dd><p>Set the number of exited child status values for the shell to remember.
+Bash will not allow this value to be decreased below a <small>POSIX</small>-mandated
+minimum, and there is a maximum value (currently 8192) that this may
+not exceed.
+The minimum value is system-dependent.
+</p>
+</dd>
+<dt><code>COLUMNS</code>
+<span id="index-COLUMNS"></span>
+</dt>
+<dd><p>Used by the <code>select</code> command to determine the terminal width
+when printing selection lists.
+Automatically set if the <code>checkwinsize</code> option is enabled
+(see <a href="#The-Shopt-Builtin">The Shopt Builtin</a>), or in an interactive shell upon receipt of a
+<code>SIGWINCH</code>.
+</p>
+</dd>
+<dt><code>COMP_CWORD</code>
+<span id="index-COMP_005fCWORD"></span>
+</dt>
+<dd><p>An index into <code>${COMP_WORDS}</code> of the word containing the current
+cursor position.
+This variable is available only in shell functions invoked by the
+programmable completion facilities (see <a href="#Programmable-Completion">Programmable Completion</a>).
+</p>
+</dd>
+<dt><code>COMP_LINE</code>
+<span id="index-COMP_005fLINE"></span>
+</dt>
+<dd><p>The current command line.
+This variable is available only in shell functions and external
+commands invoked by the
+programmable completion facilities (see <a href="#Programmable-Completion">Programmable Completion</a>).
+</p>
+</dd>
+<dt><code>COMP_POINT</code>
+<span id="index-COMP_005fPOINT"></span>
+</dt>
+<dd><p>The index of the current cursor position relative to the beginning of
+the current command.
+If the current cursor position is at the end of the current command,
+the value of this variable is equal to <code>${#COMP_LINE}</code>.
+This variable is available only in shell functions and external
+commands invoked by the
+programmable completion facilities (see <a href="#Programmable-Completion">Programmable Completion</a>).
+</p>
+</dd>
+<dt><code>COMP_TYPE</code>
+<span id="index-COMP_005fTYPE"></span>
+</dt>
+<dd><p>Set to an integer value corresponding to the type of completion attempted
+that caused a completion function to be called:
+<var>TAB</var>, for normal completion,
+&lsquo;<samp>?</samp>&rsquo;, for listing completions after successive tabs,
+&lsquo;<samp>!</samp>&rsquo;, for listing alternatives on partial word completion,
+&lsquo;<samp>@</samp>&rsquo;, to list completions if the word is not unmodified,
+or
+&lsquo;<samp>%</samp>&rsquo;, for menu completion.
+This variable is available only in shell functions and external
+commands invoked by the
+programmable completion facilities (see <a href="#Programmable-Completion">Programmable Completion</a>).
+</p>
+</dd>
+<dt><code>COMP_KEY</code>
+<span id="index-COMP_005fKEY"></span>
+</dt>
+<dd><p>The key (or final key of a key sequence) used to invoke the current
+completion function.
+</p>
+</dd>
+<dt><code>COMP_WORDBREAKS</code>
+<span id="index-COMP_005fWORDBREAKS"></span>
+</dt>
+<dd><p>The set of characters that the Readline library treats as word
+separators when performing word completion.
+If <code>COMP_WORDBREAKS</code>
+is unset, it loses its special properties,
+even if it is subsequently reset.
+</p>
+</dd>
+<dt><code>COMP_WORDS</code>
+<span id="index-COMP_005fWORDS"></span>
+</dt>
+<dd><p>An array variable consisting of the individual
+words in the current command line.
+The line is split into words as Readline would split it, using
+<code>COMP_WORDBREAKS</code> as described above.
+This variable is available only in shell functions invoked by the
+programmable completion facilities (see <a href="#Programmable-Completion">Programmable Completion</a>).
+</p>
+</dd>
+<dt><code>COMPREPLY</code>
+<span id="index-COMPREPLY"></span>
+</dt>
+<dd><p>An array variable from which Bash reads the possible completions
+generated by a shell function invoked by the programmable completion
+facility (see <a href="#Programmable-Completion">Programmable Completion</a>).
+Each array element contains one possible completion.
+</p>
+</dd>
+<dt><code>COPROC</code>
+<span id="index-COPROC"></span>
+</dt>
+<dd><p>An array variable created to hold the file descriptors
+for output from and input to an unnamed coprocess (see <a href="#Coprocesses">Coprocesses</a>).
+</p>
+</dd>
+<dt><code>DIRSTACK</code>
+<span id="index-DIRSTACK"></span>
+</dt>
+<dd><p>An array variable containing the current contents of the directory stack.
+Directories appear in the stack in the order they are displayed by the
+<code>dirs</code> builtin.
+Assigning to members of this array variable may be used to modify
+directories already in the stack, but the <code>pushd</code> and <code>popd</code>
+builtins must be used to add and remove directories.
+Assignment to this variable will not change the current directory.
+If <code>DIRSTACK</code>
+is unset, it loses its special properties, even if
+it is subsequently reset.
+</p>
+</dd>
+<dt><code>EMACS</code>
+<span id="index-EMACS"></span>
+</dt>
+<dd><p>If Bash finds this variable in the environment when the shell
+starts with value &lsquo;<samp>t</samp>&rsquo;, it assumes that the shell is running in an
+Emacs shell buffer and disables line editing.
+</p>
+</dd>
+<dt><code>ENV</code>
+<span id="index-ENV"></span>
+</dt>
+<dd><p>Expanded and executed similarlty to <code>BASH_ENV</code>
+(see <a href="#Bash-Startup-Files">Bash Startup Files</a>)
+when an interactive shell is invoked in
+<small>POSIX</small> Mode (see <a href="#Bash-POSIX-Mode">Bash POSIX Mode</a>).
+</p>
+</dd>
+<dt><code>EPOCHREALTIME</code>
+<span id="index-EPOCHREALTIME"></span>
+</dt>
+<dd><p>Each time this parameter is referenced, it expands to the number of seconds
+since the Unix Epoch as a floating point value with micro-second granularity
+(see the documentation for the C library function <var>time</var> for the
+definition of Epoch).
+Assignments to <code>EPOCHREALTIME</code> are ignored.
+If <code>EPOCHREALTIME</code>
+is unset, it loses its special properties, even if
+it is subsequently reset.
+</p>
+</dd>
+<dt><code>EPOCHSECONDS</code>
+<span id="index-EPOCHSECONDS"></span>
+</dt>
+<dd><p>Each time this parameter is referenced, it expands to the number of seconds
+since the Unix Epoch (see the documentation for the C library function
+<var>time</var> for the definition of Epoch).
+Assignments to <code>EPOCHSECONDS</code> are ignored.
+If <code>EPOCHSECONDS</code>
+is unset, it loses its special properties, even if
+it is subsequently reset.
+</p>
+</dd>
+<dt><code>EUID</code>
+<span id="index-EUID"></span>
+</dt>
+<dd><p>The numeric effective user id of the current user.  This variable
+is readonly.
+</p>
+</dd>
+<dt><code>EXECIGNORE</code>
+<span id="index-EXECIGNORE"></span>
+</dt>
+<dd><p>A colon-separated list of shell patterns (see <a href="#Pattern-Matching">Pattern Matching</a>)
+defining the list of filenames to be ignored by command search using
+<code>PATH</code>.
+Files whose full pathnames match one of these patterns are not considered
+executable files for the purposes of completion and command execution
+via <code>PATH</code> lookup.
+This does not affect the behavior of the <code>[</code>, <code>test</code>, and <code>[[</code>
+commands.
+Full pathnames in the command hash table are not subject to <code>EXECIGNORE</code>.
+Use this variable to ignore shared library files that have the executable
+bit set, but are not executable files.
+The pattern matching honors the setting of the <code>extglob</code> shell 
+option.
+</p>
+</dd>
+<dt><code>FCEDIT</code>
+<span id="index-FCEDIT"></span>
+</dt>
+<dd><p>The editor used as a default by the <samp>-e</samp> option to the <code>fc</code>
+builtin command.
+</p>
+</dd>
+<dt><code>FIGNORE</code>
+<span id="index-FIGNORE"></span>
+</dt>
+<dd><p>A colon-separated list of suffixes to ignore when performing
+filename completion.
+A filename whose suffix matches one of the entries in 
+<code>FIGNORE</code>
+is excluded from the list of matched filenames.  A sample
+value is &lsquo;<samp>.o:~</samp>&rsquo;
+</p>
+</dd>
+<dt><code>FUNCNAME</code>
+<span id="index-FUNCNAME"></span>
+</dt>
+<dd><p>An array variable containing the names of all shell functions
+currently in the execution call stack.
+The element with index 0 is the name of any currently-executing
+shell function.
+The bottom-most element (the one with the highest index)
+is <code>&quot;main&quot;</code>.
+This variable exists only when a shell function is executing.
+Assignments to <code>FUNCNAME</code> have no effect.
+If <code>FUNCNAME</code>
+is unset, it loses its special properties, even if
+it is subsequently reset.
+</p>
+<p>This variable can be used with <code>BASH_LINENO</code> and <code>BASH_SOURCE</code>.
+Each element of <code>FUNCNAME</code> has corresponding elements in
+<code>BASH_LINENO</code> and <code>BASH_SOURCE</code> to describe the call stack.
+For instance, <code>${FUNCNAME[$i]}</code> was called from the file
+<code>${BASH_SOURCE[$i+1]}</code> at line number <code>${BASH_LINENO[$i]}</code>.
+The <code>caller</code> builtin displays the current call stack using this
+information.
+</p>
+</dd>
+<dt><code>FUNCNEST</code>
+<span id="index-FUNCNEST"></span>
+</dt>
+<dd><p>If set to a numeric value greater than 0, defines a maximum function
+nesting level.  Function invocations that exceed this nesting level
+will cause the current command to abort.
+</p>
+</dd>
+<dt><code>GLOBIGNORE</code>
+<span id="index-GLOBIGNORE"></span>
+</dt>
+<dd><p>A colon-separated list of patterns defining the set of file names to
+be ignored by filename expansion.
+If a file name matched by a filename expansion pattern also matches one
+of the patterns in <code>GLOBIGNORE</code>, it is removed from the list
+of matches.
+The pattern matching honors the setting of the <code>extglob</code> shell
+option.
+</p>
+</dd>
+<dt><code>GROUPS</code>
+<span id="index-GROUPS"></span>
+</dt>
+<dd><p>An array variable containing the list of groups of which the current    
+user is a member.
+Assignments to <code>GROUPS</code> have no effect.
+If <code>GROUPS</code>
+is unset, it loses its special properties, even if it is
+subsequently reset.
+</p>
+</dd>
+<dt><code>histchars</code>
+<span id="index-histchars"></span>
+</dt>
+<dd><p>Up to three characters which control history expansion, quick
+substitution, and tokenization (see <a href="#History-Interaction">History Interaction</a>).
+The first character is the
+<var>history expansion</var> character, that is, the character which signifies the
+start of a history expansion, normally &lsquo;<samp>!</samp>&rsquo;.  The second character is the
+character which signifies &lsquo;quick substitution&rsquo; when seen as the first
+character on a line, normally &lsquo;<samp>^</samp>&rsquo;.  The optional third character is the
+character which indicates that the remainder of the line is a comment when
+found as the first character of a word, usually &lsquo;<samp>#</samp>&rsquo;.  The history
+comment character causes history substitution to be skipped for the
+remaining words on the line.  It does not necessarily cause the shell
+parser to treat the rest of the line as a comment.
+</p>
+</dd>
+<dt><code>HISTCMD</code>
+<span id="index-HISTCMD"></span>
+</dt>
+<dd><p>The history number, or index in the history list, of the current
+command.
+Assignments to <code>HISTCMD</code> are ignored.
+If <code>HISTCMD</code>
+is unset, it loses its special properties,
+even if it is subsequently reset.
+</p>
+</dd>
+<dt><code>HISTCONTROL</code>
+<span id="index-HISTCONTROL"></span>
+</dt>
+<dd><p>A colon-separated list of values controlling how commands are saved on
+the history list.
+If the list of values includes &lsquo;<samp>ignorespace</samp>&rsquo;, lines which begin
+with a space character are not saved in the history list.
+A value of &lsquo;<samp>ignoredups</samp>&rsquo; causes lines which match the previous
+history entry to not be saved.
+A value of &lsquo;<samp>ignoreboth</samp>&rsquo; is shorthand for
+&lsquo;<samp>ignorespace</samp>&rsquo; and &lsquo;<samp>ignoredups</samp>&rsquo;.
+A value of &lsquo;<samp>erasedups</samp>&rsquo; causes all previous lines matching the
+current line to be removed from the history list before that line
+is saved.
+Any value not in the above list is ignored.
+If <code>HISTCONTROL</code> is unset, or does not include a valid value, 
+all lines read by the shell parser are saved on the history list, 
+subject to the value of <code>HISTIGNORE</code>.
+The second and subsequent lines of a multi-line compound command are
+not tested, and are added to the history regardless of the value of
+<code>HISTCONTROL</code>.
+</p>
+</dd>
+<dt><code>HISTFILE</code>
+<span id="index-HISTFILE"></span>
+</dt>
+<dd><p>The name of the file to which the command history is saved.  The
+default value is <samp>~/.bash_history</samp>.
+</p>
+</dd>
+<dt><code>HISTFILESIZE</code>
+<span id="index-HISTFILESIZE"></span>
+</dt>
+<dd><p>The maximum number of lines contained in the history file.
+When this variable is assigned a value, the history file is truncated,
+if necessary, to contain no more than that number of lines
+by removing the oldest entries.
+The history file is also truncated to this size after
+writing it when a shell exits.
+If the value is 0, the history file is truncated to zero size.
+Non-numeric values and numeric values less than zero inhibit truncation.
+The shell sets the default value to the value of <code>HISTSIZE</code>
+after reading any startup files.
+</p>
+</dd>
+<dt><code>HISTIGNORE</code>
+<span id="index-HISTIGNORE"></span>
+</dt>
+<dd><p>A colon-separated list of patterns used to decide which command
+lines should be saved on the history list.  Each pattern is
+anchored at the beginning of the line and must match the complete
+line (no implicit &lsquo;<samp>*</samp>&rsquo; is appended).  Each pattern is tested
+against the line after the checks specified by <code>HISTCONTROL</code>
+are applied.  In addition to the normal shell pattern matching
+characters, &lsquo;<samp>&amp;</samp>&rsquo; matches the previous history line.  &lsquo;<samp>&amp;</samp>&rsquo;
+may be escaped using a backslash; the backslash is removed
+before attempting a match. 
+The second and subsequent lines of a multi-line compound command are
+not tested, and are added to the history regardless of the value of
+<code>HISTIGNORE</code>.
+The pattern matching honors the setting of the <code>extglob</code> shell
+option.
+</p>
+<p><code>HISTIGNORE</code> subsumes the function of <code>HISTCONTROL</code>.  A
+pattern of &lsquo;<samp>&amp;</samp>&rsquo; is identical to <code>ignoredups</code>, and a
+pattern of &lsquo;<samp>[ ]*</samp>&rsquo; is identical to <code>ignorespace</code>. 
+Combining these two patterns, separating them with a colon,
+provides the functionality of <code>ignoreboth</code>. 
+</p>
+</dd>
+<dt><code>HISTSIZE</code>
+<span id="index-HISTSIZE"></span>
+</dt>
+<dd><p>The maximum number of commands to remember on the history list.
+If the value is 0, commands are not saved in the history list.
+Numeric values less than zero result in every command being saved
+on the history list (there is no limit).
+The shell sets the default value to 500 after reading any startup files.
+</p>
+</dd>
+<dt><code>HISTTIMEFORMAT</code>
+<span id="index-HISTTIMEFORMAT"></span>
+</dt>
+<dd><p>If this variable is set and not null, its value is used as a format string
+for <var>strftime</var> to print the time stamp associated with each history
+entry displayed by the <code>history</code> builtin.
+If this variable is set, time stamps are written to the history file so
+they may be preserved across shell sessions.
+This uses the history comment character to distinguish timestamps from
+other history lines.
+</p>
+</dd>
+<dt><code>HOSTFILE</code>
+<span id="index-HOSTFILE"></span>
+</dt>
+<dd><p>Contains the name of a file in the same format as <samp>/etc/hosts</samp> that
+should be read when the shell needs to complete a hostname.
+The list of possible hostname completions may be changed while the shell
+is running;
+the next time hostname completion is attempted after the
+value is changed, Bash adds the contents of the new file to the
+existing list.
+If <code>HOSTFILE</code> is set, but has no value, or does not name a readable file,
+Bash attempts to read 
+<samp>/etc/hosts</samp> to obtain the list of possible hostname completions.
+When <code>HOSTFILE</code> is unset, the hostname list is cleared.
+</p>
+</dd>
+<dt><code>HOSTNAME</code>
+<span id="index-HOSTNAME"></span>
+</dt>
+<dd><p>The name of the current host.
+</p>
+</dd>
+<dt><code>HOSTTYPE</code>
+<span id="index-HOSTTYPE"></span>
+</dt>
+<dd><p>A string describing the machine Bash is running on.
+</p>
+</dd>
+<dt><code>IGNOREEOF</code>
+<span id="index-IGNOREEOF"></span>
+</dt>
+<dd><p>Controls the action of the shell on receipt of an <code>EOF</code> character
+as the sole input.  If set, the value denotes the number
+of consecutive <code>EOF</code> characters that can be read as the
+first character on an input line
+before the shell will exit.  If the variable exists but does not
+have a numeric value, or has no value, then the default is 10.
+If the variable does not exist, then <code>EOF</code> signifies the end of 
+input to the shell.  This is only in effect for interactive shells.
+</p>
+</dd>
+<dt><code>INPUTRC</code>
+<span id="index-INPUTRC"></span>
+</dt>
+<dd><p>The name of the Readline initialization file, overriding the default
+of <samp>~/.inputrc</samp>.
+</p>
+</dd>
+<dt><code>INSIDE_EMACS</code>
+<span id="index-INSIDE_005fEMACS"></span>
+</dt>
+<dd><p>If Bash finds this variable in the environment when the shell
+starts, it assumes that the shell is running in an Emacs shell buffer
+and may disable line editing depending on the value of <code>TERM</code>.
+</p>
+</dd>
+<dt><code>LANG</code>
+<span id="index-LANG"></span>
+</dt>
+<dd><p>Used to determine the locale category for any category not specifically
+selected with a variable starting with <code>LC_</code>.
+</p>
+</dd>
+<dt><code>LC_ALL</code>
+<span id="index-LC_005fALL"></span>
+</dt>
+<dd><p>This variable overrides the value of <code>LANG</code> and any other
+<code>LC_</code> variable specifying a locale category.
+</p>
+</dd>
+<dt><code>LC_COLLATE</code>
+<span id="index-LC_005fCOLLATE"></span>
+</dt>
+<dd><p>This variable determines the collation order used when sorting the
+results of filename expansion, and
+determines the behavior of range expressions, equivalence classes,
+and collating sequences within filename expansion and pattern matching
+(see <a href="#Filename-Expansion">Filename Expansion</a>).
+</p>
+</dd>
+<dt><code>LC_CTYPE</code>
+<span id="index-LC_005fCTYPE"></span>
+</dt>
+<dd><p>This variable determines the interpretation of characters and the
+behavior of character classes within filename expansion and pattern
+matching (see <a href="#Filename-Expansion">Filename Expansion</a>).
+</p>
+</dd>
+<dt><code>LC_MESSAGES</code>
+<span id="index-LC_005fMESSAGES-1"></span>
+</dt>
+<dd><p>This variable determines the locale used to translate double-quoted
+strings preceded by a &lsquo;<samp>$</samp>&rsquo; (see <a href="#Locale-Translation">Locale Translation</a>).
+</p>
+</dd>
+<dt><code>LC_NUMERIC</code>
+<span id="index-LC_005fNUMERIC"></span>
+</dt>
+<dd><p>This variable determines the locale category used for number formatting.
+</p>
+</dd>
+<dt><code>LC_TIME</code>
+<span id="index-LC_005fTIME"></span>
+</dt>
+<dd><p>This variable determines the locale category used for data and time
+formatting.
+</p>
+</dd>
+<dt><code>LINENO</code>
+<span id="index-LINENO"></span>
+</dt>
+<dd><p>The line number in the script or shell function currently executing.
+If <code>LINENO</code>
+is unset, it loses its special properties, even if it is
+subsequently reset.
+</p>
+</dd>
+<dt><code>LINES</code>
+<span id="index-LINES"></span>
+</dt>
+<dd><p>Used by the <code>select</code> command to determine the column length
+for printing selection lists.
+Automatically set if the <code>checkwinsize</code> option is enabled
+(see <a href="#The-Shopt-Builtin">The Shopt Builtin</a>), or in an interactive shell upon receipt of a
+<code>SIGWINCH</code>.
+</p>
+</dd>
+<dt><code>MACHTYPE</code>
+<span id="index-MACHTYPE"></span>
+</dt>
+<dd><p>A string that fully describes the system type on which Bash
+is executing, in the standard <small>GNU</small> <var>cpu-company-system</var> format.
+</p>
+</dd>
+<dt><code>MAILCHECK</code>
+<span id="index-MAILCHECK"></span>
+</dt>
+<dd><p>How often (in seconds) that the shell should check for mail in the
+files specified in the <code>MAILPATH</code> or <code>MAIL</code> variables.
+The default is 60 seconds.  When it is time to check
+for mail, the shell does so before displaying the primary prompt.
+If this variable is unset, or set to a value that is not a number
+greater than or equal to zero, the shell disables mail checking.
+</p>
+</dd>
+<dt><code>MAPFILE</code>
+<span id="index-MAPFILE"></span>
+</dt>
+<dd><p>An array variable created to hold the text read by the
+<code>mapfile</code> builtin when no variable name is supplied.
+</p>
+</dd>
+<dt><code>OLDPWD</code>
+<span id="index-OLDPWD"></span>
+</dt>
+<dd><p>The previous working directory as set by the <code>cd</code> builtin.
+</p>
+</dd>
+<dt><code>OPTERR</code>
+<span id="index-OPTERR"></span>
+</dt>
+<dd><p>If set to the value 1, Bash displays error messages
+generated by the <code>getopts</code> builtin command.
+</p>
+</dd>
+<dt><code>OSTYPE</code>
+<span id="index-OSTYPE"></span>
+</dt>
+<dd><p>A string describing the operating system Bash is running on.
+</p>
+</dd>
+<dt><code>PIPESTATUS</code>
+<span id="index-PIPESTATUS"></span>
+</dt>
+<dd><p>An array variable (see <a href="#Arrays">Arrays</a>)
+containing a list of exit status values from the processes
+in the most-recently-executed foreground pipeline (which may
+contain only a single command).
+</p>
+</dd>
+<dt><code>POSIXLY_CORRECT</code>
+<span id="index-POSIXLY_005fCORRECT"></span>
+</dt>
+<dd><p>If this variable is in the environment when Bash starts, the shell
+enters <small>POSIX</small> mode (see <a href="#Bash-POSIX-Mode">Bash POSIX Mode</a>) before reading the
+startup files, as if the <samp>--posix</samp> invocation option had been supplied.
+If it is set while the shell is running, Bash enables <small>POSIX</small> mode,
+as if the command
+</p><div class="example">
+<pre class="example"><code>set -o posix</code>
+</pre></div>
+<p>had been executed.
+When the shell enters <small>POSIX</small> mode, it sets this variable if it was
+not already set.
+</p>
+</dd>
+<dt><code>PPID</code>
+<span id="index-PPID"></span>
+</dt>
+<dd><p>The process <small>ID</small> of the shell&rsquo;s parent process.  This variable
+is readonly.
+</p>
+</dd>
+<dt><code>PROMPT_COMMAND</code>
+<span id="index-PROMPT_005fCOMMAND"></span>
+</dt>
+<dd><p>If this variable is set, and is an array,
+the value of each set element is interpreted as a command to execute
+before printing the primary prompt (<code>$PS1</code>).
+If this is set but not an array variable,
+its value is used as a command to execute instead.
+</p>
+</dd>
+<dt><code>PROMPT_DIRTRIM</code>
+<span id="index-PROMPT_005fDIRTRIM"></span>
+</dt>
+<dd><p>If set to a number greater than zero, the value is used as the number of
+trailing directory components to retain when expanding the <code>\w</code> and
+<code>\W</code> prompt string escapes (see <a href="#Controlling-the-Prompt">Controlling the Prompt</a>).
+Characters removed are replaced with an ellipsis.
+</p>
+</dd>
+<dt><code>PS0</code>
+<span id="index-PS0"></span>
+</dt>
+<dd><p>The value of this parameter is expanded like <code>PS1</code>
+and displayed by interactive shells after reading a command
+and before the command is executed.
+</p>
+</dd>
+<dt><code>PS3</code>
+<span id="index-PS3"></span>
+</dt>
+<dd><p>The value of this variable is used as the prompt for the
+<code>select</code> command.  If this variable is not set, the
+<code>select</code> command prompts with &lsquo;<samp>#? </samp>&rsquo;
+</p>
+</dd>
+<dt><code>PS4</code>
+<span id="index-PS4"></span>
+</dt>
+<dd><p>The value of this parameter is expanded like <var>PS1</var>
+and the expanded value is the prompt printed before the command line
+is echoed when the <samp>-x</samp> option is set (see <a href="#The-Set-Builtin">The Set Builtin</a>).
+The first character of the expanded value is replicated multiple times,
+as necessary, to indicate multiple levels of indirection.
+The default is &lsquo;<samp>+ </samp>&rsquo;.
+</p>
+</dd>
+<dt><code>PWD</code>
+<span id="index-PWD"></span>
+</dt>
+<dd><p>The current working directory as set by the <code>cd</code> builtin.
+</p>
+</dd>
+<dt><code>RANDOM</code>
+<span id="index-RANDOM"></span>
+</dt>
+<dd><p>Each time this parameter is referenced, it expands to a random integer
+between 0 and 32767. Assigning a value to this
+variable seeds the random number generator.
+If <code>RANDOM</code>
+is unset, it loses its special properties, even if it is
+subsequently reset.
+</p>
+</dd>
+<dt><code>READLINE_LINE</code>
+<span id="index-READLINE_005fLINE"></span>
+</dt>
+<dd><p>The contents of the Readline line buffer, for use
+with &lsquo;<samp>bind -x</samp>&rsquo; (see <a href="#Bash-Builtins">Bash Builtins</a>).
+</p>
+</dd>
+<dt><code>READLINE_MARK</code>
+<span id="index-READLINE_005fMARK"></span>
+</dt>
+<dd><p>The position of the <var>mark</var> (saved insertion point) in the
+Readline line buffer, for use
+with &lsquo;<samp>bind -x</samp>&rsquo; (see <a href="#Bash-Builtins">Bash Builtins</a>).
+The characters between the insertion point and the mark are often
+called the <var>region</var>.
+</p>
+</dd>
+<dt><code>READLINE_POINT</code>
+<span id="index-READLINE_005fPOINT"></span>
+</dt>
+<dd><p>The position of the insertion point in the Readline line buffer, for use
+with &lsquo;<samp>bind -x</samp>&rsquo; (see <a href="#Bash-Builtins">Bash Builtins</a>).
+</p>
+</dd>
+<dt><code>REPLY</code>
+<span id="index-REPLY"></span>
+</dt>
+<dd><p>The default variable for the <code>read</code> builtin.
+</p>
+</dd>
+<dt><code>SECONDS</code>
+<span id="index-SECONDS"></span>
+</dt>
+<dd><p>This variable expands to the number of seconds since the
+shell was started.  Assignment to this variable resets
+the count to the value assigned, and the expanded value
+becomes the value assigned plus the number of seconds
+since the assignment.
+The number of seconds at shell invocation and the current time is always
+determined by querying the system clock.
+If <code>SECONDS</code>
+is unset, it loses its special properties,
+even if it is subsequently reset.
+</p>
+</dd>
+<dt><code>SHELL</code>
+<span id="index-SHELL"></span>
+</dt>
+<dd><p>This environment variable expands to the full pathname to the shell.
+If it is not set when the shell starts,
+Bash assigns to it the full pathname of the current user&rsquo;s login shell.
+</p>
+</dd>
+<dt><code>SHELLOPTS</code>
+<span id="index-SHELLOPTS"></span>
+</dt>
+<dd><p>A colon-separated list of enabled shell options.  Each word in
+the list is a valid argument for the <samp>-o</samp> option to the
+<code>set</code> builtin command (see <a href="#The-Set-Builtin">The Set Builtin</a>).
+The options appearing in <code>SHELLOPTS</code> are those reported
+as &lsquo;<samp>on</samp>&rsquo; by &lsquo;<samp>set -o</samp>&rsquo;.
+If this variable is in the environment when Bash
+starts up, each shell option in the list will be enabled before
+reading any startup files.  This variable is readonly.
+</p>
+</dd>
+<dt><code>SHLVL</code>
+<span id="index-SHLVL"></span>
+</dt>
+<dd><p>Incremented by one each time a new instance of Bash is started.  This is
+intended to be a count of how deeply your Bash shells are nested.
+</p>
+</dd>
+<dt><code>SRANDOM</code>
+<span id="index-SRANDOM"></span>
+</dt>
+<dd><p>This variable expands to a 32-bit pseudo-random number each time it is
+referenced. The random number generator is not linear on systems that
+support <samp>/dev/urandom</samp> or <code>arc4random</code>, so each returned number
+has no relationship to the numbers preceding it.
+The random number generator cannot be seeded, so assignments to this
+variable have no effect.
+If <code>SRANDOM</code>
+is unset, it loses its special properties,
+even if it is subsequently reset.
+</p>
+</dd>
+<dt><code>TIMEFORMAT</code>
+<span id="index-TIMEFORMAT"></span>
+</dt>
+<dd><p>The value of this parameter is used as a format string specifying
+how the timing information for pipelines prefixed with the <code>time</code>
+reserved word should be displayed.
+The &lsquo;<samp>%</samp>&rsquo; character introduces an
+escape sequence that is expanded to a time value or other
+information.
+The escape sequences and their meanings are as
+follows; the braces denote optional portions. 
+</p>
+<dl compact="compact">
+<dt><code>%%</code></dt>
+<dd><p>A literal &lsquo;<samp>%</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>%[<var>p</var>][l]R</code></dt>
+<dd><p>The elapsed time in seconds. 
+</p>
+</dd>
+<dt><code>%[<var>p</var>][l]U</code></dt>
+<dd><p>The number of CPU seconds spent in user mode. 
+</p>
+</dd>
+<dt><code>%[<var>p</var>][l]S</code></dt>
+<dd><p>The number of CPU seconds spent in system mode. 
+</p>
+</dd>
+<dt><code>%P</code></dt>
+<dd><p>The CPU percentage, computed as (%U + %S) / %R. 
+</p></dd>
+</dl>
+
+<p>The optional <var>p</var> is a digit specifying the precision, the number of
+fractional digits after a decimal point.
+A value of 0 causes no decimal point or fraction to be output.
+At most three places after the decimal point may be specified; values
+of <var>p</var> greater than 3 are changed to 3.
+If <var>p</var> is not specified, the value 3 is used. 
+</p>
+<p>The optional <code>l</code> specifies a longer format, including minutes, of
+the form <var>MM</var>m<var>SS</var>.<var>FF</var>s.
+The value of <var>p</var> determines whether or not the fraction is included. 
+</p>
+<p>If this variable is not set, Bash acts as if it had the value
+</p><div class="example">
+<pre class="example"><code>$'\nreal\t%3lR\nuser\t%3lU\nsys\t%3lS'</code>
+</pre></div>
+<p>If the value is null, no timing information is displayed.
+A trailing newline is added when the format string is displayed.
+</p>
+</dd>
+<dt><code>TMOUT</code>
+<span id="index-TMOUT"></span>
+</dt>
+<dd><p>If set to a value greater than zero, <code>TMOUT</code> is treated as the
+default timeout for the <code>read</code> builtin (see <a href="#Bash-Builtins">Bash Builtins</a>).
+The <code>select</code> command (see <a href="#Conditional-Constructs">Conditional Constructs</a>) terminates
+if input does not arrive after <code>TMOUT</code> seconds when input is coming
+from a terminal.
+</p>
+<p>In an interactive shell, the value is interpreted as
+the number of seconds to wait for a line of input after issuing
+the primary prompt.
+Bash
+terminates after waiting for that number of seconds if a complete
+line of input does not arrive.
+</p>
+</dd>
+<dt><code>TMPDIR</code>
+<span id="index-TMPDIR"></span>
+</dt>
+<dd><p>If set, Bash uses its value as the name of a directory in which
+Bash creates temporary files for the shell&rsquo;s use.
+</p>
+</dd>
+<dt><code>UID</code>
+<span id="index-UID"></span>
+</dt>
+<dd><p>The numeric real user id of the current user.  This variable is readonly.
+</p>
+</dd>
+</dl>
+
+<hr>
+<span id="Bash-Features"></span><div class="header">
+<p>
+Next: <a href="#Job-Control" accesskey="n" rel="next">Job Control</a>, Previous: <a href="#Shell-Variables" accesskey="p" rel="prev">Shell Variables</a>, Up: <a href="#Top" accesskey="u" rel="up">Top</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Bash-Features-2"></span><h2 class="chapter">6 Bash Features</h2>
+
+<p>This chapter describes features unique to Bash.
+</p>
+<table class="menu" border="0" cellspacing="0">
+<tr><td align="left" valign="top">&bull; <a href="#Invoking-Bash" accesskey="1">Invoking Bash</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Command line options that you can give
+				to Bash.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Bash-Startup-Files" accesskey="2">Bash Startup Files</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">When and how Bash executes scripts.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Interactive-Shells" accesskey="3">Interactive Shells</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">What an interactive shell is.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Bash-Conditional-Expressions" accesskey="4">Bash Conditional Expressions</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Primitives used in composing expressions for
+				the <code>test</code> builtin.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Shell-Arithmetic" accesskey="5">Shell Arithmetic</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Arithmetic on shell variables.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Aliases" accesskey="6">Aliases</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Substituting one command for another.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Arrays" accesskey="7">Arrays</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Array Variables.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#The-Directory-Stack" accesskey="8">The Directory Stack</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">History of visited directories.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Controlling-the-Prompt" accesskey="9">Controlling the Prompt</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Customizing the various prompt strings.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#The-Restricted-Shell">The Restricted Shell</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">A more controlled mode of shell execution.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Bash-POSIX-Mode">Bash POSIX Mode</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Making Bash behave more closely to what
+				the POSIX standard specifies.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Shell-Compatibility-Mode">Shell Compatibility Mode</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How Bash supports behavior that was present
+				in earlier versions and has changed.
+</td></tr>
+</table>
+
+<hr>
+<span id="Invoking-Bash"></span><div class="header">
+<p>
+Next: <a href="#Bash-Startup-Files" accesskey="n" rel="next">Bash Startup Files</a>, Up: <a href="#Bash-Features" accesskey="u" rel="up">Bash Features</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Invoking-Bash-1"></span><h3 class="section">6.1 Invoking Bash</h3>
+
+<div class="example">
+<pre class="example">bash [long-opt] [-ir] [-abefhkmnptuvxdBCDHP] [-o <var>option</var>]
+    [-O <var>shopt_option</var>] [<var>argument</var> &hellip;]
+bash [long-opt] [-abefhkmnptuvxdBCDHP] [-o <var>option</var>]
+    [-O <var>shopt_option</var>] -c <var>string</var> [<var>argument</var> &hellip;]
+bash [long-opt] -s [-abefhkmnptuvxdBCDHP] [-o <var>option</var>]
+    [-O <var>shopt_option</var>] [<var>argument</var> &hellip;]
+</pre></div>
+
+<p>All of the single-character options used with the <code>set</code> builtin
+(see <a href="#The-Set-Builtin">The Set Builtin</a>) can be used as options when the shell is invoked.
+In addition, there are several multi-character
+options that you can use.  These options must appear on the command
+line before the single-character options to be recognized. 
+</p>
+<dl compact="compact">
+<dt><code>--debugger</code></dt>
+<dd><p>Arrange for the debugger profile to be executed before the shell
+starts.  Turns on extended debugging mode (see <a href="#The-Shopt-Builtin">The Shopt Builtin</a>
+for a description of the <code>extdebug</code> option to the <code>shopt</code>
+builtin).
+</p>
+</dd>
+<dt><code>--dump-po-strings</code></dt>
+<dd><p>A list of all double-quoted strings preceded by &lsquo;<samp>$</samp>&rsquo;
+is printed on the standard output
+in the <small>GNU</small> <code>gettext</code> PO (portable object) file format.
+Equivalent to <samp>-D</samp> except for the output format.
+</p>
+</dd>
+<dt><code>--dump-strings</code></dt>
+<dd><p>Equivalent to <samp>-D</samp>.
+</p>
+</dd>
+<dt><code>--help</code></dt>
+<dd><p>Display a usage message on standard output and exit successfully.
+</p>
+</dd>
+<dt><code>--init-file <var>filename</var></code></dt>
+<dt><code>--rcfile <var>filename</var></code></dt>
+<dd><p>Execute commands from <var>filename</var> (instead of <samp>~/.bashrc</samp>)
+in an interactive shell.
+</p>
+</dd>
+<dt><code>--login</code></dt>
+<dd><p>Equivalent to <samp>-l</samp>.
+</p>
+</dd>
+<dt><code>--noediting</code></dt>
+<dd><p>Do not use the <small>GNU</small> Readline library (see <a href="#Command-Line-Editing">Command Line Editing</a>)
+to read  command lines when the shell is interactive.
+</p>
+</dd>
+<dt><code>--noprofile</code></dt>
+<dd><p>Don&rsquo;t load the system-wide startup file <samp>/etc/profile</samp>
+or any of the personal initialization files
+<samp>~/.bash_profile</samp>, <samp>~/.bash_login</samp>, or <samp>~/.profile</samp>
+when Bash is invoked as a login shell.
+</p>
+</dd>
+<dt><code>--norc</code></dt>
+<dd><p>Don&rsquo;t read the <samp>~/.bashrc</samp> initialization file in an
+interactive shell.  This is on by default if the shell is
+invoked as <code>sh</code>.
+</p>
+</dd>
+<dt><code>--posix</code></dt>
+<dd><p>Change the behavior of Bash where the default operation differs
+from the <small>POSIX</small> standard to match the standard.  This
+is intended to make Bash behave as a strict superset of that
+standard.  See <a href="#Bash-POSIX-Mode">Bash POSIX Mode</a>, for a description of the Bash
+<small>POSIX</small> mode.
+</p>
+</dd>
+<dt><code>--restricted</code></dt>
+<dd><p>Make the shell a restricted shell (see <a href="#The-Restricted-Shell">The Restricted Shell</a>).
+</p>
+</dd>
+<dt><code>--verbose</code></dt>
+<dd><p>Equivalent to <samp>-v</samp>.  Print shell input lines as they&rsquo;re read.
+</p>
+</dd>
+<dt><code>--version</code></dt>
+<dd><p>Show version information for this instance of
+Bash on the standard output and exit successfully.
+</p></dd>
+</dl>
+
+<p>There are several single-character options that may be supplied at
+invocation which are not available with the <code>set</code> builtin.
+</p>
+<dl compact="compact">
+<dt><code>-c</code></dt>
+<dd><p>Read and execute commands from the first non-option argument
+<var>command_string</var>, then exit. 
+If there are arguments after the <var>command_string</var>,
+the first argument is assigned to <code>$0</code>
+and any remaining arguments are assigned to the positional parameters.
+The assignment to <code>$0</code> sets the name of the shell, which is used
+in warning and error messages.
+</p>
+</dd>
+<dt><code>-i</code></dt>
+<dd><p>Force the shell to run interactively.  Interactive shells are
+described in <a href="#Interactive-Shells">Interactive Shells</a>.
+</p>
+</dd>
+<dt><code>-l</code></dt>
+<dd><p>Make this shell act as if it had been directly invoked by login.
+When the shell is interactive, this is equivalent to starting a
+login shell with &lsquo;<samp>exec -l bash</samp>&rsquo;.
+When the shell is not interactive, the login shell startup files will
+be executed.
+&lsquo;<samp>exec bash -l</samp>&rsquo; or &lsquo;<samp>exec bash --login</samp>&rsquo;
+will replace the current shell with a Bash login shell.
+See <a href="#Bash-Startup-Files">Bash Startup Files</a>, for a description of the special behavior
+of a login shell.
+</p>
+</dd>
+<dt><code>-r</code></dt>
+<dd><p>Make the shell a restricted shell (see <a href="#The-Restricted-Shell">The Restricted Shell</a>).
+</p>
+</dd>
+<dt><code>-s</code></dt>
+<dd><p>If this option is present, or if no arguments remain after option
+processing, then commands are read from the standard input.
+This option allows the positional parameters to be set
+when invoking an interactive shell or when reading input
+through a pipe.
+</p>
+</dd>
+<dt><code>-D</code></dt>
+<dd><p>A list of all double-quoted strings preceded by &lsquo;<samp>$</samp>&rsquo;
+is printed on the standard output.
+These are the strings that
+are subject to language translation when the current locale
+is not <code>C</code> or <code>POSIX</code> (see <a href="#Locale-Translation">Locale Translation</a>).
+This implies the <samp>-n</samp> option; no commands will be executed.
+</p>
+</dd>
+<dt><code>[-+]O [<var>shopt_option</var>]</code></dt>
+<dd><p><var>shopt_option</var> is one of the shell options accepted by the
+<code>shopt</code> builtin (see <a href="#The-Shopt-Builtin">The Shopt Builtin</a>).
+If <var>shopt_option</var> is present, <samp>-O</samp> sets the value of that option;
+<samp>+O</samp> unsets it.  
+If <var>shopt_option</var> is not supplied, the names and values of the shell
+options accepted by <code>shopt</code> are printed on the standard output.
+If the invocation option is <samp>+O</samp>, the output is displayed in a format
+that may be reused as input.
+</p>
+</dd>
+<dt><code>--</code></dt>
+<dd><p>A <code>--</code> signals the end of options and disables further option
+processing.
+Any arguments after the <code>--</code> are treated as filenames and arguments.
+</p></dd>
+</dl>
+
+<span id="index-login-shell"></span>
+<p>A <em>login</em> shell is one whose first character of argument zero is
+&lsquo;<samp>-</samp>&rsquo;, or one invoked with the <samp>--login</samp> option.
+</p>
+<span id="index-interactive-shell"></span>
+<p>An <em>interactive</em> shell is one started without non-option arguments,
+unless <samp>-s</samp> is specified,
+without specifying the <samp>-c</samp> option, and whose input and output are both
+connected to terminals (as determined by <code>isatty(3)</code>), or one
+started with the <samp>-i</samp> option.  See <a href="#Interactive-Shells">Interactive Shells</a>, for more
+information.
+</p>
+<p>If arguments remain after option processing, and neither the
+<samp>-c</samp> nor the <samp>-s</samp>
+option has been supplied, the first argument is assumed to
+be the name of a file containing shell commands (see <a href="#Shell-Scripts">Shell Scripts</a>).
+When Bash is invoked in this fashion, <code>$0</code>
+is set to the name of the file, and the positional parameters
+are set to the remaining arguments.
+Bash reads and executes commands from this file, then exits.   
+Bash&rsquo;s exit status is the exit status of the last command executed
+in the script.  If no commands are executed, the exit status is 0.
+</p>
+<hr>
+<span id="Bash-Startup-Files"></span><div class="header">
+<p>
+Next: <a href="#Interactive-Shells" accesskey="n" rel="next">Interactive Shells</a>, Previous: <a href="#Invoking-Bash" accesskey="p" rel="prev">Invoking Bash</a>, Up: <a href="#Bash-Features" accesskey="u" rel="up">Bash Features</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Bash-Startup-Files-1"></span><h3 class="section">6.2 Bash Startup Files</h3>
+<span id="index-startup-files"></span>
+
+<p>This section describes how Bash executes its startup files.
+If any of the files exist but cannot be read, Bash reports an error.
+Tildes are expanded in filenames as described above under
+Tilde Expansion (see <a href="#Tilde-Expansion">Tilde Expansion</a>).
+</p>
+<p>Interactive shells are described in <a href="#Interactive-Shells">Interactive Shells</a>.
+</p>
+<span id="Invoked-as-an-interactive-login-shell_002c-or-with-_002d_002dlogin"></span><h4 class="subsubheading">Invoked as an interactive login shell, or with <samp>--login</samp></h4>
+
+<p>When Bash is invoked as an interactive login shell, or as a
+non-interactive shell with the <samp>--login</samp> option, it first reads and
+executes commands from the file <samp>/etc/profile</samp>, if that file exists.
+After reading that file, it looks for <samp>~/.bash_profile</samp>,
+<samp>~/.bash_login</samp>, and <samp>~/.profile</samp>, in that order, and reads
+and executes commands from the first one that exists and is readable.
+The <samp>--noprofile</samp> option may be used when the shell is started to
+inhibit this behavior.
+</p>
+<p>When an interactive login shell exits,
+or a non-interactive login shell executes the <code>exit</code> builtin command,
+Bash reads and executes commands from
+the file <samp>~/.bash_logout</samp>, if it exists.
+</p>
+<span id="Invoked-as-an-interactive-non_002dlogin-shell"></span><h4 class="subsubheading">Invoked as an interactive non-login shell</h4>
+
+<p>When an interactive shell that is not a login shell is started, Bash
+reads and executes commands from <samp>~/.bashrc</samp>, if that file exists.
+This may be inhibited by using the <samp>--norc</samp> option.
+The <samp>--rcfile <var>file</var></samp> option will force Bash to read and
+execute commands from <var>file</var> instead of <samp>~/.bashrc</samp>.
+</p>
+<p>So, typically, your <samp>~/.bash_profile</samp> contains the line
+</p><div class="example">
+<pre class="example"><code>if [ -f ~/.bashrc ]; then . ~/.bashrc; fi</code>
+</pre></div>
+<p>after (or before) any login-specific initializations.
+</p>
+<span id="Invoked-non_002dinteractively"></span><h4 class="subsubheading">Invoked non-interactively</h4>
+
+<p>When Bash is started non-interactively, to run a shell script,
+for example, it looks for the variable <code>BASH_ENV</code> in the environment,
+expands its value if it appears there, and uses the expanded value as
+the name of a file to read and execute.  Bash behaves as if the
+following command were executed:
+</p><div class="example">
+<pre class="example"><code>if [ -n &quot;$BASH_ENV&quot; ]; then . &quot;$BASH_ENV&quot;; fi</code>
+</pre></div>
+<p>but the value of the <code>PATH</code> variable is not used to search for the
+filename.
+</p>
+<p>As noted above, if a non-interactive shell is invoked with the
+<samp>--login</samp> option, Bash attempts to read and execute commands from the
+login shell startup files. 
+</p>
+<span id="Invoked-with-name-sh"></span><h4 class="subsubheading">Invoked with name <code>sh</code></h4>
+
+<p>If Bash is invoked with the name <code>sh</code>, it tries to mimic the
+startup behavior of historical versions of <code>sh</code> as closely as
+possible, while conforming to the <small>POSIX</small> standard as well.
+</p>
+<p>When invoked as an interactive login shell, or as a non-interactive
+shell with the <samp>--login</samp> option, it first attempts to read
+and execute commands from <samp>/etc/profile</samp> and <samp>~/.profile</samp>, in
+that order.
+The <samp>--noprofile</samp> option may be used to inhibit this behavior.
+When invoked as an interactive shell with the name <code>sh</code>, Bash
+looks for the variable <code>ENV</code>, expands its value if it is defined,
+and uses the expanded value as the name of a file to read and execute.
+Since a shell invoked as <code>sh</code> does not attempt to read and execute
+commands from any other startup files, the <samp>--rcfile</samp> option has
+no effect.
+A non-interactive shell invoked with the name <code>sh</code> does not attempt
+to read any other startup files.
+</p>
+<p>When invoked as <code>sh</code>, Bash enters <small>POSIX</small> mode after
+the startup files are read.
+</p>
+<span id="Invoked-in-POSIX-mode"></span><h4 class="subsubheading">Invoked in <small>POSIX</small> mode</h4>
+
+<p>When Bash is started in <small>POSIX</small> mode, as with the
+<samp>--posix</samp> command line option, it follows the <small>POSIX</small> standard
+for startup files.
+In this mode, interactive shells expand the <code>ENV</code> variable
+and commands are read and executed from the file whose name is the
+expanded value.
+No other startup files are read.
+</p>
+<span id="Invoked-by-remote-shell-daemon"></span><h4 class="subsubheading">Invoked by remote shell daemon</h4>
+
+<p>Bash attempts to determine when it is being run with its standard input
+connected to a network connection, as when executed by the remote shell
+daemon, usually <code>rshd</code>, or the secure shell daemon <code>sshd</code>.
+If Bash determines it is being run in
+this fashion, it reads and executes commands from <samp>~/.bashrc</samp>, if that
+file exists and is readable.
+It will not do this if invoked as <code>sh</code>.
+The <samp>--norc</samp> option may be used to inhibit this behavior, and the
+<samp>--rcfile</samp> option may be used to force another file to be read, but
+neither <code>rshd</code> nor <code>sshd</code> generally invoke the shell with those
+options or allow them to be specified.
+</p>
+<span id="Invoked-with-unequal-effective-and-real-UID_002fGIDs"></span><h4 class="subsubheading">Invoked with unequal effective and real <small>UID/GID</small>s</h4>
+
+<p>If Bash is started with the effective user (group) id not equal to the
+real user (group) id, and the <samp>-p</samp> option is not supplied, no startup
+files are read, shell functions are not inherited from the environment,
+the <code>SHELLOPTS</code>, <code>BASHOPTS</code>, <code>CDPATH</code>, and <code>GLOBIGNORE</code>
+variables, if they appear in the environment, are ignored, and the effective
+user id is set to the real user id.
+If the <samp>-p</samp> option is supplied at invocation, the startup behavior is
+the same, but the effective user id is not reset.
+</p>
+<hr>
+<span id="Interactive-Shells"></span><div class="header">
+<p>
+Next: <a href="#Bash-Conditional-Expressions" accesskey="n" rel="next">Bash Conditional Expressions</a>, Previous: <a href="#Bash-Startup-Files" accesskey="p" rel="prev">Bash Startup Files</a>, Up: <a href="#Bash-Features" accesskey="u" rel="up">Bash Features</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Interactive-Shells-1"></span><h3 class="section">6.3 Interactive Shells</h3>
+<span id="index-interactive-shell-1"></span>
+<span id="index-shell_002c-interactive"></span>
+
+<table class="menu" border="0" cellspacing="0">
+<tr><td align="left" valign="top">&bull; <a href="#What-is-an-Interactive-Shell_003f" accesskey="1">What is an Interactive Shell?</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">What determines whether a shell is Interactive.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Is-this-Shell-Interactive_003f" accesskey="2">Is this Shell Interactive?</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How to tell if a shell is interactive.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Interactive-Shell-Behavior" accesskey="3">Interactive Shell Behavior</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">What changes in a interactive shell?
+</td></tr>
+</table>
+
+<hr>
+<span id="What-is-an-Interactive-Shell_003f"></span><div class="header">
+<p>
+Next: <a href="#Is-this-Shell-Interactive_003f" accesskey="n" rel="next">Is this Shell Interactive?</a>, Up: <a href="#Interactive-Shells" accesskey="u" rel="up">Interactive Shells</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="What-is-an-Interactive-Shell_003f-1"></span><h4 class="subsection">6.3.1 What is an Interactive Shell?</h4>
+
+<p>An interactive shell
+is one started without non-option arguments, unless <samp>-s</samp> is
+specified, without specifying the <samp>-c</samp> option, and
+whose input and error output are both
+connected to terminals (as determined by <code>isatty(3)</code>),
+or one started with the <samp>-i</samp> option.
+</p>
+<p>An interactive shell generally reads from and writes to a user&rsquo;s
+terminal.
+</p>
+<p>The <samp>-s</samp> invocation option may be used to set the positional parameters
+when an interactive shell is started.
+</p>
+<hr>
+<span id="Is-this-Shell-Interactive_003f"></span><div class="header">
+<p>
+Next: <a href="#Interactive-Shell-Behavior" accesskey="n" rel="next">Interactive Shell Behavior</a>, Previous: <a href="#What-is-an-Interactive-Shell_003f" accesskey="p" rel="prev">What is an Interactive Shell?</a>, Up: <a href="#Interactive-Shells" accesskey="u" rel="up">Interactive Shells</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Is-this-Shell-Interactive_003f-1"></span><h4 class="subsection">6.3.2 Is this Shell Interactive?</h4>
+
+<p>To determine within a startup script whether or not Bash is
+running interactively,
+test the value of the &lsquo;<samp>-</samp>&rsquo; special parameter.
+It contains <code>i</code> when the shell is interactive.  For example:
+</p>
+<div class="example">
+<pre class="example">case &quot;$-&quot; in
+*i*)	echo This shell is interactive ;;
+*)	echo This shell is not interactive ;;
+esac
+</pre></div>
+
+<p>Alternatively, startup scripts may examine the variable
+<code>PS1</code>; it is unset in non-interactive shells, and set in
+interactive shells.  Thus:
+</p>
+<div class="example">
+<pre class="example">if [ -z &quot;$PS1&quot; ]; then
+        echo This shell is not interactive
+else
+        echo This shell is interactive
+fi
+</pre></div>
+
+<hr>
+<span id="Interactive-Shell-Behavior"></span><div class="header">
+<p>
+Previous: <a href="#Is-this-Shell-Interactive_003f" accesskey="p" rel="prev">Is this Shell Interactive?</a>, Up: <a href="#Interactive-Shells" accesskey="u" rel="up">Interactive Shells</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Interactive-Shell-Behavior-1"></span><h4 class="subsection">6.3.3 Interactive Shell Behavior</h4>
+
+<p>When the shell is running interactively, it changes its behavior in
+several ways.
+</p>
+<ol>
+<li> Startup files are read and executed as described in <a href="#Bash-Startup-Files">Bash Startup Files</a>.
+
+</li><li> Job Control (see <a href="#Job-Control">Job Control</a>) is enabled by default.  When job
+control is in effect, Bash ignores the keyboard-generated job control
+signals <code>SIGTTIN</code>, <code>SIGTTOU</code>, and <code>SIGTSTP</code>.
+
+</li><li> Bash expands and displays <code>PS1</code> before reading the first line
+of a command, and expands and displays <code>PS2</code> before reading the
+second and subsequent lines of a multi-line command.
+Bash expands and displays <code>PS0</code> after it reads a command but before
+executing it.
+See <a href="#Controlling-the-Prompt">Controlling the Prompt</a>, for a complete list of prompt
+string escape sequences.
+
+</li><li> Bash executes the values of the set elements of the <code>PROMPT_COMMANDS</code>
+array variable as commands before printing the primary prompt, <code>$PS1</code>
+(see <a href="#Bash-Variables">Bash Variables</a>).
+
+</li><li> Readline (see <a href="#Command-Line-Editing">Command Line Editing</a>) is used to read commands from
+the user&rsquo;s terminal.
+
+</li><li> Bash inspects the value of the <code>ignoreeof</code> option to <code>set -o</code>
+instead of exiting immediately when it receives an <code>EOF</code> on its
+standard input when reading a command (see <a href="#The-Set-Builtin">The Set Builtin</a>).
+
+</li><li> Command history (see <a href="#Bash-History-Facilities">Bash History Facilities</a>)
+and history expansion (see <a href="#History-Interaction">History Interaction</a>)
+are enabled by default.
+Bash will save the command history to the file named by <code>$HISTFILE</code>
+when a shell with history enabled exits.
+
+</li><li> Alias expansion (see <a href="#Aliases">Aliases</a>) is performed by default.
+
+</li><li> In the absence of any traps, Bash ignores <code>SIGTERM</code>
+(see <a href="#Signals">Signals</a>).
+
+</li><li> In the absence of any traps, <code>SIGINT</code> is caught and handled
+(see <a href="#Signals">Signals</a>).
+<code>SIGINT</code> will interrupt some shell builtins.
+
+</li><li> An interactive login shell sends a <code>SIGHUP</code> to all jobs on exit
+if the <code>huponexit</code> shell option has been enabled (see <a href="#Signals">Signals</a>).
+
+</li><li> The <samp>-n</samp> invocation option is ignored, and &lsquo;<samp>set -n</samp>&rsquo; has
+no effect (see <a href="#The-Set-Builtin">The Set Builtin</a>).
+
+</li><li> Bash will check for mail periodically, depending on the values of the
+<code>MAIL</code>, <code>MAILPATH</code>, and <code>MAILCHECK</code> shell variables
+(see <a href="#Bash-Variables">Bash Variables</a>).
+
+</li><li> Expansion errors due to references to unbound shell variables after
+&lsquo;<samp>set -u</samp>&rsquo; has been enabled will not cause the shell to exit
+(see <a href="#The-Set-Builtin">The Set Builtin</a>).
+
+</li><li> The shell will not exit on expansion errors caused by <var>var</var> being unset
+or null in <code>${<var>var</var>:?<var>word</var>}</code> expansions
+(see <a href="#Shell-Parameter-Expansion">Shell Parameter Expansion</a>).
+
+</li><li> Redirection errors encountered by shell builtins will not cause the
+shell to exit.
+
+</li><li> When running in <small>POSIX</small> mode, a special builtin returning an error
+status will not cause the shell to exit (see <a href="#Bash-POSIX-Mode">Bash POSIX Mode</a>).
+
+</li><li> A failed <code>exec</code> will not cause the shell to exit
+(see <a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a>).
+
+</li><li> Parser syntax errors will not cause the shell to exit.
+
+</li><li> Simple spelling correction for directory arguments to the <code>cd</code>
+builtin is enabled by default (see the description of the <code>cdspell</code>
+option to the <code>shopt</code> builtin in <a href="#The-Shopt-Builtin">The Shopt Builtin</a>).
+
+</li><li> The shell will check the value of the <code>TMOUT</code> variable and exit
+if a command is not read within the specified number of seconds after
+printing <code>$PS1</code> (see <a href="#Bash-Variables">Bash Variables</a>).
+
+</li></ol>
+
+<hr>
+<span id="Bash-Conditional-Expressions"></span><div class="header">
+<p>
+Next: <a href="#Shell-Arithmetic" accesskey="n" rel="next">Shell Arithmetic</a>, Previous: <a href="#Interactive-Shells" accesskey="p" rel="prev">Interactive Shells</a>, Up: <a href="#Bash-Features" accesskey="u" rel="up">Bash Features</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Bash-Conditional-Expressions-1"></span><h3 class="section">6.4 Bash Conditional Expressions</h3>
+<span id="index-expressions_002c-conditional"></span>
+
+<p>Conditional expressions are used by the <code>[[</code> compound command
+and the <code>test</code> and <code>[</code> builtin commands. The <code>test</code>
+and <code>[</code> commands determine their behavior based on the number
+of arguments; see the descriptions of those commands for any other
+command-specific actions.
+</p>
+<p>Expressions may be unary or binary,
+and are formed from the following primaries.
+Unary expressions are often used to examine the status of a file.
+There are string operators and numeric comparison operators as well.
+Bash handles several filenames specially when they are used in
+expressions.
+If the operating system on which Bash is running provides these
+special files, Bash will use them; otherwise it will emulate them
+internally with this behavior:
+If the <var>file</var> argument to one of the primaries is of the form
+<samp>/dev/fd/<var>N</var></samp>, then file descriptor <var>N</var> is checked.
+If the <var>file</var> argument to one of the primaries is one of
+<samp>/dev/stdin</samp>, <samp>/dev/stdout</samp>, or <samp>/dev/stderr</samp>, file
+descriptor 0, 1, or 2, respectively, is checked.
+</p>
+<p>When used with <code>[[</code>, the &lsquo;<samp>&lt;</samp>&rsquo; and &lsquo;<samp>&gt;</samp>&rsquo; operators sort
+lexicographically using the current locale.
+The <code>test</code> command uses ASCII ordering.
+</p>
+<p>Unless otherwise specified, primaries that operate on files follow symbolic
+links and operate on the target of the link, rather than the link itself.
+</p>
+<dl compact="compact">
+<dt><code>-a <var>file</var></code></dt>
+<dd><p>True if <var>file</var> exists.
+</p>
+</dd>
+<dt><code>-b <var>file</var></code></dt>
+<dd><p>True if <var>file</var> exists and is a block special file.
+</p>
+</dd>
+<dt><code>-c <var>file</var></code></dt>
+<dd><p>True if <var>file</var> exists and is a character special file.
+</p>
+</dd>
+<dt><code>-d <var>file</var></code></dt>
+<dd><p>True if <var>file</var> exists and is a directory.
+</p>
+</dd>
+<dt><code>-e <var>file</var></code></dt>
+<dd><p>True if <var>file</var> exists.
+</p>
+</dd>
+<dt><code>-f <var>file</var></code></dt>
+<dd><p>True if <var>file</var> exists and is a regular file.
+</p>
+</dd>
+<dt><code>-g <var>file</var></code></dt>
+<dd><p>True if <var>file</var> exists and its set-group-id bit is set.
+</p>
+</dd>
+<dt><code>-h <var>file</var></code></dt>
+<dd><p>True if <var>file</var> exists and is a symbolic link.
+</p>
+</dd>
+<dt><code>-k <var>file</var></code></dt>
+<dd><p>True if <var>file</var> exists and its &quot;sticky&quot; bit is set.
+</p>
+</dd>
+<dt><code>-p <var>file</var></code></dt>
+<dd><p>True if <var>file</var> exists and is a named pipe (FIFO).
+</p>
+</dd>
+<dt><code>-r <var>file</var></code></dt>
+<dd><p>True if <var>file</var> exists and is readable.
+</p>
+</dd>
+<dt><code>-s <var>file</var></code></dt>
+<dd><p>True if <var>file</var> exists and has a size greater than zero.
+</p>
+</dd>
+<dt><code>-t <var>fd</var></code></dt>
+<dd><p>True if file descriptor <var>fd</var> is open and refers to a terminal.
+</p>
+</dd>
+<dt><code>-u <var>file</var></code></dt>
+<dd><p>True if <var>file</var> exists and its set-user-id bit is set.
+</p>
+</dd>
+<dt><code>-w <var>file</var></code></dt>
+<dd><p>True if <var>file</var> exists and is writable.
+</p>
+</dd>
+<dt><code>-x <var>file</var></code></dt>
+<dd><p>True if <var>file</var> exists and is executable.
+</p>
+</dd>
+<dt><code>-G <var>file</var></code></dt>
+<dd><p>True if <var>file</var> exists and is owned by the effective group id.
+</p>
+</dd>
+<dt><code>-L <var>file</var></code></dt>
+<dd><p>True if <var>file</var> exists and is a symbolic link.
+</p>
+</dd>
+<dt><code>-N <var>file</var></code></dt>
+<dd><p>True if <var>file</var> exists and has been modified since it was last read.
+</p>
+</dd>
+<dt><code>-O <var>file</var></code></dt>
+<dd><p>True if <var>file</var> exists and is owned by the effective user id.
+</p>
+</dd>
+<dt><code>-S <var>file</var></code></dt>
+<dd><p>True if <var>file</var> exists and is a socket.
+</p>
+</dd>
+<dt><code><var>file1</var> -ef <var>file2</var></code></dt>
+<dd><p>True if <var>file1</var> and <var>file2</var> refer to the same device and
+inode numbers.
+</p>
+</dd>
+<dt><code><var>file1</var> -nt <var>file2</var></code></dt>
+<dd><p>True if <var>file1</var> is newer (according to modification date)
+than <var>file2</var>, or if <var>file1</var> exists and <var>file2</var> does not.
+</p>
+</dd>
+<dt><code><var>file1</var> -ot <var>file2</var></code></dt>
+<dd><p>True if <var>file1</var> is older than <var>file2</var>,
+or if <var>file2</var> exists and <var>file1</var> does not.
+</p>
+</dd>
+<dt><code>-o <var>optname</var></code></dt>
+<dd><p>True if the shell option <var>optname</var> is enabled.
+The list of options appears in the description of the <samp>-o</samp>
+option to the <code>set</code> builtin (see <a href="#The-Set-Builtin">The Set Builtin</a>).
+</p>
+</dd>
+<dt><code>-v <var>varname</var></code></dt>
+<dd><p>True if the shell variable <var>varname</var> is set (has been assigned a value).
+</p>
+</dd>
+<dt><code>-R <var>varname</var></code></dt>
+<dd><p>True if the shell variable <var>varname</var> is set and is a name reference.
+</p>
+</dd>
+<dt><code>-z <var>string</var></code></dt>
+<dd><p>True if the length of <var>string</var> is zero.
+</p>
+</dd>
+<dt><code>-n <var>string</var></code></dt>
+<dt><code><var>string</var></code></dt>
+<dd><p>True if the length of <var>string</var> is non-zero.
+</p>
+</dd>
+<dt><code><var>string1</var> == <var>string2</var></code></dt>
+<dt><code><var>string1</var> = <var>string2</var></code></dt>
+<dd><p>True if the strings are equal.
+When used with the <code>[[</code> command, this performs pattern matching as
+described above (see <a href="#Conditional-Constructs">Conditional Constructs</a>).
+</p>
+<p>&lsquo;<samp>=</samp>&rsquo; should be used with the <code>test</code> command for <small>POSIX</small> conformance.
+</p>
+</dd>
+<dt><code><var>string1</var> != <var>string2</var></code></dt>
+<dd><p>True if the strings are not equal.
+</p>
+</dd>
+<dt><code><var>string1</var> &lt; <var>string2</var></code></dt>
+<dd><p>True if <var>string1</var> sorts before <var>string2</var> lexicographically.
+</p>
+</dd>
+<dt><code><var>string1</var> &gt; <var>string2</var></code></dt>
+<dd><p>True if <var>string1</var> sorts after <var>string2</var> lexicographically.
+</p>
+</dd>
+<dt><code><var>arg1</var> OP <var>arg2</var></code></dt>
+<dd><p><code>OP</code> is one of 
+&lsquo;<samp>-eq</samp>&rsquo;, &lsquo;<samp>-ne</samp>&rsquo;, &lsquo;<samp>-lt</samp>&rsquo;, &lsquo;<samp>-le</samp>&rsquo;, &lsquo;<samp>-gt</samp>&rsquo;, or &lsquo;<samp>-ge</samp>&rsquo;.
+These arithmetic binary operators return true if <var>arg1</var>
+is equal to, not equal to, less than, less than or equal to,
+greater than, or greater than or equal to <var>arg2</var>,
+respectively.  <var>Arg1</var> and <var>arg2</var>
+may be positive or negative integers.
+When used with the <code>[[</code> command, <var>Arg1</var> and <var>Arg2</var>
+are evaluated as arithmetic expressions (see <a href="#Shell-Arithmetic">Shell Arithmetic</a>).
+</p></dd>
+</dl>
+
+<hr>
+<span id="Shell-Arithmetic"></span><div class="header">
+<p>
+Next: <a href="#Aliases" accesskey="n" rel="next">Aliases</a>, Previous: <a href="#Bash-Conditional-Expressions" accesskey="p" rel="prev">Bash Conditional Expressions</a>, Up: <a href="#Bash-Features" accesskey="u" rel="up">Bash Features</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Shell-Arithmetic-1"></span><h3 class="section">6.5 Shell Arithmetic</h3>
+<span id="index-arithmetic_002c-shell"></span>
+<span id="index-shell-arithmetic"></span>
+<span id="index-expressions_002c-arithmetic"></span>
+<span id="index-evaluation_002c-arithmetic"></span>
+<span id="index-arithmetic-evaluation"></span>
+
+<p>The shell allows arithmetic expressions to be evaluated, as one of
+the shell expansions or by using the <code>((</code> compound command, the
+<code>let</code> builtin, or the <samp>-i</samp> option to the <code>declare</code> builtin.
+</p>
+<p>Evaluation is done in fixed-width integers with no check for overflow,
+though division by 0 is trapped and flagged as an error.
+The operators and their precedence, associativity, and values
+are the same as in the C language.
+The following list of operators is grouped into levels of
+equal-precedence operators.
+The levels are listed in order of decreasing precedence. 
+</p>
+<dl compact="compact">
+<dt><code><var>id</var>++ <var>id</var>--</code></dt>
+<dd><p>variable post-increment and post-decrement 
+</p>
+</dd>
+<dt><code>++<var>id</var> --<var>id</var></code></dt>
+<dd><p>variable pre-increment and pre-decrement
+</p>
+</dd>
+<dt><code>- +</code></dt>
+<dd><p>unary minus and plus
+</p>
+</dd>
+<dt><code>! ~</code></dt>
+<dd><p>logical and bitwise negation
+</p>
+</dd>
+<dt><code>**</code></dt>
+<dd><p>exponentiation
+</p>
+</dd>
+<dt><code>* / %</code></dt>
+<dd><p>multiplication, division, remainder
+</p>
+</dd>
+<dt><code>+ -</code></dt>
+<dd><p>addition, subtraction
+</p>
+</dd>
+<dt><code>&lt;&lt; &gt;&gt;</code></dt>
+<dd><p>left and right bitwise shifts
+</p>
+</dd>
+<dt><code>&lt;= &gt;= &lt; &gt;</code></dt>
+<dd><p>comparison
+</p>
+</dd>
+<dt><code>== !=</code></dt>
+<dd><p>equality and inequality
+</p>
+</dd>
+<dt><code>&amp;</code></dt>
+<dd><p>bitwise AND
+</p>
+</dd>
+<dt><code>^</code></dt>
+<dd><p>bitwise exclusive OR
+</p>
+</dd>
+<dt><code>|</code></dt>
+<dd><p>bitwise OR
+</p>
+</dd>
+<dt><code>&amp;&amp;</code></dt>
+<dd><p>logical AND
+</p>
+</dd>
+<dt><code>||</code></dt>
+<dd><p>logical OR
+</p>
+</dd>
+<dt><code>expr ? expr : expr</code></dt>
+<dd><p>conditional operator
+</p>
+</dd>
+<dt><code>= *= /= %= += -= &lt;&lt;= &gt;&gt;= &amp;= ^= |=</code></dt>
+<dd><p>assignment
+</p>
+</dd>
+<dt><code>expr1 , expr2</code></dt>
+<dd><p>comma
+</p></dd>
+</dl>
+
+<p>Shell variables are allowed as operands; parameter expansion is
+performed before the expression is evaluated. 
+Within an expression, shell variables may also be referenced by name
+without using the parameter expansion syntax.
+A shell variable that is null or unset evaluates to 0 when referenced
+by name without using the parameter expansion syntax.
+The value of a variable is evaluated as an arithmetic expression
+when it is referenced, or when a variable which has been given the  
+<var>integer</var> attribute using &lsquo;<samp>declare -i</samp>&rsquo; is assigned a value.
+A null value evaluates to 0.
+A shell variable need not have its <var>integer</var> attribute turned on
+to be used in an expression.
+</p>
+<p>Integer constants follow the C language definition, without suffixes or
+character constants.
+Constants with a leading 0 are interpreted as octal numbers.
+A leading &lsquo;<samp>0x</samp>&rsquo; or &lsquo;<samp>0X</samp>&rsquo; denotes hexadecimal.  Otherwise,
+numbers take the form [<var>base</var><code>#</code>]<var>n</var>, where the optional <var>base</var>
+is a decimal number between 2 and 64 representing the arithmetic
+base, and <var>n</var> is a number in that base.
+If <var>base</var><code>#</code> is omitted, then base 10 is used.
+When specifying <var>n</var>,
+if a non-digit is required,
+the digits greater than 9 are represented by the lowercase letters,
+the uppercase letters, &lsquo;<samp>@</samp>&rsquo;, and &lsquo;<samp>_</samp>&rsquo;, in that order.
+If <var>base</var> is less than or equal to 36, lowercase and uppercase
+letters may be used interchangeably to represent numbers between 10
+and 35.
+</p>
+<p>Operators are evaluated in order of precedence.  Sub-expressions in
+parentheses are evaluated first and may override the precedence
+rules above.
+</p>
+<hr>
+<span id="Aliases"></span><div class="header">
+<p>
+Next: <a href="#Arrays" accesskey="n" rel="next">Arrays</a>, Previous: <a href="#Shell-Arithmetic" accesskey="p" rel="prev">Shell Arithmetic</a>, Up: <a href="#Bash-Features" accesskey="u" rel="up">Bash Features</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Aliases-1"></span><h3 class="section">6.6 Aliases</h3>
+<span id="index-alias-expansion"></span>
+
+<p><var>Aliases</var> allow a string to be substituted for a word when it is used
+as the first word of a simple command.
+The shell maintains a list of aliases that may be set and unset with
+the <code>alias</code> and <code>unalias</code> builtin commands.
+</p>
+<p>The first word of each simple command, if unquoted, is checked to see
+if it has an alias.
+If so, that word is replaced by the text of the alias.
+The characters &lsquo;<samp>/</samp>&rsquo;, &lsquo;<samp>$</samp>&rsquo;, &lsquo;<samp>`</samp>&rsquo;, &lsquo;<samp>=</samp>&rsquo; and any of the
+shell metacharacters or quoting characters listed above may not appear
+in an alias name.
+The replacement text may contain any valid
+shell input, including shell metacharacters.
+The first word of the replacement text is tested for
+aliases, but a word that is identical to an alias being expanded
+is not expanded a second time.
+This means that one may alias <code>ls</code> to <code>&quot;ls -F&quot;</code>,
+for instance, and Bash does not try to recursively expand the
+replacement text.
+If the last character of the alias value is a
+<var>blank</var>, then the next command word following the
+alias is also checked for alias expansion.
+</p>
+<p>Aliases are created and listed with the <code>alias</code>
+command, and removed with the <code>unalias</code> command.
+</p>
+<p>There is no mechanism for using arguments in the replacement text,
+as in <code>csh</code>.
+If arguments are needed, a shell function should be used
+(see <a href="#Shell-Functions">Shell Functions</a>).
+</p>
+<p>Aliases are not expanded when the shell is not interactive,
+unless the <code>expand_aliases</code> shell option is set using
+<code>shopt</code> (see <a href="#The-Shopt-Builtin">The Shopt Builtin</a>).
+</p>
+<p>The rules concerning the definition and use of aliases are
+somewhat confusing. Bash
+always reads at least one complete line of input,
+and all lines that make up a compound command,
+before executing any of the commands on that line or the compound command.
+Aliases are expanded when a
+command is read, not when it is executed.  Therefore, an
+alias definition appearing on the same line as another
+command does not take effect until the next line of input is read.
+The commands following the alias definition
+on that line are not affected by the new alias.
+This behavior is also an issue when functions are executed.
+Aliases are expanded when a function definition is read,
+not when the function is executed, because a function definition
+is itself a command.  As a consequence, aliases
+defined in a function are not available until after that
+function is executed.  To be safe, always put
+alias definitions on a separate line, and do not use <code>alias</code>
+in compound commands.
+</p>
+<p>For almost every purpose, shell functions are preferred over aliases.
+</p>
+<hr>
+<span id="Arrays"></span><div class="header">
+<p>
+Next: <a href="#The-Directory-Stack" accesskey="n" rel="next">The Directory Stack</a>, Previous: <a href="#Aliases" accesskey="p" rel="prev">Aliases</a>, Up: <a href="#Bash-Features" accesskey="u" rel="up">Bash Features</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Arrays-1"></span><h3 class="section">6.7 Arrays</h3>
+<span id="index-arrays"></span>
+
+<p>Bash provides one-dimensional indexed and associative array variables.
+Any variable may be used as an indexed array;
+the <code>declare</code> builtin will explicitly declare an array.
+There is no maximum
+limit on the size of an array, nor any requirement that members
+be indexed or assigned contiguously.
+Indexed arrays are referenced using integers (including arithmetic
+expressions (see <a href="#Shell-Arithmetic">Shell Arithmetic</a>)) and are zero-based;
+associative arrays use arbitrary strings.
+Unless otherwise noted, indexed array indices must be non-negative integers.
+</p>
+<p>An indexed array is created automatically if any variable is assigned to
+using the syntax
+</p><div class="example">
+<pre class="example"><var>name</var>[<var>subscript</var>]=<var>value</var>
+</pre></div>
+
+<p>The <var>subscript</var>
+is treated as an arithmetic expression that must evaluate to a number.
+To explicitly declare an array, use
+</p><div class="example">
+<pre class="example">declare -a <var>name</var>
+</pre></div>
+<p>The syntax
+</p><div class="example">
+<pre class="example">declare -a <var>name</var>[<var>subscript</var>]
+</pre></div>
+<p>is also accepted; the <var>subscript</var> is ignored.
+</p>
+<p>Associative arrays are created using
+</p><div class="example">
+<pre class="example">declare -A <var>name</var>
+</pre></div>
+
+<p>Attributes may be
+specified for an array variable using the <code>declare</code> and
+<code>readonly</code> builtins.  Each attribute applies to all members of
+an array.
+</p>
+<p>Arrays are assigned to using compound assignments of the form
+</p><div class="example">
+<pre class="example"><var>name</var>=(<var>value1</var> <var>value2</var> &hellip; )
+</pre></div>
+<p>where each
+<var>value</var> may be of the form <code>[<var>subscript</var>]=</code><var>string</var>.
+Indexed array assignments do not require anything but <var>string</var>.
+When assigning to indexed arrays, if
+the optional subscript is supplied, that index is assigned to;
+otherwise the index of the element assigned is the last index assigned
+to by the statement plus one.  Indexing starts at zero.
+</p>
+<p>Each <var>value</var> in the list undergoes all the shell expansions
+described above (see <a href="#Shell-Expansions">Shell Expansions</a>).
+</p>
+<p>When assigning to an associative array, the words in a compound assignment
+may be either assignment statements, for which the subscript is required,
+or a list of words that is interpreted as a sequence of alternating keys
+and values:
+<var>name</var>=(<var>key1</var> <var>value1</var> <var>key2</var> <var>value2</var> &hellip; ).
+These are treated identically to
+<var>name</var>=( [<var>key1</var>]=<var>value1</var> [<var>key2</var>]=<var>value2</var> &hellip; ).
+The first word in the list determines how the remaining words
+are interpreted; all assignments in a list must be of the same type.
+When using key/value pairs, the keys may not be missing or empty;
+a final missing value is treated like the empty string.
+</p>
+<p>This syntax is also accepted by the <code>declare</code>
+builtin.  Individual array elements may be assigned to using the
+<code><var>name</var>[<var>subscript</var>]=<var>value</var></code> syntax introduced above.
+</p>
+<p>When assigning to an indexed array, if <var>name</var>
+is subscripted by a negative number, that number is
+interpreted as relative to one greater than the maximum index of
+<var>name</var>, so negative indices count back from the end of the
+array, and an index of -1 references the last element.
+</p>
+<p>Any element of an array may be referenced using
+<code>${<var>name</var>[<var>subscript</var>]}</code>.
+The braces are required to avoid
+conflicts with the shell&rsquo;s filename expansion operators.  If the
+<var>subscript</var> is &lsquo;<samp>@</samp>&rsquo; or &lsquo;<samp>*</samp>&rsquo;, the word expands to all members
+of the array <var>name</var>.  These subscripts differ only when the word
+appears within double quotes.
+If the word is double-quoted,
+<code>${<var>name</var>[*]}</code> expands to a single word with
+the value of each array member separated by the first character of the
+<code>IFS</code> variable, and <code>${<var>name</var>[@]}</code> expands each element of
+<var>name</var> to a separate word.  When there are no array members,
+<code>${<var>name</var>[@]}</code> expands to nothing.
+If the double-quoted expansion occurs within a word, the expansion of
+the first parameter is joined with the beginning part of the original
+word, and the expansion of the last parameter is joined with the last
+part of the original word.
+This is analogous to the
+expansion of the special parameters &lsquo;<samp>@</samp>&rsquo; and &lsquo;<samp>*</samp>&rsquo;. 
+<code>${#<var>name</var>[<var>subscript</var>]}</code> expands to the length of
+<code>${<var>name</var>[<var>subscript</var>]}</code>.
+If <var>subscript</var> is &lsquo;<samp>@</samp>&rsquo; or
+&lsquo;<samp>*</samp>&rsquo;, the expansion is the number of elements in the array. 
+If the <var>subscript</var>
+used to reference an element of an indexed array
+evaluates to a number less than zero, it is
+interpreted as relative to one greater than the maximum index of the array,
+so negative indices count back from the end of the array,
+and an index of -1 refers to the last element.
+</p>
+<p>Referencing an array variable without a subscript is equivalent to
+referencing with a subscript of 0.
+Any reference to a variable using a valid subscript is legal, and
+<code>bash</code> will create an array if necessary.
+</p>
+<p>An array variable is considered set if a subscript has been assigned a
+value.  The null string is a valid value.
+</p>
+<p>It is possible to obtain the keys (indices) of an array as well as the values.
+${!<var>name</var>[@]} and ${!<var>name</var>[*]} expand to the indices
+assigned in array variable <var>name</var>.
+The treatment when in double quotes is similar to the expansion of the
+special parameters &lsquo;<samp>@</samp>&rsquo; and &lsquo;<samp>*</samp>&rsquo; within double quotes.
+</p>
+<p>The <code>unset</code> builtin is used to destroy arrays.
+<code>unset <var>name</var>[<var>subscript</var>]</code>
+destroys the array element at index <var>subscript</var>.
+Negative subscripts to indexed arrays are interpreted as described above.
+Unsetting the last element of an array variable does not unset the variable.
+<code>unset <var>name</var></code>, where <var>name</var> is an array, removes the
+entire array.  A subscript of &lsquo;<samp>*</samp>&rsquo; or &lsquo;<samp>@</samp>&rsquo; also removes the
+entire array.
+</p>
+<p>When using a variable name with a subscript as an argument to a command,
+such as with <code>unset</code>, without using the word expansion syntax
+described above, the argument is subject to the shell&rsquo;s filename expansion.
+If filename expansion is not desired, the argument should be quoted.
+</p>
+<p>The <code>declare</code>, <code>local</code>, and <code>readonly</code>
+builtins each accept a <samp>-a</samp> option to specify an indexed
+array and a <samp>-A</samp> option to specify an associative array.
+If both options are supplied, <samp>-A</samp> takes precedence.
+The <code>read</code> builtin accepts a <samp>-a</samp>
+option to assign a list of words read from the standard input
+to an array, and can read values from the standard input into
+individual array elements.  The <code>set</code> and <code>declare</code>
+builtins display array values in a way that allows them to be
+reused as input.
+</p>
+<hr>
+<span id="The-Directory-Stack"></span><div class="header">
+<p>
+Next: <a href="#Controlling-the-Prompt" accesskey="n" rel="next">Controlling the Prompt</a>, Previous: <a href="#Arrays" accesskey="p" rel="prev">Arrays</a>, Up: <a href="#Bash-Features" accesskey="u" rel="up">Bash Features</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="The-Directory-Stack-1"></span><h3 class="section">6.8 The Directory Stack</h3>
+<span id="index-directory-stack"></span>
+
+<table class="menu" border="0" cellspacing="0">
+<tr><td align="left" valign="top">&bull; <a href="#Directory-Stack-Builtins" accesskey="1">Directory Stack Builtins</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Bash builtin commands to manipulate
+					the directory stack.
+</td></tr>
+</table>
+
+<p>The directory stack is a list of recently-visited directories.  The
+<code>pushd</code> builtin adds directories to the stack as it changes
+the current directory, and the <code>popd</code> builtin removes specified
+directories from the stack and changes the current directory to
+the directory removed.  The <code>dirs</code> builtin displays the contents
+of the directory stack.  The current directory is always the &quot;top&quot;
+of the directory stack.
+</p>
+<p>The contents of the directory stack are also visible
+as the value of the <code>DIRSTACK</code> shell variable.
+</p>
+<hr>
+<span id="Directory-Stack-Builtins"></span><div class="header">
+<p>
+Up: <a href="#The-Directory-Stack" accesskey="u" rel="up">The Directory Stack</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Directory-Stack-Builtins-1"></span><h4 class="subsection">6.8.1 Directory Stack Builtins</h4>
+
+<dl compact="compact">
+<dt><code>dirs</code></dt>
+<dd><span id="index-dirs"></span>
+<div class="example">
+<pre class="example">dirs [-clpv] [+<var>N</var> | -<var>N</var>]
+</pre></div>
+
+<p>Display the list of currently remembered directories.  Directories
+are added to the list with the <code>pushd</code> command; the
+<code>popd</code> command removes directories from the list.
+The current directory is always the first directory in the stack.
+</p>
+<dl compact="compact">
+<dt><code>-c</code></dt>
+<dd><p>Clears the directory stack by deleting all of the elements.
+</p></dd>
+<dt><code>-l</code></dt>
+<dd><p>Produces a listing using full pathnames;
+the default listing format uses a tilde to denote the home directory.
+</p></dd>
+<dt><code>-p</code></dt>
+<dd><p>Causes <code>dirs</code> to print the directory stack with one entry per
+line.
+</p></dd>
+<dt><code>-v</code></dt>
+<dd><p>Causes <code>dirs</code> to print the directory stack with one entry per
+line, prefixing each entry with its index in the stack.
+</p></dd>
+<dt><code>+<var>N</var></code></dt>
+<dd><p>Displays the <var>N</var>th directory (counting from the left of the
+list printed by <code>dirs</code> when invoked without options), starting
+with zero.
+</p></dd>
+<dt><code>-<var>N</var></code></dt>
+<dd><p>Displays the <var>N</var>th directory (counting from the right of the
+list printed by <code>dirs</code> when invoked without options), starting
+with zero.
+</p></dd>
+</dl>
+
+</dd>
+<dt><code>popd</code></dt>
+<dd><span id="index-popd"></span>
+<div class="example">
+<pre class="example">popd [-n] [+<var>N</var> | -<var>N</var>]
+</pre></div>
+
+<p>When no arguments are given, <code>popd</code>
+removes the top directory from the stack and
+performs a <code>cd</code> to the new top directory.
+The elements are numbered from 0 starting at the first directory
+listed with <code>dirs</code>; that is, <code>popd</code> is equivalent to <code>popd +0</code>.
+</p>
+<dl compact="compact">
+<dt><code>-n</code></dt>
+<dd><p>Suppresses the normal change of directory when removing directories
+from the stack, so that only the stack is manipulated.
+</p></dd>
+<dt><code>+<var>N</var></code></dt>
+<dd><p>Removes the <var>N</var>th directory (counting from the left of the
+list printed by <code>dirs</code>), starting with zero.
+</p></dd>
+<dt><code>-<var>N</var></code></dt>
+<dd><p>Removes the <var>N</var>th directory (counting from the right of the
+list printed by <code>dirs</code>), starting with zero.
+</p></dd>
+</dl>
+
+<span id="index-pushd"></span>
+</dd>
+<dt><code>pushd</code></dt>
+<dd><div class="example">
+<pre class="example">pushd [-n] [<var>+N</var> | <var>-N</var> | <var>dir</var>]
+</pre></div>
+
+<p>Save the current directory on the top of the directory stack
+and then <code>cd</code> to <var>dir</var>.
+With no arguments, <code>pushd</code> exchanges the top two directories
+and makes the new top the current directory.
+</p>
+<dl compact="compact">
+<dt><code>-n</code></dt>
+<dd><p>Suppresses the normal change of directory when rotating or
+adding directories to the stack, so that only the stack is manipulated.
+</p></dd>
+<dt><code>+<var>N</var></code></dt>
+<dd><p>Brings the <var>N</var>th directory (counting from the left of the
+list printed by <code>dirs</code>, starting with zero) to the top of
+the list by rotating the stack.
+</p></dd>
+<dt><code>-<var>N</var></code></dt>
+<dd><p>Brings the <var>N</var>th directory (counting from the right of the
+list printed by <code>dirs</code>, starting with zero) to the top of
+the list by rotating the stack.
+</p></dd>
+<dt><code><var>dir</var></code></dt>
+<dd><p>Makes <var>dir</var> be the top of the stack, making
+it the new current directory as if it had been supplied as an argument
+to the <code>cd</code> builtin.
+</p></dd>
+</dl>
+</dd>
+</dl>
+
+<hr>
+<span id="Controlling-the-Prompt"></span><div class="header">
+<p>
+Next: <a href="#The-Restricted-Shell" accesskey="n" rel="next">The Restricted Shell</a>, Previous: <a href="#The-Directory-Stack" accesskey="p" rel="prev">The Directory Stack</a>, Up: <a href="#Bash-Features" accesskey="u" rel="up">Bash Features</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Controlling-the-Prompt-1"></span><h3 class="section">6.9 Controlling the Prompt</h3>
+<span id="index-prompting"></span>
+
+<p>Bash examines the value of the array variable <code>PROMPT_COMMANDS</code> just before
+printing each primary prompt.
+If any elements in  <code>PROMPT_COMMANDS</code> are set and non-null, Bash
+executes each value, in numeric order,
+just as if it had been typed on the command line.
+</p>
+<p>In addition, the following table describes the special characters which
+can appear in the prompt variables <code>PS0</code>, <code>PS1</code>, <code>PS2</code>, and
+<code>PS4</code>:
+</p>
+<dl compact="compact">
+<dt><code>\a</code></dt>
+<dd><p>A bell character.
+</p></dd>
+<dt><code>\d</code></dt>
+<dd><p>The date, in &quot;Weekday Month Date&quot; format (e.g., &quot;Tue May 26&quot;).
+</p></dd>
+<dt><code>\D{<var>format</var>}</code></dt>
+<dd><p>The <var>format</var> is passed to <code>strftime</code>(3) and the result is inserted
+into the prompt string; an empty <var>format</var> results in a locale-specific
+time representation.  The braces are required.
+</p></dd>
+<dt><code>\e</code></dt>
+<dd><p>An escape character.
+</p></dd>
+<dt><code>\h</code></dt>
+<dd><p>The hostname, up to the first &lsquo;.&rsquo;.
+</p></dd>
+<dt><code>\H</code></dt>
+<dd><p>The hostname.
+</p></dd>
+<dt><code>\j</code></dt>
+<dd><p>The number of jobs currently managed by the shell.
+</p></dd>
+<dt><code>\l</code></dt>
+<dd><p>The basename of the shell&rsquo;s terminal device name.
+</p></dd>
+<dt><code>\n</code></dt>
+<dd><p>A newline.
+</p></dd>
+<dt><code>\r</code></dt>
+<dd><p>A carriage return.
+</p></dd>
+<dt><code>\s</code></dt>
+<dd><p>The name of the shell, the basename of <code>$0</code> (the portion
+following the final slash).
+</p></dd>
+<dt><code>\t</code></dt>
+<dd><p>The time, in 24-hour HH:MM:SS format.
+</p></dd>
+<dt><code>\T</code></dt>
+<dd><p>The time, in 12-hour HH:MM:SS format.
+</p></dd>
+<dt><code>\@</code></dt>
+<dd><p>The time, in 12-hour am/pm format.
+</p></dd>
+<dt><code>\A</code></dt>
+<dd><p>The time, in 24-hour HH:MM format.
+</p></dd>
+<dt><code>\u</code></dt>
+<dd><p>The username of the current user.
+</p></dd>
+<dt><code>\v</code></dt>
+<dd><p>The version of Bash (e.g., 2.00)          
+</p></dd>
+<dt><code>\V</code></dt>
+<dd><p>The release of Bash, version + patchlevel (e.g., 2.00.0)
+</p></dd>
+<dt><code>\w</code></dt>
+<dd><p>The current working directory, with <code>$HOME</code> abbreviated with a tilde
+(uses the <code>$PROMPT_DIRTRIM</code> variable).
+</p></dd>
+<dt><code>\W</code></dt>
+<dd><p>The basename of <code>$PWD</code>, with <code>$HOME</code> abbreviated with a tilde.
+</p></dd>
+<dt><code>\!</code></dt>
+<dd><p>The history number of this command.
+</p></dd>
+<dt><code>\#</code></dt>
+<dd><p>The command number of this command.
+</p></dd>
+<dt><code>\$</code></dt>
+<dd><p>If the effective uid is 0, <code>#</code>, otherwise <code>$</code>.
+</p></dd>
+<dt><code>\<var>nnn</var></code></dt>
+<dd><p>The character whose ASCII code is the octal value <var>nnn</var>.
+</p></dd>
+<dt><code>\\</code></dt>
+<dd><p>A backslash.
+</p></dd>
+<dt><code>\[</code></dt>
+<dd><p>Begin a sequence of non-printing characters.  This could be used to
+embed a terminal control sequence into the prompt.
+</p></dd>
+<dt><code>\]</code></dt>
+<dd><p>End a sequence of non-printing characters.
+</p></dd>
+</dl>
+
+<p>The command number and the history number are usually different:
+the history number of a command is its position in the history
+list, which may include commands restored from the history file
+(see <a href="#Bash-History-Facilities">Bash History Facilities</a>), while the command number is
+the position in the sequence of commands executed during the current
+shell session.
+</p>
+<p>After the string is decoded, it is expanded via
+parameter expansion, command substitution, arithmetic
+expansion, and quote removal, subject to the value of the
+<code>promptvars</code> shell option (see <a href="#The-Shopt-Builtin">The Shopt Builtin</a>).
+This can have unwanted side effects if escaped portions of the string
+appear within command substitution or contain characters special to
+word expansion.
+</p>
+<hr>
+<span id="The-Restricted-Shell"></span><div class="header">
+<p>
+Next: <a href="#Bash-POSIX-Mode" accesskey="n" rel="next">Bash POSIX Mode</a>, Previous: <a href="#Controlling-the-Prompt" accesskey="p" rel="prev">Controlling the Prompt</a>, Up: <a href="#Bash-Features" accesskey="u" rel="up">Bash Features</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="The-Restricted-Shell-1"></span><h3 class="section">6.10 The Restricted Shell</h3>
+<span id="index-restricted-shell"></span>
+
+<p>If Bash is started with the name <code>rbash</code>, or the
+<samp>--restricted</samp>
+or
+<samp>-r</samp>
+option is supplied at invocation, the shell becomes restricted.
+A restricted shell is used to
+set up an environment more controlled than the standard shell.
+A restricted shell behaves identically to <code>bash</code>
+with the exception that the following are disallowed or not performed:
+</p>
+<ul>
+<li> Changing directories with the <code>cd</code> builtin.
+</li><li> Setting or unsetting the values of the <code>SHELL</code>, <code>PATH</code>,
+<code>HISTFILE</code>,
+<code>ENV</code>, or <code>BASH_ENV</code> variables.
+</li><li> Specifying command names containing slashes.
+</li><li> Specifying a filename containing a slash as an argument to the <code>.</code>
+builtin command.
+</li><li> Specifying a filename containing a slash as an argument to the <code>history</code>
+builtin command.
+</li><li> Specifying a filename containing a slash as an argument to the <samp>-p</samp>
+option to the <code>hash</code> builtin command.
+</li><li> Importing function definitions from the shell environment at startup.
+</li><li> Parsing the value of <code>SHELLOPTS</code> from the shell environment at startup.
+</li><li> Redirecting output using the &lsquo;<samp>&gt;</samp>&rsquo;, &lsquo;<samp>&gt;|</samp>&rsquo;, &lsquo;<samp>&lt;&gt;</samp>&rsquo;, &lsquo;<samp>&gt;&amp;</samp>&rsquo;,
+&lsquo;<samp>&amp;&gt;</samp>&rsquo;, and &lsquo;<samp>&gt;&gt;</samp>&rsquo; redirection operators.
+</li><li> Using the <code>exec</code> builtin to replace the shell with another command.
+</li><li> Adding or deleting builtin commands with the
+<samp>-f</samp> and <samp>-d</samp> options to the <code>enable</code> builtin.
+</li><li> Using the <code>enable</code> builtin command to enable disabled shell builtins.
+</li><li> Specifying the <samp>-p</samp> option to the <code>command</code> builtin.
+</li><li> Turning off restricted mode with &lsquo;<samp>set +r</samp>&rsquo; or &lsquo;<samp>set +o restricted</samp>&rsquo;.
+</li></ul>
+
+<p>These restrictions are enforced after any startup files are read.
+</p>
+<p>When a command that is found to be a shell script is executed
+(see <a href="#Shell-Scripts">Shell Scripts</a>), <code>rbash</code> turns off any restrictions in
+the shell spawned to execute the script.
+</p>
+<p>The restricted shell mode is only one component of a useful restricted
+environment. It should be accompanied by setting <code>PATH</code> to a value
+that allows execution of only a few verified commands (commands that
+allow shell escapes are particularly vulnerable), leaving the user
+in a non-writable directory other than his home directory after login,
+not allowing the restricted shell to execute shell scripts, and cleaning
+the environment of variables that cause some commands to modify their
+behavior (e.g., <code>VISUAL</code> or <code>PAGER</code>).
+</p>
+<p>Modern systems provide more secure ways to implement a restricted environment,
+such as <code>jails</code>, <code>zones</code>, or <code>containers</code>.
+</p>
+
+<hr>
+<span id="Bash-POSIX-Mode"></span><div class="header">
+<p>
+Next: <a href="#Shell-Compatibility-Mode" accesskey="n" rel="next">Shell Compatibility Mode</a>, Previous: <a href="#The-Restricted-Shell" accesskey="p" rel="prev">The Restricted Shell</a>, Up: <a href="#Bash-Features" accesskey="u" rel="up">Bash Features</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Bash-POSIX-Mode-1"></span><h3 class="section">6.11 Bash POSIX Mode</h3>
+<span id="index-POSIX-Mode"></span>
+
+<p>Starting Bash with the <samp>--posix</samp> command-line option or executing
+&lsquo;<samp>set -o posix</samp>&rsquo; while Bash is running will cause Bash to conform more
+closely to the <small>POSIX</small> standard by changing the behavior to
+match that specified by <small>POSIX</small> in areas where the Bash default differs.
+</p>
+<p>When invoked as <code>sh</code>, Bash enters <small>POSIX</small> mode after reading the
+startup files.
+</p>
+<p>The following list is what&rsquo;s changed when &lsquo;<small>POSIX</small> mode&rsquo; is in effect:
+</p>
+<ol>
+<li> Bash ensures that the <code>POSIXLY_CORRECT</code> variable is set.
+
+</li><li> When a command in the hash table no longer exists, Bash will re-search
+<code>$PATH</code> to find the new location.  This is also available with
+&lsquo;<samp>shopt -s checkhash</samp>&rsquo;.
+
+</li><li> Bash will not insert a command without the execute bit set into the
+command hash table, even if it returns it as a (last-ditch) result
+from a <code>$PATH</code> search.
+
+</li><li> The message printed by the job control code and builtins when a job
+exits with a non-zero status is &lsquo;Done(status)&rsquo;.
+
+</li><li> The message printed by the job control code and builtins when a job
+is stopped is &lsquo;Stopped(<var>signame</var>)&rsquo;, where <var>signame</var> is, for
+example, <code>SIGTSTP</code>.
+
+</li><li> Alias expansion is always enabled, even in non-interactive shells.
+
+</li><li> Reserved words appearing in a context where reserved words are recognized
+do not undergo alias expansion.
+
+</li><li> The <small>POSIX</small> <code>PS1</code> and <code>PS2</code> expansions of &lsquo;<samp>!</samp>&rsquo; to
+the history number and &lsquo;<samp>!!</samp>&rsquo; to &lsquo;<samp>!</samp>&rsquo; are enabled,
+and parameter expansion is performed on the values of <code>PS1</code> and
+<code>PS2</code> regardless of the setting of the <code>promptvars</code> option.
+
+</li><li> The <small>POSIX</small> startup files are executed (<code>$ENV</code>) rather than
+the normal Bash files.
+
+</li><li> Tilde expansion is only performed on assignments preceding a command
+name, rather than on all assignment statements on the line.
+
+</li><li> The default history file is <samp>~/.sh_history</samp> (this is the
+default value of <code>$HISTFILE</code>).
+
+</li><li> Redirection operators do not perform filename expansion on the word
+in the redirection unless the shell is interactive.
+
+</li><li> Redirection operators do not perform word splitting on the word in the
+redirection.
+
+</li><li> Function names must be valid shell <code>name</code>s.  That is, they may not
+contain characters other than letters, digits, and underscores, and
+may not start with a digit.  Declaring a function with an invalid name
+causes a fatal syntax error in non-interactive shells.
+
+</li><li> Function names may not be the same as one of the <small>POSIX</small> special
+builtins.
+
+</li><li> <small>POSIX</small> special builtins are found before shell functions
+during command lookup.
+
+</li><li> When printing shell function definitions (e.g., by <code>type</code>), Bash does
+not print the <code>function</code> keyword.
+
+</li><li> Literal tildes that appear as the first character in elements of
+the <code>PATH</code> variable are not expanded as described above
+under <a href="#Tilde-Expansion">Tilde Expansion</a>.
+
+</li><li> The <code>time</code> reserved word may be used by itself as a command.  When
+used in this way, it displays timing statistics for the shell and its
+completed children.  The <code>TIMEFORMAT</code> variable controls the format
+of the timing information.
+
+</li><li> When parsing and expanding a ${&hellip;} expansion that appears within
+double quotes, single quotes are no longer special and cannot be used to
+quote a closing brace or other special character, unless the operator is
+one of those defined to perform pattern removal.  In this case, they do
+not have to appear as matched pairs.
+
+</li><li> The parser does not recognize <code>time</code> as a reserved word if the next
+token begins with a &lsquo;<samp>-</samp>&rsquo;.
+
+
+</li><li> The &lsquo;<samp>!</samp>&rsquo; character does not introduce history expansion within a
+double-quoted string, even if the <code>histexpand</code> option is enabled.
+
+</li><li> If a <small>POSIX</small> special builtin returns an error status, a
+non-interactive shell exits.  The fatal errors are those listed in
+the <small>POSIX</small> standard, and include things like passing incorrect options,
+redirection errors, variable assignment errors for assignments preceding
+the command name, and so on.
+
+</li><li> A non-interactive shell exits with an error status if a variable
+assignment error occurs when no command name follows the assignment
+statements.
+A variable assignment error occurs, for example, when trying to assign
+a value to a readonly variable.
+
+</li><li> A non-interactive shell exits with an error status if a variable
+assignment error occurs in an assignment statement preceding a special
+builtin, but not with any other simple command.
+
+</li><li> A non-interactive shell exits with an error status if the iteration
+variable in a <code>for</code> statement or the selection variable in a
+<code>select</code> statement is a readonly variable.
+
+</li><li> Non-interactive shells exit if <var>filename</var> in <code>.</code> <var>filename</var>
+is not found.
+
+</li><li> Non-interactive shells exit if a syntax error in an arithmetic expansion
+results in an invalid expression.
+
+</li><li> Non-interactive shells exit if a parameter expansion error occurs.
+
+</li><li> Non-interactive shells exit if there is a syntax error in a script read
+with the <code>.</code> or <code>source</code> builtins, or in a string processed by
+the <code>eval</code> builtin.
+
+</li><li> While variable indirection is available, it may not be applied to the
+&lsquo;<samp>#</samp>&rsquo; and &lsquo;<samp>?</samp>&rsquo; special parameters.
+
+</li><li> When expanding the &lsquo;<samp>*</samp>&rsquo; special parameter in a pattern context where the
+expansion is double-quoted does not treat the <code>$*</code> as if it were
+double-quoted.
+
+</li><li> Assignment statements preceding <small>POSIX</small> special builtins
+persist in the shell environment after the builtin completes.
+
+</li><li> The <code>command</code> builtin does not prevent builtins that take assignment
+statements as arguments from expanding them as assignment statements;
+when not in <small>POSIX</small> mode, assignment builtins lose their assignment
+statement expansion properties when preceded by <code>command</code>.
+
+</li><li> The <code>bg</code> builtin uses the required format to describe each job placed
+in the background, which does not include an indication of whether the job
+is the current or previous job.
+
+</li><li> The output of &lsquo;<samp>kill -l</samp>&rsquo; prints all the signal names on a single line,
+separated by spaces, without the &lsquo;<samp>SIG</samp>&rsquo; prefix.
+
+</li><li> The <code>kill</code> builtin does not accept signal names with a &lsquo;<samp>SIG</samp>&rsquo;
+prefix.
+
+</li><li> The <code>export</code> and <code>readonly</code> builtin commands display their
+output in the format required by <small>POSIX</small>.
+
+</li><li> The <code>trap</code> builtin displays signal names without the leading
+<code>SIG</code>.
+
+</li><li> The <code>trap</code> builtin doesn&rsquo;t check the first argument for a possible
+signal specification and revert the signal handling to the original
+disposition if it is, unless that argument consists solely of digits and
+is a valid signal number.  If users want to reset the handler for a given
+signal to the original disposition, they should use &lsquo;<samp>-</samp>&rsquo; as the
+first argument.
+
+</li><li> <code>trap -p</code> displays signals whose dispositions are set to SIG_DFL and
+those that were ignored when the shell started.
+
+</li><li> The <code>.</code> and <code>source</code> builtins do not search the current directory
+for the filename argument if it is not found by searching <code>PATH</code>.
+
+</li><li> Enabling <small>POSIX</small> mode has the effect of setting the
+<code>inherit_errexit</code> option, so
+subshells spawned to execute command substitutions inherit the value of
+the <samp>-e</samp> option from the parent shell.
+When the <code>inherit_errexit</code> option is not enabled,
+Bash clears the <samp>-e</samp> option in such subshells.
+
+</li><li> Enabling <small>POSIX</small> mode has the effect of setting the
+<code>shift_verbose</code> option, so numeric arguments to <code>shift</code>
+that exceed the number of positional parameters will result in an
+error message.
+
+</li><li> When the <code>alias</code> builtin displays alias definitions, it does not
+display them with a leading &lsquo;<samp>alias </samp>&rsquo; unless the <samp>-p</samp> option
+is supplied.
+
+</li><li> When the <code>set</code> builtin is invoked without options, it does not display
+shell function names and definitions.
+
+</li><li> When the <code>set</code> builtin is invoked without options, it displays
+variable values without quotes, unless they contain shell metacharacters,
+even if the result contains nonprinting characters.
+
+</li><li> When the <code>cd</code> builtin is invoked in <var>logical</var> mode, and the pathname
+constructed from <code>$PWD</code> and the directory name supplied as an argument
+does not refer to an existing directory, <code>cd</code> will fail instead of
+falling back to <var>physical</var> mode.
+
+</li><li> When the <code>cd</code> builtin cannot change a directory because the
+length of the pathname 
+constructed from <code>$PWD</code> and the directory name supplied as an argument
+exceeds <var>PATH_MAX</var> when all symbolic links are expanded, <code>cd</code> will
+fail instead of attempting to use only the supplied directory name.
+
+</li><li> The <code>pwd</code> builtin verifies that the value it prints is the same as the
+current directory, even if it is not asked to check the file system with the
+<samp>-P</samp> option.
+
+</li><li> When listing the history, the <code>fc</code> builtin does not include an
+indication of whether or not a history entry has been modified.
+
+</li><li> The default editor used by <code>fc</code> is <code>ed</code>.
+
+</li><li> The <code>type</code> and <code>command</code> builtins will not report a non-executable
+file as having been found, though the shell will attempt to execute such a
+file if it is the only so-named file found in <code>$PATH</code>.
+
+</li><li> The <code>vi</code> editing mode will invoke the <code>vi</code> editor directly when
+the &lsquo;<samp>v</samp>&rsquo; command is run, instead of checking <code>$VISUAL</code> and
+<code>$EDITOR</code>.
+
+</li><li> When the <code>xpg_echo</code> option is enabled, Bash does not attempt to interpret
+any arguments to <code>echo</code> as options.  Each argument is displayed, after
+escape characters are converted.
+
+</li><li> The <code>ulimit</code> builtin uses a block size of 512 bytes for the <samp>-c</samp>
+and <samp>-f</samp> options.
+
+</li><li> The arrival of <code>SIGCHLD</code>  when a trap is set on <code>SIGCHLD</code> does
+not interrupt the <code>wait</code> builtin and cause it to return immediately.
+The trap command is run once for each child that exits.
+
+</li><li> The <code>read</code> builtin may be interrupted by a signal for which a trap
+has been set.
+If Bash receives a trapped signal while executing <code>read</code>, the trap
+handler executes and <code>read</code> returns an exit status greater than 128.
+
+</li><li> Bash removes an exited background process&rsquo;s status from the list of such
+statuses after the <code>wait</code> builtin is used to obtain it.
+
+</li></ol>
+
+<p>There is other <small>POSIX</small> behavior that Bash does not implement by
+default even when in <small>POSIX</small> mode.
+Specifically:
+</p>
+<ol>
+<li> The <code>fc</code> builtin checks <code>$EDITOR</code> as a program to edit history
+entries if <code>FCEDIT</code> is unset, rather than defaulting directly to
+<code>ed</code>.  <code>fc</code> uses <code>ed</code> if <code>EDITOR</code> is unset.
+
+</li><li> As noted above, Bash requires the <code>xpg_echo</code> option to be enabled for
+the <code>echo</code> builtin to be fully conformant.
+
+</li></ol>
+
+<p>Bash can be configured to be <small>POSIX</small>-conformant by default, by specifying
+the <samp>--enable-strict-posix-default</samp> to <code>configure</code> when building
+(see <a href="#Optional-Features">Optional Features</a>).
+</p>
+<hr>
+<span id="Shell-Compatibility-Mode"></span><div class="header">
+<p>
+Previous: <a href="#Bash-POSIX-Mode" accesskey="p" rel="prev">Bash POSIX Mode</a>, Up: <a href="#Bash-Features" accesskey="u" rel="up">Bash Features</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Shell-Compatibility-Mode-1"></span><h3 class="section">6.12 Shell Compatibility Mode</h3>
+<span id="index-Compatibility-Level"></span>
+<span id="index-Compatibility-Mode"></span>
+
+<p>Bash-4.0 introduced the concept of a &lsquo;shell compatibility level&rsquo;, specified
+as a set of options to the shopt builtin
+(<code>compat31</code>,
+<code>compat32</code>,
+<code>compat40</code>,
+<code>compat41</code>,
+and so on).
+There is only one current
+compatibility level &ndash; each option is mutually exclusive.
+The compatibility level is intended to allow users to select behavior
+from previous versions that is incompatible with newer versions
+while they migrate scripts to use current features and
+behavior. It&rsquo;s intended to be a temporary solution.
+</p>
+<p>This section does not mention behavior that is standard for a particular
+version (e.g., setting <code>compat32</code> means that quoting the rhs of the regexp
+matching operator quotes special regexp characters in the word, which is
+default behavior in bash-3.2 and above). 
+</p>
+<p>If a user enables, say, <code>compat32</code>, it may affect the behavior of other
+compatibility levels up to and including the current compatibility level.
+The idea is that each compatibility level controls behavior that changed
+in that version of Bash,
+but that behavior may have been present in earlier versions.
+For instance, the change to use locale-based comparisons with the <code>[[</code>
+command came in bash-4.1, and earlier versions used ASCII-based comparisons,
+so enabling <code>compat32</code> will enable ASCII-based comparisons as well.
+That granularity may not be sufficient for
+all uses, and as a result users should employ compatibility levels carefully.
+Read the documentation for a particular feature to find out the
+current behavior.
+</p>
+<p>Bash-4.3 introduced a new shell variable: <code>BASH_COMPAT</code>.
+The value assigned
+to this variable (a decimal version number like 4.2, or an integer
+corresponding to the <code>compat</code><var>NN</var> option, like 42) determines the
+compatibility level.
+</p>
+<p>Starting with bash-4.4, Bash has begun deprecating older compatibility
+levels.
+Eventually, the options will be removed in favor of <code>BASH_COMPAT</code>.
+</p>
+<p>Bash-5.0 is the final version for which there will be an individual shopt
+option for the previous version. Users should use <code>BASH_COMPAT</code>
+on bash-5.0 and later versions.
+</p>
+<p>The following table describes the behavior changes controlled by each
+compatibility level setting.
+The <code>compat</code><var>NN</var> tag is used as shorthand for setting the
+compatibility level
+to <var>NN</var> using one of the following mechanisms.
+For versions prior to bash-5.0, the compatibility level may be set using
+the corresponding <code>compat</code><var>NN</var> shopt option.
+For bash-4.3 and later versions, the <code>BASH_COMPAT</code> variable is preferred,
+and it is required for bash-5.1 and later versions.
+</p>
+<dl compact="compact">
+<dt><code>compat31</code></dt>
+<dd><ul>
+<li> quoting the rhs of the <code>[[</code> command&rsquo;s regexp matching operator (=~)
+has no special effect
+</li></ul>
+
+</dd>
+<dt><code>compat32</code></dt>
+<dd><ul>
+<li> interrupting a command list such as &quot;a ; b ; c&quot; causes the execution
+of the next command in the list (in bash-4.0 and later versions,
+the shell acts as if it received the interrupt, so
+interrupting one command in a list aborts the execution of the
+entire list)
+</li></ul>
+
+</dd>
+<dt><code>compat40</code></dt>
+<dd><ul>
+<li> the &lsquo;<samp>&lt;</samp>&rsquo; and &lsquo;<samp>&gt;</samp>&rsquo; operators to the <code>[[</code> command do not
+consider the current locale when comparing strings; they use ASCII
+ordering.
+Bash versions prior to bash-4.1 use ASCII collation and strcmp(3);
+bash-4.1 and later use the current locale&rsquo;s collation sequence and
+strcoll(3).
+</li></ul>
+
+</dd>
+<dt><code>compat41</code></dt>
+<dd><ul>
+<li> in posix mode, <code>time</code> may be followed by options and still be
+recognized as a reserved word (this is <small>POSIX</small> interpretation 267)
+</li><li> in posix mode, the parser requires that an even number of single
+quotes occur in the <var>word</var> portion of a double-quoted ${&hellip;}
+parameter expansion and treats them specially, so that characters within
+the single quotes are considered quoted
+(this is <small>POSIX</small> interpretation 221)
+</li></ul>
+
+</dd>
+<dt><code>compat42</code></dt>
+<dd><ul>
+<li> the replacement string in double-quoted pattern substitution does not
+undergo quote removal, as it does in versions after bash-4.2
+</li><li> in posix mode, single quotes are considered special when expanding
+the <var>word</var> portion of a double-quoted ${&hellip;} parameter expansion
+and can be used to quote a closing brace or other special character
+(this is part of <small>POSIX</small> interpretation 221);
+in later versions, single quotes
+are not special within double-quoted word expansions
+</li></ul>
+
+</dd>
+<dt><code>compat43</code></dt>
+<dd><ul>
+<li> the shell does not print a warning message if an attempt is made to
+use a quoted compound assignment as an argument to declare
+(declare -a foo=&rsquo;(1 2)&rsquo;). Later versions warn that this usage is
+deprecated
+</li><li> word expansion errors are considered non-fatal errors that cause the
+current command to fail, even in posix mode
+(the default behavior is to make them fatal errors that cause the shell
+to exit)
+</li><li> when executing a shell function, the loop state (while/until/etc.)
+is not reset, so <code>break</code> or <code>continue</code> in that function will break
+or continue loops in the calling context. Bash-4.4 and later reset
+the loop state to prevent this
+</li></ul>
+
+</dd>
+<dt><code>compat44</code></dt>
+<dd><ul>
+<li> the shell sets up the values used by <code>BASH_ARGV</code> and <code>BASH_ARGC</code>
+so they can expand to the shell&rsquo;s positional parameters even if extended
+debugging mode is not enabled
+</li><li> a subshell inherits loops from its parent context, so <code>break</code>
+or <code>continue</code> will cause the subshell to exit.
+Bash-5.0 and later reset the loop state to prevent the exit
+</li><li> variable assignments preceding builtins like <code>export</code> and <code>readonly</code>
+that set attributes continue to affect variables with the same
+name in the calling environment even if the shell is not in posix
+mode
+</li></ul>
+
+</dd>
+<dt><code>compat50 (set using BASH_COMPAT)</code></dt>
+<dd><ul>
+<li> Bash-5.1 changed the way <code>$RANDOM</code> is generated to introduce slightly
+more randomness. If the shell compatibility level is set to 50 or
+lower, it reverts to the method from bash-5.0 and previous versions,
+so seeding the random number generator by assigning a value to
+<code>RANDOM</code> will produce the same sequence as in bash-5.0
+</li><li> If the command hash table is empty, Bash versions prior to bash-5.1
+printed an informational message to that effect, even when producing
+output that can be reused as input. Bash-5.1 suppresses that message
+when the <samp>-l</samp> option is supplied.
+</li></ul>
+</dd>
+</dl>
+
+<hr>
+<span id="Job-Control"></span><div class="header">
+<p>
+Next: <a href="#Command-Line-Editing" accesskey="n" rel="next">Command Line Editing</a>, Previous: <a href="#Bash-Features" accesskey="p" rel="prev">Bash Features</a>, Up: <a href="#Top" accesskey="u" rel="up">Top</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Job-Control-1"></span><h2 class="chapter">7 Job Control</h2>
+
+<p>This chapter discusses what job control is, how it works, and how
+Bash allows you to access its facilities.
+</p>
+<table class="menu" border="0" cellspacing="0">
+<tr><td align="left" valign="top">&bull; <a href="#Job-Control-Basics" accesskey="1">Job Control Basics</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How job control works.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Job-Control-Builtins" accesskey="2">Job Control Builtins</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Bash builtin commands used to interact
+				with job control.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Job-Control-Variables" accesskey="3">Job Control Variables</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Variables Bash uses to customize job
+				control.
+</td></tr>
+</table>
+
+<hr>
+<span id="Job-Control-Basics"></span><div class="header">
+<p>
+Next: <a href="#Job-Control-Builtins" accesskey="n" rel="next">Job Control Builtins</a>, Up: <a href="#Job-Control" accesskey="u" rel="up">Job Control</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Job-Control-Basics-1"></span><h3 class="section">7.1 Job Control Basics</h3>
+<span id="index-job-control-1"></span>
+<span id="index-foreground"></span>
+<span id="index-background"></span>
+<span id="index-suspending-jobs"></span>
+
+<p>Job control
+refers to the ability to selectively stop (suspend)
+the execution of processes and continue (resume)
+their execution at a later point.  A user typically employs
+this facility via an interactive interface supplied jointly
+by the operating system kernel&rsquo;s terminal driver and Bash.
+</p>
+<p>The shell associates a <var>job</var> with each pipeline.  It keeps a
+table of currently executing jobs, which may be listed with the
+<code>jobs</code> command.  When Bash starts a job
+asynchronously, it prints a line that looks
+like:
+</p><div class="example">
+<pre class="example">[1] 25647
+</pre></div>
+<p>indicating that this job is job number 1 and that the process <small>ID</small>
+of the last process in the pipeline associated with this job is
+25647.  All of the processes in a single pipeline are members of
+the same job.  Bash uses the <var>job</var> abstraction as the
+basis for job control. 
+</p>
+<p>To facilitate the implementation of the user interface to job
+control, the operating system maintains the notion of a current terminal
+process group <small>ID</small>.  Members of this process group (processes whose
+process group <small>ID</small> is equal to the current terminal process group
+<small>ID</small>) receive keyboard-generated signals such as <code>SIGINT</code>. 
+These processes are said to be in the foreground.  Background
+processes are those whose process group <small>ID</small> differs from the
+terminal&rsquo;s; such processes are immune to keyboard-generated
+signals.  Only foreground processes are allowed to read from or, if
+the user so specifies with <code>stty tostop</code>, write to the terminal.
+Background processes which attempt to
+read from (write to when <code>stty tostop</code> is in effect) the
+terminal are sent a <code>SIGTTIN</code> (<code>SIGTTOU</code>)
+signal by the kernel&rsquo;s terminal driver,
+which, unless caught, suspends the process. 
+</p>
+<p>If the operating system on which Bash is running supports
+job control, Bash contains facilities to use it.  Typing the
+<var>suspend</var> character (typically &lsquo;<samp>^Z</samp>&rsquo;, Control-Z) while a
+process is running causes that process to be stopped and returns
+control to Bash.  Typing the <var>delayed suspend</var> character
+(typically &lsquo;<samp>^Y</samp>&rsquo;, Control-Y) causes the process to be stopped
+when it attempts to read input from the terminal, and control to
+be returned to Bash.  The user then manipulates the state of
+this job, using the <code>bg</code> command to continue it in the
+background, the <code>fg</code> command to continue it in the
+foreground, or the <code>kill</code> command to kill it.  A &lsquo;<samp>^Z</samp>&rsquo;
+takes effect immediately, and has the additional side effect of
+causing pending output and typeahead to be discarded. 
+</p>
+<p>There are a number of ways to refer to a job in the shell.  The
+character &lsquo;<samp>%</samp>&rsquo; introduces a job specification (<var>jobspec</var>).
+</p>
+<p>Job number <code>n</code> may be referred to as &lsquo;<samp>%n</samp>&rsquo;.
+The symbols &lsquo;<samp>%%</samp>&rsquo; and  &lsquo;<samp>%+</samp>&rsquo; refer to the shell&rsquo;s notion of the
+current job, which is the last job stopped while it was in the foreground
+or started in the background.
+A single &lsquo;<samp>%</samp>&rsquo; (with no accompanying job specification) also refers
+to the current job.
+The previous job may be referenced using &lsquo;<samp>%-</samp>&rsquo;.
+If there is only a single job, &lsquo;<samp>%+</samp>&rsquo; and &lsquo;<samp>%-</samp>&rsquo; can both be used
+to refer to that job.
+In output pertaining to jobs (e.g., the output of the <code>jobs</code>
+command), the current job is always flagged with a &lsquo;<samp>+</samp>&rsquo;, and the
+previous job with a &lsquo;<samp>-</samp>&rsquo;. 
+</p>
+<p>A job may also be referred to
+using a prefix of the name used to start it, or using a substring
+that appears in its command line.  For example, &lsquo;<samp>%ce</samp>&rsquo; refers
+to a stopped job whose command name begins with &lsquo;<samp>ce</samp>&rsquo;.
+Using &lsquo;<samp>%?ce</samp>&rsquo;, on the
+other hand, refers to any job containing the string &lsquo;<samp>ce</samp>&rsquo; in
+its command line.  If the prefix or substring matches more than one job,
+Bash reports an error.
+</p>
+<p>Simply naming a job can be used to bring it into the foreground:
+&lsquo;<samp>%1</samp>&rsquo; is a synonym for &lsquo;<samp>fg %1</samp>&rsquo;, bringing job 1 from the
+background into the foreground.  Similarly, &lsquo;<samp>%1 &amp;</samp>&rsquo; resumes
+job 1 in the background, equivalent to &lsquo;<samp>bg %1</samp>&rsquo;
+</p>
+<p>The shell learns immediately whenever a job changes state. 
+Normally, Bash waits until it is about to print a prompt
+before reporting changes in a job&rsquo;s status so as to not interrupt
+any other output.
+If the <samp>-b</samp> option to the <code>set</code> builtin is enabled,
+Bash reports such changes immediately (see <a href="#The-Set-Builtin">The Set Builtin</a>).
+Any trap on <code>SIGCHLD</code> is executed for each child process
+that exits.
+</p>
+<p>If an attempt to exit Bash is made while jobs are stopped, (or running, if
+the <code>checkjobs</code> option is enabled &ndash; see <a href="#The-Shopt-Builtin">The Shopt Builtin</a>), the
+shell prints a warning message, and if the <code>checkjobs</code> option is
+enabled, lists the jobs and their statuses.
+The <code>jobs</code> command may then be used to inspect their status.
+If a second attempt to exit is made without an intervening command,
+Bash does not print another warning, and any stopped jobs are terminated.
+</p>
+<p>When the shell is waiting for a job or process using the <code>wait</code>
+builtin, and job control is enabled, <code>wait</code> will return when the
+job changes state. The <samp>-f</samp> option causes <code>wait</code> to wait
+until the job or process terminates before returning.
+</p>
+<hr>
+<span id="Job-Control-Builtins"></span><div class="header">
+<p>
+Next: <a href="#Job-Control-Variables" accesskey="n" rel="next">Job Control Variables</a>, Previous: <a href="#Job-Control-Basics" accesskey="p" rel="prev">Job Control Basics</a>, Up: <a href="#Job-Control" accesskey="u" rel="up">Job Control</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Job-Control-Builtins-1"></span><h3 class="section">7.2 Job Control Builtins</h3>
+
+<dl compact="compact">
+<dt><code>bg</code></dt>
+<dd><span id="index-bg"></span>
+<div class="example">
+<pre class="example">bg [<var>jobspec</var> &hellip;]
+</pre></div>
+
+<p>Resume each suspended job <var>jobspec</var> in the background, as if it
+had been started with &lsquo;<samp>&amp;</samp>&rsquo;.
+If <var>jobspec</var> is not supplied, the current job is used.
+The return status is zero unless it is run when job control is not
+enabled, or, when run with job control enabled, any
+<var>jobspec</var> was not found or specifies a job
+that was started without job control.
+</p>
+</dd>
+<dt><code>fg</code></dt>
+<dd><span id="index-fg"></span>
+<div class="example">
+<pre class="example">fg [<var>jobspec</var>]
+</pre></div>
+
+<p>Resume the job <var>jobspec</var> in the foreground and make it the current job.
+If <var>jobspec</var> is not supplied, the current job is used.
+The return status is that of the command placed into the foreground,
+or non-zero if run when job control is disabled or, when run with
+job control enabled, <var>jobspec</var> does not specify a valid job or
+<var>jobspec</var> specifies a job that was started without job control.
+</p>
+</dd>
+<dt><code>jobs</code></dt>
+<dd><span id="index-jobs"></span>
+<div class="example">
+<pre class="example">jobs [-lnprs] [<var>jobspec</var>]
+jobs -x <var>command</var> [<var>arguments</var>]
+</pre></div>
+
+<p>The first form lists the active jobs.  The options have the
+following meanings:
+</p>
+<dl compact="compact">
+<dt><code>-l</code></dt>
+<dd><p>List process <small>ID</small>s in addition to the normal information.
+</p>
+</dd>
+<dt><code>-n</code></dt>
+<dd><p>Display information only about jobs that have changed status since
+the user was last notified of their status.
+</p>
+</dd>
+<dt><code>-p</code></dt>
+<dd><p>List only the process <small>ID</small> of the job&rsquo;s process group leader.
+</p>
+</dd>
+<dt><code>-r</code></dt>
+<dd><p>Display only running jobs.
+</p>
+</dd>
+<dt><code>-s</code></dt>
+<dd><p>Display only stopped jobs.
+</p></dd>
+</dl>
+
+<p>If <var>jobspec</var> is given,
+output is restricted to information about that job. 
+If <var>jobspec</var> is not supplied, the status of all jobs is
+listed.
+</p>
+<p>If the <samp>-x</samp> option is supplied, <code>jobs</code> replaces any
+<var>jobspec</var> found in <var>command</var> or <var>arguments</var> with the
+corresponding process group <small>ID</small>, and executes <var>command</var>,
+passing it <var>argument</var>s, returning its exit status. 
+</p>
+</dd>
+<dt><code>kill</code></dt>
+<dd><span id="index-kill"></span>
+<div class="example">
+<pre class="example">kill [-s <var>sigspec</var>] [-n <var>signum</var>] [-<var>sigspec</var>] <var>jobspec</var> or <var>pid</var>
+kill -l|-L [<var>exit_status</var>]
+</pre></div>
+
+<p>Send a signal specified by <var>sigspec</var> or <var>signum</var> to the process
+named by job specification <var>jobspec</var> or process <small>ID</small> <var>pid</var>.
+<var>sigspec</var> is either a case-insensitive signal name such as
+<code>SIGINT</code> (with or without the <code>SIG</code> prefix)
+or a signal number; <var>signum</var> is a signal number.
+If <var>sigspec</var> and <var>signum</var> are not present, <code>SIGTERM</code> is used.
+The <samp>-l</samp> option lists the signal names.
+If any arguments are supplied when <samp>-l</samp> is given, the names of the
+signals corresponding to the arguments are listed, and the return status
+is zero.
+<var>exit_status</var> is a number specifying a signal number or the exit
+status of a process terminated by a signal.
+The <samp>-L</samp> option is equivalent to <samp>-l</samp>.
+The return status is zero if at least one signal was successfully sent,
+or non-zero if an error occurs or an invalid option is encountered.
+</p>
+</dd>
+<dt><code>wait</code></dt>
+<dd><span id="index-wait"></span>
+<div class="example">
+<pre class="example">wait [-fn] [-p <var>varname</var>] [<var>jobspec</var> or <var>pid</var> &hellip;]
+</pre></div>
+
+<p>Wait until the child process specified by each process <small>ID</small> <var>pid</var>
+or job specification <var>jobspec</var> exits and return the exit status of the
+last command waited for.
+If a job spec is given, all processes in the job are waited for.
+If no arguments are given,
+<code>wait</code> waits for all running background jobs and
+the last-executed process substitution, if its process id is the same as
+<var>$!</var>,
+and the return status is zero.
+If the <samp>-n</samp> option is supplied, <code>wait</code> waits for a single job
+from the list of <var>pids</var> or <var>jobspecs</var> or, if no arguments are
+supplied, any job, 
+to complete and returns its exit status.
+If none of the supplied arguments is a child of the shell, or if no arguments
+are supplied and the shell has no unwaited-for children, the exit status
+is 127.
+If the <samp>-p</samp> option is supplied, the process or job identifier of the job
+for which the exit status is returned is assigned to the variable
+<var>varname</var> named by the option argument.
+The variable will be unset initially, before any assignment.
+This is useful only when the <samp>-n</samp> option is supplied.
+Supplying the <samp>-f</samp> option, when job control is enabled,
+forces <code>wait</code> to wait for each <var>pid</var> or <var>jobspec</var> to
+terminate before returning its status, intead of returning when it changes
+status.
+If neither <var>jobspec</var> nor <var>pid</var> specifies an active child process
+of the shell, the return status is 127.
+</p>
+</dd>
+<dt><code>disown</code></dt>
+<dd><span id="index-disown"></span>
+<div class="example">
+<pre class="example">disown [-ar] [-h] [<var>jobspec</var> &hellip; | <var>pid</var> &hellip; ]
+</pre></div>
+
+<p>Without options, remove each <var>jobspec</var> from the table of
+active jobs.
+If the <samp>-h</samp> option is given, the job is not removed from the table,
+but is marked so that <code>SIGHUP</code> is not sent to the job if the shell
+receives a <code>SIGHUP</code>.
+If <var>jobspec</var> is not present, and neither the <samp>-a</samp> nor the
+<samp>-r</samp> option is supplied, the current job is used.
+If no <var>jobspec</var> is supplied, the <samp>-a</samp> option means to remove or
+mark all jobs; the <samp>-r</samp> option without a <var>jobspec</var>
+argument restricts operation to running jobs.
+</p>
+</dd>
+<dt><code>suspend</code></dt>
+<dd><span id="index-suspend"></span>
+<div class="example">
+<pre class="example">suspend [-f]
+</pre></div>
+
+<p>Suspend the execution of this shell until it receives a
+<code>SIGCONT</code> signal.
+A login shell cannot be suspended; the <samp>-f</samp>
+option can be used to override this and force the suspension.
+</p></dd>
+</dl>
+
+<p>When job control is not active, the <code>kill</code> and <code>wait</code>
+builtins do not accept <var>jobspec</var> arguments.  They must be
+supplied process <small>ID</small>s.
+</p>
+<hr>
+<span id="Job-Control-Variables"></span><div class="header">
+<p>
+Previous: <a href="#Job-Control-Builtins" accesskey="p" rel="prev">Job Control Builtins</a>, Up: <a href="#Job-Control" accesskey="u" rel="up">Job Control</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Job-Control-Variables-1"></span><h3 class="section">7.3 Job Control Variables</h3>
+
+<dl compact="compact">
+<dt><code>auto_resume</code>
+<span id="index-auto_005fresume"></span>
+</dt>
+<dd><p>This variable controls how the shell interacts with the user and
+job control.  If this variable exists then single word simple
+commands without redirections are treated as candidates for resumption
+of an existing job.  There is no ambiguity allowed; if there is
+more than one job beginning with the string typed, then
+the most recently accessed job will be selected.
+The name of a stopped job, in this context, is the command line
+used to start it.  If this variable is set to the value &lsquo;<samp>exact</samp>&rsquo;,
+the string supplied must match the name of a stopped job exactly;
+if set to &lsquo;<samp>substring</samp>&rsquo;,
+the string supplied needs to match a substring of the name of a
+stopped job.  The &lsquo;<samp>substring</samp>&rsquo; value provides functionality
+analogous to the &lsquo;<samp>%?</samp>&rsquo; job <small>ID</small> (see <a href="#Job-Control-Basics">Job Control Basics</a>).
+If set to any other value, the supplied string must
+be a prefix of a stopped job&rsquo;s name; this provides functionality
+analogous to the &lsquo;<samp>%</samp>&rsquo; job <small>ID</small>.
+</p>
+</dd>
+</dl>
+
+<span id="index-Readline_002c-how-to-use"></span>
+
+
+
+
+<hr>
+<span id="Command-Line-Editing"></span><div class="header">
+<p>
+Next: <a href="#Using-History-Interactively" accesskey="n" rel="next">Using History Interactively</a>, Previous: <a href="#Job-Control" accesskey="p" rel="prev">Job Control</a>, Up: <a href="#Top" accesskey="u" rel="up">Top</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Command-Line-Editing-1"></span><h2 class="chapter">8 Command Line Editing</h2>
+
+<p>This chapter describes the basic features of the <small>GNU</small>
+command line editing interface.
+Command line editing is provided by the Readline library, which is
+used by several different programs, including Bash.
+Command line editing is enabled by default when using an interactive shell,
+unless the <samp>--noediting</samp> option is supplied at shell invocation.
+Line editing is also used when using the <samp>-e</samp> option to the
+<code>read</code> builtin command (see <a href="#Bash-Builtins">Bash Builtins</a>).
+By default, the line editing commands are similar to those of Emacs.
+A vi-style line editing interface is also available.
+Line editing can be enabled at any time using the <samp>-o emacs</samp> or
+<samp>-o vi</samp> options to the <code>set</code> builtin command
+(see <a href="#The-Set-Builtin">The Set Builtin</a>), or disabled using the <samp>+o emacs</samp> or 
+<samp>+o vi</samp> options to <code>set</code>.
+</p>
+<table class="menu" border="0" cellspacing="0">
+<tr><td align="left" valign="top">&bull; <a href="#Introduction-and-Notation" accesskey="1">Introduction and Notation</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Notation used in this text.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Readline-Interaction" accesskey="2">Readline Interaction</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">The minimum set of commands for editing a line.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Readline-Init-File" accesskey="3">Readline Init File</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Customizing Readline from a user&rsquo;s view.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Bindable-Readline-Commands" accesskey="4">Bindable Readline Commands</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">A description of most of the Readline commands
+				available for binding
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Readline-vi-Mode" accesskey="5">Readline vi Mode</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">A short description of how to make Readline
+				behave like the vi editor.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Programmable-Completion" accesskey="6">Programmable Completion</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How to specify the possible completions for
+				a specific command.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Programmable-Completion-Builtins" accesskey="7">Programmable Completion Builtins</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Builtin commands to specify how to
+				complete arguments for a particular command.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#A-Programmable-Completion-Example" accesskey="8">A Programmable Completion Example</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">An example shell function for
+				generating possible completions.
+</td></tr>
+</table>
+
+<hr>
+<span id="Introduction-and-Notation"></span><div class="header">
+<p>
+Next: <a href="#Readline-Interaction" accesskey="n" rel="next">Readline Interaction</a>, Up: <a href="#Command-Line-Editing" accesskey="u" rel="up">Command Line Editing</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Introduction-to-Line-Editing"></span><h3 class="section">8.1 Introduction to Line Editing</h3>
+
+<p>The following paragraphs describe the notation used to represent
+keystrokes.
+</p>
+<p>The text <kbd>C-k</kbd> is read as &lsquo;Control-K&rsquo; and describes the character
+produced when the <tt class="key">k</tt> key is pressed while the Control key
+is depressed.
+</p>
+<p>The text <kbd>M-k</kbd> is read as &lsquo;Meta-K&rsquo; and describes the character
+produced when the Meta key (if you have one) is depressed, and the <tt class="key">k</tt>
+key is pressed.
+The Meta key is labeled <tt class="key">ALT</tt> on many keyboards.
+On keyboards with two keys labeled <tt class="key">ALT</tt> (usually to either side of
+the space bar), the <tt class="key">ALT</tt> on the left side is generally set to
+work as a Meta key.
+The <tt class="key">ALT</tt> key on the right may also be configured to work as a
+Meta key or may be configured as some other modifier, such as a
+Compose key for typing accented characters.
+</p>
+<p>If you do not have a Meta or <tt class="key">ALT</tt> key, or another key working as
+a Meta key, the identical keystroke can be generated by typing <tt class="key">ESC</tt>
+<em>first</em>, and then typing <tt class="key">k</tt>.
+Either process is known as <em>metafying</em> the <tt class="key">k</tt> key.
+</p>
+<p>The text <kbd>M-C-k</kbd> is read as &lsquo;Meta-Control-k&rsquo; and describes the
+character produced by <em>metafying</em> <kbd>C-k</kbd>.
+</p>
+<p>In addition, several keys have their own names.  Specifically,
+<tt class="key">DEL</tt>, <tt class="key">ESC</tt>, <tt class="key">LFD</tt>, <tt class="key">SPC</tt>, <tt class="key">RET</tt>, and <tt class="key">TAB</tt> all
+stand for themselves when seen in this text, or in an init file
+(see <a href="#Readline-Init-File">Readline Init File</a>).
+If your keyboard lacks a <tt class="key">LFD</tt> key, typing <tt class="key">C-j</tt> will
+produce the desired character.
+The <tt class="key">RET</tt> key may be labeled <tt class="key">Return</tt> or <tt class="key">Enter</tt> on
+some keyboards.
+</p>
+<hr>
+<span id="Readline-Interaction"></span><div class="header">
+<p>
+Next: <a href="#Readline-Init-File" accesskey="n" rel="next">Readline Init File</a>, Previous: <a href="#Introduction-and-Notation" accesskey="p" rel="prev">Introduction and Notation</a>, Up: <a href="#Command-Line-Editing" accesskey="u" rel="up">Command Line Editing</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Readline-Interaction-1"></span><h3 class="section">8.2 Readline Interaction</h3>
+<span id="index-interaction_002c-readline"></span>
+
+<p>Often during an interactive session you type in a long line of text,
+only to notice that the first word on the line is misspelled.  The
+Readline library gives you a set of commands for manipulating the text
+as you type it in, allowing you to just fix your typo, and not forcing
+you to retype the majority of the line.  Using these editing commands,
+you move the cursor to the place that needs correction, and delete or
+insert the text of the corrections.  Then, when you are satisfied with
+the line, you simply press <tt class="key">RET</tt>.  You do not have to be at the
+end of the line to press <tt class="key">RET</tt>; the entire line is accepted
+regardless of the location of the cursor within the line.
+</p>
+<table class="menu" border="0" cellspacing="0">
+<tr><td align="left" valign="top">&bull; <a href="#Readline-Bare-Essentials" accesskey="1">Readline Bare Essentials</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">The least you need to know about Readline.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Readline-Movement-Commands" accesskey="2">Readline Movement Commands</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Moving about the input line.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Readline-Killing-Commands" accesskey="3">Readline Killing Commands</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How to delete text, and how to get it back!
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Readline-Arguments" accesskey="4">Readline Arguments</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Giving numeric arguments to commands.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Searching" accesskey="5">Searching</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Searching through previous lines.
+</td></tr>
+</table>
+
+<hr>
+<span id="Readline-Bare-Essentials"></span><div class="header">
+<p>
+Next: <a href="#Readline-Movement-Commands" accesskey="n" rel="next">Readline Movement Commands</a>, Up: <a href="#Readline-Interaction" accesskey="u" rel="up">Readline Interaction</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Readline-Bare-Essentials-1"></span><h4 class="subsection">8.2.1 Readline Bare Essentials</h4>
+<span id="index-notation_002c-readline"></span>
+<span id="index-command-editing"></span>
+<span id="index-editing-command-lines"></span>
+
+<p>In order to enter characters into the line, simply type them.  The typed
+character appears where the cursor was, and then the cursor moves one
+space to the right.  If you mistype a character, you can use your
+erase character to back up and delete the mistyped character.
+</p>
+<p>Sometimes you may mistype a character, and
+not notice the error until you have typed several other characters.  In
+that case, you can type <kbd>C-b</kbd> to move the cursor to the left, and then
+correct your mistake.  Afterwards, you can move the cursor to the right
+with <kbd>C-f</kbd>.
+</p>
+<p>When you add text in the middle of a line, you will notice that characters
+to the right of the cursor are &lsquo;pushed over&rsquo; to make room for the text
+that you have inserted.  Likewise, when you delete text behind the cursor,
+characters to the right of the cursor are &lsquo;pulled back&rsquo; to fill in the
+blank space created by the removal of the text.  A list of the bare
+essentials for editing the text of an input line follows.
+</p>
+<dl compact="compact">
+<dt><kbd>C-b</kbd></dt>
+<dd><p>Move back one character.
+</p></dd>
+<dt><kbd>C-f</kbd></dt>
+<dd><p>Move forward one character.
+</p></dd>
+<dt><tt class="key">DEL</tt> or <tt class="key">Backspace</tt></dt>
+<dd><p>Delete the character to the left of the cursor.
+</p></dd>
+<dt><kbd>C-d</kbd></dt>
+<dd><p>Delete the character underneath the cursor.
+</p></dd>
+<dt>Printing&nbsp;characters<!-- /@w --></dt>
+<dd><p>Insert the character into the line at the cursor.
+</p></dd>
+<dt><kbd>C-_</kbd> or <kbd>C-x C-u</kbd></dt>
+<dd><p>Undo the last editing command.  You can undo all the way back to an
+empty line.
+</p></dd>
+</dl>
+
+<p>(Depending on your configuration, the <tt class="key">Backspace</tt> key be set to
+delete the character to the left of the cursor and the <tt class="key">DEL</tt> key set
+to delete the character underneath the cursor, like <kbd>C-d</kbd>, rather
+than the character to the left of the cursor.)
+</p>
+<hr>
+<span id="Readline-Movement-Commands"></span><div class="header">
+<p>
+Next: <a href="#Readline-Killing-Commands" accesskey="n" rel="next">Readline Killing Commands</a>, Previous: <a href="#Readline-Bare-Essentials" accesskey="p" rel="prev">Readline Bare Essentials</a>, Up: <a href="#Readline-Interaction" accesskey="u" rel="up">Readline Interaction</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Readline-Movement-Commands-1"></span><h4 class="subsection">8.2.2 Readline Movement Commands</h4>
+
+
+<p>The above table describes the most basic keystrokes that you need
+in order to do editing of the input line.  For your convenience, many
+other commands have been added in addition to <kbd>C-b</kbd>, <kbd>C-f</kbd>,
+<kbd>C-d</kbd>, and <tt class="key">DEL</tt>.  Here are some commands for moving more rapidly
+about the line.
+</p>
+<dl compact="compact">
+<dt><kbd>C-a</kbd></dt>
+<dd><p>Move to the start of the line.
+</p></dd>
+<dt><kbd>C-e</kbd></dt>
+<dd><p>Move to the end of the line.
+</p></dd>
+<dt><kbd>M-f</kbd></dt>
+<dd><p>Move forward a word, where a word is composed of letters and digits.
+</p></dd>
+<dt><kbd>M-b</kbd></dt>
+<dd><p>Move backward a word.
+</p></dd>
+<dt><kbd>C-l</kbd></dt>
+<dd><p>Clear the screen, reprinting the current line at the top.
+</p></dd>
+</dl>
+
+<p>Notice how <kbd>C-f</kbd> moves forward a character, while <kbd>M-f</kbd> moves
+forward a word.  It is a loose convention that control keystrokes
+operate on characters while meta keystrokes operate on words.
+</p>
+<hr>
+<span id="Readline-Killing-Commands"></span><div class="header">
+<p>
+Next: <a href="#Readline-Arguments" accesskey="n" rel="next">Readline Arguments</a>, Previous: <a href="#Readline-Movement-Commands" accesskey="p" rel="prev">Readline Movement Commands</a>, Up: <a href="#Readline-Interaction" accesskey="u" rel="up">Readline Interaction</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Readline-Killing-Commands-1"></span><h4 class="subsection">8.2.3 Readline Killing Commands</h4>
+
+<span id="index-killing-text"></span>
+<span id="index-yanking-text"></span>
+
+<p><em>Killing</em> text means to delete the text from the line, but to save
+it away for later use, usually by <em>yanking</em> (re-inserting)
+it back into the line.
+(&lsquo;Cut&rsquo; and &lsquo;paste&rsquo; are more recent jargon for &lsquo;kill&rsquo; and &lsquo;yank&rsquo;.)
+</p>
+<p>If the description for a command says that it &lsquo;kills&rsquo; text, then you can
+be sure that you can get the text back in a different (or the same)
+place later.
+</p>
+<p>When you use a kill command, the text is saved in a <em>kill-ring</em>.
+Any number of consecutive kills save all of the killed text together, so
+that when you yank it back, you get it all.  The kill
+ring is not line specific; the text that you killed on a previously
+typed line is available to be yanked back later, when you are typing
+another line.
+<span id="index-kill-ring"></span>
+</p>
+<p>Here is the list of commands for killing text.
+</p>
+<dl compact="compact">
+<dt><kbd>C-k</kbd></dt>
+<dd><p>Kill the text from the current cursor position to the end of the line.
+</p>
+</dd>
+<dt><kbd>M-d</kbd></dt>
+<dd><p>Kill from the cursor to the end of the current word, or, if between
+words, to the end of the next word.
+Word boundaries are the same as those used by <kbd>M-f</kbd>.
+</p>
+</dd>
+<dt><kbd>M-<span class="key">DEL</span></kbd></dt>
+<dd><p>Kill from the cursor the start of the current word, or, if between
+words, to the start of the previous word.
+Word boundaries are the same as those used by <kbd>M-b</kbd>.
+</p>
+</dd>
+<dt><kbd>C-w</kbd></dt>
+<dd><p>Kill from the cursor to the previous whitespace.  This is different than
+<kbd>M-<span class="key">DEL</span></kbd> because the word boundaries differ.
+</p>
+</dd>
+</dl>
+
+<p>Here is how to <em>yank</em> the text back into the line.  Yanking
+means to copy the most-recently-killed text from the kill buffer.
+</p>
+<dl compact="compact">
+<dt><kbd>C-y</kbd></dt>
+<dd><p>Yank the most recently killed text back into the buffer at the cursor.
+</p>
+</dd>
+<dt><kbd>M-y</kbd></dt>
+<dd><p>Rotate the kill-ring, and yank the new top.  You can only do this if
+the prior command is <kbd>C-y</kbd> or <kbd>M-y</kbd>.
+</p></dd>
+</dl>
+
+<hr>
+<span id="Readline-Arguments"></span><div class="header">
+<p>
+Next: <a href="#Searching" accesskey="n" rel="next">Searching</a>, Previous: <a href="#Readline-Killing-Commands" accesskey="p" rel="prev">Readline Killing Commands</a>, Up: <a href="#Readline-Interaction" accesskey="u" rel="up">Readline Interaction</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Readline-Arguments-1"></span><h4 class="subsection">8.2.4 Readline Arguments</h4>
+
+<p>You can pass numeric arguments to Readline commands.  Sometimes the
+argument acts as a repeat count, other times it is the <i>sign</i> of the
+argument that is significant.  If you pass a negative argument to a
+command which normally acts in a forward direction, that command will
+act in a backward direction.  For example, to kill text back to the
+start of the line, you might type &lsquo;<samp>M-- C-k</samp>&rsquo;.
+</p>
+<p>The general way to pass numeric arguments to a command is to type meta
+digits before the command.  If the first &lsquo;digit&rsquo; typed is a minus
+sign (&lsquo;<samp>-</samp>&rsquo;), then the sign of the argument will be negative.  Once
+you have typed one meta digit to get the argument started, you can type
+the remainder of the digits, and then the command.  For example, to give
+the <kbd>C-d</kbd> command an argument of 10, you could type &lsquo;<samp>M-1 0 C-d</samp>&rsquo;,
+which will delete the next ten characters on the input line.
+</p>
+<hr>
+<span id="Searching"></span><div class="header">
+<p>
+Previous: <a href="#Readline-Arguments" accesskey="p" rel="prev">Readline Arguments</a>, Up: <a href="#Readline-Interaction" accesskey="u" rel="up">Readline Interaction</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Searching-for-Commands-in-the-History"></span><h4 class="subsection">8.2.5 Searching for Commands in the History</h4>
+
+<p>Readline provides commands for searching through the command history
+(see <a href="#Bash-History-Facilities">Bash History Facilities</a>)
+for lines containing a specified string.
+There are two search modes:  <em>incremental</em> and <em>non-incremental</em>.
+</p>
+<p>Incremental searches begin before the user has finished typing the
+search string.
+As each character of the search string is typed, Readline displays
+the next entry from the history matching the string typed so far.
+An incremental search requires only as many characters as needed to
+find the desired history entry.
+To search backward in the history for a particular string, type
+<kbd>C-r</kbd>.  Typing <kbd>C-s</kbd> searches forward through the history.
+The characters present in the value of the <code>isearch-terminators</code> variable
+are used to terminate an incremental search.
+If that variable has not been assigned a value, the <tt class="key">ESC</tt> and
+<kbd>C-J</kbd> characters will terminate an incremental search.
+<kbd>C-g</kbd> will abort an incremental search and restore the original line.
+When the search is terminated, the history entry containing the
+search string becomes the current line.
+</p>
+<p>To find other matching entries in the history list, type <kbd>C-r</kbd> or
+<kbd>C-s</kbd> as appropriate.
+This will search backward or forward in the history for the next
+entry matching the search string typed so far.
+Any other key sequence bound to a Readline command will terminate
+the search and execute that command.
+For instance, a <tt class="key">RET</tt> will terminate the search and accept
+the line, thereby executing the command from the history list.
+A movement command will terminate the search, make the last line found
+the current line, and begin editing.
+</p>
+<p>Readline remembers the last incremental search string.  If two
+<kbd>C-r</kbd>s are typed without any intervening characters defining a new
+search string, any remembered search string is used.
+</p>
+<p>Non-incremental searches read the entire search string before starting
+to search for matching history lines.  The search string may be
+typed by the user or be part of the contents of the current line.
+</p>
+<hr>
+<span id="Readline-Init-File"></span><div class="header">
+<p>
+Next: <a href="#Bindable-Readline-Commands" accesskey="n" rel="next">Bindable Readline Commands</a>, Previous: <a href="#Readline-Interaction" accesskey="p" rel="prev">Readline Interaction</a>, Up: <a href="#Command-Line-Editing" accesskey="u" rel="up">Command Line Editing</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Readline-Init-File-1"></span><h3 class="section">8.3 Readline Init File</h3>
+<span id="index-initialization-file_002c-readline"></span>
+
+<p>Although the Readline library comes with a set of Emacs-like
+keybindings installed by default, it is possible to use a different set
+of keybindings.
+Any user can customize programs that use Readline by putting
+commands in an <em>inputrc</em> file, conventionally in his home directory.
+The name of this
+file is taken from the value of the shell variable <code>INPUTRC</code>.  If
+that variable is unset, the default is <samp>~/.inputrc</samp>.  If that
+file does not exist or cannot be read, the ultimate default is
+<samp>/etc/inputrc</samp>.
+The <code>bind</code><!-- /@w --> builtin command can also be used to set Readline
+keybindings and variables.
+See <a href="#Bash-Builtins">Bash Builtins</a>.
+</p>
+<p>When a program which uses the Readline library starts up, the
+init file is read, and the key bindings are set.
+</p>
+<p>In addition, the <code>C-x C-r</code> command re-reads this init file, thus
+incorporating any changes that you might have made to it.
+</p>
+<table class="menu" border="0" cellspacing="0">
+<tr><td align="left" valign="top">&bull; <a href="#Readline-Init-File-Syntax" accesskey="1">Readline Init File Syntax</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Syntax for the commands in the inputrc file.
+</td></tr>
+<tr><th colspan="3" align="left" valign="top"><pre class="menu-comment">
+
+</pre></th></tr><tr><td align="left" valign="top">&bull; <a href="#Conditional-Init-Constructs" accesskey="2">Conditional Init Constructs</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Conditional key bindings in the inputrc file.
+</td></tr>
+<tr><th colspan="3" align="left" valign="top"><pre class="menu-comment">
+
+</pre></th></tr><tr><td align="left" valign="top">&bull; <a href="#Sample-Init-File" accesskey="3">Sample Init File</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">An example inputrc file.
+</td></tr>
+</table>
+
+<hr>
+<span id="Readline-Init-File-Syntax"></span><div class="header">
+<p>
+Next: <a href="#Conditional-Init-Constructs" accesskey="n" rel="next">Conditional Init Constructs</a>, Up: <a href="#Readline-Init-File" accesskey="u" rel="up">Readline Init File</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Readline-Init-File-Syntax-1"></span><h4 class="subsection">8.3.1 Readline Init File Syntax</h4>
+
+<p>There are only a few basic constructs allowed in the
+Readline init file.  Blank lines are ignored.
+Lines beginning with a &lsquo;<samp>#</samp>&rsquo; are comments.
+Lines beginning with a &lsquo;<samp>$</samp>&rsquo; indicate conditional
+constructs (see <a href="#Conditional-Init-Constructs">Conditional Init Constructs</a>).  Other lines
+denote variable settings and key bindings.
+</p>
+<dl compact="compact">
+<dt>Variable Settings</dt>
+<dd><p>You can modify the run-time behavior of Readline by
+altering the values of variables in Readline
+using the <code>set</code> command within the init file.
+The syntax is simple:
+</p>
+<div class="example">
+<pre class="example">set <var>variable</var> <var>value</var>
+</pre></div>
+
+<p>Here, for example, is how to
+change from the default Emacs-like key binding to use
+<code>vi</code> line editing commands:
+</p>
+<div class="example">
+<pre class="example">set editing-mode vi
+</pre></div>
+
+<p>Variable names and values, where appropriate, are recognized without regard
+to case.  Unrecognized variable names are ignored.
+</p>
+<p>Boolean variables (those that can be set to on or off) are set to on if
+the value is null or empty, <var>on</var> (case-insensitive), or 1.  Any other
+value results in the variable being set to off.
+</p>
+<p>The <code>bind&nbsp;<span class="nolinebreak">-V</span></code><!-- /@w --> command lists the current Readline variable names
+and values.  See <a href="#Bash-Builtins">Bash Builtins</a>.
+</p>
+<p>A great deal of run-time behavior is changeable with the following
+variables.
+</p>
+<span id="index-variables_002c-readline"></span>
+<dl compact="compact">
+<dt><code>bell-style</code></dt>
+<dd><span id="index-bell_002dstyle"></span>
+<p>Controls what happens when Readline wants to ring the terminal bell.
+If set to &lsquo;<samp>none</samp>&rsquo;, Readline never rings the bell.  If set to
+&lsquo;<samp>visible</samp>&rsquo;, Readline uses a visible bell if one is available.
+If set to &lsquo;<samp>audible</samp>&rsquo; (the default), Readline attempts to ring
+the terminal&rsquo;s bell.
+</p>
+</dd>
+<dt><code>bind-tty-special-chars</code></dt>
+<dd><span id="index-bind_002dtty_002dspecial_002dchars"></span>
+<p>If set to &lsquo;<samp>on</samp>&rsquo; (the default), Readline attempts to bind the control
+characters   treated specially by the kernel&rsquo;s terminal driver to their
+Readline equivalents.
+</p>
+</dd>
+<dt><code>blink-matching-paren</code></dt>
+<dd><span id="index-blink_002dmatching_002dparen"></span>
+<p>If set to &lsquo;<samp>on</samp>&rsquo;, Readline attempts to briefly move the cursor to an
+opening parenthesis when a closing parenthesis is inserted.  The default
+is &lsquo;<samp>off</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>colored-completion-prefix</code></dt>
+<dd><span id="index-colored_002dcompletion_002dprefix"></span>
+<p>If set to &lsquo;<samp>on</samp>&rsquo;, when listing completions, Readline displays the
+common prefix of the set of possible completions using a different color.
+The color definitions are taken from the value of the <code>LS_COLORS</code>
+environment variable.
+The default is &lsquo;<samp>off</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>colored-stats</code></dt>
+<dd><span id="index-colored_002dstats"></span>
+<p>If set to &lsquo;<samp>on</samp>&rsquo;, Readline displays possible completions using different
+colors to indicate their file type.
+The color definitions are taken from the value of the <code>LS_COLORS</code>
+environment variable.
+The default is &lsquo;<samp>off</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>comment-begin</code></dt>
+<dd><span id="index-comment_002dbegin"></span>
+<p>The string to insert at the beginning of the line when the
+<code>insert-comment</code> command is executed.  The default value
+is <code>&quot;#&quot;</code>.
+</p>
+</dd>
+<dt><code>completion-display-width</code></dt>
+<dd><span id="index-completion_002ddisplay_002dwidth"></span>
+<p>The number of screen columns used to display possible matches
+when performing completion.
+The value is ignored if it is less than 0 or greater than the terminal
+screen width.
+A value of 0 will cause matches to be displayed one per line.
+The default value is -1.
+</p>
+</dd>
+<dt><code>completion-ignore-case</code></dt>
+<dd><span id="index-completion_002dignore_002dcase"></span>
+<p>If set to &lsquo;<samp>on</samp>&rsquo;, Readline performs filename matching and completion
+in a case-insensitive fashion.
+The default value is &lsquo;<samp>off</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>completion-map-case</code></dt>
+<dd><span id="index-completion_002dmap_002dcase"></span>
+<p>If set to &lsquo;<samp>on</samp>&rsquo;, and <var>completion-ignore-case</var> is enabled, Readline
+treats hyphens (&lsquo;<samp>-</samp>&rsquo;) and underscores (&lsquo;<samp>_</samp>&rsquo;) as equivalent when
+performing case-insensitive filename matching and completion.
+The default value is &lsquo;<samp>off</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>completion-prefix-display-length</code></dt>
+<dd><span id="index-completion_002dprefix_002ddisplay_002dlength"></span>
+<p>The length in characters of the common prefix of a list of possible
+completions that is displayed without modification.  When set to a
+value greater than zero, common prefixes longer than this value are
+replaced with an ellipsis when displaying possible completions.
+</p>
+</dd>
+<dt><code>completion-query-items</code></dt>
+<dd><span id="index-completion_002dquery_002ditems"></span>
+<p>The number of possible completions that determines when the user is
+asked whether the list of possibilities should be displayed.
+If the number of possible completions is greater than or equal to this value,
+Readline will ask whether or not the user wishes to view them;
+otherwise, they are simply listed.
+This variable must be set to an integer value greater than or equal to 0.
+A negative value means Readline should never ask.
+The default limit is <code>100</code>.
+</p>
+</dd>
+<dt><code>convert-meta</code></dt>
+<dd><span id="index-convert_002dmeta"></span>
+<p>If set to &lsquo;<samp>on</samp>&rsquo;, Readline will convert characters with the
+eighth bit set to an <small>ASCII</small> key sequence by stripping the eighth
+bit and prefixing an <tt class="key">ESC</tt> character, converting them to a
+meta-prefixed key sequence.  The default value is &lsquo;<samp>on</samp>&rsquo;, but
+will be set to &lsquo;<samp>off</samp>&rsquo; if the locale is one that contains
+eight-bit characters.
+</p>
+</dd>
+<dt><code>disable-completion</code></dt>
+<dd><span id="index-disable_002dcompletion"></span>
+<p>If set to &lsquo;<samp>On</samp>&rsquo;, Readline will inhibit word completion.
+Completion  characters will be inserted into the line as if they had
+been mapped to <code>self-insert</code>.  The default is &lsquo;<samp>off</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>echo-control-characters</code></dt>
+<dd><span id="index-echo_002dcontrol_002dcharacters"></span>
+<p>When set to &lsquo;<samp>on</samp>&rsquo;, on operating systems that indicate they support it,
+readline echoes a character corresponding to a signal generated from the
+keyboard.  The default is &lsquo;<samp>on</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>editing-mode</code></dt>
+<dd><span id="index-editing_002dmode"></span>
+<p>The <code>editing-mode</code> variable controls which default set of
+key bindings is used.  By default, Readline starts up in Emacs editing
+mode, where the keystrokes are most similar to Emacs.  This variable can be
+set to either &lsquo;<samp>emacs</samp>&rsquo; or &lsquo;<samp>vi</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>emacs-mode-string</code></dt>
+<dd><span id="index-emacs_002dmode_002dstring"></span>
+<p>If the <var>show-mode-in-prompt</var> variable is enabled,
+this string is displayed immediately before the last line of the primary
+prompt when emacs editing mode is active.  The value is expanded like a
+key binding, so the standard set of meta- and control prefixes and
+backslash escape sequences is available.
+Use the &lsquo;<samp>\1</samp>&rsquo; and &lsquo;<samp>\2</samp>&rsquo; escapes to begin and end sequences of
+non-printing characters, which can be used to embed a terminal control
+sequence into the mode string.
+The default is &lsquo;<samp>@</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>enable-bracketed-paste</code></dt>
+<dd><span id="index-enable_002dbracketed_002dpaste"></span>
+<p>When set to &lsquo;<samp>On</samp>&rsquo;, Readline will configure the terminal in a way
+that will enable it to insert each paste into the editing buffer as a
+single string of characters, instead of treating each character as if
+it had been read from the keyboard.  This can prevent pasted characters
+from being interpreted as editing commands.  The default is &lsquo;<samp>On</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>enable-keypad</code></dt>
+<dd><span id="index-enable_002dkeypad"></span>
+<p>When set to &lsquo;<samp>on</samp>&rsquo;, Readline will try to enable the application
+keypad when it is called.  Some systems need this to enable the
+arrow keys.  The default is &lsquo;<samp>off</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>enable-meta-key</code></dt>
+<dd><p>When set to &lsquo;<samp>on</samp>&rsquo;, Readline will try to enable any meta modifier
+key the terminal claims to support when it is called.  On many terminals,
+the meta key is used to send eight-bit characters.
+The default is &lsquo;<samp>on</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>expand-tilde</code></dt>
+<dd><span id="index-expand_002dtilde"></span>
+<p>If set to &lsquo;<samp>on</samp>&rsquo;, tilde expansion is performed when Readline
+attempts word completion.  The default is &lsquo;<samp>off</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>history-preserve-point</code></dt>
+<dd><span id="index-history_002dpreserve_002dpoint"></span>
+<p>If set to &lsquo;<samp>on</samp>&rsquo;, the history code attempts to place the point (the
+current cursor position) at the
+same location on each history line retrieved with <code>previous-history</code>
+or <code>next-history</code>.  The default is &lsquo;<samp>off</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>history-size</code></dt>
+<dd><span id="index-history_002dsize"></span>
+<p>Set the maximum number of history entries saved in the history list.
+If set to zero, any existing history entries are deleted and no new entries
+are saved.
+If set to a value less than zero, the number of history entries is not
+limited.
+By default, the number of history entries is not limited.
+If an attempt is made to set <var>history-size</var> to a non-numeric value,
+the maximum number of history entries will be set to 500.
+</p>
+</dd>
+<dt><code>horizontal-scroll-mode</code></dt>
+<dd><span id="index-horizontal_002dscroll_002dmode"></span>
+<p>This variable can be set to either &lsquo;<samp>on</samp>&rsquo; or &lsquo;<samp>off</samp>&rsquo;.  Setting it
+to &lsquo;<samp>on</samp>&rsquo; means that the text of the lines being edited will scroll
+horizontally on a single screen line when they are longer than the width
+of the screen, instead of wrapping onto a new screen line.
+This variable is automatically set to &lsquo;<samp>on</samp>&rsquo; for terminals of height 1.
+By default, this variable is set to &lsquo;<samp>off</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>input-meta</code></dt>
+<dd><span id="index-input_002dmeta"></span>
+<span id="index-meta_002dflag"></span>
+<p>If set to &lsquo;<samp>on</samp>&rsquo;, Readline will enable eight-bit input (it
+will not clear the eighth bit in the characters it reads),
+regardless of what the terminal claims it can support.  The
+default value is &lsquo;<samp>off</samp>&rsquo;, but Readline will set it to &lsquo;<samp>on</samp>&rsquo; if the 
+locale contains eight-bit characters.
+The name <code>meta-flag</code> is a synonym for this variable.
+</p>
+</dd>
+<dt><code>isearch-terminators</code></dt>
+<dd><span id="index-isearch_002dterminators"></span>
+<p>The string of characters that should terminate an incremental search without
+subsequently executing the character as a command (see <a href="#Searching">Searching</a>).
+If this variable has not been given a value, the characters <tt class="key">ESC</tt> and
+<kbd>C-J</kbd> will terminate an incremental search.
+</p>
+</dd>
+<dt><code>keymap</code></dt>
+<dd><span id="index-keymap"></span>
+<p>Sets Readline&rsquo;s idea of the current keymap for key binding commands.
+Built-in <code>keymap</code> names are
+<code>emacs</code>,
+<code>emacs-standard</code>,
+<code>emacs-meta</code>,
+<code>emacs-ctlx</code>,
+<code>vi</code>,
+<code>vi-move</code>,
+<code>vi-command</code>, and
+<code>vi-insert</code>.
+<code>vi</code> is equivalent to <code>vi-command</code> (<code>vi-move</code> is also a
+synonym); <code>emacs</code> is equivalent to <code>emacs-standard</code>.
+Applications may add additional names.
+The default value is <code>emacs</code>.
+The value of the <code>editing-mode</code> variable also affects the
+default keymap.
+</p>
+</dd>
+<dt><code>keyseq-timeout</code></dt>
+<dd><p>Specifies the duration Readline will wait for a character when reading an
+ambiguous key sequence (one that can form a complete key sequence using
+the input read so far, or can take additional input to complete a longer
+key sequence).
+If no input is received within the timeout, Readline will use the shorter
+but complete key sequence.
+Readline uses this value to determine whether or not input is
+available on the current input source (<code>rl_instream</code> by default).
+The value is specified in milliseconds, so a value of 1000 means that
+Readline will wait one second for additional input.
+If this variable is set to a value less than or equal to zero, or to a
+non-numeric value, Readline will wait until another key is pressed to
+decide which key sequence to complete.
+The default value is <code>500</code>.
+</p>
+</dd>
+<dt><code>mark-directories</code></dt>
+<dd><p>If set to &lsquo;<samp>on</samp>&rsquo;, completed directory names have a slash
+appended.  The default is &lsquo;<samp>on</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>mark-modified-lines</code></dt>
+<dd><span id="index-mark_002dmodified_002dlines"></span>
+<p>This variable, when set to &lsquo;<samp>on</samp>&rsquo;, causes Readline to display an
+asterisk (&lsquo;<samp>*</samp>&rsquo;) at the start of history lines which have been modified.
+This variable is &lsquo;<samp>off</samp>&rsquo; by default.
+</p>
+</dd>
+<dt><code>mark-symlinked-directories</code></dt>
+<dd><span id="index-mark_002dsymlinked_002ddirectories"></span>
+<p>If set to &lsquo;<samp>on</samp>&rsquo;, completed names which are symbolic links
+to directories have a slash appended (subject to the value of
+<code>mark-directories</code>).
+The default is &lsquo;<samp>off</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>match-hidden-files</code></dt>
+<dd><span id="index-match_002dhidden_002dfiles"></span>
+<p>This variable, when set to &lsquo;<samp>on</samp>&rsquo;, causes Readline to match files whose
+names begin with a &lsquo;<samp>.</samp>&rsquo; (hidden files) when performing filename
+completion.
+If set to &lsquo;<samp>off</samp>&rsquo;, the leading &lsquo;<samp>.</samp>&rsquo; must be
+supplied by the user in the filename to be completed.
+This variable is &lsquo;<samp>on</samp>&rsquo; by default.
+</p>
+</dd>
+<dt><code>menu-complete-display-prefix</code></dt>
+<dd><span id="index-menu_002dcomplete_002ddisplay_002dprefix"></span>
+<p>If set to &lsquo;<samp>on</samp>&rsquo;, menu completion displays the common prefix of the
+list of possible completions (which may be empty) before cycling through
+the list.  The default is &lsquo;<samp>off</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>output-meta</code></dt>
+<dd><span id="index-output_002dmeta"></span>
+<p>If set to &lsquo;<samp>on</samp>&rsquo;, Readline will display characters with the
+eighth bit set directly rather than as a meta-prefixed escape
+sequence.
+The default is &lsquo;<samp>off</samp>&rsquo;, but Readline will set it to &lsquo;<samp>on</samp>&rsquo; if the
+locale contains eight-bit characters.
+</p>
+</dd>
+<dt><code>page-completions</code></dt>
+<dd><span id="index-page_002dcompletions"></span>
+<p>If set to &lsquo;<samp>on</samp>&rsquo;, Readline uses an internal <code>more</code>-like pager
+to display a screenful of possible completions at a time.
+This variable is &lsquo;<samp>on</samp>&rsquo; by default.
+</p>
+</dd>
+<dt><code>print-completions-horizontally</code></dt>
+<dd><p>If set to &lsquo;<samp>on</samp>&rsquo;, Readline will display completions with matches
+sorted horizontally in alphabetical order, rather than down the screen.
+The default is &lsquo;<samp>off</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>revert-all-at-newline</code></dt>
+<dd><span id="index-revert_002dall_002dat_002dnewline"></span>
+<p>If set to &lsquo;<samp>on</samp>&rsquo;, Readline will undo all changes to history lines
+before returning when <code>accept-line</code> is executed.  By default,
+history lines may be modified and retain individual undo lists across
+calls to <code>readline</code>.  The default is &lsquo;<samp>off</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>show-all-if-ambiguous</code></dt>
+<dd><span id="index-show_002dall_002dif_002dambiguous"></span>
+<p>This alters the default behavior of the completion functions.  If
+set to &lsquo;<samp>on</samp>&rsquo;, 
+words which have more than one possible completion cause the
+matches to be listed immediately instead of ringing the bell.
+The default value is &lsquo;<samp>off</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>show-all-if-unmodified</code></dt>
+<dd><span id="index-show_002dall_002dif_002dunmodified"></span>
+<p>This alters the default behavior of the completion functions in
+a fashion similar to <var>show-all-if-ambiguous</var>.
+If set to &lsquo;<samp>on</samp>&rsquo;, 
+words which have more than one possible completion without any
+possible partial completion (the possible completions don&rsquo;t share
+a common prefix) cause the matches to be listed immediately instead
+of ringing the bell.
+The default value is &lsquo;<samp>off</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>show-mode-in-prompt</code></dt>
+<dd><span id="index-show_002dmode_002din_002dprompt"></span>
+<p>If set to &lsquo;<samp>on</samp>&rsquo;, add a string to the beginning of the prompt
+indicating the editing mode: emacs, vi command, or vi insertion.
+The mode strings are user-settable (e.g., <var>emacs-mode-string</var>).
+The default value is &lsquo;<samp>off</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>skip-completed-text</code></dt>
+<dd><span id="index-skip_002dcompleted_002dtext"></span>
+<p>If set to &lsquo;<samp>on</samp>&rsquo;, this alters the default completion behavior when
+inserting a single match into the line.  It&rsquo;s only active when
+performing completion in the middle of a word.  If enabled, readline
+does not insert characters from the completion that match characters
+after point in the word being completed, so portions of the word
+following the cursor are not duplicated.
+For instance, if this is enabled, attempting completion when the cursor
+is after the &lsquo;<samp>e</samp>&rsquo; in &lsquo;<samp>Makefile</samp>&rsquo; will result in &lsquo;<samp>Makefile</samp>&rsquo;
+rather than &lsquo;<samp>Makefilefile</samp>&rsquo;, assuming there is a single possible
+completion.
+The default value is &lsquo;<samp>off</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>vi-cmd-mode-string</code></dt>
+<dd><span id="index-vi_002dcmd_002dmode_002dstring"></span>
+<p>If the <var>show-mode-in-prompt</var> variable is enabled,
+this string is displayed immediately before the last line of the primary
+prompt when vi editing mode is active and in command mode.
+The value is expanded like a
+key binding, so the standard set of meta- and control prefixes and
+backslash escape sequences is available.
+Use the &lsquo;<samp>\1</samp>&rsquo; and &lsquo;<samp>\2</samp>&rsquo; escapes to begin and end sequences of
+non-printing characters, which can be used to embed a terminal control
+sequence into the mode string.
+The default is &lsquo;<samp>(cmd)</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>vi-ins-mode-string</code></dt>
+<dd><span id="index-vi_002dins_002dmode_002dstring"></span>
+<p>If the <var>show-mode-in-prompt</var> variable is enabled,
+this string is displayed immediately before the last line of the primary
+prompt when vi editing mode is active and in insertion mode.
+The value is expanded like a
+key binding, so the standard set of meta- and control prefixes and
+backslash escape sequences is available.
+Use the &lsquo;<samp>\1</samp>&rsquo; and &lsquo;<samp>\2</samp>&rsquo; escapes to begin and end sequences of
+non-printing characters, which can be used to embed a terminal control
+sequence into the mode string.
+The default is &lsquo;<samp>(ins)</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>visible-stats</code></dt>
+<dd><span id="index-visible_002dstats"></span>
+<p>If set to &lsquo;<samp>on</samp>&rsquo;, a character denoting a file&rsquo;s type
+is appended to the filename when listing possible
+completions.  The default is &lsquo;<samp>off</samp>&rsquo;.
+</p>
+</dd>
+</dl>
+
+</dd>
+<dt>Key Bindings</dt>
+<dd><p>The syntax for controlling key bindings in the init file is
+simple.  First you need to find the name of the command that you
+want to change.  The following sections contain tables of the command
+name, the default keybinding, if any, and a short description of what
+the command does.
+</p>
+<p>Once you know the name of the command, simply place on a line
+in the init file the name of the key
+you wish to bind the command to, a colon, and then the name of the
+command.
+There can be no space between the key name and the colon &ndash; that will be
+interpreted as part of the key name.
+The name of the key can be expressed in different ways, depending on
+what you find most comfortable.
+</p>
+<p>In addition to command names, readline allows keys to be bound
+to a string that is inserted when the key is pressed (a <var>macro</var>).
+</p>
+<p>The <code>bind&nbsp;<span class="nolinebreak">-p</span></code><!-- /@w --> command displays Readline function names and
+bindings in a format that can put directly into an initialization file.
+See <a href="#Bash-Builtins">Bash Builtins</a>.
+</p>
+<dl compact="compact">
+<dt><var>keyname</var>:&nbsp;<var><span class="nolinebreak">function-name</span></var>&nbsp;or&nbsp;<var>macro</var><!-- /@w --></dt>
+<dd><p><var>keyname</var> is the name of a key spelled out in English.  For example:
+</p><div class="example">
+<pre class="example">Control-u: universal-argument
+Meta-Rubout: backward-kill-word
+Control-o: &quot;&gt; output&quot;
+</pre></div>
+
+<p>In the example above, <kbd>C-u</kbd> is bound to the function
+<code>universal-argument</code>,
+<kbd>M-DEL</kbd> is bound to the function <code>backward-kill-word</code>, and
+<kbd>C-o</kbd> is bound to run the macro
+expressed on the right hand side (that is, to insert the text
+&lsquo;<samp>&gt; output</samp>&rsquo; into the line).
+</p>
+<p>A number of symbolic character names are recognized while
+processing this key binding syntax:
+<var>DEL</var>,
+<var>ESC</var>,
+<var>ESCAPE</var>,
+<var>LFD</var>,
+<var>NEWLINE</var>,
+<var>RET</var>,
+<var>RETURN</var>,
+<var>RUBOUT</var>,
+<var>SPACE</var>,
+<var>SPC</var>,
+and
+<var>TAB</var>.
+</p>
+</dd>
+<dt>&quot;<var>keyseq</var>&quot;:&nbsp;<var><span class="nolinebreak">function-name</span></var>&nbsp;or&nbsp;<var>macro</var><!-- /@w --></dt>
+<dd><p><var>keyseq</var> differs from <var>keyname</var> above in that strings
+denoting an entire key sequence can be specified, by placing
+the key sequence in double quotes.  Some <small>GNU</small> Emacs style key
+escapes can be used, as in the following example, but the
+special character names are not recognized.
+</p>
+<div class="example">
+<pre class="example">&quot;\C-u&quot;: universal-argument
+&quot;\C-x\C-r&quot;: re-read-init-file
+&quot;\e[11~&quot;: &quot;Function Key 1&quot;
+</pre></div>
+
+<p>In the above example, <kbd>C-u</kbd> is again bound to the function
+<code>universal-argument</code> (just as it was in the first example),
+&lsquo;<samp><kbd>C-x</kbd> <kbd>C-r</kbd></samp>&rsquo; is bound to the function <code>re-read-init-file</code>,
+and &lsquo;<samp><span class="key">ESC</span> <span class="key">[</span> <span class="key">1</span> <span class="key">1</span> <span class="key">~</span></samp>&rsquo; is bound to insert
+the text &lsquo;<samp>Function Key 1</samp>&rsquo;.
+</p>
+</dd>
+</dl>
+
+<p>The following <small>GNU</small> Emacs style escape sequences are available when
+specifying key sequences:
+</p>
+<dl compact="compact">
+<dt><code><kbd>\C-</kbd></code></dt>
+<dd><p>control prefix
+</p></dd>
+<dt><code><kbd>\M-</kbd></code></dt>
+<dd><p>meta prefix
+</p></dd>
+<dt><code><kbd>\e</kbd></code></dt>
+<dd><p>an escape character
+</p></dd>
+<dt><code><kbd>\\</kbd></code></dt>
+<dd><p>backslash
+</p></dd>
+<dt><code><kbd>\&quot;</kbd></code></dt>
+<dd><p><tt class="key">&quot;</tt>, a double quotation mark
+</p></dd>
+<dt><code><kbd>\'</kbd></code></dt>
+<dd><p><tt class="key">'</tt>, a single quote or apostrophe
+</p></dd>
+</dl>
+
+<p>In addition to the <small>GNU</small> Emacs style escape sequences, a second
+set of backslash escapes is available:
+</p>
+<dl compact="compact">
+<dt><code>\a</code></dt>
+<dd><p>alert (bell)
+</p></dd>
+<dt><code>\b</code></dt>
+<dd><p>backspace
+</p></dd>
+<dt><code>\d</code></dt>
+<dd><p>delete
+</p></dd>
+<dt><code>\f</code></dt>
+<dd><p>form feed
+</p></dd>
+<dt><code>\n</code></dt>
+<dd><p>newline
+</p></dd>
+<dt><code>\r</code></dt>
+<dd><p>carriage return
+</p></dd>
+<dt><code>\t</code></dt>
+<dd><p>horizontal tab
+</p></dd>
+<dt><code>\v</code></dt>
+<dd><p>vertical tab
+</p></dd>
+<dt><code>\<var>nnn</var></code></dt>
+<dd><p>the eight-bit character whose value is the octal value <var>nnn</var>
+(one to three digits)
+</p></dd>
+<dt><code>\x<var>HH</var></code></dt>
+<dd><p>the eight-bit character whose value is the hexadecimal value <var>HH</var>
+(one or two hex digits)
+</p></dd>
+</dl>
+
+<p>When entering the text of a macro, single or double quotes must
+be used to indicate a macro definition.
+Unquoted text is assumed to be a function name.
+In the macro body, the backslash escapes described above are expanded.
+Backslash will quote any other character in the macro text,
+including &lsquo;<samp>&quot;</samp>&rsquo; and &lsquo;<samp>'</samp>&rsquo;.
+For example, the following binding will make &lsquo;<samp><kbd>C-x</kbd> \</samp>&rsquo;
+insert a single &lsquo;<samp>\</samp>&rsquo; into the line:
+</p><div class="example">
+<pre class="example">&quot;\C-x\\&quot;: &quot;\\&quot;
+</pre></div>
+
+</dd>
+</dl>
+
+<hr>
+<span id="Conditional-Init-Constructs"></span><div class="header">
+<p>
+Next: <a href="#Sample-Init-File" accesskey="n" rel="next">Sample Init File</a>, Previous: <a href="#Readline-Init-File-Syntax" accesskey="p" rel="prev">Readline Init File Syntax</a>, Up: <a href="#Readline-Init-File" accesskey="u" rel="up">Readline Init File</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Conditional-Init-Constructs-1"></span><h4 class="subsection">8.3.2 Conditional Init Constructs</h4>
+
+<p>Readline implements a facility similar in spirit to the conditional
+compilation features of the C preprocessor which allows key
+bindings and variable settings to be performed as the result
+of tests.  There are four parser directives used.
+</p>
+<dl compact="compact">
+<dt><code>$if</code></dt>
+<dd><p>The <code>$if</code> construct allows bindings to be made based on the
+editing mode, the terminal being used, or the application using
+Readline.  The text of the test, after any comparison operator,
+extends to the end of the line;
+unless otherwise noted, no characters are required to isolate it.
+</p>
+<dl compact="compact">
+<dt><code>mode</code></dt>
+<dd><p>The <code>mode=</code> form of the <code>$if</code> directive is used to test
+whether Readline is in <code>emacs</code> or <code>vi</code> mode.
+This may be used in conjunction
+with the &lsquo;<samp>set keymap</samp>&rsquo; command, for instance, to set bindings in
+the <code>emacs-standard</code> and <code>emacs-ctlx</code> keymaps only if
+Readline is starting out in <code>emacs</code> mode.
+</p>
+</dd>
+<dt><code>term</code></dt>
+<dd><p>The <code>term=</code> form may be used to include terminal-specific
+key bindings, perhaps to bind the key sequences output by the
+terminal&rsquo;s function keys.  The word on the right side of the
+&lsquo;<samp>=</samp>&rsquo; is tested against both the full name of the terminal and
+the portion of the terminal name before the first &lsquo;<samp>-</samp>&rsquo;.  This
+allows <code>sun</code> to match both <code>sun</code> and <code>sun-cmd</code>,
+for instance.
+</p>
+</dd>
+<dt><code>version</code></dt>
+<dd><p>The <code>version</code> test may be used to perform comparisons against
+specific Readline versions.
+The <code>version</code> expands to the current Readline version.
+The set of comparison operators includes
+&lsquo;<samp>=</samp>&rsquo; (and &lsquo;<samp>==</samp>&rsquo;), &lsquo;<samp>!=</samp>&rsquo;, &lsquo;<samp>&lt;=</samp>&rsquo;, &lsquo;<samp>&gt;=</samp>&rsquo;, &lsquo;<samp>&lt;</samp>&rsquo;,
+and &lsquo;<samp>&gt;</samp>&rsquo;.
+The version number supplied on the right side of the operator consists
+of a major version number, an optional decimal point, and an optional
+minor version (e.g., &lsquo;<samp>7.1</samp>&rsquo;). If the minor version is omitted, it
+is assumed to be &lsquo;<samp>0</samp>&rsquo;.
+The operator may be separated from the string <code>version</code> and
+from the version number argument by whitespace.
+The following example sets a variable if the Readline version being used
+is 7.0 or newer:
+</p><div class="example">
+<pre class="example">$if version &gt;= 7.0
+set show-mode-in-prompt on
+$endif
+</pre></div>
+
+</dd>
+<dt><code>application</code></dt>
+<dd><p>The <var>application</var> construct is used to include
+application-specific settings.  Each program using the Readline
+library sets the <var>application name</var>, and you can test for
+a particular value. 
+This could be used to bind key sequences to functions useful for
+a specific program.  For instance, the following command adds a
+key sequence that quotes the current or previous word in Bash:
+</p><div class="example">
+<pre class="example">$if Bash
+# Quote the current or previous word
+&quot;\C-xq&quot;: &quot;\eb\&quot;\ef\&quot;&quot;
+$endif
+</pre></div>
+
+</dd>
+<dt><code>variable</code></dt>
+<dd><p>The <var>variable</var> construct provides simple equality tests for Readline
+variables and values.
+The permitted comparison operators are &lsquo;<samp>=</samp>&rsquo;, &lsquo;<samp>==</samp>&rsquo;, and &lsquo;<samp>!=</samp>&rsquo;.
+The variable name must be separated from the comparison operator by
+whitespace; the operator may be separated from the value on the right hand
+side by whitespace.
+Both string and boolean variables may be tested. Boolean variables must be
+tested against the values <var>on</var> and <var>off</var>.
+The following example is equivalent to the <code>mode=emacs</code> test described
+above:
+</p><div class="example">
+<pre class="example">$if editing-mode == emacs
+set show-mode-in-prompt on
+$endif
+</pre></div>
+</dd>
+</dl>
+
+</dd>
+<dt><code>$endif</code></dt>
+<dd><p>This command, as seen in the previous example, terminates an
+<code>$if</code> command.
+</p>
+</dd>
+<dt><code>$else</code></dt>
+<dd><p>Commands in this branch of the <code>$if</code> directive are executed if
+the test fails.
+</p>
+</dd>
+<dt><code>$include</code></dt>
+<dd><p>This directive takes a single filename as an argument and reads commands
+and bindings from that file.
+For example, the following directive reads from <samp>/etc/inputrc</samp>:
+</p><div class="example">
+<pre class="example">$include /etc/inputrc
+</pre></div>
+</dd>
+</dl>
+
+<hr>
+<span id="Sample-Init-File"></span><div class="header">
+<p>
+Previous: <a href="#Conditional-Init-Constructs" accesskey="p" rel="prev">Conditional Init Constructs</a>, Up: <a href="#Readline-Init-File" accesskey="u" rel="up">Readline Init File</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Sample-Init-File-1"></span><h4 class="subsection">8.3.3 Sample Init File</h4>
+
+<p>Here is an example of an <var>inputrc</var> file.  This illustrates key
+binding, variable assignment, and conditional syntax.
+</p>
+<div class="example">
+<pre class="example"># This file controls the behaviour of line input editing for
+# programs that use the GNU Readline library.  Existing
+# programs include FTP, Bash, and GDB.
+#
+# You can re-read the inputrc file with C-x C-r.
+# Lines beginning with '#' are comments.
+#
+# First, include any system-wide bindings and variable
+# assignments from /etc/Inputrc
+$include /etc/Inputrc
+
+#
+# Set various bindings for emacs mode.
+
+set editing-mode emacs 
+
+$if mode=emacs
+
+Meta-Control-h:	backward-kill-word	Text after the function name is ignored
+
+#
+# Arrow keys in keypad mode
+#
+#&quot;\M-OD&quot;:        backward-char
+#&quot;\M-OC&quot;:        forward-char
+#&quot;\M-OA&quot;:        previous-history
+#&quot;\M-OB&quot;:        next-history
+#
+# Arrow keys in ANSI mode
+#
+&quot;\M-[D&quot;:        backward-char
+&quot;\M-[C&quot;:        forward-char
+&quot;\M-[A&quot;:        previous-history
+&quot;\M-[B&quot;:        next-history
+#
+# Arrow keys in 8 bit keypad mode
+#
+#&quot;\M-\C-OD&quot;:       backward-char
+#&quot;\M-\C-OC&quot;:       forward-char
+#&quot;\M-\C-OA&quot;:       previous-history
+#&quot;\M-\C-OB&quot;:       next-history
+#
+# Arrow keys in 8 bit ANSI mode
+#
+#&quot;\M-\C-[D&quot;:       backward-char
+#&quot;\M-\C-[C&quot;:       forward-char
+#&quot;\M-\C-[A&quot;:       previous-history
+#&quot;\M-\C-[B&quot;:       next-history
+
+C-q: quoted-insert
+
+$endif
+
+# An old-style binding.  This happens to be the default.
+TAB: complete
+
+# Macros that are convenient for shell interaction
+$if Bash
+# edit the path
+&quot;\C-xp&quot;: &quot;PATH=${PATH}\e\C-e\C-a\ef\C-f&quot;
+# prepare to type a quoted word --
+# insert open and close double quotes
+# and move to just after the open quote
+&quot;\C-x\&quot;&quot;: &quot;\&quot;\&quot;\C-b&quot;
+# insert a backslash (testing backslash escapes
+# in sequences and macros)
+&quot;\C-x\\&quot;: &quot;\\&quot;
+# Quote the current or previous word
+&quot;\C-xq&quot;: &quot;\eb\&quot;\ef\&quot;&quot;
+# Add a binding to refresh the line, which is unbound
+&quot;\C-xr&quot;: redraw-current-line
+# Edit variable on current line.
+&quot;\M-\C-v&quot;: &quot;\C-a\C-k$\C-y\M-\C-e\C-a\C-y=&quot;
+$endif
+
+# use a visible bell if one is available
+set bell-style visible
+
+# don't strip characters to 7 bits when reading
+set input-meta on
+
+# allow iso-latin1 characters to be inserted rather
+# than converted to prefix-meta sequences
+set convert-meta off
+
+# display characters with the eighth bit set directly
+# rather than as meta-prefixed characters
+set output-meta on
+
+# if there are 150 or more possible completions for a word,
+# ask whether or not the user wants to see all of them
+set completion-query-items 150
+
+# For FTP
+$if Ftp
+&quot;\C-xg&quot;: &quot;get \M-?&quot;
+&quot;\C-xt&quot;: &quot;put \M-?&quot;
+&quot;\M-.&quot;: yank-last-arg
+$endif
+</pre></div>
+
+<hr>
+<span id="Bindable-Readline-Commands"></span><div class="header">
+<p>
+Next: <a href="#Readline-vi-Mode" accesskey="n" rel="next">Readline vi Mode</a>, Previous: <a href="#Readline-Init-File" accesskey="p" rel="prev">Readline Init File</a>, Up: <a href="#Command-Line-Editing" accesskey="u" rel="up">Command Line Editing</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Bindable-Readline-Commands-1"></span><h3 class="section">8.4 Bindable Readline Commands</h3>
+
+<table class="menu" border="0" cellspacing="0">
+<tr><td align="left" valign="top">&bull; <a href="#Commands-For-Moving" accesskey="1">Commands For Moving</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Moving about the line.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Commands-For-History" accesskey="2">Commands For History</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Getting at previous lines.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Commands-For-Text" accesskey="3">Commands For Text</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Commands for changing text.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Commands-For-Killing" accesskey="4">Commands For Killing</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Commands for killing and yanking.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Numeric-Arguments" accesskey="5">Numeric Arguments</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Specifying numeric arguments, repeat counts.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Commands-For-Completion" accesskey="6">Commands For Completion</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Getting Readline to do the typing for you.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Keyboard-Macros" accesskey="7">Keyboard Macros</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Saving and re-executing typed characters
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Miscellaneous-Commands" accesskey="8">Miscellaneous Commands</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Other miscellaneous commands.
+</td></tr>
+</table>
+
+<p>This section describes Readline commands that may be bound to key
+sequences.
+You can list your key bindings by executing
+<code>bind&nbsp;<span class="nolinebreak">-P</span></code><!-- /@w --> or, for a more terse format, suitable for an
+<var>inputrc</var> file, <code>bind&nbsp;<span class="nolinebreak">-p</span></code><!-- /@w -->.  (See <a href="#Bash-Builtins">Bash Builtins</a>.)
+Command names without an accompanying key sequence are unbound by default.
+</p>
+<p>In the following descriptions, <em>point</em> refers to the current cursor
+position, and <em>mark</em> refers to a cursor position saved by the
+<code>set-mark</code> command.
+The text between the point and mark is referred to as the <em>region</em>.
+</p>
+<hr>
+<span id="Commands-For-Moving"></span><div class="header">
+<p>
+Next: <a href="#Commands-For-History" accesskey="n" rel="next">Commands For History</a>, Up: <a href="#Bindable-Readline-Commands" accesskey="u" rel="up">Bindable Readline Commands</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Commands-For-Moving-1"></span><h4 class="subsection">8.4.1 Commands For Moving</h4>
+<dl compact="compact">
+<dt><code>beginning-of-line (C-a)</code>
+<span id="index-beginning_002dof_002dline-_0028C_002da_0029"></span>
+</dt>
+<dd><p>Move to the start of the current line.
+</p>
+</dd>
+<dt><code>end-of-line (C-e)</code>
+<span id="index-end_002dof_002dline-_0028C_002de_0029"></span>
+</dt>
+<dd><p>Move to the end of the line.
+</p>
+</dd>
+<dt><code>forward-char (C-f)</code>
+<span id="index-forward_002dchar-_0028C_002df_0029"></span>
+</dt>
+<dd><p>Move forward a character.
+</p>
+</dd>
+<dt><code>backward-char (C-b)</code>
+<span id="index-backward_002dchar-_0028C_002db_0029"></span>
+</dt>
+<dd><p>Move back a character.
+</p>
+</dd>
+<dt><code>forward-word (M-f)</code>
+<span id="index-forward_002dword-_0028M_002df_0029"></span>
+</dt>
+<dd><p>Move forward to the end of the next word.
+Words are composed of letters and digits.
+</p>
+</dd>
+<dt><code>backward-word (M-b)</code>
+<span id="index-backward_002dword-_0028M_002db_0029"></span>
+</dt>
+<dd><p>Move back to the start of the current or previous word.
+Words are composed of letters and digits.
+</p>
+</dd>
+<dt><code>shell-forward-word (M-C-f)</code>
+<span id="index-shell_002dforward_002dword-_0028M_002dC_002df_0029"></span>
+</dt>
+<dd><p>Move forward to the end of the next word.
+Words are delimited by non-quoted shell metacharacters.
+</p>
+</dd>
+<dt><code>shell-backward-word (M-C-b)</code>
+<span id="index-shell_002dbackward_002dword-_0028M_002dC_002db_0029"></span>
+</dt>
+<dd><p>Move back to the start of the current or previous word.
+Words are delimited by non-quoted shell metacharacters.
+</p>
+</dd>
+<dt><code>previous-screen-line ()</code>
+<span id="index-previous_002dscreen_002dline-_0028_0029"></span>
+</dt>
+<dd><p>Attempt to move point to the same physical screen column on the previous
+physical screen line. This will not have the desired effect if the current
+Readline line does not take up more than one physical line or if point is not
+greater than the length of the prompt plus the screen width.
+</p>
+</dd>
+<dt><code>next-screen-line ()</code>
+<span id="index-next_002dscreen_002dline-_0028_0029"></span>
+</dt>
+<dd><p>Attempt to move point to the same physical screen column on the next
+physical screen line. This will not have the desired effect if the current
+Readline line does not take up more than one physical line or if the length
+of the current Readline line is not greater than the length of the prompt
+plus the screen width.
+</p>
+</dd>
+<dt><code>clear-display (M-C-l)</code>
+<span id="index-clear_002ddisplay-_0028M_002dC_002dl_0029"></span>
+</dt>
+<dd><p>Clear the screen and, if possible, the terminal&rsquo;s scrollback buffer,
+then redraw the current line,
+leaving the current line at the top of the screen.
+</p>
+</dd>
+<dt><code>clear-screen (C-l)</code>
+<span id="index-clear_002dscreen-_0028C_002dl_0029"></span>
+</dt>
+<dd><p>Clear the screen,
+then redraw the current line,
+leaving the current line at the top of the screen.
+</p>
+</dd>
+<dt><code>redraw-current-line ()</code>
+<span id="index-redraw_002dcurrent_002dline-_0028_0029"></span>
+</dt>
+<dd><p>Refresh the current line.  By default, this is unbound.
+</p>
+</dd>
+</dl>
+
+<hr>
+<span id="Commands-For-History"></span><div class="header">
+<p>
+Next: <a href="#Commands-For-Text" accesskey="n" rel="next">Commands For Text</a>, Previous: <a href="#Commands-For-Moving" accesskey="p" rel="prev">Commands For Moving</a>, Up: <a href="#Bindable-Readline-Commands" accesskey="u" rel="up">Bindable Readline Commands</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Commands-For-Manipulating-The-History"></span><h4 class="subsection">8.4.2 Commands For Manipulating The History</h4>
+
+<dl compact="compact">
+<dt><code>accept-line (Newline or Return)</code>
+<span id="index-accept_002dline-_0028Newline-or-Return_0029"></span>
+</dt>
+<dd><p>Accept the line regardless of where the cursor is.
+If this line is
+non-empty, add it to the history list according to the setting of
+the <code>HISTCONTROL</code> and <code>HISTIGNORE</code> variables.
+If this line is a modified history line, then restore the history line
+to its original state.
+</p>
+</dd>
+<dt><code>previous-history (C-p)</code>
+<span id="index-previous_002dhistory-_0028C_002dp_0029"></span>
+</dt>
+<dd><p>Move &lsquo;back&rsquo; through the history list, fetching the previous command.
+</p>
+</dd>
+<dt><code>next-history (C-n)</code>
+<span id="index-next_002dhistory-_0028C_002dn_0029"></span>
+</dt>
+<dd><p>Move &lsquo;forward&rsquo; through the history list, fetching the next command.
+</p>
+</dd>
+<dt><code>beginning-of-history (M-&lt;)</code>
+<span id="index-beginning_002dof_002dhistory-_0028M_002d_003c_0029"></span>
+</dt>
+<dd><p>Move to the first line in the history.
+</p>
+</dd>
+<dt><code>end-of-history (M-&gt;)</code>
+<span id="index-end_002dof_002dhistory-_0028M_002d_003e_0029"></span>
+</dt>
+<dd><p>Move to the end of the input history, i.e., the line currently
+being entered.
+</p>
+</dd>
+<dt><code>reverse-search-history (C-r)</code>
+<span id="index-reverse_002dsearch_002dhistory-_0028C_002dr_0029"></span>
+</dt>
+<dd><p>Search backward starting at the current line and moving &lsquo;up&rsquo; through
+the history as necessary.  This is an incremental search.
+This command sets the region to the matched text and activates the mark.
+</p>
+</dd>
+<dt><code>forward-search-history (C-s)</code>
+<span id="index-forward_002dsearch_002dhistory-_0028C_002ds_0029"></span>
+</dt>
+<dd><p>Search forward starting at the current line and moving &lsquo;down&rsquo; through
+the history as necessary.  This is an incremental search.
+This command sets the region to the matched text and activates the mark.
+</p>
+</dd>
+<dt><code>non-incremental-reverse-search-history (M-p)</code>
+<span id="index-non_002dincremental_002dreverse_002dsearch_002dhistory-_0028M_002dp_0029"></span>
+</dt>
+<dd><p>Search backward starting at the current line and moving &lsquo;up&rsquo;
+through the history as necessary using a non-incremental search
+for a string supplied by the user.
+The search string may match anywhere in a history line.
+</p>
+</dd>
+<dt><code>non-incremental-forward-search-history (M-n)</code>
+<span id="index-non_002dincremental_002dforward_002dsearch_002dhistory-_0028M_002dn_0029"></span>
+</dt>
+<dd><p>Search forward starting at the current line and moving &lsquo;down&rsquo;
+through the history as necessary using a non-incremental search
+for a string supplied by the user.
+The search string may match anywhere in a history line.
+</p>
+</dd>
+<dt><code>history-search-forward ()</code>
+<span id="index-history_002dsearch_002dforward-_0028_0029"></span>
+</dt>
+<dd><p>Search forward through the history for the string of characters
+between the start of the current line and the point.
+The search string must match at the beginning of a history line.
+This is a non-incremental search.
+By default, this command is unbound.
+</p>
+</dd>
+<dt><code>history-search-backward ()</code>
+<span id="index-history_002dsearch_002dbackward-_0028_0029"></span>
+</dt>
+<dd><p>Search backward through the history for the string of characters
+between the start of the current line and the point.
+The search string must match at the beginning of a history line.
+This is a non-incremental search.
+By default, this command is unbound.
+</p>
+</dd>
+<dt><code>history-substring-search-forward ()</code>
+<span id="index-history_002dsubstring_002dsearch_002dforward-_0028_0029"></span>
+</dt>
+<dd><p>Search forward through the history for the string of characters
+between the start of the current line and the point.
+The search string may match anywhere in a history line.
+This is a non-incremental search.
+By default, this command is unbound.
+</p>
+</dd>
+<dt><code>history-substring-search-backward ()</code>
+<span id="index-history_002dsubstring_002dsearch_002dbackward-_0028_0029"></span>
+</dt>
+<dd><p>Search backward through the history for the string of characters
+between the start of the current line and the point.
+The search string may match anywhere in a history line.
+This is a non-incremental search.
+By default, this command is unbound.
+</p>
+</dd>
+<dt><code>yank-nth-arg (M-C-y)</code>
+<span id="index-yank_002dnth_002darg-_0028M_002dC_002dy_0029"></span>
+</dt>
+<dd><p>Insert the first argument to the previous command (usually
+the second word on the previous line) at point.
+With an argument <var>n</var>,
+insert the <var>n</var>th word from the previous command (the words
+in the previous command begin with word 0).  A negative argument
+inserts the <var>n</var>th word from the end of the previous command.
+Once the argument <var>n</var> is computed, the argument is extracted
+as if the &lsquo;<samp>!<var>n</var></samp>&rsquo; history expansion had been specified.
+</p>
+</dd>
+<dt><code>yank-last-arg (M-. or M-_)</code>
+<span id="index-yank_002dlast_002darg-_0028M_002d_002e-or-M_002d_005f_0029"></span>
+</dt>
+<dd><p>Insert last argument to the previous command (the last word of the
+previous history entry).
+With a numeric argument, behave exactly like <code>yank-nth-arg</code>.
+Successive calls to <code>yank-last-arg</code> move back through the history
+list, inserting the last word (or the word specified by the argument to
+the first call) of each line in turn.
+Any numeric argument supplied to these successive calls determines
+the direction to move through the history.  A negative argument switches
+the direction through the history (back or forward).
+The history expansion facilities are used to extract the last argument,
+as if the &lsquo;<samp>!$</samp>&rsquo; history expansion had been specified.
+</p>
+</dd>
+<dt><code>operate-and-get-next (C-o)</code>
+<span id="index-operate_002dand_002dget_002dnext-_0028C_002do_0029"></span>
+</dt>
+<dd><p>Accept the current line for return to the calling application as if a
+newline had been entered,
+and fetch the next line relative to the current line from the history
+for editing.
+A numeric argument, if supplied, specifies the history entry to use instead
+of the current line.
+</p>
+</dd>
+</dl>
+
+<hr>
+<span id="Commands-For-Text"></span><div class="header">
+<p>
+Next: <a href="#Commands-For-Killing" accesskey="n" rel="next">Commands For Killing</a>, Previous: <a href="#Commands-For-History" accesskey="p" rel="prev">Commands For History</a>, Up: <a href="#Bindable-Readline-Commands" accesskey="u" rel="up">Bindable Readline Commands</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Commands-For-Changing-Text"></span><h4 class="subsection">8.4.3 Commands For Changing Text</h4>
+
+<dl compact="compact">
+<dt><code><i>end-of-file</i> (usually C-d)</code>
+<span id="index-end_002dof_002dfile-_0028usually-C_002dd_0029"></span>
+</dt>
+<dd><p>The character indicating end-of-file as set, for example, by
+<code>stty</code>.  If this character is read when there are no characters
+on the line, and point is at the beginning of the line, Readline
+interprets it as the end of input and returns <small>EOF</small>.
+</p>
+</dd>
+<dt><code>delete-char (C-d)</code>
+<span id="index-delete_002dchar-_0028C_002dd_0029"></span>
+</dt>
+<dd><p>Delete the character at point.  If this function is bound to the
+same character as the tty <small>EOF</small> character, as <kbd>C-d</kbd>
+commonly is, see above for the effects.
+</p>
+</dd>
+<dt><code>backward-delete-char (Rubout)</code>
+<span id="index-backward_002ddelete_002dchar-_0028Rubout_0029"></span>
+</dt>
+<dd><p>Delete the character behind the cursor.  A numeric argument means
+to kill the characters instead of deleting them.
+</p>
+</dd>
+<dt><code>forward-backward-delete-char ()</code>
+<span id="index-forward_002dbackward_002ddelete_002dchar-_0028_0029"></span>
+</dt>
+<dd><p>Delete the character under the cursor, unless the cursor is at the
+end of the line, in which case the character behind the cursor is
+deleted.  By default, this is not bound to a key.
+</p>
+</dd>
+<dt><code>quoted-insert (C-q or C-v)</code>
+<span id="index-quoted_002dinsert-_0028C_002dq-or-C_002dv_0029"></span>
+</dt>
+<dd><p>Add the next character typed to the line verbatim.  This is
+how to insert key sequences like <kbd>C-q</kbd>, for example.
+</p>
+
+</dd>
+<dt><code>self-insert (a, b, A, 1, !, &hellip;)</code>
+<span id="index-self_002dinsert-_0028a_002c-b_002c-A_002c-1_002c-_0021_002c-_2026_0029"></span>
+</dt>
+<dd><p>Insert yourself.
+</p>
+</dd>
+<dt><code>bracketed-paste-begin ()</code>
+<span id="index-bracketed_002dpaste_002dbegin-_0028_0029"></span>
+</dt>
+<dd><p>This function is intended to be bound to the &quot;bracketed paste&quot; escape
+sequence sent by some terminals, and such a binding is assigned by default.
+It allows Readline to insert the pasted text as a single unit without treating
+each character as if it had been read from the keyboard.  The characters
+are inserted as if each one was bound to <code>self-insert</code> instead of
+executing any editing commands.
+</p>
+<p>Bracketed paste sets the region (the characters between point and the mark)
+to the inserted text. It uses the concept of an <em>active mark</em>: when the
+mark is active, Readline redisplay uses the terminal&rsquo;s standout mode to
+denote the region.
+</p>
+</dd>
+<dt><code>transpose-chars (C-t)</code>
+<span id="index-transpose_002dchars-_0028C_002dt_0029"></span>
+</dt>
+<dd><p>Drag the character before the cursor forward over
+the character at the cursor, moving the
+cursor forward as well.  If the insertion point
+is at the end of the line, then this
+transposes the last two characters of the line.
+Negative arguments have no effect.
+</p>
+</dd>
+<dt><code>transpose-words (M-t)</code>
+<span id="index-transpose_002dwords-_0028M_002dt_0029"></span>
+</dt>
+<dd><p>Drag the word before point past the word after point,
+moving point past that word as well.
+If the insertion point is at the end of the line, this transposes
+the last two words on the line.
+</p>
+</dd>
+<dt><code>upcase-word (M-u)</code>
+<span id="index-upcase_002dword-_0028M_002du_0029"></span>
+</dt>
+<dd><p>Uppercase the current (or following) word.  With a negative argument,
+uppercase the previous word, but do not move the cursor.
+</p>
+</dd>
+<dt><code>downcase-word (M-l)</code>
+<span id="index-downcase_002dword-_0028M_002dl_0029"></span>
+</dt>
+<dd><p>Lowercase the current (or following) word.  With a negative argument,
+lowercase the previous word, but do not move the cursor.
+</p>
+</dd>
+<dt><code>capitalize-word (M-c)</code>
+<span id="index-capitalize_002dword-_0028M_002dc_0029"></span>
+</dt>
+<dd><p>Capitalize the current (or following) word.  With a negative argument,
+capitalize the previous word, but do not move the cursor.
+</p>
+</dd>
+<dt><code>overwrite-mode ()</code>
+<span id="index-overwrite_002dmode-_0028_0029"></span>
+</dt>
+<dd><p>Toggle overwrite mode.  With an explicit positive numeric argument,
+switches to overwrite mode.  With an explicit non-positive numeric
+argument, switches to insert mode.  This command affects only
+<code>emacs</code> mode; <code>vi</code> mode does overwrite differently.
+Each call to <code>readline()</code> starts in insert mode.
+</p>
+<p>In overwrite mode, characters bound to <code>self-insert</code> replace
+the text at point rather than pushing the text to the right.
+Characters bound to <code>backward-delete-char</code> replace the character
+before point with a space.
+</p>
+<p>By default, this command is unbound.
+</p>
+</dd>
+</dl>
+
+<hr>
+<span id="Commands-For-Killing"></span><div class="header">
+<p>
+Next: <a href="#Numeric-Arguments" accesskey="n" rel="next">Numeric Arguments</a>, Previous: <a href="#Commands-For-Text" accesskey="p" rel="prev">Commands For Text</a>, Up: <a href="#Bindable-Readline-Commands" accesskey="u" rel="up">Bindable Readline Commands</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Killing-And-Yanking"></span><h4 class="subsection">8.4.4 Killing And Yanking</h4>
+
+<dl compact="compact">
+<dt><code>kill-line (C-k)</code>
+<span id="index-kill_002dline-_0028C_002dk_0029"></span>
+</dt>
+<dd><p>Kill the text from point to the end of the line.
+With a negative numeric argument, kill backward from the cursor to the
+beginning of the current line.
+</p>
+</dd>
+<dt><code>backward-kill-line (C-x Rubout)</code>
+<span id="index-backward_002dkill_002dline-_0028C_002dx-Rubout_0029"></span>
+</dt>
+<dd><p>Kill backward from the cursor to the beginning of the current line.
+With a negative numeric argument, kill forward from the cursor to the
+end of the current line.
+</p>
+</dd>
+<dt><code>unix-line-discard (C-u)</code>
+<span id="index-unix_002dline_002ddiscard-_0028C_002du_0029"></span>
+</dt>
+<dd><p>Kill backward from the cursor to the beginning of the current line.
+</p>
+</dd>
+<dt><code>kill-whole-line ()</code>
+<span id="index-kill_002dwhole_002dline-_0028_0029"></span>
+</dt>
+<dd><p>Kill all characters on the current line, no matter where point is.
+By default, this is unbound.
+</p>
+</dd>
+<dt><code>kill-word (M-d)</code>
+<span id="index-kill_002dword-_0028M_002dd_0029"></span>
+</dt>
+<dd><p>Kill from point to the end of the current word, or if between
+words, to the end of the next word.
+Word boundaries are the same as <code>forward-word</code>.
+</p>
+</dd>
+<dt><code>backward-kill-word (M-<span class="key">DEL</span>)</code>
+<span id="index-backward_002dkill_002dword-_0028M_002dDEL_0029"></span>
+</dt>
+<dd><p>Kill the word behind point.
+Word boundaries are the same as <code>backward-word</code>.
+</p>
+</dd>
+<dt><code>shell-kill-word (M-C-d)</code>
+<span id="index-shell_002dkill_002dword-_0028M_002dC_002dd_0029"></span>
+</dt>
+<dd><p>Kill from point to the end of the current word, or if between
+words, to the end of the next word.
+Word boundaries are the same as <code>shell-forward-word</code>.
+</p>
+</dd>
+<dt><code>shell-backward-kill-word ()</code>
+<span id="index-shell_002dbackward_002dkill_002dword-_0028_0029"></span>
+</dt>
+<dd><p>Kill the word behind point.
+Word boundaries are the same as <code>shell-backward-word</code>.
+</p>
+</dd>
+<dt><code>shell-transpose-words (M-C-t)</code>
+<span id="index-shell_002dtranspose_002dwords-_0028M_002dC_002dt_0029"></span>
+</dt>
+<dd><p>Drag the word before point past the word after point,
+moving point past that word as well.
+If the insertion point is at the end of the line, this transposes
+the last two words on the line.
+Word boundaries are the same as <code>shell-forward-word</code> and
+<code>shell-backward-word</code>.
+</p>
+</dd>
+<dt><code>unix-word-rubout (C-w)</code>
+<span id="index-unix_002dword_002drubout-_0028C_002dw_0029"></span>
+</dt>
+<dd><p>Kill the word behind point, using white space as a word boundary.
+The killed text is saved on the kill-ring.
+</p>
+</dd>
+<dt><code>unix-filename-rubout ()</code>
+<span id="index-unix_002dfilename_002drubout-_0028_0029"></span>
+</dt>
+<dd><p>Kill the word behind point, using white space and the slash character
+as the word boundaries.
+The killed text is saved on the kill-ring.
+</p>
+</dd>
+<dt><code>delete-horizontal-space ()</code>
+<span id="index-delete_002dhorizontal_002dspace-_0028_0029"></span>
+</dt>
+<dd><p>Delete all spaces and tabs around point.  By default, this is unbound.
+</p>
+</dd>
+<dt><code>kill-region ()</code>
+<span id="index-kill_002dregion-_0028_0029"></span>
+</dt>
+<dd><p>Kill the text in the current region.
+By default, this command is unbound.
+</p>
+</dd>
+<dt><code>copy-region-as-kill ()</code>
+<span id="index-copy_002dregion_002das_002dkill-_0028_0029"></span>
+</dt>
+<dd><p>Copy the text in the region to the kill buffer, so it can be yanked
+right away.  By default, this command is unbound.
+</p>
+</dd>
+<dt><code>copy-backward-word ()</code>
+<span id="index-copy_002dbackward_002dword-_0028_0029"></span>
+</dt>
+<dd><p>Copy the word before point to the kill buffer.
+The word boundaries are the same as <code>backward-word</code>.
+By default, this command is unbound.
+</p>
+</dd>
+<dt><code>copy-forward-word ()</code>
+<span id="index-copy_002dforward_002dword-_0028_0029"></span>
+</dt>
+<dd><p>Copy the word following point to the kill buffer.
+The word boundaries are the same as <code>forward-word</code>.
+By default, this command is unbound.
+</p>
+</dd>
+<dt><code>yank (C-y)</code>
+<span id="index-yank-_0028C_002dy_0029"></span>
+</dt>
+<dd><p>Yank the top of the kill ring into the buffer at point.
+</p>
+</dd>
+<dt><code>yank-pop (M-y)</code>
+<span id="index-yank_002dpop-_0028M_002dy_0029"></span>
+</dt>
+<dd><p>Rotate the kill-ring, and yank the new top.  You can only do this if
+the prior command is <code>yank</code> or <code>yank-pop</code>.
+</p></dd>
+</dl>
+
+<hr>
+<span id="Numeric-Arguments"></span><div class="header">
+<p>
+Next: <a href="#Commands-For-Completion" accesskey="n" rel="next">Commands For Completion</a>, Previous: <a href="#Commands-For-Killing" accesskey="p" rel="prev">Commands For Killing</a>, Up: <a href="#Bindable-Readline-Commands" accesskey="u" rel="up">Bindable Readline Commands</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Specifying-Numeric-Arguments"></span><h4 class="subsection">8.4.5 Specifying Numeric Arguments</h4>
+<dl compact="compact">
+<dt><code>digit-argument (<kbd>M-0</kbd>, <kbd>M-1</kbd>, &hellip; <kbd>M--</kbd>)</code>
+<span id="index-digit_002dargument-_0028M_002d0_002c-M_002d1_002c-_2026-M_002d_002d_0029"></span>
+</dt>
+<dd><p>Add this digit to the argument already accumulating, or start a new
+argument.  <kbd>M--</kbd> starts a negative argument.
+</p>
+</dd>
+<dt><code>universal-argument ()</code>
+<span id="index-universal_002dargument-_0028_0029"></span>
+</dt>
+<dd><p>This is another way to specify an argument.
+If this command is followed by one or more digits, optionally with a
+leading minus sign, those digits define the argument.
+If the command is followed by digits, executing <code>universal-argument</code>
+again ends the numeric argument, but is otherwise ignored.
+As a special case, if this command is immediately followed by a
+character that is neither a digit nor minus sign, the argument count
+for the next command is multiplied by four.
+The argument count is initially one, so executing this function the
+first time makes the argument count four, a second time makes the
+argument count sixteen, and so on.
+By default, this is not bound to a key.
+</p></dd>
+</dl>
+
+<hr>
+<span id="Commands-For-Completion"></span><div class="header">
+<p>
+Next: <a href="#Keyboard-Macros" accesskey="n" rel="next">Keyboard Macros</a>, Previous: <a href="#Numeric-Arguments" accesskey="p" rel="prev">Numeric Arguments</a>, Up: <a href="#Bindable-Readline-Commands" accesskey="u" rel="up">Bindable Readline Commands</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Letting-Readline-Type-For-You"></span><h4 class="subsection">8.4.6 Letting Readline Type For You</h4>
+
+<dl compact="compact">
+<dt><code>complete (<span class="key">TAB</span>)</code>
+<span id="index-complete-_0028TAB_0029"></span>
+</dt>
+<dd><p>Attempt to perform completion on the text before point.
+The actual completion performed is application-specific.
+Bash attempts completion treating the text as a variable (if the
+text begins with &lsquo;<samp>$</samp>&rsquo;), username (if the text begins with
+&lsquo;<samp>~</samp>&rsquo;), hostname (if the text begins with &lsquo;<samp>@</samp>&rsquo;), or
+command (including aliases and functions) in turn.  If none 
+of these produces a match, filename completion is attempted.
+</p>
+</dd>
+<dt><code>possible-completions (M-?)</code>
+<span id="index-possible_002dcompletions-_0028M_002d_003f_0029"></span>
+</dt>
+<dd><p>List the possible completions of the text before point.
+When displaying completions, Readline sets the number of columns used
+for display to the value of <code>completion-display-width</code>, the value of
+the environment variable <code>COLUMNS</code>, or the screen width, in that order.
+</p>
+</dd>
+<dt><code>insert-completions (M-*)</code>
+<span id="index-insert_002dcompletions-_0028M_002d_002a_0029"></span>
+</dt>
+<dd><p>Insert all completions of the text before point that would have
+been generated by <code>possible-completions</code>.
+</p>
+</dd>
+<dt><code>menu-complete ()</code>
+<span id="index-menu_002dcomplete-_0028_0029"></span>
+</dt>
+<dd><p>Similar to <code>complete</code>, but replaces the word to be completed
+with a single match from the list of possible completions.
+Repeated execution of <code>menu-complete</code> steps through the list
+of possible completions, inserting each match in turn.
+At the end of the list of completions, the bell is rung
+(subject to the setting of <code>bell-style</code>)
+and the original text is restored.
+An argument of <var>n</var> moves <var>n</var> positions forward in the list
+of matches; a negative argument may be used to move backward
+through the list.
+This command is intended to be bound to <tt class="key">TAB</tt>, but is unbound
+by default.
+</p>
+</dd>
+<dt><code>menu-complete-backward ()</code>
+<span id="index-menu_002dcomplete_002dbackward-_0028_0029"></span>
+</dt>
+<dd><p>Identical to <code>menu-complete</code>, but moves backward through the list
+of possible completions, as if <code>menu-complete</code> had been given a
+negative argument.
+</p>
+</dd>
+<dt><code>delete-char-or-list ()</code>
+<span id="index-delete_002dchar_002dor_002dlist-_0028_0029"></span>
+</dt>
+<dd><p>Deletes the character under the cursor if not at the beginning or
+end of the line (like <code>delete-char</code>).
+If at the end of the line, behaves identically to
+<code>possible-completions</code>.
+This command is unbound by default.
+</p>
+</dd>
+<dt><code>complete-filename (M-/)</code>
+<span id="index-complete_002dfilename-_0028M_002d_002f_0029"></span>
+</dt>
+<dd><p>Attempt filename completion on the text before point.
+</p>
+</dd>
+<dt><code>possible-filename-completions (C-x /)</code>
+<span id="index-possible_002dfilename_002dcompletions-_0028C_002dx-_002f_0029"></span>
+</dt>
+<dd><p>List the possible completions of the text before point,
+treating it as a filename.
+</p>
+</dd>
+<dt><code>complete-username (M-~)</code>
+<span id="index-complete_002dusername-_0028M_002d_007e_0029"></span>
+</dt>
+<dd><p>Attempt completion on the text before point, treating
+it as a username.
+</p>
+</dd>
+<dt><code>possible-username-completions (C-x ~)</code>
+<span id="index-possible_002dusername_002dcompletions-_0028C_002dx-_007e_0029"></span>
+</dt>
+<dd><p>List the possible completions of the text before point,
+treating it as a username.
+</p>
+</dd>
+<dt><code>complete-variable (M-$)</code>
+<span id="index-complete_002dvariable-_0028M_002d_0024_0029"></span>
+</dt>
+<dd><p>Attempt completion on the text before point, treating
+it as a shell variable.
+</p>
+</dd>
+<dt><code>possible-variable-completions (C-x $)</code>
+<span id="index-possible_002dvariable_002dcompletions-_0028C_002dx-_0024_0029"></span>
+</dt>
+<dd><p>List the possible completions of the text before point,
+treating it as a shell variable.
+</p>
+</dd>
+<dt><code>complete-hostname (M-@)</code>
+<span id="index-complete_002dhostname-_0028M_002d_0040_0029"></span>
+</dt>
+<dd><p>Attempt completion on the text before point, treating
+it as a hostname.
+</p>
+</dd>
+<dt><code>possible-hostname-completions (C-x @)</code>
+<span id="index-possible_002dhostname_002dcompletions-_0028C_002dx-_0040_0029"></span>
+</dt>
+<dd><p>List the possible completions of the text before point,
+treating it as a hostname.
+</p>
+</dd>
+<dt><code>complete-command (M-!)</code>
+<span id="index-complete_002dcommand-_0028M_002d_0021_0029"></span>
+</dt>
+<dd><p>Attempt completion on the text before point, treating
+it as a command name.  Command completion attempts to
+match the text against aliases, reserved words, shell
+functions, shell builtins, and finally executable filenames,
+in that order.
+</p>
+</dd>
+<dt><code>possible-command-completions (C-x !)</code>
+<span id="index-possible_002dcommand_002dcompletions-_0028C_002dx-_0021_0029"></span>
+</dt>
+<dd><p>List the possible completions of the text before point,
+treating it as a command name.
+</p>
+</dd>
+<dt><code>dynamic-complete-history (M-<span class="key">TAB</span>)</code>
+<span id="index-dynamic_002dcomplete_002dhistory-_0028M_002dTAB_0029"></span>
+</dt>
+<dd><p>Attempt completion on the text before point, comparing
+the text against lines from the history list for possible
+completion matches.
+</p>
+</dd>
+<dt><code>dabbrev-expand ()</code>
+<span id="index-dabbrev_002dexpand-_0028_0029"></span>
+</dt>
+<dd><p>Attempt menu completion on the text before point, comparing
+the text against lines from the history list for possible
+completion matches.
+</p>
+</dd>
+<dt><code>complete-into-braces (M-{)</code>
+<span id="index-complete_002dinto_002dbraces-_0028M_002d_007b_0029"></span>
+</dt>
+<dd><p>Perform filename completion and insert the list of possible completions
+enclosed within braces so the list is available to the shell
+(see <a href="#Brace-Expansion">Brace Expansion</a>).
+</p>
+</dd>
+</dl>
+
+<hr>
+<span id="Keyboard-Macros"></span><div class="header">
+<p>
+Next: <a href="#Miscellaneous-Commands" accesskey="n" rel="next">Miscellaneous Commands</a>, Previous: <a href="#Commands-For-Completion" accesskey="p" rel="prev">Commands For Completion</a>, Up: <a href="#Bindable-Readline-Commands" accesskey="u" rel="up">Bindable Readline Commands</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Keyboard-Macros-1"></span><h4 class="subsection">8.4.7 Keyboard Macros</h4>
+<dl compact="compact">
+<dt><code>start-kbd-macro (C-x ()</code>
+<span id="index-start_002dkbd_002dmacro-_0028C_002dx-_0028_0029"></span>
+</dt>
+<dd><p>Begin saving the characters typed into the current keyboard macro.
+</p>
+</dd>
+<dt><code>end-kbd-macro (C-x ))</code>
+<span id="index-end_002dkbd_002dmacro-_0028C_002dx-_0029_0029"></span>
+</dt>
+<dd><p>Stop saving the characters typed into the current keyboard macro
+and save the definition.
+</p>
+</dd>
+<dt><code>call-last-kbd-macro (C-x e)</code>
+<span id="index-call_002dlast_002dkbd_002dmacro-_0028C_002dx-e_0029"></span>
+</dt>
+<dd><p>Re-execute the last keyboard macro defined, by making the characters
+in the macro appear as if typed at the keyboard.
+</p>
+</dd>
+<dt><code>print-last-kbd-macro ()</code>
+<span id="index-print_002dlast_002dkbd_002dmacro-_0028_0029"></span>
+</dt>
+<dd><p>Print the last keboard macro defined in a format suitable for the
+<var>inputrc</var> file.
+</p>
+</dd>
+</dl>
+
+<hr>
+<span id="Miscellaneous-Commands"></span><div class="header">
+<p>
+Previous: <a href="#Keyboard-Macros" accesskey="p" rel="prev">Keyboard Macros</a>, Up: <a href="#Bindable-Readline-Commands" accesskey="u" rel="up">Bindable Readline Commands</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Some-Miscellaneous-Commands"></span><h4 class="subsection">8.4.8 Some Miscellaneous Commands</h4>
+<dl compact="compact">
+<dt><code>re-read-init-file (C-x C-r)</code>
+<span id="index-re_002dread_002dinit_002dfile-_0028C_002dx-C_002dr_0029"></span>
+</dt>
+<dd><p>Read in the contents of the <var>inputrc</var> file, and incorporate
+any bindings or variable assignments found there.
+</p>
+</dd>
+<dt><code>abort (C-g)</code>
+<span id="index-abort-_0028C_002dg_0029"></span>
+</dt>
+<dd><p>Abort the current editing command and
+ring the terminal&rsquo;s bell (subject to the setting of
+<code>bell-style</code>).
+</p>
+</dd>
+<dt><code>do-lowercase-version (M-A, M-B, M-<var>x</var>, &hellip;)</code>
+<span id="index-do_002dlowercase_002dversion-_0028M_002dA_002c-M_002dB_002c-M_002dx_002c-_2026_0029"></span>
+</dt>
+<dd><p>If the metafied character <var>x</var> is upper case, run the command
+that is bound to the corresponding metafied lower case character.
+The behavior is undefined if <var>x</var> is already lower case.
+</p>
+</dd>
+<dt><code>prefix-meta (<span class="key">ESC</span>)</code>
+<span id="index-prefix_002dmeta-_0028ESC_0029"></span>
+</dt>
+<dd><p>Metafy the next character typed.  This is for keyboards
+without a meta key.  Typing &lsquo;<samp><span class="key">ESC</span> f</samp>&rsquo; is equivalent to typing
+<kbd>M-f</kbd>.
+</p>
+</dd>
+<dt><code>undo (C-_ or C-x C-u)</code>
+<span id="index-undo-_0028C_002d_005f-or-C_002dx-C_002du_0029"></span>
+</dt>
+<dd><p>Incremental undo, separately remembered for each line.
+</p>
+</dd>
+<dt><code>revert-line (M-r)</code>
+<span id="index-revert_002dline-_0028M_002dr_0029"></span>
+</dt>
+<dd><p>Undo all changes made to this line.  This is like executing the <code>undo</code>
+command enough times to get back to the beginning.
+</p>
+</dd>
+<dt><code>tilde-expand (M-&amp;)</code>
+<span id="index-tilde_002dexpand-_0028M_002d_0026_0029"></span>
+</dt>
+<dd><p>Perform tilde expansion on the current word.
+</p>
+</dd>
+<dt><code>set-mark (C-@)</code>
+<span id="index-set_002dmark-_0028C_002d_0040_0029"></span>
+</dt>
+<dd><p>Set the mark to the point.  If a
+numeric argument is supplied, the mark is set to that position.
+</p>
+</dd>
+<dt><code>exchange-point-and-mark (C-x C-x)</code>
+<span id="index-exchange_002dpoint_002dand_002dmark-_0028C_002dx-C_002dx_0029"></span>
+</dt>
+<dd><p>Swap the point with the mark.  The current cursor position is set to
+the saved position, and the old cursor position is saved as the mark.
+</p>
+</dd>
+<dt><code>character-search (C-])</code>
+<span id="index-character_002dsearch-_0028C_002d_005d_0029"></span>
+</dt>
+<dd><p>A character is read and point is moved to the next occurrence of that
+character.  A negative count searches for previous occurrences.
+</p>
+</dd>
+<dt><code>character-search-backward (M-C-])</code>
+<span id="index-character_002dsearch_002dbackward-_0028M_002dC_002d_005d_0029"></span>
+</dt>
+<dd><p>A character is read and point is moved to the previous occurrence
+of that character.  A negative count searches for subsequent
+occurrences.
+</p>
+</dd>
+<dt><code>skip-csi-sequence ()</code>
+<span id="index-skip_002dcsi_002dsequence-_0028_0029"></span>
+</dt>
+<dd><p>Read enough characters to consume a multi-key sequence such as those
+defined for keys like Home and End.  Such sequences begin with a
+Control Sequence Indicator (CSI), usually ESC-[.  If this sequence is
+bound to &quot;\e[&quot;, keys producing such sequences will have no effect
+unless explicitly bound to a readline command, instead of inserting
+stray characters into the editing buffer.  This is unbound by default,
+but usually bound to ESC-[.
+</p>
+</dd>
+<dt><code>insert-comment (M-#)</code>
+<span id="index-insert_002dcomment-_0028M_002d_0023_0029"></span>
+</dt>
+<dd><p>Without a numeric argument, the value of the <code>comment-begin</code>
+variable is inserted at the beginning of the current line.
+If a numeric argument is supplied, this command acts as a toggle:  if
+the characters at the beginning of the line do not match the value
+of <code>comment-begin</code>, the value is inserted, otherwise
+the characters in <code>comment-begin</code> are deleted from the beginning of
+the line.
+In either case, the line is accepted as if a newline had been typed.
+The default value of <code>comment-begin</code> causes this command
+to make the current line a shell comment.
+If a numeric argument causes the comment character to be removed, the line
+will be executed by the shell.
+</p>
+</dd>
+<dt><code>dump-functions ()</code>
+<span id="index-dump_002dfunctions-_0028_0029"></span>
+</dt>
+<dd><p>Print all of the functions and their key bindings to the
+Readline output stream.  If a numeric argument is supplied,
+the output is formatted in such a way that it can be made part
+of an <var>inputrc</var> file.  This command is unbound by default.
+</p>
+</dd>
+<dt><code>dump-variables ()</code>
+<span id="index-dump_002dvariables-_0028_0029"></span>
+</dt>
+<dd><p>Print all of the settable variables and their values to the
+Readline output stream.  If a numeric argument is supplied,
+the output is formatted in such a way that it can be made part
+of an <var>inputrc</var> file.  This command is unbound by default.
+</p>
+</dd>
+<dt><code>dump-macros ()</code>
+<span id="index-dump_002dmacros-_0028_0029"></span>
+</dt>
+<dd><p>Print all of the Readline key sequences bound to macros and the
+strings they output.  If a numeric argument is supplied,
+the output is formatted in such a way that it can be made part
+of an <var>inputrc</var> file.  This command is unbound by default.
+</p>
+</dd>
+<dt><code>glob-complete-word (M-g)</code>
+<span id="index-glob_002dcomplete_002dword-_0028M_002dg_0029"></span>
+</dt>
+<dd><p>The word before point is treated as a pattern for pathname expansion,
+with an asterisk implicitly appended.  This pattern is used to
+generate a list of matching file names for possible completions.
+</p>
+</dd>
+<dt><code>glob-expand-word (C-x *)</code>
+<span id="index-glob_002dexpand_002dword-_0028C_002dx-_002a_0029"></span>
+</dt>
+<dd><p>The word before point is treated as a pattern for pathname expansion,
+and the list of matching file names is inserted, replacing the word.
+If a numeric argument is supplied, a &lsquo;<samp>*</samp>&rsquo; is appended before
+pathname expansion.
+</p>
+</dd>
+<dt><code>glob-list-expansions (C-x g)</code>
+<span id="index-glob_002dlist_002dexpansions-_0028C_002dx-g_0029"></span>
+</dt>
+<dd><p>The list of expansions that would have been generated by
+<code>glob-expand-word</code> is displayed, and the line is redrawn.
+If a numeric argument is supplied, a &lsquo;<samp>*</samp>&rsquo; is appended before
+pathname expansion.
+</p>
+</dd>
+<dt><code>display-shell-version (C-x C-v)</code>
+<span id="index-display_002dshell_002dversion-_0028C_002dx-C_002dv_0029"></span>
+</dt>
+<dd><p>Display version information about the current instance of Bash.
+</p>
+</dd>
+<dt><code>shell-expand-line (M-C-e)</code>
+<span id="index-shell_002dexpand_002dline-_0028M_002dC_002de_0029"></span>
+</dt>
+<dd><p>Expand the line as the shell does.
+This performs alias and history expansion as well as all of the shell
+word expansions (see <a href="#Shell-Expansions">Shell Expansions</a>).
+</p>
+</dd>
+<dt><code>history-expand-line (M-^)</code>
+<span id="index-history_002dexpand_002dline-_0028M_002d_005e_0029"></span>
+</dt>
+<dd><p>Perform history expansion on the current line.
+</p>
+</dd>
+<dt><code>magic-space ()</code>
+<span id="index-magic_002dspace-_0028_0029"></span>
+</dt>
+<dd><p>Perform history expansion on the current line and insert a space
+(see <a href="#History-Interaction">History Interaction</a>).
+</p>
+</dd>
+<dt><code>alias-expand-line ()</code>
+<span id="index-alias_002dexpand_002dline-_0028_0029"></span>
+</dt>
+<dd><p>Perform alias expansion on the current line (see <a href="#Aliases">Aliases</a>).
+</p>
+</dd>
+<dt><code>history-and-alias-expand-line ()</code>
+<span id="index-history_002dand_002dalias_002dexpand_002dline-_0028_0029"></span>
+</dt>
+<dd><p>Perform history and alias expansion on the current line.
+</p>
+</dd>
+<dt><code>insert-last-argument (M-. or M-_)</code>
+<span id="index-insert_002dlast_002dargument-_0028M_002d_002e-or-M_002d_005f_0029"></span>
+</dt>
+<dd><p>A synonym for <code>yank-last-arg</code>.
+</p>
+</dd>
+<dt><code>edit-and-execute-command (C-x C-e)</code>
+<span id="index-edit_002dand_002dexecute_002dcommand-_0028C_002dx-C_002de_0029"></span>
+</dt>
+<dd><p>Invoke an editor on the current command line, and execute the result as shell
+commands.
+Bash attempts to invoke
+<code>$VISUAL</code>, <code>$EDITOR</code>, and <code>emacs</code>
+as the editor, in that order.
+</p>
+
+
+</dd>
+</dl>
+
+<hr>
+<span id="Readline-vi-Mode"></span><div class="header">
+<p>
+Next: <a href="#Programmable-Completion" accesskey="n" rel="next">Programmable Completion</a>, Previous: <a href="#Bindable-Readline-Commands" accesskey="p" rel="prev">Bindable Readline Commands</a>, Up: <a href="#Command-Line-Editing" accesskey="u" rel="up">Command Line Editing</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Readline-vi-Mode-1"></span><h3 class="section">8.5 Readline vi Mode</h3>
+
+<p>While the Readline library does not have a full set of <code>vi</code>
+editing functions, it does contain enough to allow simple editing
+of the line.  The Readline <code>vi</code> mode behaves as specified in
+the <small>POSIX</small> standard.
+</p>
+<p>In order to switch interactively between <code>emacs</code> and <code>vi</code>
+editing modes, use the &lsquo;<samp>set -o emacs</samp>&rsquo; and &lsquo;<samp>set -o vi</samp>&rsquo;
+commands (see <a href="#The-Set-Builtin">The Set Builtin</a>).
+The Readline default is <code>emacs</code> mode.
+</p>
+<p>When you enter a line in <code>vi</code> mode, you are already placed in
+&lsquo;insertion&rsquo; mode, as if you had typed an &lsquo;<samp>i</samp>&rsquo;.  Pressing <tt class="key">ESC</tt>
+switches you into &lsquo;command&rsquo; mode, where you can edit the text of the
+line with the standard <code>vi</code> movement keys, move to previous
+history lines with &lsquo;<samp>k</samp>&rsquo; and subsequent lines with &lsquo;<samp>j</samp>&rsquo;, and
+so forth.
+</p>
+<hr>
+<span id="Programmable-Completion"></span><div class="header">
+<p>
+Next: <a href="#Programmable-Completion-Builtins" accesskey="n" rel="next">Programmable Completion Builtins</a>, Previous: <a href="#Readline-vi-Mode" accesskey="p" rel="prev">Readline vi Mode</a>, Up: <a href="#Command-Line-Editing" accesskey="u" rel="up">Command Line Editing</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Programmable-Completion-1"></span><h3 class="section">8.6 Programmable Completion</h3>
+<span id="index-programmable-completion"></span>
+
+<p>When word completion is attempted for an argument to a command for
+which a completion specification (a <var>compspec</var>) has been defined
+using the <code>complete</code> builtin (see <a href="#Programmable-Completion-Builtins">Programmable Completion Builtins</a>),
+the programmable completion facilities are invoked. 
+</p>
+<p>First, the command name is identified.
+If a compspec has been defined for that command, the
+compspec is used to generate the list of possible completions for the word.
+If the command word is the empty string (completion attempted at the
+beginning of an empty line), any compspec defined with
+the <samp>-E</samp> option to <code>complete</code> is used.
+If the command word is a full pathname, a compspec for the full
+pathname is searched for first.
+If no compspec is found for the full pathname, an attempt is made to
+find a compspec for the portion following the final slash.
+If those searches do not result in a compspec, any compspec defined with
+the <samp>-D</samp> option to <code>complete</code> is used as the default.
+If there is no default compspec, Bash attempts alias expansion
+on the command word as a final resort, and attempts to find a compspec
+for the command word from any successful expansion 
+</p>
+<p>Once a compspec has been found, it is used to generate the list of
+matching words.
+If a compspec is not found, the default Bash completion
+described above (see <a href="#Commands-For-Completion">Commands For Completion</a>) is performed.
+</p>
+<p>First, the actions specified by the compspec are used.
+Only matches which are prefixed by the word being completed are
+returned.
+When the <samp>-f</samp> or <samp>-d</samp> option is used for filename or
+directory name completion, the shell variable <code>FIGNORE</code> is
+used to filter the matches.
+See <a href="#Bash-Variables">Bash Variables</a>, for a description of <code>FIGNORE</code>.
+</p>
+<p>Any completions specified by a filename expansion pattern to the
+<samp>-G</samp> option are generated next.
+The words generated by the pattern need not match the word being completed.
+The <code>GLOBIGNORE</code> shell variable is not used to filter the matches,
+but the <code>FIGNORE</code> shell variable is used.
+</p>
+<p>Next, the string specified as the argument to the <samp>-W</samp> option
+is considered.
+The string is first split using the characters in the <code>IFS</code>
+special variable as delimiters.
+Shell quoting is honored within the string, in order to provide a
+mechanism for the words to contain shell metacharacters or characters
+in the value of <code>IFS</code>.
+Each word is then expanded using
+brace expansion, tilde expansion, parameter and variable expansion,
+command substitution, and arithmetic expansion,
+as described above (see <a href="#Shell-Expansions">Shell Expansions</a>).
+The results are split using the rules described above
+(see <a href="#Word-Splitting">Word Splitting</a>).
+The results of the expansion are prefix-matched against the word being
+completed, and the matching words become the possible completions.
+</p>
+<p>After these matches have been generated, any shell function or command
+specified with the <samp>-F</samp> and <samp>-C</samp> options is invoked.
+When the command or function is invoked, the <code>COMP_LINE</code>,
+<code>COMP_POINT</code>, <code>COMP_KEY</code>, and <code>COMP_TYPE</code> variables are
+assigned values as described above (see <a href="#Bash-Variables">Bash Variables</a>).
+If a shell function is being invoked, the <code>COMP_WORDS</code> and
+<code>COMP_CWORD</code> variables are also set.
+When the function or command is invoked, the first argument ($1) is the
+name of the command whose arguments are being completed, the
+second argument ($2) is the word being completed, and the third argument
+($3) is the word preceding the word being completed on the current command
+line.
+No filtering of the generated completions against the word being completed
+is performed; the function or command has complete freedom in generating
+the matches.
+</p>
+<p>Any function specified with <samp>-F</samp> is invoked first.
+The function may use any of the shell facilities, including the
+<code>compgen</code> and <code>compopt</code> builtins described below
+(see <a href="#Programmable-Completion-Builtins">Programmable Completion Builtins</a>), to generate the matches.
+It must put the possible completions in the <code>COMPREPLY</code> array
+variable, one per array element.
+</p>
+<p>Next, any command specified with the <samp>-C</samp> option is invoked
+in an environment equivalent to command substitution.
+It should print a list of completions, one per line, to
+the standard output.
+Backslash may be used to escape a newline, if necessary.
+</p>
+<p>After all of the possible completions are generated, any filter
+specified with the <samp>-X</samp> option is applied to the list.
+The filter is a pattern as used for pathname expansion; a &lsquo;<samp>&amp;</samp>&rsquo;
+in the pattern is replaced with the text of the word being completed.
+A literal &lsquo;<samp>&amp;</samp>&rsquo; may be escaped with a backslash; the backslash
+is removed before attempting a match.
+Any completion that matches the pattern will be removed from the list.
+A leading &lsquo;<samp>!</samp>&rsquo; negates the pattern; in this case any completion
+not matching the pattern will be removed.
+If the <code>nocasematch</code> shell option
+(see the description of <code>shopt</code> in <a href="#The-Shopt-Builtin">The Shopt Builtin</a>)
+is enabled, the match is performed without regard to the case
+of alphabetic characters.
+</p>
+<p>Finally, any prefix and suffix specified with the <samp>-P</samp> and <samp>-S</samp>
+options are added to each member of the completion list, and the result is
+returned to the Readline completion code as the list of possible
+completions.
+</p>
+<p>If the previously-applied actions do not generate any matches, and the
+<samp>-o dirnames</samp> option was supplied to <code>complete</code> when the
+compspec was defined, directory name completion is attempted. 
+</p>
+<p>If the <samp>-o plusdirs</samp> option was supplied to <code>complete</code> when
+the compspec was defined, directory name completion is attempted and any
+matches are added to the results of the other actions.
+</p>
+<p>By default, if a compspec is found, whatever it generates is returned to
+the completion code as the full set of possible completions.
+The default Bash completions are not attempted, and the Readline default
+of filename completion is disabled.
+If the <samp>-o bashdefault</samp> option was supplied to <code>complete</code> when
+the compspec was defined, the default Bash completions are attempted
+if the compspec generates no matches.
+If the <samp>-o default</samp> option was supplied to <code>complete</code> when the
+compspec was defined, Readline&rsquo;s default completion will be performed
+if the compspec (and, if attempted, the default Bash completions)
+generate no matches.
+</p>
+<p>When a compspec indicates that directory name completion is desired,
+the programmable completion functions force Readline to append a slash
+to completed names which are symbolic links to directories, subject to
+the value of the <var>mark-directories</var> Readline variable, regardless
+of the setting of the <var>mark-symlinked-directories</var> Readline variable.
+</p>
+<p>There is some support for dynamically modifying completions.  This is
+most useful when used in combination with a default completion specified
+with <samp>-D</samp>.  It&rsquo;s possible for shell functions executed as completion
+handlers to indicate that completion should be retried by returning an
+exit status of 124.  If a shell function returns 124, and changes
+the compspec associated with the command on which completion is being
+attempted (supplied as the first argument when the function is executed),
+programmable completion restarts from the beginning, with an
+attempt to find a new compspec for that command.  This allows a set of
+completions to be built dynamically as completion is attempted, rather than
+being loaded all at once.
+</p>
+<p>For instance, assuming that there is a library of compspecs, each kept in a
+file corresponding to the name of the command, the following default
+completion function would load completions dynamically:
+</p>
+<div class="example">
+<pre class="example">_completion_loader()
+{
+    . &quot;/etc/bash_completion.d/$1.sh&quot; &gt;/dev/null 2&gt;&amp;1 &amp;&amp; return 124
+}
+complete -D -F _completion_loader -o bashdefault -o default
+</pre></div>
+
+<hr>
+<span id="Programmable-Completion-Builtins"></span><div class="header">
+<p>
+Next: <a href="#A-Programmable-Completion-Example" accesskey="n" rel="next">A Programmable Completion Example</a>, Previous: <a href="#Programmable-Completion" accesskey="p" rel="prev">Programmable Completion</a>, Up: <a href="#Command-Line-Editing" accesskey="u" rel="up">Command Line Editing</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Programmable-Completion-Builtins-1"></span><h3 class="section">8.7 Programmable Completion Builtins</h3>
+<span id="index-completion-builtins"></span>
+
+<p>Three builtin commands are available to manipulate the programmable completion
+facilities: one to specify how the arguments to a particular command are to
+be completed, and two to modify the completion as it is happening.
+</p>
+<dl compact="compact">
+<dt><code>compgen</code></dt>
+<dd><span id="index-compgen"></span>
+<div class="example">
+<pre class="example"><code>compgen [<var>option</var>] [<var>word</var>]</code>
+</pre></div>
+
+<p>Generate possible completion matches for <var>word</var> according to
+the <var>option</var>s, which may be any option accepted by the
+<code>complete</code>
+builtin with the exception of <samp>-p</samp> and <samp>-r</samp>, and write
+the matches to the standard output.
+When using the <samp>-F</samp> or <samp>-C</samp> options, the various shell variables
+set by the programmable completion facilities, while available, will not
+have useful values.
+</p>
+<p>The matches will be generated in the same way as if the programmable
+completion code had generated them directly from a completion specification
+with the same flags.
+If <var>word</var> is specified, only those completions matching <var>word</var>
+will be displayed.
+</p>
+<p>The return value is true unless an invalid option is supplied, or no
+matches were generated.
+</p>
+</dd>
+<dt><code>complete</code></dt>
+<dd><span id="index-complete"></span>
+<div class="example">
+<pre class="example"><code>complete [-abcdefgjksuv] [-o <var>comp-option</var>] [-DEI] [-A <var>action</var>] [-G <var>globpat</var>]
+[-W <var>wordlist</var>] [-F <var>function</var>] [-C <var>command</var>] [-X <var>filterpat</var>]
+[-P <var>prefix</var>] [-S <var>suffix</var>] <var>name</var> [<var>name</var> &hellip;]</code>
+<code>complete -pr [-DEI] [<var>name</var> &hellip;]</code>
+</pre></div>
+
+<p>Specify how arguments to each <var>name</var> should be completed.
+If the <samp>-p</samp> option is supplied, or if no options are supplied, existing
+completion specifications are printed in a way that allows them to be
+reused as input.
+The <samp>-r</samp> option removes a completion specification for
+each <var>name</var>, or, if no <var>name</var>s are supplied, all
+completion specifications.
+The <samp>-D</samp> option indicates that other supplied options and actions should
+apply to the &ldquo;default&rdquo; command completion; that is, completion attempted
+on a command for which no completion has previously been defined.
+The <samp>-E</samp> option indicates that other supplied options and actions should
+apply to &ldquo;empty&rdquo; command completion; that is, completion attempted on a 
+blank line.
+The <samp>-I</samp> option indicates that other supplied options and actions should
+apply to completion on the initial non-assignment word on the line, or after a
+command delimiter such as &lsquo;<samp>;</samp>&rsquo; or &lsquo;<samp>|</samp>&rsquo;, which is usually command
+name completion.
+If multiple options are supplied, the <samp>-D</samp> option takes precedence
+over <samp>-E</samp>, and both take precedence over <samp>-I</samp>.
+If any of <samp>-D</samp>, <samp>-E</samp>, or <samp>-I</samp> are supplied, any other
+<var>name</var> arguments are ignored; these completions only apply to the case
+specified by the option.
+</p>
+<p>The process of applying these completion specifications when word completion
+is attempted is described above (see <a href="#Programmable-Completion">Programmable Completion</a>).
+</p>
+<p>Other options, if specified, have the following meanings.
+The arguments to the <samp>-G</samp>, <samp>-W</samp>, and <samp>-X</samp> options
+(and, if necessary, the <samp>-P</samp> and <samp>-S</samp> options)
+should be quoted to protect them from expansion before the
+<code>complete</code> builtin is invoked.
+</p>
+
+<dl compact="compact">
+<dt><code>-o <var>comp-option</var></code></dt>
+<dd><p>The <var>comp-option</var> controls several aspects of the compspec&rsquo;s behavior
+beyond the simple generation of completions.
+<var>comp-option</var> may be one of: 
+</p>
+<dl compact="compact">
+<dt><code>bashdefault</code></dt>
+<dd><p>Perform the rest of the default Bash completions if the compspec
+generates no matches.
+</p>
+</dd>
+<dt><code>default</code></dt>
+<dd><p>Use Readline&rsquo;s default filename completion if the compspec generates
+no matches.
+</p>
+</dd>
+<dt><code>dirnames</code></dt>
+<dd><p>Perform directory name completion if the compspec generates no matches.
+</p>
+</dd>
+<dt><code>filenames</code></dt>
+<dd><p>Tell Readline that the compspec generates filenames, so it can perform any
+filename-specific processing (like adding a slash to directory names,
+quoting special characters, or suppressing trailing spaces).
+This option is intended to be used with shell functions specified
+with <samp>-F</samp>.
+</p>
+</dd>
+<dt><code>noquote</code></dt>
+<dd><p>Tell Readline not to quote the completed words if they are filenames
+(quoting filenames is the default).
+</p>
+</dd>
+<dt><code>nosort</code></dt>
+<dd><p>Tell Readline not to sort the list of possible completions alphabetically.
+</p>
+</dd>
+<dt><code>nospace</code></dt>
+<dd><p>Tell Readline not to append a space (the default) to words completed at
+the end of the line.
+</p>
+</dd>
+<dt><code>plusdirs</code></dt>
+<dd><p>After any matches defined by the compspec are generated, 
+directory name completion is attempted and any
+matches are added to the results of the other actions.
+</p>
+</dd>
+</dl>
+
+</dd>
+<dt><code>-A <var>action</var></code></dt>
+<dd><p>The <var>action</var> may be one of the following to generate a list of possible
+completions:
+</p>
+<dl compact="compact">
+<dt><code>alias</code></dt>
+<dd><p>Alias names.  May also be specified as <samp>-a</samp>.
+</p>
+</dd>
+<dt><code>arrayvar</code></dt>
+<dd><p>Array variable names.
+</p>
+</dd>
+<dt><code>binding</code></dt>
+<dd><p>Readline key binding names (see <a href="#Bindable-Readline-Commands">Bindable Readline Commands</a>).
+</p>
+</dd>
+<dt><code>builtin</code></dt>
+<dd><p>Names of shell builtin commands.  May also be specified as <samp>-b</samp>.
+</p>
+</dd>
+<dt><code>command</code></dt>
+<dd><p>Command names.  May also be specified as <samp>-c</samp>.
+</p>
+</dd>
+<dt><code>directory</code></dt>
+<dd><p>Directory names.  May also be specified as <samp>-d</samp>.
+</p>
+</dd>
+<dt><code>disabled</code></dt>
+<dd><p>Names of disabled shell builtins.
+</p>
+</dd>
+<dt><code>enabled</code></dt>
+<dd><p>Names of enabled shell builtins.
+</p>
+</dd>
+<dt><code>export</code></dt>
+<dd><p>Names of exported shell variables.  May also be specified as <samp>-e</samp>.
+</p>
+</dd>
+<dt><code>file</code></dt>
+<dd><p>File names.  May also be specified as <samp>-f</samp>.
+</p>
+</dd>
+<dt><code>function</code></dt>
+<dd><p>Names of shell functions.
+</p>
+</dd>
+<dt><code>group</code></dt>
+<dd><p>Group names.  May also be specified as <samp>-g</samp>.
+</p>
+</dd>
+<dt><code>helptopic</code></dt>
+<dd><p>Help topics as accepted by the <code>help</code> builtin (see <a href="#Bash-Builtins">Bash Builtins</a>).
+</p>
+</dd>
+<dt><code>hostname</code></dt>
+<dd><p>Hostnames, as taken from the file specified by the
+<code>HOSTFILE</code> shell variable (see <a href="#Bash-Variables">Bash Variables</a>).
+</p>
+</dd>
+<dt><code>job</code></dt>
+<dd><p>Job names, if job control is active.  May also be specified as <samp>-j</samp>.
+</p>
+</dd>
+<dt><code>keyword</code></dt>
+<dd><p>Shell reserved words.  May also be specified as <samp>-k</samp>.
+</p>
+</dd>
+<dt><code>running</code></dt>
+<dd><p>Names of running jobs, if job control is active.
+</p>
+</dd>
+<dt><code>service</code></dt>
+<dd><p>Service names.  May also be specified as <samp>-s</samp>.
+</p>
+</dd>
+<dt><code>setopt</code></dt>
+<dd><p>Valid arguments for the <samp>-o</samp> option to the <code>set</code> builtin
+(see <a href="#The-Set-Builtin">The Set Builtin</a>).
+</p>
+</dd>
+<dt><code>shopt</code></dt>
+<dd><p>Shell option names as accepted by the <code>shopt</code> builtin
+(see <a href="#Bash-Builtins">Bash Builtins</a>).
+</p>
+</dd>
+<dt><code>signal</code></dt>
+<dd><p>Signal names.
+</p>
+</dd>
+<dt><code>stopped</code></dt>
+<dd><p>Names of stopped jobs, if job control is active.
+</p>
+</dd>
+<dt><code>user</code></dt>
+<dd><p>User names.  May also be specified as <samp>-u</samp>.
+</p>
+</dd>
+<dt><code>variable</code></dt>
+<dd><p>Names of all shell variables.  May also be specified as <samp>-v</samp>.
+</p></dd>
+</dl>
+
+</dd>
+<dt><code>-C <var>command</var></code></dt>
+<dd><p><var>command</var> is executed in a subshell environment, and its output is
+used as the possible completions.
+</p>
+</dd>
+<dt><code>-F <var>function</var></code></dt>
+<dd><p>The shell function <var>function</var> is executed in the current shell
+environment.
+When it is executed, $1 is the name of the command whose arguments are
+being completed, $2 is the word being completed, and $3 is the word
+preceding the word being completed, as described above
+(see <a href="#Programmable-Completion">Programmable Completion</a>).
+When it finishes, the possible completions are retrieved from the value
+of the <code>COMPREPLY</code> array variable.
+</p>
+</dd>
+<dt><code>-G <var>globpat</var></code></dt>
+<dd><p>The filename expansion pattern <var>globpat</var> is expanded to generate
+the possible completions.
+</p>
+</dd>
+<dt><code>-P <var>prefix</var></code></dt>
+<dd><p><var>prefix</var> is added at the beginning of each possible completion
+after all other options have been applied.
+</p>
+</dd>
+<dt><code>-S <var>suffix</var></code></dt>
+<dd><p><var>suffix</var> is appended to each possible completion
+after all other options have been applied.
+</p>
+</dd>
+<dt><code>-W <var>wordlist</var></code></dt>
+<dd><p>The <var>wordlist</var> is split using the characters in the
+<code>IFS</code> special variable as delimiters, and each resultant word
+is expanded.
+The possible completions are the members of the resultant list which
+match the word being completed.
+</p>
+</dd>
+<dt><code>-X <var>filterpat</var></code></dt>
+<dd><p><var>filterpat</var> is a pattern as used for filename expansion.
+It is applied to the list of possible completions generated by the
+preceding options and arguments, and each completion matching
+<var>filterpat</var> is removed from the list.
+A leading &lsquo;<samp>!</samp>&rsquo; in <var>filterpat</var> negates the pattern; in this
+case, any completion not matching <var>filterpat</var> is removed.
+</p></dd>
+</dl>
+
+<p>The return value is true unless an invalid option is supplied, an option
+other than <samp>-p</samp> or <samp>-r</samp> is supplied without a <var>name</var>
+argument, an attempt is made to remove a completion specification for
+a <var>name</var> for which no specification exists, or
+an error occurs adding a completion specification.
+</p>
+</dd>
+<dt><code>compopt</code></dt>
+<dd><span id="index-compopt"></span>
+<div class="example">
+<pre class="example"><code>compopt</code> [-o <var>option</var>] [-DEI] [+o <var>option</var>] [<var>name</var>]
+</pre></div>
+<p>Modify completion options for each <var>name</var> according to the
+<var>option</var>s, or for the currently-executing completion if no <var>name</var>s
+are supplied.
+If no <var>option</var>s are given, display the completion options for each
+<var>name</var> or the current completion.
+The possible values of <var>option</var> are those valid for the <code>complete</code>
+builtin described above.
+The <samp>-D</samp> option indicates that other supplied options should
+apply to the &ldquo;default&rdquo; command completion; that is, completion attempted
+on a command for which no completion has previously been defined.
+The <samp>-E</samp> option indicates that other supplied options should
+apply to &ldquo;empty&rdquo; command completion; that is, completion attempted on a 
+blank line.
+The <samp>-I</samp> option indicates that other supplied options should
+apply to completion on the initial non-assignment word on the line, or after a
+command delimiter such as &lsquo;<samp>;</samp>&rsquo; or &lsquo;<samp>|</samp>&rsquo;, which is usually command
+name completion.
+</p>
+<p>If multiple options are supplied, the <samp>-D</samp> option takes precedence
+over <samp>-E</samp>, and both take precedence over <samp>-I</samp>
+</p>
+<p>The return value is true unless an invalid option is supplied, an attempt
+is made to modify the options for a <var>name</var> for which no completion
+specification exists, or an output error occurs.
+</p>
+</dd>
+</dl>
+
+<hr>
+<span id="A-Programmable-Completion-Example"></span><div class="header">
+<p>
+Previous: <a href="#Programmable-Completion-Builtins" accesskey="p" rel="prev">Programmable Completion Builtins</a>, Up: <a href="#Command-Line-Editing" accesskey="u" rel="up">Command Line Editing</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="A-Programmable-Completion-Example-1"></span><h3 class="section">8.8 A Programmable Completion Example</h3>
+
+<p>The most common way to obtain additional completion functionality beyond
+the default actions <code>complete</code> and <code>compgen</code> provide is to use
+a shell function and bind it to a particular command using <code>complete -F</code>.
+</p>
+<p>The following function provides completions for the <code>cd</code> builtin.
+It is a reasonably good example of what shell functions must do when
+used for completion.  This function uses the word passed as <code>$2</code>
+to determine the directory name to complete.  You can also use the
+<code>COMP_WORDS</code> array variable; the current word is indexed by the
+<code>COMP_CWORD</code> variable.
+</p>
+<p>The function relies on the <code>complete</code> and <code>compgen</code> builtins
+to do much of the work, adding only the things that the Bash <code>cd</code>
+does beyond accepting basic directory names:
+tilde expansion (see <a href="#Tilde-Expansion">Tilde Expansion</a>),
+searching directories in <var>$CDPATH</var>, which is described above
+(see <a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a>),
+and basic support for the <code>cdable_vars</code> shell option
+(see <a href="#The-Shopt-Builtin">The Shopt Builtin</a>).
+<code>_comp_cd</code> modifies the value of <var>IFS</var> so that it contains only
+a newline to accommodate file names containing spaces and tabs &ndash;
+<code>compgen</code> prints the possible completions it generates one per line.
+</p>
+<p>Possible completions go into the <var>COMPREPLY</var> array variable, one
+completion per array element.  The programmable completion system retrieves
+the completions from there when the function returns.
+</p>
+<div class="example">
+<pre class="example"># A completion function for the cd builtin
+# based on the cd completion function from the bash_completion package
+_comp_cd()
+{
+    local IFS=$' \t\n'    # normalize IFS
+    local cur _skipdot _cdpath
+    local i j k
+
+    # Tilde expansion, which also expands tilde to full pathname
+    case &quot;$2&quot; in
+    \~*)    eval cur=&quot;$2&quot; ;;
+    *)      cur=$2 ;;
+    esac
+
+    # no cdpath or absolute pathname -- straight directory completion
+    if [[ -z &quot;${CDPATH:-}&quot; ]] || [[ &quot;$cur&quot; == @(./*|../*|/*) ]]; then
+        # compgen prints paths one per line; could also use while loop
+        IFS=$'\n'
+        COMPREPLY=( $(compgen -d -- &quot;$cur&quot;) )
+        IFS=$' \t\n'
+    # CDPATH+directories in the current directory if not in CDPATH
+    else
+        IFS=$'\n'
+        _skipdot=false
+        # preprocess CDPATH to convert null directory names to .
+        _cdpath=${CDPATH/#:/.:}
+        _cdpath=${_cdpath//::/:.:}
+        _cdpath=${_cdpath/%:/:.}
+        for i in ${_cdpath//:/$'\n'}; do
+            if [[ $i -ef . ]]; then _skipdot=true; fi
+            k=&quot;${#COMPREPLY[@]}&quot;
+            for j in $( compgen -d -- &quot;$i/$cur&quot; ); do
+                COMPREPLY[k++]=${j#$i/}        # cut off directory
+            done
+        done
+        $_skipdot || COMPREPLY+=( $(compgen -d -- &quot;$cur&quot;) )
+        IFS=$' \t\n'
+    fi
+
+    # variable names if appropriate shell option set and no completions
+    if shopt -q cdable_vars &amp;&amp; [[ ${#COMPREPLY[@]} -eq 0 ]]; then
+        COMPREPLY=( $(compgen -v -- &quot;$cur&quot;) )
+    fi
+
+    return 0
+}
+</pre></div>
+
+<p>We install the completion function using the <samp>-F</samp> option to
+<code>complete</code>:
+</p>
+<div class="example">
+<pre class="example"># Tell readline to quote appropriate and append slashes to directories;
+# use the bash default completion for other arguments
+complete -o filenames -o nospace -o bashdefault -F _comp_cd cd
+</pre></div>
+
+<p>Since we&rsquo;d like Bash and Readline to take care of some
+of the other details for us, we use several other options to tell Bash
+and Readline what to do.  The <samp>-o filenames</samp> option tells Readline
+that the possible completions should be treated as filenames, and quoted
+appropriately.  That option will also cause Readline to append a slash to
+filenames it can determine are directories (which is why we might want to
+extend <code>_comp_cd</code> to append a slash if we&rsquo;re using directories found
+via <var>CDPATH</var>: Readline can&rsquo;t tell those completions are directories).
+The <samp>-o nospace</samp> option tells Readline to not append a space
+character to the directory name, in case we want to append to it.
+The <samp>-o bashdefault</samp> option brings in the rest of the &quot;Bash default&quot;
+completions &ndash; possible completion that Bash adds to the default Readline
+set.  These include things like command name completion, variable completion
+for words beginning with &lsquo;<samp>$</samp>&rsquo; or &lsquo;<samp>${</samp>&rsquo;, completions containing pathname
+expansion patterns (see <a href="#Filename-Expansion">Filename Expansion</a>), and so on.
+</p>
+<p>Once installed using <code>complete</code>, <code>_comp_cd</code> will be called every
+time we attempt word completion for a <code>cd</code> command.
+</p>
+<p>Many more examples &ndash; an extensive collection of completions for most of
+the common GNU, Unix, and Linux commands &ndash; are available as part of the
+bash_completion project.  This is installed by default on many GNU/Linux
+distributions.  Originally written by Ian Macdonald, the project now lives
+at <a href="https://github.com/scop/bash-completion/">https://github.com/scop/bash-completion/</a>.  There are ports for
+other systems such as Solaris and Mac OS X.
+</p>
+<p>An older version of the bash_completion package is distributed with bash
+in the <samp>examples/complete</samp> subdirectory.
+</p>
+<span id="index-History_002c-how-to-use"></span>
+
+<hr>
+<span id="Using-History-Interactively"></span><div class="header">
+<p>
+Next: <a href="#Installing-Bash" accesskey="n" rel="next">Installing Bash</a>, Previous: <a href="#Command-Line-Editing" accesskey="p" rel="prev">Command Line Editing</a>, Up: <a href="#Top" accesskey="u" rel="up">Top</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Using-History-Interactively-1"></span><h2 class="chapter">9 Using History Interactively</h2>
+
+
+<p>This chapter describes how to use the <small>GNU</small> History Library
+interactively, from a user&rsquo;s standpoint.
+It should be considered a user&rsquo;s guide.
+For information on using the <small>GNU</small> History Library in other programs,
+see the <small>GNU</small> Readline Library Manual.
+</p>
+<table class="menu" border="0" cellspacing="0">
+<tr><td align="left" valign="top">&bull; <a href="#Bash-History-Facilities" accesskey="1">Bash History Facilities</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How Bash lets you manipulate your command
+				history.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Bash-History-Builtins" accesskey="2">Bash History Builtins</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">The Bash builtin commands that manipulate
+				the command history.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#History-Interaction" accesskey="3">History Interaction</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">What it feels like using History as a user.
+</td></tr>
+</table>
+
+<hr>
+<span id="Bash-History-Facilities"></span><div class="header">
+<p>
+Next: <a href="#Bash-History-Builtins" accesskey="n" rel="next">Bash History Builtins</a>, Up: <a href="#Using-History-Interactively" accesskey="u" rel="up">Using History Interactively</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Bash-History-Facilities-1"></span><h3 class="section">9.1 Bash History Facilities</h3>
+<span id="index-command-history"></span>
+<span id="index-history-list"></span>
+
+<p>When the <samp>-o history</samp> option to the <code>set</code> builtin
+is enabled (see <a href="#The-Set-Builtin">The Set Builtin</a>),
+the shell provides access to the <em>command history</em>,
+the list of commands previously typed.
+The value of the <code>HISTSIZE</code> shell variable is used as the
+number of commands to save in a history list.
+The text of the last <code>$HISTSIZE</code>
+commands (default 500) is saved.
+The shell stores each command in the history list prior to
+parameter and variable expansion
+but after history expansion is performed, subject to the
+values of the shell variables
+<code>HISTIGNORE</code> and <code>HISTCONTROL</code>.
+</p>
+<p>When the shell starts up, the history is initialized from the
+file named by the <code>HISTFILE</code> variable (default <samp>~/.bash_history</samp>).
+The file named by the value of <code>HISTFILE</code> is truncated, if
+necessary, to contain no more than the number of lines specified by
+the value of the <code>HISTFILESIZE</code> variable.
+When a shell with history enabled exits, the last
+<code>$HISTSIZE</code> lines are copied from the history list to the file
+named by <code>$HISTFILE</code>.
+If the <code>histappend</code> shell option is set (see <a href="#Bash-Builtins">Bash Builtins</a>),
+the lines are appended to the history file,
+otherwise the history file is overwritten.
+If <code>HISTFILE</code>
+is unset, or if the history file is unwritable, the history is not saved.
+After saving the history, the history file is truncated
+to contain no more than <code>$HISTFILESIZE</code> lines.
+If <code>HISTFILESIZE</code> is unset, or set to null, a non-numeric value, or
+a numeric value less than zero, the history file is not truncated.
+</p>
+<p>If the <code>HISTTIMEFORMAT</code> is set, the time stamp information
+associated with each history entry is written to the history file,
+marked with the history comment character.
+When the history file is read, lines beginning with the history
+comment character followed immediately by a digit are interpreted
+as timestamps for the following history entry.
+</p>
+<p>The builtin command <code>fc</code> may be used to list or edit and re-execute
+a portion of the history list.
+The <code>history</code> builtin may be used to display or modify the history
+list and manipulate the history file.
+When using command-line editing, search commands
+are available in each editing mode that provide access to the
+history list (see <a href="#Commands-For-History">Commands For History</a>).
+</p>
+<p>The shell allows control over which commands are saved on the history
+list.  The <code>HISTCONTROL</code> and <code>HISTIGNORE</code>
+variables may be set to cause the shell to save only a subset of the
+commands entered.
+The <code>cmdhist</code>
+shell option, if enabled, causes the shell to attempt to save each
+line of a multi-line command in the same history entry, adding
+semicolons where necessary to preserve syntactic correctness.
+The <code>lithist</code>
+shell option causes the shell to save the command with embedded newlines
+instead of semicolons.
+The <code>shopt</code> builtin is used to set these options.
+See <a href="#The-Shopt-Builtin">The Shopt Builtin</a>, for a description of <code>shopt</code>.
+</p>
+<hr>
+<span id="Bash-History-Builtins"></span><div class="header">
+<p>
+Next: <a href="#History-Interaction" accesskey="n" rel="next">History Interaction</a>, Previous: <a href="#Bash-History-Facilities" accesskey="p" rel="prev">Bash History Facilities</a>, Up: <a href="#Using-History-Interactively" accesskey="u" rel="up">Using History Interactively</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Bash-History-Builtins-1"></span><h3 class="section">9.2 Bash History Builtins</h3>
+<span id="index-history-builtins"></span>
+
+<p>Bash provides two builtin commands which manipulate the
+history list and history file.
+</p>
+<dl compact="compact">
+<dt><code>fc</code></dt>
+<dd><span id="index-fc"></span>
+<div class="example">
+<pre class="example"><code>fc [-e <var>ename</var>] [-lnr] [<var>first</var>] [<var>last</var>]</code>
+<code>fc -s [<var>pat</var>=<var>rep</var>] [<var>command</var>]</code>
+</pre></div>
+
+<p>The first form selects a range of commands from <var>first</var> to
+<var>last</var> from the history list and displays or edits and re-executes
+them.
+Both <var>first</var> and
+<var>last</var> may be specified as a string (to locate the most recent
+command beginning with that string) or as a number (an index into the
+history list, where a negative number is used as an offset from the
+current command number).
+</p>
+<p>When listing, a <var>first</var> or <var>last</var> of 0 is equivalent to -1
+and -0 is equivalent to the current command (usually the <code>fc</code>
+command);
+otherwise 0 is equivalent to -1 and -0 is invalid.
+</p>
+<p>If <var>last</var> is not specified, it is set to
+<var>first</var>.  If <var>first</var> is not specified, it is set to the previous
+command for editing and -16 for listing.  If the <samp>-l</samp> flag is
+given, the commands are listed on standard output.  The <samp>-n</samp> flag
+suppresses the command numbers when listing.  The <samp>-r</samp> flag
+reverses the order of the listing.  Otherwise, the editor given by
+<var>ename</var> is invoked on a file containing those commands.  If
+<var>ename</var> is not given, the value of the following variable expansion
+is used: <code>${FCEDIT:-${EDITOR:-vi}}</code>.  This says to use the
+value of the <code>FCEDIT</code> variable if set, or the value of the
+<code>EDITOR</code> variable if that is set, or <code>vi</code> if neither is set.
+When editing is complete, the edited commands are echoed and executed.
+</p>
+<p>In the second form, <var>command</var> is re-executed after each instance
+of <var>pat</var> in the selected command is replaced by <var>rep</var>.
+<var>command</var> is interpreted the same as <var>first</var> above.
+</p>
+<p>A useful alias to use with the <code>fc</code> command is <code>r='fc -s'</code>, so
+that typing &lsquo;<samp>r cc</samp>&rsquo; runs the last command beginning with <code>cc</code>
+and typing &lsquo;<samp>r</samp>&rsquo; re-executes the last command (see <a href="#Aliases">Aliases</a>).
+</p>
+</dd>
+<dt><code>history</code></dt>
+<dd><span id="index-history"></span>
+<div class="example">
+<pre class="example">history [<var>n</var>]
+history -c
+history -d <var>offset</var>
+history -d <var>start</var>-<var>end</var>
+history [-anrw] [<var>filename</var>]
+history -ps <var>arg</var>
+</pre></div>
+
+<p>With no options, display the history list with line numbers.
+Lines prefixed with a &lsquo;<samp>*</samp>&rsquo; have been modified.
+An argument of <var>n</var> lists only the last <var>n</var> lines.
+If the shell variable <code>HISTTIMEFORMAT</code> is set and not null,
+it is used as a format string for <var>strftime</var> to display
+the time stamp associated with each displayed history entry.
+No intervening blank is printed between the formatted time stamp
+and the history line.
+</p>
+<p>Options, if supplied, have the following meanings:
+</p>
+<dl compact="compact">
+<dt><code>-c</code></dt>
+<dd><p>Clear the history list.  This may be combined
+with the other options to replace the history list completely.
+</p>
+</dd>
+<dt><code>-d <var>offset</var></code></dt>
+<dd><p>Delete the history entry at position <var>offset</var>.
+If <var>offset</var> is positive, it should be specified as it appears when
+the history is displayed.
+If <var>offset</var> is negative, it is interpreted as relative to one greater
+than the last history position, so negative indices count back from the
+end of the history, and an index of &lsquo;<samp>-1</samp>&rsquo; refers to the current
+<code>history -d</code> command.
+</p>
+</dd>
+<dt><code>-d <var>start</var>-<var>end</var></code></dt>
+<dd><p>Delete the history entries between positions <var>start</var> and <var>end</var>,
+inclusive.  Positive and negative values for <var>start</var> and <var>end</var>
+are interpreted as described above.
+</p>
+</dd>
+<dt><code>-a</code></dt>
+<dd><p>Append the new history lines to the history file.
+These are history lines entered since the beginning of the current
+Bash session, but not already appended to the history file.
+</p>
+</dd>
+<dt><code>-n</code></dt>
+<dd><p>Append the history lines not already read from the history file
+to the current history list.  These are lines appended to the history
+file since the beginning of the current Bash session.
+</p>
+</dd>
+<dt><code>-r</code></dt>
+<dd><p>Read the history file and append its contents to
+the history list.
+</p>
+</dd>
+<dt><code>-w</code></dt>
+<dd><p>Write out the current history list to the history file.
+</p>
+</dd>
+<dt><code>-p</code></dt>
+<dd><p>Perform history substitution on the <var>arg</var>s and display the result
+on the standard output, without storing the results in the history list.
+</p>
+</dd>
+<dt><code>-s</code></dt>
+<dd><p>The <var>arg</var>s are added to the end of
+the history list as a single entry.
+</p>
+</dd>
+</dl>
+
+<p>When any of the <samp>-w</samp>, <samp>-r</samp>, <samp>-a</samp>, or <samp>-n</samp> options is
+used, if <var>filename</var>
+is given, then it is used as the history file.  If not, then
+the value of the <code>HISTFILE</code> variable is used.
+</p>
+</dd>
+</dl>
+
+<hr>
+<span id="History-Interaction"></span><div class="header">
+<p>
+Previous: <a href="#Bash-History-Builtins" accesskey="p" rel="prev">Bash History Builtins</a>, Up: <a href="#Using-History-Interactively" accesskey="u" rel="up">Using History Interactively</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="History-Expansion"></span><h3 class="section">9.3 History Expansion</h3>
+<span id="index-history-expansion"></span>
+
+<p>The History library provides a history expansion feature that is similar
+to the history expansion provided by <code>csh</code>.  This section
+describes the syntax used to manipulate the history information.
+</p>
+<p>History expansions introduce words from the history list into
+the input stream, making it easy to repeat commands, insert the
+arguments to a previous command into the current input line, or
+fix errors in previous commands quickly.
+</p>
+<p>History expansion is performed immediately after a complete line
+is read, before the shell breaks it into words, and is performed
+on each line individually.  Bash attempts to inform the history
+expansion functions about quoting still in effect from previous lines.
+</p>
+<p>History expansion takes place in two parts.  The first is to determine
+which line from the history list should be used during substitution.
+The second is to select portions of that line for inclusion into the
+current one.  The line selected from the history is called the
+<em>event</em>, and the portions of that line that are acted upon are
+called <em>words</em>.  Various <em>modifiers</em> are available to manipulate
+the selected words.  The line is broken into words in the same fashion
+that Bash does, so that several words
+surrounded by quotes are considered one word.
+History expansions are introduced by the appearance of the
+history expansion character, which is &lsquo;<samp>!</samp>&rsquo; by default.
+</p>
+<p>History expansion implements shell-like quoting conventions:
+a backslash can be used to remove the special handling for the next character;
+single quotes enclose verbatim sequences of characters, and can be used to
+inhibit history expansion;
+and characters enclosed within double quotes may be subject to history
+expansion, since backslash can escape the history expansion character,
+but single quotes may not, since they are not treated specially within
+double quotes.
+</p>
+<p>When using the shell, only &lsquo;<samp>\</samp>&rsquo; and &lsquo;<samp>'</samp>&rsquo; may be used to escape the
+history expansion character, but the history expansion character is
+also treated as quoted if it immediately precedes the closing double quote
+in a double-quoted string. 
+</p>
+<p>Several shell options settable with the <code>shopt</code>
+builtin (see <a href="#The-Shopt-Builtin">The Shopt Builtin</a>) may be used to tailor
+the behavior of history expansion.  If the
+<code>histverify</code> shell option is enabled, and Readline
+is being used, history substitutions are not immediately passed to
+the shell parser.
+Instead, the expanded line is reloaded into the Readline
+editing buffer for further modification.
+If Readline is being used, and the <code>histreedit</code>
+shell option is enabled, a failed history expansion will be
+reloaded into the Readline editing buffer for correction.
+The <samp>-p</samp> option to the <code>history</code> builtin command
+may be used to see what a history expansion will do before using it.
+The <samp>-s</samp> option to the <code>history</code> builtin may be used to
+add commands to the end of the history list without actually executing
+them, so that they are available for subsequent recall.
+This is most useful in conjunction with Readline.
+</p>
+<p>The shell allows control of the various characters used by the
+history expansion mechanism with the <code>histchars</code> variable,
+as explained above (see <a href="#Bash-Variables">Bash Variables</a>).  The shell uses
+the history comment character to mark history timestamps when
+writing the history file.
+</p>
+<table class="menu" border="0" cellspacing="0">
+<tr><td align="left" valign="top">&bull; <a href="#Event-Designators" accesskey="1">Event Designators</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How to specify which history line to use.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Word-Designators" accesskey="2">Word Designators</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Specifying which words are of interest.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Modifiers" accesskey="3">Modifiers</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Modifying the results of substitution.
+</td></tr>
+</table>
+
+<hr>
+<span id="Event-Designators"></span><div class="header">
+<p>
+Next: <a href="#Word-Designators" accesskey="n" rel="next">Word Designators</a>, Up: <a href="#History-Interaction" accesskey="u" rel="up">History Interaction</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Event-Designators-1"></span><h4 class="subsection">9.3.1 Event Designators</h4>
+<span id="index-event-designators"></span>
+
+<p>An event designator is a reference to a command line entry in the
+history list.
+Unless the reference is absolute, events are relative to the current
+position in the history list.
+<span id="index-history-events"></span>
+</p>
+<dl compact="compact">
+<dt><code>!</code></dt>
+<dd><p>Start a history substitution, except when followed by a space, tab,
+the end of the line, &lsquo;<samp>=</samp>&rsquo; or &lsquo;<samp>(</samp>&rsquo; (when the
+<code>extglob</code> shell option is enabled using the <code>shopt</code> builtin).
+</p>
+</dd>
+<dt><code>!<var>n</var></code></dt>
+<dd><p>Refer to command line <var>n</var>.
+</p>
+</dd>
+<dt><code>!-<var>n</var></code></dt>
+<dd><p>Refer to the command <var>n</var> lines back.
+</p>
+</dd>
+<dt><code>!!</code></dt>
+<dd><p>Refer to the previous command.  This is a synonym for &lsquo;<samp>!-1</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>!<var>string</var></code></dt>
+<dd><p>Refer to the most recent command
+preceding the current position in the history list
+starting with <var>string</var>.
+</p>
+</dd>
+<dt><code>!?<var>string</var>[?]</code></dt>
+<dd><p>Refer to the most recent command
+preceding the current position in the history list
+containing <var>string</var>.
+The trailing
+&lsquo;<samp>?</samp>&rsquo; may be omitted if the <var>string</var> is followed immediately by
+a newline.
+If <var>string</var> is missing, the string from the most recent search is used;
+it is an error if there is no previous search string.
+</p>
+</dd>
+<dt><code>^<var>string1</var>^<var>string2</var>^</code></dt>
+<dd><p>Quick Substitution.  Repeat the last command, replacing <var>string1</var>
+with <var>string2</var>.  Equivalent to
+<code>!!:s^<var>string1</var>^<var>string2</var>^</code>.
+</p>
+</dd>
+<dt><code>!#</code></dt>
+<dd><p>The entire command line typed so far.
+</p>
+</dd>
+</dl>
+
+<hr>
+<span id="Word-Designators"></span><div class="header">
+<p>
+Next: <a href="#Modifiers" accesskey="n" rel="next">Modifiers</a>, Previous: <a href="#Event-Designators" accesskey="p" rel="prev">Event Designators</a>, Up: <a href="#History-Interaction" accesskey="u" rel="up">History Interaction</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Word-Designators-1"></span><h4 class="subsection">9.3.2 Word Designators</h4>
+
+<p>Word designators are used to select desired words from the event.
+A &lsquo;<samp>:</samp>&rsquo; separates the event specification from the word designator.  It
+may be omitted if the word designator begins with a &lsquo;<samp>^</samp>&rsquo;, &lsquo;<samp>$</samp>&rsquo;,
+&lsquo;<samp>*</samp>&rsquo;, &lsquo;<samp>-</samp>&rsquo;, or &lsquo;<samp>%</samp>&rsquo;.  Words are numbered from the beginning
+of the line, with the first word being denoted by 0 (zero).  Words are
+inserted into the current line separated by single spaces.
+</p>
+<p>For example,
+</p>
+<dl compact="compact">
+<dt><code>!!</code></dt>
+<dd><p>designates the preceding command.  When you type this, the preceding
+command is repeated in toto.
+</p>
+</dd>
+<dt><code>!!:$</code></dt>
+<dd><p>designates the last argument of the preceding command.  This may be
+shortened to <code>!$</code>.
+</p>
+</dd>
+<dt><code>!fi:2</code></dt>
+<dd><p>designates the second argument of the most recent command starting with
+the letters <code>fi</code>.
+</p></dd>
+</dl>
+
+<p>Here are the word designators:
+</p> 
+<dl compact="compact">
+<dt><code>0 (zero)</code></dt>
+<dd><p>The <code>0</code>th word.  For many applications, this is the command word.
+</p>
+</dd>
+<dt><code><var>n</var></code></dt>
+<dd><p>The <var>n</var>th word.
+</p>
+</dd>
+<dt><code>^</code></dt>
+<dd><p>The first argument; that is, word 1.
+</p>
+</dd>
+<dt><code>$</code></dt>
+<dd><p>The last argument.
+</p>
+</dd>
+<dt><code>%</code></dt>
+<dd><p>The first word matched by the most recent &lsquo;<samp>?<var>string</var>?</samp>&rsquo; search,
+if the search string begins with a character that is part of a word.
+</p>
+</dd>
+<dt><code><var>x</var>-<var>y</var></code></dt>
+<dd><p>A range of words; &lsquo;<samp>-<var>y</var></samp>&rsquo; abbreviates &lsquo;<samp>0-<var>y</var></samp>&rsquo;.
+</p>
+</dd>
+<dt><code>*</code></dt>
+<dd><p>All of the words, except the <code>0</code>th.  This is a synonym for &lsquo;<samp>1-$</samp>&rsquo;.
+It is not an error to use &lsquo;<samp>*</samp>&rsquo; if there is just one word in the event;
+the empty string is returned in that case.
+</p>
+</dd>
+<dt><code><var>x</var>*</code></dt>
+<dd><p>Abbreviates &lsquo;<samp><var>x</var>-$</samp>&rsquo;
+</p>
+</dd>
+<dt><code><var>x</var>-</code></dt>
+<dd><p>Abbreviates &lsquo;<samp><var>x</var>-$</samp>&rsquo; like &lsquo;<samp><var>x</var>*</samp>&rsquo;, but omits the last word.
+If &lsquo;<samp>x</samp>&rsquo; is missing, it defaults to 0.
+</p>
+</dd>
+</dl>
+
+<p>If a word designator is supplied without an event specification, the
+previous command is used as the event.
+</p>
+<hr>
+<span id="Modifiers"></span><div class="header">
+<p>
+Previous: <a href="#Word-Designators" accesskey="p" rel="prev">Word Designators</a>, Up: <a href="#History-Interaction" accesskey="u" rel="up">History Interaction</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Modifiers-1"></span><h4 class="subsection">9.3.3 Modifiers</h4>
+
+<p>After the optional word designator, you can add a sequence of one or more
+of the following modifiers, each preceded by a &lsquo;<samp>:</samp>&rsquo;.
+These modify, or edit, the word or words selected from the history event.
+</p>
+<dl compact="compact">
+<dt><code>h</code></dt>
+<dd><p>Remove a trailing pathname component, leaving only the head.
+</p>
+</dd>
+<dt><code>t</code></dt>
+<dd><p>Remove all leading pathname components, leaving the tail.
+</p>
+</dd>
+<dt><code>r</code></dt>
+<dd><p>Remove a trailing suffix of the form &lsquo;<samp>.<var>suffix</var></samp>&rsquo;, leaving
+the basename.
+</p>
+</dd>
+<dt><code>e</code></dt>
+<dd><p>Remove all but the trailing suffix.
+</p>
+</dd>
+<dt><code>p</code></dt>
+<dd><p>Print the new command but do not execute it.
+</p>
+</dd>
+<dt><code>q</code></dt>
+<dd><p>Quote the substituted words, escaping further substitutions.
+</p>
+</dd>
+<dt><code>x</code></dt>
+<dd><p>Quote the substituted words as with &lsquo;<samp>q</samp>&rsquo;,
+but break into words at spaces, tabs, and newlines.
+The &lsquo;<samp>q</samp>&rsquo; and &lsquo;<samp>x</samp>&rsquo; modifiers are mutually exclusive; the last one
+supplied is used.
+</p>
+</dd>
+<dt><code>s/<var>old</var>/<var>new</var>/</code></dt>
+<dd><p>Substitute <var>new</var> for the first occurrence of <var>old</var> in the
+event line.
+Any character may be used as the delimiter in place of &lsquo;<samp>/</samp>&rsquo;.
+The delimiter may be quoted in <var>old</var> and <var>new</var>
+with a single backslash.  If &lsquo;<samp>&amp;</samp>&rsquo; appears in <var>new</var>,
+it is replaced by <var>old</var>.  A single backslash will quote
+the &lsquo;<samp>&amp;</samp>&rsquo;.
+If <var>old</var> is null, it is set to the last <var>old</var>
+substituted, or, if no previous history substitutions took place,
+the last <var>string</var>
+in a !?<var>string</var><code>[?]</code>
+search.
+If <var>new</var> is is null, each matching <var>old</var> is deleted.
+The final delimiter is optional if it is the last
+character on the input line.
+</p>
+</dd>
+<dt><code>&amp;</code></dt>
+<dd><p>Repeat the previous substitution.
+</p>
+</dd>
+<dt><code>g</code></dt>
+<dt><code>a</code></dt>
+<dd><p>Cause changes to be applied over the entire event line.  Used in
+conjunction with &lsquo;<samp>s</samp>&rsquo;, as in <code>gs/<var>old</var>/<var>new</var>/</code>,
+or with &lsquo;<samp>&amp;</samp>&rsquo;.
+</p>
+</dd>
+<dt><code>G</code></dt>
+<dd><p>Apply the following &lsquo;<samp>s</samp>&rsquo; or &lsquo;<samp>&amp;</samp>&rsquo; modifier once to each word
+in the event.
+</p>
+</dd>
+</dl>
+
+<hr>
+<span id="Installing-Bash"></span><div class="header">
+<p>
+Next: <a href="#Reporting-Bugs" accesskey="n" rel="next">Reporting Bugs</a>, Previous: <a href="#Using-History-Interactively" accesskey="p" rel="prev">Using History Interactively</a>, Up: <a href="#Top" accesskey="u" rel="up">Top</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Installing-Bash-1"></span><h2 class="chapter">10 Installing Bash</h2>
+
+<p>This chapter provides basic instructions for installing Bash on
+the various supported platforms.  The distribution supports the
+<small>GNU</small> operating systems, nearly every version of Unix, and several
+non-Unix systems such as BeOS and Interix.
+Other independent ports exist for
+<small>MS-DOS</small>, <small>OS/2</small>, and Windows platforms.
+</p>
+<table class="menu" border="0" cellspacing="0">
+<tr><td align="left" valign="top">&bull; <a href="#Basic-Installation" accesskey="1">Basic Installation</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Installation instructions.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Compilers-and-Options" accesskey="2">Compilers and Options</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How to set special options for various
+				systems.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Compiling-For-Multiple-Architectures" accesskey="3">Compiling For Multiple Architectures</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How to compile Bash for more
+						than one kind of system from
+						the same source tree.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Installation-Names" accesskey="4">Installation Names</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How to set the various paths used by the installation.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Specifying-the-System-Type" accesskey="5">Specifying the System Type</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How to configure Bash for a particular system.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Sharing-Defaults" accesskey="6">Sharing Defaults</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How to share default configuration values among GNU
+			programs.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Operation-Controls" accesskey="7">Operation Controls</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Options recognized by the configuration program.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Optional-Features" accesskey="8">Optional Features</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">How to enable and disable optional features when
+			building Bash.
+</td></tr>
+</table>
+
+<hr>
+<span id="Basic-Installation"></span><div class="header">
+<p>
+Next: <a href="#Compilers-and-Options" accesskey="n" rel="next">Compilers and Options</a>, Up: <a href="#Installing-Bash" accesskey="u" rel="up">Installing Bash</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Basic-Installation-1"></span><h3 class="section">10.1 Basic Installation</h3>
+<span id="index-installation"></span>
+<span id="index-configuration"></span>
+<span id="index-Bash-installation"></span>
+<span id="index-Bash-configuration"></span>
+
+<p>These are installation instructions for Bash.
+</p>
+<p>The simplest way to compile Bash is:
+</p>
+<ol>
+<li> <code>cd</code> to the directory containing the source code and type
+&lsquo;<samp>./configure</samp>&rsquo; to configure Bash for your system.  If you&rsquo;re
+using <code>csh</code> on an old version of System V, you might need to
+type &lsquo;<samp>sh ./configure</samp>&rsquo; instead to prevent <code>csh</code> from trying
+to execute <code>configure</code> itself.
+
+<p>Running <code>configure</code> takes some time.
+While running, it prints messages telling which features it is
+checking for.
+</p>
+</li><li> Type &lsquo;<samp>make</samp>&rsquo; to compile Bash and build the <code>bashbug</code> bug
+reporting script.
+
+</li><li> Optionally, type &lsquo;<samp>make tests</samp>&rsquo; to run the Bash test suite.
+
+</li><li> Type &lsquo;<samp>make install</samp>&rsquo; to install <code>bash</code> and <code>bashbug</code>.
+This will also install the manual pages and Info file.
+
+</li></ol>
+
+<p>The <code>configure</code> shell script attempts to guess correct
+values for various system-dependent variables used during
+compilation.  It uses those values to create a <samp>Makefile</samp> in
+each directory of the package (the top directory, the
+<samp>builtins</samp>, <samp>doc</samp>, and <samp>support</samp> directories,
+each directory under <samp>lib</samp>, and several others).  It also creates a
+<samp>config.h</samp> file containing system-dependent definitions. 
+Finally, it creates a shell script named <code>config.status</code> that you
+can run in the future to recreate the current configuration, a
+file <samp>config.cache</samp> that saves the results of its tests to
+speed up reconfiguring, and a file <samp>config.log</samp> containing
+compiler output (useful mainly for debugging <code>configure</code>). 
+If at some point
+<samp>config.cache</samp> contains results you don&rsquo;t want to keep, you
+may remove or edit it. 
+</p>
+<p>To find out more about the options and arguments that the
+<code>configure</code> script understands, type 
+</p>
+<div class="example">
+<pre class="example">bash-4.2$ ./configure --help
+</pre></div>
+
+<p>at the Bash prompt in your Bash source directory.
+</p>
+<p>If you want to build Bash in a directory separate from the source
+directory &ndash; to build for multiple architectures, for example &ndash;
+just use the full path to the configure script. The following commands
+will build bash in a directory under <samp>/usr/local/build</samp> from
+the source code in <samp>/usr/local/src/bash-4.4</samp>:
+</p>
+<div class="example">
+<pre class="example">mkdir /usr/local/build/bash-4.4
+cd /usr/local/build/bash-4.4
+bash /usr/local/src/bash-4.4/configure
+make
+</pre></div>
+
+<p>See <a href="#Compiling-For-Multiple-Architectures">Compiling For Multiple Architectures</a> for more information
+about building in a directory separate from the source.
+</p>
+<p>If you need to do unusual things to compile Bash, please
+try to figure out how <code>configure</code> could check whether or not
+to do them, and mail diffs or instructions to
+<a href="mailto:bash-maintainers@gnu.org">bash-maintainers@gnu.org</a> so they can be
+considered for the next release.
+</p>
+<p>The file <samp>configure.ac</samp> is used to create <code>configure</code>
+by a program called Autoconf.  You only need
+<samp>configure.ac</samp> if you want to change it or regenerate
+<code>configure</code> using a newer version of Autoconf.  If
+you do this, make sure you are using Autoconf version 2.50 or
+newer.
+</p>
+<p>You can remove the program binaries and object files from the
+source code directory by typing &lsquo;<samp>make clean</samp>&rsquo;.  To also remove the
+files that <code>configure</code> created (so you can compile Bash for
+a different kind of computer), type &lsquo;<samp>make distclean</samp>&rsquo;.
+</p>
+<hr>
+<span id="Compilers-and-Options"></span><div class="header">
+<p>
+Next: <a href="#Compiling-For-Multiple-Architectures" accesskey="n" rel="next">Compiling For Multiple Architectures</a>, Previous: <a href="#Basic-Installation" accesskey="p" rel="prev">Basic Installation</a>, Up: <a href="#Installing-Bash" accesskey="u" rel="up">Installing Bash</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Compilers-and-Options-1"></span><h3 class="section">10.2 Compilers and Options</h3>
+
+<p>Some systems require unusual options for compilation or linking
+that the <code>configure</code> script does not know about.  You can
+give <code>configure</code> initial values for variables by setting
+them in the environment.  Using a Bourne-compatible shell, you
+can do that on the command line like this:
+</p>
+<div class="example">
+<pre class="example">CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+</pre></div>
+
+<p>On systems that have the <code>env</code> program, you can do it like this:
+</p>
+<div class="example">
+<pre class="example">env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+</pre></div>
+
+<p>The configuration process uses GCC to build Bash if it
+is available.
+</p>
+<hr>
+<span id="Compiling-For-Multiple-Architectures"></span><div class="header">
+<p>
+Next: <a href="#Installation-Names" accesskey="n" rel="next">Installation Names</a>, Previous: <a href="#Compilers-and-Options" accesskey="p" rel="prev">Compilers and Options</a>, Up: <a href="#Installing-Bash" accesskey="u" rel="up">Installing Bash</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Compiling-For-Multiple-Architectures-1"></span><h3 class="section">10.3 Compiling For Multiple Architectures</h3>
+
+<p>You can compile Bash for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of <code>make</code> that
+supports the <code>VPATH</code> variable, such as GNU <code>make</code>.
+<code>cd</code> to the
+directory where you want the object files and executables to go and run
+the <code>configure</code> script from the source directory
+(see <a href="#Basic-Installation">Basic Installation</a>).
+You may need to
+supply the <samp>--srcdir=PATH</samp> argument to tell <code>configure</code> where the
+source files are.  <code>configure</code> automatically checks for the
+source code in the directory that <code>configure</code> is in and in &lsquo;..&rsquo;.
+</p>
+<p>If you have to use a <code>make</code> that does not supports the <code>VPATH</code>
+variable, you can compile Bash for one architecture at a
+time in the source code directory.  After you have installed
+Bash for one architecture, use &lsquo;<samp>make distclean</samp>&rsquo; before
+reconfiguring for another architecture.
+</p>
+<p>Alternatively, if your system supports symbolic links, you can use the
+<samp>support/mkclone</samp> script to create a build tree which has
+symbolic links back to each file in the source directory.  Here&rsquo;s an
+example that creates a build directory in the current directory from a
+source directory <samp>/usr/gnu/src/bash-2.0</samp>:
+</p>
+<div class="example">
+<pre class="example">bash /usr/gnu/src/bash-2.0/support/mkclone -s /usr/gnu/src/bash-2.0 .
+</pre></div>
+
+<p>The <code>mkclone</code> script requires Bash, so you must have already built
+Bash for at least one architecture before you can create build
+directories for other architectures.
+</p>
+<hr>
+<span id="Installation-Names"></span><div class="header">
+<p>
+Next: <a href="#Specifying-the-System-Type" accesskey="n" rel="next">Specifying the System Type</a>, Previous: <a href="#Compiling-For-Multiple-Architectures" accesskey="p" rel="prev">Compiling For Multiple Architectures</a>, Up: <a href="#Installing-Bash" accesskey="u" rel="up">Installing Bash</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Installation-Names-1"></span><h3 class="section">10.4 Installation Names</h3>
+
+<p>By default, &lsquo;<samp>make install</samp>&rsquo; will install into
+<samp>/usr/local/bin</samp>, <samp>/usr/local/man</samp>, etc.  You can
+specify an installation prefix other than <samp>/usr/local</samp> by
+giving <code>configure</code> the option <samp>--prefix=<var>PATH</var></samp>,
+or by specifying a value for the <code>DESTDIR</code> &lsquo;<samp>make</samp>&rsquo;
+variable when running &lsquo;<samp>make install</samp>&rsquo;.
+</p>
+<p>You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. 
+If you give <code>configure</code> the option
+<samp>--exec-prefix=<var>PATH</var></samp>, &lsquo;<samp>make install</samp>&rsquo; will use
+<var>PATH</var> as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix. 
+</p>
+<hr>
+<span id="Specifying-the-System-Type"></span><div class="header">
+<p>
+Next: <a href="#Sharing-Defaults" accesskey="n" rel="next">Sharing Defaults</a>, Previous: <a href="#Installation-Names" accesskey="p" rel="prev">Installation Names</a>, Up: <a href="#Installing-Bash" accesskey="u" rel="up">Installing Bash</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Specifying-the-System-Type-1"></span><h3 class="section">10.5 Specifying the System Type</h3>
+
+<p>There may be some features <code>configure</code> can not figure out
+automatically, but need to determine by the type of host Bash
+will run on.  Usually <code>configure</code> can figure that
+out, but if it prints a message saying it can not guess the host
+type, give it the <samp>--host=TYPE</samp> option.  &lsquo;<samp>TYPE</samp>&rsquo; can
+either be a short name for the system type, such as &lsquo;<samp>sun4</samp>&rsquo;,
+or a canonical name with three fields: &lsquo;<samp>CPU-COMPANY-SYSTEM</samp>&rsquo;
+(e.g., &lsquo;<samp>i386-unknown-freebsd4.2</samp>&rsquo;).
+</p>
+<p>See the file <samp>support/config.sub</samp> for the possible
+values of each field. 
+</p>
+<hr>
+<span id="Sharing-Defaults"></span><div class="header">
+<p>
+Next: <a href="#Operation-Controls" accesskey="n" rel="next">Operation Controls</a>, Previous: <a href="#Specifying-the-System-Type" accesskey="p" rel="prev">Specifying the System Type</a>, Up: <a href="#Installing-Bash" accesskey="u" rel="up">Installing Bash</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Sharing-Defaults-1"></span><h3 class="section">10.6 Sharing Defaults</h3>
+
+<p>If you want to set default values for <code>configure</code> scripts to
+share, you can create a site shell script called
+<code>config.site</code> that gives default values for variables like
+<code>CC</code>, <code>cache_file</code>, and <code>prefix</code>.  <code>configure</code>
+looks for <samp>PREFIX/share/config.site</samp> if it exists, then
+<samp>PREFIX/etc/config.site</samp> if it exists.  Or, you can set the
+<code>CONFIG_SITE</code> environment variable to the location of the site
+script.  A warning: the Bash <code>configure</code> looks for a site script,
+but not all <code>configure</code> scripts do.
+</p>
+<hr>
+<span id="Operation-Controls"></span><div class="header">
+<p>
+Next: <a href="#Optional-Features" accesskey="n" rel="next">Optional Features</a>, Previous: <a href="#Sharing-Defaults" accesskey="p" rel="prev">Sharing Defaults</a>, Up: <a href="#Installing-Bash" accesskey="u" rel="up">Installing Bash</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Operation-Controls-1"></span><h3 class="section">10.7 Operation Controls</h3>
+
+<p><code>configure</code> recognizes the following options to control how it
+operates.
+</p>
+<dl compact="compact">
+<dt><code>--cache-file=<var>file</var></code></dt>
+<dd><p>Use and save the results of the tests in
+<var>file</var> instead of <samp>./config.cache</samp>.  Set <var>file</var> to
+<samp>/dev/null</samp> to disable caching, for debugging
+<code>configure</code>. 
+</p>
+</dd>
+<dt><code>--help</code></dt>
+<dd><p>Print a summary of the options to <code>configure</code>, and exit.
+</p>
+</dd>
+<dt><code>--quiet</code></dt>
+<dt><code>--silent</code></dt>
+<dt><code>-q</code></dt>
+<dd><p>Do not print messages saying which checks are being made.
+</p>
+</dd>
+<dt><code>--srcdir=<var>dir</var></code></dt>
+<dd><p>Look for the Bash source code in directory <var>dir</var>.  Usually
+<code>configure</code> can determine that directory automatically.
+</p>
+</dd>
+<dt><code>--version</code></dt>
+<dd><p>Print the version of Autoconf used to generate the <code>configure</code>
+script, and exit.
+</p></dd>
+</dl>
+
+<p><code>configure</code> also accepts some other, not widely used, boilerplate
+options.  &lsquo;<samp>configure --help</samp>&rsquo; prints the complete list.
+</p>
+<hr>
+<span id="Optional-Features"></span><div class="header">
+<p>
+Previous: <a href="#Operation-Controls" accesskey="p" rel="prev">Operation Controls</a>, Up: <a href="#Installing-Bash" accesskey="u" rel="up">Installing Bash</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Optional-Features-1"></span><h3 class="section">10.8 Optional Features</h3>
+
+<p>The Bash <code>configure</code> has a number of <samp>--enable-<var>feature</var></samp>
+options, where <var>feature</var> indicates an optional part of Bash.
+There are also several <samp>--with-<var>package</var></samp> options,
+where <var>package</var> is something like &lsquo;<samp>bash-malloc</samp>&rsquo; or &lsquo;<samp>purify</samp>&rsquo;.
+To turn off the default use of a package, use
+<samp>--without-<var>package</var></samp>.  To configure Bash without a feature
+that is enabled by default, use <samp>--disable-<var>feature</var></samp>.
+</p>
+<p>Here is a complete list of the <samp>--enable-</samp> and
+<samp>--with-</samp> options that the Bash <code>configure</code> recognizes. 
+</p>
+<dl compact="compact">
+<dt><code>--with-afs</code></dt>
+<dd><p>Define if you are using the Andrew File System from Transarc.
+</p>
+</dd>
+<dt><code>--with-bash-malloc</code></dt>
+<dd><p>Use the Bash version of
+<code>malloc</code> in the directory <samp>lib/malloc</samp>.  This is not the same
+<code>malloc</code> that appears in <small>GNU</small> libc, but an older version
+originally derived from the 4.2 <small>BSD</small> <code>malloc</code>.  This <code>malloc</code>
+is very fast, but wastes some space on each allocation.
+This option is enabled by default.
+The <samp>NOTES</samp> file contains a list of systems for
+which this should be turned off, and <code>configure</code> disables this
+option automatically for a number of systems.
+</p>
+</dd>
+<dt><code>--with-curses</code></dt>
+<dd><p>Use the curses library instead of the termcap library.  This should
+be supplied if your system has an inadequate or incomplete termcap
+database.
+</p>
+</dd>
+<dt><code>--with-gnu-malloc</code></dt>
+<dd><p>A synonym for <code>--with-bash-malloc</code>.
+</p>
+</dd>
+<dt><code>--with-installed-readline[=<var>PREFIX</var>]</code></dt>
+<dd><p>Define this to make Bash link with a locally-installed version of Readline
+rather than the version in <samp>lib/readline</samp>.  This works only with
+Readline 5.0 and later versions.  If <var>PREFIX</var> is <code>yes</code> or not
+supplied, <code>configure</code> uses the values of the make variables
+<code>includedir</code> and <code>libdir</code>, which are subdirectories of <code>prefix</code>
+by default, to find the installed version of Readline if it is not in
+the standard system include and library directories.
+If <var>PREFIX</var> is <code>no</code>, Bash links with the version in
+<samp>lib/readline</samp>.
+If <var>PREFIX</var> is set to any other value, <code>configure</code> treats it as
+a directory pathname and looks for
+the installed version of Readline in subdirectories of that directory
+(include files in <var>PREFIX</var>/<code>include</code> and the library in
+<var>PREFIX</var>/<code>lib</code>).
+</p>
+</dd>
+<dt><code>--with-purify</code></dt>
+<dd><p>Define this to use the Purify memory allocation checker from Rational
+Software.
+</p>
+</dd>
+<dt><code>--enable-minimal-config</code></dt>
+<dd><p>This produces a shell with minimal features, close to the historical
+Bourne shell.
+</p></dd>
+</dl>
+
+<p>There are several <samp>--enable-</samp> options that alter how Bash is
+compiled and linked, rather than changing run-time features.
+</p>
+<dl compact="compact">
+<dt><code>--enable-largefile</code></dt>
+<dd><p>Enable support for <a href="http://www.unix.org/version2/whatsnew/lfs20mar.html">large files</a> if the operating system requires special compiler options
+to build programs which can access large files.  This is enabled by
+default, if the operating system provides large file support.
+</p>
+</dd>
+<dt><code>--enable-profiling</code></dt>
+<dd><p>This builds a Bash binary that produces profiling information to be
+processed by <code>gprof</code> each time it is executed.
+</p>
+</dd>
+<dt><code>--enable-static-link</code></dt>
+<dd><p>This causes Bash to be linked statically, if <code>gcc</code> is being used.
+This could be used to build a version to use as root&rsquo;s shell.
+</p></dd>
+</dl>
+
+<p>The &lsquo;<samp>minimal-config</samp>&rsquo; option can be used to disable all of
+the following options, but it is processed first, so individual
+options may be enabled using &lsquo;<samp>enable-<var>feature</var></samp>&rsquo;. 
+</p>
+<p>All of the following options except for &lsquo;<samp>disabled-builtins</samp>&rsquo;,
+&lsquo;<samp>direxpand-default</samp>&rsquo;, and
+&lsquo;<samp>xpg-echo-default</samp>&rsquo; are
+enabled by default, unless the operating system does not provide the
+necessary support.
+</p>
+<dl compact="compact">
+<dt><code>--enable-alias</code></dt>
+<dd><p>Allow alias expansion and include the <code>alias</code> and <code>unalias</code>
+builtins (see <a href="#Aliases">Aliases</a>).
+</p>
+</dd>
+<dt><code>--enable-arith-for-command</code></dt>
+<dd><p>Include support for the alternate form of the <code>for</code> command
+that behaves like the C language <code>for</code> statement
+(see <a href="#Looping-Constructs">Looping Constructs</a>).
+</p>
+</dd>
+<dt><code>--enable-array-variables</code></dt>
+<dd><p>Include support for one-dimensional array shell variables
+(see <a href="#Arrays">Arrays</a>).
+</p>
+</dd>
+<dt><code>--enable-bang-history</code></dt>
+<dd><p>Include support for <code>csh</code>-like history substitution
+(see <a href="#History-Interaction">History Interaction</a>).
+</p>
+</dd>
+<dt><code>--enable-brace-expansion</code></dt>
+<dd><p>Include <code>csh</code>-like brace expansion
+( <code>b{a,b}c</code> &rarr; <code>bac bbc</code> ).
+See <a href="#Brace-Expansion">Brace Expansion</a>, for a complete description.
+</p>
+</dd>
+<dt><code>--enable-casemod-attributes</code></dt>
+<dd><p>Include support for case-modifying attributes in the <code>declare</code> builtin
+and assignment statements.  Variables with the <var>uppercase</var> attribute,
+for example, will have their values converted to uppercase upon assignment.
+</p>
+</dd>
+<dt><code>--enable-casemod-expansion</code></dt>
+<dd><p>Include support for case-modifying word expansions.
+</p>
+</dd>
+<dt><code>--enable-command-timing</code></dt>
+<dd><p>Include support for recognizing <code>time</code> as a reserved word and for
+displaying timing statistics for the pipeline following <code>time</code>
+(see <a href="#Pipelines">Pipelines</a>).
+This allows pipelines as well as shell builtins and functions to be timed.
+</p>
+</dd>
+<dt><code>--enable-cond-command</code></dt>
+<dd><p>Include support for the <code>[[</code> conditional command.
+(see <a href="#Conditional-Constructs">Conditional Constructs</a>).
+</p>
+</dd>
+<dt><code>--enable-cond-regexp</code></dt>
+<dd><p>Include support for matching <small>POSIX</small> regular expressions using the
+&lsquo;<samp>=~</samp>&rsquo; binary operator in the <code>[[</code> conditional command.
+(see <a href="#Conditional-Constructs">Conditional Constructs</a>).
+</p>
+</dd>
+<dt><code>--enable-coprocesses</code></dt>
+<dd><p>Include support for coprocesses and the <code>coproc</code> reserved word
+(see <a href="#Pipelines">Pipelines</a>).
+</p>
+</dd>
+<dt><code>--enable-debugger</code></dt>
+<dd><p>Include support for the bash debugger (distributed separately).
+</p>
+</dd>
+<dt><code>--enable-dev-fd-stat-broken</code></dt>
+<dd><p>If calling <code>stat</code> on /dev/fd/<var>N</var> returns different results than
+calling <code>fstat</code> on file descriptor <var>N</var>, supply this option to
+enable a workaround.
+This has implications for conditional commands that test file attributes.
+</p>
+</dd>
+<dt><code>--enable-direxpand-default</code></dt>
+<dd><p>Cause the <code>direxpand</code> shell option (see <a href="#The-Shopt-Builtin">The Shopt Builtin</a>)
+to be enabled by default when the shell starts.
+It is normally disabled by default.
+</p>
+</dd>
+<dt><code>--enable-directory-stack</code></dt>
+<dd><p>Include support for a <code>csh</code>-like directory stack and the
+<code>pushd</code>, <code>popd</code>, and <code>dirs</code> builtins
+(see <a href="#The-Directory-Stack">The Directory Stack</a>).
+</p>
+</dd>
+<dt><code>--enable-disabled-builtins</code></dt>
+<dd><p>Allow builtin commands to be invoked via &lsquo;<samp>builtin xxx</samp>&rsquo;
+even after <code>xxx</code> has been disabled using &lsquo;<samp>enable -n xxx</samp>&rsquo;.
+See <a href="#Bash-Builtins">Bash Builtins</a>, for details of the <code>builtin</code> and
+<code>enable</code> builtin commands.
+</p>
+</dd>
+<dt><code>--enable-dparen-arithmetic</code></dt>
+<dd><p>Include support for the <code>((&hellip;))</code> command
+(see <a href="#Conditional-Constructs">Conditional Constructs</a>).
+</p>
+</dd>
+<dt><code>--enable-extended-glob</code></dt>
+<dd><p>Include support for the extended pattern matching features described
+above under <a href="#Pattern-Matching">Pattern Matching</a>.
+</p>
+</dd>
+<dt><code>--enable-extended-glob-default</code></dt>
+<dd><p>Set the default value of the <var>extglob</var> shell option described
+above under <a href="#The-Shopt-Builtin">The Shopt Builtin</a> to be enabled.
+</p>
+</dd>
+<dt><code>--enable-function-import</code></dt>
+<dd><p>Include support for importing function definitions exported by another
+instance of the shell from the environment.  This option is enabled by
+default.
+</p>
+</dd>
+<dt><code>--enable-glob-asciirange-default</code></dt>
+<dd><p>Set the default value of the <var>globasciiranges</var> shell option described
+above under <a href="#The-Shopt-Builtin">The Shopt Builtin</a> to be enabled.
+This controls the behavior of character ranges when used in pattern matching
+bracket expressions.
+</p>
+</dd>
+<dt><code>--enable-help-builtin</code></dt>
+<dd><p>Include the <code>help</code> builtin, which displays help on shell builtins and
+variables (see <a href="#Bash-Builtins">Bash Builtins</a>).
+</p>
+</dd>
+<dt><code>--enable-history</code></dt>
+<dd><p>Include command history and the <code>fc</code> and <code>history</code>
+builtin commands (see <a href="#Bash-History-Facilities">Bash History Facilities</a>).
+</p>
+</dd>
+<dt><code>--enable-job-control</code></dt>
+<dd><p>This enables the job control features (see <a href="#Job-Control">Job Control</a>),
+if the operating system supports them.
+</p>
+</dd>
+<dt><code>--enable-multibyte</code></dt>
+<dd><p>This enables support for multibyte characters if the operating
+system provides the necessary support.
+</p>
+</dd>
+<dt><code>--enable-net-redirections</code></dt>
+<dd><p>This enables the special handling of filenames of the form
+<code>/dev/tcp/<var>host</var>/<var>port</var></code> and
+<code>/dev/udp/<var>host</var>/<var>port</var></code>
+when used in redirections (see <a href="#Redirections">Redirections</a>).
+</p>
+</dd>
+<dt><code>--enable-process-substitution</code></dt>
+<dd><p>This enables process substitution (see <a href="#Process-Substitution">Process Substitution</a>) if
+the operating system provides the necessary support.
+</p>
+</dd>
+<dt><code>--enable-progcomp</code></dt>
+<dd><p>Enable the programmable completion facilities
+(see <a href="#Programmable-Completion">Programmable Completion</a>).
+If Readline is not enabled, this option has no effect.
+</p>
+</dd>
+<dt><code>--enable-prompt-string-decoding</code></dt>
+<dd><p>Turn on the interpretation of a number of backslash-escaped characters
+in the <code>$PS0</code>, <code>$PS1</code>, <code>$PS2</code>, and <code>$PS4</code> prompt
+strings.  See <a href="#Controlling-the-Prompt">Controlling the Prompt</a>, for a complete list of prompt
+string escape sequences.
+</p>
+</dd>
+<dt><code>--enable-readline</code></dt>
+<dd><p>Include support for command-line editing and history with the Bash
+version of the Readline library (see <a href="#Command-Line-Editing">Command Line Editing</a>).
+</p>
+</dd>
+<dt><code>--enable-restricted</code></dt>
+<dd><p>Include support for a <em>restricted shell</em>.  If this is enabled, Bash,
+when called as <code>rbash</code>, enters a restricted mode.  See
+<a href="#The-Restricted-Shell">The Restricted Shell</a>, for a description of restricted mode.
+</p>
+</dd>
+<dt><code>--enable-select</code></dt>
+<dd><p>Include the <code>select</code> compound command, which allows the generation of
+simple menus (see <a href="#Conditional-Constructs">Conditional Constructs</a>).
+</p>
+</dd>
+<dt><code>--enable-separate-helpfiles</code></dt>
+<dd><p>Use external files for the documentation displayed by the <code>help</code> builtin
+instead of storing the text internally.
+</p>
+</dd>
+<dt><code>--enable-single-help-strings</code></dt>
+<dd><p>Store the text displayed by the <code>help</code> builtin as a single string for
+each help topic.  This aids in translating the text to different languages.
+You may need to disable this if your compiler cannot handle very long string
+literals.
+</p>
+</dd>
+<dt><code>--enable-strict-posix-default</code></dt>
+<dd><p>Make Bash <small>POSIX</small>-conformant by default (see <a href="#Bash-POSIX-Mode">Bash POSIX Mode</a>).
+</p>
+</dd>
+<dt><code>--enable-usg-echo-default</code></dt>
+<dd><p>A synonym for <code>--enable-xpg-echo-default</code>.
+</p>
+</dd>
+<dt><code>--enable-xpg-echo-default</code></dt>
+<dd><p>Make the <code>echo</code> builtin expand backslash-escaped characters by default,
+without requiring the <samp>-e</samp> option.
+This sets the default value of the <code>xpg_echo</code> shell option to <code>on</code>,
+which makes the Bash <code>echo</code> behave more like the version specified in
+the Single Unix Specification, version 3.
+See <a href="#Bash-Builtins">Bash Builtins</a>, for a description of the escape sequences that
+<code>echo</code> recognizes.
+</p></dd>
+</dl>
+
+<p>The file <samp>config-top.h</samp> contains C Preprocessor
+&lsquo;<samp>#define</samp>&rsquo; statements for options which are not settable from
+<code>configure</code>.
+Some of these are not meant to be changed; beware of the consequences if
+you do.
+Read the comments associated with each definition for more
+information about its effect.
+</p>
+<hr>
+<span id="Reporting-Bugs"></span><div class="header">
+<p>
+Next: <a href="#Major-Differences-From-The-Bourne-Shell" accesskey="n" rel="next">Major Differences From The Bourne Shell</a>, Previous: <a href="#Installing-Bash" accesskey="p" rel="prev">Installing Bash</a>, Up: <a href="#Top" accesskey="u" rel="up">Top</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Reporting-Bugs-1"></span><h2 class="appendix">Appendix A Reporting Bugs</h2>
+
+<p>Please report all bugs you find in Bash.
+But first, you should
+make sure that it really is a bug, and that it appears in the latest
+version of Bash.
+The latest version of Bash is always available for FTP from
+<a href="ftp://ftp.gnu.org/pub/gnu/bash/">ftp://ftp.gnu.org/pub/gnu/bash/</a>.
+</p>
+<p>Once you have determined that a bug actually exists, use the
+<code>bashbug</code> command to submit a bug report.
+If you have a fix, you are encouraged to mail that as well!
+Suggestions and &lsquo;philosophical&rsquo; bug reports may be mailed
+to <a href="mailto:bug-bash@gnu.org">bug-bash@gnu.org</a> or posted to the Usenet
+newsgroup <code>gnu.bash.bug</code>.
+</p>
+<p>All bug reports should include:
+</p><ul>
+<li> The version number of Bash.
+</li><li> The hardware and operating system.
+</li><li> The compiler used to compile Bash.
+</li><li> A description of the bug behaviour.
+</li><li> A short script or &lsquo;recipe&rsquo; which exercises the bug and may be used
+to reproduce it.
+</li></ul>
+
+<p><code>bashbug</code> inserts the first three items automatically into
+the template it provides for filing a bug report.
+</p>
+<p>Please send all reports concerning this manual to
+<a href="mailto:bug-bash@gnu.org">bug-bash@gnu.org</a>.
+</p>
+<hr>
+<span id="Major-Differences-From-The-Bourne-Shell"></span><div class="header">
+<p>
+Next: <a href="#GNU-Free-Documentation-License" accesskey="n" rel="next">GNU Free Documentation License</a>, Previous: <a href="#Reporting-Bugs" accesskey="p" rel="prev">Reporting Bugs</a>, Up: <a href="#Top" accesskey="u" rel="up">Top</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Major-Differences-From-The-Bourne-Shell-1"></span><h2 class="appendix">Appendix B Major Differences From The Bourne Shell</h2>
+
+<p>Bash implements essentially the same grammar, parameter and
+variable expansion, redirection, and quoting as the Bourne Shell. 
+Bash uses the <small>POSIX</small> standard as the specification of
+how these features are to be implemented.  There are some
+differences between the traditional Bourne shell and Bash; this
+section quickly details the differences of significance.  A
+number of these differences are explained in greater depth in
+previous sections.
+This section uses the version of <code>sh</code> included in SVR4.2 (the
+last version of the historical Bourne shell) as the baseline reference.
+</p>
+<ul>
+<li> Bash is <small>POSIX</small>-conformant, even where the <small>POSIX</small> specification
+differs from traditional <code>sh</code> behavior (see <a href="#Bash-POSIX-Mode">Bash POSIX Mode</a>).
+
+</li><li> Bash has multi-character invocation options (see <a href="#Invoking-Bash">Invoking Bash</a>).
+
+</li><li> Bash has command-line editing (see <a href="#Command-Line-Editing">Command Line Editing</a>) and
+the <code>bind</code> builtin.
+
+</li><li> Bash provides a programmable word completion mechanism
+(see <a href="#Programmable-Completion">Programmable Completion</a>), and builtin commands
+<code>complete</code>, <code>compgen</code>, and <code>compopt</code>, to
+manipulate it.
+
+</li><li> Bash has command history (see <a href="#Bash-History-Facilities">Bash History Facilities</a>) and the
+<code>history</code> and <code>fc</code> builtins to manipulate it.
+The Bash history list maintains timestamp information and uses the
+value of the <code>HISTTIMEFORMAT</code> variable to display it.
+
+</li><li> Bash implements <code>csh</code>-like history expansion
+(see <a href="#History-Interaction">History Interaction</a>).
+
+</li><li> Bash has one-dimensional array variables (see <a href="#Arrays">Arrays</a>), and the
+appropriate variable expansions and assignment syntax to use them.
+Several of the Bash builtins take options to act on arrays.
+Bash provides a number of built-in array variables.
+
+</li><li> The <code>$'&hellip;'</code> quoting syntax, which expands ANSI-C
+backslash-escaped characters in the text between the single quotes,
+is supported (see <a href="#ANSI_002dC-Quoting">ANSI-C Quoting</a>).
+
+</li><li> Bash supports the <code>$&quot;&hellip;&quot;</code> quoting syntax to do
+locale-specific translation of the characters between the double
+quotes.  The <samp>-D</samp>, <samp>--dump-strings</samp>, and <samp>--dump-po-strings</samp>
+invocation options list the translatable strings found in a script
+(see <a href="#Locale-Translation">Locale Translation</a>).
+
+</li><li> Bash implements the <code>!</code> keyword to negate the return value of
+a pipeline (see <a href="#Pipelines">Pipelines</a>).
+Very useful when an <code>if</code> statement needs to act only if a test fails.
+The Bash &lsquo;<samp>-o pipefail</samp>&rsquo; option to <code>set</code> will cause a pipeline to
+return a failure status if any command fails.
+
+</li><li> Bash has the <code>time</code> reserved word and command timing (see <a href="#Pipelines">Pipelines</a>).
+The display of the timing statistics may be controlled with the
+<code>TIMEFORMAT</code> variable.
+
+</li><li> Bash implements the <code>for (( <var>expr1</var> ; <var>expr2</var> ; <var>expr3</var> ))</code>
+arithmetic for command, similar to the C language (see <a href="#Looping-Constructs">Looping Constructs</a>).
+
+</li><li> Bash includes the <code>select</code> compound command, which allows the
+generation of simple menus (see <a href="#Conditional-Constructs">Conditional Constructs</a>).
+
+</li><li> Bash includes the <code>[[</code> compound command, which makes conditional
+testing part of the shell grammar (see <a href="#Conditional-Constructs">Conditional Constructs</a>), including
+optional regular expression matching.
+
+</li><li> Bash provides optional case-insensitive matching for the <code>case</code> and
+<code>[[</code> constructs.
+
+</li><li> Bash includes brace expansion (see <a href="#Brace-Expansion">Brace Expansion</a>) and tilde
+expansion (see <a href="#Tilde-Expansion">Tilde Expansion</a>).
+
+</li><li> Bash implements command aliases and the <code>alias</code> and <code>unalias</code>
+builtins (see <a href="#Aliases">Aliases</a>).
+
+</li><li> Bash provides shell arithmetic, the <code>((</code> compound command
+(see <a href="#Conditional-Constructs">Conditional Constructs</a>),
+and arithmetic expansion (see <a href="#Shell-Arithmetic">Shell Arithmetic</a>).
+
+</li><li> Variables present in the shell&rsquo;s initial environment are automatically
+exported to child processes.  The Bourne shell does not normally do
+this unless the variables are explicitly marked using the <code>export</code>
+command.
+
+</li><li> Bash supports the &lsquo;<samp>+=</samp>&rsquo; assignment operator, which appends to the value
+of the variable named on the left hand side.
+
+</li><li> Bash includes the <small>POSIX</small> pattern removal &lsquo;<samp>%</samp>&rsquo;, &lsquo;<samp>#</samp>&rsquo;, &lsquo;<samp>%%</samp>&rsquo;
+and &lsquo;<samp>##</samp>&rsquo; expansions to remove leading or trailing substrings from
+variable values (see <a href="#Shell-Parameter-Expansion">Shell Parameter Expansion</a>).
+
+</li><li> The expansion <code>${#xx}</code>, which returns the length of <code>${xx}</code>,
+is supported (see <a href="#Shell-Parameter-Expansion">Shell Parameter Expansion</a>).
+
+</li><li> The expansion <code>${var:</code><var>offset</var><code>[:</code><var>length</var><code>]}</code>,
+which expands to the substring of <code>var</code>&rsquo;s value of length
+<var>length</var>, beginning at <var>offset</var>, is present
+(see <a href="#Shell-Parameter-Expansion">Shell Parameter Expansion</a>).
+
+</li><li> The expansion
+<code>${var/[/]</code><var>pattern</var><code>[/</code><var>replacement</var><code>]}</code>,
+which matches <var>pattern</var> and replaces it with <var>replacement</var> in
+the value of <code>var</code>, is available (see <a href="#Shell-Parameter-Expansion">Shell Parameter Expansion</a>).
+
+</li><li> The expansion <code>${!<var>prefix</var>*}</code> expansion, which expands to
+the names of all shell variables whose names begin with <var>prefix</var>,
+is available (see <a href="#Shell-Parameter-Expansion">Shell Parameter Expansion</a>).
+
+</li><li> Bash has <var>indirect</var> variable expansion using <code>${!word}</code>
+(see <a href="#Shell-Parameter-Expansion">Shell Parameter Expansion</a>).
+
+</li><li> Bash can expand positional parameters beyond <code>$9</code> using
+<code>${<var>num</var>}</code>.
+
+</li><li> The <small>POSIX</small> <code>$()</code> form of command substitution
+is implemented (see <a href="#Command-Substitution">Command Substitution</a>),
+and preferred to the Bourne shell&rsquo;s <code>``</code> (which
+is also implemented for backwards compatibility).
+
+</li><li> Bash has process substitution (see <a href="#Process-Substitution">Process Substitution</a>).
+
+</li><li> Bash automatically assigns variables that provide information about the
+current user (<code>UID</code>, <code>EUID</code>, and <code>GROUPS</code>), the current host
+(<code>HOSTTYPE</code>, <code>OSTYPE</code>, <code>MACHTYPE</code>, and <code>HOSTNAME</code>),
+and the instance of Bash that is running (<code>BASH</code>,
+<code>BASH_VERSION</code>, and <code>BASH_VERSINFO</code>).  See <a href="#Bash-Variables">Bash Variables</a>,
+for details.
+
+</li><li> The <code>IFS</code> variable is used to split only the results of expansion,
+not all words (see <a href="#Word-Splitting">Word Splitting</a>).
+This closes a longstanding shell security hole.
+
+</li><li> The filename expansion bracket expression code uses &lsquo;<samp>!</samp>&rsquo; and &lsquo;<samp>^</samp>&rsquo;
+to negate the set of characters between the brackets.
+The Bourne shell uses only &lsquo;<samp>!</samp>&rsquo;.
+
+</li><li> Bash implements the full set of <small>POSIX</small> filename expansion operators,
+including <var>character classes</var>, <var>equivalence classes</var>, and
+<var>collating symbols</var> (see <a href="#Filename-Expansion">Filename Expansion</a>).
+
+</li><li> Bash implements extended pattern matching features when the <code>extglob</code>
+shell option is enabled (see <a href="#Pattern-Matching">Pattern Matching</a>).
+
+</li><li> It is possible to have a variable and a function with the same name;
+<code>sh</code> does not separate the two name spaces.
+
+</li><li> Bash functions are permitted to have local variables using the
+<code>local</code> builtin, and thus useful recursive functions may be written
+(see <a href="#Bash-Builtins">Bash Builtins</a>).
+
+</li><li> Variable assignments preceding commands affect only that command, even
+builtins and functions (see <a href="#Environment">Environment</a>).
+In <code>sh</code>, all variable assignments 
+preceding commands are global unless the command is executed from the
+file system.
+
+</li><li> Bash performs filename expansion on filenames specified as operands
+to input and output redirection operators (see <a href="#Redirections">Redirections</a>).
+
+</li><li> Bash contains the &lsquo;<samp>&lt;&gt;</samp>&rsquo; redirection operator, allowing a file to be
+opened for both reading and writing, and the &lsquo;<samp>&amp;&gt;</samp>&rsquo; redirection
+operator, for directing standard output and standard error to the same
+file (see <a href="#Redirections">Redirections</a>).
+
+</li><li> Bash includes the &lsquo;<samp>&lt;&lt;&lt;</samp>&rsquo; redirection operator, allowing a string to
+be used as the standard input to a command.
+
+</li><li> Bash implements the &lsquo;<samp>[n]&lt;&amp;<var>word</var></samp>&rsquo; and &lsquo;<samp>[n]&gt;&amp;<var>word</var></samp>&rsquo;
+redirection operators, which move one file descriptor to another.
+
+</li><li> Bash treats a number of filenames specially when they are
+used in redirection operators (see <a href="#Redirections">Redirections</a>).
+
+</li><li> Bash can open network connections to arbitrary machines and services
+with the redirection operators (see <a href="#Redirections">Redirections</a>).
+
+</li><li> The <code>noclobber</code> option is available to avoid overwriting existing
+files with output redirection (see <a href="#The-Set-Builtin">The Set Builtin</a>).
+The &lsquo;<samp>&gt;|</samp>&rsquo; redirection operator may be used to override <code>noclobber</code>.
+
+</li><li> The Bash <code>cd</code> and <code>pwd</code> builtins (see <a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a>)
+each take <samp>-L</samp> and <samp>-P</samp> options to switch between logical and
+physical modes.
+
+</li><li> Bash allows a function to override a builtin with the same name, and provides
+access to that builtin&rsquo;s functionality within the function via the
+<code>builtin</code> and <code>command</code> builtins (see <a href="#Bash-Builtins">Bash Builtins</a>).
+
+</li><li> The <code>command</code> builtin allows selective disabling of functions
+when command lookup is performed (see <a href="#Bash-Builtins">Bash Builtins</a>).
+
+</li><li> Individual builtins may be enabled or disabled using the <code>enable</code>
+builtin (see <a href="#Bash-Builtins">Bash Builtins</a>).
+
+</li><li> The Bash <code>exec</code> builtin takes additional options that allow users
+to control the contents of the environment passed to the executed
+command, and what the zeroth argument to the command is to be
+(see <a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a>).
+
+</li><li> Shell functions may be exported to children via the environment
+using <code>export -f</code> (see <a href="#Shell-Functions">Shell Functions</a>).
+
+</li><li> The Bash <code>export</code>, <code>readonly</code>, and <code>declare</code> builtins can
+take a <samp>-f</samp> option to act on shell functions, a <samp>-p</samp> option to
+display variables with various attributes set in a format that can be
+used as shell input, a <samp>-n</samp> option to remove various variable
+attributes, and &lsquo;<samp>name=value</samp>&rsquo; arguments to set variable attributes
+and values simultaneously.
+
+</li><li> The Bash <code>hash</code> builtin allows a name to be associated with
+an arbitrary filename, even when that filename cannot be found by
+searching the <code>$PATH</code>, using &lsquo;<samp>hash -p</samp>&rsquo;
+(see <a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a>).
+
+</li><li> Bash includes a <code>help</code> builtin for quick reference to shell
+facilities (see <a href="#Bash-Builtins">Bash Builtins</a>).
+
+</li><li> The <code>printf</code> builtin is available to display formatted output
+(see <a href="#Bash-Builtins">Bash Builtins</a>).
+
+</li><li> The Bash <code>read</code> builtin (see <a href="#Bash-Builtins">Bash Builtins</a>)
+will read a line ending in &lsquo;<samp>\</samp>&rsquo; with
+the <samp>-r</samp> option, and will use the <code>REPLY</code> variable as a
+default if no non-option arguments are supplied.
+The Bash <code>read</code> builtin
+also accepts a prompt string with the <samp>-p</samp> option and will use
+Readline to obtain the line when given the <samp>-e</samp> option.
+The <code>read</code> builtin also has additional options to control input:
+the <samp>-s</samp> option will turn off echoing of input characters as
+they are read, the <samp>-t</samp> option will allow <code>read</code> to time out
+if input does not arrive within a specified number of seconds, the
+<samp>-n</samp> option will allow reading only a specified number of
+characters rather than a full line, and the <samp>-d</samp> option will read
+until a particular character rather than newline.
+
+</li><li> The <code>return</code> builtin may be used to abort execution of scripts
+executed with the <code>.</code> or <code>source</code> builtins
+(see <a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a>).
+
+</li><li> Bash includes the <code>shopt</code> builtin, for finer control of shell
+optional capabilities (see <a href="#The-Shopt-Builtin">The Shopt Builtin</a>), and allows these options
+to be set and unset at shell invocation (see <a href="#Invoking-Bash">Invoking Bash</a>).
+
+</li><li> Bash has much more optional behavior controllable with the <code>set</code>
+builtin (see <a href="#The-Set-Builtin">The Set Builtin</a>).
+
+</li><li> The &lsquo;<samp>-x</samp>&rsquo; (<samp>xtrace</samp>) option displays commands other than
+simple commands when performing an execution trace
+(see <a href="#The-Set-Builtin">The Set Builtin</a>).
+
+</li><li> The <code>test</code> builtin (see <a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a>)
+is slightly different, as it implements the <small>POSIX</small> algorithm,
+which specifies the behavior based on the number of arguments.
+
+</li><li> Bash includes the <code>caller</code> builtin, which displays the context of
+any active subroutine call (a shell function or a script executed with
+the <code>.</code> or <code>source</code> builtins).  This supports the bash
+debugger.
+
+</li><li> The <code>trap</code> builtin (see <a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a>) allows a
+<code>DEBUG</code> pseudo-signal specification, similar to <code>EXIT</code>.
+Commands specified with a <code>DEBUG</code> trap are executed before every
+simple command, <code>for</code> command, <code>case</code> command,
+<code>select</code> command, every arithmetic <code>for</code> command, and before
+the first command executes in a shell function.
+The <code>DEBUG</code> trap is not inherited by shell functions unless the
+function has been given the <code>trace</code> attribute or the
+<code>functrace</code> option has been enabled using the <code>shopt</code> builtin.
+The <code>extdebug</code> shell option has additional effects on the
+<code>DEBUG</code> trap.
+
+<p>The <code>trap</code> builtin (see <a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a>) allows an
+<code>ERR</code> pseudo-signal specification, similar to <code>EXIT</code> and <code>DEBUG</code>.
+Commands specified with an <code>ERR</code> trap are executed after a simple
+command fails, with a few exceptions.
+The <code>ERR</code> trap is not inherited by shell functions unless the
+<code>-o errtrace</code> option to the <code>set</code> builtin is enabled.
+</p>
+<p>The <code>trap</code> builtin (see <a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a>) allows a
+<code>RETURN</code> pseudo-signal specification, similar to
+<code>EXIT</code> and <code>DEBUG</code>.
+Commands specified with an <code>RETURN</code> trap are executed before
+execution resumes after a shell function or a shell script executed with
+<code>.</code> or <code>source</code> returns.
+The <code>RETURN</code> trap is not inherited by shell functions unless the
+function has been given the <code>trace</code> attribute or the
+<code>functrace</code> option has been enabled using the <code>shopt</code> builtin.
+</p>
+</li><li> The Bash <code>type</code> builtin is more extensive and gives more information
+about the names it finds (see <a href="#Bash-Builtins">Bash Builtins</a>).
+
+</li><li> The Bash <code>umask</code> builtin permits a <samp>-p</samp> option to cause
+the output to be displayed in the form of a <code>umask</code> command
+that may be reused as input (see <a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a>).
+
+</li><li> Bash implements a <code>csh</code>-like directory stack, and provides the
+<code>pushd</code>, <code>popd</code>, and <code>dirs</code> builtins to manipulate it
+(see <a href="#The-Directory-Stack">The Directory Stack</a>).
+Bash also makes the directory stack visible as the value of the
+<code>DIRSTACK</code> shell variable.
+
+</li><li> Bash interprets special backslash-escaped characters in the prompt
+strings when interactive (see <a href="#Controlling-the-Prompt">Controlling the Prompt</a>).
+
+</li><li> The Bash restricted mode is more useful (see <a href="#The-Restricted-Shell">The Restricted Shell</a>);
+the SVR4.2 shell restricted mode is too limited.
+
+</li><li> The <code>disown</code> builtin can remove a job from the internal shell
+job table (see <a href="#Job-Control-Builtins">Job Control Builtins</a>) or suppress the sending
+of <code>SIGHUP</code> to a job when the shell exits as the result of a
+<code>SIGHUP</code>.
+
+</li><li> Bash includes a number of features to support a separate debugger for
+shell scripts.
+
+</li><li> The SVR4.2 shell has two privilege-related builtins
+(<code>mldmode</code> and <code>priv</code>) not present in Bash.
+
+</li><li> Bash does not have the <code>stop</code> or <code>newgrp</code> builtins.
+
+</li><li> Bash does not use the <code>SHACCT</code> variable or perform shell accounting.
+
+</li><li> The SVR4.2 <code>sh</code> uses a <code>TIMEOUT</code> variable like Bash uses
+<code>TMOUT</code>.
+
+</li></ul>
+
+<p>More features unique to Bash may be found in <a href="#Bash-Features">Bash Features</a>.
+</p>
+
+<span id="Implementation-Differences-From-The-SVR4_002e2-Shell"></span><h3 class="appendixsec">B.1 Implementation Differences From The SVR4.2 Shell</h3>
+
+<p>Since Bash is a completely new implementation, it does not suffer from
+many of the limitations of the SVR4.2 shell.  For instance:
+</p>
+<ul>
+<li> Bash does not fork a subshell when redirecting into or out of
+a shell control structure such as  an <code>if</code> or <code>while</code>
+statement.
+
+</li><li> Bash does not allow unbalanced quotes.  The SVR4.2 shell will silently
+insert a needed closing quote at <code>EOF</code> under certain circumstances.
+This can be the cause of some hard-to-find errors.
+
+</li><li> The SVR4.2 shell uses a baroque memory management scheme based on
+trapping <code>SIGSEGV</code>.  If the shell is started from a process with
+<code>SIGSEGV</code> blocked (e.g., by using the <code>system()</code> C library
+function call), it misbehaves badly.
+
+</li><li> In a questionable attempt at security, the SVR4.2 shell,
+when invoked without the <samp>-p</samp> option, will alter its real
+and effective <small>UID</small> and <small>GID</small> if they are less than some
+magic threshold value, commonly 100.
+This can lead to unexpected results.
+
+</li><li> The SVR4.2 shell does not allow users to trap <code>SIGSEGV</code>,
+<code>SIGALRM</code>, or <code>SIGCHLD</code>.
+
+</li><li> The SVR4.2 shell does not allow the <code>IFS</code>, <code>MAILCHECK</code>,
+<code>PATH</code>, <code>PS1</code>, or <code>PS2</code> variables to be unset.
+
+</li><li> The SVR4.2 shell treats &lsquo;<samp>^</samp>&rsquo; as the undocumented equivalent of
+&lsquo;<samp>|</samp>&rsquo;.
+
+</li><li> Bash allows multiple option arguments when it is invoked (<code>-x -v</code>);
+the SVR4.2 shell allows only one option argument (<code>-xv</code>).  In
+fact, some versions of the shell dump core if the second argument begins
+with a &lsquo;<samp>-</samp>&rsquo;.
+
+</li><li> The SVR4.2 shell exits a script if any builtin fails; Bash exits
+a script only if one of the <small>POSIX</small> special builtins fails, and
+only for certain failures, as enumerated in the <small>POSIX</small> standard.
+
+</li><li> The SVR4.2 shell behaves differently when invoked as <code>jsh</code>
+(it turns on job control).
+</li></ul>
+
+<hr>
+<span id="GNU-Free-Documentation-License"></span><div class="header">
+<p>
+Next: <a href="#Indexes" accesskey="n" rel="next">Indexes</a>, Previous: <a href="#Major-Differences-From-The-Bourne-Shell" accesskey="p" rel="prev">Major Differences From The Bourne Shell</a>, Up: <a href="#Top" accesskey="u" rel="up">Top</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="GNU-Free-Documentation-License-1"></span><h2 class="appendix">Appendix C GNU Free Documentation License</h2>
+
+<div align="center">Version 1.3, 3 November 2008
+</div>
+
+<div class="display">
+<pre class="display">Copyright &copy; 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc.
+<a href="http://fsf.org/">http://fsf.org/</a>
+
+Everyone is permitted to copy and distribute verbatim copies
+of this license document, but changing it is not allowed.
+</pre></div>
+
+<ol start="0">
+<li> PREAMBLE
+
+<p>The purpose of this License is to make a manual, textbook, or other
+functional and useful document <em>free</em> in the sense of freedom: to
+assure everyone the effective freedom to copy and redistribute it,
+with or without modifying it, either commercially or noncommercially.
+Secondarily, this License preserves for the author and publisher a way
+to get credit for their work, while not being considered responsible
+for modifications made by others.
+</p>
+<p>This License is a kind of &ldquo;copyleft&rdquo;, which means that derivative
+works of the document must themselves be free in the same sense.  It
+complements the GNU General Public License, which is a copyleft
+license designed for free software.
+</p>
+<p>We have designed this License in order to use it for manuals for free
+software, because free software needs free documentation: a free
+program should come with manuals providing the same freedoms that the
+software does.  But this License is not limited to software manuals;
+it can be used for any textual work, regardless of subject matter or
+whether it is published as a printed book.  We recommend this License
+principally for works whose purpose is instruction or reference.
+</p>
+</li><li> APPLICABILITY AND DEFINITIONS
+
+<p>This License applies to any manual or other work, in any medium, that
+contains a notice placed by the copyright holder saying it can be
+distributed under the terms of this License.  Such a notice grants a
+world-wide, royalty-free license, unlimited in duration, to use that
+work under the conditions stated herein.  The &ldquo;Document&rdquo;, below,
+refers to any such manual or work.  Any member of the public is a
+licensee, and is addressed as &ldquo;you&rdquo;.  You accept the license if you
+copy, modify or distribute the work in a way requiring permission
+under copyright law.
+</p>
+<p>A &ldquo;Modified Version&rdquo; of the Document means any work containing the
+Document or a portion of it, either copied verbatim, or with
+modifications and/or translated into another language.
+</p>
+<p>A &ldquo;Secondary Section&rdquo; is a named appendix or a front-matter section
+of the Document that deals exclusively with the relationship of the
+publishers or authors of the Document to the Document&rsquo;s overall
+subject (or to related matters) and contains nothing that could fall
+directly within that overall subject.  (Thus, if the Document is in
+part a textbook of mathematics, a Secondary Section may not explain
+any mathematics.)  The relationship could be a matter of historical
+connection with the subject or with related matters, or of legal,
+commercial, philosophical, ethical or political position regarding
+them.
+</p>
+<p>The &ldquo;Invariant Sections&rdquo; are certain Secondary Sections whose titles
+are designated, as being those of Invariant Sections, in the notice
+that says that the Document is released under this License.  If a
+section does not fit the above definition of Secondary then it is not
+allowed to be designated as Invariant.  The Document may contain zero
+Invariant Sections.  If the Document does not identify any Invariant
+Sections then there are none.
+</p>
+<p>The &ldquo;Cover Texts&rdquo; are certain short passages of text that are listed,
+as Front-Cover Texts or Back-Cover Texts, in the notice that says that
+the Document is released under this License.  A Front-Cover Text may
+be at most 5 words, and a Back-Cover Text may be at most 25 words.
+</p>
+<p>A &ldquo;Transparent&rdquo; copy of the Document means a machine-readable copy,
+represented in a format whose specification is available to the
+general public, that is suitable for revising the document
+straightforwardly with generic text editors or (for images composed of
+pixels) generic paint programs or (for drawings) some widely available
+drawing editor, and that is suitable for input to text formatters or
+for automatic translation to a variety of formats suitable for input
+to text formatters.  A copy made in an otherwise Transparent file
+format whose markup, or absence of markup, has been arranged to thwart
+or discourage subsequent modification by readers is not Transparent.
+An image format is not Transparent if used for any substantial amount
+of text.  A copy that is not &ldquo;Transparent&rdquo; is called &ldquo;Opaque&rdquo;.
+</p>
+<p>Examples of suitable formats for Transparent copies include plain
+<small>ASCII</small> without markup, Texinfo input format, LaTeX input
+format, <acronym>SGML</acronym> or <acronym>XML</acronym> using a publicly available
+<acronym>DTD</acronym>, and standard-conforming simple <acronym>HTML</acronym>,
+PostScript or <acronym>PDF</acronym> designed for human modification.  Examples
+of transparent image formats include <acronym>PNG</acronym>, <acronym>XCF</acronym> and
+<acronym>JPG</acronym>.  Opaque formats include proprietary formats that can be
+read and edited only by proprietary word processors, <acronym>SGML</acronym> or
+<acronym>XML</acronym> for which the <acronym>DTD</acronym> and/or processing tools are
+not generally available, and the machine-generated <acronym>HTML</acronym>,
+PostScript or <acronym>PDF</acronym> produced by some word processors for
+output purposes only.
+</p>
+<p>The &ldquo;Title Page&rdquo; means, for a printed book, the title page itself,
+plus such following pages as are needed to hold, legibly, the material
+this License requires to appear in the title page.  For works in
+formats which do not have any title page as such, &ldquo;Title Page&rdquo; means
+the text near the most prominent appearance of the work&rsquo;s title,
+preceding the beginning of the body of the text.
+</p>
+<p>The &ldquo;publisher&rdquo; means any person or entity that distributes copies
+of the Document to the public.
+</p>
+<p>A section &ldquo;Entitled XYZ&rdquo; means a named subunit of the Document whose
+title either is precisely XYZ or contains XYZ in parentheses following
+text that translates XYZ in another language.  (Here XYZ stands for a
+specific section name mentioned below, such as &ldquo;Acknowledgements&rdquo;,
+&ldquo;Dedications&rdquo;, &ldquo;Endorsements&rdquo;, or &ldquo;History&rdquo;.)  To &ldquo;Preserve the Title&rdquo;
+of such a section when you modify the Document means that it remains a
+section &ldquo;Entitled XYZ&rdquo; according to this definition.
+</p>
+<p>The Document may include Warranty Disclaimers next to the notice which
+states that this License applies to the Document.  These Warranty
+Disclaimers are considered to be included by reference in this
+License, but only as regards disclaiming warranties: any other
+implication that these Warranty Disclaimers may have is void and has
+no effect on the meaning of this License.
+</p>
+</li><li> VERBATIM COPYING
+
+<p>You may copy and distribute the Document in any medium, either
+commercially or noncommercially, provided that this License, the
+copyright notices, and the license notice saying this License applies
+to the Document are reproduced in all copies, and that you add no other
+conditions whatsoever to those of this License.  You may not use
+technical measures to obstruct or control the reading or further
+copying of the copies you make or distribute.  However, you may accept
+compensation in exchange for copies.  If you distribute a large enough
+number of copies you must also follow the conditions in section 3.
+</p>
+<p>You may also lend copies, under the same conditions stated above, and
+you may publicly display copies.
+</p>
+</li><li> COPYING IN QUANTITY
+
+<p>If you publish printed copies (or copies in media that commonly have
+printed covers) of the Document, numbering more than 100, and the
+Document&rsquo;s license notice requires Cover Texts, you must enclose the
+copies in covers that carry, clearly and legibly, all these Cover
+Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on
+the back cover.  Both covers must also clearly and legibly identify
+you as the publisher of these copies.  The front cover must present
+the full title with all words of the title equally prominent and
+visible.  You may add other material on the covers in addition.
+Copying with changes limited to the covers, as long as they preserve
+the title of the Document and satisfy these conditions, can be treated
+as verbatim copying in other respects.
+</p>
+<p>If the required texts for either cover are too voluminous to fit
+legibly, you should put the first ones listed (as many as fit
+reasonably) on the actual cover, and continue the rest onto adjacent
+pages.
+</p>
+<p>If you publish or distribute Opaque copies of the Document numbering
+more than 100, you must either include a machine-readable Transparent
+copy along with each Opaque copy, or state in or with each Opaque copy
+a computer-network location from which the general network-using
+public has access to download using public-standard network protocols
+a complete Transparent copy of the Document, free of added material.
+If you use the latter option, you must take reasonably prudent steps,
+when you begin distribution of Opaque copies in quantity, to ensure
+that this Transparent copy will remain thus accessible at the stated
+location until at least one year after the last time you distribute an
+Opaque copy (directly or through your agents or retailers) of that
+edition to the public.
+</p>
+<p>It is requested, but not required, that you contact the authors of the
+Document well before redistributing any large number of copies, to give
+them a chance to provide you with an updated version of the Document.
+</p>
+</li><li> MODIFICATIONS
+
+<p>You may copy and distribute a Modified Version of the Document under
+the conditions of sections 2 and 3 above, provided that you release
+the Modified Version under precisely this License, with the Modified
+Version filling the role of the Document, thus licensing distribution
+and modification of the Modified Version to whoever possesses a copy
+of it.  In addition, you must do these things in the Modified Version:
+</p>
+<ol type="A" start="1">
+<li> Use in the Title Page (and on the covers, if any) a title distinct
+from that of the Document, and from those of previous versions
+(which should, if there were any, be listed in the History section
+of the Document).  You may use the same title as a previous version
+if the original publisher of that version gives permission.
+
+</li><li> List on the Title Page, as authors, one or more persons or entities
+responsible for authorship of the modifications in the Modified
+Version, together with at least five of the principal authors of the
+Document (all of its principal authors, if it has fewer than five),
+unless they release you from this requirement.
+
+</li><li> State on the Title page the name of the publisher of the
+Modified Version, as the publisher.
+
+</li><li> Preserve all the copyright notices of the Document.
+
+</li><li> Add an appropriate copyright notice for your modifications
+adjacent to the other copyright notices.
+
+</li><li> Include, immediately after the copyright notices, a license notice
+giving the public permission to use the Modified Version under the
+terms of this License, in the form shown in the Addendum below.
+
+</li><li> Preserve in that license notice the full lists of Invariant Sections
+and required Cover Texts given in the Document&rsquo;s license notice.
+
+</li><li> Include an unaltered copy of this License.
+
+</li><li> Preserve the section Entitled &ldquo;History&rdquo;, Preserve its Title, and add
+to it an item stating at least the title, year, new authors, and
+publisher of the Modified Version as given on the Title Page.  If
+there is no section Entitled &ldquo;History&rdquo; in the Document, create one
+stating the title, year, authors, and publisher of the Document as
+given on its Title Page, then add an item describing the Modified
+Version as stated in the previous sentence.
+
+</li><li> Preserve the network location, if any, given in the Document for
+public access to a Transparent copy of the Document, and likewise
+the network locations given in the Document for previous versions
+it was based on.  These may be placed in the &ldquo;History&rdquo; section.
+You may omit a network location for a work that was published at
+least four years before the Document itself, or if the original
+publisher of the version it refers to gives permission.
+
+</li><li> For any section Entitled &ldquo;Acknowledgements&rdquo; or &ldquo;Dedications&rdquo;, Preserve
+the Title of the section, and preserve in the section all the
+substance and tone of each of the contributor acknowledgements and/or
+dedications given therein.
+
+</li><li> Preserve all the Invariant Sections of the Document,
+unaltered in their text and in their titles.  Section numbers
+or the equivalent are not considered part of the section titles.
+
+</li><li> Delete any section Entitled &ldquo;Endorsements&rdquo;.  Such a section
+may not be included in the Modified Version.
+
+</li><li> Do not retitle any existing section to be Entitled &ldquo;Endorsements&rdquo; or
+to conflict in title with any Invariant Section.
+
+</li><li> Preserve any Warranty Disclaimers.
+</li></ol>
+
+<p>If the Modified Version includes new front-matter sections or
+appendices that qualify as Secondary Sections and contain no material
+copied from the Document, you may at your option designate some or all
+of these sections as invariant.  To do this, add their titles to the
+list of Invariant Sections in the Modified Version&rsquo;s license notice.
+These titles must be distinct from any other section titles.
+</p>
+<p>You may add a section Entitled &ldquo;Endorsements&rdquo;, provided it contains
+nothing but endorsements of your Modified Version by various
+parties&mdash;for example, statements of peer review or that the text has
+been approved by an organization as the authoritative definition of a
+standard.
+</p>
+<p>You may add a passage of up to five words as a Front-Cover Text, and a
+passage of up to 25 words as a Back-Cover Text, to the end of the list
+of Cover Texts in the Modified Version.  Only one passage of
+Front-Cover Text and one of Back-Cover Text may be added by (or
+through arrangements made by) any one entity.  If the Document already
+includes a cover text for the same cover, previously added by you or
+by arrangement made by the same entity you are acting on behalf of,
+you may not add another; but you may replace the old one, on explicit
+permission from the previous publisher that added the old one.
+</p>
+<p>The author(s) and publisher(s) of the Document do not by this License
+give permission to use their names for publicity for or to assert or
+imply endorsement of any Modified Version.
+</p>
+</li><li> COMBINING DOCUMENTS
+
+<p>You may combine the Document with other documents released under this
+License, under the terms defined in section 4 above for modified
+versions, provided that you include in the combination all of the
+Invariant Sections of all of the original documents, unmodified, and
+list them all as Invariant Sections of your combined work in its
+license notice, and that you preserve all their Warranty Disclaimers.
+</p>
+<p>The combined work need only contain one copy of this License, and
+multiple identical Invariant Sections may be replaced with a single
+copy.  If there are multiple Invariant Sections with the same name but
+different contents, make the title of each such section unique by
+adding at the end of it, in parentheses, the name of the original
+author or publisher of that section if known, or else a unique number.
+Make the same adjustment to the section titles in the list of
+Invariant Sections in the license notice of the combined work.
+</p>
+<p>In the combination, you must combine any sections Entitled &ldquo;History&rdquo;
+in the various original documents, forming one section Entitled
+&ldquo;History&rdquo;; likewise combine any sections Entitled &ldquo;Acknowledgements&rdquo;,
+and any sections Entitled &ldquo;Dedications&rdquo;.  You must delete all
+sections Entitled &ldquo;Endorsements.&rdquo;
+</p>
+</li><li> COLLECTIONS OF DOCUMENTS
+
+<p>You may make a collection consisting of the Document and other documents
+released under this License, and replace the individual copies of this
+License in the various documents with a single copy that is included in
+the collection, provided that you follow the rules of this License for
+verbatim copying of each of the documents in all other respects.
+</p>
+<p>You may extract a single document from such a collection, and distribute
+it individually under this License, provided you insert a copy of this
+License into the extracted document, and follow this License in all
+other respects regarding verbatim copying of that document.
+</p>
+</li><li> AGGREGATION WITH INDEPENDENT WORKS
+
+<p>A compilation of the Document or its derivatives with other separate
+and independent documents or works, in or on a volume of a storage or
+distribution medium, is called an &ldquo;aggregate&rdquo; if the copyright
+resulting from the compilation is not used to limit the legal rights
+of the compilation&rsquo;s users beyond what the individual works permit.
+When the Document is included in an aggregate, this License does not
+apply to the other works in the aggregate which are not themselves
+derivative works of the Document.
+</p>
+<p>If the Cover Text requirement of section 3 is applicable to these
+copies of the Document, then if the Document is less than one half of
+the entire aggregate, the Document&rsquo;s Cover Texts may be placed on
+covers that bracket the Document within the aggregate, or the
+electronic equivalent of covers if the Document is in electronic form.
+Otherwise they must appear on printed covers that bracket the whole
+aggregate.
+</p>
+</li><li> TRANSLATION
+
+<p>Translation is considered a kind of modification, so you may
+distribute translations of the Document under the terms of section 4.
+Replacing Invariant Sections with translations requires special
+permission from their copyright holders, but you may include
+translations of some or all Invariant Sections in addition to the
+original versions of these Invariant Sections.  You may include a
+translation of this License, and all the license notices in the
+Document, and any Warranty Disclaimers, provided that you also include
+the original English version of this License and the original versions
+of those notices and disclaimers.  In case of a disagreement between
+the translation and the original version of this License or a notice
+or disclaimer, the original version will prevail.
+</p>
+<p>If a section in the Document is Entitled &ldquo;Acknowledgements&rdquo;,
+&ldquo;Dedications&rdquo;, or &ldquo;History&rdquo;, the requirement (section 4) to Preserve
+its Title (section 1) will typically require changing the actual
+title.
+</p>
+</li><li> TERMINATION
+
+<p>You may not copy, modify, sublicense, or distribute the Document
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense, or distribute it is void, and
+will automatically terminate your rights under this License.
+</p>
+<p>However, if you cease all violation of this License, then your license
+from a particular copyright holder is reinstated (a) provisionally,
+unless and until the copyright holder explicitly and finally
+terminates your license, and (b) permanently, if the copyright holder
+fails to notify you of the violation by some reasonable means prior to
+60 days after the cessation.
+</p>
+<p>Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+</p>
+<p>Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, receipt of a copy of some or all of the same material does
+not give you any rights to use it.
+</p>
+</li><li> FUTURE REVISIONS OF THIS LICENSE
+
+<p>The Free Software Foundation may publish new, revised versions
+of the GNU Free Documentation License from time to time.  Such new
+versions will be similar in spirit to the present version, but may
+differ in detail to address new problems or concerns.  See
+<a href="http://www.gnu.org/copyleft/">http://www.gnu.org/copyleft/</a>.
+</p>
+<p>Each version of the License is given a distinguishing version number.
+If the Document specifies that a particular numbered version of this
+License &ldquo;or any later version&rdquo; applies to it, you have the option of
+following the terms and conditions either of that specified version or
+of any later version that has been published (not as a draft) by the
+Free Software Foundation.  If the Document does not specify a version
+number of this License, you may choose any version ever published (not
+as a draft) by the Free Software Foundation.  If the Document
+specifies that a proxy can decide which future versions of this
+License can be used, that proxy&rsquo;s public statement of acceptance of a
+version permanently authorizes you to choose that version for the
+Document.
+</p>
+</li><li> RELICENSING
+
+<p>&ldquo;Massive Multiauthor Collaboration Site&rdquo; (or &ldquo;MMC Site&rdquo;) means any
+World Wide Web server that publishes copyrightable works and also
+provides prominent facilities for anybody to edit those works.  A
+public wiki that anybody can edit is an example of such a server.  A
+&ldquo;Massive Multiauthor Collaboration&rdquo; (or &ldquo;MMC&rdquo;) contained in the
+site means any set of copyrightable works thus published on the MMC
+site.
+</p>
+<p>&ldquo;CC-BY-SA&rdquo; means the Creative Commons Attribution-Share Alike 3.0
+license published by Creative Commons Corporation, a not-for-profit
+corporation with a principal place of business in San Francisco,
+California, as well as future copyleft versions of that license
+published by that same organization.
+</p>
+<p>&ldquo;Incorporate&rdquo; means to publish or republish a Document, in whole or
+in part, as part of another Document.
+</p>
+<p>An MMC is &ldquo;eligible for relicensing&rdquo; if it is licensed under this
+License, and if all works that were first published under this License
+somewhere other than this MMC, and subsequently incorporated in whole
+or in part into the MMC, (1) had no cover texts or invariant sections,
+and (2) were thus incorporated prior to November 1, 2008.
+</p>
+<p>The operator of an MMC Site may republish an MMC contained in the site
+under CC-BY-SA on the same site at any time before August 1, 2009,
+provided the MMC is eligible for relicensing.
+</p>
+</li></ol>
+
+<span id="ADDENDUM_003a-How-to-use-this-License-for-your-documents"></span><h3 class="heading">ADDENDUM: How to use this License for your documents</h3>
+
+<p>To use this License in a document you have written, include a copy of
+the License in the document and put the following copyright and
+license notices just after the title page:
+</p>
+<div class="example">
+<pre class="example">  Copyright (C)  <var>year</var>  <var>your name</var>.
+  Permission is granted to copy, distribute and/or modify this document
+  under the terms of the GNU Free Documentation License, Version 1.3
+  or any later version published by the Free Software Foundation;
+  with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
+  Texts.  A copy of the license is included in the section entitled ``GNU
+  Free Documentation License''.
+</pre></div>
+
+<p>If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts,
+replace the &ldquo;with&hellip;Texts.&rdquo; line with this:
+</p>
+<div class="example">
+<pre class="example">    with the Invariant Sections being <var>list their titles</var>, with
+    the Front-Cover Texts being <var>list</var>, and with the Back-Cover Texts
+    being <var>list</var>.
+</pre></div>
+
+<p>If you have Invariant Sections without Cover Texts, or some other
+combination of the three, merge those two alternatives to suit the
+situation.
+</p>
+<p>If your document contains nontrivial examples of program code, we
+recommend releasing these examples in parallel under your choice of
+free software license, such as the GNU General Public License,
+to permit their use in free software.
+</p>
+
+
+<hr>
+<span id="Indexes"></span><div class="header">
+<p>
+Previous: <a href="#GNU-Free-Documentation-License" accesskey="p" rel="prev">GNU Free Documentation License</a>, Up: <a href="#Top" accesskey="u" rel="up">Top</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Indexes-1"></span><h2 class="appendix">Appendix D Indexes</h2>
+
+<table class="menu" border="0" cellspacing="0">
+<tr><td align="left" valign="top">&bull; <a href="#Builtin-Index" rel="index" accesskey="1">Builtin Index</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Index of Bash builtin commands.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Reserved-Word-Index" rel="index" accesskey="2">Reserved Word Index</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Index of Bash reserved words.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Variable-Index" rel="index" accesskey="3">Variable Index</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Quick reference helps you find the
+				variable you want.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Function-Index" rel="index" accesskey="4">Function Index</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">Index of bindable Readline functions.
+</td></tr>
+<tr><td align="left" valign="top">&bull; <a href="#Concept-Index" rel="index" accesskey="5">Concept Index</a></td><td>&nbsp;&nbsp;</td><td align="left" valign="top">General index for concepts described in
+				this manual.
+</td></tr>
+</table>
+
+<hr>
+<span id="Builtin-Index"></span><div class="header">
+<p>
+Next: <a href="#Reserved-Word-Index" accesskey="n" rel="next">Reserved Word Index</a>, Up: <a href="#Indexes" accesskey="u" rel="up">Indexes</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Index-of-Shell-Builtin-Commands"></span><h3 class="appendixsec">D.1 Index of Shell Builtin Commands</h3>
+<table><tr><th valign="top">Jump to: &nbsp; </th><td><a class="summary-letter" href="#Builtin-Index_bt_symbol-1"><b>.</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_symbol-2"><b>:</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_symbol-3"><b>[</b></a>
+ &nbsp; 
+<br>
+<a class="summary-letter" href="#Builtin-Index_bt_letter-A"><b>A</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-B"><b>B</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-C"><b>C</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-D"><b>D</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-E"><b>E</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-F"><b>F</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-G"><b>G</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-H"><b>H</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-J"><b>J</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-K"><b>K</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-L"><b>L</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-M"><b>M</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-P"><b>P</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-R"><b>R</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-S"><b>S</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-T"><b>T</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-U"><b>U</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-W"><b>W</b></a>
+ &nbsp; 
+</td></tr></table>
+<table class="index-bt" border="0">
+<tr><td></td><th align="left">Index Entry</th><td>&nbsp;</td><th align="left"> Section</th></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Builtin-Index_bt_symbol-1">.</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-_002e"><code>.</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Builtin-Index_bt_symbol-2">:</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-_003a"><code>:</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Builtin-Index_bt_symbol-3">[</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-_005b"><code>[</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Builtin-Index_bt_letter-A">A</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-alias"><code>alias</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Builtins">Bash Builtins</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Builtin-Index_bt_letter-B">B</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-bg"><code>bg</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Job-Control-Builtins">Job Control Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-bind"><code>bind</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Builtins">Bash Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-break"><code>break</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-builtin"><code>builtin</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Builtins">Bash Builtins</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Builtin-Index_bt_letter-C">C</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-caller"><code>caller</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Builtins">Bash Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-cd"><code>cd</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-command"><code>command</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Builtins">Bash Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-compgen"><code>compgen</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Programmable-Completion-Builtins">Programmable Completion Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-complete"><code>complete</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Programmable-Completion-Builtins">Programmable Completion Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-compopt"><code>compopt</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Programmable-Completion-Builtins">Programmable Completion Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-continue"><code>continue</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Builtin-Index_bt_letter-D">D</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-declare"><code>declare</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Builtins">Bash Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-dirs"><code>dirs</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Directory-Stack-Builtins">Directory Stack Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-disown"><code>disown</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Job-Control-Builtins">Job Control Builtins</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Builtin-Index_bt_letter-E">E</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-echo"><code>echo</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Builtins">Bash Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-enable"><code>enable</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Builtins">Bash Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-eval"><code>eval</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-exec"><code>exec</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-exit"><code>exit</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-export"><code>export</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Builtin-Index_bt_letter-F">F</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-fc"><code>fc</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-History-Builtins">Bash History Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-fg"><code>fg</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Job-Control-Builtins">Job Control Builtins</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Builtin-Index_bt_letter-G">G</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-getopts"><code>getopts</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Builtin-Index_bt_letter-H">H</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-hash"><code>hash</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-help"><code>help</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Builtins">Bash Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-history"><code>history</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-History-Builtins">Bash History Builtins</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Builtin-Index_bt_letter-J">J</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-jobs"><code>jobs</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Job-Control-Builtins">Job Control Builtins</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Builtin-Index_bt_letter-K">K</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-kill"><code>kill</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Job-Control-Builtins">Job Control Builtins</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Builtin-Index_bt_letter-L">L</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-let"><code>let</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Builtins">Bash Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-local"><code>local</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Builtins">Bash Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-logout"><code>logout</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Builtins">Bash Builtins</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Builtin-Index_bt_letter-M">M</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-mapfile"><code>mapfile</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Builtins">Bash Builtins</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Builtin-Index_bt_letter-P">P</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-popd"><code>popd</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Directory-Stack-Builtins">Directory Stack Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-printf"><code>printf</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Builtins">Bash Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-pushd"><code>pushd</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Directory-Stack-Builtins">Directory Stack Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-pwd"><code>pwd</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Builtin-Index_bt_letter-R">R</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-read"><code>read</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Builtins">Bash Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-readarray"><code>readarray</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Builtins">Bash Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-readonly"><code>readonly</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-return"><code>return</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Builtin-Index_bt_letter-S">S</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-set"><code>set</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#The-Set-Builtin">The Set Builtin</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-shift"><code>shift</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-shopt"><code>shopt</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#The-Shopt-Builtin">The Shopt Builtin</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-source"><code>source</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Builtins">Bash Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-suspend"><code>suspend</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Job-Control-Builtins">Job Control Builtins</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Builtin-Index_bt_letter-T">T</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-test"><code>test</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-times"><code>times</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-trap"><code>trap</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-type"><code>type</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Builtins">Bash Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-typeset"><code>typeset</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Builtins">Bash Builtins</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Builtin-Index_bt_letter-U">U</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-ulimit"><code>ulimit</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Builtins">Bash Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-umask"><code>umask</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-unalias"><code>unalias</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Builtins">Bash Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-unset"><code>unset</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Builtins">Bourne Shell Builtins</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Builtin-Index_bt_letter-W">W</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-wait"><code>wait</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Job-Control-Builtins">Job Control Builtins</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+</table>
+<table><tr><th valign="top">Jump to: &nbsp; </th><td><a class="summary-letter" href="#Builtin-Index_bt_symbol-1"><b>.</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_symbol-2"><b>:</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_symbol-3"><b>[</b></a>
+ &nbsp; 
+<br>
+<a class="summary-letter" href="#Builtin-Index_bt_letter-A"><b>A</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-B"><b>B</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-C"><b>C</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-D"><b>D</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-E"><b>E</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-F"><b>F</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-G"><b>G</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-H"><b>H</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-J"><b>J</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-K"><b>K</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-L"><b>L</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-M"><b>M</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-P"><b>P</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-R"><b>R</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-S"><b>S</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-T"><b>T</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-U"><b>U</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Builtin-Index_bt_letter-W"><b>W</b></a>
+ &nbsp; 
+</td></tr></table>
+
+<hr>
+<span id="Reserved-Word-Index"></span><div class="header">
+<p>
+Next: <a href="#Variable-Index" accesskey="n" rel="next">Variable Index</a>, Previous: <a href="#Builtin-Index" accesskey="p" rel="prev">Builtin Index</a>, Up: <a href="#Indexes" accesskey="u" rel="up">Indexes</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Index-of-Shell-Reserved-Words"></span><h3 class="appendixsec">D.2 Index of Shell Reserved Words</h3>
+<table><tr><th valign="top">Jump to: &nbsp; </th><td><a class="summary-letter" href="#Reserved-Word-Index_rw_symbol-1"><b>!</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Reserved-Word-Index_rw_symbol-2"><b>[</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Reserved-Word-Index_rw_symbol-3"><b>]</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Reserved-Word-Index_rw_symbol-4"><b>{</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Reserved-Word-Index_rw_symbol-5"><b>}</b></a>
+ &nbsp; 
+<br>
+<a class="summary-letter" href="#Reserved-Word-Index_rw_letter-C"><b>C</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Reserved-Word-Index_rw_letter-D"><b>D</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Reserved-Word-Index_rw_letter-E"><b>E</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Reserved-Word-Index_rw_letter-F"><b>F</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Reserved-Word-Index_rw_letter-I"><b>I</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Reserved-Word-Index_rw_letter-S"><b>S</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Reserved-Word-Index_rw_letter-T"><b>T</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Reserved-Word-Index_rw_letter-U"><b>U</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Reserved-Word-Index_rw_letter-W"><b>W</b></a>
+ &nbsp; 
+</td></tr></table>
+<table class="index-rw" border="0">
+<tr><td></td><th align="left">Index Entry</th><td>&nbsp;</td><th align="left"> Section</th></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Reserved-Word-Index_rw_symbol-1">!</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-_0021"><code>!</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Pipelines">Pipelines</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Reserved-Word-Index_rw_symbol-2">[</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-_005b_005b"><code>[[</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Conditional-Constructs">Conditional Constructs</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Reserved-Word-Index_rw_symbol-3">]</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-_005d_005d"><code>]]</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Conditional-Constructs">Conditional Constructs</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Reserved-Word-Index_rw_symbol-4">{</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-_007b"><code>{</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Command-Grouping">Command Grouping</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Reserved-Word-Index_rw_symbol-5">}</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-_007d"><code>}</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Command-Grouping">Command Grouping</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Reserved-Word-Index_rw_letter-C">C</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-case"><code>case</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Conditional-Constructs">Conditional Constructs</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Reserved-Word-Index_rw_letter-D">D</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-do"><code>do</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Looping-Constructs">Looping Constructs</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-done"><code>done</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Looping-Constructs">Looping Constructs</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Reserved-Word-Index_rw_letter-E">E</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-elif"><code>elif</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Conditional-Constructs">Conditional Constructs</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-else"><code>else</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Conditional-Constructs">Conditional Constructs</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-esac"><code>esac</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Conditional-Constructs">Conditional Constructs</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Reserved-Word-Index_rw_letter-F">F</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-fi"><code>fi</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Conditional-Constructs">Conditional Constructs</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-for"><code>for</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Looping-Constructs">Looping Constructs</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-function"><code>function</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Shell-Functions">Shell Functions</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Reserved-Word-Index_rw_letter-I">I</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-if"><code>if</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Conditional-Constructs">Conditional Constructs</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-in"><code>in</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Conditional-Constructs">Conditional Constructs</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Reserved-Word-Index_rw_letter-S">S</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-select"><code>select</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Conditional-Constructs">Conditional Constructs</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Reserved-Word-Index_rw_letter-T">T</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-then"><code>then</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Conditional-Constructs">Conditional Constructs</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-time"><code>time</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Pipelines">Pipelines</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Reserved-Word-Index_rw_letter-U">U</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-until"><code>until</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Looping-Constructs">Looping Constructs</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Reserved-Word-Index_rw_letter-W">W</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-while"><code>while</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Looping-Constructs">Looping Constructs</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+</table>
+<table><tr><th valign="top">Jump to: &nbsp; </th><td><a class="summary-letter" href="#Reserved-Word-Index_rw_symbol-1"><b>!</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Reserved-Word-Index_rw_symbol-2"><b>[</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Reserved-Word-Index_rw_symbol-3"><b>]</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Reserved-Word-Index_rw_symbol-4"><b>{</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Reserved-Word-Index_rw_symbol-5"><b>}</b></a>
+ &nbsp; 
+<br>
+<a class="summary-letter" href="#Reserved-Word-Index_rw_letter-C"><b>C</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Reserved-Word-Index_rw_letter-D"><b>D</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Reserved-Word-Index_rw_letter-E"><b>E</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Reserved-Word-Index_rw_letter-F"><b>F</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Reserved-Word-Index_rw_letter-I"><b>I</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Reserved-Word-Index_rw_letter-S"><b>S</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Reserved-Word-Index_rw_letter-T"><b>T</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Reserved-Word-Index_rw_letter-U"><b>U</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Reserved-Word-Index_rw_letter-W"><b>W</b></a>
+ &nbsp; 
+</td></tr></table>
+
+<hr>
+<span id="Variable-Index"></span><div class="header">
+<p>
+Next: <a href="#Function-Index" accesskey="n" rel="next">Function Index</a>, Previous: <a href="#Reserved-Word-Index" accesskey="p" rel="prev">Reserved Word Index</a>, Up: <a href="#Indexes" accesskey="u" rel="up">Indexes</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Parameter-and-Variable-Index"></span><h3 class="appendixsec">D.3 Parameter and Variable Index</h3>
+<table><tr><th valign="top">Jump to: &nbsp; </th><td><a class="summary-letter" href="#Variable-Index_vr_symbol-1"><b>!</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_symbol-2"><b>#</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_symbol-3"><b>$</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_symbol-4"><b>*</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_symbol-5"><b>-</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_symbol-6"><b>0</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_symbol-7"><b>?</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_symbol-8"><b>@</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_symbol-9"><b>_</b></a>
+ &nbsp; 
+<br>
+<a class="summary-letter" href="#Variable-Index_vr_letter-A"><b>A</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-B"><b>B</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-C"><b>C</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-D"><b>D</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-E"><b>E</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-F"><b>F</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-G"><b>G</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-H"><b>H</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-I"><b>I</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-K"><b>K</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-L"><b>L</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-M"><b>M</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-O"><b>O</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-P"><b>P</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-R"><b>R</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-S"><b>S</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-T"><b>T</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-U"><b>U</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-V"><b>V</b></a>
+ &nbsp; 
+</td></tr></table>
+<table class="index-vr" border="0">
+<tr><td></td><th align="left">Index Entry</th><td>&nbsp;</td><th align="left"> Section</th></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Variable-Index_vr_symbol-1">!</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-_0021-1"><code>!</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Special-Parameters">Special Parameters</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Variable-Index_vr_symbol-2">#</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-_0023"><code>#</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Special-Parameters">Special Parameters</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Variable-Index_vr_symbol-3">$</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-_0024"><code>$</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Special-Parameters">Special Parameters</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-_0024_0021"><code>$!</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Special-Parameters">Special Parameters</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-_0024_0023"><code>$#</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Special-Parameters">Special Parameters</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-_0024_0024"><code>$$</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Special-Parameters">Special Parameters</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-_0024_002a"><code>$*</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Special-Parameters">Special Parameters</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-_0024_002d"><code>$-</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Special-Parameters">Special Parameters</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-_00240"><code>$0</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Special-Parameters">Special Parameters</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-_0024_003f"><code>$?</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Special-Parameters">Special Parameters</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-_0024_0040"><code>$@</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Special-Parameters">Special Parameters</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-_0024_005f"><code>$_</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Variable-Index_vr_symbol-4">*</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-_002a"><code>*</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Special-Parameters">Special Parameters</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Variable-Index_vr_symbol-5">-</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-_002d"><code>-</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Special-Parameters">Special Parameters</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Variable-Index_vr_symbol-6">0</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-0"><code>0</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Special-Parameters">Special Parameters</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Variable-Index_vr_symbol-7">?</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-_003f"><code>?</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Special-Parameters">Special Parameters</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Variable-Index_vr_symbol-8">@</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-_0040"><code>@</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Special-Parameters">Special Parameters</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Variable-Index_vr_symbol-9">_</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-_005f"><code>_</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Variable-Index_vr_letter-A">A</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-auto_005fresume"><code>auto_resume</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Job-Control-Variables">Job Control Variables</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Variable-Index_vr_letter-B">B</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-BASH"><code>BASH</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-BASHOPTS"><code>BASHOPTS</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-BASHPID"><code>BASHPID</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-BASH_005fALIASES"><code>BASH_ALIASES</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-BASH_005fARGC"><code>BASH_ARGC</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-BASH_005fARGV"><code>BASH_ARGV</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-BASH_005fARGV0"><code>BASH_ARGV0</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-BASH_005fCMDS"><code>BASH_CMDS</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-BASH_005fCOMMAND"><code>BASH_COMMAND</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-BASH_005fCOMPAT"><code>BASH_COMPAT</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-BASH_005fENV"><code>BASH_ENV</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-BASH_005fEXECUTION_005fSTRING"><code>BASH_EXECUTION_STRING</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-BASH_005fLINENO"><code>BASH_LINENO</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-BASH_005fLOADABLES_005fPATH"><code>BASH_LOADABLES_PATH</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-BASH_005fREMATCH"><code>BASH_REMATCH</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-BASH_005fSOURCE"><code>BASH_SOURCE</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-BASH_005fSUBSHELL"><code>BASH_SUBSHELL</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-BASH_005fVERSINFO"><code>BASH_VERSINFO</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-BASH_005fVERSION"><code>BASH_VERSION</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-BASH_005fXTRACEFD"><code>BASH_XTRACEFD</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-bell_002dstyle"><code>bell-style</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-bind_002dtty_002dspecial_002dchars"><code>bind-tty-special-chars</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-blink_002dmatching_002dparen"><code>blink-matching-paren</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Variable-Index_vr_letter-C">C</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-CDPATH"><code>CDPATH</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Variables">Bourne Shell Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-CHILD_005fMAX"><code>CHILD_MAX</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-colored_002dcompletion_002dprefix"><code>colored-completion-prefix</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-colored_002dstats"><code>colored-stats</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-COLUMNS"><code>COLUMNS</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-comment_002dbegin"><code>comment-begin</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-completion_002ddisplay_002dwidth"><code>completion-display-width</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-completion_002dignore_002dcase"><code>completion-ignore-case</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-completion_002dmap_002dcase"><code>completion-map-case</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-completion_002dprefix_002ddisplay_002dlength"><code>completion-prefix-display-length</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-completion_002dquery_002ditems"><code>completion-query-items</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-COMPREPLY"><code>COMPREPLY</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-COMP_005fCWORD"><code>COMP_CWORD</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-COMP_005fKEY"><code>COMP_KEY</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-COMP_005fLINE"><code>COMP_LINE</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-COMP_005fPOINT"><code>COMP_POINT</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-COMP_005fTYPE"><code>COMP_TYPE</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-COMP_005fWORDBREAKS"><code>COMP_WORDBREAKS</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-COMP_005fWORDS"><code>COMP_WORDS</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-convert_002dmeta"><code>convert-meta</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-COPROC"><code>COPROC</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Variable-Index_vr_letter-D">D</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-DIRSTACK"><code>DIRSTACK</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-disable_002dcompletion"><code>disable-completion</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Variable-Index_vr_letter-E">E</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-echo_002dcontrol_002dcharacters"><code>echo-control-characters</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-editing_002dmode"><code>editing-mode</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-EMACS"><code>EMACS</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-emacs_002dmode_002dstring"><code>emacs-mode-string</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-enable_002dbracketed_002dpaste"><code>enable-bracketed-paste</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-enable_002dkeypad"><code>enable-keypad</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-ENV"><code>ENV</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-EPOCHREALTIME"><code>EPOCHREALTIME</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-EPOCHSECONDS"><code>EPOCHSECONDS</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-EUID"><code>EUID</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-EXECIGNORE"><code>EXECIGNORE</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-expand_002dtilde"><code>expand-tilde</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Variable-Index_vr_letter-F">F</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-FCEDIT"><code>FCEDIT</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-FIGNORE"><code>FIGNORE</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-FUNCNAME"><code>FUNCNAME</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-FUNCNEST"><code>FUNCNEST</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Variable-Index_vr_letter-G">G</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-GLOBIGNORE"><code>GLOBIGNORE</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-GROUPS"><code>GROUPS</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Variable-Index_vr_letter-H">H</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-histchars"><code>histchars</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-HISTCMD"><code>HISTCMD</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-HISTCONTROL"><code>HISTCONTROL</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-HISTFILE"><code>HISTFILE</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-HISTFILESIZE"><code>HISTFILESIZE</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-HISTIGNORE"><code>HISTIGNORE</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-history_002dpreserve_002dpoint"><code>history-preserve-point</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-history_002dsize"><code>history-size</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-HISTSIZE"><code>HISTSIZE</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-HISTTIMEFORMAT"><code>HISTTIMEFORMAT</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-HOME"><code>HOME</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Variables">Bourne Shell Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-horizontal_002dscroll_002dmode"><code>horizontal-scroll-mode</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-HOSTFILE"><code>HOSTFILE</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-HOSTNAME"><code>HOSTNAME</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-HOSTTYPE"><code>HOSTTYPE</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Variable-Index_vr_letter-I">I</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-IFS"><code>IFS</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Variables">Bourne Shell Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-IGNOREEOF"><code>IGNOREEOF</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-input_002dmeta"><code>input-meta</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-INPUTRC"><code>INPUTRC</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-INSIDE_005fEMACS"><code>INSIDE_EMACS</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-isearch_002dterminators"><code>isearch-terminators</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Variable-Index_vr_letter-K">K</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-keymap"><code>keymap</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Variable-Index_vr_letter-L">L</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-LANG"><code>LANG</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-LC_005fALL"><code>LC_ALL</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-LC_005fCOLLATE"><code>LC_COLLATE</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-LC_005fCTYPE"><code>LC_CTYPE</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-LC_005fMESSAGES"><code>LC_MESSAGES</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Locale-Translation">Locale Translation</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-LC_005fMESSAGES-1"><code>LC_MESSAGES</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-LC_005fNUMERIC"><code>LC_NUMERIC</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-LC_005fTIME"><code>LC_TIME</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-LINENO"><code>LINENO</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-LINES"><code>LINES</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Variable-Index_vr_letter-M">M</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-MACHTYPE"><code>MACHTYPE</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-MAIL"><code>MAIL</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Variables">Bourne Shell Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-MAILCHECK"><code>MAILCHECK</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-MAILPATH"><code>MAILPATH</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Variables">Bourne Shell Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-MAPFILE"><code>MAPFILE</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-mark_002dmodified_002dlines"><code>mark-modified-lines</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-mark_002dsymlinked_002ddirectories"><code>mark-symlinked-directories</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-match_002dhidden_002dfiles"><code>match-hidden-files</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-menu_002dcomplete_002ddisplay_002dprefix"><code>menu-complete-display-prefix</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-meta_002dflag"><code>meta-flag</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Variable-Index_vr_letter-O">O</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-OLDPWD"><code>OLDPWD</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-OPTARG"><code>OPTARG</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Variables">Bourne Shell Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-OPTERR"><code>OPTERR</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-OPTIND"><code>OPTIND</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Variables">Bourne Shell Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-OSTYPE"><code>OSTYPE</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-output_002dmeta"><code>output-meta</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Variable-Index_vr_letter-P">P</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-page_002dcompletions"><code>page-completions</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-PATH"><code>PATH</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Variables">Bourne Shell Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-PIPESTATUS"><code>PIPESTATUS</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-POSIXLY_005fCORRECT"><code>POSIXLY_CORRECT</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-PPID"><code>PPID</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-PROMPT_005fCOMMAND"><code>PROMPT_COMMAND</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-PROMPT_005fDIRTRIM"><code>PROMPT_DIRTRIM</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-PS0"><code>PS0</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-PS1"><code>PS1</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Variables">Bourne Shell Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-PS2"><code>PS2</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bourne-Shell-Variables">Bourne Shell Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-PS3"><code>PS3</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-PS4"><code>PS4</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-PWD"><code>PWD</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Variable-Index_vr_letter-R">R</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-RANDOM"><code>RANDOM</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-READLINE_005fLINE"><code>READLINE_LINE</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-READLINE_005fMARK"><code>READLINE_MARK</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-READLINE_005fPOINT"><code>READLINE_POINT</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-REPLY"><code>REPLY</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-revert_002dall_002dat_002dnewline"><code>revert-all-at-newline</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Variable-Index_vr_letter-S">S</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-SECONDS"><code>SECONDS</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-SHELL"><code>SHELL</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-SHELLOPTS"><code>SHELLOPTS</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-SHLVL"><code>SHLVL</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-show_002dall_002dif_002dambiguous"><code>show-all-if-ambiguous</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-show_002dall_002dif_002dunmodified"><code>show-all-if-unmodified</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-show_002dmode_002din_002dprompt"><code>show-mode-in-prompt</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-skip_002dcompleted_002dtext"><code>skip-completed-text</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-SRANDOM"><code>SRANDOM</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Variable-Index_vr_letter-T">T</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-TEXTDOMAIN"><code>TEXTDOMAIN</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Locale-Translation">Locale Translation</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-TEXTDOMAINDIR"><code>TEXTDOMAINDIR</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Locale-Translation">Locale Translation</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-TIMEFORMAT"><code>TIMEFORMAT</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-TMOUT"><code>TMOUT</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-TMPDIR"><code>TMPDIR</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Variable-Index_vr_letter-U">U</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-UID"><code>UID</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Variables">Bash Variables</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Variable-Index_vr_letter-V">V</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-vi_002dcmd_002dmode_002dstring"><code>vi-cmd-mode-string</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-vi_002dins_002dmode_002dstring"><code>vi-ins-mode-string</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-visible_002dstats"><code>visible-stats</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+</table>
+<table><tr><th valign="top">Jump to: &nbsp; </th><td><a class="summary-letter" href="#Variable-Index_vr_symbol-1"><b>!</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_symbol-2"><b>#</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_symbol-3"><b>$</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_symbol-4"><b>*</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_symbol-5"><b>-</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_symbol-6"><b>0</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_symbol-7"><b>?</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_symbol-8"><b>@</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_symbol-9"><b>_</b></a>
+ &nbsp; 
+<br>
+<a class="summary-letter" href="#Variable-Index_vr_letter-A"><b>A</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-B"><b>B</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-C"><b>C</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-D"><b>D</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-E"><b>E</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-F"><b>F</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-G"><b>G</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-H"><b>H</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-I"><b>I</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-K"><b>K</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-L"><b>L</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-M"><b>M</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-O"><b>O</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-P"><b>P</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-R"><b>R</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-S"><b>S</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-T"><b>T</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-U"><b>U</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Variable-Index_vr_letter-V"><b>V</b></a>
+ &nbsp; 
+</td></tr></table>
+
+<hr>
+<span id="Function-Index"></span><div class="header">
+<p>
+Next: <a href="#Concept-Index" accesskey="n" rel="next">Concept Index</a>, Previous: <a href="#Variable-Index" accesskey="p" rel="prev">Variable Index</a>, Up: <a href="#Indexes" accesskey="u" rel="up">Indexes</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Function-Index-1"></span><h3 class="appendixsec">D.4 Function Index</h3>
+<table><tr><th valign="top">Jump to: &nbsp; </th><td><a class="summary-letter" href="#Function-Index_fn_letter-A"><b>A</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-B"><b>B</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-C"><b>C</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-D"><b>D</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-E"><b>E</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-F"><b>F</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-G"><b>G</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-H"><b>H</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-I"><b>I</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-K"><b>K</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-M"><b>M</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-N"><b>N</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-O"><b>O</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-P"><b>P</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-Q"><b>Q</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-R"><b>R</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-S"><b>S</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-T"><b>T</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-U"><b>U</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-Y"><b>Y</b></a>
+ &nbsp; 
+</td></tr></table>
+<table class="index-fn" border="0">
+<tr><td></td><th align="left">Index Entry</th><td>&nbsp;</td><th align="left"> Section</th></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Function-Index_fn_letter-A">A</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-abort-_0028C_002dg_0029"><code>abort (C-g)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Miscellaneous-Commands">Miscellaneous Commands</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-accept_002dline-_0028Newline-or-Return_0029"><code>accept-line (Newline or Return)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-History">Commands For History</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-alias_002dexpand_002dline-_0028_0029"><code>alias-expand-line ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Miscellaneous-Commands">Miscellaneous Commands</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Function-Index_fn_letter-B">B</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-backward_002dchar-_0028C_002db_0029"><code>backward-char (C-b)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Moving">Commands For Moving</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-backward_002ddelete_002dchar-_0028Rubout_0029"><code>backward-delete-char (Rubout)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Text">Commands For Text</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-backward_002dkill_002dline-_0028C_002dx-Rubout_0029"><code>backward-kill-line (C-x Rubout)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Killing">Commands For Killing</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-backward_002dkill_002dword-_0028M_002dDEL_0029"><code>backward-kill-word (M-<span class="key">DEL</span>)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Killing">Commands For Killing</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-backward_002dword-_0028M_002db_0029"><code>backward-word (M-b)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Moving">Commands For Moving</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-beginning_002dof_002dhistory-_0028M_002d_003c_0029"><code>beginning-of-history (M-&lt;)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-History">Commands For History</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-beginning_002dof_002dline-_0028C_002da_0029"><code>beginning-of-line (C-a)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Moving">Commands For Moving</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-bracketed_002dpaste_002dbegin-_0028_0029"><code>bracketed-paste-begin ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Text">Commands For Text</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Function-Index_fn_letter-C">C</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-call_002dlast_002dkbd_002dmacro-_0028C_002dx-e_0029"><code>call-last-kbd-macro (C-x e)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Keyboard-Macros">Keyboard Macros</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-capitalize_002dword-_0028M_002dc_0029"><code>capitalize-word (M-c)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Text">Commands For Text</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-character_002dsearch-_0028C_002d_005d_0029"><code>character-search (C-])</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Miscellaneous-Commands">Miscellaneous Commands</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-character_002dsearch_002dbackward-_0028M_002dC_002d_005d_0029"><code>character-search-backward (M-C-])</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Miscellaneous-Commands">Miscellaneous Commands</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-clear_002ddisplay-_0028M_002dC_002dl_0029"><code>clear-display (M-C-l)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Moving">Commands For Moving</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-clear_002dscreen-_0028C_002dl_0029"><code>clear-screen (C-l)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Moving">Commands For Moving</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-complete-_0028TAB_0029"><code>complete (<span class="key">TAB</span>)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Completion">Commands For Completion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-complete_002dcommand-_0028M_002d_0021_0029"><code>complete-command (M-!)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Completion">Commands For Completion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-complete_002dfilename-_0028M_002d_002f_0029"><code>complete-filename (M-/)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Completion">Commands For Completion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-complete_002dhostname-_0028M_002d_0040_0029"><code>complete-hostname (M-@)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Completion">Commands For Completion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-complete_002dinto_002dbraces-_0028M_002d_007b_0029"><code>complete-into-braces (M-{)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Completion">Commands For Completion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-complete_002dusername-_0028M_002d_007e_0029"><code>complete-username (M-~)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Completion">Commands For Completion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-complete_002dvariable-_0028M_002d_0024_0029"><code>complete-variable (M-$)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Completion">Commands For Completion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-copy_002dbackward_002dword-_0028_0029"><code>copy-backward-word ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Killing">Commands For Killing</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-copy_002dforward_002dword-_0028_0029"><code>copy-forward-word ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Killing">Commands For Killing</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-copy_002dregion_002das_002dkill-_0028_0029"><code>copy-region-as-kill ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Killing">Commands For Killing</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Function-Index_fn_letter-D">D</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-dabbrev_002dexpand-_0028_0029"><code>dabbrev-expand ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Completion">Commands For Completion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-delete_002dchar-_0028C_002dd_0029"><code>delete-char (C-d)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Text">Commands For Text</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-delete_002dchar_002dor_002dlist-_0028_0029"><code>delete-char-or-list ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Completion">Commands For Completion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-delete_002dhorizontal_002dspace-_0028_0029"><code>delete-horizontal-space ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Killing">Commands For Killing</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-digit_002dargument-_0028M_002d0_002c-M_002d1_002c-_2026-M_002d_002d_0029"><code>digit-argument (<kbd>M-0</kbd>, <kbd>M-1</kbd>, &hellip; <kbd>M--</kbd>)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Numeric-Arguments">Numeric Arguments</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-display_002dshell_002dversion-_0028C_002dx-C_002dv_0029"><code>display-shell-version (C-x C-v)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Miscellaneous-Commands">Miscellaneous Commands</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-do_002dlowercase_002dversion-_0028M_002dA_002c-M_002dB_002c-M_002dx_002c-_2026_0029"><code>do-lowercase-version (M-A, M-B, M-<var>x</var>, &hellip;)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Miscellaneous-Commands">Miscellaneous Commands</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-downcase_002dword-_0028M_002dl_0029"><code>downcase-word (M-l)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Text">Commands For Text</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-dump_002dfunctions-_0028_0029"><code>dump-functions ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Miscellaneous-Commands">Miscellaneous Commands</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-dump_002dmacros-_0028_0029"><code>dump-macros ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Miscellaneous-Commands">Miscellaneous Commands</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-dump_002dvariables-_0028_0029"><code>dump-variables ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Miscellaneous-Commands">Miscellaneous Commands</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-dynamic_002dcomplete_002dhistory-_0028M_002dTAB_0029"><code>dynamic-complete-history (M-<span class="key">TAB</span>)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Completion">Commands For Completion</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Function-Index_fn_letter-E">E</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-edit_002dand_002dexecute_002dcommand-_0028C_002dx-C_002de_0029"><code>edit-and-execute-command (C-x C-e)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Miscellaneous-Commands">Miscellaneous Commands</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-end_002dkbd_002dmacro-_0028C_002dx-_0029_0029"><code>end-kbd-macro (C-x ))</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Keyboard-Macros">Keyboard Macros</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-end_002dof_002dfile-_0028usually-C_002dd_0029"><code><i>end-of-file</i> (usually C-d)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Text">Commands For Text</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-end_002dof_002dhistory-_0028M_002d_003e_0029"><code>end-of-history (M-&gt;)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-History">Commands For History</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-end_002dof_002dline-_0028C_002de_0029"><code>end-of-line (C-e)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Moving">Commands For Moving</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-exchange_002dpoint_002dand_002dmark-_0028C_002dx-C_002dx_0029"><code>exchange-point-and-mark (C-x C-x)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Miscellaneous-Commands">Miscellaneous Commands</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Function-Index_fn_letter-F">F</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-forward_002dbackward_002ddelete_002dchar-_0028_0029"><code>forward-backward-delete-char ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Text">Commands For Text</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-forward_002dchar-_0028C_002df_0029"><code>forward-char (C-f)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Moving">Commands For Moving</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-forward_002dsearch_002dhistory-_0028C_002ds_0029"><code>forward-search-history (C-s)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-History">Commands For History</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-forward_002dword-_0028M_002df_0029"><code>forward-word (M-f)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Moving">Commands For Moving</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Function-Index_fn_letter-G">G</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-glob_002dcomplete_002dword-_0028M_002dg_0029"><code>glob-complete-word (M-g)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Miscellaneous-Commands">Miscellaneous Commands</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-glob_002dexpand_002dword-_0028C_002dx-_002a_0029"><code>glob-expand-word (C-x *)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Miscellaneous-Commands">Miscellaneous Commands</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-glob_002dlist_002dexpansions-_0028C_002dx-g_0029"><code>glob-list-expansions (C-x g)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Miscellaneous-Commands">Miscellaneous Commands</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Function-Index_fn_letter-H">H</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-history_002dand_002dalias_002dexpand_002dline-_0028_0029"><code>history-and-alias-expand-line ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Miscellaneous-Commands">Miscellaneous Commands</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-history_002dexpand_002dline-_0028M_002d_005e_0029"><code>history-expand-line (M-^)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Miscellaneous-Commands">Miscellaneous Commands</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-history_002dsearch_002dbackward-_0028_0029"><code>history-search-backward ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-History">Commands For History</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-history_002dsearch_002dforward-_0028_0029"><code>history-search-forward ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-History">Commands For History</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-history_002dsubstring_002dsearch_002dbackward-_0028_0029"><code>history-substring-search-backward ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-History">Commands For History</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-history_002dsubstring_002dsearch_002dforward-_0028_0029"><code>history-substring-search-forward ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-History">Commands For History</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Function-Index_fn_letter-I">I</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-insert_002dcomment-_0028M_002d_0023_0029"><code>insert-comment (M-#)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Miscellaneous-Commands">Miscellaneous Commands</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-insert_002dcompletions-_0028M_002d_002a_0029"><code>insert-completions (M-*)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Completion">Commands For Completion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-insert_002dlast_002dargument-_0028M_002d_002e-or-M_002d_005f_0029"><code>insert-last-argument (M-. or M-_)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Miscellaneous-Commands">Miscellaneous Commands</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Function-Index_fn_letter-K">K</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-kill_002dline-_0028C_002dk_0029"><code>kill-line (C-k)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Killing">Commands For Killing</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-kill_002dregion-_0028_0029"><code>kill-region ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Killing">Commands For Killing</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-kill_002dwhole_002dline-_0028_0029"><code>kill-whole-line ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Killing">Commands For Killing</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-kill_002dword-_0028M_002dd_0029"><code>kill-word (M-d)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Killing">Commands For Killing</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Function-Index_fn_letter-M">M</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-magic_002dspace-_0028_0029"><code>magic-space ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Miscellaneous-Commands">Miscellaneous Commands</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-menu_002dcomplete-_0028_0029"><code>menu-complete ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Completion">Commands For Completion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-menu_002dcomplete_002dbackward-_0028_0029"><code>menu-complete-backward ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Completion">Commands For Completion</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Function-Index_fn_letter-N">N</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-next_002dhistory-_0028C_002dn_0029"><code>next-history (C-n)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-History">Commands For History</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-next_002dscreen_002dline-_0028_0029"><code>next-screen-line ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Moving">Commands For Moving</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-non_002dincremental_002dforward_002dsearch_002dhistory-_0028M_002dn_0029"><code>non-incremental-forward-search-history (M-n)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-History">Commands For History</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-non_002dincremental_002dreverse_002dsearch_002dhistory-_0028M_002dp_0029"><code>non-incremental-reverse-search-history (M-p)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-History">Commands For History</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Function-Index_fn_letter-O">O</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-operate_002dand_002dget_002dnext-_0028C_002do_0029"><code>operate-and-get-next (C-o)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-History">Commands For History</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-overwrite_002dmode-_0028_0029"><code>overwrite-mode ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Text">Commands For Text</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Function-Index_fn_letter-P">P</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-possible_002dcommand_002dcompletions-_0028C_002dx-_0021_0029"><code>possible-command-completions (C-x !)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Completion">Commands For Completion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-possible_002dcompletions-_0028M_002d_003f_0029"><code>possible-completions (M-?)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Completion">Commands For Completion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-possible_002dfilename_002dcompletions-_0028C_002dx-_002f_0029"><code>possible-filename-completions (C-x /)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Completion">Commands For Completion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-possible_002dhostname_002dcompletions-_0028C_002dx-_0040_0029"><code>possible-hostname-completions (C-x @)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Completion">Commands For Completion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-possible_002dusername_002dcompletions-_0028C_002dx-_007e_0029"><code>possible-username-completions (C-x ~)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Completion">Commands For Completion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-possible_002dvariable_002dcompletions-_0028C_002dx-_0024_0029"><code>possible-variable-completions (C-x $)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Completion">Commands For Completion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-prefix_002dmeta-_0028ESC_0029"><code>prefix-meta (<span class="key">ESC</span>)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Miscellaneous-Commands">Miscellaneous Commands</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-previous_002dhistory-_0028C_002dp_0029"><code>previous-history (C-p)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-History">Commands For History</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-previous_002dscreen_002dline-_0028_0029"><code>previous-screen-line ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Moving">Commands For Moving</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-print_002dlast_002dkbd_002dmacro-_0028_0029"><code>print-last-kbd-macro ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Keyboard-Macros">Keyboard Macros</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Function-Index_fn_letter-Q">Q</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-quoted_002dinsert-_0028C_002dq-or-C_002dv_0029"><code>quoted-insert (C-q or C-v)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Text">Commands For Text</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Function-Index_fn_letter-R">R</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-re_002dread_002dinit_002dfile-_0028C_002dx-C_002dr_0029"><code>re-read-init-file (C-x C-r)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Miscellaneous-Commands">Miscellaneous Commands</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-redraw_002dcurrent_002dline-_0028_0029"><code>redraw-current-line ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Moving">Commands For Moving</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-reverse_002dsearch_002dhistory-_0028C_002dr_0029"><code>reverse-search-history (C-r)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-History">Commands For History</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-revert_002dline-_0028M_002dr_0029"><code>revert-line (M-r)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Miscellaneous-Commands">Miscellaneous Commands</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Function-Index_fn_letter-S">S</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-self_002dinsert-_0028a_002c-b_002c-A_002c-1_002c-_0021_002c-_2026_0029"><code>self-insert (a, b, A, 1, !, &hellip;)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Text">Commands For Text</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-set_002dmark-_0028C_002d_0040_0029"><code>set-mark (C-@)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Miscellaneous-Commands">Miscellaneous Commands</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-shell_002dbackward_002dkill_002dword-_0028_0029"><code>shell-backward-kill-word ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Killing">Commands For Killing</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-shell_002dbackward_002dword-_0028M_002dC_002db_0029"><code>shell-backward-word (M-C-b)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Moving">Commands For Moving</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-shell_002dexpand_002dline-_0028M_002dC_002de_0029"><code>shell-expand-line (M-C-e)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Miscellaneous-Commands">Miscellaneous Commands</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-shell_002dforward_002dword-_0028M_002dC_002df_0029"><code>shell-forward-word (M-C-f)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Moving">Commands For Moving</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-shell_002dkill_002dword-_0028M_002dC_002dd_0029"><code>shell-kill-word (M-C-d)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Killing">Commands For Killing</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-shell_002dtranspose_002dwords-_0028M_002dC_002dt_0029"><code>shell-transpose-words (M-C-t)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Killing">Commands For Killing</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-skip_002dcsi_002dsequence-_0028_0029"><code>skip-csi-sequence ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Miscellaneous-Commands">Miscellaneous Commands</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-start_002dkbd_002dmacro-_0028C_002dx-_0028_0029"><code>start-kbd-macro (C-x ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Keyboard-Macros">Keyboard Macros</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Function-Index_fn_letter-T">T</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-tilde_002dexpand-_0028M_002d_0026_0029"><code>tilde-expand (M-&amp;)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Miscellaneous-Commands">Miscellaneous Commands</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-transpose_002dchars-_0028C_002dt_0029"><code>transpose-chars (C-t)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Text">Commands For Text</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-transpose_002dwords-_0028M_002dt_0029"><code>transpose-words (M-t)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Text">Commands For Text</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Function-Index_fn_letter-U">U</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-undo-_0028C_002d_005f-or-C_002dx-C_002du_0029"><code>undo (C-_ or C-x C-u)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Miscellaneous-Commands">Miscellaneous Commands</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-universal_002dargument-_0028_0029"><code>universal-argument ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Numeric-Arguments">Numeric Arguments</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-unix_002dfilename_002drubout-_0028_0029"><code>unix-filename-rubout ()</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Killing">Commands For Killing</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-unix_002dline_002ddiscard-_0028C_002du_0029"><code>unix-line-discard (C-u)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Killing">Commands For Killing</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-unix_002dword_002drubout-_0028C_002dw_0029"><code>unix-word-rubout (C-w)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Killing">Commands For Killing</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-upcase_002dword-_0028M_002du_0029"><code>upcase-word (M-u)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Text">Commands For Text</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Function-Index_fn_letter-Y">Y</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-yank-_0028C_002dy_0029"><code>yank (C-y)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Killing">Commands For Killing</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-yank_002dlast_002darg-_0028M_002d_002e-or-M_002d_005f_0029"><code>yank-last-arg (M-. or M-_)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-History">Commands For History</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-yank_002dnth_002darg-_0028M_002dC_002dy_0029"><code>yank-nth-arg (M-C-y)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-History">Commands For History</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-yank_002dpop-_0028M_002dy_0029"><code>yank-pop (M-y)</code></a>:</td><td>&nbsp;</td><td valign="top"><a href="#Commands-For-Killing">Commands For Killing</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+</table>
+<table><tr><th valign="top">Jump to: &nbsp; </th><td><a class="summary-letter" href="#Function-Index_fn_letter-A"><b>A</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-B"><b>B</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-C"><b>C</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-D"><b>D</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-E"><b>E</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-F"><b>F</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-G"><b>G</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-H"><b>H</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-I"><b>I</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-K"><b>K</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-M"><b>M</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-N"><b>N</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-O"><b>O</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-P"><b>P</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-Q"><b>Q</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-R"><b>R</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-S"><b>S</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-T"><b>T</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-U"><b>U</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Function-Index_fn_letter-Y"><b>Y</b></a>
+ &nbsp; 
+</td></tr></table>
+
+<hr>
+<span id="Concept-Index"></span><div class="header">
+<p>
+Previous: <a href="#Function-Index" accesskey="p" rel="prev">Function Index</a>, Up: <a href="#Indexes" accesskey="u" rel="up">Indexes</a> &nbsp; [<a href="#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="#Indexes" title="Index" rel="index">Index</a>]</p>
+</div>
+<span id="Concept-Index-1"></span><h3 class="appendixsec">D.5 Concept Index</h3>
+<table><tr><th valign="top">Jump to: &nbsp; </th><td><a class="summary-letter" href="#Concept-Index_cp_letter-A"><b>A</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-B"><b>B</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-C"><b>C</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-D"><b>D</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-E"><b>E</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-F"><b>F</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-H"><b>H</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-I"><b>I</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-J"><b>J</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-K"><b>K</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-L"><b>L</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-M"><b>M</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-N"><b>N</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-O"><b>O</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-P"><b>P</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-Q"><b>Q</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-R"><b>R</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-S"><b>S</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-T"><b>T</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-V"><b>V</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-W"><b>W</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-Y"><b>Y</b></a>
+ &nbsp; 
+</td></tr></table>
+<table class="index-cp" border="0">
+<tr><td></td><th align="left">Index Entry</th><td>&nbsp;</td><th align="left"> Section</th></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Concept-Index_cp_letter-A">A</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-alias-expansion">alias expansion</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Aliases">Aliases</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-arithmetic-evaluation">arithmetic evaluation</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Shell-Arithmetic">Shell Arithmetic</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-arithmetic-expansion">arithmetic expansion</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Arithmetic-Expansion">Arithmetic Expansion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-arithmetic_002c-shell">arithmetic, shell</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Shell-Arithmetic">Shell Arithmetic</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-arrays">arrays</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Arrays">Arrays</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Concept-Index_cp_letter-B">B</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-background">background</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Job-Control-Basics">Job Control Basics</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-Bash-configuration">Bash configuration</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Basic-Installation">Basic Installation</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-Bash-installation">Bash installation</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Basic-Installation">Basic Installation</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-Bourne-shell">Bourne shell</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Basic-Shell-Features">Basic Shell Features</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-brace-expansion">brace expansion</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Brace-Expansion">Brace Expansion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-builtin-1">builtin</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Definitions">Definitions</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Concept-Index_cp_letter-C">C</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-command-editing">command editing</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Bare-Essentials">Readline Bare Essentials</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-command-execution">command execution</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Command-Search-and-Execution">Command Search and Execution</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-command-expansion">command expansion</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Simple-Command-Expansion">Simple Command Expansion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-command-history">command history</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-History-Facilities">Bash History Facilities</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-command-search">command search</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Command-Search-and-Execution">Command Search and Execution</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-command-substitution">command substitution</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Command-Substitution">Command Substitution</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-command-timing">command timing</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Pipelines">Pipelines</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-commands_002c-compound">commands, compound</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Compound-Commands">Compound Commands</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-commands_002c-conditional">commands, conditional</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Conditional-Constructs">Conditional Constructs</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-commands_002c-grouping">commands, grouping</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Command-Grouping">Command Grouping</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-commands_002c-lists">commands, lists</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Lists">Lists</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-commands_002c-looping">commands, looping</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Looping-Constructs">Looping Constructs</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-commands_002c-pipelines">commands, pipelines</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Pipelines">Pipelines</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-commands_002c-shell">commands, shell</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Shell-Commands">Shell Commands</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-commands_002c-simple">commands, simple</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Simple-Commands">Simple Commands</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-comments_002c-shell">comments, shell</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Comments">Comments</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-Compatibility-Level">Compatibility Level</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Shell-Compatibility-Mode">Shell Compatibility Mode</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-Compatibility-Mode">Compatibility Mode</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Shell-Compatibility-Mode">Shell Compatibility Mode</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-completion-builtins">completion builtins</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Programmable-Completion-Builtins">Programmable Completion Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-configuration">configuration</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Basic-Installation">Basic Installation</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-control-operator">control operator</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Definitions">Definitions</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-coprocess">coprocess</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Coprocesses">Coprocesses</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Concept-Index_cp_letter-D">D</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-directory-stack">directory stack</a>:</td><td>&nbsp;</td><td valign="top"><a href="#The-Directory-Stack">The Directory Stack</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Concept-Index_cp_letter-E">E</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-editing-command-lines">editing command lines</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Bare-Essentials">Readline Bare Essentials</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-environment">environment</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Environment">Environment</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-evaluation_002c-arithmetic">evaluation, arithmetic</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Shell-Arithmetic">Shell Arithmetic</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-event-designators">event designators</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Event-Designators">Event Designators</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-execution-environment">execution environment</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Command-Execution-Environment">Command Execution Environment</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-exit-status">exit status</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Definitions">Definitions</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-exit-status-1">exit status</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Exit-Status">Exit Status</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-expansion">expansion</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Shell-Expansions">Shell Expansions</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-expansion_002c-arithmetic">expansion, arithmetic</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Arithmetic-Expansion">Arithmetic Expansion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-expansion_002c-brace">expansion, brace</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Brace-Expansion">Brace Expansion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-expansion_002c-filename">expansion, filename</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Filename-Expansion">Filename Expansion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-expansion_002c-parameter">expansion, parameter</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Shell-Parameter-Expansion">Shell Parameter Expansion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-expansion_002c-pathname">expansion, pathname</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Filename-Expansion">Filename Expansion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-expansion_002c-tilde">expansion, tilde</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Tilde-Expansion">Tilde Expansion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-expressions_002c-arithmetic">expressions, arithmetic</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Shell-Arithmetic">Shell Arithmetic</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-expressions_002c-conditional">expressions, conditional</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Conditional-Expressions">Bash Conditional Expressions</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Concept-Index_cp_letter-F">F</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-field">field</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Definitions">Definitions</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-filename">filename</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Definitions">Definitions</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-filename-expansion">filename expansion</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Filename-Expansion">Filename Expansion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-foreground">foreground</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Job-Control-Basics">Job Control Basics</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-functions_002c-shell">functions, shell</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Shell-Functions">Shell Functions</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Concept-Index_cp_letter-H">H</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-history-builtins">history builtins</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-History-Builtins">Bash History Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-history-events">history events</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Event-Designators">Event Designators</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-history-expansion">history expansion</a>:</td><td>&nbsp;</td><td valign="top"><a href="#History-Interaction">History Interaction</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-history-list">history list</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-History-Facilities">Bash History Facilities</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-History_002c-how-to-use">History, how to use</a>:</td><td>&nbsp;</td><td valign="top"><a href="#A-Programmable-Completion-Example">A Programmable Completion Example</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Concept-Index_cp_letter-I">I</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-identifier">identifier</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Definitions">Definitions</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-initialization-file_002c-readline">initialization file, readline</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File">Readline Init File</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-installation">installation</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Basic-Installation">Basic Installation</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-interaction_002c-readline">interaction, readline</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Interaction">Readline Interaction</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-interactive-shell">interactive shell</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Invoking-Bash">Invoking Bash</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-interactive-shell-1">interactive shell</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Interactive-Shells">Interactive Shells</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-internationalization">internationalization</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Locale-Translation">Locale Translation</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Concept-Index_cp_letter-J">J</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-job">job</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Definitions">Definitions</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-job-control">job control</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Definitions">Definitions</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-job-control-1">job control</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Job-Control-Basics">Job Control Basics</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Concept-Index_cp_letter-K">K</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-kill-ring">kill ring</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Killing-Commands">Readline Killing Commands</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-killing-text">killing text</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Killing-Commands">Readline Killing Commands</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Concept-Index_cp_letter-L">L</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-localization">localization</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Locale-Translation">Locale Translation</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-login-shell">login shell</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Invoking-Bash">Invoking Bash</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Concept-Index_cp_letter-M">M</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-matching_002c-pattern">matching, pattern</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Pattern-Matching">Pattern Matching</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-metacharacter">metacharacter</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Definitions">Definitions</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Concept-Index_cp_letter-N">N</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-name">name</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Definitions">Definitions</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-native-languages">native languages</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Locale-Translation">Locale Translation</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-notation_002c-readline">notation, readline</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Bare-Essentials">Readline Bare Essentials</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Concept-Index_cp_letter-O">O</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-operator_002c-shell">operator, shell</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Definitions">Definitions</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Concept-Index_cp_letter-P">P</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-parameter-expansion">parameter expansion</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Shell-Parameter-Expansion">Shell Parameter Expansion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-parameters">parameters</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Shell-Parameters">Shell Parameters</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-parameters_002c-positional">parameters, positional</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Positional-Parameters">Positional Parameters</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-parameters_002c-special">parameters, special</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Special-Parameters">Special Parameters</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-pathname-expansion">pathname expansion</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Filename-Expansion">Filename Expansion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-pattern-matching">pattern matching</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Pattern-Matching">Pattern Matching</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-pipeline">pipeline</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Pipelines">Pipelines</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-POSIX">POSIX</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Definitions">Definitions</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-POSIX-Mode">POSIX Mode</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-POSIX-Mode">Bash POSIX Mode</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-process-group">process group</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Definitions">Definitions</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-process-group-ID">process group ID</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Definitions">Definitions</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-process-substitution">process substitution</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Process-Substitution">Process Substitution</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-programmable-completion">programmable completion</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Programmable-Completion">Programmable Completion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-prompting">prompting</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Controlling-the-Prompt">Controlling the Prompt</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Concept-Index_cp_letter-Q">Q</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-quoting">quoting</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Quoting">Quoting</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-quoting_002c-ANSI">quoting, ANSI</a>:</td><td>&nbsp;</td><td valign="top"><a href="#ANSI_002dC-Quoting">ANSI-C Quoting</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Concept-Index_cp_letter-R">R</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-Readline_002c-how-to-use">Readline, how to use</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Job-Control-Variables">Job Control Variables</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-redirection">redirection</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Redirections">Redirections</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-reserved-word">reserved word</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Definitions">Definitions</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-reserved-words">reserved words</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Reserved-Words">Reserved Words</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-restricted-shell">restricted shell</a>:</td><td>&nbsp;</td><td valign="top"><a href="#The-Restricted-Shell">The Restricted Shell</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-return-status">return status</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Definitions">Definitions</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Concept-Index_cp_letter-S">S</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-shell-arithmetic">shell arithmetic</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Shell-Arithmetic">Shell Arithmetic</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-shell-function">shell function</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Shell-Functions">Shell Functions</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-shell-script">shell script</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Shell-Scripts">Shell Scripts</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-shell-variable">shell variable</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Shell-Parameters">Shell Parameters</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-shell_002c-interactive">shell, interactive</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Interactive-Shells">Interactive Shells</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-signal">signal</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Definitions">Definitions</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-signal-handling">signal handling</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Signals">Signals</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-special-builtin">special builtin</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Definitions">Definitions</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-special-builtin-1">special builtin</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Special-Builtins">Special Builtins</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-startup-files">startup files</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Bash-Startup-Files">Bash Startup Files</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-suspending-jobs">suspending jobs</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Job-Control-Basics">Job Control Basics</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Concept-Index_cp_letter-T">T</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-tilde-expansion">tilde expansion</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Tilde-Expansion">Tilde Expansion</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-token">token</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Definitions">Definitions</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-translation_002c-native-languages">translation, native languages</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Locale-Translation">Locale Translation</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Concept-Index_cp_letter-V">V</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-variable_002c-shell">variable, shell</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Shell-Parameters">Shell Parameters</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-variables_002c-readline">variables, readline</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Init-File-Syntax">Readline Init File Syntax</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Concept-Index_cp_letter-W">W</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-word">word</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Definitions">Definitions</a></td></tr>
+<tr><td></td><td valign="top"><a href="#index-word-splitting">word splitting</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Word-Splitting">Word Splitting</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+<tr><th id="Concept-Index_cp_letter-Y">Y</th><td></td><td></td></tr>
+<tr><td></td><td valign="top"><a href="#index-yanking-text">yanking text</a>:</td><td>&nbsp;</td><td valign="top"><a href="#Readline-Killing-Commands">Readline Killing Commands</a></td></tr>
+<tr><td colspan="4"> <hr></td></tr>
+</table>
+<table><tr><th valign="top">Jump to: &nbsp; </th><td><a class="summary-letter" href="#Concept-Index_cp_letter-A"><b>A</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-B"><b>B</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-C"><b>C</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-D"><b>D</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-E"><b>E</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-F"><b>F</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-H"><b>H</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-I"><b>I</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-J"><b>J</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-K"><b>K</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-L"><b>L</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-M"><b>M</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-N"><b>N</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-O"><b>O</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-P"><b>P</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-Q"><b>Q</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-R"><b>R</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-S"><b>S</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-T"><b>T</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-V"><b>V</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-W"><b>W</b></a>
+ &nbsp; 
+<a class="summary-letter" href="#Concept-Index_cp_letter-Y"><b>Y</b></a>
+ &nbsp; 
+</td></tr></table>
+
+<hr>
+
+
+
+</body>
+</html>
diff --git a/doc/bashref.info b/doc/bashref.info
new file mode 100644
index 0000000..20ebf24
--- /dev/null
+++ b/doc/bashref.info
@@ -0,0 +1,12123 @@
+This is bashref.info, produced by makeinfo version 6.7 from
+bashref.texi.
+
+This text is a brief description of the features that are present in the
+Bash shell (version 5.1, 29 October 2020).
+
+   This is Edition 5.1, last updated 29 October 2020, of 'The GNU Bash
+Reference Manual', for 'Bash', Version 5.1.
+
+   Copyright (C) 1988-2020 Free Software Foundation, Inc.
+
+     Permission is granted to copy, distribute and/or modify this
+     document under the terms of the GNU Free Documentation License,
+     Version 1.3 or any later version published by the Free Software
+     Foundation; with no Invariant Sections, no Front-Cover Texts, and
+     no Back-Cover Texts.  A copy of the license is included in the
+     section entitled "GNU Free Documentation License".
+INFO-DIR-SECTION Basics
+START-INFO-DIR-ENTRY
+* Bash: (bash).                     The GNU Bourne-Again SHell.
+END-INFO-DIR-ENTRY
+
+
+File: bashref.info,  Node: Top,  Next: Introduction,  Prev: (dir),  Up: (dir)
+
+Bash Features
+*************
+
+This text is a brief description of the features that are present in the
+Bash shell (version 5.1, 29 October 2020).  The Bash home page is
+<http://www.gnu.org/software/bash/>.
+
+   This is Edition 5.1, last updated 29 October 2020, of 'The GNU Bash
+Reference Manual', for 'Bash', Version 5.1.
+
+   Bash contains features that appear in other popular shells, and some
+features that only appear in Bash.  Some of the shells that Bash has
+borrowed concepts from are the Bourne Shell ('sh'), the Korn Shell
+('ksh'), and the C-shell ('csh' and its successor, 'tcsh').  The
+following menu breaks the features up into categories, noting which
+features were inspired by other shells and which are specific to Bash.
+
+   This manual is meant as a brief introduction to features found in
+Bash.  The Bash manual page should be used as the definitive reference
+on shell behavior.
+
+* Menu:
+
+* Introduction::		An introduction to the shell.
+* Definitions::			Some definitions used in the rest of this
+				manual.
+* Basic Shell Features::	The shell "building blocks".
+* Shell Builtin Commands::	Commands that are a part of the shell.
+* Shell Variables::		Variables used or set by Bash.
+* Bash Features::		Features found only in Bash.
+* Job Control::			What job control is and how Bash allows you
+				to use it.
+* Command Line Editing::	Chapter describing the command line
+				editing features.
+* Using History Interactively::	Command History Expansion
+* Installing Bash::		How to build and install Bash on your system.
+* Reporting Bugs::		How to report bugs in Bash.
+* Major Differences From The Bourne Shell::	A terse list of the differences
+						between Bash and historical
+						versions of /bin/sh.
+* GNU Free Documentation License::	Copying and sharing this documentation.
+* Indexes::			Various indexes for this manual.
+
+
+File: bashref.info,  Node: Introduction,  Next: Definitions,  Up: Top
+
+1 Introduction
+**************
+
+* Menu:
+
+* What is Bash?::		A short description of Bash.
+* What is a shell?::		A brief introduction to shells.
+
+
+File: bashref.info,  Node: What is Bash?,  Next: What is a shell?,  Up: Introduction
+
+1.1 What is Bash?
+=================
+
+Bash is the shell, or command language interpreter, for the GNU
+operating system.  The name is an acronym for the 'Bourne-Again SHell',
+a pun on Stephen Bourne, the author of the direct ancestor of the
+current Unix shell 'sh', which appeared in the Seventh Edition Bell Labs
+Research version of Unix.
+
+   Bash is largely compatible with 'sh' and incorporates useful features
+from the Korn shell 'ksh' and the C shell 'csh'.  It is intended to be a
+conformant implementation of the IEEE POSIX Shell and Tools portion of
+the IEEE POSIX specification (IEEE Standard 1003.1).  It offers
+functional improvements over 'sh' for both interactive and programming
+use.
+
+   While the GNU operating system provides other shells, including a
+version of 'csh', Bash is the default shell.  Like other GNU software,
+Bash is quite portable.  It currently runs on nearly every version of
+Unix and a few other operating systems - independently-supported ports
+exist for MS-DOS, OS/2, and Windows platforms.
+
+
+File: bashref.info,  Node: What is a shell?,  Prev: What is Bash?,  Up: Introduction
+
+1.2 What is a shell?
+====================
+
+At its base, a shell is simply a macro processor that executes commands.
+The term macro processor means functionality where text and symbols are
+expanded to create larger expressions.
+
+   A Unix shell is both a command interpreter and a programming
+language.  As a command interpreter, the shell provides the user
+interface to the rich set of GNU utilities.  The programming language
+features allow these utilities to be combined.  Files containing
+commands can be created, and become commands themselves.  These new
+commands have the same status as system commands in directories such as
+'/bin', allowing users or groups to establish custom environments to
+automate their common tasks.
+
+   Shells may be used interactively or non-interactively.  In
+interactive mode, they accept input typed from the keyboard.  When
+executing non-interactively, shells execute commands read from a file.
+
+   A shell allows execution of GNU commands, both synchronously and
+asynchronously.  The shell waits for synchronous commands to complete
+before accepting more input; asynchronous commands continue to execute
+in parallel with the shell while it reads and executes additional
+commands.  The "redirection" constructs permit fine-grained control of
+the input and output of those commands.  Moreover, the shell allows
+control over the contents of commands' environments.
+
+   Shells also provide a small set of built-in commands ("builtins")
+implementing functionality impossible or inconvenient to obtain via
+separate utilities.  For example, 'cd', 'break', 'continue', and 'exec'
+cannot be implemented outside of the shell because they directly
+manipulate the shell itself.  The 'history', 'getopts', 'kill', or 'pwd'
+builtins, among others, could be implemented in separate utilities, but
+they are more convenient to use as builtin commands.  All of the shell
+builtins are described in subsequent sections.
+
+   While executing commands is essential, most of the power (and
+complexity) of shells is due to their embedded programming languages.
+Like any high-level language, the shell provides variables, flow control
+constructs, quoting, and functions.
+
+   Shells offer features geared specifically for interactive use rather
+than to augment the programming language.  These interactive features
+include job control, command line editing, command history and aliases.
+Each of these features is described in this manual.
+
+
+File: bashref.info,  Node: Definitions,  Next: Basic Shell Features,  Prev: Introduction,  Up: Top
+
+2 Definitions
+*************
+
+These definitions are used throughout the remainder of this manual.
+
+'POSIX'
+     A family of open system standards based on Unix.  Bash is primarily
+     concerned with the Shell and Utilities portion of the POSIX 1003.1
+     standard.
+
+'blank'
+     A space or tab character.
+
+'builtin'
+     A command that is implemented internally by the shell itself,
+     rather than by an executable program somewhere in the file system.
+
+'control operator'
+     A 'token' that performs a control function.  It is a 'newline' or
+     one of the following: '||', '&&', '&', ';', ';;', ';&', ';;&', '|',
+     '|&', '(', or ')'.
+
+'exit status'
+     The value returned by a command to its caller.  The value is
+     restricted to eight bits, so the maximum value is 255.
+
+'field'
+     A unit of text that is the result of one of the shell expansions.
+     After expansion, when executing a command, the resulting fields are
+     used as the command name and arguments.
+
+'filename'
+     A string of characters used to identify a file.
+
+'job'
+     A set of processes comprising a pipeline, and any processes
+     descended from it, that are all in the same process group.
+
+'job control'
+     A mechanism by which users can selectively stop (suspend) and
+     restart (resume) execution of processes.
+
+'metacharacter'
+     A character that, when unquoted, separates words.  A metacharacter
+     is a 'space', 'tab', 'newline', or one of the following characters:
+     '|', '&', ';', '(', ')', '<', or '>'.
+
+'name'
+     A 'word' consisting solely of letters, numbers, and underscores,
+     and beginning with a letter or underscore.  'Name's are used as
+     shell variable and function names.  Also referred to as an
+     'identifier'.
+
+'operator'
+     A 'control operator' or a 'redirection operator'.  *Note
+     Redirections::, for a list of redirection operators.  Operators
+     contain at least one unquoted 'metacharacter'.
+
+'process group'
+     A collection of related processes each having the same process
+     group ID.
+
+'process group ID'
+     A unique identifier that represents a 'process group' during its
+     lifetime.
+
+'reserved word'
+     A 'word' that has a special meaning to the shell.  Most reserved
+     words introduce shell flow control constructs, such as 'for' and
+     'while'.
+
+'return status'
+     A synonym for 'exit status'.
+
+'signal'
+     A mechanism by which a process may be notified by the kernel of an
+     event occurring in the system.
+
+'special builtin'
+     A shell builtin command that has been classified as special by the
+     POSIX standard.
+
+'token'
+     A sequence of characters considered a single unit by the shell.  It
+     is either a 'word' or an 'operator'.
+
+'word'
+     A sequence of characters treated as a unit by the shell.  Words may
+     not include unquoted 'metacharacters'.
+
+
+File: bashref.info,  Node: Basic Shell Features,  Next: Shell Builtin Commands,  Prev: Definitions,  Up: Top
+
+3 Basic Shell Features
+**********************
+
+Bash is an acronym for 'Bourne-Again SHell'.  The Bourne shell is the
+traditional Unix shell originally written by Stephen Bourne.  All of the
+Bourne shell builtin commands are available in Bash, The rules for
+evaluation and quoting are taken from the POSIX specification for the
+'standard' Unix shell.
+
+   This chapter briefly summarizes the shell's 'building blocks':
+commands, control structures, shell functions, shell parameters, shell
+expansions, redirections, which are a way to direct input and output
+from and to named files, and how the shell executes commands.
+
+* Menu:
+
+* Shell Syntax::		What your input means to the shell.
+* Shell Commands::		The types of commands you can use.
+* Shell Functions::		Grouping commands by name.
+* Shell Parameters::		How the shell stores values.
+* Shell Expansions::		How Bash expands parameters and the various
+				expansions available.
+* Redirections::		A way to control where input and output go.
+* Executing Commands::		What happens when you run a command.
+* Shell Scripts::		Executing files of shell commands.
+
+
+File: bashref.info,  Node: Shell Syntax,  Next: Shell Commands,  Up: Basic Shell Features
+
+3.1 Shell Syntax
+================
+
+* Menu:
+
+* Shell Operation::	The basic operation of the shell.
+* Quoting::		How to remove the special meaning from characters.
+* Comments::		How to specify comments.
+
+When the shell reads input, it proceeds through a sequence of
+operations.  If the input indicates the beginning of a comment, the
+shell ignores the comment symbol ('#'), and the rest of that line.
+
+   Otherwise, roughly speaking, the shell reads its input and divides
+the input into words and operators, employing the quoting rules to
+select which meanings to assign various words and characters.
+
+   The shell then parses these tokens into commands and other
+constructs, removes the special meaning of certain words or characters,
+expands others, redirects input and output as needed, executes the
+specified command, waits for the command's exit status, and makes that
+exit status available for further inspection or processing.
+
+
+File: bashref.info,  Node: Shell Operation,  Next: Quoting,  Up: Shell Syntax
+
+3.1.1 Shell Operation
+---------------------
+
+The following is a brief description of the shell's operation when it
+reads and executes a command.  Basically, the shell does the following:
+
+  1. Reads its input from a file (*note Shell Scripts::), from a string
+     supplied as an argument to the '-c' invocation option (*note
+     Invoking Bash::), or from the user's terminal.
+
+  2. Breaks the input into words and operators, obeying the quoting
+     rules described in *note Quoting::.  These tokens are separated by
+     'metacharacters'.  Alias expansion is performed by this step (*note
+     Aliases::).
+
+  3. Parses the tokens into simple and compound commands (*note Shell
+     Commands::).
+
+  4. Performs the various shell expansions (*note Shell Expansions::),
+     breaking the expanded tokens into lists of filenames (*note
+     Filename Expansion::) and commands and arguments.
+
+  5. Performs any necessary redirections (*note Redirections::) and
+     removes the redirection operators and their operands from the
+     argument list.
+
+  6. Executes the command (*note Executing Commands::).
+
+  7. Optionally waits for the command to complete and collects its exit
+     status (*note Exit Status::).
+
+
+File: bashref.info,  Node: Quoting,  Next: Comments,  Prev: Shell Operation,  Up: Shell Syntax
+
+3.1.2 Quoting
+-------------
+
+* Menu:
+
+* Escape Character::	How to remove the special meaning from a single
+			character.
+* Single Quotes::	How to inhibit all interpretation of a sequence
+			of characters.
+* Double Quotes::	How to suppress most of the interpretation of a
+			sequence of characters.
+* ANSI-C Quoting::	How to expand ANSI-C sequences in quoted strings.
+* Locale Translation::	How to translate strings into different languages.
+
+Quoting is used to remove the special meaning of certain characters or
+words to the shell.  Quoting can be used to disable special treatment
+for special characters, to prevent reserved words from being recognized
+as such, and to prevent parameter expansion.
+
+   Each of the shell metacharacters (*note Definitions::) has special
+meaning to the shell and must be quoted if it is to represent itself.
+When the command history expansion facilities are being used (*note
+History Interaction::), the HISTORY EXPANSION character, usually '!',
+must be quoted to prevent history expansion.  *Note Bash History
+Facilities::, for more details concerning history expansion.
+
+   There are three quoting mechanisms: the ESCAPE CHARACTER, single
+quotes, and double quotes.
+
+
+File: bashref.info,  Node: Escape Character,  Next: Single Quotes,  Up: Quoting
+
+3.1.2.1 Escape Character
+........................
+
+A non-quoted backslash '\' is the Bash escape character.  It preserves
+the literal value of the next character that follows, with the exception
+of 'newline'.  If a '\newline' pair appears, and the backslash itself is
+not quoted, the '\newline' is treated as a line continuation (that is,
+it is removed from the input stream and effectively ignored).
+
+
+File: bashref.info,  Node: Single Quotes,  Next: Double Quotes,  Prev: Escape Character,  Up: Quoting
+
+3.1.2.2 Single Quotes
+.....................
+
+Enclosing characters in single quotes (''') preserves the literal value
+of each character within the quotes.  A single quote may not occur
+between single quotes, even when preceded by a backslash.
+
+
+File: bashref.info,  Node: Double Quotes,  Next: ANSI-C Quoting,  Prev: Single Quotes,  Up: Quoting
+
+3.1.2.3 Double Quotes
+.....................
+
+Enclosing characters in double quotes ('"') preserves the literal value
+of all characters within the quotes, with the exception of '$', '`',
+'\', and, when history expansion is enabled, '!'.  When the shell is in
+POSIX mode (*note Bash POSIX Mode::), the '!' has no special meaning
+within double quotes, even when history expansion is enabled.  The
+characters '$' and '`' retain their special meaning within double quotes
+(*note Shell Expansions::).  The backslash retains its special meaning
+only when followed by one of the following characters: '$', '`', '"',
+'\', or 'newline'.  Within double quotes, backslashes that are followed
+by one of these characters are removed.  Backslashes preceding
+characters without a special meaning are left unmodified.  A double
+quote may be quoted within double quotes by preceding it with a
+backslash.  If enabled, history expansion will be performed unless an
+'!' appearing in double quotes is escaped using a backslash.  The
+backslash preceding the '!' is not removed.
+
+   The special parameters '*' and '@' have special meaning when in
+double quotes (*note Shell Parameter Expansion::).
+
+
+File: bashref.info,  Node: ANSI-C Quoting,  Next: Locale Translation,  Prev: Double Quotes,  Up: Quoting
+
+3.1.2.4 ANSI-C Quoting
+......................
+
+Words of the form '$'STRING'' are treated specially.  The word expands
+to STRING, with backslash-escaped characters replaced as specified by
+the ANSI C standard.  Backslash escape sequences, if present, are
+decoded as follows:
+
+'\a'
+     alert (bell)
+'\b'
+     backspace
+'\e'
+'\E'
+     an escape character (not ANSI C)
+'\f'
+     form feed
+'\n'
+     newline
+'\r'
+     carriage return
+'\t'
+     horizontal tab
+'\v'
+     vertical tab
+'\\'
+     backslash
+'\''
+     single quote
+'\"'
+     double quote
+'\?'
+     question mark
+'\NNN'
+     the eight-bit character whose value is the octal value NNN (one to
+     three octal digits)
+'\xHH'
+     the eight-bit character whose value is the hexadecimal value HH
+     (one or two hex digits)
+'\uHHHH'
+     the Unicode (ISO/IEC 10646) character whose value is the
+     hexadecimal value HHHH (one to four hex digits)
+'\UHHHHHHHH'
+     the Unicode (ISO/IEC 10646) character whose value is the
+     hexadecimal value HHHHHHHH (one to eight hex digits)
+'\cX'
+     a control-X character
+
+The expanded result is single-quoted, as if the dollar sign had not been
+present.
+
+
+File: bashref.info,  Node: Locale Translation,  Prev: ANSI-C Quoting,  Up: Quoting
+
+3.1.2.5 Locale-Specific Translation
+...................................
+
+A double-quoted string preceded by a dollar sign ('$') will cause the
+string to be translated according to the current locale.  The GETTEXT
+infrastructure performs the message catalog lookup and translation,
+using the 'LC_MESSAGES' and 'TEXTDOMAIN' shell variables, as explained
+below.  See the gettext documentation for additional details.  If the
+current locale is 'C' or 'POSIX', or if there are no translations
+available, the dollar sign is ignored.  If the string is translated and
+replaced, the replacement is double-quoted.
+
+   Some systems use the message catalog selected by the 'LC_MESSAGES'
+shell variable.  Others create the name of the message catalog from the
+value of the 'TEXTDOMAIN' shell variable, possibly adding a suffix of
+'.mo'.  If you use the 'TEXTDOMAIN' variable, you may need to set the
+'TEXTDOMAINDIR' variable to the location of the message catalog files.
+Still others use both variables in this fashion:
+'TEXTDOMAINDIR'/'LC_MESSAGES'/LC_MESSAGES/'TEXTDOMAIN'.mo.
+
+
+File: bashref.info,  Node: Comments,  Prev: Quoting,  Up: Shell Syntax
+
+3.1.3 Comments
+--------------
+
+In a non-interactive shell, or an interactive shell in which the
+'interactive_comments' option to the 'shopt' builtin is enabled (*note
+The Shopt Builtin::), a word beginning with '#' causes that word and all
+remaining characters on that line to be ignored.  An interactive shell
+without the 'interactive_comments' option enabled does not allow
+comments.  The 'interactive_comments' option is on by default in
+interactive shells.  *Note Interactive Shells::, for a description of
+what makes a shell interactive.
+
+
+File: bashref.info,  Node: Shell Commands,  Next: Shell Functions,  Prev: Shell Syntax,  Up: Basic Shell Features
+
+3.2 Shell Commands
+==================
+
+A simple shell command such as 'echo a b c' consists of the command
+itself followed by arguments, separated by spaces.
+
+   More complex shell commands are composed of simple commands arranged
+together in a variety of ways: in a pipeline in which the output of one
+command becomes the input of a second, in a loop or conditional
+construct, or in some other grouping.
+
+* Menu:
+
+* Reserved Words::		Words that have special meaning to the shell.
+* Simple Commands::		The most common type of command.
+* Pipelines::			Connecting the input and output of several
+				commands.
+* Lists::			How to execute commands sequentially.
+* Compound Commands::		Shell commands for control flow.
+* Coprocesses::			Two-way communication between commands.
+* GNU Parallel::		Running commands in parallel.
+
+
+File: bashref.info,  Node: Reserved Words,  Next: Simple Commands,  Up: Shell Commands
+
+3.2.1 Reserved Words
+--------------------
+
+Reserved words are words that have special meaning to the shell.  They
+are used to begin and end the shell's compound commands.
+
+   The following words are recognized as reserved when unquoted and the
+first word of a command (see below for exceptions):
+
+'if'    'then'  'elif'  'else'  'fi'      'time'
+'for'   'in'    'until' 'while' 'do'      'done'
+'case'  'esac'  'coproc''select''function'
+'{'     '}'     '[['    ']]'    '!'
+
+'in' is recognized as a reserved word if it is the third word of a
+'case' or 'select' command.  'in' and 'do' are recognized as reserved
+words if they are the third word in a 'for' command.
+
+
+File: bashref.info,  Node: Simple Commands,  Next: Pipelines,  Prev: Reserved Words,  Up: Shell Commands
+
+3.2.2 Simple Commands
+---------------------
+
+A simple command is the kind of command encountered most often.  It's
+just a sequence of words separated by 'blank's, terminated by one of the
+shell's control operators (*note Definitions::).  The first word
+generally specifies a command to be executed, with the rest of the words
+being that command's arguments.
+
+   The return status (*note Exit Status::) of a simple command is its
+exit status as provided by the POSIX 1003.1 'waitpid' function, or 128+N
+if the command was terminated by signal N.
+
+
+File: bashref.info,  Node: Pipelines,  Next: Lists,  Prev: Simple Commands,  Up: Shell Commands
+
+3.2.3 Pipelines
+---------------
+
+A 'pipeline' is a sequence of one or more commands separated by one of
+the control operators '|' or '|&'.
+
+   The format for a pipeline is
+     [time [-p]] [!] COMMAND1 [ | or |& COMMAND2 ] ...
+
+The output of each command in the pipeline is connected via a pipe to
+the input of the next command.  That is, each command reads the previous
+command's output.  This connection is performed before any redirections
+specified by the command.
+
+   If '|&' is used, COMMAND1's standard error, in addition to its
+standard output, is connected to COMMAND2's standard input through the
+pipe; it is shorthand for '2>&1 |'.  This implicit redirection of the
+standard error to the standard output is performed after any
+redirections specified by the command.
+
+   The reserved word 'time' causes timing statistics to be printed for
+the pipeline once it finishes.  The statistics currently consist of
+elapsed (wall-clock) time and user and system time consumed by the
+command's execution.  The '-p' option changes the output format to that
+specified by POSIX.  When the shell is in POSIX mode (*note Bash POSIX
+Mode::), it does not recognize 'time' as a reserved word if the next
+token begins with a '-'.  The 'TIMEFORMAT' variable may be set to a
+format string that specifies how the timing information should be
+displayed.  *Note Bash Variables::, for a description of the available
+formats.  The use of 'time' as a reserved word permits the timing of
+shell builtins, shell functions, and pipelines.  An external 'time'
+command cannot time these easily.
+
+   When the shell is in POSIX mode (*note Bash POSIX Mode::), 'time' may
+be followed by a newline.  In this case, the shell displays the total
+user and system time consumed by the shell and its children.  The
+'TIMEFORMAT' variable may be used to specify the format of the time
+information.
+
+   If the pipeline is not executed asynchronously (*note Lists::), the
+shell waits for all commands in the pipeline to complete.
+
+   Each command in a pipeline is executed in its own subshell, which is
+a separate process (*note Command Execution Environment::).  If the
+'lastpipe' option is enabled using the 'shopt' builtin (*note The Shopt
+Builtin::), the last element of a pipeline may be run by the shell
+process.
+
+   The exit status of a pipeline is the exit status of the last command
+in the pipeline, unless the 'pipefail' option is enabled (*note The Set
+Builtin::).  If 'pipefail' is enabled, the pipeline's return status is
+the value of the last (rightmost) command to exit with a non-zero
+status, or zero if all commands exit successfully.  If the reserved word
+'!' precedes the pipeline, the exit status is the logical negation of
+the exit status as described above.  The shell waits for all commands in
+the pipeline to terminate before returning a value.
+
+
+File: bashref.info,  Node: Lists,  Next: Compound Commands,  Prev: Pipelines,  Up: Shell Commands
+
+3.2.4 Lists of Commands
+-----------------------
+
+A 'list' is a sequence of one or more pipelines separated by one of the
+operators ';', '&', '&&', or '||', and optionally terminated by one of
+';', '&', or a 'newline'.
+
+   Of these list operators, '&&' and '||' have equal precedence,
+followed by ';' and '&', which have equal precedence.
+
+   A sequence of one or more newlines may appear in a 'list' to delimit
+commands, equivalent to a semicolon.
+
+   If a command is terminated by the control operator '&', the shell
+executes the command asynchronously in a subshell.  This is known as
+executing the command in the BACKGROUND, and these are referred to as
+ASYNCHRONOUS commands.  The shell does not wait for the command to
+finish, and the return status is 0 (true).  When job control is not
+active (*note Job Control::), the standard input for asynchronous
+commands, in the absence of any explicit redirections, is redirected
+from '/dev/null'.
+
+   Commands separated by a ';' are executed sequentially; the shell
+waits for each command to terminate in turn.  The return status is the
+exit status of the last command executed.
+
+   AND and OR lists are sequences of one or more pipelines separated by
+the control operators '&&' and '||', respectively.  AND and OR lists are
+executed with left associativity.
+
+   An AND list has the form
+     COMMAND1 && COMMAND2
+
+COMMAND2 is executed if, and only if, COMMAND1 returns an exit status of
+zero (success).
+
+   An OR list has the form
+     COMMAND1 || COMMAND2
+
+COMMAND2 is executed if, and only if, COMMAND1 returns a non-zero exit
+status.
+
+   The return status of AND and OR lists is the exit status of the last
+command executed in the list.
+
+
+File: bashref.info,  Node: Compound Commands,  Next: Coprocesses,  Prev: Lists,  Up: Shell Commands
+
+3.2.5 Compound Commands
+-----------------------
+
+* Menu:
+
+* Looping Constructs::		Shell commands for iterative action.
+* Conditional Constructs::	Shell commands for conditional execution.
+* Command Grouping::		Ways to group commands.
+
+Compound commands are the shell programming language constructs.  Each
+construct begins with a reserved word or control operator and is
+terminated by a corresponding reserved word or operator.  Any
+redirections (*note Redirections::) associated with a compound command
+apply to all commands within that compound command unless explicitly
+overridden.
+
+   In most cases a list of commands in a compound command's description
+may be separated from the rest of the command by one or more newlines,
+and may be followed by a newline in place of a semicolon.
+
+   Bash provides looping constructs, conditional commands, and
+mechanisms to group commands and execute them as a unit.
+
+
+File: bashref.info,  Node: Looping Constructs,  Next: Conditional Constructs,  Up: Compound Commands
+
+3.2.5.1 Looping Constructs
+..........................
+
+Bash supports the following looping constructs.
+
+   Note that wherever a ';' appears in the description of a command's
+syntax, it may be replaced with one or more newlines.
+
+'until'
+     The syntax of the 'until' command is:
+
+          until TEST-COMMANDS; do CONSEQUENT-COMMANDS; done
+
+     Execute CONSEQUENT-COMMANDS as long as TEST-COMMANDS has an exit
+     status which is not zero.  The return status is the exit status of
+     the last command executed in CONSEQUENT-COMMANDS, or zero if none
+     was executed.
+
+'while'
+     The syntax of the 'while' command is:
+
+          while TEST-COMMANDS; do CONSEQUENT-COMMANDS; done
+
+     Execute CONSEQUENT-COMMANDS as long as TEST-COMMANDS has an exit
+     status of zero.  The return status is the exit status of the last
+     command executed in CONSEQUENT-COMMANDS, or zero if none was
+     executed.
+
+'for'
+     The syntax of the 'for' command is:
+
+          for NAME [ [in [WORDS ...] ] ; ] do COMMANDS; done
+
+     Expand WORDS (*note Shell Expansions::), and execute COMMANDS once
+     for each member in the resultant list, with NAME bound to the
+     current member.  If 'in WORDS' is not present, the 'for' command
+     executes the COMMANDS once for each positional parameter that is
+     set, as if 'in "$@"' had been specified (*note Special
+     Parameters::).
+
+     The return status is the exit status of the last command that
+     executes.  If there are no items in the expansion of WORDS, no
+     commands are executed, and the return status is zero.
+
+     An alternate form of the 'for' command is also supported:
+
+          for (( EXPR1 ; EXPR2 ; EXPR3 )) ; do COMMANDS ; done
+
+     First, the arithmetic expression EXPR1 is evaluated according to
+     the rules described below (*note Shell Arithmetic::).  The
+     arithmetic expression EXPR2 is then evaluated repeatedly until it
+     evaluates to zero.  Each time EXPR2 evaluates to a non-zero value,
+     COMMANDS are executed and the arithmetic expression EXPR3 is
+     evaluated.  If any expression is omitted, it behaves as if it
+     evaluates to 1.  The return value is the exit status of the last
+     command in COMMANDS that is executed, or false if any of the
+     expressions is invalid.
+
+   The 'break' and 'continue' builtins (*note Bourne Shell Builtins::)
+may be used to control loop execution.
+
+
+File: bashref.info,  Node: Conditional Constructs,  Next: Command Grouping,  Prev: Looping Constructs,  Up: Compound Commands
+
+3.2.5.2 Conditional Constructs
+..............................
+
+'if'
+     The syntax of the 'if' command is:
+
+          if TEST-COMMANDS; then
+            CONSEQUENT-COMMANDS;
+          [elif MORE-TEST-COMMANDS; then
+            MORE-CONSEQUENTS;]
+          [else ALTERNATE-CONSEQUENTS;]
+          fi
+
+     The TEST-COMMANDS list is executed, and if its return status is
+     zero, the CONSEQUENT-COMMANDS list is executed.  If TEST-COMMANDS
+     returns a non-zero status, each 'elif' list is executed in turn,
+     and if its exit status is zero, the corresponding MORE-CONSEQUENTS
+     is executed and the command completes.  If 'else
+     ALTERNATE-CONSEQUENTS' is present, and the final command in the
+     final 'if' or 'elif' clause has a non-zero exit status, then
+     ALTERNATE-CONSEQUENTS is executed.  The return status is the exit
+     status of the last command executed, or zero if no condition tested
+     true.
+
+'case'
+     The syntax of the 'case' command is:
+
+          case WORD in
+              [ [(] PATTERN [| PATTERN]...) COMMAND-LIST ;;]...
+          esac
+
+     'case' will selectively execute the COMMAND-LIST corresponding to
+     the first PATTERN that matches WORD.  The match is performed
+     according to the rules described below in *note Pattern Matching::.
+     If the 'nocasematch' shell option (see the description of 'shopt'
+     in *note The Shopt Builtin::) is enabled, the match is performed
+     without regard to the case of alphabetic characters.  The '|' is
+     used to separate multiple patterns, and the ')' operator terminates
+     a pattern list.  A list of patterns and an associated command-list
+     is known as a CLAUSE.
+
+     Each clause must be terminated with ';;', ';&', or ';;&'.  The WORD
+     undergoes tilde expansion, parameter expansion, command
+     substitution, arithmetic expansion, and quote removal (*note Shell
+     Parameter Expansion::) before matching is attempted.  Each PATTERN
+     undergoes tilde expansion, parameter expansion, command
+     substitution, and arithmetic expansion.
+
+     There may be an arbitrary number of 'case' clauses, each terminated
+     by a ';;', ';&', or ';;&'.  The first pattern that matches
+     determines the command-list that is executed.  It's a common idiom
+     to use '*' as the final pattern to define the default case, since
+     that pattern will always match.
+
+     Here is an example using 'case' in a script that could be used to
+     describe one interesting feature of an animal:
+
+          echo -n "Enter the name of an animal: "
+          read ANIMAL
+          echo -n "The $ANIMAL has "
+          case $ANIMAL in
+            horse | dog | cat) echo -n "four";;
+            man | kangaroo ) echo -n "two";;
+            *) echo -n "an unknown number of";;
+          esac
+          echo " legs."
+
+
+     If the ';;' operator is used, no subsequent matches are attempted
+     after the first pattern match.  Using ';&' in place of ';;' causes
+     execution to continue with the COMMAND-LIST associated with the
+     next clause, if any.  Using ';;&' in place of ';;' causes the shell
+     to test the patterns in the next clause, if any, and execute any
+     associated COMMAND-LIST on a successful match, continuing the case
+     statement execution as if the pattern list had not matched.
+
+     The return status is zero if no PATTERN is matched.  Otherwise, the
+     return status is the exit status of the COMMAND-LIST executed.
+
+'select'
+
+     The 'select' construct allows the easy generation of menus.  It has
+     almost the same syntax as the 'for' command:
+
+          select NAME [in WORDS ...]; do COMMANDS; done
+
+     The list of words following 'in' is expanded, generating a list of
+     items.  The set of expanded words is printed on the standard error
+     output stream, each preceded by a number.  If the 'in WORDS' is
+     omitted, the positional parameters are printed, as if 'in "$@"' had
+     been specified.  The 'PS3' prompt is then displayed and a line is
+     read from the standard input.  If the line consists of a number
+     corresponding to one of the displayed words, then the value of NAME
+     is set to that word.  If the line is empty, the words and prompt
+     are displayed again.  If 'EOF' is read, the 'select' command
+     completes.  Any other value read causes NAME to be set to null.
+     The line read is saved in the variable 'REPLY'.
+
+     The COMMANDS are executed after each selection until a 'break'
+     command is executed, at which point the 'select' command completes.
+
+     Here is an example that allows the user to pick a filename from the
+     current directory, and displays the name and index of the file
+     selected.
+
+          select fname in *;
+          do
+          	echo you picked $fname \($REPLY\)
+          	break;
+          done
+
+'((...))'
+          (( EXPRESSION ))
+
+     The arithmetic EXPRESSION is evaluated according to the rules
+     described below (*note Shell Arithmetic::).  If the value of the
+     expression is non-zero, the return status is 0; otherwise the
+     return status is 1.  This is exactly equivalent to
+          let "EXPRESSION"
+     *Note Bash Builtins::, for a full description of the 'let' builtin.
+
+'[[...]]'
+          [[ EXPRESSION ]]
+
+     Return a status of 0 or 1 depending on the evaluation of the
+     conditional expression EXPRESSION.  Expressions are composed of the
+     primaries described below in *note Bash Conditional Expressions::.
+     Word splitting and filename expansion are not performed on the
+     words between the '[[' and ']]'; tilde expansion, parameter and
+     variable expansion, arithmetic expansion, command substitution,
+     process substitution, and quote removal are performed.  Conditional
+     operators such as '-f' must be unquoted to be recognized as
+     primaries.
+
+     When used with '[[', the '<' and '>' operators sort
+     lexicographically using the current locale.
+
+     When the '==' and '!=' operators are used, the string to the right
+     of the operator is considered a pattern and matched according to
+     the rules described below in *note Pattern Matching::, as if the
+     'extglob' shell option were enabled.  The '=' operator is identical
+     to '=='.  If the 'nocasematch' shell option (see the description of
+     'shopt' in *note The Shopt Builtin::) is enabled, the match is
+     performed without regard to the case of alphabetic characters.  The
+     return value is 0 if the string matches ('==') or does not match
+     ('!=') the pattern, and 1 otherwise.  Any part of the pattern may
+     be quoted to force the quoted portion to be matched as a string.
+
+     An additional binary operator, '=~', is available, with the same
+     precedence as '==' and '!='.  When it is used, the string to the
+     right of the operator is considered a POSIX extended regular
+     expression and matched accordingly (using the POSIX 'regcomp' and
+     'regexec' interfaces usually described in regex(3)).  The return
+     value is 0 if the string matches the pattern, and 1 otherwise.  If
+     the regular expression is syntactically incorrect, the conditional
+     expression's return value is 2.  If the 'nocasematch' shell option
+     (see the description of 'shopt' in *note The Shopt Builtin::) is
+     enabled, the match is performed without regard to the case of
+     alphabetic characters.  Any part of the pattern may be quoted to
+     force the quoted portion to be matched as a string.  Bracket
+     expressions in regular expressions must be treated carefully, since
+     normal quoting characters lose their meanings between brackets.  If
+     the pattern is stored in a shell variable, quoting the variable
+     expansion forces the entire pattern to be matched as a string.
+
+     The pattern will match if it matches any part of the string.
+     Anchor the pattern using the '^' and '$' regular expression
+     operators to force it to match the entire string.  The array
+     variable 'BASH_REMATCH' records which parts of the string matched
+     the pattern.  The element of 'BASH_REMATCH' with index 0 contains
+     the portion of the string matching the entire regular expression.
+     Substrings matched by parenthesized subexpressions within the
+     regular expression are saved in the remaining 'BASH_REMATCH'
+     indices.  The element of 'BASH_REMATCH' with index N is the portion
+     of the string matching the Nth parenthesized subexpression.
+
+     For example, the following will match a line (stored in the shell
+     variable LINE) if there is a sequence of characters anywhere in the
+     value consisting of any number, including zero, of characters in
+     the 'space' character class, zero or one instances of 'a', then a
+     'b':
+          [[ $line =~ [[:space:]]*(a)?b ]]
+
+     That means values like 'aab' and ' aaaaaab' will match, as will a
+     line containing a 'b' anywhere in its value.
+
+     Storing the regular expression in a shell variable is often a
+     useful way to avoid problems with quoting characters that are
+     special to the shell.  It is sometimes difficult to specify a
+     regular expression literally without using quotes, or to keep track
+     of the quoting used by regular expressions while paying attention
+     to the shell's quote removal.  Using a shell variable to store the
+     pattern decreases these problems.  For example, the following is
+     equivalent to the above:
+          pattern='[[:space:]]*(a)?b'
+          [[ $line =~ $pattern ]]
+
+     If you want to match a character that's special to the regular
+     expression grammar, it has to be quoted to remove its special
+     meaning.  This means that in the pattern 'xxx.txt', the '.' matches
+     any character in the string (its usual regular expression meaning),
+     but in the pattern '"xxx.txt"' it can only match a literal '.'.
+     Shell programmers should take special care with backslashes, since
+     backslashes are used both by the shell and regular expressions to
+     remove the special meaning from the following character.  The
+     following two sets of commands are _not_ equivalent:
+          pattern='\.'
+
+          [[ . =~ $pattern ]]
+          [[ . =~ \. ]]
+
+          [[ . =~ "$pattern" ]]
+          [[ . =~ '\.' ]]
+
+     The first two matches will succeed, but the second two will not,
+     because in the second two the backslash will be part of the pattern
+     to be matched.  In the first two examples, the backslash removes
+     the special meaning from '.', so the literal '.' matches.  If the
+     string in the first examples were anything other than '.', say 'a',
+     the pattern would not match, because the quoted '.' in the pattern
+     loses its special meaning of matching any single character.
+
+     Expressions may be combined using the following operators, listed
+     in decreasing order of precedence:
+
+     '( EXPRESSION )'
+          Returns the value of EXPRESSION.  This may be used to override
+          the normal precedence of operators.
+
+     '! EXPRESSION'
+          True if EXPRESSION is false.
+
+     'EXPRESSION1 && EXPRESSION2'
+          True if both EXPRESSION1 and EXPRESSION2 are true.
+
+     'EXPRESSION1 || EXPRESSION2'
+          True if either EXPRESSION1 or EXPRESSION2 is true.
+
+     The '&&' and '||' operators do not evaluate EXPRESSION2 if the
+     value of EXPRESSION1 is sufficient to determine the return value of
+     the entire conditional expression.
+
+
+File: bashref.info,  Node: Command Grouping,  Prev: Conditional Constructs,  Up: Compound Commands
+
+3.2.5.3 Grouping Commands
+.........................
+
+Bash provides two ways to group a list of commands to be executed as a
+unit.  When commands are grouped, redirections may be applied to the
+entire command list.  For example, the output of all the commands in the
+list may be redirected to a single stream.
+
+'()'
+          ( LIST )
+
+     Placing a list of commands between parentheses causes a subshell
+     environment to be created (*note Command Execution Environment::),
+     and each of the commands in LIST to be executed in that subshell.
+     Since the LIST is executed in a subshell, variable assignments do
+     not remain in effect after the subshell completes.
+
+'{}'
+          { LIST; }
+
+     Placing a list of commands between curly braces causes the list to
+     be executed in the current shell context.  No subshell is created.
+     The semicolon (or newline) following LIST is required.
+
+   In addition to the creation of a subshell, there is a subtle
+difference between these two constructs due to historical reasons.  The
+braces are 'reserved words', so they must be separated from the LIST by
+'blank's or other shell metacharacters.  The parentheses are
+'operators', and are recognized as separate tokens by the shell even if
+they are not separated from the LIST by whitespace.
+
+   The exit status of both of these constructs is the exit status of
+LIST.
+
+
+File: bashref.info,  Node: Coprocesses,  Next: GNU Parallel,  Prev: Compound Commands,  Up: Shell Commands
+
+3.2.6 Coprocesses
+-----------------
+
+A 'coprocess' is a shell command preceded by the 'coproc' reserved word.
+A coprocess is executed asynchronously in a subshell, as if the command
+had been terminated with the '&' control operator, with a two-way pipe
+established between the executing shell and the coprocess.
+
+   The format for a coprocess is:
+     coproc [NAME] COMMAND [REDIRECTIONS]
+
+This creates a coprocess named NAME.  If NAME is not supplied, the
+default name is COPROC.  NAME must not be supplied if COMMAND is a
+simple command (*note Simple Commands::); otherwise, it is interpreted
+as the first word of the simple command.
+
+   When the coprocess is executed, the shell creates an array variable
+(*note Arrays::) named 'NAME' in the context of the executing shell.
+The standard output of COMMAND is connected via a pipe to a file
+descriptor in the executing shell, and that file descriptor is assigned
+to 'NAME'[0].  The standard input of COMMAND is connected via a pipe to
+a file descriptor in the executing shell, and that file descriptor is
+assigned to 'NAME'[1].  This pipe is established before any redirections
+specified by the command (*note Redirections::).  The file descriptors
+can be utilized as arguments to shell commands and redirections using
+standard word expansions.  Other than those created to execute command
+and process substitutions, the file descriptors are not available in
+subshells.
+
+   The process ID of the shell spawned to execute the coprocess is
+available as the value of the variable 'NAME'_PID. The 'wait' builtin
+command may be used to wait for the coprocess to terminate.
+
+   Since the coprocess is created as an asynchronous command, the
+'coproc' command always returns success.  The return status of a
+coprocess is the exit status of COMMAND.
+
+
+File: bashref.info,  Node: GNU Parallel,  Prev: Coprocesses,  Up: Shell Commands
+
+3.2.7 GNU Parallel
+------------------
+
+There are ways to run commands in parallel that are not built into Bash.
+GNU Parallel is a tool to do just that.
+
+   GNU Parallel, as its name suggests, can be used to build and run
+commands in parallel.  You may run the same command with different
+arguments, whether they are filenames, usernames, hostnames, or lines
+read from files.  GNU Parallel provides shorthand references to many of
+the most common operations (input lines, various portions of the input
+line, different ways to specify the input source, and so on).  Parallel
+can replace 'xargs' or feed commands from its input sources to several
+different instances of Bash.
+
+   For a complete description, refer to the GNU Parallel documentation.
+A few examples should provide a brief introduction to its use.
+
+   For example, it is easy to replace 'xargs' to gzip all html files in
+the current directory and its subdirectories:
+     find . -type f -name '*.html' -print | parallel gzip
+If you need to protect special characters such as newlines in file
+names, use find's '-print0' option and parallel's '-0' option.
+
+   You can use Parallel to move files from the current directory when
+the number of files is too large to process with one 'mv' invocation:
+     printf '%s\n' * | parallel mv {} destdir
+
+   As you can see, the {} is replaced with each line read from standard
+input.  While using 'ls' will work in most instances, it is not
+sufficient to deal with all filenames.  'printf' is a shell builtin, and
+therefore is not subject to the kernel's limit on the number of
+arguments to a program, so you can use '*' (but see below about the
+'dotglob' shell option).  If you need to accommodate special characters
+in filenames, you can use
+
+     printf '%s\0' * | parallel -0 mv {} destdir
+
+as alluded to above.
+
+   This will run as many 'mv' commands as there are files in the current
+directory.  You can emulate a parallel 'xargs' by adding the '-X'
+option:
+     printf '%s\0' * | parallel -0 -X mv {} destdir
+
+   (You may have to modify the pattern if you have the 'dotglob' option
+enabled.)
+
+   GNU Parallel can replace certain common idioms that operate on lines
+read from a file (in this case, filenames listed one per line):
+     	while IFS= read -r x; do
+     		do-something1 "$x" "config-$x"
+     		do-something2 < "$x"
+     	done < file | process-output
+
+with a more compact syntax reminiscent of lambdas:
+     cat list | parallel "do-something1 {} config-{} ; do-something2 < {}" |
+                process-output
+
+   Parallel provides a built-in mechanism to remove filename extensions,
+which lends itself to batch file transformations or renaming:
+     ls *.gz | parallel -j+0 "zcat {} | bzip2 >{.}.bz2 && rm {}"
+This will recompress all files in the current directory with names
+ending in .gz using bzip2, running one job per CPU (-j+0) in parallel.
+(We use 'ls' for brevity here; using 'find' as above is more robust in
+the face of filenames containing unexpected characters.)  Parallel can
+take arguments from the command line; the above can also be written as
+
+     parallel "zcat {} | bzip2 >{.}.bz2 && rm {}" ::: *.gz
+
+   If a command generates output, you may want to preserve the input
+order in the output.  For instance, the following command
+     {
+         echo foss.org.my ;
+         echo debian.org ;
+         echo freenetproject.org ;
+     } | parallel traceroute
+will display as output the traceroute invocation that finishes first.
+Adding the '-k' option
+     {
+         echo foss.org.my ;
+         echo debian.org ;
+         echo freenetproject.org ;
+     } | parallel -k traceroute
+will ensure that the output of 'traceroute foss.org.my' is displayed
+first.
+
+   Finally, Parallel can be used to run a sequence of shell commands in
+parallel, similar to 'cat file | bash'.  It is not uncommon to take a
+list of filenames, create a series of shell commands to operate on them,
+and feed that list of commands to a shell.  Parallel can speed this up.
+Assuming that 'file' contains a list of shell commands, one per line,
+
+     parallel -j 10 < file
+
+will evaluate the commands using the shell (since no explicit command is
+supplied as an argument), in blocks of ten shell jobs at a time.
+
+
+File: bashref.info,  Node: Shell Functions,  Next: Shell Parameters,  Prev: Shell Commands,  Up: Basic Shell Features
+
+3.3 Shell Functions
+===================
+
+Shell functions are a way to group commands for later execution using a
+single name for the group.  They are executed just like a "regular"
+command.  When the name of a shell function is used as a simple command
+name, the list of commands associated with that function name is
+executed.  Shell functions are executed in the current shell context; no
+new process is created to interpret them.
+
+   Functions are declared using this syntax:
+     FNAME () COMPOUND-COMMAND [ REDIRECTIONS ]
+
+   or
+
+     function FNAME [()] COMPOUND-COMMAND [ REDIRECTIONS ]
+
+   This defines a shell function named FNAME.  The reserved word
+'function' is optional.  If the 'function' reserved word is supplied,
+the parentheses are optional.  The BODY of the function is the compound
+command COMPOUND-COMMAND (*note Compound Commands::).  That command is
+usually a LIST enclosed between { and }, but may be any compound command
+listed above, with one exception: If the 'function' reserved word is
+used, but the parentheses are not supplied, the braces are required.
+COMPOUND-COMMAND is executed whenever FNAME is specified as the name of
+a command.  When the shell is in POSIX mode (*note Bash POSIX Mode::),
+FNAME must be a valid shell NAME and may not be the same as one of the
+special builtins (*note Special Builtins::).  In default mode, a
+function name can be any unquoted shell word that does not contain '$'.
+Any redirections (*note Redirections::) associated with the shell
+function are performed when the function is executed.  A function
+definition may be deleted using the '-f' option to the 'unset' builtin
+(*note Bourne Shell Builtins::).
+
+   The exit status of a function definition is zero unless a syntax
+error occurs or a readonly function with the same name already exists.
+When executed, the exit status of a function is the exit status of the
+last command executed in the body.
+
+   Note that for historical reasons, in the most common usage the curly
+braces that surround the body of the function must be separated from the
+body by 'blank's or newlines.  This is because the braces are reserved
+words and are only recognized as such when they are separated from the
+command list by whitespace or another shell metacharacter.  Also, when
+using the braces, the LIST must be terminated by a semicolon, a '&', or
+a newline.
+
+   When a function is executed, the arguments to the function become the
+positional parameters during its execution (*note Positional
+Parameters::).  The special parameter '#' that expands to the number of
+positional parameters is updated to reflect the change.  Special
+parameter '0' is unchanged.  The first element of the 'FUNCNAME'
+variable is set to the name of the function while the function is
+executing.
+
+   All other aspects of the shell execution environment are identical
+between a function and its caller with these exceptions: the 'DEBUG' and
+'RETURN' traps are not inherited unless the function has been given the
+'trace' attribute using the 'declare' builtin or the '-o functrace'
+option has been enabled with the 'set' builtin, (in which case all
+functions inherit the 'DEBUG' and 'RETURN' traps), and the 'ERR' trap is
+not inherited unless the '-o errtrace' shell option has been enabled.
+*Note Bourne Shell Builtins::, for the description of the 'trap'
+builtin.
+
+   The 'FUNCNEST' variable, if set to a numeric value greater than 0,
+defines a maximum function nesting level.  Function invocations that
+exceed the limit cause the entire command to abort.
+
+   If the builtin command 'return' is executed in a function, the
+function completes and execution resumes with the next command after the
+function call.  Any command associated with the 'RETURN' trap is
+executed before execution resumes.  When a function completes, the
+values of the positional parameters and the special parameter '#' are
+restored to the values they had prior to the function's execution.  If a
+numeric argument is given to 'return', that is the function's return
+status; otherwise the function's return status is the exit status of the
+last command executed before the 'return'.
+
+   Variables local to the function may be declared with the 'local'
+builtin.  These variables are visible only to the function and the
+commands it invokes.  This is particularly important when a shell
+function calls other functions.
+
+   Local variables "shadow" variables with the same name declared at
+previous scopes.  For instance, a local variable declared in a function
+hides a global variable of the same name: references and assignments
+refer to the local variable, leaving the global variable unmodified.
+When the function returns, the global variable is once again visible.
+
+   The shell uses DYNAMIC SCOPING to control a variable's visibility
+within functions.  With dynamic scoping, visible variables and their
+values are a result of the sequence of function calls that caused
+execution to reach the current function.  The value of a variable that a
+function sees depends on its value within its caller, if any, whether
+that caller is the "global" scope or another shell function.  This is
+also the value that a local variable declaration "shadows", and the
+value that is restored when the function returns.
+
+   For example, if a variable VAR is declared as local in function
+FUNC1, and FUNC1 calls another function FUNC2, references to VAR made
+from within FUNC2 will resolve to the local variable VAR from FUNC1,
+shadowing any global variable named VAR.
+
+   The following script demonstrates this behavior.  When executed, the
+script displays
+
+     In func2, var = func1 local
+
+     func1()
+     {
+         local var='func1 local'
+         func2
+     }
+
+     func2()
+     {
+         echo "In func2, var = $var"
+     }
+
+     var=global
+     func1
+
+   The 'unset' builtin also acts using the same dynamic scope: if a
+variable is local to the current scope, 'unset' will unset it; otherwise
+the unset will refer to the variable found in any calling scope as
+described above.  If a variable at the current local scope is unset, it
+will remain so until it is reset in that scope or until the function
+returns.  Once the function returns, any instance of the variable at a
+previous scope will become visible.  If the unset acts on a variable at
+a previous scope, any instance of a variable with that name that had
+been shadowed will become visible.
+
+   Function names and definitions may be listed with the '-f' option to
+the 'declare' ('typeset') builtin command (*note Bash Builtins::).  The
+'-F' option to 'declare' or 'typeset' will list the function names only
+(and optionally the source file and line number, if the 'extdebug' shell
+option is enabled).  Functions may be exported so that subshells
+automatically have them defined with the '-f' option to the 'export'
+builtin (*note Bourne Shell Builtins::).
+
+   Functions may be recursive.  The 'FUNCNEST' variable may be used to
+limit the depth of the function call stack and restrict the number of
+function invocations.  By default, no limit is placed on the number of
+recursive calls.
+
+
+File: bashref.info,  Node: Shell Parameters,  Next: Shell Expansions,  Prev: Shell Functions,  Up: Basic Shell Features
+
+3.4 Shell Parameters
+====================
+
+* Menu:
+
+* Positional Parameters::	The shell's command-line arguments.
+* Special Parameters::		Parameters denoted by special characters.
+
+A PARAMETER is an entity that stores values.  It can be a 'name', a
+number, or one of the special characters listed below.  A VARIABLE is a
+parameter denoted by a 'name'.  A variable has a VALUE and zero or more
+ATTRIBUTES.  Attributes are assigned using the 'declare' builtin command
+(see the description of the 'declare' builtin in *note Bash Builtins::).
+
+   A parameter is set if it has been assigned a value.  The null string
+is a valid value.  Once a variable is set, it may be unset only by using
+the 'unset' builtin command.
+
+   A variable may be assigned to by a statement of the form
+     NAME=[VALUE]
+If VALUE is not given, the variable is assigned the null string.  All
+VALUEs undergo tilde expansion, parameter and variable expansion,
+command substitution, arithmetic expansion, and quote removal (detailed
+below).  If the variable has its 'integer' attribute set, then VALUE is
+evaluated as an arithmetic expression even if the '$((...))' expansion
+is not used (*note Arithmetic Expansion::).  Word splitting is not
+performed, with the exception of '"$@"' as explained below.  Filename
+expansion is not performed.  Assignment statements may also appear as
+arguments to the 'alias', 'declare', 'typeset', 'export', 'readonly',
+and 'local' builtin commands (DECLARATION commands).  When in POSIX mode
+(*note Bash POSIX Mode::), these builtins may appear in a command after
+one or more instances of the 'command' builtin and retain these
+assignment statement properties.
+
+   In the context where an assignment statement is assigning a value to
+a shell variable or array index (*note Arrays::), the '+=' operator can
+be used to append to or add to the variable's previous value.  This
+includes arguments to builtin commands such as 'declare' that accept
+assignment statements (DECLARATION commands).  When '+=' is applied to a
+variable for which the INTEGER attribute has been set, VALUE is
+evaluated as an arithmetic expression and added to the variable's
+current value, which is also evaluated.  When '+=' is applied to an
+array variable using compound assignment (*note Arrays::), the
+variable's value is not unset (as it is when using '='), and new values
+are appended to the array beginning at one greater than the array's
+maximum index (for indexed arrays), or added as additional key-value
+pairs in an associative array.  When applied to a string-valued
+variable, VALUE is expanded and appended to the variable's value.
+
+   A variable can be assigned the NAMEREF attribute using the '-n'
+option to the 'declare' or 'local' builtin commands (*note Bash
+Builtins::) to create a NAMEREF, or a reference to another variable.
+This allows variables to be manipulated indirectly.  Whenever the
+nameref variable is referenced, assigned to, unset, or has its
+attributes modified (other than using or changing the nameref attribute
+itself), the operation is actually performed on the variable specified
+by the nameref variable's value.  A nameref is commonly used within
+shell functions to refer to a variable whose name is passed as an
+argument to the function.  For instance, if a variable name is passed to
+a shell function as its first argument, running
+     declare -n ref=$1
+inside the function creates a nameref variable REF whose value is the
+variable name passed as the first argument.  References and assignments
+to REF, and changes to its attributes, are treated as references,
+assignments, and attribute modifications to the variable whose name was
+passed as '$1'.
+
+   If the control variable in a 'for' loop has the nameref attribute,
+the list of words can be a list of shell variables, and a name reference
+will be established for each word in the list, in turn, when the loop is
+executed.  Array variables cannot be given the nameref attribute.
+However, nameref variables can reference array variables and subscripted
+array variables.  Namerefs can be unset using the '-n' option to the
+'unset' builtin (*note Bourne Shell Builtins::).  Otherwise, if 'unset'
+is executed with the name of a nameref variable as an argument, the
+variable referenced by the nameref variable will be unset.
+
+
+File: bashref.info,  Node: Positional Parameters,  Next: Special Parameters,  Up: Shell Parameters
+
+3.4.1 Positional Parameters
+---------------------------
+
+A POSITIONAL PARAMETER is a parameter denoted by one or more digits,
+other than the single digit '0'.  Positional parameters are assigned
+from the shell's arguments when it is invoked, and may be reassigned
+using the 'set' builtin command.  Positional parameter 'N' may be
+referenced as '${N}', or as '$N' when 'N' consists of a single digit.
+Positional parameters may not be assigned to with assignment statements.
+The 'set' and 'shift' builtins are used to set and unset them (*note
+Shell Builtin Commands::).  The positional parameters are temporarily
+replaced when a shell function is executed (*note Shell Functions::).
+
+   When a positional parameter consisting of more than a single digit is
+expanded, it must be enclosed in braces.
+
+
+File: bashref.info,  Node: Special Parameters,  Prev: Positional Parameters,  Up: Shell Parameters
+
+3.4.2 Special Parameters
+------------------------
+
+The shell treats several parameters specially.  These parameters may
+only be referenced; assignment to them is not allowed.
+
+'*'
+     ($*) Expands to the positional parameters, starting from one.  When
+     the expansion is not within double quotes, each positional
+     parameter expands to a separate word.  In contexts where it is
+     performed, those words are subject to further word splitting and
+     filename expansion.  When the expansion occurs within double
+     quotes, it expands to a single word with the value of each
+     parameter separated by the first character of the 'IFS' special
+     variable.  That is, '"$*"' is equivalent to '"$1C$2C..."', where C
+     is the first character of the value of the 'IFS' variable.  If
+     'IFS' is unset, the parameters are separated by spaces.  If 'IFS'
+     is null, the parameters are joined without intervening separators.
+
+'@'
+     ($@) Expands to the positional parameters, starting from one.  In
+     contexts where word splitting is performed, this expands each
+     positional parameter to a separate word; if not within double
+     quotes, these words are subject to word splitting.  In contexts
+     where word splitting is not performed, this expands to a single
+     word with each positional parameter separated by a space.  When the
+     expansion occurs within double quotes, and word splitting is
+     performed, each parameter expands to a separate word.  That is,
+     '"$@"' is equivalent to '"$1" "$2" ...'.  If the double-quoted
+     expansion occurs within a word, the expansion of the first
+     parameter is joined with the beginning part of the original word,
+     and the expansion of the last parameter is joined with the last
+     part of the original word.  When there are no positional
+     parameters, '"$@"' and '$@' expand to nothing (i.e., they are
+     removed).
+
+'#'
+     ($#) Expands to the number of positional parameters in decimal.
+
+'?'
+     ($?)  Expands to the exit status of the most recently executed
+     foreground pipeline.
+
+'-'
+     ($-, a hyphen.)  Expands to the current option flags as specified
+     upon invocation, by the 'set' builtin command, or those set by the
+     shell itself (such as the '-i' option).
+
+'$'
+     ($$) Expands to the process ID of the shell.  In a '()' subshell,
+     it expands to the process ID of the invoking shell, not the
+     subshell.
+
+'!'
+     ($!)  Expands to the process ID of the job most recently placed
+     into the background, whether executed as an asynchronous command or
+     using the 'bg' builtin (*note Job Control Builtins::).
+
+'0'
+     ($0) Expands to the name of the shell or shell script.  This is set
+     at shell initialization.  If Bash is invoked with a file of
+     commands (*note Shell Scripts::), '$0' is set to the name of that
+     file.  If Bash is started with the '-c' option (*note Invoking
+     Bash::), then '$0' is set to the first argument after the string to
+     be executed, if one is present.  Otherwise, it is set to the
+     filename used to invoke Bash, as given by argument zero.
+
+
+File: bashref.info,  Node: Shell Expansions,  Next: Redirections,  Prev: Shell Parameters,  Up: Basic Shell Features
+
+3.5 Shell Expansions
+====================
+
+Expansion is performed on the command line after it has been split into
+'token's.  There are seven kinds of expansion performed:
+
+   * brace expansion
+   * tilde expansion
+   * parameter and variable expansion
+   * command substitution
+   * arithmetic expansion
+   * word splitting
+   * filename expansion
+
+* Menu:
+
+* Brace Expansion::		Expansion of expressions within braces.
+* Tilde Expansion::		Expansion of the ~ character.
+* Shell Parameter Expansion::	How Bash expands variables to their values.
+* Command Substitution::	Using the output of a command as an argument.
+* Arithmetic Expansion::	How to use arithmetic in shell expansions.
+* Process Substitution::	A way to write and read to and from a
+				command.
+* Word Splitting::	How the results of expansion are split into separate
+			arguments.
+* Filename Expansion::	A shorthand for specifying filenames matching patterns.
+* Quote Removal::	How and when quote characters are removed from
+			words.
+
+   The order of expansions is: brace expansion; tilde expansion,
+parameter and variable expansion, arithmetic expansion, and command
+substitution (done in a left-to-right fashion); word splitting; and
+filename expansion.
+
+   On systems that can support it, there is an additional expansion
+available: PROCESS SUBSTITUTION.  This is performed at the same time as
+tilde, parameter, variable, and arithmetic expansion and command
+substitution.
+
+   After these expansions are performed, quote characters present in the
+original word are removed unless they have been quoted themselves (QUOTE
+REMOVAL).
+
+   Only brace expansion, word splitting, and filename expansion can
+increase the number of words of the expansion; other expansions expand a
+single word to a single word.  The only exceptions to this are the
+expansions of '"$@"' and '$*' (*note Special Parameters::), and
+'"${NAME[@]}"' and '${NAME[*]}' (*note Arrays::).
+
+   After all expansions, 'quote removal' (*note Quote Removal::) is
+performed.
+
+
+File: bashref.info,  Node: Brace Expansion,  Next: Tilde Expansion,  Up: Shell Expansions
+
+3.5.1 Brace Expansion
+---------------------
+
+Brace expansion is a mechanism by which arbitrary strings may be
+generated.  This mechanism is similar to FILENAME EXPANSION (*note
+Filename Expansion::), but the filenames generated need not exist.
+Patterns to be brace expanded take the form of an optional PREAMBLE,
+followed by either a series of comma-separated strings or a sequence
+expression between a pair of braces, followed by an optional POSTSCRIPT.
+The preamble is prefixed to each string contained within the braces, and
+the postscript is then appended to each resulting string, expanding left
+to right.
+
+   Brace expansions may be nested.  The results of each expanded string
+are not sorted; left to right order is preserved.  For example,
+     bash$ echo a{d,c,b}e
+     ade ace abe
+
+   A sequence expression takes the form '{X..Y[..INCR]}', where X and Y
+are either integers or single characters, and INCR, an optional
+increment, is an integer.  When integers are supplied, the expression
+expands to each number between X and Y, inclusive.  Supplied integers
+may be prefixed with '0' to force each term to have the same width.
+When either X or Y begins with a zero, the shell attempts to force all
+generated terms to contain the same number of digits, zero-padding where
+necessary.  When characters are supplied, the expression expands to each
+character lexicographically between X and Y, inclusive, using the
+default C locale.  Note that both X and Y must be of the same type.
+When the increment is supplied, it is used as the difference between
+each term.  The default increment is 1 or -1 as appropriate.
+
+   Brace expansion is performed before any other expansions, and any
+characters special to other expansions are preserved in the result.  It
+is strictly textual.  Bash does not apply any syntactic interpretation
+to the context of the expansion or the text between the braces.
+
+   A correctly-formed brace expansion must contain unquoted opening and
+closing braces, and at least one unquoted comma or a valid sequence
+expression.  Any incorrectly formed brace expansion is left unchanged.
+
+   A { or ',' may be quoted with a backslash to prevent its being
+considered part of a brace expression.  To avoid conflicts with
+parameter expansion, the string '${' is not considered eligible for
+brace expansion, and inhibits brace expansion until the closing '}'.
+
+   This construct is typically used as shorthand when the common prefix
+of the strings to be generated is longer than in the above example:
+     mkdir /usr/local/src/bash/{old,new,dist,bugs}
+   or
+     chown root /usr/{ucb/{ex,edit},lib/{ex?.?*,how_ex}}
+
+
+File: bashref.info,  Node: Tilde Expansion,  Next: Shell Parameter Expansion,  Prev: Brace Expansion,  Up: Shell Expansions
+
+3.5.2 Tilde Expansion
+---------------------
+
+If a word begins with an unquoted tilde character ('~'), all of the
+characters up to the first unquoted slash (or all characters, if there
+is no unquoted slash) are considered a TILDE-PREFIX.  If none of the
+characters in the tilde-prefix are quoted, the characters in the
+tilde-prefix following the tilde are treated as a possible LOGIN NAME.
+If this login name is the null string, the tilde is replaced with the
+value of the 'HOME' shell variable.  If 'HOME' is unset, the home
+directory of the user executing the shell is substituted instead.
+Otherwise, the tilde-prefix is replaced with the home directory
+associated with the specified login name.
+
+   If the tilde-prefix is '~+', the value of the shell variable 'PWD'
+replaces the tilde-prefix.  If the tilde-prefix is '~-', the value of
+the shell variable 'OLDPWD', if it is set, is substituted.
+
+   If the characters following the tilde in the tilde-prefix consist of
+a number N, optionally prefixed by a '+' or a '-', the tilde-prefix is
+replaced with the corresponding element from the directory stack, as it
+would be displayed by the 'dirs' builtin invoked with the characters
+following tilde in the tilde-prefix as an argument (*note The Directory
+Stack::).  If the tilde-prefix, sans the tilde, consists of a number
+without a leading '+' or '-', '+' is assumed.
+
+   If the login name is invalid, or the tilde expansion fails, the word
+is left unchanged.
+
+   Each variable assignment is checked for unquoted tilde-prefixes
+immediately following a ':' or the first '='.  In these cases, tilde
+expansion is also performed.  Consequently, one may use filenames with
+tildes in assignments to 'PATH', 'MAILPATH', and 'CDPATH', and the shell
+assigns the expanded value.
+
+   The following table shows how Bash treats unquoted tilde-prefixes:
+
+'~'
+     The value of '$HOME'
+'~/foo'
+     '$HOME/foo'
+
+'~fred/foo'
+     The subdirectory 'foo' of the home directory of the user 'fred'
+
+'~+/foo'
+     '$PWD/foo'
+
+'~-/foo'
+     '${OLDPWD-'~-'}/foo'
+
+'~N'
+     The string that would be displayed by 'dirs +N'
+
+'~+N'
+     The string that would be displayed by 'dirs +N'
+
+'~-N'
+     The string that would be displayed by 'dirs -N'
+
+   Bash also performs tilde expansion on words satisfying the conditions
+of variable assignments (*note Shell Parameters::) when they appear as
+arguments to simple commands.  Bash does not do this, except for the
+DECLARATION commands listed above, when in POSIX mode.
+
+
+File: bashref.info,  Node: Shell Parameter Expansion,  Next: Command Substitution,  Prev: Tilde Expansion,  Up: Shell Expansions
+
+3.5.3 Shell Parameter Expansion
+-------------------------------
+
+The '$' character introduces parameter expansion, command substitution,
+or arithmetic expansion.  The parameter name or symbol to be expanded
+may be enclosed in braces, which are optional but serve to protect the
+variable to be expanded from characters immediately following it which
+could be interpreted as part of the name.
+
+   When braces are used, the matching ending brace is the first '}' not
+escaped by a backslash or within a quoted string, and not within an
+embedded arithmetic expansion, command substitution, or parameter
+expansion.
+
+   The basic form of parameter expansion is ${PARAMETER}.  The value of
+PARAMETER is substituted.  The PARAMETER is a shell parameter as
+described above (*note Shell Parameters::) or an array reference (*note
+Arrays::).  The braces are required when PARAMETER is a positional
+parameter with more than one digit, or when PARAMETER is followed by a
+character that is not to be interpreted as part of its name.
+
+   If the first character of PARAMETER is an exclamation point (!), and
+PARAMETER is not a NAMEREF, it introduces a level of indirection.  Bash
+uses the value formed by expanding the rest of PARAMETER as the new
+PARAMETER; this is then expanded and that value is used in the rest of
+the expansion, rather than the expansion of the original PARAMETER.
+This is known as 'indirect expansion'.  The value is subject to tilde
+expansion, parameter expansion, command substitution, and arithmetic
+expansion.  If PARAMETER is a nameref, this expands to the name of the
+variable referenced by PARAMETER instead of performing the complete
+indirect expansion.  The exceptions to this are the expansions of
+${!PREFIX*} and ${!NAME[@]} described below.  The exclamation point must
+immediately follow the left brace in order to introduce indirection.
+
+   In each of the cases below, WORD is subject to tilde expansion,
+parameter expansion, command substitution, and arithmetic expansion.
+
+   When not performing substring expansion, using the form described
+below (e.g., ':-'), Bash tests for a parameter that is unset or null.
+Omitting the colon results in a test only for a parameter that is unset.
+Put another way, if the colon is included, the operator tests for both
+PARAMETER's existence and that its value is not null; if the colon is
+omitted, the operator tests only for existence.
+
+'${PARAMETER:-WORD}'
+     If PARAMETER is unset or null, the expansion of WORD is
+     substituted.  Otherwise, the value of PARAMETER is substituted.
+
+'${PARAMETER:=WORD}'
+     If PARAMETER is unset or null, the expansion of WORD is assigned to
+     PARAMETER.  The value of PARAMETER is then substituted.  Positional
+     parameters and special parameters may not be assigned to in this
+     way.
+
+'${PARAMETER:?WORD}'
+     If PARAMETER is null or unset, the expansion of WORD (or a message
+     to that effect if WORD is not present) is written to the standard
+     error and the shell, if it is not interactive, exits.  Otherwise,
+     the value of PARAMETER is substituted.
+
+'${PARAMETER:+WORD}'
+     If PARAMETER is null or unset, nothing is substituted, otherwise
+     the expansion of WORD is substituted.
+
+'${PARAMETER:OFFSET}'
+'${PARAMETER:OFFSET:LENGTH}'
+     This is referred to as Substring Expansion.  It expands to up to
+     LENGTH characters of the value of PARAMETER starting at the
+     character specified by OFFSET.  If PARAMETER is '@', an indexed
+     array subscripted by '@' or '*', or an associative array name, the
+     results differ as described below.  If LENGTH is omitted, it
+     expands to the substring of the value of PARAMETER starting at the
+     character specified by OFFSET and extending to the end of the
+     value.  LENGTH and OFFSET are arithmetic expressions (*note Shell
+     Arithmetic::).
+
+     If OFFSET evaluates to a number less than zero, the value is used
+     as an offset in characters from the end of the value of PARAMETER.
+     If LENGTH evaluates to a number less than zero, it is interpreted
+     as an offset in characters from the end of the value of PARAMETER
+     rather than a number of characters, and the expansion is the
+     characters between OFFSET and that result.  Note that a negative
+     offset must be separated from the colon by at least one space to
+     avoid being confused with the ':-' expansion.
+
+     Here are some examples illustrating substring expansion on
+     parameters and subscripted arrays:
+
+     $ string=01234567890abcdefgh
+     $ echo ${string:7}
+     7890abcdefgh
+     $ echo ${string:7:0}
+     
+     $ echo ${string:7:2}
+     78
+     $ echo ${string:7:-2}
+     7890abcdef
+     $ echo ${string: -7}
+     bcdefgh
+     $ echo ${string: -7:0}
+     
+     $ echo ${string: -7:2}
+     bc
+     $ echo ${string: -7:-2}
+     bcdef
+     $ set -- 01234567890abcdefgh
+     $ echo ${1:7}
+     7890abcdefgh
+     $ echo ${1:7:0}
+     
+     $ echo ${1:7:2}
+     78
+     $ echo ${1:7:-2}
+     7890abcdef
+     $ echo ${1: -7}
+     bcdefgh
+     $ echo ${1: -7:0}
+     
+     $ echo ${1: -7:2}
+     bc
+     $ echo ${1: -7:-2}
+     bcdef
+     $ array[0]=01234567890abcdefgh
+     $ echo ${array[0]:7}
+     7890abcdefgh
+     $ echo ${array[0]:7:0}
+     
+     $ echo ${array[0]:7:2}
+     78
+     $ echo ${array[0]:7:-2}
+     7890abcdef
+     $ echo ${array[0]: -7}
+     bcdefgh
+     $ echo ${array[0]: -7:0}
+     
+     $ echo ${array[0]: -7:2}
+     bc
+     $ echo ${array[0]: -7:-2}
+     bcdef
+
+     If PARAMETER is '@', the result is LENGTH positional parameters
+     beginning at OFFSET.  A negative OFFSET is taken relative to one
+     greater than the greatest positional parameter, so an offset of -1
+     evaluates to the last positional parameter.  It is an expansion
+     error if LENGTH evaluates to a number less than zero.
+
+     The following examples illustrate substring expansion using
+     positional parameters:
+
+     $ set -- 1 2 3 4 5 6 7 8 9 0 a b c d e f g h
+     $ echo ${@:7}
+     7 8 9 0 a b c d e f g h
+     $ echo ${@:7:0}
+     
+     $ echo ${@:7:2}
+     7 8
+     $ echo ${@:7:-2}
+     bash: -2: substring expression < 0
+     $ echo ${@: -7:2}
+     b c
+     $ echo ${@:0}
+     ./bash 1 2 3 4 5 6 7 8 9 0 a b c d e f g h
+     $ echo ${@:0:2}
+     ./bash 1
+     $ echo ${@: -7:0}
+     
+
+     If PARAMETER is an indexed array name subscripted by '@' or '*',
+     the result is the LENGTH members of the array beginning with
+     '${PARAMETER[OFFSET]}'.  A negative OFFSET is taken relative to one
+     greater than the maximum index of the specified array.  It is an
+     expansion error if LENGTH evaluates to a number less than zero.
+
+     These examples show how you can use substring expansion with
+     indexed arrays:
+
+     $ array=(0 1 2 3 4 5 6 7 8 9 0 a b c d e f g h)
+     $ echo ${array[@]:7}
+     7 8 9 0 a b c d e f g h
+     $ echo ${array[@]:7:2}
+     7 8
+     $ echo ${array[@]: -7:2}
+     b c
+     $ echo ${array[@]: -7:-2}
+     bash: -2: substring expression < 0
+     $ echo ${array[@]:0}
+     0 1 2 3 4 5 6 7 8 9 0 a b c d e f g h
+     $ echo ${array[@]:0:2}
+     0 1
+     $ echo ${array[@]: -7:0}
+     
+
+     Substring expansion applied to an associative array produces
+     undefined results.
+
+     Substring indexing is zero-based unless the positional parameters
+     are used, in which case the indexing starts at 1 by default.  If
+     OFFSET is 0, and the positional parameters are used, '$0' is
+     prefixed to the list.
+
+'${!PREFIX*}'
+'${!PREFIX@}'
+     Expands to the names of variables whose names begin with PREFIX,
+     separated by the first character of the 'IFS' special variable.
+     When '@' is used and the expansion appears within double quotes,
+     each variable name expands to a separate word.
+
+'${!NAME[@]}'
+'${!NAME[*]}'
+     If NAME is an array variable, expands to the list of array indices
+     (keys) assigned in NAME.  If NAME is not an array, expands to 0 if
+     NAME is set and null otherwise.  When '@' is used and the expansion
+     appears within double quotes, each key expands to a separate word.
+
+'${#PARAMETER}'
+     The length in characters of the expanded value of PARAMETER is
+     substituted.  If PARAMETER is '*' or '@', the value substituted is
+     the number of positional parameters.  If PARAMETER is an array name
+     subscripted by '*' or '@', the value substituted is the number of
+     elements in the array.  If PARAMETER is an indexed array name
+     subscripted by a negative number, that number is interpreted as
+     relative to one greater than the maximum index of PARAMETER, so
+     negative indices count back from the end of the array, and an index
+     of -1 references the last element.
+
+'${PARAMETER#WORD}'
+'${PARAMETER##WORD}'
+     The WORD is expanded to produce a pattern and matched according to
+     the rules described below (*note Pattern Matching::).  If the
+     pattern matches the beginning of the expanded value of PARAMETER,
+     then the result of the expansion is the expanded value of PARAMETER
+     with the shortest matching pattern (the '#' case) or the longest
+     matching pattern (the '##' case) deleted.  If PARAMETER is '@' or
+     '*', the pattern removal operation is applied to each positional
+     parameter in turn, and the expansion is the resultant list.  If
+     PARAMETER is an array variable subscripted with '@' or '*', the
+     pattern removal operation is applied to each member of the array in
+     turn, and the expansion is the resultant list.
+
+'${PARAMETER%WORD}'
+'${PARAMETER%%WORD}'
+     The WORD is expanded to produce a pattern and matched according to
+     the rules described below (*note Pattern Matching::).  If the
+     pattern matches a trailing portion of the expanded value of
+     PARAMETER, then the result of the expansion is the value of
+     PARAMETER with the shortest matching pattern (the '%' case) or the
+     longest matching pattern (the '%%' case) deleted.  If PARAMETER is
+     '@' or '*', the pattern removal operation is applied to each
+     positional parameter in turn, and the expansion is the resultant
+     list.  If PARAMETER is an array variable subscripted with '@' or
+     '*', the pattern removal operation is applied to each member of the
+     array in turn, and the expansion is the resultant list.
+
+'${PARAMETER/PATTERN/STRING}'
+
+     The PATTERN is expanded to produce a pattern just as in filename
+     expansion.  PARAMETER is expanded and the longest match of PATTERN
+     against its value is replaced with STRING.  The match is performed
+     according to the rules described below (*note Pattern Matching::).
+     If PATTERN begins with '/', all matches of PATTERN are replaced
+     with STRING.  Normally only the first match is replaced.  If
+     PATTERN begins with '#', it must match at the beginning of the
+     expanded value of PARAMETER.  If PATTERN begins with '%', it must
+     match at the end of the expanded value of PARAMETER.  If STRING is
+     null, matches of PATTERN are deleted and the '/' following PATTERN
+     may be omitted.  If the 'nocasematch' shell option (see the
+     description of 'shopt' in *note The Shopt Builtin::) is enabled,
+     the match is performed without regard to the case of alphabetic
+     characters.  If PARAMETER is '@' or '*', the substitution operation
+     is applied to each positional parameter in turn, and the expansion
+     is the resultant list.  If PARAMETER is an array variable
+     subscripted with '@' or '*', the substitution operation is applied
+     to each member of the array in turn, and the expansion is the
+     resultant list.
+
+'${PARAMETER^PATTERN}'
+'${PARAMETER^^PATTERN}'
+'${PARAMETER,PATTERN}'
+'${PARAMETER,,PATTERN}'
+     This expansion modifies the case of alphabetic characters in
+     PARAMETER.  The PATTERN is expanded to produce a pattern just as in
+     filename expansion.  Each character in the expanded value of
+     PARAMETER is tested against PATTERN, and, if it matches the
+     pattern, its case is converted.  The pattern should not attempt to
+     match more than one character.  The '^' operator converts lowercase
+     letters matching PATTERN to uppercase; the ',' operator converts
+     matching uppercase letters to lowercase.  The '^^' and ',,'
+     expansions convert each matched character in the expanded value;
+     the '^' and ',' expansions match and convert only the first
+     character in the expanded value.  If PATTERN is omitted, it is
+     treated like a '?', which matches every character.  If PARAMETER is
+     '@' or '*', the case modification operation is applied to each
+     positional parameter in turn, and the expansion is the resultant
+     list.  If PARAMETER is an array variable subscripted with '@' or
+     '*', the case modification operation is applied to each member of
+     the array in turn, and the expansion is the resultant list.
+
+'${PARAMETER@OPERATOR}'
+     The expansion is either a transformation of the value of PARAMETER
+     or information about PARAMETER itself, depending on the value of
+     OPERATOR.  Each OPERATOR is a single letter:
+
+     'U'
+          The expansion is a string that is the value of PARAMETER with
+          lowercase alphabetic characters converted to uppercase.
+     'u'
+          The expansion is a string that is the value of PARAMETER with
+          the first character converted to uppercase, if it is
+          alphabetic.
+     'L'
+          The expansion is a string that is the value of PARAMETER with
+          uppercase alphabetic characters converted to lowercase.
+     'Q'
+          The expansion is a string that is the value of PARAMETER
+          quoted in a format that can be reused as input.
+     'E'
+          The expansion is a string that is the value of PARAMETER with
+          backslash escape sequences expanded as with the '$'...''
+          quoting mechanism.
+     'P'
+          The expansion is a string that is the result of expanding the
+          value of PARAMETER as if it were a prompt string (*note
+          Controlling the Prompt::).
+     'A'
+          The expansion is a string in the form of an assignment
+          statement or 'declare' command that, if evaluated, will
+          recreate PARAMETER with its attributes and value.
+     'K'
+          Produces a possibly-quoted version of the value of PARAMETER,
+          except that it prints the values of indexed and associative
+          arrays as a sequence of quoted key-value pairs (*note
+          Arrays::).
+     'a'
+          The expansion is a string consisting of flag values
+          representing PARAMETER's attributes.
+
+     If PARAMETER is '@' or '*', the operation is applied to each
+     positional parameter in turn, and the expansion is the resultant
+     list.  If PARAMETER is an array variable subscripted with '@' or
+     '*', the operation is applied to each member of the array in turn,
+     and the expansion is the resultant list.
+
+     The result of the expansion is subject to word splitting and
+     filename expansion as described below.
+
+
+File: bashref.info,  Node: Command Substitution,  Next: Arithmetic Expansion,  Prev: Shell Parameter Expansion,  Up: Shell Expansions
+
+3.5.4 Command Substitution
+--------------------------
+
+Command substitution allows the output of a command to replace the
+command itself.  Command substitution occurs when a command is enclosed
+as follows:
+     $(COMMAND)
+or
+     `COMMAND`
+
+Bash performs the expansion by executing COMMAND in a subshell
+environment and replacing the command substitution with the standard
+output of the command, with any trailing newlines deleted.  Embedded
+newlines are not deleted, but they may be removed during word splitting.
+The command substitution '$(cat FILE)' can be replaced by the equivalent
+but faster '$(< FILE)'.
+
+   When the old-style backquote form of substitution is used, backslash
+retains its literal meaning except when followed by '$', '`', or '\'.
+The first backquote not preceded by a backslash terminates the command
+substitution.  When using the '$(COMMAND)' form, all characters between
+the parentheses make up the command; none are treated specially.
+
+   Command substitutions may be nested.  To nest when using the
+backquoted form, escape the inner backquotes with backslashes.
+
+   If the substitution appears within double quotes, word splitting and
+filename expansion are not performed on the results.
+
+
+File: bashref.info,  Node: Arithmetic Expansion,  Next: Process Substitution,  Prev: Command Substitution,  Up: Shell Expansions
+
+3.5.5 Arithmetic Expansion
+--------------------------
+
+Arithmetic expansion allows the evaluation of an arithmetic expression
+and the substitution of the result.  The format for arithmetic expansion
+is:
+
+     $(( EXPRESSION ))
+
+   The expression is treated as if it were within double quotes, but a
+double quote inside the parentheses is not treated specially.  All
+tokens in the expression undergo parameter and variable expansion,
+command substitution, and quote removal.  The result is treated as the
+arithmetic expression to be evaluated.  Arithmetic expansions may be
+nested.
+
+   The evaluation is performed according to the rules listed below
+(*note Shell Arithmetic::).  If the expression is invalid, Bash prints a
+message indicating failure to the standard error and no substitution
+occurs.
+
+
+File: bashref.info,  Node: Process Substitution,  Next: Word Splitting,  Prev: Arithmetic Expansion,  Up: Shell Expansions
+
+3.5.6 Process Substitution
+--------------------------
+
+Process substitution allows a process's input or output to be referred
+to using a filename.  It takes the form of
+     <(LIST)
+or
+     >(LIST)
+The process LIST is run asynchronously, and its input or output appears
+as a filename.  This filename is passed as an argument to the current
+command as the result of the expansion.  If the '>(LIST)' form is used,
+writing to the file will provide input for LIST.  If the '<(LIST)' form
+is used, the file passed as an argument should be read to obtain the
+output of LIST.  Note that no space may appear between the '<' or '>'
+and the left parenthesis, otherwise the construct would be interpreted
+as a redirection.  Process substitution is supported on systems that
+support named pipes (FIFOs) or the '/dev/fd' method of naming open
+files.
+
+   When available, process substitution is performed simultaneously with
+parameter and variable expansion, command substitution, and arithmetic
+expansion.
+
+
+File: bashref.info,  Node: Word Splitting,  Next: Filename Expansion,  Prev: Process Substitution,  Up: Shell Expansions
+
+3.5.7 Word Splitting
+--------------------
+
+The shell scans the results of parameter expansion, command
+substitution, and arithmetic expansion that did not occur within double
+quotes for word splitting.
+
+   The shell treats each character of '$IFS' as a delimiter, and splits
+the results of the other expansions into words using these characters as
+field terminators.  If 'IFS' is unset, or its value is exactly
+'<space><tab><newline>', the default, then sequences of ' <space>',
+'<tab>', and '<newline>' at the beginning and end of the results of the
+previous expansions are ignored, and any sequence of 'IFS' characters
+not at the beginning or end serves to delimit words.  If 'IFS' has a
+value other than the default, then sequences of the whitespace
+characters 'space', 'tab', and 'newline' are ignored at the beginning
+and end of the word, as long as the whitespace character is in the value
+of 'IFS' (an 'IFS' whitespace character).  Any character in 'IFS' that
+is not 'IFS' whitespace, along with any adjacent 'IFS' whitespace
+characters, delimits a field.  A sequence of 'IFS' whitespace characters
+is also treated as a delimiter.  If the value of 'IFS' is null, no word
+splitting occurs.
+
+   Explicit null arguments ('""' or '''') are retained and passed to
+commands as empty strings.  Unquoted implicit null arguments, resulting
+from the expansion of parameters that have no values, are removed.  If a
+parameter with no value is expanded within double quotes, a null
+argument results and is retained and passed to a command as an empty
+string.  When a quoted null argument appears as part of a word whose
+expansion is non-null, the null argument is removed.  That is, the word
+'-d''' becomes '-d' after word splitting and null argument removal.
+
+   Note that if no expansion occurs, no splitting is performed.
+
+
+File: bashref.info,  Node: Filename Expansion,  Next: Quote Removal,  Prev: Word Splitting,  Up: Shell Expansions
+
+3.5.8 Filename Expansion
+------------------------
+
+* Menu:
+
+* Pattern Matching::	How the shell matches patterns.
+
+After word splitting, unless the '-f' option has been set (*note The Set
+Builtin::), Bash scans each word for the characters '*', '?', and '['.
+If one of these characters appears, and is not quoted, then the word is
+regarded as a PATTERN, and replaced with an alphabetically sorted list
+of filenames matching the pattern (*note Pattern Matching::).  If no
+matching filenames are found, and the shell option 'nullglob' is
+disabled, the word is left unchanged.  If the 'nullglob' option is set,
+and no matches are found, the word is removed.  If the 'failglob' shell
+option is set, and no matches are found, an error message is printed and
+the command is not executed.  If the shell option 'nocaseglob' is
+enabled, the match is performed without regard to the case of alphabetic
+characters.
+
+   When a pattern is used for filename expansion, the character '.' at
+the start of a filename or immediately following a slash must be matched
+explicitly, unless the shell option 'dotglob' is set.  The filenames '.'
+and '..' must always be matched explicitly, even if 'dotglob' is set.
+In other cases, the '.' character is not treated specially.
+
+   When matching a filename, the slash character must always be matched
+explicitly by a slash in the pattern, but in other matching contexts it
+can be matched by a special pattern character as described below (*note
+Pattern Matching::).
+
+   See the description of 'shopt' in *note The Shopt Builtin::, for a
+description of the 'nocaseglob', 'nullglob', 'failglob', and 'dotglob'
+options.
+
+   The 'GLOBIGNORE' shell variable may be used to restrict the set of
+file names matching a pattern.  If 'GLOBIGNORE' is set, each matching
+file name that also matches one of the patterns in 'GLOBIGNORE' is
+removed from the list of matches.  If the 'nocaseglob' option is set,
+the matching against the patterns in 'GLOBIGNORE' is performed without
+regard to case.  The filenames '.' and '..' are always ignored when
+'GLOBIGNORE' is set and not null.  However, setting 'GLOBIGNORE' to a
+non-null value has the effect of enabling the 'dotglob' shell option, so
+all other filenames beginning with a '.' will match.  To get the old
+behavior of ignoring filenames beginning with a '.', make '.*' one of
+the patterns in 'GLOBIGNORE'.  The 'dotglob' option is disabled when
+'GLOBIGNORE' is unset.
+
+
+File: bashref.info,  Node: Pattern Matching,  Up: Filename Expansion
+
+3.5.8.1 Pattern Matching
+........................
+
+Any character that appears in a pattern, other than the special pattern
+characters described below, matches itself.  The NUL character may not
+occur in a pattern.  A backslash escapes the following character; the
+escaping backslash is discarded when matching.  The special pattern
+characters must be quoted if they are to be matched literally.
+
+   The special pattern characters have the following meanings:
+'*'
+     Matches any string, including the null string.  When the 'globstar'
+     shell option is enabled, and '*' is used in a filename expansion
+     context, two adjacent '*'s used as a single pattern will match all
+     files and zero or more directories and subdirectories.  If followed
+     by a '/', two adjacent '*'s will match only directories and
+     subdirectories.
+'?'
+     Matches any single character.
+'[...]'
+     Matches any one of the enclosed characters.  A pair of characters
+     separated by a hyphen denotes a RANGE EXPRESSION; any character
+     that falls between those two characters, inclusive, using the
+     current locale's collating sequence and character set, is matched.
+     If the first character following the '[' is a '!' or a '^' then any
+     character not enclosed is matched.  A '-' may be matched by
+     including it as the first or last character in the set.  A ']' may
+     be matched by including it as the first character in the set.  The
+     sorting order of characters in range expressions is determined by
+     the current locale and the values of the 'LC_COLLATE' and 'LC_ALL'
+     shell variables, if set.
+
+     For example, in the default C locale, '[a-dx-z]' is equivalent to
+     '[abcdxyz]'.  Many locales sort characters in dictionary order, and
+     in these locales '[a-dx-z]' is typically not equivalent to
+     '[abcdxyz]'; it might be equivalent to '[aBbCcDdxXyYz]', for
+     example.  To obtain the traditional interpretation of ranges in
+     bracket expressions, you can force the use of the C locale by
+     setting the 'LC_COLLATE' or 'LC_ALL' environment variable to the
+     value 'C', or enable the 'globasciiranges' shell option.
+
+     Within '[' and ']', CHARACTER CLASSES can be specified using the
+     syntax '[:'CLASS':]', where CLASS is one of the following classes
+     defined in the POSIX standard:
+          alnum   alpha   ascii   blank   cntrl   digit   graph   lower
+          print   punct   space   upper   word    xdigit
+     A character class matches any character belonging to that class.
+     The 'word' character class matches letters, digits, and the
+     character '_'.
+
+     Within '[' and ']', an EQUIVALENCE CLASS can be specified using the
+     syntax '[='C'=]', which matches all characters with the same
+     collation weight (as defined by the current locale) as the
+     character C.
+
+     Within '[' and ']', the syntax '[.'SYMBOL'.]' matches the collating
+     symbol SYMBOL.
+
+   If the 'extglob' shell option is enabled using the 'shopt' builtin,
+several extended pattern matching operators are recognized.  In the
+following description, a PATTERN-LIST is a list of one or more patterns
+separated by a '|'.  Composite patterns may be formed using one or more
+of the following sub-patterns:
+
+'?(PATTERN-LIST)'
+     Matches zero or one occurrence of the given patterns.
+
+'*(PATTERN-LIST)'
+     Matches zero or more occurrences of the given patterns.
+
+'+(PATTERN-LIST)'
+     Matches one or more occurrences of the given patterns.
+
+'@(PATTERN-LIST)'
+     Matches one of the given patterns.
+
+'!(PATTERN-LIST)'
+     Matches anything except one of the given patterns.
+
+   Complicated extended pattern matching against long strings is slow,
+especially when the patterns contain alternations and the strings
+contain multiple matches.  Using separate matches against shorter
+strings, or using arrays of strings instead of a single long string, may
+be faster.
+
+
+File: bashref.info,  Node: Quote Removal,  Prev: Filename Expansion,  Up: Shell Expansions
+
+3.5.9 Quote Removal
+-------------------
+
+After the preceding expansions, all unquoted occurrences of the
+characters '\', ''', and '"' that did not result from one of the above
+expansions are removed.
+
+
+File: bashref.info,  Node: Redirections,  Next: Executing Commands,  Prev: Shell Expansions,  Up: Basic Shell Features
+
+3.6 Redirections
+================
+
+Before a command is executed, its input and output may be REDIRECTED
+using a special notation interpreted by the shell.  Redirection allows
+commands' file handles to be duplicated, opened, closed, made to refer
+to different files, and can change the files the command reads from and
+writes to.  Redirection may also be used to modify file handles in the
+current shell execution environment.  The following redirection
+operators may precede or appear anywhere within a simple command or may
+follow a command.  Redirections are processed in the order they appear,
+from left to right.
+
+   Each redirection that may be preceded by a file descriptor number may
+instead be preceded by a word of the form {VARNAME}.  In this case, for
+each redirection operator except >&- and <&-, the shell will allocate a
+file descriptor greater than 10 and assign it to {VARNAME}.  If >&- or
+<&- is preceded by {VARNAME}, the value of VARNAME defines the file
+descriptor to close.  If {VARNAME} is supplied, the redirection persists
+beyond the scope of the command, allowing the shell programmer to manage
+the file descriptor's lifetime manually.
+
+   In the following descriptions, if the file descriptor number is
+omitted, and the first character of the redirection operator is '<', the
+redirection refers to the standard input (file descriptor 0).  If the
+first character of the redirection operator is '>', the redirection
+refers to the standard output (file descriptor 1).
+
+   The word following the redirection operator in the following
+descriptions, unless otherwise noted, is subjected to brace expansion,
+tilde expansion, parameter expansion, command substitution, arithmetic
+expansion, quote removal, filename expansion, and word splitting.  If it
+expands to more than one word, Bash reports an error.
+
+   Note that the order of redirections is significant.  For example, the
+command
+     ls > DIRLIST 2>&1
+directs both standard output (file descriptor 1) and standard error
+(file descriptor 2) to the file DIRLIST, while the command
+     ls 2>&1 > DIRLIST
+directs only the standard output to file DIRLIST, because the standard
+error was made a copy of the standard output before the standard output
+was redirected to DIRLIST.
+
+   Bash handles several filenames specially when they are used in
+redirections, as described in the following table.  If the operating
+system on which Bash is running provides these special files, bash will
+use them; otherwise it will emulate them internally with the behavior
+described below.
+
+'/dev/fd/FD'
+     If FD is a valid integer, file descriptor FD is duplicated.
+
+'/dev/stdin'
+     File descriptor 0 is duplicated.
+
+'/dev/stdout'
+     File descriptor 1 is duplicated.
+
+'/dev/stderr'
+     File descriptor 2 is duplicated.
+
+'/dev/tcp/HOST/PORT'
+     If HOST is a valid hostname or Internet address, and PORT is an
+     integer port number or service name, Bash attempts to open the
+     corresponding TCP socket.
+
+'/dev/udp/HOST/PORT'
+     If HOST is a valid hostname or Internet address, and PORT is an
+     integer port number or service name, Bash attempts to open the
+     corresponding UDP socket.
+
+   A failure to open or create a file causes the redirection to fail.
+
+   Redirections using file descriptors greater than 9 should be used
+with care, as they may conflict with file descriptors the shell uses
+internally.
+
+3.6.1 Redirecting Input
+-----------------------
+
+Redirection of input causes the file whose name results from the
+expansion of WORD to be opened for reading on file descriptor 'n', or
+the standard input (file descriptor 0) if 'n' is not specified.
+
+   The general format for redirecting input is:
+     [N]<WORD
+
+3.6.2 Redirecting Output
+------------------------
+
+Redirection of output causes the file whose name results from the
+expansion of WORD to be opened for writing on file descriptor N, or the
+standard output (file descriptor 1) if N is not specified.  If the file
+does not exist it is created; if it does exist it is truncated to zero
+size.
+
+   The general format for redirecting output is:
+     [N]>[|]WORD
+
+   If the redirection operator is '>', and the 'noclobber' option to the
+'set' builtin has been enabled, the redirection will fail if the file
+whose name results from the expansion of WORD exists and is a regular
+file.  If the redirection operator is '>|', or the redirection operator
+is '>' and the 'noclobber' option is not enabled, the redirection is
+attempted even if the file named by WORD exists.
+
+3.6.3 Appending Redirected Output
+---------------------------------
+
+Redirection of output in this fashion causes the file whose name results
+from the expansion of WORD to be opened for appending on file descriptor
+N, or the standard output (file descriptor 1) if N is not specified.  If
+the file does not exist it is created.
+
+   The general format for appending output is:
+     [N]>>WORD
+
+3.6.4 Redirecting Standard Output and Standard Error
+----------------------------------------------------
+
+This construct allows both the standard output (file descriptor 1) and
+the standard error output (file descriptor 2) to be redirected to the
+file whose name is the expansion of WORD.
+
+   There are two formats for redirecting standard output and standard
+error:
+     &>WORD
+and
+     >&WORD
+Of the two forms, the first is preferred.  This is semantically
+equivalent to
+     >WORD 2>&1
+   When using the second form, WORD may not expand to a number or '-'.
+If it does, other redirection operators apply (see Duplicating File
+Descriptors below) for compatibility reasons.
+
+3.6.5 Appending Standard Output and Standard Error
+--------------------------------------------------
+
+This construct allows both the standard output (file descriptor 1) and
+the standard error output (file descriptor 2) to be appended to the file
+whose name is the expansion of WORD.
+
+   The format for appending standard output and standard error is:
+     &>>WORD
+This is semantically equivalent to
+     >>WORD 2>&1
+   (see Duplicating File Descriptors below).
+
+3.6.6 Here Documents
+--------------------
+
+This type of redirection instructs the shell to read input from the
+current source until a line containing only WORD (with no trailing
+blanks) is seen.  All of the lines read up to that point are then used
+as the standard input (or file descriptor N if N is specified) for a
+command.
+
+   The format of here-documents is:
+     [N]<<[-]WORD
+             HERE-DOCUMENT
+     DELIMITER
+
+   No parameter and variable expansion, command substitution, arithmetic
+expansion, or filename expansion is performed on WORD.  If any part of
+WORD is quoted, the DELIMITER is the result of quote removal on WORD,
+and the lines in the here-document are not expanded.  If WORD is
+unquoted, all lines of the here-document are subjected to parameter
+expansion, command substitution, and arithmetic expansion, the character
+sequence '\newline' is ignored, and '\' must be used to quote the
+characters '\', '$', and '`'.
+
+   If the redirection operator is '<<-', then all leading tab characters
+are stripped from input lines and the line containing DELIMITER.  This
+allows here-documents within shell scripts to be indented in a natural
+fashion.
+
+3.6.7 Here Strings
+------------------
+
+A variant of here documents, the format is:
+     [N]<<< WORD
+
+   The WORD undergoes tilde expansion, parameter and variable expansion,
+command substitution, arithmetic expansion, and quote removal.  Filename
+expansion and word splitting are not performed.  The result is supplied
+as a single string, with a newline appended, to the command on its
+standard input (or file descriptor N if N is specified).
+
+3.6.8 Duplicating File Descriptors
+----------------------------------
+
+The redirection operator
+     [N]<&WORD
+is used to duplicate input file descriptors.  If WORD expands to one or
+more digits, the file descriptor denoted by N is made to be a copy of
+that file descriptor.  If the digits in WORD do not specify a file
+descriptor open for input, a redirection error occurs.  If WORD
+evaluates to '-', file descriptor N is closed.  If N is not specified,
+the standard input (file descriptor 0) is used.
+
+   The operator
+     [N]>&WORD
+is used similarly to duplicate output file descriptors.  If N is not
+specified, the standard output (file descriptor 1) is used.  If the
+digits in WORD do not specify a file descriptor open for output, a
+redirection error occurs.  If WORD evaluates to '-', file descriptor N
+is closed.  As a special case, if N is omitted, and WORD does not expand
+to one or more digits or '-', the standard output and standard error are
+redirected as described previously.
+
+3.6.9 Moving File Descriptors
+-----------------------------
+
+The redirection operator
+     [N]<&DIGIT-
+moves the file descriptor DIGIT to file descriptor N, or the standard
+input (file descriptor 0) if N is not specified.  DIGIT is closed after
+being duplicated to N.
+
+   Similarly, the redirection operator
+     [N]>&DIGIT-
+moves the file descriptor DIGIT to file descriptor N, or the standard
+output (file descriptor 1) if N is not specified.
+
+3.6.10 Opening File Descriptors for Reading and Writing
+-------------------------------------------------------
+
+The redirection operator
+     [N]<>WORD
+causes the file whose name is the expansion of WORD to be opened for
+both reading and writing on file descriptor N, or on file descriptor 0
+if N is not specified.  If the file does not exist, it is created.
+
+
+File: bashref.info,  Node: Executing Commands,  Next: Shell Scripts,  Prev: Redirections,  Up: Basic Shell Features
+
+3.7 Executing Commands
+======================
+
+* Menu:
+
+* Simple Command Expansion::	How Bash expands simple commands before
+				executing them.
+* Command Search and Execution::	How Bash finds commands and runs them.
+* Command Execution Environment::	The environment in which Bash
+					executes commands that are not
+					shell builtins.
+* Environment::		The environment given to a command.
+* Exit Status::		The status returned by commands and how Bash
+			interprets it.
+* Signals::		What happens when Bash or a command it runs
+			receives a signal.
+
+
+File: bashref.info,  Node: Simple Command Expansion,  Next: Command Search and Execution,  Up: Executing Commands
+
+3.7.1 Simple Command Expansion
+------------------------------
+
+When a simple command is executed, the shell performs the following
+expansions, assignments, and redirections, from left to right, in the
+following order.
+
+  1. The words that the parser has marked as variable assignments (those
+     preceding the command name) and redirections are saved for later
+     processing.
+
+  2. The words that are not variable assignments or redirections are
+     expanded (*note Shell Expansions::).  If any words remain after
+     expansion, the first word is taken to be the name of the command
+     and the remaining words are the arguments.
+
+  3. Redirections are performed as described above (*note
+     Redirections::).
+
+  4. The text after the '=' in each variable assignment undergoes tilde
+     expansion, parameter expansion, command substitution, arithmetic
+     expansion, and quote removal before being assigned to the variable.
+
+   If no command name results, the variable assignments affect the
+current shell environment.  Otherwise, the variables are added to the
+environment of the executed command and do not affect the current shell
+environment.  If any of the assignments attempts to assign a value to a
+readonly variable, an error occurs, and the command exits with a
+non-zero status.
+
+   If no command name results, redirections are performed, but do not
+affect the current shell environment.  A redirection error causes the
+command to exit with a non-zero status.
+
+   If there is a command name left after expansion, execution proceeds
+as described below.  Otherwise, the command exits.  If one of the
+expansions contained a command substitution, the exit status of the
+command is the exit status of the last command substitution performed.
+If there were no command substitutions, the command exits with a status
+of zero.
+
+
+File: bashref.info,  Node: Command Search and Execution,  Next: Command Execution Environment,  Prev: Simple Command Expansion,  Up: Executing Commands
+
+3.7.2 Command Search and Execution
+----------------------------------
+
+After a command has been split into words, if it results in a simple
+command and an optional list of arguments, the following actions are
+taken.
+
+  1. If the command name contains no slashes, the shell attempts to
+     locate it.  If there exists a shell function by that name, that
+     function is invoked as described in *note Shell Functions::.
+
+  2. If the name does not match a function, the shell searches for it in
+     the list of shell builtins.  If a match is found, that builtin is
+     invoked.
+
+  3. If the name is neither a shell function nor a builtin, and contains
+     no slashes, Bash searches each element of '$PATH' for a directory
+     containing an executable file by that name.  Bash uses a hash table
+     to remember the full pathnames of executable files to avoid
+     multiple 'PATH' searches (see the description of 'hash' in *note
+     Bourne Shell Builtins::).  A full search of the directories in
+     '$PATH' is performed only if the command is not found in the hash
+     table.  If the search is unsuccessful, the shell searches for a
+     defined shell function named 'command_not_found_handle'.  If that
+     function exists, it is invoked in a separate execution environment
+     with the original command and the original command's arguments as
+     its arguments, and the function's exit status becomes the exit
+     status of that subshell.  If that function is not defined, the
+     shell prints an error message and returns an exit status of 127.
+
+  4. If the search is successful, or if the command name contains one or
+     more slashes, the shell executes the named program in a separate
+     execution environment.  Argument 0 is set to the name given, and
+     the remaining arguments to the command are set to the arguments
+     supplied, if any.
+
+  5. If this execution fails because the file is not in executable
+     format, and the file is not a directory, it is assumed to be a
+     SHELL SCRIPT and the shell executes it as described in *note Shell
+     Scripts::.
+
+  6. If the command was not begun asynchronously, the shell waits for
+     the command to complete and collects its exit status.
+
+
+File: bashref.info,  Node: Command Execution Environment,  Next: Environment,  Prev: Command Search and Execution,  Up: Executing Commands
+
+3.7.3 Command Execution Environment
+-----------------------------------
+
+The shell has an EXECUTION ENVIRONMENT, which consists of the following:
+
+   * open files inherited by the shell at invocation, as modified by
+     redirections supplied to the 'exec' builtin
+
+   * the current working directory as set by 'cd', 'pushd', or 'popd',
+     or inherited by the shell at invocation
+
+   * the file creation mode mask as set by 'umask' or inherited from the
+     shell's parent
+
+   * current traps set by 'trap'
+
+   * shell parameters that are set by variable assignment or with 'set'
+     or inherited from the shell's parent in the environment
+
+   * shell functions defined during execution or inherited from the
+     shell's parent in the environment
+
+   * options enabled at invocation (either by default or with
+     command-line arguments) or by 'set'
+
+   * options enabled by 'shopt' (*note The Shopt Builtin::)
+
+   * shell aliases defined with 'alias' (*note Aliases::)
+
+   * various process IDs, including those of background jobs (*note
+     Lists::), the value of '$$', and the value of '$PPID'
+
+   When a simple command other than a builtin or shell function is to be
+executed, it is invoked in a separate execution environment that
+consists of the following.  Unless otherwise noted, the values are
+inherited from the shell.
+
+   * the shell's open files, plus any modifications and additions
+     specified by redirections to the command
+
+   * the current working directory
+
+   * the file creation mode mask
+
+   * shell variables and functions marked for export, along with
+     variables exported for the command, passed in the environment
+     (*note Environment::)
+
+   * traps caught by the shell are reset to the values inherited from
+     the shell's parent, and traps ignored by the shell are ignored
+
+   A command invoked in this separate environment cannot affect the
+shell's execution environment.
+
+   Command substitution, commands grouped with parentheses, and
+asynchronous commands are invoked in a subshell environment that is a
+duplicate of the shell environment, except that traps caught by the
+shell are reset to the values that the shell inherited from its parent
+at invocation.  Builtin commands that are invoked as part of a pipeline
+are also executed in a subshell environment.  Changes made to the
+subshell environment cannot affect the shell's execution environment.
+
+   Subshells spawned to execute command substitutions inherit the value
+of the '-e' option from the parent shell.  When not in POSIX mode, Bash
+clears the '-e' option in such subshells.
+
+   If a command is followed by a '&' and job control is not active, the
+default standard input for the command is the empty file '/dev/null'.
+Otherwise, the invoked command inherits the file descriptors of the
+calling shell as modified by redirections.
+
+
+File: bashref.info,  Node: Environment,  Next: Exit Status,  Prev: Command Execution Environment,  Up: Executing Commands
+
+3.7.4 Environment
+-----------------
+
+When a program is invoked it is given an array of strings called the
+ENVIRONMENT.  This is a list of name-value pairs, of the form
+'name=value'.
+
+   Bash provides several ways to manipulate the environment.  On
+invocation, the shell scans its own environment and creates a parameter
+for each name found, automatically marking it for EXPORT to child
+processes.  Executed commands inherit the environment.  The 'export' and
+'declare -x' commands allow parameters and functions to be added to and
+deleted from the environment.  If the value of a parameter in the
+environment is modified, the new value becomes part of the environment,
+replacing the old.  The environment inherited by any executed command
+consists of the shell's initial environment, whose values may be
+modified in the shell, less any pairs removed by the 'unset' and 'export
+-n' commands, plus any additions via the 'export' and 'declare -x'
+commands.
+
+   The environment for any simple command or function may be augmented
+temporarily by prefixing it with parameter assignments, as described in
+*note Shell Parameters::.  These assignment statements affect only the
+environment seen by that command.
+
+   If the '-k' option is set (*note The Set Builtin::), then all
+parameter assignments are placed in the environment for a command, not
+just those that precede the command name.
+
+   When Bash invokes an external command, the variable '$_' is set to
+the full pathname of the command and passed to that command in its
+environment.
+
+
+File: bashref.info,  Node: Exit Status,  Next: Signals,  Prev: Environment,  Up: Executing Commands
+
+3.7.5 Exit Status
+-----------------
+
+The exit status of an executed command is the value returned by the
+WAITPID system call or equivalent function.  Exit statuses fall between
+0 and 255, though, as explained below, the shell may use values above
+125 specially.  Exit statuses from shell builtins and compound commands
+are also limited to this range.  Under certain circumstances, the shell
+will use special values to indicate specific failure modes.
+
+   For the shell's purposes, a command which exits with a zero exit
+status has succeeded.  A non-zero exit status indicates failure.  This
+seemingly counter-intuitive scheme is used so there is one well-defined
+way to indicate success and a variety of ways to indicate various
+failure modes.  When a command terminates on a fatal signal whose number
+is N, Bash uses the value 128+N as the exit status.
+
+   If a command is not found, the child process created to execute it
+returns a status of 127.  If a command is found but is not executable,
+the return status is 126.
+
+   If a command fails because of an error during expansion or
+redirection, the exit status is greater than zero.
+
+   The exit status is used by the Bash conditional commands (*note
+Conditional Constructs::) and some of the list constructs (*note
+Lists::).
+
+   All of the Bash builtins return an exit status of zero if they
+succeed and a non-zero status on failure, so they may be used by the
+conditional and list constructs.  All builtins return an exit status of
+2 to indicate incorrect usage, generally invalid options or missing
+arguments.
+
+
+File: bashref.info,  Node: Signals,  Prev: Exit Status,  Up: Executing Commands
+
+3.7.6 Signals
+-------------
+
+When Bash is interactive, in the absence of any traps, it ignores
+'SIGTERM' (so that 'kill 0' does not kill an interactive shell), and
+'SIGINT' is caught and handled (so that the 'wait' builtin is
+interruptible).  When Bash receives a 'SIGINT', it breaks out of any
+executing loops.  In all cases, Bash ignores 'SIGQUIT'.  If job control
+is in effect (*note Job Control::), Bash ignores 'SIGTTIN', 'SIGTTOU',
+and 'SIGTSTP'.
+
+   Non-builtin commands started by Bash have signal handlers set to the
+values inherited by the shell from its parent.  When job control is not
+in effect, asynchronous commands ignore 'SIGINT' and 'SIGQUIT' in
+addition to these inherited handlers.  Commands run as a result of
+command substitution ignore the keyboard-generated job control signals
+'SIGTTIN', 'SIGTTOU', and 'SIGTSTP'.
+
+   The shell exits by default upon receipt of a 'SIGHUP'.  Before
+exiting, an interactive shell resends the 'SIGHUP' to all jobs, running
+or stopped.  Stopped jobs are sent 'SIGCONT' to ensure that they receive
+the 'SIGHUP'.  To prevent the shell from sending the 'SIGHUP' signal to
+a particular job, it should be removed from the jobs table with the
+'disown' builtin (*note Job Control Builtins::) or marked to not receive
+'SIGHUP' using 'disown -h'.
+
+   If the 'huponexit' shell option has been set with 'shopt' (*note The
+Shopt Builtin::), Bash sends a 'SIGHUP' to all jobs when an interactive
+login shell exits.
+
+   If Bash is waiting for a command to complete and receives a signal
+for which a trap has been set, the trap will not be executed until the
+command completes.  When Bash is waiting for an asynchronous command via
+the 'wait' builtin, the reception of a signal for which a trap has been
+set will cause the 'wait' builtin to return immediately with an exit
+status greater than 128, immediately after which the trap is executed.
+
+
+File: bashref.info,  Node: Shell Scripts,  Prev: Executing Commands,  Up: Basic Shell Features
+
+3.8 Shell Scripts
+=================
+
+A shell script is a text file containing shell commands.  When such a
+file is used as the first non-option argument when invoking Bash, and
+neither the '-c' nor '-s' option is supplied (*note Invoking Bash::),
+Bash reads and executes commands from the file, then exits.  This mode
+of operation creates a non-interactive shell.  The shell first searches
+for the file in the current directory, and looks in the directories in
+'$PATH' if not found there.
+
+   When Bash runs a shell script, it sets the special parameter '0' to
+the name of the file, rather than the name of the shell, and the
+positional parameters are set to the remaining arguments, if any are
+given.  If no additional arguments are supplied, the positional
+parameters are unset.
+
+   A shell script may be made executable by using the 'chmod' command to
+turn on the execute bit.  When Bash finds such a file while searching
+the '$PATH' for a command, it spawns a subshell to execute it.  In other
+words, executing
+     filename ARGUMENTS
+is equivalent to executing
+     bash filename ARGUMENTS
+
+if 'filename' is an executable shell script.  This subshell
+reinitializes itself, so that the effect is as if a new shell had been
+invoked to interpret the script, with the exception that the locations
+of commands remembered by the parent (see the description of 'hash' in
+*note Bourne Shell Builtins::) are retained by the child.
+
+   Most versions of Unix make this a part of the operating system's
+command execution mechanism.  If the first line of a script begins with
+the two characters '#!', the remainder of the line specifies an
+interpreter for the program and, depending on the operating system, one
+or more optional arguments for that interpreter.  Thus, you can specify
+Bash, 'awk', Perl, or some other interpreter and write the rest of the
+script file in that language.
+
+   The arguments to the interpreter consist of one or more optional
+arguments following the interpreter name on the first line of the script
+file, followed by the name of the script file, followed by the rest of
+the arguments supplied to the script.  The details of how the
+interpreter line is split into an interpreter name and a set of
+arguments vary across systems.  Bash will perform this action on
+operating systems that do not handle it themselves.  Note that some
+older versions of Unix limit the interpreter name and a single argument
+to a maximum of 32 characters, so it's not portable to assume that using
+more than one argument will work.
+
+   Bash scripts often begin with '#! /bin/bash' (assuming that Bash has
+been installed in '/bin'), since this ensures that Bash will be used to
+interpret the script, even if it is executed under another shell.  It's
+a common idiom to use 'env' to find 'bash' even if it's been installed
+in another directory: '#!/usr/bin/env bash' will find the first
+occurrence of 'bash' in '$PATH'.
+
+
+File: bashref.info,  Node: Shell Builtin Commands,  Next: Shell Variables,  Prev: Basic Shell Features,  Up: Top
+
+4 Shell Builtin Commands
+************************
+
+* Menu:
+
+* Bourne Shell Builtins::	Builtin commands inherited from the Bourne
+				Shell.
+* Bash Builtins::		Table of builtins specific to Bash.
+* Modifying Shell Behavior::	Builtins to modify shell attributes and
+				optional behavior.
+* Special Builtins::		Builtin commands classified specially by
+				POSIX.
+
+Builtin commands are contained within the shell itself.  When the name
+of a builtin command is used as the first word of a simple command
+(*note Simple Commands::), the shell executes the command directly,
+without invoking another program.  Builtin commands are necessary to
+implement functionality impossible or inconvenient to obtain with
+separate utilities.
+
+   This section briefly describes the builtins which Bash inherits from
+the Bourne Shell, as well as the builtin commands which are unique to or
+have been extended in Bash.
+
+   Several builtin commands are described in other chapters: builtin
+commands which provide the Bash interface to the job control facilities
+(*note Job Control Builtins::), the directory stack (*note Directory
+Stack Builtins::), the command history (*note Bash History Builtins::),
+and the programmable completion facilities (*note Programmable
+Completion Builtins::).
+
+   Many of the builtins have been extended by POSIX or Bash.
+
+   Unless otherwise noted, each builtin command documented as accepting
+options preceded by '-' accepts '--' to signify the end of the options.
+The ':', 'true', 'false', and 'test'/'[' builtins do not accept options
+and do not treat '--' specially.  The 'exit', 'logout', 'return',
+'break', 'continue', 'let', and 'shift' builtins accept and process
+arguments beginning with '-' without requiring '--'.  Other builtins
+that accept arguments but are not specified as accepting options
+interpret arguments beginning with '-' as invalid options and require
+'--' to prevent this interpretation.
+
+
+File: bashref.info,  Node: Bourne Shell Builtins,  Next: Bash Builtins,  Up: Shell Builtin Commands
+
+4.1 Bourne Shell Builtins
+=========================
+
+The following shell builtin commands are inherited from the Bourne
+Shell.  These commands are implemented as specified by the POSIX
+standard.
+
+': (a colon)'
+          : [ARGUMENTS]
+
+     Do nothing beyond expanding ARGUMENTS and performing redirections.
+     The return status is zero.
+
+'. (a period)'
+          . FILENAME [ARGUMENTS]
+
+     Read and execute commands from the FILENAME argument in the current
+     shell context.  If FILENAME does not contain a slash, the 'PATH'
+     variable is used to find FILENAME.  When Bash is not in POSIX mode,
+     the current directory is searched if FILENAME is not found in
+     '$PATH'.  If any ARGUMENTS are supplied, they become the positional
+     parameters when FILENAME is executed.  Otherwise the positional
+     parameters are unchanged.  If the '-T' option is enabled, 'source'
+     inherits any trap on 'DEBUG'; if it is not, any 'DEBUG' trap string
+     is saved and restored around the call to 'source', and 'source'
+     unsets the 'DEBUG' trap while it executes.  If '-T' is not set, and
+     the sourced file changes the 'DEBUG' trap, the new value is
+     retained when 'source' completes.  The return status is the exit
+     status of the last command executed, or zero if no commands are
+     executed.  If FILENAME is not found, or cannot be read, the return
+     status is non-zero.  This builtin is equivalent to 'source'.
+
+'break'
+          break [N]
+
+     Exit from a 'for', 'while', 'until', or 'select' loop.  If N is
+     supplied, the Nth enclosing loop is exited.  N must be greater than
+     or equal to 1.  The return status is zero unless N is not greater
+     than or equal to 1.
+
+'cd'
+          cd [-L|[-P [-e]] [-@] [DIRECTORY]
+
+     Change the current working directory to DIRECTORY.  If DIRECTORY is
+     not supplied, the value of the 'HOME' shell variable is used.  Any
+     additional arguments following DIRECTORY are ignored.  If the shell
+     variable 'CDPATH' exists, it is used as a search path: each
+     directory name in 'CDPATH' is searched for DIRECTORY, with
+     alternative directory names in 'CDPATH' separated by a colon (':').
+     If DIRECTORY begins with a slash, 'CDPATH' is not used.
+
+     The '-P' option means to not follow symbolic links: symbolic links
+     are resolved while 'cd' is traversing DIRECTORY and before
+     processing an instance of '..' in DIRECTORY.
+
+     By default, or when the '-L' option is supplied, symbolic links in
+     DIRECTORY are resolved after 'cd' processes an instance of '..' in
+     DIRECTORY.
+
+     If '..' appears in DIRECTORY, it is processed by removing the
+     immediately preceding pathname component, back to a slash or the
+     beginning of DIRECTORY.
+
+     If the '-e' option is supplied with '-P' and the current working
+     directory cannot be successfully determined after a successful
+     directory change, 'cd' will return an unsuccessful status.
+
+     On systems that support it, the '-@' option presents the extended
+     attributes associated with a file as a directory.
+
+     If DIRECTORY is '-', it is converted to '$OLDPWD' before the
+     directory change is attempted.
+
+     If a non-empty directory name from 'CDPATH' is used, or if '-' is
+     the first argument, and the directory change is successful, the
+     absolute pathname of the new working directory is written to the
+     standard output.
+
+     The return status is zero if the directory is successfully changed,
+     non-zero otherwise.
+
+'continue'
+          continue [N]
+
+     Resume the next iteration of an enclosing 'for', 'while', 'until',
+     or 'select' loop.  If N is supplied, the execution of the Nth
+     enclosing loop is resumed.  N must be greater than or equal to 1.
+     The return status is zero unless N is not greater than or equal to
+     1.
+
+'eval'
+          eval [ARGUMENTS]
+
+     The arguments are concatenated together into a single command,
+     which is then read and executed, and its exit status returned as
+     the exit status of 'eval'.  If there are no arguments or only empty
+     arguments, the return status is zero.
+
+'exec'
+          exec [-cl] [-a NAME] [COMMAND [ARGUMENTS]]
+
+     If COMMAND is supplied, it replaces the shell without creating a
+     new process.  If the '-l' option is supplied, the shell places a
+     dash at the beginning of the zeroth argument passed to COMMAND.
+     This is what the 'login' program does.  The '-c' option causes
+     COMMAND to be executed with an empty environment.  If '-a' is
+     supplied, the shell passes NAME as the zeroth argument to COMMAND.
+     If COMMAND cannot be executed for some reason, a non-interactive
+     shell exits, unless the 'execfail' shell option is enabled.  In
+     that case, it returns failure.  An interactive shell returns
+     failure if the file cannot be executed.  A subshell exits
+     unconditionally if 'exec' fails.  If no COMMAND is specified,
+     redirections may be used to affect the current shell environment.
+     If there are no redirection errors, the return status is zero;
+     otherwise the return status is non-zero.
+
+'exit'
+          exit [N]
+
+     Exit the shell, returning a status of N to the shell's parent.  If
+     N is omitted, the exit status is that of the last command executed.
+     Any trap on 'EXIT' is executed before the shell terminates.
+
+'export'
+          export [-fn] [-p] [NAME[=VALUE]]
+
+     Mark each NAME to be passed to child processes in the environment.
+     If the '-f' option is supplied, the NAMEs refer to shell functions;
+     otherwise the names refer to shell variables.  The '-n' option
+     means to no longer mark each NAME for export.  If no NAMES are
+     supplied, or if the '-p' option is given, a list of names of all
+     exported variables is displayed.  The '-p' option displays output
+     in a form that may be reused as input.  If a variable name is
+     followed by =VALUE, the value of the variable is set to VALUE.
+
+     The return status is zero unless an invalid option is supplied, one
+     of the names is not a valid shell variable name, or '-f' is
+     supplied with a name that is not a shell function.
+
+'getopts'
+          getopts OPTSTRING NAME [ARG ...]
+
+     'getopts' is used by shell scripts to parse positional parameters.
+     OPTSTRING contains the option characters to be recognized; if a
+     character is followed by a colon, the option is expected to have an
+     argument, which should be separated from it by whitespace.  The
+     colon (':') and question mark ('?') may not be used as option
+     characters.  Each time it is invoked, 'getopts' places the next
+     option in the shell variable NAME, initializing NAME if it does not
+     exist, and the index of the next argument to be processed into the
+     variable 'OPTIND'.  'OPTIND' is initialized to 1 each time the
+     shell or a shell script is invoked.  When an option requires an
+     argument, 'getopts' places that argument into the variable
+     'OPTARG'.  The shell does not reset 'OPTIND' automatically; it must
+     be manually reset between multiple calls to 'getopts' within the
+     same shell invocation if a new set of parameters is to be used.
+
+     When the end of options is encountered, 'getopts' exits with a
+     return value greater than zero.  'OPTIND' is set to the index of
+     the first non-option argument, and NAME is set to '?'.
+
+     'getopts' normally parses the positional parameters, but if more
+     arguments are supplied as ARG values, 'getopts' parses those
+     instead.
+
+     'getopts' can report errors in two ways.  If the first character of
+     OPTSTRING is a colon, SILENT error reporting is used.  In normal
+     operation, diagnostic messages are printed when invalid options or
+     missing option arguments are encountered.  If the variable 'OPTERR'
+     is set to 0, no error messages will be displayed, even if the first
+     character of 'optstring' is not a colon.
+
+     If an invalid option is seen, 'getopts' places '?' into NAME and,
+     if not silent, prints an error message and unsets 'OPTARG'.  If
+     'getopts' is silent, the option character found is placed in
+     'OPTARG' and no diagnostic message is printed.
+
+     If a required argument is not found, and 'getopts' is not silent, a
+     question mark ('?') is placed in NAME, 'OPTARG' is unset, and a
+     diagnostic message is printed.  If 'getopts' is silent, then a
+     colon (':') is placed in NAME and 'OPTARG' is set to the option
+     character found.
+
+'hash'
+          hash [-r] [-p FILENAME] [-dt] [NAME]
+
+     Each time 'hash' is invoked, it remembers the full pathnames of the
+     commands specified as NAME arguments, so they need not be searched
+     for on subsequent invocations.  The commands are found by searching
+     through the directories listed in '$PATH'.  Any
+     previously-remembered pathname is discarded.  The '-p' option
+     inhibits the path search, and FILENAME is used as the location of
+     NAME.  The '-r' option causes the shell to forget all remembered
+     locations.  The '-d' option causes the shell to forget the
+     remembered location of each NAME.  If the '-t' option is supplied,
+     the full pathname to which each NAME corresponds is printed.  If
+     multiple NAME arguments are supplied with '-t', the NAME is printed
+     before the hashed full pathname.  The '-l' option causes output to
+     be displayed in a format that may be reused as input.  If no
+     arguments are given, or if only '-l' is supplied, information about
+     remembered commands is printed.  The return status is zero unless a
+     NAME is not found or an invalid option is supplied.
+
+'pwd'
+          pwd [-LP]
+
+     Print the absolute pathname of the current working directory.  If
+     the '-P' option is supplied, the pathname printed will not contain
+     symbolic links.  If the '-L' option is supplied, the pathname
+     printed may contain symbolic links.  The return status is zero
+     unless an error is encountered while determining the name of the
+     current directory or an invalid option is supplied.
+
+'readonly'
+          readonly [-aAf] [-p] [NAME[=VALUE]] ...
+
+     Mark each NAME as readonly.  The values of these names may not be
+     changed by subsequent assignment.  If the '-f' option is supplied,
+     each NAME refers to a shell function.  The '-a' option means each
+     NAME refers to an indexed array variable; the '-A' option means
+     each NAME refers to an associative array variable.  If both options
+     are supplied, '-A' takes precedence.  If no NAME arguments are
+     given, or if the '-p' option is supplied, a list of all readonly
+     names is printed.  The other options may be used to restrict the
+     output to a subset of the set of readonly names.  The '-p' option
+     causes output to be displayed in a format that may be reused as
+     input.  If a variable name is followed by =VALUE, the value of the
+     variable is set to VALUE.  The return status is zero unless an
+     invalid option is supplied, one of the NAME arguments is not a
+     valid shell variable or function name, or the '-f' option is
+     supplied with a name that is not a shell function.
+
+'return'
+          return [N]
+
+     Cause a shell function to stop executing and return the value N to
+     its caller.  If N is not supplied, the return value is the exit
+     status of the last command executed in the function.  If 'return'
+     is executed by a trap handler, the last command used to determine
+     the status is the last command executed before the trap handler.
+     If 'return' is executed during a 'DEBUG' trap, the last command
+     used to determine the status is the last command executed by the
+     trap handler before 'return' was invoked.  'return' may also be
+     used to terminate execution of a script being executed with the '.'
+     ('source') builtin, returning either N or the exit status of the
+     last command executed within the script as the exit status of the
+     script.  If N is supplied, the return value is its least
+     significant 8 bits.  Any command associated with the 'RETURN' trap
+     is executed before execution resumes after the function or script.
+     The return status is non-zero if 'return' is supplied a non-numeric
+     argument or is used outside a function and not during the execution
+     of a script by '.' or 'source'.
+
+'shift'
+          shift [N]
+
+     Shift the positional parameters to the left by N.  The positional
+     parameters from N+1 ... '$#' are renamed to '$1' ... '$#'-N.
+     Parameters represented by the numbers '$#' down to '$#'-N+1 are
+     unset.  N must be a non-negative number less than or equal to '$#'.
+     If N is zero or greater than '$#', the positional parameters are
+     not changed.  If N is not supplied, it is assumed to be 1.  The
+     return status is zero unless N is greater than '$#' or less than
+     zero, non-zero otherwise.
+
+'test'
+'['
+          test EXPR
+
+     Evaluate a conditional expression EXPR and return a status of 0
+     (true) or 1 (false).  Each operator and operand must be a separate
+     argument.  Expressions are composed of the primaries described
+     below in *note Bash Conditional Expressions::.  'test' does not
+     accept any options, nor does it accept and ignore an argument of
+     '--' as signifying the end of options.
+
+     When the '[' form is used, the last argument to the command must be
+     a ']'.
+
+     Expressions may be combined using the following operators, listed
+     in decreasing order of precedence.  The evaluation depends on the
+     number of arguments; see below.  Operator precedence is used when
+     there are five or more arguments.
+
+     '! EXPR'
+          True if EXPR is false.
+
+     '( EXPR )'
+          Returns the value of EXPR.  This may be used to override the
+          normal precedence of operators.
+
+     'EXPR1 -a EXPR2'
+          True if both EXPR1 and EXPR2 are true.
+
+     'EXPR1 -o EXPR2'
+          True if either EXPR1 or EXPR2 is true.
+
+     The 'test' and '[' builtins evaluate conditional expressions using
+     a set of rules based on the number of arguments.
+
+     0 arguments
+          The expression is false.
+
+     1 argument
+          The expression is true if, and only if, the argument is not
+          null.
+
+     2 arguments
+          If the first argument is '!', the expression is true if and
+          only if the second argument is null.  If the first argument is
+          one of the unary conditional operators (*note Bash Conditional
+          Expressions::), the expression is true if the unary test is
+          true.  If the first argument is not a valid unary operator,
+          the expression is false.
+
+     3 arguments
+          The following conditions are applied in the order listed.
+
+            1. If the second argument is one of the binary conditional
+               operators (*note Bash Conditional Expressions::), the
+               result of the expression is the result of the binary test
+               using the first and third arguments as operands.  The
+               '-a' and '-o' operators are considered binary operators
+               when there are three arguments.
+            2. If the first argument is '!', the value is the negation
+               of the two-argument test using the second and third
+               arguments.
+            3. If the first argument is exactly '(' and the third
+               argument is exactly ')', the result is the one-argument
+               test of the second argument.
+            4. Otherwise, the expression is false.
+
+     4 arguments
+          If the first argument is '!', the result is the negation of
+          the three-argument expression composed of the remaining
+          arguments.  Otherwise, the expression is parsed and evaluated
+          according to precedence using the rules listed above.
+
+     5 or more arguments
+          The expression is parsed and evaluated according to precedence
+          using the rules listed above.
+
+     When used with 'test' or '[', the '<' and '>' operators sort
+     lexicographically using ASCII ordering.
+
+'times'
+          times
+
+     Print out the user and system times used by the shell and its
+     children.  The return status is zero.
+
+'trap'
+          trap [-lp] [ARG] [SIGSPEC ...]
+
+     The commands in ARG are to be read and executed when the shell
+     receives signal SIGSPEC.  If ARG is absent (and there is a single
+     SIGSPEC) or equal to '-', each specified signal's disposition is
+     reset to the value it had when the shell was started.  If ARG is
+     the null string, then the signal specified by each SIGSPEC is
+     ignored by the shell and commands it invokes.  If ARG is not
+     present and '-p' has been supplied, the shell displays the trap
+     commands associated with each SIGSPEC.  If no arguments are
+     supplied, or only '-p' is given, 'trap' prints the list of commands
+     associated with each signal number in a form that may be reused as
+     shell input.  The '-l' option causes the shell to print a list of
+     signal names and their corresponding numbers.  Each SIGSPEC is
+     either a signal name or a signal number.  Signal names are case
+     insensitive and the 'SIG' prefix is optional.
+
+     If a SIGSPEC is '0' or 'EXIT', ARG is executed when the shell
+     exits.  If a SIGSPEC is 'DEBUG', the command ARG is executed before
+     every simple command, 'for' command, 'case' command, 'select'
+     command, every arithmetic 'for' command, and before the first
+     command executes in a shell function.  Refer to the description of
+     the 'extdebug' option to the 'shopt' builtin (*note The Shopt
+     Builtin::) for details of its effect on the 'DEBUG' trap.  If a
+     SIGSPEC is 'RETURN', the command ARG is executed each time a shell
+     function or a script executed with the '.' or 'source' builtins
+     finishes executing.
+
+     If a SIGSPEC is 'ERR', the command ARG is executed whenever a
+     pipeline (which may consist of a single simple command), a list, or
+     a compound command returns a non-zero exit status, subject to the
+     following conditions.  The 'ERR' trap is not executed if the failed
+     command is part of the command list immediately following an
+     'until' or 'while' keyword, part of the test following the 'if' or
+     'elif' reserved words, part of a command executed in a '&&' or '||'
+     list except the command following the final '&&' or '||', any
+     command in a pipeline but the last, or if the command's return
+     status is being inverted using '!'.  These are the same conditions
+     obeyed by the 'errexit' ('-e') option.
+
+     Signals ignored upon entry to the shell cannot be trapped or reset.
+     Trapped signals that are not being ignored are reset to their
+     original values in a subshell or subshell environment when one is
+     created.
+
+     The return status is zero unless a SIGSPEC does not specify a valid
+     signal.
+
+'umask'
+          umask [-p] [-S] [MODE]
+
+     Set the shell process's file creation mask to MODE.  If MODE begins
+     with a digit, it is interpreted as an octal number; if not, it is
+     interpreted as a symbolic mode mask similar to that accepted by the
+     'chmod' command.  If MODE is omitted, the current value of the mask
+     is printed.  If the '-S' option is supplied without a MODE
+     argument, the mask is printed in a symbolic format.  If the '-p'
+     option is supplied, and MODE is omitted, the output is in a form
+     that may be reused as input.  The return status is zero if the mode
+     is successfully changed or if no MODE argument is supplied, and
+     non-zero otherwise.
+
+     Note that when the mode is interpreted as an octal number, each
+     number of the umask is subtracted from '7'.  Thus, a umask of '022'
+     results in permissions of '755'.
+
+'unset'
+          unset [-fnv] [NAME]
+
+     Remove each variable or function NAME.  If the '-v' option is
+     given, each NAME refers to a shell variable and that variable is
+     removed.  If the '-f' option is given, the NAMEs refer to shell
+     functions, and the function definition is removed.  If the '-n'
+     option is supplied, and NAME is a variable with the NAMEREF
+     attribute, NAME will be unset rather than the variable it
+     references.  '-n' has no effect if the '-f' option is supplied.  If
+     no options are supplied, each NAME refers to a variable; if there
+     is no variable by that name, a function with that name, if any, is
+     unset.  Readonly variables and functions may not be unset.  Some
+     shell variables lose their special behavior if they are unset; such
+     behavior is noted in the description of the individual variables.
+     The return status is zero unless a NAME is readonly.
+
+
+File: bashref.info,  Node: Bash Builtins,  Next: Modifying Shell Behavior,  Prev: Bourne Shell Builtins,  Up: Shell Builtin Commands
+
+4.2 Bash Builtin Commands
+=========================
+
+This section describes builtin commands which are unique to or have been
+extended in Bash.  Some of these commands are specified in the POSIX
+standard.
+
+'alias'
+          alias [-p] [NAME[=VALUE] ...]
+
+     Without arguments or with the '-p' option, 'alias' prints the list
+     of aliases on the standard output in a form that allows them to be
+     reused as input.  If arguments are supplied, an alias is defined
+     for each NAME whose VALUE is given.  If no VALUE is given, the name
+     and value of the alias is printed.  Aliases are described in *note
+     Aliases::.
+
+'bind'
+          bind [-m KEYMAP] [-lpsvPSVX]
+          bind [-m KEYMAP] [-q FUNCTION] [-u FUNCTION] [-r KEYSEQ]
+          bind [-m KEYMAP] -f FILENAME
+          bind [-m KEYMAP] -x KEYSEQ:SHELL-COMMAND
+          bind [-m KEYMAP] KEYSEQ:FUNCTION-NAME
+          bind [-m KEYMAP] KEYSEQ:READLINE-COMMAND
+
+     Display current Readline (*note Command Line Editing::) key and
+     function bindings, bind a key sequence to a Readline function or
+     macro, or set a Readline variable.  Each non-option argument is a
+     command as it would appear in a Readline initialization file (*note
+     Readline Init File::), but each binding or command must be passed
+     as a separate argument; e.g., '"\C-x\C-r":re-read-init-file'.
+
+     Options, if supplied, have the following meanings:
+
+     '-m KEYMAP'
+          Use KEYMAP as the keymap to be affected by the subsequent
+          bindings.  Acceptable KEYMAP names are 'emacs',
+          'emacs-standard', 'emacs-meta', 'emacs-ctlx', 'vi', 'vi-move',
+          'vi-command', and 'vi-insert'.  'vi' is equivalent to
+          'vi-command' ('vi-move' is also a synonym); 'emacs' is
+          equivalent to 'emacs-standard'.
+
+     '-l'
+          List the names of all Readline functions.
+
+     '-p'
+          Display Readline function names and bindings in such a way
+          that they can be used as input or in a Readline initialization
+          file.
+
+     '-P'
+          List current Readline function names and bindings.
+
+     '-v'
+          Display Readline variable names and values in such a way that
+          they can be used as input or in a Readline initialization
+          file.
+
+     '-V'
+          List current Readline variable names and values.
+
+     '-s'
+          Display Readline key sequences bound to macros and the strings
+          they output in such a way that they can be used as input or in
+          a Readline initialization file.
+
+     '-S'
+          Display Readline key sequences bound to macros and the strings
+          they output.
+
+     '-f FILENAME'
+          Read key bindings from FILENAME.
+
+     '-q FUNCTION'
+          Query about which keys invoke the named FUNCTION.
+
+     '-u FUNCTION'
+          Unbind all keys bound to the named FUNCTION.
+
+     '-r KEYSEQ'
+          Remove any current binding for KEYSEQ.
+
+     '-x KEYSEQ:SHELL-COMMAND'
+          Cause SHELL-COMMAND to be executed whenever KEYSEQ is entered.
+          When SHELL-COMMAND is executed, the shell sets the
+          'READLINE_LINE' variable to the contents of the Readline line
+          buffer and the 'READLINE_POINT' and 'READLINE_MARK' variables
+          to the current location of the insertion point and the saved
+          insertion point (the MARK), respectively.  If the executed
+          command changes the value of any of 'READLINE_LINE',
+          'READLINE_POINT', or 'READLINE_MARK', those new values will be
+          reflected in the editing state.
+
+     '-X'
+          List all key sequences bound to shell commands and the
+          associated commands in a format that can be reused as input.
+
+     The return status is zero unless an invalid option is supplied or
+     an error occurs.
+
+'builtin'
+          builtin [SHELL-BUILTIN [ARGS]]
+
+     Run a shell builtin, passing it ARGS, and return its exit status.
+     This is useful when defining a shell function with the same name as
+     a shell builtin, retaining the functionality of the builtin within
+     the function.  The return status is non-zero if SHELL-BUILTIN is
+     not a shell builtin command.
+
+'caller'
+          caller [EXPR]
+
+     Returns the context of any active subroutine call (a shell function
+     or a script executed with the '.' or 'source' builtins).
+
+     Without EXPR, 'caller' displays the line number and source filename
+     of the current subroutine call.  If a non-negative integer is
+     supplied as EXPR, 'caller' displays the line number, subroutine
+     name, and source file corresponding to that position in the current
+     execution call stack.  This extra information may be used, for
+     example, to print a stack trace.  The current frame is frame 0.
+
+     The return value is 0 unless the shell is not executing a
+     subroutine call or EXPR does not correspond to a valid position in
+     the call stack.
+
+'command'
+          command [-pVv] COMMAND [ARGUMENTS ...]
+
+     Runs COMMAND with ARGUMENTS ignoring any shell function named
+     COMMAND.  Only shell builtin commands or commands found by
+     searching the 'PATH' are executed.  If there is a shell function
+     named 'ls', running 'command ls' within the function will execute
+     the external command 'ls' instead of calling the function
+     recursively.  The '-p' option means to use a default value for
+     'PATH' that is guaranteed to find all of the standard utilities.
+     The return status in this case is 127 if COMMAND cannot be found or
+     an error occurred, and the exit status of COMMAND otherwise.
+
+     If either the '-V' or '-v' option is supplied, a description of
+     COMMAND is printed.  The '-v' option causes a single word
+     indicating the command or file name used to invoke COMMAND to be
+     displayed; the '-V' option produces a more verbose description.  In
+     this case, the return status is zero if COMMAND is found, and
+     non-zero if not.
+
+'declare'
+          declare [-aAfFgiIlnrtux] [-p] [NAME[=VALUE] ...]
+
+     Declare variables and give them attributes.  If no NAMEs are given,
+     then display the values of variables instead.
+
+     The '-p' option will display the attributes and values of each
+     NAME.  When '-p' is used with NAME arguments, additional options,
+     other than '-f' and '-F', are ignored.
+
+     When '-p' is supplied without NAME arguments, 'declare' will
+     display the attributes and values of all variables having the
+     attributes specified by the additional options.  If no other
+     options are supplied with '-p', 'declare' will display the
+     attributes and values of all shell variables.  The '-f' option will
+     restrict the display to shell functions.
+
+     The '-F' option inhibits the display of function definitions; only
+     the function name and attributes are printed.  If the 'extdebug'
+     shell option is enabled using 'shopt' (*note The Shopt Builtin::),
+     the source file name and line number where each NAME is defined are
+     displayed as well.  '-F' implies '-f'.
+
+     The '-g' option forces variables to be created or modified at the
+     global scope, even when 'declare' is executed in a shell function.
+     It is ignored in all other cases.
+
+     The '-I' option causes local variables to inherit the attributes
+     (except the NAMEREF attribute) and value of any existing variable
+     with the same NAME at a surrounding scope.  If there is no existing
+     variable, the local variable is initially unset.
+
+     The following options can be used to restrict output to variables
+     with the specified attributes or to give variables attributes:
+
+     '-a'
+          Each NAME is an indexed array variable (*note Arrays::).
+
+     '-A'
+          Each NAME is an associative array variable (*note Arrays::).
+
+     '-f'
+          Use function names only.
+
+     '-i'
+          The variable is to be treated as an integer; arithmetic
+          evaluation (*note Shell Arithmetic::) is performed when the
+          variable is assigned a value.
+
+     '-l'
+          When the variable is assigned a value, all upper-case
+          characters are converted to lower-case.  The upper-case
+          attribute is disabled.
+
+     '-n'
+          Give each NAME the NAMEREF attribute, making it a name
+          reference to another variable.  That other variable is defined
+          by the value of NAME.  All references, assignments, and
+          attribute modifications to NAME, except for those using or
+          changing the '-n' attribute itself, are performed on the
+          variable referenced by NAME's value.  The nameref attribute
+          cannot be applied to array variables.
+
+     '-r'
+          Make NAMEs readonly.  These names cannot then be assigned
+          values by subsequent assignment statements or unset.
+
+     '-t'
+          Give each NAME the 'trace' attribute.  Traced functions
+          inherit the 'DEBUG' and 'RETURN' traps from the calling shell.
+          The trace attribute has no special meaning for variables.
+
+     '-u'
+          When the variable is assigned a value, all lower-case
+          characters are converted to upper-case.  The lower-case
+          attribute is disabled.
+
+     '-x'
+          Mark each NAME for export to subsequent commands via the
+          environment.
+
+     Using '+' instead of '-' turns off the attribute instead, with the
+     exceptions that '+a' and '+A' may not be used to destroy array
+     variables and '+r' will not remove the readonly attribute.  When
+     used in a function, 'declare' makes each NAME local, as with the
+     'local' command, unless the '-g' option is used.  If a variable
+     name is followed by =VALUE, the value of the variable is set to
+     VALUE.
+
+     When using '-a' or '-A' and the compound assignment syntax to
+     create array variables, additional attributes do not take effect
+     until subsequent assignments.
+
+     The return status is zero unless an invalid option is encountered,
+     an attempt is made to define a function using '-f foo=bar', an
+     attempt is made to assign a value to a readonly variable, an
+     attempt is made to assign a value to an array variable without
+     using the compound assignment syntax (*note Arrays::), one of the
+     NAMES is not a valid shell variable name, an attempt is made to
+     turn off readonly status for a readonly variable, an attempt is
+     made to turn off array status for an array variable, or an attempt
+     is made to display a non-existent function with '-f'.
+
+'echo'
+          echo [-neE] [ARG ...]
+
+     Output the ARGs, separated by spaces, terminated with a newline.
+     The return status is 0 unless a write error occurs.  If '-n' is
+     specified, the trailing newline is suppressed.  If the '-e' option
+     is given, interpretation of the following backslash-escaped
+     characters is enabled.  The '-E' option disables the interpretation
+     of these escape characters, even on systems where they are
+     interpreted by default.  The 'xpg_echo' shell option may be used to
+     dynamically determine whether or not 'echo' expands these escape
+     characters by default.  'echo' does not interpret '--' to mean the
+     end of options.
+
+     'echo' interprets the following escape sequences:
+     '\a'
+          alert (bell)
+     '\b'
+          backspace
+     '\c'
+          suppress further output
+     '\e'
+     '\E'
+          escape
+     '\f'
+          form feed
+     '\n'
+          new line
+     '\r'
+          carriage return
+     '\t'
+          horizontal tab
+     '\v'
+          vertical tab
+     '\\'
+          backslash
+     '\0NNN'
+          the eight-bit character whose value is the octal value NNN
+          (zero to three octal digits)
+     '\xHH'
+          the eight-bit character whose value is the hexadecimal value
+          HH (one or two hex digits)
+     '\uHHHH'
+          the Unicode (ISO/IEC 10646) character whose value is the
+          hexadecimal value HHHH (one to four hex digits)
+     '\UHHHHHHHH'
+          the Unicode (ISO/IEC 10646) character whose value is the
+          hexadecimal value HHHHHHHH (one to eight hex digits)
+
+'enable'
+          enable [-a] [-dnps] [-f FILENAME] [NAME ...]
+
+     Enable and disable builtin shell commands.  Disabling a builtin
+     allows a disk command which has the same name as a shell builtin to
+     be executed without specifying a full pathname, even though the
+     shell normally searches for builtins before disk commands.  If '-n'
+     is used, the NAMEs become disabled.  Otherwise NAMEs are enabled.
+     For example, to use the 'test' binary found via '$PATH' instead of
+     the shell builtin version, type 'enable -n test'.
+
+     If the '-p' option is supplied, or no NAME arguments appear, a list
+     of shell builtins is printed.  With no other arguments, the list
+     consists of all enabled shell builtins.  The '-a' option means to
+     list each builtin with an indication of whether or not it is
+     enabled.
+
+     The '-f' option means to load the new builtin command NAME from
+     shared object FILENAME, on systems that support dynamic loading.
+     The '-d' option will delete a builtin loaded with '-f'.
+
+     If there are no options, a list of the shell builtins is displayed.
+     The '-s' option restricts 'enable' to the POSIX special builtins.
+     If '-s' is used with '-f', the new builtin becomes a special
+     builtin (*note Special Builtins::).
+
+     The return status is zero unless a NAME is not a shell builtin or
+     there is an error loading a new builtin from a shared object.
+
+'help'
+          help [-dms] [PATTERN]
+
+     Display helpful information about builtin commands.  If PATTERN is
+     specified, 'help' gives detailed help on all commands matching
+     PATTERN, otherwise a list of the builtins is printed.
+
+     Options, if supplied, have the following meanings:
+
+     '-d'
+          Display a short description of each PATTERN
+     '-m'
+          Display the description of each PATTERN in a manpage-like
+          format
+     '-s'
+          Display only a short usage synopsis for each PATTERN
+
+     The return status is zero unless no command matches PATTERN.
+
+'let'
+          let EXPRESSION [EXPRESSION ...]
+
+     The 'let' builtin allows arithmetic to be performed on shell
+     variables.  Each EXPRESSION is evaluated according to the rules
+     given below in *note Shell Arithmetic::.  If the last EXPRESSION
+     evaluates to 0, 'let' returns 1; otherwise 0 is returned.
+
+'local'
+          local [OPTION] NAME[=VALUE] ...
+
+     For each argument, a local variable named NAME is created, and
+     assigned VALUE.  The OPTION can be any of the options accepted by
+     'declare'.  'local' can only be used within a function; it makes
+     the variable NAME have a visible scope restricted to that function
+     and its children.  If NAME is '-', the set of shell options is made
+     local to the function in which 'local' is invoked: shell options
+     changed using the 'set' builtin inside the function are restored to
+     their original values when the function returns.  The restore is
+     effected as if a series of 'set' commands were executed to restore
+     the values that were in place before the function.  The return
+     status is zero unless 'local' is used outside a function, an
+     invalid NAME is supplied, or NAME is a readonly variable.
+
+'logout'
+          logout [N]
+
+     Exit a login shell, returning a status of N to the shell's parent.
+
+'mapfile'
+          mapfile [-d DELIM] [-n COUNT] [-O ORIGIN] [-s COUNT]
+              [-t] [-u FD] [-C CALLBACK] [-c QUANTUM] [ARRAY]
+
+     Read lines from the standard input into the indexed array variable
+     ARRAY, or from file descriptor FD if the '-u' option is supplied.
+     The variable 'MAPFILE' is the default ARRAY.  Options, if supplied,
+     have the following meanings:
+
+     '-d'
+          The first character of DELIM is used to terminate each input
+          line, rather than newline.  If DELIM is the empty string,
+          'mapfile' will terminate a line when it reads a NUL character.
+     '-n'
+          Copy at most COUNT lines.  If COUNT is 0, all lines are
+          copied.
+     '-O'
+          Begin assigning to ARRAY at index ORIGIN.  The default index
+          is 0.
+     '-s'
+          Discard the first COUNT lines read.
+     '-t'
+          Remove a trailing DELIM (default newline) from each line read.
+     '-u'
+          Read lines from file descriptor FD instead of the standard
+          input.
+     '-C'
+          Evaluate CALLBACK each time QUANTUM lines are read.  The '-c'
+          option specifies QUANTUM.
+     '-c'
+          Specify the number of lines read between each call to
+          CALLBACK.
+
+     If '-C' is specified without '-c', the default quantum is 5000.
+     When CALLBACK is evaluated, it is supplied the index of the next
+     array element to be assigned and the line to be assigned to that
+     element as additional arguments.  CALLBACK is evaluated after the
+     line is read but before the array element is assigned.
+
+     If not supplied with an explicit origin, 'mapfile' will clear ARRAY
+     before assigning to it.
+
+     'mapfile' returns successfully unless an invalid option or option
+     argument is supplied, ARRAY is invalid or unassignable, or ARRAY is
+     not an indexed array.
+
+'printf'
+          printf [-v VAR] FORMAT [ARGUMENTS]
+
+     Write the formatted ARGUMENTS to the standard output under the
+     control of the FORMAT.  The '-v' option causes the output to be
+     assigned to the variable VAR rather than being printed to the
+     standard output.
+
+     The FORMAT is a character string which contains three types of
+     objects: plain characters, which are simply copied to standard
+     output, character escape sequences, which are converted and copied
+     to the standard output, and format specifications, each of which
+     causes printing of the next successive ARGUMENT.  In addition to
+     the standard 'printf(1)' formats, 'printf' interprets the following
+     extensions:
+
+     '%b'
+          Causes 'printf' to expand backslash escape sequences in the
+          corresponding ARGUMENT in the same way as 'echo -e' (*note
+          Bash Builtins::).
+     '%q'
+          Causes 'printf' to output the corresponding ARGUMENT in a
+          format that can be reused as shell input.
+     '%(DATEFMT)T'
+          Causes 'printf' to output the date-time string resulting from
+          using DATEFMT as a format string for 'strftime'(3).  The
+          corresponding ARGUMENT is an integer representing the number
+          of seconds since the epoch.  Two special argument values may
+          be used: -1 represents the current time, and -2 represents the
+          time the shell was invoked.  If no argument is specified,
+          conversion behaves as if -1 had been given.  This is an
+          exception to the usual 'printf' behavior.
+
+     The %b, %q, and %T directives all use the field width and precision
+     arguments from the format specification and write that many bytes
+     from (or use that wide a field for) the expanded argument, which
+     usually contains more characters than the original.
+
+     Arguments to non-string format specifiers are treated as C language
+     constants, except that a leading plus or minus sign is allowed, and
+     if the leading character is a single or double quote, the value is
+     the ASCII value of the following character.
+
+     The FORMAT is reused as necessary to consume all of the ARGUMENTS.
+     If the FORMAT requires more ARGUMENTS than are supplied, the extra
+     format specifications behave as if a zero value or null string, as
+     appropriate, had been supplied.  The return value is zero on
+     success, non-zero on failure.
+
+'read'
+          read [-ers] [-a ANAME] [-d DELIM] [-i TEXT] [-n NCHARS]
+              [-N NCHARS] [-p PROMPT] [-t TIMEOUT] [-u FD] [NAME ...]
+
+     One line is read from the standard input, or from the file
+     descriptor FD supplied as an argument to the '-u' option, split
+     into words as described above in *note Word Splitting::, and the
+     first word is assigned to the first NAME, the second word to the
+     second NAME, and so on.  If there are more words than names, the
+     remaining words and their intervening delimiters are assigned to
+     the last NAME.  If there are fewer words read from the input stream
+     than names, the remaining names are assigned empty values.  The
+     characters in the value of the 'IFS' variable are used to split the
+     line into words using the same rules the shell uses for expansion
+     (described above in *note Word Splitting::).  The backslash
+     character '\' may be used to remove any special meaning for the
+     next character read and for line continuation.
+
+     Options, if supplied, have the following meanings:
+
+     '-a ANAME'
+          The words are assigned to sequential indices of the array
+          variable ANAME, starting at 0.  All elements are removed from
+          ANAME before the assignment.  Other NAME arguments are
+          ignored.
+
+     '-d DELIM'
+          The first character of DELIM is used to terminate the input
+          line, rather than newline.  If DELIM is the empty string,
+          'read' will terminate a line when it reads a NUL character.
+
+     '-e'
+          Readline (*note Command Line Editing::) is used to obtain the
+          line.  Readline uses the current (or default, if line editing
+          was not previously active) editing settings, but uses
+          Readline's default filename completion.
+
+     '-i TEXT'
+          If Readline is being used to read the line, TEXT is placed
+          into the editing buffer before editing begins.
+
+     '-n NCHARS'
+          'read' returns after reading NCHARS characters rather than
+          waiting for a complete line of input, but honors a delimiter
+          if fewer than NCHARS characters are read before the delimiter.
+
+     '-N NCHARS'
+          'read' returns after reading exactly NCHARS characters rather
+          than waiting for a complete line of input, unless EOF is
+          encountered or 'read' times out.  Delimiter characters
+          encountered in the input are not treated specially and do not
+          cause 'read' to return until NCHARS characters are read.  The
+          result is not split on the characters in 'IFS'; the intent is
+          that the variable is assigned exactly the characters read
+          (with the exception of backslash; see the '-r' option below).
+
+     '-p PROMPT'
+          Display PROMPT, without a trailing newline, before attempting
+          to read any input.  The prompt is displayed only if input is
+          coming from a terminal.
+
+     '-r'
+          If this option is given, backslash does not act as an escape
+          character.  The backslash is considered to be part of the
+          line.  In particular, a backslash-newline pair may not then be
+          used as a line continuation.
+
+     '-s'
+          Silent mode.  If input is coming from a terminal, characters
+          are not echoed.
+
+     '-t TIMEOUT'
+          Cause 'read' to time out and return failure if a complete line
+          of input (or a specified number of characters) is not read
+          within TIMEOUT seconds.  TIMEOUT may be a decimal number with
+          a fractional portion following the decimal point.  This option
+          is only effective if 'read' is reading input from a terminal,
+          pipe, or other special file; it has no effect when reading
+          from regular files.  If 'read' times out, 'read' saves any
+          partial input read into the specified variable NAME.  If
+          TIMEOUT is 0, 'read' returns immediately, without trying to
+          read any data.  The exit status is 0 if input is available on
+          the specified file descriptor, non-zero otherwise.  The exit
+          status is greater than 128 if the timeout is exceeded.
+
+     '-u FD'
+          Read input from file descriptor FD.
+
+     If no NAMEs are supplied, the line read, without the ending
+     delimiter but otherwise unmodified, is assigned to the variable
+     'REPLY'.  The exit status is zero, unless end-of-file is
+     encountered, 'read' times out (in which case the status is greater
+     than 128), a variable assignment error (such as assigning to a
+     readonly variable) occurs, or an invalid file descriptor is
+     supplied as the argument to '-u'.
+
+'readarray'
+          readarray [-d DELIM] [-n COUNT] [-O ORIGIN] [-s COUNT]
+              [-t] [-u FD] [-C CALLBACK] [-c QUANTUM] [ARRAY]
+
+     Read lines from the standard input into the indexed array variable
+     ARRAY, or from file descriptor FD if the '-u' option is supplied.
+
+     A synonym for 'mapfile'.
+
+'source'
+          source FILENAME
+
+     A synonym for '.' (*note Bourne Shell Builtins::).
+
+'type'
+          type [-afptP] [NAME ...]
+
+     For each NAME, indicate how it would be interpreted if used as a
+     command name.
+
+     If the '-t' option is used, 'type' prints a single word which is
+     one of 'alias', 'function', 'builtin', 'file' or 'keyword', if NAME
+     is an alias, shell function, shell builtin, disk file, or shell
+     reserved word, respectively.  If the NAME is not found, then
+     nothing is printed, and 'type' returns a failure status.
+
+     If the '-p' option is used, 'type' either returns the name of the
+     disk file that would be executed, or nothing if '-t' would not
+     return 'file'.
+
+     The '-P' option forces a path search for each NAME, even if '-t'
+     would not return 'file'.
+
+     If a command is hashed, '-p' and '-P' print the hashed value, which
+     is not necessarily the file that appears first in '$PATH'.
+
+     If the '-a' option is used, 'type' returns all of the places that
+     contain an executable named FILE.  This includes aliases and
+     functions, if and only if the '-p' option is not also used.
+
+     If the '-f' option is used, 'type' does not attempt to find shell
+     functions, as with the 'command' builtin.
+
+     The return status is zero if all of the NAMES are found, non-zero
+     if any are not found.
+
+'typeset'
+          typeset [-afFgrxilnrtux] [-p] [NAME[=VALUE] ...]
+
+     The 'typeset' command is supplied for compatibility with the Korn
+     shell.  It is a synonym for the 'declare' builtin command.
+
+'ulimit'
+          ulimit [-HS] -a
+          ulimit [-HS] [-bcdefiklmnpqrstuvxPRT] [LIMIT]
+
+     'ulimit' provides control over the resources available to processes
+     started by the shell, on systems that allow such control.  If an
+     option is given, it is interpreted as follows:
+
+     '-S'
+          Change and report the soft limit associated with a resource.
+
+     '-H'
+          Change and report the hard limit associated with a resource.
+
+     '-a'
+          All current limits are reported; no limits are set.
+
+     '-b'
+          The maximum socket buffer size.
+
+     '-c'
+          The maximum size of core files created.
+
+     '-d'
+          The maximum size of a process's data segment.
+
+     '-e'
+          The maximum scheduling priority ("nice").
+
+     '-f'
+          The maximum size of files written by the shell and its
+          children.
+
+     '-i'
+          The maximum number of pending signals.
+
+     '-k'
+          The maximum number of kqueues that may be allocated.
+
+     '-l'
+          The maximum size that may be locked into memory.
+
+     '-m'
+          The maximum resident set size (many systems do not honor this
+          limit).
+
+     '-n'
+          The maximum number of open file descriptors (most systems do
+          not allow this value to be set).
+
+     '-p'
+          The pipe buffer size.
+
+     '-q'
+          The maximum number of bytes in POSIX message queues.
+
+     '-r'
+          The maximum real-time scheduling priority.
+
+     '-s'
+          The maximum stack size.
+
+     '-t'
+          The maximum amount of cpu time in seconds.
+
+     '-u'
+          The maximum number of processes available to a single user.
+
+     '-v'
+          The maximum amount of virtual memory available to the shell,
+          and, on some systems, to its children.
+
+     '-x'
+          The maximum number of file locks.
+
+     '-P'
+          The maximum number of pseudoterminals.
+
+     '-R'
+          The maximum time a real-time process can run before blocking,
+          in microseconds.
+
+     '-T'
+          The maximum number of threads.
+
+     If LIMIT is given, and the '-a' option is not used, LIMIT is the
+     new value of the specified resource.  The special LIMIT values
+     'hard', 'soft', and 'unlimited' stand for the current hard limit,
+     the current soft limit, and no limit, respectively.  A hard limit
+     cannot be increased by a non-root user once it is set; a soft limit
+     may be increased up to the value of the hard limit.  Otherwise, the
+     current value of the soft limit for the specified resource is
+     printed, unless the '-H' option is supplied.  When more than one
+     resource is specified, the limit name and unit, if appropriate, are
+     printed before the value.  When setting new limits, if neither '-H'
+     nor '-S' is supplied, both the hard and soft limits are set.  If no
+     option is given, then '-f' is assumed.  Values are in 1024-byte
+     increments, except for '-t', which is in seconds; '-R', which is in
+     microseconds; '-p', which is in units of 512-byte blocks; '-P',
+     '-T', '-b', '-k', '-n' and '-u', which are unscaled values; and,
+     when in POSIX Mode (*note Bash POSIX Mode::), '-c' and '-f', which
+     are in 512-byte increments.
+
+     The return status is zero unless an invalid option or argument is
+     supplied, or an error occurs while setting a new limit.
+
+'unalias'
+          unalias [-a] [NAME ... ]
+
+     Remove each NAME from the list of aliases.  If '-a' is supplied,
+     all aliases are removed.  Aliases are described in *note Aliases::.
+
+
+File: bashref.info,  Node: Modifying Shell Behavior,  Next: Special Builtins,  Prev: Bash Builtins,  Up: Shell Builtin Commands
+
+4.3 Modifying Shell Behavior
+============================
+
+* Menu:
+
+* The Set Builtin::		Change the values of shell attributes and
+				positional parameters.
+* The Shopt Builtin::		Modify shell optional behavior.
+
+
+File: bashref.info,  Node: The Set Builtin,  Next: The Shopt Builtin,  Up: Modifying Shell Behavior
+
+4.3.1 The Set Builtin
+---------------------
+
+This builtin is so complicated that it deserves its own section.  'set'
+allows you to change the values of shell options and set the positional
+parameters, or to display the names and values of shell variables.
+
+'set'
+          set [--abefhkmnptuvxBCEHPT] [-o OPTION-NAME] [ARGUMENT ...]
+          set [+abefhkmnptuvxBCEHPT] [+o OPTION-NAME] [ARGUMENT ...]
+
+     If no options or arguments are supplied, 'set' displays the names
+     and values of all shell variables and functions, sorted according
+     to the current locale, in a format that may be reused as input for
+     setting or resetting the currently-set variables.  Read-only
+     variables cannot be reset.  In POSIX mode, only shell variables are
+     listed.
+
+     When options are supplied, they set or unset shell attributes.
+     Options, if specified, have the following meanings:
+
+     '-a'
+          Each variable or function that is created or modified is given
+          the export attribute and marked for export to the environment
+          of subsequent commands.
+
+     '-b'
+          Cause the status of terminated background jobs to be reported
+          immediately, rather than before printing the next primary
+          prompt.
+
+     '-e'
+          Exit immediately if a pipeline (*note Pipelines::), which may
+          consist of a single simple command (*note Simple Commands::),
+          a list (*note Lists::), or a compound command (*note Compound
+          Commands::) returns a non-zero status.  The shell does not
+          exit if the command that fails is part of the command list
+          immediately following a 'while' or 'until' keyword, part of
+          the test in an 'if' statement, part of any command executed in
+          a '&&' or '||' list except the command following the final
+          '&&' or '||', any command in a pipeline but the last, or if
+          the command's return status is being inverted with '!'.  If a
+          compound command other than a subshell returns a non-zero
+          status because a command failed while '-e' was being ignored,
+          the shell does not exit.  A trap on 'ERR', if set, is executed
+          before the shell exits.
+
+          This option applies to the shell environment and each subshell
+          environment separately (*note Command Execution
+          Environment::), and may cause subshells to exit before
+          executing all the commands in the subshell.
+
+          If a compound command or shell function executes in a context
+          where '-e' is being ignored, none of the commands executed
+          within the compound command or function body will be affected
+          by the '-e' setting, even if '-e' is set and a command returns
+          a failure status.  If a compound command or shell function
+          sets '-e' while executing in a context where '-e' is ignored,
+          that setting will not have any effect until the compound
+          command or the command containing the function call completes.
+
+     '-f'
+          Disable filename expansion (globbing).
+
+     '-h'
+          Locate and remember (hash) commands as they are looked up for
+          execution.  This option is enabled by default.
+
+     '-k'
+          All arguments in the form of assignment statements are placed
+          in the environment for a command, not just those that precede
+          the command name.
+
+     '-m'
+          Job control is enabled (*note Job Control::).  All processes
+          run in a separate process group.  When a background job
+          completes, the shell prints a line containing its exit status.
+
+     '-n'
+          Read commands but do not execute them.  This may be used to
+          check a script for syntax errors.  This option is ignored by
+          interactive shells.
+
+     '-o OPTION-NAME'
+
+          Set the option corresponding to OPTION-NAME:
+
+          'allexport'
+               Same as '-a'.
+
+          'braceexpand'
+               Same as '-B'.
+
+          'emacs'
+               Use an 'emacs'-style line editing interface (*note
+               Command Line Editing::).  This also affects the editing
+               interface used for 'read -e'.
+
+          'errexit'
+               Same as '-e'.
+
+          'errtrace'
+               Same as '-E'.
+
+          'functrace'
+               Same as '-T'.
+
+          'hashall'
+               Same as '-h'.
+
+          'histexpand'
+               Same as '-H'.
+
+          'history'
+               Enable command history, as described in *note Bash
+               History Facilities::.  This option is on by default in
+               interactive shells.
+
+          'ignoreeof'
+               An interactive shell will not exit upon reading EOF.
+
+          'keyword'
+               Same as '-k'.
+
+          'monitor'
+               Same as '-m'.
+
+          'noclobber'
+               Same as '-C'.
+
+          'noexec'
+               Same as '-n'.
+
+          'noglob'
+               Same as '-f'.
+
+          'nolog'
+               Currently ignored.
+
+          'notify'
+               Same as '-b'.
+
+          'nounset'
+               Same as '-u'.
+
+          'onecmd'
+               Same as '-t'.
+
+          'physical'
+               Same as '-P'.
+
+          'pipefail'
+               If set, the return value of a pipeline is the value of
+               the last (rightmost) command to exit with a non-zero
+               status, or zero if all commands in the pipeline exit
+               successfully.  This option is disabled by default.
+
+          'posix'
+               Change the behavior of Bash where the default operation
+               differs from the POSIX standard to match the standard
+               (*note Bash POSIX Mode::).  This is intended to make Bash
+               behave as a strict superset of that standard.
+
+          'privileged'
+               Same as '-p'.
+
+          'verbose'
+               Same as '-v'.
+
+          'vi'
+               Use a 'vi'-style line editing interface.  This also
+               affects the editing interface used for 'read -e'.
+
+          'xtrace'
+               Same as '-x'.
+
+     '-p'
+          Turn on privileged mode.  In this mode, the '$BASH_ENV' and
+          '$ENV' files are not processed, shell functions are not
+          inherited from the environment, and the 'SHELLOPTS',
+          'BASHOPTS', 'CDPATH' and 'GLOBIGNORE' variables, if they
+          appear in the environment, are ignored.  If the shell is
+          started with the effective user (group) id not equal to the
+          real user (group) id, and the '-p' option is not supplied,
+          these actions are taken and the effective user id is set to
+          the real user id.  If the '-p' option is supplied at startup,
+          the effective user id is not reset.  Turning this option off
+          causes the effective user and group ids to be set to the real
+          user and group ids.
+
+     '-t'
+          Exit after reading and executing one command.
+
+     '-u'
+          Treat unset variables and parameters other than the special
+          parameters '@' or '*' as an error when performing parameter
+          expansion.  An error message will be written to the standard
+          error, and a non-interactive shell will exit.
+
+     '-v'
+          Print shell input lines as they are read.
+
+     '-x'
+          Print a trace of simple commands, 'for' commands, 'case'
+          commands, 'select' commands, and arithmetic 'for' commands and
+          their arguments or associated word lists after they are
+          expanded and before they are executed.  The value of the 'PS4'
+          variable is expanded and the resultant value is printed before
+          the command and its expanded arguments.
+
+     '-B'
+          The shell will perform brace expansion (*note Brace
+          Expansion::).  This option is on by default.
+
+     '-C'
+          Prevent output redirection using '>', '>&', and '<>' from
+          overwriting existing files.
+
+     '-E'
+          If set, any trap on 'ERR' is inherited by shell functions,
+          command substitutions, and commands executed in a subshell
+          environment.  The 'ERR' trap is normally not inherited in such
+          cases.
+
+     '-H'
+          Enable '!' style history substitution (*note History
+          Interaction::).  This option is on by default for interactive
+          shells.
+
+     '-P'
+          If set, do not resolve symbolic links when performing commands
+          such as 'cd' which change the current directory.  The physical
+          directory is used instead.  By default, Bash follows the
+          logical chain of directories when performing commands which
+          change the current directory.
+
+          For example, if '/usr/sys' is a symbolic link to
+          '/usr/local/sys' then:
+               $ cd /usr/sys; echo $PWD
+               /usr/sys
+               $ cd ..; pwd
+               /usr
+
+          If 'set -P' is on, then:
+               $ cd /usr/sys; echo $PWD
+               /usr/local/sys
+               $ cd ..; pwd
+               /usr/local
+
+     '-T'
+          If set, any trap on 'DEBUG' and 'RETURN' are inherited by
+          shell functions, command substitutions, and commands executed
+          in a subshell environment.  The 'DEBUG' and 'RETURN' traps are
+          normally not inherited in such cases.
+
+     '--'
+          If no arguments follow this option, then the positional
+          parameters are unset.  Otherwise, the positional parameters
+          are set to the ARGUMENTS, even if some of them begin with a
+          '-'.
+
+     '-'
+          Signal the end of options, cause all remaining ARGUMENTS to be
+          assigned to the positional parameters.  The '-x' and '-v'
+          options are turned off.  If there are no arguments, the
+          positional parameters remain unchanged.
+
+     Using '+' rather than '-' causes these options to be turned off.
+     The options can also be used upon invocation of the shell.  The
+     current set of options may be found in '$-'.
+
+     The remaining N ARGUMENTS are positional parameters and are
+     assigned, in order, to '$1', '$2', ... '$N'.  The special parameter
+     '#' is set to N.
+
+     The return status is always zero unless an invalid option is
+     supplied.
+
+
+File: bashref.info,  Node: The Shopt Builtin,  Prev: The Set Builtin,  Up: Modifying Shell Behavior
+
+4.3.2 The Shopt Builtin
+-----------------------
+
+This builtin allows you to change additional shell optional behavior.
+
+'shopt'
+          shopt [-pqsu] [-o] [OPTNAME ...]
+
+     Toggle the values of settings controlling optional shell behavior.
+     The settings can be either those listed below, or, if the '-o'
+     option is used, those available with the '-o' option to the 'set'
+     builtin command (*note The Set Builtin::).  With no options, or
+     with the '-p' option, a list of all settable options is displayed,
+     with an indication of whether or not each is set; if OPTNAMES are
+     supplied, the output is restricted to those options.  The '-p'
+     option causes output to be displayed in a form that may be reused
+     as input.  Other options have the following meanings:
+
+     '-s'
+          Enable (set) each OPTNAME.
+
+     '-u'
+          Disable (unset) each OPTNAME.
+
+     '-q'
+          Suppresses normal output; the return status indicates whether
+          the OPTNAME is set or unset.  If multiple OPTNAME arguments
+          are given with '-q', the return status is zero if all OPTNAMES
+          are enabled; non-zero otherwise.
+
+     '-o'
+          Restricts the values of OPTNAME to be those defined for the
+          '-o' option to the 'set' builtin (*note The Set Builtin::).
+
+     If either '-s' or '-u' is used with no OPTNAME arguments, 'shopt'
+     shows only those options which are set or unset, respectively.
+
+     Unless otherwise noted, the 'shopt' options are disabled (off) by
+     default.
+
+     The return status when listing options is zero if all OPTNAMES are
+     enabled, non-zero otherwise.  When setting or unsetting options,
+     the return status is zero unless an OPTNAME is not a valid shell
+     option.
+
+     The list of 'shopt' options is:
+
+     'assoc_expand_once'
+          If set, the shell suppresses multiple evaluation of
+          associative array subscripts during arithmetic expression
+          evaluation, while executing builtins that can perform variable
+          assignments, and while executing builtins that perform array
+          dereferencing.
+
+     'autocd'
+          If set, a command name that is the name of a directory is
+          executed as if it were the argument to the 'cd' command.  This
+          option is only used by interactive shells.
+
+     'cdable_vars'
+          If this is set, an argument to the 'cd' builtin command that
+          is not a directory is assumed to be the name of a variable
+          whose value is the directory to change to.
+
+     'cdspell'
+          If set, minor errors in the spelling of a directory component
+          in a 'cd' command will be corrected.  The errors checked for
+          are transposed characters, a missing character, and a
+          character too many.  If a correction is found, the corrected
+          path is printed, and the command proceeds.  This option is
+          only used by interactive shells.
+
+     'checkhash'
+          If this is set, Bash checks that a command found in the hash
+          table exists before trying to execute it.  If a hashed command
+          no longer exists, a normal path search is performed.
+
+     'checkjobs'
+          If set, Bash lists the status of any stopped and running jobs
+          before exiting an interactive shell.  If any jobs are running,
+          this causes the exit to be deferred until a second exit is
+          attempted without an intervening command (*note Job
+          Control::).  The shell always postpones exiting if any jobs
+          are stopped.
+
+     'checkwinsize'
+          If set, Bash checks the window size after each external
+          (non-builtin) command and, if necessary, updates the values of
+          'LINES' and 'COLUMNS'.  This option is enabled by default.
+
+     'cmdhist'
+          If set, Bash attempts to save all lines of a multiple-line
+          command in the same history entry.  This allows easy
+          re-editing of multi-line commands.  This option is enabled by
+          default, but only has an effect if command history is enabled
+          (*note Bash History Facilities::).
+
+     'compat31'
+     'compat32'
+     'compat40'
+     'compat41'
+     'compat42'
+     'compat43'
+     'compat44'
+          These control aspects of the shell's compatibility mode (*note
+          Shell Compatibility Mode::).
+
+     'complete_fullquote'
+          If set, Bash quotes all shell metacharacters in filenames and
+          directory names when performing completion.  If not set, Bash
+          removes metacharacters such as the dollar sign from the set of
+          characters that will be quoted in completed filenames when
+          these metacharacters appear in shell variable references in
+          words to be completed.  This means that dollar signs in
+          variable names that expand to directories will not be quoted;
+          however, any dollar signs appearing in filenames will not be
+          quoted, either.  This is active only when bash is using
+          backslashes to quote completed filenames.  This variable is
+          set by default, which is the default Bash behavior in versions
+          through 4.2.
+
+     'direxpand'
+          If set, Bash replaces directory names with the results of word
+          expansion when performing filename completion.  This changes
+          the contents of the readline editing buffer.  If not set, Bash
+          attempts to preserve what the user typed.
+
+     'dirspell'
+          If set, Bash attempts spelling correction on directory names
+          during word completion if the directory name initially
+          supplied does not exist.
+
+     'dotglob'
+          If set, Bash includes filenames beginning with a '.'  in the
+          results of filename expansion.  The filenames '.' and '..'
+          must always be matched explicitly, even if 'dotglob' is set.
+
+     'execfail'
+          If this is set, a non-interactive shell will not exit if it
+          cannot execute the file specified as an argument to the 'exec'
+          builtin command.  An interactive shell does not exit if 'exec'
+          fails.
+
+     'expand_aliases'
+          If set, aliases are expanded as described below under Aliases,
+          *note Aliases::.  This option is enabled by default for
+          interactive shells.
+
+     'extdebug'
+          If set at shell invocation, or in a shell startup file,
+          arrange to execute the debugger profile before the shell
+          starts, identical to the '--debugger' option.  If set after
+          invocation, behavior intended for use by debuggers is enabled:
+
+            1. The '-F' option to the 'declare' builtin (*note Bash
+               Builtins::) displays the source file name and line number
+               corresponding to each function name supplied as an
+               argument.
+
+            2. If the command run by the 'DEBUG' trap returns a non-zero
+               value, the next command is skipped and not executed.
+
+            3. If the command run by the 'DEBUG' trap returns a value of
+               2, and the shell is executing in a subroutine (a shell
+               function or a shell script executed by the '.' or
+               'source' builtins), the shell simulates a call to
+               'return'.
+
+            4. 'BASH_ARGC' and 'BASH_ARGV' are updated as described in
+               their descriptions (*note Bash Variables::).
+
+            5. Function tracing is enabled: command substitution, shell
+               functions, and subshells invoked with '( COMMAND )'
+               inherit the 'DEBUG' and 'RETURN' traps.
+
+            6. Error tracing is enabled: command substitution, shell
+               functions, and subshells invoked with '( COMMAND )'
+               inherit the 'ERR' trap.
+
+     'extglob'
+          If set, the extended pattern matching features described above
+          (*note Pattern Matching::) are enabled.
+
+     'extquote'
+          If set, '$'STRING'' and '$"STRING"' quoting is performed
+          within '${PARAMETER}' expansions enclosed in double quotes.
+          This option is enabled by default.
+
+     'failglob'
+          If set, patterns which fail to match filenames during filename
+          expansion result in an expansion error.
+
+     'force_fignore'
+          If set, the suffixes specified by the 'FIGNORE' shell variable
+          cause words to be ignored when performing word completion even
+          if the ignored words are the only possible completions.  *Note
+          Bash Variables::, for a description of 'FIGNORE'.  This option
+          is enabled by default.
+
+     'globasciiranges'
+          If set, range expressions used in pattern matching bracket
+          expressions (*note Pattern Matching::) behave as if in the
+          traditional C locale when performing comparisons.  That is,
+          the current locale's collating sequence is not taken into
+          account, so 'b' will not collate between 'A' and 'B', and
+          upper-case and lower-case ASCII characters will collate
+          together.
+
+     'globstar'
+          If set, the pattern '**' used in a filename expansion context
+          will match all files and zero or more directories and
+          subdirectories.  If the pattern is followed by a '/', only
+          directories and subdirectories match.
+
+     'gnu_errfmt'
+          If set, shell error messages are written in the standard GNU
+          error message format.
+
+     'histappend'
+          If set, the history list is appended to the file named by the
+          value of the 'HISTFILE' variable when the shell exits, rather
+          than overwriting the file.
+
+     'histreedit'
+          If set, and Readline is being used, a user is given the
+          opportunity to re-edit a failed history substitution.
+
+     'histverify'
+          If set, and Readline is being used, the results of history
+          substitution are not immediately passed to the shell parser.
+          Instead, the resulting line is loaded into the Readline
+          editing buffer, allowing further modification.
+
+     'hostcomplete'
+          If set, and Readline is being used, Bash will attempt to
+          perform hostname completion when a word containing a '@' is
+          being completed (*note Commands For Completion::).  This
+          option is enabled by default.
+
+     'huponexit'
+          If set, Bash will send 'SIGHUP' to all jobs when an
+          interactive login shell exits (*note Signals::).
+
+     'inherit_errexit'
+          If set, command substitution inherits the value of the
+          'errexit' option, instead of unsetting it in the subshell
+          environment.  This option is enabled when POSIX mode is
+          enabled.
+
+     'interactive_comments'
+          Allow a word beginning with '#' to cause that word and all
+          remaining characters on that line to be ignored in an
+          interactive shell.  This option is enabled by default.
+
+     'lastpipe'
+          If set, and job control is not active, the shell runs the last
+          command of a pipeline not executed in the background in the
+          current shell environment.
+
+     'lithist'
+          If enabled, and the 'cmdhist' option is enabled, multi-line
+          commands are saved to the history with embedded newlines
+          rather than using semicolon separators where possible.
+
+     'localvar_inherit'
+          If set, local variables inherit the value and attributes of a
+          variable of the same name that exists at a previous scope
+          before any new value is assigned.  The NAMEREF attribute is
+          not inherited.
+
+     'localvar_unset'
+          If set, calling 'unset' on local variables in previous
+          function scopes marks them so subsequent lookups find them
+          unset until that function returns.  This is identical to the
+          behavior of unsetting local variables at the current function
+          scope.
+
+     'login_shell'
+          The shell sets this option if it is started as a login shell
+          (*note Invoking Bash::).  The value may not be changed.
+
+     'mailwarn'
+          If set, and a file that Bash is checking for mail has been
+          accessed since the last time it was checked, the message '"The
+          mail in MAILFILE has been read"' is displayed.
+
+     'no_empty_cmd_completion'
+          If set, and Readline is being used, Bash will not attempt to
+          search the 'PATH' for possible completions when completion is
+          attempted on an empty line.
+
+     'nocaseglob'
+          If set, Bash matches filenames in a case-insensitive fashion
+          when performing filename expansion.
+
+     'nocasematch'
+          If set, Bash matches patterns in a case-insensitive fashion
+          when performing matching while executing 'case' or '[['
+          conditional commands, when performing pattern substitution
+          word expansions, or when filtering possible completions as
+          part of programmable completion.
+
+     'nullglob'
+          If set, Bash allows filename patterns which match no files to
+          expand to a null string, rather than themselves.
+
+     'progcomp'
+          If set, the programmable completion facilities (*note
+          Programmable Completion::) are enabled.  This option is
+          enabled by default.
+
+     'progcomp_alias'
+          If set, and programmable completion is enabled, Bash treats a
+          command name that doesn't have any completions as a possible
+          alias and attempts alias expansion.  If it has an alias, Bash
+          attempts programmable completion using the command word
+          resulting from the expanded alias.
+
+     'promptvars'
+          If set, prompt strings undergo parameter expansion, command
+          substitution, arithmetic expansion, and quote removal after
+          being expanded as described below (*note Controlling the
+          Prompt::).  This option is enabled by default.
+
+     'restricted_shell'
+          The shell sets this option if it is started in restricted mode
+          (*note The Restricted Shell::).  The value may not be changed.
+          This is not reset when the startup files are executed,
+          allowing the startup files to discover whether or not a shell
+          is restricted.
+
+     'shift_verbose'
+          If this is set, the 'shift' builtin prints an error message
+          when the shift count exceeds the number of positional
+          parameters.
+
+     'sourcepath'
+          If set, the 'source' builtin uses the value of 'PATH' to find
+          the directory containing the file supplied as an argument.
+          This option is enabled by default.
+
+     'xpg_echo'
+          If set, the 'echo' builtin expands backslash-escape sequences
+          by default.
+
+
+File: bashref.info,  Node: Special Builtins,  Prev: Modifying Shell Behavior,  Up: Shell Builtin Commands
+
+4.4 Special Builtins
+====================
+
+For historical reasons, the POSIX standard has classified several
+builtin commands as _special_.  When Bash is executing in POSIX mode,
+the special builtins differ from other builtin commands in three
+respects:
+
+  1. Special builtins are found before shell functions during command
+     lookup.
+
+  2. If a special builtin returns an error status, a non-interactive
+     shell exits.
+
+  3. Assignment statements preceding the command stay in effect in the
+     shell environment after the command completes.
+
+   When Bash is not executing in POSIX mode, these builtins behave no
+differently than the rest of the Bash builtin commands.  The Bash POSIX
+mode is described in *note Bash POSIX Mode::.
+
+   These are the POSIX special builtins:
+     break : . continue eval exec exit export readonly return set
+     shift trap unset
+
+
+File: bashref.info,  Node: Shell Variables,  Next: Bash Features,  Prev: Shell Builtin Commands,  Up: Top
+
+5 Shell Variables
+*****************
+
+* Menu:
+
+* Bourne Shell Variables::	Variables which Bash uses in the same way
+				as the Bourne Shell.
+* Bash Variables::		List of variables that exist in Bash.
+
+This chapter describes the shell variables that Bash uses.  Bash
+automatically assigns default values to a number of variables.
+
+
+File: bashref.info,  Node: Bourne Shell Variables,  Next: Bash Variables,  Up: Shell Variables
+
+5.1 Bourne Shell Variables
+==========================
+
+Bash uses certain shell variables in the same way as the Bourne shell.
+In some cases, Bash assigns a default value to the variable.
+
+'CDPATH'
+     A colon-separated list of directories used as a search path for the
+     'cd' builtin command.
+
+'HOME'
+     The current user's home directory; the default for the 'cd' builtin
+     command.  The value of this variable is also used by tilde
+     expansion (*note Tilde Expansion::).
+
+'IFS'
+     A list of characters that separate fields; used when the shell
+     splits words as part of expansion.
+
+'MAIL'
+     If this parameter is set to a filename or directory name and the
+     'MAILPATH' variable is not set, Bash informs the user of the
+     arrival of mail in the specified file or Maildir-format directory.
+
+'MAILPATH'
+     A colon-separated list of filenames which the shell periodically
+     checks for new mail.  Each list entry can specify the message that
+     is printed when new mail arrives in the mail file by separating the
+     filename from the message with a '?'.  When used in the text of the
+     message, '$_' expands to the name of the current mail file.
+
+'OPTARG'
+     The value of the last option argument processed by the 'getopts'
+     builtin.
+
+'OPTIND'
+     The index of the last option argument processed by the 'getopts'
+     builtin.
+
+'PATH'
+     A colon-separated list of directories in which the shell looks for
+     commands.  A zero-length (null) directory name in the value of
+     'PATH' indicates the current directory.  A null directory name may
+     appear as two adjacent colons, or as an initial or trailing colon.
+
+'PS1'
+     The primary prompt string.  The default value is '\s-\v\$ '.  *Note
+     Controlling the Prompt::, for the complete list of escape sequences
+     that are expanded before 'PS1' is displayed.
+
+'PS2'
+     The secondary prompt string.  The default value is '> '.  'PS2' is
+     expanded in the same way as 'PS1' before being displayed.
+
+
+File: bashref.info,  Node: Bash Variables,  Prev: Bourne Shell Variables,  Up: Shell Variables
+
+5.2 Bash Variables
+==================
+
+These variables are set or used by Bash, but other shells do not
+normally treat them specially.
+
+   A few variables used by Bash are described in different chapters:
+variables for controlling the job control facilities (*note Job Control
+Variables::).
+
+'_'
+     ($_, an underscore.)  At shell startup, set to the pathname used to
+     invoke the shell or shell script being executed as passed in the
+     environment or argument list.  Subsequently, expands to the last
+     argument to the previous simple command executed in the foreground,
+     after expansion.  Also set to the full pathname used to invoke each
+     command executed and placed in the environment exported to that
+     command.  When checking mail, this parameter holds the name of the
+     mail file.
+
+'BASH'
+     The full pathname used to execute the current instance of Bash.
+
+'BASHOPTS'
+     A colon-separated list of enabled shell options.  Each word in the
+     list is a valid argument for the '-s' option to the 'shopt' builtin
+     command (*note The Shopt Builtin::).  The options appearing in
+     'BASHOPTS' are those reported as 'on' by 'shopt'.  If this variable
+     is in the environment when Bash starts up, each shell option in the
+     list will be enabled before reading any startup files.  This
+     variable is readonly.
+
+'BASHPID'
+     Expands to the process ID of the current Bash process.  This
+     differs from '$$' under certain circumstances, such as subshells
+     that do not require Bash to be re-initialized.  Assignments to
+     'BASHPID' have no effect.  If 'BASHPID' is unset, it loses its
+     special properties, even if it is subsequently reset.
+
+'BASH_ALIASES'
+     An associative array variable whose members correspond to the
+     internal list of aliases as maintained by the 'alias' builtin.
+     (*note Bourne Shell Builtins::).  Elements added to this array
+     appear in the alias list; however, unsetting array elements
+     currently does not cause aliases to be removed from the alias list.
+     If 'BASH_ALIASES' is unset, it loses its special properties, even
+     if it is subsequently reset.
+
+'BASH_ARGC'
+     An array variable whose values are the number of parameters in each
+     frame of the current bash execution call stack.  The number of
+     parameters to the current subroutine (shell function or script
+     executed with '.' or 'source') is at the top of the stack.  When a
+     subroutine is executed, the number of parameters passed is pushed
+     onto 'BASH_ARGC'.  The shell sets 'BASH_ARGC' only when in extended
+     debugging mode (see *note The Shopt Builtin:: for a description of
+     the 'extdebug' option to the 'shopt' builtin).  Setting 'extdebug'
+     after the shell has started to execute a script, or referencing
+     this variable when 'extdebug' is not set, may result in
+     inconsistent values.
+
+'BASH_ARGV'
+     An array variable containing all of the parameters in the current
+     bash execution call stack.  The final parameter of the last
+     subroutine call is at the top of the stack; the first parameter of
+     the initial call is at the bottom.  When a subroutine is executed,
+     the parameters supplied are pushed onto 'BASH_ARGV'.  The shell
+     sets 'BASH_ARGV' only when in extended debugging mode (see *note
+     The Shopt Builtin:: for a description of the 'extdebug' option to
+     the 'shopt' builtin).  Setting 'extdebug' after the shell has
+     started to execute a script, or referencing this variable when
+     'extdebug' is not set, may result in inconsistent values.
+
+'BASH_ARGV0'
+     When referenced, this variable expands to the name of the shell or
+     shell script (identical to '$0'; *Note Special Parameters::, for
+     the description of special parameter 0).  Assignment to
+     'BASH_ARGV0' causes the value assigned to also be assigned to '$0'.
+     If 'BASH_ARGV0' is unset, it loses its special properties, even if
+     it is subsequently reset.
+
+'BASH_CMDS'
+     An associative array variable whose members correspond to the
+     internal hash table of commands as maintained by the 'hash' builtin
+     (*note Bourne Shell Builtins::).  Elements added to this array
+     appear in the hash table; however, unsetting array elements
+     currently does not cause command names to be removed from the hash
+     table.  If 'BASH_CMDS' is unset, it loses its special properties,
+     even if it is subsequently reset.
+
+'BASH_COMMAND'
+     The command currently being executed or about to be executed,
+     unless the shell is executing a command as the result of a trap, in
+     which case it is the command executing at the time of the trap.  If
+     'BASH_COMMAND' is unset, it loses its special properties, even if
+     it is subsequently reset.
+
+'BASH_COMPAT'
+     The value is used to set the shell's compatibility level.  *Note
+     Shell Compatibility Mode::, for a description of the various
+     compatibility levels and their effects.  The value may be a decimal
+     number (e.g., 4.2) or an integer (e.g., 42) corresponding to the
+     desired compatibility level.  If 'BASH_COMPAT' is unset or set to
+     the empty string, the compatibility level is set to the default for
+     the current version.  If 'BASH_COMPAT' is set to a value that is
+     not one of the valid compatibility levels, the shell prints an
+     error message and sets the compatibility level to the default for
+     the current version.  The valid values correspond to the
+     compatibility levels described below (*note Shell Compatibility
+     Mode::).  For example, 4.2 and 42 are valid values that correspond
+     to the 'compat42' 'shopt' option and set the compatibility level to
+     42.  The current version is also a valid value.
+
+'BASH_ENV'
+     If this variable is set when Bash is invoked to execute a shell
+     script, its value is expanded and used as the name of a startup
+     file to read before executing the script.  *Note Bash Startup
+     Files::.
+
+'BASH_EXECUTION_STRING'
+     The command argument to the '-c' invocation option.
+
+'BASH_LINENO'
+     An array variable whose members are the line numbers in source
+     files where each corresponding member of FUNCNAME was invoked.
+     '${BASH_LINENO[$i]}' is the line number in the source file
+     ('${BASH_SOURCE[$i+1]}') where '${FUNCNAME[$i]}' was called (or
+     '${BASH_LINENO[$i-1]}' if referenced within another shell
+     function).  Use 'LINENO' to obtain the current line number.
+
+'BASH_LOADABLES_PATH'
+     A colon-separated list of directories in which the shell looks for
+     dynamically loadable builtins specified by the 'enable' command.
+
+'BASH_REMATCH'
+     An array variable whose members are assigned by the '=~' binary
+     operator to the '[[' conditional command (*note Conditional
+     Constructs::).  The element with index 0 is the portion of the
+     string matching the entire regular expression.  The element with
+     index N is the portion of the string matching the Nth parenthesized
+     subexpression.
+
+'BASH_SOURCE'
+     An array variable whose members are the source filenames where the
+     corresponding shell function names in the 'FUNCNAME' array variable
+     are defined.  The shell function '${FUNCNAME[$i]}' is defined in
+     the file '${BASH_SOURCE[$i]}' and called from
+     '${BASH_SOURCE[$i+1]}'
+
+'BASH_SUBSHELL'
+     Incremented by one within each subshell or subshell environment
+     when the shell begins executing in that environment.  The initial
+     value is 0.  If 'BASH_SUBSHELL' is unset, it loses its special
+     properties, even if it is subsequently reset.
+
+'BASH_VERSINFO'
+     A readonly array variable (*note Arrays::) whose members hold
+     version information for this instance of Bash.  The values assigned
+     to the array members are as follows:
+
+     'BASH_VERSINFO[0]'
+          The major version number (the RELEASE).
+
+     'BASH_VERSINFO[1]'
+          The minor version number (the VERSION).
+
+     'BASH_VERSINFO[2]'
+          The patch level.
+
+     'BASH_VERSINFO[3]'
+          The build version.
+
+     'BASH_VERSINFO[4]'
+          The release status (e.g., BETA1).
+
+     'BASH_VERSINFO[5]'
+          The value of 'MACHTYPE'.
+
+'BASH_VERSION'
+     The version number of the current instance of Bash.
+
+'BASH_XTRACEFD'
+     If set to an integer corresponding to a valid file descriptor, Bash
+     will write the trace output generated when 'set -x' is enabled to
+     that file descriptor.  This allows tracing output to be separated
+     from diagnostic and error messages.  The file descriptor is closed
+     when 'BASH_XTRACEFD' is unset or assigned a new value.  Unsetting
+     'BASH_XTRACEFD' or assigning it the empty string causes the trace
+     output to be sent to the standard error.  Note that setting
+     'BASH_XTRACEFD' to 2 (the standard error file descriptor) and then
+     unsetting it will result in the standard error being closed.
+
+'CHILD_MAX'
+     Set the number of exited child status values for the shell to
+     remember.  Bash will not allow this value to be decreased below a
+     POSIX-mandated minimum, and there is a maximum value (currently
+     8192) that this may not exceed.  The minimum value is
+     system-dependent.
+
+'COLUMNS'
+     Used by the 'select' command to determine the terminal width when
+     printing selection lists.  Automatically set if the 'checkwinsize'
+     option is enabled (*note The Shopt Builtin::), or in an interactive
+     shell upon receipt of a 'SIGWINCH'.
+
+'COMP_CWORD'
+     An index into '${COMP_WORDS}' of the word containing the current
+     cursor position.  This variable is available only in shell
+     functions invoked by the programmable completion facilities (*note
+     Programmable Completion::).
+
+'COMP_LINE'
+     The current command line.  This variable is available only in shell
+     functions and external commands invoked by the programmable
+     completion facilities (*note Programmable Completion::).
+
+'COMP_POINT'
+     The index of the current cursor position relative to the beginning
+     of the current command.  If the current cursor position is at the
+     end of the current command, the value of this variable is equal to
+     '${#COMP_LINE}'.  This variable is available only in shell
+     functions and external commands invoked by the programmable
+     completion facilities (*note Programmable Completion::).
+
+'COMP_TYPE'
+     Set to an integer value corresponding to the type of completion
+     attempted that caused a completion function to be called: TAB, for
+     normal completion, '?', for listing completions after successive
+     tabs, '!', for listing alternatives on partial word completion,
+     '@', to list completions if the word is not unmodified, or '%', for
+     menu completion.  This variable is available only in shell
+     functions and external commands invoked by the programmable
+     completion facilities (*note Programmable Completion::).
+
+'COMP_KEY'
+     The key (or final key of a key sequence) used to invoke the current
+     completion function.
+
+'COMP_WORDBREAKS'
+     The set of characters that the Readline library treats as word
+     separators when performing word completion.  If 'COMP_WORDBREAKS'
+     is unset, it loses its special properties, even if it is
+     subsequently reset.
+
+'COMP_WORDS'
+     An array variable consisting of the individual words in the current
+     command line.  The line is split into words as Readline would split
+     it, using 'COMP_WORDBREAKS' as described above.  This variable is
+     available only in shell functions invoked by the programmable
+     completion facilities (*note Programmable Completion::).
+
+'COMPREPLY'
+     An array variable from which Bash reads the possible completions
+     generated by a shell function invoked by the programmable
+     completion facility (*note Programmable Completion::).  Each array
+     element contains one possible completion.
+
+'COPROC'
+     An array variable created to hold the file descriptors for output
+     from and input to an unnamed coprocess (*note Coprocesses::).
+
+'DIRSTACK'
+     An array variable containing the current contents of the directory
+     stack.  Directories appear in the stack in the order they are
+     displayed by the 'dirs' builtin.  Assigning to members of this
+     array variable may be used to modify directories already in the
+     stack, but the 'pushd' and 'popd' builtins must be used to add and
+     remove directories.  Assignment to this variable will not change
+     the current directory.  If 'DIRSTACK' is unset, it loses its
+     special properties, even if it is subsequently reset.
+
+'EMACS'
+     If Bash finds this variable in the environment when the shell
+     starts with value 't', it assumes that the shell is running in an
+     Emacs shell buffer and disables line editing.
+
+'ENV'
+     Expanded and executed similarlty to 'BASH_ENV' (*note Bash Startup
+     Files::) when an interactive shell is invoked in POSIX Mode (*note
+     Bash POSIX Mode::).
+
+'EPOCHREALTIME'
+     Each time this parameter is referenced, it expands to the number of
+     seconds since the Unix Epoch as a floating point value with
+     micro-second granularity (see the documentation for the C library
+     function TIME for the definition of Epoch).  Assignments to
+     'EPOCHREALTIME' are ignored.  If 'EPOCHREALTIME' is unset, it loses
+     its special properties, even if it is subsequently reset.
+
+'EPOCHSECONDS'
+     Each time this parameter is referenced, it expands to the number of
+     seconds since the Unix Epoch (see the documentation for the C
+     library function TIME for the definition of Epoch).  Assignments to
+     'EPOCHSECONDS' are ignored.  If 'EPOCHSECONDS' is unset, it loses
+     its special properties, even if it is subsequently reset.
+
+'EUID'
+     The numeric effective user id of the current user.  This variable
+     is readonly.
+
+'EXECIGNORE'
+     A colon-separated list of shell patterns (*note Pattern Matching::)
+     defining the list of filenames to be ignored by command search
+     using 'PATH'.  Files whose full pathnames match one of these
+     patterns are not considered executable files for the purposes of
+     completion and command execution via 'PATH' lookup.  This does not
+     affect the behavior of the '[', 'test', and '[[' commands.  Full
+     pathnames in the command hash table are not subject to
+     'EXECIGNORE'.  Use this variable to ignore shared library files
+     that have the executable bit set, but are not executable files.
+     The pattern matching honors the setting of the 'extglob' shell
+     option.
+
+'FCEDIT'
+     The editor used as a default by the '-e' option to the 'fc' builtin
+     command.
+
+'FIGNORE'
+     A colon-separated list of suffixes to ignore when performing
+     filename completion.  A filename whose suffix matches one of the
+     entries in 'FIGNORE' is excluded from the list of matched
+     filenames.  A sample value is '.o:~'
+
+'FUNCNAME'
+     An array variable containing the names of all shell functions
+     currently in the execution call stack.  The element with index 0 is
+     the name of any currently-executing shell function.  The
+     bottom-most element (the one with the highest index) is '"main"'.
+     This variable exists only when a shell function is executing.
+     Assignments to 'FUNCNAME' have no effect.  If 'FUNCNAME' is unset,
+     it loses its special properties, even if it is subsequently reset.
+
+     This variable can be used with 'BASH_LINENO' and 'BASH_SOURCE'.
+     Each element of 'FUNCNAME' has corresponding elements in
+     'BASH_LINENO' and 'BASH_SOURCE' to describe the call stack.  For
+     instance, '${FUNCNAME[$i]}' was called from the file
+     '${BASH_SOURCE[$i+1]}' at line number '${BASH_LINENO[$i]}'.  The
+     'caller' builtin displays the current call stack using this
+     information.
+
+'FUNCNEST'
+     If set to a numeric value greater than 0, defines a maximum
+     function nesting level.  Function invocations that exceed this
+     nesting level will cause the current command to abort.
+
+'GLOBIGNORE'
+     A colon-separated list of patterns defining the set of file names
+     to be ignored by filename expansion.  If a file name matched by a
+     filename expansion pattern also matches one of the patterns in
+     'GLOBIGNORE', it is removed from the list of matches.  The pattern
+     matching honors the setting of the 'extglob' shell option.
+
+'GROUPS'
+     An array variable containing the list of groups of which the
+     current user is a member.  Assignments to 'GROUPS' have no effect.
+     If 'GROUPS' is unset, it loses its special properties, even if it
+     is subsequently reset.
+
+'histchars'
+     Up to three characters which control history expansion, quick
+     substitution, and tokenization (*note History Interaction::).  The
+     first character is the HISTORY EXPANSION character, that is, the
+     character which signifies the start of a history expansion,
+     normally '!'.  The second character is the character which
+     signifies 'quick substitution' when seen as the first character on
+     a line, normally '^'.  The optional third character is the
+     character which indicates that the remainder of the line is a
+     comment when found as the first character of a word, usually '#'.
+     The history comment character causes history substitution to be
+     skipped for the remaining words on the line.  It does not
+     necessarily cause the shell parser to treat the rest of the line as
+     a comment.
+
+'HISTCMD'
+     The history number, or index in the history list, of the current
+     command.  Assignments to 'HISTCMD' are ignored.  If 'HISTCMD' is
+     unset, it loses its special properties, even if it is subsequently
+     reset.
+
+'HISTCONTROL'
+     A colon-separated list of values controlling how commands are saved
+     on the history list.  If the list of values includes 'ignorespace',
+     lines which begin with a space character are not saved in the
+     history list.  A value of 'ignoredups' causes lines which match the
+     previous history entry to not be saved.  A value of 'ignoreboth' is
+     shorthand for 'ignorespace' and 'ignoredups'.  A value of
+     'erasedups' causes all previous lines matching the current line to
+     be removed from the history list before that line is saved.  Any
+     value not in the above list is ignored.  If 'HISTCONTROL' is unset,
+     or does not include a valid value, all lines read by the shell
+     parser are saved on the history list, subject to the value of
+     'HISTIGNORE'.  The second and subsequent lines of a multi-line
+     compound command are not tested, and are added to the history
+     regardless of the value of 'HISTCONTROL'.
+
+'HISTFILE'
+     The name of the file to which the command history is saved.  The
+     default value is '~/.bash_history'.
+
+'HISTFILESIZE'
+     The maximum number of lines contained in the history file.  When
+     this variable is assigned a value, the history file is truncated,
+     if necessary, to contain no more than that number of lines by
+     removing the oldest entries.  The history file is also truncated to
+     this size after writing it when a shell exits.  If the value is 0,
+     the history file is truncated to zero size.  Non-numeric values and
+     numeric values less than zero inhibit truncation.  The shell sets
+     the default value to the value of 'HISTSIZE' after reading any
+     startup files.
+
+'HISTIGNORE'
+     A colon-separated list of patterns used to decide which command
+     lines should be saved on the history list.  Each pattern is
+     anchored at the beginning of the line and must match the complete
+     line (no implicit '*' is appended).  Each pattern is tested against
+     the line after the checks specified by 'HISTCONTROL' are applied.
+     In addition to the normal shell pattern matching characters, '&'
+     matches the previous history line.  '&' may be escaped using a
+     backslash; the backslash is removed before attempting a match.  The
+     second and subsequent lines of a multi-line compound command are
+     not tested, and are added to the history regardless of the value of
+     'HISTIGNORE'.  The pattern matching honors the setting of the
+     'extglob' shell option.
+
+     'HISTIGNORE' subsumes the function of 'HISTCONTROL'.  A pattern of
+     '&' is identical to 'ignoredups', and a pattern of '[ ]*' is
+     identical to 'ignorespace'.  Combining these two patterns,
+     separating them with a colon, provides the functionality of
+     'ignoreboth'.
+
+'HISTSIZE'
+     The maximum number of commands to remember on the history list.  If
+     the value is 0, commands are not saved in the history list.
+     Numeric values less than zero result in every command being saved
+     on the history list (there is no limit).  The shell sets the
+     default value to 500 after reading any startup files.
+
+'HISTTIMEFORMAT'
+     If this variable is set and not null, its value is used as a format
+     string for STRFTIME to print the time stamp associated with each
+     history entry displayed by the 'history' builtin.  If this variable
+     is set, time stamps are written to the history file so they may be
+     preserved across shell sessions.  This uses the history comment
+     character to distinguish timestamps from other history lines.
+
+'HOSTFILE'
+     Contains the name of a file in the same format as '/etc/hosts' that
+     should be read when the shell needs to complete a hostname.  The
+     list of possible hostname completions may be changed while the
+     shell is running; the next time hostname completion is attempted
+     after the value is changed, Bash adds the contents of the new file
+     to the existing list.  If 'HOSTFILE' is set, but has no value, or
+     does not name a readable file, Bash attempts to read '/etc/hosts'
+     to obtain the list of possible hostname completions.  When
+     'HOSTFILE' is unset, the hostname list is cleared.
+
+'HOSTNAME'
+     The name of the current host.
+
+'HOSTTYPE'
+     A string describing the machine Bash is running on.
+
+'IGNOREEOF'
+     Controls the action of the shell on receipt of an 'EOF' character
+     as the sole input.  If set, the value denotes the number of
+     consecutive 'EOF' characters that can be read as the first
+     character on an input line before the shell will exit.  If the
+     variable exists but does not have a numeric value, or has no value,
+     then the default is 10.  If the variable does not exist, then 'EOF'
+     signifies the end of input to the shell.  This is only in effect
+     for interactive shells.
+
+'INPUTRC'
+     The name of the Readline initialization file, overriding the
+     default of '~/.inputrc'.
+
+'INSIDE_EMACS'
+     If Bash finds this variable in the environment when the shell
+     starts, it assumes that the shell is running in an Emacs shell
+     buffer and may disable line editing depending on the value of
+     'TERM'.
+
+'LANG'
+     Used to determine the locale category for any category not
+     specifically selected with a variable starting with 'LC_'.
+
+'LC_ALL'
+     This variable overrides the value of 'LANG' and any other 'LC_'
+     variable specifying a locale category.
+
+'LC_COLLATE'
+     This variable determines the collation order used when sorting the
+     results of filename expansion, and determines the behavior of range
+     expressions, equivalence classes, and collating sequences within
+     filename expansion and pattern matching (*note Filename
+     Expansion::).
+
+'LC_CTYPE'
+     This variable determines the interpretation of characters and the
+     behavior of character classes within filename expansion and pattern
+     matching (*note Filename Expansion::).
+
+'LC_MESSAGES'
+     This variable determines the locale used to translate double-quoted
+     strings preceded by a '$' (*note Locale Translation::).
+
+'LC_NUMERIC'
+     This variable determines the locale category used for number
+     formatting.
+
+'LC_TIME'
+     This variable determines the locale category used for data and time
+     formatting.
+
+'LINENO'
+     The line number in the script or shell function currently
+     executing.  If 'LINENO' is unset, it loses its special properties,
+     even if it is subsequently reset.
+
+'LINES'
+     Used by the 'select' command to determine the column length for
+     printing selection lists.  Automatically set if the 'checkwinsize'
+     option is enabled (*note The Shopt Builtin::), or in an interactive
+     shell upon receipt of a 'SIGWINCH'.
+
+'MACHTYPE'
+     A string that fully describes the system type on which Bash is
+     executing, in the standard GNU CPU-COMPANY-SYSTEM format.
+
+'MAILCHECK'
+     How often (in seconds) that the shell should check for mail in the
+     files specified in the 'MAILPATH' or 'MAIL' variables.  The default
+     is 60 seconds.  When it is time to check for mail, the shell does
+     so before displaying the primary prompt.  If this variable is
+     unset, or set to a value that is not a number greater than or equal
+     to zero, the shell disables mail checking.
+
+'MAPFILE'
+     An array variable created to hold the text read by the 'mapfile'
+     builtin when no variable name is supplied.
+
+'OLDPWD'
+     The previous working directory as set by the 'cd' builtin.
+
+'OPTERR'
+     If set to the value 1, Bash displays error messages generated by
+     the 'getopts' builtin command.
+
+'OSTYPE'
+     A string describing the operating system Bash is running on.
+
+'PIPESTATUS'
+     An array variable (*note Arrays::) containing a list of exit status
+     values from the processes in the most-recently-executed foreground
+     pipeline (which may contain only a single command).
+
+'POSIXLY_CORRECT'
+     If this variable is in the environment when Bash starts, the shell
+     enters POSIX mode (*note Bash POSIX Mode::) before reading the
+     startup files, as if the '--posix' invocation option had been
+     supplied.  If it is set while the shell is running, Bash enables
+     POSIX mode, as if the command
+          set -o posix
+     had been executed.  When the shell enters POSIX mode, it sets this
+     variable if it was not already set.
+
+'PPID'
+     The process ID of the shell's parent process.  This variable is
+     readonly.
+
+'PROMPT_COMMAND'
+     If this variable is set, and is an array, the value of each set
+     element is interpreted as a command to execute before printing the
+     primary prompt ('$PS1').  If this is set but not an array variable,
+     its value is used as a command to execute instead.
+
+'PROMPT_DIRTRIM'
+     If set to a number greater than zero, the value is used as the
+     number of trailing directory components to retain when expanding
+     the '\w' and '\W' prompt string escapes (*note Controlling the
+     Prompt::).  Characters removed are replaced with an ellipsis.
+
+'PS0'
+     The value of this parameter is expanded like 'PS1' and displayed by
+     interactive shells after reading a command and before the command
+     is executed.
+
+'PS3'
+     The value of this variable is used as the prompt for the 'select'
+     command.  If this variable is not set, the 'select' command prompts
+     with '#? '
+
+'PS4'
+     The value of this parameter is expanded like PS1 and the expanded
+     value is the prompt printed before the command line is echoed when
+     the '-x' option is set (*note The Set Builtin::).  The first
+     character of the expanded value is replicated multiple times, as
+     necessary, to indicate multiple levels of indirection.  The default
+     is '+ '.
+
+'PWD'
+     The current working directory as set by the 'cd' builtin.
+
+'RANDOM'
+     Each time this parameter is referenced, it expands to a random
+     integer between 0 and 32767.  Assigning a value to this variable
+     seeds the random number generator.  If 'RANDOM' is unset, it loses
+     its special properties, even if it is subsequently reset.
+
+'READLINE_LINE'
+     The contents of the Readline line buffer, for use with 'bind -x'
+     (*note Bash Builtins::).
+
+'READLINE_MARK'
+     The position of the MARK (saved insertion point) in the Readline
+     line buffer, for use with 'bind -x' (*note Bash Builtins::).  The
+     characters between the insertion point and the mark are often
+     called the REGION.
+
+'READLINE_POINT'
+     The position of the insertion point in the Readline line buffer,
+     for use with 'bind -x' (*note Bash Builtins::).
+
+'REPLY'
+     The default variable for the 'read' builtin.
+
+'SECONDS'
+     This variable expands to the number of seconds since the shell was
+     started.  Assignment to this variable resets the count to the value
+     assigned, and the expanded value becomes the value assigned plus
+     the number of seconds since the assignment.  The number of seconds
+     at shell invocation and the current time is always determined by
+     querying the system clock.  If 'SECONDS' is unset, it loses its
+     special properties, even if it is subsequently reset.
+
+'SHELL'
+     This environment variable expands to the full pathname to the
+     shell.  If it is not set when the shell starts, Bash assigns to it
+     the full pathname of the current user's login shell.
+
+'SHELLOPTS'
+     A colon-separated list of enabled shell options.  Each word in the
+     list is a valid argument for the '-o' option to the 'set' builtin
+     command (*note The Set Builtin::).  The options appearing in
+     'SHELLOPTS' are those reported as 'on' by 'set -o'.  If this
+     variable is in the environment when Bash starts up, each shell
+     option in the list will be enabled before reading any startup
+     files.  This variable is readonly.
+
+'SHLVL'
+     Incremented by one each time a new instance of Bash is started.
+     This is intended to be a count of how deeply your Bash shells are
+     nested.
+
+'SRANDOM'
+     This variable expands to a 32-bit pseudo-random number each time it
+     is referenced.  The random number generator is not linear on
+     systems that support '/dev/urandom' or 'arc4random', so each
+     returned number has no relationship to the numbers preceding it.
+     The random number generator cannot be seeded, so assignments to
+     this variable have no effect.  If 'SRANDOM' is unset, it loses its
+     special properties, even if it is subsequently reset.
+
+'TIMEFORMAT'
+     The value of this parameter is used as a format string specifying
+     how the timing information for pipelines prefixed with the 'time'
+     reserved word should be displayed.  The '%' character introduces an
+     escape sequence that is expanded to a time value or other
+     information.  The escape sequences and their meanings are as
+     follows; the braces denote optional portions.
+
+     '%%'
+          A literal '%'.
+
+     '%[P][l]R'
+          The elapsed time in seconds.
+
+     '%[P][l]U'
+          The number of CPU seconds spent in user mode.
+
+     '%[P][l]S'
+          The number of CPU seconds spent in system mode.
+
+     '%P'
+          The CPU percentage, computed as (%U + %S) / %R.
+
+     The optional P is a digit specifying the precision, the number of
+     fractional digits after a decimal point.  A value of 0 causes no
+     decimal point or fraction to be output.  At most three places after
+     the decimal point may be specified; values of P greater than 3 are
+     changed to 3.  If P is not specified, the value 3 is used.
+
+     The optional 'l' specifies a longer format, including minutes, of
+     the form MMmSS.FFs.  The value of P determines whether or not the
+     fraction is included.
+
+     If this variable is not set, Bash acts as if it had the value
+          $'\nreal\t%3lR\nuser\t%3lU\nsys\t%3lS'
+     If the value is null, no timing information is displayed.  A
+     trailing newline is added when the format string is displayed.
+
+'TMOUT'
+     If set to a value greater than zero, 'TMOUT' is treated as the
+     default timeout for the 'read' builtin (*note Bash Builtins::).
+     The 'select' command (*note Conditional Constructs::) terminates if
+     input does not arrive after 'TMOUT' seconds when input is coming
+     from a terminal.
+
+     In an interactive shell, the value is interpreted as the number of
+     seconds to wait for a line of input after issuing the primary
+     prompt.  Bash terminates after waiting for that number of seconds
+     if a complete line of input does not arrive.
+
+'TMPDIR'
+     If set, Bash uses its value as the name of a directory in which
+     Bash creates temporary files for the shell's use.
+
+'UID'
+     The numeric real user id of the current user.  This variable is
+     readonly.
+
+
+File: bashref.info,  Node: Bash Features,  Next: Job Control,  Prev: Shell Variables,  Up: Top
+
+6 Bash Features
+***************
+
+This chapter describes features unique to Bash.
+
+* Menu:
+
+* Invoking Bash::		Command line options that you can give
+				to Bash.
+* Bash Startup Files::		When and how Bash executes scripts.
+* Interactive Shells::		What an interactive shell is.
+* Bash Conditional Expressions::	Primitives used in composing expressions for
+				the 'test' builtin.
+* Shell Arithmetic::		Arithmetic on shell variables.
+* Aliases::			Substituting one command for another.
+* Arrays::			Array Variables.
+* The Directory Stack::		History of visited directories.
+* Controlling the Prompt::	Customizing the various prompt strings.
+* The Restricted Shell::	A more controlled mode of shell execution.
+* Bash POSIX Mode::		Making Bash behave more closely to what
+				the POSIX standard specifies.
+* Shell Compatibility Mode::	How Bash supports behavior that was present
+				in earlier versions and has changed.
+
+
+File: bashref.info,  Node: Invoking Bash,  Next: Bash Startup Files,  Up: Bash Features
+
+6.1 Invoking Bash
+=================
+
+     bash [long-opt] [-ir] [-abefhkmnptuvxdBCDHP] [-o OPTION]
+         [-O SHOPT_OPTION] [ARGUMENT ...]
+     bash [long-opt] [-abefhkmnptuvxdBCDHP] [-o OPTION]
+         [-O SHOPT_OPTION] -c STRING [ARGUMENT ...]
+     bash [long-opt] -s [-abefhkmnptuvxdBCDHP] [-o OPTION]
+         [-O SHOPT_OPTION] [ARGUMENT ...]
+
+   All of the single-character options used with the 'set' builtin
+(*note The Set Builtin::) can be used as options when the shell is
+invoked.  In addition, there are several multi-character options that
+you can use.  These options must appear on the command line before the
+single-character options to be recognized.
+
+'--debugger'
+     Arrange for the debugger profile to be executed before the shell
+     starts.  Turns on extended debugging mode (see *note The Shopt
+     Builtin:: for a description of the 'extdebug' option to the 'shopt'
+     builtin).
+
+'--dump-po-strings'
+     A list of all double-quoted strings preceded by '$' is printed on
+     the standard output in the GNU 'gettext' PO (portable object) file
+     format.  Equivalent to '-D' except for the output format.
+
+'--dump-strings'
+     Equivalent to '-D'.
+
+'--help'
+     Display a usage message on standard output and exit successfully.
+
+'--init-file FILENAME'
+'--rcfile FILENAME'
+     Execute commands from FILENAME (instead of '~/.bashrc') in an
+     interactive shell.
+
+'--login'
+     Equivalent to '-l'.
+
+'--noediting'
+     Do not use the GNU Readline library (*note Command Line Editing::)
+     to read command lines when the shell is interactive.
+
+'--noprofile'
+     Don't load the system-wide startup file '/etc/profile' or any of
+     the personal initialization files '~/.bash_profile',
+     '~/.bash_login', or '~/.profile' when Bash is invoked as a login
+     shell.
+
+'--norc'
+     Don't read the '~/.bashrc' initialization file in an interactive
+     shell.  This is on by default if the shell is invoked as 'sh'.
+
+'--posix'
+     Change the behavior of Bash where the default operation differs
+     from the POSIX standard to match the standard.  This is intended to
+     make Bash behave as a strict superset of that standard.  *Note Bash
+     POSIX Mode::, for a description of the Bash POSIX mode.
+
+'--restricted'
+     Make the shell a restricted shell (*note The Restricted Shell::).
+
+'--verbose'
+     Equivalent to '-v'.  Print shell input lines as they're read.
+
+'--version'
+     Show version information for this instance of Bash on the standard
+     output and exit successfully.
+
+   There are several single-character options that may be supplied at
+invocation which are not available with the 'set' builtin.
+
+'-c'
+     Read and execute commands from the first non-option argument
+     COMMAND_STRING, then exit.  If there are arguments after the
+     COMMAND_STRING, the first argument is assigned to '$0' and any
+     remaining arguments are assigned to the positional parameters.  The
+     assignment to '$0' sets the name of the shell, which is used in
+     warning and error messages.
+
+'-i'
+     Force the shell to run interactively.  Interactive shells are
+     described in *note Interactive Shells::.
+
+'-l'
+     Make this shell act as if it had been directly invoked by login.
+     When the shell is interactive, this is equivalent to starting a
+     login shell with 'exec -l bash'.  When the shell is not
+     interactive, the login shell startup files will be executed.  'exec
+     bash -l' or 'exec bash --login' will replace the current shell with
+     a Bash login shell.  *Note Bash Startup Files::, for a description
+     of the special behavior of a login shell.
+
+'-r'
+     Make the shell a restricted shell (*note The Restricted Shell::).
+
+'-s'
+     If this option is present, or if no arguments remain after option
+     processing, then commands are read from the standard input.  This
+     option allows the positional parameters to be set when invoking an
+     interactive shell or when reading input through a pipe.
+
+'-D'
+     A list of all double-quoted strings preceded by '$' is printed on
+     the standard output.  These are the strings that are subject to
+     language translation when the current locale is not 'C' or 'POSIX'
+     (*note Locale Translation::).  This implies the '-n' option; no
+     commands will be executed.
+
+'[-+]O [SHOPT_OPTION]'
+     SHOPT_OPTION is one of the shell options accepted by the 'shopt'
+     builtin (*note The Shopt Builtin::).  If SHOPT_OPTION is present,
+     '-O' sets the value of that option; '+O' unsets it.  If
+     SHOPT_OPTION is not supplied, the names and values of the shell
+     options accepted by 'shopt' are printed on the standard output.  If
+     the invocation option is '+O', the output is displayed in a format
+     that may be reused as input.
+
+'--'
+     A '--' signals the end of options and disables further option
+     processing.  Any arguments after the '--' are treated as filenames
+     and arguments.
+
+   A _login_ shell is one whose first character of argument zero is '-',
+or one invoked with the '--login' option.
+
+   An _interactive_ shell is one started without non-option arguments,
+unless '-s' is specified, without specifying the '-c' option, and whose
+input and output are both connected to terminals (as determined by
+'isatty(3)'), or one started with the '-i' option.  *Note Interactive
+Shells::, for more information.
+
+   If arguments remain after option processing, and neither the '-c' nor
+the '-s' option has been supplied, the first argument is assumed to be
+the name of a file containing shell commands (*note Shell Scripts::).
+When Bash is invoked in this fashion, '$0' is set to the name of the
+file, and the positional parameters are set to the remaining arguments.
+Bash reads and executes commands from this file, then exits.  Bash's
+exit status is the exit status of the last command executed in the
+script.  If no commands are executed, the exit status is 0.
+
+
+File: bashref.info,  Node: Bash Startup Files,  Next: Interactive Shells,  Prev: Invoking Bash,  Up: Bash Features
+
+6.2 Bash Startup Files
+======================
+
+This section describes how Bash executes its startup files.  If any of
+the files exist but cannot be read, Bash reports an error.  Tildes are
+expanded in filenames as described above under Tilde Expansion (*note
+Tilde Expansion::).
+
+   Interactive shells are described in *note Interactive Shells::.
+
+Invoked as an interactive login shell, or with '--login'
+........................................................
+
+When Bash is invoked as an interactive login shell, or as a
+non-interactive shell with the '--login' option, it first reads and
+executes commands from the file '/etc/profile', if that file exists.
+After reading that file, it looks for '~/.bash_profile',
+'~/.bash_login', and '~/.profile', in that order, and reads and executes
+commands from the first one that exists and is readable.  The
+'--noprofile' option may be used when the shell is started to inhibit
+this behavior.
+
+   When an interactive login shell exits, or a non-interactive login
+shell executes the 'exit' builtin command, Bash reads and executes
+commands from the file '~/.bash_logout', if it exists.
+
+Invoked as an interactive non-login shell
+.........................................
+
+When an interactive shell that is not a login shell is started, Bash
+reads and executes commands from '~/.bashrc', if that file exists.  This
+may be inhibited by using the '--norc' option.  The '--rcfile FILE'
+option will force Bash to read and execute commands from FILE instead of
+'~/.bashrc'.
+
+   So, typically, your '~/.bash_profile' contains the line
+     if [ -f ~/.bashrc ]; then . ~/.bashrc; fi
+after (or before) any login-specific initializations.
+
+Invoked non-interactively
+.........................
+
+When Bash is started non-interactively, to run a shell script, for
+example, it looks for the variable 'BASH_ENV' in the environment,
+expands its value if it appears there, and uses the expanded value as
+the name of a file to read and execute.  Bash behaves as if the
+following command were executed:
+     if [ -n "$BASH_ENV" ]; then . "$BASH_ENV"; fi
+but the value of the 'PATH' variable is not used to search for the
+filename.
+
+   As noted above, if a non-interactive shell is invoked with the
+'--login' option, Bash attempts to read and execute commands from the
+login shell startup files.
+
+Invoked with name 'sh'
+......................
+
+If Bash is invoked with the name 'sh', it tries to mimic the startup
+behavior of historical versions of 'sh' as closely as possible, while
+conforming to the POSIX standard as well.
+
+   When invoked as an interactive login shell, or as a non-interactive
+shell with the '--login' option, it first attempts to read and execute
+commands from '/etc/profile' and '~/.profile', in that order.  The
+'--noprofile' option may be used to inhibit this behavior.  When invoked
+as an interactive shell with the name 'sh', Bash looks for the variable
+'ENV', expands its value if it is defined, and uses the expanded value
+as the name of a file to read and execute.  Since a shell invoked as
+'sh' does not attempt to read and execute commands from any other
+startup files, the '--rcfile' option has no effect.  A non-interactive
+shell invoked with the name 'sh' does not attempt to read any other
+startup files.
+
+   When invoked as 'sh', Bash enters POSIX mode after the startup files
+are read.
+
+Invoked in POSIX mode
+.....................
+
+When Bash is started in POSIX mode, as with the '--posix' command line
+option, it follows the POSIX standard for startup files.  In this mode,
+interactive shells expand the 'ENV' variable and commands are read and
+executed from the file whose name is the expanded value.  No other
+startup files are read.
+
+Invoked by remote shell daemon
+..............................
+
+Bash attempts to determine when it is being run with its standard input
+connected to a network connection, as when executed by the remote shell
+daemon, usually 'rshd', or the secure shell daemon 'sshd'.  If Bash
+determines it is being run in this fashion, it reads and executes
+commands from '~/.bashrc', if that file exists and is readable.  It will
+not do this if invoked as 'sh'.  The '--norc' option may be used to
+inhibit this behavior, and the '--rcfile' option may be used to force
+another file to be read, but neither 'rshd' nor 'sshd' generally invoke
+the shell with those options or allow them to be specified.
+
+Invoked with unequal effective and real UID/GIDs
+................................................
+
+If Bash is started with the effective user (group) id not equal to the
+real user (group) id, and the '-p' option is not supplied, no startup
+files are read, shell functions are not inherited from the environment,
+the 'SHELLOPTS', 'BASHOPTS', 'CDPATH', and 'GLOBIGNORE' variables, if
+they appear in the environment, are ignored, and the effective user id
+is set to the real user id.  If the '-p' option is supplied at
+invocation, the startup behavior is the same, but the effective user id
+is not reset.
+
+
+File: bashref.info,  Node: Interactive Shells,  Next: Bash Conditional Expressions,  Prev: Bash Startup Files,  Up: Bash Features
+
+6.3 Interactive Shells
+======================
+
+* Menu:
+
+* What is an Interactive Shell?::	What determines whether a shell is Interactive.
+* Is this Shell Interactive?::	How to tell if a shell is interactive.
+* Interactive Shell Behavior::	What changes in a interactive shell?
+
+
+File: bashref.info,  Node: What is an Interactive Shell?,  Next: Is this Shell Interactive?,  Up: Interactive Shells
+
+6.3.1 What is an Interactive Shell?
+-----------------------------------
+
+An interactive shell is one started without non-option arguments, unless
+'-s' is specified, without specifying the '-c' option, and whose input
+and error output are both connected to terminals (as determined by
+'isatty(3)'), or one started with the '-i' option.
+
+   An interactive shell generally reads from and writes to a user's
+terminal.
+
+   The '-s' invocation option may be used to set the positional
+parameters when an interactive shell is started.
+
+
+File: bashref.info,  Node: Is this Shell Interactive?,  Next: Interactive Shell Behavior,  Prev: What is an Interactive Shell?,  Up: Interactive Shells
+
+6.3.2 Is this Shell Interactive?
+--------------------------------
+
+To determine within a startup script whether or not Bash is running
+interactively, test the value of the '-' special parameter.  It contains
+'i' when the shell is interactive.  For example:
+
+     case "$-" in
+     *i*)	echo This shell is interactive ;;
+     *)	echo This shell is not interactive ;;
+     esac
+
+   Alternatively, startup scripts may examine the variable 'PS1'; it is
+unset in non-interactive shells, and set in interactive shells.  Thus:
+
+     if [ -z "$PS1" ]; then
+             echo This shell is not interactive
+     else
+             echo This shell is interactive
+     fi
+
+
+File: bashref.info,  Node: Interactive Shell Behavior,  Prev: Is this Shell Interactive?,  Up: Interactive Shells
+
+6.3.3 Interactive Shell Behavior
+--------------------------------
+
+When the shell is running interactively, it changes its behavior in
+several ways.
+
+  1. Startup files are read and executed as described in *note Bash
+     Startup Files::.
+
+  2. Job Control (*note Job Control::) is enabled by default.  When job
+     control is in effect, Bash ignores the keyboard-generated job
+     control signals 'SIGTTIN', 'SIGTTOU', and 'SIGTSTP'.
+
+  3. Bash expands and displays 'PS1' before reading the first line of a
+     command, and expands and displays 'PS2' before reading the second
+     and subsequent lines of a multi-line command.  Bash expands and
+     displays 'PS0' after it reads a command but before executing it.
+     See *note Controlling the Prompt::, for a complete list of prompt
+     string escape sequences.
+
+  4. Bash executes the values of the set elements of the
+     'PROMPT_COMMANDS' array variable as commands before printing the
+     primary prompt, '$PS1' (*note Bash Variables::).
+
+  5. Readline (*note Command Line Editing::) is used to read commands
+     from the user's terminal.
+
+  6. Bash inspects the value of the 'ignoreeof' option to 'set -o'
+     instead of exiting immediately when it receives an 'EOF' on its
+     standard input when reading a command (*note The Set Builtin::).
+
+  7. Command history (*note Bash History Facilities::) and history
+     expansion (*note History Interaction::) are enabled by default.
+     Bash will save the command history to the file named by '$HISTFILE'
+     when a shell with history enabled exits.
+
+  8. Alias expansion (*note Aliases::) is performed by default.
+
+  9. In the absence of any traps, Bash ignores 'SIGTERM' (*note
+     Signals::).
+
+  10. In the absence of any traps, 'SIGINT' is caught and handled (*note
+     Signals::).  'SIGINT' will interrupt some shell builtins.
+
+  11. An interactive login shell sends a 'SIGHUP' to all jobs on exit if
+     the 'huponexit' shell option has been enabled (*note Signals::).
+
+  12. The '-n' invocation option is ignored, and 'set -n' has no effect
+     (*note The Set Builtin::).
+
+  13. Bash will check for mail periodically, depending on the values of
+     the 'MAIL', 'MAILPATH', and 'MAILCHECK' shell variables (*note Bash
+     Variables::).
+
+  14. Expansion errors due to references to unbound shell variables
+     after 'set -u' has been enabled will not cause the shell to exit
+     (*note The Set Builtin::).
+
+  15. The shell will not exit on expansion errors caused by VAR being
+     unset or null in '${VAR:?WORD}' expansions (*note Shell Parameter
+     Expansion::).
+
+  16. Redirection errors encountered by shell builtins will not cause
+     the shell to exit.
+
+  17. When running in POSIX mode, a special builtin returning an error
+     status will not cause the shell to exit (*note Bash POSIX Mode::).
+
+  18. A failed 'exec' will not cause the shell to exit (*note Bourne
+     Shell Builtins::).
+
+  19. Parser syntax errors will not cause the shell to exit.
+
+  20. Simple spelling correction for directory arguments to the 'cd'
+     builtin is enabled by default (see the description of the 'cdspell'
+     option to the 'shopt' builtin in *note The Shopt Builtin::).
+
+  21. The shell will check the value of the 'TMOUT' variable and exit if
+     a command is not read within the specified number of seconds after
+     printing '$PS1' (*note Bash Variables::).
+
+
+File: bashref.info,  Node: Bash Conditional Expressions,  Next: Shell Arithmetic,  Prev: Interactive Shells,  Up: Bash Features
+
+6.4 Bash Conditional Expressions
+================================
+
+Conditional expressions are used by the '[[' compound command and the
+'test' and '[' builtin commands.  The 'test' and '[' commands determine
+their behavior based on the number of arguments; see the descriptions of
+those commands for any other command-specific actions.
+
+   Expressions may be unary or binary, and are formed from the following
+primaries.  Unary expressions are often used to examine the status of a
+file.  There are string operators and numeric comparison operators as
+well.  Bash handles several filenames specially when they are used in
+expressions.  If the operating system on which Bash is running provides
+these special files, Bash will use them; otherwise it will emulate them
+internally with this behavior: If the FILE argument to one of the
+primaries is of the form '/dev/fd/N', then file descriptor N is checked.
+If the FILE argument to one of the primaries is one of '/dev/stdin',
+'/dev/stdout', or '/dev/stderr', file descriptor 0, 1, or 2,
+respectively, is checked.
+
+   When used with '[[', the '<' and '>' operators sort lexicographically
+using the current locale.  The 'test' command uses ASCII ordering.
+
+   Unless otherwise specified, primaries that operate on files follow
+symbolic links and operate on the target of the link, rather than the
+link itself.
+
+'-a FILE'
+     True if FILE exists.
+
+'-b FILE'
+     True if FILE exists and is a block special file.
+
+'-c FILE'
+     True if FILE exists and is a character special file.
+
+'-d FILE'
+     True if FILE exists and is a directory.
+
+'-e FILE'
+     True if FILE exists.
+
+'-f FILE'
+     True if FILE exists and is a regular file.
+
+'-g FILE'
+     True if FILE exists and its set-group-id bit is set.
+
+'-h FILE'
+     True if FILE exists and is a symbolic link.
+
+'-k FILE'
+     True if FILE exists and its "sticky" bit is set.
+
+'-p FILE'
+     True if FILE exists and is a named pipe (FIFO).
+
+'-r FILE'
+     True if FILE exists and is readable.
+
+'-s FILE'
+     True if FILE exists and has a size greater than zero.
+
+'-t FD'
+     True if file descriptor FD is open and refers to a terminal.
+
+'-u FILE'
+     True if FILE exists and its set-user-id bit is set.
+
+'-w FILE'
+     True if FILE exists and is writable.
+
+'-x FILE'
+     True if FILE exists and is executable.
+
+'-G FILE'
+     True if FILE exists and is owned by the effective group id.
+
+'-L FILE'
+     True if FILE exists and is a symbolic link.
+
+'-N FILE'
+     True if FILE exists and has been modified since it was last read.
+
+'-O FILE'
+     True if FILE exists and is owned by the effective user id.
+
+'-S FILE'
+     True if FILE exists and is a socket.
+
+'FILE1 -ef FILE2'
+     True if FILE1 and FILE2 refer to the same device and inode numbers.
+
+'FILE1 -nt FILE2'
+     True if FILE1 is newer (according to modification date) than FILE2,
+     or if FILE1 exists and FILE2 does not.
+
+'FILE1 -ot FILE2'
+     True if FILE1 is older than FILE2, or if FILE2 exists and FILE1
+     does not.
+
+'-o OPTNAME'
+     True if the shell option OPTNAME is enabled.  The list of options
+     appears in the description of the '-o' option to the 'set' builtin
+     (*note The Set Builtin::).
+
+'-v VARNAME'
+     True if the shell variable VARNAME is set (has been assigned a
+     value).
+
+'-R VARNAME'
+     True if the shell variable VARNAME is set and is a name reference.
+
+'-z STRING'
+     True if the length of STRING is zero.
+
+'-n STRING'
+'STRING'
+     True if the length of STRING is non-zero.
+
+'STRING1 == STRING2'
+'STRING1 = STRING2'
+     True if the strings are equal.  When used with the '[[' command,
+     this performs pattern matching as described above (*note
+     Conditional Constructs::).
+
+     '=' should be used with the 'test' command for POSIX conformance.
+
+'STRING1 != STRING2'
+     True if the strings are not equal.
+
+'STRING1 < STRING2'
+     True if STRING1 sorts before STRING2 lexicographically.
+
+'STRING1 > STRING2'
+     True if STRING1 sorts after STRING2 lexicographically.
+
+'ARG1 OP ARG2'
+     'OP' is one of '-eq', '-ne', '-lt', '-le', '-gt', or '-ge'.  These
+     arithmetic binary operators return true if ARG1 is equal to, not
+     equal to, less than, less than or equal to, greater than, or
+     greater than or equal to ARG2, respectively.  ARG1 and ARG2 may be
+     positive or negative integers.  When used with the '[[' command,
+     ARG1 and ARG2 are evaluated as arithmetic expressions (*note Shell
+     Arithmetic::).
+
+
+File: bashref.info,  Node: Shell Arithmetic,  Next: Aliases,  Prev: Bash Conditional Expressions,  Up: Bash Features
+
+6.5 Shell Arithmetic
+====================
+
+The shell allows arithmetic expressions to be evaluated, as one of the
+shell expansions or by using the '((' compound command, the 'let'
+builtin, or the '-i' option to the 'declare' builtin.
+
+   Evaluation is done in fixed-width integers with no check for
+overflow, though division by 0 is trapped and flagged as an error.  The
+operators and their precedence, associativity, and values are the same
+as in the C language.  The following list of operators is grouped into
+levels of equal-precedence operators.  The levels are listed in order of
+decreasing precedence.
+
+'ID++ ID--'
+     variable post-increment and post-decrement
+
+'++ID --ID'
+     variable pre-increment and pre-decrement
+
+'- +'
+     unary minus and plus
+
+'! ~'
+     logical and bitwise negation
+
+'**'
+     exponentiation
+
+'* / %'
+     multiplication, division, remainder
+
+'+ -'
+     addition, subtraction
+
+'<< >>'
+     left and right bitwise shifts
+
+'<= >= < >'
+     comparison
+
+'== !='
+     equality and inequality
+
+'&'
+     bitwise AND
+
+'^'
+     bitwise exclusive OR
+
+'|'
+     bitwise OR
+
+'&&'
+     logical AND
+
+'||'
+     logical OR
+
+'expr ? expr : expr'
+     conditional operator
+
+'= *= /= %= += -= <<= >>= &= ^= |='
+     assignment
+
+'expr1 , expr2'
+     comma
+
+   Shell variables are allowed as operands; parameter expansion is
+performed before the expression is evaluated.  Within an expression,
+shell variables may also be referenced by name without using the
+parameter expansion syntax.  A shell variable that is null or unset
+evaluates to 0 when referenced by name without using the parameter
+expansion syntax.  The value of a variable is evaluated as an arithmetic
+expression when it is referenced, or when a variable which has been
+given the INTEGER attribute using 'declare -i' is assigned a value.  A
+null value evaluates to 0.  A shell variable need not have its INTEGER
+attribute turned on to be used in an expression.
+
+   Integer constants follow the C language definition, without suffixes
+or character constants.  Constants with a leading 0 are interpreted as
+octal numbers.  A leading '0x' or '0X' denotes hexadecimal.  Otherwise,
+numbers take the form [BASE'#']N, where the optional BASE is a decimal
+number between 2 and 64 representing the arithmetic base, and N is a
+number in that base.  If BASE'#' is omitted, then base 10 is used.  When
+specifying N, if a non-digit is required, the digits greater than 9 are
+represented by the lowercase letters, the uppercase letters, '@', and
+'_', in that order.  If BASE is less than or equal to 36, lowercase and
+uppercase letters may be used interchangeably to represent numbers
+between 10 and 35.
+
+   Operators are evaluated in order of precedence.  Sub-expressions in
+parentheses are evaluated first and may override the precedence rules
+above.
+
+
+File: bashref.info,  Node: Aliases,  Next: Arrays,  Prev: Shell Arithmetic,  Up: Bash Features
+
+6.6 Aliases
+===========
+
+ALIASES allow a string to be substituted for a word when it is used as
+the first word of a simple command.  The shell maintains a list of
+aliases that may be set and unset with the 'alias' and 'unalias' builtin
+commands.
+
+   The first word of each simple command, if unquoted, is checked to see
+if it has an alias.  If so, that word is replaced by the text of the
+alias.  The characters '/', '$', '`', '=' and any of the shell
+metacharacters or quoting characters listed above may not appear in an
+alias name.  The replacement text may contain any valid shell input,
+including shell metacharacters.  The first word of the replacement text
+is tested for aliases, but a word that is identical to an alias being
+expanded is not expanded a second time.  This means that one may alias
+'ls' to '"ls -F"', for instance, and Bash does not try to recursively
+expand the replacement text.  If the last character of the alias value
+is a BLANK, then the next command word following the alias is also
+checked for alias expansion.
+
+   Aliases are created and listed with the 'alias' command, and removed
+with the 'unalias' command.
+
+   There is no mechanism for using arguments in the replacement text, as
+in 'csh'.  If arguments are needed, a shell function should be used
+(*note Shell Functions::).
+
+   Aliases are not expanded when the shell is not interactive, unless
+the 'expand_aliases' shell option is set using 'shopt' (*note The Shopt
+Builtin::).
+
+   The rules concerning the definition and use of aliases are somewhat
+confusing.  Bash always reads at least one complete line of input, and
+all lines that make up a compound command, before executing any of the
+commands on that line or the compound command.  Aliases are expanded
+when a command is read, not when it is executed.  Therefore, an alias
+definition appearing on the same line as another command does not take
+effect until the next line of input is read.  The commands following the
+alias definition on that line are not affected by the new alias.  This
+behavior is also an issue when functions are executed.  Aliases are
+expanded when a function definition is read, not when the function is
+executed, because a function definition is itself a command.  As a
+consequence, aliases defined in a function are not available until after
+that function is executed.  To be safe, always put alias definitions on
+a separate line, and do not use 'alias' in compound commands.
+
+   For almost every purpose, shell functions are preferred over aliases.
+
+
+File: bashref.info,  Node: Arrays,  Next: The Directory Stack,  Prev: Aliases,  Up: Bash Features
+
+6.7 Arrays
+==========
+
+Bash provides one-dimensional indexed and associative array variables.
+Any variable may be used as an indexed array; the 'declare' builtin will
+explicitly declare an array.  There is no maximum limit on the size of
+an array, nor any requirement that members be indexed or assigned
+contiguously.  Indexed arrays are referenced using integers (including
+arithmetic expressions (*note Shell Arithmetic::)) and are zero-based;
+associative arrays use arbitrary strings.  Unless otherwise noted,
+indexed array indices must be non-negative integers.
+
+   An indexed array is created automatically if any variable is assigned
+to using the syntax
+     NAME[SUBSCRIPT]=VALUE
+
+The SUBSCRIPT is treated as an arithmetic expression that must evaluate
+to a number.  To explicitly declare an array, use
+     declare -a NAME
+The syntax
+     declare -a NAME[SUBSCRIPT]
+is also accepted; the SUBSCRIPT is ignored.
+
+Associative arrays are created using
+     declare -A NAME
+
+   Attributes may be specified for an array variable using the 'declare'
+and 'readonly' builtins.  Each attribute applies to all members of an
+array.
+
+   Arrays are assigned to using compound assignments of the form
+     NAME=(VALUE1 VALUE2 ... )
+where each VALUE may be of the form '[SUBSCRIPT]='STRING.  Indexed array
+assignments do not require anything but STRING.  When assigning to
+indexed arrays, if the optional subscript is supplied, that index is
+assigned to; otherwise the index of the element assigned is the last
+index assigned to by the statement plus one.  Indexing starts at zero.
+
+   Each VALUE in the list undergoes all the shell expansions described
+above (*note Shell Expansions::).
+
+   When assigning to an associative array, the words in a compound
+assignment may be either assignment statements, for which the subscript
+is required, or a list of words that is interpreted as a sequence of
+alternating keys and values: NAME=(KEY1 VALUE1 KEY2 VALUE2 ... ).  These
+are treated identically to NAME=( [KEY1]=VALUE1 [KEY2]=VALUE2 ... ).
+The first word in the list determines how the remaining words are
+interpreted; all assignments in a list must be of the same type.  When
+using key/value pairs, the keys may not be missing or empty; a final
+missing value is treated like the empty string.
+
+   This syntax is also accepted by the 'declare' builtin.  Individual
+array elements may be assigned to using the 'NAME[SUBSCRIPT]=VALUE'
+syntax introduced above.
+
+   When assigning to an indexed array, if NAME is subscripted by a
+negative number, that number is interpreted as relative to one greater
+than the maximum index of NAME, so negative indices count back from the
+end of the array, and an index of -1 references the last element.
+
+   Any element of an array may be referenced using '${NAME[SUBSCRIPT]}'.
+The braces are required to avoid conflicts with the shell's filename
+expansion operators.  If the SUBSCRIPT is '@' or '*', the word expands
+to all members of the array NAME.  These subscripts differ only when the
+word appears within double quotes.  If the word is double-quoted,
+'${NAME[*]}' expands to a single word with the value of each array
+member separated by the first character of the 'IFS' variable, and
+'${NAME[@]}' expands each element of NAME to a separate word.  When
+there are no array members, '${NAME[@]}' expands to nothing.  If the
+double-quoted expansion occurs within a word, the expansion of the first
+parameter is joined with the beginning part of the original word, and
+the expansion of the last parameter is joined with the last part of the
+original word.  This is analogous to the expansion of the special
+parameters '@' and '*'.  '${#NAME[SUBSCRIPT]}' expands to the length of
+'${NAME[SUBSCRIPT]}'.  If SUBSCRIPT is '@' or '*', the expansion is the
+number of elements in the array.  If the SUBSCRIPT used to reference an
+element of an indexed array evaluates to a number less than zero, it is
+interpreted as relative to one greater than the maximum index of the
+array, so negative indices count back from the end of the array, and an
+index of -1 refers to the last element.
+
+   Referencing an array variable without a subscript is equivalent to
+referencing with a subscript of 0.  Any reference to a variable using a
+valid subscript is legal, and 'bash' will create an array if necessary.
+
+   An array variable is considered set if a subscript has been assigned
+a value.  The null string is a valid value.
+
+   It is possible to obtain the keys (indices) of an array as well as
+the values.  ${!NAME[@]} and ${!NAME[*]} expand to the indices assigned
+in array variable NAME.  The treatment when in double quotes is similar
+to the expansion of the special parameters '@' and '*' within double
+quotes.
+
+   The 'unset' builtin is used to destroy arrays.  'unset
+NAME[SUBSCRIPT]' destroys the array element at index SUBSCRIPT.
+Negative subscripts to indexed arrays are interpreted as described
+above.  Unsetting the last element of an array variable does not unset
+the variable.  'unset NAME', where NAME is an array, removes the entire
+array.  A subscript of '*' or '@' also removes the entire array.
+
+   When using a variable name with a subscript as an argument to a
+command, such as with 'unset', without using the word expansion syntax
+described above, the argument is subject to the shell's filename
+expansion.  If filename expansion is not desired, the argument should be
+quoted.
+
+   The 'declare', 'local', and 'readonly' builtins each accept a '-a'
+option to specify an indexed array and a '-A' option to specify an
+associative array.  If both options are supplied, '-A' takes precedence.
+The 'read' builtin accepts a '-a' option to assign a list of words read
+from the standard input to an array, and can read values from the
+standard input into individual array elements.  The 'set' and 'declare'
+builtins display array values in a way that allows them to be reused as
+input.
+
+
+File: bashref.info,  Node: The Directory Stack,  Next: Controlling the Prompt,  Prev: Arrays,  Up: Bash Features
+
+6.8 The Directory Stack
+=======================
+
+* Menu:
+
+* Directory Stack Builtins::		Bash builtin commands to manipulate
+					the directory stack.
+
+The directory stack is a list of recently-visited directories.  The
+'pushd' builtin adds directories to the stack as it changes the current
+directory, and the 'popd' builtin removes specified directories from the
+stack and changes the current directory to the directory removed.  The
+'dirs' builtin displays the contents of the directory stack.  The
+current directory is always the "top" of the directory stack.
+
+   The contents of the directory stack are also visible as the value of
+the 'DIRSTACK' shell variable.
+
+
+File: bashref.info,  Node: Directory Stack Builtins,  Up: The Directory Stack
+
+6.8.1 Directory Stack Builtins
+------------------------------
+
+'dirs'
+          dirs [-clpv] [+N | -N]
+
+     Display the list of currently remembered directories.  Directories
+     are added to the list with the 'pushd' command; the 'popd' command
+     removes directories from the list.  The current directory is always
+     the first directory in the stack.
+
+     '-c'
+          Clears the directory stack by deleting all of the elements.
+     '-l'
+          Produces a listing using full pathnames; the default listing
+          format uses a tilde to denote the home directory.
+     '-p'
+          Causes 'dirs' to print the directory stack with one entry per
+          line.
+     '-v'
+          Causes 'dirs' to print the directory stack with one entry per
+          line, prefixing each entry with its index in the stack.
+     '+N'
+          Displays the Nth directory (counting from the left of the list
+          printed by 'dirs' when invoked without options), starting with
+          zero.
+     '-N'
+          Displays the Nth directory (counting from the right of the
+          list printed by 'dirs' when invoked without options), starting
+          with zero.
+
+'popd'
+          popd [-n] [+N | -N]
+
+     When no arguments are given, 'popd' removes the top directory from
+     the stack and performs a 'cd' to the new top directory.  The
+     elements are numbered from 0 starting at the first directory listed
+     with 'dirs'; that is, 'popd' is equivalent to 'popd +0'.
+
+     '-n'
+          Suppresses the normal change of directory when removing
+          directories from the stack, so that only the stack is
+          manipulated.
+     '+N'
+          Removes the Nth directory (counting from the left of the list
+          printed by 'dirs'), starting with zero.
+     '-N'
+          Removes the Nth directory (counting from the right of the list
+          printed by 'dirs'), starting with zero.
+
+'pushd'
+          pushd [-n] [+N | -N | DIR]
+
+     Save the current directory on the top of the directory stack and
+     then 'cd' to DIR.  With no arguments, 'pushd' exchanges the top two
+     directories and makes the new top the current directory.
+
+     '-n'
+          Suppresses the normal change of directory when rotating or
+          adding directories to the stack, so that only the stack is
+          manipulated.
+     '+N'
+          Brings the Nth directory (counting from the left of the list
+          printed by 'dirs', starting with zero) to the top of the list
+          by rotating the stack.
+     '-N'
+          Brings the Nth directory (counting from the right of the list
+          printed by 'dirs', starting with zero) to the top of the list
+          by rotating the stack.
+     'DIR'
+          Makes DIR be the top of the stack, making it the new current
+          directory as if it had been supplied as an argument to the
+          'cd' builtin.
+
+
+File: bashref.info,  Node: Controlling the Prompt,  Next: The Restricted Shell,  Prev: The Directory Stack,  Up: Bash Features
+
+6.9 Controlling the Prompt
+==========================
+
+Bash examines the value of the array variable 'PROMPT_COMMANDS' just
+before printing each primary prompt.  If any elements in
+'PROMPT_COMMANDS' are set and non-null, Bash executes each value, in
+numeric order, just as if it had been typed on the command line.
+
+   In addition, the following table describes the special characters
+which can appear in the prompt variables 'PS0', 'PS1', 'PS2', and 'PS4':
+
+'\a'
+     A bell character.
+'\d'
+     The date, in "Weekday Month Date" format (e.g., "Tue May 26").
+'\D{FORMAT}'
+     The FORMAT is passed to 'strftime'(3) and the result is inserted
+     into the prompt string; an empty FORMAT results in a
+     locale-specific time representation.  The braces are required.
+'\e'
+     An escape character.
+'\h'
+     The hostname, up to the first '.'.
+'\H'
+     The hostname.
+'\j'
+     The number of jobs currently managed by the shell.
+'\l'
+     The basename of the shell's terminal device name.
+'\n'
+     A newline.
+'\r'
+     A carriage return.
+'\s'
+     The name of the shell, the basename of '$0' (the portion following
+     the final slash).
+'\t'
+     The time, in 24-hour HH:MM:SS format.
+'\T'
+     The time, in 12-hour HH:MM:SS format.
+'\@'
+     The time, in 12-hour am/pm format.
+'\A'
+     The time, in 24-hour HH:MM format.
+'\u'
+     The username of the current user.
+'\v'
+     The version of Bash (e.g., 2.00)
+'\V'
+     The release of Bash, version + patchlevel (e.g., 2.00.0)
+'\w'
+     The current working directory, with '$HOME' abbreviated with a
+     tilde (uses the '$PROMPT_DIRTRIM' variable).
+'\W'
+     The basename of '$PWD', with '$HOME' abbreviated with a tilde.
+'\!'
+     The history number of this command.
+'\#'
+     The command number of this command.
+'\$'
+     If the effective uid is 0, '#', otherwise '$'.
+'\NNN'
+     The character whose ASCII code is the octal value NNN.
+'\\'
+     A backslash.
+'\['
+     Begin a sequence of non-printing characters.  This could be used to
+     embed a terminal control sequence into the prompt.
+'\]'
+     End a sequence of non-printing characters.
+
+   The command number and the history number are usually different: the
+history number of a command is its position in the history list, which
+may include commands restored from the history file (*note Bash History
+Facilities::), while the command number is the position in the sequence
+of commands executed during the current shell session.
+
+   After the string is decoded, it is expanded via parameter expansion,
+command substitution, arithmetic expansion, and quote removal, subject
+to the value of the 'promptvars' shell option (*note The Shopt
+Builtin::).  This can have unwanted side effects if escaped portions of
+the string appear within command substitution or contain characters
+special to word expansion.
+
+
+File: bashref.info,  Node: The Restricted Shell,  Next: Bash POSIX Mode,  Prev: Controlling the Prompt,  Up: Bash Features
+
+6.10 The Restricted Shell
+=========================
+
+If Bash is started with the name 'rbash', or the '--restricted' or '-r'
+option is supplied at invocation, the shell becomes restricted.  A
+restricted shell is used to set up an environment more controlled than
+the standard shell.  A restricted shell behaves identically to 'bash'
+with the exception that the following are disallowed or not performed:
+
+   * Changing directories with the 'cd' builtin.
+   * Setting or unsetting the values of the 'SHELL', 'PATH', 'HISTFILE',
+     'ENV', or 'BASH_ENV' variables.
+   * Specifying command names containing slashes.
+   * Specifying a filename containing a slash as an argument to the '.'
+     builtin command.
+   * Specifying a filename containing a slash as an argument to the
+     'history' builtin command.
+   * Specifying a filename containing a slash as an argument to the '-p'
+     option to the 'hash' builtin command.
+   * Importing function definitions from the shell environment at
+     startup.
+   * Parsing the value of 'SHELLOPTS' from the shell environment at
+     startup.
+   * Redirecting output using the '>', '>|', '<>', '>&', '&>', and '>>'
+     redirection operators.
+   * Using the 'exec' builtin to replace the shell with another command.
+   * Adding or deleting builtin commands with the '-f' and '-d' options
+     to the 'enable' builtin.
+   * Using the 'enable' builtin command to enable disabled shell
+     builtins.
+   * Specifying the '-p' option to the 'command' builtin.
+   * Turning off restricted mode with 'set +r' or 'set +o restricted'.
+
+   These restrictions are enforced after any startup files are read.
+
+   When a command that is found to be a shell script is executed (*note
+Shell Scripts::), 'rbash' turns off any restrictions in the shell
+spawned to execute the script.
+
+   The restricted shell mode is only one component of a useful
+restricted environment.  It should be accompanied by setting 'PATH' to a
+value that allows execution of only a few verified commands (commands
+that allow shell escapes are particularly vulnerable), leaving the user
+in a non-writable directory other than his home directory after login,
+not allowing the restricted shell to execute shell scripts, and cleaning
+the environment of variables that cause some commands to modify their
+behavior (e.g., 'VISUAL' or 'PAGER').
+
+   Modern systems provide more secure ways to implement a restricted
+environment, such as 'jails', 'zones', or 'containers'.
+
+
+File: bashref.info,  Node: Bash POSIX Mode,  Next: Shell Compatibility Mode,  Prev: The Restricted Shell,  Up: Bash Features
+
+6.11 Bash POSIX Mode
+====================
+
+Starting Bash with the '--posix' command-line option or executing 'set
+-o posix' while Bash is running will cause Bash to conform more closely
+to the POSIX standard by changing the behavior to match that specified
+by POSIX in areas where the Bash default differs.
+
+   When invoked as 'sh', Bash enters POSIX mode after reading the
+startup files.
+
+   The following list is what's changed when 'POSIX mode' is in effect:
+
+  1. Bash ensures that the 'POSIXLY_CORRECT' variable is set.
+
+  2. When a command in the hash table no longer exists, Bash will
+     re-search '$PATH' to find the new location.  This is also available
+     with 'shopt -s checkhash'.
+
+  3. Bash will not insert a command without the execute bit set into the
+     command hash table, even if it returns it as a (last-ditch) result
+     from a '$PATH' search.
+
+  4. The message printed by the job control code and builtins when a job
+     exits with a non-zero status is 'Done(status)'.
+
+  5. The message printed by the job control code and builtins when a job
+     is stopped is 'Stopped(SIGNAME)', where SIGNAME is, for example,
+     'SIGTSTP'.
+
+  6. Alias expansion is always enabled, even in non-interactive shells.
+
+  7. Reserved words appearing in a context where reserved words are
+     recognized do not undergo alias expansion.
+
+  8. The POSIX 'PS1' and 'PS2' expansions of '!' to the history number
+     and '!!' to '!' are enabled, and parameter expansion is performed
+     on the values of 'PS1' and 'PS2' regardless of the setting of the
+     'promptvars' option.
+
+  9. The POSIX startup files are executed ('$ENV') rather than the
+     normal Bash files.
+
+  10. Tilde expansion is only performed on assignments preceding a
+     command name, rather than on all assignment statements on the line.
+
+  11. The default history file is '~/.sh_history' (this is the default
+     value of '$HISTFILE').
+
+  12. Redirection operators do not perform filename expansion on the
+     word in the redirection unless the shell is interactive.
+
+  13. Redirection operators do not perform word splitting on the word in
+     the redirection.
+
+  14. Function names must be valid shell 'name's.  That is, they may not
+     contain characters other than letters, digits, and underscores, and
+     may not start with a digit.  Declaring a function with an invalid
+     name causes a fatal syntax error in non-interactive shells.
+
+  15. Function names may not be the same as one of the POSIX special
+     builtins.
+
+  16. POSIX special builtins are found before shell functions during
+     command lookup.
+
+  17. When printing shell function definitions (e.g., by 'type'), Bash
+     does not print the 'function' keyword.
+
+  18. Literal tildes that appear as the first character in elements of
+     the 'PATH' variable are not expanded as described above under *note
+     Tilde Expansion::.
+
+  19. The 'time' reserved word may be used by itself as a command.  When
+     used in this way, it displays timing statistics for the shell and
+     its completed children.  The 'TIMEFORMAT' variable controls the
+     format of the timing information.
+
+  20. When parsing and expanding a ${...} expansion that appears within
+     double quotes, single quotes are no longer special and cannot be
+     used to quote a closing brace or other special character, unless
+     the operator is one of those defined to perform pattern removal.
+     In this case, they do not have to appear as matched pairs.
+
+  21. The parser does not recognize 'time' as a reserved word if the
+     next token begins with a '-'.
+
+  22. The '!' character does not introduce history expansion within a
+     double-quoted string, even if the 'histexpand' option is enabled.
+
+  23. If a POSIX special builtin returns an error status, a
+     non-interactive shell exits.  The fatal errors are those listed in
+     the POSIX standard, and include things like passing incorrect
+     options, redirection errors, variable assignment errors for
+     assignments preceding the command name, and so on.
+
+  24. A non-interactive shell exits with an error status if a variable
+     assignment error occurs when no command name follows the assignment
+     statements.  A variable assignment error occurs, for example, when
+     trying to assign a value to a readonly variable.
+
+  25. A non-interactive shell exits with an error status if a variable
+     assignment error occurs in an assignment statement preceding a
+     special builtin, but not with any other simple command.
+
+  26. A non-interactive shell exits with an error status if the
+     iteration variable in a 'for' statement or the selection variable
+     in a 'select' statement is a readonly variable.
+
+  27. Non-interactive shells exit if FILENAME in '.'  FILENAME is not
+     found.
+
+  28. Non-interactive shells exit if a syntax error in an arithmetic
+     expansion results in an invalid expression.
+
+  29. Non-interactive shells exit if a parameter expansion error occurs.
+
+  30. Non-interactive shells exit if there is a syntax error in a script
+     read with the '.' or 'source' builtins, or in a string processed by
+     the 'eval' builtin.
+
+  31. While variable indirection is available, it may not be applied to
+     the '#' and '?' special parameters.
+
+  32. When expanding the '*' special parameter in a pattern context
+     where the expansion is double-quoted does not treat the '$*' as if
+     it were double-quoted.
+
+  33. Assignment statements preceding POSIX special builtins persist in
+     the shell environment after the builtin completes.
+
+  34. The 'command' builtin does not prevent builtins that take
+     assignment statements as arguments from expanding them as
+     assignment statements; when not in POSIX mode, assignment builtins
+     lose their assignment statement expansion properties when preceded
+     by 'command'.
+
+  35. The 'bg' builtin uses the required format to describe each job
+     placed in the background, which does not include an indication of
+     whether the job is the current or previous job.
+
+  36. The output of 'kill -l' prints all the signal names on a single
+     line, separated by spaces, without the 'SIG' prefix.
+
+  37. The 'kill' builtin does not accept signal names with a 'SIG'
+     prefix.
+
+  38. The 'export' and 'readonly' builtin commands display their output
+     in the format required by POSIX.
+
+  39. The 'trap' builtin displays signal names without the leading
+     'SIG'.
+
+  40. The 'trap' builtin doesn't check the first argument for a possible
+     signal specification and revert the signal handling to the original
+     disposition if it is, unless that argument consists solely of
+     digits and is a valid signal number.  If users want to reset the
+     handler for a given signal to the original disposition, they should
+     use '-' as the first argument.
+
+  41. 'trap -p' displays signals whose dispositions are set to SIG_DFL
+     and those that were ignored when the shell started.
+
+  42. The '.' and 'source' builtins do not search the current directory
+     for the filename argument if it is not found by searching 'PATH'.
+
+  43. Enabling POSIX mode has the effect of setting the
+     'inherit_errexit' option, so subshells spawned to execute command
+     substitutions inherit the value of the '-e' option from the parent
+     shell.  When the 'inherit_errexit' option is not enabled, Bash
+     clears the '-e' option in such subshells.
+
+  44. Enabling POSIX mode has the effect of setting the 'shift_verbose'
+     option, so numeric arguments to 'shift' that exceed the number of
+     positional parameters will result in an error message.
+
+  45. When the 'alias' builtin displays alias definitions, it does not
+     display them with a leading 'alias ' unless the '-p' option is
+     supplied.
+
+  46. When the 'set' builtin is invoked without options, it does not
+     display shell function names and definitions.
+
+  47. When the 'set' builtin is invoked without options, it displays
+     variable values without quotes, unless they contain shell
+     metacharacters, even if the result contains nonprinting characters.
+
+  48. When the 'cd' builtin is invoked in LOGICAL mode, and the pathname
+     constructed from '$PWD' and the directory name supplied as an
+     argument does not refer to an existing directory, 'cd' will fail
+     instead of falling back to PHYSICAL mode.
+
+  49. When the 'cd' builtin cannot change a directory because the length
+     of the pathname constructed from '$PWD' and the directory name
+     supplied as an argument exceeds PATH_MAX when all symbolic links
+     are expanded, 'cd' will fail instead of attempting to use only the
+     supplied directory name.
+
+  50. The 'pwd' builtin verifies that the value it prints is the same as
+     the current directory, even if it is not asked to check the file
+     system with the '-P' option.
+
+  51. When listing the history, the 'fc' builtin does not include an
+     indication of whether or not a history entry has been modified.
+
+  52. The default editor used by 'fc' is 'ed'.
+
+  53. The 'type' and 'command' builtins will not report a non-executable
+     file as having been found, though the shell will attempt to execute
+     such a file if it is the only so-named file found in '$PATH'.
+
+  54. The 'vi' editing mode will invoke the 'vi' editor directly when
+     the 'v' command is run, instead of checking '$VISUAL' and
+     '$EDITOR'.
+
+  55. When the 'xpg_echo' option is enabled, Bash does not attempt to
+     interpret any arguments to 'echo' as options.  Each argument is
+     displayed, after escape characters are converted.
+
+  56. The 'ulimit' builtin uses a block size of 512 bytes for the '-c'
+     and '-f' options.
+
+  57. The arrival of 'SIGCHLD' when a trap is set on 'SIGCHLD' does not
+     interrupt the 'wait' builtin and cause it to return immediately.
+     The trap command is run once for each child that exits.
+
+  58. The 'read' builtin may be interrupted by a signal for which a trap
+     has been set.  If Bash receives a trapped signal while executing
+     'read', the trap handler executes and 'read' returns an exit status
+     greater than 128.
+
+  59. Bash removes an exited background process's status from the list
+     of such statuses after the 'wait' builtin is used to obtain it.
+
+   There is other POSIX behavior that Bash does not implement by default
+even when in POSIX mode.  Specifically:
+
+  1. The 'fc' builtin checks '$EDITOR' as a program to edit history
+     entries if 'FCEDIT' is unset, rather than defaulting directly to
+     'ed'.  'fc' uses 'ed' if 'EDITOR' is unset.
+
+  2. As noted above, Bash requires the 'xpg_echo' option to be enabled
+     for the 'echo' builtin to be fully conformant.
+
+   Bash can be configured to be POSIX-conformant by default, by
+specifying the '--enable-strict-posix-default' to 'configure' when
+building (*note Optional Features::).
+
+
+File: bashref.info,  Node: Shell Compatibility Mode,  Prev: Bash POSIX Mode,  Up: Bash Features
+
+6.12 Shell Compatibility Mode
+=============================
+
+Bash-4.0 introduced the concept of a 'shell compatibility level',
+specified as a set of options to the shopt builtin ('compat31',
+'compat32', 'compat40', 'compat41', and so on).  There is only one
+current compatibility level - each option is mutually exclusive.  The
+compatibility level is intended to allow users to select behavior from
+previous versions that is incompatible with newer versions while they
+migrate scripts to use current features and behavior.  It's intended to
+be a temporary solution.
+
+   This section does not mention behavior that is standard for a
+particular version (e.g., setting 'compat32' means that quoting the rhs
+of the regexp matching operator quotes special regexp characters in the
+word, which is default behavior in bash-3.2 and above).
+
+   If a user enables, say, 'compat32', it may affect the behavior of
+other compatibility levels up to and including the current compatibility
+level.  The idea is that each compatibility level controls behavior that
+changed in that version of Bash, but that behavior may have been present
+in earlier versions.  For instance, the change to use locale-based
+comparisons with the '[[' command came in bash-4.1, and earlier versions
+used ASCII-based comparisons, so enabling 'compat32' will enable
+ASCII-based comparisons as well.  That granularity may not be sufficient
+for all uses, and as a result users should employ compatibility levels
+carefully.  Read the documentation for a particular feature to find out
+the current behavior.
+
+   Bash-4.3 introduced a new shell variable: 'BASH_COMPAT'.  The value
+assigned to this variable (a decimal version number like 4.2, or an
+integer corresponding to the 'compat'NN option, like 42) determines the
+compatibility level.
+
+   Starting with bash-4.4, Bash has begun deprecating older
+compatibility levels.  Eventually, the options will be removed in favor
+of 'BASH_COMPAT'.
+
+   Bash-5.0 is the final version for which there will be an individual
+shopt option for the previous version.  Users should use 'BASH_COMPAT'
+on bash-5.0 and later versions.
+
+   The following table describes the behavior changes controlled by each
+compatibility level setting.  The 'compat'NN tag is used as shorthand
+for setting the compatibility level to NN using one of the following
+mechanisms.  For versions prior to bash-5.0, the compatibility level may
+be set using the corresponding 'compat'NN shopt option.  For bash-4.3
+and later versions, the 'BASH_COMPAT' variable is preferred, and it is
+required for bash-5.1 and later versions.
+
+'compat31'
+        * quoting the rhs of the '[[' command's regexp matching operator
+          (=~) has no special effect
+
+'compat32'
+        * interrupting a command list such as "a ; b ; c" causes the
+          execution of the next command in the list (in bash-4.0 and
+          later versions, the shell acts as if it received the
+          interrupt, so interrupting one command in a list aborts the
+          execution of the entire list)
+
+'compat40'
+        * the '<' and '>' operators to the '[[' command do not consider
+          the current locale when comparing strings; they use ASCII
+          ordering.  Bash versions prior to bash-4.1 use ASCII collation
+          and strcmp(3); bash-4.1 and later use the current locale's
+          collation sequence and strcoll(3).
+
+'compat41'
+        * in posix mode, 'time' may be followed by options and still be
+          recognized as a reserved word (this is POSIX interpretation
+          267)
+        * in posix mode, the parser requires that an even number of
+          single quotes occur in the WORD portion of a double-quoted
+          ${...} parameter expansion and treats them specially, so that
+          characters within the single quotes are considered quoted
+          (this is POSIX interpretation 221)
+
+'compat42'
+        * the replacement string in double-quoted pattern substitution
+          does not undergo quote removal, as it does in versions after
+          bash-4.2
+        * in posix mode, single quotes are considered special when
+          expanding the WORD portion of a double-quoted ${...} parameter
+          expansion and can be used to quote a closing brace or other
+          special character (this is part of POSIX interpretation 221);
+          in later versions, single quotes are not special within
+          double-quoted word expansions
+
+'compat43'
+        * the shell does not print a warning message if an attempt is
+          made to use a quoted compound assignment as an argument to
+          declare (declare -a foo='(1 2)').  Later versions warn that
+          this usage is deprecated
+        * word expansion errors are considered non-fatal errors that
+          cause the current command to fail, even in posix mode (the
+          default behavior is to make them fatal errors that cause the
+          shell to exit)
+        * when executing a shell function, the loop state
+          (while/until/etc.)  is not reset, so 'break' or 'continue' in
+          that function will break or continue loops in the calling
+          context.  Bash-4.4 and later reset the loop state to prevent
+          this
+
+'compat44'
+        * the shell sets up the values used by 'BASH_ARGV' and
+          'BASH_ARGC' so they can expand to the shell's positional
+          parameters even if extended debugging mode is not enabled
+        * a subshell inherits loops from its parent context, so 'break'
+          or 'continue' will cause the subshell to exit.  Bash-5.0 and
+          later reset the loop state to prevent the exit
+        * variable assignments preceding builtins like 'export' and
+          'readonly' that set attributes continue to affect variables
+          with the same name in the calling environment even if the
+          shell is not in posix mode
+
+'compat50 (set using BASH_COMPAT)'
+        * Bash-5.1 changed the way '$RANDOM' is generated to introduce
+          slightly more randomness.  If the shell compatibility level is
+          set to 50 or lower, it reverts to the method from bash-5.0 and
+          previous versions, so seeding the random number generator by
+          assigning a value to 'RANDOM' will produce the same sequence
+          as in bash-5.0
+        * If the command hash table is empty, Bash versions prior to
+          bash-5.1 printed an informational message to that effect, even
+          when producing output that can be reused as input.  Bash-5.1
+          suppresses that message when the '-l' option is supplied.
+
+
+File: bashref.info,  Node: Job Control,  Next: Command Line Editing,  Prev: Bash Features,  Up: Top
+
+7 Job Control
+*************
+
+This chapter discusses what job control is, how it works, and how Bash
+allows you to access its facilities.
+
+* Menu:
+
+* Job Control Basics::		How job control works.
+* Job Control Builtins::	Bash builtin commands used to interact
+				with job control.
+* Job Control Variables::	Variables Bash uses to customize job
+				control.
+
+
+File: bashref.info,  Node: Job Control Basics,  Next: Job Control Builtins,  Up: Job Control
+
+7.1 Job Control Basics
+======================
+
+Job control refers to the ability to selectively stop (suspend) the
+execution of processes and continue (resume) their execution at a later
+point.  A user typically employs this facility via an interactive
+interface supplied jointly by the operating system kernel's terminal
+driver and Bash.
+
+   The shell associates a JOB with each pipeline.  It keeps a table of
+currently executing jobs, which may be listed with the 'jobs' command.
+When Bash starts a job asynchronously, it prints a line that looks like:
+     [1] 25647
+indicating that this job is job number 1 and that the process ID of the
+last process in the pipeline associated with this job is 25647.  All of
+the processes in a single pipeline are members of the same job.  Bash
+uses the JOB abstraction as the basis for job control.
+
+   To facilitate the implementation of the user interface to job
+control, the operating system maintains the notion of a current terminal
+process group ID.  Members of this process group (processes whose
+process group ID is equal to the current terminal process group ID)
+receive keyboard-generated signals such as 'SIGINT'.  These processes
+are said to be in the foreground.  Background processes are those whose
+process group ID differs from the terminal's; such processes are immune
+to keyboard-generated signals.  Only foreground processes are allowed to
+read from or, if the user so specifies with 'stty tostop', write to the
+terminal.  Background processes which attempt to read from (write to
+when 'stty tostop' is in effect) the terminal are sent a 'SIGTTIN'
+('SIGTTOU') signal by the kernel's terminal driver, which, unless
+caught, suspends the process.
+
+   If the operating system on which Bash is running supports job
+control, Bash contains facilities to use it.  Typing the SUSPEND
+character (typically '^Z', Control-Z) while a process is running causes
+that process to be stopped and returns control to Bash.  Typing the
+DELAYED SUSPEND character (typically '^Y', Control-Y) causes the process
+to be stopped when it attempts to read input from the terminal, and
+control to be returned to Bash.  The user then manipulates the state of
+this job, using the 'bg' command to continue it in the background, the
+'fg' command to continue it in the foreground, or the 'kill' command to
+kill it.  A '^Z' takes effect immediately, and has the additional side
+effect of causing pending output and typeahead to be discarded.
+
+   There are a number of ways to refer to a job in the shell.  The
+character '%' introduces a job specification (JOBSPEC).
+
+   Job number 'n' may be referred to as '%n'.  The symbols '%%' and '%+'
+refer to the shell's notion of the current job, which is the last job
+stopped while it was in the foreground or started in the background.  A
+single '%' (with no accompanying job specification) also refers to the
+current job.  The previous job may be referenced using '%-'.  If there
+is only a single job, '%+' and '%-' can both be used to refer to that
+job.  In output pertaining to jobs (e.g., the output of the 'jobs'
+command), the current job is always flagged with a '+', and the previous
+job with a '-'.
+
+   A job may also be referred to using a prefix of the name used to
+start it, or using a substring that appears in its command line.  For
+example, '%ce' refers to a stopped job whose command name begins with
+'ce'.  Using '%?ce', on the other hand, refers to any job containing the
+string 'ce' in its command line.  If the prefix or substring matches
+more than one job, Bash reports an error.
+
+   Simply naming a job can be used to bring it into the foreground: '%1'
+is a synonym for 'fg %1', bringing job 1 from the background into the
+foreground.  Similarly, '%1 &' resumes job 1 in the background,
+equivalent to 'bg %1'
+
+   The shell learns immediately whenever a job changes state.  Normally,
+Bash waits until it is about to print a prompt before reporting changes
+in a job's status so as to not interrupt any other output.  If the '-b'
+option to the 'set' builtin is enabled, Bash reports such changes
+immediately (*note The Set Builtin::).  Any trap on 'SIGCHLD' is
+executed for each child process that exits.
+
+   If an attempt to exit Bash is made while jobs are stopped, (or
+running, if the 'checkjobs' option is enabled - see *note The Shopt
+Builtin::), the shell prints a warning message, and if the 'checkjobs'
+option is enabled, lists the jobs and their statuses.  The 'jobs'
+command may then be used to inspect their status.  If a second attempt
+to exit is made without an intervening command, Bash does not print
+another warning, and any stopped jobs are terminated.
+
+   When the shell is waiting for a job or process using the 'wait'
+builtin, and job control is enabled, 'wait' will return when the job
+changes state.  The '-f' option causes 'wait' to wait until the job or
+process terminates before returning.
+
+
+File: bashref.info,  Node: Job Control Builtins,  Next: Job Control Variables,  Prev: Job Control Basics,  Up: Job Control
+
+7.2 Job Control Builtins
+========================
+
+'bg'
+          bg [JOBSPEC ...]
+
+     Resume each suspended job JOBSPEC in the background, as if it had
+     been started with '&'.  If JOBSPEC is not supplied, the current job
+     is used.  The return status is zero unless it is run when job
+     control is not enabled, or, when run with job control enabled, any
+     JOBSPEC was not found or specifies a job that was started without
+     job control.
+
+'fg'
+          fg [JOBSPEC]
+
+     Resume the job JOBSPEC in the foreground and make it the current
+     job.  If JOBSPEC is not supplied, the current job is used.  The
+     return status is that of the command placed into the foreground, or
+     non-zero if run when job control is disabled or, when run with job
+     control enabled, JOBSPEC does not specify a valid job or JOBSPEC
+     specifies a job that was started without job control.
+
+'jobs'
+          jobs [-lnprs] [JOBSPEC]
+          jobs -x COMMAND [ARGUMENTS]
+
+     The first form lists the active jobs.  The options have the
+     following meanings:
+
+     '-l'
+          List process IDs in addition to the normal information.
+
+     '-n'
+          Display information only about jobs that have changed status
+          since the user was last notified of their status.
+
+     '-p'
+          List only the process ID of the job's process group leader.
+
+     '-r'
+          Display only running jobs.
+
+     '-s'
+          Display only stopped jobs.
+
+     If JOBSPEC is given, output is restricted to information about that
+     job.  If JOBSPEC is not supplied, the status of all jobs is listed.
+
+     If the '-x' option is supplied, 'jobs' replaces any JOBSPEC found
+     in COMMAND or ARGUMENTS with the corresponding process group ID,
+     and executes COMMAND, passing it ARGUMENTs, returning its exit
+     status.
+
+'kill'
+          kill [-s SIGSPEC] [-n SIGNUM] [-SIGSPEC] JOBSPEC or PID
+          kill -l|-L [EXIT_STATUS]
+
+     Send a signal specified by SIGSPEC or SIGNUM to the process named
+     by job specification JOBSPEC or process ID PID.  SIGSPEC is either
+     a case-insensitive signal name such as 'SIGINT' (with or without
+     the 'SIG' prefix) or a signal number; SIGNUM is a signal number.
+     If SIGSPEC and SIGNUM are not present, 'SIGTERM' is used.  The '-l'
+     option lists the signal names.  If any arguments are supplied when
+     '-l' is given, the names of the signals corresponding to the
+     arguments are listed, and the return status is zero.  EXIT_STATUS
+     is a number specifying a signal number or the exit status of a
+     process terminated by a signal.  The '-L' option is equivalent to
+     '-l'.  The return status is zero if at least one signal was
+     successfully sent, or non-zero if an error occurs or an invalid
+     option is encountered.
+
+'wait'
+          wait [-fn] [-p VARNAME] [JOBSPEC or PID ...]
+
+     Wait until the child process specified by each process ID PID or
+     job specification JOBSPEC exits and return the exit status of the
+     last command waited for.  If a job spec is given, all processes in
+     the job are waited for.  If no arguments are given, 'wait' waits
+     for all running background jobs and the last-executed process
+     substitution, if its process id is the same as $!, and the return
+     status is zero.  If the '-n' option is supplied, 'wait' waits for a
+     single job from the list of PIDS or JOBSPECS or, if no arguments
+     are supplied, any job, to complete and returns its exit status.  If
+     none of the supplied arguments is a child of the shell, or if no
+     arguments are supplied and the shell has no unwaited-for children,
+     the exit status is 127.  If the '-p' option is supplied, the
+     process or job identifier of the job for which the exit status is
+     returned is assigned to the variable VARNAME named by the option
+     argument.  The variable will be unset initially, before any
+     assignment.  This is useful only when the '-n' option is supplied.
+     Supplying the '-f' option, when job control is enabled, forces
+     'wait' to wait for each PID or JOBSPEC to terminate before
+     returning its status, intead of returning when it changes status.
+     If neither JOBSPEC nor PID specifies an active child process of the
+     shell, the return status is 127.
+
+'disown'
+          disown [-ar] [-h] [JOBSPEC ... | PID ... ]
+
+     Without options, remove each JOBSPEC from the table of active jobs.
+     If the '-h' option is given, the job is not removed from the table,
+     but is marked so that 'SIGHUP' is not sent to the job if the shell
+     receives a 'SIGHUP'.  If JOBSPEC is not present, and neither the
+     '-a' nor the '-r' option is supplied, the current job is used.  If
+     no JOBSPEC is supplied, the '-a' option means to remove or mark all
+     jobs; the '-r' option without a JOBSPEC argument restricts
+     operation to running jobs.
+
+'suspend'
+          suspend [-f]
+
+     Suspend the execution of this shell until it receives a 'SIGCONT'
+     signal.  A login shell cannot be suspended; the '-f' option can be
+     used to override this and force the suspension.
+
+   When job control is not active, the 'kill' and 'wait' builtins do not
+accept JOBSPEC arguments.  They must be supplied process IDs.
+
+
+File: bashref.info,  Node: Job Control Variables,  Prev: Job Control Builtins,  Up: Job Control
+
+7.3 Job Control Variables
+=========================
+
+'auto_resume'
+     This variable controls how the shell interacts with the user and
+     job control.  If this variable exists then single word simple
+     commands without redirections are treated as candidates for
+     resumption of an existing job.  There is no ambiguity allowed; if
+     there is more than one job beginning with the string typed, then
+     the most recently accessed job will be selected.  The name of a
+     stopped job, in this context, is the command line used to start it.
+     If this variable is set to the value 'exact', the string supplied
+     must match the name of a stopped job exactly; if set to
+     'substring', the string supplied needs to match a substring of the
+     name of a stopped job.  The 'substring' value provides
+     functionality analogous to the '%?' job ID (*note Job Control
+     Basics::).  If set to any other value, the supplied string must be
+     a prefix of a stopped job's name; this provides functionality
+     analogous to the '%' job ID.
+
+
+File: bashref.info,  Node: Command Line Editing,  Next: Using History Interactively,  Prev: Job Control,  Up: Top
+
+8 Command Line Editing
+**********************
+
+This chapter describes the basic features of the GNU command line
+editing interface.  Command line editing is provided by the Readline
+library, which is used by several different programs, including Bash.
+Command line editing is enabled by default when using an interactive
+shell, unless the '--noediting' option is supplied at shell invocation.
+Line editing is also used when using the '-e' option to the 'read'
+builtin command (*note Bash Builtins::).  By default, the line editing
+commands are similar to those of Emacs.  A vi-style line editing
+interface is also available.  Line editing can be enabled at any time
+using the '-o emacs' or '-o vi' options to the 'set' builtin command
+(*note The Set Builtin::), or disabled using the '+o emacs' or '+o vi'
+options to 'set'.
+
+* Menu:
+
+* Introduction and Notation::	Notation used in this text.
+* Readline Interaction::	The minimum set of commands for editing a line.
+* Readline Init File::		Customizing Readline from a user's view.
+* Bindable Readline Commands::	A description of most of the Readline commands
+				available for binding
+* Readline vi Mode::		A short description of how to make Readline
+				behave like the vi editor.
+* Programmable Completion::	How to specify the possible completions for
+				a specific command.
+* Programmable Completion Builtins::	Builtin commands to specify how to
+				complete arguments for a particular command.
+* A Programmable Completion Example::	An example shell function for
+				generating possible completions.
+
+
+File: bashref.info,  Node: Introduction and Notation,  Next: Readline Interaction,  Up: Command Line Editing
+
+8.1 Introduction to Line Editing
+================================
+
+The following paragraphs describe the notation used to represent
+keystrokes.
+
+   The text 'C-k' is read as 'Control-K' and describes the character
+produced when the <k> key is pressed while the Control key is depressed.
+
+   The text 'M-k' is read as 'Meta-K' and describes the character
+produced when the Meta key (if you have one) is depressed, and the <k>
+key is pressed.  The Meta key is labeled <ALT> on many keyboards.  On
+keyboards with two keys labeled <ALT> (usually to either side of the
+space bar), the <ALT> on the left side is generally set to work as a
+Meta key.  The <ALT> key on the right may also be configured to work as
+a Meta key or may be configured as some other modifier, such as a
+Compose key for typing accented characters.
+
+   If you do not have a Meta or <ALT> key, or another key working as a
+Meta key, the identical keystroke can be generated by typing <ESC>
+_first_, and then typing <k>.  Either process is known as "metafying"
+the <k> key.
+
+   The text 'M-C-k' is read as 'Meta-Control-k' and describes the
+character produced by "metafying" 'C-k'.
+
+   In addition, several keys have their own names.  Specifically, <DEL>,
+<ESC>, <LFD>, <SPC>, <RET>, and <TAB> all stand for themselves when seen
+in this text, or in an init file (*note Readline Init File::).  If your
+keyboard lacks a <LFD> key, typing <C-j> will produce the desired
+character.  The <RET> key may be labeled <Return> or <Enter> on some
+keyboards.
+
+
+File: bashref.info,  Node: Readline Interaction,  Next: Readline Init File,  Prev: Introduction and Notation,  Up: Command Line Editing
+
+8.2 Readline Interaction
+========================
+
+Often during an interactive session you type in a long line of text,
+only to notice that the first word on the line is misspelled.  The
+Readline library gives you a set of commands for manipulating the text
+as you type it in, allowing you to just fix your typo, and not forcing
+you to retype the majority of the line.  Using these editing commands,
+you move the cursor to the place that needs correction, and delete or
+insert the text of the corrections.  Then, when you are satisfied with
+the line, you simply press <RET>.  You do not have to be at the end of
+the line to press <RET>; the entire line is accepted regardless of the
+location of the cursor within the line.
+
+* Menu:
+
+* Readline Bare Essentials::	The least you need to know about Readline.
+* Readline Movement Commands::	Moving about the input line.
+* Readline Killing Commands::	How to delete text, and how to get it back!
+* Readline Arguments::		Giving numeric arguments to commands.
+* Searching::			Searching through previous lines.
+
+
+File: bashref.info,  Node: Readline Bare Essentials,  Next: Readline Movement Commands,  Up: Readline Interaction
+
+8.2.1 Readline Bare Essentials
+------------------------------
+
+In order to enter characters into the line, simply type them.  The typed
+character appears where the cursor was, and then the cursor moves one
+space to the right.  If you mistype a character, you can use your erase
+character to back up and delete the mistyped character.
+
+   Sometimes you may mistype a character, and not notice the error until
+you have typed several other characters.  In that case, you can type
+'C-b' to move the cursor to the left, and then correct your mistake.
+Afterwards, you can move the cursor to the right with 'C-f'.
+
+   When you add text in the middle of a line, you will notice that
+characters to the right of the cursor are 'pushed over' to make room for
+the text that you have inserted.  Likewise, when you delete text behind
+the cursor, characters to the right of the cursor are 'pulled back' to
+fill in the blank space created by the removal of the text.  A list of
+the bare essentials for editing the text of an input line follows.
+
+'C-b'
+     Move back one character.
+'C-f'
+     Move forward one character.
+<DEL> or <Backspace>
+     Delete the character to the left of the cursor.
+'C-d'
+     Delete the character underneath the cursor.
+Printing characters
+     Insert the character into the line at the cursor.
+'C-_' or 'C-x C-u'
+     Undo the last editing command.  You can undo all the way back to an
+     empty line.
+
+(Depending on your configuration, the <Backspace> key be set to delete
+the character to the left of the cursor and the <DEL> key set to delete
+the character underneath the cursor, like 'C-d', rather than the
+character to the left of the cursor.)
+
+
+File: bashref.info,  Node: Readline Movement Commands,  Next: Readline Killing Commands,  Prev: Readline Bare Essentials,  Up: Readline Interaction
+
+8.2.2 Readline Movement Commands
+--------------------------------
+
+The above table describes the most basic keystrokes that you need in
+order to do editing of the input line.  For your convenience, many other
+commands have been added in addition to 'C-b', 'C-f', 'C-d', and <DEL>.
+Here are some commands for moving more rapidly about the line.
+
+'C-a'
+     Move to the start of the line.
+'C-e'
+     Move to the end of the line.
+'M-f'
+     Move forward a word, where a word is composed of letters and
+     digits.
+'M-b'
+     Move backward a word.
+'C-l'
+     Clear the screen, reprinting the current line at the top.
+
+   Notice how 'C-f' moves forward a character, while 'M-f' moves forward
+a word.  It is a loose convention that control keystrokes operate on
+characters while meta keystrokes operate on words.
+
+
+File: bashref.info,  Node: Readline Killing Commands,  Next: Readline Arguments,  Prev: Readline Movement Commands,  Up: Readline Interaction
+
+8.2.3 Readline Killing Commands
+-------------------------------
+
+"Killing" text means to delete the text from the line, but to save it
+away for later use, usually by "yanking" (re-inserting) it back into the
+line.  ('Cut' and 'paste' are more recent jargon for 'kill' and 'yank'.)
+
+   If the description for a command says that it 'kills' text, then you
+can be sure that you can get the text back in a different (or the same)
+place later.
+
+   When you use a kill command, the text is saved in a "kill-ring".  Any
+number of consecutive kills save all of the killed text together, so
+that when you yank it back, you get it all.  The kill ring is not line
+specific; the text that you killed on a previously typed line is
+available to be yanked back later, when you are typing another line.
+
+   Here is the list of commands for killing text.
+
+'C-k'
+     Kill the text from the current cursor position to the end of the
+     line.
+
+'M-d'
+     Kill from the cursor to the end of the current word, or, if between
+     words, to the end of the next word.  Word boundaries are the same
+     as those used by 'M-f'.
+
+'M-<DEL>'
+     Kill from the cursor the start of the current word, or, if between
+     words, to the start of the previous word.  Word boundaries are the
+     same as those used by 'M-b'.
+
+'C-w'
+     Kill from the cursor to the previous whitespace.  This is different
+     than 'M-<DEL>' because the word boundaries differ.
+
+   Here is how to "yank" the text back into the line.  Yanking means to
+copy the most-recently-killed text from the kill buffer.
+
+'C-y'
+     Yank the most recently killed text back into the buffer at the
+     cursor.
+
+'M-y'
+     Rotate the kill-ring, and yank the new top.  You can only do this
+     if the prior command is 'C-y' or 'M-y'.
+
+
+File: bashref.info,  Node: Readline Arguments,  Next: Searching,  Prev: Readline Killing Commands,  Up: Readline Interaction
+
+8.2.4 Readline Arguments
+------------------------
+
+You can pass numeric arguments to Readline commands.  Sometimes the
+argument acts as a repeat count, other times it is the sign of the
+argument that is significant.  If you pass a negative argument to a
+command which normally acts in a forward direction, that command will
+act in a backward direction.  For example, to kill text back to the
+start of the line, you might type 'M-- C-k'.
+
+   The general way to pass numeric arguments to a command is to type
+meta digits before the command.  If the first 'digit' typed is a minus
+sign ('-'), then the sign of the argument will be negative.  Once you
+have typed one meta digit to get the argument started, you can type the
+remainder of the digits, and then the command.  For example, to give the
+'C-d' command an argument of 10, you could type 'M-1 0 C-d', which will
+delete the next ten characters on the input line.
+
+
+File: bashref.info,  Node: Searching,  Prev: Readline Arguments,  Up: Readline Interaction
+
+8.2.5 Searching for Commands in the History
+-------------------------------------------
+
+Readline provides commands for searching through the command history
+(*note Bash History Facilities::) for lines containing a specified
+string.  There are two search modes: "incremental" and
+"non-incremental".
+
+   Incremental searches begin before the user has finished typing the
+search string.  As each character of the search string is typed,
+Readline displays the next entry from the history matching the string
+typed so far.  An incremental search requires only as many characters as
+needed to find the desired history entry.  To search backward in the
+history for a particular string, type 'C-r'.  Typing 'C-s' searches
+forward through the history.  The characters present in the value of the
+'isearch-terminators' variable are used to terminate an incremental
+search.  If that variable has not been assigned a value, the <ESC> and
+'C-J' characters will terminate an incremental search.  'C-g' will abort
+an incremental search and restore the original line.  When the search is
+terminated, the history entry containing the search string becomes the
+current line.
+
+   To find other matching entries in the history list, type 'C-r' or
+'C-s' as appropriate.  This will search backward or forward in the
+history for the next entry matching the search string typed so far.  Any
+other key sequence bound to a Readline command will terminate the search
+and execute that command.  For instance, a <RET> will terminate the
+search and accept the line, thereby executing the command from the
+history list.  A movement command will terminate the search, make the
+last line found the current line, and begin editing.
+
+   Readline remembers the last incremental search string.  If two 'C-r's
+are typed without any intervening characters defining a new search
+string, any remembered search string is used.
+
+   Non-incremental searches read the entire search string before
+starting to search for matching history lines.  The search string may be
+typed by the user or be part of the contents of the current line.
+
+
+File: bashref.info,  Node: Readline Init File,  Next: Bindable Readline Commands,  Prev: Readline Interaction,  Up: Command Line Editing
+
+8.3 Readline Init File
+======================
+
+Although the Readline library comes with a set of Emacs-like keybindings
+installed by default, it is possible to use a different set of
+keybindings.  Any user can customize programs that use Readline by
+putting commands in an "inputrc" file, conventionally in his home
+directory.  The name of this file is taken from the value of the shell
+variable 'INPUTRC'.  If that variable is unset, the default is
+'~/.inputrc'.  If that file does not exist or cannot be read, the
+ultimate default is '/etc/inputrc'.  The 'bind' builtin command can also
+be used to set Readline keybindings and variables.  *Note Bash
+Builtins::.
+
+   When a program which uses the Readline library starts up, the init
+file is read, and the key bindings are set.
+
+   In addition, the 'C-x C-r' command re-reads this init file, thus
+incorporating any changes that you might have made to it.
+
+* Menu:
+
+* Readline Init File Syntax::	Syntax for the commands in the inputrc file.
+
+* Conditional Init Constructs::	Conditional key bindings in the inputrc file.
+
+* Sample Init File::		An example inputrc file.
+
+
+File: bashref.info,  Node: Readline Init File Syntax,  Next: Conditional Init Constructs,  Up: Readline Init File
+
+8.3.1 Readline Init File Syntax
+-------------------------------
+
+There are only a few basic constructs allowed in the Readline init file.
+Blank lines are ignored.  Lines beginning with a '#' are comments.
+Lines beginning with a '$' indicate conditional constructs (*note
+Conditional Init Constructs::).  Other lines denote variable settings
+and key bindings.
+
+Variable Settings
+     You can modify the run-time behavior of Readline by altering the
+     values of variables in Readline using the 'set' command within the
+     init file.  The syntax is simple:
+
+          set VARIABLE VALUE
+
+     Here, for example, is how to change from the default Emacs-like key
+     binding to use 'vi' line editing commands:
+
+          set editing-mode vi
+
+     Variable names and values, where appropriate, are recognized
+     without regard to case.  Unrecognized variable names are ignored.
+
+     Boolean variables (those that can be set to on or off) are set to
+     on if the value is null or empty, ON (case-insensitive), or 1.  Any
+     other value results in the variable being set to off.
+
+     The 'bind -V' command lists the current Readline variable names and
+     values.  *Note Bash Builtins::.
+
+     A great deal of run-time behavior is changeable with the following
+     variables.
+
+     'bell-style'
+          Controls what happens when Readline wants to ring the terminal
+          bell.  If set to 'none', Readline never rings the bell.  If
+          set to 'visible', Readline uses a visible bell if one is
+          available.  If set to 'audible' (the default), Readline
+          attempts to ring the terminal's bell.
+
+     'bind-tty-special-chars'
+          If set to 'on' (the default), Readline attempts to bind the
+          control characters treated specially by the kernel's terminal
+          driver to their Readline equivalents.
+
+     'blink-matching-paren'
+          If set to 'on', Readline attempts to briefly move the cursor
+          to an opening parenthesis when a closing parenthesis is
+          inserted.  The default is 'off'.
+
+     'colored-completion-prefix'
+          If set to 'on', when listing completions, Readline displays
+          the common prefix of the set of possible completions using a
+          different color.  The color definitions are taken from the
+          value of the 'LS_COLORS' environment variable.  The default is
+          'off'.
+
+     'colored-stats'
+          If set to 'on', Readline displays possible completions using
+          different colors to indicate their file type.  The color
+          definitions are taken from the value of the 'LS_COLORS'
+          environment variable.  The default is 'off'.
+
+     'comment-begin'
+          The string to insert at the beginning of the line when the
+          'insert-comment' command is executed.  The default value is
+          '"#"'.
+
+     'completion-display-width'
+          The number of screen columns used to display possible matches
+          when performing completion.  The value is ignored if it is
+          less than 0 or greater than the terminal screen width.  A
+          value of 0 will cause matches to be displayed one per line.
+          The default value is -1.
+
+     'completion-ignore-case'
+          If set to 'on', Readline performs filename matching and
+          completion in a case-insensitive fashion.  The default value
+          is 'off'.
+
+     'completion-map-case'
+          If set to 'on', and COMPLETION-IGNORE-CASE is enabled,
+          Readline treats hyphens ('-') and underscores ('_') as
+          equivalent when performing case-insensitive filename matching
+          and completion.  The default value is 'off'.
+
+     'completion-prefix-display-length'
+          The length in characters of the common prefix of a list of
+          possible completions that is displayed without modification.
+          When set to a value greater than zero, common prefixes longer
+          than this value are replaced with an ellipsis when displaying
+          possible completions.
+
+     'completion-query-items'
+          The number of possible completions that determines when the
+          user is asked whether the list of possibilities should be
+          displayed.  If the number of possible completions is greater
+          than or equal to this value, Readline will ask whether or not
+          the user wishes to view them; otherwise, they are simply
+          listed.  This variable must be set to an integer value greater
+          than or equal to 0.  A negative value means Readline should
+          never ask.  The default limit is '100'.
+
+     'convert-meta'
+          If set to 'on', Readline will convert characters with the
+          eighth bit set to an ASCII key sequence by stripping the
+          eighth bit and prefixing an <ESC> character, converting them
+          to a meta-prefixed key sequence.  The default value is 'on',
+          but will be set to 'off' if the locale is one that contains
+          eight-bit characters.
+
+     'disable-completion'
+          If set to 'On', Readline will inhibit word completion.
+          Completion characters will be inserted into the line as if
+          they had been mapped to 'self-insert'.  The default is 'off'.
+
+     'echo-control-characters'
+          When set to 'on', on operating systems that indicate they
+          support it, readline echoes a character corresponding to a
+          signal generated from the keyboard.  The default is 'on'.
+
+     'editing-mode'
+          The 'editing-mode' variable controls which default set of key
+          bindings is used.  By default, Readline starts up in Emacs
+          editing mode, where the keystrokes are most similar to Emacs.
+          This variable can be set to either 'emacs' or 'vi'.
+
+     'emacs-mode-string'
+          If the SHOW-MODE-IN-PROMPT variable is enabled, this string is
+          displayed immediately before the last line of the primary
+          prompt when emacs editing mode is active.  The value is
+          expanded like a key binding, so the standard set of meta- and
+          control prefixes and backslash escape sequences is available.
+          Use the '\1' and '\2' escapes to begin and end sequences of
+          non-printing characters, which can be used to embed a terminal
+          control sequence into the mode string.  The default is '@'.
+
+     'enable-bracketed-paste'
+          When set to 'On', Readline will configure the terminal in a
+          way that will enable it to insert each paste into the editing
+          buffer as a single string of characters, instead of treating
+          each character as if it had been read from the keyboard.  This
+          can prevent pasted characters from being interpreted as
+          editing commands.  The default is 'On'.
+
+     'enable-keypad'
+          When set to 'on', Readline will try to enable the application
+          keypad when it is called.  Some systems need this to enable
+          the arrow keys.  The default is 'off'.
+
+     'enable-meta-key'
+          When set to 'on', Readline will try to enable any meta
+          modifier key the terminal claims to support when it is called.
+          On many terminals, the meta key is used to send eight-bit
+          characters.  The default is 'on'.
+
+     'expand-tilde'
+          If set to 'on', tilde expansion is performed when Readline
+          attempts word completion.  The default is 'off'.
+
+     'history-preserve-point'
+          If set to 'on', the history code attempts to place the point
+          (the current cursor position) at the same location on each
+          history line retrieved with 'previous-history' or
+          'next-history'.  The default is 'off'.
+
+     'history-size'
+          Set the maximum number of history entries saved in the history
+          list.  If set to zero, any existing history entries are
+          deleted and no new entries are saved.  If set to a value less
+          than zero, the number of history entries is not limited.  By
+          default, the number of history entries is not limited.  If an
+          attempt is made to set HISTORY-SIZE to a non-numeric value,
+          the maximum number of history entries will be set to 500.
+
+     'horizontal-scroll-mode'
+          This variable can be set to either 'on' or 'off'.  Setting it
+          to 'on' means that the text of the lines being edited will
+          scroll horizontally on a single screen line when they are
+          longer than the width of the screen, instead of wrapping onto
+          a new screen line.  This variable is automatically set to 'on'
+          for terminals of height 1.  By default, this variable is set
+          to 'off'.
+
+     'input-meta'
+          If set to 'on', Readline will enable eight-bit input (it will
+          not clear the eighth bit in the characters it reads),
+          regardless of what the terminal claims it can support.  The
+          default value is 'off', but Readline will set it to 'on' if
+          the locale contains eight-bit characters.  The name
+          'meta-flag' is a synonym for this variable.
+
+     'isearch-terminators'
+          The string of characters that should terminate an incremental
+          search without subsequently executing the character as a
+          command (*note Searching::).  If this variable has not been
+          given a value, the characters <ESC> and 'C-J' will terminate
+          an incremental search.
+
+     'keymap'
+          Sets Readline's idea of the current keymap for key binding
+          commands.  Built-in 'keymap' names are 'emacs',
+          'emacs-standard', 'emacs-meta', 'emacs-ctlx', 'vi', 'vi-move',
+          'vi-command', and 'vi-insert'.  'vi' is equivalent to
+          'vi-command' ('vi-move' is also a synonym); 'emacs' is
+          equivalent to 'emacs-standard'.  Applications may add
+          additional names.  The default value is 'emacs'.  The value of
+          the 'editing-mode' variable also affects the default keymap.
+
+     'keyseq-timeout'
+          Specifies the duration Readline will wait for a character when
+          reading an ambiguous key sequence (one that can form a
+          complete key sequence using the input read so far, or can take
+          additional input to complete a longer key sequence).  If no
+          input is received within the timeout, Readline will use the
+          shorter but complete key sequence.  Readline uses this value
+          to determine whether or not input is available on the current
+          input source ('rl_instream' by default).  The value is
+          specified in milliseconds, so a value of 1000 means that
+          Readline will wait one second for additional input.  If this
+          variable is set to a value less than or equal to zero, or to a
+          non-numeric value, Readline will wait until another key is
+          pressed to decide which key sequence to complete.  The default
+          value is '500'.
+
+     'mark-directories'
+          If set to 'on', completed directory names have a slash
+          appended.  The default is 'on'.
+
+     'mark-modified-lines'
+          This variable, when set to 'on', causes Readline to display an
+          asterisk ('*') at the start of history lines which have been
+          modified.  This variable is 'off' by default.
+
+     'mark-symlinked-directories'
+          If set to 'on', completed names which are symbolic links to
+          directories have a slash appended (subject to the value of
+          'mark-directories').  The default is 'off'.
+
+     'match-hidden-files'
+          This variable, when set to 'on', causes Readline to match
+          files whose names begin with a '.' (hidden files) when
+          performing filename completion.  If set to 'off', the leading
+          '.' must be supplied by the user in the filename to be
+          completed.  This variable is 'on' by default.
+
+     'menu-complete-display-prefix'
+          If set to 'on', menu completion displays the common prefix of
+          the list of possible completions (which may be empty) before
+          cycling through the list.  The default is 'off'.
+
+     'output-meta'
+          If set to 'on', Readline will display characters with the
+          eighth bit set directly rather than as a meta-prefixed escape
+          sequence.  The default is 'off', but Readline will set it to
+          'on' if the locale contains eight-bit characters.
+
+     'page-completions'
+          If set to 'on', Readline uses an internal 'more'-like pager to
+          display a screenful of possible completions at a time.  This
+          variable is 'on' by default.
+
+     'print-completions-horizontally'
+          If set to 'on', Readline will display completions with matches
+          sorted horizontally in alphabetical order, rather than down
+          the screen.  The default is 'off'.
+
+     'revert-all-at-newline'
+          If set to 'on', Readline will undo all changes to history
+          lines before returning when 'accept-line' is executed.  By
+          default, history lines may be modified and retain individual
+          undo lists across calls to 'readline'.  The default is 'off'.
+
+     'show-all-if-ambiguous'
+          This alters the default behavior of the completion functions.
+          If set to 'on', words which have more than one possible
+          completion cause the matches to be listed immediately instead
+          of ringing the bell.  The default value is 'off'.
+
+     'show-all-if-unmodified'
+          This alters the default behavior of the completion functions
+          in a fashion similar to SHOW-ALL-IF-AMBIGUOUS.  If set to
+          'on', words which have more than one possible completion
+          without any possible partial completion (the possible
+          completions don't share a common prefix) cause the matches to
+          be listed immediately instead of ringing the bell.  The
+          default value is 'off'.
+
+     'show-mode-in-prompt'
+          If set to 'on', add a string to the beginning of the prompt
+          indicating the editing mode: emacs, vi command, or vi
+          insertion.  The mode strings are user-settable (e.g.,
+          EMACS-MODE-STRING).  The default value is 'off'.
+
+     'skip-completed-text'
+          If set to 'on', this alters the default completion behavior
+          when inserting a single match into the line.  It's only active
+          when performing completion in the middle of a word.  If
+          enabled, readline does not insert characters from the
+          completion that match characters after point in the word being
+          completed, so portions of the word following the cursor are
+          not duplicated.  For instance, if this is enabled, attempting
+          completion when the cursor is after the 'e' in 'Makefile' will
+          result in 'Makefile' rather than 'Makefilefile', assuming
+          there is a single possible completion.  The default value is
+          'off'.
+
+     'vi-cmd-mode-string'
+          If the SHOW-MODE-IN-PROMPT variable is enabled, this string is
+          displayed immediately before the last line of the primary
+          prompt when vi editing mode is active and in command mode.
+          The value is expanded like a key binding, so the standard set
+          of meta- and control prefixes and backslash escape sequences
+          is available.  Use the '\1' and '\2' escapes to begin and end
+          sequences of non-printing characters, which can be used to
+          embed a terminal control sequence into the mode string.  The
+          default is '(cmd)'.
+
+     'vi-ins-mode-string'
+          If the SHOW-MODE-IN-PROMPT variable is enabled, this string is
+          displayed immediately before the last line of the primary
+          prompt when vi editing mode is active and in insertion mode.
+          The value is expanded like a key binding, so the standard set
+          of meta- and control prefixes and backslash escape sequences
+          is available.  Use the '\1' and '\2' escapes to begin and end
+          sequences of non-printing characters, which can be used to
+          embed a terminal control sequence into the mode string.  The
+          default is '(ins)'.
+
+     'visible-stats'
+          If set to 'on', a character denoting a file's type is appended
+          to the filename when listing possible completions.  The
+          default is 'off'.
+
+Key Bindings
+     The syntax for controlling key bindings in the init file is simple.
+     First you need to find the name of the command that you want to
+     change.  The following sections contain tables of the command name,
+     the default keybinding, if any, and a short description of what the
+     command does.
+
+     Once you know the name of the command, simply place on a line in
+     the init file the name of the key you wish to bind the command to,
+     a colon, and then the name of the command.  There can be no space
+     between the key name and the colon - that will be interpreted as
+     part of the key name.  The name of the key can be expressed in
+     different ways, depending on what you find most comfortable.
+
+     In addition to command names, readline allows keys to be bound to a
+     string that is inserted when the key is pressed (a MACRO).
+
+     The 'bind -p' command displays Readline function names and bindings
+     in a format that can put directly into an initialization file.
+     *Note Bash Builtins::.
+
+     KEYNAME: FUNCTION-NAME or MACRO
+          KEYNAME is the name of a key spelled out in English.  For
+          example:
+               Control-u: universal-argument
+               Meta-Rubout: backward-kill-word
+               Control-o: "> output"
+
+          In the example above, 'C-u' is bound to the function
+          'universal-argument', 'M-DEL' is bound to the function
+          'backward-kill-word', and 'C-o' is bound to run the macro
+          expressed on the right hand side (that is, to insert the text
+          '> output' into the line).
+
+          A number of symbolic character names are recognized while
+          processing this key binding syntax: DEL, ESC, ESCAPE, LFD,
+          NEWLINE, RET, RETURN, RUBOUT, SPACE, SPC, and TAB.
+
+     "KEYSEQ": FUNCTION-NAME or MACRO
+          KEYSEQ differs from KEYNAME above in that strings denoting an
+          entire key sequence can be specified, by placing the key
+          sequence in double quotes.  Some GNU Emacs style key escapes
+          can be used, as in the following example, but the special
+          character names are not recognized.
+
+               "\C-u": universal-argument
+               "\C-x\C-r": re-read-init-file
+               "\e[11~": "Function Key 1"
+
+          In the above example, 'C-u' is again bound to the function
+          'universal-argument' (just as it was in the first example),
+          ''C-x' 'C-r'' is bound to the function 're-read-init-file',
+          and '<ESC> <[> <1> <1> <~>' is bound to insert the text
+          'Function Key 1'.
+
+     The following GNU Emacs style escape sequences are available when
+     specifying key sequences:
+
+     '\C-'
+          control prefix
+     '\M-'
+          meta prefix
+     '\e'
+          an escape character
+     '\\'
+          backslash
+     '\"'
+          <">, a double quotation mark
+     '\''
+          <'>, a single quote or apostrophe
+
+     In addition to the GNU Emacs style escape sequences, a second set
+     of backslash escapes is available:
+
+     '\a'
+          alert (bell)
+     '\b'
+          backspace
+     '\d'
+          delete
+     '\f'
+          form feed
+     '\n'
+          newline
+     '\r'
+          carriage return
+     '\t'
+          horizontal tab
+     '\v'
+          vertical tab
+     '\NNN'
+          the eight-bit character whose value is the octal value NNN
+          (one to three digits)
+     '\xHH'
+          the eight-bit character whose value is the hexadecimal value
+          HH (one or two hex digits)
+
+     When entering the text of a macro, single or double quotes must be
+     used to indicate a macro definition.  Unquoted text is assumed to
+     be a function name.  In the macro body, the backslash escapes
+     described above are expanded.  Backslash will quote any other
+     character in the macro text, including '"' and '''.  For example,
+     the following binding will make ''C-x' \' insert a single '\' into
+     the line:
+          "\C-x\\": "\\"
+
+
+File: bashref.info,  Node: Conditional Init Constructs,  Next: Sample Init File,  Prev: Readline Init File Syntax,  Up: Readline Init File
+
+8.3.2 Conditional Init Constructs
+---------------------------------
+
+Readline implements a facility similar in spirit to the conditional
+compilation features of the C preprocessor which allows key bindings and
+variable settings to be performed as the result of tests.  There are
+four parser directives used.
+
+'$if'
+     The '$if' construct allows bindings to be made based on the editing
+     mode, the terminal being used, or the application using Readline.
+     The text of the test, after any comparison operator, extends to the
+     end of the line; unless otherwise noted, no characters are required
+     to isolate it.
+
+     'mode'
+          The 'mode=' form of the '$if' directive is used to test
+          whether Readline is in 'emacs' or 'vi' mode.  This may be used
+          in conjunction with the 'set keymap' command, for instance, to
+          set bindings in the 'emacs-standard' and 'emacs-ctlx' keymaps
+          only if Readline is starting out in 'emacs' mode.
+
+     'term'
+          The 'term=' form may be used to include terminal-specific key
+          bindings, perhaps to bind the key sequences output by the
+          terminal's function keys.  The word on the right side of the
+          '=' is tested against both the full name of the terminal and
+          the portion of the terminal name before the first '-'.  This
+          allows 'sun' to match both 'sun' and 'sun-cmd', for instance.
+
+     'version'
+          The 'version' test may be used to perform comparisons against
+          specific Readline versions.  The 'version' expands to the
+          current Readline version.  The set of comparison operators
+          includes '=' (and '=='), '!=', '<=', '>=', '<', and '>'.  The
+          version number supplied on the right side of the operator
+          consists of a major version number, an optional decimal point,
+          and an optional minor version (e.g., '7.1').  If the minor
+          version is omitted, it is assumed to be '0'.  The operator may
+          be separated from the string 'version' and from the version
+          number argument by whitespace.  The following example sets a
+          variable if the Readline version being used is 7.0 or newer:
+               $if version >= 7.0
+               set show-mode-in-prompt on
+               $endif
+
+     'application'
+          The APPLICATION construct is used to include
+          application-specific settings.  Each program using the
+          Readline library sets the APPLICATION NAME, and you can test
+          for a particular value.  This could be used to bind key
+          sequences to functions useful for a specific program.  For
+          instance, the following command adds a key sequence that
+          quotes the current or previous word in Bash:
+               $if Bash
+               # Quote the current or previous word
+               "\C-xq": "\eb\"\ef\""
+               $endif
+
+     'variable'
+          The VARIABLE construct provides simple equality tests for
+          Readline variables and values.  The permitted comparison
+          operators are '=', '==', and '!='.  The variable name must be
+          separated from the comparison operator by whitespace; the
+          operator may be separated from the value on the right hand
+          side by whitespace.  Both string and boolean variables may be
+          tested.  Boolean variables must be tested against the values
+          ON and OFF.  The following example is equivalent to the
+          'mode=emacs' test described above:
+               $if editing-mode == emacs
+               set show-mode-in-prompt on
+               $endif
+
+'$endif'
+     This command, as seen in the previous example, terminates an '$if'
+     command.
+
+'$else'
+     Commands in this branch of the '$if' directive are executed if the
+     test fails.
+
+'$include'
+     This directive takes a single filename as an argument and reads
+     commands and bindings from that file.  For example, the following
+     directive reads from '/etc/inputrc':
+          $include /etc/inputrc
+
+
+File: bashref.info,  Node: Sample Init File,  Prev: Conditional Init Constructs,  Up: Readline Init File
+
+8.3.3 Sample Init File
+----------------------
+
+Here is an example of an INPUTRC file.  This illustrates key binding,
+variable assignment, and conditional syntax.
+
+     # This file controls the behaviour of line input editing for
+     # programs that use the GNU Readline library.  Existing
+     # programs include FTP, Bash, and GDB.
+     #
+     # You can re-read the inputrc file with C-x C-r.
+     # Lines beginning with '#' are comments.
+     #
+     # First, include any system-wide bindings and variable
+     # assignments from /etc/Inputrc
+     $include /etc/Inputrc
+
+     #
+     # Set various bindings for emacs mode.
+
+     set editing-mode emacs
+
+     $if mode=emacs
+
+     Meta-Control-h:	backward-kill-word	Text after the function name is ignored
+
+     #
+     # Arrow keys in keypad mode
+     #
+     #"\M-OD":        backward-char
+     #"\M-OC":        forward-char
+     #"\M-OA":        previous-history
+     #"\M-OB":        next-history
+     #
+     # Arrow keys in ANSI mode
+     #
+     "\M-[D":        backward-char
+     "\M-[C":        forward-char
+     "\M-[A":        previous-history
+     "\M-[B":        next-history
+     #
+     # Arrow keys in 8 bit keypad mode
+     #
+     #"\M-\C-OD":       backward-char
+     #"\M-\C-OC":       forward-char
+     #"\M-\C-OA":       previous-history
+     #"\M-\C-OB":       next-history
+     #
+     # Arrow keys in 8 bit ANSI mode
+     #
+     #"\M-\C-[D":       backward-char
+     #"\M-\C-[C":       forward-char
+     #"\M-\C-[A":       previous-history
+     #"\M-\C-[B":       next-history
+
+     C-q: quoted-insert
+
+     $endif
+
+     # An old-style binding.  This happens to be the default.
+     TAB: complete
+
+     # Macros that are convenient for shell interaction
+     $if Bash
+     # edit the path
+     "\C-xp": "PATH=${PATH}\e\C-e\C-a\ef\C-f"
+     # prepare to type a quoted word --
+     # insert open and close double quotes
+     # and move to just after the open quote
+     "\C-x\"": "\"\"\C-b"
+     # insert a backslash (testing backslash escapes
+     # in sequences and macros)
+     "\C-x\\": "\\"
+     # Quote the current or previous word
+     "\C-xq": "\eb\"\ef\""
+     # Add a binding to refresh the line, which is unbound
+     "\C-xr": redraw-current-line
+     # Edit variable on current line.
+     "\M-\C-v": "\C-a\C-k$\C-y\M-\C-e\C-a\C-y="
+     $endif
+
+     # use a visible bell if one is available
+     set bell-style visible
+
+     # don't strip characters to 7 bits when reading
+     set input-meta on
+
+     # allow iso-latin1 characters to be inserted rather
+     # than converted to prefix-meta sequences
+     set convert-meta off
+
+     # display characters with the eighth bit set directly
+     # rather than as meta-prefixed characters
+     set output-meta on
+
+     # if there are 150 or more possible completions for a word,
+     # ask whether or not the user wants to see all of them
+     set completion-query-items 150
+
+     # For FTP
+     $if Ftp
+     "\C-xg": "get \M-?"
+     "\C-xt": "put \M-?"
+     "\M-.": yank-last-arg
+     $endif
+
+
+File: bashref.info,  Node: Bindable Readline Commands,  Next: Readline vi Mode,  Prev: Readline Init File,  Up: Command Line Editing
+
+8.4 Bindable Readline Commands
+==============================
+
+* Menu:
+
+* Commands For Moving::		Moving about the line.
+* Commands For History::	Getting at previous lines.
+* Commands For Text::		Commands for changing text.
+* Commands For Killing::	Commands for killing and yanking.
+* Numeric Arguments::		Specifying numeric arguments, repeat counts.
+* Commands For Completion::	Getting Readline to do the typing for you.
+* Keyboard Macros::		Saving and re-executing typed characters
+* Miscellaneous Commands::	Other miscellaneous commands.
+
+This section describes Readline commands that may be bound to key
+sequences.  You can list your key bindings by executing 'bind -P' or,
+for a more terse format, suitable for an INPUTRC file, 'bind -p'.
+(*Note Bash Builtins::.)  Command names without an accompanying key
+sequence are unbound by default.
+
+   In the following descriptions, "point" refers to the current cursor
+position, and "mark" refers to a cursor position saved by the 'set-mark'
+command.  The text between the point and mark is referred to as the
+"region".
+
+
+File: bashref.info,  Node: Commands For Moving,  Next: Commands For History,  Up: Bindable Readline Commands
+
+8.4.1 Commands For Moving
+-------------------------
+
+'beginning-of-line (C-a)'
+     Move to the start of the current line.
+
+'end-of-line (C-e)'
+     Move to the end of the line.
+
+'forward-char (C-f)'
+     Move forward a character.
+
+'backward-char (C-b)'
+     Move back a character.
+
+'forward-word (M-f)'
+     Move forward to the end of the next word.  Words are composed of
+     letters and digits.
+
+'backward-word (M-b)'
+     Move back to the start of the current or previous word.  Words are
+     composed of letters and digits.
+
+'shell-forward-word (M-C-f)'
+     Move forward to the end of the next word.  Words are delimited by
+     non-quoted shell metacharacters.
+
+'shell-backward-word (M-C-b)'
+     Move back to the start of the current or previous word.  Words are
+     delimited by non-quoted shell metacharacters.
+
+'previous-screen-line ()'
+     Attempt to move point to the same physical screen column on the
+     previous physical screen line.  This will not have the desired
+     effect if the current Readline line does not take up more than one
+     physical line or if point is not greater than the length of the
+     prompt plus the screen width.
+
+'next-screen-line ()'
+     Attempt to move point to the same physical screen column on the
+     next physical screen line.  This will not have the desired effect
+     if the current Readline line does not take up more than one
+     physical line or if the length of the current Readline line is not
+     greater than the length of the prompt plus the screen width.
+
+'clear-display (M-C-l)'
+     Clear the screen and, if possible, the terminal's scrollback
+     buffer, then redraw the current line, leaving the current line at
+     the top of the screen.
+
+'clear-screen (C-l)'
+     Clear the screen, then redraw the current line, leaving the current
+     line at the top of the screen.
+
+'redraw-current-line ()'
+     Refresh the current line.  By default, this is unbound.
+
+
+File: bashref.info,  Node: Commands For History,  Next: Commands For Text,  Prev: Commands For Moving,  Up: Bindable Readline Commands
+
+8.4.2 Commands For Manipulating The History
+-------------------------------------------
+
+'accept-line (Newline or Return)'
+     Accept the line regardless of where the cursor is.  If this line is
+     non-empty, add it to the history list according to the setting of
+     the 'HISTCONTROL' and 'HISTIGNORE' variables.  If this line is a
+     modified history line, then restore the history line to its
+     original state.
+
+'previous-history (C-p)'
+     Move 'back' through the history list, fetching the previous
+     command.
+
+'next-history (C-n)'
+     Move 'forward' through the history list, fetching the next command.
+
+'beginning-of-history (M-<)'
+     Move to the first line in the history.
+
+'end-of-history (M->)'
+     Move to the end of the input history, i.e., the line currently
+     being entered.
+
+'reverse-search-history (C-r)'
+     Search backward starting at the current line and moving 'up'
+     through the history as necessary.  This is an incremental search.
+     This command sets the region to the matched text and activates the
+     mark.
+
+'forward-search-history (C-s)'
+     Search forward starting at the current line and moving 'down'
+     through the history as necessary.  This is an incremental search.
+     This command sets the region to the matched text and activates the
+     mark.
+
+'non-incremental-reverse-search-history (M-p)'
+     Search backward starting at the current line and moving 'up'
+     through the history as necessary using a non-incremental search for
+     a string supplied by the user.  The search string may match
+     anywhere in a history line.
+
+'non-incremental-forward-search-history (M-n)'
+     Search forward starting at the current line and moving 'down'
+     through the history as necessary using a non-incremental search for
+     a string supplied by the user.  The search string may match
+     anywhere in a history line.
+
+'history-search-forward ()'
+     Search forward through the history for the string of characters
+     between the start of the current line and the point.  The search
+     string must match at the beginning of a history line.  This is a
+     non-incremental search.  By default, this command is unbound.
+
+'history-search-backward ()'
+     Search backward through the history for the string of characters
+     between the start of the current line and the point.  The search
+     string must match at the beginning of a history line.  This is a
+     non-incremental search.  By default, this command is unbound.
+
+'history-substring-search-forward ()'
+     Search forward through the history for the string of characters
+     between the start of the current line and the point.  The search
+     string may match anywhere in a history line.  This is a
+     non-incremental search.  By default, this command is unbound.
+
+'history-substring-search-backward ()'
+     Search backward through the history for the string of characters
+     between the start of the current line and the point.  The search
+     string may match anywhere in a history line.  This is a
+     non-incremental search.  By default, this command is unbound.
+
+'yank-nth-arg (M-C-y)'
+     Insert the first argument to the previous command (usually the
+     second word on the previous line) at point.  With an argument N,
+     insert the Nth word from the previous command (the words in the
+     previous command begin with word 0).  A negative argument inserts
+     the Nth word from the end of the previous command.  Once the
+     argument N is computed, the argument is extracted as if the '!N'
+     history expansion had been specified.
+
+'yank-last-arg (M-. or M-_)'
+     Insert last argument to the previous command (the last word of the
+     previous history entry).  With a numeric argument, behave exactly
+     like 'yank-nth-arg'.  Successive calls to 'yank-last-arg' move back
+     through the history list, inserting the last word (or the word
+     specified by the argument to the first call) of each line in turn.
+     Any numeric argument supplied to these successive calls determines
+     the direction to move through the history.  A negative argument
+     switches the direction through the history (back or forward).  The
+     history expansion facilities are used to extract the last argument,
+     as if the '!$' history expansion had been specified.
+
+'operate-and-get-next (C-o)'
+     Accept the current line for return to the calling application as if
+     a newline had been entered, and fetch the next line relative to the
+     current line from the history for editing.  A numeric argument, if
+     supplied, specifies the history entry to use instead of the current
+     line.
+
+
+File: bashref.info,  Node: Commands For Text,  Next: Commands For Killing,  Prev: Commands For History,  Up: Bindable Readline Commands
+
+8.4.3 Commands For Changing Text
+--------------------------------
+
+'end-of-file (usually C-d)'
+     The character indicating end-of-file as set, for example, by
+     'stty'.  If this character is read when there are no characters on
+     the line, and point is at the beginning of the line, Readline
+     interprets it as the end of input and returns EOF.
+
+'delete-char (C-d)'
+     Delete the character at point.  If this function is bound to the
+     same character as the tty EOF character, as 'C-d' commonly is, see
+     above for the effects.
+
+'backward-delete-char (Rubout)'
+     Delete the character behind the cursor.  A numeric argument means
+     to kill the characters instead of deleting them.
+
+'forward-backward-delete-char ()'
+     Delete the character under the cursor, unless the cursor is at the
+     end of the line, in which case the character behind the cursor is
+     deleted.  By default, this is not bound to a key.
+
+'quoted-insert (C-q or C-v)'
+     Add the next character typed to the line verbatim.  This is how to
+     insert key sequences like 'C-q', for example.
+
+'self-insert (a, b, A, 1, !, ...)'
+     Insert yourself.
+
+'bracketed-paste-begin ()'
+     This function is intended to be bound to the "bracketed paste"
+     escape sequence sent by some terminals, and such a binding is
+     assigned by default.  It allows Readline to insert the pasted text
+     as a single unit without treating each character as if it had been
+     read from the keyboard.  The characters are inserted as if each one
+     was bound to 'self-insert' instead of executing any editing
+     commands.
+
+     Bracketed paste sets the region (the characters between point and
+     the mark) to the inserted text.  It uses the concept of an _active
+     mark_: when the mark is active, Readline redisplay uses the
+     terminal's standout mode to denote the region.
+
+'transpose-chars (C-t)'
+     Drag the character before the cursor forward over the character at
+     the cursor, moving the cursor forward as well.  If the insertion
+     point is at the end of the line, then this transposes the last two
+     characters of the line.  Negative arguments have no effect.
+
+'transpose-words (M-t)'
+     Drag the word before point past the word after point, moving point
+     past that word as well.  If the insertion point is at the end of
+     the line, this transposes the last two words on the line.
+
+'upcase-word (M-u)'
+     Uppercase the current (or following) word.  With a negative
+     argument, uppercase the previous word, but do not move the cursor.
+
+'downcase-word (M-l)'
+     Lowercase the current (or following) word.  With a negative
+     argument, lowercase the previous word, but do not move the cursor.
+
+'capitalize-word (M-c)'
+     Capitalize the current (or following) word.  With a negative
+     argument, capitalize the previous word, but do not move the cursor.
+
+'overwrite-mode ()'
+     Toggle overwrite mode.  With an explicit positive numeric argument,
+     switches to overwrite mode.  With an explicit non-positive numeric
+     argument, switches to insert mode.  This command affects only
+     'emacs' mode; 'vi' mode does overwrite differently.  Each call to
+     'readline()' starts in insert mode.
+
+     In overwrite mode, characters bound to 'self-insert' replace the
+     text at point rather than pushing the text to the right.
+     Characters bound to 'backward-delete-char' replace the character
+     before point with a space.
+
+     By default, this command is unbound.
+
+
+File: bashref.info,  Node: Commands For Killing,  Next: Numeric Arguments,  Prev: Commands For Text,  Up: Bindable Readline Commands
+
+8.4.4 Killing And Yanking
+-------------------------
+
+'kill-line (C-k)'
+     Kill the text from point to the end of the line.  With a negative
+     numeric argument, kill backward from the cursor to the beginning of
+     the current line.
+
+'backward-kill-line (C-x Rubout)'
+     Kill backward from the cursor to the beginning of the current line.
+     With a negative numeric argument, kill forward from the cursor to
+     the end of the current line.
+
+'unix-line-discard (C-u)'
+     Kill backward from the cursor to the beginning of the current line.
+
+'kill-whole-line ()'
+     Kill all characters on the current line, no matter where point is.
+     By default, this is unbound.
+
+'kill-word (M-d)'
+     Kill from point to the end of the current word, or if between
+     words, to the end of the next word.  Word boundaries are the same
+     as 'forward-word'.
+
+'backward-kill-word (M-<DEL>)'
+     Kill the word behind point.  Word boundaries are the same as
+     'backward-word'.
+
+'shell-kill-word (M-C-d)'
+     Kill from point to the end of the current word, or if between
+     words, to the end of the next word.  Word boundaries are the same
+     as 'shell-forward-word'.
+
+'shell-backward-kill-word ()'
+     Kill the word behind point.  Word boundaries are the same as
+     'shell-backward-word'.
+
+'shell-transpose-words (M-C-t)'
+     Drag the word before point past the word after point, moving point
+     past that word as well.  If the insertion point is at the end of
+     the line, this transposes the last two words on the line.  Word
+     boundaries are the same as 'shell-forward-word' and
+     'shell-backward-word'.
+
+'unix-word-rubout (C-w)'
+     Kill the word behind point, using white space as a word boundary.
+     The killed text is saved on the kill-ring.
+
+'unix-filename-rubout ()'
+     Kill the word behind point, using white space and the slash
+     character as the word boundaries.  The killed text is saved on the
+     kill-ring.
+
+'delete-horizontal-space ()'
+     Delete all spaces and tabs around point.  By default, this is
+     unbound.
+
+'kill-region ()'
+     Kill the text in the current region.  By default, this command is
+     unbound.
+
+'copy-region-as-kill ()'
+     Copy the text in the region to the kill buffer, so it can be yanked
+     right away.  By default, this command is unbound.
+
+'copy-backward-word ()'
+     Copy the word before point to the kill buffer.  The word boundaries
+     are the same as 'backward-word'.  By default, this command is
+     unbound.
+
+'copy-forward-word ()'
+     Copy the word following point to the kill buffer.  The word
+     boundaries are the same as 'forward-word'.  By default, this
+     command is unbound.
+
+'yank (C-y)'
+     Yank the top of the kill ring into the buffer at point.
+
+'yank-pop (M-y)'
+     Rotate the kill-ring, and yank the new top.  You can only do this
+     if the prior command is 'yank' or 'yank-pop'.
+
+
+File: bashref.info,  Node: Numeric Arguments,  Next: Commands For Completion,  Prev: Commands For Killing,  Up: Bindable Readline Commands
+
+8.4.5 Specifying Numeric Arguments
+----------------------------------
+
+'digit-argument (M-0, M-1, ... M--)'
+     Add this digit to the argument already accumulating, or start a new
+     argument.  'M--' starts a negative argument.
+
+'universal-argument ()'
+     This is another way to specify an argument.  If this command is
+     followed by one or more digits, optionally with a leading minus
+     sign, those digits define the argument.  If the command is followed
+     by digits, executing 'universal-argument' again ends the numeric
+     argument, but is otherwise ignored.  As a special case, if this
+     command is immediately followed by a character that is neither a
+     digit nor minus sign, the argument count for the next command is
+     multiplied by four.  The argument count is initially one, so
+     executing this function the first time makes the argument count
+     four, a second time makes the argument count sixteen, and so on.
+     By default, this is not bound to a key.
+
+
+File: bashref.info,  Node: Commands For Completion,  Next: Keyboard Macros,  Prev: Numeric Arguments,  Up: Bindable Readline Commands
+
+8.4.6 Letting Readline Type For You
+-----------------------------------
+
+'complete (<TAB>)'
+     Attempt to perform completion on the text before point.  The actual
+     completion performed is application-specific.  Bash attempts
+     completion treating the text as a variable (if the text begins with
+     '$'), username (if the text begins with '~'), hostname (if the text
+     begins with '@'), or command (including aliases and functions) in
+     turn.  If none of these produces a match, filename completion is
+     attempted.
+
+'possible-completions (M-?)'
+     List the possible completions of the text before point.  When
+     displaying completions, Readline sets the number of columns used
+     for display to the value of 'completion-display-width', the value
+     of the environment variable 'COLUMNS', or the screen width, in that
+     order.
+
+'insert-completions (M-*)'
+     Insert all completions of the text before point that would have
+     been generated by 'possible-completions'.
+
+'menu-complete ()'
+     Similar to 'complete', but replaces the word to be completed with a
+     single match from the list of possible completions.  Repeated
+     execution of 'menu-complete' steps through the list of possible
+     completions, inserting each match in turn.  At the end of the list
+     of completions, the bell is rung (subject to the setting of
+     'bell-style') and the original text is restored.  An argument of N
+     moves N positions forward in the list of matches; a negative
+     argument may be used to move backward through the list.  This
+     command is intended to be bound to <TAB>, but is unbound by
+     default.
+
+'menu-complete-backward ()'
+     Identical to 'menu-complete', but moves backward through the list
+     of possible completions, as if 'menu-complete' had been given a
+     negative argument.
+
+'delete-char-or-list ()'
+     Deletes the character under the cursor if not at the beginning or
+     end of the line (like 'delete-char').  If at the end of the line,
+     behaves identically to 'possible-completions'.  This command is
+     unbound by default.
+
+'complete-filename (M-/)'
+     Attempt filename completion on the text before point.
+
+'possible-filename-completions (C-x /)'
+     List the possible completions of the text before point, treating it
+     as a filename.
+
+'complete-username (M-~)'
+     Attempt completion on the text before point, treating it as a
+     username.
+
+'possible-username-completions (C-x ~)'
+     List the possible completions of the text before point, treating it
+     as a username.
+
+'complete-variable (M-$)'
+     Attempt completion on the text before point, treating it as a shell
+     variable.
+
+'possible-variable-completions (C-x $)'
+     List the possible completions of the text before point, treating it
+     as a shell variable.
+
+'complete-hostname (M-@)'
+     Attempt completion on the text before point, treating it as a
+     hostname.
+
+'possible-hostname-completions (C-x @)'
+     List the possible completions of the text before point, treating it
+     as a hostname.
+
+'complete-command (M-!)'
+     Attempt completion on the text before point, treating it as a
+     command name.  Command completion attempts to match the text
+     against aliases, reserved words, shell functions, shell builtins,
+     and finally executable filenames, in that order.
+
+'possible-command-completions (C-x !)'
+     List the possible completions of the text before point, treating it
+     as a command name.
+
+'dynamic-complete-history (M-<TAB>)'
+     Attempt completion on the text before point, comparing the text
+     against lines from the history list for possible completion
+     matches.
+
+'dabbrev-expand ()'
+     Attempt menu completion on the text before point, comparing the
+     text against lines from the history list for possible completion
+     matches.
+
+'complete-into-braces (M-{)'
+     Perform filename completion and insert the list of possible
+     completions enclosed within braces so the list is available to the
+     shell (*note Brace Expansion::).
+
+
+File: bashref.info,  Node: Keyboard Macros,  Next: Miscellaneous Commands,  Prev: Commands For Completion,  Up: Bindable Readline Commands
+
+8.4.7 Keyboard Macros
+---------------------
+
+'start-kbd-macro (C-x ()'
+     Begin saving the characters typed into the current keyboard macro.
+
+'end-kbd-macro (C-x ))'
+     Stop saving the characters typed into the current keyboard macro
+     and save the definition.
+
+'call-last-kbd-macro (C-x e)'
+     Re-execute the last keyboard macro defined, by making the
+     characters in the macro appear as if typed at the keyboard.
+
+'print-last-kbd-macro ()'
+     Print the last keboard macro defined in a format suitable for the
+     INPUTRC file.
+
+
+File: bashref.info,  Node: Miscellaneous Commands,  Prev: Keyboard Macros,  Up: Bindable Readline Commands
+
+8.4.8 Some Miscellaneous Commands
+---------------------------------
+
+'re-read-init-file (C-x C-r)'
+     Read in the contents of the INPUTRC file, and incorporate any
+     bindings or variable assignments found there.
+
+'abort (C-g)'
+     Abort the current editing command and ring the terminal's bell
+     (subject to the setting of 'bell-style').
+
+'do-lowercase-version (M-A, M-B, M-X, ...)'
+     If the metafied character X is upper case, run the command that is
+     bound to the corresponding metafied lower case character.  The
+     behavior is undefined if X is already lower case.
+
+'prefix-meta (<ESC>)'
+     Metafy the next character typed.  This is for keyboards without a
+     meta key.  Typing '<ESC> f' is equivalent to typing 'M-f'.
+
+'undo (C-_ or C-x C-u)'
+     Incremental undo, separately remembered for each line.
+
+'revert-line (M-r)'
+     Undo all changes made to this line.  This is like executing the
+     'undo' command enough times to get back to the beginning.
+
+'tilde-expand (M-&)'
+     Perform tilde expansion on the current word.
+
+'set-mark (C-@)'
+     Set the mark to the point.  If a numeric argument is supplied, the
+     mark is set to that position.
+
+'exchange-point-and-mark (C-x C-x)'
+     Swap the point with the mark.  The current cursor position is set
+     to the saved position, and the old cursor position is saved as the
+     mark.
+
+'character-search (C-])'
+     A character is read and point is moved to the next occurrence of
+     that character.  A negative count searches for previous
+     occurrences.
+
+'character-search-backward (M-C-])'
+     A character is read and point is moved to the previous occurrence
+     of that character.  A negative count searches for subsequent
+     occurrences.
+
+'skip-csi-sequence ()'
+     Read enough characters to consume a multi-key sequence such as
+     those defined for keys like Home and End.  Such sequences begin
+     with a Control Sequence Indicator (CSI), usually ESC-[.  If this
+     sequence is bound to "\e[", keys producing such sequences will have
+     no effect unless explicitly bound to a readline command, instead of
+     inserting stray characters into the editing buffer.  This is
+     unbound by default, but usually bound to ESC-[.
+
+'insert-comment (M-#)'
+     Without a numeric argument, the value of the 'comment-begin'
+     variable is inserted at the beginning of the current line.  If a
+     numeric argument is supplied, this command acts as a toggle: if the
+     characters at the beginning of the line do not match the value of
+     'comment-begin', the value is inserted, otherwise the characters in
+     'comment-begin' are deleted from the beginning of the line.  In
+     either case, the line is accepted as if a newline had been typed.
+     The default value of 'comment-begin' causes this command to make
+     the current line a shell comment.  If a numeric argument causes the
+     comment character to be removed, the line will be executed by the
+     shell.
+
+'dump-functions ()'
+     Print all of the functions and their key bindings to the Readline
+     output stream.  If a numeric argument is supplied, the output is
+     formatted in such a way that it can be made part of an INPUTRC
+     file.  This command is unbound by default.
+
+'dump-variables ()'
+     Print all of the settable variables and their values to the
+     Readline output stream.  If a numeric argument is supplied, the
+     output is formatted in such a way that it can be made part of an
+     INPUTRC file.  This command is unbound by default.
+
+'dump-macros ()'
+     Print all of the Readline key sequences bound to macros and the
+     strings they output.  If a numeric argument is supplied, the output
+     is formatted in such a way that it can be made part of an INPUTRC
+     file.  This command is unbound by default.
+
+'glob-complete-word (M-g)'
+     The word before point is treated as a pattern for pathname
+     expansion, with an asterisk implicitly appended.  This pattern is
+     used to generate a list of matching file names for possible
+     completions.
+
+'glob-expand-word (C-x *)'
+     The word before point is treated as a pattern for pathname
+     expansion, and the list of matching file names is inserted,
+     replacing the word.  If a numeric argument is supplied, a '*' is
+     appended before pathname expansion.
+
+'glob-list-expansions (C-x g)'
+     The list of expansions that would have been generated by
+     'glob-expand-word' is displayed, and the line is redrawn.  If a
+     numeric argument is supplied, a '*' is appended before pathname
+     expansion.
+
+'display-shell-version (C-x C-v)'
+     Display version information about the current instance of Bash.
+
+'shell-expand-line (M-C-e)'
+     Expand the line as the shell does.  This performs alias and history
+     expansion as well as all of the shell word expansions (*note Shell
+     Expansions::).
+
+'history-expand-line (M-^)'
+     Perform history expansion on the current line.
+
+'magic-space ()'
+     Perform history expansion on the current line and insert a space
+     (*note History Interaction::).
+
+'alias-expand-line ()'
+     Perform alias expansion on the current line (*note Aliases::).
+
+'history-and-alias-expand-line ()'
+     Perform history and alias expansion on the current line.
+
+'insert-last-argument (M-. or M-_)'
+     A synonym for 'yank-last-arg'.
+
+'edit-and-execute-command (C-x C-e)'
+     Invoke an editor on the current command line, and execute the
+     result as shell commands.  Bash attempts to invoke '$VISUAL',
+     '$EDITOR', and 'emacs' as the editor, in that order.
+
+
+File: bashref.info,  Node: Readline vi Mode,  Next: Programmable Completion,  Prev: Bindable Readline Commands,  Up: Command Line Editing
+
+8.5 Readline vi Mode
+====================
+
+While the Readline library does not have a full set of 'vi' editing
+functions, it does contain enough to allow simple editing of the line.
+The Readline 'vi' mode behaves as specified in the POSIX standard.
+
+   In order to switch interactively between 'emacs' and 'vi' editing
+modes, use the 'set -o emacs' and 'set -o vi' commands (*note The Set
+Builtin::).  The Readline default is 'emacs' mode.
+
+   When you enter a line in 'vi' mode, you are already placed in
+'insertion' mode, as if you had typed an 'i'.  Pressing <ESC> switches
+you into 'command' mode, where you can edit the text of the line with
+the standard 'vi' movement keys, move to previous history lines with 'k'
+and subsequent lines with 'j', and so forth.
+
+
+File: bashref.info,  Node: Programmable Completion,  Next: Programmable Completion Builtins,  Prev: Readline vi Mode,  Up: Command Line Editing
+
+8.6 Programmable Completion
+===========================
+
+When word completion is attempted for an argument to a command for which
+a completion specification (a COMPSPEC) has been defined using the
+'complete' builtin (*note Programmable Completion Builtins::), the
+programmable completion facilities are invoked.
+
+   First, the command name is identified.  If a compspec has been
+defined for that command, the compspec is used to generate the list of
+possible completions for the word.  If the command word is the empty
+string (completion attempted at the beginning of an empty line), any
+compspec defined with the '-E' option to 'complete' is used.  If the
+command word is a full pathname, a compspec for the full pathname is
+searched for first.  If no compspec is found for the full pathname, an
+attempt is made to find a compspec for the portion following the final
+slash.  If those searches do not result in a compspec, any compspec
+defined with the '-D' option to 'complete' is used as the default.  If
+there is no default compspec, Bash attempts alias expansion on the
+command word as a final resort, and attempts to find a compspec for the
+command word from any successful expansion
+
+   Once a compspec has been found, it is used to generate the list of
+matching words.  If a compspec is not found, the default Bash completion
+described above (*note Commands For Completion::) is performed.
+
+   First, the actions specified by the compspec are used.  Only matches
+which are prefixed by the word being completed are returned.  When the
+'-f' or '-d' option is used for filename or directory name completion,
+the shell variable 'FIGNORE' is used to filter the matches.  *Note Bash
+Variables::, for a description of 'FIGNORE'.
+
+   Any completions specified by a filename expansion pattern to the '-G'
+option are generated next.  The words generated by the pattern need not
+match the word being completed.  The 'GLOBIGNORE' shell variable is not
+used to filter the matches, but the 'FIGNORE' shell variable is used.
+
+   Next, the string specified as the argument to the '-W' option is
+considered.  The string is first split using the characters in the 'IFS'
+special variable as delimiters.  Shell quoting is honored within the
+string, in order to provide a mechanism for the words to contain shell
+metacharacters or characters in the value of 'IFS'.  Each word is then
+expanded using brace expansion, tilde expansion, parameter and variable
+expansion, command substitution, and arithmetic expansion, as described
+above (*note Shell Expansions::).  The results are split using the rules
+described above (*note Word Splitting::).  The results of the expansion
+are prefix-matched against the word being completed, and the matching
+words become the possible completions.
+
+   After these matches have been generated, any shell function or
+command specified with the '-F' and '-C' options is invoked.  When the
+command or function is invoked, the 'COMP_LINE', 'COMP_POINT',
+'COMP_KEY', and 'COMP_TYPE' variables are assigned values as described
+above (*note Bash Variables::).  If a shell function is being invoked,
+the 'COMP_WORDS' and 'COMP_CWORD' variables are also set.  When the
+function or command is invoked, the first argument ($1) is the name of
+the command whose arguments are being completed, the second argument
+($2) is the word being completed, and the third argument ($3) is the
+word preceding the word being completed on the current command line.  No
+filtering of the generated completions against the word being completed
+is performed; the function or command has complete freedom in generating
+the matches.
+
+   Any function specified with '-F' is invoked first.  The function may
+use any of the shell facilities, including the 'compgen' and 'compopt'
+builtins described below (*note Programmable Completion Builtins::), to
+generate the matches.  It must put the possible completions in the
+'COMPREPLY' array variable, one per array element.
+
+   Next, any command specified with the '-C' option is invoked in an
+environment equivalent to command substitution.  It should print a list
+of completions, one per line, to the standard output.  Backslash may be
+used to escape a newline, if necessary.
+
+   After all of the possible completions are generated, any filter
+specified with the '-X' option is applied to the list.  The filter is a
+pattern as used for pathname expansion; a '&' in the pattern is replaced
+with the text of the word being completed.  A literal '&' may be escaped
+with a backslash; the backslash is removed before attempting a match.
+Any completion that matches the pattern will be removed from the list.
+A leading '!' negates the pattern; in this case any completion not
+matching the pattern will be removed.  If the 'nocasematch' shell option
+(see the description of 'shopt' in *note The Shopt Builtin::) is
+enabled, the match is performed without regard to the case of alphabetic
+characters.
+
+   Finally, any prefix and suffix specified with the '-P' and '-S'
+options are added to each member of the completion list, and the result
+is returned to the Readline completion code as the list of possible
+completions.
+
+   If the previously-applied actions do not generate any matches, and
+the '-o dirnames' option was supplied to 'complete' when the compspec
+was defined, directory name completion is attempted.
+
+   If the '-o plusdirs' option was supplied to 'complete' when the
+compspec was defined, directory name completion is attempted and any
+matches are added to the results of the other actions.
+
+   By default, if a compspec is found, whatever it generates is returned
+to the completion code as the full set of possible completions.  The
+default Bash completions are not attempted, and the Readline default of
+filename completion is disabled.  If the '-o bashdefault' option was
+supplied to 'complete' when the compspec was defined, the default Bash
+completions are attempted if the compspec generates no matches.  If the
+'-o default' option was supplied to 'complete' when the compspec was
+defined, Readline's default completion will be performed if the compspec
+(and, if attempted, the default Bash completions) generate no matches.
+
+   When a compspec indicates that directory name completion is desired,
+the programmable completion functions force Readline to append a slash
+to completed names which are symbolic links to directories, subject to
+the value of the MARK-DIRECTORIES Readline variable, regardless of the
+setting of the MARK-SYMLINKED-DIRECTORIES Readline variable.
+
+   There is some support for dynamically modifying completions.  This is
+most useful when used in combination with a default completion specified
+with '-D'.  It's possible for shell functions executed as completion
+handlers to indicate that completion should be retried by returning an
+exit status of 124.  If a shell function returns 124, and changes the
+compspec associated with the command on which completion is being
+attempted (supplied as the first argument when the function is
+executed), programmable completion restarts from the beginning, with an
+attempt to find a new compspec for that command.  This allows a set of
+completions to be built dynamically as completion is attempted, rather
+than being loaded all at once.
+
+   For instance, assuming that there is a library of compspecs, each
+kept in a file corresponding to the name of the command, the following
+default completion function would load completions dynamically:
+
+     _completion_loader()
+     {
+         . "/etc/bash_completion.d/$1.sh" >/dev/null 2>&1 && return 124
+     }
+     complete -D -F _completion_loader -o bashdefault -o default
+
+
+File: bashref.info,  Node: Programmable Completion Builtins,  Next: A Programmable Completion Example,  Prev: Programmable Completion,  Up: Command Line Editing
+
+8.7 Programmable Completion Builtins
+====================================
+
+Three builtin commands are available to manipulate the programmable
+completion facilities: one to specify how the arguments to a particular
+command are to be completed, and two to modify the completion as it is
+happening.
+
+'compgen'
+          compgen [OPTION] [WORD]
+
+     Generate possible completion matches for WORD according to the
+     OPTIONs, which may be any option accepted by the 'complete' builtin
+     with the exception of '-p' and '-r', and write the matches to the
+     standard output.  When using the '-F' or '-C' options, the various
+     shell variables set by the programmable completion facilities,
+     while available, will not have useful values.
+
+     The matches will be generated in the same way as if the
+     programmable completion code had generated them directly from a
+     completion specification with the same flags.  If WORD is
+     specified, only those completions matching WORD will be displayed.
+
+     The return value is true unless an invalid option is supplied, or
+     no matches were generated.
+
+'complete'
+          complete [-abcdefgjksuv] [-o COMP-OPTION] [-DEI] [-A ACTION] [-G GLOBPAT]
+          [-W WORDLIST] [-F FUNCTION] [-C COMMAND] [-X FILTERPAT]
+          [-P PREFIX] [-S SUFFIX] NAME [NAME ...]
+          complete -pr [-DEI] [NAME ...]
+
+     Specify how arguments to each NAME should be completed.  If the
+     '-p' option is supplied, or if no options are supplied, existing
+     completion specifications are printed in a way that allows them to
+     be reused as input.  The '-r' option removes a completion
+     specification for each NAME, or, if no NAMEs are supplied, all
+     completion specifications.  The '-D' option indicates that other
+     supplied options and actions should apply to the "default" command
+     completion; that is, completion attempted on a command for which no
+     completion has previously been defined.  The '-E' option indicates
+     that other supplied options and actions should apply to "empty"
+     command completion; that is, completion attempted on a blank line.
+     The '-I' option indicates that other supplied options and actions
+     should apply to completion on the initial non-assignment word on
+     the line, or after a command delimiter such as ';' or '|', which is
+     usually command name completion.  If multiple options are supplied,
+     the '-D' option takes precedence over '-E', and both take
+     precedence over '-I'.  If any of '-D', '-E', or '-I' are supplied,
+     any other NAME arguments are ignored; these completions only apply
+     to the case specified by the option.
+
+     The process of applying these completion specifications when word
+     completion is attempted is described above (*note Programmable
+     Completion::).
+
+     Other options, if specified, have the following meanings.  The
+     arguments to the '-G', '-W', and '-X' options (and, if necessary,
+     the '-P' and '-S' options) should be quoted to protect them from
+     expansion before the 'complete' builtin is invoked.
+
+     '-o COMP-OPTION'
+          The COMP-OPTION controls several aspects of the compspec's
+          behavior beyond the simple generation of completions.
+          COMP-OPTION may be one of:
+
+          'bashdefault'
+               Perform the rest of the default Bash completions if the
+               compspec generates no matches.
+
+          'default'
+               Use Readline's default filename completion if the
+               compspec generates no matches.
+
+          'dirnames'
+               Perform directory name completion if the compspec
+               generates no matches.
+
+          'filenames'
+               Tell Readline that the compspec generates filenames, so
+               it can perform any filename-specific processing (like
+               adding a slash to directory names, quoting special
+               characters, or suppressing trailing spaces).  This option
+               is intended to be used with shell functions specified
+               with '-F'.
+
+          'noquote'
+               Tell Readline not to quote the completed words if they
+               are filenames (quoting filenames is the default).
+
+          'nosort'
+               Tell Readline not to sort the list of possible
+               completions alphabetically.
+
+          'nospace'
+               Tell Readline not to append a space (the default) to
+               words completed at the end of the line.
+
+          'plusdirs'
+               After any matches defined by the compspec are generated,
+               directory name completion is attempted and any matches
+               are added to the results of the other actions.
+
+     '-A ACTION'
+          The ACTION may be one of the following to generate a list of
+          possible completions:
+
+          'alias'
+               Alias names.  May also be specified as '-a'.
+
+          'arrayvar'
+               Array variable names.
+
+          'binding'
+               Readline key binding names (*note Bindable Readline
+               Commands::).
+
+          'builtin'
+               Names of shell builtin commands.  May also be specified
+               as '-b'.
+
+          'command'
+               Command names.  May also be specified as '-c'.
+
+          'directory'
+               Directory names.  May also be specified as '-d'.
+
+          'disabled'
+               Names of disabled shell builtins.
+
+          'enabled'
+               Names of enabled shell builtins.
+
+          'export'
+               Names of exported shell variables.  May also be specified
+               as '-e'.
+
+          'file'
+               File names.  May also be specified as '-f'.
+
+          'function'
+               Names of shell functions.
+
+          'group'
+               Group names.  May also be specified as '-g'.
+
+          'helptopic'
+               Help topics as accepted by the 'help' builtin (*note Bash
+               Builtins::).
+
+          'hostname'
+               Hostnames, as taken from the file specified by the
+               'HOSTFILE' shell variable (*note Bash Variables::).
+
+          'job'
+               Job names, if job control is active.  May also be
+               specified as '-j'.
+
+          'keyword'
+               Shell reserved words.  May also be specified as '-k'.
+
+          'running'
+               Names of running jobs, if job control is active.
+
+          'service'
+               Service names.  May also be specified as '-s'.
+
+          'setopt'
+               Valid arguments for the '-o' option to the 'set' builtin
+               (*note The Set Builtin::).
+
+          'shopt'
+               Shell option names as accepted by the 'shopt' builtin
+               (*note Bash Builtins::).
+
+          'signal'
+               Signal names.
+
+          'stopped'
+               Names of stopped jobs, if job control is active.
+
+          'user'
+               User names.  May also be specified as '-u'.
+
+          'variable'
+               Names of all shell variables.  May also be specified as
+               '-v'.
+
+     '-C COMMAND'
+          COMMAND is executed in a subshell environment, and its output
+          is used as the possible completions.
+
+     '-F FUNCTION'
+          The shell function FUNCTION is executed in the current shell
+          environment.  When it is executed, $1 is the name of the
+          command whose arguments are being completed, $2 is the word
+          being completed, and $3 is the word preceding the word being
+          completed, as described above (*note Programmable
+          Completion::).  When it finishes, the possible completions are
+          retrieved from the value of the 'COMPREPLY' array variable.
+
+     '-G GLOBPAT'
+          The filename expansion pattern GLOBPAT is expanded to generate
+          the possible completions.
+
+     '-P PREFIX'
+          PREFIX is added at the beginning of each possible completion
+          after all other options have been applied.
+
+     '-S SUFFIX'
+          SUFFIX is appended to each possible completion after all other
+          options have been applied.
+
+     '-W WORDLIST'
+          The WORDLIST is split using the characters in the 'IFS'
+          special variable as delimiters, and each resultant word is
+          expanded.  The possible completions are the members of the
+          resultant list which match the word being completed.
+
+     '-X FILTERPAT'
+          FILTERPAT is a pattern as used for filename expansion.  It is
+          applied to the list of possible completions generated by the
+          preceding options and arguments, and each completion matching
+          FILTERPAT is removed from the list.  A leading '!' in
+          FILTERPAT negates the pattern; in this case, any completion
+          not matching FILTERPAT is removed.
+
+     The return value is true unless an invalid option is supplied, an
+     option other than '-p' or '-r' is supplied without a NAME argument,
+     an attempt is made to remove a completion specification for a NAME
+     for which no specification exists, or an error occurs adding a
+     completion specification.
+
+'compopt'
+          compopt [-o OPTION] [-DEI] [+o OPTION] [NAME]
+     Modify completion options for each NAME according to the OPTIONs,
+     or for the currently-executing completion if no NAMEs are supplied.
+     If no OPTIONs are given, display the completion options for each
+     NAME or the current completion.  The possible values of OPTION are
+     those valid for the 'complete' builtin described above.  The '-D'
+     option indicates that other supplied options should apply to the
+     "default" command completion; that is, completion attempted on a
+     command for which no completion has previously been defined.  The
+     '-E' option indicates that other supplied options should apply to
+     "empty" command completion; that is, completion attempted on a
+     blank line.  The '-I' option indicates that other supplied options
+     should apply to completion on the initial non-assignment word on
+     the line, or after a command delimiter such as ';' or '|', which is
+     usually command name completion.
+
+     If multiple options are supplied, the '-D' option takes precedence
+     over '-E', and both take precedence over '-I'
+
+     The return value is true unless an invalid option is supplied, an
+     attempt is made to modify the options for a NAME for which no
+     completion specification exists, or an output error occurs.
+
+
+File: bashref.info,  Node: A Programmable Completion Example,  Prev: Programmable Completion Builtins,  Up: Command Line Editing
+
+8.8 A Programmable Completion Example
+=====================================
+
+The most common way to obtain additional completion functionality beyond
+the default actions 'complete' and 'compgen' provide is to use a shell
+function and bind it to a particular command using 'complete -F'.
+
+   The following function provides completions for the 'cd' builtin.  It
+is a reasonably good example of what shell functions must do when used
+for completion.  This function uses the word passed as '$2' to determine
+the directory name to complete.  You can also use the 'COMP_WORDS' array
+variable; the current word is indexed by the 'COMP_CWORD' variable.
+
+   The function relies on the 'complete' and 'compgen' builtins to do
+much of the work, adding only the things that the Bash 'cd' does beyond
+accepting basic directory names: tilde expansion (*note Tilde
+Expansion::), searching directories in $CDPATH, which is described above
+(*note Bourne Shell Builtins::), and basic support for the 'cdable_vars'
+shell option (*note The Shopt Builtin::).  '_comp_cd' modifies the value
+of IFS so that it contains only a newline to accommodate file names
+containing spaces and tabs - 'compgen' prints the possible completions
+it generates one per line.
+
+   Possible completions go into the COMPREPLY array variable, one
+completion per array element.  The programmable completion system
+retrieves the completions from there when the function returns.
+
+     # A completion function for the cd builtin
+     # based on the cd completion function from the bash_completion package
+     _comp_cd()
+     {
+         local IFS=$' \t\n'    # normalize IFS
+         local cur _skipdot _cdpath
+         local i j k
+
+         # Tilde expansion, which also expands tilde to full pathname
+         case "$2" in
+         \~*)    eval cur="$2" ;;
+         *)      cur=$2 ;;
+         esac
+
+         # no cdpath or absolute pathname -- straight directory completion
+         if [[ -z "${CDPATH:-}" ]] || [[ "$cur" == @(./*|../*|/*) ]]; then
+             # compgen prints paths one per line; could also use while loop
+             IFS=$'\n'
+             COMPREPLY=( $(compgen -d -- "$cur") )
+             IFS=$' \t\n'
+         # CDPATH+directories in the current directory if not in CDPATH
+         else
+             IFS=$'\n'
+             _skipdot=false
+             # preprocess CDPATH to convert null directory names to .
+             _cdpath=${CDPATH/#:/.:}
+             _cdpath=${_cdpath//::/:.:}
+             _cdpath=${_cdpath/%:/:.}
+             for i in ${_cdpath//:/$'\n'}; do
+                 if [[ $i -ef . ]]; then _skipdot=true; fi
+                 k="${#COMPREPLY[@]}"
+                 for j in $( compgen -d -- "$i/$cur" ); do
+                     COMPREPLY[k++]=${j#$i/}        # cut off directory
+                 done
+             done
+             $_skipdot || COMPREPLY+=( $(compgen -d -- "$cur") )
+             IFS=$' \t\n'
+         fi
+
+         # variable names if appropriate shell option set and no completions
+         if shopt -q cdable_vars && [[ ${#COMPREPLY[@]} -eq 0 ]]; then
+             COMPREPLY=( $(compgen -v -- "$cur") )
+         fi
+
+         return 0
+     }
+
+   We install the completion function using the '-F' option to
+'complete':
+
+     # Tell readline to quote appropriate and append slashes to directories;
+     # use the bash default completion for other arguments
+     complete -o filenames -o nospace -o bashdefault -F _comp_cd cd
+
+Since we'd like Bash and Readline to take care of some of the other
+details for us, we use several other options to tell Bash and Readline
+what to do.  The '-o filenames' option tells Readline that the possible
+completions should be treated as filenames, and quoted appropriately.
+That option will also cause Readline to append a slash to filenames it
+can determine are directories (which is why we might want to extend
+'_comp_cd' to append a slash if we're using directories found via
+CDPATH: Readline can't tell those completions are directories).  The '-o
+nospace' option tells Readline to not append a space character to the
+directory name, in case we want to append to it.  The '-o bashdefault'
+option brings in the rest of the "Bash default" completions - possible
+completion that Bash adds to the default Readline set.  These include
+things like command name completion, variable completion for words
+beginning with '$' or '${', completions containing pathname expansion
+patterns (*note Filename Expansion::), and so on.
+
+   Once installed using 'complete', '_comp_cd' will be called every time
+we attempt word completion for a 'cd' command.
+
+   Many more examples - an extensive collection of completions for most
+of the common GNU, Unix, and Linux commands - are available as part of
+the bash_completion project.  This is installed by default on many
+GNU/Linux distributions.  Originally written by Ian Macdonald, the
+project now lives at <https://github.com/scop/bash-completion/>.  There
+are ports for other systems such as Solaris and Mac OS X.
+
+   An older version of the bash_completion package is distributed with
+bash in the 'examples/complete' subdirectory.
+
+
+File: bashref.info,  Node: Using History Interactively,  Next: Installing Bash,  Prev: Command Line Editing,  Up: Top
+
+9 Using History Interactively
+*****************************
+
+This chapter describes how to use the GNU History Library interactively,
+from a user's standpoint.  It should be considered a user's guide.  For
+information on using the GNU History Library in other programs, see the
+GNU Readline Library Manual.
+
+* Menu:
+
+* Bash History Facilities::	How Bash lets you manipulate your command
+				history.
+* Bash History Builtins::	The Bash builtin commands that manipulate
+				the command history.
+* History Interaction::		What it feels like using History as a user.
+
+
+File: bashref.info,  Node: Bash History Facilities,  Next: Bash History Builtins,  Up: Using History Interactively
+
+9.1 Bash History Facilities
+===========================
+
+When the '-o history' option to the 'set' builtin is enabled (*note The
+Set Builtin::), the shell provides access to the "command history", the
+list of commands previously typed.  The value of the 'HISTSIZE' shell
+variable is used as the number of commands to save in a history list.
+The text of the last '$HISTSIZE' commands (default 500) is saved.  The
+shell stores each command in the history list prior to parameter and
+variable expansion but after history expansion is performed, subject to
+the values of the shell variables 'HISTIGNORE' and 'HISTCONTROL'.
+
+   When the shell starts up, the history is initialized from the file
+named by the 'HISTFILE' variable (default '~/.bash_history').  The file
+named by the value of 'HISTFILE' is truncated, if necessary, to contain
+no more than the number of lines specified by the value of the
+'HISTFILESIZE' variable.  When a shell with history enabled exits, the
+last '$HISTSIZE' lines are copied from the history list to the file
+named by '$HISTFILE'.  If the 'histappend' shell option is set (*note
+Bash Builtins::), the lines are appended to the history file, otherwise
+the history file is overwritten.  If 'HISTFILE' is unset, or if the
+history file is unwritable, the history is not saved.  After saving the
+history, the history file is truncated to contain no more than
+'$HISTFILESIZE' lines.  If 'HISTFILESIZE' is unset, or set to null, a
+non-numeric value, or a numeric value less than zero, the history file
+is not truncated.
+
+   If the 'HISTTIMEFORMAT' is set, the time stamp information associated
+with each history entry is written to the history file, marked with the
+history comment character.  When the history file is read, lines
+beginning with the history comment character followed immediately by a
+digit are interpreted as timestamps for the following history entry.
+
+   The builtin command 'fc' may be used to list or edit and re-execute a
+portion of the history list.  The 'history' builtin may be used to
+display or modify the history list and manipulate the history file.
+When using command-line editing, search commands are available in each
+editing mode that provide access to the history list (*note Commands For
+History::).
+
+   The shell allows control over which commands are saved on the history
+list.  The 'HISTCONTROL' and 'HISTIGNORE' variables may be set to cause
+the shell to save only a subset of the commands entered.  The 'cmdhist'
+shell option, if enabled, causes the shell to attempt to save each line
+of a multi-line command in the same history entry, adding semicolons
+where necessary to preserve syntactic correctness.  The 'lithist' shell
+option causes the shell to save the command with embedded newlines
+instead of semicolons.  The 'shopt' builtin is used to set these
+options.  *Note The Shopt Builtin::, for a description of 'shopt'.
+
+
+File: bashref.info,  Node: Bash History Builtins,  Next: History Interaction,  Prev: Bash History Facilities,  Up: Using History Interactively
+
+9.2 Bash History Builtins
+=========================
+
+Bash provides two builtin commands which manipulate the history list and
+history file.
+
+'fc'
+          fc [-e ENAME] [-lnr] [FIRST] [LAST]
+          fc -s [PAT=REP] [COMMAND]
+
+     The first form selects a range of commands from FIRST to LAST from
+     the history list and displays or edits and re-executes them.  Both
+     FIRST and LAST may be specified as a string (to locate the most
+     recent command beginning with that string) or as a number (an index
+     into the history list, where a negative number is used as an offset
+     from the current command number).
+
+     When listing, a FIRST or LAST of 0 is equivalent to -1 and -0 is
+     equivalent to the current command (usually the 'fc' command);
+     otherwise 0 is equivalent to -1 and -0 is invalid.
+
+     If LAST is not specified, it is set to FIRST.  If FIRST is not
+     specified, it is set to the previous command for editing and -16
+     for listing.  If the '-l' flag is given, the commands are listed on
+     standard output.  The '-n' flag suppresses the command numbers when
+     listing.  The '-r' flag reverses the order of the listing.
+     Otherwise, the editor given by ENAME is invoked on a file
+     containing those commands.  If ENAME is not given, the value of the
+     following variable expansion is used: '${FCEDIT:-${EDITOR:-vi}}'.
+     This says to use the value of the 'FCEDIT' variable if set, or the
+     value of the 'EDITOR' variable if that is set, or 'vi' if neither
+     is set.  When editing is complete, the edited commands are echoed
+     and executed.
+
+     In the second form, COMMAND is re-executed after each instance of
+     PAT in the selected command is replaced by REP.  COMMAND is
+     interpreted the same as FIRST above.
+
+     A useful alias to use with the 'fc' command is 'r='fc -s'', so that
+     typing 'r cc' runs the last command beginning with 'cc' and typing
+     'r' re-executes the last command (*note Aliases::).
+
+'history'
+          history [N]
+          history -c
+          history -d OFFSET
+          history -d START-END
+          history [-anrw] [FILENAME]
+          history -ps ARG
+
+     With no options, display the history list with line numbers.  Lines
+     prefixed with a '*' have been modified.  An argument of N lists
+     only the last N lines.  If the shell variable 'HISTTIMEFORMAT' is
+     set and not null, it is used as a format string for STRFTIME to
+     display the time stamp associated with each displayed history
+     entry.  No intervening blank is printed between the formatted time
+     stamp and the history line.
+
+     Options, if supplied, have the following meanings:
+
+     '-c'
+          Clear the history list.  This may be combined with the other
+          options to replace the history list completely.
+
+     '-d OFFSET'
+          Delete the history entry at position OFFSET.  If OFFSET is
+          positive, it should be specified as it appears when the
+          history is displayed.  If OFFSET is negative, it is
+          interpreted as relative to one greater than the last history
+          position, so negative indices count back from the end of the
+          history, and an index of '-1' refers to the current 'history
+          -d' command.
+
+     '-d START-END'
+          Delete the history entries between positions START and END,
+          inclusive.  Positive and negative values for START and END are
+          interpreted as described above.
+
+     '-a'
+          Append the new history lines to the history file.  These are
+          history lines entered since the beginning of the current Bash
+          session, but not already appended to the history file.
+
+     '-n'
+          Append the history lines not already read from the history
+          file to the current history list.  These are lines appended to
+          the history file since the beginning of the current Bash
+          session.
+
+     '-r'
+          Read the history file and append its contents to the history
+          list.
+
+     '-w'
+          Write out the current history list to the history file.
+
+     '-p'
+          Perform history substitution on the ARGs and display the
+          result on the standard output, without storing the results in
+          the history list.
+
+     '-s'
+          The ARGs are added to the end of the history list as a single
+          entry.
+
+     When any of the '-w', '-r', '-a', or '-n' options is used, if
+     FILENAME is given, then it is used as the history file.  If not,
+     then the value of the 'HISTFILE' variable is used.
+
+
+File: bashref.info,  Node: History Interaction,  Prev: Bash History Builtins,  Up: Using History Interactively
+
+9.3 History Expansion
+=====================
+
+The History library provides a history expansion feature that is similar
+to the history expansion provided by 'csh'.  This section describes the
+syntax used to manipulate the history information.
+
+   History expansions introduce words from the history list into the
+input stream, making it easy to repeat commands, insert the arguments to
+a previous command into the current input line, or fix errors in
+previous commands quickly.
+
+   History expansion is performed immediately after a complete line is
+read, before the shell breaks it into words, and is performed on each
+line individually.  Bash attempts to inform the history expansion
+functions about quoting still in effect from previous lines.
+
+   History expansion takes place in two parts.  The first is to
+determine which line from the history list should be used during
+substitution.  The second is to select portions of that line for
+inclusion into the current one.  The line selected from the history is
+called the "event", and the portions of that line that are acted upon
+are called "words".  Various "modifiers" are available to manipulate the
+selected words.  The line is broken into words in the same fashion that
+Bash does, so that several words surrounded by quotes are considered one
+word.  History expansions are introduced by the appearance of the
+history expansion character, which is '!' by default.
+
+   History expansion implements shell-like quoting conventions: a
+backslash can be used to remove the special handling for the next
+character; single quotes enclose verbatim sequences of characters, and
+can be used to inhibit history expansion; and characters enclosed within
+double quotes may be subject to history expansion, since backslash can
+escape the history expansion character, but single quotes may not, since
+they are not treated specially within double quotes.
+
+   When using the shell, only '\' and ''' may be used to escape the
+history expansion character, but the history expansion character is also
+treated as quoted if it immediately precedes the closing double quote in
+a double-quoted string.
+
+   Several shell options settable with the 'shopt' builtin (*note The
+Shopt Builtin::) may be used to tailor the behavior of history
+expansion.  If the 'histverify' shell option is enabled, and Readline is
+being used, history substitutions are not immediately passed to the
+shell parser.  Instead, the expanded line is reloaded into the Readline
+editing buffer for further modification.  If Readline is being used, and
+the 'histreedit' shell option is enabled, a failed history expansion
+will be reloaded into the Readline editing buffer for correction.  The
+'-p' option to the 'history' builtin command may be used to see what a
+history expansion will do before using it.  The '-s' option to the
+'history' builtin may be used to add commands to the end of the history
+list without actually executing them, so that they are available for
+subsequent recall.  This is most useful in conjunction with Readline.
+
+   The shell allows control of the various characters used by the
+history expansion mechanism with the 'histchars' variable, as explained
+above (*note Bash Variables::).  The shell uses the history comment
+character to mark history timestamps when writing the history file.
+
+* Menu:
+
+* Event Designators::	How to specify which history line to use.
+* Word Designators::	Specifying which words are of interest.
+* Modifiers::		Modifying the results of substitution.
+
+
+File: bashref.info,  Node: Event Designators,  Next: Word Designators,  Up: History Interaction
+
+9.3.1 Event Designators
+-----------------------
+
+An event designator is a reference to a command line entry in the
+history list.  Unless the reference is absolute, events are relative to
+the current position in the history list.
+
+'!'
+     Start a history substitution, except when followed by a space, tab,
+     the end of the line, '=' or '(' (when the 'extglob' shell option is
+     enabled using the 'shopt' builtin).
+
+'!N'
+     Refer to command line N.
+
+'!-N'
+     Refer to the command N lines back.
+
+'!!'
+     Refer to the previous command.  This is a synonym for '!-1'.
+
+'!STRING'
+     Refer to the most recent command preceding the current position in
+     the history list starting with STRING.
+
+'!?STRING[?]'
+     Refer to the most recent command preceding the current position in
+     the history list containing STRING.  The trailing '?' may be
+     omitted if the STRING is followed immediately by a newline.  If
+     STRING is missing, the string from the most recent search is used;
+     it is an error if there is no previous search string.
+
+'^STRING1^STRING2^'
+     Quick Substitution.  Repeat the last command, replacing STRING1
+     with STRING2.  Equivalent to '!!:s^STRING1^STRING2^'.
+
+'!#'
+     The entire command line typed so far.
+
+
+File: bashref.info,  Node: Word Designators,  Next: Modifiers,  Prev: Event Designators,  Up: History Interaction
+
+9.3.2 Word Designators
+----------------------
+
+Word designators are used to select desired words from the event.  A ':'
+separates the event specification from the word designator.  It may be
+omitted if the word designator begins with a '^', '$', '*', '-', or '%'.
+Words are numbered from the beginning of the line, with the first word
+being denoted by 0 (zero).  Words are inserted into the current line
+separated by single spaces.
+
+   For example,
+
+'!!'
+     designates the preceding command.  When you type this, the
+     preceding command is repeated in toto.
+
+'!!:$'
+     designates the last argument of the preceding command.  This may be
+     shortened to '!$'.
+
+'!fi:2'
+     designates the second argument of the most recent command starting
+     with the letters 'fi'.
+
+   Here are the word designators:
+
+'0 (zero)'
+     The '0'th word.  For many applications, this is the command word.
+
+'N'
+     The Nth word.
+
+'^'
+     The first argument; that is, word 1.
+
+'$'
+     The last argument.
+
+'%'
+     The first word matched by the most recent '?STRING?' search, if the
+     search string begins with a character that is part of a word.
+
+'X-Y'
+     A range of words; '-Y' abbreviates '0-Y'.
+
+'*'
+     All of the words, except the '0'th.  This is a synonym for '1-$'.
+     It is not an error to use '*' if there is just one word in the
+     event; the empty string is returned in that case.
+
+'X*'
+     Abbreviates 'X-$'
+
+'X-'
+     Abbreviates 'X-$' like 'X*', but omits the last word.  If 'x' is
+     missing, it defaults to 0.
+
+   If a word designator is supplied without an event specification, the
+previous command is used as the event.
+
+
+File: bashref.info,  Node: Modifiers,  Prev: Word Designators,  Up: History Interaction
+
+9.3.3 Modifiers
+---------------
+
+After the optional word designator, you can add a sequence of one or
+more of the following modifiers, each preceded by a ':'.  These modify,
+or edit, the word or words selected from the history event.
+
+'h'
+     Remove a trailing pathname component, leaving only the head.
+
+'t'
+     Remove all leading pathname components, leaving the tail.
+
+'r'
+     Remove a trailing suffix of the form '.SUFFIX', leaving the
+     basename.
+
+'e'
+     Remove all but the trailing suffix.
+
+'p'
+     Print the new command but do not execute it.
+
+'q'
+     Quote the substituted words, escaping further substitutions.
+
+'x'
+     Quote the substituted words as with 'q', but break into words at
+     spaces, tabs, and newlines.  The 'q' and 'x' modifiers are mutually
+     exclusive; the last one supplied is used.
+
+'s/OLD/NEW/'
+     Substitute NEW for the first occurrence of OLD in the event line.
+     Any character may be used as the delimiter in place of '/'.  The
+     delimiter may be quoted in OLD and NEW with a single backslash.  If
+     '&' appears in NEW, it is replaced by OLD.  A single backslash will
+     quote the '&'.  If OLD is null, it is set to the last OLD
+     substituted, or, if no previous history substitutions took place,
+     the last STRING in a !?STRING'[?]' search.  If NEW is is null, each
+     matching OLD is deleted.  The final delimiter is optional if it is
+     the last character on the input line.
+
+'&'
+     Repeat the previous substitution.
+
+'g'
+'a'
+     Cause changes to be applied over the entire event line.  Used in
+     conjunction with 's', as in 'gs/OLD/NEW/', or with '&'.
+
+'G'
+     Apply the following 's' or '&' modifier once to each word in the
+     event.
+
+
+File: bashref.info,  Node: Installing Bash,  Next: Reporting Bugs,  Prev: Using History Interactively,  Up: Top
+
+10 Installing Bash
+******************
+
+This chapter provides basic instructions for installing Bash on the
+various supported platforms.  The distribution supports the GNU
+operating systems, nearly every version of Unix, and several non-Unix
+systems such as BeOS and Interix.  Other independent ports exist for
+MS-DOS, OS/2, and Windows platforms.
+
+* Menu:
+
+* Basic Installation::	Installation instructions.
+* Compilers and Options::	How to set special options for various
+				systems.
+* Compiling For Multiple Architectures::	How to compile Bash for more
+						than one kind of system from
+						the same source tree.
+* Installation Names::	How to set the various paths used by the installation.
+* Specifying the System Type::	How to configure Bash for a particular system.
+* Sharing Defaults::	How to share default configuration values among GNU
+			programs.
+* Operation Controls::	Options recognized by the configuration program.
+* Optional Features::	How to enable and disable optional features when
+			building Bash.
+
+
+File: bashref.info,  Node: Basic Installation,  Next: Compilers and Options,  Up: Installing Bash
+
+10.1 Basic Installation
+=======================
+
+These are installation instructions for Bash.
+
+   The simplest way to compile Bash is:
+
+  1. 'cd' to the directory containing the source code and type
+     './configure' to configure Bash for your system.  If you're using
+     'csh' on an old version of System V, you might need to type 'sh
+     ./configure' instead to prevent 'csh' from trying to execute
+     'configure' itself.
+
+     Running 'configure' takes some time.  While running, it prints
+     messages telling which features it is checking for.
+
+  2. Type 'make' to compile Bash and build the 'bashbug' bug reporting
+     script.
+
+  3. Optionally, type 'make tests' to run the Bash test suite.
+
+  4. Type 'make install' to install 'bash' and 'bashbug'.  This will
+     also install the manual pages and Info file.
+
+   The 'configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a 'Makefile' in each directory of the package
+(the top directory, the 'builtins', 'doc', and 'support' directories,
+each directory under 'lib', and several others).  It also creates a
+'config.h' file containing system-dependent definitions.  Finally, it
+creates a shell script named 'config.status' that you can run in the
+future to recreate the current configuration, a file 'config.cache' that
+saves the results of its tests to speed up reconfiguring, and a file
+'config.log' containing compiler output (useful mainly for debugging
+'configure').  If at some point 'config.cache' contains results you
+don't want to keep, you may remove or edit it.
+
+   To find out more about the options and arguments that the 'configure'
+script understands, type
+
+     bash-4.2$ ./configure --help
+
+at the Bash prompt in your Bash source directory.
+
+   If you want to build Bash in a directory separate from the source
+directory - to build for multiple architectures, for example - just use
+the full path to the configure script.  The following commands will
+build bash in a directory under '/usr/local/build' from the source code
+in '/usr/local/src/bash-4.4':
+
+     mkdir /usr/local/build/bash-4.4
+     cd /usr/local/build/bash-4.4
+     bash /usr/local/src/bash-4.4/configure
+     make
+
+   See *note Compiling For Multiple Architectures:: for more information
+about building in a directory separate from the source.
+
+   If you need to do unusual things to compile Bash, please try to
+figure out how 'configure' could check whether or not to do them, and
+mail diffs or instructions to <bash-maintainers@gnu.org> so they can be
+considered for the next release.
+
+   The file 'configure.ac' is used to create 'configure' by a program
+called Autoconf.  You only need 'configure.ac' if you want to change it
+or regenerate 'configure' using a newer version of Autoconf.  If you do
+this, make sure you are using Autoconf version 2.50 or newer.
+
+   You can remove the program binaries and object files from the source
+code directory by typing 'make clean'.  To also remove the files that
+'configure' created (so you can compile Bash for a different kind of
+computer), type 'make distclean'.
+
+
+File: bashref.info,  Node: Compilers and Options,  Next: Compiling For Multiple Architectures,  Prev: Basic Installation,  Up: Installing Bash
+
+10.2 Compilers and Options
+==========================
+
+Some systems require unusual options for compilation or linking that the
+'configure' script does not know about.  You can give 'configure'
+initial values for variables by setting them in the environment.  Using
+a Bourne-compatible shell, you can do that on the command line like
+this:
+
+     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+
+   On systems that have the 'env' program, you can do it like this:
+
+     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+
+   The configuration process uses GCC to build Bash if it is available.
+
+
+File: bashref.info,  Node: Compiling For Multiple Architectures,  Next: Installation Names,  Prev: Compilers and Options,  Up: Installing Bash
+
+10.3 Compiling For Multiple Architectures
+=========================================
+
+You can compile Bash for more than one kind of computer at the same
+time, by placing the object files for each architecture in their own
+directory.  To do this, you must use a version of 'make' that supports
+the 'VPATH' variable, such as GNU 'make'.  'cd' to the directory where
+you want the object files and executables to go and run the 'configure'
+script from the source directory (*note Basic Installation::).  You may
+need to supply the '--srcdir=PATH' argument to tell 'configure' where
+the source files are.  'configure' automatically checks for the source
+code in the directory that 'configure' is in and in '..'.
+
+   If you have to use a 'make' that does not supports the 'VPATH'
+variable, you can compile Bash for one architecture at a time in the
+source code directory.  After you have installed Bash for one
+architecture, use 'make distclean' before reconfiguring for another
+architecture.
+
+   Alternatively, if your system supports symbolic links, you can use
+the 'support/mkclone' script to create a build tree which has symbolic
+links back to each file in the source directory.  Here's an example that
+creates a build directory in the current directory from a source
+directory '/usr/gnu/src/bash-2.0':
+
+     bash /usr/gnu/src/bash-2.0/support/mkclone -s /usr/gnu/src/bash-2.0 .
+
+The 'mkclone' script requires Bash, so you must have already built Bash
+for at least one architecture before you can create build directories
+for other architectures.
+
+
+File: bashref.info,  Node: Installation Names,  Next: Specifying the System Type,  Prev: Compiling For Multiple Architectures,  Up: Installing Bash
+
+10.4 Installation Names
+=======================
+
+By default, 'make install' will install into '/usr/local/bin',
+'/usr/local/man', etc.  You can specify an installation prefix other
+than '/usr/local' by giving 'configure' the option '--prefix=PATH', or
+by specifying a value for the 'DESTDIR' 'make' variable when running
+'make install'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+give 'configure' the option '--exec-prefix=PATH', 'make install' will
+use PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+
+File: bashref.info,  Node: Specifying the System Type,  Next: Sharing Defaults,  Prev: Installation Names,  Up: Installing Bash
+
+10.5 Specifying the System Type
+===============================
+
+There may be some features 'configure' can not figure out automatically,
+but need to determine by the type of host Bash will run on.  Usually
+'configure' can figure that out, but if it prints a message saying it
+can not guess the host type, give it the '--host=TYPE' option.  'TYPE'
+can either be a short name for the system type, such as 'sun4', or a
+canonical name with three fields: 'CPU-COMPANY-SYSTEM' (e.g.,
+'i386-unknown-freebsd4.2').
+
+   See the file 'support/config.sub' for the possible values of each
+field.
+
+
+File: bashref.info,  Node: Sharing Defaults,  Next: Operation Controls,  Prev: Specifying the System Type,  Up: Installing Bash
+
+10.6 Sharing Defaults
+=====================
+
+If you want to set default values for 'configure' scripts to share, you
+can create a site shell script called 'config.site' that gives default
+values for variables like 'CC', 'cache_file', and 'prefix'.  'configure'
+looks for 'PREFIX/share/config.site' if it exists, then
+'PREFIX/etc/config.site' if it exists.  Or, you can set the
+'CONFIG_SITE' environment variable to the location of the site script.
+A warning: the Bash 'configure' looks for a site script, but not all
+'configure' scripts do.
+
+
+File: bashref.info,  Node: Operation Controls,  Next: Optional Features,  Prev: Sharing Defaults,  Up: Installing Bash
+
+10.7 Operation Controls
+=======================
+
+'configure' recognizes the following options to control how it operates.
+
+'--cache-file=FILE'
+     Use and save the results of the tests in FILE instead of
+     './config.cache'.  Set FILE to '/dev/null' to disable caching, for
+     debugging 'configure'.
+
+'--help'
+     Print a summary of the options to 'configure', and exit.
+
+'--quiet'
+'--silent'
+'-q'
+     Do not print messages saying which checks are being made.
+
+'--srcdir=DIR'
+     Look for the Bash source code in directory DIR.  Usually
+     'configure' can determine that directory automatically.
+
+'--version'
+     Print the version of Autoconf used to generate the 'configure'
+     script, and exit.
+
+   'configure' also accepts some other, not widely used, boilerplate
+options.  'configure --help' prints the complete list.
+
+
+File: bashref.info,  Node: Optional Features,  Prev: Operation Controls,  Up: Installing Bash
+
+10.8 Optional Features
+======================
+
+The Bash 'configure' has a number of '--enable-FEATURE' options, where
+FEATURE indicates an optional part of Bash.  There are also several
+'--with-PACKAGE' options, where PACKAGE is something like 'bash-malloc'
+or 'purify'.  To turn off the default use of a package, use
+'--without-PACKAGE'.  To configure Bash without a feature that is
+enabled by default, use '--disable-FEATURE'.
+
+   Here is a complete list of the '--enable-' and '--with-' options that
+the Bash 'configure' recognizes.
+
+'--with-afs'
+     Define if you are using the Andrew File System from Transarc.
+
+'--with-bash-malloc'
+     Use the Bash version of 'malloc' in the directory 'lib/malloc'.
+     This is not the same 'malloc' that appears in GNU libc, but an
+     older version originally derived from the 4.2 BSD 'malloc'.  This
+     'malloc' is very fast, but wastes some space on each allocation.
+     This option is enabled by default.  The 'NOTES' file contains a
+     list of systems for which this should be turned off, and
+     'configure' disables this option automatically for a number of
+     systems.
+
+'--with-curses'
+     Use the curses library instead of the termcap library.  This should
+     be supplied if your system has an inadequate or incomplete termcap
+     database.
+
+'--with-gnu-malloc'
+     A synonym for '--with-bash-malloc'.
+
+'--with-installed-readline[=PREFIX]'
+     Define this to make Bash link with a locally-installed version of
+     Readline rather than the version in 'lib/readline'.  This works
+     only with Readline 5.0 and later versions.  If PREFIX is 'yes' or
+     not supplied, 'configure' uses the values of the make variables
+     'includedir' and 'libdir', which are subdirectories of 'prefix' by
+     default, to find the installed version of Readline if it is not in
+     the standard system include and library directories.  If PREFIX is
+     'no', Bash links with the version in 'lib/readline'.  If PREFIX is
+     set to any other value, 'configure' treats it as a directory
+     pathname and looks for the installed version of Readline in
+     subdirectories of that directory (include files in PREFIX/'include'
+     and the library in PREFIX/'lib').
+
+'--with-purify'
+     Define this to use the Purify memory allocation checker from
+     Rational Software.
+
+'--enable-minimal-config'
+     This produces a shell with minimal features, close to the
+     historical Bourne shell.
+
+   There are several '--enable-' options that alter how Bash is compiled
+and linked, rather than changing run-time features.
+
+'--enable-largefile'
+     Enable support for large files
+     (http://www.unix.org/version2/whatsnew/lfs20mar.html) if the
+     operating system requires special compiler options to build
+     programs which can access large files.  This is enabled by default,
+     if the operating system provides large file support.
+
+'--enable-profiling'
+     This builds a Bash binary that produces profiling information to be
+     processed by 'gprof' each time it is executed.
+
+'--enable-static-link'
+     This causes Bash to be linked statically, if 'gcc' is being used.
+     This could be used to build a version to use as root's shell.
+
+   The 'minimal-config' option can be used to disable all of the
+following options, but it is processed first, so individual options may
+be enabled using 'enable-FEATURE'.
+
+   All of the following options except for 'disabled-builtins',
+'direxpand-default', and 'xpg-echo-default' are enabled by default,
+unless the operating system does not provide the necessary support.
+
+'--enable-alias'
+     Allow alias expansion and include the 'alias' and 'unalias'
+     builtins (*note Aliases::).
+
+'--enable-arith-for-command'
+     Include support for the alternate form of the 'for' command that
+     behaves like the C language 'for' statement (*note Looping
+     Constructs::).
+
+'--enable-array-variables'
+     Include support for one-dimensional array shell variables (*note
+     Arrays::).
+
+'--enable-bang-history'
+     Include support for 'csh'-like history substitution (*note History
+     Interaction::).
+
+'--enable-brace-expansion'
+     Include 'csh'-like brace expansion ( 'b{a,b}c' ==> 'bac bbc' ).
+     See *note Brace Expansion::, for a complete description.
+
+'--enable-casemod-attributes'
+     Include support for case-modifying attributes in the 'declare'
+     builtin and assignment statements.  Variables with the UPPERCASE
+     attribute, for example, will have their values converted to
+     uppercase upon assignment.
+
+'--enable-casemod-expansion'
+     Include support for case-modifying word expansions.
+
+'--enable-command-timing'
+     Include support for recognizing 'time' as a reserved word and for
+     displaying timing statistics for the pipeline following 'time'
+     (*note Pipelines::).  This allows pipelines as well as shell
+     builtins and functions to be timed.
+
+'--enable-cond-command'
+     Include support for the '[[' conditional command.  (*note
+     Conditional Constructs::).
+
+'--enable-cond-regexp'
+     Include support for matching POSIX regular expressions using the
+     '=~' binary operator in the '[[' conditional command.  (*note
+     Conditional Constructs::).
+
+'--enable-coprocesses'
+     Include support for coprocesses and the 'coproc' reserved word
+     (*note Pipelines::).
+
+'--enable-debugger'
+     Include support for the bash debugger (distributed separately).
+
+'--enable-dev-fd-stat-broken'
+     If calling 'stat' on /dev/fd/N returns different results than
+     calling 'fstat' on file descriptor N, supply this option to enable
+     a workaround.  This has implications for conditional commands that
+     test file attributes.
+
+'--enable-direxpand-default'
+     Cause the 'direxpand' shell option (*note The Shopt Builtin::) to
+     be enabled by default when the shell starts.  It is normally
+     disabled by default.
+
+'--enable-directory-stack'
+     Include support for a 'csh'-like directory stack and the 'pushd',
+     'popd', and 'dirs' builtins (*note The Directory Stack::).
+
+'--enable-disabled-builtins'
+     Allow builtin commands to be invoked via 'builtin xxx' even after
+     'xxx' has been disabled using 'enable -n xxx'.  See *note Bash
+     Builtins::, for details of the 'builtin' and 'enable' builtin
+     commands.
+
+'--enable-dparen-arithmetic'
+     Include support for the '((...))' command (*note Conditional
+     Constructs::).
+
+'--enable-extended-glob'
+     Include support for the extended pattern matching features
+     described above under *note Pattern Matching::.
+
+'--enable-extended-glob-default'
+     Set the default value of the EXTGLOB shell option described above
+     under *note The Shopt Builtin:: to be enabled.
+
+'--enable-function-import'
+     Include support for importing function definitions exported by
+     another instance of the shell from the environment.  This option is
+     enabled by default.
+
+'--enable-glob-asciirange-default'
+     Set the default value of the GLOBASCIIRANGES shell option described
+     above under *note The Shopt Builtin:: to be enabled.  This controls
+     the behavior of character ranges when used in pattern matching
+     bracket expressions.
+
+'--enable-help-builtin'
+     Include the 'help' builtin, which displays help on shell builtins
+     and variables (*note Bash Builtins::).
+
+'--enable-history'
+     Include command history and the 'fc' and 'history' builtin commands
+     (*note Bash History Facilities::).
+
+'--enable-job-control'
+     This enables the job control features (*note Job Control::), if the
+     operating system supports them.
+
+'--enable-multibyte'
+     This enables support for multibyte characters if the operating
+     system provides the necessary support.
+
+'--enable-net-redirections'
+     This enables the special handling of filenames of the form
+     '/dev/tcp/HOST/PORT' and '/dev/udp/HOST/PORT' when used in
+     redirections (*note Redirections::).
+
+'--enable-process-substitution'
+     This enables process substitution (*note Process Substitution::) if
+     the operating system provides the necessary support.
+
+'--enable-progcomp'
+     Enable the programmable completion facilities (*note Programmable
+     Completion::).  If Readline is not enabled, this option has no
+     effect.
+
+'--enable-prompt-string-decoding'
+     Turn on the interpretation of a number of backslash-escaped
+     characters in the '$PS0', '$PS1', '$PS2', and '$PS4' prompt
+     strings.  See *note Controlling the Prompt::, for a complete list
+     of prompt string escape sequences.
+
+'--enable-readline'
+     Include support for command-line editing and history with the Bash
+     version of the Readline library (*note Command Line Editing::).
+
+'--enable-restricted'
+     Include support for a "restricted shell".  If this is enabled,
+     Bash, when called as 'rbash', enters a restricted mode.  See *note
+     The Restricted Shell::, for a description of restricted mode.
+
+'--enable-select'
+     Include the 'select' compound command, which allows the generation
+     of simple menus (*note Conditional Constructs::).
+
+'--enable-separate-helpfiles'
+     Use external files for the documentation displayed by the 'help'
+     builtin instead of storing the text internally.
+
+'--enable-single-help-strings'
+     Store the text displayed by the 'help' builtin as a single string
+     for each help topic.  This aids in translating the text to
+     different languages.  You may need to disable this if your compiler
+     cannot handle very long string literals.
+
+'--enable-strict-posix-default'
+     Make Bash POSIX-conformant by default (*note Bash POSIX Mode::).
+
+'--enable-usg-echo-default'
+     A synonym for '--enable-xpg-echo-default'.
+
+'--enable-xpg-echo-default'
+     Make the 'echo' builtin expand backslash-escaped characters by
+     default, without requiring the '-e' option.  This sets the default
+     value of the 'xpg_echo' shell option to 'on', which makes the Bash
+     'echo' behave more like the version specified in the Single Unix
+     Specification, version 3.  *Note Bash Builtins::, for a description
+     of the escape sequences that 'echo' recognizes.
+
+   The file 'config-top.h' contains C Preprocessor '#define' statements
+for options which are not settable from 'configure'.  Some of these are
+not meant to be changed; beware of the consequences if you do.  Read the
+comments associated with each definition for more information about its
+effect.
+
+
+File: bashref.info,  Node: Reporting Bugs,  Next: Major Differences From The Bourne Shell,  Prev: Installing Bash,  Up: Top
+
+Appendix A Reporting Bugs
+*************************
+
+Please report all bugs you find in Bash.  But first, you should make
+sure that it really is a bug, and that it appears in the latest version
+of Bash.  The latest version of Bash is always available for FTP from
+<ftp://ftp.gnu.org/pub/gnu/bash/>.
+
+   Once you have determined that a bug actually exists, use the
+'bashbug' command to submit a bug report.  If you have a fix, you are
+encouraged to mail that as well!  Suggestions and 'philosophical' bug
+reports may be mailed to <bug-bash@gnu.org> or posted to the Usenet
+newsgroup 'gnu.bash.bug'.
+
+   All bug reports should include:
+   * The version number of Bash.
+   * The hardware and operating system.
+   * The compiler used to compile Bash.
+   * A description of the bug behaviour.
+   * A short script or 'recipe' which exercises the bug and may be used
+     to reproduce it.
+
+'bashbug' inserts the first three items automatically into the template
+it provides for filing a bug report.
+
+   Please send all reports concerning this manual to <bug-bash@gnu.org>.
+
+
+File: bashref.info,  Node: Major Differences From The Bourne Shell,  Next: GNU Free Documentation License,  Prev: Reporting Bugs,  Up: Top
+
+Appendix B Major Differences From The Bourne Shell
+**************************************************
+
+Bash implements essentially the same grammar, parameter and variable
+expansion, redirection, and quoting as the Bourne Shell.  Bash uses the
+POSIX standard as the specification of how these features are to be
+implemented.  There are some differences between the traditional Bourne
+shell and Bash; this section quickly details the differences of
+significance.  A number of these differences are explained in greater
+depth in previous sections.  This section uses the version of 'sh'
+included in SVR4.2 (the last version of the historical Bourne shell) as
+the baseline reference.
+
+   * Bash is POSIX-conformant, even where the POSIX specification
+     differs from traditional 'sh' behavior (*note Bash POSIX Mode::).
+
+   * Bash has multi-character invocation options (*note Invoking
+     Bash::).
+
+   * Bash has command-line editing (*note Command Line Editing::) and
+     the 'bind' builtin.
+
+   * Bash provides a programmable word completion mechanism (*note
+     Programmable Completion::), and builtin commands 'complete',
+     'compgen', and 'compopt', to manipulate it.
+
+   * Bash has command history (*note Bash History Facilities::) and the
+     'history' and 'fc' builtins to manipulate it.  The Bash history
+     list maintains timestamp information and uses the value of the
+     'HISTTIMEFORMAT' variable to display it.
+
+   * Bash implements 'csh'-like history expansion (*note History
+     Interaction::).
+
+   * Bash has one-dimensional array variables (*note Arrays::), and the
+     appropriate variable expansions and assignment syntax to use them.
+     Several of the Bash builtins take options to act on arrays.  Bash
+     provides a number of built-in array variables.
+
+   * The '$'...'' quoting syntax, which expands ANSI-C backslash-escaped
+     characters in the text between the single quotes, is supported
+     (*note ANSI-C Quoting::).
+
+   * Bash supports the '$"..."' quoting syntax to do locale-specific
+     translation of the characters between the double quotes.  The '-D',
+     '--dump-strings', and '--dump-po-strings' invocation options list
+     the translatable strings found in a script (*note Locale
+     Translation::).
+
+   * Bash implements the '!' keyword to negate the return value of a
+     pipeline (*note Pipelines::).  Very useful when an 'if' statement
+     needs to act only if a test fails.  The Bash '-o pipefail' option
+     to 'set' will cause a pipeline to return a failure status if any
+     command fails.
+
+   * Bash has the 'time' reserved word and command timing (*note
+     Pipelines::).  The display of the timing statistics may be
+     controlled with the 'TIMEFORMAT' variable.
+
+   * Bash implements the 'for (( EXPR1 ; EXPR2 ; EXPR3 ))' arithmetic
+     for command, similar to the C language (*note Looping
+     Constructs::).
+
+   * Bash includes the 'select' compound command, which allows the
+     generation of simple menus (*note Conditional Constructs::).
+
+   * Bash includes the '[[' compound command, which makes conditional
+     testing part of the shell grammar (*note Conditional Constructs::),
+     including optional regular expression matching.
+
+   * Bash provides optional case-insensitive matching for the 'case' and
+     '[[' constructs.
+
+   * Bash includes brace expansion (*note Brace Expansion::) and tilde
+     expansion (*note Tilde Expansion::).
+
+   * Bash implements command aliases and the 'alias' and 'unalias'
+     builtins (*note Aliases::).
+
+   * Bash provides shell arithmetic, the '((' compound command (*note
+     Conditional Constructs::), and arithmetic expansion (*note Shell
+     Arithmetic::).
+
+   * Variables present in the shell's initial environment are
+     automatically exported to child processes.  The Bourne shell does
+     not normally do this unless the variables are explicitly marked
+     using the 'export' command.
+
+   * Bash supports the '+=' assignment operator, which appends to the
+     value of the variable named on the left hand side.
+
+   * Bash includes the POSIX pattern removal '%', '#', '%%' and '##'
+     expansions to remove leading or trailing substrings from variable
+     values (*note Shell Parameter Expansion::).
+
+   * The expansion '${#xx}', which returns the length of '${xx}', is
+     supported (*note Shell Parameter Expansion::).
+
+   * The expansion '${var:'OFFSET'[:'LENGTH']}', which expands to the
+     substring of 'var''s value of length LENGTH, beginning at OFFSET,
+     is present (*note Shell Parameter Expansion::).
+
+   * The expansion '${var/[/]'PATTERN'[/'REPLACEMENT']}', which matches
+     PATTERN and replaces it with REPLACEMENT in the value of 'var', is
+     available (*note Shell Parameter Expansion::).
+
+   * The expansion '${!PREFIX*}' expansion, which expands to the names
+     of all shell variables whose names begin with PREFIX, is available
+     (*note Shell Parameter Expansion::).
+
+   * Bash has INDIRECT variable expansion using '${!word}' (*note Shell
+     Parameter Expansion::).
+
+   * Bash can expand positional parameters beyond '$9' using '${NUM}'.
+
+   * The POSIX '$()' form of command substitution is implemented (*note
+     Command Substitution::), and preferred to the Bourne shell's '``'
+     (which is also implemented for backwards compatibility).
+
+   * Bash has process substitution (*note Process Substitution::).
+
+   * Bash automatically assigns variables that provide information about
+     the current user ('UID', 'EUID', and 'GROUPS'), the current host
+     ('HOSTTYPE', 'OSTYPE', 'MACHTYPE', and 'HOSTNAME'), and the
+     instance of Bash that is running ('BASH', 'BASH_VERSION', and
+     'BASH_VERSINFO').  *Note Bash Variables::, for details.
+
+   * The 'IFS' variable is used to split only the results of expansion,
+     not all words (*note Word Splitting::).  This closes a longstanding
+     shell security hole.
+
+   * The filename expansion bracket expression code uses '!' and '^' to
+     negate the set of characters between the brackets.  The Bourne
+     shell uses only '!'.
+
+   * Bash implements the full set of POSIX filename expansion operators,
+     including CHARACTER CLASSES, EQUIVALENCE CLASSES, and COLLATING
+     SYMBOLS (*note Filename Expansion::).
+
+   * Bash implements extended pattern matching features when the
+     'extglob' shell option is enabled (*note Pattern Matching::).
+
+   * It is possible to have a variable and a function with the same
+     name; 'sh' does not separate the two name spaces.
+
+   * Bash functions are permitted to have local variables using the
+     'local' builtin, and thus useful recursive functions may be written
+     (*note Bash Builtins::).
+
+   * Variable assignments preceding commands affect only that command,
+     even builtins and functions (*note Environment::).  In 'sh', all
+     variable assignments preceding commands are global unless the
+     command is executed from the file system.
+
+   * Bash performs filename expansion on filenames specified as operands
+     to input and output redirection operators (*note Redirections::).
+
+   * Bash contains the '<>' redirection operator, allowing a file to be
+     opened for both reading and writing, and the '&>' redirection
+     operator, for directing standard output and standard error to the
+     same file (*note Redirections::).
+
+   * Bash includes the '<<<' redirection operator, allowing a string to
+     be used as the standard input to a command.
+
+   * Bash implements the '[n]<&WORD' and '[n]>&WORD' redirection
+     operators, which move one file descriptor to another.
+
+   * Bash treats a number of filenames specially when they are used in
+     redirection operators (*note Redirections::).
+
+   * Bash can open network connections to arbitrary machines and
+     services with the redirection operators (*note Redirections::).
+
+   * The 'noclobber' option is available to avoid overwriting existing
+     files with output redirection (*note The Set Builtin::).  The '>|'
+     redirection operator may be used to override 'noclobber'.
+
+   * The Bash 'cd' and 'pwd' builtins (*note Bourne Shell Builtins::)
+     each take '-L' and '-P' options to switch between logical and
+     physical modes.
+
+   * Bash allows a function to override a builtin with the same name,
+     and provides access to that builtin's functionality within the
+     function via the 'builtin' and 'command' builtins (*note Bash
+     Builtins::).
+
+   * The 'command' builtin allows selective disabling of functions when
+     command lookup is performed (*note Bash Builtins::).
+
+   * Individual builtins may be enabled or disabled using the 'enable'
+     builtin (*note Bash Builtins::).
+
+   * The Bash 'exec' builtin takes additional options that allow users
+     to control the contents of the environment passed to the executed
+     command, and what the zeroth argument to the command is to be
+     (*note Bourne Shell Builtins::).
+
+   * Shell functions may be exported to children via the environment
+     using 'export -f' (*note Shell Functions::).
+
+   * The Bash 'export', 'readonly', and 'declare' builtins can take a
+     '-f' option to act on shell functions, a '-p' option to display
+     variables with various attributes set in a format that can be used
+     as shell input, a '-n' option to remove various variable
+     attributes, and 'name=value' arguments to set variable attributes
+     and values simultaneously.
+
+   * The Bash 'hash' builtin allows a name to be associated with an
+     arbitrary filename, even when that filename cannot be found by
+     searching the '$PATH', using 'hash -p' (*note Bourne Shell
+     Builtins::).
+
+   * Bash includes a 'help' builtin for quick reference to shell
+     facilities (*note Bash Builtins::).
+
+   * The 'printf' builtin is available to display formatted output
+     (*note Bash Builtins::).
+
+   * The Bash 'read' builtin (*note Bash Builtins::) will read a line
+     ending in '\' with the '-r' option, and will use the 'REPLY'
+     variable as a default if no non-option arguments are supplied.  The
+     Bash 'read' builtin also accepts a prompt string with the '-p'
+     option and will use Readline to obtain the line when given the '-e'
+     option.  The 'read' builtin also has additional options to control
+     input: the '-s' option will turn off echoing of input characters as
+     they are read, the '-t' option will allow 'read' to time out if
+     input does not arrive within a specified number of seconds, the
+     '-n' option will allow reading only a specified number of
+     characters rather than a full line, and the '-d' option will read
+     until a particular character rather than newline.
+
+   * The 'return' builtin may be used to abort execution of scripts
+     executed with the '.' or 'source' builtins (*note Bourne Shell
+     Builtins::).
+
+   * Bash includes the 'shopt' builtin, for finer control of shell
+     optional capabilities (*note The Shopt Builtin::), and allows these
+     options to be set and unset at shell invocation (*note Invoking
+     Bash::).
+
+   * Bash has much more optional behavior controllable with the 'set'
+     builtin (*note The Set Builtin::).
+
+   * The '-x' ('xtrace') option displays commands other than simple
+     commands when performing an execution trace (*note The Set
+     Builtin::).
+
+   * The 'test' builtin (*note Bourne Shell Builtins::) is slightly
+     different, as it implements the POSIX algorithm, which specifies
+     the behavior based on the number of arguments.
+
+   * Bash includes the 'caller' builtin, which displays the context of
+     any active subroutine call (a shell function or a script executed
+     with the '.' or 'source' builtins).  This supports the bash
+     debugger.
+
+   * The 'trap' builtin (*note Bourne Shell Builtins::) allows a 'DEBUG'
+     pseudo-signal specification, similar to 'EXIT'.  Commands specified
+     with a 'DEBUG' trap are executed before every simple command, 'for'
+     command, 'case' command, 'select' command, every arithmetic 'for'
+     command, and before the first command executes in a shell function.
+     The 'DEBUG' trap is not inherited by shell functions unless the
+     function has been given the 'trace' attribute or the 'functrace'
+     option has been enabled using the 'shopt' builtin.  The 'extdebug'
+     shell option has additional effects on the 'DEBUG' trap.
+
+     The 'trap' builtin (*note Bourne Shell Builtins::) allows an 'ERR'
+     pseudo-signal specification, similar to 'EXIT' and 'DEBUG'.
+     Commands specified with an 'ERR' trap are executed after a simple
+     command fails, with a few exceptions.  The 'ERR' trap is not
+     inherited by shell functions unless the '-o errtrace' option to the
+     'set' builtin is enabled.
+
+     The 'trap' builtin (*note Bourne Shell Builtins::) allows a
+     'RETURN' pseudo-signal specification, similar to 'EXIT' and
+     'DEBUG'.  Commands specified with an 'RETURN' trap are executed
+     before execution resumes after a shell function or a shell script
+     executed with '.' or 'source' returns.  The 'RETURN' trap is not
+     inherited by shell functions unless the function has been given the
+     'trace' attribute or the 'functrace' option has been enabled using
+     the 'shopt' builtin.
+
+   * The Bash 'type' builtin is more extensive and gives more
+     information about the names it finds (*note Bash Builtins::).
+
+   * The Bash 'umask' builtin permits a '-p' option to cause the output
+     to be displayed in the form of a 'umask' command that may be reused
+     as input (*note Bourne Shell Builtins::).
+
+   * Bash implements a 'csh'-like directory stack, and provides the
+     'pushd', 'popd', and 'dirs' builtins to manipulate it (*note The
+     Directory Stack::).  Bash also makes the directory stack visible as
+     the value of the 'DIRSTACK' shell variable.
+
+   * Bash interprets special backslash-escaped characters in the prompt
+     strings when interactive (*note Controlling the Prompt::).
+
+   * The Bash restricted mode is more useful (*note The Restricted
+     Shell::); the SVR4.2 shell restricted mode is too limited.
+
+   * The 'disown' builtin can remove a job from the internal shell job
+     table (*note Job Control Builtins::) or suppress the sending of
+     'SIGHUP' to a job when the shell exits as the result of a 'SIGHUP'.
+
+   * Bash includes a number of features to support a separate debugger
+     for shell scripts.
+
+   * The SVR4.2 shell has two privilege-related builtins ('mldmode' and
+     'priv') not present in Bash.
+
+   * Bash does not have the 'stop' or 'newgrp' builtins.
+
+   * Bash does not use the 'SHACCT' variable or perform shell
+     accounting.
+
+   * The SVR4.2 'sh' uses a 'TIMEOUT' variable like Bash uses 'TMOUT'.
+
+More features unique to Bash may be found in *note Bash Features::.
+
+B.1 Implementation Differences From The SVR4.2 Shell
+====================================================
+
+Since Bash is a completely new implementation, it does not suffer from
+many of the limitations of the SVR4.2 shell.  For instance:
+
+   * Bash does not fork a subshell when redirecting into or out of a
+     shell control structure such as an 'if' or 'while' statement.
+
+   * Bash does not allow unbalanced quotes.  The SVR4.2 shell will
+     silently insert a needed closing quote at 'EOF' under certain
+     circumstances.  This can be the cause of some hard-to-find errors.
+
+   * The SVR4.2 shell uses a baroque memory management scheme based on
+     trapping 'SIGSEGV'.  If the shell is started from a process with
+     'SIGSEGV' blocked (e.g., by using the 'system()' C library function
+     call), it misbehaves badly.
+
+   * In a questionable attempt at security, the SVR4.2 shell, when
+     invoked without the '-p' option, will alter its real and effective
+     UID and GID if they are less than some magic threshold value,
+     commonly 100.  This can lead to unexpected results.
+
+   * The SVR4.2 shell does not allow users to trap 'SIGSEGV', 'SIGALRM',
+     or 'SIGCHLD'.
+
+   * The SVR4.2 shell does not allow the 'IFS', 'MAILCHECK', 'PATH',
+     'PS1', or 'PS2' variables to be unset.
+
+   * The SVR4.2 shell treats '^' as the undocumented equivalent of '|'.
+
+   * Bash allows multiple option arguments when it is invoked ('-x -v');
+     the SVR4.2 shell allows only one option argument ('-xv').  In fact,
+     some versions of the shell dump core if the second argument begins
+     with a '-'.
+
+   * The SVR4.2 shell exits a script if any builtin fails; Bash exits a
+     script only if one of the POSIX special builtins fails, and only
+     for certain failures, as enumerated in the POSIX standard.
+
+   * The SVR4.2 shell behaves differently when invoked as 'jsh' (it
+     turns on job control).
+
+
+File: bashref.info,  Node: GNU Free Documentation License,  Next: Indexes,  Prev: Major Differences From The Bourne Shell,  Up: Top
+
+Appendix C GNU Free Documentation License
+*****************************************
+
+                     Version 1.3, 3 November 2008
+
+     Copyright (C) 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc.
+     <http://fsf.org/>
+
+     Everyone is permitted to copy and distribute verbatim copies
+     of this license document, but changing it is not allowed.
+
+  0. PREAMBLE
+
+     The purpose of this License is to make a manual, textbook, or other
+     functional and useful document "free" in the sense of freedom: to
+     assure everyone the effective freedom to copy and redistribute it,
+     with or without modifying it, either commercially or
+     noncommercially.  Secondarily, this License preserves for the
+     author and publisher a way to get credit for their work, while not
+     being considered responsible for modifications made by others.
+
+     This License is a kind of "copyleft", which means that derivative
+     works of the document must themselves be free in the same sense.
+     It complements the GNU General Public License, which is a copyleft
+     license designed for free software.
+
+     We have designed this License in order to use it for manuals for
+     free software, because free software needs free documentation: a
+     free program should come with manuals providing the same freedoms
+     that the software does.  But this License is not limited to
+     software manuals; it can be used for any textual work, regardless
+     of subject matter or whether it is published as a printed book.  We
+     recommend this License principally for works whose purpose is
+     instruction or reference.
+
+  1. APPLICABILITY AND DEFINITIONS
+
+     This License applies to any manual or other work, in any medium,
+     that contains a notice placed by the copyright holder saying it can
+     be distributed under the terms of this License.  Such a notice
+     grants a world-wide, royalty-free license, unlimited in duration,
+     to use that work under the conditions stated herein.  The
+     "Document", below, refers to any such manual or work.  Any member
+     of the public is a licensee, and is addressed as "you".  You accept
+     the license if you copy, modify or distribute the work in a way
+     requiring permission under copyright law.
+
+     A "Modified Version" of the Document means any work containing the
+     Document or a portion of it, either copied verbatim, or with
+     modifications and/or translated into another language.
+
+     A "Secondary Section" is a named appendix or a front-matter section
+     of the Document that deals exclusively with the relationship of the
+     publishers or authors of the Document to the Document's overall
+     subject (or to related matters) and contains nothing that could
+     fall directly within that overall subject.  (Thus, if the Document
+     is in part a textbook of mathematics, a Secondary Section may not
+     explain any mathematics.)  The relationship could be a matter of
+     historical connection with the subject or with related matters, or
+     of legal, commercial, philosophical, ethical or political position
+     regarding them.
+
+     The "Invariant Sections" are certain Secondary Sections whose
+     titles are designated, as being those of Invariant Sections, in the
+     notice that says that the Document is released under this License.
+     If a section does not fit the above definition of Secondary then it
+     is not allowed to be designated as Invariant.  The Document may
+     contain zero Invariant Sections.  If the Document does not identify
+     any Invariant Sections then there are none.
+
+     The "Cover Texts" are certain short passages of text that are
+     listed, as Front-Cover Texts or Back-Cover Texts, in the notice
+     that says that the Document is released under this License.  A
+     Front-Cover Text may be at most 5 words, and a Back-Cover Text may
+     be at most 25 words.
+
+     A "Transparent" copy of the Document means a machine-readable copy,
+     represented in a format whose specification is available to the
+     general public, that is suitable for revising the document
+     straightforwardly with generic text editors or (for images composed
+     of pixels) generic paint programs or (for drawings) some widely
+     available drawing editor, and that is suitable for input to text
+     formatters or for automatic translation to a variety of formats
+     suitable for input to text formatters.  A copy made in an otherwise
+     Transparent file format whose markup, or absence of markup, has
+     been arranged to thwart or discourage subsequent modification by
+     readers is not Transparent.  An image format is not Transparent if
+     used for any substantial amount of text.  A copy that is not
+     "Transparent" is called "Opaque".
+
+     Examples of suitable formats for Transparent copies include plain
+     ASCII without markup, Texinfo input format, LaTeX input format,
+     SGML or XML using a publicly available DTD, and standard-conforming
+     simple HTML, PostScript or PDF designed for human modification.
+     Examples of transparent image formats include PNG, XCF and JPG.
+     Opaque formats include proprietary formats that can be read and
+     edited only by proprietary word processors, SGML or XML for which
+     the DTD and/or processing tools are not generally available, and
+     the machine-generated HTML, PostScript or PDF produced by some word
+     processors for output purposes only.
+
+     The "Title Page" means, for a printed book, the title page itself,
+     plus such following pages as are needed to hold, legibly, the
+     material this License requires to appear in the title page.  For
+     works in formats which do not have any title page as such, "Title
+     Page" means the text near the most prominent appearance of the
+     work's title, preceding the beginning of the body of the text.
+
+     The "publisher" means any person or entity that distributes copies
+     of the Document to the public.
+
+     A section "Entitled XYZ" means a named subunit of the Document
+     whose title either is precisely XYZ or contains XYZ in parentheses
+     following text that translates XYZ in another language.  (Here XYZ
+     stands for a specific section name mentioned below, such as
+     "Acknowledgements", "Dedications", "Endorsements", or "History".)
+     To "Preserve the Title" of such a section when you modify the
+     Document means that it remains a section "Entitled XYZ" according
+     to this definition.
+
+     The Document may include Warranty Disclaimers next to the notice
+     which states that this License applies to the Document.  These
+     Warranty Disclaimers are considered to be included by reference in
+     this License, but only as regards disclaiming warranties: any other
+     implication that these Warranty Disclaimers may have is void and
+     has no effect on the meaning of this License.
+
+  2. VERBATIM COPYING
+
+     You may copy and distribute the Document in any medium, either
+     commercially or noncommercially, provided that this License, the
+     copyright notices, and the license notice saying this License
+     applies to the Document are reproduced in all copies, and that you
+     add no other conditions whatsoever to those of this License.  You
+     may not use technical measures to obstruct or control the reading
+     or further copying of the copies you make or distribute.  However,
+     you may accept compensation in exchange for copies.  If you
+     distribute a large enough number of copies you must also follow the
+     conditions in section 3.
+
+     You may also lend copies, under the same conditions stated above,
+     and you may publicly display copies.
+
+  3. COPYING IN QUANTITY
+
+     If you publish printed copies (or copies in media that commonly
+     have printed covers) of the Document, numbering more than 100, and
+     the Document's license notice requires Cover Texts, you must
+     enclose the copies in covers that carry, clearly and legibly, all
+     these Cover Texts: Front-Cover Texts on the front cover, and
+     Back-Cover Texts on the back cover.  Both covers must also clearly
+     and legibly identify you as the publisher of these copies.  The
+     front cover must present the full title with all words of the title
+     equally prominent and visible.  You may add other material on the
+     covers in addition.  Copying with changes limited to the covers, as
+     long as they preserve the title of the Document and satisfy these
+     conditions, can be treated as verbatim copying in other respects.
+
+     If the required texts for either cover are too voluminous to fit
+     legibly, you should put the first ones listed (as many as fit
+     reasonably) on the actual cover, and continue the rest onto
+     adjacent pages.
+
+     If you publish or distribute Opaque copies of the Document
+     numbering more than 100, you must either include a machine-readable
+     Transparent copy along with each Opaque copy, or state in or with
+     each Opaque copy a computer-network location from which the general
+     network-using public has access to download using public-standard
+     network protocols a complete Transparent copy of the Document, free
+     of added material.  If you use the latter option, you must take
+     reasonably prudent steps, when you begin distribution of Opaque
+     copies in quantity, to ensure that this Transparent copy will
+     remain thus accessible at the stated location until at least one
+     year after the last time you distribute an Opaque copy (directly or
+     through your agents or retailers) of that edition to the public.
+
+     It is requested, but not required, that you contact the authors of
+     the Document well before redistributing any large number of copies,
+     to give them a chance to provide you with an updated version of the
+     Document.
+
+  4. MODIFICATIONS
+
+     You may copy and distribute a Modified Version of the Document
+     under the conditions of sections 2 and 3 above, provided that you
+     release the Modified Version under precisely this License, with the
+     Modified Version filling the role of the Document, thus licensing
+     distribution and modification of the Modified Version to whoever
+     possesses a copy of it.  In addition, you must do these things in
+     the Modified Version:
+
+       A. Use in the Title Page (and on the covers, if any) a title
+          distinct from that of the Document, and from those of previous
+          versions (which should, if there were any, be listed in the
+          History section of the Document).  You may use the same title
+          as a previous version if the original publisher of that
+          version gives permission.
+
+       B. List on the Title Page, as authors, one or more persons or
+          entities responsible for authorship of the modifications in
+          the Modified Version, together with at least five of the
+          principal authors of the Document (all of its principal
+          authors, if it has fewer than five), unless they release you
+          from this requirement.
+
+       C. State on the Title page the name of the publisher of the
+          Modified Version, as the publisher.
+
+       D. Preserve all the copyright notices of the Document.
+
+       E. Add an appropriate copyright notice for your modifications
+          adjacent to the other copyright notices.
+
+       F. Include, immediately after the copyright notices, a license
+          notice giving the public permission to use the Modified
+          Version under the terms of this License, in the form shown in
+          the Addendum below.
+
+       G. Preserve in that license notice the full lists of Invariant
+          Sections and required Cover Texts given in the Document's
+          license notice.
+
+       H. Include an unaltered copy of this License.
+
+       I. Preserve the section Entitled "History", Preserve its Title,
+          and add to it an item stating at least the title, year, new
+          authors, and publisher of the Modified Version as given on the
+          Title Page.  If there is no section Entitled "History" in the
+          Document, create one stating the title, year, authors, and
+          publisher of the Document as given on its Title Page, then add
+          an item describing the Modified Version as stated in the
+          previous sentence.
+
+       J. Preserve the network location, if any, given in the Document
+          for public access to a Transparent copy of the Document, and
+          likewise the network locations given in the Document for
+          previous versions it was based on.  These may be placed in the
+          "History" section.  You may omit a network location for a work
+          that was published at least four years before the Document
+          itself, or if the original publisher of the version it refers
+          to gives permission.
+
+       K. For any section Entitled "Acknowledgements" or "Dedications",
+          Preserve the Title of the section, and preserve in the section
+          all the substance and tone of each of the contributor
+          acknowledgements and/or dedications given therein.
+
+       L. Preserve all the Invariant Sections of the Document, unaltered
+          in their text and in their titles.  Section numbers or the
+          equivalent are not considered part of the section titles.
+
+       M. Delete any section Entitled "Endorsements".  Such a section
+          may not be included in the Modified Version.
+
+       N. Do not retitle any existing section to be Entitled
+          "Endorsements" or to conflict in title with any Invariant
+          Section.
+
+       O. Preserve any Warranty Disclaimers.
+
+     If the Modified Version includes new front-matter sections or
+     appendices that qualify as Secondary Sections and contain no
+     material copied from the Document, you may at your option designate
+     some or all of these sections as invariant.  To do this, add their
+     titles to the list of Invariant Sections in the Modified Version's
+     license notice.  These titles must be distinct from any other
+     section titles.
+
+     You may add a section Entitled "Endorsements", provided it contains
+     nothing but endorsements of your Modified Version by various
+     parties--for example, statements of peer review or that the text
+     has been approved by an organization as the authoritative
+     definition of a standard.
+
+     You may add a passage of up to five words as a Front-Cover Text,
+     and a passage of up to 25 words as a Back-Cover Text, to the end of
+     the list of Cover Texts in the Modified Version.  Only one passage
+     of Front-Cover Text and one of Back-Cover Text may be added by (or
+     through arrangements made by) any one entity.  If the Document
+     already includes a cover text for the same cover, previously added
+     by you or by arrangement made by the same entity you are acting on
+     behalf of, you may not add another; but you may replace the old
+     one, on explicit permission from the previous publisher that added
+     the old one.
+
+     The author(s) and publisher(s) of the Document do not by this
+     License give permission to use their names for publicity for or to
+     assert or imply endorsement of any Modified Version.
+
+  5. COMBINING DOCUMENTS
+
+     You may combine the Document with other documents released under
+     this License, under the terms defined in section 4 above for
+     modified versions, provided that you include in the combination all
+     of the Invariant Sections of all of the original documents,
+     unmodified, and list them all as Invariant Sections of your
+     combined work in its license notice, and that you preserve all
+     their Warranty Disclaimers.
+
+     The combined work need only contain one copy of this License, and
+     multiple identical Invariant Sections may be replaced with a single
+     copy.  If there are multiple Invariant Sections with the same name
+     but different contents, make the title of each such section unique
+     by adding at the end of it, in parentheses, the name of the
+     original author or publisher of that section if known, or else a
+     unique number.  Make the same adjustment to the section titles in
+     the list of Invariant Sections in the license notice of the
+     combined work.
+
+     In the combination, you must combine any sections Entitled
+     "History" in the various original documents, forming one section
+     Entitled "History"; likewise combine any sections Entitled
+     "Acknowledgements", and any sections Entitled "Dedications".  You
+     must delete all sections Entitled "Endorsements."
+
+  6. COLLECTIONS OF DOCUMENTS
+
+     You may make a collection consisting of the Document and other
+     documents released under this License, and replace the individual
+     copies of this License in the various documents with a single copy
+     that is included in the collection, provided that you follow the
+     rules of this License for verbatim copying of each of the documents
+     in all other respects.
+
+     You may extract a single document from such a collection, and
+     distribute it individually under this License, provided you insert
+     a copy of this License into the extracted document, and follow this
+     License in all other respects regarding verbatim copying of that
+     document.
+
+  7. AGGREGATION WITH INDEPENDENT WORKS
+
+     A compilation of the Document or its derivatives with other
+     separate and independent documents or works, in or on a volume of a
+     storage or distribution medium, is called an "aggregate" if the
+     copyright resulting from the compilation is not used to limit the
+     legal rights of the compilation's users beyond what the individual
+     works permit.  When the Document is included in an aggregate, this
+     License does not apply to the other works in the aggregate which
+     are not themselves derivative works of the Document.
+
+     If the Cover Text requirement of section 3 is applicable to these
+     copies of the Document, then if the Document is less than one half
+     of the entire aggregate, the Document's Cover Texts may be placed
+     on covers that bracket the Document within the aggregate, or the
+     electronic equivalent of covers if the Document is in electronic
+     form.  Otherwise they must appear on printed covers that bracket
+     the whole aggregate.
+
+  8. TRANSLATION
+
+     Translation is considered a kind of modification, so you may
+     distribute translations of the Document under the terms of section
+     4.  Replacing Invariant Sections with translations requires special
+     permission from their copyright holders, but you may include
+     translations of some or all Invariant Sections in addition to the
+     original versions of these Invariant Sections.  You may include a
+     translation of this License, and all the license notices in the
+     Document, and any Warranty Disclaimers, provided that you also
+     include the original English version of this License and the
+     original versions of those notices and disclaimers.  In case of a
+     disagreement between the translation and the original version of
+     this License or a notice or disclaimer, the original version will
+     prevail.
+
+     If a section in the Document is Entitled "Acknowledgements",
+     "Dedications", or "History", the requirement (section 4) to
+     Preserve its Title (section 1) will typically require changing the
+     actual title.
+
+  9. TERMINATION
+
+     You may not copy, modify, sublicense, or distribute the Document
+     except as expressly provided under this License.  Any attempt
+     otherwise to copy, modify, sublicense, or distribute it is void,
+     and will automatically terminate your rights under this License.
+
+     However, if you cease all violation of this License, then your
+     license from a particular copyright holder is reinstated (a)
+     provisionally, unless and until the copyright holder explicitly and
+     finally terminates your license, and (b) permanently, if the
+     copyright holder fails to notify you of the violation by some
+     reasonable means prior to 60 days after the cessation.
+
+     Moreover, your license from a particular copyright holder is
+     reinstated permanently if the copyright holder notifies you of the
+     violation by some reasonable means, this is the first time you have
+     received notice of violation of this License (for any work) from
+     that copyright holder, and you cure the violation prior to 30 days
+     after your receipt of the notice.
+
+     Termination of your rights under this section does not terminate
+     the licenses of parties who have received copies or rights from you
+     under this License.  If your rights have been terminated and not
+     permanently reinstated, receipt of a copy of some or all of the
+     same material does not give you any rights to use it.
+
+  10. FUTURE REVISIONS OF THIS LICENSE
+
+     The Free Software Foundation may publish new, revised versions of
+     the GNU Free Documentation License from time to time.  Such new
+     versions will be similar in spirit to the present version, but may
+     differ in detail to address new problems or concerns.  See
+     <http://www.gnu.org/copyleft/>.
+
+     Each version of the License is given a distinguishing version
+     number.  If the Document specifies that a particular numbered
+     version of this License "or any later version" applies to it, you
+     have the option of following the terms and conditions either of
+     that specified version or of any later version that has been
+     published (not as a draft) by the Free Software Foundation.  If the
+     Document does not specify a version number of this License, you may
+     choose any version ever published (not as a draft) by the Free
+     Software Foundation.  If the Document specifies that a proxy can
+     decide which future versions of this License can be used, that
+     proxy's public statement of acceptance of a version permanently
+     authorizes you to choose that version for the Document.
+
+  11. RELICENSING
+
+     "Massive Multiauthor Collaboration Site" (or "MMC Site") means any
+     World Wide Web server that publishes copyrightable works and also
+     provides prominent facilities for anybody to edit those works.  A
+     public wiki that anybody can edit is an example of such a server.
+     A "Massive Multiauthor Collaboration" (or "MMC") contained in the
+     site means any set of copyrightable works thus published on the MMC
+     site.
+
+     "CC-BY-SA" means the Creative Commons Attribution-Share Alike 3.0
+     license published by Creative Commons Corporation, a not-for-profit
+     corporation with a principal place of business in San Francisco,
+     California, as well as future copyleft versions of that license
+     published by that same organization.
+
+     "Incorporate" means to publish or republish a Document, in whole or
+     in part, as part of another Document.
+
+     An MMC is "eligible for relicensing" if it is licensed under this
+     License, and if all works that were first published under this
+     License somewhere other than this MMC, and subsequently
+     incorporated in whole or in part into the MMC, (1) had no cover
+     texts or invariant sections, and (2) were thus incorporated prior
+     to November 1, 2008.
+
+     The operator of an MMC Site may republish an MMC contained in the
+     site under CC-BY-SA on the same site at any time before August 1,
+     2009, provided the MMC is eligible for relicensing.
+
+ADDENDUM: How to use this License for your documents
+====================================================
+
+To use this License in a document you have written, include a copy of
+the License in the document and put the following copyright and license
+notices just after the title page:
+
+       Copyright (C)  YEAR  YOUR NAME.
+       Permission is granted to copy, distribute and/or modify this document
+       under the terms of the GNU Free Documentation License, Version 1.3
+       or any later version published by the Free Software Foundation;
+       with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
+       Texts.  A copy of the license is included in the section entitled ``GNU
+       Free Documentation License''.
+
+   If you have Invariant Sections, Front-Cover Texts and Back-Cover
+Texts, replace the "with...Texts."  line with this:
+
+         with the Invariant Sections being LIST THEIR TITLES, with
+         the Front-Cover Texts being LIST, and with the Back-Cover Texts
+         being LIST.
+
+   If you have Invariant Sections without Cover Texts, or some other
+combination of the three, merge those two alternatives to suit the
+situation.
+
+   If your document contains nontrivial examples of program code, we
+recommend releasing these examples in parallel under your choice of free
+software license, such as the GNU General Public License, to permit
+their use in free software.
+
+
+File: bashref.info,  Node: Indexes,  Prev: GNU Free Documentation License,  Up: Top
+
+Appendix D Indexes
+******************
+
+* Menu:
+
+* Builtin Index::		Index of Bash builtin commands.
+* Reserved Word Index::		Index of Bash reserved words.
+* Variable Index::		Quick reference helps you find the
+				variable you want.
+* Function Index::		Index of bindable Readline functions.
+* Concept Index::		General index for concepts described in
+				this manual.
+
+
+File: bashref.info,  Node: Builtin Index,  Next: Reserved Word Index,  Up: Indexes
+
+D.1 Index of Shell Builtin Commands
+===================================
+
+
+* Menu:
+
+* .:                                     Bourne Shell Builtins.
+                                                              (line  17)
+* ::                                     Bourne Shell Builtins.
+                                                              (line  11)
+* [:                                     Bourne Shell Builtins.
+                                                              (line 270)
+* alias:                                 Bash Builtins.       (line  11)
+* bg:                                    Job Control Builtins.
+                                                              (line   7)
+* bind:                                  Bash Builtins.       (line  21)
+* break:                                 Bourne Shell Builtins.
+                                                              (line  36)
+* builtin:                               Bash Builtins.       (line 104)
+* caller:                                Bash Builtins.       (line 113)
+* cd:                                    Bourne Shell Builtins.
+                                                              (line  44)
+* command:                               Bash Builtins.       (line 130)
+* compgen:                               Programmable Completion Builtins.
+                                                              (line  12)
+* complete:                              Programmable Completion Builtins.
+                                                              (line  30)
+* compopt:                               Programmable Completion Builtins.
+                                                              (line 237)
+* continue:                              Bourne Shell Builtins.
+                                                              (line  85)
+* declare:                               Bash Builtins.       (line 150)
+* dirs:                                  Directory Stack Builtins.
+                                                              (line   7)
+* disown:                                Job Control Builtins.
+                                                              (line 101)
+* echo:                                  Bash Builtins.       (line 253)
+* enable:                                Bash Builtins.       (line 302)
+* eval:                                  Bourne Shell Builtins.
+                                                              (line  94)
+* exec:                                  Bourne Shell Builtins.
+                                                              (line 102)
+* exit:                                  Bourne Shell Builtins.
+                                                              (line 120)
+* export:                                Bourne Shell Builtins.
+                                                              (line 127)
+* fc:                                    Bash History Builtins.
+                                                              (line  10)
+* fg:                                    Job Control Builtins.
+                                                              (line  17)
+* getopts:                               Bourne Shell Builtins.
+                                                              (line 143)
+* hash:                                  Bourne Shell Builtins.
+                                                              (line 187)
+* help:                                  Bash Builtins.       (line 331)
+* history:                               Bash History Builtins.
+                                                              (line  46)
+* jobs:                                  Job Control Builtins.
+                                                              (line  27)
+* kill:                                  Job Control Builtins.
+                                                              (line  58)
+* let:                                   Bash Builtins.       (line 350)
+* local:                                 Bash Builtins.       (line 358)
+* logout:                                Bash Builtins.       (line 374)
+* mapfile:                               Bash Builtins.       (line 379)
+* popd:                                  Directory Stack Builtins.
+                                                              (line  35)
+* printf:                                Bash Builtins.       (line 425)
+* pushd:                                 Directory Stack Builtins.
+                                                              (line  53)
+* pwd:                                   Bourne Shell Builtins.
+                                                              (line 207)
+* read:                                  Bash Builtins.       (line 474)
+* readarray:                             Bash Builtins.       (line 570)
+* readonly:                              Bourne Shell Builtins.
+                                                              (line 217)
+* return:                                Bourne Shell Builtins.
+                                                              (line 236)
+* set:                                   The Set Builtin.     (line  11)
+* shift:                                 Bourne Shell Builtins.
+                                                              (line 257)
+* shopt:                                 The Shopt Builtin.   (line   9)
+* source:                                Bash Builtins.       (line 579)
+* suspend:                               Job Control Builtins.
+                                                              (line 113)
+* test:                                  Bourne Shell Builtins.
+                                                              (line 270)
+* times:                                 Bourne Shell Builtins.
+                                                              (line 349)
+* trap:                                  Bourne Shell Builtins.
+                                                              (line 355)
+* type:                                  Bash Builtins.       (line 584)
+* typeset:                               Bash Builtins.       (line 616)
+* ulimit:                                Bash Builtins.       (line 622)
+* umask:                                 Bourne Shell Builtins.
+                                                              (line 404)
+* unalias:                               Bash Builtins.       (line 728)
+* unset:                                 Bourne Shell Builtins.
+                                                              (line 422)
+* wait:                                  Job Control Builtins.
+                                                              (line  76)
+
+
+File: bashref.info,  Node: Reserved Word Index,  Next: Variable Index,  Prev: Builtin Index,  Up: Indexes
+
+D.2 Index of Shell Reserved Words
+=================================
+
+
+* Menu:
+
+* !:                                     Pipelines.           (line   9)
+* [[:                                    Conditional Constructs.
+                                                              (line 125)
+* ]]:                                    Conditional Constructs.
+                                                              (line 125)
+* {:                                     Command Grouping.    (line  21)
+* }:                                     Command Grouping.    (line  21)
+* case:                                  Conditional Constructs.
+                                                              (line  28)
+* do:                                    Looping Constructs.  (line  12)
+* done:                                  Looping Constructs.  (line  12)
+* elif:                                  Conditional Constructs.
+                                                              (line   7)
+* else:                                  Conditional Constructs.
+                                                              (line   7)
+* esac:                                  Conditional Constructs.
+                                                              (line  28)
+* fi:                                    Conditional Constructs.
+                                                              (line   7)
+* for:                                   Looping Constructs.  (line  32)
+* function:                              Shell Functions.     (line  13)
+* if:                                    Conditional Constructs.
+                                                              (line   7)
+* in:                                    Conditional Constructs.
+                                                              (line  28)
+* select:                                Conditional Constructs.
+                                                              (line  83)
+* then:                                  Conditional Constructs.
+                                                              (line   7)
+* time:                                  Pipelines.           (line   9)
+* until:                                 Looping Constructs.  (line  12)
+* while:                                 Looping Constructs.  (line  22)
+
+
+File: bashref.info,  Node: Variable Index,  Next: Function Index,  Prev: Reserved Word Index,  Up: Indexes
+
+D.3 Parameter and Variable Index
+================================
+
+
+* Menu:
+
+* !:                                     Special Parameters.  (line  56)
+* #:                                     Special Parameters.  (line  39)
+* $:                                     Special Parameters.  (line  51)
+* $!:                                    Special Parameters.  (line  57)
+* $#:                                    Special Parameters.  (line  40)
+* $$:                                    Special Parameters.  (line  52)
+* $*:                                    Special Parameters.  (line  10)
+* $-:                                    Special Parameters.  (line  47)
+* $0:                                    Special Parameters.  (line  62)
+* $?:                                    Special Parameters.  (line  43)
+* $@:                                    Special Parameters.  (line  23)
+* $_:                                    Bash Variables.      (line  14)
+* *:                                     Special Parameters.  (line   9)
+* -:                                     Special Parameters.  (line  46)
+* 0:                                     Special Parameters.  (line  61)
+* ?:                                     Special Parameters.  (line  42)
+* @:                                     Special Parameters.  (line  22)
+* _:                                     Bash Variables.      (line  13)
+* auto_resume:                           Job Control Variables.
+                                                              (line   6)
+* BASH:                                  Bash Variables.      (line  23)
+* BASHOPTS:                              Bash Variables.      (line  26)
+* BASHPID:                               Bash Variables.      (line  35)
+* BASH_ALIASES:                          Bash Variables.      (line  42)
+* BASH_ARGC:                             Bash Variables.      (line  51)
+* BASH_ARGV:                             Bash Variables.      (line  64)
+* BASH_ARGV0:                            Bash Variables.      (line  76)
+* BASH_CMDS:                             Bash Variables.      (line  84)
+* BASH_COMMAND:                          Bash Variables.      (line  93)
+* BASH_COMPAT:                           Bash Variables.      (line 100)
+* BASH_ENV:                              Bash Variables.      (line 116)
+* BASH_EXECUTION_STRING:                 Bash Variables.      (line 122)
+* BASH_LINENO:                           Bash Variables.      (line 125)
+* BASH_LOADABLES_PATH:                   Bash Variables.      (line 133)
+* BASH_REMATCH:                          Bash Variables.      (line 137)
+* BASH_SOURCE:                           Bash Variables.      (line 145)
+* BASH_SUBSHELL:                         Bash Variables.      (line 152)
+* BASH_VERSINFO:                         Bash Variables.      (line 158)
+* BASH_VERSION:                          Bash Variables.      (line 181)
+* BASH_XTRACEFD:                         Bash Variables.      (line 184)
+* bell-style:                            Readline Init File Syntax.
+                                                              (line  38)
+* bind-tty-special-chars:                Readline Init File Syntax.
+                                                              (line  45)
+* blink-matching-paren:                  Readline Init File Syntax.
+                                                              (line  50)
+* CDPATH:                                Bourne Shell Variables.
+                                                              (line   9)
+* CHILD_MAX:                             Bash Variables.      (line 195)
+* colored-completion-prefix:             Readline Init File Syntax.
+                                                              (line  55)
+* colored-stats:                         Readline Init File Syntax.
+                                                              (line  62)
+* COLUMNS:                               Bash Variables.      (line 202)
+* comment-begin:                         Readline Init File Syntax.
+                                                              (line  68)
+* completion-display-width:              Readline Init File Syntax.
+                                                              (line  73)
+* completion-ignore-case:                Readline Init File Syntax.
+                                                              (line  80)
+* completion-map-case:                   Readline Init File Syntax.
+                                                              (line  85)
+* completion-prefix-display-length:      Readline Init File Syntax.
+                                                              (line  91)
+* completion-query-items:                Readline Init File Syntax.
+                                                              (line  98)
+* COMPREPLY:                             Bash Variables.      (line 254)
+* COMP_CWORD:                            Bash Variables.      (line 208)
+* COMP_KEY:                              Bash Variables.      (line 237)
+* COMP_LINE:                             Bash Variables.      (line 214)
+* COMP_POINT:                            Bash Variables.      (line 219)
+* COMP_TYPE:                             Bash Variables.      (line 227)
+* COMP_WORDBREAKS:                       Bash Variables.      (line 241)
+* COMP_WORDS:                            Bash Variables.      (line 247)
+* convert-meta:                          Readline Init File Syntax.
+                                                              (line 108)
+* COPROC:                                Bash Variables.      (line 260)
+* DIRSTACK:                              Bash Variables.      (line 264)
+* disable-completion:                    Readline Init File Syntax.
+                                                              (line 116)
+* echo-control-characters:               Readline Init File Syntax.
+                                                              (line 121)
+* editing-mode:                          Readline Init File Syntax.
+                                                              (line 126)
+* EMACS:                                 Bash Variables.      (line 274)
+* emacs-mode-string:                     Readline Init File Syntax.
+                                                              (line 132)
+* enable-bracketed-paste:                Readline Init File Syntax.
+                                                              (line 142)
+* enable-keypad:                         Readline Init File Syntax.
+                                                              (line 150)
+* ENV:                                   Bash Variables.      (line 279)
+* EPOCHREALTIME:                         Bash Variables.      (line 284)
+* EPOCHSECONDS:                          Bash Variables.      (line 292)
+* EUID:                                  Bash Variables.      (line 299)
+* EXECIGNORE:                            Bash Variables.      (line 303)
+* expand-tilde:                          Readline Init File Syntax.
+                                                              (line 161)
+* FCEDIT:                                Bash Variables.      (line 316)
+* FIGNORE:                               Bash Variables.      (line 320)
+* FUNCNAME:                              Bash Variables.      (line 326)
+* FUNCNEST:                              Bash Variables.      (line 343)
+* GLOBIGNORE:                            Bash Variables.      (line 348)
+* GROUPS:                                Bash Variables.      (line 355)
+* histchars:                             Bash Variables.      (line 361)
+* HISTCMD:                               Bash Variables.      (line 376)
+* HISTCONTROL:                           Bash Variables.      (line 382)
+* HISTFILE:                              Bash Variables.      (line 398)
+* HISTFILESIZE:                          Bash Variables.      (line 402)
+* HISTIGNORE:                            Bash Variables.      (line 413)
+* history-preserve-point:                Readline Init File Syntax.
+                                                              (line 165)
+* history-size:                          Readline Init File Syntax.
+                                                              (line 171)
+* HISTSIZE:                              Bash Variables.      (line 433)
+* HISTTIMEFORMAT:                        Bash Variables.      (line 440)
+* HOME:                                  Bourne Shell Variables.
+                                                              (line  13)
+* horizontal-scroll-mode:                Readline Init File Syntax.
+                                                              (line 180)
+* HOSTFILE:                              Bash Variables.      (line 448)
+* HOSTNAME:                              Bash Variables.      (line 459)
+* HOSTTYPE:                              Bash Variables.      (line 462)
+* IFS:                                   Bourne Shell Variables.
+                                                              (line  18)
+* IGNOREEOF:                             Bash Variables.      (line 465)
+* input-meta:                            Readline Init File Syntax.
+                                                              (line 189)
+* INPUTRC:                               Bash Variables.      (line 475)
+* INSIDE_EMACS:                          Bash Variables.      (line 479)
+* isearch-terminators:                   Readline Init File Syntax.
+                                                              (line 197)
+* keymap:                                Readline Init File Syntax.
+                                                              (line 204)
+* LANG:                                  Bash Variables.      (line 485)
+* LC_ALL:                                Bash Variables.      (line 489)
+* LC_COLLATE:                            Bash Variables.      (line 493)
+* LC_CTYPE:                              Bash Variables.      (line 500)
+* LC_MESSAGES:                           Locale Translation.  (line  15)
+* LC_MESSAGES <1>:                       Bash Variables.      (line 505)
+* LC_NUMERIC:                            Bash Variables.      (line 509)
+* LC_TIME:                               Bash Variables.      (line 513)
+* LINENO:                                Bash Variables.      (line 517)
+* LINES:                                 Bash Variables.      (line 522)
+* MACHTYPE:                              Bash Variables.      (line 528)
+* MAIL:                                  Bourne Shell Variables.
+                                                              (line  22)
+* MAILCHECK:                             Bash Variables.      (line 532)
+* MAILPATH:                              Bourne Shell Variables.
+                                                              (line  27)
+* MAPFILE:                               Bash Variables.      (line 540)
+* mark-modified-lines:                   Readline Init File Syntax.
+                                                              (line 234)
+* mark-symlinked-directories:            Readline Init File Syntax.
+                                                              (line 239)
+* match-hidden-files:                    Readline Init File Syntax.
+                                                              (line 244)
+* menu-complete-display-prefix:          Readline Init File Syntax.
+                                                              (line 251)
+* meta-flag:                             Readline Init File Syntax.
+                                                              (line 189)
+* OLDPWD:                                Bash Variables.      (line 544)
+* OPTARG:                                Bourne Shell Variables.
+                                                              (line  34)
+* OPTERR:                                Bash Variables.      (line 547)
+* OPTIND:                                Bourne Shell Variables.
+                                                              (line  38)
+* OSTYPE:                                Bash Variables.      (line 551)
+* output-meta:                           Readline Init File Syntax.
+                                                              (line 256)
+* page-completions:                      Readline Init File Syntax.
+                                                              (line 262)
+* PATH:                                  Bourne Shell Variables.
+                                                              (line  42)
+* PIPESTATUS:                            Bash Variables.      (line 554)
+* POSIXLY_CORRECT:                       Bash Variables.      (line 559)
+* PPID:                                  Bash Variables.      (line 569)
+* PROMPT_COMMAND:                        Bash Variables.      (line 573)
+* PROMPT_DIRTRIM:                        Bash Variables.      (line 579)
+* PS0:                                   Bash Variables.      (line 585)
+* PS1:                                   Bourne Shell Variables.
+                                                              (line  48)
+* PS2:                                   Bourne Shell Variables.
+                                                              (line  53)
+* PS3:                                   Bash Variables.      (line 590)
+* PS4:                                   Bash Variables.      (line 595)
+* PWD:                                   Bash Variables.      (line 603)
+* RANDOM:                                Bash Variables.      (line 606)
+* READLINE_LINE:                         Bash Variables.      (line 612)
+* READLINE_MARK:                         Bash Variables.      (line 616)
+* READLINE_POINT:                        Bash Variables.      (line 622)
+* REPLY:                                 Bash Variables.      (line 626)
+* revert-all-at-newline:                 Readline Init File Syntax.
+                                                              (line 272)
+* SECONDS:                               Bash Variables.      (line 629)
+* SHELL:                                 Bash Variables.      (line 638)
+* SHELLOPTS:                             Bash Variables.      (line 643)
+* SHLVL:                                 Bash Variables.      (line 652)
+* show-all-if-ambiguous:                 Readline Init File Syntax.
+                                                              (line 278)
+* show-all-if-unmodified:                Readline Init File Syntax.
+                                                              (line 284)
+* show-mode-in-prompt:                   Readline Init File Syntax.
+                                                              (line 293)
+* skip-completed-text:                   Readline Init File Syntax.
+                                                              (line 299)
+* SRANDOM:                               Bash Variables.      (line 657)
+* TEXTDOMAIN:                            Locale Translation.  (line  15)
+* TEXTDOMAINDIR:                         Locale Translation.  (line  15)
+* TIMEFORMAT:                            Bash Variables.      (line 666)
+* TMOUT:                                 Bash Variables.      (line 704)
+* TMPDIR:                                Bash Variables.      (line 716)
+* UID:                                   Bash Variables.      (line 720)
+* vi-cmd-mode-string:                    Readline Init File Syntax.
+                                                              (line 312)
+* vi-ins-mode-string:                    Readline Init File Syntax.
+                                                              (line 323)
+* visible-stats:                         Readline Init File Syntax.
+                                                              (line 334)
+
+
+File: bashref.info,  Node: Function Index,  Next: Concept Index,  Prev: Variable Index,  Up: Indexes
+
+D.4 Function Index
+==================
+
+
+* Menu:
+
+* abort (C-g):                           Miscellaneous Commands.
+                                                              (line  10)
+* accept-line (Newline or Return):       Commands For History.
+                                                              (line   6)
+* alias-expand-line ():                  Miscellaneous Commands.
+                                                              (line 125)
+* backward-char (C-b):                   Commands For Moving. (line  15)
+* backward-delete-char (Rubout):         Commands For Text.   (line  17)
+* backward-kill-line (C-x Rubout):       Commands For Killing.
+                                                              (line  11)
+* backward-kill-word (M-<DEL>):          Commands For Killing.
+                                                              (line  28)
+* backward-word (M-b):                   Commands For Moving. (line  22)
+* beginning-of-history (M-<):            Commands For History.
+                                                              (line  20)
+* beginning-of-line (C-a):               Commands For Moving. (line   6)
+* bracketed-paste-begin ():              Commands For Text.   (line  33)
+* call-last-kbd-macro (C-x e):           Keyboard Macros.     (line  13)
+* capitalize-word (M-c):                 Commands For Text.   (line  66)
+* character-search (C-]):                Miscellaneous Commands.
+                                                              (line  42)
+* character-search-backward (M-C-]):     Miscellaneous Commands.
+                                                              (line  47)
+* clear-display (M-C-l):                 Commands For Moving. (line  48)
+* clear-screen (C-l):                    Commands For Moving. (line  53)
+* complete (<TAB>):                      Commands For Completion.
+                                                              (line   6)
+* complete-command (M-!):                Commands For Completion.
+                                                              (line  80)
+* complete-filename (M-/):               Commands For Completion.
+                                                              (line  49)
+* complete-hostname (M-@):               Commands For Completion.
+                                                              (line  72)
+* complete-into-braces (M-{):            Commands For Completion.
+                                                              (line 100)
+* complete-username (M-~):               Commands For Completion.
+                                                              (line  56)
+* complete-variable (M-$):               Commands For Completion.
+                                                              (line  64)
+* copy-backward-word ():                 Commands For Killing.
+                                                              (line  69)
+* copy-forward-word ():                  Commands For Killing.
+                                                              (line  74)
+* copy-region-as-kill ():                Commands For Killing.
+                                                              (line  65)
+* dabbrev-expand ():                     Commands For Completion.
+                                                              (line  95)
+* delete-char (C-d):                     Commands For Text.   (line  12)
+* delete-char-or-list ():                Commands For Completion.
+                                                              (line  43)
+* delete-horizontal-space ():            Commands For Killing.
+                                                              (line  57)
+* digit-argument (M-0, M-1, ... M--):    Numeric Arguments.   (line   6)
+* display-shell-version (C-x C-v):       Miscellaneous Commands.
+                                                              (line 110)
+* do-lowercase-version (M-A, M-B, M-X, ...): Miscellaneous Commands.
+                                                              (line  14)
+* downcase-word (M-l):                   Commands For Text.   (line  62)
+* dump-functions ():                     Miscellaneous Commands.
+                                                              (line  74)
+* dump-macros ():                        Miscellaneous Commands.
+                                                              (line  86)
+* dump-variables ():                     Miscellaneous Commands.
+                                                              (line  80)
+* dynamic-complete-history (M-<TAB>):    Commands For Completion.
+                                                              (line  90)
+* edit-and-execute-command (C-x C-e):    Miscellaneous Commands.
+                                                              (line 134)
+* end-kbd-macro (C-x )):                 Keyboard Macros.     (line   9)
+* end-of-file (usually C-d):             Commands For Text.   (line   6)
+* end-of-history (M->):                  Commands For History.
+                                                              (line  23)
+* end-of-line (C-e):                     Commands For Moving. (line   9)
+* exchange-point-and-mark (C-x C-x):     Miscellaneous Commands.
+                                                              (line  37)
+* forward-backward-delete-char ():       Commands For Text.   (line  21)
+* forward-char (C-f):                    Commands For Moving. (line  12)
+* forward-search-history (C-s):          Commands For History.
+                                                              (line  33)
+* forward-word (M-f):                    Commands For Moving. (line  18)
+* glob-complete-word (M-g):              Miscellaneous Commands.
+                                                              (line  92)
+* glob-expand-word (C-x *):              Miscellaneous Commands.
+                                                              (line  98)
+* glob-list-expansions (C-x g):          Miscellaneous Commands.
+                                                              (line 104)
+* history-and-alias-expand-line ():      Miscellaneous Commands.
+                                                              (line 128)
+* history-expand-line (M-^):             Miscellaneous Commands.
+                                                              (line 118)
+* history-search-backward ():            Commands For History.
+                                                              (line  57)
+* history-search-forward ():             Commands For History.
+                                                              (line  51)
+* history-substring-search-backward ():  Commands For History.
+                                                              (line  69)
+* history-substring-search-forward ():   Commands For History.
+                                                              (line  63)
+* insert-comment (M-#):                  Miscellaneous Commands.
+                                                              (line  61)
+* insert-completions (M-*):              Commands For Completion.
+                                                              (line  22)
+* insert-last-argument (M-. or M-_):     Miscellaneous Commands.
+                                                              (line 131)
+* kill-line (C-k):                       Commands For Killing.
+                                                              (line   6)
+* kill-region ():                        Commands For Killing.
+                                                              (line  61)
+* kill-whole-line ():                    Commands For Killing.
+                                                              (line  19)
+* kill-word (M-d):                       Commands For Killing.
+                                                              (line  23)
+* magic-space ():                        Miscellaneous Commands.
+                                                              (line 121)
+* menu-complete ():                      Commands For Completion.
+                                                              (line  26)
+* menu-complete-backward ():             Commands For Completion.
+                                                              (line  38)
+* next-history (C-n):                    Commands For History.
+                                                              (line  17)
+* next-screen-line ():                   Commands For Moving. (line  41)
+* non-incremental-forward-search-history (M-n): Commands For History.
+                                                              (line  45)
+* non-incremental-reverse-search-history (M-p): Commands For History.
+                                                              (line  39)
+* operate-and-get-next (C-o):            Commands For History.
+                                                              (line  96)
+* overwrite-mode ():                     Commands For Text.   (line  70)
+* possible-command-completions (C-x !):  Commands For Completion.
+                                                              (line  86)
+* possible-completions (M-?):            Commands For Completion.
+                                                              (line  15)
+* possible-filename-completions (C-x /): Commands For Completion.
+                                                              (line  52)
+* possible-hostname-completions (C-x @): Commands For Completion.
+                                                              (line  76)
+* possible-username-completions (C-x ~): Commands For Completion.
+                                                              (line  60)
+* possible-variable-completions (C-x $): Commands For Completion.
+                                                              (line  68)
+* prefix-meta (<ESC>):                   Miscellaneous Commands.
+                                                              (line  19)
+* previous-history (C-p):                Commands For History.
+                                                              (line  13)
+* previous-screen-line ():               Commands For Moving. (line  34)
+* print-last-kbd-macro ():               Keyboard Macros.     (line  17)
+* quoted-insert (C-q or C-v):            Commands For Text.   (line  26)
+* re-read-init-file (C-x C-r):           Miscellaneous Commands.
+                                                              (line   6)
+* redraw-current-line ():                Commands For Moving. (line  57)
+* reverse-search-history (C-r):          Commands For History.
+                                                              (line  27)
+* revert-line (M-r):                     Miscellaneous Commands.
+                                                              (line  26)
+* self-insert (a, b, A, 1, !, ...):      Commands For Text.   (line  30)
+* set-mark (C-@):                        Miscellaneous Commands.
+                                                              (line  33)
+* shell-backward-kill-word ():           Commands For Killing.
+                                                              (line  37)
+* shell-backward-word (M-C-b):           Commands For Moving. (line  30)
+* shell-expand-line (M-C-e):             Miscellaneous Commands.
+                                                              (line 113)
+* shell-forward-word (M-C-f):            Commands For Moving. (line  26)
+* shell-kill-word (M-C-d):               Commands For Killing.
+                                                              (line  32)
+* shell-transpose-words (M-C-t):         Commands For Killing.
+                                                              (line  41)
+* skip-csi-sequence ():                  Miscellaneous Commands.
+                                                              (line  52)
+* start-kbd-macro (C-x ():               Keyboard Macros.     (line   6)
+* tilde-expand (M-&):                    Miscellaneous Commands.
+                                                              (line  30)
+* transpose-chars (C-t):                 Commands For Text.   (line  47)
+* transpose-words (M-t):                 Commands For Text.   (line  53)
+* undo (C-_ or C-x C-u):                 Miscellaneous Commands.
+                                                              (line  23)
+* universal-argument ():                 Numeric Arguments.   (line  10)
+* unix-filename-rubout ():               Commands For Killing.
+                                                              (line  52)
+* unix-line-discard (C-u):               Commands For Killing.
+                                                              (line  16)
+* unix-word-rubout (C-w):                Commands For Killing.
+                                                              (line  48)
+* upcase-word (M-u):                     Commands For Text.   (line  58)
+* yank (C-y):                            Commands For Killing.
+                                                              (line  79)
+* yank-last-arg (M-. or M-_):            Commands For History.
+                                                              (line  84)
+* yank-nth-arg (M-C-y):                  Commands For History.
+                                                              (line  75)
+* yank-pop (M-y):                        Commands For Killing.
+                                                              (line  82)
+
+
+File: bashref.info,  Node: Concept Index,  Prev: Function Index,  Up: Indexes
+
+D.5 Concept Index
+=================
+
+
+* Menu:
+
+* alias expansion:                       Aliases.             (line   6)
+* arithmetic evaluation:                 Shell Arithmetic.    (line   6)
+* arithmetic expansion:                  Arithmetic Expansion.
+                                                              (line   6)
+* arithmetic, shell:                     Shell Arithmetic.    (line   6)
+* arrays:                                Arrays.              (line   6)
+* background:                            Job Control Basics.  (line   6)
+* Bash configuration:                    Basic Installation.  (line   6)
+* Bash installation:                     Basic Installation.  (line   6)
+* Bourne shell:                          Basic Shell Features.
+                                                              (line   6)
+* brace expansion:                       Brace Expansion.     (line   6)
+* builtin:                               Definitions.         (line  17)
+* command editing:                       Readline Bare Essentials.
+                                                              (line   6)
+* command execution:                     Command Search and Execution.
+                                                              (line   6)
+* command expansion:                     Simple Command Expansion.
+                                                              (line   6)
+* command history:                       Bash History Facilities.
+                                                              (line   6)
+* command search:                        Command Search and Execution.
+                                                              (line   6)
+* command substitution:                  Command Substitution.
+                                                              (line   6)
+* command timing:                        Pipelines.           (line   9)
+* commands, compound:                    Compound Commands.   (line   6)
+* commands, conditional:                 Conditional Constructs.
+                                                              (line   6)
+* commands, grouping:                    Command Grouping.    (line   6)
+* commands, lists:                       Lists.               (line   6)
+* commands, looping:                     Looping Constructs.  (line   6)
+* commands, pipelines:                   Pipelines.           (line   6)
+* commands, shell:                       Shell Commands.      (line   6)
+* commands, simple:                      Simple Commands.     (line   6)
+* comments, shell:                       Comments.            (line   6)
+* Compatibility Level:                   Shell Compatibility Mode.
+                                                              (line   6)
+* Compatibility Mode:                    Shell Compatibility Mode.
+                                                              (line   6)
+* completion builtins:                   Programmable Completion Builtins.
+                                                              (line   6)
+* configuration:                         Basic Installation.  (line   6)
+* control operator:                      Definitions.         (line  21)
+* coprocess:                             Coprocesses.         (line   6)
+* directory stack:                       The Directory Stack. (line   6)
+* editing command lines:                 Readline Bare Essentials.
+                                                              (line   6)
+* environment:                           Environment.         (line   6)
+* evaluation, arithmetic:                Shell Arithmetic.    (line   6)
+* event designators:                     Event Designators.   (line   6)
+* execution environment:                 Command Execution Environment.
+                                                              (line   6)
+* exit status:                           Definitions.         (line  26)
+* exit status <1>:                       Exit Status.         (line   6)
+* expansion:                             Shell Expansions.    (line   6)
+* expansion, arithmetic:                 Arithmetic Expansion.
+                                                              (line   6)
+* expansion, brace:                      Brace Expansion.     (line   6)
+* expansion, filename:                   Filename Expansion.  (line   9)
+* expansion, parameter:                  Shell Parameter Expansion.
+                                                              (line   6)
+* expansion, pathname:                   Filename Expansion.  (line   9)
+* expansion, tilde:                      Tilde Expansion.     (line   6)
+* expressions, arithmetic:               Shell Arithmetic.    (line   6)
+* expressions, conditional:              Bash Conditional Expressions.
+                                                              (line   6)
+* field:                                 Definitions.         (line  30)
+* filename:                              Definitions.         (line  35)
+* filename expansion:                    Filename Expansion.  (line   9)
+* foreground:                            Job Control Basics.  (line   6)
+* functions, shell:                      Shell Functions.     (line   6)
+* history builtins:                      Bash History Builtins.
+                                                              (line   6)
+* history events:                        Event Designators.   (line   8)
+* history expansion:                     History Interaction. (line   6)
+* history list:                          Bash History Facilities.
+                                                              (line   6)
+* History, how to use:                   A Programmable Completion Example.
+                                                              (line 113)
+* identifier:                            Definitions.         (line  51)
+* initialization file, readline:         Readline Init File.  (line   6)
+* installation:                          Basic Installation.  (line   6)
+* interaction, readline:                 Readline Interaction.
+                                                              (line   6)
+* interactive shell:                     Invoking Bash.       (line 131)
+* interactive shell <1>:                 Interactive Shells.  (line   6)
+* internationalization:                  Locale Translation.  (line   6)
+* job:                                   Definitions.         (line  38)
+* job control:                           Definitions.         (line  42)
+* job control <1>:                       Job Control Basics.  (line   6)
+* kill ring:                             Readline Killing Commands.
+                                                              (line  18)
+* killing text:                          Readline Killing Commands.
+                                                              (line   6)
+* localization:                          Locale Translation.  (line   6)
+* login shell:                           Invoking Bash.       (line 128)
+* matching, pattern:                     Pattern Matching.    (line   6)
+* metacharacter:                         Definitions.         (line  46)
+* name:                                  Definitions.         (line  51)
+* native languages:                      Locale Translation.  (line   6)
+* notation, readline:                    Readline Bare Essentials.
+                                                              (line   6)
+* operator, shell:                       Definitions.         (line  57)
+* parameter expansion:                   Shell Parameter Expansion.
+                                                              (line   6)
+* parameters:                            Shell Parameters.    (line   6)
+* parameters, positional:                Positional Parameters.
+                                                              (line   6)
+* parameters, special:                   Special Parameters.  (line   6)
+* pathname expansion:                    Filename Expansion.  (line   9)
+* pattern matching:                      Pattern Matching.    (line   6)
+* pipeline:                              Pipelines.           (line   6)
+* POSIX:                                 Definitions.         (line   9)
+* POSIX Mode:                            Bash POSIX Mode.     (line   6)
+* process group:                         Definitions.         (line  62)
+* process group ID:                      Definitions.         (line  66)
+* process substitution:                  Process Substitution.
+                                                              (line   6)
+* programmable completion:               Programmable Completion.
+                                                              (line   6)
+* prompting:                             Controlling the Prompt.
+                                                              (line   6)
+* quoting:                               Quoting.             (line   6)
+* quoting, ANSI:                         ANSI-C Quoting.      (line   6)
+* Readline, how to use:                  Job Control Variables.
+                                                              (line  23)
+* redirection:                           Redirections.        (line   6)
+* reserved word:                         Definitions.         (line  70)
+* reserved words:                        Reserved Words.      (line   6)
+* restricted shell:                      The Restricted Shell.
+                                                              (line   6)
+* return status:                         Definitions.         (line  75)
+* shell arithmetic:                      Shell Arithmetic.    (line   6)
+* shell function:                        Shell Functions.     (line   6)
+* shell script:                          Shell Scripts.       (line   6)
+* shell variable:                        Shell Parameters.    (line   6)
+* shell, interactive:                    Interactive Shells.  (line   6)
+* signal:                                Definitions.         (line  78)
+* signal handling:                       Signals.             (line   6)
+* special builtin:                       Definitions.         (line  82)
+* special builtin <1>:                   Special Builtins.    (line   6)
+* startup files:                         Bash Startup Files.  (line   6)
+* suspending jobs:                       Job Control Basics.  (line   6)
+* tilde expansion:                       Tilde Expansion.     (line   6)
+* token:                                 Definitions.         (line  86)
+* translation, native languages:         Locale Translation.  (line   6)
+* variable, shell:                       Shell Parameters.    (line   6)
+* variables, readline:                   Readline Init File Syntax.
+                                                              (line  37)
+* word:                                  Definitions.         (line  90)
+* word splitting:                        Word Splitting.      (line   6)
+* yanking text:                          Readline Killing Commands.
+                                                              (line   6)
+
+
+
+Tag Table:
+Node: Top895
+Node: Introduction2813
+Node: What is Bash?3029
+Node: What is a shell?4143
+Node: Definitions6681
+Node: Basic Shell Features9632
+Node: Shell Syntax10851
+Node: Shell Operation11877
+Node: Quoting13170
+Node: Escape Character14470
+Node: Single Quotes14955
+Node: Double Quotes15303
+Node: ANSI-C Quoting16581
+Node: Locale Translation17840
+Node: Comments18993
+Node: Shell Commands19611
+Node: Reserved Words20549
+Node: Simple Commands21305
+Node: Pipelines21959
+Node: Lists24891
+Node: Compound Commands26682
+Node: Looping Constructs27694
+Node: Conditional Constructs30189
+Node: Command Grouping41760
+Node: Coprocesses43239
+Node: GNU Parallel45142
+Node: Shell Functions49443
+Node: Shell Parameters56650
+Node: Positional Parameters61063
+Node: Special Parameters61963
+Node: Shell Expansions65187
+Node: Brace Expansion67310
+Node: Tilde Expansion70033
+Node: Shell Parameter Expansion72650
+Node: Command Substitution87779
+Node: Arithmetic Expansion89134
+Node: Process Substitution90066
+Node: Word Splitting91186
+Node: Filename Expansion93130
+Node: Pattern Matching95679
+Node: Quote Removal99665
+Node: Redirections99960
+Node: Executing Commands109530
+Node: Simple Command Expansion110200
+Node: Command Search and Execution112154
+Node: Command Execution Environment114530
+Node: Environment117514
+Node: Exit Status119173
+Node: Signals120843
+Node: Shell Scripts122810
+Node: Shell Builtin Commands125822
+Node: Bourne Shell Builtins127860
+Node: Bash Builtins148789
+Node: Modifying Shell Behavior178898
+Node: The Set Builtin179243
+Node: The Shopt Builtin189656
+Node: Special Builtins204566
+Node: Shell Variables205545
+Node: Bourne Shell Variables205982
+Node: Bash Variables208086
+Node: Bash Features240720
+Node: Invoking Bash241733
+Node: Bash Startup Files247746
+Node: Interactive Shells252849
+Node: What is an Interactive Shell?253259
+Node: Is this Shell Interactive?253908
+Node: Interactive Shell Behavior254723
+Node: Bash Conditional Expressions258237
+Node: Shell Arithmetic262814
+Node: Aliases265754
+Node: Arrays268374
+Node: The Directory Stack274383
+Node: Directory Stack Builtins275167
+Node: Controlling the Prompt278135
+Node: The Restricted Shell281085
+Node: Bash POSIX Mode283679
+Node: Shell Compatibility Mode294715
+Node: Job Control301371
+Node: Job Control Basics301831
+Node: Job Control Builtins306827
+Node: Job Control Variables312227
+Node: Command Line Editing313383
+Node: Introduction and Notation315054
+Node: Readline Interaction316677
+Node: Readline Bare Essentials317868
+Node: Readline Movement Commands319651
+Node: Readline Killing Commands320611
+Node: Readline Arguments322529
+Node: Searching323573
+Node: Readline Init File325759
+Node: Readline Init File Syntax327018
+Node: Conditional Init Constructs347556
+Node: Sample Init File351752
+Node: Bindable Readline Commands354876
+Node: Commands For Moving356080
+Node: Commands For History358131
+Node: Commands For Text362924
+Node: Commands For Killing366573
+Node: Numeric Arguments369606
+Node: Commands For Completion370745
+Node: Keyboard Macros374936
+Node: Miscellaneous Commands375623
+Node: Readline vi Mode381307
+Node: Programmable Completion382214
+Node: Programmable Completion Builtins389994
+Node: A Programmable Completion Example400689
+Node: Using History Interactively405936
+Node: Bash History Facilities406620
+Node: Bash History Builtins409625
+Node: History Interaction414354
+Node: Event Designators417974
+Node: Word Designators419328
+Node: Modifiers421088
+Node: Installing Bash422899
+Node: Basic Installation424036
+Node: Compilers and Options427294
+Node: Compiling For Multiple Architectures428035
+Node: Installation Names429728
+Node: Specifying the System Type430546
+Node: Sharing Defaults431262
+Node: Operation Controls431935
+Node: Optional Features432893
+Node: Reporting Bugs443411
+Node: Major Differences From The Bourne Shell444605
+Node: GNU Free Documentation License461457
+Node: Indexes486634
+Node: Builtin Index487088
+Node: Reserved Word Index493915
+Node: Variable Index496363
+Node: Function Index512260
+Node: Concept Index525770
+
+End Tag Table
+
+
+Local Variables:
+coding: utf-8
+End:
diff --git a/doc/bashref.pdf b/doc/bashref.pdf
new file mode 100644
index 0000000..50b64fb
--- /dev/null
+++ b/doc/bashref.pdf
diff --git a/doc/bashref.ps b/doc/bashref.ps
new file mode 100644
index 0000000..0ef38c1
--- /dev/null
+++ b/doc/bashref.ps
@@ -0,0 +1,21959 @@
+%!PS-Adobe-2.0
+%%Creator: dvips(k) 2020.1 Copyright 2020 Radical Eye Software
+%%Title: bashref.dvi
+%%CreationDate: Wed Nov 18 20:13:07 2020
+%%Pages: 189
+%%PageOrder: Ascend
+%%BoundingBox: 0 0 612 792
+%%DocumentFonts: CMBX12 CMR10 CMTT10 CMSL10 CMSY10 CMMI12 CMMI10 CMCSC10
+%%+ CMTI10 CMSLTT10 SFRM1095 CMTT12 CMTT9 CMMI9 CMR9 SFRM1440
+%%DocumentPaperSizes: Letter
+%%EndComments
+%DVIPSWebPage: (www.radicaleye.com)
+%DVIPSCommandLine: dvips -D 600 -t letter -o bashref.ps bashref.dvi
+%DVIPSParameters: dpi=600
+%DVIPSSource:  TeX output 2020.11.18:1513
+%%BeginProcSet: tex.pro 0 0
+%!
+/TeXDict 300 dict def TeXDict begin/N{def}def/B{bind def}N/S{exch}N/X{S
+N}B/A{dup}B/TR{translate}N/isls false N/vsize 11 72 mul N/hsize 8.5 72
+mul N/landplus90{false}def/@rigin{isls{[0 landplus90{1 -1}{-1 1}ifelse 0
+0 0]concat}if 72 Resolution div 72 VResolution div neg scale isls{
+landplus90{VResolution 72 div vsize mul 0 exch}{Resolution -72 div hsize
+mul 0}ifelse TR}if Resolution VResolution vsize -72 div 1 add mul TR[
+matrix currentmatrix{A A round sub abs 0.00001 lt{round}if}forall round
+exch round exch]setmatrix}N/@landscape{/isls true N}B/@manualfeed{
+statusdict/manualfeed true put}B/@copies{/#copies X}B/FMat[1 0 0 -1 0 0]
+N/FBB[0 0 0 0]N/nn 0 N/IEn 0 N/ctr 0 N/df-tail{/nn 8 dict N nn begin
+/FontType 3 N/FontMatrix fntrx N/FontBBox FBB N string/base X array
+/BitMaps X/BuildChar{CharBuilder}N/Encoding IEn N end A{/foo setfont}2
+array copy cvx N load 0 nn put/ctr 0 N[}B/sf 0 N/df{/sf 1 N/fntrx FMat N
+df-tail}B/dfs{div/sf X/fntrx[sf 0 0 sf neg 0 0]N df-tail}B/E{pop nn A
+definefont setfont}B/Cw{Cd A length 5 sub get}B/Ch{Cd A length 4 sub get
+}B/Cx{128 Cd A length 3 sub get sub}B/Cy{Cd A length 2 sub get 127 sub}
+B/Cdx{Cd A length 1 sub get}B/Ci{Cd A type/stringtype ne{ctr get/ctr ctr
+1 add N}if}B/CharBuilder{save 3 1 roll S A/base get 2 index get S
+/BitMaps get S get/Cd X pop/ctr 0 N Cdx 0 Cx Cy Ch sub Cx Cw add Cy
+setcachedevice Cw Ch true[1 0 0 -1 -.1 Cx sub Cy .1 sub]{Ci}imagemask
+restore}B/D{/cc X A type/stringtype ne{]}if nn/base get cc ctr put nn
+/BitMaps get S ctr S sf 1 ne{A A length 1 sub A 2 index S get sf div put
+}if put/ctr ctr 1 add N}B/I{cc 1 add D}B/bop{userdict/bop-hook known{
+bop-hook}if/SI save N @rigin 0 0 moveto/V matrix currentmatrix A 1 get A
+mul exch 0 get A mul add .99 lt{/QV}{/RV}ifelse load def pop pop}N/eop{
+SI restore userdict/eop-hook known{eop-hook}if showpage}N/@start{
+userdict/start-hook known{start-hook}if pop/VResolution X/Resolution X
+1000 div/DVImag X/IEn 256 array N 2 string 0 1 255{IEn S A 360 add 36 4
+index cvrs cvn put}for pop 65781.76 div/vsize X 65781.76 div/hsize X}N
+/dir 0 def/dyy{/dir 0 def}B/dyt{/dir 1 def}B/dty{/dir 2 def}B/dtt{/dir 3
+def}B/p{dir 2 eq{-90 rotate show 90 rotate}{dir 3 eq{-90 rotate show 90
+rotate}{show}ifelse}ifelse}N/RMat[1 0 0 -1 0 0]N/BDot 260 string N/Rx 0
+N/Ry 0 N/V{}B/RV/v{/Ry X/Rx X V}B statusdict begin/product where{pop
+false[(Display)(NeXT)(LaserWriter 16/600)]{A length product length le{A
+length product exch 0 exch getinterval eq{pop true exit}if}{pop}ifelse}
+forall}{false}ifelse end{{gsave TR -.1 .1 TR 1 1 scale Rx Ry false RMat{
+BDot}imagemask grestore}}{{gsave TR -.1 .1 TR Rx Ry scale 1 1 false RMat
+{BDot}imagemask grestore}}ifelse B/QV{gsave newpath transform round exch
+round exch itransform moveto Rx 0 rlineto 0 Ry neg rlineto Rx neg 0
+rlineto fill grestore}B/a{moveto}B/delta 0 N/tail{A/delta X 0 rmoveto}B
+/M{S p delta add tail}B/b{S p tail}B/c{-4 M}B/d{-3 M}B/e{-2 M}B/f{-1 M}
+B/g{0 M}B/h{1 M}B/i{2 M}B/j{3 M}B/k{4 M}B/w{0 rmoveto}B/l{p -4 w}B/m{p
+-3 w}B/n{p -2 w}B/o{p -1 w}B/q{p 1 w}B/r{p 2 w}B/s{p 3 w}B/t{p 4 w}B/x{
+0 S rmoveto}B/y{3 2 roll p a}B/bos{/SS save N}B/eos{SS restore}B end
+
+%%EndProcSet
+%%BeginProcSet: cm-super-t1.enc 0 0
+% This file is generated from `T1uni.map' and `glyphlist.txt', `gl-other.txt'
+%
+% LIGKERN hyphen hyphen =: endash ; endash hyphen =: emdash ;
+% LIGKERN quoteleft quoteleft =: quotedblleft ;
+% LIGKERN quoteright quoteright =: quotedblright ;
+% LIGKERN comma comma =: quotedblbase ; less less =: guillemotleft ;
+% LIGKERN greater greater =: guillemotright ;
+% LIGKERN f f =: ff ; f i =: fi ; f l =: fl ; ff i =: ffi ; ff l =: ffl ;
+%
+% LIGKERN space {} * ; * {} space ; zero {} * ; * {} zero ;
+% LIGKERN one {} * ; * {} one ; two {} * ; * {} two ;
+% LIGKERN three {} * ; * {} three ; four {} * ; * {} four ;
+% LIGKERN five {} * ; * {} five ; six {} * ; * {} six ;
+% LIGKERN seven {} * ; * {} seven ; eight {} * ; * {} eight ;
+% LIGKERN nine {} * ; * {} nine ;
+%
+/T1Encoding [
+% 0x00
+/grave
+/acute
+/circumflex
+/tilde
+/dieresis
+/hungarumlaut
+/ring
+/caron
+/breve
+/macron
+/dotaccent
+/cedilla
+/ogonek
+/quotesinglbase
+/guilsinglleft
+/guilsinglright
+% 0x10
+/quotedblleft
+/quotedblright
+/quotedblbase
+/guillemotleft
+/guillemotright
+/endash
+/emdash
+/afii61664
+/perthousandzero % PERTHOUSAND ZERO
+/dotlessi
+/dotlessj
+/ff
+/fi
+/fl
+/ffi
+/ffl
+% 0x20
+/uni2423
+/exclam
+/quotedbl
+/numbersign
+/dollar
+/percent
+/ampersand
+/quoteright
+/parenleft
+/parenright
+/asterisk
+/plus
+/comma
+/hyphen
+/period
+/slash
+% 0x30
+/zero
+/one
+/two
+/three
+/four
+/five
+/six
+/seven
+/eight
+/nine
+/colon
+/semicolon
+/less
+/equal
+/greater
+/question
+% 0x40
+/at
+/A
+/B
+/C
+/D
+/E
+/F
+/G
+/H
+/I
+/J
+/K
+/L
+/M
+/N
+/O
+% 0x50
+/P
+/Q
+/R
+/S
+/T
+/U
+/V
+/W
+/X
+/Y
+/Z
+/bracketleft
+/backslash
+/bracketright
+/asciicircum
+/underscore
+% 0x60
+/quoteleft
+/a
+/b
+/c
+/d
+/e
+/f
+/g
+/h
+/i
+/j
+/k
+/l
+/m
+/n
+/o
+% 0x70
+/p
+/q
+/r
+/s
+/t
+/u
+/v
+/w
+/x
+/y
+/z
+/braceleft
+/bar
+/braceright
+/asciitilde
+/hyphen.alt % HANGING HYPHEN
+% 0x80
+/Abreve
+/Aogonek
+/Cacute
+/Ccaron
+/Dcaron
+/Ecaron
+/Eogonek
+/Gbreve
+/Lacute
+/Lcaron
+/Lslash
+/Nacute
+/Ncaron
+/Eng
+/Ohungarumlaut
+/Racute
+% 0x90
+/Rcaron
+/Sacute
+/Scaron
+/Scedilla
+/Tcaron
+/Tcommaaccent
+/Uhungarumlaut
+/Uring
+/Ydieresis
+/Zacute
+/Zcaron
+/Zdotaccent
+/IJ
+/Idotaccent
+/dcroat
+/section
+% 0xA0
+/abreve
+/aogonek
+/cacute
+/ccaron
+/dcaron
+/ecaron
+/eogonek
+/gbreve
+/lacute
+/lcaron
+/lslash
+/nacute
+/ncaron
+/eng
+/ohungarumlaut
+/racute
+% 0xB0
+/rcaron
+/sacute
+/scaron
+/scedilla
+/tcaron
+/tcommaaccent
+/uhungarumlaut
+/uring
+/ydieresis
+/zacute
+/zcaron
+/zdotaccent
+/ij
+/exclamdown
+/questiondown
+/sterling
+% 0xC0
+/Agrave
+/Aacute
+/Acircumflex
+/Atilde
+/Adieresis
+/Aring
+/AE
+/Ccedilla
+/Egrave
+/Eacute
+/Ecircumflex
+/Edieresis
+/Igrave
+/Iacute
+/Icircumflex
+/Idieresis
+% 0xD0
+/Eth
+/Ntilde
+/Ograve
+/Oacute
+/Ocircumflex
+/Otilde
+/Odieresis
+/OE
+/Oslash
+/Ugrave
+/Uacute
+/Ucircumflex
+/Udieresis
+/Yacute
+/Thorn
+/SS % Germandbls
+% 0xE0
+/agrave
+/aacute
+/acircumflex
+/atilde
+/adieresis
+/aring
+/ae
+/ccedilla
+/egrave
+/eacute
+/ecircumflex
+/edieresis
+/igrave
+/iacute
+/icircumflex
+/idieresis
+% 0xF0
+/eth
+/ntilde
+/ograve
+/oacute
+/ocircumflex
+/otilde
+/odieresis
+/oe
+/oslash
+/ugrave
+/uacute
+/ucircumflex
+/udieresis
+/yacute
+/thorn
+/germandbls % or /germandbls.alt
+] def
+
+%%EndProcSet
+%%BeginProcSet: texps.pro 0 0
+%!
+TeXDict begin/rf{findfont dup length 1 add dict begin{1 index/FID ne 2
+index/UniqueID ne and{def}{pop pop}ifelse}forall[1 index 0 6 -1 roll
+exec 0 exch 5 -1 roll VResolution Resolution div mul neg 0 0]FontType 0
+ne{/Metrics exch def dict begin Encoding{exch dup type/integertype ne{
+pop pop 1 sub dup 0 le{pop}{[}ifelse}{FontMatrix 0 get div Metrics 0 get
+div def}ifelse}forall Metrics/Metrics currentdict end def}{{1 index type
+/nametype eq{exit}if exch pop}loop}ifelse[2 index currentdict end
+definefont 3 -1 roll makefont/setfont cvx]cvx def}def/ObliqueSlant{dup
+sin S cos div neg}B/SlantFont{4 index mul add}def/ExtendFont{3 -1 roll
+mul exch}def/ReEncodeFont{CharStrings rcheck{/Encoding false def dup[
+exch{dup CharStrings exch known not{pop/.notdef/Encoding true def}if}
+forall Encoding{]exch pop}{cleartomark}ifelse}if/Encoding exch def}def
+end
+
+%%EndProcSet
+%%BeginFont: SFRM1440
+%!FontType1-1.0: SFRM1440 0.3
+%%CreationDate: Wed Sep 12 2001
+% Copyright (c) 2001 Vladimir Volovich <vvv@vsu.ru>.
+% See the file COPYING (GNU General Public License) for license conditions.
+% Converted from METAFONT EC/TC and LH fonts:
+% ecrm1440, tcrm1440, larm1440, lbrm1440, lcrm1440, rxrm1440.
+11 dict begin
+/FontInfo 6 dict dup begin
+/version (0.3) def
+/FullName (Computer Modern Roman) def
+/FamilyName (Computer Modern) def
+/ItalicAngle 0 def
+/isFixedPitch false def
+/Weight (Medium) def
+end readonly def
+/FontName /SFRM1440 def
+/Encoding StandardEncoding def
+/PaintType 0 def
+/FontType 1 def
+/FontMatrix [0.001 0 0 0.001 0 0] def
+/FontBBox{-178 -319 1370 944}readonly def
+currentdict end
+currentfile eexec
+D9D66F633B846A97B686A97E45A3D0AA052BD0CE60552BD63101D7CDBEEF5B11
+69C468645FE4ED1AF2541AA0770C1DCF81623DE0ECDF49F2B522618F650CE6CB
+CC8C21885DD61AF8A523AA677EAEDDFA51A1F9B1885EEE0456196D634E04EF89
+F17499DAD982502ACC349B9EEAAE4A71A73D1147318C60A8BAC10510DE90D8D3
+F46E47295D27129A5AFE0C65E22BAD10D06885A2EE623FF8E1D90287A083E00C
+EF25195F68A2A98170E4875AA6B96583CD5632BAD9EB3D511DF934CD36447A31
+D420FA313B5721C37085F478B27E13191957AD30B8B082BCE733AF8402AA3B7D
+EC69807BBAA8142AF1CE151D99F5A59AD18798F94781EFAD48BEC8C62C05C56A
+336D71AB584F6DF014C56523108606FADE931125496247870E980A65AB33C0C6
+D5B074864D0F58CBE333EFA1201AF335FBDBFB1CC8B1294856C250F222BFB8BE
+5DE74F808904F7678552F213C674497F829E96812D340939F73737731D289801
+54E5A8F7F5067ACD9D768F4649B51E54513F2F7878141FC719627C23FC5FBBB6
+3F663343D902E95C56C559B588088227B22378FAAB29392FA62933283D2FB2EA
+FDAEC6C1A94ABA0B5BEFA1E728A2052434BFBF6D9759D02A2C6092D4EF794241
+CC28BC939A424AFA193F96530985EE89E2731F6A99BC84C6551A3FEA1342509D
+D389F786C8EAF972B8C98B79003B6C71E6696518BE4CAD2A317C5D29621031B4
+00A035445D8CFB67D6C136B3F6D82396E11A3679BC82498519C27601236F1FCA
+073DA7817B529424CAF49A0AEE8FF7520C0F204A3B1725F46C2C6953C20E93B6
+2F3EED0EEDF87A350CB841516107D9571503A3D62A2F81840070D43392160783
+D111F3463760EBE634515DA1A1B6C3A5D14FC475F277BAC792FB69B4219E9BF5
+E6F8520584096A7B7BFE439A1604C2BBBB9140A4F4728B4B553A27E1AF52181D
+701E90C4FBB16EA8DB39B562E5A2932D45893081D52E020A1FCBC44DC204F4A5
+BEE47F9D25876644CC856B1FC225B61124B89B896C39CDAB0ACCA8277F827382
+6F58A0C8456DC41217219D894B42968FB2EC75D5518B6C4413BAC889532F0B0B
+A8D728949CEA00D4A1FD757B3A2336D472842ACF8EB9869044947C67D9AC7BBF
+7386DDE209A8DC9F18085952818F67FDC6088D9C8BC51BA6DC0FA37A0F81EDB8
+6F259FA8C0FA3D55BC44529889E72E407C89ACF658631A0508FD7991088644B4
+C958031B52421F9CE73A0479A3175231EFD9E0F7A7B08380E9BAF015730B175B
+93C380D1D0F3EB929B7182691BE7E2116CE295CA4331ABD7ECAD7D2DD46FE3E0
+5D3893ED100135901FD42B4E11BEB2689A13E86F1E68635DD81E5A720082E802
+89B440A111B2CDC6BFE79E5B2EB0C528FA0E958F0E981EC29C3B02A9186D7907
+A0CC29251E567958BA95DE609A421581433DD50AF96A82A5ADEFD1C9540D87A8
+D74A7709AF84AD36753784ED8267D3C2521A32C7A9D5BE01E0AF3B349200639C
+90C8BF2E26920AC410A9C5D1EB85C0ADD16BAA83B6C0BFE82483D3B719DC19AC
+89155140691E3E37F861C53A6F39441B5F229828B198DF5BF6286060DCB64433
+F43499E4AB973F84655311A644ED0921B41B9AE7A8060CB1F45E824FB3497C63
+0A13CB5902294E66186E4496A825447734DF4AB581803488B912E7DCD6007527
+B4CFDC5AD5D1DB430007AE929F969EE332CCF235DAF977D387E47BE0EE337118
+8CFAAC0907E16B0BEAECC3B39221867AE6464BE9AB4CE591B2E24B45AD2C70E2
+A183065810D6AC3DE8EA9F66615113F1E683A4475CE5817491ECBDD4A4818AED
+EAFEAB8B93FBDB335D02FAF9276958EFAEE1057C45D313419D195068076D77B2
+C0FF6EA8D6F3F0A899D17E04B8B2141EE335
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+cleartomark
+%%EndFont 
+%%BeginFont: CMR9
+%!PS-AdobeFont-1.0: CMR9 003.002
+%%Title: CMR9
+%Version: 003.002
+%%CreationDate: Mon Jul 13 16:17:00 2009
+%%Creator: David M. Jones
+%Copyright: Copyright (c) 1997, 2009 American Mathematical Society
+%Copyright: (<http://www.ams.org>), with Reserved Font Name CMR9.
+% This Font Software is licensed under the SIL Open Font License, Version 1.1.
+% This license is in the accompanying file OFL.txt, and is also
+% available with a FAQ at: http://scripts.sil.org/OFL.
+%%EndComments
+FontDirectory/CMR9 known{/CMR9 findfont dup/UniqueID known{dup
+/UniqueID get 5000792 eq exch/FontType get 1 eq and}{pop false}ifelse
+{save true}{false}ifelse}{false}ifelse
+11 dict begin
+/FontType 1 def
+/FontMatrix [0.001 0 0 0.001 0 0 ]readonly def
+/FontName /CMR9 def
+/FontBBox {-39 -250 1036 750 }readonly def
+/PaintType 0 def
+/FontInfo 9 dict dup begin
+/version (003.002) readonly def
+/Notice (Copyright \050c\051 1997, 2009 American Mathematical Society \050<http://www.ams.org>\051, with Reserved Font Name CMR9.) readonly def
+/FullName (CMR9) readonly def
+/FamilyName (Computer Modern) readonly def
+/Weight (Medium) readonly def
+/ItalicAngle 0 def
+/isFixedPitch false def
+/UnderlinePosition -100 def
+/UnderlineThickness 50 def
+end readonly def
+/Encoding 256 array
+0 1 255 {1 index exch /.notdef put} for
+dup 12 /fi put
+dup 44 /comma put
+dup 48 /zero put
+dup 49 /one put
+dup 50 /two put
+dup 51 /three put
+dup 52 /four put
+dup 53 /five put
+dup 54 /six put
+dup 55 /seven put
+dup 56 /eight put
+dup 57 /nine put
+dup 65 /A put
+dup 66 /B put
+dup 67 /C put
+dup 68 /D put
+dup 72 /H put
+dup 73 /I put
+dup 76 /L put
+dup 77 /M put
+dup 78 /N put
+dup 79 /O put
+dup 80 /P put
+dup 82 /R put
+dup 83 /S put
+dup 88 /X put
+dup 97 /a put
+dup 98 /b put
+dup 99 /c put
+dup 100 /d put
+dup 101 /e put
+dup 102 /f put
+dup 103 /g put
+dup 104 /h put
+dup 105 /i put
+dup 106 /j put
+dup 107 /k put
+dup 108 /l put
+dup 109 /m put
+dup 110 /n put
+dup 111 /o put
+dup 112 /p put
+dup 113 /q put
+dup 114 /r put
+dup 115 /s put
+dup 116 /t put
+dup 117 /u put
+dup 118 /v put
+dup 119 /w put
+dup 120 /x put
+dup 121 /y put
+dup 122 /z put
+readonly def
+currentdict end
+currentfile eexec
+D9D66F633B846AB284BCF8B0411B772DE5CE3DD325E55798292D7BD972BD75FA
+0E079529AF9C82DF72F64195C9C210DCE34528F540DA1FFD7BEBB9B40787BA93
+51BBFB7CFC5F9152D1E5BB0AD8D016C6CFA4EB41B3C51D091C2D5440E67CFD71
+7C56816B03B901BF4A25A07175380E50A213F877C44778B3C5AADBCC86D6E551
+E6AF364B0BFCAAD22D8D558C5C81A7D425A1629DD5182206742D1D082A12F078
+0FD4F5F6D3129FCFFF1F4A912B0A7DEC8D33A57B5AE0328EF9D57ADDAC543273
+C01924195A181D03F5054A93B71E5065F8D92FE23794D2DB9AF72336CC4AD340
+15A449513D5F74BFB9A68ABC471020464E3E6E33008238B123DEDE18557D712E
+ED5223722892A4DAC477120B8C9F3FE3FD334EACD3E8AABDC3C967C61FF003B4
+B10C56D6A490CE9594D57A2D431B9E5E10FE3D8832E227A7087611431ABCD029
+85F4865E17E17F8CFBD2CADC97E0A8820E3ACEC873F31464466A9545E967E53C
+DBDDB8478E69063FBB891566BAF88B7660A4405B16834761F041CCF7650AF955
+F9E853AA9F5F4382E1FE7D0C5BB4023818A2383F91249D48CE021250EC9EEB1D
+2835E18FB73026250B32A8849067D5E2258797C917F998F2D4121D96560C5FB5
+B5D3471216639A8671B6DFAC5E3554EC36D9A72518525A795590C74DD70DA3A7
+78BFC43E51D6F2BA52F17D4DD00D389D3983EC54912AFF73684A8A7E345537B7
+E62361C04A47859DA084BC72EA53512DC54132EB2EE671793603015652EAFDE3
+41C4B6B679BD60AEC5153EA0D2200CB1D097DAD770F5F31E6FC475A225995277
+B867B731D5401E2D02B85BA85158C80FF7E2BBCC42B98AC867E67D25DB656072
+55A0D32AB7AA483A5A9686CEA4E2B3031D90D84DB3E2DEE7706C91BA81CB8DAA
+700E5F61E07D6998C9552C81B66FD10A10033D49EF3BCB0FF22ED0A3737523C9
+8F851C61C4BF8A213BF6EC70C956AE48B5BD276CC0437C72BF6515B10739919A
+F00F6ADD2798CB211668842349171A5AEB0664D2C44397E55A4A9EBDF54A3EF4
+FBBCDAD9DAEF4B0CAEF7112FA828F2F8D9F633D37E5516AB5ECEA87342EF8DC4
+3A50548490F5BC9A8A1F98AC7AEAD9D913BFA10CA86D73AEB5BACC1FEEFDCC15
+B3655522CCA2C772E902FAB2A6FC153597D52763EB44AB7489FF061F7F58E8F2
+AEAAF4D17F36CBFC00D3C653F335D14240C87DB4339DA9D30A5BD1F502BC9013
+461B9DB2FBEEC01BB18990439A0E9CA6576BC9CF6B1A3DB9386C4A5D4AA6A5DC
+CFA45FB75F22E10ECB72565DB441A194902C91427B4F676E531C661F7A2C3C85
+CD534D1C89B6779B2EDC8E44667B992C20C70B663BFBF680A6CF4383EB7CA26C
+4D1F06B5EF4025BBE65795F1EDB5CCB97050872D6C07BC2974F905ACDB7A765F
+291365D6C8152153E7F017A25FB4476C60FD9EAF9A121633DBEAC32F62850223
+D6418566AB350F90F4B35F19598478F76B63E347D4C61E203D4DB8ECB9889181
+C387F4B663A502C638761D2782BB96EAC81A0108D7BD6938F67FEBB69218D115
+D8E89CFABCE15C6ACC7FEB983332A51A6A73CF4E341574F366713D7FB29956D9
+9BF238A87483D37E526A2EA2F101EDD34E34CB92730DCA7235AA0027189BE405
+2DAB4AA021A30C28B26C50808E1E965C02F6212EC7C72F5683339425A7739380
+A422E6191ED8453AF0CAAA424AE44DFA7CC5C2F6EAA8D73A5101D8E9517DBCFB
+2858D0E8ECB7DC430EF23A9E4428CB7DED8D035D6050251AC101A2D0E884721E
+2F21E573F948048BB8FF888911C508CC198BD750083B339500C426AFCD5634A6
+AAAC1C7E91249667B231BBFC64B4317192FE07FE9DA0DDB5E517D097AAE46577
+9555F29D45C67CDE9812CAD03F220B20519F2FF32DCA56A554D4296FE2D1F3FB
+B209B5270E0E695EA5A0EF1144957CE045881AEB8D05D72CE57F4D34617AED67
+0D3AF0472CD8D60933651626550366E300E72A9C89ACD475C2E2ED9BD44B472D
+9DAFE943F8E02A6DC38E447EED964624C37C3130E48211CA279BB6A0BD59466B
+42F3D89B5746F29E084E22CF58395AF0F29E55113F3A3F2F52CB3A6DF3D026D0
+C81754B8E2E4A15F6943BE9D0087D5166060734FD07C4C57D7C7D90E8C9C1F35
+623CEEE3ABAE75E1A18A1E3B50B7266BD2D8E812CFEB4A46B856885B185640D6
+B9C22179551002B94282F57FB433B7FF157D2F0D240836B72AF4A331668AE5D4
+E6B85415F4E8B9D2F9AF90FAFAA0A3866DF417CA5A31348CF9B41B8F5F4D2F97
+CCF7ADE851B5E2E2F6E319AAF5792EBB9DA2C6AA8B73D889F3CDAA42932CDA7D
+07A7E59183CD89520DDFC36E5D513BFD8AD0886046585F29B4D7F42CC0C27AA7
+53915AB1167D292FE91957E94A57FEE2D49C20C9070ECD736BDEE0F046E60350
+EA539DC298156A4E0D019E7D481FDDA6861E20678516AB80ABEC1F09B126BCB9
+52E8272A06BB6DD87ACFC423B4A4FC9A3DC8DCAEBB807C5F748F1FF8B17B8B88
+F426206BF1B7B7D239D26BC3CF0776C467A98CFBBCA5FB6145D5900137ED19DC
+D002F10704AA680EC753C22E29AAB15712EF22AF73D80820A1EEE953463D4EA3
+81FAF99518D4FD0F862A324FC44C4B9542A92C5B60CC983CC8F647CE5BDB4D6D
+B92B380E0E5F7208A9CD91FA9A469548162C761C1BA05AC9D60B766764D821B6
+B4E17F56CE455F06EA1EE2D38FE47581746C4C5FBA63AEE2B58E877D1A8FA83A
+31C972D53B64E92EEEA147426A92CFBF76FC614119C6E9C6476FD6A069C803BF
+E949FBE50B5AB1F1463F9747E8D353F7BBD991C4F90F920BC9407D8E24720293
+846D052214E60390C3CB926D38C83AF697425D80C2B4FC4706615B905516B733
+46ACA325CEA68FB21B2D17CF0B68BA4DF249368625CF83441EDBF2B86C957C1E
+44CD722BD2537CE84FBA07EC7AE15C840041B9F7F3040072E6084CD55B301C08
+A64A53BD4D3DC30DCAC6C152F316ABC59B8EE978793EBD568849DCC2A75A495A
+BC83470D503F8E389F54B4A4A31624E83C601B43AC1E52CB811FAA7CA6B644A5
+1AE0BFD4FC774C9C9DFC2769ABFA9C83F900BE2DD4010416053A1D4874E6ECF4
+D86E44B4CAB15D53E5630C144B0C15B58DAAD785BA298B1893D1B09BA5D40344
+6678FD2D17FF6674433C976D6DAC659175CED26139967C9B2B9CFFD78FC2570A
+E5142141C2888DBF2DC8503F9137CE7CB21A1EBC2D65BF33FCEFBC85C9CB736E
+24E8595CE934AB032CC70BD6A3B0F3BDBFBBE185512FDB7BE3D4A6620478453E
+75D044BF770B44C9741E31985E6DAF5A318D7BED12B02A4BCFE60D25EF12843D
+EFC9BAE2A3F2EFAD66D7858E83EB46BB09D2FF8AE9C43844A7001C86ED97AF51
+C511E3A89A1BE349FF5215D1A57843EF51456B9838133846F19BE79AAA5C1AB0
+5F400E5E8E7B0BF96EFCA3B8F0894BE589F2C9FB6C97BD16D38F0A237CD4F034
+099C41F85C7E2C7BEC8E02C4F327306A53B4B48B26A8926670CEEF96F6DF2281
+7C2DAD99EF8B81BBB777227C2475AE7400DC393D9C0445E925DB1E955950F7AE
+53E9AC4306794239346A419F7B5DF4168382EF5956B81F83BD4BB7635B3BCC84
+7D84D05AEDC02D14675D777CD19B08124001A4F4EA96990D96000C082A12F00F
+7FEF793A7FA69D56D3A38D012168C5458B667190AFE80E02C816CAFF0A71953C
+D80B085CD286027E2FDBB05452AA762FD7C813B2E19A79C74190E04E746C4933
+CE1E300CAF5DD53B08110509BDA404EF07FA1BC5224BF1205DE8E0C3276A13DD
+866675103B960C5F36644F96B4FAC16F5D6E91F74629B318FCCC8E8CB13EB76B
+B0B7B90718D913A52A04732EA3667674994A325A7973C601A7DDD50F658E0826
+ACB8E53D4914B0274AED98D7BC3B2B7F9D48A7ECC2F8ABEE05CF2C4F2B90360B
+B7DF779EAF3E103D1D83EDBE32DDA873768D8C37DC10A5354A94B4153049AD64
+FF3E0BB51AB91D7C0B4134D8731CD0270DAAF19BED9EAD800A14B65B68EEE89B
+40DD624111670DDC7C030DEFE0D1B96420E249332445C155BA96231C88E70643
+D526BDF3CA1E05FEE72CE2B881CFC01ED780C10E89F0828AD55FE29043BC56E8
+2750A6DD15AADD54492F6092618F4CC6A31766B17FC60766D18C307EFC9BB787
+39047DAD6B38419EFBA46B4E2C932F97451FE78AD75FA90DE409FC6DD46585D2
+1941F5ED47A8FBAEF5A917A240959E8D9F9917DEA3247D9CAE6BF7A88DB4C4A4
+F9F5A6DCE542420A032FF3392FE0F3357B51F884D6181583A554F75B1DF192E9
+253CC828FF06B0D992D5316435980B044BB191508C7C45CD90F797F88856424B
+14A5707459C50EDCF3E3D8D1667AAA83015405354CE744C66D9A5728F29E0085
+6DBF740717FA0799E3BCC4ED7841588B496A5E549B953A7FD288B4A045DB611E
+E3B2F35963FF18ACCB1C968BEEA2CBF52B3999AAF89A05320BB2E97F52CFE06B
+9F10E3A79865A3059A957F97972D80ADF678A36E2B586C101FC6AFA4D137C13E
+EE7102C9B8EF78CB057F8B7476F146E8FF5C897FD5503DD198128CFF7B5FB339
+FAD0AF0EA967F77B07B367A4AC9F668F8BED99B98E87FAC750EE045602D76C3F
+289FC9D97694C96AAC0AD1BD3FA94DF2CBCEA24B40F47B9B59E54EECEE7AC4C3
+A3F5D19160E4C1EA830D57FBE10D8D46AC5CA0260F22FAA45236F0F542BEA9C5
+5A88F878F68B36114E0573900C65E305462B22A3429A17C7A567694414DDDA46
+5F30542B8FD4F00F6C295B2E8D3A986B953D96822DB2ECD48E8BB1763434E652
+152EF3717F5E7FA10FF0B01D9F64E22C5DBD7254629658887BACEC0ABDE972EE
+67299FB84A05B3EFE22B6976DB4CCA384232DDAE38C31623A4E39EA2E82C1EA3
+BBB68F1A7DBF405DEC37CB7203A895C36A44BD2D63F45B3888AF91D37B510A59
+3C921BB44DA620892AD87B665F69F6FA510B071ECC403CB2BE2F54B3969C9E88
+713244BC97C1466DA8216DA7600C221E7E7EF5C789D2E12B36422023A03E11BF
+2790FD6062FE6BF62F5010A92F0A104B76E255A0975E04F6F20F760881BDA7F5
+D834D1D328B6EC19AA7D5E5678A84C74C82553DBE8BB5765E84F5A8789032143
+6020940B4B8D45FC3433D356E28C25F42D0C19F911213D85951B2B00D01B77BB
+A4C72E964F9D95422BEDE582A05CD52E03D28A996E6CC8FCD910CBAB728073F9
+F9FAEED5470FFA55930447C5BA816F826F983D53EC9941EC8364B3060FD74C95
+26D4F5CA753B574FD2FA4D1D333785241D8741B79E628BC852FDC35478C5ED9A
+C1BE88C5EE7302816E65C12B58EA16FEDD4672EB3E24B6EDAD5DCE263BA8A970
+350B651E5A9F3C281D85BC3F44EADD0D93402E36489BA5185E7D388974B0B700
+70575188BB610CCA20F081E2CBDA13DCC6F72567962ADB342E02C1E763B673C5
+F7384E24C6E1730A3A790D690A2103AEF88E0C1D4480DC9B25E5C8C9E1919C95
+F83320179B4C7C4A26D559BFB24D7D596FB73758C9990C451E77FCDDD17763B8
+9C30A9534E3CB6680D3D419D4B70B0B0A0D160FCCDE169714E373F65B7144CC2
+DB9A44E041211E1517D3148E65A2486CBE5E74E625261CCF65392FB4F3091473
+F9E8DF327D59A58558E5C9F7190DB577D5DC658F5E36258291C708B3D224653D
+064BB6079F91293FC733710893AD1C96169B30CBFE4E9D52E7EFAE4AFEE68FEF
+1AFD5E7E9DFCE8DE332B0FDC0514F9B3090AC85BBFB527FD8034DD33E9576325
+A8769AE09AF1BA792447DDD932B98FC9486B39E0B04DDB3EFB7A30DA0940B33E
+E27490E0E841E87B1C90E5248A91742ABEDC10F43A8AF0F9C5B4A4930B1AADAF
+01874B9AC3B8D0DBECCDA6CD7E96471FAA15CB7F8A599C5746327CE392224C3C
+40BD60AF97BCA6FF6FCAB2FEA114D7300B89E91C3BC92D5B3E2C83BB37992D8C
+72F661EFD0AA034C738C019DFB79BF40651A1A34BC1EB9F5AAF58F8B3DA32645
+24AFF8636486F08BC21533B5FF7391B0679A78DFDCB03DAF6BB7475A1D51DAC1
+EE4BE9B986655D1FDB6936445EF99B58B303FE79F11275EEA96A9F6808EA8775
+D873D1052FAC93769789C700F20EB2ED6D15676F6E563A769CA9298E463FC311
+83281483B1C953370D196727A6A0E66D32D9480AB1B6DCA77868C1A2D5DB6483
+5F31EB6B18EEFEF1CDC31533E69B0AFC6B30FC9912DC89BAAEEADC30BE14F448
+1A6B70D36A5D9B01799BEEA686066114910842D022EB464A9A1E8F0A5628BA69
+AA9A1925CCADD44703BC67A89F3B48E4680726DC4360274185CF3C8AB747A8FC
+4B928AD62B092EFE48B01E33ED756DB696171FDB775396BBA138E056F71EDAE3
+7A1E4CC272B8418114B0E81DE0BC43DB3C133167344488820A92DF10FFA26FB9
+65FCA2C87D302E956DE6B4FE145145440C83DB43A68F8B29A592B127BDF49063
+B7F11E155CD4CAE305525BEA56B7C412A6260426407BD892A3F2B444AC3421E6
+FB6E6425EB5C3053C5644666B80405530FA0012B54557327C98E0F4F064099A6
+4ACAAFC1870359C1B6FBE7606BB8A26026AE20C212210449905E628AF1B20490
+8CE908B7EF3E3DB551C85AEB0F7FEB6A8D215B97998E5DD9C7CCFB2A9402B8B6
+1770D4023777D4B45A73F471355353412C51D4CE71FAD1E0AFBD87B5F86307F3
+10D0B94F1194EFFB64AD5DA54A4200490F609CA8B912E149F8217ABB1E9EBB3B
+C4470E7365CF5E1E761AA1945044B225BD53D142F6588C50E0644740F7DD55E4
+8F73201E5354A8BC78339211AFC4935F44701FBA043AAC4BA4698E9D7700029A
+C79F992F62627C91EB855F64C4B251718FDA71EDAF082A0C7B00550949D617A0
+7071FB14F05620CCF2180941341D8E60FC88823438FD728A4042AFA8B853107F
+852F631518B61B234565291B5D5B89DA818DEE3AE3B68A2869DFA63255CC882C
+3B16BBA08FCE3632E57FF7A07F857A1F0FDCADAB39D77960BD827CCC8661A997
+648BF5BEBC0FD2286C2A112A8DEB9CCB6330A049170D5D68EEEEA011D3EF3EBD
+855236B9380087CBBB6BE24191F728B7EAC5B50F7A547AA0989B7C7D3437DBCE
+1669341264E290646F2C8C5A3ACAAC7CB63DC692FAAE13E9B40E8BD39FE16A0C
+1660CE66872D061056C04DDDC265C024BEF8B7E3C3AEE76FE5C9702002C28BE0
+B180295EE00E567FA2E5CD1638226D24A7C732E1BD8103B476EF5702768689C7
+D4FCD47F2AB94A2B1FBAE6ABF87B09E7713C773FB65CA83F7318035B332B9F99
+24A2C8897527021321D003AAD7C273E4BFA2710B9BB26C2CFD3D9A5D7ED1096C
+552D50028AE2476FCD6D12A5D0A897521313ED1A3A8456A70C16EAA50A3E6733
+6DC89FEC56AB54A579EF264377A103939D5EE00A90B4F2206D0023AF9491FBE0
+800C6540FC945199E20E945F46CEEA2E885F6800B9DF042BCEF4291A4B1A62C8
+6A7ACFF872B25FA3AE69E0093F3D0FF13A3313430C06F1AF94D500431566F659
+E8C859A5F80F5BD2E85C8E32603D3745628E8FE6FBC50FA68F9C3811A2BEFEA4
+5852CAE2AE5AAD3230ED050593BAD0A9581EB7B327C6916B8FC348F4C23E6FA2
+00FA28AAACCB3091C1D83F7BB88672A53A2EA3B8C7C24374E400C57F0F01019F
+E52D5C47F389D4C9AF126F4080F9AB8D1C8F470932BBECCEC72A9796F6E965A4
+82057DDB43D68298A00880D4C2E2496F26F015FD83C5549215753459310339B7
+6B2961EEEE74DA31FEC8E2BDDA42D4080A32372AC372524BDDA580EF6634ACE3
+128C69D04D890DCA337212B109585C665AA83EFE47D5BABC2627A86EAD11BF7D
+744176652C7F9497785A7A06A994ED8414BBE8B26E74D48CB83FA24AAFBDD507
+84A90195EA3D77BCE8C2BEDDD1DC52E8164DF15D65B916EBDF3A8A76849653DF
+AE3CAF9561AF3B705F75B9E5DFD6758DB65A2FD54683759912E0D0035CFBCD86
+5C7018E5F1DFB86B739C4749DDCFB2F40529E1F15174DF4AE9833958B66ED869
+920CFB9524F05AB2FA84A4AC41A02490699F277A3B4ECC3C31ACF79E884B979C
+AEFF660A8EEF118C79F8DA266F89F32078B1C333DFA5264D6B64371276ED4DBD
+5A2DF213D85A56B1CA85DEA53ED0299C1FA48D463B11FC9A0751C986CAABB184
+829B1133CA8422DC11C6CEAAD463FEB468FC7AA2DDBE2E708D27D89164B12BD8
+B9A71A1D06D2FA9ED0B02168B32F6CC0FE765F2AF8A19C7196EE55648E642184
+BDF993C99EF7C10AD2A7962DB9B7851E6EE24A0C53475186BB44083AE18254B9
+F1CEA0B66A6581C81DE19DA8EEC9330A030F3384C1DF8216E5A25FB38C1B94F3
+403C3541593A016CB5FD306F41F40E82D4561EBCBF76153BDFCF338284348755
+0208360C5842FCD6B2D614387575B6E49F4B5A4DA281A352ABE8B76CFCD94A00
+1C586D19B68D965BD8D7EF0DC87271478CB4D0D1633676A2FC51B36876002A9B
+F5D632ED778BA9EA1C3741FFCC15AEEC11C8E1544DA7358473325812E50C2135
+84ECE7DCE281956681179C09C0E8DBAC5E4424AAD00FDA269BCD6412F1D6DCE0
+2BC7CABF85AE803D620F5140C63DAC4B0E5F7896343973FBB99486B93B6DB58F
+38ACBE8868CC58B3918C1AB4406FBCC7BE8496C78C9D628716BF1E306AA802D4
+5FAC522B1EE90448387DB8E85235FFAAF3754E2317B693D567A488753993B8C5
+DA3C8FA50A35202958FD0BF2900A6CE175920C2EC7CD449D4DB189A50958BF17
+644345CC38250088A694CF0F482ECC55ADCD02E17B3CCE66213A6163B8B44C9A
+89068E3B5301D2364F85BF9DF7C77342796363A7B6B294CE26DBB9179DC15756
+E1B32CE919AF44BC79A3AA8FDF6118345B2AE03F3B11D57D9AF50EBCF7152E37
+15510FBF60F16756FC674E2BF58E88CAB2CA2E8B47F50096C51179684331FD61
+8B34520C9C7D01E1511C924FA76B3CAF79501E0AA2C6E1EC6F00CB6CE24B4123
+F493B149B5A5147EF6BF1EF3CD21A76945B95082E1FB3C5A150D8AF793348E8C
+A988354FA46E3775486A6999E022EBE293E8396C8F9416929607730606CFA772
+BC8388BA5D64B79E52DD2048ABF21661121A001E6A75731B5DC43CE040396BD7
+B85603C8A0F37E522FD0CBA63C454B12960451CE65A69F98FB2FDBAE725C0999
+05FB68B4C1D320F5F3D61FA8446BE6F8BC46AD9CFA5674A3EC73B8F3419AF9EF
+7A1A3C9EDE3BD6359902D4B5F3AB4E3FF9CB2E1937937AFA182C651985703F20
+FB70E37AADED6345EF4E83CB140FF92310BACFBDA11F2CD5AD93AA7563D7426B
+0D4B6CF9B669F9A702956CA845E3814E4B5491E58F8C89714229942165A6E8E6
+58982D89C4FA7BC557214BF9ACE2C63AD88F2D1B18A04F510211687C35AA1F7F
+D2003D4E60400B95E70422024A7111D926F1B5A77074910710594B95680CFC4D
+911FC16B928D9644340A9D2382767FE6AD453E8E4CBF19F77D3DA2934B11FC95
+A6900C3CA3F2B6AE4290A005F908305CB37700680D76C4999AFE509B18305D28
+88C36292D6DA208A8D42F8B81FDEA7E93EE59D6AF3F1A3522EE91BE71BC655B9
+79C49B033A036E1FCD94FC581AE732A224F055503CFC69FBCDEA39CB00DC8A0B
+4BEFED99CFC4E44ED51DEDF9EA825FF6BB97D316726531CB4BA083B033C0B69B
+8068D5D3E3E31DED5F6267439F149549A6E12B00BA85818AEB491978364D9F7D
+7375CBD6C5511CC846D0058BD2CE5467EBCEACE5CBEB2D33AC8E12A84CA620EA
+99A0ED916B7770A056F6A9C361CD5118B5DDB10A5A4E643FFB8FC5DCBACDCB28
+696E26D030C5918548AD8B87E21E1B4BAA91AF23663CDE350A21C2CEEFD28947
+BC07BB49404FA39F251E36B95B7338EF03F2E63FBE0E023452097F21931A2599
+4EBA7BFA669EBEDC0F5B33375DFE6DB1638D19D4B5112B5338B14C93F707D340
+056B2B75AFE418EAF9CD57ED842F7B5FFF037B3A4B369C63E4DF9F0BDB4E39C6
+C5BE8EDA628F1C6FEEBC9D9886DBE502CCAA86092646094118069757DAC25C38
+2CA53CBA27577BAF2C57196489CBA54B96C650A1C130184A4444CDE2D0CB1A49
+FADCAF1FE3A66334F85FAFB00F142F28AF2D8FEFC29FE8E0FDA448F181040BF1
+62EA7AE75100BA46B49EF30F596CD9091164AF70666E254938BF6A44F01BBD2C
+4160164FD89FCD358E48908BEFBAAC4411B52390CEED6B46D729698CCA8E164C
+F77CEBB50C5254F81570E414B1E9E79269D3B2575E161620CC732C0405A29ED7
+1E5A6597D35B11EE08DC09FC9C27F0126C22C73A0EED657D7F91790777E7D8B1
+EBAFB0EC9ADAEFEF7F6A91A1028E46D76289EB1BC15D3597CFCD78D88B633759
+93CB4477596E28A1E413BE25D513BA611757C994AE812C5A6D9AD3F770499252
+C7F53E585E03B2FF056EECFB7ABAC474A981D757AB3B6F2815E7AA8AF8BBA42D
+4D83EF8A0FE21CA5EBC295042AE5D74E6D05BECCEFDC74ACDD0A59AFDAD3E94F
+141E4BFA04ABEF7E6C43418A5EC54C6E8CCEA1C34DDFAC9CC87DD5E9D4BEE705
+F11B003956DB37B145DDEF022C645C19329E6C04E1EDCDB5F6A33AF1EDB9A17F
+79066B1C3579E70B2D43DD89D1F5FD2B2015FA5009D612781CF4916DD8C7B1B5
+21FF0CFAFCE882A106D356D8851F73635A4E7C81FE0BF6378DC2219BC883E3A8
+23290969A2ACC06A77866A8AB83B39289EB14B4F67511FC97F3BE410B4DE91C3
+54876DEB96AB3C60D1FB17D29172F96E98D3FA77B772C69D17A757B6CE32D2C1
+67182DC41B5E19F31F669A886DD4D08092AFAE132C0E0FF810FCBF937EB3AF0F
+5AF1416C11508EBDE0C0EC1C618CB6F66658D9CA3793D523D224F8C9A8ADF6B8
+16CE7D210FD4771ADCFEF08809C0E9A37170F0C02A9C9907FE38DF8795C6093E
+0DD464FC59313CA7EEF4658A498CFDA9458AA1A86B2A0933182954BFEC58E9AB
+3BF65DEF9BE5289826A7AE0AB0E93D83178049CCF8BADDAA7BCBCCA47F983E22
+3CCBB9D2D522DA2A5EDF409A862A52297FAC35CE11176A8B89671BE758CEA324
+5BD245937C46D52F15241E22F803F77E7B5ED83B6395F5387EA7CA46E1DB1F8D
+239374BE3F4640A6FE06CE65A07123B722523AB913DA6EA385F524940432DC0D
+CE2A2A50539C42DC0942ACC30D372BACF8192645F9943391A602A019EDD69241
+BB0EF67C1C367344D82F5669A75D5234A3FE9312EB4C6BE310722AF8065835F7
+E55443034F04E4B41F321B7CF95EF163231979A8D7D2E7B982D6DE774E8F4CCD
+D846A38D9029028C50A99ECE834C67F7CA30F39F4D1803B3CDF4D19FBC3D1FED
+EA3F72427D13D6C51FB97E417D38E4AD86E93498AC245EA17317EEE503D11C60
+E6981F07798D11364ACCAA0F06E6D748584EEC92720F50B71157AB2887406B13
+491C79A0054F145417D7E4902CBB38AF4DFAB4F84E25985A6FBF308D974457D0
+8FACC57B056749382FD35F7D9CFC58B2616D205CA0328294C7F47AB9EB50E1D3
+56B4AA213B1605985939AA68DEBCA1F50407136AE16196EA910089D913A4DDA8
+079F046AAD1DFBBD36DF39C43CF356E40972D8AE3F044F31320A3567520331CD
+67227812DF611C31DF6C7B420A170B43A478D0678F615AE88B94646F0F1A400D
+3E6FE22E584B1197B373FF2A0CA5C90CCF064A5C8A08170269E967DA2833840B
+BE87A26B8A5C80F8460100D97C17B62BB62F5F4DDF270DCE6C4F08A733EE750F
+6FA75D57A96F5EA3D089D5634FE7C29D6A3DD8206FFAC31EFD273484042313DC
+406A646C898E7FCAB097C6E362CE13741CC04549691C6BC246D9FA598AD671DE
+81A05E8D011A838E3B9F984676E03BB77EAA1B1256C04028801748155A2B5082
+57E9BFA74C3C18BBBDB7458B5AA3D484CA516A265A9132CA6A16A1C6A1E8F600
+9F9368F4E22AC348EBB52736035A4A4524BCD4B2EF54314007FC9AF134754FD2
+C20294DA556EF82639E26A3014F597955B8766C1E317D21E978A2ACEBAAFD25B
+6D27E861E254230360B34431BB58A0037C3372CFDF13DD806DC6ED6B0CA4C96F
+B7018FE26AA64C1D23879F117F9969FCBD649805FE66D5B439F6531E5D841B0F
+43D110BFE886A11CE54869E036D6480F6C6E0DDE33B40D605671D99A6D297C82
+65B1F442602A026AB0B73BCBCE1B098C423CC623D40D679E45052492E5129675
+F1CA105AE94D7BBF162E8B3CFECC63429E866ED4CBB69F25687DB74A330C7F5F
+9727BD3DCF5890FA9BEE5A7BD997433CDD1315850B490DD4EF503BC1A4F30F93
+F032E761C9B4A099ECB96F1DDCE4262FBD75620EDD89659CBC70EE3FEF7C50AE
+CB47D9BD8BDDFB7D5ADFCE11EF6871AB41369A582211BB5680DEE2BC141259C3
+08B73E26815015B99AC3683EDD9EBC880A5A64EA728DE0AD8B038D666955E6C4
+0CB961183309835A70BE28AC86A0C90EBCDE36B2C2F9DCF6E61B27845C048932
+1D9CD3F5E7EE7157A478A9B624C46E044AA050942FF1E15C8553321D36EA7586
+3D4A7CB9D971063AF089F6B2A288A83513B4EE3A0F3CF537633604E31FD22B04
+A7A63C54535D31129C4713E5561100F41F596A2771E3399A84C7798C187AC61D
+359E2181B61DEC7EBB1E38A5B188A85B9E0A4CC22E0AE4FDFCFE8DD776C703DF
+D581E9F3F68DC63B91B7CC430EAE05D7451345EE9928B18947D1EF0907138FE8
+EC9F98CEECEABDB91CE0DC993391632A2993E0F23EDB138C388ED74AA061F4AB
+A9879A48EF233D72C2CC6A976212801677FF31818CAA227205687600362634E6
+380A6FE49F7A3E111B50DC40B97D58A7138BEF9BF2D58633643715D96F09568F
+D192E619E4DF5BAD6E934C3AA1E29579E85127024193F3866F235C58A9A097F1
+56158AEDDC8A1B66777C28E798DFFD2404507A1E793E990ABEA01D772343B3C8
+0258461306AB5112B36455E39B024D544BC723C61AE4756B78B97566546201F4
+77EF79F142297609B74AAF54FBB44473197E0B5A706FF921C1D7B80CBFF03524
+C6C9B37BF5FF366B0D60026FBE01D9A213905B384449F62FFC7F872114C64F01
+1BD76FF84899641A793D10A504F0B56A7500354C748A68EA4396296F0EE9448C
+1997C351D262E9055D2265E4C467FBA11F97E80B6A862D398D341E46212B0389
+08BFCB93BB7ED61C0E4D3BAB05C9A620E78E19342F02A9433B97CF7ACB027528
+E70EA97389D55DDA0FE4BAF2BA8205D3ECD294BC8EC81293C9A11F79C87EEFC6
+C18A8AEEA8F0987BC183C9EED25A91F77408952DDBA65BA715018CDF4145B64A
+393ABA54A176F8DCF83A5238D538B3E7B569229F5C4CFAC3CC9827661AF20F1B
+44A7930D1DA6688FC1B11BAF855E3E994751E9FE7BF4D588816618A022E25673
+F9C2D9D9AD9C6A16CCC923BD9E94E9A916C6561E692724C499F0A49E13762197
+DE52122CCBF93E3505209FF7F66A36780C7492650F4534E5984642BC7844C69C
+0DC60DD6145A5B1662884BB82E4A97EFF6541D10D8799707CA86591BD8CD4CB8
+59BFD8D36AF4D1DCCA1433F20CDD724F3550D88875CDF3FFD49C6F1EA956576B
+A1C64746D10C0EE07644371CD7FA3388C308B0E20918061607730E92A11057C2
+27303C387E163212DA3C5EE8952BD9F7F328E35D7AD3CC0FB84943ADB0BAD7E9
+6B4426FA53EEA4F2155359CD3F8E8DD5F0A1FB0B6C8F6A83F5B8BB179FB57256
+57A3DB758AE0F7B0D3A636F09AD0A86BE31303A6F48F2B925B6EF764DE59C3E7
+C995C5422BB61BDD691A5980CCC3639234A7A48A351E67E7ED9F0314B2074210
+36725D5306BBA32DB24BCDBE3F989EC1BB9CFFFDC156280BE9A7F7253F7F4516
+0F368A18CA6B1DCAA5C99693B6B0F593400D09AB18EC8F741091A32E5B5F9BE6
+B628F840E28643A9BF7E24D37E9C39A05BB70479AE6C9905E9B763F23E546A54
+8231D1A6009C658AEA37CA6FD5D2A36604370262583DE5CE3568999E594E5A3F
+4D665BBE80C7109A6FF96A856B511F4251555B7FCFA55FB1F739922F7E62F396
+482ED48EFC10B10E6D68148DE88308307BB7643999890BBBAAF2D11484425A43
+B41A4F2F076CA8D187074F3621C0E4326F7B48D5F582A91763A02CAA769947C6
+A424FA57F87E92EB9B199A540A05D4C65D121321BDD09F99EFFD4D43536EC180
+2A2DA1672CA05956D8737D514B088DCAB5D09C633A75BFD6CD35105A9DE88968
+F46E049EB38822AABEFC6EFC14A693555A7D35BD96764D7B915E6A1153A9F5B3
+84A79D547CA8DFFCC4D1F1C168EB6EF6450DC470DBE0A72D1264EDD2375C69AE
+554AB2DCC7F966F013F0A76F0FBEA1CAACBCE1B372F098EB069DC35688E6A4AD
+6F29454E371DA51CEA13A8E8ACFE916389DBCB162CC81964B4ABE791BB71A27C
+51E24E7571CD8FD16BB862199B562E1B9965AD602A77A644E687129A6980F2F0
+F6C1CB584BB8FD1D1A1F8BAA3812CE8D051D23014622A8A508E4296541EE9846
+4A2551A843B6977091E90E9006ED40E62D487ABF2B48633F09080C6C06B390BA
+CEF77C69E858E23547FBF6F22BC51C1C5ECF5430588F006EF7B3DC6DC0B0356E
+CC8F8099721A5E3475857C1F906A11BDADD1FB27B3A8683FBE50BAF54CD4F4F9
+9EB56147DDDE5B5D861CC8B89DFF9502E088AF20947AE7F72BD6F427F617A7C4
+6A3062AF9029071BE53A25E8C329CD0EE5FD191FA2CC3DFD4D623217C5F6C82D
+5FC9661900C111EAD81C6A88FDD47AF5D4B72B0FF9C658139FA478A05EE75DEB
+83AD2C79BF78D9CA975BE573AFAAB5E5F0F01E0DD9ED868BEFFACB15DEF79237
+6E685CEEC76F5884B37F94D8FF36D3FE25A771CE4523D4F4D7D53904683BBF91
+18996F3FA2090CDDAFF660AD63D9B5CABFEBD576C0F8ADA93B13EEB8147C1976
+C0172D637ED71C995EDA78AB85C3654D1441DCB41083C4EF1A123980F96FDD80
+6D4190183B4153BC8BE62232A0D6493D7A17C1644057A21E1AFE7322406F27C3
+94E714925202996554228981A8C39EF9AFB30F5EBCEDDF39DEEE3824D78C6437
+FA7FEE75F3B2280DAC4D76339F99F5848B0BB425B127DCC6EB20C1CA50A5233C
+793276BFA23F8B2CC4E061BD5797563ABCD7DDF79BF0957436A26D32723EE772
+AA63FC5F282FB238676439B1868946D59ABA007C5C5A2100A0878AE07DEA3CBB
+B14FF6E4F69F2A443D7551A6BEBA2C1654E3A8F3058DA2DC0A26CA05C8724013
+39D3B730E70893F0AB453F43DD2E802A46CF66A3E67CAAAB0C4357F167FFC174
+A9BF4E1BEBCF56DFAE9C5A76577FE0AEB09A738E6BED9E62BDF7BCF5B624312F
+E48B9DE428BAF38EF9AF8F450CF90E8BCF452D1888C42CEF8BBF2A75953E1F64
+AE35EE604F03199852323AFCCC72CCB2C20C489F2514BF347BBB5930BD425888
+6FF69321A007E21D77F57367F9D41E5D0E01171E96EECA01175F3F85A946C621
+9531EE5570189773AEC2E9D9F2AE5E4CEF742E80FBF22B0A3D4C56D825689D81
+6F6186E00B39E9054559F4C05D35EEA024C8B2AD71F0573BCD1B781F31BB44E6
+FDCE0787C66554093121FB5DCFBF83F06092DFF4E1FD10E6195ED375F9B4AF57
+0186238CFBC277EADC64675C7A9F2F2E17BB2652024C2E9AFBB0D9852D6D4B15
+2ED2EE3374436C58A78EAA552617F8694F123FDA2ED16E7E2D4C45593E0EB4B6
+3257A22F303D0D0AFF77A320967E5FBCCE40BA0FEBB14DCD0649B63A68C6F78E
+53DB018C87D8FF4FD1DD789159E76F50CAE880AAB7850FFD309B0B929A641DE0
+FBA51339C4ED5D050398A37EEAAF4D84EB7223D3557E846123462EB60CB8C35F
+8B5A628A16692B1EDDEF9ADA7C53FC1BFC1159A2290682ABA5888506482FC7C5
+26A27CDAE23C5D7079FCFE42CB1BCAF8358886B08585872528C6699442358D53
+FDA54CBF9A6D5AFA19450A5D394D209570C970679BB11806423E7A451D7811AD
+6284843A4CBB0B7591646B650BDB39E17C6344F846A2F3318CABA7BE6BEE67D4
+712AABD80A4623DB2D797B9D109B7403C46659EA299C8274CB49E9D31A0A9889
+5747621182A9986751141890719C900A785C4DD03C8476C2A3DDF1FC85441D6D
+089C7C126A72D8950A453C8C40CF92FBF4107DCC4653E836264BD29F584E1B73
+47B9234FDAEBF0768968BB1F75871DBC0C39CED01611F823B6A17742FF4C407F
+6E514DA20DAB72B53D3752B3F2CB8AA720A3F1A4E71938DEE47821E16E97E0F5
+32C9F57335B12B0CEF6B20917C1CC06F035E23F93B6376BE83467C23F0B3A687
+57D9616B932D6BBBF181B6DF116B3D88E5B6B4327F84A16DBABC9ECF4562A96E
+D89A445409AB5599175743E559E9C642361DA758611C0D56ADBEE0B686AF487A
+EF7EC4FA9CD87239886968B7FC3144313F5F9B90D1A76E45718DB65D2F44D123
+81189F26088D950335E085EB3BB1BDAC3AEE5F5A1AD7C44BD119D04693454422
+CFC2855C6667E64CD8FCC76088F3DB888DA386CB77A060B52930576B80E6CCE1
+D393E689AD64D9A3A3BB37C0EC3CF9286488CFAB18D656E1A0F1B078BC8F5D63
+4B56A82578844BE89201880C0863BBF7F35F1983FBC70C5D6372E298B877E6D9
+89B3A60FFCD876C5372605CF2B5C6E3EB4642D14C75DE75DB264111AD783D49E
+F63C3CA3B6D27A2BDA9C9593E6AA5C0A851CA1B8420249B8A3294664BB8025E1
+EF9246BA8D12186C6EBFF3EAE52B4169832CD1E95EFC52F70F0AC1C4AD47E661
+80997CAE243FD5F4B924C597F32E0FE4E32BE29C6063F4813DDCBB96F25955AE
+2E691AE1A7268B0592C934FF2AC5B6F7F54C8858406D1204EF17B09C3CFA171C
+5FD08034D00EF30FE2276F9E1C0788FF3CFA161EA1B9F233991B949E21942DA0
+B1026B5EF71B85BF1393E114FEDFD47189BA3DD480D3633A8A208DCA897150A3
+C47EAA87B8789E7D57543973497D119AD04F4E3FBFC5DC7741FD7645CEA76742
+8F2F551AD179A45C361D5B314692CE4C4E5A571583804F35D3A45A941C46E168
+68844DD4CD99284F2580E45DA23300B47C10B666E1F7B5C25B8BC054ACD1DC44
+12668056ED2E045E777D11836A5BFBF6B1C79AF48659C57910472C8232C37447
+328185C6FFF6CE1E24EB9D29D0B21E6F40BFA843E2FC6DB59A3A576EA7C26F0D
+9275663D03ED3AF206727909CF6E82B1916FED911C5390D4089E33E01D3A3580
+EE8A6D35421297812C7250FAFA6B333655B2A249BA8489146EF66CD31BB734F8
+EC289D5B6541A15D423BA486E7D173676282FA6A12DFAB03FB706DBF0A2C0332
+DAE3E859146D2ADCC1EEDF29AB5E98A4B4085F8F312CE94E5448F93653A44AEB
+1DB10210A1EA1597064BF3BDC2BF8BE227B8E0321884DC1B2C1F426370929D30
+22D72F8329C8DEF5D80E6DECD597158968F60F4B5F910537749E1963C161DBD8
+83D94CC3C7A334722545D617B9A8586489D5B866429D9130E785AFF3DB7F5AA6
+571A01DEF40E75570CC9F48C4BDD044C5D9412683C282406BF2C5DA0B0661528
+7834CECCAF019ACA31D27C4865A11BB664EA1BE6377A972E76A05F12E697569E
+2C400B018F1EB7BB747BD91DE1557E8B85F890A983D5459EEC773DC0CE99B403
+B15CBA9EED2EA4887C7961E8B62C566CAEE124F329F21BAD56E8CA6ECE16A249
+6256504DDF5C84F5D1222076B4DFA6FB430D2142ECD3765B65DF8A6C87278435
+45E4C826C1922E357DF688EB6F4A6AFB6438D94F7E3C444C0372B7C7CD26AAF5
+6C7B8A44EBE6DD58CE6F878747F7E59FFE8F680661EFDD36DFC4771EECE0403C
+F83B20412E006F32870ECF167167974906F99BA655BB23E5E26288535A4AE670
+D3D087F96E076E060AE6A3544570264FC780DA250805993A69D237712BFFE3AD
+E587B70D2970692918D3F80E38A769697E98EF5D034C9CFF6D8387D95E16AF89
+4B558561839DD96439349C745BA98D28DE129BA9334EF36994171DB9F358A41E
+C1E7CEE3DB6B8CA16E93ED1DABD8C89AB3BA454C20F201D24895D2F2186B9079
+B15430E6742BCD6DBF54A4915CA100B043B341B489F9AB72F5AAB8546E1B2704
+E4E8D752DC3E90B1B153A78CD30E00B87B9E812693BB5F8A72BE121FE861DEC2
+EFBC76D20201C0357C93662F6243AB7C003D51B1B3E4C94830361C81B606C747
+6FE16472E5FF087A25540E66BDB10A7B23641E893396A1BE38C102EB4C391648
+DD50D074BC2B3A10AE6E3A2732C5A94DE40547D21B7F9DC11635B8D6D6AC72AB
+4048758EA9F043295973B44B0917B14A8FDDB152D47E92731762B5FBE7E2D424
+A9BCEF2D296B3D8F41E724B6FA037540C465A087037AC77F1AA11A8AFA6B6E1C
+8960CDB46F764CED85F36A34D12AAB1B6722910A9233134C1544DFFB42B98D2F
+83A97B3898EC57DC07EC4BD53D01E467AAFE50DCFF7135DE13ABF0B826558D66
+5B4FC5862C48A5ED474B3F7BE7EFAB84D141BC92EA5AC299AAA26A6AB4C1DE9A
+AF8EF838CBB14C4959BEE5928DC77A84786A0DE55B91B86290651481CB528085
+AECE1722541CC470971F6A2DE7F4B116667189630CA8CBB78541807DBECDE55A
+D5CACBC8BF7AE4100130E499ADA3521C7D59FFF2ADC8826FB85A4B8A7F6A7B5B
+ED19E9C421D8873270FF623B39A4DB33ED21A32A6A282597595C1FF9E849CC85
+F7AEE01F8CBB21F75660B5520501226CD6B872E116BBB746FB9DDD3B3C545175
+0F4661041FA2A8F5EC7601C145AFE3DF783F676291A3BFE672C743CE2254677A
+646CCF082F592F8A2B074ED57BDD4AF9A5DD8D11C86694CFF16A0C67D1FA1C92
+6653A957054357BB9EAEA4C8988599D7B0EB635C03ACD63463EB8F449FDDEC80
+EA43FDD1B6CAB14E3D9B0C2AD3E118E0A0BEBACE1F893939E2DFABE6BD99BAC7
+96083DFF40B552F469AF20D34A434E48EA180BFC8E900F20992601761DA723C6
+1C37176DE8455D0D9D563CD165FF48348F3B5401A5F192F9FED4321E5E765DDD
+824ED3671F21A449D9A623264174B5D64904CC1B10C10AA482E25100F764D76E
+E73A630AC8A559DE6C260965DC16BA31B46517ABC20C5C3D89FC6FC187D0303A
+516C7A2C1C5462E313DAC0C11EAD5D7E771B42B468AB101F284BB94A82432278
+D77E799D2E8F968EA055EB2512EBB67607569173BD75F5154BD3E8BC74B1991E
+5224C3930CBE1E222A4568A043C508FDA7B3A9FC07C994D90DA667C78D28EDF5
+2CD2CE44DDBD236316CB70DFD53D179A78A01F3A0243A88B94B69CE85588A85C
+FFD9A23A0156293DF9A3F5FD01DB8E1674D691E7ECE78E5767271185C231EBC4
+5D91DE1ADFA89EC1A8FE743062D934120AEDB02006FE70DE82F5EE24B36E829B
+0BF2BB312BE578CC81F4F4DA811E6F25DA2D82173620AC20966C9AAEA2819AF9
+0EDE7FD2EA43F7C02A52DBC4E3E91F287D115B835646E53627A041F700D5B631
+1C9236501F2717B2BADA21C20CD9BA48F7BAC488913DF34E5B8679CC4BA71F87
+0FA9968E9D00C5D0CF8AA0FEE7DFF80131C8F5736361C016BDFCD85E28DF8239
+8DE792BC87B0886EFF1D313EFA13D6486478E6A52F5B6383CE563FF948DF4B8C
+33F95133650F966B3D38E9AC0C61C47527193CCFA54EC6368542691480DEF9EF
+0B74E4382CD2D7EAC72D0DDCF86F9FADED7F2E11C10F992BFD6C74A1AA8A1013
+D317438AFC7F22DD3C7EB64AEB8C8F267FA73F398BAA4434254B993FB12E1922
+EEF8515BE3CDF0BD57C1F0433F9ED466963E0136644C0A4280902C1BE9A86656
+729343D578E0E335407B7D73B9E6657E28675941D76836073E1BDF1768E657E8
+9A06266FED44EB127C0A20650528E3FB33D5771EE49F579C7A70E8231E093A59
+4B8390600524F0198C313F2E6AD936B382098C1BC7FB228F5A647E7EFC382F93
+AF398A0640C5999880057A5619AEAD4CD6BC34F70E7F8B9D5EA6BFCF432C6BBA
+8A23510A0C306C5EA0BB33407C56ADC76892EB7407110CD7D2B2B063F870AFE8
+B1ED86BF1593426FF9CFAB3082CB3ECE1BC3F103E0006B2BA846DEB0A0ADC549
+1AA0D92AA01094F8F5CEFA6C86FD432B40D010C148EFADCB035BEC296A4D6F38
+12406270DE9046C76E80FF56FEE665465BE12AC6FA74C2F4C648D29164248CE5
+8831C4BE49DABD324754CF75DCD125F59948B2B1D1F0E116DF84BD02A99E5803
+1D3309C72875BEF544DC1BD37F4AF566745A2BE93CAD7E55EEF5DB17BA290B5E
+DA86BFE145591C2034BF045006BB8D59AC0B1C585959AAD12B0B50C2A6175093
+3CB5F54B957712912FC0B2BEB6033012D928859F510312EEB5374ED10CFD5C19
+8749731A97AB9DA6A2A63C44A399A1FD09FF17AF1DFE301232A8383A6AC2F797
+40A188F69CD72FFC973B0BA64F7BA901DAFD00F28F986582D9AFE5DA387714E3
+41B60BF69D803539F0A1B0D3D42896D449DF4411348A00C05C38ED31265DD53B
+967427E22F0089F357B5A39B81C1281248214FDD1148F92E75761D4D7D5E8982
+95CDBFE275FE44399FF05DC34245C4BDC38C4F7D265A4F3C1E11717A6F3FCE2E
+720FC5142AF5CEAA75CC1868D172425A72253EE3EF7CB99A09D1E46609E3A935
+0F39505442E1A756FB0AAE7D30BA8D3DDD938D0AB9D746E65349D5705B36F60B
+335DBD91662CD5A12983EE0161F8C4338336575EF6C9C6842E0611331EBB34B4
+DC778CA9FE0CAB8839FD80D19AB95CF070A73CFB99467256F91D37BB669A470F
+C5E25FE5342423A2969CEAB12CCBA86DB276A8ABF9BCDBF377C187CA63BA2087
+FF862833B9F03FFF0132E790064B08913C625E7CEE675C1D4226AD06B75C49CD
+DB8CB63A2D32C57031959F177AC8720313569A540BFD5B31E92EB12A923B7329
+A128E58C06A6A0A056FF16F02B37270C9BC345B8459A7A66E1BBDBAAE72547A1
+D4D7571BD1D23FBA973C096C0ECB08E93EF56EAB20D009C7A1A9F396151964FA
+57DD810E1784731BDCFAC8868F84C666009FEBE9452934099E7DC25EBEDCA33E
+A81D7D49A1FFC7839AEC3A6F621C7170C6BB0F13A2FECBE5A1590A6EA8934E1F
+7396AB950A313852EE08A87B98F103C9E67AB7FBD9641DC4D63B0708B2401D9A
+D2A864D1DB420628B35A9908E9AD019245C30312E8E64819C1D221B964CEA54B
+A195B12E517CF48AE685D2B50D34CB38B685370E762E95455ED521B4D2D9D441
+AD04B19E87CEE1E101E0F6258B66E470A0068EA4ED6AC706D7BB0A4B7A9F56D7
+E166CEB698465FFA3FDD7F63CB9C2F07AA7221BAF32E8066E1608D5CBBC0F1AC
+D7A8460668E59A7C8DF2AD01851199D997CD10496D687413D05E934BBD028721
+EDB1CBB81993265D6547FA78E7BD9D01FF60FA333F90AEAC3B6944D629F5E9FB
+5F8FD93E49E4DE564F9441B83BD8D93D6121C76F8AB0DFE84E62F21C34585514
+CE0C80F8BBCA8E5472404DE3D990015828187F7BDA1D66C324F9217A3AE1C9D8
+6F5AAAA20A7F6AB652BA36971B40C4F0A90D762864F8E2AB4F5327CAB2CD70C6
+F5020B01155F908799EE5B906487A3BAF15579C814D94BA8A38EC38515582A40
+439F347A516379BB54F9770E1449D08F89717E1EC32C305C2D6CDDC35D0D5F8A
+8189D3378D09D6B333C6D5B83CA36C7029FA7795C9DF09EA6DE61362AF79A5FD
+38EA53024DD44FB8E53BDB29EB2BB60A7A284EA01B429DFC9BBD5421C8DF7EA1
+93665459A202289AB7217576CB845E2A1D83EC6693FD3CDE809A0AAB042E3778
+F9506DBA544E1032F690F0C783CD4E7CAA58228247DB04F1FD4B90F3305B0B21
+002737BF3F1DC28217AB98D7632B6F966D9CFDAEF72C2973FF3EFF17E02AD8B2
+1084C5E4DFBCC76B3E1EB7762B965D2D8844A771F08434253A0364120634AE38
+54CE24483F46388CD94601F361FF3FE78A304C549B82F178D204C5E4BE9B2485
+8A39D1D0CE1AF954AEC6B2982EEBDF8A0FADECC33733CBC144576FCA8F58D0EC
+77431B64BE9C9D3744E26BE5FEBF912DA0B16AF22EFDFD92526E9A65431D70DB
+547D241269D266DE9EAF67A24B1EC9E329310DFC31E23EBCBE7FE8DBC78AB553
+6A257514969808E1E79E5AE3C6C24FA363E4F616F52B4724291996DEB52D8E74
+391357477DFD2A594A0B1F10B2831579F4C526B234BEB990A4223F0E5AE15A59
+ADD7112BDE6E257EA454C9E0D439D24E6412520CA5CDD3D5B85EB35934EE5E92
+404C808346B7C97C61CB21908AC35347545F7F426B363175D50AEC231460BD2C
+035BD4A94C40B213D13654E2C778277EE429444F098B2C81D37DF81EF898C799
+E645375E86DE4F00D18B26F303C3102B4E8EFBA1DD6B64E49EA81FB5FF52E94A
+281C8AD2733339FD58E207D80F6E225D53ED62F1BB2FFFE2764F35B80CDFF711
+A3B84DBF388EADE65A4F7E38D6AFAE2DD00E3A161F85F68B79DE87CE4CD5D77A
+73641E1B8E6B355A84740D5CA4E74EB3B245C261F6F769E789C855BC6985090F
+564FAECE25C11FC509D63C661A8E6A8FF1FBE8AAEEB3759CD25FAC35BBEF23BA
+745FE0A1ABA7A477C8FB63968B8AD3F7DA8E248CDA0AD67445B9D6F6FC034B99
+792BE166BBB0781BB3B5BE5B9EF6B3EBD02C01A4BB1AB7FC048A71F0C429B78A
+182BF84D462645F2A11A2A41CB1C94CFEBF17ADBBB9063B4F5D0FA9CDEAEFD14
+FB9E03BD6D5A7737FA1CBF6A7387F84178453B2419CCE7018184E0EAD5F40981
+55A1D215AEB571A861A1F12DFF84A17B142925582709DC5BFB6237C7D37D5ADB
+706179768BB1EAA959137401AB9DF46CD54314F93E31A4CBEC0E1C589134F6D1
+C3D3B273E947D09DEB0704A928571D1468C3CB347EB545040E07D3A670816D72
+764998EC7988C5A25E6D2403382866FE5408037BEAEE7EA98BD8EE300B957965
+5B79E8F4BC6F84E4CB037270D4D9FCBC0008408485D855E67D3CB8ADCF7380A9
+09350593ED80A9BE9CF77DE6D1D4A170DAFE7583CF6851970B14219A3A2B4684
+A8010B4F7B422DD699C167BEE110E3890699D710148550482CBF2BD5CEFBA8A5
+C1B45320C9D0C8838546474830316E1E238CE2704C12D43211639333E9AEB018
+68C7068212A440912FB4E58124325DCC233A8BAE6D634C9E47DBDF449974F42D
+1D346C206E452F1C1AAF76852A3FD5F156AE0FE1DC777E460DFF136FB94A6879
+54F0E6D4825AC0C6F72A71DBCEBBE355BCF1D0A336043325BE80D780DD21992B
+5240312D13CD85C2C2C9F236CCED4F364ACEB22B8712BC0598B75E565BD05A9E
+B579CD12D262FF8114D93BFE09D1EBE2B38C6856938C0224D6D900EA9E3C033E
+18F7C4E9D4954BBF699B4F7BF5424EFBC36C9DAD6A54C1304A425DA7BF3CC236
+CC82139A00874BA953C4581ABC1B6B06567CDCDF78247C090644C8101E0454F7
+37B42EEAA2743D855C90D03A0DCE75EC28AE7765A5AC7888B477AEE2922C1121
+FBAD4188E125B110C216A7AAF048F41AA81E7F32ABBF1A3F597069561BB6470C
+1FA96B179FED4D6781C6F70A343A9CA3D757AD37E73D062970AFC4DD6B54304E
+A9D7F87154801D7DFD1C45E0717387EA331B8A5DB13DA5AFE56B341FE296A775
+EACD862B7D6987BAF4B73B04455341B07BB91830868639DA3FD78C0E570E8CF0
+4E85BA82CADB689E7E5DE5777D0200DBF1691AF7A44D0E3ACB9700B1829AE038
+50566EDDE5A9FDA33AAABD737E5F73FD76FB021805406F8E525EEF4FE985B6ED
+178570FA9B4453535E38C6D3472BD475A07DB82B0EAE3950D569F7D0C16C17B8
+3737B780DA66F50B7F678B8020527277E243001434176C6E8B9B9DAC87139FBC
+30F676E3621F59D2F8F0476FF8C528302C7748CBAEB2997645DC7724FA8588FF
+C2969DD8921AFE6E1773AD1135775DEFA1EFD197C113AD53A656D4B7BC1613F3
+8C56B27578F856FDDA30652F7D6DB38B819D1E536B2745421DAB8F5E21932B7E
+20412937F8668163EA41BF6D7855B884943179FFE4F2C0C3340C86ECFF4B6DBB
+F41CBF9DED39E7BFDABE6AD603FD6202A47536E5102E7181FD60166EB10D51EA
+5729F7FBDBCA979A65A8FE0A387F78A99CC7E41D87E0D791EEC0136BE1A077C0
+19FC4B16C601DED739DF6FE9CEFA9E48997624B7C768FD5259D0766A9C94B0BA
+9FC8336C05005DFEC39BF559A36962F16F21F208F2691705BB19FE25AA2FB0D1
+DB727839FA045A900A0BCC2717A35A2FF401D10B7E504FCE43C58769563D8289
+03EB34FF2A2C34107C0D2F8984ED
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+cleartomark
+{restore}if
+%%EndFont 
+%%BeginFont: CMMI9
+%!PS-AdobeFont-1.0: CMMI9 003.002
+%%Title: CMMI9
+%Version: 003.002
+%%CreationDate: Mon Jul 13 16:17:00 2009
+%%Creator: David M. Jones
+%Copyright: Copyright (c) 1997, 2009 American Mathematical Society
+%Copyright: (<http://www.ams.org>), with Reserved Font Name CMMI9.
+% This Font Software is licensed under the SIL Open Font License, Version 1.1.
+% This license is in the accompanying file OFL.txt, and is also
+% available with a FAQ at: http://scripts.sil.org/OFL.
+%%EndComments
+FontDirectory/CMMI9 known{/CMMI9 findfont dup/UniqueID known{dup
+/UniqueID get 5087384 eq exch/FontType get 1 eq and}{pop false}ifelse
+{save true}{false}ifelse}{false}ifelse
+11 dict begin
+/FontType 1 def
+/FontMatrix [0.001 0 0 0.001 0 0 ]readonly def
+/FontName /CMMI9 def
+/FontBBox {-29 -250 1075 750 }readonly def
+/PaintType 0 def
+/FontInfo 10 dict dup begin
+/version (003.002) readonly def
+/Notice (Copyright \050c\051 1997, 2009 American Mathematical Society \050<http://www.ams.org>\051, with Reserved Font Name CMMI9.) readonly def
+/FullName (CMMI9) readonly def
+/FamilyName (Computer Modern) readonly def
+/Weight (Medium) readonly def
+/ItalicAngle -14.04 def
+/isFixedPitch false def
+/UnderlinePosition -100 def
+/UnderlineThickness 50 def
+/ascent 750 def
+end readonly def
+/Encoding 256 array
+0 1 255 {1 index exch /.notdef put} for
+dup 58 /period put
+readonly def
+currentdict end
+currentfile eexec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+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+cleartomark
+{restore}if
+%%EndFont 
+%%BeginFont: CMSLTT10
+%!PS-AdobeFont-1.0: CMSLTT10 003.002
+%%Title: CMSLTT10
+%Version: 003.002
+%%CreationDate: Mon Jul 13 16:17:00 2009
+%%Creator: David M. Jones
+%Copyright: Copyright (c) 1997, 2009 American Mathematical Society
+%Copyright: (<http://www.ams.org>), with Reserved Font Name CMSLTT10.
+% This Font Software is licensed under the SIL Open Font License, Version 1.1.
+% This license is in the accompanying file OFL.txt, and is also
+% available with a FAQ at: http://scripts.sil.org/OFL.
+%%EndComments
+FontDirectory/CMSLTT10 known{/CMSLTT10 findfont dup/UniqueID known{dup
+/UniqueID get 5000800 eq exch/FontType get 1 eq and}{pop false}ifelse
+{save true}{false}ifelse}{false}ifelse
+11 dict begin
+/FontType 1 def
+/FontMatrix [0.001 0 0 0.001 0 0 ]readonly def
+/FontName /CMSLTT10 def
+/FontBBox {-20 -233 617 696 }readonly def
+/PaintType 0 def
+/FontInfo 9 dict dup begin
+/version (003.002) readonly def
+/Notice (Copyright \050c\051 1997, 2009 American Mathematical Society \050<http://www.ams.org>\051, with Reserved Font Name CMSLTT10.) readonly def
+/FullName (CMSLTT10) readonly def
+/FamilyName (Computer Modern) readonly def
+/Weight (Medium) readonly def
+/ItalicAngle -9.46 def
+/isFixedPitch true def
+/UnderlinePosition -100 def
+/UnderlineThickness 50 def
+end readonly def
+/Encoding 256 array
+0 1 255 {1 index exch /.notdef put} for
+dup 39 /quoteright put
+dup 45 /hyphen put
+dup 48 /zero put
+dup 49 /one put
+dup 50 /two put
+dup 51 /three put
+dup 58 /colon put
+dup 65 /A put
+dup 67 /C put
+dup 68 /D put
+dup 69 /E put
+dup 70 /F put
+dup 72 /H put
+dup 73 /I put
+dup 74 /J put
+dup 76 /L put
+dup 77 /M put
+dup 78 /N put
+dup 80 /P put
+dup 82 /R put
+dup 84 /T put
+dup 88 /X put
+dup 92 /backslash put
+dup 95 /underscore put
+dup 97 /a put
+dup 98 /b put
+dup 99 /c put
+dup 100 /d put
+dup 101 /e put
+dup 102 /f put
+dup 103 /g put
+dup 104 /h put
+dup 105 /i put
+dup 106 /j put
+dup 107 /k put
+dup 108 /l put
+dup 109 /m put
+dup 110 /n put
+dup 111 /o put
+dup 112 /p put
+dup 113 /q put
+dup 114 /r put
+dup 115 /s put
+dup 116 /t put
+dup 117 /u put
+dup 118 /v put
+dup 119 /w put
+dup 120 /x put
+dup 121 /y put
+readonly def
+currentdict end
+currentfile eexec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+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+cleartomark
+{restore}if
+%%EndFont 
+%%BeginFont: CMTT9
+%!PS-AdobeFont-1.0: CMTT9 003.002
+%%Title: CMTT9
+%Version: 003.002
+%%CreationDate: Mon Jul 13 16:17:00 2009
+%%Creator: David M. Jones
+%Copyright: Copyright (c) 1997, 2009 American Mathematical Society
+%Copyright: (<http://www.ams.org>), with Reserved Font Name CMTT9.
+% This Font Software is licensed under the SIL Open Font License, Version 1.1.
+% This license is in the accompanying file OFL.txt, and is also
+% available with a FAQ at: http://scripts.sil.org/OFL.
+%%EndComments
+FontDirectory/CMTT9 known{/CMTT9 findfont dup/UniqueID known{dup
+/UniqueID get 5000831 eq exch/FontType get 1 eq and}{pop false}ifelse
+{save true}{false}ifelse}{false}ifelse
+11 dict begin
+/FontType 1 def
+/FontMatrix [0.001 0 0 0.001 0 0 ]readonly def
+/FontName /CMTT9 def
+/FontBBox {-6 -233 542 698 }readonly def
+/PaintType 0 def
+/FontInfo 9 dict dup begin
+/version (003.002) readonly def
+/Notice (Copyright \050c\051 1997, 2009 American Mathematical Society \050<http://www.ams.org>\051, with Reserved Font Name CMTT9.) readonly def
+/FullName (CMTT9) readonly def
+/FamilyName (Computer Modern) readonly def
+/Weight (Medium) readonly def
+/ItalicAngle 0 def
+/isFixedPitch true def
+/UnderlinePosition -100 def
+/UnderlineThickness 50 def
+end readonly def
+/Encoding 256 array
+0 1 255 {1 index exch /.notdef put} for
+dup 33 /exclam put
+dup 35 /numbersign put
+dup 36 /dollar put
+dup 38 /ampersand put
+dup 39 /quoteright put
+dup 40 /parenleft put
+dup 41 /parenright put
+dup 42 /asterisk put
+dup 44 /comma put
+dup 45 /hyphen put
+dup 46 /period put
+dup 47 /slash put
+dup 48 /zero put
+dup 49 /one put
+dup 50 /two put
+dup 51 /three put
+dup 52 /four put
+dup 58 /colon put
+dup 59 /semicolon put
+dup 60 /less put
+dup 62 /greater put
+dup 63 /question put
+dup 64 /at put
+dup 65 /A put
+dup 66 /B put
+dup 67 /C put
+dup 68 /D put
+dup 69 /E put
+dup 70 /F put
+dup 71 /G put
+dup 72 /H put
+dup 73 /I put
+dup 75 /K put
+dup 76 /L put
+dup 77 /M put
+dup 78 /N put
+dup 79 /O put
+dup 80 /P put
+dup 82 /R put
+dup 83 /S put
+dup 84 /T put
+dup 85 /U put
+dup 86 /V put
+dup 87 /W put
+dup 88 /X put
+dup 89 /Y put
+dup 90 /Z put
+dup 91 /bracketleft put
+dup 93 /bracketright put
+dup 94 /asciicircum put
+dup 95 /underscore put
+dup 96 /quoteleft put
+dup 97 /a put
+dup 98 /b put
+dup 99 /c put
+dup 100 /d put
+dup 101 /e put
+dup 102 /f put
+dup 103 /g put
+dup 104 /h put
+dup 105 /i put
+dup 106 /j put
+dup 107 /k put
+dup 108 /l put
+dup 109 /m put
+dup 110 /n put
+dup 111 /o put
+dup 112 /p put
+dup 113 /q put
+dup 114 /r put
+dup 115 /s put
+dup 116 /t put
+dup 117 /u put
+dup 118 /v put
+dup 119 /w put
+dup 120 /x put
+dup 121 /y put
+dup 122 /z put
+dup 123 /braceleft put
+dup 125 /braceright put
+dup 126 /asciitilde put
+readonly def
+currentdict end
+currentfile eexec
+D9D66F633B846AB284BCF8B0411B772DE5CE3DD325E55798292D7BD972BD75FA
+0E079529AF9C82DF72F64195C9C210DCE34528F540DA1FFD7BEBB9B40787BA93
+51BBFB7CFC5F9152D1E5BB0AD8D016C6CFA4EB41B3C51D091C2D5440E67CFD71
+7C56816B03B901BF4A25A07175380E50A213F877C44778B3C5AADBCC86D6E551
+E6AF364B0BFCAAD22D8D558C5C81A7D425A1629DD5182206742D1D082A12F078
+0FD4F5F6D3129FCFFF1F4A912B0A7DEC8D33A57B5AE0328EF9D57ADDAC543273
+C01924195A181D03F5054A93B71E5065F8D92FE23794DDF2E6BABDA4215500A0
+42D1A3D0D02C0C98BB1D6ED0B7791274C38B038FC7921FF1FB8FAE7258C09259
+4B8E1BD9EDCEDE9ADAD9BD9598EEA9691589649A9A21539161E374075BEE3457
+689F308A4A7AC9F2FE4B301A6C36B0442FB92E3B002623493DC087800B5A0521
+0DB96A23175AC584DE166F59142779F26FEE9783E28DE49FC3A8D6583EE63FBA
+610DA773CA18ACE6F64A4867A1A7817120ABF9DE4D17782866E6CB6B65A9F6D8
+3667C8D3E61E5356E35343FDD4C6436DF73934470916CB5F0ECEA6BFF092E735
+C7C355B56189D1DD5715EC97E50145FFC17BB1497315A9585D713A7A6DFC7933
+995468EFD0F59E3C15865B87925A3F2930E20D5A35970E2C44F1629FA16E00EE
+EE21EFC50D49F5BC02300D0A7BB85E649CB4E2E828C8B1C5469463013E71D723
+2CB11BCBAC191AC751A2AF7FC228395CE9472DC1809052012AEC2CD66695DAF0
+4CA04234F0187F4116C93F59A7F1F8123DE87F111853B785A20CA8B49B3B0CEC
+B11AD345E1A11578D2EFEB0536D125237086CC8CD9F34A5137AC5DDFD8746014
+D74AAE8239B81ACF65F379CF2153B06A238A2D767F294CAE0D79228F0B7D45CE
+510AC9657A1776202FEF42F96D476E7DF407786AEA12DEA0013D3B4C5D0640F5
+BC5BB72C34066270399CE595827175B23B25072723BD24E07F6BCD9EF0175DEF
+93714BAA53960F81103CFB731CED4A267B53727BCA3C97B0BA5004055D4EF0EC
+F725658E53AC86E4061B489AD4154915C3981B3B703E1E2A8D390CCECCA99385
+45EBE35441B062D7D12DAB2B31569387187D74A4043FD71F1C6D352EAE0F6757
+4345FBFB6DB15CAE47CAC4BAE47AECAE5FF5EC19057DCEFA1B23F47364ABDF47
+088A7C6A2AE26B10459B6D41CB69182FD1472F326CE3A15B59255D1DE3B616D8
+9D1F12561038839781E657C896B8C58A32DF5AEA23732A0966D96C68C988ED7A
+09B7E2C8F9F3D0D56879764781566299A4EDD3588BDF70E3D924D25074F30988
+E35BDD827AE4D0B4A06F55A9976BF0DB3C0B1D09CD08E8CB168B50617691638C
+0EC1A791C228177D4FFB021EC3DF5082CA3487AD2EFC8DE9466A690ADDB4C52A
+FE2A6DB4CC275CD33D9136E735279FBB2008D59E667905EBB04326EC33C98B2C
+94744B7F540D86E90DED64572ECF1EAD3A58EC101642B245A9C7232DC8FB8741
+03F97883BB32FB955C22F878FA0FD114451A3B3859B0B5537AFAB73AEC7DB2BF
+409E1FB41D473714F6BEA73CB085139879FA31710E01915C2938C37BAD6D7D71
+45B897E00857D3931A489EAC7B42BCE4E65F73F67FE027CE482DC47598ABCB95
+39E98DA8ECA3E23F0799D5963ABA6E2984DEACBE7B46B40ADC6213E0F4D08971
+58F68C946C748E4B4217CBA2391BE2086C9758F4E32C9B6413E48D84D33A6E85
+84747029C0A9C9B92841D217A902BA8EB333999D62FDA9F82BFC8ED11F67988A
+0CAE42182E414A9766AFFF4B046A09D476F8E3F15A8C7829BEE982D8350BDF5F
+F215F2BBBF68D4B567BAB798B9604C79306C475926E9FEC0F07A99F43473C6FD
+B15AC29C3D07FEBAD1BAFF75AAF2FBE94F104F1DBF838044FAD94B661B06AECD
+D9AEBD02B60CA4546DD6B5B5C1A3833ED07845671CEFCA8955CE0DE5DB8FC93B
+3306683CBFB8E5B79A863DE78D455DE9D592043C2686F88A43140F8B9F3B553B
+7047420E93E753829F8D47AC7621CFE3626F271E31F0019CC02D0B57F67BB47D
+8CFB63E902EA3231C00EC66EEC0D30FE8394558BD3535C888C4CEFC6EB72E737
+712ADC6300162D5D79BEE0CA1F6E4127A0BC90656C01692F6D82C85550AFC97E
+C2693E379160FDB9636FA41AE9C75B7F6643B05971C6D67CE30971D590FC07B3
+E0B36B4D1C7F25110B5DA2130D574FA292B47322975A2BADBDB39AAE69BDDBDA
+A880F9AAB580117708C79204DFFDC08BF4A48919B5C22228845CE8C3109E93AC
+2479E523B8A1C12A6E541118F121DC6B4EAED83491A03192D5C3A2A45D1A2467
+757E7B377C635CF5CAE11A7CB49D49F3A1BB2286090B5F0E4F89869D1771D50C
+54B5C5E091E3048A2C194F0ED00DD64FB95BAC6FA9D61ECD093ED416DA3A4981
+DB07CFF17C4F55C62DF628EBFF06FAC3F3D3F91C30EBB34052BE1A08F5EDA4B9
+08977197950A282B84E21D43C64BE3AE4BCE22C70E7D392DE09D89B7F23351AD
+6AD37225C12BA79EC9951F5DA1E505DB26200190ADE0E549305B7530CB86EFD2
+A896F13A97E51754F70B609CB4511CEFC38BA579C071E9510A49982389980DC5
+336D6C4A2DB100DFEC4055C7AA9C55880F94FBEA9EB280BEF66CB8E1E38A359D
+E5AFB12B540CD599085ADDA7FC2C72E7C873015773FFEECA2C596B75BC39A3EB
+3C43FA2E53C0D7993042F3D652BCC483E48B7F6C94C3FF6D38E276086A6AE67A
+E5A571B9C72E0D7824E0BC2ADF51A393B9E334649F786EC1923C854382B89627
+1B9E701AE5A6C42E672B2C6A33C8BBCA8F69B9061E787D6B92183F20CF4C3903
+FF5417427B84798C82BE28D2C81624E3920CA61EC9EADB364B5A6E50E49A1A72
+A9A090A1FCD84814B8B2708AD787D2B5015DA1305874F58C5EB62F843685FCB6
+465FCA80176CAB2B2FE65E0A270BCE1E3DB97564BEDFAE5CA44395A8DF4505C0
+3E103CC3B914359B2870DA6CD30382EAE8949131CFE31E9E75C3E47A3834BB32
+CF183D4A8B9001710D0A11390C9DAD116196568591D38C2AF4ADD852F31494EF
+573462759A35415900360882739789D6B89ACEFA251C5ED90ED704DD7C3C80CA
+9F6CDED69537D201D520C99E69EEAD5D3C0EB84C166660B3C190166D93EDFE6D
+15BCB6DC5CDCA825E48D33845CC2FB15291AAB823F25CF8BB0A1EAED8BEC524D
+D9CA016027141FAC9D35B64FB9C224552F29EF6B32497254E319090E698FD8A5
+15491CDFE1B988C79A0E3B9D01E12FF084E9FA86CCAE02A3EE6F2917B61A2CC1
+64B8CAF309D1AB48A34227A7729DFF99CB6EC282E3FAEDD2673779AA7E4C1789
+D93FDC37FE95F087C5F88F53D30A2DA9C913BF205FC6BDD060A40184F4AAEB3C
+D080D63B89CA3DEFF310D09EF0A83F3914BD5B7932980ECE139EF0313C20B4C8
+576EE0FE3F28FAF4D3CE7CD0890BC824A85B8EF4636BDF1EF1BB519F93D36540
+ED09FAF93FD71992CA2CE2E83F5355162ECEB32AD218092F45D5A61A44E67135
+EF0453589CECDC6962D0E8DA7E7567603BAF50B2C8F1CA65EA5320984E7D69AC
+9A7D3D7F92565D79E8C9DD2D92CCA7DE9CD058545E9F98AA47904D70E1897099
+3C4C852B3BA131DDD348433C336BDF5FBDFB62120DDEAEB3255E3207B0C84A0A
+1ECF9EC869DB9BFA3693B03FCB27C5A5D3CDD62630DEDE91B4DD5B9784BF0BDD
+FC6EEC3FA7ACA9E15FAE47CDD9B7FCD2BF0EFA10716F08C0AF25FF67CB6F9598
+C607D2FCA452417D2C69DC808A9441A66492394C3450BD30632AE739EAD654BA
+4343459CA36B6D5B2C12C39495952F2EF93D82C73E33236785A79609E260C4E0
+CF3A3C950DE71DDC3939D42DB1CB1CA917CEAD56979A70F8F3B207C805319FA7
+3C000AE2B21D711A6D78C7BFB901334DC06F59EAB6D94B507734C27971F8458D
+D00193645AB92FB8FE163D5C51AE4F40BDB4F2C51691E76EE0636F071F37AAA9
+BA78BD12459CA499210EB0CE2F8BD317387797C33F5933AE7A6264DA06B4A6A6
+1188326147A16B205D1F965872DED7D8EDB3294FAD2FCDF0D423329E9CCF879D
+4E0B966D509F45527F7609DD09694D286F6FF7535EF8971B7DFBAF608A19D442
+C133207EB1152ABBD11C455D0977F66A9B73E51381D1CA4B66E87C0C7175A63D
+80C699A052F00C41DAEF42E7A40E07B1B14107AB0787E24E17C1462960E3C54C
+AE73BE4924464FB177EC62F116B2822842541543EFF7ABDDEE197D6BD8F8D4E6
+59175D8C5957550B70BE775AD52FFF6E7C00DA7CDC16E1DF7446BB5D8FD82647
+3E9F87D5EA365C82A2D991321ECB14A9E3AEADC5A56665DF7072D6DAE402BCB6
+14D92B17F9E063E4E9D8D239C91F5C7C0BCD2FBD936C9D4A0B57659420343B59
+B395BBD1AB5B6003F653699D57E7581F9813CC98D4F072FB78899D6DECC42D34
+F2787EDEA64058B46C4BFAA2BB96E9BE5CACE8D91E4C080ADFC0FA0D4A29C6B8
+54FEA9E11DBCF53D9CA40A21AE5076451EDAB3593E56B6D453DC8EAB8C78B588
+34D4C4F36861B5649BC1E9F3091E704BDA7613ED45C911DFECA74EEA05165191
+825F95A947CAF382FBAF01F3B8B041ACCDF39718D7DC5BA6CA12BB20EEE96439
+BF2E2628AA3BD2C91998E6247A690FCB0CC95F286F427345CC4F1115BA3A6E54
+4743355F2CC991CBDFF5725902C1F5A6DEFDC8638A26EA456C33C27773D6214F
+66536CD2E44FD253531732D5A8C44B336B1BB47B0477350EB8CF74889B93402E
+2356A9CAAFCA562315D8E0B3F42F08932CB87BA2499A875AFA08D11DA73B38AF
+F46D03B7F639A8D7BF88CF07FFF4E91716DCCE6E2CCAB60A64D5E40EFD8B336A
+1BFCC4CB04F49DE1FBDE7AA5B2092A6EDBD913D161A3271AB6411622D0E14416
+37F81E0102F5B0F2F9A2B27819E4BACD7C50E29D6291AE5B0973C657761545A6
+741729620EF2BF1046B3913399C10982EE5F4142CF461EA31042E432CC79A1A1
+39C607D22E45A6DEC008CB4BF6007CDE9DD5802B49A62C8E02A6D448B64177CC
+887AD71D171B99E7ABE2085B37D90B3BD8513995D9A57F53184DA474F6DB5E49
+B73E04CC214EA5398DF7D7541F94E623E8687B511640457A48A68E9D9D6584CD
+15B57CC044D8091C771D175F2EEDD411099BC8F7B4317DC503BB5E405AEEB526
+5E6E1B1F2705275D274E012A98F66075CEB90AFC648B964DDC0E9C4AE7B24CE1
+80B051022E5781A533A21DCFB97893847D685137EAD85BA708A7E118C72FA839
+A9E460B5D17365A0AF1F53A98319FB64A5819B087F554BC056C4BE44113A5404
+BEF759F890C1CA5E7AE156F4F8106FDB4F8DFCCC640976983EADB30976344048
+2A86D7B2AF4A01CA736B98D52ACE392AD4BECE7E61C710B08B66F01857CA460B
+B8376E257113E10F6DEDF14CE2A4E6A99ECBCD302C36CADB713D849EAE9EB598
+F29DC98531D793B79F83091F9B136809E006F34E423D528CC4309AFFB3EEB47B
+9A9DE4D5B25CE953345C326BCBE2B4912641780637783084D3D12693F8135483
+CBB0AC4EE0B5610D7CEB7DF205830BDB9BB404DC1B28FB0824CC187B26C19A91
+DA0025EC739BF3993700101D042DED86D67F5FB87912CFC51AA7DF53F2162D62
+6314A2CE13810D0B8D81F45771391A236422CFA0F35F7A0CDF14ACB2724AA57B
+7C2C28D53029B1146558610E0CFBBF72A85AB9BA308F846228F299F13F68E8F7
+D963B2EE9EF7D4C21690632B640BDDAD0556EFA4EFBF035F13377ABB5CBC280B
+9E0C12AACB153C93351E5BA95A7D149010E204950A59C7FC6581D9703468C1E9
+EFAE37E7E6ACB892B3F8D1248D9A4A72F642FECC5E0B25C15EEB921EDDE84D12
+0E524FE6133C4921FF4921242392C12FBE69744D53739F7E849C1B96C4020AB2
+1FF10DEA608F111749E2FBD8DBCB17F353DCB3075B4F4B8186963EFE95A76A10
+85AA5BB6DB4095291974221829A8E436680F4860E01C3843BE5BB3101D0869C0
+EFCE08D187BC04F58C7A450A59093680A0F09E8E3F12DF5223E7EAFEFA01978F
+D8354753A68022CC92C71F2CA732DADAA8A466D4AAE5999B0DC077715671F518
+E6277741F44AE798EE50DF44CCF71FCF8BC71F76374005FEBC4883C6EDA854B0
+88C0C2B476709AA809ECE41AE786DB1A32B3FBBCC14921673578D3514C8CA842
+E1FF90BE33F7B93ADF6BFB8B1AFBBD080783BEF056A6BFAEF676F7BF9F2DFCC8
+01D255A9F0391951210D60D4D4DCA93AA858B38C0D7B8FD740D5FC6F277C2A68
+54CC2DE1F40B6347201FCA2A0A91822708D820CE645C3E4E5A09FE25721AB33A
+97871ED448F38FC5A349D81F402B34461D840D5768BFC6849439AB6115104F78
+B87115B1DAE12542EA898F86ACE247709817850B067F537E6137196101D46DD2
+D842EA03EF4501E34074E8458E638ACC4EB349A7430AB035BEF2DD4CE00554F9
+18F9FE32A55AC1E7E50D64AAFDA278D77A7149C59DC5B1E3064A4B281A54C9CE
+A5EA94ABEAE4C6D5674C208ABC72563976487136AF2E21F835BEFD232D7F0D13
+1D19932367F51D5379934DA7F1635AC51EE5CEBFA63D4D32F018DEF13624EE62
+31DAE68A08DBE3B4FDAAFC75291C8C6CC7A657E3C7453C7D1461A36E88E633D5
+408253B673AD87A9FB2D0F56DF1305916D14D5DD62051E27BCE09CEE9A1F14AF
+1D7164BA5FB6E6EC8D38750F7E28BE330909F303ECDEE692E347DE13C8C2F82E
+29C8BE6EFD76546F362A12A1C2DC12389EA95ACB4DCBE95620F0C193EAD91B33
+BAAC5801AE827B9AB3FCE5D11D1D7854F8FA8A31670119CC0CA98628F801838B
+AAC7EF90AC5466BE69CE3E3CD9951A5EB9AC08014285422F6DA6F6E221BB30F8
+0042A11F2E4B765BB0D142AD52F4D85785EA71B2E1CE20728B9E9306CE93268D
+99B822A5AB5232EC7E26EE1160850AD3905864A01357F22722B6A54D4EBE58CE
+480EAD9FBF068EE965AC4B5FD2FA8CCB91ECFC6E90B9C49268CA0B0FDAD23ADC
+D5A74B41149BB08454054C451AD0DA4CCF8B60F2EBD061AA03A011D548B6B481
+FAB00AF9225BB5463F27FD67333FB51F8664536267E95CFAA0BE3BC1B8F889CB
+587A3A4FA2B45864F07E11372C9507A625C0030EF7030A0B4D931BCC48F6DD51
+A4D1F63FDC4B59C1CB18E6242E9F4B4B8AD9755B870FE60D640181FB7EB8120C
+C56F51DC8C47FCC6318C2145EDCBEFA7BC4253315BA67FD2B3D4AF6A9F3F229C
+AB75B592EADE15B1FB5FDBA1C0F786BD21A51506B7A2E42C2D086BA6F84D1B3D
+AC7531545F0B01346831FF36A52CAC1E390F99AEDC265B44B0FC9C581BBA6BE4
+48B723811EBCAEA5FEFAEA7E5B987F2C7B3E9A65D2D14A7B74F099401C57E367
+385352D0776D2A908F7A5A2E4D4160946C5591397877025C8C387CA413EFED56
+8B142E8341E349DB4DBA422A4FEE56A573972A0C66590175158E48850A9F7F38
+4B95726787B8F969FDBC97491CC81CABC976CD00A27D1DFCA7CF467A956C1C6C
+839817AEF8794B6151FAE9261119DD5DB787DC9D3B420FD325ED6599FACADE0C
+320D54C2E0D296537E22C1783670A9D9BECAEC63853EC2F05A990260DC189D63
+7CCC0BDDF2CF7585071ABAC14630666737041194D0777EA4292AE60BD7F7100E
+DB568C90F0D899EA006CA423CFFD6EC70A5D3D8AC43C747DBAD3B02219E47D8D
+DE030631F4678C357A58ECC52782B31B50CFD44EC33F41585E51B27E3997D33F
+461BEF897220AEC80007F13C5A1EE3A0430CA899047DF944831F8B010A7DE74A
+BFD26001472DC00CDC9F17CC435F61ADAD4E9AE062ED477FC621FDDF9242C449
+1BB3F77FDD1519A251B663A693D84B42BF0962F537757F38CE5C5D56B98AB10A
+3B70C8AE8D52DCAFCEC22E7B09D3C4EFDA1841C74CA975E4F8294F7BDC796500
+0ABE197ED3737A65F7BAE601C91DB3983EAE11DA3EA18ABBBA3650DC361C2E77
+EF9F97618B0C337A906FF39926D2B0B7883ABBA650816C4C6B34EEA836994EEA
+AFEDDE56E0099D0E09EB88EB093544B9BF4871200746A0409C475FC4232A38D8
+F3105B0FF44E4F132378DD12D9E796412FD0F9478322215E9F59E69396C35AC4
+097C4995B2C3BAB2DD04B1A7097DE16DFDD76465E79ADEEBA90489ADD0914EBA
+53E11A43ECB11D072C68D2131BE1C7C43CB9DD5FBA0A67BA43D6851AD4CD3BC7
+39AE2E22CCC183A56CEB71D4F9F578518E376426E42B6390426A8434B5A83E78
+77A5B9963BAECD5FA5521C2A29418764E4EC1A72462B04957F823E2817A7F8D0
+1512919889500024B1C42EC107E8B8533C0B314EE4E23313A4C1BDB009A2073F
+9BAB479A3F9DA76CCD65629CCEF78015ADBC2D0D124B3BB2D322FC4D209E417D
+84BC3C758B6AB64A01E25C9C7B71D741AF90A19A339F99A0BE9FC39622F04C6F
+737474CFEC19C890A657BCE192B9DCD8F273CDC5294875DD4507DC5723EBB357
+73DB0933927DC21081E67E5DCF4E41FAA6E00E8DF04128F86348FB0718068FA9
+918319C4EE9D090CDF348153B6CC48648C55E889B4FFD3D75466F1B50C437546
+7DD9CF20980B148F60BB146402DC0732A27F255DCB859CFB6F9D329C12FB14A6
+7824D6DE27B03FF85BC59703A5D6C5B7D1CEBCF3C3FCD71D6D6F0311E41BF8BF
+0609D23C84720FA9EAC961C9D49C2E962D9618C32BAFBAA8CAB0B2F616E57DA6
+8CB44C5595A22377B28599F7D34A3BEA4173E1D31A2A6C5670D1F026EE2092A1
+DD0D2BBACAB46E5B0A7113B1BC379709C5870981E482E01EE3D16AF9ACF1A5D8
+7ABDB4BA5C3B13AF047826F360C8892642B482C3C61FAC97F332888AE156B35C
+5C8415A75B4F0F25F8E95BC4102FEB4A8287C544C99778EB0C163C22481F615B
+0004F764FB7CCB01AE01A614AFC9650D3934F748E8785416BBC89F66C696AF5B
+B5F6F125F115241728D85E7159FCDBB10B64598249BB0E6FF1AF845B0A2370AE
+E6A973023FCAC4BB6158D48B0C928ABC4E29A0DD611D0F5266AAC8239064C266
+82D4D33B032418967406BC98156CFCE1F091F733D8BAB9523690B4D6765DBADC
+210E814DB8715A269474EC0501CF66FA0D8FD224EDDE93AF243032E73714F730
+FB382372C0F9B9372450FA6F13689C9429EDE1A105F234B216263A7D0A917A15
+D1FC128580A16B5572436E398C353A0EC62539CAA188901FC30DF7511C1BF6E3
+B462203AE937653C4562FFFF03078EE7A184F554E6F01932AFD07722A00E50BB
+2D2BB785961F76273A16CEEB0EE833DFE14BBA539CC7E48F67A9D20C94283137
+BE84025E86C714DC9C6FD7CE4D1D0C50B6EDC79E066521FDFAB6285C83A68B4E
+B1A119875B4E45BF5403950A25286214CB4183C345173F72E6ACFEA5C13B4D2D
+FD12BD235193EE6BB66519B553CD963EDD68E7EF9439DF0411C8193ACB183C09
+4143657304B1BE2AB8D2D0203E677FA1DD01152D2ECF9D987B16C3FE0B3F5F12
+5C920243E1CB5FDCBE97DF55102EDED12811F3F7165F4FE1F6FD5A6BA809824C
+041FF9441529509EF4442EA873E8E7FF507607D526DD27315859B31D0AC11475
+53C573EBF9DC37A4667133E99D8AA608ACB729F90B736395211043CCA3272AD1
+470F1EB485629AA8B9DCB56479F734703D859F1E4EE8789FD6F739D0122348F5
+1D487FAF1F24EF7A14CF69ADE7A87550F55F394506BC7627A5E319B30F362528
+8AB497EC03B69B58736A5EE0AD63743E7F22125536104674EA63F9AC5286A746
+47C73EE8E0320E7DC098CF43F23EDEF32D213523125110140F46202435EA8E79
+E285C7F3AA0C5877F75FE0F16BDF478A00A6F380C7B677BE479FE900ED3C4A0C
+832966F634C63211B58E9AAC3A3346ACACBD040164B491287B45E0131479046F
+B430EDCF59B0DB6B0594775AA57CE029EE8DC445463169EA976945A5765AC390
+CA615933FD05173C47D30DD5CCBD56D89B4557C7192C31D7B500B779D7DD3707
+BD4B64980767B6C9A1BC9A948DFB8518AEF581A1D888C6F767F3315EE99F57E8
+4EAA54D04A3A9E34B100024AA7C49DFE273231E3DF17073CCAF5B0EF20566755
+6831F85C57454D1B0A5A8438EFC7F4E396F09CC200643564BADECD2208915FEC
+78E94025CEC8ED965EEE5F6B8BA081478231547355F93491915CFC4DBD619862
+0F99133CE7F44756C593C8DF1874E973237ACB17F9614B79D45672CF62AFE009
+EC61B395BD96B0081DE750421A41E9D474F0E030C6B8591D364F29A6D7246EF1
+6B4CF9B931A9A474011C62D504F408651692921AE83116CA0E4E6F41AF877FC3
+CE77764197719291E68B01570AB7038D91B8B81EA501DCB5ECB6083B6764BE3D
+DF21B4B3A1E1A5C917F324A1CE5AF92BE3B2F8634A140637425F9BDFBD21FF33
+CBA42069981B230D211602FEF410EFDC199B6DF283343FA5E6B4FF2804DE56A1
+61DDC684579F82C65DAC3A4F92B34FFB6273EF4F4591317B8D2250850BBA236B
+C1E36185BC3C8C7A7654B24D7A10A489BDF675F6EFE7B4253F14CB3B5ECD1756
+1882F3D139EB5EC7860D70A176D1536F5119A6C23EE9AE9AB21B586DA19B483C
+6BEBA87C457B9DE3D7C71DD7F97E352B642D84455E44EFC54417ADBE7E190F7B
+7ABF6FA0EA84A394C8316BF420D6E2DE5B867E6D602365925C3ACFC69ED653A1
+DA30FF3B49D407237196B9401B1EDB7EF2260E582D02B18EDD38AC0016F28896
+0A61CA720216012D0FE2B58D5D675D25A679B1D70FAC10A4EB38060C0BB1AD1D
+D1C59BD5F44FDD8768EFBE75B6795543533C02198E21A4B8A5430C2C432E45AA
+0C0937D6CED532EE6714C58ADFE2B15B117E9AEDFFC1E172716C756260BA9931
+23AB837CCC7C36BD6B86B628BAA7D6002720AF00411E9D039E435EE479D5015E
+23DC9F3993546E50A442CD9D0429F7AF22D9F14064CADF2A3062F218582CA520
+3FD8E0F30B224408594EC426C8DEA57ED60FAB24461611E86302C421BA600CDF
+D4EDBF4044F0E2893143D4BABF0A6AA09F28FB4190B779B82A61C65264A199D7
+C2F50BD82837F08970F630E1CC74B4EF421B1032967FEF552DF3C1C83ED995BC
+CB9192ED8AAA906CD9708A4882150B27B1E75FFC0D1383C50BB3E6C36F5CBF28
+C0572BD2F01AFFEE5927EBE3B6CB8FE778ED2B524E252F59AF00A3F8F880116B
+8EA655D9C6A68CAA28DB7A75003D0C3B653C7587BD1A7D93BE73CA6219024EA1
+07C31E7F7BC9B874183C9337538C925226CDC48FA25D51A6A0677A2BFF699AE1
+E28D9E58369BD6AD73ABA706531DE565E1984A9C89D0C1EC6FC030A93D3D863F
+C45EA66F195CFEFF9A03A1673BC544FB4F491AE5E50ECFF7F34B095DA96288F4
+31C02347DCB6792ABE9DE684A1A92318A2BDA38C2D8DDEF29B8FED450DCDCC7A
+5C5D124FF0DA047D37E8874370D5537AEE869E771835EA607E1634BC0707C0FF
+75D5764B867BEDD8FA075F0CBBA7191B3CBAFC9EF8DFE79E9D7FD5A58916101A
+A920F37BC5EC845621EFE3A953C19853C2989FD31952FC4876A8F7C58C4F21C1
+31E6ECE0389BFDC8D6E391B04D443EDEFAEB77985808C398583BC4D8C9979A38
+9842C4FCB7A4E84BD67BE72551A43B2B330293D8655A3D6655A2358E014F5686
+613D19B474AE0A92A80E6E701F4B63EDAF59C3E12DD961A5B413FD1CB5400743
+91F673B3502C6FD90A1349D649EBA4F5D8A6E5AA41F1A4DE1C387E22C9CC2733
+D542291D5B2E5CCD0E1FC1835BD6A74F5DB97FC174730AF33CFE5E68349BEFB6
+F2C76171C578412F075F9730567BE7A2644B17012DDA04D681018CBE09BDFCA6
+1BB460699CBD6006C031A02634BE0B16375FDB9C582EBE6683B60768BC3901E7
+4388A7E058B61713E3046F28F5ABF58417DA878E1870787C472FA08C2FAC7517
+4CE71727BB69D19BB40AEB50F1BD66704EA37D2A0B82F60D72E15440BD27064C
+E67CA41D97349309151DA28E1A7850587569A794E9FE46848A4611066291973C
+A6CD19857B92F0E36B271F24D54ED663A7C64DE3534B0989D41E21E01469AD69
+916AE35C5177C6BA8CEDA45C92694077DF3EBB0377269619F9925876919A472D
+14751E6515118EF9B84A5DD8C92695818BA4C959485EE1EDB6C6D3553B6FBD27
+A0FC42DDF20BB335F7D46F0951C51E9BB69FA6E7C76A8C960FB6A4305FDD2A30
+234A5EFA64C34948422255C14C2A0D8A57174AFB7DF3DB2F520EBB401CA2DD79
+FDF6C624654DFFCEA8FCF5B34C34CAA7C6EAEBA6DC98E8557042126E49E51C3E
+BB7C91497A44A69E4EBCBDC0656AA5A7F419D0443576F530C8136AE8612589CE
+781205654730006F3A39B4F3E5301784F164A2C87C2F86C894EAFB5E79D7231B
+E410219BED0210BADEFCF27EEF683A01FE01DAB70AC8DC4E82ACCF6B5BFB4DAC
+A42AEF344755A06DE8A6BF6F2786435E2EB1D103C8FA4306573BE699571880DA
+53548A1FC1F24E50B3C2BACE9261C0245F671694A0FBFB4ADAD535AB9949C020
+DEFE36F7EA12B3F8D80E3E3D7B3CBBD8B6EB0AD2573DD5DD0B4FABBC790C9F28
+428B33CA533D5A6348D1A64D868863F4385A3F19D9F4766B6B81CF634981090D
+AF0D763F09A2919A9DABC0DC4602D72F8747176F947A92077956FF59FD0D88CF
+FE224B9B16C5DD710E6DE3B94D47DED695BCE5414A3794E4CEB7845915272ECF
+E4A657C7B53DE7DE96A8C901DA24D54A467EE083181CEE606E5917FED2C97728
+57887C7D19EEA950AADF6E8A99798789757BA126D925E330BB7D931FDF4EE14A
+04F58858CE09DCB1F57B8F780DABEDD1C26D72C9A5287C9DD30365693C5DD06D
+7365B309AF1C97BD3443B393309929F6D1AE27A1CB55C2F5085EE81928E138F4
+4FA21E90C89F0397C9CDB4D707780F2418B38D8A8D76793C868D4BBF10AFBCD2
+9BBB8202DCC02C37BE63D3CD22208A23743025921A54307A72037E6356EF807F
+B2E7DF2B94C51F19895C3C059DB4C42C2DBF4E08E27E31A294B580E2367D2F63
+0C074F03DB73EEC7293AB98DEF387B3C18761C716EE02C95315A36D42BC5334D
+984E6E35587BC0711D1B7F8EA8656C8059683C49CA41B0520D6FE1952A1991DC
+659D83269307EAAF5A9CA8000FA086B55587FCD0C798FD93905B1CD88A9AA33E
+9DBC2FE2A89CC800565567422052BCF5BAA443EB441E3B7B6AF0322014458764
+7AAEF162D0E03F28F1D0A0EEED8714442E9DC41FD4B90436DB8A7E3A9431E726
+FAC0CB7151B6236B2438DCE9EE814A358DC10699244FAFB932C928E0E878D91E
+36E840135A9F372A0DC2EECA730E8490F4D42DE218150497C5EE87A5FF5C2282
+3AA9D4B71996F86F8BDA700EBC01E3054459AA3F87CAB9C3A230551D4534C3AD
+18F6C76C41E10DB9DD67D19614A516BDD39C432005676C78B36C53BDB3646934
+3AE6BC84D339851BD4D07CEC26129467C7181760DE58D0A288FF1F0DEE52D68A
+8423FEA92D3D9331F75E3B062BDB37BEE45D5C338BFC462612D1CA5CFF432D7D
+89D34ABEB9F42CB40A63BBECECACC033538136B3F9B81F1230453A52549B648F
+E8AA9EE2B0AE82A1904FB78A6237247DD96B906B82945AAA772DA058B85494B5
+DBF53ADE76C1013C1DCC7A19AA3ADD198E3EEDE3269C4F3A6DFE54CBD17C7608
+3BF7513E37D9C8D688087E2A09B863882D46454A5B99CBFF538C008FA9BADC2C
+004ED4ECE65C4301862323B134BA11C6D4E691AA899C0E83CEA6A625AED13F65
+78D330A389A6D6EC23CD82D70D53D4F571C9D872E1A09679444FE686A12647B1
+6BB67C8AA4D500F6DACCB2E0C682C835D24C646A51259A72ED3E281C93743832
+A51B3B89D38E575B8521A39D87F8105F892AE9BE53FD758B8DBE2021716ACFB7
+350D5408C621CDEDC04E63DC4468C301435C2C2D61F3B2C24117F9ACBCD9E3A6
+BEA36A9A4227287DCACA0EBB1C6267F23BC0C3E0F28A89184FACFB919D49843B
+AEA30EDC40944FFE38FFBD7B33B6B05F5AE1D0E168E924AC698B7200D2E86C14
+E79E6768E27E848768A75DD694B48FE4839058824A9F5C472081962020B96FE8
+45DBD7153E2086C2DECB97B99850286211660573EB090E315BD727C989B8FE41
+D25635F195218A2F15FE8A5C5FAD2857F75969D1257158EE5C52055C1E11D18A
+8770E2DE895D7118B3886FD549441424F56DCB3820D5709B9D838435AAE4D64B
+6F49CB37B640BD905D6C3FC1E53C8304B0EB694269D6C48D81300DD537373040
+65B95EF64F81AEE581FFAFFF8B32DBFC16B4F1F7FF9DDCE9CF5D6A8A6D79E4C4
+209E47E16C32343B7D8B65D863F33717FC01CEF14A0F012805FAA46552535809
+14126B88CCC2F0E276F5EB42E0C7628CB2397645DD951E31566B9D80F4379A57
+8D10288DD980E93AD47F7F5EB41C4E0DE8AFC5118CFE87A804F309C6A9D1E126
+C0912E55D9B1FA95611FE7FD22C722610746316AA8703953AEE8D52F4B67F0E8
+1C12A3A1A38B3AFC87E78B29AB79174E1CB09880DED63F5EE28AE6916E9BDF2D
+3DBBF6F8A09A229BCFE45B37D0E28A3A519DD20CD8B7AFAABCF0EEE058EC5BEC
+98CA3FF46CDB8324A5CFD9985AFD545B1425BA1B1F8A3209D159925194C2C7B4
+F353F587F1CEC839996FB9761DA1343F24A17BBE4206324041E9DB6DC5CFB21E
+789DCC82093269E3D2894773C8BCD25DB0D6B3DBF7A799276936132C262C2F0C
+980D6689EBC8459C62E19C91EF5169439185F8DB0946D7156108A689F9B0A52D
+10E02422207CDF2CEF1C2B5D3D50E4D458B4A6C936CE9E6A6C4975AFD8790E5D
+057FACE7B96263BAE67A549B42F8CA016C5EF42B55C2FDF20D3A25A68B13FA44
+99D57478B9FFB6BACF69CABEA3C64B559A0D0897176CE2BE218396DD2CB25D70
+59BB599060F97D2CA6422F46D28D3FED8AA36FE161A91DADE4B621EC24BEB0DB
+31FAB9F4B67209C5DA12F4AC49B8BADD510C8226962D4657A80DD7DD49104E88
+A0287F75C8784516C98BD7BD15D91F4513384B46BB097291EF6D6229A529BF62
+0A5F4AF3C21150A058B08D0B47DAF540DB98EAAFC88E117BC9DBA9AC19DDD756
+9A90C45BA3E8C37368C7E44BD6BDFD96619ED819CB067ECBC13BE325409987C6
+CB804C705C040AE82EEA129A1A7AD4B7B362E799F2CE5C0390722A16FC60B1E8
+44B0B85D097AE0D5E08DEC18C3E576E22268D7F0CDA46D9469019C20EAE9BA74
+7B49EA6166F5AC94672063D25C4C0E8FCE359712939ACEDFFF9AB5E7442A2A00
+A7E7A05E9E10A209672155C03EB12CD5E80155A5DEE3D503BA08D71E423C472B
+A74CD26E15A200FBAB8E94086928E73860E50BB7389B3A8E0E833ABAC5FF8C62
+B894E007E5C220FAE6D53ADE85C747BD84D88BD0F40132A0D1FE51ECDCE1BE9B
+BD89734A56C3577515520025A7743F45B01D74588DAED6FCC209CC819CE0DC65
+B590337F93D92D71615422728C6A8AA4D357A4E350BF6CE2480D4E1A818EFD9C
+E6243B96F72EF5C5E88645A73189D9772E97911A0713A03201A69D78A98F743C
+C0C8562CD876F8DE0A488CCAA3EC11142190BC32B2D8FFBEE6E155EFD20BB003
+055C74D843F2AB34D9552E5620FACE9E40C04DD84E29A602151B7C3352798963
+94674A8246B77CECFCC9A896B64F296EBD891E669A538343C0394E6634D9BDB7
+AB6D9C584DC7DEDF6AEB695FF83953653CED9E2B7F6E5D2A965B60F1FD3DC752
+3FE4EBD010AD47E0A9FD989B15559783B429F50B3A70A1D8CFCBC150A492A8C6
+4F570111E78A66DB463BB2EA226890FC25BD5CCFAEDAB7DEB2D081480821426B
+45EDFD5C048A41F295415C43E86930C53961D954B54F6886044A1C5F6D2526EF
+F6521BFA9BCEA510AB3E1731719DA2E83729BD08AA2814663532756B1AC5E199
+329025C143B47106919977514AC51B681FBBF5B115AB82A15E24C7315091DFD4
+CD11E813DCFB89355F4CFAFBBD54822018E7EA7ACB3A06DE7B571267E0C66BD5
+6DEFA8A8AED615B9A7F40B138841D094D5BEB32197BF5213BA572AED3C87AC6F
+6ED6356BA2A2B9A3E26E43B3E6780BB66CC93A1A2CE94C90D48ADCA2BE608B64
+7C0C0410A9134B81EF24CCDC7426E5096CAE44EE96D666A4F3F72774105AB03E
+320FC752F294CA8A537BE8EB6FA85F069E6809553D3A9CB3384E132275D2028A
+DC6CE52E75DE9142E8D19C656F7A74D985BEC5367F151A151E5D41346AF70ED3
+14D68F0C83E4EC225E6F60A48200AAA0FAC3725551B8859AF513FFBE2AB3C205
+DCD56B1177021C5D819DC38BA8A042DB92A0A34224E37250AA0F65707C2786C6
+189F518C2E635D327D999949C4358402F4EFB6237C8A0A8BBC01E9B01F58A83E
+3BF161E39EF504F2E31BB62F27B4830EAE9B05977DA47EF338817109E0BA1059
+6DFFC6426DBBCE33297E6D36D3492B098C1691DEA31FDF967BE80808199760C8
+46E9D075B01F433DD5A43A2AD872061B3852B74BB421B3564E57C44ED0DE500B
+D976E02B51C656974673846B1B5E31F7F9EB5FAB81F92F62ED34EA0715950780
+6F5674E2D6120A4B9B89F749120921EE65043A66F0272B75C05BDDD09217A10F
+E9E93E647617CA513F52252556D23F34248D0EBDB3FFCA6BD7C31E3369CB1F0C
+20BF53BDF7C4F7A1C37BAD112254C227FACDFD40CA33EDF4688600E16586A5B1
+D53C2AFEEAA2416B29948B4FA677FC1EAC94B4A7A2AA4EFFA901F90B56BC2F04
+921AAC33FA46982497BD267EC185F64A2C6F51C48691908568A4F9814175AC6B
+E1B34565EF12D99AD27B74481FCBA29E4C58C8D031DAC1E58E24AE5E432C74E4
+CFDA7278C66FE60C11D9501EE25CFB8F816F06D1427D8A8A119F7E9A66471847
+90BEA16129627D6E12463C9DB6E4CBF9AC20F51EEFC808ED48D41F334115616C
+FC0F037AAEAB996F754FA6A8653B8912BA0A9BD0D0EA381B3A54A86155156D1E
+BF1BFF694F9EEA20EBE388D4F01CE5117C0EA6E061B807AD4B53270006E6CC45
+5016272BB7FE8540070D51A260A018E09D9A1C7CB3E3C6409BC1993E59667A42
+049F2393C872D0E8EC41FBC2671D0F5E4B99BDC5AD13F7B0930B881CC049FC39
+938DD4D270BA8FD68DFF2ADCC21C7C24ABD1391C947142F1C7CC6E7EE5D31252
+F84B92C304757C0B8394E9E2C2D4DCEBD7709FA645B883D8A5F9657FE6116F2C
+891F3DB3BD7DEA5922EE488678297C5A043720DDD777451AB916FA664519A6A8
+9BE9214DC67D68FAF516E19E1F65F162C246B6C010911220978C2FAEEA7023CD
+E2C2A175D2C79817AD4E4364090B9C6B95CE86840857599448EA77982CDEE30D
+F4E739DE78F7C1831B2FAD322EB48FCA0ED8FE56A0BE9E26E6921171C31F8E79
+D5A59BC6225A0AA217FEB684D1CCF1B12E21DBEF1F1315C920EB46163B5C2F46
+80669943D09CD519256D5A4DE9144FD5103B52774A530D2A4318E9ABFFEF15A0
+24F0590F23BA7612351FC0BD9E5F9A5A8D6ECB677978C4E2AFC4560986B7A8DD
+0CC30A82C2CBD2707A18D988C164F2B8CED74B1C12991E705F005E3A8D10BB25
+F5A45974096ED5C5F8A09ADA293175C763CDF9C3484C4B9ABA9839BB9028425F
+DD34E700820CA4B2BAF969C1DEEE659A6FF568EDE7B58400C07BDA06310B92EE
+17FEF247A7FAFBB56044FAD23EB2933D8F313A161767FE211FC103F392A9A1E8
+B633A259920A15D19A4F5780C09071ED04C83FBAB9ABF344A1B0F1FBD2A96A87
+E03F2785DD00CFD5B3B95736CFE6315E86E8A5E838F4C02B36859AB4CA203FED
+4AB0D43E2964FEF26993ACA619F1CF12D3DCFBD8E50AD02A72A6593EB876E244
+D5CDFEE1128408A5C10B5E70D680299E8A33489E1179FA0F753B7FABBB826BD1
+39D7F7A8E7C15C359E24B6569640123700FF628B2D76E2B7B2DE7C2F098A7A46
+8309CCDEA49CD277E96366EF221C4DBCCF17882C4565340EA41EBE83998AC89F
+D66825F75F751395FACA772DFCEDA5E3368094CF378C31DF2B405D92690F2546
+AA982FE7F32660E0FB33BF253F632FE978DDAFEECCF840997558C607ECF0CD57
+5CDB3EE71642ADAC37D462F7A23541F850382BC1140C8437FC62C34CD9BE7002
+0C136657F2ED4AF914AD3AEC860B2E873A77C818E491440EEE98075FBD7EE393
+B68FAB94C574EC914FAE259B065C8666CBB2D3604F9FFAA52DEB5F157079D53D
+3FBBCC93C598FD83769A8C039EFA0C7BDC027A34721E437E548F120137EC099B
+15D65CF68B5F2E5ACBD11A46A6E2168F6E38DACB52D0AF949B8BFC8AA92A6C1B
+E5A362B1B05A46F3E58921F6A1CD4C97730B14D31F0C1E2C132D25B2A63D631D
+C65813C00332FB695789D21D9903B3CD1425CC36C25C18C7D49014F85BB771C8
+D0D18204492ECCBF69D97B2342457C95A7CBD46C489690CE6B4A4363653B9D46
+A5A03BB8BC675B56A1CDFC8E0C3BC7DD7E4804E61DD27EB6D25119887EEF49DE
+905543AEA98A60471A3D512D63CFA12F8768CBDCF8F9EDD9AF084027DBF313DD
+059EC75136FC08C22D280B76F1A4AE628CF21DB9A6E567085DCEF55E68812A8D
+F72DFBF59786430216884E02416419FEC67428E36B62093250EE61EDA4E9FDC9
+08F01063F9841E1A5FC54F34A65F738A9E330E8074930BD9E85F05AB0E9DDCF1
+2CCC343C8BA7619FA512292B53F37BC95635A3EE07C3E4E91B123E2CC34EA9F9
+123C38F41B1DF9C2A7034BD05D83CFC2B86D69639B8C34940F53F44D5F549305
+F196464989975EF35F33B2B4B52CA9EDC6B32033B63BB03462CC58BBED662365
+2F36F7A46A371A60B245D53F9A7DAA64428EECD40A8F4C93D460490B092558CB
+647E53E34771DC04DEEB2C285965F4DCF2CCB8669ADB238CC12897F7DF46E6DB
+FD9D5BFBEA1DD262C4CC1B24E681643FAB80B34D057BC920ABAED5B39D2ACFE7
+4CA3A1999ACF8C9AD0F99B12922D37C03D06B77985EF38B3FBCBD6AFD21572BF
+84A7BB8C4ED5C3BE657673F8E9F3A1655C0179A4CA565D3B6F0949B2CBBEC189
+B0B46D5727EA5EDB274B66C9FD872C00969B9C6B7CDC3A8CEC053A443CB847F2
+540FAE81CBE3F6B306D1B8B913919D1B9FC029CD5D414DB2E16C7EC97F0BC73C
+1BDCD5F3FB0695EB84873FA73629005D7CE48A9A1374CD2A0DAC7F507D3F04EA
+A8F71F37B65C4D5F5928C7A59BDB73E1702D4E9508519508DF62DD29AE1209FA
+8766D6311A78B12C830AC0D870CB02DAC0D6434801CB48972C196E0CC92BDDEA
+398622BAA5B384FB8A0396777CF517A08F646774EFD5C6CAB81C37ED7AF68276
+C86AD81C3C41476A6398A6A22D65421526EEC405F6CC9F2520FAD97FFDDBA3EF
+9E8DD5295CE2390650C5B19930B45A410083442196A24413ED58BC3994D003EE
+F13DA0A43E7D99C70365FE768AADD61628BDF66FFC0D4195AE0CB7FF33EE475E
+2B0EB97F66B2FE63D3436568729519B2639BF5AD17F7061BF9F8A2EADDC7F806
+50C1EBC0AF0BAB233868B10EC7711A0C2FFAACDCE3C49D3A0301C49B82A2DD78
+92BD6740EC601CBD20D460B90EED562B2AE48E55A7C28C8643B4DACAE95AD33F
+27F2CB34AC65A0E62BE71CDC3D05361D1F07584945E4E89514C40D8A3132C707
+A4D56B054572CAF5F12E40406C26E5077C9E255516000F1733B136CA5C58961D
+A9B22F6FEE7B57DA278A3F8F2B8A2B52B5E2E1FED54F14AFC9F13B18734E42C5
+C04846F7CEE4700920DAC45D381100CF7D5DF4E601D3B933998D86D5FDFDF666
+CC4ECF675477D74327EAB256DC1727A44C3F7A6A970D9598EB46A5C38E81F3C5
+10D8307C19D849BBEB0C962BFBB37409195756E505278D619A73140B2C661235
+2091B4C6A3C81A3F532B8168E69EB1DA998C84834C2C87A910A2A65B264A20AD
+50F7B5B8DDA82DC3F45F394BAAE1BAAF5FE217BB95A30E2164C3193083013EDB
+950B9F2F8559B483BD35507E77A8C59CE5E6571EF07AA5ADFC51C4E54346AE1E
+6E22EE5A58C7B31687B936299B29547E214971677A0D5FDC566E61EA08E86BC6
+976077F73FBC8EA0CFCA796D37DDF0977130FF25C4791DC6CD5B7450A594BD1B
+291A8650DFFFAB3154F4129AEBE08C3A0F76A61F23A6662795F20B096772DA49
+FDC818E8F431C8D7488139A55443B81474F5D80D63E1CC6B1AA2241C0AEE0169
+9077ED92D2CB61C71F765AEB0A26665F2677D214B6C5EF0111171B165531D3E4
+7E9E43F1659A4F3E96BFE53F74D902BCCB2557013D900D19B86DBEE27F12CE31
+A94697D4DA12D98DF2F197BF7B7F6380E1CD7D1F9E13B65D5841A990642DE6F8
+0F86E9C087D82FD2A903B7C5191D7D87CB2797C3B24432F7D29BB50DE05D37A5
+B9090F2D26B1AF1EF3DF11645E317BBAD8136611F64885A3D635C3C1F1F42995
+83BB3D6719766FE2D016B42753A30887C1D57DF9CB860FAC2F95BF993EB7DC4B
+F61EA29CCCA247F2728D4504648A8EE0B7FA0A766282E63511F89CAD7B612348
+7E83A9D8F233757716321B251D122D9793FCC20090AB7BE19B1575A3AD6CB93B
+9FED5A9A6CDD855A1F09FCBE5C9DD97F93C49FAD92D3DAB4B32DFAE82E36165D
+5A6BFCE2AEA0F568A481C480D75C1F32ABA8FB904CCBF3FA6AAF58C02B501A62
+4D6C1F8F690BB4B7325A31B13A712549AFA18174BDFDA6010BBFECCCDFDB06B9
+406732F56AA41EFBC80266EBF0B9852EE08E76EEB14A276935114FAD24214CB5
+D177262C90AB93798A00D55A152D635C96846D70395C7EAC49F7A750027F9024
+3781BEE23D56131397B4B241BC6976A4F2B04C8C64EFD55E801D833664019765
+7A22B810889C096B55AD2B4D8963CE240D5DF0FDAB71E9091A167A80F5A3418F
+DF87AA78FFB1EFEBD8A2C97E8E7667B289BC23CFC16F0B138CE179402015CC4D
+F36912CAE318490F6A050B56B778DCEDA7AD335FBB6F3F05C526C8B5EF0B7BD2
+DFBCF5FD5C40F39B6A3455B86B34E89060AB0E6AB96C3914019CEE49EED033F2
+EE547725E1EDD60358DDF57F9EC734134515949C482D52079316D9A2481A1547
+94B4CA6724EFABBE3DE13F07951329A119D84A07CA8CDB199704694F4B3AF26B
+95DABE0B18F99025A88898EDE46BB3C314FDDA77018279B5DC8C854096F3C7F5
+4DE88F3BE84881A03C5E19A77B769EC57B4F6E5BB885485CF242A23C6E5FC322
+04511A00F27AB274232A97A2E5C45188538013667C552E804283C579F1700DD8
+B3C70F6D22FE133C15FA6D5095582333F9B4495282BAD0537B90BC6548427F7E
+12C9D744869A3F5F133CB2CA078C83B80F95AAEE5D64203110CA1AF12E5E0273
+298B2EB72DBB5FBC3F6A6D7004FAA17AEFB086870C83E8D742EE560DEAA5F727
+CD7BA16A4D6FAB7ED191AB92BA39300BFB73EE31B7820D85DAE74DE35B2E3FF5
+8879D9D02B251D7903CA30DA07E2B5694F23631CFB5EB08656AECE21A93DA6B9
+EB6CE1A290631B795A55CA75A5EFBC99BD1E21C40D7374181C96B43B696F9079
+E7BC8BCC96044E09E48EAA625B9D5C53CAF79C84E8032A0F976EC2FEEA9583AC
+25DCC02DEC8D4798E0C145CC523E5EEE82A1A73AE0EFBB08876278A7983FFF86
+527052AC0100CB273390888702DA5C62889808C3DC427BCC5B0A8D787102E641
+2ABFCA74C325F26A74AE2CC7637C9996547B34F33CE355165910F2C0E6445E7E
+70DE25D7D187EF97902D4D535956A4ADA1F1FA0CE9881399477A0B72CFB5F841
+1893157F662F071419B5AAB14EE66E1D478AA9DDA4E4DCDAFB7060EC629ADFAF
+5C779DE9AB8A65A65722109954599B931C42DE431F5A988459BE94F48F7D2539
+1A8D09133020EA37FA9C7CF8A32C9C1BAE51E112CFCF59CD7FA6E9676BAFD4D8
+093CBF4FCC3BB2E468ED55E28D75DF47CCF621662632E2087A8227945723823C
+02629CCDF94D5168A3810B815522588487CD8AD69EDE6D7FA593E638F603D808
+0E2DC9278B63534E63D22876BDEE3A7CAB88C637DC55C9D1C4F3309C01DF68F0
+3919523B2CE7CA52961AA3C2E618EFE1BBCD2C8DC65EC648CD380E3421F287C7
+6F7308C13F6D857C74522BE6A0B09E15420CFAAE8DE28CFE6350217DA9DB5083
+D15B0CA455D343119E3C1D25F1CA143D5568D63CE32856F21328D5AAD69236BD
+208BEC83099D6652E91253440A613155EBE7F2D902CAC765F5049FB5433AD361
+7C7EF2BF062877DB1981B9481F961A097D0402CD89E0BFA180027E29B990C2EF
+138AACF0D146CE117990CB9561FA6C0A8D1929D5B8BA4C4D9168D6A744ED4B4F
+457EFD4B36189371E60DCE4D2D97EDE139145241DFB26394A142D4457AFC0E04
+990DBBF7E40FF9CC5B0624E9B898CEED3A63865690D1CA256330F472EFA9059E
+81920A9D365AD4CF9618E64AF8FE19DEFEFAAABF8B878C42C07490AA600C0E56
+76E6C97F5B0038169395855E4338C84108D1ACB59E5482AF5FA034769A116EF2
+F408FDFAF2205DAD5AE5324EE9F1AC7192E070EA40EF350817F8A69D680DCEE2
+1B30277FDCE432D5541D27536E9086C2C74B2B0D5AB976C3E188EBED10777172
+76F7D7F73E38D15D03809B350C2F55E80AB7EB7D4C4C9B7DD97179F36DB5E4F0
+1140662023CA3C389A8B168A68303117179A4AF84A64B2C2A56ACCBECD6A98AA
+14CD43B8CD3FB79202D957E0D5BFFB49967E5421426205FE24C9608E5F591854
+DF895083505CD0A4F53DA06D931AFE3BB68F3FC3DCEC7059D3FF5218BF5F1082
+CDEA29587E7E9E357EC1329411FCCA0C3078E9787A12EA78D59B2E8CF2AF09C8
+DA12B2B0EA4A43283C8FC9AC945EB0E63CCFE272BE758B0F8B2C9BAC46F3BA97
+D05C0E720C584E805589D2804EFEFEDA9962B4CD5B145FF7305FA959B660FC9B
+37C79503EBC2D1639D2593B0A9F24EE3CC07352614C0B6C531585F27CFB6EFCF
+044F2F2A261B0C2D79FF78899DB6B1F2FB06BFAFEB488504D2FD579F55980DFE
+9D15DBCCC176E41EA7AD6364D40D931CE561E0AB57F5FEA21549290E539A3C7F
+DCE12F4ED93538385B2D30DFA578BAC6DC92A144A72D1C2CEA334ACA6F6C2133
+D1996B97AE8B102EC56426ED5D59DBBA11BA7D6FD39A8692F0931B64538975F5
+61B79F8640773407E873FB4714516037A5C6FFA8C796A9B01898CDFDC2A3F2A1
+5D3BD4C09165F6AFA9EEA3E0C84DB1D058A4C54EC0673860170038CC318DCCF7
+1F3960F12AA2C9447090D91B0EF8A320E933FC8E89FDA5D5897266A4D156BDB4
+077745CC076FB9A12F9D3BE989E2F8ABF44F4BF842DF548111DE129B36B535ED
+E5ECF8AB96D94EDB9E0484E00BF942491ED250EA8E062FC59F223A85F26649CC
+AB1AF18824045625756CE044529471B253B1F3B5FA2BBC3DCEDC457C0A42E29D
+7A152AE14C8D60122C5AEAF5D4360E51BE81A84F3A6CB164181DD1B62AB204E2
+3F078794D9FE570D6115B1C9DEA193996CEBDC5A32D8EF3EA3C309B9F87C726C
+5F2957494663A92639A418C450D42D027053DE7342921EEFD3CCF162DBD32E16
+9C8FF39084FE1117958230EF168E6FA9B48590EDC108D7FDCEBD76BAAAFFBD0A
+4EBBA485DEA8C89778456A1A36F420FE78B0A8F854CFDE7E26E76CDC2270C983
+1D5D914F3EEEC7E4105228ADD1646013CAE11C03108C6971EAD9C13524537A4C
+2CC3D193CE5CF0FED9939AF23E241FF6C82FCBE73CACA6B4B6F88C17A18CE4D3
+4F49BEFCF830777A1B26CF228DA61EA5177A826645B18F21C10E06C748E113C9
+03402DFE318270EAA54F518FF635C340FF581055C1529CD6976951F6819D5A45
+A4DD081C55E7597D257DB9E2E3DBD46B0878895155DB0C4D859B1E61291EAFFA
+7F2816E365A5D6AF6EACFD49362833DE3ECA447871D071BEACE9EB8591F31EC7
+CBCE3C2EA428301FCEB42ED2E082F89476F39F7EB993044B8DC23832B25DD3AB
+FD6E0A199A3CF03A79F323FF826682C8FEC47BB2B74C22A92D01F0E0CD8CEBB5
+C59ECEE83A7B02E949225EDEE26D5D11521DB381A26E30CEAC4D8E2FFB87E0F1
+44ED94C0E3C022D4B2DC2922321EEF1BB71DE6C221535B0EB6A9837C8A775440
+BDC58FAA05C859F05A654242BBB4620D92E5E8B3C5A937B98064BF97549E68B8
+8FD29B4E57EE27055217C910A199900E2A465051AE0573E3D46E5CD541BBBA59
+5062CF9444E95536CAB30FDCD35A56AF4F5038E65690633DA9890CE8229F6EB9
+E5BAA68E54F9AF6590B4FDAD42B7BC0A6708A1C2E809B743A5767ED46FCB9847
+8274E288E9B2A49803D238ED5FAEFBDE3863B29D55118E3ADC937E4B02287439
+B452DD41CE8298B10AE99AE275D45C5E0EB5680DDDE9F449855FF97B28AD1A9B
+BE728BC56C8B4632938A4337D794EFDB56050F5459C031DCCBB1CFAEBBA79348
+F5514685F1F16FADF390B55DB5B671D0E020C03C8D301683FDA4BE8CDB3C7948
+2F5648A2E049A495608CE414857236A70AAEF5EBAABAF1A0950A2B0B814AFD0D
+443CD6D2E0365332CEBFD557DD16FE1E3342A85057C5C8337ECEE5466406A324
+B7A5F881BBB2E442C9775A1C33B5321887E3A8E8001ABAA65B1B2BD1191D6659
+3BBD32F2B01A37BBFE2A3964BF37646262E4D667BEBCAF970226BE5AFFB86A1A
+21CC0D74E7376B9634EC8BCC46D551FAA67603D4B707DCBF6C65D932FC76C2B4
+8B2D03F5E29C4E2327F5791CCE1E42395319739422607AFC0B6962680A04A5CE
+B9FCA10C3EA7F9B1CFEA675F44029F68E3C9C0B90CD7751040239137508E1E3F
+1FFCA19DA7B0933ACEB8239703097AFA4DBEC0FD8F94AA7854F83DF191A44326
+EA23CB5F18E342A9110D30A1D9427492564E7CA82FA80CDE8B7ADD8787B3FCDF
+A5D52B14B6147262461F3563101CD20A457672F78F9BCB7F996D7699975C018C
+07ABAE4E0987AEB32A45577BA6157B51E9BBC37839FCBB886B8987389D8C82C2
+0281A89F98874003140328866916A547FF0B47F24982E346FEC11458EF35C95B
+033F35334E2956A631F7192A
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+cleartomark
+{restore}if
+%%EndFont 
+%%BeginFont: CMR10
+%!PS-AdobeFont-1.0: CMR10 003.002
+%%Title: CMR10
+%Version: 003.002
+%%CreationDate: Mon Jul 13 16:17:00 2009
+%%Creator: David M. Jones
+%Copyright: Copyright (c) 1997, 2009 American Mathematical Society
+%Copyright: (<http://www.ams.org>), with Reserved Font Name CMR10.
+% This Font Software is licensed under the SIL Open Font License, Version 1.1.
+% This license is in the accompanying file OFL.txt, and is also
+% available with a FAQ at: http://scripts.sil.org/OFL.
+%%EndComments
+FontDirectory/CMR10 known{/CMR10 findfont dup/UniqueID known{dup
+/UniqueID get 5000793 eq exch/FontType get 1 eq and}{pop false}ifelse
+{save true}{false}ifelse}{false}ifelse
+11 dict begin
+/FontType 1 def
+/FontMatrix [0.001 0 0 0.001 0 0 ]readonly def
+/FontName /CMR10 def
+/FontBBox {-40 -250 1009 750 }readonly def
+/PaintType 0 def
+/FontInfo 9 dict dup begin
+/version (003.002) readonly def
+/Notice (Copyright \050c\051 1997, 2009 American Mathematical Society \050<http://www.ams.org>\051, with Reserved Font Name CMR10.) readonly def
+/FullName (CMR10) readonly def
+/FamilyName (Computer Modern) readonly def
+/Weight (Medium) readonly def
+/ItalicAngle 0 def
+/isFixedPitch false def
+/UnderlinePosition -100 def
+/UnderlineThickness 50 def
+end readonly def
+/Encoding 256 array
+0 1 255 {1 index exch /.notdef put} for
+dup 11 /ff put
+dup 12 /fi put
+dup 13 /fl put
+dup 14 /ffi put
+dup 33 /exclam put
+dup 34 /quotedblright put
+dup 35 /numbersign put
+dup 36 /dollar put
+dup 37 /percent put
+dup 38 /ampersand put
+dup 39 /quoteright put
+dup 40 /parenleft put
+dup 41 /parenright put
+dup 42 /asterisk put
+dup 44 /comma put
+dup 45 /hyphen put
+dup 46 /period put
+dup 47 /slash put
+dup 48 /zero put
+dup 49 /one put
+dup 50 /two put
+dup 51 /three put
+dup 52 /four put
+dup 53 /five put
+dup 54 /six put
+dup 55 /seven put
+dup 56 /eight put
+dup 57 /nine put
+dup 58 /colon put
+dup 59 /semicolon put
+dup 61 /equal put
+dup 63 /question put
+dup 64 /at put
+dup 65 /A put
+dup 66 /B put
+dup 67 /C put
+dup 68 /D put
+dup 69 /E put
+dup 70 /F put
+dup 71 /G put
+dup 72 /H put
+dup 73 /I put
+dup 74 /J put
+dup 75 /K put
+dup 76 /L put
+dup 77 /M put
+dup 78 /N put
+dup 79 /O put
+dup 80 /P put
+dup 81 /Q put
+dup 82 /R put
+dup 83 /S put
+dup 84 /T put
+dup 85 /U put
+dup 86 /V put
+dup 87 /W put
+dup 88 /X put
+dup 89 /Y put
+dup 90 /Z put
+dup 91 /bracketleft put
+dup 92 /quotedblleft put
+dup 93 /bracketright put
+dup 96 /quoteleft put
+dup 97 /a put
+dup 98 /b put
+dup 99 /c put
+dup 100 /d put
+dup 101 /e put
+dup 102 /f put
+dup 103 /g put
+dup 104 /h put
+dup 105 /i put
+dup 106 /j put
+dup 107 /k put
+dup 108 /l put
+dup 109 /m put
+dup 110 /n put
+dup 111 /o put
+dup 112 /p put
+dup 113 /q put
+dup 114 /r put
+dup 115 /s put
+dup 116 /t put
+dup 117 /u put
+dup 118 /v put
+dup 119 /w put
+dup 120 /x put
+dup 121 /y put
+dup 122 /z put
+dup 123 /endash put
+dup 124 /emdash put
+readonly def
+currentdict end
+currentfile eexec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+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+cleartomark
+{restore}if
+%%EndFont 
+%%BeginFont: CMCSC10
+%!PS-AdobeFont-1.0: CMCSC10 003.002
+%%Title: CMCSC10
+%Version: 003.002
+%%CreationDate: Mon Jul 13 16:17:00 2009
+%%Creator: David M. Jones
+%Copyright: Copyright (c) 1997, 2009 American Mathematical Society
+%Copyright: (<http://www.ams.org>), with Reserved Font Name CMCSC10.
+% This Font Software is licensed under the SIL Open Font License, Version 1.1.
+% This license is in the accompanying file OFL.txt, and is also
+% available with a FAQ at: http://scripts.sil.org/OFL.
+%%EndComments
+FontDirectory/CMCSC10 known{/CMCSC10 findfont dup/UniqueID known{dup
+/UniqueID get 5087402 eq exch/FontType get 1 eq and}{pop false}ifelse
+{save true}{false}ifelse}{false}ifelse
+11 dict begin
+/FontType 1 def
+/FontMatrix [0.001 0 0 0.001 0 0 ]readonly def
+/FontName /CMCSC10 def
+/FontBBox {14 -250 1077 750 }readonly def
+/PaintType 0 def
+/FontInfo 10 dict dup begin
+/version (003.002) readonly def
+/Notice (Copyright \050c\051 1997, 2009 American Mathematical Society \050<http://www.ams.org>\051, with Reserved Font Name CMCSC10.) readonly def
+/FullName (CMCSC10) readonly def
+/FamilyName (Computer Modern) readonly def
+/Weight (Medium) readonly def
+/ItalicAngle 0 def
+/isFixedPitch false def
+/UnderlinePosition -100 def
+/UnderlineThickness 50 def
+/ascent 750 def
+end readonly def
+/Encoding 256 array
+0 1 255 {1 index exch /.notdef put} for
+dup 45 /hyphen put
+dup 47 /slash put
+dup 50 /two put
+dup 97 /a put
+dup 98 /b put
+dup 99 /c put
+dup 100 /d put
+dup 101 /e put
+dup 102 /f put
+dup 103 /g put
+dup 105 /i put
+dup 108 /l put
+dup 109 /m put
+dup 110 /n put
+dup 111 /o put
+dup 112 /p put
+dup 114 /r put
+dup 115 /s put
+dup 117 /u put
+dup 120 /x put
+readonly def
+currentdict end
+currentfile eexec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+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+cleartomark
+{restore}if
+%%EndFont 
+%%BeginFont: CMTT12
+%!PS-AdobeFont-1.0: CMTT12 003.002
+%%Title: CMTT12
+%Version: 003.002
+%%CreationDate: Mon Jul 13 16:17:00 2009
+%%Creator: David M. Jones
+%Copyright: Copyright (c) 1997, 2009 American Mathematical Society
+%Copyright: (<http://www.ams.org>), with Reserved Font Name CMTT12.
+% This Font Software is licensed under the SIL Open Font License, Version 1.1.
+% This license is in the accompanying file OFL.txt, and is also
+% available with a FAQ at: http://scripts.sil.org/OFL.
+%%EndComments
+FontDirectory/CMTT12 known{/CMTT12 findfont dup/UniqueID known{dup
+/UniqueID get 5000833 eq exch/FontType get 1 eq and}{pop false}ifelse
+{save true}{false}ifelse}{false}ifelse
+11 dict begin
+/FontType 1 def
+/FontMatrix [0.001 0 0 0.001 0 0 ]readonly def
+/FontName /CMTT12 def
+/FontBBox {-1 -234 524 695 }readonly def
+/PaintType 0 def
+/FontInfo 9 dict dup begin
+/version (003.002) readonly def
+/Notice (Copyright \050c\051 1997, 2009 American Mathematical Society \050<http://www.ams.org>\051, with Reserved Font Name CMTT12.) readonly def
+/FullName (CMTT12) readonly def
+/FamilyName (Computer Modern) readonly def
+/Weight (Medium) readonly def
+/ItalicAngle 0 def
+/isFixedPitch true def
+/UnderlinePosition -100 def
+/UnderlineThickness 50 def
+end readonly def
+/Encoding 256 array
+0 1 255 {1 index exch /.notdef put} for
+dup 45 /hyphen put
+dup 103 /g put
+dup 104 /h put
+dup 105 /i put
+dup 108 /l put
+dup 110 /n put
+dup 111 /o put
+dup 115 /s put
+readonly def
+currentdict end
+currentfile eexec
+D9D66F633B846AB284BCF8B0411B772DE5CE32340DC6F28AF40857E4451976E7
+5182433CF9F333A38BD841C0D4E68BF9E012EB32A8FFB76B5816306B5EDF7C99
+8B3A16D9B4BC056662E32C7CD0123DFAEB734C7532E64BBFBF5A60336E646716
+EFB852C877F440D329172C71F1E5D59CE9473C26B8AEF7AD68EF0727B6EC2E0C
+02CE8D8B07183838330C0284BD419CBDAE42B141D3D4BE492473F240CEED931D
+46E9F999C5CB3235E2C6DAAA2C0169E1991BEAEA0D704BF49CEA3E98E8C2361A
+4B60D020D325E4C2450F3BCF59223103D20DB6943DE1B57D05DA0555DF933BB0
+7B42D264831116C06C79335D519461E7B0E870A6715E3D74A08D1BCF86E3BCC3
+A43FC6BAD1C68BD9D4AFCC06D845FD1F1E70D7A47F0BBCAECE8396E04591E5E3
+4797F646AFEEB7DB548183F0B74C9BB6BA2AA04E7F5950EC8AE97C741D4B2C5C
+A8E7A8DF5A36A30B5A7592D95E1DBC63EF33C92FE459792CED29E2B8B6919251
+75EF62089BD7D44A6E1F9B62EC802FBE62B821DA1C3B2DDED45D27964AD29ED0
+9FB7868F3A8FEADA87A8E42D52C1EB7229D7C79B60BDA263F2BDB025AE14A507
+098FA274206BACFB4A0A7257D5998EE8F0FDCA79CB61DD1FC59DADD11E16BF02
+ECDFD706CDA1E72054D4EB55AF7BA9F19955886BC0BD6E0E3FE3769C94AF3581
+DFB2BCD67FE2892AF07E858A01280194D8DD7332B3D0A585C87FAB056C2EAA9B
+5AD48D1C9F00CEF8EF0D1408DBE1C03D04B231D7B8D5D998FE0CD7EE19828EF2
+F988EBF6DDBFEE00F04A4A1F4E1A55DED7EF3AACEAB5005F1962C724A017C914
+2936E2E0DF26A55ACD7DD836C6035CBF07981C1BCE3615064F0540A1034C69B4
+E3908E76EF8925D486DF0B4A8E1F02D8AA99585A7C31847AB9382F83880C1C21
+C496AB2DF8E7BD4643B28B704B5F6B53429D3EE940A79135F5BF0396E5B46F23
+42AF406C26D12BEA7A41F332AEB75DF43C15334CF4651A99F602036946B1B91D
+4BB0D2E51C20216D892C8173241AC8FD15A37C3CDD8AB4FB67D8565AFA61C068
+95E3D6E46D7C09BBD09428207D506AD43C693F3C3D787F6A5C39084AE45E81C9
+830900DB50DAD10A17E118FB5E9680B5194716A788FF7514A1167DD1A305FBE5
+5925388A2E95AE46E8806E0F7B954D1A9F70EE29B069A9FEB0349298CE5311BB
+CAB039C21AEB714781BBCDBF2FFCBE7C4750D7693ED142ED0475EE9DB5D5F94F
+4D4613E2C379E494464447C4167C625D70B9DBE4756DEF299974B704A3C238DC
+FCD3AD96645559ACA5056F7FD695D2AA709960E30F055ADBDCC7FDF641920A9F
+A279AAB98424E76D01937F9CFE3CF4E3779650D7C2DC38AB27FB81EB16C19B13
+D47E0AC60C83641CCC1A00136625FE274C6AC706B516CBF14C54000BC2B7BD20
+A28D40FCD6D9B321855BDA608E23BD365208DAB23983C0D8A7C9DDC28ED62216
+12A20A3068D843B5FA016B8C6B9BBD36356BF85A128F96F0CE861FB9C998BB21
+E8624E3DE453C686D41DA7B72ABD919C5BE2F24440D11962C77742A8C0115A72
+9E974E71247FCD58318A4347813D4D5A73CF882A7513E2EFE05CE8C7195BDDC7
+DF250B59AD14D02D2991E2D0CF2D0022EF52D78F043D6D7FEEC3E77B6982B1C0
+8CE51E4D3C8342C08ABD84EFCC8239883D8E66CB0FB0BFE8699155B179CCD63E
+884C502F7F0496A01360C67D7A9BFC8533346485646AF058A743472B3276FB96
+EC4C82188A4A67763ABCE6AF7898C3B924A01118DCE34C77F22E62BB4C4CB561
+75C93226142D43D5ECB9F43C3A275A52F9E5AE4C9BB9E614082AAEAC5E7453DE
+B3F71F9FB747033E227E84E853E75E79771B71495CACE8F911329274CE752AFC
+46C993132BA8CF6B9DA2CFC11A0BD57C9A4BC11B7A6D68A4C346D9768E6A6204
+4227F51932162DA350878EF80D0F4084C82CC61F3223010D771EBE7DEC1B80CF
+327393AAD4C689BF6A791CA2925878C51069C4F06ABFA42B66860082301FCA71
+EA52BED540116A9B12D9741A4C078F207F92B78923C7965A47A3130CCAEF480F
+6B4AD58077FBECC4F99F53BC1F4F24CF3777182A7ADC32FE3260C774E5244912
+470697609A0726EECB72390E6C5C5A1204521D45316989E3C0B4D398958D4363
+3C7A4524B500241161C55C4D8C4CB06034BD825AA2CF2A6895BB9A30BFF00422
+553E4346A53B271C70DE5D0A5AEB92F81CAC1A0E75E47229AA80C8DB09EE3B19
+6E9D3EC0E7ECAB7B879C652282A376C52E5BBF5D4BAF051A0A995460B7F427E9
+521743E74783312E8D7100DE1F31C1C7C85DA33D8D0A626E6E6184DDD538EA7F
+46D50247225E036DB3E6072395C88026D429659DFCFC6416D22A9BE285EEA910
+F7B1B74275B8B043721A829F2D4FE6140E5AFB78F0CFCC27FF27ACE773131462
+48B271781695D31C909FED024B2F3220C206B63601A1B02DBBE2C5D94D027982
+F9E7EA6D4B0A812D28855CF62D372A040F138069F7C28BE3344262EA72795CAC
+2CC8E21D1A666ABFED384875FD2D098066FF0CD902AD6725AECFE61B2CD83860
+82E587B8893F5E09B155EBD813030499E534C050D6902E5F8BA296030512ACCE
+BF19933ECDDA6DAAA1848686DAC81EC429CA7AB1A73B7DFEC0750B404F601F1E
+6755F07C0784A56E403C5962905E9147E44E8042C3858E4A91F7B8A71143263C
+21DC47E481DF1A38EC4A9F682FE059FE80F257576FEF3A3300A36BC27273152A
+78019783D0BC34AB29353EDAEDF48FF6C5DC27C1633CE1CE2C03509992549B87
+75AE1100939A6A2F5AA2BC7C534357687DA72129B9C9F2E511BD95452F10DF8C
+A698CEE0BCAF726111B63C4838F05AC5B2EB43D04115145CDBF2EDCC1EFAB612
+5E35EF5CCC5F4296536DC96F1326B86C65DE657BA06E5B97BB7C4F8ED11DF9CD
+969FA4302F06A5D43B48D40D3DE360F6A7B8F329022CF5B13A33980E8BE54325
+17FE37C9D78E73A74B5734231ADF0594A2E5F2DAD9BCB682A0F5C59507032DE3
+AD0C62E50C258F1F820ADF788D6611CBE6D1988D09D07F8813D6A3EDEBE034C8
+05F7EDC5DD2E4C15B60FE9284E267C8F7DF53F3CC13C131201DE819049324E53
+499FE93874A92EF07AD0121B8FDA88F7D60DE52E2B20AF958A77421F221F8B29
+B2188307F484E1832988059E5A68C52AA7E840D805E646F17DFFDCE1A2A8C0B5
+2CF6F218A06EE1E2543461030E9697624B086FC6619205C04230CC8DADA60721
+F5C4622673ACA45BEABBE3941E7F40080D652567DED98AA3404A4384DA3006A4
+E8A9298AC3FEF04C92A273
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+cleartomark
+{restore}if
+%%EndFont 
+%%BeginFont: SFRM1095
+%!FontType1-1.0: SFRM1095 0.3
+%%CreationDate: Wed Sep 12 2001
+% Copyright (c) 2001 Vladimir Volovich <vvv@vsu.ru>.
+% See the file COPYING (GNU General Public License) for license conditions.
+% Converted from METAFONT EC/TC and LH fonts:
+% ecrm1095, tcrm1095, larm1095, lbrm1095, lcrm1095, rxrm1095.
+11 dict begin
+/FontInfo 6 dict dup begin
+/version (0.3) def
+/FullName (Computer Modern Roman) def
+/FamilyName (Computer Modern) def
+/ItalicAngle 0 def
+/isFixedPitch false def
+/Weight (Medium) def
+end readonly def
+/FontName /SFRM1095 def
+/Encoding StandardEncoding def
+/PaintType 0 def
+/FontType 1 def
+/FontMatrix [0.001 0 0 0.001 0 0] def
+/FontBBox{-188 -320 1445 942}readonly def
+currentdict end
+currentfile eexec
+D9D66F633B846A97B686A97E45A3D0AA052BD0CE60552BD63101D7CDBEEF5B11
+69C468645FE4ED1AF2541AA0770C1DCF81623DE0ECDF49F2B522618F650CE6CB
+CC8C21885DD61AF8A523AA677EAEDDFA51A1F9B1885EEE0456196D634E04EF89
+F17499DAD982502ACC349B9EEAAE4A71A73D1147318C60A8BAC10510DE90D8D3
+F46E47295D27129A5AFE0C65E22BAD10D06885A2EE623FF8E1D90287A083E00C
+EF25195F68A2A98170E48759F33528B839DFD4B92DF0482493852D12053A7904
+BF6E144B9488970F220C299E80886366662C1276120E72472BF84082B9EEC729
+F7007ECDC5A850C88810EA679DABE81714004E65D938DA9ABDF29C949A52EF02
+EDA8451563235D51286E9133FFC7A27067DF0332ED614AC2D4FAB88EC84E6CB9
+FAB41C933E84B88097BA8742BC30A81416D1CAA3545F08E2554B28362B99B79E
+FC42281922B94604AABAF5F7A9B8E2D9A4358F38F2382EF9544B859D098DF243
+034CC475CEDEBF0EDD0A60C907127BB32F7D85A62A44E90B4056D9B4B2FF3A49
+786032C6B25794E2C0003C7852C6B0688351FBFC43300FB0B72880BB7B58BB61
+3D1064E7D4DDB128A9B38EF7510B7E5F82BDE39489E2D1DF08816781B13836E4
+89390F84577F31776FE43A5F94F817A4AA4A698AA4AE84B178FCB65F1B5A5CE1
+334417595F6E40849041565BAA497F6E4B8F4305D849128C9A26A98B909EABE9
+8F2659189ED27C588ADC7C744712B4D9AD0C5DD25D1233E979DE7F53C5F1C47C
+E9DF254086E5EC70EBC6B7E080060BA72F15E6BB75C75011B15B7ABB6BF761DD
+428FF1BD688938C75BEABA7DEE2AF49364D2E198FDC7F8FA2313BBE598ED3703
+7ECAAA4670BE3A85C693ACA829A5936778BCDCDB38A5981D4CAC8994E2B2F086
+26D8793AC1393D49A8F2FE391F0EF8899F63CFA5A77BC739C867C6CFB9A226B4
+620AED34573F068052604331B7E8E1F0C3BC0BD7DF733F056DB8C3F57E3035BB
+EC82DF5B511453A952D429AC721A4F94D5C9BA5B83545948643D0596F4C6C9C5
+796BEC7B26EB9D729F337E0FDFA91E5955585C330D0C4F193FAC870A28CE054C
+8942BDA170717B7AE9927C936DF0076507F55CA2979BADD3EFACC0A599933EB6
+F148BB7C3D61066CCC93A5856D253D759F30E37534743210743F0D53F58D0B45
+463F053E19A16E5A1B111915D1E664802F8C6C3ACA0F1BFCF3E209D1FD6C79D1
+5D867E142AD6E69933768274F4E2AB57CC518AD5A1C120887EEDDDF18C291BE7
+B3DB17E8FDB124B11B6142DC60F560DDD668D700614732F3FBAC4637B9F41361
+54CD2D8757A9D9BEDD1EC72FDAAED3CE4A1144F1E919FDB952BA7CA1E3D31C3E
+9E434E2E44E7A83AE3480EBE89E0881584045E4AA5814897382EEE5FB5C9410C
+2DC7A2136551DE2AA713487A77B911A7E7AEE41F0BEA1FDAC1950473B1394479
+513741DE60091BFB9751C780D99F2DADD5AD8283DC9CD1C81B902C9F3C9C3EB9
+55608E09D6DD423540BCF72394A24F81135C9D9063C0F4441BFE0120E03558D3
+4A16744457EC281AB2A60432C97DEDD16B2F1FF4C1A90D72D46C9F9BE984C6E3
+E239F98B59A938C2A6490889B437CFC21D923572530E41B7567A9C7E2464DB2B
+18FAF3EB7CBFE7BED6E77219C0366A7D54D469CE3FF62E75FCA2ED6A46F3E5C4
+489992EE1A42C19DA52F0CB2B1A6956BB3F1767B97FDF225685FF7C9E9243497
+144D31ECF634CABABB79E323CFD483BD7A7B0C2679A9C3DFF0D44F09F084CF3E
+886CBC91C5386A266730CE2AF3863534E2450583F6ABB520C27C4EFEA01EBC8A
+F019D25B7BDB40CD6712D7DF2DEBF0BC70A92D3B64D1FDF723DBF3D4AE939E96
+D93646BAAE0BC57BB244AAF47ADE59A5228F057192D917E2BBBF588335E09095
+1CD4AA406C1D10C8EE6812DA676A8FD166461064BE4150CB95C41FC055FF8FA1
+89A4BAACB0B978A58EDDDB0CBEBF6566D47CC0AFC93110751B59EA33AB5D6EAB
+0DB9A65CB16A053495F06B0D49A70BA8A7826EB571B8428AFE5EBB99AB9B56C6
+F69DCC77C25BBBB53FF25C5DB5CB8E742E3C0BFC25098B4CAEF12D299C886881
+0D4EB71D637BC0CD4D63BD6B4F5FEF9B083D95C34FB9E7BC9FCCAC0B9C7D8AB1
+1816B17AFBFE1DA146662723887E435E17AD2E2315AD800EBEE700B3C12B50EF
+4A48C2839AB4BB367E908F59BB5AB88635C3E1B89948BE9F32EFEDC2E439CC79
+BD9754280477F7C982850438092D309C213D70F8D476728119E8FA03762C22B8
+89AC2A2A7C0BEBB0C91CAA95BCCDF91AA918766C82A978B7313870327F89107E
+11A44FF02F597C8D4B085F6D7A098233ADADA521CDF34A78081F8965DCA615FB
+55DB12C1E3459E49C273ABD2663B13447365C9C1C52E192282E96049FD58506F
+FBC9507DDD77014C29275D1352CD5FC765853E858A5781F2DA41360D32FB5A54
+D04E088FD99F8C01DF740E587AACB0E431E03E170CBDA9FF1FCDE8D9FF5E43A5
+73166AF5990B238122AB322F709FEF2F0E2FA7C04FBB62C5383997BC9CFAC8EE
+3FAD26E788DB37ECB388CD80A7D861AA9E9199E7BD065BD7A4D21A0D56DA9323
+2AFAE158CBB662283EA7310D32FB5A54D04E088FD99F8C01DF7535A5156B8344
+F1CCDE84A46AB2CC7F0CFD113074A1C4D90758EE58F61589051A0150121A7BAB
+A636171E6814A1398DCB9F13FE9B11ED5A5F2EEAC14E0C831B2540D10BC0EDAE
+833A83965A33180B0AEA361848DF8FE8E50DF6856F1D10C8EE6BB5198CFB7607
+B6B044160CBE8D4CFF067DF3579918B19B9128C2A83512FC0567CF47B38961BD
+CC60FB8C6330A30AFEA9B276DA89313D6A83343298F34461B13C382575BE392E
+F94E3EA3004D6D37C025DA3F1846E41606DD510D2C7D0BE9DD194E46BE7CAAF7
+A60D496CE85D2393457C50B2D586E010C7C4C7272F496F0CED0084EA956455F6
+2EE57D13B6485B968190360A3E30210D2664BF91C73AD1A811651CAC09A9DC0E
+3A328E1DCA16082699B41A3D533703E58E366E871C982F262478E41DA3483028
+6BDBF03E444C6F0F4DA2CE9AB049F324F887732D21C4BF9C5365C603C9971CFA
+7E45249203329FB9B4054B163C166E1322DED12CAAE39E289C126301D25076D0
+2FD409FABA5247D7A25945AD5881E18C2DAEC09606228CF925557DDFA155400F
+8D446CFB8AD19704B6C544CFCE47ACCB854A74DEB5C646318679DD738987F800
+96844722729076811B5054DA998F9AEBE37DE5068418F41A007E645599C0BC21
+8363573C695B3F68111CE4A6199C8BD40D61E46A153C3C25D0C7DC125415D125
+D0C6130BB6B603ED78153E0CFE7384F7481FD4EDA141C27898B3636398EFBBC1
+9E81060816655B2F7052016A4C72A6A1CDB83BCCB2EB475A9BE17EB08A5ADA04
+CA8AACF6FE68BBDE580243B111BE76EC06E70CB7751A8B206143D0134BF52670
+BB3F44DD8AA7D26283A483CB46286EE0A9BB4FDB0337342BBF362C236C30A120
+D85812760265E3B283F48C05E78F47CF5C678F54658A30EBD7AAD5840F3C7B9E
+21D8CA390CFD164792FF2040E07FA087FDA110A93430C7FAD65C951AEEF79D91
+FC25EC950E250511BB22156C2886A249CD442575934D385554B2B4534AC28C31
+43A657DC937CFAF3F6C87EF4F2826BB02C41DB634D91B70BCCC4F83F4C32796F
+C5664490597DA5F2CAC7C0013B18373EF51520DFE081F95E0C1693D02E39AA2B
+E356FD312C233285B2A8C8C337504C1EA7E9E1F6BD250B5874842F68C92DA11D
+F74E6068495709EDCC6E4BB3A96AA3A4C89411FF06B66DA03FCBB052CF5DE837
+4834FDB84E2248DBC10CD7454636E97E399A7AC5A16A2191D763AFC09588F5EE
+57E80130CBDAF18FE2F530BDBD2CFC21D684AF84A8CA37BF2258C80CA61485BB
+27EFEBB52E5FDDA77E57AC8EEB3811BE2BC948A926FBBBAE974D9CE89333C945
+A9DFE37E5F34BA68EE97019BDBDAC7482826B8F71EC51A777B64C52B1C37326D
+1172F83F6E4DF93B37E66CDD6344810758B10B2EA8C68918DBDBC72F8821F1E1
+96AB78288A2E00C2E03FA05640009DD0EB0D0D318C6A726DE5D8F2B1B035C658
+D09053A4B27B18F18BE4396C900A730908D832F3E8A21C36E32F2D603D0263C0
+8EADB43290CC59C43AD57D357057B13C9ABE55F11DAAA8D78574C430939CEF9E
+FB36B462DA71CFB6E86C72ACAA04D5FE4732AC386F52D4AC92C47F9B11FC32E5
+B188AF2890EE3786AE2772D2FBC5D75A7FC59B0519F32D930B71AAEC8B88F1F5
+DCBACC2CBB9951DCC8F21A26F197A309C26ABBC4C25E3FF22B2A511A96F0BFF1
+2BD9AA37DA5DDDF261EAB0E48C62DE0885B8D074A7642D59C8E216B5F0A8B327
+1794E0BA5B672E41832562DE119AC5DA1AFB74AA66885ADB605AF60B44C1D904
+EF85F00E1F143A19DAC00F751E77EE62D394ACD26B463F7C7EBE4EFD40DD93F8
+81C2956C4250F5F28207671D7AFB3AC09FDD0126533384CF1B2004F31E053135
+44EDCAD0114140E52B7E153C354CF3F2BF37A15E2D19A2ED688710B6F9F83C5B
+BA14795934112F7963FFD217F016DE82353B915549CECBDF7BDFC6FA4F7B74BE
+E202170C9F25C7448970684BC555C8390E34A5098F55E0B003B841CAE775D48C
+1603730AF8C091C0622640AC5A0B46757165B44F0AE1EC1072DA26A8EE0DA335
+A6BC8AF994F5508921F3D9E4E09B375A58ACBB9E6B0448903E19A5CF2A51F619
+81D2A539A4556B9C25722D4DFAAB480586C90874DCDFC2D70716B18572557BE9
+E9CAB7F5A3959D5419DD9FEC22D015EBB5D4BB5CABE110D76E8A76D6EF3513DB
+5C23D3AE05BEFA77BF6B4ED5C413E8DB87B5ABD1B2FA9B3BF37A81C784ABC42B
+1FEFDE6DF012974241B33B67AA67FA38798336F7354F0984D612DBB455D0662B
+C8F15F12DA07E391480C1A150213ABBBB0F2927D223D5752B69C930053655C34
+FC487DD271A8AF594F457F6A083C4150686FBCBD60832E4E7D0D4987CAE5484B
+CA81A230A21F9C49DFBEB24C94C93ADC954B9B3B3EC484C502BD0DFD605F6D5E
+13158237535FA2EADA044ADCC1E1AD42918C8C67320F6621369C250D5335FC05
+AFEA1B294EA5D2A6F335FADB80CB26FCE9EBC0A4EBF72DD47806EBA23C3BCD77
+7F175E2041EA03E2F0B2BD2B81E9A6DD43BA3486375883C30B8606D917C678B6
+6E567A92A0E0DE89BEE5E5AC45C9202D46EED5E045302B71EABAC5FD997A9A7D
+8F522B2CA316B7FDF16CE4981DBC25E4E2FCE3981324B16A18236476FE242584
+AE70C683199B7647325D295528EB7CB15A7E3940FE2D248945015E9DEEB9EB26
+7012041740F5A2A6C7DB7B2358EBC0358E9385E734D208957ADFC7DEF83F5E5F
+4EDE55E2F078E994312214EEAF63F8D0B481C3D523E712901AD838AF2D840055
+E57D34F8FDD4C842D64D3D94B1CA46CEADF497A2FC75A45AC59F8696DE49672E
+E33773AEB31A204F01793262E820E813949115DB90A7C798BDDEA0D5D1E699ED
+753593F2B6373BD24D4647CF35A448037ED5E72DF3175DD6744ABAA0E2E0864A
+2F4EFF3B07B035520A598CDF1AA97D7DC3057414513DDDDE40C2A9DEFB23631C
+B2291ECEEF4D18652CEA451BB1559C0743FE3205BFB6711F1026A613D244BB07
+DB3830F07F32EA637775BCC1B2CEF0C6B0D119AF6CCA17DB1B03AB1E9281C568
+33502239B067013D261BBF33358AAB8803C451B2F570EC34BBA052170AB42F95
+F9386DA11A2C7BB9C05E8C9FDC96111549EAC90DFD8DC906C03F0281C40EC1BF
+EB6B15455CF32FCE5C7DF6F55C91132223FD13FBD62A787EB15CF3E4E6E59AB7
+A529DA186B178CC6E8A4D876794527F3AD72FA86B7C2BAE14D3E5A41D8F90754
+AA28185D92C9ECBBDE4EE53E2BBDF05AB4C9700C1367B3D81FFC1AA34A79CEC1
+1CA7D422CB58C8E21870F680E48EB1B2D5A30D974A7E9B24DE13958976C76225
+45415635E32FF316DC4A69B3CD5EFC6EF5F845C8E24C92166C9076691817FA6E
+AA5D1F1CE12235DEA3902F3C355CBDA5CC344376A5394AAA7C2CB50BCF32DB50
+4B6D9BED63F0A8928C0C06829558B714FD54F355501EEBE29882185A6CA1703F
+6AE65F03CB07406324CCDF00093EBC76627A11A84B5EDB688D20DF49616D8D3F
+7491719761E7627CF8FDCFC0DD2265160BEB33ADBE3AD01E7464370E3E0F9D45
+51FC9A87C678EAE5B16A564333DB11687FCB4D1D82C75A2F551FB4F940E0C71D
+74CFDDA0974D787BE959B2B87FE13DC290C53819DBDC2081CCD16F34F0A61AF4
+3CF53914B713820BF8F2243C0679345EFD56307165AEDF16E3BC771EFBFF595E
+C6B1DB8B028342D5DA1E8CF3FF4269126B48BDDE9BEEF7896CBA70EC77063CFB
+0EB3C6FF697509736BCACAA7F03C4C326875396F0499B198DAF7842384C36C2F
+36B17A65A1D9FB77649DD78499592C817679F344E0B88D80B8D78EEF9EC6A9FF
+41F4D635520B2269035CEDDCB3B5518D63DEBAD4F365A70533AE119F11323AB2
+EF07047536DA6370C07B2215C3A82BFDB44DA593C6B3A33BACC38A105BEA2109
+06DC63737E3EB362A122FE90CE8EF37B9C73FA6933BF27C39EBDE137F15AC495
+7F58F6549759FFD86C2BD3A09490AB47B60E204B16910AFB0C18E4F2361AA033
+9BE5EF972F4B52F18548E3CB947F083768C7254FC019CBD8C4DE7E01DFA456A1
+065EF834C7B146FD395ADBB9FB72B8EABF58EE9E2B2276C87FB83CEAD49BBA55
+7DA56ECA50BE1AE4819EA3C72DBE30F363D43C75287945B0DE47D1FF0283C494
+EA65527E8708279B3B2437BF1CA2456E260020E4FC0A85BA18562CDB8261FDBE
+0B928EF40F0DD40E215B8BBD40BB5B5DCF2FD9AB4D5AF64F82EC77BFF8C37BE3
+74BB9B2E44C819E84CE2C634D55A9EEB4F6DA28025C3831B601AD254108178F3
+3EC068E78ED8C72AFC5C3BE0BFE17F31A23B55E7158FFC40381F36DFEB6612EF
+33A54D2004D92F0A44B3468DBAC0ED5E34F70561F5E77DA369754685B7F6B04F
+233454A59AFDF45F28383B05B6120717744B58D2A96BA706CC9317B5E7FD0848
+56665EB38E31C7F8C87B0C65041A5D2E349CB4264523AABF9C10CA95CDD3BE1D
+9923C1A11D046FFC2E82A09E36ED0146978DC383AC6D70EABB20327360CF7EE1
+DC4DE736760F5CF3B47F7BA082DCBF881ED8DEBC1A4580C287418295CFEBFB01
+51B09DFC98C8A8C9C5F9AAA6971CA95D96A23166E5931F7E464B288F4E357112
+4111BB33FB7F0E042448478D3ED7AAEA57D1B0B4E237F919152F8D9E86229BFC
+B8D59BF9FB9E0062A3ED67A367669D0F2F8EFEB2219E5FFE7400A9DC725ADA62
+706D4D1860BC04D4432F49D7F4271376678D381B148D72DAD9012173FF3779A1
+7C4D92B28D3117888C864440902499FF0F9BEAB0C83FBD788E26B0BA47484188
+FC01B0349E045421E7D912E1BD329A536F61169344F16D65F6B90DB87E22F72D
+8E6F486F8D21E6DAE282C35A2723464F560CAD8B31A931CCA7A2FDB9530769FC
+BE0A5F66F1D4DBC0EAF834D078CFAFA415F43DC87AC62A1D8913334016B3FF37
+20902A7E5644848A57346228A13D7B1C757DFA9B5FC4E9E1DCB2C2AA2FD37386
+87E6B350662256D158D8C7DCD2F7AB1E02D6C5C8E3ECB1C6055A6C0B807B8FF7
+997E562EDBEDF7646B64165A55DED91178BF13FD30ADC1A6B6D621B1A7AEE1F4
+2E30D49CF3BD0656F584CECE76A17151913D7ADB223727B47EB3D7F491385112
+D36848973526DDAD7C1C1C0FB672EC627172D10DD33ADF2445483470F28AF65F
+29CB086189B3FFA31E0CDA710B6DE2B0EE515A46A3FCFC354AF01AF5C5D0B301
+C8FDEADC6DB9D492554777965E2751A715F8FFB6E0248AC51928DD65CA4F6574
+BB1E01B3ED95D736691EBEA8ADFCD8265F128A67C372720840A206056F66A7A4
+10E1722E4C1BDEA8C980250F9E034C29FE0F7D2F5DAACAE3173C865CA9C4C240
+49B6D4D0CD90B75D3BC68B8C84605923075A9A2D5D6F7008365E52796975CCA5
+02770D168EAF28C337D45762A08817666907C68142CFAB9D75C4F6D6A73FB4C0
+748F038F140CB009A24A80270037C9B5E514E04AEAD7CA8468C4D22E1059F2D2
+EA0E7CA2979C7066F1629B49FDB893DBECF6620FF9C48132297E81F717820A90
+BDB45E16CA1D0D9C152B12D50AF4E1B2519FBB2B779218C5E42E31FDF82448E3
+5AFC5F90AA018902EFFC4D5A14D4326911F7055F9B7AC5B592E2E2D3A198E2C7
+F476CB49DBA0FFB2CAAF494DAD087639203084CEA25DED422E0F8A30634FF1DF
+EE5C61FEEC33D547A17961534B3535AA673AE15F560DDFF08EA7AC126882B57F
+A1AE8A5313E6D21F67FB6D16AD32690FCE021616D0DB89C51001090A4A7FB515
+139B751F6137DFEA833004F4689474DE3A8FF64D98EF09D25802C3B35DD2DED9
+FB5300E4F50E5CC70FAD3A21917D15D5DAAFE30DC1CCF79A359B81AA3F21359D
+297B9795636C03E483A80D47A4826930854329FAC093193AEE3A19BA91063421
+988EA0ACD987862A716C42F071140254B72AC91B91911CD6A9D275FD7F6636B7
+4B1B0A47FD39120411E1D5442E711A6C1EB0741C67B0A44C1A2F98C9FF245A9D
+5AE4A04B529CC5FDBABB1C6E8C1590B3CE658EB77B58F4D04803DC351C5645D0
+4DB49D76906E068C3FB553AE91FDFF5F22F734DC4BF8E9D019B06D3A1BB7CDCE
+9101E9D2276CCACFB36B9EC74AD213BCE896FAC45D08EBE43E676816DDA135EA
+8B78003042DA8581975D4C14CBDECE0B027AE87DF28611F387E64B951812C848
+B661FCC0DF91B39DEF14976D7D00609DE2DB8195C186E376F4029CBACE3AF24D
+AABB788FB1AC87D58BF341F95EC2DBD14BFF27D3DAD9A06569FD4EEE40C516AC
+D809E761BFCA049DCD6F8E43E60A0BFE64BCB922D1989CC14EAC1987147A5559
+4F1CA14635DF029AC387BE36036BAEA8AE7DD09D090EBE271FE59FD806894A72
+61C714D6D08322726CAAF168C08CE31F26CDF6613C06CC50DBD59B70DA211B44
+1BFA22AD62D56AD098FFB998E25FABBD89A2C17EB7A3AE81F79C05AA4677D744
+7F412484C16CFB322FABEACF98AF9F152E3217D0F2593D6863E7872C5B6F82BB
+FDFD09B13FA639680E972DC7B086D7DAAB076CF346814556119BDFBDC3A16374
+E7B92CE50B3BEE8B7C26856BDD3C2ED98337C2B877ED5EE4878C50F06A64F750
+E9C8CA83B7FE6C91E10FA717CCEC0D2F8E21CB5A2367B5C90A81897B6973FAD7
+D4D95F6BEDE4E1EBE6D852A937D5D814AA6BA62324C08AC12FC09C5037588F7B
+1B043BC503D725EC657F47DE02CBA939ECD8418F4B7C705EDA3E9AF1E623A989
+074165DB0DDD59B7ECF513C714B7D0A1013E4E3F2B071F6A6DB89B7BBC2774B8
+87ADA7C572B0AA702156B715159829BA38A9EC28E1CF3494B0CEC876A97B4617
+2CC9162F204C36850CA9188B0B97300CDB1AB4F57B55D39BC539BFA5047B032F
+02A88CDF11D098FD30F6A6B82B98AB9D288570FE18E4E6A707179D96287D438F
+2D5D3C2305C5FAF075E0979EAB1DB645AD9DC87A621219C260FF67C2DB8D541F
+8BE9E20ACDCF64C4C721AEF5B2B65761D0310CEF36B1A3E57092DEFB978A43F8
+B553169F523517518CA0618E31F9A5940EDA42D8B9D851AD1E77BC1C0C8EED23
+F469B0568B5A556A5FD5A20F5F4E00FA6F030ECC5E711865F1549E409792F7DA
+D1FFD1BE1E6DD22619163B98EB0425319E738254ADA0AE57FE29E121B0D8F172
+DD717E0B59842BE9F6B37FEC3F1BBECE15664851EDA3DA3A1848191C38F2CF60
+7A262D4440322C26150C605AADAD4EC3EF0CA22D6A2F63BE63C9C08EA643B68B
+9C88ED95D2F2F0868CC40278DC2752A1E61C793FB87EE69A6D348F98A0174B09
+5AE09E214EDA066174A6823347B831ADF2619281E43A71D549FE194D5AD4ED5B
+1DE112CA90BB9D92C57FC3D89F1A57F7CEF2ACE8E944B8B725557F567D9DFC72
+3D28B0E11DA3F81633C042B5FD05513542A2B431B3744E2E9581ED828F5F8A8A
+C600F526EA874274FEB94E64F0AD787F47C98899DAA4552E447D4B97B3774334
+8DF26A38D7CD36EA79B64CB31DB0302BFD0DD2280E10FFDEF59E2D1F6452FB09
+E2A7015523BC1A46AC2F816135FD4EC198D30E95203ECD2623E83FFC1436FF74
+068CFF87C1ABDE2D31AD1FEEE6031D889A25B9F2C05036F16BBDC143705545D8
+4D14A2467639644AFF1D239BB08AA769BB5476DD4FE9974DC01E85C02F82958C
+12C3AAE071BF1E57C358F72290F15A2655C1C79DB5E5264133AD0139F9F9B540
+972A3FD82BF0377FDB8711A746B9F4C6016172C30CB33CEC0B327DA0DE2668BB
+CD41
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+cleartomark
+%%EndFont 
+%%BeginFont: CMBX12
+%!PS-AdobeFont-1.0: CMBX12 003.002
+%%Title: CMBX12
+%Version: 003.002
+%%CreationDate: Mon Jul 13 16:17:00 2009
+%%Creator: David M. Jones
+%Copyright: Copyright (c) 1997, 2009 American Mathematical Society
+%Copyright: (<http://www.ams.org>), with Reserved Font Name CMBX12.
+% This Font Software is licensed under the SIL Open Font License, Version 1.1.
+% This license is in the accompanying file OFL.txt, and is also
+% available with a FAQ at: http://scripts.sil.org/OFL.
+%%EndComments
+FontDirectory/CMBX12 known{/CMBX12 findfont dup/UniqueID known{dup
+/UniqueID get 5000769 eq exch/FontType get 1 eq and}{pop false}ifelse
+{save true}{false}ifelse}{false}ifelse
+11 dict begin
+/FontType 1 def
+/FontMatrix [0.001 0 0 0.001 0 0 ]readonly def
+/FontName /CMBX12 def
+/FontBBox {-53 -251 1139 750 }readonly def
+/PaintType 0 def
+/FontInfo 9 dict dup begin
+/version (003.002) readonly def
+/Notice (Copyright \050c\051 1997, 2009 American Mathematical Society \050<http://www.ams.org>\051, with Reserved Font Name CMBX12.) readonly def
+/FullName (CMBX12) readonly def
+/FamilyName (Computer Modern) readonly def
+/Weight (Bold) readonly def
+/ItalicAngle 0 def
+/isFixedPitch false def
+/UnderlinePosition -100 def
+/UnderlineThickness 50 def
+end readonly def
+/Encoding 256 array
+0 1 255 {1 index exch /.notdef put} for
+dup 11 /ff put
+dup 12 /fi put
+dup 33 /exclam put
+dup 35 /numbersign put
+dup 36 /dollar put
+dup 42 /asterisk put
+dup 44 /comma put
+dup 45 /hyphen put
+dup 46 /period put
+dup 48 /zero put
+dup 49 /one put
+dup 50 /two put
+dup 51 /three put
+dup 52 /four put
+dup 53 /five put
+dup 54 /six put
+dup 55 /seven put
+dup 56 /eight put
+dup 57 /nine put
+dup 58 /colon put
+dup 63 /question put
+dup 64 /at put
+dup 65 /A put
+dup 66 /B put
+dup 67 /C put
+dup 68 /D put
+dup 69 /E put
+dup 70 /F put
+dup 71 /G put
+dup 72 /H put
+dup 73 /I put
+dup 74 /J put
+dup 75 /K put
+dup 76 /L put
+dup 77 /M put
+dup 78 /N put
+dup 79 /O put
+dup 80 /P put
+dup 81 /Q put
+dup 82 /R put
+dup 83 /S put
+dup 84 /T put
+dup 85 /U put
+dup 86 /V put
+dup 87 /W put
+dup 88 /X put
+dup 89 /Y put
+dup 91 /bracketleft put
+dup 93 /bracketright put
+dup 97 /a put
+dup 98 /b put
+dup 99 /c put
+dup 100 /d put
+dup 101 /e put
+dup 102 /f put
+dup 103 /g put
+dup 104 /h put
+dup 105 /i put
+dup 106 /j put
+dup 107 /k put
+dup 108 /l put
+dup 109 /m put
+dup 110 /n put
+dup 111 /o put
+dup 112 /p put
+dup 113 /q put
+dup 114 /r put
+dup 115 /s put
+dup 116 /t put
+dup 117 /u put
+dup 118 /v put
+dup 119 /w put
+dup 120 /x put
+dup 121 /y put
+dup 123 /endash put
+readonly def
+currentdict end
+currentfile eexec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+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+cleartomark
+{restore}if
+%%EndFont 
+%%BeginFont: CMTI10
+%!PS-AdobeFont-1.0: CMTI10 003.002
+%%Title: CMTI10
+%Version: 003.002
+%%CreationDate: Mon Jul 13 16:17:00 2009
+%%Creator: David M. Jones
+%Copyright: Copyright (c) 1997, 2009 American Mathematical Society
+%Copyright: (<http://www.ams.org>), with Reserved Font Name CMTI10.
+% This Font Software is licensed under the SIL Open Font License, Version 1.1.
+% This license is in the accompanying file OFL.txt, and is also
+% available with a FAQ at: http://scripts.sil.org/OFL.
+%%EndComments
+FontDirectory/CMTI10 known{/CMTI10 findfont dup/UniqueID known{dup
+/UniqueID get 5000828 eq exch/FontType get 1 eq and}{pop false}ifelse
+{save true}{false}ifelse}{false}ifelse
+11 dict begin
+/FontType 1 def
+/FontMatrix [0.001 0 0 0.001 0 0 ]readonly def
+/FontName /CMTI10 def
+/FontBBox {-35 -250 1124 750 }readonly def
+/PaintType 0 def
+/FontInfo 9 dict dup begin
+/version (003.002) readonly def
+/Notice (Copyright \050c\051 1997, 2009 American Mathematical Society \050<http://www.ams.org>\051, with Reserved Font Name CMTI10.) readonly def
+/FullName (CMTI10) readonly def
+/FamilyName (Computer Modern) readonly def
+/Weight (Medium) readonly def
+/ItalicAngle -14.04 def
+/isFixedPitch false def
+/UnderlinePosition -100 def
+/UnderlineThickness 50 def
+end readonly def
+/Encoding 256 array
+0 1 255 {1 index exch /.notdef put} for
+dup 12 /fi put
+dup 45 /hyphen put
+dup 97 /a put
+dup 99 /c put
+dup 100 /d put
+dup 101 /e put
+dup 103 /g put
+dup 105 /i put
+dup 107 /k put
+dup 108 /l put
+dup 109 /m put
+dup 110 /n put
+dup 111 /o put
+dup 112 /p put
+dup 114 /r put
+dup 115 /s put
+dup 116 /t put
+dup 118 /v put
+dup 120 /x put
+readonly def
+currentdict end
+currentfile eexec
+D9D66F633B846AB284BCF8B0411B772DE5CE32340DC6F28AF40857E4451976E7
+5182433CF9F333A38BD841C0D4E68BF9E012EB32A8FFB76B5816306B5EDF7C99
+8B3A16D9B4BC056662E32C7CD0123DFAEB734C7532E64BBFBF5A60336E646716
+EFB852C877F440D329172C71F1E5D59CE9473C26B8AEF7AD68EF0727B6EC2E0C
+02CE8D8B07183838330C0284BD419CBDAE42B141D3D4BE492473F240CEED931D
+46E9F999C5CB3235E2C6DAAA2C0169E1991BEAEA0D704BF49CEA3E98E8C2361A
+4B60D020D325E4C2450F3BCF59223103D20DB6943DE1B57C5FD29DA32D34C95E
+2AB2ADB3F60EEB0600C8ADE15A2380DE10AC5AAD585FBD13097B1A7E8E210D4A
+EE96785449E07F0C8EBC2EC5EFBFD0897DFDC15E5BFAC9584D8DE95C5AB288CD
+8AD8B9BEF0B8E5F887B3B0B331542FC8184DCCB753DB6ACEEF98B85756B988DF
+CAF1AE0DBE7D37D5F44A2E760AAE3A5197C27B15E32275A64946C3E4D0476FD2
+7FDE148C788DD2106F7C825E270588AC05B57E625AB17BDD02306F9E5FC851DC
+32A5A6EDC43C770A71419B2C0C8074EF3F222C8A2097CD81A91F333A521B3A09
+482A4FE1CB231CE344AD126AA284C3280AAC3AD162CF0EE241BFB4C8F20502FF
+118507F5D1B5FD898571015E73E5CF2281085072E00D401F6F59761EEC3E8381
+1F26F75DB66C504AB6BABA87D121B1E7040A07AA2FE01F80DBC246CC03C4B2DC
+C2A715980C52B7F96BC1A78FCC7F4F52EEED5F705E08FC1E5BBFCAD121FA88AA
+8EBE58172C162AF409DBB0728F14923ED02A65EA24E5D52B6AD07777455A70A4
+61833D3789C719BA92E901232599767E423D5AD9C807670BE0E7B5CFF8256A20
+C7BF7214FFE0342809570F5966A2C43E784F35015D9040BA34FEAB6A6F089504
+3A40A9E9D711A2721D3F4998371430FB3C94BFC619559B97D49627BB630F4B70
+9D0A8FE4E916235335C3962F3CFDB04C4A3CF714DB5E260F4E66FFF2F27CEF2A
+D4AA26BBCAED23B8BDC98F8F453BA27AD7758537561E766B82DC3032E92A9EB0
+125D98A22C5466AF069BF72A9BFA052A8628FEC6A6AD0B711DFFEDE3AA2D7CE8
+34EA487038EF50F953B8B4471CBA6FC3C53877EC1BC94582B1123EDF44B4056A
+30F49394BDE22CDAD7F01951C7013D26979277D18EFA594E8F4F2B5E615187D9
+39E842EC28461B9ABA52020A127D2CB9002A673A435B13C10602EEFDBBA6BD49
+9DDEAB9E68D655443A5C2492BA061C1391A51592BA8C353A6F6A0708E8860184
+2B5D031D2CAB87D618E9F6F7A0BF3F66B3FD5A25BB91F7F1F5F99CFF56EFF4FF
+0A35C55658001ED2E97B26C869292F6274D433A5443179DBB8EE987196306348
+3F9E87C6422AFFDD30080C9AC4EE7FE5E2DCBFEE4974331F4AAE479FD8806D4D
+9C2B85FC69EB0453AD827A1E767E5C484BDFBF5C8D6E2B3C96298B390F22D757
+802643A79D5E29CF3AEDF0E12CFBECA4663444FC87F2027571DBA9ECF688BF28
+FF0DDB3AEDBA0FB28447CB4B5D5205F40C1E7A525FD7373392EEFFD910AC82D0
+98E71660A1B3227C4A2592F3E853CA4CDF64DF19A52582E167234F4036FAAAB9
+5446BE102DE2BF43E82F0112C2A20F15A3F92C6571AC761665A905362C4F8BDF
+AC8705519C99862CD9C0D75113C4AB5FBB83C880E46B82715B5628890D9103AD
+A2329638B95D93C4DECDC5E6C588C9D5183EE6FC28FAF9825F02DCA567306D93
+5440987A81B51EE7291107A08F201C609FEF91A8F0587E8B13D4BAF74A5A6815
+DE9E4441F46AF8E1DDDFA2D611C889614040B144A5EC064DEE4638C04EAB2E37
+4CA8F50FB8C4D65BB296DCCCD39F1F554CFBED96670A91F515CA10EF896874BC
+8EF48C6447752C70FF5A06F928DB55586354076773BFF7E94C4C3A7A1C1F421B
+A9B4E3936EC26E0C19BBBFC90F021E877F54B62108F6DD1C7F6D5B8E64FC9362
+E173F01BF2904B7E5A08B3543611562C2714099DE7D4FA330DB148B560A9601F
+42A84452811CE213DCE782A0D7809CFD954D6BC1EBF2BA4D1B18F50FA8174C96
+3E0120E266AD5DDB40B3F6798AC28CDC5C3C4BC34583528F5B5DC8A222B80B59
+A3A93DC715D061EC6915E6E6E21A25425C25E8747C60F170D61047108826F96F
+7830E220C108B441B6EA3198E33C49BAD8D43086E49F5A2BC7958A1A8CD011C4
+49045193394696EC3DDD0BE084E8F2E9F0B9496F035C0DEC1CE11409DF566428
+D50043CFF5CDD1092F6E0807E660B68163BCA738E8D98FC6EE3F713164CD204C
+0BA84FFF4F33F47BC31750B448603D7ADB9AE92FA91AEBBBEC0DCD66980E6955
+CEB425ED07115B24E40F53B29B9D840842EAC691B4F591F866DF27556474B485
+1C6F53DD72499847109B16C7093984A6B8487D4F3870DD517945CD90E648C1BB
+8A6861E540FCF9D75B984B5009B5CC760CBE297042C240DD624111670B703388
+6FE6FC0E89C6B4C88F51DFF3913D0CC1FB4770C8CBEADD4B86393605C0B6C468
+83CA5594754411B6FC331EF56D7CD6D247FAE42E966583C29239A8F862348D29
+60B177984B6B957E733DB4D275015691D91443BBB13C2DA96097A29733CDB284
+42F89C85A7A743338C9DD3BBC4EE53F695E5163E6E1ABE5791ABF100B198B9B2
+1C21E2FA2FB4AFE7F9BB2D381260CDD3A2CC05BF513AA1E80ED69FA27BC5ED5A
+21445BF00BC2F997B356D94AF13736C6D3B0613EB6F4CD96A685FEB672661DCA
+206105EDC3CA07900676EB2FAB37F48D2E8207BDE1463894DA3C5B1488AC1EE9
+D39DAF691648048F5D7A384B8927F8DA2BE3602669F71D80686E427F395134E7
+7ADCC611BA91AD4B7A0237213C60CF2C905359C90795230344FC3C50A22BD44B
+55B2044792509F50F5C21F53D9F9E9F063ADBED3AB99E2613B23334FE8DF70B4
+6120F2EDF69F50BE793EE145B9FF9C73179DE640FC2ACEB5C6617F918CEEB762
+4CD81E665B2E544864D13230B058717B207D3CC5D6647D5343DB4D0356082392
+871EFFA896631A7E0D6477942B632074A9A4EF7B09D4701B1639BAAB4E03A40E
+9B54A7A4F845CD63F88831EBFA4FB847847CB98F3455CB5957F2E0A0F5623645
+DBB5C5564C7F8B117D6E27E65C0F3EA81AE67B4AE4B201E7C4FB0A8364FE53F5
+41A7CE8F834C2C4B322809B353A5E63BBA7BF3B7DC1A85EA700BD287C2BD3FC8
+2832B0BB4695FC937FF5EF06FCD87DCE6DE793C2B1EE10E6450352C17726155F
+220D550B1759E15AB2C1D5968E52C8080CD280E99D3CCC0E80C2EF8BBFD96001
+A226FEED7311EFB4B67F424B557A877379A15BCA54780F0CD2CCA00400B9B39D
+981C6B552AFD2506D1B23618FA9AE6D8143CD7198A8482CB416CCE62B992347F
+337D505A4078713BBD91E5535BD58EF0351EBDCD749CC24D4AD39F8CECD7D6C8
+139756680A4C03A58B3374CEC658D30160AE4863A3938A891BB59CBE02BB451B
+1BA4B2B6E68AB61DEB85F95E3C909B8B66E220B9F18280161C279F10F7093CDC
+100A53D542F071CC0A5AF834DC1D18738F5DD62A5573E884E1FFD22BD810828A
+1EA47F8218C15A2E97CBC609927DA3CC2B802EA4A0D7EB57627C135E3B065905
+F97597D818A2C5CC6F328AD25AD11FA50F1E4FE637980B7474D6F85A521892FB
+72989AABEBE02A2D0EFE88A6F67AC29F5D8DDFEDAAF465C439983C6B84389FF7
+A6434462BEB7B07DBE4BBA61ACD4A60C55B5C0AAE527DE381DFECA2E6BAFDC8D
+310364ECB42CAFF72BA93C067B2F02D1CA7C34AE7CDC46787A0E234C8BE8A928
+7A6F3DDE0338FAD532A9886E8E3525B85DD39364AB03EC4C0DD25DC179CC1989
+1BE232E387E857C78332D834679195E10F1E7B87B7966DA3B2238F53D1E13FE2
+8F55ED6A92A750C7250C9B91E29796621E7E9520373214D7DA81B2875A986D33
+80382AFF6DE1F829F048E57664D9C4ACE91E4684A51023943A4964AB5657D610
+3A5405EFD4CFD1EBA684243E15093C9667797BB47617B66054EE02C41FFEC45C
+C1BAE8AD56B00D323FCB1D2744F061FA16E161988741A319B1564E04BA210996
+4F9F02A3268CABE450D166A763F5284954564A1C86B76544C5F5ACDFE0D758DB
+865A1CFCF9FE8CD5F9C3B2998C56468FD52DF8EE60C6935A3D221EAEC7714E3B
+301371C7DDA0B03A2416238F2B47BAD3A2C5021C886DF51C695AF9C87A864B48
+3BB3FE0B355EED5454B59B25A0D8A1B8CBD356C24F64D9B55E16C30C011365C9
+1E0380753BA3EDC0868788D5F50B9353D0227BCEE1BE36998B2622C0759BD66B
+E4444250589F9CEDE766D8B940770CB6B89503E925B35C00CBEC2873D2DC4A29
+0823FB7A3717B69A7DEDBAAECC067949932728E89BEECAA91DE3AF9BF070B9C0
+30EEFA8C0A55C8388CAA2F0515915C98E67FA095BB98967D14B0DCAFA9622E4E
+2E0EBFC768D80585ACDF28D8A5C2B6EE2FE7AAF62FFB90F569F84A0903996DF0
+C1D5723366C436E4088F3E2BB9B47F9789052A71CF5C49908CDC1DDA194BFB89
+14D7E3D7D4D72A150FD6FFD8303E9DE5A97A71B808B8BDF2AE466F31BF5D7A4A
+44F81230BBE2B456A221E2F72A8B59F8FEA8D31F8A005A5BD93B9F49CFDC3DCC
+CE2B67090460F632271C7157BDC2F05BC2749FD562FC28682A616A52D1B67654
+DF78B7843A9EC26A7DE2EB168F874904C2915B97534B2D4D9F74A9573A771D34
+9F7BC855E8F794621BF6AD471BCC347E2DF5F620F5C209E33A4CBF1EA85AEA87
+4492A77342DD33EF615FF34037D660B713C908786D9022051B825226545827A3
+2AD1B05D654DB6E6D261B4E8AF0933AD1F0FCFC7201E1A7C1B4199F160C38676
+21ABA2DDF1CEB655B3EC3226E0B122976EEA998F7A5241F062E54AD1DFD6ED26
+47C99A439E0AE95415059179867CDD3F0FF751F3141309F40E00A6C7C28433E4
+F649BCD5DAA64177580E05C495EE7BCBCC5FBF104DAF360CC2711386655B26F9
+D349D887EEB32ADE595241560FD5924A1745A22E6A01DB9C285EF14596EBFF0F
+03F36EB2E0A7C3864F819EF7B0855121292D49482F046A55CD7271FE03F02EA5
+886864D9D8EC22A68C23089EAEFFF03DED6484D8C341861EF8B6FD3C5BDF5AC8
+352DA4E13A1E30D0CB71E090E9CFB9AB2CAFD0CA7C34AE7D8E3B2EB4666834BD
+9CCD1AC2108348AFEF6071796F4BB2FFA4A67ED917E76A109FA2DC2A30D744A0
+9AE653A748C1D18FB52595D84E87F1C1FB6B2F32667FE203262C66627AEFFED3
+92B23861E5EB238BB4EDCE09DAE1C65BAFC198CDD1B45D42CDF93E16BB82D35F
+821E9E49067E966AFAB2AB52928F8DD6359984071FC37AA652FB834A09E5BD93
+3AFAE161140E74C6531E413E8FBBFC42BFE8A464B71EB1D8CAA93B33D7BCC3B0
+47C7EEFCD3E9FCF26FF9441DD9BDE68D77AD7251C06BBB9A2103049E8827CAF0
+F26BEF33F656A690235DEEC623CC519AFA82DE2AE16FB99F780FD7D8290DA40B
+9B604AEF36B529FD184239E7D50561A07428D28E51B55546590A1AEAD4B7F2B1
+AB8C5B9022C1FA03E33F8F409B24911AB8BFCF6EF4A8E415263C789F89063E71
+C0910DC20347469380B7FC1EEB87D4CED7F4A361E58B61C91AFCABA35C03F978
+B9FB5257C31657EE48504C355CE893FE3C553274C641DBC4004F5D5B879CC5ED
+D3F21F867F6DF054127067DE86189F0B59A1B90FDABCDFEE61423609D888EEFD
+F4A1367129962110C651D9481CEDDB8C5C2576A59AED64E95F7ED042AEAE2F7E
+81AC0C408E593DC30DCAC334EDE9EE27D932B98F040DDCD195D6155607DD2038
+970EB78221A94C52BD4F0EAC65F1FC10E5DAA93C17266F351669CAE56F42B68C
+6D01E1EA03AE554D63CE76D800FDD9CFD89F80A241EAEFF7EDFA41794EA25CE7
+97BD5028464D2CD45B53834B4AEF8BF0B9E7C6ECDEACEC887E8790A47A93F668
+A9095E5FA1116A122C0E5B74E2226C654D3187C6CFD8807917820423DA3EC1DE
+AA020EEEF2280C44A15209EE2F3FC1776875308CEAD38571E7BF889F287E4594
+971A83605E0B4169D4A23EE790515223DF8724054EDAD905F57918FC0BC64F96
+514B4BF7DC9BA79E763C22C977FB6146B10D26FEA1BAA7BAF21312F78D1625A7
+8E242D743471DB5821408AB786E4A7EA9D35E30E85533C617689F95758FB2C7C
+392E759C299DCCE36689686DE0C4DCE32649493650BA194A6208C5EAB670B170
+3F2C70BF0EF0E3BE2FB0A79224FF4ECECD6BB3388C6D06867A0E5E3DB93C1B2F
+464C23E44D3132E7D4086E3B59B1D13F49EB4772DEDF8EDC4F603217233FB7BE
+C13C28648E9AA51D53F11FB896839F97AEDD8834BCA53CB0021AE91FD8E95E2E
+F8A094093AF556B9639F508A401542B06821FF9DE1A745FE9AC5CACD5E8E1053
+911442FC15CA5333751ABFE2C617D38FA1DC332BFEF44AE569DC631C93EC54D6
+261583A695F5A392867A57F59B741EFCD2DCFECBC55D1EA5F2317601C9DFE9ED
+D1EA466210FFA905A8F85BD58B98991BEA58DFD1CDED5C9B086D42CCE632DADA
+147941917B879139E016B0DDEB8446BA017FC8EE5A354533D667B0835F5D027D
+C2D580C16B80B3D05CC92C0465CAE077729F0A15B2DAFC89DCD349B3F81D0516
+C65526EB5C10E45A8A85D716EE35FB9AB201FD7C89ADE5AD925A174169DA20FB
+61E96C73A143DF964C20589EF24A0FCFE6195317F2FA0D2249C0D8E649C3D9AD
+FF13332EA2E4C9CD36D8443EC8F027B61CEF92C6A6B72DD4ACBACC16E429A9A3
+F5F29C1631360E32F8C1C93ACB22F810B86D2969A7480F486F62F8488BEEC74C
+2C1AF13BB92BC578E8CD30BEA6BC8CB68ED730F54CED0167605FA76AD7B7E88C
+7AE7688E598F91C471BD65A542E96D64B1EAF19FB4F1234308C48C2DC86E2193
+11ABDB4C6189C6F201627C693691A86DD07FF55C30FDB3F72381E09C6080FD7C
+9182762E5001E30F52A216E0B71E4D2D4E2F3B20F95DF3A11FDB2D2B5B5FAA66
+C46226D5E0C77066349770514E5675550FAC9394FB27CD2C2F974F1FD58C04A3
+1EF53A8AB3B2202CCA1CEFA66228E1480A0709436C44BD3319C40CF888AE4692
+5DBBB52B15CF3A518F627F672135A24D5DB9B2EBEF04C860AECF231EBB5A3BF5
+6DCCD5E72FE4B6DD29E896691868A7DE4120AD06AC573F5608B8449B38E71CA0
+EB5CDA3F942482EA7973661170F81DC88D54DD5B92323F46F833DFA757107E9E
+F62A47CC50FAA1B68ED535C3E0E1073532A05ED339C8D70B3B9864808ABACD23
+AA95E9FDA43D54C66A675FA074E0A5B8777D3C07850A09087F36852B5351F35D
+8BC4DDFCA35CF29CD5E3DE118A741FAC4DED36847F2E2C6CFE08669301722D94
+376F540982958074E7F1383C409652F6C99DA39FE90B38221E75BC1ECB93ABF6
+B00F410A0C5651DB418566AB350FDA1789AFD88286AF3BCB42B98386F7BC144B
+02DEB8940D20A6B3062F0C4244EABC50923390064F1D027A8BACC3DE45156E56
+4A942D1B87F1C4A76B0D4D6801AE792CCAE3009BF25368B31B6AD5476FBD3BFF
+9759EF463EF5E78E10B7BF64005B2ABE0E8813950A08A1808587A98E0021D0DD
+751AD515E8278F1A0759E85D8A084490BBB0F8206484AA36388B1013643D3198
+3509078847BDAE08E76FA5BF3E3A73C323CE093DCC148E3C02C2DE1E26C94D5A
+40EC8308ECB02FF7DD04EC1005A2A0DC74D4E587F10A3EF349E828F69FD38962
+2F0C74D5DAB3ED6CC9F97008ACCE74C086A503948DEF1AAF58FC8BEC703CD360
+D32098A56AC776B1BD08442052A2A4EF6C8798F7CDC102AF1A2009657254762A
+0793F79A39DCD6ADBAA5EC84A7ED6018BBE727E5D477893D84F157074B24C13E
+8D4881C7DF8ADC13EBA0D89745EF93B7616EC5355600BB0D2B630AABA3CF2946
+AFFD0B2B724EF0F28393F2034B2E69DA5061426805353EB4D80E20739BC4C510
+6C45275B8261DCBA10DE1D104B12F46ACD230977EE7D7D1D35D2814139E38C4B
+CA6937CCFA653349B1EF64A98457F7B4B5D8F2978F16ECCEF7054905863AA46E
+DD524CB33459220C71E9EFA7845A3A760A507B3D3ABC525B35930B613710A13D
+098832C58EBBC8B0CA6AD516E6385792C59220331D0922A1F6F838A8DE13C337
+900462F952EABBDC2EB1FBF94A66186C177501453CD3FE3582073DD86F04406B
+41B6AEB440DA475E13240445D46726A6D45185D56BAB8807CEC8A8F7CE1AD149
+7CE2E1BB5DE4E5B9592241DD136479A65905FD0062C91DFF7349874BFEA5D9EA
+2F610ADB9AE7757B2307A1BB9D6797D9F9C4844A59841C7C7682105E23A374BC
+A91885E7410F56F60C29AB8B417E2D6092F8BB70A2DD5DEDD4BA1077D7CC62FD
+EA43428C6F79C332342E15F75B08A1ED360B3511F823E75AD49BA7AE63B19238
+2AFE8FAC2715E2FDC895E95036D23127557837506A3B542B0E4651CE2B89C252
+31EE8ADC26E2C04E8E30A9CA12F066CE01953BE7867171FF6C7E834742C36C3B
+58E74E4B482CB85FD4D24DB03D753F260A585D552CDC9E1941446F2F5B45FF24
+2DA4932B973139F328E7E92828B900BFD398B6F41DAA0D6861C66AA7F5E3299C
+87A5925CE0E0F9E09AAE0792954A1F2C0AAA8288DEEFFE579E38A3CE8A943EB4
+55322A87C1634074EBEC25F724DC1BCC1BC10458CA6C4395659B0DB6B612C151
+557CC669D8DC37769E59A5AC6BF061C79FEE265DBB59520EB8FFEA273601D1E8
+2984B8AE31AE343F37D03E2BF97DC48AFE50BB6138C7B9F9B5E28672A37BD8F5
+8F8C98DC43DB22C6537028798198E2D3B0453ED72487267D653DD50F1BBBDA92
+833A987A95FC1F275B90B581B4BB62B6863A4CFAE37F715EDF3EA5A33679FEB6
+4847ABB4B3D170C275B9F1AC3156D731198DACE0B051674E85B758500AC9FBEE
+ECC75EBBD85F8D62AAA328FB09C6526F853077AEF7EFBFC2B6A29D6D508B1E19
+EAFA4C67EEE44045B9F15B9762B3DDF5CE5C18B23A5C2F73A1F6DF7F8679AB78
+843AA41FD2A7DC02B45B729EB76C66A89F5F76E5C4A0C0563B1EC5E75D72EE35
+A7F1FC89216B60D82F6F2B8DBE85E4FF4D63712C689E696F60B52AB622C2A4F9
+37C380775EDB72638D3F81F61D8D74C76D813DDFFF35ABD9A502F2BC7FF65754
+2A8660A5A53E0CDC2E8A95B6E33CA153EB711DC796D313C8183D707D3F0E3EE8
+BA65E0FCE3F1C07F3D93F77056688B5496AE35A6BA0B59619DE78640A8C3F7D9
+7DC5E94894E1E63A7D80600B945B1CCA50F1B85F57673C6CE09EFC4E229D4635
+48AB466118D273BAF7C1B52A067A88C00EBFA7FCB378F1575BC0145F294E6F7F
+8007602C6560476FA20BDB91831B22404DB1C4C167594B1216C25226D262FEC6
+F5D0DBAC4B8D743C669CFF2068CB9BCD2DAE8CD6EE1B33BBF7514C4E5EA79D46
+11AAEEA72B791C22A1822E686F3858E95A37D9CEF904EDEC7EBFB0E60995CF64
+57CF0EAAE6D4925126349DE06E101868BED82BB51E911852E6780772912570AF
+CD5690C6DA70110DD9903BAA3BAD581D206571D1E57712C75D112254C7A3DC8C
+892B66CA346EE682E7D910343C1CCD07465D9E49489839BEDA6174FB2E0DB935
+2D2CBA6B67ADDA1BAA6A51690A10C819692C9BD35BDC689F9DEFEA78BFE79C47
+C9CCFB3D04D20F1D3E0B73498FC0BDC50A3BA6DDB3FAB9458803BB26487C1397
+511717CA3493A7590E27B34C2E2E1BE2ED884CAFD5F7C185CD6EDA68951673D6
+384E6CD12944F86D178E73C8D78D9048A5B1E2FCB489E723F8178F842B362BC9
+F3E4D511B369670908B2C8087AA29F8B592B8AF7018311C0F12A8D45A3625096
+D4C88B19890571C60821F38310685F8DEE7A7A5D209265986F92AAF11143DC85
+F435BC210621851001B6A402E3A07D0F204A3B0D75DA3CD7FF6637D1F434B962
+F404DB3C6BC318EF517AA0836A975C5196976250B5D6B21DF528FB47181F5279
+E1EEBBA0F344D7EABE71904B5C1DB0FD07694C469085D50DF4990E294334E785
+5E5BCC4ADCD38685147CE535B23F3027AAC01A0D65AC751D9CA289B4A8906A64
+165427976FE6FD699442196B0C247C960C9086AB2E440885D11BDD314A3FFD40
+9C5FFF29B40110381ED22F58CA53CB2407E5B993930DE5E32CBC4CDB2FC46604
+AE51C1375F9A41D7B5CB2B2FA52F65CB925BDA5CE18BDCFC46933071789E3F20
+C08FC64F367F409C38279E5F88EDFBEE38105A2469CF009344F9E846419519E5
+8A5EC45DE2F6837C65A883C524305D18769A563691F5887D920CAA8EF0D9D56F
+F208395E7390570C6DBBE5AF515BF64478059F922068F0E473C020E54CEBF22D
+495D5E843839912C58FDE0A61D4E390E4502E9973562BCA49B3A17BCAC0352AE
+5C27DA44578C4FA5821B9A3B03FFAA97E15E83CE09AE155BE919EA42301E6195
+F59C0A9131C4089E97223BF614A37B5C7603190DD465105AD86DFEB74E65479B
+BBCEC9EF93508604339454483E244A348A78F29EC4A60554E77136749A4A74BE
+F4DE4955FFDB6AEEBE19705EA184605994D2A5284C05A479A33D56FF398DDF3C
+5B474F53743255BD5F42DADADD7F71BAC446A10084DE15876FF74765654405C3
+470144E2902EF213A594FB721D0B0FD823DAC347777B7AA58688EA834514299F
+75A3C80BCF2FD24D19650B7D2C21ED664D290EFB9122C125F5DE1B2C4A817905
+06C27E7188C9BF3965A6A25A5A9C0353A53D05BF64FD4C226837AF6D9599BE70
+04142CC78E03626BF10D68CE17C2D081B3A4248FF392E985A6946D89BE97AF1B
+C6BE7E9820405D06F5FFC06D6304028E5697E8AE15225A8FE19CDF3DFA2079A8
+BA537833DDBEB6106BAADD45E9ABD1C7B5157C5CB26F971B0E7EE8069E3C8FD4
+A7A1833B19CB43DE4E7497D505AE0B7BFEBB3E489315842DCB3D6CB7E6E43AEE
+E215D011B2854A3CEE5AADB34A9CB5AE595F2F02CC5CAEA9AB28161FD93F3FD5
+87D17D564939ED05A5055029D1AAAD21726C1AEFA777EFEDF8D687D9F2FCA607
+CE3B585E044A8CFFBD6E93849467378BAE5AB8C02615AA974546C3D7AD70AF26
+55C62A9C4EFE256B5303BBD0B9E13544F408F8AFD7265425BE1421FE6B1E41E3
+B6D9C509B4EB820507F2B41A92F93A584AF62987450095DCE78F9862284F0C53
+F46B02549CA9EA57C9C4CA8A0BC1EBE947AFE73B8F7958853BEAF81D78E23C25
+3BEB6EC3823E1DC7524E38CD63577795EC3DDE03027369957906C85A22F9D805
+2EBD287C2CAEE0D3985264AE614380E421EF23453A68F6E616B3191B506113AD
+F6D569E4A20D3B23961DFB3ECE07B382AFD2CCB1F2BC4F3C1974C06C8652682B
+EE7ED59D4B2F9EB8492FF978747AB12E123932B34C0F9F3335587C7B8B8E13A4
+0E1EE5212AB1671DD7A2AB5AF2373B60B3353C22FF8128198A5245F9C701B6E9
+80E92AB14A77AE7BA217D33ABDED222EEE9B5888AC6653459EA8738703FF7423
+8391380AF83E56A3BDFD3AD43F2F00E87DB9153D99A3B358A38313A7E6D6B43B
+07804A9929FE01EE112C0B1960B286C97E7F563D552250DEB189F3467ADE8491
+9C25A473EC8D590BC6EE6E7F340991D4317F1F0E29737ED93D18BA4DEF6A6C0C
+F9A71EFDDBE489F1A5E27699F8C120DDBC96C4F3F3F2F90AC5014F78AF6517F3
+3C8E2B548C7BD7CA91ABC4E71930761D5C609CCB41B7CE490389C7CA6B1A7B34
+7130074DADA12806475998153EC604A5FD7A04AF35D00DA9564123A384E39126
+B228353532842504229FD646A0FA1C24AC462A75A119743C17071D0F3C370D04
+2FBBB8155EC868014066C6EFEA257752846195C4158AF9DF215C8B20AE276F50
+67AB636CF7A49D34B26435233460DFF6F728E91F1FC4224A7AB1C991C94D3224
+E75B5764642BF2972C9F72A347861CA23B78BD37E0902CE7E3776E347AB20388
+2F97386F31D1D41B43B5A1F52C11C908155E7C3AD9C818BD5F8AB022FE979EFC
+695DB2B79BE6264EF7DEBC936048FF17E81408CC701C0B1C742B11F6D9442E4D
+2BE899B3D354D07CDD71FB19ED3972363ACB918BF229ECDF8C5D6F9ABD5263A1
+81A0BB786D0A859C53BBEEF61872E24BB550FDEF14A66FB0C09836F4677DD4FF
+26FB82FFD120F2F8947B51B0A38F47E65A8019C88A1C343E144F7CCDD1E9C541
+640452BFC800ACD27D181077E8F59E12CFFD7C67DF26CD9DE94B87A16BCA14D5
+9EC57D1963A82E2E1667BA64E7C10015A22C4C6FA06B9D76A9CF591FBD2003C9
+116043C62347D68F99214E90E01E80D140B1D3E8AF7526C17AC8A2056B63E192
+031101D44760E5679C4FFA2FF739CBA5A80AE9F95DDD80973F32D0411F9A43A3
+887CB08E116C823DF5921C157390E1568C76B82DD9A7C69FC76501712D2F24DE
+7478B1FF5F7C648754860E394340F17D90865DF0D75A1A7770C177ED1052E10A
+2A60B370A9DE3A6876B9E102A6706E464A91DFF642F498162C9BDB4F0827AA54
+0D1F36557B76DC6FAB62E52078C40F608CBE6C447CCD32A29C9751C53ED48951
+3E2466B2BC8C28CF21A439CF54B50E6DEA50761A23333E8E96233215BE86B870
+461D46D227790B1E65198B0C32C44F9861B94EDC731836D157B0B3419AB6AA9F
+41BEF201D3637F1F6C3F7DCB71BD670EC111B24C411D0AE3310DFC4C9279BCB8
+F5D936F0211B5FC10B7957259D2C3874724EDF11A646D951E79CD958B60EB6E8
+071CD06657B15B5D0BF492312911076FA5E74F7DD94729A1A17393FE5891280B
+D0BA2F31DFA6B3E01C0C0F662D02EF94590EDA84EDEFE9F28F5E7DE75B79D8F9
+4178ACBA78D1F147820EF76DB4850910C3249DCE6EA13C1161DA6EC36BC129FF
+E9C97EFAF481A1605F788CDD66DAC83A95BF09FA47850FA0D7A844AB7014D9C4
+95A1C6AF0D3AA8A0DBE08FAF4E4FF7D6039F6115845EF41EEBC31D1D6B2CA95C
+FB29A10E77935F79EC66A5D14FA898CF1347CA2502496BFC44DC1057AD6B00D9
+E22C8A982C04B48494C7B1C630FFB2FD1701F65B0558C5A2BE9C5A017B3788A4
+B9A22CA8E87600A54D570A6391D814FB95FCCA3631B123AD03A9EE0ECF9A8B6B
+A5C050A34767371D99220A3395B8EEE63067AD64C93F4323A1C33BAAB8ED8B85
+FB1F71CCB36B381463157A5F19F0CD76CA14C77839BE94271264F5B454044D8F
+4458AF7DC8A85ACD3EC014E424D102D2FED460A7AC342E23B960846056031213
+25CAE1315149CC2069E8963AB540265026F4B11BABD9C4711875217188D5B5DB
+6E9CC8E436A56D53B37809295276DC0A21F0CF2D50CD5FEA1AD417F1098A8999
+F4163AEA50ACBF468E0863C901DC518029692C076C5BBD7954DEE6504EBB39CE
+8F680420CEE573D8338DB67A5BB2B5361734D36D029812BF3AF22AE71CC4BE7C
+8C0E047CA409DA46AA3EF4E6B345A3E1A53A9892A1943BB32ECFD340439C1D52
+14BC35A77EE696CF792BC25DE49B75F3B04F09704B64C8B1EA9FF39E6E8D9B4C
+A39ADDE4B5B49E3FBE3A7F0AC51988057E46379173D5D3AB9E786EDF308B5F0A
+5B2DA6D030F881DFA0D479D8D6D97D66F3D25ED946128B38DECFD701E607221D
+EE1069CADB078D3434253AA89970029EADFE217FF24C825718F68575379A653A
+0024F720B6355DB4C7EA81077DC68DD6DC61F85C2AE59E28FE04234E7887A9DA
+E4E9E36FB0012C49B48F057C1E98380639744B5EF0B135596964BB2F020ADF92
+812966653E399B2EF9D5044A6F8E2C788EAEF6108AEB70166157E322EB549002
+12A5FC7F4DB295C0DC64BE331D154D07E49DB9090DA8194B941117326D763EA0
+4CCC8B7F97881190EA60F9D0B33BD2DFF04BA5AC81143068D66DBA61A08D3930
+439A0A87540C2CD06F56A3D732CA041DCA2F74DFB4CD05FBD76455E389095AEB
+4CE5ED7BE40BFE6003C9D6534F19D150FF8AF8DA936D0739EBE9128BCAD016BE
+70EAC25338227E83963F81AD1466C3618B8044AFA276879B9E621F00B96B0B67
+2E8C2D95E222EA6F4586EC05BE9768957AC121965B9BBF9481EA4C513BC092F9
+A4D44F4F949E5537C1F59F74B48AFAFA371F62823286B5E005EADCC936729DAC
+4817750D66C15D3508DAEF758FDFB5C84245DF6C040EC0A91B207A1377DEEC10
+5387A82D27199E8826C00B44A5C2A4DC784B1A8288769428FD632D7AF1C3508C
+C42FC3ECAE21E060637D961D448568FBF539B8E85B7AD60F1A573995C7857AD9
+9755535F9D04B4ADD5DF7EAAAA0819A5F21F111D9D9821089D071907307025F9
+B6E4C4DCB3E7F6F06492BA6EEF4F32B38393CB787BA9E00D8F60A8B4CC91B228
+0FADC305AC966F9C2547DAE80B4F60959658AEFBFF9F63B95F106EA226978D84
+C7863BEA1C71B13A5FDAC35FE9D7037758574081CB58AF6DDE2C80E90ABC48E6
+DC0716B13DD52ECE01079EE01A114E444C1F09AA1788356432E51806D996A99A
+BF169DFBE02DF5728D88FEC214B3B272CB1A7C9B9168F302B505C54584A0B428
+17CBA6046E0319FB5041FB9319E75E7F805232DBE8312E63C639F35CD679638A
+60E1B0BAE1F1F9D359A2786AB8838694270C368D7BC92E9D65D119BF317B8909
+7BFD7AF55533BCA289460558977CFC99E3E89D0C4A3B50C17DE43E2A7D7210E0
+96F0B6BA7A4C654A8C59DF2DD5881BE5AFACB64489FEC5B129ABFB10FA17B3A7
+426E2445778B53336CE63969C5F3567DC66DEF49A7D1A6C19C84EDE1C2FDDA4D
+4FA5854F4F15C7FC1AC8175587087D068E2150D05141970845D173E5312CAC9F
+8B9CAA28EC46FBDDF610B9371BAC2F577ACFF2F7CE3634CB13941BD437390F84
+ED894384E3130E663F5C0EE25C2C8096B7BF90F7783FE1B00F6EB78D92DC41D6
+BADF384149742D6B9CCF1BA890446599FD957258E9E3041201B958C2E5BA6842
+32176AB1367690BF1AE79B6075315D538C7D6634117A20DD82FD8067F5237B5C
+C93F4989D054A45FEA482AA961738EF0B9CA8D6711DA94A512BA132038866CF6
+E59012950C870598644FC143CB205494BB65EB649FDD6157FACC5814014C5B46
+1153221D8F2D3B3FAFEB01DFF0BEAA0C00353668793379A88FD7C9827277860C
+516724161906BE5B164E
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+cleartomark
+{restore}if
+%%EndFont 
+%%BeginFont: CMMI10
+%!PS-AdobeFont-1.0: CMMI10 003.002
+%%Title: CMMI10
+%Version: 003.002
+%%CreationDate: Mon Jul 13 16:17:00 2009
+%%Creator: David M. Jones
+%Copyright: Copyright (c) 1997, 2009 American Mathematical Society
+%Copyright: (<http://www.ams.org>), with Reserved Font Name CMMI10.
+% This Font Software is licensed under the SIL Open Font License, Version 1.1.
+% This license is in the accompanying file OFL.txt, and is also
+% available with a FAQ at: http://scripts.sil.org/OFL.
+%%EndComments
+FontDirectory/CMMI10 known{/CMMI10 findfont dup/UniqueID known{dup
+/UniqueID get 5087385 eq exch/FontType get 1 eq and}{pop false}ifelse
+{save true}{false}ifelse}{false}ifelse
+11 dict begin
+/FontType 1 def
+/FontMatrix [0.001 0 0 0.001 0 0 ]readonly def
+/FontName /CMMI10 def
+/FontBBox {-32 -250 1048 750 }readonly def
+/PaintType 0 def
+/FontInfo 10 dict dup begin
+/version (003.002) readonly def
+/Notice (Copyright \050c\051 1997, 2009 American Mathematical Society \050<http://www.ams.org>\051, with Reserved Font Name CMMI10.) readonly def
+/FullName (CMMI10) readonly def
+/FamilyName (Computer Modern) readonly def
+/Weight (Medium) readonly def
+/ItalicAngle -14.04 def
+/isFixedPitch false def
+/UnderlinePosition -100 def
+/UnderlineThickness 50 def
+/ascent 750 def
+end readonly def
+/Encoding 256 array
+0 1 255 {1 index exch /.notdef put} for
+dup 58 /period put
+readonly def
+currentdict end
+currentfile eexec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+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+cleartomark
+{restore}if
+%%EndFont 
+%%BeginFont: CMMI12
+%!PS-AdobeFont-1.0: CMMI12 003.002
+%%Title: CMMI12
+%Version: 003.002
+%%CreationDate: Mon Jul 13 16:17:00 2009
+%%Creator: David M. Jones
+%Copyright: Copyright (c) 1997, 2009 American Mathematical Society
+%Copyright: (<http://www.ams.org>), with Reserved Font Name CMMI12.
+% This Font Software is licensed under the SIL Open Font License, Version 1.1.
+% This license is in the accompanying file OFL.txt, and is also
+% available with a FAQ at: http://scripts.sil.org/OFL.
+%%EndComments
+FontDirectory/CMMI12 known{/CMMI12 findfont dup/UniqueID known{dup
+/UniqueID get 5087386 eq exch/FontType get 1 eq and}{pop false}ifelse
+{save true}{false}ifelse}{false}ifelse
+11 dict begin
+/FontType 1 def
+/FontMatrix [0.001 0 0 0.001 0 0 ]readonly def
+/FontName /CMMI12 def
+/FontBBox {-31 -250 1026 750 }readonly def
+/PaintType 0 def
+/FontInfo 10 dict dup begin
+/version (003.002) readonly def
+/Notice (Copyright \050c\051 1997, 2009 American Mathematical Society \050<http://www.ams.org>\051, with Reserved Font Name CMMI12.) readonly def
+/FullName (CMMI12) readonly def
+/FamilyName (Computer Modern) readonly def
+/Weight (Medium) readonly def
+/ItalicAngle -14.04 def
+/isFixedPitch false def
+/UnderlinePosition -100 def
+/UnderlineThickness 50 def
+/ascent 750 def
+end readonly def
+/Encoding 256 array
+0 1 255 {1 index exch /.notdef put} for
+dup 58 /period put
+readonly def
+currentdict end
+currentfile eexec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+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+cleartomark
+{restore}if
+%%EndFont 
+%%BeginFont: CMSY10
+%!PS-AdobeFont-1.0: CMSY10 003.002
+%%Title: CMSY10
+%Version: 003.002
+%%CreationDate: Mon Jul 13 16:17:00 2009
+%%Creator: David M. Jones
+%Copyright: Copyright (c) 1997, 2009 American Mathematical Society
+%Copyright: (<http://www.ams.org>), with Reserved Font Name CMSY10.
+% This Font Software is licensed under the SIL Open Font License, Version 1.1.
+% This license is in the accompanying file OFL.txt, and is also
+% available with a FAQ at: http://scripts.sil.org/OFL.
+%%EndComments
+FontDirectory/CMSY10 known{/CMSY10 findfont dup/UniqueID known{dup
+/UniqueID get 5096651 eq exch/FontType get 1 eq and}{pop false}ifelse
+{save true}{false}ifelse}{false}ifelse
+11 dict begin
+/FontType 1 def
+/FontMatrix [0.001 0 0 0.001 0 0 ]readonly def
+/FontName /CMSY10 def
+/FontBBox {-29 -960 1116 775 }readonly def
+/PaintType 0 def
+/FontInfo 9 dict dup begin
+/version (003.002) readonly def
+/Notice (Copyright \050c\051 1997, 2009 American Mathematical Society \050<http://www.ams.org>\051, with Reserved Font Name CMSY10.) readonly def
+/FullName (CMSY10) readonly def
+/FamilyName (Computer Modern) readonly def
+/Weight (Medium) readonly def
+/ItalicAngle -14.04 def
+/isFixedPitch false def
+/UnderlinePosition -100 def
+/UnderlineThickness 50 def
+end readonly def
+/Encoding 256 array
+0 1 255 {1 index exch /.notdef put} for
+dup 0 /minus put
+dup 13 /circlecopyrt put
+dup 15 /bullet put
+dup 33 /arrowright put
+dup 55 /mapsto put
+readonly def
+currentdict end
+currentfile eexec
+D9D66F633B846AB284BCF8B0411B772DE5CD06DFE1BE899059C588357426D7A0
+7B684C079A47D271426064AD18CB9750D8A986D1D67C1B2AEEF8CE785CC19C81
+DE96489F740045C5E342F02DA1C9F9F3C167651E646F1A67CF379789E311EF91
+511D0F605B045B279357D6FC8537C233E7AEE6A4FDBE73E75A39EB206D20A6F6
+1021961B748D419EBEEB028B592124E174CA595C108E12725B9875544955CFFD
+028B698EF742BC8C19F979E35B8E99CADDDDC89CC6C59733F2A24BC3AF36AD86
+1319147A4A219ECB92D0D9F6228B51A97C29547000FCC8A581BE543D73F1FED4
+3D08C53693138003C01E1D216B185179E1856E2A05AA6C66AABB68B7E4409021
+91AA9D8E4C5FBBDA55F1BB6BC679EABA06BE9795DB920A6343CE934B04D75DF2
+E0C30B8FD2E475FE0D66D4AA65821864C7DD6AC9939A04094EEA832EAD33DB7A
+11EE8D595FB0E543D0E80D31D584B97879B3C7B4A85CC6358A41342D70AD0B97
+C14123421FE8A7D131FB0D03900B392FDA0ABAFC25E946D2251F150EC595E857
+D17AE424DB76B431366086F377B2A0EEFD3909E3FA35E51886FC318989C1EF20
+B6F5990F1D39C22127F0A47BC8461F3AFDF87D9BDA4B6C1D1CFD7513F1E3C3D3
+93BEF764AA832316343F9FE869A720E4AA87AE76FA87A833BBC5892DE05B867F
+10FA225E233BCFA9BB51F46A6DF22ADCEACC01C3CD1F54C9AEFA25E92EFAC00D
+7E2BA427C25483BA42A199F4D2E43DFCE79A7156F7417ACF78E41FCA91E6C9EF
+B933450D851B73A6AB6AEA7EE4C710CB5C14270D1674FA334686653793FCB31B
+491E870D3C2BC654D2C1DE463EC9BA29D7371AA1078800EF93D3F66263A2EBBB
+F5723697BF7448BD0D2E301544BECF497FD475B85DFEF52AF4F8F8BE445CABE6
+019318806D10C5952157FF8F8286C1EE701545C8F60EFA854EAE66835A2046A6
+915D395F1E0366EFE0C0391583FE001FF16D82A2E2DA5F57754A2C6F69306E36
+356ECF8EFC3F1188AD6FCD2427E0580C97A5B69B4E0E09B85EEDE142F5ADD2F0
+5DE51D6DB72B127412A0D57106C19CA493048A4F815129ABE767D51715B1515D
+9C21067CB5BC88741B7298C83EAE36A866DFA87D8981F179B1C31292F56BBB64
+3C430779468AAF07C8A8B4934E1E775FE3F35186BD1FA6EE3689C1C750678AF1
+FBF9B23195A124C5C991FE670AC0C86FD39D2B07B9A319E74EFD498B45820252
+720ECDF7294F7B0B137CEB86D33BFCEB8606985A3260FD669E461C8BE94216C5
+D434FD8854F44EE66E5A289A9F9E32BC36AF645D53F96652602BAED418C8D726
+BD04A1B4617551FE4DEF54083D414F7DCE004E6BB2DC9C2EF7CE232B254BA2C5
+7DCBD36C2072ED46FF711F121A701E2284BF1B718B3164382B8F453D68FA0377
+DFE106503B8401D4DB87F5402A3AC9A442FA060B0610A9524D530C7157C26B56
+AC970FCC1D5655FFFFA39246E6420CF97D08ADFB7B05822679BD40C638DDF0E7
+A97BFE8918B611A145AC965C203F1428812F9D340AF499B3A915B22BE798594E
+0F520109FC81E452180AE45B170FF999C5FC2761C6CECD8742A5A6FC97F16743
+AD4EFCC6572A6D3F3E4E330C5CB2FF6FEA48A5B64DD3DBE943BD9918D4A18E18
+CBCF598AEFBB6AB3CD2CBC9BFD6099272F6543F3E532E0E21E614BD2880B1023
+0AC234CB705827BF016DB84E00E8C255FDEFA0101A842929540B7B4AA8A089BD
+5EFF05B72356B6BC3727817823B5CDBB1B963103000D7F2A4E2A1472FC3E614B
+5CBCB6D6D784023173DEFEBFA8F9ED87EC1A0A9EE98CA59CFC964CF943DC683F
+E9E00DA718C4425A705A69D99988EC6F152525C790912C2E46A2381A569424AB
+54DF4798BC2D7E7A361E7991641D4B756CE2A7FF4A2848927092C59C2C4B8809
+E13AB84FB6B111E680D7FB9F2FFC2C5C66B0B501E4447C2E46C10E2F6124476F
+A140C404CFE2DC9E0199BF61E035CEB481D438139A9630934E541D261FFD2906
+4CAD99E20655FA746AFB81EDBB5601F5FD6B1D6832A01D585E2C55053F6A7378
+4DAACCAC7608DBDADAAE732D66B3E7F87E79756337C1A961E53A4651BE7C77F4
+038B89C87F650C54A2A90EB7F1D525BB353F33318551EE8D84A6A83C718EA5A4
+B2AC0F7306B1E095819B87015A90CA3ED739B09061782C28CDB36BA4BD5E5308
+5CBB70414E4112193DAC4A1FA30996327230D1E021F3CD8115E12D239D93FFDC
+B645910EB29E40D830E7BAF2DB255FD7C4E776557BB38157917D993EAC245837
+A3B515147043574157B8342D829C7228CCEA843ABC89D1785A9672A5923FC4CD
+2F3FF27E6FCACF84E2D3136CA2C0FD3EF1EE7354CD04C38B5FB874553646ED2D
+CEDF7E362EADD04B18051F20A8FB0DE18E152385B9D05F98A3A7EF177824E246
+455ABE69E2F700EB78185CCFC07E3B4C6FA301112528D977367D30D0D5D59EDE
+FAEB706DDC970A9E296236C725B2B55B09B9C336B8E23CBA5FB8692D56F33B03
+16294E5FC7FAA42E96395A57CE51CA8DDD77442F142E2E576B778373FB31C81C
+16840BB422CA827E30A81829648BDF1CA36700EA32AD888D097C1FE0A05B2D9F
+483AEE40269DF09AF0D1AD3DF80C45DDC59C2A03FBB661C79B87853737C6D352
+67626B657321B16198DBD6DB98A092F17878AE4698121E1006E53D6F9B0A3BE2
+3FB68828EF854A0CDBAA68B37ABCA6AD4A3D809AAF0BAB1697A81FE59C98C472
+1E33CD70A75A22C249DD11D76C2575ED3370A25892A16D2FD569CDA70C130770
+93F493C7D47D6F9A5424A7A542BAD726BFC3AB225DCEBBE6AC4BE006F8C7C0EA
+051424B08305BF2D951AB2986AAFEA04E078CA79B399585BFF0F1ADCED02E15B
+8765EB6BF6A8E4D0901EFF2C3AA104924EAD9637A35D877E0C51A3C37DA78CD4
+8643C8CE6DCDDE3F116A6C2390F948E5371BEB5AD2E87B41C5F01FB5C196C436
+6E256A88D082E3F46E4EFFBF605B2EFF1E9D9AD5EE4DDC323A137CD9451EDEE0
+06F7D82898D71FAF2362C0FCF1F726F97F820305B7CE20728CA08C63575083A7
+84BA28B7DE2B916432475510E274C12FFD1660A717F51DACFDF0A102D85224E0
+D6DB607BB72569ABB8A7BC6A10354CBBC01732EFE35B72062DF269CB25EA3DE6
+DC603B04C90C5912D2C38D7A5ACDCDD3F6F116D884F0D8C528F69D5D47BA20DB
+0A9E585C7D8CC3C324FE8A1DF150279F7E8FB43BDB720E624E5E9918032C02CD
+8020636AE5C38DA2484B7F4B34163E0D0A561B43B80E97746DC05C871AB620EC
+C5D47101ECED4A7E25F291184BEF8B80024AA7BB456C1B83A907652B331DEA34
+754226C39C6889EBEEFDAD081E01EF8FE47751987667836FDE4C8BB8A3FD4406
+1E643B4EA37BD370734D1A2DB17C2F4B74B4ED75098B433601F75A88C9A37A05
+CCB157EF6E32023BFA33973F3E655A4D58289136996FCFA61EEABD70791B6523
+1FF5DE71AB8A17038923118A5EED8D59C4C58D246FFA9BB26472346B40C8741F
+153D19CAFF20DD2A86C6DB89154A630FB1761929FC3F0448EE2F089C1C953E02
+905BA8DE75D101A982A611056C4B237596C10951DD98BAB838B742D3CF7DE718
+617DB72E5268583223E37E029D1C8FD3F1D21690151F76B76C52C725CA135CA2
+8666553E863CE188BFC9B99AF56AC2DB5BFEBEB12FB563D00244EB89E478657A
+98AF2E1223C1ABC25A4500E8119B86EB3C26B8A2F3505A3E5610F89B7C34E278
+53FA0A54A7F46D84A35EFEC36AE660A9E3C37EE3864106702DE5AF6C45ABF64B
+888A4A51323138CE77DB935576FE6B4824B6942DF80625098CE1B5B32B234F1D
+052A9D6039697118A9D793793775D8729D8574A2E74D7109C7B7E23BC5E2E87A
+CA8E019203952A4892544E1AD3D4EDD22971611358AB230E9A2ABDF00A288501
+A01B67C42B33F6B78C39562DB50F4663B922D9BE0D8A150311AE44B83C1F129F
+07337323E9A23211EE58E16043E127C6F9574019179F5635648A011266677B56
+B5D0201A4E1470B952A1579B57AB2329CD4C615395023C653F784D36B5EE3672
+10D191F29EA508CE84763CA4CE7C2C5229E38E241255A5CABCD6C7CBAED901A2
+CA53B5E24111921CDDF83578D33D463D70EDACA0E470D8F592303FB6BFD68B4D
+3F3BE2D7C5EC8BBF10C90111A33E205F2649B56E8443F6FAA6C721C66575AE12
+D4C40F1F46CF9E9DA675AB5D5840D938780CD9E4AD6736ECBEB6A4397613586F
+849B51048AC5F9405E03E14540A5E5582F61CDCDB57EDDF95A8C6705F433EE16
+648F098C03DED8A2AD94AE3DE202D629B9422ABB031318D48F2C85F9DBFA17BE
+84708AA3B6C9F81F4508F7A5CB7B6646AB8722ECF817877B77D473F577556DAA
+2BA0ABACFCF5DEA7498C47328E873019A956FBB250FD9D8885D21D368FA70CBD
+2709D2DA44EE7A9869963EAB48789541906DE49FAE785ECE1F18A22C7E7ED204
+9768896B78E9EB7A2BD6EEC1B26083940656ECD689D92942CC8AF05CBF82AED0
+B45A7DF4DD7AA6526FB597322560B9ED3087A65B5EEF1371C328A021411BFE3B
+D9B5088B2F1AAE381FFED52D2D1E02CD0DA78683E3B06171CBE94BE9760005D7
+135893D7CC2DB097F6AC664D9594CF1C650F84DA80D2EDE04802DBA33CE3DAFE
+EB7A37E8AEFA4FDA6252FF21E8673DD98E67124D5DBC7BACF361E57077B71939
+C1D1FB923E4E35C075CD1BCBE0E80DAEA1320D55B43EAB45D9B26C366B278782
+7519FDC482D98839BF0DF2E7C3A56A1C1A3FC0E57A75CA414F6536C1FE8EB7A0
+4ADFEE3BEDA0F53BE8CF5F64230784A797133E8CD46BCCB3BF38BCE38A73CCE2
+9E073ADE792F7128231DDD1F63E6156ADB2609C200837C2E8A2D93D2A7BC9171
+050C709A71E44E32B1B03C92EB5CF1D3BAB1C38E027DC4ED9AED633D98CD7486
+3F773ACF8AE332631CF2ABE6D606607593FE862ADE31803964E3F4DC3CE3A271
+C76BDD95C87CDB3B87BC26FC7A16D567EEC62E6FF0D471B4853DB8A94D4CACF8
+843824F818083F10E88D52FC4253E8203292CB40F1414AE7E51DD7347007C342
+CD70E8E9F2D2A13D71213B841DDEAAB208AD9EA644591C15DEB084165F9DF24B
+B91D3BBEEC2E34E38EF16A0C3F00700A7BDCBBFED2EC0D09601AD6538288DB50
+3478B051B5E16B604A0341FE621A58718D960D699D3FAD284310DCF54EB13175
+19A75A539EE98E804AEA24689D3540F0F12951A3C01FACCE9A7BAF4D0DAFA946
+FF65A4D2A4C39969607272C6886F44E90ABE27CA3A1F12A29D9B32E60E8E34F0
+17C5FE43D0E69A99A922D98909B2BBCD145E59A5E7F5426B3988F73B09A525F6
+8BD4915663C1301323180E760BE81CB874B020FDA3AE63340E4261E4F3E4949B
+CC0966BDC4426190BE9F5D77F76A72AD925662E5FE1CEF9CCAB68F0BD33DA003
+F11EB91AC4502FBD6AE48DA0F9D07C35B96B103E379B8A83A05FE728F1716194
+1F650F75BEBADB2E3810388F3E2DC7B19F1BA9E32925F2FD9F19F4E8701F3E4E
+4069125D7C401144740691E7A460021A47B1E27997FC1DDABEC5BD0EE0B20194
+2D579C7D6727AA124083242BDA46D8E116E2751C5F298851A62B60AEBE82A929
+9B9F2492BA35690D1EFD16215B8EF14E7A3803B93C28FA41D971B05B6AF3B593
+E74AD1E68A5FCE12A86E63B78BFEA87D3949FD164F12277A4688BE96356791CB
+8671C49365608F3EDECC109321AF92B4C29CAF073DA3A7D73E913D0D83FAC5EB
+BD884D4C686056404DAAAD6F82F94F803FA1FB0DD8908D1DF08FB87A8BB83027
+04DE0CBB1C6FEB6B517FBD7CF065120079E608CE41893C2BC96A347826CCDFD5
+C69E161217F2127A59F1A6F22037641613F191F22D5B4CDCBCC2EE5615623404
+ABA7BE6C5FE475481615B2AC1A2412E54688DD21E44CC9AF5F16E634AFCA389C
+4D740B7B51BB141BFAD1080E7C726C1606A28ED492E6BDE9F800EFACD1513909
+84E98CEB6A0B7A2A6F3E1D1DCC3B2552795E0932673E59ECC56DDD37A1D52BA6
+C3F0E905978AB568941A163F4CE3AAB5C5B16F86016EC47BA6F3F7AAAA77C3B6
+09C8C3ABDB6D514A76ECD37C37AA88B5860630B3406B494F7725975596F84777
+D9CF48686EC9C5DBCC1D78513F591C7C10AB9D153B3D41426B7BF668B0D04503
+56BCB686258462C1DC61095724B9F3312316262FD7C1AEC6E54DE7E5A7BD8EFF
+035299B8FD8A4A7B0F51404F4A760F4D8B4C0FB7A32FA4B2383AB6E9C78FDEDB
+FE6A5788D38A6701B123630C2A6D820A684166FBBC83DB17069494FBD411B333
+CB37E2491C5BD035A33867A6D3A3D420CC31ACF43AA07182CAAE67E40EC63663
+B678F71D4C6E0EC3A0AAF904CD3AA66E0DE5E3CDE049E94249B39A1C06E3CE9A
+F974B2484BB2CDA14282B9511E505B3C89F9C802218AE40D1A7541335C5736DD
+CD565D4B9F4CC78F3A393737EDB4FBD0DA299E21CCFEBA5478EEF013F0552A8B
+0BB11FF46CCDB784E8BDCF730A16363E66572049E42C695886EAB42A9AD9094C
+B635DF4B5B9BD9B9AE8455DFA3EEFC77653190F9A8B1E93B7281C2A21EA7DDA9
+33484745BDF7E3DD63C7AC66C286C9A5A698A5E4D7A91710B7FF943FB23609B6
+4B442F83CB795788FAB5E9CF3F75D5487DA26170E4561C7941C910B088C3B86D
+F844B0F340CF82786A3FCF347048463EBD2006281A816627065DDA6CD4D3AC5E
+2024BC96C7D896381BBB567951E7A1F29D4E95351298B000D29E5F3D0448CB5A
+CFDAE1BADE9403B90371C3A07D208948AFA022A69C519434B6813086ADF518D5
+88E0B92072A44BA1B3EBB630A13B7AB90992E85B6D67361C8D96F3E0D826FF37
+17B67E4B1EB7BADFD98D7F4FD17BECE740ADF13C141EBF0A91CB105DABB32FE0
+55086D56A0D358841D15FD349E6B95512E4EDF4C430216FF85C2ABE995E4B40A
+A6044CC8820AD885C07E052B3F91C2E9A1D163BFFD210F7BE95B923E2500DB50
+2075106DB541C267BD450B25B670CE80BCD068D4DBFF2D82634175B61FBD3BC3
+406131F44C7D6F18D375D1F2270829DDF29DC14DBB58A30AC193245D18DE91F8
+AB88AB548D8138605BB5A50073295534E314366E26665AE70482B890E4101D6B
+60E4F3B37ABCA1346DAAE8FDB8DD9C832EFF3E73BA470E2BACE7B8515CB43388
+C27AF99FF9322175CF8D4947E6B3846AFF5163E972156847F58A66660EC8A3A6
+5FB47C9F637B4CBB4C73B6A080B0CF6FD1E9665E92032540570FFCC747C67C50
+822811AADC404BC7ECD1673E8AA6C3A2F1D82F39430B58C29145E2F1B679C46E
+94EDC711883F1E4EA84117A54757E8895A40401A26E1437B39A2F65CAADD6E02
+D71FA8AF7453668DC613F326A3344F74AD7AC67569AF399385500ABDA5EDD3BA
+343CC5EDD4B558467626850E752B9959FEF1454E53E7A3DCBC2255AD8F6AB4FE
+894455118A61C58840CB68A925ACCAD75CEACE863D806916228F0614191A1CD5
+DC9BAE256018615AA3725834519449B0A88B4F396654E74099C007930ADB1327
+DD119BF799FE3B0B223E1EDA04FE2DA7A1C879143E1C33B6C6344F4BA033AD6F
+8E88C33DEF1977796B454BAB2494C930F492A518E8198C708A75FFEF8C49C324
+A718AB59B889DED521229E741FFE53F98EBE88B0405AD523254FD3FA4BBE96DA
+DA1C27C1C979A0DD4E61C3B1F4C4DE01E42F1C4435EECFC02D97994BC8AF5270
+E7CB1458D76ED0229C5FFB4A23B8716018F9050970895D51722CDE8F2EA3D947
+DFF374D84915D5C5D16463A6FFCD079D1ED416C4347BF831FF0C4ADFB61295DC
+4D5785BB0852BF472CFC97EC174491CAF961AB90629F055E75DAA6D9898E8653
+5BCF379816CAE46FEA62E7BE8E9B953466E51828172C4DBD0E1BBAD1CE28B5B1
+02B3E36403BE80B49A47446A6677FCED438F01D60EB10F478C89528FA337D0D8
+88D3FC123C076507ACDAF783A9A6E24ED73BF24B6E0F11C13E532DE5F70B15A0
+657F5ED27D204449A841ED19E01432CFFE928E921321113780D036D34F2797DE
+D4459CFD15BB117B5C9745EF3CD2B296D91FAD48C80B136D94476967E255F808
+AD2B5D522ADEC64176833756510391815A1D4A8DA1D0AEE7CAD36A1D161889F2
+3347D5B6BC503300FDDD48F594F391D5FB42C42113C538E707C16EE24A3F375E
+7C506E8F49CE50FF9DEF3B4A4C1BEB3848EAA3477349833BA22D2A9012287D8B
+A8C4CB4307A1188ACC0E6E9338E1559BE5FAFF381BD82A6C71C267409468B3C0
+2C1A29F4281D565836EAE57F680490FEA4A952FF64C8CD11C377C294DCD1EC25
+CEFB2B6DCE959D0208F85B6E32E9B44FD455F9B134A5306D95EA29F37BB8B86D
+9E592159338E1293F449380E13C21AE42E6D6952083BFD432F72DFB7B6F9257F
+5784C683A6E9ACD72334E0EA8060A81E14EE32300055040E24B49810DFA1468D
+A962DE1D1AEE09B49109257898F155A63A83D514996DCD2F96BC0F52796267DD
+DA6229F5E9024F78B02154C27EFDB9B6E09B131C9E9E4DB41A0FAEDD93A05512
+A919AC8869C09FC929682B51174D816B85DADE28C00F6391429BA98327848AA8
+C52FEFEBB2296BB78F06BC1950A8E0405EDBA2D8C51F1F607E73F5A2173E5469
+BEB7918844D450B652DCFBC4C0D0C4AC2AD678B7165AA8F053B717C1D417ECF2
+3A2909E864E503059135C05EA8F7CF185DA45CE17FA40B4076ABDD8B167B6F02
+3C8962F09CE07257495ECE5357F755C48E49F4385DB5CE4FBACA3AD4D18E39B8
+F7057F4BF581ED26ADAEE218CE130B0CCCA0C7B273E51D7F314F53EC8EC84100
+8292750A37A4D4551A5C2A65D2382DB0941409D83FE1005752BAD1980307F153
+BD7C92FC12AEBC7C04839FD7F01BC85F0880DB22FE524204FB924445B6B3DF6E
+1B657353086539BF4E60909524FFC4CCFBC8E0139F65F53ACF3EEC572C673CD0
+64AB1C29253049B26888A322E0FFCF7DF8871F701CAF5BE7B509E090C43B4755
+B100C929D5A8A4B9646E8EB39F2E705006AD23EEC58E0E1CD0C18A346D8ED66B
+D0D2E215F637D25EC4F05C449FF8E25250211635C9D5121EE0D51E712B7A8699
+19E96ED8451ECBE97A7197337C65CCB44FA2522EF6735BFB60CD053EFAC10381
+C70053C2DB3B6DB8DAD720DA6DA25069131FD9759EC2182D1B649AE67FE4181D
+B223BA15F5FEB0BBA498F9993F6A9C8DB9088DFACF064ECCB56FC4951EC8F9
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+cleartomark
+{restore}if
+%%EndFont 
+%%BeginFont: CMSL10
+%!PS-AdobeFont-1.0: CMSL10 003.002
+%%Title: CMSL10
+%Version: 003.002
+%%CreationDate: Mon Jul 13 16:17:00 2009
+%%Creator: David M. Jones
+%Copyright: Copyright (c) 1997, 2009 American Mathematical Society
+%Copyright: (<http://www.ams.org>), with Reserved Font Name CMSL10.
+% This Font Software is licensed under the SIL Open Font License, Version 1.1.
+% This license is in the accompanying file OFL.txt, and is also
+% available with a FAQ at: http://scripts.sil.org/OFL.
+%%EndComments
+FontDirectory/CMSL10 known{/CMSL10 findfont dup/UniqueID known{dup
+/UniqueID get 5000798 eq exch/FontType get 1 eq and}{pop false}ifelse
+{save true}{false}ifelse}{false}ifelse
+11 dict begin
+/FontType 1 def
+/FontMatrix [0.001 0 0 0.001 0 0 ]readonly def
+/FontName /CMSL10 def
+/FontBBox {-62 -250 1123 750 }readonly def
+/PaintType 0 def
+/FontInfo 9 dict dup begin
+/version (003.002) readonly def
+/Notice (Copyright \050c\051 1997, 2009 American Mathematical Society \050<http://www.ams.org>\051, with Reserved Font Name CMSL10.) readonly def
+/FullName (CMSL10) readonly def
+/FamilyName (Computer Modern) readonly def
+/Weight (Medium) readonly def
+/ItalicAngle -9.46 def
+/isFixedPitch false def
+/UnderlinePosition -100 def
+/UnderlineThickness 50 def
+end readonly def
+/Encoding 256 array
+0 1 255 {1 index exch /.notdef put} for
+dup 11 /ff put
+dup 12 /fi put
+dup 14 /ffi put
+dup 33 /exclam put
+dup 36 /dollar put
+dup 45 /hyphen put
+dup 49 /one put
+dup 50 /two put
+dup 51 /three put
+dup 65 /A put
+dup 66 /B put
+dup 67 /C put
+dup 68 /D put
+dup 69 /E put
+dup 70 /F put
+dup 71 /G put
+dup 72 /H put
+dup 73 /I put
+dup 75 /K put
+dup 76 /L put
+dup 77 /M put
+dup 78 /N put
+dup 79 /O put
+dup 80 /P put
+dup 82 /R put
+dup 83 /S put
+dup 84 /T put
+dup 85 /U put
+dup 87 /W put
+dup 88 /X put
+dup 89 /Y put
+dup 97 /a put
+dup 98 /b put
+dup 99 /c put
+dup 100 /d put
+dup 101 /e put
+dup 102 /f put
+dup 103 /g put
+dup 104 /h put
+dup 105 /i put
+dup 106 /j put
+dup 107 /k put
+dup 108 /l put
+dup 109 /m put
+dup 110 /n put
+dup 111 /o put
+dup 112 /p put
+dup 113 /q put
+dup 114 /r put
+dup 115 /s put
+dup 116 /t put
+dup 117 /u put
+dup 118 /v put
+dup 119 /w put
+dup 120 /x put
+dup 121 /y put
+dup 122 /z put
+readonly def
+currentdict end
+currentfile eexec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+{restore}if
+%%EndFont 
+%%BeginFont: CMTT10
+%!PS-AdobeFont-1.0: CMTT10 003.002
+%%Title: CMTT10
+%Version: 003.002
+%%CreationDate: Mon Jul 13 16:17:00 2009
+%%Creator: David M. Jones
+%Copyright: Copyright (c) 1997, 2009 American Mathematical Society
+%Copyright: (<http://www.ams.org>), with Reserved Font Name CMTT10.
+% This Font Software is licensed under the SIL Open Font License, Version 1.1.
+% This license is in the accompanying file OFL.txt, and is also
+% available with a FAQ at: http://scripts.sil.org/OFL.
+%%EndComments
+FontDirectory/CMTT10 known{/CMTT10 findfont dup/UniqueID known{dup
+/UniqueID get 5000832 eq exch/FontType get 1 eq and}{pop false}ifelse
+{save true}{false}ifelse}{false}ifelse
+11 dict begin
+/FontType 1 def
+/FontMatrix [0.001 0 0 0.001 0 0 ]readonly def
+/FontName /CMTT10 def
+/FontBBox {-4 -233 537 696 }readonly def
+/PaintType 0 def
+/FontInfo 9 dict dup begin
+/version (003.002) readonly def
+/Notice (Copyright \050c\051 1997, 2009 American Mathematical Society \050<http://www.ams.org>\051, with Reserved Font Name CMTT10.) readonly def
+/FullName (CMTT10) readonly def
+/FamilyName (Computer Modern) readonly def
+/Weight (Medium) readonly def
+/ItalicAngle 0 def
+/isFixedPitch true def
+/UnderlinePosition -100 def
+/UnderlineThickness 50 def
+end readonly def
+/Encoding 256 array
+0 1 255 {1 index exch /.notdef put} for
+dup 33 /exclam put
+dup 34 /quotedbl put
+dup 35 /numbersign put
+dup 36 /dollar put
+dup 37 /percent put
+dup 38 /ampersand put
+dup 39 /quoteright put
+dup 40 /parenleft put
+dup 41 /parenright put
+dup 42 /asterisk put
+dup 43 /plus put
+dup 44 /comma put
+dup 45 /hyphen put
+dup 46 /period put
+dup 47 /slash put
+dup 48 /zero put
+dup 49 /one put
+dup 50 /two put
+dup 51 /three put
+dup 52 /four put
+dup 53 /five put
+dup 54 /six put
+dup 55 /seven put
+dup 56 /eight put
+dup 57 /nine put
+dup 58 /colon put
+dup 59 /semicolon put
+dup 60 /less put
+dup 61 /equal put
+dup 62 /greater put
+dup 63 /question put
+dup 64 /at put
+dup 65 /A put
+dup 66 /B put
+dup 67 /C put
+dup 68 /D put
+dup 69 /E put
+dup 70 /F put
+dup 71 /G put
+dup 72 /H put
+dup 73 /I put
+dup 75 /K put
+dup 76 /L put
+dup 77 /M put
+dup 78 /N put
+dup 79 /O put
+dup 80 /P put
+dup 81 /Q put
+dup 82 /R put
+dup 83 /S put
+dup 84 /T put
+dup 85 /U put
+dup 86 /V put
+dup 87 /W put
+dup 88 /X put
+dup 89 /Y put
+dup 90 /Z put
+dup 91 /bracketleft put
+dup 92 /backslash put
+dup 93 /bracketright put
+dup 94 /asciicircum put
+dup 95 /underscore put
+dup 96 /quoteleft put
+dup 97 /a put
+dup 98 /b put
+dup 99 /c put
+dup 100 /d put
+dup 101 /e put
+dup 102 /f put
+dup 103 /g put
+dup 104 /h put
+dup 105 /i put
+dup 106 /j put
+dup 107 /k put
+dup 108 /l put
+dup 109 /m put
+dup 110 /n put
+dup 111 /o put
+dup 112 /p put
+dup 113 /q put
+dup 114 /r put
+dup 115 /s put
+dup 116 /t put
+dup 117 /u put
+dup 118 /v put
+dup 119 /w put
+dup 120 /x put
+dup 121 /y put
+dup 122 /z put
+dup 123 /braceleft put
+dup 124 /bar put
+dup 125 /braceright put
+dup 126 /asciitilde put
+readonly def
+currentdict end
+currentfile eexec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+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+0000000000000000000000000000000000000000000000000000000000000000
+cleartomark
+{restore}if
+%%EndFont 
+TeXDict begin 40258431 52099146 1000 600 600 (bashref.dvi)
+@start /Fa 130[55 1[55 123[{ T1Encoding ReEncodeFont }2
+116.231 /SFRM1440 rf /Fb 133[34 41 41 55 41 43 30 30
+30 41 43 38 43 64 21 41 23 21 43 38 23 34 43 34 43 38
+8[58 4[43 57 1[52 60 58 70 48 2[28 58 3[59 55 54 58 7[38
+38 38 38 38 38 38 38 38 38 3[21 31[43 12[{}52 74.7198
+/CMR9 rf /Fc 197[21 58[{}1 74.7198 /CMMI9 rf /Fd 134[39
+39 2[39 39 39 39 2[39 39 39 39 2[39 39 1[39 39 39 2[39
+19[39 27[39 39 2[39 45[{}20 74.7198 /CMSLTT10 rf /Fe
+129[39 39 1[39 39 39 39 39 39 39 39 39 39 39 39 39 39
+39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 1[39
+39 39 39 39 39 39 39 39 39 1[39 39 39 39 39 39 1[39 39
+39 39 39 39 39 39 39 39 39 39 1[39 39 39 5[39 39 39 39
+39 39 39 39 39 1[39 39 39 39 39 1[39 39 1[39 33[{}81
+74.7198 /CMTT9 rf /Ff 167[62 3[60 46 2[57 1[62 76 52
+1[43 1[62 65 54 1[63 60 67[{}13 83.022 /CMR10 rf /Fg
+135[67 2[67 1[50 2[61 69 5[33 1[70 2[68 52[60 47[{}9
+109.174 /CMCSC10 rf /Fh 140[56 3[56 56 1[56 2[56 56 56
+57[56 45[{}8 109.091 /CMTT12 rf /Fi 130[45 1[45 123[{
+ T1Encoding ReEncodeFont }2 91.3242 /SFRM1095 rf /Fj
+134[48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48
+48 48 48 48 48 48 48 48 1[48 2[48 3[48 3[48 1[48 1[48
+1[48 48 48 1[48 48 48 1[48 48 48 48 1[48 6[48 6[48 48
+48 48 2[48 5[48 39[{}49 90.9091 /CMSLTT10 rf /Fk 134[65
+65 89 65 68 48 48 50 65 68 61 68 102 34 65 1[34 68 61
+37 56 68 55 68 60 7[93 1[127 1[94 85 68 92 92 84 92 96
+116 74 96 1[46 96 96 77 81 94 89 87 93 1[58 5[61 61 61
+61 61 61 61 61 61 61 1[34 41 34 31[68 72 11[{}62 109.091
+/CMBX12 rf /Fl 135[42 1[42 1[30 37 38 1[46 46 51 74 23
+42 1[28 1[42 1[42 46 42 1[46 51[33 32[51 12[{}19 90.9091
+/CMTI10 rf /Fm 135[56 2[56 1[42 55 1[51 58 56 68 47 2[27
+1[58 49 51 57 54 53 56 46[50 2[50 1[34 45[{}20 90.9091
+/CMCSC10 rf /Fn 197[25 58[{}1 90.9091 /CMMI10 rf /Fo
+197[33 58[{}1 119.552 /CMMI12 rf /Fp 134[85 85 1[85 90
+63 64 66 1[90 81 90 134 45 1[49 45 90 81 49 74 90 72
+90 78 10[122 124 112 90 120 3[126 153 97 1[83 60 126
+127 101 106 124 117 115 122 7[81 81 81 81 81 81 81 81
+81 81 35[90 94 11[{}52 143.462 /CMBX12 rf /Fq 200[0 21[91
+17[45 1[91 12[71{}5 90.9091 /CMSY10 rf /Fr 133[40 48
+48 66 48 51 35 36 36 48 51 45 51 76 25 48 28 25 51 45
+28 40 51 40 51 45 7[68 68 93 1[68 66 51 67 1[62 71 68
+83 57 71 1[33 68 71 59 62 69 66 64 68 13[45 45 45 3[30
+8[45 2[25 18[76 1[51 53 11[{}57 90.9091 /CMSL10 rf /Fs
+132[67 1[71 71 97 71 75 52 53 55 1[75 67 75 112 37 71
+41 37 75 67 41 61 75 60 75 65 3[37 1[37 1[102 102 139
+102 103 94 75 100 101 92 101 105 128 81 105 69 50 105
+106 85 88 103 97 96 102 105 64 4[37 67 67 67 67 67 67
+67 67 67 67 1[37 1[37 1[67 5[67 112 1[41 20[75 78 11[{}73
+119.552 /CMBX12 rf /Ft 129[48 48 48 48 48 48 48 48 48
+48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48
+48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48
+48 48 48 48 48 48 48 1[48 48 48 48 48 48 48 48 48 48
+48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48
+48 48 48 48 48 48 48 48 48 48 48 48 48 33[{}93 90.9091
+/CMTT10 rf /Fu 131[91 45 40 48 48 66 48 51 35 36 36 48
+51 45 51 76 25 48 28 25 51 45 28 40 51 40 51 45 25 2[25
+45 25 56 68 68 93 68 68 66 51 67 71 62 71 68 83 57 71
+47 33 68 71 59 62 69 66 64 68 71 43 1[71 1[25 25 45 45
+45 45 45 45 45 45 45 45 45 25 30 25 1[45 35 35 25 71
+76 45 76 45 25 18[76 51 51 53 11[{}91 90.9091 /CMR10
+rf /Fv 138[108 1[76 79 3[108 1[54 3[108 1[59 88 1[86
+1[94 14[144 4[184 10[138 66[{}13 172.154 /CMBX12 rf end
+%%EndProlog
+%%BeginSetup
+%%Feature: *Resolution 600dpi
+TeXDict begin
+%%BeginPaperSize: Letter
+/setpagedevice where
+{ pop << /PageSize [612 792] >> setpagedevice }
+{ /letter where { pop letter } if }
+ifelse
+%%EndPaperSize
+ end
+%%EndSetup
+%%Page: 1 1
+TeXDict begin 1 0 bop 150 1318 a Fv(Bash)64 b(Reference)j(Man)-5
+b(ual)p 150 1385 3600 34 v 2361 1481 a Fu(Reference)31
+b(Do)s(cumen)m(tation)i(for)d(Bash)2428 1589 y(Edition)h(5.1,)g(for)f
+Ft(Bash)g Fu(V)-8 b(ersion)31 b(5.1.)3217 1697 y(Octob)s(er)f(2020)150
+4927 y Fs(Chet)45 b(Ramey)-11 b(,)46 b(Case)g(W)-11 b(estern)46
+b(Reserv)l(e)g(Univ)l(ersit)l(y)150 5068 y(Brian)f(F)-11
+b(o)l(x,)45 b(F)-11 b(ree)45 b(Soft)l(w)l(are)h(F)-11
+b(oundation)p 150 5141 3600 17 v eop end
+%%Page: 2 2
+TeXDict begin 2 1 bop 150 4279 a Fu(This)35 b(text)h(is)g(a)g(brief)f
+(description)h(of)f(the)h(features)g(that)g(are)g(presen)m(t)g(in)f
+(the)h(Bash)f(shell)h(\(v)m(ersion)150 4389 y(5.1,)c(29)f(Octob)s(er)f
+(2020\).)150 4523 y(This)35 b(is)g(Edition)h(5.1,)i(last)f(up)s(dated)d
+(29)i(Octob)s(er)g(2020,)j(of)c Fr(The)h(GNU)g(Bash)f(Reference)i(Man)m
+(ual)p Fu(,)150 4633 y(for)30 b Ft(Bash)p Fu(,)g(V)-8
+b(ersion)31 b(5.1.)150 4767 y(Cop)m(yrigh)m(t)602 4764
+y(c)577 4767 y Fq(\015)f Fu(1988{2020)35 b(F)-8 b(ree)31
+b(Soft)m(w)m(are)h(F)-8 b(oundation,)31 b(Inc.)390 4902
+y(P)m(ermission)21 b(is)f(gran)m(ted)h(to)g(cop)m(y)-8
+b(,)24 b(distribute)c(and/or)h(mo)s(dify)e(this)i(do)s(cumen)m(t)f
+(under)f(the)390 5011 y(terms)25 b(of)h(the)f(GNU)h(F)-8
+b(ree)27 b(Do)s(cumen)m(tation)g(License,)g(V)-8 b(ersion)26
+b(1.3)g(or)f(an)m(y)h(later)g(v)m(ersion)390 5121 y(published)43
+b(b)m(y)h(the)h(F)-8 b(ree)46 b(Soft)m(w)m(are)g(F)-8
+b(oundation;)53 b(with)44 b(no)g(In)m(v)-5 b(arian)m(t)46
+b(Sections,)j(no)390 5230 y(F)-8 b(ron)m(t-Co)m(v)m(er)31
+b(T)-8 b(exts,)30 b(and)f(no)f(Bac)m(k-Co)m(v)m(er)k(T)-8
+b(exts.)41 b(A)29 b(cop)m(y)h(of)f(the)g(license)h(is)f(included)390
+5340 y(in)h(the)h(section)g(en)m(titled)h(\\GNU)f(F)-8
+b(ree)32 b(Do)s(cumen)m(tation)g(License".)p eop end
+%%Page: -1 3
+TeXDict begin -1 2 bop 3725 -116 a Fu(i)150 299 y Fp(T)-13
+b(able)53 b(of)h(Con)l(ten)l(ts)150 649 y Fs(1)135 b(In)l(tro)t
+(duction)31 b Fo(:)19 b(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f
+(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)
+f(:)h(:)f(:)h(:)f(:)g(:)44 b Fs(1)275 786 y Fu(1.1)92
+b(What)31 b(is)f(Bash?)10 b Fn(:)15 b(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h
+(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)
+h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h
+(:)f(:)h(:)f(:)g(:)h(:)23 b Fu(1)275 896 y(1.2)92 b(What)31
+b(is)f(a)h(shell?)22 b Fn(:)15 b(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)
+f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f
+(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)
+g(:)h(:)35 b Fu(1)150 1147 y Fs(2)135 b(De\014nitions)31
+b Fo(:)20 b(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f
+(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)
+f(:)h(:)f(:)g(:)h(:)43 b Fs(3)150 1425 y(3)135 b(Basic)45
+b(Shell)g(F)-11 b(eatures)19 b Fo(:)h(:)g(:)f(:)g(:)h(:)f(:)h(:)f(:)h
+(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)
+h(:)f(:)32 b Fs(5)275 1562 y Fu(3.1)92 b(Shell)30 b(Syn)m(tax)13
+b Fn(:)j(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)
+g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f
+(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)
+27 b Fu(5)399 1671 y(3.1.1)93 b(Shell)30 b(Op)s(eration)14
+b Fn(:)h(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)
+h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h
+(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)28 b Fu(5)399
+1781 y(3.1.2)93 b(Quoting)23 b Fn(:)16 b(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)
+h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h
+(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)
+f(:)g(:)h(:)f(:)h(:)f(:)g(:)37 b Fu(6)524 1890 y(3.1.2.1)93
+b(Escap)s(e)30 b(Character)19 b Fn(:)d(:)g(:)f(:)h(:)f(:)g(:)h(:)f(:)h
+(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)
+h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)33 b Fu(6)524
+2000 y(3.1.2.2)93 b(Single)31 b(Quotes)16 b Fn(:)g(:)f(:)g(:)h(:)f(:)h
+(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)
+h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)30
+b Fu(6)524 2110 y(3.1.2.3)93 b(Double)31 b(Quotes)14
+b Fn(:)i(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)
+g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f
+(:)h(:)f(:)g(:)h(:)f(:)28 b Fu(6)524 2219 y(3.1.2.4)93
+b(ANSI-C)30 b(Quoting)15 b Fn(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g
+(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)
+h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)29 b Fu(6)524
+2329 y(3.1.2.5)93 b(Lo)s(cale-Sp)s(eci\014c)32 b(T)-8
+b(ranslation)17 b Fn(:)e(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)
+f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)30
+b Fu(7)399 2438 y(3.1.3)93 b(Commen)m(ts)14 b Fn(:)i(:)f(:)g(:)h(:)f(:)
+h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g
+(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)
+h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)28 b Fu(7)275 2548 y(3.2)92
+b(Shell)30 b(Commands)9 b Fn(:)15 b(:)g(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f
+(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)
+g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g
+(:)h(:)f(:)23 b Fu(8)399 2658 y(3.2.1)93 b(Reserv)m(ed)31
+b(W)-8 b(ords)27 b Fn(:)15 b(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)
+h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g
+(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)40
+b Fu(8)399 2767 y(3.2.2)93 b(Simple)30 b(Commands)15
+b Fn(:)f(:)i(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)
+f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h
+(:)f(:)h(:)f(:)g(:)h(:)f(:)29 b Fu(8)399 2877 y(3.2.3)93
+b(Pip)s(elines)26 b Fn(:)15 b(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f
+(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)
+g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f
+(:)h(:)f(:)g(:)40 b Fu(8)399 2986 y(3.2.4)93 b(Lists)30
+b(of)h(Commands)23 b Fn(:)14 b(:)i(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f
+(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)
+g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)36 b Fu(9)399
+3096 y(3.2.5)93 b(Comp)s(ound)28 b(Commands)9 b Fn(:)14
+b(:)i(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f
+(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)
+22 b Fu(10)524 3205 y(3.2.5.1)93 b(Lo)s(oping)30 b(Constructs)16
+b Fn(:)g(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)
+f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)29
+b Fu(10)524 3315 y(3.2.5.2)93 b(Conditional)31 b(Constructs)25
+b Fn(:)16 b(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f
+(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)39
+b Fu(11)524 3425 y(3.2.5.3)93 b(Grouping)30 b(Commands)22
+b Fn(:)16 b(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h
+(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)36
+b Fu(15)399 3534 y(3.2.6)93 b(Copro)s(cesses)26 b Fn(:)15
+b(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f
+(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)
+g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)39 b Fu(15)399
+3644 y(3.2.7)93 b(GNU)31 b(P)m(arallel)13 b Fn(:)k(:)f(:)f(:)h(:)f(:)h
+(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)
+h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h
+(:)f(:)g(:)h(:)26 b Fu(16)275 3753 y(3.3)92 b(Shell)30
+b(F)-8 b(unctions)16 b Fn(:)g(:)g(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f
+(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)
+g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g
+(:)h(:)29 b Fu(18)275 3863 y(3.4)92 b(Shell)30 b(P)m(arameters)c
+Fn(:)15 b(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g
+(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)
+h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)38 b
+Fu(20)399 3973 y(3.4.1)93 b(P)m(ositional)32 b(P)m(arameters)8
+b Fn(:)17 b(:)f(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h
+(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)
+h(:)f(:)h(:)21 b Fu(21)399 4082 y(3.4.2)93 b(Sp)s(ecial)30
+b(P)m(arameters)c Fn(:)16 b(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f
+(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)
+g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)37 b Fu(21)275 4192
+y(3.5)92 b(Shell)30 b(Expansions)24 b Fn(:)15 b(:)h(:)f(:)h(:)f(:)g(:)h
+(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)
+f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f
+(:)g(:)h(:)f(:)38 b Fu(22)399 4301 y(3.5.1)93 b(Brace)31
+b(Expansion)9 b Fn(:)15 b(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g
+(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)
+h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)22 b
+Fu(23)399 4411 y(3.5.2)93 b(Tilde)30 b(Expansion)18 b
+Fn(:)d(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f
+(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)
+f(:)h(:)f(:)g(:)h(:)f(:)h(:)31 b Fu(24)399 4521 y(3.5.3)93
+b(Shell)30 b(P)m(arameter)i(Expansion)26 b Fn(:)15 b(:)g(:)h(:)f(:)h(:)
+f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h
+(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)39 b Fu(25)399 4630 y(3.5.4)93
+b(Command)29 b(Substitution)20 b Fn(:)15 b(:)h(:)f(:)h(:)f(:)g(:)h(:)f
+(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)
+g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)33 b Fu(31)399 4740
+y(3.5.5)93 b(Arithmetic)31 b(Expansion)c Fn(:)15 b(:)h(:)f(:)g(:)h(:)f
+(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)
+g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)40 b
+Fu(31)399 4849 y(3.5.6)93 b(Pro)s(cess)30 b(Substitution)15
+b Fn(:)g(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)
+h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h
+(:)f(:)g(:)h(:)28 b Fu(32)399 4959 y(3.5.7)93 b(W)-8
+b(ord)31 b(Splitting)d Fn(:)15 b(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)
+g(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g
+(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)41
+b Fu(32)399 5068 y(3.5.8)93 b(Filename)32 b(Expansion)22
+b Fn(:)14 b(:)h(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f
+(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)
+f(:)h(:)f(:)g(:)35 b Fu(33)524 5178 y(3.5.8.1)93 b(P)m(attern)31
+b(Matc)m(hing)14 b Fn(:)k(:)d(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g
+(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)
+h(:)f(:)g(:)h(:)f(:)h(:)27 b Fu(33)399 5288 y(3.5.9)93
+b(Quote)31 b(Remo)m(v)-5 b(al)17 b Fn(:)g(:)e(:)h(:)f(:)h(:)f(:)g(:)h
+(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)
+f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)30
+b Fu(35)p eop end
+%%Page: -2 4
+TeXDict begin -2 3 bop 3699 -116 a Fu(ii)275 83 y(3.6)92
+b(Redirections)14 b Fn(:)i(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f
+(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)
+f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f
+(:)h(:)f(:)g(:)27 b Fu(35)399 193 y(3.6.1)93 b(Redirecting)31
+b(Input)11 b Fn(:)j(:)i(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h
+(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)
+h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)24 b Fu(36)399 302
+y(3.6.2)93 b(Redirecting)31 b(Output)15 b Fn(:)f(:)i(:)f(:)h(:)f(:)g(:)
+h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h
+(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)28
+b Fu(36)399 412 y(3.6.3)93 b(App)s(ending)28 b(Redirected)k(Output)20
+b Fn(:)14 b(:)h(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h
+(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)33 b Fu(36)399
+521 y(3.6.4)93 b(Redirecting)31 b(Standard)e(Output)h(and)f(Standard)h
+(Error)16 b Fn(:)e(:)i(:)f(:)g(:)h(:)f(:)h(:)f(:)29 b
+Fu(37)399 631 y(3.6.5)93 b(App)s(ending)28 b(Standard)i(Output)f(and)h
+(Standard)f(Error)d Fn(:)15 b(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)40
+b Fu(37)399 741 y(3.6.6)93 b(Here)31 b(Do)s(cumen)m(ts)15
+b Fn(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)
+h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h
+(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)27 b Fu(37)399 850 y(3.6.7)93
+b(Here)31 b(Strings)16 b Fn(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f
+(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)
+f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)29
+b Fu(38)399 960 y(3.6.8)93 b(Duplicating)32 b(File)f(Descriptors)25
+b Fn(:)15 b(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h
+(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)37
+b Fu(38)399 1069 y(3.6.9)93 b(Mo)m(ving)32 b(File)f(Descriptors)d
+Fn(:)16 b(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h
+(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)
+40 b Fu(38)399 1179 y(3.6.10)93 b(Op)s(ening)29 b(File)j(Descriptors)f
+(for)f(Reading)h(and)f(W)-8 b(riting)29 b Fn(:)15 b(:)h(:)f(:)g(:)h(:)f
+(:)41 b Fu(38)275 1289 y(3.7)92 b(Executing)31 b(Commands)24
+b Fn(:)15 b(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f
+(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)
+g(:)h(:)f(:)h(:)f(:)g(:)h(:)38 b Fu(39)399 1398 y(3.7.1)93
+b(Simple)30 b(Command)f(Expansion)11 b Fn(:)k(:)g(:)h(:)f(:)g(:)h(:)f
+(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)
+h(:)f(:)g(:)h(:)f(:)24 b Fu(39)399 1508 y(3.7.2)93 b(Command)29
+b(Searc)m(h)i(and)f(Execution)15 b Fn(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g
+(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)
+28 b Fu(39)399 1617 y(3.7.3)93 b(Command)29 b(Execution)i(En)m
+(vironmen)m(t)17 b Fn(:)e(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f
+(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)30 b Fu(40)399
+1727 y(3.7.4)93 b(En)m(vironmen)m(t)26 b Fn(:)16 b(:)f(:)g(:)h(:)f(:)h
+(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)
+h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h
+(:)f(:)g(:)h(:)39 b Fu(41)399 1836 y(3.7.5)93 b(Exit)31
+b(Status)16 b Fn(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)
+f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f
+(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)29
+b Fu(41)399 1946 y(3.7.6)93 b(Signals)23 b Fn(:)15 b(:)h(:)f(:)h(:)f(:)
+g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f
+(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)
+h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)36 b Fu(42)275
+2056 y(3.8)92 b(Shell)30 b(Scripts)12 b Fn(:)i(:)i(:)f(:)h(:)f(:)h(:)f
+(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)
+f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f
+(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)25 b Fu(42)150 2306
+y Fs(4)135 b(Shell)45 b(Builtin)g(Commands)14 b Fo(:)20
+b(:)f(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)h(:)f(:)g
+(:)h(:)f(:)h(:)f(:)27 b Fs(44)275 2443 y Fu(4.1)92 b(Bourne)30
+b(Shell)g(Builtins)16 b Fn(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g
+(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)
+h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)29
+b Fu(44)275 2553 y(4.2)92 b(Bash)30 b(Builtin)h(Commands)13
+b Fn(:)h(:)i(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)
+h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h
+(:)f(:)g(:)h(:)f(:)26 b Fu(51)275 2663 y(4.3)92 b(Mo)s(difying)30
+b(Shell)g(Beha)m(vior)18 b Fn(:)f(:)e(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g
+(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)
+h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)31 b Fu(62)399
+2772 y(4.3.1)93 b(The)30 b(Set)g(Builtin)14 b Fn(:)i(:)f(:)h(:)f(:)g(:)
+h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h
+(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)
+f(:)g(:)27 b Fu(62)399 2882 y(4.3.2)93 b(The)30 b(Shopt)f(Builtin)21
+b Fn(:)16 b(:)g(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h
+(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)
+h(:)f(:)h(:)f(:)g(:)h(:)34 b Fu(66)275 2991 y(4.4)92
+b(Sp)s(ecial)30 b(Builtins)9 b Fn(:)16 b(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)
+f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h
+(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)
+f(:)g(:)h(:)f(:)22 b Fu(72)150 3242 y Fs(5)135 b(Shell)45
+b(V)-11 b(ariables)11 b Fo(:)20 b(:)g(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f
+(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)
+f(:)h(:)f(:)g(:)h(:)f(:)24 b Fs(73)275 3379 y Fu(5.1)92
+b(Bourne)30 b(Shell)g(V)-8 b(ariables)10 b Fn(:)17 b(:)e(:)g(:)h(:)f(:)
+h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g
+(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)
+23 b Fu(73)275 3489 y(5.2)92 b(Bash)30 b(V)-8 b(ariables)26
+b Fn(:)16 b(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h
+(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)
+f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)38
+b Fu(73)150 3739 y Fs(6)135 b(Bash)44 b(F)-11 b(eatures)32
+b Fo(:)19 b(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h
+(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)
+44 b Fs(86)275 3876 y Fu(6.1)92 b(In)m(v)m(oking)31 b(Bash)16
+b Fn(:)g(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)
+f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f
+(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)29
+b Fu(86)275 3986 y(6.2)92 b(Bash)30 b(Startup)g(Files)f
+Fn(:)15 b(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f
+(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)
+g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)41 b Fu(88)275
+4095 y(6.3)92 b(In)m(teractiv)m(e)32 b(Shells)19 b Fn(:)d(:)f(:)h(:)f
+(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)
+g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f
+(:)h(:)f(:)g(:)h(:)f(:)h(:)32 b Fu(89)399 4205 y(6.3.1)93
+b(What)31 b(is)f(an)h(In)m(teractiv)m(e)h(Shell?)25 b
+Fn(:)16 b(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f
+(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)38
+b Fu(90)399 4315 y(6.3.2)93 b(Is)30 b(this)g(Shell)g(In)m(teractiv)m
+(e?)22 b Fn(:)d(:)c(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f
+(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)
+h(:)35 b Fu(90)399 4424 y(6.3.3)93 b(In)m(teractiv)m(e)33
+b(Shell)d(Beha)m(vior)11 b Fn(:)17 b(:)e(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)
+f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f
+(:)h(:)f(:)g(:)h(:)f(:)24 b Fu(90)275 4534 y(6.4)92 b(Bash)30
+b(Conditional)h(Expressions)10 b Fn(:)k(:)i(:)f(:)h(:)f(:)g(:)h(:)f(:)h
+(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)
+h(:)f(:)h(:)f(:)g(:)h(:)f(:)23 b Fu(91)275 4643 y(6.5)92
+b(Shell)30 b(Arithmetic)13 b Fn(:)k(:)e(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f
+(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)
+g(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g
+(:)h(:)26 b Fu(93)275 4753 y(6.6)92 b(Aliases)20 b Fn(:)d(:)e(:)h(:)f
+(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)
+f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f
+(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)33
+b Fu(94)275 4863 y(6.7)92 b(Arra)m(ys)25 b Fn(:)16 b(:)f(:)h(:)f(:)g(:)
+h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h
+(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)
+h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)38
+b Fu(95)275 4972 y(6.8)92 b(The)29 b(Directory)j(Stac)m(k)16
+b Fn(:)h(:)f(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)
+h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h
+(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)29 b Fu(97)399 5082
+y(6.8.1)93 b(Directory)32 b(Stac)m(k)f(Builtins)23 b
+Fn(:)16 b(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h
+(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)
+36 b Fu(97)275 5191 y(6.9)92 b(Con)m(trolling)31 b(the)g(Prompt)13
+b Fn(:)h(:)i(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)
+h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h
+(:)f(:)g(:)h(:)f(:)h(:)25 b Fu(98)275 5301 y(6.10)92
+b(The)30 b(Restricted)h(Shell)9 b Fn(:)15 b(:)h(:)f(:)g(:)h(:)f(:)h(:)f
+(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)
+g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)22
+b Fu(100)p eop end
+%%Page: -3 5
+TeXDict begin -3 4 bop 3674 -116 a Fu(iii)275 83 y(6.11)92
+b(Bash)31 b(POSIX)e(Mo)s(de)14 b Fn(:)i(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f
+(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)
+h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)28
+b Fu(101)275 193 y(6.12)92 b(Shell)30 b(Compatibilit)m(y)i(Mo)s(de)25
+b Fn(:)15 b(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h
+(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)
+h(:)38 b Fu(104)150 443 y Fs(7)135 b(Job)45 b(Con)l(trol)35
+b Fo(:)20 b(:)f(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)h
+(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)
+g(:)48 b Fs(107)275 580 y Fu(7.1)92 b(Job)30 b(Con)m(trol)h(Basics)23
+b Fn(:)16 b(:)g(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f
+(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)
+g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)36 b Fu(107)275 690
+y(7.2)92 b(Job)30 b(Con)m(trol)h(Builtins)11 b Fn(:)k(:)g(:)h(:)f(:)h
+(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)
+h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h
+(:)f(:)24 b Fu(108)275 800 y(7.3)92 b(Job)30 b(Con)m(trol)h(V)-8
+b(ariables)26 b Fn(:)15 b(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h
+(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)
+f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)38 b Fu(110)150
+1050 y Fs(8)135 b(Command)45 b(Line)g(Editing)11 b Fo(:)20
+b(:)g(:)f(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)h(:)f
+(:)g(:)h(:)f(:)h(:)k Fs(111)275 1187 y Fu(8.1)92 b(In)m(tro)s(duction)
+30 b(to)h(Line)f(Editing)12 b Fn(:)k(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)
+f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f
+(:)h(:)f(:)g(:)h(:)f(:)h(:)25 b Fu(111)275 1297 y(8.2)92
+b(Readline)31 b(In)m(teraction)14 b Fn(:)j(:)e(:)g(:)h(:)f(:)h(:)f(:)g
+(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)
+h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)27
+b Fu(111)399 1406 y(8.2.1)93 b(Readline)31 b(Bare)g(Essen)m(tials)13
+b Fn(:)j(:)g(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)
+h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)26
+b Fu(112)399 1516 y(8.2.2)93 b(Readline)31 b(Mo)m(v)m(emen)m(t)i
+(Commands)13 b Fn(:)i(:)g(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g
+(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)27
+b Fu(112)399 1626 y(8.2.3)93 b(Readline)31 b(Killing)g(Commands)24
+b Fn(:)15 b(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f
+(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)38
+b Fu(113)399 1735 y(8.2.4)93 b(Readline)31 b(Argumen)m(ts)17
+b Fn(:)e(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)
+h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h
+(:)f(:)h(:)30 b Fu(113)399 1845 y(8.2.5)93 b(Searc)m(hing)31
+b(for)f(Commands)f(in)h(the)h(History)15 b Fn(:)g(:)h(:)f(:)h(:)f(:)h
+(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)28 b Fu(113)275
+1954 y(8.3)92 b(Readline)31 b(Init)f(File)8 b Fn(:)17
+b(:)e(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h
+(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)
+f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)22 b Fu(114)399 2064
+y(8.3.1)93 b(Readline)31 b(Init)f(File)i(Syn)m(tax)21
+b Fn(:)15 b(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f
+(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)34
+b Fu(114)399 2174 y(8.3.2)93 b(Conditional)31 b(Init)f(Constructs)14
+b Fn(:)h(:)g(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)
+f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)27
+b Fu(122)399 2283 y(8.3.3)93 b(Sample)30 b(Init)g(File)20
+b Fn(:)d(:)e(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)
+g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f
+(:)h(:)f(:)g(:)h(:)f(:)h(:)33 b Fu(124)275 2393 y(8.4)92
+b(Bindable)30 b(Readline)h(Commands)19 b Fn(:)c(:)g(:)h(:)f(:)h(:)f(:)g
+(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)
+h(:)f(:)h(:)f(:)g(:)h(:)f(:)33 b Fu(127)399 2502 y(8.4.1)93
+b(Commands)29 b(F)-8 b(or)31 b(Mo)m(ving)16 b Fn(:)h(:)e(:)h(:)f(:)g(:)
+h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h
+(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)29 b Fu(127)399
+2612 y(8.4.2)93 b(Commands)29 b(F)-8 b(or)31 b(Manipulating)g(The)f
+(History)c Fn(:)16 b(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)
+f(:)39 b Fu(128)399 2721 y(8.4.3)93 b(Commands)29 b(F)-8
+b(or)31 b(Changing)f(T)-8 b(ext)9 b Fn(:)17 b(:)e(:)h(:)f(:)h(:)f(:)g
+(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)
+h(:)f(:)23 b Fu(130)399 2831 y(8.4.4)93 b(Killing)31
+b(And)e(Y)-8 b(anking)10 b Fn(:)17 b(:)e(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)
+h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g
+(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)24 b Fu(131)399
+2941 y(8.4.5)93 b(Sp)s(ecifying)30 b(Numeric)g(Argumen)m(ts)25
+b Fn(:)16 b(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h
+(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)39 b Fu(132)399
+3050 y(8.4.6)93 b(Letting)31 b(Readline)g(T)m(yp)s(e)f(F)-8
+b(or)31 b(Y)-8 b(ou)20 b Fn(:)c(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f
+(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)33
+b Fu(133)399 3160 y(8.4.7)93 b(Keyb)s(oard)29 b(Macros)9
+b Fn(:)17 b(:)e(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h
+(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)
+h(:)f(:)h(:)f(:)g(:)h(:)22 b Fu(134)399 3269 y(8.4.8)93
+b(Some)30 b(Miscellaneous)j(Commands)14 b Fn(:)f(:)j(:)f(:)h(:)f(:)g(:)
+h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h
+(:)f(:)27 b Fu(135)275 3379 y(8.5)92 b(Readline)31 b(vi)f(Mo)s(de)e
+Fn(:)16 b(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h
+(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)
+f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)41 b Fu(137)275
+3489 y(8.6)92 b(Programmable)30 b(Completion)25 b Fn(:)15
+b(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f
+(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)37
+b Fu(137)275 3598 y(8.7)92 b(Programmable)30 b(Completion)h(Builtins)14
+b Fn(:)i(:)g(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)
+h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)28 b Fu(139)275
+3708 y(8.8)92 b(A)30 b(Programmable)h(Completion)g(Example)8
+b Fn(:)16 b(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h
+(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)22 b Fu(143)150 3958 y
+Fs(9)135 b(Using)45 b(History)h(In)l(teractiv)l(ely)28
+b Fo(:)22 b(:)d(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g
+(:)h(:)41 b Fs(146)275 4095 y Fu(9.1)92 b(Bash)30 b(History)h(F)-8
+b(acilities)9 b Fn(:)19 b(:)c(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f
+(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)
+f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)22 b Fu(146)275
+4205 y(9.2)92 b(Bash)30 b(History)h(Builtins)d Fn(:)16
+b(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g
+(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)
+h(:)f(:)h(:)f(:)41 b Fu(146)275 4315 y(9.3)92 b(History)31
+b(Expansion)10 b Fn(:)k(:)h(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h
+(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)
+f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)23
+b Fu(148)399 4424 y(9.3.1)93 b(Ev)m(en)m(t)31 b(Designators)19
+b Fn(:)e(:)e(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)
+g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f
+(:)h(:)f(:)g(:)h(:)32 b Fu(149)399 4534 y(9.3.2)93 b(W)-8
+b(ord)31 b(Designators)c Fn(:)15 b(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h
+(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)
+f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)39 b Fu(150)399
+4643 y(9.3.3)93 b(Mo)s(di\014ers)15 b Fn(:)g(:)g(:)h(:)f(:)g(:)h(:)f(:)
+h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h
+(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)
+h(:)f(:)h(:)f(:)g(:)29 b Fu(150)p eop end
+%%Page: -4 6
+TeXDict begin -4 5 bop 3677 -116 a Fu(iv)150 83 y Fs(10)135
+b(Installing)46 b(Bash)16 b Fo(:)j(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f
+(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)
+f(:)h(:)f(:)29 b Fs(152)275 220 y Fu(10.1)92 b(Basic)32
+b(Installation)8 b Fn(:)17 b(:)f(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)
+h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g
+(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)22
+b Fu(152)275 330 y(10.2)92 b(Compilers)30 b(and)g(Options)17
+b Fn(:)d(:)i(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)
+f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h
+(:)f(:)h(:)f(:)30 b Fu(153)275 439 y(10.3)92 b(Compiling)30
+b(F)-8 b(or)32 b(Multiple)f(Arc)m(hitectures)10 b Fn(:)16
+b(:)f(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f
+(:)g(:)h(:)f(:)h(:)f(:)23 b Fu(153)275 549 y(10.4)92
+b(Installation)32 b(Names)22 b Fn(:)16 b(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)
+f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h
+(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)35
+b Fu(153)275 658 y(10.5)92 b(Sp)s(ecifying)30 b(the)g(System)h(T)m(yp)s
+(e)21 b Fn(:)14 b(:)i(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h
+(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)
+h(:)34 b Fu(154)275 768 y(10.6)92 b(Sharing)30 b(Defaults)24
+b Fn(:)16 b(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f
+(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)
+f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)37 b Fu(154)275
+878 y(10.7)92 b(Op)s(eration)30 b(Con)m(trols)12 b Fn(:)k(:)f(:)h(:)f
+(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)
+f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f
+(:)h(:)f(:)25 b Fu(154)275 987 y(10.8)92 b(Optional)31
+b(F)-8 b(eatures)19 b Fn(:)d(:)g(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)
+h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h
+(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)32
+b Fu(155)150 1238 y Fs(App)t(endix)44 b(A)119 b(Rep)t(orting)46
+b(Bugs)21 b Fo(:)f(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)h
+(:)f(:)g(:)h(:)f(:)35 b Fs(160)150 1498 y(App)t(endix)44
+b(B)125 b(Ma)7 b(jor)46 b(Di\013erences)g(F)-11 b(rom)284
+1639 y(The)45 b(Bourne)f(Shell)35 b Fo(:)19 b(:)h(:)f(:)h(:)f(:)h(:)f
+(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)h(:)
+f(:)g(:)h(:)f(:)h(:)47 b Fs(161)275 1776 y Fu(B.1)92
+b(Implemen)m(tation)31 b(Di\013erences)h(F)-8 b(rom)31
+b(The)e(SVR4.2)j(Shell)22 b Fn(:)15 b(:)g(:)g(:)h(:)f(:)h(:)f(:)g(:)h
+(:)35 b Fu(165)150 2027 y Fs(App)t(endix)44 b(C)124 b(GNU)36
+b(F)-11 b(ree)35 b(Do)t(cumen)l(tation)i(License)25 b
+Fo(:)20 b(:)29 b Fs(167)150 2305 y(App)t(endix)44 b(D)118
+b(Indexes)27 b Fo(:)20 b(:)g(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)
+h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)40
+b Fs(175)275 2442 y Fu(D.1)92 b(Index)29 b(of)i(Shell)f(Builtin)h
+(Commands)23 b Fn(:)16 b(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)
+g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)38
+b Fu(175)275 2552 y(D.2)92 b(Index)29 b(of)i(Shell)f(Reserv)m(ed)h(W)-8
+b(ords)20 b Fn(:)c(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)h(:)f
+(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)34
+b Fu(176)275 2661 y(D.3)92 b(P)m(arameter)31 b(and)f(V)-8
+b(ariable)32 b(Index)27 b Fn(:)16 b(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g
+(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)
+h(:)f(:)g(:)42 b Fu(177)275 2771 y(D.4)92 b(F)-8 b(unction)31
+b(Index)24 b Fn(:)15 b(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h
+(:)f(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)
+f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)38
+b Fu(179)275 2880 y(D.5)92 b(Concept)30 b(Index)15 b
+Fn(:)g(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h
+(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)
+h(:)f(:)h(:)f(:)g(:)h(:)f(:)h(:)f(:)g(:)h(:)f(:)29 b
+Fu(181)p eop end
+%%Page: 1 7
+TeXDict begin 1 6 bop 3705 -116 a Fu(1)150 299 y Fp(1)80
+b(In)l(tro)t(duction)150 604 y Fs(1.1)68 b(What)45 b(is)g(Bash?)150
+763 y Fu(Bash)38 b(is)g(the)g(shell,)i(or)d(command)h(language)h(in)m
+(terpreter,)h(for)e(the)g Fm(gnu)f Fu(op)s(erating)h(system.)63
+b(The)150 873 y(name)33 b(is)g(an)g(acron)m(ym)g(for)g(the)g(`)p
+Ft(Bourne-Again)27 b(SHell)p Fu(',)32 b(a)i(pun)d(on)i(Stephen)f
+(Bourne,)h(the)g(author)150 983 y(of)f(the)f(direct)h(ancestor)h(of)e
+(the)h(curren)m(t)f(Unix)g(shell)h Ft(sh)p Fu(,)f(whic)m(h)g(app)s
+(eared)g(in)g(the)h(Sev)m(en)m(th)g(Edition)150 1092
+y(Bell)g(Labs)e(Researc)m(h)h(v)m(ersion)g(of)f(Unix.)275
+1221 y(Bash)f(is)g(largely)i(compatible)f(with)f Ft(sh)g
+Fu(and)g(incorp)s(orates)g(useful)g(features)g(from)g(the)g(Korn)g
+(shell)150 1330 y Ft(ksh)37 b Fu(and)h(the)g(C)g(shell)g
+Ft(csh)p Fu(.)64 b(It)38 b(is)g(in)m(tended)g(to)h(b)s(e)f(a)g
+(conforman)m(t)h(implemen)m(tation)h(of)e(the)g Fm(ieee)150
+1440 y(posix)c Fu(Shell)g(and)g(T)-8 b(o)s(ols)35 b(p)s(ortion)f(of)g
+(the)h Fm(ieee)f(posix)f Fu(sp)s(eci\014cation)j(\()p
+Fm(ieee)e Fu(Standard)f(1003.1\).)56 b(It)150 1550 y(o\013ers)31
+b(functional)f(impro)m(v)m(emen)m(ts)i(o)m(v)m(er)g Ft(sh)d
+Fu(for)i(b)s(oth)e(in)m(teractiv)m(e)k(and)d(programming)g(use.)275
+1678 y(While)h(the)g Fm(gnu)f Fu(op)s(erating)h(system)g(pro)m(vides)f
+(other)h(shells,)g(including)f(a)h(v)m(ersion)g(of)g
+Ft(csh)p Fu(,)f(Bash)150 1788 y(is)j(the)h(default)f(shell.)49
+b(Lik)m(e)34 b(other)g Fm(gnu)f Fu(soft)m(w)m(are,)i(Bash)f(is)f(quite)
+h(p)s(ortable.)49 b(It)33 b(curren)m(tly)g(runs)f(on)150
+1897 y(nearly)c(ev)m(ery)g(v)m(ersion)g(of)f(Unix)h(and)e(a)i(few)f
+(other)h(op)s(erating)g(systems)f Fq(\000)g Fu(indep)s(enden)m
+(tly-supp)s(orted)150 2007 y(p)s(orts)j(exist)h(for)f
+Fm(ms-dos)p Fu(,)f Fm(os/2)p Fu(,)i(and)f(Windo)m(ws)g(platforms.)150
+2236 y Fs(1.2)68 b(What)45 b(is)g(a)h(shell?)150 2395
+y Fu(A)m(t)32 b(its)f(base,)h(a)f(shell)g(is)h(simply)e(a)h(macro)h
+(pro)s(cessor)f(that)g(executes)i(commands.)42 b(The)30
+b(term)h(macro)150 2505 y(pro)s(cessor)25 b(means)g(functionalit)m(y)i
+(where)d(text)j(and)d(sym)m(b)s(ols)h(are)h(expanded)e(to)i(create)h
+(larger)f(expres-)150 2615 y(sions.)275 2743 y(A)34 b(Unix)h(shell)g
+(is)f(b)s(oth)g(a)h(command)g(in)m(terpreter)g(and)f(a)h(programming)f
+(language.)55 b(As)35 b(a)g(com-)150 2853 y(mand)30 b(in)m(terpreter,)i
+(the)g(shell)f(pro)m(vides)g(the)h(user)e(in)m(terface)j(to)f(the)f
+(ric)m(h)h(set)g(of)f Fm(gnu)g Fu(utilities.)44 b(The)150
+2962 y(programming)30 b(language)h(features)f(allo)m(w)h(these)g
+(utilities)g(to)g(b)s(e)e(com)m(bined.)41 b(Files)31
+b(con)m(taining)g(com-)150 3072 y(mands)e(can)i(b)s(e)e(created,)j(and)
+d(b)s(ecome)i(commands)f(themselv)m(es.)42 b(These)30
+b(new)f(commands)h(ha)m(v)m(e)i(the)150 3182 y(same)j(status)g(as)g
+(system)g(commands)f(in)g(directories)i(suc)m(h)e(as)h
+Ft(/bin)p Fu(,)g(allo)m(wing)h(users)e(or)g(groups)g(to)150
+3291 y(establish)d(custom)f(en)m(vironmen)m(ts)h(to)g(automate)h(their)
+f(common)f(tasks.)275 3420 y(Shells)j(ma)m(y)h(b)s(e)f(used)g(in)m
+(teractiv)m(ely)k(or)d(non-in)m(teractiv)m(ely)-8 b(.)54
+b(In)33 b(in)m(teractiv)m(e)j(mo)s(de,)f(they)e(accept)150
+3529 y(input)21 b(t)m(yp)s(ed)h(from)g(the)h(k)m(eyb)s(oard.)37
+b(When)22 b(executing)i(non-in)m(teractiv)m(ely)-8 b(,)27
+b(shells)c(execute)g(commands)150 3639 y(read)30 b(from)g(a)h(\014le.)
+275 3768 y(A)41 b(shell)g(allo)m(ws)h(execution)h(of)e
+Fm(gnu)g Fu(commands,)i(b)s(oth)e(sync)m(hronously)f(and)h(async)m
+(hronously)-8 b(.)150 3877 y(The)29 b(shell)g(w)m(aits)i(for)e(sync)m
+(hronous)f(commands)h(to)h(complete)h(b)s(efore)e(accepting)i(more)e
+(input;)g(asyn-)150 3987 y(c)m(hronous)22 b(commands)h(con)m(tin)m(ue)h
+(to)f(execute)h(in)e(parallel)i(with)f(the)f(shell)h(while)g(it)g
+(reads)g(and)f(executes)150 4096 y(additional)35 b(commands.)50
+b(The)33 b Fr(redirection)h Fu(constructs)g(p)s(ermit)f(\014ne-grained)
+g(con)m(trol)i(of)f(the)g(input)150 4206 y(and)40 b(output)f(of)i
+(those)f(commands.)70 b(Moreo)m(v)m(er,)45 b(the)c(shell)f(allo)m(ws)h
+(con)m(trol)h(o)m(v)m(er)g(the)e(con)m(ten)m(ts)i(of)150
+4316 y(commands')30 b(en)m(vironmen)m(ts.)275 4444 y(Shells)k(also)i
+(pro)m(vide)g(a)f(small)h(set)f(of)g(built-in)g(commands)g(\()p
+Fr(builtins)t Fu(\))g(implemen)m(ting)h(function-)150
+4554 y(alit)m(y)i(imp)s(ossible)e(or)g(incon)m(v)m(enien)m(t)j(to)e
+(obtain)g(via)g(separate)g(utilities.)61 b(F)-8 b(or)37
+b(example,)i Ft(cd)p Fu(,)e Ft(break)p Fu(,)150 4663
+y Ft(continue)p Fu(,)28 b(and)i Ft(exec)f Fu(cannot)i(b)s(e)f(implemen)
+m(ted)h(outside)g(of)f(the)h(shell)f(b)s(ecause)h(they)f(directly)h
+(ma-)150 4773 y(nipulate)d(the)g(shell)g(itself.)41 b(The)27
+b Ft(history)p Fu(,)g Ft(getopts)p Fu(,)f Ft(kill)p Fu(,)i(or)g
+Ft(pwd)f Fu(builtins,)h(among)g(others,)h(could)150 4883
+y(b)s(e)34 b(implemen)m(ted)g(in)g(separate)h(utilities,)i(but)d(they)g
+(are)g(more)h(con)m(v)m(enien)m(t)h(to)f(use)f(as)g(builtin)g(com-)150
+4992 y(mands.)40 b(All)31 b(of)f(the)h(shell)f(builtins)g(are)h
+(describ)s(ed)e(in)h(subsequen)m(t)g(sections.)275 5121
+y(While)39 b(executing)h(commands)e(is)g(essen)m(tial,)43
+b(most)c(of)g(the)g(p)s(o)m(w)m(er)f(\(and)g(complexit)m(y\))j(of)e
+(shells)150 5230 y(is)34 b(due)f(to)i(their)f(em)m(b)s(edded)f
+(programming)h(languages.)52 b(Lik)m(e)35 b(an)m(y)f(high-lev)m(el)i
+(language,)h(the)d(shell)150 5340 y(pro)m(vides)c(v)-5
+b(ariables,)32 b(\015o)m(w)e(con)m(trol)i(constructs,)f(quoting,)g(and)
+f(functions.)p eop end
+%%Page: 2 8
+TeXDict begin 2 7 bop 150 -116 a Fu(Chapter)30 b(1:)41
+b(In)m(tro)s(duction)2592 b(2)275 299 y(Shells)21 b(o\013er)i(features)
+f(geared)h(sp)s(eci\014cally)g(for)f(in)m(teractiv)m(e)j(use)d(rather)g
+(than)g(to)h(augmen)m(t)g(the)f(pro-)150 408 y(gramming)32
+b(language.)48 b(These)32 b(in)m(teractiv)m(e)j(features)d(include)g
+(job)g(con)m(trol,)j(command)c(line)i(editing,)150 518
+y(command)d(history)g(and)g(aliases.)42 b(Eac)m(h)31
+b(of)g(these)g(features)f(is)h(describ)s(ed)e(in)h(this)g(man)m(ual.)p
+eop end
+%%Page: 3 9
+TeXDict begin 3 8 bop 3705 -116 a Fu(3)150 299 y Fp(2)80
+b(De\014nitions)150 552 y Fu(These)30 b(de\014nitions)g(are)h(used)e
+(throughout)h(the)h(remainder)f(of)g(this)h(man)m(ual.)150
+720 y Ft(POSIX)240 b Fu(A)27 b(family)g(of)g(op)s(en)f(system)g
+(standards)g(based)g(on)h(Unix.)39 b(Bash)27 b(is)g(primarily)f
+(concerned)630 830 y(with)k(the)h(Shell)f(and)g(Utilities)i(p)s(ortion)
+e(of)h(the)f Fm(posix)g Fu(1003.1)j(standard.)150 995
+y Ft(blank)240 b Fu(A)30 b(space)h(or)g(tab)f(c)m(haracter.)150
+1161 y Ft(builtin)144 b Fu(A)35 b(command)g(that)g(is)g(implemen)m(ted)
+g(in)m(ternally)h(b)m(y)f(the)g(shell)g(itself,)i(rather)d(than)h(b)m
+(y)630 1271 y(an)30 b(executable)i(program)e(somewhere)h(in)f(the)g
+(\014le)h(system.)150 1436 y Ft(control)d(operator)630
+1546 y Fu(A)20 b Ft(token)f Fu(that)i(p)s(erforms)e(a)i(con)m(trol)g
+(function.)37 b(It)21 b(is)f(a)h Ft(newline)d Fu(or)j(one)f(of)h(the)f
+(follo)m(wing:)630 1655 y(`)p Ft(||)p Fu(',)31 b(`)p
+Ft(&&)p Fu(',)f(`)p Ft(&)p Fu(',)h(`)p Ft(;)p Fu(',)g(`)p
+Ft(;;)p Fu(',)f(`)p Ft(;&)p Fu(',)h(`)p Ft(;;&)p Fu(',)f(`)p
+Ft(|)p Fu(',)h(`)p Ft(|&)p Fu(',)f(`)p Ft(\()p Fu(',)h(or)f(`)p
+Ft(\))p Fu('.)150 1821 y Ft(exit)f(status)630 1931 y
+Fu(The)f(v)-5 b(alue)29 b(returned)e(b)m(y)h(a)h(command)f(to)h(its)g
+(caller.)41 b(The)28 b(v)-5 b(alue)29 b(is)f(restricted)h(to)h(eigh)m
+(t)630 2040 y(bits,)h(so)f(the)h(maxim)m(um)f(v)-5 b(alue)31
+b(is)f(255.)150 2206 y Ft(field)240 b Fu(A)27 b(unit)g(of)g(text)h
+(that)g(is)f(the)g(result)g(of)g(one)h(of)f(the)g(shell)g(expansions.)
+40 b(After)27 b(expansion,)630 2315 y(when)e(executing)h(a)g(command,)h
+(the)f(resulting)f(\014elds)g(are)h(used)f(as)h(the)g(command)f(name)
+630 2425 y(and)30 b(argumen)m(ts.)150 2591 y Ft(filename)96
+b Fu(A)30 b(string)h(of)f(c)m(haracters)i(used)e(to)h(iden)m(tify)g(a)f
+(\014le.)150 2756 y Ft(job)336 b Fu(A)31 b(set)h(of)f(pro)s(cesses)g
+(comprising)g(a)g(pip)s(eline,)g(and)g(an)m(y)g(pro)s(cesses)g
+(descended)g(from)f(it,)630 2866 y(that)h(are)g(all)g(in)f(the)h(same)f
+(pro)s(cess)g(group.)150 3031 y Ft(job)f(control)630
+3141 y Fu(A)22 b(mec)m(hanism)g(b)m(y)f(whic)m(h)h(users)f(can)h
+(selectiv)m(ely)i(stop)e(\(susp)s(end\))e(and)h(restart)i(\(resume\))
+630 3251 y(execution)32 b(of)e(pro)s(cesses.)150 3416
+y Ft(metacharacter)630 3526 y Fu(A)23 b(c)m(haracter)h(that,)h(when)d
+(unquoted,)h(separates)h(w)m(ords.)37 b(A)23 b(metac)m(haracter)i(is)e
+(a)g Ft(space)p Fu(,)630 3635 y Ft(tab)p Fu(,)29 b Ft(newline)p
+Fu(,)e(or)i(one)h(of)f(the)h(follo)m(wing)g(c)m(haracters:)42
+b(`)p Ft(|)p Fu(',)29 b(`)p Ft(&)p Fu(',)h(`)p Ft(;)p
+Fu(',)g(`)p Ft(\()p Fu(',)g(`)p Ft(\))p Fu(',)g(`)p Ft(<)p
+Fu(',)f(or)h(`)p Ft(>)p Fu('.)150 3801 y Ft(name)288
+b Fu(A)37 b Ft(word)f Fu(consisting)i(solely)h(of)e(letters,)j(n)m(um)m
+(b)s(ers,)e(and)f(underscores,)h(and)f(b)s(eginning)630
+3910 y(with)23 b(a)g(letter)h(or)f(underscore.)38 b Ft(Name)p
+Fu(s)22 b(are)h(used)f(as)i(shell)f(v)-5 b(ariable)24
+b(and)e(function)h(names.)630 4020 y(Also)31 b(referred)f(to)h(as)f(an)
+h Ft(identifier)p Fu(.)150 4186 y Ft(operator)96 b Fu(A)38
+b Ft(control)28 b(operator)36 b Fu(or)h(a)i Ft(redirection)27
+b(operator)p Fu(.)61 b(See)38 b(Section)g(3.6)h([Redirec-)630
+4295 y(tions],)f(page)f(35,)i(for)d(a)g(list)h(of)f(redirection)h(op)s
+(erators.)58 b(Op)s(erators)35 b(con)m(tain)j(at)f(least)630
+4405 y(one)31 b(unquoted)e Ft(metacharacter)p Fu(.)150
+4570 y Ft(process)f(group)630 4680 y Fu(A)i(collection)k(of)c(related)h
+(pro)s(cesses)g(eac)m(h)g(ha)m(ving)g(the)g(same)f(pro)s(cess)g(group)g
+Fm(id)p Fu(.)150 4846 y Ft(process)e(group)h(ID)630 4955
+y Fu(A)h(unique)g(iden)m(ti\014er)h(that)f(represen)m(ts)h(a)g
+Ft(process)d(group)h Fu(during)g(its)i(lifetime.)150
+5121 y Ft(reserved)d(word)630 5230 y Fu(A)h Ft(word)e
+Fu(that)i(has)f(a)h(sp)s(ecial)g(meaning)f(to)h(the)g(shell.)40
+b(Most)30 b(reserv)m(ed)e(w)m(ords)g(in)m(tro)s(duce)630
+5340 y(shell)j(\015o)m(w)f(con)m(trol)i(constructs,)f(suc)m(h)f(as)g
+Ft(for)g Fu(and)g Ft(while)p Fu(.)p eop end
+%%Page: 4 10
+TeXDict begin 4 9 bop 150 -116 a Fu(Chapter)30 b(2:)41
+b(De\014nitions)2662 b(4)150 299 y Ft(return)29 b(status)630
+408 y Fu(A)h(synon)m(ym)g(for)g Ft(exit)g(status)p Fu(.)150
+568 y Ft(signal)192 b Fu(A)40 b(mec)m(hanism)h(b)m(y)e(whic)m(h)h(a)h
+(pro)s(cess)e(ma)m(y)i(b)s(e)e(noti\014ed)h(b)m(y)g(the)h(k)m(ernel)f
+(of)g(an)g(ev)m(en)m(t)630 677 y(o)s(ccurring)30 b(in)g(the)h(system.)
+150 837 y Ft(special)d(builtin)630 946 y Fu(A)j(shell)f(builtin)g
+(command)h(that)g(has)f(b)s(een)g(classi\014ed)h(as)g(sp)s(ecial)g(b)m
+(y)f(the)h Fm(posix)f Fu(stan-)630 1056 y(dard.)150 1215
+y Ft(token)240 b Fu(A)38 b(sequence)h(of)f(c)m(haracters)h(considered)f
+(a)h(single)g(unit)e(b)m(y)h(the)h(shell.)64 b(It)38
+b(is)g(either)h(a)630 1325 y Ft(word)29 b Fu(or)i(an)f
+Ft(operator)p Fu(.)150 1484 y Ft(word)288 b Fu(A)28 b(sequence)g(of)g
+(c)m(haracters)h(treated)g(as)f(a)g(unit)f(b)m(y)h(the)g(shell.)40
+b(W)-8 b(ords)28 b(ma)m(y)g(not)g(include)630 1594 y(unquoted)i
+Ft(metacharacters)p Fu(.)p eop end
+%%Page: 5 11
+TeXDict begin 5 10 bop 3705 -116 a Fu(5)150 299 y Fp(3)80
+b(Basic)54 b(Shell)e(F)-13 b(eatures)150 601 y Fu(Bash)21
+b(is)g(an)f(acron)m(ym)i(for)e(`)p Ft(Bourne-Again)27
+b(SHell)p Fu('.)37 b(The)20 b(Bourne)g(shell)h(is)g(the)g(traditional)h
+(Unix)f(shell)150 710 y(originally)h(written)f(b)m(y)f(Stephen)g
+(Bourne.)38 b(All)21 b(of)g(the)g(Bourne)f(shell)h(builtin)f(commands)g
+(are)i(a)m(v)-5 b(ailable)150 820 y(in)26 b(Bash,)h(The)f(rules)f(for)h
+(ev)-5 b(aluation)28 b(and)d(quoting)h(are)h(tak)m(en)g(from)f(the)g
+Fm(posix)f Fu(sp)s(eci\014cation)i(for)f(the)150 929
+y(`standard')k(Unix)g(shell.)275 1086 y(This)h(c)m(hapter)i(brie\015y)e
+(summarizes)h(the)h(shell's)f(`building)g(blo)s(c)m(ks':)45
+b(commands,)32 b(con)m(trol)i(struc-)150 1196 y(tures,)k(shell)e
+(functions,)h(shell)g Fl(p)-5 b(ar)g(ameters)p Fu(,)41
+b(shell)36 b(expansions,)i Fl(r)-5 b(e)g(dir)g(e)g(ctions)p
+Fu(,)40 b(whic)m(h)c(are)h(a)f(w)m(a)m(y)h(to)150 1306
+y(direct)31 b(input)e(and)h(output)g(from)g(and)g(to)h(named)f
+(\014les,)g(and)g(ho)m(w)g(the)h(shell)g(executes)g(commands.)150
+1580 y Fs(3.1)68 b(Shell)45 b(Syn)l(tax)150 1740 y Fu(When)40
+b(the)h(shell)g(reads)f(input,)i(it)f(pro)s(ceeds)f(through)g(a)h
+(sequence)g(of)g(op)s(erations.)71 b(If)40 b(the)h(input)150
+1849 y(indicates)31 b(the)f(b)s(eginning)f(of)h(a)g(commen)m(t,)h(the)f
+(shell)g(ignores)g(the)g(commen)m(t)h(sym)m(b)s(ol)f(\(`)p
+Ft(#)p Fu('\),)h(and)e(the)150 1959 y(rest)i(of)f(that)h(line.)275
+2116 y(Otherwise,)h(roughly)f(sp)s(eaking,)i(the)f(shell)g(reads)g(its)
+g(input)f(and)h(divides)f(the)i(input)e(in)m(to)h(w)m(ords)150
+2225 y(and)23 b(op)s(erators,)j(emplo)m(ying)e(the)g(quoting)h(rules)e
+(to)h(select)i(whic)m(h)d(meanings)h(to)h(assign)f(v)-5
+b(arious)23 b(w)m(ords)150 2335 y(and)30 b(c)m(haracters.)275
+2492 y(The)38 b(shell)h(then)f(parses)g(these)h(tok)m(ens)h(in)m(to)f
+(commands)g(and)f(other)h(constructs,)i(remo)m(v)m(es)f(the)150
+2602 y(sp)s(ecial)31 b(meaning)f(of)g(certain)h(w)m(ords)f(or)g(c)m
+(haracters,)i(expands)d(others,)h(redirects)h(input)e(and)g(output)150
+2711 y(as)d(needed,)g(executes)g(the)g(sp)s(eci\014ed)e(command,)j(w)m
+(aits)f(for)f(the)g(command's)g(exit)i(status,)f(and)f(mak)m(es)150
+2821 y(that)31 b(exit)g(status)g(a)m(v)-5 b(ailable)33
+b(for)d(further)f(insp)s(ection)h(or)h(pro)s(cessing.)150
+3043 y Fk(3.1.1)63 b(Shell)41 b(Op)s(eration)150 3190
+y Fu(The)c(follo)m(wing)h(is)f(a)h(brief)e(description)i(of)f(the)g
+(shell's)h(op)s(eration)f(when)f(it)i(reads)f(and)f(executes)j(a)150
+3299 y(command.)h(Basically)-8 b(,)34 b(the)c(shell)h(do)s(es)f(the)h
+(follo)m(wing:)199 3456 y(1.)61 b(Reads)42 b(its)h(input)e(from)h(a)g
+(\014le)h(\(see)g(Section)g(3.8)g([Shell)f(Scripts],)j(page)e(42\),)k
+(from)41 b(a)i(string)330 3566 y(supplied)30 b(as)h(an)g(argumen)m(t)h
+(to)g(the)f Ft(-c)g Fu(in)m(v)m(o)s(cation)i(option)f(\(see)g(Section)g
+(6.1)g([In)m(v)m(oking)g(Bash],)330 3675 y(page)f(86\),)h(or)e(from)g
+(the)h(user's)f(terminal.)199 3821 y(2.)61 b(Breaks)43
+b(the)g(input)f(in)m(to)h(w)m(ords)f(and)g(op)s(erators,)k(ob)s(eying)d
+(the)g(quoting)g(rules)f(describ)s(ed)f(in)330 3931 y(Section)27
+b(3.1.2)i([Quoting],)f(page)f(6.)40 b(These)26 b(tok)m(ens)i(are)f
+(separated)g(b)m(y)f Ft(metacharacters)p Fu(.)36 b(Alias)330
+4040 y(expansion)30 b(is)h(p)s(erformed)d(b)m(y)j(this)f(step)g(\(see)i
+(Section)f(6.6)g([Aliases],)i(page)e(94\).)199 4186 y(3.)61
+b(P)m(arses)35 b(the)g(tok)m(ens)g(in)m(to)h(simple)e(and)g(comp)s
+(ound)f(commands)h(\(see)h(Section)h(3.2)f([Shell)g(Com-)330
+4296 y(mands],)30 b(page)h(8\).)199 4442 y(4.)61 b(P)m(erforms)40
+b(the)h(v)-5 b(arious)40 b(shell)h(expansions)f(\(see)h(Section)g(3.5)g
+([Shell)g(Expansions],)h(page)f(22\),)330 4551 y(breaking)35
+b(the)g(expanded)g(tok)m(ens)h(in)m(to)g(lists)f(of)g(\014lenames)h
+(\(see)g(Section)f(3.5.8)i([Filename)g(Ex-)330 4661 y(pansion],)30
+b(page)h(33\))h(and)e(commands)g(and)g(argumen)m(ts.)199
+4807 y(5.)61 b(P)m(erforms)36 b(an)m(y)i(necessary)f(redirections)g
+(\(see)h(Section)f(3.6)h([Redirections],)i(page)e(35\))g(and)e(re-)330
+4916 y(mo)m(v)m(es)c(the)e(redirection)h(op)s(erators)g(and)f(their)g
+(op)s(erands)f(from)h(the)h(argumen)m(t)f(list.)199 5062
+y(6.)61 b(Executes)31 b(the)g(command)f(\(see)h(Section)g(3.7)h
+([Executing)f(Commands],)f(page)h(39\).)199 5208 y(7.)61
+b(Optionally)40 b(w)m(aits)g(for)f(the)g(command)g(to)h(complete)g(and)
+f(collects)i(its)f(exit)g(status)f(\(see)h(Sec-)330 5317
+y(tion)31 b(3.7.5)h([Exit)f(Status],)g(page)g(41\).)p
+eop end
+%%Page: 6 12
+TeXDict begin 6 11 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2292 b(6)150 299
+y Fk(3.1.2)63 b(Quoting)150 446 y Fu(Quoting)32 b(is)h(used)e(to)i
+(remo)m(v)m(e)h(the)e(sp)s(ecial)h(meaning)f(of)h(certain)g(c)m
+(haracters)g(or)f(w)m(ords)g(to)h(the)f(shell.)150 555
+y(Quoting)c(can)f(b)s(e)g(used)f(to)j(disable)e(sp)s(ecial)h(treatmen)m
+(t)h(for)e(sp)s(ecial)h(c)m(haracters,)i(to)e(prev)m(en)m(t)g(reserv)m
+(ed)150 665 y(w)m(ords)i(from)g(b)s(eing)g(recognized)h(as)g(suc)m(h,)f
+(and)g(to)h(prev)m(en)m(t)g(parameter)g(expansion.)275
+795 y(Eac)m(h)22 b(of)g(the)g(shell)g(metac)m(haracters)i(\(see)f
+(Chapter)e(2)i([De\014nitions],)h(page)f(3\))g(has)e(sp)s(ecial)i
+(meaning)150 905 y(to)40 b(the)g(shell)f(and)g(m)m(ust)g(b)s(e)g
+(quoted)g(if)h(it)g(is)f(to)h(represen)m(t)g(itself.)68
+b(When)39 b(the)h(command)f(history)150 1015 y(expansion)i(facilities)j
+(are)e(b)s(eing)f(used)g(\(see)h(Section)h(9.3)f([History)h(In)m
+(teraction],)j(page)c(148\),)47 b(the)150 1124 y Fr(history)30
+b(expansion)h Fu(c)m(haracter,)h(usually)f(`)p Ft(!)p
+Fu(',)g(m)m(ust)f(b)s(e)g(quoted)h(to)g(prev)m(en)m(t)g(history)g
+(expansion.)41 b(See)150 1234 y(Section)22 b(9.1)g([Bash)f(History)h(F)
+-8 b(acilities],)26 b(page)c(146,)j(for)20 b(more)h(details)h
+(concerning)g(history)f(expansion.)275 1364 y(There)37
+b(are)h(three)f(quoting)h(mec)m(hanisms:)56 b(the)38
+b Fr(escap)s(e)g(c)m(haracter)p Fu(,)j(single)d(quotes,)i(and)d(double)
+150 1474 y(quotes.)150 1665 y Fk(3.1.2.1)63 b(Escap)s(e)41
+b(Character)150 1812 y Fu(A)36 b(non-quoted)f(bac)m(kslash)h(`)p
+Ft(\\)p Fu(')g(is)f(the)h(Bash)g(escap)s(e)f(c)m(haracter.)58
+b(It)36 b(preserv)m(es)f(the)h(literal)h(v)-5 b(alue)36
+b(of)150 1921 y(the)27 b(next)g(c)m(haracter)h(that)f(follo)m(ws,)i
+(with)d(the)h(exception)g(of)g Ft(newline)p Fu(.)38 b(If)26
+b(a)h Ft(\\newline)d Fu(pair)i(app)s(ears,)150 2031 y(and)k(the)h(bac)m
+(kslash)g(itself)g(is)g(not)g(quoted,)g(the)f Ft(\\newline)f
+Fu(is)h(treated)i(as)f(a)g(line)g(con)m(tin)m(uation)h(\(that)150
+2140 y(is,)f(it)g(is)f(remo)m(v)m(ed)h(from)f(the)h(input)e(stream)i
+(and)f(e\013ectiv)m(ely)j(ignored\).)150 2331 y Fk(3.1.2.2)63
+b(Single)42 b(Quotes)150 2478 y Fu(Enclosing)24 b(c)m(haracters)h(in)e
+(single)h(quotes)g(\(`)p Ft(')p Fu('\))g(preserv)m(es)g(the)f(literal)i
+(v)-5 b(alue)24 b(of)g(eac)m(h)g(c)m(haracter)h(within)150
+2588 y(the)31 b(quotes.)42 b(A)31 b(single)h(quote)f(ma)m(y)g(not)g(o)s
+(ccur)g(b)s(et)m(w)m(een)g(single)h(quotes,)f(ev)m(en)h(when)d
+(preceded)i(b)m(y)g(a)150 2697 y(bac)m(kslash.)150 2888
+y Fk(3.1.2.3)63 b(Double)42 b(Quotes)150 3035 y Fu(Enclosing)24
+b(c)m(haracters)h(in)f(double)f(quotes)h(\(`)p Ft(")p
+Fu('\))g(preserv)m(es)g(the)g(literal)h(v)-5 b(alue)24
+b(of)g(all)g(c)m(haracters)h(within)150 3145 y(the)34
+b(quotes,)h(with)f(the)g(exception)h(of)f(`)p Ft($)p
+Fu(',)h(`)p Ft(`)p Fu(',)g(`)p Ft(\\)p Fu(',)g(and,)f(when)f(history)g
+(expansion)h(is)g(enabled,)h(`)p Ft(!)p Fu('.)150 3254
+y(When)c(the)g(shell)g(is)g(in)f Fm(posix)h Fu(mo)s(de)f(\(see)i
+(Section)g(6.11)g([Bash)f(POSIX)f(Mo)s(de],)i(page)g(101\),)h(the)e(`)p
+Ft(!)p Fu(')150 3364 y(has)d(no)g(sp)s(ecial)h(meaning)g(within)f
+(double)g(quotes,)h(ev)m(en)g(when)f(history)g(expansion)g(is)g
+(enabled.)40 b(The)150 3474 y(c)m(haracters)h(`)p Ft($)p
+Fu(')e(and)g(`)p Ft(`)p Fu(')g(retain)h(their)f(sp)s(ecial)h(meaning)f
+(within)g(double)g(quotes)h(\(see)g(Section)g(3.5)150
+3583 y([Shell)29 b(Expansions],)g(page)h(22\).)41 b(The)28
+b(bac)m(kslash)i(retains)f(its)h(sp)s(ecial)f(meaning)g(only)g(when)f
+(follo)m(w)m(ed)150 3693 y(b)m(y)41 b(one)f(of)h(the)g(follo)m(wing)h
+(c)m(haracters:)63 b(`)p Ft($)p Fu(',)43 b(`)p Ft(`)p
+Fu(',)h(`)p Ft(")p Fu(',)g(`)p Ft(\\)p Fu(',)f(or)e Ft(newline)p
+Fu(.)69 b(Within)41 b(double)f(quotes,)150 3802 y(bac)m(kslashes)25
+b(that)h(are)f(follo)m(w)m(ed)h(b)m(y)e(one)h(of)g(these)g(c)m
+(haracters)h(are)f(remo)m(v)m(ed.)40 b(Bac)m(kslashes)26
+b(preceding)150 3912 y(c)m(haracters)35 b(without)e(a)h(sp)s(ecial)f
+(meaning)h(are)f(left)h(unmo)s(di\014ed.)47 b(A)34 b(double)f(quote)g
+(ma)m(y)h(b)s(e)f(quoted)150 4022 y(within)h(double)h(quotes)g(b)m(y)g
+(preceding)g(it)g(with)g(a)g(bac)m(kslash.)55 b(If)35
+b(enabled,)h(history)f(expansion)g(will)150 4131 y(b)s(e)f(p)s
+(erformed)g(unless)g(an)h(`)p Ft(!)p Fu(')g(app)s(earing)f(in)h(double)
+f(quotes)i(is)f(escap)s(ed)g(using)f(a)h(bac)m(kslash.)55
+b(The)150 4241 y(bac)m(kslash)31 b(preceding)f(the)h(`)p
+Ft(!)p Fu(')f(is)h(not)g(remo)m(v)m(ed.)275 4371 y(The)41
+b(sp)s(ecial)h(parameters)f(`)p Ft(*)p Fu(')h(and)f(`)p
+Ft(@)p Fu(')h(ha)m(v)m(e)g(sp)s(ecial)g(meaning)g(when)f(in)g(double)g
+(quotes)h(\(see)150 4481 y(Section)31 b(3.5.3)h([Shell)f(P)m(arameter)h
+(Expansion],)e(page)h(25\).)150 4672 y Fk(3.1.2.4)63
+b(ANSI-C)40 b(Quoting)150 4819 y Fu(W)-8 b(ords)43 b(of)f(the)h(form)f
+Ft($')p Fj(string)p Ft(')e Fu(are)j(treated)g(sp)s(ecially)-8
+b(.)79 b(The)42 b(w)m(ord)g(expands)f(to)j Fr(string)p
+Fu(,)h(with)150 4928 y(bac)m(kslash-escap)s(ed)f(c)m(haracters)h
+(replaced)f(as)g(sp)s(eci\014ed)f(b)m(y)g(the)g(ANSI)g(C)g(standard.)79
+b(Bac)m(kslash)150 5038 y(escap)s(e)31 b(sequences,)g(if)f(presen)m(t,)
+h(are)g(deco)s(ded)f(as)g(follo)m(ws:)150 5189 y Ft(\\a)384
+b Fu(alert)31 b(\(b)s(ell\))150 5340 y Ft(\\b)384 b Fu(bac)m(kspace)p
+eop end
+%%Page: 7 13
+TeXDict begin 7 12 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2292 b(7)150 299
+y Ft(\\e)150 408 y(\\E)384 b Fu(an)30 b(escap)s(e)h(c)m(haracter)h
+(\(not)f(ANSI)f(C\))150 566 y Ft(\\f)384 b Fu(form)30
+b(feed)150 723 y Ft(\\n)384 b Fu(newline)150 880 y Ft(\\r)g
+Fu(carriage)32 b(return)150 1037 y Ft(\\t)384 b Fu(horizon)m(tal)32
+b(tab)150 1194 y Ft(\\v)384 b Fu(v)m(ertical)32 b(tab)150
+1351 y Ft(\\\\)384 b Fu(bac)m(kslash)150 1508 y Ft(\\')g
+Fu(single)31 b(quote)150 1665 y Ft(\\")384 b Fu(double)30
+b(quote)150 1823 y Ft(\\?)384 b Fu(question)31 b(mark)150
+1980 y Ft(\\)p Fj(nnn)288 b Fu(the)36 b(eigh)m(t-bit)h(c)m(haracter)g
+(whose)f(v)-5 b(alue)36 b(is)f(the)h(o)s(ctal)h(v)-5
+b(alue)36 b Fr(nnn)e Fu(\(one)i(to)h(three)f(o)s(ctal)630
+2089 y(digits\))150 2246 y Ft(\\x)p Fj(HH)288 b Fu(the)36
+b(eigh)m(t-bit)i(c)m(haracter)f(whose)f(v)-5 b(alue)36
+b(is)g(the)g(hexadecimal)h(v)-5 b(alue)36 b Fr(HH)46
+b Fu(\(one)37 b(or)f(t)m(w)m(o)630 2356 y(hex)30 b(digits\))150
+2513 y Ft(\\u)p Fj(HHHH)192 b Fu(the)33 b(Unico)s(de)f(\(ISO/IEC)g
+(10646\))j(c)m(haracter)f(whose)e(v)-5 b(alue)33 b(is)g(the)g
+(hexadecimal)g(v)-5 b(alue)630 2623 y Fr(HHHH)41 b Fu(\(one)31
+b(to)g(four)f(hex)g(digits\))150 2780 y Ft(\\U)p Fj(HHHHHHHH)630
+2889 y Fu(the)j(Unico)s(de)f(\(ISO/IEC)g(10646\))j(c)m(haracter)f
+(whose)e(v)-5 b(alue)33 b(is)g(the)g(hexadecimal)g(v)-5
+b(alue)630 2999 y Fr(HHHHHHHH)42 b Fu(\(one)31 b(to)g(eigh)m(t)g(hex)g
+(digits\))150 3156 y Ft(\\c)p Fj(x)336 b Fu(a)31 b(con)m(trol-)p
+Fr(x)38 b Fu(c)m(haracter)150 3313 y(The)30 b(expanded)f(result)i(is)f
+(single-quoted,)i(as)f(if)f(the)g(dollar)h(sign)g(had)e(not)i(b)s(een)f
+(presen)m(t.)150 3510 y Fk(3.1.2.5)63 b(Lo)s(cale-Sp)s(eci\014c)41
+b(T)-10 b(ranslation)150 3657 y Fu(A)28 b(double-quoted)g(string)f
+(preceded)h(b)m(y)f(a)h(dollar)h(sign)e(\(`)p Ft($)p
+Fu('\))i(will)f(cause)g(the)g(string)g(to)g(b)s(e)f(translated)150
+3767 y(according)37 b(to)g(the)f(curren)m(t)g(lo)s(cale.)59
+b(The)36 b Fr(gettext)k Fu(infrastructure)35 b(p)s(erforms)g(the)h
+(message)h(catalog)150 3876 y(lo)s(okup)21 b(and)g(translation,)k
+(using)c(the)h Ft(LC_MESSAGES)d Fu(and)i Ft(TEXTDOMAIN)e
+Fu(shell)i(v)-5 b(ariables,)25 b(as)d(explained)150 3986
+y(b)s(elo)m(w.)57 b(See)36 b(the)g(gettext)i(do)s(cumen)m(tation)e(for)
+g(additional)g(details.)58 b(If)35 b(the)h(curren)m(t)f(lo)s(cale)j(is)
+e Ft(C)f Fu(or)150 4096 y Ft(POSIX)p Fu(,)g(or)g(if)g(there)g(are)h(no)
+f(translations)h(a)m(v)-5 b(ailable,)38 b(the)e(dollar)f(sign)g(is)g
+(ignored.)55 b(If)35 b(the)g(string)g(is)150 4205 y(translated)c(and)f
+(replaced,)h(the)f(replacemen)m(t)i(is)f(double-quoted.)275
+4339 y(Some)20 b(systems)h(use)f(the)h(message)h(catalog)h(selected)f
+(b)m(y)f(the)g Ft(LC_MESSAGES)c Fu(shell)k(v)-5 b(ariable.)39
+b(Others)150 4448 y(create)g(the)e(name)g(of)g(the)g(message)h(catalog)
+i(from)d(the)g(v)-5 b(alue)37 b(of)g(the)h Ft(TEXTDOMAIN)c
+Fu(shell)j(v)-5 b(ariable,)150 4558 y(p)s(ossibly)31
+b(adding)g(a)g(su\016x)g(of)h(`)p Ft(.mo)p Fu('.)43 b(If)31
+b(y)m(ou)h(use)f(the)h Ft(TEXTDOMAIN)c Fu(v)-5 b(ariable,)33
+b(y)m(ou)f(ma)m(y)g(need)f(to)h(set)150 4667 y(the)22
+b Ft(TEXTDOMAINDIR)d Fu(v)-5 b(ariable)23 b(to)g(the)f(lo)s(cation)i
+(of)e(the)h(message)g(catalog)i(\014les.)38 b(Still)23
+b(others)f(use)g(b)s(oth)150 4777 y(v)-5 b(ariables)31
+b(in)f(this)g(fashion:)41 b Ft(TEXTDOMAINDIR)p Fu(/)p
+Ft(LC_MESSAGES)p Fu(/LC)p 2528 4777 28 4 v 34 w(MESSA)m(GES/)p
+Ft(TEXTDOMAIN)p Fu(.mo.)150 4974 y Fk(3.1.3)63 b(Commen)m(ts)150
+5121 y Fu(In)21 b(a)i(non-in)m(teractiv)m(e)h(shell,)g(or)e(an)g(in)m
+(teractiv)m(e)j(shell)d(in)g(whic)m(h)g(the)g Ft(interactive_comments)
+16 b Fu(option)150 5230 y(to)40 b(the)f Ft(shopt)e Fu(builtin)h(is)h
+(enabled)g(\(see)h(Section)g(4.3.2)g([The)f(Shopt)f(Builtin],)k(page)e
+(66\),)i(a)d(w)m(ord)150 5340 y(b)s(eginning)26 b(with)g(`)p
+Ft(#)p Fu(')g(causes)h(that)f(w)m(ord)g(and)g(all)h(remaining)g(c)m
+(haracters)g(on)f(that)h(line)g(to)g(b)s(e)f(ignored.)p
+eop end
+%%Page: 8 14
+TeXDict begin 8 13 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2292 b(8)150 299
+y(An)43 b(in)m(teractiv)m(e)j(shell)e(without)f(the)g
+Ft(interactive_comments)38 b Fu(option)44 b(enabled)f(do)s(es)g(not)g
+(allo)m(w)150 408 y(commen)m(ts.)56 b(The)34 b Ft(interactive_comments)
+c Fu(option)35 b(is)g(on)g(b)m(y)g(default)g(in)g(in)m(teractiv)m(e)j
+(shells.)55 b(See)150 518 y(Section)30 b(6.3)f([In)m(teractiv)m(e)j
+(Shells],)d(page)h(89,)g(for)e(a)i(description)e(of)h(what)g(mak)m(es)h
+(a)f(shell)g(in)m(teractiv)m(e.)150 757 y Fs(3.2)68 b(Shell)45
+b(Commands)150 916 y Fu(A)d(simple)g(shell)g(command)f(suc)m(h)h(as)g
+Ft(echo)29 b(a)h(b)g(c)41 b Fu(consists)i(of)f(the)f(command)h(itself)h
+(follo)m(w)m(ed)g(b)m(y)150 1026 y(argumen)m(ts,)31 b(separated)g(b)m
+(y)f(spaces.)275 1159 y(More)h(complex)h(shell)f(commands)g(are)g(comp)
+s(osed)g(of)g(simple)g(commands)g(arranged)g(together)h(in)150
+1269 y(a)f(v)-5 b(ariet)m(y)32 b(of)f(w)m(a)m(ys:)41
+b(in)31 b(a)g(pip)s(eline)f(in)g(whic)m(h)g(the)h(output)f(of)h(one)f
+(command)h(b)s(ecomes)f(the)h(input)f(of)150 1378 y(a)h(second,)f(in)h
+(a)f(lo)s(op)h(or)f(conditional)i(construct,)f(or)f(in)g(some)h(other)g
+(grouping.)150 1575 y Fk(3.2.1)63 b(Reserv)m(ed)40 b(W)-10
+b(ords)150 1722 y Fu(Reserv)m(ed)33 b(w)m(ords)g(are)g(w)m(ords)g(that)
+g(ha)m(v)m(e)h(sp)s(ecial)g(meaning)f(to)h(the)f(shell.)49
+b(They)32 b(are)h(used)g(to)g(b)s(egin)150 1832 y(and)d(end)f(the)i
+(shell's)g(comp)s(ound)e(commands.)275 1965 y(The)k(follo)m(wing)i(w)m
+(ords)e(are)h(recognized)i(as)e(reserv)m(ed)f(when)g(unquoted)g(and)g
+(the)h(\014rst)f(w)m(ord)h(of)g(a)150 2075 y(command)c(\(see)h(b)s(elo)
+m(w)g(for)f(exceptions\):)150 2208 y Ft(if)364 b(then)168
+b(elif)g(else)g(fi)336 b(time)150 2318 y(for)316 b(in)264
+b(until)120 b(while)g(do)336 b(done)150 2427 y(case)268
+b(esac)168 b(coproc)72 b(select)g(function)150 2537 y({)412
+b(})312 b([[)264 b(]])g(!)150 2670 y(in)33 b Fu(is)h(recognized)h(as)f
+(a)g(reserv)m(ed)f(w)m(ord)h(if)f(it)h(is)g(the)g(third)f(w)m(ord)g(of)
+h(a)g Ft(case)e Fu(or)i Ft(select)e Fu(command.)150 2780
+y Ft(in)e Fu(and)g Ft(do)f Fu(are)i(recognized)h(as)e(reserv)m(ed)h(w)m
+(ords)f(if)g(they)h(are)f(the)h(third)f(w)m(ord)g(in)g(a)g
+Ft(for)g Fu(command.)150 2977 y Fk(3.2.2)63 b(Simple)41
+b(Commands)150 3124 y Fu(A)29 b(simple)f(command)g(is)h(the)g(kind)e
+(of)i(command)f(encoun)m(tered)h(most)g(often.)40 b(It's)29
+b(just)f(a)h(sequence)g(of)150 3233 y(w)m(ords)22 b(separated)i(b)m(y)e
+Ft(blank)p Fu(s,)i(terminated)f(b)m(y)g(one)g(of)g(the)g(shell's)g(con)
+m(trol)h(op)s(erators)f(\(see)h(Chapter)f(2)150 3343
+y([De\014nitions],)37 b(page)e(3\).)54 b(The)35 b(\014rst)e(w)m(ord)i
+(generally)g(sp)s(eci\014es)g(a)g(command)f(to)h(b)s(e)f(executed,)j
+(with)150 3452 y(the)31 b(rest)f(of)h(the)f(w)m(ords)g(b)s(eing)g(that)
+h(command's)f(argumen)m(ts.)275 3586 y(The)h(return)h(status)g(\(see)i
+(Section)f(3.7.5)h([Exit)f(Status],)h(page)f(41\))g(of)g(a)g(simple)f
+(command)g(is)h(its)150 3695 y(exit)38 b(status)f(as)g(pro)m(vided)f(b)
+m(y)h(the)g Fm(posix)f Fu(1003.1)j Ft(waitpid)c Fu(function,)j(or)f
+(128)p Ft(+)p Fr(n)g Fu(if)g(the)g(command)150 3805 y(w)m(as)31
+b(terminated)g(b)m(y)f(signal)h Fr(n)p Fu(.)150 4002
+y Fk(3.2.3)63 b(Pip)s(elines)150 4149 y Fu(A)21 b Ft(pipeline)d
+Fu(is)j(a)g(sequence)g(of)g(one)g(or)g(more)g(commands)f(separated)h(b)
+m(y)g(one)g(of)g(the)g(con)m(trol)h(op)s(erators)150
+4259 y(`)p Ft(|)p Fu(')31 b(or)f(`)p Ft(|&)p Fu('.)275
+4392 y(The)f(format)i(for)f(a)h(pip)s(eline)f(is)390
+4525 y Ft([time)46 b([-p]])h([!])g Fj(command1)e Ft([)j(|)f(or)g(|&)g
+Fj(command2)f Ft(])h(...)150 4659 y Fu(The)25 b(output)f(of)i(eac)m(h)g
+(command)f(in)f(the)i(pip)s(eline)e(is)i(connected)g(via)f(a)h(pip)s(e)
+e(to)i(the)f(input)f(of)h(the)h(next)150 4768 y(command.)40
+b(That)29 b(is,)h(eac)m(h)h(command)e(reads)g(the)h(previous)f
+(command's)g(output.)40 b(This)29 b(connection)150 4878
+y(is)h(p)s(erformed)f(b)s(efore)h(an)m(y)h(redirections)g(sp)s
+(eci\014ed)f(b)m(y)g(the)g(command.)275 5011 y(If)k(`)p
+Ft(|&)p Fu(')h(is)f(used,)i Fr(command1)7 b Fu('s)35
+b(standard)f(error,)i(in)e(addition)h(to)h(its)f(standard)f(output,)i
+(is)e(con-)150 5121 y(nected)h(to)g Fr(command2)7 b Fu('s)35
+b(standard)f(input)f(through)h(the)g(pip)s(e;)i(it)f(is)g(shorthand)e
+(for)h Ft(2>&1)29 b(|)p Fu(.)53 b(This)150 5230 y(implicit)41
+b(redirection)f(of)g(the)g(standard)f(error)g(to)h(the)g(standard)f
+(output)g(is)h(p)s(erformed)e(after)j(an)m(y)150 5340
+y(redirections)31 b(sp)s(eci\014ed)f(b)m(y)g(the)g(command.)p
+eop end
+%%Page: 9 15
+TeXDict begin 9 14 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2292 b(9)275 299
+y(The)36 b(reserv)m(ed)g(w)m(ord)g Ft(time)g Fu(causes)h(timing)g
+(statistics)h(to)f(b)s(e)f(prin)m(ted)g(for)g(the)h(pip)s(eline)f(once)
+h(it)150 408 y(\014nishes.)51 b(The)34 b(statistics)i(curren)m(tly)e
+(consist)h(of)f(elapsed)h(\(w)m(all-clo)s(c)m(k\))i(time)e(and)f(user)f
+(and)h(system)150 518 y(time)e(consumed)e(b)m(y)h(the)g(command's)g
+(execution.)44 b(The)31 b Ft(-p)f Fu(option)i(c)m(hanges)g(the)f
+(output)g(format)g(to)150 628 y(that)j(sp)s(eci\014ed)e(b)m(y)h
+Fm(posix)p Fu(.)49 b(When)33 b(the)g(shell)g(is)h(in)e
+Fm(posix)h Fu(mo)s(de)g(\(see)h(Section)g(6.11)g([Bash)g(POSIX)150
+737 y(Mo)s(de],)j(page)e(101\),)j(it)e(do)s(es)e(not)i(recognize)g
+Ft(time)e Fu(as)h(a)h(reserv)m(ed)f(w)m(ord)f(if)h(the)g(next)g(tok)m
+(en)h(b)s(egins)150 847 y(with)d(a)g(`)p Ft(-)p Fu('.)49
+b(The)33 b Ft(TIMEFORMAT)d Fu(v)-5 b(ariable)34 b(ma)m(y)g(b)s(e)f(set)
+g(to)h(a)g(format)f(string)g(that)h(sp)s(eci\014es)f(ho)m(w)g(the)150
+956 y(timing)38 b(information)g(should)e(b)s(e)h(displa)m(y)m(ed.)62
+b(See)38 b(Section)g(5.2)g([Bash)g(V)-8 b(ariables],)41
+b(page)d(73,)i(for)e(a)150 1066 y(description)27 b(of)g(the)h(a)m(v)-5
+b(ailable)29 b(formats.)40 b(The)26 b(use)h(of)g Ft(time)f
+Fu(as)i(a)f(reserv)m(ed)g(w)m(ord)g(p)s(ermits)f(the)h(timing)150
+1176 y(of)38 b(shell)g(builtins,)i(shell)e(functions,)i(and)d(pip)s
+(elines.)63 b(An)38 b(external)h Ft(time)e Fu(command)h(cannot)g(time)
+150 1285 y(these)31 b(easily)-8 b(.)275 1418 y(When)26
+b(the)h(shell)g(is)g(in)g Fm(posix)f Fu(mo)s(de)g(\(see)i(Section)f
+(6.11)i([Bash)e(POSIX)f(Mo)s(de],)i(page)g(101\),)h Ft(time)150
+1527 y Fu(ma)m(y)d(b)s(e)f(follo)m(w)m(ed)j(b)m(y)d(a)h(newline.)39
+b(In)25 b(this)h(case,)i(the)d(shell)h(displa)m(ys)g(the)g(total)h
+(user)e(and)g(system)h(time)150 1637 y(consumed)33 b(b)m(y)h(the)h
+(shell)f(and)f(its)i(c)m(hildren.)51 b(The)34 b Ft(TIMEFORMAT)d
+Fu(v)-5 b(ariable)35 b(ma)m(y)g(b)s(e)e(used)g(to)i(sp)s(ecify)150
+1746 y(the)c(format)f(of)h(the)f(time)h(information.)275
+1879 y(If)24 b(the)h(pip)s(eline)g(is)g(not)g(executed)h(async)m
+(hronously)f(\(see)h(Section)g(3.2.4)h([Lists],)g(page)e(9\),)i(the)f
+(shell)150 1988 y(w)m(aits)31 b(for)f(all)i(commands)e(in)g(the)g(pip)s
+(eline)g(to)h(complete.)275 2121 y(Eac)m(h)e(command)g(in)g(a)g(pip)s
+(eline)g(is)g(executed)h(in)e(its)i(o)m(wn)f(subshell,)f(whic)m(h)h(is)
+g(a)g(separate)h(pro)s(cess)150 2230 y(\(see)g(Section)g(3.7.3)h
+([Command)e(Execution)h(En)m(vironmen)m(t],)g(page)g(40\).)41
+b(If)29 b(the)g Ft(lastpipe)e Fu(option)j(is)150 2340
+y(enabled)35 b(using)g(the)g Ft(shopt)f Fu(builtin)g(\(see)i(Section)g
+(4.3.2)h([The)e(Shopt)f(Builtin],)j(page)f(66\),)i(the)d(last)150
+2450 y(elemen)m(t)d(of)e(a)h(pip)s(eline)f(ma)m(y)h(b)s(e)f(run)f(b)m
+(y)h(the)h(shell)f(pro)s(cess.)275 2582 y(The)24 b(exit)i(status)f(of)h
+(a)f(pip)s(eline)g(is)g(the)g(exit)h(status)f(of)h(the)f(last)h
+(command)f(in)f(the)i(pip)s(eline,)g(unless)150 2692
+y(the)31 b Ft(pipefail)d Fu(option)j(is)g(enabled)f(\(see)i(Section)f
+(4.3.1)i([The)d(Set)h(Builtin],)g(page)h(62\).)42 b(If)30
+b Ft(pipefail)150 2801 y Fu(is)f(enabled,)g(the)f(pip)s(eline's)g
+(return)g(status)h(is)f(the)h(v)-5 b(alue)29 b(of)f(the)h(last)g
+(\(righ)m(tmost\))i(command)d(to)h(exit)150 2911 y(with)34
+b(a)h(non-zero)g(status,)i(or)d(zero)i(if)e(all)i(commands)e(exit)h
+(successfully)-8 b(.)54 b(If)34 b(the)h(reserv)m(ed)g(w)m(ord)f(`)p
+Ft(!)p Fu(')150 3020 y(precedes)e(the)f(pip)s(eline,)h(the)f(exit)i
+(status)f(is)f(the)h(logical)i(negation)f(of)e(the)h(exit)g(status)g
+(as)g(describ)s(ed)150 3130 y(ab)s(o)m(v)m(e.)63 b(The)38
+b(shell)f(w)m(aits)i(for)e(all)i(commands)e(in)g(the)h(pip)s(eline)f
+(to)h(terminate)h(b)s(efore)e(returning)g(a)150 3240
+y(v)-5 b(alue.)150 3435 y Fk(3.2.4)63 b(Lists)41 b(of)h(Commands)150
+3582 y Fu(A)37 b Ft(list)e Fu(is)i(a)g(sequence)g(of)g(one)g(or)f(more)
+h(pip)s(elines)f(separated)h(b)m(y)g(one)g(of)f(the)h(op)s(erators)g(`)
+p Ft(;)p Fu(',)i(`)p Ft(&)p Fu(',)150 3691 y(`)p Ft(&&)p
+Fu(',)31 b(or)f(`)p Ft(||)p Fu(',)g(and)g(optionally)i(terminated)f(b)m
+(y)f(one)h(of)f(`)p Ft(;)p Fu(',)h(`)p Ft(&)p Fu(',)g(or)f(a)h
+Ft(newline)p Fu(.)275 3824 y(Of)23 b(these)h(list)g(op)s(erators,)i(`)p
+Ft(&&)p Fu(')d(and)g(`)p Ft(||)p Fu(')h(ha)m(v)m(e)h(equal)f
+(precedence,)i(follo)m(w)m(ed)f(b)m(y)f(`)p Ft(;)p Fu(')g(and)f(`)p
+Ft(&)p Fu(',)i(whic)m(h)150 3933 y(ha)m(v)m(e)32 b(equal)e(precedence.)
+275 4066 y(A)f(sequence)h(of)g(one)g(or)g(more)g(newlines)f(ma)m(y)h
+(app)s(ear)f(in)h(a)g Ft(list)e Fu(to)j(delimit)f(commands,)g(equiv-)
+150 4175 y(alen)m(t)i(to)f(a)g(semicolon.)275 4308 y(If)c(a)h(command)f
+(is)h(terminated)g(b)m(y)g(the)g(con)m(trol)h(op)s(erator)f(`)p
+Ft(&)p Fu(',)h(the)e(shell)h(executes)h(the)f(command)150
+4418 y(async)m(hronously)g(in)h(a)g(subshell.)39 b(This)28
+b(is)h(kno)m(wn)f(as)h(executing)h(the)f(command)g(in)f(the)h
+Fr(bac)m(kground)p Fu(,)150 4527 y(and)42 b(these)i(are)f(referred)g
+(to)g(as)h Fr(async)m(hronous)i Fu(commands.)78 b(The)43
+b(shell)g(do)s(es)g(not)g(w)m(ait)h(for)f(the)150 4637
+y(command)34 b(to)h(\014nish,)f(and)f(the)h(return)f(status)i(is)f(0)g
+(\(true\).)53 b(When)34 b(job)g(con)m(trol)h(is)f(not)h(activ)m(e)h
+(\(see)150 4746 y(Chapter)27 b(7)h([Job)f(Con)m(trol],)i(page)g(107\),)
+h(the)d(standard)g(input)f(for)i(async)m(hronous)f(commands,)h(in)f
+(the)150 4856 y(absence)k(of)f(an)m(y)h(explicit)h(redirections,)f(is)f
+(redirected)h(from)f Ft(/dev/null)p Fu(.)275 4988 y(Commands)19
+b(separated)j(b)m(y)f(a)g(`)p Ft(;)p Fu(')g(are)h(executed)g(sequen)m
+(tially;)k(the)21 b(shell)g(w)m(aits)h(for)f(eac)m(h)h(command)150
+5098 y(to)31 b(terminate)h(in)e(turn.)39 b(The)30 b(return)f(status)i
+(is)f(the)h(exit)g(status)g(of)g(the)f(last)h(command)f(executed.)275
+5230 y Fm(and)g Fu(and)h Fm(or)g Fu(lists)h(are)g(sequences)f(of)h(one)
+g(or)f(more)h(pip)s(elines)e(separated)i(b)m(y)g(the)f(con)m(trol)i(op)
+s(er-)150 5340 y(ators)e(`)p Ft(&&)p Fu(')f(and)g(`)p
+Ft(||)p Fu(',)h(resp)s(ectiv)m(ely)-8 b(.)42 b Fm(and)30
+b Fu(and)f Fm(or)h Fu(lists)h(are)g(executed)g(with)f(left)h(asso)s
+(ciativit)m(y)-8 b(.)p eop end
+%%Page: 10 16
+TeXDict begin 10 15 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(10)275 299
+y(An)30 b Fm(and)f Fu(list)i(has)f(the)h(form)390 433
+y Fj(command1)46 b Ft(&&)h Fj(command2)150 567 y Fr(command2)38
+b Fu(is)30 b(executed)i(if,)e(and)g(only)g(if,)h Fr(command1)38
+b Fu(returns)29 b(an)h(exit)h(status)g(of)g(zero)g(\(success\).)275
+701 y(An)f Fm(or)f Fu(list)i(has)f(the)h(form)390 835
+y Fj(command1)46 b Ft(||)h Fj(command2)150 969 y Fr(command2)38
+b Fu(is)30 b(executed)i(if,)e(and)g(only)g(if,)h Fr(command1)38
+b Fu(returns)29 b(a)i(non-zero)g(exit)g(status.)275 1103
+y(The)h(return)g(status)i(of)f Fm(and)f Fu(and)h Fm(or)f
+Fu(lists)i(is)f(the)g(exit)h(status)g(of)f(the)g(last)h(command)f
+(executed)150 1213 y(in)d(the)h(list.)150 1412 y Fk(3.2.5)63
+b(Comp)s(ound)42 b(Commands)150 1558 y Fu(Comp)s(ound)29
+b(commands)h(are)i(the)f(shell)g(programming)f(language)j(constructs.)
+42 b(Eac)m(h)32 b(construct)f(b)s(e-)150 1668 y(gins)25
+b(with)f(a)i(reserv)m(ed)f(w)m(ord)f(or)h(con)m(trol)h(op)s(erator)f
+(and)g(is)g(terminated)g(b)m(y)g(a)g(corresp)s(onding)f(reserv)m(ed)150
+1778 y(w)m(ord)i(or)g(op)s(erator.)40 b(An)m(y)26 b(redirections)g
+(\(see)i(Section)f(3.6)g([Redirections],)h(page)f(35\))h(asso)s(ciated)
+f(with)150 1887 y(a)k(comp)s(ound)f(command)h(apply)f(to)i(all)g
+(commands)f(within)f(that)i(comp)s(ound)d(command)i(unless)f(ex-)150
+1997 y(plicitly)i(o)m(v)m(erridden.)275 2131 y(In)20
+b(most)h(cases)g(a)g(list)h(of)f(commands)f(in)g(a)h(comp)s(ound)f
+(command's)g(description)h(ma)m(y)g(b)s(e)f(separated)150
+2240 y(from)30 b(the)h(rest)g(of)g(the)g(command)g(b)m(y)f(one)h(or)g
+(more)g(newlines,)g(and)f(ma)m(y)i(b)s(e)e(follo)m(w)m(ed)i(b)m(y)f(a)g
+(newline)150 2350 y(in)f(place)h(of)g(a)g(semicolon.)275
+2484 y(Bash)45 b(pro)m(vides)h(lo)s(oping)g(constructs,)j(conditional)e
+(commands,)j(and)44 b(mec)m(hanisms)i(to)g(group)150
+2594 y(commands)30 b(and)g(execute)i(them)e(as)g(a)h(unit.)150
+2792 y Fk(3.2.5.1)63 b(Lo)s(oping)43 b(Constructs)150
+2939 y Fu(Bash)31 b(supp)s(orts)d(the)j(follo)m(wing)g(lo)s(oping)g
+(constructs.)275 3073 y(Note)k(that)f(wherev)m(er)g(a)g(`)p
+Ft(;)p Fu(')g(app)s(ears)f(in)h(the)g(description)g(of)g(a)g(command's)
+g(syn)m(tax,)i(it)e(ma)m(y)h(b)s(e)150 3183 y(replaced)c(with)f(one)h
+(or)f(more)g(newlines.)150 3341 y Ft(until)240 b Fu(The)30
+b(syn)m(tax)h(of)f(the)h Ft(until)e Fu(command)h(is:)870
+3476 y Ft(until)46 b Fj(test-commands)p Ft(;)e(do)j Fj
+(consequent-commands)p Ft(;)c(done)630 3610 y Fu(Execute)f
+Fr(consequen)m(t-commands)k Fu(as)41 b(long)h(as)f Fr(test-commands)46
+b Fu(has)41 b(an)g(exit)h(status)630 3719 y(whic)m(h)c(is)h(not)g
+(zero.)67 b(The)38 b(return)g(status)h(is)f(the)h(exit)h(status)f(of)g
+(the)g(last)g(command)630 3829 y(executed)31 b(in)f Fr(consequen)m
+(t-commands)p Fu(,)i(or)e(zero)h(if)g(none)f(w)m(as)h(executed.)150
+3987 y Ft(while)240 b Fu(The)30 b(syn)m(tax)h(of)f(the)h
+Ft(while)e Fu(command)h(is:)870 4122 y Ft(while)46 b
+Fj(test-commands)p Ft(;)e(do)j Fj(consequent-commands)p
+Ft(;)c(done)630 4256 y Fu(Execute)f Fr(consequen)m(t-commands)k
+Fu(as)41 b(long)h(as)f Fr(test-commands)46 b Fu(has)41
+b(an)g(exit)h(status)630 4365 y(of)34 b(zero.)53 b(The)34
+b(return)f(status)h(is)h(the)f(exit)h(status)g(of)f(the)g(last)h
+(command)f(executed)h(in)630 4475 y Fr(consequen)m(t-commands)p
+Fu(,)c(or)g(zero)g(if)f(none)g(w)m(as)h(executed.)150
+4633 y Ft(for)336 b Fu(The)30 b(syn)m(tax)h(of)f(the)h
+Ft(for)e Fu(command)i(is:)870 4768 y Ft(for)47 b Fj(name)g
+Ft([)g([in)g([)p Fj(words)f Ft(...)o(])i(])f(;)h(])f(do)g
+Fj(commands)p Ft(;)e(done)630 4902 y Fu(Expand)30 b Fr(w)m(ords)k
+Fu(\(see)d(Section)h(3.5)g([Shell)f(Expansions],)g(page)g(22\),)i(and)d
+(execute)i Fr(com-)630 5011 y(mands)43 b Fu(once)e(for)g(eac)m(h)g(mem)
+m(b)s(er)f(in)g(the)h(resultan)m(t)g(list,)j(with)c Fr(name)46
+b Fu(b)s(ound)39 b(to)i(the)630 5121 y(curren)m(t)34
+b(mem)m(b)s(er.)53 b(If)35 b(`)p Ft(in)30 b Fj(words)p
+Fu(')j(is)i(not)g(presen)m(t,)h(the)f Ft(for)e Fu(command)i(executes)h
+(the)630 5230 y Fr(commands)j Fu(once)e(for)f(eac)m(h)h(p)s(ositional)g
+(parameter)f(that)h(is)f(set,)i(as)e(if)g(`)p Ft(in)30
+b("$@")p Fu(')36 b(had)630 5340 y(b)s(een)30 b(sp)s(eci\014ed)f(\(see)j
+(Section)f(3.4.2)h([Sp)s(ecial)f(P)m(arameters],)h(page)f(21\).)p
+eop end
+%%Page: 11 17
+TeXDict begin 11 16 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(11)630 299
+y(The)27 b(return)f(status)h(is)g(the)h(exit)g(status)f(of)g(the)h
+(last)g(command)e(that)i(executes.)41 b(If)27 b(there)630
+408 y(are)38 b(no)f(items)g(in)g(the)h(expansion)f(of)g
+Fr(w)m(ords)p Fu(,)i(no)e(commands)g(are)g(executed,)j(and)d(the)630
+518 y(return)29 b(status)i(is)f(zero.)630 644 y(An)g(alternate)i(form)e
+(of)h(the)f Ft(for)g Fu(command)g(is)g(also)h(supp)s(orted:)870
+771 y Ft(for)47 b(\(\()g Fj(expr1)f Ft(;)i Fj(expr2)e
+Ft(;)i Fj(expr3)e Ft(\)\))h(;)h(do)f Fj(commands)e Ft(;)j(done)630
+897 y Fu(First,)38 b(the)f(arithmetic)h(expression)e
+Fr(expr1)43 b Fu(is)36 b(ev)-5 b(aluated)38 b(according)f(to)g(the)g
+(rules)f(de-)630 1007 y(scrib)s(ed)41 b(b)s(elo)m(w)h(\(see)h(Section)g
+(6.5)g([Shell)g(Arithmetic],)j(page)d(93\).)77 b(The)42
+b(arithmetic)630 1116 y(expression)33 b Fr(expr2)41 b
+Fu(is)34 b(then)f(ev)-5 b(aluated)35 b(rep)s(eatedly)f(un)m(til)g(it)g
+(ev)-5 b(aluates)35 b(to)g(zero.)51 b(Eac)m(h)630 1226
+y(time)23 b Fr(expr2)30 b Fu(ev)-5 b(aluates)25 b(to)e(a)g(non-zero)h
+(v)-5 b(alue,)25 b Fr(commands)h Fu(are)d(executed)g(and)g(the)g
+(arith-)630 1335 y(metic)29 b(expression)f Fr(expr3)36
+b Fu(is)28 b(ev)-5 b(aluated.)41 b(If)28 b(an)m(y)h(expression)f(is)g
+(omitted,)i(it)f(b)s(eha)m(v)m(es)g(as)630 1445 y(if)i(it)h(ev)-5
+b(aluates)32 b(to)g(1.)44 b(The)30 b(return)g(v)-5 b(alue)32
+b(is)f(the)g(exit)h(status)g(of)f(the)g(last)h(command)f(in)630
+1555 y Fr(commands)j Fu(that)d(is)f(executed,)i(or)e(false)h(if)f(an)m
+(y)h(of)g(the)f(expressions)g(is)h(in)m(v)-5 b(alid.)275
+1698 y(The)26 b Ft(break)g Fu(and)h Ft(continue)e Fu(builtins)i(\(see)h
+(Section)h(4.1)f([Bourne)g(Shell)f(Builtins],)i(page)f(44\))g(ma)m(y)
+150 1807 y(b)s(e)i(used)f(to)i(con)m(trol)h(lo)s(op)f(execution.)150
+1990 y Fk(3.2.5.2)63 b(Conditional)42 b(Constructs)150
+2154 y Ft(if)384 b Fu(The)30 b(syn)m(tax)h(of)f(the)h
+Ft(if)f Fu(command)g(is:)870 2280 y Ft(if)47 b Fj(test-commands)p
+Ft(;)d(then)965 2390 y Fj(consequent-commands)p Ft(;)870
+2500 y([elif)i Fj(more-test-commands)p Ft(;)d(then)965
+2609 y Fj(more-consequents)p Ft(;])870 2719 y([else)j
+Fj(alternate-consequents)p Ft(;])870 2828 y(fi)630 2955
+y Fu(The)53 b Fr(test-commands)58 b Fu(list)c(is)g(executed,)60
+b(and)53 b(if)g(its)h(return)e(status)i(is)f(zero,)61
+b(the)630 3064 y Fr(consequen)m(t-commands)44 b Fu(list)d(is)f
+(executed.)70 b(If)40 b Fr(test-commands)k Fu(returns)39
+b(a)h(non-zero)630 3174 y(status,)45 b(eac)m(h)e Ft(elif)d
+Fu(list)i(is)g(executed)h(in)e(turn,)j(and)d(if)g(its)h(exit)h(status)f
+(is)f(zero,)46 b(the)630 3284 y(corresp)s(onding)37 b
+Fr(more-consequen)m(ts)42 b Fu(is)c(executed)g(and)f(the)h(command)g
+(completes.)63 b(If)630 3393 y(`)p Ft(else)29 b Fj
+(alternate-consequents)p Fu(')c(is)30 b(presen)m(t,)h(and)f(the)g
+(\014nal)g(command)g(in)g(the)g(\014nal)630 3503 y Ft(if)44
+b Fu(or)g Ft(elif)f Fu(clause)i(has)f(a)h(non-zero)g(exit)g(status,)j
+(then)c Fr(alternate-consequen)m(ts)51 b Fu(is)630 3612
+y(executed.)k(The)34 b(return)g(status)h(is)f(the)h(exit)h(status)f(of)
+g(the)g(last)g(command)g(executed,)630 3722 y(or)30 b(zero)i(if)e(no)g
+(condition)h(tested)g(true.)150 3865 y Ft(case)288 b
+Fu(The)30 b(syn)m(tax)h(of)f(the)h Ft(case)e Fu(command)h(is:)870
+3991 y Ft(case)47 b Fj(word)f Ft(in)1061 4101 y([)h([\(])g
+Fj(pattern)f Ft([|)h Fj(pattern)p Ft(]...)m(\))h Fj(command-list)c
+Ft(;;]...)870 4211 y(esac)630 4337 y(case)20 b Fu(will)i(selectiv)m
+(ely)j(execute)e(the)e Fr(command-list)k Fu(corresp)s(onding)20
+b(to)i(the)g(\014rst)f Fr(pattern)630 4446 y Fu(that)h(matc)m(hes)h
+Fr(w)m(ord)p Fu(.)38 b(The)21 b(matc)m(h)h(is)g(p)s(erformed)e
+(according)j(to)f(the)g(rules)g(describ)s(ed)e(b)s(e-)630
+4556 y(lo)m(w)25 b(in)e(Section)i(3.5.8.1)h([P)m(attern)f(Matc)m
+(hing],)i(page)e(33.)39 b(If)23 b(the)h Ft(nocasematch)d
+Fu(shell)j(op-)630 4666 y(tion)j(\(see)g(the)f(description)g(of)g
+Ft(shopt)f Fu(in)g(Section)i(4.3.2)h([The)e(Shopt)f(Builtin],)j(page)f
+(66\))630 4775 y(is)40 b(enabled,)i(the)e(matc)m(h)h(is)e(p)s(erformed)
+g(without)g(regard)h(to)h(the)f(case)g(of)g(alphab)s(etic)630
+4885 y(c)m(haracters.)48 b(The)32 b(`)p Ft(|)p Fu(')g(is)h(used)e(to)i
+(separate)h(m)m(ultiple)f(patterns,)g(and)f(the)g(`)p
+Ft(\))p Fu(')h(op)s(erator)630 4994 y(terminates)f(a)f(pattern)g(list.)
+43 b(A)31 b(list)g(of)g(patterns)g(and)f(an)h(asso)s(ciated)h
+(command-list)g(is)630 5104 y(kno)m(wn)e(as)g(a)h Fr(clause)p
+Fu(.)630 5230 y(Eac)m(h)42 b(clause)g(m)m(ust)f(b)s(e)g(terminated)h
+(with)e(`)p Ft(;;)p Fu(',)45 b(`)p Ft(;&)p Fu(',)f(or)d(`)p
+Ft(;;&)p Fu('.)73 b(The)41 b Fr(w)m(ord)j Fu(under-)630
+5340 y(go)s(es)35 b(tilde)f(expansion,)h(parameter)g(expansion,)g
+(command)f(substitution,)h(arithmetic)p eop end
+%%Page: 12 18
+TeXDict begin 12 17 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(12)630 299
+y(expansion,)35 b(and)f(quote)g(remo)m(v)-5 b(al)36 b(\(see)f(Section)g
+(3.5.3)h([Shell)e(P)m(arameter)h(Expansion],)630 408
+y(page)22 b(25\))g(b)s(efore)f(matc)m(hing)h(is)g(attempted.)38
+b(Eac)m(h)22 b Fr(pattern)g Fu(undergo)s(es)e(tilde)i(expansion,)630
+518 y(parameter)31 b(expansion,)f(command)g(substitution,)h(and)f
+(arithmetic)h(expansion.)630 651 y(There)f(ma)m(y)g(b)s(e)f(an)h
+(arbitrary)g(n)m(um)m(b)s(er)f(of)h Ft(case)f Fu(clauses,)i(eac)m(h)g
+(terminated)g(b)m(y)e(a)i(`)p Ft(;;)p Fu(',)630 761 y(`)p
+Ft(;&)p Fu(',)c(or)e(`)p Ft(;;&)p Fu('.)39 b(The)25 b(\014rst)g
+(pattern)h(that)g(matc)m(hes)h(determines)e(the)h(command-list)g(that)
+630 870 y(is)35 b(executed.)55 b(It's)35 b(a)g(common)g(idiom)g(to)g
+(use)g(`)p Ft(*)p Fu(')g(as)g(the)g(\014nal)f(pattern)h(to)h(de\014ne)e
+(the)630 980 y(default)d(case,)g(since)g(that)g(pattern)f(will)h(alw)m
+(a)m(ys)h(matc)m(h.)630 1113 y(Here)j(is)g(an)g(example)h(using)e
+Ft(case)g Fu(in)g(a)h(script)g(that)h(could)f(b)s(e)f(used)g(to)h
+(describ)s(e)g(one)630 1223 y(in)m(teresting)d(feature)f(of)f(an)g
+(animal:)870 1356 y Ft(echo)47 b(-n)g("Enter)f(the)h(name)f(of)i(an)f
+(animal:)f(")870 1465 y(read)h(ANIMAL)870 1575 y(echo)g(-n)g("The)f
+($ANIMAL)g(has)h(")870 1684 y(case)g($ANIMAL)e(in)965
+1794 y(horse)i(|)g(dog)g(|)h(cat\))e(echo)h(-n)g("four";;)965
+1904 y(man)g(|)h(kangaroo)d(\))j(echo)e(-n)i("two";;)965
+2013 y(*\))g(echo)e(-n)h("an)g(unknown)f(number)g(of";;)870
+2123 y(esac)870 2232 y(echo)h(")g(legs.")630 2389 y Fu(If)40
+b(the)i(`)p Ft(;;)p Fu(')e(op)s(erator)i(is)f(used,)i(no)e(subsequen)m
+(t)f(matc)m(hes)i(are)f(attempted)h(after)g(the)630 2498
+y(\014rst)c(pattern)h(matc)m(h.)67 b(Using)39 b(`)p Ft(;&)p
+Fu(')g(in)f(place)i(of)f(`)p Ft(;;)p Fu(')g(causes)g(execution)h(to)g
+(con)m(tin)m(ue)630 2608 y(with)34 b(the)g Fr(command-list)j
+Fu(asso)s(ciated)f(with)e(the)h(next)f(clause,)i(if)f(an)m(y)-8
+b(.)53 b(Using)34 b(`)p Ft(;;&)p Fu(')g(in)630 2718 y(place)c(of)f(`)p
+Ft(;;)p Fu(')g(causes)h(the)f(shell)h(to)g(test)g(the)f(patterns)g(in)g
+(the)g(next)h(clause,)g(if)f(an)m(y)-8 b(,)31 b(and)630
+2827 y(execute)26 b(an)m(y)f(asso)s(ciated)h Fr(command-list)h
+Fu(on)e(a)f(successful)h(matc)m(h,)i(con)m(tin)m(uing)e(the)g(case)630
+2937 y(statemen)m(t)32 b(execution)g(as)e(if)h(the)f(pattern)h(list)g
+(had)f(not)g(matc)m(hed.)630 3070 y(The)c(return)f(status)h(is)g(zero)h
+(if)f(no)g Fr(pattern)g Fu(is)g(matc)m(hed.)40 b(Otherwise,)27
+b(the)g(return)e(status)630 3180 y(is)30 b(the)h(exit)g(status)g(of)f
+(the)h Fr(command-list)i Fu(executed.)150 3336 y Ft(select)630
+3469 y Fu(The)g Ft(select)f Fu(construct)i(allo)m(ws)h(the)f(easy)g
+(generation)h(of)e(men)m(us.)50 b(It)34 b(has)f(almost)i(the)630
+3579 y(same)c(syn)m(tax)g(as)f(the)h Ft(for)e Fu(command:)870
+3712 y Ft(select)46 b Fj(name)h Ft([in)g Fj(words)f Ft(...)o(];)h(do)h
+Fj(commands)p Ft(;)d(done)630 3845 y Fu(The)25 b(list)h(of)f(w)m(ords)g
+(follo)m(wing)i Ft(in)d Fu(is)h(expanded,)h(generating)h(a)e(list)h(of)
+g(items.)39 b(The)25 b(set)h(of)630 3954 y(expanded)i(w)m(ords)h(is)g
+(prin)m(ted)f(on)h(the)g(standard)f(error)h(output)f(stream,)i(eac)m(h)
+g(preceded)630 4064 y(b)m(y)21 b(a)g(n)m(um)m(b)s(er.)37
+b(If)20 b(the)i(`)p Ft(in)30 b Fj(words)p Fu(')20 b(is)h(omitted,)j
+(the)d(p)s(ositional)h(parameters)g(are)f(prin)m(ted,)630
+4174 y(as)28 b(if)f(`)p Ft(in)j("$@")p Fu(')d(had)f(b)s(een)h(sp)s
+(eci\014ed.)39 b(The)27 b Ft(PS3)g Fu(prompt)f(is)i(then)f(displa)m(y)m
+(ed)h(and)f(a)h(line)630 4283 y(is)h(read)f(from)h(the)f(standard)g
+(input.)39 b(If)29 b(the)g(line)g(consists)g(of)g(a)g(n)m(um)m(b)s(er)e
+(corresp)s(onding)630 4393 y(to)36 b(one)f(of)h(the)f(displa)m(y)m(ed)h
+(w)m(ords,)g(then)f(the)g(v)-5 b(alue)36 b(of)f Fr(name)40
+b Fu(is)35 b(set)h(to)g(that)g(w)m(ord.)54 b(If)630 4502
+y(the)37 b(line)h(is)f(empt)m(y)-8 b(,)39 b(the)e(w)m(ords)g(and)f
+(prompt)g(are)i(displa)m(y)m(ed)f(again.)62 b(If)37 b
+Ft(EOF)f Fu(is)h(read,)630 4612 y(the)c Ft(select)e Fu(command)i
+(completes.)50 b(An)m(y)33 b(other)g(v)-5 b(alue)33 b(read)g(causes)g
+Fr(name)38 b Fu(to)c(b)s(e)e(set)630 4722 y(to)f(n)m(ull.)41
+b(The)30 b(line)g(read)h(is)f(sa)m(v)m(ed)h(in)g(the)f(v)-5
+b(ariable)31 b Ft(REPLY)p Fu(.)630 4855 y(The)42 b Fr(commands)j
+Fu(are)d(executed)h(after)g(eac)m(h)g(selection)h(un)m(til)e(a)h
+Ft(break)d Fu(command)i(is)630 4964 y(executed,)32 b(at)f(whic)m(h)f(p)
+s(oin)m(t)g(the)h Ft(select)d Fu(command)i(completes.)630
+5097 y(Here)39 b(is)g(an)g(example)h(that)f(allo)m(ws)i(the)e(user)f
+(to)i(pic)m(k)f(a)g(\014lename)h(from)e(the)h(curren)m(t)630
+5207 y(directory)-8 b(,)32 b(and)d(displa)m(ys)i(the)f(name)h(and)f
+(index)f(of)i(the)g(\014le)f(selected.)870 5340 y Ft(select)46
+b(fname)g(in)i(*;)p eop end
+%%Page: 13 19
+TeXDict begin 13 18 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(13)870 299
+y Ft(do)870 408 y(echo)47 b(you)g(picked)f($fname)g(\\\($REPLY\\\))870
+518 y(break;)870 628 y(done)150 788 y(\(\(...)o(\)\))870
+923 y(\(\()h Fj(expression)e Ft(\)\))630 1058 y Fu(The)33
+b(arithmetic)i Fr(expression)f Fu(is)f(ev)-5 b(aluated)35
+b(according)g(to)f(the)g(rules)f(describ)s(ed)g(b)s(elo)m(w)630
+1167 y(\(see)j(Section)f(6.5)h([Shell)f(Arithmetic],)i(page)f(93\).)55
+b(If)34 b(the)h(v)-5 b(alue)35 b(of)g(the)g(expression)g(is)630
+1277 y(non-zero,)27 b(the)f(return)e(status)i(is)g(0;)h(otherwise)f
+(the)g(return)e(status)i(is)g(1.)39 b(This)25 b(is)g(exactly)630
+1386 y(equiv)-5 b(alen)m(t)32 b(to)870 1521 y Ft(let)47
+b(")p Fj(expression)p Ft(")630 1656 y Fu(See)25 b(Section)h(4.2)h
+([Bash)e(Builtins],)i(page)f(51,)i(for)c(a)i(full)f(description)g(of)g
+(the)h Ft(let)e Fu(builtin.)150 1816 y Ft([[...)o(]])870
+1951 y([[)47 b Fj(expression)e Ft(]])630 2086 y Fu(Return)25
+b(a)h(status)f(of)h(0)g(or)g(1)g(dep)s(ending)e(on)h(the)h(ev)-5
+b(aluation)27 b(of)e(the)h(conditional)h(expres-)630
+2196 y(sion)j Fr(expression)p Fu(.)41 b(Expressions)29
+b(are)i(comp)s(osed)f(of)g(the)h(primaries)f(describ)s(ed)f(b)s(elo)m
+(w)h(in)630 2305 y(Section)36 b(6.4)h([Bash)f(Conditional)g
+(Expressions],)h(page)f(91.)57 b(W)-8 b(ord)36 b(splitting)h(and)e
+(\014le-)630 2415 y(name)d(expansion)g(are)h(not)g(p)s(erformed)d(on)j
+(the)f(w)m(ords)g(b)s(et)m(w)m(een)h(the)f Ft([[)g Fu(and)f
+Ft(]])p Fu(;)i(tilde)630 2524 y(expansion,)e(parameter)g(and)f(v)-5
+b(ariable)31 b(expansion,)g(arithmetic)g(expansion,)g(command)630
+2634 y(substitution,)40 b(pro)s(cess)f(substitution,)h(and)e(quote)h
+(remo)m(v)-5 b(al)40 b(are)f(p)s(erformed.)63 b(Condi-)630
+2744 y(tional)32 b(op)s(erators)e(suc)m(h)g(as)h(`)p
+Ft(-f)p Fu(')f(m)m(ust)g(b)s(e)g(unquoted)g(to)h(b)s(e)e(recognized)j
+(as)f(primaries.)630 2878 y(When)k(used)f(with)h Ft([[)p
+Fu(,)h(the)f(`)p Ft(<)p Fu(')g(and)g(`)p Ft(>)p Fu(')g(op)s(erators)g
+(sort)g(lexicographically)j(using)d(the)630 2988 y(curren)m(t)30
+b(lo)s(cale.)630 3123 y(When)22 b(the)h(`)p Ft(==)p Fu(')f(and)g(`)p
+Ft(!=)p Fu(')g(op)s(erators)h(are)g(used,)g(the)g(string)f(to)i(the)e
+(righ)m(t)h(of)g(the)g(op)s(erator)630 3232 y(is)31 b(considered)g(a)h
+(pattern)f(and)g(matc)m(hed)h(according)g(to)g(the)g(rules)f(describ)s
+(ed)f(b)s(elo)m(w)h(in)630 3342 y(Section)d(3.5.8.1)h([P)m(attern)f
+(Matc)m(hing],)h(page)f(33,)g(as)f(if)g(the)g Ft(extglob)d
+Fu(shell)j(option)g(w)m(ere)630 3452 y(enabled.)46 b(The)31
+b(`)p Ft(=)p Fu(')h(op)s(erator)h(is)f(iden)m(tical)h(to)g(`)p
+Ft(==)p Fu('.)46 b(If)31 b(the)h Ft(nocasematch)d Fu(shell)j(option)630
+3561 y(\(see)42 b(the)f(description)g(of)h Ft(shopt)d
+Fu(in)i(Section)h(4.3.2)h([The)e(Shopt)f(Builtin],)45
+b(page)d(66\))630 3671 y(is)e(enabled,)i(the)e(matc)m(h)h(is)e(p)s
+(erformed)g(without)g(regard)h(to)h(the)f(case)g(of)g(alphab)s(etic)630
+3780 y(c)m(haracters.)h(The)28 b(return)e(v)-5 b(alue)28
+b(is)g(0)g(if)g(the)g(string)g(matc)m(hes)h(\(`)p Ft(==)p
+Fu('\))f(or)g(do)s(es)f(not)h(matc)m(h)630 3890 y(\(`)p
+Ft(!=)p Fu('\))j(the)f(pattern,)h(and)e(1)i(otherwise.)41
+b(An)m(y)30 b(part)g(of)h(the)f(pattern)g(ma)m(y)h(b)s(e)f(quoted)g(to)
+630 4000 y(force)h(the)g(quoted)f(p)s(ortion)g(to)h(b)s(e)f(matc)m(hed)
+h(as)g(a)f(string.)630 4134 y(An)44 b(additional)h(binary)f(op)s
+(erator,)49 b(`)p Ft(=~)p Fu(',)f(is)c(a)m(v)-5 b(ailable,)51
+b(with)44 b(the)h(same)f(precedence)630 4244 y(as)c(`)p
+Ft(==)p Fu(')g(and)f(`)p Ft(!=)p Fu('.)69 b(When)40 b(it)g(is)g(used,)i
+(the)e(string)g(to)g(the)g(righ)m(t)h(of)f(the)g(op)s(erator)g(is)630
+4354 y(considered)23 b(a)g Fm(posix)g Fu(extended)g(regular)g
+(expression)g(and)f(matc)m(hed)i(accordingly)g(\(using)630
+4463 y(the)29 b Fm(posix)g Ft(regcomp)e Fu(and)h Ft(regexec)g
+Fu(in)m(terfaces)i(usually)f(describ)s(ed)f(in)h Fl(r)-5
+b(e)g(gex)11 b Fu(\(3\)\).)42 b(The)630 4573 y(return)20
+b(v)-5 b(alue)21 b(is)g(0)g(if)g(the)g(string)g(matc)m(hes)h(the)f
+(pattern,)j(and)c(1)h(otherwise.)38 b(If)21 b(the)g(regular)630
+4682 y(expression)k(is)h(syn)m(tactically)i(incorrect,)g(the)e
+(conditional)h(expression's)e(return)g(v)-5 b(alue)26
+b(is)630 4792 y(2.)39 b(If)24 b(the)h Ft(nocasematch)c
+Fu(shell)k(option)g(\(see)h(the)e(description)h(of)g
+Ft(shopt)e Fu(in)h(Section)h(4.3.2)630 4902 y([The)e(Shopt)g(Builtin],)
+j(page)e(66\))h(is)e(enabled,)i(the)f(matc)m(h)g(is)g(p)s(erformed)e
+(without)h(regard)630 5011 y(to)36 b(the)g(case)h(of)f(alphab)s(etic)g
+(c)m(haracters.)58 b(An)m(y)36 b(part)g(of)g(the)g(pattern)f(ma)m(y)i
+(b)s(e)e(quoted)630 5121 y(to)f(force)g(the)f(quoted)h(p)s(ortion)f(to)
+h(b)s(e)f(matc)m(hed)h(as)f(a)h(string.)50 b(Brac)m(k)m(et)35
+b(expressions)e(in)630 5230 y(regular)g(expressions)g(m)m(ust)g(b)s(e)f
+(treated)i(carefully)-8 b(,)35 b(since)e(normal)g(quoting)g(c)m
+(haracters)630 5340 y(lose)25 b(their)f(meanings)g(b)s(et)m(w)m(een)h
+(brac)m(k)m(ets.)40 b(If)23 b(the)h(pattern)h(is)f(stored)g(in)f(a)i
+(shell)f(v)-5 b(ariable,)p eop end
+%%Page: 14 20
+TeXDict begin 14 19 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(14)630 299
+y(quoting)41 b(the)f(v)-5 b(ariable)42 b(expansion)e(forces)h(the)f(en)
+m(tire)h(pattern)g(to)g(b)s(e)f(matc)m(hed)h(as)g(a)630
+408 y(string.)630 555 y(The)26 b(pattern)g(will)h(matc)m(h)g(if)f(it)h
+(matc)m(hes)h(an)m(y)e(part)h(of)f(the)h(string.)39 b(Anc)m(hor)26
+b(the)h(pattern)630 664 y(using)f(the)i(`)p Ft(^)p Fu(')f(and)f(`)p
+Ft($)p Fu(')h(regular)h(expression)e(op)s(erators)h(to)h(force)g(it)f
+(to)h(matc)m(h)g(the)f(en)m(tire)630 774 y(string.)81
+b(The)44 b(arra)m(y)g(v)-5 b(ariable)45 b Ft(BASH_REMATCH)40
+b Fu(records)k(whic)m(h)f(parts)h(of)g(the)g(string)630
+883 y(matc)m(hed)31 b(the)f(pattern.)41 b(The)30 b(elemen)m(t)i(of)e
+Ft(BASH_REMATCH)d Fu(with)j(index)g(0)g(con)m(tains)i(the)630
+993 y(p)s(ortion)20 b(of)h(the)g(string)f(matc)m(hing)i(the)f(en)m
+(tire)g(regular)g(expression.)37 b(Substrings)19 b(matc)m(hed)630
+1103 y(b)m(y)30 b(paren)m(thesized)g(sub)s(expressions)e(within)i(the)g
+(regular)g(expression)g(are)g(sa)m(v)m(ed)h(in)f(the)630
+1212 y(remaining)j Ft(BASH_REMATCH)c Fu(indices.)49 b(The)32
+b(elemen)m(t)i(of)f Ft(BASH_REMATCH)d Fu(with)i(index)g
+Fr(n)630 1322 y Fu(is)e(the)h(p)s(ortion)f(of)g(the)h(string)f(matc)m
+(hing)i(the)e Fr(n)p Fu(th)g(paren)m(thesized)h(sub)s(expression.)630
+1468 y(F)-8 b(or)34 b(example,)h(the)e(follo)m(wing)i(will)f(matc)m(h)g
+(a)g(line)f(\(stored)h(in)f(the)h(shell)f(v)-5 b(ariable)34
+b Fr(line)5 b Fu(\))630 1577 y(if)42 b(there)h(is)g(a)f(sequence)h(of)g
+(c)m(haracters)h(an)m(ywhere)e(in)g(the)h(v)-5 b(alue)43
+b(consisting)g(of)g(an)m(y)630 1687 y(n)m(um)m(b)s(er,)30
+b(including)h(zero,)h(of)f(c)m(haracters)i(in)e(the)g
+Ft(space)f Fu(c)m(haracter)i(class,)h(zero)f(or)f(one)630
+1797 y(instances)g(of)f(`)p Ft(a)p Fu(',)h(then)f(a)h(`)p
+Ft(b)p Fu(':)870 1943 y Ft([[)47 b($line)g(=~)g([[:space:]]*\(a\)?b)c
+(]])630 2089 y Fu(That)24 b(means)g(v)-5 b(alues)24 b(lik)m(e)h(`)p
+Ft(aab)p Fu(')e(and)h(`)30 b Ft(aaaaaab)p Fu(')22 b(will)i(matc)m(h,)j
+(as)d(will)g(a)g(line)g(con)m(taining)630 2198 y(a)31
+b(`)p Ft(b)p Fu(')f(an)m(ywhere)h(in)f(its)g(v)-5 b(alue.)630
+2345 y(Storing)31 b(the)g(regular)g(expression)f(in)h(a)g(shell)g(v)-5
+b(ariable)31 b(is)g(often)g(a)g(useful)f(w)m(a)m(y)i(to)f(a)m(v)m(oid)
+630 2454 y(problems)f(with)g(quoting)h(c)m(haracters)i(that)e(are)g(sp)
+s(ecial)g(to)h(the)f(shell.)41 b(It)31 b(is)g(sometimes)630
+2564 y(di\016cult)24 b(to)h(sp)s(ecify)f(a)h(regular)g(expression)f
+(literally)i(without)f(using)e(quotes,)k(or)d(to)h(k)m(eep)630
+2673 y(trac)m(k)33 b(of)g(the)f(quoting)g(used)g(b)m(y)g(regular)g
+(expressions)g(while)g(pa)m(ying)h(atten)m(tion)h(to)f(the)630
+2783 y(shell's)25 b(quote)g(remo)m(v)-5 b(al.)40 b(Using)25
+b(a)g(shell)g(v)-5 b(ariable)26 b(to)f(store)g(the)g(pattern)g
+(decreases)g(these)630 2892 y(problems.)40 b(F)-8 b(or)31
+b(example,)g(the)g(follo)m(wing)h(is)e(equiv)-5 b(alen)m(t)32
+b(to)f(the)g(ab)s(o)m(v)m(e:)870 3039 y Ft(pattern='[[:space:]]*\(a\))o
+(?b')870 3148 y([[)47 b($line)g(=~)g($pattern)e(]])630
+3294 y Fu(If)28 b(y)m(ou)h(w)m(an)m(t)g(to)g(matc)m(h)h(a)e(c)m
+(haracter)j(that's)e(sp)s(ecial)g(to)g(the)g(regular)f(expression)g
+(gram-)630 3404 y(mar,)g(it)g(has)g(to)g(b)s(e)f(quoted)h(to)g(remo)m
+(v)m(e)h(its)f(sp)s(ecial)g(meaning.)40 b(This)27 b(means)g(that)h(in)g
+(the)630 3513 y(pattern)e(`)p Ft(xxx.txt)p Fu(',)g(the)h(`)p
+Ft(.)p Fu(')f(matc)m(hes)i(an)m(y)e(c)m(haracter)i(in)e(the)h(string)f
+(\(its)h(usual)f(regular)630 3623 y(expression)g(meaning\),)i(but)e(in)
+g(the)h(pattern)f(`)p Ft("xxx.txt")p Fu(')f(it)i(can)g(only)f(matc)m(h)
+i(a)e(literal)630 3733 y(`)p Ft(.)p Fu('.)56 b(Shell)35
+b(programmers)f(should)h(tak)m(e)i(sp)s(ecial)e(care)i(with)e(bac)m
+(kslashes,)i(since)f(bac)m(k-)630 3842 y(slashes)27 b(are)g(used)f(b)s
+(oth)g(b)m(y)h(the)f(shell)h(and)f(regular)h(expressions)g(to)g(remo)m
+(v)m(e)h(the)f(sp)s(ecial)630 3952 y(meaning)h(from)f(the)h(follo)m
+(wing)i(c)m(haracter.)41 b(The)27 b(follo)m(wing)j(t)m(w)m(o)f(sets)f
+(of)g(commands)g(are)630 4061 y Fl(not)40 b Fu(equiv)-5
+b(alen)m(t:)870 4208 y Ft(pattern='\\.')870 4427 y([[)47
+b(.)h(=~)f($pattern)e(]])870 4536 y([[)i(.)h(=~)f(\\.)g(]])870
+4756 y([[)g(.)h(=~)f("$pattern")e(]])870 4865 y([[)i(.)h(=~)f('\\.')f
+(]])630 5011 y Fu(The)28 b(\014rst)h(t)m(w)m(o)h(matc)m(hes)g(will)f
+(succeed,)h(but)f(the)g(second)g(t)m(w)m(o)h(will)f(not,)h(b)s(ecause)f
+(in)g(the)630 5121 y(second)39 b(t)m(w)m(o)i(the)e(bac)m(kslash)h(will)
+f(b)s(e)g(part)g(of)g(the)h(pattern)f(to)h(b)s(e)e(matc)m(hed.)68
+b(In)39 b(the)630 5230 y(\014rst)31 b(t)m(w)m(o)h(examples,)h(the)e
+(bac)m(kslash)h(remo)m(v)m(es)h(the)f(sp)s(ecial)g(meaning)f(from)g(`)p
+Ft(.)p Fu(',)h(so)g(the)630 5340 y(literal)f(`)p Ft(.)p
+Fu(')e(matc)m(hes.)42 b(If)28 b(the)i(string)f(in)g(the)g(\014rst)g
+(examples)g(w)m(ere)h(an)m(ything)g(other)f(than)p eop
+end
+%%Page: 15 21
+TeXDict begin 15 20 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(15)630 299
+y(`)p Ft(.)p Fu(',)29 b(sa)m(y)g(`)p Ft(a)p Fu(',)g(the)f(pattern)g(w)m
+(ould)g(not)h(matc)m(h,)h(b)s(ecause)e(the)g(quoted)g(`)p
+Ft(.)p Fu(')h(in)e(the)i(pattern)630 408 y(loses)i(its)g(sp)s(ecial)g
+(meaning)f(of)h(matc)m(hing)g(an)m(y)g(single)g(c)m(haracter.)630
+542 y(Expressions)23 b(ma)m(y)h(b)s(e)e(com)m(bined)i(using)f(the)h
+(follo)m(wing)h(op)s(erators,)g(listed)f(in)f(decreasing)630
+651 y(order)30 b(of)g(precedence:)630 808 y Ft(\()g Fj(expression)e
+Ft(\))1110 918 y Fu(Returns)i(the)h(v)-5 b(alue)31 b(of)g
+Fr(expression)p Fu(.)42 b(This)30 b(ma)m(y)i(b)s(e)e(used)g(to)i(o)m(v)
+m(erride)g(the)1110 1027 y(normal)e(precedence)h(of)g(op)s(erators.)630
+1184 y Ft(!)f Fj(expression)1110 1293 y Fu(T)-8 b(rue)30
+b(if)g Fr(expression)g Fu(is)h(false.)630 1450 y Fj(expression1)c
+Ft(&&)j Fj(expression2)1110 1560 y Fu(T)-8 b(rue)30 b(if)g(b)s(oth)g
+Fr(expression1)38 b Fu(and)29 b Fr(expression2)38 b Fu(are)31
+b(true.)630 1716 y Fj(expression1)c Ft(||)j Fj(expression2)1110
+1826 y Fu(T)-8 b(rue)30 b(if)g(either)h Fr(expression1)38
+b Fu(or)30 b Fr(expression2)38 b Fu(is)30 b(true.)630
+1983 y(The)24 b Ft(&&)h Fu(and)f Ft(||)g Fu(op)s(erators)h(do)g(not)g
+(ev)-5 b(aluate)27 b Fr(expression2)32 b Fu(if)25 b(the)g(v)-5
+b(alue)25 b(of)g Fr(expression1)630 2092 y Fu(is)30 b(su\016cien)m(t)h
+(to)g(determine)g(the)f(return)g(v)-5 b(alue)31 b(of)f(the)h(en)m(tire)
+g(conditional)h(expression.)150 2289 y Fk(3.2.5.3)63
+b(Grouping)43 b(Commands)150 2436 y Fu(Bash)30 b(pro)m(vides)g(t)m(w)m
+(o)h(w)m(a)m(ys)f(to)h(group)e(a)h(list)g(of)g(commands)f(to)i(b)s(e)e
+(executed)h(as)g(a)h(unit.)40 b(When)29 b(com-)150 2545
+y(mands)h(are)i(group)s(ed,)f(redirections)h(ma)m(y)g(b)s(e)e(applied)i
+(to)g(the)f(en)m(tire)h(command)g(list.)44 b(F)-8 b(or)32
+b(example,)150 2655 y(the)f(output)f(of)g(all)h(the)g(commands)f(in)g
+(the)h(list)g(ma)m(y)g(b)s(e)e(redirected)i(to)g(a)g(single)g(stream.)
+150 2812 y Ft(\(\))870 2945 y(\()47 b Fj(list)g Ft(\))630
+3078 y Fu(Placing)30 b(a)f(list)g(of)g(commands)f(b)s(et)m(w)m(een)i
+(paren)m(theses)e(causes)i(a)f(subshell)e(en)m(vironmen)m(t)630
+3188 y(to)k(b)s(e)e(created)j(\(see)f(Section)g(3.7.3)h([Command)d
+(Execution)i(En)m(vironmen)m(t],)g(page)f(40\),)630 3297
+y(and)d(eac)m(h)h(of)g(the)f(commands)g(in)g Fr(list)j
+Fu(to)f(b)s(e)d(executed)j(in)e(that)h(subshell.)38 b(Since)28
+b(the)f Fr(list)630 3407 y Fu(is)i(executed)g(in)f(a)h(subshell,)g(v)-5
+b(ariable)29 b(assignmen)m(ts)g(do)g(not)g(remain)f(in)g(e\013ect)j
+(after)e(the)630 3516 y(subshell)g(completes.)150 3673
+y Ft({})870 3806 y({)47 b Fj(list)p Ft(;)g(})630 3939
+y Fu(Placing)30 b(a)g(list)g(of)g(commands)f(b)s(et)m(w)m(een)h(curly)f
+(braces)g(causes)h(the)f(list)h(to)g(b)s(e)f(executed)630
+4049 y(in)d(the)h(curren)m(t)g(shell)f(con)m(text.)42
+b(No)27 b(subshell)f(is)g(created.)41 b(The)26 b(semicolon)i(\(or)f
+(newline\))630 4159 y(follo)m(wing)32 b Fr(list)h Fu(is)d(required.)275
+4315 y(In)44 b(addition)h(to)h(the)f(creation)i(of)e(a)g(subshell,)j
+(there)e(is)f(a)g(subtle)g(di\013erence)h(b)s(et)m(w)m(een)f(these)150
+4425 y(t)m(w)m(o)c(constructs)e(due)g(to)g(historical)i(reasons.)67
+b(The)39 b(braces)g(are)h Ft(reserved)28 b(words)p Fu(,)40
+b(so)g(they)f(m)m(ust)150 4535 y(b)s(e)d(separated)h(from)f(the)g
+Fr(list)j Fu(b)m(y)e Ft(blank)p Fu(s)e(or)h(other)h(shell)f(metac)m
+(haracters.)62 b(The)36 b(paren)m(theses)h(are)150 4644
+y Ft(operators)p Fu(,)23 b(and)h(are)g(recognized)i(as)e(separate)i
+(tok)m(ens)f(b)m(y)f(the)g(shell)h(ev)m(en)g(if)f(they)g(are)h(not)f
+(separated)150 4754 y(from)30 b(the)g Fr(list)j Fu(b)m(y)e(whitespace.)
+275 4887 y(The)e(exit)j(status)e(of)h(b)s(oth)f(of)g(these)h
+(constructs)g(is)f(the)h(exit)g(status)f(of)h Fr(list)p
+Fu(.)150 5083 y Fk(3.2.6)63 b(Copro)s(cesses)150 5230
+y Fu(A)37 b Ft(coprocess)c Fu(is)k(a)g(shell)f(command)h(preceded)f(b)m
+(y)g(the)h Ft(coproc)d Fu(reserv)m(ed)j(w)m(ord.)59 b(A)36
+b(copro)s(cess)h(is)150 5340 y(executed)g(async)m(hronously)g(in)f(a)h
+(subshell,)g(as)g(if)g(the)f(command)h(had)f(b)s(een)f(terminated)i
+(with)g(the)p eop end
+%%Page: 16 22
+TeXDict begin 16 21 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(16)150 299
+y(`)p Ft(&)p Fu(')34 b(con)m(trol)h(op)s(erator,)g(with)f(a)g(t)m(w)m
+(o-w)m(a)m(y)i(pip)s(e)d(established)h(b)s(et)m(w)m(een)h(the)f
+(executing)h(shell)f(and)f(the)150 408 y(copro)s(cess.)275
+550 y(The)c(format)i(for)f(a)h(copro)s(cess)g(is:)390
+691 y Ft(coproc)46 b([)p Fj(NAME)p Ft(])g Fj(command)g
+Ft([)p Fj(redirections)p Ft(])150 833 y Fu(This)39 b(creates)j(a)e
+(copro)s(cess)h(named)f Fr(NAME)p Fu(.)70 b(If)40 b Fr(NAME)46
+b Fu(is)40 b(not)g(supplied,)i(the)e(default)h(name)f(is)150
+942 y Fr(COPR)m(OC)p Fu(.)d Fr(NAME)28 b Fu(m)m(ust)23
+b(not)g(b)s(e)e(supplied)h(if)g Fr(command)k Fu(is)d(a)g(simple)f
+(command)g(\(see)i(Section)f(3.2.2)150 1052 y([Simple)39
+b(Commands],)h(page)g(8\);)k(otherwise,)e(it)d(is)g(in)m(terpreted)h
+(as)f(the)g(\014rst)f(w)m(ord)h(of)g(the)g(simple)150
+1162 y(command.)275 1303 y(When)j(the)i(copro)s(cess)f(is)g(executed,)
+48 b(the)43 b(shell)g(creates)i(an)e(arra)m(y)g(v)-5
+b(ariable)44 b(\(see)g(Section)g(6.7)150 1413 y([Arra)m(ys],)32
+b(page)g(95\))h(named)e Ft(NAME)f Fu(in)h(the)h(con)m(text)h(of)e(the)h
+(executing)g(shell.)44 b(The)31 b(standard)f(output)150
+1522 y(of)39 b Fr(command)j Fu(is)d(connected)g(via)g(a)g(pip)s(e)f(to)
+i(a)f(\014le)f(descriptor)h(in)f(the)h(executing)h(shell,)h(and)d(that)
+150 1632 y(\014le)i(descriptor)h(is)f(assigned)h(to)g
+Ft(NAME)p Fu([0].)70 b(The)40 b(standard)f(input)h(of)g
+Fr(command)k Fu(is)c(connected)h(via)150 1741 y(a)h(pip)s(e)f(to)i(a)f
+(\014le)g(descriptor)g(in)f(the)h(executing)i(shell,)h(and)c(that)h
+(\014le)g(descriptor)g(is)g(assigned)g(to)150 1851 y
+Ft(NAME)p Fu([1].)69 b(This)39 b(pip)s(e)g(is)h(established)g(b)s
+(efore)f(an)m(y)h(redirections)h(sp)s(eci\014ed)e(b)m(y)g(the)h
+(command)g(\(see)150 1961 y(Section)45 b(3.6)h([Redirections],)k(page)
+45 b(35\).)84 b(The)44 b(\014le)h(descriptors)f(can)h(b)s(e)f(utilized)
+h(as)g(argumen)m(ts)150 2070 y(to)d(shell)g(commands)f(and)g
+(redirections)h(using)f(standard)g(w)m(ord)g(expansions.)74
+b(Other)41 b(than)g(those)150 2180 y(created)27 b(to)g(execute)g
+(command)f(and)f(pro)s(cess)h(substitutions,)h(the)f(\014le)g
+(descriptors)g(are)g(not)h(a)m(v)-5 b(ailable)150 2289
+y(in)30 b(subshells.)275 2431 y(The)d(pro)s(cess)h(ID)h(of)f(the)h
+(shell)f(spa)m(wned)g(to)h(execute)h(the)e(copro)s(cess)h(is)f(a)m(v)-5
+b(ailable)31 b(as)d(the)h(v)-5 b(alue)29 b(of)150 2540
+y(the)k(v)-5 b(ariable)33 b Ft(NAME)p 850 2540 28 4 v
+39 w Fu(PID.)g(The)f Ft(wait)f Fu(builtin)h(command)g(ma)m(y)h(b)s(e)f
+(used)g(to)h(w)m(ait)h(for)e(the)h(copro)s(cess)150 2650
+y(to)e(terminate.)275 2791 y(Since)20 b(the)g(copro)s(cess)h(is)g
+(created)g(as)g(an)f(async)m(hronous)g(command,)i(the)f
+Ft(coproc)d Fu(command)i(alw)m(a)m(ys)150 2901 y(returns)29
+b(success.)41 b(The)30 b(return)f(status)i(of)f(a)h(copro)s(cess)g(is)f
+(the)h(exit)g(status)g(of)f Fr(command)p Fu(.)150 3107
+y Fk(3.2.7)63 b(GNU)41 b(P)m(arallel)150 3254 y Fu(There)30
+b(are)h(w)m(a)m(ys)g(to)g(run)f(commands)g(in)g(parallel)h(that)h(are)e
+(not)h(built)g(in)m(to)g(Bash.)41 b(GNU)31 b(P)m(arallel)i(is)150
+3364 y(a)e(to)s(ol)g(to)g(do)f(just)g(that.)275 3505
+y(GNU)e(P)m(arallel,)i(as)e(its)g(name)f(suggests,)j(can)d(b)s(e)g
+(used)g(to)h(build)f(and)g(run)f(commands)h(in)h(parallel.)150
+3615 y(Y)-8 b(ou)41 b(ma)m(y)g(run)e(the)h(same)h(command)f(with)g
+(di\013eren)m(t)h(argumen)m(ts,)j(whether)39 b(they)i(are)g
+(\014lenames,)150 3724 y(usernames,)27 b(hostnames,)h(or)e(lines)h
+(read)f(from)h(\014les.)39 b(GNU)27 b(P)m(arallel)i(pro)m(vides)d
+(shorthand)g(references)150 3834 y(to)38 b(man)m(y)g(of)g(the)g(most)g
+(common)g(op)s(erations)g(\(input)f(lines,)j(v)-5 b(arious)38
+b(p)s(ortions)f(of)h(the)g(input)e(line,)150 3943 y(di\013eren)m(t)f(w)
+m(a)m(ys)h(to)f(sp)s(ecify)f(the)h(input)f(source,)i(and)e(so)h(on\).)
+54 b(P)m(arallel)36 b(can)f(replace)h Ft(xargs)d Fu(or)i(feed)150
+4053 y(commands)30 b(from)g(its)h(input)e(sources)h(to)i(sev)m(eral)f
+(di\013eren)m(t)g(instances)g(of)g(Bash.)275 4194 y(F)-8
+b(or)33 b(a)g(complete)h(description,)g(refer)e(to)i(the)f(GNU)g(P)m
+(arallel)i(do)s(cumen)m(tation.)48 b(A)33 b(few)f(examples)150
+4304 y(should)d(pro)m(vide)i(a)g(brief)e(in)m(tro)s(duction)i(to)g(its)
+g(use.)275 4445 y(F)-8 b(or)37 b(example,)i(it)e(is)f(easy)h(to)g
+(replace)h Ft(xargs)d Fu(to)i(gzip)g(all)g(h)m(tml)g(\014les)f(in)h
+(the)f(curren)m(t)g(directory)150 4555 y(and)30 b(its)h(sub)s
+(directories:)390 4696 y Ft(find)47 b(.)g(-type)f(f)i(-name)e('*.html')
+g(-print)g(|)h(parallel)f(gzip)150 4838 y Fu(If)30 b(y)m(ou)h(need)f
+(to)h(protect)h(sp)s(ecial)f(c)m(haracters)g(suc)m(h)g(as)f(newlines)h
+(in)f(\014le)g(names,)h(use)f(\014nd's)f Ft(-print0)150
+4948 y Fu(option)i(and)f(parallel's)h Ft(-0)f Fu(option.)275
+5089 y(Y)-8 b(ou)34 b(can)g(use)f(P)m(arallel)j(to)e(mo)m(v)m(e)h
+(\014les)f(from)f(the)h(curren)m(t)f(directory)h(when)f(the)h(n)m(um)m
+(b)s(er)e(of)i(\014les)150 5199 y(is)c(to)s(o)i(large)f(to)g(pro)s
+(cess)f(with)g(one)h Ft(mv)f Fu(in)m(v)m(o)s(cation:)390
+5340 y Ft(printf)46 b('\045s\\n')g(*)i(|)f(parallel)f(mv)h({})g
+(destdir)p eop end
+%%Page: 17 23
+TeXDict begin 17 22 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(17)275 299
+y(As)28 b(y)m(ou)h(can)g(see,)g(the)g Fi({})g Fu(is)g(replaced)g(with)f
+(eac)m(h)i(line)f(read)f(from)g(standard)g(input.)39
+b(While)29 b(using)150 408 y Ft(ls)34 b Fu(will)i(w)m(ork)f(in)g(most)g
+(instances,)i(it)f(is)f(not)g(su\016cien)m(t)h(to)g(deal)f(with)g(all)h
+(\014lenames.)55 b Ft(printf)33 b Fu(is)j(a)150 518 y(shell)31
+b(builtin,)f(and)g(therefore)h(is)g(not)g(sub)5 b(ject)30
+b(to)h(the)g(k)m(ernel's)g(limit)g(on)g(the)g(n)m(um)m(b)s(er)e(of)i
+(argumen)m(ts)150 628 y(to)37 b(a)f(program,)h(so)g(y)m(ou)f(can)g(use)
+g(`)p Ft(*)p Fu(')g(\(but)f(see)i(b)s(elo)m(w)f(ab)s(out)g(the)g
+Ft(dotglob)e Fu(shell)i(option\).)58 b(If)36 b(y)m(ou)150
+737 y(need)30 b(to)h(accommo)s(date)h(sp)s(ecial)f(c)m(haracters)h(in)e
+(\014lenames,)h(y)m(ou)g(can)f(use)390 877 y Ft(printf)46
+b('\045s\\0')g(*)i(|)f(parallel)f(-0)h(mv)g({})g(destdir)150
+1017 y Fu(as)31 b(alluded)f(to)h(ab)s(o)m(v)m(e.)275
+1157 y(This)e(will)i(run)e(as)h(man)m(y)h Ft(mv)e Fu(commands)h(as)h
+(there)f(are)h(\014les)f(in)h(the)f(curren)m(t)g(directory)-8
+b(.)42 b(Y)-8 b(ou)31 b(can)150 1267 y(em)m(ulate)h(a)f(parallel)g
+Ft(xargs)e Fu(b)m(y)h(adding)g(the)h Ft(-X)f Fu(option:)390
+1407 y Ft(printf)46 b('\045s\\0')g(*)i(|)f(parallel)f(-0)h(-X)g(mv)g
+({})g(destdir)275 1547 y Fu(\(Y)-8 b(ou)31 b(ma)m(y)g(ha)m(v)m(e)g(to)g
+(mo)s(dify)f(the)h(pattern)f(if)g(y)m(ou)h(ha)m(v)m(e)h(the)e
+Ft(dotglob)f Fu(option)h(enabled.\))275 1687 y(GNU)h(P)m(arallel)i(can)
+e(replace)h(certain)g(common)g(idioms)f(that)g(op)s(erate)h(on)f(lines)
+g(read)g(from)f(a)i(\014le)150 1797 y(\(in)e(this)h(case,)g
+(\014lenames)g(listed)g(one)f(p)s(er)g(line\):)390 1937
+y Ft(while)46 b(IFS=)h(read)g(-r)g(x;)g(do)390 2046 y(do-something1)d
+("$x")j("config-$x")390 2156 y(do-something2)d(<)k("$x")390
+2265 y(done)f(<)g(file)g(|)g(process-output)150 2405
+y Fu(with)30 b(a)h(more)f(compact)i(syn)m(tax)f(reminiscen)m(t)g(of)g
+(lam)m(b)s(das:)390 2545 y Ft(cat)47 b(list)g(|)g(parallel)f
+("do-something1)d({})48 b(config-{})d(;)i(do-something2)e(<)i({}")g(|)
+915 2655 y(process-output)275 2795 y Fu(P)m(arallel)31
+b(pro)m(vides)e(a)h(built-in)g(mec)m(hanism)g(to)g(remo)m(v)m(e)h
+(\014lename)e(extensions,)i(whic)m(h)e(lends)g(itself)150
+2905 y(to)i(batc)m(h)g(\014le)g(transformations)f(or)g(renaming:)390
+3045 y Ft(ls)47 b(*.gz)g(|)g(parallel)f(-j+0)g("zcat)h({})g(|)g(bzip2)g
+(>{.}.bz2)e(&&)j(rm)f({}")150 3185 y Fu(This)28 b(will)i(recompress)e
+(all)i(\014les)f(in)g(the)g(curren)m(t)g(directory)g(with)g(names)g
+(ending)f(in)h(.gz)h(using)f(bzip2,)150 3294 y(running)37
+b(one)i(job)f(p)s(er)f(CPU)h(\(-j)p Ft(+)p Fu(0\))i(in)e(parallel.)66
+b(\(W)-8 b(e)40 b(use)e Ft(ls)g Fu(for)h(brevit)m(y)g(here;)j(using)c
+Ft(find)g Fu(as)150 3404 y(ab)s(o)m(v)m(e)e(is)g(more)f(robust)f(in)h
+(the)h(face)g(of)f(\014lenames)h(con)m(taining)g(unexp)s(ected)f(c)m
+(haracters.\))57 b(P)m(arallel)150 3513 y(can)31 b(tak)m(e)h(argumen)m
+(ts)e(from)g(the)h(command)f(line;)h(the)f(ab)s(o)m(v)m(e)i(can)f(also)
+g(b)s(e)f(written)g(as)390 3654 y Ft(parallel)46 b("zcat)g({})h(|)h
+(bzip2)e(>{.}.bz2)f(&&)j(rm)f({}")g(:::)g(*.gz)275 3794
+y Fu(If)24 b(a)i(command)f(generates)h(output,)g(y)m(ou)g(ma)m(y)f(w)m
+(an)m(t)h(to)g(preserv)m(e)g(the)f(input)f(order)h(in)g(the)g(output.)
+150 3903 y(F)-8 b(or)31 b(instance,)g(the)g(follo)m(wing)h(command)390
+4043 y Ft({)581 4153 y(echo)47 b(foss.org.my)d(;)581
+4262 y(echo)j(debian.org)e(;)581 4372 y(echo)i(freenetproject.org)42
+b(;)390 4482 y(})47 b(|)h(parallel)d(traceroute)150 4622
+y Fu(will)31 b(displa)m(y)f(as)h(output)f(the)g(traceroute)i(in)m(v)m
+(o)s(cation)h(that)e(\014nishes)e(\014rst.)40 b(Adding)30
+b(the)g Ft(-k)g Fu(option)390 4762 y Ft({)581 4871 y(echo)47
+b(foss.org.my)d(;)581 4981 y(echo)j(debian.org)e(;)581
+5090 y(echo)i(freenetproject.org)42 b(;)390 5200 y(})47
+b(|)h(parallel)d(-k)j(traceroute)150 5340 y Fu(will)31
+b(ensure)e(that)i(the)g(output)f(of)g Ft(traceroute)e(foss.org.my)f
+Fu(is)k(displa)m(y)m(ed)g(\014rst.)p eop end
+%%Page: 18 24
+TeXDict begin 18 23 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(18)275 299
+y(Finally)-8 b(,)31 b(P)m(arallel)h(can)e(b)s(e)f(used)g(to)i(run)d(a)i
+(sequence)h(of)f(shell)g(commands)f(in)h(parallel,)h(similar)f(to)150
+408 y(`)p Ft(cat)g(file)f(|)h(bash)p Fu('.)53 b(It)35
+b(is)g(not)g(uncommon)f(to)i(tak)m(e)g(a)f(list)h(of)f(\014lenames,)h
+(create)g(a)g(series)f(of)g(shell)150 518 y(commands)24
+b(to)h(op)s(erate)h(on)e(them,)i(and)e(feed)g(that)h(list)h(of)e
+(commands)g(to)i(a)f(shell.)39 b(P)m(arallel)26 b(can)f(sp)s(eed)150
+628 y(this)30 b(up.)40 b(Assuming)30 b(that)h Ft(file)e
+Fu(con)m(tains)i(a)g(list)g(of)g(shell)f(commands,)h(one)f(p)s(er)g
+(line,)390 772 y Ft(parallel)46 b(-j)h(10)g(<)g(file)150
+917 y Fu(will)37 b(ev)-5 b(aluate)38 b(the)f(commands)f(using)g(the)h
+(shell)g(\(since)g(no)f(explicit)i(command)e(is)h(supplied)e(as)i(an)
+150 1027 y(argumen)m(t\),)31 b(in)f(blo)s(c)m(ks)h(of)g(ten)f(shell)h
+(jobs)f(at)h(a)g(time.)150 1283 y Fs(3.3)68 b(Shell)45
+b(F)-11 b(unctions)150 1442 y Fu(Shell)35 b(functions)h(are)g(a)g(w)m
+(a)m(y)g(to)h(group)e(commands)g(for)h(later)g(execution)h(using)e(a)h
+(single)g(name)g(for)150 1552 y(the)f(group.)55 b(They)35
+b(are)g(executed)h(just)f(lik)m(e)h(a)g Ft(")p Fu(regular)p
+Ft(")f Fu(command.)54 b(When)35 b(the)h(name)f(of)g(a)h(shell)150
+1661 y(function)j(is)g(used)f(as)h(a)h(simple)f(command)g(name,)i(the)e
+(list)h(of)f(commands)g(asso)s(ciated)i(with)d(that)150
+1771 y(function)25 b(name)h(is)g(executed.)40 b(Shell)25
+b(functions)g(are)i(executed)f(in)f(the)h(curren)m(t)g(shell)g(con)m
+(text;)j(no)c(new)150 1881 y(pro)s(cess)30 b(is)g(created)i(to)f(in)m
+(terpret)g(them.)275 2025 y(F)-8 b(unctions)30 b(are)h(declared)g
+(using)f(this)g(syn)m(tax:)390 2170 y Fj(fname)46 b Ft(\(\))i
+Fj(compound-command)43 b Ft([)k Fj(redirections)e Ft(])275
+2315 y Fu(or)390 2460 y Ft(function)h Fj(fname)g Ft([\(\)])h
+Fj(compound-command)c Ft([)k Fj(redirections)e Ft(])275
+2604 y Fu(This)37 b(de\014nes)h(a)h(shell)f(function)g(named)g
+Fr(fname)p Fu(.)65 b(The)38 b(reserv)m(ed)h(w)m(ord)f
+Ft(function)e Fu(is)j(optional.)150 2714 y(If)33 b(the)g
+Ft(function)e Fu(reserv)m(ed)i(w)m(ord)g(is)g(supplied,)g(the)g(paren)m
+(theses)h(are)f(optional.)50 b(The)33 b Fr(b)s(o)s(dy)39
+b Fu(of)34 b(the)150 2824 y(function)41 b(is)h(the)g(comp)s(ound)e
+(command)h Fr(comp)s(ound-command)j Fu(\(see)e(Section)h(3.2.5)g([Comp)
+s(ound)150 2933 y(Commands],)30 b(page)h(10\).)42 b(That)30
+b(command)g(is)g(usually)h(a)f Fr(list)j Fu(enclosed)e(b)s(et)m(w)m
+(een)g Fi({)g Fu(and)f Fi(})p Fu(,)h(but)e(ma)m(y)150
+3043 y(b)s(e)39 b(an)m(y)h(comp)s(ound)e(command)i(listed)g(ab)s(o)m(v)
+m(e,)j(with)d(one)g(exception:)60 b(If)39 b(the)h Ft(function)e
+Fu(reserv)m(ed)150 3152 y(w)m(ord)g(is)g(used,)h(but)f(the)g(paren)m
+(theses)h(are)f(not)h(supplied,)g(the)f(braces)g(are)h(required.)63
+b Fr(comp)s(ound-)150 3262 y(command)37 b Fu(is)d(executed)g(whenev)m
+(er)f Fr(fname)39 b Fu(is)34 b(sp)s(eci\014ed)e(as)i(the)g(name)g(of)f
+(a)h(command.)50 b(When)34 b(the)150 3371 y(shell)e(is)f(in)g
+Fm(posix)f Fu(mo)s(de)h(\(see)i(Section)f(6.11)h([Bash)e(POSIX)g(Mo)s
+(de],)h(page)g(101\),)h Fr(fname)k Fu(m)m(ust)31 b(b)s(e)g(a)150
+3481 y(v)-5 b(alid)37 b(shell)f Fr(name)42 b Fu(and)36
+b(ma)m(y)h(not)f(b)s(e)g(the)g(same)h(as)g(one)f(of)h(the)g(sp)s(ecial)
+g(builtins)e(\(see)j(Section)f(4.4)150 3591 y([Sp)s(ecial)e(Builtins],)
+h(page)e(72\).)54 b(In)33 b(default)h(mo)s(de,)h(a)g(function)f(name)g
+(can)g(b)s(e)g(an)m(y)g(unquoted)g(shell)150 3700 y(w)m(ord)g(that)h
+(do)s(es)e(not)i(con)m(tain)g(`)p Ft($)p Fu('.)53 b(An)m(y)34
+b(redirections)h(\(see)g(Section)g(3.6)g([Redirections],)i(page)e(35\))
+150 3810 y(asso)s(ciated)30 b(with)e(the)h(shell)f(function)g(are)h(p)s
+(erformed)e(when)h(the)g(function)g(is)h(executed.)41
+b(A)28 b(function)150 3919 y(de\014nition)g(ma)m(y)h(b)s(e)f(deleted)h
+(using)f(the)h Ft(-f)e Fu(option)i(to)g(the)g Ft(unset)e
+Fu(builtin)h(\(see)h(Section)g(4.1)h([Bourne)150 4029
+y(Shell)g(Builtins],)h(page)h(44\).)275 4174 y(The)26
+b(exit)i(status)g(of)f(a)h(function)f(de\014nition)g(is)g(zero)h
+(unless)f(a)g(syn)m(tax)h(error)f(o)s(ccurs)g(or)g(a)h(readonly)150
+4283 y(function)k(with)f(the)i(same)f(name)g(already)h(exists.)46
+b(When)32 b(executed,)h(the)f(exit)h(status)g(of)f(a)g(function)150
+4393 y(is)e(the)h(exit)g(status)g(of)f(the)h(last)g(command)f(executed)
+i(in)e(the)g(b)s(o)s(dy)-8 b(.)275 4538 y(Note)22 b(that)f(for)f
+(historical)i(reasons,)h(in)e(the)g(most)g(common)g(usage)g(the)g
+(curly)f(braces)h(that)g(surround)150 4647 y(the)38 b(b)s(o)s(dy)d(of)j
+(the)f(function)g(m)m(ust)g(b)s(e)g(separated)h(from)f(the)g(b)s(o)s
+(dy)f(b)m(y)h Ft(blank)p Fu(s)f(or)h(newlines.)62 b(This)150
+4757 y(is)38 b(b)s(ecause)g(the)h(braces)f(are)h(reserv)m(ed)f(w)m
+(ords)g(and)f(are)i(only)f(recognized)i(as)e(suc)m(h)g(when)f(they)i
+(are)150 4866 y(separated)26 b(from)f(the)h(command)f(list)i(b)m(y)e
+(whitespace)h(or)g(another)g(shell)g(metac)m(haracter.)41
+b(Also,)28 b(when)150 4976 y(using)i(the)g(braces,)h(the)g
+Fr(list)i Fu(m)m(ust)d(b)s(e)g(terminated)h(b)m(y)f(a)h(semicolon,)h(a)
+e(`)p Ft(&)p Fu(',)h(or)g(a)f(newline.)275 5121 y(When)i(a)i(function)f
+(is)g(executed,)i(the)e(argumen)m(ts)h(to)g(the)f(function)g(b)s(ecome)
+g(the)h(p)s(ositional)g(pa-)150 5230 y(rameters)42 b(during)e(its)i
+(execution)h(\(see)f(Section)g(3.4.1)h([P)m(ositional)h(P)m
+(arameters],)i(page)c(21\).)75 b(The)150 5340 y(sp)s(ecial)37
+b(parameter)f(`)p Ft(#)p Fu(')g(that)h(expands)e(to)i(the)f(n)m(um)m(b)
+s(er)f(of)h(p)s(ositional)h(parameters)f(is)g(up)s(dated)f(to)p
+eop end
+%%Page: 19 25
+TeXDict begin 19 24 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(19)150 299
+y(re\015ect)36 b(the)f(c)m(hange.)56 b(Sp)s(ecial)35
+b(parameter)h Ft(0)f Fu(is)g(unc)m(hanged.)54 b(The)35
+b(\014rst)f(elemen)m(t)j(of)e(the)g Ft(FUNCNAME)150 408
+y Fu(v)-5 b(ariable)31 b(is)g(set)f(to)i(the)e(name)h(of)f(the)h
+(function)f(while)g(the)h(function)f(is)g(executing.)275
+540 y(All)25 b(other)g(asp)s(ects)g(of)g(the)g(shell)g(execution)h(en)m
+(vironmen)m(t)g(are)f(iden)m(tical)h(b)s(et)m(w)m(een)g(a)f(function)g
+(and)150 650 y(its)35 b(caller)i(with)d(these)i(exceptions:)50
+b(the)36 b Ft(DEBUG)d Fu(and)h Ft(RETURN)g Fu(traps)g(are)i(not)f
+(inherited)f(unless)h(the)150 759 y(function)26 b(has)g(b)s(een)f(giv)m
+(en)i(the)g Ft(trace)d Fu(attribute)j(using)f(the)g Ft(declare)e
+Fu(builtin)i(or)g(the)h Ft(-o)i(functrace)150 869 y Fu(option)f(has)e
+(b)s(een)h(enabled)g(with)g(the)g Ft(set)f Fu(builtin,)i(\(in)f(whic)m
+(h)f(case)j(all)f(functions)e(inherit)h(the)g Ft(DEBUG)150
+978 y Fu(and)33 b Ft(RETURN)f Fu(traps\),)j(and)e(the)h
+Ft(ERR)f Fu(trap)h(is)g(not)g(inherited)f(unless)g(the)h
+Ft(-o)c(errtrace)h Fu(shell)j(option)150 1088 y(has)h(b)s(een)f
+(enabled.)55 b(See)35 b(Section)h(4.1)g([Bourne)f(Shell)g(Builtins],)i
+(page)f(44,)i(for)c(the)i(description)f(of)150 1198 y(the)c
+Ft(trap)e Fu(builtin.)275 1329 y(The)38 b Ft(FUNCNEST)f
+Fu(v)-5 b(ariable,)42 b(if)d(set)h(to)g(a)g(n)m(umeric)f(v)-5
+b(alue)39 b(greater)h(than)f(0,)j(de\014nes)d(a)g(maxim)m(um)150
+1439 y(function)24 b(nesting)h(lev)m(el.)40 b(F)-8 b(unction)25
+b(in)m(v)m(o)s(cations)i(that)e(exceed)g(the)g(limit)g(cause)g(the)g
+(en)m(tire)g(command)150 1548 y(to)31 b(ab)s(ort.)275
+1680 y(If)37 b(the)g(builtin)g(command)h Ft(return)d
+Fu(is)j(executed)g(in)g(a)g(function,)h(the)e(function)h(completes)h
+(and)150 1789 y(execution)25 b(resumes)e(with)h(the)g(next)g(command)f
+(after)i(the)f(function)f(call.)40 b(An)m(y)24 b(command)f(asso)s
+(ciated)150 1899 y(with)36 b(the)h Ft(RETURN)d Fu(trap)i(is)h(executed)
+g(b)s(efore)f(execution)i(resumes.)57 b(When)37 b(a)f(function)g
+(completes,)150 2008 y(the)h(v)-5 b(alues)38 b(of)f(the)g(p)s
+(ositional)h(parameters)f(and)g(the)g(sp)s(ecial)h(parameter)f(`)p
+Ft(#)p Fu(')g(are)h(restored)f(to)h(the)150 2118 y(v)-5
+b(alues)26 b(they)f(had)g(prior)f(to)i(the)g(function's)f(execution.)40
+b(If)25 b(a)h(n)m(umeric)f(argumen)m(t)h(is)f(giv)m(en)h(to)g
+Ft(return)p Fu(,)150 2228 y(that)j(is)g(the)f(function's)h(return)e
+(status;)j(otherwise)f(the)f(function's)h(return)e(status)i(is)f(the)h
+(exit)h(status)150 2337 y(of)h(the)f(last)h(command)f(executed)i(b)s
+(efore)e(the)g Ft(return)p Fu(.)275 2469 y(V)-8 b(ariables)31
+b(lo)s(cal)g(to)f(the)g(function)f(ma)m(y)i(b)s(e)e(declared)h(with)f
+(the)h Ft(local)f Fu(builtin.)40 b(These)29 b(v)-5 b(ariables)150
+2578 y(are)25 b(visible)h(only)f(to)g(the)g(function)g(and)f(the)i
+(commands)e(it)i(in)m(v)m(ok)m(es.)40 b(This)24 b(is)h(particularly)h
+(imp)s(ortan)m(t)150 2688 y(when)j(a)i(shell)g(function)f(calls)h
+(other)g(functions.)275 2819 y(Lo)s(cal)41 b(v)-5 b(ariables)42
+b Ft(")p Fu(shado)m(w)p Ft(")e Fu(v)-5 b(ariables)42
+b(with)f(the)g(same)g(name)g(declared)h(at)f(previous)g(scop)s(es.)150
+2929 y(F)-8 b(or)41 b(instance,)j(a)d(lo)s(cal)h(v)-5
+b(ariable)41 b(declared)g(in)f(a)h(function)f(hides)g(a)h(global)h(v)-5
+b(ariable)41 b(of)g(the)g(same)150 3039 y(name:)59 b(references)40
+b(and)f(assignmen)m(ts)h(refer)f(to)i(the)f(lo)s(cal)g(v)-5
+b(ariable,)43 b(lea)m(ving)f(the)d(global)i(v)-5 b(ariable)150
+3148 y(unmo)s(di\014ed.)39 b(When)30 b(the)g(function)g(returns,)g(the)
+g(global)i(v)-5 b(ariable)31 b(is)g(once)g(again)g(visible.)275
+3280 y(The)f(shell)h(uses)g Fr(dynamic)g(scoping)39 b
+Fu(to)32 b(con)m(trol)g(a)f(v)-5 b(ariable's)32 b(visibilit)m(y)h
+(within)d(functions.)42 b(With)150 3389 y(dynamic)31
+b(scoping,)i(visible)e(v)-5 b(ariables)32 b(and)f(their)h(v)-5
+b(alues)32 b(are)f(a)h(result)g(of)f(the)h(sequence)g(of)f(function)150
+3499 y(calls)37 b(that)g(caused)g(execution)g(to)g(reac)m(h)g(the)g
+(curren)m(t)f(function.)58 b(The)36 b(v)-5 b(alue)36
+b(of)h(a)g(v)-5 b(ariable)37 b(that)g(a)150 3608 y(function)24
+b(sees)g(dep)s(ends)f(on)h(its)g(v)-5 b(alue)25 b(within)e(its)i
+(caller,)i(if)d(an)m(y)-8 b(,)26 b(whether)e(that)g(caller)i(is)e(the)g
+Ft(")p Fu(global)p Ft(")150 3718 y Fu(scop)s(e)41 b(or)g(another)g
+(shell)g(function.)73 b(This)40 b(is)h(also)h(the)f(v)-5
+b(alue)41 b(that)h(a)f(lo)s(cal)i(v)-5 b(ariable)41 b(declaration)150
+3828 y Ft(")p Fu(shado)m(ws)p Ft(")p Fu(,)30 b(and)g(the)g(v)-5
+b(alue)31 b(that)g(is)f(restored)h(when)e(the)i(function)f(returns.)275
+3959 y(F)-8 b(or)41 b(example,)j(if)d(a)g(v)-5 b(ariable)41
+b Fr(v)-5 b(ar)48 b Fu(is)40 b(declared)h(as)g(lo)s(cal)h(in)f
+(function)f Fr(func1)p Fu(,)j(and)d Fr(func1)48 b Fu(calls)150
+4069 y(another)33 b(function)g Fr(func2)p Fu(,)g(references)g(to)h
+Fr(v)-5 b(ar)39 b Fu(made)33 b(from)f(within)h Fr(func2)39
+b Fu(will)34 b(resolv)m(e)g(to)g(the)f(lo)s(cal)150 4178
+y(v)-5 b(ariable)31 b Fr(v)-5 b(ar)37 b Fu(from)30 b
+Fr(func1)p Fu(,)g(shado)m(wing)h(an)m(y)f(global)i(v)-5
+b(ariable)31 b(named)f Fr(v)-5 b(ar)p Fu(.)275 4310 y(The)29
+b(follo)m(wing)j(script)f(demonstrates)f(this)h(b)s(eha)m(vior.)40
+b(When)31 b(executed,)g(the)g(script)f(displa)m(ys)390
+4441 y Ft(In)47 b(func2,)f(var)h(=)h(func1)e(local)390
+4573 y(func1\(\))390 4682 y({)581 4792 y(local)g(var='func1)f(local')
+581 4902 y(func2)390 5011 y(})390 5230 y(func2\(\))390
+5340 y({)p eop end
+%%Page: 20 26
+TeXDict begin 20 25 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(20)581 299
+y Ft(echo)47 b("In)f(func2,)h(var)f(=)i($var")390 408
+y(})390 628 y(var=global)390 737 y(func1)275 878 y Fu(The)32
+b Ft(unset)g Fu(builtin)g(also)i(acts)g(using)e(the)i(same)f(dynamic)g
+(scop)s(e:)46 b(if)33 b(a)g(v)-5 b(ariable)34 b(is)f(lo)s(cal)h(to)g
+(the)150 987 y(curren)m(t)i(scop)s(e,)h Ft(unset)e Fu(will)h(unset)g
+(it;)j(otherwise)e(the)f(unset)f(will)h(refer)g(to)h(the)f(v)-5
+b(ariable)37 b(found)d(in)150 1097 y(an)m(y)j(calling)h(scop)s(e)f(as)g
+(describ)s(ed)f(ab)s(o)m(v)m(e.)61 b(If)36 b(a)h(v)-5
+b(ariable)38 b(at)f(the)g(curren)m(t)g(lo)s(cal)h(scop)s(e)e(is)h
+(unset,)h(it)150 1207 y(will)27 b(remain)h(so)f(un)m(til)g(it)h(is)f
+(reset)h(in)f(that)g(scop)s(e)h(or)f(un)m(til)g(the)h(function)e
+(returns.)39 b(Once)27 b(the)g(function)150 1316 y(returns,)34
+b(an)m(y)h(instance)g(of)f(the)g(v)-5 b(ariable)35 b(at)g(a)g(previous)
+e(scop)s(e)i(will)f(b)s(ecome)h(visible.)52 b(If)34 b(the)g(unset)150
+1426 y(acts)e(on)f(a)h(v)-5 b(ariable)32 b(at)g(a)f(previous)g(scop)s
+(e,)h(an)m(y)f(instance)h(of)f(a)h(v)-5 b(ariable)32
+b(with)f(that)h(name)f(that)h(had)150 1535 y(b)s(een)e(shado)m(w)m(ed)g
+(will)h(b)s(ecome)g(visible.)275 1676 y(F)-8 b(unction)51
+b(names)f(and)g(de\014nitions)g(ma)m(y)i(b)s(e)e(listed)h(with)f(the)h
+Ft(-f)f Fu(option)h(to)g(the)g Ft(declare)150 1786 y
+Fu(\()p Ft(typeset)p Fu(\))35 b(builtin)g(command)h(\(see)h(Section)g
+(4.2)g([Bash)f(Builtins],)i(page)f(51\).)59 b(The)35
+b Ft(-F)h Fu(option)g(to)150 1895 y Ft(declare)e Fu(or)i
+Ft(typeset)e Fu(will)i(list)h(the)f(function)g(names)g(only)g(\(and)g
+(optionally)h(the)f(source)g(\014le)h(and)150 2005 y(line)c(n)m(um)m(b)
+s(er,)g(if)f(the)h Ft(extdebug)e Fu(shell)i(option)g(is)g(enabled\).)49
+b(F)-8 b(unctions)33 b(ma)m(y)h(b)s(e)e(exp)s(orted)g(so)h(that)150
+2114 y(subshells)j(automatically)k(ha)m(v)m(e)f(them)e(de\014ned)f
+(with)h(the)h Ft(-f)e Fu(option)i(to)g(the)g Ft(export)d
+Fu(builtin)i(\(see)150 2224 y(Section)31 b(4.1)h([Bourne)e(Shell)g
+(Builtins],)h(page)h(44\).)275 2365 y(F)-8 b(unctions)33
+b(ma)m(y)g(b)s(e)g(recursiv)m(e.)48 b(The)32 b Ft(FUNCNEST)f
+Fu(v)-5 b(ariable)34 b(ma)m(y)f(b)s(e)f(used)g(to)i(limit)g(the)f
+(depth)f(of)150 2474 y(the)27 b(function)f(call)i(stac)m(k)h(and)d
+(restrict)h(the)g(n)m(um)m(b)s(er)f(of)h(function)f(in)m(v)m(o)s
+(cations.)42 b(By)27 b(default,)g(no)g(limit)150 2584
+y(is)j(placed)h(on)g(the)f(n)m(um)m(b)s(er)f(of)i(recursiv)m(e)f
+(calls.)150 2834 y Fs(3.4)68 b(Shell)45 b(P)l(arameters)150
+2993 y Fu(A)23 b Fr(parameter)31 b Fu(is)23 b(an)g(en)m(tit)m(y)i(that)
+f(stores)g(v)-5 b(alues.)39 b(It)23 b(can)h(b)s(e)f(a)g
+Ft(name)p Fu(,)h(a)g(n)m(um)m(b)s(er,)f(or)h(one)f(of)h(the)f(sp)s
+(ecial)150 3103 y(c)m(haracters)i(listed)e(b)s(elo)m(w.)39
+b(A)23 b Fr(v)-5 b(ariable)30 b Fu(is)23 b(a)g(parameter)h(denoted)f(b)
+m(y)h(a)f Ft(name)p Fu(.)37 b(A)24 b(v)-5 b(ariable)24
+b(has)f(a)g Fr(v)-5 b(alue)150 3212 y Fu(and)33 b(zero)i(or)f(more)g
+Fr(attributes)p Fu(.)52 b(A)m(ttributes)35 b(are)f(assigned)g(using)g
+(the)g Ft(declare)e Fu(builtin)h(command)150 3322 y(\(see)e(the)g
+(description)f(of)h(the)f Ft(declare)f Fu(builtin)h(in)g(Section)h(4.2)
+g([Bash)g(Builtins],)g(page)g(51\).)275 3462 y(A)d(parameter)h(is)g
+(set)g(if)f(it)h(has)f(b)s(een)g(assigned)h(a)g(v)-5
+b(alue.)40 b(The)28 b(n)m(ull)h(string)f(is)h(a)g(v)-5
+b(alid)28 b(v)-5 b(alue.)41 b(Once)150 3572 y(a)31 b(v)-5
+b(ariable)31 b(is)f(set,)i(it)e(ma)m(y)h(b)s(e)f(unset)g(only)h(b)m(y)f
+(using)g(the)g Ft(unset)f Fu(builtin)h(command.)275 3713
+y(A)g(v)-5 b(ariable)31 b(ma)m(y)g(b)s(e)f(assigned)g(to)i(b)m(y)e(a)h
+(statemen)m(t)h(of)e(the)h(form)390 3853 y Fj(name)p
+Ft(=[)p Fj(value)p Ft(])150 3994 y Fu(If)j Fr(v)-5 b(alue)40
+b Fu(is)35 b(not)g(giv)m(en,)h(the)f(v)-5 b(ariable)35
+b(is)g(assigned)g(the)f(n)m(ull)h(string.)53 b(All)35
+b Fr(v)-5 b(alue)5 b Fu(s)35 b(undergo)f(tilde)h(ex-)150
+4103 y(pansion,)h(parameter)f(and)f(v)-5 b(ariable)36
+b(expansion,)f(command)g(substitution,)h(arithmetic)g(expansion,)150
+4213 y(and)k(quote)h(remo)m(v)-5 b(al)42 b(\(detailed)h(b)s(elo)m(w\).)
+72 b(If)40 b(the)h(v)-5 b(ariable)41 b(has)g(its)g Ft(integer)e
+Fu(attribute)i(set,)j(then)150 4323 y Fr(v)-5 b(alue)38
+b Fu(is)33 b(ev)-5 b(aluated)34 b(as)f(an)g(arithmetic)h(expression)f
+(ev)m(en)h(if)e(the)h Ft($\(\(...)o(\)\))f Fu(expansion)h(is)g(not)g
+(used)150 4432 y(\(see)e(Section)g(3.5.5)i([Arithmetic)e(Expansion],)f
+(page)h(31\).)42 b(W)-8 b(ord)31 b(splitting)g(is)g(not)f(p)s
+(erformed,)f(with)150 4542 y(the)35 b(exception)h(of)f
+Ft("$@")f Fu(as)h(explained)g(b)s(elo)m(w.)54 b(Filename)36
+b(expansion)f(is)g(not)g(p)s(erformed.)53 b(Assign-)150
+4651 y(men)m(t)33 b(statemen)m(ts)h(ma)m(y)f(also)g(app)s(ear)f(as)g
+(argumen)m(ts)h(to)g(the)g Ft(alias)p Fu(,)e Ft(declare)p
+Fu(,)g Ft(typeset)p Fu(,)g Ft(export)p Fu(,)150 4761
+y Ft(readonly)p Fu(,)38 b(and)g Ft(local)f Fu(builtin)h(commands)g(\()p
+Fr(declaration)j Fu(commands\).)64 b(When)39 b(in)f Fm(posix)f
+Fu(mo)s(de)150 4871 y(\(see)29 b(Section)h(6.11)g([Bash)f(POSIX)e(Mo)s
+(de],)j(page)f(101\),)h(these)f(builtins)f(ma)m(y)h(app)s(ear)f(in)g(a)
+h(command)150 4980 y(after)34 b(one)g(or)f(more)h(instances)g(of)f(the)
+h Ft(command)d Fu(builtin)i(and)g(retain)h(these)g(assignmen)m(t)g
+(statemen)m(t)150 5090 y(prop)s(erties.)275 5230 y(In)29
+b(the)h(con)m(text)i(where)d(an)h(assignmen)m(t)h(statemen)m(t)h(is)e
+(assigning)g(a)h(v)-5 b(alue)30 b(to)h(a)f(shell)g(v)-5
+b(ariable)31 b(or)150 5340 y(arra)m(y)24 b(index)f(\(see)h(Section)g
+(6.7)g([Arra)m(ys],)i(page)e(95\),)i(the)e(`)p Ft(+=)p
+Fu(')f(op)s(erator)g(can)h(b)s(e)f(used)f(to)i(app)s(end)e(to)i(or)p
+eop end
+%%Page: 21 27
+TeXDict begin 21 26 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(21)150 299
+y(add)28 b(to)i(the)f(v)-5 b(ariable's)30 b(previous)e(v)-5
+b(alue.)41 b(This)28 b(includes)g(argumen)m(ts)i(to)f(builtin)g
+(commands)f(suc)m(h)h(as)150 408 y Ft(declare)e Fu(that)i(accept)h
+(assignmen)m(t)f(statemen)m(ts)h(\()p Fr(declaration)h
+Fu(commands\).)40 b(When)28 b(`)p Ft(+=)p Fu(')h(is)f(applied)150
+518 y(to)d(a)f(v)-5 b(ariable)24 b(for)g(whic)m(h)f(the)h
+Fr(in)m(teger)32 b Fu(attribute)24 b(has)g(b)s(een)f(set,)j
+Fr(v)-5 b(alue)29 b Fu(is)24 b(ev)-5 b(aluated)25 b(as)f(an)g
+(arithmetic)150 628 y(expression)30 b(and)f(added)g(to)i(the)f(v)-5
+b(ariable's)30 b(curren)m(t)g(v)-5 b(alue,)31 b(whic)m(h)e(is)h(also)h
+(ev)-5 b(aluated.)42 b(When)29 b(`)p Ft(+=)p Fu(')h(is)150
+737 y(applied)25 b(to)h(an)f(arra)m(y)h(v)-5 b(ariable)26
+b(using)f(comp)s(ound)f(assignmen)m(t)i(\(see)g(Section)g(6.7)g([Arra)m
+(ys],)h(page)f(95\),)150 847 y(the)33 b(v)-5 b(ariable's)33
+b(v)-5 b(alue)33 b(is)g(not)g(unset)f(\(as)h(it)g(is)g(when)e(using)i
+(`)p Ft(=)p Fu('\),)g(and)f(new)g(v)-5 b(alues)33 b(are)g(app)s(ended)e
+(to)150 956 y(the)26 b(arra)m(y)h(b)s(eginning)e(at)i(one)f(greater)h
+(than)f(the)g(arra)m(y's)h(maxim)m(um)f(index)f(\(for)i(indexed)e(arra)
+m(ys\),)j(or)150 1066 y(added)c(as)i(additional)g(k)m(ey-v)-5
+b(alue)26 b(pairs)f(in)g(an)g(asso)s(ciativ)m(e)j(arra)m(y)-8
+b(.)40 b(When)24 b(applied)h(to)h(a)g(string-v)-5 b(alued)150
+1176 y(v)g(ariable,)31 b Fr(v)-5 b(alue)36 b Fu(is)31
+b(expanded)e(and)h(app)s(ended)f(to)i(the)f(v)-5 b(ariable's)32
+b(v)-5 b(alue.)275 1319 y(A)28 b(v)-5 b(ariable)29 b(can)f(b)s(e)f
+(assigned)i(the)f Fr(nameref)45 b Fu(attribute)29 b(using)f(the)g
+Ft(-n)f Fu(option)i(to)g(the)f Ft(declare)e Fu(or)150
+1428 y Ft(local)f Fu(builtin)h(commands)g(\(see)i(Section)f(4.2)h
+([Bash)f(Builtins],)h(page)f(51\))h(to)f(create)i(a)e
+Fr(nameref)p Fu(,)g(or)g(a)150 1538 y(reference)f(to)g(another)f(v)-5
+b(ariable.)40 b(This)24 b(allo)m(ws)j(v)-5 b(ariables)26
+b(to)g(b)s(e)e(manipulated)h(indirectly)-8 b(.)40 b(Whenev)m(er)150
+1647 y(the)31 b(nameref)g(v)-5 b(ariable)32 b(is)f(referenced,)g
+(assigned)h(to,)g(unset,)f(or)g(has)f(its)i(attributes)f(mo)s(di\014ed)
+f(\(other)150 1757 y(than)c(using)g(or)h(c)m(hanging)g(the)g(nameref)f
+(attribute)i(itself)7 b(\),)29 b(the)d(op)s(eration)h(is)g(actually)h
+(p)s(erformed)d(on)150 1867 y(the)31 b(v)-5 b(ariable)31
+b(sp)s(eci\014ed)f(b)m(y)g(the)h(nameref)f(v)-5 b(ariable's)31
+b(v)-5 b(alue.)42 b(A)30 b(nameref)g(is)h(commonly)g(used)e(within)150
+1976 y(shell)h(functions)g(to)h(refer)f(to)h(a)f(v)-5
+b(ariable)31 b(whose)f(name)h(is)f(passed)g(as)g(an)g(argumen)m(t)h(to)
+g(the)f(function.)150 2086 y(F)-8 b(or)31 b(instance,)g(if)g(a)g(v)-5
+b(ariable)31 b(name)f(is)h(passed)e(to)j(a)e(shell)h(function)f(as)h
+(its)f(\014rst)g(argumen)m(t,)h(running)390 2229 y Ft(declare)46
+b(-n)h(ref=$1)150 2372 y Fu(inside)31 b(the)h(function)f(creates)i(a)g
+(nameref)e(v)-5 b(ariable)32 b Fr(ref)49 b Fu(whose)32
+b(v)-5 b(alue)32 b(is)g(the)f(v)-5 b(ariable)33 b(name)e(passed)150
+2481 y(as)e(the)h(\014rst)e(argumen)m(t.)41 b(References)30
+b(and)e(assignmen)m(ts)i(to)g Fr(ref)p Fu(,)f(and)g(c)m(hanges)h(to)g
+(its)f(attributes,)i(are)150 2591 y(treated)g(as)f(references,)g
+(assignmen)m(ts,)h(and)e(attribute)i(mo)s(di\014cations)f(to)h(the)f(v)
+-5 b(ariable)30 b(whose)g(name)150 2701 y(w)m(as)h(passed)f(as)g
+Ft($1)p Fu(.)275 2844 y(If)h(the)g(con)m(trol)i(v)-5
+b(ariable)32 b(in)g(a)f Ft(for)g Fu(lo)s(op)h(has)f(the)g(nameref)h
+(attribute,)g(the)g(list)g(of)g(w)m(ords)f(can)h(b)s(e)150
+2953 y(a)h(list)h(of)f(shell)g(v)-5 b(ariables,)34 b(and)e(a)i(name)f
+(reference)g(will)g(b)s(e)f(established)h(for)g(eac)m(h)h(w)m(ord)e(in)
+h(the)g(list,)150 3063 y(in)c(turn,)g(when)g(the)h(lo)s(op)g(is)g
+(executed.)41 b(Arra)m(y)30 b(v)-5 b(ariables)30 b(cannot)h(b)s(e)e
+(giv)m(en)h(the)g(nameref)g(attribute.)150 3172 y(Ho)m(w)m(ev)m(er,)39
+b(nameref)d(v)-5 b(ariables)36 b(can)g(reference)g(arra)m(y)g(v)-5
+b(ariables)37 b(and)e(subscripted)f(arra)m(y)i(v)-5 b(ariables.)150
+3282 y(Namerefs)36 b(can)f(b)s(e)g(unset)g(using)g(the)h
+Ft(-n)e Fu(option)i(to)g(the)g Ft(unset)e Fu(builtin)h(\(see)h(Section)
+g(4.1)h([Bourne)150 3392 y(Shell)43 b(Builtins],)j(page)e(44\).)79
+b(Otherwise,)45 b(if)e Ft(unset)e Fu(is)i(executed)h(with)e(the)h(name)
+g(of)g(a)g(nameref)150 3501 y(v)-5 b(ariable)31 b(as)g(an)f(argumen)m
+(t,)h(the)g(v)-5 b(ariable)31 b(referenced)f(b)m(y)g(the)h(nameref)f(v)
+-5 b(ariable)31 b(will)g(b)s(e)f(unset.)150 3709 y Fk(3.4.1)63
+b(P)m(ositional)41 b(P)m(arameters)150 3856 y Fu(A)28
+b Fr(p)s(ositional)h(parameter)35 b Fu(is)28 b(a)g(parameter)g(denoted)
+g(b)m(y)g(one)g(or)g(more)g(digits,)h(other)g(than)e(the)h(single)150
+3965 y(digit)34 b Ft(0)p Fu(.)48 b(P)m(ositional)36 b(parameters)d(are)
+g(assigned)h(from)e(the)i(shell's)f(argumen)m(ts)g(when)f(it)i(is)f(in)
+m(v)m(ok)m(ed,)150 4075 y(and)38 b(ma)m(y)i(b)s(e)e(reassigned)i(using)
+e(the)h Ft(set)g Fu(builtin)f(command.)67 b(P)m(ositional)41
+b(parameter)e Ft(N)g Fu(ma)m(y)h(b)s(e)150 4185 y(referenced)34
+b(as)h Ft(${N})p Fu(,)g(or)f(as)h Ft($N)e Fu(when)h Ft(N)g
+Fu(consists)h(of)f(a)h(single)g(digit.)54 b(P)m(ositional)37
+b(parameters)d(ma)m(y)150 4294 y(not)j(b)s(e)f(assigned)h(to)g(with)f
+(assignmen)m(t)i(statemen)m(ts.)61 b(The)36 b Ft(set)g
+Fu(and)g Ft(shift)f Fu(builtins)h(are)h(used)f(to)150
+4404 y(set)k(and)f(unset)f(them)i(\(see)g(Chapter)f(4)g([Shell)h
+(Builtin)g(Commands],)h(page)f(44\).)68 b(The)39 b(p)s(ositional)150
+4513 y(parameters)44 b(are)g(temp)s(orarily)g(replaced)h(when)e(a)h
+(shell)g(function)g(is)g(executed)g(\(see)h(Section)g(3.3)150
+4623 y([Shell)30 b(F)-8 b(unctions],)32 b(page)f(18\).)275
+4766 y(When)c(a)i(p)s(ositional)g(parameter)g(consisting)f(of)h(more)f
+(than)g(a)g(single)h(digit)g(is)f(expanded,)g(it)h(m)m(ust)150
+4876 y(b)s(e)h(enclosed)h(in)f(braces.)150 5083 y Fk(3.4.2)63
+b(Sp)s(ecial)41 b(P)m(arameters)150 5230 y Fu(The)d(shell)g(treats)h
+(sev)m(eral)g(parameters)f(sp)s(ecially)-8 b(.)65 b(These)38
+b(parameters)h(ma)m(y)f(only)g(b)s(e)g(referenced;)150
+5340 y(assignmen)m(t)31 b(to)g(them)g(is)f(not)h(allo)m(w)m(ed.)p
+eop end
+%%Page: 22 28
+TeXDict begin 22 27 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(22)150 299
+y Ft(*)432 b Fu(\($*\))38 b(Expands)d(to)i(the)f(p)s(ositional)h
+(parameters,)h(starting)f(from)f(one.)59 b(When)36 b(the)g(ex-)630
+408 y(pansion)h(is)h(not)g(within)f(double)g(quotes,)j(eac)m(h)f(p)s
+(ositional)f(parameter)g(expands)f(to)i(a)630 518 y(separate)23
+b(w)m(ord.)38 b(In)21 b(con)m(texts)j(where)e(it)g(is)h(p)s(erformed,)f
+(those)h(w)m(ords)e(are)i(sub)5 b(ject)22 b(to)h(fur-)630
+628 y(ther)k(w)m(ord)g(splitting)i(and)e(\014lename)g(expansion.)40
+b(When)27 b(the)h(expansion)f(o)s(ccurs)g(within)630
+737 y(double)37 b(quotes,)k(it)d(expands)f(to)h(a)g(single)h(w)m(ord)e
+(with)h(the)f(v)-5 b(alue)39 b(of)f(eac)m(h)g(parameter)630
+847 y(separated)g(b)m(y)g(the)f(\014rst)g(c)m(haracter)i(of)f(the)g
+Ft(IFS)f Fu(sp)s(ecial)h(v)-5 b(ariable.)63 b(That)38
+b(is,)h Ft("$*")e Fu(is)630 956 y(equiv)-5 b(alen)m(t)39
+b(to)g Ft("$1)p Fj(c)p Ft($2)p Fj(c)p Ft(...)m(")p Fu(,)h(where)d
+Fr(c)44 b Fu(is)38 b(the)g(\014rst)g(c)m(haracter)h(of)f(the)g(v)-5
+b(alue)39 b(of)f(the)630 1066 y Ft(IFS)29 b Fu(v)-5 b(ariable.)41
+b(If)29 b Ft(IFS)g Fu(is)h(unset,)f(the)h(parameters)g(are)g(separated)
+g(b)m(y)g(spaces.)41 b(If)29 b Ft(IFS)g Fu(is)630 1176
+y(n)m(ull,)i(the)f(parameters)h(are)g(joined)f(without)g(in)m(terv)m
+(ening)i(separators.)150 1334 y Ft(@)432 b Fu(\($@\))43
+b(Expands)f(to)h(the)g(p)s(ositional)g(parameters,)k(starting)c(from)f
+(one.)78 b(In)42 b(con)m(texts)630 1444 y(where)35 b(w)m(ord)h
+(splitting)g(is)g(p)s(erformed,)g(this)g(expands)e(eac)m(h)j(p)s
+(ositional)g(parameter)f(to)630 1553 y(a)d(separate)h(w)m(ord;)g(if)f
+(not)g(within)g(double)f(quotes,)j(these)e(w)m(ords)g(are)g(sub)5
+b(ject)33 b(to)g(w)m(ord)630 1663 y(splitting.)60 b(In)36
+b(con)m(texts)j(where)d(w)m(ord)g(splitting)h(is)g(not)g(p)s(erformed,)
+g(this)f(expands)g(to)630 1773 y(a)c(single)h(w)m(ord)e(with)h(eac)m(h)
+h(p)s(ositional)g(parameter)f(separated)g(b)m(y)g(a)g(space.)46
+b(When)32 b(the)630 1882 y(expansion)i(o)s(ccurs)h(within)e(double)i
+(quotes,)h(and)e(w)m(ord)g(splitting)h(is)g(p)s(erformed,)f(eac)m(h)630
+1992 y(parameter)23 b(expands)f(to)i(a)f(separate)h(w)m(ord.)37
+b(That)23 b(is,)i Ft("$@")c Fu(is)i(equiv)-5 b(alen)m(t)24
+b(to)g Ft("$1")29 b("$2")630 2101 y(...)o Fu(.)39 b(If)26
+b(the)g(double-quoted)g(expansion)f(o)s(ccurs)h(within)f(a)h(w)m(ord,)h
+(the)f(expansion)g(of)g(the)630 2211 y(\014rst)31 b(parameter)h(is)g
+(joined)f(with)g(the)h(b)s(eginning)f(part)h(of)f(the)h(original)h(w)m
+(ord,)f(and)f(the)630 2321 y(expansion)25 b(of)g(the)h(last)g
+(parameter)f(is)h(joined)f(with)g(the)g(last)h(part)f(of)g(the)h
+(original)g(w)m(ord.)630 2430 y(When)i(there)g(are)g(no)g(p)s
+(ositional)g(parameters,)h Ft("$@")e Fu(and)g Ft($@)h
+Fu(expand)f(to)h(nothing)g(\(i.e.,)630 2540 y(they)j(are)f(remo)m(v)m
+(ed\).)150 2698 y Ft(#)432 b Fu(\($#\))31 b(Expands)e(to)i(the)g(n)m
+(um)m(b)s(er)e(of)h(p)s(ositional)i(parameters)e(in)g(decimal.)150
+2857 y Ft(?)432 b Fu(\($?\))88 b(Expands)45 b(to)h(the)g(exit)h(status)
+f(of)g(the)g(most)h(recen)m(tly)g(executed)g(foreground)630
+2967 y(pip)s(eline.)150 3125 y Ft(-)432 b Fu(\($-,)24
+b(a)e(h)m(yphen.\))37 b(Expands)20 b(to)i(the)f(curren)m(t)h(option)f
+(\015ags)h(as)f(sp)s(eci\014ed)g(up)s(on)f(in)m(v)m(o)s(cation,)630
+3235 y(b)m(y)38 b(the)h Ft(set)f Fu(builtin)g(command,)j(or)d(those)i
+(set)f(b)m(y)f(the)h(shell)g(itself)g(\(suc)m(h)g(as)g(the)g
+Ft(-i)630 3344 y Fu(option\).)150 3503 y Ft($)432 b Fu(\($$\))31
+b(Expands)d(to)j(the)e(pro)s(cess)h Fm(id)f Fu(of)h(the)g(shell.)41
+b(In)28 b(a)i Ft(\(\))f Fu(subshell,)h(it)g(expands)e(to)j(the)630
+3613 y(pro)s(cess)f Fm(id)g Fu(of)h(the)g(in)m(v)m(oking)g(shell,)g
+(not)g(the)f(subshell.)150 3771 y Ft(!)432 b Fu(\($!\))51
+b(Expands)32 b(to)i(the)g(pro)s(cess)f Fm(id)h Fu(of)f(the)h(job)f
+(most)h(recen)m(tly)h(placed)f(in)m(to)g(the)g(bac)m(k-)630
+3881 y(ground,)26 b(whether)g(executed)g(as)h(an)f(async)m(hronous)f
+(command)h(or)g(using)g(the)g Ft(bg)f Fu(builtin)630
+3990 y(\(see)31 b(Section)h(7.2)f([Job)f(Con)m(trol)h(Builtins],)g
+(page)h(108\).)150 4149 y Ft(0)432 b Fu(\($0\))46 b(Expands)d(to)i(the)
+g(name)g(of)f(the)h(shell)g(or)f(shell)h(script.)83 b(This)44
+b(is)g(set)h(at)h(shell)630 4259 y(initialization.)d(If)27
+b(Bash)h(is)g(in)m(v)m(ok)m(ed)h(with)e(a)i(\014le)e(of)h(commands)g
+(\(see)g(Section)h(3.8)g([Shell)630 4368 y(Scripts],)g(page)g(42\),)h
+Ft($0)e Fu(is)h(set)g(to)g(the)f(name)h(of)f(that)h(\014le.)41
+b(If)28 b(Bash)g(is)h(started)g(with)f(the)630 4478 y
+Ft(-c)i Fu(option)h(\(see)h(Section)g(6.1)f([In)m(v)m(oking)h(Bash],)g
+(page)f(86\),)i(then)d Ft($0)g Fu(is)h(set)g(to)h(the)f(\014rst)630
+4587 y(argumen)m(t)g(after)g(the)g(string)g(to)g(b)s(e)f(executed,)i
+(if)f(one)g(is)f(presen)m(t.)42 b(Otherwise,)31 b(it)g(is)f(set)630
+4697 y(to)h(the)g(\014lename)f(used)g(to)h(in)m(v)m(ok)m(e)h(Bash,)f
+(as)g(giv)m(en)g(b)m(y)f(argumen)m(t)h(zero.)150 4937
+y Fs(3.5)68 b(Shell)45 b(Expansions)150 5096 y Fu(Expansion)27
+b(is)i(p)s(erformed)d(on)i(the)g(command)g(line)h(after)f(it)h(has)f(b)
+s(een)f(split)h(in)m(to)i Ft(token)p Fu(s.)38 b(There)28
+b(are)150 5206 y(sev)m(en)j(kinds)e(of)i(expansion)f(p)s(erformed:)225
+5340 y Fq(\017)60 b Fu(brace)31 b(expansion)p eop end
+%%Page: 23 29
+TeXDict begin 23 28 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(23)225 299
+y Fq(\017)60 b Fu(tilde)31 b(expansion)225 436 y Fq(\017)60
+b Fu(parameter)31 b(and)f(v)-5 b(ariable)31 b(expansion)225
+574 y Fq(\017)60 b Fu(command)30 b(substitution)225 711
+y Fq(\017)60 b Fu(arithmetic)32 b(expansion)225 849 y
+Fq(\017)60 b Fu(w)m(ord)30 b(splitting)225 986 y Fq(\017)60
+b Fu(\014lename)31 b(expansion)275 1155 y(The)24 b(order)h(of)h
+(expansions)f(is:)39 b(brace)25 b(expansion;)j(tilde)e(expansion,)g
+(parameter)g(and)f(v)-5 b(ariable)26 b(ex-)150 1264 y(pansion,)j
+(arithmetic)i(expansion,)f(and)f(command)g(substitution)g(\(done)g(in)h
+(a)f(left-to-righ)m(t)k(fashion\);)150 1374 y(w)m(ord)d(splitting;)h
+(and)f(\014lename)h(expansion.)275 1515 y(On)42 b(systems)h(that)h(can)
+g(supp)s(ort)e(it,)47 b(there)d(is)f(an)h(additional)g(expansion)f(a)m
+(v)-5 b(ailable:)69 b Fr(pro)s(cess)150 1624 y(substitution)p
+Fu(.)50 b(This)33 b(is)h(p)s(erformed)e(at)j(the)f(same)g(time)g(as)g
+(tilde,)i(parameter,)f(v)-5 b(ariable,)35 b(and)f(arith-)150
+1734 y(metic)d(expansion)g(and)e(command)i(substitution.)275
+1874 y(After)f(these)h(expansions)f(are)g(p)s(erformed,)f(quote)i(c)m
+(haracters)h(presen)m(t)e(in)g(the)g(original)i(w)m(ord)e(are)150
+1984 y(remo)m(v)m(ed)h(unless)f(they)h(ha)m(v)m(e)g(b)s(een)f(quoted)g
+(themselv)m(es)i(\()p Fr(quote)f(remo)m(v)-5 b(al)t Fu(\).)275
+2124 y(Only)31 b(brace)i(expansion,)h(w)m(ord)e(splitting,)i(and)e
+(\014lename)h(expansion)f(can)h(increase)g(the)g(n)m(um)m(b)s(er)150
+2234 y(of)24 b(w)m(ords)g(of)g(the)h(expansion;)h(other)e(expansions)g
+(expand)g(a)g(single)h(w)m(ord)f(to)h(a)f(single)h(w)m(ord.)38
+b(The)24 b(only)150 2344 y(exceptions)i(to)f(this)g(are)g(the)g
+(expansions)g(of)g Ft("$@")f Fu(and)g Ft($*)g Fu(\(see)i(Section)f
+(3.4.2)i([Sp)s(ecial)e(P)m(arameters],)150 2453 y(page)31
+b(21\),)h(and)e Ft("${)p Fj(name)p Ft([@]}")d Fu(and)i
+Ft(${)p Fj(name)p Ft([*]})f Fu(\(see)j(Section)h(6.7)f([Arra)m(ys],)g
+(page)g(95\).)275 2594 y(After)41 b(all)i(expansions,)h
+Ft(quote)29 b(removal)40 b Fu(\(see)i(Section)h(3.5.9)g([Quote)f(Remo)m
+(v)-5 b(al],)47 b(page)42 b(35\))h(is)150 2703 y(p)s(erformed.)150
+2908 y Fk(3.5.1)63 b(Brace)40 b(Expansion)150 3055 y
+Fu(Brace)32 b(expansion)f(is)f(a)i(mec)m(hanism)f(b)m(y)f(whic)m(h)h
+(arbitrary)f(strings)h(ma)m(y)g(b)s(e)f(generated.)43
+b(This)30 b(mec)m(h-)150 3165 y(anism)35 b(is)h(similar)f(to)h
+Fr(\014lename)g(expansion)f Fu(\(see)i(Section)f(3.5.8)h([Filename)g
+(Expansion],)f(page)g(33\),)150 3275 y(but)26 b(the)h(\014lenames)g
+(generated)h(need)f(not)g(exist.)40 b(P)m(atterns)28
+b(to)f(b)s(e)g(brace)g(expanded)f(tak)m(e)i(the)f(form)g(of)150
+3384 y(an)j(optional)h Fr(pream)m(ble)p Fu(,)g(follo)m(w)m(ed)g(b)m(y)f
+(either)g(a)h(series)f(of)g(comma-separated)i(strings)d(or)h(a)h
+(sequence)150 3494 y(expression)36 b(b)s(et)m(w)m(een)g(a)h(pair)e(of)i
+(braces,)g(follo)m(w)m(ed)h(b)m(y)e(an)g(optional)h Fr(p)s(ostscript)p
+Fu(.)57 b(The)36 b(pream)m(ble)g(is)150 3603 y(pre\014xed)28
+b(to)h(eac)m(h)h(string)f(con)m(tained)h(within)e(the)h(braces,)g(and)g
+(the)g(p)s(ostscript)f(is)h(then)f(app)s(ended)f(to)150
+3713 y(eac)m(h)32 b(resulting)e(string,)h(expanding)e(left)j(to)f(righ)
+m(t.)275 3853 y(Brace)37 b(expansions)f(ma)m(y)h(b)s(e)f(nested.)59
+b(The)36 b(results)g(of)h(eac)m(h)g(expanded)f(string)g(are)h(not)g
+(sorted;)150 3963 y(left)31 b(to)g(righ)m(t)g(order)f(is)g(preserv)m
+(ed.)41 b(F)-8 b(or)31 b(example,)390 4104 y Ft(bash$)46
+b(echo)h(a{d,c,b}e)390 4213 y(ade)g(ace)g(abe)275 4354
+y Fu(A)23 b(sequence)g(expression)g(tak)m(es)i(the)e(form)g
+Ft({)p Fj(x)p Ft(..)p Fj(y)p Ft([..)p Fj(incr)p Ft(]})p
+Fu(,)e(where)i Fr(x)29 b Fu(and)23 b Fr(y)30 b Fu(are)24
+b(either)g(in)m(tegers)150 4463 y(or)42 b(single)h(c)m(haracters,)48
+b(and)41 b Fr(incr)p Fu(,)46 b(an)c(optional)i(incremen)m(t,)i(is)c(an)
+h(in)m(teger.)78 b(When)42 b(in)m(tegers)i(are)150 4573
+y(supplied,)f(the)f(expression)f(expands)f(to)i(eac)m(h)h(n)m(um)m(b)s
+(er)d(b)s(et)m(w)m(een)i Fr(x)47 b Fu(and)41 b Fr(y)p
+Fu(,)j(inclusiv)m(e.)75 b(Supplied)150 4682 y(in)m(tegers)33
+b(ma)m(y)e(b)s(e)g(pre\014xed)f(with)h(`)p Ft(0)p Fu(')h(to)g(force)g
+(eac)m(h)g(term)g(to)g(ha)m(v)m(e)g(the)g(same)g(width.)42
+b(When)31 b(either)150 4792 y Fr(x)43 b Fu(or)36 b Fr(y)44
+b Fu(b)s(egins)36 b(with)g(a)h(zero,)i(the)e(shell)g(attempts)g(to)g
+(force)g(all)h(generated)f(terms)g(to)g(con)m(tain)h(the)150
+4902 y(same)e(n)m(um)m(b)s(er)e(of)i(digits,)i(zero-padding)d(where)h
+(necessary)-8 b(.)57 b(When)35 b(c)m(haracters)i(are)f(supplied,)g(the)
+150 5011 y(expression)24 b(expands)g(to)h(eac)m(h)h(c)m(haracter)g
+(lexicographically)h(b)s(et)m(w)m(een)e Fr(x)30 b Fu(and)24
+b Fr(y)p Fu(,)i(inclusiv)m(e,)h(using)d(the)150 5121
+y(default)32 b(C)g(lo)s(cale.)48 b(Note)34 b(that)f(b)s(oth)e
+Fr(x)39 b Fu(and)31 b Fr(y)40 b Fu(m)m(ust)32 b(b)s(e)g(of)g(the)h
+(same)f(t)m(yp)s(e.)47 b(When)32 b(the)g(incremen)m(t)150
+5230 y(is)d(supplied,)g(it)h(is)f(used)f(as)i(the)f(di\013erence)h(b)s
+(et)m(w)m(een)g(eac)m(h)g(term.)41 b(The)29 b(default)g(incremen)m(t)h
+(is)f(1)h(or)f(-1)150 5340 y(as)i(appropriate.)p eop
+end
+%%Page: 24 30
+TeXDict begin 24 29 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(24)275 299
+y(Brace)36 b(expansion)g(is)f(p)s(erformed)f(b)s(efore)h(an)m(y)h
+(other)g(expansions,)h(and)e(an)m(y)g(c)m(haracters)i(sp)s(ecial)150
+408 y(to)32 b(other)g(expansions)g(are)g(preserv)m(ed)f(in)h(the)f
+(result.)45 b(It)32 b(is)g(strictly)g(textual.)46 b(Bash)32
+b(do)s(es)f(not)h(apply)150 518 y(an)m(y)27 b(syn)m(tactic)i(in)m
+(terpretation)g(to)f(the)f(con)m(text)i(of)e(the)g(expansion)g(or)g
+(the)h(text)g(b)s(et)m(w)m(een)f(the)h(braces.)275 656
+y(A)h(correctly-formed)i(brace)f(expansion)f(m)m(ust)h(con)m(tain)h
+(unquoted)e(op)s(ening)g(and)g(closing)i(braces,)150
+766 y(and)h(at)i(least)g(one)f(unquoted)g(comma)g(or)g(a)h(v)-5
+b(alid)33 b(sequence)g(expression.)48 b(An)m(y)33 b(incorrectly)h
+(formed)150 875 y(brace)d(expansion)f(is)g(left)h(unc)m(hanged.)275
+1013 y(A)25 b Fi({)h Fu(or)f(`)p Ft(,)p Fu(')g(ma)m(y)h(b)s(e)f(quoted)
+h(with)f(a)g(bac)m(kslash)h(to)g(prev)m(en)m(t)g(its)g(b)s(eing)f
+(considered)g(part)g(of)h(a)g(brace)150 1123 y(expression.)51
+b(T)-8 b(o)34 b(a)m(v)m(oid)i(con\015icts)e(with)g(parameter)g
+(expansion,)h(the)f(string)g(`)p Ft(${)p Fu(')g(is)g(not)g(considered)
+150 1232 y(eligible)e(for)e(brace)h(expansion,)f(and)g(inhibits)g
+(brace)h(expansion)f(un)m(til)g(the)h(closing)h(`)p Ft(})p
+Fu('.)275 1370 y(This)e(construct)h(is)g(t)m(ypically)i(used)d(as)h
+(shorthand)f(when)g(the)h(common)g(pre\014x)f(of)h(the)g(strings)g(to)
+150 1480 y(b)s(e)f(generated)h(is)g(longer)g(than)f(in)g(the)g(ab)s(o)m
+(v)m(e)i(example:)390 1618 y Ft(mkdir)46 b(/usr/local/src/bash/{old,n)o
+(ew,)o(dist)o(,bug)o(s})275 1756 y Fu(or)390 1894 y Ft(chown)g(root)h
+(/usr/{ucb/{ex,edit},lib/)o({ex?)o(.?*,)o(how)o(_ex})o(})150
+2097 y Fk(3.5.2)63 b(Tilde)41 b(Expansion)150 2243 y
+Fu(If)29 b(a)h(w)m(ord)g(b)s(egins)f(with)g(an)h(unquoted)f(tilde)h(c)m
+(haracter)h(\(`)p Ft(~)p Fu('\),)g(all)g(of)f(the)g(c)m(haracters)h(up)
+d(to)j(the)f(\014rst)150 2353 y(unquoted)24 b(slash)g(\(or)h(all)h(c)m
+(haracters,)h(if)e(there)g(is)f(no)h(unquoted)e(slash\))i(are)g
+(considered)g(a)g Fr(tilde-pre\014x)p Fu(.)150 2463 y(If)38
+b(none)g(of)g(the)h(c)m(haracters)g(in)f(the)h(tilde-pre\014x)f(are)h
+(quoted,)h(the)f(c)m(haracters)h(in)d(the)i(tilde-pre\014x)150
+2572 y(follo)m(wing)28 b(the)g(tilde)f(are)h(treated)g(as)f(a)g(p)s
+(ossible)g Fr(login)h(name)p Fu(.)39 b(If)27 b(this)g(login)h(name)f
+(is)g(the)g(n)m(ull)g(string,)150 2682 y(the)35 b(tilde)g(is)g
+(replaced)g(with)f(the)h(v)-5 b(alue)35 b(of)g(the)g
+Ft(HOME)e Fu(shell)i(v)-5 b(ariable.)54 b(If)34 b Ft(HOME)g
+Fu(is)h(unset,)g(the)g(home)150 2791 y(directory)e(of)g(the)f(user)g
+(executing)i(the)e(shell)h(is)f(substituted)g(instead.)47
+b(Otherwise,)33 b(the)g(tilde-pre\014x)150 2901 y(is)d(replaced)h(with)
+f(the)h(home)f(directory)h(asso)s(ciated)h(with)e(the)h(sp)s(eci\014ed)
+e(login)j(name.)275 3039 y(If)g(the)h(tilde-pre\014x)f(is)h(`)p
+Ft(~+)p Fu(',)g(the)g(v)-5 b(alue)33 b(of)g(the)g(shell)g(v)-5
+b(ariable)34 b Ft(PWD)d Fu(replaces)j(the)f(tilde-pre\014x.)47
+b(If)150 3149 y(the)31 b(tilde-pre\014x)f(is)g(`)p Ft(~-)p
+Fu(',)h(the)f(v)-5 b(alue)31 b(of)g(the)f(shell)h(v)-5
+b(ariable)31 b Ft(OLDPWD)p Fu(,)e(if)h(it)h(is)g(set,)g(is)f
+(substituted.)275 3287 y(If)f(the)h(c)m(haracters)h(follo)m(wing)h(the)
+e(tilde)g(in)g(the)g(tilde-pre\014x)g(consist)g(of)g(a)h(n)m(um)m(b)s
+(er)d Fr(N)p Fu(,)j(optionally)150 3396 y(pre\014xed)22
+b(b)m(y)h(a)h(`)p Ft(+)p Fu(')f(or)h(a)f(`)p Ft(-)p Fu(',)j(the)d
+(tilde-pre\014x)g(is)h(replaced)f(with)g(the)h(corresp)s(onding)e
+(elemen)m(t)j(from)e(the)150 3506 y(directory)36 b(stac)m(k,)i(as)e(it)
+g(w)m(ould)f(b)s(e)g(displa)m(y)m(ed)h(b)m(y)g(the)f
+Ft(dirs)g Fu(builtin)g(in)m(v)m(ok)m(ed)i(with)e(the)g(c)m(haracters)
+150 3615 y(follo)m(wing)40 b(tilde)f(in)g(the)f(tilde-pre\014x)h(as)g
+(an)f(argumen)m(t)h(\(see)h(Section)f(6.8)h([The)e(Directory)i(Stac)m
+(k],)150 3725 y(page)c(97\).)57 b(If)35 b(the)g(tilde-pre\014x,)i(sans)
+e(the)h(tilde,)h(consists)f(of)g(a)f(n)m(um)m(b)s(er)f(without)i(a)f
+(leading)h(`)p Ft(+)p Fu(')g(or)150 3834 y(`)p Ft(-)p
+Fu(',)31 b(`)p Ft(+)p Fu(')f(is)h(assumed.)275 3972 y(If)e(the)i(login)
+g(name)g(is)f(in)m(v)-5 b(alid,)31 b(or)g(the)f(tilde)h(expansion)f
+(fails,)i(the)e(w)m(ord)g(is)h(left)g(unc)m(hanged.)275
+4110 y(Eac)m(h)38 b(v)-5 b(ariable)38 b(assignmen)m(t)h(is)e(c)m(hec)m
+(k)m(ed)j(for)d(unquoted)g(tilde-pre\014xes)h(immediately)g(follo)m
+(wing)150 4220 y(a)d(`)p Ft(:)p Fu(')g(or)g(the)g(\014rst)f(`)p
+Ft(=)p Fu('.)54 b(In)34 b(these)h(cases,)i(tilde)e(expansion)g(is)g
+(also)h(p)s(erformed.)52 b(Consequen)m(tly)-8 b(,)37
+b(one)150 4330 y(ma)m(y)29 b(use)e(\014lenames)h(with)g(tildes)g(in)g
+(assignmen)m(ts)g(to)h Ft(PATH)p Fu(,)f Ft(MAILPATH)p
+Fu(,)e(and)h Ft(CDPATH)p Fu(,)g(and)h(the)g(shell)150
+4439 y(assigns)j(the)f(expanded)g(v)-5 b(alue.)275 4577
+y(The)29 b(follo)m(wing)j(table)g(sho)m(ws)e(ho)m(w)g(Bash)h(treats)g
+(unquoted)e(tilde-pre\014xes:)150 4742 y Ft(~)432 b Fu(The)30
+b(v)-5 b(alue)31 b(of)f Ft($HOME)150 4905 y(~/foo)240
+b($HOME/foo)150 5068 y(~fred/foo)630 5177 y Fu(The)30
+b(sub)s(directory)f Ft(foo)h Fu(of)g(the)h(home)f(directory)h(of)g(the)
+f(user)g Ft(fred)150 5340 y(~+/foo)192 b($PWD/foo)p eop
+end
+%%Page: 25 31
+TeXDict begin 25 30 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(25)150 299
+y Ft(~-/foo)192 b(${OLDPWD-'~-'}/foo)150 471 y(~)p Fj(N)384
+b Fu(The)30 b(string)g(that)h(w)m(ould)f(b)s(e)g(displa)m(y)m(ed)h(b)m
+(y)f(`)p Ft(dirs)g(+)p Fj(N)p Fu(')150 644 y Ft(~+)p
+Fj(N)336 b Fu(The)30 b(string)g(that)h(w)m(ould)f(b)s(e)g(displa)m(y)m
+(ed)h(b)m(y)f(`)p Ft(dirs)g(+)p Fj(N)p Fu(')150 816 y
+Ft(~-)p Fj(N)336 b Fu(The)30 b(string)g(that)h(w)m(ould)f(b)s(e)g
+(displa)m(y)m(ed)h(b)m(y)f(`)p Ft(dirs)g(-)p Fj(N)p Fu(')275
+995 y(Bash)40 b(also)h(p)s(erforms)e(tilde)h(expansion)g(on)h(w)m(ords)
+e(satisfying)i(the)f(conditions)h(of)f(v)-5 b(ariable)41
+b(as-)150 1105 y(signmen)m(ts)f(\(see)h(Section)g(3.4)g([Shell)f(P)m
+(arameters],)k(page)d(20\))g(when)e(they)h(app)s(ear)f(as)i(argumen)m
+(ts)150 1215 y(to)c(simple)f(commands.)57 b(Bash)36 b(do)s(es)f(not)h
+(do)g(this,)i(except)f(for)e(the)h Fr(declaration)i Fu(commands)d
+(listed)150 1324 y(ab)s(o)m(v)m(e,)d(when)d(in)h Fm(posix)g
+Fu(mo)s(de.)150 1536 y Fk(3.5.3)63 b(Shell)41 b(P)m(arameter)f
+(Expansion)150 1683 y Fu(The)g(`)p Ft($)p Fu(')h(c)m(haracter)i(in)m
+(tro)s(duces)d(parameter)h(expansion,)j(command)d(substitution,)i(or)e
+(arithmetic)150 1793 y(expansion.)d(The)22 b(parameter)h(name)f(or)g
+(sym)m(b)s(ol)h(to)g(b)s(e)e(expanded)h(ma)m(y)h(b)s(e)f(enclosed)h(in)
+f(braces,)i(whic)m(h)150 1903 y(are)31 b(optional)g(but)f(serv)m(e)h
+(to)h(protect)f(the)g(v)-5 b(ariable)31 b(to)g(b)s(e)f(expanded)g(from)
+g(c)m(haracters)i(immediately)150 2012 y(follo)m(wing)g(it)f(whic)m(h)f
+(could)g(b)s(e)g(in)m(terpreted)h(as)f(part)h(of)f(the)h(name.)275
+2160 y(When)44 b(braces)i(are)f(used,)j(the)e(matc)m(hing)g(ending)f
+(brace)g(is)g(the)g(\014rst)g(`)p Ft(})p Fu(')g(not)g(escap)s(ed)h(b)m
+(y)f(a)150 2269 y(bac)m(kslash)40 b(or)f(within)g(a)g(quoted)g(string,)
+j(and)c(not)i(within)e(an)h(em)m(b)s(edded)f(arithmetic)j(expansion,)
+150 2379 y(command)30 b(substitution,)g(or)h(parameter)g(expansion.)275
+2526 y(The)40 b(basic)i(form)f(of)g(parameter)h(expansion)f(is)h($)p
+Fi({)p Fr(parameter)7 b Fi(})p Fu(.)74 b(The)41 b(v)-5
+b(alue)42 b(of)g Fr(parameter)48 b Fu(is)150 2636 y(substituted.)43
+b(The)31 b Fr(parameter)39 b Fu(is)31 b(a)h(shell)f(parameter)h(as)g
+(describ)s(ed)e(ab)s(o)m(v)m(e)j(\(see)f(Section)g(3.4)h([Shell)150
+2746 y(P)m(arameters],)e(page)f(20\))h(or)e(an)g(arra)m(y)h(reference)f
+(\(see)i(Section)f(6.7)g([Arra)m(ys],)g(page)g(95\).)42
+b(The)29 b(braces)150 2855 y(are)j(required)g(when)f
+Fr(parameter)39 b Fu(is)32 b(a)h(p)s(ositional)f(parameter)h(with)f
+(more)g(than)g(one)g(digit,)i(or)e(when)150 2965 y Fr(parameter)37
+b Fu(is)31 b(follo)m(w)m(ed)h(b)m(y)e(a)h(c)m(haracter)h(that)f(is)f
+(not)h(to)g(b)s(e)f(in)m(terpreted)g(as)h(part)f(of)h(its)f(name.)275
+3112 y(If)k(the)h(\014rst)f(c)m(haracter)i(of)f Fr(parameter)42
+b Fu(is)35 b(an)g(exclamation)i(p)s(oin)m(t)e(\(!\),)i(and)d
+Fr(parameter)42 b Fu(is)34 b(not)i(a)150 3222 y Fr(nameref)p
+Fu(,)c(it)f(in)m(tro)s(duces)h(a)f(lev)m(el)i(of)f(indirection.)44
+b(Bash)31 b(uses)g(the)g(v)-5 b(alue)32 b(formed)f(b)m(y)g(expanding)g
+(the)150 3332 y(rest)c(of)f Fr(parameter)33 b Fu(as)27
+b(the)g(new)f Fr(parameter)7 b Fu(;)28 b(this)e(is)g(then)g(expanded)g
+(and)g(that)h(v)-5 b(alue)27 b(is)f(used)g(in)g(the)150
+3441 y(rest)33 b(of)f(the)h(expansion,)g(rather)g(than)f(the)h
+(expansion)f(of)h(the)g(original)g Fr(parameter)p Fu(.)48
+b(This)32 b(is)g(kno)m(wn)150 3551 y(as)42 b Ft(indirect)28
+b(expansion)p Fu(.)71 b(The)41 b(v)-5 b(alue)41 b(is)h(sub)5
+b(ject)41 b(to)h(tilde)g(expansion,)i(parameter)e(expansion,)150
+3660 y(command)31 b(substitution,)g(and)g(arithmetic)h(expansion.)43
+b(If)31 b Fr(parameter)38 b Fu(is)32 b(a)f(nameref,)h(this)f(expands)
+150 3770 y(to)d(the)g(name)g(of)f(the)h(v)-5 b(ariable)28
+b(referenced)g(b)m(y)f Fr(parameter)35 b Fu(instead)27
+b(of)h(p)s(erforming)e(the)i(complete)h(in-)150 3880
+y(direct)e(expansion.)39 b(The)25 b(exceptions)i(to)g(this)f(are)h(the)
+f(expansions)g(of)g($)p Fi({)p Fu(!)p Fr(pre\014x)6 b
+Fu(*)p Fi(})28 b Fu(and)d($)p Fi({)p Fu(!)p Fr(name)5
+b Fu([@])p Fi(})150 3989 y Fu(describ)s(ed)28 b(b)s(elo)m(w.)41
+b(The)28 b(exclamation)j(p)s(oin)m(t)f(m)m(ust)f(immediately)h(follo)m
+(w)g(the)g(left)f(brace)h(in)f(order)f(to)150 4099 y(in)m(tro)s(duce)i
+(indirection.)275 4246 y(In)39 b(eac)m(h)i(of)g(the)f(cases)h(b)s(elo)m
+(w,)i Fr(w)m(ord)h Fu(is)c(sub)5 b(ject)40 b(to)h(tilde)f(expansion,)j
+(parameter)e(expansion,)150 4356 y(command)30 b(substitution,)g(and)g
+(arithmetic)i(expansion.)275 4503 y(When)h(not)h(p)s(erforming)e
+(substring)h(expansion,)h(using)g(the)f(form)h(describ)s(ed)e(b)s(elo)m
+(w)i(\(e.g.,)i(`)p Ft(:-)p Fu('\),)150 4613 y(Bash)d(tests)h(for)e(a)i
+(parameter)f(that)h(is)e(unset)h(or)g(n)m(ull.)48 b(Omitting)33
+b(the)h(colon)f(results)g(in)g(a)g(test)h(only)150 4723
+y(for)c(a)i(parameter)f(that)g(is)g(unset.)41 b(Put)31
+b(another)f(w)m(a)m(y)-8 b(,)33 b(if)e(the)f(colon)i(is)f(included,)f
+(the)h(op)s(erator)g(tests)150 4832 y(for)36 b(b)s(oth)g
+Fr(parameter)7 b Fu('s)37 b(existence)h(and)e(that)i(its)f(v)-5
+b(alue)37 b(is)g(not)f(n)m(ull;)k(if)d(the)g(colon)h(is)e(omitted,)k
+(the)150 4942 y(op)s(erator)31 b(tests)g(only)f(for)g(existence.)150
+5121 y Ft(${)p Fj(parameter)p Ft(:)p Fq(\000)p Fj(word)p
+Ft(})630 5230 y Fu(If)g Fr(parameter)37 b Fu(is)30 b(unset)g(or)h(n)m
+(ull,)f(the)h(expansion)f(of)g Fr(w)m(ord)k Fu(is)c(substituted.)40
+b(Otherwise,)630 5340 y(the)31 b(v)-5 b(alue)30 b(of)h
+Fr(parameter)37 b Fu(is)31 b(substituted.)p eop end
+%%Page: 26 32
+TeXDict begin 26 31 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(26)150 299
+y Ft(${)p Fj(parameter)p Ft(:=)p Fj(word)p Ft(})630 408
+y Fu(If)33 b Fr(parameter)40 b Fu(is)33 b(unset)f(or)h(n)m(ull,)h(the)f
+(expansion)g(of)g Fr(w)m(ord)j Fu(is)d(assigned)g(to)h
+Fr(parameter)p Fu(.)630 518 y(The)c(v)-5 b(alue)32 b(of)f
+Fr(parameter)38 b Fu(is)31 b(then)g(substituted.)42 b(P)m(ositional)33
+b(parameters)e(and)f(sp)s(ecial)630 628 y(parameters)h(ma)m(y)g(not)f
+(b)s(e)g(assigned)h(to)g(in)f(this)g(w)m(a)m(y)-8 b(.)150
+786 y Ft(${)p Fj(parameter)p Ft(:?)p Fj(word)p Ft(})630
+896 y Fu(If)26 b Fr(parameter)33 b Fu(is)26 b(n)m(ull)g(or)g(unset,)h
+(the)f(expansion)g(of)g Fr(w)m(ord)k Fu(\(or)c(a)h(message)g(to)g(that)
+f(e\013ect)630 1005 y(if)i Fr(w)m(ord)j Fu(is)d(not)g(presen)m(t\))h
+(is)f(written)g(to)h(the)f(standard)f(error)h(and)f(the)h(shell,)h(if)f
+(it)h(is)f(not)630 1115 y(in)m(teractiv)m(e,)33 b(exits.)42
+b(Otherwise,)30 b(the)h(v)-5 b(alue)31 b(of)f Fr(parameter)38
+b Fu(is)30 b(substituted.)150 1273 y Ft(${)p Fj(parameter)p
+Ft(:+)p Fj(word)p Ft(})630 1383 y Fu(If)35 b Fr(parameter)42
+b Fu(is)36 b(n)m(ull)f(or)h(unset,)g(nothing)g(is)f(substituted,)i
+(otherwise)e(the)h(expansion)630 1492 y(of)31 b Fr(w)m(ord)i
+Fu(is)e(substituted.)150 1650 y Ft(${)p Fj(parameter)p
+Ft(:)p Fj(offset)p Ft(})150 1760 y(${)p Fj(parameter)p
+Ft(:)p Fj(offset)p Ft(:)p Fj(lengt)o(h)p Ft(})630 1870
+y Fu(This)f(is)h(referred)f(to)h(as)g(Substring)f(Expansion.)41
+b(It)31 b(expands)f(to)h(up)f(to)h Fr(length)g Fu(c)m(harac-)630
+1979 y(ters)k(of)g(the)h(v)-5 b(alue)35 b(of)g Fr(parameter)42
+b Fu(starting)36 b(at)g(the)f(c)m(haracter)i(sp)s(eci\014ed)d(b)m(y)h
+Fr(o\013set)p Fu(.)55 b(If)630 2089 y Fr(parameter)32
+b Fu(is)26 b(`)p Ft(@)p Fu(',)g(an)f(indexed)g(arra)m(y)h(subscripted)e
+(b)m(y)h(`)p Ft(@)p Fu(')g(or)h(`)p Ft(*)p Fu(',)g(or)g(an)f(asso)s
+(ciativ)m(e)j(ar-)630 2198 y(ra)m(y)g(name,)h(the)f(results)g(di\013er)
+g(as)g(describ)s(ed)f(b)s(elo)m(w.)40 b(If)28 b Fr(length)g
+Fu(is)g(omitted,)i(it)f(expands)630 2308 y(to)e(the)g(substring)f(of)g
+(the)h(v)-5 b(alue)27 b(of)g Fr(parameter)33 b Fu(starting)28
+b(at)f(the)g(c)m(haracter)h(sp)s(eci\014ed)e(b)m(y)630
+2418 y Fr(o\013set)37 b Fu(and)d(extending)g(to)h(the)f(end)g(of)g(the)
+g(v)-5 b(alue.)53 b Fr(length)34 b Fu(and)g Fr(o\013set)j
+Fu(are)e(arithmetic)630 2527 y(expressions)30 b(\(see)h(Section)g(6.5)h
+([Shell)e(Arithmetic],)i(page)f(93\).)630 2661 y(If)39
+b Fr(o\013set)k Fu(ev)-5 b(aluates)41 b(to)f(a)g(n)m(um)m(b)s(er)f
+(less)h(than)f(zero,)k(the)d(v)-5 b(alue)40 b(is)g(used)e(as)i(an)g
+(o\013set)630 2771 y(in)33 b(c)m(haracters)i(from)f(the)f(end)g(of)h
+(the)g(v)-5 b(alue)34 b(of)g Fr(parameter)p Fu(.)51 b(If)33
+b Fr(length)h Fu(ev)-5 b(aluates)35 b(to)g(a)630 2880
+y(n)m(um)m(b)s(er)23 b(less)h(than)g(zero,)j(it)d(is)h(in)m(terpreted)f
+(as)g(an)h(o\013set)g(in)f(c)m(haracters)h(from)f(the)g(end)g(of)630
+2990 y(the)31 b(v)-5 b(alue)31 b(of)g Fr(parameter)38
+b Fu(rather)30 b(than)h(a)g(n)m(um)m(b)s(er)f(of)g(c)m(haracters,)j
+(and)d(the)h(expansion)630 3099 y(is)39 b(the)g(c)m(haracters)i(b)s(et)
+m(w)m(een)f Fr(o\013set)i Fu(and)c(that)i(result.)67
+b(Note)40 b(that)g(a)g(negativ)m(e)h(o\013set)630 3209
+y(m)m(ust)27 b(b)s(e)g(separated)g(from)g(the)g(colon)i(b)m(y)e(at)h
+(least)g(one)f(space)h(to)g(a)m(v)m(oid)h(b)s(eing)e(confused)630
+3319 y(with)j(the)h(`)p Ft(:-)p Fu(')f(expansion.)630
+3453 y(Here)43 b(are)g(some)f(examples)h(illustrating)g(substring)f
+(expansion)g(on)g(parameters)h(and)630 3562 y(subscripted)29
+b(arra)m(ys:)630 3696 y Ft($)47 b(string=01234567890abcdefgh)630
+3806 y($)g(echo)g(${string:7})630 3915 y(7890abcdefgh)630
+4025 y($)g(echo)g(${string:7:0})630 4244 y($)g(echo)g(${string:7:2})630
+4354 y(78)630 4463 y($)g(echo)g(${string:7:-2})630 4573
+y(7890abcdef)630 4682 y($)g(echo)g(${string:)e(-7})630
+4792 y(bcdefgh)630 4902 y($)i(echo)g(${string:)e(-7:0})630
+5121 y($)i(echo)g(${string:)e(-7:2})630 5230 y(bc)630
+5340 y($)i(echo)g(${string:)e(-7:-2})p eop end
+%%Page: 27 33
+TeXDict begin 27 32 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(27)630 299
+y Ft(bcdef)630 408 y($)47 b(set)g(--)h(01234567890abcdefgh)630
+518 y($)f(echo)g(${1:7})630 628 y(7890abcdefgh)630 737
+y($)g(echo)g(${1:7:0})630 956 y($)g(echo)g(${1:7:2})630
+1066 y(78)630 1176 y($)g(echo)g(${1:7:-2})630 1285 y(7890abcdef)630
+1395 y($)g(echo)g(${1:)g(-7})630 1504 y(bcdefgh)630 1614
+y($)g(echo)g(${1:)g(-7:0})630 1833 y($)g(echo)g(${1:)g(-7:2})630
+1943 y(bc)630 2052 y($)g(echo)g(${1:)g(-7:-2})630 2162
+y(bcdef)630 2271 y($)g(array[0]=01234567890abcdef)o(gh)630
+2381 y($)g(echo)g(${array[0]:7})630 2491 y(7890abcdefgh)630
+2600 y($)g(echo)g(${array[0]:7:0})630 2819 y($)g(echo)g
+(${array[0]:7:2})630 2929 y(78)630 3039 y($)g(echo)g(${array[0]:7:-2})
+630 3148 y(7890abcdef)630 3258 y($)g(echo)g(${array[0]:)e(-7})630
+3367 y(bcdefgh)630 3477 y($)i(echo)g(${array[0]:)e(-7:0})630
+3696 y($)i(echo)g(${array[0]:)e(-7:2})630 3806 y(bc)630
+3915 y($)i(echo)g(${array[0]:)e(-7:-2})630 4025 y(bcdef)630
+4171 y Fu(If)22 b Fr(parameter)30 b Fu(is)23 b(`)p Ft(@)p
+Fu(',)i(the)e(result)g(is)g Fr(length)h Fu(p)s(ositional)f(parameters)h
+(b)s(eginning)e(at)i Fr(o\013set)p Fu(.)630 4281 y(A)36
+b(negativ)m(e)j Fr(o\013set)g Fu(is)e(tak)m(en)g(relativ)m(e)i(to)e
+(one)g(greater)g(than)f(the)h(greatest)h(p)s(ositional)630
+4390 y(parameter,)29 b(so)f(an)g(o\013set)h(of)f(-1)g(ev)-5
+b(aluates)30 b(to)e(the)g(last)h(p)s(ositional)g(parameter.)40
+b(It)28 b(is)g(an)630 4500 y(expansion)i(error)g(if)h
+Fr(length)f Fu(ev)-5 b(aluates)32 b(to)f(a)g(n)m(um)m(b)s(er)e(less)i
+(than)f(zero.)630 4646 y(The)i(follo)m(wing)i(examples)f(illustrate)h
+(substring)d(expansion)i(using)f(p)s(ositional)h(param-)630
+4755 y(eters:)630 4902 y Ft($)47 b(set)g(--)h(1)f(2)g(3)h(4)f(5)h(6)f
+(7)h(8)f(9)h(0)f(a)h(b)f(c)g(d)h(e)f(f)h(g)f(h)630 5011
+y($)g(echo)g(${@:7})630 5121 y(7)g(8)h(9)f(0)h(a)f(b)h(c)f(d)h(e)f(f)h
+(g)f(h)630 5230 y($)g(echo)g(${@:7:0})p eop end
+%%Page: 28 34
+TeXDict begin 28 33 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(28)630 299
+y Ft($)47 b(echo)g(${@:7:2})630 408 y(7)g(8)630 518 y($)g(echo)g
+(${@:7:-2})630 628 y(bash:)f(-2:)h(substring)f(expression)f(<)i(0)630
+737 y($)g(echo)g(${@:)g(-7:2})630 847 y(b)g(c)630 956
+y($)g(echo)g(${@:0})630 1066 y(./bash)f(1)i(2)f(3)g(4)h(5)f(6)h(7)f(8)h
+(9)f(0)h(a)f(b)h(c)f(d)g(e)h(f)f(g)h(h)630 1176 y($)f(echo)g(${@:0:2})
+630 1285 y(./bash)f(1)630 1395 y($)h(echo)g(${@:)g(-7:0})630
+1677 y Fu(If)36 b Fr(parameter)43 b Fu(is)36 b(an)g(indexed)g(arra)m(y)
+g(name)g(subscripted)f(b)m(y)h(`)p Ft(@)p Fu(')g(or)h(`)p
+Ft(*)p Fu(',)h(the)e(result)g(is)630 1786 y(the)j Fr(length)g
+Fu(mem)m(b)s(ers)f(of)h(the)f(arra)m(y)i(b)s(eginning)d(with)i
+Ft(${)p Fj(parameter)p Ft([)p Fj(offset)p Ft(]})p Fu(.)60
+b(A)630 1896 y(negativ)m(e)33 b Fr(o\013set)g Fu(is)e(tak)m(en)h
+(relativ)m(e)g(to)g(one)f(greater)g(than)g(the)f(maxim)m(um)h(index)f
+(of)h(the)630 2005 y(sp)s(eci\014ed)38 b(arra)m(y)-8
+b(.)65 b(It)38 b(is)g(an)h(expansion)f(error)f(if)i Fr(length)f
+Fu(ev)-5 b(aluates)40 b(to)f(a)g(n)m(um)m(b)s(er)e(less)630
+2115 y(than)30 b(zero.)630 2287 y(These)23 b(examples)i(sho)m(w)e(ho)m
+(w)h(y)m(ou)g(can)g(use)f(substring)f(expansion)i(with)f(indexed)g
+(arra)m(ys:)630 2459 y Ft($)47 b(array=\(0)f(1)h(2)h(3)f(4)h(5)f(6)h(7)
+f(8)h(9)f(0)h(a)f(b)g(c)h(d)f(e)h(f)f(g)h(h\))630 2569
+y($)f(echo)g(${array[@]:7})630 2679 y(7)g(8)h(9)f(0)h(a)f(b)h(c)f(d)h
+(e)f(f)h(g)f(h)630 2788 y($)g(echo)g(${array[@]:7:2})630
+2898 y(7)g(8)630 3007 y($)g(echo)g(${array[@]:)e(-7:2})630
+3117 y(b)i(c)630 3226 y($)g(echo)g(${array[@]:)e(-7:-2})630
+3336 y(bash:)h(-2:)h(substring)f(expression)f(<)i(0)630
+3446 y($)g(echo)g(${array[@]:0})630 3555 y(0)g(1)h(2)f(3)h(4)f(5)h(6)f
+(7)h(8)f(9)h(0)f(a)g(b)h(c)f(d)h(e)f(f)h(g)f(h)630 3665
+y($)g(echo)g(${array[@]:0:2})630 3774 y(0)g(1)630 3884
+y($)g(echo)g(${array[@]:)e(-7:0})630 4166 y Fu(Substring)25
+b(expansion)g(applied)h(to)h(an)f(asso)s(ciativ)m(e)j(arra)m(y)d(pro)s
+(duces)f(unde\014ned)f(results.)630 4338 y(Substring)32
+b(indexing)i(is)f(zero-based)i(unless)e(the)h(p)s(ositional)g
+(parameters)g(are)g(used,)g(in)630 4448 y(whic)m(h)29
+b(case)i(the)f(indexing)g(starts)g(at)g(1)g(b)m(y)g(default.)41
+b(If)29 b Fr(o\013set)k Fu(is)d(0,)g(and)f(the)h(p)s(ositional)630
+4557 y(parameters)h(are)f(used,)g Ft($0)g Fu(is)g(pre\014xed)g(to)h
+(the)f(list.)150 4792 y Ft(${!)p Fj(prefix)p Ft(*})150
+4902 y(${!)p Fj(prefix)p Ft(@})630 5011 y Fu(Expands)24
+b(to)h(the)g(names)g(of)g(v)-5 b(ariables)26 b(whose)f(names)f(b)s
+(egin)h(with)f Fr(pre\014x)p Fu(,)i(separated)f(b)m(y)630
+5121 y(the)k(\014rst)f(c)m(haracter)j(of)e(the)g Ft(IFS)f
+Fu(sp)s(ecial)i(v)-5 b(ariable.)41 b(When)29 b(`)p Ft(@)p
+Fu(')g(is)g(used)f(and)h(the)g(expan-)630 5230 y(sion)35
+b(app)s(ears)g(within)f(double)h(quotes,)i(eac)m(h)f(v)-5
+b(ariable)36 b(name)f(expands)g(to)g(a)h(separate)630
+5340 y(w)m(ord.)p eop end
+%%Page: 29 35
+TeXDict begin 29 34 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(29)150 299
+y Ft(${!)p Fj(name)p Ft([@]})150 408 y(${!)p Fj(name)p
+Ft([*]})630 518 y Fu(If)26 b Fr(name)32 b Fu(is)27 b(an)f(arra)m(y)h(v)
+-5 b(ariable,)29 b(expands)d(to)h(the)g(list)g(of)g(arra)m(y)g(indices)
+g(\(k)m(eys\))h(assigned)630 628 y(in)c Fr(name)p Fu(.)39
+b(If)24 b Fr(name)30 b Fu(is)24 b(not)h(an)f(arra)m(y)-8
+b(,)27 b(expands)c(to)j(0)f(if)f Fr(name)30 b Fu(is)24
+b(set)h(and)f(n)m(ull)g(otherwise.)630 737 y(When)39
+b(`)p Ft(@)p Fu(')h(is)f(used)g(and)f(the)i(expansion)f(app)s(ears)g
+(within)f(double)h(quotes,)k(eac)m(h)d(k)m(ey)630 847
+y(expands)30 b(to)h(a)f(separate)i(w)m(ord.)150 1011
+y Ft(${#)p Fj(parameter)p Ft(})630 1121 y Fu(The)40 b(length)g(in)g(c)m
+(haracters)i(of)e(the)h(expanded)e(v)-5 b(alue)41 b(of)f
+Fr(parameter)47 b Fu(is)40 b(substituted.)630 1230 y(If)i
+Fr(parameter)50 b Fu(is)43 b(`)p Ft(*)p Fu(')g(or)g(`)p
+Ft(@)p Fu(',)k(the)c(v)-5 b(alue)43 b(substituted)f(is)h(the)g(n)m(um)m
+(b)s(er)f(of)h(p)s(ositional)630 1340 y(parameters.)i(If)32
+b Fr(parameter)38 b Fu(is)32 b(an)g(arra)m(y)g(name)g(subscripted)f(b)m
+(y)g(`)p Ft(*)p Fu(')h(or)g(`)p Ft(@)p Fu(',)g(the)g(v)-5
+b(alue)630 1450 y(substituted)30 b(is)h(the)g(n)m(um)m(b)s(er)e(of)i
+(elemen)m(ts)i(in)d(the)h(arra)m(y)-8 b(.)43 b(If)30
+b Fr(parameter)38 b Fu(is)31 b(an)f(indexed)630 1559
+y(arra)m(y)37 b(name)g(subscripted)f(b)m(y)h(a)g(negativ)m(e)i(n)m(um)m
+(b)s(er,)f(that)f(n)m(um)m(b)s(er)f(is)g(in)m(terpreted)i(as)630
+1669 y(relativ)m(e)47 b(to)g(one)e(greater)i(than)e(the)h(maxim)m(um)f
+(index)g(of)g Fr(parameter)p Fu(,)50 b(so)c(negativ)m(e)630
+1778 y(indices)30 b(coun)m(t)h(bac)m(k)g(from)f(the)h(end)e(of)i(the)f
+(arra)m(y)-8 b(,)32 b(and)e(an)g(index)g(of)g(-1)h(references)g(the)630
+1888 y(last)g(elemen)m(t.)150 2052 y Ft(${)p Fj(parameter)p
+Ft(#)p Fj(word)p Ft(})150 2162 y(${)p Fj(parameter)p
+Ft(##)p Fj(word)p Ft(})630 2271 y Fu(The)43 b Fr(w)m(ord)k
+Fu(is)d(expanded)f(to)h(pro)s(duce)f(a)h(pattern)g(and)f(matc)m(hed)i
+(according)f(to)h(the)630 2381 y(rules)31 b(describ)s(ed)g(b)s(elo)m(w)
+h(\(see)h(Section)g(3.5.8.1)h([P)m(attern)g(Matc)m(hing],)g(page)f
+(33\).)46 b(If)32 b(the)630 2491 y(pattern)37 b(matc)m(hes)h(the)f(b)s
+(eginning)f(of)h(the)g(expanded)f(v)-5 b(alue)38 b(of)f
+Fr(parameter)p Fu(,)i(then)e(the)630 2600 y(result)f(of)h(the)f
+(expansion)h(is)f(the)h(expanded)e(v)-5 b(alue)37 b(of)g
+Fr(parameter)43 b Fu(with)36 b(the)h(shortest)630 2710
+y(matc)m(hing)31 b(pattern)e(\(the)h(`)p Ft(#)p Fu(')g(case\))h(or)e
+(the)h(longest)h(matc)m(hing)f(pattern)g(\(the)g(`)p
+Ft(##)p Fu(')g(case\))630 2819 y(deleted.)49 b(If)32
+b Fr(parameter)40 b Fu(is)33 b(`)p Ft(@)p Fu(')g(or)g(`)p
+Ft(*)p Fu(',)h(the)f(pattern)g(remo)m(v)-5 b(al)34 b(op)s(eration)g(is)
+f(applied)f(to)630 2929 y(eac)m(h)38 b(p)s(ositional)g(parameter)g(in)f
+(turn,)h(and)e(the)h(expansion)g(is)h(the)f(resultan)m(t)h(list.)61
+b(If)630 3039 y Fr(parameter)38 b Fu(is)32 b(an)f(arra)m(y)h(v)-5
+b(ariable)32 b(subscripted)e(with)h(`)p Ft(@)p Fu(')g(or)h(`)p
+Ft(*)p Fu(',)g(the)f(pattern)h(remo)m(v)-5 b(al)630 3148
+y(op)s(eration)30 b(is)g(applied)f(to)i(eac)m(h)g(mem)m(b)s(er)e(of)h
+(the)g(arra)m(y)g(in)f(turn,)g(and)g(the)h(expansion)g(is)630
+3258 y(the)h(resultan)m(t)g(list.)150 3422 y Ft(${)p
+Fj(parameter)p Ft(\045)p Fj(word)p Ft(})150 3532 y(${)p
+Fj(parameter)p Ft(\045\045)p Fj(word)p Ft(})630 3641
+y Fu(The)43 b Fr(w)m(ord)k Fu(is)d(expanded)f(to)h(pro)s(duce)f(a)h
+(pattern)g(and)f(matc)m(hed)i(according)f(to)h(the)630
+3751 y(rules)f(describ)s(ed)g(b)s(elo)m(w)h(\(see)h(Section)g(3.5.8.1)h
+([P)m(attern)f(Matc)m(hing],)51 b(page)45 b(33\).)85
+b(If)630 3861 y(the)43 b(pattern)g(matc)m(hes)h(a)g(trailing)g(p)s
+(ortion)e(of)h(the)g(expanded)g(v)-5 b(alue)43 b(of)g
+Fr(parameter)p Fu(,)630 3970 y(then)c(the)g(result)g(of)h(the)f
+(expansion)g(is)h(the)f(v)-5 b(alue)40 b(of)f Fr(parameter)46
+b Fu(with)39 b(the)h(shortest)630 4080 y(matc)m(hing)31
+b(pattern)e(\(the)h(`)p Ft(\045)p Fu(')g(case\))h(or)e(the)h(longest)h
+(matc)m(hing)f(pattern)g(\(the)g(`)p Ft(\045\045)p Fu(')g(case\))630
+4189 y(deleted.)49 b(If)32 b Fr(parameter)40 b Fu(is)33
+b(`)p Ft(@)p Fu(')g(or)g(`)p Ft(*)p Fu(',)h(the)f(pattern)g(remo)m(v)-5
+b(al)34 b(op)s(eration)g(is)f(applied)f(to)630 4299 y(eac)m(h)38
+b(p)s(ositional)g(parameter)g(in)f(turn,)h(and)e(the)h(expansion)g(is)h
+(the)f(resultan)m(t)h(list.)61 b(If)630 4408 y Fr(parameter)38
+b Fu(is)32 b(an)f(arra)m(y)h(v)-5 b(ariable)32 b(subscripted)e(with)h
+(`)p Ft(@)p Fu(')g(or)h(`)p Ft(*)p Fu(',)g(the)f(pattern)h(remo)m(v)-5
+b(al)630 4518 y(op)s(eration)30 b(is)g(applied)f(to)i(eac)m(h)g(mem)m
+(b)s(er)e(of)h(the)g(arra)m(y)g(in)f(turn,)g(and)g(the)h(expansion)g
+(is)630 4628 y(the)h(resultan)m(t)g(list.)150 4792 y
+Ft(${)p Fj(parameter)p Ft(/)p Fj(pattern)p Ft(/)p Fj(stri)o(ng)p
+Ft(})630 4902 y Fu(The)37 b Fr(pattern)g Fu(is)g(expanded)g(to)h(pro)s
+(duce)e(a)h(pattern)g(just)g(as)h(in)e(\014lename)i(expansion.)630
+5011 y Fr(P)m(arameter)46 b Fu(is)38 b(expanded)f(and)g(the)i(longest)g
+(matc)m(h)g(of)f Fr(pattern)g Fu(against)h(its)f(v)-5
+b(alue)39 b(is)630 5121 y(replaced)31 b(with)g Fr(string)p
+Fu(.)42 b(The)30 b(matc)m(h)h(is)g(p)s(erformed)f(according)h(to)h(the)
+f(rules)f(describ)s(ed)630 5230 y(b)s(elo)m(w)f(\(see)h(Section)g
+(3.5.8.1)h([P)m(attern)g(Matc)m(hing],)g(page)f(33\).)41
+b(If)29 b Fr(pattern)g Fu(b)s(egins)f(with)630 5340 y(`)p
+Ft(/)p Fu(',)43 b(all)e(matc)m(hes)g(of)f Fr(pattern)g
+Fu(are)h(replaced)f(with)g Fr(string)p Fu(.)69 b(Normally)41
+b(only)f(the)h(\014rst)p eop end
+%%Page: 30 36
+TeXDict begin 30 35 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(30)630 299
+y(matc)m(h)28 b(is)f(replaced.)40 b(If)26 b Fr(pattern)h
+Fu(b)s(egins)f(with)h(`)p Ft(#)p Fu(',)h(it)f(m)m(ust)g(matc)m(h)h(at)g
+(the)f(b)s(eginning)f(of)630 408 y(the)32 b(expanded)f(v)-5
+b(alue)32 b(of)g Fr(parameter)p Fu(.)45 b(If)31 b Fr(pattern)h
+Fu(b)s(egins)f(with)g(`)p Ft(\045)p Fu(',)i(it)f(m)m(ust)g(matc)m(h)g
+(at)630 518 y(the)24 b(end)f(of)h(the)h(expanded)e(v)-5
+b(alue)24 b(of)g Fr(parameter)p Fu(.)39 b(If)24 b Fr(string)31
+b Fu(is)24 b(n)m(ull,)i(matc)m(hes)f(of)f Fr(pattern)630
+628 y Fu(are)36 b(deleted)g(and)f(the)g Ft(/)g Fu(follo)m(wing)i
+Fr(pattern)e Fu(ma)m(y)h(b)s(e)f(omitted.)57 b(If)34
+b(the)i Ft(nocasematch)630 737 y Fu(shell)31 b(option)h(\(see)g(the)g
+(description)f(of)g Ft(shopt)f Fu(in)h(Section)h(4.3.2)h([The)e(Shopt)f
+(Builtin],)630 847 y(page)45 b(66\))h(is)f(enabled,)j(the)d(matc)m(h)g
+(is)g(p)s(erformed)e(without)i(regard)f(to)h(the)g(case)h(of)630
+956 y(alphab)s(etic)36 b(c)m(haracters.)56 b(If)34 b
+Fr(parameter)42 b Fu(is)36 b(`)p Ft(@)p Fu(')f(or)g(`)p
+Ft(*)p Fu(',)h(the)g(substitution)e(op)s(eration)i(is)630
+1066 y(applied)26 b(to)g(eac)m(h)h(p)s(ositional)f(parameter)h(in)e
+(turn,)h(and)f(the)h(expansion)g(is)f(the)h(resultan)m(t)630
+1176 y(list.)38 b(If)21 b Fr(parameter)28 b Fu(is)22
+b(an)f(arra)m(y)h(v)-5 b(ariable)22 b(subscripted)e(with)h(`)p
+Ft(@)p Fu(')g(or)g(`)p Ft(*)p Fu(',)j(the)d(substitution)630
+1285 y(op)s(eration)30 b(is)g(applied)f(to)i(eac)m(h)g(mem)m(b)s(er)e
+(of)h(the)g(arra)m(y)g(in)f(turn,)g(and)g(the)h(expansion)g(is)630
+1395 y(the)h(resultan)m(t)g(list.)150 1551 y Ft(${)p
+Fj(parameter)p Ft(^)p Fj(pattern)p Ft(})150 1661 y(${)p
+Fj(parameter)p Ft(^^)p Fj(pattern)p Ft(})150 1771 y(${)p
+Fj(parameter)p Ft(,)p Fj(pattern)p Ft(})150 1880 y(${)p
+Fj(parameter)p Ft(,,)p Fj(pattern)p Ft(})630 1990 y Fu(This)36
+b(expansion)g(mo)s(di\014es)g(the)g(case)i(of)f(alphab)s(etic)g(c)m
+(haracters)h(in)e Fr(parameter)p Fu(.)59 b(The)630 2099
+y Fr(pattern)33 b Fu(is)g(expanded)e(to)j(pro)s(duce)d(a)j(pattern)e
+(just)g(as)h(in)g(\014lename)g(expansion.)47 b(Eac)m(h)630
+2209 y(c)m(haracter)32 b(in)e(the)g(expanded)f(v)-5 b(alue)31
+b(of)f Fr(parameter)37 b Fu(is)30 b(tested)h(against)h
+Fr(pattern)p Fu(,)e(and,)g(if)630 2318 y(it)j(matc)m(hes)h(the)g
+(pattern,)f(its)h(case)g(is)f(con)m(v)m(erted.)49 b(The)33
+b(pattern)g(should)f(not)h(attempt)630 2428 y(to)f(matc)m(h)g(more)f
+(than)g(one)g(c)m(haracter.)44 b(The)30 b(`)p Ft(^)p
+Fu(')i(op)s(erator)f(con)m(v)m(erts)h(lo)m(w)m(ercase)i(letters)630
+2538 y(matc)m(hing)i Fr(pattern)f Fu(to)h(upp)s(ercase;)h(the)e(`)p
+Ft(,)p Fu(')g(op)s(erator)g(con)m(v)m(erts)i(matc)m(hing)f(upp)s
+(ercase)630 2647 y(letters)e(to)f(lo)m(w)m(ercase.)50
+b(The)32 b(`)p Ft(^^)p Fu(')h(and)f(`)p Ft(,,)p Fu(')g(expansions)h
+(con)m(v)m(ert)h(eac)m(h)g(matc)m(hed)f(c)m(har-)630
+2757 y(acter)c(in)f(the)h(expanded)e(v)-5 b(alue;)30
+b(the)e(`)p Ft(^)p Fu(')g(and)g(`)p Ft(,)p Fu(')g(expansions)g(matc)m
+(h)h(and)f(con)m(v)m(ert)i(only)630 2866 y(the)37 b(\014rst)g(c)m
+(haracter)i(in)e(the)g(expanded)g(v)-5 b(alue.)61 b(If)37
+b Fr(pattern)g Fu(is)h(omitted,)i(it)e(is)f(treated)630
+2976 y(lik)m(e)h(a)f(`)p Ft(?)p Fu(',)i(whic)m(h)d(matc)m(hes)i(ev)m
+(ery)f(c)m(haracter.)61 b(If)37 b Fr(parameter)43 b Fu(is)37
+b(`)p Ft(@)p Fu(')g(or)f(`)p Ft(*)p Fu(',)j(the)e(case)630
+3086 y(mo)s(di\014cation)29 b(op)s(eration)f(is)g(applied)g(to)h(eac)m
+(h)h(p)s(ositional)f(parameter)f(in)g(turn,)g(and)g(the)630
+3195 y(expansion)38 b(is)g(the)g(resultan)m(t)h(list.)65
+b(If)37 b Fr(parameter)46 b Fu(is)38 b(an)g(arra)m(y)g(v)-5
+b(ariable)39 b(subscripted)630 3305 y(with)26 b(`)p Ft(@)p
+Fu(')f(or)h(`)p Ft(*)p Fu(',)h(the)f(case)h(mo)s(di\014cation)f(op)s
+(eration)h(is)e(applied)h(to)h(eac)m(h)g(mem)m(b)s(er)e(of)h(the)630
+3414 y(arra)m(y)31 b(in)f(turn,)f(and)h(the)h(expansion)f(is)g(the)h
+(resultan)m(t)g(list.)150 3571 y Ft(${)p Fj(parameter)p
+Ft(@)p Fj(operator)p Ft(})630 3680 y Fu(The)d(expansion)h(is)f(either)h
+(a)g(transformation)g(of)g(the)g(v)-5 b(alue)29 b(of)g
+Fr(parameter)35 b Fu(or)29 b(informa-)630 3790 y(tion)e(ab)s(out)f
+Fr(parameter)33 b Fu(itself,)28 b(dep)s(ending)c(on)i(the)h(v)-5
+b(alue)26 b(of)h Fr(op)s(erator)p Fu(.)39 b(Eac)m(h)27
+b Fr(op)s(erator)630 3900 y Fu(is)j(a)h(single)g(letter:)630
+4056 y Ft(U)432 b Fu(The)31 b(expansion)g(is)g(a)g(string)h(that)f(is)h
+(the)f(v)-5 b(alue)32 b(of)f Fr(parameter)38 b Fu(with)31
+b(lo)m(w-)1110 4166 y(ercase)g(alphab)s(etic)g(c)m(haracters)h(con)m(v)
+m(erted)g(to)f(upp)s(ercase.)630 4322 y Ft(u)432 b Fu(The)34
+b(expansion)g(is)g(a)h(string)f(that)h(is)g(the)f(v)-5
+b(alue)35 b(of)f Fr(parameter)42 b Fu(with)34 b(the)1110
+4432 y(\014rst)c(c)m(haracter)i(con)m(v)m(erted)f(to)h(upp)s(ercase,)d
+(if)i(it)g(is)f(alphab)s(etic.)630 4589 y Ft(L)432 b
+Fu(The)33 b(expansion)h(is)g(a)g(string)g(that)h(is)f(the)g(v)-5
+b(alue)34 b(of)g Fr(parameter)41 b Fu(with)34 b(up-)1110
+4698 y(p)s(ercase)c(alphab)s(etic)h(c)m(haracters)h(con)m(v)m(erted)g
+(to)f(lo)m(w)m(ercase.)630 4855 y Ft(Q)432 b Fu(The)30
+b(expansion)h(is)g(a)g(string)f(that)i(is)f(the)g(v)-5
+b(alue)31 b(of)g Fr(parameter)37 b Fu(quoted)31 b(in)1110
+4964 y(a)g(format)f(that)h(can)g(b)s(e)f(reused)f(as)i(input.)630
+5121 y Ft(E)432 b Fu(The)27 b(expansion)g(is)g(a)g(string)h(that)f(is)h
+(the)f(v)-5 b(alue)28 b(of)f Fr(parameter)34 b Fu(with)27
+b(bac)m(k-)1110 5230 y(slash)e(escap)s(e)h(sequences)f(expanded)g(as)g
+(with)g(the)h Ft($'...)o(')e Fu(quoting)i(mec)m(h-)1110
+5340 y(anism.)p eop end
+%%Page: 31 37
+TeXDict begin 31 36 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(31)630 299
+y Ft(P)432 b Fu(The)22 b(expansion)h(is)g(a)g(string)g(that)g(is)g(the)
+g(result)g(of)g(expanding)f(the)h(v)-5 b(alue)24 b(of)1110
+408 y Fr(parameter)31 b Fu(as)24 b(if)f(it)h(w)m(ere)g(a)g(prompt)f
+(string)h(\(see)g(Section)h(6.9)g([Con)m(trolling)1110
+518 y(the)31 b(Prompt],)f(page)h(98\).)630 676 y Ft(A)432
+b Fu(The)24 b(expansion)g(is)g(a)h(string)f(in)g(the)g(form)g(of)h(an)f
+(assignmen)m(t)h(statemen)m(t)h(or)1110 785 y Ft(declare)h
+Fu(command)i(that,)h(if)f(ev)-5 b(aluated,)31 b(will)e(recreate)i
+Fr(parameter)36 b Fu(with)1110 895 y(its)31 b(attributes)g(and)e(v)-5
+b(alue.)630 1052 y Ft(K)432 b Fu(Pro)s(duces)33 b(a)i(p)s
+(ossibly-quoted)e(v)m(ersion)i(of)f(the)h(v)-5 b(alue)34
+b(of)h Fr(parameter)p Fu(,)g(ex-)1110 1162 y(cept)46
+b(that)h(it)f(prin)m(ts)f(the)h(v)-5 b(alues)47 b(of)f(indexed)f(and)g
+(asso)s(ciativ)m(e)k(arra)m(ys)1110 1271 y(as)37 b(a)g(sequence)f(of)h
+(quoted)g(k)m(ey-v)-5 b(alue)38 b(pairs)e(\(see)h(Section)h(6.7)f
+([Arra)m(ys],)1110 1381 y(page)31 b(95\).)630 1539 y
+Ft(a)432 b Fu(The)30 b(expansion)g(is)g(a)h(string)f(consisting)h(of)g
+(\015ag)g(v)-5 b(alues)30 b(represen)m(ting)h Fr(pa-)1110
+1648 y(rameter)7 b Fu('s)31 b(attributes.)630 1806 y(If)e
+Fr(parameter)37 b Fu(is)30 b(`)p Ft(@)p Fu(')g(or)g(`)p
+Ft(*)p Fu(',)g(the)g(op)s(eration)g(is)g(applied)f(to)i(eac)m(h)g(p)s
+(ositional)f(parameter)630 1915 y(in)24 b(turn,)g(and)f(the)h
+(expansion)g(is)g(the)g(resultan)m(t)h(list.)39 b(If)23
+b Fr(parameter)31 b Fu(is)24 b(an)g(arra)m(y)g(v)-5 b(ariable)630
+2025 y(subscripted)24 b(with)h(`)p Ft(@)p Fu(')h(or)g(`)p
+Ft(*)p Fu(',)h(the)e(op)s(eration)h(is)g(applied)f(to)h(eac)m(h)h(mem)m
+(b)s(er)e(of)h(the)f(arra)m(y)630 2134 y(in)30 b(turn,)g(and)f(the)i
+(expansion)f(is)h(the)f(resultan)m(t)h(list.)630 2268
+y(The)c(result)h(of)g(the)f(expansion)h(is)g(sub)5 b(ject)27
+b(to)h(w)m(ord)g(splitting)g(and)f(\014lename)h(expansion)630
+2378 y(as)j(describ)s(ed)e(b)s(elo)m(w.)150 2575 y Fk(3.5.4)63
+b(Command)41 b(Substitution)150 2722 y Fu(Command)f(substitution)h
+(allo)m(ws)i(the)e(output)g(of)h(a)f(command)g(to)h(replace)g(the)g
+(command)f(itself.)150 2831 y(Command)29 b(substitution)h(o)s(ccurs)h
+(when)e(a)i(command)f(is)g(enclosed)h(as)g(follo)m(ws:)390
+2965 y Ft($\()p Fj(command)p Ft(\))150 3098 y Fu(or)390
+3232 y Ft(`)p Fj(command)p Ft(`)150 3366 y Fu(Bash)20
+b(p)s(erforms)f(the)i(expansion)f(b)m(y)g(executing)i
+Fr(command)h Fu(in)d(a)h(subshell)e(en)m(vironmen)m(t)i(and)f
+(replacing)150 3475 y(the)40 b(command)g(substitution)f(with)h(the)g
+(standard)f(output)g(of)h(the)g(command,)i(with)e(an)m(y)g(trailing)150
+3585 y(newlines)e(deleted.)64 b(Em)m(b)s(edded)37 b(newlines)h(are)g
+(not)g(deleted,)j(but)d(they)g(ma)m(y)h(b)s(e)e(remo)m(v)m(ed)i(during)
+150 3694 y(w)m(ord)30 b(splitting.)42 b(The)30 b(command)g
+(substitution)h Ft($\(cat)e Fj(file)p Ft(\))g Fu(can)h(b)s(e)g
+(replaced)h(b)m(y)g(the)f(equiv)-5 b(alen)m(t)150 3804
+y(but)30 b(faster)g Ft($\(<)g Fj(file)p Ft(\))p Fu(.)275
+3937 y(When)j(the)i(old-st)m(yle)h(bac)m(kquote)f(form)f(of)g
+(substitution)g(is)g(used,)h(bac)m(kslash)f(retains)h(its)f(literal)150
+4047 y(meaning)k(except)h(when)e(follo)m(w)m(ed)j(b)m(y)e(`)p
+Ft($)p Fu(',)j(`)p Ft(`)p Fu(',)f(or)e(`)p Ft(\\)p Fu('.)64
+b(The)38 b(\014rst)f(bac)m(kquote)j(not)e(preceded)g(b)m(y)g(a)150
+4157 y(bac)m(kslash)k(terminates)f(the)h(command)e(substitution.)72
+b(When)41 b(using)f(the)i Ft($\()p Fj(command)p Ft(\))c
+Fu(form,)43 b(all)150 4266 y(c)m(haracters)32 b(b)s(et)m(w)m(een)f(the)
+f(paren)m(theses)h(mak)m(e)g(up)f(the)g(command;)h(none)f(are)h
+(treated)g(sp)s(ecially)-8 b(.)275 4400 y(Command)22
+b(substitutions)g(ma)m(y)i(b)s(e)e(nested.)39 b(T)-8
+b(o)23 b(nest)g(when)f(using)h(the)g(bac)m(kquoted)h(form,)g(escap)s(e)
+150 4509 y(the)31 b(inner)e(bac)m(kquotes)j(with)e(bac)m(kslashes.)275
+4643 y(If)e(the)i(substitution)e(app)s(ears)h(within)g(double)f
+(quotes,)i(w)m(ord)f(splitting)h(and)f(\014lename)g(expansion)150
+4753 y(are)i(not)f(p)s(erformed)f(on)h(the)h(results.)150
+4950 y Fk(3.5.5)63 b(Arithmetic)40 b(Expansion)150 5097
+y Fu(Arithmetic)25 b(expansion)g(allo)m(ws)g(the)g(ev)-5
+b(aluation)26 b(of)f(an)f(arithmetic)i(expression)e(and)g(the)g
+(substitution)150 5206 y(of)31 b(the)f(result.)41 b(The)30
+b(format)g(for)g(arithmetic)i(expansion)e(is:)390 5340
+y Ft($\(\()47 b Fj(expression)e Ft(\)\))p eop end
+%%Page: 32 38
+TeXDict begin 32 37 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(32)275 299
+y(The)33 b(expression)g(is)h(treated)g(as)g(if)g(it)g(w)m(ere)g(within)
+f(double)h(quotes,)h(but)e(a)h(double)f(quote)h(inside)150
+408 y(the)k(paren)m(theses)g(is)g(not)g(treated)h(sp)s(ecially)-8
+b(.)65 b(All)38 b(tok)m(ens)h(in)f(the)g(expression)f(undergo)g
+(parameter)150 518 y(and)26 b(v)-5 b(ariable)28 b(expansion,)g(command)
+e(substitution,)i(and)e(quote)i(remo)m(v)-5 b(al.)41
+b(The)26 b(result)h(is)g(treated)h(as)150 628 y(the)j(arithmetic)g
+(expression)f(to)h(b)s(e)f(ev)-5 b(aluated.)42 b(Arithmetic)31
+b(expansions)g(ma)m(y)g(b)s(e)e(nested.)275 761 y(The)34
+b(ev)-5 b(aluation)37 b(is)f(p)s(erformed)e(according)i(to)g(the)g
+(rules)f(listed)h(b)s(elo)m(w)g(\(see)g(Section)g(6.5)h([Shell)150
+870 y(Arithmetic],)32 b(page)f(93\).)42 b(If)30 b(the)h(expression)f
+(is)g(in)m(v)-5 b(alid,)32 b(Bash)e(prin)m(ts)g(a)h(message)g
+(indicating)h(failure)150 980 y(to)f(the)g(standard)e(error)h(and)g(no)
+g(substitution)g(o)s(ccurs.)150 1177 y Fk(3.5.6)63 b(Pro)s(cess)42
+b(Substitution)150 1324 y Fu(Pro)s(cess)33 b(substitution)g(allo)m(ws)i
+(a)e(pro)s(cess's)g(input)f(or)h(output)g(to)h(b)s(e)f(referred)f(to)i
+(using)f(a)g(\014lename.)150 1433 y(It)d(tak)m(es)i(the)f(form)f(of)390
+1567 y Ft(<\()p Fj(list)p Ft(\))150 1700 y Fu(or)390
+1833 y Ft(>\()p Fj(list)p Ft(\))150 1966 y Fu(The)e(pro)s(cess)h
+Fr(list)j Fu(is)d(run)e(async)m(hronously)-8 b(,)30 b(and)e(its)i
+(input)e(or)h(output)f(app)s(ears)h(as)g(a)g(\014lename.)41
+b(This)150 2076 y(\014lename)25 b(is)g(passed)g(as)g(an)g(argumen)m(t)h
+(to)g(the)f(curren)m(t)g(command)g(as)g(the)g(result)g(of)g(the)h
+(expansion.)38 b(If)150 2186 y(the)28 b Ft(>\()p Fj(list)p
+Ft(\))d Fu(form)i(is)g(used,)h(writing)f(to)h(the)g(\014le)f(will)h
+(pro)m(vide)g(input)e(for)h Fr(list)p Fu(.)41 b(If)26
+b(the)i Ft(<\()p Fj(list)p Ft(\))d Fu(form)150 2295 y(is)g(used,)g(the)
+f(\014le)h(passed)f(as)h(an)f(argumen)m(t)h(should)e(b)s(e)h(read)h(to)
+g(obtain)g(the)f(output)g(of)h Fr(list)p Fu(.)40 b(Note)25
+b(that)150 2405 y(no)33 b(space)g(ma)m(y)g(app)s(ear)f(b)s(et)m(w)m
+(een)i(the)f Ft(<)f Fu(or)h Ft(>)f Fu(and)g(the)h(left)h(paren)m
+(thesis,)f(otherwise)h(the)f(construct)150 2514 y(w)m(ould)j(b)s(e)g
+(in)m(terpreted)g(as)h(a)f(redirection.)59 b(Pro)s(cess)36
+b(substitution)g(is)h(supp)s(orted)d(on)i(systems)g(that)150
+2624 y(supp)s(ort)29 b(named)h(pip)s(es)f(\()p Fm(fif)n(o)p
+Fu(s\))h(or)h(the)f Ft(/dev/fd)f Fu(metho)s(d)h(of)g(naming)g(op)s(en)g
+(\014les.)275 2757 y(When)36 b(a)m(v)-5 b(ailable,)40
+b(pro)s(cess)c(substitution)h(is)f(p)s(erformed)f(sim)m(ultaneously)i
+(with)g(parameter)g(and)150 2867 y(v)-5 b(ariable)31
+b(expansion,)g(command)f(substitution,)g(and)g(arithmetic)i(expansion.)
+150 3064 y Fk(3.5.7)63 b(W)-10 b(ord)41 b(Splitting)150
+3210 y Fu(The)30 b(shell)h(scans)g(the)g(results)f(of)h(parameter)g
+(expansion,)g(command)g(substitution,)g(and)f(arithmetic)150
+3320 y(expansion)g(that)h(did)f(not)g(o)s(ccur)h(within)e(double)h
+(quotes)h(for)f(w)m(ord)g(splitting.)275 3453 y(The)e(shell)g(treats)i
+(eac)m(h)g(c)m(haracter)g(of)f Ft($IFS)e Fu(as)i(a)g(delimiter,)h(and)e
+(splits)g(the)h(results)f(of)h(the)g(other)150 3563 y(expansions)22
+b(in)m(to)i(w)m(ords)e(using)h(these)g(c)m(haracters)h(as)f(\014eld)f
+(terminators.)39 b(If)22 b Ft(IFS)g Fu(is)h(unset,)h(or)e(its)h(v)-5
+b(alue)150 3672 y(is)36 b(exactly)j Ft(<space><tab><newline>)p
+Fu(,)32 b(the)37 b(default,)h(then)e(sequences)h(of)67
+b Ft(<space>)p Fu(,)36 b Ft(<tab>)p Fu(,)h(and)150 3782
+y Ft(<newline>)28 b Fu(at)k(the)f(b)s(eginning)f(and)h(end)f(of)h(the)g
+(results)g(of)g(the)g(previous)g(expansions)f(are)i(ignored,)150
+3892 y(and)k(an)m(y)h(sequence)h(of)f Ft(IFS)f Fu(c)m(haracters)i(not)f
+(at)h(the)f(b)s(eginning)f(or)h(end)f(serv)m(es)h(to)h(delimit)f(w)m
+(ords.)150 4001 y(If)43 b Ft(IFS)f Fu(has)h(a)h(v)-5
+b(alue)43 b(other)h(than)f(the)g(default,)k(then)c(sequences)h(of)f
+(the)h(whitespace)f(c)m(haracters)150 4111 y Ft(space)p
+Fu(,)29 b Ft(tab)p Fu(,)h(and)g Ft(newline)e Fu(are)j(ignored)g(at)g
+(the)f(b)s(eginning)g(and)g(end)g(of)g(the)h(w)m(ord,)f(as)h(long)g(as)
+g(the)150 4220 y(whitespace)c(c)m(haracter)h(is)f(in)f(the)g(v)-5
+b(alue)27 b(of)g Ft(IFS)e Fu(\(an)i Ft(IFS)e Fu(whitespace)i(c)m
+(haracter\).)42 b(An)m(y)26 b(c)m(haracter)i(in)150 4330
+y Ft(IFS)c Fu(that)h(is)g(not)f Ft(IFS)g Fu(whitespace,)j(along)f(with)
+e(an)m(y)h(adjacen)m(t)h Ft(IFS)e Fu(whitespace)h(c)m(haracters,)i
+(delimits)150 4440 y(a)k(\014eld.)40 b(A)31 b(sequence)g(of)f
+Ft(IFS)g Fu(whitespace)h(c)m(haracters)h(is)e(also)h(treated)h(as)f(a)f
+(delimiter.)42 b(If)30 b(the)g(v)-5 b(alue)150 4549 y(of)31
+b Ft(IFS)e Fu(is)h(n)m(ull,)h(no)f(w)m(ord)g(splitting)h(o)s(ccurs.)275
+4682 y(Explicit)21 b(n)m(ull)g(argumen)m(ts)g(\()p Ft("")g
+Fu(or)g Ft('')p Fu(\))f(are)h(retained)h(and)e(passed)g(to)i(commands)e
+(as)i(empt)m(y)f(strings.)150 4792 y(Unquoted)37 b(implicit)i(n)m(ull)f
+(argumen)m(ts,)i(resulting)d(from)g(the)h(expansion)g(of)g(parameters)f
+(that)i(ha)m(v)m(e)150 4902 y(no)32 b(v)-5 b(alues,)33
+b(are)f(remo)m(v)m(ed.)47 b(If)32 b(a)g(parameter)h(with)e(no)h(v)-5
+b(alue)33 b(is)f(expanded)f(within)h(double)f(quotes,)j(a)150
+5011 y(n)m(ull)c(argumen)m(t)g(results)g(and)f(is)h(retained)g(and)f
+(passed)g(to)i(a)f(command)g(as)g(an)f(empt)m(y)i(string.)40
+b(When)150 5121 y(a)f(quoted)f(n)m(ull)g(argumen)m(t)h(app)s(ears)e(as)
+i(part)f(of)g(a)g(w)m(ord)g(whose)g(expansion)g(is)h(non-n)m(ull,)h
+(the)e(n)m(ull)150 5230 y(argumen)m(t)i(is)f(remo)m(v)m(ed.)69
+b(That)39 b(is,)j(the)e(w)m(ord)f Ft(-d'')f Fu(b)s(ecomes)i
+Ft(-d)e Fu(after)i(w)m(ord)f(splitting)h(and)f(n)m(ull)150
+5340 y(argumen)m(t)31 b(remo)m(v)-5 b(al.)p eop end
+%%Page: 33 39
+TeXDict begin 33 38 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(33)275 299
+y(Note)31 b(that)g(if)g(no)f(expansion)g(o)s(ccurs,)g(no)h(splitting)g
+(is)f(p)s(erformed.)150 505 y Fk(3.5.8)63 b(Filename)41
+b(Expansion)150 652 y Fu(After)30 b(w)m(ord)f(splitting,)i(unless)d
+(the)i Ft(-f)f Fu(option)h(has)f(b)s(een)g(set)h(\(see)g(Section)h
+(4.3.1)g([The)e(Set)h(Builtin],)150 762 y(page)d(62\),)i(Bash)d(scans)h
+(eac)m(h)h(w)m(ord)e(for)g(the)h(c)m(haracters)g(`)p
+Ft(*)p Fu(',)h(`)p Ft(?)p Fu(',)g(and)e(`)p Ft([)p Fu('.)39
+b(If)26 b(one)h(of)g(these)f(c)m(haracters)150 872 y(app)s(ears,)34
+b(and)f(is)g(not)h(quoted,)h(then)e(the)h(w)m(ord)f(is)h(regarded)f(as)
+h(a)g Fr(pattern)p Fu(,)h(and)e(replaced)h(with)f(an)150
+981 y(alphab)s(etically)41 b(sorted)e(list)h(of)g(\014lenames)f(matc)m
+(hing)i(the)e(pattern)g(\(see)i(Section)f(3.5.8.1)i([P)m(attern)150
+1091 y(Matc)m(hing],)e(page)e(33\).)60 b(If)36 b(no)h(matc)m(hing)g
+(\014lenames)g(are)g(found,)g(and)f(the)g(shell)h(option)g
+Ft(nullglob)150 1200 y Fu(is)k(disabled,)i(the)f(w)m(ord)e(is)h(left)h
+(unc)m(hanged.)72 b(If)40 b(the)h Ft(nullglob)e Fu(option)i(is)g(set,)k
+(and)40 b(no)h(matc)m(hes)150 1310 y(are)c(found,)g(the)g(w)m(ord)f(is)
+g(remo)m(v)m(ed.)60 b(If)36 b(the)h Ft(failglob)d Fu(shell)j(option)g
+(is)g(set,)i(and)c(no)i(matc)m(hes)h(are)150 1420 y(found,)e(an)g
+(error)f(message)i(is)f(prin)m(ted)f(and)h(the)g(command)f(is)h(not)g
+(executed.)58 b(If)35 b(the)h(shell)g(option)150 1529
+y Ft(nocaseglob)e Fu(is)j(enabled,)i(the)e(matc)m(h)h(is)f(p)s
+(erformed)e(without)i(regard)g(to)h(the)f(case)h(of)f(alphab)s(etic)150
+1639 y(c)m(haracters.)275 1781 y(When)23 b(a)h(pattern)f(is)h(used)f
+(for)g(\014lename)h(expansion,)h(the)e(c)m(haracter)i(`)p
+Ft(.)p Fu(')f(at)g(the)g(start)g(of)g(a)g(\014lename)150
+1890 y(or)f(immediately)i(follo)m(wing)g(a)f(slash)f(m)m(ust)h(b)s(e)f
+(matc)m(hed)h(explicitly)-8 b(,)27 b(unless)c(the)g(shell)h(option)g
+Ft(dotglob)150 2000 y Fu(is)k(set.)41 b(The)28 b(\014lenames)g(`)p
+Ft(.)p Fu(')g(and)g(`)p Ft(..)p Fu(')g(m)m(ust)g(alw)m(a)m(ys)i(b)s(e)e
+(matc)m(hed)h(explicitly)-8 b(,)30 b(ev)m(en)f(if)g Ft(dotglob)d
+Fu(is)i(set.)150 2109 y(In)i(other)g(cases,)i(the)e(`)p
+Ft(.)p Fu(')h(c)m(haracter)h(is)e(not)h(treated)g(sp)s(ecially)-8
+b(.)275 2251 y(When)30 b(matc)m(hing)i(a)f(\014lename,)h(the)f(slash)f
+(c)m(haracter)j(m)m(ust)d(alw)m(a)m(ys)j(b)s(e)d(matc)m(hed)h
+(explicitly)i(b)m(y)e(a)150 2361 y(slash)d(in)f(the)h(pattern,)h(but)e
+(in)h(other)g(matc)m(hing)h(con)m(texts)h(it)e(can)g(b)s(e)g(matc)m
+(hed)g(b)m(y)g(a)g(sp)s(ecial)h(pattern)150 2470 y(c)m(haracter)j(as)f
+(describ)s(ed)e(b)s(elo)m(w)h(\(see)i(Section)f(3.5.8.1)i([P)m(attern)e
+(Matc)m(hing],)i(page)e(33\).)275 2612 y(See)d(the)g(description)g(of)g
+Ft(shopt)e Fu(in)i(Section)g(4.3.2)i([The)e(Shopt)f(Builtin],)i(page)g
+(66,)g(for)f(a)g(descrip-)150 2722 y(tion)j(of)f(the)h
+Ft(nocaseglob)p Fu(,)d Ft(nullglob)p Fu(,)g Ft(failglob)p
+Fu(,)h(and)g Ft(dotglob)g Fu(options.)275 2864 y(The)36
+b Ft(GLOBIGNORE)d Fu(shell)k(v)-5 b(ariable)37 b(ma)m(y)g(b)s(e)f(used)
+g(to)h(restrict)g(the)g(set)g(of)g(\014le)f(names)h(matc)m(hing)150
+2973 y(a)42 b(pattern.)74 b(If)41 b Ft(GLOBIGNORE)e Fu(is)i(set,)k(eac)
+m(h)e(matc)m(hing)f(\014le)g(name)f(that)h(also)h(matc)m(hes)f(one)g
+(of)g(the)150 3083 y(patterns)34 b(in)g Ft(GLOBIGNORE)d
+Fu(is)k(remo)m(v)m(ed)g(from)f(the)g(list)h(of)f(matc)m(hes.)54
+b(If)33 b(the)i Ft(nocaseglob)c Fu(option)k(is)150 3192
+y(set,)c(the)e(matc)m(hing)i(against)g(the)f(patterns)f(in)h
+Ft(GLOBIGNORE)c Fu(is)k(p)s(erformed)e(without)i(regard)f(to)i(case.)
+150 3302 y(The)d(\014lenames)h Ft(.)g Fu(and)f Ft(..)h
+Fu(are)g(alw)m(a)m(ys)h(ignored)f(when)f Ft(GLOBIGNORE)f
+Fu(is)i(set)g(and)f(not)h(n)m(ull.)41 b(Ho)m(w)m(ev)m(er,)150
+3412 y(setting)30 b Ft(GLOBIGNORE)d Fu(to)j(a)f(non-n)m(ull)g(v)-5
+b(alue)30 b(has)f(the)g(e\013ect)i(of)f(enabling)f(the)h
+Ft(dotglob)d Fu(shell)i(option,)150 3521 y(so)j(all)h(other)f
+(\014lenames)g(b)s(eginning)f(with)h(a)g(`)p Ft(.)p Fu(')g(will)h(matc)
+m(h.)46 b(T)-8 b(o)32 b(get)h(the)f(old)g(b)s(eha)m(vior)g(of)h
+(ignoring)150 3631 y(\014lenames)c(b)s(eginning)f(with)h(a)h(`)p
+Ft(.)p Fu(',)f(mak)m(e)h(`)p Ft(.*)p Fu(')f(one)h(of)f(the)g(patterns)g
+(in)g Ft(GLOBIGNORE)p Fu(.)37 b(The)29 b Ft(dotglob)150
+3740 y Fu(option)i(is)f(disabled)g(when)g Ft(GLOBIGNORE)d
+Fu(is)k(unset.)150 3947 y Fk(3.5.8.1)63 b(P)m(attern)40
+b(Matc)m(hing)150 4094 y Fu(An)m(y)24 b(c)m(haracter)h(that)f(app)s
+(ears)f(in)g(a)h(pattern,)i(other)e(than)f(the)h(sp)s(ecial)g(pattern)g
+(c)m(haracters)h(describ)s(ed)150 4203 y(b)s(elo)m(w,)31
+b(matc)m(hes)g(itself.)42 b(The)29 b Fm(nul)h Fu(c)m(haracter)i(ma)m(y)
+e(not)h(o)s(ccur)f(in)g(a)h(pattern.)40 b(A)31 b(bac)m(kslash)g(escap)s
+(es)150 4313 y(the)38 b(follo)m(wing)g(c)m(haracter;)43
+b(the)37 b(escaping)i(bac)m(kslash)e(is)h(discarded)f(when)f(matc)m
+(hing.)63 b(The)36 b(sp)s(ecial)150 4423 y(pattern)30
+b(c)m(haracters)i(m)m(ust)f(b)s(e)e(quoted)i(if)f(they)h(are)f(to)i(b)s
+(e)d(matc)m(hed)i(literally)-8 b(.)275 4564 y(The)29
+b(sp)s(ecial)i(pattern)g(c)m(haracters)h(ha)m(v)m(e)f(the)g(follo)m
+(wing)h(meanings:)150 4735 y Ft(*)432 b Fu(Matc)m(hes)31
+b(an)m(y)e(string,)h(including)f(the)g(n)m(ull)g(string.)41
+b(When)29 b(the)g Ft(globstar)e Fu(shell)i(option)630
+4844 y(is)37 b(enabled,)h(and)e(`)p Ft(*)p Fu(')h(is)g(used)f(in)g(a)h
+(\014lename)g(expansion)g(con)m(text,)j(t)m(w)m(o)e(adjacen)m(t)g(`)p
+Ft(*)p Fu('s)630 4954 y(used)f(as)g(a)h(single)g(pattern)g(will)f(matc)
+m(h)i(all)f(\014les)f(and)g(zero)h(or)g(more)f(directories)i(and)630
+5064 y(sub)s(directories.)g(If)25 b(follo)m(w)m(ed)j(b)m(y)e(a)g(`)p
+Ft(/)p Fu(',)h(t)m(w)m(o)g(adjacen)m(t)h(`)p Ft(*)p Fu('s)e(will)g
+(matc)m(h)h(only)f(directories)630 5173 y(and)k(sub)s(directories.)150
+5340 y Ft(?)432 b Fu(Matc)m(hes)32 b(an)m(y)f(single)g(c)m(haracter.)p
+eop end
+%%Page: 34 40
+TeXDict begin 34 39 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(34)150 299
+y Ft([...)o(])241 b Fu(Matc)m(hes)27 b(an)m(y)e(one)g(of)g(the)g
+(enclosed)g(c)m(haracters.)41 b(A)25 b(pair)f(of)h(c)m(haracters)i
+(separated)e(b)m(y)g(a)630 408 y(h)m(yphen)k(denotes)i(a)g
+Fr(range)g(expression)p Fu(;)f(an)m(y)h(c)m(haracter)h(that)f(falls)g
+(b)s(et)m(w)m(een)g(those)g(t)m(w)m(o)630 518 y(c)m(haracters,)d
+(inclusiv)m(e,)f(using)d(the)h(curren)m(t)f(lo)s(cale's)j(collating)g
+(sequence)e(and)f(c)m(haracter)630 628 y(set,)31 b(is)f(matc)m(hed.)42
+b(If)30 b(the)g(\014rst)g(c)m(haracter)i(follo)m(wing)g(the)e(`)p
+Ft([)p Fu(')h(is)f(a)h(`)p Ft(!)p Fu(')f(or)g(a)h(`)p
+Ft(^)p Fu(')g(then)f(an)m(y)630 737 y(c)m(haracter)c(not)f(enclosed)g
+(is)g(matc)m(hed.)40 b(A)25 b(`)p Fq(\000)p Fu(')f(ma)m(y)i(b)s(e)e
+(matc)m(hed)h(b)m(y)f(including)h(it)g(as)g(the)630 847
+y(\014rst)32 b(or)h(last)h(c)m(haracter)h(in)e(the)g(set.)50
+b(A)33 b(`)p Ft(])p Fu(')g(ma)m(y)h(b)s(e)e(matc)m(hed)i(b)m(y)f
+(including)g(it)g(as)h(the)630 956 y(\014rst)25 b(c)m(haracter)i(in)e
+(the)h(set.)40 b(The)25 b(sorting)h(order)f(of)h(c)m(haracters)h(in)f
+(range)g(expressions)f(is)630 1066 y(determined)h(b)m(y)h(the)g(curren)
+m(t)f(lo)s(cale)j(and)d(the)h(v)-5 b(alues)27 b(of)g(the)g
+Ft(LC_COLLATE)d Fu(and)i Ft(LC_ALL)630 1176 y Fu(shell)31
+b(v)-5 b(ariables,)31 b(if)f(set.)630 1312 y(F)-8 b(or)34
+b(example,)g(in)f(the)g(default)g(C)f(lo)s(cale,)k(`)p
+Ft([a-dx-z])p Fu(')31 b(is)i(equiv)-5 b(alen)m(t)34 b(to)g(`)p
+Ft([abcdxyz])p Fu('.)630 1422 y(Man)m(y)68 b(lo)s(cales)h(sort)f(c)m
+(haracters)h(in)e(dictionary)i(order,)76 b(and)67 b(in)g(these)h(lo)s
+(cales)630 1531 y(`)p Ft([a-dx-z])p Fu(')36 b(is)i(t)m(ypically)i(not)e
+(equiv)-5 b(alen)m(t)39 b(to)g(`)p Ft([abcdxyz])p Fu(';)g(it)g(migh)m
+(t)f(b)s(e)f(equiv)-5 b(alen)m(t)630 1641 y(to)34 b(`)p
+Ft([aBbCcDdxXyYz])p Fu(',)c(for)j(example.)49 b(T)-8
+b(o)33 b(obtain)h(the)f(traditional)h(in)m(terpretation)h(of)630
+1751 y(ranges)e(in)f(brac)m(k)m(et)i(expressions,)g(y)m(ou)f(can)g
+(force)g(the)g(use)f(of)h(the)g(C)f(lo)s(cale)i(b)m(y)f(setting)630
+1860 y(the)c Ft(LC_COLLATE)e Fu(or)i Ft(LC_ALL)f Fu(en)m(vironmen)m(t)i
+(v)-5 b(ariable)30 b(to)g(the)f(v)-5 b(alue)30 b(`)p
+Ft(C)p Fu(',)g(or)f(enable)h(the)630 1970 y Ft(globasciiranges)c
+Fu(shell)31 b(option.)630 2106 y(Within)23 b(`)p Ft([)p
+Fu(')h(and)e(`)p Ft(])p Fu(',)j Fr(c)m(haracter)g(classes)j
+Fu(can)c(b)s(e)e(sp)s(eci\014ed)h(using)f(the)i(syn)m(tax)f
+Ft([:)p Fr(class)t Ft(:])p Fu(,)630 2216 y(where)30 b
+Fr(class)35 b Fu(is)30 b(one)h(of)f(the)h(follo)m(wing)h(classes)f
+(de\014ned)e(in)h(the)h Fm(posix)f Fu(standard:)870 2353
+y Ft(alnum)142 b(alpha)g(ascii)f(blank)h(cntrl)g(digit)g(graph)g(lower)
+870 2462 y(print)g(punct)g(space)f(upper)h(word)190 b(xdigit)630
+2599 y Fu(A)42 b(c)m(haracter)h(class)f(matc)m(hes)h(an)m(y)f(c)m
+(haracter)h(b)s(elonging)f(to)g(that)g(class.)75 b(The)41
+b Ft(word)630 2709 y Fu(c)m(haracter)32 b(class)f(matc)m(hes)h
+(letters,)f(digits,)h(and)d(the)i(c)m(haracter)h(`)p
+Ft(_)p Fu('.)630 2845 y(Within)25 b(`)p Ft([)p Fu(')f(and)g(`)p
+Ft(])p Fu(',)i(an)e Fr(equiv)-5 b(alence)26 b(class)j
+Fu(can)24 b(b)s(e)g(sp)s(eci\014ed)g(using)g(the)g(syn)m(tax)h
+Ft([=)p Fr(c)6 b Ft(=])p Fu(,)630 2955 y(whic)m(h)29
+b(matc)m(hes)i(all)f(c)m(haracters)h(with)e(the)h(same)g(collation)h(w)
+m(eigh)m(t)g(\(as)f(de\014ned)e(b)m(y)i(the)630 3064
+y(curren)m(t)g(lo)s(cale\))j(as)d(the)h(c)m(haracter)h
+Fr(c)p Fu(.)630 3201 y(Within)22 b(`)p Ft([)p Fu(')f(and)g(`)p
+Ft(])p Fu(',)j(the)d(syn)m(tax)h Ft([.)p Fr(sym)m(b)s(ol)t
+Ft(.])e Fu(matc)m(hes)i(the)g(collating)i(sym)m(b)s(ol)d
+Fr(sym)m(b)s(ol)p Fu(.)275 3367 y(If)29 b(the)g Ft(extglob)f
+Fu(shell)h(option)h(is)g(enabled)f(using)g(the)h Ft(shopt)e
+Fu(builtin,)h(sev)m(eral)i(extended)f(pattern)150 3477
+y(matc)m(hing)37 b(op)s(erators)e(are)h(recognized.)58
+b(In)35 b(the)g(follo)m(wing)i(description,)g(a)f Fr(pattern-list)j
+Fu(is)d(a)g(list)g(of)150 3586 y(one)d(or)f(more)h(patterns)f
+(separated)h(b)m(y)f(a)h(`)p Ft(|)p Fu('.)47 b(Comp)s(osite)33
+b(patterns)f(ma)m(y)i(b)s(e)d(formed)h(using)g(one)h(or)150
+3696 y(more)e(of)f(the)h(follo)m(wing)g(sub-patterns:)150
+3862 y Ft(?\()p Fj(pattern-list)p Ft(\))630 3971 y Fu(Matc)m(hes)h
+(zero)f(or)g(one)f(o)s(ccurrence)h(of)f(the)h(giv)m(en)g(patterns.)150
+4135 y Ft(*\()p Fj(pattern-list)p Ft(\))630 4245 y Fu(Matc)m(hes)h
+(zero)f(or)g(more)f(o)s(ccurrences)h(of)f(the)h(giv)m(en)g(patterns.)
+150 4408 y Ft(+\()p Fj(pattern-list)p Ft(\))630 4518
+y Fu(Matc)m(hes)h(one)f(or)f(more)h(o)s(ccurrences)f(of)h(the)f(giv)m
+(en)i(patterns.)150 4682 y Ft(@\()p Fj(pattern-list)p
+Ft(\))630 4791 y Fu(Matc)m(hes)g(one)f(of)f(the)h(giv)m(en)g(patterns.)
+150 4955 y Ft(!\()p Fj(pattern-list)p Ft(\))630 5064
+y Fu(Matc)m(hes)h(an)m(ything)f(except)g(one)g(of)f(the)h(giv)m(en)g
+(patterns.)275 5230 y(Complicated)41 b(extended)f(pattern)g(matc)m
+(hing)h(against)h(long)f(strings)f(is)g(slo)m(w,)k(esp)s(ecially)d
+(when)150 5340 y(the)29 b(patterns)g(con)m(tain)i(alternations)f(and)f
+(the)g(strings)g(con)m(tain)h(m)m(ultiple)g(matc)m(hes.)42
+b(Using)29 b(separate)p eop end
+%%Page: 35 41
+TeXDict begin 35 40 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(35)150 299
+y(matc)m(hes)38 b(against)g(shorter)e(strings,)i(or)f(using)f(arra)m
+(ys)h(of)g(strings)f(instead)h(of)g(a)g(single)g(long)h(string,)150
+408 y(ma)m(y)31 b(b)s(e)f(faster.)150 614 y Fk(3.5.9)63
+b(Quote)41 b(Remo)m(v)-7 b(al)150 760 y Fu(After)32 b(the)g(preceding)g
+(expansions,)h(all)f(unquoted)f(o)s(ccurrences)h(of)g(the)h(c)m
+(haracters)g(`)p Ft(\\)p Fu(',)g(`)p Ft(')p Fu(',)f(and)g(`)p
+Ft(")p Fu(')150 870 y(that)f(did)f(not)g(result)g(from)g(one)h(of)g
+(the)f(ab)s(o)m(v)m(e)i(expansions)e(are)h(remo)m(v)m(ed.)150
+1120 y Fs(3.6)68 b(Redirections)150 1279 y Fu(Before)32
+b(a)f(command)f(is)h(executed,)h(its)f(input)e(and)h(output)h(ma)m(y)g
+(b)s(e)f Fr(redirected)k Fu(using)c(a)i(sp)s(ecial)f(no-)150
+1389 y(tation)d(in)m(terpreted)f(b)m(y)f(the)h(shell.)40
+b(Redirection)27 b(allo)m(ws)h(commands')f(\014le)f(handles)g(to)i(b)s
+(e)e(duplicated,)150 1498 y(op)s(ened,)i(closed,)i(made)e(to)h(refer)f
+(to)h(di\013eren)m(t)f(\014les,)h(and)f(can)g(c)m(hange)h(the)g
+(\014les)f(the)g(command)g(reads)150 1608 y(from)39 b(and)g(writes)h
+(to.)69 b(Redirection)40 b(ma)m(y)g(also)h(b)s(e)e(used)g(to)h(mo)s
+(dify)f(\014le)g(handles)g(in)g(the)h(curren)m(t)150
+1717 y(shell)e(execution)h(en)m(vironmen)m(t.)65 b(The)37
+b(follo)m(wing)j(redirection)f(op)s(erators)f(ma)m(y)g(precede)h(or)f
+(app)s(ear)150 1827 y(an)m(ywhere)30 b(within)f(a)h(simple)f(command)h
+(or)f(ma)m(y)i(follo)m(w)g(a)f(command.)40 b(Redirections)30
+b(are)g(pro)s(cessed)150 1936 y(in)g(the)h(order)f(they)g(app)s(ear,)g
+(from)g(left)h(to)g(righ)m(t.)275 2077 y(Eac)m(h)45 b(redirection)h
+(that)f(ma)m(y)h(b)s(e)e(preceded)g(b)m(y)h(a)h(\014le)f(descriptor)f
+(n)m(um)m(b)s(er)g(ma)m(y)h(instead)h(b)s(e)150 2186
+y(preceded)41 b(b)m(y)g(a)h(w)m(ord)f(of)g(the)h(form)f
+Fi({)p Fr(v)-5 b(arname)5 b Fi(})p Fu(.)74 b(In)41 b(this)g(case,)k
+(for)c(eac)m(h)i(redirection)f(op)s(erator)150 2296 y(except)37
+b Ft(>)p Fu(&-)e(and)g Ft(<)p Fu(&-,)i(the)f(shell)g(will)g(allo)s
+(cate)j(a)d(\014le)g(descriptor)f(greater)i(than)f(10)g(and)f(assign)h
+(it)150 2406 y(to)e Fi({)p Fr(v)-5 b(arname)5 b Fi(})p
+Fu(.)52 b(If)33 b Ft(>)p Fu(&-)g(or)h Ft(<)p Fu(&-)f(is)g(preceded)h(b)
+m(y)f Fi({)p Fr(v)-5 b(arname)5 b Fi(})p Fu(,)36 b(the)e(v)-5
+b(alue)34 b(of)f Fr(v)-5 b(arname)39 b Fu(de\014nes)33
+b(the)150 2515 y(\014le)e(descriptor)g(to)h(close.)43
+b(If)31 b Fi({)p Fr(v)-5 b(arname)5 b Fi(})32 b Fu(is)f(supplied,)f
+(the)h(redirection)g(p)s(ersists)f(b)s(ey)m(ond)h(the)g(scop)s(e)150
+2625 y(of)42 b(the)f(command,)j(allo)m(wing)f(the)f(shell)g(programmer)
+f(to)h(manage)g(the)g(\014le)f(descriptor's)h(lifetime)150
+2734 y(man)m(ually)-8 b(.)275 2875 y(In)27 b(the)i(follo)m(wing)h
+(descriptions,)g(if)e(the)h(\014le)g(descriptor)f(n)m(um)m(b)s(er)g(is)
+g(omitted,)i(and)f(the)f(\014rst)g(c)m(har-)150 2984
+y(acter)42 b(of)f(the)g(redirection)g(op)s(erator)g(is)g(`)p
+Ft(<)p Fu(',)i(the)e(redirection)g(refers)g(to)g(the)g(standard)f
+(input)f(\(\014le)150 3094 y(descriptor)33 b(0\).)49
+b(If)33 b(the)g(\014rst)f(c)m(haracter)i(of)g(the)f(redirection)g(op)s
+(erator)h(is)f(`)p Ft(>)p Fu(',)h(the)f(redirection)g(refers)150
+3203 y(to)e(the)g(standard)e(output)h(\(\014le)h(descriptor)f(1\).)275
+3344 y(The)h(w)m(ord)h(follo)m(wing)i(the)f(redirection)g(op)s(erator)f
+(in)g(the)h(follo)m(wing)h(descriptions,)f(unless)e(other-)150
+3453 y(wise)21 b(noted,)i(is)e(sub)5 b(jected)21 b(to)h(brace)f
+(expansion,)i(tilde)f(expansion,)h(parameter)e(expansion,)i(command)150
+3563 y(substitution,)31 b(arithmetic)h(expansion,)f(quote)h(remo)m(v)-5
+b(al,)33 b(\014lename)e(expansion,)g(and)f(w)m(ord)h(splitting.)150
+3672 y(If)f(it)h(expands)e(to)i(more)g(than)f(one)h(w)m(ord,)f(Bash)h
+(rep)s(orts)e(an)h(error.)275 3813 y(Note)h(that)g(the)g(order)f(of)g
+(redirections)h(is)g(signi\014can)m(t.)41 b(F)-8 b(or)31
+b(example,)h(the)e(command)390 3953 y Ft(ls)47 b(>)h
+Fj(dirlist)d Ft(2>&1)150 4093 y Fu(directs)28 b(b)s(oth)f(standard)g
+(output)g(\(\014le)h(descriptor)f(1\))i(and)e(standard)f(error)i
+(\(\014le)g(descriptor)f(2\))h(to)h(the)150 4203 y(\014le)h
+Fr(dirlist)p Fu(,)h(while)f(the)h(command)390 4343 y
+Ft(ls)47 b(2>&1)g(>)g Fj(dirlist)150 4484 y Fu(directs)28
+b(only)f(the)h(standard)e(output)i(to)g(\014le)f Fr(dirlist)p
+Fu(,)h(b)s(ecause)g(the)f(standard)g(error)g(w)m(as)h(made)f(a)h(cop)m
+(y)150 4593 y(of)j(the)f(standard)g(output)g(b)s(efore)g(the)g
+(standard)g(output)g(w)m(as)g(redirected)h(to)g Fr(dirlist)p
+Fu(.)275 4733 y(Bash)26 b(handles)f(sev)m(eral)j(\014lenames)e(sp)s
+(ecially)h(when)f(they)g(are)g(used)g(in)g(redirections,)i(as)e
+(describ)s(ed)150 4843 y(in)38 b(the)h(follo)m(wing)h(table.)66
+b(If)38 b(the)h(op)s(erating)g(system)f(on)h(whic)m(h)f(Bash)h(is)f
+(running)f(pro)m(vides)h(these)150 4953 y(sp)s(ecial)27
+b(\014les,)g(bash)e(will)i(use)f(them;)h(otherwise)g(it)f(will)h(em)m
+(ulate)h(them)e(in)m(ternally)h(with)f(the)g(b)s(eha)m(vior)150
+5062 y(describ)s(ed)j(b)s(elo)m(w.)150 5230 y Ft(/dev/fd/)p
+Fj(fd)630 5340 y Fu(If)h Fr(fd)j Fu(is)d(a)h(v)-5 b(alid)31
+b(in)m(teger,)h(\014le)e(descriptor)h Fr(fd)i Fu(is)d(duplicated.)p
+eop end
+%%Page: 36 42
+TeXDict begin 36 41 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(36)150 299
+y Ft(/dev/stdin)630 408 y Fu(File)32 b(descriptor)e(0)h(is)f
+(duplicated.)150 577 y Ft(/dev/stdout)630 687 y Fu(File)i(descriptor)e
+(1)h(is)f(duplicated.)150 856 y Ft(/dev/stderr)630 965
+y Fu(File)i(descriptor)e(2)h(is)f(duplicated.)150 1134
+y Ft(/dev/tcp/)p Fj(host)p Ft(/)p Fj(port)630 1244 y
+Fu(If)41 b Fr(host)i Fu(is)f(a)g(v)-5 b(alid)41 b(hostname)h(or)f(In)m
+(ternet)h(address,)i(and)c Fr(p)s(ort)j Fu(is)f(an)f(in)m(teger)i(p)s
+(ort)630 1354 y(n)m(um)m(b)s(er)23 b(or)i(service)h(name,)g(Bash)f
+(attempts)h(to)f(op)s(en)f(the)h(corresp)s(onding)f(TCP)g(so)s(c)m(k)m
+(et.)150 1522 y Ft(/dev/udp/)p Fj(host)p Ft(/)p Fj(port)630
+1632 y Fu(If)41 b Fr(host)i Fu(is)f(a)g(v)-5 b(alid)41
+b(hostname)h(or)f(In)m(ternet)h(address,)i(and)c Fr(p)s(ort)j
+Fu(is)f(an)f(in)m(teger)i(p)s(ort)630 1742 y(n)m(um)m(b)s(er)23
+b(or)h(service)h(name,)h(Bash)e(attempts)h(to)g(op)s(en)f(the)g
+(corresp)s(onding)f(UDP)i(so)s(c)m(k)m(et.)275 1915 y(A)30
+b(failure)h(to)g(op)s(en)e(or)i(create)h(a)e(\014le)h(causes)g(the)f
+(redirection)h(to)g(fail.)275 2059 y(Redirections)f(using)e(\014le)i
+(descriptors)f(greater)h(than)f(9)h(should)e(b)s(e)h(used)f(with)h
+(care,)h(as)g(they)f(ma)m(y)150 2169 y(con\015ict)i(with)f(\014le)h
+(descriptors)f(the)g(shell)h(uses)f(in)m(ternally)-8
+b(.)150 2378 y Fk(3.6.1)63 b(Redirecting)40 b(Input)150
+2525 y Fu(Redirection)35 b(of)f(input)f(causes)i(the)f(\014le)g(whose)g
+(name)g(results)g(from)g(the)g(expansion)g(of)g Fr(w)m(ord)k
+Fu(to)d(b)s(e)150 2634 y(op)s(ened)d(for)g(reading)g(on)g(\014le)h
+(descriptor)f Ft(n)p Fu(,)h(or)f(the)g(standard)g(input)f(\(\014le)i
+(descriptor)f(0\))h(if)f Ft(n)g Fu(is)h(not)150 2744
+y(sp)s(eci\014ed.)275 2888 y(The)c(general)j(format)e(for)h
+(redirecting)g(input)e(is:)390 3032 y Ft([)p Fj(n)p Ft(]<)p
+Fj(word)150 3241 y Fk(3.6.2)63 b(Redirecting)40 b(Output)150
+3388 y Fu(Redirection)31 b(of)g(output)f(causes)h(the)f(\014le)h(whose)
+f(name)g(results)h(from)e(the)i(expansion)f(of)h Fr(w)m(ord)i
+Fu(to)f(b)s(e)150 3497 y(op)s(ened)d(for)g(writing)g(on)g(\014le)h
+(descriptor)f Fr(n)p Fu(,)g(or)g(the)h(standard)e(output)h(\(\014le)h
+(descriptor)f(1\))h(if)g Fr(n)e Fu(is)i(not)150 3607
+y(sp)s(eci\014ed.)40 b(If)30 b(the)g(\014le)h(do)s(es)f(not)h(exist)g
+(it)g(is)f(created;)i(if)e(it)h(do)s(es)f(exist)h(it)g(is)g(truncated)f
+(to)h(zero)g(size.)275 3751 y(The)e(general)j(format)e(for)h
+(redirecting)g(output)f(is:)390 3895 y Ft([)p Fj(n)p
+Ft(]>[|])p Fj(word)275 4039 y Fu(If)g(the)h(redirection)g(op)s(erator)g
+(is)g(`)p Ft(>)p Fu(',)g(and)f(the)h Ft(noclobber)d Fu(option)j(to)g
+(the)g Ft(set)f Fu(builtin)g(has)h(b)s(een)150 4148 y(enabled,)h(the)g
+(redirection)h(will)f(fail)h(if)e(the)i(\014le)e(whose)h(name)g
+(results)g(from)f(the)h(expansion)g(of)g Fr(w)m(ord)150
+4258 y Fu(exists)f(and)f(is)g(a)h(regular)g(\014le.)41
+b(If)30 b(the)h(redirection)g(op)s(erator)g(is)f(`)p
+Ft(>|)p Fu(',)h(or)f(the)h(redirection)g(op)s(erator)g(is)150
+4367 y(`)p Ft(>)p Fu(')36 b(and)f(the)g Ft(noclobber)e
+Fu(option)j(is)g(not)g(enabled,)h(the)e(redirection)h(is)g(attempted)g
+(ev)m(en)h(if)e(the)h(\014le)150 4477 y(named)30 b(b)m(y)g
+Fr(w)m(ord)k Fu(exists.)150 4686 y Fk(3.6.3)63 b(App)s(ending)42
+b(Redirected)e(Output)150 4833 y Fu(Redirection)23 b(of)e(output)h(in)f
+(this)h(fashion)f(causes)h(the)g(\014le)g(whose)f(name)h(results)f
+(from)g(the)h(expansion)g(of)150 4942 y Fr(w)m(ord)28
+b Fu(to)e(b)s(e)e(op)s(ened)g(for)h(app)s(ending)e(on)i(\014le)g
+(descriptor)g Fr(n)p Fu(,)g(or)g(the)g(standard)f(output)h(\(\014le)g
+(descriptor)150 5052 y(1\))31 b(if)f Fr(n)g Fu(is)h(not)f(sp)s
+(eci\014ed.)40 b(If)30 b(the)h(\014le)f(do)s(es)g(not)h(exist)g(it)g
+(is)f(created.)275 5196 y(The)f(general)j(format)e(for)h(app)s(ending)e
+(output)h(is:)390 5340 y Ft([)p Fj(n)p Ft(]>>)p Fj(word)p
+eop end
+%%Page: 37 43
+TeXDict begin 37 42 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(37)150 299
+y Fk(3.6.4)63 b(Redirecting)40 b(Standard)h(Output)g(and)g(Standard)g
+(Error)150 446 y Fu(This)33 b(construct)i(allo)m(ws)g(b)s(oth)f(the)g
+(standard)g(output)f(\(\014le)i(descriptor)f(1\))h(and)f(the)g
+(standard)f(error)150 555 y(output)d(\(\014le)h(descriptor)f(2\))h(to)g
+(b)s(e)f(redirected)h(to)g(the)f(\014le)h(whose)f(name)h(is)f(the)g
+(expansion)h(of)f Fr(w)m(ord)p Fu(.)275 712 y(There)f(are)i(t)m(w)m(o)h
+(formats)e(for)h(redirecting)g(standard)e(output)h(and)g(standard)f
+(error:)390 870 y Ft(&>)p Fj(word)150 1027 y Fu(and)390
+1184 y Ft(>&)p Fj(word)150 1341 y Fu(Of)h(the)g(t)m(w)m(o)i(forms,)e
+(the)h(\014rst)e(is)i(preferred.)39 b(This)30 b(is)g(seman)m(tically)j
+(equiv)-5 b(alen)m(t)32 b(to)390 1498 y Ft(>)p Fj(word)46
+b Ft(2>&1)275 1655 y Fu(When)41 b(using)g(the)h(second)f(form,)k
+Fr(w)m(ord)f Fu(ma)m(y)e(not)g(expand)f(to)h(a)g(n)m(um)m(b)s(er)f(or)g
+(`)p Ft(-)p Fu('.)75 b(If)41 b(it)h(do)s(es,)150 1764
+y(other)27 b(redirection)g(op)s(erators)f(apply)h(\(see)g(Duplicating)h
+(File)f(Descriptors)h(b)s(elo)m(w\))f(for)f(compatibilit)m(y)150
+1874 y(reasons.)150 2096 y Fk(3.6.5)63 b(App)s(ending)42
+b(Standard)f(Output)g(and)g(Standard)g(Error)150 2243
+y Fu(This)33 b(construct)i(allo)m(ws)g(b)s(oth)f(the)g(standard)g
+(output)f(\(\014le)i(descriptor)f(1\))h(and)f(the)g(standard)f(error)
+150 2352 y(output)d(\(\014le)h(descriptor)f(2\))h(to)g(b)s(e)f(app)s
+(ended)f(to)i(the)f(\014le)h(whose)f(name)g(is)h(the)f(expansion)h(of)f
+Fr(w)m(ord)p Fu(.)275 2509 y(The)f(format)i(for)f(app)s(ending)f
+(standard)h(output)g(and)f(standard)h(error)g(is:)390
+2666 y Ft(&>>)p Fj(word)150 2823 y Fu(This)g(is)g(seman)m(tically)j
+(equiv)-5 b(alen)m(t)32 b(to)390 2980 y Ft(>>)p Fj(word)46
+b Ft(2>&1)275 3138 y Fu(\(see)31 b(Duplicating)h(File)f(Descriptors)g
+(b)s(elo)m(w\).)150 3359 y Fk(3.6.6)63 b(Here)41 b(Do)s(cumen)m(ts)150
+3506 y Fu(This)26 b(t)m(yp)s(e)g(of)h(redirection)g(instructs)f(the)g
+(shell)h(to)g(read)f(input)g(from)g(the)g(curren)m(t)h(source)f(un)m
+(til)h(a)g(line)150 3616 y(con)m(taining)h(only)e Fr(w)m(ord)k
+Fu(\(with)c(no)g(trailing)h(blanks\))f(is)g(seen.)40
+b(All)27 b(of)f(the)g(lines)h(read)f(up)f(to)i(that)g(p)s(oin)m(t)150
+3725 y(are)k(then)f(used)f(as)i(the)g(standard)e(input)h(\(or)g(\014le)
+h(descriptor)f Fr(n)g Fu(if)g Fr(n)g Fu(is)g(sp)s(eci\014ed\))g(for)h
+(a)f(command.)275 3883 y(The)f(format)i(of)g(here-do)s(cumen)m(ts)f
+(is:)390 4040 y Ft([)p Fj(n)p Ft(]<<[)p Fq(\000)p Ft(])p
+Fj(word)772 4149 y(here-document)390 4259 y(delimiter)275
+4416 y Fu(No)i(parameter)h(and)f(v)-5 b(ariable)32 b(expansion,)h
+(command)f(substitution,)h(arithmetic)g(expansion,)g(or)150
+4525 y(\014lename)26 b(expansion)g(is)g(p)s(erformed)e(on)i
+Fr(w)m(ord)p Fu(.)39 b(If)25 b(an)m(y)i(part)e(of)h Fr(w)m(ord)j
+Fu(is)d(quoted,)i(the)e Fr(delimiter)33 b Fu(is)26 b(the)150
+4635 y(result)33 b(of)g(quote)g(remo)m(v)-5 b(al)34 b(on)f
+Fr(w)m(ord)p Fu(,)g(and)f(the)h(lines)g(in)g(the)g(here-do)s(cumen)m(t)
+g(are)g(not)g(expanded.)47 b(If)150 4745 y Fr(w)m(ord)26
+b Fu(is)c(unquoted,)h(all)g(lines)g(of)g(the)f(here-do)s(cumen)m(t)g
+(are)h(sub)5 b(jected)22 b(to)h(parameter)g(expansion,)h(com-)150
+4854 y(mand)30 b(substitution,)g(and)g(arithmetic)h(expansion,)g(the)f
+(c)m(haracter)i(sequence)f Ft(\\newline)d Fu(is)j(ignored,)150
+4964 y(and)f(`)p Ft(\\)p Fu(')g(m)m(ust)h(b)s(e)e(used)h(to)h(quote)g
+(the)g(c)m(haracters)g(`)p Ft(\\)p Fu(',)g(`)p Ft($)p
+Fu(',)g(and)f(`)p Ft(`)p Fu('.)275 5121 y(If)21 b(the)i(redirection)g
+(op)s(erator)g(is)f(`)p Ft(<<-)p Fu(',)i(then)e(all)h(leading)g(tab)g
+(c)m(haracters)h(are)e(stripp)s(ed)f(from)h(input)150
+5230 y(lines)33 b(and)f(the)h(line)h(con)m(taining)g
+Fr(delimiter)p Fu(.)49 b(This)32 b(allo)m(ws)i(here-do)s(cumen)m(ts)f
+(within)f(shell)i(scripts)e(to)150 5340 y(b)s(e)e(inden)m(ted)g(in)g(a)
+h(natural)f(fashion.)p eop end
+%%Page: 38 44
+TeXDict begin 38 43 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(38)150 299
+y Fk(3.6.7)63 b(Here)41 b(Strings)150 446 y Fu(A)30 b(v)-5
+b(arian)m(t)32 b(of)e(here)h(do)s(cumen)m(ts,)f(the)g(format)h(is:)390
+600 y Ft([)p Fj(n)p Ft(]<<<)46 b Fj(word)275 753 y Fu(The)29
+b Fr(w)m(ord)k Fu(undergo)s(es)c(tilde)i(expansion,)f(parameter)h(and)e
+(v)-5 b(ariable)31 b(expansion,)f(command)g(sub-)150
+863 y(stitution,)f(arithmetic)f(expansion,)g(and)f(quote)h(remo)m(v)-5
+b(al.)41 b(Filename)29 b(expansion)e(and)f(w)m(ord)h(splitting)150
+973 y(are)35 b(not)g(p)s(erformed.)51 b(The)34 b(result)h(is)g
+(supplied)e(as)i(a)f(single)i(string,)f(with)g(a)g(newline)f(app)s
+(ended,)g(to)150 1082 y(the)d(command)f(on)g(its)h(standard)e(input)h
+(\(or)g(\014le)h(descriptor)f Fr(n)g Fu(if)g Fr(n)g Fu(is)h(sp)s
+(eci\014ed\).)150 1301 y Fk(3.6.8)63 b(Duplicating)41
+b(File)g(Descriptors)150 1448 y Fu(The)30 b(redirection)h(op)s(erator)
+390 1602 y Ft([)p Fj(n)p Ft(]<&)p Fj(word)150 1755 y
+Fu(is)k(used)e(to)j(duplicate)f(input)f(\014le)g(descriptors.)53
+b(If)34 b Fr(w)m(ord)k Fu(expands)c(to)h(one)g(or)g(more)g(digits,)h
+(the)f(\014le)150 1865 y(descriptor)e(denoted)h(b)m(y)f
+Fr(n)g Fu(is)g(made)h(to)g(b)s(e)f(a)g(cop)m(y)h(of)g(that)g(\014le)f
+(descriptor.)50 b(If)33 b(the)h(digits)g(in)f Fr(w)m(ord)150
+1975 y Fu(do)c(not)h(sp)s(ecify)f(a)h(\014le)f(descriptor)g(op)s(en)g
+(for)g(input,)g(a)h(redirection)g(error)f(o)s(ccurs.)40
+b(If)29 b Fr(w)m(ord)j Fu(ev)-5 b(aluates)150 2084 y(to)31
+b(`)p Ft(-)p Fu(',)g(\014le)g(descriptor)g Fr(n)f Fu(is)g(closed.)43
+b(If)30 b Fr(n)g Fu(is)g(not)h(sp)s(eci\014ed,)f(the)h(standard)f
+(input)g(\(\014le)h(descriptor)f(0\))150 2194 y(is)g(used.)275
+2348 y(The)f(op)s(erator)390 2502 y Ft([)p Fj(n)p Ft(]>&)p
+Fj(word)150 2655 y Fu(is)40 b(used)g(similarly)h(to)g(duplicate)f
+(output)g(\014le)h(descriptors.)70 b(If)40 b Fr(n)f Fu(is)i(not)f(sp)s
+(eci\014ed,)i(the)f(standard)150 2765 y(output)30 b(\(\014le)g
+(descriptor)g(1\))h(is)f(used.)39 b(If)30 b(the)g(digits)h(in)e
+Fr(w)m(ord)34 b Fu(do)29 b(not)i(sp)s(ecify)e(a)i(\014le)f(descriptor)g
+(op)s(en)150 2875 y(for)35 b(output,)h(a)g(redirection)g(error)e(o)s
+(ccurs.)55 b(If)35 b Fr(w)m(ord)j Fu(ev)-5 b(aluates)37
+b(to)f(`)p Ft(-)p Fu(',)h(\014le)e(descriptor)g Fr(n)g
+Fu(is)g(closed.)150 2984 y(As)f(a)g(sp)s(ecial)h(case,)h(if)e
+Fr(n)f Fu(is)h(omitted,)i(and)e Fr(w)m(ord)j Fu(do)s(es)d(not)g(expand)
+f(to)i(one)f(or)g(more)g(digits)h(or)f(`)p Ft(-)p Fu(',)150
+3094 y(the)d(standard)e(output)h(and)g(standard)f(error)h(are)h
+(redirected)g(as)g(describ)s(ed)e(previously)-8 b(.)150
+3312 y Fk(3.6.9)63 b(Mo)m(ving)41 b(File)h(Descriptors)150
+3459 y Fu(The)30 b(redirection)h(op)s(erator)390 3613
+y Ft([)p Fj(n)p Ft(]<&)p Fj(digit)p Ft(-)150 3767 y Fu(mo)m(v)m(es)i
+(the)f(\014le)g(descriptor)f Fr(digit)k Fu(to)d(\014le)g(descriptor)g
+Fr(n)p Fu(,)f(or)h(the)g(standard)f(input)f(\(\014le)j(descriptor)e
+(0\))150 3876 y(if)f Fr(n)g Fu(is)h(not)f(sp)s(eci\014ed.)40
+b Fr(digit)33 b Fu(is)e(closed)g(after)g(b)s(eing)f(duplicated)g(to)h
+Fr(n)p Fu(.)275 4030 y(Similarly)-8 b(,)31 b(the)f(redirection)h(op)s
+(erator)390 4184 y Ft([)p Fj(n)p Ft(]>&)p Fj(digit)p
+Ft(-)150 4338 y Fu(mo)m(v)m(es)e(the)g(\014le)f(descriptor)f
+Fr(digit)k Fu(to)e(\014le)f(descriptor)g Fr(n)p Fu(,)g(or)g(the)g
+(standard)f(output)h(\(\014le)g(descriptor)g(1\))150
+4448 y(if)i Fr(n)g Fu(is)h(not)f(sp)s(eci\014ed.)150
+4666 y Fk(3.6.10)63 b(Op)s(ening)42 b(File)g(Descriptors)g(for)g
+(Reading)e(and)h(W)-10 b(riting)150 4813 y Fu(The)30
+b(redirection)h(op)s(erator)390 4967 y Ft([)p Fj(n)p
+Ft(]<>)p Fj(word)150 5121 y Fu(causes)39 b(the)g(\014le)g(whose)g(name)
+g(is)g(the)g(expansion)g(of)g Fr(w)m(ord)j Fu(to)d(b)s(e)g(op)s(ened)f
+(for)g(b)s(oth)h(reading)g(and)150 5230 y(writing)33
+b(on)f(\014le)h(descriptor)f Fr(n)p Fu(,)h(or)g(on)f(\014le)h
+(descriptor)g(0)g(if)f Fr(n)g Fu(is)h(not)g(sp)s(eci\014ed.)47
+b(If)32 b(the)h(\014le)f(do)s(es)h(not)150 5340 y(exist,)e(it)g(is)g
+(created.)p eop end
+%%Page: 39 45
+TeXDict begin 39 44 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(39)150 299
+y Fs(3.7)68 b(Executing)46 b(Commands)150 523 y Fk(3.7.1)63
+b(Simple)41 b(Command)h(Expansion)150 670 y Fu(When)33
+b(a)g(simple)g(command)g(is)g(executed,)h(the)g(shell)f(p)s(erforms)e
+(the)i(follo)m(wing)i(expansions,)e(assign-)150 779 y(men)m(ts,)e(and)f
+(redirections,)h(from)f(left)h(to)g(righ)m(t,)g(in)f(the)h(follo)m
+(wing)h(order.)199 913 y(1.)61 b(The)38 b(w)m(ords)f(that)i(the)g
+(parser)e(has)h(mark)m(ed)g(as)h(v)-5 b(ariable)39 b(assignmen)m(ts)g
+(\(those)g(preceding)f(the)330 1023 y(command)30 b(name\))h(and)f
+(redirections)h(are)f(sa)m(v)m(ed)i(for)e(later)h(pro)s(cessing.)199
+1157 y(2.)61 b(The)39 b(w)m(ords)g(that)i(are)f(not)g(v)-5
+b(ariable)40 b(assignmen)m(ts)h(or)e(redirections)i(are)f(expanded)f
+(\(see)h(Sec-)330 1267 y(tion)d(3.5)i([Shell)e(Expansions],)h(page)g
+(22\).)61 b(If)37 b(an)m(y)g(w)m(ords)f(remain)h(after)h(expansion,)h
+(the)e(\014rst)330 1376 y(w)m(ord)31 b(is)g(tak)m(en)h(to)g(b)s(e)f
+(the)g(name)h(of)f(the)h(command)f(and)f(the)i(remaining)f(w)m(ords)g
+(are)g(the)h(argu-)330 1486 y(men)m(ts.)199 1620 y(3.)61
+b(Redirections)25 b(are)f(p)s(erformed)f(as)h(describ)s(ed)f(ab)s(o)m
+(v)m(e)i(\(see)g(Section)g(3.6)g([Redirections],)i(page)d(35\).)199
+1754 y(4.)61 b(The)25 b(text)h(after)f(the)g(`)p Ft(=)p
+Fu(')h(in)e(eac)m(h)j(v)-5 b(ariable)25 b(assignmen)m(t)h(undergo)s(es)
+e(tilde)i(expansion,)g(parameter)330 1864 y(expansion,)49
+b(command)d(substitution,)j(arithmetic)d(expansion,)k(and)45
+b(quote)h(remo)m(v)-5 b(al)46 b(b)s(efore)330 1973 y(b)s(eing)30
+b(assigned)h(to)g(the)f(v)-5 b(ariable.)275 2132 y(If)32
+b(no)i(command)f(name)g(results,)h(the)g(v)-5 b(ariable)34
+b(assignmen)m(ts)g(a\013ect)h(the)f(curren)m(t)f(shell)h(en)m(viron-)
+150 2242 y(men)m(t.)39 b(Otherwise,)27 b(the)e(v)-5 b(ariables)26
+b(are)g(added)f(to)h(the)f(en)m(vironmen)m(t)h(of)g(the)f(executed)h
+(command)g(and)150 2351 y(do)35 b(not)f(a\013ect)j(the)d(curren)m(t)h
+(shell)g(en)m(vironmen)m(t.)54 b(If)34 b(an)m(y)h(of)g(the)f(assignmen)
+m(ts)i(attempts)f(to)h(assign)150 2461 y(a)j(v)-5 b(alue)39
+b(to)g(a)g(readonly)f(v)-5 b(ariable,)42 b(an)c(error)g(o)s(ccurs,)j
+(and)c(the)i(command)f(exits)h(with)g(a)f(non-zero)150
+2570 y(status.)275 2705 y(If)33 b(no)g(command)g(name)h(results,)g
+(redirections)g(are)g(p)s(erformed,)f(but)g(do)h(not)f(a\013ect)i(the)f
+(curren)m(t)150 2814 y(shell)d(en)m(vironmen)m(t.)41
+b(A)30 b(redirection)h(error)f(causes)h(the)g(command)f(to)h(exit)g
+(with)f(a)h(non-zero)g(status.)275 2948 y(If)26 b(there)i(is)f(a)h
+(command)f(name)h(left)g(after)g(expansion,)g(execution)h(pro)s(ceeds)e
+(as)g(describ)s(ed)f(b)s(elo)m(w.)150 3058 y(Otherwise,)39
+b(the)e(command)g(exits.)62 b(If)37 b(one)g(of)g(the)h(expansions)f
+(con)m(tained)h(a)g(command)f(substitu-)150 3167 y(tion,)i(the)d(exit)h
+(status)g(of)f(the)h(command)f(is)h(the)f(exit)h(status)g(of)f(the)h
+(last)g(command)f(substitution)150 3277 y(p)s(erformed.)55
+b(If)35 b(there)g(w)m(ere)h(no)g(command)f(substitutions,)i(the)e
+(command)h(exits)g(with)f(a)h(status)g(of)150 3387 y(zero.)150
+3585 y Fk(3.7.2)63 b(Command)41 b(Searc)m(h)f(and)h(Execution)150
+3732 y Fu(After)i(a)h(command)f(has)g(b)s(een)f(split)h(in)m(to)h(w)m
+(ords,)j(if)c(it)g(results)g(in)g(a)h(simple)f(command)g(and)f(an)150
+3842 y(optional)32 b(list)f(of)f(argumen)m(ts,)h(the)g(follo)m(wing)g
+(actions)h(are)f(tak)m(en.)199 3976 y(1.)61 b(If)24 b(the)g(command)g
+(name)g(con)m(tains)i(no)e(slashes,)i(the)e(shell)h(attempts)g(to)g(lo)
+s(cate)h(it.)39 b(If)24 b(there)g(exists)330 4085 y(a)h(shell)g
+(function)f(b)m(y)g(that)h(name,)h(that)f(function)f(is)h(in)m(v)m(ok)m
+(ed)h(as)e(describ)s(ed)g(in)g(Section)h(3.3)h([Shell)330
+4195 y(F)-8 b(unctions],)31 b(page)h(18.)199 4329 y(2.)61
+b(If)41 b(the)g(name)h(do)s(es)f(not)g(matc)m(h)i(a)e(function,)j(the)e
+(shell)f(searc)m(hes)i(for)e(it)h(in)f(the)g(list)h(of)g(shell)330
+4439 y(builtins.)e(If)30 b(a)h(matc)m(h)g(is)f(found,)g(that)h(builtin)
+f(is)g(in)m(v)m(ok)m(ed.)199 4573 y(3.)61 b(If)40 b(the)g(name)h(is)f
+(neither)h(a)f(shell)h(function)f(nor)g(a)g(builtin,)j(and)d(con)m
+(tains)h(no)g(slashes,)i(Bash)330 4682 y(searc)m(hes)c(eac)m(h)g
+(elemen)m(t)g(of)g Ft($PATH)d Fu(for)i(a)g(directory)h(con)m(taining)g
+(an)f(executable)h(\014le)f(b)m(y)g(that)330 4792 y(name.)56
+b(Bash)36 b(uses)f(a)h(hash)e(table)j(to)f(remem)m(b)s(er)f(the)h(full)
+f(pathnames)g(of)h(executable)h(\014les)e(to)330 4902
+y(a)m(v)m(oid)e(m)m(ultiple)f Ft(PATH)f Fu(searc)m(hes)i(\(see)f(the)g
+(description)g(of)f Ft(hash)g Fu(in)g(Section)i(4.1)f([Bourne)g(Shell)
+330 5011 y(Builtins],)37 b(page)f(44\).)55 b(A)35 b(full)g(searc)m(h)g
+(of)g(the)g(directories)h(in)f Ft($PATH)e Fu(is)i(p)s(erformed)f(only)h
+(if)g(the)330 5121 y(command)24 b(is)h(not)g(found)e(in)i(the)g(hash)f
+(table.)39 b(If)25 b(the)f(searc)m(h)i(is)e(unsuccessful,)h(the)g
+(shell)g(searc)m(hes)330 5230 y(for)e(a)h(de\014ned)e(shell)h(function)
+h(named)e Ft(command_not_found_handle)p Fu(.)32 b(If)23
+b(that)h(function)f(exists,)330 5340 y(it)33 b(is)f(in)m(v)m(ok)m(ed)i
+(in)e(a)h(separate)h(execution)f(en)m(vironmen)m(t)g(with)f(the)h
+(original)h(command)e(and)g(the)p eop end
+%%Page: 40 46
+TeXDict begin 40 45 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(40)330 299
+y(original)26 b(command's)e(argumen)m(ts)h(as)g(its)g(argumen)m(ts,)h
+(and)e(the)h(function's)f(exit)i(status)f(b)s(ecomes)330
+408 y(the)j(exit)g(status)g(of)f(that)h(subshell.)39
+b(If)27 b(that)h(function)f(is)h(not)g(de\014ned,)f(the)g(shell)h(prin)
+m(ts)f(an)g(error)330 518 y(message)k(and)f(returns)f(an)i(exit)g
+(status)g(of)f(127.)199 654 y(4.)61 b(If)33 b(the)g(searc)m(h)h(is)g
+(successful,)g(or)f(if)g(the)h(command)f(name)g(con)m(tains)i(one)f(or)
+f(more)g(slashes,)i(the)330 763 y(shell)g(executes)h(the)f(named)f
+(program)g(in)h(a)g(separate)h(execution)f(en)m(vironmen)m(t.)55
+b(Argumen)m(t)35 b(0)330 873 y(is)30 b(set)h(to)h(the)e(name)h(giv)m
+(en,)g(and)f(the)h(remaining)f(argumen)m(ts)h(to)g(the)g(command)f(are)
+h(set)g(to)g(the)330 983 y(argumen)m(ts)g(supplied,)e(if)h(an)m(y)-8
+b(.)199 1118 y(5.)61 b(If)35 b(this)h(execution)h(fails)f(b)s(ecause)g
+(the)f(\014le)h(is)g(not)g(in)f(executable)j(format,)f(and)e(the)h
+(\014le)g(is)g(not)330 1228 y(a)d(directory)-8 b(,)34
+b(it)f(is)g(assumed)e(to)j(b)s(e)d(a)i Fr(shell)g(script)h
+Fu(and)e(the)h(shell)f(executes)i(it)f(as)g(describ)s(ed)e(in)330
+1338 y(Section)g(3.8)h([Shell)e(Scripts],)g(page)i(42.)199
+1473 y(6.)61 b(If)38 b(the)h(command)f(w)m(as)h(not)g(b)s(egun)e(async)
+m(hronously)-8 b(,)42 b(the)c(shell)h(w)m(aits)h(for)e(the)h(command)f
+(to)330 1583 y(complete)32 b(and)e(collects)i(its)f(exit)g(status.)150
+1785 y Fk(3.7.3)63 b(Command)41 b(Execution)f(En)m(vironmen)m(t)150
+1932 y Fu(The)30 b(shell)g(has)h(an)f Fr(execution)h(en)m(vironmen)m(t)
+p Fu(,)h(whic)m(h)e(consists)h(of)f(the)h(follo)m(wing:)225
+2069 y Fq(\017)60 b Fu(op)s(en)32 b(\014les)g(inherited)g(b)m(y)h(the)f
+(shell)h(at)g(in)m(v)m(o)s(cation,)j(as)c(mo)s(di\014ed)g(b)m(y)g
+(redirections)h(supplied)e(to)330 2178 y(the)g Ft(exec)e
+Fu(builtin)225 2314 y Fq(\017)60 b Fu(the)28 b(curren)m(t)g(w)m(orking)
+h(directory)g(as)f(set)h(b)m(y)f Ft(cd)p Fu(,)g Ft(pushd)p
+Fu(,)g(or)g Ft(popd)p Fu(,)g(or)g(inherited)g(b)m(y)g(the)h(shell)f(at)
+330 2424 y(in)m(v)m(o)s(cation)225 2560 y Fq(\017)60
+b Fu(the)31 b(\014le)f(creation)i(mo)s(de)e(mask)g(as)h(set)g(b)m(y)f
+Ft(umask)f Fu(or)h(inherited)g(from)g(the)h(shell's)f(paren)m(t)225
+2695 y Fq(\017)60 b Fu(curren)m(t)30 b(traps)g(set)h(b)m(y)f
+Ft(trap)225 2831 y Fq(\017)60 b Fu(shell)30 b(parameters)f(that)h(are)g
+(set)g(b)m(y)g(v)-5 b(ariable)30 b(assignmen)m(t)g(or)g(with)f
+Ft(set)f Fu(or)i(inherited)f(from)g(the)330 2941 y(shell's)i(paren)m(t)
+f(in)g(the)h(en)m(vironmen)m(t)225 3077 y Fq(\017)60
+b Fu(shell)44 b(functions)f(de\014ned)f(during)h(execution)i(or)e
+(inherited)h(from)f(the)h(shell's)g(paren)m(t)f(in)h(the)330
+3186 y(en)m(vironmen)m(t)225 3322 y Fq(\017)60 b Fu(options)33
+b(enabled)g(at)h(in)m(v)m(o)s(cation)h(\(either)f(b)m(y)f(default)g(or)
+g(with)g(command-line)g(argumen)m(ts\))h(or)330 3432
+y(b)m(y)c Ft(set)225 3567 y Fq(\017)60 b Fu(options)31
+b(enabled)f(b)m(y)g Ft(shopt)f Fu(\(see)j(Section)f(4.3.2)h([The)e
+(Shopt)g(Builtin],)h(page)g(66\))225 3703 y Fq(\017)60
+b Fu(shell)31 b(aliases)g(de\014ned)f(with)g Ft(alias)f
+Fu(\(see)i(Section)g(6.6)h([Aliases],)g(page)f(94\))225
+3839 y Fq(\017)60 b Fu(v)-5 b(arious)50 b(pro)s(cess)f
+Fm(id)p Fu(s,)55 b(including)49 b(those)i(of)e(bac)m(kground)h(jobs)f
+(\(see)i(Section)g(3.2.4)g([Lists],)330 3948 y(page)31
+b(9\),)g(the)g(v)-5 b(alue)31 b(of)f Ft($$)p Fu(,)g(and)g(the)h(v)-5
+b(alue)31 b(of)f Ft($PPID)275 4112 y Fu(When)k(a)g(simple)h(command)f
+(other)g(than)g(a)h(builtin)f(or)g(shell)h(function)f(is)g(to)h(b)s(e)f
+(executed,)i(it)f(is)150 4221 y(in)m(v)m(ok)m(ed)25 b(in)f(a)g
+(separate)h(execution)g(en)m(vironmen)m(t)g(that)f(consists)g(of)h(the)
+f(follo)m(wing.)40 b(Unless)24 b(otherwise)150 4331 y(noted,)31
+b(the)f(v)-5 b(alues)31 b(are)g(inherited)f(from)g(the)g(shell.)225
+4468 y Fq(\017)60 b Fu(the)31 b(shell's)h(op)s(en)e(\014les,)i(plus)e
+(an)m(y)h(mo)s(di\014cations)h(and)e(additions)h(sp)s(eci\014ed)g(b)m
+(y)g(redirections)g(to)330 4578 y(the)g(command)225 4713
+y Fq(\017)60 b Fu(the)31 b(curren)m(t)f(w)m(orking)g(directory)225
+4849 y Fq(\017)60 b Fu(the)31 b(\014le)f(creation)i(mo)s(de)e(mask)225
+4985 y Fq(\017)60 b Fu(shell)32 b(v)-5 b(ariables)33
+b(and)e(functions)h(mark)m(ed)g(for)g(exp)s(ort,)g(along)h(with)f(v)-5
+b(ariables)32 b(exp)s(orted)g(for)g(the)330 5095 y(command,)e(passed)g
+(in)g(the)h(en)m(vironmen)m(t)g(\(see)g(Section)g(3.7.4)i([En)m
+(vironmen)m(t],)e(page)g(41\))225 5230 y Fq(\017)60 b
+Fu(traps)31 b(caugh)m(t)h(b)m(y)f(the)g(shell)h(are)f(reset)h(to)g(the)
+f(v)-5 b(alues)32 b(inherited)e(from)h(the)g(shell's)h(paren)m(t,)g
+(and)330 5340 y(traps)e(ignored)h(b)m(y)f(the)g(shell)h(are)g(ignored)p
+eop end
+%%Page: 41 47
+TeXDict begin 41 46 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(41)275 299
+y(A)41 b(command)g(in)m(v)m(ok)m(ed)i(in)e(this)h(separate)g(en)m
+(vironmen)m(t)g(cannot)g(a\013ect)h(the)f(shell's)g(execution)150
+408 y(en)m(vironmen)m(t.)275 552 y(Command)35 b(substitution,)j
+(commands)e(group)s(ed)f(with)i(paren)m(theses,)h(and)e(async)m
+(hronous)g(com-)150 662 y(mands)c(are)h(in)m(v)m(ok)m(ed)i(in)d(a)i
+(subshell)e(en)m(vironmen)m(t)h(that)h(is)f(a)g(duplicate)h(of)f(the)g
+(shell)g(en)m(vironmen)m(t,)150 772 y(except)i(that)g(traps)f(caugh)m
+(t)h(b)m(y)f(the)h(shell)f(are)g(reset)h(to)g(the)f(v)-5
+b(alues)35 b(that)g(the)f(shell)h(inherited)e(from)150
+881 y(its)g(paren)m(t)f(at)h(in)m(v)m(o)s(cation.)49
+b(Builtin)32 b(commands)g(that)h(are)g(in)m(v)m(ok)m(ed)h(as)e(part)g
+(of)h(a)f(pip)s(eline)g(are)h(also)150 991 y(executed)41
+b(in)f(a)h(subshell)e(en)m(vironmen)m(t.)72 b(Changes)40
+b(made)g(to)h(the)g(subshell)e(en)m(vironmen)m(t)i(cannot)150
+1100 y(a\013ect)32 b(the)f(shell's)f(execution)i(en)m(vironmen)m(t.)275
+1244 y(Subshells)c(spa)m(wned)i(to)h(execute)g(command)f(substitutions)
+g(inherit)g(the)g(v)-5 b(alue)31 b(of)f(the)h Ft(-e)e
+Fu(option)150 1354 y(from)23 b(the)i(paren)m(t)f(shell.)38
+b(When)24 b(not)g(in)g Fm(posix)f Fu(mo)s(de,)i(Bash)f(clears)h(the)f
+Ft(-e)f Fu(option)i(in)e(suc)m(h)h(subshells.)275 1498
+y(If)f(a)h(command)g(is)g(follo)m(w)m(ed)h(b)m(y)f(a)g(`)p
+Ft(&)p Fu(')g(and)f(job)h(con)m(trol)h(is)f(not)g(activ)m(e,)k(the)c
+(default)g(standard)f(input)150 1607 y(for)35 b(the)g(command)g(is)g
+(the)g(empt)m(y)h(\014le)f Ft(/dev/null)p Fu(.)52 b(Otherwise,)37
+b(the)e(in)m(v)m(ok)m(ed)h(command)f(inherits)150 1717
+y(the)c(\014le)f(descriptors)g(of)h(the)f(calling)i(shell)f(as)f(mo)s
+(di\014ed)g(b)m(y)g(redirections.)150 1926 y Fk(3.7.4)63
+b(En)m(vironmen)m(t)150 2073 y Fu(When)29 b(a)g(program)f(is)h(in)m(v)m
+(ok)m(ed)h(it)g(is)f(giv)m(en)g(an)g(arra)m(y)g(of)g(strings)g(called)h
+(the)f Fr(en)m(vironmen)m(t)p Fu(.)41 b(This)28 b(is)h(a)150
+2182 y(list)i(of)g(name-v)-5 b(alue)31 b(pairs,)f(of)h(the)f(form)g
+Ft(name=value)p Fu(.)275 2326 y(Bash)39 b(pro)m(vides)g(sev)m(eral)i(w)
+m(a)m(ys)g(to)f(manipulate)f(the)h(en)m(vironmen)m(t.)69
+b(On)38 b(in)m(v)m(o)s(cation,)44 b(the)c(shell)150 2436
+y(scans)g(its)h(o)m(wn)f(en)m(vironmen)m(t)h(and)f(creates)i(a)f
+(parameter)f(for)g(eac)m(h)i(name)e(found,)i(automatically)150
+2545 y(marking)26 b(it)g(for)g Fr(exp)s(ort)h Fu(to)g(c)m(hild)f(pro)s
+(cesses.)39 b(Executed)26 b(commands)g(inherit)g(the)g(en)m(vironmen)m
+(t.)39 b(The)150 2655 y Ft(export)c Fu(and)i(`)p Ft(declare)29
+b(-x)p Fu(')36 b(commands)h(allo)m(w)i(parameters)e(and)g(functions)g
+(to)h(b)s(e)e(added)h(to)h(and)150 2765 y(deleted)21
+b(from)f(the)h(en)m(vironmen)m(t.)38 b(If)20 b(the)h(v)-5
+b(alue)21 b(of)g(a)g(parameter)g(in)f(the)g(en)m(vironmen)m(t)i(is)e
+(mo)s(di\014ed,)i(the)150 2874 y(new)31 b(v)-5 b(alue)32
+b(b)s(ecomes)f(part)h(of)f(the)h(en)m(vironmen)m(t,)g(replacing)h(the)e
+(old.)44 b(The)31 b(en)m(vironmen)m(t)h(inherited)150
+2984 y(b)m(y)f(an)m(y)g(executed)h(command)f(consists)g(of)g(the)g
+(shell's)h(initial)g(en)m(vironmen)m(t,)g(whose)f(v)-5
+b(alues)31 b(ma)m(y)h(b)s(e)150 3093 y(mo)s(di\014ed)26
+b(in)g(the)h(shell,)h(less)f(an)m(y)g(pairs)f(remo)m(v)m(ed)i(b)m(y)f
+(the)g Ft(unset)e Fu(and)h(`)p Ft(export)j(-n)p Fu(')e(commands,)g
+(plus)150 3203 y(an)m(y)k(additions)f(via)h(the)g Ft(export)d
+Fu(and)i(`)p Ft(declare)f(-x)p Fu(')h(commands.)275 3347
+y(The)j(en)m(vironmen)m(t)i(for)f(an)m(y)g(simple)h(command)f(or)g
+(function)g(ma)m(y)g(b)s(e)g(augmen)m(ted)h(temp)s(orarily)150
+3457 y(b)m(y)c(pre\014xing)e(it)i(with)g(parameter)g(assignmen)m(ts,)h
+(as)e(describ)s(ed)g(in)g(Section)i(3.4)g([Shell)e(P)m(arameters],)150
+3566 y(page)g(20.)41 b(These)29 b(assignmen)m(t)i(statemen)m(ts)g
+(a\013ect)f(only)g(the)f(en)m(vironmen)m(t)h(seen)g(b)m(y)f(that)h
+(command.)275 3710 y(If)g(the)h Ft(-k)g Fu(option)g(is)g(set)h(\(see)g
+(Section)g(4.3.1)g([The)f(Set)g(Builtin],)h(page)g(62\),)h(then)e(all)g
+(parameter)150 3820 y(assignmen)m(ts)f(are)g(placed)h(in)e(the)h(en)m
+(vironmen)m(t)g(for)g(a)g(command,)f(not)h(just)f(those)i(that)f
+(precede)g(the)150 3929 y(command)g(name.)275 4073 y(When)h(Bash)h(in)m
+(v)m(ok)m(es)i(an)e(external)h(command,)f(the)g(v)-5
+b(ariable)33 b(`)p Ft($_)p Fu(')f(is)g(set)h(to)f(the)g(full)g
+(pathname)150 4183 y(of)f(the)f(command)g(and)g(passed)g(to)h(that)g
+(command)f(in)g(its)h(en)m(vironmen)m(t.)150 4392 y Fk(3.7.5)63
+b(Exit)40 b(Status)150 4538 y Fu(The)26 b(exit)h(status)f(of)g(an)g
+(executed)h(command)f(is)g(the)h(v)-5 b(alue)26 b(returned)f(b)m(y)h
+(the)g Fr(w)m(aitpid)k Fu(system)d(call)g(or)150 4648
+y(equiv)-5 b(alen)m(t)33 b(function.)45 b(Exit)32 b(statuses)g(fall)g
+(b)s(et)m(w)m(een)h(0)f(and)f(255,)i(though,)f(as)g(explained)g(b)s
+(elo)m(w,)h(the)150 4758 y(shell)i(ma)m(y)g(use)f(v)-5
+b(alues)35 b(ab)s(o)m(v)m(e)g(125)h(sp)s(ecially)-8 b(.)54
+b(Exit)35 b(statuses)g(from)f(shell)h(builtins)f(and)f(comp)s(ound)150
+4867 y(commands)j(are)g(also)h(limited)g(to)g(this)f(range.)58
+b(Under)36 b(certain)h(circumstances,)h(the)e(shell)h(will)f(use)150
+4977 y(sp)s(ecial)31 b(v)-5 b(alues)31 b(to)g(indicate)g(sp)s(eci\014c)
+f(failure)h(mo)s(des.)275 5121 y(F)-8 b(or)32 b(the)g(shell's)g(purp)s
+(oses,)e(a)j(command)e(whic)m(h)h(exits)g(with)g(a)g(zero)g(exit)h
+(status)f(has)f(succeeded.)150 5230 y(A)e(non-zero)h(exit)g(status)g
+(indicates)g(failure.)40 b(This)28 b(seemingly)i(coun)m(ter-in)m
+(tuitiv)m(e)i(sc)m(heme)e(is)f(used)g(so)150 5340 y(there)34
+b(is)g(one)g(w)m(ell-de\014ned)g(w)m(a)m(y)g(to)h(indicate)g(success)f
+(and)f(a)h(v)-5 b(ariet)m(y)35 b(of)f(w)m(a)m(ys)h(to)f(indicate)h(v)-5
+b(arious)p eop end
+%%Page: 42 48
+TeXDict begin 42 47 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(42)150 299
+y(failure)38 b(mo)s(des.)62 b(When)37 b(a)h(command)f(terminates)i(on)e
+(a)h(fatal)h(signal)g(whose)e(n)m(um)m(b)s(er)f(is)i
+Fr(N)p Fu(,)i(Bash)150 408 y(uses)30 b(the)g(v)-5 b(alue)31
+b(128)p Ft(+)p Fr(N)42 b Fu(as)30 b(the)h(exit)g(status.)275
+537 y(If)k(a)h(command)g(is)g(not)g(found,)g(the)g(c)m(hild)h(pro)s
+(cess)e(created)i(to)g(execute)g(it)g(returns)d(a)j(status)f(of)150
+647 y(127.)42 b(If)30 b(a)h(command)f(is)g(found)f(but)h(is)g(not)h
+(executable,)h(the)f(return)e(status)i(is)f(126.)275
+776 y(If)i(a)i(command)f(fails)g(b)s(ecause)g(of)h(an)f(error)f(during)
+g(expansion)h(or)g(redirection,)i(the)f(exit)g(status)150
+885 y(is)c(greater)i(than)e(zero.)275 1014 y(The)38 b(exit)h(status)g
+(is)g(used)f(b)m(y)g(the)h(Bash)g(conditional)h(commands)e(\(see)h
+(Section)h(3.2.5.2)h([Con-)150 1123 y(ditional)i(Constructs],)h(page)f
+(11\))g(and)e(some)i(of)f(the)g(list)g(constructs)g(\(see)h(Section)f
+(3.2.4)i([Lists],)150 1233 y(page)31 b(9\).)275 1362
+y(All)40 b(of)g(the)h(Bash)f(builtins)f(return)g(an)h(exit)h(status)g
+(of)f(zero)h(if)f(they)g(succeed)g(and)g(a)g(non-zero)150
+1471 y(status)34 b(on)f(failure,)i(so)f(they)g(ma)m(y)g(b)s(e)f(used)g
+(b)m(y)g(the)h(conditional)h(and)e(list)h(constructs.)50
+b(All)35 b(builtins)150 1581 y(return)e(an)i(exit)g(status)g(of)f(2)h
+(to)g(indicate)h(incorrect)f(usage,)h(generally)g(in)m(v)-5
+b(alid)35 b(options)g(or)f(missing)150 1691 y(argumen)m(ts.)150
+1878 y Fk(3.7.6)63 b(Signals)150 2025 y Fu(When)36 b(Bash)g(is)h(in)m
+(teractiv)m(e,)j(in)c(the)h(absence)f(of)h(an)m(y)f(traps,)i(it)e
+(ignores)h Ft(SIGTERM)d Fu(\(so)j(that)g(`)p Ft(kill)150
+2135 y(0)p Fu(')c(do)s(es)g(not)g(kill)g(an)g(in)m(teractiv)m(e)j
+(shell\),)f(and)d Ft(SIGINT)f Fu(is)i(caugh)m(t)h(and)f(handled)f(\(so)
+h(that)h(the)f Ft(wait)150 2244 y Fu(builtin)24 b(is)h(in)m
+(terruptible\).)39 b(When)24 b(Bash)g(receiv)m(es)j(a)d
+Ft(SIGINT)p Fu(,)h(it)g(breaks)f(out)h(of)f(an)m(y)h(executing)h(lo)s
+(ops.)150 2354 y(In)31 b(all)h(cases,)h(Bash)f(ignores)g
+Ft(SIGQUIT)p Fu(.)42 b(If)32 b(job)f(con)m(trol)i(is)e(in)h(e\013ect)h
+(\(see)f(Chapter)f(7)h([Job)g(Con)m(trol],)150 2464 y(page)f(107\),)h
+(Bash)f(ignores)g Ft(SIGTTIN)p Fu(,)d Ft(SIGTTOU)p Fu(,)h(and)h
+Ft(SIGTSTP)p Fu(.)275 2592 y(Non-builtin)h(commands)g(started)g(b)m(y)g
+(Bash)h(ha)m(v)m(e)g(signal)g(handlers)e(set)i(to)g(the)g(v)-5
+b(alues)31 b(inherited)150 2702 y(b)m(y)37 b(the)h(shell)g(from)f(its)h
+(paren)m(t.)62 b(When)38 b(job)f(con)m(trol)i(is)e(not)h(in)f
+(e\013ect,)k(async)m(hronous)c(commands)150 2812 y(ignore)f
+Ft(SIGINT)e Fu(and)h Ft(SIGQUIT)e Fu(in)j(addition)f(to)i(these)f
+(inherited)f(handlers.)55 b(Commands)35 b(run)f(as)i(a)150
+2921 y(result)27 b(of)h(command)f(substitution)h(ignore)g(the)g(k)m
+(eyb)s(oard-generated)g(job)g(con)m(trol)h(signals)f
+Ft(SIGTTIN)p Fu(,)150 3031 y Ft(SIGTTOU)p Fu(,)h(and)g
+Ft(SIGTSTP)p Fu(.)275 3160 y(The)h(shell)i(exits)g(b)m(y)f(default)g
+(up)s(on)f(receipt)i(of)f(a)h Ft(SIGHUP)p Fu(.)42 b(Before)32
+b(exiting,)h(an)e(in)m(teractiv)m(e)j(shell)150 3269
+y(resends)41 b(the)i Ft(SIGHUP)e Fu(to)i(all)g(jobs,)i(running)c(or)h
+(stopp)s(ed.)76 b(Stopp)s(ed)41 b(jobs)h(are)h(sen)m(t)g
+Ft(SIGCONT)d Fu(to)150 3379 y(ensure)32 b(that)h(they)g(receiv)m(e)i
+(the)e Ft(SIGHUP)p Fu(.)47 b(T)-8 b(o)33 b(prev)m(en)m(t)g(the)g(shell)
+g(from)g(sending)f(the)h Ft(SIGHUP)e Fu(signal)150 3488
+y(to)i(a)g(particular)g(job,)g(it)g(should)f(b)s(e)g(remo)m(v)m(ed)h
+(from)g(the)f(jobs)g(table)i(with)e(the)h Ft(disown)e
+Fu(builtin)h(\(see)150 3598 y(Section)c(7.2)g([Job)e(Con)m(trol)i
+(Builtins],)g(page)g(108\))h(or)e(mark)m(ed)g(to)g(not)g(receiv)m(e)i
+Ft(SIGHUP)c Fu(using)i Ft(disown)150 3707 y(-h)p Fu(.)275
+3836 y(If)38 b(the)h Ft(huponexit)e Fu(shell)i(option)g(has)g(b)s(een)f
+(set)i(with)f Ft(shopt)e Fu(\(see)j(Section)g(4.3.2)h([The)e(Shopt)150
+3946 y(Builtin],)31 b(page)g(66\),)h(Bash)f(sends)e(a)i
+Ft(SIGHUP)e Fu(to)i(all)g(jobs)f(when)f(an)i(in)m(teractiv)m(e)i(login)
+e(shell)g(exits.)275 4075 y(If)38 b(Bash)h(is)g(w)m(aiting)h(for)f(a)g
+(command)f(to)i(complete)g(and)e(receiv)m(es)j(a)e(signal)h(for)e(whic)
+m(h)h(a)g(trap)150 4184 y(has)c(b)s(een)f(set,)i(the)f(trap)g(will)g
+(not)g(b)s(e)f(executed)i(un)m(til)f(the)g(command)f(completes.)55
+b(When)35 b(Bash)g(is)150 4294 y(w)m(aiting)j(for)f(an)g(async)m
+(hronous)g(command)g(via)h(the)f Ft(wait)f Fu(builtin,)i(the)g
+(reception)g(of)f(a)g(signal)h(for)150 4403 y(whic)m(h)d(a)g(trap)g
+(has)g(b)s(een)f(set)h(will)h(cause)f(the)g Ft(wait)f
+Fu(builtin)h(to)g(return)f(immediately)i(with)f(an)g(exit)150
+4513 y(status)c(greater)g(than)f(128,)i(immediately)g(after)f(whic)m(h)
+f(the)h(trap)f(is)g(executed.)150 4742 y Fs(3.8)68 b(Shell)45
+b(Scripts)150 4902 y Fu(A)30 b(shell)f(script)h(is)f(a)h(text)h(\014le)
+f(con)m(taining)h(shell)f(commands.)40 b(When)29 b(suc)m(h)g(a)h
+(\014le)g(is)f(used)g(as)h(the)g(\014rst)150 5011 y(non-option)c
+(argumen)m(t)h(when)e(in)m(v)m(oking)i(Bash,)g(and)f(neither)g(the)g
+Ft(-c)g Fu(nor)f Ft(-s)h Fu(option)g(is)g(supplied)f(\(see)150
+5121 y(Section)39 b(6.1)g([In)m(v)m(oking)g(Bash],)h(page)f(86\),)i
+(Bash)d(reads)g(and)f(executes)i(commands)f(from)f(the)i(\014le,)150
+5230 y(then)32 b(exits.)46 b(This)32 b(mo)s(de)f(of)i(op)s(eration)f
+(creates)i(a)e(non-in)m(teractiv)m(e)j(shell.)46 b(The)31
+b(shell)i(\014rst)e(searc)m(hes)150 5340 y(for)d(the)g(\014le)g(in)g
+(the)g(curren)m(t)f(directory)-8 b(,)30 b(and)d(lo)s(oks)i(in)e(the)i
+(directories)g(in)e Ft($PATH)g Fu(if)h(not)g(found)e(there.)p
+eop end
+%%Page: 43 49
+TeXDict begin 43 48 bop 150 -116 a Fu(Chapter)30 b(3:)41
+b(Basic)32 b(Shell)e(F)-8 b(eatures)2246 b(43)275 299
+y(When)34 b(Bash)h(runs)e(a)i(shell)g(script,)g(it)h(sets)f(the)f(sp)s
+(ecial)i(parameter)f Ft(0)f Fu(to)h(the)g(name)g(of)g(the)g(\014le,)150
+408 y(rather)k(than)g(the)h(name)f(of)h(the)f(shell,)j(and)d(the)h(p)s
+(ositional)g(parameters)f(are)h(set)g(to)g(the)g(remain-)150
+518 y(ing)f(argumen)m(ts,)j(if)d(an)m(y)g(are)g(giv)m(en.)67
+b(If)39 b(no)g(additional)g(argumen)m(ts)h(are)f(supplied,)h(the)f(p)s
+(ositional)150 628 y(parameters)31 b(are)f(unset.)275
+762 y(A)39 b(shell)h(script)f(ma)m(y)h(b)s(e)f(made)h(executable)h(b)m
+(y)e(using)g(the)h Ft(chmod)e Fu(command)h(to)h(turn)e(on)i(the)150
+872 y(execute)j(bit.)73 b(When)41 b(Bash)g(\014nds)e(suc)m(h)i(a)h
+(\014le)f(while)g(searc)m(hing)h(the)f Ft($PATH)f Fu(for)h(a)h
+(command,)h(it)150 981 y(spa)m(wns)30 b(a)g(subshell)g(to)h(execute)h
+(it.)41 b(In)30 b(other)g(w)m(ords,)g(executing)390 1116
+y Ft(filename)46 b Fj(arguments)150 1250 y Fu(is)30 b(equiv)-5
+b(alen)m(t)32 b(to)f(executing)390 1385 y Ft(bash)47
+b(filename)e Fj(arguments)150 1519 y Fu(if)30 b Ft(filename)d
+Fu(is)j(an)f(executable)j(shell)e(script.)40 b(This)29
+b(subshell)g(reinitializes)i(itself,)g(so)f(that)h(the)e(e\013ect)150
+1629 y(is)36 b(as)h(if)g(a)f(new)g(shell)h(had)f(b)s(een)g(in)m(v)m(ok)
+m(ed)h(to)h(in)m(terpret)e(the)h(script,)h(with)e(the)h(exception)h
+(that)f(the)150 1738 y(lo)s(cations)25 b(of)g(commands)e(remem)m(b)s
+(ered)h(b)m(y)g(the)g(paren)m(t)g(\(see)h(the)f(description)g(of)g
+Ft(hash)f Fu(in)h(Section)h(4.1)150 1848 y([Bourne)30
+b(Shell)h(Builtins],)g(page)g(44\))h(are)e(retained)h(b)m(y)f(the)h(c)m
+(hild.)275 1983 y(Most)36 b(v)m(ersions)g(of)g(Unix)f(mak)m(e)h(this)g
+(a)g(part)f(of)h(the)g(op)s(erating)g(system's)f(command)h(execution)
+150 2092 y(mec)m(hanism.)50 b(If)33 b(the)g(\014rst)g(line)h(of)f(a)h
+(script)f(b)s(egins)g(with)g(the)g(t)m(w)m(o)i(c)m(haracters)g(`)p
+Ft(#!)p Fu(',)f(the)g(remainder)150 2202 y(of)27 b(the)g(line)g(sp)s
+(eci\014es)g(an)g(in)m(terpreter)g(for)g(the)g(program)g(and,)g(dep)s
+(ending)e(on)i(the)g(op)s(erating)h(system,)150 2311
+y(one)e(or)g(more)g(optional)h(argumen)m(ts)f(for)g(that)g(in)m
+(terpreter.)40 b(Th)m(us,)26 b(y)m(ou)g(can)g(sp)s(ecify)g(Bash,)h
+Ft(awk)p Fu(,)f(P)m(erl,)150 2421 y(or)k(some)h(other)g(in)m(terpreter)
+g(and)e(write)i(the)f(rest)h(of)g(the)f(script)g(\014le)h(in)f(that)h
+(language.)275 2555 y(The)k(argumen)m(ts)h(to)h(the)f(in)m(terpreter)h
+(consist)f(of)h(one)f(or)g(more)g(optional)h(argumen)m(ts)f(follo)m
+(wing)150 2665 y(the)e(in)m(terpreter)g(name)g(on)g(the)g(\014rst)g
+(line)g(of)g(the)g(script)g(\014le,)h(follo)m(w)m(ed)h(b)m(y)e(the)g
+(name)g(of)g(the)g(script)150 2775 y(\014le,)k(follo)m(w)m(ed)g(b)m(y)e
+(the)g(rest)g(of)g(the)h(argumen)m(ts)f(supplied)f(to)i(the)f(script.)
+58 b(The)35 b(details)i(of)g(ho)m(w)f(the)150 2884 y(in)m(terpreter)26
+b(line)g(is)g(split)g(in)m(to)h(an)f(in)m(terpreter)g(name)g(and)f(a)h
+(set)h(of)e(argumen)m(ts)i(v)-5 b(ary)25 b(across)i(systems.)150
+2994 y(Bash)j(will)f(p)s(erform)g(this)g(action)i(on)e(op)s(erating)h
+(systems)g(that)g(do)f(not)h(handle)f(it)h(themselv)m(es.)42
+b(Note)150 3103 y(that)e(some)g(older)g(v)m(ersions)g(of)g(Unix)f
+(limit)i(the)f(in)m(terpreter)g(name)g(and)f(a)h(single)g(argumen)m(t)g
+(to)h(a)150 3213 y(maxim)m(um)21 b(of)g(32)h(c)m(haracters,)j(so)c
+(it's)h(not)g(p)s(ortable)f(to)h(assume)e(that)i(using)f(more)g(than)g
+(one)g(argumen)m(t)150 3323 y(will)31 b(w)m(ork.)275
+3457 y(Bash)h(scripts)g(often)g(b)s(egin)g(with)g Ft(#!)e(/bin/bash)g
+Fu(\(assuming)i(that)h(Bash)f(has)g(b)s(een)f(installed)i(in)150
+3567 y Ft(/bin)p Fu(\),)26 b(since)h(this)f(ensures)f(that)i(Bash)f
+(will)h(b)s(e)f(used)f(to)i(in)m(terpret)f(the)h(script,)g(ev)m(en)g
+(if)f(it)h(is)f(executed)150 3676 y(under)h(another)h(shell.)41
+b(It's)28 b(a)h(common)g(idiom)f(to)h(use)f Ft(env)g
+Fu(to)h(\014nd)e Ft(bash)g Fu(ev)m(en)i(if)f(it's)i(b)s(een)d
+(installed)150 3786 y(in)h(another)g(directory:)40 b
+Ft(#!/usr/bin/env)27 b(bash)f Fu(will)j(\014nd)d(the)j(\014rst)e(o)s
+(ccurrence)h(of)g Ft(bash)f Fu(in)h Ft($PATH)p Fu(.)p
+eop end
+%%Page: 44 50
+TeXDict begin 44 49 bop 3659 -116 a Fu(44)150 299 y Fp(4)80
+b(Shell)53 b(Builtin)f(Commands)150 499 y Fu(Builtin)34
+b(commands)f(are)h(con)m(tained)g(within)f(the)h(shell)g(itself.)50
+b(When)34 b(the)f(name)h(of)f(a)h(builtin)f(com-)150
+608 y(mand)26 b(is)i(used)e(as)i(the)g(\014rst)e(w)m(ord)h(of)h(a)f
+(simple)h(command)f(\(see)h(Section)g(3.2.2)h([Simple)f(Commands],)150
+718 y(page)21 b(8\),)j(the)d(shell)g(executes)h(the)f(command)f
+(directly)-8 b(,)24 b(without)d(in)m(v)m(oking)h(another)f(program.)37
+b(Builtin)150 828 y(commands)f(are)h(necessary)g(to)g(implemen)m(t)g
+(functionalit)m(y)h(imp)s(ossible)e(or)h(incon)m(v)m(enien)m(t)h(to)f
+(obtain)150 937 y(with)30 b(separate)h(utilities.)275
+1065 y(This)c(section)j(brie\015y)e(describ)s(es)g(the)h(builtins)f
+(whic)m(h)g(Bash)h(inherits)f(from)g(the)h(Bourne)g(Shell,)g(as)150
+1174 y(w)m(ell)i(as)g(the)g(builtin)e(commands)h(whic)m(h)h(are)f
+(unique)g(to)h(or)f(ha)m(v)m(e)i(b)s(een)d(extended)i(in)f(Bash.)275
+1302 y(Sev)m(eral)45 b(builtin)e(commands)h(are)h(describ)s(ed)e(in)h
+(other)g(c)m(hapters:)69 b(builtin)43 b(commands)h(whic)m(h)150
+1412 y(pro)m(vide)23 b(the)h(Bash)f(in)m(terface)i(to)f(the)g(job)f
+(con)m(trol)i(facilities)g(\(see)f(Section)h(7.2)f([Job)f(Con)m(trol)h
+(Builtins],)150 1521 y(page)37 b(108\),)i(the)d(directory)g(stac)m(k)h
+(\(see)g(Section)g(6.8.1)g([Directory)h(Stac)m(k)f(Builtins],)h(page)e
+(97\),)j(the)150 1631 y(command)23 b(history)h(\(see)g(Section)g(9.2)h
+([Bash)f(History)g(Builtins],)h(page)g(146\),)h(and)d(the)h
+(programmable)150 1740 y(completion)32 b(facilities)g(\(see)g(Section)f
+(8.7)g([Programmable)g(Completion)g(Builtins],)g(page)h(139\).)275
+1868 y(Man)m(y)f(of)f(the)h(builtins)e(ha)m(v)m(e)j(b)s(een)e(extended)
+g(b)m(y)g Fm(posix)g Fu(or)g(Bash.)275 1996 y(Unless)20
+b(otherwise)h(noted,)h(eac)m(h)g(builtin)e(command)g(do)s(cumen)m(ted)g
+(as)h(accepting)h(options)e(preceded)150 2105 y(b)m(y)42
+b(`)p Ft(-)p Fu(')g(accepts)h(`)p Ft(--)p Fu(')f(to)h(signify)f(the)g
+(end)f(of)h(the)g(options.)76 b(The)41 b Ft(:)p Fu(,)k
+Ft(true)p Fu(,)f Ft(false)p Fu(,)g(and)d Ft(test)p Fu(/)p
+Ft([)150 2215 y Fu(builtins)32 b(do)g(not)h(accept)h(options)f(and)f
+(do)g(not)h(treat)g(`)p Ft(--)p Fu(')g(sp)s(ecially)-8
+b(.)48 b(The)32 b Ft(exit)p Fu(,)g Ft(logout)p Fu(,)f
+Ft(return)p Fu(,)150 2325 y Ft(break)p Fu(,)38 b Ft(continue)p
+Fu(,)f Ft(let)p Fu(,)i(and)d Ft(shift)g Fu(builtins)h(accept)i(and)e
+(pro)s(cess)g(argumen)m(ts)h(b)s(eginning)e(with)150
+2434 y(`)p Ft(-)p Fu(')h(without)f(requiring)g(`)p Ft(--)p
+Fu('.)59 b(Other)36 b(builtins)g(that)h(accept)h(argumen)m(ts)f(but)f
+(are)h(not)g(sp)s(eci\014ed)f(as)150 2544 y(accepting)28
+b(options)f(in)m(terpret)g(argumen)m(ts)g(b)s(eginning)e(with)i(`)p
+Ft(-)p Fu(')f(as)h(in)m(v)-5 b(alid)27 b(options)g(and)f(require)g(`)p
+Ft(--)p Fu(')150 2653 y(to)31 b(prev)m(en)m(t)g(this)f(in)m
+(terpretation.)150 2880 y Fs(4.1)68 b(Bourne)45 b(Shell)g(Builtins)150
+3040 y Fu(The)22 b(follo)m(wing)j(shell)d(builtin)h(commands)f(are)h
+(inherited)g(from)f(the)h(Bourne)g(Shell.)38 b(These)22
+b(commands)150 3149 y(are)31 b(implemen)m(ted)g(as)f(sp)s(eci\014ed)g
+(b)m(y)g(the)h Fm(posix)e Fu(standard.)150 3295 y Ft(:)h
+Fu(\(a)h(colon\))870 3405 y Ft(:)47 b([)p Fj(arguments)p
+Ft(])630 3532 y Fu(Do)c(nothing)f(b)s(ey)m(ond)g(expanding)f
+Fr(argumen)m(ts)46 b Fu(and)c(p)s(erforming)f(redirections.)76
+b(The)630 3642 y(return)29 b(status)i(is)f(zero.)150
+3788 y Ft(.)g Fu(\(a)h(p)s(erio)s(d\))870 3897 y Ft(.)47
+b Fj(filename)f Ft([)p Fj(arguments)p Ft(])630 4025 y
+Fu(Read)34 b(and)f(execute)i(commands)e(from)g(the)h
+Fr(\014lename)39 b Fu(argumen)m(t)34 b(in)f(the)h(curren)m(t)g(shell)
+630 4134 y(con)m(text.)45 b(If)31 b Fr(\014lename)37
+b Fu(do)s(es)31 b(not)g(con)m(tain)i(a)e(slash,)h(the)g
+Ft(PATH)e Fu(v)-5 b(ariable)32 b(is)f(used)f(to)i(\014nd)630
+4244 y Fr(\014lename)p Fu(.)52 b(When)34 b(Bash)g(is)h(not)f(in)g
+Fm(posix)f Fu(mo)s(de,)i(the)g(curren)m(t)f(directory)g(is)g(searc)m
+(hed)630 4354 y(if)d Fr(\014lename)36 b Fu(is)31 b(not)h(found)d(in)i
+Ft($PATH)p Fu(.)41 b(If)31 b(an)m(y)g Fr(argumen)m(ts)k
+Fu(are)c(supplied,)f(they)i(b)s(ecome)630 4463 y(the)e(p)s(ositional)h
+(parameters)g(when)e Fr(\014lename)35 b Fu(is)30 b(executed.)42
+b(Otherwise)30 b(the)g(p)s(ositional)630 4573 y(parameters)40
+b(are)f(unc)m(hanged.)67 b(If)39 b(the)g Ft(-T)g Fu(option)g(is)h
+(enabled,)h Ft(source)d Fu(inherits)h(an)m(y)630 4682
+y(trap)31 b(on)g Ft(DEBUG)p Fu(;)f(if)i(it)f(is)g(not,)h(an)m(y)g
+Ft(DEBUG)e Fu(trap)h(string)g(is)g(sa)m(v)m(ed)h(and)f(restored)g
+(around)630 4792 y(the)41 b(call)i(to)e Ft(source)p Fu(,)i(and)d
+Ft(source)f Fu(unsets)i(the)g Ft(DEBUG)f Fu(trap)h(while)g(it)g
+(executes.)74 b(If)630 4902 y Ft(-T)39 b Fu(is)g(not)h(set,)j(and)c
+(the)g(sourced)h(\014le)f(c)m(hanges)i(the)e Ft(DEBUG)f
+Fu(trap,)k(the)e(new)f(v)-5 b(alue)40 b(is)630 5011 y(retained)e(when)e
+Ft(source)g Fu(completes.)63 b(The)37 b(return)f(status)h(is)h(the)f
+(exit)i(status)e(of)h(the)630 5121 y(last)g(command)e(executed,)j(or)e
+(zero)h(if)e(no)h(commands)f(are)h(executed.)61 b(If)36
+b Fr(\014lename)42 b Fu(is)630 5230 y(not)f(found,)h(or)e(cannot)h(b)s
+(e)f(read,)j(the)e(return)e(status)i(is)g(non-zero.)71
+b(This)40 b(builtin)g(is)630 5340 y(equiv)-5 b(alen)m(t)32
+b(to)f Ft(source)p Fu(.)p eop end
+%%Page: 45 51
+TeXDict begin 45 50 bop 150 -116 a Fu(Chapter)30 b(4:)41
+b(Shell)30 b(Builtin)h(Commands)2069 b(45)150 299 y Ft(break)870
+428 y(break)46 b([)p Fj(n)p Ft(])630 558 y Fu(Exit)f(from)f(a)g
+Ft(for)p Fu(,)k Ft(while)p Fu(,)e Ft(until)p Fu(,)h(or)d
+Ft(select)f Fu(lo)s(op.)83 b(If)44 b Fr(n)g Fu(is)g(supplied,)j(the)e
+Fr(n)p Fu(th)630 667 y(enclosing)c(lo)s(op)f(is)h(exited.)70
+b Fr(n)40 b Fu(m)m(ust)g(b)s(e)f(greater)j(than)d(or)i(equal)f(to)h(1.)
+70 b(The)40 b(return)630 777 y(status)31 b(is)f(zero)h(unless)f
+Fr(n)g Fu(is)g(not)h(greater)g(than)g(or)f(equal)h(to)g(1.)150
+927 y Ft(cd)870 1056 y(cd)47 b([-L|[-P)f([-e]])g([-@])h([)p
+Fj(directory)p Ft(])630 1186 y Fu(Change)27 b(the)g(curren)m(t)f(w)m
+(orking)h(directory)g(to)h Fr(directory)p Fu(.)40 b(If)26
+b Fr(directory)35 b Fu(is)27 b(not)g(supplied,)630 1295
+y(the)f(v)-5 b(alue)26 b(of)f(the)h Ft(HOME)e Fu(shell)i(v)-5
+b(ariable)26 b(is)g(used.)38 b(An)m(y)25 b(additional)i(argumen)m(ts)e
+(follo)m(wing)630 1405 y Fr(directory)39 b Fu(are)31
+b(ignored.)41 b(If)30 b(the)h(shell)g(v)-5 b(ariable)31
+b Ft(CDPATH)e Fu(exists,)i(it)g(is)g(used)f(as)g(a)h(searc)m(h)630
+1514 y(path:)39 b(eac)m(h)29 b(directory)g(name)f(in)f
+Ft(CDPATH)g Fu(is)h(searc)m(hed)g(for)g Fr(directory)p
+Fu(,)h(with)f(alternativ)m(e)630 1624 y(directory)j(names)g(in)f
+Ft(CDPATH)f Fu(separated)j(b)m(y)e(a)h(colon)h(\(`)p
+Ft(:)p Fu('\).)43 b(If)30 b Fr(directory)39 b Fu(b)s(egins)30
+b(with)630 1733 y(a)h(slash,)f Ft(CDPATH)f Fu(is)h(not)h(used.)630
+1863 y(The)g Ft(-P)h Fu(option)g(means)g(to)h(not)f(follo)m(w)h(sym)m
+(b)s(olic)g(links:)44 b(sym)m(b)s(olic)32 b(links)g(are)g(resolv)m(ed)
+630 1973 y(while)41 b Ft(cd)f Fu(is)h(tra)m(v)m(ersing)h
+Fr(directory)49 b Fu(and)40 b(b)s(efore)g(pro)s(cessing)h(an)f
+(instance)i(of)f(`)p Ft(..)p Fu(')f(in)630 2082 y Fr(directory)p
+Fu(.)630 2212 y(By)34 b(default,)h(or)e(when)g(the)g
+Ft(-L)g Fu(option)h(is)g(supplied,)f(sym)m(b)s(olic)h(links)f(in)h
+Fr(directory)42 b Fu(are)630 2321 y(resolv)m(ed)31 b(after)g
+Ft(cd)f Fu(pro)s(cesses)g(an)g(instance)h(of)g(`)p Ft(..)p
+Fu(')f(in)g Fr(directory)p Fu(.)630 2451 y(If)35 b(`)p
+Ft(..)p Fu(')f(app)s(ears)h(in)f Fr(directory)p Fu(,)j(it)f(is)f(pro)s
+(cessed)f(b)m(y)h(remo)m(ving)h(the)f(immediately)h(pre-)630
+2560 y(ceding)31 b(pathname)f(comp)s(onen)m(t,)h(bac)m(k)g(to)g(a)g
+(slash)f(or)h(the)f(b)s(eginning)g(of)g Fr(directory)p
+Fu(.)630 2690 y(If)i(the)i Ft(-e)e Fu(option)h(is)g(supplied)f(with)g
+Ft(-P)h Fu(and)f(the)h(curren)m(t)g(w)m(orking)g(directory)g(cannot)630
+2800 y(b)s(e)k(successfully)g(determined)g(after)i(a)e(successful)h
+(directory)g(c)m(hange,)i Ft(cd)d Fu(will)h(return)630
+2909 y(an)30 b(unsuccessful)f(status.)630 3039 y(On)41
+b(systems)h(that)h(supp)s(ort)d(it,)46 b(the)c Ft(-@)g
+Fu(option)g(presen)m(ts)g(the)g(extended)g(attributes)630
+3148 y(asso)s(ciated)32 b(with)e(a)h(\014le)f(as)h(a)f(directory)-8
+b(.)630 3278 y(If)41 b Fr(directory)49 b Fu(is)41 b(`)p
+Ft(-)p Fu(',)j(it)e(is)f(con)m(v)m(erted)h(to)g Ft($OLDPWD)d
+Fu(b)s(efore)i(the)g(directory)h(c)m(hange)g(is)630 3387
+y(attempted.)630 3517 y(If)33 b(a)h(non-empt)m(y)g(directory)g(name)f
+(from)g Ft(CDPATH)f Fu(is)h(used,)h(or)g(if)f(`)p Ft(-)p
+Fu(')h(is)f(the)h(\014rst)f(argu-)630 3626 y(men)m(t,)28
+b(and)e(the)h(directory)g(c)m(hange)h(is)f(successful,)h(the)f
+(absolute)g(pathname)g(of)f(the)h(new)630 3736 y(w)m(orking)k
+(directory)g(is)f(written)g(to)i(the)e(standard)g(output.)630
+3866 y(The)f(return)g(status)h(is)f(zero)i(if)e(the)h(directory)g(is)g
+(successfully)g(c)m(hanged,)g(non-zero)g(oth-)630 3975
+y(erwise.)150 4125 y Ft(continue)870 4254 y(continue)46
+b([)p Fj(n)p Ft(])630 4384 y Fu(Resume)32 b(the)g(next)g(iteration)i
+(of)e(an)g(enclosing)h Ft(for)p Fu(,)f Ft(while)p Fu(,)f
+Ft(until)p Fu(,)g(or)h Ft(select)f Fu(lo)s(op.)630 4493
+y(If)f Fr(n)h Fu(is)g(supplied,)e(the)j(execution)g(of)f(the)g
+Fr(n)p Fu(th)f(enclosing)i(lo)s(op)f(is)f(resumed.)42
+b Fr(n)30 b Fu(m)m(ust)h(b)s(e)630 4603 y(greater)39
+b(than)f(or)g(equal)g(to)h(1.)63 b(The)38 b(return)e(status)j(is)e
+(zero)i(unless)e Fr(n)h Fu(is)g(not)g(greater)630 4712
+y(than)30 b(or)g(equal)h(to)g(1.)150 4862 y Ft(eval)870
+4991 y(eval)47 b([)p Fj(arguments)p Ft(])630 5121 y Fu(The)25
+b(argumen)m(ts)h(are)g(concatenated)i(together)f(in)m(to)f(a)g(single)h
+(command,)f(whic)m(h)g(is)f(then)630 5230 y(read)35 b(and)g(executed,)j
+(and)d(its)h(exit)g(status)g(returned)e(as)h(the)h(exit)g(status)g(of)g
+Ft(eval)p Fu(.)54 b(If)630 5340 y(there)31 b(are)f(no)h(argumen)m(ts)f
+(or)h(only)f(empt)m(y)h(argumen)m(ts,)g(the)f(return)g(status)g(is)h
+(zero.)p eop end
+%%Page: 46 52
+TeXDict begin 46 51 bop 150 -116 a Fu(Chapter)30 b(4:)h(Shell)f
+(Builtin)h(Commands)2079 b(46)150 299 y Ft(exec)870 430
+y(exec)47 b([-cl])f([-a)h Fj(name)p Ft(])f([)p Fj(command)g
+Ft([)p Fj(arguments)p Ft(]])630 562 y Fu(If)36 b Fr(command)k
+Fu(is)c(supplied,)h(it)g(replaces)h(the)e(shell)h(without)f(creating)i
+(a)f(new)f(pro)s(cess.)630 671 y(If)k(the)h Ft(-l)e Fu(option)i(is)g
+(supplied,)h(the)e(shell)h(places)g(a)g(dash)f(at)h(the)f(b)s(eginning)
+g(of)h(the)630 781 y(zeroth)36 b(argumen)m(t)h(passed)e(to)h
+Fr(command)p Fu(.)57 b(This)35 b(is)h(what)f(the)h Ft(login)e
+Fu(program)i(do)s(es.)630 891 y(The)i Ft(-c)g Fu(option)g(causes)h
+Fr(command)j Fu(to)d(b)s(e)f(executed)h(with)f(an)g(empt)m(y)h(en)m
+(vironmen)m(t.)630 1000 y(If)c Ft(-a)g Fu(is)h(supplied,)f(the)h(shell)
+g(passes)f Fr(name)41 b Fu(as)36 b(the)f(zeroth)i(argumen)m(t)f(to)g
+Fr(command)p Fu(.)630 1110 y(If)c Fr(command)j Fu(cannot)e(b)s(e)f
+(executed)h(for)f(some)g(reason,)h(a)g(non-in)m(teractiv)m(e)i(shell)d
+(exits,)630 1219 y(unless)27 b(the)g Ft(execfail)e Fu(shell)i(option)h
+(is)f(enabled.)40 b(In)27 b(that)g(case,)j(it)d(returns)f(failure.)40
+b(An)630 1329 y(in)m(teractiv)m(e)35 b(shell)d(returns)f(failure)h(if)g
+(the)g(\014le)g(cannot)h(b)s(e)e(executed.)47 b(A)32
+b(subshell)f(exits)630 1439 y(unconditionally)j(if)g
+Ft(exec)f Fu(fails.)52 b(If)33 b(no)h Fr(command)j Fu(is)d(sp)s
+(eci\014ed,)h(redirections)f(ma)m(y)h(b)s(e)630 1548
+y(used)30 b(to)i(a\013ect)g(the)f(curren)m(t)g(shell)g(en)m(vironmen)m
+(t.)43 b(If)30 b(there)i(are)f(no)g(redirection)g(errors,)630
+1658 y(the)g(return)e(status)i(is)f(zero;)h(otherwise)g(the)g(return)e
+(status)i(is)f(non-zero.)150 1811 y Ft(exit)870 1943
+y(exit)47 b([)p Fj(n)p Ft(])630 2074 y Fu(Exit)30 b(the)g(shell,)h
+(returning)d(a)j(status)f(of)g Fr(n)f Fu(to)h(the)g(shell's)g(paren)m
+(t.)41 b(If)30 b Fr(n)f Fu(is)h(omitted,)h(the)630 2184
+y(exit)c(status)g(is)g(that)g(of)g(the)g(last)g(command)f(executed.)41
+b(An)m(y)26 b(trap)h(on)f Ft(EXIT)f Fu(is)i(executed)630
+2293 y(b)s(efore)j(the)h(shell)f(terminates.)150 2447
+y Ft(export)870 2578 y(export)46 b([-fn])g([-p])h([)p
+Fj(name)p Ft([=)p Fj(value)p Ft(]])630 2710 y Fu(Mark)40
+b(eac)m(h)h Fr(name)k Fu(to)40 b(b)s(e)f(passed)g(to)i(c)m(hild)f(pro)s
+(cesses)f(in)g(the)h(en)m(vironmen)m(t.)70 b(If)39 b(the)630
+2819 y Ft(-f)33 b Fu(option)h(is)g(supplied,)f(the)h
+Fr(name)5 b Fu(s)33 b(refer)g(to)i(shell)e(functions;)i(otherwise)f
+(the)g(names)630 2929 y(refer)c(to)h(shell)g(v)-5 b(ariables.)41
+b(The)30 b Ft(-n)f Fu(option)i(means)f(to)h(no)f(longer)h(mark)f(eac)m
+(h)i Fr(name)j Fu(for)630 3039 y(exp)s(ort.)52 b(If)33
+b(no)h Fr(names)k Fu(are)c(supplied,)g(or)g(if)g(the)g
+Ft(-p)g Fu(option)g(is)g(giv)m(en,)j(a)d(list)h(of)f(names)630
+3148 y(of)d(all)h(exp)s(orted)e(v)-5 b(ariables)31 b(is)g(displa)m(y)m
+(ed.)43 b(The)30 b Ft(-p)g Fu(option)i(displa)m(ys)e(output)h(in)f(a)h
+(form)630 3258 y(that)25 b(ma)m(y)g(b)s(e)f(reused)g(as)h(input.)38
+b(If)24 b(a)h(v)-5 b(ariable)25 b(name)g(is)g(follo)m(w)m(ed)h(b)m(y)e
+(=)p Fr(v)-5 b(alue)p Fu(,)27 b(the)d(v)-5 b(alue)630
+3367 y(of)31 b(the)f(v)-5 b(ariable)31 b(is)g(set)g(to)g
+Fr(v)-5 b(alue)p Fu(.)630 3499 y(The)29 b(return)e(status)j(is)f(zero)h
+(unless)e(an)h(in)m(v)-5 b(alid)29 b(option)h(is)f(supplied,)f(one)i
+(of)f(the)g(names)630 3608 y(is)k(not)g(a)h(v)-5 b(alid)33
+b(shell)h(v)-5 b(ariable)33 b(name,)i(or)e Ft(-f)f Fu(is)h(supplied)f
+(with)h(a)g(name)g(that)h(is)f(not)h(a)630 3718 y(shell)d(function.)150
+3871 y Ft(getopts)870 4003 y(getopts)46 b Fj(optstring)f(name)i
+Ft([)p Fj(arg)f Ft(...])630 4134 y(getopts)28 b Fu(is)i(used)g(b)m(y)g
+(shell)g(scripts)g(to)g(parse)g(p)s(ositional)h(parameters.)41
+b Fr(optstring)d Fu(con-)630 4244 y(tains)k(the)g(option)f(c)m
+(haracters)i(to)g(b)s(e)d(recognized;)49 b(if)42 b(a)f(c)m(haracter)j
+(is)d(follo)m(w)m(ed)i(b)m(y)f(a)630 4354 y(colon,)33
+b(the)f(option)g(is)g(exp)s(ected)g(to)h(ha)m(v)m(e)g(an)e(argumen)m
+(t,)i(whic)m(h)f(should)e(b)s(e)h(separated)630 4463
+y(from)40 b(it)g(b)m(y)g(whitespace.)70 b(The)40 b(colon)h(\(`)p
+Ft(:)p Fu('\))g(and)e(question)h(mark)g(\(`)p Ft(?)p
+Fu('\))h(ma)m(y)f(not)h(b)s(e)630 4573 y(used)d(as)g(option)h(c)m
+(haracters.)67 b(Eac)m(h)39 b(time)g(it)g(is)f(in)m(v)m(ok)m(ed,)k
+Ft(getopts)37 b Fu(places)i(the)g(next)630 4682 y(option)29
+b(in)f(the)h(shell)g(v)-5 b(ariable)30 b Fr(name)p Fu(,)f(initializing)
+i Fr(name)j Fu(if)28 b(it)h(do)s(es)g(not)g(exist,)h(and)e(the)630
+4792 y(index)33 b(of)g(the)h(next)f(argumen)m(t)h(to)g(b)s(e)e(pro)s
+(cessed)h(in)m(to)h(the)g(v)-5 b(ariable)34 b Ft(OPTIND)p
+Fu(.)48 b Ft(OPTIND)630 4902 y Fu(is)41 b(initialized)i(to)f(1)f(eac)m
+(h)h(time)g(the)f(shell)g(or)g(a)g(shell)g(script)g(is)g(in)m(v)m(ok)m
+(ed.)74 b(When)41 b(an)630 5011 y(option)36 b(requires)e(an)h(argumen)m
+(t,)i Ft(getopts)c Fu(places)j(that)g(argumen)m(t)g(in)m(to)g(the)f(v)
+-5 b(ariable)630 5121 y Ft(OPTARG)p Fu(.)55 b(The)35
+b(shell)g(do)s(es)h(not)g(reset)g Ft(OPTIND)e Fu(automatically;)41
+b(it)36 b(m)m(ust)f(b)s(e)g(man)m(ually)630 5230 y(reset)i(b)s(et)m(w)m
+(een)g(m)m(ultiple)h(calls)f(to)g Ft(getopts)e Fu(within)h(the)h(same)g
+(shell)f(in)m(v)m(o)s(cation)j(if)e(a)630 5340 y(new)30
+b(set)h(of)f(parameters)h(is)f(to)i(b)s(e)d(used.)p eop
+end
+%%Page: 47 53
+TeXDict begin 47 52 bop 150 -116 a Fu(Chapter)30 b(4:)41
+b(Shell)30 b(Builtin)h(Commands)2069 b(47)630 299 y(When)41
+b(the)h(end)e(of)i(options)g(is)f(encoun)m(tered,)k Ft(getopts)39
+b Fu(exits)j(with)f(a)h(return)e(v)-5 b(alue)630 408
+y(greater)32 b(than)e(zero.)41 b Ft(OPTIND)29 b Fu(is)h(set)h(to)g(the)
+g(index)f(of)g(the)h(\014rst)f(non-option)g(argumen)m(t,)630
+518 y(and)g Fr(name)35 b Fu(is)c(set)g(to)g(`)p Ft(?)p
+Fu('.)630 655 y Ft(getopts)c Fu(normally)j(parses)e(the)i(p)s
+(ositional)g(parameters,)g(but)e(if)i(more)f(argumen)m(ts)h(are)630
+765 y(supplied)f(as)i Fr(arg)38 b Fu(v)-5 b(alues,)31
+b Ft(getopts)e Fu(parses)h(those)h(instead.)630 902 y
+Ft(getopts)h Fu(can)h(rep)s(ort)g(errors)g(in)h(t)m(w)m(o)h(w)m(a)m
+(ys.)51 b(If)33 b(the)h(\014rst)e(c)m(haracter)k(of)d
+Fr(optstring)42 b Fu(is)34 b(a)630 1011 y(colon,)g Fr(silen)m(t)h
+Fu(error)d(rep)s(orting)f(is)i(used.)45 b(In)31 b(normal)h(op)s
+(eration,)h(diagnostic)h(messages)630 1121 y(are)c(prin)m(ted)e(when)g
+(in)m(v)-5 b(alid)30 b(options)g(or)f(missing)g(option)g(argumen)m(ts)h
+(are)f(encoun)m(tered.)630 1230 y(If)34 b(the)g(v)-5
+b(ariable)35 b Ft(OPTERR)d Fu(is)i(set)h(to)f(0,)i(no)e(error)g
+(messages)h(will)f(b)s(e)f(displa)m(y)m(ed,)j(ev)m(en)f(if)630
+1340 y(the)c(\014rst)e(c)m(haracter)j(of)f Ft(optstring)d
+Fu(is)i(not)h(a)f(colon.)630 1477 y(If)39 b(an)h(in)m(v)-5
+b(alid)41 b(option)f(is)g(seen,)i Ft(getopts)c Fu(places)j(`)p
+Ft(?)p Fu(')f(in)m(to)h Fr(name)k Fu(and,)d(if)e(not)g(silen)m(t,)630
+1587 y(prin)m(ts)f(an)h(error)f(message)h(and)f(unsets)g
+Ft(OPTARG)p Fu(.)67 b(If)39 b Ft(getopts)f Fu(is)i(silen)m(t,)j(the)c
+(option)630 1696 y(c)m(haracter)32 b(found)d(is)h(placed)h(in)f
+Ft(OPTARG)f Fu(and)h(no)g(diagnostic)i(message)f(is)g(prin)m(ted.)630
+1833 y(If)c(a)g(required)f(argumen)m(t)i(is)f(not)g(found,)g(and)f
+Ft(getopts)f Fu(is)i(not)h(silen)m(t,)h(a)e(question)g(mark)630
+1943 y(\(`)p Ft(?)p Fu('\))h(is)g(placed)g(in)f Fr(name)p
+Fu(,)h Ft(OPTARG)e Fu(is)h(unset,)h(and)f(a)g(diagnostic)i(message)g
+(is)e(prin)m(ted.)39 b(If)630 2052 y Ft(getopts)28 b
+Fu(is)h(silen)m(t,)i(then)e(a)h(colon)h(\(`)p Ft(:)p
+Fu('\))f(is)g(placed)g(in)f Fr(name)35 b Fu(and)29 b
+Ft(OPTARG)f Fu(is)h(set)h(to)h(the)630 2162 y(option)g(c)m(haracter)h
+(found.)150 2326 y Ft(hash)870 2463 y(hash)47 b([-r])f([-p)h
+Fj(filename)p Ft(])e([-dt])i([)p Fj(name)p Ft(])630 2600
+y Fu(Eac)m(h)32 b(time)g Ft(hash)e Fu(is)h(in)m(v)m(ok)m(ed,)j(it)d
+(remem)m(b)s(ers)g(the)g(full)g(pathnames)g(of)h(the)f(commands)630
+2710 y(sp)s(eci\014ed)i(as)i Fr(name)k Fu(argumen)m(ts,)c(so)g(they)f
+(need)g(not)g(b)s(e)f(searc)m(hed)i(for)f(on)g(subsequen)m(t)630
+2819 y(in)m(v)m(o)s(cations.)79 b(The)41 b(commands)h(are)h(found)e(b)m
+(y)h(searc)m(hing)i(through)d(the)i(directories)630 2929
+y(listed)37 b(in)g Ft($PATH)p Fu(.)58 b(An)m(y)37 b(previously-remem)m
+(b)s(ered)f(pathname)h(is)g(discarded.)59 b(The)37 b
+Ft(-p)630 3039 y Fu(option)d(inhibits)f(the)h(path)g(searc)m(h,)h(and)e
+Fr(\014lename)39 b Fu(is)34 b(used)f(as)h(the)f(lo)s(cation)j(of)e
+Fr(name)p Fu(.)630 3148 y(The)42 b Ft(-r)g Fu(option)h(causes)f(the)h
+(shell)g(to)g(forget)g(all)h(remem)m(b)s(ered)d(lo)s(cations.)79
+b(The)42 b Ft(-d)630 3258 y Fu(option)31 b(causes)g(the)f(shell)h(to)g
+(forget)h(the)f(remem)m(b)s(ered)e(lo)s(cation)j(of)f(eac)m(h)h
+Fr(name)p Fu(.)41 b(If)30 b(the)630 3367 y Ft(-t)39 b
+Fu(option)h(is)g(supplied,)g(the)g(full)f(pathname)h(to)g(whic)m(h)f
+(eac)m(h)i Fr(name)k Fu(corresp)s(onds)38 b(is)630 3477
+y(prin)m(ted.)i(If)28 b(m)m(ultiple)h Fr(name)34 b Fu(argumen)m(ts)29
+b(are)g(supplied)f(with)g Ft(-t)p Fu(,)h(the)g Fr(name)34
+b Fu(is)28 b(prin)m(ted)630 3587 y(b)s(efore)h(the)i(hashed)e(full)g
+(pathname.)41 b(The)29 b Ft(-l)g Fu(option)i(causes)f(output)f(to)i(b)s
+(e)e(displa)m(y)m(ed)630 3696 y(in)23 b(a)h(format)g(that)g(ma)m(y)g(b)
+s(e)f(reused)f(as)i(input.)37 b(If)23 b(no)h(argumen)m(ts)f(are)h(giv)m
+(en,)i(or)e(if)f(only)h Ft(-l)630 3806 y Fu(is)35 b(supplied,)f
+(information)h(ab)s(out)g(remem)m(b)s(ered)f(commands)g(is)h(prin)m
+(ted.)53 b(The)34 b(return)630 3915 y(status)d(is)f(zero)h(unless)f(a)h
+Fr(name)k Fu(is)c(not)f(found)f(or)i(an)f(in)m(v)-5 b(alid)31
+b(option)g(is)f(supplied.)150 4080 y Ft(pwd)870 4217
+y(pwd)47 b([-LP])630 4354 y Fu(Prin)m(t)29 b(the)g(absolute)h(pathname)
+e(of)h(the)h(curren)m(t)e(w)m(orking)h(directory)-8 b(.)42
+b(If)28 b(the)h Ft(-P)f Fu(option)630 4463 y(is)39 b(supplied,)h(the)f
+(pathname)g(prin)m(ted)g(will)g(not)h(con)m(tain)g(sym)m(b)s(olic)f
+(links.)67 b(If)38 b(the)i Ft(-L)630 4573 y Fu(option)k(is)g(supplied,)
+i(the)e(pathname)f(prin)m(ted)h(ma)m(y)g(con)m(tain)h(sym)m(b)s(olic)f
+(links.)80 b(The)630 4682 y(return)26 b(status)h(is)h(zero)g(unless)e
+(an)h(error)g(is)g(encoun)m(tered)g(while)h(determining)f(the)g(name)
+630 4792 y(of)k(the)f(curren)m(t)g(directory)h(or)f(an)h(in)m(v)-5
+b(alid)31 b(option)g(is)f(supplied.)150 4956 y Ft(readonly)870
+5093 y(readonly)46 b([-aAf])g([-p])g([)p Fj(name)p Ft([=)p
+Fj(value)p Ft(]])e(...)630 5230 y Fu(Mark)33 b(eac)m(h)h
+Fr(name)39 b Fu(as)33 b(readonly)-8 b(.)49 b(The)32 b(v)-5
+b(alues)34 b(of)f(these)g(names)g(ma)m(y)h(not)f(b)s(e)f(c)m(hanged)630
+5340 y(b)m(y)38 b(subsequen)m(t)g(assignmen)m(t.)65 b(If)38
+b(the)h Ft(-f)f Fu(option)g(is)h(supplied,)g(eac)m(h)h
+Fr(name)j Fu(refers)38 b(to)p eop end
+%%Page: 48 54
+TeXDict begin 48 53 bop 150 -116 a Fu(Chapter)30 b(4:)41
+b(Shell)30 b(Builtin)h(Commands)2069 b(48)630 299 y(a)37
+b(shell)g(function.)59 b(The)36 b Ft(-a)g Fu(option)h(means)f(eac)m(h)i
+Fr(name)k Fu(refers)36 b(to)h(an)f(indexed)g(arra)m(y)630
+408 y(v)-5 b(ariable;)28 b(the)f Ft(-A)e Fu(option)h(means)g(eac)m(h)h
+Fr(name)k Fu(refers)26 b(to)g(an)g(asso)s(ciativ)m(e)i(arra)m(y)f(v)-5
+b(ariable.)630 518 y(If)35 b(b)s(oth)g(options)h(are)h(supplied,)f
+Ft(-A)f Fu(tak)m(es)i(precedence.)58 b(If)35 b(no)h Fr(name)k
+Fu(argumen)m(ts)d(are)630 628 y(giv)m(en,)k(or)c(if)h(the)g
+Ft(-p)f Fu(option)h(is)f(supplied,)i(a)f(list)g(of)g(all)g(readonly)g
+(names)f(is)h(prin)m(ted.)630 737 y(The)32 b(other)g(options)g(ma)m(y)h
+(b)s(e)f(used)f(to)i(restrict)g(the)f(output)g(to)h(a)f(subset)g(of)g
+(the)g(set)h(of)630 847 y(readonly)c(names.)41 b(The)28
+b Ft(-p)h Fu(option)h(causes)g(output)e(to)j(b)s(e)d(displa)m(y)m(ed)i
+(in)f(a)h(format)f(that)630 956 y(ma)m(y)j(b)s(e)e(reused)g(as)i
+(input.)42 b(If)30 b(a)i(v)-5 b(ariable)31 b(name)h(is)f(follo)m(w)m
+(ed)h(b)m(y)f(=)p Fr(v)-5 b(alue)p Fu(,)32 b(the)f(v)-5
+b(alue)32 b(of)630 1066 y(the)i(v)-5 b(ariable)34 b(is)f(set)i(to)f
+Fr(v)-5 b(alue)p Fu(.)50 b(The)33 b(return)g(status)g(is)h(zero)g
+(unless)f(an)g(in)m(v)-5 b(alid)34 b(option)630 1176
+y(is)c(supplied,)f(one)h(of)g(the)g Fr(name)35 b Fu(argumen)m(ts)30
+b(is)g(not)g(a)g(v)-5 b(alid)31 b(shell)f(v)-5 b(ariable)30
+b(or)g(function)630 1285 y(name,)h(or)f(the)h Ft(-f)e
+Fu(option)i(is)g(supplied)e(with)h(a)h(name)f(that)h(is)f(not)h(a)g
+(shell)f(function.)150 1462 y Ft(return)870 1606 y(return)46
+b([)p Fj(n)p Ft(])630 1749 y Fu(Cause)37 b(a)g(shell)h(function)f(to)g
+(stop)h(executing)g(and)e(return)h(the)g(v)-5 b(alue)37
+b Fr(n)g Fu(to)h(its)f(caller.)630 1858 y(If)h Fr(n)h
+Fu(is)g(not)g(supplied,)h(the)f(return)e(v)-5 b(alue)40
+b(is)f(the)g(exit)g(status)g(of)g(the)g(last)h(command)630
+1968 y(executed)i(in)f(the)g(function.)72 b(If)41 b Ft(return)e
+Fu(is)i(executed)h(b)m(y)f(a)h(trap)f(handler,)i(the)e(last)630
+2078 y(command)d(used)f(to)i(determine)f(the)g(status)g(is)h(the)f
+(last)h(command)e(executed)i(b)s(efore)630 2187 y(the)27
+b(trap)g(handler.)39 b(If)26 b Ft(return)g Fu(is)h(executed)h(during)d
+(a)j Ft(DEBUG)d Fu(trap,)j(the)f(last)h(command)630 2297
+y(used)f(to)h(determine)g(the)f(status)h(is)g(the)f(last)i(command)e
+(executed)h(b)m(y)g(the)f(trap)h(handler)630 2406 y(b)s(efore)e
+Ft(return)f Fu(w)m(as)i(in)m(v)m(ok)m(ed.)41 b Ft(return)25
+b Fu(ma)m(y)i(also)g(b)s(e)f(used)g(to)h(terminate)h(execution)g(of)630
+2516 y(a)34 b(script)g(b)s(eing)g(executed)g(with)g(the)g
+Ft(.)g Fu(\()p Ft(source)p Fu(\))f(builtin,)h(returning)f(either)i
+Fr(n)e Fu(or)h(the)630 2626 y(exit)j(status)f(of)g(the)g(last)h
+(command)e(executed)i(within)e(the)h(script)g(as)g(the)g(exit)h(status)
+630 2735 y(of)i(the)g(script.)65 b(If)38 b Fr(n)g Fu(is)h(supplied,)h
+(the)f(return)e(v)-5 b(alue)39 b(is)g(its)g(least)h(signi\014can)m(t)g
+(8)f(bits.)630 2845 y(An)m(y)g(command)f(asso)s(ciated)j(with)d(the)h
+Ft(RETURN)e Fu(trap)i(is)g(executed)g(b)s(efore)g(execution)630
+2954 y(resumes)29 b(after)h(the)g(function)g(or)g(script.)40
+b(The)29 b(return)g(status)h(is)g(non-zero)g(if)g Ft(return)e
+Fu(is)630 3064 y(supplied)h(a)i(non-n)m(umeric)g(argumen)m(t)g(or)f(is)
+h(used)f(outside)h(a)g(function)f(and)g(not)h(during)630
+3173 y(the)g(execution)g(of)g(a)f(script)h(b)m(y)f Ft(.)g
+Fu(or)g Ft(source)p Fu(.)150 3351 y Ft(shift)870 3494
+y(shift)46 b([)p Fj(n)p Ft(])630 3637 y Fu(Shift)41 b(the)g(p)s
+(ositional)h(parameters)g(to)g(the)f(left)h(b)m(y)g Fr(n)p
+Fu(.)73 b(The)40 b(p)s(ositional)j(parameters)630 3747
+y(from)34 b Fr(n)p Ft(+)p Fu(1)39 b(.)22 b(.)h(.)45 b
+Ft($#)34 b Fu(are)g(renamed)g(to)h Ft($1)k Fu(.)22 b(.)g(.)46
+b Ft($#)p Fu(-)p Fr(n)p Fu(.)51 b(P)m(arameters)36 b(represen)m(ted)e
+(b)m(y)g(the)630 3856 y(n)m(um)m(b)s(ers)d Ft($#)i Fu(do)m(wn)f(to)i
+Ft($#)p Fu(-)p Fr(n)p Ft(+)p Fu(1)e(are)h(unset.)48 b
+Fr(n)32 b Fu(m)m(ust)h(b)s(e)f(a)h(non-negativ)m(e)i(n)m(um)m(b)s(er)d
+(less)630 3966 y(than)g(or)g(equal)h(to)g Ft($#)p Fu(.)46
+b(If)31 b Fr(n)h Fu(is)g(zero)h(or)f(greater)i(than)e
+Ft($#)p Fu(,)g(the)h(p)s(ositional)g(parameters)630 4075
+y(are)e(not)h(c)m(hanged.)43 b(If)31 b Fr(n)g Fu(is)g(not)g(supplied,)f
+(it)i(is)f(assumed)f(to)i(b)s(e)f(1.)43 b(The)31 b(return)f(status)630
+4185 y(is)g(zero)i(unless)d Fr(n)h Fu(is)g(greater)i(than)e
+Ft($#)g Fu(or)g(less)h(than)f(zero,)i(non-zero)e(otherwise.)150
+4362 y Ft(test)150 4472 y([)870 4615 y(test)47 b Fj(expr)630
+4758 y Fu(Ev)-5 b(aluate)43 b(a)f(conditional)h(expression)f
+Fr(expr)48 b Fu(and)41 b(return)g(a)h(status)g(of)g(0)g(\(true\))h(or)f
+(1)630 4868 y(\(false\).)g(Eac)m(h)31 b(op)s(erator)f(and)f(op)s(erand)
+g(m)m(ust)h(b)s(e)f(a)i(separate)g(argumen)m(t.)41 b(Expressions)630
+4977 y(are)26 b(comp)s(osed)f(of)g(the)h(primaries)f(describ)s(ed)f(b)s
+(elo)m(w)h(in)g(Section)h(6.4)h([Bash)e(Conditional)630
+5087 y(Expressions],)39 b(page)g(91.)64 b Ft(test)37
+b Fu(do)s(es)g(not)h(accept)i(an)m(y)e(options,)i(nor)e(do)s(es)f(it)h
+(accept)630 5197 y(and)30 b(ignore)h(an)f(argumen)m(t)h(of)f
+Ft(--)g Fu(as)h(signifying)f(the)h(end)f(of)g(options.)630
+5340 y(When)g(the)h Ft([)f Fu(form)g(is)g(used,)g(the)g(last)i(argumen)
+m(t)e(to)i(the)e(command)g(m)m(ust)h(b)s(e)e(a)i Ft(])p
+Fu(.)p eop end
+%%Page: 49 55
+TeXDict begin 49 54 bop 150 -116 a Fu(Chapter)30 b(4:)41
+b(Shell)30 b(Builtin)h(Commands)2069 b(49)630 299 y(Expressions)23
+b(ma)m(y)h(b)s(e)e(com)m(bined)i(using)f(the)h(follo)m(wing)h(op)s
+(erators,)g(listed)f(in)f(decreasing)630 408 y(order)30
+b(of)h(precedence.)43 b(The)30 b(ev)-5 b(aluation)33
+b(dep)s(ends)28 b(on)j(the)g(n)m(um)m(b)s(er)f(of)h(argumen)m(ts;)g
+(see)630 518 y(b)s(elo)m(w.)41 b(Op)s(erator)30 b(precedence)h(is)f
+(used)g(when)f(there)i(are)f(\014v)m(e)h(or)f(more)h(argumen)m(ts.)630
+673 y Ft(!)f Fj(expr)210 b Fu(T)-8 b(rue)30 b(if)g Fr(expr)37
+b Fu(is)30 b(false.)630 829 y Ft(\()g Fj(expr)f Ft(\))133
+b Fu(Returns)23 b(the)i(v)-5 b(alue)25 b(of)f Fr(expr)p
+Fu(.)38 b(This)24 b(ma)m(y)h(b)s(e)e(used)h(to)h(o)m(v)m(erride)g(the)g
+(normal)1110 938 y(precedence)31 b(of)f(op)s(erators.)630
+1093 y Fj(expr1)f Ft(-a)h Fj(expr2)1110 1203 y Fu(T)-8
+b(rue)30 b(if)g(b)s(oth)g Fr(expr1)37 b Fu(and)30 b Fr(expr2)38
+b Fu(are)30 b(true.)630 1358 y Fj(expr1)f Ft(-o)h Fj(expr2)1110
+1468 y Fu(T)-8 b(rue)30 b(if)g(either)h Fr(expr1)38 b
+Fu(or)30 b Fr(expr2)37 b Fu(is)31 b(true.)630 1623 y(The)37
+b Ft(test)f Fu(and)g Ft([)h Fu(builtins)g(ev)-5 b(aluate)39
+b(conditional)f(expressions)f(using)g(a)g(set)h(of)f(rules)630
+1733 y(based)30 b(on)g(the)h(n)m(um)m(b)s(er)e(of)h(argumen)m(ts.)630
+1888 y(0)h(argumen)m(ts)1110 1998 y(The)f(expression)g(is)g(false.)630
+2153 y(1)h(argumen)m(t)1110 2262 y(The)f(expression)g(is)g(true)h(if,)f
+(and)g(only)g(if,)h(the)g(argumen)m(t)f(is)h(not)f(n)m(ull.)630
+2418 y(2)h(argumen)m(ts)1110 2527 y(If)f(the)h(\014rst)f(argumen)m(t)h
+(is)g(`)p Ft(!)p Fu(',)g(the)g(expression)g(is)g(true)f(if)h(and)f
+(only)h(if)g(the)1110 2637 y(second)j(argumen)m(t)f(is)h(n)m(ull.)50
+b(If)33 b(the)h(\014rst)e(argumen)m(t)i(is)g(one)g(of)f(the)h(unary)
+1110 2746 y(conditional)42 b(op)s(erators)f(\(see)g(Section)h(6.4)f
+([Bash)g(Conditional)g(Expres-)1110 2856 y(sions],)34
+b(page)f(91\),)i(the)e(expression)f(is)h(true)g(if)g(the)g(unary)e
+(test)j(is)f(true.)47 b(If)1110 2966 y(the)33 b(\014rst)g(argumen)m(t)h
+(is)f(not)g(a)h(v)-5 b(alid)34 b(unary)e(op)s(erator,)i(the)g
+(expression)f(is)1110 3075 y(false.)630 3230 y(3)e(argumen)m(ts)1110
+3340 y(The)f(follo)m(wing)i(conditions)f(are)f(applied)h(in)f(the)g
+(order)g(listed.)1159 3472 y(1.)61 b(If)29 b(the)g(second)g(argumen)m
+(t)h(is)f(one)h(of)f(the)h(binary)e(conditional)j(op)s(era-)1290
+3582 y(tors)c(\(see)h(Section)g(6.4)g([Bash)g(Conditional)f
+(Expressions],)h(page)f(91\),)1290 3692 y(the)d(result)g(of)f(the)h
+(expression)g(is)g(the)f(result)h(of)g(the)g(binary)f(test)h(using)1290
+3801 y(the)35 b(\014rst)e(and)h(third)g(argumen)m(ts)h(as)f(op)s
+(erands.)52 b(The)34 b(`)p Ft(-a)p Fu(')g(and)g(`)p Ft(-o)p
+Fu(')1290 3911 y(op)s(erators)24 b(are)g(considered)g(binary)f(op)s
+(erators)h(when)f(there)h(are)h(three)1290 4020 y(argumen)m(ts.)1159
+4153 y(2.)61 b(If)41 b(the)h(\014rst)e(argumen)m(t)i(is)f(`)p
+Ft(!)p Fu(',)k(the)d(v)-5 b(alue)41 b(is)h(the)f(negation)i(of)f(the)
+1290 4262 y(t)m(w)m(o-argumen)m(t)33 b(test)e(using)f(the)g(second)h
+(and)e(third)h(argumen)m(ts.)1159 4395 y(3.)61 b(If)35
+b(the)h(\014rst)e(argumen)m(t)i(is)g(exactly)h(`)p Ft(\()p
+Fu(')f(and)f(the)g(third)g(argumen)m(t)h(is)1290 4504
+y(exactly)i(`)p Ft(\))p Fu(',)g(the)f(result)f(is)h(the)f(one-argumen)m
+(t)i(test)f(of)f(the)h(second)1290 4614 y(argumen)m(t.)1159
+4746 y(4.)61 b(Otherwise,)30 b(the)h(expression)f(is)g(false.)630
+4902 y(4)h(argumen)m(ts)1110 5011 y(If)h(the)i(\014rst)e(argumen)m(t)h
+(is)g(`)p Ft(!)p Fu(',)h(the)f(result)g(is)g(the)g(negation)h(of)f(the)
+g(three-)1110 5121 y(argumen)m(t)h(expression)f(comp)s(osed)h(of)f(the)
+h(remaining)g(argumen)m(ts.)50 b(Oth-)1110 5230 y(erwise,)34
+b(the)f(expression)g(is)g(parsed)g(and)f(ev)-5 b(aluated)34
+b(according)h(to)e(prece-)1110 5340 y(dence)e(using)e(the)i(rules)f
+(listed)h(ab)s(o)m(v)m(e.)p eop end
+%%Page: 50 56
+TeXDict begin 50 55 bop 150 -116 a Fu(Chapter)30 b(4:)41
+b(Shell)30 b(Builtin)h(Commands)2069 b(50)630 299 y(5)31
+b(or)f(more)h(argumen)m(ts)1110 408 y(The)43 b(expression)f(is)i
+(parsed)e(and)g(ev)-5 b(aluated)45 b(according)f(to)f(precedence)1110
+518 y(using)30 b(the)g(rules)g(listed)h(ab)s(o)m(v)m(e.)630
+690 y(When)40 b(used)f(with)g Ft(test)g Fu(or)h(`)p Ft([)p
+Fu(',)j(the)d(`)p Ft(<)p Fu(')g(and)f(`)p Ft(>)p Fu(')h(op)s(erators)g
+(sort)g(lexicographically)630 800 y(using)30 b(ASCI)s(I)f(ordering.)150
+972 y Ft(times)870 1113 y(times)630 1254 y Fu(Prin)m(t)37
+b(out)h(the)g(user)e(and)h(system)g(times)h(used)f(b)m(y)g(the)h(shell)
+f(and)g(its)h(c)m(hildren.)61 b(The)630 1363 y(return)29
+b(status)i(is)f(zero.)150 1536 y Ft(trap)870 1677 y(trap)47
+b([-lp])f([)p Fj(arg)p Ft(])g([)p Fj(sigspec)g Ft(...)o(])630
+1817 y Fu(The)d(commands)f(in)h Fr(arg)51 b Fu(are)44
+b(to)g(b)s(e)e(read)h(and)g(executed)h(when)e(the)h(shell)g(receiv)m
+(es)630 1927 y(signal)36 b Fr(sigsp)s(ec)p Fu(.)57 b(If)35
+b Fr(arg)44 b Fu(is)36 b(absen)m(t)g(\(and)f(there)h(is)g(a)f(single)i
+Fr(sigsp)s(ec)6 b Fu(\))35 b(or)h(equal)g(to)h(`)p Ft(-)p
+Fu(',)630 2037 y(eac)m(h)k(sp)s(eci\014ed)e(signal's)h(disp)s(osition)g
+(is)f(reset)i(to)f(the)g(v)-5 b(alue)40 b(it)g(had)f(when)g(the)h
+(shell)630 2146 y(w)m(as)33 b(started.)47 b(If)32 b Fr(arg)41
+b Fu(is)32 b(the)h(n)m(ull)f(string,)i(then)e(the)g(signal)i(sp)s
+(eci\014ed)d(b)m(y)i(eac)m(h)g Fr(sigsp)s(ec)630 2256
+y Fu(is)g(ignored)h(b)m(y)f(the)g(shell)h(and)e(commands)h(it)h(in)m(v)
+m(ok)m(es.)51 b(If)33 b Fr(arg)41 b Fu(is)33 b(not)h(presen)m(t)f(and)g
+Ft(-p)630 2365 y Fu(has)g(b)s(een)g(supplied,)f(the)i(shell)f(displa)m
+(ys)h(the)f(trap)g(commands)g(asso)s(ciated)i(with)e(eac)m(h)630
+2475 y Fr(sigsp)s(ec)p Fu(.)47 b(If)31 b(no)i(argumen)m(ts)f(are)h
+(supplied,)e(or)i(only)f Ft(-p)g Fu(is)g(giv)m(en,)i
+Ft(trap)d Fu(prin)m(ts)h(the)g(list)630 2585 y(of)c(commands)f(asso)s
+(ciated)i(with)f(eac)m(h)h(signal)f(n)m(um)m(b)s(er)e(in)i(a)g(form)f
+(that)h(ma)m(y)h(b)s(e)e(reused)630 2694 y(as)f(shell)h(input.)38
+b(The)26 b Ft(-l)f Fu(option)i(causes)f(the)g(shell)h(to)g(prin)m(t)e
+(a)i(list)f(of)h(signal)g(names)f(and)630 2804 y(their)33
+b(corresp)s(onding)f(n)m(um)m(b)s(ers.)47 b(Eac)m(h)34
+b Fr(sigsp)s(ec)39 b Fu(is)33 b(either)g(a)h(signal)g(name)f(or)g(a)g
+(signal)630 2913 y(n)m(um)m(b)s(er.)39 b(Signal)31 b(names)f(are)h
+(case)h(insensitiv)m(e)f(and)f(the)g Ft(SIG)g Fu(pre\014x)f(is)i
+(optional.)630 3054 y(If)k(a)g Fr(sigsp)s(ec)41 b Fu(is)35
+b Ft(0)g Fu(or)g Ft(EXIT)p Fu(,)g Fr(arg)43 b Fu(is)35
+b(executed)h(when)e(the)h(shell)h(exits.)55 b(If)35 b(a)g
+Fr(sigsp)s(ec)41 b Fu(is)630 3164 y Ft(DEBUG)p Fu(,)32
+b(the)g(command)g Fr(arg)40 b Fu(is)33 b(executed)g(b)s(efore)f(ev)m
+(ery)h(simple)f(command,)h Ft(for)e Fu(com-)630 3273
+y(mand,)d Ft(case)g Fu(command,)h Ft(select)e Fu(command,)i(ev)m(ery)h
+(arithmetic)g Ft(for)d Fu(command,)j(and)630 3383 y(b)s(efore)22
+b(the)g(\014rst)f(command)h(executes)i(in)e(a)g(shell)h(function.)37
+b(Refer)22 b(to)h(the)g(description)f(of)630 3493 y(the)i
+Ft(extdebug)d Fu(option)j(to)h(the)f Ft(shopt)e Fu(builtin)h(\(see)i
+(Section)f(4.3.2)i([The)d(Shopt)g(Builtin],)630 3602
+y(page)33 b(66\))g(for)f(details)h(of)f(its)h(e\013ect)g(on)f(the)g
+Ft(DEBUG)f Fu(trap.)46 b(If)31 b(a)i Fr(sigsp)s(ec)38
+b Fu(is)32 b Ft(RETURN)p Fu(,)f(the)630 3712 y(command)h
+Fr(arg)41 b Fu(is)33 b(executed)g(eac)m(h)h(time)f(a)g(shell)g
+(function)g(or)f(a)h(script)g(executed)g(with)630 3821
+y(the)e Ft(.)f Fu(or)g Ft(source)f Fu(builtins)g(\014nishes)h
+(executing.)630 3962 y(If)20 b(a)i Fr(sigsp)s(ec)27 b
+Fu(is)21 b Ft(ERR)p Fu(,)h(the)f(command)g Fr(arg)29
+b Fu(is)21 b(executed)h(whenev)m(er)e(a)i(pip)s(eline)e(\(whic)m(h)h
+(ma)m(y)630 4072 y(consist)35 b(of)g(a)f(single)h(simple)g(command\),)h
+(a)e(list,)j(or)d(a)h(comp)s(ound)e(command)h(returns)630
+4181 y(a)41 b(non-zero)g(exit)h(status,)h(sub)5 b(ject)41
+b(to)g(the)g(follo)m(wing)h(conditions.)72 b(The)40 b
+Ft(ERR)f Fu(trap)i(is)630 4291 y(not)c(executed)h(if)f(the)h(failed)f
+(command)g(is)g(part)g(of)h(the)f(command)g(list)h(immediately)630
+4401 y(follo)m(wing)30 b(an)e Ft(until)f Fu(or)i Ft(while)e
+Fu(k)m(eyw)m(ord,)i(part)g(of)f(the)h(test)g(follo)m(wing)h(the)f
+Ft(if)f Fu(or)g Ft(elif)630 4510 y Fu(reserv)m(ed)45
+b(w)m(ords,)j(part)c(of)h(a)g(command)g(executed)g(in)g(a)g
+Ft(&&)f Fu(or)h Ft(||)f Fu(list)h(except)h(the)630 4620
+y(command)28 b(follo)m(wing)j(the)d(\014nal)h Ft(&&)f
+Fu(or)g Ft(||)p Fu(,)h(an)m(y)g(command)f(in)h(a)g(pip)s(eline)f(but)g
+(the)h(last,)630 4729 y(or)d(if)g(the)f(command's)h(return)f(status)h
+(is)g(b)s(eing)f(in)m(v)m(erted)i(using)e Ft(!)p Fu(.)39
+b(These)25 b(are)i(the)f(same)630 4839 y(conditions)31
+b(ob)s(ey)m(ed)f(b)m(y)h(the)f Ft(errexit)f Fu(\()p Ft(-e)p
+Fu(\))h(option.)630 4980 y(Signals)37 b(ignored)f(up)s(on)f(en)m(try)i
+(to)g(the)f(shell)h(cannot)g(b)s(e)f(trapp)s(ed)f(or)h(reset.)59
+b(T)-8 b(rapp)s(ed)630 5089 y(signals)28 b(that)f(are)h(not)f(b)s(eing)
+g(ignored)g(are)g(reset)h(to)g(their)f(original)h(v)-5
+b(alues)28 b(in)e(a)i(subshell)630 5199 y(or)i(subshell)g(en)m
+(vironmen)m(t)h(when)e(one)i(is)f(created.)630 5340 y(The)g(return)f
+(status)i(is)f(zero)h(unless)f(a)h Fr(sigsp)s(ec)36 b
+Fu(do)s(es)30 b(not)h(sp)s(ecify)f(a)g(v)-5 b(alid)31
+b(signal.)p eop end
+%%Page: 51 57
+TeXDict begin 51 56 bop 150 -116 a Fu(Chapter)30 b(4:)41
+b(Shell)30 b(Builtin)h(Commands)2069 b(51)150 299 y Ft(umask)870
+434 y(umask)46 b([-p])h([-S])g([)p Fj(mode)p Ft(])630
+570 y Fu(Set)30 b(the)f(shell)h(pro)s(cess's)f(\014le)h(creation)g
+(mask)g(to)g Fr(mo)s(de)p Fu(.)40 b(If)29 b Fr(mo)s(de)34
+b Fu(b)s(egins)29 b(with)g(a)h(digit,)630 679 y(it)e(is)f(in)m
+(terpreted)g(as)g(an)g(o)s(ctal)i(n)m(um)m(b)s(er;)e(if)g(not,)h(it)g
+(is)f(in)m(terpreted)g(as)g(a)h(sym)m(b)s(olic)f(mo)s(de)630
+789 y(mask)i(similar)g(to)g(that)h(accepted)g(b)m(y)f(the)g
+Ft(chmod)e Fu(command.)40 b(If)28 b Fr(mo)s(de)34 b Fu(is)28
+b(omitted,)j(the)630 899 y(curren)m(t)39 b(v)-5 b(alue)40
+b(of)f(the)g(mask)g(is)h(prin)m(ted.)66 b(If)39 b(the)g
+Ft(-S)g Fu(option)g(is)h(supplied)d(without)j(a)630 1008
+y Fr(mo)s(de)d Fu(argumen)m(t,)d(the)e(mask)g(is)h(prin)m(ted)f(in)g(a)
+g(sym)m(b)s(olic)h(format.)47 b(If)32 b(the)g Ft(-p)g
+Fu(option)h(is)630 1118 y(supplied,)f(and)f Fr(mo)s(de)37
+b Fu(is)32 b(omitted,)i(the)f(output)f(is)g(in)g(a)g(form)g(that)h(ma)m
+(y)g(b)s(e)e(reused)h(as)630 1227 y(input.)62 b(The)38
+b(return)f(status)h(is)g(zero)g(if)g(the)g(mo)s(de)g(is)g(successfully)
+g(c)m(hanged)g(or)g(if)g(no)630 1337 y Fr(mo)s(de)d Fu(argumen)m(t)c
+(is)f(supplied,)g(and)f(non-zero)i(otherwise.)630 1473
+y(Note)38 b(that)e(when)g(the)g(mo)s(de)g(is)g(in)m(terpreted)h(as)f
+(an)g(o)s(ctal)i(n)m(um)m(b)s(er,)e(eac)m(h)i(n)m(um)m(b)s(er)d(of)630
+1582 y(the)f(umask)g(is)h(subtracted)f(from)f Ft(7)p
+Fu(.)53 b(Th)m(us,)34 b(a)h(umask)e(of)i Ft(022)e Fu(results)h(in)g(p)s
+(ermissions)630 1692 y(of)d Ft(755)p Fu(.)150 1853 y
+Ft(unset)870 1989 y(unset)46 b([-fnv])g([)p Fj(name)p
+Ft(])630 2124 y Fu(Remo)m(v)m(e)36 b(eac)m(h)f(v)-5 b(ariable)35
+b(or)f(function)f Fr(name)p Fu(.)52 b(If)33 b(the)i Ft(-v)e
+Fu(option)h(is)g(giv)m(en,)j(eac)m(h)e Fr(name)630 2234
+y Fu(refers)27 b(to)h(a)g(shell)f(v)-5 b(ariable)28 b(and)f(that)h(v)-5
+b(ariable)28 b(is)f(remo)m(v)m(ed.)41 b(If)27 b(the)g
+Ft(-f)g Fu(option)g(is)h(giv)m(en,)630 2343 y(the)37
+b Fr(name)5 b Fu(s)37 b(refer)f(to)i(shell)f(functions,)h(and)e(the)h
+(function)g(de\014nition)f(is)h(remo)m(v)m(ed.)61 b(If)630
+2453 y(the)34 b Ft(-n)e Fu(option)i(is)g(supplied,)f(and)g
+Fr(name)38 b Fu(is)c(a)f(v)-5 b(ariable)34 b(with)g(the)f
+Fr(nameref)51 b Fu(attribute,)630 2563 y Fr(name)42 b
+Fu(will)37 b(b)s(e)f(unset)g(rather)g(than)h(the)g(v)-5
+b(ariable)37 b(it)g(references.)60 b Ft(-n)36 b Fu(has)g(no)h(e\013ect)
+h(if)630 2672 y(the)h Ft(-f)g Fu(option)g(is)h(supplied.)65
+b(If)39 b(no)g(options)h(are)f(supplied,)h(eac)m(h)h
+Fr(name)j Fu(refers)39 b(to)h(a)630 2782 y(v)-5 b(ariable;)45
+b(if)39 b(there)g(is)g(no)g(v)-5 b(ariable)40 b(b)m(y)f(that)h(name,)h
+(a)f(function)f(with)g(that)g(name,)j(if)630 2891 y(an)m(y)-8
+b(,)34 b(is)e(unset.)46 b(Readonly)33 b(v)-5 b(ariables)33
+b(and)f(functions)g(ma)m(y)h(not)f(b)s(e)g(unset.)46
+b(Some)33 b(shell)630 3001 y(v)-5 b(ariables)29 b(lose)h(their)e(sp)s
+(ecial)h(b)s(eha)m(vior)g(if)f(they)h(are)g(unset;)g(suc)m(h)f(b)s(eha)
+m(vior)h(is)g(noted)f(in)630 3110 y(the)35 b(description)h(of)f(the)g
+(individual)g(v)-5 b(ariables.)56 b(The)34 b(return)g(status)i(is)f
+(zero)h(unless)f(a)630 3220 y Fr(name)h Fu(is)30 b(readonly)-8
+b(.)150 3464 y Fs(4.2)68 b(Bash)45 b(Builtin)g(Commands)150
+3623 y Fu(This)c(section)h(describ)s(es)f(builtin)f(commands)h(whic)m
+(h)g(are)h(unique)e(to)j(or)e(ha)m(v)m(e)h(b)s(een)f(extended)g(in)150
+3733 y(Bash.)g(Some)30 b(of)h(these)g(commands)f(are)g(sp)s(eci\014ed)g
+(in)g(the)h Fm(posix)e Fu(standard.)150 3895 y Ft(alias)870
+4031 y(alias)46 b([-p])h([)p Fj(name)p Ft([=)p Fj(value)p
+Ft(])d(...)o(])630 4166 y Fu(Without)26 b(argumen)m(ts)f(or)g(with)f
+(the)h Ft(-p)g Fu(option,)h Ft(alias)e Fu(prin)m(ts)g(the)h(list)h(of)f
+(aliases)h(on)f(the)630 4276 y(standard)g(output)g(in)g(a)h(form)f
+(that)h(allo)m(ws)h(them)e(to)h(b)s(e)f(reused)g(as)g(input.)39
+b(If)25 b(argumen)m(ts)630 4385 y(are)j(supplied,)e(an)i(alias)g(is)f
+(de\014ned)f(for)h(eac)m(h)h Fr(name)33 b Fu(whose)27
+b Fr(v)-5 b(alue)33 b Fu(is)27 b(giv)m(en.)41 b(If)26
+b(no)h Fr(v)-5 b(alue)630 4495 y Fu(is)37 b(giv)m(en,)j(the)d(name)g
+(and)g(v)-5 b(alue)37 b(of)h(the)f(alias)h(is)f(prin)m(ted.)61
+b(Aliases)38 b(are)f(describ)s(ed)f(in)630 4605 y(Section)31
+b(6.6)h([Aliases],)g(page)f(94.)150 4766 y Ft(bind)870
+4902 y(bind)47 b([-m)g Fj(keymap)p Ft(])e([-lpsvPSVX])870
+5011 y(bind)i([-m)g Fj(keymap)p Ft(])e([-q)i Fj(function)p
+Ft(])f([-u)g Fj(function)p Ft(])g([-r)h Fj(keyseq)p Ft(])870
+5121 y(bind)g([-m)g Fj(keymap)p Ft(])e(-f)j Fj(filename)870
+5230 y Ft(bind)f([-m)g Fj(keymap)p Ft(])e(-x)j Fj(keyseq:shell-command)
+870 5340 y Ft(bind)f([-m)g Fj(keymap)p Ft(])e Fj(keyseq:function-name)p
+eop end
+%%Page: 52 58
+TeXDict begin 52 57 bop 150 -116 a Fu(Chapter)30 b(4:)41
+b(Shell)30 b(Builtin)h(Commands)2069 b(52)870 299 y Ft(bind)47
+b([-m)g Fj(keymap)p Ft(])e Fj(keyseq:readline-command)630
+432 y Fu(Displa)m(y)22 b(curren)m(t)f(Readline)h(\(see)f(Chapter)g(8)g
+([Command)f(Line)h(Editing],)j(page)e(111\))g(k)m(ey)630
+542 y(and)36 b(function)g(bindings,)i(bind)d(a)i(k)m(ey)g(sequence)g
+(to)h(a)f(Readline)g(function)f(or)h(macro,)630 651 y(or)44
+b(set)h(a)g(Readline)f(v)-5 b(ariable.)83 b(Eac)m(h)45
+b(non-option)g(argumen)m(t)f(is)g(a)h(command)f(as)g(it)630
+761 y(w)m(ould)e(app)s(ear)f(in)h(a)h(Readline)g(initialization)i
+(\014le)d(\(see)h(Section)g(8.3)g([Readline)g(Init)630
+870 y(File],)c(page)d(114\),)j(but)c(eac)m(h)h(binding)f(or)g(command)h
+(m)m(ust)f(b)s(e)g(passed)g(as)h(a)g(separate)630 980
+y(argumen)m(t;)31 b(e.g.,)h(`)p Ft("\\C-x\\C-r":re-read-init-f)o(ile)p
+Fu('.)630 1113 y(Options,)e(if)h(supplied,)e(ha)m(v)m(e)i(the)g(follo)m
+(wing)h(meanings:)630 1270 y Ft(-m)e Fj(keymap)66 b Fu(Use)54
+b Fr(k)m(eymap)j Fu(as)d(the)g(k)m(eymap)g(to)h(b)s(e)e(a\013ected)i(b)
+m(y)f(the)g(subsequen)m(t)1110 1379 y(bindings.)46 b(Acceptable)34
+b Fr(k)m(eymap)i Fu(names)c(are)h Ft(emacs)p Fu(,)f Ft(emacs-standard)p
+Fu(,)1110 1489 y Ft(emacs-meta)p Fu(,)99 b Ft(emacs-ctlx)p
+Fu(,)f Ft(vi)p Fu(,)j Ft(vi-move)p Fu(,)f Ft(vi-command)p
+Fu(,)f(and)1110 1598 y Ft(vi-insert)p Fu(.)81 b Ft(vi)44
+b Fu(is)h(equiv)-5 b(alen)m(t)46 b(to)g Ft(vi-command)c
+Fu(\()p Ft(vi-move)h Fu(is)i(also)h(a)1110 1708 y(synon)m(ym\);)30
+b Ft(emacs)f Fu(is)i(equiv)-5 b(alen)m(t)32 b(to)f Ft(emacs-standard)p
+Fu(.)630 1864 y Ft(-l)384 b Fu(List)31 b(the)f(names)g(of)h(all)g
+(Readline)g(functions.)630 2021 y Ft(-p)384 b Fu(Displa)m(y)34
+b(Readline)f(function)g(names)g(and)f(bindings)f(in)i(suc)m(h)f(a)i(w)m
+(a)m(y)f(that)1110 2131 y(they)e(can)f(b)s(e)g(used)g(as)g(input)g(or)g
+(in)g(a)h(Readline)g(initialization)i(\014le.)630 2287
+y Ft(-P)384 b Fu(List)31 b(curren)m(t)f(Readline)h(function)f(names)g
+(and)g(bindings.)630 2444 y Ft(-v)384 b Fu(Displa)m(y)25
+b(Readline)f(v)-5 b(ariable)25 b(names)f(and)f(v)-5 b(alues)24
+b(in)g(suc)m(h)f(a)i(w)m(a)m(y)f(that)h(they)1110 2553
+y(can)31 b(b)s(e)e(used)h(as)h(input)e(or)h(in)g(a)h(Readline)g
+(initialization)j(\014le.)630 2710 y Ft(-V)384 b Fu(List)31
+b(curren)m(t)f(Readline)h(v)-5 b(ariable)31 b(names)f(and)g(v)-5
+b(alues.)630 2866 y Ft(-s)384 b Fu(Displa)m(y)39 b(Readline)f(k)m(ey)g
+(sequences)f(b)s(ound)f(to)i(macros)g(and)f(the)g(strings)1110
+2976 y(they)d(output)f(in)h(suc)m(h)f(a)h(w)m(a)m(y)h(that)f(they)g
+(can)g(b)s(e)f(used)g(as)h(input)e(or)i(in)g(a)1110 3086
+y(Readline)d(initialization)i(\014le.)630 3242 y Ft(-S)384
+b Fu(Displa)m(y)39 b(Readline)f(k)m(ey)g(sequences)f(b)s(ound)f(to)i
+(macros)g(and)f(the)g(strings)1110 3352 y(they)31 b(output.)630
+3508 y Ft(-f)f Fj(filename)1110 3618 y Fu(Read)h(k)m(ey)g(bindings)e
+(from)h Fr(\014lename)p Fu(.)630 3774 y Ft(-q)g Fj(function)1110
+3884 y Fu(Query)g(ab)s(out)g(whic)m(h)g(k)m(eys)h(in)m(v)m(ok)m(e)h
+(the)f(named)f Fr(function)p Fu(.)630 4041 y Ft(-u)g
+Fj(function)1110 4150 y Fu(Un)m(bind)f(all)i(k)m(eys)g(b)s(ound)e(to)i
+(the)f(named)g Fr(function)p Fu(.)630 4307 y Ft(-r)g
+Fj(keyseq)66 b Fu(Remo)m(v)m(e)32 b(an)m(y)f(curren)m(t)f(binding)f
+(for)h Fr(k)m(eyseq)p Fu(.)630 4463 y Ft(-x)g Fj(keyseq:shell-command)
+1110 4573 y Fu(Cause)35 b Fr(shell-command)k Fu(to)d(b)s(e)f(executed)h
+(whenev)m(er)f Fr(k)m(eyseq)j Fu(is)d(en)m(tered.)1110
+4682 y(When)46 b Fr(shell-command)k Fu(is)c(executed,)51
+b(the)46 b(shell)g(sets)g(the)g Ft(READLINE_)1110 4792
+y(LINE)37 b Fu(v)-5 b(ariable)38 b(to)g(the)g(con)m(ten)m(ts)i(of)e
+(the)g(Readline)g(line)g(bu\013er)f(and)g(the)1110 4902
+y Ft(READLINE_POINT)21 b Fu(and)k Ft(READLINE_MARK)c
+Fu(v)-5 b(ariables)26 b(to)g(the)g(curren)m(t)f(lo)s(ca-)1110
+5011 y(tion)f(of)g(the)g(insertion)g(p)s(oin)m(t)g(and)f(the)h(sa)m(v)m
+(ed)h(insertion)f(p)s(oin)m(t)g(\(the)g Fr(mark)6 b Fu(\),)1110
+5121 y(resp)s(ectiv)m(ely)-8 b(.)43 b(If)30 b(the)h(executed)g(command)
+g(c)m(hanges)g(the)g(v)-5 b(alue)31 b(of)g(an)m(y)g(of)1110
+5230 y Ft(READLINE_LINE)p Fu(,)40 b Ft(READLINE_POINT)p
+Fu(,)f(or)i Ft(READLINE_MARK)p Fu(,)e(those)i(new)1110
+5340 y(v)-5 b(alues)31 b(will)f(b)s(e)g(re\015ected)h(in)f(the)h
+(editing)g(state.)p eop end
+%%Page: 53 59
+TeXDict begin 53 58 bop 150 -116 a Fu(Chapter)30 b(4:)41
+b(Shell)30 b(Builtin)h(Commands)2069 b(53)630 299 y Ft(-X)384
+b Fu(List)27 b(all)i(k)m(ey)f(sequences)f(b)s(ound)e(to)j(shell)g
+(commands)e(and)h(the)g(asso)s(ciated)1110 408 y(commands)j(in)g(a)h
+(format)g(that)f(can)h(b)s(e)f(reused)f(as)i(input.)630
+568 y(The)26 b(return)f(status)i(is)f(zero)i(unless)d(an)i(in)m(v)-5
+b(alid)27 b(option)g(is)f(supplied)f(or)i(an)f(error)g(o)s(ccurs.)150
+727 y Ft(builtin)870 862 y(builtin)46 b([)p Fj(shell-builtin)e
+Ft([)p Fj(args)p Ft(]])630 996 y Fu(Run)35 b(a)i(shell)f(builtin,)i
+(passing)e(it)h Fr(args)p Fu(,)h(and)e(return)f(its)i(exit)g(status.)59
+b(This)35 b(is)i(useful)630 1106 y(when)29 b(de\014ning)h(a)g(shell)h
+(function)f(with)g(the)g(same)h(name)f(as)h(a)g(shell)f(builtin,)g
+(retaining)630 1215 y(the)k(functionalit)m(y)h(of)f(the)f(builtin)g
+(within)g(the)h(function.)50 b(The)33 b(return)g(status)h(is)f(non-)630
+1325 y(zero)e(if)g Fr(shell-builtin)f Fu(is)g(not)h(a)g(shell)f
+(builtin)g(command.)150 1484 y Ft(caller)870 1619 y(caller)46
+b([)p Fj(expr)p Ft(])630 1753 y Fu(Returns)34 b(the)g(con)m(text)j(of)e
+(an)m(y)g(activ)m(e)i(subroutine)c(call)j(\(a)f(shell)g(function)f(or)h
+(a)g(script)630 1863 y(executed)c(with)f(the)h Ft(.)f
+Fu(or)g Ft(source)f Fu(builtins\).)630 1998 y(Without)45
+b Fr(expr)p Fu(,)j Ft(caller)43 b Fu(displa)m(ys)i(the)f(line)h(n)m(um)
+m(b)s(er)f(and)g(source)g(\014lename)h(of)g(the)630 2107
+y(curren)m(t)35 b(subroutine)g(call.)58 b(If)35 b(a)h(non-negativ)m(e)i
+(in)m(teger)f(is)f(supplied)e(as)i Fr(expr)p Fu(,)h Ft(caller)630
+2217 y Fu(displa)m(ys)k(the)f(line)h(n)m(um)m(b)s(er,)h(subroutine)d
+(name,)44 b(and)c(source)g(\014le)h(corresp)s(onding)e(to)630
+2326 y(that)c(p)s(osition)g(in)f(the)h(curren)m(t)f(execution)i(call)g
+(stac)m(k.)54 b(This)34 b(extra)h(information)g(ma)m(y)630
+2436 y(b)s(e)30 b(used,)g(for)g(example,)h(to)g(prin)m(t)f(a)h(stac)m
+(k)h(trace.)42 b(The)29 b(curren)m(t)i(frame)f(is)g(frame)h(0.)630
+2570 y(The)d(return)g(v)-5 b(alue)29 b(is)g(0)g(unless)f(the)h(shell)g
+(is)g(not)g(executing)h(a)f(subroutine)e(call)j(or)f
+Fr(expr)630 2680 y Fu(do)s(es)h(not)h(corresp)s(ond)e(to)i(a)g(v)-5
+b(alid)30 b(p)s(osition)h(in)f(the)g(call)i(stac)m(k.)150
+2839 y Ft(command)870 2974 y(command)46 b([-pVv])g Fj(command)g
+Ft([)p Fj(arguments)f Ft(...)o(])630 3108 y Fu(Runs)32
+b Fr(command)k Fu(with)d Fr(argumen)m(ts)k Fu(ignoring)c(an)m(y)g
+(shell)h(function)e(named)h Fr(command)p Fu(.)630 3218
+y(Only)39 b(shell)i(builtin)e(commands)h(or)g(commands)f(found)g(b)m(y)
+h(searc)m(hing)h(the)f Ft(PATH)f Fu(are)630 3328 y(executed.)59
+b(If)36 b(there)h(is)f(a)h(shell)f(function)g(named)g
+Ft(ls)p Fu(,)h(running)e(`)p Ft(command)29 b(ls)p Fu(')35
+b(within)630 3437 y(the)c(function)f(will)h(execute)g(the)g(external)g
+(command)g Ft(ls)f Fu(instead)g(of)h(calling)h(the)f(func-)630
+3547 y(tion)36 b(recursiv)m(ely)-8 b(.)56 b(The)34 b
+Ft(-p)h Fu(option)g(means)g(to)h(use)f(a)g(default)h(v)-5
+b(alue)35 b(for)g Ft(PATH)f Fu(that)i(is)630 3656 y(guaran)m(teed)f(to)
+f(\014nd)e(all)j(of)f(the)g(standard)f(utilities.)52
+b(The)33 b(return)g(status)h(in)f(this)h(case)630 3766
+y(is)29 b(127)g(if)g Fr(command)j Fu(cannot)d(b)s(e)e(found)h(or)g(an)g
+(error)h(o)s(ccurred,)f(and)g(the)h(exit)g(status)g(of)630
+3875 y Fr(command)34 b Fu(otherwise.)630 4010 y(If)e(either)h(the)f
+Ft(-V)g Fu(or)g Ft(-v)g Fu(option)h(is)f(supplied,)g(a)h(description)f
+(of)h Fr(command)j Fu(is)c(prin)m(ted.)630 4120 y(The)f
+Ft(-v)h Fu(option)g(causes)g(a)g(single)h(w)m(ord)f(indicating)g(the)g
+(command)g(or)g(\014le)g(name)g(used)630 4229 y(to)40
+b(in)m(v)m(ok)m(e)h Fr(command)h Fu(to)e(b)s(e)e(displa)m(y)m(ed;)44
+b(the)39 b Ft(-V)f Fu(option)i(pro)s(duces)d(a)j(more)f(v)m(erb)s(ose)
+630 4339 y(description.)61 b(In)36 b(this)h(case,)j(the)e(return)e
+(status)h(is)g(zero)h(if)f Fr(command)k Fu(is)c(found,)h(and)630
+4448 y(non-zero)31 b(if)f(not.)150 4608 y Ft(declare)870
+4742 y(declare)46 b([-aAfFgiIlnrtux])d([-p])k([)p Fj(name)p
+Ft([=)p Fj(value)p Ft(])d(...)o(])630 4877 y Fu(Declare)29
+b(v)-5 b(ariables)28 b(and)e(giv)m(e)j(them)e(attributes.)40
+b(If)27 b(no)g Fr(name)5 b Fu(s)27 b(are)h(giv)m(en,)h(then)e(displa)m
+(y)630 4986 y(the)k(v)-5 b(alues)30 b(of)h(v)-5 b(ariables)31
+b(instead.)630 5121 y(The)k Ft(-p)f Fu(option)i(will)g(displa)m(y)f
+(the)h(attributes)g(and)e(v)-5 b(alues)36 b(of)f(eac)m(h)i
+Fr(name)p Fu(.)55 b(When)36 b Ft(-p)630 5230 y Fu(is)i(used)g(with)g
+Fr(name)43 b Fu(argumen)m(ts,)e(additional)e(options,)i(other)d(than)g
+Ft(-f)g Fu(and)g Ft(-F)p Fu(,)i(are)630 5340 y(ignored.)p
+eop end
+%%Page: 54 60
+TeXDict begin 54 59 bop 150 -116 a Fu(Chapter)30 b(4:)41
+b(Shell)30 b(Builtin)h(Commands)2069 b(54)630 299 y(When)40
+b Ft(-p)g Fu(is)g(supplied)f(without)i Fr(name)k Fu(argumen)m(ts,)f
+Ft(declare)38 b Fu(will)j(displa)m(y)f(the)h(at-)630
+408 y(tributes)31 b(and)f(v)-5 b(alues)31 b(of)g(all)h(v)-5
+b(ariables)31 b(ha)m(ving)h(the)f(attributes)g(sp)s(eci\014ed)f(b)m(y)h
+(the)g(addi-)630 518 y(tional)k(options.)52 b(If)34 b(no)g(other)g
+(options)g(are)g(supplied)f(with)h Ft(-p)p Fu(,)g Ft(declare)e
+Fu(will)j(displa)m(y)630 628 y(the)e(attributes)h(and)e(v)-5
+b(alues)33 b(of)g(all)h(shell)f(v)-5 b(ariables.)50 b(The)32
+b Ft(-f)g Fu(option)i(will)f(restrict)h(the)630 737 y(displa)m(y)d(to)g
+(shell)f(functions.)630 877 y(The)41 b Ft(-F)f Fu(option)i(inhibits)e
+(the)i(displa)m(y)f(of)g(function)g(de\014nitions;)47
+b(only)41 b(the)g(function)630 986 y(name)30 b(and)f(attributes)i(are)f
+(prin)m(ted.)40 b(If)30 b(the)g Ft(extdebug)e Fu(shell)i(option)g(is)g
+(enabled)g(using)630 1096 y Ft(shopt)24 b Fu(\(see)i(Section)g(4.3.2)i
+([The)d(Shopt)f(Builtin],)k(page)e(66\),)i(the)d(source)h(\014le)f
+(name)h(and)630 1205 y(line)31 b(n)m(um)m(b)s(er)e(where)h(eac)m(h)h
+Fr(name)36 b Fu(is)30 b(de\014ned)f(are)i(displa)m(y)m(ed)g(as)g(w)m
+(ell.)41 b Ft(-F)30 b Fu(implies)h Ft(-f)p Fu(.)630 1345
+y(The)36 b Ft(-g)g Fu(option)h(forces)g(v)-5 b(ariables)37
+b(to)g(b)s(e)f(created)i(or)e(mo)s(di\014ed)g(at)h(the)g(global)h(scop)
+s(e,)630 1455 y(ev)m(en)g(when)e Ft(declare)f Fu(is)j(executed)g(in)f
+(a)g(shell)h(function.)61 b(It)37 b(is)g(ignored)h(in)f(all)h(other)630
+1564 y(cases.)630 1704 y(The)50 b Ft(-I)h Fu(option)g(causes)h(lo)s
+(cal)g(v)-5 b(ariables)51 b(to)h(inherit)f(the)g(attributes)g(\(except)
+i(the)630 1813 y Fr(nameref)63 b Fu(attribute\))46 b(and)f(v)-5
+b(alue)45 b(of)h(an)m(y)f(existing)i(v)-5 b(ariable)46
+b(with)f(the)g(same)h Fr(name)630 1923 y Fu(at)40 b(a)f(surrounding)d
+(scop)s(e.)66 b(If)39 b(there)g(is)g(no)f(existing)i(v)-5
+b(ariable,)42 b(the)d(lo)s(cal)h(v)-5 b(ariable)40 b(is)630
+2032 y(initially)32 b(unset.)630 2172 y(The)27 b(follo)m(wing)h
+(options)g(can)f(b)s(e)g(used)f(to)i(restrict)g(output)e(to)i(v)-5
+b(ariables)28 b(with)f(the)g(sp)s(ec-)630 2281 y(i\014ed)j(attributes)h
+(or)f(to)h(giv)m(e)h(v)-5 b(ariables)31 b(attributes:)630
+2451 y Ft(-a)384 b Fu(Eac)m(h)36 b Fr(name)k Fu(is)34
+b(an)h(indexed)g(arra)m(y)g(v)-5 b(ariable)36 b(\(see)f(Section)h(6.7)g
+([Arra)m(ys],)1110 2560 y(page)31 b(95\).)630 2730 y
+Ft(-A)384 b Fu(Eac)m(h)24 b Fr(name)k Fu(is)23 b(an)g(asso)s(ciativ)m
+(e)j(arra)m(y)e(v)-5 b(ariable)24 b(\(see)g(Section)g(6.7)g([Arra)m
+(ys],)1110 2839 y(page)31 b(95\).)630 3009 y Ft(-f)384
+b Fu(Use)31 b(function)f(names)g(only)-8 b(.)630 3178
+y Ft(-i)384 b Fu(The)36 b(v)-5 b(ariable)37 b(is)f(to)h(b)s(e)f
+(treated)h(as)g(an)f(in)m(teger;)41 b(arithmetic)c(ev)-5
+b(aluation)1110 3288 y(\(see)29 b(Section)f(6.5)h([Shell)f
+(Arithmetic],)i(page)e(93\))h(is)f(p)s(erformed)e(when)h(the)1110
+3397 y(v)-5 b(ariable)31 b(is)g(assigned)f(a)h(v)-5 b(alue.)630
+3567 y Ft(-l)384 b Fu(When)26 b(the)g(v)-5 b(ariable)27
+b(is)f(assigned)g(a)g(v)-5 b(alue,)28 b(all)f(upp)s(er-case)e(c)m
+(haracters)j(are)1110 3676 y(con)m(v)m(erted)k(to)f(lo)m(w)m(er-case.)
+43 b(The)30 b(upp)s(er-case)g(attribute)h(is)g(disabled.)630
+3846 y Ft(-n)384 b Fu(Giv)m(e)28 b(eac)m(h)g Fr(name)k
+Fu(the)27 b Fr(nameref)44 b Fu(attribute,)28 b(making)f(it)h(a)f(name)f
+(reference)1110 3955 y(to)32 b(another)g(v)-5 b(ariable.)46
+b(That)31 b(other)h(v)-5 b(ariable)33 b(is)f(de\014ned)e(b)m(y)i(the)g
+(v)-5 b(alue)32 b(of)1110 4065 y Fr(name)p Fu(.)54 b(All)35
+b(references,)h(assignmen)m(ts,)h(and)d(attribute)h(mo)s(di\014cations)
+g(to)1110 4174 y Fr(name)p Fu(,)27 b(except)f(for)f(those)h(using)f(or)
+g(c)m(hanging)h(the)f Ft(-n)g Fu(attribute)h(itself,)i(are)1110
+4284 y(p)s(erformed)22 b(on)h(the)g(v)-5 b(ariable)25
+b(referenced)e(b)m(y)g Fr(name)5 b Fu('s)23 b(v)-5 b(alue.)39
+b(The)23 b(nameref)1110 4394 y(attribute)31 b(cannot)g(b)s(e)f(applied)
+g(to)h(arra)m(y)g(v)-5 b(ariables.)630 4563 y Ft(-r)384
+b Fu(Mak)m(e)25 b Fr(name)5 b Fu(s)23 b(readonly)-8 b(.)39
+b(These)24 b(names)f(cannot)h(then)f(b)s(e)g(assigned)h(v)-5
+b(alues)1110 4672 y(b)m(y)30 b(subsequen)m(t)g(assignmen)m(t)h
+(statemen)m(ts)h(or)f(unset.)630 4842 y Ft(-t)384 b Fu(Giv)m(e)33
+b(eac)m(h)h Fr(name)j Fu(the)32 b Ft(trace)f Fu(attribute.)46
+b(T)-8 b(raced)32 b(functions)g(inherit)g(the)1110 4951
+y Ft(DEBUG)26 b Fu(and)h Ft(RETURN)f Fu(traps)h(from)g(the)h(calling)h
+(shell.)40 b(The)27 b(trace)i(attribute)1110 5061 y(has)h(no)g(sp)s
+(ecial)h(meaning)g(for)f(v)-5 b(ariables.)630 5230 y
+Ft(-u)384 b Fu(When)28 b(the)h(v)-5 b(ariable)29 b(is)f(assigned)h(a)f
+(v)-5 b(alue,)30 b(all)f(lo)m(w)m(er-case)i(c)m(haracters)f(are)1110
+5340 y(con)m(v)m(erted)i(to)f(upp)s(er-case.)40 b(The)30
+b(lo)m(w)m(er-case)j(attribute)e(is)g(disabled.)p eop
+end
+%%Page: 55 61
+TeXDict begin 55 60 bop 150 -116 a Fu(Chapter)30 b(4:)41
+b(Shell)30 b(Builtin)h(Commands)2069 b(55)630 299 y Ft(-x)384
+b Fu(Mark)30 b(eac)m(h)h Fr(name)k Fu(for)29 b(exp)s(ort)h(to)g
+(subsequen)m(t)f(commands)h(via)g(the)g(en)m(vi-)1110
+408 y(ronmen)m(t.)630 560 y(Using)e(`)p Ft(+)p Fu(')h(instead)f(of)g(`)
+p Ft(-)p Fu(')g(turns)f(o\013)i(the)f(attribute)h(instead,)g(with)f
+(the)g(exceptions)h(that)630 670 y(`)p Ft(+a)p Fu(')23
+b(and)f(`)p Ft(+A)p Fu(')h(ma)m(y)h(not)f(b)s(e)f(used)g(to)i(destro)m
+(y)g(arra)m(y)f(v)-5 b(ariables)24 b(and)e(`)p Ft(+r)p
+Fu(')h(will)g(not)g(remo)m(v)m(e)630 780 y(the)36 b(readonly)h
+(attribute.)59 b(When)36 b(used)f(in)h(a)h(function,)g
+Ft(declare)d Fu(mak)m(es)j(eac)m(h)h Fr(name)630 889
+y Fu(lo)s(cal,)e(as)d(with)h(the)f Ft(local)f Fu(command,)j(unless)d
+(the)i Ft(-g)f Fu(option)h(is)f(used.)49 b(If)33 b(a)h(v)-5
+b(ariable)630 999 y(name)30 b(is)h(follo)m(w)m(ed)h(b)m(y)e(=)p
+Fr(v)-5 b(alue)p Fu(,)31 b(the)f(v)-5 b(alue)31 b(of)g(the)f(v)-5
+b(ariable)32 b(is)e(set)h(to)g Fr(v)-5 b(alue)p Fu(.)630
+1130 y(When)41 b(using)g Ft(-a)g Fu(or)h Ft(-A)e Fu(and)h(the)h(comp)s
+(ound)e(assignmen)m(t)i(syn)m(tax)g(to)g(create)h(arra)m(y)630
+1239 y(v)-5 b(ariables,)28 b(additional)f(attributes)g(do)f(not)h(tak)m
+(e)h(e\013ect)g(un)m(til)e(subsequen)m(t)g(assignmen)m(ts.)630
+1370 y(The)35 b(return)f(status)i(is)g(zero)g(unless)f(an)g(in)m(v)-5
+b(alid)36 b(option)g(is)g(encoun)m(tered,)h(an)f(attempt)630
+1480 y(is)c(made)g(to)g(de\014ne)f(a)h(function)g(using)f(`)p
+Ft(-f)f(foo=bar)p Fu(',)h(an)h(attempt)g(is)g(made)g(to)h(assign)630
+1589 y(a)42 b(v)-5 b(alue)43 b(to)g(a)f(readonly)g(v)-5
+b(ariable,)47 b(an)42 b(attempt)h(is)f(made)g(to)h(assign)f(a)h(v)-5
+b(alue)42 b(to)h(an)630 1699 y(arra)m(y)30 b(v)-5 b(ariable)30
+b(without)g(using)e(the)i(comp)s(ound)e(assignmen)m(t)i(syn)m(tax)g
+(\(see)h(Section)f(6.7)630 1808 y([Arra)m(ys],)47 b(page)c(95\),)48
+b(one)43 b(of)g(the)g Fr(names)k Fu(is)c(not)g(a)g(v)-5
+b(alid)43 b(shell)g(v)-5 b(ariable)44 b(name,)i(an)630
+1918 y(attempt)28 b(is)f(made)h(to)f(turn)f(o\013)i(readonly)f(status)g
+(for)g(a)h(readonly)f(v)-5 b(ariable,)29 b(an)e(attempt)630
+2028 y(is)h(made)h(to)g(turn)e(o\013)i(arra)m(y)f(status)h(for)f(an)g
+(arra)m(y)h(v)-5 b(ariable,)30 b(or)e(an)g(attempt)i(is)e(made)g(to)630
+2137 y(displa)m(y)j(a)f(non-existen)m(t)i(function)e(with)g
+Ft(-f)p Fu(.)150 2289 y Ft(echo)870 2420 y(echo)47 b([-neE])f([)p
+Fj(arg)g Ft(...])630 2551 y Fu(Output)31 b(the)i Fr(arg)8
+b Fu(s,)33 b(separated)g(b)m(y)g(spaces,)g(terminated)g(with)f(a)h
+(newline.)47 b(The)32 b(return)630 2660 y(status)f(is)f(0)h(unless)f(a)
+h(write)g(error)f(o)s(ccurs.)41 b(If)30 b Ft(-n)g Fu(is)h(sp)s
+(eci\014ed,)f(the)h(trailing)g(newline)g(is)630 2770
+y(suppressed.)38 b(If)29 b(the)h Ft(-e)f Fu(option)h(is)f(giv)m(en,)i
+(in)m(terpretation)g(of)e(the)h(follo)m(wing)h(bac)m(kslash-)630
+2880 y(escap)s(ed)43 b(c)m(haracters)h(is)e(enabled.)78
+b(The)42 b Ft(-E)g Fu(option)h(disables)g(the)g(in)m(terpretation)h(of)
+630 2989 y(these)27 b(escap)s(e)g(c)m(haracters,)i(ev)m(en)e(on)g
+(systems)f(where)g(they)h(are)g(in)m(terpreted)g(b)m(y)f(default.)630
+3099 y(The)32 b Ft(xpg_echo)f Fu(shell)i(option)g(ma)m(y)h(b)s(e)e
+(used)g(to)h(dynamically)h(determine)f(whether)f(or)630
+3208 y(not)h Ft(echo)f Fu(expands)g(these)h(escap)s(e)h(c)m(haracters)g
+(b)m(y)f(default.)48 b Ft(echo)32 b Fu(do)s(es)g(not)i(in)m(terpret)630
+3318 y Ft(--)c Fu(to)h(mean)f(the)h(end)f(of)g(options.)630
+3449 y Ft(echo)f Fu(in)m(terprets)i(the)f(follo)m(wing)i(escap)s(e)f
+(sequences:)630 3601 y Ft(\\a)384 b Fu(alert)31 b(\(b)s(ell\))630
+3753 y Ft(\\b)384 b Fu(bac)m(kspace)630 3905 y Ft(\\c)g
+Fu(suppress)28 b(further)h(output)630 4057 y Ft(\\e)630
+4166 y(\\E)384 b Fu(escap)s(e)630 4318 y Ft(\\f)g Fu(form)30
+b(feed)630 4470 y Ft(\\n)384 b Fu(new)30 b(line)630 4622
+y Ft(\\r)384 b Fu(carriage)32 b(return)630 4774 y Ft(\\t)384
+b Fu(horizon)m(tal)32 b(tab)630 4926 y Ft(\\v)384 b Fu(v)m(ertical)32
+b(tab)630 5078 y Ft(\\\\)384 b Fu(bac)m(kslash)630 5230
+y Ft(\\0)p Fj(nnn)240 b Fu(the)32 b(eigh)m(t-bit)i(c)m(haracter)g
+(whose)e(v)-5 b(alue)33 b(is)f(the)g(o)s(ctal)i(v)-5
+b(alue)32 b Fr(nnn)f Fu(\(zero)i(to)1110 5340 y(three)e(o)s(ctal)g
+(digits\))p eop end
+%%Page: 56 62
+TeXDict begin 56 61 bop 150 -116 a Fu(Chapter)30 b(4:)41
+b(Shell)30 b(Builtin)h(Commands)2069 b(56)630 299 y Ft(\\x)p
+Fj(HH)288 b Fu(the)38 b(eigh)m(t-bit)i(c)m(haracter)g(whose)e(v)-5
+b(alue)39 b(is)f(the)h(hexadecimal)g(v)-5 b(alue)39 b
+Fr(HH)1110 408 y Fu(\(one)31 b(or)f(t)m(w)m(o)i(hex)e(digits\))630
+563 y Ft(\\u)p Fj(HHHH)192 b Fu(the)41 b(Unico)s(de)g(\(ISO/IEC)f
+(10646\))j(c)m(haracter)g(whose)e(v)-5 b(alue)41 b(is)g(the)g(hex-)1110
+673 y(adecimal)32 b(v)-5 b(alue)31 b Fr(HHHH)41 b Fu(\(one)31
+b(to)g(four)e(hex)h(digits\))630 828 y Ft(\\U)p Fj(HHHHHHHH)1110
+938 y Fu(the)41 b(Unico)s(de)g(\(ISO/IEC)f(10646\))j(c)m(haracter)g
+(whose)e(v)-5 b(alue)41 b(is)g(the)g(hex-)1110 1047 y(adecimal)32
+b(v)-5 b(alue)31 b Fr(HHHHHHHH)41 b Fu(\(one)31 b(to)g(eigh)m(t)h(hex)e
+(digits\))150 1202 y Ft(enable)870 1334 y(enable)46 b([-a])h([-dnps])f
+([-f)g Fj(filename)p Ft(])g([)p Fj(name)g Ft(...)o(])630
+1467 y Fu(Enable)36 b(and)f(disable)h(builtin)g(shell)g(commands.)56
+b(Disabling)37 b(a)g(builtin)e(allo)m(ws)i(a)f(disk)630
+1576 y(command)e(whic)m(h)g(has)g(the)g(same)h(name)f(as)h(a)f(shell)h
+(builtin)e(to)i(b)s(e)f(executed)h(without)630 1686 y(sp)s(ecifying)27
+b(a)g(full)g(pathname,)g(ev)m(en)h(though)f(the)g(shell)g(normally)g
+(searc)m(hes)h(for)f(builtins)630 1795 y(b)s(efore)35
+b(disk)g(commands.)55 b(If)35 b Ft(-n)g Fu(is)g(used,)h(the)g
+Fr(name)5 b Fu(s)35 b(b)s(ecome)h(disabled.)55 b(Otherwise)630
+1905 y Fr(name)5 b Fu(s)44 b(are)h(enabled.)82 b(F)-8
+b(or)45 b(example,)k(to)c(use)f(the)g Ft(test)f Fu(binary)h(found)f
+(via)h Ft($PATH)630 2015 y Fu(instead)31 b(of)f(the)h(shell)f(builtin)g
+(v)m(ersion,)h(t)m(yp)s(e)g(`)p Ft(enable)e(-n)h(test)p
+Fu('.)630 2147 y(If)45 b(the)i Ft(-p)e Fu(option)h(is)g(supplied,)j(or)
+d(no)g Fr(name)51 b Fu(argumen)m(ts)46 b(app)s(ear,)k(a)c(list)h(of)f
+(shell)630 2256 y(builtins)37 b(is)h(prin)m(ted.)63 b(With)38
+b(no)f(other)h(argumen)m(ts,)j(the)d(list)g(consists)g(of)g(all)h
+(enabled)630 2366 y(shell)d(builtins.)57 b(The)35 b Ft(-a)h
+Fu(option)g(means)g(to)g(list)h(eac)m(h)g(builtin)f(with)f(an)h
+(indication)h(of)630 2476 y(whether)30 b(or)g(not)h(it)g(is)f(enabled.)
+630 2608 y(The)22 b Ft(-f)f Fu(option)h(means)g(to)h(load)g(the)f(new)g
+(builtin)f(command)h Fr(name)27 b Fu(from)22 b(shared)f(ob)5
+b(ject)630 2717 y Fr(\014lename)p Fu(,)33 b(on)e(systems)h(that)h(supp)
+s(ort)d(dynamic)i(loading.)46 b(The)31 b Ft(-d)g Fu(option)h(will)h
+(delete)630 2827 y(a)e(builtin)f(loaded)h(with)f Ft(-f)p
+Fu(.)630 2959 y(If)j(there)i(are)f(no)g(options,)h(a)f(list)h(of)f(the)
+g(shell)g(builtins)g(is)g(displa)m(y)m(ed.)52 b(The)33
+b Ft(-s)g Fu(option)630 3069 y(restricts)j Ft(enable)d
+Fu(to)j(the)f Fm(posix)f Fu(sp)s(ecial)i(builtins.)54
+b(If)34 b Ft(-s)h Fu(is)g(used)f(with)g Ft(-f)p Fu(,)i(the)f(new)630
+3178 y(builtin)30 b(b)s(ecomes)h(a)f(sp)s(ecial)h(builtin)f(\(see)i
+(Section)f(4.4)g([Sp)s(ecial)g(Builtins],)g(page)g(72\).)630
+3311 y(The)26 b(return)f(status)h(is)g(zero)h(unless)e(a)i
+Fr(name)k Fu(is)26 b(not)g(a)h(shell)f(builtin)g(or)g(there)g(is)g(an)g
+(error)630 3420 y(loading)31 b(a)g(new)f(builtin)g(from)g(a)g(shared)g
+(ob)5 b(ject.)150 3575 y Ft(help)870 3707 y(help)47 b([-dms])f([)p
+Fj(pattern)p Ft(])630 3840 y Fu(Displa)m(y)40 b(helpful)e(information)h
+(ab)s(out)g(builtin)f(commands.)66 b(If)38 b Fr(pattern)h
+Fu(is)g(sp)s(eci\014ed,)630 3949 y Ft(help)28 b Fu(giv)m(es)i(detailed)
+g(help)e(on)h(all)h(commands)e(matc)m(hing)i Fr(pattern)p
+Fu(,)g(otherwise)f(a)g(list)h(of)630 4059 y(the)h(builtins)e(is)i(prin)
+m(ted.)630 4191 y(Options,)f(if)h(supplied,)e(ha)m(v)m(e)i(the)g(follo)
+m(wing)h(meanings:)630 4346 y Ft(-d)384 b Fu(Displa)m(y)32
+b(a)e(short)g(description)h(of)f(eac)m(h)i Fr(pattern)630
+4501 y Ft(-m)384 b Fu(Displa)m(y)32 b(the)e(description)g(of)h(eac)m(h)
+h Fr(pattern)e Fu(in)g(a)h(manpage-lik)m(e)h(format)630
+4656 y Ft(-s)384 b Fu(Displa)m(y)32 b(only)e(a)h(short)f(usage)h
+(synopsis)e(for)i(eac)m(h)g Fr(pattern)630 4811 y Fu(The)f(return)f
+(status)i(is)f(zero)h(unless)f(no)g(command)h(matc)m(hes)g
+Fr(pattern)p Fu(.)150 4966 y Ft(let)870 5098 y(let)47
+b Fj(expression)e Ft([)p Fj(expression)g Ft(...)o(])630
+5230 y Fu(The)c Ft(let)g Fu(builtin)g(allo)m(ws)i(arithmetic)f(to)h(b)s
+(e)d(p)s(erformed)g(on)i(shell)g(v)-5 b(ariables.)74
+b(Eac)m(h)630 5340 y Fr(expression)31 b Fu(is)g(ev)-5
+b(aluated)32 b(according)f(to)h(the)f(rules)g(giv)m(en)h(b)s(elo)m(w)f
+(in)f(Section)i(6.5)g([Shell)p eop end
+%%Page: 57 63
+TeXDict begin 57 62 bop 150 -116 a Fu(Chapter)30 b(4:)41
+b(Shell)30 b(Builtin)h(Commands)2069 b(57)630 299 y(Arithmetic],)51
+b(page)46 b(93.)87 b(If)45 b(the)g(last)h Fr(expression)g
+Fu(ev)-5 b(aluates)47 b(to)f(0,)k Ft(let)44 b Fu(returns)g(1;)630
+408 y(otherwise)31 b(0)g(is)f(returned.)150 568 y Ft(local)870
+702 y(local)46 b([)p Fj(option)p Ft(])g Fj(name)p Ft([=)p
+Fj(value)p Ft(])e(...)630 836 y Fu(F)-8 b(or)27 b(eac)m(h)g(argumen)m
+(t,)g(a)f(lo)s(cal)h(v)-5 b(ariable)27 b(named)e Fr(name)31
+b Fu(is)26 b(created,)i(and)d(assigned)h Fr(v)-5 b(alue)p
+Fu(.)630 946 y(The)37 b Fr(option)h Fu(can)f(b)s(e)g(an)m(y)h(of)f(the)
+h(options)g(accepted)g(b)m(y)g Ft(declare)p Fu(.)59 b
+Ft(local)36 b Fu(can)i(only)630 1055 y(b)s(e)j(used)h(within)f(a)i
+(function;)48 b(it)42 b(mak)m(es)h(the)f(v)-5 b(ariable)43
+b Fr(name)48 b Fu(ha)m(v)m(e)43 b(a)f(visible)h(scop)s(e)630
+1165 y(restricted)h(to)f(that)h(function)e(and)g(its)i(c)m(hildren.)78
+b(If)42 b Fr(name)48 b Fu(is)43 b(`)p Ft(-)p Fu(',)j(the)d(set)h(of)f
+(shell)630 1275 y(options)34 b(is)f(made)g(lo)s(cal)i(to)f(the)f
+(function)g(in)g(whic)m(h)g Ft(local)f Fu(is)h(in)m(v)m(ok)m(ed:)48
+b(shell)34 b(options)630 1384 y(c)m(hanged)e(using)e(the)i
+Ft(set)e Fu(builtin)h(inside)g(the)g(function)g(are)g(restored)h(to)g
+(their)f(original)630 1494 y(v)-5 b(alues)36 b(when)e(the)i(function)f
+(returns.)54 b(The)35 b(restore)h(is)g(e\013ected)h(as)e(if)h(a)g
+(series)f(of)h Ft(set)630 1603 y Fu(commands)j(w)m(ere)g(executed)h(to)
+f(restore)h(the)f(v)-5 b(alues)39 b(that)h(w)m(ere)f(in)f(place)i(b)s
+(efore)f(the)630 1713 y(function.)j(The)30 b(return)g(status)h(is)g
+(zero)h(unless)e Ft(local)g Fu(is)h(used)f(outside)h(a)g(function,)g
+(an)630 1823 y(in)m(v)-5 b(alid)31 b Fr(name)k Fu(is)c(supplied,)e(or)i
+Fr(name)k Fu(is)c(a)f(readonly)h(v)-5 b(ariable.)150
+1982 y Ft(logout)870 2116 y(logout)46 b([)p Fj(n)p Ft(])630
+2250 y Fu(Exit)31 b(a)g(login)g(shell,)g(returning)e(a)i(status)g(of)f
+Fr(n)g Fu(to)h(the)g(shell's)f(paren)m(t.)150 2409 y
+Ft(mapfile)870 2544 y(mapfile)46 b([-d)h Fj(delim)p Ft(])f([-n)h
+Fj(count)p Ft(])f([-O)h Fj(origin)p Ft(])f([-s)g Fj(count)p
+Ft(])1061 2653 y([-t])h([-u)f Fj(fd)p Ft(])h([-C)g Fj(callback)p
+Ft(])f([-c)g Fj(quantum)p Ft(])g([)p Fj(array)p Ft(])630
+2788 y Fu(Read)38 b(lines)f(from)g(the)h(standard)e(input)g(in)m(to)j
+(the)e(indexed)g(arra)m(y)h(v)-5 b(ariable)38 b Fr(arra)m(y)p
+Fu(,)i(or)630 2897 y(from)28 b(\014le)h(descriptor)f
+Fr(fd)k Fu(if)c(the)h Ft(-u)f Fu(option)h(is)g(supplied.)39
+b(The)28 b(v)-5 b(ariable)29 b Ft(MAPFILE)e Fu(is)i(the)630
+3007 y(default)i Fr(arra)m(y)p Fu(.)41 b(Options,)30
+b(if)g(supplied,)g(ha)m(v)m(e)h(the)g(follo)m(wing)h(meanings:)630
+3166 y Ft(-d)384 b Fu(The)37 b(\014rst)g(c)m(haracter)i(of)f
+Fr(delim)g Fu(is)f(used)g(to)h(terminate)h(eac)m(h)g(input)d(line,)1110
+3275 y(rather)41 b(than)h(newline.)74 b(If)41 b Fr(delim)h
+Fu(is)g(the)f(empt)m(y)h(string,)j Ft(mapfile)40 b Fu(will)1110
+3385 y(terminate)31 b(a)g(line)g(when)e(it)i(reads)f(a)h(NUL)g(c)m
+(haracter.)630 3544 y Ft(-n)384 b Fu(Cop)m(y)30 b(at)h(most)g
+Fr(coun)m(t)i Fu(lines.)41 b(If)30 b Fr(coun)m(t)j Fu(is)d(0,)h(all)h
+(lines)e(are)h(copied.)630 3703 y Ft(-O)384 b Fu(Begin)31
+b(assigning)g(to)g Fr(arra)m(y)39 b Fu(at)31 b(index)f
+Fr(origin)p Fu(.)41 b(The)30 b(default)h(index)f(is)g(0.)630
+3862 y Ft(-s)384 b Fu(Discard)31 b(the)f(\014rst)g Fr(coun)m(t)j
+Fu(lines)e(read.)630 4021 y Ft(-t)384 b Fu(Remo)m(v)m(e)32
+b(a)f(trailing)g Fr(delim)g Fu(\(default)g(newline\))f(from)g(eac)m(h)i
+(line)f(read.)630 4180 y Ft(-u)384 b Fu(Read)31 b(lines)f(from)g
+(\014le)h(descriptor)f Fr(fd)j Fu(instead)e(of)f(the)h(standard)e
+(input.)630 4340 y Ft(-C)384 b Fu(Ev)-5 b(aluate)26 b
+Fr(callbac)m(k)33 b Fu(eac)m(h)26 b(time)g Fr(quan)m(tum)f
+Fu(lines)g(are)g(read.)39 b(The)25 b Ft(-c)f Fu(option)1110
+4449 y(sp)s(eci\014es)30 b Fr(quan)m(tum)p Fu(.)630 4608
+y Ft(-c)384 b Fu(Sp)s(ecify)30 b(the)g(n)m(um)m(b)s(er)f(of)i(lines)f
+(read)h(b)s(et)m(w)m(een)g(eac)m(h)g(call)h(to)f Fr(callbac)m(k)p
+Fu(.)630 4767 y(If)36 b Ft(-C)g Fu(is)g(sp)s(eci\014ed)g(without)g
+Ft(-c)p Fu(,)h(the)g(default)f(quan)m(tum)g(is)h(5000.)60
+b(When)36 b Fr(callbac)m(k)44 b Fu(is)630 4877 y(ev)-5
+b(aluated,)30 b(it)e(is)g(supplied)f(the)h(index)f(of)i(the)f(next)g
+(arra)m(y)g(elemen)m(t)h(to)g(b)s(e)e(assigned)i(and)630
+4986 y(the)39 b(line)g(to)h(b)s(e)e(assigned)h(to)h(that)f(elemen)m(t)i
+(as)e(additional)h(argumen)m(ts.)66 b Fr(callbac)m(k)47
+b Fu(is)630 5096 y(ev)-5 b(aluated)32 b(after)e(the)h(line)g(is)f(read)
+g(but)g(b)s(efore)g(the)h(arra)m(y)g(elemen)m(t)g(is)g(assigned.)630
+5230 y(If)25 b(not)g(supplied)f(with)h(an)g(explicit)i(origin,)g
+Ft(mapfile)c Fu(will)j(clear)g Fr(arra)m(y)34 b Fu(b)s(efore)24
+b(assigning)630 5340 y(to)31 b(it.)p eop end
+%%Page: 58 64
+TeXDict begin 58 63 bop 150 -116 a Fu(Chapter)30 b(4:)41
+b(Shell)30 b(Builtin)h(Commands)2069 b(58)630 299 y Ft(mapfile)41
+b Fu(returns)g(successfully)i(unless)e(an)i(in)m(v)-5
+b(alid)43 b(option)g(or)g(option)g(argumen)m(t)g(is)630
+408 y(supplied,)29 b Fr(arra)m(y)39 b Fu(is)30 b(in)m(v)-5
+b(alid)31 b(or)g(unassignable,)f(or)h Fr(arra)m(y)38
+b Fu(is)31 b(not)f(an)h(indexed)e(arra)m(y)-8 b(.)150
+564 y Ft(printf)870 697 y(printf)46 b([-v)h Fj(var)p
+Ft(])g Fj(format)f Ft([)p Fj(arguments)p Ft(])630 830
+y Fu(W)-8 b(rite)27 b(the)g(formatted)f Fr(argumen)m(ts)k
+Fu(to)d(the)f(standard)f(output)h(under)e(the)i(con)m(trol)i(of)e(the)
+630 939 y Fr(format)p Fu(.)66 b(The)39 b Ft(-v)f Fu(option)h(causes)g
+(the)g(output)g(to)g(b)s(e)f(assigned)h(to)h(the)f(v)-5
+b(ariable)39 b Fr(v)-5 b(ar)630 1049 y Fu(rather)30 b(than)g(b)s(eing)g
+(prin)m(ted)g(to)h(the)g(standard)e(output.)630 1181
+y(The)36 b Fr(format)i Fu(is)f(a)f(c)m(haracter)i(string)e(whic)m(h)g
+(con)m(tains)i(three)e(t)m(yp)s(es)g(of)h(ob)5 b(jects:)53
+b(plain)630 1291 y(c)m(haracters,)41 b(whic)m(h)c(are)h(simply)e
+(copied)i(to)g(standard)f(output,)i(c)m(haracter)g(escap)s(e)e(se-)630
+1401 y(quences,)g(whic)m(h)f(are)g(con)m(v)m(erted)h(and)f(copied)g(to)
+g(the)g(standard)f(output,)i(and)f(format)630 1510 y(sp)s
+(eci\014cations,)j(eac)m(h)e(of)g(whic)m(h)f(causes)g(prin)m(ting)g(of)
+h(the)f(next)h(successiv)m(e)g Fr(argumen)m(t)p Fu(.)630
+1620 y(In)24 b(addition)h(to)g(the)g(standard)f Ft(printf\(1\))e
+Fu(formats,)27 b Ft(printf)c Fu(in)m(terprets)i(the)f(follo)m(wing)630
+1729 y(extensions:)630 1885 y Ft(\045b)384 b Fu(Causes)38
+b Ft(printf)f Fu(to)j(expand)e(bac)m(kslash)h(escap)s(e)g(sequences)g
+(in)f(the)h(cor-)1110 1995 y(resp)s(onding)31 b Fr(argumen)m(t)j
+Fu(in)e(the)h(same)f(w)m(a)m(y)h(as)g Ft(echo)c(-e)j
+Fu(\(see)h(Section)g(4.2)1110 2104 y([Bash)e(Builtins],)g(page)g(51\).)
+630 2260 y Ft(\045q)384 b Fu(Causes)32 b Ft(printf)e
+Fu(to)i(output)g(the)g(corresp)s(onding)f Fr(argumen)m(t)j
+Fu(in)d(a)i(format)1110 2370 y(that)e(can)g(b)s(e)e(reused)h(as)h
+(shell)f(input.)630 2525 y Ft(\045\()p Fj(datefmt)p Ft(\)T)1110
+2635 y Fu(Causes)f Ft(printf)e Fu(to)j(output)f(the)g(date-time)i
+(string)e(resulting)h(from)e(using)1110 2744 y Fr(datefm)m(t)45
+b Fu(as)d(a)g(format)g(string)g(for)g Ft(strftime)p Fu(\(3\).)74
+b(The)41 b(corresp)s(onding)1110 2854 y Fr(argumen)m(t)h
+Fu(is)e(an)g(in)m(teger)i(represen)m(ting)e(the)g(n)m(um)m(b)s(er)f(of)
+h(seconds)g(since)1110 2964 y(the)24 b(ep)s(o)s(c)m(h.)38
+b(Tw)m(o)24 b(sp)s(ecial)h(argumen)m(t)f(v)-5 b(alues)24
+b(ma)m(y)h(b)s(e)e(used:)36 b(-1)25 b(represen)m(ts)1110
+3073 y(the)30 b(curren)m(t)g(time,)h(and)e(-2)i(represen)m(ts)f(the)g
+(time)h(the)f(shell)g(w)m(as)g(in)m(v)m(ok)m(ed.)1110
+3183 y(If)38 b(no)g(argumen)m(t)h(is)f(sp)s(eci\014ed,)i(con)m(v)m
+(ersion)f(b)s(eha)m(v)m(es)g(as)g(if)f(-1)h(had)f(b)s(een)1110
+3292 y(giv)m(en.)k(This)29 b(is)i(an)f(exception)i(to)f(the)f(usual)g
+Ft(printf)f Fu(b)s(eha)m(vior.)630 3448 y(The)d(\045b,)h(\045q,)h(and)e
+(\045T)g(directiv)m(es)j(all)e(use)g(the)g(\014eld)f(width)g(and)h
+(precision)g(argumen)m(ts)630 3558 y(from)f(the)g(format)h(sp)s
+(eci\014cation)g(and)e(write)i(that)f(man)m(y)h(b)m(ytes)f(from)g(\(or)
+h(use)e(that)i(wide)630 3667 y(a)42 b(\014eld)g(for\))g(the)h(expanded)
+e(argumen)m(t,)k(whic)m(h)d(usually)g(con)m(tains)h(more)f(c)m
+(haracters)630 3777 y(than)30 b(the)h(original.)630 3910
+y(Argumen)m(ts)d(to)h(non-string)e(format)i(sp)s(eci\014ers)e(are)h
+(treated)h(as)g(C)e(language)j(constan)m(ts,)630 4019
+y(except)22 b(that)g(a)g(leading)g(plus)e(or)h(min)m(us)f(sign)i(is)f
+(allo)m(w)m(ed,)k(and)c(if)g(the)g(leading)h(c)m(haracter)h(is)630
+4129 y(a)i(single)g(or)f(double)h(quote,)h(the)f(v)-5
+b(alue)25 b(is)f(the)h(ASCI)s(I)e(v)-5 b(alue)25 b(of)f(the)h(follo)m
+(wing)h(c)m(haracter.)630 4261 y(The)31 b Fr(format)i
+Fu(is)f(reused)e(as)i(necessary)f(to)i(consume)e(all)h(of)f(the)h
+Fr(argumen)m(ts)p Fu(.)44 b(If)30 b(the)i Fr(for-)630
+4371 y(mat)c Fu(requires)e(more)g Fr(argumen)m(ts)k Fu(than)25
+b(are)i(supplied,)e(the)h(extra)h(format)f(sp)s(eci\014cations)630
+4481 y(b)s(eha)m(v)m(e)j(as)g(if)f(a)h(zero)g(v)-5 b(alue)29
+b(or)g(n)m(ull)f(string,)h(as)g(appropriate,)g(had)f(b)s(een)g
+(supplied.)38 b(The)630 4590 y(return)29 b(v)-5 b(alue)31
+b(is)g(zero)g(on)f(success,)h(non-zero)g(on)f(failure.)150
+4746 y Ft(read)870 4879 y(read)47 b([-ers])f([-a)h Fj(aname)p
+Ft(])f([-d)h Fj(delim)p Ft(])f([-i)h Fj(text)p Ft(])f([-n)h
+Fj(nchars)p Ft(])1061 4988 y([-N)g Fj(nchars)p Ft(])f([-p)h
+Fj(prompt)p Ft(])e([-t)i Fj(timeout)p Ft(])f([-u)h Fj(fd)p
+Ft(])g([)p Fj(name)f Ft(...)o(])630 5121 y Fu(One)38
+b(line)g(is)g(read)g(from)g(the)g(standard)f(input,)j(or)e(from)f(the)i
+(\014le)f(descriptor)g Fr(fd)j Fu(sup-)630 5230 y(plied)34
+b(as)h(an)f(argumen)m(t)h(to)g(the)f Ft(-u)g Fu(option,)i(split)f(in)m
+(to)g(w)m(ords)f(as)g(describ)s(ed)g(ab)s(o)m(v)m(e)h(in)630
+5340 y(Section)j(3.5.7)h([W)-8 b(ord)38 b(Splitting],)i(page)e(32,)j
+(and)36 b(the)i(\014rst)f(w)m(ord)g(is)g(assigned)h(to)g(the)p
+eop end
+%%Page: 59 65
+TeXDict begin 59 64 bop 150 -116 a Fu(Chapter)30 b(4:)41
+b(Shell)30 b(Builtin)h(Commands)2069 b(59)630 299 y(\014rst)32
+b Fr(name)p Fu(,)h(the)g(second)g(w)m(ord)f(to)h(the)g(second)g
+Fr(name)p Fu(,)g(and)f(so)h(on.)47 b(If)32 b(there)h(are)g(more)630
+408 y(w)m(ords)39 b(than)g(names,)j(the)e(remaining)f(w)m(ords)g(and)g
+(their)h(in)m(terv)m(ening)g(delimiters)h(are)630 518
+y(assigned)29 b(to)h(the)g(last)g Fr(name)p Fu(.)40 b(If)29
+b(there)g(are)h(few)m(er)f(w)m(ords)g(read)g(from)g(the)g(input)g
+(stream)630 628 y(than)35 b(names,)i(the)e(remaining)h(names)f(are)h
+(assigned)f(empt)m(y)h(v)-5 b(alues.)56 b(The)34 b(c)m(haracters)630
+737 y(in)e(the)h(v)-5 b(alue)33 b(of)g(the)g Ft(IFS)f
+Fu(v)-5 b(ariable)33 b(are)h(used)d(to)j(split)f(the)g(line)g(in)m(to)g
+(w)m(ords)g(using)f(the)630 847 y(same)d(rules)f(the)g(shell)h(uses)f
+(for)g(expansion)g(\(describ)s(ed)g(ab)s(o)m(v)m(e)i(in)e(Section)h
+(3.5.7)h([W)-8 b(ord)630 956 y(Splitting],)38 b(page)f(32\).)60
+b(The)35 b(bac)m(kslash)i(c)m(haracter)h(`)p Ft(\\)p
+Fu(')e(ma)m(y)h(b)s(e)f(used)f(to)i(remo)m(v)m(e)h(an)m(y)630
+1066 y(sp)s(ecial)31 b(meaning)g(for)f(the)g(next)h(c)m(haracter)h
+(read)e(and)g(for)g(line)h(con)m(tin)m(uation.)630 1196
+y(Options,)f(if)h(supplied,)e(ha)m(v)m(e)i(the)g(follo)m(wing)h
+(meanings:)630 1348 y Ft(-a)e Fj(aname)114 b Fu(The)34
+b(w)m(ords)f(are)i(assigned)f(to)h(sequen)m(tial)h(indices)e(of)g(the)g
+(arra)m(y)h(v)-5 b(ariable)1110 1457 y Fr(aname)p Fu(,)29
+b(starting)h(at)f(0.)40 b(All)29 b(elemen)m(ts)h(are)e(remo)m(v)m(ed)i
+(from)d Fr(aname)34 b Fu(b)s(efore)1110 1567 y(the)d(assignmen)m(t.)41
+b(Other)30 b Fr(name)36 b Fu(argumen)m(ts)30 b(are)h(ignored.)630
+1718 y Ft(-d)f Fj(delim)114 b Fu(The)41 b(\014rst)h(c)m(haracter)h(of)f
+Fr(delim)g Fu(is)g(used)g(to)g(terminate)h(the)f(input)f(line,)1110
+1828 y(rather)31 b(than)g(newline.)42 b(If)30 b Fr(delim)h
+Fu(is)g(the)h(empt)m(y)f(string,)g Ft(read)f Fu(will)h(termi-)1110
+1937 y(nate)g(a)g(line)f(when)g(it)h(reads)f(a)h(NUL)f(c)m(haracter.)
+630 2089 y Ft(-e)384 b Fu(Readline)46 b(\(see)g(Chapter)e(8)h([Command)
+f(Line)h(Editing],)50 b(page)45 b(111\))i(is)1110 2198
+y(used)37 b(to)i(obtain)g(the)f(line.)65 b(Readline)39
+b(uses)e(the)i(curren)m(t)f(\(or)g(default,)j(if)1110
+2308 y(line)h(editing)g(w)m(as)g(not)g(previously)f(activ)m(e\))k
+(editing)d(settings,)j(but)c(uses)1110 2418 y(Readline's)31
+b(default)g(\014lename)f(completion.)630 2569 y Ft(-i)g
+Fj(text)162 b Fu(If)36 b(Readline)i(is)f(b)s(eing)g(used)f(to)h(read)g
+(the)g(line,)j Fr(text)f Fu(is)e(placed)h(in)m(to)g(the)1110
+2679 y(editing)31 b(bu\013er)e(b)s(efore)h(editing)h(b)s(egins.)630
+2830 y Ft(-n)f Fj(nchars)66 b Ft(read)38 b Fu(returns)f(after)j
+(reading)f Fr(nc)m(hars)j Fu(c)m(haracters)e(rather)f(than)g(w)m
+(aiting)1110 2939 y(for)d(a)h(complete)h(line)f(of)g(input,)g(but)f
+(honors)g(a)h(delimiter)g(if)f(few)m(er)h(than)1110 3049
+y Fr(nc)m(hars)d Fu(c)m(haracters)e(are)e(read)h(b)s(efore)f(the)g
+(delimiter.)630 3200 y Ft(-N)g Fj(nchars)66 b Ft(read)39
+b Fu(returns)f(after)j(reading)e(exactly)j Fr(nc)m(hars)h
+Fu(c)m(haracters)f(rather)d(than)1110 3310 y(w)m(aiting)32
+b(for)f(a)g(complete)i(line)e(of)g(input,)g(unless)f(EOF)h(is)g(encoun)
+m(tered)g(or)1110 3420 y Ft(read)f Fu(times)i(out.)43
+b(Delimiter)33 b(c)m(haracters)f(encoun)m(tered)g(in)f(the)g(input)g
+(are)1110 3529 y(not)g(treated)h(sp)s(ecially)f(and)f(do)h(not)g(cause)
+g Ft(read)e Fu(to)j(return)d(un)m(til)i Fr(nc)m(hars)1110
+3639 y Fu(c)m(haracters)26 b(are)f(read.)38 b(The)24
+b(result)g(is)h(not)f(split)h(on)f(the)h(c)m(haracters)h(in)e
+Ft(IFS)p Fu(;)1110 3748 y(the)e(in)m(ten)m(t)i(is)e(that)h(the)f(v)-5
+b(ariable)23 b(is)f(assigned)g(exactly)i(the)e(c)m(haracters)i(read)
+1110 3858 y(\(with)30 b(the)h(exception)h(of)e(bac)m(kslash;)h(see)g
+(the)g Ft(-r)f Fu(option)h(b)s(elo)m(w\).)630 4009 y
+Ft(-p)f Fj(prompt)66 b Fu(Displa)m(y)38 b Fr(prompt)p
+Fu(,)g(without)e(a)h(trailing)h(newline,)h(b)s(efore)d(attempting)i(to)
+1110 4119 y(read)f(an)m(y)h(input.)60 b(The)37 b(prompt)g(is)g(displa)m
+(y)m(ed)h(only)f(if)g(input)g(is)g(coming)1110 4228 y(from)30
+b(a)h(terminal.)630 4380 y Ft(-r)384 b Fu(If)21 b(this)h(option)g(is)f
+(giv)m(en,)k(bac)m(kslash)d(do)s(es)f(not)h(act)h(as)f(an)f(escap)s(e)h
+(c)m(haracter.)1110 4489 y(The)30 b(bac)m(kslash)i(is)f(considered)g
+(to)h(b)s(e)e(part)h(of)g(the)g(line.)43 b(In)30 b(particular,)i(a)1110
+4599 y(bac)m(kslash-newline)26 b(pair)e(ma)m(y)h(not)g(then)g(b)s(e)f
+(used)g(as)h(a)g(line)g(con)m(tin)m(uation.)630 4750
+y Ft(-s)384 b Fu(Silen)m(t)28 b(mo)s(de.)40 b(If)27 b(input)f(is)i
+(coming)g(from)f(a)h(terminal,)h(c)m(haracters)g(are)f(not)1110
+4860 y(ec)m(ho)s(ed.)630 5011 y Ft(-t)i Fj(timeout)1110
+5121 y Fu(Cause)42 b Ft(read)g Fu(to)h(time)h(out)f(and)f(return)f
+(failure)i(if)g(a)g(complete)h(line)f(of)1110 5230 y(input)26
+b(\(or)h(a)g(sp)s(eci\014ed)f(n)m(um)m(b)s(er)g(of)h(c)m(haracters\))h
+(is)f(not)g(read)g(within)f Fr(time-)1110 5340 y(out)37
+b Fu(seconds.)53 b Fr(timeout)38 b Fu(ma)m(y)d(b)s(e)f(a)h(decimal)h(n)
+m(um)m(b)s(er)d(with)h(a)h(fractional)p eop end
+%%Page: 60 66
+TeXDict begin 60 65 bop 150 -116 a Fu(Chapter)30 b(4:)41
+b(Shell)30 b(Builtin)h(Commands)2069 b(60)1110 299 y(p)s(ortion)29
+b(follo)m(wing)h(the)f(decimal)h(p)s(oin)m(t.)40 b(This)29
+b(option)g(is)g(only)g(e\013ectiv)m(e)j(if)1110 408 y
+Ft(read)j Fu(is)i(reading)g(input)e(from)h(a)h(terminal,)i(pip)s(e,)e
+(or)g(other)f(sp)s(ecial)i(\014le;)1110 518 y(it)31 b(has)g(no)g
+(e\013ect)h(when)e(reading)h(from)g(regular)g(\014les.)42
+b(If)30 b Ft(read)g Fu(times)h(out,)1110 628 y Ft(read)d
+Fu(sa)m(v)m(es)j(an)m(y)f(partial)h(input)d(read)i(in)m(to)h(the)e(sp)s
+(eci\014ed)g(v)-5 b(ariable)31 b Fr(name)p Fu(.)1110
+737 y(If)k Fr(timeout)j Fu(is)e(0,)h Ft(read)e Fu(returns)f
+(immediately)-8 b(,)39 b(without)c(trying)h(to)g(read)1110
+847 y(an)m(y)c(data.)44 b(The)31 b(exit)h(status)f(is)h(0)f(if)h(input)
+e(is)h(a)m(v)-5 b(ailable)34 b(on)d(the)h(sp)s(eci\014ed)1110
+956 y(\014le)g(descriptor,)g(non-zero)h(otherwise.)46
+b(The)31 b(exit)i(status)f(is)g(greater)h(than)1110 1066
+y(128)f(if)e(the)h(timeout)g(is)f(exceeded.)630 1225
+y Ft(-u)g Fj(fd)258 b Fu(Read)31 b(input)e(from)h(\014le)g(descriptor)h
+Fr(fd)p Fu(.)630 1385 y(If)h(no)g Fr(name)5 b Fu(s)33
+b(are)f(supplied,)g(the)h(line)g(read,)g(without)f(the)h(ending)f
+(delimiter)h(but)e(oth-)630 1494 y(erwise)36 b(unmo)s(di\014ed,)e(is)i
+(assigned)f(to)h(the)g(v)-5 b(ariable)36 b Ft(REPLY)p
+Fu(.)55 b(The)34 b(exit)j(status)e(is)h(zero,)630 1604
+y(unless)i(end-of-\014le)h(is)f(encoun)m(tered,)j Ft(read)d
+Fu(times)h(out)f(\(in)h(whic)m(h)f(case)h(the)g(status)g(is)630
+1714 y(greater)31 b(than)f(128\),)i(a)e(v)-5 b(ariable)30
+b(assignmen)m(t)h(error)f(\(suc)m(h)f(as)i(assigning)f(to)h(a)f
+(readonly)630 1823 y(v)-5 b(ariable\))30 b(o)s(ccurs,)f(or)f(an)h(in)m
+(v)-5 b(alid)29 b(\014le)g(descriptor)f(is)h(supplied)e(as)i(the)g
+(argumen)m(t)g(to)g Ft(-u)p Fu(.)150 1983 y Ft(readarray)870
+2092 y(readarray)45 b([-d)i Fj(delim)p Ft(])f([-n)h Fj(count)p
+Ft(])f([-O)h Fj(origin)p Ft(])f([-s)h Fj(count)p Ft(])1061
+2202 y([-t])g([-u)f Fj(fd)p Ft(])h([-C)g Fj(callback)p
+Ft(])f([-c)g Fj(quantum)p Ft(])g([)p Fj(array)p Ft(])630
+2336 y Fu(Read)38 b(lines)f(from)g(the)h(standard)e(input)g(in)m(to)j
+(the)e(indexed)g(arra)m(y)h(v)-5 b(ariable)38 b Fr(arra)m(y)p
+Fu(,)i(or)630 2446 y(from)30 b(\014le)g(descriptor)h
+Fr(fd)i Fu(if)d(the)h Ft(-u)e Fu(option)i(is)g(supplied.)630
+2580 y(A)f(synon)m(ym)g(for)g Ft(mapfile)p Fu(.)150 2740
+y Ft(source)870 2874 y(source)46 b Fj(filename)630 3009
+y Fu(A)30 b(synon)m(ym)g(for)g Ft(.)g Fu(\(see)i(Section)f(4.1)g
+([Bourne)g(Shell)f(Builtins],)h(page)g(44\).)150 3168
+y Ft(type)870 3303 y(type)47 b([-afptP])e([)p Fj(name)i
+Ft(...)o(])630 3437 y Fu(F)-8 b(or)42 b(eac)m(h)g Fr(name)p
+Fu(,)i(indicate)e(ho)m(w)g(it)f(w)m(ould)g(b)s(e)g(in)m(terpreted)g(if)
+g(used)f(as)i(a)f(command)630 3547 y(name.)630 3681 y(If)g(the)g
+Ft(-t)g Fu(option)h(is)f(used,)j Ft(type)c Fu(prin)m(ts)h(a)h(single)g
+(w)m(ord)f(whic)m(h)g(is)g(one)h(of)g(`)p Ft(alias)p
+Fu(',)630 3791 y(`)p Ft(function)p Fu(',)32 b(`)p Ft(builtin)p
+Fu(',)g(`)p Ft(file)p Fu(')g(or)h(`)p Ft(keyword)p Fu(',)f(if)h
+Fr(name)38 b Fu(is)33 b(an)f(alias,)j(shell)e(function,)630
+3900 y(shell)i(builtin,)g(disk)g(\014le,)h(or)e(shell)h(reserv)m(ed)g
+(w)m(ord,)h(resp)s(ectiv)m(ely)-8 b(.)55 b(If)34 b(the)h
+Fr(name)40 b Fu(is)35 b(not)630 4010 y(found,)29 b(then)h(nothing)h(is)
+f(prin)m(ted,)g(and)g Ft(type)f Fu(returns)g(a)i(failure)g(status.)630
+4144 y(If)25 b(the)g Ft(-p)g Fu(option)h(is)f(used,)h
+Ft(type)e Fu(either)h(returns)g(the)g(name)g(of)h(the)f(disk)g(\014le)g
+(that)h(w)m(ould)630 4254 y(b)s(e)k(executed,)h(or)g(nothing)f(if)g
+Ft(-t)g Fu(w)m(ould)g(not)h(return)e(`)p Ft(file)p Fu('.)630
+4389 y(The)h Ft(-P)g Fu(option)h(forces)g(a)g(path)f(searc)m(h)h(for)g
+(eac)m(h)g Fr(name)p Fu(,)g(ev)m(en)g(if)g Ft(-t)f Fu(w)m(ould)g(not)h
+(return)630 4498 y(`)p Ft(file)p Fu('.)630 4633 y(If)f(a)g(command)g
+(is)g(hashed,)f Ft(-p)h Fu(and)f Ft(-P)g Fu(prin)m(t)h(the)g(hashed)f
+(v)-5 b(alue,)31 b(whic)m(h)f(is)g(not)g(neces-)630 4742
+y(sarily)h(the)f(\014le)h(that)g(app)s(ears)e(\014rst)h(in)g
+Ft($PATH)p Fu(.)630 4877 y(If)22 b(the)i Ft(-a)e Fu(option)h(is)g
+(used,)h Ft(type)e Fu(returns)f(all)j(of)f(the)g(places)h(that)f(con)m
+(tain)i(an)d(executable)630 4986 y(named)32 b Fr(\014le)p
+Fu(.)49 b(This)32 b(includes)h(aliases)h(and)e(functions,)i(if)f(and)f
+(only)h(if)g(the)g Ft(-p)f Fu(option)i(is)630 5096 y(not)d(also)g
+(used.)630 5230 y(If)f(the)g Ft(-f)g Fu(option)g(is)h(used,)e
+Ft(type)g Fu(do)s(es)h(not)h(attempt)g(to)g(\014nd)d(shell)j
+(functions,)f(as)g(with)630 5340 y(the)h Ft(command)d
+Fu(builtin.)p eop end
+%%Page: 61 67
+TeXDict begin 61 66 bop 150 -116 a Fu(Chapter)30 b(4:)41
+b(Shell)30 b(Builtin)h(Commands)2069 b(61)630 299 y(The)31
+b(return)f(status)h(is)g(zero)h(if)f(all)h(of)f(the)h
+Fr(names)i Fu(are)e(found,)e(non-zero)i(if)f(an)m(y)g(are)h(not)630
+408 y(found.)150 566 y Ft(typeset)870 700 y(typeset)46
+b([-afFgrxilnrtux])d([-p])k([)p Fj(name)p Ft([=)p Fj(value)p
+Ft(])d(...)o(])630 834 y Fu(The)31 b Ft(typeset)e Fu(command)i(is)g
+(supplied)f(for)h(compatibilit)m(y)i(with)e(the)g(Korn)f(shell.)44
+b(It)31 b(is)630 943 y(a)g(synon)m(ym)f(for)g(the)g Ft(declare)f
+Fu(builtin)h(command.)150 1101 y Ft(ulimit)870 1235 y(ulimit)46
+b([-HS])g(-a)870 1344 y(ulimit)g([-HS])g([-bcdefiklmnpqrstuvxPRT])c([)p
+Fj(limit)p Ft(])630 1478 y(ulimit)25 b Fu(pro)m(vides)h(con)m(trol)i(o)
+m(v)m(er)g(the)f(resources)f(a)m(v)-5 b(ailable)29 b(to)e(pro)s(cesses)
+f(started)h(b)m(y)g(the)630 1588 y(shell,)i(on)f(systems)g(that)h(allo)
+m(w)h(suc)m(h)e(con)m(trol.)41 b(If)28 b(an)g(option)h(is)f(giv)m(en,)i
+(it)e(is)h(in)m(terpreted)630 1697 y(as)i(follo)m(ws:)630
+1855 y Ft(-S)384 b Fu(Change)30 b(and)g(rep)s(ort)g(the)g(soft)h(limit)
+g(asso)s(ciated)h(with)e(a)h(resource.)630 2013 y Ft(-H)384
+b Fu(Change)30 b(and)g(rep)s(ort)g(the)g(hard)g(limit)h(asso)s(ciated)h
+(with)e(a)h(resource.)630 2171 y Ft(-a)384 b Fu(All)31
+b(curren)m(t)f(limits)h(are)g(rep)s(orted;)f(no)g(limits)h(are)g(set.)
+630 2328 y Ft(-b)384 b Fu(The)30 b(maxim)m(um)g(so)s(c)m(k)m(et)i
+(bu\013er)e(size.)630 2486 y Ft(-c)384 b Fu(The)30 b(maxim)m(um)g(size)
+h(of)g(core)g(\014les)f(created.)630 2644 y Ft(-d)384
+b Fu(The)30 b(maxim)m(um)g(size)h(of)g(a)g(pro)s(cess's)f(data)h
+(segmen)m(t.)630 2802 y Ft(-e)384 b Fu(The)30 b(maxim)m(um)g(sc)m
+(heduling)h(priorit)m(y)f(\()p Ft(")p Fu(nice)p Ft(")p
+Fu(\).)630 2960 y Ft(-f)384 b Fu(The)30 b(maxim)m(um)g(size)h(of)g
+(\014les)f(written)h(b)m(y)f(the)g(shell)h(and)f(its)h(c)m(hildren.)630
+3118 y Ft(-i)384 b Fu(The)30 b(maxim)m(um)g(n)m(um)m(b)s(er)f(of)i(p)s
+(ending)e(signals.)630 3275 y Ft(-k)384 b Fu(The)30 b(maxim)m(um)g(n)m
+(um)m(b)s(er)f(of)i(kqueues)f(that)h(ma)m(y)g(b)s(e)e(allo)s(cated.)630
+3433 y Ft(-l)384 b Fu(The)30 b(maxim)m(um)g(size)h(that)g(ma)m(y)g(b)s
+(e)f(lo)s(c)m(k)m(ed)i(in)m(to)f(memory)-8 b(.)630 3591
+y Ft(-m)384 b Fu(The)36 b(maxim)m(um)g(residen)m(t)h(set)g(size)g
+(\(man)m(y)g(systems)f(do)h(not)f(honor)g(this)1110 3701
+y(limit\).)630 3858 y Ft(-n)384 b Fu(The)38 b(maxim)m(um)h(n)m(um)m(b)s
+(er)e(of)i(op)s(en)f(\014le)h(descriptors)g(\(most)g(systems)g(do)1110
+3968 y(not)31 b(allo)m(w)g(this)g(v)-5 b(alue)31 b(to)g(b)s(e)e(set\).)
+630 4126 y Ft(-p)384 b Fu(The)30 b(pip)s(e)f(bu\013er)h(size.)630
+4284 y Ft(-q)384 b Fu(The)30 b(maxim)m(um)g(n)m(um)m(b)s(er)f(of)i(b)m
+(ytes)g(in)f Fm(posix)f Fu(message)j(queues.)630 4441
+y Ft(-r)384 b Fu(The)30 b(maxim)m(um)g(real-time)i(sc)m(heduling)f
+(priorit)m(y)-8 b(.)630 4599 y Ft(-s)384 b Fu(The)30
+b(maxim)m(um)g(stac)m(k)i(size.)630 4757 y Ft(-t)384
+b Fu(The)30 b(maxim)m(um)g(amoun)m(t)h(of)f(cpu)g(time)h(in)f(seconds.)
+630 4915 y Ft(-u)384 b Fu(The)30 b(maxim)m(um)g(n)m(um)m(b)s(er)f(of)i
+(pro)s(cesses)f(a)m(v)-5 b(ailable)33 b(to)e(a)f(single)i(user.)630
+5073 y Ft(-v)384 b Fu(The)41 b(maxim)m(um)h(amoun)m(t)g(of)h(virtual)f
+(memory)g(a)m(v)-5 b(ailable)44 b(to)e(the)g(shell,)1110
+5182 y(and,)30 b(on)g(some)h(systems,)g(to)g(its)g(c)m(hildren.)630
+5340 y Ft(-x)384 b Fu(The)30 b(maxim)m(um)g(n)m(um)m(b)s(er)f(of)i
+(\014le)f(lo)s(c)m(ks.)p eop end
+%%Page: 62 68
+TeXDict begin 62 67 bop 150 -116 a Fu(Chapter)30 b(4:)41
+b(Shell)30 b(Builtin)h(Commands)2069 b(62)630 299 y Ft(-P)384
+b Fu(The)30 b(maxim)m(um)g(n)m(um)m(b)s(er)f(of)i(pseudoterminals.)630
+478 y Ft(-R)384 b Fu(The)27 b(maxim)m(um)h(time)h(a)f(real-time)i(pro)s
+(cess)d(can)i(run)d(b)s(efore)i(blo)s(c)m(king,)h(in)1110
+587 y(microseconds.)630 766 y Ft(-T)384 b Fu(The)30 b(maxim)m(um)g(n)m
+(um)m(b)s(er)f(of)i(threads.)630 945 y(If)36 b Fr(limit)k
+Fu(is)c(giv)m(en,)k(and)c(the)h Ft(-a)f Fu(option)h(is)f(not)h(used,)h
+Fr(limit)h Fu(is)e(the)g(new)f(v)-5 b(alue)37 b(of)g(the)630
+1055 y(sp)s(eci\014ed)c(resource.)51 b(The)34 b(sp)s(ecial)g
+Fr(limit)j Fu(v)-5 b(alues)34 b Ft(hard)p Fu(,)g Ft(soft)p
+Fu(,)g(and)f Ft(unlimited)e Fu(stand)630 1164 y(for)h(the)g(curren)m(t)
+g(hard)f(limit,)i(the)g(curren)m(t)f(soft)g(limit,)h(and)f(no)g(limit,)
+h(resp)s(ectiv)m(ely)-8 b(.)48 b(A)630 1274 y(hard)24
+b(limit)i(cannot)g(b)s(e)e(increased)h(b)m(y)g(a)h(non-ro)s(ot)f(user)f
+(once)i(it)g(is)f(set;)j(a)d(soft)g(limit)h(ma)m(y)630
+1384 y(b)s(e)37 b(increased)h(up)e(to)j(the)f(v)-5 b(alue)38
+b(of)f(the)h(hard)f(limit.)63 b(Otherwise,)39 b(the)f(curren)m(t)f(v)-5
+b(alue)630 1493 y(of)39 b(the)g(soft)h(limit)g(for)f(the)g(sp)s
+(eci\014ed)f(resource)h(is)g(prin)m(ted,)i(unless)e(the)g
+Ft(-H)f Fu(option)i(is)630 1603 y(supplied.)47 b(When)33
+b(more)g(than)g(one)g(resource)g(is)g(sp)s(eci\014ed,)g(the)g(limit)h
+(name)f(and)f(unit,)630 1712 y(if)27 b(appropriate,)h(are)f(prin)m(ted)
+g(b)s(efore)g(the)g(v)-5 b(alue.)40 b(When)27 b(setting)h(new)e
+(limits,)j(if)e(neither)630 1822 y Ft(-H)38 b Fu(nor)g
+Ft(-S)g Fu(is)h(supplied,)h(b)s(oth)e(the)h(hard)f(and)g(soft)h(limits)
+g(are)g(set.)67 b(If)38 b(no)h(option)g(is)630 1932 y(giv)m(en,)c(then)
+f Ft(-f)e Fu(is)i(assumed.)49 b(V)-8 b(alues)35 b(are)e(in)h(1024-b)m
+(yte)i(incremen)m(ts,)f(except)f(for)f Ft(-t)p Fu(,)630
+2041 y(whic)m(h)e(is)g(in)g(seconds;)h Ft(-R)p Fu(,)g(whic)m(h)f(is)g
+(in)g(microseconds;)h Ft(-p)p Fu(,)g(whic)m(h)f(is)g(in)g(units)g(of)g
+(512-)630 2151 y(b)m(yte)k(blo)s(c)m(ks;)j Ft(-P)p Fu(,)e
+Ft(-T)p Fu(,)f Ft(-b)p Fu(,)h Ft(-k)p Fu(,)f Ft(-n)g
+Fu(and)f Ft(-u)p Fu(,)h(whic)m(h)g(are)g(unscaled)g(v)-5
+b(alues;)37 b(and,)f(when)630 2260 y(in)g Fm(posix)f
+Fu(Mo)s(de)h(\(see)g(Section)h(6.11)g([Bash)g(POSIX)d(Mo)s(de],)k(page)
+f(101\),)i Ft(-c)c Fu(and)g Ft(-f)p Fu(,)630 2370 y(whic)m(h)30
+b(are)h(in)f(512-b)m(yte)j(incremen)m(ts.)630 2514 y(The)h(return)g
+(status)h(is)f(zero)i(unless)e(an)g(in)m(v)-5 b(alid)36
+b(option)f(or)f(argumen)m(t)i(is)e(supplied,)h(or)630
+2624 y(an)30 b(error)g(o)s(ccurs)g(while)h(setting)g(a)g(new)f(limit.)
+150 2803 y Ft(unalias)870 2947 y(unalias)46 b([-a])g([)p
+Fj(name)h Ft(...)g(])630 3091 y Fu(Remo)m(v)m(e)42 b(eac)m(h)f
+Fr(name)k Fu(from)39 b(the)i(list)f(of)g(aliases.)71
+b(If)40 b Ft(-a)f Fu(is)h(supplied,)h(all)g(aliases)h(are)630
+3201 y(remo)m(v)m(ed.)g(Aliases)31 b(are)g(describ)s(ed)e(in)h(Section)
+i(6.6)f([Aliases],)h(page)f(94.)150 3471 y Fs(4.3)68
+b(Mo)t(difying)45 b(Shell)g(Beha)l(vior)150 3695 y Fk(4.3.1)63
+b(The)41 b(Set)g(Builtin)150 3842 y Fu(This)35 b(builtin)h(is)g(so)g
+(complicated)i(that)f(it)f(deserv)m(es)h(its)f(o)m(wn)g(section.)59
+b Ft(set)35 b Fu(allo)m(ws)j(y)m(ou)e(to)h(c)m(hange)150
+3951 y(the)c(v)-5 b(alues)34 b(of)f(shell)g(options)h(and)e(set)i(the)f
+(p)s(ositional)h(parameters,)h(or)e(to)h(displa)m(y)f(the)g(names)h
+(and)150 4061 y(v)-5 b(alues)31 b(of)f(shell)h(v)-5 b(ariables.)150
+4250 y Ft(set)870 4394 y(set)47 b([--abefhkmnptuvxBCEHPT])41
+b([-o)47 b Fj(option-name)p Ft(])e([)p Fj(argument)g
+Ft(...)o(])870 4504 y(set)i([+abefhkmnptuvxBCEHPT])42
+b([+o)47 b Fj(option-name)p Ft(])d([)p Fj(argument)h
+Ft(...)o(])630 4648 y Fu(If)22 b(no)h(options)g(or)g(argumen)m(ts)g
+(are)g(supplied,)g Ft(set)f Fu(displa)m(ys)g(the)h(names)g(and)f(v)-5
+b(alues)23 b(of)g(all)630 4757 y(shell)j(v)-5 b(ariables)27
+b(and)e(functions,)h(sorted)g(according)h(to)g(the)f(curren)m(t)f(lo)s
+(cale,)k(in)c(a)i(format)630 4867 y(that)i(ma)m(y)h(b)s(e)e(reused)g
+(as)h(input)f(for)h(setting)h(or)e(resetting)i(the)f(curren)m(tly-set)h
+(v)-5 b(ariables.)630 4977 y(Read-only)37 b(v)-5 b(ariables)37
+b(cannot)h(b)s(e)e(reset.)59 b(In)36 b Fm(posix)g Fu(mo)s(de,)i(only)f
+(shell)f(v)-5 b(ariables)38 b(are)630 5086 y(listed.)630
+5230 y(When)29 b(options)g(are)g(supplied,)f(they)h(set)h(or)f(unset)f
+(shell)h(attributes.)41 b(Options,)29 b(if)g(sp)s(ec-)630
+5340 y(i\014ed,)h(ha)m(v)m(e)i(the)e(follo)m(wing)i(meanings:)p
+eop end
+%%Page: 63 69
+TeXDict begin 63 68 bop 150 -116 a Fu(Chapter)30 b(4:)41
+b(Shell)30 b(Builtin)h(Commands)2069 b(63)630 299 y Ft(-a)384
+b Fu(Eac)m(h)37 b(v)-5 b(ariable)36 b(or)g(function)g(that)g(is)g
+(created)h(or)f(mo)s(di\014ed)f(is)h(giv)m(en)h(the)1110
+408 y(exp)s(ort)28 b(attribute)h(and)f(mark)m(ed)g(for)g(exp)s(ort)g
+(to)h(the)g(en)m(vironmen)m(t)f(of)h(sub-)1110 518 y(sequen)m(t)i
+(commands.)630 682 y Ft(-b)384 b Fu(Cause)44 b(the)h(status)g(of)f
+(terminated)h(bac)m(kground)g(jobs)f(to)h(b)s(e)f(rep)s(orted)1110
+792 y(immediately)-8 b(,)30 b(rather)d(than)f(b)s(efore)h(prin)m(ting)g
+(the)g(next)g(primary)g(prompt.)630 956 y Ft(-e)384 b
+Fu(Exit)65 b(immediately)g(if)f(a)h(pip)s(eline)e(\(see)i(Section)g
+(3.2.3)h([Pip)s(elines],)1110 1066 y(page)56 b(8\),)62
+b(whic)m(h)55 b(ma)m(y)h(consist)f(of)h(a)f(single)h(simple)f(command)g
+(\(see)1110 1176 y(Section)30 b(3.2.2)i([Simple)d(Commands],)g(page)h
+(8\),)h(a)f(list)g(\(see)h(Section)f(3.2.4)1110 1285
+y([Lists],)66 b(page)59 b(9\),)67 b(or)58 b(a)h(comp)s(ound)e(command)h
+(\(see)h(Section)g(3.2.5)1110 1395 y([Comp)s(ound)h(Commands],)70
+b(page)63 b(10\))g(returns)e(a)i(non-zero)f(status.)1110
+1504 y(The)41 b(shell)g(do)s(es)g(not)g(exit)h(if)f(the)h(command)f
+(that)h(fails)f(is)g(part)g(of)h(the)1110 1614 y(command)g(list)h
+(immediately)g(follo)m(wing)g(a)g Ft(while)e Fu(or)h
+Ft(until)e Fu(k)m(eyw)m(ord,)1110 1724 y(part)61 b(of)g(the)g(test)h
+(in)e(an)h Ft(if)f Fu(statemen)m(t,)71 b(part)61 b(of)g(an)m(y)g
+(command)1110 1833 y(executed)50 b(in)e(a)h Ft(&&)f Fu(or)h
+Ft(||)f Fu(list)h(except)g(the)g(command)g(follo)m(wing)h(the)1110
+1943 y(\014nal)37 b Ft(&&)g Fu(or)g Ft(||)p Fu(,)h(an)m(y)g(command)f
+(in)g(a)g(pip)s(eline)g(but)g(the)g(last,)j(or)e(if)f(the)1110
+2052 y(command's)c(return)f(status)h(is)g(b)s(eing)g(in)m(v)m(erted)h
+(with)e Ft(!)p Fu(.)48 b(If)33 b(a)g(comp)s(ound)1110
+2162 y(command)g(other)g(than)f(a)i(subshell)d(returns)h(a)h(non-zero)h
+(status)f(b)s(ecause)1110 2271 y(a)k(command)g(failed)g(while)g
+Ft(-e)f Fu(w)m(as)i(b)s(eing)e(ignored,)j(the)e(shell)g(do)s(es)g(not)
+1110 2381 y(exit.)42 b(A)30 b(trap)g(on)h Ft(ERR)p Fu(,)e(if)i(set,)g
+(is)f(executed)i(b)s(efore)e(the)g(shell)h(exits.)1110
+2518 y(This)f(option)h(applies)f(to)h(the)g(shell)g(en)m(vironmen)m(t)g
+(and)f(eac)m(h)h(subshell)f(en-)1110 2628 y(vironmen)m(t)j(separately)i
+(\(see)f(Section)g(3.7.3)h([Command)d(Execution)i(En-)1110
+2737 y(vironmen)m(t],)i(page)f(40\),)i(and)d(ma)m(y)h(cause)f
+(subshells)g(to)h(exit)g(b)s(efore)f(exe-)1110 2847 y(cuting)d(all)g
+(the)g(commands)f(in)g(the)g(subshell.)1110 2984 y(If)41
+b(a)g(comp)s(ound)e(command)i(or)g(shell)g(function)g(executes)h(in)f
+(a)g(con)m(text)1110 3093 y(where)31 b Ft(-e)g Fu(is)g(b)s(eing)g
+(ignored,)h(none)f(of)h(the)f(commands)g(executed)h(within)1110
+3203 y(the)j(comp)s(ound)f(command)h(or)g(function)f(b)s(o)s(dy)g(will)
+h(b)s(e)f(a\013ected)j(b)m(y)e(the)1110 3313 y Ft(-e)25
+b Fu(setting,)j(ev)m(en)e(if)g Ft(-e)f Fu(is)h(set)g(and)f(a)h(command)
+g(returns)e(a)i(failure)g(status.)1110 3422 y(If)32 b(a)i(comp)s(ound)d
+(command)i(or)g(shell)g(function)f(sets)i Ft(-e)e Fu(while)h(executing)
+1110 3532 y(in)40 b(a)h(con)m(text)i(where)d Ft(-e)g
+Fu(is)h(ignored,)j(that)d(setting)h(will)f(not)g(ha)m(v)m(e)h(an)m(y)
+1110 3641 y(e\013ect)g(un)m(til)e(the)h(comp)s(ound)e(command)h(or)g
+(the)g(command)g(con)m(taining)1110 3751 y(the)31 b(function)f(call)h
+(completes.)630 3915 y Ft(-f)384 b Fu(Disable)31 b(\014lename)g
+(expansion)f(\(globbing\).)630 4080 y Ft(-h)384 b Fu(Lo)s(cate)33
+b(and)e(remem)m(b)s(er)h(\(hash\))g(commands)f(as)h(they)g(are)g(lo)s
+(ok)m(ed)h(up)e(for)1110 4189 y(execution.)42 b(This)29
+b(option)i(is)g(enabled)f(b)m(y)g(default.)630 4354 y
+Ft(-k)384 b Fu(All)34 b(argumen)m(ts)g(in)f(the)h(form)f(of)g
+(assignmen)m(t)h(statemen)m(ts)i(are)d(placed)h(in)1110
+4463 y(the)k(en)m(vironmen)m(t)g(for)g(a)g(command,)h(not)f(just)f
+(those)i(that)f(precede)g(the)1110 4573 y(command)30
+b(name.)630 4737 y Ft(-m)384 b Fu(Job)28 b(con)m(trol)h(is)f(enabled)g
+(\(see)h(Chapter)f(7)g([Job)g(Con)m(trol],)i(page)f(107\).)41
+b(All)1110 4847 y(pro)s(cesses)27 b(run)f(in)i(a)g(separate)g(pro)s
+(cess)f(group.)40 b(When)27 b(a)h(bac)m(kground)f(job)1110
+4956 y(completes,)32 b(the)f(shell)f(prin)m(ts)g(a)h(line)f(con)m
+(taining)i(its)f(exit)g(status.)630 5121 y Ft(-n)384
+b Fu(Read)38 b(commands)f(but)f(do)i(not)f(execute)i(them.)62
+b(This)37 b(ma)m(y)h(b)s(e)f(used)f(to)1110 5230 y(c)m(hec)m(k)d(a)e
+(script)g(for)g(syn)m(tax)h(errors.)42 b(This)30 b(option)i(is)f
+(ignored)g(b)m(y)g(in)m(terac-)1110 5340 y(tiv)m(e)h(shells.)p
+eop end
+%%Page: 64 70
+TeXDict begin 64 69 bop 150 -116 a Fu(Chapter)30 b(4:)41
+b(Shell)30 b(Builtin)h(Commands)2069 b(64)630 299 y Ft(-o)30
+b Fj(option-name)1110 408 y Fu(Set)h(the)f(option)h(corresp)s(onding)e
+(to)i Fr(option-name)5 b Fu(:)1110 575 y Ft(allexport)1590
+685 y Fu(Same)30 b(as)h Ft(-a)p Fu(.)1110 852 y Ft(braceexpand)1590
+962 y Fu(Same)f(as)h Ft(-B)p Fu(.)1110 1129 y Ft(emacs)240
+b Fu(Use)25 b(an)f Ft(emacs)p Fu(-st)m(yle)h(line)f(editing)h(in)m
+(terface)h(\(see)g(Chapter)e(8)1590 1238 y([Command)33
+b(Line)g(Editing],)h(page)h(111\).)51 b(This)32 b(also)i(a\013ects)1590
+1348 y(the)d(editing)g(in)m(terface)h(used)d(for)h Ft(read)f(-e)p
+Fu(.)1110 1515 y Ft(errexit)144 b Fu(Same)30 b(as)h Ft(-e)p
+Fu(.)1110 1682 y Ft(errtrace)96 b Fu(Same)30 b(as)h Ft(-E)p
+Fu(.)1110 1849 y Ft(functrace)1590 1958 y Fu(Same)f(as)h
+Ft(-T)p Fu(.)1110 2125 y Ft(hashall)144 b Fu(Same)30
+b(as)h Ft(-h)p Fu(.)1110 2292 y Ft(histexpand)1590 2402
+y Fu(Same)f(as)h Ft(-H)p Fu(.)1110 2569 y Ft(history)144
+b Fu(Enable)39 b(command)g(history)-8 b(,)42 b(as)d(describ)s(ed)f(in)h
+(Section)h(9.1)1590 2679 y([Bash)d(History)g(F)-8 b(acilities],)41
+b(page)c(146.)60 b(This)36 b(option)h(is)f(on)1590 2788
+y(b)m(y)30 b(default)h(in)f(in)m(teractiv)m(e)j(shells.)1110
+2955 y Ft(ignoreeof)1590 3065 y Fu(An)d(in)m(teractiv)m(e)j(shell)e
+(will)g(not)f(exit)h(up)s(on)e(reading)i(EOF.)1110 3232
+y Ft(keyword)144 b Fu(Same)30 b(as)h Ft(-k)p Fu(.)1110
+3399 y Ft(monitor)144 b Fu(Same)30 b(as)h Ft(-m)p Fu(.)1110
+3566 y Ft(noclobber)1590 3675 y Fu(Same)f(as)h Ft(-C)p
+Fu(.)1110 3842 y Ft(noexec)192 b Fu(Same)30 b(as)h Ft(-n)p
+Fu(.)1110 4009 y Ft(noglob)192 b Fu(Same)30 b(as)h Ft(-f)p
+Fu(.)1110 4176 y Ft(nolog)240 b Fu(Curren)m(tly)30 b(ignored.)1110
+4343 y Ft(notify)192 b Fu(Same)30 b(as)h Ft(-b)p Fu(.)1110
+4510 y Ft(nounset)144 b Fu(Same)30 b(as)h Ft(-u)p Fu(.)1110
+4677 y Ft(onecmd)192 b Fu(Same)30 b(as)h Ft(-t)p Fu(.)1110
+4844 y Ft(physical)96 b Fu(Same)30 b(as)h Ft(-P)p Fu(.)1110
+5011 y Ft(pipefail)96 b Fu(If)44 b(set,)k(the)d(return)e(v)-5
+b(alue)45 b(of)f(a)h(pip)s(eline)e(is)i(the)f(v)-5 b(alue)45
+b(of)1590 5121 y(the)33 b(last)h(\(righ)m(tmost\))h(command)e(to)h
+(exit)g(with)f(a)g(non-zero)1590 5230 y(status,)28 b(or)f(zero)g(if)f
+(all)i(commands)e(in)g(the)h(pip)s(eline)f(exit)i(suc-)1590
+5340 y(cessfully)-8 b(.)41 b(This)30 b(option)h(is)f(disabled)g(b)m(y)h
+(default.)p eop end
+%%Page: 65 71
+TeXDict begin 65 70 bop 150 -116 a Fu(Chapter)30 b(4:)41
+b(Shell)30 b(Builtin)h(Commands)2069 b(65)1110 299 y
+Ft(posix)240 b Fu(Change)30 b(the)g(b)s(eha)m(vior)h(of)f(Bash)g(where)
+g(the)g(default)h(op)s(era-)1590 408 y(tion)25 b(di\013ers)f(from)g
+(the)h Fm(posix)f Fu(standard)f(to)i(matc)m(h)h(the)f(stan-)1590
+518 y(dard)h(\(see)j(Section)f(6.11)h([Bash)f(POSIX)e(Mo)s(de],)j(page)
+f(101\).)1590 628 y(This)37 b(is)g(in)m(tended)g(to)h(mak)m(e)g(Bash)g
+(b)s(eha)m(v)m(e)g(as)g(a)f(strict)h(su-)1590 737 y(p)s(erset)30
+b(of)h(that)f(standard.)1110 911 y Ft(privileged)1590
+1020 y Fu(Same)g(as)h Ft(-p)p Fu(.)1110 1194 y Ft(verbose)144
+b Fu(Same)30 b(as)h Ft(-v)p Fu(.)1110 1367 y Ft(vi)384
+b Fu(Use)36 b(a)g Ft(vi)p Fu(-st)m(yle)g(line)g(editing)g(in)m
+(terface.)58 b(This)35 b(also)h(a\013ects)1590 1477 y(the)31
+b(editing)g(in)m(terface)h(used)d(for)h Ft(read)f(-e)p
+Fu(.)1110 1650 y Ft(xtrace)192 b Fu(Same)30 b(as)h Ft(-x)p
+Fu(.)630 1824 y Ft(-p)384 b Fu(T)-8 b(urn)33 b(on)h(privileged)h(mo)s
+(de.)51 b(In)34 b(this)g(mo)s(de,)h(the)f Ft($BASH_ENV)e
+Fu(and)h Ft($ENV)1110 1934 y Fu(\014les)23 b(are)h(not)f(pro)s(cessed,)
+h(shell)g(functions)e(are)i(not)f(inherited)g(from)f(the)i(en-)1110
+2043 y(vironmen)m(t,)h(and)e(the)g Ft(SHELLOPTS)p Fu(,)f
+Ft(BASHOPTS)p Fu(,)h Ft(CDPATH)e Fu(and)i Ft(GLOBIGNORE)1110
+2153 y Fu(v)-5 b(ariables,)23 b(if)e(they)g(app)s(ear)f(in)g(the)h(en)m
+(vironmen)m(t,)i(are)e(ignored.)38 b(If)20 b(the)h(shell)1110
+2262 y(is)37 b(started)h(with)f(the)g(e\013ectiv)m(e)j(user)d
+(\(group\))g(id)g(not)g(equal)h(to)g(the)f(real)1110
+2372 y(user)h(\(group\))h(id,)i(and)d(the)h Ft(-p)f Fu(option)i(is)e
+(not)i(supplied,)f(these)h(actions)1110 2482 y(are)32
+b(tak)m(en)i(and)d(the)h(e\013ectiv)m(e)j(user)c(id)h(is)g(set)h(to)f
+(the)h(real)f(user)g(id.)45 b(If)32 b(the)1110 2591 y
+Ft(-p)i Fu(option)h(is)g(supplied)f(at)h(startup,)h(the)f(e\013ectiv)m
+(e)i(user)d(id)g(is)h(not)g(reset.)1110 2701 y(T)-8 b(urning)35
+b(this)i(option)g(o\013)g(causes)g(the)g(e\013ectiv)m(e)i(user)d(and)g
+(group)g(ids)g(to)1110 2810 y(b)s(e)30 b(set)h(to)g(the)f(real)h(user)f
+(and)g(group)g(ids.)630 2984 y Ft(-t)384 b Fu(Exit)31
+b(after)g(reading)f(and)g(executing)h(one)g(command.)630
+3157 y Ft(-u)384 b Fu(T)-8 b(reat)25 b(unset)e(v)-5 b(ariables)25
+b(and)e(parameters)h(other)h(than)e(the)h(sp)s(ecial)h(param-)1110
+3267 y(eters)35 b(`)p Ft(@)p Fu(')f(or)g(`)p Ft(*)p Fu(')h(as)f(an)g
+(error)g(when)f(p)s(erforming)g(parameter)i(expansion.)1110
+3377 y(An)28 b(error)h(message)g(will)g(b)s(e)f(written)h(to)h(the)e
+(standard)g(error,)h(and)f(a)h(non-)1110 3486 y(in)m(teractiv)m(e)k
+(shell)e(will)g(exit.)630 3660 y Ft(-v)384 b Fu(Prin)m(t)30
+b(shell)h(input)e(lines)i(as)g(they)f(are)h(read.)630
+3833 y Ft(-x)384 b Fu(Prin)m(t)21 b(a)h(trace)h(of)f(simple)f
+(commands,)i Ft(for)e Fu(commands,)i Ft(case)d Fu(commands,)1110
+3943 y Ft(select)29 b Fu(commands,)j(and)e(arithmetic)j
+Ft(for)d Fu(commands)h(and)f(their)i(argu-)1110 4052
+y(men)m(ts)h(or)f(asso)s(ciated)i(w)m(ord)e(lists)h(after)g(they)f(are)
+h(expanded)f(and)f(b)s(efore)1110 4162 y(they)i(are)g(executed.)49
+b(The)32 b(v)-5 b(alue)33 b(of)g(the)g Ft(PS4)f Fu(v)-5
+b(ariable)34 b(is)f(expanded)f(and)1110 4271 y(the)24
+b(resultan)m(t)h(v)-5 b(alue)24 b(is)g(prin)m(ted)g(b)s(efore)f(the)h
+(command)g(and)f(its)i(expanded)1110 4381 y(argumen)m(ts.)630
+4555 y Ft(-B)384 b Fu(The)41 b(shell)g(will)g(p)s(erform)f(brace)h
+(expansion)g(\(see)h(Section)g(3.5.1)g([Brace)1110 4664
+y(Expansion],)30 b(page)h(23\).)42 b(This)30 b(option)h(is)f(on)g(b)m
+(y)h(default.)630 4838 y Ft(-C)384 b Fu(Prev)m(en)m(t)25
+b(output)e(redirection)h(using)f(`)p Ft(>)p Fu(',)i(`)p
+Ft(>&)p Fu(',)g(and)e(`)p Ft(<>)p Fu(')g(from)h(o)m(v)m(erwriting)1110
+4947 y(existing)31 b(\014les.)630 5121 y Ft(-E)384 b
+Fu(If)39 b(set,)j(an)m(y)e(trap)f(on)g Ft(ERR)g Fu(is)g(inherited)g(b)m
+(y)g(shell)h(functions,)h(command)1110 5230 y(substitutions,)35
+b(and)e(commands)g(executed)i(in)f(a)g(subshell)f(en)m(vironmen)m(t.)
+1110 5340 y(The)d Ft(ERR)f Fu(trap)i(is)f(normally)h(not)f(inherited)g
+(in)g(suc)m(h)g(cases.)p eop end
+%%Page: 66 72
+TeXDict begin 66 71 bop 150 -116 a Fu(Chapter)30 b(4:)41
+b(Shell)30 b(Builtin)h(Commands)2069 b(66)630 299 y Ft(-H)384
+b Fu(Enable)38 b(`)p Ft(!)p Fu(')h(st)m(yle)h(history)e(substitution)g
+(\(see)h(Section)h(9.3)f([History)g(In-)1110 408 y(teraction],)g(page)d
+(148\).)57 b(This)34 b(option)i(is)f(on)g(b)m(y)h(default)f(for)g(in)m
+(teractiv)m(e)1110 518 y(shells.)630 670 y Ft(-P)384
+b Fu(If)39 b(set,)j(do)d(not)g(resolv)m(e)i(sym)m(b)s(olic)e(links)g
+(when)f(p)s(erforming)g(commands)1110 780 y(suc)m(h)29
+b(as)h Ft(cd)f Fu(whic)m(h)g(c)m(hange)h(the)g(curren)m(t)f(directory)
+-8 b(.)42 b(The)28 b(ph)m(ysical)j(direc-)1110 890 y(tory)j(is)g(used)f
+(instead.)52 b(By)34 b(default,)h(Bash)f(follo)m(ws)h(the)f(logical)i
+(c)m(hain)f(of)1110 999 y(directories)j(when)d(p)s(erforming)h
+(commands)g(whic)m(h)g(c)m(hange)i(the)f(curren)m(t)1110
+1109 y(directory)-8 b(.)1110 1240 y(F)g(or)42 b(example,)i(if)d
+Ft(/usr/sys)e Fu(is)i(a)g(sym)m(b)s(olic)g(link)g(to)h
+Ft(/usr/local/sys)1110 1349 y Fu(then:)1350 1480 y Ft($)47
+b(cd)h(/usr/sys;)d(echo)i($PWD)1350 1590 y(/usr/sys)1350
+1700 y($)g(cd)h(..;)f(pwd)1350 1809 y(/usr)1110 1940
+y Fu(If)30 b Ft(set)f(-P)h Fu(is)h(on,)f(then:)1350 2071
+y Ft($)47 b(cd)h(/usr/sys;)d(echo)i($PWD)1350 2181 y(/usr/local/sys)
+1350 2290 y($)g(cd)h(..;)f(pwd)1350 2400 y(/usr/local)630
+2552 y(-T)384 b Fu(If)34 b(set,)j(an)m(y)e(trap)g(on)g
+Ft(DEBUG)e Fu(and)i Ft(RETURN)e Fu(are)i(inherited)g(b)m(y)f(shell)i
+(func-)1110 2662 y(tions,)k(command)d(substitutions,)h(and)f(commands)g
+(executed)h(in)f(a)h(sub-)1110 2771 y(shell)33 b(en)m(vironmen)m(t.)49
+b(The)32 b Ft(DEBUG)g Fu(and)g Ft(RETURN)f Fu(traps)h(are)i(normally)f
+(not)1110 2881 y(inherited)d(in)g(suc)m(h)g(cases.)630
+3033 y Ft(--)384 b Fu(If)44 b(no)g(argumen)m(ts)g(follo)m(w)i(this)e
+(option,)k(then)c(the)h(p)s(ositional)g(parame-)1110
+3143 y(ters)31 b(are)g(unset.)40 b(Otherwise,)31 b(the)f(p)s(ositional)
+i(parameters)f(are)f(set)h(to)h(the)1110 3253 y Fr(argumen)m(ts)p
+Fu(,)f(ev)m(en)g(if)f(some)h(of)g(them)f(b)s(egin)g(with)g(a)h(`)p
+Ft(-)p Fu('.)630 3405 y Ft(-)432 b Fu(Signal)45 b(the)g(end)f(of)h
+(options,)k(cause)c(all)h(remaining)e Fr(argumen)m(ts)49
+b Fu(to)d(b)s(e)1110 3515 y(assigned)33 b(to)h(the)g(p)s(ositional)g
+(parameters.)49 b(The)33 b Ft(-x)g Fu(and)f Ft(-v)h Fu(options)h(are)
+1110 3624 y(turned)k(o\013.)68 b(If)38 b(there)i(are)f(no)g(argumen)m
+(ts,)j(the)e(p)s(ositional)g(parameters)1110 3734 y(remain)30
+b(unc)m(hanged.)630 3886 y(Using)d(`)p Ft(+)p Fu(')h(rather)f(than)g(`)
+p Ft(-)p Fu(')g(causes)h(these)f(options)h(to)g(b)s(e)e(turned)g
+(o\013.)40 b(The)27 b(options)h(can)630 3996 y(also)36
+b(b)s(e)f(used)f(up)s(on)g(in)m(v)m(o)s(cation)j(of)e(the)g(shell.)56
+b(The)34 b(curren)m(t)h(set)h(of)f(options)h(ma)m(y)g(b)s(e)630
+4105 y(found)29 b(in)h Ft($-)p Fu(.)630 4236 y(The)43
+b(remaining)h(N)f Fr(argumen)m(ts)48 b Fu(are)c(p)s(ositional)g
+(parameters)g(and)f(are)h(assigned,)j(in)630 4346 y(order,)30
+b(to)h Ft($1)p Fu(,)f Ft($2)p Fu(,)36 b(.)22 b(.)g(.)42
+b Ft($N)p Fu(.)e(The)30 b(sp)s(ecial)h(parameter)g Ft(#)f
+Fu(is)g(set)h(to)g(N.)630 4477 y(The)f(return)f(status)i(is)f(alw)m(a)m
+(ys)i(zero)f(unless)f(an)g(in)m(v)-5 b(alid)31 b(option)g(is)f
+(supplied.)150 4669 y Fk(4.3.2)63 b(The)41 b(Shopt)h(Builtin)150
+4816 y Fu(This)30 b(builtin)g(allo)m(ws)h(y)m(ou)g(to)g(c)m(hange)h
+(additional)f(shell)f(optional)i(b)s(eha)m(vior.)150
+4968 y Ft(shopt)870 5099 y(shopt)46 b([-pqsu])g([-o])h([)p
+Fj(optname)e Ft(...])630 5230 y Fu(T)-8 b(oggle)37 b(the)e(v)-5
+b(alues)35 b(of)g(settings)h(con)m(trolling)g(optional)g(shell)f(b)s
+(eha)m(vior.)55 b(The)34 b(settings)630 5340 y(can)24
+b(b)s(e)g(either)h(those)f(listed)h(b)s(elo)m(w,)h(or,)f(if)g(the)f
+Ft(-o)f Fu(option)i(is)f(used,)h(those)g(a)m(v)-5 b(ailable)26
+b(with)p eop end
+%%Page: 67 73
+TeXDict begin 67 72 bop 150 -116 a Fu(Chapter)30 b(4:)41
+b(Shell)30 b(Builtin)h(Commands)2069 b(67)630 299 y(the)30
+b Ft(-o)f Fu(option)i(to)f(the)g Ft(set)f Fu(builtin)h(command)f(\(see)
+i(Section)g(4.3.1)g([The)f(Set)g(Builtin],)630 408 y(page)i(62\).)45
+b(With)32 b(no)f(options,)h(or)g(with)f(the)g Ft(-p)g
+Fu(option,)h(a)g(list)g(of)f(all)i(settable)g(options)630
+518 y(is)g(displa)m(y)m(ed,)i(with)e(an)g(indication)h(of)g(whether)e
+(or)h(not)h(eac)m(h)g(is)g(set;)h(if)e Fr(optnames)38
+b Fu(are)630 628 y(supplied,)25 b(the)g(output)g(is)g(restricted)g(to)h
+(those)g(options.)39 b(The)24 b Ft(-p)h Fu(option)g(causes)g(output)630
+737 y(to)30 b(b)s(e)f(displa)m(y)m(ed)g(in)g(a)h(form)f(that)g(ma)m(y)h
+(b)s(e)f(reused)f(as)i(input.)39 b(Other)29 b(options)g(ha)m(v)m(e)i
+(the)630 847 y(follo)m(wing)h(meanings:)630 1004 y Ft(-s)384
+b Fu(Enable)30 b(\(set\))i(eac)m(h)f Fr(optname)p Fu(.)630
+1161 y Ft(-u)384 b Fu(Disable)31 b(\(unset\))g(eac)m(h)h
+Fr(optname)p Fu(.)630 1319 y Ft(-q)384 b Fu(Suppresses)28
+b(normal)h(output;)h(the)g(return)e(status)i(indicates)h(whether)e(the)
+1110 1428 y Fr(optname)37 b Fu(is)31 b(set)h(or)f(unset.)43
+b(If)31 b(m)m(ultiple)h Fr(optname)37 b Fu(argumen)m(ts)31
+b(are)h(giv)m(en)1110 1538 y(with)d Ft(-q)p Fu(,)g(the)g(return)f
+(status)h(is)g(zero)h(if)f(all)h Fr(optnames)j Fu(are)d(enabled;)f
+(non-)1110 1647 y(zero)i(otherwise.)630 1805 y Ft(-o)384
+b Fu(Restricts)22 b(the)f(v)-5 b(alues)22 b(of)f Fr(optname)27
+b Fu(to)22 b(b)s(e)e(those)i(de\014ned)e(for)h(the)g
+Ft(-o)f Fu(option)1110 1914 y(to)31 b(the)g Ft(set)e
+Fu(builtin)h(\(see)h(Section)h(4.3.1)g([The)e(Set)g(Builtin],)i(page)f
+(62\).)630 2071 y(If)e(either)i Ft(-s)e Fu(or)h Ft(-u)f
+Fu(is)h(used)f(with)g(no)h Fr(optname)35 b Fu(argumen)m(ts,)c
+Ft(shopt)d Fu(sho)m(ws)h(only)h(those)630 2181 y(options)h(whic)m(h)f
+(are)h(set)f(or)h(unset,)f(resp)s(ectiv)m(ely)-8 b(.)630
+2314 y(Unless)30 b(otherwise)h(noted,)g(the)g Ft(shopt)d
+Fu(options)j(are)g(disabled)f(\(o\013)7 b(\))32 b(b)m(y)e(default.)630
+2448 y(The)d(return)f(status)i(when)f(listing)h(options)g(is)f(zero)i
+(if)e(all)i Fr(optnames)i Fu(are)d(enabled,)g(non-)630
+2557 y(zero)40 b(otherwise.)66 b(When)39 b(setting)h(or)f(unsetting)g
+(options,)i(the)e(return)f(status)h(is)g(zero)630 2667
+y(unless)30 b(an)g Fr(optname)36 b Fu(is)30 b(not)h(a)g(v)-5
+b(alid)30 b(shell)h(option.)630 2800 y(The)f(list)h(of)f
+Ft(shopt)f Fu(options)i(is:)630 2958 y Ft(assoc_expand_once)1110
+3067 y Fu(If)h(set,)i(the)e(shell)h(suppresses)e(m)m(ultiple)i(ev)-5
+b(aluation)34 b(of)e(asso)s(ciativ)m(e)j(arra)m(y)1110
+3177 y(subscripts)24 b(during)h(arithmetic)h(expression)g(ev)-5
+b(aluation,)28 b(while)e(executing)1110 3286 y(builtins)c(that)i(can)f
+(p)s(erform)f(v)-5 b(ariable)24 b(assignmen)m(ts,)h(and)e(while)g
+(executing)1110 3396 y(builtins)30 b(that)h(p)s(erform)e(arra)m(y)i
+(dereferencing.)630 3553 y Ft(autocd)192 b Fu(If)27 b(set,)h(a)g
+(command)f(name)g(that)h(is)f(the)g(name)g(of)h(a)f(directory)h(is)f
+(executed)1110 3663 y(as)j(if)f(it)h(w)m(ere)f(the)h(argumen)m(t)g(to)g
+(the)f Ft(cd)g Fu(command.)40 b(This)29 b(option)g(is)h(only)1110
+3772 y(used)g(b)m(y)g(in)m(teractiv)m(e)j(shells.)630
+3930 y Ft(cdable_vars)1110 4039 y Fu(If)h(this)h(is)g(set,)i(an)e
+(argumen)m(t)g(to)h(the)f Ft(cd)f Fu(builtin)h(command)f(that)i(is)f
+(not)1110 4149 y(a)c(directory)g(is)g(assumed)f(to)h(b)s(e)f(the)h
+(name)f(of)h(a)g(v)-5 b(ariable)31 b(whose)g(v)-5 b(alue)31
+b(is)1110 4258 y(the)g(directory)f(to)i(c)m(hange)f(to.)630
+4416 y Ft(cdspell)144 b Fu(If)27 b(set,)h(minor)f(errors)f(in)h(the)g
+(sp)s(elling)h(of)f(a)g(directory)h(comp)s(onen)m(t)f(in)g(a)h
+Ft(cd)1110 4525 y Fu(command)i(will)h(b)s(e)f(corrected.)43
+b(The)30 b(errors)g(c)m(hec)m(k)m(ed)j(for)d(are)h(transp)s(osed)1110
+4635 y(c)m(haracters,)46 b(a)c(missing)f(c)m(haracter,)47
+b(and)40 b(a)i(c)m(haracter)h(to)s(o)g(man)m(y)-8 b(.)74
+b(If)42 b(a)1110 4744 y(correction)25 b(is)e(found,)g(the)h(corrected)g
+(path)f(is)g(prin)m(ted,)h(and)f(the)g(command)1110 4854
+y(pro)s(ceeds.)40 b(This)30 b(option)h(is)f(only)h(used)e(b)m(y)h(in)m
+(teractiv)m(e)k(shells.)630 5011 y Ft(checkhash)1110
+5121 y Fu(If)29 b(this)h(is)g(set,)g(Bash)g(c)m(hec)m(ks)h(that)g(a)f
+(command)f(found)g(in)g(the)h(hash)f(table)1110 5230
+y(exists)k(b)s(efore)f(trying)h(to)h(execute)g(it.)48
+b(If)32 b(a)h(hashed)e(command)i(no)f(longer)1110 5340
+y(exists,)f(a)g(normal)f(path)g(searc)m(h)h(is)g(p)s(erformed.)p
+eop end
+%%Page: 68 74
+TeXDict begin 68 73 bop 150 -116 a Fu(Chapter)30 b(4:)41
+b(Shell)30 b(Builtin)h(Commands)2069 b(68)630 299 y Ft(checkjobs)1110
+408 y Fu(If)28 b(set,)i(Bash)e(lists)h(the)g(status)g(of)f(an)m(y)h
+(stopp)s(ed)f(and)g(running)e(jobs)i(b)s(efore)1110 518
+y(exiting)42 b(an)f(in)m(teractiv)m(e)j(shell.)72 b(If)41
+b(an)m(y)g(jobs)f(are)i(running,)g(this)f(causes)1110
+628 y(the)30 b(exit)g(to)g(b)s(e)f(deferred)g(un)m(til)h(a)f(second)h
+(exit)g(is)g(attempted)h(without)e(an)1110 737 y(in)m(terv)m(ening)d
+(command)f(\(see)h(Chapter)e(7)h([Job)g(Con)m(trol],)i(page)f(107\).)40
+b(The)1110 847 y(shell)31 b(alw)m(a)m(ys)g(p)s(ostp)s(ones)f(exiting)h
+(if)g(an)m(y)f(jobs)g(are)h(stopp)s(ed.)630 1029 y Ft(checkwinsize)1110
+1139 y Fu(If)23 b(set,)j(Bash)e(c)m(hec)m(ks)h(the)f(windo)m(w)f(size)h
+(after)h(eac)m(h)f(external)h(\(non-builtin\))1110 1249
+y(command)55 b(and,)60 b(if)55 b(necessary)-8 b(,)62
+b(up)s(dates)54 b(the)h(v)-5 b(alues)55 b(of)g Ft(LINES)f
+Fu(and)1110 1358 y Ft(COLUMNS)p Fu(.)39 b(This)29 b(option)i(is)g
+(enabled)f(b)m(y)g(default.)630 1541 y Ft(cmdhist)144
+b Fu(If)33 b(set,)j(Bash)e(attempts)h(to)g(sa)m(v)m(e)g(all)g(lines)f
+(of)g(a)h(m)m(ultiple-line)g(command)1110 1650 y(in)c(the)g(same)g
+(history)g(en)m(try)-8 b(.)42 b(This)30 b(allo)m(ws)i(easy)g
+(re-editing)g(of)f(m)m(ulti-line)1110 1760 y(commands.)79
+b(This)43 b(option)g(is)h(enabled)f(b)m(y)g(default,)k(but)c(only)g
+(has)g(an)1110 1870 y(e\013ect)30 b(if)e(command)g(history)g(is)h
+(enabled)f(\(see)h(Section)g(9.1)h([Bash)e(History)1110
+1979 y(F)-8 b(acilities],)34 b(page)d(146\).)630 2162
+y Ft(compat31)630 2271 y(compat32)630 2381 y(compat40)630
+2491 y(compat41)630 2600 y(compat42)630 2710 y(compat43)630
+2819 y(compat44)96 b Fu(These)39 b(con)m(trol)i(asp)s(ects)f(of)f(the)h
+(shell's)g(compatibilit)m(y)h(mo)s(de)e(\(see)h(Sec-)1110
+2929 y(tion)31 b(6.12)h([Shell)e(Compatibilit)m(y)i(Mo)s(de],)f(page)g
+(104\).)630 3112 y Ft(complete_fullquote)1110 3221 y
+Fu(If)g(set,)g(Bash)h(quotes)f(all)h(shell)f(metac)m(haracters)i(in)e
+(\014lenames)g(and)g(direc-)1110 3331 y(tory)g(names)f(when)g(p)s
+(erforming)f(completion.)43 b(If)30 b(not)h(set,)g(Bash)g(remo)m(v)m
+(es)1110 3440 y(metac)m(haracters)40 b(suc)m(h)d(as)h(the)g(dollar)g
+(sign)g(from)f(the)h(set)g(of)f(c)m(haracters)1110 3550
+y(that)f(will)g(b)s(e)f(quoted)g(in)g(completed)i(\014lenames)e(when)f
+(these)i(metac)m(har-)1110 3660 y(acters)29 b(app)s(ear)e(in)g(shell)h
+(v)-5 b(ariable)28 b(references)g(in)f(w)m(ords)g(to)i(b)s(e)e
+(completed.)1110 3769 y(This)k(means)i(that)g(dollar)f(signs)g(in)g(v)
+-5 b(ariable)33 b(names)g(that)f(expand)g(to)h(di-)1110
+3879 y(rectories)28 b(will)g(not)f(b)s(e)f(quoted;)j(ho)m(w)m(ev)m(er,)
+g(an)m(y)e(dollar)h(signs)f(app)s(earing)f(in)1110 3988
+y(\014lenames)j(will)h(not)f(b)s(e)g(quoted,)h(either.)41
+b(This)28 b(is)i(activ)m(e)h(only)e(when)g(bash)1110
+4098 y(is)39 b(using)f(bac)m(kslashes)i(to)g(quote)g(completed)f
+(\014lenames.)67 b(This)38 b(v)-5 b(ariable)1110 4208
+y(is)41 b(set)g(b)m(y)g(default,)j(whic)m(h)c(is)h(the)g(default)g
+(Bash)g(b)s(eha)m(vior)g(in)g(v)m(ersions)1110 4317 y(through)30
+b(4.2.)630 4500 y Ft(direxpand)1110 4609 y Fu(If)k(set,)i(Bash)f
+(replaces)g(directory)g(names)g(with)f(the)g(results)h(of)f(w)m(ord)g
+(ex-)1110 4719 y(pansion)k(when)g(p)s(erforming)f(\014lename)i
+(completion.)67 b(This)38 b(c)m(hanges)i(the)1110 4829
+y(con)m(ten)m(ts)29 b(of)e(the)g(readline)h(editing)g(bu\013er.)38
+b(If)27 b(not)g(set,)i(Bash)e(attempts)h(to)1110 4938
+y(preserv)m(e)j(what)f(the)g(user)g(t)m(yp)s(ed.)630
+5121 y Ft(dirspell)96 b Fu(If)26 b(set,)i(Bash)f(attempts)g(sp)s
+(elling)g(correction)g(on)g(directory)g(names)f(during)1110
+5230 y(w)m(ord)36 b(completion)h(if)f(the)g(directory)g(name)g
+(initially)h(supplied)e(do)s(es)h(not)1110 5340 y(exist.)p
+eop end
+%%Page: 69 75
+TeXDict begin 69 74 bop 150 -116 a Fu(Chapter)30 b(4:)41
+b(Shell)30 b(Builtin)h(Commands)2069 b(69)630 299 y Ft(dotglob)144
+b Fu(If)36 b(set,)i(Bash)e(includes)g(\014lenames)g(b)s(eginning)f
+(with)h(a)g(`.')58 b(in)36 b(the)g(results)1110 408 y(of)f(\014lename)f
+(expansion.)53 b(The)33 b(\014lenames)i(`)p Ft(.)p Fu(')f(and)g(`)p
+Ft(..)p Fu(')g(m)m(ust)h(alw)m(a)m(ys)h(b)s(e)1110 518
+y(matc)m(hed)31 b(explicitly)-8 b(,)33 b(ev)m(en)e(if)f
+Ft(dotglob)f Fu(is)h(set.)630 682 y Ft(execfail)96 b
+Fu(If)24 b(this)h(is)f(set,)j(a)e(non-in)m(teractiv)m(e)i(shell)e(will)
+f(not)h(exit)h(if)e(it)h(cannot)h(execute)1110 792 y(the)i(\014le)g(sp)
+s(eci\014ed)g(as)g(an)g(argumen)m(t)g(to)h(the)f Ft(exec)f
+Fu(builtin)h(command.)39 b(An)1110 902 y(in)m(teractiv)m(e)33
+b(shell)e(do)s(es)f(not)g(exit)i(if)e Ft(exec)f Fu(fails.)630
+1066 y Ft(expand_aliases)1110 1176 y Fu(If)j(set,)h(aliases)g(are)g
+(expanded)e(as)h(describ)s(ed)f(b)s(elo)m(w)h(under)f(Aliases,)i(Sec-)
+1110 1285 y(tion)38 b(6.6)h([Aliases],)j(page)d(94.)64
+b(This)37 b(option)h(is)g(enabled)g(b)m(y)g(default)g(for)1110
+1395 y(in)m(teractiv)m(e)33 b(shells.)630 1559 y Ft(extdebug)96
+b Fu(If)35 b(set)i(at)f(shell)g(in)m(v)m(o)s(cation,)k(or)c(in)f(a)h
+(shell)h(startup)e(\014le,)i(arrange)g(to)f(ex-)1110
+1669 y(ecute)h(the)f(debugger)g(pro\014le)g(b)s(efore)g(the)g(shell)h
+(starts,)h(iden)m(tical)g(to)f(the)1110 1778 y Ft(--debugger)32
+b Fu(option.)56 b(If)35 b(set)h(after)g(in)m(v)m(o)s(cation,)j(b)s(eha)
+m(vior)c(in)m(tended)g(for)1110 1888 y(use)30 b(b)m(y)g(debuggers)g(is)
+h(enabled:)1159 2025 y(1.)61 b(The)37 b Ft(-F)g Fu(option)h(to)g(the)g
+Ft(declare)d Fu(builtin)i(\(see)i(Section)f(4.2)h([Bash)1290
+2134 y(Builtins],)29 b(page)g(51\))g(displa)m(ys)f(the)g(source)h
+(\014le)f(name)g(and)f(line)h(n)m(um-)1290 2244 y(b)s(er)h(corresp)s
+(onding)g(to)i(eac)m(h)g(function)f(name)g(supplied)f(as)i(an)f(argu-)
+1290 2354 y(men)m(t.)1159 2491 y(2.)61 b(If)20 b(the)h(command)g(run)e
+(b)m(y)i(the)f Ft(DEBUG)g Fu(trap)g(returns)g(a)h(non-zero)g(v)-5
+b(alue,)1290 2600 y(the)31 b(next)f(command)g(is)h(skipp)s(ed)e(and)g
+(not)i(executed.)1159 2737 y(3.)61 b(If)37 b(the)g(command)g(run)f(b)m
+(y)i(the)f Ft(DEBUG)f Fu(trap)h(returns)f(a)i(v)-5 b(alue)38
+b(of)f(2,)1290 2847 y(and)c(the)g(shell)h(is)f(executing)i(in)e(a)h
+(subroutine)e(\(a)i(shell)g(function)f(or)1290 2956 y(a)h(shell)g
+(script)f(executed)h(b)m(y)g(the)f Ft(.)h Fu(or)f Ft(source)f
+Fu(builtins\),)i(the)g(shell)1290 3066 y(sim)m(ulates)d(a)g(call)h(to)f
+Ft(return)p Fu(.)1159 3203 y(4.)61 b Ft(BASH_ARGC)34
+b Fu(and)i Ft(BASH_ARGV)e Fu(are)j(up)s(dated)e(as)h(describ)s(ed)g(in)
+g(their)1290 3313 y(descriptions)30 b(\(see)i(Section)f(5.2)g([Bash)g
+(V)-8 b(ariables],)32 b(page)f(73\).)1159 3450 y(5.)61
+b(F)-8 b(unction)57 b(tracing)g(is)g(enabled:)93 b(command)56
+b(substitution,)63 b(shell)1290 3559 y(functions,)32
+b(and)e(subshells)h(in)m(v)m(ok)m(ed)i(with)e Ft(\()f
+Fj(command)e Ft(\))j Fu(inherit)h(the)1290 3669 y Ft(DEBUG)d
+Fu(and)h Ft(RETURN)e Fu(traps.)1159 3806 y(6.)61 b(Error)41
+b(tracing)i(is)f(enabled:)63 b(command)42 b(substitution,)i(shell)f
+(func-)1290 3915 y(tions,)32 b(and)e(subshells)g(in)m(v)m(ok)m(ed)i
+(with)e Ft(\()g Fj(command)f Ft(\))h Fu(inherit)h(the)g
+Ft(ERR)1290 4025 y Fu(trap.)630 4189 y Ft(extglob)144
+b Fu(If)26 b(set,)i(the)f(extended)f(pattern)h(matc)m(hing)g(features)g
+(describ)s(ed)e(ab)s(o)m(v)m(e)j(\(see)1110 4299 y(Section)j(3.5.8.1)i
+([P)m(attern)f(Matc)m(hing],)g(page)f(33\))h(are)f(enabled.)630
+4463 y Ft(extquote)96 b Fu(If)51 b(set,)58 b Ft($')p
+Fj(string)p Ft(')49 b Fu(and)i Ft($")p Fj(string)p Ft(")e
+Fu(quoting)k(is)e(p)s(erformed)f(within)1110 4573 y Ft(${)p
+Fj(parameter)p Ft(})31 b Fu(expansions)k(enclosed)g(in)g(double)f
+(quotes.)55 b(This)33 b(option)1110 4682 y(is)d(enabled)h(b)m(y)f
+(default.)630 4847 y Ft(failglob)96 b Fu(If)36 b(set,)j(patterns)d
+(whic)m(h)g(fail)h(to)h(matc)m(h)f(\014lenames)f(during)g(\014lename)g
+(ex-)1110 4956 y(pansion)30 b(result)g(in)g(an)g(expansion)h(error.)630
+5121 y Ft(force_fignore)1110 5230 y Fu(If)43 b(set,)k(the)d(su\016xes)f
+(sp)s(eci\014ed)f(b)m(y)i(the)f Ft(FIGNORE)f Fu(shell)h(v)-5
+b(ariable)44 b(cause)1110 5340 y(w)m(ords)31 b(to)h(b)s(e)f(ignored)h
+(when)f(p)s(erforming)f(w)m(ord)h(completion)i(ev)m(en)f(if)g(the)p
+eop end
+%%Page: 70 76
+TeXDict begin 70 75 bop 150 -116 a Fu(Chapter)30 b(4:)41
+b(Shell)30 b(Builtin)h(Commands)2069 b(70)1110 299 y(ignored)37
+b(w)m(ords)g(are)g(the)h(only)f(p)s(ossible)g(completions.)62
+b(See)37 b(Section)h(5.2)1110 408 y([Bash)24 b(V)-8 b(ariables],)27
+b(page)e(73,)h(for)d(a)h(description)g(of)g Ft(FIGNORE)p
+Fu(.)37 b(This)22 b(option)1110 518 y(is)30 b(enabled)h(b)m(y)f
+(default.)630 701 y Ft(globasciiranges)1110 810 y Fu(If)j(set,)h(range)
+f(expressions)g(used)f(in)h(pattern)g(matc)m(hing)h(brac)m(k)m(et)h
+(expres-)1110 920 y(sions)28 b(\(see)h(Section)h(3.5.8.1)g([P)m(attern)
+g(Matc)m(hing],)h(page)e(33\))g(b)s(eha)m(v)m(e)g(as)g(if)1110
+1029 y(in)i(the)g(traditional)i(C)d(lo)s(cale)j(when)d(p)s(erforming)g
+(comparisons.)44 b(That)31 b(is,)1110 1139 y(the)d(curren)m(t)g(lo)s
+(cale's)i(collating)h(sequence)d(is)h(not)f(tak)m(en)h(in)m(to)g
+(accoun)m(t,)i(so)1110 1249 y(`)p Ft(b)p Fu(')j(will)g(not)g(collate)i
+(b)s(et)m(w)m(een)e(`)p Ft(A)p Fu(')g(and)f(`)p Ft(B)p
+Fu(',)h(and)f(upp)s(er-case)g(and)g(lo)m(w)m(er-)1110
+1358 y(case)e(ASCI)s(I)e(c)m(haracters)j(will)f(collate)i(together.)630
+1541 y Ft(globstar)96 b Fu(If)38 b(set,)j(the)e(pattern)f(`)p
+Ft(**)p Fu(')h(used)e(in)i(a)f(\014lename)h(expansion)f(con)m(text)j
+(will)1110 1650 y(matc)m(h)36 b(all)g(\014les)f(and)f(zero)i(or)f(more)
+g(directories)h(and)e(sub)s(directories.)54 b(If)1110
+1760 y(the)30 b(pattern)g(is)g(follo)m(w)m(ed)i(b)m(y)d(a)i(`)p
+Ft(/)p Fu(',)f(only)g(directories)h(and)f(sub)s(directories)1110
+1870 y(matc)m(h.)630 2052 y Ft(gnu_errfmt)1110 2162 y
+Fu(If)35 b(set,)j(shell)e(error)g(messages)g(are)h(written)e(in)h(the)g
+(standard)f Fm(gnu)g Fu(error)1110 2271 y(message)c(format.)630
+2454 y Ft(histappend)1110 2564 y Fu(If)c(set,)j(the)e(history)g(list)g
+(is)g(app)s(ended)e(to)j(the)f(\014le)g(named)f(b)m(y)h(the)g(v)-5
+b(alue)29 b(of)1110 2673 y(the)d Ft(HISTFILE)d Fu(v)-5
+b(ariable)26 b(when)e(the)h(shell)h(exits,)h(rather)e(than)h(o)m(v)m
+(erwriting)1110 2783 y(the)31 b(\014le.)630 2966 y Ft(histreedit)1110
+3075 y Fu(If)i(set,)h(and)f(Readline)h(is)f(b)s(eing)g(used,)g(a)g
+(user)g(is)g(giv)m(en)h(the)g(opp)s(ortunit)m(y)1110
+3185 y(to)d(re-edit)g(a)g(failed)g(history)f(substitution.)630
+3367 y Ft(histverify)1110 3477 y Fu(If)35 b(set,)i(and)e(Readline)h(is)
+f(b)s(eing)g(used,)h(the)f(results)g(of)g(history)h(substitu-)1110
+3587 y(tion)h(are)g(not)g(immediately)h(passed)e(to)h(the)g(shell)g
+(parser.)59 b(Instead,)38 b(the)1110 3696 y(resulting)i(line)f(is)h
+(loaded)g(in)m(to)g(the)g(Readline)g(editing)g(bu\013er,)h(allo)m(wing)
+1110 3806 y(further)29 b(mo)s(di\014cation.)630 3988
+y Ft(hostcomplete)1110 4098 y Fu(If)38 b(set,)j(and)c(Readline)i(is)f
+(b)s(eing)g(used,)h(Bash)g(will)f(attempt)h(to)g(p)s(erform)1110
+4208 y(hostname)d(completion)h(when)e(a)h(w)m(ord)f(con)m(taining)i(a)f
+(`)p Ft(@)p Fu(')g(is)g(b)s(eing)f(com-)1110 4317 y(pleted)g(\(see)h
+(Section)f(8.4.6)i([Commands)d(F)-8 b(or)36 b(Completion],)g(page)g
+(133\).)1110 4427 y(This)30 b(option)g(is)h(enabled)f(b)m(y)g(default.)
+630 4609 y Ft(huponexit)1110 4719 y Fu(If)i(set,)i(Bash)f(will)h(send)d
+Ft(SIGHUP)h Fu(to)h(all)h(jobs)e(when)g(an)g(in)m(teractiv)m(e)k(login)
+1110 4829 y(shell)31 b(exits)g(\(see)g(Section)g(3.7.6)h([Signals],)g
+(page)f(42\).)630 5011 y Ft(inherit_errexit)1110 5121
+y Fu(If)e(set,)h(command)g(substitution)f(inherits)g(the)g(v)-5
+b(alue)30 b(of)g(the)f Ft(errexit)f Fu(op-)1110 5230
+y(tion,)33 b(instead)g(of)f(unsetting)g(it)h(in)f(the)g(subshell)f(en)m
+(vironmen)m(t.)46 b(This)32 b(op-)1110 5340 y(tion)f(is)f(enabled)h
+(when)e Fm(posix)h Fu(mo)s(de)g(is)g(enabled.)p eop end
+%%Page: 71 77
+TeXDict begin 71 76 bop 150 -116 a Fu(Chapter)30 b(4:)41
+b(Shell)30 b(Builtin)h(Commands)2069 b(71)630 299 y Ft
+(interactive_comments)1110 408 y Fu(Allo)m(w)27 b(a)g(w)m(ord)e(b)s
+(eginning)g(with)h(`)p Ft(#)p Fu(')g(to)h(cause)f(that)h(w)m(ord)f(and)
+f(all)i(remain-)1110 518 y(ing)41 b(c)m(haracters)i(on)e(that)h(line)g
+(to)g(b)s(e)f(ignored)g(in)g(an)g(in)m(teractiv)m(e)j(shell.)1110
+628 y(This)30 b(option)g(is)h(enabled)f(b)m(y)g(default.)630
+777 y Ft(lastpipe)96 b Fu(If)24 b(set,)i(and)e(job)g(con)m(trol)i(is)f
+(not)f(activ)m(e,)k(the)d(shell)f(runs)f(the)i(last)g(command)1110
+887 y(of)37 b(a)h(pip)s(eline)e(not)h(executed)h(in)f(the)g(bac)m
+(kground)g(in)g(the)g(curren)m(t)g(shell)1110 996 y(en)m(vironmen)m(t.)
+630 1146 y Ft(lithist)144 b Fu(If)22 b(enabled,)i(and)d(the)h
+Ft(cmdhist)e Fu(option)j(is)f(enabled,)i(m)m(ulti-line)f(commands)1110
+1255 y(are)28 b(sa)m(v)m(ed)h(to)g(the)f(history)g(with)f(em)m(b)s
+(edded)g(newlines)h(rather)g(than)f(using)1110 1365 y(semicolon)32
+b(separators)f(where)e(p)s(ossible.)630 1514 y Ft(localvar_inherit)1110
+1624 y Fu(If)j(set,)h(lo)s(cal)g(v)-5 b(ariables)33 b(inherit)f(the)g
+(v)-5 b(alue)32 b(and)g(attributes)h(of)f(a)g(v)-5 b(ariable)1110
+1733 y(of)36 b(the)g(same)g(name)g(that)h(exists)f(at)h(a)f(previous)g
+(scop)s(e)g(b)s(efore)f(an)m(y)h(new)1110 1843 y(v)-5
+b(alue)31 b(is)f(assigned.)41 b(The)30 b Fr(nameref)48
+b Fu(attribute)31 b(is)f(not)h(inherited.)630 1993 y
+Ft(localvar_unset)1110 2102 y Fu(If)i(set,)i(calling)g
+Ft(unset)d Fu(on)i(lo)s(cal)g(v)-5 b(ariables)35 b(in)e(previous)g
+(function)g(scop)s(es)1110 2212 y(marks)26 b(them)g(so)g(subsequen)m(t)
+g(lo)s(okups)f(\014nd)g(them)h(unset)f(un)m(til)i(that)g(func-)1110
+2321 y(tion)40 b(returns.)68 b(This)39 b(is)g(iden)m(tical)j(to)e(the)g
+(b)s(eha)m(vior)g(of)g(unsetting)g(lo)s(cal)1110 2431
+y(v)-5 b(ariables)31 b(at)g(the)g(curren)m(t)f(function)g(scop)s(e.)630
+2580 y Ft(login_shell)1110 2690 y Fu(The)35 b(shell)h(sets)g(this)f
+(option)h(if)g(it)g(is)f(started)h(as)g(a)g(login)g(shell)g(\(see)g
+(Sec-)1110 2800 y(tion)29 b(6.1)g([In)m(v)m(oking)h(Bash],)f(page)g
+(86\).)41 b(The)28 b(v)-5 b(alue)29 b(ma)m(y)g(not)f(b)s(e)g(c)m
+(hanged.)630 2949 y Ft(mailwarn)96 b Fu(If)34 b(set,)i(and)e(a)h
+(\014le)g(that)g(Bash)f(is)h(c)m(hec)m(king)h(for)f(mail)g(has)f(b)s
+(een)g(accessed)1110 3059 y(since)24 b(the)h(last)g(time)f(it)h(w)m(as)
+f(c)m(hec)m(k)m(ed,)k(the)c(message)h Ft("The)k(mail)h(in)f
+Fj(mail-)1110 3168 y(file)g Ft(has)h(been)f(read")g Fu(is)h(displa)m(y)
+m(ed.)630 3318 y Ft(no_empty_cmd_completion)1110 3427
+y Fu(If)g(set,)g(and)g(Readline)g(is)h(b)s(eing)e(used,)h(Bash)g(will)g
+(not)g(attempt)i(to)e(searc)m(h)1110 3537 y(the)25 b
+Ft(PATH)f Fu(for)h(p)s(ossible)f(completions)j(when)d(completion)i(is)f
+(attempted)h(on)1110 3646 y(an)k(empt)m(y)h(line.)630
+3796 y Ft(nocaseglob)1110 3905 y Fu(If)38 b(set,)k(Bash)d(matc)m(hes)g
+(\014lenames)g(in)f(a)h(case-insensitiv)m(e)j(fashion)c(when)1110
+4015 y(p)s(erforming)29 b(\014lename)i(expansion.)630
+4164 y Ft(nocasematch)1110 4274 y Fu(If)42 b(set,)k(Bash)d(matc)m(hes)g
+(patterns)g(in)f(a)h(case-insensitiv)m(e)i(fashion)d(when)1110
+4384 y(p)s(erforming)31 b(matc)m(hing)i(while)f(executing)i
+Ft(case)d Fu(or)h Ft([[)g Fu(conditional)h(com-)1110
+4493 y(mands,)d(when)g(p)s(erforming)g(pattern)h(substitution)g(w)m
+(ord)g(expansions,)g(or)1110 4603 y(when)g(\014ltering)i(p)s(ossible)f
+(completions)h(as)g(part)f(of)h(programmable)f(com-)1110
+4712 y(pletion.)630 4862 y Ft(nullglob)96 b Fu(If)23
+b(set,)j(Bash)e(allo)m(ws)g(\014lename)g(patterns)g(whic)m(h)f(matc)m
+(h)h(no)g(\014les)f(to)i(expand)1110 4971 y(to)31 b(a)g(n)m(ull)f
+(string,)h(rather)f(than)g(themselv)m(es.)630 5121 y
+Ft(progcomp)96 b Fu(If)25 b(set,)i(the)f(programmable)g(completion)g
+(facilities)i(\(see)f(Section)f(8.6)h([Pro-)1110 5230
+y(grammable)45 b(Completion],)k(page)c(137\))h(are)f(enabled.)82
+b(This)44 b(option)h(is)1110 5340 y(enabled)30 b(b)m(y)h(default.)p
+eop end
+%%Page: 72 78
+TeXDict begin 72 77 bop 150 -116 a Fu(Chapter)30 b(4:)41
+b(Shell)30 b(Builtin)h(Commands)2069 b(72)630 299 y Ft(progcomp_alias)
+1110 408 y Fu(If)23 b(set,)j(and)d(programmable)h(completion)h(is)f
+(enabled,)h(Bash)f(treats)h(a)f(com-)1110 518 y(mand)34
+b(name)h(that)g(do)s(esn't)f(ha)m(v)m(e)i(an)m(y)g(completions)f(as)g
+(a)g(p)s(ossible)g(alias)1110 628 y(and)40 b(attempts)i(alias)h
+(expansion.)72 b(If)41 b(it)g(has)g(an)g(alias,)k(Bash)c(attempts)1110
+737 y(programmable)28 b(completion)h(using)e(the)h(command)f(w)m(ord)h
+(resulting)f(from)1110 847 y(the)k(expanded)e(alias.)630
+1006 y Ft(promptvars)1110 1116 y Fu(If)50 b(set,)56 b(prompt)49
+b(strings)h(undergo)g(parameter)h(expansion,)k(command)1110
+1225 y(substitution,)35 b(arithmetic)g(expansion,)g(and)e(quote)i(remo)
+m(v)-5 b(al)35 b(after)f(b)s(eing)1110 1335 y(expanded)53
+b(as)h(describ)s(ed)e(b)s(elo)m(w)i(\(see)h(Section)f(6.9)h([Con)m
+(trolling)g(the)1110 1445 y(Prompt],)30 b(page)h(98\).)42
+b(This)30 b(option)h(is)f(enabled)h(b)m(y)f(default.)630
+1604 y Ft(restricted_shell)1110 1714 y Fu(The)40 b(shell)h(sets)g(this)
+g(option)g(if)g(it)h(is)e(started)i(in)e(restricted)i(mo)s(de)e(\(see)
+1110 1823 y(Section)32 b(6.10)h([The)d(Restricted)j(Shell],)e(page)h
+(100\).)45 b(The)30 b(v)-5 b(alue)32 b(ma)m(y)g(not)1110
+1933 y(b)s(e)g(c)m(hanged.)49 b(This)32 b(is)h(not)h(reset)f(when)f
+(the)h(startup)g(\014les)f(are)i(executed,)1110 2042
+y(allo)m(wing)k(the)e(startup)f(\014les)h(to)g(disco)m(v)m(er)h
+(whether)f(or)f(not)i(a)f(shell)g(is)g(re-)1110 2152
+y(stricted.)630 2311 y Ft(shift_verbose)1110 2421 y Fu(If)g(this)g(is)g
+(set,)j(the)d Ft(shift)f Fu(builtin)h(prin)m(ts)f(an)h(error)g(message)
+i(when)d(the)1110 2531 y(shift)30 b(coun)m(t)h(exceeds)g(the)g(n)m(um)m
+(b)s(er)e(of)h(p)s(ositional)i(parameters.)630 2690 y
+Ft(sourcepath)1110 2800 y Fu(If)22 b(set,)j(the)e Ft(source)e
+Fu(builtin)h(uses)g(the)h(v)-5 b(alue)23 b(of)g Ft(PATH)e
+Fu(to)j(\014nd)d(the)h(directory)1110 2909 y(con)m(taining)29
+b(the)e(\014le)h(supplied)e(as)h(an)g(argumen)m(t.)40
+b(This)27 b(option)h(is)f(enabled)1110 3019 y(b)m(y)j(default.)630
+3178 y Ft(xpg_echo)96 b Fu(If)31 b(set,)h(the)g Ft(echo)e
+Fu(builtin)h(expands)f(bac)m(kslash-escap)s(e)j(sequences)f(b)m(y)f
+(de-)1110 3288 y(fault.)150 3528 y Fs(4.4)68 b(Sp)t(ecial)45
+b(Builtins)150 3688 y Fu(F)-8 b(or)35 b(historical)h(reasons,)g(the)e
+Fm(posix)g Fu(standard)f(has)i(classi\014ed)f(sev)m(eral)i(builtin)e
+(commands)g(as)h Fl(sp)-5 b(e-)150 3797 y(cial)p Fu(.)47
+b(When)33 b(Bash)f(is)h(executing)g(in)f Fm(posix)g Fu(mo)s(de,)h(the)g
+(sp)s(ecial)g(builtins)e(di\013er)i(from)f(other)g(builtin)150
+3907 y(commands)e(in)g(three)h(resp)s(ects:)199 4042
+y(1.)61 b(Sp)s(ecial)31 b(builtins)e(are)i(found)e(b)s(efore)h(shell)h
+(functions)f(during)f(command)h(lo)s(okup.)199 4176 y(2.)61
+b(If)30 b(a)h(sp)s(ecial)g(builtin)f(returns)f(an)h(error)g(status,)h
+(a)g(non-in)m(teractiv)m(e)i(shell)d(exits.)199 4311
+y(3.)61 b(Assignmen)m(t)30 b(statemen)m(ts)h(preceding)f(the)f(command)
+g(sta)m(y)i(in)e(e\013ect)i(in)e(the)h(shell)f(en)m(vironmen)m(t)330
+4420 y(after)i(the)f(command)h(completes.)275 4579 y(When)36
+b(Bash)g(is)h(not)f(executing)i(in)e Fm(posix)f Fu(mo)s(de,)j(these)f
+(builtins)f(b)s(eha)m(v)m(e)h(no)f(di\013eren)m(tly)h(than)150
+4689 y(the)31 b(rest)f(of)h(the)f(Bash)h(builtin)e(commands.)41
+b(The)30 b(Bash)g Fm(posix)g Fu(mo)s(de)g(is)g(describ)s(ed)f(in)h
+(Section)h(6.11)150 4799 y([Bash)g(POSIX)e(Mo)s(de],)i(page)g(101.)275
+4933 y(These)f(are)g(the)h Fm(posix)f Fu(sp)s(ecial)h(builtins:)390
+5068 y Ft(break)46 b(:)i(.)f(continue)f(eval)g(exec)h(exit)g(export)f
+(readonly)f(return)h(set)390 5177 y(shift)g(trap)h(unset)p
+eop end
+%%Page: 73 79
+TeXDict begin 73 78 bop 3659 -116 a Fu(73)150 299 y Fp(5)80
+b(Shell)53 b(V)-13 b(ariables)150 504 y Fu(This)21 b(c)m(hapter)i
+(describ)s(es)e(the)i(shell)f(v)-5 b(ariables)23 b(that)f(Bash)h(uses.)
+37 b(Bash)23 b(automatically)h(assigns)f(default)150
+614 y(v)-5 b(alues)31 b(to)g(a)g(n)m(um)m(b)s(er)e(of)h(v)-5
+b(ariables.)150 843 y Fs(5.1)68 b(Bourne)45 b(Shell)g(V)-11
+b(ariables)150 1003 y Fu(Bash)30 b(uses)g(certain)h(shell)g(v)-5
+b(ariables)31 b(in)f(the)g(same)h(w)m(a)m(y)g(as)g(the)f(Bourne)g
+(shell.)41 b(In)30 b(some)g(cases,)i(Bash)150 1112 y(assigns)f(a)f
+(default)h(v)-5 b(alue)31 b(to)g(the)f(v)-5 b(ariable.)150
+1260 y Ft(CDPATH)192 b Fu(A)39 b(colon-separated)i(list)e(of)g
+(directories)h(used)f(as)g(a)g(searc)m(h)h(path)e(for)h(the)g
+Ft(cd)f Fu(builtin)630 1370 y(command.)150 1518 y Ft(HOME)288
+b Fu(The)23 b(curren)m(t)h(user's)f(home)g(directory;)k(the)d(default)g
+(for)f(the)h Ft(cd)f Fu(builtin)g(command.)38 b(The)630
+1628 y(v)-5 b(alue)37 b(of)f(this)g(v)-5 b(ariable)37
+b(is)g(also)g(used)e(b)m(y)h(tilde)h(expansion)f(\(see)i(Section)f
+(3.5.2)h([Tilde)630 1737 y(Expansion],)30 b(page)h(24\).)150
+1885 y Ft(IFS)336 b Fu(A)25 b(list)i(of)e(c)m(haracters)i(that)f
+(separate)g(\014elds;)h(used)e(when)f(the)i(shell)f(splits)h(w)m(ords)e
+(as)i(part)630 1995 y(of)31 b(expansion.)150 2143 y Ft(MAIL)288
+b Fu(If)44 b(this)g(parameter)h(is)g(set)g(to)g(a)f(\014lename)h(or)f
+(directory)h(name)g(and)f(the)g Ft(MAILPATH)630 2252
+y Fu(v)-5 b(ariable)32 b(is)e(not)h(set,)h(Bash)f(informs)f(the)h(user)
+f(of)h(the)g(arriv)-5 b(al)31 b(of)g(mail)g(in)g(the)g(sp)s(eci\014ed)
+630 2362 y(\014le)f(or)h(Maildir-format)g(directory)-8
+b(.)150 2510 y Ft(MAILPATH)96 b Fu(A)33 b(colon-separated)i(list)f(of)f
+(\014lenames)h(whic)m(h)f(the)g(shell)g(p)s(erio)s(dically)h(c)m(hec)m
+(ks)g(for)f(new)630 2619 y(mail.)60 b(Eac)m(h)37 b(list)g(en)m(try)g
+(can)g(sp)s(ecify)f(the)h(message)h(that)f(is)g(prin)m(ted)f(when)f
+(new)h(mail)630 2729 y(arriv)m(es)31 b(in)g(the)g(mail)g(\014le)g(b)m
+(y)g(separating)h(the)f(\014lename)g(from)f(the)h(message)h(with)e(a)i
+(`)p Ft(?)p Fu('.)630 2839 y(When)g(used)f(in)h(the)g(text)i(of)e(the)g
+(message,)i Ft($_)e Fu(expands)f(to)i(the)f(name)g(of)h(the)f(curren)m
+(t)630 2948 y(mail)f(\014le.)150 3096 y Ft(OPTARG)192
+b Fu(The)30 b(v)-5 b(alue)31 b(of)f(the)h(last)g(option)g(argumen)m(t)g
+(pro)s(cessed)f(b)m(y)g(the)g Ft(getopts)f Fu(builtin.)150
+3244 y Ft(OPTIND)192 b Fu(The)30 b(index)g(of)g(the)h(last)g(option)g
+(argumen)m(t)g(pro)s(cessed)f(b)m(y)g(the)g Ft(getopts)f
+Fu(builtin.)150 3392 y Ft(PATH)288 b Fu(A)32 b(colon-separated)i(list)f
+(of)f(directories)h(in)e(whic)m(h)h(the)g(shell)g(lo)s(oks)h(for)f
+(commands.)45 b(A)630 3502 y(zero-length)e(\(n)m(ull\))g(directory)f
+(name)g(in)g(the)g(v)-5 b(alue)42 b(of)g Ft(PATH)f Fu(indicates)i(the)f
+(curren)m(t)630 3611 y(directory)-8 b(.)49 b(A)33 b(n)m(ull)f
+(directory)i(name)e(ma)m(y)i(app)s(ear)e(as)h(t)m(w)m(o)h(adjacen)m(t)g
+(colons,)g(or)f(as)g(an)630 3721 y(initial)f(or)e(trailing)h(colon.)150
+3869 y Ft(PS1)336 b Fu(The)35 b(primary)f(prompt)h(string.)55
+b(The)35 b(default)h(v)-5 b(alue)35 b(is)h(`)p Ft(\\s-\\v\\$)28
+b Fu('.)56 b(See)36 b(Section)g(6.9)630 3979 y([Con)m(trolling)42
+b(the)e(Prompt],)j(page)e(98,)j(for)c(the)g(complete)i(list)f(of)f
+(escap)s(e)h(sequences)630 4088 y(that)31 b(are)g(expanded)e(b)s(efore)
+h Ft(PS1)g Fu(is)g(displa)m(y)m(ed.)150 4236 y Ft(PS2)336
+b Fu(The)28 b(secondary)g(prompt)g(string.)40 b(The)28
+b(default)g(v)-5 b(alue)29 b(is)g(`)p Ft(>)h Fu('.)40
+b Ft(PS2)28 b Fu(is)g(expanded)g(in)g(the)630 4346 y(same)j(w)m(a)m(y)g
+(as)g Ft(PS1)e Fu(b)s(efore)h(b)s(eing)g(displa)m(y)m(ed.)150
+4575 y Fs(5.2)68 b(Bash)45 b(V)-11 b(ariables)150 4734
+y Fu(These)45 b(v)-5 b(ariables)46 b(are)g(set)g(or)f(used)f(b)m(y)h
+(Bash,)50 b(but)44 b(other)i(shells)f(do)h(not)f(normally)h(treat)g
+(them)150 4844 y(sp)s(ecially)-8 b(.)275 4973 y(A)24
+b(few)g(v)-5 b(ariables)24 b(used)g(b)m(y)f(Bash)i(are)f(describ)s(ed)f
+(in)h(di\013eren)m(t)g(c)m(hapters:)38 b(v)-5 b(ariables)25
+b(for)f(con)m(trolling)150 5082 y(the)31 b(job)f(con)m(trol)h
+(facilities)i(\(see)e(Section)g(7.3)h([Job)e(Con)m(trol)h(V)-8
+b(ariables],)32 b(page)g(110\).)150 5230 y Ft(_)432 b
+Fu(\($)p 716 5230 28 4 v 41 w(,)34 b(an)g(underscore.\))49
+b(A)m(t)35 b(shell)f(startup,)g(set)g(to)g(the)g(pathname)f(used)g(to)h
+(in)m(v)m(ok)m(e)i(the)630 5340 y(shell)e(or)g(shell)h(script)f(b)s
+(eing)f(executed)j(as)e(passed)g(in)f(the)i(en)m(vironmen)m(t)f(or)g
+(argumen)m(t)p eop end
+%%Page: 74 80
+TeXDict begin 74 79 bop 150 -116 a Fu(Chapter)30 b(5:)41
+b(Shell)30 b(V)-8 b(ariables)2459 b(74)630 299 y(list.)55
+b(Subsequen)m(tly)-8 b(,)35 b(expands)f(to)i(the)f(last)g(argumen)m(t)h
+(to)f(the)g(previous)f(simple)h(com-)630 408 y(mand)21
+b(executed)i(in)e(the)i(foreground,)g(after)f(expansion.)38
+b(Also)22 b(set)h(to)f(the)g(full)g(pathname)630 518
+y(used)h(to)i(in)m(v)m(ok)m(e)h(eac)m(h)g(command)e(executed)h(and)f
+(placed)g(in)g(the)g(en)m(vironmen)m(t)h(exp)s(orted)630
+628 y(to)33 b(that)g(command.)45 b(When)32 b(c)m(hec)m(king)i(mail,)g
+(this)e(parameter)g(holds)g(the)g(name)g(of)h(the)630
+737 y(mail)e(\014le.)150 920 y Ft(BASH)288 b Fu(The)30
+b(full)g(pathname)g(used)g(to)h(execute)h(the)e(curren)m(t)g(instance)h
+(of)g(Bash.)150 1103 y Ft(BASHOPTS)96 b Fu(A)31 b(colon-separated)h
+(list)f(of)g(enabled)f(shell)h(options.)41 b(Eac)m(h)31
+b(w)m(ord)f(in)g(the)h(list)g(is)g(a)g(v)-5 b(alid)630
+1212 y(argumen)m(t)37 b(for)g(the)g Ft(-s)f Fu(option)i(to)f(the)g
+Ft(shopt)f Fu(builtin)g(command)h(\(see)g(Section)h(4.3.2)630
+1322 y([The)e(Shopt)g(Builtin],)i(page)f(66\).)60 b(The)36
+b(options)h(app)s(earing)f(in)g Ft(BASHOPTS)e Fu(are)i(those)630
+1431 y(rep)s(orted)e(as)h(`)p Ft(on)p Fu(')f(b)m(y)h(`)p
+Ft(shopt)p Fu('.)53 b(If)34 b(this)g(v)-5 b(ariable)36
+b(is)f(in)f(the)h(en)m(vironmen)m(t)g(when)f(Bash)630
+1541 y(starts)25 b(up,)f(eac)m(h)i(shell)e(option)h(in)e(the)i(list)g
+(will)f(b)s(e)g(enabled)g(b)s(efore)g(reading)g(an)m(y)g(startup)630
+1650 y(\014les.)41 b(This)29 b(v)-5 b(ariable)31 b(is)g(readonly)-8
+b(.)150 1833 y Ft(BASHPID)144 b Fu(Expands)35 b(to)i(the)f(pro)s(cess)f
+(ID)i(of)f(the)g(curren)m(t)g(Bash)g(pro)s(cess.)58 b(This)35
+b(di\013ers)h(from)g Ft($$)630 1943 y Fu(under)31 b(certain)j
+(circumstances,)h(suc)m(h)e(as)g(subshells)f(that)i(do)f(not)g(require)
+g(Bash)g(to)h(b)s(e)630 2052 y(re-initialized.)57 b(Assignmen)m(ts)35
+b(to)h Ft(BASHPID)d Fu(ha)m(v)m(e)j(no)f(e\013ect.)56
+b(If)34 b Ft(BASHPID)f Fu(is)i(unset,)h(it)630 2162 y(loses)31
+b(its)g(sp)s(ecial)g(prop)s(erties,)f(ev)m(en)h(if)f(it)h(is)g
+(subsequen)m(tly)f(reset.)150 2345 y Ft(BASH_ALIASES)630
+2454 y Fu(An)40 b(asso)s(ciativ)m(e)j(arra)m(y)d(v)-5
+b(ariable)41 b(whose)f(mem)m(b)s(ers)f(corresp)s(ond)g(to)i(the)f(in)m
+(ternal)h(list)630 2564 y(of)c(aliases)h(as)f(main)m(tained)g(b)m(y)g
+(the)g Ft(alias)e Fu(builtin.)59 b(\(see)37 b(Section)h(4.1)f([Bourne)g
+(Shell)630 2673 y(Builtins],)31 b(page)g(44\).)42 b(Elemen)m(ts)31
+b(added)e(to)i(this)f(arra)m(y)h(app)s(ear)f(in)g(the)g(alias)h(list;)h
+(ho)m(w-)630 2783 y(ev)m(er,)k(unsetting)f(arra)m(y)g(elemen)m(ts)g
+(curren)m(tly)g(do)s(es)f(not)g(cause)h(aliases)h(to)f(b)s(e)f(remo)m
+(v)m(ed)630 2892 y(from)25 b(the)h(alias)h(list.)40 b(If)25
+b Ft(BASH_ALIASES)d Fu(is)k(unset,)g(it)g(loses)h(its)f(sp)s(ecial)g
+(prop)s(erties,)g(ev)m(en)630 3002 y(if)k(it)h(is)g(subsequen)m(tly)f
+(reset.)150 3185 y Ft(BASH_ARGC)630 3294 y Fu(An)39 b(arra)m(y)g(v)-5
+b(ariable)40 b(whose)f(v)-5 b(alues)39 b(are)h(the)f(n)m(um)m(b)s(er)f
+(of)h(parameters)g(in)g(eac)m(h)h(frame)630 3404 y(of)i(the)g(curren)m
+(t)g(bash)f(execution)i(call)g(stac)m(k.)76 b(The)42
+b(n)m(um)m(b)s(er)e(of)i(parameters)g(to)h(the)630 3513
+y(curren)m(t)38 b(subroutine)f(\(shell)i(function)e(or)i(script)f
+(executed)h(with)e Ft(.)h Fu(or)g Ft(source)p Fu(\))f(is)h(at)630
+3623 y(the)27 b(top)g(of)g(the)g(stac)m(k.)41 b(When)27
+b(a)g(subroutine)f(is)h(executed,)i(the)e(n)m(um)m(b)s(er)f(of)h
+(parameters)630 3733 y(passed)44 b(is)h(pushed)e(on)m(to)j
+Ft(BASH_ARGC)p Fu(.)81 b(The)44 b(shell)h(sets)g Ft(BASH_ARGC)e
+Fu(only)i(when)e(in)630 3842 y(extended)34 b(debugging)f(mo)s(de)g
+(\(see)i(Section)f(4.3.2)i([The)d(Shopt)g(Builtin],)i(page)g(66,)g(for)
+630 3952 y(a)e(description)g(of)f(the)h Ft(extdebug)d
+Fu(option)j(to)h(the)e Ft(shopt)g Fu(builtin\).)47 b(Setting)33
+b Ft(extdebug)630 4061 y Fu(after)c(the)g(shell)g(has)g(started)g(to)g
+(execute)i(a)e(script,)g(or)g(referencing)g(this)f(v)-5
+b(ariable)30 b(when)630 4171 y Ft(extdebug)e Fu(is)j(not)f(set,)h(ma)m
+(y)g(result)g(in)f(inconsisten)m(t)h(v)-5 b(alues.)150
+4354 y Ft(BASH_ARGV)630 4463 y Fu(An)24 b(arra)m(y)g(v)-5
+b(ariable)25 b(con)m(taining)h(all)f(of)f(the)h(parameters)f(in)g(the)g
+(curren)m(t)g(bash)g(execution)630 4573 y(call)35 b(stac)m(k.)53
+b(The)34 b(\014nal)g(parameter)g(of)g(the)g(last)h(subroutine)e(call)i
+(is)f(at)h(the)f(top)h(of)f(the)630 4682 y(stac)m(k;)28
+b(the)c(\014rst)f(parameter)i(of)f(the)g(initial)i(call)f(is)f(at)h
+(the)f(b)s(ottom.)39 b(When)24 b(a)g(subroutine)630 4792
+y(is)40 b(executed,)j(the)d(parameters)h(supplied)d(are)i(pushed)f(on)m
+(to)i Ft(BASH_ARGV)p Fu(.)66 b(The)40 b(shell)630 4902
+y(sets)28 b Ft(BASH_ARGV)e Fu(only)i(when)f(in)h(extended)g(debugging)g
+(mo)s(de)g(\(see)h(Section)f(4.3.2)i([The)630 5011 y(Shopt)g(Builtin],)
+h(page)g(66,)g(for)g(a)f(description)h(of)f(the)h Ft(extdebug)d
+Fu(option)j(to)g(the)f Ft(shopt)630 5121 y Fu(builtin\).)64
+b(Setting)38 b Ft(extdebug)e Fu(after)j(the)f(shell)g(has)g(started)g
+(to)h(execute)g(a)g(script,)h(or)630 5230 y(referencing)35
+b(this)f(v)-5 b(ariable)35 b(when)e Ft(extdebug)f Fu(is)j(not)f(set,)j
+(ma)m(y)e(result)f(in)g(inconsisten)m(t)630 5340 y(v)-5
+b(alues.)p eop end
+%%Page: 75 81
+TeXDict begin 75 80 bop 150 -116 a Fu(Chapter)30 b(5:)41
+b(Shell)30 b(V)-8 b(ariables)2459 b(75)150 299 y Ft(BASH_ARGV0)630
+408 y Fu(When)31 b(referenced,)g(this)g(v)-5 b(ariable)32
+b(expands)e(to)h(the)h(name)f(of)g(the)g(shell)g(or)g(shell)g(script)
+630 518 y(\(iden)m(tical)42 b(to)e Ft($0)p Fu(;)j(See)d(Section)g
+(3.4.2)i([Sp)s(ecial)e(P)m(arameters],)j(page)d(21,)j(for)c(the)h(de-)
+630 628 y(scription)32 b(of)g(sp)s(ecial)g(parameter)g(0\).)45
+b(Assignmen)m(t)32 b(to)h Ft(BASH_ARGV0)c Fu(causes)j(the)f(v)-5
+b(alue)630 737 y(assigned)34 b(to)h(also)g(b)s(e)e(assigned)h(to)g
+Ft($0)p Fu(.)51 b(If)33 b Ft(BASH_ARGV0)f Fu(is)h(unset,)i(it)f(loses)h
+(its)f(sp)s(ecial)630 847 y(prop)s(erties,)c(ev)m(en)h(if)f(it)h(is)g
+(subsequen)m(tly)f(reset.)150 1048 y Ft(BASH_CMDS)630
+1157 y Fu(An)k(asso)s(ciativ)m(e)i(arra)m(y)f(v)-5 b(ariable)35
+b(whose)f(mem)m(b)s(ers)f(corresp)s(ond)g(to)i(the)f(in)m(ternal)h
+(hash)630 1267 y(table)c(of)g(commands)f(as)g(main)m(tained)h(b)m(y)g
+(the)f Ft(hash)f Fu(builtin)h(\(see)h(Section)g(4.1)h([Bourne)630
+1377 y(Shell)42 b(Builtins],)k(page)d(44\).)77 b(Elemen)m(ts)43
+b(added)e(to)i(this)f(arra)m(y)h(app)s(ear)f(in)f(the)i(hash)630
+1486 y(table;)k(ho)m(w)m(ev)m(er,)e(unsetting)c(arra)m(y)g(elemen)m(ts)
+i(curren)m(tly)d(do)s(es)h(not)g(cause)g(command)630
+1596 y(names)36 b(to)g(b)s(e)f(remo)m(v)m(ed)i(from)e(the)h(hash)f
+(table.)58 b(If)36 b Ft(BASH_CMDS)d Fu(is)j(unset,)h(it)f(loses)h(its)
+630 1705 y(sp)s(ecial)31 b(prop)s(erties,)f(ev)m(en)h(if)f(it)h(is)g
+(subsequen)m(tly)f(reset.)150 1906 y Ft(BASH_COMMAND)630
+2016 y Fu(The)39 b(command)h(curren)m(tly)g(b)s(eing)f(executed)i(or)e
+(ab)s(out)h(to)g(b)s(e)f(executed,)44 b(unless)39 b(the)630
+2125 y(shell)g(is)g(executing)g(a)g(command)g(as)g(the)f(result)h(of)g
+(a)g(trap,)i(in)d(whic)m(h)g(case)i(it)f(is)g(the)630
+2235 y(command)30 b(executing)i(at)g(the)f(time)g(of)g(the)g(trap.)41
+b(If)30 b Ft(BASH_COMMAND)e Fu(is)i(unset,)h(it)g(loses)630
+2345 y(its)g(sp)s(ecial)g(prop)s(erties,)f(ev)m(en)h(if)f(it)h(is)f
+(subsequen)m(tly)g(reset.)150 2545 y Ft(BASH_COMPAT)630
+2655 y Fu(The)i(v)-5 b(alue)33 b(is)g(used)f(to)h(set)g(the)g(shell's)g
+(compatibilit)m(y)i(lev)m(el.)49 b(See)33 b(Section)h(6.12)g([Shell)630
+2765 y(Compatibilit)m(y)j(Mo)s(de],)h(page)e(104,)i(for)e(a)g
+(description)g(of)f(the)h(v)-5 b(arious)36 b(compatibilit)m(y)630
+2874 y(lev)m(els)g(and)f(their)g(e\013ects.)55 b(The)34
+b(v)-5 b(alue)36 b(ma)m(y)f(b)s(e)f(a)i(decimal)f(n)m(um)m(b)s(er)f
+(\(e.g.,)k(4.2\))e(or)f(an)630 2984 y(in)m(teger)44 b(\(e.g.,)j(42\))d
+(corresp)s(onding)d(to)i(the)g(desired)e(compatibilit)m(y)k(lev)m(el.)
+78 b(If)42 b Ft(BASH_)630 3093 y(COMPAT)28 b Fu(is)j(unset)e(or)h(set)h
+(to)g(the)f(empt)m(y)h(string,)f(the)h(compatibilit)m(y)h(lev)m(el)g
+(is)e(set)h(to)g(the)630 3203 y(default)39 b(for)g(the)g(curren)m(t)g
+(v)m(ersion.)67 b(If)38 b Ft(BASH_COMPAT)e Fu(is)j(set)h(to)f(a)h(v)-5
+b(alue)39 b(that)h(is)f(not)630 3313 y(one)31 b(of)f(the)h(v)-5
+b(alid)31 b(compatibilit)m(y)i(lev)m(els,)f(the)f(shell)f(prin)m(ts)g
+(an)h(error)f(message)i(and)e(sets)630 3422 y(the)i(compatibilit)m(y)j
+(lev)m(el)e(to)g(the)g(default)f(for)g(the)g(curren)m(t)g(v)m(ersion.)
+47 b(The)31 b(v)-5 b(alid)33 b(v)-5 b(alues)630 3532
+y(corresp)s(ond)31 b(to)i(the)g(compatibilit)m(y)i(lev)m(els)f(describ)
+s(ed)d(b)s(elo)m(w)i(\(see)g(Section)h(6.12)g([Shell)630
+3641 y(Compatibilit)m(y)d(Mo)s(de],)f(page)g(104\).)42
+b(F)-8 b(or)30 b(example,)h(4.2)f(and)f(42)h(are)g(v)-5
+b(alid)30 b(v)-5 b(alues)29 b(that)630 3751 y(corresp)s(ond)d(to)i(the)
+f Ft(compat42)e(shopt)g Fu(option)j(and)e(set)i(the)f(compatibilit)m(y)
+i(lev)m(el)g(to)f(42.)630 3861 y(The)i(curren)m(t)g(v)m(ersion)h(is)f
+(also)i(a)e(v)-5 b(alid)31 b(v)-5 b(alue.)150 4061 y
+Ft(BASH_ENV)96 b Fu(If)28 b(this)g(v)-5 b(ariable)30
+b(is)e(set)h(when)f(Bash)g(is)h(in)m(v)m(ok)m(ed)h(to)f(execute)h(a)e
+(shell)h(script,)g(its)g(v)-5 b(alue)29 b(is)630 4171
+y(expanded)k(and)h(used)g(as)g(the)h(name)f(of)g(a)h(startup)f(\014le)g
+(to)h(read)f(b)s(efore)g(executing)i(the)630 4281 y(script.)41
+b(See)30 b(Section)h(6.2)h([Bash)f(Startup)e(Files],)j(page)f(88.)150
+4482 y Ft(BASH_EXECUTION_STRING)630 4591 y Fu(The)f(command)g(argumen)m
+(t)h(to)g(the)g Ft(-c)e Fu(in)m(v)m(o)s(cation)k(option.)150
+4792 y Ft(BASH_LINENO)630 4902 y Fu(An)62 b(arra)m(y)i(v)-5
+b(ariable)63 b(whose)g(mem)m(b)s(ers)e(are)j(the)e(line)h(n)m(um)m(b)s
+(ers)f(in)g(source)h(\014les)630 5011 y(where)46 b(eac)m(h)i(corresp)s
+(onding)d(mem)m(b)s(er)h(of)h Fr(FUNCNAME)53 b Fu(w)m(as)47
+b(in)m(v)m(ok)m(ed.)91 b Ft(${BASH_)630 5121 y(LINENO[$i]})39
+b Fu(is)i(the)h(line)g(n)m(um)m(b)s(er)e(in)i(the)f(source)h(\014le)g
+(\()p Ft(${BASH_SOURCE[$i+1]})p Fu(\))630 5230 y(where)d
+Ft(${FUNCNAME[$i]})c Fu(w)m(as)k(called)i(\(or)e Ft
+(${BASH_LINENO[$i-1]})34 b Fu(if)39 b(referenced)630
+5340 y(within)30 b(another)g(shell)h(function\).)41 b(Use)31
+b Ft(LINENO)d Fu(to)j(obtain)g(the)g(curren)m(t)f(line)h(n)m(um)m(b)s
+(er.)p eop end
+%%Page: 76 82
+TeXDict begin 76 81 bop 150 -116 a Fu(Chapter)30 b(5:)41
+b(Shell)30 b(V)-8 b(ariables)2459 b(76)150 299 y Ft
+(BASH_LOADABLES_PATH)630 408 y Fu(A)39 b(colon-separated)i(list)f(of)f
+(directories)h(in)f(whic)m(h)g(the)g(shell)h(lo)s(oks)f(for)g
+(dynamically)630 518 y(loadable)32 b(builtins)d(sp)s(eci\014ed)h(b)m(y)
+g(the)h Ft(enable)e Fu(command.)150 673 y Ft(BASH_REMATCH)630
+783 y Fu(An)43 b(arra)m(y)i(v)-5 b(ariable)44 b(whose)g(mem)m(b)s(ers)f
+(are)h(assigned)g(b)m(y)f(the)h(`)p Ft(=~)p Fu(')g(binary)f(op)s
+(erator)630 892 y(to)37 b(the)f Ft([[)g Fu(conditional)i(command)e
+(\(see)h(Section)g(3.2.5.2)i([Conditional)e(Constructs],)630
+1002 y(page)e(11\).)52 b(The)33 b(elemen)m(t)j(with)d(index)g(0)i(is)f
+(the)g(p)s(ortion)f(of)h(the)g(string)g(matc)m(hing)h(the)630
+1112 y(en)m(tire)29 b(regular)f(expression.)40 b(The)27
+b(elemen)m(t)j(with)d(index)h Fr(n)f Fu(is)h(the)g(p)s(ortion)g(of)g
+(the)g(string)630 1221 y(matc)m(hing)j(the)g Fr(n)p Fu(th)f(paren)m
+(thesized)h(sub)s(expression.)150 1377 y Ft(BASH_SOURCE)630
+1486 y Fu(An)40 b(arra)m(y)h(v)-5 b(ariable)41 b(whose)f(mem)m(b)s(ers)
+g(are)h(the)g(source)f(\014lenames)h(where)f(the)g(corre-)630
+1596 y(sp)s(onding)27 b(shell)i(function)f(names)g(in)g(the)h
+Ft(FUNCNAME)d Fu(arra)m(y)j(v)-5 b(ariable)30 b(are)f(de\014ned.)38
+b(The)630 1705 y(shell)26 b(function)g Ft(${FUNCNAME[$i]})c
+Fu(is)k(de\014ned)f(in)g(the)h(\014le)h Ft(${BASH_SOURCE[$i]})21
+b Fu(and)630 1815 y(called)32 b(from)d Ft(${BASH_SOURCE[$i+1]})150
+1970 y(BASH_SUBSHELL)630 2080 y Fu(Incremen)m(ted)24
+b(b)m(y)f(one)h(within)f(eac)m(h)i(subshell)d(or)i(subshell)e(en)m
+(vironmen)m(t)i(when)f(the)h(shell)630 2189 y(b)s(egins)j(executing)i
+(in)e(that)h(en)m(vironmen)m(t.)41 b(The)27 b(initial)i(v)-5
+b(alue)28 b(is)f(0.)40 b(If)28 b Ft(BASH_SUBSHELL)630
+2299 y Fu(is)i(unset,)h(it)g(loses)g(its)f(sp)s(ecial)h(prop)s(erties,)
+f(ev)m(en)h(if)g(it)g(is)f(subsequen)m(tly)g(reset.)150
+2454 y Ft(BASH_VERSINFO)630 2564 y Fu(A)36 b(readonly)g(arra)m(y)g(v)-5
+b(ariable)37 b(\(see)f(Section)h(6.7)g([Arra)m(ys],)h(page)e(95\))h
+(whose)f(mem)m(b)s(ers)630 2673 y(hold)c(v)m(ersion)h(information)f
+(for)g(this)g(instance)h(of)g(Bash.)46 b(The)32 b(v)-5
+b(alues)32 b(assigned)h(to)g(the)630 2783 y(arra)m(y)e(mem)m(b)s(ers)e
+(are)i(as)g(follo)m(ws:)630 2938 y Ft(BASH_VERSINFO[0])1110
+3048 y Fu(The)f(ma)5 b(jor)30 b(v)m(ersion)h(n)m(um)m(b)s(er)e(\(the)i
+Fr(release)5 b Fu(\).)630 3203 y Ft(BASH_VERSINFO[1])1110
+3313 y Fu(The)30 b(minor)g(v)m(ersion)h(n)m(um)m(b)s(er)e(\(the)i
+Fr(v)m(ersion)p Fu(\).)630 3468 y Ft(BASH_VERSINFO[2])1110
+3577 y Fu(The)f(patc)m(h)h(lev)m(el.)630 3733 y Ft(BASH_VERSINFO[3])
+1110 3842 y Fu(The)f(build)f(v)m(ersion.)630 3998 y Ft
+(BASH_VERSINFO[4])1110 4107 y Fu(The)h(release)i(status)e(\(e.g.,)j
+Fr(b)s(eta1)7 b Fu(\).)630 4262 y Ft(BASH_VERSINFO[5])1110
+4372 y Fu(The)30 b(v)-5 b(alue)31 b(of)f Ft(MACHTYPE)p
+Fu(.)150 4527 y Ft(BASH_VERSION)630 4637 y Fu(The)g(v)m(ersion)h(n)m
+(um)m(b)s(er)e(of)h(the)h(curren)m(t)f(instance)h(of)g(Bash.)150
+4792 y Ft(BASH_XTRACEFD)630 4902 y Fu(If)f(set)h(to)h(an)e(in)m(teger)i
+(corresp)s(onding)e(to)h(a)g(v)-5 b(alid)31 b(\014le)g(descriptor,)g
+(Bash)g(will)g(write)g(the)630 5011 y(trace)37 b(output)f(generated)h
+(when)f(`)p Ft(set)29 b(-x)p Fu(')36 b(is)g(enabled)h(to)g(that)f
+(\014le)h(descriptor.)58 b(This)630 5121 y(allo)m(ws)29
+b(tracing)h(output)d(to)i(b)s(e)f(separated)g(from)g(diagnostic)h(and)f
+(error)f(messages.)41 b(The)630 5230 y(\014le)31 b(descriptor)f(is)h
+(closed)g(when)f Ft(BASH_XTRACEFD)d Fu(is)k(unset)f(or)g(assigned)h(a)g
+(new)f(v)-5 b(alue.)630 5340 y(Unsetting)45 b Ft(BASH_XTRACEFD)40
+b Fu(or)k(assigning)g(it)g(the)g(empt)m(y)h(string)e(causes)i(the)f
+(trace)p eop end
+%%Page: 77 83
+TeXDict begin 77 82 bop 150 -116 a Fu(Chapter)30 b(5:)41
+b(Shell)30 b(V)-8 b(ariables)2459 b(77)630 299 y(output)33
+b(to)i(b)s(e)d(sen)m(t)j(to)f(the)g(standard)e(error.)50
+b(Note)35 b(that)g(setting)f Ft(BASH_XTRACEFD)c Fu(to)630
+408 y(2)39 b(\(the)h(standard)e(error)g(\014le)h(descriptor\))h(and)e
+(then)h(unsetting)g(it)g(will)g(result)g(in)g(the)630
+518 y(standard)30 b(error)g(b)s(eing)f(closed.)150 664
+y Ft(CHILD_MAX)630 774 y Fu(Set)35 b(the)h(n)m(um)m(b)s(er)e(of)h
+(exited)h(c)m(hild)g(status)f(v)-5 b(alues)36 b(for)f(the)g(shell)g(to)
+h(remem)m(b)s(er.)55 b(Bash)630 883 y(will)37 b(not)g(allo)m(w)i(this)e
+(v)-5 b(alue)37 b(to)h(b)s(e)e(decreased)i(b)s(elo)m(w)f(a)g
+Fm(posix)p Fu(-mandated)f(minim)m(um,)630 993 y(and)30
+b(there)g(is)g(a)h(maxim)m(um)f(v)-5 b(alue)30 b(\(curren)m(tly)h
+(8192\))h(that)f(this)f(ma)m(y)g(not)h(exceed.)41 b(The)630
+1103 y(minim)m(um)30 b(v)-5 b(alue)30 b(is)h(system-dep)s(enden)m(t.)
+150 1249 y Ft(COLUMNS)144 b Fu(Used)32 b(b)m(y)f(the)h
+Ft(select)e Fu(command)h(to)i(determine)f(the)f(terminal)i(width)d
+(when)h(prin)m(ting)630 1358 y(selection)39 b(lists.)63
+b(Automatically)41 b(set)d(if)f(the)h Ft(checkwinsize)d
+Fu(option)j(is)f(enabled)h(\(see)630 1468 y(Section)44
+b(4.3.2)h([The)e(Shopt)g(Builtin],)k(page)d(66\),)k(or)43
+b(in)g(an)g(in)m(teractiv)m(e)j(shell)e(up)s(on)630 1577
+y(receipt)31 b(of)g(a)g Ft(SIGWINCH)p Fu(.)150 1724 y
+Ft(COMP_CWORD)630 1833 y Fu(An)38 b(index)g(in)m(to)h
+Ft(${COMP_WORDS})c Fu(of)k(the)g(w)m(ord)f(con)m(taining)i(the)e
+(curren)m(t)g(cursor)g(p)s(o-)630 1943 y(sition.)72 b(This)40
+b(v)-5 b(ariable)41 b(is)f(a)m(v)-5 b(ailable)43 b(only)e(in)f(shell)h
+(functions)f(in)m(v)m(ok)m(ed)i(b)m(y)e(the)h(pro-)630
+2052 y(grammable)36 b(completion)g(facilities)i(\(see)e(Section)g(8.6)g
+([Programmable)g(Completion],)630 2162 y(page)31 b(137\).)150
+2308 y Ft(COMP_LINE)630 2418 y Fu(The)38 b(curren)m(t)h(command)f
+(line.)66 b(This)37 b(v)-5 b(ariable)40 b(is)f(a)m(v)-5
+b(ailable)41 b(only)d(in)h(shell)f(functions)630 2527
+y(and)25 b(external)h(commands)f(in)m(v)m(ok)m(ed)h(b)m(y)f(the)h
+(programmable)f(completion)i(facilities)g(\(see)630 2637
+y(Section)k(8.6)h([Programmable)f(Completion],)g(page)g(137\).)150
+2783 y Ft(COMP_POINT)630 2892 y Fu(The)25 b(index)g(of)h(the)g(curren)m
+(t)f(cursor)g(p)s(osition)h(relativ)m(e)i(to)e(the)g(b)s(eginning)f(of)
+g(the)h(curren)m(t)630 3002 y(command.)40 b(If)27 b(the)h(curren)m(t)g
+(cursor)g(p)s(osition)g(is)g(at)g(the)g(end)g(of)g(the)g(curren)m(t)g
+(command,)630 3112 y(the)i(v)-5 b(alue)30 b(of)g(this)g(v)-5
+b(ariable)31 b(is)f(equal)g(to)h Ft(${#COMP_LINE})p Fu(.)37
+b(This)29 b(v)-5 b(ariable)31 b(is)f(a)m(v)-5 b(ailable)630
+3221 y(only)36 b(in)f(shell)h(functions)f(and)g(external)h(commands)g
+(in)m(v)m(ok)m(ed)h(b)m(y)e(the)h(programmable)630 3331
+y(completion)c(facilities)g(\(see)g(Section)f(8.6)g([Programmable)g
+(Completion],)h(page)f(137\).)150 3477 y Ft(COMP_TYPE)630
+3587 y Fu(Set)c(to)h(an)f(in)m(teger)h(v)-5 b(alue)28
+b(corresp)s(onding)e(to)h(the)h(t)m(yp)s(e)f(of)g(completion)h
+(attempted)g(that)630 3696 y(caused)e(a)h(completion)h(function)e(to)h
+(b)s(e)f(called:)40 b Fr(T)-8 b(AB)p Fu(,)27 b(for)g(normal)f
+(completion,)j(`)p Ft(?)p Fu(',)e(for)630 3806 y(listing)35
+b(completions)h(after)f(successiv)m(e)g(tabs,)h(`)p Ft(!)p
+Fu(',)g(for)e(listing)h(alternativ)m(es)i(on)d(partial)630
+3915 y(w)m(ord)22 b(completion,)k(`)p Ft(@)p Fu(',)f(to)e(list)g
+(completions)h(if)f(the)g(w)m(ord)f(is)h(not)g(unmo)s(di\014ed,)f(or)h
+(`)p Ft(\045)p Fu(',)h(for)630 4025 y(men)m(u)i(completion.)41
+b(This)25 b(v)-5 b(ariable)27 b(is)g(a)m(v)-5 b(ailable)28
+b(only)f(in)f(shell)g(functions)g(and)g(external)630
+4134 y(commands)32 b(in)m(v)m(ok)m(ed)i(b)m(y)e(the)g(programmable)h
+(completion)g(facilities)i(\(see)e(Section)g(8.6)630
+4244 y([Programmable)e(Completion],)h(page)f(137\).)150
+4390 y Ft(COMP_KEY)96 b Fu(The)29 b(k)m(ey)i(\(or)g(\014nal)e(k)m(ey)i
+(of)f(a)g(k)m(ey)h(sequence\))g(used)e(to)i(in)m(v)m(ok)m(e)h(the)e
+(curren)m(t)g(completion)630 4500 y(function.)150 4646
+y Ft(COMP_WORDBREAKS)630 4756 y Fu(The)f(set)i(of)e(c)m(haracters)j
+(that)e(the)g(Readline)g(library)g(treats)g(as)g(w)m(ord)g(separators)g
+(when)630 4865 y(p)s(erforming)i(w)m(ord)h(completion.)51
+b(If)33 b Ft(COMP_WORDBREAKS)c Fu(is)34 b(unset,)g(it)f(loses)i(its)e
+(sp)s(ecial)630 4975 y(prop)s(erties,)d(ev)m(en)h(if)f(it)h(is)g
+(subsequen)m(tly)f(reset.)150 5121 y Ft(COMP_WORDS)630
+5230 y Fu(An)36 b(arra)m(y)g(v)-5 b(ariable)37 b(consisting)g(of)f(the)
+g(individual)f(w)m(ords)h(in)f(the)h(curren)m(t)g(command)630
+5340 y(line.)94 b(The)47 b(line)i(is)f(split)g(in)m(to)h(w)m(ords)e(as)
+h(Readline)h(w)m(ould)f(split)g(it,)53 b(using)47 b Ft(COMP_)p
+eop end
+%%Page: 78 84
+TeXDict begin 78 83 bop 150 -116 a Fu(Chapter)30 b(5:)41
+b(Shell)30 b(V)-8 b(ariables)2459 b(78)630 299 y Ft(WORDBREAKS)34
+b Fu(as)i(describ)s(ed)g(ab)s(o)m(v)m(e.)60 b(This)36
+b(v)-5 b(ariable)37 b(is)f(a)m(v)-5 b(ailable)39 b(only)e(in)f(shell)h
+(func-)630 408 y(tions)32 b(in)m(v)m(ok)m(ed)i(b)m(y)d(the)i
+(programmable)f(completion)h(facilities)h(\(see)f(Section)g(8.6)g
+([Pro-)630 518 y(grammable)e(Completion],)g(page)g(137\).)150
+676 y Ft(COMPREPLY)630 786 y Fu(An)37 b(arra)m(y)h(v)-5
+b(ariable)38 b(from)f(whic)m(h)g(Bash)g(reads)g(the)h(p)s(ossible)e
+(completions)j(generated)630 896 y(b)m(y)33 b(a)g(shell)h(function)f
+(in)m(v)m(ok)m(ed)h(b)m(y)f(the)g(programmable)h(completion)g(facilit)m
+(y)h(\(see)f(Sec-)630 1005 y(tion)g(8.6)g([Programmable)g(Completion],)
+h(page)f(137\).)51 b(Eac)m(h)34 b(arra)m(y)g(elemen)m(t)h(con)m(tains)
+630 1115 y(one)c(p)s(ossible)f(completion.)150 1273 y
+Ft(COPROC)192 b Fu(An)27 b(arra)m(y)g(v)-5 b(ariable)28
+b(created)g(to)f(hold)g(the)g(\014le)g(descriptors)g(for)g(output)f
+(from)h(and)f(input)630 1383 y(to)31 b(an)f(unnamed)f(copro)s(cess)i
+(\(see)g(Section)h(3.2.6)g([Copro)s(cesses],)f(page)g(15\).)150
+1541 y Ft(DIRSTACK)96 b Fu(An)26 b(arra)m(y)h(v)-5 b(ariable)28
+b(con)m(taining)g(the)f(curren)m(t)f(con)m(ten)m(ts)j(of)e(the)f
+(directory)i(stac)m(k.)41 b(Direc-)630 1650 y(tories)33
+b(app)s(ear)f(in)g(the)h(stac)m(k)h(in)e(the)h(order)f(they)h(are)g
+(displa)m(y)m(ed)g(b)m(y)f(the)h Ft(dirs)e Fu(builtin.)630
+1760 y(Assigning)f(to)h(mem)m(b)s(ers)f(of)g(this)g(arra)m(y)g(v)-5
+b(ariable)31 b(ma)m(y)g(b)s(e)e(used)h(to)h(mo)s(dify)e(directories)630
+1870 y(already)41 b(in)f(the)h(stac)m(k,)k(but)40 b(the)h
+Ft(pushd)e Fu(and)h Ft(popd)f Fu(builtins)h(m)m(ust)h(b)s(e)e(used)h
+(to)i(add)630 1979 y(and)37 b(remo)m(v)m(e)h(directories.)63
+b(Assignmen)m(t)37 b(to)h(this)f(v)-5 b(ariable)38 b(will)g(not)f(c)m
+(hange)i(the)e(cur-)630 2089 y(ren)m(t)c(directory)-8
+b(.)47 b(If)32 b Ft(DIRSTACK)e Fu(is)i(unset,)g(it)h(loses)g(its)g(sp)s
+(ecial)g(prop)s(erties,)f(ev)m(en)h(if)f(it)h(is)630
+2198 y(subsequen)m(tly)d(reset.)150 2357 y Ft(EMACS)240
+b Fu(If)31 b(Bash)h(\014nds)d(this)j(v)-5 b(ariable)32
+b(in)f(the)h(en)m(vironmen)m(t)g(when)e(the)i(shell)f(starts)h(with)f
+(v)-5 b(alue)630 2466 y(`)p Ft(t)p Fu(',)36 b(it)f(assumes)f(that)h
+(the)g(shell)f(is)h(running)e(in)h(an)g(Emacs)h(shell)g(bu\013er)e(and)
+h(disables)630 2576 y(line)d(editing.)150 2734 y Ft(ENV)336
+b Fu(Expanded)30 b(and)h(executed)h(similarlt)m(y)g(to)g
+Ft(BASH_ENV)d Fu(\(see)k(Section)f(6.2)g([Bash)g(Startup)630
+2844 y(Files],)39 b(page)e(88\))h(when)d(an)h(in)m(teractiv)m(e)j
+(shell)d(is)h(in)m(v)m(ok)m(ed)g(in)f Fm(posix)g Fu(Mo)s(de)g(\(see)h
+(Sec-)630 2953 y(tion)31 b(6.11)h([Bash)f(POSIX)e(Mo)s(de],)i(page)g
+(101\).)150 3112 y Ft(EPOCHREALTIME)630 3221 y Fu(Eac)m(h)38
+b(time)f(this)g(parameter)h(is)f(referenced,)i(it)f(expands)e(to)i(the)
+f(n)m(um)m(b)s(er)f(of)h(seconds)630 3331 y(since)f(the)g(Unix)f(Ep)s
+(o)s(c)m(h)g(as)h(a)g(\015oating)h(p)s(oin)m(t)f(v)-5
+b(alue)36 b(with)f(micro-second)i(gran)m(ularit)m(y)630
+3440 y(\(see)42 b(the)g(do)s(cumen)m(tation)g(for)f(the)g(C)g(library)g
+(function)g Fr(time)47 b Fu(for)41 b(the)h(de\014nition)f(of)630
+3550 y(Ep)s(o)s(c)m(h\).)82 b(Assignmen)m(ts)44 b(to)h
+Ft(EPOCHREALTIME)c Fu(are)j(ignored.)83 b(If)43 b Ft(EPOCHREALTIME)e
+Fu(is)630 3660 y(unset,)30 b(it)h(loses)g(its)g(sp)s(ecial)g(prop)s
+(erties,)f(ev)m(en)h(if)f(it)h(is)g(subsequen)m(tly)f(reset.)150
+3818 y Ft(EPOCHSECONDS)630 3927 y Fu(Eac)m(h)38 b(time)f(this)g
+(parameter)h(is)f(referenced,)i(it)f(expands)e(to)i(the)f(n)m(um)m(b)s
+(er)f(of)h(seconds)630 4037 y(since)e(the)g(Unix)f(Ep)s(o)s(c)m(h)g
+(\(see)i(the)f(do)s(cumen)m(tation)g(for)g(the)f(C)h(library)f
+(function)g Fr(time)630 4147 y Fu(for)41 b(the)g(de\014nition)g(of)h
+(Ep)s(o)s(c)m(h\).)73 b(Assignmen)m(ts)41 b(to)h Ft(EPOCHSECONDS)c
+Fu(are)k(ignored.)73 b(If)630 4256 y Ft(EPOCHSECONDS)27
+b Fu(is)j(unset,)g(it)g(loses)h(its)g(sp)s(ecial)f(prop)s(erties,)g(ev)
+m(en)h(if)f(it)g(is)g(subsequen)m(tly)630 4366 y(reset.)150
+4524 y Ft(EUID)288 b Fu(The)30 b(n)m(umeric)g(e\013ectiv)m(e)j(user)d
+(id)g(of)g(the)h(curren)m(t)f(user.)40 b(This)30 b(v)-5
+b(ariable)31 b(is)f(readonly)-8 b(.)150 4682 y Ft(EXECIGNORE)630
+4792 y Fu(A)29 b(colon-separated)h(list)f(of)g(shell)g(patterns)f
+(\(see)i(Section)f(3.5.8.1)i([P)m(attern)f(Matc)m(hing],)630
+4902 y(page)j(33\))g(de\014ning)e(the)h(list)g(of)g(\014lenames)g(to)g
+(b)s(e)g(ignored)g(b)m(y)f(command)h(searc)m(h)g(using)630
+5011 y Ft(PATH)p Fu(.)k(Files)22 b(whose)f(full)g(pathnames)g(matc)m(h)
+h(one)f(of)g(these)h(patterns)e(are)i(not)f(considered)630
+5121 y(executable)j(\014les)e(for)g(the)h(purp)s(oses)d(of)j
+(completion)h(and)d(command)i(execution)g(via)g Ft(PATH)630
+5230 y Fu(lo)s(okup.)56 b(This)35 b(do)s(es)g(not)h(a\013ect)i(the)d(b)
+s(eha)m(vior)h(of)g(the)g Ft([)p Fu(,)h Ft(test)p Fu(,)f(and)f
+Ft([[)g Fu(commands.)630 5340 y(F)-8 b(ull)42 b(pathnames)e(in)h(the)g
+(command)g(hash)f(table)i(are)g(not)f(sub)5 b(ject)41
+b(to)g Ft(EXECIGNORE)p Fu(.)p eop end
+%%Page: 79 85
+TeXDict begin 79 84 bop 150 -116 a Fu(Chapter)30 b(5:)41
+b(Shell)30 b(V)-8 b(ariables)2459 b(79)630 299 y(Use)30
+b(this)f(v)-5 b(ariable)30 b(to)g(ignore)g(shared)f(library)g(\014les)g
+(that)h(ha)m(v)m(e)h(the)f(executable)h(bit)e(set,)630
+408 y(but)36 b(are)h(not)g(executable)i(\014les.)60 b(The)36
+b(pattern)h(matc)m(hing)h(honors)e(the)h(setting)h(of)f(the)630
+518 y Ft(extglob)28 b Fu(shell)j(option.)150 679 y Ft(FCEDIT)192
+b Fu(The)30 b(editor)h(used)e(as)i(a)g(default)f(b)m(y)h(the)f
+Ft(-e)g Fu(option)h(to)g(the)f Ft(fc)g Fu(builtin)g(command.)150
+840 y Ft(FIGNORE)144 b Fu(A)35 b(colon-separated)i(list)f(of)g
+(su\016xes)e(to)i(ignore)g(when)e(p)s(erforming)g(\014lename)i(comple-)
+630 950 y(tion.)k(A)27 b(\014lename)g(whose)f(su\016x)g(matc)m(hes)i
+(one)f(of)g(the)g(en)m(tries)g(in)g Ft(FIGNORE)d Fu(is)j(excluded)630
+1060 y(from)j(the)g(list)h(of)g(matc)m(hed)g(\014lenames.)41
+b(A)30 b(sample)h(v)-5 b(alue)31 b(is)f(`)p Ft(.o:~)p
+Fu(')150 1221 y Ft(FUNCNAME)96 b Fu(An)35 b(arra)m(y)i(v)-5
+b(ariable)36 b(con)m(taining)h(the)f(names)g(of)g(all)g(shell)g
+(functions)g(curren)m(tly)f(in)h(the)630 1330 y(execution)g(call)h
+(stac)m(k.)57 b(The)34 b(elemen)m(t)j(with)e(index)g(0)h(is)f(the)g
+(name)h(of)f(an)m(y)h(curren)m(tly-)630 1440 y(executing)f(shell)f
+(function.)51 b(The)34 b(b)s(ottom-most)h(elemen)m(t)g(\(the)g(one)f
+(with)g(the)g(highest)630 1549 y(index\))e(is)h Ft("main")p
+Fu(.)44 b(This)32 b(v)-5 b(ariable)33 b(exists)g(only)g(when)e(a)i
+(shell)f(function)g(is)g(executing.)630 1659 y(Assignmen)m(ts)23
+b(to)f Ft(FUNCNAME)e Fu(ha)m(v)m(e)k(no)e(e\013ect.)39
+b(If)22 b Ft(FUNCNAME)e Fu(is)i(unset,)h(it)g(loses)g(its)f(sp)s(ecial)
+630 1769 y(prop)s(erties,)30 b(ev)m(en)h(if)f(it)h(is)g(subsequen)m
+(tly)f(reset.)630 1904 y(This)h(v)-5 b(ariable)32 b(can)f(b)s(e)g(used)
+g(with)g Ft(BASH_LINENO)d Fu(and)j Ft(BASH_SOURCE)p Fu(.)40
+b(Eac)m(h)32 b(elemen)m(t)630 2014 y(of)g Ft(FUNCNAME)d
+Fu(has)j(corresp)s(onding)e(elemen)m(ts)j(in)f Ft(BASH_LINENO)c
+Fu(and)k Ft(BASH_SOURCE)c Fu(to)630 2123 y(describ)s(e)39
+b(the)h(call)h(stac)m(k.)70 b(F)-8 b(or)41 b(instance,)i
+Ft(${FUNCNAME[$i]})35 b Fu(w)m(as)41 b(called)f(from)g(the)630
+2233 y(\014le)27 b Ft(${BASH_SOURCE[$i+1]})21 b Fu(at)27
+b(line)h(n)m(um)m(b)s(er)d Ft(${BASH_LINENO[$i]})p Fu(.)34
+b(The)27 b Ft(caller)630 2342 y Fu(builtin)j(displa)m(ys)g(the)h
+(curren)m(t)f(call)i(stac)m(k)g(using)d(this)i(information.)150
+2504 y Ft(FUNCNEST)96 b Fu(If)34 b(set)i(to)f(a)h(n)m(umeric)e(v)-5
+b(alue)36 b(greater)g(than)e(0,)j(de\014nes)d(a)h(maxim)m(um)g
+(function)g(nesting)630 2613 y(lev)m(el.)42 b(F)-8 b(unction)29
+b(in)m(v)m(o)s(cations)h(that)f(exceed)h(this)e(nesting)h(lev)m(el)h
+(will)f(cause)g(the)f(curren)m(t)630 2723 y(command)i(to)h(ab)s(ort.)
+150 2884 y Ft(GLOBIGNORE)630 2993 y Fu(A)k(colon-separated)i(list)f(of)
+f(patterns)g(de\014ning)f(the)i(set)f(of)g(\014le)h(names)f(to)g(b)s(e)
+g(ignored)630 3103 y(b)m(y)28 b(\014lename)h(expansion.)40
+b(If)28 b(a)h(\014le)g(name)g(matc)m(hed)g(b)m(y)g(a)g(\014lename)f
+(expansion)h(pattern)630 3213 y(also)k(matc)m(hes)g(one)f(of)g(the)g
+(patterns)g(in)f Ft(GLOBIGNORE)p Fu(,)f(it)i(is)g(remo)m(v)m(ed)h(from)
+e(the)h(list)h(of)630 3322 y(matc)m(hes.)41 b(The)27
+b(pattern)g(matc)m(hing)h(honors)f(the)g(setting)i(of)e(the)h
+Ft(extglob)d Fu(shell)i(option.)150 3483 y Ft(GROUPS)192
+b Fu(An)36 b(arra)m(y)g(v)-5 b(ariable)37 b(con)m(taining)g(the)f(list)
+h(of)f(groups)g(of)g(whic)m(h)f(the)i(curren)m(t)e(user)h(is)g(a)630
+3593 y(mem)m(b)s(er.)41 b(Assignmen)m(ts)30 b(to)i Ft(GROUPS)d
+Fu(ha)m(v)m(e)i(no)g(e\013ect.)42 b(If)30 b Ft(GROUPS)f
+Fu(is)i(unset,)f(it)h(loses)h(its)630 3703 y(sp)s(ecial)f(prop)s
+(erties,)f(ev)m(en)h(if)f(it)h(is)g(subsequen)m(tly)f(reset.)150
+3864 y Ft(histchars)630 3973 y Fu(Up)c(to)g(three)g(c)m(haracters)i
+(whic)m(h)d(con)m(trol)j(history)d(expansion,)i(quic)m(k)g
+(substitution,)g(and)630 4083 y(tok)m(enization)k(\(see)f(Section)f
+(9.3)h([History)f(In)m(teraction],)i(page)f(148\).)41
+b(The)29 b(\014rst)e(c)m(harac-)630 4193 y(ter)j(is)f(the)g
+Fr(history)g(expansion)g Fu(c)m(haracter,)j(that)e(is,)f(the)h(c)m
+(haracter)h(whic)m(h)d(signi\014es)i(the)630 4302 y(start)25
+b(of)f(a)h(history)f(expansion,)i(normally)e(`)p Ft(!)p
+Fu('.)39 b(The)24 b(second)g(c)m(haracter)i(is)e(the)g(c)m(haracter)630
+4412 y(whic)m(h)36 b(signi\014es)g(`quic)m(k)h(substitution')f(when)f
+(seen)h(as)g(the)g(\014rst)f(c)m(haracter)j(on)e(a)g(line,)630
+4521 y(normally)27 b(`)p Ft(^)p Fu('.)39 b(The)26 b(optional)i(third)d
+(c)m(haracter)j(is)e(the)h(c)m(haracter)h(whic)m(h)e(indicates)h(that)
+630 4631 y(the)34 b(remainder)f(of)h(the)g(line)g(is)f(a)h(commen)m(t)h
+(when)e(found)f(as)i(the)g(\014rst)f(c)m(haracter)i(of)f(a)630
+4740 y(w)m(ord,)i(usually)f(`)p Ft(#)p Fu('.)55 b(The)34
+b(history)h(commen)m(t)h(c)m(haracter)h(causes)e(history)g
+(substitution)630 4850 y(to)27 b(b)s(e)f(skipp)s(ed)f(for)i(the)f
+(remaining)h(w)m(ords)f(on)h(the)f(line.)40 b(It)27 b(do)s(es)f(not)h
+(necessarily)g(cause)630 4960 y(the)k(shell)f(parser)g(to)h(treat)g
+(the)g(rest)g(of)f(the)h(line)f(as)h(a)g(commen)m(t.)150
+5121 y Ft(HISTCMD)144 b Fu(The)44 b(history)h(n)m(um)m(b)s(er,)j(or)d
+(index)g(in)f(the)h(history)g(list,)50 b(of)45 b(the)g(curren)m(t)g
+(command.)630 5230 y(Assignmen)m(ts)37 b(to)h Ft(HISTCMD)d
+Fu(are)j(ignored.)61 b(If)37 b Ft(HISTCMD)e Fu(is)i(unset,)h(it)g
+(loses)g(its)f(sp)s(ecial)630 5340 y(prop)s(erties,)30
+b(ev)m(en)h(if)f(it)h(is)g(subsequen)m(tly)f(reset.)p
+eop end
+%%Page: 80 86
+TeXDict begin 80 85 bop 150 -116 a Fu(Chapter)30 b(5:)41
+b(Shell)30 b(V)-8 b(ariables)2459 b(80)150 299 y Ft(HISTCONTROL)630
+408 y Fu(A)40 b(colon-separated)i(list)f(of)f(v)-5 b(alues)40
+b(con)m(trolling)i(ho)m(w)e(commands)g(are)h(sa)m(v)m(ed)g(on)f(the)630
+518 y(history)29 b(list.)41 b(If)28 b(the)h(list)h(of)f(v)-5
+b(alues)29 b(includes)f(`)p Ft(ignorespace)p Fu(',)f(lines)i(whic)m(h)g
+(b)s(egin)f(with)630 628 y(a)39 b(space)g(c)m(haracter)i(are)e(not)g
+(sa)m(v)m(ed)g(in)g(the)g(history)f(list.)66 b(A)39 b(v)-5
+b(alue)39 b(of)g(`)p Ft(ignoredups)p Fu(')630 737 y(causes)34
+b(lines)h(whic)m(h)f(matc)m(h)h(the)f(previous)f(history)h(en)m(try)h
+(to)g(not)f(b)s(e)f(sa)m(v)m(ed.)53 b(A)34 b(v)-5 b(alue)630
+847 y(of)32 b(`)p Ft(ignoreboth)p Fu(')d(is)j(shorthand)e(for)i(`)p
+Ft(ignorespace)p Fu(')d(and)i(`)p Ft(ignoredups)p Fu('.)42
+b(A)32 b(v)-5 b(alue)32 b(of)630 956 y(`)p Ft(erasedups)p
+Fu(')f(causes)i(all)h(previous)f(lines)g(matc)m(hing)h(the)f(curren)m
+(t)g(line)g(to)h(b)s(e)e(remo)m(v)m(ed)630 1066 y(from)42
+b(the)h(history)f(list)i(b)s(efore)e(that)h(line)g(is)g(sa)m(v)m(ed.)78
+b(An)m(y)43 b(v)-5 b(alue)43 b(not)g(in)f(the)h(ab)s(o)m(v)m(e)630
+1176 y(list)35 b(is)g(ignored.)53 b(If)34 b Ft(HISTCONTROL)e
+Fu(is)i(unset,)i(or)e(do)s(es)h(not)g(include)f(a)h(v)-5
+b(alid)35 b(v)-5 b(alue,)36 b(all)630 1285 y(lines)30
+b(read)g(b)m(y)g(the)g(shell)g(parser)g(are)g(sa)m(v)m(ed)h(on)f(the)g
+(history)g(list,)h(sub)5 b(ject)30 b(to)g(the)g(v)-5
+b(alue)630 1395 y(of)42 b Ft(HISTIGNORE)p Fu(.)73 b(The)42
+b(second)g(and)g(subsequen)m(t)f(lines)h(of)h(a)f(m)m(ulti-line)h(comp)
+s(ound)630 1504 y(command)33 b(are)h(not)g(tested,)i(and)d(are)h(added)
+f(to)h(the)g(history)g(regardless)g(of)g(the)f(v)-5 b(alue)630
+1614 y(of)31 b Ft(HISTCONTROL)p Fu(.)150 1763 y Ft(HISTFILE)96
+b Fu(The)27 b(name)h(of)g(the)g(\014le)g(to)h(whic)m(h)f(the)g(command)
+f(history)h(is)g(sa)m(v)m(ed.)41 b(The)27 b(default)h(v)-5
+b(alue)630 1873 y(is)30 b Ft(~/.bash_history)p Fu(.)150
+2022 y Ft(HISTFILESIZE)630 2132 y Fu(The)c(maxim)m(um)f(n)m(um)m(b)s
+(er)g(of)h(lines)h(con)m(tained)g(in)f(the)g(history)g(\014le.)39
+b(When)26 b(this)g(v)-5 b(ariable)630 2242 y(is)25 b(assigned)h(a)g(v)
+-5 b(alue,)27 b(the)f(history)f(\014le)h(is)f(truncated,)i(if)e
+(necessary)-8 b(,)28 b(to)e(con)m(tain)g(no)g(more)630
+2351 y(than)37 b(that)h(n)m(um)m(b)s(er)d(of)j(lines)f(b)m(y)g(remo)m
+(ving)h(the)f(oldest)h(en)m(tries.)62 b(The)37 b(history)g(\014le)g(is)
+630 2461 y(also)i(truncated)f(to)h(this)e(size)i(after)g(writing)f(it)g
+(when)f(a)h(shell)h(exits.)64 b(If)37 b(the)h(v)-5 b(alue)39
+b(is)630 2570 y(0,)g(the)e(history)f(\014le)h(is)g(truncated)f(to)i
+(zero)f(size.)60 b(Non-n)m(umeric)37 b(v)-5 b(alues)37
+b(and)f(n)m(umeric)630 2680 y(v)-5 b(alues)31 b(less)f(than)g(zero)h
+(inhibit)f(truncation.)41 b(The)29 b(shell)i(sets)f(the)h(default)f(v)
+-5 b(alue)31 b(to)g(the)630 2790 y(v)-5 b(alue)31 b(of)f
+Ft(HISTSIZE)f Fu(after)h(reading)h(an)m(y)g(startup)f(\014les.)150
+2939 y Ft(HISTIGNORE)630 3049 y Fu(A)j(colon-separated)h(list)f(of)g
+(patterns)f(used)g(to)h(decide)g(whic)m(h)f(command)g(lines)h(should)
+630 3158 y(b)s(e)f(sa)m(v)m(ed)h(on)g(the)f(history)h(list.)47
+b(Eac)m(h)33 b(pattern)g(is)f(anc)m(hored)h(at)g(the)f(b)s(eginning)g
+(of)h(the)630 3268 y(line)43 b(and)e(m)m(ust)h(matc)m(h)h(the)g
+(complete)h(line)e(\(no)h(implicit)g(`)p Ft(*)p Fu(')f(is)g(app)s
+(ended\).)75 b(Eac)m(h)630 3377 y(pattern)42 b(is)g(tested)g(against)h
+(the)f(line)g(after)g(the)g(c)m(hec)m(ks)h(sp)s(eci\014ed)e(b)m(y)h
+Ft(HISTCONTROL)630 3487 y Fu(are)37 b(applied.)59 b(In)36
+b(addition)h(to)g(the)g(normal)g(shell)f(pattern)h(matc)m(hing)h(c)m
+(haracters,)i(`)p Ft(&)p Fu(')630 3597 y(matc)m(hes)d(the)f(previous)g
+(history)g(line.)57 b(`)p Ft(&)p Fu(')36 b(ma)m(y)h(b)s(e)e(escap)s(ed)
+h(using)g(a)g(bac)m(kslash;)k(the)630 3706 y(bac)m(kslash)34
+b(is)g(remo)m(v)m(ed)h(b)s(efore)e(attempting)i(a)g(matc)m(h.)51
+b(The)34 b(second)f(and)h(subsequen)m(t)630 3816 y(lines)e(of)h(a)g(m)m
+(ulti-line)g(comp)s(ound)e(command)h(are)h(not)f(tested,)i(and)e(are)g
+(added)g(to)h(the)630 3925 y(history)k(regardless)h(of)f(the)g(v)-5
+b(alue)38 b(of)f Ft(HISTIGNORE)p Fu(.)58 b(The)37 b(pattern)g(matc)m
+(hing)i(honors)630 4035 y(the)31 b(setting)g(of)g(the)f
+Ft(extglob)f Fu(shell)h(option.)630 4164 y Ft(HISTIGNORE)20
+b Fu(subsumes)g(the)j(function)f(of)h Ft(HISTCONTROL)p
+Fu(.)35 b(A)23 b(pattern)f(of)h(`)p Ft(&)p Fu(')g(is)f(iden)m(tical)630
+4274 y(to)k Ft(ignoredups)p Fu(,)e(and)h(a)h(pattern)g(of)f(`)p
+Ft([)31 b(]*)p Fu(')25 b(is)h(iden)m(tical)h(to)f Ft(ignorespace)p
+Fu(.)36 b(Com)m(bining)630 4384 y(these)30 b(t)m(w)m(o)h(patterns,)f
+(separating)g(them)g(with)f(a)h(colon,)h(pro)m(vides)e(the)h
+(functionalit)m(y)h(of)630 4493 y Ft(ignoreboth)p Fu(.)150
+4643 y Ft(HISTSIZE)96 b Fu(The)37 b(maxim)m(um)g(n)m(um)m(b)s(er)e(of)j
+(commands)f(to)g(remem)m(b)s(er)g(on)g(the)g(history)g(list.)62
+b(If)37 b(the)630 4752 y(v)-5 b(alue)26 b(is)g(0,)i(commands)d(are)h
+(not)h(sa)m(v)m(ed)g(in)e(the)h(history)g(list.)40 b(Numeric)26
+b(v)-5 b(alues)26 b(less)g(than)630 4862 y(zero)i(result)e(in)h(ev)m
+(ery)g(command)g(b)s(eing)f(sa)m(v)m(ed)i(on)f(the)g(history)f(list)i
+(\(there)f(is)g(no)g(limit\).)630 4971 y(The)j(shell)g(sets)h(the)g
+(default)f(v)-5 b(alue)31 b(to)g(500)h(after)f(reading)f(an)m(y)h
+(startup)f(\014les.)150 5121 y Ft(HISTTIMEFORMAT)630
+5230 y Fu(If)44 b(this)g(v)-5 b(ariable)45 b(is)f(set)g(and)g(not)g(n)m
+(ull,)k(its)d(v)-5 b(alue)44 b(is)g(used)g(as)g(a)h(format)f(string)g
+(for)630 5340 y Fr(strftime)c Fu(to)35 b(prin)m(t)f(the)h(time)g(stamp)
+f(asso)s(ciated)i(with)f(eac)m(h)g(history)g(en)m(try)f(displa)m(y)m
+(ed)p eop end
+%%Page: 81 87
+TeXDict begin 81 86 bop 150 -116 a Fu(Chapter)30 b(5:)41
+b(Shell)30 b(V)-8 b(ariables)2459 b(81)630 299 y(b)m(y)34
+b(the)f Ft(history)f Fu(builtin.)50 b(If)33 b(this)h(v)-5
+b(ariable)34 b(is)g(set,)h(time)f(stamps)g(are)g(written)f(to)i(the)630
+408 y(history)26 b(\014le)g(so)g(they)g(ma)m(y)h(b)s(e)e(preserv)m(ed)g
+(across)i(shell)f(sessions.)39 b(This)25 b(uses)h(the)g(history)630
+518 y(commen)m(t)31 b(c)m(haracter)h(to)f(distinguish)f(timestamps)h
+(from)f(other)g(history)h(lines.)150 687 y Ft(HOSTFILE)96
+b Fu(Con)m(tains)33 b(the)g(name)f(of)h(a)g(\014le)f(in)g(the)h(same)g
+(format)g(as)f Ft(/etc/hosts)e Fu(that)j(should)f(b)s(e)630
+797 y(read)21 b(when)g(the)g(shell)h(needs)f(to)h(complete)h(a)e
+(hostname.)38 b(The)21 b(list)h(of)g(p)s(ossible)f(hostname)630
+907 y(completions)27 b(ma)m(y)f(b)s(e)f(c)m(hanged)h(while)f(the)h
+(shell)g(is)f(running;)h(the)g(next)f(time)i(hostname)630
+1016 y(completion)33 b(is)g(attempted)g(after)g(the)f(v)-5
+b(alue)33 b(is)f(c)m(hanged,)i(Bash)e(adds)f(the)i(con)m(ten)m(ts)h(of)
+630 1126 y(the)h(new)f(\014le)g(to)h(the)g(existing)h(list.)53
+b(If)34 b Ft(HOSTFILE)e Fu(is)j(set,)h(but)e(has)g(no)h(v)-5
+b(alue,)36 b(or)e(do)s(es)630 1235 y(not)d(name)f(a)h(readable)g
+(\014le,)g(Bash)f(attempts)i(to)f(read)f Ft(/etc/hosts)e
+Fu(to)j(obtain)g(the)f(list)630 1345 y(of)h(p)s(ossible)f(hostname)h
+(completions.)43 b(When)31 b Ft(HOSTFILE)d Fu(is)j(unset,)f(the)h
+(hostname)g(list)630 1455 y(is)f(cleared.)150 1624 y
+Ft(HOSTNAME)96 b Fu(The)30 b(name)g(of)h(the)f(curren)m(t)h(host.)150
+1793 y Ft(HOSTTYPE)96 b Fu(A)30 b(string)h(describing)f(the)g(mac)m
+(hine)h(Bash)g(is)f(running)f(on.)150 1963 y Ft(IGNOREEOF)630
+2072 y Fu(Con)m(trols)e(the)h(action)g(of)f(the)g(shell)g(on)g(receipt)
+h(of)f(an)g Ft(EOF)f Fu(c)m(haracter)i(as)g(the)f(sole)h(input.)630
+2182 y(If)i(set,)i(the)f(v)-5 b(alue)32 b(denotes)f(the)g(n)m(um)m(b)s
+(er)f(of)h(consecutiv)m(e)i Ft(EOF)d Fu(c)m(haracters)i(that)f(can)h(b)
+s(e)630 2291 y(read)40 b(as)f(the)h(\014rst)f(c)m(haracter)i(on)f(an)f
+(input)g(line)h(b)s(efore)f(the)h(shell)g(will)g(exit.)70
+b(If)39 b(the)630 2401 y(v)-5 b(ariable)39 b(exists)f(but)g(do)s(es)f
+(not)h(ha)m(v)m(e)h(a)g(n)m(umeric)f(v)-5 b(alue,)40
+b(or)e(has)g(no)g(v)-5 b(alue,)40 b(then)e(the)630 2511
+y(default)31 b(is)g(10.)43 b(If)30 b(the)h(v)-5 b(ariable)31
+b(do)s(es)g(not)g(exist,)h(then)e Ft(EOF)g Fu(signi\014es)h(the)g(end)f
+(of)h(input)630 2620 y(to)g(the)g(shell.)41 b(This)29
+b(is)i(only)f(in)g(e\013ect)i(for)e(in)m(teractiv)m(e)j(shells.)150
+2790 y Ft(INPUTRC)144 b Fu(The)68 b(name)h(of)f(the)h(Readline)g
+(initialization)j(\014le,)78 b(o)m(v)m(erriding)69 b(the)g(default)g
+(of)630 2899 y Ft(~/.inputrc)p Fu(.)150 3068 y Ft(INSIDE_EMACS)630
+3178 y Fu(If)29 b(Bash)h(\014nds)e(this)h(v)-5 b(ariable)31
+b(in)e(the)h(en)m(vironmen)m(t)g(when)e(the)i(shell)g(starts,)g(it)g
+(assumes)630 3288 y(that)i(the)g(shell)g(is)f(running)f(in)i(an)f
+(Emacs)h(shell)g(bu\013er)e(and)h(ma)m(y)i(disable)e(line)h(editing)630
+3397 y(dep)s(ending)d(on)h(the)h(v)-5 b(alue)31 b(of)f
+Ft(TERM)p Fu(.)150 3567 y Ft(LANG)288 b Fu(Used)28 b(to)h(determine)f
+(the)g(lo)s(cale)h(category)h(for)e(an)m(y)h(category)h(not)e(sp)s
+(eci\014cally)g(selected)630 3676 y(with)i(a)h(v)-5 b(ariable)31
+b(starting)g(with)f Ft(LC_)p Fu(.)150 3846 y Ft(LC_ALL)192
+b Fu(This)28 b(v)-5 b(ariable)29 b(o)m(v)m(errides)h(the)f(v)-5
+b(alue)29 b(of)g Ft(LANG)f Fu(and)g(an)m(y)h(other)g
+Ft(LC_)f Fu(v)-5 b(ariable)29 b(sp)s(ecifying)630 3955
+y(a)i(lo)s(cale)h(category)-8 b(.)150 4125 y Ft(LC_COLLATE)630
+4234 y Fu(This)37 b(v)-5 b(ariable)38 b(determines)g(the)g(collation)i
+(order)d(used)g(when)f(sorting)i(the)g(results)g(of)630
+4344 y(\014lename)e(expansion,)i(and)e(determines)g(the)h(b)s(eha)m
+(vior)f(of)g(range)h(expressions,)h(equiv-)630 4453 y(alence)e
+(classes,)h(and)e(collating)i(sequences)e(within)f(\014lename)h
+(expansion)g(and)f(pattern)630 4563 y(matc)m(hing)d(\(see)h(Section)f
+(3.5.8)h([Filename)g(Expansion],)e(page)h(33\).)150 4732
+y Ft(LC_CTYPE)96 b Fu(This)36 b(v)-5 b(ariable)37 b(determines)f(the)h
+(in)m(terpretation)h(of)f(c)m(haracters)h(and)e(the)g(b)s(eha)m(vior)h
+(of)630 4842 y(c)m(haracter)46 b(classes)g(within)e(\014lename)h
+(expansion)g(and)f(pattern)h(matc)m(hing)h(\(see)f(Sec-)630
+4951 y(tion)31 b(3.5.8)h([Filename)g(Expansion],)e(page)h(33\).)150
+5121 y Ft(LC_MESSAGES)630 5230 y Fu(This)25 b(v)-5 b(ariable)27
+b(determines)f(the)g(lo)s(cale)i(used)d(to)i(translate)g(double-quoted)
+f(strings)g(pre-)630 5340 y(ceded)31 b(b)m(y)f(a)h(`)p
+Ft($)p Fu(')f(\(see)h(Section)h(3.1.2.5)g([Lo)s(cale)g(T)-8
+b(ranslation],)32 b(page)f(7\).)p eop end
+%%Page: 82 88
+TeXDict begin 82 87 bop 150 -116 a Fu(Chapter)30 b(5:)41
+b(Shell)30 b(V)-8 b(ariables)2459 b(82)150 299 y Ft(LC_NUMERIC)630
+408 y Fu(This)30 b(v)-5 b(ariable)31 b(determines)f(the)h(lo)s(cale)h
+(category)g(used)e(for)g(n)m(um)m(b)s(er)f(formatting.)150
+573 y Ft(LC_TIME)144 b Fu(This)25 b(v)-5 b(ariable)26
+b(determines)g(the)g(lo)s(cale)h(category)h(used)d(for)g(data)h(and)f
+(time)i(formatting.)150 737 y Ft(LINENO)192 b Fu(The)32
+b(line)h(n)m(um)m(b)s(er)e(in)i(the)f(script)h(or)f(shell)h(function)f
+(curren)m(tly)h(executing.)49 b(If)32 b Ft(LINENO)630
+847 y Fu(is)e(unset,)h(it)g(loses)g(its)f(sp)s(ecial)h(prop)s(erties,)f
+(ev)m(en)h(if)g(it)g(is)f(subsequen)m(tly)g(reset.)150
+1011 y Ft(LINES)240 b Fu(Used)43 b(b)m(y)g(the)g Ft(select)e
+Fu(command)i(to)g(determine)g(the)g(column)g(length)g(for)g(prin)m
+(ting)630 1121 y(selection)c(lists.)63 b(Automatically)41
+b(set)d(if)f(the)h Ft(checkwinsize)d Fu(option)j(is)f(enabled)h(\(see)
+630 1230 y(Section)44 b(4.3.2)h([The)e(Shopt)g(Builtin],)k(page)d
+(66\),)k(or)43 b(in)g(an)g(in)m(teractiv)m(e)j(shell)e(up)s(on)630
+1340 y(receipt)31 b(of)g(a)g Ft(SIGWINCH)p Fu(.)150 1504
+y Ft(MACHTYPE)96 b Fu(A)26 b(string)g(that)h(fully)f(describ)s(es)f
+(the)h(system)g(t)m(yp)s(e)h(on)f(whic)m(h)f(Bash)i(is)f(executing,)i
+(in)e(the)630 1614 y(standard)k Fm(gnu)g Fr(cpu-compan)m(y-system)h
+Fu(format.)150 1778 y Ft(MAILCHECK)630 1888 y Fu(Ho)m(w)d(often)g(\(in)
+g(seconds\))g(that)g(the)f(shell)h(should)f(c)m(hec)m(k)i(for)e(mail)h
+(in)f(the)h(\014les)g(sp)s(eci\014ed)630 1998 y(in)i(the)h
+Ft(MAILPATH)e Fu(or)i Ft(MAIL)e Fu(v)-5 b(ariables.)43
+b(The)30 b(default)h(is)f(60)i(seconds.)42 b(When)30
+b(it)h(is)g(time)630 2107 y(to)37 b(c)m(hec)m(k)h(for)e(mail,)j(the)e
+(shell)f(do)s(es)g(so)h(b)s(efore)f(displa)m(ying)h(the)f(primary)g
+(prompt.)57 b(If)630 2217 y(this)37 b(v)-5 b(ariable)38
+b(is)f(unset,)h(or)f(set)h(to)g(a)f(v)-5 b(alue)38 b(that)f(is)g(not)h
+(a)f(n)m(um)m(b)s(er)f(greater)i(than)f(or)630 2326 y(equal)31
+b(to)g(zero,)g(the)g(shell)g(disables)f(mail)h(c)m(hec)m(king.)150
+2491 y Ft(MAPFILE)144 b Fu(An)35 b(arra)m(y)h(v)-5 b(ariable)36
+b(created)g(to)h(hold)e(the)g(text)i(read)e(b)m(y)g(the)h
+Ft(mapfile)d Fu(builtin)i(when)630 2600 y(no)30 b(v)-5
+b(ariable)31 b(name)g(is)f(supplied.)150 2765 y Ft(OLDPWD)192
+b Fu(The)30 b(previous)g(w)m(orking)g(directory)h(as)g(set)g(b)m(y)f
+(the)h Ft(cd)e Fu(builtin.)150 2929 y Ft(OPTERR)192 b
+Fu(If)35 b(set)i(to)f(the)h(v)-5 b(alue)36 b(1,)i(Bash)e(displa)m(ys)g
+(error)f(messages)i(generated)g(b)m(y)f(the)g Ft(getopts)630
+3039 y Fu(builtin)30 b(command.)150 3203 y Ft(OSTYPE)192
+b Fu(A)30 b(string)h(describing)f(the)g(op)s(erating)h(system)g(Bash)f
+(is)h(running)d(on.)150 3367 y Ft(PIPESTATUS)630 3477
+y Fu(An)23 b(arra)m(y)h(v)-5 b(ariable)24 b(\(see)h(Section)f(6.7)h
+([Arra)m(ys],)g(page)f(95\))h(con)m(taining)g(a)f(list)g(of)g(exit)g
+(sta-)630 3587 y(tus)h(v)-5 b(alues)27 b(from)e(the)h(pro)s(cesses)g
+(in)f(the)h(most-recen)m(tly-executed)j(foreground)c(pip)s(eline)630
+3696 y(\(whic)m(h)30 b(ma)m(y)h(con)m(tain)h(only)f(a)f(single)h
+(command\).)150 3861 y Ft(POSIXLY_CORRECT)630 3970 y
+Fu(If)h(this)g(v)-5 b(ariable)34 b(is)e(in)g(the)h(en)m(vironmen)m(t)g
+(when)e(Bash)i(starts,)g(the)g(shell)g(en)m(ters)g Fm(posix)630
+4080 y Fu(mo)s(de)46 b(\(see)h(Section)g(6.11)g([Bash)g(POSIX)e(Mo)s
+(de],)50 b(page)d(101\))h(b)s(efore)e(reading)g(the)630
+4189 y(startup)38 b(\014les,)j(as)e(if)g(the)g Ft(--posix)d
+Fu(in)m(v)m(o)s(cation)41 b(option)e(had)f(b)s(een)g(supplied.)64
+b(If)39 b(it)g(is)630 4299 y(set)31 b(while)f(the)h(shell)f(is)h
+(running,)e(Bash)h(enables)h Fm(posix)f Fu(mo)s(de,)g(as)g(if)h(the)f
+(command)870 4436 y Ft(set)47 b(-o)g(posix)630 4573 y
+Fu(had)33 b(b)s(een)g(executed.)51 b(When)33 b(the)h(shell)f(en)m(ters)
+h Fm(posix)f Fu(mo)s(de,)h(it)g(sets)g(this)g(v)-5 b(ariable)34
+b(if)630 4682 y(it)d(w)m(as)g(not)f(already)h(set.)150
+4847 y Ft(PPID)288 b Fu(The)30 b(pro)s(cess)g Fm(id)g
+Fu(of)h(the)f(shell's)h(paren)m(t)g(pro)s(cess.)40 b(This)30
+b(v)-5 b(ariable)31 b(is)f(readonly)-8 b(.)150 5011 y
+Ft(PROMPT_COMMAND)630 5121 y Fu(If)23 b(this)h(v)-5 b(ariable)24
+b(is)g(set,)i(and)d(is)h(an)f(arra)m(y)-8 b(,)27 b(the)d(v)-5
+b(alue)24 b(of)g(eac)m(h)g(set)h(elemen)m(t)g(is)f(in)m(terpreted)630
+5230 y(as)29 b(a)g(command)f(to)i(execute)g(b)s(efore)e(prin)m(ting)h
+(the)g(primary)f(prompt)f(\()p Ft($PS1)p Fu(\).)40 b(If)28
+b(this)h(is)630 5340 y(set)c(but)f(not)g(an)h(arra)m(y)g(v)-5
+b(ariable,)26 b(its)f(v)-5 b(alue)25 b(is)f(used)g(as)h(a)f(command)g
+(to)i(execute)f(instead.)p eop end
+%%Page: 83 89
+TeXDict begin 83 88 bop 150 -116 a Fu(Chapter)30 b(5:)41
+b(Shell)30 b(V)-8 b(ariables)2459 b(83)150 299 y Ft(PROMPT_DIRTRIM)630
+408 y Fu(If)27 b(set)g(to)h(a)g(n)m(um)m(b)s(er)e(greater)i(than)f
+(zero,)i(the)e(v)-5 b(alue)28 b(is)f(used)g(as)g(the)h(n)m(um)m(b)s(er)
+e(of)h(trailing)630 518 y(directory)35 b(comp)s(onen)m(ts)g(to)h
+(retain)f(when)f(expanding)g(the)h Ft(\\w)f Fu(and)g
+Ft(\\W)g Fu(prompt)g(string)630 628 y(escap)s(es)21 b(\(see)h(Section)f
+(6.9)h([Con)m(trolling)g(the)f(Prompt],)h(page)f(98\).)39
+b(Characters)21 b(remo)m(v)m(ed)630 737 y(are)31 b(replaced)g(with)f
+(an)g(ellipsis.)150 892 y Ft(PS0)336 b Fu(The)32 b(v)-5
+b(alue)33 b(of)g(this)g(parameter)g(is)g(expanded)e(lik)m(e)j
+Ft(PS1)e Fu(and)g(displa)m(y)m(ed)i(b)m(y)e(in)m(teractiv)m(e)630
+1002 y(shells)e(after)h(reading)g(a)g(command)f(and)f(b)s(efore)h(the)h
+(command)f(is)h(executed.)150 1157 y Ft(PS3)336 b Fu(The)34
+b(v)-5 b(alue)35 b(of)f(this)g(v)-5 b(ariable)35 b(is)g(used)e(as)i
+(the)f(prompt)g(for)g(the)g Ft(select)f Fu(command.)52
+b(If)630 1267 y(this)30 b(v)-5 b(ariable)31 b(is)g(not)f(set,)i(the)e
+Ft(select)f Fu(command)h(prompts)f(with)h(`)p Ft(#?)g
+Fu(')150 1422 y Ft(PS4)336 b Fu(The)37 b(v)-5 b(alue)37
+b(of)g(this)g(parameter)h(is)f(expanded)f(lik)m(e)i Fr(PS1)44
+b Fu(and)37 b(the)g(expanded)f(v)-5 b(alue)38 b(is)630
+1532 y(the)d(prompt)f(prin)m(ted)g(b)s(efore)g(the)h(command)f(line)h
+(is)g(ec)m(ho)s(ed)g(when)f(the)h Ft(-x)f Fu(option)h(is)630
+1641 y(set)k(\(see)h(Section)g(4.3.1)g([The)f(Set)g(Builtin],)j(page)e
+(62\).)67 b(The)38 b(\014rst)g(c)m(haracter)j(of)e(the)630
+1751 y(expanded)33 b(v)-5 b(alue)33 b(is)h(replicated)g(m)m(ultiple)g
+(times,)h(as)f(necessary)-8 b(,)35 b(to)f(indicate)g(m)m(ultiple)630
+1861 y(lev)m(els)e(of)e(indirection.)42 b(The)29 b(default)i(is)f(`)p
+Ft(+)h Fu('.)150 2016 y Ft(PWD)336 b Fu(The)30 b(curren)m(t)g(w)m
+(orking)h(directory)g(as)f(set)h(b)m(y)f(the)h Ft(cd)f
+Fu(builtin.)150 2171 y Ft(RANDOM)192 b Fu(Eac)m(h)26
+b(time)g(this)f(parameter)h(is)g(referenced,)g(it)g(expands)f(to)h(a)g
+(random)e(in)m(teger)j(b)s(et)m(w)m(een)630 2281 y(0)e(and)e(32767.)41
+b(Assigning)25 b(a)f(v)-5 b(alue)25 b(to)g(this)f(v)-5
+b(ariable)25 b(seeds)f(the)h(random)e(n)m(um)m(b)s(er)g(gener-)630
+2390 y(ator.)41 b(If)27 b Ft(RANDOM)f Fu(is)h(unset,)h(it)g(loses)h
+(its)f(sp)s(ecial)g(prop)s(erties,)g(ev)m(en)g(if)g(it)g(is)f
+(subsequen)m(tly)630 2500 y(reset.)150 2655 y Ft(READLINE_LINE)630
+2765 y Fu(The)g(con)m(ten)m(ts)i(of)f(the)g(Readline)g(line)g
+(bu\013er,)f(for)h(use)f(with)g(`)p Ft(bind)j(-x)p Fu(')d(\(see)h
+(Section)h(4.2)630 2874 y([Bash)i(Builtins],)g(page)g(51\).)150
+3029 y Ft(READLINE_MARK)630 3139 y Fu(The)26 b(p)s(osition)h(of)g(the)g
+Fr(mark)32 b Fu(\(sa)m(v)m(ed)c(insertion)f(p)s(oin)m(t\))g(in)g(the)g
+(Readline)g(line)g(bu\013er,)g(for)630 3249 y(use)36
+b(with)f(`)p Ft(bind)30 b(-x)p Fu(')35 b(\(see)i(Section)g(4.2)g([Bash)
+f(Builtins],)i(page)f(51\).)58 b(The)35 b(c)m(haracters)630
+3358 y(b)s(et)m(w)m(een)c(the)g(insertion)f(p)s(oin)m(t)g(and)g(the)h
+(mark)f(are)h(often)f(called)i(the)f Fr(region)p Fu(.)150
+3513 y Ft(READLINE_POINT)630 3623 y Fu(The)23 b(p)s(osition)g(of)g(the)
+h(insertion)f(p)s(oin)m(t)g(in)g(the)g(Readline)h(line)f(bu\013er,)h
+(for)f(use)g(with)g(`)p Ft(bind)630 3733 y(-x)p Fu(')30
+b(\(see)h(Section)h(4.2)f([Bash)g(Builtins],)g(page)g(51\).)150
+3888 y Ft(REPLY)240 b Fu(The)30 b(default)g(v)-5 b(ariable)32
+b(for)e(the)g Ft(read)g Fu(builtin.)150 4043 y Ft(SECONDS)144
+b Fu(This)40 b(v)-5 b(ariable)41 b(expands)f(to)h(the)g(n)m(um)m(b)s
+(er)e(of)i(seconds)g(since)g(the)f(shell)h(w)m(as)g(started.)630
+4153 y(Assignmen)m(t)i(to)g(this)g(v)-5 b(ariable)43
+b(resets)g(the)g(coun)m(t)g(to)g(the)g(v)-5 b(alue)43
+b(assigned,)j(and)c(the)630 4262 y(expanded)35 b(v)-5
+b(alue)36 b(b)s(ecomes)h(the)f(v)-5 b(alue)36 b(assigned)g(plus)f(the)h
+(n)m(um)m(b)s(er)f(of)h(seconds)g(since)630 4372 y(the)24
+b(assignmen)m(t.)39 b(The)23 b(n)m(um)m(b)s(er)g(of)h(seconds)f(at)i
+(shell)f(in)m(v)m(o)s(cation)i(and)d(the)h(curren)m(t)f(time)630
+4482 y(is)j(alw)m(a)m(ys)i(determined)e(b)m(y)g(querying)g(the)h
+(system)f(clo)s(c)m(k.)41 b(If)26 b Ft(SECONDS)e Fu(is)i(unset,)h(it)g
+(loses)630 4591 y(its)k(sp)s(ecial)g(prop)s(erties,)f(ev)m(en)h(if)f
+(it)h(is)f(subsequen)m(tly)g(reset.)150 4746 y Ft(SHELL)240
+b Fu(This)24 b(en)m(vironmen)m(t)i(v)-5 b(ariable)26
+b(expands)e(to)i(the)g(full)f(pathname)g(to)h(the)f(shell.)39
+b(If)25 b(it)g(is)h(not)630 4856 y(set)36 b(when)f(the)h(shell)g
+(starts,)i(Bash)e(assigns)h(to)f(it)h(the)f(full)f(pathname)h(of)g(the)
+g(curren)m(t)630 4966 y(user's)30 b(login)h(shell.)150
+5121 y Ft(SHELLOPTS)630 5230 y Fu(A)g(colon-separated)h(list)f(of)g
+(enabled)f(shell)h(options.)41 b(Eac)m(h)31 b(w)m(ord)f(in)g(the)h
+(list)g(is)g(a)g(v)-5 b(alid)630 5340 y(argumen)m(t)28
+b(for)f(the)h Ft(-o)e Fu(option)i(to)g(the)g Ft(set)e
+Fu(builtin)h(command)g(\(see)i(Section)f(4.3.1)h([The)p
+eop end
+%%Page: 84 90
+TeXDict begin 84 89 bop 150 -116 a Fu(Chapter)30 b(5:)41
+b(Shell)30 b(V)-8 b(ariables)2459 b(84)630 299 y(Set)29
+b(Builtin],)h(page)f(62\).)42 b(The)28 b(options)h(app)s(earing)f(in)g
+Ft(SHELLOPTS)e Fu(are)j(those)h(rep)s(orted)630 408 y(as)g(`)p
+Ft(on)p Fu(')f(b)m(y)h(`)p Ft(set)g(-o)p Fu('.)40 b(If)29
+b(this)h(v)-5 b(ariable)30 b(is)g(in)f(the)h(en)m(vironmen)m(t)g(when)f
+(Bash)h(starts)g(up,)630 518 y(eac)m(h)41 b(shell)e(option)h(in)f(the)h
+(list)g(will)f(b)s(e)g(enabled)h(b)s(efore)f(reading)g(an)m(y)h
+(startup)f(\014les.)630 628 y(This)30 b(v)-5 b(ariable)31
+b(is)f(readonly)-8 b(.)150 790 y Ft(SHLVL)240 b Fu(Incremen)m(ted)21
+b(b)m(y)g(one)g(eac)m(h)h(time)f(a)h(new)e(instance)h(of)g(Bash)g(is)g
+(started.)38 b(This)20 b(is)h(in)m(tended)630 899 y(to)31
+b(b)s(e)f(a)h(coun)m(t)g(of)f(ho)m(w)h(deeply)f(y)m(our)g(Bash)h
+(shells)f(are)h(nested.)150 1062 y Ft(SRANDOM)144 b Fu(This)36
+b(v)-5 b(ariable)37 b(expands)f(to)h(a)g(32-bit)h(pseudo-random)d(n)m
+(um)m(b)s(er)g(eac)m(h)j(time)f(it)g(is)g(ref-)630 1171
+y(erenced.)47 b(The)32 b(random)g(n)m(um)m(b)s(er)f(generator)j(is)e
+(not)h(linear)g(on)f(systems)h(that)g(supp)s(ort)630
+1281 y Ft(/dev/urandom)26 b Fu(or)k Ft(arc4random)p Fu(,)d(so)j(eac)m
+(h)g(returned)f(n)m(um)m(b)s(er)f(has)h(no)g(relationship)h(to)630
+1390 y(the)39 b(n)m(um)m(b)s(ers)e(preceding)i(it.)66
+b(The)38 b(random)g(n)m(um)m(b)s(er)f(generator)j(cannot)g(b)s(e)e
+(seeded,)630 1500 y(so)c(assignmen)m(ts)g(to)g(this)f(v)-5
+b(ariable)34 b(ha)m(v)m(e)h(no)e(e\013ect.)51 b(If)33
+b Ft(SRANDOM)e Fu(is)j(unset,)g(it)f(loses)i(its)630
+1610 y(sp)s(ecial)c(prop)s(erties,)f(ev)m(en)h(if)f(it)h(is)g
+(subsequen)m(tly)f(reset.)150 1772 y Ft(TIMEFORMAT)630
+1881 y Fu(The)g(v)-5 b(alue)32 b(of)f(this)g(parameter)g(is)g(used)f
+(as)h(a)g(format)h(string)f(sp)s(ecifying)f(ho)m(w)h(the)g(tim-)630
+1991 y(ing)37 b(information)f(for)h(pip)s(elines)f(pre\014xed)f(with)h
+(the)h Ft(time)e Fu(reserv)m(ed)i(w)m(ord)f(should)g(b)s(e)630
+2101 y(displa)m(y)m(ed.)k(The)27 b(`)p Ft(\045)p Fu(')h(c)m(haracter)h
+(in)m(tro)s(duces)e(an)h(escap)s(e)g(sequence)g(that)g(is)f(expanded)g
+(to)630 2210 y(a)37 b(time)g(v)-5 b(alue)36 b(or)h(other)f
+(information.)59 b(The)36 b(escap)s(e)g(sequences)h(and)e(their)i
+(meanings)630 2320 y(are)31 b(as)f(follo)m(ws;)i(the)f(braces)f(denote)
+h(optional)h(p)s(ortions.)630 2482 y Ft(\045\045)384
+b Fu(A)30 b(literal)i(`)p Ft(\045)p Fu('.)630 2644 y
+Ft(\045[)p Fj(p)p Ft(][l]R)96 b Fu(The)30 b(elapsed)h(time)g(in)f
+(seconds.)630 2806 y Ft(\045[)p Fj(p)p Ft(][l]U)96 b
+Fu(The)30 b(n)m(um)m(b)s(er)f(of)h(CPU)g(seconds)h(sp)s(en)m(t)f(in)g
+(user)f(mo)s(de.)630 2968 y Ft(\045[)p Fj(p)p Ft(][l]S)96
+b Fu(The)30 b(n)m(um)m(b)s(er)f(of)h(CPU)g(seconds)h(sp)s(en)m(t)f(in)g
+(system)g(mo)s(de.)630 3131 y Ft(\045P)384 b Fu(The)30
+b(CPU)g(p)s(ercen)m(tage,)i(computed)e(as)h(\(\045U)f
+Ft(+)g Fu(\045S\))g(/)h(\045R.)630 3293 y(The)23 b(optional)j
+Fr(p)g Fu(is)e(a)g(digit)h(sp)s(ecifying)e(the)h(precision,)i(the)e(n)m
+(um)m(b)s(er)f(of)h(fractional)h(digits)630 3402 y(after)36
+b(a)f(decimal)i(p)s(oin)m(t.)55 b(A)35 b(v)-5 b(alue)36
+b(of)f(0)h(causes)g(no)f(decimal)h(p)s(oin)m(t)f(or)h(fraction)g(to)g
+(b)s(e)630 3512 y(output.)48 b(A)m(t)34 b(most)f(three)g(places)h
+(after)f(the)g(decimal)h(p)s(oin)m(t)f(ma)m(y)h(b)s(e)e(sp)s
+(eci\014ed;)i(v)-5 b(alues)630 3622 y(of)31 b Fr(p)h
+Fu(greater)g(than)e(3)h(are)f(c)m(hanged)h(to)g(3.)42
+b(If)29 b Fr(p)k Fu(is)d(not)h(sp)s(eci\014ed,)f(the)h(v)-5
+b(alue)30 b(3)h(is)g(used.)630 3758 y(The)54 b(optional)h
+Ft(l)f Fu(sp)s(eci\014es)g(a)h(longer)f(format,)61 b(including)54
+b(min)m(utes,)61 b(of)54 b(the)g(form)630 3867 y Fr(MM)10
+b Fu(m)p Fr(SS)p Fu(.)p Fr(FF)d Fu(s.)103 b(The)50 b(v)-5
+b(alue)52 b(of)f Fr(p)j Fu(determines)d(whether)f(or)h(not)h(the)f
+(fraction)h(is)630 3977 y(included.)630 4113 y(If)30
+b(this)g(v)-5 b(ariable)31 b(is)g(not)f(set,)i(Bash)e(acts)h(as)g(if)f
+(it)h(had)f(the)h(v)-5 b(alue)870 4248 y Ft
+($'\\nreal\\t\0453lR\\nuser\\t\0453)o(lU\\n)o(sys\\)o(t\0453)o(lS')630
+4384 y Fu(If)37 b(the)g(v)-5 b(alue)38 b(is)f(n)m(ull,)i(no)f(timing)f
+(information)h(is)f(displa)m(y)m(ed.)62 b(A)37 b(trailing)i(newline)e
+(is)630 4494 y(added)30 b(when)f(the)i(format)f(string)h(is)f(displa)m
+(y)m(ed.)150 4656 y Ft(TMOUT)240 b Fu(If)22 b(set)h(to)g(a)g(v)-5
+b(alue)23 b(greater)h(than)e(zero,)j Ft(TMOUT)d Fu(is)g(treated)i(as)e
+(the)h(default)g(timeout)g(for)g(the)630 4766 y Ft(read)31
+b Fu(builtin)h(\(see)h(Section)f(4.2)i([Bash)e(Builtins],)h(page)g
+(51\).)47 b(The)32 b Ft(select)e Fu(command)630 4875
+y(\(see)f(Section)h(3.2.5.2)g([Conditional)g(Constructs],)e(page)i
+(11\))f(terminates)g(if)g(input)e(do)s(es)630 4985 y(not)k(arriv)m(e)g
+(after)g Ft(TMOUT)e Fu(seconds)h(when)f(input)h(is)g(coming)h(from)f(a)
+h(terminal.)630 5121 y(In)40 b(an)h(in)m(teractiv)m(e)i(shell,)h(the)d
+(v)-5 b(alue)41 b(is)g(in)m(terpreted)g(as)f(the)h(n)m(um)m(b)s(er)f
+(of)h(seconds)f(to)630 5230 y(w)m(ait)28 b(for)e(a)g(line)h(of)g(input)
+e(after)i(issuing)f(the)h(primary)e(prompt.)39 b(Bash)26
+b(terminates)h(after)630 5340 y(w)m(aiting)32 b(for)e(that)h(n)m(um)m
+(b)s(er)e(of)h(seconds)h(if)f(a)h(complete)h(line)e(of)h(input)e(do)s
+(es)h(not)h(arriv)m(e.)p eop end
+%%Page: 85 91
+TeXDict begin 85 90 bop 150 -116 a Fu(Chapter)30 b(5:)41
+b(Shell)30 b(V)-8 b(ariables)2459 b(85)150 299 y Ft(TMPDIR)192
+b Fu(If)39 b(set,)j(Bash)e(uses)f(its)h(v)-5 b(alue)40
+b(as)f(the)h(name)f(of)h(a)g(directory)g(in)f(whic)m(h)g(Bash)h
+(creates)630 408 y(temp)s(orary)30 b(\014les)g(for)g(the)h(shell's)g
+(use.)150 568 y Ft(UID)336 b Fu(The)30 b(n)m(umeric)g(real)h(user)f(id)
+g(of)g(the)h(curren)m(t)f(user.)40 b(This)30 b(v)-5 b(ariable)31
+b(is)f(readonly)-8 b(.)p eop end
+%%Page: 86 92
+TeXDict begin 86 91 bop 3659 -116 a Fu(86)150 299 y Fp(6)80
+b(Bash)54 b(F)-13 b(eatures)150 502 y Fu(This)30 b(c)m(hapter)h
+(describ)s(es)e(features)i(unique)e(to)i(Bash.)150 731
+y Fs(6.1)68 b(In)l(v)l(oking)46 b(Bash)390 890 y Ft(bash)h([long-opt])e
+([-ir])h([-abefhkmnptuvxdBCDHP])c([-o)47 b Fj(option)p
+Ft(])581 1000 y([-O)g Fj(shopt_option)p Ft(])d([)p Fj(argument)h
+Ft(...)o(])390 1110 y(bash)i([long-opt])e([-abefhkmnptuvxdBCDHP])c([-o)
+47 b Fj(option)p Ft(])581 1219 y([-O)g Fj(shopt_option)p
+Ft(])d(-c)j Fj(string)f Ft([)p Fj(argument)g Ft(...)o(])390
+1329 y(bash)h([long-opt])e(-s)i([-abefhkmnptuvxdBCDHP])42
+b([-o)k Fj(option)p Ft(])581 1438 y([-O)h Fj(shopt_option)p
+Ft(])d([)p Fj(argument)h Ft(...)o(])275 1567 y Fu(All)31
+b(of)g(the)f(single-c)m(haracter)k(options)d(used)f(with)g(the)h
+Ft(set)f Fu(builtin)g(\(see)h(Section)h(4.3.1)g([The)f(Set)150
+1676 y(Builtin],)45 b(page)c(62\))i(can)e(b)s(e)f(used)h(as)g(options)g
+(when)f(the)i(shell)f(is)g(in)m(v)m(ok)m(ed.)74 b(In)41
+b(addition,)j(there)150 1786 y(are)38 b(sev)m(eral)h(m)m(ulti-c)m
+(haracter)h(options)d(that)h(y)m(ou)g(can)g(use.)61 b(These)38
+b(options)f(m)m(ust)h(app)s(ear)e(on)i(the)150 1896 y(command)30
+b(line)h(b)s(efore)f(the)g(single-c)m(haracter)j(options)e(to)g(b)s(e)f
+(recognized.)150 2043 y Ft(--debugger)630 2152 y Fu(Arrange)j(for)g
+(the)g(debugger)g(pro\014le)g(to)h(b)s(e)e(executed)i(b)s(efore)f(the)g
+(shell)g(starts.)49 b(T)-8 b(urns)630 2262 y(on)35 b(extended)g
+(debugging)f(mo)s(de)h(\(see)g(Section)h(4.3.2)h([The)d(Shopt)g
+(Builtin],)j(page)f(66,)630 2371 y(for)30 b(a)h(description)f(of)h(the)
+f Ft(extdebug)f Fu(option)h(to)h(the)g Ft(shopt)e Fu(builtin\).)150
+2519 y Ft(--dump-po-strings)630 2628 y Fu(A)37 b(list)g(of)f(all)i
+(double-quoted)e(strings)g(preceded)g(b)m(y)h(`)p Ft($)p
+Fu(')f(is)h(prin)m(ted)f(on)g(the)h(standard)630 2738
+y(output)29 b(in)g(the)g Fm(gnu)g Ft(gettext)f Fu(PO)g(\(p)s(ortable)i
+(ob)5 b(ject\))30 b(\014le)g(format.)40 b(Equiv)-5 b(alen)m(t)31
+b(to)f Ft(-D)630 2847 y Fu(except)h(for)f(the)h(output)f(format.)150
+2995 y Ft(--dump-strings)630 3104 y Fu(Equiv)-5 b(alen)m(t)31
+b(to)g Ft(-D)p Fu(.)150 3251 y Ft(--help)192 b Fu(Displa)m(y)32
+b(a)e(usage)h(message)h(on)e(standard)g(output)g(and)f(exit)j
+(successfully)-8 b(.)150 3399 y Ft(--init-file)27 b Fj(filename)150
+3508 y Ft(--rcfile)h Fj(filename)630 3618 y Fu(Execute)23
+b(commands)e(from)g Fr(\014lename)28 b Fu(\(instead)22
+b(of)g Ft(~/.bashrc)p Fu(\))e(in)h(an)h(in)m(teractiv)m(e)i(shell.)150
+3765 y Ft(--login)144 b Fu(Equiv)-5 b(alen)m(t)31 b(to)g
+Ft(-l)p Fu(.)150 3912 y Ft(--noediting)630 4022 y Fu(Do)h(not)e(use)h
+(the)g Fm(gnu)f Fu(Readline)i(library)e(\(see)h(Chapter)g(8)g([Command)
+f(Line)g(Editing],)630 4131 y(page)h(111\))h(to)f(read)g(command)f
+(lines)g(when)g(the)g(shell)h(is)f(in)m(teractiv)m(e.)150
+4278 y Ft(--noprofile)630 4388 y Fu(Don't)22 b(load)g(the)g
+(system-wide)f(startup)g(\014le)h Ft(/etc/profile)c Fu(or)j(an)m(y)h
+(of)f(the)h(p)s(ersonal)f(ini-)630 4498 y(tialization)34
+b(\014les)e Ft(~/.bash_profile)p Fu(,)c Ft(~/.bash_login)p
+Fu(,)g(or)k Ft(~/.profile)c Fu(when)j(Bash)630 4607 y(is)f(in)m(v)m(ok)
+m(ed)i(as)f(a)g(login)g(shell.)150 4754 y Ft(--norc)192
+b Fu(Don't)35 b(read)f(the)g Ft(~/.bashrc)e Fu(initialization)k(\014le)
+f(in)e(an)h(in)m(teractiv)m(e)j(shell.)52 b(This)33 b(is)h(on)630
+4864 y(b)m(y)c(default)h(if)f(the)h(shell)f(is)h(in)m(v)m(ok)m(ed)h(as)
+e Ft(sh)p Fu(.)150 5011 y Ft(--posix)144 b Fu(Change)24
+b(the)h(b)s(eha)m(vior)f(of)g(Bash)h(where)e(the)i(default)f(op)s
+(eration)h(di\013ers)f(from)f(the)i Fm(posix)630 5121
+y Fu(standard)35 b(to)h(matc)m(h)g(the)g(standard.)55
+b(This)35 b(is)h(in)m(tended)f(to)h(mak)m(e)h(Bash)f(b)s(eha)m(v)m(e)g
+(as)g(a)630 5230 y(strict)22 b(sup)s(erset)e(of)h(that)g(standard.)37
+b(See)21 b(Section)h(6.11)g([Bash)f(POSIX)f(Mo)s(de],)k(page)d(101,)630
+5340 y(for)30 b(a)h(description)f(of)h(the)f(Bash)h Fm(posix)f
+Fu(mo)s(de.)p eop end
+%%Page: 87 93
+TeXDict begin 87 92 bop 150 -116 a Fu(Chapter)30 b(6:)41
+b(Bash)30 b(F)-8 b(eatures)2484 b(87)150 299 y Ft(--restricted)630
+408 y Fu(Mak)m(e)54 b(the)e(shell)g(a)h(restricted)g(shell)f(\(see)h
+(Section)g(6.10)h([The)d(Restricted)j(Shell],)630 518
+y(page)31 b(100\).)150 677 y Ft(--verbose)630 787 y Fu(Equiv)-5
+b(alen)m(t)31 b(to)g Ft(-v)p Fu(.)41 b(Prin)m(t)30 b(shell)g(input)g
+(lines)g(as)h(they're)g(read.)150 946 y Ft(--version)630
+1056 y Fu(Sho)m(w)d(v)m(ersion)g(information)g(for)g(this)g(instance)h
+(of)f(Bash)g(on)g(the)g(standard)f(output)h(and)630 1166
+y(exit)j(successfully)-8 b(.)275 1325 y(There)28 b(are)i(sev)m(eral)g
+(single-c)m(haracter)i(options)d(that)h(ma)m(y)g(b)s(e)e(supplied)g(at)
+i(in)m(v)m(o)s(cation)h(whic)m(h)e(are)150 1435 y(not)i(a)m(v)-5
+b(ailable)32 b(with)e(the)h Ft(set)e Fu(builtin.)150
+1594 y Ft(-c)384 b Fu(Read)66 b(and)f(execute)i(commands)e(from)g(the)h
+(\014rst)e(non-option)i(argumen)m(t)g Fr(com-)630 1704
+y(mand)p 859 1704 28 4 v 39 w(string)p Fu(,)34 b(then)e(exit.)49
+b(If)32 b(there)h(are)g(argumen)m(ts)g(after)g(the)g
+Fr(command)p 3303 1704 V 40 w(string)p Fu(,)h(the)630
+1813 y(\014rst)e(argumen)m(t)h(is)g(assigned)g(to)h Ft($0)e
+Fu(and)h(an)m(y)g(remaining)g(argumen)m(ts)g(are)g(assigned)g(to)630
+1923 y(the)38 b(p)s(ositional)h(parameters.)65 b(The)37
+b(assignmen)m(t)i(to)g Ft($0)f Fu(sets)g(the)h(name)f(of)g(the)g
+(shell,)630 2032 y(whic)m(h)30 b(is)h(used)e(in)h(w)m(arning)g(and)g
+(error)g(messages.)150 2192 y Ft(-i)384 b Fu(F)-8 b(orce)22
+b(the)g(shell)f(to)g(run)f(in)m(teractiv)m(ely)-8 b(.)41
+b(In)m(teractiv)m(e)23 b(shells)e(are)h(describ)s(ed)d(in)i(Section)h
+(6.3)630 2301 y([In)m(teractiv)m(e)33 b(Shells],)e(page)g(89.)150
+2461 y Ft(-l)384 b Fu(Mak)m(e)33 b(this)e(shell)h(act)g(as)g(if)f(it)h
+(had)f(b)s(een)f(directly)i(in)m(v)m(ok)m(ed)h(b)m(y)f(login.)44
+b(When)31 b(the)h(shell)630 2570 y(is)37 b(in)m(teractiv)m(e,)43
+b(this)37 b(is)g(equiv)-5 b(alen)m(t)39 b(to)f(starting)h(a)e(login)i
+(shell)e(with)g(`)p Ft(exec)30 b(-l)g(bash)p Fu('.)630
+2680 y(When)h(the)g(shell)h(is)f(not)g(in)m(teractiv)m(e,)k(the)c
+(login)h(shell)g(startup)f(\014les)g(will)g(b)s(e)g(executed.)630
+2790 y(`)p Ft(exec)e(bash)h(-l)p Fu(')43 b(or)h(`)p Ft(exec)29
+b(bash)g(--login)p Fu(')42 b(will)i(replace)h(the)f(curren)m(t)f(shell)
+h(with)g(a)630 2899 y(Bash)26 b(login)g(shell.)39 b(See)26
+b(Section)g(6.2)h([Bash)e(Startup)g(Files],)j(page)e(88,)i(for)d(a)h
+(description)630 3009 y(of)31 b(the)f(sp)s(ecial)h(b)s(eha)m(vior)g(of)
+f(a)h(login)g(shell.)150 3168 y Ft(-r)384 b Fu(Mak)m(e)54
+b(the)e(shell)g(a)h(restricted)g(shell)f(\(see)h(Section)g(6.10)h([The)
+d(Restricted)j(Shell],)630 3278 y(page)31 b(100\).)150
+3437 y Ft(-s)384 b Fu(If)24 b(this)h(option)h(is)f(presen)m(t,)h(or)f
+(if)g(no)f(argumen)m(ts)i(remain)e(after)i(option)f(pro)s(cessing,)h
+(then)630 3547 y(commands)i(are)h(read)g(from)f(the)h(standard)f
+(input.)39 b(This)28 b(option)h(allo)m(ws)h(the)f(p)s(ositional)630
+3656 y(parameters)i(to)h(b)s(e)e(set)i(when)d(in)m(v)m(oking)k(an)d(in)
+m(teractiv)m(e)k(shell)d(or)g(when)f(reading)h(input)630
+3766 y(through)f(a)g(pip)s(e.)150 3925 y Ft(-D)384 b
+Fu(A)37 b(list)g(of)f(all)i(double-quoted)e(strings)g(preceded)g(b)m(y)
+h(`)p Ft($)p Fu(')f(is)h(prin)m(ted)f(on)g(the)h(standard)630
+4035 y(output.)63 b(These)38 b(are)g(the)g(strings)g(that)h(are)f(sub)5
+b(ject)38 b(to)h(language)g(translation)g(when)630 4144
+y(the)e(curren)m(t)g(lo)s(cale)h(is)f(not)g Ft(C)g Fu(or)f
+Ft(POSIX)g Fu(\(see)h(Section)h(3.1.2.5)h([Lo)s(cale)g(T)-8
+b(ranslation],)630 4254 y(page)31 b(7\).)42 b(This)29
+b(implies)i(the)f Ft(-n)g Fu(option;)h(no)f(commands)g(will)h(b)s(e)f
+(executed.)150 4413 y Ft([-+]O)f([)p Fj(shopt_option)p
+Ft(])630 4523 y Fr(shopt)p 854 4523 V 40 w(option)44
+b Fu(is)g(one)h(of)f(the)g(shell)h(options)f(accepted)h(b)m(y)f(the)h
+Ft(shopt)d Fu(builtin)i(\(see)630 4633 y(Section)32 b(4.3.2)h([The)e
+(Shopt)f(Builtin],)i(page)g(66\).)44 b(If)31 b Fr(shopt)p
+2724 4633 V 40 w(option)g Fu(is)g(presen)m(t,)h Ft(-O)f
+Fu(sets)630 4742 y(the)24 b(v)-5 b(alue)24 b(of)g(that)h(option;)h
+Ft(+O)e Fu(unsets)f(it.)39 b(If)23 b Fr(shopt)p 2423
+4742 V 40 w(option)h Fu(is)g(not)g(supplied,)g(the)g(names)630
+4852 y(and)31 b(v)-5 b(alues)32 b(of)g(the)g(shell)g(options)g
+(accepted)h(b)m(y)f Ft(shopt)e Fu(are)i(prin)m(ted)f(on)h(the)g
+(standard)630 4961 y(output.)40 b(If)29 b(the)h(in)m(v)m(o)s(cation)h
+(option)f(is)f Ft(+O)p Fu(,)h(the)f(output)g(is)h(displa)m(y)m(ed)g(in)
+f(a)h(format)f(that)630 5071 y(ma)m(y)i(b)s(e)f(reused)f(as)i(input.)
+150 5230 y Ft(--)384 b Fu(A)38 b Ft(--)g Fu(signals)g(the)h(end)e(of)i
+(options)f(and)g(disables)g(further)f(option)h(pro)s(cessing.)64
+b(An)m(y)630 5340 y(argumen)m(ts)31 b(after)g(the)f Ft(--)g
+Fu(are)h(treated)g(as)g(\014lenames)f(and)g(argumen)m(ts.)p
+eop end
+%%Page: 88 94
+TeXDict begin 88 93 bop 150 -116 a Fu(Chapter)30 b(6:)41
+b(Bash)30 b(F)-8 b(eatures)2484 b(88)275 299 y(A)27 b
+Fl(lo)-5 b(gin)35 b Fu(shell)27 b(is)g(one)h(whose)f(\014rst)f(c)m
+(haracter)j(of)e(argumen)m(t)h(zero)f(is)h(`)p Ft(-)p
+Fu(',)g(or)f(one)g(in)m(v)m(ok)m(ed)i(with)e(the)150
+408 y Ft(--login)h Fu(option.)275 555 y(An)g Fl(inter)-5
+b(active)37 b Fu(shell)30 b(is)f(one)g(started)h(without)f(non-option)h
+(argumen)m(ts,)g(unless)e Ft(-s)h Fu(is)g(sp)s(eci\014ed,)150
+665 y(without)k(sp)s(ecifying)h(the)f Ft(-c)g Fu(option,)i(and)e(whose)
+g(input)g(and)f(output)h(are)h(b)s(oth)f(connected)h(to)g(ter-)150
+774 y(minals)g(\(as)g(determined)f(b)m(y)h Ft(isatty\(3\))p
+Fu(\),)e(or)i(one)g(started)g(with)f(the)h Ft(-i)f Fu(option.)51
+b(See)33 b(Section)i(6.3)150 884 y([In)m(teractiv)m(e)e(Shells],)e
+(page)g(89,)g(for)f(more)h(information.)275 1031 y(If)i(argumen)m(ts)h
+(remain)g(after)h(option)f(pro)s(cessing,)h(and)e(neither)h(the)g
+Ft(-c)g Fu(nor)f(the)h Ft(-s)g Fu(option)g(has)150 1140
+y(b)s(een)44 b(supplied,)j(the)d(\014rst)g(argumen)m(t)h(is)g(assumed)e
+(to)j(b)s(e)d(the)i(name)g(of)f(a)h(\014le)g(con)m(taining)h(shell)150
+1250 y(commands)30 b(\(see)g(Section)h(3.8)g([Shell)f(Scripts],)g(page)
+h(42\).)41 b(When)30 b(Bash)g(is)g(in)m(v)m(ok)m(ed)i(in)d(this)h
+(fashion,)150 1359 y Ft($0)37 b Fu(is)g(set)h(to)h(the)e(name)h(of)f
+(the)h(\014le,)i(and)c(the)i(p)s(ositional)g(parameters)g(are)g(set)g
+(to)g(the)g(remaining)150 1469 y(argumen)m(ts.)h(Bash)26
+b(reads)f(and)g(executes)h(commands)f(from)g(this)g(\014le,)i(then)e
+(exits.)40 b(Bash's)25 b(exit)i(status)150 1579 y(is)f(the)h(exit)h
+(status)e(of)h(the)g(last)g(command)f(executed)h(in)g(the)f(script.)40
+b(If)26 b(no)g(commands)g(are)h(executed,)150 1688 y(the)k(exit)g
+(status)g(is)f(0.)150 1947 y Fs(6.2)68 b(Bash)45 b(Startup)g(Files)150
+2107 y Fu(This)23 b(section)j(describ)s(es)d(ho)m(w)i(Bash)f(executes)h
+(its)g(startup)f(\014les.)38 b(If)24 b(an)m(y)h(of)f(the)h(\014les)f
+(exist)h(but)e(cannot)150 2216 y(b)s(e)29 b(read,)i(Bash)f(rep)s(orts)f
+(an)h(error.)40 b(Tildes)30 b(are)g(expanded)f(in)h(\014lenames)g(as)g
+(describ)s(ed)f(ab)s(o)m(v)m(e)i(under)150 2326 y(Tilde)f(Expansion)g
+(\(see)h(Section)h(3.5.2)g([Tilde)e(Expansion],)h(page)g(24\).)275
+2473 y(In)m(teractiv)m(e)h(shells)f(are)g(describ)s(ed)e(in)h(Section)h
+(6.3)h([In)m(teractiv)m(e)h(Shells],)d(page)h(89.)150
+2684 y Fk(In)m(v)m(ok)m(ed)40 b(as)h(an)f(in)m(teractiv)m(e)f(login)j
+(shell,)g(or)g(with)e Fh(--login)150 2831 y Fu(When)c(Bash)f(is)h(in)m
+(v)m(ok)m(ed)h(as)f(an)g(in)m(teractiv)m(e)j(login)d(shell,)i(or)e(as)g
+(a)g(non-in)m(teractiv)m(e)i(shell)e(with)g(the)150 2940
+y Ft(--login)30 b Fu(option,)k(it)f(\014rst)e(reads)h(and)g(executes)i
+(commands)e(from)f(the)i(\014le)f Ft(/etc/profile)p Fu(,)e(if)i(that)
+150 3050 y(\014le)44 b(exists.)80 b(After)44 b(reading)g(that)g
+(\014le,)j(it)d(lo)s(oks)g(for)f Ft(~/.bash_profile)p
+Fu(,)g Ft(~/.bash_login)p Fu(,)h(and)150 3160 y Ft(~/.profile)p
+Fu(,)25 b(in)i(that)g(order,)h(and)e(reads)h(and)f(executes)j(commands)
+d(from)h(the)g(\014rst)f(one)i(that)f(exists)150 3269
+y(and)j(is)h(readable.)42 b(The)30 b Ft(--noprofile)d
+Fu(option)k(ma)m(y)g(b)s(e)f(used)g(when)g(the)h(shell)f(is)h(started)g
+(to)g(inhibit)150 3379 y(this)f(b)s(eha)m(vior.)275 3526
+y(When)h(an)g(in)m(teractiv)m(e)k(login)d(shell)g(exits,)h(or)f(a)g
+(non-in)m(teractiv)m(e)i(login)f(shell)e(executes)i(the)f
+Ft(exit)150 3635 y Fu(builtin)g(command,)i(Bash)e(reads)h(and)f
+(executes)i(commands)e(from)g(the)h(\014le)g Ft(~/.bash_logout)p
+Fu(,)d(if)i(it)150 3745 y(exists.)150 3956 y Fk(In)m(v)m(ok)m(ed)40
+b(as)h(an)f(in)m(teractiv)m(e)f(non-login)k(shell)150
+4103 y Fu(When)g(an)h(in)m(teractiv)m(e)i(shell)e(that)g(is)f(not)h(a)g
+(login)g(shell)g(is)f(started,)48 b(Bash)c(reads)f(and)g(executes)150
+4213 y(commands)31 b(from)g Ft(~/.bashrc)p Fu(,)f(if)h(that)h(\014le)g
+(exists.)44 b(This)31 b(ma)m(y)h(b)s(e)f(inhibited)g(b)m(y)g(using)g
+(the)h Ft(--norc)150 4322 y Fu(option.)40 b(The)27 b
+Ft(--rcfile)h Fj(file)e Fu(option)h(will)g(force)h(Bash)f(to)h(read)f
+(and)f(execute)j(commands)d(from)h Fr(\014le)150 4432
+y Fu(instead)k(of)f Ft(~/.bashrc)p Fu(.)275 4579 y(So,)g(t)m(ypically)
+-8 b(,)33 b(y)m(our)d Ft(~/.bash_profile)c Fu(con)m(tains)32
+b(the)f(line)390 4725 y Ft(if)47 b([)h(-f)f(~/.bashrc)e(];)i(then)g(.)g
+(~/.bashrc;)e(fi)150 4872 y Fu(after)31 b(\(or)g(b)s(efore\))f(an)m(y)h
+(login-sp)s(eci\014c)g(initializations.)150 5083 y Fk(In)m(v)m(ok)m(ed)
+40 b(non-in)m(teractiv)m(ely)150 5230 y Fu(When)33 b(Bash)g(is)g
+(started)h(non-in)m(teractiv)m(ely)-8 b(,)37 b(to)d(run)e(a)h(shell)h
+(script,)g(for)f(example,)i(it)e(lo)s(oks)h(for)f(the)150
+5340 y(v)-5 b(ariable)35 b Ft(BASH_ENV)d Fu(in)i(the)h(en)m(vironmen)m
+(t,)h(expands)e(its)g(v)-5 b(alue)35 b(if)g(it)g(app)s(ears)e(there,)j
+(and)e(uses)g(the)p eop end
+%%Page: 89 95
+TeXDict begin 89 94 bop 150 -116 a Fu(Chapter)30 b(6:)41
+b(Bash)30 b(F)-8 b(eatures)2484 b(89)150 299 y(expanded)30
+b(v)-5 b(alue)30 b(as)h(the)g(name)f(of)h(a)f(\014le)h(to)g(read)f(and)
+g(execute.)42 b(Bash)31 b(b)s(eha)m(v)m(es)g(as)g(if)f(the)g(follo)m
+(wing)150 408 y(command)g(w)m(ere)h(executed:)390 552
+y Ft(if)47 b([)h(-n)f("$BASH_ENV")e(];)i(then)f(.)i("$BASH_ENV";)c(fi)
+150 696 y Fu(but)30 b(the)g(v)-5 b(alue)31 b(of)g(the)f
+Ft(PATH)f Fu(v)-5 b(ariable)32 b(is)e(not)h(used)e(to)i(searc)m(h)g
+(for)f(the)h(\014lename.)275 840 y(As)42 b(noted)g(ab)s(o)m(v)m(e,)47
+b(if)42 b(a)h(non-in)m(teractiv)m(e)i(shell)d(is)g(in)m(v)m(ok)m(ed)i
+(with)e(the)h Ft(--login)d Fu(option,)46 b(Bash)150 949
+y(attempts)31 b(to)g(read)g(and)e(execute)j(commands)e(from)g(the)h
+(login)g(shell)g(startup)e(\014les.)150 1158 y Fk(In)m(v)m(ok)m(ed)40
+b(with)g(name)h Fh(sh)150 1305 y Fu(If)c(Bash)g(is)g(in)m(v)m(ok)m(ed)i
+(with)e(the)g(name)g Ft(sh)p Fu(,)i(it)f(tries)f(to)h(mimic)g(the)f
+(startup)g(b)s(eha)m(vior)g(of)h(historical)150 1414
+y(v)m(ersions)31 b(of)f Ft(sh)g Fu(as)h(closely)h(as)e(p)s(ossible,)g
+(while)h(conforming)f(to)h(the)g Fm(posix)e Fu(standard)h(as)h(w)m
+(ell.)275 1558 y(When)50 b(in)m(v)m(ok)m(ed)j(as)f(an)f(in)m(teractiv)m
+(e)j(login)e(shell,)57 b(or)51 b(as)g(a)h(non-in)m(teractiv)m(e)h
+(shell)f(with)f(the)150 1668 y Ft(--login)31 b Fu(option,)k(it)e
+(\014rst)g(attempts)h(to)g(read)f(and)g(execute)h(commands)f(from)g
+Ft(/etc/profile)d Fu(and)150 1777 y Ft(~/.profile)p Fu(,)d(in)i(that)i
+(order.)39 b(The)30 b Ft(--noprofile)c Fu(option)k(ma)m(y)g(b)s(e)f
+(used)g(to)h(inhibit)f(this)h(b)s(eha)m(vior.)150 1887
+y(When)36 b(in)m(v)m(ok)m(ed)i(as)e(an)g(in)m(teractiv)m(e)j(shell)e
+(with)f(the)g(name)h Ft(sh)p Fu(,)g(Bash)f(lo)s(oks)h(for)f(the)h(v)-5
+b(ariable)37 b Ft(ENV)p Fu(,)150 1997 y(expands)29 b(its)i(v)-5
+b(alue)30 b(if)h(it)f(is)g(de\014ned,)g(and)f(uses)h(the)g(expanded)g
+(v)-5 b(alue)30 b(as)h(the)f(name)g(of)g(a)h(\014le)f(to)h(read)150
+2106 y(and)g(execute.)46 b(Since)32 b(a)g(shell)g(in)m(v)m(ok)m(ed)h
+(as)f Ft(sh)f Fu(do)s(es)g(not)h(attempt)h(to)g(read)e(and)g(execute)i
+(commands)150 2216 y(from)39 b(an)m(y)g(other)h(startup)e(\014les,)k
+(the)d Ft(--rcfile)e Fu(option)j(has)f(no)g(e\013ect.)69
+b(A)39 b(non-in)m(teractiv)m(e)j(shell)150 2325 y(in)m(v)m(ok)m(ed)32
+b(with)e(the)g(name)h Ft(sh)f Fu(do)s(es)g(not)g(attempt)i(to)f(read)f
+(an)m(y)h(other)g(startup)e(\014les.)275 2469 y(When)h(in)m(v)m(ok)m
+(ed)h(as)g Ft(sh)p Fu(,)f(Bash)h(en)m(ters)g Fm(posix)e
+Fu(mo)s(de)h(after)h(the)g(startup)f(\014les)g(are)h(read.)150
+2678 y Fk(In)m(v)m(ok)m(ed)40 b(in)h Fg(posix)g Fk(mo)s(de)150
+2824 y Fu(When)28 b(Bash)h(is)g(started)g(in)g Fm(posix)f
+Fu(mo)s(de,)g(as)h(with)g(the)g Ft(--posix)d Fu(command)j(line)g
+(option,)h(it)f(follo)m(ws)150 2934 y(the)24 b Fm(posix)f
+Fu(standard)h(for)f(startup)h(\014les.)38 b(In)24 b(this)g(mo)s(de,)h
+(in)m(teractiv)m(e)i(shells)d(expand)f(the)h Ft(ENV)f
+Fu(v)-5 b(ariable)150 3044 y(and)30 b(commands)g(are)g(read)h(and)e
+(executed)j(from)d(the)i(\014le)f(whose)g(name)h(is)f(the)h(expanded)e
+(v)-5 b(alue.)41 b(No)150 3153 y(other)31 b(startup)f(\014les)g(are)h
+(read.)150 3362 y Fk(In)m(v)m(ok)m(ed)40 b(b)m(y)g(remote)h(shell)h
+(daemon)150 3509 y Fu(Bash)36 b(attempts)h(to)g(determine)f(when)f(it)i
+(is)f(b)s(eing)g(run)e(with)i(its)g(standard)g(input)f(connected)i(to)g
+(a)150 3618 y(net)m(w)m(ork)h(connection,)j(as)c(when)g(executed)h(b)m
+(y)f(the)h(remote)g(shell)g(daemon,)h(usually)e Ft(rshd)p
+Fu(,)h(or)g(the)150 3728 y(secure)c(shell)f(daemon)h
+Ft(sshd)p Fu(.)49 b(If)33 b(Bash)g(determines)h(it)g(is)f(b)s(eing)g
+(run)f(in)i(this)f(fashion,)h(it)g(reads)g(and)150 3837
+y(executes)29 b(commands)e(from)g Ft(~/.bashrc)p Fu(,)e(if)j(that)g
+(\014le)f(exists)h(and)f(is)g(readable.)41 b(It)27 b(will)h(not)f(do)h
+(this)f(if)150 3947 y(in)m(v)m(ok)m(ed)k(as)f Ft(sh)p
+Fu(.)40 b(The)29 b Ft(--norc)f Fu(option)i(ma)m(y)g(b)s(e)f(used)f(to)j
+(inhibit)e(this)g(b)s(eha)m(vior,)h(and)f(the)h Ft(--rcfile)150
+4057 y Fu(option)36 b(ma)m(y)g(b)s(e)e(used)h(to)h(force)g(another)f
+(\014le)h(to)g(b)s(e)e(read,)j(but)d(neither)i Ft(rshd)e
+Fu(nor)h Ft(sshd)f Fu(generally)150 4166 y(in)m(v)m(ok)m(e)e(the)f
+(shell)f(with)h(those)f(options)h(or)f(allo)m(w)i(them)f(to)g(b)s(e)e
+(sp)s(eci\014ed.)150 4375 y Fk(In)m(v)m(ok)m(ed)40 b(with)g(unequal)h
+(e\013ectiv)m(e)e(and)i(real)g Fg(uid/gid)p Fk(s)150
+4522 y Fu(If)34 b(Bash)h(is)g(started)g(with)f(the)h(e\013ectiv)m(e)i
+(user)d(\(group\))h(id)f(not)h(equal)g(to)g(the)g(real)g(user)f
+(\(group\))h(id,)150 4631 y(and)26 b(the)i Ft(-p)e Fu(option)h(is)g
+(not)h(supplied,)e(no)h(startup)g(\014les)g(are)g(read,)h(shell)f
+(functions)g(are)g(not)g(inherited)150 4741 y(from)41
+b(the)g(en)m(vironmen)m(t,)j(the)d Ft(SHELLOPTS)p Fu(,)h
+Ft(BASHOPTS)p Fu(,)g Ft(CDPATH)p Fu(,)g(and)e Ft(GLOBIGNORE)e
+Fu(v)-5 b(ariables,)45 b(if)150 4850 y(they)28 b(app)s(ear)f(in)h(the)g
+(en)m(vironmen)m(t,)i(are)e(ignored,)h(and)e(the)h(e\013ectiv)m(e)j
+(user)c(id)h(is)g(set)g(to)h(the)f(real)h(user)150 4960
+y(id.)62 b(If)38 b(the)f Ft(-p)h Fu(option)g(is)f(supplied)g(at)h(in)m
+(v)m(o)s(cation,)k(the)c(startup)f(b)s(eha)m(vior)h(is)g(the)g(same,)i
+(but)d(the)150 5070 y(e\013ectiv)m(e)c(user)d(id)g(is)g(not)h(reset.)
+150 5324 y Fs(6.3)68 b(In)l(teractiv)l(e)47 b(Shells)p
+eop end
+%%Page: 90 96
+TeXDict begin 90 95 bop 150 -116 a Fu(Chapter)30 b(6:)41
+b(Bash)30 b(F)-8 b(eatures)2484 b(90)150 299 y Fk(6.3.1)63
+b(What)40 b(is)h(an)g(In)m(teractiv)m(e)e(Shell?)150
+446 y Fu(An)g(in)m(teractiv)m(e)k(shell)d(is)g(one)g(started)g(without)
+g(non-option)g(argumen)m(ts,)j(unless)c Ft(-s)h Fu(is)f(sp)s
+(eci\014ed,)150 555 y(without)30 b(sp)s(ecifying)g(the)g
+Ft(-c)f Fu(option,)h(and)g(whose)f(input)g(and)g(error)h(output)f(are)h
+(b)s(oth)f(connected)i(to)150 665 y(terminals)g(\(as)g(determined)f(b)m
+(y)g Ft(isatty\(3\))p Fu(\),)e(or)j(one)f(started)h(with)f(the)h
+Ft(-i)f Fu(option.)275 808 y(An)g(in)m(teractiv)m(e)j(shell)d
+(generally)i(reads)e(from)g(and)g(writes)g(to)h(a)g(user's)f(terminal.)
+275 952 y(The)i Ft(-s)g Fu(in)m(v)m(o)s(cation)j(option)f(ma)m(y)f(b)s
+(e)g(used)f(to)i(set)f(the)g(p)s(ositional)h(parameters)f(when)f(an)h
+(in)m(ter-)150 1061 y(activ)m(e)g(shell)d(is)h(started.)150
+1269 y Fk(6.3.2)63 b(Is)41 b(this)g(Shell)g(In)m(teractiv)m(e?)150
+1416 y Fu(T)-8 b(o)30 b(determine)g(within)f(a)h(startup)g(script)f
+(whether)g(or)h(not)g(Bash)g(is)g(running)e(in)m(teractiv)m(ely)-8
+b(,)33 b(test)e(the)150 1526 y(v)-5 b(alue)30 b(of)g(the)f(`)p
+Ft(-)p Fu(')h(sp)s(ecial)g(parameter.)41 b(It)29 b(con)m(tains)i
+Ft(i)e Fu(when)g(the)g(shell)h(is)f(in)m(teractiv)m(e.)44
+b(F)-8 b(or)30 b(example:)390 1669 y Ft(case)47 b("$-")f(in)390
+1779 y(*i*\))h(echo)f(This)h(shell)f(is)h(interactive)e(;;)390
+1888 y(*\))i(echo)g(This)f(shell)h(is)g(not)g(interactive)e(;;)390
+1998 y(esac)275 2141 y Fu(Alternativ)m(ely)-8 b(,)28
+b(startup)23 b(scripts)h(ma)m(y)g(examine)g(the)g(v)-5
+b(ariable)25 b Ft(PS1)p Fu(;)g(it)g(is)e(unset)h(in)f(non-in)m
+(teractiv)m(e)150 2251 y(shells,)31 b(and)e(set)i(in)f(in)m(teractiv)m
+(e)k(shells.)40 b(Th)m(us:)390 2394 y Ft(if)47 b([)h(-z)f("$PS1")f(];)h
+(then)772 2503 y(echo)f(This)h(shell)f(is)i(not)f(interactive)390
+2613 y(else)772 2723 y(echo)f(This)h(shell)f(is)i(interactive)390
+2832 y(fi)150 3040 y Fk(6.3.3)63 b(In)m(teractiv)m(e)38
+b(Shell)k(Beha)m(vior)150 3187 y Fu(When)30 b(the)h(shell)f(is)h
+(running)d(in)m(teractiv)m(ely)-8 b(,)34 b(it)d(c)m(hanges)h(its)f(b)s
+(eha)m(vior)f(in)g(sev)m(eral)i(w)m(a)m(ys.)199 3330
+y(1.)61 b(Startup)37 b(\014les)g(are)h(read)f(and)g(executed)h(as)f
+(describ)s(ed)g(in)g(Section)h(6.2)g([Bash)g(Startup)e(Files],)330
+3440 y(page)31 b(88.)199 3579 y(2.)61 b(Job)32 b(Con)m(trol)h(\(see)g
+(Chapter)e(7)i([Job)f(Con)m(trol],)i(page)f(107\))h(is)e(enabled)g(b)m
+(y)g(default.)46 b(When)32 b(job)330 3689 y(con)m(trol)j(is)f(in)f
+(e\013ect,)k(Bash)d(ignores)g(the)g(k)m(eyb)s(oard-generated)h(job)e
+(con)m(trol)i(signals)g Ft(SIGTTIN)p Fu(,)330 3798 y
+Ft(SIGTTOU)p Fu(,)29 b(and)g Ft(SIGTSTP)p Fu(.)199 3937
+y(3.)61 b(Bash)25 b(expands)e(and)h(displa)m(ys)h Ft(PS1)e
+Fu(b)s(efore)h(reading)h(the)f(\014rst)g(line)h(of)f(a)h(command,)h
+(and)e(expands)330 4047 y(and)33 b(displa)m(ys)h Ft(PS2)f
+Fu(b)s(efore)h(reading)g(the)g(second)g(and)f(subsequen)m(t)g(lines)i
+(of)f(a)g(m)m(ulti-line)h(com-)330 4156 y(mand.)42 b(Bash)31
+b(expands)f(and)h(displa)m(ys)g Ft(PS0)f Fu(after)h(it)h(reads)f(a)g
+(command)g(but)f(b)s(efore)h(executing)330 4266 y(it.)62
+b(See)38 b(Section)g(6.9)h([Con)m(trolling)g(the)e(Prompt],)j(page)e
+(98,)i(for)d(a)h(complete)h(list)f(of)g(prompt)330 4375
+y(string)30 b(escap)s(e)h(sequences.)199 4514 y(4.)61
+b(Bash)28 b(executes)h(the)e(v)-5 b(alues)28 b(of)g(the)g(set)g(elemen)
+m(ts)h(of)f(the)g Ft(PROMPT_COMMANDS)23 b Fu(arra)m(y)28
+b(v)-5 b(ariable)29 b(as)330 4624 y(commands)e(b)s(efore)f(prin)m(ting)
+h(the)g(primary)g(prompt,)g Ft($PS1)f Fu(\(see)i(Section)f(5.2)i([Bash)
+e(V)-8 b(ariables],)330 4733 y(page)31 b(73\).)199 4872
+y(5.)61 b(Readline)27 b(\(see)g(Chapter)e(8)h([Command)g(Line)g
+(Editing],)h(page)g(111\))g(is)f(used)g(to)g(read)g(commands)330
+4982 y(from)k(the)g(user's)g(terminal.)199 5121 y(6.)61
+b(Bash)36 b(insp)s(ects)g(the)h(v)-5 b(alue)37 b(of)f(the)g
+Ft(ignoreeof)e Fu(option)j(to)g Ft(set)29 b(-o)36 b Fu(instead)h(of)f
+(exiting)i(imme-)330 5230 y(diately)f(when)e(it)i(receiv)m(es)h(an)e
+Ft(EOF)f Fu(on)h(its)g(standard)f(input)g(when)h(reading)g(a)g(command)
+g(\(see)330 5340 y(Section)31 b(4.3.1)h([The)e(Set)h(Builtin],)g(page)g
+(62\).)p eop end
+%%Page: 91 97
+TeXDict begin 91 96 bop 150 -116 a Fu(Chapter)30 b(6:)41
+b(Bash)30 b(F)-8 b(eatures)2484 b(91)199 299 y(7.)61
+b(Command)43 b(history)h(\(see)h(Section)g(9.1)g([Bash)f(History)h(F)-8
+b(acilities],)51 b(page)45 b(146\))h(and)d(history)330
+408 y(expansion)h(\(see)i(Section)f(9.3)h([History)g(In)m(teraction],)k
+(page)45 b(148\))h(are)f(enabled)g(b)m(y)f(default.)330
+518 y(Bash)28 b(will)g(sa)m(v)m(e)h(the)f(command)f(history)h(to)g(the)
+g(\014le)g(named)f(b)m(y)h Ft($HISTFILE)d Fu(when)h(a)i(shell)g(with)
+330 628 y(history)i(enabled)h(exits.)199 762 y(8.)61
+b(Alias)31 b(expansion)g(\(see)g(Section)g(6.6)g([Aliases],)i(page)e
+(94\))h(is)e(p)s(erformed)f(b)m(y)h(default.)199 896
+y(9.)61 b(In)24 b(the)g(absence)h(of)f(an)m(y)h(traps,)g(Bash)g
+(ignores)f Ft(SIGTERM)f Fu(\(see)i(Section)g(3.7.6)h([Signals],)g(page)
+f(42\).)154 1030 y(10.)61 b(In)29 b(the)g(absence)h(of)g(an)m(y)g
+(traps,)f Ft(SIGINT)f Fu(is)h(caugh)m(t)i(and)e(handled)f(\(see)j
+(Section)f(3.7.6)h([Signals],)330 1140 y(page)g(42\).)42
+b Ft(SIGINT)29 b Fu(will)h(in)m(terrupt)g(some)h(shell)g(builtins.)154
+1274 y(11.)61 b(An)40 b(in)m(teractiv)m(e)j(login)e(shell)g(sends)e(a)i
+Ft(SIGHUP)d Fu(to)j(all)g(jobs)f(on)g(exit)h(if)g(the)f
+Ft(huponexit)e Fu(shell)330 1383 y(option)31 b(has)f(b)s(een)g(enabled)
+g(\(see)h(Section)g(3.7.6)i([Signals],)e(page)g(42\).)154
+1517 y(12.)61 b(The)29 b Ft(-n)g Fu(in)m(v)m(o)s(cation)j(option)e(is)g
+(ignored,)g(and)f(`)p Ft(set)h(-n)p Fu(')f(has)h(no)f(e\013ect)j(\(see)
+e(Section)h(4.3.1)g([The)330 1627 y(Set)g(Builtin],)g(page)g(62\).)154
+1761 y(13.)61 b(Bash)32 b(will)g(c)m(hec)m(k)i(for)e(mail)g(p)s(erio)s
+(dically)-8 b(,)34 b(dep)s(ending)c(on)i(the)g(v)-5 b(alues)32
+b(of)g(the)h Ft(MAIL)p Fu(,)e Ft(MAILPATH)p Fu(,)330
+1871 y(and)f Ft(MAILCHECK)e Fu(shell)i(v)-5 b(ariables)31
+b(\(see)h(Section)f(5.2)g([Bash)g(V)-8 b(ariables],)32
+b(page)f(73\).)154 2005 y(14.)61 b(Expansion)32 b(errors)h(due)f(to)i
+(references)f(to)h(un)m(b)s(ound)c(shell)j(v)-5 b(ariables)34
+b(after)g(`)p Ft(set)29 b(-u)p Fu(')k(has)g(b)s(een)330
+2114 y(enabled)d(will)h(not)g(cause)g(the)f(shell)h(to)g(exit)g(\(see)g
+(Section)h(4.3.1)g([The)e(Set)h(Builtin],)g(page)g(62\).)154
+2248 y(15.)61 b(The)48 b(shell)h(will)f(not)h(exit)g(on)g(expansion)f
+(errors)g(caused)g(b)m(y)h Fr(v)-5 b(ar)54 b Fu(b)s(eing)48
+b(unset)g(or)h(n)m(ull)f(in)330 2358 y Ft(${)p Fj(var)p
+Ft(:?)p Fj(word)p Ft(})27 b Fu(expansions)j(\(see)h(Section)h(3.5.3)g
+([Shell)e(P)m(arameter)i(Expansion],)e(page)h(25\).)154
+2492 y(16.)61 b(Redirection)31 b(errors)f(encoun)m(tered)h(b)m(y)f
+(shell)h(builtins)f(will)g(not)h(cause)g(the)f(shell)h(to)g(exit.)154
+2626 y(17.)61 b(When)26 b(running)f(in)i Fm(posix)e Fu(mo)s(de,)j(a)f
+(sp)s(ecial)g(builtin)f(returning)g(an)g(error)h(status)g(will)g(not)f
+(cause)330 2736 y(the)31 b(shell)f(to)h(exit)h(\(see)f(Section)g(6.11)h
+([Bash)f(POSIX)e(Mo)s(de],)i(page)g(101\).)154 2870 y(18.)61
+b(A)34 b(failed)g Ft(exec)f Fu(will)h(not)g(cause)g(the)g(shell)g(to)g
+(exit)h(\(see)f(Section)h(4.1)g([Bourne)f(Shell)f(Builtins],)330
+2980 y(page)e(44\).)154 3114 y(19.)61 b(P)m(arser)31
+b(syn)m(tax)f(errors)g(will)h(not)g(cause)g(the)f(shell)h(to)g(exit.)
+154 3248 y(20.)61 b(Simple)21 b(sp)s(elling)h(correction)g(for)g
+(directory)g(argumen)m(ts)f(to)i(the)e Ft(cd)g Fu(builtin)g(is)h
+(enabled)f(b)m(y)h(default)330 3357 y(\(see)35 b(the)g(description)f
+(of)h(the)f Ft(cdspell)f Fu(option)h(to)i(the)e Ft(shopt)f
+Fu(builtin)h(in)g(Section)h(4.3.2)h([The)330 3467 y(Shopt)30
+b(Builtin],)h(page)g(66\).)154 3601 y(21.)61 b(The)42
+b(shell)h(will)g(c)m(hec)m(k)h(the)f(v)-5 b(alue)43 b(of)f(the)h
+Ft(TMOUT)e Fu(v)-5 b(ariable)44 b(and)e(exit)h(if)g(a)g(command)f(is)h
+(not)330 3711 y(read)30 b(within)g(the)g(sp)s(eci\014ed)f(n)m(um)m(b)s
+(er)g(of)i(seconds)f(after)g(prin)m(ting)g Ft($PS1)f
+Fu(\(see)i(Section)g(5.2)h([Bash)330 3820 y(V)-8 b(ariables],)32
+b(page)f(73\).)150 4060 y Fs(6.4)68 b(Bash)45 b(Conditional)h
+(Expressions)150 4220 y Fu(Conditional)26 b(expressions)g(are)g(used)f
+(b)m(y)g(the)h Ft([[)f Fu(comp)s(ound)g(command)g(and)g(the)h
+Ft(test)f Fu(and)g Ft([)g Fu(builtin)150 4329 y(commands.)50
+b(The)33 b Ft(test)g Fu(and)f Ft([)i Fu(commands)f(determine)h(their)f
+(b)s(eha)m(vior)h(based)f(on)h(the)f(n)m(um)m(b)s(er)g(of)150
+4439 y(argumen)m(ts;)28 b(see)f(the)f(descriptions)g(of)g(those)g
+(commands)g(for)g(an)m(y)g(other)h(command-sp)s(eci\014c)e(actions.)275
+4573 y(Expressions)d(ma)m(y)h(b)s(e)g(unary)f(or)h(binary)-8
+b(,)24 b(and)f(are)g(formed)g(from)g(the)g(follo)m(wing)h(primaries.)38
+b(Unary)150 4682 y(expressions)c(are)g(often)g(used)g(to)g(examine)h
+(the)f(status)g(of)h(a)f(\014le.)52 b(There)33 b(are)h(string)g(op)s
+(erators)h(and)150 4792 y(n)m(umeric)c(comparison)g(op)s(erators)h(as)f
+(w)m(ell.)44 b(Bash)31 b(handles)g(sev)m(eral)h(\014lenames)g(sp)s
+(ecially)g(when)e(they)150 4902 y(are)35 b(used)e(in)i(expressions.)52
+b(If)34 b(the)h(op)s(erating)f(system)h(on)f(whic)m(h)g(Bash)h(is)f
+(running)f(pro)m(vides)h(these)150 5011 y(sp)s(ecial)22
+b(\014les,)i(Bash)e(will)g(use)f(them;)k(otherwise)d(it)g(will)g(em)m
+(ulate)h(them)f(in)m(ternally)h(with)e(this)h(b)s(eha)m(vior:)150
+5121 y(If)27 b(the)g Fr(\014le)33 b Fu(argumen)m(t)27
+b(to)h(one)g(of)f(the)h(primaries)f(is)g(of)h(the)f(form)g
+Ft(/dev/fd/)p Fj(N)p Fu(,)e(then)i(\014le)h(descriptor)f
+Fr(N)150 5230 y Fu(is)g(c)m(hec)m(k)m(ed.)42 b(If)26
+b(the)h Fr(\014le)32 b Fu(argumen)m(t)c(to)f(one)h(of)f(the)g
+(primaries)f(is)h(one)h(of)f Ft(/dev/stdin)p Fu(,)e Ft(/dev/stdout)p
+Fu(,)150 5340 y(or)30 b Ft(/dev/stderr)p Fu(,)e(\014le)i(descriptor)h
+(0,)g(1,)g(or)f(2,)h(resp)s(ectiv)m(ely)-8 b(,)32 b(is)f(c)m(hec)m(k)m
+(ed.)p eop end
+%%Page: 92 98
+TeXDict begin 92 97 bop 150 -116 a Fu(Chapter)30 b(6:)41
+b(Bash)30 b(F)-8 b(eatures)2484 b(92)275 299 y(When)37
+b(used)g(with)g Ft([[)p Fu(,)i(the)f(`)p Ft(<)p Fu(')g(and)f(`)p
+Ft(>)p Fu(')h(op)s(erators)g(sort)g(lexicographically)i(using)d(the)h
+(curren)m(t)150 408 y(lo)s(cale.)k(The)30 b Ft(test)f
+Fu(command)i(uses)f(ASCI)s(I)e(ordering.)275 542 y(Unless)44
+b(otherwise)h(sp)s(eci\014ed,)j(primaries)c(that)h(op)s(erate)g(on)g
+(\014les)f(follo)m(w)i(sym)m(b)s(olic)f(links)g(and)150
+651 y(op)s(erate)31 b(on)f(the)h(target)h(of)e(the)h(link,)f(rather)h
+(than)f(the)g(link)h(itself.)150 808 y Ft(-a)f Fj(file)162
+b Fu(T)-8 b(rue)30 b(if)g Fr(\014le)36 b Fu(exists.)150
+965 y Ft(-b)30 b Fj(file)162 b Fu(T)-8 b(rue)30 b(if)g
+Fr(\014le)36 b Fu(exists)31 b(and)f(is)g(a)h(blo)s(c)m(k)g(sp)s(ecial)g
+(\014le.)150 1122 y Ft(-c)f Fj(file)162 b Fu(T)-8 b(rue)30
+b(if)g Fr(\014le)36 b Fu(exists)31 b(and)f(is)g(a)h(c)m(haracter)h(sp)s
+(ecial)f(\014le.)150 1279 y Ft(-d)f Fj(file)162 b Fu(T)-8
+b(rue)30 b(if)g Fr(\014le)36 b Fu(exists)31 b(and)f(is)g(a)h(directory)
+-8 b(.)150 1436 y Ft(-e)30 b Fj(file)162 b Fu(T)-8 b(rue)30
+b(if)g Fr(\014le)36 b Fu(exists.)150 1592 y Ft(-f)30
+b Fj(file)162 b Fu(T)-8 b(rue)30 b(if)g Fr(\014le)36
+b Fu(exists)31 b(and)f(is)g(a)h(regular)f(\014le.)150
+1749 y Ft(-g)g Fj(file)162 b Fu(T)-8 b(rue)30 b(if)g
+Fr(\014le)36 b Fu(exists)31 b(and)f(its)g(set-group-id)h(bit)g(is)f
+(set.)150 1906 y Ft(-h)g Fj(file)162 b Fu(T)-8 b(rue)30
+b(if)g Fr(\014le)36 b Fu(exists)31 b(and)f(is)g(a)h(sym)m(b)s(olic)g
+(link.)150 2063 y Ft(-k)f Fj(file)162 b Fu(T)-8 b(rue)30
+b(if)g Fr(\014le)36 b Fu(exists)31 b(and)f(its)g Ft(")p
+Fu(stic)m(ky)p Ft(")h Fu(bit)g(is)f(set.)150 2220 y Ft(-p)g
+Fj(file)162 b Fu(T)-8 b(rue)30 b(if)g Fr(\014le)36 b
+Fu(exists)31 b(and)f(is)g(a)h(named)f(pip)s(e)f(\(FIF)m(O\).)150
+2377 y Ft(-r)h Fj(file)162 b Fu(T)-8 b(rue)30 b(if)g
+Fr(\014le)36 b Fu(exists)31 b(and)f(is)g(readable.)150
+2534 y Ft(-s)g Fj(file)162 b Fu(T)-8 b(rue)30 b(if)g
+Fr(\014le)36 b Fu(exists)31 b(and)f(has)g(a)g(size)i(greater)f(than)f
+(zero.)150 2690 y Ft(-t)g Fj(fd)258 b Fu(T)-8 b(rue)30
+b(if)g(\014le)h(descriptor)f Fr(fd)j Fu(is)e(op)s(en)e(and)h(refers)g
+(to)h(a)g(terminal.)150 2847 y Ft(-u)f Fj(file)162 b
+Fu(T)-8 b(rue)30 b(if)g Fr(\014le)36 b Fu(exists)31 b(and)f(its)g
+(set-user-id)h(bit)f(is)h(set.)150 3004 y Ft(-w)f Fj(file)162
+b Fu(T)-8 b(rue)30 b(if)g Fr(\014le)36 b Fu(exists)31
+b(and)f(is)g(writable.)150 3161 y Ft(-x)g Fj(file)162
+b Fu(T)-8 b(rue)30 b(if)g Fr(\014le)36 b Fu(exists)31
+b(and)f(is)g(executable.)150 3318 y Ft(-G)g Fj(file)162
+b Fu(T)-8 b(rue)30 b(if)g Fr(\014le)36 b Fu(exists)31
+b(and)f(is)g(o)m(wned)g(b)m(y)h(the)f(e\013ectiv)m(e)j(group)d(id.)150
+3475 y Ft(-L)g Fj(file)162 b Fu(T)-8 b(rue)30 b(if)g
+Fr(\014le)36 b Fu(exists)31 b(and)f(is)g(a)h(sym)m(b)s(olic)g(link.)150
+3632 y Ft(-N)f Fj(file)162 b Fu(T)-8 b(rue)30 b(if)g
+Fr(\014le)36 b Fu(exists)31 b(and)f(has)g(b)s(een)f(mo)s(di\014ed)h
+(since)g(it)h(w)m(as)g(last)g(read.)150 3789 y Ft(-O)f
+Fj(file)162 b Fu(T)-8 b(rue)30 b(if)g Fr(\014le)36 b
+Fu(exists)31 b(and)f(is)g(o)m(wned)g(b)m(y)h(the)f(e\013ectiv)m(e)j
+(user)d(id.)150 3945 y Ft(-S)g Fj(file)162 b Fu(T)-8
+b(rue)30 b(if)g Fr(\014le)36 b Fu(exists)31 b(and)f(is)g(a)h(so)s(c)m
+(k)m(et.)150 4102 y Fj(file1)e Ft(-ef)g Fj(file2)630
+4212 y Fu(T)-8 b(rue)30 b(if)g Fr(\014le1)38 b Fu(and)30
+b Fr(\014le2)38 b Fu(refer)30 b(to)i(the)e(same)h(device)g(and)f(ino)s
+(de)g(n)m(um)m(b)s(ers.)150 4369 y Fj(file1)f Ft(-nt)g
+Fj(file2)630 4478 y Fu(T)-8 b(rue)23 b(if)h Fr(\014le1)32
+b Fu(is)24 b(new)m(er)g(\(according)h(to)g(mo)s(di\014cation)f(date\))h
+(than)f Fr(\014le2)p Fu(,)i(or)e(if)g Fr(\014le1)31 b
+Fu(exists)630 4588 y(and)f Fr(\014le2)38 b Fu(do)s(es)30
+b(not.)150 4745 y Fj(file1)f Ft(-ot)g Fj(file2)630 4854
+y Fu(T)-8 b(rue)30 b(if)g Fr(\014le1)38 b Fu(is)31 b(older)f(than)g
+Fr(\014le2)p Fu(,)i(or)e(if)g Fr(\014le2)38 b Fu(exists)31
+b(and)f Fr(\014le1)38 b Fu(do)s(es)30 b(not.)150 5011
+y Ft(-o)g Fj(optname)630 5121 y Fu(T)-8 b(rue)41 b(if)g(the)g(shell)h
+(option)f Fr(optname)47 b Fu(is)41 b(enabled.)73 b(The)41
+b(list)h(of)f(options)h(app)s(ears)e(in)630 5230 y(the)33
+b(description)h(of)f(the)g Ft(-o)g Fu(option)g(to)h(the)g
+Ft(set)e Fu(builtin)h(\(see)h(Section)g(4.3.1)h([The)e(Set)630
+5340 y(Builtin],)e(page)g(62\).)p eop end
+%%Page: 93 99
+TeXDict begin 93 98 bop 150 -116 a Fu(Chapter)30 b(6:)41
+b(Bash)30 b(F)-8 b(eatures)2484 b(93)150 299 y Ft(-v)30
+b Fj(varname)630 408 y Fu(T)-8 b(rue)30 b(if)g(the)h(shell)f(v)-5
+b(ariable)32 b Fr(v)-5 b(arname)35 b Fu(is)30 b(set)h(\(has)g(b)s(een)e
+(assigned)i(a)g(v)-5 b(alue\).)150 565 y Ft(-R)30 b Fj(varname)630
+674 y Fu(T)-8 b(rue)30 b(if)g(the)h(shell)f(v)-5 b(ariable)32
+b Fr(v)-5 b(arname)35 b Fu(is)30 b(set)h(and)f(is)h(a)f(name)h
+(reference.)150 830 y Ft(-z)f Fj(string)66 b Fu(T)-8
+b(rue)30 b(if)g(the)h(length)g(of)f Fr(string)38 b Fu(is)31
+b(zero.)150 987 y Ft(-n)f Fj(string)150 1096 y(string)192
+b Fu(T)-8 b(rue)30 b(if)g(the)h(length)g(of)f Fr(string)38
+b Fu(is)31 b(non-zero.)150 1252 y Fj(string1)d Ft(==)i
+Fj(string2)150 1362 y(string1)e Ft(=)i Fj(string2)630
+1472 y Fu(T)-8 b(rue)43 b(if)h(the)g(strings)g(are)g(equal.)82
+b(When)44 b(used)f(with)g(the)h Ft([[)g Fu(command,)j(this)d(p)s(er-)
+630 1581 y(forms)d(pattern)g(matc)m(hing)i(as)f(describ)s(ed)e(ab)s(o)m
+(v)m(e)j(\(see)f(Section)g(3.2.5.2)i([Conditional)630
+1691 y(Constructs],)30 b(page)h(11\).)630 1824 y(`)p
+Ft(=)p Fu(')g(should)e(b)s(e)h(used)f(with)h(the)h Ft(test)e
+Fu(command)h(for)g Fm(posix)g Fu(conformance.)150 1980
+y Fj(string1)e Ft(!=)i Fj(string2)630 2089 y Fu(T)-8
+b(rue)30 b(if)g(the)h(strings)f(are)h(not)f(equal.)150
+2246 y Fj(string1)e Ft(<)i Fj(string2)630 2355 y Fu(T)-8
+b(rue)30 b(if)g Fr(string1)38 b Fu(sorts)31 b(b)s(efore)f
+Fr(string2)38 b Fu(lexicographically)-8 b(.)150 2511
+y Fj(string1)28 b Ft(>)i Fj(string2)630 2621 y Fu(T)-8
+b(rue)30 b(if)g Fr(string1)38 b Fu(sorts)31 b(after)g
+Fr(string2)38 b Fu(lexicographically)-8 b(.)150 2777
+y Fj(arg1)29 b Ft(OP)h Fj(arg2)630 2887 y Ft(OP)j Fu(is)h(one)g(of)h(`)
+p Ft(-eq)p Fu(',)f(`)p Ft(-ne)p Fu(',)h(`)p Ft(-lt)p
+Fu(',)g(`)p Ft(-le)p Fu(',)f(`)p Ft(-gt)p Fu(',)h(or)f(`)p
+Ft(-ge)p Fu('.)51 b(These)34 b(arithmetic)h(binary)630
+2996 y(op)s(erators)h(return)e(true)i(if)f Fr(arg1)44
+b Fu(is)36 b(equal)g(to,)i(not)e(equal)g(to,)i(less)e(than,)h(less)f
+(than)f(or)630 3106 y(equal)29 b(to,)g(greater)h(than,)e(or)g(greater)i
+(than)d(or)i(equal)f(to)h Fr(arg2)p Fu(,)h(resp)s(ectiv)m(ely)-8
+b(.)42 b Fr(Arg1)36 b Fu(and)630 3215 y Fr(arg2)41 b
+Fu(ma)m(y)34 b(b)s(e)f(p)s(ositiv)m(e)h(or)f(negativ)m(e)j(in)m
+(tegers.)50 b(When)33 b(used)g(with)g(the)g Ft([[)g Fu(command,)630
+3325 y Fr(Arg1)41 b Fu(and)33 b Fr(Arg2)41 b Fu(are)33
+b(ev)-5 b(aluated)35 b(as)e(arithmetic)i(expressions)d(\(see)j(Section)
+f(6.5)g([Shell)630 3435 y(Arithmetic],)e(page)f(93\).)150
+3672 y Fs(6.5)68 b(Shell)45 b(Arithmetic)150 3832 y Fu(The)26
+b(shell)h(allo)m(ws)h(arithmetic)f(expressions)g(to)g(b)s(e)f(ev)-5
+b(aluated,)29 b(as)d(one)h(of)g(the)g(shell)f(expansions)h(or)f(b)m(y)
+150 3941 y(using)h(the)g Ft(\(\()g Fu(comp)s(ound)e(command,)j(the)g
+Ft(let)e Fu(builtin,)i(or)f(the)g Ft(-i)g Fu(option)h(to)f(the)h
+Ft(declare)d Fu(builtin.)275 4074 y(Ev)-5 b(aluation)27
+b(is)g(done)f(in)g(\014xed-width)g(in)m(tegers)i(with)e(no)h(c)m(hec)m
+(k)h(for)e(o)m(v)m(er\015o)m(w,)j(though)d(division)h(b)m(y)150
+4184 y(0)g(is)g(trapp)s(ed)f(and)h(\015agged)g(as)h(an)f(error.)39
+b(The)26 b(op)s(erators)h(and)g(their)g(precedence,)h(asso)s(ciativit)m
+(y)-8 b(,)32 b(and)150 4293 y(v)-5 b(alues)35 b(are)h(the)f(same)g(as)h
+(in)e(the)h(C)g(language.)56 b(The)35 b(follo)m(wing)h(list)g(of)f(op)s
+(erators)g(is)g(group)s(ed)f(in)m(to)150 4403 y(lev)m(els)27
+b(of)f(equal-precedence)i(op)s(erators.)39 b(The)25 b(lev)m(els)j(are)e
+(listed)h(in)e(order)h(of)g(decreasing)g(precedence.)150
+4559 y Fj(id)p Ft(++)j Fj(id)p Ft(--)67 b Fu(v)-5 b(ariable)31
+b(p)s(ost-incremen)m(t)g(and)f(p)s(ost-decremen)m(t)150
+4715 y Ft(++)p Fj(id)f Ft(--)p Fj(id)67 b Fu(v)-5 b(ariable)31
+b(pre-incremen)m(t)g(and)f(pre-decremen)m(t)150 4871
+y Ft(-)g(+)354 b Fu(unary)29 b(min)m(us)h(and)g(plus)150
+5028 y Ft(!)g(~)354 b Fu(logical)33 b(and)d(bit)m(wise)h(negation)150
+5184 y Ft(**)384 b Fu(exp)s(onen)m(tiation)150 5340 y
+Ft(*)30 b(/)g(\045)276 b Fu(m)m(ultiplication,)33 b(division,)d
+(remainder)p eop end
+%%Page: 94 100
+TeXDict begin 94 99 bop 150 -116 a Fu(Chapter)30 b(6:)41
+b(Bash)30 b(F)-8 b(eatures)2484 b(94)150 299 y Ft(+)30
+b(-)354 b Fu(addition,)31 b(subtraction)150 460 y Ft(<<)f(>>)258
+b Fu(left)31 b(and)f(righ)m(t)h(bit)m(wise)g(shifts)150
+620 y Ft(<=)f(>=)g(<)g(>)102 b Fu(comparison)150 781
+y Ft(==)30 b(!=)258 b Fu(equalit)m(y)32 b(and)e(inequalit)m(y)150
+942 y Ft(&)432 b Fu(bit)m(wise)31 b(AND)150 1103 y Ft(^)432
+b Fu(bit)m(wise)31 b(exclusiv)m(e)h(OR)150 1263 y Ft(|)432
+b Fu(bit)m(wise)31 b(OR)150 1424 y Ft(&&)384 b Fu(logical)33
+b(AND)150 1585 y Ft(||)384 b Fu(logical)33 b(OR)150 1746
+y Ft(expr)c(?)h(expr)f(:)h(expr)630 1855 y Fu(conditional)i(op)s
+(erator)150 2016 y Ft(=)e(*=)g(/=)g(\045=)f(+=)h(-=)g(<<=)f(>>=)h(&=)g
+(^=)f(|=)630 2126 y Fu(assignmen)m(t)150 2287 y Ft(expr1)g(,)h(expr2)
+630 2396 y Fu(comma)275 2558 y(Shell)38 b(v)-5 b(ariables)39
+b(are)g(allo)m(w)m(ed)i(as)e(op)s(erands;)i(parameter)e(expansion)g(is)
+f(p)s(erformed)g(b)s(efore)g(the)150 2667 y(expression)g(is)g(ev)-5
+b(aluated.)66 b(Within)38 b(an)h(expression,)h(shell)e(v)-5
+b(ariables)39 b(ma)m(y)g(also)g(b)s(e)f(referenced)g(b)m(y)150
+2777 y(name)31 b(without)f(using)g(the)h(parameter)g(expansion)f(syn)m
+(tax.)42 b(A)31 b(shell)f(v)-5 b(ariable)32 b(that)f(is)f(n)m(ull)h(or)
+f(unset)150 2886 y(ev)-5 b(aluates)41 b(to)f(0)g(when)e(referenced)h(b)
+m(y)g(name)h(without)f(using)g(the)g(parameter)h(expansion)f(syn)m
+(tax.)150 2996 y(The)c(v)-5 b(alue)37 b(of)f(a)h(v)-5
+b(ariable)36 b(is)g(ev)-5 b(aluated)38 b(as)e(an)g(arithmetic)h
+(expression)f(when)f(it)h(is)g(referenced,)i(or)150 3106
+y(when)31 b(a)i(v)-5 b(ariable)33 b(whic)m(h)f(has)g(b)s(een)f(giv)m
+(en)j(the)e Fr(in)m(teger)40 b Fu(attribute)33 b(using)f(`)p
+Ft(declare)d(-i)p Fu(')i(is)i(assigned)150 3215 y(a)j(v)-5
+b(alue.)58 b(A)36 b(n)m(ull)f(v)-5 b(alue)37 b(ev)-5
+b(aluates)37 b(to)g(0.)57 b(A)36 b(shell)g(v)-5 b(ariable)37
+b(need)e(not)h(ha)m(v)m(e)h(its)f Fr(in)m(teger)44 b
+Fu(attribute)150 3325 y(turned)29 b(on)h(to)i(b)s(e)d(used)h(in)g(an)g
+(expression.)275 3461 y(In)m(teger)41 b(constan)m(ts)g(follo)m(w)h(the)
+e(C)g(language)i(de\014nition,)g(without)f(su\016xes)e(or)h(c)m
+(haracter)i(con-)150 3570 y(stan)m(ts.)f(Constan)m(ts)31
+b(with)f(a)g(leading)h(0)f(are)h(in)m(terpreted)f(as)g(o)s(ctal)i(n)m
+(um)m(b)s(ers.)39 b(A)30 b(leading)h(`)p Ft(0x)p Fu(')f(or)g(`)p
+Ft(0X)p Fu(')150 3680 y(denotes)g(hexadecimal.)42 b(Otherwise,)30
+b(n)m(um)m(b)s(ers)f(tak)m(e)i(the)f(form)g([)p Fr(base)5
+b Ft(#)p Fu(])p Fr(n)p Fu(,)30 b(where)f(the)i(optional)g
+Fr(base)150 3789 y Fu(is)e(a)h(decimal)g(n)m(um)m(b)s(er)e(b)s(et)m(w)m
+(een)h(2)h(and)e(64)i(represen)m(ting)g(the)f(arithmetic)i(base,)e(and)
+g Fr(n)g Fu(is)g(a)g(n)m(um)m(b)s(er)150 3899 y(in)g(that)i(base.)40
+b(If)30 b Fr(base)5 b Ft(#)30 b Fu(is)f(omitted,)i(then)f(base)g(10)g
+(is)g(used.)40 b(When)30 b(sp)s(ecifying)f Fr(n)p Fu(,)h(if)f(a)i
+(non-digit)f(is)150 4008 y(required,)k(the)g(digits)h(greater)g(than)e
+(9)i(are)f(represen)m(ted)g(b)m(y)f(the)h(lo)m(w)m(ercase)j(letters,)f
+(the)e(upp)s(ercase)150 4118 y(letters,)26 b(`)p Ft(@)p
+Fu(',)g(and)d(`)p Ft(_)p Fu(',)i(in)e(that)i(order.)38
+b(If)23 b Fr(base)29 b Fu(is)23 b(less)h(than)g(or)f(equal)h(to)h(36,)h
+(lo)m(w)m(ercase)g(and)d(upp)s(ercase)150 4228 y(letters)32
+b(ma)m(y)f(b)s(e)e(used)h(in)m(terc)m(hangeably)i(to)f(represen)m(t)g
+(n)m(um)m(b)s(ers)e(b)s(et)m(w)m(een)i(10)g(and)f(35.)275
+4364 y(Op)s(erators)44 b(are)h(ev)-5 b(aluated)46 b(in)f(order)f(of)h
+(precedence.)85 b(Sub-expressions)44 b(in)g(paren)m(theses)i(are)150
+4473 y(ev)-5 b(aluated)32 b(\014rst)d(and)h(ma)m(y)h(o)m(v)m(erride)g
+(the)g(precedence)g(rules)f(ab)s(o)m(v)m(e.)150 4716
+y Fs(6.6)68 b(Aliases)150 4875 y Fr(Aliases)41 b Fu(allo)m(w)d(a)f
+(string)f(to)h(b)s(e)f(substituted)g(for)g(a)g(w)m(ord)g(when)g(it)h
+(is)f(used)f(as)i(the)g(\014rst)e(w)m(ord)h(of)h(a)150
+4985 y(simple)32 b(command.)45 b(The)31 b(shell)i(main)m(tains)f(a)h
+(list)f(of)g(aliases)i(that)e(ma)m(y)h(b)s(e)e(set)h(and)g(unset)f
+(with)h(the)150 5095 y Ft(alias)d Fu(and)h Ft(unalias)e
+Fu(builtin)i(commands.)275 5230 y(The)f(\014rst)f(w)m(ord)i(of)f(eac)m
+(h)i(simple)f(command,)g(if)f(unquoted,)g(is)h(c)m(hec)m(k)m(ed)h(to)g
+(see)f(if)g(it)g(has)f(an)g(alias.)150 5340 y(If)24 b(so,)i(that)g(w)m
+(ord)e(is)h(replaced)g(b)m(y)f(the)h(text)h(of)e(the)h(alias.)40
+b(The)24 b(c)m(haracters)i(`)p Ft(/)p Fu(',)h(`)p Ft($)p
+Fu(',)f(`)p Ft(`)p Fu(',)g(`)p Ft(=)p Fu(')f(and)f(an)m(y)h(of)p
+eop end
+%%Page: 95 101
+TeXDict begin 95 100 bop 150 -116 a Fu(Chapter)30 b(6:)41
+b(Bash)30 b(F)-8 b(eatures)2484 b(95)150 299 y(the)23
+b(shell)g(metac)m(haracters)i(or)e(quoting)g(c)m(haracters)h(listed)g
+(ab)s(o)m(v)m(e)g(ma)m(y)f(not)g(app)s(ear)f(in)h(an)g(alias)h(name.)
+150 408 y(The)e(replacemen)m(t)h(text)g(ma)m(y)g(con)m(tain)h(an)m(y)e
+(v)-5 b(alid)23 b(shell)f(input,)h(including)f(shell)g(metac)m
+(haracters.)40 b(The)150 518 y(\014rst)35 b(w)m(ord)g(of)h(the)g
+(replacemen)m(t)i(text)e(is)g(tested)h(for)e(aliases,)k(but)c(a)h(w)m
+(ord)g(that)g(is)g(iden)m(tical)i(to)e(an)150 628 y(alias)c(b)s(eing)f
+(expanded)f(is)h(not)g(expanded)f(a)h(second)g(time.)43
+b(This)30 b(means)h(that)g(one)g(ma)m(y)h(alias)g Ft(ls)e
+Fu(to)150 737 y Ft("ls)f(-F")p Fu(,)f(for)f(instance,)i(and)d(Bash)i
+(do)s(es)f(not)h(try)f(to)h(recursiv)m(ely)g(expand)e(the)i(replacemen)
+m(t)h(text.)40 b(If)150 847 y(the)31 b(last)h(c)m(haracter)h(of)e(the)h
+(alias)g(v)-5 b(alue)31 b(is)h(a)f Fr(blank)p Fu(,)g(then)g(the)g(next)
+h(command)e(w)m(ord)h(follo)m(wing)i(the)150 956 y(alias)f(is)e(also)h
+(c)m(hec)m(k)m(ed)i(for)d(alias)h(expansion.)275 1096
+y(Aliases)e(are)f(created)i(and)d(listed)i(with)f(the)g
+Ft(alias)f Fu(command,)h(and)g(remo)m(v)m(ed)h(with)f(the)g
+Ft(unalias)150 1206 y Fu(command.)275 1345 y(There)44
+b(is)h(no)g(mec)m(hanism)g(for)f(using)h(argumen)m(ts)g(in)f(the)h
+(replacemen)m(t)i(text,)i(as)d(in)e Ft(csh)p Fu(.)83
+b(If)150 1455 y(argumen)m(ts)37 b(are)h(needed,)g(a)g(shell)f(function)
+f(should)g(b)s(e)h(used)f(\(see)i(Section)g(3.3)g([Shell)f(F)-8
+b(unctions],)150 1564 y(page)31 b(18\).)275 1704 y(Aliases)i(are)h(not)
+e(expanded)g(when)g(the)h(shell)g(is)g(not)g(in)m(teractiv)m(e,)j
+(unless)c(the)h Ft(expand_aliases)150 1813 y Fu(shell)e(option)f(is)h
+(set)g(using)f Ft(shopt)f Fu(\(see)i(Section)g(4.3.2)h([The)e(Shopt)g
+(Builtin],)h(page)g(66\).)275 1953 y(The)38 b(rules)h(concerning)h(the)
+f(de\014nition)g(and)g(use)g(of)g(aliases)i(are)e(somewhat)h
+(confusing.)67 b(Bash)150 2063 y(alw)m(a)m(ys)37 b(reads)f(at)h(least)g
+(one)f(complete)i(line)e(of)g(input,)h(and)e(all)i(lines)f(that)g(mak)m
+(e)h(up)e(a)h(comp)s(ound)150 2172 y(command,)29 b(b)s(efore)g
+(executing)i(an)m(y)e(of)h(the)f(commands)g(on)g(that)h(line)f(or)h
+(the)f(comp)s(ound)f(command.)150 2282 y(Aliases)g(are)g(expanded)e
+(when)g(a)i(command)f(is)g(read,)h(not)f(when)f(it)i(is)f(executed.)41
+b(Therefore,)28 b(an)f(alias)150 2391 y(de\014nition)36
+b(app)s(earing)h(on)f(the)h(same)g(line)g(as)g(another)g(command)f(do)s
+(es)g(not)h(tak)m(e)i(e\013ect)f(un)m(til)f(the)150 2501
+y(next)i(line)g(of)g(input)f(is)h(read.)66 b(The)38 b(commands)h(follo)
+m(wing)h(the)f(alias)h(de\014nition)e(on)h(that)g(line)h(are)150
+2610 y(not)33 b(a\013ected)h(b)m(y)f(the)g(new)f(alias.)49
+b(This)32 b(b)s(eha)m(vior)h(is)g(also)g(an)g(issue)g(when)e(functions)
+i(are)g(executed.)150 2720 y(Aliases)c(are)g(expanded)e(when)g(a)i
+(function)e(de\014nition)h(is)g(read,)h(not)f(when)g(the)g(function)g
+(is)g(executed,)150 2830 y(b)s(ecause)36 b(a)h(function)f(de\014nition)
+f(is)i(itself)g(a)f(command.)58 b(As)36 b(a)h(consequence,)h(aliases)g
+(de\014ned)d(in)h(a)150 2939 y(function)28 b(are)h(not)g(a)m(v)-5
+b(ailable)31 b(un)m(til)e(after)g(that)g(function)f(is)g(executed.)41
+b(T)-8 b(o)29 b(b)s(e)f(safe,)i(alw)m(a)m(ys)g(put)e(alias)150
+3049 y(de\014nitions)i(on)g(a)h(separate)g(line,)g(and)f(do)g(not)h
+(use)f Ft(alias)f Fu(in)h(comp)s(ound)f(commands.)275
+3188 y(F)-8 b(or)31 b(almost)g(ev)m(ery)g(purp)s(ose,)e(shell)i
+(functions)f(are)g(preferred)g(o)m(v)m(er)h(aliases.)150
+3437 y Fs(6.7)68 b(Arra)l(ys)150 3596 y Fu(Bash)33 b(pro)m(vides)g
+(one-dimensional)g(indexed)f(and)h(asso)s(ciativ)m(e)i(arra)m(y)e(v)-5
+b(ariables.)49 b(An)m(y)33 b(v)-5 b(ariable)33 b(ma)m(y)150
+3706 y(b)s(e)e(used)h(as)g(an)g(indexed)f(arra)m(y;)j(the)e
+Ft(declare)e Fu(builtin)h(will)i(explicitly)g(declare)g(an)f(arra)m(y)
+-8 b(.)46 b(There)32 b(is)150 3815 y(no)h(maxim)m(um)g(limit)h(on)f
+(the)g(size)h(of)g(an)f(arra)m(y)-8 b(,)35 b(nor)d(an)m(y)i(requiremen)
+m(t)f(that)h(mem)m(b)s(ers)e(b)s(e)g(indexed)150 3925
+y(or)26 b(assigned)h(con)m(tiguously)-8 b(.)41 b(Indexed)25
+b(arra)m(ys)i(are)f(referenced)g(using)g(in)m(tegers)i(\(including)e
+(arithmetic)150 4034 y(expressions)38 b(\(see)h(Section)g(6.5)h([Shell)
+e(Arithmetic],)k(page)d(93\)\))h(and)d(are)i(zero-based;)k(asso)s
+(ciativ)m(e)150 4144 y(arra)m(ys)37 b(use)f(arbitrary)g(strings.)59
+b(Unless)36 b(otherwise)h(noted,)h(indexed)e(arra)m(y)h(indices)f(m)m
+(ust)g(b)s(e)g(non-)150 4254 y(negativ)m(e)d(in)m(tegers.)275
+4393 y(An)26 b(indexed)h(arra)m(y)h(is)f(created)h(automatically)j(if)c
+(an)m(y)g(v)-5 b(ariable)28 b(is)g(assigned)f(to)h(using)f(the)g(syn)m
+(tax)390 4533 y Fj(name)p Ft([)p Fj(subscript)p Ft(]=)p
+Fj(value)150 4672 y Fu(The)34 b Fr(subscript)h Fu(is)g(treated)g(as)g
+(an)f(arithmetic)i(expression)e(that)h(m)m(ust)g(ev)-5
+b(aluate)36 b(to)f(a)g(n)m(um)m(b)s(er.)51 b(T)-8 b(o)150
+4782 y(explicitly)32 b(declare)f(an)g(arra)m(y)-8 b(,)31
+b(use)390 4921 y Ft(declare)46 b(-a)h Fj(name)150 5061
+y Fu(The)30 b(syn)m(tax)390 5200 y Ft(declare)46 b(-a)h
+Fj(name)p Ft([)p Fj(subscript)p Ft(])150 5340 y Fu(is)30
+b(also)i(accepted;)g(the)e Fr(subscript)h Fu(is)g(ignored.)p
+eop end
+%%Page: 96 102
+TeXDict begin 96 101 bop 150 -116 a Fu(Chapter)30 b(6:)41
+b(Bash)30 b(F)-8 b(eatures)2484 b(96)150 299 y(Asso)s(ciativ)m(e)33
+b(arra)m(ys)d(are)h(created)h(using)390 427 y Ft(declare)46
+b(-A)h Fj(name)275 555 y Fu(A)m(ttributes)f(ma)m(y)h(b)s(e)e(sp)s
+(eci\014ed)g(for)h(an)g(arra)m(y)g(v)-5 b(ariable)47
+b(using)e(the)h Ft(declare)e Fu(and)h Ft(readonly)150
+664 y Fu(builtins.)40 b(Eac)m(h)31 b(attribute)g(applies)g(to)g(all)g
+(mem)m(b)s(ers)f(of)g(an)h(arra)m(y)-8 b(.)275 792 y(Arra)m(ys)30
+b(are)h(assigned)f(to)h(using)f(comp)s(ound)f(assignmen)m(ts)i(of)g
+(the)f(form)390 920 y Fj(name)p Ft(=\()p Fj(value1)44
+b(value2)j Ft(...)f(\))150 1048 y Fu(where)33 b(eac)m(h)i
+Fr(v)-5 b(alue)40 b Fu(ma)m(y)34 b(b)s(e)g(of)g(the)g(form)f
+Ft([)p Fj(subscript)p Ft(]=)p Fr(string)p Fu(.)48 b(Indexed)33
+b(arra)m(y)h(assignmen)m(ts)h(do)150 1157 y(not)26 b(require)f(an)m
+(ything)g(but)g Fr(string)p Fu(.)39 b(When)25 b(assigning)h(to)g
+(indexed)f(arra)m(ys,)i(if)e(the)h(optional)g(subscript)150
+1267 y(is)h(supplied,)f(that)h(index)g(is)f(assigned)h(to;)i(otherwise)
+e(the)g(index)g(of)f(the)h(elemen)m(t)i(assigned)d(is)h(the)g(last)150
+1377 y(index)j(assigned)h(to)g(b)m(y)f(the)g(statemen)m(t)j(plus)c
+(one.)41 b(Indexing)30 b(starts)h(at)g(zero.)275 1504
+y(Eac)m(h)26 b Fr(v)-5 b(alue)32 b Fu(in)26 b(the)h(list)g(undergo)s
+(es)e(all)i(the)g(shell)f(expansions)g(describ)s(ed)f(ab)s(o)m(v)m(e)j
+(\(see)f(Section)g(3.5)150 1614 y([Shell)j(Expansions],)h(page)g(22\).)
+275 1742 y(When)k(assigning)i(to)g(an)f(asso)s(ciativ)m(e)i(arra)m(y)-8
+b(,)39 b(the)d(w)m(ords)f(in)h(a)h(comp)s(ound)d(assignmen)m(t)j(ma)m
+(y)g(b)s(e)150 1851 y(either)31 b(assignmen)m(t)h(statemen)m(ts,)h(for)
+e(whic)m(h)g(the)g(subscript)f(is)h(required,)g(or)g(a)g(list)h(of)f(w)
+m(ords)f(that)i(is)150 1961 y(in)m(terpreted)g(as)g(a)g(sequence)f(of)h
+(alternating)h(k)m(eys)f(and)f(v)-5 b(alues:)44 b Fr(name)5
+b Fu(=\()p Fr(k)m(ey1)40 b(v)-5 b(alue1)40 b(k)m(ey2)g(v)-5
+b(alue2)156 2071 y Fu(.)22 b(.)g(.)47 b(\).)57 b(These)35
+b(are)i(treated)f(iden)m(tically)i(to)e Fr(name)5 b Fu(=\()36
+b([)p Fr(k)m(ey1)7 b Fu(]=)p Fr(v)-5 b(alue1)46 b Fu([)p
+Fr(k)m(ey2)7 b Fu(]=)p Fr(v)-5 b(alue2)51 b Fu(.)22 b(.)h(.)46
+b(\).)57 b(The)150 2180 y(\014rst)25 b(w)m(ord)f(in)h(the)h(list)g
+(determines)f(ho)m(w)g(the)h(remaining)f(w)m(ords)g(are)h(in)m
+(terpreted;)h(all)f(assignmen)m(ts)g(in)150 2290 y(a)31
+b(list)f(m)m(ust)h(b)s(e)e(of)h(the)h(same)f(t)m(yp)s(e.)41
+b(When)30 b(using)g(k)m(ey/v)-5 b(alue)32 b(pairs,)e(the)g(k)m(eys)h
+(ma)m(y)g(not)f(b)s(e)g(missing)150 2399 y(or)g(empt)m(y;)h(a)g
+(\014nal)f(missing)g(v)-5 b(alue)31 b(is)g(treated)g(lik)m(e)h(the)e
+(empt)m(y)h(string.)275 2527 y(This)f(syn)m(tax)j(is)e(also)i(accepted)
+g(b)m(y)f(the)f Ft(declare)f Fu(builtin.)44 b(Individual)31
+b(arra)m(y)h(elemen)m(ts)h(ma)m(y)g(b)s(e)150 2637 y(assigned)e(to)g
+(using)f(the)g Fj(name)p Ft([)p Fj(subscript)p Ft(]=)p
+Fj(value)25 b Fu(syn)m(tax)31 b(in)m(tro)s(duced)e(ab)s(o)m(v)m(e.)275
+2765 y(When)h(assigning)h(to)h(an)e(indexed)g(arra)m(y)-8
+b(,)32 b(if)f Fr(name)36 b Fu(is)31 b(subscripted)e(b)m(y)i(a)g
+(negativ)m(e)i(n)m(um)m(b)s(er,)c(that)150 2874 y(n)m(um)m(b)s(er)43
+b(is)h(in)m(terpreted)h(as)f(relativ)m(e)j(to)e(one)f(greater)i(than)e
+(the)g(maxim)m(um)g(index)g(of)h Fr(name)p Fu(,)j(so)150
+2984 y(negativ)m(e)30 b(indices)d(coun)m(t)h(bac)m(k)g(from)f(the)g
+(end)g(of)g(the)h(arra)m(y)-8 b(,)29 b(and)e(an)g(index)g(of)g(-1)h
+(references)g(the)f(last)150 3093 y(elemen)m(t.)275 3221
+y(An)m(y)h(elemen)m(t)h(of)g(an)f(arra)m(y)g(ma)m(y)h(b)s(e)f
+(referenced)g(using)g Ft(${)p Fj(name)p Ft([)p Fj(subscript)p
+Ft(]})p Fu(.)35 b(The)27 b(braces)i(are)150 3331 y(required)f(to)j(a)m
+(v)m(oid)f(con\015icts)g(with)f(the)h(shell's)f(\014lename)h(expansion)
+f(op)s(erators.)41 b(If)28 b(the)i Fr(subscript)g Fu(is)150
+3440 y(`)p Ft(@)p Fu(')f(or)h(`)p Ft(*)p Fu(',)f(the)h(w)m(ord)f
+(expands)f(to)i(all)g(mem)m(b)s(ers)e(of)i(the)f(arra)m(y)h
+Fr(name)p Fu(.)40 b(These)29 b(subscripts)f(di\013er)h(only)150
+3550 y(when)36 b(the)g(w)m(ord)g(app)s(ears)g(within)g(double)g
+(quotes.)60 b(If)36 b(the)h(w)m(ord)f(is)g(double-quoted,)j
+Ft(${)p Fj(name)p Ft([*]})150 3660 y Fu(expands)25 b(to)h(a)g(single)h
+(w)m(ord)e(with)g(the)h(v)-5 b(alue)26 b(of)g(eac)m(h)h(arra)m(y)f(mem)
+m(b)s(er)f(separated)h(b)m(y)g(the)f(\014rst)g(c)m(harac-)150
+3769 y(ter)j(of)g(the)h Ft(IFS)e Fu(v)-5 b(ariable,)29
+b(and)f Ft(${)p Fj(name)p Ft([@]})d Fu(expands)i(eac)m(h)i(elemen)m(t)h
+(of)e Fr(name)33 b Fu(to)c(a)f(separate)h(w)m(ord.)150
+3879 y(When)j(there)h(are)f(no)g(arra)m(y)h(mem)m(b)s(ers,)f
+Ft(${)p Fj(name)p Ft([@]})e Fu(expands)h(to)i(nothing.)47
+b(If)31 b(the)i(double-quoted)150 3988 y(expansion)39
+b(o)s(ccurs)h(within)f(a)h(w)m(ord,)i(the)d(expansion)h(of)g(the)f
+(\014rst)g(parameter)h(is)g(joined)f(with)h(the)150 4098
+y(b)s(eginning)29 b(part)g(of)h(the)f(original)i(w)m(ord,)e(and)g(the)h
+(expansion)f(of)h(the)f(last)i(parameter)e(is)h(joined)f(with)150
+4208 y(the)g(last)h(part)f(of)g(the)g(original)h(w)m(ord.)40
+b(This)28 b(is)h(analogous)h(to)f(the)h(expansion)e(of)h(the)g(sp)s
+(ecial)h(param-)150 4317 y(eters)g(`)p Ft(@)p Fu(')f(and)g(`)p
+Ft(*)p Fu('.)41 b Ft(${#)p Fj(name)p Ft([)p Fj(subscript)p
+Ft(]})24 b Fu(expands)k(to)i(the)g(length)g(of)f Ft(${)p
+Fj(name)p Ft([)p Fj(subscript)p Ft(]})p Fu(.)35 b(If)150
+4427 y Fr(subscript)28 b Fu(is)g(`)p Ft(@)p Fu(')f(or)h(`)p
+Ft(*)p Fu(',)g(the)g(expansion)f(is)g(the)h(n)m(um)m(b)s(er)e(of)i
+(elemen)m(ts)g(in)f(the)h(arra)m(y)-8 b(.)41 b(If)27
+b(the)g Fr(subscript)150 4536 y Fu(used)34 b(to)h(reference)g(an)f
+(elemen)m(t)i(of)f(an)f(indexed)g(arra)m(y)h(ev)-5 b(aluates)36
+b(to)f(a)g(n)m(um)m(b)s(er)e(less)i(than)f(zero,)i(it)150
+4646 y(is)c(in)m(terpreted)h(as)f(relativ)m(e)i(to)f(one)f(greater)h
+(than)f(the)h(maxim)m(um)f(index)f(of)h(the)h(arra)m(y)-8
+b(,)33 b(so)g(negativ)m(e)150 4756 y(indices)d(coun)m(t)h(bac)m(k)h
+(from)e(the)g(end)g(of)g(the)h(arra)m(y)-8 b(,)31 b(and)f(an)g(index)g
+(of)h(-1)g(refers)f(to)h(the)g(last)g(elemen)m(t.)275
+4883 y(Referencing)41 b(an)f(arra)m(y)h(v)-5 b(ariable)42
+b(without)e(a)h(subscript)e(is)i(equiv)-5 b(alen)m(t)42
+b(to)f(referencing)g(with)g(a)150 4993 y(subscript)35
+b(of)h(0.)57 b(An)m(y)36 b(reference)g(to)h(a)f(v)-5
+b(ariable)36 b(using)g(a)g(v)-5 b(alid)36 b(subscript)f(is)h(legal,)j
+(and)c Ft(bash)g Fu(will)150 5103 y(create)d(an)e(arra)m(y)h(if)f
+(necessary)-8 b(.)275 5230 y(An)35 b(arra)m(y)i(v)-5
+b(ariable)37 b(is)g(considered)f(set)h(if)f(a)h(subscript)e(has)h(b)s
+(een)g(assigned)g(a)h(v)-5 b(alue.)59 b(The)36 b(n)m(ull)150
+5340 y(string)30 b(is)h(a)g(v)-5 b(alid)30 b(v)-5 b(alue.)p
+eop end
+%%Page: 97 103
+TeXDict begin 97 102 bop 150 -116 a Fu(Chapter)30 b(6:)41
+b(Bash)30 b(F)-8 b(eatures)2484 b(97)275 299 y(It)29
+b(is)h(p)s(ossible)f(to)h(obtain)g(the)f(k)m(eys)i(\(indices\))f(of)f
+(an)h(arra)m(y)g(as)f(w)m(ell)i(as)f(the)f(v)-5 b(alues.)41
+b($)p Fi({)p Fu(!)p Fr(name)5 b Fu([@])p Fi(})150 408
+y Fu(and)39 b($)p Fi({)p Fu(!)p Fr(name)5 b Fu([*])p
+Fi(})43 b Fu(expand)c(to)i(the)f(indices)h(assigned)f(in)g(arra)m(y)g
+(v)-5 b(ariable)41 b Fr(name)p Fu(.)70 b(The)39 b(treatmen)m(t)150
+518 y(when)i(in)g(double)g(quotes)h(is)f(similar)h(to)h(the)e
+(expansion)h(of)f(the)h(sp)s(ecial)g(parameters)g(`)p
+Ft(@)p Fu(')g(and)f(`)p Ft(*)p Fu(')150 628 y(within)30
+b(double)g(quotes.)275 759 y(The)25 b Ft(unset)g Fu(builtin)g(is)h
+(used)f(to)i(destro)m(y)f(arra)m(ys.)40 b Ft(unset)29
+b Fj(name)p Ft([)p Fj(subscript)p Ft(])22 b Fu(destro)m(ys)k(the)g
+(arra)m(y)150 868 y(elemen)m(t)40 b(at)e(index)g Fr(subscript)p
+Fu(.)62 b(Negativ)m(e)41 b(subscripts)c(to)i(indexed)e(arra)m(ys)i(are)
+f(in)m(terpreted)h(as)f(de-)150 978 y(scrib)s(ed)30 b(ab)s(o)m(v)m(e.)
+42 b(Unsetting)31 b(the)g(last)g(elemen)m(t)h(of)f(an)g(arra)m(y)g(v)-5
+b(ariable)31 b(do)s(es)f(not)h(unset)f(the)h(v)-5 b(ariable.)150
+1087 y Ft(unset)29 b Fj(name)p Fu(,)e(where)h Fr(name)33
+b Fu(is)28 b(an)g(arra)m(y)-8 b(,)30 b(remo)m(v)m(es)f(the)f(en)m(tire)
+h(arra)m(y)-8 b(.)41 b(A)28 b(subscript)f(of)h(`)p Ft(*)p
+Fu(')g(or)g(`)p Ft(@)p Fu(')g(also)150 1197 y(remo)m(v)m(es)k(the)e(en)
+m(tire)i(arra)m(y)-8 b(.)275 1328 y(When)35 b(using)g(a)i(v)-5
+b(ariable)36 b(name)g(with)g(a)g(subscript)e(as)i(an)g(argumen)m(t)g
+(to)h(a)f(command,)h(suc)m(h)f(as)150 1438 y(with)k Ft(unset)p
+Fu(,)h(without)e(using)h(the)g(w)m(ord)f(expansion)h(syn)m(tax)g
+(describ)s(ed)f(ab)s(o)m(v)m(e,)44 b(the)c(argumen)m(t)g(is)150
+1547 y(sub)5 b(ject)25 b(to)h(the)g(shell's)g(\014lename)f(expansion.)
+39 b(If)25 b(\014lename)h(expansion)f(is)g(not)h(desired,)g(the)f
+(argumen)m(t)150 1657 y(should)k(b)s(e)h(quoted.)275
+1788 y(The)20 b Ft(declare)p Fu(,)h Ft(local)p Fu(,)h(and)e
+Ft(readonly)f Fu(builtins)h(eac)m(h)i(accept)g(a)g Ft(-a)e
+Fu(option)h(to)h(sp)s(ecify)f(an)f(indexed)150 1897 y(arra)m(y)28
+b(and)f(a)h Ft(-A)e Fu(option)i(to)g(sp)s(ecify)f(an)h(asso)s(ciativ)m
+(e)i(arra)m(y)-8 b(.)40 b(If)27 b(b)s(oth)g(options)h(are)g(supplied,)f
+Ft(-A)f Fu(tak)m(es)150 2007 y(precedence.)55 b(The)35
+b Ft(read)f Fu(builtin)h(accepts)h(a)g Ft(-a)e Fu(option)i(to)g(assign)
+f(a)g(list)h(of)f(w)m(ords)g(read)g(from)g(the)150 2116
+y(standard)h(input)g(to)i(an)f(arra)m(y)-8 b(,)40 b(and)c(can)h(read)g
+(v)-5 b(alues)38 b(from)e(the)h(standard)g(input)f(in)m(to)i
+(individual)150 2226 y(arra)m(y)f(elemen)m(ts.)62 b(The)36
+b Ft(set)g Fu(and)h Ft(declare)d Fu(builtins)j(displa)m(y)g(arra)m(y)g
+(v)-5 b(alues)37 b(in)g(a)g(w)m(a)m(y)h(that)g(allo)m(ws)150
+2336 y(them)30 b(to)h(b)s(e)f(reused)g(as)g(input.)150
+2569 y Fs(6.8)68 b(The)45 b(Directory)g(Stac)l(k)150
+2729 y Fu(The)21 b(directory)h(stac)m(k)h(is)e(a)h(list)g(of)f(recen)m
+(tly-visited)j(directories.)39 b(The)20 b Ft(pushd)g
+Fu(builtin)h(adds)g(directories)150 2838 y(to)42 b(the)f(stac)m(k)i(as)
+e(it)h(c)m(hanges)g(the)f(curren)m(t)g(directory)-8 b(,)45
+b(and)40 b(the)i Ft(popd)e Fu(builtin)g(remo)m(v)m(es)j(sp)s(eci\014ed)
+150 2948 y(directories)29 b(from)f(the)h(stac)m(k)h(and)d(c)m(hanges)j
+(the)e(curren)m(t)g(directory)h(to)g(the)g(directory)f(remo)m(v)m(ed.)
+41 b(The)150 3058 y Ft(dirs)34 b Fu(builtin)g(displa)m(ys)h(the)g(con)m
+(ten)m(ts)i(of)e(the)g(directory)h(stac)m(k.)56 b(The)34
+b(curren)m(t)h(directory)g(is)g(alw)m(a)m(ys)150 3167
+y(the)c Ft(")p Fu(top)p Ft(")f Fu(of)g(the)h(directory)g(stac)m(k.)275
+3298 y(The)k(con)m(ten)m(ts)i(of)f(the)h(directory)f(stac)m(k)h(are)f
+(also)h(visible)g(as)f(the)g(v)-5 b(alue)36 b(of)g(the)g
+Ft(DIRSTACK)e Fu(shell)150 3408 y(v)-5 b(ariable.)150
+3600 y Fk(6.8.1)63 b(Directory)40 b(Stac)m(k)g(Builtins)150
+3768 y Ft(dirs)870 3899 y(dirs)47 b([-clpv])e([+)p Fj(N)i
+Ft(|)h(-)p Fj(N)p Ft(])630 4030 y Fu(Displa)m(y)35 b(the)f(list)g(of)g
+(curren)m(tly)g(remem)m(b)s(ered)f(directories.)51 b(Directories)36
+b(are)e(added)f(to)630 4140 y(the)28 b(list)h(with)f(the)g
+Ft(pushd)f Fu(command;)i(the)f Ft(popd)f Fu(command)h(remo)m(v)m(es)h
+(directories)g(from)630 4249 y(the)i(list.)41 b(The)30
+b(curren)m(t)g(directory)h(is)f(alw)m(a)m(ys)i(the)f(\014rst)e
+(directory)i(in)f(the)h(stac)m(k.)630 4402 y Ft(-c)384
+b Fu(Clears)31 b(the)f(directory)h(stac)m(k)h(b)m(y)e(deleting)h(all)h
+(of)e(the)h(elemen)m(ts.)630 4554 y Ft(-l)384 b Fu(Pro)s(duces)31
+b(a)h(listing)h(using)e(full)h(pathnames;)h(the)f(default)g(listing)h
+(format)1110 4664 y(uses)d(a)h(tilde)g(to)g(denote)g(the)f(home)h
+(directory)-8 b(.)630 4816 y Ft(-p)384 b Fu(Causes)30
+b Ft(dirs)f Fu(to)i(prin)m(t)f(the)h(directory)g(stac)m(k)h(with)e(one)
+g(en)m(try)h(p)s(er)e(line.)630 4968 y Ft(-v)384 b Fu(Causes)36
+b Ft(dirs)f Fu(to)i(prin)m(t)f(the)g(directory)h(stac)m(k)h(with)e(one)
+h(en)m(try)f(p)s(er)f(line,)1110 5078 y(pre\014xing)30
+b(eac)m(h)h(en)m(try)g(with)f(its)h(index)e(in)i(the)f(stac)m(k.)630
+5230 y Ft(+)p Fj(N)384 b Fu(Displa)m(ys)23 b(the)f Fr(N)10
+b Fu(th)21 b(directory)h(\(coun)m(ting)h(from)e(the)h(left)g(of)g(the)g
+(list)g(prin)m(ted)1110 5340 y(b)m(y)30 b Ft(dirs)f Fu(when)h(in)m(v)m
+(ok)m(ed)i(without)e(options\),)h(starting)g(with)g(zero.)p
+eop end
+%%Page: 98 104
+TeXDict begin 98 103 bop 150 -116 a Fu(Chapter)30 b(6:)41
+b(Bash)30 b(F)-8 b(eatures)2484 b(98)630 299 y Ft(-)p
+Fj(N)384 b Fu(Displa)m(ys)47 b(the)g Fr(N)10 b Fu(th)46
+b(directory)h(\(coun)m(ting)g(from)f(the)g(righ)m(t)h(of)g(the)f(list)
+1110 408 y(prin)m(ted)25 b(b)m(y)g Ft(dirs)g Fu(when)f(in)m(v)m(ok)m
+(ed)j(without)f(options\),)h(starting)g(with)e(zero.)150
+583 y Ft(popd)870 725 y(popd)47 b([-n])f([+)p Fj(N)h
+Ft(|)h(-)p Fj(N)p Ft(])630 867 y Fu(When)32 b(no)g(argumen)m(ts)h(are)g
+(giv)m(en,)h Ft(popd)d Fu(remo)m(v)m(es)j(the)f(top)f(directory)h(from)
+f(the)g(stac)m(k)630 977 y(and)f(p)s(erforms)e(a)j Ft(cd)f
+Fu(to)h(the)f(new)g(top)h(directory)-8 b(.)44 b(The)31
+b(elemen)m(ts)i(are)e(n)m(um)m(b)s(ered)f(from)630 1086
+y(0)j(starting)g(at)g(the)f(\014rst)g(directory)g(listed)h(with)f
+Ft(dirs)p Fu(;)g(that)h(is,)g Ft(popd)e Fu(is)i(equiv)-5
+b(alen)m(t)33 b(to)630 1196 y Ft(popd)c(+0)p Fu(.)630
+1370 y Ft(-n)384 b Fu(Suppresses)27 b(the)j(normal)g(c)m(hange)g(of)g
+(directory)g(when)e(remo)m(ving)j(directo-)1110 1480
+y(ries)f(from)g(the)h(stac)m(k,)h(so)f(that)g(only)f(the)h(stac)m(k)g
+(is)g(manipulated.)630 1655 y Ft(+)p Fj(N)384 b Fu(Remo)m(v)m(es)22
+b(the)f Fr(N)10 b Fu(th)20 b(directory)g(\(coun)m(ting)i(from)e(the)g
+(left)h(of)g(the)f(list)h(prin)m(ted)1110 1764 y(b)m(y)30
+b Ft(dirs)p Fu(\),)g(starting)h(with)f(zero.)630 1939
+y Ft(-)p Fj(N)384 b Fu(Remo)m(v)m(es)46 b(the)g Fr(N)10
+b Fu(th)44 b(directory)h(\(coun)m(ting)h(from)f(the)g(righ)m(t)g(of)g
+(the)g(list)1110 2048 y(prin)m(ted)30 b(b)m(y)g Ft(dirs)p
+Fu(\),)g(starting)h(with)f(zero.)150 2223 y Ft(pushd)870
+2365 y(pushd)46 b([-n])h([+)p Fj(N)g Ft(|)g Fj(-N)h Ft(|)f
+Fj(dir)p Ft(])630 2507 y Fu(Sa)m(v)m(e)30 b(the)e(curren)m(t)g
+(directory)h(on)f(the)h(top)f(of)h(the)f(directory)h(stac)m(k)h(and)e
+(then)g Ft(cd)f Fu(to)i Fr(dir)p Fu(.)630 2617 y(With)39
+b(no)f(argumen)m(ts,)j Ft(pushd)c Fu(exc)m(hanges)j(the)f(top)f(t)m(w)m
+(o)i(directories)g(and)d(mak)m(es)j(the)630 2726 y(new)30
+b(top)g(the)h(curren)m(t)f(directory)-8 b(.)630 2901
+y Ft(-n)384 b Fu(Suppresses)24 b(the)j(normal)f(c)m(hange)h(of)g
+(directory)f(when)g(rotating)h(or)f(adding)1110 3010
+y(directories)31 b(to)h(the)e(stac)m(k,)i(so)f(that)g(only)f(the)h
+(stac)m(k)h(is)e(manipulated.)630 3185 y Ft(+)p Fj(N)384
+b Fu(Brings)29 b(the)f Fr(N)10 b Fu(th)29 b(directory)g(\(coun)m(ting)h
+(from)e(the)g(left)i(of)e(the)h(list)g(prin)m(ted)1110
+3295 y(b)m(y)34 b Ft(dirs)p Fu(,)g(starting)h(with)f(zero\))i(to)f(the)
+f(top)g(of)h(the)f(list)h(b)m(y)f(rotating)i(the)1110
+3404 y(stac)m(k.)630 3579 y Ft(-)p Fj(N)384 b Fu(Brings)23
+b(the)g Fr(N)10 b Fu(th)23 b(directory)h(\(coun)m(ting)g(from)e(the)i
+(righ)m(t)f(of)g(the)h(list)f(prin)m(ted)1110 3688 y(b)m(y)34
+b Ft(dirs)p Fu(,)g(starting)h(with)f(zero\))i(to)f(the)f(top)g(of)h
+(the)f(list)h(b)m(y)f(rotating)i(the)1110 3798 y(stac)m(k.)630
+3972 y Fj(dir)336 b Fu(Mak)m(es)28 b Fr(dir)33 b Fu(b)s(e)27
+b(the)g(top)g(of)g(the)h(stac)m(k,)h(making)e(it)h(the)f(new)g(curren)m
+(t)g(direc-)1110 4082 y(tory)k(as)f(if)h(it)g(had)e(b)s(een)h(supplied)
+f(as)i(an)f(argumen)m(t)h(to)g(the)f Ft(cd)g Fu(builtin.)150
+4345 y Fs(6.9)68 b(Con)l(trolling)47 b(the)e(Prompt)150
+4505 y Fu(Bash)33 b(examines)h(the)f(v)-5 b(alue)33 b(of)h(the)f(arra)m
+(y)g(v)-5 b(ariable)34 b Ft(PROMPT_COMMANDS)29 b Fu(just)j(b)s(efore)h
+(prin)m(ting)g(eac)m(h)150 4614 y(primary)c(prompt.)40
+b(If)30 b(an)m(y)g(elemen)m(ts)i(in)e Ft(PROMPT_COMMANDS)c
+Fu(are)31 b(set)f(and)g(non-n)m(ull,)g(Bash)h(executes)150
+4724 y(eac)m(h)h(v)-5 b(alue,)31 b(in)f(n)m(umeric)g(order,)g(just)g
+(as)g(if)h(it)g(had)e(b)s(een)h(t)m(yp)s(ed)g(on)g(the)h(command)f
+(line.)275 4874 y(In)d(addition,)j(the)f(follo)m(wing)h(table)f
+(describ)s(es)f(the)h(sp)s(ecial)g(c)m(haracters)h(whic)m(h)f(can)f
+(app)s(ear)g(in)h(the)150 4983 y(prompt)g(v)-5 b(ariables)32
+b Ft(PS0)p Fu(,)d Ft(PS1)p Fu(,)h Ft(PS2)p Fu(,)g(and)f
+Ft(PS4)p Fu(:)150 5165 y Ft(\\a)384 b Fu(A)30 b(b)s(ell)h(c)m
+(haracter.)150 5340 y Ft(\\d)384 b Fu(The)30 b(date,)h(in)f
+Ft(")p Fu(W)-8 b(eekda)m(y)32 b(Mon)m(th)f(Date)p Ft(")h
+Fu(format)f(\(e.g.,)h Ft(")p Fu(T)-8 b(ue)30 b(Ma)m(y)h(26)p
+Ft(")p Fu(\).)p eop end
+%%Page: 99 105
+TeXDict begin 99 104 bop 150 -116 a Fu(Chapter)30 b(6:)41
+b(Bash)30 b(F)-8 b(eatures)2484 b(99)150 299 y Ft(\\D{)p
+Fj(format)p Ft(})630 408 y Fu(The)27 b Fr(format)i Fu(is)f(passed)e(to)
+i Ft(strftime)p Fu(\(3\))f(and)f(the)i(result)f(is)g(inserted)g(in)m
+(to)h(the)g(prompt)630 518 y(string;)42 b(an)d(empt)m(y)f
+Fr(format)j Fu(results)d(in)g(a)h(lo)s(cale-sp)s(eci\014c)h(time)f
+(represen)m(tation.)65 b(The)630 628 y(braces)31 b(are)f(required.)150
+790 y Ft(\\e)384 b Fu(An)30 b(escap)s(e)h(c)m(haracter.)150
+952 y Ft(\\h)384 b Fu(The)30 b(hostname,)h(up)e(to)i(the)g(\014rst)e
+(`.'.)150 1114 y Ft(\\H)384 b Fu(The)30 b(hostname.)150
+1276 y Ft(\\j)384 b Fu(The)30 b(n)m(um)m(b)s(er)f(of)h(jobs)g(curren)m
+(tly)h(managed)g(b)m(y)f(the)g(shell.)150 1438 y Ft(\\l)384
+b Fu(The)30 b(basename)h(of)f(the)h(shell's)f(terminal)h(device)g
+(name.)150 1600 y Ft(\\n)384 b Fu(A)30 b(newline.)150
+1763 y Ft(\\r)384 b Fu(A)30 b(carriage)i(return.)150
+1925 y Ft(\\s)384 b Fu(The)22 b(name)g(of)h(the)f(shell,)i(the)f
+(basename)f(of)h Ft($0)f Fu(\(the)g(p)s(ortion)g(follo)m(wing)i(the)f
+(\014nal)e(slash\).)150 2087 y Ft(\\t)384 b Fu(The)30
+b(time,)h(in)f(24-hour)h(HH:MM:SS)g(format.)150 2249
+y Ft(\\T)384 b Fu(The)30 b(time,)h(in)f(12-hour)h(HH:MM:SS)g(format.)
+150 2411 y Ft(\\@)384 b Fu(The)30 b(time,)h(in)f(12-hour)h(am/pm)f
+(format.)150 2573 y Ft(\\A)384 b Fu(The)30 b(time,)h(in)f(24-hour)h
+(HH:MM)g(format.)150 2735 y Ft(\\u)384 b Fu(The)30 b(username)g(of)g
+(the)h(curren)m(t)f(user.)150 2898 y Ft(\\v)384 b Fu(The)30
+b(v)m(ersion)h(of)f(Bash)h(\(e.g.,)h(2.00\))150 3060
+y Ft(\\V)384 b Fu(The)30 b(release)i(of)e(Bash,)h(v)m(ersion)g
+Ft(+)f Fu(patc)m(hlev)m(el)i(\(e.g.,)h(2.00.0\))150 3222
+y Ft(\\w)384 b Fu(The)34 b(curren)m(t)h(w)m(orking)g(directory)-8
+b(,)37 b(with)e Ft($HOME)e Fu(abbreviated)j(with)e(a)h(tilde)h(\(uses)f
+(the)630 3331 y Ft($PROMPT_DIRTRIM)26 b Fu(v)-5 b(ariable\).)150
+3494 y Ft(\\W)384 b Fu(The)30 b(basename)h(of)f Ft($PWD)p
+Fu(,)g(with)g Ft($HOME)f Fu(abbreviated)h(with)g(a)h(tilde.)150
+3656 y Ft(\\!)384 b Fu(The)30 b(history)g(n)m(um)m(b)s(er)f(of)i(this)f
+(command.)150 3818 y Ft(\\#)384 b Fu(The)30 b(command)g(n)m(um)m(b)s
+(er)f(of)i(this)f(command.)150 3980 y Ft(\\$)384 b Fu(If)30
+b(the)g(e\013ectiv)m(e)j(uid)d(is)g(0,)h Ft(#)p Fu(,)g(otherwise)g
+Ft($)p Fu(.)150 4142 y Ft(\\)p Fj(nnn)288 b Fu(The)30
+b(c)m(haracter)i(whose)e(ASCI)s(I)f(co)s(de)h(is)h(the)f(o)s(ctal)i(v)
+-5 b(alue)31 b Fr(nnn)p Fu(.)150 4304 y Ft(\\\\)384 b
+Fu(A)30 b(bac)m(kslash.)150 4466 y Ft(\\[)384 b Fu(Begin)38
+b(a)f(sequence)g(of)g(non-prin)m(ting)g(c)m(haracters.)61
+b(This)36 b(could)h(b)s(e)g(used)f(to)h(em)m(b)s(ed)g(a)630
+4576 y(terminal)31 b(con)m(trol)h(sequence)e(in)m(to)i(the)e(prompt.)
+150 4738 y Ft(\\])384 b Fu(End)29 b(a)i(sequence)g(of)f(non-prin)m
+(ting)g(c)m(haracters.)275 4902 y(The)25 b(command)h(n)m(um)m(b)s(er)f
+(and)h(the)g(history)g(n)m(um)m(b)s(er)f(are)i(usually)f(di\013eren)m
+(t:)39 b(the)26 b(history)g(n)m(um)m(b)s(er)150 5011
+y(of)h(a)f(command)h(is)f(its)h(p)s(osition)f(in)g(the)h(history)f
+(list,)i(whic)m(h)f(ma)m(y)g(include)f(commands)g(restored)g(from)150
+5121 y(the)39 b(history)h(\014le)f(\(see)h(Section)g(9.1)h([Bash)e
+(History)h(F)-8 b(acilities],)45 b(page)40 b(146\),)j(while)d(the)f
+(command)150 5230 y(n)m(um)m(b)s(er)j(is)h(the)h(p)s(osition)f(in)g
+(the)g(sequence)h(of)f(commands)g(executed)h(during)e(the)i(curren)m(t)
+f(shell)150 5340 y(session.)p eop end
+%%Page: 100 106
+TeXDict begin 100 105 bop 150 -116 a Fu(Chapter)30 b(6:)41
+b(Bash)30 b(F)-8 b(eatures)2439 b(100)275 299 y(After)28
+b(the)g(string)g(is)g(deco)s(ded,)g(it)g(is)g(expanded)f(via)i
+(parameter)f(expansion,)h(command)f(substitu-)150 408
+y(tion,)g(arithmetic)f(expansion,)g(and)e(quote)i(remo)m(v)-5
+b(al,)29 b(sub)5 b(ject)25 b(to)i(the)f(v)-5 b(alue)27
+b(of)f(the)g Ft(promptvars)e Fu(shell)150 518 y(option)i(\(see)h
+(Section)g(4.3.2)g([The)f(Shopt)f(Builtin],)j(page)e(66\).)41
+b(This)25 b(can)h(ha)m(v)m(e)h(un)m(w)m(an)m(ted)f(side)g(e\013ects)150
+628 y(if)i(escap)s(ed)f(p)s(ortions)g(of)h(the)g(string)f(app)s(ear)g
+(within)g(command)h(substitution)f(or)h(con)m(tain)g(c)m(haracters)150
+737 y(sp)s(ecial)j(to)g(w)m(ord)f(expansion.)150 1015
+y Fs(6.10)68 b(The)45 b(Restricted)h(Shell)150 1174 y
+Fu(If)34 b(Bash)g(is)g(started)g(with)g(the)g(name)h
+Ft(rbash)p Fu(,)e(or)h(the)h Ft(--restricted)30 b Fu(or)k
+Ft(-r)g Fu(option)g(is)g(supplied)f(at)150 1284 y(in)m(v)m(o)s(cation,)
+d(the)d(shell)g(b)s(ecomes)h(restricted.)40 b(A)27 b(restricted)h
+(shell)f(is)g(used)f(to)i(set)f(up)f(an)h(en)m(vironmen)m(t)150
+1393 y(more)g(con)m(trolled)i(than)e(the)g(standard)g(shell.)40
+b(A)27 b(restricted)h(shell)f(b)s(eha)m(v)m(es)h(iden)m(tically)h(to)f
+Ft(bash)e Fu(with)150 1503 y(the)31 b(exception)g(that)g(the)g(follo)m
+(wing)h(are)e(disallo)m(w)m(ed)i(or)e(not)h(p)s(erformed:)225
+1662 y Fq(\017)60 b Fu(Changing)30 b(directories)h(with)g(the)f
+Ft(cd)g Fu(builtin.)225 1809 y Fq(\017)60 b Fu(Setting)33
+b(or)g(unsetting)f(the)h(v)-5 b(alues)33 b(of)f(the)h
+Ft(SHELL)p Fu(,)f Ft(PATH)p Fu(,)g Ft(HISTFILE)p Fu(,)f
+Ft(ENV)p Fu(,)h(or)g Ft(BASH_ENV)e Fu(v)-5 b(ari-)330
+1919 y(ables.)225 2065 y Fq(\017)60 b Fu(Sp)s(ecifying)30
+b(command)g(names)g(con)m(taining)i(slashes.)225 2212
+y Fq(\017)60 b Fu(Sp)s(ecifying)30 b(a)h(\014lename)f(con)m(taining)i
+(a)f(slash)f(as)h(an)f(argumen)m(t)h(to)g(the)f Ft(.)h
+Fu(builtin)e(command.)225 2359 y Fq(\017)60 b Fu(Sp)s(ecifying)33
+b(a)i(\014lename)f(con)m(taining)h(a)g(slash)e(as)i(an)e(argumen)m(t)i
+(to)g(the)f Ft(history)e Fu(builtin)h(com-)330 2469 y(mand.)225
+2615 y Fq(\017)60 b Fu(Sp)s(ecifying)32 b(a)g(\014lename)h(con)m
+(taining)h(a)e(slash)g(as)h(an)f(argumen)m(t)h(to)g(the)f
+Ft(-p)g Fu(option)h(to)g(the)f Ft(hash)330 2725 y Fu(builtin)e
+(command.)225 2872 y Fq(\017)60 b Fu(Imp)s(orting)30
+b(function)g(de\014nitions)g(from)f(the)i(shell)g(en)m(vironmen)m(t)g
+(at)g(startup.)225 3018 y Fq(\017)60 b Fu(P)m(arsing)31
+b(the)f(v)-5 b(alue)31 b(of)g Ft(SHELLOPTS)d Fu(from)h(the)i(shell)g
+(en)m(vironmen)m(t)g(at)g(startup.)225 3165 y Fq(\017)60
+b Fu(Redirecting)31 b(output)f(using)g(the)h(`)p Ft(>)p
+Fu(',)g(`)p Ft(>|)p Fu(',)f(`)p Ft(<>)p Fu(',)h(`)p Ft(>&)p
+Fu(',)f(`)p Ft(&>)p Fu(',)h(and)e(`)p Ft(>>)p Fu(')i(redirection)g(op)s
+(erators.)225 3312 y Fq(\017)60 b Fu(Using)31 b(the)f
+Ft(exec)f Fu(builtin)h(to)h(replace)h(the)e(shell)h(with)f(another)h
+(command.)225 3459 y Fq(\017)60 b Fu(Adding)24 b(or)g(deleting)i
+(builtin)e(commands)g(with)h(the)f Ft(-f)g Fu(and)g Ft(-d)g
+Fu(options)h(to)h(the)e Ft(enable)f Fu(builtin.)225 3606
+y Fq(\017)60 b Fu(Using)31 b(the)f Ft(enable)f Fu(builtin)h(command)g
+(to)h(enable)g(disabled)f(shell)g(builtins.)225 3752
+y Fq(\017)60 b Fu(Sp)s(ecifying)30 b(the)g Ft(-p)g Fu(option)h(to)g
+(the)g Ft(command)d Fu(builtin.)225 3899 y Fq(\017)60
+b Fu(T)-8 b(urning)29 b(o\013)i(restricted)g(mo)s(de)f(with)g(`)p
+Ft(set)g(+r)p Fu(')g(or)g(`)p Ft(set)g(+o)g(restricted)p
+Fu('.)275 4096 y(These)g(restrictions)h(are)g(enforced)f(after)h(an)m
+(y)g(startup)f(\014les)g(are)h(read.)275 4255 y(When)j(a)i(command)e
+(that)i(is)f(found)f(to)h(b)s(e)g(a)g(shell)g(script)g(is)g(executed)h
+(\(see)g(Section)g(3.8)g([Shell)150 4364 y(Scripts],)25
+b(page)e(42\),)j Ft(rbash)c Fu(turns)g(o\013)i(an)m(y)f(restrictions)h
+(in)f(the)g(shell)h(spa)m(wned)e(to)i(execute)g(the)g(script.)275
+4523 y(The)42 b(restricted)h(shell)g(mo)s(de)f(is)g(only)h(one)g(comp)s
+(onen)m(t)f(of)h(a)g(useful)f(restricted)h(en)m(vironmen)m(t.)150
+4633 y(It)36 b(should)g(b)s(e)f(accompanied)j(b)m(y)e(setting)h
+Ft(PATH)e Fu(to)i(a)g(v)-5 b(alue)37 b(that)g(allo)m(ws)g(execution)h
+(of)e(only)h(a)f(few)150 4743 y(v)m(eri\014ed)26 b(commands)g
+(\(commands)g(that)h(allo)m(w)h(shell)f(escap)s(es)f(are)h
+(particularly)g(vulnerable\),)g(lea)m(ving)150 4852 y(the)i(user)f(in)h
+(a)g(non-writable)h(directory)f(other)g(than)g(his)g(home)g(directory)g
+(after)h(login,)g(not)f(allo)m(wing)150 4962 y(the)j(restricted)g
+(shell)g(to)g(execute)h(shell)e(scripts,)h(and)f(cleaning)i(the)e(en)m
+(vironmen)m(t)i(of)e(v)-5 b(ariables)32 b(that)150 5071
+y(cause)f(some)g(commands)f(to)h(mo)s(dify)e(their)i(b)s(eha)m(vior)f
+(\(e.g.,)j Ft(VISUAL)28 b Fu(or)j Ft(PAGER)p Fu(\).)275
+5230 y(Mo)s(dern)e(systems)g(pro)m(vide)h(more)g(secure)g(w)m(a)m(ys)g
+(to)h(implemen)m(t)f(a)g(restricted)h(en)m(vironmen)m(t,)f(suc)m(h)150
+5340 y(as)h Ft(jails)p Fu(,)e Ft(zones)p Fu(,)g(or)h
+Ft(containers)p Fu(.)p eop end
+%%Page: 101 107
+TeXDict begin 101 106 bop 150 -116 a Fu(Chapter)30 b(6:)41
+b(Bash)30 b(F)-8 b(eatures)2439 b(101)150 299 y Fs(6.11)68
+b(Bash)45 b(POSIX)f(Mo)t(de)150 458 y Fu(Starting)39
+b(Bash)f(with)g(the)h Ft(--posix)d Fu(command-line)j(option)g(or)f
+(executing)h(`)p Ft(set)30 b(-o)g(posix)p Fu(')37 b(while)150
+568 y(Bash)26 b(is)g(running)e(will)j(cause)f(Bash)g(to)h(conform)f
+(more)g(closely)h(to)g(the)f Fm(posix)f Fu(standard)g(b)m(y)h(c)m
+(hanging)150 677 y(the)31 b(b)s(eha)m(vior)f(to)h(matc)m(h)g(that)g(sp)
+s(eci\014ed)f(b)m(y)g Fm(posix)g Fu(in)g(areas)h(where)f(the)h(Bash)f
+(default)h(di\013ers.)275 810 y(When)f(in)m(v)m(ok)m(ed)h(as)g
+Ft(sh)p Fu(,)f(Bash)h(en)m(ters)g Fm(posix)e Fu(mo)s(de)h(after)h
+(reading)g(the)f(startup)g(\014les.)275 942 y(The)f(follo)m(wing)j
+(list)f(is)g(what's)f(c)m(hanged)h(when)e(`)p Fm(posix)h
+Fu(mo)s(de')h(is)f(in)g(e\013ect:)199 1074 y(1.)61 b(Bash)31
+b(ensures)e(that)i(the)f Ft(POSIXLY_CORRECT)d Fu(v)-5
+b(ariable)31 b(is)f(set.)199 1206 y(2.)61 b(When)28 b(a)i(command)e(in)
+g(the)h(hash)f(table)i(no)e(longer)h(exists,)h(Bash)f(will)g(re-searc)m
+(h)h Ft($PATH)d Fu(to)i(\014nd)330 1316 y(the)i(new)e(lo)s(cation.)43
+b(This)29 b(is)i(also)g(a)m(v)-5 b(ailable)33 b(with)d(`)p
+Ft(shopt)f(-s)h(checkhash)p Fu('.)199 1448 y(3.)61 b(Bash)36
+b(will)g(not)g(insert)g(a)g(command)f(without)h(the)g(execute)h(bit)f
+(set)g(in)m(to)h(the)f(command)g(hash)330 1558 y(table,)c(ev)m(en)f(if)
+f(it)h(returns)e(it)i(as)g(a)f(\(last-ditc)m(h\))j(result)d(from)g(a)h
+Ft($PATH)e Fu(searc)m(h.)199 1690 y(4.)61 b(The)42 b(message)h(prin)m
+(ted)e(b)m(y)h(the)g(job)g(con)m(trol)i(co)s(de)e(and)f(builtins)h
+(when)f(a)h(job)g(exits)h(with)f(a)330 1800 y(non-zero)31
+b(status)g(is)f(`Done\(status\)'.)199 1932 y(5.)61 b(The)40
+b(message)h(prin)m(ted)f(b)m(y)g(the)h(job)f(con)m(trol)h(co)s(de)g
+(and)f(builtins)f(when)h(a)g(job)g(is)h(stopp)s(ed)e(is)330
+2041 y(`Stopp)s(ed\()p Fr(signame)5 b Fu(\)',)31 b(where)f
+Fr(signame)36 b Fu(is,)31 b(for)f(example,)h Ft(SIGTSTP)p
+Fu(.)199 2174 y(6.)61 b(Alias)31 b(expansion)g(is)f(alw)m(a)m(ys)i
+(enabled,)e(ev)m(en)i(in)e(non-in)m(teractiv)m(e)j(shells.)199
+2306 y(7.)61 b(Reserv)m(ed)40 b(w)m(ords)g(app)s(earing)f(in)h(a)g(con)
+m(text)i(where)d(reserv)m(ed)h(w)m(ords)f(are)i(recognized)g(do)f(not)
+330 2415 y(undergo)30 b(alias)h(expansion.)199 2548 y(8.)61
+b(The)38 b Fm(posix)h Ft(PS1)f Fu(and)g Ft(PS2)g Fu(expansions)g(of)i
+(`)p Ft(!)p Fu(')f(to)g(the)g(history)g(n)m(um)m(b)s(er)f(and)g(`)p
+Ft(!!)p Fu(')h(to)g(`)p Ft(!)p Fu(')h(are)330 2657 y(enabled,)26
+b(and)f(parameter)g(expansion)g(is)g(p)s(erformed)e(on)i(the)g(v)-5
+b(alues)25 b(of)g Ft(PS1)f Fu(and)h Ft(PS2)f Fu(regardless)330
+2767 y(of)31 b(the)f(setting)i(of)e(the)h Ft(promptvars)c
+Fu(option.)199 2899 y(9.)61 b(The)30 b Fm(posix)g Fu(startup)f(\014les)
+i(are)g(executed)g(\()p Ft($ENV)p Fu(\))f(rather)g(than)g(the)h(normal)
+f(Bash)g(\014les.)154 3031 y(10.)61 b(Tilde)30 b(expansion)g(is)f(only)
+h(p)s(erformed)f(on)h(assignmen)m(ts)g(preceding)g(a)g(command)g(name,)
+g(rather)330 3141 y(than)g(on)g(all)i(assignmen)m(t)f(statemen)m(ts)h
+(on)e(the)h(line.)154 3273 y(11.)61 b(The)30 b(default)g(history)h
+(\014le)f(is)h Ft(~/.sh_history)26 b Fu(\(this)31 b(is)f(the)h(default)
+g(v)-5 b(alue)30 b(of)h Ft($HISTFILE)p Fu(\).)154 3405
+y(12.)61 b(Redirection)25 b(op)s(erators)f(do)g(not)g(p)s(erform)f
+(\014lename)h(expansion)g(on)g(the)g(w)m(ord)f(in)h(the)g(redirection)
+330 3515 y(unless)30 b(the)g(shell)h(is)f(in)m(teractiv)m(e.)154
+3647 y(13.)61 b(Redirection)31 b(op)s(erators)g(do)f(not)h(p)s(erform)e
+(w)m(ord)h(splitting)h(on)f(the)h(w)m(ord)f(in)g(the)g(redirection.)154
+3779 y(14.)61 b(F)-8 b(unction)35 b(names)g(m)m(ust)f(b)s(e)g(v)-5
+b(alid)35 b(shell)f Ft(name)p Fu(s.)52 b(That)34 b(is,)i(they)f(ma)m(y)
+g(not)g(con)m(tain)g(c)m(haracters)330 3889 y(other)e(than)g(letters,)h
+(digits,)h(and)d(underscores,)h(and)f(ma)m(y)h(not)g(start)h(with)e(a)h
+(digit.)49 b(Declaring)330 3999 y(a)31 b(function)f(with)g(an)g(in)m(v)
+-5 b(alid)31 b(name)g(causes)f(a)h(fatal)h(syn)m(tax)f(error)f(in)g
+(non-in)m(teractiv)m(e)j(shells.)154 4131 y(15.)61 b(F)-8
+b(unction)31 b(names)f(ma)m(y)h(not)g(b)s(e)f(the)g(same)h(as)g(one)f
+(of)h(the)f Fm(posix)g Fu(sp)s(ecial)h(builtins.)154
+4263 y(16.)61 b Fm(posix)30 b Fu(sp)s(ecial)h(builtins)e(are)i(found)e
+(b)s(efore)h(shell)h(functions)f(during)f(command)h(lo)s(okup.)154
+4395 y(17.)61 b(When)48 b(prin)m(ting)g(shell)h(function)f
+(de\014nitions)g(\(e.g.,)55 b(b)m(y)48 b Ft(type)p Fu(\),)k(Bash)d(do)s
+(es)f(not)h(prin)m(t)f(the)330 4505 y Ft(function)28
+b Fu(k)m(eyw)m(ord.)154 4637 y(18.)61 b(Literal)28 b(tildes)g(that)f
+(app)s(ear)f(as)i(the)f(\014rst)f(c)m(haracter)j(in)d(elemen)m(ts)j(of)
+e(the)g Ft(PATH)f Fu(v)-5 b(ariable)27 b(are)h(not)330
+4747 y(expanded)i(as)g(describ)s(ed)f(ab)s(o)m(v)m(e)j(under)d(Section)
+i(3.5.2)h([Tilde)f(Expansion],)f(page)h(24.)154 4879
+y(19.)61 b(The)29 b Ft(time)g Fu(reserv)m(ed)h(w)m(ord)g(ma)m(y)g(b)s
+(e)g(used)f(b)m(y)h(itself)g(as)g(a)h(command.)40 b(When)30
+b(used)f(in)g(this)h(w)m(a)m(y)-8 b(,)330 4989 y(it)33
+b(displa)m(ys)g(timing)g(statistics)h(for)e(the)h(shell)g(and)f(its)g
+(completed)i(c)m(hildren.)47 b(The)32 b Ft(TIMEFORMAT)330
+5098 y Fu(v)-5 b(ariable)31 b(con)m(trols)h(the)e(format)h(of)g(the)f
+(timing)h(information.)154 5230 y(20.)61 b(When)33 b(parsing)g(and)f
+(expanding)h(a)h($)p Fi({)6 b Fu(.)22 b(.)h(.)11 b Fi(})33
+b Fu(expansion)g(that)h(app)s(ears)f(within)f(double)h(quotes,)330
+5340 y(single)42 b(quotes)g(are)g(no)g(longer)g(sp)s(ecial)g(and)f
+(cannot)i(b)s(e)e(used)g(to)h(quote)g(a)g(closing)h(brace)f(or)p
+eop end
+%%Page: 102 108
+TeXDict begin 102 107 bop 150 -116 a Fu(Chapter)30 b(6:)41
+b(Bash)30 b(F)-8 b(eatures)2439 b(102)330 299 y(other)31
+b(sp)s(ecial)h(c)m(haracter,)i(unless)c(the)i(op)s(erator)f(is)g(one)h
+(of)f(those)h(de\014ned)e(to)i(p)s(erform)e(pattern)330
+408 y(remo)m(v)-5 b(al.)42 b(In)30 b(this)g(case,)i(they)e(do)g(not)h
+(ha)m(v)m(e)h(to)f(app)s(ear)e(as)i(matc)m(hed)g(pairs.)154
+547 y(21.)61 b(The)29 b(parser)g(do)s(es)g(not)h(recognize)h
+Ft(time)d Fu(as)i(a)g(reserv)m(ed)f(w)m(ord)g(if)h(the)f(next)h(tok)m
+(en)h(b)s(egins)d(with)i(a)330 656 y(`)p Ft(-)p Fu('.)154
+795 y(22.)61 b(The)30 b(`)p Ft(!)p Fu(')h(c)m(haracter)h(do)s(es)e(not)
+h(in)m(tro)s(duce)g(history)f(expansion)h(within)f(a)h(double-quoted)g
+(string,)330 905 y(ev)m(en)g(if)f(the)h Ft(histexpand)d
+Fu(option)i(is)h(enabled.)154 1043 y(23.)61 b(If)24 b(a)g
+Fm(posix)g Fu(sp)s(ecial)h(builtin)f(returns)f(an)h(error)g(status,)i
+(a)e(non-in)m(teractiv)m(e)j(shell)e(exits.)39 b(The)24
+b(fatal)330 1153 y(errors)30 b(are)h(those)f(listed)h(in)f(the)h
+Fm(posix)e Fu(standard,)h(and)g(include)g(things)g(lik)m(e)i(passing)e
+(incorrect)330 1262 y(options,)43 b(redirection)d(errors,)i(v)-5
+b(ariable)41 b(assignmen)m(t)g(errors)e(for)g(assignmen)m(ts)i
+(preceding)f(the)330 1372 y(command)30 b(name,)h(and)f(so)g(on.)154
+1510 y(24.)61 b(A)31 b(non-in)m(teractiv)m(e)j(shell)d(exits)h(with)e
+(an)h(error)g(status)g(if)g(a)g(v)-5 b(ariable)32 b(assignmen)m(t)g
+(error)e(o)s(ccurs)330 1620 y(when)38 b(no)h(command)g(name)g(follo)m
+(ws)i(the)e(assignmen)m(t)h(statemen)m(ts.)69 b(A)39
+b(v)-5 b(ariable)40 b(assignmen)m(t)330 1729 y(error)30
+b(o)s(ccurs,)g(for)g(example,)i(when)d(trying)i(to)g(assign)f(a)h(v)-5
+b(alue)31 b(to)g(a)g(readonly)f(v)-5 b(ariable.)154 1868
+y(25.)61 b(A)31 b(non-in)m(teractiv)m(e)j(shell)d(exits)h(with)e(an)h
+(error)g(status)g(if)g(a)g(v)-5 b(ariable)32 b(assignmen)m(t)g(error)e
+(o)s(ccurs)330 1977 y(in)g(an)g(assignmen)m(t)i(statemen)m(t)g
+(preceding)e(a)h(sp)s(ecial)g(builtin,)f(but)g(not)g(with)h(an)m(y)f
+(other)h(simple)330 2087 y(command.)154 2225 y(26.)61
+b(A)43 b(non-in)m(teractiv)m(e)i(shell)e(exits)h(with)f(an)f(error)h
+(status)g(if)g(the)g(iteration)h(v)-5 b(ariable)44 b(in)f(a)g
+Ft(for)330 2335 y Fu(statemen)m(t)32 b(or)f(the)f(selection)i(v)-5
+b(ariable)32 b(in)e(a)g Ft(select)f Fu(statemen)m(t)j(is)f(a)f
+(readonly)h(v)-5 b(ariable.)154 2473 y(27.)61 b(Non-in)m(teractiv)m(e)
+34 b(shells)c(exit)h(if)g Fr(\014lename)k Fu(in)30 b
+Ft(.)g Fr(\014lename)36 b Fu(is)31 b(not)f(found.)154
+2612 y(28.)61 b(Non-in)m(teractiv)m(e)41 b(shells)d(exit)h(if)f(a)g
+(syn)m(tax)g(error)g(in)f(an)h(arithmetic)h(expansion)f(results)f(in)h
+(an)330 2721 y(in)m(v)-5 b(alid)31 b(expression.)154
+2860 y(29.)61 b(Non-in)m(teractiv)m(e)34 b(shells)c(exit)h(if)g(a)f
+(parameter)h(expansion)g(error)f(o)s(ccurs.)154 2998
+y(30.)61 b(Non-in)m(teractiv)m(e)27 b(shells)c(exit)i(if)e(there)h(is)f
+(a)h(syn)m(tax)g(error)f(in)g(a)h(script)f(read)g(with)h(the)f
+Ft(.)g Fu(or)h Ft(source)330 3108 y Fu(builtins,)30 b(or)g(in)g(a)h
+(string)g(pro)s(cessed)e(b)m(y)i(the)f Ft(eval)f Fu(builtin.)154
+3246 y(31.)61 b(While)32 b(v)-5 b(ariable)32 b(indirection)f(is)g(a)m
+(v)-5 b(ailable,)34 b(it)d(ma)m(y)h(not)f(b)s(e)g(applied)g(to)g(the)h
+(`)p Ft(#)p Fu(')f(and)f(`)p Ft(?)p Fu(')h(sp)s(ecial)330
+3356 y(parameters.)154 3494 y(32.)61 b(When)28 b(expanding)g(the)g(`)p
+Ft(*)p Fu(')g(sp)s(ecial)h(parameter)f(in)g(a)h(pattern)f(con)m(text)i
+(where)e(the)g(expansion)g(is)330 3604 y(double-quoted)i(do)s(es)g(not)
+h(treat)h(the)e Ft($*)g Fu(as)h(if)f(it)h(w)m(ere)g(double-quoted.)154
+3742 y(33.)61 b(Assignmen)m(t)23 b(statemen)m(ts)h(preceding)e
+Fm(posix)f Fu(sp)s(ecial)i(builtins)f(p)s(ersist)g(in)f(the)i(shell)f
+(en)m(vironmen)m(t)330 3852 y(after)31 b(the)f(builtin)g(completes.)154
+3990 y(34.)61 b(The)31 b Ft(command)e Fu(builtin)i(do)s(es)g(not)h
+(prev)m(en)m(t)f(builtins)g(that)h(tak)m(e)h(assignmen)m(t)f(statemen)m
+(ts)h(as)f(ar-)330 4100 y(gumen)m(ts)40 b(from)e(expanding)h(them)g(as)
+h(assignmen)m(t)g(statemen)m(ts;)46 b(when)38 b(not)i(in)f
+Fm(posix)f Fu(mo)s(de,)330 4209 y(assignmen)m(t)k(builtins)e(lose)h
+(their)g(assignmen)m(t)h(statemen)m(t)h(expansion)d(prop)s(erties)g
+(when)g(pre-)330 4319 y(ceded)31 b(b)m(y)f Ft(command)p
+Fu(.)154 4457 y(35.)61 b(The)27 b Ft(bg)g Fu(builtin)g(uses)g(the)h
+(required)f(format)h(to)g(describ)s(e)f(eac)m(h)i(job)e(placed)h(in)f
+(the)h(bac)m(kground,)330 4567 y(whic)m(h)h(do)s(es)g(not)g(include)g
+(an)g(indication)h(of)f(whether)f(the)h(job)g(is)g(the)h(curren)m(t)e
+(or)h(previous)g(job.)154 4706 y(36.)61 b(The)23 b(output)f(of)i(`)p
+Ft(kill)29 b(-l)p Fu(')23 b(prin)m(ts)f(all)i(the)g(signal)f(names)g
+(on)g(a)h(single)g(line,)h(separated)e(b)m(y)g(spaces,)330
+4815 y(without)30 b(the)h(`)p Ft(SIG)p Fu(')f(pre\014x.)154
+4954 y(37.)61 b(The)30 b Ft(kill)f Fu(builtin)h(do)s(es)g(not)h(accept)
+h(signal)f(names)f(with)g(a)h(`)p Ft(SIG)p Fu(')f(pre\014x.)154
+5092 y(38.)61 b(The)38 b Ft(export)f Fu(and)g Ft(readonly)f
+Fu(builtin)i(commands)g(displa)m(y)h(their)f(output)g(in)g(the)h
+(format)g(re-)330 5202 y(quired)30 b(b)m(y)g Fm(posix)p
+Fu(.)154 5340 y(39.)61 b(The)30 b Ft(trap)f Fu(builtin)h(displa)m(ys)g
+(signal)i(names)e(without)g(the)h(leading)g Ft(SIG)p
+Fu(.)p eop end
+%%Page: 103 109
+TeXDict begin 103 108 bop 150 -116 a Fu(Chapter)30 b(6:)41
+b(Bash)30 b(F)-8 b(eatures)2439 b(103)154 299 y(40.)61
+b(The)39 b Ft(trap)e Fu(builtin)i(do)s(esn't)g(c)m(hec)m(k)h(the)g
+(\014rst)e(argumen)m(t)i(for)e(a)i(p)s(ossible)e(signal)i(sp)s
+(eci\014cation)330 408 y(and)30 b(rev)m(ert)i(the)e(signal)i(handling)e
+(to)h(the)g(original)h(disp)s(osition)e(if)h(it)g(is,)g(unless)f(that)h
+(argumen)m(t)330 518 y(consists)e(solely)g(of)g(digits)g(and)f(is)g(a)h
+(v)-5 b(alid)29 b(signal)g(n)m(um)m(b)s(er.)38 b(If)28
+b(users)g(w)m(an)m(t)h(to)g(reset)g(the)g(handler)330
+628 y(for)h(a)g(giv)m(en)h(signal)g(to)f(the)h(original)g(disp)s
+(osition,)f(they)g(should)f(use)h(`)p Ft(-)p Fu(')g(as)g(the)g(\014rst)
+f(argumen)m(t.)154 765 y(41.)61 b Ft(trap)29 b(-p)35
+b Fu(displa)m(ys)h(signals)h(whose)f(disp)s(ositions)f(are)h(set)h(to)f
+(SIG)p 2687 765 28 4 v 40 w(DFL)g(and)g(those)g(that)g(w)m(ere)330
+874 y(ignored)30 b(when)g(the)g(shell)h(started.)154
+1011 y(42.)61 b(The)21 b Ft(.)h Fu(and)f Ft(source)f
+Fu(builtins)h(do)g(not)h(searc)m(h)h(the)f(curren)m(t)f(directory)h
+(for)g(the)g(\014lename)f(argumen)m(t)330 1121 y(if)30
+b(it)h(is)g(not)f(found)f(b)m(y)i(searc)m(hing)g Ft(PATH)p
+Fu(.)154 1258 y(43.)61 b(Enabling)21 b Fm(posix)g Fu(mo)s(de)g(has)g
+(the)g(e\013ect)i(of)e(setting)i(the)e Ft(inherit_errexit)d
+Fu(option,)23 b(so)f(subshells)330 1367 y(spa)m(wned)27
+b(to)i(execute)g(command)e(substitutions)h(inherit)f(the)h(v)-5
+b(alue)28 b(of)g(the)g Ft(-e)f Fu(option)h(from)g(the)330
+1477 y(paren)m(t)37 b(shell.)62 b(When)37 b(the)g Ft(inherit_errexit)c
+Fu(option)38 b(is)f(not)h(enabled,)h(Bash)e(clears)h(the)g
+Ft(-e)330 1587 y Fu(option)31 b(in)f(suc)m(h)g(subshells.)154
+1724 y(44.)61 b(Enabling)32 b Fm(posix)f Fu(mo)s(de)h(has)g(the)h
+(e\013ect)g(of)g(setting)g(the)g Ft(shift_verbose)28
+b Fu(option,)34 b(so)e(n)m(umeric)330 1833 y(argumen)m(ts)f(to)g
+Ft(shift)f Fu(that)h(exceed)h(the)e(n)m(um)m(b)s(er)g(of)h(p)s
+(ositional)g(parameters)g(will)g(result)g(in)f(an)330
+1943 y(error)g(message.)154 2080 y(45.)61 b(When)43 b(the)g
+Ft(alias)f Fu(builtin)g(displa)m(ys)i(alias)g(de\014nitions,)i(it)d(do)
+s(es)g(not)g(displa)m(y)h(them)f(with)g(a)330 2189 y(leading)31
+b(`)p Ft(alias)e Fu(')i(unless)f(the)g Ft(-p)g Fu(option)h(is)f
+(supplied.)154 2326 y(46.)61 b(When)40 b(the)g Ft(set)f
+Fu(builtin)h(is)g(in)m(v)m(ok)m(ed)h(without)f(options,)j(it)e(do)s(es)
+f(not)g(displa)m(y)g(shell)g(function)330 2436 y(names)30
+b(and)g(de\014nitions.)154 2573 y(47.)61 b(When)36 b(the)g
+Ft(set)g Fu(builtin)g(is)g(in)m(v)m(ok)m(ed)i(without)e(options,)i(it)f
+(displa)m(ys)f(v)-5 b(ariable)37 b(v)-5 b(alues)37 b(without)330
+2682 y(quotes,)26 b(unless)d(they)i(con)m(tain)g(shell)f(metac)m
+(haracters,)k(ev)m(en)d(if)f(the)g(result)g(con)m(tains)i(nonprin)m
+(ting)330 2792 y(c)m(haracters.)154 2929 y(48.)61 b(When)35
+b(the)g Ft(cd)f Fu(builtin)h(is)g(in)m(v)m(ok)m(ed)i(in)d
+Fr(logical)41 b Fu(mo)s(de,)36 b(and)f(the)g(pathname)g(constructed)g
+(from)330 3039 y Ft($PWD)i Fu(and)h(the)h(directory)f(name)h(supplied)e
+(as)i(an)f(argumen)m(t)h(do)s(es)f(not)g(refer)h(to)g(an)f(existing)330
+3148 y(directory)-8 b(,)32 b Ft(cd)d Fu(will)i(fail)g(instead)g(of)f
+(falling)h(bac)m(k)h(to)f Fr(ph)m(ysical)j Fu(mo)s(de.)154
+3285 y(49.)61 b(When)37 b(the)h Ft(cd)f Fu(builtin)g(cannot)h(c)m
+(hange)h(a)f(directory)g(b)s(ecause)g(the)g(length)g(of)f(the)h
+(pathname)330 3395 y(constructed)52 b(from)f Ft($PWD)f
+Fu(and)g(the)i(directory)g(name)f(supplied)f(as)i(an)f(argumen)m(t)h
+(exceeds)330 3504 y Fr(P)-8 b(A)g(TH)p 584 3504 V 41
+w(MAX)42 b Fu(when)31 b(all)j(sym)m(b)s(olic)e(links)h(are)f(expanded,)
+h Ft(cd)f Fu(will)g(fail)h(instead)g(of)g(attempting)330
+3614 y(to)e(use)f(only)h(the)f(supplied)f(directory)i(name.)154
+3751 y(50.)61 b(The)36 b Ft(pwd)f Fu(builtin)h(v)m(eri\014es)h(that)g
+(the)f(v)-5 b(alue)37 b(it)g(prin)m(ts)e(is)i(the)f(same)h(as)f(the)h
+(curren)m(t)f(directory)-8 b(,)330 3861 y(ev)m(en)31
+b(if)f(it)h(is)g(not)f(ask)m(ed)h(to)g(c)m(hec)m(k)h(the)f(\014le)f
+(system)h(with)f(the)h Ft(-P)e Fu(option.)154 3998 y(51.)61
+b(When)35 b(listing)g(the)g(history)-8 b(,)36 b(the)f
+Ft(fc)g Fu(builtin)f(do)s(es)g(not)h(include)g(an)f(indication)i(of)f
+(whether)f(or)330 4107 y(not)d(a)f(history)h(en)m(try)f(has)g(b)s(een)g
+(mo)s(di\014ed.)154 4244 y(52.)61 b(The)30 b(default)g(editor)h(used)f
+(b)m(y)g Ft(fc)g Fu(is)g Ft(ed)p Fu(.)154 4381 y(53.)61
+b(The)37 b Ft(type)g Fu(and)g Ft(command)f Fu(builtins)i(will)g(not)g
+(rep)s(ort)f(a)i(non-executable)g(\014le)f(as)g(ha)m(ving)h(b)s(een)330
+4491 y(found,)26 b(though)h(the)g(shell)g(will)g(attempt)h(to)g
+(execute)g(suc)m(h)f(a)g(\014le)g(if)g(it)g(is)g(the)g(only)g(so-named)
+g(\014le)330 4600 y(found)i(in)h Ft($PATH)p Fu(.)154
+4737 y(54.)61 b(The)33 b Ft(vi)f Fu(editing)i(mo)s(de)f(will)g(in)m(v)m
+(ok)m(e)i(the)e Ft(vi)g Fu(editor)h(directly)f(when)f(the)i(`)p
+Ft(v)p Fu(')f(command)g(is)g(run,)330 4847 y(instead)e(of)f(c)m(hec)m
+(king)i Ft($VISUAL)d Fu(and)g Ft($EDITOR)p Fu(.)154 4984
+y(55.)61 b(When)41 b(the)g Ft(xpg_echo)e Fu(option)i(is)g(enabled,)j
+(Bash)d(do)s(es)g(not)g(attempt)h(to)g(in)m(terpret)f(an)m(y)h(ar-)330
+5093 y(gumen)m(ts)35 b(to)g Ft(echo)e Fu(as)i(options.)54
+b(Eac)m(h)35 b(argumen)m(t)g(is)f(displa)m(y)m(ed,)j(after)e(escap)s(e)
+g(c)m(haracters)h(are)330 5203 y(con)m(v)m(erted.)154
+5340 y(56.)61 b(The)30 b Ft(ulimit)f Fu(builtin)g(uses)h(a)h(blo)s(c)m
+(k)g(size)g(of)g(512)g(b)m(ytes)g(for)f(the)h Ft(-c)f
+Fu(and)g Ft(-f)f Fu(options.)p eop end
+%%Page: 104 110
+TeXDict begin 104 109 bop 150 -116 a Fu(Chapter)30 b(6:)41
+b(Bash)30 b(F)-8 b(eatures)2439 b(104)154 299 y(57.)61
+b(The)39 b(arriv)-5 b(al)41 b(of)f Ft(SIGCHLD)e Fu(when)h(a)h(trap)g
+(is)g(set)h(on)f Ft(SIGCHLD)e Fu(do)s(es)h(not)h(in)m(terrupt)g(the)g
+Ft(wait)330 408 y Fu(builtin)c(and)h(cause)g(it)h(to)f(return)f
+(immediately)-8 b(.)62 b(The)37 b(trap)f(command)h(is)g(run)e(once)j
+(for)f(eac)m(h)330 518 y(c)m(hild)31 b(that)g(exits.)154
+654 y(58.)61 b(The)27 b Ft(read)f Fu(builtin)g(ma)m(y)i(b)s(e)e(in)m
+(terrupted)h(b)m(y)g(a)h(signal)f(for)g(whic)m(h)g(a)h(trap)f(has)g(b)s
+(een)f(set.)40 b(If)27 b(Bash)330 764 y(receiv)m(es)41
+b(a)f(trapp)s(ed)e(signal)i(while)f(executing)h Ft(read)p
+Fu(,)h(the)e(trap)h(handler)e(executes)i(and)f Ft(read)330
+874 y Fu(returns)29 b(an)h(exit)i(status)e(greater)i(than)e(128.)154
+1010 y(59.)61 b(Bash)27 b(remo)m(v)m(es)h(an)e(exited)i(bac)m(kground)e
+(pro)s(cess's)h(status)g(from)f(the)h(list)g(of)g(suc)m(h)f(statuses)h
+(after)330 1119 y(the)k Ft(wait)e Fu(builtin)h(is)g(used)g(to)h(obtain)
+g(it.)275 1284 y(There)j(is)g(other)h Fm(posix)f Fu(b)s(eha)m(vior)h
+(that)g(Bash)g(do)s(es)f(not)h(implemen)m(t)g(b)m(y)g(default)f(ev)m
+(en)i(when)d(in)150 1394 y Fm(posix)d Fu(mo)s(de.)40
+b(Sp)s(eci\014cally:)199 1532 y(1.)61 b(The)30 b Ft(fc)f
+Fu(builtin)h(c)m(hec)m(ks)i Ft($EDITOR)c Fu(as)j(a)f(program)g(to)h
+(edit)g(history)f(en)m(tries)h(if)f Ft(FCEDIT)f Fu(is)h(unset,)330
+1641 y(rather)g(than)g(defaulting)h(directly)g(to)g Ft(ed)p
+Fu(.)40 b Ft(fc)30 b Fu(uses)g Ft(ed)g Fu(if)g Ft(EDITOR)f
+Fu(is)h(unset.)199 1778 y(2.)61 b(As)29 b(noted)g(ab)s(o)m(v)m(e,)i
+(Bash)e(requires)g(the)g Ft(xpg_echo)e Fu(option)j(to)g(b)s(e)e
+(enabled)h(for)g(the)g Ft(echo)f Fu(builtin)330 1887
+y(to)j(b)s(e)f(fully)g(conforman)m(t.)275 2052 y(Bash)c(can)g(b)s(e)f
+(con\014gured)h(to)g(b)s(e)g Fm(posix)p Fu(-conforman)m(t)g(b)m(y)g
+(default,)h(b)m(y)f(sp)s(ecifying)g(the)g Ft(--enable-)150
+2162 y(strict-posix-default)c Fu(to)27 b Ft(configure)e
+Fu(when)h(building)h(\(see)h(Section)g(10.8)g([Optional)g(F)-8
+b(eatures],)150 2271 y(page)31 b(155\).)150 2518 y Fs(6.12)68
+b(Shell)46 b(Compatibilit)l(y)h(Mo)t(de)150 2677 y Fu(Bash-4.0)30
+b(in)m(tro)s(duced)d(the)i(concept)g(of)f(a)h(`shell)f(compatibilit)m
+(y)i(lev)m(el',)h(sp)s(eci\014ed)d(as)g(a)h(set)f(of)h(options)150
+2786 y(to)i(the)f(shopt)g(builtin)g(\()p Ft(compat31)p
+Fu(,)e Ft(compat32)p Fu(,)h Ft(compat40)p Fu(,)f Ft(compat41)p
+Fu(,)g(and)i(so)g(on\).)41 b(There)30 b(is)g(only)150
+2896 y(one)f(curren)m(t)f(compatibilit)m(y)j(lev)m(el)f({)f(eac)m(h)h
+(option)f(is)g(m)m(utually)g(exclusiv)m(e.)41 b(The)28
+b(compatibilit)m(y)j(lev)m(el)150 3006 y(is)39 b(in)m(tended)g(to)h
+(allo)m(w)g(users)e(to)i(select)h(b)s(eha)m(vior)e(from)f(previous)h(v)
+m(ersions)g(that)h(is)f(incompatible)150 3115 y(with)d(new)m(er)g(v)m
+(ersions)g(while)g(they)g(migrate)h(scripts)f(to)h(use)f(curren)m(t)f
+(features)i(and)e(b)s(eha)m(vior.)58 b(It's)150 3225
+y(in)m(tended)30 b(to)h(b)s(e)f(a)h(temp)s(orary)f(solution.)275
+3363 y(This)k(section)j(do)s(es)e(not)h(men)m(tion)g(b)s(eha)m(vior)g
+(that)g(is)f(standard)g(for)g(a)h(particular)g(v)m(ersion)g(\(e.g.,)150
+3473 y(setting)24 b Ft(compat32)e Fu(means)h(that)h(quoting)g(the)f
+(rhs)g(of)g(the)h(regexp)f(matc)m(hing)i(op)s(erator)e(quotes)h(sp)s
+(ecial)150 3582 y(regexp)31 b(c)m(haracters)g(in)g(the)f(w)m(ord,)g
+(whic)m(h)g(is)h(default)f(b)s(eha)m(vior)h(in)f(bash-3.2)h(and)f(ab)s
+(o)m(v)m(e\).)275 3720 y(If)f(a)h(user)f(enables,)h(sa)m(y)-8
+b(,)31 b Ft(compat32)p Fu(,)d(it)i(ma)m(y)g(a\013ect)h(the)f(b)s(eha)m
+(vior)g(of)g(other)g(compatibilit)m(y)h(lev)m(els)150
+3830 y(up)23 b(to)h(and)f(including)h(the)g(curren)m(t)f(compatibilit)m
+(y)j(lev)m(el.)41 b(The)23 b(idea)h(is)g(that)g(eac)m(h)h(compatibilit)
+m(y)h(lev)m(el)150 3939 y(con)m(trols)35 b(b)s(eha)m(vior)f(that)g(c)m
+(hanged)g(in)f(that)h(v)m(ersion)g(of)g(Bash,)h(but)e(that)h(b)s(eha)m
+(vior)g(ma)m(y)g(ha)m(v)m(e)h(b)s(een)150 4049 y(presen)m(t)f(in)g
+(earlier)g(v)m(ersions.)52 b(F)-8 b(or)35 b(instance,)g(the)f(c)m
+(hange)h(to)g(use)f(lo)s(cale-based)h(comparisons)f(with)150
+4159 y(the)e Ft([[)f Fu(command)g(came)h(in)g(bash-4.1,)h(and)d
+(earlier)j(v)m(ersions)f(used)f(ASCI)s(I-based)f(comparisons,)i(so)150
+4268 y(enabling)27 b Ft(compat32)e Fu(will)i(enable)g(ASCI)s(I-based)e
+(comparisons)i(as)g(w)m(ell.)41 b(That)26 b(gran)m(ularit)m(y)i(ma)m(y)
+g(not)150 4378 y(b)s(e)i(su\016cien)m(t)i(for)f(all)g(uses,)g(and)g(as)
+g(a)g(result)g(users)f(should)g(emplo)m(y)i(compatibilit)m(y)h(lev)m
+(els)g(carefully)-8 b(.)150 4487 y(Read)31 b(the)f(do)s(cumen)m(tation)
+h(for)g(a)f(particular)h(feature)g(to)g(\014nd)e(out)h(the)h(curren)m
+(t)f(b)s(eha)m(vior.)275 4625 y(Bash-4.3)44 b(in)m(tro)s(duced)e(a)h
+(new)f(shell)h(v)-5 b(ariable:)65 b Ft(BASH_COMPAT)p
+Fu(.)75 b(The)42 b(v)-5 b(alue)43 b(assigned)g(to)g(this)150
+4735 y(v)-5 b(ariable)32 b(\(a)g(decimal)h(v)m(ersion)e(n)m(um)m(b)s
+(er)f(lik)m(e)j(4.2,)g(or)e(an)h(in)m(teger)g(corresp)s(onding)f(to)h
+(the)f Ft(compat)p Fr(NN)150 4845 y Fu(option,)g(lik)m(e)h(42\))f
+(determines)g(the)f(compatibilit)m(y)j(lev)m(el.)275
+4983 y(Starting)e(with)g(bash-4.4,)h(Bash)f(has)g(b)s(egun)f
+(deprecating)h(older)h(compatibilit)m(y)h(lev)m(els.)44
+b(Ev)m(en)m(tu-)150 5092 y(ally)-8 b(,)32 b(the)e(options)h(will)g(b)s
+(e)f(remo)m(v)m(ed)h(in)f(fa)m(v)m(or)i(of)e Ft(BASH_COMPAT)p
+Fu(.)275 5230 y(Bash-5.0)36 b(is)f(the)g(\014nal)f(v)m(ersion)i(for)e
+(whic)m(h)h(there)g(will)g(b)s(e)f(an)h(individual)f(shopt)h(option)g
+(for)g(the)150 5340 y(previous)30 b(v)m(ersion.)41 b(Users)30
+b(should)g(use)g Ft(BASH_COMPAT)d Fu(on)j(bash-5.0)h(and)f(later)i(v)m
+(ersions.)p eop end
+%%Page: 105 111
+TeXDict begin 105 110 bop 150 -116 a Fu(Chapter)30 b(6:)41
+b(Bash)30 b(F)-8 b(eatures)2439 b(105)275 299 y(The)24
+b(follo)m(wing)i(table)g(describ)s(es)e(the)i(b)s(eha)m(vior)f(c)m
+(hanges)h(con)m(trolled)g(b)m(y)f(eac)m(h)h(compatibilit)m(y)h(lev)m
+(el)150 408 y(setting.)43 b(The)30 b Ft(compat)p Fr(NN)39
+b Fu(tag)32 b(is)f(used)f(as)h(shorthand)e(for)h(setting)i(the)f
+(compatibilit)m(y)i(lev)m(el)f(to)g Fr(NN)150 518 y Fu(using)37
+b(one)h(of)g(the)g(follo)m(wing)h(mec)m(hanisms.)63 b(F)-8
+b(or)39 b(v)m(ersions)f(prior)f(to)h(bash-5.0,)j(the)d(compatibilit)m
+(y)150 628 y(lev)m(el)d(ma)m(y)f(b)s(e)e(set)i(using)e(the)i(corresp)s
+(onding)e Ft(compat)p Fr(NN)41 b Fu(shopt)33 b(option.)50
+b(F)-8 b(or)34 b(bash-4.3)f(and)g(later)150 737 y(v)m(ersions,)40
+b(the)e Ft(BASH_COMPAT)d Fu(v)-5 b(ariable)39 b(is)e(preferred,)i(and)e
+(it)i(is)f(required)f(for)g(bash-5.1)i(and)e(later)150
+847 y(v)m(ersions.)150 1025 y Ft(compat31)705 1165 y
+Fq(\017)60 b Fu(quoting)34 b(the)g(rhs)e(of)i(the)f Ft([[)g
+Fu(command's)h(regexp)f(matc)m(hing)i(op)s(erator)f(\(=)p
+Ft(~)p Fu(\))f(has)810 1275 y(no)d(sp)s(ecial)h(e\013ect)150
+1446 y Ft(compat32)705 1587 y Fq(\017)60 b Fu(in)m(terrupting)28
+b(a)g(command)g(list)h(suc)m(h)f(as)g Ft(")p Fu(a)g(;)h(b)f(;)h(c)p
+Ft(")f Fu(causes)h(the)f(execution)h(of)g(the)810 1697
+y(next)j(command)f(in)g(the)h(list)g(\(in)f(bash-4.0)h(and)f(later)i(v)
+m(ersions,)f(the)g(shell)f(acts)i(as)810 1806 y(if)i(it)i(receiv)m(ed)f
+(the)g(in)m(terrupt,)h(so)f(in)m(terrupting)f(one)h(command)f(in)g(a)h
+(list)g(ab)s(orts)810 1916 y(the)31 b(execution)g(of)g(the)f(en)m(tire)
+i(list\))150 2087 y Ft(compat40)705 2228 y Fq(\017)60
+b Fu(the)35 b(`)p Ft(<)p Fu(')g(and)f(`)p Ft(>)p Fu(')g(op)s(erators)h
+(to)g(the)g Ft([[)f Fu(command)h(do)f(not)h(consider)f(the)h(curren)m
+(t)810 2338 y(lo)s(cale)41 b(when)d(comparing)i(strings;)k(they)c(use)f
+(ASCI)s(I)f(ordering.)67 b(Bash)40 b(v)m(ersions)810
+2447 y(prior)f(to)i(bash-4.1)f(use)g(ASCI)s(I)e(collation)k(and)d
+(strcmp\(3\);)45 b(bash-4.1)c(and)e(later)810 2557 y(use)30
+b(the)h(curren)m(t)f(lo)s(cale's)i(collation)h(sequence)d(and)g
+(strcoll\(3\).)150 2728 y Ft(compat41)705 2869 y Fq(\017)60
+b Fu(in)29 b(p)s(osix)f(mo)s(de,)i Ft(time)e Fu(ma)m(y)h(b)s(e)g(follo)
+m(w)m(ed)i(b)m(y)e(options)g(and)g(still)h(b)s(e)e(recognized)j(as)810
+2979 y(a)g(reserv)m(ed)f(w)m(ord)g(\(this)h(is)f Fm(posix)g
+Fu(in)m(terpretation)i(267\))705 3119 y Fq(\017)60 b
+Fu(in)37 b(p)s(osix)f(mo)s(de,)i(the)g(parser)e(requires)g(that)i(an)f
+(ev)m(en)g(n)m(um)m(b)s(er)f(of)h(single)g(quotes)810
+3229 y(o)s(ccur)28 b(in)g(the)h Fr(w)m(ord)i Fu(p)s(ortion)d(of)h(a)g
+(double-quoted)f($)p Fi({)6 b Fu(.)23 b(.)f(.)11 b Fi(})29
+b Fu(parameter)g(expansion)810 3338 y(and)34 b(treats)h(them)f(sp)s
+(ecially)-8 b(,)37 b(so)e(that)g(c)m(haracters)g(within)f(the)h(single)
+g(quotes)g(are)810 3448 y(considered)30 b(quoted)h(\(this)f(is)h
+Fm(posix)e Fu(in)m(terpretation)j(221\))150 3620 y Ft(compat42)705
+3760 y Fq(\017)60 b Fu(the)29 b(replacemen)m(t)i(string)e(in)g
+(double-quoted)h(pattern)f(substitution)g(do)s(es)g(not)h(un-)810
+3870 y(dergo)h(quote)g(remo)m(v)-5 b(al,)32 b(as)e(it)h(do)s(es)f(in)g
+(v)m(ersions)h(after)g(bash-4.2)705 4010 y Fq(\017)60
+b Fu(in)39 b(p)s(osix)g(mo)s(de,)j(single)e(quotes)g(are)g(considered)f
+(sp)s(ecial)h(when)f(expanding)g(the)810 4120 y Fr(w)m(ord)d
+Fu(p)s(ortion)c(of)g(a)h(double-quoted)g($)p Fi({)6 b
+Fu(.)22 b(.)h(.)11 b Fi(})33 b Fu(parameter)g(expansion)f(and)g(can)h
+(b)s(e)810 4230 y(used)40 b(to)i(quote)g(a)f(closing)h(brace)f(or)g
+(other)h(sp)s(ecial)f(c)m(haracter)i(\(this)e(is)g(part)g(of)810
+4339 y Fm(posix)36 b Fu(in)m(terpretation)h(221\);)42
+b(in)36 b(later)h(v)m(ersions,)h(single)f(quotes)g(are)g(not)f(sp)s
+(ecial)810 4449 y(within)30 b(double-quoted)g(w)m(ord)g(expansions)150
+4620 y Ft(compat43)705 4761 y Fq(\017)60 b Fu(the)31
+b(shell)g(do)s(es)g(not)g(prin)m(t)f(a)h(w)m(arning)g(message)h(if)f
+(an)g(attempt)h(is)f(made)f(to)i(use)f(a)810 4871 y(quoted)22
+b(comp)s(ound)f(assignmen)m(t)i(as)f(an)g(argumen)m(t)h(to)g(declare)g
+(\(declare)g(-a)g(fo)s(o='\(1)810 4980 y(2\)'\).)42 b(Later)31
+b(v)m(ersions)g(w)m(arn)f(that)h(this)f(usage)h(is)f(deprecated)705
+5121 y Fq(\017)60 b Fu(w)m(ord)21 b(expansion)g(errors)g(are)h
+(considered)f(non-fatal)h(errors)f(that)h(cause)g(the)f(curren)m(t)810
+5230 y(command)k(to)g(fail,)i(ev)m(en)e(in)g(p)s(osix)f(mo)s(de)h
+(\(the)g(default)g(b)s(eha)m(vior)g(is)g(to)g(mak)m(e)h(them)810
+5340 y(fatal)32 b(errors)d(that)i(cause)g(the)g(shell)f(to)i(exit\))p
+eop end
+%%Page: 106 112
+TeXDict begin 106 111 bop 150 -116 a Fu(Chapter)30 b(6:)41
+b(Bash)30 b(F)-8 b(eatures)2439 b(106)705 299 y Fq(\017)60
+b Fu(when)37 b(executing)i(a)g(shell)f(function,)i(the)f(lo)s(op)f
+(state)h(\(while/un)m(til/etc.\))68 b(is)38 b(not)810
+408 y(reset,)c(so)g Ft(break)d Fu(or)i Ft(continue)e
+Fu(in)h(that)i(function)f(will)g(break)g(or)g(con)m(tin)m(ue)h(lo)s
+(ops)810 518 y(in)h(the)g(calling)h(con)m(text.)57 b(Bash-4.4)37
+b(and)d(later)i(reset)g(the)f(lo)s(op)g(state)i(to)e(prev)m(en)m(t)810
+628 y(this)150 787 y Ft(compat44)705 922 y Fq(\017)60
+b Fu(the)41 b(shell)g(sets)g(up)e(the)i(v)-5 b(alues)41
+b(used)f(b)m(y)h Ft(BASH_ARGV)d Fu(and)i Ft(BASH_ARGC)e
+Fu(so)j(they)810 1031 y(can)26 b(expand)f(to)h(the)g(shell's)g(p)s
+(ositional)g(parameters)g(ev)m(en)h(if)e(extended)h(debugging)810
+1141 y(mo)s(de)k(is)g(not)h(enabled)705 1275 y Fq(\017)60
+b Fu(a)40 b(subshell)f(inherits)g(lo)s(ops)h(from)g(its)g(paren)m(t)g
+(con)m(text,)k(so)c Ft(break)e Fu(or)i Ft(continue)810
+1385 y Fu(will)35 b(cause)g(the)f(subshell)f(to)i(exit.)54
+b(Bash-5.0)36 b(and)d(later)j(reset)f(the)f(lo)s(op)h(state)g(to)810
+1494 y(prev)m(en)m(t)c(the)g(exit)705 1629 y Fq(\017)60
+b Fu(v)-5 b(ariable)28 b(assignmen)m(ts)h(preceding)f(builtins)f(lik)m
+(e)i Ft(export)d Fu(and)h Ft(readonly)e Fu(that)j(set)810
+1738 y(attributes)37 b(con)m(tin)m(ue)h(to)g(a\013ect)g(v)-5
+b(ariables)37 b(with)g(the)f(same)h(name)g(in)g(the)f(calling)810
+1848 y(en)m(vironmen)m(t)31 b(ev)m(en)g(if)f(the)h(shell)g(is)f(not)h
+(in)f(p)s(osix)f(mo)s(de)150 2007 y Ft(compat50)f(\(set)h(using)g
+(BASH_COMPAT\))705 2117 y Fq(\017)60 b Fu(Bash-5.1)29
+b(c)m(hanged)g(the)f(w)m(a)m(y)g Ft($RANDOM)e Fu(is)i(generated)h(to)f
+(in)m(tro)s(duce)g(sligh)m(tly)h(more)810 2227 y(randomness.)39
+b(If)30 b(the)f(shell)h(compatibilit)m(y)i(lev)m(el)f(is)f(set)g(to)h
+(50)f(or)g(lo)m(w)m(er,)h(it)f(rev)m(erts)810 2336 y(to)e(the)g(metho)s
+(d)f(from)g(bash-5.0)h(and)f(previous)g(v)m(ersions,)i(so)e(seeding)h
+(the)g(random)810 2446 y(n)m(um)m(b)s(er)36 b(generator)j(b)m(y)e
+(assigning)h(a)g(v)-5 b(alue)38 b(to)g Ft(RANDOM)e Fu(will)i(pro)s
+(duce)e(the)i(same)810 2555 y(sequence)31 b(as)f(in)g(bash-5.0)705
+2690 y Fq(\017)60 b Fu(If)22 b(the)g(command)g(hash)f(table)i(is)f
+(empt)m(y)-8 b(,)25 b(Bash)d(v)m(ersions)g(prior)g(to)h(bash-5.1)f
+(prin)m(ted)810 2800 y(an)29 b(informational)i(message)g(to)f(that)g
+(e\013ect,)h(ev)m(en)g(when)d(pro)s(ducing)g(output)h(that)810
+2909 y(can)40 b(b)s(e)g(reused)f(as)h(input.)69 b(Bash-5.1)42
+b(suppresses)c(that)j(message)g(when)e(the)i Ft(-l)810
+3019 y Fu(option)31 b(is)f(supplied.)p eop end
+%%Page: 107 113
+TeXDict begin 107 112 bop 3614 -116 a Fu(107)150 299
+y Fp(7)80 b(Job)54 b(Con)l(trol)150 518 y Fu(This)25
+b(c)m(hapter)i(discusses)f(what)g(job)f(con)m(trol)j(is,)f(ho)m(w)f(it)
+h(w)m(orks,)g(and)f(ho)m(w)g(Bash)g(allo)m(ws)h(y)m(ou)g(to)g(access)
+150 628 y(its)k(facilities.)150 863 y Fs(7.1)68 b(Job)45
+b(Con)l(trol)h(Basics)150 1022 y Fu(Job)27 b(con)m(trol)i(refers)e(to)h
+(the)g(abilit)m(y)h(to)f(selectiv)m(ely)j(stop)c(\(susp)s(end\))f(the)i
+(execution)h(of)e(pro)s(cesses)h(and)150 1132 y(con)m(tin)m(ue)38
+b(\(resume\))g(their)f(execution)h(at)g(a)g(later)g(p)s(oin)m(t.)61
+b(A)37 b(user)g(t)m(ypically)i(emplo)m(ys)f(this)f(facilit)m(y)150
+1241 y(via)27 b(an)e(in)m(teractiv)m(e)k(in)m(terface)f(supplied)d
+(join)m(tly)h(b)m(y)g(the)h(op)s(erating)f(system)g(k)m(ernel's)h
+(terminal)f(driv)m(er)150 1351 y(and)k(Bash.)275 1482
+y(The)23 b(shell)i(asso)s(ciates)h(a)f Fr(job)h Fu(with)e(eac)m(h)i
+(pip)s(eline.)38 b(It)25 b(k)m(eeps)f(a)h(table)h(of)e(curren)m(tly)h
+(executing)g(jobs,)150 1592 y(whic)m(h)33 b(ma)m(y)i(b)s(e)e(listed)h
+(with)f(the)h Ft(jobs)f Fu(command.)50 b(When)33 b(Bash)h(starts)g(a)g
+(job)g(async)m(hronously)-8 b(,)34 b(it)150 1701 y(prin)m(ts)c(a)h
+(line)f(that)h(lo)s(oks)g(lik)m(e:)390 1833 y Ft([1])47
+b(25647)150 1965 y Fu(indicating)34 b(that)g(this)f(job)g(is)g(job)g(n)
+m(um)m(b)s(er)f(1)i(and)f(that)g(the)h(pro)s(cess)f Fm(id)g
+Fu(of)g(the)h(last)g(pro)s(cess)f(in)g(the)150 2074 y(pip)s(eline)42
+b(asso)s(ciated)i(with)e(this)g(job)g(is)h(25647.)78
+b(All)43 b(of)g(the)g(pro)s(cesses)f(in)g(a)h(single)g(pip)s(eline)f
+(are)150 2184 y(mem)m(b)s(ers)30 b(of)g(the)h(same)f(job.)41
+b(Bash)30 b(uses)g(the)h Fr(job)h Fu(abstraction)f(as)g(the)g(basis)f
+(for)g(job)g(con)m(trol.)275 2315 y(T)-8 b(o)23 b(facilitate)j(the)d
+(implemen)m(tation)i(of)f(the)f(user)f(in)m(terface)j(to)f(job)f(con)m
+(trol,)j(the)d(op)s(erating)h(system)150 2425 y(main)m(tains)j(the)f
+(notion)h(of)f(a)g(curren)m(t)g(terminal)g(pro)s(cess)g(group)g
+Fm(id)p Fu(.)39 b(Mem)m(b)s(ers)26 b(of)g(this)g(pro)s(cess)f(group)150
+2534 y(\(pro)s(cesses)h(whose)g(pro)s(cess)g(group)g
+Fm(id)g Fu(is)h(equal)g(to)g(the)f(curren)m(t)g(terminal)h(pro)s(cess)f
+(group)f Fm(id)p Fu(\))i(receiv)m(e)150 2644 y(k)m(eyb)s
+(oard-generated)22 b(signals)g(suc)m(h)e(as)h Ft(SIGINT)p
+Fu(.)36 b(These)21 b(pro)s(cesses)g(are)g(said)g(to)g(b)s(e)g(in)f(the)
+h(foreground.)150 2754 y(Bac)m(kground)38 b(pro)s(cesses)f(are)h(those)
+g(whose)f(pro)s(cess)g(group)g Fm(id)h Fu(di\013ers)f(from)g(the)g
+(terminal's;)42 b(suc)m(h)150 2863 y(pro)s(cesses)24
+b(are)g(imm)m(une)g(to)g(k)m(eyb)s(oard-generated)h(signals.)40
+b(Only)23 b(foreground)g(pro)s(cesses)h(are)g(allo)m(w)m(ed)150
+2973 y(to)g(read)e(from)h(or,)h(if)f(the)g(user)f(so)i(sp)s(eci\014es)e
+(with)h Ft(stty)29 b(tostop)p Fu(,)23 b(write)g(to)g(the)h(terminal.)38
+b(Bac)m(kground)150 3082 y(pro)s(cesses)27 b(whic)m(h)g(attempt)h(to)f
+(read)g(from)g(\(write)g(to)h(when)e Ft(stty)j(tostop)d
+Fu(is)h(in)f(e\013ect\))j(the)e(terminal)150 3192 y(are)32
+b(sen)m(t)g(a)g Ft(SIGTTIN)e Fu(\()p Ft(SIGTTOU)p Fu(\))g(signal)i(b)m
+(y)g(the)g(k)m(ernel's)g(terminal)g(driv)m(er,)g(whic)m(h,)g(unless)f
+(caugh)m(t,)150 3302 y(susp)s(ends)d(the)i(pro)s(cess.)275
+3433 y(If)k(the)i(op)s(erating)g(system)f(on)h(whic)m(h)f(Bash)g(is)h
+(running)d(supp)s(orts)h(job)h(con)m(trol,)j(Bash)e(con)m(tains)150
+3543 y(facilities)30 b(to)f(use)f(it.)40 b(T)m(yping)28
+b(the)g Fr(susp)s(end)h Fu(c)m(haracter)h(\(t)m(ypically)g(`)p
+Ft(^Z)p Fu(',)f(Con)m(trol-Z\))g(while)f(a)g(pro)s(cess)150
+3652 y(is)42 b(running)f(causes)i(that)g(pro)s(cess)f(to)h(b)s(e)f
+(stopp)s(ed)f(and)h(returns)f(con)m(trol)j(to)f(Bash.)77
+b(T)m(yping)42 b(the)150 3762 y Fr(dela)m(y)m(ed)k(susp)s(end)f
+Fu(c)m(haracter)h(\(t)m(ypically)g(`)p Ft(^Y)p Fu(',)i(Con)m(trol-Y\))e
+(causes)e(the)h(pro)s(cess)e(to)i(b)s(e)f(stopp)s(ed)150
+3871 y(when)26 b(it)i(attempts)h(to)f(read)f(input)g(from)f(the)i
+(terminal,)h(and)e(con)m(trol)h(to)g(b)s(e)f(returned)f(to)j(Bash.)39
+b(The)150 3981 y(user)e(then)g(manipulates)h(the)g(state)h(of)f(this)f
+(job,)j(using)d(the)h Ft(bg)f Fu(command)g(to)h(con)m(tin)m(ue)h(it)f
+(in)g(the)150 4091 y(bac)m(kground,)g(the)f Ft(fg)g Fu(command)f(to)i
+(con)m(tin)m(ue)g(it)f(in)f(the)h(foreground,)h(or)f(the)g
+Ft(kill)f Fu(command)g(to)150 4200 y(kill)27 b(it.)40
+b(A)27 b(`)p Ft(^Z)p Fu(')g(tak)m(es)h(e\013ect)g(immediately)-8
+b(,)29 b(and)d(has)h(the)f(additional)i(side)e(e\013ect)j(of)d(causing)
+h(p)s(ending)150 4310 y(output)j(and)g(t)m(yp)s(eahead)h(to)g(b)s(e)e
+(discarded.)275 4441 y(There)j(are)g(a)h(n)m(um)m(b)s(er)e(of)i(w)m(a)m
+(ys)g(to)h(refer)e(to)h(a)g(job)f(in)g(the)h(shell.)47
+b(The)32 b(c)m(haracter)i(`)p Ft(\045)p Fu(')f(in)m(tro)s(duces)150
+4551 y(a)e(job)f(sp)s(eci\014cation)h(\()p Fr(jobsp)s(ec)6
+b Fu(\).)275 4682 y(Job)31 b(n)m(um)m(b)s(er)f Ft(n)h
+Fu(ma)m(y)h(b)s(e)f(referred)g(to)h(as)g(`)p Ft(\045n)p
+Fu('.)44 b(The)31 b(sym)m(b)s(ols)g(`)p Ft(\045\045)p
+Fu(')h(and)f(`)p Ft(\045+)p Fu(')g(refer)h(to)g(the)g(shell's)150
+4792 y(notion)k(of)f(the)g(curren)m(t)g(job,)h(whic)m(h)f(is)g(the)g
+(last)h(job)f(stopp)s(ed)f(while)h(it)h(w)m(as)g(in)e(the)i(foreground)
+e(or)150 4902 y(started)27 b(in)g(the)g(bac)m(kground.)40
+b(A)27 b(single)g(`)p Ft(\045)p Fu(')g(\(with)g(no)g(accompan)m(ying)i
+(job)d(sp)s(eci\014cation\))i(also)g(refers)150 5011
+y(to)k(the)e(curren)m(t)h(job.)42 b(The)30 b(previous)g(job)h(ma)m(y)g
+(b)s(e)f(referenced)h(using)f(`)p Ft(\045-)p Fu('.)42
+b(If)30 b(there)h(is)g(only)g(a)g(single)150 5121 y(job,)g(`)p
+Ft(\045+)p Fu(')g(and)f(`)p Ft(\045-)p Fu(')h(can)h(b)s(oth)e(b)s(e)g
+(used)h(to)g(refer)g(to)h(that)g(job.)42 b(In)30 b(output)h(p)s
+(ertaining)g(to)g(jobs)g(\(e.g.,)150 5230 y(the)39 b(output)f(of)g(the)
+h Ft(jobs)e Fu(command\),)k(the)d(curren)m(t)h(job)f(is)g(alw)m(a)m(ys)
+i(\015agged)f(with)f(a)h(`)p Ft(+)p Fu(',)i(and)d(the)150
+5340 y(previous)30 b(job)g(with)g(a)h(`)p Ft(-)p Fu('.)p
+eop end
+%%Page: 108 114
+TeXDict begin 108 113 bop 150 -116 a Fu(Chapter)30 b(7:)41
+b(Job)30 b(Con)m(trol)2526 b(108)275 299 y(A)38 b(job)g(ma)m(y)h(also)g
+(b)s(e)f(referred)f(to)j(using)d(a)i(pre\014x)e(of)i(the)f(name)h(used)
+e(to)i(start)g(it,)i(or)e(using)f(a)150 408 y(substring)g(that)j(app)s
+(ears)e(in)g(its)h(command)f(line.)69 b(F)-8 b(or)41
+b(example,)i(`)p Ft(\045ce)p Fu(')c(refers)g(to)i(a)f(stopp)s(ed)e(job)
+150 518 y(whose)30 b(command)g(name)g(b)s(egins)g(with)g(`)p
+Ft(ce)p Fu('.)40 b(Using)31 b(`)p Ft(\045?ce)p Fu(',)f(on)g(the)g
+(other)h(hand,)e(refers)h(to)h(an)m(y)f(job)150 628 y(con)m(taining)e
+(the)e(string)h(`)p Ft(ce)p Fu(')f(in)g(its)h(command)f(line.)40
+b(If)26 b(the)g(pre\014x)g(or)g(substring)f(matc)m(hes)j(more)e(than)
+150 737 y(one)31 b(job,)f(Bash)g(rep)s(orts)g(an)g(error.)275
+869 y(Simply)g(naming)h(a)g(job)g(can)g(b)s(e)f(used)h(to)g(bring)f(it)
+i(in)m(to)g(the)f(foreground:)41 b(`)p Ft(\0451)p Fu(')31
+b(is)g(a)h(synon)m(ym)e(for)150 978 y(`)p Ft(fg)g(\0451)p
+Fu(',)i(bringing)f(job)g(1)g(from)g(the)h(bac)m(kground)f(in)m(to)i
+(the)e(foreground.)44 b(Similarly)-8 b(,)32 b(`)p Ft(\0451)e(&)p
+Fu(')i(resumes)150 1088 y(job)e(1)h(in)f(the)g(bac)m(kground,)h(equiv)
+-5 b(alen)m(t)32 b(to)f(`)p Ft(bg)f(\0451)p Fu(')275
+1219 y(The)g(shell)i(learns)f(immediately)i(whenev)m(er)e(a)h(job)f(c)m
+(hanges)h(state.)45 b(Normally)-8 b(,)33 b(Bash)e(w)m(aits)i(un)m(til)
+150 1329 y(it)25 b(is)g(ab)s(out)f(to)i(prin)m(t)e(a)h(prompt)f(b)s
+(efore)g(rep)s(orting)h(c)m(hanges)g(in)g(a)g(job's)f(status)h(so)g(as)
+g(to)g(not)g(in)m(terrupt)150 1439 y(an)m(y)k(other)f(output.)40
+b(If)28 b(the)g Ft(-b)g Fu(option)g(to)h(the)g Ft(set)e
+Fu(builtin)h(is)g(enabled,)h(Bash)g(rep)s(orts)e(suc)m(h)h(c)m(hanges)
+150 1548 y(immediately)d(\(see)g(Section)g(4.3.1)g([The)f(Set)g
+(Builtin],)i(page)f(62\).)40 b(An)m(y)24 b(trap)f(on)h
+Ft(SIGCHLD)e Fu(is)i(executed)150 1658 y(for)30 b(eac)m(h)i(c)m(hild)e
+(pro)s(cess)g(that)h(exits.)275 1789 y(If)25 b(an)h(attempt)h(to)g
+(exit)g(Bash)f(is)h(made)f(while)g(jobs)f(are)i(stopp)s(ed,)f(\(or)h
+(running,)e(if)h(the)g Ft(checkjobs)150 1899 y Fu(option)e(is)f
+(enabled)h({)g(see)g(Section)g(4.3.2)h([The)e(Shopt)g(Builtin],)j(page)
+e(66\),)i(the)e(shell)f(prin)m(ts)g(a)h(w)m(arning)150
+2009 y(message,)k(and)c(if)i(the)f Ft(checkjobs)e Fu(option)j(is)f
+(enabled,)i(lists)e(the)h(jobs)f(and)f(their)i(statuses.)39
+b(The)25 b Ft(jobs)150 2118 y Fu(command)36 b(ma)m(y)h(then)f(b)s(e)f
+(used)g(to)i(insp)s(ect)f(their)g(status.)59 b(If)36
+b(a)g(second)g(attempt)i(to)f(exit)g(is)f(made)150 2228
+y(without)e(an)f(in)m(terv)m(ening)i(command,)f(Bash)g(do)s(es)f(not)h
+(prin)m(t)g(another)f(w)m(arning,)i(and)e(an)m(y)h(stopp)s(ed)150
+2337 y(jobs)c(are)h(terminated.)275 2469 y(When)f(the)h(shell)g(is)f(w)
+m(aiting)i(for)f(a)g(job)f(or)h(pro)s(cess)f(using)g(the)h
+Ft(wait)f Fu(builtin,)g(and)g(job)h(con)m(trol)h(is)150
+2578 y(enabled,)i Ft(wait)f Fu(will)g(return)g(when)f(the)i(job)f(c)m
+(hanges)h(state.)51 b(The)33 b Ft(-f)g Fu(option)h(causes)f
+Ft(wait)g Fu(to)h(w)m(ait)150 2688 y(un)m(til)d(the)f(job)g(or)h(pro)s
+(cess)f(terminates)h(b)s(efore)f(returning.)150 2923
+y Fs(7.2)68 b(Job)45 b(Con)l(trol)h(Builtins)150 3104
+y Ft(bg)870 3236 y(bg)h([)p Fj(jobspec)f Ft(...)o(])630
+3367 y Fu(Resume)24 b(eac)m(h)h(susp)s(ended)d(job)i
+Fr(jobsp)s(ec)29 b Fu(in)24 b(the)g(bac)m(kground,)h(as)g(if)f(it)h
+(had)e(b)s(een)g(started)630 3477 y(with)32 b(`)p Ft(&)p
+Fu('.)45 b(If)31 b Fr(jobsp)s(ec)37 b Fu(is)32 b(not)g(supplied,)f(the)
+h(curren)m(t)g(job)f(is)h(used.)45 b(The)31 b(return)g(status)630
+3586 y(is)i(zero)g(unless)f(it)h(is)g(run)e(when)h(job)g(con)m(trol)i
+(is)f(not)g(enabled,)h(or,)f(when)f(run)f(with)h(job)630
+3696 y(con)m(trol)h(enabled,)g(an)m(y)f Fr(jobsp)s(ec)37
+b Fu(w)m(as)32 b(not)g(found)f(or)g(sp)s(eci\014es)h(a)g(job)g(that)g
+(w)m(as)g(started)630 3806 y(without)e(job)g(con)m(trol.)150
+3959 y Ft(fg)870 4091 y(fg)47 b([)p Fj(jobspec)p Ft(])630
+4222 y Fu(Resume)c(the)g(job)g Fr(jobsp)s(ec)48 b Fu(in)43
+b(the)g(foreground)g(and)f(mak)m(e)j(it)e(the)h(curren)m(t)f(job.)78
+b(If)630 4332 y Fr(jobsp)s(ec)41 b Fu(is)c(not)f(supplied,)h(the)f
+(curren)m(t)h(job)f(is)g(used.)58 b(The)36 b(return)f(status)h(is)h
+(that)g(of)630 4441 y(the)d(command)g(placed)h(in)m(to)g(the)f
+(foreground,)g(or)g(non-zero)h(if)f(run)f(when)g(job)g(con)m(trol)630
+4551 y(is)i(disabled)g(or,)i(when)d(run)g(with)h(job)g(con)m(trol)h
+(enabled,)h Fr(jobsp)s(ec)j Fu(do)s(es)35 b(not)h(sp)s(ecify)f(a)630
+4660 y(v)-5 b(alid)31 b(job)f(or)g Fr(jobsp)s(ec)35 b
+Fu(sp)s(eci\014es)30 b(a)h(job)f(that)h(w)m(as)g(started)g(without)f
+(job)g(con)m(trol.)150 4814 y Ft(jobs)870 4945 y(jobs)47
+b([-lnprs])e([)p Fj(jobspec)p Ft(])870 5055 y(jobs)i(-x)g
+Fj(command)f Ft([)p Fj(arguments)p Ft(])630 5187 y Fu(The)30
+b(\014rst)f(form)h(lists)h(the)g(activ)m(e)h(jobs.)41
+b(The)30 b(options)g(ha)m(v)m(e)i(the)e(follo)m(wing)i(meanings:)630
+5340 y Ft(-l)384 b Fu(List)31 b(pro)s(cess)f Fm(id)p
+Fu(s)g(in)g(addition)h(to)g(the)f(normal)h(information.)p
+eop end
+%%Page: 109 115
+TeXDict begin 109 114 bop 150 -116 a Fu(Chapter)30 b(7:)41
+b(Job)30 b(Con)m(trol)2526 b(109)630 299 y Ft(-n)384
+b Fu(Displa)m(y)26 b(information)f(only)h(ab)s(out)e(jobs)h(that)g(ha)m
+(v)m(e)i(c)m(hanged)e(status)h(since)1110 408 y(the)31
+b(user)e(w)m(as)i(last)g(noti\014ed)f(of)h(their)f(status.)630
+583 y Ft(-p)384 b Fu(List)31 b(only)f(the)h(pro)s(cess)f
+Fm(id)g Fu(of)h(the)f(job's)g(pro)s(cess)g(group)g(leader.)630
+757 y Ft(-r)384 b Fu(Displa)m(y)32 b(only)e(running)f(jobs.)630
+931 y Ft(-s)384 b Fu(Displa)m(y)32 b(only)e(stopp)s(ed)f(jobs.)630
+1105 y(If)23 b Fr(jobsp)s(ec)28 b Fu(is)23 b(giv)m(en,)i(output)e(is)g
+(restricted)h(to)g(information)f(ab)s(out)g(that)h(job.)37
+b(If)23 b Fr(jobsp)s(ec)630 1214 y Fu(is)30 b(not)h(supplied,)e(the)i
+(status)g(of)f(all)h(jobs)f(is)h(listed.)630 1356 y(If)k(the)g
+Ft(-x)f Fu(option)i(is)f(supplied,)g Ft(jobs)f Fu(replaces)i(an)m(y)f
+Fr(jobsp)s(ec)40 b Fu(found)34 b(in)h Fr(command)j Fu(or)630
+1466 y Fr(argumen)m(ts)j Fu(with)c(the)h(corresp)s(onding)e(pro)s(cess)
+h(group)f Fm(id)p Fu(,)k(and)c(executes)j Fr(command)p
+Fu(,)630 1575 y(passing)30 b(it)h Fr(argumen)m(t)r Fu(s,)g(returning)f
+(its)g(exit)i(status.)150 1749 y Ft(kill)870 1891 y(kill)47
+b([-s)g Fj(sigspec)p Ft(])e([-n)i Fj(signum)p Ft(])f([-)p
+Fj(sigspec)p Ft(])f Fj(jobspec)h Ft(or)h Fj(pid)870 2001
+y Ft(kill)g(-l|-L)f([)p Fj(exit_status)p Ft(])630 2143
+y Fu(Send)22 b(a)i(signal)g(sp)s(eci\014ed)f(b)m(y)g
+Fr(sigsp)s(ec)29 b Fu(or)24 b Fr(sign)m(um)f Fu(to)h(the)g(pro)s(cess)f
+(named)g(b)m(y)g(job)g(sp)s(eci\014-)630 2252 y(cation)k
+Fr(jobsp)s(ec)j Fu(or)25 b(pro)s(cess)g Fm(id)h Fr(pid)p
+Fu(.)38 b Fr(sigsp)s(ec)31 b Fu(is)25 b(either)h(a)g(case-insensitiv)m
+(e)i(signal)e(name)630 2362 y(suc)m(h)37 b(as)g Ft(SIGINT)f
+Fu(\(with)h(or)g(without)g(the)g Ft(SIG)g Fu(pre\014x\))f(or)h(a)h
+(signal)g(n)m(um)m(b)s(er;)h Fr(sign)m(um)630 2471 y
+Fu(is)g(a)f(signal)i(n)m(um)m(b)s(er.)63 b(If)39 b Fr(sigsp)s(ec)44
+b Fu(and)38 b Fr(sign)m(um)g Fu(are)h(not)g(presen)m(t,)h
+Ft(SIGTERM)d Fu(is)h(used.)630 2581 y(The)27 b Ft(-l)h
+Fu(option)g(lists)h(the)f(signal)h(names.)39 b(If)28
+b(an)m(y)g(argumen)m(ts)h(are)f(supplied)f(when)g Ft(-l)g
+Fu(is)630 2690 y(giv)m(en,)32 b(the)g(names)e(of)i(the)f(signals)g
+(corresp)s(onding)f(to)i(the)f(argumen)m(ts)g(are)h(listed,)g(and)630
+2800 y(the)c(return)f(status)h(is)g(zero.)41 b Fr(exit)p
+1796 2800 28 4 v 41 w(status)32 b Fu(is)c(a)g(n)m(um)m(b)s(er)f(sp)s
+(ecifying)g(a)i(signal)f(n)m(um)m(b)s(er)f(or)630 2910
+y(the)h(exit)h(status)g(of)f(a)h(pro)s(cess)e(terminated)i(b)m(y)f(a)h
+(signal.)40 b(The)28 b Ft(-L)g Fu(option)g(is)g(equiv)-5
+b(alen)m(t)630 3019 y(to)34 b Ft(-l)p Fu(.)47 b(The)32
+b(return)g(status)h(is)g(zero)g(if)g(at)g(least)h(one)f(signal)h(w)m
+(as)f(successfully)g(sen)m(t,)h(or)630 3129 y(non-zero)d(if)f(an)h
+(error)f(o)s(ccurs)g(or)g(an)g(in)m(v)-5 b(alid)31 b(option)g(is)f
+(encoun)m(tered.)150 3303 y Ft(wait)870 3445 y(wait)47
+b([-fn])f([-p)h Fj(varname)p Ft(])e([)p Fj(jobspec)h
+Ft(or)h Fj(pid)g Ft(...)o(])630 3587 y Fu(W)-8 b(ait)28
+b(un)m(til)f(the)f(c)m(hild)h(pro)s(cess)f(sp)s(eci\014ed)g(b)m(y)g
+(eac)m(h)h(pro)s(cess)f Fm(id)h Fr(pid)i Fu(or)d(job)g(sp)s
+(eci\014cation)630 3696 y Fr(jobsp)s(ec)40 b Fu(exits)35
+b(and)f(return)g(the)g(exit)i(status)f(of)g(the)g(last)g(command)f(w)m
+(aited)i(for.)53 b(If)35 b(a)630 3806 y(job)g(sp)s(ec)f(is)h(giv)m(en,)
+i(all)f(pro)s(cesses)f(in)f(the)h(job)g(are)g(w)m(aited)h(for.)54
+b(If)35 b(no)f(argumen)m(ts)i(are)630 3915 y(giv)m(en,)28
+b Ft(wait)c Fu(w)m(aits)j(for)e(all)i(running)c(bac)m(kground)j(jobs)f
+(and)g(the)h(last-executed)h(pro)s(cess)630 4025 y(substitution,)37
+b(if)f(its)g(pro)s(cess)f(id)h(is)f(the)h(same)g(as)g
+Fr($!)p Fu(,)i(and)d(the)h(return)f(status)h(is)g(zero.)630
+4134 y(If)h(the)h Ft(-n)f Fu(option)h(is)f(supplied,)i
+Ft(wait)d Fu(w)m(aits)j(for)e(a)h(single)g(job)f(from)g(the)h(list)g
+(of)g Fr(pids)630 4244 y Fu(or)31 b Fr(jobsp)s(ecs)k
+Fu(or,)d(if)f(no)g(argumen)m(ts)h(are)g(supplied,)e(an)m(y)i(job,)f(to)
+i(complete)f(and)f(returns)630 4354 y(its)36 b(exit)h(status.)56
+b(If)35 b(none)h(of)g(the)g(supplied)e(argumen)m(ts)i(is)f(a)h(c)m
+(hild)g(of)g(the)g(shell,)h(or)f(if)630 4463 y(no)31
+b(argumen)m(ts)g(are)g(supplied)f(and)g(the)h(shell)g(has)g(no)f(un)m
+(w)m(aited-for)i(c)m(hildren,)f(the)g(exit)630 4573 y(status)k(is)g
+(127.)55 b(If)34 b(the)h Ft(-p)g Fu(option)g(is)g(supplied,)f(the)h
+(pro)s(cess)g(or)f(job)h(iden)m(ti\014er)g(of)g(the)630
+4682 y(job)j(for)g(whic)m(h)f(the)i(exit)g(status)f(is)g(returned)f(is)
+h(assigned)h(to)g(the)f(v)-5 b(ariable)39 b Fr(v)-5 b(arname)630
+4792 y Fu(named)29 b(b)m(y)f(the)i(option)f(argumen)m(t.)41
+b(The)28 b(v)-5 b(ariable)30 b(will)g(b)s(e)e(unset)h(initially)-8
+b(,)31 b(b)s(efore)e(an)m(y)630 4902 y(assignmen)m(t.)76
+b(This)41 b(is)h(useful)f(only)h(when)f(the)h Ft(-n)f
+Fu(option)i(is)f(supplied.)74 b(Supplying)630 5011 y(the)39
+b Ft(-f)f Fu(option,)k(when)37 b(job)i(con)m(trol)h(is)f(enabled,)i
+(forces)e Ft(wait)e Fu(to)j(w)m(ait)g(for)e(eac)m(h)i
+Fr(pid)630 5121 y Fu(or)29 b Fr(jobsp)s(ec)34 b Fu(to)c(terminate)g(b)s
+(efore)f(returning)f(its)h(status,)h(in)m(tead)g(of)f(returning)f(when)
+g(it)630 5230 y(c)m(hanges)37 b(status.)58 b(If)35 b(neither)h
+Fr(jobsp)s(ec)41 b Fu(nor)36 b Fr(pid)i Fu(sp)s(eci\014es)e(an)g(activ)
+m(e)i(c)m(hild)e(pro)s(cess)g(of)630 5340 y(the)31 b(shell,)f(the)h
+(return)e(status)i(is)f(127.)p eop end
+%%Page: 110 116
+TeXDict begin 110 115 bop 150 -116 a Fu(Chapter)30 b(7:)41
+b(Job)30 b(Con)m(trol)2526 b(110)150 299 y Ft(disown)870
+433 y(disown)46 b([-ar])g([-h])h([)p Fj(jobspec)f Ft(...)h(|)g
+Fj(pid)g Ft(...)g(])630 568 y Fu(Without)33 b(options,)h(remo)m(v)m(e)g
+(eac)m(h)f Fr(jobsp)s(ec)38 b Fu(from)32 b(the)h(table)g(of)g(activ)m
+(e)h(jobs.)47 b(If)32 b(the)h Ft(-h)630 677 y Fu(option)j(is)f(giv)m
+(en,)i(the)f(job)f(is)g(not)g(remo)m(v)m(ed)h(from)f(the)g(table,)j
+(but)c(is)i(mark)m(ed)f(so)g(that)630 787 y Ft(SIGHUP)e
+Fu(is)j(not)f(sen)m(t)h(to)g(the)f(job)g(if)g(the)g(shell)h(receiv)m
+(es)h(a)e Ft(SIGHUP)p Fu(.)54 b(If)34 b Fr(jobsp)s(ec)40
+b Fu(is)c(not)630 897 y(presen)m(t,)41 b(and)d(neither)h(the)g
+Ft(-a)f Fu(nor)g(the)h Ft(-r)f Fu(option)h(is)g(supplied,)g(the)g
+(curren)m(t)g(job)f(is)630 1006 y(used.)g(If)25 b(no)h
+Fr(jobsp)s(ec)k Fu(is)c(supplied,)f(the)h Ft(-a)f Fu(option)h(means)g
+(to)g(remo)m(v)m(e)h(or)e(mark)h(all)g(jobs;)630 1116
+y(the)31 b Ft(-r)e Fu(option)i(without)g(a)f Fr(jobsp)s(ec)36
+b Fu(argumen)m(t)30 b(restricts)h(op)s(eration)g(to)g(running)e(jobs.)
+150 1275 y Ft(suspend)870 1410 y(suspend)46 b([-f])630
+1544 y Fu(Susp)s(end)31 b(the)i(execution)h(of)g(this)f(shell)g(un)m
+(til)h(it)g(receiv)m(es)h(a)e Ft(SIGCONT)f Fu(signal.)50
+b(A)33 b(login)630 1654 y(shell)28 b(cannot)g(b)s(e)f(susp)s(ended;)g
+(the)g Ft(-f)g Fu(option)i(can)f(b)s(e)f(used)g(to)h(o)m(v)m(erride)h
+(this)e(and)g(force)630 1763 y(the)k(susp)s(ension.)275
+1923 y(When)f(job)f(con)m(trol)j(is)e(not)h(activ)m(e,)i(the)d
+Ft(kill)f Fu(and)h Ft(wait)f Fu(builtins)g(do)h(not)h(accept)h
+Fr(jobsp)s(ec)j Fu(argu-)150 2032 y(men)m(ts.)41 b(They)30
+b(m)m(ust)g(b)s(e)g(supplied)f(pro)s(cess)h Fm(id)p Fu(s.)150
+2273 y Fs(7.3)68 b(Job)45 b(Con)l(trol)h(V)-11 b(ariables)150
+2457 y Ft(auto_resume)630 2567 y Fu(This)31 b(v)-5 b(ariable)32
+b(con)m(trols)g(ho)m(w)g(the)f(shell)h(in)m(teracts)h(with)e(the)h
+(user)e(and)h(job)g(con)m(trol.)45 b(If)630 2677 y(this)28
+b(v)-5 b(ariable)30 b(exists)f(then)f(single)h(w)m(ord)f(simple)h
+(commands)f(without)g(redirections)i(are)630 2786 y(treated)h(as)g
+(candidates)f(for)g(resumption)g(of)g(an)g(existing)h(job.)41
+b(There)29 b(is)h(no)h(am)m(biguit)m(y)630 2896 y(allo)m(w)m(ed;)f(if)d
+(there)g(is)g(more)g(than)f(one)h(job)g(b)s(eginning)f(with)g(the)h
+(string)g(t)m(yp)s(ed,)g(then)g(the)630 3005 y(most)j(recen)m(tly)h
+(accessed)f(job)f(will)h(b)s(e)f(selected.)42 b(The)29
+b(name)g(of)h(a)g(stopp)s(ed)e(job,)i(in)f(this)630 3115
+y(con)m(text,)h(is)e(the)g(command)g(line)g(used)f(to)h(start)g(it.)41
+b(If)27 b(this)h(v)-5 b(ariable)28 b(is)g(set)g(to)h(the)e(v)-5
+b(alue)630 3225 y(`)p Ft(exact)p Fu(',)33 b(the)g(string)g(supplied)f
+(m)m(ust)h(matc)m(h)g(the)h(name)f(of)g(a)g(stopp)s(ed)f(job)h
+(exactly;)j(if)630 3334 y(set)29 b(to)h(`)p Ft(substring)p
+Fu(',)d(the)i(string)g(supplied)e(needs)i(to)g(matc)m(h)h(a)f
+(substring)f(of)h(the)g(name)630 3444 y(of)38 b(a)f(stopp)s(ed)g(job.)
+62 b(The)37 b(`)p Ft(substring)p Fu(')e(v)-5 b(alue)38
+b(pro)m(vides)f(functionalit)m(y)i(analogous)g(to)630
+3553 y(the)c(`)p Ft(\045?)p Fu(')g(job)g Fm(id)g Fu(\(see)h(Section)g
+(7.1)g([Job)e(Con)m(trol)i(Basics],)i(page)e(107\).)56
+b(If)34 b(set)i(to)g(an)m(y)630 3663 y(other)c(v)-5 b(alue,)32
+b(the)g(supplied)e(string)i(m)m(ust)f(b)s(e)g(a)h(pre\014x)f(of)h(a)g
+(stopp)s(ed)e(job's)i(name;)g(this)630 3773 y(pro)m(vides)e
+(functionalit)m(y)i(analogous)g(to)f(the)g(`)p Ft(\045)p
+Fu(')f(job)g Fm(id)p Fu(.)p eop end
+%%Page: 111 117
+TeXDict begin 111 116 bop 3614 -116 a Fu(111)150 299
+y Fp(8)80 b(Command)54 b(Line)f(Editing)150 635 y Fu(This)28
+b(c)m(hapter)i(describ)s(es)e(the)h(basic)g(features)h(of)f(the)g
+Fm(gnu)f Fu(command)h(line)g(editing)h(in)m(terface.)42
+b(Com-)150 745 y(mand)c(line)i(editing)f(is)g(pro)m(vided)g(b)m(y)g
+(the)g(Readline)h(library)-8 b(,)41 b(whic)m(h)e(is)g(used)f(b)m(y)h
+(sev)m(eral)h(di\013eren)m(t)150 855 y(programs,)34 b(including)e
+(Bash.)49 b(Command)32 b(line)i(editing)f(is)g(enabled)g(b)m(y)g
+(default)g(when)f(using)h(an)g(in-)150 964 y(teractiv)m(e)h(shell,)d
+(unless)g(the)g Ft(--noediting)d Fu(option)k(is)f(supplied)e(at)j
+(shell)f(in)m(v)m(o)s(cation.)45 b(Line)31 b(editing)150
+1074 y(is)g(also)h(used)f(when)f(using)h(the)g Ft(-e)g
+Fu(option)h(to)g(the)f Ft(read)f Fu(builtin)h(command)g(\(see)h
+(Section)g(4.2)h([Bash)150 1183 y(Builtins],)j(page)f(51\).)52
+b(By)35 b(default,)g(the)f(line)h(editing)f(commands)g(are)h(similar)f
+(to)h(those)f(of)g(Emacs.)150 1293 y(A)h(vi-st)m(yle)h(line)f(editing)g
+(in)m(terface)h(is)e(also)i(a)m(v)-5 b(ailable.)55 b(Line)34
+b(editing)h(can)g(b)s(e)f(enabled)g(at)h(an)m(y)g(time)150
+1402 y(using)h(the)g Ft(-o)30 b(emacs)35 b Fu(or)h Ft(-o)30
+b(vi)35 b Fu(options)i(to)g(the)f Ft(set)f Fu(builtin)h(command)g
+(\(see)h(Section)g(4.3.1)h([The)150 1512 y(Set)31 b(Builtin],)g(page)g
+(62\),)h(or)e(disabled)g(using)g(the)h Ft(+o)e(emacs)g
+Fu(or)i Ft(+o)e(vi)h Fu(options)h(to)g Ft(set)p Fu(.)150
+1804 y Fs(8.1)68 b(In)l(tro)t(duction)45 b(to)g(Line)h(Editing)150
+1963 y Fu(The)30 b(follo)m(wing)i(paragraphs)d(describ)s(e)h(the)h
+(notation)g(used)f(to)h(represen)m(t)f(k)m(eystrok)m(es.)275
+2132 y(The)35 b(text)i Fj(C-k)f Fu(is)g(read)g(as)h(`Con)m(trol-K')g
+(and)f(describ)s(es)f(the)h(c)m(haracter)i(pro)s(duced)d(when)g(the)h
+Ft(k)150 2242 y Fu(k)m(ey)31 b(is)g(pressed)e(while)h(the)h(Con)m(trol)
+g(k)m(ey)g(is)g(depressed.)275 2410 y(The)g(text)i Fj(M-k)e
+Fu(is)h(read)f(as)i(`Meta-K')g(and)f(describ)s(es)f(the)h(c)m(haracter)
+h(pro)s(duced)e(when)f(the)i(Meta)150 2520 y(k)m(ey)i(\(if)f(y)m(ou)h
+(ha)m(v)m(e)g(one\))g(is)f(depressed,)g(and)f(the)h Ft(k)g
+Fu(k)m(ey)h(is)f(pressed.)48 b(The)32 b(Meta)j(k)m(ey)e(is)h(lab)s
+(eled)f Ft(ALT)150 2629 y Fu(on)c(man)m(y)h(k)m(eyb)s(oards.)40
+b(On)29 b(k)m(eyb)s(oards)g(with)h(t)m(w)m(o)h(k)m(eys)f(lab)s(eled)g
+Ft(ALT)e Fu(\(usually)i(to)g(either)g(side)g(of)g(the)150
+2739 y(space)h(bar\),)f(the)g Ft(ALT)f Fu(on)h(the)g(left)h(side)f(is)g
+(generally)h(set)f(to)h(w)m(ork)f(as)g(a)h(Meta)g(k)m(ey)-8
+b(.)42 b(The)29 b Ft(ALT)g Fu(k)m(ey)i(on)150 2849 y(the)c(righ)m(t)h
+(ma)m(y)g(also)g(b)s(e)f(con\014gured)f(to)i(w)m(ork)f(as)h(a)f(Meta)i
+(k)m(ey)f(or)f(ma)m(y)h(b)s(e)e(con\014gured)h(as)g(some)h(other)150
+2958 y(mo)s(di\014er,)i(suc)m(h)g(as)g(a)h(Comp)s(ose)f(k)m(ey)h(for)f
+(t)m(yping)h(accen)m(ted)h(c)m(haracters.)275 3127 y(If)23
+b(y)m(ou)i(do)f(not)h(ha)m(v)m(e)h(a)f(Meta)g(or)g Ft(ALT)e
+Fu(k)m(ey)-8 b(,)27 b(or)e(another)f(k)m(ey)i(w)m(orking)e(as)h(a)g
+(Meta)h(k)m(ey)-8 b(,)27 b(the)d(iden)m(tical)150 3236
+y(k)m(eystrok)m(e)30 b(can)f(b)s(e)f(generated)h(b)m(y)g(t)m(yping)g
+Ft(ESC)e Fl(\014rst)p Fu(,)j(and)e(then)g(t)m(yping)h
+Ft(k)p Fu(.)40 b(Either)28 b(pro)s(cess)g(is)g(kno)m(wn)150
+3346 y(as)j Fr(metafying)39 b Fu(the)30 b Ft(k)g Fu(k)m(ey)-8
+b(.)275 3515 y(The)39 b(text)j Fj(M-C-k)d Fu(is)h(read)g(as)h
+(`Meta-Con)m(trol-k')j(and)39 b(describ)s(es)h(the)g(c)m(haracter)i
+(pro)s(duced)d(b)m(y)150 3624 y Fr(metafying)g Fj(C-k)p
+Fu(.)275 3793 y(In)c(addition,)j(sev)m(eral)f(k)m(eys)g(ha)m(v)m(e)g
+(their)f(o)m(wn)g(names.)58 b(Sp)s(eci\014cally)-8 b(,)38
+b Ft(DEL)p Fu(,)f Ft(ESC)p Fu(,)g Ft(LFD)p Fu(,)g Ft(SPC)p
+Fu(,)g Ft(RET)p Fu(,)150 3902 y(and)d Ft(TAB)f Fu(all)j(stand)e(for)g
+(themselv)m(es)i(when)d(seen)i(in)f(this)g(text,)j(or)d(in)h(an)f(init)
+h(\014le)f(\(see)i(Section)f(8.3)150 4012 y([Readline)f(Init)g(File],)i
+(page)e(114\).)52 b(If)33 b(y)m(our)g(k)m(eyb)s(oard)h(lac)m(ks)g(a)g
+Ft(LFD)f Fu(k)m(ey)-8 b(,)36 b(t)m(yping)e Ft(C-j)e Fu(will)i(pro)s
+(duce)150 4122 y(the)d(desired)e(c)m(haracter.)43 b(The)30
+b Ft(RET)f Fu(k)m(ey)i(ma)m(y)g(b)s(e)f(lab)s(eled)h
+Ft(Return)d Fu(or)j Ft(Enter)d Fu(on)j(some)g(k)m(eyb)s(oards.)150
+4413 y Fs(8.2)68 b(Readline)47 b(In)l(teraction)150 4573
+y Fu(Often)32 b(during)g(an)g(in)m(teractiv)m(e)j(session)e(y)m(ou)g(t)
+m(yp)s(e)g(in)f(a)h(long)g(line)g(of)f(text,)j(only)d(to)i(notice)g
+(that)f(the)150 4682 y(\014rst)f(w)m(ord)g(on)g(the)g(line)h(is)g
+(missp)s(elled.)46 b(The)32 b(Readline)h(library)f(giv)m(es)h(y)m(ou)g
+(a)g(set)g(of)f(commands)g(for)150 4792 y(manipulating)e(the)g(text)h
+(as)f(y)m(ou)g(t)m(yp)s(e)g(it)g(in,)g(allo)m(wing)h(y)m(ou)f(to)h
+(just)e(\014x)g(y)m(our)h(t)m(yp)s(o,)g(and)g(not)g(forcing)150
+4902 y(y)m(ou)e(to)h(ret)m(yp)s(e)g(the)f(ma)5 b(jorit)m(y)29
+b(of)f(the)h(line.)40 b(Using)28 b(these)h(editing)g(commands,)f(y)m
+(ou)h(mo)m(v)m(e)g(the)g(cursor)150 5011 y(to)35 b(the)f(place)i(that)e
+(needs)g(correction,)j(and)d(delete)h(or)f(insert)h(the)f(text)h(of)g
+(the)f(corrections.)54 b(Then,)150 5121 y(when)24 b(y)m(ou)h(are)g
+(satis\014ed)g(with)g(the)g(line,)i(y)m(ou)e(simply)f(press)g
+Ft(RET)p Fu(.)39 b(Y)-8 b(ou)25 b(do)g(not)g(ha)m(v)m(e)h(to)g(b)s(e)e
+(at)h(the)h(end)150 5230 y(of)33 b(the)h(line)g(to)g(press)e
+Ft(RET)p Fu(;)i(the)g(en)m(tire)g(line)f(is)h(accepted)g(regardless)g
+(of)f(the)h(lo)s(cation)h(of)e(the)h(cursor)150 5340
+y(within)c(the)g(line.)p eop end
+%%Page: 112 118
+TeXDict begin 112 117 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(112)150 299 y Fk(8.2.1)63
+b(Readline)40 b(Bare)h(Essen)m(tials)150 446 y Fu(In)31
+b(order)h(to)h(en)m(ter)g(c)m(haracters)g(in)m(to)g(the)g(line,)g
+(simply)e(t)m(yp)s(e)i(them.)46 b(The)31 b(t)m(yp)s(ed)h(c)m(haracter)i
+(app)s(ears)150 555 y(where)e(the)h(cursor)e(w)m(as,)j(and)e(then)g
+(the)h(cursor)e(mo)m(v)m(es)j(one)f(space)g(to)g(the)g(righ)m(t.)47
+b(If)32 b(y)m(ou)h(mist)m(yp)s(e)g(a)150 665 y(c)m(haracter,)f(y)m(ou)f
+(can)g(use)f(y)m(our)g(erase)h(c)m(haracter)h(to)f(bac)m(k)g(up)f(and)f
+(delete)j(the)f(mist)m(yp)s(ed)e(c)m(haracter.)275 806
+y(Sometimes)i(y)m(ou)g(ma)m(y)h(mist)m(yp)s(e)e(a)i(c)m(haracter,)g
+(and)e(not)i(notice)g(the)f(error)f(un)m(til)h(y)m(ou)g(ha)m(v)m(e)h(t)
+m(yp)s(ed)150 916 y(sev)m(eral)e(other)f(c)m(haracters.)42
+b(In)28 b(that)i(case,)g(y)m(ou)f(can)g(t)m(yp)s(e)h
+Fj(C-b)d Fu(to)j(mo)m(v)m(e)g(the)f(cursor)g(to)g(the)g(left,)i(and)150
+1026 y(then)f(correct)i(y)m(our)e(mistak)m(e.)42 b(Afterw)m(ards,)31
+b(y)m(ou)f(can)h(mo)m(v)m(e)h(the)e(cursor)g(to)h(the)g(righ)m(t)g
+(with)f Fj(C-f)p Fu(.)275 1167 y(When)i(y)m(ou)h(add)f(text)h(in)f(the)
+h(middle)f(of)h(a)g(line,)h(y)m(ou)e(will)h(notice)h(that)f(c)m
+(haracters)h(to)g(the)e(righ)m(t)150 1277 y(of)d(the)g(cursor)f(are)h
+(`pushed)e(o)m(v)m(er')j(to)g(mak)m(e)f(ro)s(om)g(for)f(the)h(text)h
+(that)f(y)m(ou)g(ha)m(v)m(e)h(inserted.)40 b(Lik)m(ewise,)150
+1386 y(when)d(y)m(ou)g(delete)i(text)g(b)s(ehind)c(the)j(cursor,)h(c)m
+(haracters)g(to)f(the)g(righ)m(t)g(of)g(the)g(cursor)e(are)i(`pulled)
+150 1496 y(bac)m(k')24 b(to)f(\014ll)g(in)f(the)h(blank)f(space)i
+(created)f(b)m(y)g(the)g(remo)m(v)-5 b(al)24 b(of)f(the)g(text.)39
+b(A)23 b(list)g(of)g(the)g(bare)f(essen)m(tials)150 1605
+y(for)30 b(editing)h(the)g(text)g(of)g(an)f(input)f(line)i(follo)m(ws.)
+150 1775 y Fj(C-b)336 b Fu(Mo)m(v)m(e)32 b(bac)m(k)g(one)e(c)m
+(haracter.)150 1941 y Fj(C-f)336 b Fu(Mo)m(v)m(e)32 b(forw)m(ard)e(one)
+h(c)m(haracter.)150 2108 y Ft(DEL)e Fu(or)i Ft(Backspace)630
+2217 y Fu(Delete)i(the)d(c)m(haracter)i(to)f(the)g(left)g(of)f(the)h
+(cursor.)150 2384 y Fj(C-d)336 b Fu(Delete)33 b(the)d(c)m(haracter)i
+(underneath)d(the)i(cursor.)150 2550 y(Prin)m(ting)g(c)m(haracters)630
+2660 y(Insert)f(the)g(c)m(haracter)i(in)m(to)g(the)e(line)h(at)g(the)g
+(cursor.)150 2826 y Fj(C-_)e Fu(or)i Fj(C-x)e(C-u)630
+2936 y Fu(Undo)k(the)h(last)g(editing)g(command.)50 b(Y)-8
+b(ou)34 b(can)f(undo)g(all)h(the)f(w)m(a)m(y)i(bac)m(k)f(to)g(an)g
+(empt)m(y)630 3045 y(line.)150 3215 y(\(Dep)s(ending)29
+b(on)h(y)m(our)f(con\014guration,)i(the)e Ft(Backspace)e
+Fu(k)m(ey)k(b)s(e)d(set)j(to)f(delete)h(the)e(c)m(haracter)i(to)g(the)
+150 3324 y(left)37 b(of)f(the)h(cursor)e(and)h(the)g
+Ft(DEL)g Fu(k)m(ey)h(set)f(to)h(delete)h(the)e(c)m(haracter)i
+(underneath)d(the)h(cursor,)i(lik)m(e)150 3434 y Fj(C-d)p
+Fu(,)30 b(rather)g(than)g(the)h(c)m(haracter)h(to)f(the)f(left)h(of)g
+(the)f(cursor.\))150 3640 y Fk(8.2.2)63 b(Readline)40
+b(Mo)m(v)m(emen)m(t)h(Commands)150 3787 y Fu(The)27 b(ab)s(o)m(v)m(e)i
+(table)g(describ)s(es)e(the)g(most)i(basic)f(k)m(eystrok)m(es)h(that)f
+(y)m(ou)g(need)g(in)f(order)g(to)i(do)e(editing)i(of)150
+3897 y(the)k(input)f(line.)49 b(F)-8 b(or)34 b(y)m(our)f(con)m(v)m
+(enience,)j(man)m(y)d(other)g(commands)f(ha)m(v)m(e)j(b)s(een)d(added)g
+(in)h(addition)150 4006 y(to)j Fj(C-b)p Fu(,)f Fj(C-f)p
+Fu(,)g Fj(C-d)p Fu(,)h(and)e Ft(DEL)p Fu(.)54 b(Here)35
+b(are)g(some)h(commands)e(for)h(mo)m(ving)h(more)f(rapidly)f(ab)s(out)h
+(the)150 4116 y(line.)150 4286 y Fj(C-a)336 b Fu(Mo)m(v)m(e)32
+b(to)g(the)e(start)h(of)g(the)f(line.)150 4452 y Fj(C-e)336
+b Fu(Mo)m(v)m(e)32 b(to)g(the)e(end)g(of)g(the)h(line.)150
+4618 y Fj(M-f)336 b Fu(Mo)m(v)m(e)32 b(forw)m(ard)e(a)h(w)m(ord,)f
+(where)g(a)h(w)m(ord)f(is)g(comp)s(osed)g(of)h(letters)h(and)d(digits.)
+150 4785 y Fj(M-b)336 b Fu(Mo)m(v)m(e)32 b(bac)m(kw)m(ard)f(a)g(w)m
+(ord.)150 4951 y Fj(C-l)336 b Fu(Clear)31 b(the)f(screen,)h(reprin)m
+(ting)f(the)h(curren)m(t)f(line)h(at)g(the)f(top.)275
+5121 y(Notice)c(ho)m(w)f Fj(C-f)e Fu(mo)m(v)m(es)j(forw)m(ard)e(a)h(c)m
+(haracter,)j(while)d Fj(M-f)e Fu(mo)m(v)m(es)j(forw)m(ard)e(a)h(w)m
+(ord.)39 b(It)24 b(is)h(a)g(lo)s(ose)150 5230 y(con)m(v)m(en)m(tion)32
+b(that)f(con)m(trol)g(k)m(eystrok)m(es)h(op)s(erate)e(on)g(c)m
+(haracters)h(while)f(meta)h(k)m(eystrok)m(es)h(op)s(erate)e(on)150
+5340 y(w)m(ords.)p eop end
+%%Page: 113 119
+TeXDict begin 113 118 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(113)150 299 y Fk(8.2.3)63
+b(Readline)40 b(Killing)i(Commands)150 446 y Fr(Killing)35
+b Fu(text)28 b(means)e(to)h(delete)h(the)f(text)g(from)g(the)f(line,)i
+(but)e(to)h(sa)m(v)m(e)h(it)g(a)m(w)m(a)m(y)g(for)e(later)i(use,)f
+(usually)150 555 y(b)m(y)g Fr(y)m(anking)35 b Fu(\(re-inserting\))28
+b(it)g(bac)m(k)f(in)m(to)h(the)f(line.)40 b(\(`Cut')27
+b(and)g(`paste')h(are)f(more)g(recen)m(t)h(jargon)f(for)150
+665 y(`kill')32 b(and)d(`y)m(ank'.\))275 801 y(If)g(the)i(description)f
+(for)g(a)h(command)f(sa)m(ys)g(that)h(it)g(`kills')g(text,)h(then)e(y)m
+(ou)g(can)h(b)s(e)e(sure)h(that)h(y)m(ou)150 911 y(can)g(get)g(the)g
+(text)g(bac)m(k)g(in)f(a)h(di\013eren)m(t)g(\(or)g(the)f(same\))h
+(place)h(later.)275 1047 y(When)23 b(y)m(ou)g(use)g(a)h(kill)g
+(command,)g(the)g(text)g(is)f(sa)m(v)m(ed)i(in)e(a)g
+Fr(kill-ring)p Fu(.)39 b(An)m(y)24 b(n)m(um)m(b)s(er)e(of)h(consecutiv)
+m(e)150 1157 y(kills)31 b(sa)m(v)m(e)i(all)f(of)f(the)g(killed)h(text)g
+(together,)g(so)g(that)f(when)f(y)m(ou)h(y)m(ank)h(it)f(bac)m(k,)h(y)m
+(ou)g(get)g(it)f(all.)43 b(The)150 1267 y(kill)33 b(ring)f(is)g(not)h
+(line)g(sp)s(eci\014c;)g(the)g(text)g(that)g(y)m(ou)g(killed)f(on)h(a)f
+(previously)g(t)m(yp)s(ed)h(line)f(is)h(a)m(v)-5 b(ailable)150
+1376 y(to)31 b(b)s(e)f(y)m(ank)m(ed)h(bac)m(k)g(later,)h(when)d(y)m(ou)
+i(are)g(t)m(yping)f(another)h(line.)275 1513 y(Here)f(is)h(the)f(list)h
+(of)g(commands)f(for)g(killing)h(text.)150 1675 y Fj(C-k)336
+b Fu(Kill)31 b(the)f(text)i(from)e(the)g(curren)m(t)g(cursor)g(p)s
+(osition)h(to)g(the)f(end)g(of)g(the)h(line.)150 1836
+y Fj(M-d)336 b Fu(Kill)27 b(from)f(the)g(cursor)g(to)h(the)f(end)g(of)h
+(the)f(curren)m(t)g(w)m(ord,)h(or,)h(if)e(b)s(et)m(w)m(een)h(w)m(ords,)
+g(to)g(the)630 1946 y(end)j(of)g(the)h(next)f(w)m(ord.)41
+b(W)-8 b(ord)30 b(b)s(oundaries)f(are)i(the)g(same)f(as)h(those)g(used)
+f(b)m(y)g Fj(M-f)p Fu(.)150 2107 y Fj(M-DEL)240 b Fu(Kill)31
+b(from)f(the)h(cursor)f(the)g(start)h(of)g(the)g(curren)m(t)f(w)m(ord,)
+h(or,)f(if)h(b)s(et)m(w)m(een)g(w)m(ords,)f(to)i(the)630
+2217 y(start)39 b(of)f(the)h(previous)f(w)m(ord.)64 b(W)-8
+b(ord)39 b(b)s(oundaries)e(are)i(the)f(same)h(as)g(those)f(used)g(b)m
+(y)630 2326 y Fj(M-b)p Fu(.)150 2487 y Fj(C-w)336 b Fu(Kill)35
+b(from)g(the)g(cursor)f(to)i(the)f(previous)g(whitespace.)55
+b(This)34 b(is)h(di\013eren)m(t)h(than)e Fj(M-DEL)630
+2597 y Fu(b)s(ecause)c(the)h(w)m(ord)f(b)s(oundaries)f(di\013er.)275
+2759 y(Here)42 b(is)f(ho)m(w)h(to)g Fr(y)m(ank)47 b Fu(the)42
+b(text)g(bac)m(k)h(in)m(to)f(the)g(line.)74 b(Y)-8 b(anking)43
+b(means)e(to)h(cop)m(y)h(the)e(most-)150 2869 y(recen)m(tly-killed)33
+b(text)e(from)f(the)g(kill)i(bu\013er.)150 3031 y Fj(C-y)336
+b Fu(Y)-8 b(ank)31 b(the)f(most)h(recen)m(tly)h(killed)f(text)g(bac)m
+(k)g(in)m(to)h(the)e(bu\013er)g(at)h(the)f(cursor.)150
+3192 y Fj(M-y)336 b Fu(Rotate)36 b(the)f(kill-ring,)i(and)d(y)m(ank)h
+(the)f(new)g(top.)54 b(Y)-8 b(ou)35 b(can)g(only)f(do)h(this)f(if)h
+(the)g(prior)630 3302 y(command)30 b(is)h Fj(C-y)e Fu(or)h
+Fj(M-y)p Fu(.)150 3503 y Fk(8.2.4)63 b(Readline)40 b(Argumen)m(ts)150
+3650 y Fu(Y)-8 b(ou)40 b(can)f(pass)g(n)m(umeric)f(argumen)m(ts)i(to)f
+(Readline)h(commands.)67 b(Sometimes)39 b(the)g(argumen)m(t)h(acts)150
+3760 y(as)g(a)h(rep)s(eat)f(coun)m(t,)j(other)e(times)f(it)h(is)f(the)g
+Fl(sign)47 b Fu(of)41 b(the)f(argumen)m(t)g(that)h(is)f(signi\014can)m
+(t.)71 b(If)40 b(y)m(ou)150 3869 y(pass)33 b(a)h(negativ)m(e)i(argumen)
+m(t)e(to)g(a)g(command)f(whic)m(h)g(normally)h(acts)g(in)f(a)h(forw)m
+(ard)f(direction,)i(that)150 3979 y(command)g(will)h(act)g(in)f(a)h
+(bac)m(kw)m(ard)f(direction.)57 b(F)-8 b(or)36 b(example,)h(to)f(kill)g
+(text)g(bac)m(k)g(to)g(the)g(start)g(of)150 4088 y(the)31
+b(line,)g(y)m(ou)f(migh)m(t)h(t)m(yp)s(e)g(`)p Ft(M--)f(C-k)p
+Fu('.)275 4225 y(The)d(general)i(w)m(a)m(y)h(to)e(pass)g(n)m(umeric)g
+(argumen)m(ts)h(to)g(a)f(command)g(is)g(to)h(t)m(yp)s(e)f(meta)i
+(digits)e(b)s(efore)150 4334 y(the)j(command.)42 b(If)30
+b(the)h(\014rst)f(`digit')i(t)m(yp)s(ed)f(is)g(a)g(min)m(us)f(sign)h
+(\(`)p Ft(-)p Fu('\),)h(then)f(the)g(sign)f(of)h(the)g(argumen)m(t)150
+4444 y(will)39 b(b)s(e)e(negativ)m(e.)66 b(Once)38 b(y)m(ou)h(ha)m(v)m
+(e)g(t)m(yp)s(ed)f(one)h(meta)g(digit)g(to)f(get)i(the)e(argumen)m(t)h
+(started,)i(y)m(ou)150 4554 y(can)29 b(t)m(yp)s(e)g(the)g(remainder)f
+(of)h(the)g(digits,)h(and)f(then)f(the)h(command.)40
+b(F)-8 b(or)30 b(example,)g(to)f(giv)m(e)i(the)e Fj(C-d)150
+4663 y Fu(command)37 b(an)g(argumen)m(t)h(of)g(10,)i(y)m(ou)e(could)f
+(t)m(yp)s(e)h(`)p Ft(M-1)29 b(0)h(C-d)p Fu(',)39 b(whic)m(h)e(will)h
+(delete)h(the)e(next)h(ten)150 4773 y(c)m(haracters)32
+b(on)e(the)h(input)e(line.)150 4974 y Fk(8.2.5)63 b(Searc)m(hing)40
+b(for)i(Commands)g(in)f(the)g(History)150 5121 y Fu(Readline)35
+b(pro)m(vides)f(commands)g(for)g(searc)m(hing)h(through)e(the)i
+(command)f(history)g(\(see)h(Section)g(9.1)150 5230 y([Bash)i(History)h
+(F)-8 b(acilities],)42 b(page)37 b(146\))i(for)d(lines)h(con)m(taining)
+i(a)e(sp)s(eci\014ed)f(string.)60 b(There)36 b(are)i(t)m(w)m(o)150
+5340 y(searc)m(h)31 b(mo)s(des:)40 b Fr(incremen)m(tal)35
+b Fu(and)30 b Fr(non-incremen)m(tal)p Fu(.)p eop end
+%%Page: 114 120
+TeXDict begin 114 119 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(114)275 299 y(Incremen)m(tal)26
+b(searc)m(hes)h(b)s(egin)e(b)s(efore)g(the)h(user)f(has)h(\014nished)e
+(t)m(yping)i(the)g(searc)m(h)g(string.)39 b(As)26 b(eac)m(h)150
+408 y(c)m(haracter)37 b(of)e(the)h(searc)m(h)g(string)f(is)h(t)m(yp)s
+(ed,)g(Readline)g(displa)m(ys)g(the)f(next)h(en)m(try)g(from)e(the)i
+(history)150 518 y(matc)m(hing)25 b(the)f(string)g(t)m(yp)s(ed)g(so)g
+(far.)39 b(An)23 b(incremen)m(tal)j(searc)m(h)e(requires)g(only)g(as)g
+(man)m(y)g(c)m(haracters)i(as)150 628 y(needed)i(to)i(\014nd)d(the)i
+(desired)f(history)h(en)m(try)-8 b(.)41 b(T)-8 b(o)29
+b(searc)m(h)h(bac)m(kw)m(ard)f(in)f(the)h(history)g(for)f(a)i
+(particular)150 737 y(string,)g(t)m(yp)s(e)f Fj(C-r)p
+Fu(.)40 b(T)m(yping)29 b Fj(C-s)g Fu(searc)m(hes)h(forw)m(ard)f
+(through)g(the)g(history)-8 b(.)41 b(The)29 b(c)m(haracters)i(presen)m
+(t)150 847 y(in)38 b(the)g(v)-5 b(alue)38 b(of)g(the)g
+Ft(isearch-terminators)33 b Fu(v)-5 b(ariable)39 b(are)f(used)f(to)i
+(terminate)g(an)f(incremen)m(tal)150 956 y(searc)m(h.)71
+b(If)40 b(that)h(v)-5 b(ariable)41 b(has)f(not)h(b)s(een)e(assigned)i
+(a)f(v)-5 b(alue,)44 b(the)c Ft(ESC)g Fu(and)f Fj(C-J)h
+Fu(c)m(haracters)i(will)150 1066 y(terminate)h(an)g(incremen)m(tal)g
+(searc)m(h.)78 b Fj(C-g)41 b Fu(will)i(ab)s(ort)f(an)g(incremen)m(tal)i
+(searc)m(h)f(and)f(restore)h(the)150 1176 y(original)30
+b(line.)41 b(When)28 b(the)h(searc)m(h)h(is)f(terminated,)h(the)f
+(history)g(en)m(try)g(con)m(taining)h(the)f(searc)m(h)h(string)150
+1285 y(b)s(ecomes)h(the)f(curren)m(t)g(line.)275 1416
+y(T)-8 b(o)31 b(\014nd)e(other)j(matc)m(hing)g(en)m(tries)g(in)e(the)h
+(history)g(list,)h(t)m(yp)s(e)g Fj(C-r)e Fu(or)h Fj(C-s)f
+Fu(as)h(appropriate.)43 b(This)150 1525 y(will)26 b(searc)m(h)h(bac)m
+(kw)m(ard)g(or)f(forw)m(ard)g(in)f(the)i(history)f(for)g(the)g(next)g
+(en)m(try)h(matc)m(hing)g(the)f(searc)m(h)h(string)150
+1635 y(t)m(yp)s(ed)37 b(so)h(far.)63 b(An)m(y)38 b(other)f(k)m(ey)i
+(sequence)f(b)s(ound)e(to)i(a)g(Readline)h(command)e(will)h(terminate)h
+(the)150 1744 y(searc)m(h)26 b(and)f(execute)i(that)f(command.)39
+b(F)-8 b(or)26 b(instance,)h(a)f Ft(RET)f Fu(will)g(terminate)i(the)f
+(searc)m(h)g(and)e(accept)150 1854 y(the)30 b(line,)g(thereb)m(y)f
+(executing)i(the)e(command)g(from)g(the)h(history)f(list.)41
+b(A)29 b(mo)m(v)m(emen)m(t)j(command)d(will)150 1964
+y(terminate)i(the)g(searc)m(h,)g(mak)m(e)h(the)e(last)h(line)g(found)e
+(the)i(curren)m(t)f(line,)h(and)f(b)s(egin)g(editing.)275
+2094 y(Readline)35 b(remem)m(b)s(ers)f(the)h(last)h(incremen)m(tal)g
+(searc)m(h)f(string.)54 b(If)34 b(t)m(w)m(o)j Fj(C-r)p
+Fu(s)c(are)i(t)m(yp)s(ed)g(without)150 2204 y(an)m(y)i(in)m(terv)m
+(ening)g(c)m(haracters)h(de\014ning)e(a)h(new)f(searc)m(h)h(string,)h
+(an)m(y)f(remem)m(b)s(ered)e(searc)m(h)i(string)g(is)150
+2313 y(used.)275 2444 y(Non-incremen)m(tal)48 b(searc)m(hes)g(read)e
+(the)h(en)m(tire)h(searc)m(h)f(string)g(b)s(efore)f(starting)h(to)h
+(searc)m(h)f(for)150 2553 y(matc)m(hing)d(history)e(lines.)78
+b(The)42 b(searc)m(h)h(string)g(ma)m(y)g(b)s(e)f(t)m(yp)s(ed)g(b)m(y)g
+(the)h(user)f(or)h(b)s(e)f(part)g(of)h(the)150 2663 y(con)m(ten)m(ts)32
+b(of)f(the)f(curren)m(t)g(line.)150 2896 y Fs(8.3)68
+b(Readline)47 b(Init)e(File)150 3055 y Fu(Although)f(the)g(Readline)g
+(library)f(comes)i(with)e(a)h(set)h(of)f(Emacs-lik)m(e)h(k)m
+(eybindings)f(installed)g(b)m(y)150 3165 y(default,)26
+b(it)g(is)e(p)s(ossible)h(to)g(use)f(a)i(di\013eren)m(t)f(set)g(of)g(k)
+m(eybindings.)38 b(An)m(y)25 b(user)f(can)h(customize)h(programs)150
+3274 y(that)45 b(use)f(Readline)h(b)m(y)f(putting)g(commands)g(in)g(an)
+g Fr(inputrc)49 b Fu(\014le,)g(con)m(v)m(en)m(tionally)e(in)d(his)g
+(home)150 3384 y(directory)-8 b(.)59 b(The)35 b(name)i(of)f(this)g
+(\014le)g(is)g(tak)m(en)h(from)f(the)g(v)-5 b(alue)37
+b(of)f(the)g(shell)h(v)-5 b(ariable)36 b Ft(INPUTRC)p
+Fu(.)56 b(If)150 3493 y(that)36 b(v)-5 b(ariable)36 b(is)f(unset,)h
+(the)f(default)h(is)f Ft(~/.inputrc)p Fu(.)52 b(If)35
+b(that)g(\014le)h(do)s(es)e(not)i(exist)g(or)f(cannot)h(b)s(e)150
+3603 y(read,)f(the)f(ultimate)h(default)f(is)g Ft(/etc/inputrc)p
+Fu(.)47 b(The)33 b Ft(bind)g Fu(builtin)g(command)h(can)g(also)h(b)s(e)
+e(used)150 3713 y(to)e(set)g(Readline)g(k)m(eybindings)f(and)g(v)-5
+b(ariables.)41 b(See)31 b(Section)g(4.2)g([Bash)g(Builtins],)g(page)g
+(51.)275 3843 y(When)e(a)h(program)f(whic)m(h)h(uses)f(the)h(Readline)g
+(library)f(starts)h(up,)f(the)h(init)g(\014le)f(is)h(read,)g(and)f(the)
+150 3953 y(k)m(ey)i(bindings)e(are)i(set.)275 4083 y(In)26
+b(addition,)i(the)f Ft(C-x)i(C-r)d Fu(command)h(re-reads)g(this)f(init)
+h(\014le,)h(th)m(us)f(incorp)s(orating)g(an)m(y)g(c)m(hanges)150
+4193 y(that)k(y)m(ou)g(migh)m(t)g(ha)m(v)m(e)g(made)g(to)g(it.)150
+4384 y Fk(8.3.1)63 b(Readline)40 b(Init)h(File)g(Syn)m(tax)150
+4531 y Fu(There)f(are)i(only)f(a)g(few)g(basic)g(constructs)h(allo)m(w)
+m(ed)h(in)d(the)h(Readline)h(init)f(\014le.)73 b(Blank)41
+b(lines)h(are)150 4641 y(ignored.)72 b(Lines)41 b(b)s(eginning)f(with)h
+(a)g(`)p Ft(#)p Fu(')g(are)h(commen)m(ts.)73 b(Lines)41
+b(b)s(eginning)f(with)g(a)i(`)p Ft($)p Fu(')f(indicate)150
+4750 y(conditional)e(constructs)f(\(see)g(Section)h(8.3.2)g
+([Conditional)g(Init)e(Constructs],)j(page)e(122\).)64
+b(Other)150 4860 y(lines)31 b(denote)g(v)-5 b(ariable)31
+b(settings)g(and)f(k)m(ey)h(bindings.)150 5011 y(V)-8
+b(ariable)32 b(Settings)630 5121 y(Y)-8 b(ou)41 b(can)g(mo)s(dify)e
+(the)i(run-time)f(b)s(eha)m(vior)g(of)h(Readline)g(b)m(y)f(altering)h
+(the)g(v)-5 b(alues)41 b(of)630 5230 y(v)-5 b(ariables)34
+b(in)f(Readline)i(using)e(the)g Ft(set)g Fu(command)g(within)g(the)h
+(init)g(\014le.)50 b(The)33 b(syn)m(tax)630 5340 y(is)d(simple:)p
+eop end
+%%Page: 115 121
+TeXDict begin 115 120 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(115)870 299 y Ft(set)47
+b Fj(variable)e(value)630 436 y Fu(Here,)29 b(for)e(example,)h(is)g(ho)
+m(w)f(to)h(c)m(hange)g(from)f(the)g(default)h(Emacs-lik)m(e)h(k)m(ey)f
+(binding)e(to)630 545 y(use)k Ft(vi)g Fu(line)h(editing)g(commands:)870
+682 y Ft(set)47 b(editing-mode)d(vi)630 819 y Fu(V)-8
+b(ariable)36 b(names)f(and)g(v)-5 b(alues,)36 b(where)f(appropriate,)h
+(are)g(recognized)g(without)f(regard)630 929 y(to)c(case.)42
+b(Unrecognized)31 b(v)-5 b(ariable)31 b(names)g(are)f(ignored.)630
+1066 y(Bo)s(olean)c(v)-5 b(ariables)26 b(\(those)g(that)g(can)f(b)s(e)f
+(set)i(to)g(on)f(or)g(o\013)7 b(\))25 b(are)h(set)f(to)h(on)f(if)g(the)
+g(v)-5 b(alue)26 b(is)630 1176 y(n)m(ull)e(or)g(empt)m(y)-8
+b(,)27 b Fr(on)d Fu(\(case-insensitiv)m(e\),)29 b(or)24
+b(1.)39 b(An)m(y)25 b(other)f(v)-5 b(alue)25 b(results)f(in)g(the)g(v)
+-5 b(ariable)630 1285 y(b)s(eing)30 b(set)h(to)g(o\013.)630
+1422 y(The)37 b Ft(bind)30 b(-V)37 b Fu(command)g(lists)i(the)f(curren)
+m(t)f(Readline)i(v)-5 b(ariable)38 b(names)g(and)f(v)-5
+b(alues.)630 1532 y(See)31 b(Section)g(4.2)g([Bash)g(Builtins],)g(page)
+g(51.)630 1669 y(A)f(great)i(deal)f(of)g(run-time)f(b)s(eha)m(vior)g
+(is)g(c)m(hangeable)j(with)d(the)g(follo)m(wing)i(v)-5
+b(ariables.)630 1833 y Ft(bell-style)1110 1943 y Fu(Con)m(trols)44
+b(what)g(happ)s(ens)e(when)h(Readline)i(w)m(an)m(ts)f(to)h(ring)e(the)h
+(termi-)1110 2052 y(nal)37 b(b)s(ell.)61 b(If)37 b(set)h(to)g(`)p
+Ft(none)p Fu(',)g(Readline)g(nev)m(er)g(rings)e(the)i(b)s(ell.)61
+b(If)36 b(set)i(to)1110 2162 y(`)p Ft(visible)p Fu(',)32
+b(Readline)i(uses)f(a)g(visible)g(b)s(ell)g(if)g(one)g(is)g(a)m(v)-5
+b(ailable.)51 b(If)33 b(set)g(to)1110 2271 y(`)p Ft(audible)p
+Fu(')j(\(the)i(default\),)i(Readline)e(attempts)g(to)h(ring)e(the)g
+(terminal's)1110 2381 y(b)s(ell.)630 2545 y Ft(bind-tty-special-chars)
+1110 2655 y Fu(If)e(set)g(to)h(`)p Ft(on)p Fu(')f(\(the)g(default\),)i
+(Readline)f(attempts)g(to)g(bind)d(the)i(con)m(trol)1110
+2765 y(c)m(haracters)30 b(treated)g(sp)s(ecially)g(b)m(y)f(the)g(k)m
+(ernel's)h(terminal)f(driv)m(er)g(to)h(their)1110 2874
+y(Readline)h(equiv)-5 b(alen)m(ts.)630 3039 y Ft(blink-matching-paren)
+1110 3148 y Fu(If)36 b(set)g(to)h(`)p Ft(on)p Fu(',)h(Readline)f
+(attempts)g(to)g(brie\015y)e(mo)m(v)m(e)j(the)f(cursor)e(to)i(an)1110
+3258 y(op)s(ening)k(paren)m(thesis)h(when)f(a)h(closing)h(paren)m
+(thesis)e(is)h(inserted.)74 b(The)1110 3367 y(default)31
+b(is)f(`)p Ft(off)p Fu('.)630 3532 y Ft(colored-completion-prefi)o(x)
+1110 3641 y Fu(If)f(set)h(to)g(`)p Ft(on)p Fu(',)g(when)e(listing)i
+(completions,)h(Readline)f(displa)m(ys)g(the)f(com-)1110
+3751 y(mon)c(pre\014x)f(of)i(the)f(set)h(of)g(p)s(ossible)f
+(completions)h(using)f(a)h(di\013eren)m(t)g(color.)1110
+3861 y(The)39 b(color)i(de\014nitions)f(are)g(tak)m(en)h(from)f(the)g
+(v)-5 b(alue)40 b(of)g(the)g Ft(LS_COLORS)1110 3970 y
+Fu(en)m(vironmen)m(t)31 b(v)-5 b(ariable.)41 b(The)30
+b(default)h(is)f(`)p Ft(off)p Fu('.)630 4134 y Ft(colored-stats)1110
+4244 y Fu(If)c(set)h(to)g(`)p Ft(on)p Fu(',)h(Readline)f(displa)m(ys)g
+(p)s(ossible)f(completions)h(using)f(di\013eren)m(t)1110
+4354 y(colors)40 b(to)g(indicate)g(their)f(\014le)h(t)m(yp)s(e.)67
+b(The)38 b(color)j(de\014nitions)d(are)i(tak)m(en)1110
+4463 y(from)24 b(the)h(v)-5 b(alue)25 b(of)g(the)g Ft(LS_COLORS)d
+Fu(en)m(vironmen)m(t)j(v)-5 b(ariable.)40 b(The)24 b(default)1110
+4573 y(is)30 b(`)p Ft(off)p Fu('.)630 4737 y Ft(comment-begin)1110
+4847 y Fu(The)62 b(string)g(to)h(insert)f(at)h(the)g(b)s(eginning)e(of)
+h(the)h(line)f(when)g(the)1110 4956 y Ft(insert-comment)26
+b Fu(command)31 b(is)f(executed.)42 b(The)30 b(default)g(v)-5
+b(alue)31 b(is)f Ft("#")p Fu(.)630 5121 y Ft(completion-display-width)
+1110 5230 y Fu(The)41 b(n)m(um)m(b)s(er)f(of)i(screen)g(columns)f(used)
+g(to)h(displa)m(y)g(p)s(ossible)f(matc)m(hes)1110 5340
+y(when)28 b(p)s(erforming)g(completion.)41 b(The)29 b(v)-5
+b(alue)29 b(is)g(ignored)g(if)g(it)h(is)f(less)g(than)p
+eop end
+%%Page: 116 122
+TeXDict begin 116 121 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(116)1110 299 y(0)27
+b(or)f(greater)h(than)f(the)g(terminal)h(screen)f(width.)39
+b(A)26 b(v)-5 b(alue)27 b(of)f(0)h(will)f(cause)1110
+408 y(matc)m(hes)32 b(to)f(b)s(e)e(displa)m(y)m(ed)i(one)g(p)s(er)e
+(line.)41 b(The)30 b(default)h(v)-5 b(alue)31 b(is)f(-1.)630
+587 y Ft(completion-ignore-case)1110 696 y Fu(If)d(set)h(to)g(`)p
+Ft(on)p Fu(',)g(Readline)g(p)s(erforms)e(\014lename)h(matc)m(hing)i
+(and)e(completion)1110 806 y(in)j(a)h(case-insensitiv)m(e)i(fashion.)40
+b(The)30 b(default)h(v)-5 b(alue)30 b(is)h(`)p Ft(off)p
+Fu('.)630 984 y Ft(completion-map-case)1110 1093 y Fu(If)22
+b(set)g(to)h(`)p Ft(on)p Fu(',)h(and)e Fr(completion-ignore-case)31
+b Fu(is)22 b(enabled,)i(Readline)f(treats)1110 1203 y(h)m(yphens)29
+b(\(`)p Ft(-)p Fu('\))j(and)e(underscores)g(\(`)p Ft(_)p
+Fu('\))i(as)f(equiv)-5 b(alen)m(t)32 b(when)e(p)s(erforming)1110
+1313 y(case-insensitiv)m(e)47 b(\014lename)e(matc)m(hing)g(and)f
+(completion.)85 b(The)44 b(default)1110 1422 y(v)-5 b(alue)31
+b(is)f(`)p Ft(off)p Fu('.)630 1600 y Ft(completion-prefix-displa)o
+(y-le)o(ngth)1110 1710 y Fu(The)h(length)g(in)g(c)m(haracters)i(of)f
+(the)f(common)h(pre\014x)e(of)h(a)h(list)g(of)f(p)s(ossible)1110
+1819 y(completions)g(that)f(is)g(displa)m(y)m(ed)g(without)g(mo)s
+(di\014cation.)41 b(When)29 b(set)h(to)h(a)1110 1929
+y(v)-5 b(alue)26 b(greater)h(than)e(zero,)j(common)e(pre\014xes)e
+(longer)j(than)e(this)g(v)-5 b(alue)27 b(are)1110 2039
+y(replaced)k(with)f(an)g(ellipsis)h(when)e(displa)m(ying)i(p)s(ossible)
+f(completions.)630 2217 y Ft(completion-query-items)1110
+2326 y Fu(The)c(n)m(um)m(b)s(er)f(of)h(p)s(ossible)g(completions)h
+(that)g(determines)f(when)f(the)i(user)1110 2436 y(is)43
+b(ask)m(ed)g(whether)f(the)g(list)h(of)g(p)s(ossibilities)g(should)f(b)
+s(e)g(displa)m(y)m(ed.)77 b(If)1110 2545 y(the)29 b(n)m(um)m(b)s(er)f
+(of)h(p)s(ossible)g(completions)h(is)f(greater)h(than)f(or)g(equal)g
+(to)h(this)1110 2655 y(v)-5 b(alue,)45 b(Readline)e(will)f(ask)g
+(whether)f(or)h(not)g(the)g(user)f(wishes)g(to)i(view)1110
+2765 y(them;)33 b(otherwise,)f(they)g(are)g(simply)g(listed.)45
+b(This)31 b(v)-5 b(ariable)33 b(m)m(ust)e(b)s(e)g(set)1110
+2874 y(to)39 b(an)f(in)m(teger)i(v)-5 b(alue)39 b(greater)g(than)f(or)h
+(equal)g(to)g(0.)65 b(A)38 b(negativ)m(e)i(v)-5 b(alue)1110
+2984 y(means)30 b(Readline)h(should)f(nev)m(er)g(ask.)41
+b(The)30 b(default)h(limit)g(is)f Ft(100)p Fu(.)630 3162
+y Ft(convert-meta)1110 3271 y Fu(If)22 b(set)g(to)h(`)p
+Ft(on)p Fu(',)h(Readline)f(will)f(con)m(v)m(ert)i(c)m(haracters)f(with)
+f(the)g(eigh)m(th)h(bit)f(set)1110 3381 y(to)33 b(an)e
+Fm(asci)r(i)h Fu(k)m(ey)h(sequence)f(b)m(y)g(stripping)f(the)h(eigh)m
+(th)h(bit)f(and)f(pre\014xing)1110 3491 y(an)24 b Ft(ESC)g
+Fu(c)m(haracter,)j(con)m(v)m(erting)f(them)f(to)g(a)g(meta-pre\014xed)f
+(k)m(ey)h(sequence.)1110 3600 y(The)i(default)h(v)-5
+b(alue)28 b(is)f(`)p Ft(on)p Fu(',)i(but)d(will)i(b)s(e)f(set)h(to)g(`)
+p Ft(off)p Fu(')g(if)f(the)h(lo)s(cale)h(is)f(one)1110
+3710 y(that)j(con)m(tains)h(eigh)m(t-bit)g(c)m(haracters.)630
+3888 y Ft(disable-completion)1110 3998 y Fu(If)k(set)h(to)h(`)p
+Ft(On)p Fu(',)g(Readline)f(will)g(inhibit)f(w)m(ord)h(completion.)60
+b(Completion)1110 4107 y(c)m(haracters)28 b(will)e(b)s(e)f(inserted)h
+(in)m(to)h(the)g(line)f(as)g(if)g(they)h(had)e(b)s(een)g(mapp)s(ed)1110
+4217 y(to)31 b Ft(self-insert)p Fu(.)38 b(The)30 b(default)g(is)h(`)p
+Ft(off)p Fu('.)630 4395 y Ft(echo-control-characters)1110
+4504 y Fu(When)f(set)h(to)g(`)p Ft(on)p Fu(',)f(on)g(op)s(erating)h
+(systems)f(that)h(indicate)g(they)g(supp)s(ort)1110 4614
+y(it,)i(readline)e(ec)m(ho)s(es)i(a)f(c)m(haracter)h(corresp)s(onding)d
+(to)j(a)f(signal)g(generated)1110 4724 y(from)e(the)g(k)m(eyb)s(oard.)
+41 b(The)30 b(default)g(is)h(`)p Ft(on)p Fu('.)630 4902
+y Ft(editing-mode)1110 5011 y Fu(The)d Ft(editing-mode)e
+Fu(v)-5 b(ariable)29 b(con)m(trols)h(whic)m(h)e(default)h(set)h(of)e(k)
+m(ey)i(bind-)1110 5121 y(ings)25 b(is)g(used.)38 b(By)26
+b(default,)g(Readline)g(starts)f(up)f(in)h(Emacs)g(editing)h(mo)s(de,)
+1110 5230 y(where)j(the)g(k)m(eystrok)m(es)i(are)e(most)h(similar)f(to)
+h(Emacs.)40 b(This)29 b(v)-5 b(ariable)30 b(can)1110
+5340 y(b)s(e)g(set)h(to)g(either)g(`)p Ft(emacs)p Fu(')e(or)h(`)p
+Ft(vi)p Fu('.)p eop end
+%%Page: 117 123
+TeXDict begin 117 122 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(117)630 299 y Ft
+(emacs-mode-string)1110 408 y Fu(If)33 b(the)h Fr(sho)m(w-mo)s
+(de-in-prompt)h Fu(v)-5 b(ariable)35 b(is)e(enabled,)i(this)f(string)f
+(is)h(dis-)1110 518 y(pla)m(y)m(ed)24 b(immediately)g(b)s(efore)f(the)g
+(last)h(line)f(of)h(the)f(primary)f(prompt)g(when)1110
+628 y(emacs)g(editing)h(mo)s(de)e(is)h(activ)m(e.)40
+b(The)21 b(v)-5 b(alue)22 b(is)g(expanded)f(lik)m(e)h(a)h(k)m(ey)f
+(bind-)1110 737 y(ing,)27 b(so)f(the)f(standard)g(set)h(of)f(meta-)i
+(and)e(con)m(trol)i(pre\014xes)d(and)h(bac)m(kslash)1110
+847 y(escap)s(e)f(sequences)h(is)e(a)m(v)-5 b(ailable.)41
+b(Use)25 b(the)f(`)p Ft(\\1)p Fu(')f(and)h(`)p Ft(\\2)p
+Fu(')g(escap)s(es)g(to)g(b)s(egin)1110 956 y(and)37 b(end)g(sequences)h
+(of)f(non-prin)m(ting)h(c)m(haracters,)j(whic)m(h)c(can)h(b)s(e)f(used)
+1110 1066 y(to)h(em)m(b)s(ed)f(a)g(terminal)h(con)m(trol)h(sequence)f
+(in)m(to)g(the)f(mo)s(de)g(string.)61 b(The)1110 1176
+y(default)31 b(is)f(`)p Ft(@)p Fu('.)630 1332 y Ft
+(enable-bracketed-paste)1110 1442 y Fu(When)24 b(set)h(to)h(`)p
+Ft(On)p Fu(',)g(Readline)f(will)g(con\014gure)f(the)h(terminal)g(in)f
+(a)h(w)m(a)m(y)g(that)1110 1551 y(will)k(enable)f(it)h(to)g(insert)g
+(eac)m(h)g(paste)g(in)m(to)g(the)g(editing)g(bu\013er)e(as)i(a)f
+(single)1110 1661 y(string)33 b(of)f(c)m(haracters,)j(instead)e(of)g
+(treating)h(eac)m(h)g(c)m(haracter)g(as)f(if)f(it)i(had)1110
+1771 y(b)s(een)e(read)i(from)e(the)i(k)m(eyb)s(oard.)49
+b(This)32 b(can)h(prev)m(en)m(t)h(pasted)f(c)m(haracters)1110
+1880 y(from)d(b)s(eing)g(in)m(terpreted)h(as)f(editing)h(commands.)41
+b(The)29 b(default)i(is)f(`)p Ft(On)p Fu('.)630 2037
+y Ft(enable-keypad)1110 2146 y Fu(When)23 b(set)h(to)g(`)p
+Ft(on)p Fu(',)h(Readline)f(will)g(try)f(to)h(enable)g(the)f
+(application)i(k)m(eypad)1110 2256 y(when)h(it)h(is)f(called.)41
+b(Some)27 b(systems)f(need)h(this)f(to)h(enable)g(the)g(arro)m(w)g(k)m
+(eys.)1110 2365 y(The)j(default)g(is)h(`)p Ft(off)p Fu('.)630
+2522 y Ft(enable-meta-key)1110 2632 y Fu(When)40 b(set)g(to)g(`)p
+Ft(on)p Fu(',)j(Readline)d(will)g(try)g(to)g(enable)g(an)m(y)g(meta)h
+(mo)s(di\014er)1110 2741 y(k)m(ey)i(the)e(terminal)i(claims)f(to)h
+(supp)s(ort)d(when)h(it)h(is)g(called.)76 b(On)41 b(man)m(y)1110
+2851 y(terminals,)c(the)e(meta)h(k)m(ey)g(is)f(used)g(to)h(send)e(eigh)
+m(t-bit)j(c)m(haracters.)56 b(The)1110 2960 y(default)31
+b(is)f(`)p Ft(on)p Fu('.)630 3117 y Ft(expand-tilde)1110
+3226 y Fu(If)d(set)h(to)h(`)p Ft(on)p Fu(',)f(tilde)g(expansion)g(is)f
+(p)s(erformed)f(when)h(Readline)h(attempts)1110 3336
+y(w)m(ord)i(completion.)42 b(The)30 b(default)g(is)h(`)p
+Ft(off)p Fu('.)630 3493 y Ft(history-preserve-point)1110
+3602 y Fu(If)41 b(set)h(to)h(`)p Ft(on)p Fu(',)i(the)c(history)h(co)s
+(de)g(attempts)h(to)f(place)h(the)f(p)s(oin)m(t)f(\(the)1110
+3712 y(curren)m(t)35 b(cursor)g(p)s(osition\))g(at)h(the)g(same)f(lo)s
+(cation)i(on)e(eac)m(h)h(history)g(line)1110 3821 y(retriev)m(ed)h
+(with)f Ft(previous-history)c Fu(or)37 b Ft(next-history)p
+Fu(.)55 b(The)36 b(default)1110 3931 y(is)30 b(`)p Ft(off)p
+Fu('.)630 4088 y Ft(history-size)1110 4197 y Fu(Set)39
+b(the)g(maxim)m(um)g(n)m(um)m(b)s(er)f(of)h(history)g(en)m(tries)h(sa)m
+(v)m(ed)g(in)f(the)g(history)1110 4307 y(list.)51 b(If)34
+b(set)g(to)h(zero,)g(an)m(y)f(existing)h(history)f(en)m(tries)g(are)g
+(deleted)h(and)e(no)1110 4416 y(new)e(en)m(tries)i(are)f(sa)m(v)m(ed.)
+46 b(If)31 b(set)h(to)h(a)f(v)-5 b(alue)32 b(less)g(than)f(zero,)i(the)
+f(n)m(um)m(b)s(er)1110 4526 y(of)f(history)f(en)m(tries)h(is)g(not)g
+(limited.)42 b(By)30 b(default,)h(the)g(n)m(um)m(b)s(er)e(of)i(history)
+1110 4635 y(en)m(tries)j(is)f(not)g(limited.)49 b(If)32
+b(an)h(attempt)h(is)f(made)g(to)h(set)f Fr(history-size)39
+b Fu(to)1110 4745 y(a)34 b(non-n)m(umeric)f(v)-5 b(alue,)34
+b(the)g(maxim)m(um)f(n)m(um)m(b)s(er)f(of)h(history)h(en)m(tries)g
+(will)1110 4855 y(b)s(e)c(set)h(to)g(500.)630 5011 y
+Ft(horizontal-scroll-mode)1110 5121 y Fu(This)k(v)-5
+b(ariable)37 b(can)f(b)s(e)f(set)h(to)h(either)f(`)p
+Ft(on)p Fu(')g(or)g(`)p Ft(off)p Fu('.)57 b(Setting)36
+b(it)g(to)h(`)p Ft(on)p Fu(')1110 5230 y(means)26 b(that)h(the)f(text)h
+(of)g(the)f(lines)g(b)s(eing)g(edited)h(will)f(scroll)h(horizon)m
+(tally)1110 5340 y(on)32 b(a)g(single)g(screen)g(line)g(when)e(they)i
+(are)g(longer)h(than)e(the)h(width)f(of)h(the)p eop end
+%%Page: 118 124
+TeXDict begin 118 123 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(118)1110 299 y(screen,)28
+b(instead)g(of)f(wrapping)f(on)m(to)i(a)g(new)e(screen)i(line.)40
+b(This)26 b(v)-5 b(ariable)28 b(is)1110 408 y(automatically)k(set)e(to)
+g(`)p Ft(on)p Fu(')f(for)g(terminals)g(of)h(heigh)m(t)g(1.)41
+b(By)29 b(default,)h(this)1110 518 y(v)-5 b(ariable)31
+b(is)g(set)f(to)i(`)p Ft(off)p Fu('.)630 719 y Ft(input-meta)1110
+829 y Fu(If)f(set)g(to)h(`)p Ft(on)p Fu(',)g(Readline)g(will)f(enable)h
+(eigh)m(t-bit)h(input)d(\(it)i(will)f(not)h(clear)1110
+938 y(the)40 b(eigh)m(th)g(bit)g(in)f(the)h(c)m(haracters)h(it)f
+(reads\),)j(regardless)c(of)h(what)g(the)1110 1048 y(terminal)k(claims)
+h(it)f(can)g(supp)s(ort.)79 b(The)44 b(default)g(v)-5
+b(alue)44 b(is)g(`)p Ft(off)p Fu(',)j(but)1110 1157 y(Readline)24
+b(will)h(set)f(it)g(to)h(`)p Ft(on)p Fu(')e(if)h(the)g(lo)s(cale)i(con)
+m(tains)f(eigh)m(t-bit)g(c)m(haracters.)1110 1267 y(The)30
+b(name)g Ft(meta-flag)e Fu(is)j(a)f(synon)m(ym)g(for)g(this)h(v)-5
+b(ariable.)630 1468 y Ft(isearch-terminators)1110 1577
+y Fu(The)51 b(string)h(of)g(c)m(haracters)h(that)f(should)e(terminate)j
+(an)f(incremen)m(tal)1110 1687 y(searc)m(h)25 b(without)g(subsequen)m
+(tly)g(executing)h(the)f(c)m(haracter)h(as)f(a)g(command)1110
+1797 y(\(see)38 b(Section)g(8.2.5)h([Searc)m(hing],)h(page)e(113\).)62
+b(If)37 b(this)g(v)-5 b(ariable)38 b(has)f(not)1110 1906
+y(b)s(een)e(giv)m(en)h(a)g(v)-5 b(alue,)37 b(the)f(c)m(haracters)h
+Ft(ESC)d Fu(and)h Fj(C-J)g Fu(will)h(terminate)g(an)1110
+2016 y(incremen)m(tal)c(searc)m(h.)630 2217 y Ft(keymap)192
+b Fu(Sets)64 b(Readline's)i(idea)f(of)f(the)h(curren)m(t)f(k)m(eymap)h
+(for)f(k)m(ey)h(binding)1110 2326 y(commands.)71 b(Built-in)41
+b Ft(keymap)e Fu(names)h(are)h Ft(emacs)p Fu(,)h Ft(emacs-standard)p
+Fu(,)1110 2436 y Ft(emacs-meta)p Fu(,)99 b Ft(emacs-ctlx)p
+Fu(,)f Ft(vi)p Fu(,)j Ft(vi-move)p Fu(,)f Ft(vi-command)p
+Fu(,)f(and)1110 2545 y Ft(vi-insert)p Fu(.)81 b Ft(vi)44
+b Fu(is)h(equiv)-5 b(alen)m(t)46 b(to)g Ft(vi-command)c
+Fu(\()p Ft(vi-move)h Fu(is)i(also)h(a)1110 2655 y(synon)m(ym\);)41
+b Ft(emacs)c Fu(is)h(equiv)-5 b(alen)m(t)39 b(to)f Ft(emacs-standard)p
+Fu(.)59 b(Applications)1110 2765 y(ma)m(y)32 b(add)e(additional)i
+(names.)43 b(The)30 b(default)h(v)-5 b(alue)32 b(is)f
+Ft(emacs)p Fu(.)41 b(The)30 b(v)-5 b(alue)1110 2874 y(of)31
+b(the)f Ft(editing-mode)d Fu(v)-5 b(ariable)31 b(also)h(a\013ects)f
+(the)g(default)g(k)m(eymap.)630 3075 y Ft(keyseq-timeout)1110
+3185 y Fu(Sp)s(eci\014es)25 b(the)g(duration)g(Readline)h(will)g(w)m
+(ait)g(for)g(a)f(c)m(haracter)i(when)e(read-)1110 3294
+y(ing)30 b(an)g(am)m(biguous)g(k)m(ey)h(sequence)f(\(one)g(that)h(can)f
+(form)g(a)g(complete)h(k)m(ey)1110 3404 y(sequence)j(using)e(the)i
+(input)e(read)h(so)g(far,)h(or)g(can)f(tak)m(e)i(additional)f(input)
+1110 3513 y(to)g(complete)g(a)f(longer)h(k)m(ey)f(sequence\).)49
+b(If)33 b(no)f(input)g(is)h(receiv)m(ed)h(within)1110
+3623 y(the)43 b(timeout,)48 b(Readline)43 b(will)g(use)g(the)g(shorter)
+g(but)f(complete)j(k)m(ey)e(se-)1110 3733 y(quence.)c(Readline)26
+b(uses)f(this)h(v)-5 b(alue)26 b(to)g(determine)g(whether)f(or)g(not)h
+(input)1110 3842 y(is)31 b(a)m(v)-5 b(ailable)33 b(on)d(the)h(curren)m
+(t)f(input)g(source)h(\()p Ft(rl_instream)d Fu(b)m(y)i(default\).)1110
+3952 y(The)25 b(v)-5 b(alue)26 b(is)f(sp)s(eci\014ed)f(in)h
+(milliseconds,)j(so)d(a)h(v)-5 b(alue)26 b(of)f(1000)i(means)e(that)
+1110 4061 y(Readline)e(will)g(w)m(ait)g(one)g(second)f(for)g
+(additional)i(input.)37 b(If)22 b(this)g(v)-5 b(ariable)23
+b(is)1110 4171 y(set)28 b(to)h(a)f(v)-5 b(alue)29 b(less)f(than)g(or)f
+(equal)i(to)f(zero,)i(or)e(to)g(a)h(non-n)m(umeric)e(v)-5
+b(alue,)1110 4281 y(Readline)30 b(will)f(w)m(ait)i(un)m(til)e(another)h
+(k)m(ey)g(is)f(pressed)g(to)h(decide)f(whic)m(h)g(k)m(ey)1110
+4390 y(sequence)i(to)g(complete.)42 b(The)30 b(default)g(v)-5
+b(alue)31 b(is)g Ft(500)p Fu(.)630 4591 y Ft(mark-directories)1110
+4701 y Fu(If)38 b(set)g(to)h(`)p Ft(on)p Fu(',)i(completed)e(directory)
+f(names)g(ha)m(v)m(e)i(a)e(slash)g(app)s(ended.)1110
+4810 y(The)30 b(default)g(is)h(`)p Ft(on)p Fu('.)630
+5011 y Ft(mark-modified-lines)1110 5121 y Fu(This)k(v)-5
+b(ariable,)38 b(when)d(set)h(to)h(`)p Ft(on)p Fu(',)g(causes)g
+(Readline)f(to)h(displa)m(y)f(an)f(as-)1110 5230 y(terisk)f(\(`)p
+Ft(*)p Fu('\))h(at)f(the)g(start)g(of)g(history)g(lines)g(whic)m(h)f
+(ha)m(v)m(e)i(b)s(een)e(mo)s(di\014ed.)1110 5340 y(This)d(v)-5
+b(ariable)31 b(is)f(`)p Ft(off)p Fu(')g(b)m(y)g(default.)p
+eop end
+%%Page: 119 125
+TeXDict begin 119 124 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(119)630 299 y Ft
+(mark-symlinked-directori)o(es)1110 408 y Fu(If)59 b(set)h(to)g(`)p
+Ft(on)p Fu(',)67 b(completed)60 b(names)f(whic)m(h)g(are)h(sym)m(b)s
+(olic)g(links)f(to)1110 518 y(directories)71 b(ha)m(v)m(e)f(a)g(slash)f
+(app)s(ended)f(\(sub)5 b(ject)70 b(to)g(the)g(v)-5 b(alue)70
+b(of)1110 628 y Ft(mark-directories)p Fu(\).)37 b(The)30
+b(default)g(is)g(`)p Ft(off)p Fu('.)630 778 y Ft(match-hidden-files)
+1110 888 y Fu(This)21 b(v)-5 b(ariable,)25 b(when)d(set)g(to)h(`)p
+Ft(on)p Fu(',)h(causes)f(Readline)g(to)g(matc)m(h)g(\014les)f(whose)
+1110 998 y(names)44 b(b)s(egin)g(with)g(a)g(`)p Ft(.)p
+Fu(')g(\(hidden)f(\014les\))i(when)e(p)s(erforming)g(\014lename)1110
+1107 y(completion.)75 b(If)41 b(set)g(to)h(`)p Ft(off)p
+Fu(',)i(the)e(leading)g(`)p Ft(.)p Fu(')f(m)m(ust)g(b)s(e)g(supplied)f
+(b)m(y)1110 1217 y(the)34 b(user)g(in)g(the)g(\014lename)g(to)h(b)s(e)f
+(completed.)53 b(This)33 b(v)-5 b(ariable)35 b(is)f(`)p
+Ft(on)p Fu(')g(b)m(y)1110 1326 y(default.)630 1477 y
+Ft(menu-complete-display-pr)o(efix)1110 1587 y Fu(If)f(set)h(to)g(`)p
+Ft(on)p Fu(',)h(men)m(u)e(completion)i(displa)m(ys)e(the)h(common)g
+(pre\014x)e(of)i(the)1110 1696 y(list)k(of)g(p)s(ossible)f(completions)
+i(\(whic)m(h)e(ma)m(y)h(b)s(e)f(empt)m(y\))i(b)s(efore)e(cycling)1110
+1806 y(through)30 b(the)g(list.)42 b(The)29 b(default)i(is)f(`)p
+Ft(off)p Fu('.)630 1956 y Ft(output-meta)1110 2066 y
+Fu(If)35 b(set)h(to)g(`)p Ft(on)p Fu(',)h(Readline)f(will)g(displa)m(y)
+f(c)m(haracters)i(with)e(the)h(eigh)m(th)g(bit)1110 2176
+y(set)h(directly)g(rather)f(than)g(as)h(a)g(meta-pre\014xed)f(escap)s
+(e)h(sequence.)59 b(The)1110 2285 y(default)26 b(is)f(`)p
+Ft(off)p Fu(',)i(but)e(Readline)h(will)g(set)g(it)g(to)h(`)p
+Ft(on)p Fu(')e(if)h(the)f(lo)s(cale)j(con)m(tains)1110
+2395 y(eigh)m(t-bit)k(c)m(haracters.)630 2545 y Ft(page-completions)
+1110 2655 y Fu(If)h(set)i(to)f(`)p Ft(on)p Fu(',)h(Readline)g(uses)e
+(an)h(in)m(ternal)h Ft(more)p Fu(-lik)m(e)f(pager)g(to)h(displa)m(y)
+1110 2765 y(a)e(screenful)f(of)g(p)s(ossible)g(completions)i(at)f(a)g
+(time.)47 b(This)31 b(v)-5 b(ariable)34 b(is)e(`)p Ft(on)p
+Fu(')1110 2874 y(b)m(y)e(default.)630 3025 y Ft
+(print-completions-horizo)o(ntal)o(ly)1110 3134 y Fu(If)23
+b(set)i(to)g(`)p Ft(on)p Fu(',)g(Readline)g(will)f(displa)m(y)g
+(completions)h(with)f(matc)m(hes)h(sorted)1110 3244 y(horizon)m(tally)
+45 b(in)e(alphab)s(etical)i(order,)i(rather)c(than)g(do)m(wn)g(the)h
+(screen.)1110 3354 y(The)30 b(default)g(is)h(`)p Ft(off)p
+Fu('.)630 3504 y Ft(revert-all-at-newline)1110 3614 y
+Fu(If)e(set)h(to)g(`)p Ft(on)p Fu(',)g(Readline)g(will)g(undo)f(all)h
+(c)m(hanges)h(to)f(history)g(lines)f(b)s(efore)1110 3724
+y(returning)f(when)f Ft(accept-line)f Fu(is)j(executed.)41
+b(By)29 b(default,)g(history)g(lines)1110 3833 y(ma)m(y)42
+b(b)s(e)g(mo)s(di\014ed)e(and)h(retain)i(individual)e(undo)g(lists)h
+(across)g(calls)h(to)1110 3943 y Ft(readline)p Fu(.)38
+b(The)30 b(default)h(is)f(`)p Ft(off)p Fu('.)630 4093
+y Ft(show-all-if-ambiguous)1110 4203 y Fu(This)f(alters)i(the)f
+(default)g(b)s(eha)m(vior)g(of)g(the)h(completion)g(functions.)40
+b(If)29 b(set)1110 4313 y(to)f(`)p Ft(on)p Fu(',)g(w)m(ords)f(whic)m(h)
+g(ha)m(v)m(e)i(more)f(than)f(one)h(p)s(ossible)f(completion)h(cause)
+1110 4422 y(the)39 b(matc)m(hes)h(to)g(b)s(e)e(listed)h(immediately)i
+(instead)e(of)g(ringing)g(the)g(b)s(ell.)1110 4532 y(The)30
+b(default)g(v)-5 b(alue)31 b(is)g(`)p Ft(off)p Fu('.)630
+4682 y Ft(show-all-if-unmodified)1110 4792 y Fu(This)38
+b(alters)h(the)g(default)g(b)s(eha)m(vior)g(of)f(the)h(completion)h
+(functions)e(in)h(a)1110 4902 y(fashion)25 b(similar)h(to)g
+Fr(sho)m(w-all-if-am)m(biguous)p Fu(.)41 b(If)25 b(set)h(to)h(`)p
+Ft(on)p Fu(',)f(w)m(ords)f(whic)m(h)1110 5011 y(ha)m(v)m(e)32
+b(more)f(than)f(one)i(p)s(ossible)e(completion)i(without)f(an)m(y)g(p)s
+(ossible)f(par-)1110 5121 y(tial)43 b(completion)h(\(the)f(p)s(ossible)
+f(completions)h(don't)f(share)g(a)h(common)1110 5230
+y(pre\014x\))30 b(cause)g(the)h(matc)m(hes)g(to)g(b)s(e)f(listed)g
+(immediately)i(instead)e(of)h(ring-)1110 5340 y(ing)g(the)f(b)s(ell.)41
+b(The)30 b(default)g(v)-5 b(alue)31 b(is)f(`)p Ft(off)p
+Fu('.)p eop end
+%%Page: 120 126
+TeXDict begin 120 125 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(120)630 299 y Ft
+(show-mode-in-prompt)1110 408 y Fu(If)24 b(set)h(to)g(`)p
+Ft(on)p Fu(',)g(add)f(a)h(string)f(to)h(the)f(b)s(eginning)g(of)g(the)h
+(prompt)e(indicating)1110 518 y(the)33 b(editing)h(mo)s(de:)46
+b(emacs,)35 b(vi)e(command,)h(or)f(vi)h(insertion.)49
+b(The)32 b(mo)s(de)1110 628 y(strings)45 b(are)h(user-settable)g
+(\(e.g.,)51 b Fr(emacs-mo)s(de-string)8 b Fu(\).)87 b(The)45
+b(default)1110 737 y(v)-5 b(alue)31 b(is)f(`)p Ft(off)p
+Fu('.)630 887 y Ft(skip-completed-text)1110 996 y Fu(If)i(set)i(to)f(`)
+p Ft(on)p Fu(',)h(this)f(alters)g(the)g(default)g(completion)h(b)s(eha)
+m(vior)f(when)f(in-)1110 1106 y(serting)d(a)h(single)g(matc)m(h)f(in)m
+(to)h(the)g(line.)40 b(It's)30 b(only)f(activ)m(e)i(when)d(p)s(erform-)
+1110 1215 y(ing)35 b(completion)h(in)e(the)h(middle)f(of)h(a)f(w)m
+(ord.)53 b(If)35 b(enabled,)g(readline)g(do)s(es)1110
+1325 y(not)41 b(insert)f(c)m(haracters)i(from)e(the)h(completion)h
+(that)f(matc)m(h)g(c)m(haracters)1110 1435 y(after)c(p)s(oin)m(t)g(in)g
+(the)g(w)m(ord)f(b)s(eing)g(completed,)k(so)d(p)s(ortions)f(of)h(the)g
+(w)m(ord)1110 1544 y(follo)m(wing)c(the)f(cursor)f(are)h(not)g
+(duplicated.)45 b(F)-8 b(or)32 b(instance,)h(if)f(this)f(is)h(en-)1110
+1654 y(abled,)43 b(attempting)f(completion)g(when)d(the)i(cursor)f(is)g
+(after)h(the)g(`)p Ft(e)p Fu(')f(in)1110 1763 y(`)p Ft(Makefile)p
+Fu(')c(will)i(result)f(in)g(`)p Ft(Makefile)p Fu(')f(rather)h(than)h(`)
+p Ft(Makefilefile)p Fu(',)1110 1873 y(assuming)d(there)g(is)h(a)f
+(single)h(p)s(ossible)f(completion.)56 b(The)35 b(default)g(v)-5
+b(alue)1110 1983 y(is)30 b(`)p Ft(off)p Fu('.)630 2132
+y Ft(vi-cmd-mode-string)1110 2242 y Fu(If)j(the)h Fr(sho)m(w-mo)s
+(de-in-prompt)h Fu(v)-5 b(ariable)35 b(is)e(enabled,)i(this)f(string)f
+(is)h(dis-)1110 2351 y(pla)m(y)m(ed)24 b(immediately)g(b)s(efore)f(the)
+g(last)h(line)f(of)h(the)f(primary)f(prompt)g(when)1110
+2461 y(vi)32 b(editing)h(mo)s(de)f(is)g(activ)m(e)j(and)c(in)h(command)
+g(mo)s(de.)46 b(The)31 b(v)-5 b(alue)33 b(is)f(ex-)1110
+2570 y(panded)26 b(lik)m(e)i(a)f(k)m(ey)h(binding,)e(so)i(the)f
+(standard)f(set)h(of)g(meta-)h(and)e(con)m(trol)1110
+2680 y(pre\014xes)34 b(and)g(bac)m(kslash)i(escap)s(e)g(sequences)f(is)
+g(a)m(v)-5 b(ailable.)57 b(Use)35 b(the)g(`)p Ft(\\1)p
+Fu(')1110 2790 y(and)23 b(`)p Ft(\\2)p Fu(')h(escap)s(es)h(to)f(b)s
+(egin)g(and)f(end)g(sequences)i(of)f(non-prin)m(ting)f(c)m(harac-)1110
+2899 y(ters,)31 b(whic)m(h)g(can)g(b)s(e)f(used)g(to)h(em)m(b)s(ed)f(a)
+h(terminal)h(con)m(trol)g(sequence)f(in)m(to)1110 3009
+y(the)g(mo)s(de)f(string.)40 b(The)30 b(default)h(is)f(`)p
+Ft(\(cmd\))p Fu('.)630 3158 y Ft(vi-ins-mode-string)1110
+3268 y Fu(If)j(the)h Fr(sho)m(w-mo)s(de-in-prompt)h Fu(v)-5
+b(ariable)35 b(is)e(enabled,)i(this)f(string)f(is)h(dis-)1110
+3377 y(pla)m(y)m(ed)24 b(immediately)g(b)s(efore)f(the)g(last)h(line)f
+(of)h(the)f(primary)f(prompt)g(when)1110 3487 y(vi)35
+b(editing)h(mo)s(de)e(is)i(activ)m(e)h(and)d(in)h(insertion)g(mo)s(de.)
+54 b(The)35 b(v)-5 b(alue)35 b(is)g(ex-)1110 3597 y(panded)26
+b(lik)m(e)i(a)f(k)m(ey)h(binding,)e(so)i(the)f(standard)f(set)h(of)g
+(meta-)h(and)e(con)m(trol)1110 3706 y(pre\014xes)34 b(and)g(bac)m
+(kslash)i(escap)s(e)g(sequences)f(is)g(a)m(v)-5 b(ailable.)57
+b(Use)35 b(the)g(`)p Ft(\\1)p Fu(')1110 3816 y(and)23
+b(`)p Ft(\\2)p Fu(')h(escap)s(es)h(to)f(b)s(egin)g(and)f(end)g
+(sequences)i(of)f(non-prin)m(ting)f(c)m(harac-)1110 3925
+y(ters,)31 b(whic)m(h)g(can)g(b)s(e)f(used)g(to)h(em)m(b)s(ed)f(a)h
+(terminal)h(con)m(trol)g(sequence)f(in)m(to)1110 4035
+y(the)g(mo)s(de)f(string.)40 b(The)30 b(default)h(is)f(`)p
+Ft(\(ins\))p Fu('.)630 4184 y Ft(visible-stats)1110 4294
+y Fu(If)h(set)i(to)f(`)p Ft(on)p Fu(',)h(a)f(c)m(haracter)i(denoting)e
+(a)g(\014le's)g(t)m(yp)s(e)g(is)g(app)s(ended)e(to)j(the)1110
+4403 y(\014lename)e(when)e(listing)i(p)s(ossible)f(completions.)42
+b(The)30 b(default)g(is)h(`)p Ft(off)p Fu('.)150 4553
+y(Key)f(Bindings)630 4663 y(The)41 b(syn)m(tax)i(for)f(con)m(trolling)h
+(k)m(ey)g(bindings)e(in)h(the)g(init)g(\014le)g(is)g(simple.)75
+b(First)43 b(y)m(ou)630 4772 y(need)27 b(to)i(\014nd)d(the)i(name)f(of)
+h(the)g(command)f(that)i(y)m(ou)f(w)m(an)m(t)g(to)g(c)m(hange.)41
+b(The)27 b(follo)m(wing)630 4882 y(sections)37 b(con)m(tain)g(tables)g
+(of)f(the)g(command)f(name,)j(the)e(default)g(k)m(eybinding,)h(if)f(an)
+m(y)-8 b(,)630 4991 y(and)30 b(a)h(short)f(description)g(of)h(what)f
+(the)g(command)h(do)s(es.)630 5121 y(Once)36 b(y)m(ou)g(kno)m(w)g(the)g
+(name)g(of)g(the)g(command,)h(simply)f(place)h(on)e(a)i(line)f(in)g
+(the)g(init)630 5230 y(\014le)e(the)g(name)f(of)h(the)g(k)m(ey)g(y)m
+(ou)g(wish)f(to)h(bind)f(the)h(command)f(to,)i(a)f(colon,)i(and)d(then)
+630 5340 y(the)f(name)h(of)f(the)g(command.)46 b(There)32
+b(can)g(b)s(e)g(no)g(space)g(b)s(et)m(w)m(een)h(the)f(k)m(ey)h(name)g
+(and)p eop end
+%%Page: 121 127
+TeXDict begin 121 126 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(121)630 299 y(the)41
+b(colon)h({)f(that)g(will)g(b)s(e)g(in)m(terpreted)g(as)g(part)f(of)h
+(the)g(k)m(ey)h(name.)72 b(The)40 b(name)h(of)630 408
+y(the)35 b(k)m(ey)g(can)g(b)s(e)f(expressed)f(in)i(di\013eren)m(t)g(w)m
+(a)m(ys,)h(dep)s(ending)d(on)h(what)h(y)m(ou)g(\014nd)e(most)630
+518 y(comfortable.)630 650 y(In)i(addition)h(to)h(command)f(names,)i
+(readline)e(allo)m(ws)h(k)m(eys)g(to)g(b)s(e)e(b)s(ound)f(to)j(a)f
+(string)630 759 y(that)31 b(is)f(inserted)h(when)e(the)i(k)m(ey)g(is)f
+(pressed)g(\(a)h Fr(macro)5 b Fu(\).)630 891 y(The)42
+b Ft(bind)30 b(-p)42 b Fu(command)h(displa)m(ys)g(Readline)g(function)g
+(names)g(and)f(bindings)g(in)h(a)630 1000 y(format)37
+b(that)h(can)f(put)f(directly)i(in)m(to)g(an)f(initialization)j
+(\014le.)60 b(See)38 b(Section)f(4.2)i([Bash)630 1110
+y(Builtins],)31 b(page)g(51.)630 1263 y Fr(k)m(eyname)5
+b Fu(:)42 b Fr(function-name)35 b Fu(or)c Fr(macro)1110
+1373 y(k)m(eyname)k Fu(is)29 b(the)f(name)h(of)g(a)g(k)m(ey)h(sp)s
+(elled)e(out)h(in)g(English.)39 b(F)-8 b(or)30 b(example:)1350
+1504 y Ft(Control-u:)45 b(universal-argument)1350 1614
+y(Meta-Rubout:)f(backward-kill-word)1350 1724 y(Control-o:)h(">)i
+(output")1110 1855 y Fu(In)94 b(the)g(example)h(ab)s(o)m(v)m(e,)112
+b Fj(C-u)94 b Fu(is)g(b)s(ound)f(to)i(the)f(function)1110
+1965 y Ft(universal-argument)p Fu(,)124 b Fj(M-DEL)107
+b Fu(is)i(b)s(ound)e(to)j(the)f(function)1110 2074 y
+Ft(backward-kill-word)p Fu(,)75 b(and)69 b Fj(C-o)g Fu(is)h(b)s(ound)e
+(to)j(run)d(the)i(macro)1110 2184 y(expressed)45 b(on)h(the)g(righ)m(t)
+g(hand)e(side)i(\(that)h(is,)i(to)e(insert)e(the)h(text)h(`)p
+Ft(>)1110 2293 y(output)p Fu(')29 b(in)m(to)i(the)g(line\).)1110
+2425 y(A)62 b(n)m(um)m(b)s(er)e(of)i(sym)m(b)s(olic)h(c)m(haracter)g
+(names)f(are)g(recognized)h(while)1110 2534 y(pro)s(cessing)40
+b(this)f(k)m(ey)i(binding)e(syn)m(tax:)60 b Fr(DEL)p
+Fu(,)42 b Fr(ESC)p Fu(,)g Fr(ESCAPE)p Fu(,)f Fr(LFD)p
+Fu(,)1110 2644 y Fr(NEWLINE)p Fu(,)31 b Fr(RET)p Fu(,)f
+Fr(RETURN)p Fu(,)g Fr(R)m(UBOUT)p Fu(,)h Fr(SP)-8 b(A)m(CE)p
+Fu(,)31 b Fr(SPC)p Fu(,)e(and)h Fr(T)-8 b(AB)p Fu(.)630
+2798 y Ft(")p Fr(k)m(eyseq)r Ft(")p Fu(:)41 b Fr(function-name)36
+b Fu(or)30 b Fr(macro)1110 2907 y(k)m(eyseq)k Fu(di\013ers)d(from)f
+Fr(k)m(eyname)37 b Fu(ab)s(o)m(v)m(e)32 b(in)f(that)h(strings)f
+(denoting)g(an)g(en-)1110 3017 y(tire)j(k)m(ey)h(sequence)f(can)g(b)s
+(e)f(sp)s(eci\014ed,)h(b)m(y)f(placing)i(the)f(k)m(ey)g(sequence)g(in)
+1110 3126 y(double)29 b(quotes.)41 b(Some)29 b Fm(gnu)h
+Fu(Emacs)f(st)m(yle)i(k)m(ey)f(escap)s(es)g(can)g(b)s(e)f(used,)g(as)
+1110 3236 y(in)k(the)h(follo)m(wing)i(example,)f(but)e(the)h(sp)s
+(ecial)h(c)m(haracter)g(names)f(are)g(not)1110 3345 y(recognized.)1350
+3477 y Ft("\\C-u":)46 b(universal-argument)1350 3587
+y("\\C-x\\C-r":)f(re-read-init-file)1350 3696 y("\\e[11~":)g("Function)
+h(Key)g(1")1110 3828 y Fu(In)64 b(the)g(ab)s(o)m(v)m(e)i(example,)74
+b Fj(C-u)64 b Fu(is)g(again)i(b)s(ound)c(to)k(the)e(function)1110
+3937 y Ft(universal-argument)39 b Fu(\(just)k(as)h(it)g(w)m(as)g(in)g
+(the)f(\014rst)g(example\),)49 b(`)p Fj(C-x)1110 4047
+y(C-r)p Fu(')30 b(is)g(b)s(ound)e(to)j(the)g(function)f
+Ft(re-read-init-file)p Fu(,)c(and)j(`)p Ft(ESC)h([)g(1)g(1)1110
+4156 y(~)p Fu(')g(is)h(b)s(ound)d(to)j(insert)f(the)h(text)g(`)p
+Ft(Function)e(Key)g(1)p Fu('.)630 4310 y(The)g(follo)m(wing)i
+Fm(gnu)f Fu(Emacs)g(st)m(yle)h(escap)s(e)f(sequences)g(are)g(a)m(v)-5
+b(ailable)32 b(when)d(sp)s(ecifying)630 4419 y(k)m(ey)i(sequences:)630
+4573 y Fj(\\C-)336 b Fu(con)m(trol)32 b(pre\014x)630
+4726 y Fj(\\M-)336 b Fu(meta)31 b(pre\014x)630 4880 y
+Fj(\\e)384 b Fu(an)30 b(escap)s(e)h(c)m(haracter)630
+5033 y Fj(\\\\)384 b Fu(bac)m(kslash)630 5187 y Fj(\\)p
+Ft(")g(")p Fu(,)30 b(a)h(double)f(quotation)i(mark)630
+5340 y Fj(\\')384 b Ft(')p Fu(,)30 b(a)h(single)g(quote)g(or)f(ap)s
+(ostrophe)p eop end
+%%Page: 122 128
+TeXDict begin 122 127 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(122)630 299 y(In)27
+b(addition)h(to)g(the)g Fm(gnu)f Fu(Emacs)h(st)m(yle)h(escap)s(e)f
+(sequences,)h(a)f(second)f(set)h(of)g(bac)m(kslash)630
+408 y(escap)s(es)j(is)f(a)m(v)-5 b(ailable:)630 570 y
+Ft(\\a)384 b Fu(alert)31 b(\(b)s(ell\))630 731 y Ft(\\b)384
+b Fu(bac)m(kspace)630 892 y Ft(\\d)g Fu(delete)630 1053
+y Ft(\\f)g Fu(form)30 b(feed)630 1214 y Ft(\\n)384 b
+Fu(newline)630 1375 y Ft(\\r)g Fu(carriage)32 b(return)630
+1536 y Ft(\\t)384 b Fu(horizon)m(tal)32 b(tab)630 1697
+y Ft(\\v)384 b Fu(v)m(ertical)32 b(tab)630 1858 y Ft(\\)p
+Fj(nnn)288 b Fu(the)35 b(eigh)m(t-bit)h(c)m(haracter)g(whose)e(v)-5
+b(alue)35 b(is)g(the)f(o)s(ctal)i(v)-5 b(alue)35 b Fr(nnn)e
+Fu(\(one)i(to)1110 1968 y(three)c(digits\))630 2129 y
+Ft(\\x)p Fj(HH)288 b Fu(the)38 b(eigh)m(t-bit)i(c)m(haracter)g(whose)e
+(v)-5 b(alue)39 b(is)f(the)h(hexadecimal)g(v)-5 b(alue)39
+b Fr(HH)1110 2239 y Fu(\(one)31 b(or)f(t)m(w)m(o)i(hex)e(digits\))630
+2400 y(When)37 b(en)m(tering)h(the)g(text)g(of)g(a)g(macro,)i(single)e
+(or)f(double)g(quotes)h(m)m(ust)f(b)s(e)g(used)f(to)630
+2509 y(indicate)23 b(a)e(macro)h(de\014nition.)38 b(Unquoted)21
+b(text)i(is)e(assumed)g(to)h(b)s(e)f(a)h(function)f(name.)38
+b(In)630 2619 y(the)22 b(macro)f(b)s(o)s(dy)-8 b(,)23
+b(the)e(bac)m(kslash)h(escap)s(es)g(describ)s(ed)e(ab)s(o)m(v)m(e)j
+(are)e(expanded.)37 b(Bac)m(kslash)630 2729 y(will)j(quote)h(an)m(y)f
+(other)g(c)m(haracter)i(in)d(the)i(macro)f(text,)k(including)39
+b(`)p Ft(")p Fu(')h(and)g(`)p Ft(')p Fu('.)69 b(F)-8
+b(or)630 2838 y(example,)28 b(the)e(follo)m(wing)h(binding)d(will)i
+(mak)m(e)h(`)p Fj(C-x)j Ft(\\)p Fu(')c(insert)f(a)h(single)h(`)p
+Ft(\\)p Fu(')f(in)m(to)g(the)g(line:)870 2974 y Ft("\\C-x\\\\":)45
+b("\\\\")150 3175 y Fk(8.3.2)63 b(Conditional)41 b(Init)g(Constructs)
+150 3322 y Fu(Readline)c(implemen)m(ts)g(a)h(facilit)m(y)g(similar)f
+(in)g(spirit)f(to)i(the)f(conditional)h(compilation)g(features)f(of)150
+3431 y(the)31 b(C)f(prepro)s(cessor)g(whic)m(h)g(allo)m(ws)i(k)m(ey)g
+(bindings)d(and)h(v)-5 b(ariable)32 b(settings)f(to)h(b)s(e)e(p)s
+(erformed)f(as)i(the)150 3541 y(result)f(of)h(tests.)41
+b(There)30 b(are)h(four)f(parser)f(directiv)m(es)j(used.)150
+3703 y Ft($if)336 b Fu(The)31 b Ft($if)f Fu(construct)i(allo)m(ws)h
+(bindings)d(to)i(b)s(e)e(made)i(based)f(on)g(the)g(editing)h(mo)s(de,)g
+(the)630 3812 y(terminal)37 b(b)s(eing)f(used,)h(or)f(the)h
+(application)g(using)f(Readline.)59 b(The)36 b(text)h(of)f(the)h(test,)
+630 3922 y(after)30 b(an)m(y)g(comparison)g(op)s(erator,)g(extends)f
+(to)h(the)g(end)f(of)h(the)f(line;)i(unless)e(otherwise)630
+4031 y(noted,)i(no)f(c)m(haracters)i(are)f(required)e(to)i(isolate)i
+(it.)630 4193 y Ft(mode)288 b Fu(The)30 b Ft(mode=)e
+Fu(form)i(of)g(the)h Ft($if)e Fu(directiv)m(e)j(is)e(used)f(to)i(test)g
+(whether)e(Read-)1110 4302 y(line)44 b(is)f(in)g Ft(emacs)f
+Fu(or)h Ft(vi)g Fu(mo)s(de.)79 b(This)42 b(ma)m(y)i(b)s(e)e(used)h(in)g
+(conjunction)1110 4412 y(with)c(the)h(`)p Ft(set)29 b(keymap)p
+Fu(')38 b(command,)k(for)d(instance,)j(to)e(set)g(bindings)e(in)1110
+4521 y(the)32 b Ft(emacs-standard)c Fu(and)j Ft(emacs-ctlx)d
+Fu(k)m(eymaps)k(only)g(if)g(Readline)g(is)1110 4631 y(starting)f(out)g
+(in)f Ft(emacs)f Fu(mo)s(de.)630 4792 y Ft(term)288 b
+Fu(The)26 b Ft(term=)g Fu(form)g(ma)m(y)i(b)s(e)e(used)g(to)i(include)f
+(terminal-sp)s(eci\014c)g(k)m(ey)h(bind-)1110 4902 y(ings,)38
+b(p)s(erhaps)c(to)j(bind)e(the)h(k)m(ey)h(sequences)f(output)g(b)m(y)g
+(the)g(terminal's)1110 5011 y(function)24 b(k)m(eys.)39
+b(The)23 b(w)m(ord)h(on)f(the)i(righ)m(t)f(side)g(of)g(the)g(`)p
+Ft(=)p Fu(')g(is)g(tested)h(against)1110 5121 y(b)s(oth)k(the)h(full)g
+(name)g(of)g(the)g(terminal)h(and)e(the)i(p)s(ortion)e(of)h(the)g
+(terminal)1110 5230 y(name)k(b)s(efore)f(the)g(\014rst)g(`)p
+Ft(-)p Fu('.)50 b(This)33 b(allo)m(ws)i Ft(sun)e Fu(to)h(matc)m(h)g(b)s
+(oth)f Ft(sun)g Fu(and)1110 5340 y Ft(sun-cmd)p Fu(,)c(for)h(instance.)
+p eop end
+%%Page: 123 129
+TeXDict begin 123 128 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(123)630 299 y Ft(version)144
+b Fu(The)44 b Ft(version)f Fu(test)i(ma)m(y)h(b)s(e)e(used)f(to)j(p)s
+(erform)d(comparisons)i(against)1110 408 y(sp)s(eci\014c)c(Readline)i
+(v)m(ersions.)74 b(The)42 b Ft(version)d Fu(expands)i(to)h(the)g
+(curren)m(t)1110 518 y(Readline)25 b(v)m(ersion.)39 b(The)23
+b(set)h(of)g(comparison)h(op)s(erators)f(includes)f(`)p
+Ft(=)p Fu(')h(\(and)1110 628 y(`)p Ft(==)p Fu('\),)33
+b(`)p Ft(!=)p Fu(',)f(`)p Ft(<=)p Fu(',)h(`)p Ft(>=)p
+Fu(',)f(`)p Ft(<)p Fu(',)h(and)e(`)p Ft(>)p Fu('.)46
+b(The)31 b(v)m(ersion)i(n)m(um)m(b)s(er)d(supplied)h(on)1110
+737 y(the)j(righ)m(t)h(side)f(of)g(the)g(op)s(erator)g(consists)h(of)f
+(a)g(ma)5 b(jor)35 b(v)m(ersion)f(n)m(um)m(b)s(er,)1110
+847 y(an)45 b(optional)i(decimal)f(p)s(oin)m(t,)k(and)44
+b(an)i(optional)g(minor)f(v)m(ersion)h(\(e.g.,)1110 956
+y(`)p Ft(7.1)p Fu('\).)40 b(If)27 b(the)h(minor)f(v)m(ersion)h(is)g
+(omitted,)h(it)f(is)g(assumed)f(to)h(b)s(e)f(`)p Ft(0)p
+Fu('.)40 b(The)1110 1066 y(op)s(erator)34 b(ma)m(y)g(b)s(e)f(separated)
+g(from)g(the)h(string)f Ft(version)f Fu(and)h(from)g(the)1110
+1176 y(v)m(ersion)39 b(n)m(um)m(b)s(er)f(argumen)m(t)h(b)m(y)f
+(whitespace.)67 b(The)38 b(follo)m(wing)i(example)1110
+1285 y(sets)31 b(a)g(v)-5 b(ariable)31 b(if)f(the)h(Readline)g(v)m
+(ersion)f(b)s(eing)g(used)g(is)g(7.0)i(or)e(new)m(er:)1350
+1440 y Ft($if)47 b(version)f(>=)h(7.0)1350 1550 y(set)g
+(show-mode-in-prompt)42 b(on)1350 1659 y($endif)630 1860
+y(application)1110 1970 y Fu(The)21 b Fr(application)j
+Fu(construct)e(is)g(used)f(to)i(include)f(application-sp)s(eci\014c)h
+(set-)1110 2079 y(tings.)39 b(Eac)m(h)26 b(program)e(using)g(the)h
+(Readline)g(library)g(sets)g(the)g Fr(application)1110
+2189 y(name)p Fu(,)g(and)e(y)m(ou)g(can)h(test)g(for)f(a)g(particular)h
+(v)-5 b(alue.)39 b(This)22 b(could)h(b)s(e)g(used)f(to)1110
+2298 y(bind)32 b(k)m(ey)h(sequences)g(to)h(functions)e(useful)g(for)h
+(a)g(sp)s(eci\014c)f(program.)48 b(F)-8 b(or)1110 2408
+y(instance,)35 b(the)e(follo)m(wing)h(command)f(adds)f(a)i(k)m(ey)f
+(sequence)h(that)f(quotes)1110 2518 y(the)e(curren)m(t)f(or)g(previous)
+g(w)m(ord)g(in)g(Bash:)1350 2673 y Ft($if)47 b(Bash)1350
+2782 y(#)g(Quote)g(the)g(current)f(or)h(previous)e(word)1350
+2892 y("\\C-xq":)h("\\eb\\"\\ef\\"")1350 3002 y($endif)630
+3202 y(variable)96 b Fu(The)33 b Fr(v)-5 b(ariable)39
+b Fu(construct)33 b(pro)m(vides)g(simple)g(equalit)m(y)i(tests)e(for)g
+(Readline)1110 3312 y(v)-5 b(ariables)32 b(and)f(v)-5
+b(alues.)45 b(The)32 b(p)s(ermitted)f(comparison)h(op)s(erators)f(are)i
+(`)p Ft(=)p Fu(',)1110 3421 y(`)p Ft(==)p Fu(',)49 b(and)44
+b(`)p Ft(!=)p Fu('.)85 b(The)44 b(v)-5 b(ariable)46 b(name)f(m)m(ust)g
+(b)s(e)g(separated)g(from)g(the)1110 3531 y(comparison)25
+b(op)s(erator)g(b)m(y)g(whitespace;)j(the)d(op)s(erator)g(ma)m(y)g(b)s
+(e)f(separated)1110 3641 y(from)33 b(the)h(v)-5 b(alue)35
+b(on)f(the)g(righ)m(t)g(hand)f(side)h(b)m(y)f(whitespace.)52
+b(Both)35 b(string)1110 3750 y(and)i(b)s(o)s(olean)g(v)-5
+b(ariables)38 b(ma)m(y)h(b)s(e)d(tested.)63 b(Bo)s(olean)39
+b(v)-5 b(ariables)38 b(m)m(ust)g(b)s(e)1110 3860 y(tested)46
+b(against)g(the)f(v)-5 b(alues)46 b Fr(on)f Fu(and)f
+Fr(o\013)p Fu(.)85 b(The)45 b(follo)m(wing)h(example)g(is)1110
+3969 y(equiv)-5 b(alen)m(t)32 b(to)f(the)f Ft(mode=emacs)e
+Fu(test)j(describ)s(ed)f(ab)s(o)m(v)m(e:)1350 4124 y
+Ft($if)47 b(editing-mode)d(==)k(emacs)1350 4234 y(set)f
+(show-mode-in-prompt)42 b(on)1350 4344 y($endif)150 4544
+y($endif)192 b Fu(This)29 b(command,)i(as)f(seen)h(in)f(the)g(previous)
+g(example,)h(terminates)g(an)g Ft($if)e Fu(command.)150
+4745 y Ft($else)240 b Fu(Commands)29 b(in)h(this)h(branc)m(h)e(of)i
+(the)f Ft($if)g Fu(directiv)m(e)i(are)f(executed)g(if)f(the)h(test)g
+(fails.)150 4945 y Ft($include)96 b Fu(This)43 b(directiv)m(e)i(tak)m
+(es)g(a)e(single)i(\014lename)e(as)h(an)f(argumen)m(t)h(and)f(reads)g
+(commands)630 5055 y(and)38 b(bindings)f(from)h(that)i(\014le.)65
+b(F)-8 b(or)39 b(example,)j(the)d(follo)m(wing)h(directiv)m(e)g(reads)e
+(from)630 5165 y Ft(/etc/inputrc)p Fu(:)870 5320 y Ft($include)46
+b(/etc/inputrc)p eop end
+%%Page: 124 130
+TeXDict begin 124 129 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(124)150 299 y Fk(8.3.3)63
+b(Sample)41 b(Init)g(File)150 446 y Fu(Here)27 b(is)f(an)h(example)g
+(of)f(an)h Fr(inputrc)k Fu(\014le.)39 b(This)26 b(illustrates)h(k)m(ey)
+h(binding,)e(v)-5 b(ariable)27 b(assignmen)m(t,)i(and)150
+555 y(conditional)j(syn)m(tax.)p eop end
+%%Page: 125 131
+TeXDict begin 125 130 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(125)390 408 y Ft(#)47
+b(This)g(file)g(controls)e(the)i(behaviour)e(of)j(line)e(input)h
+(editing)e(for)390 518 y(#)i(programs)f(that)h(use)g(the)f(GNU)h
+(Readline)f(library.)93 b(Existing)390 628 y(#)47 b(programs)f(include)
+g(FTP,)g(Bash,)h(and)g(GDB.)390 737 y(#)390 847 y(#)g(You)g(can)g
+(re-read)f(the)h(inputrc)f(file)g(with)h(C-x)g(C-r.)390
+956 y(#)g(Lines)g(beginning)e(with)i('#')g(are)g(comments.)390
+1066 y(#)390 1176 y(#)g(First,)g(include)e(any)i(system-wide)e
+(bindings)h(and)g(variable)390 1285 y(#)h(assignments)e(from)i
+(/etc/Inputrc)390 1395 y($include)f(/etc/Inputrc)390
+1614 y(#)390 1724 y(#)h(Set)g(various)f(bindings)g(for)h(emacs)f(mode.)
+390 1943 y(set)h(editing-mode)d(emacs)390 2162 y($if)j(mode=emacs)390
+2381 y(Meta-Control-h:)91 b(backward-kill-word)43 b(Text)k(after)f(the)
+h(function)f(name)g(is)h(ignored)390 2600 y(#)390 2710
+y(#)g(Arrow)g(keys)f(in)i(keypad)e(mode)390 2819 y(#)390
+2929 y(#"\\M-OD":)379 b(backward-char)390 3039 y(#"\\M-OC":)g
+(forward-char)390 3148 y(#"\\M-OA":)g(previous-history)390
+3258 y(#"\\M-OB":)g(next-history)390 3367 y(#)390 3477
+y(#)47 b(Arrow)g(keys)f(in)i(ANSI)e(mode)390 3587 y(#)390
+3696 y("\\M-[D":)380 b(backward-char)390 3806 y("\\M-[C":)g
+(forward-char)390 3915 y("\\M-[A":)g(previous-history)390
+4025 y("\\M-[B":)g(next-history)390 4134 y(#)390 4244
+y(#)47 b(Arrow)g(keys)f(in)i(8)f(bit)g(keypad)f(mode)390
+4354 y(#)390 4463 y(#"\\M-\\C-OD":)331 b(backward-char)390
+4573 y(#"\\M-\\C-OC":)g(forward-char)390 4682 y(#"\\M-\\C-OA":)g
+(previous-history)390 4792 y(#"\\M-\\C-OB":)g(next-history)390
+4902 y(#)390 5011 y(#)47 b(Arrow)g(keys)f(in)i(8)f(bit)g(ANSI)g(mode)
+390 5121 y(#)390 5230 y(#"\\M-\\C-[D":)331 b(backward-char)390
+5340 y(#"\\M-\\C-[C":)g(forward-char)p eop end
+%%Page: 126 132
+TeXDict begin 126 131 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(126)390 299 y Ft(#"\\M-\\C-[A":)
+331 b(previous-history)390 408 y(#"\\M-\\C-[B":)g(next-history)390
+628 y(C-q:)47 b(quoted-insert)390 847 y($endif)390 1066
+y(#)g(An)h(old-style)d(binding.)93 b(This)47 b(happens)f(to)h(be)g(the)
+g(default.)390 1176 y(TAB:)g(complete)390 1395 y(#)g(Macros)g(that)f
+(are)h(convenient)e(for)i(shell)f(interaction)390 1504
+y($if)h(Bash)390 1614 y(#)g(edit)g(the)g(path)390 1724
+y("\\C-xp":)f("PATH=${PATH}\\e\\C-e\\C-a)o(\\ef)o(\\C-f)o(")390
+1833 y(#)h(prepare)f(to)h(type)g(a)h(quoted)e(word)g(--)390
+1943 y(#)h(insert)g(open)f(and)h(close)f(double)h(quotes)390
+2052 y(#)g(and)g(move)g(to)g(just)g(after)f(the)h(open)g(quote)390
+2162 y("\\C-x\\"":)e("\\"\\"\\C-b")390 2271 y(#)i(insert)g(a)g
+(backslash)e(\(testing)h(backslash)f(escapes)390 2381
+y(#)i(in)h(sequences)d(and)i(macros\))390 2491 y("\\C-x\\\\":)e("\\\\")
+390 2600 y(#)i(Quote)g(the)g(current)f(or)h(previous)e(word)390
+2710 y("\\C-xq":)h("\\eb\\"\\ef\\"")390 2819 y(#)h(Add)g(a)h(binding)e
+(to)h(refresh)f(the)h(line,)f(which)g(is)h(unbound)390
+2929 y("\\C-xr":)f(redraw-current-line)390 3039 y(#)h(Edit)g(variable)f
+(on)h(current)f(line.)390 3148 y("\\M-\\C-v":)f
+("\\C-a\\C-k$\\C-y\\M-\\C-e\\C-)o(a\\C-)o(y=")390 3258
+y($endif)390 3477 y(#)i(use)g(a)h(visible)e(bell)g(if)h(one)g(is)h
+(available)390 3587 y(set)f(bell-style)e(visible)390
+3806 y(#)i(don't)g(strip)f(characters)f(to)i(7)h(bits)e(when)h(reading)
+390 3915 y(set)g(input-meta)e(on)390 4134 y(#)i(allow)g(iso-latin1)e
+(characters)g(to)i(be)g(inserted)f(rather)390 4244 y(#)h(than)g
+(converted)e(to)j(prefix-meta)c(sequences)390 4354 y(set)j
+(convert-meta)d(off)390 4573 y(#)j(display)f(characters)f(with)i(the)g
+(eighth)f(bit)h(set)g(directly)390 4682 y(#)g(rather)g(than)f(as)h
+(meta-prefixed)e(characters)390 4792 y(set)i(output-meta)e(on)390
+5011 y(#)i(if)h(there)e(are)h(150)g(or)g(more)g(possible)e(completions)
+g(for)i(a)g(word,)390 5121 y(#)g(ask)g(whether)f(or)h(not)g(the)g(user)
+g(wants)f(to)h(see)g(all)g(of)g(them)390 5230 y(set)g
+(completion-query-items)42 b(150)p eop end
+%%Page: 127 133
+TeXDict begin 127 132 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(127)390 299 y Ft(#)47
+b(For)g(FTP)390 408 y($if)g(Ftp)390 518 y("\\C-xg":)f("get)g(\\M-?")390
+628 y("\\C-xt":)g("put)g(\\M-?")390 737 y("\\M-.":)g(yank-last-arg)390
+847 y($endif)150 1089 y Fs(8.4)68 b(Bindable)45 b(Readline)i(Commands)
+150 1248 y Fu(This)32 b(section)h(describ)s(es)f(Readline)h(commands)f
+(that)h(ma)m(y)h(b)s(e)d(b)s(ound)g(to)i(k)m(ey)g(sequences.)48
+b(Y)-8 b(ou)33 b(can)150 1358 y(list)40 b(y)m(our)f(k)m(ey)i(bindings)d
+(b)m(y)h(executing)i Ft(bind)29 b(-P)39 b Fu(or,)j(for)d(a)h(more)g
+(terse)g(format,)i(suitable)e(for)f(an)150 1468 y Fr(inputrc)34
+b Fu(\014le,)29 b Ft(bind)g(-p)p Fu(.)40 b(\(See)30 b(Section)f(4.2)h
+([Bash)g(Builtins],)g(page)g(51.\))41 b(Command)28 b(names)h(without)
+150 1577 y(an)h(accompan)m(ying)i(k)m(ey)f(sequence)g(are)g(un)m(b)s
+(ound)d(b)m(y)i(default.)275 1713 y(In)25 b(the)h(follo)m(wing)i
+(descriptions,)f Fr(p)s(oin)m(t)h Fu(refers)e(to)h(the)f(curren)m(t)g
+(cursor)g(p)s(osition,)h(and)f Fr(mark)31 b Fu(refers)150
+1822 y(to)40 b(a)f(cursor)f(p)s(osition)h(sa)m(v)m(ed)h(b)m(y)f(the)g
+Ft(set-mark)d Fu(command.)66 b(The)38 b(text)i(b)s(et)m(w)m(een)g(the)f
+(p)s(oin)m(t)g(and)150 1932 y(mark)30 b(is)h(referred)e(to)i(as)g(the)f
+Fr(region)p Fu(.)150 2132 y Fk(8.4.1)63 b(Commands)42
+b(F)-10 b(or)41 b(Mo)m(ving)150 2304 y Ft(beginning-of-line)26
+b(\(C-a\))630 2414 y Fu(Mo)m(v)m(e)32 b(to)g(the)e(start)h(of)g(the)f
+(curren)m(t)g(line.)150 2574 y Ft(end-of-line)d(\(C-e\))630
+2684 y Fu(Mo)m(v)m(e)32 b(to)g(the)e(end)g(of)g(the)h(line.)150
+2844 y Ft(forward-char)c(\(C-f\))630 2954 y Fu(Mo)m(v)m(e)32
+b(forw)m(ard)e(a)h(c)m(haracter.)150 3114 y Ft(backward-char)c(\(C-b\))
+630 3223 y Fu(Mo)m(v)m(e)32 b(bac)m(k)g(a)e(c)m(haracter.)150
+3384 y Ft(forward-word)d(\(M-f\))630 3493 y Fu(Mo)m(v)m(e)32
+b(forw)m(ard)e(to)h(the)f(end)g(of)g(the)h(next)f(w)m(ord.)41
+b(W)-8 b(ords)30 b(are)h(comp)s(osed)f(of)g(letters)i(and)630
+3603 y(digits.)150 3763 y Ft(backward-word)27 b(\(M-b\))630
+3873 y Fu(Mo)m(v)m(e)36 b(bac)m(k)e(to)g(the)g(start)g(of)g(the)g
+(curren)m(t)f(or)g(previous)g(w)m(ord.)50 b(W)-8 b(ords)34
+b(are)g(comp)s(osed)630 3982 y(of)d(letters)g(and)f(digits.)150
+4143 y Ft(shell-forward-word)25 b(\(M-C-f\))630 4252
+y Fu(Mo)m(v)m(e)30 b(forw)m(ard)e(to)h(the)f(end)f(of)h(the)h(next)f(w)
+m(ord.)40 b(W)-8 b(ords)28 b(are)g(delimited)h(b)m(y)f(non-quoted)630
+4362 y(shell)j(metac)m(haracters.)150 4522 y Ft(shell-backward-word)25
+b(\(M-C-b\))630 4632 y Fu(Mo)m(v)m(e)37 b(bac)m(k)e(to)h(the)f(start)g
+(of)g(the)g(curren)m(t)g(or)f(previous)h(w)m(ord.)53
+b(W)-8 b(ords)35 b(are)g(delimited)630 4741 y(b)m(y)30
+b(non-quoted)h(shell)f(metac)m(haracters.)150 4902 y
+Ft(previous-screen-line)25 b(\(\))630 5011 y Fu(A)m(ttempt)41
+b(to)g(mo)m(v)m(e)h(p)s(oin)m(t)e(to)h(the)f(same)h(ph)m(ysical)g
+(screen)f(column)g(on)g(the)g(previous)630 5121 y(ph)m(ysical)26
+b(screen)f(line.)39 b(This)24 b(will)i(not)f(ha)m(v)m(e)h(the)f
+(desired)g(e\013ect)h(if)f(the)h(curren)m(t)e(Readline)630
+5230 y(line)k(do)s(es)f(not)g(tak)m(e)i(up)d(more)i(than)f(one)g(ph)m
+(ysical)h(line)g(or)f(if)g(p)s(oin)m(t)h(is)f(not)h(greater)g(than)630
+5340 y(the)j(length)f(of)h(the)f(prompt)g(plus)f(the)i(screen)f(width.)
+p eop end
+%%Page: 128 134
+TeXDict begin 128 133 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(128)150 299 y Ft(next-screen-line)
+26 b(\(\))630 408 y Fu(A)m(ttempt)g(to)f(mo)m(v)m(e)i(p)s(oin)m(t)d(to)
+i(the)e(same)i(ph)m(ysical)f(screen)g(column)f(on)h(the)f(next)h(ph)m
+(ysical)630 518 y(screen)e(line.)39 b(This)23 b(will)g(not)h(ha)m(v)m
+(e)h(the)e(desired)g(e\013ect)i(if)e(the)g(curren)m(t)h(Readline)g
+(line)f(do)s(es)630 628 y(not)k(tak)m(e)i(up)e(more)g(than)g(one)g(ph)m
+(ysical)h(line)g(or)f(if)g(the)h(length)f(of)h(the)f(curren)m(t)g
+(Readline)630 737 y(line)k(is)f(not)h(greater)g(than)f(the)h(length)g
+(of)f(the)h(prompt)e(plus)h(the)g(screen)h(width.)150
+916 y Ft(clear-display)c(\(M-C-l\))630 1026 y Fu(Clear)33
+b(the)g(screen)g(and,)h(if)e(p)s(ossible,)i(the)f(terminal's)g
+(scrollbac)m(k)i(bu\013er,)e(then)f(redra)m(w)630 1136
+y(the)f(curren)m(t)f(line,)h(lea)m(ving)h(the)e(curren)m(t)h(line)f(at)
+h(the)g(top)g(of)f(the)h(screen.)150 1315 y Ft(clear-screen)c(\(C-l\))
+630 1424 y Fu(Clear)35 b(the)f(screen,)i(then)e(redra)m(w)g(the)h
+(curren)m(t)f(line,)i(lea)m(ving)g(the)f(curren)m(t)f(line)h(at)g(the)
+630 1534 y(top)c(of)f(the)h(screen.)150 1713 y Ft(redraw-current-line)
+25 b(\(\))630 1823 y Fu(Refresh)30 b(the)g(curren)m(t)h(line.)41
+b(By)30 b(default,)h(this)f(is)h(un)m(b)s(ound.)150 2041
+y Fk(8.4.2)63 b(Commands)42 b(F)-10 b(or)41 b(Manipulating)h(The)f
+(History)150 2223 y Ft(accept-line)27 b(\(Newline)h(or)i(Return\))630
+2333 y Fu(Accept)25 b(the)e(line)h(regardless)g(of)f(where)g(the)h
+(cursor)e(is.)39 b(If)23 b(this)g(line)h(is)f(non-empt)m(y)-8
+b(,)26 b(add)c(it)630 2442 y(to)27 b(the)f(history)g(list)h(according)g
+(to)g(the)f(setting)i(of)e(the)g Ft(HISTCONTROL)d Fu(and)j
+Ft(HISTIGNORE)630 2552 y Fu(v)-5 b(ariables.)42 b(If)30
+b(this)h(line)g(is)g(a)g(mo)s(di\014ed)e(history)i(line,)g(then)f
+(restore)i(the)f(history)f(line)h(to)630 2662 y(its)g(original)g
+(state.)150 2841 y Ft(previous-history)26 b(\(C-p\))630
+2950 y Fu(Mo)m(v)m(e)32 b(`bac)m(k')g(through)e(the)g(history)h(list,)g
+(fetc)m(hing)g(the)g(previous)f(command.)150 3129 y Ft(next-history)d
+(\(C-n\))630 3239 y Fu(Mo)m(v)m(e)32 b(`forw)m(ard')f(through)e(the)i
+(history)f(list,)i(fetc)m(hing)f(the)g(next)f(command.)150
+3418 y Ft(beginning-of-history)25 b(\(M-<\))630 3528
+y Fu(Mo)m(v)m(e)32 b(to)g(the)e(\014rst)g(line)g(in)h(the)f(history)-8
+b(.)150 3707 y Ft(end-of-history)26 b(\(M->\))630 3816
+y Fu(Mo)m(v)m(e)32 b(to)g(the)e(end)g(of)g(the)h(input)e(history)-8
+b(,)31 b(i.e.,)h(the)f(line)f(curren)m(tly)h(b)s(eing)f(en)m(tered.)150
+3995 y Ft(reverse-search-history)24 b(\(C-r\))630 4105
+y Fu(Searc)m(h)31 b(bac)m(kw)m(ard)h(starting)g(at)g(the)f(curren)m(t)g
+(line)g(and)g(mo)m(ving)h(`up')e(through)h(the)g(his-)630
+4215 y(tory)26 b(as)h(necessary)-8 b(.)40 b(This)25 b(is)i(an)f
+(incremen)m(tal)h(searc)m(h.)40 b(This)25 b(command)h(sets)h(the)f
+(region)630 4324 y(to)31 b(the)g(matc)m(hed)g(text)g(and)f(activ)-5
+b(ates)33 b(the)d(mark.)150 4503 y Ft(forward-search-history)24
+b(\(C-s\))630 4613 y Fu(Searc)m(h)44 b(forw)m(ard)f(starting)h(at)h
+(the)e(curren)m(t)h(line)g(and)f(mo)m(ving)h(`do)m(wn')g(through)f(the)
+630 4723 y(history)38 b(as)g(necessary)-8 b(.)65 b(This)38
+b(is)g(an)g(incremen)m(tal)h(searc)m(h.)65 b(This)37
+b(command)h(sets)h(the)630 4832 y(region)31 b(to)g(the)g(matc)m(hed)g
+(text)g(and)f(activ)-5 b(ates)33 b(the)d(mark.)150 5011
+y Ft(non-incremental-reverse-)o(sear)o(ch-h)o(ist)o(ory)24
+b(\(M-p\))630 5121 y Fu(Searc)m(h)31 b(bac)m(kw)m(ard)h(starting)g(at)g
+(the)f(curren)m(t)g(line)g(and)g(mo)m(ving)h(`up')e(through)h(the)g
+(his-)630 5230 y(tory)36 b(as)g(necessary)h(using)e(a)i(non-incremen)m
+(tal)g(searc)m(h)f(for)g(a)g(string)g(supplied)f(b)m(y)h(the)630
+5340 y(user.)k(The)30 b(searc)m(h)h(string)f(ma)m(y)h(matc)m(h)g(an)m
+(ywhere)g(in)f(a)h(history)f(line.)p eop end
+%%Page: 129 135
+TeXDict begin 129 134 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(129)150 299 y Ft
+(non-incremental-forward-)o(sear)o(ch-h)o(ist)o(ory)24
+b(\(M-n\))630 408 y Fu(Searc)m(h)44 b(forw)m(ard)f(starting)h(at)h(the)
+e(curren)m(t)h(line)g(and)f(mo)m(ving)h(`do)m(wn')g(through)f(the)630
+518 y(history)27 b(as)f(necessary)i(using)e(a)h(non-incremen)m(tal)g
+(searc)m(h)h(for)e(a)h(string)g(supplied)e(b)m(y)i(the)630
+628 y(user.)40 b(The)30 b(searc)m(h)h(string)f(ma)m(y)h(matc)m(h)g(an)m
+(ywhere)g(in)f(a)h(history)f(line.)150 784 y Ft(history-search-forward)
+24 b(\(\))630 894 y Fu(Searc)m(h)42 b(forw)m(ard)f(through)f(the)i
+(history)f(for)g(the)h(string)f(of)h(c)m(haracters)h(b)s(et)m(w)m(een)f
+(the)630 1003 y(start)36 b(of)h(the)f(curren)m(t)f(line)i(and)e(the)h
+(p)s(oin)m(t.)58 b(The)35 b(searc)m(h)i(string)e(m)m(ust)h(matc)m(h)h
+(at)g(the)630 1113 y(b)s(eginning)32 b(of)g(a)h(history)g(line.)47
+b(This)32 b(is)h(a)f(non-incremen)m(tal)i(searc)m(h.)48
+b(By)33 b(default,)g(this)630 1223 y(command)d(is)h(un)m(b)s(ound.)150
+1379 y Ft(history-search-backward)24 b(\(\))630 1489
+y Fu(Searc)m(h)35 b(bac)m(kw)m(ard)g(through)f(the)h(history)g(for)g
+(the)f(string)h(of)g(c)m(haracters)h(b)s(et)m(w)m(een)g(the)630
+1598 y(start)g(of)h(the)f(curren)m(t)f(line)i(and)e(the)h(p)s(oin)m(t.)
+58 b(The)35 b(searc)m(h)i(string)e(m)m(ust)h(matc)m(h)h(at)g(the)630
+1708 y(b)s(eginning)32 b(of)g(a)h(history)g(line.)47
+b(This)32 b(is)h(a)f(non-incremen)m(tal)i(searc)m(h.)48
+b(By)33 b(default,)g(this)630 1817 y(command)d(is)h(un)m(b)s(ound.)150
+1974 y Ft(history-substring-search)o(-for)o(ward)24 b(\(\))630
+2084 y Fu(Searc)m(h)42 b(forw)m(ard)f(through)f(the)i(history)f(for)g
+(the)h(string)f(of)h(c)m(haracters)h(b)s(et)m(w)m(een)f(the)630
+2193 y(start)29 b(of)g(the)g(curren)m(t)g(line)g(and)f(the)h(p)s(oin)m
+(t.)40 b(The)29 b(searc)m(h)g(string)g(ma)m(y)g(matc)m(h)h(an)m(ywhere)
+630 2303 y(in)i(a)h(history)g(line.)47 b(This)32 b(is)g(a)h
+(non-incremen)m(tal)h(searc)m(h.)47 b(By)33 b(default,)h(this)e
+(command)630 2412 y(is)e(un)m(b)s(ound.)150 2569 y Ft
+(history-substring-search)o(-bac)o(kwar)o(d)24 b(\(\))630
+2679 y Fu(Searc)m(h)35 b(bac)m(kw)m(ard)g(through)f(the)h(history)g
+(for)g(the)f(string)h(of)g(c)m(haracters)h(b)s(et)m(w)m(een)g(the)630
+2788 y(start)29 b(of)g(the)g(curren)m(t)g(line)g(and)f(the)h(p)s(oin)m
+(t.)40 b(The)29 b(searc)m(h)g(string)g(ma)m(y)g(matc)m(h)h(an)m(ywhere)
+630 2898 y(in)i(a)h(history)g(line.)47 b(This)32 b(is)g(a)h
+(non-incremen)m(tal)h(searc)m(h.)47 b(By)33 b(default,)h(this)e
+(command)630 3007 y(is)e(un)m(b)s(ound.)150 3164 y Ft(yank-nth-arg)d
+(\(M-C-y\))630 3273 y Fu(Insert)37 b(the)g(\014rst)f(argumen)m(t)i(to)f
+(the)h(previous)e(command)h(\(usually)g(the)g(second)g(w)m(ord)630
+3383 y(on)32 b(the)g(previous)f(line\))i(at)f(p)s(oin)m(t.)46
+b(With)32 b(an)g(argumen)m(t)g Fr(n)p Fu(,)g(insert)g(the)g
+Fr(n)p Fu(th)f(w)m(ord)g(from)630 3493 y(the)k(previous)f(command)h
+(\(the)g(w)m(ords)g(in)f(the)h(previous)g(command)f(b)s(egin)h(with)f
+(w)m(ord)630 3602 y(0\).)69 b(A)40 b(negativ)m(e)h(argumen)m(t)f
+(inserts)g(the)f Fr(n)p Fu(th)g(w)m(ord)g(from)g(the)h(end)f(of)h(the)f
+(previous)630 3712 y(command.)48 b(Once)33 b(the)g(argumen)m(t)h
+Fr(n)e Fu(is)h(computed,)h(the)f(argumen)m(t)g(is)g(extracted)i(as)e
+(if)630 3821 y(the)e(`)p Ft(!)p Fj(n)p Fu(')f(history)g(expansion)g
+(had)g(b)s(een)g(sp)s(eci\014ed.)150 3978 y Ft(yank-last-arg)d(\(M-.)i
+(or)h(M-_\))630 4088 y Fu(Insert)k(last)i(argumen)m(t)g(to)g(the)f
+(previous)f(command)h(\(the)h(last)f(w)m(ord)g(of)g(the)g(previous)630
+4197 y(history)e(en)m(try\).)51 b(With)34 b(a)g(n)m(umeric)g(argumen)m
+(t,)h(b)s(eha)m(v)m(e)f(exactly)h(lik)m(e)g Ft(yank-nth-arg)p
+Fu(.)630 4307 y(Successiv)m(e)26 b(calls)g(to)f Ft(yank-last-arg)c
+Fu(mo)m(v)m(e)27 b(bac)m(k)e(through)f(the)h(history)g(list,)i
+(inserting)630 4416 y(the)c(last)g(w)m(ord)f(\(or)h(the)g(w)m(ord)f(sp)
+s(eci\014ed)g(b)m(y)g(the)h(argumen)m(t)g(to)g(the)g(\014rst)f(call\))i
+(of)f(eac)m(h)h(line)630 4526 y(in)36 b(turn.)58 b(An)m(y)36
+b(n)m(umeric)h(argumen)m(t)f(supplied)g(to)h(these)g(successiv)m(e)g
+(calls)h(determines)630 4635 y(the)d(direction)g(to)h(mo)m(v)m(e)g
+(through)e(the)h(history)-8 b(.)54 b(A)35 b(negativ)m(e)i(argumen)m(t)e
+(switc)m(hes)h(the)630 4745 y(direction)23 b(through)g(the)g(history)f
+(\(bac)m(k)i(or)f(forw)m(ard\).)38 b(The)22 b(history)h(expansion)g
+(facilities)630 4855 y(are)28 b(used)f(to)h(extract)h(the)f(last)g
+(argumen)m(t,)h(as)e(if)h(the)g(`)p Ft(!$)p Fu(')f(history)g(expansion)
+h(had)f(b)s(een)630 4964 y(sp)s(eci\014ed.)150 5121 y
+Ft(operate-and-get-next)e(\(C-o\))630 5230 y Fu(Accept)30
+b(the)g(curren)m(t)e(line)i(for)f(return)f(to)h(the)h(calling)g
+(application)h(as)e(if)g(a)h(newline)f(had)630 5340 y(b)s(een)22
+b(en)m(tered,)k(and)d(fetc)m(h)h(the)f(next)g(line)h(relativ)m(e)h(to)f
+(the)f(curren)m(t)g(line)h(from)f(the)g(history)p eop
+end
+%%Page: 130 136
+TeXDict begin 130 135 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(130)630 299 y(for)31
+b(editing.)43 b(A)31 b(n)m(umeric)f(argumen)m(t,)i(if)f(supplied,)f(sp)
+s(eci\014es)h(the)g(history)f(en)m(try)i(to)f(use)630
+408 y(instead)g(of)f(the)h(curren)m(t)f(line.)150 605
+y Fk(8.4.3)63 b(Commands)42 b(F)-10 b(or)41 b(Changing)g(T)-10
+b(ext)150 775 y Fj(end-of-file)27 b Ft(\(usually)h(C-d\))630
+885 y Fu(The)e(c)m(haracter)h(indicating)h(end-of-\014le)e(as)h(set,)g
+(for)f(example,)i(b)m(y)e Ft(stty)p Fu(.)39 b(If)25 b(this)h(c)m
+(harac-)630 995 y(ter)c(is)g(read)g(when)e(there)i(are)h(no)e(c)m
+(haracters)j(on)d(the)h(line,)i(and)d(p)s(oin)m(t)h(is)g(at)h(the)f(b)s
+(eginning)630 1104 y(of)31 b(the)f(line,)h(Readline)g(in)m(terprets)g
+(it)g(as)f(the)h(end)f(of)g(input)f(and)h(returns)f Fm(eof)p
+Fu(.)150 1261 y Ft(delete-char)e(\(C-d\))630 1370 y Fu(Delete)35
+b(the)f(c)m(haracter)h(at)f(p)s(oin)m(t.)49 b(If)33 b(this)g(function)g
+(is)g(b)s(ound)e(to)j(the)g(same)f(c)m(haracter)630 1480
+y(as)e(the)f(tt)m(y)i Fm(eof)d Fu(c)m(haracter,)j(as)f
+Fj(C-d)e Fu(commonly)i(is,)g(see)g(ab)s(o)m(v)m(e)h(for)e(the)g
+(e\013ects.)150 1637 y Ft(backward-delete-char)25 b(\(Rubout\))630
+1746 y Fu(Delete)32 b(the)f(c)m(haracter)g(b)s(ehind)e(the)h(cursor.)40
+b(A)30 b(n)m(umeric)g(argumen)m(t)h(means)f(to)h(kill)g(the)630
+1856 y(c)m(haracters)h(instead)e(of)h(deleting)g(them.)150
+2013 y Ft(forward-backward-delete-)o(char)24 b(\(\))630
+2122 y Fu(Delete)40 b(the)f(c)m(haracter)h(under)c(the)j(cursor,)h
+(unless)d(the)i(cursor)e(is)h(at)h(the)g(end)e(of)i(the)630
+2232 y(line,)33 b(in)e(whic)m(h)g(case)i(the)f(c)m(haracter)h(b)s
+(ehind)d(the)i(cursor)f(is)g(deleted.)46 b(By)32 b(default,)g(this)630
+2341 y(is)e(not)h(b)s(ound)d(to)j(a)g(k)m(ey)-8 b(.)150
+2498 y Ft(quoted-insert)27 b(\(C-q)i(or)h(C-v\))630 2608
+y Fu(Add)j(the)i(next)f(c)m(haracter)i(t)m(yp)s(ed)e(to)h(the)f(line)h
+(v)m(erbatim.)53 b(This)33 b(is)i(ho)m(w)f(to)h(insert)f(k)m(ey)630
+2717 y(sequences)d(lik)m(e)g Fj(C-q)p Fu(,)f(for)g(example.)150
+2874 y Ft(self-insert)d(\(a,)j(b,)g(A,)f(1,)h(!,)g(...)o(\))630
+2983 y Fu(Insert)g(y)m(ourself.)150 3140 y Ft(bracketed-paste-begin)25
+b(\(\))630 3250 y Fu(This)f(function)h(is)f(in)m(tended)h(to)h(b)s(e)e
+(b)s(ound)f(to)i(the)g Ft(")p Fu(brac)m(k)m(eted)h(paste)p
+Ft(")f Fu(escap)s(e)h(sequence)630 3359 y(sen)m(t)38
+b(b)m(y)f(some)h(terminals,)i(and)d(suc)m(h)g(a)h(binding)e(is)i
+(assigned)f(b)m(y)h(default.)62 b(It)38 b(allo)m(ws)630
+3469 y(Readline)33 b(to)g(insert)g(the)f(pasted)h(text)g(as)g(a)g
+(single)g(unit)f(without)h(treating)h(eac)m(h)f(c)m(har-)630
+3578 y(acter)40 b(as)f(if)g(it)g(had)f(b)s(een)g(read)h(from)f(the)h(k)
+m(eyb)s(oard.)66 b(The)39 b(c)m(haracters)h(are)f(inserted)630
+3688 y(as)44 b(if)g(eac)m(h)i(one)e(w)m(as)g(b)s(ound)e(to)j
+Ft(self-insert)c Fu(instead)j(of)h(executing)g(an)m(y)f(editing)630
+3798 y(commands.)630 3931 y(Brac)m(k)m(eted)38 b(paste)f(sets)f(the)h
+(region)f(\(the)h(c)m(haracters)g(b)s(et)m(w)m(een)g(p)s(oin)m(t)f(and)
+g(the)g(mark\))630 4040 y(to)j(the)g(inserted)f(text.)65
+b(It)39 b(uses)f(the)g(concept)h(of)g(an)f Fl(active)i(mark)10
+b Fu(:)57 b(when)38 b(the)g(mark)630 4150 y(is)d(activ)m(e,)k(Readline)
+c(redispla)m(y)h(uses)e(the)h(terminal's)h(standout)f(mo)s(de)f(to)i
+(denote)g(the)630 4260 y(region.)150 4416 y Ft(transpose-chars)26
+b(\(C-t\))630 4526 y Fu(Drag)33 b(the)f(c)m(haracter)h(b)s(efore)f(the)
+g(cursor)f(forw)m(ard)h(o)m(v)m(er)h(the)f(c)m(haracter)i(at)e(the)g
+(cursor,)630 4635 y(mo)m(ving)k(the)g(cursor)f(forw)m(ard)g(as)g(w)m
+(ell.)57 b(If)35 b(the)h(insertion)g(p)s(oin)m(t)f(is)g(at)i(the)e(end)
+g(of)h(the)630 4745 y(line,)24 b(then)e(this)g(transp)s(oses)f(the)h
+(last)h(t)m(w)m(o)g(c)m(haracters)g(of)f(the)h(line.)38
+b(Negativ)m(e)25 b(argumen)m(ts)630 4855 y(ha)m(v)m(e)32
+b(no)e(e\013ect.)150 5011 y Ft(transpose-words)c(\(M-t\))630
+5121 y Fu(Drag)33 b(the)g(w)m(ord)f(b)s(efore)g(p)s(oin)m(t)g(past)g
+(the)h(w)m(ord)f(after)g(p)s(oin)m(t,)i(mo)m(ving)f(p)s(oin)m(t)f(past)
+g(that)630 5230 y(w)m(ord)c(as)h(w)m(ell.)41 b(If)27
+b(the)i(insertion)f(p)s(oin)m(t)h(is)f(at)h(the)g(end)e(of)i(the)f
+(line,)i(this)e(transp)s(oses)g(the)630 5340 y(last)j(t)m(w)m(o)h(w)m
+(ords)e(on)g(the)h(line.)p eop end
+%%Page: 131 137
+TeXDict begin 131 136 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(131)150 299 y Ft(upcase-word)27
+b(\(M-u\))630 408 y Fu(Upp)s(ercase)32 b(the)g(curren)m(t)g(\(or)g
+(follo)m(wing\))i(w)m(ord.)45 b(With)32 b(a)g(negativ)m(e)j(argumen)m
+(t,)e(upp)s(er-)630 518 y(case)e(the)g(previous)f(w)m(ord,)g(but)g(do)g
+(not)h(mo)m(v)m(e)h(the)e(cursor.)150 665 y Ft(downcase-word)d(\(M-l\))
+630 775 y Fu(Lo)m(w)m(ercase)c(the)f(curren)m(t)f(\(or)h(follo)m
+(wing\))i(w)m(ord.)37 b(With)22 b(a)g(negativ)m(e)i(argumen)m(t,)g(lo)m
+(w)m(ercase)630 884 y(the)31 b(previous)e(w)m(ord,)i(but)e(do)i(not)f
+(mo)m(v)m(e)i(the)f(cursor.)150 1032 y Ft(capitalize-word)26
+b(\(M-c\))630 1141 y Fu(Capitalize)d(the)f(curren)m(t)f(\(or)g(follo)m
+(wing\))i(w)m(ord.)38 b(With)21 b(a)h(negativ)m(e)h(argumen)m(t,)h
+(capitalize)630 1251 y(the)31 b(previous)e(w)m(ord,)i(but)e(do)i(not)f
+(mo)m(v)m(e)i(the)f(cursor.)150 1398 y Ft(overwrite-mode)26
+b(\(\))630 1508 y Fu(T)-8 b(oggle)35 b(o)m(v)m(erwrite)g(mo)s(de.)48
+b(With)33 b(an)g(explicit)h(p)s(ositiv)m(e)g(n)m(umeric)f(argumen)m(t,)
+h(switc)m(hes)630 1617 y(to)22 b(o)m(v)m(erwrite)i(mo)s(de.)37
+b(With)22 b(an)g(explicit)h(non-p)s(ositiv)m(e)f(n)m(umeric)g(argumen)m
+(t,)i(switc)m(hes)e(to)630 1727 y(insert)30 b(mo)s(de.)41
+b(This)30 b(command)h(a\013ects)h(only)e Ft(emacs)f Fu(mo)s(de;)i
+Ft(vi)f Fu(mo)s(de)g(do)s(es)g(o)m(v)m(erwrite)630 1837
+y(di\013eren)m(tly)-8 b(.)42 b(Eac)m(h)31 b(call)h(to)f
+Ft(readline\(\))c Fu(starts)k(in)f(insert)g(mo)s(de.)630
+1965 y(In)52 b(o)m(v)m(erwrite)h(mo)s(de,)58 b(c)m(haracters)c(b)s
+(ound)c(to)j Ft(self-insert)c Fu(replace)k(the)g(text)g(at)630
+2075 y(p)s(oin)m(t)59 b(rather)f(than)h(pushing)e(the)i(text)g(to)h
+(the)f(righ)m(t.)126 b(Characters)59 b(b)s(ound)d(to)630
+2184 y Ft(backward-delete-char)25 b Fu(replace)31 b(the)g(c)m(haracter)
+h(b)s(efore)e(p)s(oin)m(t)g(with)g(a)h(space.)630 2313
+y(By)g(default,)f(this)h(command)f(is)g(un)m(b)s(ound.)150
+2500 y Fk(8.4.4)63 b(Killing)42 b(And)e(Y)-10 b(anking)150
+2665 y Ft(kill-line)28 b(\(C-k\))630 2775 y Fu(Kill)k(the)f(text)i
+(from)d(p)s(oin)m(t)i(to)g(the)f(end)g(of)g(the)h(line.)44
+b(With)31 b(a)h(negativ)m(e)i(n)m(umeric)d(argu-)630
+2885 y(men)m(t,)g(kill)g(bac)m(kw)m(ard)g(from)f(the)g(cursor)g(to)h
+(the)g(b)s(eginning)e(of)i(the)g(curren)m(t)f(line.)150
+3032 y Ft(backward-kill-line)25 b(\(C-x)30 b(Rubout\))630
+3141 y Fu(Kill)40 b(bac)m(kw)m(ard)h(from)e(the)h(cursor)g(to)g(the)g
+(b)s(eginning)g(of)g(the)g(curren)m(t)f(line.)70 b(With)41
+b(a)630 3251 y(negativ)m(e)47 b(n)m(umeric)e(argumen)m(t,)50
+b(kill)c(forw)m(ard)e(from)h(the)g(cursor)g(to)h(the)f(end)f(of)i(the)
+630 3361 y(curren)m(t)30 b(line.)150 3508 y Ft(unix-line-discard)c
+(\(C-u\))630 3617 y Fu(Kill)31 b(bac)m(kw)m(ard)g(from)e(the)i(cursor)f
+(to)h(the)f(b)s(eginning)g(of)h(the)f(curren)m(t)g(line.)150
+3765 y Ft(kill-whole-line)c(\(\))630 3874 y Fu(Kill)37
+b(all)g(c)m(haracters)h(on)f(the)f(curren)m(t)h(line,)h(no)f(matter)g
+(where)f(p)s(oin)m(t)h(is.)59 b(By)36 b(default,)630
+3984 y(this)30 b(is)h(un)m(b)s(ound.)150 4131 y Ft(kill-word)d(\(M-d\))
+630 4241 y Fu(Kill)i(from)f(p)s(oin)m(t)g(to)h(the)g(end)e(of)i(the)f
+(curren)m(t)h(w)m(ord,)f(or)g(if)h(b)s(et)m(w)m(een)g(w)m(ords,)f(to)h
+(the)g(end)630 4350 y(of)h(the)f(next)h(w)m(ord.)40 b(W)-8
+b(ord)31 b(b)s(oundaries)e(are)h(the)h(same)g(as)f Ft(forward-word)p
+Fu(.)150 4498 y Ft(backward-kill-word)25 b(\(M-DEL\))630
+4607 y Fu(Kill)k(the)g(w)m(ord)g(b)s(ehind)e(p)s(oin)m(t.)40
+b(W)-8 b(ord)29 b(b)s(oundaries)f(are)h(the)g(same)g(as)g
+Ft(backward-word)p Fu(.)150 4754 y Ft(shell-kill-word)d(\(M-C-d\))630
+4864 y Fu(Kill)k(from)f(p)s(oin)m(t)g(to)h(the)g(end)e(of)i(the)f
+(curren)m(t)h(w)m(ord,)f(or)g(if)h(b)s(et)m(w)m(een)g(w)m(ords,)f(to)h
+(the)g(end)630 4974 y(of)h(the)f(next)h(w)m(ord.)40 b(W)-8
+b(ord)31 b(b)s(oundaries)e(are)h(the)h(same)g(as)f Ft
+(shell-forward-word)p Fu(.)150 5121 y Ft(shell-backward-kill-word)24
+b(\(\))630 5230 y Fu(Kill)e(the)h(w)m(ord)e(b)s(ehind)g(p)s(oin)m(t.)38
+b(W)-8 b(ord)22 b(b)s(oundaries)f(are)h(the)g(same)h(as)f
+Ft(shell-backward-)630 5340 y(word)p Fu(.)p eop end
+%%Page: 132 138
+TeXDict begin 132 137 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(132)150 299 y Ft
+(shell-transpose-words)25 b(\(M-C-t\))630 408 y Fu(Drag)33
+b(the)g(w)m(ord)f(b)s(efore)g(p)s(oin)m(t)g(past)g(the)h(w)m(ord)f
+(after)g(p)s(oin)m(t,)i(mo)m(ving)f(p)s(oin)m(t)f(past)g(that)630
+518 y(w)m(ord)c(as)h(w)m(ell.)41 b(If)27 b(the)i(insertion)f(p)s(oin)m
+(t)h(is)f(at)h(the)g(end)e(of)i(the)f(line,)i(this)e(transp)s(oses)g
+(the)630 628 y(last)j(t)m(w)m(o)h(w)m(ords)d(on)i(the)f(line.)41
+b(W)-8 b(ord)31 b(b)s(oundaries)e(are)h(the)h(same)f(as)h
+Ft(shell-forward-)630 737 y(word)e Fu(and)h Ft(shell-backward-word)p
+Fu(.)150 897 y Ft(unix-word-rubout)c(\(C-w\))630 1007
+y Fu(Kill)32 b(the)g(w)m(ord)f(b)s(ehind)f(p)s(oin)m(t,)i(using)f
+(white)h(space)g(as)g(a)g(w)m(ord)f(b)s(oundary)-8 b(.)43
+b(The)31 b(killed)630 1116 y(text)g(is)g(sa)m(v)m(ed)g(on)g(the)f
+(kill-ring.)150 1277 y Ft(unix-filename-rubout)25 b(\(\))630
+1386 y Fu(Kill)37 b(the)f(w)m(ord)g(b)s(ehind)f(p)s(oin)m(t,)j(using)e
+(white)g(space)h(and)f(the)g(slash)g(c)m(haracter)i(as)f(the)630
+1496 y(w)m(ord)30 b(b)s(oundaries.)39 b(The)30 b(killed)h(text)g(is)g
+(sa)m(v)m(ed)g(on)g(the)f(kill-ring.)150 1656 y Ft
+(delete-horizontal-space)24 b(\(\))630 1765 y Fu(Delete)33
+b(all)e(spaces)g(and)e(tabs)i(around)e(p)s(oin)m(t.)41
+b(By)31 b(default,)f(this)h(is)f(un)m(b)s(ound.)150 1925
+y Ft(kill-region)d(\(\))630 2035 y Fu(Kill)k(the)f(text)i(in)e(the)g
+(curren)m(t)h(region.)41 b(By)31 b(default,)f(this)h(command)f(is)g(un)
+m(b)s(ound.)150 2195 y Ft(copy-region-as-kill)25 b(\(\))630
+2305 y Fu(Cop)m(y)34 b(the)g(text)h(in)f(the)g(region)g(to)h(the)f
+(kill)h(bu\013er,)f(so)g(it)h(can)f(b)s(e)f(y)m(ank)m(ed)i(righ)m(t)f
+(a)m(w)m(a)m(y)-8 b(.)630 2414 y(By)31 b(default,)f(this)h(command)f
+(is)g(un)m(b)s(ound.)150 2574 y Ft(copy-backward-word)25
+b(\(\))630 2684 y Fu(Cop)m(y)38 b(the)h(w)m(ord)f(b)s(efore)g(p)s(oin)m
+(t)g(to)i(the)e(kill)h(bu\013er.)64 b(The)38 b(w)m(ord)g(b)s(oundaries)
+f(are)i(the)630 2793 y(same)31 b(as)f Ft(backward-word)p
+Fu(.)38 b(By)30 b(default,)h(this)f(command)g(is)h(un)m(b)s(ound.)150
+2953 y Ft(copy-forward-word)26 b(\(\))630 3063 y Fu(Cop)m(y)31
+b(the)g(w)m(ord)g(follo)m(wing)h(p)s(oin)m(t)f(to)h(the)f(kill)h
+(bu\013er.)42 b(The)30 b(w)m(ord)h(b)s(oundaries)e(are)j(the)630
+3173 y(same)f(as)f Ft(forward-word)p Fu(.)38 b(By)30
+b(default,)h(this)g(command)f(is)g(un)m(b)s(ound.)150
+3333 y Ft(yank)f(\(C-y\))630 3442 y Fu(Y)-8 b(ank)31
+b(the)f(top)h(of)g(the)f(kill)h(ring)f(in)m(to)i(the)e(bu\013er)g(at)h
+(p)s(oin)m(t.)150 3602 y Ft(yank-pop)d(\(M-y\))630 3712
+y Fu(Rotate)36 b(the)f(kill-ring,)i(and)d(y)m(ank)h(the)f(new)g(top.)54
+b(Y)-8 b(ou)35 b(can)g(only)f(do)h(this)f(if)h(the)g(prior)630
+3822 y(command)30 b(is)h Ft(yank)e Fu(or)h Ft(yank-pop)p
+Fu(.)150 4021 y Fk(8.4.5)63 b(Sp)s(ecifying)42 b(Numeric)f(Argumen)m
+(ts)150 4194 y Ft(digit-argument)26 b(\()p Fj(M-0)p Ft(,)j
+Fj(M-1)p Ft(,)h(...)f Fj(M--)p Ft(\))630 4303 y Fu(Add)d(this)h(digit)g
+(to)h(the)f(argumen)m(t)g(already)h(accum)m(ulating,)h(or)e(start)h(a)f
+(new)f(argumen)m(t.)630 4413 y Fj(M--)j Fu(starts)i(a)g(negativ)m(e)i
+(argumen)m(t.)150 4573 y Ft(universal-argument)25 b(\(\))630
+4682 y Fu(This)g(is)g(another)h(w)m(a)m(y)g(to)h(sp)s(ecify)e(an)g
+(argumen)m(t.)40 b(If)25 b(this)g(command)h(is)f(follo)m(w)m(ed)i(b)m
+(y)f(one)630 4792 y(or)k(more)f(digits,)i(optionally)g(with)e(a)h
+(leading)h(min)m(us)e(sign,)h(those)g(digits)g(de\014ne)f(the)h(ar-)630
+4902 y(gumen)m(t.)41 b(If)28 b(the)i(command)f(is)g(follo)m(w)m(ed)h(b)
+m(y)f(digits,)i(executing)f Ft(universal-argument)630
+5011 y Fu(again)j(ends)e(the)h(n)m(umeric)f(argumen)m(t,)i(but)e(is)h
+(otherwise)g(ignored.)45 b(As)32 b(a)g(sp)s(ecial)h(case,)630
+5121 y(if)g(this)g(command)f(is)h(immediately)h(follo)m(w)m(ed)h(b)m(y)
+d(a)h(c)m(haracter)i(that)e(is)g(neither)g(a)g(digit)630
+5230 y(nor)41 b(min)m(us)f(sign,)k(the)e(argumen)m(t)f(coun)m(t)h(for)f
+(the)h(next)f(command)g(is)g(m)m(ultiplied)h(b)m(y)630
+5340 y(four.)54 b(The)35 b(argumen)m(t)g(coun)m(t)h(is)f(initially)h
+(one,)h(so)e(executing)i(this)e(function)f(the)i(\014rst)p
+eop end
+%%Page: 133 139
+TeXDict begin 133 138 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(133)630 299 y(time)29
+b(mak)m(es)h(the)e(argumen)m(t)i(coun)m(t)f(four,)f(a)h(second)g(time)g
+(mak)m(es)h(the)e(argumen)m(t)h(coun)m(t)630 408 y(sixteen,)i(and)f(so)
+h(on.)40 b(By)31 b(default,)g(this)f(is)g(not)h(b)s(ound)d(to)k(a)e(k)m
+(ey)-8 b(.)150 603 y Fk(8.4.6)63 b(Letting)40 b(Readline)h(T)m(yp)s(e)g
+(F)-10 b(or)42 b(Y)-10 b(ou)150 772 y Ft(complete)28
+b(\(TAB\))630 882 y Fu(A)m(ttempt)c(to)f(p)s(erform)e(completion)j(on)f
+(the)g(text)g(b)s(efore)f(p)s(oin)m(t.)39 b(The)22 b(actual)i
+(completion)630 991 y(p)s(erformed)33 b(is)h(application-sp)s
+(eci\014c.)53 b(Bash)35 b(attempts)g(completion)g(treating)h(the)e
+(text)630 1101 y(as)39 b(a)h(v)-5 b(ariable)39 b(\(if)h(the)f(text)h(b)
+s(egins)e(with)h(`)p Ft($)p Fu('\),)j(username)c(\(if)i(the)f(text)h(b)
+s(egins)e(with)630 1210 y(`)p Ft(~)p Fu('\),)31 b(hostname)f(\(if)g
+(the)g(text)h(b)s(egins)e(with)h(`)p Ft(@)p Fu('\),)h(or)f(command)f
+(\(including)h(aliases)i(and)630 1320 y(functions\))j(in)f(turn.)53
+b(If)34 b(none)g(of)h(these)h(pro)s(duces)d(a)i(matc)m(h,)i(\014lename)
+e(completion)h(is)630 1430 y(attempted.)150 1584 y Ft
+(possible-completions)25 b(\(M-?\))630 1694 y Fu(List)35
+b(the)g(p)s(ossible)f(completions)i(of)e(the)h(text)h(b)s(efore)e(p)s
+(oin)m(t.)54 b(When)34 b(displa)m(ying)h(com-)630 1803
+y(pletions,)f(Readline)f(sets)f(the)h(n)m(um)m(b)s(er)e(of)i(columns)f
+(used)f(for)i(displa)m(y)f(to)h(the)g(v)-5 b(alue)33
+b(of)630 1913 y Ft(completion-display-width)o Fu(,)g(the)j(v)-5
+b(alue)37 b(of)g(the)f(en)m(vironmen)m(t)h(v)-5 b(ariable)38
+b Ft(COLUMNS)p Fu(,)630 2022 y(or)30 b(the)h(screen)f(width,)g(in)g
+(that)h(order.)150 2177 y Ft(insert-completions)25 b(\(M-*\))630
+2286 y Fu(Insert)30 b(all)h(completions)h(of)f(the)g(text)g(b)s(efore)f
+(p)s(oin)m(t)h(that)g(w)m(ould)f(ha)m(v)m(e)i(b)s(een)e(generated)630
+2396 y(b)m(y)g Ft(possible-completions)p Fu(.)150 2550
+y Ft(menu-complete)d(\(\))630 2660 y Fu(Similar)d(to)g
+Ft(complete)p Fu(,)f(but)h(replaces)g(the)g(w)m(ord)g(to)g(b)s(e)f
+(completed)i(with)e(a)i(single)f(matc)m(h)630 2770 y(from)37
+b(the)h(list)h(of)f(p)s(ossible)f(completions.)64 b(Rep)s(eated)39
+b(execution)g(of)f Ft(menu-complete)630 2879 y Fu(steps)i(through)g
+(the)g(list)h(of)f(p)s(ossible)g(completions,)k(inserting)c(eac)m(h)i
+(matc)m(h)f(in)f(turn.)630 2989 y(A)m(t)e(the)f(end)f(of)h(the)g(list)g
+(of)g(completions,)i(the)e(b)s(ell)g(is)g(rung)f(\(sub)5
+b(ject)36 b(to)i(the)f(setting)630 3098 y(of)f Ft(bell-style)p
+Fu(\))e(and)h(the)h(original)i(text)f(is)f(restored.)57
+b(An)36 b(argumen)m(t)h(of)f Fr(n)f Fu(mo)m(v)m(es)i
+Fr(n)630 3208 y Fu(p)s(ositions)e(forw)m(ard)f(in)g(the)h(list)h(of)e
+(matc)m(hes;)39 b(a)c(negativ)m(e)i(argumen)m(t)e(ma)m(y)g(b)s(e)f
+(used)g(to)630 3318 y(mo)m(v)m(e)40 b(bac)m(kw)m(ard)e(through)g(the)g
+(list.)65 b(This)38 b(command)g(is)g(in)m(tended)g(to)h(b)s(e)f(b)s
+(ound)e(to)630 3427 y Ft(TAB)p Fu(,)30 b(but)f(is)i(un)m(b)s(ound)d(b)m
+(y)i(default.)150 3582 y Ft(menu-complete-backward)24
+b(\(\))630 3691 y Fu(Iden)m(tical)36 b(to)g Ft(menu-complete)p
+Fu(,)d(but)h(mo)m(v)m(es)j(bac)m(kw)m(ard)e(through)f(the)i(list)f(of)g
+(p)s(ossible)630 3801 y(completions,)d(as)e(if)h Ft(menu-complete)26
+b Fu(had)k(b)s(een)g(giv)m(en)h(a)g(negativ)m(e)i(argumen)m(t.)150
+3955 y Ft(delete-char-or-list)25 b(\(\))630 4065 y Fu(Deletes)41
+b(the)e(c)m(haracter)h(under)e(the)h(cursor)f(if)h(not)g(at)g(the)h(b)s
+(eginning)e(or)h(end)f(of)h(the)630 4174 y(line)50 b(\(lik)m(e)h
+Ft(delete-char)p Fu(\).)96 b(If)49 b(at)h(the)g(end)f(of)h(the)f(line,)
+55 b(b)s(eha)m(v)m(es)c(iden)m(tically)g(to)630 4284
+y Ft(possible-completions)p Fu(.)35 b(This)30 b(command)g(is)g(un)m(b)s
+(ound)e(b)m(y)i(default.)150 4438 y Ft(complete-filename)c(\(M-/\))630
+4548 y Fu(A)m(ttempt)32 b(\014lename)e(completion)i(on)e(the)h(text)g
+(b)s(efore)f(p)s(oin)m(t.)150 4702 y Ft(possible-filename-comple)o
+(tion)o(s)24 b(\(C-x)30 b(/\))630 4812 y Fu(List)f(the)g(p)s(ossible)f
+(completions)h(of)g(the)g(text)g(b)s(efore)g(p)s(oin)m(t,)g(treating)h
+(it)f(as)g(a)f(\014lename.)150 4966 y Ft(complete-username)e(\(M-~\))
+630 5076 y Fu(A)m(ttempt)32 b(completion)f(on)g(the)f(text)i(b)s(efore)
+e(p)s(oin)m(t,)g(treating)i(it)f(as)f(a)h(username.)150
+5230 y Ft(possible-username-comple)o(tion)o(s)24 b(\(C-x)30
+b(~\))630 5340 y Fu(List)25 b(the)g(p)s(ossible)g(completions)h(of)f
+(the)g(text)h(b)s(efore)f(p)s(oin)m(t,)h(treating)g(it)g(as)f(a)g
+(username.)p eop end
+%%Page: 134 140
+TeXDict begin 134 139 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(134)150 299 y Ft
+(complete-variable)26 b(\(M-$\))630 408 y Fu(A)m(ttempt)32
+b(completion)f(on)g(the)f(text)i(b)s(efore)e(p)s(oin)m(t,)g(treating)i
+(it)f(as)f(a)h(shell)g(v)-5 b(ariable.)150 589 y Ft
+(possible-variable-comple)o(tion)o(s)24 b(\(C-x)30 b($\))630
+699 y Fu(List)42 b(the)g(p)s(ossible)g(completions)h(of)f(the)g(text)h
+(b)s(efore)e(p)s(oin)m(t,)46 b(treating)d(it)f(as)g(a)h(shell)630
+809 y(v)-5 b(ariable.)150 989 y Ft(complete-hostname)26
+b(\(M-@\))630 1099 y Fu(A)m(ttempt)32 b(completion)f(on)g(the)f(text)i
+(b)s(efore)e(p)s(oin)m(t,)g(treating)i(it)f(as)f(a)h(hostname.)150
+1280 y Ft(possible-hostname-comple)o(tion)o(s)24 b(\(C-x)30
+b(@\))630 1390 y Fu(List)25 b(the)g(p)s(ossible)f(completions)h(of)g
+(the)g(text)g(b)s(efore)g(p)s(oin)m(t,)h(treating)g(it)f(as)f(a)h
+(hostname.)150 1570 y Ft(complete-command)h(\(M-!\))630
+1680 y Fu(A)m(ttempt)32 b(completion)g(on)f(the)g(text)h(b)s(efore)e(p)
+s(oin)m(t,)h(treating)h(it)g(as)f(a)g(command)g(name.)630
+1790 y(Command)46 b(completion)i(attempts)g(to)f(matc)m(h)h(the)f(text)
+h(against)g(aliases,)53 b(reserv)m(ed)630 1899 y(w)m(ords,)36
+b(shell)g(functions,)h(shell)e(builtins,)i(and)e(\014nally)g
+(executable)i(\014lenames,)g(in)e(that)630 2009 y(order.)150
+2190 y Ft(possible-command-complet)o(ions)24 b(\(C-x)29
+b(!\))630 2299 y Fu(List)d(the)h(p)s(ossible)f(completions)h(of)f(the)h
+(text)g(b)s(efore)f(p)s(oin)m(t,)h(treating)g(it)g(as)g(a)f(command)630
+2409 y(name.)150 2590 y Ft(dynamic-complete-history)e(\(M-TAB\))630
+2699 y Fu(A)m(ttempt)31 b(completion)h(on)e(the)g(text)h(b)s(efore)f(p)
+s(oin)m(t,)g(comparing)h(the)f(text)h(against)h(lines)630
+2809 y(from)e(the)g(history)h(list)g(for)f(p)s(ossible)g(completion)i
+(matc)m(hes.)150 2990 y Ft(dabbrev-expand)26 b(\(\))630
+3099 y Fu(A)m(ttempt)i(men)m(u)e(completion)i(on)f(the)g(text)g(b)s
+(efore)f(p)s(oin)m(t,)i(comparing)f(the)g(text)h(against)630
+3209 y(lines)j(from)e(the)i(history)f(list)h(for)g(p)s(ossible)e
+(completion)j(matc)m(hes.)150 3390 y Ft(complete-into-braces)25
+b(\(M-{\))630 3500 y Fu(P)m(erform)f(\014lename)f(completion)i(and)f
+(insert)f(the)h(list)g(of)g(p)s(ossible)f(completions)i(enclosed)630
+3609 y(within)34 b(braces)h(so)f(the)h(list)g(is)g(a)m(v)-5
+b(ailable)37 b(to)e(the)g(shell)g(\(see)g(Section)h(3.5.1)g([Brace)g
+(Ex-)630 3719 y(pansion],)30 b(page)h(23\).)150 3939
+y Fk(8.4.7)63 b(Keyb)s(oard)41 b(Macros)150 4122 y Ft(start-kbd-macro)
+26 b(\(C-x)j(\(\))630 4232 y Fu(Begin)i(sa)m(ving)h(the)e(c)m
+(haracters)i(t)m(yp)s(ed)e(in)m(to)h(the)g(curren)m(t)f(k)m(eyb)s(oard)
+g(macro.)150 4413 y Ft(end-kbd-macro)d(\(C-x)i(\)\))630
+4522 y Fu(Stop)e(sa)m(ving)h(the)g(c)m(haracters)g(t)m(yp)s(ed)f(in)m
+(to)i(the)e(curren)m(t)g(k)m(eyb)s(oard)g(macro)h(and)f(sa)m(v)m(e)i
+(the)630 4632 y(de\014nition.)150 4813 y Ft(call-last-kbd-macro)c
+(\(C-x)k(e\))630 4922 y Fu(Re-execute)37 b(the)e(last)h(k)m(eyb)s(oard)
+f(macro)h(de\014ned,)f(b)m(y)h(making)f(the)g(c)m(haracters)i(in)e(the)
+630 5032 y(macro)c(app)s(ear)f(as)g(if)h(t)m(yp)s(ed)f(at)h(the)f(k)m
+(eyb)s(oard.)150 5213 y Ft(print-last-kbd-macro)25 b(\(\))630
+5322 y Fu(Prin)m(t)30 b(the)h(last)g(k)m(eb)s(oard)f(macro)h(de\014ned)
+e(in)i(a)f(format)h(suitable)g(for)f(the)h Fr(inputrc)k
+Fu(\014le.)p eop end
+%%Page: 135 141
+TeXDict begin 135 140 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(135)150 299 y Fk(8.4.8)63
+b(Some)41 b(Miscellaneous)i(Commands)150 478 y Ft(re-read-init-file)26
+b(\(C-x)j(C-r\))630 587 y Fu(Read)22 b(in)g(the)g(con)m(ten)m(ts)h(of)f
+(the)g Fr(inputrc)27 b Fu(\014le,)d(and)d(incorp)s(orate)h(an)m(y)h
+(bindings)d(or)i(v)-5 b(ariable)630 697 y(assignmen)m(ts)31
+b(found)e(there.)150 870 y Ft(abort)g(\(C-g\))630 979
+y Fu(Ab)s(ort)d(the)h(curren)m(t)f(editing)h(command)f(and)g(ring)h
+(the)f(terminal's)h(b)s(ell)g(\(sub)5 b(ject)26 b(to)i(the)630
+1089 y(setting)j(of)g Ft(bell-style)p Fu(\).)150 1262
+y Ft(do-lowercase-version)25 b(\(M-A,)k(M-B,)g(M-)p Fj(x)p
+Ft(,)g(...)o(\))630 1372 y Fu(If)35 b(the)g(meta\014ed)g(c)m(haracter)i
+Fr(x)k Fu(is)35 b(upp)s(er)e(case,)k(run)d(the)h(command)g(that)g(is)g
+(b)s(ound)e(to)630 1481 y(the)g(corresp)s(onding)f(meta\014ed)h(lo)m(w)
+m(er)i(case)f(c)m(haracter.)50 b(The)32 b(b)s(eha)m(vior)h(is)g
+(unde\014ned)e(if)630 1591 y Fr(x)37 b Fu(is)30 b(already)h(lo)m(w)m
+(er)h(case.)150 1764 y Ft(prefix-meta)27 b(\(ESC\))630
+1873 y Fu(Metafy)39 b(the)e(next)h(c)m(haracter)h(t)m(yp)s(ed.)62
+b(This)37 b(is)g(for)h(k)m(eyb)s(oards)f(without)g(a)h(meta)g(k)m(ey)-8
+b(.)630 1983 y(T)m(yping)30 b(`)p Ft(ESC)g(f)p Fu(')g(is)h(equiv)-5
+b(alen)m(t)31 b(to)g(t)m(yping)g Fj(M-f)p Fu(.)150 2156
+y Ft(undo)e(\(C-_)g(or)h(C-x)g(C-u\))630 2266 y Fu(Incremen)m(tal)h
+(undo,)f(separately)h(remem)m(b)s(ered)f(for)g(eac)m(h)i(line.)150
+2439 y Ft(revert-line)27 b(\(M-r\))630 2548 y Fu(Undo)33
+b(all)h(c)m(hanges)g(made)f(to)h(this)f(line.)49 b(This)32
+b(is)h(lik)m(e)i(executing)f(the)f Ft(undo)f Fu(command)630
+2658 y(enough)e(times)h(to)g(get)h(bac)m(k)f(to)g(the)f(b)s(eginning.)
+150 2831 y Ft(tilde-expand)d(\(M-&\))630 2940 y Fu(P)m(erform)j(tilde)h
+(expansion)g(on)f(the)g(curren)m(t)h(w)m(ord.)150 3114
+y Ft(set-mark)d(\(C-@\))630 3223 y Fu(Set)33 b(the)g(mark)f(to)i(the)f
+(p)s(oin)m(t.)48 b(If)32 b(a)h(n)m(umeric)g(argumen)m(t)g(is)g
+(supplied,)f(the)h(mark)g(is)f(set)630 3333 y(to)f(that)g(p)s(osition.)
+150 3506 y Ft(exchange-point-and-mark)24 b(\(C-x)29 b(C-x\))630
+3615 y Fu(Sw)m(ap)i(the)g(p)s(oin)m(t)g(with)g(the)g(mark.)43
+b(The)31 b(curren)m(t)g(cursor)f(p)s(osition)i(is)f(set)h(to)f(the)h
+(sa)m(v)m(ed)630 3725 y(p)s(osition,)f(and)e(the)i(old)g(cursor)e(p)s
+(osition)i(is)f(sa)m(v)m(ed)i(as)e(the)h(mark.)150 3898
+y Ft(character-search)26 b(\(C-]\))630 4008 y Fu(A)f(c)m(haracter)h(is)
+f(read)g(and)f(p)s(oin)m(t)h(is)g(mo)m(v)m(ed)h(to)g(the)f(next)g(o)s
+(ccurrence)g(of)g(that)g(c)m(haracter.)630 4117 y(A)30
+b(negativ)m(e)j(coun)m(t)e(searc)m(hes)g(for)f(previous)g(o)s
+(ccurrences.)150 4290 y Ft(character-search-backwar)o(d)24
+b(\(M-C-]\))630 4400 y Fu(A)45 b(c)m(haracter)h(is)f(read)g(and)f(p)s
+(oin)m(t)h(is)g(mo)m(v)m(ed)h(to)f(the)g(previous)f(o)s(ccurrence)h(of)
+g(that)630 4509 y(c)m(haracter.)d(A)31 b(negativ)m(e)h(coun)m(t)f
+(searc)m(hes)h(for)e(subsequen)m(t)f(o)s(ccurrences.)150
+4682 y Ft(skip-csi-sequence)d(\(\))630 4792 y Fu(Read)i(enough)f(c)m
+(haracters)h(to)g(consume)f(a)h(m)m(ulti-k)m(ey)h(sequence)f(suc)m(h)f
+(as)g(those)h(de\014ned)630 4902 y(for)37 b(k)m(eys)h(lik)m(e)g(Home)g
+(and)f(End.)60 b(Suc)m(h)37 b(sequences)g(b)s(egin)g(with)g(a)h(Con)m
+(trol)g(Sequence)630 5011 y(Indicator)f(\(CSI\),)f(usually)h(ESC-[.)59
+b(If)36 b(this)g(sequence)h(is)g(b)s(ound)d(to)k Ft("\\)p
+Fu(e[)p Ft(")p Fu(,)g(k)m(eys)f(pro-)630 5121 y(ducing)31
+b(suc)m(h)h(sequences)g(will)h(ha)m(v)m(e)g(no)f(e\013ect)h(unless)e
+(explicitly)j(b)s(ound)c(to)i(a)h(readline)630 5230 y(command,)f
+(instead)g(of)g(inserting)g(stra)m(y)h(c)m(haracters)g(in)m(to)g(the)f
+(editing)h(bu\013er.)44 b(This)31 b(is)630 5340 y(un)m(b)s(ound)d(b)m
+(y)i(default,)h(but)f(usually)g(b)s(ound)e(to)j(ESC-[.)p
+eop end
+%%Page: 136 142
+TeXDict begin 136 141 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(136)150 299 y Ft(insert-comment)26
+b(\(M-#\))630 408 y Fu(Without)36 b(a)g(n)m(umeric)g(argumen)m(t,)h
+(the)f(v)-5 b(alue)36 b(of)g(the)g Ft(comment-begin)c
+Fu(v)-5 b(ariable)36 b(is)g(in-)630 518 y(serted)c(at)g(the)g(b)s
+(eginning)f(of)h(the)f(curren)m(t)h(line.)45 b(If)31
+b(a)h(n)m(umeric)f(argumen)m(t)h(is)g(supplied,)630 628
+y(this)k(command)h(acts)g(as)g(a)g(toggle:)55 b(if)37
+b(the)f(c)m(haracters)i(at)g(the)e(b)s(eginning)g(of)h(the)g(line)630
+737 y(do)30 b(not)h(matc)m(h)h(the)f(v)-5 b(alue)31 b(of)f
+Ft(comment-begin)p Fu(,)e(the)i(v)-5 b(alue)31 b(is)g(inserted,)g
+(otherwise)g(the)630 847 y(c)m(haracters)42 b(in)d Ft(comment-begin)e
+Fu(are)j(deleted)h(from)f(the)g(b)s(eginning)g(of)g(the)g(line.)71
+b(In)630 956 y(either)37 b(case,)j(the)e(line)f(is)g(accepted)i(as)e
+(if)g(a)g(newline)g(had)g(b)s(een)f(t)m(yp)s(ed.)60 b(The)37
+b(default)630 1066 y(v)-5 b(alue)32 b(of)g Ft(comment-begin)c
+Fu(causes)k(this)f(command)h(to)g(mak)m(e)h(the)e(curren)m(t)h(line)g
+(a)g(shell)630 1176 y(commen)m(t.)40 b(If)26 b(a)h(n)m(umeric)f
+(argumen)m(t)h(causes)g(the)f(commen)m(t)i(c)m(haracter)g(to)f(b)s(e)f
+(remo)m(v)m(ed,)630 1285 y(the)31 b(line)f(will)h(b)s(e)f(executed)h(b)
+m(y)f(the)h(shell.)150 1443 y Ft(dump-functions)26 b(\(\))630
+1553 y Fu(Prin)m(t)g(all)i(of)e(the)h(functions)f(and)g(their)g(k)m(ey)
+h(bindings)e(to)j(the)e(Readline)h(output)f(stream.)630
+1663 y(If)31 b(a)h(n)m(umeric)g(argumen)m(t)g(is)g(supplied,)f(the)h
+(output)f(is)h(formatted)g(in)f(suc)m(h)h(a)g(w)m(a)m(y)g(that)630
+1772 y(it)f(can)g(b)s(e)e(made)i(part)f(of)g(an)h Fr(inputrc)k
+Fu(\014le.)41 b(This)29 b(command)h(is)h(un)m(b)s(ound)c(b)m(y)k
+(default.)150 1931 y Ft(dump-variables)26 b(\(\))630
+2040 y Fu(Prin)m(t)21 b(all)h(of)g(the)f(settable)i(v)-5
+b(ariables)22 b(and)f(their)g(v)-5 b(alues)22 b(to)g(the)f(Readline)h
+(output)f(stream.)630 2150 y(If)31 b(a)h(n)m(umeric)g(argumen)m(t)g(is)
+g(supplied,)f(the)h(output)f(is)h(formatted)g(in)f(suc)m(h)h(a)g(w)m(a)
+m(y)g(that)630 2259 y(it)f(can)g(b)s(e)e(made)i(part)f(of)g(an)h
+Fr(inputrc)k Fu(\014le.)41 b(This)29 b(command)h(is)h(un)m(b)s(ound)c
+(b)m(y)k(default.)150 2418 y Ft(dump-macros)c(\(\))630
+2527 y Fu(Prin)m(t)34 b(all)g(of)g(the)g(Readline)g(k)m(ey)h(sequences)
+f(b)s(ound)e(to)i(macros)g(and)f(the)h(strings)g(they)630
+2637 y(output.)53 b(If)35 b(a)g(n)m(umeric)f(argumen)m(t)i(is)e
+(supplied,)h(the)g(output)g(is)f(formatted)i(in)e(suc)m(h)h(a)630
+2746 y(w)m(a)m(y)c(that)g(it)f(can)g(b)s(e)g(made)g(part)f(of)i(an)e
+Fr(inputrc)35 b Fu(\014le.)41 b(This)29 b(command)h(is)g(un)m(b)s(ound)
+d(b)m(y)630 2856 y(default.)150 3014 y Ft(glob-complete-word)e(\(M-g\))
+630 3124 y Fu(The)i(w)m(ord)h(b)s(efore)f(p)s(oin)m(t)h(is)g(treated)h
+(as)f(a)h(pattern)f(for)f(pathname)h(expansion,)g(with)g(an)630
+3233 y(asterisk)d(implicitly)h(app)s(ended.)37 b(This)23
+b(pattern)i(is)f(used)g(to)h(generate)h(a)e(list)h(of)g(matc)m(hing)630
+3343 y(\014le)30 b(names)h(for)f(p)s(ossible)g(completions.)150
+3501 y Ft(glob-expand-word)c(\(C-x)j(*\))630 3611 y Fu(The)40
+b(w)m(ord)g(b)s(efore)g(p)s(oin)m(t)h(is)g(treated)g(as)g(a)g(pattern)g
+(for)f(pathname)g(expansion,)k(and)630 3720 y(the)c(list)g(of)f(matc)m
+(hing)i(\014le)e(names)g(is)h(inserted,)h(replacing)g(the)e(w)m(ord.)67
+b(If)39 b(a)h(n)m(umeric)630 3830 y(argumen)m(t)31 b(is)f(supplied,)g
+(a)g(`)p Ft(*)p Fu(')h(is)f(app)s(ended)f(b)s(efore)h(pathname)g
+(expansion.)150 3988 y Ft(glob-list-expansions)25 b(\(C-x)k(g\))630
+4098 y Fu(The)k(list)h(of)f(expansions)g(that)h(w)m(ould)f(ha)m(v)m(e)h
+(b)s(een)f(generated)h(b)m(y)f Ft(glob-expand-word)630
+4208 y Fu(is)h(displa)m(y)m(ed,)h(and)e(the)h(line)g(is)f(redra)m(wn.)
+50 b(If)33 b(a)h(n)m(umeric)g(argumen)m(t)g(is)f(supplied,)h(a)g(`)p
+Ft(*)p Fu(')630 4317 y(is)c(app)s(ended)f(b)s(efore)h(pathname)g
+(expansion.)150 4475 y Ft(display-shell-version)25 b(\(C-x)k(C-v\))630
+4585 y Fu(Displa)m(y)j(v)m(ersion)e(information)h(ab)s(out)f(the)h
+(curren)m(t)f(instance)h(of)f(Bash.)150 4743 y Ft(shell-expand-line)c
+(\(M-C-e\))630 4853 y Fu(Expand)34 b(the)h(line)h(as)g(the)f(shell)h
+(do)s(es.)55 b(This)34 b(p)s(erforms)g(alias)i(and)f(history)g
+(expansion)630 4963 y(as)f(w)m(ell)g(as)g(all)h(of)e(the)h(shell)g(w)m
+(ord)f(expansions)g(\(see)i(Section)f(3.5)h([Shell)e(Expansions],)630
+5072 y(page)e(22\).)150 5230 y Ft(history-expand-line)25
+b(\(M-^\))630 5340 y Fu(P)m(erform)30 b(history)h(expansion)f(on)g(the)
+h(curren)m(t)f(line.)p eop end
+%%Page: 137 143
+TeXDict begin 137 142 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(137)150 299 y Ft(magic-space)27
+b(\(\))630 408 y Fu(P)m(erform)c(history)g(expansion)g(on)g(the)g
+(curren)m(t)g(line)g(and)g(insert)g(a)g(space)h(\(see)g(Section)g(9.3)
+630 518 y([History)31 b(In)m(teraction],)i(page)e(148\).)150
+663 y Ft(alias-expand-line)26 b(\(\))630 773 y Fu(P)m(erform)i(alias)i
+(expansion)e(on)g(the)h(curren)m(t)f(line)h(\(see)g(Section)g(6.6)h
+([Aliases],)g(page)f(94\).)150 918 y Ft(history-and-alias-expand)o
+(-lin)o(e)24 b(\(\))630 1028 y Fu(P)m(erform)30 b(history)h(and)e
+(alias)j(expansion)e(on)g(the)h(curren)m(t)f(line.)150
+1173 y Ft(insert-last-argument)25 b(\(M-.)k(or)h(M-_\))630
+1283 y Fu(A)g(synon)m(ym)g(for)g Ft(yank-last-arg)p Fu(.)150
+1428 y Ft(edit-and-execute-command)24 b(\(C-x)29 b(C-e\))630
+1538 y Fu(In)m(v)m(ok)m(e)34 b(an)f(editor)g(on)g(the)g(curren)m(t)f
+(command)h(line,)h(and)e(execute)i(the)f(result)g(as)g(shell)630
+1647 y(commands.)81 b(Bash)44 b(attempts)h(to)g(in)m(v)m(ok)m(e)h
+Ft($VISUAL)p Fu(,)f Ft($EDITOR)p Fu(,)h(and)d Ft(emacs)g
+Fu(as)h(the)630 1757 y(editor,)31 b(in)f(that)h(order.)150
+1983 y Fs(8.5)68 b(Readline)47 b(vi)e(Mo)t(de)150 2143
+y Fu(While)32 b(the)g(Readline)g(library)f(do)s(es)g(not)h(ha)m(v)m(e)h
+(a)f(full)f(set)h(of)g Ft(vi)f Fu(editing)h(functions,)f(it)h(do)s(es)g
+(con)m(tain)150 2252 y(enough)i(to)h(allo)m(w)g(simple)f(editing)h(of)f
+(the)g(line.)52 b(The)34 b(Readline)g Ft(vi)g Fu(mo)s(de)f(b)s(eha)m(v)
+m(es)i(as)f(sp)s(eci\014ed)f(in)150 2362 y(the)e Fm(posix)e
+Fu(standard.)275 2489 y(In)35 b(order)g(to)i(switc)m(h)f(in)m(teractiv)
+m(ely)j(b)s(et)m(w)m(een)d Ft(emacs)f Fu(and)g Ft(vi)g
+Fu(editing)h(mo)s(des,)h(use)f(the)g(`)p Ft(set)30 b(-o)150
+2599 y(emacs)p Fu(')43 b(and)h(`)p Ft(set)30 b(-o)f(vi)p
+Fu(')44 b(commands)g(\(see)i(Section)f(4.3.1)h([The)e(Set)h(Builtin],)j
+(page)e(62\).)83 b(The)150 2709 y(Readline)31 b(default)g(is)f
+Ft(emacs)f Fu(mo)s(de.)275 2836 y(When)g(y)m(ou)i(en)m(ter)f(a)h(line)f
+(in)g Ft(vi)f Fu(mo)s(de,)h(y)m(ou)h(are)f(already)h(placed)f(in)g
+(`insertion')g(mo)s(de,)g(as)h(if)f(y)m(ou)150 2946 y(had)f(t)m(yp)s
+(ed)g(an)g(`)p Ft(i)p Fu('.)41 b(Pressing)29 b Ft(ESC)f
+Fu(switc)m(hes)i(y)m(ou)g(in)m(to)h(`command')e(mo)s(de,)h(where)e(y)m
+(ou)i(can)g(edit)g(the)150 3055 y(text)35 b(of)f(the)g(line)g(with)f
+(the)h(standard)f Ft(vi)g Fu(mo)m(v)m(emen)m(t)j(k)m(eys,)g(mo)m(v)m(e)
+f(to)f(previous)g(history)f(lines)h(with)150 3165 y(`)p
+Ft(k)p Fu(')d(and)e(subsequen)m(t)h(lines)h(with)f(`)p
+Ft(j)p Fu(',)g(and)g(so)h(forth.)150 3391 y Fs(8.6)68
+b(Programmable)47 b(Completion)150 3551 y Fu(When)25
+b(w)m(ord)g(completion)i(is)f(attempted)g(for)g(an)f(argumen)m(t)h(to)g
+(a)g(command)f(for)h(whic)m(h)f(a)h(completion)150 3660
+y(sp)s(eci\014cation)40 b(\(a)h Fr(compsp)s(ec)6 b Fu(\))39
+b(has)h(b)s(een)f(de\014ned)f(using)h(the)h Ft(complete)d
+Fu(builtin)j(\(see)g(Section)h(8.7)150 3770 y([Programmable)h
+(Completion)f(Builtins],)k(page)d(139\),)j(the)c(programmable)g
+(completion)i(facilities)150 3880 y(are)31 b(in)m(v)m(ok)m(ed.)275
+4007 y(First,)23 b(the)e(command)g(name)g(is)h(iden)m(ti\014ed.)37
+b(If)21 b(a)g(compsp)s(ec)g(has)g(b)s(een)f(de\014ned)g(for)h(that)h
+(command,)150 4117 y(the)44 b(compsp)s(ec)g(is)g(used)f(to)h(generate)i
+(the)e(list)g(of)g(p)s(ossible)g(completions)h(for)e(the)h(w)m(ord.)81
+b(If)44 b(the)150 4226 y(command)36 b(w)m(ord)g(is)g(the)g(empt)m(y)h
+(string)f(\(completion)i(attempted)f(at)g(the)g(b)s(eginning)e(of)h(an)
+h(empt)m(y)150 4336 y(line\),)30 b(an)m(y)g(compsp)s(ec)f(de\014ned)f
+(with)h(the)h Ft(-E)e Fu(option)i(to)g Ft(complete)d
+Fu(is)i(used.)40 b(If)29 b(the)g(command)g(w)m(ord)150
+4445 y(is)e(a)h(full)e(pathname,)i(a)g(compsp)s(ec)e(for)h(the)g(full)g
+(pathname)g(is)g(searc)m(hed)h(for)f(\014rst.)39 b(If)26
+b(no)h(compsp)s(ec)g(is)150 4555 y(found)22 b(for)g(the)h(full)g
+(pathname,)h(an)f(attempt)h(is)f(made)g(to)g(\014nd)f(a)h(compsp)s(ec)f
+(for)h(the)g(p)s(ortion)f(follo)m(wing)150 4665 y(the)34
+b(\014nal)g(slash.)53 b(If)34 b(those)g(searc)m(hes)i(do)e(not)g
+(result)h(in)f(a)g(compsp)s(ec,)h(an)m(y)g(compsp)s(ec)f(de\014ned)f
+(with)150 4774 y(the)k Ft(-D)g Fu(option)g(to)h Ft(complete)d
+Fu(is)i(used)g(as)g(the)g(default.)61 b(If)37 b(there)g(is)h(no)f
+(default)g(compsp)s(ec,)i(Bash)150 4884 y(attempts)e(alias)h(expansion)
+e(on)g(the)h(command)f(w)m(ord)g(as)h(a)f(\014nal)g(resort,)j(and)c
+(attempts)j(to)f(\014nd)e(a)150 4993 y(compsp)s(ec)30
+b(for)g(the)h(command)f(w)m(ord)g(from)g(an)m(y)h(successful)f
+(expansion)275 5121 y(Once)k(a)g(compsp)s(ec)g(has)g(b)s(een)f(found,)h
+(it)h(is)f(used)f(to)i(generate)h(the)e(list)h(of)f(matc)m(hing)h(w)m
+(ords.)51 b(If)150 5230 y(a)37 b(compsp)s(ec)f(is)g(not)h(found,)f(the)
+h(default)f(Bash)h(completion)g(describ)s(ed)e(ab)s(o)m(v)m(e)j(\(see)f
+(Section)g(8.4.6)150 5340 y([Commands)30 b(F)-8 b(or)31
+b(Completion],)g(page)g(133\))h(is)f(p)s(erformed.)p
+eop end
+%%Page: 138 144
+TeXDict begin 138 143 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(138)275 299 y(First,)31
+b(the)g(actions)g(sp)s(eci\014ed)f(b)m(y)h(the)f(compsp)s(ec)h(are)g
+(used.)40 b(Only)30 b(matc)m(hes)i(whic)m(h)e(are)h(pre\014xed)150
+408 y(b)m(y)h(the)f(w)m(ord)h(b)s(eing)f(completed)h(are)g(returned.)44
+b(When)31 b(the)h Ft(-f)f Fu(or)h Ft(-d)f Fu(option)h(is)f(used)g(for)h
+(\014lename)150 518 y(or)e(directory)h(name)f(completion,)i(the)e
+(shell)h(v)-5 b(ariable)31 b Ft(FIGNORE)d Fu(is)i(used)f(to)i(\014lter)
+g(the)f(matc)m(hes.)42 b(See)150 628 y(Section)31 b(5.2)h([Bash)e(V)-8
+b(ariables],)33 b(page)e(73,)g(for)f(a)h(description)g(of)f
+Ft(FIGNORE)p Fu(.)275 769 y(An)m(y)22 b(completions)h(sp)s(eci\014ed)f
+(b)m(y)g(a)h(\014lename)f(expansion)h(pattern)f(to)h(the)g
+Ft(-G)e Fu(option)i(are)g(generated)150 878 y(next.)41
+b(The)29 b(w)m(ords)g(generated)h(b)m(y)g(the)g(pattern)f(need)h(not)f
+(matc)m(h)i(the)f(w)m(ord)f(b)s(eing)g(completed.)41
+b(The)150 988 y Ft(GLOBIGNORE)29 b Fu(shell)i(v)-5 b(ariable)32
+b(is)g(not)g(used)e(to)i(\014lter)g(the)g(matc)m(hes,)h(but)d(the)i
+Ft(FIGNORE)e Fu(shell)h(v)-5 b(ariable)150 1097 y(is)30
+b(used.)275 1238 y(Next,)39 b(the)f(string)f(sp)s(eci\014ed)f(as)h(the)
+g(argumen)m(t)h(to)g(the)f Ft(-W)f Fu(option)i(is)f(considered.)60
+b(The)37 b(string)150 1348 y(is)c(\014rst)e(split)i(using)f(the)h(c)m
+(haracters)h(in)e(the)h Ft(IFS)e Fu(sp)s(ecial)j(v)-5
+b(ariable)33 b(as)g(delimiters.)48 b(Shell)32 b(quoting)h(is)150
+1457 y(honored)f(within)h(the)g(string,)h(in)f(order)f(to)i(pro)m(vide)
+f(a)h(mec)m(hanism)f(for)g(the)g(w)m(ords)g(to)g(con)m(tain)i(shell)150
+1567 y(metac)m(haracters)e(or)e(c)m(haracters)i(in)e(the)g(v)-5
+b(alue)31 b(of)g Ft(IFS)p Fu(.)42 b(Eac)m(h)32 b(w)m(ord)e(is)h(then)g
+(expanded)f(using)h(brace)150 1677 y(expansion,)g(tilde)h(expansion,)f
+(parameter)g(and)g(v)-5 b(ariable)32 b(expansion,)f(command)f
+(substitution,)i(and)150 1786 y(arithmetic)c(expansion,)f(as)g(describ)
+s(ed)e(ab)s(o)m(v)m(e)i(\(see)h(Section)f(3.5)g([Shell)g(Expansions],)g
+(page)g(22\).)40 b(The)150 1896 y(results)23 b(are)h(split)g(using)f
+(the)h(rules)f(describ)s(ed)f(ab)s(o)m(v)m(e)j(\(see)g(Section)f(3.5.7)
+h([W)-8 b(ord)24 b(Splitting],)i(page)e(32\).)150 2005
+y(The)j(results)h(of)f(the)h(expansion)g(are)g(pre\014x-matc)m(hed)g
+(against)h(the)f(w)m(ord)f(b)s(eing)g(completed,)j(and)d(the)150
+2115 y(matc)m(hing)k(w)m(ords)f(b)s(ecome)h(the)g(p)s(ossible)f
+(completions.)275 2256 y(After)f(these)g(matc)m(hes)i(ha)m(v)m(e)f(b)s
+(een)f(generated,)h(an)m(y)g(shell)f(function)g(or)g(command)g(sp)s
+(eci\014ed)f(with)150 2365 y(the)36 b Ft(-F)f Fu(and)g
+Ft(-C)g Fu(options)h(is)g(in)m(v)m(ok)m(ed.)59 b(When)35
+b(the)h(command)g(or)f(function)h(is)g(in)m(v)m(ok)m(ed,)i(the)e
+Ft(COMP_)150 2475 y(LINE)p Fu(,)42 b Ft(COMP_POINT)p
+Fu(,)d Ft(COMP_KEY)p Fu(,)i(and)e Ft(COMP_TYPE)f Fu(v)-5
+b(ariables)41 b(are)f(assigned)g(v)-5 b(alues)41 b(as)f(describ)s(ed)
+150 2585 y(ab)s(o)m(v)m(e)34 b(\(see)g(Section)g(5.2)g([Bash)f(V)-8
+b(ariables],)36 b(page)d(73\).)50 b(If)33 b(a)g(shell)g(function)g(is)g
+(b)s(eing)f(in)m(v)m(ok)m(ed,)k(the)150 2694 y Ft(COMP_WORDS)j
+Fu(and)i Ft(COMP_CWORD)d Fu(v)-5 b(ariables)42 b(are)g(also)h(set.)74
+b(When)41 b(the)h(function)f(or)h(command)f(is)150 2804
+y(in)m(v)m(ok)m(ed,)c(the)e(\014rst)f(argumen)m(t)h(\($1\))h(is)e(the)h
+(name)g(of)f(the)h(command)f(whose)h(argumen)m(ts)f(are)h(b)s(eing)150
+2913 y(completed,)30 b(the)f(second)f(argumen)m(t)h(\($2\))h(is)f(the)g
+(w)m(ord)f(b)s(eing)g(completed,)i(and)e(the)h(third)e(argumen)m(t)150
+3023 y(\($3\))40 b(is)f(the)f(w)m(ord)h(preceding)f(the)h(w)m(ord)f(b)s
+(eing)g(completed)i(on)e(the)h(curren)m(t)f(command)h(line.)65
+b(No)150 3133 y(\014ltering)33 b(of)h(the)f(generated)h(completions)g
+(against)h(the)e(w)m(ord)g(b)s(eing)f(completed)i(is)g(p)s(erformed;)f
+(the)150 3242 y(function)d(or)g(command)h(has)f(complete)i(freedom)e
+(in)g(generating)h(the)g(matc)m(hes.)275 3383 y(An)m(y)j(function)h(sp)
+s(eci\014ed)f(with)g Ft(-F)g Fu(is)h(in)m(v)m(ok)m(ed)h(\014rst.)53
+b(The)35 b(function)f(ma)m(y)h(use)g(an)m(y)g(of)g(the)g(shell)150
+3493 y(facilities,)50 b(including)44 b(the)h Ft(compgen)d
+Fu(and)i Ft(compopt)e Fu(builtins)i(describ)s(ed)f(b)s(elo)m(w)h(\(see)
+i(Section)f(8.7)150 3602 y([Programmable)31 b(Completion)h(Builtins],)f
+(page)h(139\),)g(to)g(generate)g(the)f(matc)m(hes.)42
+b(It)31 b(m)m(ust)g(put)f(the)150 3712 y(p)s(ossible)g(completions)h
+(in)f(the)h Ft(COMPREPLY)d Fu(arra)m(y)j(v)-5 b(ariable,)31
+b(one)g(p)s(er)e(arra)m(y)i(elemen)m(t.)275 3853 y(Next,)26
+b(an)m(y)f(command)f(sp)s(eci\014ed)g(with)g(the)h Ft(-C)f
+Fu(option)h(is)f(in)m(v)m(ok)m(ed)i(in)e(an)g(en)m(vironmen)m(t)h
+(equiv)-5 b(alen)m(t)150 3962 y(to)26 b(command)e(substitution.)39
+b(It)25 b(should)f(prin)m(t)h(a)g(list)h(of)f(completions,)i(one)e(p)s
+(er)f(line,)j(to)f(the)f(standard)150 4072 y(output.)40
+b(Bac)m(kslash)32 b(ma)m(y)f(b)s(e)f(used)g(to)h(escap)s(e)g(a)f
+(newline,)h(if)f(necessary)-8 b(.)275 4213 y(After)24
+b(all)i(of)f(the)f(p)s(ossible)g(completions)i(are)f(generated,)i(an)m
+(y)e(\014lter)g(sp)s(eci\014ed)e(with)i(the)g Ft(-X)e
+Fu(option)150 4322 y(is)34 b(applied)g(to)g(the)h(list.)52
+b(The)33 b(\014lter)h(is)g(a)h(pattern)f(as)g(used)f(for)h(pathname)g
+(expansion;)i(a)e(`)p Ft(&)p Fu(')g(in)g(the)150 4432
+y(pattern)28 b(is)f(replaced)h(with)g(the)f(text)i(of)f(the)f(w)m(ord)h
+(b)s(eing)f(completed.)40 b(A)28 b(literal)h(`)p Ft(&)p
+Fu(')f(ma)m(y)g(b)s(e)f(escap)s(ed)150 4542 y(with)38
+b(a)h(bac)m(kslash;)k(the)38 b(bac)m(kslash)h(is)g(remo)m(v)m(ed)g(b)s
+(efore)f(attempting)h(a)g(matc)m(h.)65 b(An)m(y)39 b(completion)150
+4651 y(that)32 b(matc)m(hes)g(the)g(pattern)g(will)f(b)s(e)g(remo)m(v)m
+(ed)h(from)f(the)h(list.)44 b(A)32 b(leading)g(`)p Ft(!)p
+Fu(')f(negates)i(the)f(pattern;)150 4761 y(in)d(this)g(case)h(an)m(y)g
+(completion)h(not)e(matc)m(hing)h(the)g(pattern)f(will)h(b)s(e)e(remo)m
+(v)m(ed.)42 b(If)29 b(the)g Ft(nocasematch)150 4870 y
+Fu(shell)k(option)f(\(see)i(the)e(description)g(of)h
+Ft(shopt)e Fu(in)h(Section)h(4.3.2)h([The)e(Shopt)g(Builtin],)h(page)g
+(66\))h(is)150 4980 y(enabled,)d(the)f(matc)m(h)h(is)g(p)s(erformed)e
+(without)h(regard)g(to)h(the)g(case)g(of)g(alphab)s(etic)g(c)m
+(haracters.)275 5121 y(Finally)-8 b(,)42 b(an)m(y)c(pre\014x)g(and)f
+(su\016x)h(sp)s(eci\014ed)f(with)i(the)f Ft(-P)g Fu(and)g
+Ft(-S)f Fu(options)i(are)g(added)f(to)h(eac)m(h)150 5230
+y(mem)m(b)s(er)31 b(of)g(the)h(completion)h(list,)f(and)f(the)h(result)
+f(is)h(returned)e(to)i(the)g(Readline)g(completion)h(co)s(de)150
+5340 y(as)e(the)f(list)h(of)g(p)s(ossible)f(completions.)p
+eop end
+%%Page: 139 145
+TeXDict begin 139 144 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(139)275 299 y(If)27
+b(the)h(previously-applied)f(actions)i(do)f(not)g(generate)h(an)m(y)f
+(matc)m(hes,)i(and)d(the)h Ft(-o)h(dirnames)d Fu(op-)150
+408 y(tion)j(w)m(as)f(supplied)f(to)i Ft(complete)d Fu(when)h(the)h
+(compsp)s(ec)g(w)m(as)g(de\014ned,)g(directory)g(name)h(completion)150
+518 y(is)h(attempted.)275 653 y(If)35 b(the)g Ft(-o)30
+b(plusdirs)j Fu(option)j(w)m(as)g(supplied)e(to)i Ft(complete)e
+Fu(when)g(the)i(compsp)s(ec)f(w)m(as)h(de\014ned,)150
+763 y(directory)g(name)f(completion)i(is)e(attempted)h(and)f(an)m(y)h
+(matc)m(hes)g(are)g(added)f(to)h(the)f(results)g(of)h(the)150
+873 y(other)31 b(actions.)275 1008 y(By)g(default,)i(if)e(a)h(compsp)s
+(ec)f(is)h(found,)f(whatev)m(er)h(it)g(generates)h(is)e(returned)g(to)h
+(the)g(completion)150 1117 y(co)s(de)21 b(as)g(the)g(full)g(set)g(of)g
+(p)s(ossible)f(completions.)39 b(The)20 b(default)h(Bash)g(completions)
+h(are)g(not)f(attempted,)150 1227 y(and)30 b(the)g(Readline)h(default)f
+(of)g(\014lename)h(completion)g(is)f(disabled.)41 b(If)29
+b(the)i Ft(-o)e(bashdefault)e Fu(option)150 1337 y(w)m(as)d(supplied)e
+(to)j Ft(complete)c Fu(when)i(the)g(compsp)s(ec)h(w)m(as)g(de\014ned,)g
+(the)f(default)h(Bash)g(completions)h(are)150 1446 y(attempted)j(if)f
+(the)h(compsp)s(ec)f(generates)h(no)f(matc)m(hes.)41
+b(If)27 b(the)g Ft(-o)j(default)25 b Fu(option)j(w)m(as)f(supplied)f
+(to)150 1556 y Ft(complete)f Fu(when)h(the)h(compsp)s(ec)f(w)m(as)i
+(de\014ned,)e(Readline's)i(default)f(completion)h(will)f(b)s(e)f(p)s
+(erformed)150 1665 y(if)k(the)h(compsp)s(ec)f(\(and,)g(if)h(attempted,)
+g(the)g(default)f(Bash)h(completions\))h(generate)g(no)e(matc)m(hes.)
+275 1801 y(When)20 b(a)i(compsp)s(ec)e(indicates)i(that)g(directory)g
+(name)f(completion)h(is)f(desired,)i(the)e(programmable)150
+1910 y(completion)31 b(functions)e(force)i(Readline)f(to)h(app)s(end)d
+(a)i(slash)g(to)g(completed)h(names)e(whic)m(h)h(are)g(sym-)150
+2020 y(b)s(olic)40 b(links)g(to)h(directories,)j(sub)5
+b(ject)40 b(to)h(the)f(v)-5 b(alue)41 b(of)f(the)g Fr(mark-directories)
+45 b Fu(Readline)c(v)-5 b(ariable,)150 2130 y(regardless)31
+b(of)f(the)h(setting)g(of)g(the)f Fr(mark-symlink)m(ed-directories)36
+b Fu(Readline)31 b(v)-5 b(ariable.)275 2265 y(There)25
+b(is)i(some)g(supp)s(ort)e(for)h(dynamically)h(mo)s(difying)f
+(completions.)40 b(This)26 b(is)g(most)h(useful)f(when)150
+2374 y(used)40 b(in)h(com)m(bination)i(with)e(a)g(default)h(completion)
+g(sp)s(eci\014ed)f(with)g Ft(-D)p Fu(.)72 b(It's)42 b(p)s(ossible)f
+(for)g(shell)150 2484 y(functions)28 b(executed)h(as)f(completion)i
+(handlers)d(to)i(indicate)g(that)g(completion)g(should)e(b)s(e)h
+(retried)g(b)m(y)150 2594 y(returning)j(an)i(exit)g(status)f(of)h(124.)
+48 b(If)31 b(a)i(shell)f(function)g(returns)f(124,)k(and)c(c)m(hanges)j
+(the)e(compsp)s(ec)150 2703 y(asso)s(ciated)43 b(with)e(the)g(command)g
+(on)g(whic)m(h)g(completion)i(is)e(b)s(eing)g(attempted)h(\(supplied)e
+(as)i(the)150 2813 y(\014rst)29 b(argumen)m(t)h(when)e(the)i(function)f
+(is)g(executed\),)j(programmable)d(completion)i(restarts)f(from)f(the)
+150 2922 y(b)s(eginning,)e(with)g(an)h(attempt)g(to)g(\014nd)e(a)i(new)
+e(compsp)s(ec)i(for)f(that)h(command.)39 b(This)27 b(allo)m(ws)h(a)g
+(set)g(of)150 3032 y(completions)33 b(to)f(b)s(e)g(built)f(dynamically)
+i(as)f(completion)h(is)f(attempted,)h(rather)f(than)f(b)s(eing)g
+(loaded)150 3142 y(all)g(at)g(once.)275 3277 y(F)-8 b(or)38
+b(instance,)h(assuming)e(that)h(there)f(is)h(a)f(library)g(of)g(compsp)
+s(ecs,)i(eac)m(h)g(k)m(ept)e(in)g(a)h(\014le)f(corre-)150
+3386 y(sp)s(onding)g(to)j(the)f(name)f(of)h(the)g(command,)i(the)e
+(follo)m(wing)h(default)f(completion)h(function)e(w)m(ould)150
+3496 y(load)31 b(completions)g(dynamically:)390 3631
+y Ft(_completion_loader\(\))390 3741 y({)581 3851 y(.)47
+b("/etc/bash_completion.d/$1)o(.sh)o(")42 b(>/dev/null)j(2>&1)i(&&)g
+(return)f(124)390 3960 y(})390 4070 y(complete)g(-D)h(-F)g
+(_completion_loader)c(-o)k(bashdefault)e(-o)i(default)150
+4312 y Fs(8.7)68 b(Programmable)47 b(Completion)f(Builtins)150
+4471 y Fu(Three)21 b(builtin)g(commands)f(are)i(a)m(v)-5
+b(ailable)24 b(to)e(manipulate)f(the)h(programmable)f(completion)h
+(facilities:)150 4581 y(one)34 b(to)g(sp)s(ecify)f(ho)m(w)h(the)f
+(argumen)m(ts)h(to)g(a)g(particular)g(command)f(are)h(to)g(b)s(e)f
+(completed,)j(and)d(t)m(w)m(o)150 4690 y(to)e(mo)s(dify)f(the)g
+(completion)i(as)e(it)h(is)g(happ)s(ening.)150 4851 y
+Ft(compgen)870 4986 y(compgen)46 b([)p Fj(option)p Ft(])f([)p
+Fj(word)p Ft(])630 5121 y Fu(Generate)27 b(p)s(ossible)e(completion)i
+(matc)m(hes)g(for)e Fr(w)m(ord)k Fu(according)e(to)f(the)g
+Fr(option)p Fu(s,)h(whic)m(h)630 5230 y(ma)m(y)32 b(b)s(e)f(an)m(y)h
+(option)g(accepted)g(b)m(y)g(the)f Ft(complete)f Fu(builtin)h(with)g
+(the)g(exception)i(of)f Ft(-p)630 5340 y Fu(and)39 b
+Ft(-r)p Fu(,)i(and)e(write)h(the)g(matc)m(hes)g(to)g(the)g(standard)f
+(output.)68 b(When)39 b(using)g(the)h Ft(-F)p eop end
+%%Page: 140 146
+TeXDict begin 140 145 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(140)630 299 y(or)33
+b Ft(-C)f Fu(options,)i(the)e(v)-5 b(arious)33 b(shell)g(v)-5
+b(ariables)33 b(set)g(b)m(y)g(the)g(programmable)g(completion)630
+408 y(facilities,)g(while)d(a)m(v)-5 b(ailable,)33 b(will)e(not)g(ha)m
+(v)m(e)g(useful)f(v)-5 b(alues.)630 555 y(The)34 b(matc)m(hes)h(will)g
+(b)s(e)f(generated)h(in)f(the)h(same)g(w)m(a)m(y)g(as)g(if)f(the)h
+(programmable)f(com-)630 664 y(pletion)d(co)s(de)g(had)f(generated)i
+(them)e(directly)i(from)e(a)h(completion)h(sp)s(eci\014cation)f(with)
+630 774 y(the)e(same)h(\015ags.)40 b(If)29 b Fr(w)m(ord)j
+Fu(is)d(sp)s(eci\014ed,)g(only)g(those)h(completions)g(matc)m(hing)g
+Fr(w)m(ord)j Fu(will)630 883 y(b)s(e)d(displa)m(y)m(ed.)630
+1029 y(The)24 b(return)g(v)-5 b(alue)25 b(is)g(true)f(unless)g(an)h(in)
+m(v)-5 b(alid)25 b(option)g(is)g(supplied,)f(or)h(no)g(matc)m(hes)g(w)m
+(ere)630 1139 y(generated.)150 1322 y Ft(complete)870
+1468 y(complete)46 b([-abcdefgjksuv])d([-o)k Fj(comp-option)p
+Ft(])e([-DEI])h([-A)h Fj(action)p Ft(])e([-)870 1577
+y(G)i Fj(globpat)p Ft(])870 1687 y([-W)g Fj(wordlist)p
+Ft(])e([-F)i Fj(function)p Ft(])e([-C)i Fj(command)p
+Ft(])f([-X)h Fj(filterpat)p Ft(])870 1797 y([-P)g Fj(prefix)p
+Ft(])f([-S)h Fj(suffix)p Ft(])e Fj(name)i Ft([)p Fj(name)f
+Ft(...])870 1906 y(complete)g(-pr)g([-DEI])h([)p Fj(name)f
+Ft(...)o(])630 2052 y Fu(Sp)s(ecify)37 b(ho)m(w)h(argumen)m(ts)f(to)i
+(eac)m(h)g Fr(name)j Fu(should)37 b(b)s(e)g(completed.)63
+b(If)38 b(the)f Ft(-p)g Fu(option)630 2162 y(is)30 b(supplied,)e(or)i
+(if)g(no)f(options)h(are)g(supplied,)f(existing)h(completion)h(sp)s
+(eci\014cations)g(are)630 2271 y(prin)m(ted)24 b(in)h(a)g(w)m(a)m(y)g
+(that)h(allo)m(ws)g(them)e(to)i(b)s(e)e(reused)f(as)i(input.)38
+b(The)24 b Ft(-r)g Fu(option)i(remo)m(v)m(es)630 2381
+y(a)i(completion)h(sp)s(eci\014cation)f(for)g(eac)m(h)h
+Fr(name)p Fu(,)f(or,)h(if)e(no)h Fr(name)5 b Fu(s)27
+b(are)h(supplied,)g(all)g(com-)630 2491 y(pletion)i(sp)s
+(eci\014cations.)42 b(The)29 b Ft(-D)g Fu(option)h(indicates)h(that)f
+(other)g(supplied)e(options)j(and)630 2600 y(actions)c(should)e(apply)g
+(to)i(the)f(\\default")h(command)e(completion;)k(that)e(is,)g
+(completion)630 2710 y(attempted)g(on)f(a)h(command)f(for)g(whic)m(h)g
+(no)g(completion)i(has)d(previously)h(b)s(een)g(de\014ned.)630
+2819 y(The)e Ft(-E)g Fu(option)h(indicates)g(that)g(other)g(supplied)e
+(options)h(and)g(actions)i(should)d(apply)h(to)630 2929
+y(\\empt)m(y")33 b(command)e(completion;)i(that)f(is,)g(completion)h
+(attempted)f(on)g(a)f(blank)g(line.)630 3039 y(The)24
+b Ft(-I)g Fu(option)h(indicates)g(that)g(other)g(supplied)e(options)h
+(and)g(actions)i(should)d(apply)h(to)630 3148 y(completion)29
+b(on)g(the)f(initial)h(non-assignmen)m(t)g(w)m(ord)f(on)g(the)g(line,)i
+(or)e(after)h(a)f(command)630 3258 y(delimiter)41 b(suc)m(h)g(as)f(`)p
+Ft(;)p Fu(')h(or)g(`)p Ft(|)p Fu(',)i(whic)m(h)e(is)f(usually)h
+(command)f(name)h(completion.)72 b(If)630 3367 y(m)m(ultiple)26
+b(options)g(are)g(supplied,)g(the)f Ft(-D)g Fu(option)h(tak)m(es)i
+(precedence)e(o)m(v)m(er)g Ft(-E)p Fu(,)h(and)e(b)s(oth)630
+3477 y(tak)m(e)34 b(precedence)f(o)m(v)m(er)h Ft(-I)p
+Fu(.)47 b(If)32 b(an)m(y)h(of)g Ft(-D)p Fu(,)g Ft(-E)p
+Fu(,)f(or)h Ft(-I)f Fu(are)h(supplied,)f(an)m(y)h(other)g
+Fr(name)630 3587 y Fu(argumen)m(ts)k(are)g(ignored;)j(these)d
+(completions)h(only)e(apply)g(to)i(the)f(case)g(sp)s(eci\014ed)f(b)m(y)
+630 3696 y(the)31 b(option.)630 3842 y(The)e(pro)s(cess)g(of)h
+(applying)g(these)g(completion)g(sp)s(eci\014cations)h(when)d(w)m(ord)i
+(completion)630 3952 y(is)35 b(attempted)h(is)f(describ)s(ed)f(ab)s(o)m
+(v)m(e)j(\(see)f(Section)g(8.6)g([Programmable)g(Completion],)630
+4061 y(page)31 b(137\).)630 4208 y(Other)d(options,)i(if)f(sp)s
+(eci\014ed,)g(ha)m(v)m(e)h(the)f(follo)m(wing)i(meanings.)40
+b(The)29 b(argumen)m(ts)g(to)h(the)630 4317 y Ft(-G)p
+Fu(,)41 b Ft(-W)p Fu(,)h(and)c Ft(-X)h Fu(options)h(\(and,)h(if)f
+(necessary)-8 b(,)42 b(the)e Ft(-P)f Fu(and)f Ft(-S)h
+Fu(options\))h(should)f(b)s(e)630 4427 y(quoted)28 b(to)h(protect)g
+(them)f(from)f(expansion)h(b)s(efore)g(the)g Ft(complete)e
+Fu(builtin)h(is)h(in)m(v)m(ok)m(ed.)630 4609 y Ft(-o)i
+Fj(comp-option)1110 4719 y Fu(The)c Fr(comp-option)i
+Fu(con)m(trols)g(sev)m(eral)h(asp)s(ects)e(of)g(the)g(compsp)s(ec's)g
+(b)s(eha)m(v-)1110 4829 y(ior)g(b)s(ey)m(ond)f(the)g(simple)h
+(generation)h(of)e(completions.)41 b Fr(comp-option)27
+b Fu(ma)m(y)1110 4938 y(b)s(e)j(one)g(of:)1110 5121 y
+Ft(bashdefault)1590 5230 y Fu(P)m(erform)d(the)h(rest)f(of)h(the)g
+(default)f(Bash)h(completions)g(if)g(the)1590 5340 y(compsp)s(ec)i
+(generates)i(no)e(matc)m(hes.)p eop end
+%%Page: 141 147
+TeXDict begin 141 146 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(141)1110 299 y Ft(default)144
+b Fu(Use)22 b(Readline's)g(default)g(\014lename)g(completion)g(if)g
+(the)g(comp-)1590 408 y(sp)s(ec)30 b(generates)i(no)e(matc)m(hes.)1110
+570 y Ft(dirnames)96 b Fu(P)m(erform)46 b(directory)g(name)h
+(completion)g(if)f(the)g(compsp)s(ec)1590 680 y(generates)32
+b(no)e(matc)m(hes.)1110 841 y Ft(filenames)1590 951 y
+Fu(T)-8 b(ell)40 b(Readline)f(that)h(the)f(compsp)s(ec)f(generates)j
+(\014lenames,)1590 1060 y(so)29 b(it)h(can)f(p)s(erform)f(an)m(y)h
+(\014lename-sp)s(eci\014c)h(pro)s(cessing)e(\(lik)m(e)1590
+1170 y(adding)22 b(a)g(slash)g(to)h(directory)f(names,)i(quoting)f(sp)s
+(ecial)f(c)m(har-)1590 1279 y(acters,)39 b(or)d(suppressing)f(trailing)
+i(spaces\).)59 b(This)35 b(option)i(is)1590 1389 y(in)m(tended)30
+b(to)g(b)s(e)g(used)f(with)g(shell)i(functions)e(sp)s(eci\014ed)g(with)
+1590 1499 y Ft(-F)p Fu(.)1110 1660 y Ft(noquote)144 b
+Fu(T)-8 b(ell)28 b(Readline)g(not)g(to)g(quote)g(the)g(completed)g(w)m
+(ords)f(if)h(they)1590 1770 y(are)j(\014lenames)f(\(quoting)h
+(\014lenames)g(is)f(the)h(default\).)1110 1931 y Ft(nosort)192
+b Fu(T)-8 b(ell)23 b(Readline)g(not)f(to)h(sort)g(the)f(list)h(of)f(p)s
+(ossible)g(completions)1590 2041 y(alphab)s(etically)-8
+b(.)1110 2202 y Ft(nospace)144 b Fu(T)-8 b(ell)40 b(Readline)g(not)g
+(to)g(app)s(end)d(a)j(space)g(\(the)f(default\))h(to)1590
+2312 y(w)m(ords)30 b(completed)h(at)g(the)g(end)f(of)g(the)h(line.)1110
+2473 y Ft(plusdirs)96 b Fu(After)30 b(an)m(y)h(matc)m(hes)g(de\014ned)d
+(b)m(y)i(the)g(compsp)s(ec)g(are)g(gener-)1590 2583 y(ated,)g
+(directory)f(name)g(completion)i(is)d(attempted)i(and)f(an)m(y)1590
+2693 y(matc)m(hes)j(are)e(added)g(to)h(the)g(results)f(of)g(the)h
+(other)g(actions.)630 2854 y Ft(-A)f Fj(action)66 b Fu(The)25
+b Fr(action)h Fu(ma)m(y)g(b)s(e)e(one)h(of)h(the)f(follo)m(wing)i(to)e
+(generate)i(a)e(list)h(of)f(p)s(ossible)1110 2964 y(completions:)1110
+3125 y Ft(alias)240 b Fu(Alias)31 b(names.)41 b(Ma)m(y)31
+b(also)h(b)s(e)e(sp)s(eci\014ed)f(as)i Ft(-a)p Fu(.)1110
+3287 y Ft(arrayvar)96 b Fu(Arra)m(y)31 b(v)-5 b(ariable)31
+b(names.)1110 3448 y Ft(binding)144 b Fu(Readline)30
+b(k)m(ey)f(binding)f(names)h(\(see)h(Section)f(8.4)h([Bindable)1590
+3558 y(Readline)h(Commands],)f(page)h(127\).)1110 3719
+y Ft(builtin)144 b Fu(Names)21 b(of)g(shell)f(builtin)h(commands.)37
+b(Ma)m(y)21 b(also)h(b)s(e)e(sp)s(eci\014ed)1590 3829
+y(as)31 b Ft(-b)p Fu(.)1110 3990 y Ft(command)144 b Fu(Command)29
+b(names.)41 b(Ma)m(y)32 b(also)f(b)s(e)f(sp)s(eci\014ed)f(as)i
+Ft(-c)p Fu(.)1110 4152 y Ft(directory)1590 4261 y Fu(Directory)h
+(names.)40 b(Ma)m(y)32 b(also)f(b)s(e)f(sp)s(eci\014ed)g(as)g
+Ft(-d)p Fu(.)1110 4423 y Ft(disabled)96 b Fu(Names)31
+b(of)g(disabled)f(shell)g(builtins.)1110 4584 y Ft(enabled)144
+b Fu(Names)31 b(of)g(enabled)f(shell)g(builtins.)1110
+4746 y Ft(export)192 b Fu(Names)34 b(of)f(exp)s(orted)f(shell)h(v)-5
+b(ariables.)49 b(Ma)m(y)35 b(also)e(b)s(e)g(sp)s(eci-)1590
+4855 y(\014ed)d(as)g Ft(-e)p Fu(.)1110 5017 y Ft(file)288
+b Fu(File)32 b(names.)40 b(Ma)m(y)32 b(also)f(b)s(e)f(sp)s(eci\014ed)f
+(as)i Ft(-f)p Fu(.)1110 5178 y Ft(function)96 b Fu(Names)31
+b(of)g(shell)f(functions.)1110 5340 y Ft(group)240 b
+Fu(Group)30 b(names.)40 b(Ma)m(y)32 b(also)f(b)s(e)f(sp)s(eci\014ed)g
+(as)g Ft(-g)p Fu(.)p eop end
+%%Page: 142 148
+TeXDict begin 142 147 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(142)1110 299 y Ft(helptopic)1590
+408 y Fu(Help)37 b(topics)g(as)g(accepted)h(b)m(y)e(the)h
+Ft(help)f Fu(builtin)g(\(see)h(Sec-)1590 518 y(tion)31
+b(4.2)g([Bash)g(Builtins],)g(page)g(51\).)1110 689 y
+Ft(hostname)96 b Fu(Hostnames,)89 b(as)76 b(tak)m(en)h(from)f(the)g
+(\014le)h(sp)s(eci\014ed)e(b)m(y)1590 799 y(the)55 b
+Ft(HOSTFILE)e Fu(shell)j(v)-5 b(ariable)56 b(\(see)g(Section)g(5.2)h
+([Bash)1590 908 y(V)-8 b(ariables],)32 b(page)f(73\).)1110
+1080 y Ft(job)336 b Fu(Job)31 b(names,)h(if)g(job)f(con)m(trol)i(is)f
+(activ)m(e.)46 b(Ma)m(y)33 b(also)g(b)s(e)e(sp)s(eci-)1590
+1189 y(\014ed)f(as)g Ft(-j)p Fu(.)1110 1361 y Ft(keyword)144
+b Fu(Shell)30 b(reserv)m(ed)h(w)m(ords.)40 b(Ma)m(y)32
+b(also)f(b)s(e)f(sp)s(eci\014ed)f(as)i Ft(-k)p Fu(.)1110
+1532 y Ft(running)144 b Fu(Names)31 b(of)g(running)d(jobs,)i(if)h(job)f
+(con)m(trol)h(is)g(activ)m(e.)1110 1703 y Ft(service)144
+b Fu(Service)31 b(names.)41 b(Ma)m(y)31 b(also)g(b)s(e)f(sp)s
+(eci\014ed)g(as)g Ft(-s)p Fu(.)1110 1874 y Ft(setopt)192
+b Fu(V)-8 b(alid)39 b(argumen)m(ts)g(for)f(the)h Ft(-o)e
+Fu(option)i(to)g(the)g Ft(set)e Fu(builtin)1590 1984
+y(\(see)31 b(Section)h(4.3.1)g([The)e(Set)g(Builtin],)i(page)f(62\).)
+1110 2155 y Ft(shopt)240 b Fu(Shell)40 b(option)g(names)g(as)g
+(accepted)i(b)m(y)e(the)g Ft(shopt)e Fu(builtin)1590
+2265 y(\(see)31 b(Section)h(4.2)f([Bash)g(Builtins],)g(page)g(51\).)
+1110 2436 y Ft(signal)192 b Fu(Signal)31 b(names.)1110
+2607 y Ft(stopped)144 b Fu(Names)31 b(of)g(stopp)s(ed)e(jobs,)h(if)g
+(job)g(con)m(trol)i(is)f(activ)m(e.)1110 2778 y Ft(user)288
+b Fu(User)30 b(names.)41 b(Ma)m(y)32 b(also)f(b)s(e)f(sp)s(eci\014ed)f
+(as)i Ft(-u)p Fu(.)1110 2950 y Ft(variable)96 b Fu(Names)36
+b(of)g(all)g(shell)g(v)-5 b(ariables.)56 b(Ma)m(y)37
+b(also)f(b)s(e)f(sp)s(eci\014ed)g(as)1590 3059 y Ft(-v)p
+Fu(.)630 3230 y Ft(-C)30 b Fj(command)1110 3340 y Fr(command)35
+b Fu(is)e(executed)g(in)e(a)i(subshell)e(en)m(vironmen)m(t,)i(and)f
+(its)g(output)g(is)1110 3450 y(used)e(as)g(the)h(p)s(ossible)f
+(completions.)630 3621 y Ft(-F)g Fj(function)1110 3730
+y Fu(The)39 b(shell)g(function)g Fr(function)g Fu(is)g(executed)h(in)f
+(the)g(curren)m(t)g(shell)g(en)m(vi-)1110 3840 y(ronmen)m(t.)72
+b(When)41 b(it)g(is)g(executed,)k($1)c(is)g(the)g(name)g(of)g(the)g
+(command)1110 3950 y(whose)34 b(argumen)m(ts)h(are)g(b)s(eing)f
+(completed,)j($2)e(is)f(the)h(w)m(ord)f(b)s(eing)g(com-)1110
+4059 y(pleted,)44 b(and)c($3)i(is)e(the)h(w)m(ord)g(preceding)f(the)h
+(w)m(ord)f(b)s(eing)h(completed,)1110 4169 y(as)g(describ)s(ed)f(ab)s
+(o)m(v)m(e)i(\(see)g(Section)f(8.6)h([Programmable)g(Completion],)1110
+4278 y(page)30 b(137\).)42 b(When)29 b(it)h(\014nishes,)e(the)h(p)s
+(ossible)g(completions)h(are)g(retriev)m(ed)1110 4388
+y(from)g(the)g(v)-5 b(alue)31 b(of)g(the)f Ft(COMPREPLY)e
+Fu(arra)m(y)j(v)-5 b(ariable.)630 4559 y Ft(-G)30 b Fj(globpat)1110
+4669 y Fu(The)39 b(\014lename)h(expansion)g(pattern)g
+Fr(globpat)j Fu(is)d(expanded)f(to)h(generate)1110 4778
+y(the)31 b(p)s(ossible)e(completions.)630 4950 y Ft(-P)h
+Fj(prefix)66 b Fr(pre\014x)39 b Fu(is)34 b(added)f(at)i(the)f(b)s
+(eginning)f(of)i(eac)m(h)g(p)s(ossible)e(completion)i(after)1110
+5059 y(all)c(other)g(options)g(ha)m(v)m(e)g(b)s(een)f(applied.)630
+5230 y Ft(-S)g Fj(suffix)66 b Fr(su\016x)26 b Fu(is)20
+b(app)s(ended)f(to)i(eac)m(h)h(p)s(ossible)e(completion)i(after)f(all)g
+(other)g(options)1110 5340 y(ha)m(v)m(e)32 b(b)s(een)d(applied.)p
+eop end
+%%Page: 143 149
+TeXDict begin 143 148 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(143)630 299 y Ft(-W)30
+b Fj(wordlist)1110 408 y Fu(The)24 b Fr(w)m(ordlist)k
+Fu(is)d(split)g(using)f(the)h(c)m(haracters)i(in)d(the)i
+Ft(IFS)e Fu(sp)s(ecial)h(v)-5 b(ariable)1110 518 y(as)36
+b(delimiters,)i(and)e(eac)m(h)h(resultan)m(t)g(w)m(ord)e(is)h
+(expanded.)57 b(The)35 b(p)s(ossible)1110 628 y(completions)c(are)e
+(the)h(mem)m(b)s(ers)f(of)g(the)h(resultan)m(t)g(list)g(whic)m(h)f
+(matc)m(h)i(the)1110 737 y(w)m(ord)f(b)s(eing)g(completed.)630
+909 y Ft(-X)g Fj(filterpat)1110 1019 y Fr(\014lterpat)d
+Fu(is)e(a)g(pattern)g(as)f(used)g(for)h(\014lename)g(expansion.)38
+b(It)25 b(is)g(applied)f(to)1110 1128 y(the)30 b(list)f(of)h(p)s
+(ossible)f(completions)h(generated)h(b)m(y)e(the)g(preceding)h(options)
+1110 1238 y(and)d(argumen)m(ts,)i(and)e(eac)m(h)i(completion)g(matc)m
+(hing)g Fr(\014lterpat)h Fu(is)e(remo)m(v)m(ed)1110 1347
+y(from)i(the)h(list.)42 b(A)30 b(leading)i(`)p Ft(!)p
+Fu(')e(in)g Fr(\014lterpat)j Fu(negates)f(the)f(pattern;)g(in)f(this)
+1110 1457 y(case,)i(an)m(y)e(completion)i(not)f(matc)m(hing)g
+Fr(\014lterpat)i Fu(is)d(remo)m(v)m(ed.)630 1629 y(The)35
+b(return)g(v)-5 b(alue)37 b(is)f(true)f(unless)h(an)f(in)m(v)-5
+b(alid)37 b(option)f(is)g(supplied,)g(an)g(option)h(other)630
+1738 y(than)h Ft(-p)g Fu(or)g Ft(-r)f Fu(is)h(supplied)f(without)i(a)f
+Fr(name)44 b Fu(argumen)m(t,)c(an)e(attempt)i(is)e(made)g(to)630
+1848 y(remo)m(v)m(e)32 b(a)e(completion)i(sp)s(eci\014cation)f(for)f(a)
+h Fr(name)k Fu(for)30 b(whic)m(h)g(no)g(sp)s(eci\014cation)h(exists,)
+630 1958 y(or)f(an)h(error)f(o)s(ccurs)g(adding)g(a)g(completion)i(sp)s
+(eci\014cation.)150 2129 y Ft(compopt)870 2270 y(compopt)46
+b([-o)h Fj(option)p Ft(])f([-DEI])g([+o)h Fj(option)p
+Ft(])e([)p Fj(name)p Ft(])630 2411 y Fu(Mo)s(dify)33
+b(completion)h(options)g(for)f(eac)m(h)h Fr(name)39 b
+Fu(according)34 b(to)g(the)f Fr(option)p Fu(s,)i(or)e(for)g(the)630
+2520 y(curren)m(tly-executing)46 b(completion)f(if)f(no)f
+Fr(name)5 b Fu(s)44 b(are)h(supplied.)80 b(If)43 b(no)h
+Fr(option)p Fu(s)h(are)630 2630 y(giv)m(en,)30 b(displa)m(y)e(the)g
+(completion)h(options)g(for)e(eac)m(h)i Fr(name)34 b
+Fu(or)27 b(the)i(curren)m(t)e(completion.)630 2740 y(The)f(p)s(ossible)
+g(v)-5 b(alues)27 b(of)f Fr(option)h Fu(are)g(those)g(v)-5
+b(alid)26 b(for)g(the)h Ft(complete)d Fu(builtin)i(describ)s(ed)630
+2849 y(ab)s(o)m(v)m(e.)41 b(The)27 b Ft(-D)f Fu(option)i(indicates)g
+(that)g(other)f(supplied)f(options)i(should)e(apply)h(to)h(the)630
+2959 y(\\default")33 b(command)f(completion;)i(that)f(is,)g(completion)
+g(attempted)g(on)f(a)g(command)630 3068 y(for)g(whic)m(h)g(no)g
+(completion)i(has)e(previously)g(b)s(een)g(de\014ned.)45
+b(The)32 b Ft(-E)f Fu(option)i(indicates)630 3178 y(that)23
+b(other)f(supplied)e(options)j(should)e(apply)g(to)i(\\empt)m(y")g
+(command)f(completion;)k(that)630 3287 y(is,)36 b(completion)g
+(attempted)g(on)e(a)h(blank)g(line.)54 b(The)34 b Ft(-I)g
+Fu(option)h(indicates)g(that)h(other)630 3397 y(supplied)23
+b(options)i(should)f(apply)g(to)i(completion)g(on)e(the)h(initial)h
+(non-assignmen)m(t)f(w)m(ord)630 3507 y(on)37 b(the)f(line,)j(or)e
+(after)g(a)g(command)f(delimiter)i(suc)m(h)e(as)h(`)p
+Ft(;)p Fu(')g(or)f(`)p Ft(|)p Fu(',)j(whic)m(h)e(is)f(usually)630
+3616 y(command)30 b(name)h(completion.)630 3757 y(If)k(m)m(ultiple)i
+(options)f(are)g(supplied,)g(the)g Ft(-D)g Fu(option)g(tak)m(es)h
+(precedence)g(o)m(v)m(er)g Ft(-E)p Fu(,)g(and)630 3867
+y(b)s(oth)30 b(tak)m(e)i(precedence)e(o)m(v)m(er)i Ft(-I)630
+4007 y Fu(The)23 b(return)g(v)-5 b(alue)25 b(is)f(true)g(unless)f(an)h
+(in)m(v)-5 b(alid)24 b(option)h(is)f(supplied,)g(an)g(attempt)h(is)f
+(made)630 4117 y(to)32 b(mo)s(dify)f(the)g(options)h(for)f(a)h
+Fr(name)k Fu(for)31 b(whic)m(h)g(no)g(completion)i(sp)s(eci\014cation)f
+(exists,)630 4226 y(or)e(an)h(output)f(error)g(o)s(ccurs.)150
+4486 y Fs(8.8)68 b(A)44 b(Programmable)j(Completion)f(Example)150
+4645 y Fu(The)37 b(most)g(common)g(w)m(a)m(y)i(to)e(obtain)h
+(additional)g(completion)g(functionalit)m(y)h(b)s(ey)m(ond)d(the)i
+(default)150 4755 y(actions)29 b Ft(complete)d Fu(and)i
+Ft(compgen)e Fu(pro)m(vide)i(is)h(to)f(use)g(a)h(shell)f(function)g
+(and)g(bind)e(it)j(to)g(a)g(particular)150 4864 y(command)h(using)g
+Ft(complete)e(-F)p Fu(.)275 5011 y(The)j(follo)m(wing)j(function)e(pro)
+m(vides)g(completions)i(for)e(the)g Ft(cd)g Fu(builtin.)46
+b(It)32 b(is)h(a)f(reasonably)h(go)s(o)s(d)150 5121 y(example)41
+b(of)g(what)f(shell)h(functions)f(m)m(ust)g(do)h(when)e(used)h(for)g
+(completion.)73 b(This)39 b(function)h(uses)150 5230
+y(the)32 b(w)m(ord)f(passed)g(as)h Ft($2)f Fu(to)h(determine)g(the)f
+(directory)h(name)g(to)g(complete.)46 b(Y)-8 b(ou)32
+b(can)g(also)g(use)g(the)150 5340 y Ft(COMP_WORDS)c Fu(arra)m(y)i(v)-5
+b(ariable;)32 b(the)e(curren)m(t)h(w)m(ord)f(is)g(indexed)g(b)m(y)g
+(the)h Ft(COMP_CWORD)c Fu(v)-5 b(ariable.)p eop end
+%%Page: 144 150
+TeXDict begin 144 149 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(144)275 299 y(The)42
+b(function)h(relies)h(on)e(the)i Ft(complete)c Fu(and)j
+Ft(compgen)e Fu(builtins)h(to)i(do)f(m)m(uc)m(h)g(of)g(the)h(w)m(ork,)
+150 408 y(adding)25 b(only)h(the)g(things)g(that)g(the)g(Bash)g
+Ft(cd)f Fu(do)s(es)g(b)s(ey)m(ond)g(accepting)j(basic)e(directory)g
+(names:)38 b(tilde)150 518 y(expansion)22 b(\(see)h(Section)g(3.5.2)g
+([Tilde)g(Expansion],)g(page)g(24\),)i(searc)m(hing)e(directories)g(in)
+e Fr($CDP)-8 b(A)g(TH)p Fu(,)150 628 y(whic)m(h)21 b(is)h(describ)s(ed)
+e(ab)s(o)m(v)m(e)j(\(see)f(Section)h(4.1)f([Bourne)g(Shell)f
+(Builtins],)j(page)e(44\),)j(and)c(basic)h(supp)s(ort)150
+737 y(for)31 b(the)h Ft(cdable_vars)d Fu(shell)i(option)h(\(see)h
+(Section)f(4.3.2)i([The)d(Shopt)g(Builtin],)i(page)f(66\).)46
+b Ft(_comp_)150 847 y(cd)30 b Fu(mo)s(di\014es)g(the)h(v)-5
+b(alue)31 b(of)g Fr(IFS)36 b Fu(so)31 b(that)g(it)g(con)m(tains)h(only)
+f(a)g(newline)g(to)h(accommo)s(date)g(\014le)f(names)150
+956 y(con)m(taining)i(spaces)g(and)e(tabs)h({)g Ft(compgen)e
+Fu(prin)m(ts)h(the)h(p)s(ossible)f(completions)i(it)g(generates)g(one)f
+(p)s(er)150 1066 y(line.)275 1230 y(P)m(ossible)24 b(completions)h(go)g
+(in)m(to)g(the)f Fr(COMPREPL)-8 b(Y)36 b Fu(arra)m(y)24
+b(v)-5 b(ariable,)26 b(one)e(completion)i(p)s(er)c(arra)m(y)150
+1340 y(elemen)m(t.)42 b(The)30 b(programmable)g(completion)i(system)e
+(retriev)m(es)h(the)g(completions)g(from)f(there)g(when)150
+1450 y(the)h(function)f(returns.)390 1614 y Ft(#)47 b(A)h(completion)d
+(function)g(for)i(the)g(cd)g(builtin)390 1724 y(#)g(based)g(on)g(the)g
+(cd)g(completion)e(function)h(from)g(the)h(bash_completion)d(package)
+390 1833 y(_comp_cd\(\))390 1943 y({)581 2052 y(local)i(IFS=$')g
+(\\t\\n')190 b(#)47 b(normalize)f(IFS)581 2162 y(local)g(cur)h
+(_skipdot)f(_cdpath)581 2271 y(local)g(i)i(j)f(k)581
+2491 y(#)g(Tilde)g(expansion,)e(which)h(also)h(expands)f(tilde)g(to)h
+(full)g(pathname)581 2600 y(case)g("$2")f(in)581 2710
+y(\\~*\))190 b(eval)46 b(cur="$2")g(;;)581 2819 y(*\))286
+b(cur=$2)46 b(;;)581 2929 y(esac)581 3148 y(#)h(no)h(cdpath)e(or)h
+(absolute)e(pathname)h(--)h(straight)f(directory)f(completion)581
+3258 y(if)i([[)g(-z)g("${CDPATH:-}")e(]])i(||)g([[)g("$cur")f(==)h
+(@\(./*|../*|/*\))d(]];)j(then)772 3367 y(#)g(compgen)f(prints)g(paths)
+h(one)f(per)h(line;)g(could)f(also)h(use)g(while)f(loop)772
+3477 y(IFS=$'\\n')772 3587 y(COMPREPLY=\()f($\(compgen)g(-d)i(--)g
+("$cur"\))f(\))772 3696 y(IFS=$')g(\\t\\n')581 3806 y(#)h
+(CDPATH+directories)c(in)k(the)g(current)f(directory)f(if)j(not)e(in)i
+(CDPATH)581 3915 y(else)772 4025 y(IFS=$'\\n')772 4134
+y(_skipdot=false)772 4244 y(#)f(preprocess)e(CDPATH)h(to)i(convert)d
+(null)i(directory)e(names)i(to)g(.)772 4354 y(_cdpath=${CDPATH/#:/.:})
+772 4463 y(_cdpath=${_cdpath//::/:.)o(:})772 4573 y
+(_cdpath=${_cdpath/\045:/:.})772 4682 y(for)g(i)g(in)g
+(${_cdpath//:/$'\\n'};)c(do)963 4792 y(if)k([[)g($i)g(-ef)g(.)h(]];)f
+(then)f(_skipdot=true;)e(fi)963 4902 y(k="${#COMPREPLY[@]}")963
+5011 y(for)j(j)g(in)g($\()g(compgen)f(-d)h(--)h("$i/$cur")d(\);)i(do)
+1154 5121 y(COMPREPLY[k++]=${j#$i/})375 b(#)48 b(cut)f(off)f(directory)
+963 5230 y(done)772 5340 y(done)p eop end
+%%Page: 145 151
+TeXDict begin 145 150 bop 150 -116 a Fu(Chapter)30 b(8:)41
+b(Command)29 b(Line)i(Editing)2062 b(145)772 299 y Ft($_skipdot)45
+b(||)i(COMPREPLY+=\()e($\(compgen)g(-d)i(--)g("$cur"\))f(\))772
+408 y(IFS=$')g(\\t\\n')581 518 y(fi)581 737 y(#)h(variable)f(names)g
+(if)h(appropriate)e(shell)i(option)f(set)h(and)f(no)i(completions)581
+847 y(if)f(shopt)f(-q)i(cdable_vars)c(&&)k([[)f(${#COMPREPLY[@]})c(-eq)
+k(0)g(]];)g(then)772 956 y(COMPREPLY=\()e($\(compgen)g(-v)i(--)g
+("$cur"\))f(\))581 1066 y(fi)581 1285 y(return)g(0)390
+1395 y(})275 1529 y Fu(W)-8 b(e)31 b(install)g(the)g(completion)h
+(function)e(using)f(the)i Ft(-F)f Fu(option)h(to)g Ft(complete)p
+Fu(:)390 1664 y Ft(#)47 b(Tell)g(readline)f(to)h(quote)f(appropriate)f
+(and)i(append)f(slashes)g(to)h(directories;)390 1773
+y(#)g(use)g(the)g(bash)g(default)f(completion)f(for)i(other)f
+(arguments)390 1883 y(complete)g(-o)h(filenames)e(-o)i(nospace)f(-o)h
+(bashdefault)e(-F)i(_comp_cd)f(cd)150 2017 y Fu(Since)33
+b(w)m(e'd)g(lik)m(e)i(Bash)e(and)f(Readline)i(to)g(tak)m(e)g(care)g(of)
+f(some)h(of)f(the)g(other)h(details)g(for)e(us,)i(w)m(e)f(use)150
+2127 y(sev)m(eral)43 b(other)g(options)f(to)h(tell)g(Bash)f(and)f
+(Readline)i(what)f(to)g(do.)76 b(The)41 b Ft(-o)30 b(filenames)39
+b Fu(option)150 2237 y(tells)j(Readline)g(that)g(the)f(p)s(ossible)g
+(completions)h(should)f(b)s(e)f(treated)i(as)g(\014lenames,)i(and)d
+(quoted)150 2346 y(appropriately)-8 b(.)53 b(That)34
+b(option)h(will)g(also)g(cause)g(Readline)g(to)g(app)s(end)e(a)h(slash)
+g(to)h(\014lenames)g(it)g(can)150 2456 y(determine)i(are)g(directories)
+h(\(whic)m(h)g(is)f(wh)m(y)f(w)m(e)i(migh)m(t)f(w)m(an)m(t)h(to)g
+(extend)f Ft(_comp_cd)e Fu(to)i(app)s(end)f(a)150 2565
+y(slash)22 b(if)g(w)m(e're)h(using)f(directories)h(found)e(via)i
+Fr(CDP)-8 b(A)g(TH)10 b Fu(:)37 b(Readline)23 b(can't)g(tell)g(those)g
+(completions)h(are)150 2675 y(directories\).)45 b(The)31
+b Ft(-o)f(nospace)f Fu(option)j(tells)g(Readline)g(to)h(not)e(app)s
+(end)f(a)i(space)g(c)m(haracter)h(to)f(the)150 2785 y(directory)c
+(name,)h(in)f(case)h(w)m(e)f(w)m(an)m(t)h(to)f(app)s(end)f(to)h(it.)41
+b(The)27 b Ft(-o)j(bashdefault)25 b Fu(option)j(brings)f(in)h(the)150
+2894 y(rest)h(of)f(the)h Ft(")p Fu(Bash)f(default)p Ft(")h
+Fu(completions)g({)g(p)s(ossible)f(completion)i(that)f(Bash)f(adds)g
+(to)h(the)g(default)150 3004 y(Readline)f(set.)40 b(These)28
+b(include)f(things)g(lik)m(e)i(command)e(name)h(completion,)h(v)-5
+b(ariable)28 b(completion)h(for)150 3113 y(w)m(ords)e(b)s(eginning)h
+(with)f(`)p Ft($)p Fu(')h(or)g(`)p Ft(${)p Fu(',)h(completions)g(con)m
+(taining)g(pathname)f(expansion)g(patterns)g(\(see)150
+3223 y(Section)j(3.5.8)h([Filename)g(Expansion],)e(page)i(33\),)f(and)f
+(so)h(on.)275 3357 y(Once)39 b(installed)i(using)e Ft(complete)p
+Fu(,)h Ft(_comp_cd)d Fu(will)j(b)s(e)g(called)g(ev)m(ery)h(time)f(w)m
+(e)g(attempt)h(w)m(ord)150 3467 y(completion)32 b(for)e(a)h
+Ft(cd)e Fu(command.)275 3601 y(Man)m(y)34 b(more)g(examples)g({)g(an)g
+(extensiv)m(e)h(collection)i(of)c(completions)i(for)f(most)g(of)g(the)g
+(common)150 3711 y(GNU,)g(Unix,)h(and)d(Lin)m(ux)h(commands)g({)h(are)g
+(a)m(v)-5 b(ailable)36 b(as)e(part)f(of)h(the)f(bash)p
+2943 3711 28 4 v 39 w(completion)i(pro)5 b(ject.)150
+3821 y(This)33 b(is)h(installed)h(b)m(y)f(default)g(on)g(man)m(y)h
+(GNU/Lin)m(ux)f(distributions.)51 b(Originally)35 b(written)f(b)m(y)g
+(Ian)150 3930 y(Macdonald,)48 b(the)c(pro)5 b(ject)44
+b(no)m(w)g(liv)m(es)h(at)f Ft(https:)11 b(/)g(/)g(github)g(.)g(com)g(/)
+g(sc)o(op)g(/)f(bash)o(-co)o(mple)o(tion)g(/)h Fu(.)150
+4040 y(There)30 b(are)h(p)s(orts)e(for)h(other)h(systems)f(suc)m(h)g
+(as)h(Solaris)g(and)f(Mac)h(OS)f(X.)275 4174 y(An)54
+b(older)h(v)m(ersion)h(of)f(the)g(bash)p 1532 4174 V
+40 w(completion)h(pac)m(k)-5 b(age)57 b(is)e(distributed)f(with)h(bash)
+f(in)h(the)150 4284 y Ft(examples/complete)26 b Fu(sub)s(directory)-8
+b(.)p eop end
+%%Page: 146 152
+TeXDict begin 146 151 bop 3614 -116 a Fu(146)150 299
+y Fp(9)80 b(Using)53 b(History)g(In)l(teractiv)l(ely)150
+554 y Fu(This)42 b(c)m(hapter)h(describ)s(es)f(ho)m(w)g(to)h(use)g(the)
+f Fm(gnu)h Fu(History)g(Library)e(in)m(teractiv)m(ely)-8
+b(,)50 b(from)42 b(a)h(user's)150 664 y(standp)s(oin)m(t.)76
+b(It)42 b(should)f(b)s(e)h(considered)g(a)g(user's)g(guide.)76
+b(F)-8 b(or)43 b(information)f(on)g(using)g(the)g Fm(gnu)150
+774 y Fu(History)31 b(Library)f(in)g(other)g(programs,)g(see)h(the)g
+Fm(gnu)f Fu(Readline)h(Library)f(Man)m(ual.)150 1025
+y Fs(9.1)68 b(Bash)45 b(History)h(F)-11 b(acilities)150
+1184 y Fu(When)44 b(the)g Ft(-o)30 b(history)42 b Fu(option)i(to)h(the)
+f Ft(set)f Fu(builtin)h(is)g(enabled)g(\(see)g(Section)h(4.3.1)h([The)e
+(Set)150 1294 y(Builtin],)32 b(page)g(62\),)h(the)e(shell)h(pro)m
+(vides)f(access)h(to)g(the)f Fr(command)g(history)p Fu(,)h(the)f(list)h
+(of)f(commands)150 1404 y(previously)h(t)m(yp)s(ed.)47
+b(The)33 b(v)-5 b(alue)33 b(of)f(the)h Ft(HISTSIZE)e
+Fu(shell)h(v)-5 b(ariable)34 b(is)f(used)e(as)i(the)g(n)m(um)m(b)s(er)e
+(of)i(com-)150 1513 y(mands)i(to)i(sa)m(v)m(e)h(in)e(a)g(history)h
+(list.)58 b(The)36 b(text)h(of)g(the)f(last)h Ft($HISTSIZE)d
+Fu(commands)i(\(default)g(500\))150 1623 y(is)h(sa)m(v)m(ed.)61
+b(The)36 b(shell)h(stores)h(eac)m(h)g(command)e(in)h(the)g(history)g
+(list)g(prior)f(to)i(parameter)f(and)f(v)-5 b(ari-)150
+1732 y(able)33 b(expansion)g(but)f(after)h(history)f(expansion)h(is)g
+(p)s(erformed,)e(sub)5 b(ject)33 b(to)g(the)g(v)-5 b(alues)33
+b(of)g(the)g(shell)150 1842 y(v)-5 b(ariables)31 b Ft(HISTIGNORE)d
+Fu(and)h Ft(HISTCONTROL)p Fu(.)275 1984 y(When)g(the)g(shell)h(starts)g
+(up,)f(the)h(history)f(is)h(initialized)h(from)e(the)h(\014le)f(named)g
+(b)m(y)h(the)f Ft(HISTFILE)150 2093 y Fu(v)-5 b(ariable)26
+b(\(default)g Ft(~/.bash_history)p Fu(\).)35 b(The)24
+b(\014le)i(named)e(b)m(y)h(the)h(v)-5 b(alue)25 b(of)h
+Ft(HISTFILE)c Fu(is)k(truncated,)150 2203 y(if)42 b(necessary)-8
+b(,)45 b(to)e(con)m(tain)g(no)f(more)g(than)f(the)h(n)m(um)m(b)s(er)f
+(of)h(lines)g(sp)s(eci\014ed)f(b)m(y)h(the)g(v)-5 b(alue)42
+b(of)g(the)150 2312 y Ft(HISTFILESIZE)28 b Fu(v)-5 b(ariable.)46
+b(When)31 b(a)h(shell)g(with)g(history)f(enabled)h(exits,)h(the)f(last)
+h Ft($HISTSIZE)c Fu(lines)150 2422 y(are)35 b(copied)g(from)g(the)g
+(history)f(list)i(to)f(the)g(\014le)g(named)f(b)m(y)h
+Ft($HISTFILE)p Fu(.)51 b(If)35 b(the)g Ft(histappend)d
+Fu(shell)150 2532 y(option)26 b(is)g(set)g(\(see)h(Section)f(4.2)h
+([Bash)f(Builtins],)h(page)g(51\),)h(the)e(lines)g(are)g(app)s(ended)e
+(to)i(the)g(history)150 2641 y(\014le,)36 b(otherwise)f(the)g(history)f
+(\014le)h(is)f(o)m(v)m(erwritten.)55 b(If)34 b Ft(HISTFILE)e
+Fu(is)j(unset,)g(or)g(if)f(the)h(history)f(\014le)h(is)150
+2751 y(un)m(writable,)f(the)f(history)g(is)g(not)h(sa)m(v)m(ed.)49
+b(After)34 b(sa)m(ving)g(the)f(history)-8 b(,)34 b(the)g(history)f
+(\014le)g(is)g(truncated)150 2860 y(to)g(con)m(tain)h(no)f(more)g(than)
+f Ft($HISTFILESIZE)d Fu(lines.)48 b(If)33 b Ft(HISTFILESIZE)c
+Fu(is)k(unset,)g(or)f(set)i(to)f(n)m(ull,)h(a)150 2970
+y(non-n)m(umeric)c(v)-5 b(alue,)31 b(or)f(a)h(n)m(umeric)f(v)-5
+b(alue)31 b(less)g(than)f(zero,)h(the)g(history)f(\014le)h(is)f(not)h
+(truncated.)275 3112 y(If)g(the)h Ft(HISTTIMEFORMAT)d
+Fu(is)j(set,)h(the)f(time)h(stamp)f(information)g(asso)s(ciated)i(with)
+e(eac)m(h)h(history)150 3221 y(en)m(try)d(is)h(written)f(to)h(the)f
+(history)h(\014le,)f(mark)m(ed)h(with)f(the)g(history)g(commen)m(t)h(c)
+m(haracter.)43 b(When)30 b(the)150 3331 y(history)22
+b(\014le)h(is)g(read,)h(lines)f(b)s(eginning)e(with)i(the)f(history)h
+(commen)m(t)g(c)m(haracter)h(follo)m(w)m(ed)h(immediately)150
+3440 y(b)m(y)30 b(a)h(digit)g(are)g(in)m(terpreted)g(as)f(timestamps)h
+(for)f(the)h(follo)m(wing)h(history)e(en)m(try)-8 b(.)275
+3582 y(The)19 b(builtin)h(command)g Ft(fc)g Fu(ma)m(y)h(b)s(e)f(used)f
+(to)i(list)g(or)g(edit)g(and)e(re-execute)j(a)f(p)s(ortion)f(of)g(the)h
+(history)150 3692 y(list.)41 b(The)27 b Ft(history)f
+Fu(builtin)i(ma)m(y)h(b)s(e)e(used)g(to)i(displa)m(y)g(or)f(mo)s(dify)f
+(the)h(history)g(list)h(and)f(manipulate)150 3801 y(the)j(history)g
+(\014le.)42 b(When)31 b(using)f(command-line)h(editing,)h(searc)m(h)f
+(commands)g(are)g(a)m(v)-5 b(ailable)33 b(in)e(eac)m(h)150
+3911 y(editing)45 b(mo)s(de)g(that)g(pro)m(vide)g(access)h(to)f(the)g
+(history)f(list)i(\(see)f(Section)h(8.4.2)g([Commands)e(F)-8
+b(or)150 4020 y(History],)31 b(page)h(128\).)275 4162
+y(The)47 b(shell)i(allo)m(ws)h(con)m(trol)f(o)m(v)m(er)h(whic)m(h)e
+(commands)g(are)h(sa)m(v)m(ed)g(on)f(the)h(history)f(list.)95
+b(The)150 4272 y Ft(HISTCONTROL)25 b Fu(and)j Ft(HISTIGNORE)e
+Fu(v)-5 b(ariables)29 b(ma)m(y)h(b)s(e)d(set)j(to)f(cause)g(the)g
+(shell)f(to)i(sa)m(v)m(e)g(only)f(a)g(subset)150 4381
+y(of)e(the)g(commands)f(en)m(tered.)40 b(The)26 b Ft(cmdhist)f
+Fu(shell)i(option,)h(if)f(enabled,)g(causes)h(the)e(shell)h(to)h
+(attempt)150 4491 y(to)23 b(sa)m(v)m(e)h(eac)m(h)f(line)g(of)f(a)h(m)m
+(ulti-line)g(command)f(in)g(the)h(same)f(history)g(en)m(try)-8
+b(,)25 b(adding)d(semicolons)h(where)150 4600 y(necessary)37
+b(to)f(preserv)m(e)h(syn)m(tactic)h(correctness.)58 b(The)36
+b Ft(lithist)e Fu(shell)i(option)h(causes)g(the)f(shell)g(to)150
+4710 y(sa)m(v)m(e)41 b(the)e(command)g(with)f(em)m(b)s(edded)g
+(newlines)h(instead)g(of)g(semicolons.)68 b(The)39 b
+Ft(shopt)e Fu(builtin)i(is)150 4820 y(used)30 b(to)i(set)g(these)g
+(options.)43 b(See)32 b(Section)g(4.3.2)h([The)e(Shopt)f(Builtin],)j
+(page)f(66,)g(for)f(a)h(description)150 4929 y(of)f Ft(shopt)p
+Fu(.)150 5181 y Fs(9.2)68 b(Bash)45 b(History)h(Builtins)150
+5340 y Fu(Bash)31 b(pro)m(vides)f(t)m(w)m(o)i(builtin)e(commands)g
+(whic)m(h)g(manipulate)g(the)h(history)f(list)h(and)f(history)g
+(\014le.)p eop end
+%%Page: 147 153
+TeXDict begin 147 152 bop 150 -116 a Fu(Chapter)30 b(9:)41
+b(Using)30 b(History)h(In)m(teractiv)m(ely)1925 b(147)150
+299 y Ft(fc)870 430 y(fc)47 b([-e)g Fj(ename)p Ft(])f([-lnr])g([)p
+Fj(first)p Ft(])g([)p Fj(last)p Ft(])870 540 y(fc)h(-s)g([)p
+Fj(pat)p Ft(=)p Fj(rep)p Ft(])f([)p Fj(command)p Ft(])630
+671 y Fu(The)32 b(\014rst)g(form)g(selects)j(a)e(range)g(of)f(commands)
+h(from)f Fr(\014rst)i Fu(to)f Fr(last)j Fu(from)c(the)h(history)630
+781 y(list)41 b(and)f(displa)m(ys)g(or)g(edits)h(and)e(re-executes)j
+(them.)71 b(Both)40 b Fr(\014rst)i Fu(and)e Fr(last)j
+Fu(ma)m(y)e(b)s(e)630 891 y(sp)s(eci\014ed)33 b(as)h(a)g(string)g(\(to)
+h(lo)s(cate)h(the)e(most)g(recen)m(t)h(command)f(b)s(eginning)f(with)g
+(that)630 1000 y(string\))28 b(or)g(as)h(a)f(n)m(um)m(b)s(er)f(\(an)h
+(index)g(in)m(to)h(the)f(history)g(list,)h(where)f(a)g(negativ)m(e)i(n)
+m(um)m(b)s(er)630 1110 y(is)g(used)g(as)h(an)f(o\013set)h(from)f(the)h
+(curren)m(t)f(command)g(n)m(um)m(b)s(er\).)630 1241 y(When)j(listing,)h
+(a)f Fr(\014rst)h Fu(or)f Fr(last)j Fu(of)d(0)g(is)g(equiv)-5
+b(alen)m(t)34 b(to)g(-1)f(and)g(-0)g(is)g(equiv)-5 b(alen)m(t)34
+b(to)g(the)630 1351 y(curren)m(t)k(command)h(\(usually)g(the)g
+Ft(fc)f Fu(command\);)43 b(otherwise)c(0)g(is)g(equiv)-5
+b(alen)m(t)40 b(to)f(-1)630 1461 y(and)30 b(-0)h(is)f(in)m(v)-5
+b(alid.)630 1592 y(If)33 b Fr(last)j Fu(is)e(not)f(sp)s(eci\014ed,)h
+(it)g(is)f(set)h(to)g Fr(\014rst)p Fu(.)49 b(If)33 b
+Fr(\014rst)i Fu(is)e(not)h(sp)s(eci\014ed,)f(it)h(is)g(set)g(to)g(the)
+630 1702 y(previous)g(command)f(for)h(editing)h(and)e
+Fq(\000)p Fu(16)i(for)f(listing.)53 b(If)33 b(the)h Ft(-l)g
+Fu(\015ag)g(is)g(giv)m(en,)j(the)630 1811 y(commands)27
+b(are)h(listed)g(on)f(standard)g(output.)39 b(The)27
+b Ft(-n)g Fu(\015ag)h(suppresses)e(the)h(command)630
+1921 y(n)m(um)m(b)s(ers)h(when)h(listing.)42 b(The)29
+b Ft(-r)g Fu(\015ag)i(rev)m(erses)f(the)g(order)f(of)i(the)f(listing.)
+41 b(Otherwise,)630 2030 y(the)i(editor)h(giv)m(en)g(b)m(y)f
+Fr(ename)49 b Fu(is)43 b(in)m(v)m(ok)m(ed)i(on)e(a)g(\014le)h(con)m
+(taining)g(those)g(commands.)630 2140 y(If)c Fr(ename)46
+b Fu(is)40 b(not)h(giv)m(en,)j(the)d(v)-5 b(alue)41 b(of)f(the)h(follo)
+m(wing)h(v)-5 b(ariable)41 b(expansion)f(is)g(used:)630
+2250 y Ft(${FCEDIT:-${EDITOR:-vi}})o Fu(.)34 b(This)25
+b(sa)m(ys)i(to)g(use)f(the)g(v)-5 b(alue)27 b(of)f(the)h
+Ft(FCEDIT)d Fu(v)-5 b(ariable)630 2359 y(if)33 b(set,)i(or)e(the)h(v)-5
+b(alue)33 b(of)h(the)f Ft(EDITOR)f Fu(v)-5 b(ariable)34
+b(if)f(that)h(is)f(set,)i(or)e Ft(vi)f Fu(if)i(neither)f(is)g(set.)630
+2469 y(When)d(editing)h(is)g(complete,)h(the)e(edited)h(commands)f(are)
+h(ec)m(ho)s(ed)g(and)e(executed.)630 2600 y(In)34 b(the)g(second)g
+(form,)h Fr(command)j Fu(is)c(re-executed)i(after)f(eac)m(h)g(instance)
+g(of)f Fr(pat)j Fu(in)d(the)630 2710 y(selected)29 b(command)e(is)h
+(replaced)f(b)m(y)h Fr(rep)p Fu(.)39 b Fr(command)31
+b Fu(is)c(in)m(terpreted)h(the)f(same)h(as)g Fr(\014rst)630
+2819 y Fu(ab)s(o)m(v)m(e.)630 2951 y(A)j(useful)f(alias)i(to)g(use)e
+(with)h(the)g Ft(fc)f Fu(command)h(is)g Ft(r='fc)e(-s')p
+Fu(,)h(so)h(that)h(t)m(yping)f(`)p Ft(r)f(cc)p Fu(')630
+3061 y(runs)35 b(the)h(last)h(command)f(b)s(eginning)g(with)g
+Ft(cc)f Fu(and)h(t)m(yping)g(`)p Ft(r)p Fu(')h(re-executes)h(the)e
+(last)630 3170 y(command)30 b(\(see)h(Section)h(6.6)f([Aliases],)h
+(page)g(94\).)150 3324 y Ft(history)870 3455 y(history)46
+b([)p Fj(n)p Ft(])870 3565 y(history)g(-c)870 3674 y(history)g(-d)h
+Fj(offset)870 3784 y Ft(history)f(-d)h Fj(start)p Ft(-)p
+Fj(end)870 3893 y Ft(history)f([-anrw])g([)p Fj(filename)p
+Ft(])870 4003 y(history)g(-ps)h Fj(arg)630 4134 y Fu(With)26
+b(no)g(options,)h(displa)m(y)f(the)g(history)g(list)g(with)f(line)h(n)m
+(um)m(b)s(ers.)38 b(Lines)26 b(pre\014xed)e(with)630
+4244 y(a)35 b(`)p Ft(*)p Fu(')g(ha)m(v)m(e)h(b)s(een)e(mo)s(di\014ed.)
+53 b(An)34 b(argumen)m(t)h(of)g Fr(n)f Fu(lists)i(only)f(the)g(last)g
+Fr(n)f Fu(lines.)54 b(If)35 b(the)630 4354 y(shell)30
+b(v)-5 b(ariable)31 b Ft(HISTTIMEFORMAT)26 b Fu(is)k(set)h(and)e(not)i
+(n)m(ull,)f(it)h(is)f(used)f(as)h(a)h(format)f(string)630
+4463 y(for)36 b Fr(strftime)41 b Fu(to)36 b(displa)m(y)g(the)g(time)h
+(stamp)f(asso)s(ciated)h(with)f(eac)m(h)h(displa)m(y)m(ed)f(history)630
+4573 y(en)m(try)-8 b(.)47 b(No)33 b(in)m(terv)m(ening)g(blank)f(is)g
+(prin)m(ted)g(b)s(et)m(w)m(een)h(the)g(formatted)f(time)h(stamp)g(and)
+630 4682 y(the)e(history)f(line.)630 4814 y(Options,)g(if)h(supplied,)e
+(ha)m(v)m(e)i(the)g(follo)m(wing)h(meanings:)630 4967
+y Ft(-c)384 b Fu(Clear)23 b(the)g(history)g(list.)39
+b(This)22 b(ma)m(y)i(b)s(e)e(com)m(bined)h(with)f(the)h(other)h
+(options)1110 5077 y(to)31 b(replace)g(the)g(history)f(list)h
+(completely)-8 b(.)630 5230 y Ft(-d)30 b Fj(offset)66
+b Fu(Delete)38 b(the)f(history)f(en)m(try)h(at)f(p)s(osition)h
+Fr(o\013set)p Fu(.)59 b(If)36 b Fr(o\013set)j Fu(is)d(p)s(ositiv)m(e,)j
+(it)1110 5340 y(should)32 b(b)s(e)h(sp)s(eci\014ed)f(as)i(it)g(app)s
+(ears)e(when)g(the)i(history)f(is)g(displa)m(y)m(ed.)50
+b(If)p eop end
+%%Page: 148 154
+TeXDict begin 148 153 bop 150 -116 a Fu(Chapter)30 b(9:)41
+b(Using)30 b(History)h(In)m(teractiv)m(ely)1925 b(148)1110
+299 y Fr(o\013set)26 b Fu(is)d(negativ)m(e,)k(it)c(is)g(in)m(terpreted)
+h(as)f(relativ)m(e)i(to)f(one)f(greater)h(than)f(the)1110
+408 y(last)36 b(history)f(p)s(osition,)h(so)f(negativ)m(e)i(indices)e
+(coun)m(t)h(bac)m(k)f(from)g(the)g(end)1110 518 y(of)h(the)g(history)-8
+b(,)37 b(and)e(an)h(index)f(of)h(`)p Ft(-1)p Fu(')f(refers)g(to)i(the)f
+(curren)m(t)f Ft(history)1110 628 y(-d)30 b Fu(command.)630
+785 y Ft(-d)g Fj(start)p Ft(-)p Fj(end)1110 895 y Fu(Delete)23
+b(the)d(history)h(en)m(tries)g(b)s(et)m(w)m(een)g(p)s(ositions)g
+Fr(start)i Fu(and)d Fr(end)p Fu(,)i(inclusiv)m(e.)1110
+1004 y(P)m(ositiv)m(e)41 b(and)c(negativ)m(e)k(v)-5 b(alues)38
+b(for)h Fr(start)h Fu(and)e Fr(end)j Fu(are)e(in)m(terpreted)g(as)1110
+1114 y(describ)s(ed)29 b(ab)s(o)m(v)m(e.)630 1271 y Ft(-a)384
+b Fu(App)s(end)28 b(the)i(new)f(history)g(lines)h(to)h(the)e(history)h
+(\014le.)41 b(These)29 b(are)h(history)1110 1381 y(lines)36
+b(en)m(tered)g(since)f(the)h(b)s(eginning)f(of)g(the)h(curren)m(t)f
+(Bash)h(session,)h(but)1110 1490 y(not)31 b(already)g(app)s(ended)d(to)
+j(the)g(history)f(\014le.)630 1648 y Ft(-n)384 b Fu(App)s(end)32
+b(the)i(history)f(lines)h(not)g(already)g(read)g(from)f(the)h(history)f
+(\014le)h(to)1110 1758 y(the)26 b(curren)m(t)f(history)g(list.)40
+b(These)25 b(are)h(lines)g(app)s(ended)e(to)i(the)f(history)h(\014le)
+1110 1867 y(since)31 b(the)f(b)s(eginning)g(of)g(the)h(curren)m(t)f
+(Bash)h(session.)630 2025 y Ft(-r)384 b Fu(Read)31 b(the)f(history)g
+(\014le)h(and)f(app)s(end)e(its)j(con)m(ten)m(ts)h(to)f(the)g(history)f
+(list.)630 2182 y Ft(-w)384 b Fu(W)-8 b(rite)32 b(out)e(the)h(curren)m
+(t)f(history)g(list)h(to)h(the)e(history)g(\014le.)630
+2339 y Ft(-p)384 b Fu(P)m(erform)31 b(history)f(substitution)h(on)f
+(the)h Fr(arg)8 b Fu(s)31 b(and)f(displa)m(y)h(the)f(result)h(on)1110
+2449 y(the)d(standard)f(output,)i(without)f(storing)g(the)g(results)g
+(in)g(the)g(history)g(list.)630 2606 y Ft(-s)384 b Fu(The)30
+b Fr(arg)8 b Fu(s)30 b(are)h(added)f(to)h(the)f(end)g(of)h(the)f
+(history)h(list)g(as)f(a)h(single)g(en)m(try)-8 b(.)630
+2764 y(When)26 b(an)m(y)h(of)f(the)g Ft(-w)p Fu(,)h Ft(-r)p
+Fu(,)g Ft(-a)p Fu(,)g(or)f Ft(-n)f Fu(options)i(is)f(used,)h(if)f
+Fr(\014lename)32 b Fu(is)26 b(giv)m(en,)i(then)e(it)h(is)630
+2873 y(used)h(as)g(the)h(history)f(\014le.)40 b(If)28
+b(not,)i(then)e(the)g(v)-5 b(alue)29 b(of)g(the)g Ft(HISTFILE)d
+Fu(v)-5 b(ariable)29 b(is)f(used.)150 3112 y Fs(9.3)68
+b(History)46 b(Expansion)150 3272 y Fu(The)f(History)h(library)e(pro)m
+(vides)i(a)f(history)g(expansion)g(feature)h(that)g(is)f(similar)h(to)g
+(the)f(history)150 3381 y(expansion)g(pro)m(vided)f(b)m(y)h
+Ft(csh)p Fu(.)83 b(This)44 b(section)i(describ)s(es)e(the)h(syn)m(tax)h
+(used)e(to)i(manipulate)f(the)150 3491 y(history)30 b(information.)275
+3624 y(History)h(expansions)f(in)m(tro)s(duce)g(w)m(ords)g(from)g(the)h
+(history)f(list)h(in)m(to)g(the)g(input)f(stream,)h(making)150
+3734 y(it)g(easy)g(to)g(rep)s(eat)g(commands,)f(insert)g(the)h(argumen)
+m(ts)f(to)h(a)g(previous)f(command)g(in)m(to)i(the)e(curren)m(t)150
+3844 y(input)f(line,)i(or)g(\014x)f(errors)f(in)h(previous)g(commands)g
+(quic)m(kly)-8 b(.)275 3977 y(History)24 b(expansion)f(is)h(p)s
+(erformed)e(immediately)j(after)f(a)g(complete)h(line)f(is)g(read,)h(b)
+s(efore)e(the)h(shell)150 4087 y(breaks)32 b(it)i(in)m(to)f(w)m(ords,)g
+(and)f(is)h(p)s(erformed)e(on)h(eac)m(h)i(line)f(individually)-8
+b(.)48 b(Bash)33 b(attempts)g(to)h(inform)150 4196 y(the)d(history)f
+(expansion)g(functions)g(ab)s(out)g(quoting)h(still)g(in)f(e\013ect)i
+(from)e(previous)g(lines.)275 4330 y(History)37 b(expansion)f(tak)m(es)
+i(place)g(in)e(t)m(w)m(o)i(parts.)59 b(The)36 b(\014rst)g(is)h(to)g
+(determine)g(whic)m(h)f(line)h(from)150 4439 y(the)42
+b(history)f(list)h(should)e(b)s(e)h(used)f(during)g(substitution.)74
+b(The)40 b(second)i(is)f(to)h(select)h(p)s(ortions)e(of)150
+4549 y(that)31 b(line)g(for)f(inclusion)h(in)m(to)g(the)g(curren)m(t)f
+(one.)42 b(The)30 b(line)h(selected)h(from)e(the)h(history)f(is)h
+(called)h(the)150 4659 y Fr(ev)m(en)m(t)p Fu(,)e(and)c(the)i(p)s
+(ortions)e(of)i(that)f(line)h(that)g(are)f(acted)i(up)s(on)c(are)j
+(called)g Fr(w)m(ords)p Fu(.)39 b(V)-8 b(arious)28 b
+Fr(mo)s(di\014ers)150 4768 y Fu(are)33 b(a)m(v)-5 b(ailable)36
+b(to)d(manipulate)h(the)f(selected)h(w)m(ords.)48 b(The)32
+b(line)i(is)f(brok)m(en)f(in)m(to)i(w)m(ords)f(in)f(the)i(same)150
+4878 y(fashion)23 b(that)g(Bash)g(do)s(es,)h(so)f(that)h(sev)m(eral)g
+(w)m(ords)e(surrounded)e(b)m(y)j(quotes)g(are)g(considered)g(one)g(w)m
+(ord.)150 4987 y(History)37 b(expansions)g(are)g(in)m(tro)s(duced)f(b)m
+(y)h(the)g(app)s(earance)g(of)g(the)g(history)f(expansion)h(c)m
+(haracter,)150 5097 y(whic)m(h)30 b(is)h(`)p Ft(!)p Fu(')f(b)m(y)g
+(default.)275 5230 y(History)c(expansion)g(implemen)m(ts)h(shell-lik)m
+(e)h(quoting)f(con)m(v)m(en)m(tions:)40 b(a)27 b(bac)m(kslash)g(can)f
+(b)s(e)g(used)f(to)150 5340 y(remo)m(v)m(e)h(the)e(sp)s(ecial)g
+(handling)g(for)g(the)g(next)g(c)m(haracter;)k(single)d(quotes)g
+(enclose)g(v)m(erbatim)g(sequences)p eop end
+%%Page: 149 155
+TeXDict begin 149 154 bop 150 -116 a Fu(Chapter)30 b(9:)41
+b(Using)30 b(History)h(In)m(teractiv)m(ely)1925 b(149)150
+299 y(of)29 b(c)m(haracters,)i(and)e(can)g(b)s(e)g(used)f(to)i(inhibit)
+f(history)g(expansion;)g(and)g(c)m(haracters)i(enclosed)e(within)150
+408 y(double)h(quotes)i(ma)m(y)f(b)s(e)f(sub)5 b(ject)31
+b(to)h(history)f(expansion,)g(since)g(bac)m(kslash)g(can)h(escap)s(e)f
+(the)g(history)150 518 y(expansion)e(c)m(haracter,)j(but)d(single)h
+(quotes)g(ma)m(y)h(not,)f(since)g(they)g(are)g(not)f(treated)i(sp)s
+(ecially)f(within)150 628 y(double)g(quotes.)275 765
+y(When)41 b(using)g(the)h(shell,)i(only)e(`)p Ft(\\)p
+Fu(')g(and)e(`)p Ft(')p Fu(')i(ma)m(y)g(b)s(e)f(used)g(to)h(escap)s(e)g
+(the)g(history)f(expansion)150 875 y(c)m(haracter,)e(but)34
+b(the)i(history)g(expansion)f(c)m(haracter)i(is)f(also)g(treated)h(as)e
+(quoted)h(if)g(it)g(immediately)150 984 y(precedes)30
+b(the)h(closing)g(double)f(quote)h(in)f(a)h(double-quoted)g(string.)275
+1122 y(Sev)m(eral)48 b(shell)g(options)h(settable)g(with)e(the)h
+Ft(shopt)f Fu(builtin)g(\(see)i(Section)f(4.3.2)i([The)e(Shopt)150
+1232 y(Builtin],)24 b(page)e(66\))h(ma)m(y)e(b)s(e)g(used)g(to)h
+(tailor)g(the)g(b)s(eha)m(vior)f(of)h(history)f(expansion.)37
+b(If)21 b(the)h Ft(histverify)150 1341 y Fu(shell)35
+b(option)f(is)h(enabled,)g(and)f(Readline)h(is)f(b)s(eing)g(used,)h
+(history)g(substitutions)e(are)i(not)g(immedi-)150 1451
+y(ately)i(passed)d(to)i(the)g(shell)f(parser.)55 b(Instead,)37
+b(the)e(expanded)g(line)g(is)h(reloaded)g(in)m(to)g(the)f(Readline)150
+1561 y(editing)29 b(bu\013er)f(for)h(further)e(mo)s(di\014cation.)41
+b(If)28 b(Readline)h(is)g(b)s(eing)f(used,)h(and)f(the)h
+Ft(histreedit)d Fu(shell)150 1670 y(option)e(is)g(enabled,)h(a)g
+(failed)f(history)g(expansion)g(will)g(b)s(e)f(reloaded)h(in)m(to)h
+(the)f(Readline)g(editing)h(bu\013er)150 1780 y(for)31
+b(correction.)43 b(The)30 b Ft(-p)g Fu(option)h(to)h(the)f
+Ft(history)e Fu(builtin)h(command)h(ma)m(y)g(b)s(e)f(used)g(to)i(see)f
+(what)g(a)150 1889 y(history)25 b(expansion)g(will)g(do)g(b)s(efore)g
+(using)f(it.)40 b(The)24 b Ft(-s)h Fu(option)g(to)h(the)f
+Ft(history)e Fu(builtin)i(ma)m(y)g(b)s(e)g(used)150 1999
+y(to)36 b(add)f(commands)g(to)h(the)g(end)f(of)g(the)h(history)f(list)i
+(without)e(actually)i(executing)g(them,)g(so)e(that)150
+2108 y(they)c(are)f(a)m(v)-5 b(ailable)33 b(for)d(subsequen)m(t)g
+(recall.)42 b(This)29 b(is)i(most)g(useful)e(in)h(conjunction)h(with)f
+(Readline.)275 2246 y(The)j(shell)h(allo)m(ws)h(con)m(trol)h(of)e(the)g
+(v)-5 b(arious)34 b(c)m(haracters)h(used)f(b)m(y)f(the)h(history)g
+(expansion)g(mec)m(h-)150 2356 y(anism)h(with)g(the)g
+Ft(histchars)d Fu(v)-5 b(ariable,)38 b(as)d(explained)g(ab)s(o)m(v)m(e)
+i(\(see)f(Section)f(5.2)i([Bash)e(V)-8 b(ariables],)150
+2465 y(page)32 b(73\).)44 b(The)31 b(shell)g(uses)g(the)g(history)g
+(commen)m(t)i(c)m(haracter)f(to)g(mark)f(history)g(timestamps)h(when)
+150 2575 y(writing)e(the)h(history)f(\014le.)150 2777
+y Fk(9.3.1)63 b(Ev)m(en)m(t)39 b(Designators)150 2924
+y Fu(An)32 b(ev)m(en)m(t)j(designator)e(is)g(a)g(reference)g(to)h(a)f
+(command)f(line)h(en)m(try)g(in)g(the)g(history)g(list.)48
+b(Unless)33 b(the)150 3034 y(reference)e(is)f(absolute,)i(ev)m(en)m(ts)
+f(are)g(relativ)m(e)i(to)e(the)f(curren)m(t)g(p)s(osition)h(in)f(the)h
+(history)f(list.)150 3198 y Ft(!)432 b Fu(Start)34 b(a)f(history)h
+(substitution,)g(except)g(when)f(follo)m(w)m(ed)i(b)m(y)e(a)h(space,)h
+(tab,)f(the)g(end)f(of)630 3308 y(the)i(line,)g(`)p Ft(=)p
+Fu(')g(or)f(`)p Ft(\()p Fu(')h(\(when)e(the)i Ft(extglob)d
+Fu(shell)j(option)f(is)h(enabled)f(using)g(the)g Ft(shopt)630
+3417 y Fu(builtin\).)150 3580 y Ft(!)p Fj(n)384 b Fu(Refer)30
+b(to)i(command)e(line)g Fr(n)p Fu(.)150 3742 y Ft(!-)p
+Fj(n)336 b Fu(Refer)30 b(to)i(the)e(command)g Fr(n)g
+Fu(lines)h(bac)m(k.)150 3905 y Ft(!!)384 b Fu(Refer)30
+b(to)i(the)e(previous)g(command.)40 b(This)30 b(is)g(a)h(synon)m(ym)f
+(for)g(`)p Ft(!-1)p Fu('.)150 4067 y Ft(!)p Fj(string)144
+b Fu(Refer)25 b(to)h(the)f(most)h(recen)m(t)g(command)f(preceding)g
+(the)g(curren)m(t)g(p)s(osition)g(in)g(the)g(history)630
+4177 y(list)31 b(starting)g(with)f Fr(string)p Fu(.)150
+4340 y Ft(!?)p Fj(string)p Ft([?])630 4449 y Fu(Refer)25
+b(to)h(the)f(most)h(recen)m(t)g(command)f(preceding)g(the)g(curren)m(t)
+g(p)s(osition)g(in)g(the)g(history)630 4559 y(list)32
+b(con)m(taining)i Fr(string)p Fu(.)45 b(The)31 b(trailing)i(`)p
+Ft(?)p Fu(')f(ma)m(y)g(b)s(e)f(omitted)i(if)f(the)g Fr(string)39
+b Fu(is)32 b(follo)m(w)m(ed)630 4668 y(immediately)f(b)m(y)e(a)h
+(newline.)40 b(If)29 b Fr(string)38 b Fu(is)29 b(missing,)h(the)g
+(string)f(from)g(the)h(most)g(recen)m(t)630 4778 y(searc)m(h)h(is)f
+(used;)g(it)h(is)g(an)f(error)g(if)g(there)h(is)f(no)g(previous)g
+(searc)m(h)h(string.)150 4941 y Ft(^)p Fj(string1)p Ft(^)p
+Fj(string2)p Ft(^)630 5050 y Fu(Quic)m(k)h(Substitution.)44
+b(Rep)s(eat)32 b(the)g(last)h(command,)f(replacing)g
+Fr(string1)40 b Fu(with)31 b Fr(string2)p Fu(.)630 5160
+y(Equiv)-5 b(alen)m(t)31 b(to)g Ft(!!:s^)p Fj(string1)p
+Ft(^)p Fj(string2)p Ft(^)p Fu(.)150 5322 y Ft(!#)384
+b Fu(The)30 b(en)m(tire)h(command)f(line)h(t)m(yp)s(ed)f(so)h(far.)p
+eop end
+%%Page: 150 156
+TeXDict begin 150 155 bop 150 -116 a Fu(Chapter)30 b(9:)41
+b(Using)30 b(History)h(In)m(teractiv)m(ely)1925 b(150)150
+299 y Fk(9.3.2)63 b(W)-10 b(ord)41 b(Designators)150
+446 y Fu(W)-8 b(ord)27 b(designators)h(are)g(used)e(to)i(select)h
+(desired)d(w)m(ords)h(from)f(the)i(ev)m(en)m(t.)41 b(A)27
+b(`)p Ft(:)p Fu(')g(separates)h(the)f(ev)m(en)m(t)150
+555 y(sp)s(eci\014cation)38 b(from)e(the)h(w)m(ord)f(designator.)61
+b(It)37 b(ma)m(y)h(b)s(e)e(omitted)i(if)e(the)h(w)m(ord)g(designator)g
+(b)s(egins)150 665 y(with)30 b(a)g(`)p Ft(^)p Fu(',)g(`)p
+Ft($)p Fu(',)g(`)p Ft(*)p Fu(',)h(`)p Ft(-)p Fu(',)f(or)g(`)p
+Ft(\045)p Fu('.)41 b(W)-8 b(ords)30 b(are)g(n)m(um)m(b)s(ered)e(from)i
+(the)g(b)s(eginning)f(of)h(the)g(line,)g(with)g(the)150
+775 y(\014rst)f(w)m(ord)f(b)s(eing)h(denoted)h(b)m(y)f(0)h(\(zero\).)41
+b(W)-8 b(ords)30 b(are)g(inserted)f(in)m(to)h(the)g(curren)m(t)f(line)g
+(separated)h(b)m(y)150 884 y(single)h(spaces.)275 1019
+y(F)-8 b(or)31 b(example,)150 1179 y Ft(!!)384 b Fu(designates)37
+b(the)f(preceding)g(command.)57 b(When)35 b(y)m(ou)i(t)m(yp)s(e)f
+(this,)h(the)f(preceding)g(com-)630 1289 y(mand)30 b(is)g(rep)s(eated)g
+(in)g(toto.)150 1449 y Ft(!!:$)288 b Fu(designates)23
+b(the)g(last)g(argumen)m(t)g(of)f(the)h(preceding)f(command.)38
+b(This)22 b(ma)m(y)h(b)s(e)e(shortened)630 1558 y(to)31
+b Ft(!$)p Fu(.)150 1718 y Ft(!fi:2)240 b Fu(designates)30
+b(the)g(second)f(argumen)m(t)h(of)f(the)h(most)f(recen)m(t)i(command)e
+(starting)h(with)f(the)630 1828 y(letters)j Ft(fi)p Fu(.)275
+1988 y(Here)e(are)h(the)g(w)m(ord)f(designators:)150
+2148 y Ft(0)g(\(zero\))114 b Fu(The)30 b Ft(0)p Fu(th)g(w)m(ord.)40
+b(F)-8 b(or)31 b(man)m(y)g(applications,)h(this)e(is)g(the)h(command)f
+(w)m(ord.)150 2308 y Fj(n)432 b Fu(The)30 b Fr(n)p Fu(th)g(w)m(ord.)150
+2467 y Ft(^)432 b Fu(The)30 b(\014rst)f(argumen)m(t;)j(that)f(is,)f(w)m
+(ord)g(1.)150 2627 y Ft($)432 b Fu(The)30 b(last)h(argumen)m(t.)150
+2787 y Ft(\045)432 b Fu(The)40 b(\014rst)h(w)m(ord)f(matc)m(hed)i(b)m
+(y)f(the)g(most)g(recen)m(t)h(`)p Ft(?)p Fj(string)p
+Ft(?)p Fu(')d(searc)m(h,)44 b(if)d(the)g(searc)m(h)630
+2897 y(string)30 b(b)s(egins)g(with)g(a)h(c)m(haracter)h(that)f(is)f
+(part)h(of)f(a)h(w)m(ord.)150 3057 y Fj(x)p Ft(-)p Fj(y)336
+b Fu(A)30 b(range)h(of)g(w)m(ords;)f(`)p Ft(-)p Fj(y)p
+Fu(')g(abbreviates)h(`)p Ft(0-)p Fj(y)p Fu('.)150 3216
+y Ft(*)432 b Fu(All)28 b(of)g(the)g(w)m(ords,)g(except)h(the)e
+Ft(0)p Fu(th.)40 b(This)27 b(is)g(a)h(synon)m(ym)f(for)h(`)p
+Ft(1-$)p Fu('.)39 b(It)28 b(is)g(not)g(an)f(error)630
+3326 y(to)j(use)g(`)p Ft(*)p Fu(')f(if)h(there)g(is)g(just)f(one)h(w)m
+(ord)f(in)g(the)h(ev)m(en)m(t;)i(the)d(empt)m(y)i(string)e(is)h
+(returned)e(in)630 3436 y(that)j(case.)150 3595 y Fj(x)p
+Ft(*)384 b Fu(Abbreviates)31 b(`)p Fj(x)p Ft(-$)p Fu(')150
+3755 y Fj(x)p Ft(-)384 b Fu(Abbreviates)27 b(`)p Fj(x)p
+Ft(-$)p Fu(')g(lik)m(e)h(`)p Fj(x)p Ft(*)p Fu(',)g(but)e(omits)i(the)f
+(last)h(w)m(ord.)39 b(If)27 b(`)p Ft(x)p Fu(')g(is)g(missing,)g(it)h
+(defaults)630 3865 y(to)j(0.)275 4025 y(If)i(a)h(w)m(ord)g(designator)g
+(is)g(supplied)f(without)h(an)g(ev)m(en)m(t)h(sp)s(eci\014cation,)h
+(the)e(previous)f(command)150 4135 y(is)d(used)g(as)h(the)f(ev)m(en)m
+(t.)150 4334 y Fk(9.3.3)63 b(Mo)s(di\014ers)150 4481
+y Fu(After)29 b(the)g(optional)g(w)m(ord)g(designator,)g(y)m(ou)g(can)g
+(add)f(a)h(sequence)g(of)g(one)g(or)f(more)h(of)g(the)f(follo)m(wing)
+150 4591 y(mo)s(di\014ers,)33 b(eac)m(h)h(preceded)f(b)m(y)g(a)h(`)p
+Ft(:)p Fu('.)50 b(These)33 b(mo)s(dify)-8 b(,)33 b(or)h(edit,)g(the)g
+(w)m(ord)f(or)g(w)m(ords)g(selected)h(from)150 4700 y(the)d(history)f
+(ev)m(en)m(t.)150 4860 y Ft(h)432 b Fu(Remo)m(v)m(e)32
+b(a)f(trailing)g(pathname)g(comp)s(onen)m(t,)g(lea)m(ving)h(only)e(the)
+h(head.)150 5020 y Ft(t)432 b Fu(Remo)m(v)m(e)32 b(all)f(leading)h
+(pathname)e(comp)s(onen)m(ts,)h(lea)m(ving)h(the)e(tail.)150
+5180 y Ft(r)432 b Fu(Remo)m(v)m(e)32 b(a)f(trailing)g(su\016x)f(of)g
+(the)h(form)f(`)p Ft(.)p Fj(suffix)p Fu(',)f(lea)m(ving)j(the)f
+(basename.)150 5340 y Ft(e)432 b Fu(Remo)m(v)m(e)32 b(all)f(but)f(the)h
+(trailing)g(su\016x.)p eop end
+%%Page: 151 157
+TeXDict begin 151 156 bop 150 -116 a Fu(Chapter)30 b(9:)41
+b(Using)30 b(History)h(In)m(teractiv)m(ely)1925 b(151)150
+299 y Ft(p)432 b Fu(Prin)m(t)30 b(the)h(new)f(command)g(but)g(do)g(not)
+g(execute)i(it.)150 458 y Ft(q)432 b Fu(Quote)31 b(the)f(substituted)g
+(w)m(ords,)g(escaping)h(further)e(substitutions.)150
+618 y Ft(x)432 b Fu(Quote)32 b(the)f(substituted)g(w)m(ords)f(as)i
+(with)f(`)p Ft(q)p Fu(',)h(but)e(break)h(in)m(to)i(w)m(ords)d(at)i
+(spaces,)h(tabs,)630 727 y(and)38 b(newlines.)66 b(The)39
+b(`)p Ft(q)p Fu(')g(and)f(`)p Ft(x)p Fu(')h(mo)s(di\014ers)f(are)h(m)m
+(utually)g(exclusiv)m(e;)45 b(the)39 b(last)h(one)630
+837 y(supplied)29 b(is)i(used.)150 996 y Ft(s/)p Fj(old)p
+Ft(/)p Fj(new)p Ft(/)630 1106 y Fu(Substitute)g Fr(new)39
+b Fu(for)32 b(the)g(\014rst)f(o)s(ccurrence)h(of)f Fr(old)36
+b Fu(in)31 b(the)h(ev)m(en)m(t)h(line.)46 b(An)m(y)31
+b(c)m(haracter)630 1215 y(ma)m(y)k(b)s(e)e(used)h(as)g(the)h(delimiter)
+g(in)f(place)h(of)f(`)p Ft(/)p Fu('.)53 b(The)33 b(delimiter)i(ma)m(y)g
+(b)s(e)f(quoted)g(in)630 1325 y Fr(old)40 b Fu(and)c
+Fr(new)44 b Fu(with)36 b(a)h(single)g(bac)m(kslash.)60
+b(If)36 b(`)p Ft(&)p Fu(')h(app)s(ears)e(in)i Fr(new)p
+Fu(,)g(it)h(is)e(replaced)h(b)m(y)630 1435 y Fr(old)p
+Fu(.)k(A)31 b(single)g(bac)m(kslash)g(will)g(quote)g(the)g(`)p
+Ft(&)p Fu('.)41 b(If)31 b Fr(old)j Fu(is)c(n)m(ull,)h(it)g(is)g(set)g
+(to)g(the)g(last)g Fr(old)630 1544 y Fu(substituted,)j(or,)g(if)f(no)g
+(previous)g(history)g(substitutions)g(to)s(ok)h(place,)h(the)e(last)h
+Fr(string)630 1654 y Fu(in)j(a)g(!?)p Fr(string)8 b Ft([?])37
+b Fu(searc)m(h.)61 b(If)37 b Fr(new)45 b Fu(is)37 b(is)g(n)m(ull,)i
+(eac)m(h)f(matc)m(hing)h Fr(old)h Fu(is)e(deleted.)61
+b(The)630 1763 y(\014nal)30 b(delimiter)h(is)g(optional)g(if)f(it)h(is)
+g(the)f(last)i(c)m(haracter)f(on)g(the)f(input)g(line.)150
+1923 y Ft(&)432 b Fu(Rep)s(eat)31 b(the)f(previous)g(substitution.)150
+2082 y Ft(g)150 2192 y(a)432 b Fu(Cause)38 b(c)m(hanges)i(to)f(b)s(e)f
+(applied)h(o)m(v)m(er)h(the)f(en)m(tire)g(ev)m(en)m(t)h(line.)66
+b(Used)39 b(in)f(conjunction)630 2301 y(with)30 b(`)p
+Ft(s)p Fu(',)h(as)f(in)h Ft(gs/)p Fj(old)p Ft(/)p Fj(new)p
+Ft(/)p Fu(,)c(or)j(with)h(`)p Ft(&)p Fu('.)150 2461 y
+Ft(G)432 b Fu(Apply)30 b(the)g(follo)m(wing)i(`)p Ft(s)p
+Fu(')f(or)f(`)p Ft(&)p Fu(')h(mo)s(di\014er)e(once)i(to)g(eac)m(h)h(w)m
+(ord)e(in)g(the)g(ev)m(en)m(t.)p eop end
+%%Page: 152 158
+TeXDict begin 152 157 bop 3614 -116 a Fu(152)150 299
+y Fp(10)80 b(Installing)52 b(Bash)150 534 y Fu(This)31
+b(c)m(hapter)h(pro)m(vides)g(basic)g(instructions)f(for)g(installing)i
+(Bash)f(on)f(the)h(v)-5 b(arious)31 b(supp)s(orted)f(plat-)150
+643 y(forms.)40 b(The)28 b(distribution)h(supp)s(orts)e(the)j
+Fm(gnu)f Fu(op)s(erating)h(systems,)f(nearly)h(ev)m(ery)g(v)m(ersion)f
+(of)h(Unix,)150 753 y(and)d(sev)m(eral)j(non-Unix)d(systems)h(suc)m(h)g
+(as)g(BeOS)g(and)f(In)m(terix.)40 b(Other)28 b(indep)s(enden)m(t)e(p)s
+(orts)h(exist)i(for)150 862 y Fm(ms-dos)p Fu(,)h Fm(os/2)p
+Fu(,)g(and)g(Windo)m(ws)g(platforms.)150 1103 y Fs(10.1)68
+b(Basic)45 b(Installation)150 1263 y Fu(These)30 b(are)h(installation)h
+(instructions)e(for)h(Bash.)275 1398 y(The)e(simplest)i(w)m(a)m(y)g(to)
+g(compile)h(Bash)e(is:)199 1532 y(1.)61 b Ft(cd)38 b
+Fu(to)h(the)f(directory)h(con)m(taining)h(the)f(source)f(co)s(de)h(and)
+f(t)m(yp)s(e)g(`)p Ft(./configure)p Fu(')e(to)j(con\014gure)330
+1642 y(Bash)c(for)f(y)m(our)h(system.)54 b(If)34 b(y)m(ou're)h(using)f
+Ft(csh)g Fu(on)g(an)h(old)g(v)m(ersion)g(of)g(System)f(V,)h(y)m(ou)g
+(migh)m(t)330 1751 y(need)21 b(to)g(t)m(yp)s(e)g(`)p
+Ft(sh)30 b(./configure)p Fu(')18 b(instead)j(to)g(prev)m(en)m(t)h
+Ft(csh)e Fu(from)g(trying)h(to)g(execute)h Ft(configure)330
+1861 y Fu(itself.)330 1996 y(Running)30 b Ft(configure)f
+Fu(tak)m(es)k(some)e(time.)45 b(While)32 b(running,)e(it)i(prin)m(ts)f
+(messages)h(telling)h(whic)m(h)330 2105 y(features)e(it)g(is)f(c)m(hec)
+m(king)i(for.)199 2240 y(2.)61 b(T)m(yp)s(e)30 b(`)p
+Ft(make)p Fu(')g(to)h(compile)g(Bash)g(and)e(build)h(the)g
+Ft(bashbug)f Fu(bug)g(rep)s(orting)h(script.)199 2374
+y(3.)61 b(Optionally)-8 b(,)32 b(t)m(yp)s(e)e(`)p Ft(make)g(tests)p
+Fu(')f(to)i(run)e(the)h(Bash)h(test)g(suite.)199 2509
+y(4.)61 b(T)m(yp)s(e)36 b(`)p Ft(make)29 b(install)p
+Fu(')35 b(to)i(install)h Ft(bash)d Fu(and)h Ft(bashbug)p
+Fu(.)57 b(This)35 b(will)i(also)h(install)f(the)g(man)m(ual)330
+2619 y(pages)31 b(and)f(Info)g(\014le.)275 2778 y(The)20
+b Ft(configure)f Fu(shell)i(script)g(attempts)h(to)g(guess)f(correct)i
+(v)-5 b(alues)21 b(for)g(v)-5 b(arious)21 b(system-dep)s(enden)m(t)150
+2888 y(v)-5 b(ariables)31 b(used)e(during)g(compilation.)42
+b(It)31 b(uses)e(those)i(v)-5 b(alues)30 b(to)h(create)h(a)e
+Ft(Makefile)e Fu(in)i(eac)m(h)i(direc-)150 2998 y(tory)k(of)g(the)g
+(pac)m(k)-5 b(age)38 b(\(the)e(top)g(directory)-8 b(,)38
+b(the)e Ft(builtins)p Fu(,)f Ft(doc)p Fu(,)i(and)e Ft(support)e
+Fu(directories,)39 b(eac)m(h)150 3107 y(directory)29
+b(under)d Ft(lib)p Fu(,)j(and)e(sev)m(eral)j(others\).)40
+b(It)29 b(also)g(creates)h(a)e Ft(config.h)e Fu(\014le)j(con)m(taining)
+g(system-)150 3217 y(dep)s(enden)m(t)e(de\014nitions.)40
+b(Finally)-8 b(,)31 b(it)d(creates)i(a)f(shell)g(script)f(named)g
+Ft(config.status)d Fu(that)k(y)m(ou)g(can)150 3326 y(run)h(in)h(the)h
+(future)f(to)h(recreate)h(the)f(curren)m(t)f(con\014guration,)i(a)f
+(\014le)f Ft(config.cache)e Fu(that)j(sa)m(v)m(es)h(the)150
+3436 y(results)39 b(of)g(its)h(tests)g(to)g(sp)s(eed)e(up)g
+(recon\014guring,)j(and)e(a)g(\014le)g Ft(config.log)e
+Fu(con)m(taining)j(compiler)150 3545 y(output)30 b(\(useful)h(mainly)g
+(for)f(debugging)h Ft(configure)p Fu(\).)40 b(If)30 b(at)h(some)h(p)s
+(oin)m(t)e Ft(config.cache)e Fu(con)m(tains)150 3655
+y(results)i(y)m(ou)h(don't)f(w)m(an)m(t)h(to)h(k)m(eep,)f(y)m(ou)g(ma)m
+(y)g(remo)m(v)m(e)g(or)g(edit)g(it.)275 3790 y(T)-8 b(o)37
+b(\014nd)f(out)i(more)f(ab)s(out)h(the)f(options)h(and)f(argumen)m(ts)g
+(that)h(the)g Ft(configure)d Fu(script)i(under-)150 3899
+y(stands,)30 b(t)m(yp)s(e)390 4034 y Ft(bash-4.2$)45
+b(./configure)g(--help)150 4169 y Fu(at)31 b(the)g(Bash)f(prompt)g(in)g
+(y)m(our)g(Bash)h(source)f(directory)-8 b(.)275 4303
+y(If)34 b(y)m(ou)h(w)m(an)m(t)g(to)g(build)f(Bash)g(in)h(a)g(directory)
+g(separate)g(from)f(the)h(source)g(directory)g({)g(to)g(build)150
+4413 y(for)30 b(m)m(ultiple)i(arc)m(hitectures,)g(for)e(example)h({)g
+(just)f(use)h(the)f(full)h(path)f(to)h(the)g(con\014gure)f(script.)41
+b(The)150 4523 y(follo)m(wing)24 b(commands)f(will)g(build)f(bash)g(in)
+g(a)h(directory)h(under)d Ft(/usr/local/build)d Fu(from)23
+b(the)g(source)150 4632 y(co)s(de)31 b(in)f Ft(/usr/local/src/bash-4.4)
+o Fu(:)390 4767 y Ft(mkdir)46 b(/usr/local/build/bash-4.4)390
+4877 y(cd)h(/usr/local/build/bash-4.4)390 4986 y(bash)g
+(/usr/local/src/bash-4.4)o(/con)o(fig)o(ure)390 5096
+y(make)275 5230 y Fu(See)27 b(Section)h(10.3)g([Compiling)g(F)-8
+b(or)27 b(Multiple)h(Arc)m(hitectures],)i(page)d(153,)j(for)c(more)i
+(information)150 5340 y(ab)s(out)i(building)g(in)g(a)g(directory)h
+(separate)h(from)e(the)g(source.)p eop end
+%%Page: 153 159
+TeXDict begin 153 158 bop 150 -116 a Fu(Chapter)30 b(10:)41
+b(Installing)31 b(Bash)2356 b(153)275 299 y(If)53 b(y)m(ou)h(need)f(to)
+i(do)e(un)m(usual)g(things)g(to)i(compile)g(Bash,)k(please)c(try)e(to)i
+(\014gure)e(out)h(ho)m(w)150 408 y Ft(configure)47 b
+Fu(could)j(c)m(hec)m(k)h(whether)e(or)g(not)h(to)h(do)e(them,)55
+b(and)49 b(mail)h(di\013s)f(or)h(instructions)f(to)150
+518 y Ft(bash-maintainers@gnu.org)24 b Fu(so)30 b(they)h(can)g(b)s(e)e
+(considered)i(for)f(the)g(next)h(release.)275 658 y(The)e(\014le)g
+Ft(configure.ac)d Fu(is)k(used)e(to)j(create)g Ft(configure)c
+Fu(b)m(y)i(a)h(program)f(called)i(Auto)s(conf.)40 b(Y)-8
+b(ou)150 768 y(only)34 b(need)g Ft(configure.ac)d Fu(if)i(y)m(ou)i(w)m
+(an)m(t)g(to)f(c)m(hange)i(it)e(or)g(regenerate)i Ft(configure)31
+b Fu(using)j(a)g(new)m(er)150 878 y(v)m(ersion)25 b(of)f(Auto)s(conf.)
+39 b(If)24 b(y)m(ou)h(do)f(this,)i(mak)m(e)f(sure)f(y)m(ou)h(are)f
+(using)g(Auto)s(conf)h(v)m(ersion)f(2.50)i(or)f(new)m(er.)275
+1018 y(Y)-8 b(ou)29 b(can)f(remo)m(v)m(e)i(the)f(program)g(binaries)f
+(and)g(ob)5 b(ject)29 b(\014les)g(from)f(the)h(source)f(co)s(de)h
+(directory)g(b)m(y)150 1127 y(t)m(yping)j(`)p Ft(make)d(clean)p
+Fu('.)42 b(T)-8 b(o)32 b(also)g(remo)m(v)m(e)g(the)g(\014les)f(that)g
+Ft(configure)e Fu(created)j(\(so)g(y)m(ou)g(can)f(compile)150
+1237 y(Bash)g(for)f(a)g(di\013eren)m(t)h(kind)f(of)g(computer\),)h(t)m
+(yp)s(e)g(`)p Ft(make)e(distclean)p Fu('.)150 1487 y
+Fs(10.2)68 b(Compilers)46 b(and)f(Options)150 1646 y
+Fu(Some)28 b(systems)h(require)f(un)m(usual)f(options)i(for)f
+(compilation)i(or)f(linking)f(that)h(the)g Ft(configure)d
+Fu(script)150 1756 y(do)s(es)32 b(not)g(kno)m(w)g(ab)s(out.)44
+b(Y)-8 b(ou)33 b(can)f(giv)m(e)h Ft(configure)d Fu(initial)j(v)-5
+b(alues)32 b(for)g(v)-5 b(ariables)32 b(b)m(y)g(setting)h(them)150
+1865 y(in)k(the)g(en)m(vironmen)m(t.)62 b(Using)38 b(a)f
+(Bourne-compatible)i(shell,)g(y)m(ou)f(can)g(do)f(that)h(on)f(the)g
+(command)150 1975 y(line)31 b(lik)m(e)g(this:)390 2115
+y Ft(CC=c89)46 b(CFLAGS=-O2)f(LIBS=-lposix)g(./configure)275
+2255 y Fu(On)29 b(systems)h(that)h(ha)m(v)m(e)h(the)f
+Ft(env)e Fu(program,)h(y)m(ou)h(can)g(do)f(it)h(lik)m(e)h(this:)390
+2396 y Ft(env)47 b(CPPFLAGS=-I/usr/local/in)o(clud)o(e)42
+b(LDFLAGS=-s)j(./configure)275 2536 y Fu(The)29 b(con\014guration)i
+(pro)s(cess)f(uses)g(GCC)g(to)h(build)e(Bash)i(if)f(it)h(is)g(a)m(v)-5
+b(ailable.)150 2786 y Fs(10.3)68 b(Compiling)46 b(F)-11
+b(or)45 b(Multiple)g(Arc)l(hitectures)150 2945 y Fu(Y)-8
+b(ou)27 b(can)g(compile)g(Bash)g(for)f(more)h(than)f(one)h(kind)f(of)g
+(computer)h(at)g(the)g(same)g(time,)h(b)m(y)e(placing)i(the)150
+3055 y(ob)5 b(ject)31 b(\014les)f(for)g(eac)m(h)i(arc)m(hitecture)f(in)
+f(their)g(o)m(wn)h(directory)-8 b(.)41 b(T)-8 b(o)31
+b(do)f(this,)g(y)m(ou)h(m)m(ust)f(use)g(a)g(v)m(ersion)150
+3164 y(of)36 b Ft(make)e Fu(that)i(supp)s(orts)e(the)i
+Ft(VPATH)e Fu(v)-5 b(ariable,)38 b(suc)m(h)d(as)h(GNU)g
+Ft(make)p Fu(.)55 b Ft(cd)35 b Fu(to)i(the)e(directory)h(where)150
+3274 y(y)m(ou)k(w)m(an)m(t)h(the)g(ob)5 b(ject)41 b(\014les)f(and)f
+(executables)j(to)e(go)h(and)f(run)e(the)j Ft(configure)c
+Fu(script)j(from)g(the)150 3383 y(source)32 b(directory)h(\(see)g
+(Section)f(10.1)i([Basic)f(Installation],)i(page)e(152\).)47
+b(Y)-8 b(ou)32 b(ma)m(y)h(need)f(to)g(supply)150 3493
+y(the)43 b Ft(--srcdir=PATH)c Fu(argumen)m(t)k(to)h(tell)g
+Ft(configure)c Fu(where)i(the)h(source)g(\014les)g(are.)78
+b Ft(configure)150 3603 y Fu(automatically)33 b(c)m(hec)m(ks)f(for)e
+(the)h(source)f(co)s(de)h(in)f(the)h(directory)f(that)h
+Ft(configure)d Fu(is)j(in)f(and)f(in)h(`..'.)275 3743
+y(If)20 b(y)m(ou)h(ha)m(v)m(e)i(to)e(use)g(a)g Ft(make)f
+Fu(that)i(do)s(es)e(not)i(supp)s(orts)d(the)i Ft(VPATH)e
+Fu(v)-5 b(ariable,)24 b(y)m(ou)e(can)f(compile)h(Bash)150
+3853 y(for)33 b(one)h(arc)m(hitecture)h(at)f(a)g(time)g(in)f(the)h
+(source)g(co)s(de)f(directory)-8 b(.)51 b(After)34 b(y)m(ou)g(ha)m(v)m
+(e)h(installed)f(Bash)150 3962 y(for)c(one)h(arc)m(hitecture,)h(use)e
+(`)p Ft(make)g(distclean)p Fu(')e(b)s(efore)i(recon\014guring)g(for)g
+(another)g(arc)m(hitecture.)275 4102 y(Alternativ)m(ely)-8
+b(,)30 b(if)c(y)m(our)g(system)h(supp)s(orts)d(sym)m(b)s(olic)j(links,)
+g(y)m(ou)g(can)g(use)f(the)g Ft(support/mkclone)150 4212
+y Fu(script)d(to)h(create)g(a)f(build)f(tree)i(whic)m(h)f(has)f(sym)m
+(b)s(olic)i(links)e(bac)m(k)i(to)g(eac)m(h)g(\014le)f(in)g(the)g
+(source)g(directory)-8 b(.)150 4322 y(Here's)41 b(an)f(example)i(that)f
+(creates)h(a)e(build)g(directory)h(in)f(the)h(curren)m(t)f(directory)h
+(from)f(a)h(source)150 4431 y(directory)31 b Ft(/usr/gnu/src/bash-2.0)p
+Fu(:)390 4572 y Ft(bash)47 b(/usr/gnu/src/bash-2.0/s)o(uppo)o(rt/)o
+(mkcl)o(one)41 b(-s)47 b(/usr/gnu/src/bash-2.0)42 b(.)150
+4712 y Fu(The)c Ft(mkclone)e Fu(script)i(requires)g(Bash,)i(so)f(y)m
+(ou)f(m)m(ust)h(ha)m(v)m(e)g(already)g(built)f(Bash)g(for)g(at)h(least)
+h(one)150 4821 y(arc)m(hitecture)32 b(b)s(efore)e(y)m(ou)h(can)f
+(create)i(build)e(directories)h(for)f(other)h(arc)m(hitectures.)150
+5071 y Fs(10.4)68 b(Installation)47 b(Names)150 5230
+y Fu(By)37 b(default,)i(`)p Ft(make)29 b(install)p Fu(')35
+b(will)j(install)f(in)m(to)h Ft(/usr/local/bin)p Fu(,)d
+Ft(/usr/local/man)p Fu(,)f(etc.)61 b(Y)-8 b(ou)150 5340
+y(can)35 b(sp)s(ecify)f(an)h(installation)i(pre\014x)c(other)j(than)e
+Ft(/usr/local)e Fu(b)m(y)j(giving)g Ft(configure)e Fu(the)h(option)p
+eop end
+%%Page: 154 160
+TeXDict begin 154 159 bop 150 -116 a Fu(Chapter)30 b(10:)41
+b(Installing)31 b(Bash)2356 b(154)150 299 y Ft(--prefix=)p
+Fj(PATH)p Fu(,)41 b(or)g(b)m(y)g(sp)s(ecifying)h(a)f(v)-5
+b(alue)42 b(for)f(the)h Ft(DESTDIR)d Fu(`)p Ft(make)p
+Fu(')i(v)-5 b(ariable)42 b(when)f(running)150 408 y(`)p
+Ft(make)29 b(install)p Fu('.)275 566 y(Y)-8 b(ou)71 b(can)h(sp)s(ecify)
+f(separate)h(installation)h(pre\014xes)d(for)h(arc)m(hitecture-sp)s
+(eci\014c)i(\014les)f(and)150 676 y(arc)m(hitecture-indep)s(enden)m(t)
+44 b(\014les.)80 b(If)43 b(y)m(ou)h(giv)m(e)h Ft(configure)c
+Fu(the)j(option)g Ft(--exec-prefix=)p Fj(PATH)p Fu(,)150
+785 y(`)p Ft(make)29 b(install)p Fu(')63 b(will)h(use)f
+Fr(P)-8 b(A)g(TH)75 b Fu(as)64 b(the)g(pre\014x)e(for)i(installing)h
+(programs)e(and)h(libraries.)150 895 y(Do)s(cumen)m(tation)32
+b(and)e(other)h(data)g(\014les)f(will)h(still)g(use)f(the)h(regular)f
+(pre\014x.)150 1171 y Fs(10.5)68 b(Sp)t(ecifying)45 b(the)g(System)h(T)
+l(yp)t(e)150 1330 y Fu(There)f(ma)m(y)g(b)s(e)f(some)i(features)f
+Ft(configure)e Fu(can)i(not)g(\014gure)g(out)g(automatically)-8
+b(,)52 b(but)44 b(need)h(to)150 1440 y(determine)26 b(b)m(y)g(the)g(t)m
+(yp)s(e)g(of)g(host)g(Bash)g(will)g(run)f(on.)39 b(Usually)26
+b Ft(configure)d Fu(can)k(\014gure)e(that)h(out,)i(but)150
+1549 y(if)g(it)g(prin)m(ts)f(a)h(message)g(sa)m(ying)h(it)f(can)g(not)f
+(guess)h(the)g(host)f(t)m(yp)s(e,)i(giv)m(e)g(it)f(the)g
+Ft(--host=TYPE)c Fu(option.)150 1659 y(`)p Ft(TYPE)p
+Fu(')29 b(can)h(either)g(b)s(e)g(a)g(short)f(name)h(for)f(the)h(system)
+g(t)m(yp)s(e,)h(suc)m(h)e(as)h(`)p Ft(sun4)p Fu(',)g(or)f(a)h
+(canonical)i(name)150 1768 y(with)e(three)h(\014elds:)40
+b(`)p Ft(CPU-COMPANY-SYSTEM)p Fu(')26 b(\(e.g.,)32 b(`)p
+Ft(i386-unknown-freebsd4.2)p Fu('\).)275 1926 y(See)e(the)h(\014le)f
+Ft(support/config.sub)c Fu(for)k(the)g(p)s(ossible)g(v)-5
+b(alues)31 b(of)f(eac)m(h)i(\014eld.)150 2202 y Fs(10.6)68
+b(Sharing)45 b(Defaults)150 2361 y Fu(If)d(y)m(ou)i(w)m(an)m(t)g(to)f
+(set)h(default)f(v)-5 b(alues)43 b(for)g Ft(configure)d
+Fu(scripts)j(to)h(share,)i(y)m(ou)d(can)g(create)i(a)e(site)150
+2471 y(shell)48 b(script)f(called)i Ft(config.site)44
+b Fu(that)k(giv)m(es)h(default)f(v)-5 b(alues)48 b(for)f(v)-5
+b(ariables)48 b(lik)m(e)h Ft(CC)p Fu(,)j Ft(cache_)150
+2580 y(file)p Fu(,)c(and)d Ft(prefix)p Fu(.)85 b Ft(configure)43
+b Fu(lo)s(oks)j(for)f Ft(PREFIX/share/config.site)39
+b Fu(if)46 b(it)g(exists,)k(then)150 2690 y Ft(PREFIX/etc/config.site)
+24 b Fu(if)31 b(it)g(exists.)42 b(Or,)30 b(y)m(ou)h(can)g(set)g(the)g
+Ft(CONFIG_SITE)c Fu(en)m(vironmen)m(t)k(v)-5 b(ari-)150
+2800 y(able)40 b(to)g(the)g(lo)s(cation)h(of)e(the)h(site)g(script.)67
+b(A)40 b(w)m(arning:)58 b(the)40 b(Bash)g Ft(configure)c
+Fu(lo)s(oks)k(for)f(a)h(site)150 2909 y(script,)31 b(but)e(not)i(all)g
+Ft(configure)d Fu(scripts)i(do.)150 3185 y Fs(10.7)68
+b(Op)t(eration)46 b(Con)l(trols)150 3344 y Ft(configure)28
+b Fu(recognizes)k(the)e(follo)m(wing)i(options)f(to)g(con)m(trol)h(ho)m
+(w)e(it)h(op)s(erates.)150 3538 y Ft(--cache-file=)p
+Fj(file)630 3648 y Fu(Use)d(and)g(sa)m(v)m(e)h(the)f(results)g(of)g
+(the)h(tests)f(in)g Fr(\014le)33 b Fu(instead)28 b(of)h
+Ft(./config.cache)p Fu(.)36 b(Set)28 b Fr(\014le)630
+3758 y Fu(to)j Ft(/dev/null)d Fu(to)j(disable)g(cac)m(hing,)h(for)e
+(debugging)g Ft(configure)p Fu(.)150 3940 y Ft(--help)192
+b Fu(Prin)m(t)30 b(a)h(summary)e(of)i(the)f(options)h(to)g
+Ft(configure)p Fu(,)d(and)i(exit.)150 4123 y Ft(--quiet)150
+4232 y(--silent)150 4342 y(-q)384 b Fu(Do)31 b(not)g(prin)m(t)f
+(messages)h(sa)m(ying)g(whic)m(h)g(c)m(hec)m(ks)g(are)g(b)s(eing)f
+(made.)150 4525 y Ft(--srcdir=)p Fj(dir)630 4634 y Fu(Lo)s(ok)i(for)g
+(the)g(Bash)g(source)h(co)s(de)f(in)g(directory)g Fr(dir)p
+Fu(.)45 b(Usually)33 b Ft(configure)c Fu(can)j(deter-)630
+4744 y(mine)e(that)h(directory)g(automatically)-8 b(.)150
+4927 y Ft(--version)630 5036 y Fu(Prin)m(t)29 b(the)h(v)m(ersion)g(of)g
+(Auto)s(conf)f(used)g(to)h(generate)h(the)f Ft(configure)d
+Fu(script,)j(and)f(exit.)275 5230 y Ft(configure)34 b
+Fu(also)k(accepts)g(some)g(other,)h(not)e(widely)g(used,)h(b)s
+(oilerplate)g(options.)61 b(`)p Ft(configure)150 5340
+y(--help)p Fu(')29 b(prin)m(ts)h(the)g(complete)i(list.)p
+eop end
+%%Page: 155 161
+TeXDict begin 155 160 bop 150 -116 a Fu(Chapter)30 b(10:)41
+b(Installing)31 b(Bash)2356 b(155)150 299 y Fs(10.8)68
+b(Optional)46 b(F)-11 b(eatures)150 458 y Fu(The)29 b(Bash)h
+Ft(configure)d Fu(has)j(a)g(n)m(um)m(b)s(er)f(of)h Ft(--enable-)p
+Fj(feature)25 b Fu(options,)30 b(where)g Fr(feature)35
+b Fu(indicates)150 568 y(an)e(optional)i(part)e(of)h(Bash.)50
+b(There)33 b(are)g(also)i(sev)m(eral)g Ft(--with-)p Fj(package)29
+b Fu(options,)35 b(where)e Fr(pac)m(k)-5 b(age)150 677
+y Fu(is)32 b(something)h(lik)m(e)h(`)p Ft(bash-malloc)p
+Fu(')c(or)i(`)p Ft(purify)p Fu('.)45 b(T)-8 b(o)33 b(turn)e(o\013)i
+(the)f(default)h(use)f(of)g(a)h(pac)m(k)-5 b(age,)35
+b(use)150 787 y Ft(--without-)p Fj(package)p Fu(.)46
+b(T)-8 b(o)34 b(con\014gure)g(Bash)g(without)f(a)i(feature)f(that)g(is)
+g(enabled)g(b)m(y)f(default,)i(use)150 897 y Ft(--disable-)p
+Fj(feature)p Fu(.)275 1033 y(Here)28 b(is)g(a)h(complete)g(list)g(of)f
+(the)h Ft(--enable-)c Fu(and)j Ft(--with-)e Fu(options)i(that)h(the)f
+(Bash)g Ft(configure)150 1143 y Fu(recognizes.)150 1306
+y Ft(--with-afs)630 1415 y Fu(De\014ne)j(if)f(y)m(ou)h(are)f(using)g
+(the)h(Andrew)e(File)j(System)e(from)g(T)-8 b(ransarc.)150
+1577 y Ft(--with-bash-malloc)630 1686 y Fu(Use)34 b(the)g(Bash)h(v)m
+(ersion)f(of)g Ft(malloc)e Fu(in)i(the)g(directory)h
+Ft(lib/malloc)p Fu(.)48 b(This)34 b(is)g(not)g(the)630
+1796 y(same)e Ft(malloc)e Fu(that)j(app)s(ears)e(in)g
+Fm(gnu)h Fu(lib)s(c,)g(but)f(an)h(older)f(v)m(ersion)i(originally)g
+(deriv)m(ed)630 1905 y(from)f(the)h(4.2)g Fm(bsd)f Ft(malloc)p
+Fu(.)45 b(This)31 b Ft(malloc)g Fu(is)i(v)m(ery)f(fast,)i(but)e(w)m
+(astes)h(some)g(space)g(on)630 2015 y(eac)m(h)j(allo)s(cation.)58
+b(This)34 b(option)i(is)f(enabled)g(b)m(y)g(default.)56
+b(The)34 b Ft(NOTES)g Fu(\014le)h(con)m(tains)i(a)630
+2125 y(list)29 b(of)f(systems)f(for)h(whic)m(h)g(this)g(should)e(b)s(e)
+i(turned)e(o\013,)j(and)f Ft(configure)d Fu(disables)j(this)630
+2234 y(option)j(automatically)i(for)d(a)h(n)m(um)m(b)s(er)e(of)i
+(systems.)150 2396 y Ft(--with-curses)630 2505 y Fu(Use)h(the)h(curses)
+e(library)h(instead)g(of)h(the)f(termcap)g(library)-8
+b(.)46 b(This)32 b(should)f(b)s(e)g(supplied)630 2615
+y(if)f(y)m(our)h(system)f(has)g(an)h(inadequate)g(or)f(incomplete)i
+(termcap)e(database.)150 2777 y Ft(--with-gnu-malloc)630
+2886 y Fu(A)g(synon)m(ym)g(for)g Ft(--with-bash-malloc)p
+Fu(.)150 3048 y Ft(--with-installed-readlin)o(e[=)p Fj(P)o(REFI)o(X)p
+Ft(])630 3157 y Fu(De\014ne)c(this)f(to)h(mak)m(e)h(Bash)f(link)f(with)
+g(a)h(lo)s(cally-installed)i(v)m(ersion)e(of)g(Readline)g(rather)630
+3267 y(than)f(the)h(v)m(ersion)g(in)f Ft(lib/readline)p
+Fu(.)36 b(This)25 b(w)m(orks)g(only)h(with)f(Readline)h(5.0)h(and)e
+(later)630 3376 y(v)m(ersions.)46 b(If)32 b Fr(PREFIX)41
+b Fu(is)32 b Ft(yes)f Fu(or)i(not)f(supplied,)f Ft(configure)f
+Fu(uses)i(the)g(v)-5 b(alues)32 b(of)h(the)630 3486 y(mak)m(e)28
+b(v)-5 b(ariables)29 b Ft(includedir)24 b Fu(and)j Ft(libdir)p
+Fu(,)g(whic)m(h)g(are)h(sub)s(directories)f(of)g Ft(prefix)f
+Fu(b)m(y)630 3596 y(default,)44 b(to)d(\014nd)f(the)h(installed)g(v)m
+(ersion)h(of)f(Readline)g(if)g(it)g(is)g(not)g(in)g(the)g(standard)630
+3705 y(system)35 b(include)f(and)g(library)g(directories.)54
+b(If)34 b Fr(PREFIX)43 b Fu(is)35 b Ft(no)p Fu(,)g(Bash)f(links)h(with)
+f(the)630 3815 y(v)m(ersion)42 b(in)e Ft(lib/readline)p
+Fu(.)70 b(If)40 b Fr(PREFIX)51 b Fu(is)41 b(set)g(to)h(an)m(y)g(other)f
+(v)-5 b(alue,)44 b Ft(configure)630 3924 y Fu(treats)27
+b(it)g(as)f(a)h(directory)g(pathname)f(and)f(lo)s(oks)i(for)f(the)g
+(installed)h(v)m(ersion)g(of)f(Readline)630 4034 y(in)34
+b(sub)s(directories)f(of)h(that)h(directory)g(\(include)f(\014les)g(in)
+g Fr(PREFIX)9 b Fu(/)p Ft(include)32 b Fu(and)i(the)630
+4144 y(library)c(in)g Fr(PREFIX)9 b Fu(/)p Ft(lib)p Fu(\).)150
+4305 y Ft(--with-purify)630 4415 y Fu(De\014ne)23 b(this)g(to)h(use)f
+(the)g(Purify)f(memory)h(allo)s(cation)i(c)m(hec)m(k)m(er)g(from)e
+(Rational)i(Soft)m(w)m(are.)150 4576 y Ft(--enable-minimal-config)630
+4686 y Fu(This)e(pro)s(duces)f(a)i(shell)g(with)f(minimal)h(features,)h
+(close)g(to)f(the)g(historical)h(Bourne)e(shell.)275
+4849 y(There)k(are)i(sev)m(eral)g Ft(--enable-)d Fu(options)i(that)h
+(alter)g(ho)m(w)f(Bash)g(is)g(compiled)h(and)e(link)m(ed,)i(rather)150
+4958 y(than)h(c)m(hanging)h(run-time)f(features.)150
+5121 y Ft(--enable-largefile)630 5230 y Fu(Enable)36
+b(supp)s(ort)f(for)g(large)j(\014les)e(\()p Ft(http:)5
+b(/)g(/)g(www)g(.)g(unix)g(.)g(org)t(/)g(v)o(ersi)o(on2)t(/)g(w)o(hats)
+o(new)t(/)630 5340 y(lfs20mar)h(.)g(html)p Fu(\))35 b(if)j(the)g(op)s
+(erating)g(system)g(requires)f(sp)s(ecial)i(compiler)f(options)g(to)p
+eop end
+%%Page: 156 162
+TeXDict begin 156 161 bop 150 -116 a Fu(Chapter)30 b(10:)41
+b(Installing)31 b(Bash)2356 b(156)630 299 y(build)33
+b(programs)g(whic)m(h)h(can)g(access)h(large)g(\014les.)51
+b(This)33 b(is)h(enabled)g(b)m(y)g(default,)h(if)f(the)630
+408 y(op)s(erating)d(system)f(pro)m(vides)h(large)g(\014le)g(supp)s
+(ort.)150 570 y Ft(--enable-profiling)630 680 y Fu(This)g(builds)f(a)i
+(Bash)g(binary)f(that)h(pro)s(duces)e(pro\014ling)h(information)h(to)h
+(b)s(e)d(pro)s(cessed)630 790 y(b)m(y)g Ft(gprof)f Fu(eac)m(h)j(time)f
+(it)g(is)f(executed.)150 951 y Ft(--enable-static-link)630
+1061 y Fu(This)37 b(causes)h(Bash)f(to)h(b)s(e)f(link)m(ed)h
+(statically)-8 b(,)43 b(if)37 b Ft(gcc)g Fu(is)g(b)s(eing)g(used.)61
+b(This)37 b(could)h(b)s(e)630 1171 y(used)30 b(to)h(build)e(a)i(v)m
+(ersion)g(to)g(use)f(as)g(ro)s(ot's)h(shell.)275 1334
+y(The)f(`)p Ft(minimal-config)p Fu(')d(option)k(can)g(b)s(e)f(used)f
+(to)j(disable)e(all)i(of)f(the)f(follo)m(wing)i(options,)g(but)d(it)150
+1443 y(is)h(pro)s(cessed)g(\014rst,)g(so)h(individual)f(options)g(ma)m
+(y)h(b)s(e)f(enabled)g(using)g(`)p Ft(enable-)p Fj(feature)p
+Fu('.)275 1580 y(All)c(of)f(the)h(follo)m(wing)h(options)f(except)g
+(for)g(`)p Ft(disabled-builtins)p Fu(',)c(`)p Ft(direxpand-default)p
+Fu(',)h(and)150 1690 y(`)p Ft(xpg-echo-default)p Fu(')28
+b(are)33 b(enabled)f(b)m(y)g(default,)h(unless)e(the)i(op)s(erating)f
+(system)h(do)s(es)e(not)i(pro)m(vide)150 1800 y(the)e(necessary)f(supp)
+s(ort.)150 1963 y Ft(--enable-alias)630 2072 y Fu(Allo)m(w)41
+b(alias)g(expansion)f(and)f(include)g(the)h Ft(alias)f
+Fu(and)g Ft(unalias)e Fu(builtins)j(\(see)g(Sec-)630
+2182 y(tion)31 b(6.6)g([Aliases],)i(page)e(94\).)150
+2344 y Ft(--enable-arith-for-comma)o(nd)630 2453 y Fu(Include)21
+b(supp)s(ort)g(for)g(the)i(alternate)g(form)f(of)g(the)g
+Ft(for)f Fu(command)h(that)h(b)s(eha)m(v)m(es)f(lik)m(e)i(the)630
+2563 y(C)30 b(language)i Ft(for)d Fu(statemen)m(t)j(\(see)g(Section)f
+(3.2.5.1)i([Lo)s(oping)d(Constructs],)h(page)g(10\).)150
+2725 y Ft(--enable-array-variables)630 2834 y Fu(Include)h(supp)s(ort)g
+(for)h(one-dimensional)h(arra)m(y)f(shell)h(v)-5 b(ariables)33
+b(\(see)h(Section)g(6.7)h([Ar-)630 2944 y(ra)m(ys],)c(page)g(95\).)150
+3106 y Ft(--enable-bang-history)630 3215 y Fu(Include)36
+b(supp)s(ort)f(for)h Ft(csh)p Fu(-lik)m(e)h(history)g(substitution)f
+(\(see)h(Section)g(9.3)h([History)f(In-)630 3325 y(teraction],)c(page)e
+(148\).)150 3487 y Ft(--enable-brace-expansion)630 3597
+y Fu(Include)40 b Ft(csh)p Fu(-lik)m(e)h(brace)f(expansion)g(\()h
+Ft(b{a,b}c)d Fq(7!)i Ft(bac)30 b(bbc)39 b Fu(\).)71 b(See)40
+b(Section)h(3.5.1)630 3706 y([Brace)32 b(Expansion],)e(page)h(23,)h
+(for)e(a)g(complete)i(description.)150 3868 y Ft
+(--enable-casemod-attribu)o(tes)630 3978 y Fu(Include)37
+b(supp)s(ort)g(for)g(case-mo)s(difying)i(attributes)g(in)e(the)h
+Ft(declare)e Fu(builtin)i(and)f(as-)630 4087 y(signmen)m(t)29
+b(statemen)m(ts.)41 b(V)-8 b(ariables)30 b(with)e(the)g
+Fr(upp)s(ercase)k Fu(attribute,)e(for)e(example,)i(will)630
+4197 y(ha)m(v)m(e)i(their)e(v)-5 b(alues)31 b(con)m(v)m(erted)h(to)f
+(upp)s(ercase)e(up)s(on)g(assignmen)m(t.)150 4359 y Ft
+(--enable-casemod-expansi)o(on)630 4468 y Fu(Include)h(supp)s(ort)e
+(for)i(case-mo)s(difying)i(w)m(ord)e(expansions.)150
+4630 y Ft(--enable-command-timing)630 4740 y Fu(Include)43
+b(supp)s(ort)f(for)h(recognizing)i Ft(time)e Fu(as)g(a)h(reserv)m(ed)g
+(w)m(ord)f(and)g(for)h(displa)m(ying)630 4849 y(timing)37
+b(statistics)h(for)e(the)g(pip)s(eline)g(follo)m(wing)i
+Ft(time)d Fu(\(see)i(Section)g(3.2.3)h([Pip)s(elines],)630
+4959 y(page)24 b(8\).)39 b(This)23 b(allo)m(ws)h(pip)s(elines)f(as)h(w)
+m(ell)g(as)g(shell)f(builtins)g(and)g(functions)g(to)h(b)s(e)e(timed.)
+150 5121 y Ft(--enable-cond-command)630 5230 y Fu(Include)33
+b(supp)s(ort)f(for)i(the)g Ft([[)f Fu(conditional)i(command.)51
+b(\(see)34 b(Section)h(3.2.5.2)h([Condi-)630 5340 y(tional)c
+(Constructs],)e(page)h(11\).)p eop end
+%%Page: 157 163
+TeXDict begin 157 162 bop 150 -116 a Fu(Chapter)30 b(10:)41
+b(Installing)31 b(Bash)2356 b(157)150 299 y Ft(--enable-cond-regexp)630
+408 y Fu(Include)35 b(supp)s(ort)f(for)i(matc)m(hing)h
+Fm(posix)e Fu(regular)h(expressions)g(using)f(the)h(`)p
+Ft(=~)p Fu(')g(binary)630 518 y(op)s(erator)25 b(in)f(the)h
+Ft([[)f Fu(conditional)h(command.)39 b(\(see)25 b(Section)h(3.2.5.2)h
+([Conditional)e(Con-)630 628 y(structs],)31 b(page)g(11\).)150
+774 y Ft(--enable-coprocesses)630 883 y Fu(Include)23
+b(supp)s(ort)f(for)i(copro)s(cesses)g(and)f(the)h Ft(coproc)e
+Fu(reserv)m(ed)i(w)m(ord)g(\(see)h(Section)f(3.2.3)630
+993 y([Pip)s(elines],)31 b(page)g(8\).)150 1139 y Ft(--enable-debugger)
+630 1249 y Fu(Include)f(supp)s(ort)e(for)i(the)h(bash)f(debugger)g
+(\(distributed)g(separately\).)150 1395 y Ft(--enable-dev-fd-stat-bro)o
+(ken)630 1504 y Fu(If)c(calling)j Ft(stat)d Fu(on)g(/dev/fd/)p
+Fr(N)38 b Fu(returns)25 b(di\013eren)m(t)j(results)f(than)f(calling)j
+Ft(fstat)c Fu(on)i(\014le)630 1614 y(descriptor)g Fr(N)p
+Fu(,)i(supply)c(this)j(option)g(to)g(enable)f(a)h(w)m(ork)-5
+b(around.)39 b(This)27 b(has)g(implications)630 1724
+y(for)j(conditional)i(commands)e(that)h(test)g(\014le)g(attributes.)150
+1870 y Ft(--enable-direxpand-defau)o(lt)630 1979 y Fu(Cause)53
+b(the)g Ft(direxpand)d Fu(shell)j(option)h(\(see)g(Section)f(4.3.2)i
+([The)e(Shopt)f(Builtin],)630 2089 y(page)29 b(66\))g(to)f(b)s(e)f
+(enabled)h(b)m(y)g(default)g(when)e(the)i(shell)g(starts.)41
+b(It)27 b(is)h(normally)g(disabled)630 2198 y(b)m(y)i(default.)150
+2345 y Ft(--enable-directory-stack)630 2454 y Fu(Include)j(supp)s(ort)g
+(for)h(a)g Ft(csh)p Fu(-lik)m(e)h(directory)f(stac)m(k)i(and)d(the)i
+Ft(pushd)p Fu(,)f Ft(popd)p Fu(,)g(and)f Ft(dirs)630
+2564 y Fu(builtins)d(\(see)h(Section)g(6.8)h([The)e(Directory)i(Stac)m
+(k],)g(page)f(97\).)150 2710 y Ft(--enable-disabled-builti)o(ns)630
+2819 y Fu(Allo)m(w)40 b(builtin)e(commands)g(to)h(b)s(e)f(in)m(v)m(ok)m
+(ed)i(via)f(`)p Ft(builtin)29 b(xxx)p Fu(')37 b(ev)m(en)j(after)f
+Ft(xxx)e Fu(has)630 2929 y(b)s(een)31 b(disabled)g(using)g(`)p
+Ft(enable)d(-n)i(xxx)p Fu('.)43 b(See)32 b(Section)g(4.2)h([Bash)e
+(Builtins],)i(page)f(51,)630 3039 y(for)e(details)i(of)e(the)h
+Ft(builtin)d Fu(and)i Ft(enable)e Fu(builtin)i(commands.)150
+3185 y Ft(--enable-dparen-arithmet)o(ic)630 3294 y Fu(Include)42
+b(supp)s(ort)f(for)h(the)h Ft(\(\(...)o(\)\))f Fu(command)g(\(see)i
+(Section)f(3.2.5.2)i([Conditional)630 3404 y(Constructs],)30
+b(page)h(11\).)150 3550 y Ft(--enable-extended-glob)630
+3660 y Fu(Include)40 b(supp)s(ort)e(for)i(the)h(extended)f(pattern)h
+(matc)m(hing)g(features)g(describ)s(ed)e(ab)s(o)m(v)m(e)630
+3769 y(under)29 b(Section)i(3.5.8.1)i([P)m(attern)e(Matc)m(hing],)i
+(page)e(33.)150 3915 y Ft(--enable-extended-glob-d)o(efau)o(lt)630
+4025 y Fu(Set)40 b(the)g(default)g(v)-5 b(alue)41 b(of)f(the)g
+Fr(extglob)j Fu(shell)d(option)g(describ)s(ed)f(ab)s(o)m(v)m(e)i(under)
+d(Sec-)630 4134 y(tion)31 b(4.3.2)h([The)e(Shopt)g(Builtin],)h(page)g
+(66,)h(to)f(b)s(e)f(enabled.)150 4281 y Ft(--enable-function-import)630
+4390 y Fu(Include)23 b(supp)s(ort)g(for)g(imp)s(orting)h(function)g
+(de\014nitions)f(exp)s(orted)h(b)m(y)g(another)g(instance)630
+4500 y(of)31 b(the)f(shell)h(from)f(the)g(en)m(vironmen)m(t.)41
+b(This)30 b(option)h(is)f(enabled)h(b)m(y)f(default.)150
+4646 y Ft(--enable-glob-asciirange)o(-def)o(ault)630
+4756 y Fu(Set)h(the)g(default)f(v)-5 b(alue)31 b(of)g(the)g
+Fr(globasciiranges)36 b Fu(shell)31 b(option)g(describ)s(ed)f(ab)s(o)m
+(v)m(e)h(under)630 4865 y(Section)39 b(4.3.2)h([The)e(Shopt)g
+(Builtin],)j(page)e(66,)i(to)f(b)s(e)d(enabled.)65 b(This)37
+b(con)m(trols)j(the)630 4975 y(b)s(eha)m(vior)21 b(of)g(c)m(haracter)h
+(ranges)f(when)f(used)g(in)g(pattern)h(matc)m(hing)h(brac)m(k)m(et)g
+(expressions.)150 5121 y Ft(--enable-help-builtin)630
+5230 y Fu(Include)i(the)h Ft(help)f Fu(builtin,)h(whic)m(h)g(displa)m
+(ys)f(help)h(on)f(shell)h(builtins)f(and)h(v)-5 b(ariables)25
+b(\(see)630 5340 y(Section)31 b(4.2)h([Bash)e(Builtins],)i(page)f
+(51\).)p eop end
+%%Page: 158 164
+TeXDict begin 158 163 bop 150 -116 a Fu(Chapter)30 b(10:)41
+b(Installing)31 b(Bash)2356 b(158)150 299 y Ft(--enable-history)630
+408 y Fu(Include)29 b(command)g(history)h(and)f(the)h
+Ft(fc)f Fu(and)g Ft(history)e Fu(builtin)j(commands)f(\(see)h(Sec-)630
+518 y(tion)h(9.1)g([Bash)g(History)g(F)-8 b(acilities],)34
+b(page)d(146\).)150 664 y Ft(--enable-job-control)630
+774 y Fu(This)h(enables)i(the)f(job)g(con)m(trol)i(features)e(\(see)i
+(Chapter)d(7)i([Job)f(Con)m(trol],)i(page)f(107\),)630
+883 y(if)c(the)h(op)s(erating)g(system)f(supp)s(orts)f(them.)150
+1029 y Ft(--enable-multibyte)630 1139 y Fu(This)g(enables)i(supp)s(ort)
+d(for)i(m)m(ultib)m(yte)h(c)m(haracters)g(if)f(the)g(op)s(erating)h
+(system)f(pro)m(vides)630 1249 y(the)h(necessary)f(supp)s(ort.)150
+1395 y Ft(--enable-net-redirection)o(s)630 1504 y Fu(This)23
+b(enables)h(the)g(sp)s(ecial)h(handling)e(of)h(\014lenames)g(of)g(the)g
+(form)g Ft(/dev/tcp/)p Fj(host)p Ft(/)p Fj(port)630 1614
+y Fu(and)31 b Ft(/dev/udp/)p Fj(host)p Ft(/)p Fj(port)26
+b Fu(when)31 b(used)g(in)g(redirections)h(\(see)g(Section)g(3.6)h
+([Redirec-)630 1724 y(tions],)e(page)g(35\).)150 1870
+y Ft(--enable-process-substit)o(utio)o(n)630 1979 y Fu(This)49
+b(enables)i(pro)s(cess)f(substitution)g(\(see)h(Section)g(3.5.6)h([Pro)
+s(cess)e(Substitution],)630 2089 y(page)31 b(32\))h(if)e(the)h(op)s
+(erating)f(system)h(pro)m(vides)f(the)h(necessary)g(supp)s(ort.)150
+2235 y Ft(--enable-progcomp)630 2345 y Fu(Enable)d(the)g(programmable)g
+(completion)i(facilities)g(\(see)f(Section)g(8.6)g([Programmable)630
+2454 y(Completion],)i(page)h(137\).)42 b(If)30 b(Readline)h(is)f(not)h
+(enabled,)f(this)h(option)g(has)f(no)g(e\013ect.)150
+2600 y Ft(--enable-prompt-string-d)o(ecod)o(ing)630 2710
+y Fu(T)-8 b(urn)30 b(on)i(the)f(in)m(terpretation)i(of)f(a)g(n)m(um)m
+(b)s(er)e(of)i(bac)m(kslash-escap)s(ed)g(c)m(haracters)i(in)d(the)630
+2819 y Ft($PS0)p Fu(,)36 b Ft($PS1)p Fu(,)g Ft($PS2)p
+Fu(,)h(and)e Ft($PS4)f Fu(prompt)h(strings.)57 b(See)36
+b(Section)h(6.9)g([Con)m(trolling)g(the)630 2929 y(Prompt],)30
+b(page)h(98,)h(for)e(a)h(complete)h(list)f(of)f(prompt)g(string)g
+(escap)s(e)h(sequences.)150 3075 y Ft(--enable-readline)630
+3185 y Fu(Include)d(supp)s(ort)f(for)h(command-line)h(editing)g(and)f
+(history)g(with)g(the)h(Bash)g(v)m(ersion)g(of)630 3294
+y(the)i(Readline)g(library)f(\(see)h(Chapter)f(8)g([Command)g(Line)g
+(Editing],)h(page)g(111\).)150 3440 y Ft(--enable-restricted)630
+3550 y Fu(Include)41 b(supp)s(ort)f(for)i(a)g Fr(restricted)g(shell)p
+Fu(.)75 b(If)42 b(this)f(is)h(enabled,)j(Bash,)g(when)c(called)630
+3660 y(as)f Ft(rbash)p Fu(,)h(en)m(ters)f(a)g(restricted)h(mo)s(de.)68
+b(See)40 b(Section)h(6.10)g([The)f(Restricted)h(Shell],)630
+3769 y(page)31 b(100,)h(for)e(a)h(description)f(of)h(restricted)g(mo)s
+(de.)150 3915 y Ft(--enable-select)630 4025 y Fu(Include)25
+b(the)h Ft(select)f Fu(comp)s(ound)f(command,)j(whic)m(h)e(allo)m(ws)j
+(the)e(generation)h(of)f(simple)630 4134 y(men)m(us)k(\(see)h(Section)g
+(3.2.5.2)i([Conditional)e(Constructs],)g(page)g(11\).)150
+4281 y Ft(--enable-separate-helpfi)o(les)630 4390 y Fu(Use)h(external)h
+(\014les)f(for)g(the)g(do)s(cumen)m(tation)h(displa)m(y)m(ed)f(b)m(y)g
+(the)g Ft(help)f Fu(builtin)h(instead)630 4500 y(of)f(storing)f(the)h
+(text)g(in)m(ternally)-8 b(.)150 4646 y Ft(--enable-single-help-str)o
+(ings)630 4756 y Fu(Store)40 b(the)g(text)h(displa)m(y)m(ed)g(b)m(y)e
+(the)i Ft(help)d Fu(builtin)i(as)g(a)g(single)h(string)f(for)f(eac)m(h)
+i(help)630 4865 y(topic.)54 b(This)33 b(aids)i(in)f(translating)h(the)g
+(text)g(to)g(di\013eren)m(t)g(languages.)54 b(Y)-8 b(ou)35
+b(ma)m(y)g(need)630 4975 y(to)c(disable)g(this)f(if)g(y)m(our)h
+(compiler)g(cannot)f(handle)g(v)m(ery)h(long)g(string)f(literals.)150
+5121 y Ft(--enable-strict-posix-de)o(faul)o(t)630 5230
+y Fu(Mak)m(e)c(Bash)f Fm(posix)p Fu(-conforman)m(t)g(b)m(y)f(default)h
+(\(see)g(Section)h(6.11)g([Bash)f(POSIX)e(Mo)s(de],)630
+5340 y(page)31 b(101\).)p eop end
+%%Page: 159 165
+TeXDict begin 159 164 bop 150 -116 a Fu(Chapter)30 b(10:)41
+b(Installing)31 b(Bash)2356 b(159)150 299 y Ft
+(--enable-usg-echo-defaul)o(t)630 408 y Fu(A)30 b(synon)m(ym)g(for)g
+Ft(--enable-xpg-echo-default)p Fu(.)150 568 y Ft
+(--enable-xpg-echo-defaul)o(t)630 677 y Fu(Mak)m(e)c(the)f
+Ft(echo)e Fu(builtin)i(expand)f(bac)m(kslash-escap)s(ed)h(c)m
+(haracters)h(b)m(y)f(default,)h(without)630 787 y(requiring)d(the)h
+Ft(-e)f Fu(option.)39 b(This)23 b(sets)h(the)g(default)g(v)-5
+b(alue)24 b(of)g(the)g Ft(xpg_echo)e Fu(shell)h(option)630
+897 y(to)28 b Ft(on)p Fu(,)g(whic)m(h)f(mak)m(es)h(the)g(Bash)f
+Ft(echo)f Fu(b)s(eha)m(v)m(e)i(more)g(lik)m(e)h(the)e(v)m(ersion)h(sp)s
+(eci\014ed)f(in)g(the)630 1006 y(Single)35 b(Unix)f(Sp)s
+(eci\014cation,)i(v)m(ersion)e(3.)53 b(See)35 b(Section)g(4.2)g([Bash)g
+(Builtins],)h(page)f(51,)630 1116 y(for)30 b(a)h(description)f(of)h
+(the)f(escap)s(e)h(sequences)g(that)g Ft(echo)e Fu(recognizes.)275
+1275 y(The)f(\014le)i Ft(config-top.h)c Fu(con)m(tains)31
+b(C)d(Prepro)s(cessor)h(`)p Ft(#define)p Fu(')f(statemen)m(ts)j(for)f
+(options)f(whic)m(h)150 1385 y(are)35 b(not)g(settable)i(from)d
+Ft(configure)p Fu(.)51 b(Some)35 b(of)g(these)g(are)h(not)f(mean)m(t)g
+(to)h(b)s(e)e(c)m(hanged;)k(b)s(ew)m(are)d(of)150 1494
+y(the)h(consequences)g(if)f(y)m(ou)h(do.)55 b(Read)36
+b(the)g(commen)m(ts)g(asso)s(ciated)h(with)e(eac)m(h)i(de\014nition)e
+(for)g(more)150 1604 y(information)c(ab)s(out)f(its)h(e\013ect.)p
+eop end
+%%Page: 160 166
+TeXDict begin 160 165 bop 3614 -116 a Fu(160)150 299
+y Fp(App)t(endix)52 b(A)81 b(Rep)t(orting)53 b(Bugs)150
+533 y Fu(Please)33 b(rep)s(ort)e(all)h(bugs)f(y)m(ou)h(\014nd)e(in)i
+(Bash.)44 b(But)32 b(\014rst,)g(y)m(ou)g(should)e(mak)m(e)j(sure)e
+(that)h(it)g(really)h(is)f(a)150 643 y(bug,)d(and)g(that)h(it)g(app)s
+(ears)f(in)g(the)h(latest)h(v)m(ersion)f(of)g(Bash.)40
+b(The)29 b(latest)j(v)m(ersion)e(of)f(Bash)h(is)f(alw)m(a)m(ys)150
+752 y(a)m(v)-5 b(ailable)33 b(for)d(FTP)g(from)g Ft
+(ftp://ftp.gnu.org/pub/gn)o(u/ba)o(sh/)o Fu(.)275 887
+y(Once)41 b(y)m(ou)g(ha)m(v)m(e)h(determined)f(that)h(a)f(bug)g
+(actually)h(exists,)j(use)c(the)g Ft(bashbug)e Fu(command)i(to)150
+996 y(submit)25 b(a)h(bug)g(rep)s(ort.)38 b(If)26 b(y)m(ou)g(ha)m(v)m
+(e)h(a)f(\014x,)h(y)m(ou)f(are)g(encouraged)h(to)f(mail)h(that)f(as)g
+(w)m(ell!)40 b(Suggestions)150 1106 y(and)j(`philosophical')i(bug)e
+(rep)s(orts)f(ma)m(y)j(b)s(e)e(mailed)h(to)g Ft(bug-bash@gnu)11
+b(.)g(org)39 b Fu(or)k(p)s(osted)g(to)i(the)150 1215
+y(Usenet)31 b(newsgroup)e Ft(gnu.bash.bug)p Fu(.)275
+1350 y(All)i(bug)e(rep)s(orts)h(should)f(include:)225
+1484 y Fq(\017)60 b Fu(The)30 b(v)m(ersion)h(n)m(um)m(b)s(er)e(of)h
+(Bash.)225 1619 y Fq(\017)60 b Fu(The)30 b(hardw)m(are)g(and)g(op)s
+(erating)g(system.)225 1753 y Fq(\017)60 b Fu(The)30
+b(compiler)h(used)e(to)i(compile)h(Bash.)225 1888 y Fq(\017)60
+b Fu(A)30 b(description)h(of)f(the)h(bug)f(b)s(eha)m(viour.)225
+2022 y Fq(\017)60 b Fu(A)30 b(short)h(script)f(or)g(`recip)s(e')h(whic)
+m(h)f(exercises)i(the)e(bug)g(and)g(ma)m(y)h(b)s(e)f(used)f(to)i(repro)
+s(duce)e(it.)150 2182 y Ft(bashbug)d Fu(inserts)i(the)h(\014rst)f
+(three)g(items)h(automatically)i(in)m(to)f(the)e(template)i(it)f(pro)m
+(vides)f(for)g(\014ling)h(a)150 2291 y(bug)h(rep)s(ort.)275
+2426 y(Please)h(send)f(all)h(rep)s(orts)f(concerning)g(this)h(man)m
+(ual)f(to)h Ft(bug-bash@gnu.org)p Fu(.)p eop end
+%%Page: 161 167
+TeXDict begin 161 166 bop 3614 -116 a Fu(161)150 141
+y Fp(App)t(endix)58 b(B)81 b(Ma)9 b(jor)54 b(Di\013erences)d(F)-13
+b(rom)54 b(The)g(Bourne)1088 299 y(Shell)150 530 y Fu(Bash)26
+b(implemen)m(ts)h(essen)m(tially)g(the)g(same)f(grammar,)h(parameter)f
+(and)g(v)-5 b(ariable)27 b(expansion,)g(redirec-)150
+640 y(tion,)i(and)e(quoting)g(as)h(the)g(Bourne)f(Shell.)40
+b(Bash)27 b(uses)g(the)h Fm(posix)f Fu(standard)f(as)i(the)g(sp)s
+(eci\014cation)g(of)150 749 y(ho)m(w)34 b(these)h(features)g(are)g(to)g
+(b)s(e)f(implemen)m(ted.)53 b(There)34 b(are)h(some)g(di\013erences)g
+(b)s(et)m(w)m(een)g(the)g(tradi-)150 859 y(tional)e(Bourne)e(shell)h
+(and)f(Bash;)i(this)f(section)g(quic)m(kly)h(details)g(the)e
+(di\013erences)h(of)g(signi\014cance.)46 b(A)150 969
+y(n)m(um)m(b)s(er)24 b(of)h(these)h(di\013erences)f(are)h(explained)f
+(in)g(greater)h(depth)f(in)g(previous)f(sections.)40
+b(This)25 b(section)150 1078 y(uses)33 b(the)i(v)m(ersion)f(of)g
+Ft(sh)f Fu(included)g(in)h(SVR4.2)h(\(the)f(last)h(v)m(ersion)f(of)g
+(the)g(historical)i(Bourne)d(shell\))150 1188 y(as)e(the)f(baseline)h
+(reference.)225 1322 y Fq(\017)60 b Fu(Bash)32 b(is)h
+Fm(posix)p Fu(-conforman)m(t,)g(ev)m(en)g(where)f(the)g
+Fm(posix)g Fu(sp)s(eci\014cation)h(di\013ers)f(from)g(traditional)330
+1431 y Ft(sh)e Fu(b)s(eha)m(vior)g(\(see)i(Section)f(6.11)h([Bash)e
+(POSIX)g(Mo)s(de],)h(page)g(101\).)225 1565 y Fq(\017)60
+b Fu(Bash)26 b(has)g(m)m(ulti-c)m(haracter)i(in)m(v)m(o)s(cation)g
+(options)f(\(see)f(Section)h(6.1)g([In)m(v)m(oking)g(Bash],)h(page)e
+(86\).)225 1699 y Fq(\017)60 b Fu(Bash)40 b(has)f(command-line)h
+(editing)g(\(see)h(Chapter)e(8)h([Command)f(Line)g(Editing],)k(page)d
+(111\))330 1809 y(and)30 b(the)g Ft(bind)g Fu(builtin.)225
+1943 y Fq(\017)60 b Fu(Bash)46 b(pro)m(vides)g(a)g(programmable)g(w)m
+(ord)f(completion)i(mec)m(hanism)f(\(see)h(Section)g(8.6)g([Pro-)330
+2052 y(grammable)39 b(Completion],)i(page)e(137\),)i(and)d(builtin)g
+(commands)f Ft(complete)p Fu(,)h Ft(compgen)p Fu(,)h(and)330
+2162 y Ft(compopt)p Fu(,)29 b(to)i(manipulate)g(it.)225
+2296 y Fq(\017)60 b Fu(Bash)26 b(has)f(command)h(history)f(\(see)i
+(Section)f(9.1)h([Bash)f(History)h(F)-8 b(acilities],)30
+b(page)c(146\))i(and)d(the)330 2405 y Ft(history)k Fu(and)h
+Ft(fc)g Fu(builtins)g(to)h(manipulate)g(it.)42 b(The)30
+b(Bash)h(history)g(list)g(main)m(tains)g(timestamp)330
+2515 y(information)g(and)e(uses)h(the)h(v)-5 b(alue)31
+b(of)f(the)h Ft(HISTTIMEFORMAT)26 b Fu(v)-5 b(ariable)32
+b(to)f(displa)m(y)f(it.)225 2649 y Fq(\017)60 b Fu(Bash)48
+b(implemen)m(ts)h Ft(csh)p Fu(-lik)m(e)g(history)f(expansion)g(\(see)h
+(Section)g(9.3)h([History)f(In)m(teraction],)330 2759
+y(page)31 b(148\).)225 2892 y Fq(\017)60 b Fu(Bash)33
+b(has)g(one-dimensional)h(arra)m(y)f(v)-5 b(ariables)34
+b(\(see)g(Section)g(6.7)g([Arra)m(ys],)g(page)g(95\),)h(and)e(the)330
+3002 y(appropriate)39 b(v)-5 b(ariable)40 b(expansions)f(and)g
+(assignmen)m(t)h(syn)m(tax)g(to)g(use)f(them.)67 b(Sev)m(eral)40
+b(of)g(the)330 3112 y(Bash)32 b(builtins)f(tak)m(e)j(options)e(to)h
+(act)g(on)e(arra)m(ys.)46 b(Bash)32 b(pro)m(vides)g(a)g(n)m(um)m(b)s
+(er)f(of)h(built-in)f(arra)m(y)330 3221 y(v)-5 b(ariables.)225
+3355 y Fq(\017)60 b Fu(The)37 b Ft($'...)n(')g Fu(quoting)g(syn)m(tax,)
+j(whic)m(h)d(expands)f(ANSI-C)h(bac)m(kslash-escap)s(ed)h(c)m
+(haracters)g(in)330 3465 y(the)26 b(text)h(b)s(et)m(w)m(een)g(the)g
+(single)f(quotes,)i(is)e(supp)s(orted)f(\(see)i(Section)g(3.1.2.4)h
+([ANSI-C)e(Quoting],)330 3574 y(page)31 b(6\).)225 3708
+y Fq(\017)60 b Fu(Bash)30 b(supp)s(orts)f(the)h Ft($"...)o(")f
+Fu(quoting)i(syn)m(tax)g(to)f(do)g(lo)s(cale-sp)s(eci\014c)i
+(translation)g(of)e(the)g(c)m(har-)330 3818 y(acters)g(b)s(et)m(w)m
+(een)f(the)f(double)g(quotes.)41 b(The)28 b Ft(-D)p Fu(,)h
+Ft(--dump-strings)p Fu(,)c(and)j Ft(--dump-po-strings)330
+3927 y Fu(in)m(v)m(o)s(cation)42 b(options)d(list)i(the)e(translatable)
+i(strings)f(found)e(in)h(a)h(script)g(\(see)g(Section)g(3.1.2.5)330
+4037 y([Lo)s(cale)32 b(T)-8 b(ranslation],)31 b(page)h(7\).)225
+4171 y Fq(\017)60 b Fu(Bash)44 b(implemen)m(ts)g(the)f
+Ft(!)h Fu(k)m(eyw)m(ord)g(to)g(negate)h(the)f(return)e(v)-5
+b(alue)44 b(of)g(a)g(pip)s(eline)f(\(see)h(Sec-)330 4281
+y(tion)33 b(3.2.3)i([Pip)s(elines],)f(page)g(8\).)49
+b(V)-8 b(ery)33 b(useful)f(when)g(an)h Ft(if)f Fu(statemen)m(t)j(needs)
+d(to)i(act)g(only)f(if)330 4390 y(a)k(test)h(fails.)60
+b(The)36 b(Bash)g(`)p Ft(-o)30 b(pipefail)p Fu(')35 b(option)i(to)h
+Ft(set)d Fu(will)i(cause)g(a)g(pip)s(eline)g(to)g(return)f(a)330
+4500 y(failure)31 b(status)f(if)h(an)m(y)f(command)g(fails.)225
+4634 y Fq(\017)60 b Fu(Bash)34 b(has)g(the)g Ft(time)f
+Fu(reserv)m(ed)h(w)m(ord)g(and)f(command)h(timing)h(\(see)g(Section)g
+(3.2.3)g([Pip)s(elines],)330 4743 y(page)g(8\).)52 b(The)33
+b(displa)m(y)i(of)f(the)g(timing)g(statistics)i(ma)m(y)f(b)s(e)e(con)m
+(trolled)j(with)e(the)g Ft(TIMEFORMAT)330 4853 y Fu(v)-5
+b(ariable.)225 4987 y Fq(\017)60 b Fu(Bash)28 b(implemen)m(ts)g(the)f
+Ft(for)j(\(\()g Fj(expr1)f Ft(;)h Fj(expr2)f Ft(;)h Fj(expr3)f
+Ft(\)\))e Fu(arithmetic)h(for)g(command,)g(sim-)330 5096
+y(ilar)j(to)g(the)g(C)f(language)h(\(see)h(Section)f(3.2.5.1)i([Lo)s
+(oping)d(Constructs],)h(page)g(10\).)225 5230 y Fq(\017)60
+b Fu(Bash)31 b(includes)f(the)g Ft(select)f Fu(comp)s(ound)g(command,)i
+(whic)m(h)f(allo)m(ws)i(the)f(generation)g(of)g(simple)330
+5340 y(men)m(us)f(\(see)h(Section)g(3.2.5.2)i([Conditional)e
+(Constructs],)g(page)g(11\).)p eop end
+%%Page: 162 168
+TeXDict begin 162 167 bop 150 -116 a Fu(App)s(endix)29
+b(B:)i(Ma)5 b(jor)31 b(Di\013erences)g(F)-8 b(rom)31
+b(The)f(Bourne)g(Shell)1258 b(162)225 299 y Fq(\017)60
+b Fu(Bash)40 b(includes)g(the)g Ft([[)g Fu(comp)s(ound)e(command,)43
+b(whic)m(h)c(mak)m(es)i(conditional)h(testing)f(part)f(of)330
+408 y(the)f(shell)g(grammar)g(\(see)h(Section)f(3.2.5.2)j([Conditional)
+d(Constructs],)i(page)f(11\),)i(including)330 518 y(optional)32
+b(regular)e(expression)g(matc)m(hing.)225 653 y Fq(\017)60
+b Fu(Bash)31 b(pro)m(vides)f(optional)h(case-insensitiv)m(e)i(matc)m
+(hing)f(for)e(the)g Ft(case)g Fu(and)f Ft([[)h Fu(constructs.)225
+789 y Fq(\017)60 b Fu(Bash)27 b(includes)g(brace)h(expansion)f(\(see)h
+(Section)g(3.5.1)i([Brace)e(Expansion],)g(page)g(23\))h(and)d(tilde)330
+898 y(expansion)k(\(see)i(Section)f(3.5.2)h([Tilde)f(Expansion],)f
+(page)h(24\).)225 1034 y Fq(\017)60 b Fu(Bash)24 b(implemen)m(ts)h
+(command)e(aliases)j(and)d(the)i Ft(alias)d Fu(and)i
+Ft(unalias)e Fu(builtins)h(\(see)i(Section)g(6.6)330
+1143 y([Aliases],)32 b(page)f(94\).)225 1279 y Fq(\017)60
+b Fu(Bash)32 b(pro)m(vides)g(shell)g(arithmetic,)i(the)e
+Ft(\(\()g Fu(comp)s(ound)e(command)i(\(see)h(Section)f(3.2.5.2)j([Con-)
+330 1388 y(ditional)d(Constructs],)e(page)i(11\),)g(and)e(arithmetic)i
+(expansion)e(\(see)i(Section)f(6.5)h([Shell)f(Arith-)330
+1498 y(metic],)h(page)f(93\).)225 1633 y Fq(\017)60 b
+Fu(V)-8 b(ariables)31 b(presen)m(t)e(in)g(the)g(shell's)h(initial)g(en)
+m(vironmen)m(t)g(are)g(automatically)i(exp)s(orted)d(to)h(c)m(hild)330
+1743 y(pro)s(cesses.)38 b(The)23 b(Bourne)g(shell)g(do)s(es)g(not)g
+(normally)g(do)g(this)g(unless)g(the)g(v)-5 b(ariables)24
+b(are)f(explicitly)330 1852 y(mark)m(ed)30 b(using)g(the)h
+Ft(export)e Fu(command.)225 1988 y Fq(\017)60 b Fu(Bash)26
+b(supp)s(orts)d(the)j(`)p Ft(+=)p Fu(')f(assignmen)m(t)i(op)s(erator,)g
+(whic)m(h)e(app)s(ends)f(to)i(the)g(v)-5 b(alue)26 b(of)f(the)h(v)-5
+b(ariable)330 2097 y(named)30 b(on)g(the)h(left)g(hand)e(side.)225
+2233 y Fq(\017)60 b Fu(Bash)36 b(includes)g(the)g Fm(posix)f
+Fu(pattern)h(remo)m(v)-5 b(al)37 b(`)p Ft(\045)p Fu(',)h(`)p
+Ft(#)p Fu(',)g(`)p Ft(\045\045)p Fu(')e(and)f(`)p Ft(##)p
+Fu(')h(expansions)g(to)g(remo)m(v)m(e)330 2342 y(leading)f(or)f
+(trailing)h(substrings)e(from)g(v)-5 b(ariable)35 b(v)-5
+b(alues)35 b(\(see)g(Section)g(3.5.3)g([Shell)g(P)m(arameter)330
+2452 y(Expansion],)30 b(page)h(25\).)225 2587 y Fq(\017)60
+b Fu(The)46 b(expansion)g Ft(${#xx})p Fu(,)j(whic)m(h)d(returns)f(the)i
+(length)f(of)h Ft(${xx})p Fu(,)i(is)e(supp)s(orted)d(\(see)j(Sec-)330
+2697 y(tion)31 b(3.5.3)h([Shell)f(P)m(arameter)g(Expansion],)f(page)i
+(25\).)225 2832 y Fq(\017)60 b Fu(The)30 b(expansion)g
+Ft(${var:)p Fr(o\013set)r Ft([:)p Fr(length)p Ft(]})p
+Fu(,)g(whic)m(h)g(expands)g(to)h(the)g(substring)e(of)i
+Ft(var)p Fu('s)e(v)-5 b(alue)330 2942 y(of)43 b(length)g
+Fr(length)p Fu(,)k(b)s(eginning)42 b(at)i Fr(o\013set)p
+Fu(,)j(is)c(presen)m(t)g(\(see)g(Section)h(3.5.3)h([Shell)e(P)m
+(arameter)330 3051 y(Expansion],)30 b(page)h(25\).)225
+3187 y Fq(\017)60 b Fu(The)21 b(expansion)f Ft(${var/[/])p
+Fr(pattern)p Ft([/)p Fr(replacemen)m(t)r Ft(]})p Fu(,)i(whic)m(h)e
+(matc)m(hes)j Fr(pattern)e Fu(and)f(replaces)330 3296
+y(it)29 b(with)e Fr(replacemen)m(t)32 b Fu(in)c(the)g(v)-5
+b(alue)29 b(of)f Ft(var)p Fu(,)g(is)g(a)m(v)-5 b(ailable)31
+b(\(see)e(Section)f(3.5.3)i([Shell)f(P)m(arameter)330
+3406 y(Expansion],)h(page)h(25\).)225 3541 y Fq(\017)60
+b Fu(The)33 b(expansion)g Ft(${!)p Fj(prefix)p Ft(*})d
+Fu(expansion,)k(whic)m(h)e(expands)h(to)h(the)f(names)g(of)g(all)h
+(shell)f(v)-5 b(ari-)330 3651 y(ables)36 b(whose)g(names)g(b)s(egin)g
+(with)g Fr(pre\014x)p Fu(,)g(is)g(a)m(v)-5 b(ailable)39
+b(\(see)e(Section)g(3.5.3)g([Shell)g(P)m(arameter)330
+3761 y(Expansion],)30 b(page)h(25\).)225 3896 y Fq(\017)60
+b Fu(Bash)22 b(has)f Fr(indirect)j Fu(v)-5 b(ariable)22
+b(expansion)g(using)f Ft(${!word})e Fu(\(see)k(Section)f(3.5.3)i
+([Shell)e(P)m(arameter)330 4006 y(Expansion],)30 b(page)h(25\).)225
+4141 y Fq(\017)60 b Fu(Bash)31 b(can)f(expand)g(p)s(ositional)h
+(parameters)g(b)s(ey)m(ond)e Ft($9)h Fu(using)g Ft(${)p
+Fj(num)p Ft(})p Fu(.)225 4276 y Fq(\017)60 b Fu(The)27
+b Fm(posix)g Ft($\(\))g Fu(form)g(of)h(command)g(substitution)f(is)h
+(implemen)m(ted)g(\(see)h(Section)f(3.5.4)i([Com-)330
+4386 y(mand)38 b(Substitution],)k(page)e(31\),)j(and)38
+b(preferred)g(to)i(the)g(Bourne)f(shell's)h Ft(``)e Fu(\(whic)m(h)i(is)
+f(also)330 4495 y(implemen)m(ted)31 b(for)f(bac)m(kw)m(ards)h
+(compatibilit)m(y\).)225 4631 y Fq(\017)60 b Fu(Bash)31
+b(has)f(pro)s(cess)g(substitution)g(\(see)h(Section)g(3.5.6)h([Pro)s
+(cess)f(Substitution],)f(page)h(32\).)225 4766 y Fq(\017)60
+b Fu(Bash)55 b(automatically)j(assigns)e(v)-5 b(ariables)55
+b(that)h(pro)m(vide)f(information)h(ab)s(out)f(the)g(curren)m(t)330
+4876 y(user)40 b(\()p Ft(UID)p Fu(,)i Ft(EUID)p Fu(,)g(and)e
+Ft(GROUPS)p Fu(\),)h(the)g(curren)m(t)f(host)g(\()p Ft(HOSTTYPE)p
+Fu(,)h Ft(OSTYPE)p Fu(,)h Ft(MACHTYPE)p Fu(,)f(and)330
+4985 y Ft(HOSTNAME)p Fu(\),)55 b(and)c(the)g(instance)h(of)g(Bash)f
+(that)h(is)f(running)f(\()p Ft(BASH)p Fu(,)56 b Ft(BASH_VERSION)p
+Fu(,)e(and)330 5095 y Ft(BASH_VERSINFO)p Fu(\).)37 b(See)31
+b(Section)g(5.2)h([Bash)e(V)-8 b(ariables],)33 b(page)e(73,)g(for)f
+(details.)225 5230 y Fq(\017)60 b Fu(The)44 b Ft(IFS)f
+Fu(v)-5 b(ariable)45 b(is)f(used)f(to)i(split)f(only)g(the)g(results)g
+(of)h(expansion,)i(not)d(all)h(w)m(ords)f(\(see)330 5340
+y(Section)29 b(3.5.7)h([W)-8 b(ord)29 b(Splitting],)h(page)f(32\).)41
+b(This)28 b(closes)h(a)g(longstanding)g(shell)f(securit)m(y)h(hole.)p
+eop end
+%%Page: 163 169
+TeXDict begin 163 168 bop 150 -116 a Fu(App)s(endix)29
+b(B:)i(Ma)5 b(jor)31 b(Di\013erences)g(F)-8 b(rom)31
+b(The)f(Bourne)g(Shell)1258 b(163)225 299 y Fq(\017)60
+b Fu(The)36 b(\014lename)h(expansion)f(brac)m(k)m(et)i(expression)f(co)
+s(de)f(uses)g(`)p Ft(!)p Fu(')h(and)f(`)p Ft(^)p Fu(')h(to)g(negate)h
+(the)f(set)g(of)330 408 y(c)m(haracters)32 b(b)s(et)m(w)m(een)f(the)f
+(brac)m(k)m(ets.)43 b(The)29 b(Bourne)i(shell)f(uses)g(only)h(`)p
+Ft(!)p Fu('.)225 536 y Fq(\017)60 b Fu(Bash)38 b(implemen)m(ts)g(the)g
+(full)g(set)g(of)g Fm(posix)f Fu(\014lename)h(expansion)g(op)s
+(erators,)i(including)d Fr(c)m(har-)330 646 y(acter)i(classes)p
+Fu(,)j Fr(equiv)-5 b(alence)39 b(classes)p Fu(,)j(and)37
+b Fr(collating)k(sym)m(b)s(ols)g Fu(\(see)e(Section)g(3.5.8)h
+([Filename)330 756 y(Expansion],)30 b(page)h(33\).)225
+883 y Fq(\017)60 b Fu(Bash)35 b(implemen)m(ts)g(extended)g(pattern)g
+(matc)m(hing)h(features)f(when)f(the)h Ft(extglob)d Fu(shell)j(option)
+330 993 y(is)30 b(enabled)h(\(see)g(Section)g(3.5.8.1)i([P)m(attern)f
+(Matc)m(hing],)g(page)f(33\).)225 1121 y Fq(\017)60 b
+Fu(It)22 b(is)g(p)s(ossible)g(to)h(ha)m(v)m(e)g(a)f(v)-5
+b(ariable)23 b(and)f(a)g(function)g(with)g(the)g(same)g(name;)j
+Ft(sh)d Fu(do)s(es)g(not)g(separate)330 1230 y(the)31
+b(t)m(w)m(o)g(name)g(spaces.)225 1358 y Fq(\017)60 b
+Fu(Bash)30 b(functions)e(are)i(p)s(ermitted)f(to)h(ha)m(v)m(e)h(lo)s
+(cal)g(v)-5 b(ariables)30 b(using)f(the)g Ft(local)f
+Fu(builtin,)i(and)e(th)m(us)330 1468 y(useful)i(recursiv)m(e)g
+(functions)g(ma)m(y)h(b)s(e)f(written)g(\(see)i(Section)f(4.2)g([Bash)g
+(Builtins],)g(page)h(51\).)225 1596 y Fq(\017)60 b Fu(V)-8
+b(ariable)25 b(assignmen)m(ts)g(preceding)e(commands)h(a\013ect)h(only)
+f(that)g(command,)h(ev)m(en)f(builtins)g(and)330 1705
+y(functions)36 b(\(see)h(Section)g(3.7.4)h([En)m(vironmen)m(t],)h(page)
+e(41\).)60 b(In)35 b Ft(sh)p Fu(,)j(all)f(v)-5 b(ariable)37
+b(assignmen)m(ts)330 1815 y(preceding)30 b(commands)g(are)h(global)h
+(unless)d(the)i(command)f(is)h(executed)g(from)f(the)g(\014le)h
+(system.)225 1943 y Fq(\017)60 b Fu(Bash)44 b(p)s(erforms)e(\014lename)
+i(expansion)f(on)h(\014lenames)g(sp)s(eci\014ed)f(as)h(op)s(erands)e
+(to)j(input)e(and)330 2052 y(output)30 b(redirection)h(op)s(erators)g
+(\(see)g(Section)g(3.6)h([Redirections],)g(page)f(35\).)225
+2180 y Fq(\017)60 b Fu(Bash)29 b(con)m(tains)h(the)f(`)p
+Ft(<>)p Fu(')f(redirection)i(op)s(erator,)f(allo)m(wing)i(a)e(\014le)g
+(to)g(b)s(e)f(op)s(ened)g(for)h(b)s(oth)f(read-)330 2290
+y(ing)35 b(and)f(writing,)i(and)e(the)h(`)p Ft(&>)p Fu(')g(redirection)
+g(op)s(erator,)h(for)f(directing)g(standard)f(output)h(and)330
+2399 y(standard)30 b(error)g(to)h(the)f(same)h(\014le)f(\(see)i
+(Section)f(3.6)g([Redirections],)h(page)g(35\).)225 2527
+y Fq(\017)60 b Fu(Bash)21 b(includes)f(the)h(`)p Ft(<<<)p
+Fu(')g(redirection)g(op)s(erator,)i(allo)m(wing)g(a)e(string)f(to)i(b)s
+(e)e(used)g(as)h(the)g(standard)330 2637 y(input)29 b(to)j(a)e
+(command.)225 2765 y Fq(\017)60 b Fu(Bash)32 b(implemen)m(ts)f(the)h(`)
+p Ft([n]<&)p Fj(word)p Fu(')d(and)i(`)p Ft([n]>&)p Fj(word)p
+Fu(')e(redirection)j(op)s(erators,)g(whic)m(h)f(mo)m(v)m(e)330
+2874 y(one)g(\014le)f(descriptor)g(to)h(another.)225
+3002 y Fq(\017)60 b Fu(Bash)25 b(treats)h(a)f(n)m(um)m(b)s(er)e(of)i
+(\014lenames)g(sp)s(ecially)g(when)f(they)h(are)g(used)f(in)g
+(redirection)i(op)s(erators)330 3112 y(\(see)31 b(Section)h(3.6)f
+([Redirections],)h(page)f(35\).)225 3240 y Fq(\017)60
+b Fu(Bash)33 b(can)f(op)s(en)g(net)m(w)m(ork)i(connections)f(to)h
+(arbitrary)e(mac)m(hines)h(and)f(services)h(with)f(the)h(redi-)330
+3349 y(rection)e(op)s(erators)g(\(see)g(Section)g(3.6)h
+([Redirections],)g(page)f(35\).)225 3477 y Fq(\017)60
+b Fu(The)29 b Ft(noclobber)e Fu(option)j(is)g(a)m(v)-5
+b(ailable)32 b(to)e(a)m(v)m(oid)h(o)m(v)m(erwriting)g(existing)g
+(\014les)e(with)h(output)f(redi-)330 3587 y(rection)39
+b(\(see)h(Section)f(4.3.1)h([The)e(Set)h(Builtin],)i(page)e(62\).)66
+b(The)38 b(`)p Ft(>|)p Fu(')h(redirection)g(op)s(erator)330
+3696 y(ma)m(y)31 b(b)s(e)f(used)f(to)i(o)m(v)m(erride)h
+Ft(noclobber)p Fu(.)225 3824 y Fq(\017)60 b Fu(The)34
+b(Bash)g Ft(cd)g Fu(and)f Ft(pwd)g Fu(builtins)h(\(see)h(Section)g(4.1)
+g([Bourne)g(Shell)f(Builtins],)h(page)g(44\))h(eac)m(h)330
+3934 y(tak)m(e)c Ft(-L)e Fu(and)f Ft(-P)h Fu(options)h(to)g(switc)m(h)g
+(b)s(et)m(w)m(een)g(logical)i(and)c(ph)m(ysical)i(mo)s(des.)225
+4061 y Fq(\017)60 b Fu(Bash)25 b(allo)m(ws)h(a)g(function)e(to)i(o)m(v)
+m(erride)g(a)g(builtin)e(with)h(the)g(same)g(name,)i(and)d(pro)m(vides)
+h(access)h(to)330 4171 y(that)34 b(builtin's)f(functionalit)m(y)h
+(within)f(the)g(function)g(via)h(the)f Ft(builtin)f Fu(and)g
+Ft(command)g Fu(builtins)330 4281 y(\(see)f(Section)h(4.2)f([Bash)g
+(Builtins],)g(page)g(51\).)225 4408 y Fq(\017)60 b Fu(The)35
+b Ft(command)e Fu(builtin)i(allo)m(ws)i(selectiv)m(e)h(disabling)e(of)f
+(functions)g(when)g(command)g(lo)s(okup)g(is)330 4518
+y(p)s(erformed)29 b(\(see)i(Section)g(4.2)h([Bash)f(Builtins],)g(page)g
+(51\).)225 4646 y Fq(\017)60 b Fu(Individual)23 b(builtins)g(ma)m(y)i
+(b)s(e)e(enabled)h(or)g(disabled)g(using)f(the)h Ft(enable)f
+Fu(builtin)g(\(see)i(Section)g(4.2)330 4756 y([Bash)31
+b(Builtins],)g(page)g(51\).)225 4883 y Fq(\017)60 b Fu(The)26
+b(Bash)h Ft(exec)e Fu(builtin)h(tak)m(es)i(additional)f(options)g(that)
+g(allo)m(w)h(users)d(to)j(con)m(trol)g(the)e(con)m(ten)m(ts)330
+4993 y(of)35 b(the)f(en)m(vironmen)m(t)h(passed)f(to)h(the)g(executed)g
+(command,)h(and)d(what)i(the)f(zeroth)h(argumen)m(t)330
+5103 y(to)c(the)g(command)f(is)g(to)h(b)s(e)f(\(see)h(Section)h(4.1)f
+([Bourne)f(Shell)h(Builtins],)g(page)g(44\).)225 5230
+y Fq(\017)60 b Fu(Shell)29 b(functions)g(ma)m(y)h(b)s(e)f(exp)s(orted)g
+(to)h(c)m(hildren)f(via)h(the)g(en)m(vironmen)m(t)g(using)f
+Ft(export)f(-f)h Fu(\(see)330 5340 y(Section)i(3.3)h([Shell)e(F)-8
+b(unctions],)32 b(page)f(18\).)p eop end
+%%Page: 164 170
+TeXDict begin 164 169 bop 150 -116 a Fu(App)s(endix)29
+b(B:)i(Ma)5 b(jor)31 b(Di\013erences)g(F)-8 b(rom)31
+b(The)f(Bourne)g(Shell)1258 b(164)225 299 y Fq(\017)60
+b Fu(The)40 b(Bash)h Ft(export)p Fu(,)h Ft(readonly)p
+Fu(,)f(and)g Ft(declare)d Fu(builtins)j(can)g(tak)m(e)h(a)f
+Ft(-f)f Fu(option)i(to)f(act)h(on)330 408 y(shell)30
+b(functions,)f(a)h Ft(-p)f Fu(option)g(to)i(displa)m(y)e(v)-5
+b(ariables)30 b(with)f(v)-5 b(arious)30 b(attributes)g(set)g(in)f(a)h
+(format)330 518 y(that)g(can)g(b)s(e)f(used)g(as)g(shell)h(input,)f(a)h
+Ft(-n)f Fu(option)h(to)g(remo)m(v)m(e)h(v)-5 b(arious)30
+b(v)-5 b(ariable)30 b(attributes,)h(and)330 628 y(`)p
+Ft(name=value)p Fu(')d(argumen)m(ts)j(to)g(set)g(v)-5
+b(ariable)31 b(attributes)g(and)f(v)-5 b(alues)30 b(sim)m(ultaneously)
+-8 b(.)225 765 y Fq(\017)60 b Fu(The)42 b(Bash)h Ft(hash)f
+Fu(builtin)g(allo)m(ws)j(a)e(name)g(to)g(b)s(e)f(asso)s(ciated)j(with)d
+(an)h(arbitrary)f(\014lename,)330 874 y(ev)m(en)30 b(when)e(that)h
+(\014lename)g(cannot)h(b)s(e)e(found)g(b)m(y)h(searc)m(hing)g(the)g
+Ft($PATH)p Fu(,)g(using)f(`)p Ft(hash)h(-p)p Fu(')g(\(see)330
+984 y(Section)i(4.1)h([Bourne)e(Shell)g(Builtins],)h(page)h(44\).)225
+1121 y Fq(\017)60 b Fu(Bash)27 b(includes)f(a)i Ft(help)d
+Fu(builtin)i(for)f(quic)m(k)h(reference)h(to)f(shell)g(facilities)i
+(\(see)f(Section)g(4.2)g([Bash)330 1230 y(Builtins],)j(page)g(51\).)225
+1367 y Fq(\017)60 b Fu(The)42 b Ft(printf)g Fu(builtin)g(is)h(a)m(v)-5
+b(ailable)45 b(to)f(displa)m(y)f(formatted)g(output)g(\(see)h(Section)g
+(4.2)g([Bash)330 1477 y(Builtins],)31 b(page)g(51\).)225
+1614 y Fq(\017)60 b Fu(The)26 b(Bash)h Ft(read)f Fu(builtin)g(\(see)i
+(Section)g(4.2)g([Bash)f(Builtins],)h(page)g(51\))g(will)f(read)g(a)g
+(line)g(ending)330 1724 y(in)i(`)p Ft(\\)p Fu(')h(with)f(the)g
+Ft(-r)g Fu(option,)i(and)d(will)i(use)f(the)h Ft(REPLY)e
+Fu(v)-5 b(ariable)30 b(as)g(a)f(default)h(if)f(no)h(non-option)330
+1833 y(argumen)m(ts)h(are)h(supplied.)42 b(The)30 b(Bash)i
+Ft(read)e Fu(builtin)g(also)j(accepts)f(a)g(prompt)e(string)h(with)g
+(the)330 1943 y Ft(-p)c Fu(option)h(and)f(will)g(use)h(Readline)g(to)g
+(obtain)g(the)g(line)f(when)g(giv)m(en)h(the)g Ft(-e)f
+Fu(option.)40 b(The)27 b Ft(read)330 2052 y Fu(builtin)h(also)i(has)e
+(additional)i(options)f(to)g(con)m(trol)h(input:)39 b(the)29
+b Ft(-s)f Fu(option)h(will)g(turn)e(o\013)j(ec)m(hoing)330
+2162 y(of)f(input)f(c)m(haracters)j(as)e(they)g(are)h(read,)f(the)g
+Ft(-t)g Fu(option)g(will)h(allo)m(w)g Ft(read)e Fu(to)i(time)g(out)f
+(if)g(input)330 2271 y(do)s(es)i(not)h(arriv)m(e)g(within)f(a)h(sp)s
+(eci\014ed)f(n)m(um)m(b)s(er)f(of)i(seconds,)g(the)f
+Ft(-n)g Fu(option)h(will)g(allo)m(w)h(reading)330 2381
+y(only)38 b(a)g(sp)s(eci\014ed)f(n)m(um)m(b)s(er)f(of)i(c)m(haracters)h
+(rather)e(than)g(a)h(full)g(line,)i(and)d(the)h Ft(-d)f
+Fu(option)h(will)330 2491 y(read)30 b(un)m(til)h(a)g(particular)f(c)m
+(haracter)i(rather)f(than)f(newline.)225 2628 y Fq(\017)60
+b Fu(The)33 b Ft(return)e Fu(builtin)i(ma)m(y)g(b)s(e)g(used)f(to)i(ab)
+s(ort)f(execution)h(of)f(scripts)g(executed)h(with)f(the)g
+Ft(.)g Fu(or)330 2737 y Ft(source)c Fu(builtins)g(\(see)j(Section)f
+(4.1)g([Bourne)g(Shell)f(Builtins],)h(page)g(44\).)225
+2874 y Fq(\017)60 b Fu(Bash)43 b(includes)g(the)g Ft(shopt)f
+Fu(builtin,)k(for)d(\014ner)f(con)m(trol)j(of)e(shell)h(optional)g
+(capabilities)h(\(see)330 2984 y(Section)c(4.3.2)g([The)f(Shopt)f
+(Builtin],)k(page)d(66\),)k(and)39 b(allo)m(ws)i(these)f(options)h(to)f
+(b)s(e)f(set)i(and)330 3093 y(unset)30 b(at)h(shell)g(in)m(v)m(o)s
+(cation)h(\(see)f(Section)h(6.1)f([In)m(v)m(oking)g(Bash],)g(page)h
+(86\).)225 3230 y Fq(\017)60 b Fu(Bash)45 b(has)f(m)m(uc)m(h)g(more)h
+(optional)h(b)s(eha)m(vior)e(con)m(trollable)j(with)e(the)f
+Ft(set)g Fu(builtin)g(\(see)h(Sec-)330 3340 y(tion)31
+b(4.3.1)h([The)e(Set)h(Builtin],)g(page)g(62\).)225 3477
+y Fq(\017)60 b Fu(The)31 b(`)p Ft(-x)p Fu(')g(\()p Ft(xtrace)p
+Fu(\))g(option)h(displa)m(ys)f(commands)h(other)f(than)h(simple)f
+(commands)g(when)g(p)s(er-)330 3587 y(forming)f(an)g(execution)i(trace)
+f(\(see)h(Section)f(4.3.1)h([The)e(Set)h(Builtin],)g(page)g(62\).)225
+3724 y Fq(\017)60 b Fu(The)28 b Ft(test)g Fu(builtin)h(\(see)h(Section)
+f(4.1)h([Bourne)f(Shell)g(Builtins],)h(page)g(44\))g(is)f(sligh)m(tly)h
+(di\013eren)m(t,)330 3833 y(as)23 b(it)g(implemen)m(ts)f(the)h
+Fm(posix)f Fu(algorithm,)j(whic)m(h)d(sp)s(eci\014es)g(the)h(b)s(eha)m
+(vior)f(based)g(on)h(the)f(n)m(um)m(b)s(er)330 3943 y(of)31
+b(argumen)m(ts.)225 4080 y Fq(\017)60 b Fu(Bash)31 b(includes)g(the)h
+Ft(caller)d Fu(builtin,)j(whic)m(h)f(displa)m(ys)g(the)g(con)m(text)i
+(of)f(an)m(y)g(activ)m(e)h(subroutine)330 4189 y(call)28
+b(\(a)f(shell)f(function)h(or)f(a)h(script)f(executed)h(with)f(the)h
+Ft(.)f Fu(or)g Ft(source)f Fu(builtins\).)39 b(This)26
+b(supp)s(orts)330 4299 y(the)31 b(bash)e(debugger.)225
+4436 y Fq(\017)60 b Fu(The)42 b Ft(trap)f Fu(builtin)h(\(see)i(Section)
+f(4.1)h([Bourne)e(Shell)g(Builtins],)47 b(page)c(44\))h(allo)m(ws)g(a)e
+Ft(DEBUG)330 4545 y Fu(pseudo-signal)c(sp)s(eci\014cation,)i(similar)e
+(to)g Ft(EXIT)p Fu(.)62 b(Commands)36 b(sp)s(eci\014ed)h(with)g(a)h
+Ft(DEBUG)e Fu(trap)330 4655 y(are)k(executed)g(b)s(efore)f(ev)m(ery)h
+(simple)f(command,)j Ft(for)c Fu(command,)k Ft(case)c
+Fu(command,)k Ft(select)330 4765 y Fu(command,)35 b(ev)m(ery)g
+(arithmetic)g Ft(for)e Fu(command,)i(and)f(b)s(efore)g(the)g(\014rst)f
+(command)h(executes)h(in)330 4874 y(a)29 b(shell)g(function.)40
+b(The)28 b Ft(DEBUG)g Fu(trap)g(is)h(not)g(inherited)f(b)m(y)h(shell)g
+(functions)f(unless)g(the)h(function)330 4984 y(has)35
+b(b)s(een)g(giv)m(en)i(the)f Ft(trace)e Fu(attribute)i(or)g(the)g
+Ft(functrace)d Fu(option)j(has)f(b)s(een)g(enabled)g(using)330
+5093 y(the)28 b Ft(shopt)e Fu(builtin.)39 b(The)27 b
+Ft(extdebug)f Fu(shell)i(option)g(has)f(additional)h(e\013ects)h(on)f
+(the)g Ft(DEBUG)e Fu(trap.)330 5230 y(The)21 b Ft(trap)e
+Fu(builtin)i(\(see)h(Section)g(4.1)g([Bourne)f(Shell)g(Builtins],)j
+(page)e(44\))g(allo)m(ws)g(an)f Ft(ERR)f Fu(pseudo-)330
+5340 y(signal)30 b(sp)s(eci\014cation,)h(similar)f(to)g
+Ft(EXIT)f Fu(and)g Ft(DEBUG)p Fu(.)39 b(Commands)28 b(sp)s(eci\014ed)h
+(with)g(an)g Ft(ERR)g Fu(trap)p eop end
+%%Page: 165 171
+TeXDict begin 165 170 bop 150 -116 a Fu(App)s(endix)29
+b(B:)i(Ma)5 b(jor)31 b(Di\013erences)g(F)-8 b(rom)31
+b(The)f(Bourne)g(Shell)1258 b(165)330 299 y(are)40 b(executed)g(after)g
+(a)f(simple)h(command)f(fails,)j(with)d(a)h(few)f(exceptions.)68
+b(The)39 b Ft(ERR)g Fu(trap)g(is)330 408 y(not)g(inherited)f(b)m(y)h
+(shell)g(functions)f(unless)g(the)h Ft(-o)29 b(errtrace)37
+b Fu(option)i(to)g(the)g Ft(set)f Fu(builtin)g(is)330
+518 y(enabled.)330 650 y(The)g Ft(trap)g Fu(builtin)h(\(see)g(Section)h
+(4.1)g([Bourne)f(Shell)g(Builtins],)i(page)f(44\))g(allo)m(ws)g(a)g
+Ft(RETURN)330 759 y Fu(pseudo-signal)35 b(sp)s(eci\014cation,)j
+(similar)d(to)h Ft(EXIT)e Fu(and)g Ft(DEBUG)p Fu(.)54
+b(Commands)34 b(sp)s(eci\014ed)g(with)h(an)330 869 y
+Ft(RETURN)k Fu(trap)i(are)g(executed)h(b)s(efore)e(execution)i(resumes)
+e(after)h(a)g(shell)g(function)g(or)g(a)g(shell)330 978
+y(script)36 b(executed)g(with)g Ft(.)f Fu(or)h Ft(source)e
+Fu(returns.)56 b(The)35 b Ft(RETURN)f Fu(trap)i(is)g(not)g(inherited)f
+(b)m(y)h(shell)330 1088 y(functions)k(unless)h(the)g(function)f(has)h
+(b)s(een)f(giv)m(en)i(the)f Ft(trace)e Fu(attribute)j(or)e(the)h
+Ft(functrace)330 1198 y Fu(option)31 b(has)f(b)s(een)g(enabled)g(using)
+g(the)g Ft(shopt)f Fu(builtin.)225 1329 y Fq(\017)60
+b Fu(The)30 b(Bash)g Ft(type)f Fu(builtin)h(is)g(more)g(extensiv)m(e)i
+(and)d(giv)m(es)j(more)e(information)h(ab)s(out)f(the)g(names)330
+1439 y(it)h(\014nds)e(\(see)i(Section)g(4.2)h([Bash)e(Builtins],)i
+(page)f(51\).)225 1570 y Fq(\017)60 b Fu(The)27 b(Bash)h
+Ft(umask)e Fu(builtin)h(p)s(ermits)g(a)h Ft(-p)f Fu(option)h(to)h
+(cause)f(the)g(output)f(to)h(b)s(e)f(displa)m(y)m(ed)h(in)g(the)330
+1680 y(form)i(of)h(a)g Ft(umask)f Fu(command)g(that)i(ma)m(y)f(b)s(e)f
+(reused)g(as)h(input)f(\(see)i(Section)f(4.1)h([Bourne)f(Shell)330
+1789 y(Builtins],)g(page)g(44\).)225 1921 y Fq(\017)60
+b Fu(Bash)34 b(implemen)m(ts)h(a)g Ft(csh)p Fu(-lik)m(e)g(directory)f
+(stac)m(k,)j(and)d(pro)m(vides)g(the)g Ft(pushd)p Fu(,)g
+Ft(popd)p Fu(,)g(and)g Ft(dirs)330 2030 y Fu(builtins)g(to)i
+(manipulate)f(it)h(\(see)f(Section)h(6.8)g([The)f(Directory)h(Stac)m
+(k],)i(page)d(97\).)56 b(Bash)35 b(also)330 2140 y(mak)m(es)c(the)g
+(directory)g(stac)m(k)g(visible)g(as)g(the)f(v)-5 b(alue)31
+b(of)g(the)f Ft(DIRSTACK)f Fu(shell)h(v)-5 b(ariable.)225
+2272 y Fq(\017)60 b Fu(Bash)28 b(in)m(terprets)h(sp)s(ecial)g(bac)m
+(kslash-escap)s(ed)g(c)m(haracters)g(in)f(the)h(prompt)e(strings)h
+(when)f(in)m(ter-)330 2381 y(activ)m(e)33 b(\(see)e(Section)g(6.9)h
+([Con)m(trolling)f(the)g(Prompt],)f(page)h(98\).)225
+2513 y Fq(\017)60 b Fu(The)46 b(Bash)h(restricted)g(mo)s(de)f(is)h
+(more)f(useful)g(\(see)h(Section)h(6.10)g([The)e(Restricted)i(Shell],)
+330 2622 y(page)31 b(100\);)h(the)f(SVR4.2)g(shell)g(restricted)g(mo)s
+(de)f(is)g(to)s(o)h(limited.)225 2754 y Fq(\017)60 b
+Fu(The)30 b Ft(disown)f Fu(builtin)h(can)h(remo)m(v)m(e)h(a)f(job)f
+(from)g(the)h(in)m(ternal)g(shell)g(job)f(table)i(\(see)f(Section)h
+(7.2)330 2863 y([Job)e(Con)m(trol)h(Builtins],)g(page)g(108\))g(or)g
+(suppress)d(the)i(sending)g(of)g Ft(SIGHUP)e Fu(to)j(a)g(job)f(when)f
+(the)330 2973 y(shell)i(exits)g(as)f(the)h(result)f(of)h(a)f
+Ft(SIGHUP)p Fu(.)225 3104 y Fq(\017)60 b Fu(Bash)31 b(includes)f(a)g(n)
+m(um)m(b)s(er)f(of)i(features)g(to)g(supp)s(ort)d(a)j(separate)g
+(debugger)f(for)h(shell)f(scripts.)225 3236 y Fq(\017)60
+b Fu(The)28 b(SVR4.2)h(shell)f(has)g(t)m(w)m(o)i(privilege-related)g
+(builtins)e(\()p Ft(mldmode)e Fu(and)i Ft(priv)p Fu(\))f(not)i(presen)m
+(t)f(in)330 3346 y(Bash.)225 3477 y Fq(\017)60 b Fu(Bash)31
+b(do)s(es)f(not)g(ha)m(v)m(e)i(the)e Ft(stop)g Fu(or)g
+Ft(newgrp)f Fu(builtins.)225 3609 y Fq(\017)60 b Fu(Bash)31
+b(do)s(es)f(not)g(use)g(the)h Ft(SHACCT)d Fu(v)-5 b(ariable)32
+b(or)e(p)s(erform)f(shell)i(accoun)m(ting.)225 3740 y
+Fq(\017)60 b Fu(The)30 b(SVR4.2)h Ft(sh)f Fu(uses)g(a)g
+Ft(TIMEOUT)f Fu(v)-5 b(ariable)31 b(lik)m(e)h(Bash)e(uses)g
+Ft(TMOUT)p Fu(.)150 3894 y(More)h(features)g(unique)e(to)i(Bash)g(ma)m
+(y)g(b)s(e)f(found)f(in)h(Chapter)f(6)i([Bash)g(F)-8
+b(eatures],)32 b(page)f(86.)150 4128 y Fs(B.1)67 b(Implemen)l(tation)48
+b(Di\013erences)e(F)-11 b(rom)44 b(The)h(SVR4.2)g(Shell)150
+4288 y Fu(Since)33 b(Bash)h(is)f(a)g(completely)i(new)e(implemen)m
+(tation,)j(it)e(do)s(es)e(not)i(su\013er)e(from)h(man)m(y)g(of)h(the)f
+(limi-)150 4397 y(tations)f(of)e(the)h(SVR4.2)g(shell.)41
+b(F)-8 b(or)31 b(instance:)225 4529 y Fq(\017)60 b Fu(Bash)32
+b(do)s(es)f(not)h(fork)f(a)h(subshell)e(when)h(redirecting)h(in)m(to)h
+(or)e(out)h(of)g(a)g(shell)f(con)m(trol)i(structure)330
+4639 y(suc)m(h)d(as)h(an)f Ft(if)g Fu(or)g Ft(while)f
+Fu(statemen)m(t.)225 4770 y Fq(\017)60 b Fu(Bash)29 b(do)s(es)f(not)h
+(allo)m(w)h(un)m(balanced)f(quotes.)41 b(The)28 b(SVR4.2)h(shell)g
+(will)g(silen)m(tly)i(insert)d(a)h(needed)330 4880 y(closing)g(quote)g
+(at)f Ft(EOF)f Fu(under)g(certain)h(circumstances.)41
+b(This)27 b(can)h(b)s(e)g(the)g(cause)g(of)g(some)h(hard-)330
+4989 y(to-\014nd)h(errors.)225 5121 y Fq(\017)60 b Fu(The)45
+b(SVR4.2)h(shell)f(uses)g(a)g(baro)s(que)g(memory)g(managemen)m(t)i(sc)
+m(heme)e(based)g(on)g(trapping)330 5230 y Ft(SIGSEGV)p
+Fu(.)57 b(If)35 b(the)i(shell)f(is)h(started)g(from)e(a)i(pro)s(cess)f
+(with)g Ft(SIGSEGV)e Fu(blo)s(c)m(k)m(ed)k(\(e.g.,)h(b)m(y)d(using)330
+5340 y(the)31 b Ft(system\(\))d Fu(C)i(library)g(function)g(call\),)i
+(it)f(misb)s(eha)m(v)m(es)g(badly)-8 b(.)p eop end
+%%Page: 166 172
+TeXDict begin 166 171 bop 150 -116 a Fu(App)s(endix)29
+b(B:)i(Ma)5 b(jor)31 b(Di\013erences)g(F)-8 b(rom)31
+b(The)f(Bourne)g(Shell)1258 b(166)225 299 y Fq(\017)60
+b Fu(In)30 b(a)i(questionable)g(attempt)g(at)g(securit)m(y)-8
+b(,)33 b(the)e(SVR4.2)h(shell,)g(when)e(in)m(v)m(ok)m(ed)j(without)e
+(the)h Ft(-p)330 408 y Fu(option,)39 b(will)d(alter)i(its)e(real)h(and)
+f(e\013ectiv)m(e)j Fm(uid)d Fu(and)g Fm(gid)h Fu(if)f(they)h(are)f
+(less)h(than)f(some)h(magic)330 518 y(threshold)30 b(v)-5
+b(alue,)31 b(commonly)g(100.)42 b(This)29 b(can)i(lead)g(to)g(unexp)s
+(ected)f(results.)225 653 y Fq(\017)60 b Fu(The)30 b(SVR4.2)h(shell)g
+(do)s(es)f(not)g(allo)m(w)i(users)e(to)h(trap)f Ft(SIGSEGV)p
+Fu(,)f Ft(SIGALRM)p Fu(,)f(or)j Ft(SIGCHLD)p Fu(.)225
+787 y Fq(\017)60 b Fu(The)34 b(SVR4.2)h(shell)g(do)s(es)g(not)f(allo)m
+(w)j(the)d Ft(IFS)p Fu(,)h Ft(MAILCHECK)p Fu(,)f Ft(PATH)p
+Fu(,)h Ft(PS1)p Fu(,)g(or)f Ft(PS2)g Fu(v)-5 b(ariables)35
+b(to)330 897 y(b)s(e)30 b(unset.)225 1031 y Fq(\017)60
+b Fu(The)30 b(SVR4.2)h(shell)g(treats)g(`)p Ft(^)p Fu(')f(as)h(the)g
+(undo)s(cumen)m(ted)e(equiv)-5 b(alen)m(t)31 b(of)g(`)p
+Ft(|)p Fu('.)225 1166 y Fq(\017)60 b Fu(Bash)37 b(allo)m(ws)h(m)m
+(ultiple)f(option)g(argumen)m(ts)g(when)e(it)i(is)g(in)m(v)m(ok)m(ed)h
+(\()p Ft(-x)30 b(-v)p Fu(\);)40 b(the)c(SVR4.2)i(shell)330
+1275 y(allo)m(ws)c(only)f(one)g(option)g(argumen)m(t)g(\()p
+Ft(-xv)p Fu(\).)47 b(In)32 b(fact,)i(some)f(v)m(ersions)g(of)g(the)g
+(shell)f(dump)f(core)330 1385 y(if)f(the)h(second)f(argumen)m(t)h(b)s
+(egins)f(with)g(a)h(`)p Ft(-)p Fu('.)225 1519 y Fq(\017)60
+b Fu(The)26 b(SVR4.2)i(shell)f(exits)g(a)g(script)g(if)g(an)m(y)g
+(builtin)f(fails;)j(Bash)e(exits)g(a)g(script)g(only)g(if)g(one)g(of)g
+(the)330 1629 y Fm(posix)34 b Fu(sp)s(ecial)h(builtins)f(fails,)i(and)e
+(only)h(for)f(certain)h(failures,)h(as)f(en)m(umerated)g(in)f(the)h
+Fm(posix)330 1738 y Fu(standard.)225 1873 y Fq(\017)60
+b Fu(The)30 b(SVR4.2)h(shell)g(b)s(eha)m(v)m(es)f(di\013eren)m(tly)h
+(when)f(in)m(v)m(ok)m(ed)i(as)e Ft(jsh)g Fu(\(it)h(turns)e(on)h(job)g
+(con)m(trol\).)p eop end
+%%Page: 167 173
+TeXDict begin 167 172 bop 3614 -116 a Fu(167)150 299
+y Fp(App)t(endix)52 b(C)81 b(GNU)54 b(F)-13 b(ree)53
+b(Do)t(cumen)l(tation)e(License)1359 502 y Fu(V)-8 b(ersion)31
+b(1.3,)g(3)g(No)m(v)m(em)m(b)s(er)h(2008)390 635 y(Cop)m(yrigh)m(t)842
+632 y(c)817 635 y Fq(\015)e Fu(2000,)j(2001,)f(2002,)g(2007,)h(2008)f
+(F)-8 b(ree)31 b(Soft)m(w)m(are)h(F)-8 b(oundation,)31
+b(Inc.)390 745 y Ft(http://fsf.org/)390 964 y Fu(Ev)m(ery)m(one)g(is)g
+(p)s(ermitted)f(to)h(cop)m(y)g(and)f(distribute)g(v)m(erbatim)h(copies)
+390 1074 y(of)g(this)f(license)h(do)s(cumen)m(t,)g(but)e(c)m(hanging)j
+(it)f(is)f(not)h(allo)m(w)m(ed.)199 1207 y(0.)61 b(PREAMBLE)330
+1340 y(The)37 b(purp)s(ose)e(of)i(this)g(License)h(is)f(to)h(mak)m(e)g
+(a)g(man)m(ual,)h(textb)s(o)s(ok,)h(or)d(other)g(functional)h(and)330
+1450 y(useful)29 b(do)s(cumen)m(t)h Fr(free)36 b Fu(in)29
+b(the)i(sense)f(of)g(freedom:)41 b(to)31 b(assure)e(ev)m(ery)m(one)j
+(the)e(e\013ectiv)m(e)j(freedom)330 1559 y(to)f(cop)m(y)g(and)f
+(redistribute)g(it,)h(with)g(or)f(without)g(mo)s(difying)g(it,)i
+(either)f(commercially)h(or)e(non-)330 1669 y(commercially)-8
+b(.)56 b(Secondarily)-8 b(,)36 b(this)f(License)g(preserv)m(es)g(for)f
+(the)h(author)f(and)g(publisher)f(a)i(w)m(a)m(y)330 1778
+y(to)i(get)g(credit)g(for)f(their)g(w)m(ork,)i(while)e(not)g(b)s(eing)g
+(considered)g(resp)s(onsible)f(for)h(mo)s(di\014cations)330
+1888 y(made)30 b(b)m(y)h(others.)330 2021 y(This)22 b(License)i(is)f(a)
+h(kind)e(of)i(\\cop)m(yleft",)j(whic)m(h)c(means)g(that)h(deriv)-5
+b(ativ)m(e)24 b(w)m(orks)f(of)h(the)f(do)s(cumen)m(t)330
+2131 y(m)m(ust)34 b(themselv)m(es)h(b)s(e)e(free)h(in)g(the)g(same)g
+(sense.)51 b(It)34 b(complemen)m(ts)h(the)f(GNU)g(General)h(Public)330
+2240 y(License,)c(whic)m(h)f(is)h(a)f(cop)m(yleft)i(license)g(designed)
+e(for)g(free)h(soft)m(w)m(are.)330 2373 y(W)-8 b(e)31
+b(ha)m(v)m(e)f(designed)g(this)f(License)h(in)f(order)g(to)i(use)e(it)h
+(for)f(man)m(uals)h(for)f(free)h(soft)m(w)m(are,)h(b)s(ecause)330
+2483 y(free)42 b(soft)m(w)m(are)i(needs)e(free)g(do)s(cumen)m(tation:)
+65 b(a)42 b(free)h(program)f(should)f(come)i(with)f(man)m(uals)330
+2592 y(pro)m(viding)29 b(the)g(same)g(freedoms)f(that)i(the)f(soft)m(w)
+m(are)h(do)s(es.)40 b(But)29 b(this)f(License)i(is)f(not)g(limited)g
+(to)330 2702 y(soft)m(w)m(are)j(man)m(uals;)f(it)g(can)g(b)s(e)f(used)g
+(for)g(an)m(y)h(textual)h(w)m(ork,)f(regardless)g(of)g(sub)5
+b(ject)30 b(matter)i(or)330 2812 y(whether)f(it)h(is)f(published)f(as)i
+(a)f(prin)m(ted)g(b)s(o)s(ok.)44 b(W)-8 b(e)32 b(recommend)f(this)h
+(License)g(principally)f(for)330 2921 y(w)m(orks)f(whose)h(purp)s(ose)d
+(is)j(instruction)f(or)g(reference.)199 3054 y(1.)61
+b(APPLICABILITY)29 b(AND)j(DEFINITIONS)330 3187 y(This)39
+b(License)i(applies)f(to)g(an)m(y)h(man)m(ual)f(or)g(other)g(w)m(ork,)i
+(in)e(an)m(y)g(medium,)i(that)e(con)m(tains)i(a)330 3297
+y(notice)h(placed)f(b)m(y)f(the)h(cop)m(yrigh)m(t)h(holder)e(sa)m(ying)
+h(it)g(can)g(b)s(e)f(distributed)f(under)g(the)i(terms)330
+3407 y(of)c(this)f(License.)62 b(Suc)m(h)37 b(a)h(notice)h(gran)m(ts)f
+(a)g(w)m(orld-wide,)h(ro)m(y)m(alt)m(y-free)i(license,)f(unlimited)d
+(in)330 3516 y(duration,)49 b(to)d(use)f(that)g(w)m(ork)h(under)d(the)j
+(conditions)f(stated)h(herein.)85 b(The)45 b(\\Do)s(cumen)m(t",)330
+3626 y(b)s(elo)m(w,)29 b(refers)f(to)h(an)m(y)g(suc)m(h)f(man)m(ual)h
+(or)f(w)m(ork.)40 b(An)m(y)29 b(mem)m(b)s(er)e(of)i(the)f(public)g(is)g
+(a)h(licensee,)i(and)330 3735 y(is)25 b(addressed)f(as)h(\\y)m(ou".)40
+b(Y)-8 b(ou)26 b(accept)g(the)f(license)h(if)f(y)m(ou)h(cop)m(y)-8
+b(,)27 b(mo)s(dify)d(or)h(distribute)g(the)g(w)m(ork)330
+3845 y(in)30 b(a)h(w)m(a)m(y)g(requiring)f(p)s(ermission)f(under)g(cop)
+m(yrigh)m(t)j(la)m(w.)330 3978 y(A)i(\\Mo)s(di\014ed)f(V)-8
+b(ersion")35 b(of)f(the)g(Do)s(cumen)m(t)g(means)g(an)m(y)g(w)m(ork)f
+(con)m(taining)j(the)e(Do)s(cumen)m(t)g(or)330 4088 y(a)k(p)s(ortion)f
+(of)h(it,)i(either)e(copied)g(v)m(erbatim,)i(or)d(with)h(mo)s
+(di\014cations)f(and/or)h(translated)g(in)m(to)330 4197
+y(another)31 b(language.)330 4330 y(A)26 b(\\Secondary)g(Section")h(is)
+f(a)h(named)e(app)s(endix)f(or)i(a)h(fron)m(t-matter)g(section)g(of)f
+(the)g(Do)s(cumen)m(t)330 4440 y(that)c(deals)g(exclusiv)m(ely)h(with)e
+(the)g(relationship)h(of)f(the)h(publishers)d(or)i(authors)g(of)h(the)f
+(Do)s(cumen)m(t)330 4549 y(to)38 b(the)f(Do)s(cumen)m(t's)i(o)m(v)m
+(erall)g(sub)5 b(ject)37 b(\(or)h(to)g(related)g(matters\))g(and)f(con)
+m(tains)h(nothing)f(that)330 4659 y(could)j(fall)h(directly)g(within)f
+(that)h(o)m(v)m(erall)i(sub)5 b(ject.)70 b(\(Th)m(us,)42
+b(if)e(the)h(Do)s(cumen)m(t)g(is)f(in)g(part)h(a)330
+4769 y(textb)s(o)s(ok)24 b(of)g(mathematics,)j(a)d(Secondary)f(Section)
+h(ma)m(y)g(not)g(explain)g(an)m(y)g(mathematics.\))40
+b(The)330 4878 y(relationship)28 b(could)f(b)s(e)g(a)g(matter)i(of)e
+(historical)i(connection)f(with)f(the)h(sub)5 b(ject)27
+b(or)g(with)g(related)330 4988 y(matters,)38 b(or)d(of)h(legal,)i
+(commercial,)h(philosophical,)f(ethical)f(or)e(p)s(olitical)i(p)s
+(osition)f(regarding)330 5097 y(them.)330 5230 y(The)25
+b(\\In)m(v)-5 b(arian)m(t)27 b(Sections")g(are)f(certain)g(Secondary)g
+(Sections)g(whose)f(titles)i(are)f(designated,)i(as)330
+5340 y(b)s(eing)e(those)h(of)g(In)m(v)-5 b(arian)m(t)27
+b(Sections,)i(in)d(the)h(notice)h(that)f(sa)m(ys)g(that)g(the)g(Do)s
+(cumen)m(t)g(is)g(released)p eop end
+%%Page: 168 174
+TeXDict begin 168 173 bop 150 -116 a Fu(App)s(endix)29
+b(C:)h(GNU)h(F)-8 b(ree)31 b(Do)s(cumen)m(tation)i(License)1560
+b(168)330 299 y(under)26 b(this)i(License.)40 b(If)27
+b(a)h(section)h(do)s(es)f(not)f(\014t)h(the)g(ab)s(o)m(v)m(e)h
+(de\014nition)e(of)h(Secondary)f(then)h(it)g(is)330 408
+y(not)k(allo)m(w)m(ed)i(to)e(b)s(e)g(designated)g(as)g(In)m(v)-5
+b(arian)m(t.)46 b(The)31 b(Do)s(cumen)m(t)i(ma)m(y)f(con)m(tain)i(zero)
+e(In)m(v)-5 b(arian)m(t)330 518 y(Sections.)39 b(If)25
+b(the)f(Do)s(cumen)m(t)i(do)s(es)e(not)h(iden)m(tify)g(an)m(y)g(In)m(v)
+-5 b(arian)m(t)25 b(Sections)h(then)e(there)h(are)g(none.)330
+669 y(The)36 b(\\Co)m(v)m(er)i(T)-8 b(exts")38 b(are)f(certain)g(short)
+g(passages)g(of)g(text)g(that)h(are)f(listed,)i(as)d(F)-8
+b(ron)m(t-Co)m(v)m(er)330 778 y(T)g(exts)26 b(or)f(Bac)m(k-Co)m(v)m(er)
+j(T)-8 b(exts,)27 b(in)d(the)h(notice)i(that)e(sa)m(ys)h(that)g(the)f
+(Do)s(cumen)m(t)h(is)f(released)g(under)330 888 y(this)h(License.)40
+b(A)25 b(F)-8 b(ron)m(t-Co)m(v)m(er)29 b(T)-8 b(ext)26
+b(ma)m(y)h(b)s(e)e(at)i(most)f(5)g(w)m(ords,)g(and)g(a)g(Bac)m(k-Co)m
+(v)m(er)j(T)-8 b(ext)26 b(ma)m(y)330 998 y(b)s(e)k(at)h(most)g(25)g(w)m
+(ords.)330 1148 y(A)36 b(\\T)-8 b(ransparen)m(t")36 b(cop)m(y)g(of)g
+(the)f(Do)s(cumen)m(t)h(means)g(a)g(mac)m(hine-readable)h(cop)m(y)-8
+b(,)38 b(represen)m(ted)330 1258 y(in)d(a)h(format)g(whose)g(sp)s
+(eci\014cation)g(is)g(a)m(v)-5 b(ailable)38 b(to)f(the)f(general)g
+(public,)h(that)f(is)g(suitable)g(for)330 1367 y(revising)c(the)g(do)s
+(cumen)m(t)f(straigh)m(tforw)m(ardly)i(with)e(generic)i(text)g(editors)
+f(or)f(\(for)h(images)h(com-)330 1477 y(p)s(osed)23 b(of)h(pixels\))g
+(generic)h(pain)m(t)f(programs)g(or)f(\(for)h(dra)m(wings\))g(some)g
+(widely)g(a)m(v)-5 b(ailable)26 b(dra)m(wing)330 1587
+y(editor,)k(and)f(that)g(is)g(suitable)h(for)f(input)f(to)i(text)g
+(formatters)f(or)g(for)g(automatic)i(translation)f(to)330
+1696 y(a)d(v)-5 b(ariet)m(y)28 b(of)f(formats)g(suitable)h(for)e(input)
+g(to)i(text)g(formatters.)40 b(A)27 b(cop)m(y)g(made)g(in)g(an)g
+(otherwise)330 1806 y(T)-8 b(ransparen)m(t)37 b(\014le)h(format)g
+(whose)f(markup,)i(or)e(absence)h(of)g(markup,)g(has)g(b)s(een)f
+(arranged)g(to)330 1915 y(th)m(w)m(art)27 b(or)g(discourage)g
+(subsequen)m(t)f(mo)s(di\014cation)h(b)m(y)g(readers)f(is)g(not)h(T)-8
+b(ransparen)m(t.)39 b(An)27 b(image)330 2025 y(format)35
+b(is)f(not)h(T)-8 b(ransparen)m(t)34 b(if)g(used)g(for)g(an)m(y)g
+(substan)m(tial)h(amoun)m(t)g(of)g(text.)53 b(A)35 b(cop)m(y)g(that)g
+(is)330 2134 y(not)c(\\T)-8 b(ransparen)m(t")31 b(is)f(called)i
+(\\Opaque".)330 2285 y(Examples)53 b(of)g(suitable)h(formats)f(for)g(T)
+-8 b(ransparen)m(t)53 b(copies)h(include)f(plain)g Fm(asci)r(i)g
+Fu(without)330 2395 y(markup,)37 b(T)-8 b(exinfo)36 b(input)f(format,)j
+(LaT)1759 2414 y(E)1810 2395 y(X)e(input)f(format,)j
+Ff(SGML)f Fu(or)f Ff(XML)g Fu(using)g(a)g(publicly)330
+2504 y(a)m(v)-5 b(ailable)42 b Ff(DTD)p Fu(,)h(and)c
+(standard-conforming)g(simple)h Ff(HTML)p Fu(,)i(P)m(ostScript)e(or)f
+Ff(PDF)h Fu(designed)330 2614 y(for)e(h)m(uman)f(mo)s(di\014cation.)65
+b(Examples)38 b(of)h(transparen)m(t)f(image)h(formats)g(include)f
+Ff(PNG)p Fu(,)i Ff(X)n(CF)330 2724 y Fu(and)e Ff(JPG)p
+Fu(.)64 b(Opaque)38 b(formats)h(include)f(proprietary)h(formats)f(that)
+h(can)g(b)s(e)f(read)h(and)f(edited)330 2833 y(only)54
+b(b)m(y)f(proprietary)h(w)m(ord)f(pro)s(cessors,)59 b
+Ff(SGML)54 b Fu(or)f Ff(XML)h Fu(for)g(whic)m(h)f(the)h
+Ff(DTD)g Fu(and/or)330 2943 y(pro)s(cessing)61 b(to)s(ols)h(are)f(not)g
+(generally)i(a)m(v)-5 b(ailable,)71 b(and)60 b(the)h(mac)m
+(hine-generated)j Ff(HTML)p Fu(,)330 3052 y(P)m(ostScript)31
+b(or)f Ff(PDF)h Fu(pro)s(duced)d(b)m(y)j(some)f(w)m(ord)g(pro)s
+(cessors)g(for)g(output)g(purp)s(oses)f(only)-8 b(.)330
+3203 y(The)34 b(\\Title)h(P)m(age")i(means,)e(for)f(a)h(prin)m(ted)f(b)
+s(o)s(ok,)h(the)f(title)i(page)f(itself,)h(plus)e(suc)m(h)f(follo)m
+(wing)330 3313 y(pages)28 b(as)g(are)g(needed)g(to)g(hold,)g(legibly)-8
+b(,)30 b(the)e(material)h(this)e(License)i(requires)e(to)h(app)s(ear)f
+(in)h(the)330 3422 y(title)g(page.)40 b(F)-8 b(or)28
+b(w)m(orks)e(in)g(formats)h(whic)m(h)g(do)f(not)h(ha)m(v)m(e)h(an)m(y)e
+(title)j(page)e(as)g(suc)m(h,)g(\\Title)h(P)m(age")330
+3532 y(means)j(the)f(text)i(near)e(the)h(most)g(prominen)m(t)g(app)s
+(earance)f(of)h(the)g(w)m(ork's)g(title,)h(preceding)f(the)330
+3641 y(b)s(eginning)f(of)g(the)h(b)s(o)s(dy)e(of)h(the)h(text.)330
+3792 y(The)j(\\publisher")g(means)h(an)m(y)f(p)s(erson)g(or)h(en)m(tit)
+m(y)h(that)f(distributes)f(copies)i(of)e(the)h(Do)s(cumen)m(t)330
+3902 y(to)c(the)g(public.)330 4052 y(A)f(section)h(\\En)m(titled)g
+(XYZ")f(means)f(a)h(named)g(subunit)e(of)h(the)h(Do)s(cumen)m(t)h
+(whose)e(title)i(either)330 4162 y(is)d(precisely)g(XYZ)g(or)f(con)m
+(tains)i(XYZ)f(in)f(paren)m(theses)i(follo)m(wing)g(text)g(that)f
+(translates)h(XYZ)e(in)330 4271 y(another)e(language.)40
+b(\(Here)26 b(XYZ)f(stands)f(for)h(a)g(sp)s(eci\014c)g(section)h(name)f
+(men)m(tioned)h(b)s(elo)m(w,)g(suc)m(h)330 4381 y(as)i(\\Ac)m(kno)m
+(wledgemen)m(ts",)33 b(\\Dedications",)e(\\Endorsemen)m(ts",)e(or)f
+(\\History".\))42 b(T)-8 b(o)29 b(\\Preserv)m(e)330 4491
+y(the)34 b(Title")h(of)e(suc)m(h)h(a)g(section)g(when)f(y)m(ou)h(mo)s
+(dify)e(the)i(Do)s(cumen)m(t)h(means)e(that)h(it)g(remains)g(a)330
+4600 y(section)e(\\En)m(titled)f(XYZ")g(according)g(to)g(this)g
+(de\014nition.)330 4751 y(The)c(Do)s(cumen)m(t)i(ma)m(y)f(include)f(W)
+-8 b(arran)m(t)m(y)30 b(Disclaimers)f(next)f(to)g(the)g(notice)h(whic)m
+(h)e(states)i(that)330 4861 y(this)34 b(License)g(applies)g(to)h(the)f
+(Do)s(cumen)m(t.)52 b(These)33 b(W)-8 b(arran)m(t)m(y)36
+b(Disclaimers)f(are)g(considered)e(to)330 4970 y(b)s(e)k(included)g(b)m
+(y)g(reference)h(in)g(this)f(License,)j(but)d(only)h(as)g(regards)f
+(disclaiming)i(w)m(arran)m(ties:)330 5080 y(an)m(y)e(other)g
+(implication)i(that)e(these)g(W)-8 b(arran)m(t)m(y)39
+b(Disclaimers)f(ma)m(y)g(ha)m(v)m(e)g(is)f(v)m(oid)g(and)f(has)h(no)330
+5189 y(e\013ect)32 b(on)e(the)h(meaning)f(of)h(this)f(License.)199
+5340 y(2.)61 b(VERBA)-8 b(TIM)31 b(COPYING)p eop end
+%%Page: 169 175
+TeXDict begin 169 174 bop 150 -116 a Fu(App)s(endix)29
+b(C:)h(GNU)h(F)-8 b(ree)31 b(Do)s(cumen)m(tation)i(License)1560
+b(169)330 299 y(Y)-8 b(ou)39 b(ma)m(y)f(cop)m(y)h(and)e(distribute)h
+(the)g(Do)s(cumen)m(t)h(in)f(an)m(y)g(medium,)h(either)g(commercially)h
+(or)330 408 y(noncommercially)-8 b(,)48 b(pro)m(vided)42
+b(that)h(this)f(License,)47 b(the)42 b(cop)m(yrigh)m(t)i(notices,)j
+(and)42 b(the)h(license)330 518 y(notice)37 b(sa)m(ying)g(this)e
+(License)i(applies)e(to)i(the)f(Do)s(cumen)m(t)g(are)g(repro)s(duced)e
+(in)i(all)g(copies,)j(and)330 628 y(that)27 b(y)m(ou)g(add)f(no)h
+(other)f(conditions)h(whatso)s(ev)m(er)h(to)f(those)g(of)g(this)f
+(License.)40 b(Y)-8 b(ou)27 b(ma)m(y)g(not)g(use)330
+737 y(tec)m(hnical)35 b(measures)d(to)i(obstruct)f(or)g(con)m(trol)h
+(the)f(reading)g(or)g(further)e(cop)m(ying)j(of)f(the)g(copies)330
+847 y(y)m(ou)25 b(mak)m(e)g(or)g(distribute.)38 b(Ho)m(w)m(ev)m(er,)28
+b(y)m(ou)d(ma)m(y)g(accept)h(comp)s(ensation)f(in)f(exc)m(hange)j(for)d
+(copies.)330 956 y(If)32 b(y)m(ou)g(distribute)g(a)h(large)g(enough)f
+(n)m(um)m(b)s(er)f(of)h(copies)h(y)m(ou)f(m)m(ust)h(also)g(follo)m(w)g
+(the)f(conditions)330 1066 y(in)e(section)i(3.)330 1200
+y(Y)-8 b(ou)21 b(ma)m(y)h(also)f(lend)g(copies,)i(under)d(the)h(same)g
+(conditions)g(stated)h(ab)s(o)m(v)m(e,)i(and)c(y)m(ou)h(ma)m(y)g
+(publicly)330 1310 y(displa)m(y)31 b(copies.)199 1443
+y(3.)61 b(COPYING)30 b(IN)g(QUANTITY)330 1577 y(If)25
+b(y)m(ou)g(publish)f(prin)m(ted)g(copies)i(\(or)g(copies)g(in)f(media)g
+(that)h(commonly)g(ha)m(v)m(e)g(prin)m(ted)f(co)m(v)m(ers\))i(of)330
+1687 y(the)32 b(Do)s(cumen)m(t,)h(n)m(um)m(b)s(ering)e(more)h(than)f
+(100,)j(and)d(the)h(Do)s(cumen)m(t's)h(license)f(notice)h(requires)330
+1797 y(Co)m(v)m(er)i(T)-8 b(exts,)36 b(y)m(ou)f(m)m(ust)f(enclose)i
+(the)e(copies)h(in)f(co)m(v)m(ers)i(that)f(carry)-8 b(,)36
+b(clearly)f(and)f(legibly)-8 b(,)37 b(all)330 1906 y(these)j(Co)m(v)m
+(er)g(T)-8 b(exts:)59 b(F)-8 b(ron)m(t-Co)m(v)m(er)41
+b(T)-8 b(exts)40 b(on)f(the)g(fron)m(t)g(co)m(v)m(er,)44
+b(and)38 b(Bac)m(k-Co)m(v)m(er)k(T)-8 b(exts)40 b(on)330
+2016 y(the)29 b(bac)m(k)h(co)m(v)m(er.)42 b(Both)30 b(co)m(v)m(ers)h(m)
+m(ust)e(also)h(clearly)g(and)f(legibly)h(iden)m(tify)f(y)m(ou)h(as)f
+(the)h(publisher)330 2125 y(of)k(these)h(copies.)53 b(The)34
+b(fron)m(t)h(co)m(v)m(er)h(m)m(ust)e(presen)m(t)g(the)h(full)f(title)i
+(with)d(all)j(w)m(ords)d(of)i(the)f(title)330 2235 y(equally)e
+(prominen)m(t)e(and)g(visible.)43 b(Y)-8 b(ou)31 b(ma)m(y)g(add)g
+(other)g(material)h(on)f(the)g(co)m(v)m(ers)h(in)e(addition.)330
+2345 y(Cop)m(ying)36 b(with)g(c)m(hanges)h(limited)g(to)g(the)g(co)m(v)
+m(ers,)i(as)d(long)h(as)g(they)f(preserv)m(e)g(the)h(title)g(of)g(the)
+330 2454 y(Do)s(cumen)m(t)h(and)e(satisfy)i(these)f(conditions,)j(can)d
+(b)s(e)g(treated)h(as)f(v)m(erbatim)h(cop)m(ying)g(in)f(other)330
+2564 y(resp)s(ects.)330 2698 y(If)32 b(the)h(required)f(texts)i(for)e
+(either)h(co)m(v)m(er)i(are)e(to)s(o)g(v)m(oluminous)g(to)g(\014t)g
+(legibly)-8 b(,)35 b(y)m(ou)e(should)f(put)330 2807 y(the)h(\014rst)f
+(ones)h(listed)g(\(as)h(man)m(y)f(as)g(\014t)g(reasonably\))g(on)g(the)
+g(actual)h(co)m(v)m(er,)h(and)e(con)m(tin)m(ue)h(the)330
+2917 y(rest)d(on)m(to)g(adjacen)m(t)h(pages.)330 3051
+y(If)27 b(y)m(ou)g(publish)e(or)i(distribute)g(Opaque)f(copies)i(of)f
+(the)h(Do)s(cumen)m(t)f(n)m(um)m(b)s(ering)f(more)i(than)e(100,)330
+3160 y(y)m(ou)i(m)m(ust)g(either)h(include)e(a)i(mac)m(hine-readable)g
+(T)-8 b(ransparen)m(t)28 b(cop)m(y)h(along)g(with)e(eac)m(h)i(Opaque)
+330 3270 y(cop)m(y)-8 b(,)38 b(or)d(state)h(in)f(or)g(with)g(eac)m(h)h
+(Opaque)e(cop)m(y)i(a)g(computer-net)m(w)m(ork)g(lo)s(cation)h(from)d
+(whic)m(h)330 3380 y(the)24 b(general)i(net)m(w)m(ork-using)f(public)e
+(has)h(access)i(to)f(do)m(wnload)f(using)g(public-standard)f(net)m(w)m
+(ork)330 3489 y(proto)s(cols)40 b(a)f(complete)h(T)-8
+b(ransparen)m(t)39 b(cop)m(y)g(of)g(the)h(Do)s(cumen)m(t,)i(free)d(of)g
+(added)f(material.)67 b(If)330 3599 y(y)m(ou)39 b(use)g(the)g(latter)h
+(option,)h(y)m(ou)f(m)m(ust)e(tak)m(e)j(reasonably)e(pruden)m(t)e
+(steps,)k(when)d(y)m(ou)h(b)s(egin)330 3708 y(distribution)f(of)g
+(Opaque)g(copies)h(in)e(quan)m(tit)m(y)-8 b(,)43 b(to)38
+b(ensure)g(that)h(this)f(T)-8 b(ransparen)m(t)38 b(cop)m(y)h(will)330
+3818 y(remain)30 b(th)m(us)g(accessible)i(at)f(the)f(stated)h(lo)s
+(cation)h(un)m(til)e(at)h(least)h(one)e(y)m(ear)h(after)g(the)f(last)h
+(time)330 3927 y(y)m(ou)37 b(distribute)f(an)h(Opaque)f(cop)m(y)i
+(\(directly)g(or)e(through)g(y)m(our)h(agen)m(ts)h(or)f(retailers\))h
+(of)f(that)330 4037 y(edition)31 b(to)g(the)g(public.)330
+4171 y(It)k(is)f(requested,)i(but)e(not)h(required,)g(that)g(y)m(ou)g
+(con)m(tact)h(the)f(authors)f(of)h(the)g(Do)s(cumen)m(t)g(w)m(ell)330
+4281 y(b)s(efore)28 b(redistributing)g(an)m(y)h(large)h(n)m(um)m(b)s
+(er)d(of)i(copies,)h(to)f(giv)m(e)h(them)f(a)g(c)m(hance)h(to)f(pro)m
+(vide)g(y)m(ou)330 4390 y(with)h(an)g(up)s(dated)f(v)m(ersion)i(of)g
+(the)f(Do)s(cumen)m(t.)199 4524 y(4.)61 b(MODIFICA)-8
+b(TIONS)330 4658 y(Y)g(ou)26 b(ma)m(y)g(cop)m(y)g(and)f(distribute)g(a)
+h(Mo)s(di\014ed)f(V)-8 b(ersion)26 b(of)g(the)g(Do)s(cumen)m(t)g(under)
+e(the)h(conditions)330 4768 y(of)c(sections)h(2)g(and)e(3)h(ab)s(o)m(v)
+m(e,)k(pro)m(vided)20 b(that)i(y)m(ou)f(release)i(the)e(Mo)s(di\014ed)f
+(V)-8 b(ersion)22 b(under)d(precisely)330 4877 y(this)29
+b(License,)h(with)f(the)g(Mo)s(di\014ed)f(V)-8 b(ersion)30
+b(\014lling)f(the)g(role)h(of)f(the)g(Do)s(cumen)m(t,)h(th)m(us)f
+(licensing)330 4987 y(distribution)k(and)h(mo)s(di\014cation)g(of)h
+(the)f(Mo)s(di\014ed)f(V)-8 b(ersion)35 b(to)g(who)s(ev)m(er)f(p)s
+(ossesses)f(a)i(cop)m(y)g(of)330 5096 y(it.)41 b(In)30
+b(addition,)h(y)m(ou)f(m)m(ust)h(do)f(these)h(things)f(in)g(the)h(Mo)s
+(di\014ed)e(V)-8 b(ersion:)357 5230 y(A.)60 b(Use)33
+b(in)f(the)h(Title)h(P)m(age)g(\(and)f(on)f(the)h(co)m(v)m(ers,)i(if)e
+(an)m(y\))g(a)g(title)h(distinct)f(from)g(that)g(of)g(the)510
+5340 y(Do)s(cumen)m(t,)j(and)d(from)g(those)i(of)f(previous)f(v)m
+(ersions)h(\(whic)m(h)g(should,)g(if)g(there)g(w)m(ere)g(an)m(y)-8
+b(,)p eop end
+%%Page: 170 176
+TeXDict begin 170 175 bop 150 -116 a Fu(App)s(endix)29
+b(C:)h(GNU)h(F)-8 b(ree)31 b(Do)s(cumen)m(tation)i(License)1560
+b(170)510 299 y(b)s(e)31 b(listed)h(in)f(the)g(History)h(section)g(of)g
+(the)f(Do)s(cumen)m(t\).)45 b(Y)-8 b(ou)32 b(ma)m(y)g(use)f(the)g(same)
+h(title)h(as)510 408 y(a)e(previous)f(v)m(ersion)g(if)h(the)f(original)
+i(publisher)d(of)h(that)h(v)m(ersion)g(giv)m(es)h(p)s(ermission.)360
+545 y(B.)61 b(List)31 b(on)f(the)h(Title)g(P)m(age,)i(as)d(authors,)h
+(one)g(or)f(more)h(p)s(ersons)e(or)h(en)m(tities)j(resp)s(onsible)c
+(for)510 655 y(authorship)c(of)h(the)h(mo)s(di\014cations)f(in)g(the)g
+(Mo)s(di\014ed)f(V)-8 b(ersion,)28 b(together)g(with)d(at)i(least)h
+(\014v)m(e)510 765 y(of)c(the)g(principal)g(authors)f(of)i(the)f(Do)s
+(cumen)m(t)g(\(all)h(of)g(its)f(principal)g(authors,)h(if)f(it)g(has)g
+(few)m(er)510 874 y(than)30 b(\014v)m(e\),)h(unless)f(they)h(release)g
+(y)m(ou)g(from)f(this)g(requiremen)m(t.)359 1011 y(C.)60
+b(State)32 b(on)e(the)h(Title)h(page)f(the)g(name)g(of)g(the)g
+(publisher)e(of)i(the)g(Mo)s(di\014ed)f(V)-8 b(ersion,)32
+b(as)f(the)510 1121 y(publisher.)355 1258 y(D.)61 b(Preserv)m(e)31
+b(all)g(the)g(cop)m(yrigh)m(t)h(notices)f(of)g(the)f(Do)s(cumen)m(t.)
+363 1395 y(E.)60 b(Add)30 b(an)i(appropriate)f(cop)m(yrigh)m(t)i
+(notice)f(for)g(y)m(our)f(mo)s(di\014cations)g(adjacen)m(t)i(to)f(the)g
+(other)510 1504 y(cop)m(yrigh)m(t)g(notices.)365 1641
+y(F.)61 b(Include,)28 b(immediately)h(after)f(the)h(cop)m(yrigh)m(t)g
+(notices,)h(a)e(license)h(notice)g(giving)g(the)f(public)510
+1751 y(p)s(ermission)23 b(to)j(use)e(the)g(Mo)s(di\014ed)g(V)-8
+b(ersion)25 b(under)e(the)i(terms)f(of)h(this)f(License,)j(in)d(the)g
+(form)510 1861 y(sho)m(wn)30 b(in)g(the)g(Addendum)f(b)s(elo)m(w.)353
+1998 y(G.)61 b(Preserv)m(e)23 b(in)g(that)g(license)h(notice)g(the)f
+(full)g(lists)g(of)g(In)m(v)-5 b(arian)m(t)23 b(Sections)h(and)e
+(required)g(Co)m(v)m(er)510 2107 y(T)-8 b(exts)31 b(giv)m(en)g(in)f
+(the)h(Do)s(cumen)m(t's)g(license)h(notice.)357 2244
+y(H.)60 b(Include)30 b(an)g(unaltered)g(cop)m(y)h(of)g(this)f(License.)
+392 2381 y(I.)60 b(Preserv)m(e)33 b(the)f(section)h(En)m(titled)g
+(\\History",)h(Preserv)m(e)f(its)f(Title,)i(and)d(add)h(to)h(it)f(an)g
+(item)510 2491 y(stating)d(at)g(least)g(the)g(title,)h(y)m(ear,)g(new)d
+(authors,)i(and)e(publisher)f(of)j(the)f(Mo)s(di\014ed)f(V)-8
+b(ersion)510 2600 y(as)32 b(giv)m(en)g(on)f(the)h(Title)g(P)m(age.)45
+b(If)31 b(there)h(is)f(no)g(section)i(En)m(titled)f(\\History")h(in)e
+(the)g(Do)s(cu-)510 2710 y(men)m(t,)37 b(create)f(one)f(stating)h(the)f
+(title,)i(y)m(ear,)g(authors,)f(and)e(publisher)f(of)i(the)g(Do)s
+(cumen)m(t)510 2819 y(as)h(giv)m(en)h(on)f(its)h(Title)g(P)m(age,)i
+(then)d(add)g(an)g(item)g(describing)g(the)g(Mo)s(di\014ed)g(V)-8
+b(ersion)37 b(as)510 2929 y(stated)31 b(in)f(the)h(previous)f(sen)m
+(tence.)378 3066 y(J.)60 b(Preserv)m(e)33 b(the)g(net)m(w)m(ork)g(lo)s
+(cation,)i(if)d(an)m(y)-8 b(,)34 b(giv)m(en)f(in)g(the)f(Do)s(cumen)m
+(t)h(for)g(public)e(access)j(to)510 3176 y(a)e(T)-8 b(ransparen)m(t)30
+b(cop)m(y)i(of)g(the)f(Do)s(cumen)m(t,)h(and)f(lik)m(ewise)h(the)g(net)
+m(w)m(ork)g(lo)s(cations)g(giv)m(en)g(in)510 3285 y(the)g(Do)s(cumen)m
+(t)g(for)g(previous)f(v)m(ersions)h(it)g(w)m(as)g(based)f(on.)45
+b(These)31 b(ma)m(y)h(b)s(e)f(placed)h(in)g(the)510 3395
+y(\\History")27 b(section.)40 b(Y)-8 b(ou)25 b(ma)m(y)h(omit)g(a)f(net)
+m(w)m(ork)h(lo)s(cation)g(for)f(a)h(w)m(ork)f(that)g(w)m(as)h
+(published)510 3504 y(at)36 b(least)h(four)e(y)m(ears)i(b)s(efore)e
+(the)h(Do)s(cumen)m(t)h(itself,)h(or)d(if)h(the)g(original)h(publisher)
+d(of)i(the)510 3614 y(v)m(ersion)31 b(it)g(refers)f(to)h(giv)m(es)h(p)s
+(ermission.)354 3751 y(K.)60 b(F)-8 b(or)24 b(an)m(y)h(section)f(En)m
+(titled)h(\\Ac)m(kno)m(wledgemen)m(ts")i(or)d(\\Dedications",)k
+(Preserv)m(e)c(the)g(Title)510 3861 y(of)j(the)f(section,)j(and)d
+(preserv)m(e)h(in)f(the)h(section)g(all)h(the)e(substance)h(and)f(tone)
+h(of)f(eac)m(h)i(of)f(the)510 3970 y(con)m(tributor)k(ac)m(kno)m
+(wledgemen)m(ts)i(and/or)d(dedications)h(giv)m(en)h(therein.)368
+4107 y(L.)60 b(Preserv)m(e)36 b(all)g(the)g(In)m(v)-5
+b(arian)m(t)36 b(Sections)g(of)f(the)h(Do)s(cumen)m(t,)h(unaltered)f
+(in)f(their)g(text)i(and)510 4217 y(in)f(their)g(titles.)58
+b(Section)37 b(n)m(um)m(b)s(ers)d(or)i(the)g(equiv)-5
+b(alen)m(t)38 b(are)e(not)g(considered)g(part)g(of)g(the)510
+4326 y(section)c(titles.)341 4463 y(M.)61 b(Delete)33
+b(an)m(y)e(section)h(En)m(titled)f(\\Endorsemen)m(ts".)42
+b(Suc)m(h)30 b(a)i(section)f(ma)m(y)h(not)f(b)s(e)f(included)510
+4573 y(in)g(the)h(Mo)s(di\014ed)e(V)-8 b(ersion.)357
+4710 y(N.)60 b(Do)29 b(not)g(retitle)h(an)m(y)e(existing)i(section)f
+(to)g(b)s(e)f(En)m(titled)h(\\Endorsemen)m(ts")g(or)f(to)h(con\015ict)g
+(in)510 4819 y(title)j(with)e(an)m(y)h(In)m(v)-5 b(arian)m(t)31
+b(Section.)354 4956 y(O.)60 b(Preserv)m(e)31 b(an)m(y)g(W)-8
+b(arran)m(t)m(y)32 b(Disclaimers.)330 5121 y(If)h(the)g(Mo)s(di\014ed)g
+(V)-8 b(ersion)34 b(includes)f(new)g(fron)m(t-matter)i(sections)f(or)f
+(app)s(endices)g(that)h(qualify)330 5230 y(as)28 b(Secondary)g
+(Sections)g(and)f(con)m(tain)j(no)d(material)j(copied)e(from)f(the)h
+(Do)s(cumen)m(t,)i(y)m(ou)e(ma)m(y)g(at)330 5340 y(y)m(our)k(option)h
+(designate)h(some)e(or)h(all)g(of)f(these)h(sections)h(as)e(in)m(v)-5
+b(arian)m(t.)48 b(T)-8 b(o)33 b(do)f(this,)h(add)f(their)p
+eop end
+%%Page: 171 177
+TeXDict begin 171 176 bop 150 -116 a Fu(App)s(endix)29
+b(C:)h(GNU)h(F)-8 b(ree)31 b(Do)s(cumen)m(tation)i(License)1560
+b(171)330 299 y(titles)37 b(to)f(the)f(list)h(of)g(In)m(v)-5
+b(arian)m(t)36 b(Sections)g(in)f(the)h(Mo)s(di\014ed)f(V)-8
+b(ersion's)36 b(license)g(notice.)57 b(These)330 408
+y(titles)32 b(m)m(ust)e(b)s(e)g(distinct)h(from)e(an)m(y)i(other)g
+(section)g(titles.)330 551 y(Y)-8 b(ou)43 b(ma)m(y)g(add)f(a)g(section)
+i(En)m(titled)f(\\Endorsemen)m(ts",)j(pro)m(vided)c(it)h(con)m(tains)g
+(nothing)g(but)330 661 y(endorsemen)m(ts)30 b(of)g(y)m(our)f(Mo)s
+(di\014ed)g(V)-8 b(ersion)31 b(b)m(y)e(v)-5 b(arious)30
+b(parties|for)g(example,)g(statemen)m(ts)i(of)330 770
+y(p)s(eer)27 b(review)g(or)g(that)h(the)f(text)i(has)d(b)s(een)h(appro)
+m(v)m(ed)g(b)m(y)g(an)h(organization)h(as)e(the)h(authoritativ)m(e)330
+880 y(de\014nition)i(of)h(a)f(standard.)330 1022 y(Y)-8
+b(ou)29 b(ma)m(y)g(add)e(a)i(passage)g(of)g(up)e(to)i(\014v)m(e)g(w)m
+(ords)e(as)i(a)g(F)-8 b(ron)m(t-Co)m(v)m(er)30 b(T)-8
+b(ext,)30 b(and)e(a)g(passage)i(of)e(up)330 1132 y(to)g(25)g(w)m(ords)e
+(as)i(a)f(Bac)m(k-Co)m(v)m(er)j(T)-8 b(ext,)29 b(to)f(the)f(end)f(of)i
+(the)f(list)h(of)f(Co)m(v)m(er)h(T)-8 b(exts)27 b(in)g(the)h(Mo)s
+(di\014ed)330 1241 y(V)-8 b(ersion.)58 b(Only)35 b(one)h(passage)h(of)f
+(F)-8 b(ron)m(t-Co)m(v)m(er)38 b(T)-8 b(ext)36 b(and)g(one)g(of)g(Bac)m
+(k-Co)m(v)m(er)j(T)-8 b(ext)36 b(ma)m(y)h(b)s(e)330 1351
+y(added)27 b(b)m(y)g(\(or)h(through)f(arrangemen)m(ts)h(made)g(b)m(y\))
+g(an)m(y)g(one)f(en)m(tit)m(y)-8 b(.)42 b(If)27 b(the)h(Do)s(cumen)m(t)
+g(already)330 1461 y(includes)34 b(a)g(co)m(v)m(er)h(text)g(for)f(the)g
+(same)h(co)m(v)m(er,)h(previously)e(added)f(b)m(y)h(y)m(ou)g(or)g(b)m
+(y)g(arrangemen)m(t)330 1570 y(made)h(b)m(y)g(the)h(same)f(en)m(tit)m
+(y)i(y)m(ou)f(are)f(acting)i(on)e(b)s(ehalf)f(of,)j(y)m(ou)f(ma)m(y)g
+(not)f(add)g(another;)j(but)330 1680 y(y)m(ou)c(ma)m(y)h(replace)g(the)
+f(old)g(one,)i(on)e(explicit)h(p)s(ermission)e(from)g(the)i(previous)e
+(publisher)f(that)330 1789 y(added)e(the)g(old)h(one.)330
+1932 y(The)25 b(author\(s\))h(and)f(publisher\(s\))f(of)i(the)f(Do)s
+(cumen)m(t)h(do)g(not)f(b)m(y)h(this)f(License)h(giv)m(e)h(p)s
+(ermission)330 2041 y(to)k(use)f(their)g(names)h(for)f(publicit)m(y)g
+(for)h(or)f(to)h(assert)g(or)f(imply)g(endorsemen)m(t)g(of)h(an)m(y)g
+(Mo)s(di\014ed)330 2151 y(V)-8 b(ersion.)199 2293 y(5.)61
+b(COMBINING)31 b(DOCUMENTS)330 2436 y(Y)-8 b(ou)39 b(ma)m(y)g(com)m
+(bine)h(the)f(Do)s(cumen)m(t)g(with)g(other)f(do)s(cumen)m(ts)h
+(released)g(under)f(this)g(License,)330 2545 y(under)f(the)h(terms)g
+(de\014ned)f(in)h(section)h(4)g(ab)s(o)m(v)m(e)g(for)f(mo)s(di\014ed)f
+(v)m(ersions,)k(pro)m(vided)d(that)h(y)m(ou)330 2655
+y(include)25 b(in)g(the)g(com)m(bination)i(all)f(of)g(the)f(In)m(v)-5
+b(arian)m(t)26 b(Sections)g(of)g(all)g(of)f(the)h(original)g(do)s
+(cumen)m(ts,)330 2765 y(unmo)s(di\014ed,)g(and)g(list)h(them)g(all)g
+(as)g(In)m(v)-5 b(arian)m(t)28 b(Sections)f(of)g(y)m(our)g(com)m(bined)
+g(w)m(ork)f(in)h(its)g(license)330 2874 y(notice,)32
+b(and)e(that)h(y)m(ou)f(preserv)m(e)h(all)g(their)g(W)-8
+b(arran)m(t)m(y)32 b(Disclaimers.)330 3017 y(The)e(com)m(bined)g(w)m
+(ork)h(need)e(only)i(con)m(tain)g(one)g(cop)m(y)g(of)f(this)g(License,)
+i(and)d(m)m(ultiple)i(iden)m(tical)330 3126 y(In)m(v)-5
+b(arian)m(t)33 b(Sections)g(ma)m(y)g(b)s(e)f(replaced)h(with)f(a)h
+(single)g(cop)m(y)-8 b(.)48 b(If)32 b(there)h(are)g(m)m(ultiple)g(In)m
+(v)-5 b(arian)m(t)330 3236 y(Sections)27 b(with)g(the)g(same)g(name)g
+(but)f(di\013eren)m(t)h(con)m(ten)m(ts,)i(mak)m(e)f(the)f(title)h(of)f
+(eac)m(h)h(suc)m(h)f(section)330 3345 y(unique)33 b(b)m(y)h(adding)f
+(at)i(the)f(end)g(of)g(it,)h(in)f(paren)m(theses,)i(the)e(name)g(of)g
+(the)g(original)h(author)f(or)330 3455 y(publisher)23
+b(of)i(that)h(section)g(if)f(kno)m(wn,)h(or)f(else)h(a)f(unique)f(n)m
+(um)m(b)s(er.)38 b(Mak)m(e)26 b(the)g(same)f(adjustmen)m(t)330
+3565 y(to)g(the)g(section)g(titles)h(in)e(the)h(list)g(of)f(In)m(v)-5
+b(arian)m(t)26 b(Sections)f(in)f(the)g(license)i(notice)g(of)e(the)h
+(com)m(bined)330 3674 y(w)m(ork.)330 3817 y(In)41 b(the)g(com)m
+(bination,)46 b(y)m(ou)41 b(m)m(ust)g(com)m(bine)h(an)m(y)g(sections)g
+(En)m(titled)g(\\History")h(in)e(the)g(v)-5 b(ari-)330
+3926 y(ous)32 b(original)h(do)s(cumen)m(ts,)g(forming)f(one)g(section)h
+(En)m(titled)g(\\History";)i(lik)m(ewise)f(com)m(bine)f(an)m(y)330
+4036 y(sections)g(En)m(titled)f(\\Ac)m(kno)m(wledgemen)m(ts",)k(and)31
+b(an)m(y)h(sections)h(En)m(titled)g(\\Dedications".)47
+b(Y)-8 b(ou)330 4145 y(m)m(ust)30 b(delete)i(all)f(sections)h(En)m
+(titled)f(\\Endorsemen)m(ts.")199 4288 y(6.)61 b(COLLECTIONS)28
+b(OF)i(DOCUMENTS)330 4430 y(Y)-8 b(ou)32 b(ma)m(y)h(mak)m(e)g(a)f
+(collection)i(consisting)f(of)f(the)g(Do)s(cumen)m(t)g(and)g(other)g
+(do)s(cumen)m(ts)f(released)330 4540 y(under)41 b(this)h(License,)k
+(and)c(replace)h(the)g(individual)f(copies)h(of)f(this)g(License)h(in)f
+(the)h(v)-5 b(arious)330 4650 y(do)s(cumen)m(ts)42 b(with)g(a)h(single)
+g(cop)m(y)h(that)f(is)f(included)g(in)g(the)h(collection,)48
+b(pro)m(vided)42 b(that)i(y)m(ou)330 4759 y(follo)m(w)38
+b(the)g(rules)e(of)h(this)g(License)h(for)f(v)m(erbatim)h(cop)m(ying)g
+(of)f(eac)m(h)h(of)f(the)h(do)s(cumen)m(ts)e(in)h(all)330
+4869 y(other)31 b(resp)s(ects.)330 5011 y(Y)-8 b(ou)32
+b(ma)m(y)g(extract)h(a)f(single)g(do)s(cumen)m(t)f(from)g(suc)m(h)g(a)h
+(collection,)i(and)d(distribute)g(it)h(individu-)330
+5121 y(ally)k(under)d(this)i(License,)i(pro)m(vided)e(y)m(ou)g(insert)g
+(a)g(cop)m(y)h(of)f(this)g(License)g(in)m(to)h(the)g(extracted)330
+5230 y(do)s(cumen)m(t,)d(and)f(follo)m(w)i(this)e(License)h(in)g(all)g
+(other)g(resp)s(ects)f(regarding)h(v)m(erbatim)g(cop)m(ying)h(of)330
+5340 y(that)d(do)s(cumen)m(t.)p eop end
+%%Page: 172 178
+TeXDict begin 172 177 bop 150 -116 a Fu(App)s(endix)29
+b(C:)h(GNU)h(F)-8 b(ree)31 b(Do)s(cumen)m(tation)i(License)1560
+b(172)199 299 y(7.)61 b(A)m(GGREGA)-8 b(TION)32 b(WITH)e(INDEPENDENT)h
+(W)m(ORKS)330 441 y(A)d(compilation)i(of)e(the)g(Do)s(cumen)m(t)h(or)f
+(its)g(deriv)-5 b(ativ)m(es)30 b(with)d(other)i(separate)g(and)e(indep)
+s(enden)m(t)330 551 y(do)s(cumen)m(ts)33 b(or)g(w)m(orks,)h(in)f(or)h
+(on)f(a)g(v)m(olume)h(of)g(a)f(storage)i(or)e(distribution)g(medium,)g
+(is)h(called)330 661 y(an)c(\\aggregate")k(if)c(the)g(cop)m(yrigh)m(t)i
+(resulting)e(from)f(the)i(compilation)g(is)f(not)h(used)e(to)i(limit)g
+(the)330 770 y(legal)d(righ)m(ts)f(of)g(the)g(compilation's)h(users)e
+(b)s(ey)m(ond)g(what)g(the)h(individual)f(w)m(orks)g(p)s(ermit.)39
+b(When)330 880 y(the)g(Do)s(cumen)m(t)g(is)f(included)g(in)g(an)g
+(aggregate,)44 b(this)38 b(License)h(do)s(es)f(not)h(apply)f(to)h(the)g
+(other)330 989 y(w)m(orks)30 b(in)g(the)h(aggregate)i(whic)m(h)d(are)h
+(not)g(themselv)m(es)g(deriv)-5 b(ativ)m(e)32 b(w)m(orks)f(of)f(the)h
+(Do)s(cumen)m(t.)330 1132 y(If)22 b(the)h(Co)m(v)m(er)h(T)-8
+b(ext)23 b(requiremen)m(t)g(of)g(section)h(3)f(is)g(applicable)h(to)f
+(these)h(copies)f(of)g(the)g(Do)s(cumen)m(t,)330 1241
+y(then)f(if)g(the)h(Do)s(cumen)m(t)g(is)g(less)f(than)g(one)h(half)f
+(of)h(the)g(en)m(tire)g(aggregate,)k(the)c(Do)s(cumen)m(t's)g(Co)m(v)m
+(er)330 1351 y(T)-8 b(exts)27 b(ma)m(y)g(b)s(e)f(placed)h(on)g(co)m(v)m
+(ers)h(that)f(brac)m(k)m(et)h(the)f(Do)s(cumen)m(t)g(within)f(the)h
+(aggregate,)j(or)d(the)330 1461 y(electronic)37 b(equiv)-5
+b(alen)m(t)36 b(of)g(co)m(v)m(ers)g(if)f(the)g(Do)s(cumen)m(t)h(is)f
+(in)g(electronic)i(form.)54 b(Otherwise)35 b(they)330
+1570 y(m)m(ust)30 b(app)s(ear)g(on)g(prin)m(ted)g(co)m(v)m(ers)i(that)f
+(brac)m(k)m(et)h(the)f(whole)f(aggregate.)199 1713 y(8.)61
+b(TRANSLA)-8 b(TION)330 1855 y(T)g(ranslation)41 b(is)f(considered)f(a)
+i(kind)e(of)h(mo)s(di\014cation,)j(so)d(y)m(ou)g(ma)m(y)h(distribute)e
+(translations)330 1965 y(of)45 b(the)f(Do)s(cumen)m(t)h(under)e(the)h
+(terms)h(of)f(section)i(4.)83 b(Replacing)45 b(In)m(v)-5
+b(arian)m(t)45 b(Sections)g(with)330 2074 y(translations)h(requires)f
+(sp)s(ecial)h(p)s(ermission)f(from)g(their)g(cop)m(yrigh)m(t)i
+(holders,)i(but)c(y)m(ou)g(ma)m(y)330 2184 y(include)24
+b(translations)i(of)e(some)h(or)g(all)g(In)m(v)-5 b(arian)m(t)25
+b(Sections)g(in)f(addition)h(to)g(the)g(original)h(v)m(ersions)330
+2293 y(of)32 b(these)f(In)m(v)-5 b(arian)m(t)33 b(Sections.)44
+b(Y)-8 b(ou)32 b(ma)m(y)g(include)f(a)h(translation)g(of)g(this)f
+(License,)i(and)d(all)j(the)330 2403 y(license)42 b(notices)g(in)f(the)
+h(Do)s(cumen)m(t,)j(and)40 b(an)m(y)i(W)-8 b(arran)m(t)m(y)42
+b(Disclaimers,)k(pro)m(vided)41 b(that)h(y)m(ou)330 2513
+y(also)f(include)f(the)g(original)h(English)f(v)m(ersion)g(of)g(this)g
+(License)h(and)e(the)h(original)h(v)m(ersions)g(of)330
+2622 y(those)35 b(notices)g(and)e(disclaimers.)53 b(In)33
+b(case)i(of)g(a)f(disagreemen)m(t)h(b)s(et)m(w)m(een)g(the)f
+(translation)i(and)330 2732 y(the)f(original)i(v)m(ersion)e(of)h(this)f
+(License)h(or)f(a)g(notice)i(or)e(disclaimer,)i(the)f(original)g(v)m
+(ersion)g(will)330 2841 y(prev)-5 b(ail.)330 2984 y(If)28
+b(a)h(section)h(in)e(the)h(Do)s(cumen)m(t)h(is)e(En)m(titled)i(\\Ac)m
+(kno)m(wledgemen)m(ts",)i(\\Dedications",)g(or)d(\\His-)330
+3093 y(tory",)f(the)f(requiremen)m(t)f(\(section)i(4\))f(to)g(Preserv)m
+(e)g(its)f(Title)i(\(section)f(1\))g(will)g(t)m(ypically)h(require)330
+3203 y(c)m(hanging)j(the)g(actual)h(title.)199 3345 y(9.)61
+b(TERMINA)-8 b(TION)330 3488 y(Y)g(ou)30 b(ma)m(y)h(not)f(cop)m(y)-8
+b(,)31 b(mo)s(dify)-8 b(,)30 b(sublicense,)g(or)g(distribute)f(the)h
+(Do)s(cumen)m(t)g(except)h(as)f(expressly)330 3598 y(pro)m(vided)38
+b(under)f(this)i(License.)65 b(An)m(y)39 b(attempt)h(otherwise)f(to)g
+(cop)m(y)-8 b(,)42 b(mo)s(dify)-8 b(,)40 b(sublicense,)h(or)330
+3707 y(distribute)30 b(it)h(is)f(v)m(oid,)h(and)f(will)h(automatically)
+i(terminate)f(y)m(our)e(righ)m(ts)h(under)e(this)h(License.)330
+3850 y(Ho)m(w)m(ev)m(er,)35 b(if)e(y)m(ou)f(cease)i(all)f(violation)i
+(of)d(this)g(License,)i(then)e(y)m(our)h(license)g(from)f(a)h
+(particular)330 3959 y(cop)m(yrigh)m(t)k(holder)e(is)h(reinstated)h
+(\(a\))f(pro)m(visionally)-8 b(,)39 b(unless)c(and)g(un)m(til)h(the)g
+(cop)m(yrigh)m(t)h(holder)330 4069 y(explicitly)42 b(and)e(\014nally)h
+(terminates)g(y)m(our)g(license,)j(and)c(\(b\))h(p)s(ermanen)m(tly)-8
+b(,)43 b(if)e(the)g(cop)m(yrigh)m(t)330 4178 y(holder)34
+b(fails)h(to)g(notify)g(y)m(ou)g(of)f(the)h(violation)h(b)m(y)e(some)h
+(reasonable)g(means)g(prior)e(to)i(60)h(da)m(ys)330 4288
+y(after)31 b(the)f(cessation.)330 4430 y(Moreo)m(v)m(er,)k(y)m(our)d
+(license)i(from)e(a)h(particular)f(cop)m(yrigh)m(t)i(holder)e(is)h
+(reinstated)g(p)s(ermanen)m(tly)f(if)330 4540 y(the)d(cop)m(yrigh)m(t)h
+(holder)f(noti\014es)g(y)m(ou)g(of)g(the)g(violation)h(b)m(y)f(some)g
+(reasonable)h(means,)f(this)g(is)g(the)330 4650 y(\014rst)f(time)i(y)m
+(ou)f(ha)m(v)m(e)h(receiv)m(ed)g(notice)g(of)f(violation)i(of)e(this)f
+(License)i(\(for)f(an)m(y)g(w)m(ork\))g(from)f(that)330
+4759 y(cop)m(yrigh)m(t)33 b(holder,)g(and)e(y)m(ou)h(cure)g(the)g
+(violation)i(prior)d(to)i(30)f(da)m(ys)h(after)f(y)m(our)g(receipt)h
+(of)f(the)330 4869 y(notice.)330 5011 y(T)-8 b(ermination)28
+b(of)g(y)m(our)f(righ)m(ts)h(under)e(this)i(section)g(do)s(es)f(not)h
+(terminate)h(the)e(licenses)i(of)f(parties)330 5121 y(who)38
+b(ha)m(v)m(e)h(receiv)m(ed)h(copies)e(or)h(righ)m(ts)f(from)g(y)m(ou)g
+(under)f(this)h(License.)64 b(If)38 b(y)m(our)g(righ)m(ts)h(ha)m(v)m(e)
+330 5230 y(b)s(een)25 b(terminated)i(and)e(not)h(p)s(ermanen)m(tly)g
+(reinstated,)i(receipt)f(of)f(a)g(cop)m(y)h(of)f(some)h(or)f(all)h(of)f
+(the)330 5340 y(same)31 b(material)h(do)s(es)e(not)g(giv)m(e)i(y)m(ou)f
+(an)m(y)g(righ)m(ts)f(to)i(use)e(it.)p eop end
+%%Page: 173 179
+TeXDict begin 173 178 bop 150 -116 a Fu(App)s(endix)29
+b(C:)h(GNU)h(F)-8 b(ree)31 b(Do)s(cumen)m(tation)i(License)1560
+b(173)154 299 y(10.)61 b(FUTURE)30 b(REVISIONS)f(OF)i(THIS)e(LICENSE)
+330 433 y(The)41 b(F)-8 b(ree)43 b(Soft)m(w)m(are)f(F)-8
+b(oundation)43 b(ma)m(y)f(publish)e(new,)k(revised)d(v)m(ersions)h(of)g
+(the)g(GNU)g(F)-8 b(ree)330 543 y(Do)s(cumen)m(tation)34
+b(License)e(from)g(time)h(to)g(time.)46 b(Suc)m(h)31
+b(new)h(v)m(ersions)g(will)h(b)s(e)e(similar)h(in)g(spirit)330
+653 y(to)j(the)g(presen)m(t)f(v)m(ersion,)i(but)e(ma)m(y)h(di\013er)f
+(in)g(detail)h(to)g(address)f(new)g(problems)f(or)i(concerns.)330
+762 y(See)c Ft(http://www.gnu.org/copy)o(left)o(/)p Fu(.)330
+897 y(Eac)m(h)f(v)m(ersion)g(of)g(the)f(License)h(is)g(giv)m(en)g(a)g
+(distinguishing)f(v)m(ersion)h(n)m(um)m(b)s(er.)39 b(If)29
+b(the)g(Do)s(cumen)m(t)330 1006 y(sp)s(eci\014es)45 b(that)h(a)g
+(particular)f(n)m(um)m(b)s(ered)f(v)m(ersion)i(of)f(this)g(License)h
+(\\or)g(an)m(y)g(later)g(v)m(ersion")330 1116 y(applies)33
+b(to)g(it,)h(y)m(ou)e(ha)m(v)m(e)i(the)f(option)g(of)f(follo)m(wing)i
+(the)f(terms)f(and)g(conditions)h(either)g(of)f(that)330
+1225 y(sp)s(eci\014ed)37 b(v)m(ersion)i(or)e(of)h(an)m(y)h(later)g(v)m
+(ersion)f(that)g(has)g(b)s(een)f(published)f(\(not)j(as)f(a)g(draft\))g
+(b)m(y)330 1335 y(the)33 b(F)-8 b(ree)34 b(Soft)m(w)m(are)f(F)-8
+b(oundation.)49 b(If)32 b(the)h(Do)s(cumen)m(t)g(do)s(es)g(not)g(sp)s
+(ecify)f(a)h(v)m(ersion)g(n)m(um)m(b)s(er)f(of)330 1445
+y(this)i(License,)j(y)m(ou)d(ma)m(y)i(c)m(ho)s(ose)f(an)m(y)g(v)m
+(ersion)g(ev)m(er)g(published)e(\(not)i(as)g(a)f(draft\))h(b)m(y)f(the)
+h(F)-8 b(ree)330 1554 y(Soft)m(w)m(are)33 b(F)-8 b(oundation.)46
+b(If)32 b(the)g(Do)s(cumen)m(t)g(sp)s(eci\014es)g(that)g(a)h(pro)m(xy)f
+(can)g(decide)g(whic)m(h)g(future)330 1664 y(v)m(ersions)h(of)g(this)f
+(License)h(can)g(b)s(e)f(used,)g(that)i(pro)m(xy's)e(public)g(statemen)
+m(t)i(of)f(acceptance)i(of)e(a)330 1773 y(v)m(ersion)e(p)s(ermanen)m
+(tly)f(authorizes)h(y)m(ou)g(to)g(c)m(ho)s(ose)g(that)g(v)m(ersion)g
+(for)f(the)h(Do)s(cumen)m(t.)154 1908 y(11.)61 b(RELICENSING)330
+2042 y(\\Massiv)m(e)39 b(Multiauthor)f(Collab)s(oration)g(Site")h(\(or)
+e(\\MMC)h(Site"\))h(means)e(an)m(y)h(W)-8 b(orld)37 b(Wide)330
+2152 y(W)-8 b(eb)36 b(serv)m(er)g(that)h(publishes)d(cop)m(yrigh)m
+(table)k(w)m(orks)e(and)f(also)i(pro)m(vides)e(prominen)m(t)h
+(facilities)330 2262 y(for)27 b(an)m(yb)s(o)s(dy)g(to)h(edit)g(those)g
+(w)m(orks.)39 b(A)28 b(public)f(wiki)h(that)g(an)m(yb)s(o)s(dy)e(can)i
+(edit)g(is)f(an)h(example)g(of)330 2371 y(suc)m(h)33
+b(a)h(serv)m(er.)51 b(A)34 b(\\Massiv)m(e)i(Multiauthor)e(Collab)s
+(oration")h(\(or)f(\\MMC"\))h(con)m(tained)g(in)f(the)330
+2481 y(site)d(means)f(an)m(y)h(set)g(of)g(cop)m(yrigh)m(table)h(w)m
+(orks)e(th)m(us)g(published)f(on)h(the)h(MMC)f(site.)330
+2615 y(\\CC-BY-SA")36 b(means)f(the)g(Creativ)m(e)i(Commons)e(A)m
+(ttribution-Share)g(Alik)m(e)i(3.0)f(license)g(pub-)330
+2725 y(lished)27 b(b)m(y)f(Creativ)m(e)j(Commons)d(Corp)s(oration,)h(a)
+g(not-for-pro\014t)g(corp)s(oration)h(with)e(a)h(principal)330
+2834 y(place)g(of)f(business)e(in)i(San)f(F)-8 b(rancisco,)29
+b(California,)f(as)e(w)m(ell)h(as)f(future)f(cop)m(yleft)i(v)m(ersions)
+f(of)g(that)330 2944 y(license)31 b(published)e(b)m(y)h(that)h(same)g
+(organization.)330 3078 y(\\Incorp)s(orate")h(means)e(to)h(publish)e
+(or)i(republish)e(a)i(Do)s(cumen)m(t,)g(in)g(whole)g(or)f(in)g(part,)h
+(as)g(part)330 3188 y(of)g(another)f(Do)s(cumen)m(t.)330
+3323 y(An)c(MMC)g(is)h(\\eligible)h(for)e(relicensing")h(if)g(it)f(is)h
+(licensed)f(under)f(this)h(License,)i(and)e(if)g(all)h(w)m(orks)330
+3432 y(that)43 b(w)m(ere)f(\014rst)f(published)f(under)h(this)h
+(License)g(somewhere)g(other)g(than)g(this)g(MMC,)h(and)330
+3542 y(subsequen)m(tly)34 b(incorp)s(orated)h(in)f(whole)h(or)g(in)f
+(part)h(in)m(to)h(the)f(MMC,)g(\(1\))h(had)e(no)h(co)m(v)m(er)h(texts)
+330 3651 y(or)30 b(in)m(v)-5 b(arian)m(t)32 b(sections,)g(and)d(\(2\))j
+(w)m(ere)f(th)m(us)f(incorp)s(orated)g(prior)g(to)h(No)m(v)m(em)m(b)s
+(er)g(1,)g(2008.)330 3786 y(The)40 b(op)s(erator)h(of)g(an)f(MMC)h
+(Site)g(ma)m(y)g(republish)e(an)h(MMC)h(con)m(tained)h(in)e(the)h(site)
+g(under)330 3895 y(CC-BY-SA)30 b(on)g(the)h(same)f(site)h(at)g(an)m(y)g
+(time)g(b)s(efore)e(August)h(1,)h(2009,)h(pro)m(vided)e(the)g(MMC)h(is)
+330 4005 y(eligible)h(for)e(relicensing.)p eop end
+%%Page: 174 180
+TeXDict begin 174 179 bop 150 -116 a Fu(App)s(endix)29
+b(C:)h(GNU)h(F)-8 b(ree)31 b(Do)s(cumen)m(tation)i(License)1560
+b(174)150 299 y Fs(ADDENDUM:)45 b(Ho)l(w)h(to)f(use)g(this)h(License)f
+(for)g(y)l(our)g(do)t(cumen)l(ts)150 458 y Fu(T)-8 b(o)35
+b(use)f(this)h(License)g(in)f(a)h(do)s(cumen)m(t)g(y)m(ou)f(ha)m(v)m(e)
+i(written,)g(include)f(a)f(cop)m(y)i(of)f(the)f(License)h(in)g(the)150
+568 y(do)s(cumen)m(t)30 b(and)g(put)g(the)g(follo)m(wing)i(cop)m(yrigh)
+m(t)g(and)e(license)h(notices)g(just)f(after)h(the)g(title)h(page:)468
+680 y Fe(Copyright)42 b(\(C\))79 b Fd(year)g(your)40
+b(name)p Fe(.)468 767 y(Permission)i(is)e(granted)g(to)g(copy,)h
+(distribute)g(and/or)g(modify)f(this)g(document)468 854
+y(under)h(the)f(terms)g(of)g(the)g(GNU)g(Free)g(Documentation)i
+(License,)f(Version)g(1.3)468 941 y(or)f(any)g(later)g(version)h
+(published)h(by)d(the)h(Free)g(Software)h(Foundation;)468
+1029 y(with)g(no)e(Invariant)j(Sections,)f(no)f(Front-Cover)h(Texts,)g
+(and)f(no)f(Back-Cover)468 1116 y(Texts.)80 b(A)40 b(copy)g(of)g(the)f
+(license)i(is)f(included)h(in)f(the)g(section)g(entitled)h(``GNU)468
+1203 y(Free)g(Documentation)h(License''.)275 1337 y Fu(If)d(y)m(ou)h
+(ha)m(v)m(e)h(In)m(v)-5 b(arian)m(t)41 b(Sections,)i(F)-8
+b(ron)m(t-Co)m(v)m(er)42 b(T)-8 b(exts)41 b(and)e(Bac)m(k-Co)m(v)m(er)k
+(T)-8 b(exts,)43 b(replace)e(the)150 1447 y(\\with)6
+b(.)22 b(.)g(.)12 b(T)-8 b(exts.")41 b(line)31 b(with)f(this:)547
+1559 y Fe(with)40 b(the)g(Invariant)h(Sections)g(being)g
+Fd(list)f(their)g(titles)p Fe(,)h(with)547 1646 y(the)f(Front-Cover)i
+(Texts)e(being)g Fd(list)p Fe(,)h(and)f(with)g(the)g(Back-Cover)h
+(Texts)547 1733 y(being)f Fd(list)p Fe(.)275 1868 y Fu(If)34
+b(y)m(ou)i(ha)m(v)m(e)g(In)m(v)-5 b(arian)m(t)36 b(Sections)g(without)f
+(Co)m(v)m(er)h(T)-8 b(exts,)38 b(or)d(some)g(other)h(com)m(bination)g
+(of)g(the)150 1978 y(three,)31 b(merge)g(those)g(t)m(w)m(o)g
+(alternativ)m(es)i(to)e(suit)f(the)h(situation.)275 2112
+y(If)23 b(y)m(our)h(do)s(cumen)m(t)f(con)m(tains)i(non)m(trivial)g
+(examples)g(of)f(program)f(co)s(de,)j(w)m(e)e(recommend)g(releasing)150
+2222 y(these)44 b(examples)f(in)g(parallel)h(under)e(y)m(our)h(c)m
+(hoice)i(of)e(free)g(soft)m(w)m(are)h(license,)k(suc)m(h)43
+b(as)g(the)g(GNU)150 2331 y(General)31 b(Public)f(License,)i(to)f(p)s
+(ermit)e(their)i(use)f(in)g(free)g(soft)m(w)m(are.)p
+eop end
+%%Page: 175 181
+TeXDict begin 175 180 bop 3614 -116 a Fu(175)150 299
+y Fp(App)t(endix)52 b(D)81 b(Indexes)150 639 y Fs(D.1)68
+b(Index)45 b(of)g(Shell)g(Builtin)g(Commands)146 806
+y(.)150 923 y Fe(.)19 b Fc(:)13 b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)33 b Fb(44)146 1163 y Fs(:)150 1280 y Fe(:)19 b Fc(:)13
+b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)33 b Fb(44)146
+1523 y Fs([)150 1640 y Fe([)19 b Fc(:)13 b(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)33 b Fb(48)146 1881 y Fs(A)150 1998 y Fe(alias)9
+b Fc(:)14 b(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)23 b Fb(51)146 2239 y
+Fs(B)150 2356 y Fe(bg)14 b Fc(:)g(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)29
+b Fb(108)150 2443 y Fe(bind)11 b Fc(:)j(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)25
+b Fb(51)150 2531 y Fe(break)9 b Fc(:)14 b(:)f(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)23
+b Fb(45)150 2618 y Fe(builtin)f Fc(:)13 b(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)35
+b Fb(53)146 2859 y Fs(C)150 2976 y Fe(caller)6 b Fc(:)15
+b(:)e(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)20 b Fb(53)150 3063 y Fe(cd)c Fc(:)e(:)f(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)g(:)31 b Fb(45)150 3151 y Fe(command)22
+b Fc(:)13 b(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)35 b Fb(53)150 3238 y Fe(compgen)18
+b Fc(:)d(:)e(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)33 b Fb(139)150 3326 y Fe(complete)16
+b Fc(:)f(:)e(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)31 b Fb(140)150 3413 y Fe(compopt)18 b Fc(:)d(:)e(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)33
+b Fb(143)150 3501 y Fe(continue)18 b Fc(:)d(:)e(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)32 b
+Fb(45)146 3741 y Fs(D)150 3858 y Fe(declare)22 b Fc(:)13
+b(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)
+g(:)g(:)g(:)35 b Fb(53)150 3946 y Fe(dirs)11 b Fc(:)j(:)f(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)h(:)25 b Fb(97)150 4033 y Fe(disown)d Fc(:)13
+b(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)36 b Fb(110)146 4274 y Fs(E)150 4391 y Fe(echo)11
+b Fc(:)j(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)25 b Fb(55)150 4478
+y Fe(enable)6 b Fc(:)15 b(:)e(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)20 b Fb(56)150
+4566 y Fe(eval)11 b Fc(:)j(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)25
+b Fb(45)150 4653 y Fe(exec)11 b Fc(:)j(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)25
+b Fb(46)150 4741 y Fe(exit)11 b Fc(:)j(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)25
+b Fb(46)150 4828 y Fe(export)6 b Fc(:)15 b(:)e(:)g(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)
+g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)20
+b Fb(46)146 5080 y Fs(F)150 5197 y Fe(fc)14 b Fc(:)g(:)f(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)29 b Fb(147)150 5284 y Fe(fg)14 b Fc(:)g(:)f(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)29 b Fb(108)2021 871 y Fs(G)2025 988 y Fe(getopts)22
+b Fc(:)13 b(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)35 b Fb(46)2021 1250 y Fs(H)2025
+1369 y Fe(hash)11 b Fc(:)j(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)26
+b Fb(47)2025 1457 y Fe(help)11 b Fc(:)j(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)26
+b Fb(56)2025 1544 y Fe(history)18 b Fc(:)d(:)e(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)33 b
+Fb(147)2021 1806 y Fs(J)2025 1924 y Fe(jobs)9 b Fc(:)14
+b(:)f(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)24 b Fb(108)2021 2186 y Fs(K)2025
+2303 y Fe(kill)9 b Fc(:)14 b(:)f(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)24
+b Fb(109)2021 2554 y Fs(L)2025 2672 y Fe(let)14 b Fc(:)f(:)g(:)h(:)f(:)
+g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)28 b Fb(56)2025 2760 y Fe(local)9 b Fc(:)14
+b(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)23 b Fb(57)2025 2848 y Fe(logout)6
+b Fc(:)14 b(:)f(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)21 b Fb(57)2021 3110 y Fs(M)2025
+3227 y Fe(mapfile)h Fc(:)13 b(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)35 b Fb(57)2021
+3489 y Fs(P)2025 3608 y Fe(popd)11 b Fc(:)j(:)f(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)26
+b Fb(98)2025 3696 y Fe(printf)6 b Fc(:)14 b(:)f(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)21
+b Fb(58)2025 3784 y Fe(pushd)9 b Fc(:)14 b(:)f(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)23
+b Fb(98)2025 3871 y Fe(pwd)14 b Fc(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)28
+b Fb(47)2021 4133 y Fs(R)2025 4251 y Fe(read)11 b Fc(:)j(:)f(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)26 b Fb(58)2025 4339 y Fe(readarray)15 b
+Fc(:)g(:)f(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)
+g(:)g(:)30 b Fb(60)2025 4427 y Fe(readonly)18 b Fc(:)d(:)e(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)33
+b Fb(47)2025 4515 y Fe(return)6 b Fc(:)14 b(:)f(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)21
+b Fb(48)2021 4765 y Fs(S)2025 4884 y Fe(set)14 b Fc(:)f(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)28 b Fb(62)2025 4972 y Fe(shift)9 b Fc(:)14
+b(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)23 b Fb(48)2025 5060 y Fe(shopt)9
+b Fc(:)14 b(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)23 b Fb(66)2025 5148
+y Fe(source)6 b Fc(:)14 b(:)f(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)21 b Fb(60)2025
+5235 y Fe(suspend)d Fc(:)d(:)e(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)33 b Fb(110)p eop end
+%%Page: 176 182
+TeXDict begin 176 181 bop 150 -116 a Fu(App)s(endix)29
+b(D:)i(Indexes)2623 b(176)146 294 y Fs(T)150 410 y Fe(test)11
+b Fc(:)j(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)25 b Fb(48)150 497
+y Fe(times)9 b Fc(:)14 b(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)23 b Fb(50)150
+584 y Fe(trap)11 b Fc(:)j(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)25
+b Fb(50)150 671 y Fe(type)11 b Fc(:)j(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)25
+b Fb(60)150 758 y Fe(typeset)d Fc(:)13 b(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)35
+b Fb(61)146 1003 y Fs(U)150 1119 y Fe(ulimit)6 b Fc(:)15
+b(:)e(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)20 b Fb(61)150 1206 y Fe(umask)9
+b Fc(:)14 b(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)23 b Fb(51)150 1293 y
+Fe(unalias)f Fc(:)13 b(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)35 b Fb(62)150 1380 y
+Fe(unset)9 b Fc(:)14 b(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)
+g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)23 b Fb(51)2021
+294 y Fs(W)2025 433 y Fe(wait)9 b Fc(:)14 b(:)f(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)24
+b Fb(109)150 2133 y Fs(D.2)68 b(Index)45 b(of)g(Shell)g(Reserv)l(ed)h
+(W)-11 b(ords)146 2704 y(!)150 2820 y Fe(!)21 b Fc(:)13
+b(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)36 b Fb(8)146
+3056 y Fs([)150 3172 y Fe([[)16 b Fc(:)e(:)f(:)g(:)g(:)g(:)g(:)h(:)f(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+g(:)31 b Fb(13)146 3414 y Fs(])150 3530 y Fe(]])16 b
+Fc(:)e(:)f(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)31 b Fb(13)146
+3770 y Fa({)150 3886 y Fe({)19 b Fc(:)13 b(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)33 b Fb(15)146 4125 y Fa(})150 4241 y Fe(})19
+b Fc(:)13 b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)33 b
+Fb(15)146 4475 y Fs(C)150 4591 y Fe(case)11 b Fc(:)j(:)f(:)g(:)h(:)f(:)
+g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)h(:)25 b Fb(11)146 4825 y Fs(D)150 4941 y Fe(do)16
+b Fc(:)e(:)f(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)31 b Fb(10)150
+5028 y Fe(done)11 b Fc(:)j(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)25
+b Fb(10)146 5261 y Fs(E)150 5377 y Fe(elif)11 b Fc(:)j(:)f(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)h(:)25 b Fb(11)150 5465 y Fe(else)11 b Fc(:)j(:)f(:)g(:)h(:)f(:)
+g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)h(:)25 b Fb(11)150 5552 y Fe(esac)11 b Fc(:)j(:)f(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)h(:)25 b Fb(11)2021 2703 y Fs(F)2025 2836 y Fe(fi)16
+b Fc(:)e(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)31 b Fb(11)2025
+2928 y Fe(for)14 b Fc(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)28
+b Fb(10)2025 3015 y Fe(function)18 b Fc(:)d(:)e(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)33 b
+Fb(18)2021 3359 y Fs(I)2025 3491 y Fe(if)16 b Fc(:)e(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)
+g(:)g(:)g(:)g(:)31 b Fb(11)2025 3578 y Fe(in)16 b Fc(:)e(:)f(:)g(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)31 b Fb(11)2021 3921 y Fs(S)2025
+4048 y Fe(select)6 b Fc(:)14 b(:)f(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)21 b
+Fb(12)2021 4392 y Fs(T)2025 4524 y Fe(then)11 b Fc(:)j(:)f(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)
+g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)26 b Fb(11)2025 4611 y Fe(time)13 b Fc(:)h(:)f(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)28 b Fb(8)2021 4954 y Fs(U)2025 5081 y
+Fe(until)9 b Fc(:)14 b(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)23 b Fb(10)2021
+5425 y Fs(W)2025 5552 y Fe(while)9 b Fc(:)14 b(:)f(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)23
+b Fb(10)p eop end
+%%Page: 177 183
+TeXDict begin 177 182 bop 150 -116 a Fu(App)s(endix)29
+b(D:)i(Indexes)2623 b(177)150 299 y Fs(D.3)68 b(P)l(arameter)47
+b(and)d(V)-11 b(ariable)46 b(Index)146 955 y(!)150 1073
+y Fe(!)19 b Fc(:)13 b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)33
+b Fb(22)146 1327 y Fs(#)150 1445 y Fe(#)19 b Fc(:)13
+b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)33 b Fb(22)146
+1701 y Fs($)150 1820 y Fe($)19 b Fc(:)13 b(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)33 b Fb(22)150 1909 y Fe($!)16 b Fc(:)e(:)f(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)
+g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)31 b Fb(22)150 1997 y Fe($#)16 b Fc(:)e(:)f(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)31 b Fb(22)150 2085 y Fe($$)16 b Fc(:)e(:)f(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)31 b Fb(22)150 2173 y Fe($*)16
+b Fc(:)e(:)f(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)31 b Fb(22)150
+2261 y Fe($-)16 b Fc(:)e(:)f(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)31
+b Fb(22)150 2350 y Fe($?)16 b Fc(:)e(:)f(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+31 b Fb(22)150 2438 y Fe($@)16 b Fc(:)e(:)f(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g
+(:)31 b Fb(22)150 2526 y Fe($_)16 b Fc(:)e(:)f(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)31 b Fb(73)150 2613 y Fe($0)16 b Fc(:)e(:)f(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)31 b Fb(22)146 2876 y Fs(*)150 2994 y Fe(*)19
+b Fc(:)13 b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)33 b
+Fb(22)146 3248 y Fs({)150 3366 y Fe(-)19 b Fc(:)13 b(:)g(:)g(:)h(:)f(:)
+g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)33 b Fb(22)146 3620 y Fs(?)150 3738
+y Fe(?)19 b Fc(:)13 b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)33
+b Fb(22)146 3992 y Fs(@)150 4110 y Fe(@)19 b Fc(:)13
+b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)33 b Fb(22)p
+156 4364 41 6 v 150 4482 a Fe(_)19 b Fc(:)13 b(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)33 b Fb(73)146 4736 y Fs(0)150 4854 y
+Fe(0)19 b Fc(:)13 b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)33
+b Fb(22)146 5108 y Fs(A)150 5226 y Fe(auto_resume)8 b
+Fc(:)16 b(:)d(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+23 b Fb(110)2021 954 y Fs(B)2025 1074 y Fe(BASH)11 b
+Fc(:)j(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)26 b Fb(74)2025 1163
+y Fe(BASH_ALIASES)8 b Fc(:)15 b(:)f(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)g(:)h(:)22 b Fb(74)2025 1251 y Fe(BASH_ARGC)15
+b Fc(:)g(:)f(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)30 b Fb(74)2025 1340 y Fe(BASH_ARGV)15 b Fc(:)g(:)f(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)30
+b Fb(74)2025 1429 y Fe(BASH_ARGV0)13 b Fc(:)i(:)e(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)27 b Fb(75)2025
+1517 y Fe(BASH_CMDS)15 b Fc(:)g(:)f(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)30 b Fb(75)2025 1606
+y Fe(BASH_COMMAND)8 b Fc(:)15 b(:)f(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)g(:)h(:)22 b Fb(75)2025 1695 y Fe(BASH_COMPAT)10
+b Fc(:)16 b(:)d(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)25 b Fb(75)2025 1783 y Fe(BASH_ENV)18 b Fc(:)d(:)e(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)33
+b Fb(75)2025 1872 y Fe(BASH_EXECUTION_STRING)24 b Fc(:)13
+b(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)34 b Fb(75)2025 1960 y Fe(BASH_LINENO)10
+b Fc(:)16 b(:)d(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)25 b Fb(75)2025 2049 y Fe(BASH_LOADABLES_PATH)7 b
+Fc(:)17 b(:)c(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)22 b Fb(76)2025
+2138 y Fe(BASH_REMATCH)8 b Fc(:)15 b(:)f(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)22 b Fb(76)2025 2226 y Fe(BASH_SOURCE)10
+b Fc(:)16 b(:)d(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)25 b Fb(76)2025 2315 y Fe(BASH_SUBSHELL)g Fc(:)13
+b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)37
+b Fb(76)2025 2403 y Fe(BASH_VERSINFO)25 b Fc(:)13 b(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)37 b Fb(76)2025 2492
+y Fe(BASH_VERSION)8 b Fc(:)15 b(:)f(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)g(:)h(:)22 b Fb(76)2025 2581 y Fe(BASH_XTRACEFD)j
+Fc(:)13 b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)37
+b Fb(76)2025 2669 y Fe(BASHOPTS)18 b Fc(:)d(:)e(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)33 b
+Fb(74)2025 2758 y Fe(BASHPID)22 b Fc(:)13 b(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)35
+b Fb(74)2025 2847 y Fe(bell-style)11 b Fc(:)k(:)e(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)26 b Fb(115)2025
+2935 y Fe(bind-tty-special-chars)14 b Fc(:)k(:)13 b(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)29
+b Fb(115)2025 3022 y Fe(blink-matching-paren)24 b Fc(:)13
+b(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)34 b Fb(115)2021 3297 y Fs(C)2025
+3417 y Fe(CDPATH)6 b Fc(:)14 b(:)f(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)21 b
+Fb(73)2025 3506 y Fe(CHILD_MAX)15 b Fc(:)g(:)f(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)30 b Fb(77)2025
+3595 y Fe(colored-completion-prefix)7 b Fc(:)18 b(:)13
+b(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)22
+b Fb(115)2025 3683 y Fe(colored-stats)h Fc(:)13 b(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)35 b Fb(115)2025 3772 y Fe(COLUMNS)22
+b Fc(:)13 b(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)35 b Fb(77)2025 3860 y Fe(comment-begin)23
+b Fc(:)13 b(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)35
+b Fb(115)2025 3949 y Fe(COMP_CWORD)13 b Fc(:)i(:)e(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)27 b Fb(77)2025
+4038 y Fe(COMP_KEY)18 b Fc(:)d(:)e(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)33 b Fb(77)2025 4126
+y Fe(COMP_LINE)15 b Fc(:)g(:)f(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)30 b Fb(77)2025 4215 y Fe(COMP_POINT)13
+b Fc(:)i(:)e(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)h(:)27 b Fb(77)2025 4303 y Fe(COMP_TYPE)15 b Fc(:)g(:)f(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)30
+b Fb(77)2025 4392 y Fe(COMP_WORDBREAKS)17 b Fc(:)g(:)c(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)32 b Fb(77)2025 4481 y Fe(COMP_WORDS)13
+b Fc(:)i(:)e(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)h(:)27 b Fb(77)2025 4569 y Fe(completion-display-width)9
+b Fc(:)19 b(:)13 b(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)24 b Fb(115)2025 4658 y Fe(completion-ignore-case)14
+b Fc(:)k(:)13 b(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)29 b Fb(116)2025 4747 y Fe(completion-map-case)d
+Fc(:)13 b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)37 b Fb(116)2025 4835
+y Fe(completion-prefix-display-leng)q(th)29 b Fc(:)13
+b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)38 b Fb(116)2025 4924
+y Fe(completion-query-items)14 b Fc(:)k(:)13 b(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)29
+b Fb(116)2025 5012 y Fe(COMPREPLY)15 b Fc(:)g(:)f(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)30 b
+Fb(78)2025 5101 y Fe(convert-meta)25 b Fc(:)13 b(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)38 b Fb(116)2025 5188
+y Fe(COPROC)6 b Fc(:)14 b(:)f(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)21 b Fb(78)p
+eop end
+%%Page: 178 184
+TeXDict begin 178 183 bop 150 -116 a Fu(App)s(endix)29
+b(D:)i(Indexes)2623 b(178)146 294 y Fs(D)150 416 y Fe(DIRSTACK)18
+b Fc(:)d(:)e(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)32 b Fb(78)150 503 y Fe(disable-completion)7
+b Fc(:)18 b(:)13 b(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)22 b Fb(116)146
+791 y Fs(E)150 913 y Fe(echo-control-characters)12 b
+Fc(:)18 b(:)13 b(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)h(:)26 b Fb(116)150 1002 y Fe(editing-mode)f
+Fc(:)14 b(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)37
+b Fb(116)150 1092 y Fe(emacs-mode-string)10 b Fc(:)17
+b(:)c(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)25 b Fb(117)150 1181
+y Fe(EMACS)9 b Fc(:)14 b(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)23 b Fb(78)150
+1270 y Fe(enable-bracketed-paste)14 b Fc(:)k(:)c(:)f(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)29
+b Fb(117)150 1359 y Fe(enable-keypad)23 b Fc(:)13 b(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)35 b Fb(117)150 1449 y Fe(ENV)14
+b Fc(:)f(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)28 b Fb(78)150
+1538 y Fe(EPOCHREALTIME)d Fc(:)13 b(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)37 b Fb(78)150 1627 y Fe(EPOCHSECONDS)8
+b Fc(:)16 b(:)d(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+22 b Fb(78)150 1716 y Fe(EUID)11 b Fc(:)j(:)f(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)25
+b Fb(78)150 1806 y Fe(EXECIGNORE)13 b Fc(:)i(:)e(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)27 b Fb(78)150
+1893 y Fe(expand-tilde)e Fc(:)14 b(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)h(:)37 b Fb(117)146 2180 y Fs(F)150 2303
+y Fe(FCEDIT)6 b Fc(:)15 b(:)e(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)20 b Fb(79)150
+2392 y Fe(FIGNORE)i Fc(:)13 b(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)35 b Fb(79)150
+2481 y Fe(FUNCNAME)18 b Fc(:)d(:)e(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)32 b Fb(79)150 2568
+y Fe(FUNCNEST)18 b Fc(:)d(:)e(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)32 b Fb(79)146 2844 y
+Fs(G)150 2967 y Fe(GLOBIGNORE)13 b Fc(:)i(:)e(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)27 b Fb(79)150
+3054 y Fe(GROUPS)6 b Fc(:)15 b(:)e(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)20 b
+Fb(79)146 3330 y Fs(H)150 3452 y Fe(histchars)15 b Fc(:)h(:)d(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)30
+b Fb(79)150 3542 y Fe(HISTCMD)22 b Fc(:)13 b(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)35
+b Fb(79)150 3631 y Fe(HISTCONTROL)10 b Fc(:)16 b(:)d(:)g(:)g(:)h(:)f(:)
+g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)25 b Fb(80)150
+3720 y Fe(HISTFILE)18 b Fc(:)d(:)e(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)32 b Fb(80)150 3809
+y Fe(HISTFILESIZE)8 b Fc(:)16 b(:)d(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)22 b Fb(80)150 3899 y Fe(HISTIGNORE)13
+b Fc(:)i(:)e(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)27 b Fb(80)150 3988 y Fe(history-preserve-point)14
+b Fc(:)k(:)c(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)29 b Fb(117)150 4077 y Fe(history-size)c
+Fc(:)14 b(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)37
+b Fb(117)150 4166 y Fe(HISTSIZE)18 b Fc(:)d(:)e(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)32 b
+Fb(80)150 4256 y Fe(HISTTIMEFORMAT)23 b Fc(:)13 b(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)34 b Fb(80)150 4345 y Fe(HOME)11
+b Fc(:)j(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)25 b Fb(73)150 4434
+y Fe(horizontal-scroll-mode)14 b Fc(:)k(:)c(:)f(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)29 b Fb(117)150
+4523 y Fe(HOSTFILE)18 b Fc(:)d(:)e(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)32 b Fb(81)150 4613
+y Fe(HOSTNAME)18 b Fc(:)d(:)e(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)32 b Fb(81)150 4700 y
+Fe(HOSTTYPE)18 b Fc(:)d(:)e(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)32 b Fb(81)2021 294 y Fs(I)2025
+420 y Fe(IFS)14 b Fc(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)
+g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)28
+b Fb(73)2025 510 y Fe(IGNOREEOF)15 b Fc(:)g(:)f(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)30 b Fb(81)2025
+600 y Fe(input-meta)11 b Fc(:)k(:)e(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)26 b Fb(118)2025 691 y Fe(INPUTRC)c
+Fc(:)13 b(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)35 b Fb(81)2025 781 y Fe(INSIDE_EMACS)8
+b Fc(:)15 b(:)f(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)
+22 b Fb(81)2025 868 y Fe(isearch-terminators)k Fc(:)13
+b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)37 b Fb(118)2021 1167 y Fs(K)2025
+1290 y Fe(keymap)22 b Fc(:)13 b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)36 b Fb(118)2021
+1601 y Fs(L)2025 1727 y Fe(LANG)11 b Fc(:)j(:)f(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)26
+b Fb(81)2025 1817 y Fe(LC_ALL)6 b Fc(:)14 b(:)f(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)21
+b Fb(81)2025 1907 y Fe(LC_COLLATE)13 b Fc(:)i(:)e(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)27 b Fb(81)2025
+1998 y Fe(LC_CTYPE)18 b Fc(:)d(:)e(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)33 b Fb(81)2025 2088
+y Fe(LC_MESSAGES)21 b Fc(:)13 b(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)34 b Fb(7,)26 b(81)2025 2178 y Fe(LC_NUMERIC)13
+b Fc(:)i(:)e(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)h(:)27 b Fb(82)2025 2269 y Fe(LC_TIME)22 b Fc(:)13
+b(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)35 b Fb(82)2025 2359 y Fe(LINENO)6 b Fc(:)14
+b(:)f(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)
+g(:)g(:)g(:)g(:)g(:)21 b Fb(82)2025 2446 y Fe(LINES)9
+b Fc(:)14 b(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)23 b Fb(82)2021 2746
+y Fs(M)2025 2872 y Fe(MACHTYPE)18 b Fc(:)d(:)e(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)33 b
+Fb(82)2025 2962 y Fe(MAIL)11 b Fc(:)j(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)26
+b Fb(73)2025 3052 y Fe(MAILCHECK)15 b Fc(:)g(:)f(:)f(:)g(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)30 b Fb(82)2025
+3143 y Fe(MAILPATH)18 b Fc(:)d(:)e(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)33 b Fb(73)2025 3233
+y Fe(MAPFILE)22 b Fc(:)13 b(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)
+g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)35 b Fb(82)2025 3323
+y Fe(mark-modified-lines)26 b Fc(:)13 b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)37
+b Fb(118)2025 3414 y Fe(mark-symlinked-directories)27
+b Fc(:)13 b(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+36 b Fb(119)2025 3504 y Fe(match-hidden-files)7 b Fc(:)17
+b(:)d(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)22 b Fb(119)2025 3594
+y Fe(menu-complete-display-prefix)17 b Fc(:)h(:)13 b(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)31 b Fb(119)2025 3681 y Fe(meta-flag)13
+b Fc(:)i(:)e(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)28 b Fb(118)2021 3992 y Fs(O)2025 4118 y Fe(OLDPWD)6
+b Fc(:)14 b(:)f(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)21 b Fb(82)2025 4208 y Fe(OPTARG)6
+b Fc(:)14 b(:)f(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)21 b Fb(73)2025 4299 y Fe(OPTERR)6
+b Fc(:)14 b(:)f(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)21 b Fb(82)2025 4389 y Fe(OPTIND)6
+b Fc(:)14 b(:)f(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)21 b Fb(73)2025 4480 y Fe(OSTYPE)6
+b Fc(:)14 b(:)f(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)21 b Fb(82)2025 4567 y Fe(output-meta)8
+b Fc(:)16 b(:)d(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+23 b Fb(119)p eop end
+%%Page: 179 185
+TeXDict begin 179 184 bop 150 -116 a Fu(App)s(endix)29
+b(D:)i(Indexes)2623 b(179)146 294 y Fs(P)150 410 y Fe(page-completions)
+13 b Fc(:)j(:)d(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)27 b Fb(119)150
+497 y Fe(PATH)11 b Fc(:)j(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)25
+b Fb(73)150 584 y Fe(PIPESTATUS)13 b Fc(:)i(:)e(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)27 b Fb(82)150
+671 y Fe(POSIXLY_CORRECT)17 b Fc(:)g(:)c(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)32 b Fb(82)150 758 y Fe(PPID)11 b Fc(:)j(:)f(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)h(:)25 b Fb(82)150 846 y Fe(PROMPT_COMMAND)e Fc(:)13
+b(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)34
+b Fb(82)150 933 y Fe(PROMPT_DIRTRIM)23 b Fc(:)13 b(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)34 b Fb(83)150 1020 y Fe(PS0)14
+b Fc(:)f(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)28 b Fb(83)150
+1107 y Fe(PS1)14 b Fc(:)f(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)28
+b Fb(73)150 1194 y Fe(PS2)14 b Fc(:)f(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)28
+b Fb(73)150 1281 y Fe(PS3)14 b Fc(:)f(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)28
+b Fb(83)150 1369 y Fe(PS4)14 b Fc(:)f(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)28
+b Fb(83)150 1456 y Fe(PWD)14 b Fc(:)f(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)28
+b Fb(83)146 1689 y Fs(R)150 1804 y Fe(RANDOM)6 b Fc(:)15
+b(:)e(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)20 b Fb(83)150 1892 y Fe(READLINE_LINE)25
+b Fc(:)13 b(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)37
+b Fb(83)150 1979 y Fe(READLINE_MARK)25 b Fc(:)13 b(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)37 b Fb(83)150 2066 y
+Fe(READLINE_POINT)23 b Fc(:)13 b(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)34 b Fb(83)150 2153 y Fe(REPLY)9 b Fc(:)14
+b(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)23 b Fb(83)150 2240 y Fe(revert-all-at-newline)
+17 b Fc(:)h(:)13 b(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)32 b Fb(119)146 2473 y Fs(S)150
+2589 y Fe(SECONDS)22 b Fc(:)13 b(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)35 b Fb(83)150
+2676 y Fe(SHELL)9 b Fc(:)14 b(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)23
+b Fb(83)150 2763 y Fe(SHELLOPTS)15 b Fc(:)h(:)d(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)30 b Fb(83)150
+2851 y Fe(SHLVL)9 b Fc(:)14 b(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)23
+b Fb(84)150 2938 y Fe(show-all-if-ambiguous)17 b Fc(:)h(:)13
+b(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)32 b Fb(119)150 3025 y Fe(show-all-if-unmodified)14
+b Fc(:)k(:)c(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)29 b Fb(119)150 3112 y Fe(show-mode-in-prompt)d
+Fc(:)13 b(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)37 b Fb(120)2025 260 y
+Fe(skip-completed-text)26 b Fc(:)13 b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)37
+b Fb(120)2025 347 y Fe(SRANDOM)22 b Fc(:)13 b(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)35
+b Fb(84)2021 669 y Fs(T)2025 798 y Fe(TEXTDOMAIN)15 b
+Fc(:)g(:)e(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)30 b Fb(7)2025 889 y Fe(TEXTDOMAINDIR)7 b Fc(:)16
+b(:)d(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)23
+b Fb(7)2025 981 y Fe(TIMEFORMAT)13 b Fc(:)i(:)e(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)27 b Fb(84)2025
+1072 y Fe(TMOUT)9 b Fc(:)14 b(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)23
+b Fb(84)2025 1159 y Fe(TMPDIR)6 b Fc(:)14 b(:)f(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)21
+b Fb(85)2021 1481 y Fs(U)2025 1606 y Fe(UID)14 b Fc(:)f(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)28 b Fb(85)2021 1928 y Fs(V)2025 2057
+y Fe(vi-cmd-mode-string)7 b Fc(:)17 b(:)d(:)f(:)g(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)22
+b Fb(120)2025 2148 y Fe(vi-ins-mode-string)7 b Fc(:)17
+b(:)d(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)22 b Fb(120)2025 2235
+y Fe(visible-stats)h Fc(:)13 b(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)35 b Fb(120)150 3751 y Fs(D.4)68 b(F)-11 b(unction)44
+b(Index)146 4237 y(A)150 4354 y Fe(abort)27 b(\(C-g\))15
+b Fc(:)f(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)30
+b Fb(135)150 4442 y Fe(accept-line)e(\(Newline)g(or)e(Return\))12
+b Fc(:)i(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)27
+b Fb(128)150 4529 y Fe(alias-expand-line)i(\(\))9 b Fc(:)14
+b(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)24 b Fb(137)146 4784 y Fs(B)150
+4902 y Fe(backward-char)29 b(\(C-b\))12 b Fc(:)i(:)f(:)g(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)26 b Fb(127)150 4989 y Fe(backward-delete-char)k(\(Rubout\))22
+b Fc(:)13 b(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)35
+b Fb(130)150 5077 y Fe(backward-kill-line)30 b(\(C-x)c(Rubout\))e
+Fc(:)13 b(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)37 b
+Fb(131)150 5165 y Fe(backward-kill-word)30 b(\(M-DEL\))11
+b Fc(:)j(:)f(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+26 b Fb(131)150 5252 y Fe(backward-word)j(\(M-b\))12
+b Fc(:)i(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)26 b Fb(127)150 5340
+y Fe(beginning-of-history)k(\(M-<\))11 b Fc(:)j(:)f(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)26 b Fb(128)2025
+4206 y Fe(beginning-of-line)j(\(C-a\))20 b Fc(:)13 b(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)34
+b Fb(127)2025 4294 y Fe(bracketed-paste-begin)c(\(\))16
+b Fc(:)e(:)f(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)
+g(:)g(:)31 b Fb(130)2021 4589 y Fs(C)2025 4713 y Fe
+(call-last-kbd-macro)f(\(C-x)c(e\))15 b Fc(:)f(:)f(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)30 b Fb(134)2025 4802
+y Fe(capitalize-word)f(\(M-c\))7 b Fc(:)14 b(:)f(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)22
+b Fb(131)2025 4892 y Fe(character-search)29 b(\(C-]\))22
+b Fc(:)13 b(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)36 b Fb(135)2025 4982 y Fe
+(character-search-backward)31 b(\(M-C-]\))10 b Fc(:)15
+b(:)e(:)g(:)g(:)g(:)h(:)f(:)g(:)25 b Fb(135)2025 5071
+y Fe(clear-display)j(\(M-C-l\))7 b Fc(:)15 b(:)e(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)22
+b Fb(128)2025 5161 y Fe(clear-screen)28 b(\(C-l\))14
+b Fc(:)h(:)e(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)29 b Fb(128)2025
+5250 y Fe(complete)e(\(TAB\))7 b Fc(:)15 b(:)e(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)22 b Fb(133)2025 5340 y Fe(complete-command)29
+b(\(M-!\))22 b Fc(:)13 b(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)36 b Fb(134)p eop end
+%%Page: 180 186
+TeXDict begin 180 185 bop 150 -116 a Fu(App)s(endix)29
+b(D:)i(Indexes)2623 b(180)150 264 y Fe(complete-filename)29
+b(\(M-/\))20 b Fc(:)13 b(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)33 b Fb(133)150 353 y Fe(complete-hostname)
+c(\(M-@\))20 b Fc(:)13 b(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)33 b Fb(134)150 442 y Fe
+(complete-into-braces)d(\(M-{\))11 b Fc(:)j(:)f(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)26 b Fb(134)150 531
+y Fe(complete-username)j(\(M-~\))20 b Fc(:)13 b(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)33
+b Fb(133)150 621 y Fe(complete-variable)c(\(M-$\))20
+b Fc(:)13 b(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)33 b Fb(134)150 710 y Fe(copy-backward-word)d(\(\))7
+b Fc(:)13 b(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)21 b Fb(132)150 799 y Fe(copy-forward-word)
+29 b(\(\))9 b Fc(:)14 b(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)24 b Fb(132)150
+887 y Fe(copy-region-as-kill)30 b(\(\))22 b Fc(:)13 b(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)36
+b Fb(132)146 1175 y Fs(D)150 1298 y Fe(dabbrev-expand)29
+b(\(\))17 b Fc(:)c(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)32
+b Fb(134)150 1387 y Fe(delete-char)c(\(C-d\))17 b Fc(:)d(:)f(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)32 b Fb(130)150 1476 y Fe(delete-char-or-list)e
+(\(\))22 b Fc(:)13 b(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)36 b Fb(133)150 1566 y Fe
+(delete-horizontal-space)31 b(\(\))11 b Fc(:)i(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)26 b Fb(132)150
+1655 y Fe(digit-argument)j(\()p Fd(M-0)p Fe(,)e Fd(M-1)p
+Fe(,)f(...)g Fd(M--)p Fe(\))11 b Fc(:)j(:)f(:)h(:)f(:)g(:)g(:)g(:)g(:)
+26 b Fb(132)150 1744 y Fe(display-shell-version)k(\(C-x)d(C-v\))c
+Fc(:)13 b(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)37 b
+Fb(136)150 1825 y Fe(do-lowercase-version)30 b(\(M-A,)227
+1912 y(M-B,)c(M-)p Fd(x)p Fe(,)h(...\))10 b Fc(:)k(:)f(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)
+g(:)g(:)g(:)g(:)g(:)25 b Fb(135)150 2001 y Fe(downcase-word)k(\(M-l\))
+12 b Fc(:)i(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)26 b Fb(131)150 2090
+y Fe(dump-functions)j(\(\))17 b Fc(:)c(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+32 b Fb(136)150 2180 y Fe(dump-macros)c(\(\))7 b Fc(:)14
+b(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)22
+b Fb(136)150 2269 y Fe(dump-variables)29 b(\(\))17 b
+Fc(:)c(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)32 b Fb(136)150
+2356 y Fe(dynamic-complete-history)f(\(M-TAB\))13 b Fc(:)i(:)e(:)g(:)g
+(:)g(:)g(:)g(:)g(:)h(:)27 b Fb(134)146 2645 y Fs(E)150
+2767 y Fe(edit-and-execute-command)k(\(C-x)c(C-e\))14
+b Fc(:)g(:)f(:)g(:)g(:)h(:)f(:)g(:)29 b Fb(137)150 2857
+y Fe(end-kbd-macro)g(\(C-x)d(\)\))13 b Fc(:)h(:)f(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)28
+b Fb(134)150 2946 y Fd(end-of-file)g Fe(\(usually)g(C-d\))21
+b Fc(:)13 b(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)35 b Fb(130)150 3035 y Fe(end-of-history)29 b(\(M->\))9
+b Fc(:)14 b(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)24 b Fb(128)150 3124 y
+Fe(end-of-line)k(\(C-e\))17 b Fc(:)d(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)32
+b Fb(127)150 3212 y Fe(exchange-point-and-mark)f(\(C-x)26
+b(C-x\))17 b Fc(:)d(:)g(:)f(:)g(:)g(:)g(:)g(:)g(:)32
+b Fb(135)146 3500 y Fs(F)150 3623 y Fe(forward-backward-delete-char)g
+(\(\))15 b Fc(:)f(:)f(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)30
+b Fb(130)150 3712 y Fe(forward-char)e(\(C-f\))14 b Fc(:)h(:)e(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)29 b Fb(127)150 3801 y Fe(forward-search-history)i
+(\(C-s\))24 b Fc(:)13 b(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)38 b Fb(128)150 3889 y Fe(forward-word)28 b(\(M-f\))14
+b Fc(:)h(:)e(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)29 b Fb(127)146 4167
+y Fs(G)150 4289 y Fe(glob-complete-word)h(\(M-g\))16
+b Fc(:)e(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)31 b Fb(136)150 4379 y Fe(glob-expand-word)e(\(C-x)e(*\))c
+Fc(:)13 b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)38 b Fb(136)150 4466 y Fe(glob-list-expansions)30
+b(\(C-x)d(g\))13 b Fc(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)h(:)27 b Fb(136)2021 294 y Fs(H)2025 422 y Fe
+(history-and-alias-expand-line)32 b(\(\))13 b Fc(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)28 b Fb(137)2025 513 y Fe(history-expand-line)i
+(\(M-^\))13 b Fc(:)h(:)g(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)h(:)28 b Fb(136)2025 604 y Fe(history-search-backward)j
+(\(\))11 b Fc(:)i(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)26 b Fb(129)2025 695 y Fe(history-search-forward)k(\(\))13
+b Fc(:)h(:)g(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+h(:)28 b Fb(129)2025 786 y Fe(history-substring-search-backw)q(ard)k
+(\(\))20 b Fc(:)13 b(:)g(:)g(:)g(:)35 b Fb(129)2025 874
+y Fe(history-substring-search-forwa)q(rd)d(\(\))22 b
+Fc(:)13 b(:)h(:)f(:)g(:)g(:)37 b Fb(129)2021 1200 y Fs(I)2025
+1329 y Fe(insert-comment)29 b(\(M-#\))9 b Fc(:)14 b(:)f(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+24 b Fb(136)2025 1420 y Fe(insert-completions)29 b(\(M-*\))16
+b Fc(:)f(:)e(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)
+g(:)g(:)31 b Fb(133)2025 1507 y Fe(insert-last-argument)f(\(M-.)c(or)g
+(M-_\))7 b Fc(:)14 b(:)f(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)22
+b Fb(137)2021 1834 y Fs(K)2025 1962 y Fe(kill-line)27
+b(\(C-k\))c Fc(:)14 b(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)37
+b Fb(131)2025 2053 y Fe(kill-region)28 b(\(\))7 b Fc(:)14
+b(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)22
+b Fb(132)2025 2144 y Fe(kill-whole-line)29 b(\(\))14
+b Fc(:)g(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)29 b Fb(131)2025
+2231 y Fe(kill-word)e(\(M-d\))c Fc(:)14 b(:)f(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)
+g(:)g(:)g(:)37 b Fb(131)2021 2548 y Fs(M)2025 2676 y
+Fe(magic-space)28 b(\(\))7 b Fc(:)14 b(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)22 b Fb(137)2025 2767 y Fe(menu-complete)28
+b(\(\))20 b Fc(:)13 b(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)34
+b Fb(133)2025 2854 y Fe(menu-complete-backward)c(\(\))13
+b Fc(:)h(:)g(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+h(:)28 b Fb(133)2021 3181 y Fs(N)2025 3309 y Fe(next-history)g(\(C-n\))
+14 b Fc(:)h(:)e(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)29 b Fb(128)2025
+3401 y Fe(next-screen-line)g(\(\))12 b Fc(:)h(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+27 b Fb(128)2025 3472 y Fe(non-incremental-forward-)2102
+3560 y(search-history)h(\(M-n\))23 b Fc(:)14 b(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)37
+b Fb(129)2025 3647 y Fe(non-incremental-reverse-)2102
+3734 y(search-history)28 b(\(M-p\))23 b Fc(:)14 b(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)37
+b Fb(128)2021 4070 y Fs(O)2025 4198 y Fe(operate-and-get-next)30
+b(\(C-o\))11 b Fc(:)j(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)26 b Fb(129)2025 4285 y Fe(overwrite-mode)j(\(\))17
+b Fc(:)c(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)32 b Fb(131)p
+eop end
+%%Page: 181 187
+TeXDict begin 181 186 bop 150 -116 a Fu(App)s(endix)29
+b(D:)i(Indexes)2623 b(181)146 294 y Fs(P)150 411 y Fe
+(possible-command-completions)32 b(\(C-x)26 b(!\))9 b
+Fc(:)14 b(:)g(:)f(:)g(:)g(:)24 b Fb(134)150 499 y Fe
+(possible-completions)30 b(\(M-?\))11 b Fc(:)j(:)f(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)26 b Fb(133)150
+586 y Fe(possible-filename-completions)32 b(\(C-x)27
+b(/\))7 b Fc(:)13 b(:)g(:)g(:)g(:)22 b Fb(133)150 674
+y Fe(possible-hostname-completions)32 b(\(C-x)27 b(@\))7
+b Fc(:)13 b(:)g(:)g(:)g(:)22 b Fb(134)150 762 y Fe
+(possible-username-completions)32 b(\(C-x)27 b(~\))7
+b Fc(:)13 b(:)g(:)g(:)g(:)22 b Fb(133)150 849 y Fe
+(possible-variable-completions)32 b(\(C-x)27 b($\))7
+b Fc(:)13 b(:)g(:)g(:)g(:)22 b Fb(134)150 937 y Fe(prefix-meta)28
+b(\(ESC\))17 b Fc(:)d(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)32
+b Fb(135)150 1025 y Fe(previous-history)d(\(C-p\))23
+b Fc(:)13 b(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)36 b Fb(128)150 1112 y Fe(previous-screen-line)30
+b(\(\))19 b Fc(:)13 b(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)33 b Fb(127)150 1199 y Fe
+(print-last-kbd-macro)d(\(\))19 b Fc(:)13 b(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)33 b Fb(134)146
+1453 y Fs(Q)150 1570 y Fe(quoted-insert)c(\(C-q)d(or)g(C-v\))8
+b Fc(:)14 b(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)22 b Fb(130)146 1824 y Fs(R)150 1941 y Fe(re-read-init-file)29
+b(\(C-x)e(C-r\))15 b Fc(:)f(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)30 b Fb(135)150 2029 y Fe(redraw-current-line)g(\(\))22
+b Fc(:)13 b(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)36 b Fb(128)150 2117 y Fe(reverse-search-history)31
+b(\(C-r\))24 b Fc(:)13 b(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)38 b Fb(128)150 2204 y Fe(revert-line)28 b(\(M-r\))17
+b Fc(:)d(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)32 b Fb(135)146
+2447 y Fs(S)150 2565 y Fe(self-insert)c(\(a,)e(b,)g(A,)g(1,)h(!,)f
+(...\))13 b Fc(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)27
+b Fb(130)150 2652 y Fe(set-mark)g(\(C-@\))7 b Fc(:)15
+b(:)e(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)22
+b Fb(135)150 2740 y Fe(shell-backward-kill-word)31 b(\(\))8
+b Fc(:)14 b(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+23 b Fb(131)150 2828 y Fe(shell-backward-word)30 b(\(M-C-b\))8
+b Fc(:)15 b(:)e(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+23 b Fb(127)150 2915 y Fe(shell-expand-line)29 b(\(M-C-e\))13
+b Fc(:)j(:)d(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)
+g(:)28 b Fb(136)150 3003 y Fe(shell-forward-word)i(\(M-C-f\))11
+b Fc(:)j(:)f(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+26 b Fb(127)150 3091 y Fe(shell-kill-word)j(\(M-C-d\))20
+b Fc(:)13 b(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)33 b Fb(131)150 3178 y Fe(shell-transpose-words)d
+(\(M-C-t\))22 b Fc(:)13 b(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)35 b Fb(132)2025 264 y Fe(skip-csi-sequence)29 b(\(\))9
+b Fc(:)14 b(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)24 b Fb(135)2025 351 y
+Fe(start-kbd-macro)29 b(\(C-x)d(\(\))8 b Fc(:)14 b(:)f(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)23
+b Fb(134)2021 819 y Fs(T)2025 970 y Fe(tilde-expand)28
+b(\(M-&\))14 b Fc(:)h(:)e(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)29
+b Fb(135)2025 1068 y Fe(transpose-chars)g(\(C-t\))7 b
+Fc(:)14 b(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)22 b Fb(130)2025 1155 y Fe(transpose-words)
+29 b(\(M-t\))7 b Fc(:)14 b(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)22 b Fb(130)2021
+1634 y Fs(U)2025 1784 y Fe(undo)k(\(C-_)h(or)f(C-x)g(C-u\))10
+b Fc(:)k(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)25 b Fb(135)2025 1883 y Fe
+(universal-argument)k(\(\))7 b Fc(:)14 b(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)22
+b Fb(132)2025 1981 y Fe(unix-filename-rubout)30 b(\(\))19
+b Fc(:)13 b(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)34 b Fb(132)2025 2080 y Fe(unix-line-discard)29
+b(\(C-u\))20 b Fc(:)13 b(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)g(:)34 b Fb(131)2025 2178 y Fe
+(unix-word-rubout)29 b(\(C-w\))22 b Fc(:)13 b(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)36
+b Fb(132)2025 2265 y Fe(upcase-word)28 b(\(M-u\))17 b
+Fc(:)d(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)32 b Fb(131)2021
+2744 y Fs(Y)2025 2894 y Fe(yank)26 b(\(C-y\))18 b Fc(:)c(:)f(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)33
+b Fb(132)2025 2993 y Fe(yank-last-arg)28 b(\(M-.)f(or)f(M-_\))8
+b Fc(:)13 b(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)h(:)22 b Fb(129)2025 3091 y Fe(yank-nth-arg)28 b(\(M-C-y\))9
+b Fc(:)15 b(:)e(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)24 b Fb(129)2025 3178
+y Fe(yank-pop)j(\(M-y\))7 b Fc(:)15 b(:)e(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)22 b Fb(132)150 3927 y Fs(D.5)68 b(Concept)45
+b(Index)146 4520 y(A)150 4646 y Fb(alias)27 b(expansion)7
+b Fc(:)14 b(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)21
+b Fb(94)150 4736 y(arithmetic)26 b(ev)l(aluation)d Fc(:)13
+b(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)37 b Fb(93)150 4826 y(arithmetic)26
+b(expansion)11 b Fc(:)j(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)26
+b Fb(31)150 4917 y(arithmetic,)h(shell)6 b Fc(:)14 b(:)f(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)20 b Fb(93)150 5004
+y(arra)n(ys)h Fc(:)14 b(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)35 b Fb(95)2021
+4520 y Fs(B)2025 4644 y Fb(bac)n(kground)13 b Fc(:)f(:)h(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)28 b Fb(107)2025
+4733 y(Bash)e(con\014guration)11 b Fc(:)j(:)f(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)26 b Fb(152)2025 4823 y(Bash)g(installation)9
+b Fc(:)15 b(:)e(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)24
+b Fb(152)2025 4913 y(Bourne)i(shell)20 b Fc(:)13 b(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)35 b
+Fb(5)2025 5002 y(brace)26 b(expansion)9 b Fc(:)k(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)24 b Fb(23)2025 5089 y(builtin)15
+b Fc(:)e(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)
+g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)30 b Fb(3)p eop end
+%%Page: 182 188
+TeXDict begin 182 187 bop 150 -116 a Fu(App)s(endix)29
+b(D:)i(Indexes)2623 b(182)146 294 y Fs(C)150 415 y Fb(command)26
+b(editing)19 b Fc(:)14 b(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)34
+b Fb(112)150 503 y(command)26 b(execution)12 b Fc(:)h(:)g(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)26 b Fb(39)150 592 y(command)g(expansion)c
+Fc(:)13 b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)36 b Fb(39)150
+681 y(command)26 b(history)18 b Fc(:)13 b(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)33 b Fb(146)150 770 y(command)26 b(searc)n(h)16
+b Fc(:)d(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)30
+b Fb(39)150 859 y(command)c(substitution)21 b Fc(:)13
+b(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)35 b Fb(31)150 947 y(command)26
+b(timing)13 b Fc(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)28 b Fb(8)150 1036 y(commands,)e(comp)r(ound)c Fc(:)13
+b(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)37 b Fb(10)150 1125 y(commands,)26
+b(conditional)10 b Fc(:)15 b(:)e(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)25
+b Fb(11)150 1214 y(commands,)h(grouping)15 b Fc(:)f(:)f(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)
+g(:)g(:)g(:)29 b Fb(15)150 1302 y(commands,)d(lists)12
+b Fc(:)j(:)e(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)27
+b Fb(9)150 1391 y(commands,)f(lo)r(oping)e Fc(:)13 b(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)37 b Fb(10)150 1480 y(commands,)26
+b(pip)r(elines)18 b Fc(:)c(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)33
+b Fb(8)150 1569 y(commands,)26 b(shell)c Fc(:)13 b(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)36 b Fb(8)150 1657 y(commands,)26
+b(simple)e Fc(:)13 b(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)38
+b Fb(8)150 1746 y(commen)n(ts,)26 b(shell)13 b Fc(:)i(:)e(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)28 b Fb(7)150
+1835 y(Compatibilit)n(y)f(Lev)n(el)10 b Fc(:)j(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)25 b Fb(104)150 1924 y(Compatibilit)n(y)i(Mo)r(de)22
+b Fc(:)13 b(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)36 b Fb(104)150
+2013 y(completion)27 b(builtins)21 b Fc(:)13 b(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)36 b Fb(139)150 2101 y(con\014guration)22 b Fc(:)13
+b(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)36
+b Fb(152)150 2190 y(con)n(trol)26 b(op)r(erator)8 b Fc(:)15
+b(:)e(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)23
+b Fb(3)150 2277 y(copro)r(cess)18 b Fc(:)c(:)f(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)32 b
+Fb(15)146 2553 y Fs(D)150 2672 y Fb(directory)26 b(stac)n(k)11
+b Fc(:)i(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)26
+b Fb(97)146 2948 y Fs(E)150 3069 y Fb(editing)g(command)g(lines)17
+b Fc(:)d(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)g(:)32 b Fb(112)150 3158 y(en)n(vironmen)n(t)18
+b Fc(:)12 b(:)h(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)32 b Fb(41)150 3247 y(ev)l(aluation,)26 b(arithmetic)12
+b Fc(:)i(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)26 b Fb(93)150 3335
+y(ev)n(en)n(t)f(designators)c Fc(:)13 b(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+g(:)h(:)34 b Fb(149)150 3424 y(execution)26 b(en)n(vironmen)n(t)17
+b Fc(:)12 b(:)h(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)31 b Fb(40)150 3513
+y(exit)25 b(status)7 b Fc(:)14 b(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)22 b Fb(3,)k(41)150 3602 y(expansion)9
+b Fc(:)14 b(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)24 b Fb(22)150 3691 y(expansion,)i(arithmetic)18
+b Fc(:)c(:)f(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)
+g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)32 b Fb(31)150 3779
+y(expansion,)26 b(brace)16 b Fc(:)d(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)30 b Fb(23)150 3868 y(expansion,)c(\014lename)18
+b Fc(:)13 b(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)32 b Fb(33)150
+3957 y(expansion,)26 b(parameter)21 b Fc(:)13 b(:)g(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)
+g(:)34 b Fb(25)150 4046 y(expansion,)26 b(pathname)7
+b Fc(:)13 b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)22 b Fb(33)150
+4134 y(expansion,)k(tilde)14 b Fc(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)28 b Fb(24)150 4223 y(expressions,)f(arithmetic)13
+b Fc(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)27 b Fb(93)150 4310 y(expressions,)g
+(conditional)17 b Fc(:)d(:)g(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)32 b Fb(91)2021
+294 y Fs(F)2025 415 y Fb(\014eld)21 b Fc(:)13 b(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)h(:)36 b Fb(3)2025 504 y(\014lename)21 b Fc(:)14 b(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)36
+b Fb(3)2025 593 y(\014lename)26 b(expansion)11 b Fc(:)i(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)26 b Fb(33)2025 682 y(foreground)9
+b Fc(:)14 b(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)24 b Fb(107)2025 769 y(functions,)i(shell)9 b
+Fc(:)14 b(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)24
+b Fb(18)2021 1048 y Fs(H)2025 1170 y Fb(history)h(builtins)20
+b Fc(:)13 b(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)35
+b Fb(146)2025 1259 y(history)25 b(ev)n(en)n(ts)8 b Fc(:)13
+b(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)23
+b Fb(149)2025 1347 y(history)i(expansion)14 b Fc(:)g(:)f(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)29 b Fb(148)2025 1436 y(history)c(list)9
+b Fc(:)15 b(:)e(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)
+g(:)g(:)24 b Fb(146)2025 1524 y(History)-6 b(,)25 b(ho)n(w)h(to)g(use)
+19 b Fc(:)13 b(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)34 b Fb(145)2021
+1803 y Fs(I)2025 1924 y Fb(iden)n(ti\014er)12 b Fc(:)g(:)h(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)27
+b Fb(3)2025 2013 y(initialization)h(\014le,)e(readline)17
+b Fc(:)d(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)32 b Fb(114)2025 2102 y(installation)21
+b Fc(:)13 b(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)34 b Fb(152)2025 2191 y(in)n(teraction,)26 b(readline)7
+b Fc(:)15 b(:)e(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)22 b Fb(111)2025
+2280 y(in)n(teractiv)n(e)k(shell)20 b Fc(:)13 b(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)34 b Fb(88,)27 b(89)2025 2367 y(in)n(ternationalization)22
+b Fc(:)13 b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)35
+b Fb(7)2021 2637 y Fs(J)2025 2758 y Fb(job)23 b Fc(:)13
+b(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)38 b Fb(3)2025 2845
+y(job)26 b(con)n(trol)17 b Fc(:)d(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)31 b Fb(3,)c(107)2021 3124 y Fs(K)2025
+3246 y Fb(kill)f(ring)7 b Fc(:)14 b(:)f(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)22 b Fb(113)2025
+3333 y(killing)k(text)6 b Fc(:)13 b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)21 b Fb(113)2021 3612
+y Fs(L)2025 3733 y Fb(lo)r(calization)i Fc(:)13 b(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)35
+b Fb(7)2025 3821 y(login)26 b(shell)6 b Fc(:)15 b(:)e(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)21
+b Fb(88)2021 4100 y Fs(M)2025 4221 y Fb(matc)n(hing,)26
+b(pattern)9 b Fc(:)k(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)24
+b Fb(33)2025 4308 y(metac)n(haracter)7 b Fc(:)14 b(:)f(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)22 b Fb(3)p
+eop end
+%%Page: 183 189
+TeXDict begin 183 188 bop 150 -116 a Fu(App)s(endix)29
+b(D:)i(Indexes)2623 b(183)146 294 y Fs(N)150 410 y Fb(name)19
+b Fc(:)14 b(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)34 b Fb(3)150 497
+y(nativ)n(e)25 b(languages)c Fc(:)13 b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)34 b Fb(7)150 584 y(notation,)27
+b(readline)13 b Fc(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)27
+b Fb(112)146 828 y Fs(O)150 944 y Fb(op)r(erator,)g(shell)c
+Fc(:)13 b(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+37 b Fb(3)146 1187 y Fs(P)150 1303 y Fb(parameter)26
+b(expansion)13 b Fc(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)28
+b Fb(25)150 1390 y(parameters)c Fc(:)13 b(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)37 b Fb(20)150
+1478 y(parameters,)27 b(p)r(ositional)7 b Fc(:)15 b(:)e(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)21 b Fb(21)150 1565 y(parameters,)27 b(sp)r(ecial)7
+b Fc(:)14 b(:)f(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)21
+b Fb(21)150 1652 y(pathname)k(expansion)18 b Fc(:)c(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)32 b Fb(33)150 1739 y(pattern)25 b(matc)n(hing)c
+Fc(:)13 b(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)34
+b Fb(33)150 1827 y(pip)r(eline)12 b Fc(:)h(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)27
+b Fb(8)150 1914 y(POSIX)22 b Fc(:)13 b(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)38
+b Fb(3)150 2001 y(POSIX)25 b(Mo)r(de)14 b Fc(:)g(:)f(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)29 b Fb(101)150 2088
+y(pro)r(cess)e(group)15 b Fc(:)e(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)30 b Fb(3)150 2176 y(pro)r(cess)d(group)e
+(ID)11 b Fc(:)i(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)26
+b Fb(3)150 2263 y(pro)r(cess)h(substitution)11 b Fc(:)h(:)i(:)f(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)25 b Fb(32)150 2350 y(programmable)i(completion)8
+b Fc(:)14 b(:)g(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)23 b Fb(137)150 2437 y(prompting)17
+b Fc(:)c(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)31 b Fb(98)146 2681 y Fs(Q)150 2797 y Fb(quoting)16
+b Fc(:)d(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)31 b Fb(6)150 2884 y(quoting,)26
+b(ANSI)18 b Fc(:)13 b(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)34 b Fb(6)146 3127 y Fs(R)150 3243 y Fb(Readline,)26
+b(ho)n(w)g(to)g(use)11 b Fc(:)i(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)26
+b Fb(110)150 3331 y(redirection)13 b Fc(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g
+(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)
+g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)27 b Fb(35)150
+3418 y(reserv)n(ed)f(w)n(ord)13 b Fc(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)28 b Fb(3)150 3505
+y(reserv)n(ed)e(w)n(ords)15 b Fc(:)f(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)
+g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)30 b Fb(8)150 3592 y(restricted)c(shell)12
+b Fc(:)i(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)27
+b Fb(100)150 3679 y(return)e(status)10 b Fc(:)k(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)25 b Fb(4)2021
+294 y Fs(S)2025 430 y Fb(shell)h(arithmetic)17 b Fc(:)d(:)f(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)31 b Fb(93)2025 524
+y(shell)26 b(function)18 b Fc(:)13 b(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)h(:)32 b Fb(18)2025 617 y(shell)26
+b(script)10 b Fc(:)k(:)f(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)25 b Fb(42)2025 711 y(shell)h(v)l(ariable)7
+b Fc(:)14 b(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)22 b Fb(20)2025 805 y(shell,)k(in)n(teractiv)n(e)21
+b Fc(:)13 b(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
+(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)34
+b Fb(89)2025 899 y(signal)13 b Fc(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)28
+b Fb(4)2025 992 y(signal)f(handling)6 b Fc(:)13 b(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)21 b Fb(42)2025 1086
+y(sp)r(ecial)27 b(builtin)16 b Fc(:)d(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h
+(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)31 b Fb(4,)26 b(72)2025 1180 y(startup)f(\014les)10
+b Fc(:)k(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
+g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
+(:)g(:)25 b Fb(88)2025 1267 y(susp)r(ending)g(jobs)10
+b Fc(:)k(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)25
+b Fb(107)2021 1647 y Fs(T)2025 1783 y Fb(tilde)h(expansion)7
+b Fc(:)13 b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)22
+b Fb(24)2025 1877 y(tok)n(en)17 b Fc(:)12 b(:)i(:)f(:)g(:)g(:)g(:)g(:)g
+(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)
+f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)32
+b Fb(4)2025 1964 y(translation,)27 b(nativ)n(e)e(languages)c
+Fc(:)13 b(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)34 b Fb(7)2021 2344 y Fs(V)2025 2480 y
+Fb(v)l(ariable,)26 b(shell)14 b Fc(:)g(:)f(:)g(:)g(:)g(:)g(:)h(:)f(:)g
+(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
+g(:)g(:)g(:)h(:)f(:)g(:)g(:)28 b Fb(20)2025 2567 y(v)l(ariables,)f
+(readline)7 b Fc(:)13 b(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)22
+b Fb(115)2021 2947 y Fs(W)2025 3083 y Fb(w)n(ord)10 b
+Fc(:)j(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
+(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
+g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)25 b Fb(4)2025 3170
+y(w)n(ord)h(splitting)9 b Fc(:)14 b(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)24 b Fb(32)2021 3550 y Fs(Y)2025
+3679 y Fb(y)n(anking)h(text)13 b Fc(:)f(:)h(:)g(:)g(:)h(:)f(:)g(:)g(:)g
+(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)
+g(:)h(:)f(:)g(:)g(:)g(:)g(:)28 b Fb(113)p eop end
+%%Trailer
+
+userdict /end-hook known{end-hook}if
+%%EOF
diff --git a/doc/bashref.texi b/doc/bashref.texi
new file mode 100644
index 0000000..9e23f58
--- /dev/null
+++ b/doc/bashref.texi
@@ -0,0 +1,9576 @@
+\input texinfo.tex @c -*- texinfo -*-
+@c %**start of header
+@setfilename bashref.info
+@settitle Bash Reference Manual
+
+@include version.texi
+@c %**end of header
+
+@copying
+This text is a brief description of the features that are present in
+the Bash shell (version @value{VERSION}, @value{UPDATED}).
+
+This is Edition @value{EDITION}, last updated @value{UPDATED},
+of @cite{The GNU Bash Reference Manual},
+for @code{Bash}, Version @value{VERSION}.
+
+Copyright @copyright{} 1988--2020 Free Software Foundation, Inc.
+
+@quotation
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.3 or
+any later version published by the Free Software Foundation; with no
+Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.
+A copy of the license is included in the section entitled
+``GNU Free Documentation License''.
+@end quotation
+@end copying
+
+@defcodeindex bt
+@defcodeindex rw
+@set BashFeatures
+
+@dircategory Basics
+@direntry
+* Bash: (bash).                     The GNU Bourne-Again SHell.
+@end direntry
+
+@finalout
+
+@titlepage
+@title Bash Reference Manual
+@subtitle Reference Documentation for Bash
+@subtitle Edition @value{EDITION}, for @code{Bash} Version @value{VERSION}.
+@subtitle @value{UPDATED-MONTH}
+@author Chet Ramey, Case Western Reserve University
+@author Brian Fox, Free Software Foundation
+
+@page
+@vskip 0pt plus 1filll
+@insertcopying
+
+@end titlepage
+
+@contents
+
+@ifnottex
+@node Top, Introduction, (dir), (dir)
+@top Bash Features
+
+This text is a brief description of the features that are present in
+the Bash shell (version @value{VERSION}, @value{UPDATED}).
+The Bash home page is @url{http://www.gnu.org/software/bash/}.
+
+This is Edition @value{EDITION}, last updated @value{UPDATED},
+of @cite{The GNU Bash Reference Manual},
+for @code{Bash}, Version @value{VERSION}.
+
+Bash contains features that appear in other popular shells, and some
+features that only appear in Bash.  Some of the shells that Bash has
+borrowed concepts from are the Bourne Shell (@file{sh}), the Korn Shell
+(@file{ksh}), and the C-shell (@file{csh} and its successor,
+@file{tcsh}).  The following menu breaks the features up into
+categories, noting which features were inspired by other shells and
+which are specific to Bash.
+
+This manual is meant as a brief introduction to features found in
+Bash.  The Bash manual page should be used as the definitive
+reference on shell behavior.
+
+@menu
+* Introduction::		An introduction to the shell.
+* Definitions::			Some definitions used in the rest of this
+				manual.
+* Basic Shell Features::	The shell "building blocks".
+* Shell Builtin Commands::	Commands that are a part of the shell.
+* Shell Variables::		Variables used or set by Bash.
+* Bash Features::		Features found only in Bash.
+* Job Control::			What job control is and how Bash allows you
+				to use it.
+* Command Line Editing::	Chapter describing the command line
+				editing features.
+* Using History Interactively::	Command History Expansion
+* Installing Bash::		How to build and install Bash on your system.
+* Reporting Bugs::		How to report bugs in Bash.
+* Major Differences From The Bourne Shell::	A terse list of the differences
+						between Bash and historical
+						versions of /bin/sh.
+* GNU Free Documentation License::	Copying and sharing this documentation.
+* Indexes::			Various indexes for this manual.
+@end menu
+@end ifnottex
+
+@node Introduction
+@chapter Introduction
+@menu
+* What is Bash?::		A short description of Bash.
+* What is a shell?::		A brief introduction to shells.
+@end menu
+
+@node What is Bash?
+@section What is Bash?
+
+Bash is the shell, or command language interpreter,
+for the @sc{gnu} operating system.
+The name is an acronym for the @samp{Bourne-Again SHell},
+a pun on Stephen Bourne, the author of the direct ancestor of
+the current Unix shell @code{sh}, 
+which appeared in the Seventh Edition Bell Labs Research version
+of Unix.
+
+Bash is largely compatible with @code{sh} and incorporates useful
+features from the Korn shell @code{ksh} and the C shell @code{csh}.
+It is intended to be a conformant implementation of the @sc{ieee}
+@sc{posix} Shell and Tools portion of the @sc{ieee} @sc{posix}
+specification (@sc{ieee} Standard 1003.1).
+It offers functional improvements over @code{sh} for both interactive and
+programming use.
+
+While the @sc{gnu} operating system provides other shells, including
+a version of @code{csh}, Bash is the default shell.
+Like other @sc{gnu} software, Bash is quite portable.  It currently runs
+on nearly every version of Unix and a few other operating systems @minus{}
+independently-supported ports exist for @sc{ms-dos}, @sc{os/2},
+and Windows platforms.
+
+@node What is a shell?
+@section What is a shell?
+
+At its base, a shell is simply a macro processor that executes
+commands.  The term macro processor means functionality where text
+and symbols are expanded to create larger expressions.
+
+A Unix shell is both a command interpreter and a programming
+language.  As a command interpreter, the shell provides the user
+interface to the rich set of @sc{gnu} utilities.  The programming
+language features allow these utilities to be combined.
+Files containing commands can be created, and become
+commands themselves.  These new commands have the same status as
+system commands in directories such as @file{/bin}, allowing users
+or groups to establish custom environments to automate their common
+tasks.
+
+Shells may be used interactively or non-interactively.  In
+interactive mode, they accept input typed from the keyboard.
+When executing non-interactively, shells execute commands read
+from a file.
+
+A shell allows execution of @sc{gnu} commands, both synchronously and
+asynchronously.
+The shell waits for synchronous commands to complete before accepting
+more input; asynchronous commands continue to execute in parallel
+with the shell while it reads and executes additional commands.
+The @dfn{redirection} constructs permit
+fine-grained control of the input and output of those commands.
+Moreover, the shell allows control over the contents of commands'
+environments.
+
+Shells also provide a small set of built-in
+commands (@dfn{builtins}) implementing functionality impossible
+or inconvenient to obtain via separate utilities.
+For example, @code{cd}, @code{break}, @code{continue}, and
+@code{exec} cannot be implemented outside of the shell because
+they directly manipulate the shell itself.
+The @code{history}, @code{getopts}, @code{kill}, or @code{pwd}
+builtins, among others, could be implemented in separate utilities,
+but they are more convenient to use as builtin commands.
+All of the shell builtins are described in
+subsequent sections.
+
+While executing commands is essential, most of the power (and
+complexity) of shells is due to their embedded programming
+languages.  Like any high-level language, the shell provides
+variables, flow control constructs, quoting, and functions. 
+
+Shells offer features geared specifically for
+interactive use rather than to augment the programming language. 
+These interactive features include job control, command line
+editing, command history and aliases.  Each of these features is
+described in this manual.
+
+@node Definitions
+@chapter Definitions
+These definitions are used throughout the remainder of this manual.
+
+@table @code
+
+@item POSIX
+@cindex POSIX
+A family of open system standards based on Unix.  Bash
+is primarily concerned with the Shell and Utilities portion of the
+@sc{posix} 1003.1 standard. 
+
+@item blank
+A space or tab character.
+
+@item builtin
+@cindex builtin
+A command that is implemented internally by the shell itself, rather
+than by an executable program somewhere in the file system.
+
+@item control operator
+@cindex control operator
+A @code{token} that performs a control function.  It is a @code{newline}
+or one of the following:
+@samp{||}, @samp{&&}, @samp{&}, @samp{;}, @samp{;;}, @samp{;&}, @samp{;;&},
+@samp{|}, @samp{|&}, @samp{(}, or @samp{)}.
+
+@item exit status
+@cindex exit status
+The value returned by a command to its caller.  The value is restricted
+to eight bits, so the maximum value is 255.
+
+@item field
+@cindex field
+A unit of text that is the result of one of the shell expansions.  After
+expansion, when executing a command, the resulting fields are used as
+the command name and arguments.
+
+@item filename
+@cindex filename
+A string of characters used to identify a file.
+
+@item job
+@cindex job
+A set of processes comprising a pipeline, and any processes descended
+from it, that are all in the same process group.
+
+@item job control
+@cindex job control
+A mechanism by which users can selectively stop (suspend) and restart
+(resume) execution of processes.
+
+@item metacharacter
+@cindex metacharacter
+A character that, when unquoted, separates words.  A metacharacter is
+a @code{space}, @code{tab}, @code{newline}, or one of the following characters:
+@samp{|}, @samp{&}, @samp{;}, @samp{(}, @samp{)}, @samp{<}, or
+@samp{>}.
+
+@item name
+@cindex name
+@cindex identifier
+A @code{word} consisting solely of letters, numbers, and underscores,
+and beginning with a letter or underscore.  @code{Name}s are used as
+shell variable and function names.
+Also referred to as an @code{identifier}.
+
+@item operator
+@cindex operator, shell
+A @code{control operator} or a @code{redirection operator}.
+@xref{Redirections}, for a list of redirection operators.
+Operators contain at least one unquoted @code{metacharacter}.
+
+@item process group
+@cindex process group
+A collection of related processes each having the same process
+group @sc{id}.
+
+@item process group ID
+@cindex process group ID
+A unique identifier that represents a @code{process group}
+during its lifetime.
+
+@item reserved word
+@cindex reserved word
+A @code{word} that has a special meaning to the shell.  Most reserved
+words introduce shell flow control constructs, such as @code{for} and
+@code{while}.
+
+@item return status
+@cindex return status
+A synonym for @code{exit status}.
+
+@item signal
+@cindex signal
+A mechanism by which a process may be notified by the kernel
+of an event occurring in the system.
+
+@item special builtin
+@cindex special builtin
+A shell builtin command that has been classified as special by the
+@sc{posix} standard.
+
+@item token
+@cindex token
+A sequence of characters considered a single unit by the shell.
+It is either a @code{word} or an @code{operator}.
+
+@item word
+@cindex word
+A sequence of characters treated as a unit by the shell.
+Words may not include unquoted @code{metacharacters}.
+@end table
+
+@node Basic Shell Features
+@chapter Basic Shell Features
+@cindex Bourne shell
+
+Bash is an acronym for @samp{Bourne-Again SHell}.
+The Bourne shell is
+the traditional Unix shell originally written by Stephen Bourne.
+All of the Bourne shell builtin commands are available in Bash,
+The rules for evaluation and quoting are taken from the @sc{posix}
+specification for the `standard' Unix shell.
+
+This chapter briefly summarizes the shell's `building blocks':
+commands, control structures, shell functions, shell @i{parameters},
+shell expansions,
+@i{redirections}, which are a way to direct input and output from
+and to named files, and how the shell executes commands.
+
+@menu
+* Shell Syntax::		What your input means to the shell.
+* Shell Commands::		The types of commands you can use.
+* Shell Functions::		Grouping commands by name.
+* Shell Parameters::		How the shell stores values.
+* Shell Expansions::		How Bash expands parameters and the various
+				expansions available.
+* Redirections::		A way to control where input and output go.
+* Executing Commands::		What happens when you run a command.
+* Shell Scripts::		Executing files of shell commands.
+@end menu
+
+@node Shell Syntax
+@section Shell Syntax
+@menu
+* Shell Operation::	The basic operation of the shell.
+* Quoting::		How to remove the special meaning from characters.
+* Comments::		How to specify comments.
+@end menu
+
+When the shell reads input, it proceeds through a
+sequence of operations.  If the input indicates the beginning of a
+comment, the shell ignores the comment symbol (@samp{#}), and the rest
+of that line.
+                                
+Otherwise, roughly speaking,  the shell reads its input and
+divides the input into words and operators, employing the quoting rules
+to select which meanings to assign various words and characters.
+
+The shell then parses these tokens into commands and other constructs,
+removes the special meaning of certain words or characters, expands
+others, redirects input and output as needed, executes the specified
+command, waits for the command's exit status, and makes that exit status
+available for further inspection or processing.
+
+@node Shell Operation
+@subsection Shell Operation
+
+The following is a brief description of the shell's operation when it
+reads and executes a command.  Basically, the shell does the
+following:
+
+@enumerate
+@item
+Reads its input from a file (@pxref{Shell Scripts}), from a string
+supplied as an argument to the @option{-c} invocation option
+(@pxref{Invoking Bash}), or from the user's terminal.
+
+@item
+Breaks the input into words and operators, obeying the quoting rules
+described in @ref{Quoting}.  These tokens are separated by
+@code{metacharacters}.  Alias expansion is performed by this step
+(@pxref{Aliases}).
+
+@item
+Parses the tokens into simple and compound commands
+(@pxref{Shell Commands}).
+
+@item
+Performs the various shell expansions (@pxref{Shell Expansions}), breaking
+the expanded tokens into lists of filenames (@pxref{Filename Expansion})
+and commands and arguments.
+
+@item
+Performs any necessary redirections (@pxref{Redirections}) and removes
+the redirection operators and their operands from the argument list.
+
+@item
+Executes the command (@pxref{Executing Commands}).
+
+@item
+Optionally waits for the command to complete and collects its exit
+status (@pxref{Exit Status}).
+
+@end enumerate
+
+@node Quoting
+@subsection Quoting
+@cindex quoting
+@menu
+* Escape Character::	How to remove the special meaning from a single
+			character.
+* Single Quotes::	How to inhibit all interpretation of a sequence
+			of characters.
+* Double Quotes::	How to suppress most of the interpretation of a
+			sequence of characters.
+* ANSI-C Quoting::	How to expand ANSI-C sequences in quoted strings.
+* Locale Translation::	How to translate strings into different languages.
+@end menu
+
+Quoting is used to remove the special meaning of certain
+characters or words to the shell.  Quoting can be used to
+disable special treatment for special characters, to prevent
+reserved words from being recognized as such, and to prevent
+parameter expansion.
+
+Each of the shell metacharacters (@pxref{Definitions})
+has special meaning to the shell and must be quoted if it is to
+represent itself.
+When the command history expansion facilities are being used
+(@pxref{History Interaction}), the
+@var{history expansion} character, usually @samp{!}, must be quoted
+to prevent history expansion.  @xref{Bash History Facilities}, for
+more details concerning history expansion.
+
+There are three quoting mechanisms: the
+@var{escape character}, single quotes, and double quotes.
+
+@node Escape Character
+@subsubsection Escape Character
+A non-quoted backslash @samp{\} is the Bash escape character.
+It preserves the literal value of the next character that follows,
+with the exception of @code{newline}.  If a @code{\newline} pair
+appears, and the backslash itself is not quoted, the @code{\newline}
+is treated as a line continuation (that is, it is removed from
+the input stream and effectively ignored).
+
+@node Single Quotes
+@subsubsection Single Quotes
+
+Enclosing characters in single quotes (@samp{'}) preserves the literal value
+of each character within the quotes.  A single quote may not occur
+between single quotes, even when preceded by a backslash.
+
+@node Double Quotes
+@subsubsection Double Quotes
+
+Enclosing characters in double quotes (@samp{"}) preserves the literal value
+of all characters within the quotes, with the exception of
+@samp{$}, @samp{`}, @samp{\},
+and, when history expansion is enabled, @samp{!}.
+When the shell is in
+@sc{posix} mode (@pxref{Bash POSIX Mode}),
+the @samp{!} has no special meaning
+within double quotes, even when history expansion is enabled.
+The characters @samp{$} and @samp{`}
+retain their special meaning within double quotes (@pxref{Shell Expansions}).
+The backslash retains its special meaning only when followed by one of
+the following characters:
+@samp{$}, @samp{`}, @samp{"}, @samp{\}, or @code{newline}.
+Within double quotes, backslashes that are followed by one of these
+characters are removed.  Backslashes preceding characters without a
+special meaning are left unmodified.
+A double quote may be quoted within double quotes by preceding it with
+a backslash.
+If enabled, history expansion will be performed unless an @samp{!}
+appearing in double quotes is escaped using a backslash.
+The backslash preceding the @samp{!} is not removed.
+
+The special parameters @samp{*} and @samp{@@} have special meaning
+when in double quotes (@pxref{Shell Parameter Expansion}).
+
+@node ANSI-C Quoting
+@subsubsection ANSI-C Quoting
+@cindex quoting, ANSI
+
+Words of the form @code{$'@var{string}'} are treated specially.  The
+word expands to @var{string}, with backslash-escaped characters replaced
+as specified by the ANSI C standard.  Backslash escape sequences, if
+present, are decoded as follows:
+
+@table @code
+@item \a
+alert (bell)
+@item \b
+backspace
+@item \e
+@itemx \E
+an escape character (not ANSI C)
+@item \f
+form feed
+@item \n
+newline
+@item \r
+carriage return
+@item \t
+horizontal tab
+@item \v
+vertical tab
+@item \\
+backslash
+@item \'
+single quote
+@item \"
+double quote
+@item \?
+question mark
+@item \@var{nnn}
+the eight-bit character whose value is the octal value @var{nnn}
+(one to three octal digits)
+@item \x@var{HH}
+the eight-bit character whose value is the hexadecimal value @var{HH}
+(one or two hex digits)
+@item \u@var{HHHH}
+the Unicode (ISO/IEC 10646) character whose value is the hexadecimal value
+@var{HHHH} (one to four hex digits)
+@item \U@var{HHHHHHHH}
+the Unicode (ISO/IEC 10646) character whose value is the hexadecimal value
+@var{HHHHHHHH} (one to eight hex digits)
+@item \c@var{x}
+a control-@var{x} character
+@end table
+
+@noindent
+The expanded result is single-quoted, as if the dollar sign had not
+been present.
+
+@node Locale Translation
+@subsubsection Locale-Specific Translation
+@cindex localization
+@cindex internationalization
+@cindex native languages
+@cindex translation, native languages
+
+A double-quoted string preceded by a dollar sign (@samp{$})
+will cause the string to be translated according to the current locale.
+The @var{gettext} infrastructure performs the message catalog lookup and 
+translation, using the @code{LC_MESSAGES} and @code{TEXTDOMAIN} shell
+variables, as explained below. See the gettext documentation for additional
+details.
+If the current locale is @code{C} or @code{POSIX},
+or if there are no translations available,
+the dollar sign is ignored.
+If the string is translated and replaced, the replacement is
+double-quoted.
+
+@vindex LC_MESSAGES
+@vindex TEXTDOMAIN
+@vindex TEXTDOMAINDIR
+Some systems use the message catalog selected by the @env{LC_MESSAGES}
+shell variable.  Others create the name of the message catalog from the
+value of the @env{TEXTDOMAIN} shell variable, possibly adding a
+suffix of @samp{.mo}.  If you use the @env{TEXTDOMAIN} variable, you
+may need to set the @env{TEXTDOMAINDIR} variable to the location of
+the message catalog files.  Still others use both variables in this
+fashion:
+@env{TEXTDOMAINDIR}/@env{LC_MESSAGES}/LC_MESSAGES/@env{TEXTDOMAIN}.mo.
+
+@node Comments
+@subsection Comments
+@cindex comments, shell
+
+In a non-interactive shell, or an interactive shell in which the
+@code{interactive_comments} option to the @code{shopt}
+builtin is enabled (@pxref{The Shopt Builtin}),
+a word beginning with @samp{#}
+causes that word and all remaining characters on that line to
+be ignored.  An interactive shell without the @code{interactive_comments}
+option enabled does not allow comments.  The @code{interactive_comments}
+option is on by default in interactive shells.
+@xref{Interactive Shells}, for a description of what makes
+a shell interactive.
+
+@node Shell Commands
+@section Shell Commands
+@cindex commands, shell
+
+A simple shell command such as @code{echo a b c} consists of the command
+itself followed by arguments, separated by spaces.
+
+More complex shell commands are composed of simple commands arranged together
+in a variety of ways: in a pipeline in which the output of one command
+becomes the input of a second, in a loop or conditional construct, or in
+some other grouping.
+
+@menu
+* Reserved Words::		Words that have special meaning to the shell.
+* Simple Commands::		The most common type of command.
+* Pipelines::			Connecting the input and output of several
+				commands.
+* Lists::			How to execute commands sequentially.
+* Compound Commands::		Shell commands for control flow.
+* Coprocesses::			Two-way communication between commands.
+* GNU Parallel::		Running commands in parallel.
+@end menu
+
+@node Reserved Words
+@subsection Reserved Words
+@cindex reserved words
+
+Reserved words are words that have special meaning to the shell.
+They are used to begin and end the shell's compound commands.
+
+The following words are recognized as reserved when unquoted and 
+the first word of a command (see below for exceptions):
+
+@multitable @columnfractions .1 .1 .1 .1 .12 .1
+@item @code{if} @tab @code{then} @tab @code{elif}
+@tab @code{else} @tab @code{fi} @tab @code{time}
+@item @code{for} @tab @code{in} @tab @code{until}
+@tab @code{while} @tab @code{do} @tab @code{done}
+@item @code{case} @tab @code{esac} @tab @code{coproc}
+@tab @code{select} @tab @code{function}
+@item @code{@{} @tab @code{@}} @tab @code{[[} @tab @code{]]} @tab @code{!}
+@end multitable
+
+@noindent
+@code{in} is recognized as a reserved word if it is the third word of a
+@code{case} or @code{select} command.
+@code{in} and @code{do} are recognized as reserved
+words if they are the third word in a @code{for} command.
+
+@node Simple Commands
+@subsection Simple Commands
+@cindex commands, simple
+
+A simple command is the kind of command encountered most often.
+It's just a sequence of words separated by @code{blank}s, terminated
+by one of the shell's control operators (@pxref{Definitions}).  The
+first word generally specifies a command to be executed, with the
+rest of the words being that command's arguments.
+
+The return status (@pxref{Exit Status}) of a simple command is
+its exit status as provided
+by the @sc{posix} 1003.1 @code{waitpid} function, or 128+@var{n} if
+the command was terminated by signal @var{n}.
+
+@node Pipelines
+@subsection Pipelines
+@cindex pipeline
+@cindex commands, pipelines
+
+A @code{pipeline} is a sequence of one or more commands separated by
+one of the control operators @samp{|} or @samp{|&}.
+
+@rwindex time
+@rwindex !
+@cindex command timing
+The format for a pipeline is
+@example
+[time [-p]] [!] @var{command1} [ | or |& @var{command2} ] @dots{}
+@end example
+
+@noindent
+The output of each command in the pipeline is connected via a pipe
+to the input of the next command.
+That is, each command reads the previous command's output.  This
+connection is performed before any redirections specified by the
+command.
+
+If @samp{|&} is used, @var{command1}'s standard error, in addition to
+its standard output, is connected to
+@var{command2}'s standard input through the pipe;
+it is shorthand for @code{2>&1 |}.
+This implicit redirection of the standard error to the standard output is
+performed after any redirections specified by the command.
+
+The reserved word @code{time} causes timing statistics
+to be printed for the pipeline once it finishes.
+The statistics currently consist of elapsed (wall-clock) time and
+user and system time consumed by the command's execution.
+The @option{-p} option changes the output format to that specified
+by @sc{posix}.
+When the shell is in @sc{posix} mode (@pxref{Bash POSIX Mode}),
+it does not recognize @code{time} as a reserved word if the next
+token begins with a @samp{-}.
+The @env{TIMEFORMAT} variable may be set to a format string that
+specifies how the timing information should be displayed.
+@xref{Bash Variables}, for a description of the available formats.
+The use of @code{time} as a reserved word permits the timing of
+shell builtins, shell functions, and pipelines.  An external
+@code{time} command cannot time these easily.
+
+When the shell is in @sc{posix} mode (@pxref{Bash POSIX Mode}), @code{time}
+may be followed by a newline.  In this case, the shell displays the
+total user and system time consumed by the shell and its children.
+The @env{TIMEFORMAT} variable may be used to specify the format of
+the time information.
+
+If the pipeline is not executed asynchronously (@pxref{Lists}), the
+shell waits for all commands in the pipeline to complete.
+
+Each command in a pipeline is executed in its own subshell, which is a
+separate process (@pxref{Command Execution Environment}).
+If the @code{lastpipe} option is enabled using the @code{shopt} builtin
+(@pxref{The Shopt Builtin}),
+the last element of a pipeline may be run by the shell process.
+
+The exit
+status of a pipeline is the exit status of the last command in the
+pipeline, unless the @code{pipefail} option is enabled
+(@pxref{The Set Builtin}).
+If @code{pipefail} is enabled, the pipeline's return status is the
+value of the last (rightmost) command to exit with a non-zero status,
+or zero if all commands exit successfully.
+If the reserved word @samp{!} precedes the pipeline, the
+exit status is the logical negation of the exit status as described
+above.
+The shell waits for all commands in the pipeline to terminate before
+returning a value.
+
+@node Lists
+@subsection Lists of Commands
+@cindex commands, lists
+
+A @code{list} is a sequence of one or more pipelines separated by one
+of the operators @samp{;}, @samp{&}, @samp{&&}, or @samp{||},
+and optionally terminated by one of @samp{;}, @samp{&}, or a
+@code{newline}.
+
+Of these list operators, @samp{&&} and @samp{||}
+have equal precedence, followed by @samp{;} and @samp{&},
+which have equal precedence.
+
+A sequence of one or more newlines may appear in a @code{list}
+to delimit commands, equivalent to a semicolon.
+
+If a command is terminated by the control operator @samp{&},
+the shell executes the command asynchronously in a subshell.
+This is known as executing the command in the @var{background},
+and these are referred to as @var{asynchronous} commands.
+The shell does not wait for the command to finish, and the return
+status is 0 (true).
+When job control is not active (@pxref{Job Control}),
+the standard input for asynchronous commands, in the absence of any
+explicit redirections, is redirected from @code{/dev/null}.
+
+Commands separated by a @samp{;} are executed sequentially; the shell
+waits for each command to terminate in turn.  The return status is the
+exit status of the last command executed.
+
+@sc{and} and @sc{or} lists are sequences of one or more pipelines
+separated by the control operators @samp{&&} and @samp{||},
+respectively.  @sc{and} and @sc{or} lists are executed with left
+associativity.
+
+An @sc{and} list has the form
+@example
+@var{command1} && @var{command2}
+@end example
+
+@noindent
+@var{command2} is executed if, and only if, @var{command1}
+returns an exit status of zero (success).
+
+An @sc{or} list has the form
+@example
+@var{command1} || @var{command2}
+@end example
+
+@noindent
+@var{command2} is executed if, and only if, @var{command1}
+returns a non-zero exit status.
+
+The return status of
+@sc{and} and @sc{or} lists is the exit status of the last command
+executed in the list.
+
+@node Compound Commands
+@subsection Compound Commands
+@cindex commands, compound
+
+@menu
+* Looping Constructs::		Shell commands for iterative action.
+* Conditional Constructs::	Shell commands for conditional execution.
+* Command Grouping::		Ways to group commands.
+@end menu
+
+Compound commands are the shell programming language constructs.
+Each construct begins with a reserved word or control operator and is
+terminated by a corresponding reserved word or operator.
+Any redirections (@pxref{Redirections}) associated with a compound command
+apply to all commands within that compound command unless explicitly overridden.
+
+In most cases a list of commands in a compound command's description may be
+separated from the rest of the command by one or more newlines, and may be
+followed by a newline in place of a semicolon.
+
+Bash provides looping constructs, conditional commands, and mechanisms
+to group commands and execute them as a unit.
+
+@node Looping Constructs
+@subsubsection Looping Constructs
+@cindex commands, looping
+
+Bash supports the following looping constructs.
+
+Note that wherever a @samp{;} appears in the description of a
+command's syntax, it may be replaced with one or more newlines.
+
+@table @code
+@item until
+@rwindex until
+@rwindex do
+@rwindex done
+The syntax of the @code{until} command is:
+
+@example
+until @var{test-commands}; do @var{consequent-commands}; done
+@end example
+
+Execute @var{consequent-commands} as long as
+@var{test-commands} has an exit status which is not zero.
+The return status is the exit status of the last command executed
+in @var{consequent-commands}, or zero if none was executed.
+
+@item while
+@rwindex while
+The syntax of the @code{while} command is:
+
+@example
+while @var{test-commands}; do @var{consequent-commands}; done
+@end example
+
+Execute @var{consequent-commands} as long as
+@var{test-commands} has an exit status of zero.
+The return status is the exit status of the last command executed
+in @var{consequent-commands}, or zero if none was executed.
+
+@item for
+@rwindex for
+The syntax of the @code{for} command is:
+
+@example
+for @var{name} [ [in [@var{words} @dots{}] ] ; ] do @var{commands}; done
+@end example
+
+Expand @var{words} (@pxref{Shell Expansions}), and execute @var{commands}
+once for each member
+in the resultant list, with @var{name} bound to the current member.
+If @samp{in @var{words}} is not present, the @code{for} command
+executes the @var{commands} once for each positional parameter that is
+set, as if @samp{in "$@@"} had been specified
+(@pxref{Special Parameters}).
+
+The return status is the exit status of the last command that executes.
+If there are no items in the expansion of @var{words}, no commands are
+executed, and the return status is zero.
+
+An alternate form of the @code{for} command is also supported:
+
+@example
+for (( @var{expr1} ; @var{expr2} ; @var{expr3} )) ; do @var{commands} ; done
+@end example
+
+First, the arithmetic expression @var{expr1} is evaluated according
+to the rules described below (@pxref{Shell Arithmetic}).
+The arithmetic expression @var{expr2} is then evaluated repeatedly
+until it evaluates to zero.   
+Each time @var{expr2} evaluates to a non-zero value, @var{commands} are
+executed and the arithmetic expression @var{expr3} is evaluated.       
+If any expression is omitted, it behaves as if it evaluates to 1.
+The return value is the exit status of the last command in @var{commands}
+that is executed, or false if any of the expressions is invalid.
+@end table
+
+The @code{break} and @code{continue} builtins (@pxref{Bourne Shell Builtins})
+may be used to control loop execution.
+
+@node Conditional Constructs
+@subsubsection Conditional Constructs
+@cindex commands, conditional
+
+@table @code
+@item if
+@rwindex if
+@rwindex then
+@rwindex else
+@rwindex elif
+@rwindex fi
+The syntax of the @code{if} command is:
+
+@example
+if @var{test-commands}; then
+  @var{consequent-commands};
+[elif @var{more-test-commands}; then
+  @var{more-consequents};]
+[else @var{alternate-consequents};]
+fi
+@end example
+
+The @var{test-commands} list is executed, and if its return status is zero,
+the @var{consequent-commands} list is executed.
+If @var{test-commands} returns a non-zero status, each @code{elif} list
+is executed in turn, and if its exit status is zero,
+the corresponding @var{more-consequents} is executed and the   
+command completes.
+If @samp{else @var{alternate-consequents}} is present, and
+the final command in the final @code{if} or @code{elif} clause
+has a non-zero exit status, then @var{alternate-consequents} is executed.
+The return status is the exit status of the last command executed, or
+zero if no condition tested true.
+
+@item case
+@rwindex case
+@rwindex in
+@rwindex esac
+The syntax of the @code{case} command is:
+
+@example
+case @var{word} in
+    [ [(] @var{pattern} [| @var{pattern}]@dots{}) @var{command-list} ;;]@dots{}
+esac
+@end example
+
+@code{case} will selectively execute the @var{command-list} corresponding to
+the first @var{pattern} that matches @var{word}.
+The match is performed according
+to the rules described below in @ref{Pattern Matching}.
+If the @code{nocasematch} shell option
+(see the description of @code{shopt} in @ref{The Shopt Builtin})
+is enabled, the match is performed without regard to the case
+of alphabetic characters.
+The @samp{|} is used to separate multiple patterns, and the @samp{)}
+operator terminates a pattern list.
+A list of patterns and an associated command-list is known
+as a @var{clause}.
+
+Each clause must be terminated with @samp{;;}, @samp{;&}, or @samp{;;&}.
+The @var{word} undergoes tilde expansion, parameter expansion, command
+substitution, arithmetic expansion, and quote removal
+(@pxref{Shell Parameter Expansion})
+before matching is
+attempted.  Each @var{pattern} undergoes tilde expansion, parameter
+expansion, command substitution, and arithmetic expansion.
+
+There may be an arbitrary number of @code{case} clauses, each terminated
+by a @samp{;;}, @samp{;&}, or @samp{;;&}.
+The first pattern that matches determines the
+command-list that is executed.
+It's a common idiom to use @samp{*} as the final pattern to define the
+default case, since that pattern will always match.
+
+Here is an example using @code{case} in a script that could be used to
+describe one interesting feature of an animal:
+
+@example
+echo -n "Enter the name of an animal: "
+read ANIMAL
+echo -n "The $ANIMAL has "
+case $ANIMAL in
+  horse | dog | cat) echo -n "four";;
+  man | kangaroo ) echo -n "two";;
+  *) echo -n "an unknown number of";;
+esac
+echo " legs."
+@end example
+
+@noindent
+
+If the @samp{;;} operator is used, no subsequent matches are attempted after
+the first pattern match.
+Using @samp{;&}  in place of @samp{;;} causes execution to continue with
+the @var{command-list} associated with the next clause, if any.
+Using @samp{;;&} in place of @samp{;;} causes the shell to test the patterns
+in the next clause, if any, and execute any associated @var{command-list}
+on a successful match,
+continuing the case statement execution as if the pattern list had not matched.
+
+The return status is zero if no @var{pattern} is matched.  Otherwise, the
+return status is the exit status of the @var{command-list} executed.
+
+@item select
+@rwindex select
+
+The @code{select} construct allows the easy generation of menus.
+It has almost the same syntax as the @code{for} command:
+
+@example
+select @var{name} [in @var{words} @dots{}]; do @var{commands}; done
+@end example
+
+The list of words following @code{in} is expanded, generating a list
+of items.  The set of expanded words is printed on the standard
+error output stream, each preceded by a number.  If the
+@samp{in @var{words}} is omitted, the positional parameters are printed,
+as if @samp{in "$@@"} had been specified.
+The @env{PS3} prompt is then displayed and a line is read from the
+standard input.
+If the line consists of a number corresponding to one of the displayed
+words, then the value of @var{name} is set to that word.
+If the line is empty, the words and prompt are displayed again.
+If @code{EOF} is read, the @code{select} command completes.
+Any other value read causes @var{name} to be set to null.
+The line read is saved in the variable @env{REPLY}.
+
+The @var{commands} are executed after each selection until a
+@code{break} command is executed, at which
+point the @code{select} command completes.
+
+Here is an example that allows the user to pick a filename from the
+current directory, and displays the name and index of the file
+selected.
+
+@example
+select fname in *;
+do
+	echo you picked $fname \($REPLY\)
+	break;
+done
+@end example
+
+@item ((@dots{}))
+@example
+(( @var{expression} ))
+@end example
+
+The arithmetic @var{expression} is evaluated according to the rules
+described below (@pxref{Shell Arithmetic}).
+If the value of the expression is non-zero, the return status is 0;
+otherwise the return status is 1.  This is exactly equivalent to
+@example
+let "@var{expression}"
+@end example
+@noindent
+@xref{Bash Builtins}, for a full description of the @code{let} builtin.
+
+@item [[@dots{}]]
+@rwindex [[
+@rwindex ]]
+@example
+[[ @var{expression} ]]
+@end example
+
+Return a status of 0 or 1 depending on the evaluation of
+the conditional expression @var{expression}.
+Expressions are composed of the primaries described below in
+@ref{Bash Conditional Expressions}.
+Word splitting and filename expansion are not performed on the words
+between the @code{[[} and @code{]]}; tilde expansion, parameter and
+variable expansion, arithmetic expansion, command substitution, process
+substitution, and quote removal are performed.
+Conditional operators such as @samp{-f} must be unquoted to be recognized
+as primaries.
+
+When used with @code{[[}, the @samp{<} and @samp{>} operators sort
+lexicographically using the current locale.
+
+When the @samp{==} and @samp{!=} operators are used, the string to the
+right of the operator is considered a pattern and matched according
+to the rules described below in @ref{Pattern Matching},
+as if the @code{extglob} shell option were enabled.
+The @samp{=} operator is identical to @samp{==}.
+If the @code{nocasematch} shell option
+(see the description of @code{shopt} in @ref{The Shopt Builtin})
+is enabled, the match is performed without regard to the case
+of alphabetic characters.
+The return value is 0 if the string matches (@samp{==}) or does not
+match (@samp{!=}) the pattern, and 1 otherwise.
+Any part of the pattern may be quoted to force the quoted portion
+to be matched as a string.
+
+An additional binary operator, @samp{=~}, is available, with the same
+precedence as @samp{==} and @samp{!=}.
+When it is used, the string to the right of the operator is considered
+a @sc{posix} extended regular expression and matched accordingly
+(using the @sc{posix} @code{regcomp} and @code{regexec} interfaces
+usually described in @i{regex}(3)).
+The return value is 0 if the string matches
+the pattern, and 1 otherwise.
+If the regular expression is syntactically incorrect, the conditional
+expression's return value is 2.
+If the @code{nocasematch} shell option
+(see the description of @code{shopt} in @ref{The Shopt Builtin})
+is enabled, the match is performed without regard to the case
+of alphabetic characters.
+Any part of the pattern may be quoted to force the quoted portion
+to be matched as a string.
+Bracket expressions in regular expressions must be treated carefully,
+since normal quoting characters lose their meanings between brackets.
+If the pattern is stored in a shell variable, quoting the variable
+expansion forces the entire pattern to be matched as a string.
+
+The pattern will match if it matches any part of the string.
+Anchor the pattern using the @samp{^} and @samp{$} regular expression
+operators to force it to match the entire string.
+The array variable @code{BASH_REMATCH} records which parts of the string
+matched the pattern.
+The element of @code{BASH_REMATCH} with index 0 contains the portion of
+the string matching the entire regular expression.
+Substrings matched by parenthesized subexpressions within the regular
+expression are saved in the remaining @code{BASH_REMATCH} indices.
+The element of @code{BASH_REMATCH} with index @var{n} is the portion of the
+string matching the @var{n}th parenthesized subexpression.
+
+For example, the following will match a line
+(stored in the shell variable @var{line})
+if there is a sequence of characters anywhere in the value consisting of
+any number, including zero, of 
+characters in the @code{space} character class,
+zero or one instances of @samp{a}, then a @samp{b}:
+@example
+[[ $line =~ [[:space:]]*(a)?b ]]
+@end example
+
+@noindent
+That means values like @samp{aab} and @samp{  aaaaaab} will match, as
+will a line containing a @samp{b} anywhere in its value.
+
+Storing the regular expression in a shell variable is often a useful
+way to avoid problems with quoting characters that are special to the
+shell.
+It is sometimes difficult to specify a regular expression literally
+without using quotes, or to keep track of the quoting used by regular
+expressions while paying attention to the shell's quote removal.
+Using a shell variable to store the pattern decreases these problems.
+For example, the following is equivalent to the above:
+@example
+pattern='[[:space:]]*(a)?b'
+[[ $line =~ $pattern ]]
+@end example
+
+@noindent
+If you want to match a character that's special to the regular expression
+grammar, it has to be quoted to remove its special meaning.
+This means that in the pattern @samp{xxx.txt}, the @samp{.} matches any
+character in the string (its usual regular expression meaning), but in the
+pattern @samp{"xxx.txt"} it can only match a literal @samp{.}.
+Shell programmers should take special care with backslashes, since backslashes
+are used both by the shell and regular expressions to remove the special
+meaning from the following character.
+The following two sets of commands are @emph{not} equivalent:
+@example
+pattern='\.'
+
+[[ . =~ $pattern ]]
+[[ . =~ \. ]]
+
+[[ . =~ "$pattern" ]]
+[[ . =~ '\.' ]]
+@end example
+
+@noindent
+The first two matches will succeed, but the second two will not, because
+in the second two the backslash will be part of the pattern to be matched.
+In the first two examples, the backslash removes the special meaning from
+@samp{.}, so the literal @samp{.} matches.
+If the string in the first examples were anything other than @samp{.}, say
+@samp{a}, the pattern would not match, because the quoted @samp{.} in the
+pattern loses its special meaning of matching any single character.
+
+Expressions may be combined using the following operators, listed
+in decreasing order of precedence:
+
+@table @code
+@item ( @var{expression} )
+Returns the value of @var{expression}.
+This may be used to override the normal precedence of operators.
+
+@item ! @var{expression}
+True if @var{expression} is false.
+
+@item @var{expression1} && @var{expression2}
+True if both @var{expression1} and @var{expression2} are true.
+
+@item @var{expression1} || @var{expression2}
+True if either @var{expression1} or @var{expression2} is true.
+@end table
+
+@noindent
+The @code{&&} and @code{||} operators do not evaluate @var{expression2} if the
+value of @var{expression1} is sufficient to determine the return
+value of the entire conditional expression.
+@end table
+
+@node Command Grouping
+@subsubsection Grouping Commands
+@cindex commands, grouping
+
+Bash provides two ways to group a list of commands to be executed
+as a unit.  When commands are grouped, redirections may be applied
+to the entire command list.  For example, the output of all the
+commands in the list may be redirected to a single stream.
+
+@table @code
+@item ()
+@example
+( @var{list} )
+@end example
+
+Placing a list of commands between parentheses causes a subshell
+environment to be created (@pxref{Command Execution Environment}), and each
+of the commands in @var{list} to be executed in that subshell.  Since the
+@var{list} is executed in a subshell, variable assignments do not remain in
+effect after the subshell completes. 
+
+@item @{@}
+@rwindex @{
+@rwindex @}
+@example
+@{ @var{list}; @}
+@end example
+
+Placing a list of commands between curly braces causes the list to
+be executed in the current shell context.  No subshell is created.
+The semicolon (or newline) following @var{list} is required.
+@end table
+
+In addition to the creation of a subshell, there is a subtle difference
+between these two constructs due to historical reasons.  The braces
+are @code{reserved words}, so they must be separated from the @var{list}
+by @code{blank}s or other shell metacharacters.
+The parentheses are @code{operators}, and are
+recognized as separate tokens by the shell even if they are not separated
+from the @var{list} by whitespace.
+
+The exit status of both of these constructs is the exit status of
+@var{list}.
+
+@node Coprocesses
+@subsection Coprocesses
+@cindex coprocess
+
+A @code{coprocess} is a shell command preceded by the @code{coproc}
+reserved word.
+A coprocess is executed asynchronously in a subshell, as if the command
+had been terminated with the @samp{&} control operator, with a two-way pipe
+established between the executing shell and the coprocess.
+
+The format for a coprocess is:
+@example
+coproc [@var{NAME}] @var{command} [@var{redirections}]
+@end example
+
+@noindent
+This creates a coprocess named @var{NAME}.
+If @var{NAME} is not supplied, the default name is @var{COPROC}.
+@var{NAME} must not be supplied if @var{command} is a simple
+command (@pxref{Simple Commands}); otherwise, it is interpreted as
+the first word of the simple command.
+
+When the coprocess is executed, the shell creates an array variable
+(@pxref{Arrays})
+named @env{NAME} in the context of the executing shell.
+The standard output of @var{command}
+is connected via a pipe to a file descriptor in the executing shell,
+and that file descriptor is assigned to @env{NAME}[0].
+The standard input of @var{command}
+is connected via a pipe to a file descriptor in the executing shell,
+and that file descriptor is assigned to @env{NAME}[1].
+This pipe is established before any redirections specified by the
+command (@pxref{Redirections}).
+The file descriptors can be utilized as arguments to shell commands
+and redirections using standard word expansions.
+Other than those created to execute command and process substitutions,
+the file descriptors are not available in subshells.
+
+The process ID of the shell spawned to execute the coprocess is
+available as the value of the variable @env{NAME}_PID.
+The @code{wait}
+builtin command may be used to wait for the coprocess to terminate.
+
+Since the coprocess is created as an asynchronous command,
+the @code{coproc} command always returns success.
+The return status of a coprocess is the exit status of @var{command}.
+
+@node GNU Parallel
+@subsection GNU Parallel
+
+There are ways to run commands in parallel that are not built into Bash.
+GNU Parallel is a tool to do just that.
+
+GNU Parallel, as its name suggests, can be used to build and run commands
+in parallel.  You may run the same command with different arguments, whether
+they are filenames, usernames, hostnames, or lines read from files.  GNU
+Parallel provides shorthand references to many of the most common operations
+(input lines, various portions of the input line, different ways to specify
+the input source, and so on).  Parallel can replace @code{xargs} or feed
+commands from its input sources to several different instances of Bash.
+
+For a complete description, refer to the GNU Parallel documentation.  A few
+examples should provide a brief introduction to its use.
+
+For example, it is easy to replace @code{xargs} to gzip all html files in the
+current directory and its subdirectories:
+@example
+find . -type f -name '*.html' -print | parallel gzip
+@end example
+@noindent
+If you need to protect special characters such as newlines in file names,
+use find's @option{-print0} option and parallel's @option{-0} option.
+
+You can use Parallel to move files from the current directory when the
+number of files is too large to process with one @code{mv} invocation:
+@example
+printf '%s\n' * | parallel mv @{@} destdir
+@end example
+
+As you can see, the @{@} is replaced with each line read from standard input.
+While using @code{ls} will work in most instances, it is not sufficient to
+deal with all filenames. @code{printf} is a shell builtin, and therefore is
+not subject to the kernel's limit on the number of arguments to a program,
+so you can use @samp{*} (but see below about the @code{dotglob} shell option).
+If you need to accommodate special characters in filenames, you can use
+
+@example
+printf '%s\0' * | parallel -0 mv @{@} destdir
+@end example
+
+@noindent
+as alluded to above.
+
+This will run as many @code{mv} commands as there are files in the current
+directory.
+You can emulate a parallel @code{xargs} by adding the @option{-X} option:
+@example
+printf '%s\0' * | parallel -0 -X mv @{@} destdir
+@end example
+
+(You may have to modify the pattern if you have the @code{dotglob} option
+enabled.)
+
+GNU Parallel can replace certain common idioms that operate on lines read
+from a file (in this case, filenames listed one per line):
+@example
+	while IFS= read -r x; do
+		do-something1 "$x" "config-$x"
+		do-something2 < "$x"
+	done < file | process-output
+@end example
+
+@noindent
+with a more compact syntax reminiscent of lambdas:
+@example
+cat list | parallel "do-something1 @{@} config-@{@} ; do-something2 < @{@}" |
+           process-output
+@end example
+
+Parallel provides a built-in mechanism to remove filename extensions, which
+lends itself to batch file transformations or renaming:
+@example
+ls *.gz | parallel -j+0 "zcat @{@} | bzip2 >@{.@}.bz2 && rm @{@}"
+@end example
+@noindent
+This will recompress all files in the current directory with names ending
+in .gz using bzip2, running one job per CPU (-j+0) in parallel.
+(We use @code{ls} for brevity here; using @code{find} as above is more
+robust in the face of filenames containing unexpected characters.)
+Parallel can take arguments from the command line; the above can also be
+written as
+
+@example
+parallel "zcat @{@} | bzip2 >@{.@}.bz2 && rm @{@}" ::: *.gz
+@end example
+
+If a command generates output, you may want to preserve the input order in
+the output.  For instance, the following command
+@example
+@{
+    echo foss.org.my ;
+    echo debian.org ;
+    echo freenetproject.org ;
+@} | parallel traceroute
+@end example
+@noindent
+will display as output the traceroute invocation that finishes first.
+Adding the @option{-k} option 
+@example
+@{
+    echo foss.org.my ;
+    echo debian.org ;
+    echo freenetproject.org ;
+@} | parallel -k traceroute
+@end example
+@noindent
+will ensure that the output of @code{traceroute foss.org.my} is displayed first.
+
+Finally, Parallel can be used to run a sequence of shell commands in parallel,
+similar to @samp{cat file | bash}.
+It is not uncommon to take a list of filenames, create a series of shell
+commands to operate on them, and feed that list of commands to a shell.
+Parallel can speed this up.  Assuming that @file{file} contains a list of
+shell commands, one per line,
+
+@example
+parallel -j 10 < file
+@end example
+
+@noindent
+will evaluate the commands using the shell (since no explicit command is
+supplied as an argument), in blocks of ten shell jobs at a time.
+
+@node Shell Functions
+@section Shell Functions
+@cindex shell function
+@cindex functions, shell
+
+Shell functions are a way to group commands for later execution
+using a single name for the group.  They are executed just like
+a "regular" command.
+When the name of a shell function is used as a simple command name,
+the list of commands associated with that function name is executed.
+Shell functions are executed in the current
+shell context; no new process is created to interpret them.
+
+Functions are declared using this syntax:
+@rwindex function
+@example
+@var{fname} () @var{compound-command} [ @var{redirections} ]
+@end example
+
+or
+
+@example
+function @var{fname} [()] @var{compound-command} [ @var{redirections} ]
+@end example
+
+This defines a shell function named @var{fname}.  The reserved
+word @code{function} is optional.
+If the @code{function} reserved
+word is supplied, the parentheses are optional.
+The @var{body} of the function is the compound command
+@var{compound-command} (@pxref{Compound Commands}).
+That command is usually a @var{list} enclosed between @{ and @}, but
+may be any compound command listed above,
+with one exception: If the @code{function} reserved word is used, but the
+parentheses are not supplied, the braces are required.                   
+@var{compound-command} is executed whenever @var{fname} is specified as the
+name of a command.
+When the shell is in @sc{posix} mode (@pxref{Bash POSIX Mode}),
+@var{fname} must be a valid shell @var{name} and
+may not be the same as one of the special builtins
+(@pxref{Special Builtins}).
+In default mode, a function name can be any unquoted shell word that does
+not contain @samp{$}.
+Any redirections (@pxref{Redirections}) associated with the shell function
+are performed when the function is executed.
+A function definition may be deleted using the @option{-f} option to the
+@code{unset} builtin (@pxref{Bourne Shell Builtins}).
+
+The exit status of a function definition is zero unless a syntax error
+occurs or a readonly function with the same name already exists.
+When executed, the exit status of a function is the exit status of the
+last command executed in the body.
+
+Note that for historical reasons, in the most common usage the curly braces
+that surround the body of the function must be separated from the body by
+@code{blank}s or newlines.
+This is because the braces are reserved words and are only recognized
+as such when they are separated from the command list
+by whitespace or another shell metacharacter.
+Also, when using the braces, the @var{list} must be terminated by a semicolon,
+a @samp{&}, or a newline.
+
+When a function is executed, the arguments to the
+function become the positional parameters
+during its execution (@pxref{Positional Parameters}).
+The special parameter @samp{#} that expands to the number of
+positional parameters is updated to reflect the change.
+Special parameter @code{0} is unchanged.
+The first element of the @env{FUNCNAME} variable is set to the
+name of the function while the function is executing.
+
+All other aspects of the shell execution
+environment are identical between a function and its caller
+with these exceptions:
+the @env{DEBUG} and @env{RETURN} traps
+are not inherited unless the function has been given the
+@code{trace} attribute using the @code{declare} builtin or
+the @code{-o functrace} option has been enabled with
+the @code{set} builtin,
+(in which case all functions inherit the @env{DEBUG} and @env{RETURN} traps),
+and the @env{ERR} trap is not inherited unless the @code{-o errtrace}
+shell option has been enabled.
+@xref{Bourne Shell Builtins}, for the description of the
+@code{trap} builtin.
+
+The @env{FUNCNEST} variable, if set to a numeric value greater
+than 0, defines a maximum function nesting level.  Function
+invocations that exceed the limit cause the entire command to
+abort.
+
+If the builtin command @code{return}
+is executed in a function, the function completes and
+execution resumes with the next command after the function
+call.
+Any command associated with the @code{RETURN} trap is executed
+before execution resumes.
+When a function completes, the values of the
+positional parameters and the special parameter @samp{#}
+are restored to the values they had prior to the function's
+execution.  If a numeric argument is given to @code{return},
+that is the function's return status; otherwise the function's
+return status is the exit status of the last command executed
+before the @code{return}.
+
+Variables local to the function may be declared with the
+@code{local} builtin.  These variables are visible only to
+the function and the commands it invokes.  This is particularly
+important when a shell function calls other functions.
+
+Local variables "shadow" variables with the same name declared at
+previous scopes.  For instance, a local variable declared in a function
+hides a global variable of the same name: references and assignments
+refer to the local variable, leaving the global variable unmodified.
+When the function returns, the global variable is once again visible.
+
+The shell uses @var{dynamic scoping} to control a variable's visibility
+within functions.
+With dynamic scoping, visible variables and their values
+are a result of the sequence of function calls that caused execution
+to reach the current function.
+The value of a variable that a function sees depends
+on its value within its caller, if any, whether that caller is
+the "global" scope or another shell function.
+This is also the value that a local variable
+declaration "shadows", and the value that is restored when the function
+returns.
+
+For example, if a variable @var{var} is declared as local in function
+@var{func1}, and @var{func1} calls another function @var{func2},
+references to @var{var} made from within @var{func2} will resolve to the
+local variable @var{var} from @var{func1}, shadowing any global variable
+named @var{var}.
+
+The following script demonstrates this behavior.
+When executed, the script displays
+
+@example
+In func2, var = func1 local
+@end example
+
+@example
+func1()
+@{
+    local var='func1 local'
+    func2
+@}
+
+func2()
+@{
+    echo "In func2, var = $var"
+@}
+
+var=global
+func1
+@end example
+
+The @code{unset} builtin also acts using the same dynamic scope: if a  
+variable is local to the current scope, @code{unset} will unset it;         
+otherwise the unset will refer to the variable found in any calling scope 
+as described above.
+If a variable at the current local scope is unset, it will remain so
+until it is reset in that scope or until the function returns.
+Once the function returns, any instance of the variable at a previous
+scope will become visible.
+If the unset acts on a variable at a previous scope, any instance of a   
+variable with that name that had been shadowed will become visible.
+
+Function names and definitions may be listed with the
+@option{-f} option to the @code{declare} (@code{typeset})
+builtin command (@pxref{Bash Builtins}).
+The @option{-F} option to @code{declare} or @code{typeset}
+will list the function names only
+(and optionally the source file and line number, if the @code{extdebug}
+shell option is enabled).
+Functions may be exported so that subshells
+automatically have them defined with the
+@option{-f} option to the @code{export} builtin
+(@pxref{Bourne Shell Builtins}).
+
+Functions may be recursive.
+The @code{FUNCNEST} variable may be used to limit the depth of the
+function call stack and restrict the number of function invocations.
+By default, no limit is placed on the number of recursive  calls.
+
+@node Shell Parameters
+@section Shell Parameters
+@cindex parameters
+@cindex variable, shell
+@cindex shell variable
+
+@menu
+* Positional Parameters::	The shell's command-line arguments.
+* Special Parameters::		Parameters denoted by special characters.
+@end menu
+
+A @var{parameter} is an entity that stores values.
+It can be a @code{name}, a number, or one of the special characters
+listed below.
+A @var{variable} is a parameter denoted by a @code{name}.
+A variable has a @var{value} and zero or more @var{attributes}.
+Attributes are assigned using the @code{declare} builtin command
+(see the description of the @code{declare} builtin in @ref{Bash Builtins}).
+
+A parameter is set if it has been assigned a value.  The null string is
+a valid value.  Once a variable is set, it may be unset only by using
+the @code{unset} builtin command.
+
+A variable may be assigned to by a statement of the form
+@example
+@var{name}=[@var{value}]
+@end example
+@noindent
+If @var{value}
+is not given, the variable is assigned the null string.  All
+@var{value}s undergo tilde expansion, parameter and variable expansion,
+command substitution, arithmetic expansion, and quote
+removal (detailed below).  If the variable has its @code{integer}
+attribute set, then @var{value} 
+is evaluated as an arithmetic expression even if the @code{$((@dots{}))}
+expansion is not used (@pxref{Arithmetic Expansion}).
+Word splitting is not performed, with the exception
+of @code{"$@@"} as explained below.
+Filename expansion is not performed.
+Assignment statements may also appear as arguments to the
+@code{alias}, 
+@code{declare}, @code{typeset}, @code{export}, @code{readonly},
+and @code{local} builtin commands (@var{declaration} commands).
+When in @sc{posix} mode (@pxref{Bash POSIX Mode}), these builtins may appear
+in a command after one or more instances of the @code{command} builtin
+and retain these assignment statement properties.
+
+In the context where an assignment statement is assigning a value  
+to a shell variable or array index (@pxref{Arrays}), the @samp{+=}
+operator can be used to   
+append to or add to the variable's previous value.
+This includes arguments to builtin commands such as @code{declare} that
+accept assignment statements (@var{declaration} commands).
+When @samp{+=} is applied to a variable for which the @var{integer} attribute
+has been set, @var{value} is evaluated as an arithmetic expression and
+added to the variable's current value, which is also evaluated.
+When @samp{+=} is applied to an array variable using compound assignment
+(@pxref{Arrays}), the
+variable's value is not unset (as it is when using @samp{=}), and new
+values are appended to the array beginning at one greater than the array's
+maximum index (for indexed arrays),  or added as additional key-value pairs
+in an associative array.
+When applied to a string-valued variable, @var{value} is expanded and
+appended to the variable's value.
+
+A variable can be assigned the @var{nameref} attribute using the
+@option{-n} option to the @code{declare} or @code{local} builtin commands
+(@pxref{Bash Builtins})
+to create a @var{nameref}, or a reference to another variable.
+This allows variables to be manipulated indirectly.
+Whenever the nameref variable is referenced, assigned to, unset, or has
+its attributes modified (other than using or changing the nameref
+attribute itself), the
+operation is actually performed on the variable specified by the nameref
+variable's value.
+A nameref is commonly used within shell functions to refer to a variable
+whose name is passed as an argument to the function.
+For instance, if a variable name is passed to a shell function as its first
+argument, running
+@example
+declare -n ref=$1
+@end example
+@noindent
+inside the function creates a nameref variable @var{ref} whose value is
+the variable name passed as the first argument.
+References and assignments to @var{ref}, and changes to its attributes,
+are treated as references, assignments, and attribute modifications
+to the variable whose name was passed as @code{$1}.
+
+If the control variable in a @code{for} loop has the nameref attribute,
+the list of words can be a list of shell variables, and a name reference
+will be established for each word in the list, in turn, when the loop is
+executed.
+Array variables cannot be given the nameref attribute.
+However, nameref variables can reference array variables and subscripted
+array variables.
+Namerefs can be unset using the @option{-n} option to the @code{unset} builtin
+(@pxref{Bourne Shell Builtins}).
+Otherwise, if @code{unset} is executed with the name of a nameref variable
+as an argument, the variable referenced by the nameref variable will be unset.
+
+@node Positional Parameters
+@subsection Positional Parameters
+@cindex parameters, positional
+
+A @var{positional parameter} is a parameter denoted by one or more
+digits, other than the single digit @code{0}.  Positional parameters are
+assigned from the shell's arguments when it is invoked,
+and may be reassigned using the @code{set} builtin command.
+Positional parameter @code{N} may be referenced as @code{$@{N@}}, or
+as @code{$N} when @code{N} consists of a single digit.
+Positional parameters may not be assigned to with assignment statements.
+The @code{set} and @code{shift} builtins are used to set and
+unset them (@pxref{Shell Builtin Commands}).
+The positional parameters are
+temporarily replaced when a shell function is executed
+(@pxref{Shell Functions}).
+
+When a positional parameter consisting of more than a single
+digit is expanded, it must be enclosed in braces.
+
+@node Special Parameters
+@subsection Special Parameters
+@cindex parameters, special
+
+The shell treats several parameters specially.  These parameters may
+only be referenced; assignment to them is not allowed.
+
+@vtable @code
+
+@item *
+@vindex $*
+($*) Expands to the positional parameters, starting from one.
+When the expansion is not within double quotes, each positional parameter
+expands to a separate word.
+In contexts where it is performed, those words
+are subject to further word splitting and filename expansion.
+When the expansion occurs within double quotes, it expands to a single word
+with the value of each parameter separated by the first character of the
+@env{IFS} special variable.  That is, @code{"$*"} is equivalent
+to @code{"$1@var{c}$2@var{c}@dots{}"}, where @var{c}
+is the first character of the value of the @code{IFS}
+variable.
+If @env{IFS} is unset, the parameters are separated by spaces.
+If @env{IFS} is null, the parameters are joined without intervening
+separators.
+
+@item @@
+@vindex $@@
+($@@) Expands to the positional parameters, starting from one.
+In contexts where word splitting is performed, this expands each
+positional parameter to a separate word; if not within double
+quotes, these words are subject to word splitting.
+In contexts where word splitting is not performed,
+this expands to a single word
+with each positional parameter separated by a space.
+When the
+expansion occurs within double quotes, and word splitting is performed,
+each parameter expands to a
+separate word.  That is, @code{"$@@"} is equivalent to
+@code{"$1" "$2" @dots{}}.
+If the double-quoted expansion occurs within a word, the expansion of
+the first parameter is joined with the beginning part of the original
+word, and the expansion of the last parameter is joined with the last
+part of the original word.
+When there are no positional parameters, @code{"$@@"} and
+@code{$@@}
+expand to nothing (i.e., they are removed).
+
+@item #
+@vindex $#
+($#) Expands to the number of positional parameters in decimal.
+
+@item ?
+@vindex $?
+($?) Expands to the exit status of the most recently executed foreground
+pipeline.
+
+@item -
+@vindex $-
+($-, a hyphen.)  Expands to the current option flags as specified upon
+invocation, by the @code{set}
+builtin command, or those set by the shell itself
+(such as the @option{-i} option).
+
+@item $
+@vindex $$
+($$) Expands to the process @sc{id} of the shell.  In a @code{()} subshell, it
+expands to the process @sc{id} of the invoking shell, not the subshell.
+
+@item !
+@vindex $!
+($!) Expands to the process @sc{id} of the job most recently placed into the
+background, whether executed as an asynchronous command or using
+the @code{bg} builtin (@pxref{Job Control Builtins}).
+
+@item 0
+@vindex $0
+($0) Expands to the name of the shell or shell script.  This is set at
+shell initialization.  If Bash is invoked with a file of commands
+(@pxref{Shell Scripts}), @code{$0} is set to the name of that file.
+If Bash is started with the @option{-c} option (@pxref{Invoking Bash}),
+then @code{$0} is set to the first argument after the string to be
+executed, if one is present.  Otherwise, it is set
+to the filename used to invoke Bash, as given by argument zero.
+@end vtable
+
+@node Shell Expansions
+@section Shell Expansions
+@cindex expansion
+
+Expansion is performed on the command line after it has been split into
+@code{token}s.  There are seven kinds of expansion performed:
+
+@itemize @bullet
+@item brace expansion
+@item tilde expansion
+@item parameter and variable expansion
+@item command substitution
+@item arithmetic expansion
+@item word splitting
+@item filename expansion
+@end itemize
+
+@menu
+* Brace Expansion::		Expansion of expressions within braces.
+* Tilde Expansion::		Expansion of the ~ character.
+* Shell Parameter Expansion::	How Bash expands variables to their values.
+* Command Substitution::	Using the output of a command as an argument.
+* Arithmetic Expansion::	How to use arithmetic in shell expansions.
+* Process Substitution::	A way to write and read to and from a
+				command.
+* Word Splitting::	How the results of expansion are split into separate
+			arguments.
+* Filename Expansion::	A shorthand for specifying filenames matching patterns.
+* Quote Removal::	How and when quote characters are removed from
+			words.
+@end menu
+
+The order of expansions is:
+brace expansion;
+tilde expansion, parameter and variable expansion, arithmetic expansion,
+and command substitution (done in a left-to-right fashion);
+word splitting;
+and filename expansion.
+
+On systems that can support it, there is an additional expansion
+available: @var{process substitution}.
+This is performed at the
+same time as tilde, parameter, variable, and arithmetic expansion and
+command substitution.
+
+After these expansions are performed, quote characters present in the
+original word are removed unless they have been quoted themselves
+(@var{quote removal}).
+
+Only brace expansion, word splitting, and filename expansion
+can increase the number of words of the expansion; other expansions
+expand a single word to a single word.
+The only exceptions to this are the expansions of
+@code{"$@@"} and @code{$*} (@pxref{Special Parameters}), and
+@code{"$@{@var{name}[@@]@}"} and @code{$@{@var{name}[*]@}}
+(@pxref{Arrays}).
+
+After all expansions, @code{quote removal} (@pxref{Quote Removal})
+is performed.
+
+@node Brace Expansion
+@subsection Brace Expansion
+@cindex brace expansion
+@cindex expansion, brace
+
+Brace expansion is a mechanism by which arbitrary strings may be generated.
+This mechanism is similar to
+@var{filename expansion} (@pxref{Filename Expansion}),
+but the filenames generated need not exist.
+Patterns to be brace expanded take the form of an optional @var{preamble},
+followed by either a series of comma-separated strings or a sequence expression
+between a pair of braces,
+followed by an optional @var{postscript}.
+The preamble is prefixed to each string contained within the braces, and
+the postscript is then appended to each resulting string, expanding left
+to right.
+
+Brace expansions may be nested.
+The results of each expanded string are not sorted; left to right order
+is preserved.
+For example,
+@example
+bash$ echo a@{d,c,b@}e
+ade ace abe
+@end example
+
+A sequence expression takes the form @code{@{@var{x}..@var{y}[..@var{incr}]@}},
+where @var{x} and @var{y} are either integers or single characters,
+and @var{incr}, an optional increment, is an integer.
+When integers are supplied, the expression expands to each number between
+@var{x} and @var{y}, inclusive.
+Supplied integers may be prefixed with @samp{0} to force each term to have the
+same width.
+When either @var{x} or @var{y} begins with a zero, the shell
+attempts to force all generated terms to contain the same number of digits,
+zero-padding where necessary.
+When characters are supplied, the expression expands to each character
+lexicographically between @var{x} and @var{y}, inclusive,
+using the default C locale.
+Note that both @var{x} and @var{y} must be of the same type.
+When the increment is supplied, it is used as the difference between
+each term.  The default increment is 1 or -1 as appropriate.
+
+Brace expansion is performed before any other expansions,
+and any characters special to other expansions are preserved
+in the result.  It is strictly textual.  Bash
+does not apply any syntactic interpretation to the context of the
+expansion or the text between the braces.
+
+A correctly-formed brace expansion must contain unquoted opening
+and closing braces, and at least one unquoted comma or a valid
+sequence expression.
+Any incorrectly formed brace expansion is left unchanged.
+
+A @{ or @samp{,} may be quoted with a backslash to prevent its
+being considered part of a brace expression.
+To avoid conflicts with parameter expansion, the string @samp{$@{}
+is not considered eligible for brace expansion,
+and inhibits brace expansion until the closing @samp{@}}.
+
+This construct is typically used as shorthand when the common
+prefix of the strings to be generated is longer than in the
+above example:
+@example
+mkdir /usr/local/src/bash/@{old,new,dist,bugs@}
+@end example
+or
+@example
+chown root /usr/@{ucb/@{ex,edit@},lib/@{ex?.?*,how_ex@}@}
+@end example
+
+@node Tilde Expansion
+@subsection Tilde Expansion
+@cindex tilde expansion
+@cindex expansion, tilde
+
+If a word begins with an unquoted tilde character (@samp{~}), all of the
+characters up to the first unquoted slash (or all characters,
+if there is no unquoted slash) are considered a @var{tilde-prefix}.
+If none of the characters in the tilde-prefix are quoted, the
+characters in the tilde-prefix following the tilde are treated as a
+possible @var{login name}.
+If this login name is the null string, the tilde is replaced with the
+value of the @env{HOME} shell variable.
+If @env{HOME} is unset, the home directory of the user executing the
+shell is substituted instead.
+Otherwise, the tilde-prefix is replaced with the home directory
+associated with the specified login name.
+
+If the tilde-prefix is @samp{~+}, the value of
+the shell variable @env{PWD} replaces the tilde-prefix.
+If the tilde-prefix is @samp{~-}, the value of the shell variable
+@env{OLDPWD}, if it is set, is substituted.
+
+If the characters following the tilde in the tilde-prefix consist of a
+number @var{N}, optionally prefixed by a @samp{+} or a @samp{-},
+the tilde-prefix is replaced with the
+corresponding element from the directory stack, as it would be displayed
+by the @code{dirs} builtin invoked with the characters following tilde
+in the tilde-prefix as an argument (@pxref{The Directory Stack}).
+If the tilde-prefix, sans the tilde, consists of a number without a
+leading @samp{+} or @samp{-}, @samp{+} is assumed.
+
+If the login name is invalid, or the tilde expansion fails, the word is
+left unchanged.
+
+Each variable assignment is checked for unquoted tilde-prefixes immediately
+following a @samp{:} or the first @samp{=}.
+In these cases, tilde expansion is also performed.
+Consequently, one may use filenames with tildes in assignments to
+@env{PATH}, @env{MAILPATH}, and @env{CDPATH},
+and the shell assigns the expanded value.
+
+The following table shows how Bash treats unquoted tilde-prefixes:
+
+@table @code
+@item ~
+The value of @code{$HOME}
+@item ~/foo
+@file{$HOME/foo}
+
+@item ~fred/foo
+The subdirectory @code{foo} of the home directory of the user
+@code{fred}
+
+@item ~+/foo
+@file{$PWD/foo}
+
+@item ~-/foo
+@file{$@{OLDPWD-'~-'@}/foo}
+
+@item ~@var{N}
+The string that would be displayed by @samp{dirs +@var{N}}
+
+@item ~+@var{N}
+The string that would be displayed by @samp{dirs +@var{N}}
+
+@item ~-@var{N}
+The string that would be displayed by @samp{dirs -@var{N}}
+@end table
+
+Bash also performs tilde expansion on words satisfying the conditions of
+variable assignments (@pxref{Shell Parameters})
+when they appear as arguments to simple commands.
+Bash does not do this, except for the @var{declaration} commands listed
+above, when in @sc{posix} mode.
+
+@node Shell Parameter Expansion
+@subsection Shell Parameter Expansion
+@cindex parameter expansion
+@cindex expansion, parameter
+
+The @samp{$} character introduces parameter expansion,
+command substitution, or arithmetic expansion.  The parameter name
+or symbol to be expanded may be enclosed in braces, which
+are optional but serve to protect the variable to be expanded from
+characters immediately following it which could be
+interpreted as part of the name.
+
+When braces are used, the matching ending brace is the first @samp{@}}
+not escaped by a backslash or within a quoted string, and not within an
+embedded arithmetic expansion, command substitution, or parameter
+expansion.
+
+The basic form of parameter expansion is $@{@var{parameter}@}.
+The value of @var{parameter} is substituted.
+The @var{parameter} is a shell parameter as described above
+(@pxref{Shell Parameters}) or an array reference (@pxref{Arrays}).
+The braces are required when @var{parameter}
+is a positional parameter with more than one digit,
+or when @var{parameter} is followed by a character that is not to be
+interpreted as part of its name.
+
+If the first character of @var{parameter} is an exclamation point (!),
+and @var{parameter} is not a @var{nameref},
+it introduces a level of indirection.
+Bash uses the value formed by expanding the rest of
+@var{parameter} as the new @var{parameter}; this is then
+expanded and that value is used in the rest of the expansion, rather
+than the expansion of the original @var{parameter}.
+This is known as @code{indirect expansion}.
+The value is subject to tilde expansion,
+parameter expansion, command substitution, and arithmetic expansion.
+If @var{parameter} is a nameref, this expands to the name of the
+variable referenced by @var{parameter} instead of performing the
+complete indirect expansion.
+The exceptions to this are the expansions of $@{!@var{prefix}*@}
+and $@{!@var{name}[@@]@}
+described below.
+The exclamation point must immediately follow the left brace in order to
+introduce indirection.
+
+In each of the cases below, @var{word} is subject to tilde expansion,
+parameter expansion, command substitution, and arithmetic expansion.
+
+When not performing substring expansion, using the form described
+below (e.g., @samp{:-}), Bash tests for a parameter that is unset or null.
+Omitting the colon results in a test only for a parameter that is unset.
+Put another way, if the colon is included,
+the operator tests for both @var{parameter}'s existence and that its value
+is not null; if the colon is omitted, the operator tests only for existence.
+
+@table @code
+
+@item $@{@var{parameter}:@minus{}@var{word}@}
+If @var{parameter} is unset or null, the expansion of
+@var{word} is substituted.  Otherwise, the value of
+@var{parameter} is substituted.
+
+@item $@{@var{parameter}:=@var{word}@}
+If @var{parameter}
+is unset or null, the expansion of @var{word}
+is assigned to @var{parameter}.
+The value of @var{parameter} is then substituted. 
+Positional parameters and special parameters may not be assigned to
+in this way.
+
+@item $@{@var{parameter}:?@var{word}@}
+If @var{parameter}
+is null or unset, the expansion of @var{word} (or a message
+to that effect if @var{word}
+is not present) is written to the standard error and the shell, if it
+is not interactive, exits.  Otherwise, the value of @var{parameter} is
+substituted.
+
+@item $@{@var{parameter}:+@var{word}@}
+If @var{parameter}
+is null or unset, nothing is substituted, otherwise the expansion of
+@var{word} is substituted.
+
+@item $@{@var{parameter}:@var{offset}@}
+@itemx $@{@var{parameter}:@var{offset}:@var{length}@}
+This is referred to as Substring Expansion.
+It expands to up to @var{length} characters of the value of @var{parameter}
+starting at the character specified by @var{offset}.
+If @var{parameter} is @samp{@@}, an indexed array subscripted by
+@samp{@@} or @samp{*}, or an associative array name, the results differ as
+described below.
+If @var{length} is omitted, it expands to the substring of the value of
+@var{parameter} starting at the character specified by @var{offset}
+and extending to the end of the value.
+@var{length} and @var{offset} are arithmetic expressions
+(@pxref{Shell Arithmetic}).
+
+If @var{offset} evaluates to a number less than zero, the value
+is used as an offset in characters
+from the end of the value of @var{parameter}.
+If @var{length} evaluates to a number less than zero,
+it is interpreted as an offset in characters
+from the end of the value of @var{parameter} rather than
+a number of characters, and the expansion is the characters between
+@var{offset} and that result.
+Note that a negative offset must be separated from the colon by at least
+one space to avoid being confused with the @samp{:-} expansion.
+
+Here are some examples illustrating substring expansion on parameters and
+subscripted arrays:
+
+@verbatim
+$ string=01234567890abcdefgh
+$ echo ${string:7}
+7890abcdefgh
+$ echo ${string:7:0}
+
+$ echo ${string:7:2}
+78
+$ echo ${string:7:-2}
+7890abcdef
+$ echo ${string: -7}
+bcdefgh
+$ echo ${string: -7:0}
+
+$ echo ${string: -7:2}
+bc
+$ echo ${string: -7:-2}
+bcdef
+$ set -- 01234567890abcdefgh
+$ echo ${1:7}
+7890abcdefgh
+$ echo ${1:7:0}
+
+$ echo ${1:7:2}
+78
+$ echo ${1:7:-2}
+7890abcdef
+$ echo ${1: -7}
+bcdefgh
+$ echo ${1: -7:0}
+
+$ echo ${1: -7:2}
+bc
+$ echo ${1: -7:-2}
+bcdef
+$ array[0]=01234567890abcdefgh
+$ echo ${array[0]:7}
+7890abcdefgh
+$ echo ${array[0]:7:0}
+
+$ echo ${array[0]:7:2}
+78
+$ echo ${array[0]:7:-2}
+7890abcdef
+$ echo ${array[0]: -7}
+bcdefgh
+$ echo ${array[0]: -7:0}
+
+$ echo ${array[0]: -7:2}
+bc
+$ echo ${array[0]: -7:-2}
+bcdef
+@end verbatim
+
+If @var{parameter} is @samp{@@}, the result is @var{length} positional
+parameters beginning at @var{offset}.
+A negative @var{offset} is taken relative to one greater than the greatest
+positional parameter, so an offset of -1 evaluates to the last positional
+parameter.
+It is an expansion error if @var{length} evaluates to a number less than zero.
+
+The following examples illustrate substring expansion using positional
+parameters:
+
+@verbatim
+$ set -- 1 2 3 4 5 6 7 8 9 0 a b c d e f g h
+$ echo ${@:7}
+7 8 9 0 a b c d e f g h
+$ echo ${@:7:0}
+
+$ echo ${@:7:2}
+7 8
+$ echo ${@:7:-2}
+bash: -2: substring expression < 0
+$ echo ${@: -7:2}
+b c
+$ echo ${@:0}
+./bash 1 2 3 4 5 6 7 8 9 0 a b c d e f g h
+$ echo ${@:0:2}
+./bash 1
+$ echo ${@: -7:0}
+
+@end verbatim
+
+If @var{parameter} is an indexed array name subscripted
+by @samp{@@} or @samp{*}, the result is the @var{length}
+members of the array beginning with @code{$@{@var{parameter}[@var{offset}]@}}.
+A negative @var{offset} is taken relative to one greater than the maximum
+index of the specified array.
+It is an expansion error if @var{length} evaluates to a number less than zero.
+
+These examples show how you can use substring expansion with indexed
+arrays:
+
+@verbatim
+$ array=(0 1 2 3 4 5 6 7 8 9 0 a b c d e f g h)
+$ echo ${array[@]:7}
+7 8 9 0 a b c d e f g h
+$ echo ${array[@]:7:2}
+7 8
+$ echo ${array[@]: -7:2}
+b c
+$ echo ${array[@]: -7:-2}
+bash: -2: substring expression < 0
+$ echo ${array[@]:0}
+0 1 2 3 4 5 6 7 8 9 0 a b c d e f g h
+$ echo ${array[@]:0:2}
+0 1
+$ echo ${array[@]: -7:0}
+
+@end verbatim
+
+Substring expansion applied to an associative array produces undefined
+results.
+
+Substring indexing is zero-based unless the positional parameters
+are used, in which case the indexing starts at 1 by default.
+If @var{offset} is 0, and the positional parameters are used, @code{$0} is
+prefixed to the list.
+
+@item $@{!@var{prefix}*@}
+@itemx $@{!@var{prefix}@@@}
+Expands to the names of variables whose names begin with @var{prefix},
+separated by the first character of the @env{IFS} special variable.
+When @samp{@@} is used and the expansion appears within double quotes, each
+variable name expands to a separate word.
+
+@item $@{!@var{name}[@@]@}
+@itemx $@{!@var{name}[*]@}
+If @var{name} is an array variable, expands to the list of array indices
+(keys) assigned in @var{name}.
+If @var{name} is not an array, expands to 0 if @var{name} is set and null
+otherwise.
+When @samp{@@} is used and the expansion appears within double quotes, each
+key expands to a separate word.
+
+@item $@{#@var{parameter}@}
+The length in characters of the expanded value of @var{parameter} is
+substituted.
+If @var{parameter} is @samp{*} or @samp{@@}, the value substituted
+is the number of positional parameters.
+If @var{parameter} is an array name subscripted by @samp{*} or @samp{@@}, 
+the value substituted is the number of elements in the array.
+If @var{parameter}
+is an indexed array name subscripted by a negative number, that number is
+interpreted as relative to one greater than the maximum index of
+@var{parameter}, so negative indices count back from the end of the
+array, and an index of -1 references the last element.
+
+@item $@{@var{parameter}#@var{word}@}
+@itemx $@{@var{parameter}##@var{word}@}
+The @var{word}
+is expanded to produce a pattern and matched according to the rules
+described below (@pxref{Pattern Matching}).  If the pattern matches
+the beginning of the expanded value of @var{parameter},
+then the result of the expansion is the expanded value of @var{parameter}
+with the shortest matching pattern (the @samp{#} case) or the
+longest matching pattern (the @samp{##} case) deleted.
+If @var{parameter} is @samp{@@} or @samp{*},
+the pattern removal operation is applied to each positional
+parameter in turn, and the expansion is the resultant list.
+If @var{parameter} is an array variable subscripted with
+@samp{@@} or @samp{*},
+the pattern removal operation is applied to each member of the
+array in turn, and the expansion is the resultant list.
+
+@item $@{@var{parameter}%@var{word}@}
+@itemx $@{@var{parameter}%%@var{word}@}
+The @var{word}
+is expanded to produce a pattern and matched according to the rules
+described below (@pxref{Pattern Matching}).
+If the pattern matches a trailing portion of the expanded value of
+@var{parameter}, then the result of the expansion is the value of
+@var{parameter} with the shortest matching pattern (the @samp{%} case)
+or the longest matching pattern (the @samp{%%} case) deleted.
+If @var{parameter} is @samp{@@} or @samp{*},
+the pattern removal operation is applied to each positional
+parameter in turn, and the expansion is the resultant list.
+If @var{parameter}
+is an array variable subscripted with @samp{@@} or @samp{*},
+the pattern removal operation is applied to each member of the
+array in turn, and the expansion is the resultant list.
+
+@item $@{@var{parameter}/@var{pattern}/@var{string}@} 
+
+The @var{pattern} is expanded to produce a pattern just as in
+filename expansion.
+@var{Parameter} is expanded and the longest match of @var{pattern}
+against its value is replaced with @var{string}.
+The match is performed according to the rules described below
+(@pxref{Pattern Matching}).
+If @var{pattern} begins with @samp{/}, all matches of @var{pattern} are
+replaced with @var{string}.  Normally only the first match is replaced.
+If @var{pattern} begins with @samp{#}, it must match at the beginning
+of the expanded value of @var{parameter}.
+If @var{pattern} begins with @samp{%}, it must match at the end
+of the expanded value of @var{parameter}.
+If @var{string} is null, matches of @var{pattern} are deleted
+and the @code{/} following @var{pattern} may be omitted.
+If the @code{nocasematch} shell option   
+(see the description of @code{shopt} in @ref{The Shopt Builtin})
+is enabled, the match is performed without regard to the case   
+of alphabetic characters.
+If @var{parameter} is @samp{@@} or @samp{*},
+the substitution operation is applied to each positional
+parameter in turn, and the expansion is the resultant list.
+If @var{parameter}
+is an array variable subscripted with @samp{@@} or @samp{*},
+the substitution operation is applied to each member of the
+array in turn, and the expansion is the resultant list.
+
+@item $@{@var{parameter}^@var{pattern}@}
+@itemx $@{@var{parameter}^^@var{pattern}@}
+@itemx $@{@var{parameter},@var{pattern}@}
+@itemx $@{@var{parameter},,@var{pattern}@}
+This expansion modifies the case of alphabetic characters in @var{parameter}.
+The @var{pattern} is expanded to produce a pattern just as in
+filename expansion.
+Each character in the expanded value of @var{parameter} is tested against
+@var{pattern}, and, if it matches the pattern, its case is converted.
+The pattern should not attempt to match more than one character.
+The @samp{^} operator converts lowercase letters matching @var{pattern}
+to uppercase; the @samp{,} operator converts matching uppercase letters
+to lowercase.
+The @samp{^^} and @samp{,,} expansions convert each matched character in the
+expanded value; the @samp{^} and @samp{,} expansions match and convert only
+the first character in the expanded value.
+If @var{pattern} is omitted, it is treated like a @samp{?}, which matches
+every character.
+If @var{parameter} is @samp{@@} or @samp{*},
+the case modification operation is applied to each positional
+parameter in turn, and the expansion is the resultant list.
+If @var{parameter}
+is an array variable subscripted with @samp{@@} or @samp{*},
+the case modification operation is applied to each member of the
+array in turn, and the expansion is the resultant list.
+
+@item $@{@var{parameter}@@@var{operator}@}
+The expansion is either a transformation of the value of @var{parameter}
+or information about @var{parameter} itself, depending on the value of
+@var{operator}.  Each @var{operator} is a single letter:
+
+@table @code
+@item U
+The expansion is a string that is the value of @var{parameter} with lowercase
+alphabetic characters converted to uppercase.
+@item u
+The expansion is a string that is the value of @var{parameter} with the first
+character converted to uppercase, if it is alphabetic.
+@item L
+The expansion is a string that is the value of @var{parameter} with uppercase
+alphabetic characters converted to lowercase.
+@item Q
+The expansion is a string that is the value of @var{parameter} quoted in a
+format that can be reused as input.
+@item E
+The expansion is a string that is the value of @var{parameter} with backslash
+escape sequences expanded as with the @code{$'@dots{}'} quoting mechanism.
+@item P
+The expansion is a string that is the result of expanding the value of
+@var{parameter} as if it were a prompt string (@pxref{Controlling the Prompt}).
+@item A
+The expansion is a string in the form of
+an assignment statement or @code{declare} command that, if
+evaluated, will recreate @var{parameter} with its attributes and value.
+@item K
+Produces a possibly-quoted version of the value of @var{parameter},
+except that it prints the values of
+indexed and associative arrays as a sequence of quoted key-value pairs
+(@pxref{Arrays}).
+@item a
+The expansion is a string consisting of flag values representing
+@var{parameter}'s attributes.
+@end table
+
+If @var{parameter} is @samp{@@} or @samp{*},
+the operation is applied to each positional
+parameter in turn, and the expansion is the resultant list.
+If @var{parameter}
+is an array variable subscripted with @samp{@@} or @samp{*},
+the operation is applied to each member of the
+array in turn, and the expansion is the resultant list.
+
+The result of the expansion is subject to word splitting and filename
+expansion as described below.
+@end table
+
+@node Command Substitution
+@subsection Command Substitution
+@cindex command substitution
+
+Command substitution allows the output of a command to replace
+the command itself.
+Command substitution occurs when a command is enclosed as follows:
+@example
+$(@var{command})
+@end example
+@noindent
+or
+@example
+`@var{command}`
+@end example
+
+@noindent
+Bash performs the expansion by executing @var{command} in a subshell environment
+and replacing the command substitution with the standard output of the
+command, with any trailing newlines deleted.
+Embedded newlines are not deleted, but they may be removed during
+word splitting.
+The command substitution @code{$(cat @var{file})} can be
+replaced by the equivalent but faster @code{$(< @var{file})}.
+
+When the old-style backquote form of substitution is used,
+backslash retains its literal meaning except when followed by
+@samp{$}, @samp{`}, or @samp{\}. 
+The first backquote not preceded by a backslash terminates the
+command substitution.
+When using the @code{$(@var{command})} form, all characters between
+the parentheses make up the command; none are treated specially.
+
+Command substitutions may be nested.  To nest when using the backquoted
+form, escape the inner backquotes with backslashes.
+
+If the substitution appears within double quotes, word splitting and
+filename expansion are not performed on the results.
+
+@node Arithmetic Expansion
+@subsection Arithmetic Expansion
+@cindex expansion, arithmetic
+@cindex arithmetic expansion
+
+Arithmetic expansion allows the evaluation of an arithmetic expression
+and the substitution of the result.  The format for arithmetic expansion is:
+
+@example
+$(( @var{expression} ))
+@end example
+
+The expression is treated as if it were within double quotes, but
+a double quote inside the parentheses is not treated specially.
+All tokens in the expression undergo parameter and variable expansion,
+command substitution, and quote removal.
+The result is treated as the arithmetic expression to be evaluated.
+Arithmetic expansions may be nested. 
+
+The evaluation is performed according to the rules listed below
+(@pxref{Shell Arithmetic}).
+If the expression is invalid, Bash prints a message indicating
+failure to the standard error and no substitution occurs.
+
+@node Process Substitution
+@subsection Process Substitution
+@cindex process substitution
+
+Process substitution allows a process's input or output to be
+referred to using a filename.
+It takes the form of 
+@example
+<(@var{list})
+@end example
+@noindent
+or
+@example
+>(@var{list})
+@end example
+@noindent
+The process @var{list} is run asynchronously, and its input or output 
+appears as a filename.
+This filename is
+passed as an argument to the current command as the result of the
+expansion.
+If the @code{>(@var{list})} form is used, writing to
+the file will provide input for @var{list}.  If the
+@code{<(@var{list})} form is used, the file passed as an
+argument should be read to obtain the output of @var{list}.
+Note that no space may appear between the @code{<} or @code{>}
+and the left parenthesis, otherwise the construct would be interpreted
+as a redirection.
+Process substitution is supported on systems that support named
+pipes (@sc{fifo}s) or the @file{/dev/fd} method of naming open files.
+
+When available, process substitution is performed simultaneously with
+parameter and variable expansion, command substitution, and arithmetic
+expansion.
+
+@node Word Splitting
+@subsection Word Splitting
+@cindex word splitting
+
+The shell scans the results of parameter expansion, command substitution,
+and arithmetic expansion that did not occur within double quotes for
+word splitting.
+
+The shell treats each character of @env{$IFS} as a delimiter, and splits
+the results of the other expansions into words using these characters
+as field terminators.
+If @env{IFS} is unset, or its value is exactly @code{<space><tab><newline>},
+the default, then sequences of
+@code{ <space>}, @code{<tab>}, and @code{<newline>}
+at the beginning and end of the results of the previous
+expansions are ignored, and any sequence of @env{IFS}
+characters not at the beginning or end serves to delimit words.
+If @env{IFS} has a value other than the default, then sequences of
+the whitespace characters @code{space}, @code{tab}, and @code{newline}
+are ignored at the beginning and end of the
+word, as long as the whitespace character is in the
+value of @env{IFS} (an @env{IFS} whitespace character).
+Any character in @env{IFS} that is not @env{IFS}
+whitespace, along with any adjacent @env{IFS}
+whitespace characters, delimits a field.  A sequence of @env{IFS}
+whitespace characters is also treated as a delimiter.
+If the value of @env{IFS} is null, no word splitting occurs.
+
+Explicit null arguments (@code{""} or @code{''}) are retained
+and passed to commands as empty strings.
+Unquoted implicit null arguments, resulting from the expansion of
+parameters that have no values, are removed.
+If a parameter with no value is expanded within double quotes, a
+null argument results and is retained
+and passed to a command as an empty string.
+When a quoted null argument appears as part of a word whose expansion is
+non-null, the null argument is removed.
+That is, the word
+@code{-d''} becomes @code{-d} after word splitting and
+null argument removal.
+
+Note that if no expansion occurs, no splitting
+is performed.
+
+@node Filename Expansion
+@subsection Filename Expansion
+@menu
+* Pattern Matching::	How the shell matches patterns.
+@end menu
+@cindex expansion, filename
+@cindex expansion, pathname
+@cindex filename expansion
+@cindex pathname expansion
+
+After word splitting, unless the @option{-f} option has been set
+(@pxref{The Set Builtin}), Bash scans each word for the characters
+@samp{*}, @samp{?}, and @samp{[}.
+If one of these characters appears, and is not quoted, then the word is
+regarded as a @var{pattern},
+and replaced with an alphabetically sorted list of
+filenames matching the pattern (@pxref{Pattern Matching}).
+If no matching filenames are found,
+and the shell option @code{nullglob} is disabled, the word is left
+unchanged.
+If the @code{nullglob} option is set, and no matches are found, the word
+is removed.
+If the @code{failglob} shell option is set, and no matches are found,
+an error message is printed and the command is not executed.
+If the shell option @code{nocaseglob} is enabled, the match is performed
+without regard to the case of alphabetic characters.
+
+When a pattern is used for filename expansion, the character @samp{.}
+at the start of a filename or immediately following a slash
+must be matched explicitly, unless the shell option @code{dotglob} is set.
+The filenames @samp{.} and @samp{..} must always be matched explicitly,
+even if @code{dotglob} is set.
+In other cases, the @samp{.} character is not treated specially.
+
+When matching a filename, the slash character must always be
+matched explicitly by a slash in the pattern, but in other matching
+contexts it can be matched by a special pattern character as described
+below (@pxref{Pattern Matching}).
+
+See the description of @code{shopt} in @ref{The Shopt Builtin},
+for a description of the @code{nocaseglob}, @code{nullglob},
+@code{failglob}, and @code{dotglob} options.
+
+The @env{GLOBIGNORE}
+shell variable may be used to restrict the set of file names matching a
+pattern.  If @env{GLOBIGNORE}
+is set, each matching file name that also matches one of the patterns in
+@env{GLOBIGNORE} is removed from the list of matches.
+If the @code{nocaseglob} option is set, the matching against the patterns in
+@env{GLOBIGNORE} is performed without regard to case.
+The filenames
+@file{.} and @file{..}
+are always ignored when @env{GLOBIGNORE}
+is set and not null.
+However, setting @env{GLOBIGNORE} to a non-null value has the effect of
+enabling the @code{dotglob}
+shell option, so all other filenames beginning with a
+@samp{.} will match.
+To get the old behavior of ignoring filenames beginning with a
+@samp{.}, make @samp{.*} one of the patterns in @env{GLOBIGNORE}.
+The @code{dotglob} option is disabled when @env{GLOBIGNORE}
+is unset.
+
+@node Pattern Matching
+@subsubsection Pattern Matching
+@cindex pattern matching
+@cindex matching, pattern
+
+Any character that appears in a pattern, other than the special pattern
+characters described below, matches itself.
+The @sc{nul} character may not occur in a pattern.
+A backslash escapes the following character; the
+escaping backslash is discarded when matching.
+The special pattern characters must be quoted if they are to be matched
+literally.
+
+The special pattern characters have the following meanings:
+@table @code
+@item *
+Matches any string, including the null string.
+When the @code{globstar} shell option is enabled, and @samp{*} is used in
+a filename expansion context, two adjacent @samp{*}s used as a single
+pattern will match all files and zero or more directories and
+subdirectories.
+If followed by a @samp{/}, two adjacent @samp{*}s will match only
+directories and subdirectories.
+@item ?
+Matches any single character.
+@item [@dots{}]
+Matches any one of the enclosed characters.  A pair of characters
+separated by a hyphen denotes a @var{range expression};
+any character that falls between those two characters, inclusive,
+using the current locale's collating sequence and character set,
+is matched.  If the first character following the
+@samp{[} is a @samp{!}  or a @samp{^}
+then any character not enclosed is matched.  A @samp{@minus{}}
+may be matched by including it as the first or last character
+in the set.  A @samp{]} may be matched by including it as the first
+character in the set.
+The sorting order of characters in range expressions is determined by
+the current locale and the values of the
+@env{LC_COLLATE} and @env{LC_ALL} shell variables, if set.
+
+For example, in the default C locale, @samp{[a-dx-z]} is equivalent to
+@samp{[abcdxyz]}.  Many locales sort characters in dictionary order, and in
+these locales @samp{[a-dx-z]} is typically not equivalent to @samp{[abcdxyz]};
+it might be equivalent to @samp{[aBbCcDdxXyYz]}, for example.  To obtain
+the traditional interpretation of ranges in bracket expressions, you can
+force the use of the C locale by setting the @env{LC_COLLATE} or
+@env{LC_ALL} environment variable to the value @samp{C}, or enable the
+@code{globasciiranges} shell option.
+
+Within @samp{[} and @samp{]}, @var{character classes} can be specified
+using the syntax
+@code{[:}@var{class}@code{:]}, where @var{class} is one of the
+following classes defined in the @sc{posix} standard:
+@example
+alnum   alpha   ascii   blank   cntrl   digit   graph   lower
+print   punct   space   upper   word    xdigit
+@end example
+@noindent
+A character class matches any character belonging to that class.
+The @code{word} character class matches letters, digits, and the character
+@samp{_}.
+
+Within @samp{[} and @samp{]}, an @var{equivalence class} can be
+specified using the syntax @code{[=}@var{c}@code{=]}, which
+matches all characters with the same collation weight (as defined
+by the current locale) as the character @var{c}.
+
+Within @samp{[} and @samp{]}, the syntax @code{[.}@var{symbol}@code{.]}
+matches the collating symbol @var{symbol}.
+@end table
+
+If the @code{extglob} shell option is enabled using the @code{shopt}
+builtin, several extended pattern matching operators are recognized.
+In the following description, a @var{pattern-list} is a list of one
+or more patterns separated by a @samp{|}.
+Composite patterns may be formed using one or more of the following
+sub-patterns:
+
+@table @code
+@item ?(@var{pattern-list})
+Matches zero or one occurrence of the given patterns.
+
+@item *(@var{pattern-list})
+Matches zero or more occurrences of the given patterns.
+
+@item +(@var{pattern-list})
+Matches one or more occurrences of the given patterns.
+
+@item @@(@var{pattern-list})
+Matches one of the given patterns.
+
+@item !(@var{pattern-list})
+Matches anything except one of the given patterns.
+@end table
+
+Complicated extended pattern matching against long strings is slow,
+especially when the patterns contain alternations and the strings
+contain multiple matches.
+Using separate matches against shorter strings, or using arrays of
+strings instead of a single long string, may be faster.
+
+@node Quote Removal
+@subsection Quote Removal
+
+After the preceding expansions, all unquoted occurrences of the
+characters @samp{\}, @samp{'}, and @samp{"} that did not
+result from one of the above expansions are removed.
+
+@node Redirections
+@section Redirections
+@cindex redirection
+
+Before a command is executed, its input and output
+may be @var{redirected}
+using a special notation interpreted by the shell.
+Redirection allows commands' file handles to be
+duplicated, opened, closed,
+made to refer to different files,
+and can change the files the command reads from and writes to.
+Redirection may also be used to modify file handles in the
+current shell execution environment.  The following redirection
+operators may precede or appear anywhere within a
+simple command or may follow a command.
+Redirections are processed in the order they appear, from
+left to right.
+
+Each redirection that may be preceded by a file descriptor number
+may instead be preceded by a word of the form @{@var{varname}@}.
+In this case, for each redirection operator except
+>&- and <&-, the shell will allocate a file descriptor greater
+than 10 and assign it to @{@var{varname}@}.  If >&- or <&- is preceded
+by @{@var{varname}@}, the value of @var{varname} defines the file
+descriptor to close.
+If @{@var{varname}@} is supplied, the redirection persists beyond
+the scope of the command, allowing the shell programmer to manage
+the file descriptor's lifetime manually.
+
+In the following descriptions, if the file descriptor number is
+omitted, and the first character of the redirection operator is
+@samp{<}, the redirection refers to the standard input (file
+descriptor 0).  If the first character of the redirection operator
+is @samp{>}, the redirection refers to the standard output (file
+descriptor 1).
+
+The word following the redirection operator in the following
+descriptions, unless otherwise noted, is subjected to brace expansion,
+tilde expansion, parameter expansion, command substitution, arithmetic
+expansion, quote removal, filename expansion, and word splitting.
+If it expands to more than one word, Bash reports an error.
+
+Note that the order of redirections is significant.  For example,
+the command
+@example
+ls > @var{dirlist} 2>&1
+@end example
+@noindent
+directs both standard output (file descriptor 1) and standard error
+(file descriptor 2) to the file @var{dirlist}, while the command
+@example
+ls 2>&1 > @var{dirlist}
+@end example
+@noindent
+directs only the standard output to file @var{dirlist},
+because the standard error was made a copy of the standard output
+before the standard output was redirected to @var{dirlist}.
+
+Bash handles several filenames specially when they are used in
+redirections, as described in the following table.
+If the operating system on which Bash is running provides these
+special files, bash will use them; otherwise it will emulate them
+internally with the behavior described below.
+
+@table @code
+@item /dev/fd/@var{fd}
+If @var{fd} is a valid integer, file descriptor @var{fd} is duplicated.
+
+@item /dev/stdin
+File descriptor 0 is duplicated.
+
+@item /dev/stdout
+File descriptor 1 is duplicated.
+
+@item /dev/stderr
+File descriptor 2 is duplicated.
+
+@item /dev/tcp/@var{host}/@var{port}
+If @var{host} is a valid hostname or Internet address, and @var{port}
+is an integer port number or service name, Bash attempts to open
+the corresponding TCP socket.
+
+@item /dev/udp/@var{host}/@var{port}
+If @var{host} is a valid hostname or Internet address, and @var{port}
+is an integer port number or service name, Bash attempts to open 
+the corresponding UDP socket.
+@end table
+
+A failure to open or create a file causes the redirection to fail.
+
+Redirections using file descriptors greater than 9 should be used with
+care, as they may conflict with file descriptors the shell uses
+internally.
+
+@subsection Redirecting Input
+Redirection of input causes the file whose name results from
+the expansion of @var{word}
+to be opened for reading on file descriptor @code{n},
+or the standard input (file descriptor 0) if @code{n}
+is not specified.
+
+The general format for redirecting input is:
+@example
+[@var{n}]<@var{word}
+@end example
+
+@subsection Redirecting Output
+Redirection of output causes the file whose name results from
+the expansion of @var{word}
+to be opened for writing on file descriptor @var{n},
+or the standard output (file descriptor 1) if @var{n}
+is not specified.  If the file does not exist it is created;
+if it does exist it is truncated to zero size.
+
+The general format for redirecting output is:
+@example
+[@var{n}]>[|]@var{word}
+@end example
+
+If the redirection operator is @samp{>}, and the @code{noclobber}
+option to the @code{set} builtin has been enabled, the redirection
+will fail if the file whose name results from the expansion of
+@var{word} exists and is a regular file.
+If the redirection operator is @samp{>|}, or the redirection operator is
+@samp{>} and the @code{noclobber} option is not enabled, the redirection
+is attempted even if the file named by @var{word} exists.
+
+@subsection Appending Redirected Output
+Redirection of output in this fashion
+causes the file whose name results from
+the expansion of @var{word}
+to be opened for appending on file descriptor @var{n},
+or the standard output (file descriptor 1) if @var{n}
+is not specified.  If the file does not exist it is created.
+
+The general format for appending output is:
+@example
+[@var{n}]>>@var{word}
+@end example
+
+@subsection Redirecting Standard Output and Standard Error
+This construct allows both the
+standard output (file descriptor 1) and
+the standard error output (file descriptor 2)
+to be redirected to the file whose name is the
+expansion of @var{word}.
+
+There are two formats for redirecting standard output and
+standard error:
+@example
+&>@var{word}
+@end example
+@noindent
+and
+@example
+>&@var{word}
+@end example
+@noindent
+Of the two forms, the first is preferred.
+This is semantically equivalent to
+@example
+>@var{word} 2>&1
+@end example
+When using the second form, @var{word} may not expand to a number or
+@samp{-}.  If it does, other redirection operators apply
+(see Duplicating File Descriptors below) for compatibility reasons.
+
+@subsection Appending Standard Output and Standard Error
+This construct allows both the
+standard output (file descriptor 1) and
+the standard error output (file descriptor 2)
+to be appended to the file whose name is the
+expansion of @var{word}.
+
+The format for appending standard output and standard error is:
+@example
+&>>@var{word}
+@end example
+@noindent
+This is semantically equivalent to
+@example
+>>@var{word} 2>&1
+@end example
+(see Duplicating File Descriptors below).
+
+@subsection Here Documents
+This type of redirection instructs the shell to read input from the
+current source until a line containing only @var{word}
+(with no trailing blanks) is seen.  All of
+the lines read up to that point are then used as the standard
+input (or file descriptor @var{n} if @var{n} is specified) for a command.
+
+The format of here-documents is:
+@example
+[@var{n}]<<[@minus{}]@var{word}
+        @var{here-document}
+@var{delimiter}
+@end example
+
+No parameter and variable expansion, command substitution,
+arithmetic expansion, or filename expansion is performed on
+@var{word}.  If any part of @var{word} is quoted, the
+@var{delimiter} is the result of quote removal on @var{word},
+and the lines in the here-document are not expanded.
+If @var{word} is unquoted,
+all lines of the here-document are subjected to
+parameter expansion, command substitution, and arithmetic expansion,
+the character sequence @code{\newline} is ignored, and @samp{\}
+must be used to quote the characters
+@samp{\}, @samp{$}, and @samp{`}.
+
+If the redirection operator is @samp{<<-},
+then all leading tab characters are stripped from input lines and the
+line containing @var{delimiter}.
+This allows here-documents within shell scripts to be indented in a
+natural fashion.
+
+@subsection Here Strings
+A variant of here documents, the format is:
+@example
+[@var{n}]<<< @var{word}
+@end example
+
+The @var{word} undergoes
+tilde expansion, parameter and variable expansion,
+command substitution, arithmetic expansion, and quote removal.
+Filename expansion and word splitting are not performed.
+The result is supplied as a single string,
+with a newline appended,
+to the command on its
+standard input (or file descriptor @var{n} if @var{n} is specified).
+
+@subsection Duplicating File Descriptors
+The redirection operator
+@example
+[@var{n}]<&@var{word}
+@end example
+@noindent
+is used to duplicate input file descriptors.
+If @var{word}
+expands to one or more digits, the file descriptor denoted by @var{n}
+is made to be a copy of that file descriptor.
+If the digits in @var{word} do not specify a file descriptor open for
+input, a redirection error occurs.
+If @var{word}
+evaluates to @samp{-}, file descriptor @var{n} is closed.
+If @var{n} is not specified, the standard input (file descriptor 0) is used.
+
+The operator
+@example
+[@var{n}]>&@var{word}
+@end example
+@noindent
+is used similarly to duplicate output file descriptors.  If
+@var{n} is not specified, the standard output (file descriptor 1) is used.
+If the digits in @var{word} do not specify a file descriptor open for
+output, a redirection error occurs.
+If @var{word}
+evaluates to @samp{-}, file descriptor @var{n} is closed.
+As a special case, if @var{n} is omitted, and @var{word} does not
+expand to one or more digits or @samp{-}, the standard output and standard
+error are redirected as described previously.
+
+@subsection Moving File Descriptors
+The redirection operator
+@example
+[@var{n}]<&@var{digit}-
+@end example
+@noindent
+moves the file descriptor @var{digit} to file descriptor @var{n},
+or the standard input (file descriptor 0) if @var{n} is not specified.
+@var{digit} is closed after being duplicated to @var{n}.
+
+Similarly, the redirection operator
+@example
+[@var{n}]>&@var{digit}-
+@end example
+@noindent
+moves the file descriptor @var{digit} to file descriptor @var{n},
+or the standard output (file descriptor 1) if @var{n} is not specified.
+
+@subsection Opening File Descriptors for Reading and Writing
+The redirection operator
+@example
+[@var{n}]<>@var{word}
+@end example
+@noindent
+causes the file whose name is the expansion of @var{word}
+to be opened for both reading and writing on file descriptor
+@var{n}, or on file descriptor 0 if @var{n}
+is not specified.  If the file does not exist, it is created.
+
+@node Executing Commands
+@section Executing Commands
+
+@menu
+* Simple Command Expansion::	How Bash expands simple commands before
+				executing them.
+* Command Search and Execution::	How Bash finds commands and runs them.
+* Command Execution Environment::	The environment in which Bash
+					executes commands that are not
+					shell builtins.
+* Environment::		The environment given to a command.
+* Exit Status::		The status returned by commands and how Bash
+			interprets it.
+* Signals::		What happens when Bash or a command it runs
+			receives a signal.
+@end menu
+
+@node Simple Command Expansion
+@subsection Simple Command Expansion
+@cindex command expansion
+
+When a simple command is executed, the shell performs the following
+expansions, assignments, and redirections, from left to right, in
+the following order.
+
+@enumerate
+@item
+The words that the parser has marked as variable assignments (those
+preceding the command name) and redirections are saved for later
+processing.
+
+@item
+The words that are not variable assignments or redirections are
+expanded (@pxref{Shell Expansions}).
+If any words remain after expansion, the first word
+is taken to be the name of the command and the remaining words are
+the arguments.
+
+@item
+Redirections are performed as described above (@pxref{Redirections}).
+
+@item
+The text after the @samp{=} in each variable assignment undergoes tilde
+expansion, parameter expansion, command substitution, arithmetic expansion,
+and quote removal before being assigned to the variable.
+@end enumerate
+
+If no command name results, the variable assignments affect the current
+shell environment.  Otherwise, the variables are added to the environment
+of the executed command and do not affect the current shell environment.
+If any of the assignments attempts to assign a value to a readonly variable,
+an error occurs, and the command exits with a non-zero status.
+
+If no command name results, redirections are performed, but do not
+affect the current shell environment.  A redirection error causes the
+command to exit with a non-zero status.
+
+If there is a command name left after expansion, execution proceeds as
+described below.  Otherwise, the command exits.  If one of the expansions
+contained a command substitution, the exit status of the command is
+the exit status of the last command substitution performed.  If there
+were no command substitutions, the command exits with a status of zero.
+
+@node Command Search and Execution
+@subsection Command Search and Execution
+@cindex command execution
+@cindex command search
+
+After a command has been split into words, if it results in a
+simple command and an optional list of arguments, the following
+actions are taken.
+
+@enumerate
+@item
+If the command name contains no slashes, the shell attempts to
+locate it.  If there exists a shell function by that name, that
+function is invoked as described in @ref{Shell Functions}.
+
+@item
+If the name does not match a function, the shell searches for
+it in the list of shell builtins.  If a match is found, that
+builtin is invoked.
+
+@item
+If the name is neither a shell function nor a builtin,
+and contains no slashes, Bash searches each element of
+@env{$PATH} for a directory containing an executable file
+by that name.  Bash uses a hash table to remember the full
+pathnames of executable files to avoid multiple @env{PATH} searches
+(see the description of @code{hash} in @ref{Bourne Shell Builtins}).
+A full search of the directories in @env{$PATH}
+is performed only if the command is not found in the hash table.
+If the search is unsuccessful, the shell searches for a defined shell
+function named @code{command_not_found_handle}.
+If that function exists, it is invoked in a separate execution environment
+with the original command and
+the original command's arguments as its arguments, and the function's
+exit status becomes the exit status of that subshell.
+If that function is not defined, the shell prints an error
+message and returns an exit status of 127.
+
+@item
+If the search is successful, or if the command name contains
+one or more slashes, the shell executes the named program in
+a separate execution environment.
+Argument 0 is set to the name given, and the remaining arguments
+to the command are set to the arguments supplied, if any.
+
+@item
+If this execution fails because the file is not in executable
+format, and the file is not a directory, it is assumed to be a
+@var{shell script} and the shell executes it as described in
+@ref{Shell Scripts}.
+
+@item
+If the command was not begun asynchronously, the shell waits for
+the command to complete and collects its exit status.
+
+@end enumerate
+
+@node Command Execution Environment
+@subsection Command Execution Environment
+@cindex execution environment
+
+The shell has an @var{execution environment}, which consists of the
+following:
+
+@itemize @bullet
+@item
+open files inherited by the shell at invocation, as modified by
+redirections supplied to the @code{exec} builtin
+
+@item
+the current working directory as set by @code{cd}, @code{pushd}, or
+@code{popd}, or inherited by the shell at invocation
+
+@item
+the file creation mode mask as set by @code{umask} or inherited from
+the shell's parent
+
+@item
+current traps set by @code{trap}
+
+@item
+shell parameters that are set by variable assignment or with @code{set}
+or inherited from the shell's parent in the environment
+
+@item
+shell functions defined during execution or inherited from the shell's
+parent in the environment
+
+@item
+options enabled at invocation (either by default or with command-line
+arguments) or by @code{set}
+
+@item
+options enabled by @code{shopt} (@pxref{The Shopt Builtin})
+
+@item
+shell aliases defined with @code{alias} (@pxref{Aliases})
+
+@item
+various process @sc{id}s, including those of background jobs
+(@pxref{Lists}), the value of @code{$$}, and the value of
+@env{$PPID}
+
+@end itemize
+
+When a simple command other than a builtin or shell function
+is to be executed, it
+is invoked in a separate execution environment that consists of
+the following.  Unless otherwise noted, the values are inherited
+from the shell.
+
+@itemize @bullet
+@item
+the shell's open files, plus any modifications and additions specified
+by redirections to the command
+
+@item
+the current working directory
+
+@item
+the file creation mode mask
+
+@item
+shell variables and functions marked for export, along with variables
+exported for the command, passed in the environment (@pxref{Environment})
+
+@item
+traps caught by the shell are reset to the values inherited from the
+shell's parent, and traps ignored by the shell are ignored
+
+@end itemize
+
+A command invoked in this separate environment cannot affect the
+shell's execution environment.
+
+Command substitution, commands grouped with parentheses,
+and asynchronous commands are invoked in a
+subshell environment that is a duplicate of the shell environment,
+except that traps caught by the shell are reset to the values
+that the shell inherited from its parent at invocation.  Builtin
+commands that are invoked as part of a pipeline are also executed
+in a subshell environment.  Changes made to the subshell environment
+cannot affect the shell's execution environment.
+
+Subshells spawned to execute command substitutions inherit the value of
+the @option{-e} option from the parent shell.  When not in @sc{posix} mode,
+Bash clears the @option{-e} option in such subshells.
+
+If a command is followed by a @samp{&} and job control is not active, the
+default standard input for the command is the empty file @file{/dev/null}.
+Otherwise, the invoked command inherits the file descriptors of the calling
+shell as modified by redirections.
+
+@node Environment
+@subsection Environment
+@cindex environment
+
+When a program is invoked it is given an array of strings
+called the @var{environment}.
+This is a list of name-value pairs, of the form @code{name=value}.
+
+Bash provides several ways to manipulate the environment.
+On invocation, the shell scans its own environment and
+creates a parameter for each name found, automatically marking
+it for @var{export}
+to child processes.  Executed commands inherit the environment.
+The @code{export} and @samp{declare -x}
+commands allow parameters and functions to be added to and
+deleted from the environment.  If the value of a parameter
+in the environment is modified, the new value becomes part
+of the environment, replacing the old.  The environment
+inherited by any executed command consists of the shell's
+initial environment, whose values may be modified in the shell,
+less any pairs removed by the @code{unset} and @samp{export -n}
+commands, plus any additions via the @code{export} and
+@samp{declare -x} commands.
+
+The environment for any simple command
+or function may be augmented temporarily by prefixing it with
+parameter assignments, as described in @ref{Shell Parameters}.
+These assignment statements affect only the environment seen
+by that command.
+
+If the @option{-k} option is set (@pxref{The Set Builtin}), then all
+parameter assignments are placed in the environment for a command,
+not just those that precede the command name.
+
+When Bash invokes an external command, the variable @samp{$_}
+is set to the full pathname of the command and passed to that
+command in its environment.
+
+@node Exit Status
+@subsection Exit Status
+@cindex exit status
+
+The exit status of an executed command is the value returned by the
+@var{waitpid} system call or equivalent function.  Exit statuses    
+fall between 0 and 255, though, as explained below, the shell may
+use values above 125 specially.  Exit statuses from shell builtins and
+compound commands are also limited to this range.  Under certain
+circumstances, the shell will use special values to indicate specific
+failure modes.
+
+For the shell's purposes, a command which exits with a
+zero exit status has succeeded.
+A non-zero exit status indicates failure.
+This seemingly counter-intuitive scheme is used so there
+is one well-defined way to indicate success and a variety of
+ways to indicate various failure modes.
+When a command terminates on a fatal signal whose number is @var{N},
+Bash uses the value 128+@var{N} as the exit status.
+
+If a command is not found, the child process created to
+execute it returns a status of 127.  If a command is found  
+but is not executable, the return status is 126.
+
+If a command fails because of an error during expansion or redirection,
+the exit status is greater than zero.
+
+The exit status is used by the Bash conditional commands
+(@pxref{Conditional Constructs}) and some of the list
+constructs (@pxref{Lists}).
+
+All of the Bash builtins return an exit status of zero if they succeed
+and a non-zero status on failure, so they may be used by the
+conditional and list constructs.
+All builtins return an exit status of 2 to indicate incorrect usage,
+generally invalid options or missing arguments.
+
+@node Signals
+@subsection Signals
+@cindex signal handling
+
+When Bash is interactive, in the absence of any traps, it ignores
+@code{SIGTERM} (so that @samp{kill 0} does not kill an interactive shell),
+and @code{SIGINT}
+is caught and handled (so that the @code{wait} builtin is interruptible).
+When Bash receives a @code{SIGINT}, it breaks out of any executing loops.
+In all cases, Bash ignores @code{SIGQUIT}.
+If job control is in effect (@pxref{Job Control}), Bash
+ignores @code{SIGTTIN}, @code{SIGTTOU}, and @code{SIGTSTP}.
+
+Non-builtin commands started by Bash have signal handlers set to the
+values inherited by the shell from its parent.
+When job control is not in effect, asynchronous commands
+ignore @code{SIGINT} and @code{SIGQUIT} in addition to these inherited
+handlers.
+Commands run as a result of
+command substitution ignore the keyboard-generated job control signals
+@code{SIGTTIN}, @code{SIGTTOU}, and @code{SIGTSTP}.
+
+The shell exits by default upon receipt of a @code{SIGHUP}.
+Before exiting, an interactive shell resends the @code{SIGHUP} to
+all jobs, running or stopped.
+Stopped jobs are sent @code{SIGCONT} to ensure that they receive
+the @code{SIGHUP}.
+To prevent the shell from sending the @code{SIGHUP} signal to a
+particular job, it should be removed
+from the jobs table with the @code{disown}
+builtin (@pxref{Job Control Builtins}) or marked
+to not receive @code{SIGHUP} using @code{disown -h}.
+
+If the  @code{huponexit} shell option has been set with @code{shopt}
+(@pxref{The Shopt Builtin}), Bash sends a @code{SIGHUP} to all jobs when
+an interactive login shell exits.
+
+If Bash is waiting for a command to complete and receives a signal
+for which a trap has been set, the trap will not be executed until
+the command completes.
+When Bash is waiting for an asynchronous
+command via the @code{wait} builtin, the reception of a signal for
+which a trap has been set will cause the @code{wait} builtin to return
+immediately with an exit status greater than 128, immediately after
+which the trap is executed.
+
+@node Shell Scripts
+@section Shell Scripts
+@cindex shell script
+
+A shell script is a text file containing shell commands.  When such
+a file is used as the first non-option argument when invoking Bash,
+and neither the @option{-c} nor @option{-s} option is supplied
+(@pxref{Invoking Bash}), 
+Bash reads and executes commands from the file, then exits.  This
+mode of operation creates a non-interactive shell.  The shell first
+searches for the file in the current directory, and looks in the
+directories in @env{$PATH} if not found there.
+
+When Bash runs
+a shell script, it sets the special parameter @code{0} to the name
+of the file, rather than the name of the shell, and the positional
+parameters are set to the remaining arguments, if any are given.
+If no additional arguments are supplied, the positional parameters
+are unset.
+
+A shell script may be made executable by using the @code{chmod} command
+to turn on the execute bit.  When Bash finds such a file while
+searching the @env{$PATH} for a command, it spawns a subshell to
+execute it.  In other words, executing
+@example
+filename @var{arguments}
+@end example
+@noindent
+is equivalent to executing
+@example
+bash filename @var{arguments}
+@end example
+
+@noindent
+if @code{filename} is an executable shell script.
+This subshell reinitializes itself, so that the effect is as if a
+new shell had been invoked to interpret the script, with the
+exception that the locations of commands remembered by the parent
+(see the description of @code{hash} in @ref{Bourne Shell Builtins})
+are retained by the child.
+
+Most versions of Unix make this a part of the operating system's command
+execution mechanism.  If the first line of a script begins with
+the two characters @samp{#!}, the remainder of the line specifies
+an interpreter for the program and, depending on the operating system, one
+or more optional arguments for that interpreter.
+Thus, you can specify Bash, @code{awk}, Perl, or some other
+interpreter and write the rest of the script file in that language.
+
+The arguments to the interpreter
+consist of one or more optional arguments following the interpreter
+name on the first line of the script file, followed by the name of
+the script file, followed by the rest of the arguments supplied to the
+script.
+The details of how the interpreter line is split into an interpreter name
+and a set of arguments vary across systems.
+Bash will perform this action on operating systems that do not handle it
+themselves.
+Note that some older versions of Unix limit the interpreter
+name and a single argument to a maximum of 32 characters, so it's not
+portable to assume that using more than one argument will work.
+
+Bash scripts often begin with @code{#! /bin/bash} (assuming that
+Bash has been installed in @file{/bin}), since this ensures that
+Bash will be used to interpret the script, even if it is executed
+under another shell. It's a common idiom to use @code{env} to find
+@code{bash} even if it's been installed in another directory:
+@code{#!/usr/bin/env bash} will find the first occurrence of @code{bash}
+in @env{$PATH}.
+
+@node Shell Builtin Commands
+@chapter Shell Builtin Commands
+
+@menu
+* Bourne Shell Builtins::	Builtin commands inherited from the Bourne
+				Shell.
+* Bash Builtins::		Table of builtins specific to Bash.
+* Modifying Shell Behavior::	Builtins to modify shell attributes and
+				optional behavior.
+* Special Builtins::		Builtin commands classified specially by
+				POSIX.
+@end menu
+
+Builtin commands are contained within the shell itself.
+When the name of a builtin command is used as the first word of
+a simple command (@pxref{Simple Commands}), the shell executes
+the command directly, without invoking another program.
+Builtin commands are necessary to implement functionality impossible
+or inconvenient to obtain with separate utilities.
+
+This section briefly describes the builtins which Bash inherits from
+the Bourne Shell, as well as the builtin commands which are unique
+to or have been extended in Bash.
+
+Several builtin commands are described in other chapters: builtin
+commands which provide the Bash interface to the job control
+facilities (@pxref{Job Control Builtins}), the directory stack
+(@pxref{Directory Stack Builtins}), the command history
+(@pxref{Bash History Builtins}), and the programmable completion
+facilities (@pxref{Programmable Completion Builtins}).
+
+Many of the builtins have been extended by @sc{posix} or Bash.
+
+Unless otherwise noted, each builtin command documented as accepting
+options preceded by @samp{-} accepts @samp{--}
+to signify the end of the options.
+The @code{:}, @code{true}, @code{false}, and @code{test}/@code{[}
+builtins do not accept options and do not treat @samp{--} specially.
+The @code{exit}, @code{logout}, @code{return},
+@code{break}, @code{continue}, @code{let},
+and @code{shift} builtins accept and process arguments beginning
+with @samp{-} without requiring @samp{--}.
+Other builtins that accept arguments but are not specified as accepting
+options interpret arguments beginning with @samp{-} as invalid options and
+require @samp{--} to prevent this interpretation.
+
+@node Bourne Shell Builtins
+@section Bourne Shell Builtins
+
+The following shell builtin commands are inherited from the Bourne Shell.
+These commands are implemented as specified by the @sc{posix} standard.
+
+@table @code
+@item :    @r{(a colon)}
+@btindex :
+@example
+: [@var{arguments}]
+@end example
+
+Do nothing beyond expanding @var{arguments} and performing redirections.
+The return status is zero.
+
+@item .    @r{(a period)}
+@btindex .
+@example
+. @var{filename} [@var{arguments}]
+@end example
+
+Read and execute commands from the @var{filename} argument in the
+current shell context.  If @var{filename} does not contain a slash,
+the @env{PATH} variable is used to find @var{filename}.
+When Bash is not in @sc{posix} mode, the current directory is searched
+if @var{filename} is not found in @env{$PATH}.
+If any @var{arguments} are supplied, they become the positional
+parameters when @var{filename} is executed.  Otherwise the positional
+parameters are unchanged.
+If the @option{-T} option is enabled, @code{source} inherits any trap on
+@code{DEBUG}; if it is not, any @code{DEBUG} trap string is saved and
+restored around the call to @code{source}, and @code{source} unsets the
+@code{DEBUG} trap while it executes.
+If @option{-T} is not set, and the sourced file changes
+the @code{DEBUG} trap, the new value is retained when @code{source} completes.
+The return status is the exit status of the last command executed, or
+zero if no commands are executed.  If @var{filename} is not found, or
+cannot be read, the return status is non-zero.
+This builtin is equivalent to @code{source}.
+
+@item break
+@btindex break
+@example
+break [@var{n}]
+@end example
+
+Exit from a @code{for}, @code{while}, @code{until}, or @code{select} loop.
+If @var{n} is supplied, the @var{n}th enclosing loop is exited.
+@var{n} must be greater than or equal to 1.
+The return status is zero unless @var{n} is not greater than or equal to 1.
+
+@item cd
+@btindex cd
+@example
+cd [-L|[-P [-e]] [-@@] [@var{directory}]
+@end example
+
+Change the current working directory to @var{directory}.
+If @var{directory} is not supplied, the value of the @env{HOME}
+shell variable is used.
+Any additional arguments following @var{directory} are ignored.
+If the shell variable
+@env{CDPATH} exists, it is used as a search path:
+each directory name in @env{CDPATH} is searched for
+@var{directory}, with alternative directory names in @env{CDPATH}
+separated by a colon (@samp{:}).
+If @var{directory} begins with a slash, @env{CDPATH} is not used.
+
+The @option{-P} option means to not follow symbolic links: symbolic links
+are resolved while @code{cd} is traversing @var{directory} and before
+processing an instance of @samp{..} in @var{directory}.
+
+By default, or when the @option{-L} option is supplied, symbolic links
+in @var{directory} are resolved after @code{cd} processes an instance
+of @samp{..} in @var{directory}.
+
+If @samp{..} appears in @var{directory}, it is processed by removing the
+immediately preceding pathname component, back to a slash or the beginning
+of @var{directory}.
+
+If the @option{-e} option is supplied with @option{-P}
+and the current working directory cannot be successfully determined
+after a successful directory change, @code{cd} will return an unsuccessful
+status.
+
+On systems that support it, the @option{-@@} option presents the extended
+attributes associated with a file as a directory.              
+
+If @var{directory} is @samp{-}, it is converted to @env{$OLDPWD}
+before the directory change is attempted.
+
+If a non-empty directory name from @env{CDPATH} is used, or if
+@samp{-} is the first argument, and the directory change is
+successful, the absolute pathname of the new working directory is
+written to the standard output.
+
+The return status is zero if the directory is successfully changed,
+non-zero otherwise.
+
+@item continue
+@btindex continue
+@example
+continue [@var{n}]
+@end example
+
+Resume the next iteration of an enclosing @code{for}, @code{while},
+@code{until}, or @code{select} loop.
+If @var{n} is supplied, the execution of the @var{n}th enclosing loop
+is resumed.
+@var{n} must be greater than or equal to 1.
+The return status is zero unless @var{n} is not greater than or equal to 1.
+
+@item eval
+@btindex eval
+@example
+eval [@var{arguments}]
+@end example
+
+The arguments are concatenated together into a single command, which is
+then read and executed, and its exit status returned as the exit status
+of @code{eval}.
+If there are no arguments or only empty arguments, the return status is
+zero.
+
+@item exec
+@btindex exec
+@example
+exec [-cl] [-a @var{name}] [@var{command} [@var{arguments}]]
+@end example
+
+If @var{command}
+is supplied, it replaces the shell without creating a new process.
+If the @option{-l} option is supplied, the shell places a dash at the
+beginning of the zeroth argument passed to @var{command}.
+This is what the @code{login} program does.
+The @option{-c} option causes @var{command} to be executed with an empty
+environment.
+If @option{-a} is supplied, the shell passes @var{name} as the zeroth
+argument to @var{command}.
+If @var{command}
+cannot be executed for some reason, a non-interactive shell exits,
+unless the @code{execfail} shell option
+is enabled.  In that case, it returns failure.
+An interactive shell returns failure if the file cannot be executed.
+A subshell exits unconditionally if @code{exec} fails.
+If no @var{command} is specified, redirections may be used to affect
+the current shell environment.  If there are no redirection errors, the
+return status is zero; otherwise the return status is non-zero.
+
+@item exit
+@btindex exit
+@example
+exit [@var{n}]
+@end example
+
+Exit the shell, returning a status of @var{n} to the shell's parent.
+If @var{n} is omitted, the exit status is that of the last command executed.
+Any trap on @code{EXIT} is executed before the shell terminates.
+
+@item export
+@btindex export
+@example
+export [-fn] [-p] [@var{name}[=@var{value}]]
+@end example
+
+Mark each @var{name} to be passed to child processes
+in the environment.  If the @option{-f} option is supplied, the @var{name}s
+refer to shell functions; otherwise the names refer to shell variables.
+The @option{-n} option means to no longer mark each @var{name} for export.
+If no @var{names} are supplied, or if the @option{-p} option is given, a
+list of names of all exported variables is displayed.
+The @option{-p} option displays output in a form that may be reused as input.
+If a variable name is followed by =@var{value}, the value of
+the variable is set to @var{value}.
+
+The return status is zero unless an invalid option is supplied, one of
+the names is not a valid shell variable name, or @option{-f} is supplied
+with a name that is not a shell function.
+
+@item getopts
+@btindex getopts
+@example
+getopts @var{optstring} @var{name} [@var{arg} @dots{}]
+@end example
+
+@code{getopts} is used by shell scripts to parse positional parameters.
+@var{optstring} contains the option characters to be recognized; if a
+character is followed by a colon, the option is expected to have an
+argument, which should be separated from it by whitespace.
+The colon (@samp{:}) and question mark (@samp{?}) may not be
+used as option characters.
+Each time it is invoked, @code{getopts}
+places the next option in the shell variable @var{name}, initializing
+@var{name} if it does not exist,
+and the index of the next argument to be processed into the
+variable @env{OPTIND}.
+@env{OPTIND} is initialized to 1 each time the shell or a shell script
+is invoked.
+When an option requires an argument,
+@code{getopts} places that argument into the variable @env{OPTARG}.
+The shell does not reset @env{OPTIND} automatically; it must be manually
+reset between multiple calls to @code{getopts} within the same shell
+invocation if a new set of parameters is to be used.
+
+When the end of options is encountered, @code{getopts} exits with a
+return value greater than zero.
+@env{OPTIND} is set to the index of the first non-option argument,
+and @var{name} is set to @samp{?}.
+
+@code{getopts}
+normally parses the positional parameters, but if more arguments are
+supplied as @var{arg} values, @code{getopts} parses those instead.
+
+@code{getopts} can report errors in two ways.  If the first character of
+@var{optstring} is a colon, @var{silent}
+error reporting is used.  In normal operation, diagnostic messages
+are printed when invalid options or missing option arguments are
+encountered.
+If the variable @env{OPTERR}
+is set to 0, no error messages will be displayed, even if the first
+character of @code{optstring} is not a colon.
+
+If an invalid option is seen,
+@code{getopts} places @samp{?} into @var{name} and, if not silent,
+prints an error message and unsets @env{OPTARG}.
+If @code{getopts} is silent, the option character found is placed in
+@env{OPTARG} and no diagnostic message is printed.
+
+If a required argument is not found, and @code{getopts}
+is not silent, a question mark (@samp{?}) is placed in @var{name},
+@code{OPTARG} is unset, and a diagnostic message is printed.
+If @code{getopts} is silent, then a colon (@samp{:}) is placed in
+@var{name} and @env{OPTARG} is set to the option character found.
+
+@item hash
+@btindex hash
+@example
+hash [-r] [-p @var{filename}] [-dt] [@var{name}]
+@end example
+
+Each time @code{hash} is invoked, it remembers the full pathnames of the
+commands specified as @var{name} arguments,
+so they need not be searched for on subsequent invocations.
+The commands are found by searching through the directories listed in
+@env{$PATH}.
+Any previously-remembered pathname is discarded.
+The @option{-p} option inhibits the path search, and @var{filename} is
+used as the location of @var{name}.
+The @option{-r} option causes the shell to forget all remembered locations.
+The @option{-d} option causes the shell to forget the remembered location
+of each @var{name}.
+If the @option{-t} option is supplied, the full pathname to which each
+@var{name} corresponds is printed.  If multiple @var{name} arguments are
+supplied with @option{-t}, the @var{name} is printed before the hashed
+full pathname.
+The @option{-l} option causes output to be displayed in a format
+that may be reused as input.
+If no arguments are given, or if only @option{-l} is supplied,
+information about remembered commands is printed.
+The return status is zero unless a @var{name} is not found or an invalid
+option is supplied.
+
+@item pwd
+@btindex pwd
+@example
+pwd [-LP]
+@end example
+
+Print the absolute pathname of the current working directory.
+If the @option{-P} option is supplied, the pathname printed will not
+contain symbolic links.
+If the @option{-L} option is supplied, the pathname printed may contain
+symbolic links.
+The return status is zero unless an error is encountered while
+determining the name of the current directory or an invalid option
+is supplied.
+
+@item readonly
+@btindex readonly
+@example
+readonly [-aAf] [-p] [@var{name}[=@var{value}]] @dots{}
+@end example
+
+Mark each @var{name} as readonly.
+The values of these names may not be changed by subsequent assignment.
+If the @option{-f} option is supplied, each @var{name} refers to a shell
+function.
+The @option{-a} option means each @var{name} refers to an indexed
+array variable; the @option{-A} option means each @var{name} refers
+to an associative array variable.
+If both options are supplied, @option{-A} takes precedence.
+If no @var{name} arguments are given, or if the @option{-p}
+option is supplied, a list of all readonly names is printed.
+The other options may be used to restrict the output to a subset of
+the set of readonly names.
+The @option{-p} option causes output to be displayed in a format that
+may be reused as input.
+If a variable name is followed by =@var{value}, the value of
+the variable is set to @var{value}.
+The return status is zero unless an invalid option is supplied, one of
+the @var{name} arguments is not a valid shell variable or function name,
+or the @option{-f} option is supplied with a name that is not a shell function.
+
+@item return
+@btindex return
+@example
+return [@var{n}]
+@end example
+
+Cause a shell function to stop executing and return the value @var{n}
+to its caller.
+If @var{n} is not supplied, the return value is the exit status of the
+last command executed in the function.
+If @code{return} is executed by a trap handler, the last command used to
+determine the status is the last command executed before the trap handler.
+If @code{return} is executed during a @code{DEBUG} trap, the last command
+used to determine the status is the last command executed by the trap
+handler before @code{return} was invoked.
+@code{return} may also be used to terminate execution of a script
+being executed with the @code{.} (@code{source}) builtin,
+returning either @var{n} or
+the exit status of the last command executed within the script as the exit
+status of the script.
+If @var{n} is supplied, the return value is its least significant
+8 bits.
+Any command associated with the @code{RETURN} trap is executed
+before execution resumes after the function or script.
+The return status is non-zero if @code{return} is supplied a non-numeric
+argument or is used outside a function
+and not during the execution of a script by @code{.} or @code{source}.
+
+@item shift
+@btindex shift
+@example
+shift [@var{n}]
+@end example
+
+Shift the positional parameters to the left by @var{n}.
+The positional parameters from @var{n}+1 @dots{} @code{$#} are
+renamed to @code{$1} @dots{} @code{$#}-@var{n}.
+Parameters represented by the numbers @code{$#} down to @code{$#}-@var{n}+1
+are unset.
+@var{n} must be a non-negative number less than or equal to @code{$#}.
+If @var{n} is zero or greater than @code{$#}, the positional parameters
+are not changed.
+If @var{n} is not supplied, it is assumed to be 1.
+The return status is zero unless @var{n} is greater than @code{$#} or
+less than zero, non-zero otherwise.
+
+@item test
+@itemx [
+@btindex test
+@btindex [
+@example
+test @var{expr}
+@end example
+
+Evaluate a conditional expression @var{expr} and return a status of 0
+(true) or 1 (false).
+Each operator and operand must be a separate argument.
+Expressions are composed of the primaries described below in
+@ref{Bash Conditional Expressions}.
+@code{test} does not accept any options, nor does it accept and ignore
+an argument of @option{--} as signifying the end of options.
+
+When the @code{[} form is used, the last argument to the command must
+be a @code{]}.
+
+Expressions may be combined using the following operators, listed in
+decreasing order of precedence.
+The evaluation depends on the number of arguments; see below.
+Operator precedence is used when there are five or more arguments.
+
+@table @code
+@item ! @var{expr}
+True if @var{expr} is false.
+
+@item ( @var{expr} )
+Returns the value of @var{expr}.
+This may be used to override the normal precedence of operators.
+
+@item @var{expr1} -a @var{expr2}
+True if both @var{expr1} and @var{expr2} are true.
+
+@item @var{expr1} -o @var{expr2}
+True if either @var{expr1} or @var{expr2} is true.
+@end table
+
+The @code{test} and @code{[} builtins evaluate conditional
+expressions using a set of rules based on the number of arguments.
+
+@table @asis
+@item 0 arguments
+The expression is false.
+
+@item 1 argument
+The expression is true if, and only if, the argument is not null.
+
+@item 2 arguments
+If the first argument is @samp{!}, the expression is true if and
+only if the second argument is null.
+If the first argument is one of the unary conditional operators
+(@pxref{Bash Conditional Expressions}), the expression
+is true if the unary test is true.
+If the first argument is not a valid unary operator, the expression is
+false.
+
+@item 3 arguments
+The following conditions are applied in the order listed.
+
+@enumerate
+@item
+If the second argument is one of the binary conditional
+operators (@pxref{Bash Conditional Expressions}), the
+result of the expression is the result of the binary test using the
+first and third arguments as operands.
+The @samp{-a} and @samp{-o} operators are considered binary operators
+when there are three arguments.
+@item
+If the first argument is @samp{!}, the value is the negation of
+the two-argument test using the second and third arguments.
+@item
+If the first argument is exactly @samp{(} and the third argument is
+exactly @samp{)}, the result is the one-argument test of the second
+argument.
+@item
+Otherwise, the expression is false.
+@end enumerate
+
+@item 4 arguments
+If the first argument is @samp{!}, the result is the negation of
+the three-argument expression composed of the remaining arguments.
+Otherwise, the expression is parsed and evaluated according to
+precedence using the rules listed above.
+
+@item 5 or more arguments
+The expression is parsed and evaluated according to precedence
+using the rules listed above.
+@end table
+
+When used with @code{test} or @samp{[}, the @samp{<} and @samp{>}
+operators sort lexicographically using ASCII ordering.
+
+@item times
+@btindex times
+@example
+times
+@end example
+
+Print out the user and system times used by the shell and its children.
+The return status is zero.
+
+@item trap
+@btindex trap
+@example
+trap [-lp] [@var{arg}] [@var{sigspec} @dots{}]
+@end example
+
+The commands in @var{arg} are to be read and executed when the
+shell receives signal @var{sigspec}.  If @var{arg} is absent (and
+there is a single @var{sigspec}) or
+equal to @samp{-}, each specified signal's disposition is reset
+to the value it had when the shell was started.
+If @var{arg} is the null string, then the signal specified by
+each @var{sigspec} is ignored by the shell and commands it invokes.
+If @var{arg} is not present and @option{-p} has been supplied,
+the shell displays the trap commands associated with each @var{sigspec}.
+If no arguments are supplied, or
+only @option{-p} is given, @code{trap} prints the list of commands
+associated with each signal number in a form that may be reused as
+shell input.
+The @option{-l} option causes the shell to print a list of signal names
+and their corresponding numbers.
+Each @var{sigspec} is either a signal name or a signal number.
+Signal names are case insensitive and the @code{SIG} prefix is optional.
+
+If a @var{sigspec}
+is @code{0} or @code{EXIT}, @var{arg} is executed when the shell exits.
+If a @var{sigspec} is @code{DEBUG}, the command @var{arg} is executed
+before every simple command, @code{for} command, @code{case} command,
+@code{select} command, every arithmetic @code{for} command, and before
+the first command executes in a shell function.
+Refer to the description of the @code{extdebug} option to the
+@code{shopt} builtin (@pxref{The Shopt Builtin}) for details of its
+effect on the @code{DEBUG} trap.
+If a @var{sigspec} is @code{RETURN}, the command @var{arg} is executed
+each time a shell function or a script executed with the @code{.} or
+@code{source} builtins finishes executing.
+
+If a @var{sigspec} is @code{ERR}, the command @var{arg} 
+is executed whenever
+a pipeline (which may consist of a single simple
+command), a list, or a compound command returns a
+non-zero exit status,
+subject to the following conditions.
+The @code{ERR} trap is not executed if the failed command is part of the
+command list immediately following an @code{until} or @code{while} keyword,
+part of the test following the @code{if} or @code{elif} reserved words,
+part of a command executed in a @code{&&} or @code{||} list
+except the command following the final @code{&&} or @code{||},
+any command in a pipeline but the last,
+or if the command's return
+status is being inverted using @code{!}.
+These are the same conditions obeyed by the @code{errexit} (@option{-e})
+option.
+
+Signals ignored upon entry to the shell cannot be trapped or reset.
+Trapped signals that are not being ignored are reset to their original
+values in a subshell or subshell environment when one is created.
+
+The return status is zero unless a @var{sigspec} does not specify a
+valid signal.
+
+@item umask
+@btindex umask
+@example
+umask [-p] [-S] [@var{mode}]
+@end example
+
+Set the shell process's file creation mask to @var{mode}.  If
+@var{mode} begins with a digit, it is interpreted as an octal number;
+if not, it is interpreted as a symbolic mode mask similar
+to that accepted by the @code{chmod} command.  If @var{mode} is
+omitted, the current value of the mask is printed.  If the @option{-S}
+option is supplied without a @var{mode} argument, the mask is printed
+in a symbolic format.
+If the  @option{-p} option is supplied, and @var{mode}
+is omitted, the output is in a form that may be reused as input.
+The return status is zero if the mode is successfully changed or if
+no @var{mode} argument is supplied, and non-zero otherwise.
+
+Note that when the mode is interpreted as an octal number, each number
+of the umask is subtracted from @code{7}.  Thus, a umask of @code{022}
+results in permissions of @code{755}.
+
+@item unset
+@btindex unset
+@example
+unset [-fnv] [@var{name}]
+@end example
+
+Remove each variable or function @var{name}.
+If the @option{-v} option is given, each
+@var{name} refers to a shell variable and that variable is removed.
+If the @option{-f} option is given, the @var{name}s refer to shell
+functions, and the function definition is removed.
+If the @option{-n} option is supplied, and @var{name} is a variable with
+the @var{nameref} attribute, @var{name} will be unset rather than the
+variable it references.
+@option{-n} has no effect if the @option{-f} option is supplied.
+If no options are supplied, each @var{name} refers to a variable; if
+there is no variable by that name, a function with that name, if any, is
+unset.
+Readonly variables and functions may not be unset.
+Some shell variables lose their special behavior if they are unset; such
+behavior is noted in the description of the individual variables.
+The return status is zero unless a @var{name} is readonly.
+@end table
+
+@node Bash Builtins
+@section Bash Builtin Commands
+
+This section describes builtin commands which are unique to
+or have been extended in Bash.
+Some of these commands are specified in the @sc{posix} standard.
+
+@table @code
+
+@item alias
+@btindex alias
+@example
+alias [-p] [@var{name}[=@var{value}] @dots{}]
+@end example
+
+Without arguments or with the @option{-p} option, @code{alias} prints
+the list of aliases on the standard output in a form that allows
+them to be reused as input.
+If arguments are supplied, an alias is defined for each @var{name}
+whose @var{value} is given.  If no @var{value} is given, the name
+and value of the alias is printed.
+Aliases are described in @ref{Aliases}.
+
+@item bind
+@btindex bind
+@example
+bind [-m @var{keymap}] [-lpsvPSVX]
+bind [-m @var{keymap}] [-q @var{function}] [-u @var{function}] [-r @var{keyseq}]
+bind [-m @var{keymap}] -f @var{filename}
+bind [-m @var{keymap}] -x @var{keyseq:shell-command}
+bind [-m @var{keymap}] @var{keyseq:function-name}
+bind [-m @var{keymap}] @var{keyseq:readline-command}
+@end example
+
+Display current Readline (@pxref{Command Line Editing})
+key and function bindings,
+bind a key sequence to a Readline function or macro,
+or set a Readline variable.
+Each non-option argument is a command as it would appear in a
+Readline initialization file (@pxref{Readline Init File}),
+but each binding or command must be passed as a separate argument;  e.g.,
+@samp{"\C-x\C-r":re-read-init-file}.
+
+Options, if supplied, have the following meanings:
+
+@table @code
+@item -m @var{keymap}
+Use @var{keymap} as the keymap to be affected by
+the subsequent bindings.  Acceptable @var{keymap}
+names are
+@code{emacs},
+@code{emacs-standard},
+@code{emacs-meta},
+@code{emacs-ctlx},
+@code{vi},
+@code{vi-move},
+@code{vi-command}, and
+@code{vi-insert}.
+@code{vi} is equivalent to @code{vi-command} (@code{vi-move} is also a
+synonym); @code{emacs} is equivalent to @code{emacs-standard}.
+
+@item -l
+List the names of all Readline functions.
+
+@item -p
+Display Readline function names and bindings in such a way that they
+can be used as input or in a Readline initialization file.
+
+@item -P
+List current Readline function names and bindings.
+
+@item -v
+Display Readline variable names and values in such a way that they
+can be used as input or in a Readline initialization file.
+
+@item -V
+List current Readline variable names and values.
+
+@item -s
+Display Readline key sequences bound to macros and the strings they output
+in such a way that they can be used as input or in a Readline
+initialization file.
+
+@item -S
+Display Readline key sequences bound to macros and the strings they output.
+
+@item -f @var{filename}
+Read key bindings from @var{filename}.
+
+@item -q @var{function}
+Query about which keys invoke the named @var{function}.
+
+@item -u @var{function}
+Unbind all keys bound to the named @var{function}.
+
+@item -r @var{keyseq}
+Remove any current binding for @var{keyseq}.
+
+@item -x @var{keyseq:shell-command}
+Cause @var{shell-command} to be executed whenever @var{keyseq} is
+entered.
+When @var{shell-command} is executed, the shell sets the
+@code{READLINE_LINE} variable to the contents of the Readline line
+buffer and the @code{READLINE_POINT} and @code{READLINE_MARK} variables
+to the current location of the insertion point and the saved insertion
+point (the @var{mark}), respectively.
+If the executed command changes the value of any of @code{READLINE_LINE},
+@code{READLINE_POINT}, or @code{READLINE_MARK}, those new values will be
+reflected in the editing state.
+
+@item -X
+List all key sequences bound to shell commands and the associated commands
+in a format that can be reused as input.
+@end table
+
+@noindent
+The return status is zero unless an invalid option is supplied or an
+error occurs.
+
+@item builtin
+@btindex builtin
+@example
+builtin [@var{shell-builtin} [@var{args}]]
+@end example
+
+Run a shell builtin, passing it @var{args}, and return its exit status.
+This is useful when defining a shell function with the same
+name as a shell builtin, retaining the functionality of the builtin within
+the function.
+The return status is non-zero if @var{shell-builtin} is not a shell
+builtin command.
+
+@item caller
+@btindex caller
+@example
+caller [@var{expr}]
+@end example
+
+Returns the context of any active subroutine call (a shell function or
+a script executed with the @code{.} or @code{source} builtins).
+
+Without @var{expr}, @code{caller} displays the line number and source
+filename of the current subroutine call.
+If a non-negative integer is supplied as @var{expr}, @code{caller}
+displays the line number, subroutine name, and source file corresponding
+to that position in the current execution call stack.  This extra
+information may be used, for example, to print a stack trace.  The
+current frame is frame 0.
+
+The return value is 0 unless the shell is not executing a subroutine
+call or @var{expr} does not correspond to a valid position in the
+call stack.
+
+@item command
+@btindex command
+@example
+command [-pVv] @var{command} [@var{arguments} @dots{}]
+@end example
+
+Runs @var{command} with @var{arguments} ignoring any shell function
+named @var{command}.
+Only shell builtin commands or commands found by searching the
+@env{PATH} are executed.
+If there is a shell function named @code{ls}, running @samp{command ls}
+within the function will execute the external command @code{ls}
+instead of calling the function recursively.
+The @option{-p} option means to use a default value for @env{PATH}
+that is guaranteed to find all of the standard utilities.
+The return status in this case is 127 if @var{command} cannot be
+found or an error occurred, and the exit status of @var{command}
+otherwise.
+
+If either the @option{-V} or @option{-v} option is supplied, a
+description of @var{command} is printed.  The @option{-v} option
+causes a single word indicating the command or file name used to
+invoke @var{command} to be displayed; the @option{-V} option produces
+a more verbose description.  In this case, the return status is
+zero if @var{command} is found, and non-zero if not.
+
+@item declare
+@btindex declare
+@example
+declare [-aAfFgiIlnrtux] [-p] [@var{name}[=@var{value}] @dots{}]
+@end example
+
+Declare variables and give them attributes.  If no @var{name}s
+are given, then display the values of variables instead. 
+
+The @option{-p} option will display the attributes and values of each
+@var{name}.
+When @option{-p} is used with @var{name} arguments, additional options,
+other than @option{-f} and @option{-F}, are ignored.
+
+When @option{-p} is supplied without @var{name} arguments, @code{declare}
+will display the attributes and values of all variables having the
+attributes specified by the additional options.
+If no other options are supplied with @option{-p}, @code{declare} will
+display the attributes and values of all shell variables.  The @option{-f}
+option will restrict the display to shell functions.
+
+The @option{-F} option inhibits the display of function definitions;
+only the function name and attributes are printed.
+If the @code{extdebug} shell option is enabled using @code{shopt}
+(@pxref{The Shopt Builtin}), the source file name and line number where
+each @var{name} is defined are displayed as well.
+@option{-F} implies @option{-f}.
+
+The @option{-g} option forces variables to be created or modified at
+the global scope, even when @code{declare} is executed in a shell function.
+It is ignored in all other cases.
+
+The @option{-I} option causes local variables to inherit the attributes
+(except the @var{nameref} attribute)
+and value of any existing variable with the same
+@var{name} at a surrounding scope.
+If there is no existing variable, the local variable is initially unset.
+
+The following options can be used to restrict output to variables with
+the specified attributes or to give variables attributes:
+
+@table @code
+@item -a
+Each @var{name} is an indexed array variable (@pxref{Arrays}).
+
+@item -A
+Each @var{name} is an associative array variable (@pxref{Arrays}).
+
+@item -f
+Use function names only.
+
+@item -i
+The variable is to be treated as
+an integer; arithmetic evaluation (@pxref{Shell Arithmetic}) is
+performed when the variable is assigned a value.
+
+@item -l
+When the variable is assigned a value, all upper-case characters are
+converted to lower-case.
+The upper-case attribute is disabled.
+
+@item -n
+Give each @var{name} the @var{nameref} attribute, making
+it a name reference to another variable.
+That other variable is defined by the value of @var{name}.
+All references, assignments, and attribute modifications
+to @var{name}, except for those using or changing the
+@option{-n} attribute itself, are performed on the variable referenced by
+@var{name}'s value.
+The nameref attribute cannot be applied to array variables.
+
+@item -r
+Make @var{name}s readonly.  These names cannot then be assigned values
+by subsequent assignment statements or unset.
+
+@item -t
+Give each @var{name} the @code{trace} attribute.
+Traced functions inherit the @code{DEBUG} and @code{RETURN} traps from
+the calling shell.
+The trace attribute has no special meaning for variables.
+
+@item -u
+When the variable is assigned a value, all lower-case characters are
+converted to upper-case.
+The lower-case attribute is disabled.
+
+@item -x
+Mark each @var{name} for export to subsequent commands via
+the environment.
+@end table
+
+Using @samp{+} instead of @samp{-} turns off the attribute instead,
+with the exceptions that @samp{+a} and @samp{+A}
+may not be used to destroy array variables and @samp{+r} will not
+remove the readonly attribute.
+When used in a function, @code{declare} makes each @var{name} local,
+as with the @code{local} command, unless the @option{-g} option is used.
+If a variable name is followed by =@var{value}, the value of the variable
+is set to @var{value}.
+
+When using @option{-a} or @option{-A} and the compound assignment syntax to 
+create array variables, additional attributes do not take effect until
+subsequent assignments.
+
+The return status is zero unless an invalid option is encountered,
+an attempt is made to define a function using @samp{-f foo=bar},
+an attempt is made to assign a value to a readonly variable,
+an attempt is made to assign a value to an array variable without
+using the compound assignment syntax (@pxref{Arrays}),
+one of the @var{names} is not a valid shell variable name,
+an attempt is made to turn off readonly status for a readonly variable,
+an attempt is made to turn off array status for an array variable,
+or an attempt is made to display a non-existent function with @option{-f}.
+
+@item echo
+@btindex echo
+@example
+echo [-neE] [@var{arg} @dots{}]
+@end example
+
+Output the @var{arg}s, separated by spaces, terminated with a
+newline.
+The return status is 0 unless a write error occurs.
+If @option{-n} is specified, the trailing newline is suppressed.
+If the @option{-e} option is given, interpretation of the following
+backslash-escaped characters is enabled.
+The @option{-E} option disables the interpretation of these escape characters,
+even on systems where they are interpreted by default.
+The @code{xpg_echo} shell option may be used to
+dynamically determine whether or not @code{echo} expands these
+escape characters by default.
+@code{echo} does not interpret @option{--} to mean the end of options.
+
+@code{echo} interprets the following escape sequences:
+@table @code
+@item \a
+alert (bell)
+@item \b
+backspace
+@item \c
+suppress further output
+@item \e
+@itemx \E
+escape
+@item \f
+form feed
+@item \n
+new line
+@item \r
+carriage return
+@item \t 
+horizontal tab
+@item \v
+vertical tab
+@item \\
+backslash
+@item \0@var{nnn}
+the eight-bit character whose value is the octal value @var{nnn}
+(zero to three octal digits)
+@item \x@var{HH}
+the eight-bit character whose value is the hexadecimal value @var{HH}
+(one or two hex digits)
+@item \u@var{HHHH}
+the Unicode (ISO/IEC 10646) character whose value is the hexadecimal value
+@var{HHHH} (one to four hex digits)
+@item \U@var{HHHHHHHH}
+the Unicode (ISO/IEC 10646) character whose value is the hexadecimal value
+@var{HHHHHHHH} (one to eight hex digits)
+@end table
+
+@item enable
+@btindex enable
+@example
+enable [-a] [-dnps] [-f @var{filename}] [@var{name} @dots{}]
+@end example
+
+Enable and disable builtin shell commands.
+Disabling a builtin allows a disk command which has the same name
+as a shell builtin to be executed without specifying a full pathname,
+even though the shell normally searches for builtins before disk commands.
+If @option{-n} is used, the @var{name}s become disabled.  Otherwise
+@var{name}s are enabled.  For example, to use the @code{test} binary
+found via @env{$PATH} instead of the shell builtin version, type
+@samp{enable -n test}.
+
+If the @option{-p} option is supplied, or no @var{name} arguments appear,
+a list of shell builtins is printed.  With no other arguments, the list
+consists of all enabled shell builtins.
+The @option{-a} option means to list
+each builtin with an indication of whether or not it is enabled. 
+
+The @option{-f} option means to load the new builtin command @var{name}
+from shared object @var{filename}, on systems that support dynamic loading.
+The @option{-d} option will delete a builtin loaded with @option{-f}.
+
+If there are no options, a list of the shell builtins is displayed.
+The @option{-s} option restricts @code{enable} to the @sc{posix} special
+builtins.  If @option{-s} is used with @option{-f}, the new builtin becomes
+a special builtin (@pxref{Special Builtins}).
+
+The return status is zero unless a @var{name} is not a shell builtin
+or there is an error loading a new builtin from a shared object.
+
+@item help
+@btindex help
+@example
+help [-dms] [@var{pattern}]
+@end example
+
+Display helpful information about builtin commands.
+If @var{pattern} is specified, @code{help} gives detailed help
+on all commands matching @var{pattern}, otherwise a list of
+the builtins is printed.
+
+Options, if supplied, have the following meanings:
+
+@table @code
+@item -d
+Display a short description of each @var{pattern}
+@item -m
+Display the description of each @var{pattern} in a manpage-like format
+@item -s
+Display only a short usage synopsis for each @var{pattern}
+@end table
+
+The return status is zero unless no command matches @var{pattern}.
+
+@item let
+@btindex let
+@example
+let @var{expression} [@var{expression} @dots{}]
+@end example
+
+The @code{let} builtin allows arithmetic to be performed on shell
+variables.  Each @var{expression} is evaluated according to the
+rules given below in @ref{Shell Arithmetic}.  If the
+last @var{expression} evaluates to 0, @code{let} returns 1;
+otherwise 0 is returned.
+
+@item local
+@btindex local
+@example
+local [@var{option}] @var{name}[=@var{value}] @dots{}
+@end example
+
+For each argument, a local variable named @var{name} is created,
+and assigned @var{value}.
+The @var{option} can be any of the options accepted by @code{declare}.
+@code{local} can only be used within a function; it makes the variable
+@var{name} have a visible scope restricted to that function and its
+children.
+If @var{name} is @samp{-}, the set of shell options is made local to the
+function in which @code{local} is invoked: shell options changed using
+the @code{set} builtin inside the function are restored to their original
+values when the function returns.
+The restore is effected as if a series of @code{set} commands were executed
+to restore the values that were in place before the function.
+The return status is zero unless @code{local} is used outside
+a function, an invalid @var{name} is supplied, or @var{name} is a
+readonly variable.
+
+@item logout
+@btindex logout
+@example
+logout [@var{n}]
+@end example
+
+Exit a login shell, returning a status of @var{n} to the shell's
+parent.
+
+@item mapfile
+@btindex mapfile
+@example
+mapfile [-d @var{delim}] [-n @var{count}] [-O @var{origin}] [-s @var{count}]
+    [-t] [-u @var{fd}] [-C @var{callback}] [-c @var{quantum}] [@var{array}]
+@end example
+
+Read lines from the standard input into the indexed array variable @var{array},
+or from file descriptor @var{fd}
+if the @option{-u} option is supplied.
+The variable @code{MAPFILE} is the default @var{array}.
+Options, if supplied, have the following meanings:
+
+@table @code
+
+@item -d
+The first character of @var{delim} is used to terminate each input line,
+rather than newline.
+If @var{delim} is the empty string, @code{mapfile} will terminate a line
+when it reads a NUL character.
+@item -n
+Copy at most @var{count} lines.  If @var{count} is 0, all lines are copied.
+@item -O
+Begin assigning to @var{array} at index @var{origin}.
+The default index is 0.
+@item -s
+Discard the first @var{count} lines read.
+@item -t
+Remove a trailing @var{delim} (default newline) from each line read.
+@item -u
+Read lines from file descriptor @var{fd} instead of the standard input.
+@item -C
+Evaluate @var{callback} each time @var{quantum} lines are read.
+The @option{-c} option specifies @var{quantum}.
+@item -c
+Specify the number of lines read between each call to @var{callback}.
+@end table
+
+If @option{-C} is specified without @option{-c},
+the default quantum is 5000.
+When @var{callback}  is evaluated, it is supplied the index of the next
+array element to be assigned and the line to be assigned to that element
+as additional arguments.
+@var{callback} is evaluated after the line is read but before the
+array element is assigned.
+
+If not supplied with an explicit origin, @code{mapfile} will clear @var{array}
+before assigning to it.
+
+@code{mapfile} returns successfully unless an invalid option or option
+argument is supplied, @var{array} is invalid or unassignable, or @var{array}
+is not an indexed array.
+
+@item printf
+@btindex printf
+@example
+printf [-v @var{var}] @var{format} [@var{arguments}]
+@end example
+
+Write the formatted @var{arguments} to the standard output under the
+control of the @var{format}.
+The @option{-v} option causes the output to be assigned to the variable
+@var{var} rather than being printed to the standard output.
+
+The @var{format} is a character string which contains three types of objects:
+plain characters, which are simply copied to standard output, character
+escape sequences, which are converted and copied to the standard output, and
+format specifications, each of which causes printing of the next successive
+@var{argument}.
+In addition to the standard @code{printf(1)} formats, @code{printf}
+interprets the following extensions:
+
+@table @code
+@item %b
+Causes @code{printf} to expand backslash escape sequences in the
+corresponding @var{argument} in the same way as @code{echo -e}
+(@pxref{Bash Builtins}).
+@item %q
+Causes @code{printf} to output the
+corresponding @var{argument} in a format that can be reused as shell input.
+@item %(@var{datefmt})T
+Causes @code{printf} to output the date-time string resulting from using
+@var{datefmt} as a format string for @code{strftime}(3).
+The corresponding @var{argument} is an integer representing the number of
+seconds since the epoch.
+Two special argument values may be used: -1 represents the current
+time, and -2 represents the time the shell was invoked.
+If no argument is specified, conversion behaves as if -1 had been given.
+This is an exception to the usual @code{printf} behavior.
+@end table
+
+@noindent
+The %b, %q, and %T directives all use the field width and precision
+arguments from the format specification and write that many bytes from    
+(or use that wide a field for) the expanded argument, which usually
+contains more characters than the original.
+
+Arguments to non-string format specifiers are treated as C language constants,
+except that a leading plus or minus sign is allowed, and if the leading
+character is a single or double quote, the value is the ASCII value of
+the following character.
+
+The @var{format} is reused as necessary to consume all of the @var{arguments}.
+If the @var{format} requires more @var{arguments} than are supplied, the
+extra format specifications behave as if a zero value or null string, as
+appropriate, had been supplied.  The return value is zero on success,
+non-zero on failure.
+
+@item read
+@btindex read
+@example
+read [-ers] [-a @var{aname}] [-d @var{delim}] [-i @var{text}] [-n @var{nchars}]
+    [-N @var{nchars}] [-p @var{prompt}] [-t @var{timeout}] [-u @var{fd}] [@var{name} @dots{}]
+@end example
+
+One line is read from the standard input, or from the file descriptor
+@var{fd} supplied as an argument to the @option{-u} option,
+split into words as described above in @ref{Word Splitting},
+and the first word
+is assigned to the first @var{name}, the second word to the second @var{name},
+and so on.
+If there are more words than names,
+the remaining words and their intervening delimiters are assigned
+to the last @var{name}.
+If there are fewer words read from the input stream than names,
+the remaining names are assigned empty values.
+The characters in the value of the @env{IFS} variable
+are used to split the line into words using the same rules the shell
+uses for expansion (described above in @ref{Word Splitting}).
+The backslash character @samp{\} may be used to remove any special
+meaning for the next character read and for line continuation.
+
+Options, if supplied, have the following meanings:
+
+@table @code
+@item -a @var{aname}
+The words are assigned to sequential indices of the array variable
+@var{aname}, starting at 0.
+All elements are removed from @var{aname} before the assignment.
+Other @var{name} arguments are ignored.
+
+@item -d @var{delim}
+The first character of @var{delim} is used to terminate the input line,
+rather than newline.
+If @var{delim} is the empty string, @code{read} will terminate a line
+when it reads a NUL character.
+
+@item -e
+Readline (@pxref{Command Line Editing}) is used to obtain the line.
+Readline uses the current (or default, if line editing was not previously
+active) editing settings, but uses Readline's default filename completion.
+
+@item -i @var{text}
+If Readline is being used to read the line, @var{text} is placed into
+the editing buffer before editing begins.
+
+@item -n @var{nchars}
+@code{read} returns after reading @var{nchars} characters rather than
+waiting for a complete line of input, but honors a delimiter if fewer
+than @var{nchars} characters are read before the delimiter.
+
+@item -N @var{nchars}
+@code{read} returns after reading exactly @var{nchars} characters rather
+than waiting for a complete line of input, unless EOF is encountered or
+@code{read} times out.
+Delimiter characters encountered in the input are
+not treated specially and do not cause @code{read} to return until
+@var{nchars} characters are read.
+The result is not split on the characters in @code{IFS}; the intent is
+that the variable is assigned exactly the characters read
+(with the exception of backslash; see the @option{-r} option below).
+
+@item -p @var{prompt}
+Display @var{prompt}, without a trailing newline, before attempting
+to read any input.
+The prompt is displayed only if input is coming from a terminal.
+
+@item -r
+If this option is given, backslash does not act as an escape character.
+The backslash is considered to be part of the line.
+In particular, a backslash-newline pair may not then be used as a line
+continuation.
+
+@item -s
+Silent mode.  If input is coming from a terminal, characters are
+not echoed.
+
+@item -t @var{timeout}
+Cause @code{read} to time out and return failure if a complete line of
+input (or a specified number of characters)
+is not read within @var{timeout} seconds.
+@var{timeout}  may be a decimal number with a fractional portion following
+the decimal point.
+This option is only effective if @code{read} is reading input from a
+terminal, pipe, or other special file; it has no effect when reading
+from regular files.
+If @code{read} times out, @code{read} saves any partial input read into
+the specified variable @var{name}.
+If @var{timeout} is 0, @code{read} returns immediately, without trying to
+read any data.  The exit status is 0 if input is available on
+the specified file descriptor, non-zero otherwise.
+The exit status is greater than 128 if the timeout is exceeded.
+
+@item -u @var{fd}
+Read input from file descriptor @var{fd}.
+@end table
+
+If no @var{name}s are supplied, the line read,
+without the ending delimiter but otherwise unmodified,
+is assigned to the
+variable @env{REPLY}.
+The exit status is zero, unless end-of-file is encountered, @code{read}
+times out (in which case the status is greater than 128),
+a variable assignment error (such as assigning to a readonly variable) occurs,
+or an invalid file descriptor is supplied as the argument to @option{-u}.
+
+@item readarray
+@btindex readarray
+@example
+readarray [-d @var{delim}] [-n @var{count}] [-O @var{origin}] [-s @var{count}]
+    [-t] [-u @var{fd}] [-C @var{callback}] [-c @var{quantum}] [@var{array}]
+@end example
+
+Read lines from the standard input into the indexed array variable @var{array},
+or from file descriptor @var{fd}
+if the @option{-u} option is supplied.
+
+A synonym for @code{mapfile}.
+
+@item source
+@btindex source
+@example
+source @var{filename}
+@end example
+
+A synonym for @code{.} (@pxref{Bourne Shell Builtins}).
+
+@item type
+@btindex type
+@example
+type [-afptP] [@var{name} @dots{}]
+@end example
+
+For each @var{name}, indicate how it would be interpreted if used as a
+command name.
+
+If the @option{-t} option is used, @code{type} prints a single word
+which is one of @samp{alias}, @samp{function}, @samp{builtin},
+@samp{file} or @samp{keyword},
+if @var{name} is an alias, shell function, shell builtin,
+disk file, or shell reserved word, respectively.
+If the @var{name} is not found, then nothing is printed, and
+@code{type} returns a failure status.
+
+If the @option{-p} option is used, @code{type} either returns the name
+of the disk file that would be executed, or nothing if @option{-t}
+would not return @samp{file}.
+
+The @option{-P} option forces a path search for each @var{name}, even if
+@option{-t} would not return @samp{file}.
+
+If a command is hashed, @option{-p} and @option{-P} print the hashed value,
+which is not necessarily the file that appears first in @code{$PATH}.
+
+If the @option{-a} option is used, @code{type} returns all of the places
+that contain an executable named @var{file}.
+This includes aliases and functions, if and only if the @option{-p} option
+is not also used.
+
+If the @option{-f} option is used, @code{type} does not attempt to find
+shell functions, as with the @code{command} builtin.
+
+The return status is zero if all of the @var{names} are found, non-zero
+if any are not found.
+
+@item typeset
+@btindex typeset
+@example
+typeset [-afFgrxilnrtux] [-p] [@var{name}[=@var{value}] @dots{}]
+@end example
+
+The @code{typeset} command is supplied for compatibility with the Korn
+shell.
+It is a synonym for the @code{declare} builtin command.
+
+@item ulimit
+@btindex ulimit
+@example
+ulimit [-HS] -a
+ulimit [-HS] [-bcdefiklmnpqrstuvxPRT] [@var{limit}]
+@end example
+
+@code{ulimit} provides control over the resources available to processes
+started by the shell, on systems that allow such control.  If an
+option is given, it is interpreted as follows:
+
+@table @code
+@item -S
+Change and report the soft limit associated with a resource.
+
+@item -H
+Change and report the hard limit associated with a resource.
+
+@item -a
+All current limits are reported; no limits are set.
+
+@item -b
+The maximum socket buffer size.
+
+@item -c
+The maximum size of core files created.
+
+@item -d
+The maximum size of a process's data segment.
+
+@item -e
+The maximum scheduling priority ("nice").
+
+@item -f
+The maximum size of files written by the shell and its children.
+
+@item -i
+The maximum number of pending signals.
+
+@item -k
+The maximum number of kqueues that may be allocated.
+
+@item -l
+The maximum size that may be locked into memory.
+
+@item -m
+The maximum resident set size (many systems do not honor this limit).
+
+@item -n
+The maximum number of open file descriptors (most systems do not
+allow this value to be set).
+
+@item -p
+The pipe buffer size.
+
+@item -q
+The maximum number of bytes in @sc{posix} message queues.
+
+@item -r
+The maximum real-time scheduling priority.
+
+@item -s
+The maximum stack size.
+
+@item -t
+The maximum amount of cpu time in seconds.
+
+@item -u
+The maximum number of processes available to a single user.
+
+@item -v
+The maximum amount of virtual memory available to the shell, and, on
+some systems, to its children.
+
+@item -x
+The maximum number of file locks.
+
+@item -P
+The maximum number of pseudoterminals.
+
+@item -R
+The maximum time a real-time process can run before blocking, in microseconds.
+
+@item -T
+The maximum number of threads.
+@end table
+
+If @var{limit} is given, and the @option{-a} option is not used,
+@var{limit} is the new value of the specified resource.
+The special @var{limit} values @code{hard}, @code{soft}, and
+@code{unlimited} stand for the current hard limit, the current soft limit,
+and no limit, respectively.
+A hard limit cannot be increased by a non-root user once it is set;
+a soft limit may be increased up to the value of the hard limit.
+Otherwise, the current value of the soft limit for the specified resource
+is printed, unless the @option{-H} option is supplied.
+When more than one
+resource is specified, the limit name and unit, if appropriate,
+are printed before the value.
+When setting new limits, if neither @option{-H} nor @option{-S} is supplied,
+both the hard and soft limits are set.
+If no option is given, then @option{-f} is assumed.  Values are in 1024-byte
+increments, except for
+@option{-t}, which is in seconds;
+@option{-R}, which is in microseconds;
+@option{-p}, which is in units of 512-byte blocks;
+@option{-P},
+@option{-T},
+@option{-b},
+@option{-k},
+@option{-n} and @option{-u}, which are unscaled values;
+and, when in @sc{posix} Mode (@pxref{Bash POSIX Mode}),
+@option{-c} and @option{-f}, which are in 512-byte increments.
+
+The return status is zero unless an invalid option or argument is supplied,
+or an error occurs while setting a new limit.
+
+@item unalias
+@btindex unalias
+@example
+unalias [-a] [@var{name} @dots{} ]
+@end example
+
+Remove each @var{name} from the list of aliases.  If @option{-a} is
+supplied, all aliases are removed.
+Aliases are described in @ref{Aliases}.
+@end table
+
+@node Modifying Shell Behavior
+@section Modifying Shell Behavior
+ 
+@menu
+* The Set Builtin::		Change the values of shell attributes and
+				positional parameters.
+* The Shopt Builtin::		Modify shell optional behavior.
+@end menu
+
+@node The Set Builtin
+@subsection The Set Builtin
+
+This builtin is so complicated that it deserves its own section.  @code{set}
+allows you to change the values of shell options and set the positional
+parameters, or to display the names and values of shell variables.
+
+@table @code
+@item set
+@btindex set
+@example
+set [--abefhkmnptuvxBCEHPT] [-o @var{option-name}] [@var{argument} @dots{}]
+set [+abefhkmnptuvxBCEHPT] [+o @var{option-name}] [@var{argument} @dots{}]
+@end example
+
+If no options or arguments are supplied, @code{set} displays the names
+and values of all shell variables and functions, sorted according to the
+current locale, in a format that may be reused as input
+for setting or resetting the currently-set variables.
+Read-only variables cannot be reset.
+In @sc{posix} mode, only shell variables are listed.
+
+When options are supplied, they set or unset shell attributes.
+Options, if specified, have the following meanings:
+
+@table @code
+@item -a
+Each variable or function that is created or modified is given the
+export attribute and marked for export to the environment of
+subsequent commands.
+
+@item -b
+Cause the status of terminated background jobs to be reported
+immediately, rather than before printing the next primary prompt.
+
+@item -e
+Exit immediately if
+a pipeline (@pxref{Pipelines}), which may consist of a single simple command
+(@pxref{Simple Commands}),
+a list (@pxref{Lists}),
+or a compound command (@pxref{Compound Commands})
+returns a non-zero status.
+The shell does not exit if the command that fails is part of the
+command list immediately following a @code{while} or @code{until} keyword,
+part of the test in an @code{if} statement,
+part of any command executed in a @code{&&} or @code{||} list except
+the command following the final @code{&&} or @code{||},
+any command in a pipeline but the last,
+or if the command's return status is being inverted with @code{!}.
+If a compound command other than a subshell
+returns a non-zero status because a command failed
+while @option{-e} was being ignored, the shell does not exit.
+A trap on @code{ERR}, if set, is executed before the shell exits.
+
+This option applies to the shell environment and each subshell environment
+separately (@pxref{Command Execution Environment}), and may cause
+subshells to exit before executing all the commands in the subshell.
+
+If a compound command or shell function executes in a context where
+@option{-e} is being ignored,
+none of the commands executed within the compound command or function body
+will be affected by the @option{-e} setting, even if @option{-e} is set
+and a command returns a failure status.
+If a compound command or shell function sets @option{-e} while executing in
+a context where @option{-e} is ignored, that setting will not have any
+effect until the compound command or the command containing the function
+call completes.
+
+@item -f
+Disable filename expansion (globbing).
+
+@item -h
+Locate and remember (hash) commands as they are looked up for execution.
+This option is enabled by default.
+
+@item -k
+All arguments in the form of assignment statements are placed
+in the environment for a command, not just those that precede
+the command name.
+
+@item -m
+Job control is enabled (@pxref{Job Control}).
+All processes run in a separate process group.
+When a background job completes, the shell prints a line
+containing its exit status.
+
+@item -n
+Read commands but do not execute them.
+This may be used to check a script for syntax errors.
+This option is ignored by interactive shells.
+
+@item -o @var{option-name}
+
+Set the option corresponding to @var{option-name}:
+
+@table @code
+@item allexport
+Same as @code{-a}.
+
+@item braceexpand
+Same as @code{-B}.
+
+@item emacs
+Use an @code{emacs}-style line editing interface (@pxref{Command Line Editing}).
+This also affects the editing interface used for @code{read -e}.
+
+@item errexit
+Same as @code{-e}.
+
+@item errtrace
+Same as @code{-E}.
+
+@item functrace
+Same as @code{-T}.
+
+@item hashall
+Same as @code{-h}.
+
+@item histexpand
+Same as @code{-H}.
+
+@item history
+Enable command history, as described in @ref{Bash History Facilities}.
+This option is on by default in interactive shells.
+
+@item ignoreeof
+An interactive shell will not exit upon reading EOF.
+
+@item keyword
+Same as @code{-k}.
+
+@item monitor
+Same as @code{-m}.
+
+@item noclobber
+Same as @code{-C}.
+
+@item noexec
+Same as @code{-n}.
+
+@item noglob
+Same as @code{-f}.
+
+@item nolog
+Currently ignored.
+
+@item notify
+Same as @code{-b}.
+
+@item nounset
+Same as @code{-u}.
+
+@item onecmd
+Same as @code{-t}.
+
+@item physical
+Same as @code{-P}.
+
+@item pipefail
+If set, the return value of a pipeline is the value of the last
+(rightmost) command to exit with a non-zero status, or zero if all
+commands in the pipeline exit successfully.
+This option is disabled by default.
+
+@item posix
+Change the behavior of Bash where the default operation differs
+from the @sc{posix} standard to match the standard
+(@pxref{Bash POSIX Mode}).
+This is intended to make Bash behave as a strict superset of that
+standard.
+
+@item privileged
+Same as @code{-p}.
+
+@item verbose
+Same as @code{-v}.
+
+@item vi
+Use a @code{vi}-style line editing interface.
+This also affects the editing interface used for @code{read -e}.
+
+@item xtrace
+Same as @code{-x}.
+@end table
+
+@item -p
+Turn on privileged mode.
+In this mode, the @env{$BASH_ENV} and @env{$ENV} files are not
+processed, shell functions are not inherited from the environment,
+and the @env{SHELLOPTS}, @env{BASHOPTS}, @env{CDPATH} and @env{GLOBIGNORE}
+variables, if they appear in the environment, are ignored.
+If the shell is started with the effective user (group) id not equal to the
+real user (group) id, and the @option{-p} option is not supplied, these actions
+are taken and the effective user id is set to the real user id.
+If the @option{-p} option is supplied at startup, the effective user id is
+not reset.
+Turning this option off causes the effective user
+and group ids to be set to the real user and group ids.
+
+@item -t
+Exit after reading and executing one command.
+
+@item -u
+Treat unset variables and parameters other than the special parameters
+@samp{@@} or @samp{*} as an error when performing parameter expansion.
+An error message will be written to the standard error, and a non-interactive
+shell will exit.
+
+@item -v
+Print shell input lines as they are read.
+
+@item -x
+Print a trace of simple commands, @code{for} commands, @code{case}
+commands, @code{select} commands, and arithmetic @code{for} commands
+and their arguments or associated word lists after they are
+expanded and before they are executed.  The value of the @env{PS4}
+variable is expanded and the resultant value is printed before
+the command and its expanded arguments.
+
+@item -B
+The shell will perform brace expansion (@pxref{Brace Expansion}).
+This option is on by default.
+
+@item -C
+Prevent output redirection using @samp{>}, @samp{>&}, and @samp{<>}
+from overwriting existing files.
+
+@item -E
+If set, any trap on @code{ERR} is inherited by shell functions, command
+substitutions, and commands executed in a subshell environment.
+The @code{ERR} trap is normally not inherited in such cases.
+
+@item -H
+Enable @samp{!} style history substitution (@pxref{History Interaction}).
+This option is on by default for interactive shells.
+
+@item -P
+If set, do not resolve symbolic links when performing commands such as
+@code{cd} which change the current directory.  The physical directory
+is used instead.  By default, Bash follows
+the logical chain of directories when performing commands
+which change the current directory.
+
+For example, if @file{/usr/sys} is a symbolic link to @file{/usr/local/sys}
+then:
+@example
+$ cd /usr/sys; echo $PWD
+/usr/sys
+$ cd ..; pwd
+/usr
+@end example
+
+@noindent
+If @code{set -P} is on, then:
+@example
+$ cd /usr/sys; echo $PWD
+/usr/local/sys
+$ cd ..; pwd
+/usr/local
+@end example
+
+@item -T
+If set, any trap on @code{DEBUG} and @code{RETURN} are inherited by
+shell functions, command substitutions, and commands executed
+in a subshell environment.
+The @code{DEBUG} and @code{RETURN} traps are normally not inherited
+in such cases.
+
+@item --
+If no arguments follow this option, then the positional parameters are
+unset.  Otherwise, the positional parameters are set to the
+@var{arguments}, even if some of them begin with a @samp{-}.
+
+@item -
+Signal the end of options, cause all remaining @var{arguments}
+to be assigned to the positional parameters.  The @option{-x}
+and @option{-v}  options are turned off.
+If there are no arguments, the positional parameters remain unchanged.
+@end table
+
+Using @samp{+} rather than @samp{-} causes these options to be
+turned off.  The options can also be used upon invocation of the
+shell.  The current set of options may be found in @code{$-}.
+
+The remaining N @var{arguments} are positional parameters and are
+assigned, in order, to @code{$1}, @code{$2}, @dots{}  @code{$N}.
+The special parameter @code{#} is set to N.
+
+The return status is always zero unless an invalid option is supplied.
+@end table
+
+@node The Shopt Builtin
+@subsection The Shopt Builtin
+
+This builtin allows you to change additional shell optional behavior.
+
+@table @code
+
+@item shopt
+@btindex shopt
+@example
+shopt [-pqsu] [-o] [@var{optname} @dots{}]
+@end example
+
+Toggle the values of settings controlling optional shell behavior.
+The settings can be either those listed below, or, if the
+@option{-o} option is used, those available with the @option{-o}
+option to the @code{set} builtin command (@pxref{The Set Builtin}).
+With no options, or with the @option{-p} option, a list of all settable
+options is displayed, with an indication of whether or not each is set;
+if @var{optnames} are supplied, the output is restricted to those options.
+The @option{-p} option causes output to be displayed in a form that
+may be reused as input.
+Other options have the following meanings:
+
+@table @code
+@item -s
+Enable (set) each @var{optname}.
+
+@item -u
+Disable (unset) each @var{optname}.
+
+@item -q
+Suppresses normal output; the return status
+indicates whether the @var{optname} is set or unset.
+If multiple @var{optname} arguments are given with @option{-q},
+the return status is zero if all @var{optnames} are enabled;
+non-zero otherwise.
+
+@item -o
+Restricts the values of
+@var{optname} to be those defined for the @option{-o} option to the
+@code{set} builtin (@pxref{The Set Builtin}).
+@end table
+
+If either @option{-s} or @option{-u}
+is used with no @var{optname} arguments, @code{shopt} shows only
+those options which are set or unset, respectively.
+
+Unless otherwise noted, the @code{shopt} options are disabled (off)
+by default.
+
+The return status when listing options is zero if all @var{optnames}
+are enabled, non-zero otherwise.  When setting or unsetting options,
+the return status is zero unless an @var{optname} is not a valid shell
+option.
+
+The list of @code{shopt} options is:
+@table @code
+
+@item assoc_expand_once
+If set, the shell suppresses multiple evaluation of associative array
+subscripts during arithmetic expression evaluation, while executing
+builtins that can perform variable assignments,
+and while executing builtins that perform array dereferencing.
+
+@item autocd
+If set, a command name that is the name of a directory is executed as if
+it were the argument to the @code{cd} command.
+This option is only used by interactive shells.
+
+@item cdable_vars
+If this is set, an argument to the @code{cd} builtin command that
+is not a directory is assumed to be the name of a variable whose
+value is the directory to change to.
+
+@item cdspell
+If set, minor errors in the spelling of a directory component in a
+@code{cd} command will be corrected.
+The errors checked for are transposed characters,
+a missing character, and a character too many.
+If a correction is found, the corrected path is printed,
+and the command proceeds.
+This option is only used by interactive shells.
+
+@item checkhash
+If this is set, Bash checks that a command found in the hash
+table exists before trying to execute it.  If a hashed command no
+longer exists, a normal path search is performed.
+
+@item checkjobs
+If set, Bash lists the status of any stopped and running jobs before
+exiting an interactive shell.  If any jobs are running, this causes
+the exit to be deferred until a second exit is attempted without an
+intervening command (@pxref{Job Control}).
+The shell always postpones exiting if any jobs are stopped.
+
+@item checkwinsize
+If set, Bash checks the window size after each external (non-builtin)
+command and, if necessary, updates the values of    
+@env{LINES} and @env{COLUMNS}.
+This option is enabled by default.
+
+@item cmdhist
+If set, Bash
+attempts to save all lines of a multiple-line
+command in the same history entry.  This allows
+easy re-editing of multi-line commands.
+This option is enabled by default, but only has an effect if command
+history is enabled (@pxref{Bash History Facilities}).
+
+@item compat31
+@itemx compat32
+@itemx compat40
+@itemx compat41
+@itemx compat42
+@itemx compat43
+@itemx compat44
+These control aspects of the shell's compatibility mode
+(@pxref{Shell Compatibility Mode}).
+
+@item complete_fullquote
+If set, Bash
+quotes all shell metacharacters in filenames and directory names when
+performing completion.
+If not set, Bash
+removes metacharacters such as the dollar sign from the set of
+characters that will be quoted in completed filenames
+when these metacharacters appear in shell variable references in words to be
+completed.
+This means that dollar signs in variable names that expand to directories
+will not be quoted;
+however, any dollar signs appearing in filenames will not be quoted, either.
+This is active only when bash is using backslashes to quote completed
+filenames.
+This variable is set by default, which is the default Bash behavior in
+versions through 4.2.
+
+@item direxpand
+If set, Bash
+replaces directory names with the results of word expansion when performing
+filename completion.  This changes the contents of the readline editing
+buffer.
+If not set, Bash attempts to preserve what the user typed.
+
+@item dirspell
+If set, Bash
+attempts spelling correction on directory names during word completion 
+if the directory name initially supplied does not exist.
+
+@item dotglob
+If set, Bash includes filenames beginning with a `.' in
+the results of filename expansion.
+The filenames @samp{.} and @samp{..} must always be matched explicitly,
+even if @code{dotglob} is set.
+
+@item execfail
+If this is set, a non-interactive shell will not exit if
+it cannot execute the file specified as an argument to the @code{exec}
+builtin command.  An interactive shell does not exit if @code{exec}
+fails.
+
+@item expand_aliases
+If set, aliases are expanded as described below under Aliases,
+@ref{Aliases}.
+This option is enabled by default for interactive shells.
+
+@item extdebug
+If set at shell invocation,
+or in a shell startup file,
+arrange to execute the debugger profile
+before the shell starts, identical to the @option{--debugger} option.
+If set after invocation, behavior intended for use by debuggers is enabled:
+
+@enumerate
+@item
+The @option{-F} option to the @code{declare} builtin (@pxref{Bash Builtins})
+displays the source file name and line number corresponding to each function
+name supplied as an argument.
+
+@item
+If the command run by the @code{DEBUG} trap returns a non-zero value, the
+next command is skipped and not executed.
+
+@item
+If the command run by the @code{DEBUG} trap returns a value of 2, and the
+shell is executing in a subroutine (a shell function or a shell script
+executed by the @code{.} or @code{source} builtins), the shell simulates
+a call to @code{return}.
+
+@item
+@code{BASH_ARGC} and @code{BASH_ARGV} are updated as described in their
+descriptions (@pxref{Bash Variables}).
+
+@item
+Function tracing is enabled: command substitution, shell functions, and
+subshells invoked with @code{( @var{command} )} inherit the
+@code{DEBUG} and @code{RETURN} traps.
+
+@item
+Error tracing is enabled: command substitution, shell functions, and
+subshells invoked with @code{( @var{command} )} inherit the
+@code{ERR} trap.
+@end enumerate
+
+@item extglob
+If set, the extended pattern matching features described above
+(@pxref{Pattern Matching}) are enabled.
+
+@item extquote
+If set, @code{$'@var{string}'} and @code{$"@var{string}"} quoting is  
+performed within @code{$@{@var{parameter}@}} expansions                     
+enclosed in double quotes.  This option is enabled by default. 
+
+@item failglob
+If set, patterns which fail to match filenames during filename expansion
+result in an expansion error.
+
+@item force_fignore
+If set, the suffixes specified by the @env{FIGNORE} shell variable
+cause words to be ignored when performing word completion even if
+the ignored words are the only possible completions.
+@xref{Bash Variables}, for a description of @env{FIGNORE}.
+This option is enabled by default.
+
+@item globasciiranges
+If set, range expressions used in pattern matching bracket expressions
+(@pxref{Pattern Matching})
+behave as if in the traditional C locale when performing
+comparisons.  That is, the current locale's collating sequence
+is not taken into account, so
+@samp{b} will not collate between @samp{A} and @samp{B},
+and upper-case and lower-case ASCII characters will collate together.   
+
+@item globstar
+If set, the pattern @samp{**} used in a filename expansion context will
+match all files and zero or more directories and subdirectories.
+If the pattern is followed by a @samp{/}, only directories and
+subdirectories match.
+
+@item gnu_errfmt
+If set, shell error messages are written in the standard @sc{gnu} error
+message format.
+
+@item histappend
+If set, the history list is appended to the file named by the value
+of the @env{HISTFILE}
+variable when the shell exits, rather than overwriting the file.
+
+@item histreedit
+If set, and Readline
+is being used, a user is given the opportunity to re-edit a
+failed history substitution.
+
+@item histverify
+If set, and Readline
+is being used, the results of history substitution are not immediately
+passed to the shell parser.  Instead, the resulting line is loaded into
+the Readline editing buffer, allowing further modification.
+
+@item hostcomplete
+If set, and Readline is being used, Bash will attempt to perform
+hostname completion when a word containing a @samp{@@} is being
+completed (@pxref{Commands For Completion}).  This option is enabled
+by default.
+
+@item huponexit
+If set, Bash will send @code{SIGHUP} to all jobs when an interactive
+login shell exits (@pxref{Signals}).
+
+@item inherit_errexit
+If set, command substitution inherits the value of the @code{errexit} option,
+instead of unsetting it in the subshell environment.
+This option is enabled when @sc{posix} mode is enabled.
+
+@item interactive_comments
+Allow a word beginning with @samp{#}
+to cause that word and all remaining characters on that
+line to be ignored in an interactive shell.
+This option is enabled by default.
+
+@item lastpipe
+If set, and job control is not active, the shell runs the last command of
+a pipeline not executed in the background in the current shell environment.
+
+@item lithist
+If enabled, and the @code{cmdhist}
+option is enabled, multi-line commands are saved to the history with
+embedded newlines rather than using semicolon separators where possible.
+
+@item localvar_inherit
+If set, local variables inherit the value and attributes of a variable of
+the same name that exists at a previous scope before any new value is
+assigned.  The @var{nameref} attribute is not inherited.
+
+@item localvar_unset
+If set, calling @code{unset} on local variables in previous function scopes
+marks them so subsequent lookups find them unset until that function
+returns. This is identical to the behavior of unsetting local variables
+at the current function scope.
+
+@item login_shell
+The shell sets this option if it is started as a login shell
+(@pxref{Invoking Bash}).
+The value may not be changed.
+
+@item mailwarn
+If set, and a file that Bash is checking for mail has been
+accessed since the last time it was checked, the message
+@code{"The mail in @var{mailfile} has been read"} is displayed.
+
+@item no_empty_cmd_completion
+If set, and Readline is being used, Bash will not attempt to search
+the @env{PATH} for possible completions when completion is attempted
+on an empty line.
+
+@item nocaseglob
+If set, Bash matches filenames in a case-insensitive fashion when
+performing filename expansion.
+
+@item nocasematch
+If set, Bash matches patterns in a case-insensitive fashion when
+performing matching while executing @code{case} or @code{[[}
+conditional commands,
+when performing pattern substitution word expansions,
+or when filtering possible completions as part of programmable completion.
+
+@item nullglob
+If set, Bash allows filename patterns which match no
+files to expand to a null string, rather than themselves.
+
+@item progcomp
+If set, the programmable completion facilities
+(@pxref{Programmable Completion}) are enabled.
+This option is enabled by default.
+
+@item progcomp_alias
+If set, and programmable completion is enabled, Bash treats a command
+name that doesn't have any completions as a possible alias and attempts
+alias expansion. If it has an alias, Bash attempts programmable
+completion using the command word resulting from the expanded alias.
+
+@item promptvars
+If set, prompt strings undergo
+parameter expansion, command substitution, arithmetic
+expansion, and quote removal after being expanded
+as described below (@pxref{Controlling the Prompt}).
+This option is enabled by default.
+
+@item restricted_shell
+The shell sets this option if it is started in restricted mode
+(@pxref{The Restricted Shell}).
+The value may not be changed.
+This is not reset when the startup files are executed, allowing
+the startup files to discover whether or not a shell is restricted.
+
+@item shift_verbose
+If this is set, the @code{shift}
+builtin prints an error message when the shift count exceeds the
+number of positional parameters.
+
+@item sourcepath
+If set, the @code{source} builtin uses the value of @env{PATH}
+to find the directory containing the file supplied as an argument.
+This option is enabled by default.
+
+@item xpg_echo
+If set, the @code{echo} builtin expands backslash-escape sequences
+by default.
+
+@end table
+@end table
+
+@node Special Builtins
+@section Special Builtins
+@cindex special builtin
+
+For historical reasons, the @sc{posix} standard has classified
+several builtin commands as @emph{special}.
+When Bash is executing in @sc{posix} mode, the special builtins
+differ from other builtin commands in three respects:
+
+@enumerate
+@item
+Special builtins are found before shell functions during command lookup.
+
+@item
+If a special builtin returns an error status, a non-interactive shell exits.
+
+@item
+Assignment statements preceding the command stay in effect in the shell
+environment after the command completes.
+@end enumerate
+
+When Bash is not executing in @sc{posix} mode, these builtins behave no
+differently than the rest of the Bash builtin commands.
+The Bash @sc{posix} mode is described in @ref{Bash POSIX Mode}. 
+
+These are the @sc{posix} special builtins:
+@example
+@w{break : . continue eval exec exit export readonly return set}
+@w{shift trap unset}
+@end example
+
+@node Shell Variables
+@chapter Shell Variables
+
+@menu
+* Bourne Shell Variables::	Variables which Bash uses in the same way
+				as the Bourne Shell.
+* Bash Variables::		List of variables that exist in Bash.
+@end menu
+
+This chapter describes the shell variables that Bash uses.
+Bash automatically assigns default values to a number of variables.
+
+@node Bourne Shell Variables
+@section Bourne Shell Variables
+
+Bash uses certain shell variables in the same way as the Bourne shell.
+In some cases, Bash assigns a default value to the variable.
+
+@vtable @code
+
+@item CDPATH
+A colon-separated list of directories used as a search path for
+the @code{cd} builtin command.
+
+@item HOME
+The current user's home directory; the default for the @code{cd} builtin
+command.
+The value of this variable is also used by tilde expansion
+(@pxref{Tilde Expansion}).
+
+@item IFS
+A list of characters that separate fields; used when the shell splits
+words as part of expansion.
+
+@item MAIL
+If this parameter is set to a filename or directory name
+and the @env{MAILPATH} variable
+is not set, Bash informs the user of the arrival of mail in
+the specified file or Maildir-format directory.
+
+@item MAILPATH
+A colon-separated list of filenames which the shell periodically checks
+for new mail.
+Each list entry can specify the message that is printed when new mail
+arrives in the mail file by separating the filename from the message with
+a @samp{?}.
+When used in the text of the message, @code{$_} expands to the name of
+the current mail file.
+
+@item OPTARG
+The value of the last option argument processed by the @code{getopts} builtin.
+
+@item OPTIND
+The index of the last option argument processed by the @code{getopts} builtin.
+
+@item PATH
+A colon-separated list of directories in which the shell looks for
+commands.
+A zero-length (null) directory name in the value of @code{PATH} indicates the
+current directory.
+A null directory name may appear as two adjacent colons, or as an initial
+or trailing colon.
+
+@item PS1
+The primary prompt string.  The default value is @samp{\s-\v\$ }.
+@xref{Controlling the Prompt}, for the complete list of escape
+sequences that are expanded before @env{PS1} is displayed.
+
+@item PS2
+The secondary prompt string.  The default value is @samp{> }.
+@env{PS2} is expanded in the same way as @env{PS1} before being
+displayed.
+
+@end vtable
+
+@node Bash Variables
+@section Bash Variables
+
+These variables are set or used by Bash, but other shells
+do not normally treat them specially.
+
+A few variables used by Bash are described in different chapters:
+variables for controlling the job control facilities
+(@pxref{Job Control Variables}).
+
+@vtable @code
+
+@item _
+@vindex $_
+($_, an underscore.)
+At shell startup, set to the pathname used to invoke the
+shell or shell script being executed as passed in the environment
+or argument list.
+Subsequently, expands to the last argument to the previous simple
+command executed in the foreground, after expansion. 
+Also set to the full pathname used to invoke each command executed
+and placed in the environment exported to that command.
+When checking mail, this parameter holds the name of the mail file.
+
+@item BASH
+The full pathname used to execute the current instance of Bash.
+
+@item BASHOPTS
+A colon-separated list of enabled shell options.  Each word in
+the list is a valid argument for the @option{-s} option to the
+@code{shopt} builtin command (@pxref{The Shopt Builtin}).
+The options appearing in @env{BASHOPTS} are those reported
+as @samp{on} by @samp{shopt}.
+If this variable is in the environment when Bash
+starts up, each shell option in the list will be enabled before
+reading any startup files.  This variable is readonly.
+
+@item BASHPID
+Expands to the process ID of the current Bash process.
+This differs from @code{$$} under certain circumstances, such as subshells
+that do not require Bash to be re-initialized.
+Assignments to @env{BASHPID} have no effect.
+If @env{BASHPID}
+is unset, it loses its special properties, even if it is
+subsequently reset.
+
+@item BASH_ALIASES
+An associative array variable whose members correspond to the internal
+list of aliases as maintained by the @code{alias} builtin.
+(@pxref{Bourne Shell Builtins}).
+Elements added to this array appear in the alias list; however,
+unsetting array elements currently does not cause aliases to be removed
+from the alias list.
+If @env{BASH_ALIASES}
+is unset, it loses its special properties, even if it is
+subsequently reset.
+
+@item BASH_ARGC
+An array variable whose values are the number of parameters in each
+frame of the current bash execution call stack.  The number of
+parameters to the current subroutine (shell function or script executed
+with @code{.} or @code{source}) is at the top of the stack.  When a
+subroutine is executed, the number of parameters passed is pushed onto
+@code{BASH_ARGC}.
+The shell sets @code{BASH_ARGC} only when in extended debugging mode
+(see @ref{The Shopt Builtin}
+for a description of the @code{extdebug} option to the @code{shopt}
+builtin).
+Setting @code{extdebug} after the shell has started to execute a script,
+or referencing this variable when @code{extdebug} is not set,
+may result in inconsistent values.
+
+@item BASH_ARGV
+An array variable containing all of the parameters in the current bash
+execution call stack.  The final parameter of the last subroutine call
+is at the top of the stack; the first parameter of the initial call is
+at the bottom.  When a subroutine is executed, the parameters supplied
+are pushed onto @code{BASH_ARGV}.
+The shell sets @code{BASH_ARGV} only when in extended debugging mode
+(see @ref{The Shopt Builtin}
+for a description of the @code{extdebug} option to the @code{shopt}
+builtin).
+Setting @code{extdebug} after the shell has started to execute a script,
+or referencing this variable when @code{extdebug} is not set,
+may result in inconsistent values.
+
+@item BASH_ARGV0
+When referenced, this variable expands to the name of the shell or shell
+script (identical to @code{$0}; @xref{Special Parameters},
+for the description of special parameter 0).
+Assignment to @code{BASH_ARGV0}
+causes the value assigned to also be assigned to @code{$0}.
+If @env{BASH_ARGV0}
+is unset, it loses its special properties, even if it is
+subsequently reset.
+
+@item BASH_CMDS
+An associative array variable whose members correspond to the internal
+hash table of commands as maintained by the @code{hash} builtin
+(@pxref{Bourne Shell Builtins}).
+Elements added to this array appear in the hash table; however,
+unsetting array elements currently does not cause command names to be removed
+from the hash table.
+If @env{BASH_CMDS}
+is unset, it loses its special properties, even if it is
+subsequently reset.
+
+@item BASH_COMMAND
+The command currently being executed or about to be executed, unless the
+shell is executing a command as the result of a trap,
+in which case it is the command executing at the time of the trap.
+If @env{BASH_COMMAND}
+is unset, it loses its special properties, even if it is
+subsequently reset.
+
+@item BASH_COMPAT
+The value is used to set the shell's compatibility level.
+@xref{Shell Compatibility Mode}, for a description of the various
+compatibility levels and their effects.
+The value may be a decimal number (e.g., 4.2) or an integer (e.g., 42)
+corresponding to the desired compatibility level.
+If @env{BASH_COMPAT} is unset or set to the empty string, the compatibility
+level is set to the default for the current version.
+If @env{BASH_COMPAT} is set to a value that is not one of the valid
+compatibility levels, the shell prints an error message and sets the
+compatibility level to the default for the current version.
+The valid values correspond to the compatibility levels
+described below (@pxref{Shell Compatibility Mode}).
+For example, 4.2 and 42 are valid values that correspond
+to the @code{compat42} @code{shopt} option
+and set the compatibility level to 42.
+The current version is also a valid value.
+
+@item BASH_ENV
+If this variable is set when Bash is invoked to execute a shell
+script, its value is expanded and used as the name of a startup file
+to read before executing the script.  @xref{Bash Startup Files}.
+
+@item BASH_EXECUTION_STRING
+The command argument to the @option{-c} invocation option.
+
+@item BASH_LINENO
+An array variable whose members are the line numbers in source files
+where each corresponding member of @var{FUNCNAME} was invoked.
+@code{$@{BASH_LINENO[$i]@}} is the line number in the source file
+(@code{$@{BASH_SOURCE[$i+1]@}}) where
+@code{$@{FUNCNAME[$i]@}} was called (or @code{$@{BASH_LINENO[$i-1]@}} if
+referenced within another shell function). 
+Use @code{LINENO} to obtain the current line number.
+
+@item BASH_LOADABLES_PATH
+A colon-separated list of directories in which the shell looks for
+dynamically loadable builtins specified by the
+@code{enable} command.
+
+@item BASH_REMATCH
+An array variable whose members are assigned by the @samp{=~} binary
+operator to the @code{[[} conditional command
+(@pxref{Conditional Constructs}).
+The element with index 0 is the portion of the string
+matching the entire regular expression.
+The element with index @var{n} is the portion of the
+string matching the @var{n}th parenthesized subexpression.
+
+@item BASH_SOURCE
+An array variable whose members are the source filenames where the
+corresponding shell function names in the @code{FUNCNAME} array
+variable are defined.
+The shell function @code{$@{FUNCNAME[$i]@}} is defined in the file
+@code{$@{BASH_SOURCE[$i]@}} and called from @code{$@{BASH_SOURCE[$i+1]@}}
+
+@item BASH_SUBSHELL
+Incremented by one within each subshell or subshell environment when
+the shell begins executing in that environment.
+The initial value is 0.
+If @env{BASH_SUBSHELL}
+is unset, it loses its special properties, even if it is
+subsequently reset.
+
+@item BASH_VERSINFO
+A readonly array variable (@pxref{Arrays})
+whose members hold version information for this instance of Bash.
+The values assigned to the array members are as follows:
+
+@table @code
+
+@item BASH_VERSINFO[0]
+The major version number (the @var{release}).
+
+@item BASH_VERSINFO[1]
+The minor version number (the @var{version}).
+
+@item BASH_VERSINFO[2]
+The patch level.
+
+@item BASH_VERSINFO[3]
+The build version.
+
+@item BASH_VERSINFO[4]
+The release status (e.g., @var{beta1}).
+
+@item BASH_VERSINFO[5]
+The value of @env{MACHTYPE}.
+@end table
+
+@item BASH_VERSION
+The version number of the current instance of Bash.
+
+@item BASH_XTRACEFD
+If set to an integer corresponding to a valid file descriptor, Bash
+will write the trace output generated when @samp{set -x}
+is enabled to that file descriptor.
+This allows tracing output to be separated from diagnostic and error
+messages.
+The file descriptor is closed when @code{BASH_XTRACEFD} is unset or assigned
+a new value.
+Unsetting @code{BASH_XTRACEFD} or assigning it the empty string causes the
+trace output to be sent to the standard error.
+Note that setting @code{BASH_XTRACEFD} to 2 (the standard error file
+descriptor) and then unsetting it will result in the standard error
+being closed.
+
+@item CHILD_MAX
+Set the number of exited child status values for the shell to remember.
+Bash will not allow this value to be decreased below a @sc{posix}-mandated
+minimum, and there is a maximum value (currently 8192) that this may
+not exceed.
+The minimum value is system-dependent.
+
+@item COLUMNS
+Used by the @code{select} command to determine the terminal width
+when printing selection lists.
+Automatically set if the @code{checkwinsize} option is enabled
+(@pxref{The Shopt Builtin}), or in an interactive shell upon receipt of a
+@code{SIGWINCH}.
+
+@item COMP_CWORD
+An index into @env{$@{COMP_WORDS@}} of the word containing the current
+cursor position.
+This variable is available only in shell functions invoked by the
+programmable completion facilities (@pxref{Programmable Completion}).
+
+@item COMP_LINE
+The current command line.
+This variable is available only in shell functions and external
+commands invoked by the
+programmable completion facilities (@pxref{Programmable Completion}).
+
+@item COMP_POINT
+The index of the current cursor position relative to the beginning of
+the current command.
+If the current cursor position is at the end of the current command,
+the value of this variable is equal to @code{$@{#COMP_LINE@}}.
+This variable is available only in shell functions and external
+commands invoked by the
+programmable completion facilities (@pxref{Programmable Completion}).
+
+@item COMP_TYPE
+Set to an integer value corresponding to the type of completion attempted
+that caused a completion function to be called:
+@var{TAB}, for normal completion,
+@samp{?}, for listing completions after successive tabs,
+@samp{!}, for listing alternatives on partial word completion,
+@samp{@@}, to list completions if the word is not unmodified,
+or
+@samp{%}, for menu completion.
+This variable is available only in shell functions and external
+commands invoked by the
+programmable completion facilities (@pxref{Programmable Completion}).
+
+@item COMP_KEY
+The key (or final key of a key sequence) used to invoke the current
+completion function.
+
+@item COMP_WORDBREAKS
+The set of characters that the Readline library treats as word
+separators when performing word completion.
+If @env{COMP_WORDBREAKS}
+is unset, it loses its special properties,
+even if it is subsequently reset.
+
+@item COMP_WORDS
+An array variable consisting of the individual
+words in the current command line.
+The line is split into words as Readline would split it, using
+@code{COMP_WORDBREAKS} as described above.
+This variable is available only in shell functions invoked by the
+programmable completion facilities (@pxref{Programmable Completion}).
+
+@item COMPREPLY
+An array variable from which Bash reads the possible completions
+generated by a shell function invoked by the programmable completion
+facility (@pxref{Programmable Completion}).
+Each array element contains one possible completion.
+
+@item COPROC
+An array variable created to hold the file descriptors
+for output from and input to an unnamed coprocess (@pxref{Coprocesses}).
+
+@item DIRSTACK
+An array variable containing the current contents of the directory stack.
+Directories appear in the stack in the order they are displayed by the
+@code{dirs} builtin.
+Assigning to members of this array variable may be used to modify
+directories already in the stack, but the @code{pushd} and @code{popd}
+builtins must be used to add and remove directories.
+Assignment to this variable will not change the current directory.
+If @env{DIRSTACK}
+is unset, it loses its special properties, even if
+it is subsequently reset.
+
+@item EMACS
+If Bash finds this variable in the environment when the shell
+starts with value @samp{t}, it assumes that the shell is running in an
+Emacs shell buffer and disables line editing.
+
+@item ENV
+Expanded and executed similarlty to @code{BASH_ENV}
+(@pxref{Bash Startup Files})
+when an interactive shell is invoked in
+@sc{posix} Mode (@pxref{Bash POSIX Mode}).
+
+@item EPOCHREALTIME
+Each time this parameter is referenced, it expands to the number of seconds
+since the Unix Epoch as a floating point value with micro-second granularity
+(see the documentation for the C library function @var{time} for the
+definition of Epoch).
+Assignments to @env{EPOCHREALTIME} are ignored.
+If @env{EPOCHREALTIME}
+is unset, it loses its special properties, even if
+it is subsequently reset.
+
+@item EPOCHSECONDS
+Each time this parameter is referenced, it expands to the number of seconds
+since the Unix Epoch (see the documentation for the C library function
+@var{time} for the definition of Epoch).
+Assignments to @env{EPOCHSECONDS} are ignored.
+If @env{EPOCHSECONDS}
+is unset, it loses its special properties, even if
+it is subsequently reset.
+
+@item EUID
+The numeric effective user id of the current user.  This variable
+is readonly.
+
+@item EXECIGNORE
+A colon-separated list of shell patterns (@pxref{Pattern Matching})
+defining the list of filenames to be ignored by command search using
+@code{PATH}.
+Files whose full pathnames match one of these patterns are not considered
+executable files for the purposes of completion and command execution
+via @code{PATH} lookup.
+This does not affect the behavior of the @code{[}, @code{test}, and @code{[[}
+commands.
+Full pathnames in the command hash table are not subject to @code{EXECIGNORE}.
+Use this variable to ignore shared library files that have the executable
+bit set, but are not executable files.
+The pattern matching honors the setting of the @code{extglob} shell 
+option.
+
+@item FCEDIT
+The editor used as a default by the @option{-e} option to the @code{fc}
+builtin command.
+
+@item FIGNORE
+A colon-separated list of suffixes to ignore when performing
+filename completion.
+A filename whose suffix matches one of the entries in 
+@env{FIGNORE}
+is excluded from the list of matched filenames.  A sample
+value is @samp{.o:~}
+
+@item FUNCNAME
+An array variable containing the names of all shell functions
+currently in the execution call stack.
+The element with index 0 is the name of any currently-executing
+shell function.
+The bottom-most element (the one with the highest index)
+is @code{"main"}.
+This variable exists only when a shell function is executing.
+Assignments to @env{FUNCNAME} have no effect.
+If @env{FUNCNAME}
+is unset, it loses its special properties, even if
+it is subsequently reset.
+
+This variable can be used with @code{BASH_LINENO} and @code{BASH_SOURCE}.
+Each element of @code{FUNCNAME} has corresponding elements in
+@code{BASH_LINENO} and @code{BASH_SOURCE} to describe the call stack.
+For instance, @code{$@{FUNCNAME[$i]@}} was called from the file
+@code{$@{BASH_SOURCE[$i+1]@}} at line number @code{$@{BASH_LINENO[$i]@}}.
+The @code{caller} builtin displays the current call stack using this
+information.
+
+@item FUNCNEST
+If set to a numeric value greater than 0, defines a maximum function
+nesting level.  Function invocations that exceed this nesting level
+will cause the current command to abort.
+
+@item GLOBIGNORE
+A colon-separated list of patterns defining the set of file names to
+be ignored by filename expansion.
+If a file name matched by a filename expansion pattern also matches one
+of the patterns in @env{GLOBIGNORE}, it is removed from the list
+of matches.
+The pattern matching honors the setting of the @code{extglob} shell
+option.
+
+@item GROUPS
+An array variable containing the list of groups of which the current    
+user is a member.
+Assignments to @env{GROUPS} have no effect.
+If @env{GROUPS}
+is unset, it loses its special properties, even if it is
+subsequently reset.
+
+@item histchars
+Up to three characters which control history expansion, quick
+substitution, and tokenization (@pxref{History Interaction}).
+The first character is the
+@var{history expansion} character, that is, the character which signifies the
+start of a history expansion, normally @samp{!}.  The second character is the
+character which signifies `quick substitution' when seen as the first
+character on a line, normally @samp{^}.  The optional third character is the
+character which indicates that the remainder of the line is a comment when
+found as the first character of a word, usually @samp{#}.  The history
+comment character causes history substitution to be skipped for the
+remaining words on the line.  It does not necessarily cause the shell
+parser to treat the rest of the line as a comment.
+
+@item HISTCMD
+The history number, or index in the history list, of the current
+command.
+Assignments to @env{HISTCMD} are ignored.
+If @env{HISTCMD}
+is unset, it loses its special properties,
+even if it is subsequently reset.
+
+@item HISTCONTROL
+A colon-separated list of values controlling how commands are saved on
+the history list.
+If the list of values includes @samp{ignorespace}, lines which begin
+with a space character are not saved in the history list.
+A value of @samp{ignoredups} causes lines which match the previous
+history entry to not be saved.
+A value of @samp{ignoreboth} is shorthand for
+@samp{ignorespace} and @samp{ignoredups}.
+A value of @samp{erasedups} causes all previous lines matching the
+current line to be removed from the history list before that line
+is saved.
+Any value not in the above list is ignored.
+If @env{HISTCONTROL} is unset, or does not include a valid value, 
+all lines read by the shell parser are saved on the history list, 
+subject to the value of @env{HISTIGNORE}.
+The second and subsequent lines of a multi-line compound command are
+not tested, and are added to the history regardless of the value of
+@env{HISTCONTROL}.
+
+@item HISTFILE
+The name of the file to which the command history is saved.  The
+default value is @file{~/.bash_history}.
+
+@item HISTFILESIZE
+The maximum number of lines contained in the history file.
+When this variable is assigned a value, the history file is truncated,
+if necessary, to contain no more than that number of lines
+by removing the oldest entries.
+The history file is also truncated to this size after
+writing it when a shell exits.
+If the value is 0, the history file is truncated to zero size.
+Non-numeric values and numeric values less than zero inhibit truncation.
+The shell sets the default value to the value of @env{HISTSIZE}
+after reading any startup files.
+
+@item HISTIGNORE
+A colon-separated list of patterns used to decide which command
+lines should be saved on the history list.  Each pattern is
+anchored at the beginning of the line and must match the complete
+line (no implicit @samp{*} is appended).  Each pattern is tested
+against the line after the checks specified by @env{HISTCONTROL}
+are applied.  In addition to the normal shell pattern matching
+characters, @samp{&} matches the previous history line.  @samp{&}
+may be escaped using a backslash; the backslash is removed
+before attempting a match. 
+The second and subsequent lines of a multi-line compound command are
+not tested, and are added to the history regardless of the value of
+@env{HISTIGNORE}.
+The pattern matching honors the setting of the @code{extglob} shell
+option.
+
+@env{HISTIGNORE} subsumes the function of @env{HISTCONTROL}.  A
+pattern of @samp{&} is identical to @code{ignoredups}, and a
+pattern of @samp{[ ]*} is identical to @code{ignorespace}. 
+Combining these two patterns, separating them with a colon,
+provides the functionality of @code{ignoreboth}. 
+
+@item HISTSIZE
+The maximum number of commands to remember on the history list.
+If the value is 0, commands are not saved in the history list.
+Numeric values less than zero result in every command being saved
+on the history list (there is no limit).
+The shell sets the default value to 500 after reading any startup files.
+
+@item HISTTIMEFORMAT
+If this variable is set and not null, its value is used as a format string
+for @var{strftime} to print the time stamp associated with each history
+entry displayed by the @code{history} builtin.
+If this variable is set, time stamps are written to the history file so
+they may be preserved across shell sessions.
+This uses the history comment character to distinguish timestamps from
+other history lines.
+
+@item HOSTFILE
+Contains the name of a file in the same format as @file{/etc/hosts} that
+should be read when the shell needs to complete a hostname.
+The list of possible hostname completions may be changed while the shell
+is running;
+the next time hostname completion is attempted after the
+value is changed, Bash adds the contents of the new file to the
+existing list.
+If @env{HOSTFILE} is set, but has no value, or does not name a readable file,
+Bash attempts to read 
+@file{/etc/hosts} to obtain the list of possible hostname completions.
+When @env{HOSTFILE} is unset, the hostname list is cleared.
+
+@item HOSTNAME
+The name of the current host.
+
+@item HOSTTYPE
+A string describing the machine Bash is running on.
+
+@item IGNOREEOF
+Controls the action of the shell on receipt of an @code{EOF} character
+as the sole input.  If set, the value denotes the number
+of consecutive @code{EOF} characters that can be read as the
+first character on an input line
+before the shell will exit.  If the variable exists but does not
+have a numeric value, or has no value, then the default is 10.
+If the variable does not exist, then @code{EOF} signifies the end of 
+input to the shell.  This is only in effect for interactive shells.
+
+@item INPUTRC
+The name of the Readline initialization file, overriding the default
+of @file{~/.inputrc}.
+
+@item INSIDE_EMACS
+If Bash finds this variable in the environment when the shell
+starts, it assumes that the shell is running in an Emacs shell buffer
+and may disable line editing depending on the value of @env{TERM}.
+
+@item LANG  
+Used to determine the locale category for any category not specifically
+selected with a variable starting with @code{LC_}.
+
+@item LC_ALL
+This variable overrides the value of @env{LANG} and any other
+@code{LC_} variable specifying a locale category.
+
+@item LC_COLLATE
+This variable determines the collation order used when sorting the
+results of filename expansion, and
+determines the behavior of range expressions, equivalence classes,
+and collating sequences within filename expansion and pattern matching
+(@pxref{Filename Expansion}).
+
+@item LC_CTYPE
+This variable determines the interpretation of characters and the
+behavior of character classes within filename expansion and pattern
+matching (@pxref{Filename Expansion}).
+
+@item LC_MESSAGES
+This variable determines the locale used to translate double-quoted
+strings preceded by a @samp{$} (@pxref{Locale Translation}).
+
+@item LC_NUMERIC
+This variable determines the locale category used for number formatting.
+
+@item LC_TIME
+This variable determines the locale category used for data and time
+formatting.
+
+@item LINENO
+The line number in the script or shell function currently executing.
+If @env{LINENO}
+is unset, it loses its special properties, even if it is
+subsequently reset.
+
+@item LINES
+Used by the @code{select} command to determine the column length
+for printing selection lists.
+Automatically set if the @code{checkwinsize} option is enabled
+(@pxref{The Shopt Builtin}), or in an interactive shell upon receipt of a
+@code{SIGWINCH}.
+
+@item MACHTYPE
+A string that fully describes the system type on which Bash
+is executing, in the standard @sc{gnu} @var{cpu-company-system} format.
+
+@item MAILCHECK
+How often (in seconds) that the shell should check for mail in the
+files specified in the @env{MAILPATH} or @env{MAIL} variables.
+The default is 60 seconds.  When it is time to check
+for mail, the shell does so before displaying the primary prompt.
+If this variable is unset, or set to a value that is not a number
+greater than or equal to zero, the shell disables mail checking.
+
+@item MAPFILE
+An array variable created to hold the text read by the
+@code{mapfile} builtin when no variable name is supplied.
+
+@item OLDPWD
+The previous working directory as set by the @code{cd} builtin.
+
+@item OPTERR
+If set to the value 1, Bash displays error messages
+generated by the @code{getopts} builtin command.
+
+@item OSTYPE
+A string describing the operating system Bash is running on.
+
+@item PIPESTATUS
+An array variable (@pxref{Arrays})
+containing a list of exit status values from the processes
+in the most-recently-executed foreground pipeline (which may
+contain only a single command).
+
+@item POSIXLY_CORRECT
+If this variable is in the environment when Bash starts, the shell
+enters @sc{posix} mode (@pxref{Bash POSIX Mode}) before reading the
+startup files, as if the @option{--posix} invocation option had been supplied.
+If it is set while the shell is running, Bash enables @sc{posix} mode,
+as if the command
+@example
+@code{set -o posix}
+@end example
+@noindent
+had been executed.
+When the shell enters @sc{posix} mode, it sets this variable if it was
+not already set.
+
+@item PPID
+The process @sc{id} of the shell's parent process.  This variable
+is readonly.
+
+@item PROMPT_COMMAND
+If this variable is set, and is an array,
+the value of each set element is interpreted as a command to execute
+before printing the primary prompt (@env{$PS1}).
+If this is set but not an array variable,
+its value is used as a command to execute instead.
+
+@item PROMPT_DIRTRIM
+If set to a number greater than zero, the value is used as the number of
+trailing directory components to retain when expanding the @code{\w} and
+@code{\W} prompt string escapes (@pxref{Controlling the Prompt}).
+Characters removed are replaced with an ellipsis.
+
+@item PS0
+The value of this parameter is expanded like @env{PS1}
+and displayed by interactive shells after reading a command
+and before the command is executed.
+
+@item PS3
+The value of this variable is used as the prompt for the
+@code{select} command.  If this variable is not set, the
+@code{select} command prompts with @samp{#? }
+
+@item PS4
+The value of this parameter is expanded like @var{PS1}
+and the expanded value is the prompt printed before the command line
+is echoed when the @option{-x} option is set (@pxref{The Set Builtin}).
+The first character of the expanded value is replicated multiple times,
+as necessary, to indicate multiple levels of indirection.
+The default is @samp{+ }.
+
+@item PWD
+The current working directory as set by the @code{cd} builtin.
+
+@item RANDOM
+Each time this parameter is referenced, it expands to a random integer
+between 0 and 32767. Assigning a value to this
+variable seeds the random number generator.
+If @env{RANDOM}
+is unset, it loses its special properties, even if it is
+subsequently reset.
+
+@item READLINE_LINE
+The contents of the Readline line buffer, for use
+with @samp{bind -x} (@pxref{Bash Builtins}).
+
+@item READLINE_MARK
+The position of the @var{mark} (saved insertion point) in the
+Readline line buffer, for use
+with @samp{bind -x} (@pxref{Bash Builtins}).
+The characters between the insertion point and the mark are often
+called the @var{region}.
+
+@item READLINE_POINT
+The position of the insertion point in the Readline line buffer, for use
+with @samp{bind -x} (@pxref{Bash Builtins}).
+
+@item REPLY
+The default variable for the @code{read} builtin.
+
+@item SECONDS
+This variable expands to the number of seconds since the
+shell was started.  Assignment to this variable resets
+the count to the value assigned, and the expanded value
+becomes the value assigned plus the number of seconds
+since the assignment.
+The number of seconds at shell invocation and the current time is always
+determined by querying the system clock.
+If @env{SECONDS}
+is unset, it loses its special properties,
+even if it is subsequently reset.
+
+@item SHELL
+This environment variable expands to the full pathname to the shell.
+If it is not set when the shell starts,
+Bash assigns to it the full pathname of the current user's login shell.
+
+@item SHELLOPTS
+A colon-separated list of enabled shell options.  Each word in
+the list is a valid argument for the @option{-o} option to the
+@code{set} builtin command (@pxref{The Set Builtin}).
+The options appearing in @env{SHELLOPTS} are those reported
+as @samp{on} by @samp{set -o}.
+If this variable is in the environment when Bash
+starts up, each shell option in the list will be enabled before
+reading any startup files.  This variable is readonly.
+
+@item SHLVL
+Incremented by one each time a new instance of Bash is started.  This is
+intended to be a count of how deeply your Bash shells are nested.
+
+@item SRANDOM
+This variable expands to a 32-bit pseudo-random number each time it is
+referenced. The random number generator is not linear on systems that
+support @file{/dev/urandom} or @code{arc4random}, so each returned number
+has no relationship to the numbers preceding it.
+The random number generator cannot be seeded, so assignments to this
+variable have no effect.
+If @env{SRANDOM}
+is unset, it loses its special properties,
+even if it is subsequently reset.
+
+@item TIMEFORMAT
+The value of this parameter is used as a format string specifying
+how the timing information for pipelines prefixed with the @code{time}
+reserved word should be displayed.
+The @samp{%} character introduces an
+escape sequence that is expanded to a time value or other
+information.
+The escape sequences and their meanings are as
+follows; the braces denote optional portions. 
+
+@table @code
+
+@item %%
+A literal @samp{%}.
+
+@item %[@var{p}][l]R
+The elapsed time in seconds. 
+
+@item %[@var{p}][l]U
+The number of CPU seconds spent in user mode. 
+
+@item %[@var{p}][l]S
+The number of CPU seconds spent in system mode. 
+
+@item %P
+The CPU percentage, computed as (%U + %S) / %R. 
+@end table
+
+The optional @var{p} is a digit specifying the precision, the number of
+fractional digits after a decimal point.
+A value of 0 causes no decimal point or fraction to be output.
+At most three places after the decimal point may be specified; values
+of @var{p} greater than 3 are changed to 3.
+If @var{p} is not specified, the value 3 is used. 
+
+The optional @code{l} specifies a longer format, including minutes, of
+the form @var{MM}m@var{SS}.@var{FF}s.
+The value of @var{p} determines whether or not the fraction is included. 
+
+If this variable is not set, Bash acts as if it had the value
+@example
+@code{$'\nreal\t%3lR\nuser\t%3lU\nsys\t%3lS'}
+@end example
+If the value is null, no timing information is displayed.
+A trailing newline is added when the format string is displayed.
+
+@item TMOUT
+If set to a value greater than zero, @code{TMOUT} is treated as the
+default timeout for the @code{read} builtin (@pxref{Bash Builtins}).
+The @code{select} command (@pxref{Conditional Constructs}) terminates
+if input does not arrive after @code{TMOUT} seconds when input is coming
+from a terminal.
+
+In an interactive shell, the value is interpreted as
+the number of seconds to wait for a line of input after issuing
+the primary prompt.
+Bash
+terminates after waiting for that number of seconds if a complete
+line of input does not arrive.
+
+@item TMPDIR
+If set, Bash uses its value as the name of a directory in which
+Bash creates temporary files for the shell's use.
+
+@item UID
+The numeric real user id of the current user.  This variable is readonly.
+
+@end vtable
+
+@node Bash Features
+@chapter Bash Features
+
+This chapter describes features unique to Bash.
+
+@menu
+* Invoking Bash::		Command line options that you can give
+				to Bash.
+* Bash Startup Files::		When and how Bash executes scripts.
+* Interactive Shells::		What an interactive shell is.
+* Bash Conditional Expressions::	Primitives used in composing expressions for
+				the @code{test} builtin.
+* Shell Arithmetic::		Arithmetic on shell variables.
+* Aliases::			Substituting one command for another.
+* Arrays::			Array Variables.
+* The Directory Stack::		History of visited directories.
+* Controlling the Prompt::	Customizing the various prompt strings.
+* The Restricted Shell::	A more controlled mode of shell execution.
+* Bash POSIX Mode::		Making Bash behave more closely to what
+				the POSIX standard specifies.
+* Shell Compatibility Mode::	How Bash supports behavior that was present
+				in earlier versions and has changed.
+@end menu
+
+@node Invoking Bash
+@section Invoking Bash
+
+@example
+bash [long-opt] [-ir] [-abefhkmnptuvxdBCDHP] [-o @var{option}]
+    [-O @var{shopt_option}] [@var{argument} @dots{}]
+bash [long-opt] [-abefhkmnptuvxdBCDHP] [-o @var{option}]
+    [-O @var{shopt_option}] -c @var{string} [@var{argument} @dots{}]
+bash [long-opt] -s [-abefhkmnptuvxdBCDHP] [-o @var{option}]
+    [-O @var{shopt_option}] [@var{argument} @dots{}]
+@end example
+
+All of the single-character options used with the @code{set} builtin
+(@pxref{The Set Builtin}) can be used as options when the shell is invoked.
+In addition, there are several multi-character
+options that you can use.  These options must appear on the command
+line before the single-character options to be recognized. 
+
+@table @code
+@item --debugger
+Arrange for the debugger profile to be executed before the shell
+starts.  Turns on extended debugging mode (see @ref{The Shopt Builtin}
+for a description of the @code{extdebug} option to the @code{shopt}
+builtin).
+
+@item --dump-po-strings
+A list of all double-quoted strings preceded by @samp{$}
+is printed on the standard output
+in the @sc{gnu} @code{gettext} PO (portable object) file format.
+Equivalent to @option{-D} except for the output format.
+
+@item --dump-strings
+Equivalent to @option{-D}.
+
+@item --help
+Display a usage message on standard output and exit successfully.
+
+@item --init-file @var{filename}
+@itemx --rcfile @var{filename}
+Execute commands from @var{filename} (instead of @file{~/.bashrc})
+in an interactive shell.
+
+@item --login
+Equivalent to @option{-l}.
+
+@item --noediting
+Do not use the @sc{gnu} Readline library (@pxref{Command Line Editing})
+to read  command lines when the shell is interactive.
+
+@item --noprofile
+Don't load the system-wide startup file @file{/etc/profile}
+or any of the personal initialization files
+@file{~/.bash_profile}, @file{~/.bash_login}, or @file{~/.profile}
+when Bash is invoked as a login shell.
+
+@item --norc
+Don't read the @file{~/.bashrc} initialization file in an
+interactive shell.  This is on by default if the shell is
+invoked as @code{sh}.
+
+@item --posix
+Change the behavior of Bash where the default operation differs
+from the @sc{posix} standard to match the standard.  This
+is intended to make Bash behave as a strict superset of that
+standard.  @xref{Bash POSIX Mode}, for a description of the Bash
+@sc{posix} mode.
+
+@item --restricted
+Make the shell a restricted shell (@pxref{The Restricted Shell}).
+
+@item --verbose
+Equivalent to @option{-v}.  Print shell input lines as they're read.
+
+@item --version
+Show version information for this instance of
+Bash on the standard output and exit successfully.
+@end table
+
+There are several single-character options that may be supplied at
+invocation which are not available with the @code{set} builtin.
+
+@table @code
+@item -c
+Read and execute commands from the first non-option argument
+@var{command_string}, then exit. 
+If there are arguments after the @var{command_string},
+the first argument is assigned to @code{$0}
+and any remaining arguments are assigned to the positional parameters.
+The assignment to @code{$0} sets the name of the shell, which is used
+in warning and error messages.
+
+@item -i
+Force the shell to run interactively.  Interactive shells are
+described in @ref{Interactive Shells}.
+
+@item -l
+Make this shell act as if it had been directly invoked by login.
+When the shell is interactive, this is equivalent to starting a
+login shell with @samp{exec -l bash}.
+When the shell is not interactive, the login shell startup files will
+be executed.
+@samp{exec bash -l} or @samp{exec bash --login}
+will replace the current shell with a Bash login shell.
+@xref{Bash Startup Files}, for a description of the special behavior
+of a login shell.
+
+@item -r
+Make the shell a restricted shell (@pxref{The Restricted Shell}).
+
+@item -s
+If this option is present, or if no arguments remain after option
+processing, then commands are read from the standard input.
+This option allows the positional parameters to be set
+when invoking an interactive shell or when reading input
+through a pipe.
+
+@item -D
+A list of all double-quoted strings preceded by @samp{$}
+is printed on the standard output.
+These are the strings that
+are subject to language translation when the current locale
+is not @code{C} or @code{POSIX} (@pxref{Locale Translation}).
+This implies the @option{-n} option; no commands will be executed.
+
+@item [-+]O [@var{shopt_option}]
+@var{shopt_option} is one of the shell options accepted by the
+@code{shopt} builtin (@pxref{The Shopt Builtin}).
+If @var{shopt_option} is present, @option{-O} sets the value of that option;
+@option{+O} unsets it.  
+If @var{shopt_option} is not supplied, the names and values of the shell
+options accepted by @code{shopt} are printed on the standard output.
+If the invocation option is @option{+O}, the output is displayed in a format
+that may be reused as input.
+
+@item --
+A @code{--} signals the end of options and disables further option
+processing.
+Any arguments after the @code{--} are treated as filenames and arguments.
+@end table
+
+@cindex login shell
+A @emph{login} shell is one whose first character of argument zero is
+@samp{-}, or one invoked with the @option{--login} option.
+
+@cindex interactive shell
+An @emph{interactive} shell is one started without non-option arguments,
+unless @option{-s} is specified,
+without specifying the @option{-c} option, and whose input and output are both
+connected to terminals (as determined by @code{isatty(3)}), or one
+started with the @option{-i} option.  @xref{Interactive Shells}, for more
+information.
+
+If arguments remain after option processing, and neither the
+@option{-c} nor the @option{-s}
+option has been supplied, the first argument is assumed to
+be the name of a file containing shell commands (@pxref{Shell Scripts}).
+When Bash is invoked in this fashion, @code{$0}
+is set to the name of the file, and the positional parameters
+are set to the remaining arguments.
+Bash reads and executes commands from this file, then exits.   
+Bash's exit status is the exit status of the last command executed
+in the script.  If no commands are executed, the exit status is 0.
+
+@node Bash Startup Files
+@section Bash Startup Files
+@cindex startup files
+
+This section describes how Bash executes its startup files.
+If any of the files exist but cannot be read, Bash reports an error.
+Tildes are expanded in filenames as described above under
+Tilde Expansion (@pxref{Tilde Expansion}).
+
+Interactive shells are described in @ref{Interactive Shells}.
+
+@subsubheading Invoked as an interactive login shell, or with @option{--login}
+
+When Bash is invoked as an interactive login shell, or as a
+non-interactive shell with the @option{--login} option, it first reads and
+executes commands from the file @file{/etc/profile}, if that file exists.
+After reading that file, it looks for @file{~/.bash_profile},
+@file{~/.bash_login}, and @file{~/.profile}, in that order, and reads
+and executes commands from the first one that exists and is readable.
+The @option{--noprofile} option may be used when the shell is started to
+inhibit this behavior.
+
+When an interactive login shell exits,
+or a non-interactive login shell executes the @code{exit} builtin command,
+Bash reads and executes commands from
+the file @file{~/.bash_logout}, if it exists.
+
+@subsubheading Invoked as an interactive non-login shell
+
+When an interactive shell that is not a login shell is started, Bash
+reads and executes commands from @file{~/.bashrc}, if that file exists.
+This may be inhibited by using the @option{--norc} option.
+The @option{--rcfile @var{file}} option will force Bash to read and
+execute commands from @var{file} instead of @file{~/.bashrc}.
+
+So, typically, your @file{~/.bash_profile} contains the line
+@example
+@code{if [ -f ~/.bashrc ]; then . ~/.bashrc; fi}
+@end example
+@noindent
+after (or before) any login-specific initializations.
+
+@subsubheading Invoked non-interactively
+
+When Bash is started non-interactively, to run a shell script,
+for example, it looks for the variable @env{BASH_ENV} in the environment,
+expands its value if it appears there, and uses the expanded value as
+the name of a file to read and execute.  Bash behaves as if the
+following command were executed:
+@example
+@code{if [ -n "$BASH_ENV" ]; then . "$BASH_ENV"; fi}
+@end example
+@noindent
+but the value of the @env{PATH} variable is not used to search for the
+filename.
+
+As noted above, if a non-interactive shell is invoked with the
+@option{--login} option, Bash attempts to read and execute commands from the
+login shell startup files. 
+
+@subsubheading Invoked with name @code{sh}
+
+If Bash is invoked with the name @code{sh}, it tries to mimic the
+startup behavior of historical versions of @code{sh} as closely as
+possible, while conforming to the @sc{posix} standard as well.
+
+When invoked as an interactive login shell, or as a non-interactive
+shell with the @option{--login} option, it first attempts to read
+and execute commands from @file{/etc/profile} and @file{~/.profile}, in
+that order.
+The @option{--noprofile} option may be used to inhibit this behavior.
+When invoked as an interactive shell with the name @code{sh}, Bash
+looks for the variable @env{ENV}, expands its value if it is defined,
+and uses the expanded value as the name of a file to read and execute.
+Since a shell invoked as @code{sh} does not attempt to read and execute
+commands from any other startup files, the @option{--rcfile} option has
+no effect.
+A non-interactive shell invoked with the name @code{sh} does not attempt
+to read any other startup files.
+
+When invoked as @code{sh}, Bash enters @sc{posix} mode after
+the startup files are read.
+
+@subsubheading Invoked in @sc{posix} mode
+
+When Bash is started in @sc{posix} mode, as with the
+@option{--posix} command line option, it follows the @sc{posix} standard
+for startup files.
+In this mode, interactive shells expand the @env{ENV} variable
+and commands are read and executed from the file whose name is the
+expanded value.
+No other startup files are read.
+
+@subsubheading Invoked by remote shell daemon
+
+Bash attempts to determine when it is being run with its standard input
+connected to a network connection, as when executed by the remote shell
+daemon, usually @code{rshd}, or the secure shell daemon @code{sshd}.
+If Bash determines it is being run in
+this fashion, it reads and executes commands from @file{~/.bashrc}, if that
+file exists and is readable.
+It will not do this if invoked as @code{sh}.
+The @option{--norc} option may be used to inhibit this behavior, and the
+@option{--rcfile} option may be used to force another file to be read, but
+neither @code{rshd} nor @code{sshd} generally invoke the shell with those
+options or allow them to be specified.
+
+@subsubheading Invoked with unequal effective and real @sc{uid/gid}s
+
+If Bash is started with the effective user (group) id not equal to the
+real user (group) id, and the @option{-p} option is not supplied, no startup
+files are read, shell functions are not inherited from the environment,
+the @env{SHELLOPTS}, @env{BASHOPTS}, @env{CDPATH}, and @env{GLOBIGNORE}
+variables, if they appear in the environment, are ignored, and the effective
+user id is set to the real user id.
+If the @option{-p} option is supplied at invocation, the startup behavior is
+the same, but the effective user id is not reset.
+
+@node Interactive Shells
+@section Interactive Shells
+@cindex interactive shell
+@cindex shell, interactive
+
+@menu
+* What is an Interactive Shell?::	What determines whether a shell is Interactive.
+* Is this Shell Interactive?::	How to tell if a shell is interactive.
+* Interactive Shell Behavior::	What changes in a interactive shell?
+@end menu
+
+@node What is an Interactive Shell?
+@subsection What is an Interactive Shell?
+
+An interactive shell
+is one started without non-option arguments, unless @option{-s} is
+specified, without specifying the @option{-c} option, and
+whose input and error output are both
+connected to terminals (as determined by @code{isatty(3)}),
+or one started with the @option{-i} option.
+
+An interactive shell generally reads from and writes to a user's
+terminal.
+
+The @option{-s} invocation option may be used to set the positional parameters
+when an interactive shell is started.
+
+@node Is this Shell Interactive?
+@subsection Is this Shell Interactive?
+
+To determine within a startup script whether or not Bash is
+running interactively,
+test the value of the @samp{-} special parameter.
+It contains @code{i} when the shell is interactive.  For example:
+
+@example
+case "$-" in
+*i*)	echo This shell is interactive ;;
+*)	echo This shell is not interactive ;;
+esac
+@end example
+
+Alternatively, startup scripts may examine the variable
+@env{PS1}; it is unset in non-interactive shells, and set in
+interactive shells.  Thus:
+
+@example
+if [ -z "$PS1" ]; then
+        echo This shell is not interactive
+else
+        echo This shell is interactive
+fi
+@end example
+
+@node Interactive Shell Behavior
+@subsection Interactive Shell Behavior
+
+When the shell is running interactively, it changes its behavior in
+several ways.
+
+@enumerate
+@item
+Startup files are read and executed as described in @ref{Bash Startup Files}.
+
+@item
+Job Control (@pxref{Job Control}) is enabled by default.  When job
+control is in effect, Bash ignores the keyboard-generated job control
+signals @code{SIGTTIN}, @code{SIGTTOU}, and @code{SIGTSTP}.
+
+@item
+Bash expands and displays @env{PS1} before reading the first line
+of a command, and expands and displays @env{PS2} before reading the
+second and subsequent lines of a multi-line command.
+Bash expands and displays @env{PS0} after it reads a command but before
+executing it.
+See @ref{Controlling the Prompt}, for a complete list of prompt
+string escape sequences.
+
+@item
+Bash executes the values of the set elements of the @env{PROMPT_COMMANDS}
+array variable as commands before printing the primary prompt, @env{$PS1}
+(@pxref{Bash Variables}).
+
+@item
+Readline (@pxref{Command Line Editing}) is used to read commands from
+the user's terminal.
+
+@item
+Bash inspects the value of the @code{ignoreeof} option to @code{set -o}
+instead of exiting immediately when it receives an @code{EOF} on its
+standard input when reading a command (@pxref{The Set Builtin}).
+
+@item
+Command history (@pxref{Bash History Facilities})
+and history expansion (@pxref{History Interaction})
+are enabled by default.
+Bash will save the command history to the file named by @env{$HISTFILE}
+when a shell with history enabled exits.
+
+@item
+Alias expansion (@pxref{Aliases}) is performed by default.
+
+@item
+In the absence of any traps, Bash ignores @code{SIGTERM}
+(@pxref{Signals}).
+
+@item
+In the absence of any traps, @code{SIGINT} is caught and handled
+(@pxref{Signals}).
+@code{SIGINT} will interrupt some shell builtins.
+
+@item
+An interactive login shell sends a @code{SIGHUP} to all jobs on exit
+if the @code{huponexit} shell option has been enabled (@pxref{Signals}).
+
+@item
+The @option{-n} invocation option is ignored, and @samp{set -n} has
+no effect (@pxref{The Set Builtin}).
+
+@item
+Bash will check for mail periodically, depending on the values of the
+@env{MAIL}, @env{MAILPATH}, and @env{MAILCHECK} shell variables
+(@pxref{Bash Variables}).
+
+@item
+Expansion errors due to references to unbound shell variables after
+@samp{set -u} has been enabled will not cause the shell to exit
+(@pxref{The Set Builtin}).
+
+@item
+The shell will not exit on expansion errors caused by @var{var} being unset
+or null in @code{$@{@var{var}:?@var{word}@}} expansions
+(@pxref{Shell Parameter Expansion}).
+
+@item
+Redirection errors encountered by shell builtins will not cause the
+shell to exit.
+
+@item
+When running in @sc{posix} mode, a special builtin returning an error
+status will not cause the shell to exit (@pxref{Bash POSIX Mode}).
+
+@item
+A failed @code{exec} will not cause the shell to exit
+(@pxref{Bourne Shell Builtins}).
+
+@item
+Parser syntax errors will not cause the shell to exit.
+
+@item
+Simple spelling correction for directory arguments to the @code{cd}
+builtin is enabled by default (see the description of the @code{cdspell}
+option to the @code{shopt} builtin in @ref{The Shopt Builtin}).
+
+@item
+The shell will check the value of the @env{TMOUT} variable and exit
+if a command is not read within the specified number of seconds after
+printing @env{$PS1} (@pxref{Bash Variables}).
+
+@end enumerate
+
+@node Bash Conditional Expressions
+@section Bash Conditional Expressions
+@cindex expressions, conditional
+
+Conditional expressions are used by the @code{[[} compound command
+and the @code{test} and @code{[} builtin commands. The @code{test}
+and @code{[} commands determine their behavior based on the number
+of arguments; see the descriptions of those commands for any other
+command-specific actions.
+
+Expressions may be unary or binary,
+and are formed from the following primaries.
+Unary expressions are often used to examine the status of a file.
+There are string operators and numeric comparison operators as well.
+Bash handles several filenames specially when they are used in
+expressions.
+If the operating system on which Bash is running provides these
+special files, Bash will use them; otherwise it will emulate them
+internally with this behavior:
+If the @var{file} argument to one of the primaries is of the form
+@file{/dev/fd/@var{N}}, then file descriptor @var{N} is checked.
+If the @var{file} argument to one of the primaries is one of
+@file{/dev/stdin}, @file{/dev/stdout}, or @file{/dev/stderr}, file
+descriptor 0, 1, or 2, respectively, is checked.
+
+When used with @code{[[}, the @samp{<} and @samp{>} operators sort
+lexicographically using the current locale.
+The @code{test} command uses ASCII ordering.
+
+Unless otherwise specified, primaries that operate on files follow symbolic
+links and operate on the target of the link, rather than the link itself.
+
+@table @code
+@item -a @var{file}
+True if @var{file} exists.
+
+@item -b @var{file}
+True if @var{file} exists and is a block special file.
+
+@item -c @var{file}
+True if @var{file} exists and is a character special file.
+
+@item -d @var{file}
+True if @var{file} exists and is a directory.
+
+@item -e @var{file}
+True if @var{file} exists.
+
+@item -f @var{file}
+True if @var{file} exists and is a regular file.
+
+@item -g @var{file}
+True if @var{file} exists and its set-group-id bit is set.
+
+@item -h @var{file}
+True if @var{file} exists and is a symbolic link.
+
+@item -k @var{file}
+True if @var{file} exists and its "sticky" bit is set.
+
+@item -p @var{file}
+True if @var{file} exists and is a named pipe (FIFO).
+
+@item -r @var{file}
+True if @var{file} exists and is readable.
+
+@item -s @var{file}
+True if @var{file} exists and has a size greater than zero.
+
+@item -t @var{fd}
+True if file descriptor @var{fd} is open and refers to a terminal.
+
+@item -u @var{file}
+True if @var{file} exists and its set-user-id bit is set.
+
+@item -w @var{file}
+True if @var{file} exists and is writable.
+
+@item -x @var{file}
+True if @var{file} exists and is executable.
+
+@item -G @var{file}
+True if @var{file} exists and is owned by the effective group id.
+
+@item -L @var{file}
+True if @var{file} exists and is a symbolic link.
+
+@item -N @var{file}
+True if @var{file} exists and has been modified since it was last read.
+
+@item -O @var{file}
+True if @var{file} exists and is owned by the effective user id.
+
+@item -S @var{file}
+True if @var{file} exists and is a socket.
+
+@item @var{file1} -ef @var{file2}
+True if @var{file1} and @var{file2} refer to the same device and
+inode numbers.
+
+@item @var{file1} -nt @var{file2}
+True if @var{file1} is newer (according to modification date)
+than @var{file2}, or if @var{file1} exists and @var{file2} does not.
+
+@item @var{file1} -ot @var{file2}
+True if @var{file1} is older than @var{file2},
+or if @var{file2} exists and @var{file1} does not.
+
+@item -o @var{optname}
+True if the shell option @var{optname} is enabled.
+The list of options appears in the description of the @option{-o}
+option to the @code{set} builtin (@pxref{The Set Builtin}).
+
+@item -v @var{varname}
+True if the shell variable @var{varname} is set (has been assigned a value).
+
+@item -R @var{varname}
+True if the shell variable @var{varname} is set and is a name reference.
+
+@item -z @var{string}
+True if the length of @var{string} is zero.
+
+@item -n @var{string}
+@itemx @var{string}
+True if the length of @var{string} is non-zero.
+
+@item @var{string1} == @var{string2}
+@itemx @var{string1} = @var{string2}
+True if the strings are equal.
+When used with the @code{[[} command, this performs pattern matching as
+described above (@pxref{Conditional Constructs}).
+
+@samp{=} should be used with the @code{test} command for @sc{posix} conformance.
+
+@item @var{string1} != @var{string2}
+True if the strings are not equal.
+
+@item @var{string1} < @var{string2}
+True if @var{string1} sorts before @var{string2} lexicographically.
+
+@item @var{string1} > @var{string2}
+True if @var{string1} sorts after @var{string2} lexicographically.
+
+@item @var{arg1} OP @var{arg2}
+@code{OP} is one of 
+@samp{-eq}, @samp{-ne}, @samp{-lt}, @samp{-le}, @samp{-gt}, or @samp{-ge}.
+These arithmetic binary operators return true if @var{arg1}
+is equal to, not equal to, less than, less than or equal to,
+greater than, or greater than or equal to @var{arg2},
+respectively.  @var{Arg1} and @var{arg2}
+may be positive or negative integers.
+When used with the @code{[[} command, @var{Arg1} and @var{Arg2}
+are evaluated as arithmetic expressions (@pxref{Shell Arithmetic}).
+@end table
+
+@node Shell Arithmetic
+@section Shell Arithmetic
+@cindex arithmetic, shell
+@cindex shell arithmetic
+@cindex expressions, arithmetic
+@cindex evaluation, arithmetic
+@cindex arithmetic evaluation
+
+The shell allows arithmetic expressions to be evaluated, as one of
+the shell expansions or by using the @code{((} compound command, the
+@code{let} builtin, or the @option{-i} option to the @code{declare} builtin.
+
+Evaluation is done in fixed-width integers with no check for overflow,
+though division by 0 is trapped and flagged as an error.
+The operators and their precedence, associativity, and values
+are the same as in the C language.
+The following list of operators is grouped into levels of
+equal-precedence operators.
+The levels are listed in order of decreasing precedence. 
+
+@table @code
+
+@item @var{id}++ @var{id}--
+variable post-increment and post-decrement 
+
+@item ++@var{id} --@var{id}
+variable pre-increment and pre-decrement
+
+@item - +
+unary minus and plus
+
+@item ! ~
+logical and bitwise negation
+
+@item **
+exponentiation
+
+@item * / %
+multiplication, division, remainder
+
+@item + -
+addition, subtraction
+
+@item << >>
+left and right bitwise shifts
+
+@item <= >= < >
+comparison
+
+@item == !=
+equality and inequality
+
+@item &
+bitwise AND
+
+@item ^
+bitwise exclusive OR
+
+@item |
+bitwise OR
+
+@item &&
+logical AND
+
+@item ||
+logical OR
+
+@item expr ? expr : expr
+conditional operator
+
+@item = *= /= %= += -= <<= >>= &= ^= |=
+assignment
+
+@item expr1 , expr2
+comma
+@end table
+
+Shell variables are allowed as operands; parameter expansion is
+performed before the expression is evaluated. 
+Within an expression, shell variables may also be referenced by name
+without using the parameter expansion syntax.
+A shell variable that is null or unset evaluates to 0 when referenced
+by name without using the parameter expansion syntax.
+The value of a variable is evaluated as an arithmetic expression
+when it is referenced, or when a variable which has been given the  
+@var{integer} attribute using @samp{declare -i} is assigned a value.
+A null value evaluates to 0.
+A shell variable need not have its @var{integer} attribute turned on
+to be used in an expression.
+
+Integer constants follow the C language definition, without suffixes or
+character constants.
+Constants with a leading 0 are interpreted as octal numbers.
+A leading @samp{0x} or @samp{0X} denotes hexadecimal.  Otherwise,
+numbers take the form [@var{base}@code{#}]@var{n}, where the optional @var{base}
+is a decimal number between 2 and 64 representing the arithmetic
+base, and @var{n} is a number in that base.
+If @var{base}@code{#} is omitted, then base 10 is used.
+When specifying @var{n},
+if a non-digit is required,
+the digits greater than 9 are represented by the lowercase letters,
+the uppercase letters, @samp{@@}, and @samp{_}, in that order.
+If @var{base} is less than or equal to 36, lowercase and uppercase
+letters may be used interchangeably to represent numbers between 10
+and 35.
+
+Operators are evaluated in order of precedence.  Sub-expressions in
+parentheses are evaluated first and may override the precedence
+rules above.
+
+@node Aliases
+@section Aliases
+@cindex alias expansion
+
+@var{Aliases} allow a string to be substituted for a word when it is used
+as the first word of a simple command.
+The shell maintains a list of aliases that may be set and unset with
+the @code{alias} and @code{unalias} builtin commands.
+
+The first word of each simple command, if unquoted, is checked to see
+if it has an alias.
+If so, that word is replaced by the text of the alias.
+The characters @samp{/}, @samp{$}, @samp{`}, @samp{=} and any of the
+shell metacharacters or quoting characters listed above may not appear
+in an alias name.
+The replacement text may contain any valid
+shell input, including shell metacharacters.
+The first word of the replacement text is tested for
+aliases, but a word that is identical to an alias being expanded
+is not expanded a second time.
+This means that one may alias @code{ls} to @code{"ls -F"},
+for instance, and Bash does not try to recursively expand the
+replacement text.
+If the last character of the alias value is a
+@var{blank}, then the next command word following the
+alias is also checked for alias expansion.
+
+Aliases are created and listed with the @code{alias}
+command, and removed with the @code{unalias} command.
+
+There is no mechanism for using arguments in the replacement text,
+as in @code{csh}.
+If arguments are needed, a shell function should be used
+(@pxref{Shell Functions}).
+
+Aliases are not expanded when the shell is not interactive,
+unless the @code{expand_aliases} shell option is set using
+@code{shopt} (@pxref{The Shopt Builtin}).
+
+The rules concerning the definition and use of aliases are
+somewhat confusing. Bash
+always reads at least one complete line of input,
+and all lines that make up a compound command,
+before executing any of the commands on that line or the compound command.
+Aliases are expanded when a
+command is read, not when it is executed.  Therefore, an
+alias definition appearing on the same line as another
+command does not take effect until the next line of input is read.
+The commands following the alias definition
+on that line are not affected by the new alias.
+This behavior is also an issue when functions are executed.
+Aliases are expanded when a function definition is read,
+not when the function is executed, because a function definition
+is itself a command.  As a consequence, aliases
+defined in a function are not available until after that
+function is executed.  To be safe, always put
+alias definitions on a separate line, and do not use @code{alias}
+in compound commands.
+
+For almost every purpose, shell functions are preferred over aliases.
+
+@node Arrays
+@section Arrays
+@cindex arrays
+
+Bash provides one-dimensional indexed and associative array variables.
+Any variable may be used as an indexed array;
+the @code{declare} builtin will explicitly declare an array.
+There is no maximum
+limit on the size of an array, nor any requirement that members
+be indexed or assigned contiguously.
+Indexed arrays are referenced using integers (including arithmetic
+expressions (@pxref{Shell Arithmetic})) and are zero-based;
+associative arrays use arbitrary strings.
+Unless otherwise noted, indexed array indices must be non-negative integers.
+
+An indexed array is created automatically if any variable is assigned to
+using the syntax
+@example
+@var{name}[@var{subscript}]=@var{value}
+@end example
+
+@noindent
+The @var{subscript}
+is treated as an arithmetic expression that must evaluate to a number.
+To explicitly declare an array, use
+@example
+declare -a @var{name}
+@end example
+@noindent
+The syntax
+@example
+declare -a @var{name}[@var{subscript}]
+@end example
+@noindent
+is also accepted; the @var{subscript} is ignored.
+
+@noindent
+Associative arrays are created using
+@example
+declare -A @var{name}
+@end example
+
+Attributes may be
+specified for an array variable using the @code{declare} and
+@code{readonly} builtins.  Each attribute applies to all members of
+an array.
+
+Arrays are assigned to using compound assignments of the form
+@example
+@var{name}=(@var{value1} @var{value2} @dots{} )
+@end example
+@noindent
+where each
+@var{value} may be of the form @code{[@var{subscript}]=}@var{string}.
+Indexed array assignments do not require anything but @var{string}.
+When assigning to indexed arrays, if
+the optional subscript is supplied, that index is assigned to;
+otherwise the index of the element assigned is the last index assigned
+to by the statement plus one.  Indexing starts at zero.
+
+Each @var{value} in the list undergoes all the shell expansions
+described above (@pxref{Shell Expansions}).
+
+When assigning to an associative array, the words in a compound assignment
+may be either assignment statements, for which the subscript is required,
+or a list of words that is interpreted as a sequence of alternating keys
+and values:
+@var{name}=(@var{key1} @var{value1} @var{key2} @var{value2} @dots{} ).
+These are treated identically to
+@var{name}=( [@var{key1}]=@var{value1} [@var{key2}]=@var{value2} @dots{} ).
+The first word in the list determines how the remaining words
+are interpreted; all assignments in a list must be of the same type.
+When using key/value pairs, the keys may not be missing or empty;
+a final missing value is treated like the empty string.
+
+This syntax is also accepted by the @code{declare}
+builtin.  Individual array elements may be assigned to using the
+@code{@var{name}[@var{subscript}]=@var{value}} syntax introduced above.
+
+When assigning to an indexed array, if @var{name}
+is subscripted by a negative number, that number is
+interpreted as relative to one greater than the maximum index of
+@var{name}, so negative indices count back from the end of the
+array, and an index of -1 references the last element.
+
+Any element of an array may be referenced using
+@code{$@{@var{name}[@var{subscript}]@}}.
+The braces are required to avoid
+conflicts with the shell's filename expansion operators.  If the
+@var{subscript} is @samp{@@} or @samp{*}, the word expands to all members
+of the array @var{name}.  These subscripts differ only when the word
+appears within double quotes.
+If the word is double-quoted,
+@code{$@{@var{name}[*]@}} expands to a single word with
+the value of each array member separated by the first character of the
+@env{IFS} variable, and @code{$@{@var{name}[@@]@}} expands each element of
+@var{name} to a separate word.  When there are no array members,
+@code{$@{@var{name}[@@]@}} expands to nothing.
+If the double-quoted expansion occurs within a word, the expansion of
+the first parameter is joined with the beginning part of the original
+word, and the expansion of the last parameter is joined with the last
+part of the original word.
+This is analogous to the
+expansion of the special parameters @samp{@@} and @samp{*}. 
+@code{$@{#@var{name}[@var{subscript}]@}} expands to the length of
+@code{$@{@var{name}[@var{subscript}]@}}.
+If @var{subscript} is @samp{@@} or
+@samp{*}, the expansion is the number of elements in the array. 
+If the @var{subscript}
+used to reference an element of an indexed array
+evaluates to a number less than zero, it is
+interpreted as relative to one greater than the maximum index of the array,
+so negative indices count back from the end of the array,
+and an index of -1 refers to the last element.
+
+Referencing an array variable without a subscript is equivalent to
+referencing with a subscript of 0.
+Any reference to a variable using a valid subscript is legal, and
+@code{bash} will create an array if necessary.
+
+An array variable is considered set if a subscript has been assigned a
+value.  The null string is a valid value.
+
+It is possible to obtain the keys (indices) of an array as well as the values.
+$@{!@var{name}[@@]@} and $@{!@var{name}[*]@} expand to the indices
+assigned in array variable @var{name}.
+The treatment when in double quotes is similar to the expansion of the
+special parameters @samp{@@} and @samp{*} within double quotes.
+
+The @code{unset} builtin is used to destroy arrays.
+@code{unset @var{name}[@var{subscript}]}
+destroys the array element at index @var{subscript}.
+Negative subscripts to indexed arrays are interpreted as described above.
+Unsetting the last element of an array variable does not unset the variable.
+@code{unset @var{name}}, where @var{name} is an array, removes the
+entire array.  A subscript of @samp{*} or @samp{@@} also removes the
+entire array.
+
+When using a variable name with a subscript as an argument to a command,
+such as with @code{unset}, without using the word expansion syntax
+described above, the argument is subject to the shell's filename expansion.
+If filename expansion is not desired, the argument should be quoted.
+
+The @code{declare}, @code{local}, and @code{readonly}
+builtins each accept a @option{-a} option to specify an indexed
+array and a @option{-A} option to specify an associative array.
+If both options are supplied, @option{-A} takes precedence.
+The @code{read} builtin accepts a @option{-a}
+option to assign a list of words read from the standard input
+to an array, and can read values from the standard input into
+individual array elements.  The @code{set} and @code{declare}
+builtins display array values in a way that allows them to be
+reused as input.
+
+@node The Directory Stack
+@section The Directory Stack
+@cindex directory stack
+
+@menu
+* Directory Stack Builtins::		Bash builtin commands to manipulate
+					the directory stack.
+@end menu
+
+The directory stack is a list of recently-visited directories.  The
+@code{pushd} builtin adds directories to the stack as it changes
+the current directory, and the @code{popd} builtin removes specified
+directories from the stack and changes the current directory to
+the directory removed.  The @code{dirs} builtin displays the contents
+of the directory stack.  The current directory is always the "top"
+of the directory stack.
+
+The contents of the directory stack are also visible
+as the value of the @env{DIRSTACK} shell variable.
+
+@node Directory Stack Builtins
+@subsection Directory Stack Builtins
+
+@table @code
+
+@item dirs
+@btindex dirs
+@example
+dirs [-clpv] [+@var{N} | -@var{N}]
+@end example
+
+Display the list of currently remembered directories.  Directories
+are added to the list with the @code{pushd} command; the
+@code{popd} command removes directories from the list.
+The current directory is always the first directory in the stack.
+
+@table @code
+@item -c
+Clears the directory stack by deleting all of the elements.
+@item -l
+Produces a listing using full pathnames;
+the default listing format uses a tilde to denote the home directory.
+@item -p
+Causes @code{dirs} to print the directory stack with one entry per
+line.
+@item -v
+Causes @code{dirs} to print the directory stack with one entry per
+line, prefixing each entry with its index in the stack.
+@item +@var{N}
+Displays the @var{N}th directory (counting from the left of the
+list printed by @code{dirs} when invoked without options), starting
+with zero.
+@item -@var{N}
+Displays the @var{N}th directory (counting from the right of the
+list printed by @code{dirs} when invoked without options), starting
+with zero.
+@end table
+
+@item popd
+@btindex popd
+@example
+popd [-n] [+@var{N} | -@var{N}]
+@end example
+
+When no arguments are given, @code{popd}
+removes the top directory from the stack and
+performs a @code{cd} to the new top directory.
+The elements are numbered from 0 starting at the first directory
+listed with @code{dirs}; that is, @code{popd} is equivalent to @code{popd +0}.
+
+@table @code
+@item -n
+Suppresses the normal change of directory when removing directories
+from the stack, so that only the stack is manipulated.
+@item +@var{N}
+Removes the @var{N}th directory (counting from the left of the
+list printed by @code{dirs}), starting with zero.
+@item -@var{N}
+Removes the @var{N}th directory (counting from the right of the
+list printed by @code{dirs}), starting with zero.
+@end table
+
+@btindex pushd
+@item pushd
+@example
+pushd [-n] [@var{+N} | @var{-N} | @var{dir}]
+@end example
+
+Save the current directory on the top of the directory stack
+and then @code{cd} to @var{dir}.
+With no arguments, @code{pushd} exchanges the top two directories
+and makes the new top the current directory.
+
+@table @code
+@item -n
+Suppresses the normal change of directory when rotating or
+adding directories to the stack, so that only the stack is manipulated.
+@item +@var{N}
+Brings the @var{N}th directory (counting from the left of the
+list printed by @code{dirs}, starting with zero) to the top of
+the list by rotating the stack.
+@item -@var{N}
+Brings the @var{N}th directory (counting from the right of the
+list printed by @code{dirs}, starting with zero) to the top of
+the list by rotating the stack.
+@item @var{dir}
+Makes @var{dir} be the top of the stack, making
+it the new current directory as if it had been supplied as an argument
+to the @code{cd} builtin.
+@end table
+@end table
+
+@node Controlling the Prompt
+@section Controlling the Prompt
+@cindex prompting
+
+Bash examines the value of the array variable @env{PROMPT_COMMANDS} just before
+printing each primary prompt.
+If any elements in  @env{PROMPT_COMMANDS} are set and non-null, Bash
+executes each value, in numeric order,
+just as if it had been typed on the command line.
+
+In addition, the following table describes the special characters which
+can appear in the prompt variables @env{PS0}, @env{PS1}, @env{PS2}, and
+@env{PS4}:
+
+@table @code
+@item \a
+A bell character.
+@item \d
+The date, in "Weekday Month Date" format (e.g., "Tue May 26").
+@item \D@{@var{format}@}
+The @var{format} is passed to @code{strftime}(3) and the result is inserted
+into the prompt string; an empty @var{format} results in a locale-specific
+time representation.  The braces are required.
+@item \e
+An escape character.
+@item \h
+The hostname, up to the first `.'.
+@item \H
+The hostname.
+@item \j
+The number of jobs currently managed by the shell.
+@item \l
+The basename of the shell's terminal device name.
+@item \n
+A newline.
+@item \r
+A carriage return.
+@item \s
+The name of the shell, the basename of @code{$0} (the portion
+following the final slash).
+@item \t
+The time, in 24-hour HH:MM:SS format.
+@item \T
+The time, in 12-hour HH:MM:SS format.
+@item \@@
+The time, in 12-hour am/pm format.
+@item \A
+The time, in 24-hour HH:MM format.
+@item \u
+The username of the current user.
+@item \v
+The version of Bash (e.g., 2.00)          
+@item \V
+The release of Bash, version + patchlevel (e.g., 2.00.0)
+@item \w
+The current working directory, with @env{$HOME} abbreviated with a tilde
+(uses the @env{$PROMPT_DIRTRIM} variable).
+@item \W
+The basename of @env{$PWD}, with @env{$HOME} abbreviated with a tilde.
+@item \!
+The history number of this command.
+@item \#
+The command number of this command.
+@item \$
+If the effective uid is 0, @code{#}, otherwise @code{$}.
+@item \@var{nnn}
+The character whose ASCII code is the octal value @var{nnn}.
+@item \\
+A backslash.
+@item \[
+Begin a sequence of non-printing characters.  This could be used to
+embed a terminal control sequence into the prompt.
+@item \]
+End a sequence of non-printing characters.
+@end table
+
+The command number and the history number are usually different:
+the history number of a command is its position in the history
+list, which may include commands restored from the history file
+(@pxref{Bash History Facilities}), while the command number is
+the position in the sequence of commands executed during the current
+shell session.
+
+After the string is decoded, it is expanded via
+parameter expansion, command substitution, arithmetic
+expansion, and quote removal, subject to the value of the
+@code{promptvars} shell option (@pxref{The Shopt Builtin}).
+This can have unwanted side effects if escaped portions of the string
+appear within command substitution or contain characters special to
+word expansion.
+
+@node The Restricted Shell
+@section The Restricted Shell
+@cindex restricted shell
+
+If Bash is started with the name @code{rbash}, or the
+@option{--restricted}
+or
+@option{-r}
+option is supplied at invocation, the shell becomes restricted.
+A restricted shell is used to
+set up an environment more controlled than the standard shell.
+A restricted shell behaves identically to @code{bash}
+with the exception that the following are disallowed or not performed:
+
+@itemize @bullet
+@item
+Changing directories with the @code{cd} builtin.
+@item
+Setting or unsetting the values of the @env{SHELL}, @env{PATH},
+@env{HISTFILE},
+@env{ENV}, or @env{BASH_ENV} variables.
+@item
+Specifying command names containing slashes.
+@item
+Specifying a filename containing a slash as an argument to the @code{.}
+builtin command.
+@item
+Specifying a filename containing a slash as an argument to the @code{history}
+builtin command.
+@item
+Specifying a filename containing a slash as an argument to the @option{-p}
+option to the @code{hash} builtin command.
+@item
+Importing function definitions from the shell environment at startup.
+@item
+Parsing the value of @env{SHELLOPTS} from the shell environment at startup.
+@item
+Redirecting output using the @samp{>}, @samp{>|}, @samp{<>}, @samp{>&},
+@samp{&>}, and @samp{>>} redirection operators.
+@item
+Using the @code{exec} builtin to replace the shell with another command.
+@item
+Adding or deleting builtin commands with the
+@option{-f} and @option{-d} options to the @code{enable} builtin.
+@item
+Using the @code{enable} builtin command to enable disabled shell builtins.
+@item
+Specifying the @option{-p} option to the @code{command} builtin.
+@item
+Turning off restricted mode with @samp{set +r} or @samp{set +o restricted}.
+@end itemize
+
+These restrictions are enforced after any startup files are read.
+
+When a command that is found to be a shell script is executed
+(@pxref{Shell Scripts}), @code{rbash} turns off any restrictions in
+the shell spawned to execute the script.
+
+The restricted shell mode is only one component of a useful restricted
+environment. It should be accompanied by setting @env{PATH} to a value
+that allows execution of only a few verified commands (commands that
+allow shell escapes are particularly vulnerable), leaving the user
+in a non-writable directory other than his home directory after login,
+not allowing the restricted shell to execute shell scripts, and cleaning
+the environment of variables that cause some commands to modify their
+behavior (e.g., @env{VISUAL} or @env{PAGER}).
+
+Modern systems provide more secure ways to implement a restricted environment,
+such as @code{jails}, @code{zones}, or @code{containers}.
+
+
+@node Bash POSIX Mode
+@section Bash POSIX Mode
+@cindex POSIX Mode
+
+Starting Bash with the @option{--posix} command-line option or executing
+@samp{set -o posix} while Bash is running will cause Bash to conform more
+closely to the @sc{posix} standard by changing the behavior to
+match that specified by @sc{posix} in areas where the Bash default differs.
+
+When invoked as @code{sh}, Bash enters @sc{posix} mode after reading the
+startup files.
+
+The following list is what's changed when `@sc{posix} mode' is in effect:
+
+@enumerate
+@item
+Bash ensures that the @env{POSIXLY_CORRECT} variable is set.
+
+@item
+When a command in the hash table no longer exists, Bash will re-search
+@env{$PATH} to find the new location.  This is also available with
+@samp{shopt -s checkhash}.
+
+@item
+Bash will not insert a command without the execute bit set into the
+command hash table, even if it returns it as a (last-ditch) result
+from a @env{$PATH} search.
+
+@item
+The message printed by the job control code and builtins when a job
+exits with a non-zero status is `Done(status)'.
+
+@item
+The message printed by the job control code and builtins when a job
+is stopped is `Stopped(@var{signame})', where @var{signame} is, for
+example, @code{SIGTSTP}.
+
+@item
+Alias expansion is always enabled, even in non-interactive shells.
+
+@item
+Reserved words appearing in a context where reserved words are recognized
+do not undergo alias expansion.
+
+@item
+The @sc{posix} @env{PS1} and @env{PS2} expansions of @samp{!} to
+the history number and @samp{!!} to @samp{!} are enabled,
+and parameter expansion is performed on the values of @env{PS1} and
+@env{PS2} regardless of the setting of the @code{promptvars} option.
+
+@item
+The @sc{posix} startup files are executed (@env{$ENV}) rather than
+the normal Bash files.
+
+@item
+Tilde expansion is only performed on assignments preceding a command
+name, rather than on all assignment statements on the line.
+
+@item
+The default history file is @file{~/.sh_history} (this is the
+default value of @env{$HISTFILE}).
+
+@item
+Redirection operators do not perform filename expansion on the word
+in the redirection unless the shell is interactive.
+
+@item
+Redirection operators do not perform word splitting on the word in the
+redirection.
+
+@item
+Function names must be valid shell @code{name}s.  That is, they may not
+contain characters other than letters, digits, and underscores, and
+may not start with a digit.  Declaring a function with an invalid name
+causes a fatal syntax error in non-interactive shells.
+
+@item
+Function names may not be the same as one of the @sc{posix} special
+builtins.
+
+@item
+@sc{posix} special builtins are found before shell functions
+during command lookup.
+
+@item
+When printing shell function definitions (e.g., by @code{type}), Bash does
+not print the @code{function} keyword.
+
+@item
+Literal tildes that appear as the first character in elements of
+the @env{PATH} variable are not expanded as described above
+under @ref{Tilde Expansion}.
+
+@item
+The @code{time} reserved word may be used by itself as a command.  When
+used in this way, it displays timing statistics for the shell and its
+completed children.  The @env{TIMEFORMAT} variable controls the format
+of the timing information.
+
+@item
+When parsing and expanding a $@{@dots{}@} expansion that appears within
+double quotes, single quotes are no longer special and cannot be used to
+quote a closing brace or other special character, unless the operator is
+one of those defined to perform pattern removal.  In this case, they do
+not have to appear as matched pairs.
+
+@item
+The parser does not recognize @code{time} as a reserved word if the next
+token begins with a @samp{-}.
+
+@ignore
+@item
+When parsing @code{$()} command substitutions containing here-documents,
+the parser does not allow a here-document to be delimited by the closing
+right parenthesis. The newline after the here-document delimiter is required.
+@end ignore
+
+@item
+The @samp{!} character does not introduce history expansion within a
+double-quoted string, even if the @code{histexpand} option is enabled.
+
+@item
+If a @sc{posix} special builtin returns an error status, a
+non-interactive shell exits.  The fatal errors are those listed in
+the @sc{posix} standard, and include things like passing incorrect options,
+redirection errors, variable assignment errors for assignments preceding
+the command name, and so on.
+
+@item
+A non-interactive shell exits with an error status if a variable
+assignment error occurs when no command name follows the assignment
+statements.
+A variable assignment error occurs, for example, when trying to assign
+a value to a readonly variable.
+
+@item
+A non-interactive shell exits with an error status if a variable
+assignment error occurs in an assignment statement preceding a special
+builtin, but not with any other simple command.
+
+@item
+A non-interactive shell exits with an error status if the iteration
+variable in a @code{for} statement or the selection variable in a
+@code{select} statement is a readonly variable.
+
+@item
+Non-interactive shells exit if @var{filename} in @code{.} @var{filename}
+is not found.
+
+@item
+Non-interactive shells exit if a syntax error in an arithmetic expansion
+results in an invalid expression.
+
+@item
+Non-interactive shells exit if a parameter expansion error occurs.
+
+@item
+Non-interactive shells exit if there is a syntax error in a script read
+with the @code{.} or @code{source} builtins, or in a string processed by
+the @code{eval} builtin.
+
+@item
+While variable indirection is available, it may not be applied to the
+@samp{#} and @samp{?} special parameters.
+
+@item
+When expanding the @samp{*} special parameter in a pattern context where the
+expansion is double-quoted does not treat the @code{$*} as if it were
+double-quoted.
+
+@item
+Assignment statements preceding @sc{posix} special builtins
+persist in the shell environment after the builtin completes.
+
+@item
+The @code{command} builtin does not prevent builtins that take assignment
+statements as arguments from expanding them as assignment statements;
+when not in @sc{posix} mode, assignment builtins lose their assignment
+statement expansion properties when preceded by @code{command}.
+
+@item
+The @code{bg} builtin uses the required format to describe each job placed
+in the background, which does not include an indication of whether the job
+is the current or previous job.
+
+@item
+The output of @samp{kill -l} prints all the signal names on a single line,
+separated by spaces, without the @samp{SIG} prefix.
+
+@item
+The @code{kill} builtin does not accept signal names with a @samp{SIG}
+prefix.
+
+@item
+The @code{export} and @code{readonly} builtin commands display their
+output in the format required by @sc{posix}.
+
+@item
+The @code{trap} builtin displays signal names without the leading
+@code{SIG}.
+
+@item
+The @code{trap} builtin doesn't check the first argument for a possible
+signal specification and revert the signal handling to the original
+disposition if it is, unless that argument consists solely of digits and
+is a valid signal number.  If users want to reset the handler for a given
+signal to the original disposition, they should use @samp{-} as the
+first argument.
+
+@item
+@code{trap -p} displays signals whose dispositions are set to SIG_DFL and
+those that were ignored when the shell started.
+
+@item
+The @code{.} and @code{source} builtins do not search the current directory
+for the filename argument if it is not found by searching @env{PATH}.
+
+@item
+Enabling @sc{posix} mode has the effect of setting the
+@code{inherit_errexit} option, so
+subshells spawned to execute command substitutions inherit the value of
+the @option{-e} option from the parent shell.
+When the @code{inherit_errexit} option is not enabled,
+Bash clears the @option{-e} option in such subshells.
+
+@item
+Enabling @sc{posix} mode has the effect of setting the
+@code{shift_verbose} option, so numeric arguments to @code{shift}
+that exceed the number of positional parameters will result in an
+error message.
+
+@item
+When the @code{alias} builtin displays alias definitions, it does not
+display them with a leading @samp{alias } unless the @option{-p} option
+is supplied.
+
+@item
+When the @code{set} builtin is invoked without options, it does not display
+shell function names and definitions.
+
+@item
+When the @code{set} builtin is invoked without options, it displays
+variable values without quotes, unless they contain shell metacharacters,
+even if the result contains nonprinting characters.
+
+@item
+When the @code{cd} builtin is invoked in @var{logical} mode, and the pathname
+constructed from @code{$PWD} and the directory name supplied as an argument
+does not refer to an existing directory, @code{cd} will fail instead of
+falling back to @var{physical} mode.
+
+@item
+When the @code{cd} builtin cannot change a directory because the
+length of the pathname 
+constructed from @code{$PWD} and the directory name supplied as an argument
+exceeds @var{PATH_MAX} when all symbolic links are expanded, @code{cd} will
+fail instead of attempting to use only the supplied directory name.
+
+@item
+The @code{pwd} builtin verifies that the value it prints is the same as the
+current directory, even if it is not asked to check the file system with the
+@option{-P} option.
+
+@item
+When listing the history, the @code{fc} builtin does not include an
+indication of whether or not a history entry has been modified.
+
+@item
+The default editor used by @code{fc} is @code{ed}.
+
+@item
+The @code{type} and @code{command} builtins will not report a non-executable
+file as having been found, though the shell will attempt to execute such a
+file if it is the only so-named file found in @code{$PATH}.
+
+@item
+The @code{vi} editing mode will invoke the @code{vi} editor directly when
+the @samp{v} command is run, instead of checking @code{$VISUAL} and
+@code{$EDITOR}.
+
+@item
+When the @code{xpg_echo} option is enabled, Bash does not attempt to interpret
+any arguments to @code{echo} as options.  Each argument is displayed, after
+escape characters are converted.
+
+@item
+The @code{ulimit} builtin uses a block size of 512 bytes for the @option{-c}
+and @option{-f} options.
+
+@item
+The arrival of @code{SIGCHLD}  when a trap is set on @code{SIGCHLD} does
+not interrupt the @code{wait} builtin and cause it to return immediately.
+The trap command is run once for each child that exits.
+
+@item
+The @code{read} builtin may be interrupted by a signal for which a trap
+has been set.
+If Bash receives a trapped signal while executing @code{read}, the trap
+handler executes and @code{read} returns an exit status greater than 128.
+
+@item
+Bash removes an exited background process's status from the list of such
+statuses after the @code{wait} builtin is used to obtain it.
+
+@end enumerate
+
+There is other @sc{posix} behavior that Bash does not implement by
+default even when in @sc{posix} mode.
+Specifically:
+
+@enumerate
+
+@item
+The @code{fc} builtin checks @code{$EDITOR} as a program to edit history
+entries if @code{FCEDIT} is unset, rather than defaulting directly to
+@code{ed}.  @code{fc} uses @code{ed} if @code{EDITOR} is unset.
+
+@item
+As noted above, Bash requires the @code{xpg_echo} option to be enabled for
+the @code{echo} builtin to be fully conformant.
+
+@end enumerate
+
+Bash can be configured to be @sc{posix}-conformant by default, by specifying
+the @option{--enable-strict-posix-default} to @code{configure} when building
+(@pxref{Optional Features}).
+
+@node Shell Compatibility Mode
+@section Shell Compatibility Mode
+@cindex Compatibility Level
+@cindex Compatibility Mode
+
+Bash-4.0 introduced the concept of a `shell compatibility level', specified
+as a set of options to the shopt builtin
+(@code{compat31},
+@code{compat32},
+@code{compat40},
+@code{compat41},
+and so on).
+There is only one current
+compatibility level -- each option is mutually exclusive.
+The compatibility level is intended to allow users to select behavior
+from previous versions that is incompatible with newer versions
+while they migrate scripts to use current features and
+behavior. It's intended to be a temporary solution.
+
+This section does not mention behavior that is standard for a particular
+version (e.g., setting @code{compat32} means that quoting the rhs of the regexp
+matching operator quotes special regexp characters in the word, which is
+default behavior in bash-3.2 and above). 
+
+If a user enables, say, @code{compat32}, it may affect the behavior of other
+compatibility levels up to and including the current compatibility level.
+The idea is that each compatibility level controls behavior that changed
+in that version of Bash,
+but that behavior may have been present in earlier versions.
+For instance, the change to use locale-based comparisons with the @code{[[}
+command came in bash-4.1, and earlier versions used ASCII-based comparisons,
+so enabling @code{compat32} will enable ASCII-based comparisons as well.
+That granularity may not be sufficient for
+all uses, and as a result users should employ compatibility levels carefully.
+Read the documentation for a particular feature to find out the
+current behavior.
+
+Bash-4.3 introduced a new shell variable: @env{BASH_COMPAT}.
+The value assigned
+to this variable (a decimal version number like 4.2, or an integer
+corresponding to the @code{compat}@var{NN} option, like 42) determines the
+compatibility level.
+
+Starting with bash-4.4, Bash has begun deprecating older compatibility
+levels.
+Eventually, the options will be removed in favor of @env{BASH_COMPAT}.
+
+Bash-5.0 is the final version for which there will be an individual shopt
+option for the previous version. Users should use @env{BASH_COMPAT}
+on bash-5.0 and later versions.
+
+The following table describes the behavior changes controlled by each
+compatibility level setting.
+The @code{compat}@var{NN} tag is used as shorthand for setting the
+compatibility level
+to @var{NN} using one of the following mechanisms.
+For versions prior to bash-5.0, the compatibility level may be set using
+the corresponding @code{compat}@var{NN} shopt option.
+For bash-4.3 and later versions, the @env{BASH_COMPAT} variable is preferred,
+and it is required for bash-5.1 and later versions.
+
+@table @code
+@item compat31
+@itemize @bullet
+@item
+quoting the rhs of the @code{[[} command's regexp matching operator (=~)
+has no special effect
+@end itemize
+
+@item compat32
+@itemize @bullet
+@item
+interrupting a command list such as "a ; b ; c" causes the execution
+of the next command in the list (in bash-4.0 and later versions,
+the shell acts as if it received the interrupt, so
+interrupting one command in a list aborts the execution of the
+entire list)
+@end itemize
+
+@item compat40
+@itemize @bullet
+@item
+the @samp{<} and @samp{>} operators to the @code{[[} command do not
+consider the current locale when comparing strings; they use ASCII
+ordering.
+Bash versions prior to bash-4.1 use ASCII collation and strcmp(3);
+bash-4.1 and later use the current locale's collation sequence and
+strcoll(3).
+@end itemize
+
+@item compat41
+@itemize @bullet
+@item
+in posix mode, @code{time} may be followed by options and still be
+recognized as a reserved word (this is @sc{posix} interpretation 267)
+@item
+in posix mode, the parser requires that an even number of single
+quotes occur in the @var{word} portion of a double-quoted $@{@dots{}@}
+parameter expansion and treats them specially, so that characters within
+the single quotes are considered quoted
+(this is @sc{posix} interpretation 221)
+@end itemize
+
+@item compat42
+@itemize @bullet
+@item
+the replacement string in double-quoted pattern substitution does not
+undergo quote removal, as it does in versions after bash-4.2
+@item
+in posix mode, single quotes are considered special when expanding
+the @var{word} portion of a double-quoted $@{@dots{}@} parameter expansion
+and can be used to quote a closing brace or other special character
+(this is part of @sc{posix} interpretation 221);
+in later versions, single quotes
+are not special within double-quoted word expansions
+@end itemize
+
+@item compat43
+@itemize @bullet
+@item
+the shell does not print a warning message if an attempt is made to
+use a quoted compound assignment as an argument to declare
+(declare -a foo='(1 2)'). Later versions warn that this usage is
+deprecated
+@item
+word expansion errors are considered non-fatal errors that cause the
+current command to fail, even in posix mode
+(the default behavior is to make them fatal errors that cause the shell
+to exit)
+@item
+when executing a shell function, the loop state (while/until/etc.)
+is not reset, so @code{break} or @code{continue} in that function will break
+or continue loops in the calling context. Bash-4.4 and later reset
+the loop state to prevent this
+@end itemize
+
+@item compat44
+@itemize @bullet
+@item
+the shell sets up the values used by @env{BASH_ARGV} and @env{BASH_ARGC}
+so they can expand to the shell's positional parameters even if extended
+debugging mode is not enabled
+@item
+a subshell inherits loops from its parent context, so @code{break}
+or @code{continue} will cause the subshell to exit.
+Bash-5.0 and later reset the loop state to prevent the exit
+@item
+variable assignments preceding builtins like @code{export} and @code{readonly}
+that set attributes continue to affect variables with the same
+name in the calling environment even if the shell is not in posix
+mode
+@end itemize
+
+@item compat50 (set using BASH_COMPAT)
+@itemize @bullet
+@item
+Bash-5.1 changed the way @code{$RANDOM} is generated to introduce slightly
+more randomness. If the shell compatibility level is set to 50 or
+lower, it reverts to the method from bash-5.0 and previous versions,
+so seeding the random number generator by assigning a value to
+@env{RANDOM} will produce the same sequence as in bash-5.0
+@item
+If the command hash table is empty, Bash versions prior to bash-5.1
+printed an informational message to that effect, even when producing
+output that can be reused as input. Bash-5.1 suppresses that message
+when the @option{-l} option is supplied.
+@end itemize
+@end table
+
+@node Job Control
+@chapter Job Control
+
+This chapter discusses what job control is, how it works, and how
+Bash allows you to access its facilities.
+
+@menu
+* Job Control Basics::		How job control works.
+* Job Control Builtins::	Bash builtin commands used to interact
+				with job control.
+* Job Control Variables::	Variables Bash uses to customize job
+				control.
+@end menu
+
+@node Job Control Basics
+@section Job Control Basics
+@cindex job control
+@cindex foreground
+@cindex background
+@cindex suspending jobs
+
+Job control
+refers to the ability to selectively stop (suspend)
+the execution of processes and continue (resume)
+their execution at a later point.  A user typically employs
+this facility via an interactive interface supplied jointly
+by the operating system kernel's terminal driver and Bash.
+
+The shell associates a @var{job} with each pipeline.  It keeps a
+table of currently executing jobs, which may be listed with the
+@code{jobs} command.  When Bash starts a job
+asynchronously, it prints a line that looks
+like:
+@example
+[1] 25647
+@end example
+@noindent
+indicating that this job is job number 1 and that the process @sc{id}
+of the last process in the pipeline associated with this job is
+25647.  All of the processes in a single pipeline are members of
+the same job.  Bash uses the @var{job} abstraction as the
+basis for job control. 
+
+To facilitate the implementation of the user interface to job
+control, the operating system maintains the notion of a current terminal
+process group @sc{id}.  Members of this process group (processes whose
+process group @sc{id} is equal to the current terminal process group
+@sc{id}) receive keyboard-generated signals such as @code{SIGINT}. 
+These processes are said to be in the foreground.  Background
+processes are those whose process group @sc{id} differs from the
+terminal's; such processes are immune to keyboard-generated
+signals.  Only foreground processes are allowed to read from or, if
+the user so specifies with @code{stty tostop}, write to the terminal.
+Background processes which attempt to
+read from (write to when @code{stty tostop} is in effect) the
+terminal are sent a @code{SIGTTIN} (@code{SIGTTOU})
+signal by the kernel's terminal driver,
+which, unless caught, suspends the process. 
+
+If the operating system on which Bash is running supports
+job control, Bash contains facilities to use it.  Typing the
+@var{suspend} character (typically @samp{^Z}, Control-Z) while a
+process is running causes that process to be stopped and returns
+control to Bash.  Typing the @var{delayed suspend} character
+(typically @samp{^Y}, Control-Y) causes the process to be stopped
+when it attempts to read input from the terminal, and control to
+be returned to Bash.  The user then manipulates the state of
+this job, using the @code{bg} command to continue it in the
+background, the @code{fg} command to continue it in the
+foreground, or the @code{kill} command to kill it.  A @samp{^Z}
+takes effect immediately, and has the additional side effect of
+causing pending output and typeahead to be discarded. 
+
+There are a number of ways to refer to a job in the shell.  The
+character @samp{%} introduces a job specification (@var{jobspec}).
+
+Job number @code{n} may be referred to as @samp{%n}.
+The symbols @samp{%%} and  @samp{%+} refer to the shell's notion of the
+current job, which is the last job stopped while it was in the foreground
+or started in the background.
+A single @samp{%} (with no accompanying job specification) also refers
+to the current job.
+The previous job may be referenced using @samp{%-}.
+If there is only a single job, @samp{%+} and @samp{%-} can both be used
+to refer to that job.
+In output pertaining to jobs (e.g., the output of the @code{jobs}
+command), the current job is always flagged with a @samp{+}, and the
+previous job with a @samp{-}. 
+
+A job may also be referred to
+using a prefix of the name used to start it, or using a substring
+that appears in its command line.  For example, @samp{%ce} refers
+to a stopped job whose command name begins with @samp{ce}.
+Using @samp{%?ce}, on the
+other hand, refers to any job containing the string @samp{ce} in
+its command line.  If the prefix or substring matches more than one job,
+Bash reports an error.
+
+Simply naming a job can be used to bring it into the foreground:
+@samp{%1} is a synonym for @samp{fg %1}, bringing job 1 from the
+background into the foreground.  Similarly, @samp{%1 &} resumes
+job 1 in the background, equivalent to @samp{bg %1}
+
+The shell learns immediately whenever a job changes state. 
+Normally, Bash waits until it is about to print a prompt
+before reporting changes in a job's status so as to not interrupt
+any other output.
+If the @option{-b} option to the @code{set} builtin is enabled,
+Bash reports such changes immediately (@pxref{The Set Builtin}).
+Any trap on @code{SIGCHLD} is executed for each child process
+that exits.
+
+If an attempt to exit Bash is made while jobs are stopped, (or running, if
+the @code{checkjobs} option is enabled -- see @ref{The Shopt Builtin}), the
+shell prints a warning message, and if the @code{checkjobs} option is
+enabled, lists the jobs and their statuses.
+The @code{jobs} command may then be used to inspect their status.
+If a second attempt to exit is made without an intervening command,
+Bash does not print another warning, and any stopped jobs are terminated.
+
+When the shell is waiting for a job or process using the @code{wait}
+builtin, and job control is enabled, @code{wait} will return when the
+job changes state. The @option{-f} option causes @code{wait} to wait
+until the job or process terminates before returning.
+
+@node Job Control Builtins
+@section Job Control Builtins
+
+@table @code
+
+@item bg
+@btindex bg
+@example
+bg [@var{jobspec} @dots{}]
+@end example
+
+Resume each suspended job @var{jobspec} in the background, as if it
+had been started with @samp{&}.
+If @var{jobspec} is not supplied, the current job is used.
+The return status is zero unless it is run when job control is not
+enabled, or, when run with job control enabled, any
+@var{jobspec} was not found or specifies a job
+that was started without job control.
+
+@item fg
+@btindex fg
+@example
+fg [@var{jobspec}]
+@end example
+
+Resume the job @var{jobspec} in the foreground and make it the current job.
+If @var{jobspec} is not supplied, the current job is used.
+The return status is that of the command placed into the foreground,
+or non-zero if run when job control is disabled or, when run with
+job control enabled, @var{jobspec} does not specify a valid job or
+@var{jobspec} specifies a job that was started without job control.
+
+@item jobs
+@btindex jobs
+@example
+jobs [-lnprs] [@var{jobspec}]
+jobs -x @var{command} [@var{arguments}]
+@end example
+
+The first form lists the active jobs.  The options have the
+following meanings:
+
+@table @code
+@item -l
+List process @sc{id}s in addition to the normal information.
+
+@item -n
+Display information only about jobs that have changed status since
+the user was last notified of their status.
+
+@item -p
+List only the process @sc{id} of the job's process group leader.
+
+@item -r
+Display only running jobs.
+
+@item -s
+Display only stopped jobs.
+@end table
+
+If @var{jobspec} is given,
+output is restricted to information about that job. 
+If @var{jobspec} is not supplied, the status of all jobs is
+listed.
+
+If the @option{-x} option is supplied, @code{jobs} replaces any
+@var{jobspec} found in @var{command} or @var{arguments} with the
+corresponding process group @sc{id}, and executes @var{command},
+passing it @var{argument}s, returning its exit status. 
+
+@item kill
+@btindex kill
+@example
+kill [-s @var{sigspec}] [-n @var{signum}] [-@var{sigspec}] @var{jobspec} or @var{pid}
+kill -l|-L [@var{exit_status}]
+@end example
+
+Send a signal specified by @var{sigspec} or @var{signum} to the process
+named by job specification @var{jobspec} or process @sc{id} @var{pid}.
+@var{sigspec} is either a case-insensitive signal name such as
+@code{SIGINT} (with or without the @code{SIG} prefix)
+or a signal number; @var{signum} is a signal number.
+If @var{sigspec} and @var{signum} are not present, @code{SIGTERM} is used.
+The @option{-l} option lists the signal names.
+If any arguments are supplied when @option{-l} is given, the names of the
+signals corresponding to the arguments are listed, and the return status
+is zero.
+@var{exit_status} is a number specifying a signal number or the exit
+status of a process terminated by a signal.
+The @option{-L} option is equivalent to @option{-l}.
+The return status is zero if at least one signal was successfully sent,
+or non-zero if an error occurs or an invalid option is encountered.
+
+@item wait
+@btindex wait
+@example
+wait [-fn] [-p @var{varname}] [@var{jobspec} or @var{pid} @dots{}]
+@end example
+
+Wait until the child process specified by each process @sc{id} @var{pid}
+or job specification @var{jobspec} exits and return the exit status of the
+last command waited for.
+If a job spec is given, all processes in the job are waited for.
+If no arguments are given,
+@code{wait} waits for all running background jobs and
+the last-executed process substitution, if its process id is the same as
+@var{$!},
+and the return status is zero.
+If the @option{-n} option is supplied, @code{wait} waits for a single job
+from the list of @var{pids} or @var{jobspecs} or, if no arguments are
+supplied, any job, 
+to complete and returns its exit status.
+If none of the supplied arguments is a child of the shell, or if no arguments
+are supplied and the shell has no unwaited-for children, the exit status
+is 127.
+If the @option{-p} option is supplied, the process or job identifier of the job
+for which the exit status is returned is assigned to the variable
+@var{varname} named by the option argument.
+The variable will be unset initially, before any assignment.
+This is useful only when the @option{-n} option is supplied.
+Supplying the @option{-f} option, when job control is enabled,
+forces @code{wait} to wait for each @var{pid} or @var{jobspec} to
+terminate before returning its status, intead of returning when it changes
+status.
+If neither @var{jobspec} nor @var{pid} specifies an active child process
+of the shell, the return status is 127.
+
+@item disown
+@btindex disown
+@example
+disown [-ar] [-h] [@var{jobspec} @dots{} | @var{pid} @dots{} ]
+@end example
+
+Without options, remove each @var{jobspec} from the table of
+active jobs.
+If the @option{-h} option is given, the job is not removed from the table,
+but is marked so that @code{SIGHUP} is not sent to the job if the shell
+receives a @code{SIGHUP}.
+If @var{jobspec} is not present, and neither the @option{-a} nor the
+@option{-r} option is supplied, the current job is used.
+If no @var{jobspec} is supplied, the @option{-a} option means to remove or
+mark all jobs; the @option{-r} option without a @var{jobspec}
+argument restricts operation to running jobs.
+
+@item suspend
+@btindex suspend
+@example
+suspend [-f]
+@end example
+
+Suspend the execution of this shell until it receives a
+@code{SIGCONT} signal.
+A login shell cannot be suspended; the @option{-f}
+option can be used to override this and force the suspension.
+@end table
+
+When job control is not active, the @code{kill} and @code{wait}
+builtins do not accept @var{jobspec} arguments.  They must be
+supplied process @sc{id}s.
+
+@node Job Control Variables
+@section Job Control Variables
+
+@vtable @code
+
+@item auto_resume
+This variable controls how the shell interacts with the user and
+job control.  If this variable exists then single word simple
+commands without redirections are treated as candidates for resumption
+of an existing job.  There is no ambiguity allowed; if there is
+more than one job beginning with the string typed, then
+the most recently accessed job will be selected.
+The name of a stopped job, in this context, is the command line
+used to start it.  If this variable is set to the value @samp{exact},
+the string supplied must match the name of a stopped job exactly;
+if set to @samp{substring},
+the string supplied needs to match a substring of the name of a
+stopped job.  The @samp{substring} value provides functionality
+analogous to the @samp{%?} job @sc{id} (@pxref{Job Control Basics}).
+If set to any other value, the supplied string must
+be a prefix of a stopped job's name; this provides functionality
+analogous to the @samp{%} job @sc{id}.
+
+@end vtable
+
+@set readline-appendix
+@set history-appendix
+@cindex Readline, how to use
+@include rluser.texi
+@cindex History, how to use
+@include hsuser.texi
+@clear readline-appendix
+@clear history-appendix
+
+@node Installing Bash
+@chapter Installing Bash
+
+This chapter provides basic instructions for installing Bash on
+the various supported platforms.  The distribution supports the
+@sc{gnu} operating systems, nearly every version of Unix, and several
+non-Unix systems such as BeOS and Interix.
+Other independent ports exist for
+@sc{ms-dos}, @sc{os/2}, and Windows platforms.
+
+@menu
+* Basic Installation::	Installation instructions.
+* Compilers and Options::	How to set special options for various
+				systems.
+* Compiling For Multiple Architectures::	How to compile Bash for more
+						than one kind of system from
+						the same source tree.
+* Installation Names::	How to set the various paths used by the installation.
+* Specifying the System Type::	How to configure Bash for a particular system.
+* Sharing Defaults::	How to share default configuration values among GNU
+			programs.
+* Operation Controls::	Options recognized by the configuration program.
+* Optional Features::	How to enable and disable optional features when
+			building Bash.
+@end menu
+
+@node Basic Installation
+@section Basic Installation
+@cindex installation
+@cindex configuration
+@cindex Bash installation
+@cindex Bash configuration
+
+These are installation instructions for Bash.
+
+The simplest way to compile Bash is:
+
+@enumerate
+@item
+@code{cd} to the directory containing the source code and type
+@samp{./configure} to configure Bash for your system.  If you're
+using @code{csh} on an old version of System V, you might need to
+type @samp{sh ./configure} instead to prevent @code{csh} from trying
+to execute @code{configure} itself.
+
+Running @code{configure} takes some time.
+While running, it prints messages telling which features it is
+checking for.
+
+@item
+Type @samp{make} to compile Bash and build the @code{bashbug} bug
+reporting script.
+
+@item
+Optionally, type @samp{make tests} to run the Bash test suite.
+
+@item
+Type @samp{make install} to install @code{bash} and @code{bashbug}.
+This will also install the manual pages and Info file.
+
+@end enumerate
+
+The @code{configure} shell script attempts to guess correct
+values for various system-dependent variables used during
+compilation.  It uses those values to create a @file{Makefile} in
+each directory of the package (the top directory, the
+@file{builtins}, @file{doc}, and @file{support} directories,
+each directory under @file{lib}, and several others).  It also creates a
+@file{config.h} file containing system-dependent definitions. 
+Finally, it creates a shell script named @code{config.status} that you
+can run in the future to recreate the current configuration, a
+file @file{config.cache} that saves the results of its tests to
+speed up reconfiguring, and a file @file{config.log} containing
+compiler output (useful mainly for debugging @code{configure}). 
+If at some point
+@file{config.cache} contains results you don't want to keep, you
+may remove or edit it. 
+
+To find out more about the options and arguments that the
+@code{configure} script understands, type 
+
+@example
+bash-4.2$ ./configure --help
+@end example
+
+@noindent
+at the Bash prompt in your Bash source directory.
+
+If you want to build Bash in a directory separate from the source
+directory -- to build for multiple architectures, for example --
+just use the full path to the configure script. The following commands
+will build bash in a directory under @file{/usr/local/build} from
+the source code in @file{/usr/local/src/bash-4.4}:
+
+@example
+mkdir /usr/local/build/bash-4.4
+cd /usr/local/build/bash-4.4
+bash /usr/local/src/bash-4.4/configure
+make
+@end example
+
+See @ref{Compiling For Multiple Architectures} for more information
+about building in a directory separate from the source.
+
+If you need to do unusual things to compile Bash, please
+try to figure out how @code{configure} could check whether or not
+to do them, and mail diffs or instructions to
+@email{bash-maintainers@@gnu.org} so they can be
+considered for the next release.
+
+The file @file{configure.ac} is used to create @code{configure}
+by a program called Autoconf.  You only need
+@file{configure.ac} if you want to change it or regenerate
+@code{configure} using a newer version of Autoconf.  If
+you do this, make sure you are using Autoconf version 2.50 or
+newer.
+
+You can remove the program binaries and object files from the
+source code directory by typing @samp{make clean}.  To also remove the
+files that @code{configure} created (so you can compile Bash for
+a different kind of computer), type @samp{make distclean}.
+
+@node Compilers and Options
+@section Compilers and Options
+
+Some systems require unusual options for compilation or linking
+that the @code{configure} script does not know about.  You can
+give @code{configure} initial values for variables by setting
+them in the environment.  Using a Bourne-compatible shell, you
+can do that on the command line like this:
+
+@example
+CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+@end example
+
+On systems that have the @code{env} program, you can do it like this:
+
+@example
+env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+@end example
+
+The configuration process uses GCC to build Bash if it
+is available.
+
+@node Compiling For Multiple Architectures
+@section Compiling For Multiple Architectures
+
+You can compile Bash for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of @code{make} that
+supports the @code{VPATH} variable, such as GNU @code{make}.
+@code{cd} to the
+directory where you want the object files and executables to go and run
+the @code{configure} script from the source directory
+(@pxref{Basic Installation}).
+You may need to
+supply the @option{--srcdir=PATH} argument to tell @code{configure} where the
+source files are.  @code{configure} automatically checks for the
+source code in the directory that @code{configure} is in and in `..'.
+
+If you have to use a @code{make} that does not supports the @code{VPATH}
+variable, you can compile Bash for one architecture at a
+time in the source code directory.  After you have installed
+Bash for one architecture, use @samp{make distclean} before
+reconfiguring for another architecture.
+
+Alternatively, if your system supports symbolic links, you can use the
+@file{support/mkclone} script to create a build tree which has
+symbolic links back to each file in the source directory.  Here's an
+example that creates a build directory in the current directory from a
+source directory @file{/usr/gnu/src/bash-2.0}:
+
+@example
+bash /usr/gnu/src/bash-2.0/support/mkclone -s /usr/gnu/src/bash-2.0 .
+@end example
+
+@noindent
+The @code{mkclone} script requires Bash, so you must have already built
+Bash for at least one architecture before you can create build
+directories for other architectures.
+
+@node Installation Names
+@section Installation Names
+
+By default, @samp{make install} will install into
+@file{/usr/local/bin}, @file{/usr/local/man}, etc.  You can
+specify an installation prefix other than @file{/usr/local} by
+giving @code{configure} the option @option{--prefix=@var{PATH}},
+or by specifying a value for the @code{DESTDIR} @samp{make}
+variable when running @samp{make install}.
+
+You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. 
+If you give @code{configure} the option
+@option{--exec-prefix=@var{PATH}}, @samp{make install} will use
+@var{PATH} as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix. 
+
+@node Specifying the System Type
+@section Specifying the System Type
+
+There may be some features @code{configure} can not figure out
+automatically, but need to determine by the type of host Bash
+will run on.  Usually @code{configure} can figure that
+out, but if it prints a message saying it can not guess the host
+type, give it the @option{--host=TYPE} option.  @samp{TYPE} can
+either be a short name for the system type, such as @samp{sun4},
+or a canonical name with three fields: @samp{CPU-COMPANY-SYSTEM}
+(e.g., @samp{i386-unknown-freebsd4.2}).
+
+See the file @file{support/config.sub} for the possible
+values of each field. 
+
+@node Sharing Defaults
+@section Sharing Defaults
+
+If you want to set default values for @code{configure} scripts to
+share, you can create a site shell script called
+@code{config.site} that gives default values for variables like
+@code{CC}, @code{cache_file}, and @code{prefix}.  @code{configure}
+looks for @file{PREFIX/share/config.site} if it exists, then
+@file{PREFIX/etc/config.site} if it exists.  Or, you can set the
+@code{CONFIG_SITE} environment variable to the location of the site
+script.  A warning: the Bash @code{configure} looks for a site script,
+but not all @code{configure} scripts do.
+
+@node Operation Controls
+@section Operation Controls
+
+@code{configure} recognizes the following options to control how it
+operates.
+
+@table @code
+
+@item --cache-file=@var{file}
+Use and save the results of the tests in
+@var{file} instead of @file{./config.cache}.  Set @var{file} to
+@file{/dev/null} to disable caching, for debugging
+@code{configure}. 
+
+@item --help
+Print a summary of the options to @code{configure}, and exit.
+
+@item --quiet
+@itemx --silent
+@itemx -q
+Do not print messages saying which checks are being made.
+
+@item --srcdir=@var{dir}
+Look for the Bash source code in directory @var{dir}.  Usually
+@code{configure} can determine that directory automatically.
+
+@item --version
+Print the version of Autoconf used to generate the @code{configure}
+script, and exit.
+@end table
+
+@code{configure} also accepts some other, not widely used, boilerplate
+options.  @samp{configure --help} prints the complete list.
+
+@node Optional Features
+@section Optional Features
+
+The Bash @code{configure} has a number of @option{--enable-@var{feature}}
+options, where @var{feature} indicates an optional part of Bash.
+There are also several @option{--with-@var{package}} options,
+where @var{package} is something like @samp{bash-malloc} or @samp{purify}.
+To turn off the default use of a package, use
+@option{--without-@var{package}}.  To configure Bash without a feature
+that is enabled by default, use @option{--disable-@var{feature}}.
+
+Here is a complete list of the @option{--enable-} and
+@option{--with-} options that the Bash @code{configure} recognizes. 
+
+@table @code
+@item --with-afs
+Define if you are using the Andrew File System from Transarc.
+
+@item --with-bash-malloc
+Use the Bash version of
+@code{malloc} in the directory @file{lib/malloc}.  This is not the same
+@code{malloc} that appears in @sc{gnu} libc, but an older version
+originally derived from the 4.2 @sc{bsd} @code{malloc}.  This @code{malloc}
+is very fast, but wastes some space on each allocation.
+This option is enabled by default.
+The @file{NOTES} file contains a list of systems for
+which this should be turned off, and @code{configure} disables this
+option automatically for a number of systems.
+
+@item --with-curses
+Use the curses library instead of the termcap library.  This should
+be supplied if your system has an inadequate or incomplete termcap
+database.
+
+@item --with-gnu-malloc
+A synonym for @code{--with-bash-malloc}.
+
+@item --with-installed-readline[=@var{PREFIX}]
+Define this to make Bash link with a locally-installed version of Readline
+rather than the version in @file{lib/readline}.  This works only with
+Readline 5.0 and later versions.  If @var{PREFIX} is @code{yes} or not
+supplied, @code{configure} uses the values of the make variables
+@code{includedir} and @code{libdir}, which are subdirectories of @code{prefix}
+by default, to find the installed version of Readline if it is not in
+the standard system include and library directories.
+If @var{PREFIX} is @code{no}, Bash links with the version in
+@file{lib/readline}.
+If @var{PREFIX} is set to any other value, @code{configure} treats it as
+a directory pathname and looks for
+the installed version of Readline in subdirectories of that directory
+(include files in @var{PREFIX}/@code{include} and the library in
+@var{PREFIX}/@code{lib}).
+
+@item --with-purify
+Define this to use the Purify memory allocation checker from Rational
+Software.
+
+@item --enable-minimal-config
+This produces a shell with minimal features, close to the historical
+Bourne shell.
+@end table
+
+There are several @option{--enable-} options that alter how Bash is
+compiled and linked, rather than changing run-time features.
+
+@table @code
+@item --enable-largefile
+Enable support for @uref{http://www.unix.org/version2/whatsnew/lfs20mar.html,
+large files} if the operating system requires special compiler options
+to build programs which can access large files.  This is enabled by
+default, if the operating system provides large file support.
+
+@item --enable-profiling
+This builds a Bash binary that produces profiling information to be
+processed by @code{gprof} each time it is executed.
+
+@item --enable-static-link
+This causes Bash to be linked statically, if @code{gcc} is being used.
+This could be used to build a version to use as root's shell.
+@end table
+
+The @samp{minimal-config} option can be used to disable all of
+the following options, but it is processed first, so individual
+options may be enabled using @samp{enable-@var{feature}}. 
+
+All of the following options except for @samp{disabled-builtins},
+@samp{direxpand-default}, and
+@samp{xpg-echo-default} are
+enabled by default, unless the operating system does not provide the
+necessary support.
+
+@table @code
+@item --enable-alias
+Allow alias expansion and include the @code{alias} and @code{unalias}
+builtins (@pxref{Aliases}).
+
+@item --enable-arith-for-command
+Include support for the alternate form of the @code{for} command
+that behaves like the C language @code{for} statement
+(@pxref{Looping Constructs}).
+
+@item --enable-array-variables
+Include support for one-dimensional array shell variables
+(@pxref{Arrays}).
+
+@item --enable-bang-history
+Include support for @code{csh}-like history substitution
+(@pxref{History Interaction}).
+
+@item --enable-brace-expansion
+Include @code{csh}-like brace expansion
+( @code{b@{a,b@}c} @expansion{} @code{bac bbc} ).
+See @ref{Brace Expansion}, for a complete description.
+
+@item --enable-casemod-attributes
+Include support for case-modifying attributes in the @code{declare} builtin
+and assignment statements.  Variables with the @var{uppercase} attribute,
+for example, will have their values converted to uppercase upon assignment.
+
+@item --enable-casemod-expansion
+Include support for case-modifying word expansions.
+
+@item --enable-command-timing
+Include support for recognizing @code{time} as a reserved word and for
+displaying timing statistics for the pipeline following @code{time}
+(@pxref{Pipelines}).
+This allows pipelines as well as shell builtins and functions to be timed.
+
+@item --enable-cond-command
+Include support for the @code{[[} conditional command.
+(@pxref{Conditional Constructs}).
+
+@item --enable-cond-regexp
+Include support for matching @sc{posix} regular expressions using the
+@samp{=~} binary operator in the @code{[[} conditional command.
+(@pxref{Conditional Constructs}).
+
+@item --enable-coprocesses
+Include support for coprocesses and the @code{coproc} reserved word
+(@pxref{Pipelines}).
+
+@item --enable-debugger
+Include support for the bash debugger (distributed separately).
+
+@item --enable-dev-fd-stat-broken
+If calling @code{stat} on /dev/fd/@var{N} returns different results than
+calling @code{fstat} on file descriptor @var{N}, supply this option to
+enable a workaround.
+This has implications for conditional commands that test file attributes.
+
+@item --enable-direxpand-default
+Cause the @code{direxpand} shell option (@pxref{The Shopt Builtin})
+to be enabled by default when the shell starts.
+It is normally disabled by default.
+
+@item --enable-directory-stack
+Include support for a @code{csh}-like directory stack and the
+@code{pushd}, @code{popd}, and @code{dirs} builtins
+(@pxref{The Directory Stack}).
+
+@item --enable-disabled-builtins
+Allow builtin commands to be invoked via @samp{builtin xxx}
+even after @code{xxx} has been disabled using @samp{enable -n xxx}.
+See @ref{Bash Builtins}, for details of the @code{builtin} and
+@code{enable} builtin commands.
+
+@item --enable-dparen-arithmetic
+Include support for the @code{((@dots{}))} command
+(@pxref{Conditional Constructs}).
+
+@item --enable-extended-glob
+Include support for the extended pattern matching features described
+above under @ref{Pattern Matching}.
+
+@item --enable-extended-glob-default
+Set the default value of the @var{extglob} shell option described
+above under @ref{The Shopt Builtin} to be enabled.
+
+@item --enable-function-import
+Include support for importing function definitions exported by another
+instance of the shell from the environment.  This option is enabled by
+default.
+
+@item --enable-glob-asciirange-default
+Set the default value of the @var{globasciiranges} shell option described
+above under @ref{The Shopt Builtin} to be enabled.
+This controls the behavior of character ranges when used in pattern matching
+bracket expressions.
+
+@item --enable-help-builtin
+Include the @code{help} builtin, which displays help on shell builtins and
+variables (@pxref{Bash Builtins}).
+
+@item --enable-history
+Include command history and the @code{fc} and @code{history}
+builtin commands (@pxref{Bash History Facilities}).
+
+@item --enable-job-control
+This enables the job control features (@pxref{Job Control}),
+if the operating system supports them.
+
+@item --enable-multibyte
+This enables support for multibyte characters if the operating
+system provides the necessary support.
+
+@item --enable-net-redirections
+This enables the special handling of filenames of the form
+@code{/dev/tcp/@var{host}/@var{port}} and
+@code{/dev/udp/@var{host}/@var{port}}
+when used in redirections (@pxref{Redirections}).
+
+@item --enable-process-substitution
+This enables process substitution (@pxref{Process Substitution}) if
+the operating system provides the necessary support.
+
+@item --enable-progcomp
+Enable the programmable completion facilities
+(@pxref{Programmable Completion}).
+If Readline is not enabled, this option has no effect.
+
+@item --enable-prompt-string-decoding
+Turn on the interpretation of a number of backslash-escaped characters
+in the @env{$PS0}, @env{$PS1}, @env{$PS2}, and @env{$PS4} prompt
+strings.  See @ref{Controlling the Prompt}, for a complete list of prompt
+string escape sequences.
+
+@item --enable-readline
+Include support for command-line editing and history with the Bash
+version of the Readline library (@pxref{Command Line Editing}).
+
+@item --enable-restricted
+Include support for a @dfn{restricted shell}.  If this is enabled, Bash,
+when called as @code{rbash}, enters a restricted mode.  See
+@ref{The Restricted Shell}, for a description of restricted mode.
+
+@item --enable-select
+Include the @code{select} compound command, which allows the generation of
+simple menus (@pxref{Conditional Constructs}).
+
+@item --enable-separate-helpfiles
+Use external files for the documentation displayed by the @code{help} builtin
+instead of storing the text internally.
+
+@item --enable-single-help-strings
+Store the text displayed by the @code{help} builtin as a single string for
+each help topic.  This aids in translating the text to different languages.
+You may need to disable this if your compiler cannot handle very long string
+literals.
+
+@item --enable-strict-posix-default
+Make Bash @sc{posix}-conformant by default (@pxref{Bash POSIX Mode}).
+
+@item --enable-usg-echo-default
+A synonym for @code{--enable-xpg-echo-default}.
+
+@item --enable-xpg-echo-default
+Make the @code{echo} builtin expand backslash-escaped characters by default,
+without requiring the @option{-e} option.
+This sets the default value of the @code{xpg_echo} shell option to @code{on},
+which makes the Bash @code{echo} behave more like the version specified in
+the Single Unix Specification, version 3.
+@xref{Bash Builtins}, for a description of the escape sequences that
+@code{echo} recognizes.
+@end table
+
+The file @file{config-top.h} contains C Preprocessor
+@samp{#define} statements for options which are not settable from
+@code{configure}.
+Some of these are not meant to be changed; beware of the consequences if
+you do.
+Read the comments associated with each definition for more
+information about its effect.
+
+@node Reporting Bugs
+@appendix Reporting Bugs
+
+Please report all bugs you find in Bash.
+But first, you should
+make sure that it really is a bug, and that it appears in the latest
+version of Bash.
+The latest version of Bash is always available for FTP from
+@uref{ftp://ftp.gnu.org/pub/gnu/bash/}.
+
+Once you have determined that a bug actually exists, use the
+@code{bashbug} command to submit a bug report.
+If you have a fix, you are encouraged to mail that as well!
+Suggestions and `philosophical' bug reports may be mailed
+to @email{bug-bash@@gnu.org} or posted to the Usenet
+newsgroup @code{gnu.bash.bug}.
+
+All bug reports should include:
+@itemize @bullet
+@item
+The version number of Bash.
+@item
+The hardware and operating system.
+@item
+The compiler used to compile Bash.
+@item
+A description of the bug behaviour.
+@item
+A short script or `recipe' which exercises the bug and may be used
+to reproduce it.
+@end itemize
+
+@noindent
+@code{bashbug} inserts the first three items automatically into
+the template it provides for filing a bug report.
+
+Please send all reports concerning this manual to
+@email{bug-bash@@gnu.org}.
+
+@node Major Differences From The Bourne Shell
+@appendix Major Differences From The Bourne Shell
+
+Bash implements essentially the same grammar, parameter and
+variable expansion, redirection, and quoting as the Bourne Shell. 
+Bash uses the @sc{posix} standard as the specification of
+how these features are to be implemented.  There are some
+differences between the traditional Bourne shell and Bash; this
+section quickly details the differences of significance.  A
+number of these differences are explained in greater depth in
+previous sections.
+This section uses the version of @code{sh} included in SVR4.2 (the
+last version of the historical Bourne shell) as the baseline reference.
+
+@itemize @bullet
+
+@item
+Bash is @sc{posix}-conformant, even where the @sc{posix} specification
+differs from traditional @code{sh} behavior (@pxref{Bash POSIX Mode}).
+
+@item
+Bash has multi-character invocation options (@pxref{Invoking Bash}).
+
+@item
+Bash has command-line editing (@pxref{Command Line Editing}) and
+the @code{bind} builtin.
+
+@item
+Bash provides a programmable word completion mechanism
+(@pxref{Programmable Completion}), and builtin commands
+@code{complete}, @code{compgen}, and @code{compopt}, to
+manipulate it.
+
+@item
+Bash has command history (@pxref{Bash History Facilities}) and the
+@code{history} and @code{fc} builtins to manipulate it.
+The Bash history list maintains timestamp information and uses the
+value of the @code{HISTTIMEFORMAT} variable to display it.
+
+@item
+Bash implements @code{csh}-like history expansion
+(@pxref{History Interaction}).
+
+@item
+Bash has one-dimensional array variables (@pxref{Arrays}), and the
+appropriate variable expansions and assignment syntax to use them.
+Several of the Bash builtins take options to act on arrays.
+Bash provides a number of built-in array variables.
+
+@item
+The @code{$'@dots{}'} quoting syntax, which expands ANSI-C
+backslash-escaped characters in the text between the single quotes,
+is supported (@pxref{ANSI-C Quoting}).
+
+@item
+Bash supports the @code{$"@dots{}"} quoting syntax to do
+locale-specific translation of the characters between the double
+quotes.  The @option{-D}, @option{--dump-strings}, and @option{--dump-po-strings}
+invocation options list the translatable strings found in a script
+(@pxref{Locale Translation}).
+
+@item
+Bash implements the @code{!} keyword to negate the return value of
+a pipeline (@pxref{Pipelines}).
+Very useful when an @code{if} statement needs to act only if a test fails.
+The Bash @samp{-o pipefail} option to @code{set} will cause a pipeline to
+return a failure status if any command fails.
+
+@item
+Bash has the @code{time} reserved word and command timing (@pxref{Pipelines}).
+The display of the timing statistics may be controlled with the
+@env{TIMEFORMAT} variable.
+
+@item
+Bash implements the @code{for (( @var{expr1} ; @var{expr2} ; @var{expr3} ))}
+arithmetic for command, similar to the C language (@pxref{Looping Constructs}).
+
+@item
+Bash includes the @code{select} compound command, which allows the
+generation of simple menus (@pxref{Conditional Constructs}).
+
+@item
+Bash includes the @code{[[} compound command, which makes conditional
+testing part of the shell grammar (@pxref{Conditional Constructs}), including
+optional regular expression matching.
+
+@item
+Bash provides optional case-insensitive matching for the @code{case} and
+@code{[[} constructs.
+
+@item
+Bash includes brace expansion (@pxref{Brace Expansion}) and tilde
+expansion (@pxref{Tilde Expansion}).
+
+@item
+Bash implements command aliases and the @code{alias} and @code{unalias}
+builtins (@pxref{Aliases}).
+
+@item
+Bash provides shell arithmetic, the @code{((} compound command
+(@pxref{Conditional Constructs}),
+and arithmetic expansion (@pxref{Shell Arithmetic}).
+
+@item
+Variables present in the shell's initial environment are automatically
+exported to child processes.  The Bourne shell does not normally do
+this unless the variables are explicitly marked using the @code{export}
+command.
+
+@item
+Bash supports the @samp{+=} assignment operator, which appends to the value
+of the variable named on the left hand side.
+
+@item
+Bash includes the @sc{posix} pattern removal @samp{%}, @samp{#}, @samp{%%}
+and @samp{##} expansions to remove leading or trailing substrings from
+variable values (@pxref{Shell Parameter Expansion}).
+
+@item
+The expansion @code{$@{#xx@}}, which returns the length of @code{$@{xx@}},
+is supported (@pxref{Shell Parameter Expansion}).
+
+@item
+The expansion @code{$@{var:}@var{offset}@code{[:}@var{length}@code{]@}},
+which expands to the substring of @code{var}'s value of length
+@var{length}, beginning at @var{offset}, is present
+(@pxref{Shell Parameter Expansion}).
+
+@item
+The expansion
+@code{$@{var/[/]}@var{pattern}@code{[/}@var{replacement}@code{]@}},
+which matches @var{pattern} and replaces it with @var{replacement} in
+the value of @code{var}, is available (@pxref{Shell Parameter Expansion}).
+
+@item
+The expansion @code{$@{!@var{prefix}*@}} expansion, which expands to
+the names of all shell variables whose names begin with @var{prefix},
+is available (@pxref{Shell Parameter Expansion}).
+
+@item
+Bash has @var{indirect} variable expansion using @code{$@{!word@}}
+(@pxref{Shell Parameter Expansion}).
+
+@item
+Bash can expand positional parameters beyond @code{$9} using
+@code{$@{@var{num}@}}.
+
+@item
+The @sc{posix} @code{$()} form of command substitution
+is implemented (@pxref{Command Substitution}),
+and preferred to the Bourne shell's @code{``} (which
+is also implemented for backwards compatibility).
+
+@item
+Bash has process substitution (@pxref{Process Substitution}).
+
+@item
+Bash automatically assigns variables that provide information about the
+current user (@env{UID}, @env{EUID}, and @env{GROUPS}), the current host
+(@env{HOSTTYPE}, @env{OSTYPE}, @env{MACHTYPE}, and @env{HOSTNAME}),
+and the instance of Bash that is running (@env{BASH},
+@env{BASH_VERSION}, and @env{BASH_VERSINFO}).  @xref{Bash Variables},
+for details.
+
+@item
+The @env{IFS} variable is used to split only the results of expansion,
+not all words (@pxref{Word Splitting}).
+This closes a longstanding shell security hole.
+
+@item
+The filename expansion bracket expression code uses @samp{!} and @samp{^}
+to negate the set of characters between the brackets.
+The Bourne shell uses only @samp{!}.
+
+@item
+Bash implements the full set of @sc{posix} filename expansion operators,
+including @var{character classes}, @var{equivalence classes}, and
+@var{collating symbols} (@pxref{Filename Expansion}).
+
+@item
+Bash implements extended pattern matching features when the @code{extglob}
+shell option is enabled (@pxref{Pattern Matching}).
+
+@item
+It is possible to have a variable and a function with the same name;
+@code{sh} does not separate the two name spaces.
+
+@item
+Bash functions are permitted to have local variables using the
+@code{local} builtin, and thus useful recursive functions may be written
+(@pxref{Bash Builtins}).
+
+@item
+Variable assignments preceding commands affect only that command, even
+builtins and functions (@pxref{Environment}).
+In @code{sh}, all variable assignments 
+preceding commands are global unless the command is executed from the
+file system.
+
+@item
+Bash performs filename expansion on filenames specified as operands
+to input and output redirection operators (@pxref{Redirections}).
+
+@item
+Bash contains the @samp{<>} redirection operator, allowing a file to be
+opened for both reading and writing, and the @samp{&>} redirection
+operator, for directing standard output and standard error to the same
+file (@pxref{Redirections}).
+
+@item
+Bash includes the @samp{<<<} redirection operator, allowing a string to
+be used as the standard input to a command.
+
+@item
+Bash implements the @samp{[n]<&@var{word}} and @samp{[n]>&@var{word}}
+redirection operators, which move one file descriptor to another.
+
+@item
+Bash treats a number of filenames specially when they are
+used in redirection operators (@pxref{Redirections}).
+
+@item
+Bash can open network connections to arbitrary machines and services
+with the redirection operators (@pxref{Redirections}).
+
+@item
+The @code{noclobber} option is available to avoid overwriting existing
+files with output redirection (@pxref{The Set Builtin}).
+The @samp{>|} redirection operator may be used to override @code{noclobber}.
+
+@item
+The Bash @code{cd} and @code{pwd} builtins (@pxref{Bourne Shell Builtins})
+each take @option{-L} and @option{-P} options to switch between logical and
+physical modes.
+
+@item
+Bash allows a function to override a builtin with the same name, and provides
+access to that builtin's functionality within the function via the
+@code{builtin} and @code{command} builtins (@pxref{Bash Builtins}).
+
+@item
+The @code{command} builtin allows selective disabling of functions
+when command lookup is performed (@pxref{Bash Builtins}).
+
+@item
+Individual builtins may be enabled or disabled using the @code{enable}
+builtin (@pxref{Bash Builtins}).
+
+@item
+The Bash @code{exec} builtin takes additional options that allow users
+to control the contents of the environment passed to the executed
+command, and what the zeroth argument to the command is to be
+(@pxref{Bourne Shell Builtins}).
+
+@item
+Shell functions may be exported to children via the environment
+using @code{export -f} (@pxref{Shell Functions}).
+
+@item
+The Bash @code{export}, @code{readonly}, and @code{declare} builtins can
+take a @option{-f} option to act on shell functions, a @option{-p} option to
+display variables with various attributes set in a format that can be
+used as shell input, a @option{-n} option to remove various variable
+attributes, and @samp{name=value} arguments to set variable attributes
+and values simultaneously.
+
+@item
+The Bash @code{hash} builtin allows a name to be associated with
+an arbitrary filename, even when that filename cannot be found by
+searching the @env{$PATH}, using @samp{hash -p}
+(@pxref{Bourne Shell Builtins}).
+
+@item
+Bash includes a @code{help} builtin for quick reference to shell
+facilities (@pxref{Bash Builtins}).
+
+@item
+The @code{printf} builtin is available to display formatted output
+(@pxref{Bash Builtins}).
+
+@item
+The Bash @code{read} builtin (@pxref{Bash Builtins})
+will read a line ending in @samp{\} with
+the @option{-r} option, and will use the @env{REPLY} variable as a
+default if no non-option arguments are supplied.
+The Bash @code{read} builtin
+also accepts a prompt string with the @option{-p} option and will use
+Readline to obtain the line when given the @option{-e} option.
+The @code{read} builtin also has additional options to control input:
+the @option{-s} option will turn off echoing of input characters as
+they are read, the @option{-t} option will allow @code{read} to time out
+if input does not arrive within a specified number of seconds, the
+@option{-n} option will allow reading only a specified number of
+characters rather than a full line, and the @option{-d} option will read
+until a particular character rather than newline.
+
+@item
+The @code{return} builtin may be used to abort execution of scripts
+executed with the @code{.} or @code{source} builtins
+(@pxref{Bourne Shell Builtins}).
+
+@item
+Bash includes the @code{shopt} builtin, for finer control of shell
+optional capabilities (@pxref{The Shopt Builtin}), and allows these options
+to be set and unset at shell invocation (@pxref{Invoking Bash}).
+
+@item
+Bash has much more optional behavior controllable with the @code{set}
+builtin (@pxref{The Set Builtin}).
+
+@item
+The @samp{-x} (@option{xtrace}) option displays commands other than
+simple commands when performing an execution trace
+(@pxref{The Set Builtin}).
+
+@item
+The @code{test} builtin (@pxref{Bourne Shell Builtins})
+is slightly different, as it implements the @sc{posix} algorithm,
+which specifies the behavior based on the number of arguments.
+
+@item
+Bash includes the @code{caller} builtin, which displays the context of
+any active subroutine call (a shell function or a script executed with
+the @code{.} or @code{source} builtins).  This supports the bash
+debugger.
+
+@item
+The @code{trap} builtin (@pxref{Bourne Shell Builtins}) allows a
+@code{DEBUG} pseudo-signal specification, similar to @code{EXIT}.
+Commands specified with a @code{DEBUG} trap are executed before every
+simple command, @code{for} command, @code{case} command,
+@code{select} command, every arithmetic @code{for} command, and before
+the first command executes in a shell function.
+The @code{DEBUG} trap is not inherited by shell functions unless the
+function has been given the @code{trace} attribute or the
+@code{functrace} option has been enabled using the @code{shopt} builtin.
+The @code{extdebug} shell option has additional effects on the
+@code{DEBUG} trap.
+
+The @code{trap} builtin (@pxref{Bourne Shell Builtins}) allows an
+@code{ERR} pseudo-signal specification, similar to @code{EXIT} and @code{DEBUG}.
+Commands specified with an @code{ERR} trap are executed after a simple
+command fails, with a few exceptions.
+The @code{ERR} trap is not inherited by shell functions unless the
+@code{-o errtrace} option to the @code{set} builtin is enabled.
+
+The @code{trap} builtin (@pxref{Bourne Shell Builtins}) allows a
+@code{RETURN} pseudo-signal specification, similar to
+@code{EXIT} and @code{DEBUG}.
+Commands specified with an @code{RETURN} trap are executed before
+execution resumes after a shell function or a shell script executed with
+@code{.} or @code{source} returns.
+The @code{RETURN} trap is not inherited by shell functions unless the
+function has been given the @code{trace} attribute or the
+@code{functrace} option has been enabled using the @code{shopt} builtin.
+
+@item
+The Bash @code{type} builtin is more extensive and gives more information
+about the names it finds (@pxref{Bash Builtins}).
+
+@item
+The Bash @code{umask} builtin permits a @option{-p} option to cause
+the output to be displayed in the form of a @code{umask} command
+that may be reused as input (@pxref{Bourne Shell Builtins}).
+
+@item
+Bash implements a @code{csh}-like directory stack, and provides the
+@code{pushd}, @code{popd}, and @code{dirs} builtins to manipulate it
+(@pxref{The Directory Stack}).
+Bash also makes the directory stack visible as the value of the
+@env{DIRSTACK} shell variable.
+
+@item
+Bash interprets special backslash-escaped characters in the prompt
+strings when interactive (@pxref{Controlling the Prompt}).
+
+@item
+The Bash restricted mode is more useful (@pxref{The Restricted Shell});
+the SVR4.2 shell restricted mode is too limited.
+
+@item
+The @code{disown} builtin can remove a job from the internal shell
+job table (@pxref{Job Control Builtins}) or suppress the sending
+of @code{SIGHUP} to a job when the shell exits as the result of a
+@code{SIGHUP}.
+
+@item
+Bash includes a number of features to support a separate debugger for
+shell scripts.
+
+@item
+The SVR4.2 shell has two privilege-related builtins
+(@code{mldmode} and @code{priv}) not present in Bash.
+
+@item
+Bash does not have the @code{stop} or @code{newgrp} builtins.
+
+@item
+Bash does not use the @env{SHACCT} variable or perform shell accounting.
+
+@item
+The SVR4.2 @code{sh} uses a @env{TIMEOUT} variable like Bash uses
+@env{TMOUT}.
+
+@end itemize
+
+@noindent
+More features unique to Bash may be found in @ref{Bash Features}.
+
+
+@appendixsec Implementation Differences From The SVR4.2 Shell
+
+Since Bash is a completely new implementation, it does not suffer from
+many of the limitations of the SVR4.2 shell.  For instance:
+
+@itemize @bullet
+
+@item
+Bash does not fork a subshell when redirecting into or out of
+a shell control structure such as  an @code{if} or @code{while}
+statement.
+
+@item
+Bash does not allow unbalanced quotes.  The SVR4.2 shell will silently
+insert a needed closing quote at @code{EOF} under certain circumstances.
+This can be the cause of some hard-to-find errors.
+
+@item
+The SVR4.2 shell uses a baroque memory management scheme based on
+trapping @code{SIGSEGV}.  If the shell is started from a process with
+@code{SIGSEGV} blocked (e.g., by using the @code{system()} C library
+function call), it misbehaves badly.
+
+@item
+In a questionable attempt at security, the SVR4.2 shell,
+when invoked without the @option{-p} option, will alter its real
+and effective @sc{uid} and @sc{gid} if they are less than some
+magic threshold value, commonly 100.
+This can lead to unexpected results.
+
+@item
+The SVR4.2 shell does not allow users to trap @code{SIGSEGV},
+@code{SIGALRM}, or @code{SIGCHLD}.
+
+@item
+The SVR4.2 shell does not allow the @env{IFS}, @env{MAILCHECK},
+@env{PATH}, @env{PS1}, or @env{PS2} variables to be unset.
+
+@item
+The SVR4.2 shell treats @samp{^} as the undocumented equivalent of
+@samp{|}.
+
+@item
+Bash allows multiple option arguments when it is invoked (@code{-x -v});
+the SVR4.2 shell allows only one option argument (@code{-xv}).  In
+fact, some versions of the shell dump core if the second argument begins
+with a @samp{-}.
+
+@item
+The SVR4.2 shell exits a script if any builtin fails; Bash exits
+a script only if one of the @sc{posix} special builtins fails, and
+only for certain failures, as enumerated in the @sc{posix} standard.
+
+@item 
+The SVR4.2 shell behaves differently when invoked as @code{jsh}
+(it turns on job control).
+@end itemize
+
+@node GNU Free Documentation License
+@appendix GNU Free Documentation License
+
+@include fdl.texi
+
+@node Indexes
+@appendix Indexes
+
+@menu
+* Builtin Index::		Index of Bash builtin commands.
+* Reserved Word Index::		Index of Bash reserved words.
+* Variable Index::		Quick reference helps you find the
+				variable you want.
+* Function Index::		Index of bindable Readline functions.
+* Concept Index::		General index for concepts described in
+				this manual.
+@end menu
+
+@node Builtin Index
+@appendixsec Index of Shell Builtin Commands
+@printindex bt
+
+@node Reserved Word Index
+@appendixsec Index of Shell Reserved Words
+@printindex rw
+
+@node Variable Index
+@appendixsec Parameter and Variable Index
+@printindex vr
+
+@node Function Index
+@appendixsec Function Index
+@printindex fn
+
+@node Concept Index
+@appendixsec Concept Index
+@printindex cp
+
+@bye
diff --git a/doc/builtins.0 b/doc/builtins.0
new file mode 100644
index 0000000..614524e
--- /dev/null
+++ b/doc/builtins.0
@@ -0,0 +1,2014 @@
+BASH_BUILTINS(1)            General Commands Manual           BASH_BUILTINS(1)
+
+
+
+NNAAMMEE
+       bash,  :,  .,  [, alias, bg, bind, break, builtin, caller, cd, command,
+       compgen, complete, compopt, continue, declare, dirs, disown, echo,  en-
+       able,  eval,  exec,  exit,  export, false, fc, fg, getopts, hash, help,
+       history, jobs, kill, let, local, logout, mapfile, popd, printf,  pushd,
+       pwd,  read, readonly, return, set, shift, shopt, source, suspend, test,
+       times, trap, true, type, typeset, ulimit, umask, unalias, unset, wait -
+       bash built-in commands, see bbaasshh(1)
+
+BBAASSHH BBUUIILLTTIINN CCOOMMMMAANNDDSS
+       Unless otherwise noted, each builtin command documented in this section
+       as accepting options preceded by -- accepts ---- to signify the end of the
+       options.  The ::, ttrruuee, ffaallssee, and tteesstt/[[ builtins do not accept options
+       and do not treat ---- specially.  The eexxiitt, llooggoouutt, rreettuurrnn,  bbrreeaakk,  ccoonn--
+       ttiinnuuee,  lleett,  and sshhiifftt builtins accept and process arguments beginning
+       with -- without requiring ----.  Other builtins that accept arguments  but
+       are  not  specified  as accepting options interpret arguments beginning
+       with -- as invalid options and require ---- to  prevent  this  interpreta-
+       tion.
+       :: [_a_r_g_u_m_e_n_t_s]
+              No  effect;  the command does nothing beyond expanding _a_r_g_u_m_e_n_t_s
+              and performing any specified redirections.  The return status is
+              zero.
+
+        ..  _f_i_l_e_n_a_m_e [_a_r_g_u_m_e_n_t_s]
+       ssoouurrccee _f_i_l_e_n_a_m_e [_a_r_g_u_m_e_n_t_s]
+              Read and execute commands from _f_i_l_e_n_a_m_e in the current shell en-
+              vironment and return the exit status of the  last  command  exe-
+              cuted  from  _f_i_l_e_n_a_m_e.   If  _f_i_l_e_n_a_m_e  does not contain a slash,
+              filenames in PPAATTHH are used  to  find  the  directory  containing
+              _f_i_l_e_n_a_m_e.  The file searched for in PPAATTHH need not be executable.
+              When bbaasshh is  not  in  _p_o_s_i_x  _m_o_d_e,  the  current  directory  is
+              searched  if no file is found in PPAATTHH.  If the ssoouurrcceeppaatthh option
+              to the sshhoopptt builtin command is turned  off,  the  PPAATTHH  is  not
+              searched.   If any _a_r_g_u_m_e_n_t_s are supplied, they become the posi-
+              tional parameters when _f_i_l_e_n_a_m_e is executed.  Otherwise the  po-
+              sitional parameters are unchanged.  If the --TT option is enabled,
+              ssoouurrccee inherits any trap on DDEEBBUUGG; if it is not, any DDEEBBUUGG  trap
+              string  is  saved  and  restored  around the call to ssoouurrccee, and
+              ssoouurrccee unsets the DDEEBBUUGG trap while it executes.  If  --TT  is  not
+              set,  and the sourced file changes the DDEEBBUUGG trap, the new value
+              is retained when ssoouurrccee completes.  The  return  status  is  the
+              status  of  the  last  command exited within the script (0 if no
+              commands are executed), and false if _f_i_l_e_n_a_m_e is  not  found  or
+              cannot be read.
+
+       aalliiaass [--pp] [_n_a_m_e[=_v_a_l_u_e] ...]
+              AAlliiaass with no arguments or with the --pp option prints the list of
+              aliases in the form aalliiaass _n_a_m_e=_v_a_l_u_e on standard  output.   When
+              arguments  are supplied, an alias is defined for each _n_a_m_e whose
+              _v_a_l_u_e is given.  A trailing space in _v_a_l_u_e causes the next  word
+              to be checked for alias substitution when the alias is expanded.
+              For each _n_a_m_e in the argument list for which no  _v_a_l_u_e  is  sup-
+              plied,  the  name  and value of the alias is printed.  AAlliiaass re-
+              turns true unless a _n_a_m_e is given for which no  alias  has  been
+              defined.
+
+       bbgg [_j_o_b_s_p_e_c ...]
+              Resume  each  suspended  job _j_o_b_s_p_e_c in the background, as if it
+              had been started with &&.  If _j_o_b_s_p_e_c is not present, the shell's
+              notion  of the _c_u_r_r_e_n_t _j_o_b is used.  bbgg _j_o_b_s_p_e_c returns 0 unless
+              run when job control is disabled or, when run with  job  control
+              enabled,  any  specified  _j_o_b_s_p_e_c  was  not found or was started
+              without job control.
+
+       bbiinndd [--mm _k_e_y_m_a_p] [--llppssvvPPSSVVXX]
+       bbiinndd [--mm _k_e_y_m_a_p] [--qq _f_u_n_c_t_i_o_n] [--uu _f_u_n_c_t_i_o_n] [--rr _k_e_y_s_e_q]
+       bbiinndd [--mm _k_e_y_m_a_p] --ff _f_i_l_e_n_a_m_e
+       bbiinndd [--mm _k_e_y_m_a_p] --xx _k_e_y_s_e_q:_s_h_e_l_l_-_c_o_m_m_a_n_d
+       bbiinndd [--mm _k_e_y_m_a_p] _k_e_y_s_e_q:_f_u_n_c_t_i_o_n_-_n_a_m_e
+       bbiinndd [--mm _k_e_y_m_a_p] _k_e_y_s_e_q:_r_e_a_d_l_i_n_e_-_c_o_m_m_a_n_d
+              Display current rreeaaddlliinnee key and function bindings, bind  a  key
+              sequence  to  a  rreeaaddlliinnee  function  or macro, or set a rreeaaddlliinnee
+              variable.  Each non-option argument is a command as it would ap-
+              pear  in _._i_n_p_u_t_r_c, but each binding or command must be passed as
+              a separate argument; e.g., '"\C-x\C-r": re-read-init-file'.  Op-
+              tions, if supplied, have the following meanings:
+              --mm _k_e_y_m_a_p
+                     Use _k_e_y_m_a_p as the keymap to be affected by the subsequent
+                     bindings.  Acceptable _k_e_y_m_a_p names are _e_m_a_c_s_, _e_m_a_c_s_-_s_t_a_n_-
+                     _d_a_r_d_,  _e_m_a_c_s_-_m_e_t_a_,  _e_m_a_c_s_-_c_t_l_x_,  _v_i_, _v_i_-_m_o_v_e_, _v_i_-_c_o_m_m_a_n_d,
+                     and _v_i_-_i_n_s_e_r_t.  _v_i is equivalent to  _v_i_-_c_o_m_m_a_n_d  (_v_i_-_m_o_v_e
+                     is  also  a  synonym); _e_m_a_c_s is equivalent to _e_m_a_c_s_-_s_t_a_n_-
+                     _d_a_r_d.
+              --ll     List the names of all rreeaaddlliinnee functions.
+              --pp     Display rreeaaddlliinnee function names and bindings  in  such  a
+                     way that they can be re-read.
+              --PP     List current rreeaaddlliinnee function names and bindings.
+              --ss     Display  rreeaaddlliinnee  key  sequences bound to macros and the
+                     strings they output in such a way that they  can  be  re-
+                     read.
+              --SS     Display  rreeaaddlliinnee  key  sequences bound to macros and the
+                     strings they output.
+              --vv     Display rreeaaddlliinnee variable names and values in such a  way
+                     that they can be re-read.
+              --VV     List current rreeaaddlliinnee variable names and values.
+              --ff _f_i_l_e_n_a_m_e
+                     Read key bindings from _f_i_l_e_n_a_m_e.
+              --qq _f_u_n_c_t_i_o_n
+                     Query about which keys invoke the named _f_u_n_c_t_i_o_n.
+              --uu _f_u_n_c_t_i_o_n
+                     Unbind all keys bound to the named _f_u_n_c_t_i_o_n.
+              --rr _k_e_y_s_e_q
+                     Remove any current binding for _k_e_y_s_e_q.
+              --xx _k_e_y_s_e_q::_s_h_e_l_l_-_c_o_m_m_a_n_d
+                     Cause _s_h_e_l_l_-_c_o_m_m_a_n_d to be executed whenever _k_e_y_s_e_q is en-
+                     tered.  When _s_h_e_l_l_-_c_o_m_m_a_n_d is executed,  the  shell  sets
+                     the  RREEAADDLLIINNEE__LLIINNEE  variable to the contents of the rreeaadd--
+                     lliinnee line buffer and the RREEAADDLLIINNEE__PPOOIINNTT and RREEAADDLLIINNEE__MMAARRKK
+                     variables  to the current location of the insertion point
+                     and the saved insertion point (the  mark),  respectively.
+                     If the executed command changes the value of any of RREEAADD--
+                     LLIINNEE__LLIINNEE, RREEAADDLLIINNEE__PPOOIINNTT, or  RREEAADDLLIINNEE__MMAARRKK,  those  new
+                     values will be reflected in the editing state.
+              --XX     List  all  key  sequences bound to shell commands and the
+                     associated commands in a format that can be reused as in-
+                     put.
+
+              The  return value is 0 unless an unrecognized option is given or
+              an error occurred.
+
+       bbrreeaakk [_n]
+              Exit from within a ffoorr, wwhhiillee, uunnttiill, or sseelleecctt loop.  If  _n  is
+              specified,  break  _n  levels.   _n must be >= 1.  If _n is greater
+              than the number of enclosing loops, all enclosing loops are  ex-
+              ited.   The  return  value  is 0 unless _n is not greater than or
+              equal to 1.
+
+       bbuuiillttiinn _s_h_e_l_l_-_b_u_i_l_t_i_n [_a_r_g_u_m_e_n_t_s]
+              Execute the specified shell builtin, passing it  _a_r_g_u_m_e_n_t_s,  and
+              return its exit status.  This is useful when defining a function
+              whose name is the same as a shell builtin, retaining  the  func-
+              tionality of the builtin within the function.  The ccdd builtin is
+              commonly redefined this way.  The  return  status  is  false  if
+              _s_h_e_l_l_-_b_u_i_l_t_i_n is not a shell builtin command.
+
+       ccaalllleerr [_e_x_p_r]
+              Returns the context of any active subroutine call (a shell func-
+              tion or a script executed with the .. or ssoouurrccee builtins).  With-
+              out _e_x_p_r, ccaalllleerr displays the line number and source filename of
+              the current subroutine call.  If a non-negative integer is  sup-
+              plied as _e_x_p_r, ccaalllleerr displays the line number, subroutine name,
+              and source file corresponding to that position  in  the  current
+              execution  call  stack.  This extra information may be used, for
+              example, to print a stack trace.  The current frame is frame  0.
+              The  return  value is 0 unless the shell is not executing a sub-
+              routine call or _e_x_p_r does not correspond to a valid position  in
+              the call stack.
+
+       ccdd [--LL|[--PP [--ee]] [-@]] [_d_i_r]
+              Change  the  current  directory to _d_i_r.  if _d_i_r is not supplied,
+              the value of the HHOOMMEE shell variable is the default.  Any  addi-
+              tional arguments following _d_i_r are ignored.  The variable CCDDPPAATTHH
+              defines the search path for the directory containing  _d_i_r:  each
+              directory  name  in CCDDPPAATTHH is searched for _d_i_r.  Alternative di-
+              rectory names in CCDDPPAATTHH are separated by a colon  (:).   A  null
+              directory  name  in CCDDPPAATTHH is the same as the current directory,
+              i.e., ``..''.  If _d_i_r begins with a slash (/), then CCDDPPAATTHH is not
+              used.   The  --PP  option  causes ccdd to use the physical directory
+              structure by resolving symbolic links while traversing  _d_i_r  and
+              before processing instances of _._. in _d_i_r (see also the --PP option
+              to the sseett builtin command); the --LL option forces symbolic links
+              to  be followed by resolving the link after processing instances
+              of _._. in _d_i_r.  If _._. appears in _d_i_r, it is processed by removing
+              the  immediately previous pathname component from _d_i_r, back to a
+              slash or the beginning of _d_i_r.  If the  --ee  option  is  supplied
+              with  --PP,  and  the current working directory cannot be success-
+              fully determined after a successful directory  change,  ccdd  will
+              return  an unsuccessful status.  On systems that support it, the
+              --@@ option presents the extended  attributes  associated  with  a
+              file  as  a directory.  An argument of -- is converted to $$OOLLDDPPWWDD
+              before the directory change is attempted.  If a non-empty direc-
+              tory  name  from  CCDDPPAATTHH is used, or if -- is the first argument,
+              and the directory change is successful, the absolute pathname of
+              the  new  working  directory  is written to the standard output.
+              The return value is  true  if  the  directory  was  successfully
+              changed; false otherwise.
+
+       ccoommmmaanndd [--ppVVvv] _c_o_m_m_a_n_d [_a_r_g ...]
+              Run  _c_o_m_m_a_n_d  with  _a_r_g_s  suppressing  the normal shell function
+              lookup.  Only builtin commands or commands found in the PPAATTHH are
+              executed.   If the --pp option is given, the search for _c_o_m_m_a_n_d is
+              performed using a default value for PPAATTHH that is  guaranteed  to
+              find  all of the standard utilities.  If either the --VV or --vv op-
+              tion is supplied, a description of _c_o_m_m_a_n_d is printed.   The  --vv
+              option  causes  a single word indicating the command or filename
+              used to invoke _c_o_m_m_a_n_d to be displayed; the --VV option produces a
+              more  verbose  description.  If the --VV or --vv option is supplied,
+              the exit status is 0 if _c_o_m_m_a_n_d was found, and  1  if  not.   If
+              neither option is supplied and an error occurred or _c_o_m_m_a_n_d can-
+              not be found, the exit status is 127.  Otherwise, the exit  sta-
+              tus of the ccoommmmaanndd builtin is the exit status of _c_o_m_m_a_n_d.
+
+       ccoommppggeenn [_o_p_t_i_o_n] [_w_o_r_d]
+              Generate  possible  completion matches for _w_o_r_d according to the
+              _o_p_t_i_o_ns, which may  be  any  option  accepted  by  the  ccoommpplleettee
+              builtin  with  the exception of --pp and --rr, and write the matches
+              to the standard output.  When using the --FF or  --CC  options,  the
+              various  shell  variables set by the programmable completion fa-
+              cilities, while available, will not have useful values.
+
+              The matches will be generated in the same way as if the program-
+              mable completion code had generated them directly from a comple-
+              tion specification with the same flags.  If _w_o_r_d  is  specified,
+              only those completions matching _w_o_r_d will be displayed.
+
+              The  return  value is true unless an invalid option is supplied,
+              or no matches were generated.
+
+       ccoommpplleettee [--aabbccddeeffggjjkkssuuvv] [--oo _c_o_m_p_-_o_p_t_i_o_n] [--DDEEII] [--AA _a_c_t_i_o_n] [--GG  _g_l_o_b_-
+       _p_a_t] [--WW _w_o_r_d_l_i_s_t]
+              [--FF  _f_u_n_c_t_i_o_n]  [--CC _c_o_m_m_a_n_d] [--XX _f_i_l_t_e_r_p_a_t] [--PP _p_r_e_f_i_x] [--SS _s_u_f_-
+              _f_i_x] _n_a_m_e [_n_a_m_e _._._.]
+       ccoommpplleettee --pprr [--DDEEII] [_n_a_m_e ...]
+              Specify how arguments to each _n_a_m_e should be completed.  If  the
+              --pp  option  is supplied, or if no options are supplied, existing
+              completion specifications are printed in a way that allows  them
+              to be reused as input.  The --rr option removes a completion spec-
+              ification for each _n_a_m_e, or, if no _n_a_m_es are supplied, all  com-
+              pletion specifications.  The --DD option indicates that other sup-
+              plied options and actions should apply to the  ``default''  com-
+              mand  completion; that is, completion attempted on a command for
+              which no completion has previously been defined.  The --EE  option
+              indicates  that  other supplied options and actions should apply
+              to ``empty'' command completion; that is,  completion  attempted
+              on  a  blank  line.  The --II option indicates that other supplied
+              options and actions should apply to completion  on  the  initial
+              non-assignment  word  on  the line, or after a command delimiter
+              such as ;; or ||, which is usually command  name  completion.   If
+              multiple  options  are  supplied, the --DD option takes precedence
+              over --EE, and both take precedence over --II.  If any of --DD, --EE, or
+              --II  are  supplied,  any  other _n_a_m_e arguments are ignored; these
+              completions only apply to the case specified by the option.
+
+              The process of applying  these  completion  specifications  when
+              word  completion  is attempted is described above under PPrrooggrraamm--
+              mmaabbllee CCoommpplleettiioonn.
+
+              Other options, if specified, have the following  meanings.   The
+              arguments  to the --GG, --WW, and --XX options (and, if necessary, the
+              --PP and --SS options) should be quoted to protect them from  expan-
+              sion before the ccoommpplleettee builtin is invoked.
+              --oo _c_o_m_p_-_o_p_t_i_o_n
+                      The  _c_o_m_p_-_o_p_t_i_o_n  controls  several aspects of the comp-
+                      spec's behavior beyond the simple generation of  comple-
+                      tions.  _c_o_m_p_-_o_p_t_i_o_n may be one of:
+                      bbaasshhddeeffaauulltt
+                              Perform the rest of the default bbaasshh completions
+                              if the compspec generates no matches.
+                      ddeeffaauulltt Use readline's default  filename  completion  if
+                              the compspec generates no matches.
+                      ddiirrnnaammeess
+                              Perform  directory  name completion if the comp-
+                              spec generates no matches.
+                      ffiilleennaammeess
+                              Tell readline that the compspec generates  file-
+                              names,  so  it can perform any filename-specific
+                              processing (like adding  a  slash  to  directory
+                              names,  quoting special characters, or suppress-
+                              ing trailing spaces).  Intended to be used  with
+                              shell functions.
+                      nnooqquuoottee Tell  readline  not to quote the completed words
+                              if they are filenames (quoting filenames is  the
+                              default).
+                      nnoossoorrtt  Tell  readline  not to sort the list of possible
+                              completions alphabetically.
+                      nnoossppaaccee Tell readline not to append  a  space  (the  de-
+                              fault)  to  words  completed  at  the end of the
+                              line.
+                      pplluussddiirrss
+                              After any matches defined by  the  compspec  are
+                              generated,  directory  name  completion  is  at-
+                              tempted and any matches are added to the results
+                              of the other actions.
+              --AA _a_c_t_i_o_n
+                      The  _a_c_t_i_o_n  may  be  one of the following to generate a
+                      list of possible completions:
+                      aalliiaass   Alias names.  May also be specified as --aa.
+                      aarrrraayyvvaarr
+                              Array variable names.
+                      bbiinnddiinngg RReeaaddlliinnee key binding names.
+                      bbuuiillttiinn Names of shell builtin commands.   May  also  be
+                              specified as --bb.
+                      ccoommmmaanndd Command names.  May also be specified as --cc.
+                      ddiirreeccttoorryy
+                              Directory names.  May also be specified as --dd.
+                      ddiissaabblleedd
+                              Names of disabled shell builtins.
+                      eennaabblleedd Names of enabled shell builtins.
+                      eexxppoorrtt  Names  of exported shell variables.  May also be
+                              specified as --ee.
+                      ffiillee    File names.  May also be specified as --ff.
+                      ffuunnccttiioonn
+                              Names of shell functions.
+                      ggrroouupp   Group names.  May also be specified as --gg.
+                      hheellppttooppiicc
+                              Help topics as accepted by the hheellpp builtin.
+                      hhoossttnnaammee
+                              Hostnames, as taken from the file  specified  by
+                              the HHOOSSTTFFIILLEE shell variable.
+                      jjoobb     Job  names,  if job control is active.  May also
+                              be specified as --jj.
+                      kkeeyywwoorrdd Shell reserved words.  May also be specified  as
+                              --kk.
+                      rruunnnniinngg Names of running jobs, if job control is active.
+                      sseerrvviiccee Service names.  May also be specified as --ss.
+                      sseettoopptt  Valid  arguments  for  the  --oo option to the sseett
+                              builtin.
+                      sshhoopptt   Shell option names  as  accepted  by  the  sshhoopptt
+                              builtin.
+                      ssiiggnnaall  Signal names.
+                      ssttooppppeedd Names of stopped jobs, if job control is active.
+                      uusseerr    User names.  May also be specified as --uu.
+                      vvaarriiaabbllee
+                              Names of all shell variables.  May also be spec-
+                              ified as --vv.
+              --CC _c_o_m_m_a_n_d
+                      _c_o_m_m_a_n_d is executed in a subshell environment,  and  its
+                      output is used as the possible completions.
+              --FF _f_u_n_c_t_i_o_n
+                      The  shell  function _f_u_n_c_t_i_o_n is executed in the current
+                      shell environment.  When the function is  executed,  the
+                      first argument ($$11) is the name of the command whose ar-
+                      guments are being completed, the second argument ($$22) is
+                      the word being completed, and the third argument ($$33) is
+                      the word preceding the word being completed on the  cur-
+                      rent  command line.  When it finishes, the possible com-
+                      pletions are retrieved from the value of  the  CCOOMMPPRREEPPLLYY
+                      array variable.
+              --GG _g_l_o_b_p_a_t
+                      The  pathname  expansion  pattern _g_l_o_b_p_a_t is expanded to
+                      generate the possible completions.
+              --PP _p_r_e_f_i_x
+                      _p_r_e_f_i_x is added at the beginning of each  possible  com-
+                      pletion after all other options have been applied.
+              --SS _s_u_f_f_i_x
+                      _s_u_f_f_i_x is appended to each possible completion after all
+                      other options have been applied.
+              --WW _w_o_r_d_l_i_s_t
+                      The _w_o_r_d_l_i_s_t is split using the characters  in  the  IIFFSS
+                      special  variable as delimiters, and each resultant word
+                      is expanded.  Shell quoting is honored within  _w_o_r_d_l_i_s_t,
+                      in order to provide a mechanism for the words to contain
+                      shell metacharacters or characters in the value of  IIFFSS.
+                      The  possible  completions are the members of the resul-
+                      tant list which match the word being completed.
+              --XX _f_i_l_t_e_r_p_a_t
+                      _f_i_l_t_e_r_p_a_t is a pattern as used for  pathname  expansion.
+                      It is applied to the list of possible completions gener-
+                      ated by the preceding options and  arguments,  and  each
+                      completion  matching _f_i_l_t_e_r_p_a_t is removed from the list.
+                      A leading !! in _f_i_l_t_e_r_p_a_t negates the  pattern;  in  this
+                      case, any completion not matching _f_i_l_t_e_r_p_a_t is removed.
+
+              The  return  value is true unless an invalid option is supplied,
+              an option other than --pp or --rr is supplied without a  _n_a_m_e  argu-
+              ment,  an  attempt  is made to remove a completion specification
+              for a _n_a_m_e for which no specification exists, or an error occurs
+              adding a completion specification.
+
+       ccoommppoopptt [--oo _o_p_t_i_o_n] [--DDEEII] [++oo _o_p_t_i_o_n] [_n_a_m_e]
+              Modify  completion  options  for  each _n_a_m_e according to the _o_p_-
+              _t_i_o_ns, or for the currently-executing completion if no _n_a_m_es are
+              supplied.   If  no _o_p_t_i_o_ns are given, display the completion op-
+              tions for each _n_a_m_e or the  current  completion.   The  possible
+              values  of  _o_p_t_i_o_n  are those valid for the ccoommpplleettee builtin de-
+              scribed above.  The --DD option indicates that other supplied  op-
+              tions  should  apply to the ``default'' command completion; that
+              is, completion attempted on a command for  which  no  completion
+              has previously been defined.  The --EE option indicates that other
+              supplied options should apply to ``empty''  command  completion;
+              that  is,  completion  attempted on a blank line.  The --II option
+              indicates that other supplied options should apply to completion
+              on  the initial non-assignment word on the line, or after a com-
+              mand delimiter such as ;; or ||, which  is  usually  command  name
+              completion.
+
+              The  return  value is true unless an invalid option is supplied,
+              an attempt is made to modify the options for a _n_a_m_e for which no
+              completion specification exists, or an output error occurs.
+
+       ccoonnttiinnuuee [_n]
+              Resume the next iteration of the enclosing ffoorr, wwhhiillee, uunnttiill, or
+              sseelleecctt loop.  If _n is specified, resume  at  the  _nth  enclosing
+              loop.   _n  must be >= 1.  If _n is greater than the number of en-
+              closing loops, the last enclosing loop (the ``top-level''  loop)
+              is  resumed.  The return value is 0 unless _n is not greater than
+              or equal to 1.
+
+       ddeeccllaarree [--aaAAffFFggiiIIllnnrrttuuxx] [--pp] [_n_a_m_e[=_v_a_l_u_e] ...]
+       ttyyppeesseett [--aaAAffFFggiiIIllnnrrttuuxx] [--pp] [_n_a_m_e[=_v_a_l_u_e] ...]
+              Declare variables and/or give them attributes.  If no _n_a_m_es  are
+              given  then display the values of variables.  The --pp option will
+              display the attributes and values of each _n_a_m_e.  When --pp is used
+              with  _n_a_m_e  arguments, additional options, other than --ff and --FF,
+              are ignored.  When --pp is supplied  without  _n_a_m_e  arguments,  it
+              will  display  the attributes and values of all variables having
+              the attributes specified by the additional options.  If no other
+              options  are  supplied  with  --pp,  ddeeccllaarree  will display the at-
+              tributes and values of all shell variables.  The --ff option  will
+              restrict the display to shell functions.  The --FF option inhibits
+              the display of function definitions; only the function name  and
+              attributes are printed.  If the eexxttddeebbuugg shell option is enabled
+              using sshhoopptt, the source file name and  line  number  where  each
+              _n_a_m_e  is  defined  are displayed as well.  The --FF option implies
+              --ff.  The --gg option forces variables to be created or modified at
+              the global scope, even when ddeeccllaarree is executed in a shell func-
+              tion.  It is ignored in all other cases.  The --II  option  causes
+              local  variables  to  inherit the attributes (except the _n_a_m_e_r_e_f
+              attribute) and value of any existing variable with the same _n_a_m_e
+              at  a  surrounding scope.  If there is no existing variable, the
+              local variable is initially unset.  The following options can be
+              used  to  restrict output to variables with the specified attri-
+              bute or to give variables attributes:
+              --aa     Each _n_a_m_e  is  an  indexed  array  variable  (see  AArrrraayyss
+                     above).
+              --AA     Each  _n_a_m_e  is  an associative array variable (see AArrrraayyss
+                     above).
+              --ff     Use function names only.
+              --ii     The variable is treated as an integer; arithmetic evalua-
+                     tion  (see AARRIITTHHMMEETTIICC EEVVAALLUUAATTIIOONN above) is performed when
+                     the variable is assigned a value.
+              --ll     When the variable is assigned  a  value,  all  upper-case
+                     characters  are  converted to lower-case.  The upper-case
+                     attribute is disabled.
+              --nn     Give each _n_a_m_e the _n_a_m_e_r_e_f attribute, making  it  a  name
+                     reference  to  another  variable.  That other variable is
+                     defined by the value of _n_a_m_e.   All  references,  assign-
+                     ments,  and attribute modifications to _n_a_m_e, except those
+                     using or changing the --nn attribute itself, are  performed
+                     on  the variable referenced by _n_a_m_e's value.  The nameref
+                     attribute cannot be applied to array variables.
+              --rr     Make _n_a_m_es readonly.  These names cannot then be assigned
+                     values by subsequent assignment statements or unset.
+              --tt     Give each _n_a_m_e the _t_r_a_c_e attribute.  Traced functions in-
+                     herit the DDEEBBUUGG and RREETTUURRNN traps from the calling  shell.
+                     The trace attribute has no special meaning for variables.
+              --uu     When  the  variable  is  assigned a value, all lower-case
+                     characters are converted to upper-case.   The  lower-case
+                     attribute is disabled.
+              --xx     Mark  _n_a_m_es for export to subsequent commands via the en-
+                     vironment.
+
+              Using `+' instead of `-' turns off the attribute  instead,  with
+              the  exceptions  that ++aa and ++AA may not be used to destroy array
+              variables and ++rr will not remove the readonly  attribute.   When
+              used in a function, ddeeccllaarree and ttyyppeesseett make each _n_a_m_e local, as
+              with the llooccaall command, unless the --gg option is supplied.  If  a
+              variable  name  is followed by =_v_a_l_u_e, the value of the variable
+              is set to _v_a_l_u_e.  When using --aa or --AA and the  compound  assign-
+              ment  syntax to create array variables, additional attributes do
+              not take effect until subsequent assignments.  The return  value
+              is 0 unless an invalid option is encountered, an attempt is made
+              to define a function using ``-f foo=bar'', an attempt is made to
+              assign a value to a readonly variable, an attempt is made to as-
+              sign a value to an array variable without using the compound as-
+              signment  syntax  (see  AArrrraayyss above), one of the _n_a_m_e_s is not a
+              valid shell variable name, an attempt is made to turn off  read-
+              only  status for a readonly variable, an attempt is made to turn
+              off array status for an array variable, or an attempt is made to
+              display a non-existent function with --ff.
+
+       ddiirrss [[--ccllppvv]] [[++_n]] [[--_n]]
+              Without  options,  displays the list of currently remembered di-
+              rectories.  The default display is on a single line with  direc-
+              tory  names  separated  by spaces.  Directories are added to the
+              list with the ppuusshhdd command; the ppooppdd  command  removes  entries
+              from the list.  The current directory is always the first direc-
+              tory in the stack.
+              --cc     Clears the directory stack by deleting  all  of  the  en-
+                     tries.
+              --ll     Produces  a  listing  using  full  pathnames; the default
+                     listing format uses a tilde to denote the home directory.
+              --pp     Print the directory stack with one entry per line.
+              --vv     Print the directory stack with one entry per  line,  pre-
+                     fixing each entry with its index in the stack.
+              ++_n     Displays the _nth entry counting from the left of the list
+                     shown by ddiirrss when invoked without options, starting with
+                     zero.
+              --_n     Displays  the  _nth  entry  counting from the right of the
+                     list shown by ddiirrss when invoked without options, starting
+                     with zero.
+
+              The  return value is 0 unless an invalid option is supplied or _n
+              indexes beyond the end of the directory stack.
+
+       ddiissoowwnn [--aarr] [--hh] [_j_o_b_s_p_e_c ... | _p_i_d ... ]
+              Without options, remove each _j_o_b_s_p_e_c from the  table  of  active
+              jobs.   If _j_o_b_s_p_e_c is not present, and neither the --aa nor the --rr
+              option is supplied, the _c_u_r_r_e_n_t _j_o_b is used.  If the  --hh  option
+              is  given,  each  _j_o_b_s_p_e_c  is not removed from the table, but is
+              marked so that SSIIGGHHUUPP is not sent to the job if  the  shell  re-
+              ceives a SSIIGGHHUUPP.  If no _j_o_b_s_p_e_c is supplied, the --aa option means
+              to remove or mark all jobs; the --rr option without a _j_o_b_s_p_e_c  ar-
+              gument restricts operation to running jobs.  The return value is
+              0 unless a _j_o_b_s_p_e_c does not specify a valid job.
+
+       eecchhoo [--nneeEE] [_a_r_g ...]
+              Output the _a_r_gs, separated by spaces,  followed  by  a  newline.
+              The  return  status  is 0 unless a write error occurs.  If --nn is
+              specified, the trailing newline is suppressed.  If the --ee option
+              is  given,  interpretation  of  the  following backslash-escaped
+              characters is enabled.  The --EE option disables  the  interpreta-
+              tion  of these escape characters, even on systems where they are
+              interpreted by default.  The xxppgg__eecchhoo shell option may  be  used
+              to  dynamically  determine whether or not eecchhoo expands these es-
+              cape characters by default.  eecchhoo does not interpret ---- to  mean
+              the  end  of  options.  eecchhoo interprets the following escape se-
+              quences:
+              \\aa     alert (bell)
+              \\bb     backspace
+              \\cc     suppress further output
+              \\ee
+              \\EE     an escape character
+              \\ff     form feed
+              \\nn     new line
+              \\rr     carriage return
+              \\tt     horizontal tab
+              \\vv     vertical tab
+              \\\\     backslash
+              \\00_n_n_n  the eight-bit character whose value is  the  octal  value
+                     _n_n_n (zero to three octal digits)
+              \\xx_H_H   the  eight-bit  character  whose value is the hexadecimal
+                     value _H_H (one or two hex digits)
+              \\uu_H_H_H_H the Unicode (ISO/IEC 10646) character whose value is  the
+                     hexadecimal value _H_H_H_H (one to four hex digits)
+              \\UU_H_H_H_H_H_H_H_H
+                     the  Unicode (ISO/IEC 10646) character whose value is the
+                     hexadecimal value _H_H_H_H_H_H_H_H (one to eight hex digits)
+
+       eennaabbllee [--aa] [--ddnnppss] [--ff _f_i_l_e_n_a_m_e] [_n_a_m_e ...]
+              Enable and disable builtin shell commands.  Disabling a  builtin
+              allows a disk command which has the same name as a shell builtin
+              to be executed without specifying a full pathname,  even  though
+              the  shell  normally searches for builtins before disk commands.
+              If --nn is used, each _n_a_m_e is disabled; otherwise, _n_a_m_e_s  are  en-
+              abled.   For  example, to use the tteesstt binary found via the PPAATTHH
+              instead of the shell builtin version, run  ``enable  -n  test''.
+              The  --ff  option  means to load the new builtin command _n_a_m_e from
+              shared object _f_i_l_e_n_a_m_e, on systems that support dynamic loading.
+              The  --dd  option will delete a builtin previously loaded with --ff.
+              If no _n_a_m_e arguments are given, or if the --pp option is supplied,
+              a list of shell builtins is printed.  With no other option argu-
+              ments, the list consists of all enabled shell builtins.   If  --nn
+              is  supplied, only disabled builtins are printed.  If --aa is sup-
+              plied, the list printed includes all builtins, with  an  indica-
+              tion  of whether or not each is enabled.  If --ss is supplied, the
+              output is restricted to the POSIX _s_p_e_c_i_a_l builtins.  The  return
+              value  is  0 unless a _n_a_m_e is not a shell builtin or there is an
+              error loading a new builtin from a shared object.
+
+       eevvaall [_a_r_g ...]
+              The _a_r_gs are read and concatenated together into a  single  com-
+              mand.   This command is then read and executed by the shell, and
+              its exit status is returned as the value of eevvaall.  If there  are
+              no _a_r_g_s, or only null arguments, eevvaall returns 0.
+
+       eexxeecc [--ccll] [--aa _n_a_m_e] [_c_o_m_m_a_n_d [_a_r_g_u_m_e_n_t_s]]
+              If  _c_o_m_m_a_n_d is specified, it replaces the shell.  No new process
+              is created.  The _a_r_g_u_m_e_n_t_s become the arguments to _c_o_m_m_a_n_d.   If
+              the --ll option is supplied, the shell places a dash at the begin-
+              ning of the zeroth argument passed to _c_o_m_m_a_n_d.  This is what _l_o_-
+              _g_i_n(1)  does.   The --cc option causes _c_o_m_m_a_n_d to be executed with
+              an empty environment.  If --aa is supplied, the shell passes  _n_a_m_e
+              as the zeroth argument to the executed command.  If _c_o_m_m_a_n_d can-
+              not be executed for some reason, a non-interactive shell  exits,
+              unless  the  eexxeeccffaaiill shell option is enabled.  In that case, it
+              returns failure.  An interactive shell returns  failure  if  the
+              file  cannot  be  executed.  A subshell exits unconditionally if
+              eexxeecc fails.  If _c_o_m_m_a_n_d is not specified, any redirections  take
+              effect  in  the  current  shell, and the return status is 0.  If
+              there is a redirection error, the return status is 1.
+
+       eexxiitt [_n]
+              Cause the shell to exit with a status of _n.  If  _n  is  omitted,
+              the exit status is that of the last command executed.  A trap on
+              EEXXIITT is executed before the shell terminates.
+
+       eexxppoorrtt [--ffnn] [_n_a_m_e[=_w_o_r_d]] ...
+       eexxppoorrtt --pp
+              The supplied _n_a_m_e_s are marked for automatic export to the  envi-
+              ronment  of subsequently executed commands.  If the --ff option is
+              given, the _n_a_m_e_s refer to functions.  If no _n_a_m_e_s are given,  or
+              if  the  --pp  option is supplied, a list of names of all exported
+              variables is printed.  The --nn option causes the export  property
+              to be removed from each _n_a_m_e.  If a variable name is followed by
+              =_w_o_r_d, the value of the variable is set to _w_o_r_d.  eexxppoorrtt returns
+              an exit status of 0 unless an invalid option is encountered, one
+              of the _n_a_m_e_s is not a valid shell variable name, or --ff  is  sup-
+              plied with a _n_a_m_e that is not a function.
+
+       ffcc [--ee _e_n_a_m_e] [--llnnrr] [_f_i_r_s_t] [_l_a_s_t]
+       ffcc --ss [_p_a_t=_r_e_p] [_c_m_d]
+              The  first  form  selects a range of commands from _f_i_r_s_t to _l_a_s_t
+              from the history list and  displays  or  edits  and  re-executes
+              them.   _F_i_r_s_t  and  _l_a_s_t may be specified as a string (to locate
+              the last command beginning with that string) or as a number  (an
+              index  into the history list, where a negative number is used as
+              an offset from the current command  number).   When  listing,  a
+              _f_i_r_s_t  or  _l_a_s_t of 0 is equivalent to -1 and -0 is equivalent to
+              the current command (usually the ffcc  command);  otherwise  0  is
+              equivalent  to  -1 and -0 is invalid.  If _l_a_s_t is not specified,
+              it is set to the current command for listing (so  that  ``fc  -l
+              -10''  prints  the last 10 commands) and to _f_i_r_s_t otherwise.  If
+              _f_i_r_s_t is not specified, it is set to the  previous  command  for
+              editing and -16 for listing.
+
+              The  --nn option suppresses the command numbers when listing.  The
+              --rr option reverses the order of the commands.  If the --ll  option
+              is  given,  the  commands are listed on standard output.  Other-
+              wise, the editor given by _e_n_a_m_e is invoked on a file  containing
+              those  commands.  If _e_n_a_m_e is not given, the value of the FFCCEEDDIITT
+              variable is used, and the value of EEDDIITTOORR if FFCCEEDDIITT is not  set.
+              If  neither  variable  is set, _v_i is used.  When editing is com-
+              plete, the edited commands are echoed and executed.
+
+              In the second form, _c_o_m_m_a_n_d is re-executed after  each  instance
+              of  _p_a_t  is replaced by _r_e_p.  _C_o_m_m_a_n_d is interpreted the same as
+              _f_i_r_s_t above.  A useful alias to use with this is ``r="fc  -s"'',
+              so  that  typing  ``r  cc'' runs the last command beginning with
+              ``cc'' and typing ``r'' re-executes the last command.
+
+              If the first form is used, the return value is 0 unless  an  in-
+              valid  option  is  encountered  or _f_i_r_s_t or _l_a_s_t specify history
+              lines out of range.  If the --ee option is  supplied,  the  return
+              value is the value of the last command executed or failure if an
+              error occurs with the temporary file of commands.  If the second
+              form  is  used, the return status is that of the command re-exe-
+              cuted, unless _c_m_d does not specify  a  valid  history  line,  in
+              which case ffcc returns failure.
+
+       ffgg [_j_o_b_s_p_e_c]
+              Resume  _j_o_b_s_p_e_c  in the foreground, and make it the current job.
+              If _j_o_b_s_p_e_c is not present, the shell's notion of the _c_u_r_r_e_n_t _j_o_b
+              is  used.   The  return value is that of the command placed into
+              the foreground, or failure if run when job control  is  disabled
+              or, when run with job control enabled, if _j_o_b_s_p_e_c does not spec-
+              ify a valid job or _j_o_b_s_p_e_c specifies  a  job  that  was  started
+              without job control.
+
+       ggeettooppttss _o_p_t_s_t_r_i_n_g _n_a_m_e [_a_r_g _._._.]
+              ggeettooppttss  is used by shell procedures to parse positional parame-
+              ters.  _o_p_t_s_t_r_i_n_g contains the option  characters  to  be  recog-
+              nized;  if a character is followed by a colon, the option is ex-
+              pected to have an argument, which should be separated from it by
+              white  space.  The colon and question mark characters may not be
+              used as option characters.  Each time  it  is  invoked,  ggeettooppttss
+              places  the next option in the shell variable _n_a_m_e, initializing
+              _n_a_m_e if it does not exist, and the index of the next argument to
+              be processed into the variable OOPPTTIINNDD.  OOPPTTIINNDD is initialized to
+              1 each time the shell or a shell script is invoked.  When an op-
+              tion requires an argument, ggeettooppttss places that argument into the
+              variable OOPPTTAARRGG.  The shell does not reset OOPPTTIINNDD automatically;
+              it  must  be  manually  reset  between multiple calls to ggeettooppttss
+              within the same shell invocation if a new set of  parameters  is
+              to be used.
+
+              When the end of options is encountered, ggeettooppttss exits with a re-
+              turn value greater than zero.  OOPPTTIINNDD is set to the index of the
+              first non-option argument, and _n_a_m_e is set to ?.
+
+              ggeettooppttss  normally  parses the positional parameters, but if more
+              arguments are supplied as _a_r_g values, ggeettooppttss parses  those  in-
+              stead.
+
+              ggeettooppttss  can  report errors in two ways.  If the first character
+              of _o_p_t_s_t_r_i_n_g is a colon, _s_i_l_e_n_t error  reporting  is  used.   In
+              normal  operation,  diagnostic messages are printed when invalid
+              options or missing option arguments  are  encountered.   If  the
+              variable  OOPPTTEERRRR  is  set  to  0, no error messages will be dis-
+              played, even if the first character of _o_p_t_s_t_r_i_n_g is not a colon.
+
+              If an invalid option is seen, ggeettooppttss places ? into _n_a_m_e and, if
+              not  silent,  prints  an  error  message  and unsets OOPPTTAARRGG.  If
+              ggeettooppttss is silent, the option character found is placed  in  OOPP--
+              TTAARRGG and no diagnostic message is printed.
+
+              If  a required argument is not found, and ggeettooppttss is not silent,
+              a question mark (??) is placed in _n_a_m_e, OOPPTTAARRGG is  unset,  and  a
+              diagnostic  message  is  printed.   If ggeettooppttss is silent, then a
+              colon (::) is placed in _n_a_m_e and OOPPTTAARRGG  is  set  to  the  option
+              character found.
+
+              ggeettooppttss  returns true if an option, specified or unspecified, is
+              found.  It returns false if the end of options is encountered or
+              an error occurs.
+
+       hhaasshh [--llrr] [--pp _f_i_l_e_n_a_m_e] [--ddtt] [_n_a_m_e]
+              Each time hhaasshh is invoked, the full pathname of the command _n_a_m_e
+              is determined by searching the directories in $$PPAATTHH  and  remem-
+              bered.  Any previously-remembered pathname is discarded.  If the
+              --pp option is supplied, no path search is performed, and _f_i_l_e_n_a_m_e
+              is  used  as  the  full  filename of the command.  The --rr option
+              causes the shell to forget all remembered locations.  The --dd op-
+              tion  causes the shell to forget the remembered location of each
+              _n_a_m_e.  If the --tt option is supplied, the full pathname to  which
+              each  _n_a_m_e  corresponds  is printed.  If multiple _n_a_m_e arguments
+              are supplied with --tt, the _n_a_m_e is printed before the hashed full
+              pathname.  The --ll option causes output to be displayed in a for-
+              mat that may be reused as input.  If no arguments are given,  or
+              if only --ll is supplied, information about remembered commands is
+              printed.  The return status is true unless a _n_a_m_e is  not  found
+              or an invalid option is supplied.
+
+       hheellpp [--ddmmss] [_p_a_t_t_e_r_n]
+              Display  helpful information about builtin commands.  If _p_a_t_t_e_r_n
+              is specified, hheellpp gives detailed help on all commands  matching
+              _p_a_t_t_e_r_n;  otherwise  help for all the builtins and shell control
+              structures is printed.
+              --dd     Display a short description of each _p_a_t_t_e_r_n
+              --mm     Display the description of each _p_a_t_t_e_r_n in a manpage-like
+                     format
+              --ss     Display only a short usage synopsis for each _p_a_t_t_e_r_n
+
+              The return status is 0 unless no command matches _p_a_t_t_e_r_n.
+
+       hhiissttoorryy [[_n]]
+       hhiissttoorryy --cc
+       hhiissttoorryy --dd _o_f_f_s_e_t
+       hhiissttoorryy --dd _s_t_a_r_t-_e_n_d
+       hhiissttoorryy --aannrrww [_f_i_l_e_n_a_m_e]
+       hhiissttoorryy --pp _a_r_g [_a_r_g _._._.]
+       hhiissttoorryy --ss _a_r_g [_a_r_g _._._.]
+              With no options, display the command history list with line num-
+              bers.  Lines listed with a ** have been modified.  An argument of
+              _n  lists only the last _n lines.  If the shell variable HHIISSTTTTIIMMEE--
+              FFOORRMMAATT is set and not null, it is used as a  format  string  for
+              _s_t_r_f_t_i_m_e(3)  to display the time stamp associated with each dis-
+              played history entry.  No intervening blank is  printed  between
+              the  formatted  time stamp and the history line.  If _f_i_l_e_n_a_m_e is
+              supplied, it is used as the name of the history  file;  if  not,
+              the  value  of HHIISSTTFFIILLEE is used.  Options, if supplied, have the
+              following meanings:
+              --cc     Clear the history list by deleting all the entries.
+              --dd _o_f_f_s_e_t
+                     Delete the history entry at position _o_f_f_s_e_t.   If  _o_f_f_s_e_t
+                     is negative, it is interpreted as relative to one greater
+                     than the last history position, so negative indices count
+                     back  from  the  end  of  the history, and an index of -1
+                     refers to the current hhiissttoorryy --dd command.
+              --dd _s_t_a_r_t-_e_n_d
+                     Delete the history entries between  positions  _s_t_a_r_t  and
+                     _e_n_d,  inclusive.   Positive and negative values for _s_t_a_r_t
+                     and _e_n_d are interpreted as described above.
+              --aa     Append the ``new'' history lines  to  the  history  file.
+                     These  are  history  lines entered since the beginning of
+                     the current bbaasshh session, but not already appended to the
+                     history file.
+              --nn     Read  the history lines not already read from the history
+                     file into the current history list.  These are lines  ap-
+                     pended  to  the  history  file since the beginning of the
+                     current bbaasshh session.
+              --rr     Read the contents of the history file and append them  to
+                     the current history list.
+              --ww     Write the current history list to the history file, over-
+                     writing the history file's contents.
+              --pp     Perform history substitution on the  following  _a_r_g_s  and
+                     display  the  result  on  the  standard output.  Does not
+                     store the results in the history list.  Each _a_r_g must  be
+                     quoted to disable normal history expansion.
+              --ss     Store  the  _a_r_g_s  in  the history list as a single entry.
+                     The last command in the history list  is  removed  before
+                     the _a_r_g_s are added.
+
+              If  the  HHIISSTTTTIIMMEEFFOORRMMAATT variable is set, the time stamp informa-
+              tion associated with each history entry is written to  the  his-
+              tory  file, marked with the history comment character.  When the
+              history file is read, lines beginning with the  history  comment
+              character  followed  immediately  by  a digit are interpreted as
+              timestamps for the following history entry.  The return value is
+              0 unless an invalid option is encountered, an error occurs while
+              reading or writing the history file, an invalid _o_f_f_s_e_t  is  sup-
+              plied as an argument to --dd, or the history expansion supplied as
+              an argument to --pp fails.
+
+       jjoobbss [--llnnpprrss] [ _j_o_b_s_p_e_c ... ]
+       jjoobbss --xx _c_o_m_m_a_n_d [ _a_r_g_s ... ]
+              The first form lists the active jobs.  The options have the fol-
+              lowing meanings:
+              --ll     List process IDs in addition to the normal information.
+              --nn     Display  information  only  about  jobs that have changed
+                     status since the user was last notified of their status.
+              --pp     List only the process  ID  of  the  job's  process  group
+                     leader.
+              --rr     Display only running jobs.
+              --ss     Display only stopped jobs.
+
+              If  _j_o_b_s_p_e_c  is given, output is restricted to information about
+              that job.  The return status is 0 unless an  invalid  option  is
+              encountered or an invalid _j_o_b_s_p_e_c is supplied.
+
+              If the --xx option is supplied, jjoobbss replaces any _j_o_b_s_p_e_c found in
+              _c_o_m_m_a_n_d or _a_r_g_s with the corresponding process group ID, and ex-
+              ecutes _c_o_m_m_a_n_d passing it _a_r_g_s, returning its exit status.
+
+       kkiillll [--ss _s_i_g_s_p_e_c | --nn _s_i_g_n_u_m | --_s_i_g_s_p_e_c] [_p_i_d | _j_o_b_s_p_e_c] ...
+       kkiillll --ll|--LL [_s_i_g_s_p_e_c | _e_x_i_t___s_t_a_t_u_s]
+              Send  the  signal  named  by  _s_i_g_s_p_e_c or _s_i_g_n_u_m to the processes
+              named by _p_i_d or _j_o_b_s_p_e_c.  _s_i_g_s_p_e_c is either  a  case-insensitive
+              signal  name such as SSIIGGKKIILLLL (with or without the SSIIGG prefix) or
+              a signal number; _s_i_g_n_u_m is a signal number.  If _s_i_g_s_p_e_c  is  not
+              present,  then  SSIIGGTTEERRMM is assumed.  An argument of --ll lists the
+              signal names.  If any arguments are supplied when --ll  is  given,
+              the  names  of  the  signals  corresponding to the arguments are
+              listed, and the return status is 0.  The _e_x_i_t___s_t_a_t_u_s argument to
+              --ll  is  a  number  specifying either a signal number or the exit
+              status of a process terminated by a signal.  The  --LL  option  is
+              equivalent  to --ll.  kkiillll returns true if at least one signal was
+              successfully sent, or false if an error occurs or an invalid op-
+              tion is encountered.
+
+       lleett _a_r_g [_a_r_g ...]
+              Each _a_r_g is an arithmetic expression to be evaluated (see AARRIITTHH--
+              MMEETTIICC EEVVAALLUUAATTIIOONN above).  If the last _a_r_g evaluates  to  0,  lleett
+              returns 1; 0 is returned otherwise.
+
+       llooccaall [_o_p_t_i_o_n] [_n_a_m_e[=_v_a_l_u_e] ... | - ]
+              For  each  argument, a local variable named _n_a_m_e is created, and
+              assigned _v_a_l_u_e.  The _o_p_t_i_o_n can be any of the  options  accepted
+              by ddeeccllaarree.  When llooccaall is used within a function, it causes the
+              variable _n_a_m_e to have a visible scope restricted to  that  func-
+              tion  and  its children.  If _n_a_m_e is -, the set of shell options
+              is made local to the function in which llooccaall is  invoked:  shell
+              options  changed  using  the sseett builtin inside the function are
+              restored to their original values  when  the  function  returns.
+              The restore is effected as if a series of sseett commands were exe-
+              cuted to restore the values that were in place before the  func-
+              tion.   With no operands, llooccaall writes a list of local variables
+              to the standard output.  It is an error to use  llooccaall  when  not
+              within  a function.  The return status is 0 unless llooccaall is used
+              outside a function, an invalid _n_a_m_e is supplied, or  _n_a_m_e  is  a
+              readonly variable.
+
+       llooggoouutt Exit a login shell.
+
+       mmaappffiillee  [--dd  _d_e_l_i_m] [--nn _c_o_u_n_t] [--OO _o_r_i_g_i_n] [--ss _c_o_u_n_t] [--tt] [--uu _f_d] [--CC
+       _c_a_l_l_b_a_c_k] [--cc _q_u_a_n_t_u_m] [_a_r_r_a_y]
+       rreeaaddaarrrraayy [--dd _d_e_l_i_m] [--nn _c_o_u_n_t] [--OO _o_r_i_g_i_n] [--ss _c_o_u_n_t] [--tt] [--uu _f_d] [--CC
+       _c_a_l_l_b_a_c_k] [--cc _q_u_a_n_t_u_m] [_a_r_r_a_y]
+              Read  lines from the standard input into the indexed array vari-
+              able _a_r_r_a_y, or from file descriptor _f_d if the --uu option is  sup-
+              plied.   The variable MMAAPPFFIILLEE is the default _a_r_r_a_y.  Options, if
+              supplied, have the following meanings:
+              --dd     The first character of _d_e_l_i_m is used  to  terminate  each
+                     input  line,  rather than newline.  If _d_e_l_i_m is the empty
+                     string, mmaappffiillee will terminate a line when it reads a NUL
+                     character.
+              --nn     Copy  at  most _c_o_u_n_t lines.  If _c_o_u_n_t is 0, all lines are
+                     copied.
+              --OO     Begin assigning to _a_r_r_a_y at index  _o_r_i_g_i_n.   The  default
+                     index is 0.
+              --ss     Discard the first _c_o_u_n_t lines read.
+              --tt     Remove  a trailing _d_e_l_i_m (default newline) from each line
+                     read.
+              --uu     Read lines from file descriptor _f_d instead of  the  stan-
+                     dard input.
+              --CC     Evaluate  _c_a_l_l_b_a_c_k each time _q_u_a_n_t_u_m lines are read.  The
+                     --cc option specifies _q_u_a_n_t_u_m.
+              --cc     Specify the number of lines read  between  each  call  to
+                     _c_a_l_l_b_a_c_k.
+
+              If  --CC  is  specified  without  --cc, the default quantum is 5000.
+              When _c_a_l_l_b_a_c_k is evaluated, it is supplied the index of the next
+              array element to be assigned and the line to be assigned to that
+              element as additional arguments.  _c_a_l_l_b_a_c_k  is  evaluated  after
+              the line is read but before the array element is assigned.
+
+              If  not supplied with an explicit origin, mmaappffiillee will clear _a_r_-
+              _r_a_y before assigning to it.
+
+              mmaappffiillee returns successfully unless an invalid option or  option
+              argument  is  supplied,  _a_r_r_a_y is invalid or unassignable, or if
+              _a_r_r_a_y is not an indexed array.
+
+       ppooppdd [-nn] [+_n] [-_n]
+              Removes entries from the directory stack.   With  no  arguments,
+              removes  the  top directory from the stack, and performs a ccdd to
+              the new top directory.  Arguments, if supplied, have the follow-
+              ing meanings:
+              --nn     Suppresses  the  normal change of directory when removing
+                     directories from the stack, so that only the stack is ma-
+                     nipulated.
+              ++_n     Removes  the _nth entry counting from the left of the list
+                     shown by ddiirrss, starting with zero.  For  example:  ``popd
+                     +0'' removes the first directory, ``popd +1'' the second.
+              --_n     Removes the _nth entry counting from the right of the list
+                     shown by ddiirrss, starting with zero.  For  example:  ``popd
+                     -0''  removes the last directory, ``popd -1'' the next to
+                     last.
+
+              If the ppooppdd command is successful, a ddiirrss is performed as  well,
+              and  the  return  status is 0.  ppooppdd returns false if an invalid
+              option is encountered, the directory stack is empty, a non-exis-
+              tent directory stack entry is specified, or the directory change
+              fails.
+
+       pprriinnttff [--vv _v_a_r] _f_o_r_m_a_t [_a_r_g_u_m_e_n_t_s]
+              Write the formatted _a_r_g_u_m_e_n_t_s to the standard output  under  the
+              control  of  the  _f_o_r_m_a_t.  The --vv option causes the output to be
+              assigned to the variable _v_a_r rather than being  printed  to  the
+              standard output.
+
+              The  _f_o_r_m_a_t  is a character string which contains three types of
+              objects: plain characters, which are simply copied  to  standard
+              output,  character  escape  sequences,  which  are converted and
+              copied to the standard output, and format  specifications,  each
+              of  which  causes  printing of the next successive _a_r_g_u_m_e_n_t.  In
+              addition to the standard _p_r_i_n_t_f(1) format specifications, pprriinnttff
+              interprets the following extensions:
+              %%bb     causes pprriinnttff to expand backslash escape sequences in the
+                     corresponding _a_r_g_u_m_e_n_t in the same way as eecchhoo --ee.
+              %%qq     causes pprriinnttff to output the corresponding _a_r_g_u_m_e_n_t  in  a
+                     format that can be reused as shell input.
+              %%((_d_a_t_e_f_m_t))TT
+                     causes  pprriinnttff  to  output the date-time string resulting
+                     from using _d_a_t_e_f_m_t as a format  string  for  _s_t_r_f_t_i_m_e(3).
+                     The corresponding _a_r_g_u_m_e_n_t is an integer representing the
+                     number of seconds since the epoch.  Two special  argument
+                     values  may  be used: -1 represents the current time, and
+                     -2 represents the time the shell was invoked.  If no  ar-
+                     gument is specified, conversion behaves as if -1 had been
+                     given.  This is an exception to the usual  pprriinnttff  behav-
+                     ior.
+
+              The %b, %q, and %T directives all use the field width and preci-
+              sion arguments from the format specification and write that many
+              bytes from (or use that wide a field for) the expanded argument,
+              which usually contains more characters than the original.
+
+              Arguments to non-string format specifiers are treated as C  con-
+              stants, except that a leading plus or minus sign is allowed, and
+              if the leading character is a single or double quote, the  value
+              is the ASCII value of the following character.
+
+              The  _f_o_r_m_a_t  is  reused as necessary to consume all of the _a_r_g_u_-
+              _m_e_n_t_s.  If the _f_o_r_m_a_t requires more _a_r_g_u_m_e_n_t_s than are supplied,
+              the  extra  format  specifications  behave as if a zero value or
+              null string, as appropriate,  had  been  supplied.   The  return
+              value is zero on success, non-zero on failure.
+
+       ppuusshhdd [--nn] [+_n] [-_n]
+       ppuusshhdd [--nn] [_d_i_r]
+              Adds  a  directory to the top of the directory stack, or rotates
+              the stack, making the new top of the stack the  current  working
+              directory.   With  no arguments, ppuusshhdd exchanges the top two di-
+              rectories and returns 0, unless the directory  stack  is  empty.
+              Arguments, if supplied, have the following meanings:
+              --nn     Suppresses  the  normal change of directory when rotating
+                     or adding directories to the  stack,  so  that  only  the
+                     stack is manipulated.
+              ++_n     Rotates  the  stack  so  that the _nth directory (counting
+                     from the left of the list shown by  ddiirrss,  starting  with
+                     zero) is at the top.
+              --_n     Rotates  the  stack  so  that the _nth directory (counting
+                     from the right of the list shown by ddiirrss,  starting  with
+                     zero) is at the top.
+              _d_i_r    Adds _d_i_r to the directory stack at the top, making it the
+                     new current working directory as if it had been  supplied
+                     as the argument to the ccdd builtin.
+
+              If the ppuusshhdd command is successful, a ddiirrss is performed as well.
+              If the first form is used, ppuusshhdd returns 0 unless the cd to  _d_i_r
+              fails.   With the second form, ppuusshhdd returns 0 unless the direc-
+              tory stack is empty, a non-existent directory stack  element  is
+              specified,  or the directory change to the specified new current
+              directory fails.
+
+       ppwwdd [--LLPP]
+              Print the absolute pathname of the  current  working  directory.
+              The pathname printed contains no symbolic links if the --PP option
+              is supplied or the --oo pphhyyssiiccaall option to the sseett builtin command
+              is  enabled.  If the --LL option is used, the pathname printed may
+              contain symbolic links.  The return status is 0 unless an  error
+              occurs while reading the name of the current directory or an in-
+              valid option is supplied.
+
+       rreeaadd [--eerrss] [--aa _a_n_a_m_e] [--dd _d_e_l_i_m] [--ii _t_e_x_t] [--nn _n_c_h_a_r_s] [--NN _n_c_h_a_r_s] [--pp
+       _p_r_o_m_p_t] [--tt _t_i_m_e_o_u_t] [--uu _f_d] [_n_a_m_e ...]
+              One  line  is read from the standard input, or from the file de-
+              scriptor _f_d supplied as an argument to the --uu option, split into
+              words  as  described  above  under WWoorrdd SSpplliittttiinngg, and the first
+              word is assigned to the first _n_a_m_e, the second word to the  sec-
+              ond  _n_a_m_e,  and  so on.  If there are more words than names, the
+              remaining words and their intervening delimiters are assigned to
+              the  last  _n_a_m_e.   If  there are fewer words read from the input
+              stream than names, the remaining names are assigned  empty  val-
+              ues.   The  characters  in  IIFFSS  are used to split the line into
+              words using the same rules the shell  uses  for  expansion  (de-
+              scribed  above  under  WWoorrdd SSpplliittttiinngg).  The backslash character
+              (\\) may be used to remove any special meaning for the next char-
+              acter  read  and  for  line continuation.  Options, if supplied,
+              have the following meanings:
+              --aa _a_n_a_m_e
+                     The words are assigned to sequential indices of the array
+                     variable _a_n_a_m_e, starting at 0.  _a_n_a_m_e is unset before any
+                     new values are assigned.  Other _n_a_m_e  arguments  are  ig-
+                     nored.
+              --dd _d_e_l_i_m
+                     The first character of _d_e_l_i_m is used to terminate the in-
+                     put line, rather than newline.  If  _d_e_l_i_m  is  the  empty
+                     string,  rreeaadd  will  terminate a line when it reads a NUL
+                     character.
+              --ee     If the standard input is coming from a terminal, rreeaaddlliinnee
+                     (see  RREEAADDLLIINNEE  above) is used to obtain the line.  Read-
+                     line uses the current (or default, if  line  editing  was
+                     not  previously  active) editing settings, but uses Read-
+                     line's default filename completion.
+              --ii _t_e_x_t
+                     If rreeaaddlliinnee is being used  to  read  the  line,  _t_e_x_t  is
+                     placed into the editing buffer before editing begins.
+              --nn _n_c_h_a_r_s
+                     rreeaadd  returns after reading _n_c_h_a_r_s characters rather than
+                     waiting for a complete line of input, but honors a delim-
+                     iter  if fewer than _n_c_h_a_r_s characters are read before the
+                     delimiter.
+              --NN _n_c_h_a_r_s
+                     rreeaadd returns  after  reading  exactly  _n_c_h_a_r_s  characters
+                     rather  than waiting for a complete line of input, unless
+                     EOF is encountered or rreeaadd times out.  Delimiter  charac-
+                     ters  encountered  in the input are not treated specially
+                     and do not cause rreeaadd to return until  _n_c_h_a_r_s  characters
+                     are  read.   The result is not split on the characters in
+                     IIFFSS; the intent is that the variable is assigned  exactly
+                     the characters read (with the exception of backslash; see
+                     the --rr option below).
+              --pp _p_r_o_m_p_t
+                     Display _p_r_o_m_p_t on standard error, without a trailing new-
+                     line, before attempting to read any input.  The prompt is
+                     displayed only if input is coming from a terminal.
+              --rr     Backslash does not act as an escape character.  The back-
+                     slash  is considered to be part of the line.  In particu-
+                     lar, a backslash-newline pair may not then be used  as  a
+                     line continuation.
+              --ss     Silent mode.  If input is coming from a terminal, charac-
+                     ters are not echoed.
+              --tt _t_i_m_e_o_u_t
+                     Cause rreeaadd to time out and return failure if  a  complete
+                     line  of  input  (or a specified number of characters) is
+                     not read within _t_i_m_e_o_u_t seconds.  _t_i_m_e_o_u_t may be a  deci-
+                     mal  number with a fractional portion following the deci-
+                     mal point.  This option is  only  effective  if  rreeaadd  is
+                     reading  input  from  a  terminal, pipe, or other special
+                     file; it has no effect when reading from  regular  files.
+                     If rreeaadd times out, rreeaadd saves any partial input read into
+                     the specified variable _n_a_m_e.  If _t_i_m_e_o_u_t is 0,  rreeaadd  re-
+                     turns  immediately, without trying to read any data.  The
+                     exit status is 0 if input is available on  the  specified
+                     file  descriptor, non-zero otherwise.  The exit status is
+                     greater than 128 if the timeout is exceeded.
+              --uu _f_d  Read input from file descriptor _f_d.
+
+              If no _n_a_m_e_s are supplied, the line read, without the ending  de-
+              limiter  but  otherwise  unmodified, is assigned to the variable
+              RREEPPLLYY.  The exit status is zero, unless end-of-file  is  encoun-
+              tered,  rreeaadd times out (in which case the status is greater than
+              128), a variable assignment error (such as assigning to a  read-
+              only variable) occurs, or an invalid file descriptor is supplied
+              as the argument to --uu.
+
+       rreeaaddoonnllyy [--aaAAff] [--pp] [_n_a_m_e[=_w_o_r_d] ...]
+              The given _n_a_m_e_s are marked readonly; the values of  these  _n_a_m_e_s
+              may  not  be changed by subsequent assignment.  If the --ff option
+              is supplied, the functions corresponding to  the  _n_a_m_e_s  are  so
+              marked.   The  --aa  option restricts the variables to indexed ar-
+              rays; the --AA option restricts the variables to  associative  ar-
+              rays.  If both options are supplied, --AA takes precedence.  If no
+              _n_a_m_e arguments are given, or if the --pp  option  is  supplied,  a
+              list of all readonly names is printed.  The other options may be
+              used to restrict the output to a subset of the set  of  readonly
+              names.   The --pp option causes output to be displayed in a format
+              that may be reused as input.  If a variable name is followed  by
+              =_w_o_r_d,  the  value  of  the variable is set to _w_o_r_d.  The return
+              status is 0 unless an invalid option is encountered, one of  the
+              _n_a_m_e_s is not a valid shell variable name, or --ff is supplied with
+              a _n_a_m_e that is not a function.
+
+       rreettuurrnn [_n]
+              Causes a function to stop executing and return the value  speci-
+              fied  by _n to its caller.  If _n is omitted, the return status is
+              that of the last command executed in the function body.  If  rree--
+              ttuurrnn is executed by a trap handler, the last command used to de-
+              termine the status is the last command executed before the  trap
+              handler.   If  rreettuurrnn  is executed during a DDEEBBUUGG trap, the last
+              command used to determine the status is the  last  command  exe-
+              cuted  by the trap handler before rreettuurrnn was invoked.  If rreettuurrnn
+              is used outside a function, but during execution of a script  by
+              the  ..   (ssoouurrccee) command, it causes the shell to stop executing
+              that script and return either _n or the exit status of  the  last
+              command  executed  within  the  script as the exit status of the
+              script.  If _n is supplied, the return value is its least signif-
+              icant  8  bits.  The return status is non-zero if rreettuurrnn is sup-
+              plied a non-numeric argument, or is used outside a function  and
+              not  during  execution  of a script by .. or ssoouurrccee.  Any command
+              associated with the RREETTUURRNN trap is executed before execution re-
+              sumes after the function or script.
+
+       sseett [----aabbeeffhhkkmmnnppttuuvvxxBBCCEEHHPPTT] [--oo _o_p_t_i_o_n_-_n_a_m_e] [_a_r_g ...]
+       sseett [++aabbeeffhhkkmmnnppttuuvvxxBBCCEEHHPPTT] [++oo _o_p_t_i_o_n_-_n_a_m_e] [_a_r_g ...]
+              Without  options,  the name and value of each shell variable are
+              displayed in a format that can be reused as input for setting or
+              resetting the currently-set variables.  Read-only variables can-
+              not be reset.  In _p_o_s_i_x _m_o_d_e, only shell variables  are  listed.
+              The  output is sorted according to the current locale.  When op-
+              tions are specified, they set or unset  shell  attributes.   Any
+              arguments  remaining after option processing are treated as val-
+              ues for the positional parameters and are assigned, in order, to
+              $$11,  $$22,  ......   $$_n.   Options,  if specified, have the following
+              meanings:
+              --aa      Each variable or function that is created or modified is
+                      given  the export attribute and marked for export to the
+                      environment of subsequent commands.
+              --bb      Report the status of terminated background jobs  immedi-
+                      ately, rather than before the next primary prompt.  This
+                      is effective only when job control is enabled.
+              --ee      Exit immediately if a _p_i_p_e_l_i_n_e (which may consist  of  a
+                      single  _s_i_m_p_l_e  _c_o_m_m_a_n_d),  a _l_i_s_t, or a _c_o_m_p_o_u_n_d _c_o_m_m_a_n_d
+                      (see SSHHEELLLL GGRRAAMMMMAARR above), exits with a non-zero status.
+                      The  shell  does  not  exit if the command that fails is
+                      part of the command list immediately following  a  wwhhiillee
+                      or  uunnttiill  keyword, part of the test following the iiff or
+                      eelliiff reserved words, part of any command executed  in  a
+                      &&&&  or |||| list except the command following the final &&&&
+                      or ||||, any command in a pipeline but the last, or if the
+                      command's  return  value is being inverted with !!.  If a
+                      compound command other than a subshell  returns  a  non-
+                      zero  status because a command failed while --ee was being
+                      ignored, the shell does not exit.  A  trap  on  EERRRR,  if
+                      set,  is  executed  before the shell exits.  This option
+                      applies to the shell environment and each subshell envi-
+                      ronment  separately  (see  CCOOMMMMAANNDD EEXXEECCUUTTIIOONN EENNVVIIRROONNMMEENNTT
+                      above), and may cause subshells to exit before executing
+                      all the commands in the subshell.
+
+                      If  a  compound  command or shell function executes in a
+                      context where --ee is being ignored, none of the  commands
+                      executed  within  the  compound command or function body
+                      will be affected by the --ee setting, even if  --ee  is  set
+                      and  a  command returns a failure status.  If a compound
+                      command or shell function sets --ee while executing  in  a
+                      context  where --ee is ignored, that setting will not have
+                      any effect until the compound  command  or  the  command
+                      containing the function call completes.
+              --ff      Disable pathname expansion.
+              --hh      Remember  the location of commands as they are looked up
+                      for execution.  This is enabled by default.
+              --kk      All arguments in the form of assignment  statements  are
+                      placed  in the environment for a command, not just those
+                      that precede the command name.
+              --mm      Monitor mode.  Job control is enabled.  This  option  is
+                      on  by  default  for  interactive shells on systems that
+                      support it (see JJOOBB CCOONNTTRROOLL above).  All  processes  run
+                      in a separate process group.  When a background job com-
+                      pletes, the shell prints a line containing its exit sta-
+                      tus.
+              --nn      Read commands but do not execute them.  This may be used
+                      to check a shell script for syntax errors.  This is  ig-
+                      nored by interactive shells.
+              --oo _o_p_t_i_o_n_-_n_a_m_e
+                      The _o_p_t_i_o_n_-_n_a_m_e can be one of the following:
+                      aalllleexxppoorrtt
+                              Same as --aa.
+                      bbrraacceeeexxppaanndd
+                              Same as --BB.
+                      eemmaaccss   Use  an  emacs-style command line editing inter-
+                              face.  This is enabled by default when the shell
+                              is interactive, unless the shell is started with
+                              the ----nnooeeddiittiinngg option.  This also  affects  the
+                              editing interface used for rreeaadd --ee.
+                      eerrrreexxiitt Same as --ee.
+                      eerrrrttrraaccee
+                              Same as --EE.
+                      ffuunnccttrraaccee
+                              Same as --TT.
+                      hhaasshhaallll Same as --hh.
+                      hhiisstteexxppaanndd
+                              Same as --HH.
+                      hhiissttoorryy Enable command history, as described above under
+                              HHIISSTTOORRYY.  This option is on by default in inter-
+                              active shells.
+                      iiggnnoorreeeeooff
+                              The  effect  is  as  if  the shell command ``IG-
+                              NOREEOF=10'' had been executed (see SShheellll  VVaarrii--
+                              aabblleess above).
+                      kkeeyywwoorrdd Same as --kk.
+                      mmoonniittoorr Same as --mm.
+                      nnoocclloobbbbeerr
+                              Same as --CC.
+                      nnooeexxeecc  Same as --nn.
+                      nnoogglloobb  Same as --ff.
+                      nnoolloogg   Currently ignored.
+                      nnoottiiffyy  Same as --bb.
+                      nnoouunnsseett Same as --uu.
+                      oonneeccmmdd  Same as --tt.
+                      pphhyyssiiccaall
+                              Same as --PP.
+                      ppiippeeffaaiill
+                              If  set,  the  return value of a pipeline is the
+                              value of the last (rightmost)  command  to  exit
+                              with  a non-zero status, or zero if all commands
+                              in the pipeline exit successfully.  This  option
+                              is disabled by default.
+                      ppoossiixx   Change  the  behavior  of bbaasshh where the default
+                              operation differs from  the  POSIX  standard  to
+                              match  the  standard (_p_o_s_i_x _m_o_d_e).  See SSEEEE AALLSSOO
+                              below for a reference to a document that details
+                              how posix mode affects bash's behavior.
+                      pprriivviilleeggeedd
+                              Same as --pp.
+                      vveerrbboossee Same as --vv.
+                      vvii      Use  a  vi-style command line editing interface.
+                              This also affects the editing interface used for
+                              rreeaadd --ee.
+                      xxttrraaccee  Same as --xx.
+                      If --oo is supplied with no _o_p_t_i_o_n_-_n_a_m_e, the values of the
+                      current options are printed.  If ++oo is supplied with  no
+                      _o_p_t_i_o_n_-_n_a_m_e,  a  series  of sseett commands to recreate the
+                      current option settings is  displayed  on  the  standard
+                      output.
+              --pp      Turn  on  _p_r_i_v_i_l_e_g_e_d  mode.   In this mode, the $$EENNVV and
+                      $$BBAASSHH__EENNVV files are not processed, shell  functions  are
+                      not  inherited  from the environment, and the SSHHEELLLLOOPPTTSS,
+                      BBAASSHHOOPPTTSS, CCDDPPAATTHH, and GGLLOOBBIIGGNNOORREE variables, if they  ap-
+                      pear  in  the environment, are ignored.  If the shell is
+                      started with the effective user (group) id not equal  to
+                      the  real user (group) id, and the --pp option is not sup-
+                      plied, these actions are taken and the effective user id
+                      is  set  to  the real user id.  If the --pp option is sup-
+                      plied at startup, the effective user id  is  not  reset.
+                      Turning  this  option  off causes the effective user and
+                      group ids to be set to the real user and group ids.
+              --tt      Exit after reading and executing one command.
+              --uu      Treat unset variables and parameters other than the spe-
+                      cial  parameters "@" and "*" as an error when performing
+                      parameter expansion.  If expansion is  attempted  on  an
+                      unset  variable  or parameter, the shell prints an error
+                      message, and, if not interactive, exits with a  non-zero
+                      status.
+              --vv      Print shell input lines as they are read.
+              --xx      After  expanding  each _s_i_m_p_l_e _c_o_m_m_a_n_d, ffoorr command, ccaassee
+                      command, sseelleecctt command, or arithmetic ffoorr command, dis-
+                      play  the expanded value of PPSS44, followed by the command
+                      and its expanded arguments or associated word list.
+              --BB      The shell performs brace expansion (see BBrraaccee  EExxppaannssiioonn
+                      above).  This is on by default.
+              --CC      If  set,  bbaasshh  does not overwrite an existing file with
+                      the >>, >>&&, and <<>> redirection operators.   This  may  be
+                      overridden when creating output files by using the redi-
+                      rection operator >>|| instead of >>.
+              --EE      If set, any trap on EERRRR is inherited by shell functions,
+                      command  substitutions,  and commands executed in a sub-
+                      shell environment.  The EERRRR trap is normally not  inher-
+                      ited in such cases.
+              --HH      Enable !!  style history substitution.  This option is on
+                      by default when the shell is interactive.
+              --PP      If set, the shell does not resolve symbolic  links  when
+                      executing  commands  such  as ccdd that change the current
+                      working  directory.   It  uses  the  physical  directory
+                      structure instead.  By default, bbaasshh follows the logical
+                      chain of  directories  when  performing  commands  which
+                      change the current directory.
+              --TT      If  set,  any traps on DDEEBBUUGG and RREETTUURRNN are inherited by
+                      shell functions, command substitutions, and commands ex-
+                      ecuted  in a subshell environment.  The DDEEBBUUGG and RREETTUURRNN
+                      traps are normally not inherited in such cases.
+              ----      If no arguments follow this option, then the  positional
+                      parameters are unset.  Otherwise, the positional parame-
+                      ters are set to the _a_r_gs, even if  some  of  them  begin
+                      with a --.
+              --       Signal  the  end of options, cause all remaining _a_r_gs to
+                      be assigned to the positional parameters.  The --xx and --vv
+                      options are turned off.  If there are no _a_r_gs, the posi-
+                      tional parameters remain unchanged.
+
+              The options are off by default unless otherwise noted.  Using  +
+              rather  than  -  causes these options to be turned off.  The op-
+              tions can also be specified as arguments to an invocation of the
+              shell.   The current set of options may be found in $$--.  The re-
+              turn status is always true unless an invalid option  is  encoun-
+              tered.
+
+       sshhiifftt [_n]
+              The  positional  parameters  from _n+1 ... are renamed to $$11 ........
+              Parameters represented by the numbers $$## down to $$##-_n+1 are  un-
+              set.   _n must be a non-negative number less than or equal to $$##.
+              If _n is 0, no parameters are changed.  If _n is not given, it  is
+              assumed to be 1.  If _n is greater than $$##, the positional param-
+              eters are not changed.  The return status is greater  than  zero
+              if _n is greater than $$## or less than zero; otherwise 0.
+
+       sshhoopptt [--ppqqssuu] [--oo] [_o_p_t_n_a_m_e ...]
+              Toggle  the values of settings controlling optional shell behav-
+              ior.  The settings can be either those listed below, or, if  the
+              --oo option is used, those available with the --oo option to the sseett
+              builtin command.  With no options, or with the --pp option, a list
+              of  all  settable  options  is  displayed, with an indication of
+              whether or not each is set; if _o_p_t_n_a_m_e_s are supplied, the output
+              is  restricted to those options.  The --pp option causes output to
+              be displayed in a form that may be reused as input.   Other  op-
+              tions have the following meanings:
+              --ss     Enable (set) each _o_p_t_n_a_m_e.
+              --uu     Disable (unset) each _o_p_t_n_a_m_e.
+              --qq     Suppresses  normal output (quiet mode); the return status
+                     indicates whether the _o_p_t_n_a_m_e is set or unset.  If multi-
+                     ple  _o_p_t_n_a_m_e arguments are given with --qq, the return sta-
+                     tus is zero if all _o_p_t_n_a_m_e_s are enabled; non-zero  other-
+                     wise.
+              --oo     Restricts  the  values of _o_p_t_n_a_m_e to be those defined for
+                     the --oo option to the sseett builtin.
+
+              If either --ss or --uu is used  with  no  _o_p_t_n_a_m_e  arguments,  sshhoopptt
+              shows  only  those options which are set or unset, respectively.
+              Unless otherwise noted, the sshhoopptt options are  disabled  (unset)
+              by default.
+
+              The  return  status when listing options is zero if all _o_p_t_n_a_m_e_s
+              are enabled, non-zero otherwise.  When setting or unsetting  op-
+              tions,  the  return  status  is  zero unless an _o_p_t_n_a_m_e is not a
+              valid shell option.
+
+              The list of sshhoopptt options is:
+
+              aassssoocc__eexxppaanndd__oonnccee
+                      If set, the shell suppresses multiple evaluation of  as-
+                      sociative  array subscripts during arithmetic expression
+                      evaluation, while executing builtins  that  can  perform
+                      variable  assignments, and while executing builtins that
+                      perform array dereferencing.
+              aauuttooccdd  If set, a command name that is the name of  a  directory
+                      is  executed  as  if it were the argument to the ccdd com-
+                      mand.  This option is only used by interactive shells.
+              ccddaabbllee__vvaarrss
+                      If set, an argument to the ccdd builtin  command  that  is
+                      not  a directory is assumed to be the name of a variable
+                      whose value is the directory to change to.
+              ccddssppeellll If set, minor errors in the spelling of a directory com-
+                      ponent  in  a  ccdd command will be corrected.  The errors
+                      checked for are transposed characters, a missing charac-
+                      ter,  and  one  character  too many.  If a correction is
+                      found, the corrected filename is printed, and  the  com-
+                      mand  proceeds.  This option is only used by interactive
+                      shells.
+              cchheecckkhhaasshh
+                      If set, bbaasshh checks that a command found in the hash ta-
+                      ble  exists  before  trying  to execute it.  If a hashed
+                      command no longer exists, a normal path search  is  per-
+                      formed.
+              cchheecckkjjoobbss
+                      If set, bbaasshh lists the status of any stopped and running
+                      jobs before exiting an interactive shell.  If  any  jobs
+                      are running, this causes the exit to be deferred until a
+                      second exit is attempted without an intervening  command
+                      (see JJOOBB CCOONNTTRROOLL above).  The shell always postpones ex-
+                      iting if any jobs are stopped.
+              cchheecckkwwiinnssiizzee
+                      If set, bbaasshh checks the window size after each  external
+                      (non-builtin)  command  and,  if  necessary, updates the
+                      values of LLIINNEESS and CCOOLLUUMMNNSS.  This option is enabled  by
+                      default.
+              ccmmddhhiisstt If  set,  bbaasshh attempts to save all lines of a multiple-
+                      line command in the same  history  entry.   This  allows
+                      easy  re-editing of multi-line commands.  This option is
+                      enabled by default, but only has an  effect  if  command
+                      history is enabled, as described above under HHIISSTTOORRYY.
+              ccoommppaatt3311
+              ccoommppaatt3322
+              ccoommppaatt4400
+              ccoommppaatt4411
+              ccoommppaatt4422
+              ccoommppaatt4433
+              ccoommppaatt4444
+                      These  control aspects of the shell's compatibility mode
+                      (see SSHHEELLLL CCOOMMPPAATTIIBBIILLIITTYY MMOODDEE below).
+
+              ccoommpplleettee__ffuullllqquuoottee
+                      If set, bbaasshh quotes all shell  metacharacters  in  file-
+                      names  and  directory  names when performing completion.
+                      If not set, bbaasshh removes metacharacters such as the dol-
+                      lar  sign from the set of characters that will be quoted
+                      in completed filenames when these metacharacters  appear
+                      in  shell  variable references in words to be completed.
+                      This means that dollar signs in variable names that  ex-
+                      pand  to  directories  will  not be quoted; however, any
+                      dollar signs appearing in filenames will not be  quoted,
+                      either.   This  is  active only when bash is using back-
+                      slashes to quote completed filenames.  This variable  is
+                      set  by  default,  which is the default bash behavior in
+                      versions through 4.2.
+
+              ddiirreexxppaanndd
+                      If set, bbaasshh replaces directory names with  the  results
+                      of  word  expansion when performing filename completion.
+                      This changes the contents of the readline  editing  buf-
+                      fer.   If  not  set,  bbaasshh attempts to preserve what the
+                      user typed.
+
+              ddiirrssppeellll
+                      If set, bbaasshh attempts spelling correction  on  directory
+                      names  during word completion if the directory name ini-
+                      tially supplied does not exist.
+
+              ddoottgglloobb If set, bbaasshh includes filenames beginning with a `.'  in
+                      the  results of pathname expansion.  The filenames ````..''''
+                      and ````....''''  must always be matched explicitly,  even  if
+                      ddoottgglloobb is set.
+
+              eexxeeccffaaiill
+                      If set, a non-interactive shell will not exit if it can-
+                      not execute the file specified as  an  argument  to  the
+                      eexxeecc  builtin  command.   An  interactive shell does not
+                      exit if eexxeecc fails.
+
+              eexxppaanndd__aalliiaasseess
+                      If set, aliases are expanded as  described  above  under
+                      AALLIIAASSEESS.  This option is enabled by default for interac-
+                      tive shells.
+
+              eexxttddeebbuugg
+                      If set at shell invocation, or in a shell startup  file,
+                      arrange to execute the debugger profile before the shell
+                      starts, identical to the ----ddeebbuuggggeerr option.  If set  af-
+                      ter  invocation,  behavior intended for use by debuggers
+                      is enabled:
+
+                      11..     The --FF option to the ddeeccllaarree builtin displays the
+                             source file name and line number corresponding to
+                             each function name supplied as an argument.
+
+                      22..     If the command run by the DDEEBBUUGG  trap  returns  a
+                             non-zero  value,  the next command is skipped and
+                             not executed.
+
+                      33..     If the command run by the DDEEBBUUGG  trap  returns  a
+                             value  of 2, and the shell is executing in a sub-
+                             routine (a shell function or a shell script  exe-
+                             cuted  by  the  ..  or ssoouurrccee builtins), the shell
+                             simulates a call to rreettuurrnn.
+
+                      44..     BBAASSHH__AARRGGCC and BBAASSHH__AARRGGVV are updated as  described
+                             in their descriptions above.
+
+                      55..     Function  tracing  is  enabled: command substitu-
+                             tion, shell functions, and subshells invoked with
+                             (( _c_o_m_m_a_n_d )) inherit the DDEEBBUUGG and RREETTUURRNN traps.
+
+                      66..     Error  tracing  is enabled: command substitution,
+                             shell functions, and  subshells  invoked  with  ((
+                             _c_o_m_m_a_n_d )) inherit the EERRRR trap.
+
+              eexxttgglloobb If set, the extended pattern matching features described
+                      above under PPaatthhnnaammee EExxppaannssiioonn are enabled.
+
+              eexxttqquuoottee
+                      If set, $$'_s_t_r_i_n_g' and  $$"_s_t_r_i_n_g"  quoting  is  performed
+                      within   $${{_p_a_r_a_m_e_t_e_r}}   expansions  enclosed  in  double
+                      quotes.  This option is enabled by default.
+
+              ffaaiillgglloobb
+                      If set, patterns which fail to  match  filenames  during
+                      pathname expansion result in an expansion error.
+
+              ffoorrccee__ffiiggnnoorree
+                      If  set,  the  suffixes  specified  by the FFIIGGNNOORREE shell
+                      variable cause words to be ignored when performing  word
+                      completion even if the ignored words are the only possi-
+                      ble completions.  See SSHHEELLLL VVAARRIIAABBLLEESS above  for  a  de-
+                      scription  of  FFIIGGNNOORREE.   This  option is enabled by de-
+                      fault.
+
+              gglloobbaasscciiiirraannggeess
+                      If set,  range  expressions  used  in  pattern  matching
+                      bracket  expressions (see PPaatttteerrnn MMaattcchhiinngg above) behave
+                      as if in the traditional C locale when  performing  com-
+                      parisons.   That  is, the current locale's collating se-
+                      quence is not taken into account, so bb will not  collate
+                      between  AA  and  BB,  and upper-case and lower-case ASCII
+                      characters will collate together.
+
+              gglloobbssttaarr
+                      If set, the pattern **** used in a pathname expansion con-
+                      text  will  match all files and zero or more directories
+                      and subdirectories.  If the pattern is followed by a  //,
+                      only directories and subdirectories match.
+
+              ggnnuu__eerrrrffmmtt
+                      If set, shell error messages are written in the standard
+                      GNU error message format.
+
+              hhiissttaappppeenndd
+                      If set, the history list is appended to the  file  named
+                      by the value of the HHIISSTTFFIILLEE variable when the shell ex-
+                      its, rather than overwriting the file.
+
+              hhiissttrreeeeddiitt
+                      If set, and rreeaaddlliinnee is being used, a user is given  the
+                      opportunity to re-edit a failed history substitution.
+
+              hhiissttvveerriiffyy
+                      If  set, and rreeaaddlliinnee is being used, the results of his-
+                      tory substitution are  not  immediately  passed  to  the
+                      shell  parser.   Instead,  the  resulting line is loaded
+                      into the rreeaaddlliinnee editing buffer, allowing further modi-
+                      fication.
+
+              hhoossttccoommpplleettee
+                      If set, and rreeaaddlliinnee is being used, bbaasshh will attempt to
+                      perform hostname completion when a word containing  a  @@
+                      is   being  completed  (see  CCoommpplleettiinngg  under  RREEAADDLLIINNEE
+                      above).  This is enabled by default.
+
+              hhuuppoonneexxiitt
+                      If set, bbaasshh will send SSIIGGHHUUPP to all jobs when an inter-
+                      active login shell exits.
+
+              iinnhheerriitt__eerrrreexxiitt
+                      If  set,  command substitution inherits the value of the
+                      eerrrreexxiitt option, instead of unsetting it in the  subshell
+                      environment.   This option is enabled when _p_o_s_i_x _m_o_d_e is
+                      enabled.
+
+              iinntteerraaccttiivvee__ccoommmmeennttss
+                      If set, allow a word beginning with ## to cause that word
+                      and  all remaining characters on that line to be ignored
+                      in an interactive shell (see CCOOMMMMEENNTTSS above).  This  op-
+                      tion is enabled by default.
+
+              llaassttppiippee
+                      If  set,  and  job control is not active, the shell runs
+                      the last command of a pipeline not executed in the back-
+                      ground in the current shell environment.
+
+              lliitthhiisstt If  set,  and  the ccmmddhhiisstt option is enabled, multi-line
+                      commands are saved to the history with embedded newlines
+                      rather than using semicolon separators where possible.
+
+              llooccaallvvaarr__iinnhheerriitt
+                      If set, local variables inherit the value and attributes
+                      of a variable of the same name that exists at a previous
+                      scope before any new value is assigned.  The nameref at-
+                      tribute is not inherited.
+
+              llooccaallvvaarr__uunnsseett
+                      If set, calling uunnsseett on  local  variables  in  previous
+                      function  scopes  marks  them so subsequent lookups find
+                      them unset until that function returns. This is  identi-
+                      cal  to the behavior of unsetting local variables at the
+                      current function scope.
+
+              llooggiinn__sshheellll
+                      The shell sets this option if it is started as  a  login
+                      shell  (see  IINNVVOOCCAATTIIOONN  above).   The  value may not be
+                      changed.
+
+              mmaaiillwwaarrnn
+                      If set, and a file that bbaasshh is checking  for  mail  has
+                      been  accessed  since  the last time it was checked, the
+                      message ``The mail in _m_a_i_l_f_i_l_e has been read''  is  dis-
+                      played.
+
+              nnoo__eemmppttyy__ccmmdd__ccoommpplleettiioonn
+                      If  set,  and  rreeaaddlliinnee is being used, bbaasshh will not at-
+                      tempt to search the PPAATTHH for possible  completions  when
+                      completion is attempted on an empty line.
+
+              nnooccaasseegglloobb
+                      If  set,  bbaasshh  matches  filenames in a case-insensitive
+                      fashion when performing pathname expansion (see PPaatthhnnaammee
+                      EExxppaannssiioonn above).
+
+              nnooccaasseemmaattcchh
+                      If  set,  bbaasshh  matches  patterns  in a case-insensitive
+                      fashion when performing matching while executing ccaassee or
+                      [[[[ conditional commands, when performing pattern substi-
+                      tution word expansions, or when filtering possible  com-
+                      pletions as part of programmable completion.
+
+              nnuullllgglloobb
+                      If  set,  bbaasshh allows patterns which match no files (see
+                      PPaatthhnnaammee EExxppaannssiioonn above) to expand to  a  null  string,
+                      rather than themselves.
+
+              pprrooggccoommpp
+                      If set, the programmable completion facilities (see PPrroo--
+                      ggrraammmmaabbllee CCoommpplleettiioonn above) are enabled.  This option is
+                      enabled by default.
+
+              pprrooggccoommpp__aalliiaass
+                      If  set,  and  programmable  completion is enabled, bbaasshh
+                      treats a command name that doesn't have any  completions
+                      as  a possible alias and attempts alias expansion. If it
+                      has an alias, bbaasshh attempts programmable completion  us-
+                      ing the command word resulting from the expanded alias.
+
+              pprroommppttvvaarrss
+                      If set, prompt strings undergo parameter expansion, com-
+                      mand substitution, arithmetic expansion, and  quote  re-
+                      moval  after  being  expanded  as described in PPRROOMMPPTTIINNGG
+                      above.  This option is enabled by default.
+
+              rreessttrriicctteedd__sshheellll
+                      The shell sets this option  if  it  is  started  in  re-
+                      stricted  mode  (see RREESSTTRRIICCTTEEDD SSHHEELLLL below).  The value
+                      may not be changed.  This is not reset when the  startup
+                      files  are  executed, allowing the startup files to dis-
+                      cover whether or not a shell is restricted.
+
+              sshhiifftt__vveerrbboossee
+                      If set, the sshhiifftt builtin prints an error  message  when
+                      the shift count exceeds the number of positional parame-
+                      ters.
+
+              ssoouurrcceeppaatthh
+                      If set, the ssoouurrccee (..) builtin uses the value of PPAATTHH to
+                      find  the  directory  containing the file supplied as an
+                      argument.  This option is enabled by default.
+
+              xxppgg__eecchhoo
+                      If set, the eecchhoo builtin  expands  backslash-escape  se-
+                      quences by default.
+
+       ssuussppeenndd [--ff]
+              Suspend  the execution of this shell until it receives a SSIIGGCCOONNTT
+              signal.  A login shell cannot be suspended; the --ff option can be
+              used to override this and force the suspension.  The return sta-
+              tus is 0 unless the shell is a login shell and --ff  is  not  sup-
+              plied, or if job control is not enabled.
+
+       tteesstt _e_x_p_r
+       [[ _e_x_p_r ]]
+              Return a status of 0 (true) or 1 (false) depending on the evalu-
+              ation of the conditional expression _e_x_p_r.  Each operator and op-
+              erand  must be a separate argument.  Expressions are composed of
+              the primaries described in the bbaasshh  manual  page  under  CCOONNDDII--
+              TTIIOONNAALL  EEXXPPRREESSSSIIOONNSS.  tteesstt does not accept any options, nor does
+              it accept and ignore an argument of ---- as signifying the end  of
+              options.
+
+              Expressions  may  be  combined  using  the  following operators,
+              listed in decreasing order of precedence.   The  evaluation  de-
+              pends  on  the  number of arguments; see below.  Operator prece-
+              dence is used when there are five or more arguments.
+              !! _e_x_p_r True if _e_x_p_r is false.
+              (( _e_x_p_r ))
+                     Returns the value of _e_x_p_r.  This may be used to  override
+                     the normal precedence of operators.
+              _e_x_p_r_1 -aa _e_x_p_r_2
+                     True if both _e_x_p_r_1 and _e_x_p_r_2 are true.
+              _e_x_p_r_1 -oo _e_x_p_r_2
+                     True if either _e_x_p_r_1 or _e_x_p_r_2 is true.
+
+              tteesstt and [[ evaluate conditional expressions using a set of rules
+              based on the number of arguments.
+
+              0 arguments
+                     The expression is false.
+              1 argument
+                     The expression is true if and only if the argument is not
+                     null.
+              2 arguments
+                     If the first argument is !!, the expression is true if and
+                     only if the second argument is null.  If the first  argu-
+                     ment  is  one  of  the unary conditional operators listed
+                     above under CCOONNDDIITTIIOONNAALL EEXXPPRREESSSSIIOONNSS,  the  expression  is
+                     true if the unary test is true.  If the first argument is
+                     not a valid unary conditional operator, the expression is
+                     false.
+              3 arguments
+                     The following conditions are applied in the order listed.
+                     If the second argument is one of the  binary  conditional
+                     operators listed above under CCOONNDDIITTIIOONNAALL EEXXPPRREESSSSIIOONNSS, the
+                     result of the expression is the result of the binary test
+                     using  the first and third arguments as operands.  The --aa
+                     and --oo operators are  considered  binary  operators  when
+                     there  are  three arguments.  If the first argument is !!,
+                     the value is the negation of the two-argument test  using
+                     the second and third arguments.  If the first argument is
+                     exactly (( and the third argument is exactly )), the result
+                     is  the one-argument test of the second argument.  Other-
+                     wise, the expression is false.
+              4 arguments
+                     If the first argument is !!, the result is the negation of
+                     the  three-argument  expression composed of the remaining
+                     arguments.  Otherwise, the expression is parsed and eval-
+                     uated  according  to  precedence  using  the rules listed
+                     above.
+              5 or more arguments
+                     The expression  is  parsed  and  evaluated  according  to
+                     precedence using the rules listed above.
+
+              When  used  with  tteesstt  or [[, the << and >> operators sort lexico-
+              graphically using ASCII ordering.
+
+       ttiimmeess  Print the accumulated user and system times for  the  shell  and
+              for processes run from the shell.  The return status is 0.
+
+       ttrraapp [--llpp] [[_a_r_g] _s_i_g_s_p_e_c ...]
+              The  command  _a_r_g  is to be read and executed when the shell re-
+              ceives signal(s) _s_i_g_s_p_e_c.  If _a_r_g is absent (and there is a sin-
+              gle  _s_i_g_s_p_e_c) or --, each specified signal is reset to its origi-
+              nal disposition (the value it had upon entrance to  the  shell).
+              If  _a_r_g  is the null string the signal specified by each _s_i_g_s_p_e_c
+              is ignored by the shell and by the commands it invokes.  If  _a_r_g
+              is  not present and --pp has been supplied, then the trap commands
+              associated with each _s_i_g_s_p_e_c are displayed.  If no arguments are
+              supplied  or  if  only --pp is given, ttrraapp prints the list of com-
+              mands associated with each signal.  The  --ll  option  causes  the
+              shell  to  print  a list of signal names and their corresponding
+              numbers.  Each _s_i_g_s_p_e_c is either a signal name defined in  <_s_i_g_-
+              _n_a_l_._h>,  or  a signal number.  Signal names are case insensitive
+              and the SSIIGG prefix is optional.
+
+              If a _s_i_g_s_p_e_c is EEXXIITT (0) the command _a_r_g  is  executed  on  exit
+              from  the shell.  If a _s_i_g_s_p_e_c is DDEEBBUUGG, the command _a_r_g is exe-
+              cuted before every _s_i_m_p_l_e _c_o_m_m_a_n_d, _f_o_r  command,  _c_a_s_e  command,
+              _s_e_l_e_c_t  command,  every  arithmetic  _f_o_r command, and before the
+              first command executes in a shell function  (see  SSHHEELLLL  GGRRAAMMMMAARR
+              above).   Refer to the description of the eexxttddeebbuugg option to the
+              sshhoopptt builtin for details of its effect on the DDEEBBUUGG trap.  If a
+              _s_i_g_s_p_e_c is RREETTUURRNN, the command _a_r_g is executed each time a shell
+              function or a script executed with the .. or ssoouurrccee builtins fin-
+              ishes executing.
+
+              If  a  _s_i_g_s_p_e_c  is  EERRRR,  the command _a_r_g is executed whenever a
+              pipeline (which may consist of a single simple command), a list,
+              or a compound command returns a non-zero exit status, subject to
+              the following conditions.  The EERRRR trap is not executed  if  the
+              failed command is part of the command list immediately following
+              a wwhhiillee or uunnttiill keyword, part of the test in an  _i_f  statement,
+              part of a command executed in a &&&& or |||| list except the command
+              following the final &&&& or ||||, any command in a pipeline but  the
+              last,  or  if the command's return value is being inverted using
+              !!.  These are the same conditions obeyed by the eerrrreexxiitt (--ee) op-
+              tion.
+
+              Signals ignored upon entry to the shell cannot be trapped or re-
+              set.  Trapped signals that are not being ignored  are  reset  to
+              their original values in a subshell or subshell environment when
+              one is created.  The return status is false if  any  _s_i_g_s_p_e_c  is
+              invalid; otherwise ttrraapp returns true.
+
+       ttyyppee [--aaffttppPP] _n_a_m_e [_n_a_m_e ...]
+              With  no options, indicate how each _n_a_m_e would be interpreted if
+              used as a command name.  If the --tt option is used, ttyyppee prints a
+              string  which  is  one  of _a_l_i_a_s, _k_e_y_w_o_r_d, _f_u_n_c_t_i_o_n, _b_u_i_l_t_i_n, or
+              _f_i_l_e if  _n_a_m_e  is  an  alias,  shell  reserved  word,  function,
+              builtin,  or disk file, respectively.  If the _n_a_m_e is not found,
+              then nothing is printed, and an exit  status  of  false  is  re-
+              turned.   If the --pp option is used, ttyyppee either returns the name
+              of the disk file that would be executed if _n_a_m_e  were  specified
+              as  a command name, or nothing if ``type -t name'' would not re-
+              turn _f_i_l_e.  The --PP option forces a PPAATTHH search  for  each  _n_a_m_e,
+              even if ``type -t name'' would not return _f_i_l_e.  If a command is
+              hashed, --pp and --PP print the hashed value, which is not necessar-
+              ily  the  file  that appears first in PPAATTHH.  If the --aa option is
+              used, ttyyppee prints all of the places that contain  an  executable
+              named _n_a_m_e.  This includes aliases and functions, if and only if
+              the --pp option is not also used.  The table of hashed commands is
+              not  consulted  when  using  --aa.  The --ff option suppresses shell
+              function lookup, as with the ccoommmmaanndd builtin.  ttyyppee returns true
+              if all of the arguments are found, false if any are not found.
+
+       uulliimmiitt [--HHSS] --aa
+       uulliimmiitt [--HHSS] [--bbccddeeffiikkllmmnnppqqrrssttuuvvxxPPRRTT [_l_i_m_i_t]]
+              Provides  control  over the resources available to the shell and
+              to processes started by it, on systems that allow such  control.
+              The --HH and --SS options specify that the hard or soft limit is set
+              for the given resource.  A hard limit cannot be increased  by  a
+              non-root  user  once it is set; a soft limit may be increased up
+              to the value of the hard limit.  If neither --HH nor --SS is  speci-
+              fied, both the soft and hard limits are set.  The value of _l_i_m_i_t
+              can be a number in the unit specified for the resource or one of
+              the special values hhaarrdd, ssoofftt, or uunnlliimmiitteedd, which stand for the
+              current hard limit, the current soft limit, and  no  limit,  re-
+              spectively.   If _l_i_m_i_t is omitted, the current value of the soft
+              limit of the resource is printed, unless the --HH option is given.
+              When  more  than  one  resource is specified, the limit name and
+              unit, if appropriate, are printed before the value.   Other  op-
+              tions are interpreted as follows:
+              --aa     All current limits are reported; no limits are set
+              --bb     The maximum socket buffer size
+              --cc     The maximum size of core files created
+              --dd     The maximum size of a process's data segment
+              --ee     The maximum scheduling priority ("nice")
+              --ff     The  maximum  size  of files written by the shell and its
+                     children
+              --ii     The maximum number of pending signals
+              --kk     The maximum number of kqueues that may be allocated
+              --ll     The maximum size that may be locked into memory
+              --mm     The maximum resident set size (many systems do not  honor
+                     this limit)
+              --nn     The maximum number of open file descriptors (most systems
+                     do not allow this value to be set)
+              --pp     The pipe size in 512-byte blocks (this may not be set)
+              --qq     The maximum number of bytes in POSIX message queues
+              --rr     The maximum real-time scheduling priority
+              --ss     The maximum stack size
+              --tt     The maximum amount of cpu time in seconds
+              --uu     The maximum number of processes  available  to  a  single
+                     user
+              --vv     The  maximum  amount  of  virtual memory available to the
+                     shell and, on some systems, to its children
+              --xx     The maximum number of file locks
+              --PP     The maximum number of pseudoterminals
+              --RR     The maximum time  a  real-time  process  can  run  before
+                     blocking, in microseconds
+              --TT     The maximum number of threads
+
+              If  _l_i_m_i_t  is given, and the --aa option is not used, _l_i_m_i_t is the
+              new value of the specified resource.  If  no  option  is  given,
+              then  --ff is assumed.  Values are in 1024-byte increments, except
+              for --tt, which is in seconds; --RR, which is in  microseconds;  --pp,
+              which  is  in  units of 512-byte blocks; --PP, --TT, --bb, --kk, --nn, and
+              --uu, which are unscaled values; and, when in posix mode,  --cc  and
+              --ff,  which  are  in 512-byte increments.  The return status is 0
+              unless an invalid option or argument is supplied,  or  an  error
+              occurs while setting a new limit.
+
+       uummaasskk [--pp] [--SS] [_m_o_d_e]
+              The user file-creation mask is set to _m_o_d_e.  If _m_o_d_e begins with
+              a digit, it is interpreted as an octal number; otherwise  it  is
+              interpreted  as a symbolic mode mask similar to that accepted by
+              _c_h_m_o_d(1).  If _m_o_d_e is omitted, the current value of the mask  is
+              printed.   The  --SS  option causes the mask to be printed in sym-
+              bolic form; the default output is an octal number.   If  the  --pp
+              option is supplied, and _m_o_d_e is omitted, the output is in a form
+              that may be reused as input.  The return status is 0 if the mode
+              was  successfully  changed  or if no _m_o_d_e argument was supplied,
+              and false otherwise.
+
+       uunnaalliiaass [-aa] [_n_a_m_e ...]
+              Remove each _n_a_m_e from the list of defined  aliases.   If  --aa  is
+              supplied,  all  alias definitions are removed.  The return value
+              is true unless a supplied _n_a_m_e is not a defined alias.
+
+       uunnsseett [-ffvv] [-nn] [_n_a_m_e ...]
+              For each _n_a_m_e, remove the corresponding  variable  or  function.
+              If the --vv option is given, each _n_a_m_e refers to a shell variable,
+              and that variable is removed.  Read-only variables  may  not  be
+              unset.   If  --ff  is specified, each _n_a_m_e refers to a shell func-
+              tion, and the function definition is removed.  If the --nn  option
+              is  supplied, and _n_a_m_e is a variable with the _n_a_m_e_r_e_f attribute,
+              _n_a_m_e will be unset rather than the variable it  references.   --nn
+              has  no  effect if the --ff option is supplied.  If no options are
+              supplied, each _n_a_m_e refers to a variable; if there is  no  vari-
+              able  by that name, a function with that name, if any, is unset.
+              Each unset variable or function is removed from the  environment
+              passed   to   subsequent  commands.   If  any  of  BBAASSHH__AALLIIAASSEESS,
+              BBAASSHH__AARRGGVV00,  BBAASSHH__CCMMDDSS,  BBAASSHH__CCOOMMMMAANNDD,  BBAASSHH__SSUUBBSSHHEELLLL,  BBAASSHHPPIIDD,
+              CCOOMMPP__WWOORRDDBBRREEAAKKSS,  DDIIRRSSTTAACCKK,  EEPPOOCCHHRREEAALLTTIIMMEE,  EEPPOOCCHHSSEECCOONNDDSS, FFUUNNCC--
+              NNAAMMEE, GGRROOUUPPSS, HHIISSTTCCMMDD, LLIINNEENNOO, RRAANNDDOOMM, SSEECCOONNDDSS, or  SSRRAANNDDOOMM  are
+              unset, they lose their special properties, even if they are sub-
+              sequently reset.  The exit status is true unless a _n_a_m_e is read-
+              only.
+
+       wwaaiitt [--ffnn] [--pp _v_a_r_n_a_m_e] [_i_d _._._.]
+              Wait for each specified child process and return its termination
+              status.  Each _i_d may be a process ID or a job specification;  if
+              a  job  spec  is given, all processes in that job's pipeline are
+              waited for.  If _i_d is not given,  wwaaiitt  waits  for  all  running
+              background  jobs  and the last-executed process substitution, if
+              its process id is the same as $$!!, and the return status is zero.
+              If  the  --nn option is supplied, wwaaiitt waits for a single job from
+              the list of _i_ds or, if no _i_ds are supplied, any job, to complete
+              and  returns its exit status.  If none of the supplied arguments
+              is a child of the shell, or if no arguments are supplied and the
+              shell  has no unwaited-for children, the exit status is 127.  If
+              the --pp option is supplied, the process or job identifier of  the
+              job  for  which  the  exit status is returned is assigned to the
+              variable _v_a_r_n_a_m_e named by the  option  argument.   The  variable
+              will  be unset initially, before any assignment.  This is useful
+              only when the --nn option is supplied.  Supplying the  --ff  option,
+              when  job control is enabled, forces wwaaiitt to wait for _i_d to ter-
+              minate before returning its status, instead of returning when it
+              changes  status.  If _i_d specifies a non-existent process or job,
+              the return status is 127.  Otherwise, the return status  is  the
+              exit status of the last process or job waited for.
+
+SSHHEELLLL CCOOMMPPAATTIIBBIILLIITTYY MMOODDEE
+       Bash-4.0 introduced the concept of a `shell compatibility level', spec-
+       ified as a set of options to the shopt builtin ccoommppaatt3311, ccoommppaatt3322, ccoomm--
+       ppaatt4400,  ccoommppaatt4411,  and so on).  There is only one current compatibility
+       level -- each option is mutually exclusive.  The compatibility level is
+       intended  to allow users to select behavior from previous versions that
+       is incompatible with newer versions while they migrate scripts  to  use
+       current  features  and  behavior. It's intended to be a temporary solu-
+       tion.
+
+       This section does not mention behavior that is standard for a  particu-
+       lar  version  (e.g., setting ccoommppaatt3322 means that quoting the rhs of the
+       regexp matching operator quotes special regexp characters in the  word,
+       which is default behavior in bash-3.2 and above).
+
+       If  a  user enables, say, ccoommppaatt3322, it may affect the behavior of other
+       compatibility levels up to  and  including  the  current  compatibility
+       level.   The  idea  is  that each compatibility level controls behavior
+       that changed in that version of bbaasshh, but that behavior may  have  been
+       present  in  earlier versions.  For instance, the change to use locale-
+       based comparisons with the [[[[ command came  in  bash-4.1,  and  earlier
+       versions used ASCII-based comparisons, so enabling ccoommppaatt3322 will enable
+       ASCII-based comparisons as well.  That granularity may  not  be  suffi-
+       cient  for  all uses, and as a result users should employ compatibility
+       levels carefully.  Read the documentation for a particular  feature  to
+       find out the current behavior.
+
+       Bash-4.3  introduced  a new shell variable: BBAASSHH__CCOOMMPPAATT.  The value as-
+       signed to this variable (a decimal version number like 4.2, or an inte-
+       ger  corresponding to the ccoommppaatt_N_N option, like 42) determines the com-
+       patibility level.
+
+       Starting with bash-4.4, Bash has begun deprecating older  compatibility
+       levels.   Eventually, the options will be removed in favor of BBAASSHH__CCOOMM--
+       PPAATT.
+
+       Bash-5.0 is the final version for which there  will  be  an  individual
+       shopt  option for the previous version. Users should use BBAASSHH__CCOOMMPPAATT on
+       bash-5.0 and later versions.
+
+       The following table describes the behavior changes controlled  by  each
+       compatibility level setting.  The ccoommppaatt_N_N tag is used as shorthand for
+       setting the compatibility level to _N_N using one of the following mecha-
+       nisms.   For versions prior to bash-5.0, the compatibility level may be
+       set using the corresponding ccoommppaatt_N_N shopt option.   For  bash-4.3  and
+       later  versions,  the  BBAASSHH__CCOOMMPPAATT variable is preferred, and it is re-
+       quired for bash-5.1 and later versions.
+
+       ccoommppaatt3311
+              +o      quoting the rhs of the [[[[ command's regexp matching oper-
+                     ator (=~) has no special effect
+
+       ccoommppaatt3322
+              +o      interrupting  a  command  list such as "a ; b ; c" causes
+                     the execution  of  the  next  command  in  the  list  (in
+                     bash-4.0  and later versions, the shell acts as if it re-
+                     ceived the interrupt, so interrupting one  command  in  a
+                     list aborts the execution of the entire list)
+
+       ccoommppaatt4400
+              +o      the  <<  and >> operators to the [[[[ command do not consider
+                     the current locale when comparing strings; they use ASCII
+                     ordering.  Bash versions prior to bash-4.1 use ASCII col-
+                     lation and _s_t_r_c_m_p(3); bash-4.1 and later use the  current
+                     locale's collation sequence and _s_t_r_c_o_l_l(3).
+
+       ccoommppaatt4411
+              +o      in  _p_o_s_i_x mode, ttiimmee may be followed by options and still
+                     be recognized as a reserved word (this is POSIX interpre-
+                     tation 267)
+              +o      in _p_o_s_i_x mode, the parser requires that an even number of
+                     single quotes occur in the  _w_o_r_d  portion  of  a  double-
+                     quoted  parameter expansion and treats them specially, so
+                     that characters within the single quotes  are  considered
+                     quoted (this is POSIX interpretation 221)
+
+       ccoommppaatt4422
+              +o      the replacement string in double-quoted pattern substitu-
+                     tion does not undergo quote removal, as it does  in  ver-
+                     sions after bash-4.2
+              +o      in  posix mode, single quotes are considered special when
+                     expanding the _w_o_r_d portion of a  double-quoted  parameter
+                     expansion  and  can  be  used to quote a closing brace or
+                     other special character (this is part of POSIX  interpre-
+                     tation  221);  in  later  versions, single quotes are not
+                     special within double-quoted word expansions
+
+       ccoommppaatt4433
+              +o      the shell does not print a warning message if an  attempt
+                     is  made  to use a quoted compound assignment as an argu-
+                     ment to declare (declare -a foo='(1 2)'). Later  versions
+                     warn that this usage is deprecated
+              +o      word  expansion  errors  are  considered non-fatal errors
+                     that cause the current command to  fail,  even  in  posix
+                     mode  (the  default behavior is to make them fatal errors
+                     that cause the shell to exit)
+              +o      when  executing  a  shell  function,   the   loop   state
+                     (while/until/etc.)  is not reset, so bbrreeaakk or ccoonnttiinnuuee in
+                     that function will break or continue loops in the calling
+                     context.  Bash-4.4 and later reset the loop state to pre-
+                     vent this
+
+       ccoommppaatt4444
+              +o      the shell sets  up  the  values  used  by  BBAASSHH__AARRGGVV  and
+                     BBAASSHH__AARRGGCC  so  they  can expand to the shell's positional
+                     parameters even if extended debugging mode is not enabled
+              +o      a subshell inherits loops from  its  parent  context,  so
+                     bbrreeaakk  or  ccoonnttiinnuuee  will  cause  the  subshell  to exit.
+                     Bash-5.0 and later reset the loop state  to  prevent  the
+                     exit
+              +o      variable  assignments  preceding builtins like eexxppoorrtt and
+                     rreeaaddoonnllyy that set attributes continue to affect variables
+                     with the same name in the calling environment even if the
+                     shell is not in posix mode
+
+       ccoommppaatt5500
+              +o      Bash-5.1 changed the way $$RRAANNDDOOMM is generated  to  intro-
+                     duce slightly more randomness. If the shell compatibility
+                     level is set to 50 or lower, it  reverts  to  the  method
+                     from  bash-5.0 and previous versions, so seeding the ran-
+                     dom number generator by assigning a value to RRAANNDDOOMM  will
+                     produce the same sequence as in bash-5.0
+              +o      If  the  command hash table is empty, bash versions prior
+                     to bash-5.1 printed an informational message to that  ef-
+                     fect,  even  when  producing output that can be reused as
+                     input. Bash-5.1 suppresses that message when the  --ll  op-
+                     tion is supplied.
+
+SSEEEE AALLSSOO
+       bash(1), sh(1)
+
+
+
+GNU Bash 5.0                      2004 Apr 20                 BASH_BUILTINS(1)
diff --git a/doc/builtins.1 b/doc/builtins.1
new file mode 100644
index 0000000..4413c76
--- /dev/null
+++ b/doc/builtins.1
@@ -0,0 +1,24 @@
+.\" This is a hack to force bash builtins into the whatis database
+.\" and to get the list of builtins to come up with the man command.
+.\"
+.\" File Name macro.  This used to be `.PN', for Path Name,
+.\" but Sun doesn't seem to like that very much.
+.\"
+.de FN
+\fI\|\\$1\|\fP
+..
+.TH BASH_BUILTINS 1 "2004 Apr 20" "GNU Bash 5.0"
+.SH NAME
+bash, :, ., [, alias, bg, bind, break, builtin, caller,
+cd, command, compgen, complete,
+compopt, continue, declare, dirs, disown, echo, enable, eval, exec, exit,
+export, false, fc, fg, getopts, hash, help, history, jobs, kill,
+let, local, logout, mapfile, popd, printf, pushd, pwd, read,
+readonly, return, set,
+shift, shopt, source, suspend, test, times, trap, true, type, typeset,
+ulimit, umask, unalias, unset, wait \- bash built-in commands, see \fBbash\fR(1)
+.SH BASH BUILTIN COMMANDS
+.nr zZ 1
+.so bash.1
+.SH SEE ALSO
+bash(1), sh(1)
diff --git a/doc/builtins.ps b/doc/builtins.ps
new file mode 100644
index 0000000..ae11c54
--- /dev/null
+++ b/doc/builtins.ps
@@ -0,0 +1,3318 @@
+%!PS-Adobe-3.0
+%%Creator: groff version 1.22.4
+%%CreationDate: Wed Nov 18 15:13:06 2020
+%%DocumentNeededResources: font Times-Roman
+%%+ font Times-Bold
+%%+ font Times-Italic
+%%+ font Symbol
+%%+ font Courier
+%%DocumentSuppliedResources: procset grops 1.22 4
+%%Pages: 26
+%%PageOrder: Ascend
+%%DocumentMedia: Default 612 792 0 () ()
+%%Orientation: Portrait
+%%EndComments
+%%BeginDefaults
+%%PageMedia: Default
+%%EndDefaults
+%%BeginProlog
+%%BeginResource: procset grops 1.22 4
+%!PS-Adobe-3.0 Resource-ProcSet
+/setpacking where{
+pop
+currentpacking
+true setpacking
+}if
+/grops 120 dict dup begin
+/SC 32 def
+/A/show load def
+/B{0 SC 3 -1 roll widthshow}bind def
+/C{0 exch ashow}bind def
+/D{0 exch 0 SC 5 2 roll awidthshow}bind def
+/E{0 rmoveto show}bind def
+/F{0 rmoveto 0 SC 3 -1 roll widthshow}bind def
+/G{0 rmoveto 0 exch ashow}bind def
+/H{0 rmoveto 0 exch 0 SC 5 2 roll awidthshow}bind def
+/I{0 exch rmoveto show}bind def
+/J{0 exch rmoveto 0 SC 3 -1 roll widthshow}bind def
+/K{0 exch rmoveto 0 exch ashow}bind def
+/L{0 exch rmoveto 0 exch 0 SC 5 2 roll awidthshow}bind def
+/M{rmoveto show}bind def
+/N{rmoveto 0 SC 3 -1 roll widthshow}bind def
+/O{rmoveto 0 exch ashow}bind def
+/P{rmoveto 0 exch 0 SC 5 2 roll awidthshow}bind def
+/Q{moveto show}bind def
+/R{moveto 0 SC 3 -1 roll widthshow}bind def
+/S{moveto 0 exch ashow}bind def
+/T{moveto 0 exch 0 SC 5 2 roll awidthshow}bind def
+/SF{
+findfont exch
+[exch dup 0 exch 0 exch neg 0 0]makefont
+dup setfont
+[exch/setfont cvx]cvx bind def
+}bind def
+/MF{
+findfont
+[5 2 roll
+0 3 1 roll
+neg 0 0]makefont
+dup setfont
+[exch/setfont cvx]cvx bind def
+}bind def
+/level0 0 def
+/RES 0 def
+/PL 0 def
+/LS 0 def
+/MANUAL{
+statusdict begin/manualfeed true store end
+}bind def
+/PLG{
+gsave newpath clippath pathbbox grestore
+exch pop add exch pop
+}bind def
+/BP{
+/level0 save def
+1 setlinecap
+1 setlinejoin
+DEFS/BPhook known{DEFS begin BPhook end}if
+72 RES div dup scale
+LS{
+90 rotate
+}{
+0 PL translate
+}ifelse
+1 -1 scale
+}bind def
+/EP{
+level0 restore
+showpage
+}def
+/DA{
+newpath arcn stroke
+}bind def
+/SN{
+transform
+.25 sub exch .25 sub exch
+round .25 add exch round .25 add exch
+itransform
+}bind def
+/DL{
+SN
+moveto
+SN
+lineto stroke
+}bind def
+/DC{
+newpath 0 360 arc closepath
+}bind def
+/TM matrix def
+/DE{
+TM currentmatrix pop
+translate scale newpath 0 0 .5 0 360 arc closepath
+TM setmatrix
+}bind def
+/RC/rcurveto load def
+/RL/rlineto load def
+/ST/stroke load def
+/MT/moveto load def
+/CL/closepath load def
+/Fr{
+setrgbcolor fill
+}bind def
+/setcmykcolor where{
+pop
+/Fk{
+setcmykcolor fill
+}bind def
+}if
+/Fg{
+setgray fill
+}bind def
+/FL/fill load def
+/LW/setlinewidth load def
+/Cr/setrgbcolor load def
+/setcmykcolor where{
+pop
+/Ck/setcmykcolor load def
+}if
+/Cg/setgray load def
+/RE{
+findfont
+dup maxlength 1 index/FontName known not{1 add}if dict begin
+{
+1 index/FID ne
+2 index/UniqueID ne
+and
+{def}{pop pop}ifelse
+}forall
+/Encoding exch def
+dup/FontName exch def
+currentdict end definefont pop
+}bind def
+/DEFS 0 def
+/EBEGIN{
+moveto
+DEFS begin
+}bind def
+/EEND/end load def
+/CNT 0 def
+/level1 0 def
+/PBEGIN{
+/level1 save def
+translate
+div 3 1 roll div exch scale
+neg exch neg exch translate
+0 setgray
+0 setlinecap
+1 setlinewidth
+0 setlinejoin
+10 setmiterlimit
+[]0 setdash
+/setstrokeadjust where{
+pop
+false setstrokeadjust
+}if
+/setoverprint where{
+pop
+false setoverprint
+}if
+newpath
+/CNT countdictstack def
+userdict begin
+/showpage{}def
+/setpagedevice{}def
+mark
+}bind def
+/PEND{
+cleartomark
+countdictstack CNT sub{end}repeat
+level1 restore
+}bind def
+end def
+/setpacking where{
+pop
+setpacking
+}if
+%%EndResource
+%%EndProlog
+%%BeginSetup
+%%BeginFeature: *PageSize Default
+<< /PageSize [ 612 792 ] /ImagingBBox null >> setpagedevice
+%%EndFeature
+%%IncludeResource: font Times-Roman
+%%IncludeResource: font Times-Bold
+%%IncludeResource: font Times-Italic
+%%IncludeResource: font Symbol
+%%IncludeResource: font Courier
+grops begin/DEFS 1 dict def DEFS begin/u{.001 mul}bind def end/RES 72
+def/PL 792 def/LS false def/ENC0[/asciicircum/asciitilde/Scaron/Zcaron
+/scaron/zcaron/Ydieresis/trademark/quotesingle/Euro/.notdef/.notdef
+/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef
+/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef
+/.notdef/.notdef/space/exclam/quotedbl/numbersign/dollar/percent
+/ampersand/quoteright/parenleft/parenright/asterisk/plus/comma/hyphen
+/period/slash/zero/one/two/three/four/five/six/seven/eight/nine/colon
+/semicolon/less/equal/greater/question/at/A/B/C/D/E/F/G/H/I/J/K/L/M/N/O
+/P/Q/R/S/T/U/V/W/X/Y/Z/bracketleft/backslash/bracketright/circumflex
+/underscore/quoteleft/a/b/c/d/e/f/g/h/i/j/k/l/m/n/o/p/q/r/s/t/u/v/w/x/y
+/z/braceleft/bar/braceright/tilde/.notdef/quotesinglbase/guillemotleft
+/guillemotright/bullet/florin/fraction/perthousand/dagger/daggerdbl
+/endash/emdash/ff/fi/fl/ffi/ffl/dotlessi/dotlessj/grave/hungarumlaut
+/dotaccent/breve/caron/ring/ogonek/quotedblleft/quotedblright/oe/lslash
+/quotedblbase/OE/Lslash/.notdef/exclamdown/cent/sterling/currency/yen
+/brokenbar/section/dieresis/copyright/ordfeminine/guilsinglleft
+/logicalnot/minus/registered/macron/degree/plusminus/twosuperior
+/threesuperior/acute/mu/paragraph/periodcentered/cedilla/onesuperior
+/ordmasculine/guilsinglright/onequarter/onehalf/threequarters
+/questiondown/Agrave/Aacute/Acircumflex/Atilde/Adieresis/Aring/AE
+/Ccedilla/Egrave/Eacute/Ecircumflex/Edieresis/Igrave/Iacute/Icircumflex
+/Idieresis/Eth/Ntilde/Ograve/Oacute/Ocircumflex/Otilde/Odieresis
+/multiply/Oslash/Ugrave/Uacute/Ucircumflex/Udieresis/Yacute/Thorn
+/germandbls/agrave/aacute/acircumflex/atilde/adieresis/aring/ae/ccedilla
+/egrave/eacute/ecircumflex/edieresis/igrave/iacute/icircumflex/idieresis
+/eth/ntilde/ograve/oacute/ocircumflex/otilde/odieresis/divide/oslash
+/ugrave/uacute/ucircumflex/udieresis/yacute/thorn/ydieresis]def
+/Courier@0 ENC0/Courier RE/Times-Italic@0 ENC0/Times-Italic RE
+/Times-Bold@0 ENC0/Times-Bold RE/Times-Roman@0 ENC0/Times-Roman RE
+%%EndSetup
+%%Page: 1 1
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S(SH_B).35 E(UIL)-.1 E 87.61
+(TINS\(1\) General)-.92 F(Commands Manual)2.5 E -.35(BA)90.11 G(SH_B).35
+E(UIL)-.1 E(TINS\(1\))-.92 E/F1 10.95/Times-Bold@0 SF -.219(NA)72 84 S
+(ME).219 E F0 .288(bash, :, ., [, alias, bg, bind, break, b)108 96 R
+.287(uiltin, caller)-.2 F 2.787(,c)-.4 G .287
+(d, command, compgen, complete, compopt, continue, de-)-2.787 F .327
+(clare, dirs, diso)108 108 R .327(wn, echo, enable, e)-.25 F -.25(va)
+-.25 G .327(l, e).25 F -.15(xe)-.15 G .327(c, e).15 F .327(xit, e)-.15 F
+.327(xport, f)-.15 F .327(alse, fc, fg, getopts, hash, help, history)-.1
+F 2.827(,j)-.65 G .328(obs, kill,)-2.827 F .124(let, local, logout, map\
+\214le, popd, printf, pushd, pwd, read, readonly)108 120 R 2.624(,r)-.65
+G .124(eturn, set, shift, shopt, source, suspend,)-2.624 F 1.926(test, \
+times, trap, true, type, typeset, ulimit, umask, unalias, unset, w)108
+132 R 1.927(ait \255 bash b)-.1 F 1.927(uilt-in commands, see)-.2 F/F2
+10/Times-Bold@0 SF(bash)108 144 Q F0(\(1\))A F1 -.329(BA)72 160.8 S
+(SH B).329 E(UIL)-.11 E(TIN COMMANDS)-1.007 E F0 .063
+(Unless otherwise noted, each b)108 172.8 R .062(uiltin command documen\
+ted in this section as accepting options preceded by)-.2 F F2<ad>108
+184.8 Q F0(accepts)3.077 E F2<adad>3.077 E F0 .577
+(to signify the end of the options.)3.077 F(The)5.577 E F2(:)3.077 E F0
+(,)A F2(true)3.077 E F0(,)A F2(false)3.077 E F0 3.077(,a)C(nd)-3.077 E
+F2(test)3.077 E F0(/)A F2([)A F0 -.2(bu)3.077 G .577
+(iltins do not accept options).2 F .462(and do not treat)108 196.8 R F2
+<adad>2.961 E F0(specially)2.961 E 5.461(.T)-.65 G(he)-5.461 E F2(exit)
+2.961 E F0(,)A F2(logout)2.961 E F0(,)A F2 -.18(re)2.961 G(tur).18 E(n)
+-.15 E F0(,)A F2(br)2.961 E(eak)-.18 E F0(,)A F2(continue)2.961 E F0(,)A
+F2(let)2.961 E F0 2.961(,a)C(nd)-2.961 E F2(shift)2.961 E F0 -.2(bu)
+2.961 G .461(iltins accept and).2 F .26(process ar)108 208.8 R .26
+(guments be)-.18 F .26(ginning with)-.15 F F2<ad>2.76 E F0 .261
+(without requiring)2.76 F F2<adad>2.761 E F0 5.261(.O)C .261(ther b)
+-5.261 F .261(uiltins that accept ar)-.2 F .261(guments b)-.18 F .261
+(ut are not)-.2 F 1.154(speci\214ed as accepting options interpret ar)
+108 220.8 R 1.154(guments be)-.18 F 1.154(ginning with)-.15 F F2<ad>
+3.654 E F0 1.154(as in)3.654 F -.25(va)-.4 G 1.154
+(lid options and require).25 F F2<adad>3.654 E F0(to)3.654 E(pre)108
+232.8 Q -.15(ve)-.25 G(nt this interpretation.).15 E F2(:)108 250.8 Q F0
+([)2.5 E/F3 10/Times-Italic@0 SF(ar)A(guments)-.37 E F0(])A .451(No ef)
+144 262.8 R .451(fect; the command does nothing be)-.25 F .452(yond e)
+-.15 F(xpanding)-.15 E F3(ar)3.282 E(guments)-.37 E F0 .452
+(and performing an)3.222 F 2.952(ys)-.15 G(peci\214ed)-2.952 E 2.5
+(redirections. The)144 274.8 R(return status is zero.)2.5 E F2(.)110.5
+291.6 Q F3(\214lename)6.666 E F0([)2.5 E F3(ar)A(guments)-.37 E F0(])A
+F2(sour)108 303.6 Q(ce)-.18 E F3(\214lename)2.5 E F0([)2.5 E F3(ar)A
+(guments)-.37 E F0(])A 1.02(Read and e)144 315.6 R -.15(xe)-.15 G 1.02
+(cute commands from).15 F F3(\214lename)5.43 E F0 1.02
+(in the current shell en)3.7 F 1.02(vironment and return the e)-.4 F
+(xit)-.15 E 1.33(status of the last command e)144 327.6 R -.15(xe)-.15 G
+1.331(cuted from).15 F F3(\214lename)5.741 E F0 6.331(.I).18 G(f)-6.331
+E F3(\214lename)5.741 E F0 1.331(does not contain a slash, \214le-)4.011
+F .489(names in)144 339.6 R/F4 9/Times-Bold@0 SF -.666(PA)2.989 G(TH)
+-.189 E F0 .489(are used to \214nd the directory containing)2.739 F F3
+(\214lename)4.899 E F0 5.488(.T).18 G .488(he \214le searched for in)
+-5.488 F F4 -.666(PA)2.988 G(TH)-.189 E F0 .832(need not be e)144 351.6
+R -.15(xe)-.15 G 3.332(cutable. When).15 F F2(bash)3.332 E F0 .832
+(is not in)3.332 F F3 .832(posix mode)3.332 F F0 3.332(,t)C .833
+(he current directory is searched if no)-3.332 F .982
+(\214le is found in)144 363.6 R F4 -.666(PA)3.481 G(TH)-.189 E/F5 9
+/Times-Roman@0 SF(.)A F0 .981(If the)5.481 F F2(sour)3.481 E(cepath)-.18
+E F0 .981(option to the)3.481 F F2(shopt)3.481 E F0 -.2(bu)3.481 G .981
+(iltin command is turned of).2 F .981(f, the)-.25 F F4 -.666(PA)144
+375.6 S(TH)-.189 E F0 .112(is not searched.)2.362 F .112(If an)5.112 F
+(y)-.15 E F3(ar)2.612 E(guments)-.37 E F0 .112(are supplied, the)2.612 F
+2.612(yb)-.15 G .112(ecome the positional parameters when)-2.612 F F3
+(\214lename)144 387.6 Q F0 .485(is e)2.985 F -.15(xe)-.15 G 2.985
+(cuted. Otherwise).15 F .485(the positional parameters are unchanged.)
+2.985 F .485(If the)5.485 F F2<ad54>2.985 E F0 .485(option is en-)2.985
+F(abled,)144 399.6 Q F2(sour)3.324 E(ce)-.18 E F0 .824(inherits an)3.324
+F 3.324(yt)-.15 G .824(rap on)-3.324 F F2(DEB)3.324 E(UG)-.1 E F0 3.324
+(;i)C 3.324(fi)-3.324 G 3.324(ti)-3.324 G 3.324(sn)-3.324 G .825(ot, an)
+-3.324 F(y)-.15 E F2(DEB)3.325 E(UG)-.1 E F0 .825(trap string is sa)
+3.325 F -.15(ve)-.2 G 3.325(da).15 G .825(nd re-)-3.325 F .817
+(stored around the call to)144 411.6 R F2(sour)3.317 E(ce)-.18 E F0
+3.317(,a)C(nd)-3.317 E F2(sour)3.317 E(ce)-.18 E F0 .817(unsets the)
+3.317 F F2(DEB)3.317 E(UG)-.1 E F0 .817(trap while it e)3.317 F -.15(xe)
+-.15 G 3.317(cutes. If).15 F F2<ad54>3.317 E F0(is)3.317 E 1.435
+(not set, and the sourced \214le changes the)144 423.6 R F2(DEB)3.935 E
+(UG)-.1 E F0 1.435(trap, the ne)3.935 F 3.935(wv)-.25 G 1.435
+(alue is retained when)-4.185 F F2(sour)3.935 E(ce)-.18 E F0 3.763
+(completes. The)144 435.6 R 1.262
+(return status is the status of the last command e)3.763 F 1.262
+(xited within the script \(0 if no)-.15 F(commands are e)144 447.6 Q
+-.15(xe)-.15 G(cuted\), and f).15 E(alse if)-.1 E F3(\214lename)4.41 E
+F0(is not found or cannot be read.)2.68 E F2(alias)108 464.4 Q F0([)2.5
+E F2<ad70>A F0 2.5(][)C F3(name)-2.5 E F0([=)A F3(value)A F0 2.5(].)C
+(..])-2.5 E F2(Alias)144 476.4 Q F0 2.724(with no ar)5.224 F 2.724
+(guments or with the)-.18 F F2<ad70>5.224 E F0 2.724
+(option prints the list of aliases in the form)5.224 F F2(alias)5.225 E
+F3(name)144 488.4 Q F0(=)A F3(value)A F0 .58(on standard output.)3.08 F
+.58(When ar)5.58 F .58
+(guments are supplied, an alias is de\214ned for each)-.18 F F3(name)
+3.08 E F0(whose)144 500.4 Q F3(value)2.508 E F0 .009(is gi)2.508 F -.15
+(ve)-.25 G 2.509(n. A).15 F .009(trailing space in)2.509 F F3(value)
+2.509 E F0 .009(causes the ne)2.509 F .009(xt w)-.15 F .009
+(ord to be check)-.1 F .009(ed for alias substi-)-.1 F .579
+(tution when the alias is e)144 512.4 R 3.079(xpanded. F)-.15 F .579
+(or each)-.15 F F3(name)3.079 E F0 .579(in the ar)3.079 F .579
+(gument list for which no)-.18 F F3(value)3.079 E F0 .578(is sup-)3.078
+F 1.313(plied, the name and v)144 524.4 R 1.314
+(alue of the alias is printed.)-.25 F F2(Alias)6.314 E F0 1.314
+(returns true unless a)3.814 F F3(name)3.814 E F0 1.314(is gi)3.814 F
+-.15(ve)-.25 G 3.814(nf).15 G(or)-3.814 E
+(which no alias has been de\214ned.)144 536.4 Q F2(bg)108 553.2 Q F0([)
+2.5 E F3(jobspec)A F0(...])2.5 E .745(Resume each suspended job)144
+565.2 R F3(jobspec)3.245 E F0 .745
+(in the background, as if it had been started with)3.245 F F2(&)3.244 E
+F0 5.744(.I)C(f)-5.744 E F3(job-)4.984 E(spec)144 577.2 Q F0 .671
+(is not present, the shell')3.481 F 3.171(sn)-.55 G .672(otion of the)
+-3.171 F F3(curr)3.172 E .672(ent job)-.37 F F0 .672(is used.)3.172 F F2
+(bg)5.672 E F3(jobspec)4.912 E F0 .672(returns 0 unless run)3.482 F .419
+(when job control is disabled or)144 589.2 R 2.919(,w)-.4 G .419
+(hen run with job control enabled, an)-2.919 F 2.918(ys)-.15 G
+(peci\214ed)-2.918 E F3(jobspec)2.918 E F0 -.1(wa)2.918 G 2.918(sn).1 G
+(ot)-2.918 E(found or w)144 601.2 Q(as started without job control.)-.1
+E F2(bind)108 618 Q F0([)2.5 E F2<ad6d>A F3 -.1(ke)2.5 G(ymap)-.2 E F0
+2.5(][)C F2(\255lpsvPSVX)-2.5 E F0(])A F2(bind)108 630 Q F0([)2.5 E F2
+<ad6d>A F3 -.1(ke)2.5 G(ymap)-.2 E F0 2.5(][)C F2<ad71>-2.5 E F3
+(function)2.5 E F0 2.5(][)C F2<ad75>-2.5 E F3(function)2.5 E F0 2.5(][)C
+F2<ad72>-2.5 E F3 -.1(ke)2.5 G(yseq)-.2 E F0(])A F2(bind)108 642 Q F0([)
+2.5 E F2<ad6d>A F3 -.1(ke)2.5 G(ymap)-.2 E F0(])A F2<ad66>2.5 E F3
+(\214lename)2.5 E F2(bind)108 654 Q F0([)2.5 E F2<ad6d>A F3 -.1(ke)2.5 G
+(ymap)-.2 E F0(])A F2<ad78>2.5 E F3 -.1(ke)2.5 G(yseq)-.2 E F0(:)A F3
+(shell\255command)A F2(bind)108 666 Q F0([)2.5 E F2<ad6d>A F3 -.1(ke)2.5
+G(ymap)-.2 E F0(])A F3 -.1(ke)2.5 G(yseq)-.2 E F0(:)A F3
+(function\255name)A F2(bind)108 678 Q F0([)2.5 E F2<ad6d>A F3 -.1(ke)2.5
+G(ymap)-.2 E F0(])A F3 -.1(ke)2.5 G(yseq)-.2 E F0(:)A F3 -.37(re)C
+(adline\255command).37 E F0 .238(Display current)144 690 R F2 -.18(re)
+2.738 G(adline).18 E F0 -.1(ke)2.738 G 2.738(ya)-.05 G .239
+(nd function bindings, bind a k)-2.738 F .539 -.15(ey s)-.1 H .239
+(equence to a).15 F F2 -.18(re)2.739 G(adline).18 E F0 .239(function or)
+2.739 F .476(macro, or set a)144 702 R F2 -.18(re)2.976 G(adline).18 E
+F0 -.25(va)2.976 G 2.976(riable. Each).25 F .476(non-option ar)2.976 F
+.475(gument is a command as it w)-.18 F .475(ould appear in)-.1 F F3
+(.inputr)144.23 714 Q(c)-.37 E F0 2.967(,b).31 G .467
+(ut each binding or command must be passed as a separate ar)-3.167 F
+.468(gument; e.g., '"\\C\255x\\C\255r":)-.18 F 2.5
+(re\255read\255init\255\214le'. Options,)144 726 R(if supplied, ha)2.5 E
+.3 -.15(ve t)-.2 H(he follo).15 E(wing meanings:)-.25 E(GNU Bash 5.0)72
+768 Q(2004 Apr 20)149.565 E(1)203.725 E 0 Cg EP
+%%Page: 2 2
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S(SH_B).35 E(UIL)-.1 E 87.61
+(TINS\(1\) General)-.92 F(Commands Manual)2.5 E -.35(BA)90.11 G(SH_B).35
+E(UIL)-.1 E(TINS\(1\))-.92 E/F1 10/Times-Bold@0 SF<ad6d>144 84 Q/F2 10
+/Times-Italic@0 SF -.1(ke)2.5 G(ymap)-.2 E F0(Use)180 96 Q F2 -.1(ke)
+5.159 G(ymap)-.2 E F0 2.659(as the k)5.349 F -.15(ey)-.1 G 2.658
+(map to be af).15 F 2.658(fected by the subsequent bindings.)-.25 F
+(Acceptable)7.658 E F2 -.1(ke)180 108 S(ymap)-.2 E F0 3.192(names are)
+5.882 F F2 3.192(emacs, emacs\255standar)5.692 F 3.193
+(d, emacs\255meta, emacs\255ctlx, vi, vi\255mo)-.37 F(ve)-.1 E(,)-.1 E
+(vi\255command)180 120 Q F0 4.09(,a)C(nd)-4.09 E F2(vi\255insert)4.38 E
+F0(.).68 E F2(vi)6.589 E F0 1.589(is equi)4.089 F -.25(va)-.25 G 1.589
+(lent to).25 F F2(vi\255command)4.089 E F0(\()4.089 E F2(vi\255mo)A(ve)
+-.1 E F0 1.589(is also a syn-)4.089 F(on)180 132 Q(ym\);)-.15 E F2
+(emacs)2.5 E F0(is equi)2.5 E -.25(va)-.25 G(lent to).25 E F2
+(emacs\255standar)2.5 E(d)-.37 E F0(.)A F1<ad6c>144 144 Q F0
+(List the names of all)180 144 Q F1 -.18(re)2.5 G(adline).18 E F0
+(functions.)2.5 E F1<ad70>144 156 Q F0(Display)180 156 Q F1 -.18(re)2.5
+G(adline).18 E F0(function names and bindings in such a w)2.5 E
+(ay that the)-.1 E 2.5(yc)-.15 G(an be re-read.)-2.5 E F1<ad50>144 168 Q
+F0(List current)180 168 Q F1 -.18(re)2.5 G(adline).18 E F0
+(function names and bindings.)2.5 E F1<ad73>144 180 Q F0(Display)180 180
+Q F1 -.18(re)3.655 G(adline).18 E F0 -.1(ke)3.655 G 3.655(ys)-.05 G
+1.155(equences bound to macros and the strings the)-3.655 F 3.655(yo)
+-.15 G 1.155(utput in such a)-3.655 F -.1(wa)180 192 S 2.5(yt).1 G
+(hat the)-2.5 E 2.5(yc)-.15 G(an be re-read.)-2.5 E F1<ad53>144 204 Q F0
+(Display)180 204 Q F1 -.18(re)2.5 G(adline).18 E F0 -.1(ke)2.5 G 2.5(ys)
+-.05 G(equences bound to macros and the strings the)-2.5 E 2.5(yo)-.15 G
+(utput.)-2.5 E F1<ad76>144 216 Q F0(Display)180 216 Q F1 -.18(re)2.5 G
+(adline).18 E F0 -.25(va)2.5 G(riable names and v).25 E
+(alues in such a w)-.25 E(ay that the)-.1 E 2.5(yc)-.15 G
+(an be re-read.)-2.5 E F1<ad56>144 228 Q F0(List current)180 228 Q F1
+-.18(re)2.5 G(adline).18 E F0 -.25(va)2.5 G(riable names and v).25 E
+(alues.)-.25 E F1<ad66>144 240 Q F2(\214lename)2.5 E F0(Read k)180 252 Q
+.3 -.15(ey b)-.1 H(indings from).15 E F2(\214lename)2.5 E F0(.)A F1
+<ad71>144 264 Q F2(function)2.5 E F0(Query about which k)180 276 Q -.15
+(ey)-.1 G 2.5(si).15 G -1.9 -.4(nv o)-2.5 H .2 -.1(ke t).4 H(he named).1
+E F2(function)2.5 E F0(.)A F1<ad75>144 288 Q F2(function)2.5 E F0
+(Unbind all k)180 300 Q -.15(ey)-.1 G 2.5(sb).15 G(ound to the named)
+-2.5 E F2(function)2.5 E F0(.)A F1<ad72>144 312 Q F2 -.1(ke)2.5 G(yseq)
+-.2 E F0(Remo)180 324 Q .3 -.15(ve a)-.15 H .3 -.15(ny c).15 H
+(urrent binding for).15 E F2 -.1(ke)2.5 G(yseq)-.2 E F0(.)A F1<ad78>144
+336 Q F2 -.1(ke)2.5 G(yseq)-.2 E F1(:)A F2(shell\255command)A F0(Cause)
+180 348 Q F2(shell\255command)4.325 E F0 1.825(to be e)4.325 F -.15(xe)
+-.15 G 1.825(cuted whene).15 F -.15(ve)-.25 G(r).15 E F2 -.1(ke)4.325 G
+(yseq)-.2 E F0 1.825(is entered.)4.325 F(When)6.825 E F2(shell\255com-)
+4.325 E(mand)180 360 Q F0 1.764(is e)4.264 F -.15(xe)-.15 G 1.765
+(cuted, the shell sets the).15 F/F3 9/Times-Bold@0 SF(READLINE_LINE)
+4.265 E F0 -.25(va)4.015 G 1.765(riable to the contents of the).25 F F1
+-.18(re)180 372 S(adline).18 E F0 .375(line b)2.875 F(uf)-.2 E .375
+(fer and the)-.25 F F3(READLINE_POINT)2.875 E F0(and)2.625 E F3
+(READLINE_MARK)2.875 E F0 -.25(va)2.625 G .375(riables to the).25 F
+1.185(current location of the insertion point and the sa)180 384 R -.15
+(ve)-.2 G 3.686(di).15 G 1.186(nsertion point \(the mark\), respec-)
+-3.686 F(ti)180 396 Q -.15(ve)-.25 G(ly).15 E 5.702(.I)-.65 G 3.202(ft)
+-5.702 G .702(he e)-3.202 F -.15(xe)-.15 G .702
+(cuted command changes the v).15 F .701(alue of an)-.25 F 3.201(yo)-.15
+G(f)-3.201 E F3(READLINE_LINE)3.201 E/F4 9/Times-Roman@0 SF(,)A F3
+(READ-)2.951 E(LINE_POINT)180 408 Q F4(,)A F0(or)3.58 E F3
+(READLINE_MARK)3.83 E F4(,)A F0 1.33(those ne)3.58 F 3.83(wv)-.25 G
+1.331(alues will be re\215ected in the editing)-4.08 F(state.)180 420 Q
+F1<ad58>144 432 Q F0 .83(List all k)180 432 R 1.13 -.15(ey s)-.1 H .829
+(equences bound to shell commands and the associated commands in a for)
+.15 F(-)-.2 E(mat that can be reused as input.)180 444 Q(The return v)
+144 460.8 Q(alue is 0 unless an unrecognized option is gi)-.25 E -.15
+(ve)-.25 G 2.5(no).15 G 2.5(ra)-2.5 G 2.5(ne)-2.5 G(rror occurred.)-2.5
+E F1(br)108 477.6 Q(eak)-.18 E F0([)2.5 E F2(n)A F0(])A .054
+(Exit from within a)144 489.6 R F1 -.25(fo)2.554 G(r).25 E F0(,)A F1
+(while)2.554 E F0(,)A F1(until)2.555 E F0 2.555(,o)C(r)-2.555 E F1
+(select)2.555 E F0 2.555(loop. If)2.555 F F2(n)2.555 E F0 .055
+(is speci\214ed, break)2.555 F F2(n)2.555 E F0(le)2.555 E -.15(ve)-.25 G
+(ls.).15 E F2(n)5.415 E F0 .055(must be)2.795 F/F5 10/Symbol SF<b3>2.555
+E F0(1.)2.555 E(If)144 501.6 Q F2(n)3.075 E F0 .215(is greater than the\
+ number of enclosing loops, all enclosing loops are e)2.955 F 2.714
+(xited. The)-.15 F .214(return v)2.714 F(alue)-.25 E(is 0 unless)144
+513.6 Q F2(n)2.5 E F0(is not greater than or equal to 1.)2.5 E F1 -.2
+(bu)108 530.4 S(iltin).2 E F2(shell\255b)2.5 E(uiltin)-.2 E F0([)2.5 E
+F2(ar)A(guments)-.37 E F0(])A(Ex)144 542.4 Q .77
+(ecute the speci\214ed shell b)-.15 F .77(uiltin, passing it)-.2 F F2
+(ar)3.601 E(guments)-.37 E F0 3.271(,a).27 G .771(nd return its e)-3.271
+F .771(xit status.)-.15 F .771(This is useful)5.771 F .616
+(when de\214ning a function whose name is the same as a shell b)144
+554.4 R .615(uiltin, retaining the functionality of)-.2 F .57(the b)144
+566.4 R .57(uiltin within the function.)-.2 F(The)5.57 E F1(cd)3.07 E F0
+-.2(bu)3.07 G .57(iltin is commonly rede\214ned this w).2 F(ay)-.1 E
+5.57(.T)-.65 G .57(he return status)-5.57 F(is f)144 578.4 Q(alse if)-.1
+E F2(shell\255b)2.84 E(uiltin)-.2 E F0(is not a shell b)2.74 E
+(uiltin command.)-.2 E F1(caller)108 595.2 Q F0([)2.5 E F2 -.2(ex)C(pr)
+.2 E F0(])A .254(Returns the conte)144 607.2 R .254(xt of an)-.15 F
+2.754(ya)-.15 G(cti)-2.754 E .554 -.15(ve s)-.25 H .254
+(ubroutine call \(a shell function or a script e).15 F -.15(xe)-.15 G
+.254(cuted with the).15 F F1(.)2.753 E F0(or)2.753 E F1(sour)144 619.2 Q
+(ce)-.18 E F0 -.2(bu)2.824 G 2.824(iltins\). W).2 F(ithout)-.4 E F2 -.2
+(ex)2.824 G(pr).2 E F0(,)A F1(caller)2.824 E F0 .324
+(displays the line number and source \214lename of the current)2.824 F
+.254(subroutine call.)144 631.2 R .254(If a non-ne)5.254 F -.05(ga)-.15
+G(ti).05 E .554 -.15(ve i)-.25 H(nte).15 E .253(ger is supplied as)-.15
+F F2 -.2(ex)2.753 G(pr).2 E F0(,)A F1(caller)2.753 E F0 .253
+(displays the line number)2.753 F 2.753(,s)-.4 G(ub-)-2.753 E 1.327(rou\
+tine name, and source \214le corresponding to that position in the curr\
+ent e)144 643.2 R -.15(xe)-.15 G 1.328(cution call stack.).15 F .001
+(This e)144 655.2 R .001(xtra information may be used, for e)-.15 F .001
+(xample, to print a stack trace.)-.15 F(The current frame is frame)5 E
+3.019(0. The)144 667.2 R .519(return v)3.019 F .519
+(alue is 0 unless the shell is not e)-.25 F -.15(xe)-.15 G .52
+(cuting a subroutine call or).15 F F2 -.2(ex)3.02 G(pr).2 E F0 .52
+(does not corre-)3.02 F(spond to a v)144 679.2 Q
+(alid position in the call stack.)-.25 E F1(cd)108 696 Q F0([)2.5 E F1
+<ad4c>A F0(|[)A F1<ad50>A F0([)2.5 E F1<ad65>A F0(]] [\255@]] [)A F2
+(dir)A F0(])A .322(Change the current directory to)144 708 R F2(dir)
+2.822 E F0 5.322(.i)C(f)-5.322 E F2(dir)2.822 E F0 .321
+(is not supplied, the v)2.822 F .321(alue of the)-.25 F F3(HOME)2.821 E
+F0 .321(shell v)2.571 F .321(ariable is)-.25 F 1.035(the def)144 720 R
+3.535(ault. An)-.1 F 3.535(ya)-.15 G 1.035(dditional ar)-3.535 F 1.035
+(guments follo)-.18 F(wing)-.25 E F2(dir)3.535 E F0 1.035(are ignored.)
+3.535 F 1.036(The v)6.035 F(ariable)-.25 E F3(CDP)3.536 E -.855(AT)-.666
+G(H).855 E F0(de\214nes)3.286 E(GNU Bash 5.0)72 768 Q(2004 Apr 20)
+149.565 E(2)203.725 E 0 Cg EP
+%%Page: 3 3
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S(SH_B).35 E(UIL)-.1 E 87.61
+(TINS\(1\) General)-.92 F(Commands Manual)2.5 E -.35(BA)90.11 G(SH_B).35
+E(UIL)-.1 E(TINS\(1\))-.92 E .827
+(the search path for the directory containing)144 84 R/F1 10
+/Times-Italic@0 SF(dir)3.676 E F0 3.326(:e).73 G .826
+(ach directory name in)-3.326 F/F2 9/Times-Bold@0 SF(CDP)3.326 E -.855
+(AT)-.666 G(H).855 E F0 .826(is searched for)3.076 F F1(dir)144 96 Q F0
+5.664(.A)C(lternati)-5.664 E .964 -.15(ve d)-.25 H .665
+(irectory names in).15 F F2(CDP)3.165 E -.855(AT)-.666 G(H).855 E F0
+.665(are separated by a colon \(:\).)2.915 F 3.165(An)5.665 G .665
+(ull directory name)-3.165 F(in)144 108 Q F2(CDP)3.102 E -.855(AT)-.666
+G(H).855 E F0 .602(is the same as the current directory)2.852 F 3.102
+(,i)-.65 G .602(.e., `)-3.102 F(`)-.74 E/F3 10/Times-Bold@0 SF(.)A F0
+-.74('')C 5.602(.I).74 G(f)-5.602 E F1(dir)3.451 E F0(be)3.831 E .601
+(gins with a slash \(/\), then)-.15 F F2(CD-)3.101 E -.666(PA)144 120 S
+(TH)-.189 E F0 1.003(is not used.)3.253 F(The)6.003 E F3<ad50>3.503 E F0
+1.003(option causes)3.503 F F3(cd)3.503 E F0 1.003(to use the ph)3.503 F
+1.003(ysical directory structure by resolving)-.05 F .123
+(symbolic links while tra)144 132 R -.15(ve)-.2 G(rsing).15 E F1(dir)
+2.623 E F0 .123(and before processing instances of)2.623 F F1(..)2.623 E
+F0(in)2.623 E F1(dir)2.623 E F0 .123(\(see also the)2.623 F F3<ad50>
+2.623 E F0(op-)2.622 E .429(tion to the)144 144 R F3(set)2.929 E F0 -.2
+(bu)2.929 G .429(iltin command\); the).2 F F3<ad4c>2.929 E F0 .43
+(option forces symbolic links to be follo)2.929 F .43(wed by resolving)
+-.25 F .473(the link after processing instances of)144 156 R F1(..)2.973
+E F0(in)2.973 E F1(dir)2.973 E F0 5.473(.I)C(f)-5.473 E F1(..)2.973 E F0
+.473(appears in)2.973 F F1(dir)2.972 E F0 2.972(,i)C 2.972(ti)-2.972 G
+2.972(sp)-2.972 G .472(rocessed by remo)-2.972 F .472(ving the)-.15 F
+.948(immediately pre)144 168 R .948(vious pathname component from)-.25 F
+F1(dir)3.448 E F0 3.448(,b)C .948(ack to a slash or the be)-3.448 F .948
+(ginning of)-.15 F F1(dir)3.448 E F0 5.948(.I)C(f)-5.948 E(the)144 180 Q
+F3<ad65>2.868 E F0 .368(option is supplied with)2.868 F F3<ad50>2.868 E
+F0 2.868(,a)C .368(nd the current w)-2.868 F .368
+(orking directory cannot be successfully deter)-.1 F(-)-.2 E .612
+(mined after a successful directory change,)144 192 R F3(cd)3.112 E F0
+.612(will return an unsuccessful status.)3.112 F .613(On systems that)
+5.612 F .354(support it, the)144 204 R F3<ad40>2.854 E F0 .354
+(option presents the e)2.854 F .354(xtended attrib)-.15 F .354
+(utes associated with a \214le as a directory)-.2 F 5.353(.A)-.65 G(n)
+-5.353 E(ar)144 216 Q .072(gument of)-.18 F F3<ad>2.572 E F0 .072
+(is con)2.572 F -.15(ve)-.4 G .072(rted to).15 F F2($OLDPWD)2.572 E F0
+.072(before the directory change is attempted.)2.322 F .072
+(If a non-empty)5.072 F .055(directory name from)144 228 R F2(CDP)2.555
+E -.855(AT)-.666 G(H).855 E F0 .055(is used, or if)2.305 F F3<ad>2.555 E
+F0 .055(is the \214rst ar)2.555 F .054
+(gument, and the directory change is suc-)-.18 F .168
+(cessful, the absolute pathname of the ne)144 240 R 2.668(ww)-.25 G .168
+(orking directory is written to the standard output.)-2.768 F(The)5.168
+E(return v)144 252 Q(alue is true if the directory w)-.25 E
+(as successfully changed; f)-.1 E(alse otherwise.)-.1 E F3(command)108
+268.8 Q F0([)2.5 E F3(\255pVv)A F0(])A F1(command)2.5 E F0([)2.5 E F1
+(ar)A(g)-.37 E F0(...])2.5 E(Run)144 280.8 Q F1(command)2.765 E F0(with)
+3.335 E F1(ar)2.895 E(gs)-.37 E F0 .065
+(suppressing the normal shell function lookup.)2.835 F .064(Only b)5.064
+F .064(uiltin commands or)-.2 F .501(commands found in the)144 292.8 R
+F2 -.666(PA)3.001 G(TH)-.189 E F0 .502(are e)2.751 F -.15(xe)-.15 G
+3.002(cuted. If).15 F(the)3.002 E F3<ad70>3.002 E F0 .502(option is gi)
+3.002 F -.15(ve)-.25 G .502(n, the search for).15 F F1(command)3.202 E
+F0(is)3.772 E .4(performed using a def)144 304.8 R .4(ault v)-.1 F .4
+(alue for)-.25 F F2 -.666(PA)2.9 G(TH)-.189 E F0 .399
+(that is guaranteed to \214nd all of the standard utilities.)2.649 F(If)
+5.399 E .174(either the)144 316.8 R F3<ad56>2.674 E F0(or)2.674 E F3
+<ad76>2.674 E F0 .175(option is supplied, a description of)2.674 F F1
+(command)2.875 E F0 .175(is printed.)3.445 F(The)5.175 E F3<ad76>2.675 E
+F0 .175(option causes)2.675 F 3.318(as)144 328.8 S .818(ingle w)-3.318 F
+.817(ord indicating the command or \214lename used to in)-.1 F -.2(vo)
+-.4 G -.1(ke).2 G F1(command)3.617 E F0 .817(to be displayed; the)4.087
+F F3<ad56>144 340.8 Q F0 .249(option produces a more v)2.749 F .249
+(erbose description.)-.15 F .249(If the)5.249 F F3<ad56>2.749 E F0(or)
+2.749 E F3<ad76>2.75 E F0 .25(option is supplied, the e)2.75 F .25
+(xit status)-.15 F 1.005(is 0 if)144 352.8 R F1(command)3.705 E F0 -.1
+(wa)4.275 G 3.505(sf).1 G 1.005(ound, and 1 if not.)-3.505 F 1.004
+(If neither option is supplied and an error occurred or)6.005 F F1
+(command)144.2 364.8 Q F0 1.598(cannot be found, the e)4.868 F 1.599
+(xit status is 127.)-.15 F 1.599(Otherwise, the e)6.599 F 1.599
+(xit status of the)-.15 F F3(command)4.099 E F0 -.2(bu)144 376.8 S
+(iltin is the e).2 E(xit status of)-.15 E F1(command)2.7 E F0(.).77 E F3
+(compgen)108 393.6 Q F0([)2.5 E F1(option)A F0 2.5(][)C F1(wor)-2.5 E(d)
+-.37 E F0(])A .013(Generate possible completion matches for)144 405.6 R
+F1(wor)2.513 E(d)-.37 E F0 .013(according to the)2.513 F F1(option)2.513
+E F0 .013(s, which may be an)B 2.512(yo)-.15 G(ption)-2.512 E .981
+(accepted by the)144 417.6 R F3(complete)3.481 E F0 -.2(bu)3.481 G .981
+(iltin with the e).2 F .981(xception of)-.15 F F3<ad70>3.481 E F0(and)
+3.481 E F3<ad72>3.481 E F0 3.481(,a)C .982(nd write the matches to the)
+-3.481 F .131(standard output.)144 429.6 R .131(When using the)5.131 F
+F3<ad46>2.631 E F0(or)2.631 E F3<ad43>2.631 E F0 .131(options, the v)
+2.631 F .13(arious shell v)-.25 F .13(ariables set by the program-)-.25
+F(mable completion f)144 441.6 Q(acilities, while a)-.1 E -.25(va)-.2 G
+(ilable, will not ha).25 E .3 -.15(ve u)-.2 H(seful v).15 E(alues.)-.25
+E .352(The matches will be generated in the same w)144 465.6 R .352
+(ay as if the programmable completion code had gen-)-.1 F .02(erated th\
+em directly from a completion speci\214cation with the same \215ags.)144
+477.6 R(If)5.02 E F1(wor)2.52 E(d)-.37 E F0 .02(is speci\214ed, only)
+2.52 F(those completions matching)144 489.6 Q F1(wor)2.5 E(d)-.37 E F0
+(will be displayed.)2.5 E(The return v)144 513.6 Q
+(alue is true unless an in)-.25 E -.25(va)-.4 G
+(lid option is supplied, or no matches were generated.).25 E F3
+(complete)108 530.4 Q F0([)2.5 E F3(\255abcdefgjksuv)A F0 2.5(][)C F3
+<ad6f>-2.5 E F1(comp-option)2.5 E F0 2.5(][)C F3(\255DEI)-2.5 E F0 2.5
+(][)C F3<ad41>-2.5 E F1(action)2.5 E F0 2.5(][)C F3<ad47>-2.5 E F1
+(globpat)2.5 E F0 2.5(][)C F3<ad57>-2.5 E F1(wor)2.5 E(dlist)-.37 E F0
+(])A([)144 542.4 Q F3<ad46>A F1(function)2.5 E F0 2.5(][)C F3<ad43>-2.5
+E F1(command)2.5 E F0 2.5(][)C F3<ad58>-2.5 E F1(\214lterpat)2.5 E F0
+2.5(][)C F3<ad50>-2.5 E F1(pr)2.5 E(e\214x)-.37 E F0 2.5(][)C F3<ad53>
+-2.5 E F1(suf)2.5 E<8c78>-.18 E F0(])A F1(name)2.5 E F0([)2.5 E F1
+(name ...)A F0(])A F3(complete \255pr)108 554.4 Q F0([)2.5 E F3(\255DEI)
+A F0 2.5(][)C F1(name)-2.5 E F0(...])2.5 E .633(Specify ho)144 566.4 R
+3.133(wa)-.25 G -.18(rg)-3.133 G .633(uments to each).18 F F1(name)3.133
+E F0 .633(should be completed.)3.133 F .634(If the)5.634 F F3<ad70>3.134
+E F0 .634(option is supplied, or if no)3.134 F .14
+(options are supplied, e)144 578.4 R .139
+(xisting completion speci\214cations are printed in a w)-.15 F .139
+(ay that allo)-.1 F .139(ws them to be)-.25 F .31(reused as input.)144
+590.4 R(The)5.31 E F3<ad72>2.81 E F0 .31(option remo)2.81 F -.15(ve)-.15
+G 2.81(sac).15 G .31(ompletion speci\214cation for each)-2.81 F F1(name)
+2.81 E F0 2.81(,o)C 1.11 -.4(r, i)-2.81 H 2.81(fn).4 G(o)-2.81 E F1
+(name)2.81 E F0(s)A 1.208
+(are supplied, all completion speci\214cations.)144 602.4 R(The)6.208 E
+F3<ad44>3.708 E F0 1.207(option indicates that other supplied options)
+3.707 F .5(and actions should apply to the `)144 614.4 R(`def)-.74 E
+(ault')-.1 E 3('c)-.74 G .5
+(ommand completion; that is, completion attempted on)-3 F 3.455(ac)144
+626.4 S .955(ommand for which no completion has pre)-3.455 F .955
+(viously been de\214ned.)-.25 F(The)5.955 E F3<ad45>3.455 E F0 .955
+(option indicates that)3.455 F .876
+(other supplied options and actions should apply to `)144 638.4 R
+(`empty')-.74 E 3.376('c)-.74 G .876(ommand completion; that is, com-)
+-3.376 F .448(pletion attempted on a blank line.)144 650.4 R(The)5.447 E
+F3<ad49>2.947 E F0 .447
+(option indicates that other supplied options and actions)2.947 F .123
+(should apply to completion on the initial non-assignment w)144 662.4 R
+.123(ord on the line, or after a command de-)-.1 F 1.021
+(limiter such as)144 674.4 R F3(;)3.521 E F0(or)3.521 E F3(|)3.521 E F0
+3.521(,w)C 1.021(hich is usually command name completion.)-3.521 F 1.02
+(If multiple options are sup-)6.02 F .707(plied, the)144 686.4 R F3
+<ad44>3.207 E F0 .707(option tak)3.207 F .707(es precedence o)-.1 F -.15
+(ve)-.15 G(r).15 E F3<ad45>3.208 E F0 3.208(,a)C .708(nd both tak)-3.208
+F 3.208(ep)-.1 G .708(recedence o)-3.208 F -.15(ve)-.15 G(r).15 E F3
+<ad49>3.208 E F0 5.708(.I)C 3.208(fa)-5.708 G 1.008 -.15(ny o)-3.208 H
+(f).15 E F3<ad44>3.208 E F0(,)A F3<ad45>144 698.4 Q F0 2.604(,o)C(r)
+-2.604 E F3<ad49>2.604 E F0 .103(are supplied, an)2.603 F 2.603(yo)-.15
+G(ther)-2.603 E F1(name)2.603 E F0(ar)2.603 E .103
+(guments are ignored; these completions only apply to the)-.18 F
+(case speci\214ed by the option.)144 710.4 Q(GNU Bash 5.0)72 768 Q
+(2004 Apr 20)149.565 E(3)203.725 E 0 Cg EP
+%%Page: 4 4
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S(SH_B).35 E(UIL)-.1 E 87.61
+(TINS\(1\) General)-.92 F(Commands Manual)2.5 E -.35(BA)90.11 G(SH_B).35
+E(UIL)-.1 E(TINS\(1\))-.92 E .152
+(The process of applying these completion speci\214cations when w)144 84
+R .153(ord completion is attempted is de-)-.1 F(scribed abo)144 96 Q .3
+-.15(ve u)-.15 H(nder).15 E/F1 10/Times-Bold@0 SF(Pr)2.5 E
+(ogrammable Completion)-.18 E F0(.)A .556
+(Other options, if speci\214ed, ha)144 120 R .856 -.15(ve t)-.2 H .555
+(he follo).15 F .555(wing meanings.)-.25 F .555(The ar)5.555 F .555
+(guments to the)-.18 F F1<ad47>3.055 E F0(,)A F1<ad57>3.055 E F0 3.055
+(,a)C(nd)-3.055 E F1<ad58>3.055 E F0 .722(options \(and, if necessary)
+144 132 R 3.222(,t)-.65 G(he)-3.222 E F1<ad50>3.222 E F0(and)3.222 E F1
+<ad53>3.222 E F0 .723(options\) should be quoted to protect them from e)
+3.222 F(xpan-)-.15 E(sion before the)144 144 Q F1(complete)2.5 E F0 -.2
+(bu)2.5 G(iltin is in).2 E -.2(vo)-.4 G -.1(ke).2 G(d.).1 E F1<ad6f>144
+156 Q/F2 10/Times-Italic@0 SF(comp-option)2.5 E F0(The)184 168 Q F2
+(comp-option)2.791 E F0 .291(controls se)2.791 F -.15(ve)-.25 G .291
+(ral aspects of the compspec').15 F 2.791(sb)-.55 G(eha)-2.791 E .291
+(vior be)-.2 F .291(yond the simple)-.15 F(generation of completions.)
+184 180 Q F2(comp-option)5 E F0(may be one of:)2.5 E F1(bashdefault)184
+192 Q F0 .281(Perform the rest of the def)224 204 R(ault)-.1 E F1(bash)
+2.781 E F0 .281(completions if the compspec generates no)2.781 F
+(matches.)224 216 Q F1(default)184 228 Q F0 2.876(Use readline')224 228
+R 5.376(sd)-.55 G(ef)-5.376 E 2.875
+(ault \214lename completion if the compspec generates no)-.1 F(matches.)
+224 240 Q F1(dir)184 252 Q(names)-.15 E F0(Perform directory name compl\
+etion if the compspec generates no matches.)224 264 Q F1(\214lenames)184
+276 Q F0 -.7(Te)224 288 S .137(ll readline that the compspec generates \
+\214lenames, so it can perform an).7 F 2.637<798c>-.15 G(le-)-2.637 E
+.134(name\255speci\214c processing \(lik)224 300 R 2.634(ea)-.1 G .134
+(dding a slash to directory names, quoting spe-)-2.634 F .45
+(cial characters, or suppressing trailing spaces\).)224 312 R .45
+(Intended to be used with shell)5.45 F(functions.)224 324 Q F1(noquote)
+184 336 Q F0 -.7(Te)224 336 S .814
+(ll readline not to quote the completed w).7 F .814(ords if the)-.1 F
+3.314(ya)-.15 G .814(re \214lenames \(quoting)-3.314 F
+(\214lenames is the def)224 348 Q(ault\).)-.1 E F1(nosort)184 360 Q F0
+-.7(Te)224 360 S(ll readline not to sort the list of possible completio\
+ns alphabetically).7 E(.)-.65 E F1(nospace)184 372 Q F0 -.7(Te)224 372 S
+.22(ll readline not to append a space \(the def).7 F .22(ault\) to w)-.1
+F .22(ords completed at the end)-.1 F(of the line.)224 384 Q F1
+(plusdirs)184 396 Q F0 1.985(After an)224 396 R 4.485(ym)-.15 G 1.985
+(atches de\214ned by the compspec are generated, directory name)-4.485 F
+.583(completion is attempted and an)224 408 R 3.084(ym)-.15 G .584
+(atches are added to the results of the other)-3.084 F(actions.)224 420
+Q F1<ad41>144 432 Q F2(action)2.5 E F0(The)184 444 Q F2(action)2.5 E F0
+(may be one of the follo)2.5 E
+(wing to generate a list of possible completions:)-.25 E F1(alias)184
+456 Q F0(Alias names.)224 456 Q(May also be speci\214ed as)5 E F1<ad61>
+2.5 E F0(.)A F1(arrayv)184 468 Q(ar)-.1 E F0(Array v)224 480 Q
+(ariable names.)-.25 E F1(binding)184 492 Q(Readline)224 492 Q F0 -.1
+(ke)2.5 G 2.5(yb)-.05 G(inding names.)-2.5 E F1 -.2(bu)184 504 S(iltin)
+.2 E F0(Names of shell b)224 504 Q(uiltin commands.)-.2 E
+(May also be speci\214ed as)5 E F1<ad62>2.5 E F0(.)A F1(command)184 516
+Q F0(Command names.)224 528 Q(May also be speci\214ed as)5 E F1<ad63>2.5
+E F0(.)A F1(dir)184 540 Q(ectory)-.18 E F0(Directory names.)224 552 Q
+(May also be speci\214ed as)5 E F1<ad64>2.5 E F0(.)A F1(disabled)184 564
+Q F0(Names of disabled shell b)224 576 Q(uiltins.)-.2 E F1(enabled)184
+588 Q F0(Names of enabled shell b)224 588 Q(uiltins.)-.2 E F1(export)184
+600 Q F0(Names of e)224 600 Q(xported shell v)-.15 E 2.5(ariables. May)
+-.25 F(also be speci\214ed as)2.5 E F1<ad65>2.5 E F0(.)A F1(\214le)184
+612 Q F0(File names.)224 612 Q(May also be speci\214ed as)5 E F1<ad66>
+2.5 E F0(.)A F1(function)184 624 Q F0(Names of shell functions.)224 636
+Q F1(gr)184 648 Q(oup)-.18 E F0(Group names.)224 648 Q
+(May also be speci\214ed as)5 E F1<ad67>2.5 E F0(.)A F1(helptopic)184
+660 Q F0(Help topics as accepted by the)224 672 Q F1(help)2.5 E F0 -.2
+(bu)2.5 G(iltin.).2 E F1(hostname)184 684 Q F0(Hostnames, as tak)224 696
+Q(en from the \214le speci\214ed by the)-.1 E/F3 9/Times-Bold@0 SF
+(HOSTFILE)2.5 E F0(shell v)2.25 E(ariable.)-.25 E F1(job)184 708 Q F0
+(Job names, if job control is acti)224 708 Q -.15(ve)-.25 G 5(.M).15 G
+(ay also be speci\214ed as)-5 E F1<ad6a>2.5 E F0(.)A(GNU Bash 5.0)72 768
+Q(2004 Apr 20)149.565 E(4)203.725 E 0 Cg EP
+%%Page: 5 5
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S(SH_B).35 E(UIL)-.1 E 87.61
+(TINS\(1\) General)-.92 F(Commands Manual)2.5 E -.35(BA)90.11 G(SH_B).35
+E(UIL)-.1 E(TINS\(1\))-.92 E/F1 10/Times-Bold@0 SF -.1(ke)184 84 S(yw).1
+E(ord)-.1 E F0(Shell reserv)224 96 Q(ed w)-.15 E 2.5(ords. May)-.1 F
+(also be speci\214ed as)2.5 E F1<ad6b>2.5 E F0(.)A F1(running)184 108 Q
+F0(Names of running jobs, if job control is acti)224 108 Q -.15(ve)-.25
+G(.).15 E F1(ser)184 120 Q(vice)-.1 E F0(Service names.)224 120 Q
+(May also be speci\214ed as)5 E F1<ad73>2.5 E F0(.)A F1(setopt)184 132 Q
+F0 -1.11(Va)224 132 S(lid ar)1.11 E(guments for the)-.18 E F1<ad6f>2.5 E
+F0(option to the)2.5 E F1(set)2.5 E F0 -.2(bu)2.5 G(iltin.).2 E F1
+(shopt)184 144 Q F0(Shell option names as accepted by the)224 144 Q F1
+(shopt)2.5 E F0 -.2(bu)2.5 G(iltin.).2 E F1(signal)184 156 Q F0
+(Signal names.)224 156 Q F1(stopped)184 168 Q F0
+(Names of stopped jobs, if job control is acti)224 168 Q -.15(ve)-.25 G
+(.).15 E F1(user)184 180 Q F0(User names.)224 180 Q
+(May also be speci\214ed as)5 E F1<ad75>2.5 E F0(.)A F1 -.1(va)184 192 S
+(riable).1 E F0(Names of all shell v)224 192 Q 2.5(ariables. May)-.25 F
+(also be speci\214ed as)2.5 E F1<ad76>2.5 E F0(.)A F1<ad43>144 204 Q/F2
+10/Times-Italic@0 SF(command)2.5 E(command)184 216 Q F0 1.056(is e)3.556
+F -.15(xe)-.15 G 1.056(cuted in a subshell en).15 F 1.056
+(vironment, and its output is used as the possible)-.4 F(completions.)
+184 228 Q F1<ad46>144 240 Q F2(function)2.5 E F0 .113
+(The shell function)184 252 R F2(function)2.614 E F0 .114(is e)2.614 F
+-.15(xe)-.15 G .114(cuted in the current shell en).15 F 2.614
+(vironment. When)-.4 F .114(the func-)2.614 F .817(tion is e)184 264 R
+-.15(xe)-.15 G .817(cuted, the \214rst ar).15 F .817(gument \()-.18 F F1
+($1)A F0 3.316(\)i)C 3.316(st)-3.316 G .816
+(he name of the command whose ar)-3.316 F(guments)-.18 E 1.407
+(are being completed, the second ar)184 276 R 1.407(gument \()-.18 F F1
+($2)A F0 3.907(\)i)C 3.907(st)-3.907 G 1.407(he w)-3.907 F 1.407
+(ord being completed, and the)-.1 F .104(third ar)184 288 R .104
+(gument \()-.18 F F1($3)A F0 2.604(\)i)C 2.604(st)-2.604 G .104(he w)
+-2.604 F .104(ord preceding the w)-.1 F .103
+(ord being completed on the current com-)-.1 F .101(mand line.)184 300 R
+.101(When it \214nishes, the possible completions are retrie)5.101 F
+-.15(ve)-.25 G 2.602(df).15 G .102(rom the v)-2.602 F .102(alue of the)
+-.25 F/F3 9/Times-Bold@0 SF(COMPREPL)184 312 Q(Y)-.828 E F0(array v)2.25
+E(ariable.)-.25 E F1<ad47>144 324 Q F2(globpat)2.5 E F0 1.008
+(The pathname e)184 336 R 1.008(xpansion pattern)-.15 F F2(globpat)3.507
+E F0 1.007(is e)3.507 F 1.007(xpanded to generate the possible comple-)
+-.15 F(tions.)184 348 Q F1<ad50>144 360 Q F2(pr)2.5 E(e\214x)-.37 E(pr)
+184 372 Q(e\214x)-.37 E F0 .534(is added at the be)3.034 F .534
+(ginning of each possible completion after all other options ha)-.15 F
+-.15(ve)-.2 G(been applied.)184 384 Q F1<ad53>144 396 Q F2(suf)2.5 E
+<8c78>-.18 E(suf)184 396 Q<8c78>-.18 E F0
+(is appended to each possible completion after all other options ha)2.5
+E .3 -.15(ve b)-.2 H(een applied.).15 E F1<ad57>144 408 Q F2(wor)2.5 E
+(dlist)-.37 E F0(The)184 420 Q F2(wor)3.64 E(dlist)-.37 E F0 1.14
+(is split using the characters in the)3.64 F F3(IFS)3.64 E F0 1.139
+(special v)3.39 F 1.139(ariable as delimiters, and)-.25 F .98
+(each resultant w)184 432 R .98(ord is e)-.1 F 3.481(xpanded. Shell)-.15
+F .981(quoting is honored within)3.481 F F2(wor)3.481 E(dlist)-.37 E F0
+3.481(,i)C 3.481(no)-3.481 G .981(rder to)-3.481 F(pro)184 444 Q .766
+(vide a mechanism for the w)-.15 F .765
+(ords to contain shell metacharacters or characters in the)-.1 F -.25
+(va)184 456 S 1.964(lue of).25 F F3(IFS)4.464 E/F4 9/Times-Roman@0 SF(.)
+A F0 1.964
+(The possible completions are the members of the resultant list which)
+6.464 F(match the w)184 468 Q(ord being completed.)-.1 E F1<ad58>144 480
+Q F2(\214lterpat)2.5 E(\214lterpat)184 492 Q F0 .456
+(is a pattern as used for pathname e)2.956 F 2.956(xpansion. It)-.15 F
+.455(is applied to the list of possible)2.956 F 1.596
+(completions generated by the preceding options and ar)184 504 R 1.596
+(guments, and each completion)-.18 F(matching)184 516 Q F2(\214lterpat)
+3.205 E F0 .705(is remo)3.205 F -.15(ve)-.15 G 3.205(df).15 G .704
+(rom the list.)-3.205 F 3.204(Al)5.704 G(eading)-3.204 E F1(!)3.204 E F0
+(in)3.204 E F2(\214lterpat)3.204 E F0(ne)3.204 E -.05(ga)-.15 G .704
+(tes the pattern;).05 F(in this case, an)184 528 Q 2.5(yc)-.15 G
+(ompletion not matching)-2.5 E F2(\214lterpat)2.5 E F0(is remo)2.5 E
+-.15(ve)-.15 G(d.).15 E .466(The return v)144 544.8 R .466
+(alue is true unless an in)-.25 F -.25(va)-.4 G .466
+(lid option is supplied, an option other than).25 F F1<ad70>2.967 E F0
+(or)2.967 E F1<ad72>2.967 E F0 .467(is sup-)2.967 F 1.362
+(plied without a)144 556.8 R F2(name)3.862 E F0(ar)3.862 E 1.361
+(gument, an attempt is made to remo)-.18 F 1.661 -.15(ve a c)-.15 H
+1.361(ompletion speci\214cation for a).15 F F2(name)144 568.8 Q F0
+(for which no speci\214cation e)2.5 E
+(xists, or an error occurs adding a completion speci\214cation.)-.15 E
+F1(compopt)108 585.6 Q F0([)2.5 E F1<ad6f>A F2(option)2.5 E F0 2.5(][)C
+F1(\255DEI)-2.5 E F0 2.5(][)C F1(+o)-2.5 E F2(option)2.5 E F0 2.5(][)C
+F2(name)-2.5 E F0(])A .447(Modify completion options for each)144 597.6
+R F2(name)2.947 E F0 .447(according to the)2.947 F F2(option)2.947 E F0
+.447(s, or for the currently-e)B -.15(xe)-.15 G(cuting).15 E .726
+(completion if no)144 609.6 R F2(name)3.226 E F0 3.226(sa)C .726
+(re supplied.)-3.226 F .725(If no)5.725 F F2(option)3.225 E F0 3.225(sa)
+C .725(re gi)-3.225 F -.15(ve)-.25 G .725
+(n, display the completion options for).15 F(each)144 621.6 Q F2(name)
+3.223 E F0 .723(or the current completion.)3.223 F .724(The possible v)
+5.724 F .724(alues of)-.25 F F2(option)3.224 E F0 .724(are those v)3.224
+F .724(alid for the)-.25 F F1(com-)3.224 E(plete)144 633.6 Q F0 -.2(bu)
+2.678 G .178(iltin described abo).2 F -.15(ve)-.15 G 5.178(.T).15 G(he)
+-5.178 E F1<ad44>2.678 E F0 .178
+(option indicates that other supplied options should apply to)2.678 F
+1.227(the `)144 645.6 R(`def)-.74 E(ault')-.1 E 3.727('c)-.74 G 1.228(o\
+mmand completion; that is, completion attempted on a command for which \
+no)-3.727 F 2.039(completion has pre)144 657.6 R 2.039
+(viously been de\214ned.)-.25 F(The)7.038 E F1<ad45>4.538 E F0 2.038
+(option indicates that other supplied options)4.538 F 1.538
+(should apply to `)144 669.6 R(`empty')-.74 E 4.038('c)-.74 G 1.539
+(ommand completion; that is, completion attempted on a blank line.)
+-4.038 F(The)144 681.6 Q F1<ad49>3.02 E F0 .52(option indicates that ot\
+her supplied options should apply to completion on the initial non-)3.02
+F .867(assignment w)144 693.6 R .868
+(ord on the line, or after a command delimiter such as)-.1 F F1(;)3.368
+E F0(or)3.368 E F1(|)3.368 E F0 3.368(,w)C .868(hich is usually com-)
+-3.368 F(mand name completion.)144 705.6 Q 1.388(The return v)144 729.6
+R 1.388(alue is true unless an in)-.25 F -.25(va)-.4 G 1.387
+(lid option is supplied, an attempt is made to modify the).25 F
+(GNU Bash 5.0)72 768 Q(2004 Apr 20)149.565 E(5)203.725 E 0 Cg EP
+%%Page: 6 6
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S(SH_B).35 E(UIL)-.1 E 87.61
+(TINS\(1\) General)-.92 F(Commands Manual)2.5 E -.35(BA)90.11 G(SH_B).35
+E(UIL)-.1 E(TINS\(1\))-.92 E(options for a)144 84 Q/F1 10/Times-Italic@0
+SF(name)2.5 E F0(for which no completion speci\214cation e)2.5 E
+(xists, or an output error occurs.)-.15 E/F2 10/Times-Bold@0 SF
+(continue)108 100.8 Q F0([)2.5 E F1(n)A F0(])A .85(Resume the ne)144
+112.8 R .85(xt iteration of the enclosing)-.15 F F2 -.25(fo)3.35 G(r).25
+E F0(,)A F2(while)3.351 E F0(,)A F2(until)3.351 E F0 3.351(,o)C(r)-3.351
+E F2(select)3.351 E F0 3.351(loop. If)3.351 F F1(n)3.711 E F0 .851
+(is speci\214ed, re-)3.591 F .204(sume at the)144 124.8 R F1(n)2.704 E
+F0 .204(th enclosing loop.)B F1(n)5.564 E F0 .204(must be)2.944 F/F3 10
+/Symbol SF<b3>2.704 E F0 2.703(1. If)2.704 F F1(n)3.063 E F0 .203
+(is greater than the number of enclosing loops,)2.943 F 1.183
+(the last enclosing loop \(the `)144 136.8 R(`top-le)-.74 E -.15(ve)-.25
+G(l').15 E 3.683('l)-.74 G 1.183(oop\) is resumed.)-3.683 F 1.184
+(The return v)6.184 F 1.184(alue is 0 unless)-.25 F F1(n)3.684 E F0
+1.184(is not)3.684 F(greater than or equal to 1.)144 148.8 Q F2(declar)
+108 165.6 Q(e)-.18 E F0([)2.5 E F2(\255aAfFgiIlnrtux)A F0 2.5(][)C F2
+<ad70>-2.5 E F0 2.5(][)C F1(name)-2.5 E F0([=)A F1(value)A F0 2.5(].)C
+(..])-2.5 E F2(typeset)108 177.6 Q F0([)2.5 E F2(\255aAfFgiIlnrtux)A F0
+2.5(][)C F2<ad70>-2.5 E F0 2.5(][)C F1(name)-2.5 E F0([=)A F1(value)A F0
+2.5(].)C(..])-2.5 E 1.265(Declare v)144 189.6 R 1.265
+(ariables and/or gi)-.25 F 1.565 -.15(ve t)-.25 H 1.265(hem attrib).15 F
+3.765(utes. If)-.2 F(no)3.765 E F1(name)3.765 E F0 3.765(sa)C 1.265
+(re gi)-3.765 F -.15(ve)-.25 G 3.764(nt).15 G 1.264(hen display the v)
+-3.764 F 1.264(alues of)-.25 F -.25(va)144 201.6 S 3.46(riables. The).25
+F F2<ad70>3.46 E F0 .96(option will display the attrib)3.46 F .96
+(utes and v)-.2 F .96(alues of each)-.25 F F1(name)3.82 E F0 5.96(.W).18
+G(hen)-5.96 E F2<ad70>3.46 E F0 .96(is used)3.46 F(with)144 213.6 Q F1
+(name)2.775 E F0(ar)2.775 E .275
+(guments, additional options, other than)-.18 F F2<ad66>2.775 E F0(and)
+2.775 E F2<ad46>2.775 E F0 2.775(,a)C .274(re ignored.)-2.775 F(When)
+5.274 E F2<ad70>2.774 E F0 .274(is supplied)2.774 F(without)144 225.6 Q
+F1(name)3.789 E F0(ar)3.789 E 1.289(guments, it will display the attrib)
+-.18 F 1.289(utes and v)-.2 F 1.29(alues of all v)-.25 F 1.29
+(ariables ha)-.25 F 1.29(ving the at-)-.2 F(trib)144 237.6 Q .38
+(utes speci\214ed by the additional options.)-.2 F .38
+(If no other options are supplied with)5.38 F F2<ad70>2.88 E F0(,)A F2
+(declar)2.88 E(e)-.18 E F0(will)2.88 E 1.106(display the attrib)144
+249.6 R 1.106(utes and v)-.2 F 1.106(alues of all shell v)-.25 F 3.606
+(ariables. The)-.25 F F2<ad66>3.606 E F0 1.107
+(option will restrict the display to)3.606 F .3(shell functions.)144
+261.6 R(The)5.3 E F2<ad46>2.8 E F0 .299(option inhibits the display of \
+function de\214nitions; only the function name)2.8 F 1.54(and attrib)144
+273.6 R 1.54(utes are printed.)-.2 F 1.54(If the)6.54 F F2(extdeb)4.04 E
+(ug)-.2 E F0 1.54(shell option is enabled using)4.04 F F2(shopt)4.04 E
+F0 4.04(,t)C 1.54(he source \214le)-4.04 F .648
+(name and line number where each)144 285.6 R F1(name)3.148 E F0 .648
+(is de\214ned are displayed as well.)3.148 F(The)5.648 E F2<ad46>3.148 E
+F0 .648(option implies)3.148 F F2<ad66>144 297.6 Q F0 5.836(.T)C(he)
+-5.836 E F2<ad67>3.336 E F0 .836(option forces v)3.336 F .837
+(ariables to be created or modi\214ed at the global scope, e)-.25 F -.15
+(ve)-.25 G 3.337(nw).15 G(hen)-3.337 E F2(de-)3.337 E(clar)144 309.6 Q
+(e)-.18 E F0 .819(is e)3.319 F -.15(xe)-.15 G .819
+(cuted in a shell function.).15 F .818
+(It is ignored in all other cases.)5.818 F(The)5.818 E F2<ad49>3.318 E
+F0 .818(option causes local)3.318 F -.25(va)144 321.6 S .693
+(riables to inherit the attrib).25 F .693(utes \(e)-.2 F .693(xcept the)
+-.15 F F1(namer)3.194 E(ef)-.37 E F0(attrib)3.194 E .694(ute\) and v)-.2
+F .694(alue of an)-.25 F 3.194(ye)-.15 G .694(xisting v)-3.344 F
+(ariable)-.25 E .82(with the same)144 333.6 R F1(name)3.32 E F0 .82
+(at a surrounding scope.)3.32 F .82(If there is no e)5.82 F .82
+(xisting v)-.15 F .82(ariable, the local v)-.25 F .82(ariable is)-.25 F
+.379(initially unset.)144 345.6 R .379(The follo)5.379 F .379
+(wing options can be used to restrict output to v)-.25 F .38
+(ariables with the speci\214ed)-.25 F(attrib)144 357.6 Q(ute or to gi)
+-.2 E .3 -.15(ve v)-.25 H(ariables attrib)-.1 E(utes:)-.2 E F2<ad61>144
+369.6 Q F0(Each)180 369.6 Q F1(name)2.5 E F0(is an inde)2.5 E -.15(xe)
+-.15 G 2.5(da).15 G(rray v)-2.5 E(ariable \(see)-.25 E F2(Arrays)2.5 E
+F0(abo)2.5 E -.15(ve)-.15 G(\).).15 E F2<ad41>144 381.6 Q F0(Each)180
+381.6 Q F1(name)2.5 E F0(is an associati)2.5 E .3 -.15(ve a)-.25 H
+(rray v).15 E(ariable \(see)-.25 E F2(Arrays)2.5 E F0(abo)2.5 E -.15(ve)
+-.15 G(\).).15 E F2<ad66>144 393.6 Q F0(Use function names only)180
+393.6 Q(.)-.65 E F2<ad69>144 405.6 Q F0 .558(The v)180 405.6 R .558
+(ariable is treated as an inte)-.25 F .558(ger; arithmetic e)-.15 F -.25
+(va)-.25 G .558(luation \(see).25 F/F4 9/Times-Bold@0 SF .557
+(ARITHMETIC EV)3.058 F(ALU)-1.215 E(A-)-.54 E(TION)180 417.6 Q F0(abo)
+2.25 E -.15(ve)-.15 G 2.5(\)i).15 G 2.5(sp)-2.5 G(erformed when the v)
+-2.5 E(ariable is assigned a v)-.25 E(alue.)-.25 E F2<ad6c>144 429.6 Q
+F0 .909(When the v)180 429.6 R .909(ariable is assigned a v)-.25 F .909
+(alue, all upper)-.25 F .909(-case characters are con)-.2 F -.15(ve)-.4
+G .91(rted to lo).15 F(wer)-.25 E(-)-.2 E 2.5(case. The)180 441.6 R
+(upper)2.5 E(-case attrib)-.2 E(ute is disabled.)-.2 E F2<ad6e>144 453.6
+Q F0(Gi)180 453.6 Q 1.62 -.15(ve e)-.25 H(ach).15 E F1(name)3.82 E F0
+(the)3.82 E F1(namer)3.819 E(ef)-.37 E F0(attrib)3.819 E 1.319
+(ute, making it a name reference to another v)-.2 F(ariable.)-.25 E .477
+(That other v)180 465.6 R .478(ariable is de\214ned by the v)-.25 F .478
+(alue of)-.25 F F1(name)2.978 E F0 5.478(.A)C .478
+(ll references, assignments, and at-)-5.478 F(trib)180 477.6 Q .782
+(ute modi\214cations to)-.2 F F1(name)3.282 E F0 3.282(,e)C .782
+(xcept those using or changing the)-3.432 F F2<ad6e>3.281 E F0(attrib)
+3.281 E .781(ute itself, are)-.2 F .808(performed on the v)180 489.6 R
+.808(ariable referenced by)-.25 F F1(name)3.308 E F0 1.908 -.55('s v)D
+3.308(alue. The).3 F .809(nameref attrib)3.309 F .809(ute cannot be)-.2
+F(applied to array v)180 501.6 Q(ariables.)-.25 E F2<ad72>144 513.6 Q F0
+(Mak)180 513.6 Q(e)-.1 E F1(name)3.655 E F0 3.655(sr)C(eadonly)-3.655 E
+6.154(.T)-.65 G 1.154(hese names cannot then be assigned v)-6.154 F
+1.154(alues by subsequent as-)-.25 F(signment statements or unset.)180
+525.6 Q F2<ad74>144 537.6 Q F0(Gi)180 537.6 Q .729 -.15(ve e)-.25 H(ach)
+.15 E F1(name)2.929 E F0(the)2.929 E F1(tr)2.929 E(ace)-.15 E F0(attrib)
+2.929 E 2.929(ute. T)-.2 F .429(raced functions inherit the)-.35 F F2
+(DEB)2.929 E(UG)-.1 E F0(and)2.93 E F2(RETURN)2.93 E F0
+(traps from the calling shell.)180 549.6 Q(The trace attrib)5 E
+(ute has no special meaning for v)-.2 E(ariables.)-.25 E F2<ad75>144
+561.6 Q F0 .91(When the v)180 561.6 R .909(ariable is assigned a v)-.25
+F .909(alue, all lo)-.25 F(wer)-.25 E .909(-case characters are con)-.2
+F -.15(ve)-.4 G .909(rted to upper).15 F(-)-.2 E 2.5(case. The)180 573.6
+R(lo)2.5 E(wer)-.25 E(-case attrib)-.2 E(ute is disabled.)-.2 E F2<ad78>
+144 585.6 Q F0(Mark)180 585.6 Q F1(name)2.5 E F0 2.5(sf)C(or e)-2.5 E
+(xport to subsequent commands via the en)-.15 E(vironment.)-.4 E .143
+(Using `+' instead of `\255' turns of)144 602.4 R 2.643(ft)-.25 G .143
+(he attrib)-2.643 F .143(ute instead, with the e)-.2 F .144
+(xceptions that)-.15 F F2(+a)2.644 E F0(and)2.644 E F2(+A)2.644 E F0
+.144(may not)2.644 F .579(be used to destro)144 614.4 R 3.079(ya)-.1 G
+.579(rray v)-3.079 F .579(ariables and)-.25 F F2(+r)3.079 E F0 .579
+(will not remo)3.079 F .879 -.15(ve t)-.15 H .579(he readonly attrib).15
+F 3.079(ute. When)-.2 F .578(used in a)3.078 F(function,)144 626.4 Q F2
+(declar)3.543 E(e)-.18 E F0(and)3.543 E F2(typeset)3.543 E F0(mak)3.543
+E 3.543(ee)-.1 G(ach)-3.543 E F1(name)3.543 E F0 1.043
+(local, as with the)3.543 F F2(local)3.544 E F0 1.044
+(command, unless the)3.544 F F2<ad67>3.544 E F0 1.205
+(option is supplied.)144 638.4 R 1.205(If a v)6.205 F 1.205
+(ariable name is follo)-.25 F 1.205(wed by =)-.25 F F1(value)A F0 3.705
+(,t)C 1.205(he v)-3.705 F 1.205(alue of the v)-.25 F 1.205
+(ariable is set to)-.25 F F1(value)144 650.4 Q F0 5.217(.W)C .217
+(hen using)-5.217 F F2<ad61>2.717 E F0(or)2.717 E F2<ad41>2.717 E F0
+.217(and the compound assignment syntax to create array v)2.717 F .218
+(ariables, addi-)-.25 F .882(tional attrib)144 662.4 R .882
+(utes do not tak)-.2 F 3.382(ee)-.1 G -.25(ff)-3.382 G .882
+(ect until subsequent assignments.).25 F .882(The return v)5.882 F .882
+(alue is 0 unless an)-.25 F(in)144 674.4 Q -.25(va)-.4 G .365(lid optio\
+n is encountered, an attempt is made to de\214ne a function using).25 F
+/F5 10/Courier@0 SF .366(\255f foo=bar)2.866 F F0 2.866(,a)C 2.866(na)
+-2.866 G(t-)-2.866 E .549(tempt is made to assign a v)144 686.4 R .549
+(alue to a readonly v)-.25 F .548
+(ariable, an attempt is made to assign a v)-.25 F .548(alue to an)-.25 F
+1.748(array v)144 698.4 R 1.748
+(ariable without using the compound assignment syntax \(see)-.25 F F2
+(Arrays)4.249 E F0(abo)4.249 E -.15(ve)-.15 G 1.749(\), one of the).15 F
+F1(names)144 710.4 Q F0 .359(is not a v)2.859 F .359(alid shell v)-.25 F
+.359(ariable name, an attempt is made to turn of)-.25 F 2.859(fr)-.25 G
+.359(eadonly status for a read-)-2.859 F 1.212(only v)144 722.4 R 1.213
+(ariable, an attempt is made to turn of)-.25 F 3.713(fa)-.25 G 1.213
+(rray status for an array v)-3.713 F 1.213(ariable, or an attempt is)
+-.25 F(GNU Bash 5.0)72 768 Q(2004 Apr 20)149.565 E(6)203.725 E 0 Cg EP
+%%Page: 7 7
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S(SH_B).35 E(UIL)-.1 E 87.61
+(TINS\(1\) General)-.92 F(Commands Manual)2.5 E -.35(BA)90.11 G(SH_B).35
+E(UIL)-.1 E(TINS\(1\))-.92 E(made to display a non-e)144 84 Q
+(xistent function with)-.15 E/F1 10/Times-Bold@0 SF<ad66>2.5 E F0(.)A F1
+(dirs [\255clpv] [+)108 100.8 Q/F2 10/Times-Italic@0 SF(n)A F1 2.5(][)C
+<ad>-2.5 E F2(n)A F1(])A F0 -.4(Wi)144 112.8 S .329
+(thout options, displays the list of currently remembered directories.)
+.4 F .328(The def)5.328 F .328(ault display is on a)-.1 F 1.238
+(single line with directory names separated by spaces.)144 124.8 R 1.238
+(Directories are added to the list with the)6.238 F F1(pushd)144 136.8 Q
+F0 .928(command; the)3.428 F F1(popd)3.428 E F0 .928(command remo)3.428
+F -.15(ve)-.15 G 3.428(se).15 G .928(ntries from the list.)-3.428 F .928
+(The current directory is al-)5.928 F -.1(wa)144 148.8 S
+(ys the \214rst directory in the stack.).1 E F1<ad63>144 160.8 Q F0
+(Clears the directory stack by deleting all of the entries.)180 160.8 Q
+F1<ad6c>144 172.8 Q F0 .881
+(Produces a listing using full pathnames; the def)180 172.8 R .882
+(ault listing format uses a tilde to denote)-.1 F(the home directory)180
+184.8 Q(.)-.65 E F1<ad70>144 196.8 Q F0
+(Print the directory stack with one entry per line.)180 196.8 Q F1<ad76>
+144 208.8 Q F0 .273(Print the directory stack with one entry per line, \
+pre\214xing each entry with its inde)180 208.8 R 2.772(xi)-.15 G 2.772
+(nt)-2.772 G(he)-2.772 E(stack.)180 220.8 Q F1(+)144 232.8 Q F2(n)A F0
+1.564(Displays the)180 232.8 R F2(n)4.064 E F0 1.565
+(th entry counting from the left of the list sho)B 1.565(wn by)-.25 F F1
+(dirs)4.065 E F0 1.565(when in)4.065 F -.2(vo)-.4 G -.1(ke).2 G(d).1 E
+(without options, starting with zero.)180 244.8 Q F1<ad>144 256.8 Q F2
+(n)A F0 1.194(Displays the)180 256.8 R F2(n)3.694 E F0 1.194
+(th entry counting from the right of the list sho)B 1.194(wn by)-.25 F
+F1(dirs)3.694 E F0 1.194(when in)3.694 F -.2(vo)-.4 G -.1(ke).2 G(d).1 E
+(without options, starting with zero.)180 268.8 Q .257(The return v)144
+285.6 R .258(alue is 0 unless an in)-.25 F -.25(va)-.4 G .258
+(lid option is supplied or).25 F F2(n)2.758 E F0(inde)2.758 E -.15(xe)
+-.15 G 2.758(sb).15 G -.15(ey)-2.758 G .258(ond the end of the direc-)
+.15 F(tory stack.)144 297.6 Q F1(diso)108 314.4 Q(wn)-.1 E F0([)2.5 E F1
+(\255ar)A F0 2.5(][)C F1<ad68>-2.5 E F0 2.5(][)C F2(jobspec)-2.5 E F0
+(... |)2.5 E F2(pid)2.5 E F0(... ])2.5 E -.4(Wi)144 326.4 S .122
+(thout options, remo).4 F .422 -.15(ve e)-.15 H(ach).15 E F2(jobspec)
+4.362 E F0 .122(from the table of acti)2.932 F .422 -.15(ve j)-.25 H
+2.622(obs. If).15 F F2(jobspec)4.362 E F0 .121(is not present, and)2.932
+F .096(neither the)144 338.4 R F1<ad61>2.596 E F0 .096(nor the)2.596 F
+F1<ad72>2.596 E F0 .096(option is supplied, the)2.596 F F2(curr)2.596 E
+.096(ent job)-.37 F F0 .096(is used.)2.596 F .096(If the)5.096 F F1
+<ad68>2.596 E F0 .096(option is gi)2.596 F -.15(ve)-.25 G .096(n, each)
+.15 F F2(jobspec)145.74 350.4 Q F0 .586(is not remo)3.396 F -.15(ve)-.15
+G 3.086(df).15 G .585(rom the table, b)-3.086 F .585(ut is mark)-.2 F
+.585(ed so that)-.1 F/F3 9/Times-Bold@0 SF(SIGHUP)3.085 E F0 .585
+(is not sent to the job if the)2.835 F .962(shell recei)144 362.4 R -.15
+(ve)-.25 G 3.462(sa).15 G F3(SIGHUP)A/F4 9/Times-Roman@0 SF(.)A F0 .962
+(If no)5.462 F F2(jobspec)5.202 E F0 .962(is supplied, the)3.772 F F1
+<ad61>3.462 E F0 .962(option means to remo)3.462 F 1.262 -.15(ve o)-.15
+H 3.462(rm).15 G .962(ark all)-3.462 F 1.359(jobs; the)144 374.4 R F1
+<ad72>3.859 E F0 1.359(option without a)3.859 F F2(jobspec)5.599 E F0
+(ar)4.169 E 1.358(gument restricts operation to running jobs.)-.18 F
+1.358(The return)6.358 F -.25(va)144 386.4 S(lue is 0 unless a).25 E F2
+(jobspec)4.24 E F0(does not specify a v)2.81 E(alid job)-.25 E(.)-.4 E
+F1(echo)108 403.2 Q F0([)2.5 E F1(\255neE)A F0 2.5(][)C F2(ar)-2.5 E(g)
+-.37 E F0(...])2.5 E .424(Output the)144 415.2 R F2(ar)2.924 E(g)-.37 E
+F0 .424(s, separated by spaces, follo)B .424(wed by a ne)-.25 F 2.924
+(wline. The)-.25 F .424(return status is 0 unless a write)2.924 F .308
+(error occurs.)144 427.2 R(If)5.308 E F1<ad6e>2.808 E F0 .308
+(is speci\214ed, the trailing ne)2.808 F .308(wline is suppressed.)-.25
+F .307(If the)5.308 F F1<ad65>2.807 E F0 .307(option is gi)2.807 F -.15
+(ve)-.25 G .307(n, inter).15 F(-)-.2 E .197(pretation of the follo)144
+439.2 R .198(wing backslash-escaped characters is enabled.)-.25 F(The)
+5.198 E F1<ad45>2.698 E F0 .198(option disables the in-)2.698 F .067
+(terpretation of these escape characters, e)144 451.2 R -.15(ve)-.25 G
+2.567(no).15 G 2.567(ns)-2.567 G .067(ystems where the)-2.567 F 2.567
+(ya)-.15 G .067(re interpreted by def)-2.567 F 2.567(ault. The)-.1 F F1
+(xpg_echo)144 463.2 Q F0 .601
+(shell option may be used to dynamically determine whether or not)3.101
+F F1(echo)3.102 E F0 -.15(ex)3.102 G .602(pands these).15 F .659
+(escape characters by def)144 475.2 R(ault.)-.1 E F1(echo)5.659 E F0
+.659(does not interpret)3.159 F F1<adad>3.159 E F0 .659
+(to mean the end of options.)3.159 F F1(echo)5.658 E F0(inter)3.158 E(-)
+-.2 E(prets the follo)144 487.2 Q(wing escape sequences:)-.25 E F1(\\a)
+144 499.2 Q F0(alert \(bell\))180 499.2 Q F1(\\b)144 511.2 Q F0
+(backspace)180 511.2 Q F1(\\c)144 523.2 Q F0(suppress further output)180
+523.2 Q F1(\\e)144 535.2 Q(\\E)144 547.2 Q F0(an escape character)180
+547.2 Q F1(\\f)144 559.2 Q F0(form feed)180 559.2 Q F1(\\n)144 571.2 Q
+F0(ne)180 571.2 Q 2.5(wl)-.25 G(ine)-2.5 E F1(\\r)144 583.2 Q F0
+(carriage return)180 583.2 Q F1(\\t)144 595.2 Q F0(horizontal tab)180
+595.2 Q F1(\\v)144 607.2 Q F0 -.15(ve)180 607.2 S(rtical tab).15 E F1
+(\\\\)144 619.2 Q F0(backslash)180 619.2 Q F1(\\0)144 631.2 Q F2(nnn)A
+F0(the eight-bit character whose v)180 631.2 Q(alue is the octal v)-.25
+E(alue)-.25 E F2(nnn)2.5 E F0(\(zero to three octal digits\))2.5 E F1
+(\\x)144 643.2 Q F2(HH)A F0(the eight-bit character whose v)180 643.2 Q
+(alue is the he)-.25 E(xadecimal v)-.15 E(alue)-.25 E F2(HH)2.5 E F0
+(\(one or tw)2.5 E 2.5(oh)-.1 G .3 -.15(ex d)-2.5 H(igits\)).15 E F1
+(\\u)144 655.2 Q F2(HHHH)A F0 1.506
+(the Unicode \(ISO/IEC 10646\) character whose v)180 667.2 R 1.507
+(alue is the he)-.25 F 1.507(xadecimal v)-.15 F(alue)-.25 E F2(HHHH)
+4.007 E F0(\(one to four he)180 679.2 Q 2.5(xd)-.15 G(igits\))-2.5 E F1
+(\\U)144 691.2 Q F2(HHHHHHHH)A F0 .548
+(the Unicode \(ISO/IEC 10646\) character whose v)180 703.2 R .547
+(alue is the he)-.25 F .547(xadecimal v)-.15 F(alue)-.25 E F2(HHHHH-)
+3.047 E(HHH)180 715.2 Q F0(\(one to eight he)2.5 E 2.5(xd)-.15 G
+(igits\))-2.5 E(GNU Bash 5.0)72 768 Q(2004 Apr 20)149.565 E(7)203.725 E
+0 Cg EP
+%%Page: 8 8
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S(SH_B).35 E(UIL)-.1 E 87.61
+(TINS\(1\) General)-.92 F(Commands Manual)2.5 E -.35(BA)90.11 G(SH_B).35
+E(UIL)-.1 E(TINS\(1\))-.92 E/F1 10/Times-Bold@0 SF(enable)108 84 Q F0([)
+2.5 E F1<ad61>A F0 2.5(][)C F1(\255dnps)-2.5 E F0 2.5(][)C F1<ad66>-2.5
+E/F2 10/Times-Italic@0 SF(\214lename)2.5 E F0 2.5(][)C F2(name)-2.5 E F0
+(...])2.5 E .277(Enable and disable b)144 96 R .278
+(uiltin shell commands.)-.2 F .278(Disabling a b)5.278 F .278
+(uiltin allo)-.2 F .278(ws a disk command which has)-.25 F .834
+(the same name as a shell b)144 108 R .834(uiltin to be e)-.2 F -.15(xe)
+-.15 G .834(cuted without specifying a full pathname, e).15 F -.15(ve)
+-.25 G 3.333(nt).15 G(hough)-3.333 E .989
+(the shell normally searches for b)144 120 R .989
+(uiltins before disk commands.)-.2 F(If)5.989 E F1<ad6e>3.489 E F0 .99
+(is used, each)3.49 F F2(name)3.49 E F0 .99(is dis-)3.49 F .649
+(abled; otherwise,)144 132 R F2(names)3.148 E F0 .648(are enabled.)3.148
+F -.15(Fo)5.648 G 3.148(re).15 G .648(xample, to use the)-3.298 F F1
+(test)3.148 E F0 .648(binary found via the)3.148 F/F3 9/Times-Bold@0 SF
+-.666(PA)3.148 G(TH)-.189 E F0(in-)2.898 E .538(stead of the shell b)144
+144 R .538(uiltin v)-.2 F .538(ersion, run)-.15 F/F4 10/Courier@0 SF
+.538(enable -n test)3.038 F F0 5.538(.T)C(he)-5.538 E F1<ad66>3.038 E F0
+.539(option means to load the ne)3.038 F(w)-.25 E -.2(bu)144 156 S 1.365
+(iltin command).2 F F2(name)4.225 E F0 1.365(from shared object)4.045 F
+F2(\214lename)5.775 E F0 3.865(,o).18 G 3.865(ns)-3.865 G 1.365
+(ystems that support dynamic loading.)-3.865 F(The)144 168 Q F1<ad64>
+2.866 E F0 .366(option will delete a b)2.866 F .366(uiltin pre)-.2 F
+.366(viously loaded with)-.25 F F1<ad66>2.867 E F0 5.367(.I)C 2.867(fn)
+-5.367 G(o)-2.867 E F2(name)2.867 E F0(ar)2.867 E .367(guments are gi)
+-.18 F -.15(ve)-.25 G .367(n, or).15 F .399(if the)144 180 R F1<ad70>
+2.899 E F0 .399(option is supplied, a list of shell b)2.899 F .399
+(uiltins is printed.)-.2 F -.4(Wi)5.399 G .399(th no other option ar).4
+F .398(guments, the)-.18 F .098(list consists of all enabled shell b)144
+192 R 2.598(uiltins. If)-.2 F F1<ad6e>2.598 E F0 .098
+(is supplied, only disabled b)2.598 F .099(uiltins are printed.)-.2 F
+(If)5.099 E F1<ad61>2.599 E F0 .906
+(is supplied, the list printed includes all b)144 204 R .905
+(uiltins, with an indication of whether or not each is en-)-.2 F 2.872
+(abled. If)144 216 R F1<ad73>2.872 E F0 .372
+(is supplied, the output is restricted to the POSIX)2.872 F F2(special)
+2.873 E F0 -.2(bu)2.873 G 2.873(iltins. The).2 F .373(return v)2.873 F
+.373(alue is)-.25 F 2.5(0u)144 228 S(nless a)-2.5 E F2(name)2.86 E F0
+(is not a shell b)2.68 E(uiltin or there is an error loading a ne)-.2 E
+2.5(wb)-.25 G(uiltin from a shared object.)-2.7 E F1 -2.3 -.15(ev a)108
+244.8 T(l).15 E F0([)2.5 E F2(ar)A(g)-.37 E F0(...])2.5 E(The)144 256.8
+Q F2(ar)3.171 E(g)-.37 E F0 3.171(sa)C .671
+(re read and concatenated together into a single command.)-3.171 F .67
+(This command is then read)5.67 F .478(and e)144 268.8 R -.15(xe)-.15 G
+.478(cuted by the shell, and its e).15 F .478
+(xit status is returned as the v)-.15 F .479(alue of)-.25 F F1 -2.3 -.15
+(ev a)2.979 H(l).15 E F0 5.479(.I)C 2.979(ft)-5.479 G .479(here are no)
+-2.979 F F2(ar)3.309 E(gs)-.37 E F0(,).27 E(or only null ar)144 280.8 Q
+(guments,)-.18 E F1 -2.3 -.15(ev a)2.5 H(l).15 E F0(returns 0.)2.5 E F1
+(exec)108 297.6 Q F0([)2.5 E F1(\255cl)A F0 2.5(][)C F1<ad61>-2.5 E F2
+(name)2.5 E F0 2.5(][)C F2(command)-2.5 E F0([)2.5 E F2(ar)A(guments)
+-.37 E F0(]])A(If)144 309.6 Q F2(command)3.006 E F0 .306
+(is speci\214ed, it replaces the shell.)3.576 F .305(No ne)5.305 F 2.805
+(wp)-.25 G .305(rocess is created.)-2.805 F(The)5.305 E F2(ar)3.135 E
+(guments)-.37 E F0(become)3.075 E .176(the ar)144 321.6 R .176
+(guments to)-.18 F F2(command)2.676 E F0 5.176(.I)C 2.676(ft)-5.176 G
+(he)-2.676 E F1<ad6c>2.676 E F0 .176
+(option is supplied, the shell places a dash at the be)2.676 F .177
+(ginning of)-.15 F .48(the zeroth ar)144 333.6 R .48(gument passed to)
+-.18 F F2(command)3.18 E F0 5.48(.T).77 G .48(his is what)-5.48 F F2(lo)
+3.07 E(gin)-.1 E F0 .48(\(1\) does.).24 F(The)5.48 E F1<ad63>2.98 E F0
+.48(option causes)2.98 F F2(com-)3.18 E(mand)144 345.6 Q F0 .638
+(to be e)3.908 F -.15(xe)-.15 G .638(cuted with an empty en).15 F 3.138
+(vironment. If)-.4 F F1<ad61>3.138 E F0 .638
+(is supplied, the shell passes)3.138 F F2(name)3.499 E F0 .639(as the)
+3.319 F 1.078(zeroth ar)144 357.6 R 1.077(gument to the e)-.18 F -.15
+(xe)-.15 G 1.077(cuted command.).15 F(If)6.077 E F2(command)3.777 E F0
+1.077(cannot be e)4.347 F -.15(xe)-.15 G 1.077(cuted for some reason, a)
+.15 F(non-interacti)144 369.6 Q .876 -.15(ve s)-.25 H .576(hell e).15 F
+.576(xits, unless the)-.15 F F1(execfail)3.076 E F0 .577
+(shell option is enabled.)3.077 F .577(In that case, it returns f)5.577
+F(ail-)-.1 E 3.32(ure. An)144 381.6 R(interacti)3.32 E 1.12 -.15(ve s)
+-.25 H .82(hell returns f).15 F .82(ailure if the \214le cannot be e)-.1
+F -.15(xe)-.15 G 3.32(cuted. A).15 F .82(subshell e)3.32 F .82
+(xits uncondi-)-.15 F .287(tionally if)144 393.6 R F1(exec)2.787 E F0
+-.1(fa)2.787 G 2.787(ils. If).1 F F2(command)2.987 E F0 .287
+(is not speci\214ed, an)3.557 F 2.788(yr)-.15 G .288(edirections tak)
+-2.788 F 2.788(ee)-.1 G -.25(ff)-2.788 G .288(ect in the current shell,)
+.25 F(and the return status is 0.)144 405.6 Q
+(If there is a redirection error)5 E 2.5(,t)-.4 G
+(he return status is 1.)-2.5 E F1(exit)108 422.4 Q F0([)2.5 E F2(n)A F0
+(])A .096(Cause the shell to e)144 422.4 R .096(xit with a status of)
+-.15 F F2(n)2.596 E F0 5.096(.I)C(f)-5.096 E F2(n)2.955 E F0 .095
+(is omitted, the e)2.835 F .095(xit status is that of the last command)
+-.15 F -.15(exe)144 434.4 S 2.5(cuted. A).15 F(trap on)2.5 E F3(EXIT)2.5
+E F0(is e)2.25 E -.15(xe)-.15 G(cuted before the shell terminates.).15 E
+F1(export)108 451.2 Q F0([)2.5 E F1(\255fn)A F0 2.5(][).833 G F2(name)
+-2.5 E F0([=)A F2(wor)A(d)-.37 E F0(]] ...)A F1(export \255p)108 463.2 Q
+F0 .256(The supplied)144 475.2 R F2(names)3.117 E F0 .257(are mark)3.027
+F .257(ed for automatic e)-.1 F .257(xport to the en)-.15 F .257
+(vironment of subsequently e)-.4 F -.15(xe)-.15 G(cuted).15 E 2.627
+(commands. If)144 487.2 R(the)2.627 E F1<ad66>2.627 E F0 .127
+(option is gi)2.627 F -.15(ve)-.25 G .127(n, the).15 F F2(names)2.987 E
+F0 .127(refer to functions.)2.897 F .127(If no)5.127 F F2(names)2.987 E
+F0 .127(are gi)2.897 F -.15(ve)-.25 G .126(n, or if the).15 F F1<ad70>
+144 499.2 Q F0 .048(option is supplied, a list of names of all e)2.547 F
+.048(xported v)-.15 F .048(ariables is printed.)-.25 F(The)5.048 E F1
+<ad6e>2.548 E F0 .048(option causes the)2.548 F -.15(ex)144 511.2 S
+1.447(port property to be remo).15 F -.15(ve)-.15 G 3.947(df).15 G 1.447
+(rom each)-3.947 F F2(name)3.947 E F0 6.447(.I)C 3.947(fav)-6.447 G
+1.447(ariable name is follo)-4.197 F 1.447(wed by =)-.25 F F2(wor)A(d)
+-.37 E F0 3.946(,t)C(he)-3.946 E -.25(va)144 523.2 S .741(lue of the v)
+.25 F .741(ariable is set to)-.25 F F2(wor)3.241 E(d)-.37 E F0(.)A F1
+(export)5.741 E F0 .742(returns an e)3.242 F .742
+(xit status of 0 unless an in)-.15 F -.25(va)-.4 G .742(lid option is)
+.25 F .032(encountered, one of the)144 535.2 R F2(names)2.532 E F0 .032
+(is not a v)2.532 F .032(alid shell v)-.25 F .032(ariable name, or)-.25
+F F1<ad66>2.531 E F0 .031(is supplied with a)2.531 F F2(name)2.891 E F0
+(that)2.711 E(is not a function.)144 547.2 Q F1(fc)108 564 Q F0([)2.5 E
+F1<ad65>A F2(ename)2.5 E F0 2.5(][)C F1(\255lnr)-2.5 E F0 2.5(][)C F2
+<8c72>-2.5 E(st)-.1 E F0 2.5(][)C F2(last)-2.5 E F0(])A F1(fc \255s)108
+576 Q F0([)2.5 E F2(pat)A F0(=)A F2 -.37(re)C(p).37 E F0 2.5(][)C F2
+(cmd)-2.5 E F0(])A .431
+(The \214rst form selects a range of commands from)144 588 R F2<8c72>
+4.842 E(st)-.1 E F0(to)3.612 E F2(last)3.022 E F0 .432
+(from the history list and displays or)3.612 F .142(edits and re-e)144
+600 R -.15(xe)-.15 G .142(cutes them.).15 F F2 -.45(Fi)5.141 G -.1(rs)
+.45 G(t).1 E F0(and)3.321 E F2(last)2.731 E F0 .141
+(may be speci\214ed as a string \(to locate the last command)3.321 F(be)
+144 612 Q .31(ginning with that string\) or as a number \(an inde)-.15 F
+2.811(xi)-.15 G .311(nto the history list, where a ne)-2.811 F -.05(ga)
+-.15 G(ti).05 E .611 -.15(ve n)-.25 H(umber).15 E .071(is used as an of)
+144 624 R .071(fset from the current command number\).)-.25 F .071
+(When listing, a)5.071 F F2<8c72>2.571 E(st)-.1 E F0(or)2.571 E F2(last)
+2.571 E F0 .071(of 0 is equi)2.571 F -.25(va)-.25 G(-).25 E .653
+(lent to \2551 and \2550 is equi)144 636 R -.25(va)-.25 G .653
+(lent to the current command \(usually the).25 F F1(fc)3.153 E F0 .653
+(command\); otherwise 0 is)3.153 F(equi)144 648 Q -.25(va)-.25 G .242
+(lent to \2551 and \2550 is in).25 F -.25(va)-.4 G 2.742(lid. If).25 F
+F2(last)2.832 E F0 .242
+(is not speci\214ed, it is set to the current command for list-)3.422 F
+.092(ing \(so that)144 660 R F4 .092(fc \255l \25510)2.592 F F0 .093
+(prints the last 10 commands\) and to)2.592 F F2<8c72>4.503 E(st)-.1 E
+F0 2.593(otherwise. If)3.273 F F2<8c72>4.503 E(st)-.1 E F0 .093
+(is not speci-)3.273 F(\214ed, it is set to the pre)144 672 Q
+(vious command for editing and \25516 for listing.)-.25 E(The)144 696 Q
+F1<ad6e>2.522 E F0 .022
+(option suppresses the command numbers when listing.)2.522 F(The)5.022 E
+F1<ad72>2.522 E F0 .022(option re)2.522 F -.15(ve)-.25 G .022
+(rses the order of).15 F .438(the commands.)144 708 R .438(If the)5.438
+F F1<ad6c>2.938 E F0 .438(option is gi)2.938 F -.15(ve)-.25 G .438
+(n, the commands are listed on standard output.).15 F(Otherwise,)5.438 E
+.335(the editor gi)144 720 R -.15(ve)-.25 G 2.835(nb).15 G(y)-2.835 E F2
+(ename)3.025 E F0 .335(is in)3.015 F -.2(vo)-.4 G -.1(ke).2 G 2.835(do)
+.1 G 2.835(na\214)-2.835 G .335(le containing those commands.)-2.835 F
+(If)5.334 E F2(ename)3.024 E F0 .334(is not gi)3.014 F -.15(ve)-.25 G
+(n,).15 E(GNU Bash 5.0)72 768 Q(2004 Apr 20)149.565 E(8)203.725 E 0 Cg
+EP
+%%Page: 9 9
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S(SH_B).35 E(UIL)-.1 E 87.61
+(TINS\(1\) General)-.92 F(Commands Manual)2.5 E -.35(BA)90.11 G(SH_B).35
+E(UIL)-.1 E(TINS\(1\))-.92 E .63(the v)144 84 R .63(alue of the)-.25 F
+/F1 9/Times-Bold@0 SF(FCEDIT)3.13 E F0 -.25(va)2.88 G .631
+(riable is used, and the v).25 F .631(alue of)-.25 F F1(EDIT)3.131 E(OR)
+-.162 E F0(if)2.881 E F1(FCEDIT)3.131 E F0 .631(is not set.)2.881 F .631
+(If nei-)5.631 F .006(ther v)144 96 R .006(ariable is set,)-.25 F/F2 10
+/Times-Italic@0 SF(vi)4.171 E F0 .005(is used.)4.171 F .005
+(When editing is complete, the edited commands are echoed and e)5.005 F
+(x-)-.15 E(ecuted.)144 108 Q .788(In the second form,)144 132 R F2
+(command)3.288 E F0 .788(is re-e)3.288 F -.15(xe)-.15 G .788
+(cuted after each instance of).15 F F2(pat)3.288 E F0 .788
+(is replaced by)3.288 F F2 -.37(re)3.289 G(p).37 E F0(.)A F2(Com-)5.789
+E(mand)144 144 Q F0 .172(is interpreted the same as)2.672 F F2<8c72>
+2.672 E(st)-.1 E F0(abo)2.672 E -.15(ve)-.15 G 5.172(.A).15 G .171
+(useful alias to use with this is)-2.5 F/F3 10/Courier@0 SF .171
+(r='fc \255s')2.671 F F0 2.671(,s)C 2.671(ot)-2.671 G(hat)-2.671 E
+(typing)144 156 Q F3 7.165(rc)3.665 G(c)-7.165 E F0 1.165
+(runs the last command be)3.665 F 1.166(ginning with)-.15 F F3(cc)3.666
+E F0 1.166(and typing)3.666 F F3(r)3.666 E F0(re-e)3.666 E -.15(xe)-.15
+G 1.166(cutes the last com-).15 F(mand.)144 168 Q .142
+(If the \214rst form is used, the return v)144 192 R .142
+(alue is 0 unless an in)-.25 F -.25(va)-.4 G .142
+(lid option is encountered or).25 F F2<8c72>4.552 E(st)-.1 E F0(or)3.322
+E F2(last)2.732 E F0 .454(specify history lines out of range.)144 204 R
+.454(If the)5.454 F/F4 10/Times-Bold@0 SF<ad65>2.954 E F0 .454
+(option is supplied, the return v)2.954 F .455(alue is the v)-.25 F .455
+(alue of the)-.25 F .788(last command e)144 216 R -.15(xe)-.15 G .788
+(cuted or f).15 F .787
+(ailure if an error occurs with the temporary \214le of commands.)-.1 F
+.787(If the)5.787 F 1.135
+(second form is used, the return status is that of the command re-e)144
+228 R -.15(xe)-.15 G 1.136(cuted, unless).15 F F2(cmd)3.836 E F0 1.136
+(does not)4.406 F(specify a v)144 240 Q
+(alid history line, in which case)-.25 E F4(fc)2.5 E F0(returns f)2.5 E
+(ailure.)-.1 E F4(fg)108 256.8 Q F0([)2.5 E F2(jobspec)A F0(])A(Resume)
+144 268.8 Q F2(jobspec)5.654 E F0 1.413(in the fore)4.224 F 1.413
+(ground, and mak)-.15 F 3.913(ei)-.1 G 3.913(tt)-3.913 G 1.413
+(he current job)-3.913 F 6.413(.I)-.4 G(f)-6.413 E F2(jobspec)5.653 E F0
+1.413(is not present, the)4.223 F(shell')144 280.8 Q 3.116(sn)-.55 G
+.616(otion of the)-3.116 F F2(curr)3.116 E .616(ent job)-.37 F F0 .617
+(is used.)3.116 F .617(The return v)5.617 F .617
+(alue is that of the command placed into the)-.25 F(fore)144 292.8 Q
+.363(ground, or f)-.15 F .363
+(ailure if run when job control is disabled or)-.1 F 2.862(,w)-.4 G .362
+(hen run with job control enabled, if)-2.862 F F2(jobspec)145.74 304.8 Q
+F0(does not specify a v)2.81 E(alid job or)-.25 E F2(jobspec)4.24 E F0
+(speci\214es a job that w)2.81 E(as started without job control.)-.1 E
+F4(getopts)108 321.6 Q F2(optstring name)2.5 E F0([)2.5 E F2(ar)A 2.5
+(g.)-.37 G(..)-2.5 E F0(])A F4(getopts)144 333.6 Q F0 .793
+(is used by shell procedures to parse positional parameters.)3.293 F F2
+(optstring)6.023 E F0 .793(contains the option)3.513 F .15
+(characters to be recognized; if a character is follo)144 345.6 R .149
+(wed by a colon, the option is e)-.25 F .149(xpected to ha)-.15 F .449
+-.15(ve a)-.2 H(n).15 E(ar)144 357.6 Q .578
+(gument, which should be separated from it by white space.)-.18 F .579
+(The colon and question mark char)5.579 F(-)-.2 E .636
+(acters may not be used as option characters.)144 369.6 R .636
+(Each time it is in)5.636 F -.2(vo)-.4 G -.1(ke).2 G(d,).1 E F4(getopts)
+3.136 E F0 .636(places the ne)3.136 F .635(xt op-)-.15 F .029
+(tion in the shell v)144 381.6 R(ariable)-.25 E F2(name)2.889 E F0 2.529
+(,i).18 G(nitializing)-2.529 E F2(name)2.889 E F0 .029(if it does not e)
+2.709 F .03(xist, and the inde)-.15 F 2.53(xo)-.15 G 2.53(ft)-2.53 G .03
+(he ne)-2.53 F .03(xt ar)-.15 F(gu-)-.18 E .066
+(ment to be processed into the v)144 393.6 R(ariable)-.25 E F1(OPTIND)
+2.566 E/F5 9/Times-Roman@0 SF(.)A F1(OPTIND)4.566 E F0 .065
+(is initialized to 1 each time the shell or a)2.315 F .885
+(shell script is in)144 405.6 R -.2(vo)-.4 G -.1(ke).2 G 3.385(d. When)
+.1 F .885(an option requires an ar)3.385 F(gument,)-.18 E F4(getopts)
+3.385 E F0 .885(places that ar)3.385 F .885(gument into)-.18 F .567
+(the v)144 417.6 R(ariable)-.25 E F1(OPT)3.067 E(ARG)-.81 E F5(.)A F0
+.566(The shell does not reset)5.067 F F1(OPTIND)3.066 E F0 .566
+(automatically; it must be manually reset)2.816 F .389
+(between multiple calls to)144 429.6 R F4(getopts)2.889 E F0 .389
+(within the same shell in)2.889 F -.2(vo)-.4 G .39(cation if a ne).2 F
+2.89(ws)-.25 G .39(et of parameters is to)-2.89 F(be used.)144 441.6 Q
+2.044(When the end of options is encountered,)144 465.6 R F4(getopts)
+4.543 E F0 -.15(ex)4.543 G 2.043(its with a return v).15 F 2.043
+(alue greater than zero.)-.25 F F1(OPTIND)144 477.6 Q F0
+(is set to the inde)2.25 E 2.5(xo)-.15 G 2.5(ft)-2.5 G
+(he \214rst non-option ar)-2.5 E(gument, and)-.18 E F2(name)2.5 E F0
+(is set to ?.)2.5 E F4(getopts)144 501.6 Q F0 .485
+(normally parses the positional parameters, b)2.985 F .485
+(ut if more ar)-.2 F .485(guments are supplied as)-.18 F F2(ar)3.315 E
+(g)-.37 E F0 -.25(va)3.205 G(l-).25 E(ues,)144 513.6 Q F4(getopts)2.5 E
+F0(parses those instead.)2.5 E F4(getopts)144 537.6 Q F0 .345
+(can report errors in tw)2.845 F 2.845(ow)-.1 G 2.845(ays. If)-2.945 F
+.345(the \214rst character of)2.845 F F2(optstring)3.075 E F0 .345
+(is a colon,)3.065 F F2(silent)3.185 E F0 .345(error re-)3.525 F 1.668
+(porting is used.)144 549.6 R 1.668
+(In normal operation, diagnostic messages are printed when in)6.668 F
+-.25(va)-.4 G 1.669(lid options or).25 F .394(missing option ar)144
+561.6 R .394(guments are encountered.)-.18 F .394(If the v)5.394 F
+(ariable)-.25 E F1(OPTERR)2.894 E F0 .394
+(is set to 0, no error messages)2.644 F(will be displayed, e)144 573.6 Q
+-.15(ve)-.25 G 2.5(ni).15 G 2.5(ft)-2.5 G(he \214rst character of)-2.5 E
+F2(optstring)2.73 E F0(is not a colon.)2.72 E .666(If an in)144 597.6 R
+-.25(va)-.4 G .666(lid option is seen,).25 F F4(getopts)3.166 E F0 .667
+(places ? into)3.167 F F2(name)3.527 E F0 .667
+(and, if not silent, prints an error message)3.347 F .4(and unsets)144
+609.6 R F1(OPT)2.9 E(ARG)-.81 E F5(.)A F0(If)4.899 E F4(getopts)2.899 E
+F0 .399(is silent, the option character found is placed in)2.899 F F1
+(OPT)2.899 E(ARG)-.81 E F0 .399(and no)2.649 F
+(diagnostic message is printed.)144 621.6 Q 1.241(If a required ar)144
+645.6 R 1.241(gument is not found, and)-.18 F F4(getopts)3.741 E F0
+1.241(is not silent, a question mark \()3.741 F F4(?).833 E F0 3.742
+(\)i).833 G 3.742(sp)-3.742 G 1.242(laced in)-3.742 F F2(name)144.36
+657.6 Q F0(,).18 E F1(OPT)2.714 E(ARG)-.81 E F0 .213
+(is unset, and a diagnostic message is printed.)2.463 F(If)5.213 E F4
+(getopts)2.713 E F0 .213(is silent, then a colon \()2.713 F F4(:).833 E
+F0(\)).833 E(is placed in)144 669.6 Q F2(name)2.86 E F0(and)2.68 E F1
+(OPT)2.5 E(ARG)-.81 E F0(is set to the option character found.)2.25 E F4
+(getopts)144 693.6 Q F0 .902
+(returns true if an option, speci\214ed or unspeci\214ed, is found.)
+3.401 F .902(It returns f)5.902 F .902(alse if the end of)-.1 F
+(options is encountered or an error occurs.)144 705.6 Q(GNU Bash 5.0)72
+768 Q(2004 Apr 20)149.565 E(9)203.725 E 0 Cg EP
+%%Page: 10 10
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S(SH_B).35 E(UIL)-.1 E 87.61
+(TINS\(1\) General)-.92 F(Commands Manual)2.5 E -.35(BA)90.11 G(SH_B).35
+E(UIL)-.1 E(TINS\(1\))-.92 E/F1 10/Times-Bold@0 SF(hash)108 84 Q F0([)
+2.5 E F1(\255lr)A F0 2.5(][)C F1<ad70>-2.5 E/F2 10/Times-Italic@0 SF
+(\214lename)2.5 E F0 2.5(][)C F1(\255dt)-2.5 E F0 2.5(][)C F2(name)-2.5
+E F0(])A .858(Each time)144 96 R F1(hash)3.358 E F0 .858(is in)3.358 F
+-.2(vo)-.4 G -.1(ke).2 G .858(d, the full pathname of the command).1 F
+F2(name)3.718 E F0 .858(is determined by searching)3.538 F .956
+(the directories in)144 108 R F1($P)3.456 E -.95(AT)-.74 G(H).95 E F0
+.956(and remembered.)3.456 F(An)5.956 E 3.456(yp)-.15 G(re)-3.456 E .956
+(viously-remembered pathname is discarded.)-.25 F .243(If the)144 120 R
+F1<ad70>2.743 E F0 .243
+(option is supplied, no path search is performed, and)2.743 F F2
+(\214lename)4.653 E F0 .242(is used as the full \214lename)2.923 F .615
+(of the command.)144 132 R(The)5.615 E F1<ad72>3.115 E F0 .615
+(option causes the shell to for)3.115 F .615
+(get all remembered locations.)-.18 F(The)5.615 E F1<ad64>3.115 E F0
+(op-)3.115 E .294(tion causes the shell to for)144 144 R .294
+(get the remembered location of each)-.18 F F2(name)2.793 E F0 5.293(.I)
+C 2.793(ft)-5.293 G(he)-2.793 E F1<ad74>2.793 E F0 .293
+(option is supplied,)2.793 F .028(the full pathname to which each)144
+156 R F2(name)2.528 E F0 .028(corresponds is printed.)2.528 F .028
+(If multiple)5.028 F F2(name)2.528 E F0(ar)2.528 E .028
+(guments are sup-)-.18 F .176(plied with)144 168 R F1<ad74>2.676 E F0
+2.676(,t)C(he)-2.676 E F2(name)2.676 E F0 .175
+(is printed before the hashed full pathname.)2.676 F(The)5.175 E F1
+<ad6c>2.675 E F0 .175(option causes output to)2.675 F .783
+(be displayed in a format that may be reused as input.)144 180 R .783
+(If no ar)5.783 F .783(guments are gi)-.18 F -.15(ve)-.25 G .783
+(n, or if only).15 F F1<ad6c>3.283 E F0(is)3.283 E .807
+(supplied, information about remembered commands is printed.)144 192 R
+.807(The return status is true unless a)5.807 F F2(name)144.36 204 Q F0
+(is not found or an in)2.68 E -.25(va)-.4 G(lid option is supplied.).25
+E F1(help)108 220.8 Q F0([)2.5 E F1(\255dms)A F0 2.5(][)C F2(pattern)
+-2.5 E F0(])A .866(Display helpful information about b)144 232.8 R .867
+(uiltin commands.)-.2 F(If)5.867 E F2(pattern)4.617 E F0 .867
+(is speci\214ed,)3.607 F F1(help)3.367 E F0(gi)3.367 E -.15(ve)-.25 G
+3.367(sd).15 G(etailed)-3.367 E .224(help on all commands matching)144
+244.8 R F2(pattern)3.974 E F0 2.723(;o).24 G .223
+(therwise help for all the b)-2.723 F .223
+(uiltins and shell control struc-)-.2 F(tures is printed.)144 256.8 Q F1
+<ad64>144 268.8 Q F0(Display a short description of each)180 268.8 Q F2
+(pattern)2.5 E F1<ad6d>144 280.8 Q F0(Display the description of each)
+180 280.8 Q F2(pattern)2.5 E F0(in a manpage-lik)2.5 E 2.5(ef)-.1 G
+(ormat)-2.5 E F1<ad73>144 292.8 Q F0
+(Display only a short usage synopsis for each)180 292.8 Q F2(pattern)2.5
+E F0(The return status is 0 unless no command matches)144 309.6 Q F2
+(pattern)3.75 E F0(.).24 E F1(history [)108 326.4 Q F2(n)A F1(])A
+(history \255c)108 338.4 Q(history \255d)108 350.4 Q F2(of)2.5 E(fset)
+-.18 E F1(history \255d)108 362.4 Q F2(start)2.5 E F0<ad>A F2(end)A F1
+(history \255anrw)108 374.4 Q F0([)2.5 E F2(\214lename)A F0(])A F1
+(history \255p)108 386.4 Q F2(ar)2.5 E(g)-.37 E F0([)2.5 E F2(ar)A 2.5
+(g.)-.37 G(..)-2.5 E F0(])A F1(history \255s)108 398.4 Q F2(ar)2.5 E(g)
+-.37 E F0([)2.5 E F2(ar)A 2.5(g.)-.37 G(..)-2.5 E F0(])A -.4(Wi)144
+410.4 S .752
+(th no options, display the command history list with line numbers.).4 F
+.752(Lines listed with a)5.752 F F1(*)3.252 E F0(ha)3.252 E -.15(ve)-.2
+G .381(been modi\214ed.)144 422.4 R .38(An ar)5.38 F .38(gument of)-.18
+F F2(n)3.24 E F0 .38(lists only the last)3.12 F F2(n)3.24 E F0 2.88
+(lines. If)3.12 F .38(the shell v)2.88 F(ariable)-.25 E/F3 9
+/Times-Bold@0 SF(HISTTIMEFOR-)2.88 E(MA)144 434.4 Q(T)-.855 E F0 .264
+(is set and not null, it is used as a format string for)2.514 F F2
+(strftime)2.765 E F0 .265(\(3\) to display the time stamp asso-)B 1.02
+(ciated with each displayed history entry)144 446.4 R 6.019(.N)-.65 G
+3.519(oi)-6.019 G(nterv)-3.519 E 1.019
+(ening blank is printed between the formatted)-.15 F .176
+(time stamp and the history line.)144 458.4 R(If)5.176 E F2(\214lename)
+2.676 E F0 .176
+(is supplied, it is used as the name of the history \214le; if)2.676 F
+(not, the v)144 470.4 Q(alue of)-.25 E F3(HISTFILE)2.5 E F0(is used.)
+2.25 E(Options, if supplied, ha)5 E .3 -.15(ve t)-.2 H(he follo).15 E
+(wing meanings:)-.25 E F1<ad63>144 482.4 Q F0
+(Clear the history list by deleting all the entries.)180 482.4 Q F1
+<ad64>144 494.4 Q F2(of)2.5 E(fset)-.18 E F0 .39
+(Delete the history entry at position)180 506.4 R F2(of)2.889 E(fset)
+-.18 E F0 5.389(.I)C(f)-5.389 E F2(of)2.889 E(fset)-.18 E F0 .389(is ne)
+2.889 F -.05(ga)-.15 G(ti).05 E -.15(ve)-.25 G 2.889(,i).15 G 2.889(ti)
+-2.889 G 2.889(si)-2.889 G .389(nterpreted as relati)-2.889 F -.15(ve)
+-.25 G .598(to one greater than the last history position, so ne)180
+518.4 R -.05(ga)-.15 G(ti).05 E .899 -.15(ve i)-.25 H .599
+(ndices count back from the end).15 F(of the history)180 530.4 Q 2.5(,a)
+-.65 G(nd an inde)-2.5 E 2.5(xo)-.15 G 2.5<66ad>-2.5 G 2.5(1r)-2.5 G
+(efers to the current)-2.5 E F1(history -d)2.5 E F0(command.)2.5 E F1
+<ad64>144 542.4 Q F2(start)2.5 E F0<ad>A F2(end)A F0 .758
+(Delete the history entries between positions)180 554.4 R F2(start)3.258
+E F0(and)3.257 E F2(end)3.257 E F0 3.257(,i)C(nclusi)-3.257 E -.15(ve)
+-.25 G 5.757(.P).15 G(ositi)-5.757 E 1.057 -.15(ve a)-.25 H .757(nd ne)
+.15 F -.05(ga)-.15 G(-).05 E(ti)180 566.4 Q .3 -.15(ve v)-.25 H
+(alues for)-.1 E F2(start)2.5 E F0(and)2.5 E F2(end)2.5 E F0
+(are interpreted as described abo)2.5 E -.15(ve)-.15 G(.).15 E F1<ad61>
+144 578.4 Q F0 .564(Append the `)180 578.4 R(`ne)-.74 E(w')-.25 E 3.064
+('h)-.74 G .564(istory lines to the history \214le.)-3.064 F .565
+(These are history lines entered since)5.564 F(the be)180 590.4 Q
+(ginning of the current)-.15 E F1(bash)2.5 E F0(session, b)2.5 E
+(ut not already appended to the history \214le.)-.2 E F1<ad6e>144 602.4
+Q F0 .854(Read the history lines not already read from the history \214\
+le into the current history list.)180 602.4 R .772
+(These are lines appended to the history \214le since the be)180 614.4 R
+.773(ginning of the current)-.15 F F1(bash)3.273 E F0(ses-)3.273 E
+(sion.)180 626.4 Q F1<ad72>144 638.4 Q F0(Read the contents of the hist\
+ory \214le and append them to the current history list.)180 638.4 Q F1
+<ad77>144 650.4 Q F0
+(Write the current history list to the history \214le, o)180 650.4 Q
+-.15(ve)-.15 G(rwriting the history \214le').15 E 2.5(sc)-.55 G
+(ontents.)-2.5 E F1<ad70>144 662.4 Q F0 .626
+(Perform history substitution on the follo)180 662.4 R(wing)-.25 E F2
+(ar)3.125 E(gs)-.37 E F0 .625(and display the result on the standard)
+3.125 F 2.975(output. Does)180 674.4 R .475
+(not store the results in the history list.)2.975 F(Each)5.475 E F2(ar)
+2.975 E(g)-.37 E F0 .475(must be quoted to disable)2.975 F
+(normal history e)180 686.4 Q(xpansion.)-.15 E F1<ad73>144 698.4 Q F0
+.363(Store the)180 698.4 R F2(ar)3.193 E(gs)-.37 E F0 .363
+(in the history list as a single entry)3.133 F 5.363(.T)-.65 G .362
+(he last command in the history list is)-5.363 F(remo)180 710.4 Q -.15
+(ve)-.15 G 2.5(db).15 G(efore the)-2.5 E F2(ar)2.83 E(gs)-.37 E F0
+(are added.)2.77 E .145(If the)144 727.2 R F3(HISTTIMEFORMA)2.645 E(T)
+-.855 E F0 -.25(va)2.395 G .145
+(riable is set, the time stamp information associated with each history)
+.25 F(GNU Bash 5.0)72 768 Q(2004 Apr 20)149.565 E(10)198.725 E 0 Cg EP
+%%Page: 11 11
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S(SH_B).35 E(UIL)-.1 E 87.61
+(TINS\(1\) General)-.92 F(Commands Manual)2.5 E -.35(BA)90.11 G(SH_B).35
+E(UIL)-.1 E(TINS\(1\))-.92 E .669
+(entry is written to the history \214le, mark)144 84 R .669
+(ed with the history comment character)-.1 F 5.668(.W)-.55 G .668
+(hen the history)-5.668 F .955(\214le is read, lines be)144 96 R .956
+(ginning with the history comment character follo)-.15 F .956
+(wed immediately by a digit)-.25 F .833
+(are interpreted as timestamps for the follo)144 108 R .833
+(wing history entry)-.25 F 5.832(.T)-.65 G .832(he return v)-5.832 F
+.832(alue is 0 unless an in-)-.25 F -.25(va)144 120 S .168(lid option i\
+s encountered, an error occurs while reading or writing the history \
+\214le, an in).25 F -.25(va)-.4 G(lid).25 E/F1 10/Times-Italic@0 SF(of)
+2.669 E(f-)-.18 E(set)144 132 Q F0(is supplied as an ar)2.5 E(gument to)
+-.18 E/F2 10/Times-Bold@0 SF<ad64>2.5 E F0 2.5(,o)C 2.5(rt)-2.5 G
+(he history e)-2.5 E(xpansion supplied as an ar)-.15 E(gument to)-.18 E
+F2<ad70>2.5 E F0 -.1(fa)2.5 G(ils.).1 E F2(jobs)108 148.8 Q F0([)2.5 E
+F2(\255lnprs)A F0 2.5(][)C F1(jobspec)A F0(... ])2.5 E F2(jobs \255x)108
+160.8 Q F1(command)2.5 E F0([)2.5 E F1(ar)2.5 E(gs)-.37 E F0(... ])2.5 E
+(The \214rst form lists the acti)144 172.8 Q .3 -.15(ve j)-.25 H 2.5
+(obs. The).15 F(options ha)2.5 E .3 -.15(ve t)-.2 H(he follo).15 E
+(wing meanings:)-.25 E F2<ad6c>144 184.8 Q F0
+(List process IDs in addition to the normal information.)180 184.8 Q F2
+<ad6e>144 196.8 Q F0 .194(Display information only about jobs that ha)
+180 196.8 R .494 -.15(ve c)-.2 H .193(hanged status since the user w).15
+F .193(as last noti-)-.1 F(\214ed of their status.)180 208.8 Q F2<ad70>
+144 220.8 Q F0(List only the process ID of the job')180 220.8 Q 2.5(sp)
+-.55 G(rocess group leader)-2.5 E(.)-.55 E F2<ad72>144 232.8 Q F0
+(Display only running jobs.)180 232.8 Q F2<ad73>144 244.8 Q F0
+(Display only stopped jobs.)180 244.8 Q(If)144 261.6 Q F1(jobspec)4.553
+E F0 .313(is gi)3.123 F -.15(ve)-.25 G .313
+(n, output is restricted to information about that job).15 F 5.314(.T)
+-.4 G .314(he return status is 0 unless)-5.314 F(an in)144 273.6 Q -.25
+(va)-.4 G(lid option is encountered or an in).25 E -.25(va)-.4 G(lid).25
+E F1(jobspec)4.24 E F0(is supplied.)2.81 E .395(If the)144 290.4 R F2
+<ad78>2.895 E F0 .394(option is supplied,)2.894 F F2(jobs)2.894 E F0
+.394(replaces an)2.894 F(y)-.15 E F1(jobspec)4.634 E F0 .394(found in)
+3.204 F F1(command)3.094 E F0(or)3.664 E F1(ar)3.224 E(gs)-.37 E F0 .394
+(with the corre-)3.164 F(sponding process group ID, and e)144 302.4 Q
+-.15(xe)-.15 G(cutes).15 E F1(command)2.7 E F0(passing it)3.27 E F1(ar)
+2.83 E(gs)-.37 E F0 2.5(,r).27 G(eturning its e)-2.5 E(xit status.)-.15
+E F2(kill)108 319.2 Q F0([)2.5 E F2<ad73>A F1(sigspec)2.5 E F0(|)2.5 E
+F2<ad6e>2.5 E F1(signum)2.5 E F0(|)2.5 E F2<ad>2.5 E F1(sigspec)A F0 2.5
+(][)C F1(pid)-2.5 E F0(|)2.5 E F1(jobspec)2.5 E F0 2.5(].)C(..)-2.5 E F2
+(kill \255l)108 331.2 Q F0(|)A F2<ad4c>A F0([)2.5 E F1(sigspec)A F0(|)
+2.5 E F1 -.2(ex)2.5 G(it_status).2 E F0(])A .017
+(Send the signal named by)144 343.2 R F1(sigspec)2.857 E F0(or)2.827 E
+F1(signum)2.857 E F0 .017(to the processes named by)2.837 F F1(pid)3.767
+E F0(or)3.287 E F1(jobspec)4.257 E F0(.).31 E F1(sigspec)5.357 E F0(is)
+2.828 E .319(either a case-insensiti)144 355.2 R .619 -.15(ve s)-.25 H
+.319(ignal name such as).15 F/F3 9/Times-Bold@0 SF(SIGKILL)2.819 E F0
+.318(\(with or without the)2.569 F F3(SIG)2.818 E F0 .318
+(pre\214x\) or a signal)2.568 F(number;)144 367.2 Q F1(signum)3.267 E F0
+.427(is a signal number)3.247 F 5.427(.I)-.55 G(f)-5.427 E F1(sigspec)
+3.267 E F0 .427(is not present, then)3.237 F F3(SIGTERM)2.927 E F0 .427
+(is assumed.)2.677 F .428(An ar)5.427 F(-)-.2 E .314(gument of)144 379.2
+R F2<ad6c>2.814 E F0 .314(lists the signal names.)2.814 F .314(If an)
+5.314 F 2.814(ya)-.15 G -.18(rg)-2.814 G .314(uments are supplied when)
+.18 F F2<ad6c>2.814 E F0 .314(is gi)2.814 F -.15(ve)-.25 G .313
+(n, the names of).15 F .119(the signals corresponding to the ar)144
+391.2 R .119(guments are listed, and the return status is 0.)-.18 F(The)
+5.12 E F1 -.2(ex)2.62 G(it_status).2 E F0(ar)2.62 E(-)-.2 E .8
+(gument to)144 403.2 R F2<ad6c>3.3 E F0 .8
+(is a number specifying either a signal number or the e)3.3 F .799
+(xit status of a process termi-)-.15 F .962(nated by a signal.)144 415.2
+R(The)5.962 E F2<ad4c>3.462 E F0 .962(option is equi)3.462 F -.25(va)
+-.25 G .962(lent to).25 F F2<ad6c>3.462 E F0(.)A F2(kill)5.962 E F0 .962
+(returns true if at least one signal w)3.462 F(as)-.1 E
+(successfully sent, or f)144 427.2 Q(alse if an error occurs or an in)
+-.1 E -.25(va)-.4 G(lid option is encountered.).25 E F2(let)108 444 Q F1
+(ar)2.5 E(g)-.37 E F0([)2.5 E F1(ar)A(g)-.37 E F0(...])2.5 E(Each)144
+456 Q F1(ar)3.027 E(g)-.37 E F0 .197(is an arithmetic e)2.917 F .197
+(xpression to be e)-.15 F -.25(va)-.25 G .196(luated \(see).25 F F3 .196
+(ARITHMETIC EV)2.696 F(ALU)-1.215 E -.855(AT)-.54 G(ION).855 E F0(abo)
+2.446 E -.15(ve)-.15 G 2.696(\). If).15 F(the last)144 468 Q F1(ar)2.83
+E(g)-.37 E F0 -.25(eva)2.72 G(luates to 0,).25 E F2(let)2.5 E F0
+(returns 1; 0 is returned otherwise.)2.5 E F2(local)108 484.8 Q F0([)2.5
+E F1(option)A F0 2.5(][)C F1(name)-2.5 E F0([=)A F1(value)A F0 2.5(].)C
+(.. | \255 ])-2.5 E -.15(Fo)144 496.8 S 2.541(re).15 G .041(ach ar)
+-2.541 F .042(gument, a local v)-.18 F .042(ariable named)-.25 F F1
+(name)2.902 E F0 .042(is created, and assigned)2.722 F F1(value)2.832 E
+F0 5.042(.T).18 G(he)-5.042 E F1(option)2.542 E F0 .042(can be)2.542 F
+(an)144 508.8 Q 3.153(yo)-.15 G 3.153(ft)-3.153 G .653
+(he options accepted by)-3.153 F F2(declar)3.153 E(e)-.18 E F0 5.652(.W)
+C(hen)-5.652 E F2(local)3.152 E F0 .652
+(is used within a function, it causes the v)3.152 F(ari-)-.25 E(able)144
+520.8 Q F1(name)3.281 E F0 .421(to ha)3.101 F .721 -.15(ve a v)-.2 H
+.422(isible scope restricted to that function and its children.).15 F
+(If)5.422 E F1(name)2.922 E F0 .422(is \255, the set)2.922 F .51
+(of shell options is made local to the function in which)144 532.8 R F2
+(local)3.009 E F0 .509(is in)3.009 F -.2(vo)-.4 G -.1(ke).2 G .509
+(d: shell options changed us-).1 F 1.17(ing the)144 544.8 R F2(set)3.67
+E F0 -.2(bu)3.67 G 1.171
+(iltin inside the function are restored to their original v).2 F 1.171
+(alues when the function re-)-.25 F 3.381(turns. The)144 556.8 R .881
+(restore is ef)3.381 F .881(fected as if a series of)-.25 F F2(set)3.381
+E F0 .88(commands were e)3.38 F -.15(xe)-.15 G .88
+(cuted to restore the v).15 F(alues)-.25 E .787
+(that were in place before the function.)144 568.8 R -.4(Wi)5.788 G .788
+(th no operands,).4 F F2(local)3.288 E F0 .788(writes a list of local v)
+3.288 F .788(ariables to)-.25 F .655(the standard output.)144 580.8 R
+.654(It is an error to use)5.655 F F2(local)3.154 E F0 .654
+(when not within a function.)3.154 F .654(The return status is 0)5.654 F
+(unless)144 592.8 Q F2(local)2.5 E F0(is used outside a function, an in)
+2.5 E -.25(va)-.4 G(lid).25 E F1(name)2.86 E F0(is supplied, or)2.68 E
+F1(name)2.5 E F0(is a readonly v)2.5 E(ariable.)-.25 E F2(logout)108
+609.6 Q F0(Exit a login shell.)144 609.6 Q F2(map\214le)108 626.4 Q F0
+([)2.5 E F2<ad64>A F1(delim)2.5 E F0 2.5(][)C F2<ad6e>-2.5 E F1(count)
+2.5 E F0 2.5(][)C F2<ad4f>-2.5 E F1(origin)2.5 E F0 2.5(][)C F2<ad73>
+-2.5 E F1(count)2.5 E F0 2.5(][)C F2<ad74>-2.5 E F0 2.5(][)C F2<ad75>
+-2.5 E F1(fd)2.5 E F0 2.5(][)C F2<ad43>-2.5 E F1(callbac)2.5 E(k)-.2 E
+F0 2.5(][)C F2<ad63>-2.5 E F1(quantum)2.5 E F0 2.5(][)C F1(arr)-2.5 E
+(ay)-.15 E F0(])A F2 -.18(re)108 638.4 S(adarray).18 E F0([)2.5 E F2
+<ad64>A F1(delim)2.5 E F0 2.5(][)C F2<ad6e>-2.5 E F1(count)2.5 E F0 2.5
+(][)C F2<ad4f>-2.5 E F1(origin)2.5 E F0 2.5(][)C F2<ad73>-2.5 E F1
+(count)2.5 E F0 2.5(][)C F2<ad74>-2.5 E F0 2.5(][)C F2<ad75>-2.5 E F1
+(fd)2.5 E F0 2.5(][)C F2<ad43>-2.5 E F1(callbac)2.5 E(k)-.2 E F0 2.5(][)
+C F2<ad63>-2.5 E F1(quantum)2.5 E F0 2.5(][)C F1(arr)-2.5 E(ay)-.15 E F0
+(])A .158(Read lines from the standard input into the inde)144 650.4 R
+-.15(xe)-.15 G 2.659(da).15 G .159(rray v)-2.659 F(ariable)-.25 E F1
+(arr)2.989 E(ay)-.15 E F0 2.659(,o).32 G 2.659(rf)-2.659 G .159
+(rom \214le descriptor)-2.659 F F1(fd)4.629 E F0 1.249(if the)144 662.4
+R F2<ad75>3.749 E F0 1.249(option is supplied.)3.749 F 1.249(The v)6.249
+F(ariable)-.25 E F3(MAPFILE)3.749 E F0 1.249(is the def)3.499 F(ault)-.1
+E F1(arr)3.748 E(ay)-.15 E F0 6.248(.O)C 1.248(ptions, if supplied,)
+-6.248 F(ha)144 674.4 Q .3 -.15(ve t)-.2 H(he follo).15 E
+(wing meanings:)-.25 E F2<ad64>144 686.4 Q F0 .91
+(The \214rst character of)180 686.4 R F1(delim)3.41 E F0 .911
+(is used to terminate each input line, rather than ne)3.41 F 3.411
+(wline. If)-.25 F F1(delim)180 698.4 Q F0(is the empty string,)2.5 E F2
+(map\214le)2.5 E F0(will terminate a line when it reads a NUL character)
+2.5 E(.)-.55 E F2<ad6e>144 710.4 Q F0(Cop)180 710.4 Q 2.5(ya)-.1 G 2.5
+(tm)-2.5 G(ost)-2.5 E F1(count)2.7 E F0 2.5(lines. If)3.18 F F1(count)
+2.5 E F0(is 0, all lines are copied.)2.5 E(GNU Bash 5.0)72 768 Q
+(2004 Apr 20)149.565 E(11)198.725 E 0 Cg EP
+%%Page: 12 12
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S(SH_B).35 E(UIL)-.1 E 87.61
+(TINS\(1\) General)-.92 F(Commands Manual)2.5 E -.35(BA)90.11 G(SH_B).35
+E(UIL)-.1 E(TINS\(1\))-.92 E/F1 10/Times-Bold@0 SF<ad4f>144 84 Q F0(Be)
+180 84 Q(gin assigning to)-.15 E/F2 10/Times-Italic@0 SF(arr)2.83 E(ay)
+-.15 E F0(at inde)2.82 E(x)-.15 E F2(origin)2.73 E F0 5(.T).24 G(he def)
+-5 E(ault inde)-.1 E 2.5(xi)-.15 G 2.5(s0)-2.5 G(.)-2.5 E F1<ad73>144 96
+Q F0(Discard the \214rst)180 96 Q F2(count)2.5 E F0(lines read.)2.5 E F1
+<ad74>144 108 Q F0(Remo)180 108 Q .3 -.15(ve a t)-.15 H(railing).15 E F2
+(delim)2.5 E F0(\(def)2.5 E(ault ne)-.1 E(wline\) from each line read.)
+-.25 E F1<ad75>144 120 Q F0(Read lines from \214le descriptor)180 120 Q
+F2(fd)2.5 E F0(instead of the standard input.)2.5 E F1<ad43>144 132 Q F0
+(Ev)180 132 Q(aluate)-.25 E F2(callbac)2.7 E(k)-.2 E F0(each time)3.17 E
+F2(quantum)2.5 E F0(lines are read.)2.5 E(The)5 E F1<ad63>2.5 E F0
+(option speci\214es)2.5 E F2(quantum)2.75 E F0(.).32 E F1<ad63>144 144 Q
+F0(Specify the number of lines read between each call to)180 144 Q F2
+(callbac)2.7 E(k)-.2 E F0(.).67 E(If)144 160.8 Q F1<ad43>2.968 E F0 .467
+(is speci\214ed without)2.967 F F1<ad63>2.967 E F0 2.967(,t)C .467
+(he def)-2.967 F .467(ault quantum is 5000.)-.1 F(When)5.467 E F2
+(callbac)2.967 E(k)-.2 E F0 .467(is e)2.967 F -.25(va)-.25 G .467
+(luated, it is sup-).25 F .261(plied the inde)144 172.8 R 2.761(xo)-.15
+G 2.761(ft)-2.761 G .261(he ne)-2.761 F .262(xt array element to be ass\
+igned and the line to be assigned to that element)-.15 F .275
+(as additional ar)144 184.8 R(guments.)-.18 E F2(callbac)5.275 E(k)-.2 E
+F0 .275(is e)2.775 F -.25(va)-.25 G .274
+(luated after the line is read b).25 F .274
+(ut before the array element is)-.2 F(assigned.)144 196.8 Q
+(If not supplied with an e)144 213.6 Q(xplicit origin,)-.15 E F1
+(map\214le)2.5 E F0(will clear)2.5 E F2(arr)2.5 E(ay)-.15 E F0
+(before assigning to it.)2.5 E F1(map\214le)144 230.4 Q F0 .797
+(returns successfully unless an in)3.297 F -.25(va)-.4 G .797
+(lid option or option ar).25 F .797(gument is supplied,)-.18 F F2(arr)
+3.297 E(ay)-.15 E F0 .798(is in-)3.298 F -.25(va)144 242.4 S
+(lid or unassignable, or if).25 E F2(arr)2.5 E(ay)-.15 E F0
+(is not an inde)2.5 E -.15(xe)-.15 G 2.5(da).15 G(rray)-2.5 E(.)-.65 E
+F1(popd)108 259.2 Q F0<5bad>2.5 E F1(n)A F0 2.5(][)C(+)-2.5 E F2(n)A F0
+2.5(][)C<ad>-2.5 E F2(n)A F0(])A(Remo)144 271.2 Q -.15(ve)-.15 G 2.8(se)
+.15 G .3(ntries from the directory stack.)-2.8 F -.4(Wi)5.299 G .299
+(th no ar).4 F .299(guments, remo)-.18 F -.15(ve)-.15 G 2.799(st).15 G
+.299(he top directory from the)-2.799 F 1.478(stack, and performs a)144
+283.2 R F1(cd)3.978 E F0 1.479(to the ne)3.978 F 3.979(wt)-.25 G 1.479
+(op directory)-3.979 F 6.479(.A)-.65 G -.18(rg)-6.479 G 1.479
+(uments, if supplied, ha).18 F 1.779 -.15(ve t)-.2 H 1.479(he follo).15
+F(wing)-.25 E(meanings:)144 295.2 Q F1<ad6e>144 307.2 Q F0 .551
+(Suppresses the normal change of directory when remo)180 307.2 R .551
+(ving directories from the stack, so)-.15 F
+(that only the stack is manipulated.)180 319.2 Q F1(+)144 331.2 Q F2(n)A
+F0(Remo)180 331.2 Q -.15(ve)-.15 G 2.64(st).15 G(he)-2.64 E F2(n)2.64 E
+F0 .14(th entry counting from the left of the list sho)B .14(wn by)-.25
+F F1(dirs)2.64 E F0 2.64(,s)C .14(tarting with zero.)-2.64 F -.15(Fo)180
+343.2 S 2.5(re).15 G(xample:)-2.65 E/F3 10/Courier@0 SF(popd +0)2.5 E F0
+(remo)2.5 E -.15(ve)-.15 G 2.5(st).15 G(he \214rst directory)-2.5 E(,)
+-.65 E F3(popd +1)2.5 E F0(the second.)2.5 E F1<ad>144 355.2 Q F2(n)A F0
+(Remo)180 355.2 Q -.15(ve)-.15 G 3.76(st).15 G(he)-3.76 E F2(n)3.76 E F0
+1.259(th entry counting from the right of the list sho)B 1.259(wn by)
+-.25 F F1(dirs)3.759 E F0 3.759(,s)C 1.259(tarting with)-3.759 F 2.5
+(zero. F)180 367.2 R(or e)-.15 E(xample:)-.15 E F3(popd -0)2.5 E F0
+(remo)2.5 E -.15(ve)-.15 G 2.5(st).15 G(he last directory)-2.5 E(,)-.65
+E F3(popd -1)2.5 E F0(the ne)2.5 E(xt to last.)-.15 E .643(If the)144
+384 R F1(popd)3.143 E F0 .643(command is successful, a)3.143 F F1(dirs)
+3.143 E F0 .644(is performed as well, and the return status is 0.)3.143
+F F1(popd)5.644 E F0 .416(returns f)144 396 R .416(alse if an in)-.1 F
+-.25(va)-.4 G .415
+(lid option is encountered, the directory stack is empty).25 F 2.915
+(,an)-.65 G(on-e)-2.915 E .415(xistent direc-)-.15 F
+(tory stack entry is speci\214ed, or the directory change f)144 408 Q
+(ails.)-.1 E F1(printf)108 424.8 Q F0([)2.5 E F1<ad76>A F2(var)2.5 E F0
+(])A F2(format)2.5 E F0([)2.5 E F2(ar)A(guments)-.37 E F0(])A .357
+(Write the formatted)144 436.8 R F2(ar)2.857 E(guments)-.37 E F0 .357
+(to the standard output under the control of the)2.857 F F2(format)2.858
+E F0 5.358(.T)C(he)-5.358 E F1<ad76>2.858 E F0(op-)2.858 E .714
+(tion causes the output to be assigned to the v)144 448.8 R(ariable)-.25
+E F2(var)3.214 E F0 .714(rather than being printed to the standard)3.214
+F(output.)144 460.8 Q(The)144 484.8 Q F2(format)3.017 E F0 .517(is a ch\
+aracter string which contains three types of objects: plain characters,\
+ which are)3.017 F .704(simply copied to standard output, character esc\
+ape sequences, which are con)144 496.8 R -.15(ve)-.4 G .703
+(rted and copied to).15 F .036(the standard output, and format speci\
+\214cations, each of which causes printing of the ne)144 508.8 R .037
+(xt successi)-.15 F -.15(ve)-.25 G F2(ar)144 520.8 Q(gument)-.37 E F0
+5.532(.I)C 3.032(na)-5.532 G .532(ddition to the standard)-3.032 F F2
+(printf)3.032 E F0 .532(\(1\) format speci\214cations,)B F1(printf)3.031
+E F0 .531(interprets the follo)3.031 F(w-)-.25 E(ing e)144 532.8 Q
+(xtensions:)-.15 E F1(%b)144 544.8 Q F0(causes)180 544.8 Q F1(printf)
+2.595 E F0 .096(to e)2.595 F .096
+(xpand backslash escape sequences in the corresponding)-.15 F F2(ar)
+2.596 E(gument)-.37 E F0 .096(in the)2.596 F(same w)180 556.8 Q(ay as)
+-.1 E F1(echo \255e)2.5 E F0(.)A F1(%q)144 568.8 Q F0(causes)180 568.8 Q
+F1(printf)2.51 E F0 .01(to output the corresponding)2.51 F F2(ar)2.51 E
+(gument)-.37 E F0 .01(in a format that can be reused as shell)2.51 F
+(input.)180 580.8 Q F1(%\()144 592.8 Q F2(datefmt)A F1(\)T)A F0(causes)
+180 604.8 Q F1(printf)4.403 E F0 1.904
+(to output the date-time string resulting from using)4.403 F F2(datefmt)
+4.404 E F0 1.904(as a format)4.404 F .381(string for)180 616.8 R F2
+(strftime)2.881 E F0 2.881(\(3\). The)B(corresponding)2.881 E F2(ar)
+2.881 E(gument)-.37 E F0 .381(is an inte)2.881 F .381
+(ger representing the number)-.15 F .292(of seconds since the epoch.)180
+628.8 R -1 -.8(Tw o)5.293 H .293(special ar)3.593 F .293(gument v)-.18 F
+.293(alues may be used: \2551 represents the)-.25 F .694
+(current time, and \2552 represents the time the shell w)180 640.8 R
+.693(as in)-.1 F -.2(vo)-.4 G -.1(ke).2 G 3.193(d. If).1 F .693(no ar)
+3.193 F .693(gument is speci-)-.18 F .21(\214ed, con)180 652.8 R -.15
+(ve)-.4 G .21(rsion beha).15 F -.15(ve)-.2 G 2.71(sa).15 G 2.71(si)-2.71
+G 2.71<66ad>-2.71 G 2.71(1h)-2.71 G .21(ad been gi)-2.71 F -.15(ve)-.25
+G 2.71(n. This).15 F .21(is an e)2.71 F .21(xception to the usual)-.15 F
+F1(printf)2.71 E F0(beha)180 664.8 Q(vior)-.2 E(.)-.55 E .902
+(The %b, %q, and %T directi)144 681.6 R -.15(ve)-.25 G 3.401(sa).15 G
+.901(ll use the \214eld width and precision ar)-3.401 F .901
+(guments from the format)-.18 F .357(speci\214cation and write that man)
+144 693.6 R 2.857(yb)-.15 G .358
+(ytes from \(or use that wide a \214eld for\) the e)-2.857 F .358
+(xpanded ar)-.15 F(gument,)-.18 E
+(which usually contains more characters than the original.)144 705.6 Q
+(Ar)144 722.4 Q .464(guments to non-string format speci\214ers are trea\
+ted as C constants, e)-.18 F .463(xcept that a leading plus or)-.15 F
+(GNU Bash 5.0)72 768 Q(2004 Apr 20)149.565 E(12)198.725 E 0 Cg EP
+%%Page: 13 13
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S(SH_B).35 E(UIL)-.1 E 87.61
+(TINS\(1\) General)-.92 F(Commands Manual)2.5 E -.35(BA)90.11 G(SH_B).35
+E(UIL)-.1 E(TINS\(1\))-.92 E 1.258(minus sign is allo)144 84 R 1.259
+(wed, and if the leading character is a single or double quote, the v)
+-.25 F 1.259(alue is the)-.25 F(ASCII v)144 96 Q(alue of the follo)-.25
+E(wing character)-.25 E(.)-.55 E(The)144 112.8 Q/F1 10/Times-Italic@0 SF
+(format)2.515 E F0 .015(is reused as necessary to consume all of the)
+2.515 F F1(ar)2.515 E(guments)-.37 E F0 5.015(.I)C 2.514(ft)-5.015 G(he)
+-2.514 E F1(format)2.514 E F0 .014(requires more)2.514 F F1(ar)2.514 E
+(-)-.2 E(guments)144 124.8 Q F0 .565(than are supplied, the e)3.065 F
+.566(xtra format speci\214cations beha)-.15 F .866 -.15(ve a)-.2 H 3.066
+(si).15 G 3.066(faz)-3.066 G .566(ero v)-3.066 F .566
+(alue or null string,)-.25 F(as appropriate, had been supplied.)144
+136.8 Q(The return v)5 E(alue is zero on success, non-zero on f)-.25 E
+(ailure.)-.1 E/F2 10/Times-Bold@0 SF(pushd)108 153.6 Q F0([)2.5 E F2
+<ad6e>A F0 2.5(][)C(+)-2.5 E F1(n)A F0 2.5(][)C<ad>-2.5 E F1(n)A F0(])A
+F2(pushd)108 165.6 Q F0([)2.5 E F2<ad6e>A F0 2.5(][)C F1(dir)-2.5 E F0
+(])A .64(Adds a directory to the top of the directory stack, or rotates\
+ the stack, making the ne)144 177.6 R 3.139(wt)-.25 G .639(op of the)
+-3.139 F .416(stack the current w)144 189.6 R .416(orking directory)-.1
+F 5.416(.W)-.65 G .416(ith no ar)-5.816 F(guments,)-.18 E F2(pushd)2.916
+E F0 -.15(ex)2.916 G .416(changes the top tw).15 F 2.917(od)-.1 G
+(irectories)-2.917 E 1.625
+(and returns 0, unless the directory stack is empty)144 201.6 R 6.625
+(.A)-.65 G -.18(rg)-6.625 G 1.625(uments, if supplied, ha).18 F 1.925
+-.15(ve t)-.2 H 1.625(he follo).15 F(wing)-.25 E(meanings:)144 213.6 Q
+F2<ad6e>144 225.6 Q F0 1.811(Suppresses the normal change of directory \
+when rotating or adding directories to the)180 225.6 R
+(stack, so that only the stack is manipulated.)180 237.6 Q F2(+)144
+249.6 Q F1(n)A F0 1.268(Rotates the stack so that the)180 249.6 R F1(n)
+3.768 E F0 1.267(th directory \(counting from the left of the list sho)B
+1.267(wn by)-.25 F F2(dirs)180 261.6 Q F0 2.5(,s)C
+(tarting with zero\) is at the top.)-2.5 E F2<ad>144 273.6 Q F1(n)A F0
+.92(Rotates the stack so that the)180 273.6 R F1(n)3.42 E F0 .92
+(th directory \(counting from the right of the list sho)B .92(wn by)-.25
+F F2(dirs)180 285.6 Q F0 2.5(,s)C(tarting with zero\) is at the top.)
+-2.5 E F1(dir)144.35 297.6 Q F0(Adds)180 297.6 Q F1(dir)3.138 E F0 .288
+(to the directory stack at the top, making it the ne)3.518 F 2.787(wc)
+-.25 G .287(urrent w)-2.787 F .287(orking directory as)-.1 F
+(if it had been supplied as the ar)180 309.6 Q(gument to the)-.18 E F2
+(cd)2.5 E F0 -.2(bu)2.5 G(iltin.).2 E .488(If the)144 326.4 R F2(pushd)
+2.988 E F0 .488(command is successful, a)2.988 F F2(dirs)2.988 E F0 .488
+(is performed as well.)2.988 F .489(If the \214rst form is used,)5.488 F
+F2(pushd)2.989 E F0 1.04(returns 0 unless the cd to)144 338.4 R F1(dir)
+3.89 E F0 -.1(fa)4.27 G 3.539(ils. W).1 F 1.039(ith the second form,)-.4
+F F2(pushd)3.539 E F0 1.039(returns 0 unless the directory)3.539 F .846
+(stack is empty)144 350.4 R 3.346(,an)-.65 G(on-e)-3.346 E .847(xistent\
+ directory stack element is speci\214ed, or the directory change to the)
+-.15 F(speci\214ed ne)144 362.4 Q 2.5(wc)-.25 G(urrent directory f)-2.5
+E(ails.)-.1 E F2(pwd)108 379.2 Q F0([)2.5 E F2(\255LP)A F0(])A .845
+(Print the absolute pathname of the current w)144 391.2 R .845
+(orking directory)-.1 F 5.844(.T)-.65 G .844
+(he pathname printed contains no)-5.844 F .181(symbolic links if the)144
+403.2 R F2<ad50>2.681 E F0 .181(option is supplied or the)2.681 F F2
+.181(\255o ph)2.681 F(ysical)-.15 E F0 .181(option to the)2.681 F F2
+(set)2.681 E F0 -.2(bu)2.681 G .182(iltin command is).2 F 3.264
+(enabled. If)144 415.2 R(the)3.264 E F2<ad4c>3.264 E F0 .763
+(option is used, the pathname printed may contain symbolic links.)3.264
+F .763(The return)5.763 F .405(status is 0 unless an error occurs while\
+ reading the name of the current directory or an in)144 427.2 R -.25(va)
+-.4 G .405(lid op-).25 F(tion is supplied.)144 439.2 Q F2 -.18(re)108
+456 S(ad).18 E F0([)3.817 E F2(\255ers)A F0 3.817(][)C F2<ad61>-3.817 E
+F1(aname)3.817 E F0 3.817(][)C F2<ad64>-3.817 E F1(delim)3.817 E F0
+3.817(][)C F2<ad69>-3.817 E F1(te)3.817 E(xt)-.2 E F0 3.817(][)C F2
+<ad6e>-3.817 E F1(nc)3.816 E(har)-.15 E(s)-.1 E F0 3.816(][)C F2<ad4e>
+-3.816 E F1(nc)3.816 E(har)-.15 E(s)-.1 E F0 3.816(][)C F2<ad70>-3.816 E
+F1(pr)3.816 E(ompt)-.45 E F0 3.816(][)C F2<ad74>-3.816 E F1(timeout)
+3.816 E F0 3.816(][)C F2<ad75>-3.816 E F1(fd)3.816 E F0(])A([)108 468 Q
+F1(name)A F0(...])2.5 E .516(One line is read from the standard input, \
+or from the \214le descriptor)144 480 R F1(fd)3.016 E F0 .516
+(supplied as an ar)3.016 F .517(gument to)-.18 F(the)144 492 Q F2<ad75>
+2.936 E F0 .436(option, split into w)2.936 F .435(ords as described abo)
+-.1 F .735 -.15(ve u)-.15 H(nder).15 E F2 -.75(Wo)2.935 G .435
+(rd Splitting).75 F F0 2.935(,a)C .435(nd the \214rst w)-2.935 F .435
+(ord is as-)-.1 F .375(signed to the \214rst)144 504 R F1(name)3.235 E
+F0 2.876(,t).18 G .376(he second w)-2.876 F .376(ord to the second)-.1 F
+F1(name)3.236 E F0 2.876(,a).18 G .376(nd so on.)-2.876 F .376
+(If there are more w)5.376 F(ords)-.1 E .237
+(than names, the remaining w)144 516 R .237(ords and their interv)-.1 F
+.237(ening delimiters are assigned to the last)-.15 F F1(name)3.096 E F0
+5.236(.I).18 G(f)-5.236 E .874(there are fe)144 528 R .874(wer w)-.25 F
+.875(ords read from the input stream than names, the remaining names ar\
+e assigned)-.1 F .518(empty v)144 540 R 3.018(alues. The)-.25 F .518
+(characters in)3.018 F/F3 9/Times-Bold@0 SF(IFS)3.018 E F0 .518
+(are used to split the line into w)2.768 F .517
+(ords using the same rules the)-.1 F .026(shell uses for e)144 552 R
+.026(xpansion \(described abo)-.15 F .326 -.15(ve u)-.15 H(nder).15 E F2
+-.75(Wo)2.526 G .026(rd Splitting).75 F F0 2.526(\). The)B .026
+(backslash character \()2.526 F F2(\\)A F0 2.527(\)m)C(ay)-2.527 E .489
+(be used to remo)144 564 R .788 -.15(ve a)-.15 H .788 -.15(ny s).15 H
+.488(pecial meaning for the ne).15 F .488
+(xt character read and for line continuation.)-.15 F(Op-)5.488 E
+(tions, if supplied, ha)144 576 Q .3 -.15(ve t)-.2 H(he follo).15 E
+(wing meanings:)-.25 E F2<ad61>144 588 Q F1(aname)2.5 E F0 1.025(The w)
+180 600 R 1.026(ords are assigned to sequential indices of the array v)
+-.1 F(ariable)-.25 E F1(aname)3.856 E F0 3.526(,s).18 G 1.026
+(tarting at 0.)-3.526 F F1(aname)180.33 612 Q F0(is unset before an)2.68
+E 2.5(yn)-.15 G .5 -.25(ew va)-2.5 H(lues are assigned.).25 E(Other)5 E
+F1(name)2.5 E F0(ar)2.5 E(guments are ignored.)-.18 E F2<ad64>144 624 Q
+F1(delim)2.5 E F0 .281(The \214rst character of)180 636 R F1(delim)2.781
+E F0 .281(is used to terminate the input line, rather than ne)2.781 F
+2.78(wline. If)-.25 F F1(de-)2.78 E(lim)180 648 Q F0
+(is the empty string,)2.5 E F2 -.18(re)2.5 G(ad).18 E F0
+(will terminate a line when it reads a NUL character)2.5 E(.)-.55 E F2
+<ad65>144 660 Q F0 .372
+(If the standard input is coming from a terminal,)180 660 R F2 -.18(re)
+2.873 G(adline).18 E F0(\(see)2.873 E F3(READLINE)2.873 E F0(abo)2.623 E
+-.15(ve)-.15 G 2.873(\)i).15 G 2.873(su)-2.873 G(sed)-2.873 E .218
+(to obtain the line.)180 672 R .218(Readline uses the current \(or def)
+5.218 F .218(ault, if line editing w)-.1 F .218(as not pre)-.1 F
+(viously)-.25 E(acti)180 684 Q -.15(ve)-.25 G 2.5(\)e).15 G
+(diting settings, b)-2.5 E(ut uses Readline')-.2 E 2.5(sd)-.55 G(ef)-2.5
+E(ault \214lename completion.)-.1 E F2<ad69>144 696 Q F1(te)2.5 E(xt)-.2
+E F0(If)180 696 Q F2 -.18(re)2.715 G(adline).18 E F0 .216
+(is being used to read the line,)2.715 F F1(te)2.716 E(xt)-.2 E F0 .216
+(is placed into the editing b)2.716 F(uf)-.2 E .216(fer before edit-)
+-.25 F(ing be)180 708 Q(gins.)-.15 E(GNU Bash 5.0)72 768 Q(2004 Apr 20)
+149.565 E(13)198.725 E 0 Cg EP
+%%Page: 14 14
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S(SH_B).35 E(UIL)-.1 E 87.61
+(TINS\(1\) General)-.92 F(Commands Manual)2.5 E -.35(BA)90.11 G(SH_B).35
+E(UIL)-.1 E(TINS\(1\))-.92 E/F1 10/Times-Bold@0 SF<ad6e>144 84 Q/F2 10
+/Times-Italic@0 SF(nc)2.5 E(har)-.15 E(s)-.1 E F1 -.18(re)180 96 S(ad)
+.18 E F0 .323(returns after reading)2.823 F F2(nc)2.823 E(har)-.15 E(s)
+-.1 E F0 .323(characters rather than w)2.823 F .323
+(aiting for a complete line of in-)-.1 F(put, b)180 108 Q
+(ut honors a delimiter if fe)-.2 E(wer than)-.25 E F2(nc)2.5 E(har)-.15
+E(s)-.1 E F0(characters are read before the delimiter)2.5 E(.)-.55 E F1
+<ad4e>144 120 Q F2(nc)2.5 E(har)-.15 E(s)-.1 E F1 -.18(re)180 132 S(ad)
+.18 E F0 1.269(returns after reading e)3.769 F(xactly)-.15 E F2(nc)3.769
+E(har)-.15 E(s)-.1 E F0 1.269(characters rather than w)3.769 F 1.27
+(aiting for a complete)-.1 F .275
+(line of input, unless EOF is encountered or)180 144 R F1 -.18(re)2.775
+G(ad).18 E F0 .274(times out.)2.774 F .274(Delimiter characters encoun-)
+5.274 F 1.002
+(tered in the input are not treated specially and do not cause)180 156 R
+F1 -.18(re)3.503 G(ad).18 E F0 1.003(to return until)3.503 F F2(nc)3.503
+E(har)-.15 E(s)-.1 E F0 .609(characters are read.)180 168 R .608
+(The result is not split on the characters in)5.609 F F1(IFS)3.108 E F0
+3.108(;t)C .608(he intent is that the)-3.108 F -.25(va)180 180 S .669
+(riable is assigned e).25 F .669
+(xactly the characters read \(with the e)-.15 F .67
+(xception of backslash; see the)-.15 F F1<ad72>180 192 Q F0(option belo)
+2.5 E(w\).)-.25 E F1<ad70>144 204 Q F2(pr)2.5 E(ompt)-.45 E F0(Display)
+180 216 Q F2(pr)3.661 E(ompt)-.45 E F0 1.161(on standard error)3.661 F
+3.661(,w)-.4 G 1.161(ithout a trailing ne)-3.661 F 1.161
+(wline, before attempting to read)-.25 F(an)180 228 Q 2.5(yi)-.15 G 2.5
+(nput. The)-2.5 F
+(prompt is displayed only if input is coming from a terminal.)2.5 E F1
+<ad72>144 240 Q F0 .543(Backslash does not act as an escape character)
+180 240 R 5.543(.T)-.55 G .544(he backslash is considered to be part of)
+-5.543 F .493(the line.)180 252 R .493(In particular)5.493 F 2.993(,ab)
+-.4 G(ackslash-ne)-2.993 E .493
+(wline pair may not then be used as a line continua-)-.25 F(tion.)180
+264 Q F1<ad73>144 276 Q F0(Silent mode.)180 276 Q
+(If input is coming from a terminal, characters are not echoed.)5 E F1
+<ad74>144 288 Q F2(timeout)2.5 E F0(Cause)180 300 Q F1 -.18(re)2.928 G
+(ad).18 E F0 .428(to time out and return f)2.928 F .428
+(ailure if a complete line of input \(or a speci\214ed num-)-.1 F .561
+(ber of characters\) is not read within)180 312 R F2(timeout)3.061 E F0
+(seconds.)3.061 E F2(timeout)5.561 E F0 .56(may be a decimal number)
+3.061 F(with a fractional portion follo)180 324 Q
+(wing the decimal point.)-.25 E(This option is only ef)5 E(fecti)-.25 E
+.3 -.15(ve i)-.25 H(f).15 E F1 -.18(re)2.5 G(ad).18 E F0 .506(is readin\
+g input from a terminal, pipe, or other special \214le; it has no ef)180
+336 R .505(fect when reading)-.25 F .589(from re)180 348 R .589
+(gular \214les.)-.15 F(If)5.589 E F1 -.18(re)3.089 G(ad).18 E F0 .589
+(times out,)3.089 F F1 -.18(re)3.089 G(ad).18 E F0(sa)3.089 E -.15(ve)
+-.2 G 3.089(sa).15 G .889 -.15(ny p)-3.089 H .59
+(artial input read into the speci\214ed).15 F -.25(va)180 360 S(riable)
+.25 E F2(name)2.77 E F0 5.27(.I)C(f)-5.27 E F2(timeout)2.77 E F0 .27
+(is 0,)2.77 F F1 -.18(re)2.77 G(ad).18 E F0 .27(returns immediately)2.77
+F 2.77(,w)-.65 G .27(ithout trying to read an)-2.77 F 2.77(yd)-.15 G
+(ata.)-2.77 E 1.12(The e)180 372 R 1.12(xit status is 0 if input is a)
+-.15 F -.25(va)-.2 G 1.12(ilable on the speci\214ed \214le descriptor)
+.25 F 3.62(,n)-.4 G 1.12(on-zero other)-3.62 F(-)-.2 E 2.5(wise. The)180
+384 R -.15(ex)2.5 G(it status is greater than 128 if the timeout is e)
+.15 E(xceeded.)-.15 E F1<ad75>144 396 Q F2(fd)2.5 E F0
+(Read input from \214le descriptor)180 396 Q F2(fd)2.5 E F0(.)A .522
+(If no)144 412.8 R F2(names)3.382 E F0 .522
+(are supplied, the line read, without the ending delimiter b)3.292 F
+.522(ut otherwise unmodi\214ed, is)-.2 F 1.186(assigned to the v)144
+424.8 R(ariable)-.25 E/F3 9/Times-Bold@0 SF(REPL)3.686 E(Y)-.828 E/F4 9
+/Times-Roman@0 SF(.)A F0 1.186(The e)5.686 F 1.186
+(xit status is zero, unless end-of-\214le is encountered,)-.15 F F1 -.18
+(re)3.687 G(ad).18 E F0 .961
+(times out \(in which case the status is greater than 128\), a v)144
+436.8 R .96(ariable assignment error \(such as as-)-.25 F .706
+(signing to a readonly v)144 448.8 R .706(ariable\) occurs, or an in)
+-.25 F -.25(va)-.4 G .706(lid \214le descriptor is supplied as the ar)
+.25 F .707(gument to)-.18 F F1<ad75>144 460.8 Q F0(.)A F1 -.18(re)108
+477.6 S(adonly).18 E F0([)2.5 E F1(\255aAf)A F0 2.5(][)C F1<ad70>-2.5 E
+F0 2.5(][)C F2(name)-2.5 E F0([=)A F2(wor)A(d)-.37 E F0 2.5(].)C(..])
+-2.5 E .77(The gi)144 489.6 R -.15(ve)-.25 G(n).15 E F2(names)3.27 E F0
+.77(are mark)3.27 F .77(ed readonly; the v)-.1 F .77(alues of these)-.25
+F F2(names)3.63 E F0 .77(may not be changed by subse-)3.54 F 1.096
+(quent assignment.)144 501.6 R 1.096(If the)6.096 F F1<ad66>3.596 E F0
+1.097(option is supplied, the functions corresponding to the)3.596 F F2
+(names)3.597 E F0 1.097(are so)3.597 F(mark)144 513.6 Q 3.334(ed. The)
+-.1 F F1<ad61>3.334 E F0 .834(option restricts the v)3.334 F .834
+(ariables to inde)-.25 F -.15(xe)-.15 G 3.334(da).15 G .834(rrays; the)
+-3.334 F F1<ad41>3.334 E F0 .834(option restricts the v)3.334 F(ari-)
+-.25 E .776(ables to associati)144 525.6 R 1.076 -.15(ve a)-.25 H 3.276
+(rrays. If).15 F .777(both options are supplied,)3.276 F F1<ad41>3.277 E
+F0(tak)3.277 E .777(es precedence.)-.1 F .777(If no)5.777 F F2(name)
+3.637 E F0(ar)3.457 E(gu-)-.18 E .522(ments are gi)144 537.6 R -.15(ve)
+-.25 G .521(n, or if the).15 F F1<ad70>3.021 E F0 .521
+(option is supplied, a list of all readonly names is printed.)3.021 F
+.521(The other)5.521 F .295(options may be used to restrict the output \
+to a subset of the set of readonly names.)144 549.6 R(The)5.296 E F1
+<ad70>2.796 E F0(option)2.796 E .786
+(causes output to be displayed in a format that may be reused as input.)
+144 561.6 R .786(If a v)5.786 F .785(ariable name is fol-)-.25 F(lo)144
+573.6 Q .717(wed by =)-.25 F F2(wor)A(d)-.37 E F0 3.218(,t)C .718(he v)
+-3.218 F .718(alue of the v)-.25 F .718(ariable is set to)-.25 F F2(wor)
+3.218 E(d)-.37 E F0 5.718(.T)C .718(he return status is 0 unless an in)
+-5.718 F -.25(va)-.4 G(lid).25 E .26(option is encountered, one of the)
+144 585.6 R F2(names)3.12 E F0 .26(is not a v)3.03 F .26(alid shell v)
+-.25 F .26(ariable name, or)-.25 F F1<ad66>2.76 E F0 .26
+(is supplied with a)2.76 F F2(name)144.36 597.6 Q F0
+(that is not a function.)2.68 E F1 -.18(re)108 614.4 S(tur).18 E(n)-.15
+E F0([)2.5 E F2(n)A F0(])A .02(Causes a function to stop e)144 626.4 R
+-.15(xe)-.15 G .02(cuting and return the v).15 F .021
+(alue speci\214ed by)-.25 F F2(n)2.881 E F0 .021(to its caller)2.761 F
+5.021(.I)-.55 G(f)-5.021 E F2(n)2.881 E F0 .021(is omitted,)2.761 F .597
+(the return status is that of the last command e)144 638.4 R -.15(xe)
+-.15 G .596(cuted in the function body).15 F 5.596(.I)-.65 G(f)-5.596 E
+F1 -.18(re)3.096 G(tur).18 E(n)-.15 E F0 .596(is e)3.096 F -.15(xe)-.15
+G(cuted).15 E .267(by a trap handler)144 650.4 R 2.767(,t)-.4 G .267
+(he last command used to determine the status is the last command e)
+-2.767 F -.15(xe)-.15 G .268(cuted be-).15 F .02(fore the trap handler)
+144 662.4 R 5.02(.I)-.55 G(f)-5.02 E F1 -.18(re)2.52 G(tur).18 E(n)-.15
+E F0 .02(is e)2.52 F -.15(xe)-.15 G .02(cuted during a).15 F F1(DEB)2.52
+E(UG)-.1 E F0 .02(trap, the last command used to deter)2.52 F(-)-.2 E
+.885(mine the status is the last command e)144 674.4 R -.15(xe)-.15 G
+.886(cuted by the trap handler before).15 F F1 -.18(re)3.386 G(tur).18 E
+(n)-.15 E F0 -.1(wa)3.386 G 3.386(si).1 G -1.9 -.4(nv o)-3.386 H -.1(ke)
+.4 G 3.386(d. If).1 F F1 -.18(re)144 686.4 S(tur).18 E(n)-.15 E F0 .628
+(is used outside a function, b)3.128 F .628(ut during e)-.2 F -.15(xe)
+-.15 G .628(cution of a script by the).15 F F1(.)3.127 E F0(\()5.627 E
+F1(sour)A(ce)-.18 E F0 3.127(\)c)C .627(ommand, it)-3.127 F .588
+(causes the shell to stop e)144 698.4 R -.15(xe)-.15 G .588
+(cuting that script and return either).15 F F2(n)3.448 E F0 .589
+(or the e)3.329 F .589(xit status of the last com-)-.15 F .326(mand e)
+144 710.4 R -.15(xe)-.15 G .326(cuted within the script as the e).15 F
+.326(xit status of the script.)-.15 F(If)5.326 E F2(n)2.826 E F0 .325
+(is supplied, the return v)2.826 F .325(alue is)-.25 F 2.035
+(its least signi\214cant 8 bits.)144 722.4 R 2.035
+(The return status is non-zero if)7.035 F F1 -.18(re)4.536 G(tur).18 E
+(n)-.15 E F0 2.036(is supplied a non-numeric)4.536 F(GNU Bash 5.0)72 768
+Q(2004 Apr 20)149.565 E(14)198.725 E 0 Cg EP
+%%Page: 15 15
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S(SH_B).35 E(UIL)-.1 E 87.61
+(TINS\(1\) General)-.92 F(Commands Manual)2.5 E -.35(BA)90.11 G(SH_B).35
+E(UIL)-.1 E(TINS\(1\))-.92 E(ar)144 84 Q .706
+(gument, or is used outside a function and not during e)-.18 F -.15(xe)
+-.15 G .705(cution of a script by).15 F/F1 10/Times-Bold@0 SF(.)3.205 E
+F0(or)4.038 E F1(sour)3.205 E(ce)-.18 E F0 5.705(.A)C -.15(ny)-5.705 G
+.365(command associated with the)144 96 R F1(RETURN)2.865 E F0 .365
+(trap is e)2.865 F -.15(xe)-.15 G .365(cuted before e).15 F -.15(xe)-.15
+G .366(cution resumes after the func-).15 F(tion or script.)144 108 Q F1
+(set)108 124.8 Q F0([)2.5 E F1(\255\255abefhkmnptuvxBCEHPT)A F0 2.5(][)C
+F1<ad6f>-2.5 E/F2 10/Times-Italic@0 SF(option\255name)2.5 E F0 2.5(][)C
+F2(ar)-2.5 E(g)-.37 E F0(...])2.5 E F1(set)108 136.8 Q F0([)2.5 E F1
+(+abefhkmnptuvxBCEHPT)A F0 2.5(][)C F1(+o)-2.5 E F2(option\255name)2.5 E
+F0 2.5(][)C F2(ar)-2.5 E(g)-.37 E F0(...])2.5 E -.4(Wi)144 148.8 S .836
+(thout options, the name and v).4 F .835(alue of each shell v)-.25 F
+.835(ariable are displayed in a format that can be)-.25 F .784
+(reused as input for setting or resetting the currently-set v)144 160.8
+R 3.284(ariables. Read-only)-.25 F -.25(va)3.284 G .784
+(riables cannot be).25 F 2.947(reset. In)144 172.8 R F2 .447(posix mode)
+2.947 F F0 2.947(,o)C .447(nly shell v)-2.947 F .447
+(ariables are listed.)-.25 F .447
+(The output is sorted according to the current)5.447 F 3.53
+(locale. When)144 184.8 R 1.031(options are speci\214ed, the)3.53 F
+3.531(ys)-.15 G 1.031(et or unset shell attrib)-3.531 F 3.531(utes. An)
+-.2 F 3.531(ya)-.15 G -.18(rg)-3.531 G 1.031(uments remaining).18 F .585
+(after option processing are treated as v)144 196.8 R .584
+(alues for the positional parameters and are assigned, in or)-.25 F(-)
+-.2 E(der)144 208.8 Q 2.5(,t)-.4 G(o)-2.5 E F1($1)2.5 E F0(,)A F1($2)2.5
+E F0(,)A F1 2.5(... $)2.5 F F2(n)A F0 5(.O)C(ptions, if speci\214ed, ha)
+-5 E .3 -.15(ve t)-.2 H(he follo).15 E(wing meanings:)-.25 E F1<ad61>144
+220.8 Q F0 1.377(Each v)184 220.8 R 1.377
+(ariable or function that is created or modi\214ed is gi)-.25 F -.15(ve)
+-.25 G 3.877(nt).15 G 1.377(he e)-3.877 F 1.378(xport attrib)-.15 F
+1.378(ute and)-.2 F(mark)184 232.8 Q(ed for e)-.1 E(xport to the en)-.15
+E(vironment of subsequent commands.)-.4 E F1<ad62>144 244.8 Q F0 .132
+(Report the status of terminated background jobs immediately)184 244.8 R
+2.632(,r)-.65 G .131(ather than before the ne)-2.632 F(xt)-.15 E
+(primary prompt.)184 256.8 Q(This is ef)5 E(fecti)-.25 E .3 -.15(ve o)
+-.25 H(nly when job control is enabled.).15 E F1<ad65>144 268.8 Q F0
+.087(Exit immediately if a)184 268.8 R F2(pipeline)2.587 E F0 .087
+(\(which may consist of a single)2.587 F F2 .088(simple command)2.588 F
+F0 .088(\), a)B F2(list)2.588 E F0 2.588(,o)C(r)-2.588 E(a)184 280.8 Q
+F2 1.521(compound command)4.021 F F0(\(see)4.021 E/F3 9/Times-Bold@0 SF
+1.521(SHELL GRAMMAR)4.021 F F0(abo)3.771 E -.15(ve)-.15 G 1.521(\), e)
+.15 F 1.521(xits with a non-zero status.)-.15 F .079
+(The shell does not e)184 292.8 R .079(xit if the command that f)-.15 F
+.08(ails is part of the command list immediately)-.1 F(follo)184 304.8 Q
+1.655(wing a)-.25 F F1(while)4.155 E F0(or)4.155 E F1(until)4.155 E F0
+-.1(ke)4.155 G(yw)-.05 E 1.655(ord, part of the test follo)-.1 F 1.654
+(wing the)-.25 F F1(if)4.154 E F0(or)4.154 E F1(elif)4.154 E F0(reserv)
+4.154 E(ed)-.15 E -.1(wo)184 316.8 S .581(rds, part of an).1 F 3.081(yc)
+-.15 G .581(ommand e)-3.081 F -.15(xe)-.15 G .581(cuted in a).15 F F1
+(&&)3.081 E F0(or)3.081 E F1(||)3.081 E F0 .582(list e)3.082 F .582
+(xcept the command follo)-.15 F(wing)-.25 E .918(the \214nal)184 328.8 R
+F1(&&)3.418 E F0(or)3.418 E F1(||)3.418 E F0 3.418(,a)C 1.218 -.15(ny c)
+-3.418 H .918(ommand in a pipeline b).15 F .917
+(ut the last, or if the command')-.2 F 3.417(sr)-.55 G(eturn)-3.417 E
+-.25(va)184 340.8 S .66(lue is being in).25 F -.15(ve)-.4 G .66
+(rted with).15 F F1(!)3.16 E F0 5.661(.I)C 3.161(fac)-5.661 G .661
+(ompound command other than a subshell returns a)-3.161 F 1.113
+(non-zero status because a command f)184 352.8 R 1.112(ailed while)-.1 F
+F1<ad65>3.612 E F0 -.1(wa)3.612 G 3.612(sb).1 G 1.112
+(eing ignored, the shell does)-3.612 F .177(not e)184 364.8 R 2.677
+(xit. A)-.15 F .177(trap on)2.677 F F1(ERR)2.677 E F0 2.677(,i)C 2.678
+(fs)-2.677 G .178(et, is e)-2.678 F -.15(xe)-.15 G .178
+(cuted before the shell e).15 F 2.678(xits. This)-.15 F .178
+(option applies to)2.678 F .618(the shell en)184 376.8 R .617
+(vironment and each subshell en)-.4 F .617(vironment separately \(see)
+-.4 F F3 .617(COMMAND EXE-)3.117 F .642(CUTION ENVIR)184 388.8 R(ONMENT)
+-.27 E F0(abo)2.893 E -.15(ve)-.15 G .643
+(\), and may cause subshells to e).15 F .643(xit before e)-.15 F -.15
+(xe)-.15 G .643(cuting all).15 F(the commands in the subshell.)184 400.8
+Q .999(If a compound command or shell function e)184 418.8 R -.15(xe)
+-.15 G .999(cutes in a conte).15 F .998(xt where)-.15 F F1<ad65>3.498 E
+F0 .998(is being ig-)3.498 F .089(nored, none of the commands e)184
+430.8 R -.15(xe)-.15 G .089
+(cuted within the compound command or function body).15 F .503
+(will be af)184 442.8 R .503(fected by the)-.25 F F1<ad65>3.002 E F0
+.502(setting, e)3.002 F -.15(ve)-.25 G 3.002(ni).15 G(f)-3.002 E F1
+<ad65>3.002 E F0 .502(is set and a command returns a f)3.002 F .502
+(ailure sta-)-.1 F 4.183(tus. If)184 454.8 R 4.183(ac)4.183 G 1.683
+(ompound command or shell function sets)-4.183 F F1<ad65>4.184 E F0
+1.684(while e)4.184 F -.15(xe)-.15 G 1.684(cuting in a conte).15 F(xt)
+-.15 E(where)184 466.8 Q F1<ad65>3.154 E F0 .654
+(is ignored, that setting will not ha)3.154 F .953 -.15(ve a)-.2 H .953
+-.15(ny e).15 H -.25(ff).15 G .653(ect until the compound command).25 F
+(or the command containing the function call completes.)184 478.8 Q F1
+<ad66>144 490.8 Q F0(Disable pathname e)184 490.8 Q(xpansion.)-.15 E F1
+<ad68>144 502.8 Q F0 .988(Remember the location of commands as the)184
+502.8 R 3.488(ya)-.15 G .988(re look)-3.488 F .988(ed up for e)-.1 F
+-.15(xe)-.15 G 3.488(cution. This).15 F .988(is en-)3.488 F
+(abled by def)184 514.8 Q(ault.)-.1 E F1<ad6b>144 526.8 Q F0 .514
+(All ar)184 526.8 R .514
+(guments in the form of assignment statements are placed in the en)-.18
+F .513(vironment for a)-.4 F
+(command, not just those that precede the command name.)184 538.8 Q F1
+<ad6d>144 550.8 Q F0 .148(Monitor mode.)184 550.8 R .148
+(Job control is enabled.)5.148 F .149(This option is on by def)5.148 F
+.149(ault for interacti)-.1 F .449 -.15(ve s)-.25 H(hells).15 E .651
+(on systems that support it \(see)184 562.8 R F3 .651(JOB CONTR)3.151 F
+(OL)-.27 E F0(abo)2.901 E -.15(ve)-.15 G 3.151(\). All).15 F .65
+(processes run in a separate)3.151 F .678(process group.)184 574.8 R
+.679(When a background job completes, the shell prints a line containin\
+g its)5.678 F -.15(ex)184 586.8 S(it status.).15 E F1<ad6e>144 598.8 Q
+F0 .653(Read commands b)184 598.8 R .653(ut do not e)-.2 F -.15(xe)-.15
+G .653(cute them.).15 F .652
+(This may be used to check a shell script for)5.653 F(syntax errors.)184
+610.8 Q(This is ignored by interacti)5 E .3 -.15(ve s)-.25 H(hells.).15
+E F1<ad6f>144 622.8 Q F2(option\255name)2.5 E F0(The)184 634.8 Q F2
+(option\255name)2.5 E F0(can be one of the follo)2.5 E(wing:)-.25 E F1
+(allexport)184 646.8 Q F0(Same as)224 658.8 Q F1<ad61>2.5 E F0(.)A F1
+(braceexpand)184 670.8 Q F0(Same as)224 682.8 Q F1<ad42>2.5 E F0(.)A F1
+(emacs)184 694.8 Q F0 .089
+(Use an emacs-style command line editing interf)224 694.8 R 2.589
+(ace. This)-.1 F .089(is enabled by def)2.589 F(ault)-.1 E .95
+(when the shell is interacti)224 706.8 R -.15(ve)-.25 G 3.45(,u).15 G
+.95(nless the shell is started with the)-3.45 F F1(\255\255noediting)
+3.45 E F0 2.5(option. This)224 718.8 R(also af)2.5 E
+(fects the editing interf)-.25 E(ace used for)-.1 E F1 -.18(re)2.5 G
+(ad \255e).18 E F0(.)A(GNU Bash 5.0)72 768 Q(2004 Apr 20)149.565 E(15)
+198.725 E 0 Cg EP
+%%Page: 16 16
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S(SH_B).35 E(UIL)-.1 E 87.61
+(TINS\(1\) General)-.92 F(Commands Manual)2.5 E -.35(BA)90.11 G(SH_B).35
+E(UIL)-.1 E(TINS\(1\))-.92 E/F1 10/Times-Bold@0 SF(err)184 84 Q(exit)
+-.18 E F0(Same as)224 84 Q F1<ad65>2.5 E F0(.)A F1(errtrace)184 96 Q F0
+(Same as)224 96 Q F1<ad45>2.5 E F0(.)A F1(functrace)184 108 Q F0
+(Same as)224 120 Q F1<ad54>2.5 E F0(.)A F1(hashall)184 132 Q F0(Same as)
+224 132 Q F1<ad68>2.5 E F0(.)A F1(histexpand)184 144 Q F0(Same as)224
+156 Q F1<ad48>2.5 E F0(.)A F1(history)184 168 Q F0 .586
+(Enable command history)224 168 R 3.087(,a)-.65 G 3.087(sd)-3.087 G .587
+(escribed abo)-3.087 F .887 -.15(ve u)-.15 H(nder).15 E/F2 9
+/Times-Bold@0 SF(HIST)3.087 E(OR)-.162 E(Y)-.315 E/F3 9/Times-Roman@0 SF
+(.)A F0 .587(This option is)5.087 F(on by def)224 180 Q
+(ault in interacti)-.1 E .3 -.15(ve s)-.25 H(hells.).15 E F1(ignor)184
+192 Q(eeof)-.18 E F0 1.657(The ef)224 204 R 1.657
+(fect is as if the shell command)-.25 F/F4 10/Courier@0 SF(IGNOREEOF=10)
+4.156 E F0 1.656(had been e)4.156 F -.15(xe)-.15 G(cuted).15 E(\(see)224
+216 Q F1(Shell V)2.5 E(ariables)-.92 E F0(abo)2.5 E -.15(ve)-.15 G(\).)
+.15 E F1 -.1(ke)184 228 S(yw).1 E(ord)-.1 E F0(Same as)224 240 Q F1
+<ad6b>2.5 E F0(.)A F1(monitor)184 252 Q F0(Same as)224 252 Q F1<ad6d>2.5
+E F0(.)A F1(noclob)184 264 Q(ber)-.1 E F0(Same as)224 276 Q F1<ad43>2.5
+E F0(.)A F1(noexec)184 288 Q F0(Same as)224 288 Q F1<ad6e>2.5 E F0(.)A
+F1(noglob)184 300 Q F0(Same as)224 300 Q F1<ad66>2.5 E F0(.)A F1(nolog)
+184 312 Q F0(Currently ignored.)224 312 Q F1(notify)184 324 Q F0
+(Same as)224 324 Q F1<ad62>2.5 E F0(.)A F1(nounset)184 336 Q F0(Same as)
+224 336 Q F1<ad75>2.5 E F0(.)A F1(onecmd)184 348 Q F0(Same as)224 348 Q
+F1<ad74>2.5 E F0(.)A F1(ph)184 360 Q(ysical)-.15 E F0(Same as)224 360 Q
+F1<ad50>2.5 E F0(.)A F1(pipefail)184 372 Q F0 1.029
+(If set, the return v)224 372 R 1.029(alue of a pipeline is the v)-.25 F
+1.03(alue of the last \(rightmost\) com-)-.25 F 1.137(mand to e)224 384
+R 1.136
+(xit with a non-zero status, or zero if all commands in the pipeline)
+-.15 F -.15(ex)224 396 S(it successfully).15 E 5(.T)-.65 G
+(his option is disabled by def)-5 E(ault.)-.1 E F1(posix)184 408 Q F0
+2.09(Change the beha)224 408 R 2.091(vior of)-.2 F F1(bash)4.591 E F0
+2.091(where the def)4.591 F 2.091(ault operation dif)-.1 F 2.091
+(fers from the)-.25 F 1.212(POSIX standard to match the standard \()224
+420 R/F5 10/Times-Italic@0 SF 1.212(posix mode)B F0 3.712(\). See)B F2
+1.212(SEE ALSO)3.712 F F0(belo)3.462 E(w)-.25 E .954
+(for a reference to a document that details ho)224 432 R 3.455(wp)-.25 G
+.955(osix mode af)-3.455 F .955(fects bash')-.25 F 3.455(sb)-.55 G(e-)
+-3.455 E(ha)224 444 Q(vior)-.2 E(.)-.55 E F1(pri)184 456 Q(vileged)-.1 E
+F0(Same as)224 468 Q F1<ad70>2.5 E F0(.)A F1 -.1(ve)184 480 S(rbose).1 E
+F0(Same as)224 480 Q F1<ad76>2.5 E F0(.)A F1(vi)184 492 Q F0 .209
+(Use a vi-style command line editing interf)224 492 R 2.709(ace. This)
+-.1 F .209(also af)2.709 F .209(fects the editing in-)-.25 F(terf)224
+504 Q(ace used for)-.1 E F1 -.18(re)2.5 G(ad \255e).18 E F0(.)A F1
+(xtrace)184 516 Q F0(Same as)224 516 Q F1<ad78>2.5 E F0(.)A(If)184 534 Q
+F1<ad6f>3.052 E F0 .552(is supplied with no)3.052 F F5(option\255name)
+3.053 E F0 3.053(,t)C .553(he v)-3.053 F .553
+(alues of the current options are printed.)-.25 F(If)5.553 E F1(+o)184
+546 Q F0 1.072(is supplied with no)3.572 F F5(option\255name)3.572 E F0
+3.572(,a)C 1.071(series of)-.001 F F1(set)3.571 E F0 1.071
+(commands to recreate the current)3.571 F
+(option settings is displayed on the standard output.)184 558 Q F1<ad70>
+144 570 Q F0 -.45(Tu)184 570 S 1.071(rn on).45 F F5(privile)4.821 E -.1
+(ge)-.4 G(d).1 E F0 3.572(mode. In)4.341 F 1.072(this mode, the)3.572 F
+F2($ENV)3.572 E F0(and)3.322 E F2($B)3.572 E(ASH_ENV)-.27 E F0 1.072
+(\214les are not pro-)3.322 F 1.501
+(cessed, shell functions are not inherited from the en)184 582 R 1.5
+(vironment, and the)-.4 F F2(SHELLOPTS)4 E F3(,)A F2 -.27(BA)184 594 S
+(SHOPTS).27 E F3(,)A F2(CDP)2.774 E -.855(AT)-.666 G(H).855 E F3(,)A F0
+(and)2.774 E F2(GLOBIGNORE)3.024 E F0 -.25(va)2.774 G .524
+(riables, if the).25 F 3.025(ya)-.15 G .525(ppear in the en)-3.025 F
+(vironment,)-.4 E .38(are ignored.)184 606 R .38
+(If the shell is started with the ef)5.38 F(fecti)-.25 E .679 -.15(ve u)
+-.25 H .379(ser \(group\) id not equal to the real).15 F .461
+(user \(group\) id, and the)184 618 R F1<ad70>2.961 E F0 .461
+(option is not supplied, these actions are tak)2.961 F .462
+(en and the ef)-.1 F(fec-)-.25 E(ti)184 630 Q .695 -.15(ve u)-.25 H .395
+(ser id is set to the real user id.).15 F .395(If the)5.395 F F1<ad70>
+2.895 E F0 .394(option is supplied at startup, the ef)2.895 F(fecti)-.25
+E -.15(ve)-.25 G .386(user id is not reset.)184 642 R -.45(Tu)5.386 G
+.386(rning this option of).45 F 2.886(fc)-.25 G .387(auses the ef)-2.886
+F(fecti)-.25 E .687 -.15(ve u)-.25 H .387(ser and group ids to be).15 F
+(set to the real user and group ids.)184 654 Q F1<ad74>144 666 Q F0
+(Exit after reading and e)184 666 Q -.15(xe)-.15 G(cuting one command.)
+.15 E F1<ad75>144 678 Q F0 -.35(Tr)184 678 S .044(eat unset v).35 F .044
+(ariables and parameters other than the special parameters "@" and "*" \
+as an)-.25 F .182(error when performing parameter e)184 690 R 2.682
+(xpansion. If)-.15 F -.15(ex)2.682 G .183
+(pansion is attempted on an unset v).15 F(ari-)-.25 E .746
+(able or parameter)184 702 R 3.246(,t)-.4 G .746
+(he shell prints an error message, and, if not interacti)-3.246 F -.15
+(ve)-.25 G 3.246(,e).15 G .746(xits with a)-3.396 F(non-zero status.)184
+714 Q(GNU Bash 5.0)72 768 Q(2004 Apr 20)149.565 E(16)198.725 E 0 Cg EP
+%%Page: 17 17
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S(SH_B).35 E(UIL)-.1 E 87.61
+(TINS\(1\) General)-.92 F(Commands Manual)2.5 E -.35(BA)90.11 G(SH_B).35
+E(UIL)-.1 E(TINS\(1\))-.92 E/F1 10/Times-Bold@0 SF<ad76>144 84 Q F0
+(Print shell input lines as the)184 84 Q 2.5(ya)-.15 G(re read.)-2.5 E
+F1<ad78>144 96 Q F0 .315(After e)184 96 R .315(xpanding each)-.15 F/F2
+10/Times-Italic@0 SF .315(simple command)2.815 F F0(,)A F1 -.25(fo)2.815
+G(r).25 E F0(command,)2.815 E F1(case)2.815 E F0(command,)2.815 E F1
+(select)2.815 E F0(command,)2.815 E 1.236(or arithmetic)184 108 R F1
+-.25(fo)3.736 G(r).25 E F0 1.236(command, display the e)3.736 F 1.236
+(xpanded v)-.15 F 1.236(alue of)-.25 F/F3 9/Times-Bold@0 SF(PS4)3.736 E
+/F4 9/Times-Roman@0 SF(,)A F0(follo)3.486 E 1.236(wed by the com-)-.25 F
+(mand and its e)184 120 Q(xpanded ar)-.15 E(guments or associated w)-.18
+E(ord list.)-.1 E F1<ad42>144 132 Q F0 1.205(The shell performs brace e)
+184 132 R 1.205(xpansion \(see)-.15 F F1 1.205(Brace Expansion)3.705 F
+F0(abo)3.705 E -.15(ve)-.15 G 3.706(\). This).15 F 1.206(is on by de-)
+3.706 F -.1(fa)184 144 S(ult.).1 E F1<ad43>144 156 Q F0 .214(If set,)184
+156 R F1(bash)2.714 E F0 .214(does not o)2.714 F -.15(ve)-.15 G .214
+(rwrite an e).15 F .214(xisting \214le with the)-.15 F F1(>)2.714 E F0
+(,)A F1(>&)2.714 E F0 2.713(,a)C(nd)-2.713 E F1(<>)2.713 E F0 .213
+(redirection opera-)2.713 F 3.053(tors. This)184 168 R .553(may be o)
+3.053 F -.15(ve)-.15 G .553
+(rridden when creating output \214les by using the redirection opera-)
+.15 F(tor)184 180 Q F1(>|)2.5 E F0(instead of)2.5 E F1(>)2.5 E F0(.)A F1
+<ad45>144 192 Q F0 .104(If set, an)184 192 R 2.604(yt)-.15 G .104
+(rap on)-2.604 F F1(ERR)2.604 E F0 .103
+(is inherited by shell functions, command substitutions, and com-)2.604
+F .838(mands e)184 204 R -.15(xe)-.15 G .838(cuted in a subshell en).15
+F 3.338(vironment. The)-.4 F F1(ERR)3.338 E F0 .839
+(trap is normally not inherited in)3.339 F(such cases.)184 216 Q F1
+<ad48>144 228 Q F0(Enable)184 228 Q F1(!)3.032 E F0 .532
+(style history substitution.)5.532 F .531(This option is on by def)5.532
+F .531(ault when the shell is inter)-.1 F(-)-.2 E(acti)184 240 Q -.15
+(ve)-.25 G(.).15 E F1<ad50>144 252 Q F0 .959
+(If set, the shell does not resolv)184 252 R 3.459(es)-.15 G .959
+(ymbolic links when e)-3.459 F -.15(xe)-.15 G .96
+(cuting commands such as).15 F F1(cd)3.46 E F0 1.453
+(that change the current w)184 264 R 1.453(orking directory)-.1 F 6.453
+(.I)-.65 G 3.952(tu)-6.453 G 1.452(ses the ph)-3.952 F 1.452
+(ysical directory structure in-)-.05 F 3.334(stead. By)184 276 R(def)
+3.334 E(ault,)-.1 E F1(bash)3.334 E F0(follo)3.334 E .834
+(ws the logical chain of directories when performing com-)-.25 F
+(mands which change the current directory)184 288 Q(.)-.65 E F1<ad54>144
+300 Q F0 .89(If set, an)184 300 R 3.39(yt)-.15 G .89(raps on)-3.39 F F1
+(DEB)3.39 E(UG)-.1 E F0(and)3.39 E F1(RETURN)3.39 E F0 .89
+(are inherited by shell functions, command)3.39 F 1.932
+(substitutions, and commands e)184 312 R -.15(xe)-.15 G 1.932
+(cuted in a subshell en).15 F 4.432(vironment. The)-.4 F F1(DEB)4.432 E
+(UG)-.1 E F0(and)4.432 E F1(RETURN)184 324 Q F0
+(traps are normally not inherited in such cases.)2.5 E F1<adad>144 336 Q
+F0 .401(If no ar)184 336 R .401(guments follo)-.18 F 2.901(wt)-.25 G
+.401(his option, then the positional parameters are unset.)-2.901 F
+(Otherwise,)5.4 E(the positional parameters are set to the)184 348 Q F2
+(ar)2.5 E(g)-.37 E F0(s, e)A -.15(ve)-.25 G 2.5(ni).15 G 2.5(fs)-2.5 G
+(ome of them be)-2.5 E(gin with a)-.15 E F1<ad>2.5 E F0(.)A F1<ad>144
+360 Q F0 .796(Signal the end of options, cause all remaining)184 360 R
+F2(ar)3.297 E(g)-.37 E F0 3.297(st)C 3.297(ob)-3.297 G 3.297(ea)-3.297 G
+.797(ssigned to the positional pa-)-3.297 F 3.022(rameters. The)184 372
+R F1<ad78>3.022 E F0(and)3.022 E F1<ad76>3.022 E F0 .522
+(options are turned of)3.022 F 3.022(f. If)-.25 F .522(there are no)
+3.022 F F2(ar)3.022 E(g)-.37 E F0 .521(s, the positional pa-)B
+(rameters remain unchanged.)184 384 Q .425(The options are of)144 400.8
+R 2.925(fb)-.25 G 2.925(yd)-2.925 G(ef)-2.925 E .425
+(ault unless otherwise noted.)-.1 F .425
+(Using + rather than \255 causes these options)5.425 F .178
+(to be turned of)144 412.8 R 2.678(f. The)-.25 F .178
+(options can also be speci\214ed as ar)2.678 F .178(guments to an in)
+-.18 F -.2(vo)-.4 G .177(cation of the shell.).2 F(The)5.177 E .066
+(current set of options may be found in)144 424.8 R F1<24ad>2.566 E F0
+5.066(.T)C .066(he return status is al)-5.066 F -.1(wa)-.1 G .066
+(ys true unless an in).1 F -.25(va)-.4 G .067(lid option).25 F
+(is encountered.)144 436.8 Q F1(shift)108 453.6 Q F0([)2.5 E F2(n)A F0
+(])A .429(The positional parameters from)144 465.6 R F2(n)2.929 E F0
+.429(+1 ... are renamed to)B F1 .429($1 ....)2.929 F F0 -.15(Pa)5.428 G
+.428(rameters represented by the num-).15 F(bers)144 477.6 Q F1($#)2.582
+E F0(do)2.582 E .082(wn to)-.25 F F1($#)2.582 E F0<ad>A F2(n)A F0 .082
+(+1 are unset.)B F2(n)5.442 E F0 .082(must be a non-ne)2.822 F -.05(ga)
+-.15 G(ti).05 E .383 -.15(ve n)-.25 H .083(umber less than or equal to)
+.15 F F1($#)2.583 E F0 5.083(.I)C(f)-5.083 E F2(n)2.943 E F0 .06
+(is 0, no parameters are changed.)144 489.6 R(If)5.06 E F2(n)2.92 E F0
+.06(is not gi)2.8 F -.15(ve)-.25 G .06(n, it is assumed to be 1.).15 F
+(If)5.06 E F2(n)2.92 E F0 .06(is greater than)2.8 F F1($#)2.56 E F0 2.56
+(,t)C(he)-2.56 E .143(positional parameters are not changed.)144 501.6 R
+.144(The return status is greater than zero if)5.143 F F2(n)3.004 E F0
+.144(is greater than)2.884 F F1($#)2.644 E F0
+(or less than zero; otherwise 0.)144 513.6 Q F1(shopt)108 530.4 Q F0([)
+2.5 E F1(\255pqsu)A F0 2.5(][)C F1<ad6f>-2.5 E F0 2.5(][)C F2(optname)
+-2.5 E F0(...])2.5 E -.8(To)144 542.4 S .64(ggle the v).8 F .639
+(alues of settings controlling optional shell beha)-.25 F(vior)-.2 E
+5.639(.T)-.55 G .639(he settings can be either those)-5.639 F .374
+(listed belo)144 554.4 R 1.674 -.65(w, o)-.25 H 1.174 -.4(r, i).65 H
+2.874(ft).4 G(he)-2.874 E F1<ad6f>2.874 E F0 .375
+(option is used, those a)2.875 F -.25(va)-.2 G .375(ilable with the).25
+F F1<ad6f>2.875 E F0 .375(option to the)2.875 F F1(set)2.875 E F0 -.2
+(bu)2.875 G .375(iltin com-).2 F 2.566(mand. W)144 566.4 R .066
+(ith no options, or with the)-.4 F F1<ad70>2.566 E F0 .066
+(option, a list of all settable options is displayed, with an in-)2.566
+F .074(dication of whether or not each is set; if)144 578.4 R F2
+(optnames)2.574 E F0 .074
+(are supplied, the output is restricted to those op-)2.574 F 3.105
+(tions. The)144 590.4 R F1<ad70>3.105 E F0 .605(option causes output to\
+ be displayed in a form that may be reused as input.)3.105 F(Other)5.605
+E(options ha)144 602.4 Q .3 -.15(ve t)-.2 H(he follo).15 E
+(wing meanings:)-.25 E F1<ad73>144 614.4 Q F0(Enable \(set\) each)180
+614.4 Q F2(optname)2.5 E F0(.)A F1<ad75>144 626.4 Q F0
+(Disable \(unset\) each)180 626.4 Q F2(optname)2.5 E F0(.)A F1<ad71>144
+638.4 Q F0 .003(Suppresses normal output \(quiet mode\); the return sta\
+tus indicates whether the)180 638.4 R F2(optname)2.504 E F0(is)2.504 E
+.256(set or unset.)180 650.4 R .256(If multiple)5.256 F F2(optname)2.756
+E F0(ar)2.756 E .256(guments are gi)-.18 F -.15(ve)-.25 G 2.756(nw).15 G
+(ith)-2.756 E F1<ad71>2.756 E F0 2.755(,t)C .255
+(he return status is zero if)-2.755 F(all)180 662.4 Q F2(optnames)2.5 E
+F0(are enabled; non-zero otherwise.)2.5 E F1<ad6f>144 674.4 Q F0
+(Restricts the v)180 674.4 Q(alues of)-.25 E F2(optname)2.5 E F0
+(to be those de\214ned for the)2.5 E F1<ad6f>2.5 E F0(option to the)2.5
+E F1(set)2.5 E F0 -.2(bu)2.5 G(iltin.).2 E .624(If either)144 691.2 R F1
+<ad73>3.124 E F0(or)3.124 E F1<ad75>3.124 E F0 .624(is used with no)
+3.124 F F2(optname)3.124 E F0(ar)3.124 E(guments,)-.18 E F1(shopt)3.124
+E F0(sho)3.124 E .624(ws only those options which are)-.25 F .984
+(set or unset, respecti)144 703.2 R -.15(ve)-.25 G(ly).15 E 5.984(.U)
+-.65 G .984(nless otherwise noted, the)-5.984 F F1(shopt)3.484 E F0 .983
+(options are disabled \(unset\) by de-)3.483 F -.1(fa)144 715.2 S(ult.)
+.1 E(GNU Bash 5.0)72 768 Q(2004 Apr 20)149.565 E(17)198.725 E 0 Cg EP
+%%Page: 18 18
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S(SH_B).35 E(UIL)-.1 E 87.61
+(TINS\(1\) General)-.92 F(Commands Manual)2.5 E -.35(BA)90.11 G(SH_B).35
+E(UIL)-.1 E(TINS\(1\))-.92 E 1.544
+(The return status when listing options is zero if all)144 84 R/F1 10
+/Times-Italic@0 SF(optnames)4.044 E F0 1.545
+(are enabled, non-zero otherwise.)4.045 F .696
+(When setting or unsetting options, the return status is zero unless an)
+144 96 R F1(optname)3.196 E F0 .696(is not a v)3.196 F .695(alid shell)
+-.25 F(option.)144 108 Q(The list of)144 124.8 Q/F2 10/Times-Bold@0 SF
+(shopt)2.5 E F0(options is:)2.5 E F2(assoc_expand_once)144 142.8 Q F0
+1.944(If set, the shell suppresses multiple e)184 154.8 R -.25(va)-.25 G
+1.945(luation of associati).25 F 2.245 -.15(ve a)-.25 H 1.945
+(rray subscripts during).15 F .885(arithmetic e)184 166.8 R .885
+(xpression e)-.15 F -.25(va)-.25 G .885(luation, while e).25 F -.15(xe)
+-.15 G .885(cuting b).15 F .885(uiltins that can perform v)-.2 F .885
+(ariable as-)-.25 F(signments, and while e)184 178.8 Q -.15(xe)-.15 G
+(cuting b).15 E(uiltins that perform array dereferencing.)-.2 E F2
+(autocd)144 190.8 Q F0 .199
+(If set, a command name that is the name of a directory is e)184 190.8 R
+-.15(xe)-.15 G .2(cuted as if it were the ar).15 F(gu-)-.18 E
+(ment to the)184 202.8 Q F2(cd)2.5 E F0 2.5(command. This)2.5 F
+(option is only used by interacti)2.5 E .3 -.15(ve s)-.25 H(hells.).15 E
+F2(cdable_v)144 214.8 Q(ars)-.1 E F0 .156(If set, an ar)184 226.8 R .156
+(gument to the)-.18 F F2(cd)2.656 E F0 -.2(bu)2.656 G .155
+(iltin command that is not a directory is assumed to be the).2 F
+(name of a v)184 238.8 Q(ariable whose v)-.25 E
+(alue is the directory to change to.)-.25 E F2(cdspell)144 250.8 Q F0
+1.055
+(If set, minor errors in the spelling of a directory component in a)184
+250.8 R F2(cd)3.555 E F0 1.055(command will be)3.555 F 3.988
+(corrected. The)184 262.8 R 1.488(errors check)3.988 F 1.487
+(ed for are transposed characters, a missing character)-.1 F 3.987(,a)
+-.4 G(nd)-3.987 E .77(one character too man)184 274.8 R 4.57 -.65(y. I)
+-.15 H 3.27(fac).65 G .77
+(orrection is found, the corrected \214lename is printed, and)-3.27 F
+(the command proceeds.)184 286.8 Q
+(This option is only used by interacti)5 E .3 -.15(ve s)-.25 H(hells.)
+.15 E F2(checkhash)144 298.8 Q F0 .737(If set,)184 310.8 R F2(bash)3.237
+E F0 .736(checks that a command found in the hash table e)3.237 F .736
+(xists before trying to e)-.15 F -.15(xe)-.15 G(-).15 E(cute it.)184
+322.8 Q(If a hashed command no longer e)5 E
+(xists, a normal path search is performed.)-.15 E F2(checkjobs)144 334.8
+Q F0 .448(If set,)184 346.8 R F2(bash)2.948 E F0 .448
+(lists the status of an)2.948 F 2.949(ys)-.15 G .449
+(topped and running jobs before e)-2.949 F .449(xiting an interacti)-.15
+F -.15(ve)-.25 G 2.662(shell. If)184 358.8 R(an)2.662 E 2.661(yj)-.15 G
+.161(obs are running, this causes the e)-2.661 F .161
+(xit to be deferred until a second e)-.15 F .161(xit is at-)-.15 F 1.472
+(tempted without an interv)184 370.8 R 1.473(ening command \(see)-.15 F
+/F3 9/Times-Bold@0 SF 1.473(JOB CONTR)3.973 F(OL)-.27 E F0(abo)3.723 E
+-.15(ve)-.15 G 3.973(\). The).15 F 1.473(shell al-)3.973 F -.1(wa)184
+382.8 S(ys postpones e).1 E(xiting if an)-.15 E 2.5(yj)-.15 G
+(obs are stopped.)-2.5 E F2(checkwinsize)144 394.8 Q F0 1.09(If set,)184
+406.8 R F2(bash)3.59 E F0 1.09(checks the windo)3.59 F 3.59(ws)-.25 G
+1.09(ize after each e)-3.59 F 1.09(xternal \(non-b)-.15 F 1.09
+(uiltin\) command and, if)-.2 F(necessary)184 418.8 Q 3.35(,u)-.65 G .85
+(pdates the v)-3.35 F .85(alues of)-.25 F F3(LINES)3.35 E F0(and)3.1 E
+F3(COLUMNS)3.35 E/F4 9/Times-Roman@0 SF(.)A F0 .85
+(This option is enabled by de-)5.35 F -.1(fa)184 430.8 S(ult.).1 E F2
+(cmdhist)144 442.8 Q F0 .173(If set,)184 442.8 R F2(bash)2.673 E F0 .173
+(attempts to sa)2.673 F .473 -.15(ve a)-.2 H .172
+(ll lines of a multiple-line command in the same history en-).15 F(try)
+184 454.8 Q 5.596(.T)-.65 G .597(his allo)-5.596 F .597
+(ws easy re-editing of multi-line commands.)-.25 F .597
+(This option is enabled by de-)5.597 F -.1(fa)184 466.8 S 1.288(ult, b)
+.1 F 1.288(ut only has an ef)-.2 F 1.288
+(fect if command history is enabled, as described abo)-.25 F 1.587 -.15
+(ve u)-.15 H(nder).15 E F3(HIST)184 478.8 Q(OR)-.162 E(Y)-.315 E F4(.)A
+F2(compat31)144 490.8 Q(compat32)144 502.8 Q(compat40)144 514.8 Q
+(compat41)144 526.8 Q(compat42)144 538.8 Q(compat43)144 550.8 Q
+(compat44)144 562.8 Q F0 .889(These control aspects of the shell')184
+574.8 R 3.389(sc)-.55 G .889(ompatibility mode \(see)-3.389 F F3 .889
+(SHELL COMP)3.389 F -.855(AT)-.666 G(IBILITY).855 E(MODE)184 586.8 Q F0
+(belo)2.25 E(w\).)-.25 E F2(complete_fullquote)144 603.6 Q F0 .654
+(If set,)184 615.6 R F2(bash)3.153 E F0 .653(quotes all shell metachara\
+cters in \214lenames and directory names when per)3.153 F(-)-.2 E 1.524
+(forming completion.)184 627.6 R 1.524(If not set,)6.524 F F2(bash)4.024
+E F0(remo)4.024 E -.15(ve)-.15 G 4.024(sm).15 G 1.524
+(etacharacters such as the dollar sign)-4.024 F 2.667(from the set of c\
+haracters that will be quoted in completed \214lenames when these)184
+639.6 R .028(metacharacters appear in shell v)184 651.6 R .028
+(ariable references in w)-.25 F .029(ords to be completed.)-.1 F .029
+(This means)5.029 F 1.073(that dollar signs in v)184 663.6 R 1.073
+(ariable names that e)-.25 F 1.073
+(xpand to directories will not be quoted; ho)-.15 F(w-)-.25 E -2.15 -.25
+(ev e)184 675.6 T 1.922 -.4(r, a).25 H 1.422 -.15(ny d).4 H 1.123
+(ollar signs appearing in \214lenames will not be quoted, either).15 F
+6.123(.T)-.55 G 1.123(his is acti)-6.123 F -.15(ve)-.25 G .59
+(only when bash is using backslashes to quote completed \214lenames.)184
+687.6 R .59(This v)5.59 F .59(ariable is set)-.25 F(by def)184 699.6 Q
+(ault, which is the def)-.1 E(ault bash beha)-.1 E(vior in v)-.2 E
+(ersions through 4.2.)-.15 E(GNU Bash 5.0)72 768 Q(2004 Apr 20)149.565 E
+(18)198.725 E 0 Cg EP
+%%Page: 19 19
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S(SH_B).35 E(UIL)-.1 E 87.61
+(TINS\(1\) General)-.92 F(Commands Manual)2.5 E -.35(BA)90.11 G(SH_B).35
+E(UIL)-.1 E(TINS\(1\))-.92 E/F1 10/Times-Bold@0 SF(dir)144 84 Q(expand)
+-.18 E F0 .486(If set,)184 96 R F1(bash)2.986 E F0 .486
+(replaces directory names with the results of w)2.986 F .486(ord e)-.1 F
+.487(xpansion when perform-)-.15 F .18(ing \214lename completion.)184
+108 R .179(This changes the contents of the readline editing b)5.18 F
+(uf)-.2 E(fer)-.25 E 5.179(.I)-.55 G 2.679(fn)-5.179 G(ot)-2.679 E(set,)
+184 120 Q F1(bash)2.5 E F0(attempts to preserv)2.5 E 2.5(ew)-.15 G
+(hat the user typed.)-2.5 E F1(dirspell)144 136.8 Q F0 .858(If set,)184
+136.8 R F1(bash)3.358 E F0 .858
+(attempts spelling correction on directory names during w)3.358 F .859
+(ord completion if)-.1 F
+(the directory name initially supplied does not e)184 148.8 Q(xist.)-.15
+E F1(dotglob)144 165.6 Q F0 .165(If set,)184 165.6 R F1(bash)2.665 E F0
+.165(includes \214lenames be)2.665 F .165(ginning with a `.)-.15 F 2.665
+('i)-.7 G 2.665(nt)-2.665 G .165(he results of pathname e)-2.665 F
+(xpansion.)-.15 E(The \214lenames)184 177.6 Q F1 -.63(``)2.5 G -.55(.')
+.63 G(')-.08 E F0(and)5 E F1 -.63(``)2.5 G(..).63 E -.63('')-.55 G F0
+(must al)5.63 E -.1(wa)-.1 G(ys be matched e).1 E(xplicitly)-.15 E 2.5
+(,e)-.65 G -.15(ve)-2.75 G 2.5(ni).15 G(f)-2.5 E F1(dotglob)2.5 E F0
+(is set.)2.5 E F1(execfail)144 194.4 Q F0 .516(If set, a non-interacti)
+184 194.4 R .816 -.15(ve s)-.25 H .516(hell will not e).15 F .516
+(xit if it cannot e)-.15 F -.15(xe)-.15 G .517
+(cute the \214le speci\214ed as an ar).15 F(-)-.2 E(gument to the)184
+206.4 Q F1(exec)2.5 E F0 -.2(bu)2.5 G(iltin command.).2 E(An interacti)5
+E .3 -.15(ve s)-.25 H(hell does not e).15 E(xit if)-.15 E F1(exec)2.5 E
+F0 -.1(fa)2.5 G(ils.).1 E F1(expand_aliases)144 223.2 Q F0 .717
+(If set, aliases are e)184 235.2 R .717(xpanded as described abo)-.15 F
+1.017 -.15(ve u)-.15 H(nder).15 E/F2 9/Times-Bold@0 SF(ALIASES)3.217 E
+/F3 9/Times-Roman@0 SF(.)A F0 .716(This option is enabled)5.217 F
+(by def)184 247.2 Q(ault for interacti)-.1 E .3 -.15(ve s)-.25 H(hells.)
+.15 E F1(extdeb)144 264 Q(ug)-.2 E F0 .17(If set at shell in)184 276 R
+-.2(vo)-.4 G .17(cation, or in a shell startup \214le, arrange to e).2 F
+-.15(xe)-.15 G .17(cute the deb).15 F .17(ugger pro\214le)-.2 F 1.082
+(before the shell starts, identical to the)184 288 R F1<adad646562>3.582
+E(ugger)-.2 E F0 3.581(option. If)3.581 F 1.081(set after in)3.581 F -.2
+(vo)-.4 G 1.081(cation, be-).2 F(ha)184 300 Q
+(vior intended for use by deb)-.2 E(uggers is enabled:)-.2 E F1(1.)184
+316.8 Q F0(The)220 316.8 Q F1<ad46>4.25 E F0 1.75(option to the)4.25 F
+F1(declar)4.251 E(e)-.18 E F0 -.2(bu)4.251 G 1.751
+(iltin displays the source \214le name and line).2 F
+(number corresponding to each function name supplied as an ar)220 328.8
+Q(gument.)-.18 E F1(2.)184 345.6 Q F0 1.667(If the command run by the)
+220 345.6 R F1(DEB)4.167 E(UG)-.1 E F0 1.667(trap returns a non-zero v)
+4.167 F 1.667(alue, the ne)-.25 F(xt)-.15 E
+(command is skipped and not e)220 357.6 Q -.15(xe)-.15 G(cuted.).15 E F1
+(3.)184 374.4 Q F0 .84(If the command run by the)220 374.4 R F1(DEB)3.34
+E(UG)-.1 E F0 .841(trap returns a v)3.341 F .841
+(alue of 2, and the shell is)-.25 F -.15(exe)220 386.4 S .488
+(cuting in a subroutine \(a shell function or a shell script e).15 F
+-.15(xe)-.15 G .488(cuted by the).15 F F1(.)2.988 E F0(or)2.988 E F1
+(sour)220 398.4 Q(ce)-.18 E F0 -.2(bu)2.5 G
+(iltins\), the shell simulates a call to).2 E F1 -.18(re)2.5 G(tur).18 E
+(n)-.15 E F0(.)A F1(4.)184 415.2 Q F2 -.27(BA)220 415.2 S(SH_ARGC).27 E
+F0(and)3.153 E F2 -.27(BA)3.403 G(SH_ARGV).27 E F0 .904
+(are updated as described in their descriptions)3.154 F(abo)220 427.2 Q
+-.15(ve)-.15 G(.).15 E F1(5.)184 444 Q F0 1.637(Function tracing is ena\
+bled: command substitution, shell functions, and sub-)220 444 R
+(shells in)220 456 Q -.2(vo)-.4 G -.1(ke).2 G 2.5(dw).1 G(ith)-2.5 E F1
+(\()2.5 E/F4 10/Times-Italic@0 SF(command)2.5 E F1(\))2.5 E F0
+(inherit the)2.5 E F1(DEB)2.5 E(UG)-.1 E F0(and)2.5 E F1(RETURN)2.5 E F0
+(traps.)2.5 E F1(6.)184 472.8 Q F0 1.082(Error tracing is enabled: comm\
+and substitution, shell functions, and subshells)220 472.8 R(in)220
+484.8 Q -.2(vo)-.4 G -.1(ke).2 G 2.5(dw).1 G(ith)-2.5 E F1(\()2.5 E F4
+(command)2.5 E F1(\))2.5 E F0(inherit the)2.5 E F1(ERR)2.5 E F0(trap.)
+2.5 E F1(extglob)144 501.6 Q F0 .4(If set, the e)184 501.6 R .4
+(xtended pattern matching features described abo)-.15 F .7 -.15(ve u)
+-.15 H(nder).15 E F1 -.1(Pa)2.9 G .4(thname Expan-).1 F(sion)184 513.6 Q
+F0(are enabled.)2.5 E F1(extquote)144 530.4 Q F0 .86(If set,)184 542.4 R
+F1($)3.36 E F0<08>A F4(string)A F0 3.36<0861>C(nd)-3.36 E F1($)3.36 E F0
+(")A F4(string)A F0 3.36("q)C .86(uoting is performed within)-3.36 F F1
+(${)3.36 E F4(par)A(ameter)-.15 E F1(})A F0 -.15(ex)3.36 G .86
+(pansions en-).15 F(closed in double quotes.)184 554.4 Q
+(This option is enabled by def)5 E(ault.)-.1 E F1(failglob)144 571.2 Q
+F0 .243(If set, patterns which f)184 571.2 R .243
+(ail to match \214lenames during pathname e)-.1 F .243
+(xpansion result in an e)-.15 F(x-)-.15 E(pansion error)184 583.2 Q(.)
+-.55 E F1 -.25(fo)144 600 S -.18(rc).25 G(e_\214gnor).18 E(e)-.18 E F0
+.936(If set, the suf)184 612 R<8c78>-.25 E .936(es speci\214ed by the)
+-.15 F F2(FIGNORE)3.436 E F0 .936(shell v)3.186 F .936(ariable cause w)
+-.25 F .937(ords to be ignored)-.1 F .32(when performing w)184 624 R .32
+(ord completion e)-.1 F -.15(ve)-.25 G 2.82(ni).15 G 2.82(ft)-2.82 G .32
+(he ignored w)-2.82 F .32(ords are the only possible com-)-.1 F 2.947
+(pletions. See)184 636 R F2 .447(SHELL V)2.947 F(ARIABLES)-1.215 E F0
+(abo)2.697 E .747 -.15(ve f)-.15 H .448(or a description of).15 F F2
+(FIGNORE)2.948 E F3(.)A F0 .448(This option is)4.948 F(enabled by def)
+184 648 Q(ault.)-.1 E F1(globasciiranges)144 664.8 Q F0 2.519
+(If set, range e)184 676.8 R 2.519
+(xpressions used in pattern matching brack)-.15 F 2.518(et e)-.1 F 2.518
+(xpressions \(see)-.15 F F2 -.09(Pa)5.018 G(tter).09 E(n)-.135 E
+(Matching)184 688.8 Q F0(abo)2.964 E -.15(ve)-.15 G 3.214(\)b).15 G(eha)
+-3.214 E 1.014 -.15(ve a)-.2 H 3.214(si).15 G 3.214(fi)-3.214 G 3.214
+(nt)-3.214 G .714(he traditional C locale when performing comparisons.)
+-3.214 F 1.02(That is, the current locale')184 700.8 R 3.52(sc)-.55 G
+1.02(ollating sequence is not tak)-3.52 F 1.02(en into account, so)-.1 F
+F1(b)3.52 E F0 1.02(will not)3.52 F .956(collate between)184 712.8 R F1
+(A)3.456 E F0(and)3.456 E F1(B)3.456 E F0 3.457(,a)C .957(nd upper)
+-3.457 F .957(-case and lo)-.2 F(wer)-.25 E .957
+(-case ASCII characters will collate)-.2 F(together)184 724.8 Q(.)-.55 E
+(GNU Bash 5.0)72 768 Q(2004 Apr 20)149.565 E(19)198.725 E 0 Cg EP
+%%Page: 20 20
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S(SH_B).35 E(UIL)-.1 E 87.61
+(TINS\(1\) General)-.92 F(Commands Manual)2.5 E -.35(BA)90.11 G(SH_B).35
+E(UIL)-.1 E(TINS\(1\))-.92 E/F1 10/Times-Bold@0 SF(globstar)144 84 Q F0
+.519(If set, the pattern)184 84 R F1(**)3.019 E F0 .519
+(used in a pathname e)3.019 F .519(xpansion conte)-.15 F .518
+(xt will match all \214les and zero)-.15 F .431
+(or more directories and subdirectories.)184 96 R .431
+(If the pattern is follo)5.431 F .432(wed by a)-.25 F F1(/)2.932 E F0
+2.932(,o)C .432(nly directories)-2.932 F(and subdirectories match.)184
+108 Q F1(gnu_errfmt)144 124.8 Q F0(If set, shell error messages are wri\
+tten in the standard GNU error message format.)184 136.8 Q F1
+(histappend)144 153.6 Q F0 .676
+(If set, the history list is appended to the \214le named by the v)184
+165.6 R .676(alue of the)-.25 F/F2 9/Times-Bold@0 SF(HISTFILE)3.176 E F0
+-.25(va)2.926 G(ri-).25 E(able when the shell e)184 177.6 Q
+(xits, rather than o)-.15 E -.15(ve)-.15 G(rwriting the \214le.).15 E F1
+(histr)144 194.4 Q(eedit)-.18 E F0 .575(If set, and)184 206.4 R F1 -.18
+(re)3.075 G(adline).18 E F0 .575(is being used, a user is gi)3.075 F
+-.15(ve)-.25 G 3.075(nt).15 G .576(he opportunity to re-edit a f)-3.075
+F .576(ailed his-)-.1 F(tory substitution.)184 218.4 Q F1(histv)144
+235.2 Q(erify)-.1 E F0 .403(If set, and)184 247.2 R F1 -.18(re)2.903 G
+(adline).18 E F0 .403
+(is being used, the results of history substitution are not immediately)
+2.903 F .661(passed to the shell parser)184 259.2 R 5.661(.I)-.55 G .662
+(nstead, the resulting line is loaded into the)-5.661 F F1 -.18(re)3.162
+G(adline).18 E F0(editing)3.162 E -.2(bu)184 271.2 S -.25(ff).2 G(er).25
+E 2.5(,a)-.4 G(llo)-2.5 E(wing further modi\214cation.)-.25 E F1
+(hostcomplete)144 288 Q F0 1.182(If set, and)184 300 R F1 -.18(re)3.682
+G(adline).18 E F0 1.182(is being used,)3.682 F F1(bash)3.682 E F0 1.181
+(will attempt to perform hostname completion)3.681 F 1.38(when a w)184
+312 R 1.38(ord containing a)-.1 F F1(@)3.881 E F0 1.381
+(is being completed \(see)3.881 F F1(Completing)3.881 E F0(under)3.881 E
+F2(READLINE)3.881 E F0(abo)184 324 Q -.15(ve)-.15 G 2.5(\). This).15 F
+(is enabled by def)2.5 E(ault.)-.1 E F1(huponexit)144 340.8 Q F0
+(If set,)184 352.8 Q F1(bash)2.5 E F0(will send)2.5 E F2(SIGHUP)2.5 E F0
+(to all jobs when an interacti)2.25 E .3 -.15(ve l)-.25 H(ogin shell e)
+.15 E(xits.)-.15 E F1(inherit_err)144 369.6 Q(exit)-.18 E F0 .22
+(If set, command substitution inherits the v)184 381.6 R .219
+(alue of the)-.25 F F1(err)2.719 E(exit)-.18 E F0 .219
+(option, instead of unsetting)2.719 F(it in the subshell en)184 393.6 Q
+2.5(vironment. This)-.4 F(option is enabled when)2.5 E/F3 10
+/Times-Italic@0 SF(posix mode)2.5 E F0(is enabled.)2.5 E F1(interacti)
+144 410.4 Q -.1(ve)-.1 G(_comments).1 E F0 .33(If set, allo)184 422.4 R
+2.83(waw)-.25 G .33(ord be)-2.93 F .33(ginning with)-.15 F F1(#)2.83 E
+F0 .33(to cause that w)2.83 F .33(ord and all remaining characters on)
+-.1 F .967(that line to be ignored in an interacti)184 434.4 R 1.267
+-.15(ve s)-.25 H .967(hell \(see).15 F F2(COMMENTS)3.467 E F0(abo)3.217
+E -.15(ve)-.15 G 3.467(\). This).15 F .967(option is)3.467 F
+(enabled by def)184 446.4 Q(ault.)-.1 E F1(lastpipe)144 463.2 Q F0 .066
+(If set, and job control is not acti)184 463.2 R -.15(ve)-.25 G 2.566
+(,t).15 G .066(he shell runs the last command of a pipeline not e)-2.566
+F -.15(xe)-.15 G(-).15 E
+(cuted in the background in the current shell en)184 475.2 Q(vironment.)
+-.4 E F1(lithist)144 492 Q F0 .655(If set, and the)184 492 R F1(cmdhist)
+3.155 E F0 .654(option is enabled, multi-line commands are sa)3.154 F
+-.15(ve)-.2 G 3.154(dt).15 G 3.154(ot)-3.154 G .654(he history)-3.154 F
+(with embedded ne)184 504 Q
+(wlines rather than using semicolon separators where possible.)-.25 E F1
+(localv)144 520.8 Q(ar_inherit)-.1 E F0 .421(If set, local v)184 532.8 R
+.422(ariables inherit the v)-.25 F .422(alue and attrib)-.25 F .422
+(utes of a v)-.2 F .422(ariable of the same name that)-.25 F -.15(ex)184
+544.8 S .174(ists at a pre).15 F .174(vious scope before an)-.25 F 2.673
+(yn)-.15 G .673 -.25(ew va)-2.673 H .173(lue is assigned.).25 F .173
+(The nameref attrib)5.173 F .173(ute is not)-.2 F(inherited.)184 556.8 Q
+F1(localv)144 573.6 Q(ar_unset)-.1 E F0 .328(If set, calling)184 585.6 R
+F1(unset)2.828 E F0 .328(on local v)2.828 F .329(ariables in pre)-.25 F
+.329(vious function scopes marks them so subse-)-.25 F .543(quent looku\
+ps \214nd them unset until that function returns. This is identical to \
+the beha)184 597.6 R(v-)-.2 E(ior of unsetting local v)184 609.6 Q
+(ariables at the current function scope.)-.25 E F1(login_shell)144 626.4
+Q F0 .486
+(The shell sets this option if it is started as a login shell \(see)184
+638.4 R F2(INV)2.987 E(OCA)-.405 E(TION)-.855 E F0(abo)2.737 E -.15(ve)
+-.15 G 2.987(\). The).15 F -.25(va)184 650.4 S(lue may not be changed.)
+.25 E F1(mailwar)144 667.2 Q(n)-.15 E F0 .815(If set, and a \214le that)
+184 679.2 R F1(bash)3.315 E F0 .814
+(is checking for mail has been accessed since the last time it)3.315 F
+-.1(wa)184 691.2 S 2.5(sc).1 G(heck)-2.5 E(ed, the message `)-.1 E
+(`The mail in)-.74 E F3(mail\214le)2.5 E F0(has been read')2.5 E 2.5('i)
+-.74 G 2.5(sd)-2.5 G(isplayed.)-2.5 E(GNU Bash 5.0)72 768 Q(2004 Apr 20)
+149.565 E(20)198.725 E 0 Cg EP
+%%Page: 21 21
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S(SH_B).35 E(UIL)-.1 E 87.61
+(TINS\(1\) General)-.92 F(Commands Manual)2.5 E -.35(BA)90.11 G(SH_B).35
+E(UIL)-.1 E(TINS\(1\))-.92 E/F1 10/Times-Bold@0 SF
+(no_empty_cmd_completion)144 84 Q F0 .324(If set, and)184 96 R F1 -.18
+(re)2.824 G(adline).18 E F0 .324(is being used,)2.824 F F1(bash)2.824 E
+F0 .324(will not attempt to search the)2.824 F/F2 9/Times-Bold@0 SF
+-.666(PA)2.825 G(TH)-.189 E F0 .325(for possible)2.575 F
+(completions when completion is attempted on an empty line.)184 108 Q F1
+(nocaseglob)144 124.8 Q F0 .437(If set,)184 136.8 R F1(bash)2.937 E F0
+.436(matches \214lenames in a case\255insensiti)2.937 F .736 -.15(ve f)
+-.25 H .436(ashion when performing pathname).05 F -.15(ex)184 148.8 S
+(pansion \(see).15 E F1 -.1(Pa)2.5 G(thname Expansion).1 E F0(abo)2.5 E
+-.15(ve)-.15 G(\).).15 E F1(nocasematch)144 165.6 Q F0 1.193(If set,)184
+177.6 R F1(bash)3.693 E F0 1.194
+(matches patterns in a case\255insensiti)3.693 F 1.494 -.15(ve f)-.25 H
+1.194(ashion when performing matching).05 F .551(while e)184 189.6 R
+-.15(xe)-.15 G(cuting).15 E F1(case)3.051 E F0(or)3.051 E F1([[)3.051 E
+F0 .551(conditional commands, when performing pattern substitution)3.051
+F -.1(wo)184 201.6 S .622(rd e).1 F .623(xpansions, or when \214ltering\
+ possible completions as part of programmable com-)-.15 F(pletion.)184
+213.6 Q F1(nullglob)144 230.4 Q F0 .855(If set,)184 242.4 R F1(bash)
+3.355 E F0(allo)3.355 E .855(ws patterns which match no \214les \(see)
+-.25 F F1 -.1(Pa)3.354 G .854(thname Expansion).1 F F0(abo)3.354 E -.15
+(ve)-.15 G 3.354(\)t).15 G(o)-3.354 E -.15(ex)184 254.4 S
+(pand to a null string, rather than themselv).15 E(es.)-.15 E F1(pr)144
+271.2 Q(ogcomp)-.18 E F0 .676(If set, the programmable completion f)184
+283.2 R .677(acilities \(see)-.1 F F1(Pr)3.177 E .677
+(ogrammable Completion)-.18 F F0(abo)3.177 E -.15(ve)-.15 G(\)).15 E
+(are enabled.)184 295.2 Q(This option is enabled by def)5 E(ault.)-.1 E
+F1(pr)144 312 Q(ogcomp_alias)-.18 E F0 2.124
+(If set, and programmable completion is enabled,)184 324 R F1(bash)4.624
+E F0 2.124(treats a command name that)4.624 F(doesn')184 336 Q 3.288(th)
+-.18 G -2.25 -.2(av e)-3.288 H(an)3.488 E 3.288(yc)-.15 G .789
+(ompletions as a possible alias and attempts alias e)-3.288 F .789
+(xpansion. If it has)-.15 F 1.473(an alias,)184 348 R F1(bash)3.973 E F0
+1.473(attempts programmable completion using the command w)3.973 F 1.473
+(ord resulting)-.1 F(from the e)184 360 Q(xpanded alias.)-.15 E F1(pr)
+144 376.8 Q(omptv)-.18 E(ars)-.1 E F0 1.447
+(If set, prompt strings under)184 388.8 R 1.448(go parameter e)-.18 F
+1.448(xpansion, command substitution, arithmetic)-.15 F -.15(ex)184
+400.8 S .171(pansion, and quote remo).15 F -.25(va)-.15 G 2.67(la).25 G
+.17(fter being e)-2.67 F .17(xpanded as described in)-.15 F F2(PR)2.67 E
+(OMPTING)-.27 E F0(abo)2.42 E -.15(ve)-.15 G(.).15 E
+(This option is enabled by def)184 412.8 Q(ault.)-.1 E F1 -.18(re)144
+429.6 S(stricted_shell).18 E F0 1.069
+(The shell sets this option if it is started in restricted mode \(see)
+184 441.6 R F2 1.069(RESTRICTED SHELL)3.569 F F0(belo)184 453.6 Q 2.86
+(w\). The)-.25 F -.25(va)2.86 G .36(lue may not be changed.).25 F .36
+(This is not reset when the startup \214les are e)5.36 F -.15(xe)-.15 G
+(-).15 E(cuted, allo)184 465.6 Q(wing the startup \214les to disco)-.25
+E -.15(ve)-.15 G 2.5(rw).15 G(hether or not a shell is restricted.)-2.5
+E F1(shift_v)144 482.4 Q(erbose)-.1 E F0 .501(If set, the)184 494.4 R F1
+(shift)3.001 E F0 -.2(bu)3.001 G .501
+(iltin prints an error message when the shift count e).2 F .502
+(xceeds the number)-.15 F(of positional parameters.)184 506.4 Q F1(sour)
+144 523.2 Q(cepath)-.18 E F0 .771(If set, the)184 535.2 R F1(sour)3.271
+E(ce)-.18 E F0(\()3.271 E F1(.)A F0 3.271(\)b)C .771(uiltin uses the v)
+-3.471 F .771(alue of)-.25 F F2 -.666(PA)3.27 G(TH)-.189 E F0 .77
+(to \214nd the directory containing the)3.02 F(\214le supplied as an ar)
+184 547.2 Q 2.5(gument. This)-.18 F(option is enabled by def)2.5 E
+(ault.)-.1 E F1(xpg_echo)144 564 Q F0(If set, the)184 576 Q F1(echo)2.5
+E F0 -.2(bu)2.5 G(iltin e).2 E(xpands backslash-escape sequences by def)
+-.15 E(ault.)-.1 E F1(suspend)108 592.8 Q F0([)2.5 E F1<ad66>A F0(])A
+1.001(Suspend the e)144 604.8 R -.15(xe)-.15 G 1.001
+(cution of this shell until it recei).15 F -.15(ve)-.25 G 3.501(sa).15 G
+F2(SIGCONT)A F0 3.502(signal. A)3.252 F 1.002(login shell cannot be)
+3.502 F .023(suspended; the)144 616.8 R F1<ad66>2.523 E F0 .023
+(option can be used to o)2.523 F -.15(ve)-.15 G .022
+(rride this and force the suspension.).15 F .022(The return status is)
+5.022 F 2.5(0u)144 628.8 S(nless the shell is a login shell and)-2.5 E
+F1<ad66>2.5 E F0(is not supplied, or if job control is not enabled.)2.5
+E F1(test)108 645.6 Q/F3 10/Times-Italic@0 SF -.2(ex)2.5 G(pr).2 E F1([)
+108 657.6 Q F3 -.2(ex)2.5 G(pr).2 E F1(])2.5 E F0 .877
+(Return a status of 0 \(true\) or 1 \(f)144 657.6 R .878
+(alse\) depending on the e)-.1 F -.25(va)-.25 G .878
+(luation of the conditional e).25 F(xpression)-.15 E F3 -.2(ex)144 669.6
+S(pr).2 E F0 5.53(.E).73 G .53
+(ach operator and operand must be a separate ar)-5.53 F 3.03
+(gument. Expressions)-.18 F .53(are composed of the)3.03 F .072
+(primaries described in the)144 681.6 R F1(bash)2.573 E F0 .073
+(manual page under)2.573 F F2(CONDITION)2.573 E .073(AL EXPRESSIONS)-.18
+F/F4 9/Times-Roman@0 SF(.)A F1(test)4.573 E F0 .073(does not)2.573 F
+.695(accept an)144 693.6 R 3.195(yo)-.15 G .695
+(ptions, nor does it accept and ignore an ar)-3.195 F .694(gument of)
+-.18 F F1<adad>3.194 E F0 .694(as signifying the end of op-)3.194 F
+(tions.)144 705.6 Q 3.141(Expressions may be combined using the follo)
+144 723.6 R 3.141(wing operators, listed in decreasing order of)-.25 F
+(GNU Bash 5.0)72 768 Q(2004 Apr 20)149.565 E(21)198.725 E 0 Cg EP
+%%Page: 22 22
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S(SH_B).35 E(UIL)-.1 E 87.61
+(TINS\(1\) General)-.92 F(Commands Manual)2.5 E -.35(BA)90.11 G(SH_B).35
+E(UIL)-.1 E(TINS\(1\))-.92 E 4.114(precedence. The)144 84 R -.25(eva)
+4.114 G 1.613(luation depends on the number of ar).25 F 1.613
+(guments; see belo)-.18 F 5.413 -.65(w. O)-.25 H 1.613(perator prece-)
+.65 F(dence is used when there are \214v)144 96 Q 2.5(eo)-.15 G 2.5(rm)
+-2.5 G(ore ar)-2.5 E(guments.)-.18 E/F1 10/Times-Bold@0 SF(!)144 108 Q
+/F2 10/Times-Italic@0 SF -.2(ex)2.5 G(pr).2 E F0 -.35(Tr)180 108 S
+(ue if).35 E F2 -.2(ex)2.5 G(pr).2 E F0(is f)3.23 E(alse.)-.1 E F1(\()
+144 120 Q F2 -.2(ex)2.5 G(pr).2 E F1(\))2.5 E F0 .26(Returns the v)180
+120 R .26(alue of)-.25 F F2 -.2(ex)2.76 G(pr).2 E F0 5.26(.T)C .26
+(his may be used to o)-5.26 F -.15(ve)-.15 G .26
+(rride the normal precedence of opera-).15 F(tors.)180 132 Q F2 -.2(ex)
+144 144 S(pr1).2 E F0<ad>2.5 E F1(a)A F2 -.2(ex)2.5 G(pr2).2 E F0 -.35
+(Tr)180 156 S(ue if both).35 E F2 -.2(ex)2.5 G(pr1).2 E F0(and)2.5 E F2
+-.2(ex)2.5 G(pr2).2 E F0(are true.)2.52 E F2 -.2(ex)144 168 S(pr1).2 E
+F0<ad>2.5 E F1(o)A F2 -.2(ex)2.5 G(pr2).2 E F0 -.35(Tr)180 180 S
+(ue if either).35 E F2 -.2(ex)2.5 G(pr1).2 E F0(or)2.5 E F2 -.2(ex)2.5 G
+(pr2).2 E F0(is true.)2.52 E F1(test)144 196.8 Q F0(and)2.5 E F1([)2.5 E
+F0 -.25(eva)2.5 G(luate conditional e).25 E
+(xpressions using a set of rules based on the number of ar)-.15 E
+(guments.)-.18 E 2.5(0a)144 214.8 S -.18(rg)-2.5 G(uments).18 E(The e)
+180 226.8 Q(xpression is f)-.15 E(alse.)-.1 E 2.5(1a)144 238.8 S -.18
+(rg)-2.5 G(ument).18 E(The e)180 250.8 Q
+(xpression is true if and only if the ar)-.15 E(gument is not null.)-.18
+E 2.5(2a)144 262.8 S -.18(rg)-2.5 G(uments).18 E .37(If the \214rst ar)
+180 274.8 R .37(gument is)-.18 F F1(!)2.87 E F0 2.87(,t)C .37(he e)-2.87
+F .37(xpression is true if and only if the second ar)-.15 F .37
+(gument is null.)-.18 F .379(If the \214rst ar)180 286.8 R .38
+(gument is one of the unary conditional operators listed abo)-.18 F .68
+-.15(ve u)-.15 H(nder).15 E/F3 9/Times-Bold@0 SF(CONDI-)2.88 E(TION)180
+298.8 Q .553(AL EXPRESSIONS)-.18 F/F4 9/Times-Roman@0 SF(,)A F0 .552
+(the e)2.802 F .552(xpression is true if the unary test is true.)-.15 F
+.552(If the \214rst ar)5.552 F(gu-)-.18 E(ment is not a v)180 310.8 Q
+(alid unary conditional operator)-.25 E 2.5(,t)-.4 G(he e)-2.5 E
+(xpression is f)-.15 E(alse.)-.1 E 2.5(3a)144 322.8 S -.18(rg)-2.5 G
+(uments).18 E .236(The follo)180 334.8 R .236
+(wing conditions are applied in the order listed.)-.25 F .236
+(If the second ar)5.236 F .236(gument is one of)-.18 F .855
+(the binary conditional operators listed abo)180 346.8 R 1.155 -.15
+(ve u)-.15 H(nder).15 E F3(CONDITION)3.355 E .855(AL EXPRESSIONS)-.18 F
+F4(,)A F0(the)3.104 E .578(result of the e)180 358.8 R .578(xpression i\
+s the result of the binary test using the \214rst and third ar)-.15 F
+(guments)-.18 E 1.333(as operands.)180 370.8 R(The)6.333 E F1<ad61>3.833
+E F0(and)3.833 E F1<ad6f>3.832 E F0 1.332
+(operators are considered binary operators when there are)3.832 F .558
+(three ar)180 382.8 R 3.058(guments. If)-.18 F .558(the \214rst ar)3.058
+F .558(gument is)-.18 F F1(!)3.058 E F0 3.058(,t)C .558(he v)-3.058 F
+.558(alue is the ne)-.25 F -.05(ga)-.15 G .558(tion of the tw).05 F
+(o-ar)-.1 E(gument)-.18 E .521(test using the second and third ar)180
+394.8 R 3.021(guments. If)-.18 F .521(the \214rst ar)3.021 F .52
+(gument is e)-.18 F(xactly)-.15 E F1(\()3.02 E F0 .52(and the third)3.02
+F(ar)180 406.8 Q .485(gument is e)-.18 F(xactly)-.15 E F1(\))2.985 E F0
+2.985(,t)C .485(he result is the one-ar)-2.985 F .485
+(gument test of the second ar)-.18 F 2.985(gument. Other)-.18 F(-)-.2 E
+(wise, the e)180 418.8 Q(xpression is f)-.15 E(alse.)-.1 E 2.5(4a)144
+430.8 S -.18(rg)-2.5 G(uments).18 E .385(If the \214rst ar)180 442.8 R
+.385(gument is)-.18 F F1(!)2.885 E F0 2.885(,t)C .385
+(he result is the ne)-2.885 F -.05(ga)-.15 G .384(tion of the three-ar)
+.05 F .384(gument e)-.18 F .384(xpression com-)-.15 F .284
+(posed of the remaining ar)180 454.8 R 2.784(guments. Otherwise,)-.18 F
+.284(the e)2.784 F .284(xpression is parsed and e)-.15 F -.25(va)-.25 G
+.285(luated ac-).25 F(cording to precedence using the rules listed abo)
+180 466.8 Q -.15(ve)-.15 G(.).15 E 2.5(5o)144 478.8 S 2.5(rm)-2.5 G
+(ore ar)-2.5 E(guments)-.18 E 1.635(The e)180 490.8 R 1.635
+(xpression is parsed and e)-.15 F -.25(va)-.25 G 1.635
+(luated according to precedence using the rules listed).25 F(abo)180
+502.8 Q -.15(ve)-.15 G(.).15 E(When used with)144 520.8 Q F1(test)2.5 E
+F0(or)2.5 E F1([)2.5 E F0 2.5(,t)C(he)-2.5 E F1(<)2.5 E F0(and)2.5 E F1
+(>)2.5 E F0(operators sort le)2.5 E
+(xicographically using ASCII ordering.)-.15 E F1(times)108 537.6 Q F0
+1.229(Print the accumulated user and system times for the shell and for\
+ processes run from the shell.)144 537.6 R(The return status is 0.)144
+549.6 Q F1(trap)108 566.4 Q F0([)2.5 E F1(\255lp)A F0 2.5(][)C([)-2.5 E
+F2(ar)A(g)-.37 E F0(])A F2(sigspec)2.5 E F0(...])2.5 E .683(The command)
+144 578.4 R F2(ar)3.513 E(g)-.37 E F0 .683(is to be read and e)3.403 F
+-.15(xe)-.15 G .682(cuted when the shell recei).15 F -.15(ve)-.25 G
+3.182(ss).15 G(ignal\(s\))-3.182 E F2(sigspec)3.522 E F0 5.682(.I).31 G
+(f)-5.682 E F2(ar)3.512 E(g)-.37 E F0(is)3.402 E .608
+(absent \(and there is a single)144 590.4 R F2(sigspec)3.108 E F0 3.108
+(\)o)C(r)-3.108 E F1<ad>3.108 E F0 3.108(,e)C .608
+(ach speci\214ed signal is reset to its original disposition)-3.108 F
+.659(\(the v)144 602.4 R .659(alue it had upon entrance to the shell\).)
+-.25 F(If)5.658 E F2(ar)3.488 E(g)-.37 E F0 .658
+(is the null string the signal speci\214ed by each)3.378 F F2(sigspec)
+144.34 614.4 Q F0 .58(is ignored by the shell and by the commands it in)
+3.39 F -.2(vo)-.4 G -.1(ke).2 G 3.081(s. If).1 F F2(ar)3.411 E(g)-.37 E
+F0 .581(is not present and)3.301 F F1<ad70>3.081 E F0(has)3.081 E 1.215
+(been supplied, then the trap commands associated with each)144 626.4 R
+F2(sigspec)4.054 E F0 1.214(are displayed.)4.024 F 1.214(If no ar)6.214
+F(gu-)-.18 E .86(ments are supplied or if only)144 638.4 R F1<ad70>3.36
+E F0 .86(is gi)3.36 F -.15(ve)-.25 G(n,).15 E F1(trap)3.36 E F0 .86
+(prints the list of commands associated with each)3.36 F 2.83
+(signal. The)144 650.4 R F1<ad6c>2.83 E F0 .33(option causes the shell \
+to print a list of signal names and their corresponding num-)2.83 F 4.31
+(bers. Each)144 662.4 R F2(sigspec)4.65 E F0 1.811
+(is either a signal name de\214ned in <)4.62 F F2(signal.h)A F0 1.811
+(>, or a signal number)B 6.811(.S)-.55 G(ignal)-6.811 E
+(names are case insensiti)144 674.4 Q .3 -.15(ve a)-.25 H(nd the).15 E
+F3(SIG)2.5 E F0(pre\214x is optional.)2.25 E .667(If a)144 692.4 R F2
+(sigspec)3.507 E F0(is)3.477 E F3(EXIT)3.167 E F0 .667
+(\(0\) the command)2.917 F F2(ar)3.496 E(g)-.37 E F0 .666(is e)3.386 F
+-.15(xe)-.15 G .666(cuted on e).15 F .666(xit from the shell.)-.15 F
+.666(If a)5.666 F F2(sigspec)3.506 E F0(is)3.476 E F3(DE-)3.166 E -.09
+(BU)144 704.4 S(G).09 E F4(,)A F0 .483(the command)2.733 F F2(ar)3.313 E
+(g)-.37 E F0 .483(is e)3.203 F -.15(xe)-.15 G .484(cuted before e).15 F
+-.15(ve)-.25 G(ry).15 E F2 .484(simple command)2.984 F F0(,)A F2(for)
+2.984 E F0(command,)2.984 E F2(case)2.984 E F0(command,)2.984 E F2
+(select)144 716.4 Q F0 .563(command, e)3.063 F -.15(ve)-.25 G .563
+(ry arithmetic).15 F F2(for)3.063 E F0 .563
+(command, and before the \214rst command e)3.063 F -.15(xe)-.15 G .562
+(cutes in a shell).15 F .622(function \(see)144 728.4 R F3 .622
+(SHELL GRAMMAR)3.122 F F0(abo)2.872 E -.15(ve)-.15 G 3.122(\). Refer).15
+F .622(to the description of the)3.122 F F1(extdeb)3.122 E(ug)-.2 E F0
+.622(option to the)3.122 F(GNU Bash 5.0)72 768 Q(2004 Apr 20)149.565 E
+(22)198.725 E 0 Cg EP
+%%Page: 23 23
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S(SH_B).35 E(UIL)-.1 E 87.61
+(TINS\(1\) General)-.92 F(Commands Manual)2.5 E -.35(BA)90.11 G(SH_B).35
+E(UIL)-.1 E(TINS\(1\))-.92 E/F1 10/Times-Bold@0 SF(shopt)144 84 Q F0 -.2
+(bu)2.996 G .496(iltin for details of its ef).2 F .496(fect on the)-.25
+F F1(DEB)2.996 E(UG)-.1 E F0 2.996(trap. If)2.996 F(a)2.996 E/F2 10
+/Times-Italic@0 SF(sigspec)3.336 E F0(is)3.306 E/F3 9/Times-Bold@0 SF
+(RETURN)2.996 E/F4 9/Times-Roman@0 SF(,)A F0 .496(the command)2.746 F F2
+(ar)144.33 96 Q(g)-.37 E F0 .18(is e)2.9 F -.15(xe)-.15 G .18
+(cuted each time a shell function or a script e).15 F -.15(xe)-.15 G .18
+(cuted with the).15 F F1(.)2.68 E F0(or)2.68 E F1(sour)2.68 E(ce)-.18 E
+F0 -.2(bu)2.68 G .18(iltins \214nishes).2 F -.15(exe)144 108 S(cuting.)
+.15 E .961(If a)144 126 R F2(sigspec)3.801 E F0(is)3.771 E F3(ERR)3.461
+E F4(,)A F0 .961(the command)3.211 F F2(ar)3.791 E(g)-.37 E F0 .961
+(is e)3.681 F -.15(xe)-.15 G .961(cuted whene).15 F -.15(ve)-.25 G 3.461
+(ra).15 G .96(pipeline \(which may consist of a)-.001 F .185(single sim\
+ple command\), a list, or a compound command returns a non\255zero e)144
+138 R .185(xit status, subject to)-.15 F .452(the follo)144 150 R .452
+(wing conditions.)-.25 F(The)5.452 E F3(ERR)2.952 E F0 .451
+(trap is not e)2.701 F -.15(xe)-.15 G .451(cuted if the f).15 F .451
+(ailed command is part of the com-)-.1 F .387
+(mand list immediately follo)144 162 R .387(wing a)-.25 F F1(while)2.887
+E F0(or)2.887 E F1(until)2.888 E F0 -.1(ke)2.888 G(yw)-.05 E .388
+(ord, part of the test in an)-.1 F F2(if)2.898 E F0 .388
+(statement, part)4.848 F .778(of a command e)144 174 R -.15(xe)-.15 G
+.778(cuted in a).15 F F1(&&)3.278 E F0(or)3.278 E F1(||)3.278 E F0 .778
+(list e)3.278 F .778(xcept the command follo)-.15 F .778
+(wing the \214nal)-.25 F F1(&&)3.278 E F0(or)3.278 E F1(||)3.277 E F0
+3.277(,a)C -.15(ny)-3.277 G 1.28(command in a pipeline b)144 186 R 1.28
+(ut the last, or if the command')-.2 F 3.78(sr)-.55 G 1.28(eturn v)-3.78
+F 1.28(alue is being in)-.25 F -.15(ve)-.4 G 1.28(rted using).15 F F1(!)
+3.78 E F0(.)A(These are the same conditions obe)144 198 Q(yed by the)
+-.15 E F1(err)2.5 E(exit)-.18 E F0(\()2.5 E F1<ad65>A F0 2.5(\)o)C
+(ption.)-2.5 E .133
+(Signals ignored upon entry to the shell cannot be trapped or reset.)144
+216 R -.35(Tr)5.132 G .132(apped signals that are not be-).35 F .117
+(ing ignored are reset to their original v)144 228 R .117
+(alues in a subshell or subshell en)-.25 F .117
+(vironment when one is cre-)-.4 F 2.5(ated. The)144 240 R
+(return status is f)2.5 E(alse if an)-.1 E(y)-.15 E F2(sigspec)2.84 E F0
+(is in)2.81 E -.25(va)-.4 G(lid; otherwise).25 E F1(trap)2.5 E F0
+(returns true.)2.5 E F1(type)108 256.8 Q F0([)2.5 E F1(\255aftpP)A F0(])
+A F2(name)2.5 E F0([)2.5 E F2(name)A F0(...])2.5 E -.4(Wi)144 268.8 S
+.174(th no options, indicate ho).4 F 2.674(we)-.25 G(ach)-2.674 E F2
+(name)3.034 E F0 -.1(wo)2.854 G .173
+(uld be interpreted if used as a command name.).1 F .173(If the)5.173 F
+F1<ad74>144 280.8 Q F0 .715(option is used,)3.215 F F1(type)3.215 E F0
+.715(prints a string which is one of)3.215 F F2(alias)3.545 E F0(,).27 E
+F2 -.1(ke)3.215 G(ywor)-.2 E(d)-.37 E F0(,).77 E F2(function)5.185 E F0
+(,).24 E F2 -.2(bu)3.215 G(iltin).2 E F0 3.215(,o).24 G(r)-3.215 E F2
+(\214le)5.125 E F0(if)3.395 E F2(name)144.36 292.8 Q F0 .087
+(is an alias, shell reserv)2.767 F .087(ed w)-.15 F .087
+(ord, function, b)-.1 F .086(uiltin, or disk \214le, respecti)-.2 F -.15
+(ve)-.25 G(ly).15 E 5.086(.I)-.65 G 2.586(ft)-5.086 G(he)-2.586 E F2
+(name)2.946 E F0 .086(is not)2.766 F .118
+(found, then nothing is printed, and an e)144 304.8 R .118
+(xit status of f)-.15 F .118(alse is returned.)-.1 F .119(If the)5.119 F
+F1<ad70>2.619 E F0 .119(option is used,)2.619 F F1(type)2.619 E F0 .855
+(either returns the name of the disk \214le that w)144 316.8 R .855
+(ould be e)-.1 F -.15(xe)-.15 G .855(cuted if).15 F F2(name)3.715 E F0
+.855(were speci\214ed as a com-)3.535 F .528(mand name, or nothing if)
+144 328.8 R/F5 10/Courier@0 SF .528(type -t name)3.028 F F0 -.1(wo)3.028
+G .528(uld not return).1 F F2(\214le)4.938 E F0 5.528(.T).18 G(he)-5.528
+E F1<ad50>3.028 E F0 .529(option forces a)3.028 F F3 -.666(PA)3.029 G
+(TH)-.189 E F0 .007(search for each)144 340.8 R F2(name)2.507 E F0 2.507
+(,e)C -.15(ve)-2.757 G 2.507(ni).15 G(f)-2.507 E F5 .007(type -t name)
+2.507 F F0 -.1(wo)2.507 G .007(uld not return).1 F F2(\214le)4.417 E F0
+5.006(.I).18 G 2.506(fac)-5.006 G .006(ommand is hashed,)-2.506 F F1
+<ad70>2.506 E F0(and)144 352.8 Q F1<ad50>3.23 E F0 .73
+(print the hashed v)3.23 F .731
+(alue, which is not necessarily the \214le that appears \214rst in)-.25
+F F3 -.666(PA)3.231 G(TH)-.189 E F4(.)A F0 .731(If the)5.231 F F1<ad61>
+144 364.8 Q F0 .824(option is used,)3.324 F F1(type)3.324 E F0 .824
+(prints all of the places that contain an e)3.324 F -.15(xe)-.15 G .823
+(cutable named).15 F F2(name)3.683 E F0 5.823(.T).18 G .823(his in-)
+-5.823 F 1.176(cludes aliases and functions, if and only if the)144
+376.8 R F1<ad70>3.676 E F0 1.176(option is not also used.)3.676 F 1.177
+(The table of hashed)6.176 F 1.223(commands is not consulted when using)
+144 388.8 R F1<ad61>3.723 E F0 6.223(.T)C(he)-6.223 E F1<ad66>3.723 E F0
+1.223(option suppresses shell function lookup, as)3.723 F .325(with the)
+144 400.8 R F1(command)2.825 E F0 -.2(bu)2.825 G(iltin.).2 E F1(type)
+5.325 E F0 .325(returns true if all of the ar)2.825 F .326
+(guments are found, f)-.18 F .326(alse if an)-.1 F 2.826(ya)-.15 G .326
+(re not)-2.826 F(found.)144 412.8 Q F1(ulimit)108 429.6 Q F0([)2.5 E F1
+(\255HS)A F0(])A F1<ad61>2.5 E(ulimit)108 441.6 Q F0([)2.5 E F1(\255HS)A
+F0 2.5(][)C F1(\255bcde\214klmnpqrstuvxPR)-2.5 E(T)-.4 E F0([)2.5 E F2
+(limit)A F0(]])A(Pro)144 453.6 Q .244(vides control o)-.15 F -.15(ve)
+-.15 G 2.744(rt).15 G .244(he resources a)-2.744 F -.25(va)-.2 G .244
+(ilable to the shell and to processes started by it, on systems).25 F
+.943(that allo)144 465.6 R 3.443(ws)-.25 G .943(uch control.)-3.443 F
+(The)5.943 E F1<ad48>3.443 E F0(and)3.443 E F1<ad53>3.444 E F0 .944
+(options specify that the hard or soft limit is set for the)3.444 F(gi)
+144 477.6 Q -.15(ve)-.25 G 2.709(nr).15 G 2.709(esource. A)-2.709 F .208
+(hard limit cannot be increased by a non-root user once it is set; a so\
+ft limit may)2.709 F .425(be increased up to the v)144 489.6 R .425
+(alue of the hard limit.)-.25 F .426(If neither)5.425 F F1<ad48>2.926 E
+F0(nor)2.926 E F1<ad53>2.926 E F0 .426
+(is speci\214ed, both the soft and)2.926 F .139(hard limits are set.)144
+501.6 R .139(The v)5.139 F .139(alue of)-.25 F F2(limit)2.729 E F0 .139
+(can be a number in the unit speci\214ed for the resource or one)3.319 F
+.741(of the special v)144 513.6 R(alues)-.25 E F1(hard)3.241 E F0(,)A F1
+(soft)3.241 E F0 3.241(,o)C(r)-3.241 E F1(unlimited)3.241 E F0 3.241(,w)
+C .741(hich stand for the current hard limit, the current)-3.241 F .024
+(soft limit, and no limit, respecti)144 525.6 R -.15(ve)-.25 G(ly).15 E
+5.023(.I)-.65 G(f)-5.023 E F2(limit)2.613 E F0 .023
+(is omitted, the current v)3.203 F .023
+(alue of the soft limit of the re-)-.25 F .984
+(source is printed, unless the)144 537.6 R F1<ad48>3.484 E F0 .984
+(option is gi)3.484 F -.15(ve)-.25 G 3.484(n. When).15 F .985
+(more than one resource is speci\214ed, the)3.484 F .7
+(limit name and unit, if appropriate, are printed before the v)144 549.6
+R 3.2(alue. Other)-.25 F .7(options are interpreted as)3.2 F(follo)144
+561.6 Q(ws:)-.25 E F1<ad61>144 573.6 Q F0
+(All current limits are reported; no limits are set)180 573.6 Q F1<ad62>
+144 585.6 Q F0(The maximum sock)180 585.6 Q(et b)-.1 E(uf)-.2 E
+(fer size)-.25 E F1<ad63>144 597.6 Q F0
+(The maximum size of core \214les created)180 597.6 Q F1<ad64>144 609.6
+Q F0(The maximum size of a process')180 609.6 Q 2.5(sd)-.55 G(ata se)
+-2.5 E(gment)-.15 E F1<ad65>144 621.6 Q F0
+(The maximum scheduling priority \("nice"\))180 621.6 Q F1<ad66>144
+633.6 Q F0
+(The maximum size of \214les written by the shell and its children)180
+633.6 Q F1<ad69>144 645.6 Q F0(The maximum number of pending signals)180
+645.6 Q F1<ad6b>144 657.6 Q F0
+(The maximum number of kqueues that may be allocated)180 657.6 Q F1
+<ad6c>144 669.6 Q F0(The maximum size that may be lock)180 669.6 Q
+(ed into memory)-.1 E F1<ad6d>144 681.6 Q F0
+(The maximum resident set size \(man)180 681.6 Q 2.5(ys)-.15 G
+(ystems do not honor this limit\))-2.5 E F1<ad6e>144 693.6 Q F0 .791(Th\
+e maximum number of open \214le descriptors \(most systems do not allo)
+180 693.6 R 3.291(wt)-.25 G .791(his v)-3.291 F .791(alue to)-.25 F
+(be set\))180 705.6 Q F1<ad70>144 717.6 Q F0
+(The pipe size in 512-byte blocks \(this may not be set\))180 717.6 Q
+(GNU Bash 5.0)72 768 Q(2004 Apr 20)149.565 E(23)198.725 E 0 Cg EP
+%%Page: 24 24
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S(SH_B).35 E(UIL)-.1 E 87.61
+(TINS\(1\) General)-.92 F(Commands Manual)2.5 E -.35(BA)90.11 G(SH_B).35
+E(UIL)-.1 E(TINS\(1\))-.92 E/F1 10/Times-Bold@0 SF<ad71>144 84 Q F0
+(The maximum number of bytes in POSIX message queues)180 84 Q F1<ad72>
+144 96 Q F0(The maximum real-time scheduling priority)180 96 Q F1<ad73>
+144 108 Q F0(The maximum stack size)180 108 Q F1<ad74>144 120 Q F0
+(The maximum amount of cpu time in seconds)180 120 Q F1<ad75>144 132 Q
+F0(The maximum number of processes a)180 132 Q -.25(va)-.2 G
+(ilable to a single user).25 E F1<ad76>144 144 Q F0 .47
+(The maximum amount of virtual memory a)180 144 R -.25(va)-.2 G .47
+(ilable to the shell and, on some systems, to).25 F(its children)180 156
+Q F1<ad78>144 168 Q F0(The maximum number of \214le locks)180 168 Q F1
+<ad50>144 180 Q F0(The maximum number of pseudoterminals)180 180 Q F1
+<ad52>144 192 Q F0(The maximum time a real-time process can run before \
+blocking, in microseconds)180 192 Q F1<ad54>144 204 Q F0
+(The maximum number of threads)180 204 Q(If)144 220.8 Q/F2 10
+/Times-Italic@0 SF(limit)3.058 E F0 .468(is gi)3.648 F -.15(ve)-.25 G
+.468(n, and the).15 F F1<ad61>2.968 E F0 .468(option is not used,)2.968
+F F2(limit)2.968 E F0 .468(is the ne)2.968 F 2.968(wv)-.25 G .468
+(alue of the speci\214ed resource.)-3.218 F(If)5.468 E .045
+(no option is gi)144 232.8 R -.15(ve)-.25 G .045(n, then).15 F F1<ad66>
+2.545 E F0 .045(is assumed.)2.545 F -1.11(Va)5.045 G .045
+(lues are in 1024-byte increments, e)1.11 F .044(xcept for)-.15 F F1
+<ad74>2.544 E F0 2.544(,w)C .044(hich is)-2.544 F .67(in seconds;)144
+244.8 R F1<ad52>3.17 E F0 3.17(,w)C .67(hich is in microseconds;)-3.17 F
+F1<ad70>3.17 E F0 3.17(,w)C .67(hich is in units of 512-byte blocks;)
+-3.17 F F1<ad50>3.17 E F0(,)A F1<ad54>3.17 E F0(,)A F1<ad62>3.17 E F0(,)
+A F1<ad6b>144 256.8 Q F0(,)A F1<ad6e>3.737 E F0 3.737(,a)C(nd)-3.737 E
+F1<ad75>3.736 E F0 3.736(,w)C 1.236(hich are unscaled v)-3.736 F 1.236
+(alues; and, when in posix mode,)-.25 F F1<ad63>3.736 E F0(and)3.736 E
+F1<ad66>3.736 E F0 3.736(,w)C 1.236(hich are in)-3.736 F .238
+(512-byte increments.)144 268.8 R .238
+(The return status is 0 unless an in)5.238 F -.25(va)-.4 G .238
+(lid option or ar).25 F .238(gument is supplied, or an)-.18 F
+(error occurs while setting a ne)144 280.8 Q 2.5(wl)-.25 G(imit.)-2.5 E
+F1(umask)108 297.6 Q F0([)2.5 E F1<ad70>A F0 2.5(][)C F1<ad53>-2.5 E F0
+2.5(][)C F2(mode)-2.5 E F0(])A .18
+(The user \214le-creation mask is set to)144 309.6 R F2(mode)3.06 E F0
+5.18(.I).18 G(f)-5.18 E F2(mode)3.06 E F0(be)2.86 E .18
+(gins with a digit, it is interpreted as an octal)-.15 F .066(number; o\
+therwise it is interpreted as a symbolic mode mask similar to that acce\
+pted by)144 321.6 R F2 -.15(ch)2.566 G(mod).15 E F0(\(1\).).77 E(If)144
+333.6 Q F2(mode)3.263 E F0 .382(is omitted, the current v)3.063 F .382
+(alue of the mask is printed.)-.25 F(The)5.382 E F1<ad53>2.882 E F0 .382
+(option causes the mask to be)2.882 F .547
+(printed in symbolic form; the def)144 345.6 R .547
+(ault output is an octal number)-.1 F 5.547(.I)-.55 G 3.047(ft)-5.547 G
+(he)-3.047 E F1<ad70>3.047 E F0 .547(option is supplied, and)3.047 F F2
+(mode)144.38 357.6 Q F0 .552
+(is omitted, the output is in a form that may be reused as input.)3.232
+F .551(The return status is 0 if the)5.551 F(mode w)144 369.6 Q
+(as successfully changed or if no)-.1 E F2(mode)2.5 E F0(ar)2.5 E
+(gument w)-.18 E(as supplied, and f)-.1 E(alse otherwise.)-.1 E F1
+(unalias)108 386.4 Q F0<5bad>2.5 E F1(a)A F0 2.5(][)C F2(name)-2.5 E F0
+(...])2.5 E(Remo)144 398.4 Q 1.057 -.15(ve e)-.15 H(ach).15 E F2(name)
+3.257 E F0 .757(from the list of de\214ned aliases.)3.257 F(If)5.758 E
+F1<ad61>3.258 E F0 .758(is supplied, all alias de\214nitions are re-)
+3.258 F(mo)144 410.4 Q -.15(ve)-.15 G 2.5(d. The).15 F(return v)2.5 E
+(alue is true unless a supplied)-.25 E F2(name)2.86 E F0
+(is not a de\214ned alias.)2.68 E F1(unset)108 427.2 Q F0<5bad>2.5 E F1
+(fv)A F0 2.5(][)C<ad>-2.5 E F1(n)A F0 2.5(][)C F2(name)-2.5 E F0(...])
+2.5 E -.15(Fo)144 439.2 S 3.804(re).15 G(ach)-3.804 E F2(name)4.164 E F0
+3.804(,r).18 G(emo)-3.804 E 1.604 -.15(ve t)-.15 H 1.304
+(he corresponding v).15 F 1.303(ariable or function.)-.25 F 1.303
+(If the)6.303 F F1<ad76>3.803 E F0 1.303(option is gi)3.803 F -.15(ve)
+-.25 G 1.303(n, each).15 F F2(name)144.36 451.2 Q F0 .464
+(refers to a shell v)3.144 F .464(ariable, and that v)-.25 F .464
+(ariable is remo)-.25 F -.15(ve)-.15 G 2.965(d. Read-only).15 F -.25(va)
+2.965 G .465(riables may not be un-).25 F 2.769(set. If)144 463.2 R F1
+<ad66>2.769 E F0 .269(is speci\214ed, each)2.769 F F2(name)3.129 E F0
+.269(refers to a shell function, and the function de\214nition is remo)
+2.949 F -.15(ve)-.15 G(d.).15 E .403(If the)144 475.2 R F1<ad6e>2.903 E
+F0 .404(option is supplied, and)2.904 F F2(name)2.904 E F0 .404(is a v)
+2.904 F .404(ariable with the)-.25 F F2(namer)2.904 E(ef)-.37 E F0
+(attrib)2.904 E(ute,)-.2 E F2(name)2.904 E F0 .404(will be unset)2.904 F
+.72(rather than the v)144 487.2 R .72(ariable it references.)-.25 F F1
+<ad6e>5.72 E F0 .72(has no ef)3.22 F .719(fect if the)-.25 F F1<ad66>
+3.219 E F0 .719(option is supplied.)3.219 F .719(If no options)5.719 F
+.736(are supplied, each)144 499.2 R F2(name)3.236 E F0 .736
+(refers to a v)3.236 F .737(ariable; if there is no v)-.25 F .737
+(ariable by that name, a function with)-.25 F 1.762(that name, if an)144
+511.2 R 3.062 -.65(y, i)-.15 H 4.262(su).65 G 4.261(nset. Each)-4.262 F
+1.761(unset v)4.261 F 1.761(ariable or function is remo)-.25 F -.15(ve)
+-.15 G 4.261(df).15 G 1.761(rom the en)-4.261 F(vironment)-.4 E 3.171
+(passed to subsequent commands.)144 523.2 R 3.172(If an)8.172 F 5.672
+(yo)-.15 G(f)-5.672 E/F3 9/Times-Bold@0 SF -.27(BA)5.672 G(SH_ALIASES)
+.27 E/F4 9/Times-Roman@0 SF(,)A F3 -.27(BA)5.422 G(SH_ARGV0).27 E F4(,)A
+F3 -.27(BA)5.422 G(SH_CMDS).27 E F4(,)A F3 -.27(BA)144 535.2 S
+(SH_COMMAND).27 E F4(,)A F3 -.27(BA)11.482 G(SH_SUBSHELL).27 E F4(,)A F3
+-.27(BA)11.482 G(SHPID).27 E F4(,)A F3(COMP_W)11.482 E(ORDBREAKS)-.09 E
+F4(,)A F3(DIRST)11.481 E -.495(AC)-.81 G(K).495 E F4(,)A F3(EPOCHREAL)
+144 547.2 Q(TIME)-.828 E F4(,)A F3(EPOCHSECONDS)2.67 E F4(,)A F3(FUNCN)
+2.67 E(AME)-.18 E F4(,)A F3(GR)2.67 E(OUPS)-.27 E F4(,)A F3(HISTCMD)2.67
+E F4(,)A F3(LINENO)2.67 E F4(,)A F3(RANDOM)2.67 E F4(,)A F3(SECONDS)144
+559.2 Q F4(,)A F0(or)4.03 E F3(SRANDOM)4.28 E F0 1.779(are unset, the)
+4.03 F 4.279(yl)-.15 G 1.779(ose their special properties, e)-4.279 F
+-.15(ve)-.25 G 4.279(ni).15 G 4.279(ft)-4.279 G(he)-4.279 E 4.279(ya)
+-.15 G 1.779(re subse-)-4.279 F(quently reset.)144 571.2 Q(The e)5 E
+(xit status is true unless a)-.15 E F2(name)2.86 E F0(is readonly)2.68 E
+(.)-.65 E F1(wait)108 588 Q F0([)2.5 E F1(\255fn)A F0 2.5(][)C F1<ad70>
+-2.5 E F2(varname)2.5 E F0 2.5(][)C F2(id ...)-2.5 E F0(])A -.8(Wa)144
+600 S .659(it for each speci\214ed child process and return its termina\
+tion status.).8 F(Each)5.659 E F2(id)3.169 E F0 .659(may be a process)
+3.929 F .009(ID or a job speci\214cation; if a job spec is gi)144 612 R
+-.15(ve)-.25 G .008(n, all processes in that job').15 F 2.508(sp)-.55 G
+.008(ipeline are w)-2.508 F .008(aited for)-.1 F 5.008(.I)-.55 G(f)
+-5.008 E F2(id)144.01 624 Q F0 .441(is not gi)3.711 F -.15(ve)-.25 G(n,)
+.15 E F1(wait)2.941 E F0 -.1(wa)2.941 G .441
+(its for all running background jobs and the last-e).1 F -.15(xe)-.15 G
+.442(cuted process substitu-).15 F .598
+(tion, if its process id is the same as)144 636 R F1($!)3.098 E F0 3.098
+(,a)C .598(nd the return status is zero.)-3.098 F .597(If the)5.597 F F1
+<ad6e>3.097 E F0 .597(option is supplied,)3.097 F F1(wait)144 648 Q F0
+-.1(wa)3.082 G .583(its for a single job from the list of).1 F F2(id)
+3.083 E F0 3.083(so)C 1.383 -.4(r, i)-3.083 H 3.083(fn).4 G(o)-3.083 E
+F2(id)3.083 E F0 3.083(sa)C .583(re supplied, an)-3.083 F 3.083(yj)-.15
+G .583(ob, to complete and)-3.083 F .404(returns its e)144 660 R .404
+(xit status.)-.15 F .403(If none of the supplied ar)5.403 F .403
+(guments is a child of the shell, or if no ar)-.18 F(guments)-.18 E .572
+(are supplied and the shell has no unw)144 672 R .573
+(aited-for children, the e)-.1 F .573(xit status is 127.)-.15 F .573
+(If the)5.573 F F1<ad70>3.073 E F0 .573(option is)3.073 F .39
+(supplied, the process or job identi\214er of the job for which the e)
+144 684 R .39(xit status is returned is assigned to)-.15 F .905(the v)
+144 696 R(ariable)-.25 E F2(varname)3.405 E F0 .905
+(named by the option ar)3.405 F 3.405(gument. The)-.18 F -.25(va)3.405 G
+.905(riable will be unset initially).25 F 3.405(,b)-.65 G(efore)-3.405 E
+(an)144 708 Q 3.89(ya)-.15 G 3.89(ssignment. This)-3.89 F 1.39
+(is useful only when the)3.89 F F1<ad6e>3.89 E F0 1.39
+(option is supplied.)3.89 F 1.39(Supplying the)6.39 F F1<ad66>3.89 E F0
+(option,)3.89 E 1.461(when job control is enabled, forces)144 720 R F1
+(wait)3.961 E F0 1.461(to w)3.961 F 1.461(ait for)-.1 F F2(id)3.961 E F0
+1.462(to terminate before returning its status,)3.961 F(GNU Bash 5.0)72
+768 Q(2004 Apr 20)149.565 E(24)198.725 E 0 Cg EP
+%%Page: 25 25
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S(SH_B).35 E(UIL)-.1 E 87.61
+(TINS\(1\) General)-.92 F(Commands Manual)2.5 E -.35(BA)90.11 G(SH_B).35
+E(UIL)-.1 E(TINS\(1\))-.92 E .149
+(instead of returning when it changes status.)144 84 R(If)5.149 E/F1 10
+/Times-Italic@0 SF(id)2.659 E F0 .149(speci\214es a non-e)3.419 F .148
+(xistent process or job, the return)-.15 F(status is 127.)144 96 Q
+(Otherwise, the return status is the e)5 E
+(xit status of the last process or job w)-.15 E(aited for)-.1 E(.)-.55 E
+/F2 10.95/Times-Bold@0 SF(SHELL COMP)72 112.8 Q -1.04(AT)-.81 G
+(IBILITY MODE)1.04 E F0 .911
+(Bash-4.0 introduced the concept of a `shell compatibility le)108 124.8
+R -.15(ve)-.25 G .912(l', speci\214ed as a set of options to the shopt)
+.15 F -.2(bu)108 136.8 S(iltin).2 E/F3 10/Times-Bold@0 SF(compat31)3.378
+E F0(,)A F3(compat32)3.378 E F0(,)A F3(compat40)3.378 E F0(,)A F3
+(compat41)3.378 E F0 3.378(,a)C .878(nd so on\).)-3.378 F .877
+(There is only one current compatibility)5.878 F(le)108 148.8 Q -.15(ve)
+-.25 G 3.253(l-).15 G 3.253(-e)-3.253 G .753(ach option is mutually e)
+-3.253 F(xclusi)-.15 E -.15(ve)-.25 G 5.753(.T).15 G .753
+(he compatibility le)-5.753 F -.15(ve)-.25 G 3.254(li).15 G 3.254(si)
+-3.254 G .754(ntended to allo)-3.254 F 3.254(wu)-.25 G .754
+(sers to select be-)-3.254 F(ha)108 160.8 Q 1.084(vior from pre)-.2 F
+1.084(vious v)-.25 F 1.083(ersions that is incompatible with ne)-.15 F
+1.083(wer v)-.25 F 1.083(ersions while the)-.15 F 3.583(ym)-.15 G 1.083
+(igrate scripts to use)-3.583 F(current features and beha)108 172.8 Q
+(vior)-.2 E 2.5(.I)-.55 G(t')-2.5 E 2.5(si)-.55 G
+(ntended to be a temporary solution.)-2.5 E 1.456
+(This section does not mention beha)108 189.6 R 1.457
+(vior that is standard for a particular v)-.2 F 1.457
+(ersion \(e.g., setting)-.15 F F3(compat32)3.957 E F0 .887
+(means that quoting the rhs of the re)108 201.6 R(ge)-.15 E .886
+(xp matching operator quotes special re)-.15 F(ge)-.15 E .886
+(xp characters in the w)-.15 F(ord,)-.1 E(which is def)108 213.6 Q
+(ault beha)-.1 E(vior in bash-3.2 and abo)-.2 E -.15(ve)-.15 G(\).).15 E
+.522(If a user enables, say)108 230.4 R(,)-.65 E F3(compat32)3.023 E F0
+3.023(,i)C 3.023(tm)-3.023 G .523(ay af)-3.023 F .523(fect the beha)-.25
+F .523(vior of other compatibility le)-.2 F -.15(ve)-.25 G .523
+(ls up to and includ-).15 F .26(ing the current compatibility le)108
+242.4 R -.15(ve)-.25 G 2.76(l. The).15 F .259
+(idea is that each compatibility le)2.759 F -.15(ve)-.25 G 2.759(lc).15
+G .259(ontrols beha)-2.759 F .259(vior that changed)-.2 F 1.645
+(in that v)108 254.4 R 1.646(ersion of)-.15 F F3(bash)4.146 E F0 4.146
+(,b)C 1.646(ut that beha)-4.346 F 1.646(vior may ha)-.2 F 1.946 -.15
+(ve b)-.2 H 1.646(een present in earlier v).15 F 4.146(ersions. F)-.15 F
+1.646(or instance, the)-.15 F .761
+(change to use locale-based comparisons with the)108 266.4 R F3([[)3.261
+E F0 .76(command came in bash-4.1, and earlier v)3.261 F .76
+(ersions used)-.15 F 1.904(ASCII-based comparisons, so enabling)108
+278.4 R F3(compat32)4.404 E F0 1.905
+(will enable ASCII-based comparisons as well.)4.404 F(That)6.905 E .296
+(granularity may not be suf)108 290.4 R .296
+(\214cient for all uses, and as a result users should emplo)-.25 F 2.796
+(yc)-.1 G .295(ompatibility le)-2.796 F -.15(ve)-.25 G .295(ls care-).15
+F(fully)108 302.4 Q 5(.R)-.65 G(ead the documentation for a particular \
+feature to \214nd out the current beha)-5 E(vior)-.2 E(.)-.55 E .531
+(Bash-4.3 introduced a ne)108 319.2 R 3.031(ws)-.25 G .531(hell v)-3.031
+F(ariable:)-.25 E/F4 9/Times-Bold@0 SF -.27(BA)3.031 G(SH_COMP).27 E
+-.855(AT)-.666 G/F5 9/Times-Roman@0 SF(.).855 E F0 .531(The v)5.031 F
+.531(alue assigned to this v)-.25 F .532(ariable \(a decimal)-.25 F -.15
+(ve)108 331.2 S .108(rsion number lik).15 F 2.608(e4)-.1 G .108
+(.2, or an inte)-2.608 F .108(ger corresponding to the)-.15 F F3(compat)
+2.607 E F1(NN)A F0 .107(option, lik)2.607 F 2.607(e4)-.1 G .107
+(2\) determines the com-)-2.607 F(patibility le)108 343.2 Q -.15(ve)-.25
+G(l.).15 E .387(Starting with bash-4.4, Bash has be)108 360 R .388
+(gun deprecating older compatibility le)-.15 F -.15(ve)-.25 G 2.888
+(ls. Ev).15 F(entually)-.15 E 2.888(,t)-.65 G .388(he options will)
+-2.888 F(be remo)108 372 Q -.15(ve)-.15 G 2.5(di).15 G 2.5(nf)-2.5 G -.2
+(avo)-2.6 G 2.5(ro).2 G(f)-2.5 E F4 -.27(BA)2.5 G(SH_COMP).27 E -.855
+(AT)-.666 G F5(.).855 E F0 1.164(Bash-5.0 is the \214nal v)108 388.8 R
+1.164(ersion for which there will be an indi)-.15 F 1.163
+(vidual shopt option for the pre)-.25 F 1.163(vious v)-.25 F(ersion.)
+-.15 E(Users should use)108 400.8 Q F4 -.27(BA)2.5 G(SH_COMP).27 E -.855
+(AT)-.666 G F0(on bash-5.0 and later v)3.105 E(ersions.)-.15 E 1.613
+(The follo)108 417.6 R 1.613(wing table describes the beha)-.25 F 1.613
+(vior changes controlled by each compatibility le)-.2 F -.15(ve)-.25 G
+4.113(ls).15 G 4.114(etting. The)-4.113 F F3(compat)108 429.6 Q F1(NN)A
+F0 1.186(tag is used as shorthand for setting the compatibility le)3.686
+F -.15(ve)-.25 G 3.686(lt).15 G(o)-3.686 E F1(NN)3.686 E F0 1.186
+(using one of the follo)3.686 F(wing)-.25 E 3.806(mechanisms. F)108
+441.6 R 1.306(or v)-.15 F 1.306
+(ersions prior to bash-5.0, the compatibility le)-.15 F -.15(ve)-.25 G
+3.807(lm).15 G 1.307(ay be set using the corresponding)-3.807 F F3
+(compat)108 453.6 Q F1(NN)A F0 .502(shopt option.)3.002 F -.15(Fo)5.502
+G 3.002(rb).15 G .502(ash-4.3 and later v)-3.002 F .502(ersions, the)
+-.15 F F4 -.27(BA)3.002 G(SH_COMP).27 E -.855(AT)-.666 G F0 -.25(va)
+3.607 G .502(riable is preferred, and it).25 F
+(is required for bash-5.1 and later v)108 465.6 Q(ersions.)-.15 E F3
+(compat31)108 482.4 Q F0<83>144 494.4 Q(quoting the rhs of the)180 494.4
+Q F3([[)2.5 E F0(command')2.5 E 2.5(sr)-.55 G -.15(eg)-2.5 G -.15(ex).15
+G 2.5(pm).15 G(atching operator \(=~\) has no special ef)-2.5 E(fect)
+-.25 E F3(compat32)108 511.2 Q F0<83>144 523.2 Q .35
+(interrupting a command list such as "a ; b ; c" causes the e)180 523.2
+R -.15(xe)-.15 G .35(cution of the ne).15 F .35(xt command)-.15 F .018
+(in the list \(in bash-4.0 and later v)180 535.2 R .018
+(ersions, the shell acts as if it recei)-.15 F -.15(ve)-.25 G 2.517(dt)
+.15 G .017(he interrupt, so in-)-2.517 F
+(terrupting one command in a list aborts the e)180 547.2 Q -.15(xe)-.15
+G(cution of the entire list\)).15 E F3(compat40)108 564 Q F0<83>144 576
+Q(the)180 576 Q F3(<)2.673 E F0(and)2.673 E F3(>)2.673 E F0 .173
+(operators to the)2.673 F F3([[)2.673 E F0 .173
+(command do not consider the current locale when compar)2.673 F(-)-.2 E
+.068(ing strings; the)180 588 R 2.568(yu)-.15 G .068(se ASCII ordering.)
+-2.568 F .068(Bash v)5.068 F .067
+(ersions prior to bash-4.1 use ASCII collation)-.15 F(and)180 600 Q F1
+(str)4.742 E(cmp)-.37 E F0 1.902
+(\(3\); bash-4.1 and later use the current locale').19 F 4.403(sc)-.55 G
+1.903(ollation sequence and)-4.403 F F1(str)4.743 E(-)-.2 E(coll)180 612
+Q F0(\(3\).).51 E F3(compat41)108 628.8 Q F0<83>144 640.8 Q(in)180 640.8
+Q F1(posix)3.79 E F0(mode,)3.79 E F3(time)3.79 E F0 1.29(may be follo)
+3.79 F 1.29(wed by options and still be recognized as a reserv)-.25 F
+(ed)-.15 E -.1(wo)180 652.8 S(rd \(this is POSIX interpretation 267\)).1
+E<83>144 664.8 Q(in)180 664.8 Q F1(posix)2.708 E F0 .208
+(mode, the parser requires that an e)2.708 F -.15(ve)-.25 G 2.708(nn).15
+G .208(umber of single quotes occur in the)-2.708 F F1(wor)2.709 E(d)
+-.37 E F0 .282(portion of a double-quoted parameter e)180 676.8 R .282
+(xpansion and treats them specially)-.15 F 2.781(,s)-.65 G 2.781(ot)
+-2.781 G .281(hat charac-)-2.781 F(ters within the single quotes are co\
+nsidered quoted \(this is POSIX interpretation 221\))180 688.8 Q F3
+(compat42)108 705.6 Q F0<83>144 717.6 Q 1.055(the replacement string in\
+ double-quoted pattern substitution does not under)180 717.6 R 1.056
+(go quote re-)-.18 F(mo)180 729.6 Q -.25(va)-.15 G(l, as it does in v)
+.25 E(ersions after bash-4.2)-.15 E(GNU Bash 5.0)72 768 Q(2004 Apr 20)
+149.565 E(25)198.725 E 0 Cg EP
+%%Page: 26 26
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF -.35(BA)72 48 S(SH_B).35 E(UIL)-.1 E 87.61
+(TINS\(1\) General)-.92 F(Commands Manual)2.5 E -.35(BA)90.11 G(SH_B).35
+E(UIL)-.1 E(TINS\(1\))-.92 E<83>144 84 Q .021
+(in posix mode, single quotes are considered special when e)180 84 R
+.021(xpanding the)-.15 F/F1 10/Times-Italic@0 SF(wor)2.52 E(d)-.37 E F0
+.02(portion of a)2.52 F .017(double-quoted parameter e)180 96 R .017
+(xpansion and can be used to quote a closing brace or other spe-)-.15 F
+.999(cial character \(this is part of POSIX interpretation 221\); in la\
+ter v)180 108 R .998(ersions, single quotes)-.15 F
+(are not special within double-quoted w)180 120 Q(ord e)-.1 E(xpansions)
+-.15 E/F2 10/Times-Bold@0 SF(compat43)108 136.8 Q F0<83>144 148.8 Q 1.07
+(the shell does not print a w)180 148.8 R 1.071
+(arning message if an attempt is made to use a quoted com-)-.1 F .249
+(pound assignment as an ar)180 160.8 R .248
+(gument to declare \(declare -a foo='\(1 2\)'\). Later v)-.18 F .248
+(ersions w)-.15 F(arn)-.1 E(that this usage is deprecated)180 172.8 Q
+<83>144 184.8 Q -.1(wo)180 184.8 S .5(rd e).1 F .501
+(xpansion errors are considered non-f)-.15 F .501
+(atal errors that cause the current command to)-.1 F -.1(fa)180 196.8 S
+.605(il, e).1 F -.15(ve)-.25 G 3.105(ni).15 G 3.105(np)-3.105 G .605
+(osix mode \(the def)-3.105 F .605(ault beha)-.1 F .605(vior is to mak)
+-.2 F 3.105(et)-.1 G .605(hem f)-3.105 F .605
+(atal errors that cause the)-.1 F(shell to e)180 208.8 Q(xit\))-.15 E
+<83>144 220.8 Q .354(when e)180 220.8 R -.15(xe)-.15 G .354
+(cuting a shell function, the loop state \(while/until/etc.\)).15 F .355
+(is not reset, so)5.354 F F2(br)2.855 E(eak)-.18 E F0(or)2.855 E F2
+(continue)180 232.8 Q F0 .052
+(in that function will break or continue loops in the calling conte)
+2.553 F .052(xt. Bash-4.4 and)-.15 F(later reset the loop state to pre)
+180 244.8 Q -.15(ve)-.25 G(nt this).15 E F2(compat44)108 261.6 Q F0<83>
+144 273.6 Q .719(the shell sets up the v)180 273.6 R .719(alues used by)
+-.25 F/F3 9/Times-Bold@0 SF -.27(BA)3.219 G(SH_ARGV).27 E F0(and)2.969 E
+F3 -.27(BA)3.219 G(SH_ARGC).27 E F0 .719(so the)2.969 F 3.219(yc)-.15 G
+.719(an e)-3.219 F(xpand)-.15 E(to the shell')180 285.6 Q 2.5(sp)-.55 G
+(ositional parameters e)-2.5 E -.15(ve)-.25 G 2.5(ni).15 G 2.5(fe)-2.5 G
+(xtended deb)-2.65 E(ugging mode is not enabled)-.2 E<83>144 297.6 Q
+2.635(as)180 297.6 S .135(ubshell inherits loops from its parent conte)
+-2.635 F .135(xt, so)-.15 F F2(br)2.635 E(eak)-.18 E F0(or)2.635 E F2
+(continue)2.634 E F0 .134(will cause the sub-)2.634 F(shell to e)180
+309.6 Q 2.5(xit. Bash-5.0)-.15 F(and later reset the loop state to pre)
+2.5 E -.15(ve)-.25 G(nt the e).15 E(xit)-.15 E<83>144 321.6 Q -.25(va)
+180 321.6 S .618(riable assignments preceding b).25 F .618(uiltins lik)
+-.2 F(e)-.1 E F2(export)3.118 E F0(and)3.118 E F2 -.18(re)3.118 G
+(adonly).18 E F0 .618(that set attrib)3.118 F .619(utes con-)-.2 F .12
+(tinue to af)180 333.6 R .12(fect v)-.25 F .119
+(ariables with the same name in the calling en)-.25 F .119(vironment e)
+-.4 F -.15(ve)-.25 G 2.619(ni).15 G 2.619(ft)-2.619 G .119(he shell is)
+-2.619 F(not in posix mode)180 345.6 Q F2(compat50)108 362.4 Q F0<83>144
+374.4 Q 1.209(Bash-5.1 changed the w)180 374.4 R(ay)-.1 E F3($RANDOM)
+3.709 E F0 1.209(is generated to introduce slightly more random-)3.459 F
+1.019(ness. If the shell compatibility le)180 386.4 R -.15(ve)-.25 G
+3.518(li).15 G 3.518(ss)-3.518 G 1.018(et to 50 or lo)-3.518 F(wer)-.25
+E 3.518(,i)-.4 G 3.518(tr)-3.518 G -2.15 -.25(ev e)-3.518 H 1.018
+(rts to the method from).25 F .732(bash-5.0 and pre)180 398.4 R .732
+(vious v)-.25 F .733
+(ersions, so seeding the random number generator by assigning a)-.15 F
+-.25(va)180 410.4 S(lue to).25 E F3(RANDOM)2.5 E F0
+(will produce the same sequence as in bash-5.0)2.25 E<83>144 422.4 Q
+.696(If the command hash table is empty)180 422.4 R 3.196(,b)-.65 G .696
+(ash v)-3.196 F .695(ersions prior to bash-5.1 printed an informa-)-.15
+F 1.32(tional message to that ef)180 434.4 R 1.321(fect, e)-.25 F -.15
+(ve)-.25 G 3.821(nw).15 G 1.321
+(hen producing output that can be reused as input.)-3.821 F
+(Bash-5.1 suppresses that message when the)180 446.4 Q F2<ad6c>2.5 E F0
+(option is supplied.)2.5 E/F4 10.95/Times-Bold@0 SF(SEE ALSO)72 463.2 Q
+F0(bash\(1\), sh\(1\))108 475.2 Q(GNU Bash 5.0)72 768 Q(2004 Apr 20)
+149.565 E(26)198.725 E 0 Cg EP
+%%Trailer
+end
+%%EOF
diff --git a/doc/fdl.texi b/doc/fdl.texi
new file mode 100644
index 0000000..8805f1a
--- /dev/null
+++ b/doc/fdl.texi
@@ -0,0 +1,506 @@
+@c The GNU Free Documentation License.
+@center Version 1.3, 3 November 2008
+
+@c This file is intended to be included within another document,
+@c hence no sectioning command or @node.
+
+@display
+Copyright @copyright{} 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc.
+@uref{http://fsf.org/}
+
+Everyone is permitted to copy and distribute verbatim copies
+of this license document, but changing it is not allowed.
+@end display
+
+@enumerate 0
+@item
+PREAMBLE
+
+The purpose of this License is to make a manual, textbook, or other
+functional and useful document @dfn{free} in the sense of freedom: to
+assure everyone the effective freedom to copy and redistribute it,
+with or without modifying it, either commercially or noncommercially.
+Secondarily, this License preserves for the author and publisher a way
+to get credit for their work, while not being considered responsible
+for modifications made by others.
+
+This License is a kind of ``copyleft'', which means that derivative
+works of the document must themselves be free in the same sense.  It
+complements the GNU General Public License, which is a copyleft
+license designed for free software.
+
+We have designed this License in order to use it for manuals for free
+software, because free software needs free documentation: a free
+program should come with manuals providing the same freedoms that the
+software does.  But this License is not limited to software manuals;
+it can be used for any textual work, regardless of subject matter or
+whether it is published as a printed book.  We recommend this License
+principally for works whose purpose is instruction or reference.
+
+@item
+APPLICABILITY AND DEFINITIONS
+
+This License applies to any manual or other work, in any medium, that
+contains a notice placed by the copyright holder saying it can be
+distributed under the terms of this License.  Such a notice grants a
+world-wide, royalty-free license, unlimited in duration, to use that
+work under the conditions stated herein.  The ``Document'', below,
+refers to any such manual or work.  Any member of the public is a
+licensee, and is addressed as ``you''.  You accept the license if you
+copy, modify or distribute the work in a way requiring permission
+under copyright law.
+
+A ``Modified Version'' of the Document means any work containing the
+Document or a portion of it, either copied verbatim, or with
+modifications and/or translated into another language.
+
+A ``Secondary Section'' is a named appendix or a front-matter section
+of the Document that deals exclusively with the relationship of the
+publishers or authors of the Document to the Document's overall
+subject (or to related matters) and contains nothing that could fall
+directly within that overall subject.  (Thus, if the Document is in
+part a textbook of mathematics, a Secondary Section may not explain
+any mathematics.)  The relationship could be a matter of historical
+connection with the subject or with related matters, or of legal,
+commercial, philosophical, ethical or political position regarding
+them.
+
+The ``Invariant Sections'' are certain Secondary Sections whose titles
+are designated, as being those of Invariant Sections, in the notice
+that says that the Document is released under this License.  If a
+section does not fit the above definition of Secondary then it is not
+allowed to be designated as Invariant.  The Document may contain zero
+Invariant Sections.  If the Document does not identify any Invariant
+Sections then there are none.
+
+The ``Cover Texts'' are certain short passages of text that are listed,
+as Front-Cover Texts or Back-Cover Texts, in the notice that says that
+the Document is released under this License.  A Front-Cover Text may
+be at most 5 words, and a Back-Cover Text may be at most 25 words.
+
+A ``Transparent'' copy of the Document means a machine-readable copy,
+represented in a format whose specification is available to the
+general public, that is suitable for revising the document
+straightforwardly with generic text editors or (for images composed of
+pixels) generic paint programs or (for drawings) some widely available
+drawing editor, and that is suitable for input to text formatters or
+for automatic translation to a variety of formats suitable for input
+to text formatters.  A copy made in an otherwise Transparent file
+format whose markup, or absence of markup, has been arranged to thwart
+or discourage subsequent modification by readers is not Transparent.
+An image format is not Transparent if used for any substantial amount
+of text.  A copy that is not ``Transparent'' is called ``Opaque''.
+
+Examples of suitable formats for Transparent copies include plain
+@sc{ascii} without markup, Texinfo input format, La@TeX{} input
+format, @acronym{SGML} or @acronym{XML} using a publicly available
+@acronym{DTD}, and standard-conforming simple @acronym{HTML},
+PostScript or @acronym{PDF} designed for human modification.  Examples
+of transparent image formats include @acronym{PNG}, @acronym{XCF} and
+@acronym{JPG}.  Opaque formats include proprietary formats that can be
+read and edited only by proprietary word processors, @acronym{SGML} or
+@acronym{XML} for which the @acronym{DTD} and/or processing tools are
+not generally available, and the machine-generated @acronym{HTML},
+PostScript or @acronym{PDF} produced by some word processors for
+output purposes only.
+
+The ``Title Page'' means, for a printed book, the title page itself,
+plus such following pages as are needed to hold, legibly, the material
+this License requires to appear in the title page.  For works in
+formats which do not have any title page as such, ``Title Page'' means
+the text near the most prominent appearance of the work's title,
+preceding the beginning of the body of the text.
+
+The ``publisher'' means any person or entity that distributes copies
+of the Document to the public.
+
+A section ``Entitled XYZ'' means a named subunit of the Document whose
+title either is precisely XYZ or contains XYZ in parentheses following
+text that translates XYZ in another language.  (Here XYZ stands for a
+specific section name mentioned below, such as ``Acknowledgements'',
+``Dedications'', ``Endorsements'', or ``History''.)  To ``Preserve the Title''
+of such a section when you modify the Document means that it remains a
+section ``Entitled XYZ'' according to this definition.
+
+The Document may include Warranty Disclaimers next to the notice which
+states that this License applies to the Document.  These Warranty
+Disclaimers are considered to be included by reference in this
+License, but only as regards disclaiming warranties: any other
+implication that these Warranty Disclaimers may have is void and has
+no effect on the meaning of this License.
+
+@item
+VERBATIM COPYING
+
+You may copy and distribute the Document in any medium, either
+commercially or noncommercially, provided that this License, the
+copyright notices, and the license notice saying this License applies
+to the Document are reproduced in all copies, and that you add no other
+conditions whatsoever to those of this License.  You may not use
+technical measures to obstruct or control the reading or further
+copying of the copies you make or distribute.  However, you may accept
+compensation in exchange for copies.  If you distribute a large enough
+number of copies you must also follow the conditions in section 3.
+
+You may also lend copies, under the same conditions stated above, and
+you may publicly display copies.
+
+@item
+COPYING IN QUANTITY
+
+If you publish printed copies (or copies in media that commonly have
+printed covers) of the Document, numbering more than 100, and the
+Document's license notice requires Cover Texts, you must enclose the
+copies in covers that carry, clearly and legibly, all these Cover
+Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on
+the back cover.  Both covers must also clearly and legibly identify
+you as the publisher of these copies.  The front cover must present
+the full title with all words of the title equally prominent and
+visible.  You may add other material on the covers in addition.
+Copying with changes limited to the covers, as long as they preserve
+the title of the Document and satisfy these conditions, can be treated
+as verbatim copying in other respects.
+
+If the required texts for either cover are too voluminous to fit
+legibly, you should put the first ones listed (as many as fit
+reasonably) on the actual cover, and continue the rest onto adjacent
+pages.
+
+If you publish or distribute Opaque copies of the Document numbering
+more than 100, you must either include a machine-readable Transparent
+copy along with each Opaque copy, or state in or with each Opaque copy
+a computer-network location from which the general network-using
+public has access to download using public-standard network protocols
+a complete Transparent copy of the Document, free of added material.
+If you use the latter option, you must take reasonably prudent steps,
+when you begin distribution of Opaque copies in quantity, to ensure
+that this Transparent copy will remain thus accessible at the stated
+location until at least one year after the last time you distribute an
+Opaque copy (directly or through your agents or retailers) of that
+edition to the public.
+
+It is requested, but not required, that you contact the authors of the
+Document well before redistributing any large number of copies, to give
+them a chance to provide you with an updated version of the Document.
+
+@item
+MODIFICATIONS
+
+You may copy and distribute a Modified Version of the Document under
+the conditions of sections 2 and 3 above, provided that you release
+the Modified Version under precisely this License, with the Modified
+Version filling the role of the Document, thus licensing distribution
+and modification of the Modified Version to whoever possesses a copy
+of it.  In addition, you must do these things in the Modified Version:
+
+@enumerate A
+@item
+Use in the Title Page (and on the covers, if any) a title distinct
+from that of the Document, and from those of previous versions
+(which should, if there were any, be listed in the History section
+of the Document).  You may use the same title as a previous version
+if the original publisher of that version gives permission.
+
+@item
+List on the Title Page, as authors, one or more persons or entities
+responsible for authorship of the modifications in the Modified
+Version, together with at least five of the principal authors of the
+Document (all of its principal authors, if it has fewer than five),
+unless they release you from this requirement.
+
+@item
+State on the Title page the name of the publisher of the
+Modified Version, as the publisher.
+
+@item
+Preserve all the copyright notices of the Document.
+
+@item
+Add an appropriate copyright notice for your modifications
+adjacent to the other copyright notices.
+
+@item
+Include, immediately after the copyright notices, a license notice
+giving the public permission to use the Modified Version under the
+terms of this License, in the form shown in the Addendum below.
+
+@item
+Preserve in that license notice the full lists of Invariant Sections
+and required Cover Texts given in the Document's license notice.
+
+@item
+Include an unaltered copy of this License.
+
+@item
+Preserve the section Entitled ``History'', Preserve its Title, and add
+to it an item stating at least the title, year, new authors, and
+publisher of the Modified Version as given on the Title Page.  If
+there is no section Entitled ``History'' in the Document, create one
+stating the title, year, authors, and publisher of the Document as
+given on its Title Page, then add an item describing the Modified
+Version as stated in the previous sentence.
+
+@item
+Preserve the network location, if any, given in the Document for
+public access to a Transparent copy of the Document, and likewise
+the network locations given in the Document for previous versions
+it was based on.  These may be placed in the ``History'' section.
+You may omit a network location for a work that was published at
+least four years before the Document itself, or if the original
+publisher of the version it refers to gives permission.
+
+@item
+For any section Entitled ``Acknowledgements'' or ``Dedications'', Preserve
+the Title of the section, and preserve in the section all the
+substance and tone of each of the contributor acknowledgements and/or
+dedications given therein.
+
+@item
+Preserve all the Invariant Sections of the Document,
+unaltered in their text and in their titles.  Section numbers
+or the equivalent are not considered part of the section titles.
+
+@item
+Delete any section Entitled ``Endorsements''.  Such a section
+may not be included in the Modified Version.
+
+@item
+Do not retitle any existing section to be Entitled ``Endorsements'' or
+to conflict in title with any Invariant Section.
+
+@item
+Preserve any Warranty Disclaimers.
+@end enumerate
+
+If the Modified Version includes new front-matter sections or
+appendices that qualify as Secondary Sections and contain no material
+copied from the Document, you may at your option designate some or all
+of these sections as invariant.  To do this, add their titles to the
+list of Invariant Sections in the Modified Version's license notice.
+These titles must be distinct from any other section titles.
+
+You may add a section Entitled ``Endorsements'', provided it contains
+nothing but endorsements of your Modified Version by various
+parties---for example, statements of peer review or that the text has
+been approved by an organization as the authoritative definition of a
+standard.
+
+You may add a passage of up to five words as a Front-Cover Text, and a
+passage of up to 25 words as a Back-Cover Text, to the end of the list
+of Cover Texts in the Modified Version.  Only one passage of
+Front-Cover Text and one of Back-Cover Text may be added by (or
+through arrangements made by) any one entity.  If the Document already
+includes a cover text for the same cover, previously added by you or
+by arrangement made by the same entity you are acting on behalf of,
+you may not add another; but you may replace the old one, on explicit
+permission from the previous publisher that added the old one.
+
+The author(s) and publisher(s) of the Document do not by this License
+give permission to use their names for publicity for or to assert or
+imply endorsement of any Modified Version.
+
+@item
+COMBINING DOCUMENTS
+
+You may combine the Document with other documents released under this
+License, under the terms defined in section 4 above for modified
+versions, provided that you include in the combination all of the
+Invariant Sections of all of the original documents, unmodified, and
+list them all as Invariant Sections of your combined work in its
+license notice, and that you preserve all their Warranty Disclaimers.
+
+The combined work need only contain one copy of this License, and
+multiple identical Invariant Sections may be replaced with a single
+copy.  If there are multiple Invariant Sections with the same name but
+different contents, make the title of each such section unique by
+adding at the end of it, in parentheses, the name of the original
+author or publisher of that section if known, or else a unique number.
+Make the same adjustment to the section titles in the list of
+Invariant Sections in the license notice of the combined work.
+
+In the combination, you must combine any sections Entitled ``History''
+in the various original documents, forming one section Entitled
+``History''; likewise combine any sections Entitled ``Acknowledgements'',
+and any sections Entitled ``Dedications''.  You must delete all
+sections Entitled ``Endorsements.''
+
+@item
+COLLECTIONS OF DOCUMENTS
+
+You may make a collection consisting of the Document and other documents
+released under this License, and replace the individual copies of this
+License in the various documents with a single copy that is included in
+the collection, provided that you follow the rules of this License for
+verbatim copying of each of the documents in all other respects.
+
+You may extract a single document from such a collection, and distribute
+it individually under this License, provided you insert a copy of this
+License into the extracted document, and follow this License in all
+other respects regarding verbatim copying of that document.
+
+@item
+AGGREGATION WITH INDEPENDENT WORKS
+
+A compilation of the Document or its derivatives with other separate
+and independent documents or works, in or on a volume of a storage or
+distribution medium, is called an ``aggregate'' if the copyright
+resulting from the compilation is not used to limit the legal rights
+of the compilation's users beyond what the individual works permit.
+When the Document is included in an aggregate, this License does not
+apply to the other works in the aggregate which are not themselves
+derivative works of the Document.
+
+If the Cover Text requirement of section 3 is applicable to these
+copies of the Document, then if the Document is less than one half of
+the entire aggregate, the Document's Cover Texts may be placed on
+covers that bracket the Document within the aggregate, or the
+electronic equivalent of covers if the Document is in electronic form.
+Otherwise they must appear on printed covers that bracket the whole
+aggregate.
+
+@item
+TRANSLATION
+
+Translation is considered a kind of modification, so you may
+distribute translations of the Document under the terms of section 4.
+Replacing Invariant Sections with translations requires special
+permission from their copyright holders, but you may include
+translations of some or all Invariant Sections in addition to the
+original versions of these Invariant Sections.  You may include a
+translation of this License, and all the license notices in the
+Document, and any Warranty Disclaimers, provided that you also include
+the original English version of this License and the original versions
+of those notices and disclaimers.  In case of a disagreement between
+the translation and the original version of this License or a notice
+or disclaimer, the original version will prevail.
+
+If a section in the Document is Entitled ``Acknowledgements'',
+``Dedications'', or ``History'', the requirement (section 4) to Preserve
+its Title (section 1) will typically require changing the actual
+title.
+
+@item
+TERMINATION
+
+You may not copy, modify, sublicense, or distribute the Document
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense, or distribute it is void, and
+will automatically terminate your rights under this License.
+
+However, if you cease all violation of this License, then your license
+from a particular copyright holder is reinstated (a) provisionally,
+unless and until the copyright holder explicitly and finally
+terminates your license, and (b) permanently, if the copyright holder
+fails to notify you of the violation by some reasonable means prior to
+60 days after the cessation.
+
+Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, receipt of a copy of some or all of the same material does
+not give you any rights to use it.
+
+@item
+FUTURE REVISIONS OF THIS LICENSE
+
+The Free Software Foundation may publish new, revised versions
+of the GNU Free Documentation License from time to time.  Such new
+versions will be similar in spirit to the present version, but may
+differ in detail to address new problems or concerns.  See
+@uref{http://www.gnu.org/copyleft/}.
+
+Each version of the License is given a distinguishing version number.
+If the Document specifies that a particular numbered version of this
+License ``or any later version'' applies to it, you have the option of
+following the terms and conditions either of that specified version or
+of any later version that has been published (not as a draft) by the
+Free Software Foundation.  If the Document does not specify a version
+number of this License, you may choose any version ever published (not
+as a draft) by the Free Software Foundation.  If the Document
+specifies that a proxy can decide which future versions of this
+License can be used, that proxy's public statement of acceptance of a
+version permanently authorizes you to choose that version for the
+Document.
+
+@item
+RELICENSING
+
+``Massive Multiauthor Collaboration Site'' (or ``MMC Site'') means any
+World Wide Web server that publishes copyrightable works and also
+provides prominent facilities for anybody to edit those works.  A
+public wiki that anybody can edit is an example of such a server.  A
+``Massive Multiauthor Collaboration'' (or ``MMC'') contained in the
+site means any set of copyrightable works thus published on the MMC
+site.
+
+``CC-BY-SA'' means the Creative Commons Attribution-Share Alike 3.0
+license published by Creative Commons Corporation, a not-for-profit
+corporation with a principal place of business in San Francisco,
+California, as well as future copyleft versions of that license
+published by that same organization.
+
+``Incorporate'' means to publish or republish a Document, in whole or
+in part, as part of another Document.
+
+An MMC is ``eligible for relicensing'' if it is licensed under this
+License, and if all works that were first published under this License
+somewhere other than this MMC, and subsequently incorporated in whole
+or in part into the MMC, (1) had no cover texts or invariant sections,
+and (2) were thus incorporated prior to November 1, 2008.
+
+The operator of an MMC Site may republish an MMC contained in the site
+under CC-BY-SA on the same site at any time before August 1, 2009,
+provided the MMC is eligible for relicensing.
+
+@end enumerate
+
+@page
+@heading ADDENDUM: How to use this License for your documents
+
+To use this License in a document you have written, include a copy of
+the License in the document and put the following copyright and
+license notices just after the title page:
+
+@smallexample
+@group
+  Copyright (C)  @var{year}  @var{your name}.
+  Permission is granted to copy, distribute and/or modify this document
+  under the terms of the GNU Free Documentation License, Version 1.3
+  or any later version published by the Free Software Foundation;
+  with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
+  Texts.  A copy of the license is included in the section entitled ``GNU
+  Free Documentation License''.
+@end group
+@end smallexample
+
+If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts,
+replace the ``with@dots{}Texts.'' line with this:
+
+@smallexample
+@group
+    with the Invariant Sections being @var{list their titles}, with
+    the Front-Cover Texts being @var{list}, and with the Back-Cover Texts
+    being @var{list}.
+@end group
+@end smallexample
+
+If you have Invariant Sections without Cover Texts, or some other
+combination of the three, merge those two alternatives to suit the
+situation.
+
+If your document contains nontrivial examples of program code, we
+recommend releasing these examples in parallel under your choice of
+free software license, such as the GNU General Public License,
+to permit their use in free software.
+
+@c Local Variables:
+@c ispell-local-pdict: "ispell-dict"
+@c End:
+
diff --git a/doc/fdl.txt b/doc/fdl.txt
new file mode 100644
index 0000000..2f7e03c
--- /dev/null
+++ b/doc/fdl.txt
@@ -0,0 +1,451 @@
+
+                GNU Free Documentation License
+                 Version 1.3, 3 November 2008
+
+
+ Copyright (C) 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc.
+     <http://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+0. PREAMBLE
+
+The purpose of this License is to make a manual, textbook, or other
+functional and useful document "free" in the sense of freedom: to
+assure everyone the effective freedom to copy and redistribute it,
+with or without modifying it, either commercially or noncommercially.
+Secondarily, this License preserves for the author and publisher a way
+to get credit for their work, while not being considered responsible
+for modifications made by others.
+
+This License is a kind of "copyleft", which means that derivative
+works of the document must themselves be free in the same sense.  It
+complements the GNU General Public License, which is a copyleft
+license designed for free software.
+
+We have designed this License in order to use it for manuals for free
+software, because free software needs free documentation: a free
+program should come with manuals providing the same freedoms that the
+software does.  But this License is not limited to software manuals;
+it can be used for any textual work, regardless of subject matter or
+whether it is published as a printed book.  We recommend this License
+principally for works whose purpose is instruction or reference.
+
+
+1. APPLICABILITY AND DEFINITIONS
+
+This License applies to any manual or other work, in any medium, that
+contains a notice placed by the copyright holder saying it can be
+distributed under the terms of this License.  Such a notice grants a
+world-wide, royalty-free license, unlimited in duration, to use that
+work under the conditions stated herein.  The "Document", below,
+refers to any such manual or work.  Any member of the public is a
+licensee, and is addressed as "you".  You accept the license if you
+copy, modify or distribute the work in a way requiring permission
+under copyright law.
+
+A "Modified Version" of the Document means any work containing the
+Document or a portion of it, either copied verbatim, or with
+modifications and/or translated into another language.
+
+A "Secondary Section" is a named appendix or a front-matter section of
+the Document that deals exclusively with the relationship of the
+publishers or authors of the Document to the Document's overall
+subject (or to related matters) and contains nothing that could fall
+directly within that overall subject.  (Thus, if the Document is in
+part a textbook of mathematics, a Secondary Section may not explain
+any mathematics.)  The relationship could be a matter of historical
+connection with the subject or with related matters, or of legal,
+commercial, philosophical, ethical or political position regarding
+them.
+
+The "Invariant Sections" are certain Secondary Sections whose titles
+are designated, as being those of Invariant Sections, in the notice
+that says that the Document is released under this License.  If a
+section does not fit the above definition of Secondary then it is not
+allowed to be designated as Invariant.  The Document may contain zero
+Invariant Sections.  If the Document does not identify any Invariant
+Sections then there are none.
+
+The "Cover Texts" are certain short passages of text that are listed,
+as Front-Cover Texts or Back-Cover Texts, in the notice that says that
+the Document is released under this License.  A Front-Cover Text may
+be at most 5 words, and a Back-Cover Text may be at most 25 words.
+
+A "Transparent" copy of the Document means a machine-readable copy,
+represented in a format whose specification is available to the
+general public, that is suitable for revising the document
+straightforwardly with generic text editors or (for images composed of
+pixels) generic paint programs or (for drawings) some widely available
+drawing editor, and that is suitable for input to text formatters or
+for automatic translation to a variety of formats suitable for input
+to text formatters.  A copy made in an otherwise Transparent file
+format whose markup, or absence of markup, has been arranged to thwart
+or discourage subsequent modification by readers is not Transparent.
+An image format is not Transparent if used for any substantial amount
+of text.  A copy that is not "Transparent" is called "Opaque".
+
+Examples of suitable formats for Transparent copies include plain
+ASCII without markup, Texinfo input format, LaTeX input format, SGML
+or XML using a publicly available DTD, and standard-conforming simple
+HTML, PostScript or PDF designed for human modification.  Examples of
+transparent image formats include PNG, XCF and JPG.  Opaque formats
+include proprietary formats that can be read and edited only by
+proprietary word processors, SGML or XML for which the DTD and/or
+processing tools are not generally available, and the
+machine-generated HTML, PostScript or PDF produced by some word
+processors for output purposes only.
+
+The "Title Page" means, for a printed book, the title page itself,
+plus such following pages as are needed to hold, legibly, the material
+this License requires to appear in the title page.  For works in
+formats which do not have any title page as such, "Title Page" means
+the text near the most prominent appearance of the work's title,
+preceding the beginning of the body of the text.
+
+The "publisher" means any person or entity that distributes copies of
+the Document to the public.
+
+A section "Entitled XYZ" means a named subunit of the Document whose
+title either is precisely XYZ or contains XYZ in parentheses following
+text that translates XYZ in another language.  (Here XYZ stands for a
+specific section name mentioned below, such as "Acknowledgements",
+"Dedications", "Endorsements", or "History".)  To "Preserve the Title"
+of such a section when you modify the Document means that it remains a
+section "Entitled XYZ" according to this definition.
+
+The Document may include Warranty Disclaimers next to the notice which
+states that this License applies to the Document.  These Warranty
+Disclaimers are considered to be included by reference in this
+License, but only as regards disclaiming warranties: any other
+implication that these Warranty Disclaimers may have is void and has
+no effect on the meaning of this License.
+
+2. VERBATIM COPYING
+
+You may copy and distribute the Document in any medium, either
+commercially or noncommercially, provided that this License, the
+copyright notices, and the license notice saying this License applies
+to the Document are reproduced in all copies, and that you add no
+other conditions whatsoever to those of this License.  You may not use
+technical measures to obstruct or control the reading or further
+copying of the copies you make or distribute.  However, you may accept
+compensation in exchange for copies.  If you distribute a large enough
+number of copies you must also follow the conditions in section 3.
+
+You may also lend copies, under the same conditions stated above, and
+you may publicly display copies.
+
+
+3. COPYING IN QUANTITY
+
+If you publish printed copies (or copies in media that commonly have
+printed covers) of the Document, numbering more than 100, and the
+Document's license notice requires Cover Texts, you must enclose the
+copies in covers that carry, clearly and legibly, all these Cover
+Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on
+the back cover.  Both covers must also clearly and legibly identify
+you as the publisher of these copies.  The front cover must present
+the full title with all words of the title equally prominent and
+visible.  You may add other material on the covers in addition.
+Copying with changes limited to the covers, as long as they preserve
+the title of the Document and satisfy these conditions, can be treated
+as verbatim copying in other respects.
+
+If the required texts for either cover are too voluminous to fit
+legibly, you should put the first ones listed (as many as fit
+reasonably) on the actual cover, and continue the rest onto adjacent
+pages.
+
+If you publish or distribute Opaque copies of the Document numbering
+more than 100, you must either include a machine-readable Transparent
+copy along with each Opaque copy, or state in or with each Opaque copy
+a computer-network location from which the general network-using
+public has access to download using public-standard network protocols
+a complete Transparent copy of the Document, free of added material.
+If you use the latter option, you must take reasonably prudent steps,
+when you begin distribution of Opaque copies in quantity, to ensure
+that this Transparent copy will remain thus accessible at the stated
+location until at least one year after the last time you distribute an
+Opaque copy (directly or through your agents or retailers) of that
+edition to the public.
+
+It is requested, but not required, that you contact the authors of the
+Document well before redistributing any large number of copies, to
+give them a chance to provide you with an updated version of the
+Document.
+
+
+4. MODIFICATIONS
+
+You may copy and distribute a Modified Version of the Document under
+the conditions of sections 2 and 3 above, provided that you release
+the Modified Version under precisely this License, with the Modified
+Version filling the role of the Document, thus licensing distribution
+and modification of the Modified Version to whoever possesses a copy
+of it.  In addition, you must do these things in the Modified Version:
+
+A. Use in the Title Page (and on the covers, if any) a title distinct
+   from that of the Document, and from those of previous versions
+   (which should, if there were any, be listed in the History section
+   of the Document).  You may use the same title as a previous version
+   if the original publisher of that version gives permission.
+B. List on the Title Page, as authors, one or more persons or entities
+   responsible for authorship of the modifications in the Modified
+   Version, together with at least five of the principal authors of the
+   Document (all of its principal authors, if it has fewer than five),
+   unless they release you from this requirement.
+C. State on the Title page the name of the publisher of the
+   Modified Version, as the publisher.
+D. Preserve all the copyright notices of the Document.
+E. Add an appropriate copyright notice for your modifications
+   adjacent to the other copyright notices.
+F. Include, immediately after the copyright notices, a license notice
+   giving the public permission to use the Modified Version under the
+   terms of this License, in the form shown in the Addendum below.
+G. Preserve in that license notice the full lists of Invariant Sections
+   and required Cover Texts given in the Document's license notice.
+H. Include an unaltered copy of this License.
+I. Preserve the section Entitled "History", Preserve its Title, and add
+   to it an item stating at least the title, year, new authors, and
+   publisher of the Modified Version as given on the Title Page.  If
+   there is no section Entitled "History" in the Document, create one
+   stating the title, year, authors, and publisher of the Document as
+   given on its Title Page, then add an item describing the Modified
+   Version as stated in the previous sentence.
+J. Preserve the network location, if any, given in the Document for
+   public access to a Transparent copy of the Document, and likewise
+   the network locations given in the Document for previous versions
+   it was based on.  These may be placed in the "History" section.
+   You may omit a network location for a work that was published at
+   least four years before the Document itself, or if the original
+   publisher of the version it refers to gives permission.
+K. For any section Entitled "Acknowledgements" or "Dedications",
+   Preserve the Title of the section, and preserve in the section all
+   the substance and tone of each of the contributor acknowledgements
+   and/or dedications given therein.
+L. Preserve all the Invariant Sections of the Document,
+   unaltered in their text and in their titles.  Section numbers
+   or the equivalent are not considered part of the section titles.
+M. Delete any section Entitled "Endorsements".  Such a section
+   may not be included in the Modified Version.
+N. Do not retitle any existing section to be Entitled "Endorsements"
+   or to conflict in title with any Invariant Section.
+O. Preserve any Warranty Disclaimers.
+
+If the Modified Version includes new front-matter sections or
+appendices that qualify as Secondary Sections and contain no material
+copied from the Document, you may at your option designate some or all
+of these sections as invariant.  To do this, add their titles to the
+list of Invariant Sections in the Modified Version's license notice.
+These titles must be distinct from any other section titles.
+
+You may add a section Entitled "Endorsements", provided it contains
+nothing but endorsements of your Modified Version by various
+parties--for example, statements of peer review or that the text has
+been approved by an organization as the authoritative definition of a
+standard.
+
+You may add a passage of up to five words as a Front-Cover Text, and a
+passage of up to 25 words as a Back-Cover Text, to the end of the list
+of Cover Texts in the Modified Version.  Only one passage of
+Front-Cover Text and one of Back-Cover Text may be added by (or
+through arrangements made by) any one entity.  If the Document already
+includes a cover text for the same cover, previously added by you or
+by arrangement made by the same entity you are acting on behalf of,
+you may not add another; but you may replace the old one, on explicit
+permission from the previous publisher that added the old one.
+
+The author(s) and publisher(s) of the Document do not by this License
+give permission to use their names for publicity for or to assert or
+imply endorsement of any Modified Version.
+
+
+5. COMBINING DOCUMENTS
+
+You may combine the Document with other documents released under this
+License, under the terms defined in section 4 above for modified
+versions, provided that you include in the combination all of the
+Invariant Sections of all of the original documents, unmodified, and
+list them all as Invariant Sections of your combined work in its
+license notice, and that you preserve all their Warranty Disclaimers.
+
+The combined work need only contain one copy of this License, and
+multiple identical Invariant Sections may be replaced with a single
+copy.  If there are multiple Invariant Sections with the same name but
+different contents, make the title of each such section unique by
+adding at the end of it, in parentheses, the name of the original
+author or publisher of that section if known, or else a unique number.
+Make the same adjustment to the section titles in the list of
+Invariant Sections in the license notice of the combined work.
+
+In the combination, you must combine any sections Entitled "History"
+in the various original documents, forming one section Entitled
+"History"; likewise combine any sections Entitled "Acknowledgements",
+and any sections Entitled "Dedications".  You must delete all sections
+Entitled "Endorsements".
+
+
+6. COLLECTIONS OF DOCUMENTS
+
+You may make a collection consisting of the Document and other
+documents released under this License, and replace the individual
+copies of this License in the various documents with a single copy
+that is included in the collection, provided that you follow the rules
+of this License for verbatim copying of each of the documents in all
+other respects.
+
+You may extract a single document from such a collection, and
+distribute it individually under this License, provided you insert a
+copy of this License into the extracted document, and follow this
+License in all other respects regarding verbatim copying of that
+document.
+
+
+7. AGGREGATION WITH INDEPENDENT WORKS
+
+A compilation of the Document or its derivatives with other separate
+and independent documents or works, in or on a volume of a storage or
+distribution medium, is called an "aggregate" if the copyright
+resulting from the compilation is not used to limit the legal rights
+of the compilation's users beyond what the individual works permit.
+When the Document is included in an aggregate, this License does not
+apply to the other works in the aggregate which are not themselves
+derivative works of the Document.
+
+If the Cover Text requirement of section 3 is applicable to these
+copies of the Document, then if the Document is less than one half of
+the entire aggregate, the Document's Cover Texts may be placed on
+covers that bracket the Document within the aggregate, or the
+electronic equivalent of covers if the Document is in electronic form.
+Otherwise they must appear on printed covers that bracket the whole
+aggregate.
+
+
+8. TRANSLATION
+
+Translation is considered a kind of modification, so you may
+distribute translations of the Document under the terms of section 4.
+Replacing Invariant Sections with translations requires special
+permission from their copyright holders, but you may include
+translations of some or all Invariant Sections in addition to the
+original versions of these Invariant Sections.  You may include a
+translation of this License, and all the license notices in the
+Document, and any Warranty Disclaimers, provided that you also include
+the original English version of this License and the original versions
+of those notices and disclaimers.  In case of a disagreement between
+the translation and the original version of this License or a notice
+or disclaimer, the original version will prevail.
+
+If a section in the Document is Entitled "Acknowledgements",
+"Dedications", or "History", the requirement (section 4) to Preserve
+its Title (section 1) will typically require changing the actual
+title.
+
+
+9. TERMINATION
+
+You may not copy, modify, sublicense, or distribute the Document
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense, or distribute it is void, and
+will automatically terminate your rights under this License.
+
+However, if you cease all violation of this License, then your license
+from a particular copyright holder is reinstated (a) provisionally,
+unless and until the copyright holder explicitly and finally
+terminates your license, and (b) permanently, if the copyright holder
+fails to notify you of the violation by some reasonable means prior to
+60 days after the cessation.
+
+Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, receipt of a copy of some or all of the same material does
+not give you any rights to use it.
+
+
+10. FUTURE REVISIONS OF THIS LICENSE
+
+The Free Software Foundation may publish new, revised versions of the
+GNU Free Documentation License from time to time.  Such new versions
+will be similar in spirit to the present version, but may differ in
+detail to address new problems or concerns.  See
+http://www.gnu.org/copyleft/.
+
+Each version of the License is given a distinguishing version number.
+If the Document specifies that a particular numbered version of this
+License "or any later version" applies to it, you have the option of
+following the terms and conditions either of that specified version or
+of any later version that has been published (not as a draft) by the
+Free Software Foundation.  If the Document does not specify a version
+number of this License, you may choose any version ever published (not
+as a draft) by the Free Software Foundation.  If the Document
+specifies that a proxy can decide which future versions of this
+License can be used, that proxy's public statement of acceptance of a
+version permanently authorizes you to choose that version for the
+Document.
+
+11. RELICENSING
+
+"Massive Multiauthor Collaboration Site" (or "MMC Site") means any
+World Wide Web server that publishes copyrightable works and also
+provides prominent facilities for anybody to edit those works.  A
+public wiki that anybody can edit is an example of such a server.  A
+"Massive Multiauthor Collaboration" (or "MMC") contained in the site
+means any set of copyrightable works thus published on the MMC site.
+
+"CC-BY-SA" means the Creative Commons Attribution-Share Alike 3.0 
+license published by Creative Commons Corporation, a not-for-profit 
+corporation with a principal place of business in San Francisco, 
+California, as well as future copyleft versions of that license 
+published by that same organization.
+
+"Incorporate" means to publish or republish a Document, in whole or in 
+part, as part of another Document.
+
+An MMC is "eligible for relicensing" if it is licensed under this 
+License, and if all works that were first published under this License 
+somewhere other than this MMC, and subsequently incorporated in whole or 
+in part into the MMC, (1) had no cover texts or invariant sections, and 
+(2) were thus incorporated prior to November 1, 2008.
+
+The operator of an MMC Site may republish an MMC contained in the site
+under CC-BY-SA on the same site at any time before August 1, 2009,
+provided the MMC is eligible for relicensing.
+
+
+ADDENDUM: How to use this License for your documents
+
+To use this License in a document you have written, include a copy of
+the License in the document and put the following copyright and
+license notices just after the title page:
+
+    Copyright (c)  YEAR  YOUR NAME.
+    Permission is granted to copy, distribute and/or modify this document
+    under the terms of the GNU Free Documentation License, Version 1.3
+    or any later version published by the Free Software Foundation;
+    with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.
+    A copy of the license is included in the section entitled "GNU
+    Free Documentation License".
+
+If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts,
+replace the "with...Texts." line with this:
+
+    with the Invariant Sections being LIST THEIR TITLES, with the
+    Front-Cover Texts being LIST, and with the Back-Cover Texts being LIST.
+
+If you have Invariant Sections without Cover Texts, or some other
+combination of the three, merge those two alternatives to suit the
+situation.
+
+If your document contains nontrivial examples of program code, we
+recommend releasing these examples in parallel under your choice of
+free software license, such as the GNU General Public License,
+to permit their use in free software.
diff --git a/doc/htmlpost.sh b/doc/htmlpost.sh
new file mode 100755
index 0000000..51241b1
--- /dev/null
+++ b/doc/htmlpost.sh
@@ -0,0 +1,19 @@
+#! /bin/sh
+#
+# Some of these should really be done by man2html
+#
+# The ~/xxx links don't really work -- netscape doesn't expand the home
+# directory of the user running navigator
+#
+
+sed -e 's|<B>gnu.bash.bug</B>|<A HREF="news:gnu.bash.bug">gnu.bash.bug</A>|g' \
+    -e 's|<I>/bin/bash</I>|<A HREF="file:/bin/bash"><I>/bin/bash</I></A>|g' \
+    -e 's|<I>/etc/profile</I>|<A HREF="file:/etc/profile"><I>/etc/profile</I></A>|g' \
+    -e 's|<I>~/.bash_profile</I>|<A HREF="file:~/.bash_profile"><I>~/.bash_profile</I></A>|g' \
+    -e 's|<I>~/.bash_login</I>|<A HREF="file:~/.bash_login"><I>~/.bash_login</I></A>|g' \
+    -e 's|<I>~/.profile</I>|<A HREF="file:~/.profile"><I>~/.profile</I></A>|g' \
+    -e 's|<I>~/.bashrc</I>|<A HREF="file:~/.bashrc"><I>~/.bashrc</I></A>|g' \
+    -e 's|<I>~/.bash_logout</I>|<A HREF="file:~/.bash_logout"><I>~/.bash_logout</I></A>|g' \
+    -e 's|<I>~/.bash_history</I>|<A HREF="file:~/.bash_history"><I>~/.bash_history</I></A>|g' \
+    -e 's|<I>~/.inputrc</I>|<A HREF="file:~/.inputrc"><I>~/.inputrc</I></A>|g' \
+    -e 's|<I>/etc/inputrc</I>|<A HREF="file:/etc/inputrc"><I>/etc/inputrc</I></A>|g'
diff --git a/doc/infopost.sh b/doc/infopost.sh
new file mode 100755
index 0000000..85c49b4
--- /dev/null
+++ b/doc/infopost.sh
@@ -0,0 +1,8 @@
+#! /bin/sh
+#
+# Some of these should really be done by options to makeinfo or by
+# using @setfilename, but this way we can have both bashref.info and
+# bash.info (for installing)
+#
+
+sed -e 's|bashref.info|bash.info|g'
diff --git a/doc/rbash.0 b/doc/rbash.0
new file mode 100644
index 0000000..b602a70
--- /dev/null
+++ b/doc/rbash.0
@@ -0,0 +1,63 @@
+RBASH(1)                    General Commands Manual                   RBASH(1)
+
+
+
+NNAAMMEE
+       rbash - restricted bash, see bbaasshh(1)
+
+RREESSTTRRIICCTTEEDD SSHHEELLLL
+       If bbaasshh is started with the name rrbbaasshh, or the --rr option is supplied at
+       invocation, the shell becomes restricted.  A restricted shell  is  used
+       to  set  up an environment more controlled than the standard shell.  It
+       behaves identically to bbaasshh with the exception that the  following  are
+       disallowed or not performed:
+
+       +o      changing directories with ccdd
+
+       +o      setting  or  unsetting the values of SSHHEELLLL, PPAATTHH, HHIISSTTFFIILLEE, EENNVV,
+              or BBAASSHH__EENNVV
+
+       +o      specifying command names containing //
+
+       +o      specifying a filename containing a // as an  argument  to  the  ..
+              builtin command
+
+       +o      specifying  a  filename containing a slash as an argument to the
+              hhiissttoorryy builtin command
+
+       +o      specifying a filename containing a slash as an argument  to  the
+              --pp option to the hhaasshh builtin command
+
+       +o      importing  function  definitions  from  the shell environment at
+              startup
+
+       +o      parsing the value of SSHHEELLLLOOPPTTSS from  the  shell  environment  at
+              startup
+
+       +o      redirecting output using the >, >|, <>, >&, &>, and >> redirect-
+              ion operators
+
+       +o      using the eexxeecc builtin command to replace the shell with another
+              command
+
+       +o      adding  or  deleting builtin commands with the --ff and --dd options
+              to the eennaabbllee builtin command
+
+       +o      using the  eennaabbllee  builtin  command  to  enable  disabled  shell
+              builtins
+
+       +o      specifying the --pp option to the ccoommmmaanndd builtin command
+
+       +o      turning off restricted mode with sseett ++rr or sseett ++oo rreessttrriicctteedd.
+
+       These restrictions are enforced after any startup files are read.
+
+       When  a  command  that is found to be a shell script is executed, rrbbaasshh
+       turns off any restrictions in the shell spawned to execute the script.
+
+SSEEEE AALLSSOO
+       bash(1)
+
+
+
+GNU Bash-4.0                      2004 Apr 20                         RBASH(1)
diff --git a/doc/rbash.1 b/doc/rbash.1
new file mode 100644
index 0000000..56e38fd
--- /dev/null
+++ b/doc/rbash.1
@@ -0,0 +1,8 @@
+.TH RBASH 1 "2004 Apr 20" "GNU Bash-4.0"
+.SH NAME
+rbash \- restricted bash, see \fBbash\fR(1)
+.SH RESTRICTED SHELL
+.nr zY 1
+.so bash.1
+.SH SEE ALSO
+bash(1)
diff --git a/doc/rbash.ps b/doc/rbash.ps
new file mode 100644
index 0000000..45c9f66
--- /dev/null
+++ b/doc/rbash.ps
@@ -0,0 +1,290 @@
+%!PS-Adobe-3.0
+%%Creator: groff version 1.22.4
+%%CreationDate: Wed Nov 18 15:13:06 2020
+%%DocumentNeededResources: font Times-Roman
+%%+ font Times-Bold
+%%DocumentSuppliedResources: procset grops 1.22 4
+%%Pages: 1
+%%PageOrder: Ascend
+%%DocumentMedia: Default 612 792 0 () ()
+%%Orientation: Portrait
+%%EndComments
+%%BeginDefaults
+%%PageMedia: Default
+%%EndDefaults
+%%BeginProlog
+%%BeginResource: procset grops 1.22 4
+%!PS-Adobe-3.0 Resource-ProcSet
+/setpacking where{
+pop
+currentpacking
+true setpacking
+}if
+/grops 120 dict dup begin
+/SC 32 def
+/A/show load def
+/B{0 SC 3 -1 roll widthshow}bind def
+/C{0 exch ashow}bind def
+/D{0 exch 0 SC 5 2 roll awidthshow}bind def
+/E{0 rmoveto show}bind def
+/F{0 rmoveto 0 SC 3 -1 roll widthshow}bind def
+/G{0 rmoveto 0 exch ashow}bind def
+/H{0 rmoveto 0 exch 0 SC 5 2 roll awidthshow}bind def
+/I{0 exch rmoveto show}bind def
+/J{0 exch rmoveto 0 SC 3 -1 roll widthshow}bind def
+/K{0 exch rmoveto 0 exch ashow}bind def
+/L{0 exch rmoveto 0 exch 0 SC 5 2 roll awidthshow}bind def
+/M{rmoveto show}bind def
+/N{rmoveto 0 SC 3 -1 roll widthshow}bind def
+/O{rmoveto 0 exch ashow}bind def
+/P{rmoveto 0 exch 0 SC 5 2 roll awidthshow}bind def
+/Q{moveto show}bind def
+/R{moveto 0 SC 3 -1 roll widthshow}bind def
+/S{moveto 0 exch ashow}bind def
+/T{moveto 0 exch 0 SC 5 2 roll awidthshow}bind def
+/SF{
+findfont exch
+[exch dup 0 exch 0 exch neg 0 0]makefont
+dup setfont
+[exch/setfont cvx]cvx bind def
+}bind def
+/MF{
+findfont
+[5 2 roll
+0 3 1 roll
+neg 0 0]makefont
+dup setfont
+[exch/setfont cvx]cvx bind def
+}bind def
+/level0 0 def
+/RES 0 def
+/PL 0 def
+/LS 0 def
+/MANUAL{
+statusdict begin/manualfeed true store end
+}bind def
+/PLG{
+gsave newpath clippath pathbbox grestore
+exch pop add exch pop
+}bind def
+/BP{
+/level0 save def
+1 setlinecap
+1 setlinejoin
+DEFS/BPhook known{DEFS begin BPhook end}if
+72 RES div dup scale
+LS{
+90 rotate
+}{
+0 PL translate
+}ifelse
+1 -1 scale
+}bind def
+/EP{
+level0 restore
+showpage
+}def
+/DA{
+newpath arcn stroke
+}bind def
+/SN{
+transform
+.25 sub exch .25 sub exch
+round .25 add exch round .25 add exch
+itransform
+}bind def
+/DL{
+SN
+moveto
+SN
+lineto stroke
+}bind def
+/DC{
+newpath 0 360 arc closepath
+}bind def
+/TM matrix def
+/DE{
+TM currentmatrix pop
+translate scale newpath 0 0 .5 0 360 arc closepath
+TM setmatrix
+}bind def
+/RC/rcurveto load def
+/RL/rlineto load def
+/ST/stroke load def
+/MT/moveto load def
+/CL/closepath load def
+/Fr{
+setrgbcolor fill
+}bind def
+/setcmykcolor where{
+pop
+/Fk{
+setcmykcolor fill
+}bind def
+}if
+/Fg{
+setgray fill
+}bind def
+/FL/fill load def
+/LW/setlinewidth load def
+/Cr/setrgbcolor load def
+/setcmykcolor where{
+pop
+/Ck/setcmykcolor load def
+}if
+/Cg/setgray load def
+/RE{
+findfont
+dup maxlength 1 index/FontName known not{1 add}if dict begin
+{
+1 index/FID ne
+2 index/UniqueID ne
+and
+{def}{pop pop}ifelse
+}forall
+/Encoding exch def
+dup/FontName exch def
+currentdict end definefont pop
+}bind def
+/DEFS 0 def
+/EBEGIN{
+moveto
+DEFS begin
+}bind def
+/EEND/end load def
+/CNT 0 def
+/level1 0 def
+/PBEGIN{
+/level1 save def
+translate
+div 3 1 roll div exch scale
+neg exch neg exch translate
+0 setgray
+0 setlinecap
+1 setlinewidth
+0 setlinejoin
+10 setmiterlimit
+[]0 setdash
+/setstrokeadjust where{
+pop
+false setstrokeadjust
+}if
+/setoverprint where{
+pop
+false setoverprint
+}if
+newpath
+/CNT countdictstack def
+userdict begin
+/showpage{}def
+/setpagedevice{}def
+mark
+}bind def
+/PEND{
+cleartomark
+countdictstack CNT sub{end}repeat
+level1 restore
+}bind def
+end def
+/setpacking where{
+pop
+setpacking
+}if
+%%EndResource
+%%EndProlog
+%%BeginSetup
+%%BeginFeature: *PageSize Default
+<< /PageSize [ 612 792 ] /ImagingBBox null >> setpagedevice
+%%EndFeature
+%%IncludeResource: font Times-Roman
+%%IncludeResource: font Times-Bold
+grops begin/DEFS 1 dict def DEFS begin/u{.001 mul}bind def end/RES 72
+def/PL 792 def/LS false def/ENC0[/asciicircum/asciitilde/Scaron/Zcaron
+/scaron/zcaron/Ydieresis/trademark/quotesingle/Euro/.notdef/.notdef
+/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef
+/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef
+/.notdef/.notdef/space/exclam/quotedbl/numbersign/dollar/percent
+/ampersand/quoteright/parenleft/parenright/asterisk/plus/comma/hyphen
+/period/slash/zero/one/two/three/four/five/six/seven/eight/nine/colon
+/semicolon/less/equal/greater/question/at/A/B/C/D/E/F/G/H/I/J/K/L/M/N/O
+/P/Q/R/S/T/U/V/W/X/Y/Z/bracketleft/backslash/bracketright/circumflex
+/underscore/quoteleft/a/b/c/d/e/f/g/h/i/j/k/l/m/n/o/p/q/r/s/t/u/v/w/x/y
+/z/braceleft/bar/braceright/tilde/.notdef/quotesinglbase/guillemotleft
+/guillemotright/bullet/florin/fraction/perthousand/dagger/daggerdbl
+/endash/emdash/ff/fi/fl/ffi/ffl/dotlessi/dotlessj/grave/hungarumlaut
+/dotaccent/breve/caron/ring/ogonek/quotedblleft/quotedblright/oe/lslash
+/quotedblbase/OE/Lslash/.notdef/exclamdown/cent/sterling/currency/yen
+/brokenbar/section/dieresis/copyright/ordfeminine/guilsinglleft
+/logicalnot/minus/registered/macron/degree/plusminus/twosuperior
+/threesuperior/acute/mu/paragraph/periodcentered/cedilla/onesuperior
+/ordmasculine/guilsinglright/onequarter/onehalf/threequarters
+/questiondown/Agrave/Aacute/Acircumflex/Atilde/Adieresis/Aring/AE
+/Ccedilla/Egrave/Eacute/Ecircumflex/Edieresis/Igrave/Iacute/Icircumflex
+/Idieresis/Eth/Ntilde/Ograve/Oacute/Ocircumflex/Otilde/Odieresis
+/multiply/Oslash/Ugrave/Uacute/Ucircumflex/Udieresis/Yacute/Thorn
+/germandbls/agrave/aacute/acircumflex/atilde/adieresis/aring/ae/ccedilla
+/egrave/eacute/ecircumflex/edieresis/igrave/iacute/icircumflex/idieresis
+/eth/ntilde/ograve/oacute/ocircumflex/otilde/odieresis/divide/oslash
+/ugrave/uacute/ucircumflex/udieresis/yacute/thorn/ydieresis]def
+/Times-Bold@0 ENC0/Times-Bold RE/Times-Roman@0 ENC0/Times-Roman RE
+%%EndSetup
+%%Page: 1 1
+%%BeginPageSetup
+BP
+%%EndPageSetup
+/F0 10/Times-Roman@0 SF(RB)72 48 Q 130.47(ASH\(1\) General)-.35 F
+(Commands Manual)2.5 E(RB)132.97 E(ASH\(1\))-.35 E/F1 10.95/Times-Bold@0
+SF -.219(NA)72 84 S(ME).219 E F0(rbash \255 restricted bash, see)108 96
+Q/F2 10/Times-Bold@0 SF(bash)2.5 E F0(\(1\))A F1(RESTRICTED SHELL)72
+112.8 Q F0(If)108 124.8 Q F2(bash)3.582 E F0 1.081
+(is started with the name)3.581 F F2(rbash)3.581 E F0 3.581(,o)C 3.581
+(rt)-3.581 G(he)-3.581 E F2<ad72>3.581 E F0 1.081
+(option is supplied at in)3.581 F -.2(vo)-.4 G 1.081
+(cation, the shell becomes re-).2 F 2.976(stricted. A)108 136.8 R .476
+(restricted shell is used to set up an en)2.976 F .476
+(vironment more controlled than the standard shell.)-.4 F .477(It be-)
+5.477 F(ha)108 148.8 Q -.15(ve)-.2 G 2.5(si).15 G(dentically to)-2.5 E
+F2(bash)2.5 E F0(with the e)2.5 E(xception that the follo)-.15 E
+(wing are disallo)-.25 E(wed or not performed:)-.25 E<83>108 165.6 Q
+(changing directories with)144 165.6 Q F2(cd)2.5 E F0<83>108 182.4 Q
+(setting or unsetting the v)144 182.4 Q(alues of)-.25 E/F3 9
+/Times-Bold@0 SF(SHELL)2.5 E/F4 9/Times-Roman@0 SF(,)A F3 -.666(PA)2.25
+G(TH)-.189 E F4(,)A F3(HISTFILE)2.25 E F4(,)A F3(ENV)2.25 E F4(,)A F0
+(or)2.25 E F3 -.27(BA)2.5 G(SH_ENV).27 E F0<83>108 199.2 Q
+(specifying command names containing)144 199.2 Q F2(/)2.5 E F0<83>108
+216 Q(specifying a \214lename containing a)144 216 Q F2(/)2.5 E F0
+(as an ar)2.5 E(gument to the)-.18 E F2(.)2.5 E F0 -.2(bu)5 G
+(iltin command).2 E<83>108 232.8 Q
+(specifying a \214lename containing a slash as an ar)144 232.8 Q
+(gument to the)-.18 E F2(history)2.5 E F0 -.2(bu)2.5 G(iltin command).2
+E<83>108 249.6 Q .45
+(specifying a \214lename containing a slash as an ar)144 249.6 R .449
+(gument to the)-.18 F F2<ad70>2.949 E F0 .449(option to the)2.949 F F2
+(hash)2.949 E F0 -.2(bu)2.949 G .449(iltin com-).2 F(mand)144 261.6 Q
+<83>108 278.4 Q(importing function de\214nitions from the shell en)144
+278.4 Q(vironment at startup)-.4 E<83>108 295.2 Q(parsing the v)144
+295.2 Q(alue of)-.25 E F3(SHELLOPTS)2.5 E F0(from the shell en)2.25 E
+(vironment at startup)-.4 E<83>108 312 Q(redirecting output using the >\
+, >|, <>, >&, &>, and >> redirection operators)144 312 Q<83>108 328.8 Q
+(using the)144 328.8 Q F2(exec)2.5 E F0 -.2(bu)2.5 G
+(iltin command to replace the shell with another command).2 E<83>108
+345.6 Q(adding or deleting b)144 345.6 Q(uiltin commands with the)-.2 E
+F2<ad66>2.5 E F0(and)2.5 E F2<ad64>2.5 E F0(options to the)2.5 E F2
+(enable)2.5 E F0 -.2(bu)2.5 G(iltin command).2 E<83>108 362.4 Q
+(using the)144 362.4 Q F2(enable)2.5 E F0 -.2(bu)2.5 G
+(iltin command to enable disabled shell b).2 E(uiltins)-.2 E<83>108
+379.2 Q(specifying the)144 379.2 Q F2<ad70>2.5 E F0(option to the)2.5 E
+F2(command)2.5 E F0 -.2(bu)2.5 G(iltin command).2 E<83>108 396 Q
+(turning of)144 396 Q 2.5(fr)-.25 G(estricted mode with)-2.5 E F2
+(set +r)2.5 E F0(or)2.5 E F2(set +o r)2.5 E(estricted)-.18 E F0(.)A
+(These restrictions are enforced after an)108 412.8 Q 2.5(ys)-.15 G
+(tartup \214les are read.)-2.5 E .429
+(When a command that is found to be a shell script is e)108 429.6 R -.15
+(xe)-.15 G(cuted,).15 E F2(rbash)2.929 E F0 .429(turns of)2.929 F 2.929
+(fa)-.25 G .729 -.15(ny r)-2.929 H .429(estrictions in the shell).15 F
+(spa)108 441.6 Q(wned to e)-.15 E -.15(xe)-.15 G(cute the script.).15 E
+F1(SEE ALSO)72 458.4 Q F0(bash\(1\))108 470.4 Q(GNU Bash-4.0)72 768 Q
+(2004 Apr 20)148.735 E(1)203.725 E 0 Cg EP
+%%Trailer
+end
+%%EOF
diff --git a/doc/texinfo.tex b/doc/texinfo.tex
new file mode 100644
index 0000000..d494cce
--- /dev/null
+++ b/doc/texinfo.tex
@@ -0,0 +1,11045 @@
+% texinfo.tex -- TeX macros to handle Texinfo files.
+% 
+% Load plain if necessary, i.e., if running under initex.
+\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
+%
+\def\texinfoversion{2015-11-22.14}
+%
+% Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
+% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
+% 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
+% Free Software Foundation, Inc.
+%
+% This texinfo.tex file is free software: you can redistribute it and/or
+% modify it under the terms of the GNU General Public License as
+% published by the Free Software Foundation, either version 3 of the
+% License, or (at your option) any later version.
+%
+% This texinfo.tex file is distributed in the hope that it will be
+% useful, but WITHOUT ANY WARRANTY; without even the implied warranty
+% of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+% General Public License for more details.
+%
+% You should have received a copy of the GNU General Public License
+% along with this program.  If not, see <http://www.gnu.org/licenses/>.
+%
+% As a special exception, when this file is read by TeX when processing
+% a Texinfo source document, you may use the result without
+% restriction. This Exception is an additional permission under section 7
+% of the GNU General Public License, version 3 ("GPLv3").
+%
+% Please try the latest version of texinfo.tex before submitting bug
+% reports; you can get the latest version from:
+%   http://ftp.gnu.org/gnu/texinfo/ (the Texinfo release area), or
+%   http://ftpmirror.gnu.org/texinfo/ (same, via a mirror), or
+%   http://www.gnu.org/software/texinfo/ (the Texinfo home page)
+% The texinfo.tex in any given distribution could well be out
+% of date, so if that's what you're using, please check.
+%
+% Send bug reports to bug-texinfo@gnu.org.  Please include including a
+% complete document in each bug report with which we can reproduce the
+% problem.  Patches are, of course, greatly appreciated.
+%
+% To process a Texinfo manual with TeX, it's most reliable to use the
+% texi2dvi shell script that comes with the distribution.  For a simple
+% manual foo.texi, however, you can get away with this:
+%   tex foo.texi
+%   texindex foo.??
+%   tex foo.texi
+%   tex foo.texi
+%   dvips foo.dvi -o  # or whatever; this makes foo.ps.
+% The extra TeX runs get the cross-reference information correct.
+% Sometimes one run after texindex suffices, and sometimes you need more
+% than two; texi2dvi does it as many times as necessary.
+%
+% It is possible to adapt texinfo.tex for other languages, to some
+% extent.  You can get the existing language-specific files from the
+% full Texinfo distribution.
+%
+% The GNU Texinfo home page is http://www.gnu.org/software/texinfo.
+
+
+\message{Loading texinfo [version \texinfoversion]:}
+
+% If in a .fmt file, print the version number
+% and turn on active characters that we couldn't do earlier because
+% they might have appeared in the input file name.
+\everyjob{\message{[Texinfo version \texinfoversion]}%
+  \catcode`+=\active \catcode`\_=\active}
+
+\chardef\other=12
+
+% We never want plain's \outer definition of \+ in Texinfo.
+% For @tex, we can use \tabalign.
+\let\+ = \relax
+
+% Save some plain tex macros whose names we will redefine.
+\let\ptexb=\b
+\let\ptexbullet=\bullet
+\let\ptexc=\c
+\let\ptexcomma=\,
+\let\ptexdot=\.
+\let\ptexdots=\dots
+\let\ptexend=\end
+\let\ptexequiv=\equiv
+\let\ptexexclam=\!
+\let\ptexfootnote=\footnote
+\let\ptexgtr=>
+\let\ptexhat=^
+\let\ptexi=\i
+\let\ptexindent=\indent
+\let\ptexinsert=\insert
+\let\ptexlbrace=\{
+\let\ptexless=<
+\let\ptexnewwrite\newwrite
+\let\ptexnoindent=\noindent
+\let\ptexplus=+
+\let\ptexraggedright=\raggedright
+\let\ptexrbrace=\}
+\let\ptexslash=\/
+\let\ptexsp=\sp
+\let\ptexstar=\*
+\let\ptexsup=\sup
+\let\ptext=\t
+\let\ptextop=\top
+{\catcode`\'=\active \global\let\ptexquoteright'}% active in plain's math mode
+
+% If this character appears in an error message or help string, it
+% starts a new line in the output.
+\newlinechar = `^^J
+
+% Use TeX 3.0's \inputlineno to get the line number, for better error
+% messages, but if we're using an old version of TeX, don't do anything.
+%
+\ifx\inputlineno\thisisundefined
+  \let\linenumber = \empty % Pre-3.0.
+\else
+  \def\linenumber{l.\the\inputlineno:\space}
+\fi
+
+% Set up fixed words for English if not already set.
+\ifx\putwordAppendix\undefined  \gdef\putwordAppendix{Appendix}\fi
+\ifx\putwordChapter\undefined   \gdef\putwordChapter{Chapter}\fi
+\ifx\putworderror\undefined     \gdef\putworderror{error}\fi
+\ifx\putwordfile\undefined      \gdef\putwordfile{file}\fi
+\ifx\putwordin\undefined        \gdef\putwordin{in}\fi
+\ifx\putwordIndexIsEmpty\undefined       \gdef\putwordIndexIsEmpty{(Index is empty)}\fi
+\ifx\putwordIndexNonexistent\undefined   \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi
+\ifx\putwordInfo\undefined      \gdef\putwordInfo{Info}\fi
+\ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi
+\ifx\putwordMethodon\undefined  \gdef\putwordMethodon{Method on}\fi
+\ifx\putwordNoTitle\undefined   \gdef\putwordNoTitle{No Title}\fi
+\ifx\putwordof\undefined        \gdef\putwordof{of}\fi
+\ifx\putwordon\undefined        \gdef\putwordon{on}\fi
+\ifx\putwordpage\undefined      \gdef\putwordpage{page}\fi
+\ifx\putwordsection\undefined   \gdef\putwordsection{section}\fi
+\ifx\putwordSection\undefined   \gdef\putwordSection{Section}\fi
+\ifx\putwordsee\undefined       \gdef\putwordsee{see}\fi
+\ifx\putwordSee\undefined       \gdef\putwordSee{See}\fi
+\ifx\putwordShortTOC\undefined  \gdef\putwordShortTOC{Short Contents}\fi
+\ifx\putwordTOC\undefined       \gdef\putwordTOC{Table of Contents}\fi
+%
+\ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi
+\ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi
+\ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi
+\ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi
+\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi
+\ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi
+\ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi
+\ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi
+\ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi
+\ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi
+\ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi
+\ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi
+%
+\ifx\putwordDefmac\undefined    \gdef\putwordDefmac{Macro}\fi
+\ifx\putwordDefspec\undefined   \gdef\putwordDefspec{Special Form}\fi
+\ifx\putwordDefvar\undefined    \gdef\putwordDefvar{Variable}\fi
+\ifx\putwordDefopt\undefined    \gdef\putwordDefopt{User Option}\fi
+\ifx\putwordDeffunc\undefined   \gdef\putwordDeffunc{Function}\fi
+
+% Since the category of space is not known, we have to be careful.
+\chardef\spacecat = 10
+\def\spaceisspace{\catcode`\ =\spacecat}
+
+% sometimes characters are active, so we need control sequences.
+\chardef\ampChar   = `\&
+\chardef\colonChar = `\:
+\chardef\commaChar = `\,
+\chardef\dashChar  = `\-
+\chardef\dotChar   = `\.
+\chardef\exclamChar= `\!
+\chardef\hashChar  = `\#
+\chardef\lquoteChar= `\`
+\chardef\questChar = `\?
+\chardef\rquoteChar= `\'
+\chardef\semiChar  = `\;
+\chardef\slashChar = `\/
+\chardef\underChar = `\_
+
+% Ignore a token.
+%
+\def\gobble#1{}
+
+% The following is used inside several \edef's.
+\def\makecsname#1{\expandafter\noexpand\csname#1\endcsname}
+
+% Hyphenation fixes.
+\hyphenation{
+  Flor-i-da Ghost-script Ghost-view Mac-OS Post-Script
+  ap-pen-dix bit-map bit-maps
+  data-base data-bases eshell fall-ing half-way long-est man-u-script
+  man-u-scripts mini-buf-fer mini-buf-fers over-view par-a-digm
+  par-a-digms rath-er rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces
+  spell-ing spell-ings
+  stand-alone strong-est time-stamp time-stamps which-ever white-space
+  wide-spread wrap-around
+}
+
+% Sometimes it is convenient to have everything in the transcript file
+% and nothing on the terminal.  We don't just call \tracingall here,
+% since that produces some useless output on the terminal.  We also make
+% some effort to order the tracing commands to reduce output in the log
+% file; cf. trace.sty in LaTeX.
+%
+\def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}%
+\def\loggingall{%
+  \tracingstats2
+  \tracingpages1
+  \tracinglostchars2  % 2 gives us more in etex
+  \tracingparagraphs1
+  \tracingoutput1
+  \tracingmacros2
+  \tracingrestores1
+  \showboxbreadth\maxdimen \showboxdepth\maxdimen
+  \ifx\eTeXversion\thisisundefined\else % etex gives us more logging
+    \tracingscantokens1
+    \tracingifs1
+    \tracinggroups1
+    \tracingnesting2
+    \tracingassigns1
+  \fi
+  \tracingcommands3  % 3 gives us more in etex
+  \errorcontextlines16
+}%
+
+% @errormsg{MSG}.  Do the index-like expansions on MSG, but if things
+% aren't perfect, it's not the end of the world, being an error message,
+% after all.
+% 
+\def\errormsg{\begingroup \indexnofonts \doerrormsg}
+\def\doerrormsg#1{\errmessage{#1}}
+
+% add check for \lastpenalty to plain's definitions.  If the last thing
+% we did was a \nobreak, we don't want to insert more space.
+%
+\def\smallbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\smallskipamount
+  \removelastskip\penalty-50\smallskip\fi\fi}
+\def\medbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\medskipamount
+  \removelastskip\penalty-100\medskip\fi\fi}
+\def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount
+  \removelastskip\penalty-200\bigskip\fi\fi}
+
+% Output routine
+%
+
+% For a final copy, take out the rectangles
+% that mark overfull boxes (in case you have decided
+% that the text looks ok even though it passes the margin).
+%
+\def\finalout{\overfullrule=0pt }
+
+% Do @cropmarks to get crop marks.
+%
+\newif\ifcropmarks
+\let\cropmarks = \cropmarkstrue
+%
+% Dimensions to add cropmarks at corners.
+% Added by P. A. MacKay, 12 Nov. 1986
+%
+\newdimen\outerhsize \newdimen\outervsize % set by the paper size routines
+\newdimen\cornerlong  \cornerlong=1pc
+\newdimen\cornerthick \cornerthick=.3pt
+\newdimen\topandbottommargin \topandbottommargin=.75in
+
+% Output a mark which sets \thischapter, \thissection and \thiscolor.
+% We dump everything together because we only have one kind of mark.
+% This works because we only use \botmark / \topmark, not \firstmark.
+%
+% A mark contains a subexpression of the \ifcase ... \fi construct.
+% \get*marks macros below extract the needed part using \ifcase.
+%
+% Another complication is to let the user choose whether \thischapter
+% (\thissection) refers to the chapter (section) in effect at the top
+% of a page, or that at the bottom of a page.  The solution is
+% described on page 260 of The TeXbook.  It involves outputting two
+% marks for the sectioning macros, one before the section break, and
+% one after.  I won't pretend I can describe this better than DEK...
+%
+\def\domark{%
+  \toks0=\expandafter{\lastchapterdefs}%
+  \toks2=\expandafter{\lastsectiondefs}%
+  \toks4=\expandafter{\prevchapterdefs}%
+  \toks6=\expandafter{\prevsectiondefs}%
+  \toks8=\expandafter{\lastcolordefs}%
+  \mark{%
+                   \the\toks0 \the\toks2  % 0: top marks (\last...)
+      \noexpand\or \the\toks4 \the\toks6  % 1: bottom marks (default, \prev...)
+    \noexpand\else \the\toks8             % 2: color marks
+  }%
+}
+
+% \gettopheadingmarks, \getbottomheadingmarks - extract needed part of mark.
+%
+% \topmark doesn't work for the very first chapter (after the title
+% page or the contents), so we use \firstmark there -- this gets us
+% the mark with the chapter defs, unless the user sneaks in, e.g.,
+% @setcolor (or @url, or @link, etc.) between @contents and the very
+% first @chapter.
+\def\gettopheadingmarks{%
+  \ifcase0\topmark\fi
+  \ifx\thischapter\empty \ifcase0\firstmark\fi \fi
+}
+\def\getbottomheadingmarks{\ifcase1\botmark\fi}
+\def\getcolormarks{\ifcase2\topmark\fi}
+
+% Avoid "undefined control sequence" errors.
+\def\lastchapterdefs{}
+\def\lastsectiondefs{}
+\def\lastsection{}
+\def\prevchapterdefs{}
+\def\prevsectiondefs{}
+\def\lastcolordefs{}
+
+% Margin to add to right of even pages, to left of odd pages.
+\newdimen\bindingoffset
+\newdimen\normaloffset
+\newdimen\pagewidth \newdimen\pageheight
+
+% Main output routine.
+%
+\chardef\PAGE = 255
+\output = {\onepageout{\pagecontents\PAGE}}
+
+\newbox\headlinebox
+\newbox\footlinebox
+
+% \onepageout takes a vbox as an argument.
+% \shipout a vbox for a single page, adding an optional header, footer,
+% cropmarks, and footnote.  This also causes index entries for this page
+% to be written to the auxiliary files.
+%
+\def\onepageout#1{%
+  \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi
+  %
+  \ifodd\pageno  \advance\hoffset by \bindingoffset
+  \else \advance\hoffset by -\bindingoffset\fi
+  %
+  % Common context changes for both heading and footing.
+  % Do this outside of the \shipout so @code etc. will be expanded in
+  % the headline as they should be, not taken literally (outputting ''code).
+  \def\commmonheadfootline{\let\hsize=\pagewidth \texinfochars}
+  %
+  % Retrieve the information for the headings from the marks in the page,
+  % and call Plain TeX's \makeheadline and \makefootline, which use the
+  % values in \headline and \footline.
+  %
+  % This is used to check if we are on the first page of a chapter.
+  \ifcase0\topmark\fi
+  \ifx\thischapter\empty
+    % See comment for \gettopheadingmarks
+    \ifcase0\firstmark\fi
+    \let\curchaptername\thischaptername
+    \ifcase1\firstmark\fi
+    \let\prevchaptername\thischaptername
+  \else
+    \let\curchaptername\thischaptername
+    \ifcase1\topmark\fi
+    \let\prevchaptername\thischaptername
+  \fi
+  %
+  \ifodd\pageno \getoddheadingmarks \else \getevenheadingmarks \fi
+  \ifodd\pageno \getoddfootingmarks \else \getevenfootingmarks \fi
+  %
+  \ifx\curchaptername\prevchaptername
+    \let\thischapterheading\thischapter
+  \else
+    % \thischapterheading is the same as \thischapter except it is blank
+    % for the first page of a chapter.  This is to prevent the chapter name 
+    % being shown twice.
+    \def\thischapterheading{}%
+  \fi
+  %
+  \global\setbox\headlinebox = \vbox{\commmonheadfootline \makeheadline}%
+  \global\setbox\footlinebox = \vbox{\commmonheadfootline \makefootline}%
+  %
+  {%
+    % Set context for writing to auxiliary files like index files.
+    % Have to do this stuff outside the \shipout because we want it to
+    % take effect in \write's, yet the group defined by the \vbox ends
+    % before the \shipout runs.
+    %
+    \indexdummies         % don't expand commands in the output.
+    \normalturnoffactive  % \ in index entries must not stay \, e.g., if
+               % the page break happens to be in the middle of an example.
+               % We don't want .vr (or whatever) entries like this:
+               % \entry{{\indexbackslash }acronym}{32}{\code {\acronym}}
+               % "\acronym" won't work when it's read back in;
+               % it needs to be
+               % {\code {{\backslashcurfont }acronym}
+    \shipout\vbox{%
+      % Do this early so pdf references go to the beginning of the page.
+      \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi
+      %
+      \ifcropmarks \vbox to \outervsize\bgroup
+        \hsize = \outerhsize
+        \vskip-\topandbottommargin
+        \vtop to0pt{%
+          \line{\ewtop\hfil\ewtop}%
+          \nointerlineskip
+          \line{%
+            \vbox{\moveleft\cornerthick\nstop}%
+            \hfill
+            \vbox{\moveright\cornerthick\nstop}%
+          }%
+          \vss}%
+        \vskip\topandbottommargin
+        \line\bgroup
+          \hfil % center the page within the outer (page) hsize.
+          \ifodd\pageno\hskip\bindingoffset\fi
+          \vbox\bgroup
+      \fi
+      %
+      \unvbox\headlinebox
+      \pagebody{#1}%
+      \ifdim\ht\footlinebox > 0pt
+        % Only leave this space if the footline is nonempty.
+        % (We lessened \vsize for it in \oddfootingyyy.)
+        % The \baselineskip=24pt in plain's \makefootline has no effect.
+        \vskip 24pt
+        \unvbox\footlinebox
+      \fi
+      %
+      \ifcropmarks
+          \egroup % end of \vbox\bgroup
+        \hfil\egroup % end of (centering) \line\bgroup
+        \vskip\topandbottommargin plus1fill minus1fill
+        \boxmaxdepth = \cornerthick
+        \vbox to0pt{\vss
+          \line{%
+            \vbox{\moveleft\cornerthick\nsbot}%
+            \hfill
+            \vbox{\moveright\cornerthick\nsbot}%
+          }%
+          \nointerlineskip
+          \line{\ewbot\hfil\ewbot}%
+        }%
+      \egroup % \vbox from first cropmarks clause
+      \fi
+    }% end of \shipout\vbox
+  }% end of group with \indexdummies
+  \advancepageno
+  \ifnum\outputpenalty>-20000 \else\dosupereject\fi
+}
+
+\newinsert\margin \dimen\margin=\maxdimen
+
+% Main part of page, including any footnotes
+\def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}}
+{\catcode`\@ =11
+\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi
+% marginal hacks, juha@viisa.uucp (Juha Takala)
+\ifvoid\margin\else % marginal info is present
+  \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi
+\dimen@=\dp#1\relax \unvbox#1\relax
+\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
+\ifr@ggedbottom \kern-\dimen@ \vfil \fi}
+}
+
+% Here are the rules for the cropmarks.  Note that they are
+% offset so that the space between them is truly \outerhsize or \outervsize
+% (P. A. MacKay, 12 November, 1986)
+%
+\def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong}
+\def\nstop{\vbox
+  {\hrule height\cornerthick depth\cornerlong width\cornerthick}}
+\def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong}
+\def\nsbot{\vbox
+  {\hrule height\cornerlong depth\cornerthick width\cornerthick}}
+
+
+% Argument parsing
+
+% Parse an argument, then pass it to #1.  The argument is the rest of
+% the input line (except we remove a trailing comment).  #1 should be a
+% macro which expects an ordinary undelimited TeX argument.
+% For example, \def\foo{\parsearg\fooxxx}.
+%
+\def\parsearg{\parseargusing{}}
+\def\parseargusing#1#2{%
+  \def\argtorun{#2}%
+  \begingroup
+    \obeylines
+    \spaceisspace
+    #1%
+    \parseargline\empty% Insert the \empty token, see \finishparsearg below.
+}
+
+{\obeylines %
+  \gdef\parseargline#1^^M{%
+    \endgroup % End of the group started in \parsearg.
+    \argremovecomment #1\comment\ArgTerm%
+  }%
+}
+
+% First remove any @comment, then any @c comment.  Also remove a @texinfoc
+% comment (see \scanmacro for details).  Pass the result on to \argcheckspaces.
+\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm}
+\def\argremovec#1\c#2\ArgTerm{\argremovetexinfoc #1\texinfoc\ArgTerm}
+\def\argremovetexinfoc#1\texinfoc#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm}
+
+% Each occurrence of `\^^M' or `<space>\^^M' is replaced by a single space.
+%
+% \argremovec might leave us with trailing space, e.g.,
+%    @end itemize  @c foo
+% This space token undergoes the same procedure and is eventually removed
+% by \finishparsearg.
+%
+\def\argcheckspaces#1\^^M{\argcheckspacesX#1\^^M \^^M}
+\def\argcheckspacesX#1 \^^M{\argcheckspacesY#1\^^M}
+\def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{%
+  \def\temp{#3}%
+  \ifx\temp\empty
+    % Do not use \next, perhaps the caller of \parsearg uses it; reuse \temp:
+    \let\temp\finishparsearg
+  \else
+    \let\temp\argcheckspaces
+  \fi
+  % Put the space token in:
+  \temp#1 #3\ArgTerm
+}
+
+% If a _delimited_ argument is enclosed in braces, they get stripped; so
+% to get _exactly_ the rest of the line, we had to prevent such situation.
+% We prepended an \empty token at the very beginning and we expand it now,
+% just before passing the control to \argtorun.
+% (Similarly, we have to think about #3 of \argcheckspacesY above: it is
+% either the null string, or it ends with \^^M---thus there is no danger
+% that a pair of braces would be stripped.
+%
+% But first, we have to remove the trailing space token.
+%
+\def\finishparsearg#1 \ArgTerm{\expandafter\argtorun\expandafter{#1}}
+
+
+% \parseargdef - define a command taking an argument on the line
+%
+% \parseargdef\foo{...}
+%	is roughly equivalent to
+% \def\foo{\parsearg\Xfoo}
+% \def\Xfoo#1{...}
+\def\parseargdef#1{%
+  \expandafter \doparseargdef \csname\string#1\endcsname #1%
+}
+\def\doparseargdef#1#2{%
+  \def#2{\parsearg#1}%
+  \def#1##1%
+}
+
+% Several utility definitions with active space:
+{
+  \obeyspaces
+  \gdef\obeyedspace{ }
+
+  % Make each space character in the input produce a normal interword
+  % space in the output.  Don't allow a line break at this space, as this
+  % is used only in environments like @example, where each line of input
+  % should produce a line of output anyway.
+  %
+  \gdef\sepspaces{\obeyspaces\let =\tie}
+
+  % If an index command is used in an @example environment, any spaces
+  % therein should become regular spaces in the raw index file, not the
+  % expansion of \tie (\leavevmode \penalty \@M \ ).
+  \gdef\unsepspaces{\let =\space}
+}
+
+
+\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
+
+% Define the framework for environments in texinfo.tex.  It's used like this:
+%
+%   \envdef\foo{...}
+%   \def\Efoo{...}
+%
+% It's the responsibility of \envdef to insert \begingroup before the
+% actual body; @end closes the group after calling \Efoo.  \envdef also
+% defines \thisenv, so the current environment is known; @end checks
+% whether the environment name matches.  The \checkenv macro can also be
+% used to check whether the current environment is the one expected.
+%
+% Non-false conditionals (@iftex, @ifset) don't fit into this, so they
+% are not treated as environments; they don't open a group.  (The
+% implementation of @end takes care not to call \endgroup in this
+% special case.)
+
+
+% At run-time, environments start with this:
+\def\startenvironment#1{\begingroup\def\thisenv{#1}}
+% initialize
+\let\thisenv\empty
+
+% ... but they get defined via ``\envdef\foo{...}'':
+\long\def\envdef#1#2{\def#1{\startenvironment#1#2}}
+\def\envparseargdef#1#2{\parseargdef#1{\startenvironment#1#2}}
+
+% Check whether we're in the right environment:
+\def\checkenv#1{%
+  \def\temp{#1}%
+  \ifx\thisenv\temp
+  \else
+    \badenverr
+  \fi
+}
+
+% Environment mismatch, #1 expected:
+\def\badenverr{%
+  \errhelp = \EMsimple
+  \errmessage{This command can appear only \inenvironment\temp,
+    not \inenvironment\thisenv}%
+}
+\def\inenvironment#1{%
+  \ifx#1\empty
+    outside of any environment%
+  \else
+    in environment \expandafter\string#1%
+  \fi
+}
+
+% @end foo executes the definition of \Efoo.
+% But first, it executes a specialized version of \checkenv
+%
+\parseargdef\end{%
+  \if 1\csname iscond.#1\endcsname
+  \else
+    % The general wording of \badenverr may not be ideal.
+    \expandafter\checkenv\csname#1\endcsname
+    \csname E#1\endcsname
+    \endgroup
+  \fi
+}
+
+\newhelp\EMsimple{Press RETURN to continue.}
+
+
+% Be sure we're in horizontal mode when doing a tie, since we make space
+% equivalent to this in @example-like environments. Otherwise, a space
+% at the beginning of a line will start with \penalty -- and
+% since \penalty is valid in vertical mode, we'd end up putting the
+% penalty on the vertical list instead of in the new paragraph.
+{\catcode`@ = 11
+ % Avoid using \@M directly, because that causes trouble
+ % if the definition is written into an index file.
+ \global\let\tiepenalty = \@M
+ \gdef\tie{\leavevmode\penalty\tiepenalty\ }
+}
+
+% @: forces normal size whitespace following.
+\def\:{\spacefactor=1000 }
+
+% @* forces a line break.
+\def\*{\unskip\hfil\break\hbox{}\ignorespaces}
+
+% @/ allows a line break.
+\let\/=\allowbreak
+
+% @. is an end-of-sentence period.
+\def\.{.\spacefactor=\endofsentencespacefactor\space}
+
+% @! is an end-of-sentence bang.
+\def\!{!\spacefactor=\endofsentencespacefactor\space}
+
+% @? is an end-of-sentence query.
+\def\?{?\spacefactor=\endofsentencespacefactor\space}
+
+% @frenchspacing on|off  says whether to put extra space after punctuation.
+%
+\def\onword{on}
+\def\offword{off}
+%
+\parseargdef\frenchspacing{%
+  \def\temp{#1}%
+  \ifx\temp\onword \plainfrenchspacing
+  \else\ifx\temp\offword \plainnonfrenchspacing
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @frenchspacing option `\temp', must be on|off}%
+  \fi\fi
+}
+
+% @w prevents a word break.  Without the \leavevmode, @w at the
+% beginning of a paragraph, when TeX is still in vertical mode, would
+% produce a whole line of output instead of starting the paragraph.
+\def\w#1{\leavevmode\hbox{#1}}
+
+% @group ... @end group forces ... to be all on one page, by enclosing
+% it in a TeX vbox.  We use \vtop instead of \vbox to construct the box
+% to keep its height that of a normal line.  According to the rules for
+% \topskip (p.114 of the TeXbook), the glue inserted is
+% max (\topskip - \ht (first item), 0).  If that height is large,
+% therefore, no glue is inserted, and the space between the headline and
+% the text is small, which looks bad.
+%
+% Another complication is that the group might be very large.  This can
+% cause the glue on the previous page to be unduly stretched, because it
+% does not have much material.  In this case, it's better to add an
+% explicit \vfill so that the extra space is at the bottom.  The
+% threshold for doing this is if the group is more than \vfilllimit
+% percent of a page (\vfilllimit can be changed inside of @tex).
+%
+\newbox\groupbox
+\def\vfilllimit{0.7}
+%
+\envdef\group{%
+  \ifnum\catcode`\^^M=\active \else
+    \errhelp = \groupinvalidhelp
+    \errmessage{@group invalid in context where filling is enabled}%
+  \fi
+  \startsavinginserts
+  %
+  \setbox\groupbox = \vtop\bgroup
+    % Do @comment since we are called inside an environment such as
+    % @example, where each end-of-line in the input causes an
+    % end-of-line in the output.  We don't want the end-of-line after
+    % the `@group' to put extra space in the output.  Since @group
+    % should appear on a line by itself (according to the Texinfo
+    % manual), we don't worry about eating any user text.
+    \comment
+}
+%
+% The \vtop produces a box with normal height and large depth; thus, TeX puts
+% \baselineskip glue before it, and (when the next line of text is done)
+% \lineskip glue after it.  Thus, space below is not quite equal to space
+% above.  But it's pretty close.
+\def\Egroup{%
+    % To get correct interline space between the last line of the group
+    % and the first line afterwards, we have to propagate \prevdepth.
+    \endgraf % Not \par, as it may have been set to \lisppar.
+    \global\dimen1 = \prevdepth
+  \egroup           % End the \vtop.
+  \addgroupbox
+  \prevdepth = \dimen1
+  \checkinserts
+}
+
+\def\addgroupbox{
+  % \dimen0 is the vertical size of the group's box.
+  \dimen0 = \ht\groupbox  \advance\dimen0 by \dp\groupbox
+  % \dimen2 is how much space is left on the page (more or less).
+  \dimen2 = \pageheight   \advance\dimen2 by -\pagetotal
+  % if the group doesn't fit on the current page, and it's a big big
+  % group, force a page break.
+  \ifdim \dimen0 > \dimen2
+    \ifdim \pagetotal < \vfilllimit\pageheight
+      \page
+    \fi
+  \fi
+  \box\groupbox
+}
+
+%
+% TeX puts in an \escapechar (i.e., `@') at the beginning of the help
+% message, so this ends up printing `@group can only ...'.
+%
+\newhelp\groupinvalidhelp{%
+group can only be used in environments such as @example,^^J%
+where each line of input produces a line of output.}
+
+% @need space-in-mils
+% forces a page break if there is not space-in-mils remaining.
+
+\newdimen\mil  \mil=0.001in
+
+\parseargdef\need{%
+  % Ensure vertical mode, so we don't make a big box in the middle of a
+  % paragraph.
+  \par
+  %
+  % If the @need value is less than one line space, it's useless.
+  \dimen0 = #1\mil
+  \dimen2 = \ht\strutbox
+  \advance\dimen2 by \dp\strutbox
+  \ifdim\dimen0 > \dimen2
+    %
+    % Do a \strut just to make the height of this box be normal, so the
+    % normal leading is inserted relative to the preceding line.
+    % And a page break here is fine.
+    \vtop to #1\mil{\strut\vfil}%
+    %
+    % TeX does not even consider page breaks if a penalty added to the
+    % main vertical list is 10000 or more.  But in order to see if the
+    % empty box we just added fits on the page, we must make it consider
+    % page breaks.  On the other hand, we don't want to actually break the
+    % page after the empty box.  So we use a penalty of 9999.
+    %
+    % There is an extremely small chance that TeX will actually break the
+    % page at this \penalty, if there are no other feasible breakpoints in
+    % sight.  (If the user is using lots of big @group commands, which
+    % almost-but-not-quite fill up a page, TeX will have a hard time doing
+    % good page breaking, for example.)  However, I could not construct an
+    % example where a page broke at this \penalty; if it happens in a real
+    % document, then we can reconsider our strategy.
+    \penalty9999
+    %
+    % Back up by the size of the box, whether we did a page break or not.
+    \kern -#1\mil
+    %
+    % Do not allow a page break right after this kern.
+    \nobreak
+  \fi
+}
+
+% @br   forces paragraph break (and is undocumented).
+
+\let\br = \par
+
+% @page forces the start of a new page.
+%
+\def\page{\par\vfill\supereject}
+
+% @exdent text....
+% outputs text on separate line in roman font, starting at standard page margin
+
+% This records the amount of indent in the innermost environment.
+% That's how much \exdent should take out.
+\newskip\exdentamount
+
+% This defn is used inside fill environments such as @defun.
+\parseargdef\exdent{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}
+
+% This defn is used inside nofill environments such as @example.
+\parseargdef\nofillexdent{{\advance \leftskip by -\exdentamount
+  \leftline{\hskip\leftskip{\rm#1}}}}
+
+% @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current
+% paragraph.  For more general purposes, use the \margin insertion
+% class.  WHICH is `l' or `r'.  Not documented, written for gawk manual.
+%
+\newskip\inmarginspacing \inmarginspacing=1cm
+\def\strutdepth{\dp\strutbox}
+%
+\def\doinmargin#1#2{\strut\vadjust{%
+  \nobreak
+  \kern-\strutdepth
+  \vtop to \strutdepth{%
+    \baselineskip=\strutdepth
+    \vss
+    % if you have multiple lines of stuff to put here, you'll need to
+    % make the vbox yourself of the appropriate size.
+    \ifx#1l%
+      \llap{\ignorespaces #2\hskip\inmarginspacing}%
+    \else
+      \rlap{\hskip\hsize \hskip\inmarginspacing \ignorespaces #2}%
+    \fi
+    \null
+  }%
+}}
+\def\inleftmargin{\doinmargin l}
+\def\inrightmargin{\doinmargin r}
+%
+% @inmargin{TEXT [, RIGHT-TEXT]}
+% (if RIGHT-TEXT is given, use TEXT for left page, RIGHT-TEXT for right;
+% else use TEXT for both).
+%
+\def\inmargin#1{\parseinmargin #1,,\finish}
+\def\parseinmargin#1,#2,#3\finish{% not perfect, but better than nothing.
+  \setbox0 = \hbox{\ignorespaces #2}%
+  \ifdim\wd0 > 0pt
+    \def\lefttext{#1}%  have both texts
+    \def\righttext{#2}%
+  \else
+    \def\lefttext{#1}%  have only one text
+    \def\righttext{#1}%
+  \fi
+  %
+  \ifodd\pageno
+    \def\temp{\inrightmargin\righttext}% odd page -> outside is right margin
+  \else
+    \def\temp{\inleftmargin\lefttext}%
+  \fi
+  \temp
+}
+
+% @| inserts a changebar to the left of the current line.  It should
+% surround any changed text.  This approach does *not* work if the
+% change spans more than two lines of output.  To handle that, we would
+% have adopt a much more difficult approach (putting marks into the main
+% vertical list for the beginning and end of each change).  This command
+% is not documented, not supported, and doesn't work.
+%
+\def\|{%
+  % \vadjust can only be used in horizontal mode.
+  \leavevmode
+  %
+  % Append this vertical mode material after the current line in the output.
+  \vadjust{%
+    % We want to insert a rule with the height and depth of the current
+    % leading; that is exactly what \strutbox is supposed to record.
+    \vskip-\baselineskip
+    %
+    % \vadjust-items are inserted at the left edge of the type.  So
+    % the \llap here moves out into the left-hand margin.
+    \llap{%
+      %
+      % For a thicker or thinner bar, change the `1pt'.
+      \vrule height\baselineskip width1pt
+      %
+      % This is the space between the bar and the text.
+      \hskip 12pt
+    }%
+  }%
+}
+
+% @include FILE -- \input text of FILE.
+%
+\def\include{\parseargusing\filenamecatcodes\includezzz}
+\def\includezzz#1{%
+  \pushthisfilestack
+  \def\thisfile{#1}%
+  {%
+    \makevalueexpandable  % we want to expand any @value in FILE.
+    \turnoffactive        % and allow special characters in the expansion
+    \indexnofonts         % Allow `@@' and other weird things in file names.
+    \wlog{texinfo.tex: doing @include of #1^^J}%
+    \edef\temp{\noexpand\input #1 }%
+    %
+    % This trickery is to read FILE outside of a group, in case it makes
+    % definitions, etc.
+    \expandafter
+  }\temp
+  \popthisfilestack
+}
+\def\filenamecatcodes{%
+  \catcode`\\=\other
+  \catcode`~=\other
+  \catcode`^=\other
+  \catcode`_=\other
+  \catcode`|=\other
+  \catcode`<=\other
+  \catcode`>=\other
+  \catcode`+=\other
+  \catcode`-=\other
+  \catcode`\`=\other
+  \catcode`\'=\other
+}
+
+\def\pushthisfilestack{%
+  \expandafter\pushthisfilestackX\popthisfilestack\StackTerm
+}
+\def\pushthisfilestackX{%
+  \expandafter\pushthisfilestackY\thisfile\StackTerm
+}
+\def\pushthisfilestackY #1\StackTerm #2\StackTerm {%
+  \gdef\popthisfilestack{\gdef\thisfile{#1}\gdef\popthisfilestack{#2}}%
+}
+
+\def\popthisfilestack{\errthisfilestackempty}
+\def\errthisfilestackempty{\errmessage{Internal error:
+  the stack of filenames is empty.}}
+%
+\def\thisfile{}
+
+% @center line
+% outputs that line, centered.
+%
+\parseargdef\center{%
+  \ifhmode
+    \let\centersub\centerH
+  \else
+    \let\centersub\centerV
+  \fi
+  \centersub{\hfil \ignorespaces#1\unskip \hfil}%
+  \let\centersub\relax % don't let the definition persist, just in case
+}
+\def\centerH#1{{%
+  \hfil\break
+  \advance\hsize by -\leftskip
+  \advance\hsize by -\rightskip
+  \line{#1}%
+  \break
+}}
+%
+\newcount\centerpenalty
+\def\centerV#1{%
+  % The idea here is the same as in \startdefun, \cartouche, etc.: if
+  % @center is the first thing after a section heading, we need to wipe
+  % out the negative parskip inserted by \sectionheading, but still
+  % prevent a page break here.
+  \centerpenalty = \lastpenalty
+  \ifnum\centerpenalty>10000 \vskip\parskip \fi
+  \ifnum\centerpenalty>9999 \penalty\centerpenalty \fi
+  \line{\kern\leftskip #1\kern\rightskip}%
+}
+
+% @sp n   outputs n lines of vertical space
+%
+\parseargdef\sp{\vskip #1\baselineskip}
+
+% @comment ...line which is ignored...
+% @c is the same as @comment
+% @ignore ... @end ignore  is another way to write a comment
+%
+\def\comment{\begingroup \catcode`\^^M=\active%
+\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other\commentxxx}%
+
+{\catcode`\^^M=\active%
+\gdef\commentxxx#1^^M{\endgroup%
+\futurelet\nexttoken\commentxxxx}%
+\gdef\commentxxxx{\ifx\nexttoken\aftermacro\expandafter\comment\fi}%
+}
+
+\def\c{\begingroup \catcode`\^^M=\active%
+\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
+\cxxx}
+{\catcode`\^^M=\active \gdef\cxxx#1^^M{\endgroup}}
+% See comment in \scanmacro about why the definitions of @c and @comment differ
+
+% @paragraphindent NCHARS
+% We'll use ems for NCHARS, close enough.
+% NCHARS can also be the word `asis' or `none'.
+% We cannot feasibly implement @paragraphindent asis, though.
+%
+\def\asisword{asis} % no translation, these are keywords
+\def\noneword{none}
+%
+\parseargdef\paragraphindent{%
+  \def\temp{#1}%
+  \ifx\temp\asisword
+  \else
+    \ifx\temp\noneword
+      \defaultparindent = 0pt
+    \else
+      \defaultparindent = #1em
+    \fi
+  \fi
+  \parindent = \defaultparindent
+}
+
+% @exampleindent NCHARS
+% We'll use ems for NCHARS like @paragraphindent.
+% It seems @exampleindent asis isn't necessary, but
+% I preserve it to make it similar to @paragraphindent.
+\parseargdef\exampleindent{%
+  \def\temp{#1}%
+  \ifx\temp\asisword
+  \else
+    \ifx\temp\noneword
+      \lispnarrowing = 0pt
+    \else
+      \lispnarrowing = #1em
+    \fi
+  \fi
+}
+
+% @firstparagraphindent WORD
+% If WORD is `none', then suppress indentation of the first paragraph
+% after a section heading.  If WORD is `insert', then do indent at such
+% paragraphs.
+%
+% The paragraph indentation is suppressed or not by calling
+% \suppressfirstparagraphindent, which the sectioning commands do.
+% We switch the definition of this back and forth according to WORD.
+% By default, we suppress indentation.
+%
+\def\suppressfirstparagraphindent{\dosuppressfirstparagraphindent}
+\def\insertword{insert}
+%
+\parseargdef\firstparagraphindent{%
+  \def\temp{#1}%
+  \ifx\temp\noneword
+    \let\suppressfirstparagraphindent = \dosuppressfirstparagraphindent
+  \else\ifx\temp\insertword
+    \let\suppressfirstparagraphindent = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @firstparagraphindent option `\temp'}%
+  \fi\fi
+}
+
+% Here is how we actually suppress indentation.  Redefine \everypar to
+% \kern backwards by \parindent, and then reset itself to empty.
+%
+% We also make \indent itself not actually do anything until the next
+% paragraph.
+%
+\gdef\dosuppressfirstparagraphindent{%
+  \gdef\indent  {\restorefirstparagraphindent \indent}%
+  \gdef\noindent{\restorefirstparagraphindent \noindent}%
+  \global\everypar = {\kern -\parindent \restorefirstparagraphindent}%
+}
+%
+\gdef\restorefirstparagraphindent{%
+  \global\let\indent = \ptexindent
+  \global\let\noindent = \ptexnoindent
+  \global\everypar = {}%
+}
+
+
+% @refill is a no-op.
+\let\refill=\relax
+
+% @setfilename INFO-FILENAME - ignored
+\let\setfilename=\comment
+
+% @bye.
+\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
+
+
+\message{pdf,}
+% adobe `portable' document format
+\newcount\tempnum
+\newcount\lnkcount
+\newtoks\filename
+\newcount\filenamelength
+\newcount\pgn
+\newtoks\toksA
+\newtoks\toksB
+\newtoks\toksC
+\newtoks\toksD
+\newbox\boxA
+\newbox\boxB
+\newcount\countA
+\newif\ifpdf
+\newif\ifpdfmakepagedest
+
+% when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1
+% can be set).  So we test for \relax and 0 as well as being undefined.
+\ifx\pdfoutput\thisisundefined
+\else
+  \ifx\pdfoutput\relax
+  \else
+    \ifcase\pdfoutput
+    \else
+      \pdftrue
+    \fi
+  \fi
+\fi
+
+% PDF uses PostScript string constants for the names of xref targets,
+% for display in the outlines, and in other places.  Thus, we have to
+% double any backslashes.  Otherwise, a name like "\node" will be
+% interpreted as a newline (\n), followed by o, d, e.  Not good.
+% 
+% See http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html and
+% related messages.  The final outcome is that it is up to the TeX user
+% to double the backslashes and otherwise make the string valid, so
+% that's what we do.  pdftex 1.30.0 (ca.2005) introduced a primitive to
+% do this reliably, so we use it.
+
+% #1 is a control sequence in which to do the replacements,
+% which we \xdef.
+\def\txiescapepdf#1{%
+  \ifx\pdfescapestring\thisisundefined
+    % No primitive available; should we give a warning or log?
+    % Many times it won't matter.
+  \else
+    % The expandable \pdfescapestring primitive escapes parentheses,
+    % backslashes, and other special chars.
+    \xdef#1{\pdfescapestring{#1}}%
+  \fi
+}
+
+\newhelp\nopdfimagehelp{Texinfo supports .png, .jpg, .jpeg, and .pdf images
+with PDF output, and none of those formats could be found.  (.eps cannot
+be supported due to the design of the PDF format; use regular TeX (DVI
+output) for that.)}
+
+\ifpdf
+  %
+  % Color manipulation macros using ideas from pdfcolor.tex,
+  % except using rgb instead of cmyk; the latter is said to render as a
+  % very dark gray on-screen and a very dark halftone in print, instead
+  % of actual black. The dark red here is dark enough to print on paper as
+  % nearly black, but still distinguishable for online viewing.  We use
+  % black by default, though.
+  \def\rgbDarkRed{0.50 0.09 0.12}
+  \def\rgbBlack{0 0 0}
+  %
+  % k sets the color for filling (usual text, etc.);
+  % K sets the color for stroking (thin rules, e.g., normal _'s).
+  \def\pdfsetcolor#1{\pdfliteral{#1 rg  #1 RG}}
+  %
+  % Set color, and create a mark which defines \thiscolor accordingly,
+  % so that \makeheadline knows which color to restore.
+  \def\setcolor#1{%
+    \xdef\lastcolordefs{\gdef\noexpand\thiscolor{#1}}%
+    \domark
+    \pdfsetcolor{#1}%
+  }
+  %
+  \def\maincolor{\rgbBlack}
+  \pdfsetcolor{\maincolor}
+  \edef\thiscolor{\maincolor}
+  \def\lastcolordefs{}
+  %
+  \def\makefootline{%
+    \baselineskip24pt
+    \line{\pdfsetcolor{\maincolor}\the\footline}%
+  }
+  %
+  \def\makeheadline{%
+    \vbox to 0pt{%
+      \vskip-22.5pt
+      \line{%
+        \vbox to8.5pt{}%
+        % Extract \thiscolor definition from the marks.
+        \getcolormarks
+        % Typeset the headline with \maincolor, then restore the color.
+        \pdfsetcolor{\maincolor}\the\headline\pdfsetcolor{\thiscolor}%
+      }%
+      \vss
+    }%
+    \nointerlineskip
+  }
+  %
+  %
+  \pdfcatalog{/PageMode /UseOutlines}
+  %
+  % #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto).
+  \def\dopdfimage#1#2#3{%
+    \def\pdfimagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}%
+    \def\pdfimageheight{#3}\setbox2 = \hbox{\ignorespaces #3}%
+    %
+    % pdftex (and the PDF format) support .pdf, .png, .jpg (among
+    % others).  Let's try in that order, PDF first since if
+    % someone has a scalable image, presumably better to use that than a
+    % bitmap.
+    \let\pdfimgext=\empty
+    \begingroup
+      \openin 1 #1.pdf \ifeof 1
+        \openin 1 #1.PDF \ifeof 1
+          \openin 1 #1.png \ifeof 1
+            \openin 1 #1.jpg \ifeof 1
+              \openin 1 #1.jpeg \ifeof 1
+                \openin 1 #1.JPG \ifeof 1
+                  \errhelp = \nopdfimagehelp
+                  \errmessage{Could not find image file #1 for pdf}%
+                \else \gdef\pdfimgext{JPG}%
+                \fi
+              \else \gdef\pdfimgext{jpeg}%
+              \fi
+            \else \gdef\pdfimgext{jpg}%
+            \fi
+          \else \gdef\pdfimgext{png}%
+          \fi
+        \else \gdef\pdfimgext{PDF}%
+        \fi
+      \else \gdef\pdfimgext{pdf}%
+      \fi
+      \closein 1
+    \endgroup
+    %
+    % without \immediate, ancient pdftex seg faults when the same image is
+    % included twice.  (Version 3.14159-pre-1.0-unofficial-20010704.)
+    \ifnum\pdftexversion < 14
+      \immediate\pdfimage
+    \else
+      \immediate\pdfximage
+    \fi
+      \ifdim \wd0 >0pt width \pdfimagewidth \fi
+      \ifdim \wd2 >0pt height \pdfimageheight \fi
+      \ifnum\pdftexversion<13
+         #1.\pdfimgext
+       \else
+         {#1.\pdfimgext}%
+       \fi
+    \ifnum\pdftexversion < 14 \else
+      \pdfrefximage \pdflastximage
+    \fi}
+  %
+  \def\pdfmkdest#1{{%
+    % We have to set dummies so commands such as @code, and characters
+    % such as \, aren't expanded when present in a section title.
+    \indexnofonts
+    \turnoffactive
+    \makevalueexpandable
+    \def\pdfdestname{#1}%
+    \txiescapepdf\pdfdestname
+    \safewhatsit{\pdfdest name{\pdfdestname} xyz}%
+  }}
+  %
+  % used to mark target names; must be expandable.
+  \def\pdfmkpgn#1{#1}
+  %
+  % by default, use black for everything.
+  \def\urlcolor{\rgbBlack}
+  \def\linkcolor{\rgbBlack}
+  \def\endlink{\setcolor{\maincolor}\pdfendlink}
+  %
+  % Adding outlines to PDF; macros for calculating structure of outlines
+  % come from Petr Olsak
+  \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0%
+    \else \csname#1\endcsname \fi}
+  \def\advancenumber#1{\tempnum=\expnumber{#1}\relax
+    \advance\tempnum by 1
+    \expandafter\xdef\csname#1\endcsname{\the\tempnum}}
+  %
+  % #1 is the section text, which is what will be displayed in the
+  % outline by the pdf viewer.  #2 is the pdf expression for the number
+  % of subentries (or empty, for subsubsections).  #3 is the node text,
+  % which might be empty if this toc entry had no corresponding node.
+  % #4 is the page number
+  %
+  \def\dopdfoutline#1#2#3#4{%
+    % Generate a link to the node text if that exists; else, use the
+    % page number.  We could generate a destination for the section
+    % text in the case where a section has no node, but it doesn't
+    % seem worth the trouble, since most documents are normally structured.
+    \edef\pdfoutlinedest{#3}%
+    \ifx\pdfoutlinedest\empty
+      \def\pdfoutlinedest{#4}%
+    \else
+      \txiescapepdf\pdfoutlinedest
+    \fi
+    %
+    % Also escape PDF chars in the display string.
+    \edef\pdfoutlinetext{#1}%
+    \txiescapepdf\pdfoutlinetext
+    %
+    \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{\pdfoutlinetext}%
+  }
+  %
+  \def\pdfmakeoutlines{%
+    \begingroup
+      % Read toc silently, to get counts of subentries for \pdfoutline.
+      \def\partentry##1##2##3##4{}% ignore parts in the outlines
+      \def\numchapentry##1##2##3##4{%
+	\def\thischapnum{##2}%
+	\def\thissecnum{0}%
+	\def\thissubsecnum{0}%
+      }%
+      \def\numsecentry##1##2##3##4{%
+	\advancenumber{chap\thischapnum}%
+	\def\thissecnum{##2}%
+	\def\thissubsecnum{0}%
+      }%
+      \def\numsubsecentry##1##2##3##4{%
+	\advancenumber{sec\thissecnum}%
+	\def\thissubsecnum{##2}%
+      }%
+      \def\numsubsubsecentry##1##2##3##4{%
+	\advancenumber{subsec\thissubsecnum}%
+      }%
+      \def\thischapnum{0}%
+      \def\thissecnum{0}%
+      \def\thissubsecnum{0}%
+      %
+      % use \def rather than \let here because we redefine \chapentry et
+      % al. a second time, below.
+      \def\appentry{\numchapentry}%
+      \def\appsecentry{\numsecentry}%
+      \def\appsubsecentry{\numsubsecentry}%
+      \def\appsubsubsecentry{\numsubsubsecentry}%
+      \def\unnchapentry{\numchapentry}%
+      \def\unnsecentry{\numsecentry}%
+      \def\unnsubsecentry{\numsubsecentry}%
+      \def\unnsubsubsecentry{\numsubsubsecentry}%
+      \readdatafile{toc}%
+      %
+      % Read toc second time, this time actually producing the outlines.
+      % The `-' means take the \expnumber as the absolute number of
+      % subentries, which we calculated on our first read of the .toc above.
+      %
+      % We use the node names as the destinations.
+      \def\numchapentry##1##2##3##4{%
+        \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}%
+      \def\numsecentry##1##2##3##4{%
+        \dopdfoutline{##1}{count-\expnumber{sec##2}}{##3}{##4}}%
+      \def\numsubsecentry##1##2##3##4{%
+        \dopdfoutline{##1}{count-\expnumber{subsec##2}}{##3}{##4}}%
+      \def\numsubsubsecentry##1##2##3##4{% count is always zero
+        \dopdfoutline{##1}{}{##3}{##4}}%
+      %
+      % PDF outlines are displayed using system fonts, instead of
+      % document fonts.  Therefore we cannot use special characters,
+      % since the encoding is unknown.  For example, the eogonek from
+      % Latin 2 (0xea) gets translated to a | character.  Info from
+      % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100.
+      %
+      % TODO this right, we have to translate 8-bit characters to
+      % their "best" equivalent, based on the @documentencoding.  Too
+      % much work for too little return.  Just use the ASCII equivalents
+      % we use for the index sort strings.
+      % 
+      \indexnofonts
+      \setupdatafile
+      % We can have normal brace characters in the PDF outlines, unlike
+      % Texinfo index files.  So set that up.
+      \def\{{\lbracecharliteral}%
+      \def\}{\rbracecharliteral}%
+      \catcode`\\=\active \otherbackslash
+      \input \tocreadfilename
+    \endgroup
+  }
+  {\catcode`[=1 \catcode`]=2
+   \catcode`{=\other \catcode`}=\other
+   \gdef\lbracecharliteral[{]%
+   \gdef\rbracecharliteral[}]%
+  ]
+  %
+  \def\skipspaces#1{\def\PP{#1}\def\D{|}%
+    \ifx\PP\D\let\nextsp\relax
+    \else\let\nextsp\skipspaces
+      \addtokens{\filename}{\PP}%
+      \advance\filenamelength by 1
+    \fi
+    \nextsp}
+  \def\getfilename#1{%
+    \filenamelength=0
+    % If we don't expand the argument now, \skipspaces will get
+    % snagged on things like "@value{foo}".
+    \edef\temp{#1}%
+    \expandafter\skipspaces\temp|\relax
+  }
+  \ifnum\pdftexversion < 14
+    \let \startlink \pdfannotlink
+  \else
+    \let \startlink \pdfstartlink
+  \fi
+  % make a live url in pdf output.
+  \def\pdfurl#1{%
+    \begingroup
+      % it seems we really need yet another set of dummies; have not
+      % tried to figure out what each command should do in the context
+      % of @url.  for now, just make @/ a no-op, that's the only one
+      % people have actually reported a problem with.
+      %
+      \normalturnoffactive
+      \def\@{@}%
+      \let\/=\empty
+      \makevalueexpandable
+      % do we want to go so far as to use \indexnofonts instead of just
+      % special-casing \var here?
+      \def\var##1{##1}%
+      %
+      \leavevmode\setcolor{\urlcolor}%
+      \startlink attr{/Border [0 0 0]}%
+        user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
+    \endgroup}
+  \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}}
+  \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
+  \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks}
+  \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}}
+  \def\maketoks{%
+    \expandafter\poptoks\the\toksA|ENDTOKS|\relax
+    \ifx\first0\adn0
+    \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3
+    \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6
+    \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9
+    \else
+      \ifnum0=\countA\else\makelink\fi
+      \ifx\first.\let\next=\done\else
+        \let\next=\maketoks
+        \addtokens{\toksB}{\the\toksD}
+        \ifx\first,\addtokens{\toksB}{\space}\fi
+      \fi
+    \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
+    \next}
+  \def\makelink{\addtokens{\toksB}%
+    {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
+  \def\pdflink#1{%
+    \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}}
+    \setcolor{\linkcolor}#1\endlink}
+  \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
+\else
+  % non-pdf mode
+  \let\pdfmkdest = \gobble
+  \let\pdfurl = \gobble
+  \let\endlink = \relax
+  \let\setcolor = \gobble
+  \let\pdfsetcolor = \gobble
+  \let\pdfmakeoutlines = \relax
+\fi  % \ifx\pdfoutput
+
+
+\message{fonts,}
+
+% Change the current font style to #1, remembering it in \curfontstyle.
+% For now, we do not accumulate font styles: @b{@i{foo}} prints foo in
+% italics, not bold italics.
+%
+\def\setfontstyle#1{%
+  \def\curfontstyle{#1}% not as a control sequence, because we are \edef'd.
+  \csname ten#1\endcsname  % change the current font
+}
+
+% Select #1 fonts with the current style.
+%
+\def\selectfonts#1{\csname #1fonts\endcsname \csname\curfontstyle\endcsname}
+
+\def\rm{\fam=0 \setfontstyle{rm}}
+\def\it{\fam=\itfam \setfontstyle{it}}
+\def\sl{\fam=\slfam \setfontstyle{sl}}
+\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf}
+\def\tt{\fam=\ttfam \setfontstyle{tt}}
+
+% Unfortunately, we have to override this for titles and the like, since
+% in those cases "rm" is bold.  Sigh.
+\def\rmisbold{\rm\def\curfontstyle{bf}}
+
+% Texinfo sort of supports the sans serif font style, which plain TeX does not.
+% So we set up a \sf.
+\newfam\sffam
+\def\sf{\fam=\sffam \setfontstyle{sf}}
+\let\li = \sf % Sometimes we call it \li, not \sf.
+
+% We don't need math for this font style.
+\def\ttsl{\setfontstyle{ttsl}}
+
+
+% Set the baselineskip to #1, and the lineskip and strut size
+% correspondingly.  There is no deep meaning behind these magic numbers
+% used as factors; they just match (closely enough) what Knuth defined.
+%
+\def\lineskipfactor{.08333}
+\def\strutheightpercent{.70833}
+\def\strutdepthpercent {.29167}
+%
+% can get a sort of poor man's double spacing by redefining this.
+\def\baselinefactor{1}
+%
+\newdimen\textleading
+\def\setleading#1{%
+  \dimen0 = #1\relax
+  \normalbaselineskip = \baselinefactor\dimen0
+  \normallineskip = \lineskipfactor\normalbaselineskip
+  \normalbaselines
+  \setbox\strutbox =\hbox{%
+    \vrule width0pt height\strutheightpercent\baselineskip
+                    depth \strutdepthpercent \baselineskip
+  }%
+}
+
+% PDF CMaps.  See also LaTeX's t1.cmap.
+%
+% do nothing with this by default.
+\expandafter\let\csname cmapOT1\endcsname\gobble
+\expandafter\let\csname cmapOT1IT\endcsname\gobble
+\expandafter\let\csname cmapOT1TT\endcsname\gobble
+
+% if we are producing pdf, and we have \pdffontattr, then define cmaps.
+% (\pdffontattr was introduced many years ago, but people still run
+% older pdftex's; it's easy to conditionalize, so we do.)
+\ifpdf \ifx\pdffontattr\thisisundefined \else
+  \begingroup
+    \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
+    \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
+%%DocumentNeededResources: ProcSet (CIDInit)
+%%IncludeResource: ProcSet (CIDInit)
+%%BeginResource: CMap (TeX-OT1-0)
+%%Title: (TeX-OT1-0 TeX OT1 0)
+%%Version: 1.000
+%%EndComments
+/CIDInit /ProcSet findresource begin
+12 dict begin
+begincmap
+/CIDSystemInfo
+<< /Registry (TeX)
+/Ordering (OT1)
+/Supplement 0
+>> def
+/CMapName /TeX-OT1-0 def
+/CMapType 2 def
+1 begincodespacerange
+<00> <7F>
+endcodespacerange
+8 beginbfrange
+<00> <01> <0393>
+<09> <0A> <03A8>
+<23> <26> <0023>
+<28> <3B> <0028>
+<3F> <5B> <003F>
+<5D> <5E> <005D>
+<61> <7A> <0061>
+<7B> <7C> <2013>
+endbfrange
+40 beginbfchar
+<02> <0398>
+<03> <039B>
+<04> <039E>
+<05> <03A0>
+<06> <03A3>
+<07> <03D2>
+<08> <03A6>
+<0B> <00660066>
+<0C> <00660069>
+<0D> <0066006C>
+<0E> <006600660069>
+<0F> <00660066006C>
+<10> <0131>
+<11> <0237>
+<12> <0060>
+<13> <00B4>
+<14> <02C7>
+<15> <02D8>
+<16> <00AF>
+<17> <02DA>
+<18> <00B8>
+<19> <00DF>
+<1A> <00E6>
+<1B> <0153>
+<1C> <00F8>
+<1D> <00C6>
+<1E> <0152>
+<1F> <00D8>
+<21> <0021>
+<22> <201D>
+<27> <2019>
+<3C> <00A1>
+<3D> <003D>
+<3E> <00BF>
+<5C> <201C>
+<5F> <02D9>
+<60> <2018>
+<7D> <02DD>
+<7E> <007E>
+<7F> <00A8>
+endbfchar
+endcmap
+CMapName currentdict /CMap defineresource pop
+end
+end
+%%EndResource
+%%EOF
+    }\endgroup
+  \expandafter\edef\csname cmapOT1\endcsname#1{%
+    \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
+  }%
+%
+% \cmapOT1IT
+  \begingroup
+    \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
+    \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
+%%DocumentNeededResources: ProcSet (CIDInit)
+%%IncludeResource: ProcSet (CIDInit)
+%%BeginResource: CMap (TeX-OT1IT-0)
+%%Title: (TeX-OT1IT-0 TeX OT1IT 0)
+%%Version: 1.000
+%%EndComments
+/CIDInit /ProcSet findresource begin
+12 dict begin
+begincmap
+/CIDSystemInfo
+<< /Registry (TeX)
+/Ordering (OT1IT)
+/Supplement 0
+>> def
+/CMapName /TeX-OT1IT-0 def
+/CMapType 2 def
+1 begincodespacerange
+<00> <7F>
+endcodespacerange
+8 beginbfrange
+<00> <01> <0393>
+<09> <0A> <03A8>
+<25> <26> <0025>
+<28> <3B> <0028>
+<3F> <5B> <003F>
+<5D> <5E> <005D>
+<61> <7A> <0061>
+<7B> <7C> <2013>
+endbfrange
+42 beginbfchar
+<02> <0398>
+<03> <039B>
+<04> <039E>
+<05> <03A0>
+<06> <03A3>
+<07> <03D2>
+<08> <03A6>
+<0B> <00660066>
+<0C> <00660069>
+<0D> <0066006C>
+<0E> <006600660069>
+<0F> <00660066006C>
+<10> <0131>
+<11> <0237>
+<12> <0060>
+<13> <00B4>
+<14> <02C7>
+<15> <02D8>
+<16> <00AF>
+<17> <02DA>
+<18> <00B8>
+<19> <00DF>
+<1A> <00E6>
+<1B> <0153>
+<1C> <00F8>
+<1D> <00C6>
+<1E> <0152>
+<1F> <00D8>
+<21> <0021>
+<22> <201D>
+<23> <0023>
+<24> <00A3>
+<27> <2019>
+<3C> <00A1>
+<3D> <003D>
+<3E> <00BF>
+<5C> <201C>
+<5F> <02D9>
+<60> <2018>
+<7D> <02DD>
+<7E> <007E>
+<7F> <00A8>
+endbfchar
+endcmap
+CMapName currentdict /CMap defineresource pop
+end
+end
+%%EndResource
+%%EOF
+    }\endgroup
+  \expandafter\edef\csname cmapOT1IT\endcsname#1{%
+    \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
+  }%
+%
+% \cmapOT1TT
+  \begingroup
+    \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
+    \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
+%%DocumentNeededResources: ProcSet (CIDInit)
+%%IncludeResource: ProcSet (CIDInit)
+%%BeginResource: CMap (TeX-OT1TT-0)
+%%Title: (TeX-OT1TT-0 TeX OT1TT 0)
+%%Version: 1.000
+%%EndComments
+/CIDInit /ProcSet findresource begin
+12 dict begin
+begincmap
+/CIDSystemInfo
+<< /Registry (TeX)
+/Ordering (OT1TT)
+/Supplement 0
+>> def
+/CMapName /TeX-OT1TT-0 def
+/CMapType 2 def
+1 begincodespacerange
+<00> <7F>
+endcodespacerange
+5 beginbfrange
+<00> <01> <0393>
+<09> <0A> <03A8>
+<21> <26> <0021>
+<28> <5F> <0028>
+<61> <7E> <0061>
+endbfrange
+32 beginbfchar
+<02> <0398>
+<03> <039B>
+<04> <039E>
+<05> <03A0>
+<06> <03A3>
+<07> <03D2>
+<08> <03A6>
+<0B> <2191>
+<0C> <2193>
+<0D> <0027>
+<0E> <00A1>
+<0F> <00BF>
+<10> <0131>
+<11> <0237>
+<12> <0060>
+<13> <00B4>
+<14> <02C7>
+<15> <02D8>
+<16> <00AF>
+<17> <02DA>
+<18> <00B8>
+<19> <00DF>
+<1A> <00E6>
+<1B> <0153>
+<1C> <00F8>
+<1D> <00C6>
+<1E> <0152>
+<1F> <00D8>
+<20> <2423>
+<27> <2019>
+<60> <2018>
+<7F> <00A8>
+endbfchar
+endcmap
+CMapName currentdict /CMap defineresource pop
+end
+end
+%%EndResource
+%%EOF
+    }\endgroup
+  \expandafter\edef\csname cmapOT1TT\endcsname#1{%
+    \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
+  }%
+\fi\fi
+
+
+% Set the font macro #1 to the font named \fontprefix#2.
+% #3 is the font's design size, #4 is a scale factor, #5 is the CMap
+% encoding (only OT1, OT1IT and OT1TT are allowed, or empty to omit).
+% Example:
+% #1 = \textrm
+% #2 = \rmshape
+% #3 = 10
+% #4 = \mainmagstep
+% #5 = OT1
+%
+\def\setfont#1#2#3#4#5{%
+  \font#1=\fontprefix#2#3 scaled #4
+  \csname cmap#5\endcsname#1%
+}
+% This is what gets called when #5 of \setfont is empty.
+\let\cmap\gobble
+%
+% (end of cmaps)
+
+% Use cm as the default font prefix.
+% To specify the font prefix, you must define \fontprefix
+% before you read in texinfo.tex.
+\ifx\fontprefix\thisisundefined
+\def\fontprefix{cm}
+\fi
+% Support font families that don't use the same naming scheme as CM.
+\def\rmshape{r}
+\def\rmbshape{bx}               % where the normal face is bold
+\def\bfshape{b}
+\def\bxshape{bx}
+\def\ttshape{tt}
+\def\ttbshape{tt}
+\def\ttslshape{sltt}
+\def\itshape{ti}
+\def\itbshape{bxti}
+\def\slshape{sl}
+\def\slbshape{bxsl}
+\def\sfshape{ss}
+\def\sfbshape{ss}
+\def\scshape{csc}
+\def\scbshape{csc}
+
+% Definitions for a main text size of 11pt.  (The default in Texinfo.)
+%
+\def\definetextfontsizexi{%
+% Text fonts (11.2pt, magstep1).
+\def\textnominalsize{11pt}
+\edef\mainmagstep{\magstephalf}
+\setfont\textrm\rmshape{10}{\mainmagstep}{OT1}
+\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT}
+\setfont\textbf\bfshape{10}{\mainmagstep}{OT1}
+\setfont\textit\itshape{10}{\mainmagstep}{OT1IT}
+\setfont\textsl\slshape{10}{\mainmagstep}{OT1}
+\setfont\textsf\sfshape{10}{\mainmagstep}{OT1}
+\setfont\textsc\scshape{10}{\mainmagstep}{OT1}
+\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT}
+\font\texti=cmmi10 scaled \mainmagstep
+\font\textsy=cmsy10 scaled \mainmagstep
+\def\textecsize{1095}
+
+% A few fonts for @defun names and args.
+\setfont\defbf\bfshape{10}{\magstep1}{OT1}
+\setfont\deftt\ttshape{10}{\magstep1}{OT1TT}
+\setfont\defsl\slshape{10}{\magstep1}{OT1TT}
+\setfont\defttsl\ttslshape{10}{\magstep1}{OT1TT}
+\def\df{\let\tentt=\deftt \let\tenbf = \defbf
+\let\tenttsl=\defttsl \let\tensl=\defsl \bf}
+
+% Fonts for indices, footnotes, small examples (9pt).
+\def\smallnominalsize{9pt}
+\setfont\smallrm\rmshape{9}{1000}{OT1}
+\setfont\smalltt\ttshape{9}{1000}{OT1TT}
+\setfont\smallbf\bfshape{10}{900}{OT1}
+\setfont\smallit\itshape{9}{1000}{OT1IT}
+\setfont\smallsl\slshape{9}{1000}{OT1}
+\setfont\smallsf\sfshape{9}{1000}{OT1}
+\setfont\smallsc\scshape{10}{900}{OT1}
+\setfont\smallttsl\ttslshape{10}{900}{OT1TT}
+\font\smalli=cmmi9
+\font\smallsy=cmsy9
+\def\smallecsize{0900}
+
+% Fonts for small examples (8pt).
+\def\smallernominalsize{8pt}
+\setfont\smallerrm\rmshape{8}{1000}{OT1}
+\setfont\smallertt\ttshape{8}{1000}{OT1TT}
+\setfont\smallerbf\bfshape{10}{800}{OT1}
+\setfont\smallerit\itshape{8}{1000}{OT1IT}
+\setfont\smallersl\slshape{8}{1000}{OT1}
+\setfont\smallersf\sfshape{8}{1000}{OT1}
+\setfont\smallersc\scshape{10}{800}{OT1}
+\setfont\smallerttsl\ttslshape{10}{800}{OT1TT}
+\font\smalleri=cmmi8
+\font\smallersy=cmsy8
+\def\smallerecsize{0800}
+
+% Fonts for title page (20.4pt):
+\def\titlenominalsize{20pt}
+\setfont\titlerm\rmbshape{12}{\magstep3}{OT1}
+\setfont\titleit\itbshape{10}{\magstep4}{OT1IT}
+\setfont\titlesl\slbshape{10}{\magstep4}{OT1}
+\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT}
+\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT}
+\setfont\titlesf\sfbshape{17}{\magstep1}{OT1}
+\let\titlebf=\titlerm
+\setfont\titlesc\scbshape{10}{\magstep4}{OT1}
+\font\titlei=cmmi12 scaled \magstep3
+\font\titlesy=cmsy10 scaled \magstep4
+\def\titleecsize{2074}
+
+% Chapter (and unnumbered) fonts (17.28pt).
+\def\chapnominalsize{17pt}
+\setfont\chaprm\rmbshape{12}{\magstep2}{OT1}
+\setfont\chapit\itbshape{10}{\magstep3}{OT1IT}
+\setfont\chapsl\slbshape{10}{\magstep3}{OT1}
+\setfont\chaptt\ttbshape{12}{\magstep2}{OT1TT}
+\setfont\chapttsl\ttslshape{10}{\magstep3}{OT1TT}
+\setfont\chapsf\sfbshape{17}{1000}{OT1}
+\let\chapbf=\chaprm
+\setfont\chapsc\scbshape{10}{\magstep3}{OT1}
+\font\chapi=cmmi12 scaled \magstep2
+\font\chapsy=cmsy10 scaled \magstep3
+\def\chapecsize{1728}
+
+% Section fonts (14.4pt).
+\def\secnominalsize{14pt}
+\setfont\secrm\rmbshape{12}{\magstep1}{OT1}
+\setfont\secrmnotbold\rmshape{12}{\magstep1}{OT1}
+\setfont\secit\itbshape{10}{\magstep2}{OT1IT}
+\setfont\secsl\slbshape{10}{\magstep2}{OT1}
+\setfont\sectt\ttbshape{12}{\magstep1}{OT1TT}
+\setfont\secttsl\ttslshape{10}{\magstep2}{OT1TT}
+\setfont\secsf\sfbshape{12}{\magstep1}{OT1}
+\let\secbf\secrm
+\setfont\secsc\scbshape{10}{\magstep2}{OT1}
+\font\seci=cmmi12 scaled \magstep1
+\font\secsy=cmsy10 scaled \magstep2
+\def\sececsize{1440}
+
+% Subsection fonts (13.15pt).
+\def\ssecnominalsize{13pt}
+\setfont\ssecrm\rmbshape{12}{\magstephalf}{OT1}
+\setfont\ssecit\itbshape{10}{1315}{OT1IT}
+\setfont\ssecsl\slbshape{10}{1315}{OT1}
+\setfont\ssectt\ttbshape{12}{\magstephalf}{OT1TT}
+\setfont\ssecttsl\ttslshape{10}{1315}{OT1TT}
+\setfont\ssecsf\sfbshape{12}{\magstephalf}{OT1}
+\let\ssecbf\ssecrm
+\setfont\ssecsc\scbshape{10}{1315}{OT1}
+\font\sseci=cmmi12 scaled \magstephalf
+\font\ssecsy=cmsy10 scaled 1315
+\def\ssececsize{1200}
+
+% Reduced fonts for @acro in text (10pt).
+\def\reducednominalsize{10pt}
+\setfont\reducedrm\rmshape{10}{1000}{OT1}
+\setfont\reducedtt\ttshape{10}{1000}{OT1TT}
+\setfont\reducedbf\bfshape{10}{1000}{OT1}
+\setfont\reducedit\itshape{10}{1000}{OT1IT}
+\setfont\reducedsl\slshape{10}{1000}{OT1}
+\setfont\reducedsf\sfshape{10}{1000}{OT1}
+\setfont\reducedsc\scshape{10}{1000}{OT1}
+\setfont\reducedttsl\ttslshape{10}{1000}{OT1TT}
+\font\reducedi=cmmi10
+\font\reducedsy=cmsy10
+\def\reducedecsize{1000}
+
+\textleading = 13.2pt % line spacing for 11pt CM
+\textfonts            % reset the current fonts
+\rm
+} % end of 11pt text font size definitions, \definetextfontsizexi
+
+
+% Definitions to make the main text be 10pt Computer Modern, with
+% section, chapter, etc., sizes following suit.  This is for the GNU
+% Press printing of the Emacs 22 manual.  Maybe other manuals in the
+% future.  Used with @smallbook, which sets the leading to 12pt.
+%
+\def\definetextfontsizex{%
+% Text fonts (10pt).
+\def\textnominalsize{10pt}
+\edef\mainmagstep{1000}
+\setfont\textrm\rmshape{10}{\mainmagstep}{OT1}
+\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT}
+\setfont\textbf\bfshape{10}{\mainmagstep}{OT1}
+\setfont\textit\itshape{10}{\mainmagstep}{OT1IT}
+\setfont\textsl\slshape{10}{\mainmagstep}{OT1}
+\setfont\textsf\sfshape{10}{\mainmagstep}{OT1}
+\setfont\textsc\scshape{10}{\mainmagstep}{OT1}
+\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT}
+\font\texti=cmmi10 scaled \mainmagstep
+\font\textsy=cmsy10 scaled \mainmagstep
+\def\textecsize{1000}
+
+% A few fonts for @defun names and args.
+\setfont\defbf\bfshape{10}{\magstephalf}{OT1}
+\setfont\deftt\ttshape{10}{\magstephalf}{OT1TT}
+\setfont\defsl\slshape{10}{\magstephalf}{OT1TT}
+\setfont\defttsl\ttslshape{10}{\magstephalf}{OT1TT}
+\def\df{\let\tentt=\deftt \let\tenbf = \defbf
+\let\tensl=\defsl \let\tenttsl=\defttsl \bf}
+
+% Fonts for indices, footnotes, small examples (9pt).
+\def\smallnominalsize{9pt}
+\setfont\smallrm\rmshape{9}{1000}{OT1}
+\setfont\smalltt\ttshape{9}{1000}{OT1TT}
+\setfont\smallbf\bfshape{10}{900}{OT1}
+\setfont\smallit\itshape{9}{1000}{OT1IT}
+\setfont\smallsl\slshape{9}{1000}{OT1}
+\setfont\smallsf\sfshape{9}{1000}{OT1}
+\setfont\smallsc\scshape{10}{900}{OT1}
+\setfont\smallttsl\ttslshape{10}{900}{OT1TT}
+\font\smalli=cmmi9
+\font\smallsy=cmsy9
+\def\smallecsize{0900}
+
+% Fonts for small examples (8pt).
+\def\smallernominalsize{8pt}
+\setfont\smallerrm\rmshape{8}{1000}{OT1}
+\setfont\smallertt\ttshape{8}{1000}{OT1TT}
+\setfont\smallerbf\bfshape{10}{800}{OT1}
+\setfont\smallerit\itshape{8}{1000}{OT1IT}
+\setfont\smallersl\slshape{8}{1000}{OT1}
+\setfont\smallersf\sfshape{8}{1000}{OT1}
+\setfont\smallersc\scshape{10}{800}{OT1}
+\setfont\smallerttsl\ttslshape{10}{800}{OT1TT}
+\font\smalleri=cmmi8
+\font\smallersy=cmsy8
+\def\smallerecsize{0800}
+
+% Fonts for title page (20.4pt):
+\def\titlenominalsize{20pt}
+\setfont\titlerm\rmbshape{12}{\magstep3}{OT1}
+\setfont\titleit\itbshape{10}{\magstep4}{OT1IT}
+\setfont\titlesl\slbshape{10}{\magstep4}{OT1}
+\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT}
+\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT}
+\setfont\titlesf\sfbshape{17}{\magstep1}{OT1}
+\let\titlebf=\titlerm
+\setfont\titlesc\scbshape{10}{\magstep4}{OT1}
+\font\titlei=cmmi12 scaled \magstep3
+\font\titlesy=cmsy10 scaled \magstep4
+\def\titleecsize{2074}
+
+% Chapter fonts (14.4pt).
+\def\chapnominalsize{14pt}
+\setfont\chaprm\rmbshape{12}{\magstep1}{OT1}
+\setfont\chapit\itbshape{10}{\magstep2}{OT1IT}
+\setfont\chapsl\slbshape{10}{\magstep2}{OT1}
+\setfont\chaptt\ttbshape{12}{\magstep1}{OT1TT}
+\setfont\chapttsl\ttslshape{10}{\magstep2}{OT1TT}
+\setfont\chapsf\sfbshape{12}{\magstep1}{OT1}
+\let\chapbf\chaprm
+\setfont\chapsc\scbshape{10}{\magstep2}{OT1}
+\font\chapi=cmmi12 scaled \magstep1
+\font\chapsy=cmsy10 scaled \magstep2
+\def\chapecsize{1440}
+
+% Section fonts (12pt).
+\def\secnominalsize{12pt}
+\setfont\secrm\rmbshape{12}{1000}{OT1}
+\setfont\secit\itbshape{10}{\magstep1}{OT1IT}
+\setfont\secsl\slbshape{10}{\magstep1}{OT1}
+\setfont\sectt\ttbshape{12}{1000}{OT1TT}
+\setfont\secttsl\ttslshape{10}{\magstep1}{OT1TT}
+\setfont\secsf\sfbshape{12}{1000}{OT1}
+\let\secbf\secrm
+\setfont\secsc\scbshape{10}{\magstep1}{OT1}
+\font\seci=cmmi12
+\font\secsy=cmsy10 scaled \magstep1
+\def\sececsize{1200}
+
+% Subsection fonts (10pt).
+\def\ssecnominalsize{10pt}
+\setfont\ssecrm\rmbshape{10}{1000}{OT1}
+\setfont\ssecit\itbshape{10}{1000}{OT1IT}
+\setfont\ssecsl\slbshape{10}{1000}{OT1}
+\setfont\ssectt\ttbshape{10}{1000}{OT1TT}
+\setfont\ssecttsl\ttslshape{10}{1000}{OT1TT}
+\setfont\ssecsf\sfbshape{10}{1000}{OT1}
+\let\ssecbf\ssecrm
+\setfont\ssecsc\scbshape{10}{1000}{OT1}
+\font\sseci=cmmi10
+\font\ssecsy=cmsy10
+\def\ssececsize{1000}
+
+% Reduced fonts for @acro in text (9pt).
+\def\reducednominalsize{9pt}
+\setfont\reducedrm\rmshape{9}{1000}{OT1}
+\setfont\reducedtt\ttshape{9}{1000}{OT1TT}
+\setfont\reducedbf\bfshape{10}{900}{OT1}
+\setfont\reducedit\itshape{9}{1000}{OT1IT}
+\setfont\reducedsl\slshape{9}{1000}{OT1}
+\setfont\reducedsf\sfshape{9}{1000}{OT1}
+\setfont\reducedsc\scshape{10}{900}{OT1}
+\setfont\reducedttsl\ttslshape{10}{900}{OT1TT}
+\font\reducedi=cmmi9
+\font\reducedsy=cmsy9
+\def\reducedecsize{0900}
+
+\divide\parskip by 2  % reduce space between paragraphs
+\textleading = 12pt   % line spacing for 10pt CM
+\textfonts            % reset the current fonts
+\rm
+} % end of 10pt text font size definitions, \definetextfontsizex
+
+
+% We provide the user-level command
+%   @fonttextsize 10
+% (or 11) to redefine the text font size.  pt is assumed.
+%
+\def\xiword{11}
+\def\xword{10}
+\def\xwordpt{10pt}
+%
+\parseargdef\fonttextsize{%
+  \def\textsizearg{#1}%
+  %\wlog{doing @fonttextsize \textsizearg}%
+  %
+  % Set \globaldefs so that documents can use this inside @tex, since
+  % makeinfo 4.8 does not support it, but we need it nonetheless.
+  %
+ \begingroup \globaldefs=1
+  \ifx\textsizearg\xword \definetextfontsizex
+  \else \ifx\textsizearg\xiword \definetextfontsizexi
+  \else
+    \errhelp=\EMsimple
+    \errmessage{@fonttextsize only supports `10' or `11', not `\textsizearg'}
+  \fi\fi
+ \endgroup
+}
+
+% In order for the font changes to affect most math symbols and letters,
+% we have to define the \textfont of the standard families.  We don't
+% bother to reset \scriptfont and \scriptscriptfont; awaiting user need.
+%
+\def\resetmathfonts{%
+  \textfont0=\tenrm \textfont1=\teni \textfont2=\tensy
+  \textfont\itfam=\tenit \textfont\slfam=\tensl \textfont\bffam=\tenbf
+  \textfont\ttfam=\tentt \textfont\sffam=\tensf
+}
+
+% The font-changing commands redefine the meanings of \tenSTYLE, instead
+% of just \STYLE.  We do this because \STYLE needs to also set the
+% current \fam for math mode.  Our \STYLE (e.g., \rm) commands hardwire
+% \tenSTYLE to set the current font.
+%
+% Each font-changing command also sets the names \lsize (one size lower)
+% and \lllsize (three sizes lower).  These relative commands are used
+% in, e.g., the LaTeX logo and acronyms.
+%
+% This all needs generalizing, badly.
+%
+\def\textfonts{%
+  \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
+  \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
+  \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy
+  \let\tenttsl=\textttsl
+  \def\curfontsize{text}%
+  \def\lsize{reduced}\def\lllsize{smaller}%
+  \resetmathfonts \setleading{\textleading}}
+\def\titlefonts{%
+  \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl
+  \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc
+  \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy
+  \let\tenttsl=\titlettsl
+  \def\curfontsize{title}%
+  \def\lsize{chap}\def\lllsize{subsec}%
+  \resetmathfonts \setleading{27pt}}
+\def\titlefont#1{{\titlefonts\rmisbold #1}}
+\def\chapfonts{%
+  \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
+  \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
+  \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy
+  \let\tenttsl=\chapttsl
+  \def\curfontsize{chap}%
+  \def\lsize{sec}\def\lllsize{text}%
+  \resetmathfonts \setleading{19pt}}
+\def\secfonts{%
+  \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl
+  \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
+  \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy
+  \let\tenttsl=\secttsl
+  \def\curfontsize{sec}%
+  \def\lsize{subsec}\def\lllsize{reduced}%
+  \resetmathfonts \setleading{17pt}}
+\def\subsecfonts{%
+  \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl
+  \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
+  \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy
+  \let\tenttsl=\ssecttsl
+  \def\curfontsize{ssec}%
+  \def\lsize{text}\def\lllsize{small}%
+  \resetmathfonts \setleading{15pt}}
+\let\subsubsecfonts = \subsecfonts
+\def\reducedfonts{%
+  \let\tenrm=\reducedrm \let\tenit=\reducedit \let\tensl=\reducedsl
+  \let\tenbf=\reducedbf \let\tentt=\reducedtt \let\reducedcaps=\reducedsc
+  \let\tensf=\reducedsf \let\teni=\reducedi \let\tensy=\reducedsy
+  \let\tenttsl=\reducedttsl
+  \def\curfontsize{reduced}%
+  \def\lsize{small}\def\lllsize{smaller}%
+  \resetmathfonts \setleading{10.5pt}}
+\def\smallfonts{%
+  \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl
+  \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc
+  \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy
+  \let\tenttsl=\smallttsl
+  \def\curfontsize{small}%
+  \def\lsize{smaller}\def\lllsize{smaller}%
+  \resetmathfonts \setleading{10.5pt}}
+\def\smallerfonts{%
+  \let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl
+  \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc
+  \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy
+  \let\tenttsl=\smallerttsl
+  \def\curfontsize{smaller}%
+  \def\lsize{smaller}\def\lllsize{smaller}%
+  \resetmathfonts \setleading{9.5pt}}
+
+% Fonts for short table of contents.
+\setfont\shortcontrm\rmshape{12}{1000}{OT1}
+\setfont\shortcontbf\bfshape{10}{\magstep1}{OT1}  % no cmb12
+\setfont\shortcontsl\slshape{12}{1000}{OT1}
+\setfont\shortconttt\ttshape{12}{1000}{OT1TT}
+
+% Define these just so they can be easily changed for other fonts.
+\def\angleleft{$\langle$}
+\def\angleright{$\rangle$}
+
+% Set the fonts to use with the @small... environments.
+\let\smallexamplefonts = \smallfonts
+
+% About \smallexamplefonts.  If we use \smallfonts (9pt), @smallexample
+% can fit this many characters:
+%   8.5x11=86   smallbook=72  a4=90  a5=69
+% If we use \scriptfonts (8pt), then we can fit this many characters:
+%   8.5x11=90+  smallbook=80  a4=90+  a5=77
+% For me, subjectively, the few extra characters that fit aren't worth
+% the additional smallness of 8pt.  So I'm making the default 9pt.
+%
+% By the way, for comparison, here's what fits with @example (10pt):
+%   8.5x11=71  smallbook=60  a4=75  a5=58
+% --karl, 24jan03.
+
+% Set up the default fonts, so we can use them for creating boxes.
+%
+\definetextfontsizexi
+
+
+\message{markup,}
+
+% Check if we are currently using a typewriter font.  Since all the
+% Computer Modern typewriter fonts have zero interword stretch (and
+% shrink), and it is reasonable to expect all typewriter fonts to have
+% this property, we can check that font parameter.
+%
+\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
+
+% Markup style infrastructure.  \defmarkupstylesetup\INITMACRO will
+% define and register \INITMACRO to be called on markup style changes.
+% \INITMACRO can check \currentmarkupstyle for the innermost
+% style and the set of \ifmarkupSTYLE switches for all styles
+% currently in effect.
+\newif\ifmarkupvar
+\newif\ifmarkupsamp
+\newif\ifmarkupkey
+%\newif\ifmarkupfile % @file == @samp.
+%\newif\ifmarkupoption % @option == @samp.
+\newif\ifmarkupcode
+\newif\ifmarkupkbd
+%\newif\ifmarkupenv % @env == @code.
+%\newif\ifmarkupcommand % @command == @code.
+\newif\ifmarkuptex % @tex (and part of @math, for now).
+\newif\ifmarkupexample
+\newif\ifmarkupverb
+\newif\ifmarkupverbatim
+
+\let\currentmarkupstyle\empty
+
+\def\setupmarkupstyle#1{%
+  \csname markup#1true\endcsname
+  \def\currentmarkupstyle{#1}%
+  \markupstylesetup
+}
+
+\let\markupstylesetup\empty
+
+\def\defmarkupstylesetup#1{%
+  \expandafter\def\expandafter\markupstylesetup
+    \expandafter{\markupstylesetup #1}%
+  \def#1%
+}
+
+% Markup style setup for left and right quotes.
+\defmarkupstylesetup\markupsetuplq{%
+  \expandafter\let\expandafter \temp
+    \csname markupsetuplq\currentmarkupstyle\endcsname
+  \ifx\temp\relax \markupsetuplqdefault \else \temp \fi
+}
+
+\defmarkupstylesetup\markupsetuprq{%
+  \expandafter\let\expandafter \temp
+    \csname markupsetuprq\currentmarkupstyle\endcsname
+  \ifx\temp\relax \markupsetuprqdefault \else \temp \fi
+}
+
+{
+\catcode`\'=\active
+\catcode`\`=\active
+
+\gdef\markupsetuplqdefault{\let`\lq}
+\gdef\markupsetuprqdefault{\let'\rq}
+
+\gdef\markupsetcodequoteleft{\let`\codequoteleft}
+\gdef\markupsetcodequoteright{\let'\codequoteright}
+}
+
+\let\markupsetuplqcode \markupsetcodequoteleft
+\let\markupsetuprqcode \markupsetcodequoteright
+%
+\let\markupsetuplqexample \markupsetcodequoteleft
+\let\markupsetuprqexample \markupsetcodequoteright
+%
+\let\markupsetuplqkbd     \markupsetcodequoteleft
+\let\markupsetuprqkbd     \markupsetcodequoteright
+%
+\let\markupsetuplqsamp \markupsetcodequoteleft
+\let\markupsetuprqsamp \markupsetcodequoteright
+%
+\let\markupsetuplqverb \markupsetcodequoteleft
+\let\markupsetuprqverb \markupsetcodequoteright
+%
+\let\markupsetuplqverbatim \markupsetcodequoteleft
+\let\markupsetuprqverbatim \markupsetcodequoteright
+
+% Allow an option to not use regular directed right quote/apostrophe
+% (char 0x27), but instead the undirected quote from cmtt (char 0x0d).
+% The undirected quote is ugly, so don't make it the default, but it
+% works for pasting with more pdf viewers (at least evince), the
+% lilypond developers report.  xpdf does work with the regular 0x27.
+%
+\def\codequoteright{%
+  \expandafter\ifx\csname SETtxicodequoteundirected\endcsname\relax
+    \expandafter\ifx\csname SETcodequoteundirected\endcsname\relax
+      '%
+    \else \char'15 \fi
+  \else \char'15 \fi
+}
+%
+% and a similar option for the left quote char vs. a grave accent.
+% Modern fonts display ASCII 0x60 as a grave accent, so some people like
+% the code environments to do likewise.
+%
+\def\codequoteleft{%
+  \expandafter\ifx\csname SETtxicodequotebacktick\endcsname\relax
+    \expandafter\ifx\csname SETcodequotebacktick\endcsname\relax
+      % [Knuth] pp. 380,381,391
+      % \relax disables Spanish ligatures ?` and !` of \tt font.
+      \relax`%
+    \else \char'22 \fi
+  \else \char'22 \fi
+}
+
+% Commands to set the quote options.
+% 
+\parseargdef\codequoteundirected{%
+  \def\temp{#1}%
+  \ifx\temp\onword
+    \expandafter\let\csname SETtxicodequoteundirected\endcsname
+      = t%
+  \else\ifx\temp\offword
+    \expandafter\let\csname SETtxicodequoteundirected\endcsname
+      = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @codequoteundirected value `\temp', must be on|off}%
+  \fi\fi
+}
+%
+\parseargdef\codequotebacktick{%
+  \def\temp{#1}%
+  \ifx\temp\onword
+    \expandafter\let\csname SETtxicodequotebacktick\endcsname
+      = t%
+  \else\ifx\temp\offword
+    \expandafter\let\csname SETtxicodequotebacktick\endcsname
+      = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @codequotebacktick value `\temp', must be on|off}%
+  \fi\fi
+}
+
+% [Knuth] pp. 380,381,391, disable Spanish ligatures ?` and !` of \tt font.
+\def\noligaturesquoteleft{\relax\lq}
+
+% Count depth in font-changes, for error checks
+\newcount\fontdepth \fontdepth=0
+
+% Font commands.
+
+% #1 is the font command (\sl or \it), #2 is the text to slant.
+% If we are in a monospaced environment, however, 1) always use \ttsl,
+% and 2) do not add an italic correction.
+\def\dosmartslant#1#2{%
+  \ifusingtt 
+    {{\ttsl #2}\let\next=\relax}%
+    {\def\next{{#1#2}\futurelet\next\smartitaliccorrection}}%
+  \next
+}
+\def\smartslanted{\dosmartslant\sl}
+\def\smartitalic{\dosmartslant\it}
+
+% Output an italic correction unless \next (presumed to be the following
+% character) is such as not to need one.
+\def\smartitaliccorrection{%
+  \ifx\next,%
+  \else\ifx\next-%
+  \else\ifx\next.%
+  \else\ifx\next\.%
+  \else\ifx\next\comma%
+  \else\ptexslash
+  \fi\fi\fi\fi\fi
+  \aftersmartic
+}
+
+% Unconditional use \ttsl, and no ic.  @var is set to this for defuns.
+\def\ttslanted#1{{\ttsl #1}}
+
+% @cite is like \smartslanted except unconditionally use \sl.  We never want
+% ttsl for book titles, do we?
+\def\cite#1{{\sl #1}\futurelet\next\smartitaliccorrection}
+
+\def\aftersmartic{}
+\def\var#1{%
+  \let\saveaftersmartic = \aftersmartic
+  \def\aftersmartic{\null\let\aftersmartic=\saveaftersmartic}%
+  \smartslanted{#1}%
+}
+
+\let\i=\smartitalic
+\let\slanted=\smartslanted
+\let\dfn=\smartslanted
+\let\emph=\smartitalic
+
+% Explicit font changes: @r, @sc, undocumented @ii.
+\def\r#1{{\rm #1}}              % roman font
+\def\sc#1{{\smallcaps#1}}       % smallcaps font
+\def\ii#1{{\it #1}}             % italic font
+
+% @b, explicit bold.  Also @strong.
+\def\b#1{{\bf #1}}
+\let\strong=\b
+
+% @sansserif, explicit sans.
+\def\sansserif#1{{\sf #1}}
+
+% We can't just use \exhyphenpenalty, because that only has effect at
+% the end of a paragraph.  Restore normal hyphenation at the end of the
+% group within which \nohyphenation is presumably called.
+%
+\def\nohyphenation{\hyphenchar\font = -1  \aftergroup\restorehyphenation}
+\def\restorehyphenation{\hyphenchar\font = `- }
+
+% Set sfcode to normal for the chars that usually have another value.
+% Can't use plain's \frenchspacing because it uses the `\x notation, and
+% sometimes \x has an active definition that messes things up.
+%
+\catcode`@=11
+  \def\plainfrenchspacing{%
+    \sfcode\dotChar  =\@m \sfcode\questChar=\@m \sfcode\exclamChar=\@m
+    \sfcode\colonChar=\@m \sfcode\semiChar =\@m \sfcode\commaChar =\@m
+    \def\endofsentencespacefactor{1000}% for @. and friends
+  }
+  \def\plainnonfrenchspacing{%
+    \sfcode`\.3000\sfcode`\?3000\sfcode`\!3000
+    \sfcode`\:2000\sfcode`\;1500\sfcode`\,1250
+    \def\endofsentencespacefactor{3000}% for @. and friends
+  }
+\catcode`@=\other
+\def\endofsentencespacefactor{3000}% default
+
+% @t, explicit typewriter.
+\def\t#1{%
+  {\tt \rawbackslash \plainfrenchspacing #1}%
+  \null
+}
+
+% @samp.
+\def\samp#1{{\setupmarkupstyle{samp}\lq\tclose{#1}\rq\null}}
+
+% @indicateurl is \samp, that is, with quotes.
+\let\indicateurl=\samp
+
+% @code (and similar) prints in typewriter, but with spaces the same
+% size as normal in the surrounding text, without hyphenation, etc.
+% This is a subroutine for that.
+\def\tclose#1{%
+  {%
+    % Change normal interword space to be same as for the current font.
+    \spaceskip = \fontdimen2\font
+    %
+    % Switch to typewriter.
+    \tt
+    %
+    % But `\ ' produces the large typewriter interword space.
+    \def\ {{\spaceskip = 0pt{} }}%
+    %
+    % Turn off hyphenation.
+    \nohyphenation
+    %
+    \rawbackslash
+    \plainfrenchspacing
+    #1%
+  }%
+  \null % reset spacefactor to 1000
+}
+
+% We *must* turn on hyphenation at `-' and `_' in @code.
+% (But see \codedashfinish below.)
+% Otherwise, it is too hard to avoid overfull hboxes
+% in the Emacs manual, the Library manual, etc.
+%
+% Unfortunately, TeX uses one parameter (\hyphenchar) to control
+% both hyphenation at - and hyphenation within words.
+% We must therefore turn them both off (\tclose does that)
+% and arrange explicitly to hyphenate at a dash. -- rms.
+{
+  \catcode`\-=\active \catcode`\_=\active
+  \catcode`\'=\active \catcode`\`=\active
+  \global\let'=\rq \global\let`=\lq  % default definitions
+  %
+  \global\def\code{\begingroup
+    \setupmarkupstyle{code}%
+    % The following should really be moved into \setupmarkupstyle handlers.
+    \catcode\dashChar=\active  \catcode\underChar=\active
+    \ifallowcodebreaks
+     \let-\codedash
+     \let_\codeunder
+    \else
+     \let-\normaldash
+     \let_\realunder
+    \fi
+    % Given -foo (with a single dash), we do not want to allow a break
+    % after the hyphen.
+    \global\let\codedashprev=\codedash
+    %
+    \codex
+  }
+  %
+  \gdef\codedash{\futurelet\next\codedashfinish}
+  \gdef\codedashfinish{%
+    \normaldash % always output the dash character itself.
+    % 
+    % Now, output a discretionary to allow a line break, unless
+    % (a) the next character is a -, or
+    % (b) the preceding character is a -.
+    % E.g., given --posix, we do not want to allow a break after either -.
+    % Given --foo-bar, we do want to allow a break between the - and the b.
+    \ifx\next\codedash \else
+      \ifx\codedashprev\codedash 
+      \else \discretionary{}{}{}\fi
+    \fi
+    % we need the space after the = for the case when \next itself is a
+    % space token; it would get swallowed otherwise.  As in @code{- a}.
+    \global\let\codedashprev= \next
+  }
+}
+\def\normaldash{-}
+%
+\def\codex #1{\tclose{#1}\endgroup}
+
+\def\codeunder{%
+  % this is all so @math{@code{var_name}+1} can work.  In math mode, _
+  % is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.)
+  % will therefore expand the active definition of _, which is us
+  % (inside @code that is), therefore an endless loop.
+  \ifusingtt{\ifmmode
+               \mathchar"075F % class 0=ordinary, family 7=ttfam, pos 0x5F=_.
+             \else\normalunderscore \fi
+             \discretionary{}{}{}}%
+            {\_}%
+}
+
+% An additional complication: the above will allow breaks after, e.g.,
+% each of the four underscores in __typeof__.  This is bad.
+% @allowcodebreaks provides a document-level way to turn breaking at -
+% and _ on and off.
+%
+\newif\ifallowcodebreaks  \allowcodebreakstrue
+
+\def\keywordtrue{true}
+\def\keywordfalse{false}
+
+\parseargdef\allowcodebreaks{%
+  \def\txiarg{#1}%
+  \ifx\txiarg\keywordtrue
+    \allowcodebreakstrue
+  \else\ifx\txiarg\keywordfalse
+    \allowcodebreaksfalse
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @allowcodebreaks option `\txiarg', must be true|false}%
+  \fi\fi
+}
+
+% For @command, @env, @file, @option quotes seem unnecessary,
+% so use \code rather than \samp.
+\let\command=\code
+\let\env=\code
+\let\file=\code
+\let\option=\code
+
+% @uref (abbreviation for `urlref') aka @url takes an optional
+% (comma-separated) second argument specifying the text to display and
+% an optional third arg as text to display instead of (rather than in
+% addition to) the url itself.  First (mandatory) arg is the url.
+
+% TeX-only option to allow changing PDF output to show only the second
+% arg (if given), and not the url (which is then just the link target).
+\newif\ifurefurlonlylink
+
+% The main macro is \urefbreak, which allows breaking at expected
+% places within the url.  (There used to be another version, which
+% didn't support automatic breaking.)
+\def\urefbreak{\begingroup \urefcatcodes \dourefbreak}
+\let\uref=\urefbreak
+%
+\def\dourefbreak#1{\urefbreakfinish #1,,,\finish}
+\def\urefbreakfinish#1,#2,#3,#4\finish{% doesn't work in @example
+  \unsepspaces
+  \pdfurl{#1}%
+  \setbox0 = \hbox{\ignorespaces #3}%
+  \ifdim\wd0 > 0pt
+    \unhbox0 % third arg given, show only that
+  \else
+    \setbox0 = \hbox{\ignorespaces #2}% look for second arg
+    \ifdim\wd0 > 0pt
+      \ifpdf
+        \ifurefurlonlylink
+          % PDF plus option to not display url, show just arg
+          \unhbox0             
+        \else
+          % PDF, normally display both arg and url for consistency,
+          % visibility, if the pdf is eventually used to print, etc.
+          \unhbox0\ (\urefcode{#1})%
+        \fi
+      \else
+        \unhbox0\ (\urefcode{#1})% DVI, always show arg and url
+      \fi
+    \else
+      \urefcode{#1}% only url given, so show it
+    \fi
+  \fi
+  \endlink
+\endgroup}
+
+% Allow line breaks around only a few characters (only).
+\def\urefcatcodes{%
+  \catcode\ampChar=\active   \catcode\dotChar=\active
+  \catcode\hashChar=\active  \catcode\questChar=\active
+  \catcode\slashChar=\active
+}
+{
+  \urefcatcodes
+  %
+  \global\def\urefcode{\begingroup
+    \setupmarkupstyle{code}%
+    \urefcatcodes
+    \let&\urefcodeamp
+    \let.\urefcodedot
+    \let#\urefcodehash
+    \let?\urefcodequest
+    \let/\urefcodeslash
+    \codex
+  }
+  %
+  % By default, they are just regular characters.
+  \global\def&{\normalamp}
+  \global\def.{\normaldot}
+  \global\def#{\normalhash}
+  \global\def?{\normalquest}
+  \global\def/{\normalslash}
+}
+
+% we put a little stretch before and after the breakable chars, to help
+% line breaking of long url's.  The unequal skips make look better in
+% cmtt at least, especially for dots.
+\def\urefprestretchamount{.13em}
+\def\urefpoststretchamount{.1em}
+\def\urefprestretch{\urefprebreak \hskip0pt plus\urefprestretchamount\relax}
+\def\urefpoststretch{\urefpostbreak \hskip0pt plus\urefprestretchamount\relax}
+%
+\def\urefcodeamp{\urefprestretch \&\urefpoststretch}
+\def\urefcodedot{\urefprestretch .\urefpoststretch}
+\def\urefcodehash{\urefprestretch \#\urefpoststretch}
+\def\urefcodequest{\urefprestretch ?\urefpoststretch}
+\def\urefcodeslash{\futurelet\next\urefcodeslashfinish}
+{
+  \catcode`\/=\active
+  \global\def\urefcodeslashfinish{%
+    \urefprestretch \slashChar
+    % Allow line break only after the final / in a sequence of
+    % slashes, to avoid line break between the slashes in http://.
+    \ifx\next/\else \urefpoststretch \fi
+  }
+}
+
+% One more complication: by default we'll break after the special
+% characters, but some people like to break before the special chars, so
+% allow that.  Also allow no breaking at all, for manual control.
+% 
+\parseargdef\urefbreakstyle{%
+  \def\txiarg{#1}%
+  \ifx\txiarg\wordnone
+    \def\urefprebreak{\nobreak}\def\urefpostbreak{\nobreak}
+  \else\ifx\txiarg\wordbefore
+    \def\urefprebreak{\allowbreak}\def\urefpostbreak{\nobreak}
+  \else\ifx\txiarg\wordafter
+    \def\urefprebreak{\nobreak}\def\urefpostbreak{\allowbreak}
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @urefbreakstyle setting `\txiarg'}%
+  \fi\fi\fi
+}
+\def\wordafter{after}
+\def\wordbefore{before}
+\def\wordnone{none}
+
+\urefbreakstyle after
+
+% @url synonym for @uref, since that's how everyone uses it.
+%
+\let\url=\uref
+
+% rms does not like angle brackets --karl, 17may97.
+% So now @email is just like @uref, unless we are pdf.
+%
+%\def\email#1{\angleleft{\tt #1}\angleright}
+\ifpdf
+  \def\email#1{\doemail#1,,\finish}
+  \def\doemail#1,#2,#3\finish{\begingroup
+    \unsepspaces
+    \pdfurl{mailto:#1}%
+    \setbox0 = \hbox{\ignorespaces #2}%
+    \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi
+    \endlink
+  \endgroup}
+\else
+  \let\email=\uref
+\fi
+
+% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
+%   `example' (@kbd uses ttsl only inside of @example and friends),
+%   or `code' (@kbd uses normal tty font always).
+\parseargdef\kbdinputstyle{%
+  \def\txiarg{#1}%
+  \ifx\txiarg\worddistinct
+    \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
+  \else\ifx\txiarg\wordexample
+    \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
+  \else\ifx\txiarg\wordcode
+    \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @kbdinputstyle setting `\txiarg'}%
+  \fi\fi\fi
+}
+\def\worddistinct{distinct}
+\def\wordexample{example}
+\def\wordcode{code}
+
+% Default is `distinct'.
+\kbdinputstyle distinct
+
+% @kbd is like @code, except that if the argument is just one @key command,
+% then @kbd has no effect.
+\def\kbd#1{{\def\look{#1}\expandafter\kbdsub\look??\par}}
+
+\def\xkey{\key}
+\def\kbdsub#1#2#3\par{%
+  \def\one{#1}\def\three{#3}\def\threex{??}%
+  \ifx\one\xkey\ifx\threex\three \key{#2}%
+  \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
+  \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
+}
+
+% definition of @key that produces a lozenge.  Doesn't adjust to text size.
+%\setfont\keyrm\rmshape{8}{1000}{OT1}
+%\font\keysy=cmsy9
+%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
+%  \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
+%    \vbox{\hrule\kern-0.4pt
+%     \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
+%    \kern-0.4pt\hrule}%
+%  \kern-.06em\raise0.4pt\hbox{\angleright}}}}
+
+% definition of @key with no lozenge.  If the current font is already
+% monospace, don't change it; that way, we respect @kbdinputstyle.  But
+% if it isn't monospace, then use \tt.
+%
+\def\key#1{{\setupmarkupstyle{key}%
+  \nohyphenation
+  \ifmonospace\else\tt\fi
+  #1}\null}
+
+% @clicksequence{File @click{} Open ...}
+\def\clicksequence#1{\begingroup #1\endgroup}
+
+% @clickstyle @arrow   (by default)
+\parseargdef\clickstyle{\def\click{#1}}
+\def\click{\arrow}
+
+% Typeset a dimension, e.g., `in' or `pt'.  The only reason for the
+% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt.
+%
+\def\dmn#1{\thinspace #1}
+
+% @acronym for "FBI", "NATO", and the like.
+% We print this one point size smaller, since it's intended for
+% all-uppercase.
+%
+\def\acronym#1{\doacronym #1,,\finish}
+\def\doacronym#1,#2,#3\finish{%
+  {\selectfonts\lsize #1}%
+  \def\temp{#2}%
+  \ifx\temp\empty \else
+    \space ({\unsepspaces \ignorespaces \temp \unskip})%
+  \fi
+  \null % reset \spacefactor=1000
+}
+
+% @abbr for "Comput. J." and the like.
+% No font change, but don't do end-of-sentence spacing.
+%
+\def\abbr#1{\doabbr #1,,\finish}
+\def\doabbr#1,#2,#3\finish{%
+  {\plainfrenchspacing #1}%
+  \def\temp{#2}%
+  \ifx\temp\empty \else
+    \space ({\unsepspaces \ignorespaces \temp \unskip})%
+  \fi
+  \null % reset \spacefactor=1000
+}
+
+% @asis just yields its argument.  Used with @table, for example.
+%
+\def\asis#1{#1}
+
+% @math outputs its argument in math mode.
+%
+% One complication: _ usually means subscripts, but it could also mean
+% an actual _ character, as in @math{@var{some_variable} + 1}.  So make
+% _ active, and distinguish by seeing if the current family is \slfam,
+% which is what @var uses.
+{
+  \catcode`\_ = \active
+  \gdef\mathunderscore{%
+    \catcode`\_=\active
+    \def_{\ifnum\fam=\slfam \_\else\sb\fi}%
+  }
+}
+% Another complication: we want \\ (and @\) to output a math (or tt) \.
+% FYI, plain.tex uses \\ as a temporary control sequence (for no
+% particular reason), but this is not advertised and we don't care.
+%
+% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\.
+\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi}
+%
+\def\math{%
+  \tex
+  \mathunderscore
+  \let\\ = \mathbackslash
+  \mathactive
+  % make the texinfo accent commands work in math mode
+  \let\"=\ddot
+  \let\'=\acute
+  \let\==\bar
+  \let\^=\hat
+  \let\`=\grave
+  \let\u=\breve
+  \let\v=\check
+  \let\~=\tilde
+  \let\dotaccent=\dot
+  % have to provide another name for sup operator
+  \let\mathopsup=\sup
+  $\finishmath
+}
+\def\finishmath#1{#1$\endgroup}  % Close the group opened by \tex.
+
+% Some active characters (such as <) are spaced differently in math.
+% We have to reset their definitions in case the @math was an argument
+% to a command which sets the catcodes (such as @item or @section).
+%
+{
+  \catcode`^ = \active
+  \catcode`< = \active
+  \catcode`> = \active
+  \catcode`+ = \active
+  \catcode`' = \active
+  \gdef\mathactive{%
+    \let^ = \ptexhat
+    \let< = \ptexless
+    \let> = \ptexgtr
+    \let+ = \ptexplus
+    \let' = \ptexquoteright
+  }
+}
+
+% for @sub and @sup, if in math mode, just do a normal sub/superscript.
+% If in text, use math to place as sub/superscript, but switch
+% into text mode, with smaller fonts.  This is a different font than the
+% one used for real math sub/superscripts (8pt vs. 7pt), but let's not
+% fix it (significant additions to font machinery) until someone notices.
+%
+\def\sub{\ifmmode \expandafter\sb \else \expandafter\finishsub\fi}
+\def\finishsub#1{$\sb{\hbox{\selectfonts\lllsize #1}}$}%
+%
+\def\sup{\ifmmode \expandafter\ptexsp \else \expandafter\finishsup\fi}
+\def\finishsup#1{$\ptexsp{\hbox{\selectfonts\lllsize #1}}$}%
+
+% @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}.
+% Ignore unless FMTNAME == tex; then it is like @iftex and @tex,
+% except specified as a normal braced arg, so no newlines to worry about.
+% 
+\def\outfmtnametex{tex}
+%
+\long\def\inlinefmt#1{\doinlinefmt #1,\finish}
+\long\def\doinlinefmt#1,#2,\finish{%
+  \def\inlinefmtname{#1}%
+  \ifx\inlinefmtname\outfmtnametex \ignorespaces #2\fi
+}
+% 
+% @inlinefmtifelse{FMTNAME,THEN-TEXT,ELSE-TEXT} expands THEN-TEXT if
+% FMTNAME is tex, else ELSE-TEXT.
+\long\def\inlinefmtifelse#1{\doinlinefmtifelse #1,,,\finish}
+\long\def\doinlinefmtifelse#1,#2,#3,#4,\finish{%
+  \def\inlinefmtname{#1}%
+  \ifx\inlinefmtname\outfmtnametex \ignorespaces #2\else \ignorespaces #3\fi
+}
+%
+% For raw, must switch into @tex before parsing the argument, to avoid
+% setting catcodes prematurely.  Doing it this way means that, for
+% example, @inlineraw{html, foo{bar} gets a parse error instead of being
+% ignored.  But this isn't important because if people want a literal
+% *right* brace they would have to use a command anyway, so they may as
+% well use a command to get a left brace too.  We could re-use the
+% delimiter character idea from \verb, but it seems like overkill.
+% 
+\long\def\inlineraw{\tex \doinlineraw}
+\long\def\doinlineraw#1{\doinlinerawtwo #1,\finish}
+\def\doinlinerawtwo#1,#2,\finish{%
+  \def\inlinerawname{#1}%
+  \ifx\inlinerawname\outfmtnametex \ignorespaces #2\fi
+  \endgroup % close group opened by \tex.
+}
+
+% @inlineifset{VAR, TEXT} expands TEXT if VAR is @set.
+%
+\long\def\inlineifset#1{\doinlineifset #1,\finish}
+\long\def\doinlineifset#1,#2,\finish{%
+  \def\inlinevarname{#1}%
+  \expandafter\ifx\csname SET\inlinevarname\endcsname\relax
+  \else\ignorespaces#2\fi
+}
+
+% @inlineifclear{VAR, TEXT} expands TEXT if VAR is not @set.
+%
+\long\def\inlineifclear#1{\doinlineifclear #1,\finish}
+\long\def\doinlineifclear#1,#2,\finish{%
+  \def\inlinevarname{#1}%
+  \expandafter\ifx\csname SET\inlinevarname\endcsname\relax \ignorespaces#2\fi
+}
+
+
+\message{glyphs,}
+% and logos.
+
+% @@ prints an @, as does @atchar{}.
+\def\@{\char64 }
+\let\atchar=\@
+
+% @{ @} @lbracechar{} @rbracechar{} all generate brace characters.
+% Unless we're in typewriter, use \ecfont because the CM text fonts do
+% not have braces, and we don't want to switch into math.
+\def\mylbrace{{\ifmonospace\else\ecfont\fi \char123}}
+\def\myrbrace{{\ifmonospace\else\ecfont\fi \char125}}
+\let\{=\mylbrace \let\lbracechar=\{
+\let\}=\myrbrace \let\rbracechar=\}
+\begingroup
+  % Definitions to produce \{ and \} commands for indices,
+  % and @{ and @} for the aux/toc files.
+  \catcode`\{ = \other \catcode`\} = \other
+  \catcode`\[ = 1 \catcode`\] = 2
+  \catcode`\! = 0 \catcode`\\ = \other
+  !gdef!lbracecmd[\{]%
+  !gdef!rbracecmd[\}]%
+  !gdef!lbraceatcmd[@{]%
+  !gdef!rbraceatcmd[@}]%
+!endgroup
+
+% @comma{} to avoid , parsing problems.
+\let\comma = ,
+
+% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
+% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H.
+\let\, = \ptexc
+\let\dotaccent = \ptexdot
+\def\ringaccent#1{{\accent23 #1}}
+\let\tieaccent = \ptext
+\let\ubaraccent = \ptexb
+\let\udotaccent = \d
+
+% Other special characters: @questiondown @exclamdown @ordf @ordm
+% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss.
+\def\questiondown{?`}
+\def\exclamdown{!`}
+\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}}
+\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}}
+
+% Dotless i and dotless j, used for accents.
+\def\imacro{i}
+\def\jmacro{j}
+\def\dotless#1{%
+  \def\temp{#1}%
+  \ifx\temp\imacro \ifmmode\imath \else\ptexi \fi
+  \else\ifx\temp\jmacro \ifmmode\jmath \else\j \fi
+  \else \errmessage{@dotless can be used only with i or j}%
+  \fi\fi
+}
+
+% The \TeX{} logo, as in plain, but resetting the spacing so that a
+% period following counts as ending a sentence.  (Idea found in latex.)
+%
+\edef\TeX{\TeX \spacefactor=1000 }
+
+% @LaTeX{} logo.  Not quite the same results as the definition in
+% latex.ltx, since we use a different font for the raised A; it's most
+% convenient for us to use an explicitly smaller font, rather than using
+% the \scriptstyle font (since we don't reset \scriptstyle and
+% \scriptscriptstyle).
+%
+\def\LaTeX{%
+  L\kern-.36em
+  {\setbox0=\hbox{T}%
+   \vbox to \ht0{\hbox{%
+     \ifx\textnominalsize\xwordpt
+       % for 10pt running text, \lllsize (8pt) is too small for the A in LaTeX.
+       % Revert to plain's \scriptsize, which is 7pt.
+       \count255=\the\fam $\fam\count255 \scriptstyle A$%
+     \else
+       % For 11pt, we can use our lllsize.
+       \selectfonts\lllsize A%
+     \fi
+     }%
+     \vss
+  }}%
+  \kern-.15em
+  \TeX
+}
+
+% Some math mode symbols.  Define \ensuremath to switch into math mode
+% unless we are already there.  Expansion tricks may not be needed here,
+% but safer, and can't hurt.
+\def\ensuremath{\ifmmode \expandafter\asis \else\expandafter\ensuredmath \fi}
+\def\ensuredmath#1{$\relax#1$}
+%
+\def\bullet{\ensuremath\ptexbullet}
+\def\geq{\ensuremath\ge}
+\def\leq{\ensuremath\le}
+\def\minus{\ensuremath-}
+
+% @dots{} outputs an ellipsis using the current font.
+% We do .5em per period so that it has the same spacing in the cm
+% typewriter fonts as three actual period characters; on the other hand,
+% in other typewriter fonts three periods are wider than 1.5em.  So do
+% whichever is larger.
+%
+\def\dots{%
+  \leavevmode
+  \setbox0=\hbox{...}% get width of three periods
+  \ifdim\wd0 > 1.5em
+    \dimen0 = \wd0
+  \else
+    \dimen0 = 1.5em
+  \fi
+  \hbox to \dimen0{%
+    \hskip 0pt plus.25fil
+    .\hskip 0pt plus1fil
+    .\hskip 0pt plus1fil
+    .\hskip 0pt plus.5fil
+  }%
+}
+
+% @enddots{} is an end-of-sentence ellipsis.
+%
+\def\enddots{%
+  \dots
+  \spacefactor=\endofsentencespacefactor
+}
+
+% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
+%
+% Since these characters are used in examples, they should be an even number of
+% \tt widths. Each \tt character is 1en, so two makes it 1em.
+%
+\def\point{$\star$}
+\def\arrow{\leavevmode\raise.05ex\hbox to 1em{\hfil$\rightarrow$\hfil}}
+\def\result{\leavevmode\raise.05ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
+\def\expansion{\leavevmode\hbox to 1em{\hfil$\mapsto$\hfil}}
+\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
+\def\equiv{\leavevmode\hbox to 1em{\hfil$\ptexequiv$\hfil}}
+
+% The @error{} command.
+% Adapted from the TeXbook's \boxit.
+%
+\newbox\errorbox
+%
+{\tentt \global\dimen0 = 3em}% Width of the box.
+\dimen2 = .55pt % Thickness of rules
+% The text. (`r' is open on the right, `e' somewhat less so on the left.)
+\setbox0 = \hbox{\kern-.75pt \reducedsf \putworderror\kern-1.5pt}
+%
+\setbox\errorbox=\hbox to \dimen0{\hfil
+   \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
+   \advance\hsize by -2\dimen2 % Rules.
+   \vbox{%
+      \hrule height\dimen2
+      \hbox{\vrule width\dimen2 \kern3pt          % Space to left of text.
+         \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
+         \kern3pt\vrule width\dimen2}% Space to right.
+      \hrule height\dimen2}
+    \hfil}
+%
+\def\error{\leavevmode\lower.7ex\copy\errorbox}
+
+% @pounds{} is a sterling sign, which Knuth put in the CM italic font.
+%
+\def\pounds{{\it\$}}
+
+% @euro{} comes from a separate font, depending on the current style.
+% We use the free feym* fonts from the eurosym package by Henrik
+% Theiling, which support regular, slanted, bold and bold slanted (and
+% "outlined" (blackboard board, sort of) versions, which we don't need).
+% It is available from http://www.ctan.org/tex-archive/fonts/eurosym.
+%
+% Although only regular is the truly official Euro symbol, we ignore
+% that.  The Euro is designed to be slightly taller than the regular
+% font height.
+%
+% feymr - regular
+% feymo - slanted
+% feybr - bold
+% feybo - bold slanted
+%
+% There is no good (free) typewriter version, to my knowledge.
+% A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide.
+% Hmm.
+%
+% Also doesn't work in math.  Do we need to do math with euro symbols?
+% Hope not.
+%
+%
+\def\euro{{\eurofont e}}
+\def\eurofont{%
+  % We set the font at each command, rather than predefining it in
+  % \textfonts and the other font-switching commands, so that
+  % installations which never need the symbol don't have to have the
+  % font installed.
+  %
+  % There is only one designed size (nominal 10pt), so we always scale
+  % that to the current nominal size.
+  %
+  % By the way, simply using "at 1em" works for cmr10 and the like, but
+  % does not work for cmbx10 and other extended/shrunken fonts.
+  %
+  \def\eurosize{\csname\curfontsize nominalsize\endcsname}%
+  %
+  \ifx\curfontstyle\bfstylename
+    % bold:
+    \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize
+  \else
+    % regular:
+    \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize
+  \fi
+  \thiseurofont
+}
+
+% Glyphs from the EC fonts.  We don't use \let for the aliases, because
+% sometimes we redefine the original macro, and the alias should reflect
+% the redefinition.
+%
+% Use LaTeX names for the Icelandic letters.
+\def\DH{{\ecfont \char"D0}} % Eth
+\def\dh{{\ecfont \char"F0}} % eth
+\def\TH{{\ecfont \char"DE}} % Thorn
+\def\th{{\ecfont \char"FE}} % thorn
+%
+\def\guillemetleft{{\ecfont \char"13}}
+\def\guillemotleft{\guillemetleft}
+\def\guillemetright{{\ecfont \char"14}}
+\def\guillemotright{\guillemetright}
+\def\guilsinglleft{{\ecfont \char"0E}}
+\def\guilsinglright{{\ecfont \char"0F}}
+\def\quotedblbase{{\ecfont \char"12}}
+\def\quotesinglbase{{\ecfont \char"0D}}
+%
+% This positioning is not perfect (see the ogonek LaTeX package), but
+% we have the precomposed glyphs for the most common cases.  We put the
+% tests to use those glyphs in the single \ogonek macro so we have fewer
+% dummy definitions to worry about for index entries, etc.
+%
+% ogonek is also used with other letters in Lithuanian (IOU), but using
+% the precomposed glyphs for those is not so easy since they aren't in
+% the same EC font.
+\def\ogonek#1{{%
+  \def\temp{#1}%
+  \ifx\temp\macrocharA\Aogonek
+  \else\ifx\temp\macrochara\aogonek
+  \else\ifx\temp\macrocharE\Eogonek
+  \else\ifx\temp\macrochare\eogonek
+  \else
+    \ecfont \setbox0=\hbox{#1}%
+    \ifdim\ht0=1ex\accent"0C #1%
+    \else\ooalign{\unhbox0\crcr\hidewidth\char"0C \hidewidth}%
+    \fi
+  \fi\fi\fi\fi
+  }%
+}
+\def\Aogonek{{\ecfont \char"81}}\def\macrocharA{A}
+\def\aogonek{{\ecfont \char"A1}}\def\macrochara{a}
+\def\Eogonek{{\ecfont \char"86}}\def\macrocharE{E}
+\def\eogonek{{\ecfont \char"A6}}\def\macrochare{e}
+%
+% Use the European Computer Modern fonts (cm-super in outline format)
+% for non-CM glyphs.  That is ec* for regular text and tc* for the text
+% companion symbols (LaTeX TS1 encoding).  Both are part of the ec
+% package and follow the same conventions.
+% 
+\def\ecfont{\etcfont{e}}
+\def\tcfont{\etcfont{t}}
+%
+\def\etcfont#1{%
+  % We can't distinguish serif/sans and italic/slanted, but this
+  % is used for crude hacks anyway (like adding French and German
+  % quotes to documents typeset with CM, where we lose kerning), so
+  % hopefully nobody will notice/care.
+  \edef\ecsize{\csname\curfontsize ecsize\endcsname}%
+  \edef\nominalsize{\csname\curfontsize nominalsize\endcsname}%
+  \ifmonospace
+    % typewriter:
+    \font\thisecfont = #1ctt\ecsize \space at \nominalsize
+  \else
+    \ifx\curfontstyle\bfstylename
+      % bold:
+      \font\thisecfont = #1cb\ifusingit{i}{x}\ecsize \space at \nominalsize
+    \else
+      % regular:
+      \font\thisecfont = #1c\ifusingit{ti}{rm}\ecsize \space at \nominalsize
+    \fi
+  \fi
+  \thisecfont
+}
+
+% @registeredsymbol - R in a circle.  The font for the R should really
+% be smaller yet, but lllsize is the best we can do for now.
+% Adapted from the plain.tex definition of \copyright.
+%
+\def\registeredsymbol{%
+  $^{{\ooalign{\hfil\raise.07ex\hbox{\selectfonts\lllsize R}%
+               \hfil\crcr\Orb}}%
+    }$%
+}
+
+% @textdegree - the normal degrees sign.
+%
+\def\textdegree{$^\circ$}
+
+% Laurent Siebenmann reports \Orb undefined with:
+%  Textures 1.7.7 (preloaded format=plain 93.10.14)  (68K)  16 APR 2004 02:38
+% so we'll define it if necessary.
+%
+\ifx\Orb\thisisundefined
+\def\Orb{\mathhexbox20D}
+\fi
+
+% Quotes.
+\chardef\quotedblleft="5C
+\chardef\quotedblright=`\"
+\chardef\quoteleft=`\`
+\chardef\quoteright=`\'
+
+
+\message{page headings,}
+
+\newskip\titlepagetopglue \titlepagetopglue = 1.5in
+\newskip\titlepagebottomglue \titlepagebottomglue = 2pc
+
+% First the title page.  Must do @settitle before @titlepage.
+\newif\ifseenauthor
+\newif\iffinishedtitlepage
+
+% Do an implicit @contents or @shortcontents after @end titlepage if the
+% user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage.
+%
+\newif\ifsetcontentsaftertitlepage
+ \let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue
+\newif\ifsetshortcontentsaftertitlepage
+ \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue
+
+\parseargdef\shorttitlepage{%
+  \begingroup \hbox{}\vskip 1.5in \chaprm \centerline{#1}%
+  \endgroup\page\hbox{}\page}
+
+\envdef\titlepage{%
+  % Open one extra group, as we want to close it in the middle of \Etitlepage.
+  \begingroup
+    \parindent=0pt \textfonts
+    % Leave some space at the very top of the page.
+    \vglue\titlepagetopglue
+    % No rule at page bottom unless we print one at the top with @title.
+    \finishedtitlepagetrue
+    %
+    % Most title ``pages'' are actually two pages long, with space
+    % at the top of the second.  We don't want the ragged left on the second.
+    \let\oldpage = \page
+    \def\page{%
+      \iffinishedtitlepage\else
+	 \finishtitlepage
+      \fi
+      \let\page = \oldpage
+      \page
+      \null
+    }%
+}
+
+\def\Etitlepage{%
+    \iffinishedtitlepage\else
+	\finishtitlepage
+    \fi
+    % It is important to do the page break before ending the group,
+    % because the headline and footline are only empty inside the group.
+    % If we use the new definition of \page, we always get a blank page
+    % after the title page, which we certainly don't want.
+    \oldpage
+  \endgroup
+  %
+  % Need this before the \...aftertitlepage checks so that if they are
+  % in effect the toc pages will come out with page numbers.
+  \HEADINGSon
+  %
+  % If they want short, they certainly want long too.
+  \ifsetshortcontentsaftertitlepage
+    \shortcontents
+    \contents
+    \global\let\shortcontents = \relax
+    \global\let\contents = \relax
+  \fi
+  %
+  \ifsetcontentsaftertitlepage
+    \contents
+    \global\let\contents = \relax
+    \global\let\shortcontents = \relax
+  \fi
+}
+
+\def\finishtitlepage{%
+  \vskip4pt \hrule height 2pt width \hsize
+  \vskip\titlepagebottomglue
+  \finishedtitlepagetrue
+}
+
+% Settings used for typesetting titles: no hyphenation, no indentation,
+% don't worry much about spacing, ragged right.  This should be used
+% inside a \vbox, and fonts need to be set appropriately first.  Because
+% it is always used for titles, nothing else, we call \rmisbold.  \par
+% should be specified before the end of the \vbox, since a vbox is a group.
+% 
+\def\raggedtitlesettings{%
+  \rmisbold
+  \hyphenpenalty=10000
+  \parindent=0pt
+  \tolerance=5000
+  \ptexraggedright
+}
+
+% Macros to be used within @titlepage:
+
+\let\subtitlerm=\tenrm
+\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}
+
+\parseargdef\title{%
+  \checkenv\titlepage
+  \vbox{\titlefonts \raggedtitlesettings #1\par}%
+  % print a rule at the page bottom also.
+  \finishedtitlepagefalse
+  \vskip4pt \hrule height 4pt width \hsize \vskip4pt
+}
+
+\parseargdef\subtitle{%
+  \checkenv\titlepage
+  {\subtitlefont \rightline{#1}}%
+}
+
+% @author should come last, but may come many times.
+% It can also be used inside @quotation.
+%
+\parseargdef\author{%
+  \def\temp{\quotation}%
+  \ifx\thisenv\temp
+    \def\quotationauthor{#1}% printed in \Equotation.
+  \else
+    \checkenv\titlepage
+    \ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi
+    {\secfonts\rmisbold \leftline{#1}}%
+  \fi
+}
+
+
+% Set up page headings and footings.
+
+\let\thispage=\folio
+
+\newtoks\evenheadline    % headline on even pages
+\newtoks\oddheadline     % headline on odd pages
+\newtoks\evenfootline    % footline on even pages
+\newtoks\oddfootline     % footline on odd pages
+
+% Now make \makeheadline and \makefootline in Plain TeX use those variables
+\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
+                            \else \the\evenheadline \fi}}
+\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline
+                            \else \the\evenfootline \fi}\HEADINGShook}
+\let\HEADINGShook=\relax
+
+% Commands to set those variables.
+% For example, this is what  @headings on  does
+% @evenheading @thistitle|@thispage|@thischapter
+% @oddheading @thischapter|@thispage|@thistitle
+% @evenfooting @thisfile||
+% @oddfooting ||@thisfile
+
+
+\def\evenheading{\parsearg\evenheadingxxx}
+\def\evenheadingxxx #1{\evenheadingyyy #1\|\|\|\|\finish}
+\def\evenheadingyyy #1\|#2\|#3\|#4\finish{%
+\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+
+\def\oddheading{\parsearg\oddheadingxxx}
+\def\oddheadingxxx #1{\oddheadingyyy #1\|\|\|\|\finish}
+\def\oddheadingyyy #1\|#2\|#3\|#4\finish{%
+\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+
+\parseargdef\everyheading{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
+
+\def\evenfooting{\parsearg\evenfootingxxx}
+\def\evenfootingxxx #1{\evenfootingyyy #1\|\|\|\|\finish}
+\def\evenfootingyyy #1\|#2\|#3\|#4\finish{%
+\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+
+\def\oddfooting{\parsearg\oddfootingxxx}
+\def\oddfootingxxx #1{\oddfootingyyy #1\|\|\|\|\finish}
+\def\oddfootingyyy #1\|#2\|#3\|#4\finish{%
+  \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
+  %
+  % Leave some space for the footline.  Hopefully ok to assume
+  % @evenfooting will not be used by itself.
+  \global\advance\pageheight by -12pt
+  \global\advance\vsize by -12pt
+}
+
+\parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}}
+
+% @evenheadingmarks top     \thischapter <- chapter at the top of a page
+% @evenheadingmarks bottom  \thischapter <- chapter at the bottom of a page
+%
+% The same set of arguments for:
+%
+% @oddheadingmarks
+% @evenfootingmarks
+% @oddfootingmarks
+% @everyheadingmarks
+% @everyfootingmarks
+
+% These define \getoddheadingmarks, \getevenheadingmarks,
+% \getoddfootingmarks, and \getevenfootingmarks, each to one of
+% \gettopheadingmarks, \getbottomheadingmarks.
+%
+\def\evenheadingmarks{\headingmarks{even}{heading}}
+\def\oddheadingmarks{\headingmarks{odd}{heading}}
+\def\evenfootingmarks{\headingmarks{even}{footing}}
+\def\oddfootingmarks{\headingmarks{odd}{footing}}
+\def\everyheadingmarks#1 {\headingmarks{even}{heading}{#1}
+                          \headingmarks{odd}{heading}{#1} }
+\def\everyfootingmarks#1 {\headingmarks{even}{footing}{#1}
+                          \headingmarks{odd}{footing}{#1} }
+% #1 = even/odd, #2 = heading/footing, #3 = top/bottom.
+\def\headingmarks#1#2#3 {%
+  \expandafter\let\expandafter\temp \csname get#3headingmarks\endcsname
+  \global\expandafter\let\csname get#1#2marks\endcsname \temp
+}
+
+\everyheadingmarks bottom
+\everyfootingmarks bottom
+
+% @headings double      turns headings on for double-sided printing.
+% @headings single      turns headings on for single-sided printing.
+% @headings off         turns them off.
+% @headings on          same as @headings double, retained for compatibility.
+% @headings after       turns on double-sided headings after this page.
+% @headings doubleafter turns on double-sided headings after this page.
+% @headings singleafter turns on single-sided headings after this page.
+% By default, they are off at the start of a document,
+% and turned `on' after @end titlepage.
+
+\def\headings #1 {\csname HEADINGS#1\endcsname}
+
+\def\headingsoff{% non-global headings elimination
+  \evenheadline={\hfil}\evenfootline={\hfil}%
+   \oddheadline={\hfil}\oddfootline={\hfil}%
+}
+
+\def\HEADINGSoff{{\globaldefs=1 \headingsoff}} % global setting
+\HEADINGSoff  % it's the default
+
+% When we turn headings on, set the page number to 1.
+% For double-sided printing, put current file name in lower left corner,
+% chapter name on inside top of right hand pages, document
+% title on inside top of left hand pages, and page numbers on outside top
+% edge of all pages.
+\def\HEADINGSdouble{%
+\global\pageno=1
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\folio\hfil\thistitle}}
+\global\oddheadline={\line{\thischapterheading\hfil\folio}}
+\global\let\contentsalignmacro = \chapoddpage
+}
+\let\contentsalignmacro = \chappager
+
+% For single-sided printing, chapter title goes across top left of page,
+% page number on top right.
+\def\HEADINGSsingle{%
+\global\pageno=1
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\thischapterheading\hfil\folio}}
+\global\oddheadline={\line{\thischapterheading\hfil\folio}}
+\global\let\contentsalignmacro = \chappager
+}
+\def\HEADINGSon{\HEADINGSdouble}
+
+\def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex}
+\let\HEADINGSdoubleafter=\HEADINGSafter
+\def\HEADINGSdoublex{%
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\folio\hfil\thistitle}}
+\global\oddheadline={\line{\thischapterheading\hfil\folio}}
+\global\let\contentsalignmacro = \chapoddpage
+}
+
+\def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex}
+\def\HEADINGSsinglex{%
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\thischapterheading\hfil\folio}}
+\global\oddheadline={\line{\thischapterheading\hfil\folio}}
+\global\let\contentsalignmacro = \chappager
+}
+
+% Subroutines used in generating headings
+% This produces Day Month Year style of output.
+% Only define if not already defined, in case a txi-??.tex file has set
+% up a different format (e.g., txi-cs.tex does this).
+\ifx\today\thisisundefined
+\def\today{%
+  \number\day\space
+  \ifcase\month
+  \or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr
+  \or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug
+  \or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec
+  \fi
+  \space\number\year}
+\fi
+
+% @settitle line...  specifies the title of the document, for headings.
+% It generates no output of its own.
+\def\thistitle{\putwordNoTitle}
+\def\settitle{\parsearg{\gdef\thistitle}}
+
+
+\message{tables,}
+% Tables -- @table, @ftable, @vtable, @item(x).
+
+% default indentation of table text
+\newdimen\tableindent \tableindent=.8in
+% default indentation of @itemize and @enumerate text
+\newdimen\itemindent  \itemindent=.3in
+% margin between end of table item and start of table text.
+\newdimen\itemmargin  \itemmargin=.1in
+
+% used internally for \itemindent minus \itemmargin
+\newdimen\itemmax
+
+% Note @table, @ftable, and @vtable define @item, @itemx, etc., with
+% these defs.
+% They also define \itemindex
+% to index the item name in whatever manner is desired (perhaps none).
+
+\newif\ifitemxneedsnegativevskip
+
+\def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi}
+
+\def\internalBitem{\smallbreak \parsearg\itemzzz}
+\def\internalBitemx{\itemxpar \parsearg\itemzzz}
+
+\def\itemzzz #1{\begingroup %
+  \advance\hsize by -\rightskip
+  \advance\hsize by -\tableindent
+  \setbox0=\hbox{\itemindicate{#1}}%
+  \itemindex{#1}%
+  \nobreak % This prevents a break before @itemx.
+  %
+  % If the item text does not fit in the space we have, put it on a line
+  % by itself, and do not allow a page break either before or after that
+  % line.  We do not start a paragraph here because then if the next
+  % command is, e.g., @kindex, the whatsit would get put into the
+  % horizontal list on a line by itself, resulting in extra blank space.
+  \ifdim \wd0>\itemmax
+    %
+    % Make this a paragraph so we get the \parskip glue and wrapping,
+    % but leave it ragged-right.
+    \begingroup
+      \advance\leftskip by-\tableindent
+      \advance\hsize by\tableindent
+      \advance\rightskip by0pt plus1fil\relax
+      \leavevmode\unhbox0\par
+    \endgroup
+    %
+    % We're going to be starting a paragraph, but we don't want the
+    % \parskip glue -- logically it's part of the @item we just started.
+    \nobreak \vskip-\parskip
+    %
+    % Stop a page break at the \parskip glue coming up.  However, if
+    % what follows is an environment such as @example, there will be no
+    % \parskip glue; then the negative vskip we just inserted would
+    % cause the example and the item to crash together.  So we use this
+    % bizarre value of 10001 as a signal to \aboveenvbreak to insert
+    % \parskip glue after all.  Section titles are handled this way also.
+    %
+    \penalty 10001
+    \endgroup
+    \itemxneedsnegativevskipfalse
+  \else
+    % The item text fits into the space.  Start a paragraph, so that the
+    % following text (if any) will end up on the same line.
+    \noindent
+    % Do this with kerns and \unhbox so that if there is a footnote in
+    % the item text, it can migrate to the main vertical list and
+    % eventually be printed.
+    \nobreak\kern-\tableindent
+    \dimen0 = \itemmax  \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0
+    \unhbox0
+    \nobreak\kern\dimen0
+    \endgroup
+    \itemxneedsnegativevskiptrue
+  \fi
+}
+
+\def\item{\errmessage{@item while not in a list environment}}
+\def\itemx{\errmessage{@itemx while not in a list environment}}
+
+% @table, @ftable, @vtable.
+\envdef\table{%
+  \let\itemindex\gobble
+  \tablecheck{table}%
+}
+\envdef\ftable{%
+  \def\itemindex ##1{\doind {fn}{\code{##1}}}%
+  \tablecheck{ftable}%
+}
+\envdef\vtable{%
+  \def\itemindex ##1{\doind {vr}{\code{##1}}}%
+  \tablecheck{vtable}%
+}
+\def\tablecheck#1{%
+  \ifnum \the\catcode`\^^M=\active
+    \endgroup
+    \errmessage{This command won't work in this context; perhaps the problem is
+      that we are \inenvironment\thisenv}%
+    \def\next{\doignore{#1}}%
+  \else
+    \let\next\tablex
+  \fi
+  \next
+}
+\def\tablex#1{%
+  \def\itemindicate{#1}%
+  \parsearg\tabley
+}
+\def\tabley#1{%
+  {%
+    \makevalueexpandable
+    \edef\temp{\noexpand\tablez #1\space\space\space}%
+    \expandafter
+  }\temp \endtablez
+}
+\def\tablez #1 #2 #3 #4\endtablez{%
+  \aboveenvbreak
+  \ifnum 0#1>0 \advance \leftskip by #1\mil \fi
+  \ifnum 0#2>0 \tableindent=#2\mil \fi
+  \ifnum 0#3>0 \advance \rightskip by #3\mil \fi
+  \itemmax=\tableindent
+  \advance \itemmax by -\itemmargin
+  \advance \leftskip by \tableindent
+  \exdentamount=\tableindent
+  \parindent = 0pt
+  \parskip = \smallskipamount
+  \ifdim \parskip=0pt \parskip=2pt \fi
+  \let\item = \internalBitem
+  \let\itemx = \internalBitemx
+}
+\def\Etable{\endgraf\afterenvbreak}
+\let\Eftable\Etable
+\let\Evtable\Etable
+\let\Eitemize\Etable
+\let\Eenumerate\Etable
+
+% This is the counter used by @enumerate, which is really @itemize
+
+\newcount \itemno
+
+\envdef\itemize{\parsearg\doitemize}
+
+\def\doitemize#1{%
+  \aboveenvbreak
+  \itemmax=\itemindent
+  \advance\itemmax by -\itemmargin
+  \advance\leftskip by \itemindent
+  \exdentamount=\itemindent
+  \parindent=0pt
+  \parskip=\smallskipamount
+  \ifdim\parskip=0pt \parskip=2pt \fi
+  %
+  % Try typesetting the item mark so that if the document erroneously says
+  % something like @itemize @samp (intending @table), there's an error
+  % right away at the @itemize.  It's not the best error message in the
+  % world, but it's better than leaving it to the @item.  This means if
+  % the user wants an empty mark, they have to say @w{} not just @w.
+  \def\itemcontents{#1}%
+  \setbox0 = \hbox{\itemcontents}%
+  %
+  % @itemize with no arg is equivalent to @itemize @bullet.
+  \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi
+  %
+  \let\item=\itemizeitem
+}
+
+% Definition of @item while inside @itemize and @enumerate.
+%
+\def\itemizeitem{%
+  \advance\itemno by 1  % for enumerations
+  {\let\par=\endgraf \smallbreak}% reasonable place to break
+  {%
+   % If the document has an @itemize directly after a section title, a
+   % \nobreak will be last on the list, and \sectionheading will have
+   % done a \vskip-\parskip.  In that case, we don't want to zero
+   % parskip, or the item text will crash with the heading.  On the
+   % other hand, when there is normal text preceding the item (as there
+   % usually is), we do want to zero parskip, or there would be too much
+   % space.  In that case, we won't have a \nobreak before.  At least
+   % that's the theory.
+   \ifnum\lastpenalty<10000 \parskip=0in \fi
+   \noindent
+   \hbox to 0pt{\hss \itemcontents \kern\itemmargin}%
+   %
+   \ifinner\else
+     \vadjust{\penalty 1200}% not good to break after first line of item.
+   \fi
+   % We can be in inner vertical mode in a footnote, although an
+   % @itemize looks awful there.
+  }%
+  \flushcr
+}
+
+% \splitoff TOKENS\endmark defines \first to be the first token in
+% TOKENS, and \rest to be the remainder.
+%
+\def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}%
+
+% Allow an optional argument of an uppercase letter, lowercase letter,
+% or number, to specify the first label in the enumerated list.  No
+% argument is the same as `1'.
+%
+\envparseargdef\enumerate{\enumeratey #1  \endenumeratey}
+\def\enumeratey #1 #2\endenumeratey{%
+  % If we were given no argument, pretend we were given `1'.
+  \def\thearg{#1}%
+  \ifx\thearg\empty \def\thearg{1}\fi
+  %
+  % Detect if the argument is a single token.  If so, it might be a
+  % letter.  Otherwise, the only valid thing it can be is a number.
+  % (We will always have one token, because of the test we just made.
+  % This is a good thing, since \splitoff doesn't work given nothing at
+  % all -- the first parameter is undelimited.)
+  \expandafter\splitoff\thearg\endmark
+  \ifx\rest\empty
+    % Only one token in the argument.  It could still be anything.
+    % A ``lowercase letter'' is one whose \lccode is nonzero.
+    % An ``uppercase letter'' is one whose \lccode is both nonzero, and
+    %   not equal to itself.
+    % Otherwise, we assume it's a number.
+    %
+    % We need the \relax at the end of the \ifnum lines to stop TeX from
+    % continuing to look for a <number>.
+    %
+    \ifnum\lccode\expandafter`\thearg=0\relax
+      \numericenumerate % a number (we hope)
+    \else
+      % It's a letter.
+      \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax
+        \lowercaseenumerate % lowercase letter
+      \else
+        \uppercaseenumerate % uppercase letter
+      \fi
+    \fi
+  \else
+    % Multiple tokens in the argument.  We hope it's a number.
+    \numericenumerate
+  \fi
+}
+
+% An @enumerate whose labels are integers.  The starting integer is
+% given in \thearg.
+%
+\def\numericenumerate{%
+  \itemno = \thearg
+  \startenumeration{\the\itemno}%
+}
+
+% The starting (lowercase) letter is in \thearg.
+\def\lowercaseenumerate{%
+  \itemno = \expandafter`\thearg
+  \startenumeration{%
+    % Be sure we're not beyond the end of the alphabet.
+    \ifnum\itemno=0
+      \errmessage{No more lowercase letters in @enumerate; get a bigger
+                  alphabet}%
+    \fi
+    \char\lccode\itemno
+  }%
+}
+
+% The starting (uppercase) letter is in \thearg.
+\def\uppercaseenumerate{%
+  \itemno = \expandafter`\thearg
+  \startenumeration{%
+    % Be sure we're not beyond the end of the alphabet.
+    \ifnum\itemno=0
+      \errmessage{No more uppercase letters in @enumerate; get a bigger
+                  alphabet}
+    \fi
+    \char\uccode\itemno
+  }%
+}
+
+% Call \doitemize, adding a period to the first argument and supplying the
+% common last two arguments.  Also subtract one from the initial value in
+% \itemno, since @item increments \itemno.
+%
+\def\startenumeration#1{%
+  \advance\itemno by -1
+  \doitemize{#1.}\flushcr
+}
+
+% @alphaenumerate and @capsenumerate are abbreviations for giving an arg
+% to @enumerate.
+%
+\def\alphaenumerate{\enumerate{a}}
+\def\capsenumerate{\enumerate{A}}
+\def\Ealphaenumerate{\Eenumerate}
+\def\Ecapsenumerate{\Eenumerate}
+
+
+% @multitable macros
+% Amy Hendrickson, 8/18/94, 3/6/96
+%
+% @multitable ... @end multitable will make as many columns as desired.
+% Contents of each column will wrap at width given in preamble.  Width
+% can be specified either with sample text given in a template line,
+% or in percent of \hsize, the current width of text on page.
+
+% Table can continue over pages but will only break between lines.
+
+% To make preamble:
+%
+% Either define widths of columns in terms of percent of \hsize:
+%   @multitable @columnfractions .25 .3 .45
+%   @item ...
+%
+%   Numbers following @columnfractions are the percent of the total
+%   current hsize to be used for each column. You may use as many
+%   columns as desired.
+
+
+% Or use a template:
+%   @multitable {Column 1 template} {Column 2 template} {Column 3 template}
+%   @item ...
+%   using the widest term desired in each column.
+
+% Each new table line starts with @item, each subsequent new column
+% starts with @tab. Empty columns may be produced by supplying @tab's
+% with nothing between them for as many times as empty columns are needed,
+% ie, @tab@tab@tab will produce two empty columns.
+
+% @item, @tab do not need to be on their own lines, but it will not hurt
+% if they are.
+
+% Sample multitable:
+
+%   @multitable {Column 1 template} {Column 2 template} {Column 3 template}
+%   @item first col stuff @tab second col stuff @tab third col
+%   @item
+%   first col stuff
+%   @tab
+%   second col stuff
+%   @tab
+%   third col
+%   @item first col stuff @tab second col stuff
+%   @tab Many paragraphs of text may be used in any column.
+%
+%         They will wrap at the width determined by the template.
+%   @item@tab@tab This will be in third column.
+%   @end multitable
+
+% Default dimensions may be reset by user.
+% @multitableparskip is vertical space between paragraphs in table.
+% @multitableparindent is paragraph indent in table.
+% @multitablecolmargin is horizontal space to be left between columns.
+% @multitablelinespace is space to leave between table items, baseline
+%                                                            to baseline.
+%   0pt means it depends on current normal line spacing.
+%
+\newskip\multitableparskip
+\newskip\multitableparindent
+\newdimen\multitablecolspace
+\newskip\multitablelinespace
+\multitableparskip=0pt
+\multitableparindent=6pt
+\multitablecolspace=12pt
+\multitablelinespace=0pt
+
+% Macros used to set up halign preamble:
+%
+\let\endsetuptable\relax
+\def\xendsetuptable{\endsetuptable}
+\let\columnfractions\relax
+\def\xcolumnfractions{\columnfractions}
+\newif\ifsetpercent
+
+% #1 is the @columnfraction, usually a decimal number like .5, but might
+% be just 1.  We just use it, whatever it is.
+%
+\def\pickupwholefraction#1 {%
+  \global\advance\colcount by 1
+  \expandafter\xdef\csname col\the\colcount\endcsname{#1\hsize}%
+  \setuptable
+}
+
+\newcount\colcount
+\def\setuptable#1{%
+  \def\firstarg{#1}%
+  \ifx\firstarg\xendsetuptable
+    \let\go = \relax
+  \else
+    \ifx\firstarg\xcolumnfractions
+      \global\setpercenttrue
+    \else
+      \ifsetpercent
+         \let\go\pickupwholefraction
+      \else
+         \global\advance\colcount by 1
+         \setbox0=\hbox{#1\unskip\space}% Add a normal word space as a
+                   % separator; typically that is always in the input, anyway.
+         \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
+      \fi
+    \fi
+    \ifx\go\pickupwholefraction
+      % Put the argument back for the \pickupwholefraction call, so
+      % we'll always have a period there to be parsed.
+      \def\go{\pickupwholefraction#1}%
+    \else
+      \let\go = \setuptable
+    \fi%
+  \fi
+  \go
+}
+
+% multitable-only commands.
+% 
+% @headitem starts a heading row, which we typeset in bold.  Assignments
+% have to be global since we are inside the implicit group of an
+% alignment entry.  \everycr below resets \everytab so we don't have to
+% undo it ourselves.
+\def\headitemfont{\b}% for people to use in the template row; not changeable
+\def\headitem{%
+  \checkenv\multitable
+  \crcr
+  \gdef\headitemcrhook{\nobreak}% attempt to avoid page break after headings
+  \global\everytab={\bf}% can't use \headitemfont since the parsing differs
+  \the\everytab % for the first item
+}%
+%
+% default for tables with no headings.
+\let\headitemcrhook=\relax
+%
+% A \tab used to include \hskip1sp.  But then the space in a template
+% line is not enough.  That is bad.  So let's go back to just `&' until
+% we again encounter the problem the 1sp was intended to solve.
+%					--karl, nathan@acm.org, 20apr99.
+\def\tab{\checkenv\multitable &\the\everytab}%
+
+% @multitable ... @end multitable definitions:
+%
+\newtoks\everytab  % insert after every tab.
+%
+\envdef\multitable{%
+  \vskip\parskip
+  \startsavinginserts
+  %
+  % @item within a multitable starts a normal row.
+  % We use \def instead of \let so that if one of the multitable entries
+  % contains an @itemize, we don't choke on the \item (seen as \crcr aka
+  % \endtemplate) expanding \doitemize.
+  \def\item{\crcr}%
+  %
+  \tolerance=9500
+  \hbadness=9500
+  \setmultitablespacing
+  \parskip=\multitableparskip
+  \parindent=\multitableparindent
+  \overfullrule=0pt
+  \global\colcount=0
+  %
+  \everycr = {%
+    \noalign{%
+      \global\everytab={}% Reset from possible headitem.
+      \global\colcount=0 % Reset the column counter.
+      %
+      % Check for saved footnotes, etc.:
+      \checkinserts
+      %
+      % Perhaps a \nobreak, then reset:
+      \headitemcrhook
+      \global\let\headitemcrhook=\relax
+    }%
+  }%
+  %
+  \parsearg\domultitable
+}
+\def\domultitable#1{%
+  % To parse everything between @multitable and @item:
+  \setuptable#1 \endsetuptable
+  %
+  % This preamble sets up a generic column definition, which will
+  % be used as many times as user calls for columns.
+  % \vtop will set a single line and will also let text wrap and
+  % continue for many paragraphs if desired.
+  \halign\bgroup &%
+    \global\advance\colcount by 1
+    \multistrut
+    \vtop{%
+      % Use the current \colcount to find the correct column width:
+      \hsize=\expandafter\csname col\the\colcount\endcsname
+      %
+      % In order to keep entries from bumping into each other
+      % we will add a \leftskip of \multitablecolspace to all columns after
+      % the first one.
+      %
+      % If a template has been used, we will add \multitablecolspace
+      % to the width of each template entry.
+      %
+      % If the user has set preamble in terms of percent of \hsize we will
+      % use that dimension as the width of the column, and the \leftskip
+      % will keep entries from bumping into each other.  Table will start at
+      % left margin and final column will justify at right margin.
+      %
+      % Make sure we don't inherit \rightskip from the outer environment.
+      \rightskip=0pt
+      \ifnum\colcount=1
+	% The first column will be indented with the surrounding text.
+	\advance\hsize by\leftskip
+      \else
+	\ifsetpercent \else
+	  % If user has not set preamble in terms of percent of \hsize
+	  % we will advance \hsize by \multitablecolspace.
+	  \advance\hsize by \multitablecolspace
+	\fi
+       % In either case we will make \leftskip=\multitablecolspace:
+      \leftskip=\multitablecolspace
+      \fi
+      % Ignoring space at the beginning and end avoids an occasional spurious
+      % blank line, when TeX decides to break the line at the space before the
+      % box from the multistrut, so the strut ends up on a line by itself.
+      % For example:
+      % @multitable @columnfractions .11 .89
+      % @item @code{#}
+      % @tab Legal holiday which is valid in major parts of the whole country.
+      % Is automatically provided with highlighting sequences respectively
+      % marking characters.
+      \noindent\ignorespaces##\unskip\multistrut
+    }\cr
+}
+\def\Emultitable{%
+  \crcr
+  \egroup % end the \halign
+  \global\setpercentfalse
+}
+
+\def\setmultitablespacing{%
+  \def\multistrut{\strut}% just use the standard line spacing
+  %
+  % Compute \multitablelinespace (if not defined by user) for use in
+  % \multitableparskip calculation.  We used define \multistrut based on
+  % this, but (ironically) that caused the spacing to be off.
+  % See bug-texinfo report from Werner Lemberg, 31 Oct 2004 12:52:20 +0100.
+\ifdim\multitablelinespace=0pt
+\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
+\global\advance\multitablelinespace by-\ht0
+\fi
+% Test to see if parskip is larger than space between lines of
+% table. If not, do nothing.
+%        If so, set to same dimension as multitablelinespace.
+\ifdim\multitableparskip>\multitablelinespace
+\global\multitableparskip=\multitablelinespace
+\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller
+                                      % than skip between lines in the table.
+\fi%
+\ifdim\multitableparskip=0pt
+\global\multitableparskip=\multitablelinespace
+\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller
+                                      % than skip between lines in the table.
+\fi}
+
+
+\message{conditionals,}
+
+% @iftex, @ifnotdocbook, @ifnothtml, @ifnotinfo, @ifnotplaintext,
+% @ifnotxml always succeed.  They currently do nothing; we don't
+% attempt to check whether the conditionals are properly nested.  But we
+% have to remember that they are conditionals, so that @end doesn't
+% attempt to close an environment group.
+%
+\def\makecond#1{%
+  \expandafter\let\csname #1\endcsname = \relax
+  \expandafter\let\csname iscond.#1\endcsname = 1
+}
+\makecond{iftex}
+\makecond{ifnotdocbook}
+\makecond{ifnothtml}
+\makecond{ifnotinfo}
+\makecond{ifnotplaintext}
+\makecond{ifnotxml}
+
+% Ignore @ignore, @ifhtml, @ifinfo, and the like.
+%
+\def\direntry{\doignore{direntry}}
+\def\documentdescription{\doignore{documentdescription}}
+\def\docbook{\doignore{docbook}}
+\def\html{\doignore{html}}
+\def\ifdocbook{\doignore{ifdocbook}}
+\def\ifhtml{\doignore{ifhtml}}
+\def\ifinfo{\doignore{ifinfo}}
+\def\ifnottex{\doignore{ifnottex}}
+\def\ifplaintext{\doignore{ifplaintext}}
+\def\ifxml{\doignore{ifxml}}
+\def\ignore{\doignore{ignore}}
+\def\menu{\doignore{menu}}
+\def\xml{\doignore{xml}}
+
+% Ignore text until a line `@end #1', keeping track of nested conditionals.
+%
+% A count to remember the depth of nesting.
+\newcount\doignorecount
+
+\def\doignore#1{\begingroup
+  % Scan in ``verbatim'' mode:
+  \obeylines
+  \catcode`\@ = \other
+  \catcode`\{ = \other
+  \catcode`\} = \other
+  %
+  % Make sure that spaces turn into tokens that match what \doignoretext wants.
+  \spaceisspace
+  %
+  % Count number of #1's that we've seen.
+  \doignorecount = 0
+  %
+  % Swallow text until we reach the matching `@end #1'.
+  \dodoignore{#1}%
+}
+
+{ \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source.
+  \obeylines %
+  %
+  \gdef\dodoignore#1{%
+    % #1 contains the command name as a string, e.g., `ifinfo'.
+    %
+    % Define a command to find the next `@end #1'.
+    \long\def\doignoretext##1^^M@end #1{%
+      \doignoretextyyy##1^^M@#1\_STOP_}%
+    %
+    % And this command to find another #1 command, at the beginning of a
+    % line.  (Otherwise, we would consider a line `@c @ifset', for
+    % example, to count as an @ifset for nesting.)
+    \long\def\doignoretextyyy##1^^M@#1##2\_STOP_{\doignoreyyy{##2}\_STOP_}%
+    %
+    % And now expand that command.
+    \doignoretext ^^M%
+  }%
+}
+
+\def\doignoreyyy#1{%
+  \def\temp{#1}%
+  \ifx\temp\empty			% Nothing found.
+    \let\next\doignoretextzzz
+  \else					% Found a nested condition, ...
+    \advance\doignorecount by 1
+    \let\next\doignoretextyyy		% ..., look for another.
+    % If we're here, #1 ends with ^^M\ifinfo (for example).
+  \fi
+  \next #1% the token \_STOP_ is present just after this macro.
+}
+
+% We have to swallow the remaining "\_STOP_".
+%
+\def\doignoretextzzz#1{%
+  \ifnum\doignorecount = 0	% We have just found the outermost @end.
+    \let\next\enddoignore
+  \else				% Still inside a nested condition.
+    \advance\doignorecount by -1
+    \let\next\doignoretext      % Look for the next @end.
+  \fi
+  \next
+}
+
+% Finish off ignored text.
+{ \obeylines%
+  % Ignore anything after the last `@end #1'; this matters in verbatim
+  % environments, where otherwise the newline after an ignored conditional
+  % would result in a blank line in the output.
+  \gdef\enddoignore#1^^M{\endgroup\ignorespaces}%
+}
+
+
+% @set VAR sets the variable VAR to an empty value.
+% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
+%
+% Since we want to separate VAR from REST-OF-LINE (which might be
+% empty), we can't just use \parsearg; we have to insert a space of our
+% own to delimit the rest of the line, and then take it out again if we
+% didn't need it.
+% We rely on the fact that \parsearg sets \catcode`\ =10.
+%
+\parseargdef\set{\setyyy#1 \endsetyyy}
+\def\setyyy#1 #2\endsetyyy{%
+  {%
+    \makevalueexpandable
+    \def\temp{#2}%
+    \edef\next{\gdef\makecsname{SET#1}}%
+    \ifx\temp\empty
+      \next{}%
+    \else
+      \setzzz#2\endsetzzz
+    \fi
+  }%
+}
+% Remove the trailing space \setxxx inserted.
+\def\setzzz#1 \endsetzzz{\next{#1}}
+
+% @clear VAR clears (i.e., unsets) the variable VAR.
+%
+\parseargdef\clear{%
+  {%
+    \makevalueexpandable
+    \global\expandafter\let\csname SET#1\endcsname=\relax
+  }%
+}
+
+% @value{foo} gets the text saved in variable foo.
+\def\value{\begingroup\makevalueexpandable\valuexxx}
+\def\valuexxx#1{\expandablevalue{#1}\endgroup}
+{
+  \catcode`\-=\active \catcode`\_=\active
+  %
+  \gdef\makevalueexpandable{%
+    \let\value = \expandablevalue
+    % We don't want these characters active, ...
+    \catcode`\-=\other \catcode`\_=\other
+    % ..., but we might end up with active ones in the argument if
+    % we're called from @code, as @code{@value{foo-bar_}}, though.
+    % So \let them to their normal equivalents.
+    \let-\normaldash \let_\normalunderscore
+  }
+}
+
+% We have this subroutine so that we can handle at least some @value's
+% properly in indexes (we call \makevalueexpandable in \indexdummies).
+% The command has to be fully expandable (if the variable is set), since
+% the result winds up in the index file.  This means that if the
+% variable's value contains other Texinfo commands, it's almost certain
+% it will fail (although perhaps we could fix that with sufficient work
+% to do a one-level expansion on the result, instead of complete).
+% 
+% Unfortunately, this has the consequence that when _ is in the *value*
+% of an @set, it does not print properly in the roman fonts (get the cmr
+% dot accent at position 126 instead).  No fix comes to mind, and it's
+% been this way since 2003 or earlier, so just ignore it.
+% 
+\def\expandablevalue#1{%
+  \expandafter\ifx\csname SET#1\endcsname\relax
+    {[No value for ``#1'']}%
+    \message{Variable `#1', used in @value, is not set.}%
+  \else
+    \csname SET#1\endcsname
+  \fi
+}
+
+% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
+% with @set.
+% 
+% To get the special treatment we need for `@end ifset,' we call
+% \makecond and then redefine.
+%
+\makecond{ifset}
+\def\ifset{\parsearg{\doifset{\let\next=\ifsetfail}}}
+\def\doifset#1#2{%
+  {%
+    \makevalueexpandable
+    \let\next=\empty
+    \expandafter\ifx\csname SET#2\endcsname\relax
+      #1% If not set, redefine \next.
+    \fi
+    \expandafter
+  }\next
+}
+\def\ifsetfail{\doignore{ifset}}
+
+% @ifclear VAR ... @end executes the `...' iff VAR has never been
+% defined with @set, or has been undefined with @clear.
+%
+% The `\else' inside the `\doifset' parameter is a trick to reuse the
+% above code: if the variable is not set, do nothing, if it is set,
+% then redefine \next to \ifclearfail.
+%
+\makecond{ifclear}
+\def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}}
+\def\ifclearfail{\doignore{ifclear}}
+
+% @ifcommandisdefined CMD ... @end executes the `...' if CMD (written
+% without the @) is in fact defined.  We can only feasibly check at the
+% TeX level, so something like `mathcode' is going to considered
+% defined even though it is not a Texinfo command.
+% 
+\makecond{ifcommanddefined}
+\def\ifcommanddefined{\parsearg{\doifcmddefined{\let\next=\ifcmddefinedfail}}}
+%
+\def\doifcmddefined#1#2{{%
+    \makevalueexpandable
+    \let\next=\empty
+    \expandafter\ifx\csname #2\endcsname\relax
+      #1% If not defined, \let\next as above.
+    \fi
+    \expandafter
+  }\next
+}
+\def\ifcmddefinedfail{\doignore{ifcommanddefined}}
+
+% @ifcommandnotdefined CMD ... handled similar to @ifclear above.
+\makecond{ifcommandnotdefined}
+\def\ifcommandnotdefined{%
+  \parsearg{\doifcmddefined{\else \let\next=\ifcmdnotdefinedfail}}}
+\def\ifcmdnotdefinedfail{\doignore{ifcommandnotdefined}}
+
+% Set the `txicommandconditionals' variable, so documents have a way to
+% test if the @ifcommand...defined conditionals are available.
+\set txicommandconditionals
+
+% @dircategory CATEGORY  -- specify a category of the dir file
+% which this file should belong to.  Ignore this in TeX.
+\let\dircategory=\comment
+
+% @defininfoenclose.
+\let\definfoenclose=\comment
+
+
+\message{indexing,}
+% Index generation facilities
+
+% Define \newwrite to be identical to plain tex's \newwrite
+% except not \outer, so it can be used within macros and \if's.
+\edef\newwrite{\makecsname{ptexnewwrite}}
+
+% \newindex {foo} defines an index named IX.
+% It automatically defines \IXindex such that
+% \IXindex ...rest of line... puts an entry in the index IX.
+% It also defines \IXindfile to be the number of the output channel for
+% the file that accumulates this index.  The file's extension is IX.
+% The name of an index should be no more than 2 characters long
+% for the sake of vms.
+%
+\def\newindex#1{%
+  \expandafter\chardef\csname#1indfile\endcsname=0
+  \expandafter\xdef\csname#1index\endcsname{%     % Define @#1index
+    \noexpand\doindex{#1}}
+}
+
+% @defindex foo  ==  \newindex{foo}
+%
+\def\defindex{\parsearg\newindex}
+
+% Define @defcodeindex, like @defindex except put all entries in @code.
+%
+\def\defcodeindex{\parsearg\newcodeindex}
+%
+\def\newcodeindex#1{%
+  \expandafter\chardef\csname#1indfile\endcsname=0
+  \expandafter\xdef\csname#1index\endcsname{%
+    \noexpand\docodeindex{#1}}%
+}
+
+% The default indices:
+\newindex{cp}%      concepts,
+\newcodeindex{fn}%  functions,
+\newcodeindex{vr}%  variables,
+\newcodeindex{tp}%  types,
+\newcodeindex{ky}%  keys
+\newcodeindex{pg}%  and programs.
+
+
+% @synindex foo bar    makes index foo feed into index bar.
+% Do this instead of @defindex foo if you don't want it as a separate index.
+%
+% @syncodeindex foo bar   similar, but put all entries made for index foo
+% inside @code.
+%
+\def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}}
+\def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}}
+
+% #1 is \doindex or \docodeindex, #2 the index getting redefined (foo),
+% #3 the target index (bar).
+\def\dosynindex#1#2#3{%
+  % Only do \closeout if we haven't already done it, else we'll end up
+  % closing the target index.
+  \expandafter \ifx\csname donesynindex#2\endcsname \relax
+    % The \closeout helps reduce unnecessary open files; the limit on the
+    % Acorn RISC OS is a mere 16 files.
+    \expandafter\closeout\csname#2indfile\endcsname
+    \expandafter\let\csname donesynindex#2\endcsname = 1
+  \fi
+  % redefine \fooindfile:
+  \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname
+  \expandafter\let\csname#2indfile\endcsname=\temp
+  % redefine \fooindex:
+  \expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}%
+}
+
+% Define \doindex, the driver for all index macros.
+% Argument #1 is generated by the calling \fooindex macro,
+% and it the two-letter name of the index.
+
+\def\doindex#1{\edef\indexname{#1}\parsearg\doindexxxx}
+\def\doindexxxx #1{\doind{\indexname}{#1}}
+
+% like the previous two, but they put @code around the argument.
+\def\docodeindex#1{\edef\indexname{#1}\parsearg\docodeindexxxx}
+\def\docodeindexxxx #1{\doind{\indexname}{\code{#1}}}
+
+% Used when writing an index entry out to an index file, to prevent
+% expansion of Texinfo commands that can appear in an index entry.
+%
+\def\indexdummies{%
+  \escapechar = `\\     % use backslash in output files.
+  \def\@{@}% change to @@ when we switch to @ as escape char in index files.
+  \def\ {\realbackslash\space }%
+  %
+  % Need these unexpandable (because we define \tt as a dummy)
+  % definitions when @{ or @} appear in index entry text.  Also, more
+  % complicated, when \tex is in effect and \{ is a \delimiter again.
+  % We can't use \lbracecmd and \rbracecmd because texindex assumes
+  % braces and backslashes are used only as delimiters.  Perhaps we
+  % should use @lbracechar and @rbracechar?
+  \def\{{{\tt\char123}}%
+  \def\}{{\tt\char125}}%
+  %
+  % Do the redefinitions.
+  \commondummies
+}
+
+% For the aux and toc files, @ is the escape character.  So we want to
+% redefine everything using @ as the escape character (instead of
+% \realbackslash, still used for index files).  When everything uses @,
+% this will be simpler.
+%
+\def\atdummies{%
+  \def\@{@@}%
+  \def\ {@ }%
+  \let\{ = \lbraceatcmd
+  \let\} = \rbraceatcmd
+  %
+  % Do the redefinitions.
+  \commondummies
+  \otherbackslash
+}
+
+% Called from \indexdummies and \atdummies.
+%
+\def\commondummies{%
+  % \definedummyword defines \#1 as \string\#1\space, thus effectively
+  % preventing its expansion.  This is used only for control words,
+  % not control letters, because the \space would be incorrect for
+  % control characters, but is needed to separate the control word
+  % from whatever follows.
+  %
+  % For control letters, we have \definedummyletter, which omits the
+  % space.
+  %
+  % These can be used both for control words that take an argument and
+  % those that do not.  If it is followed by {arg} in the input, then
+  % that will dutifully get written to the index (or wherever).
+  %
+  \def\definedummyword  ##1{\def##1{\string##1\space}}%
+  \def\definedummyletter##1{\def##1{\string##1}}%
+  \let\definedummyaccent\definedummyletter
+  %
+  \commondummiesnofonts
+  %
+  \definedummyletter\_%
+  \definedummyletter\-%
+  %
+  % Non-English letters.
+  \definedummyword\AA
+  \definedummyword\AE
+  \definedummyword\DH
+  \definedummyword\L
+  \definedummyword\O
+  \definedummyword\OE
+  \definedummyword\TH
+  \definedummyword\aa
+  \definedummyword\ae
+  \definedummyword\dh
+  \definedummyword\exclamdown
+  \definedummyword\l
+  \definedummyword\o
+  \definedummyword\oe
+  \definedummyword\ordf
+  \definedummyword\ordm
+  \definedummyword\questiondown
+  \definedummyword\ss
+  \definedummyword\th
+  %
+  % Although these internal commands shouldn't show up, sometimes they do.
+  \definedummyword\bf
+  \definedummyword\gtr
+  \definedummyword\hat
+  \definedummyword\less
+  \definedummyword\sf
+  \definedummyword\sl
+  \definedummyword\tclose
+  \definedummyword\tt
+  %
+  \definedummyword\LaTeX
+  \definedummyword\TeX
+  %
+  % Assorted special characters.
+  \definedummyword\arrow
+  \definedummyword\bullet
+  \definedummyword\comma
+  \definedummyword\copyright
+  \definedummyword\registeredsymbol
+  \definedummyword\dots
+  \definedummyword\enddots
+  \definedummyword\entrybreak
+  \definedummyword\equiv
+  \definedummyword\error
+  \definedummyword\euro
+  \definedummyword\expansion
+  \definedummyword\geq
+  \definedummyword\guillemetleft
+  \definedummyword\guillemetright
+  \definedummyword\guilsinglleft
+  \definedummyword\guilsinglright
+  \definedummyword\lbracechar
+  \definedummyword\leq
+  \definedummyword\mathopsup
+  \definedummyword\minus
+  \definedummyword\ogonek
+  \definedummyword\pounds
+  \definedummyword\point
+  \definedummyword\print
+  \definedummyword\quotedblbase
+  \definedummyword\quotedblleft
+  \definedummyword\quotedblright
+  \definedummyword\quoteleft
+  \definedummyword\quoteright
+  \definedummyword\quotesinglbase
+  \definedummyword\rbracechar
+  \definedummyword\result
+  \definedummyword\sub
+  \definedummyword\sup
+  \definedummyword\textdegree
+  %
+  % We want to disable all macros so that they are not expanded by \write.
+  \macrolist
+  %
+  \normalturnoffactive
+  %
+  % Handle some cases of @value -- where it does not contain any
+  % (non-fully-expandable) commands.
+  \makevalueexpandable
+}
+
+% \commondummiesnofonts: common to \commondummies and \indexnofonts.
+% Define \definedumyletter, \definedummyaccent and \definedummyword before
+% using.
+%
+\def\commondummiesnofonts{%
+  % Control letters and accents.
+  \definedummyletter\!%
+  \definedummyaccent\"%
+  \definedummyaccent\'%
+  \definedummyletter\*%
+  \definedummyaccent\,%
+  \definedummyletter\.%
+  \definedummyletter\/%
+  \definedummyletter\:%
+  \definedummyaccent\=%
+  \definedummyletter\?%
+  \definedummyaccent\^%
+  \definedummyaccent\`%
+  \definedummyaccent\~%
+  \definedummyword\u
+  \definedummyword\v
+  \definedummyword\H
+  \definedummyword\dotaccent
+  \definedummyword\ogonek
+  \definedummyword\ringaccent
+  \definedummyword\tieaccent
+  \definedummyword\ubaraccent
+  \definedummyword\udotaccent
+  \definedummyword\dotless
+  %
+  % Texinfo font commands.
+  \definedummyword\b
+  \definedummyword\i
+  \definedummyword\r
+  \definedummyword\sansserif
+  \definedummyword\sc
+  \definedummyword\slanted
+  \definedummyword\t
+  %
+  % Commands that take arguments.
+  \definedummyword\abbr
+  \definedummyword\acronym
+  \definedummyword\anchor
+  \definedummyword\cite
+  \definedummyword\code
+  \definedummyword\command
+  \definedummyword\dfn
+  \definedummyword\dmn
+  \definedummyword\email
+  \definedummyword\emph
+  \definedummyword\env
+  \definedummyword\file
+  \definedummyword\image
+  \definedummyword\indicateurl
+  \definedummyword\inforef
+  \definedummyword\kbd
+  \definedummyword\key
+  \definedummyword\math
+  \definedummyword\option
+  \definedummyword\pxref
+  \definedummyword\ref
+  \definedummyword\samp
+  \definedummyword\strong
+  \definedummyword\tie
+  \definedummyword\U
+  \definedummyword\uref
+  \definedummyword\url
+  \definedummyword\var
+  \definedummyword\verb
+  \definedummyword\w
+  \definedummyword\xref
+}
+
+% For testing: output @{ and @} in index sort strings as \{ and \}.
+\newif\ifusebracesinindexes
+
+\let\indexlbrace\relax
+\let\indexrbrace\relax
+
+{\catcode`\@=0
+\catcode`\\=13
+  @gdef@backslashdisappear{@def\{}}
+}
+
+{
+\catcode`\<=13
+\catcode`\-=13
+\catcode`\`=13
+  \gdef\indexnonalnumdisappear{%
+    \expandafter\ifx\csname SETtxiindexlquoteignore\endcsname\relax\else
+      % @set txiindexlquoteignore makes us ignore left quotes in the sort term.
+      % (Introduced for FSFS 2nd ed.)
+      \let`=\empty
+    \fi
+    %
+    \expandafter\ifx\csname SETtxiindexbackslashignore\endcsname\relax\else
+      \backslashdisappear
+    \fi
+    %
+    \expandafter\ifx\csname SETtxiindexhyphenignore\endcsname\relax\else
+      \def-{}%
+    \fi
+    \expandafter\ifx\csname SETtxiindexlessthanignore\endcsname\relax\else
+      \def<{}%
+    \fi
+    \expandafter\ifx\csname SETtxiindexatsignignore\endcsname\relax\else
+      \def\@{}%
+    \fi
+  }
+
+  \gdef\indexnonalnumreappear{%
+    \useindexbackslash
+    \let-\normaldash
+    \let<\normalless
+    \def\@{@}%
+  }
+}
+
+
+% \indexnofonts is used when outputting the strings to sort the index
+% by, and when constructing control sequence names.  It eliminates all
+% control sequences and just writes whatever the best ASCII sort string
+% would be for a given command (usually its argument).
+%
+\def\indexnofonts{%
+  % Accent commands should become @asis.
+  \def\definedummyaccent##1{\let##1\asis}%
+  % We can just ignore other control letters.
+  \def\definedummyletter##1{\let##1\empty}%
+  % All control words become @asis by default; overrides below.
+  \let\definedummyword\definedummyaccent
+  \commondummiesnofonts
+  %
+  % Don't no-op \tt, since it isn't a user-level command
+  % and is used in the definitions of the active chars like <, >, |, etc.
+  % Likewise with the other plain tex font commands.
+  %\let\tt=\asis
+  %
+  \def\ { }%
+  \def\@{@}%
+  \def\_{\normalunderscore}%
+  \def\-{}% @- shouldn't affect sorting
+  %
+  \def\lbracechar{{\indexlbrace}}%
+  \def\rbracechar{{\indexrbrace}}%
+  \let\{=\lbracechar
+  \let\}=\rbracechar
+  %
+  %
+  % Non-English letters.
+  \def\AA{AA}%
+  \def\AE{AE}%
+  \def\DH{DZZ}%
+  \def\L{L}%
+  \def\OE{OE}%
+  \def\O{O}%
+  \def\TH{TH}%
+  \def\aa{aa}%
+  \def\ae{ae}%
+  \def\dh{dzz}%
+  \def\exclamdown{!}%
+  \def\l{l}%
+  \def\oe{oe}%
+  \def\ordf{a}%
+  \def\ordm{o}%
+  \def\o{o}%
+  \def\questiondown{?}%
+  \def\ss{ss}%
+  \def\th{th}%
+  %
+  \def\LaTeX{LaTeX}%
+  \def\TeX{TeX}%
+  %
+  % Assorted special characters.
+  % (The following {} will end up in the sort string, but that's ok.)
+  \def\arrow{->}%
+  \def\bullet{bullet}%
+  \def\comma{,}%
+  \def\copyright{copyright}%
+  \def\dots{...}%
+  \def\enddots{...}%
+  \def\equiv{==}%
+  \def\error{error}%
+  \def\euro{euro}%
+  \def\expansion{==>}%
+  \def\geq{>=}%
+  \def\guillemetleft{<<}%
+  \def\guillemetright{>>}%
+  \def\guilsinglleft{<}%
+  \def\guilsinglright{>}%
+  \def\leq{<=}%
+  \def\minus{-}%
+  \def\point{.}%
+  \def\pounds{pounds}%
+  \def\print{-|}%
+  \def\quotedblbase{"}%
+  \def\quotedblleft{"}%
+  \def\quotedblright{"}%
+  \def\quoteleft{`}%
+  \def\quoteright{'}%
+  \def\quotesinglbase{,}%
+  \def\registeredsymbol{R}%
+  \def\result{=>}%
+  \def\textdegree{o}%
+  %
+  % We need to get rid of all macros, leaving only the arguments (if present).
+  % Of course this is not nearly correct, but it is the best we can do for now.
+  % makeinfo does not expand macros in the argument to @deffn, which ends up
+  % writing an index entry, and texindex isn't prepared for an index sort entry
+  % that starts with \.
+  %
+  % Since macro invocations are followed by braces, we can just redefine them
+  % to take a single TeX argument.  The case of a macro invocation that
+  % goes to end-of-line is not handled.
+  %
+  \macrolist
+}
+
+
+\let\SETmarginindex=\relax % put index entries in margin (undocumented)?
+
+% Most index entries go through here, but \dosubind is the general case.
+% #1 is the index name, #2 is the entry text.
+\def\doind#1#2{\dosubind{#1}{#2}{}}
+
+% There is also \dosubind {index}{topic}{subtopic}
+% which makes an entry in a two-level index such as the operation index.
+% TODO: Two-level index?  Operation index?
+
+% Workhorse for all indexes.
+% #1 is name of index, #2 is stuff to put there, #3 is subentry --
+% empty if called from \doind, as we usually are (the main exception
+% is with most defuns, which call us directly).
+%
+\def\dosubind#1#2#3{%
+  \iflinks
+  {%
+    \requireopenindexfile{#1}%
+    % Store the main index entry text (including the third arg).
+    \toks0 = {#2}%
+    % If third arg is present, precede it with a space.
+    \def\thirdarg{#3}%
+    \ifx\thirdarg\empty \else
+      \toks0 = \expandafter{\the\toks0 \space #3}%
+    \fi
+    %
+    \edef\writeto{\csname#1indfile\endcsname}%
+    %
+    \safewhatsit\dosubindwrite
+  }%
+  \fi
+}
+
+% Check if an index file has been opened, and if not, open it.
+\def\requireopenindexfile#1{%
+\ifnum\csname #1indfile\endcsname=0
+  \expandafter\newwrite \csname#1indfile\endcsname
+  \edef\suffix{#1}%
+  % A .fls suffix would conflict with the file extension for the output
+  % of -recorder, so use .f1s instead.
+  \ifx\suffix\indexisfl\def\suffix{f1}\fi
+  % Open the file
+  \immediate\openout\csname#1indfile\endcsname \jobname.\suffix
+  % Using \immediate here prevents an object entering into the current box,
+  % which could confound checks such as those in \safewhatsit for preceding
+  % skips.
+\fi}
+\def\indexisfl{fl}
+
+% Output \ as {\indexbackslash}, because \ is an escape character in
+% the index files.
+\let\indexbackslash=\relax
+{\catcode`\@=0 \catcode`\\=\active
+  @gdef@useindexbackslash{@def\{{@indexbackslash}}}
+}
+
+% Definition for writing index entry text.
+\def\sortas#1{\ignorespaces}%
+
+% Definition for writing index entry sort key.  Should occur at the at
+% the beginning of the index entry, like
+%     @cindex @sortas{september} \september
+% The \ignorespaces takes care of following space, but there's no way
+% to remove space before it.
+{
+\catcode`\-=13
+\gdef\indexwritesortas{%
+  \begingroup
+  \indexnonalnumreappear
+  \indexwritesortasxxx}
+\gdef\indexwritesortasxxx#1{%
+  \xdef\indexsortkey{#1}\endgroup}
+}
+
+
+% Write the entry in \toks0 to the index file.
+%
+\def\dosubindwrite{%
+  % Put the index entry in the margin if desired.
+  \ifx\SETmarginindex\relax\else
+    \insert\margin{\hbox{\vrule height8pt depth3pt width0pt \the\toks0}}%
+  \fi
+  %
+  % Remember, we are within a group.
+  \indexdummies % Must do this here, since \bf, etc expand at this stage
+  \useindexbackslash % \indexbackslash isn't defined now so it will be output 
+                     % as is; and it will print as backslash.
+  % Get the string to sort by, by processing the index entry with all
+  % font commands turned off.
+  {\indexnofonts
+   \indexnonalnumdisappear
+   \xdef\indexsortkey{}%
+   \let\sortas=\indexwritesortas
+   \edef\temp{\the\toks0}%
+   \setbox\dummybox = \hbox{\temp}% Make sure to execute any \sortas
+   \ifx\indexsortkey\empty
+     \xdef\indexsortkey{\temp}%
+     \ifx\indexsortkey\empty\xdef\indexsortkey{ }\fi
+   \fi
+  }%
+  %
+  % Set up the complete index entry, with both the sort key and
+  % the original text, including any font commands.  We write
+  % three arguments to \entry to the .?? file (four in the
+  % subentry case), texindex reduces to two when writing the .??s
+  % sorted result.
+  \edef\temp{%
+    \write\writeto{%
+      \string\entry{\indexsortkey}{\noexpand\folio}{\the\toks0}}%
+  }%
+  \temp
+}
+\newbox\dummybox % used above
+
+% Take care of unwanted page breaks/skips around a whatsit:
+%
+% If a skip is the last thing on the list now, preserve it
+% by backing up by \lastskip, doing the \write, then inserting
+% the skip again.  Otherwise, the whatsit generated by the
+% \write or \pdfdest will make \lastskip zero.  The result is that
+% sequences like this:
+% @end defun
+% @tindex whatever
+% @defun ...
+% will have extra space inserted, because the \medbreak in the
+% start of the @defun won't see the skip inserted by the @end of
+% the previous defun.
+%
+% But don't do any of this if we're not in vertical mode.  We
+% don't want to do a \vskip and prematurely end a paragraph.
+%
+% Avoid page breaks due to these extra skips, too.
+%
+% But wait, there is a catch there:
+% We'll have to check whether \lastskip is zero skip.  \ifdim is not
+% sufficient for this purpose, as it ignores stretch and shrink parts
+% of the skip.  The only way seems to be to check the textual
+% representation of the skip.
+%
+% The following is almost like \def\zeroskipmacro{0.0pt} except that
+% the ``p'' and ``t'' characters have catcode \other, not 11 (letter).
+%
+\edef\zeroskipmacro{\expandafter\the\csname z@skip\endcsname}
+%
+\newskip\whatsitskip
+\newcount\whatsitpenalty
+%
+% ..., ready, GO:
+%
+\def\safewhatsit#1{\ifhmode
+  #1%
+ \else
+  % \lastskip and \lastpenalty cannot both be nonzero simultaneously.
+  \whatsitskip = \lastskip
+  \edef\lastskipmacro{\the\lastskip}%
+  \whatsitpenalty = \lastpenalty
+  %
+  % If \lastskip is nonzero, that means the last item was a
+  % skip.  And since a skip is discardable, that means this
+  % -\whatsitskip glue we're inserting is preceded by a
+  % non-discardable item, therefore it is not a potential
+  % breakpoint, therefore no \nobreak needed.
+  \ifx\lastskipmacro\zeroskipmacro
+  \else
+    \vskip-\whatsitskip
+  \fi
+  %
+  #1%
+  %
+  \ifx\lastskipmacro\zeroskipmacro
+    % If \lastskip was zero, perhaps the last item was a penalty, and
+    % perhaps it was >=10000, e.g., a \nobreak.  In that case, we want
+    % to re-insert the same penalty (values >10000 are used for various
+    % signals); since we just inserted a non-discardable item, any
+    % following glue (such as a \parskip) would be a breakpoint.  For example:
+    %   @deffn deffn-whatever
+    %   @vindex index-whatever
+    %   Description.
+    % would allow a break between the index-whatever whatsit
+    % and the "Description." paragraph.
+    \ifnum\whatsitpenalty>9999 \penalty\whatsitpenalty \fi
+  \else
+    % On the other hand, if we had a nonzero \lastskip,
+    % this make-up glue would be preceded by a non-discardable item
+    % (the whatsit from the \write), so we must insert a \nobreak.
+    \nobreak\vskip\whatsitskip
+  \fi
+\fi}
+
+% The index entry written in the file actually looks like
+%  \entry {sortstring}{page}{topic}
+% or
+%  \entry {sortstring}{page}{topic}{subtopic}
+% The texindex program reads in these files and writes files
+% containing these kinds of lines:
+%  \initial {c}
+%     before the first topic whose initial is c
+%  \entry {topic}{pagelist}
+%     for a topic that is used without subtopics
+%  \primary {topic}
+%     for the beginning of a topic that is used with subtopics
+%  \secondary {subtopic}{pagelist}
+%     for each subtopic.
+
+% Define the user-accessible indexing commands
+% @findex, @vindex, @kindex, @cindex.
+
+\def\findex {\fnindex}
+\def\kindex {\kyindex}
+\def\cindex {\cpindex}
+\def\vindex {\vrindex}
+\def\tindex {\tpindex}
+\def\pindex {\pgindex}
+
+\def\cindexsub {\begingroup\obeylines\cindexsub}
+{\obeylines %
+\gdef\cindexsub "#1" #2^^M{\endgroup %
+\dosubind{cp}{#2}{#1}}}
+
+% Define the macros used in formatting output of the sorted index material.
+
+% @printindex causes a particular index (the ??s file) to get printed.
+% It does not print any chapter heading (usually an @unnumbered).
+%
+\parseargdef\printindex{\begingroup
+  \dobreak \chapheadingskip{10000}%
+  %
+  \smallfonts \rm
+  \tolerance = 9500
+  \plainfrenchspacing
+  \everypar = {}% don't want the \kern\-parindent from indentation suppression.
+  %
+  % See if the index file exists and is nonempty.
+  % Change catcode of @ here so that if the index file contains
+  % \initial {@}
+  % as its first line, TeX doesn't complain about mismatched braces
+  % (because it thinks @} is a control sequence).
+  \catcode`\@ = 11
+  % See comment in \requireopenindexfile.
+  \def\indexname{#1}\ifx\indexname\indexisfl\def\indexname{f1}\fi
+  \openin 1 \jobname.\indexname s
+  \ifeof 1
+    % \enddoublecolumns gets confused if there is no text in the index,
+    % and it loses the chapter title and the aux file entries for the
+    % index.  The easiest way to prevent this problem is to make sure
+    % there is some text.
+    \putwordIndexNonexistent
+  \else
+    \catcode`\\ = 0
+    \escapechar = `\\
+    %
+    % If the index file exists but is empty, then \openin leaves \ifeof
+    % false.  We have to make TeX try to read something from the file, so
+    % it can discover if there is anything in it.
+    \read 1 to \thisline
+    \ifeof 1
+      \putwordIndexIsEmpty
+    \else
+      % Index files are almost Texinfo source, but we use \ as the escape
+      % character.  It would be better to use @, but that's too big a change
+      % to make right now.
+      \def\indexbackslash{\ttbackslash}%
+      \let\indexlbrace\{   % Likewise, set these sequences for braces
+      \let\indexrbrace\}   % used in the sort key.
+      \begindoublecolumns
+      \let\entryorphanpenalty=\indexorphanpenalty
+      %
+      % Read input from the index file line by line.
+      \loopdo
+        \ifeof1
+          \let\firsttoken\relax
+        \else
+          \read 1 to \nextline
+          \edef\act{\gdef\noexpand\firsttoken{\getfirsttoken\nextline}}%
+          \act
+        \fi
+        \thisline
+        %
+        \ifeof1\else
+        \let\thisline\nextline
+      \repeat
+      %%
+      \enddoublecolumns
+    \fi
+  \fi
+  \closein 1
+\endgroup}
+
+\def\getfirsttoken#1{\expandafter\getfirsttokenx#1\endfirsttoken}
+\long\def\getfirsttokenx#1#2\endfirsttoken{\noexpand#1}
+
+\def\loopdo#1\repeat{\def\body{#1}\loopdoxxx}
+\def\loopdoxxx{\let\next=\relax\body\let\next=\loopdoxxx\fi\next}
+
+% These macros are used by the sorted index file itself.
+% Change them to control the appearance of the index.
+
+{\catcode`\/=13 \catcode`\-=13 \catcode`\^=13 \catcode`\~=13 \catcode`\_=13
+\catcode`\|=13 \catcode`\<=13 \catcode`\>=13 \catcode`\+=13 \catcode`\"=13
+\catcode`\$=3
+\gdef\initialglyphs{%
+  % Some changes for non-alphabetic characters.  Using the glyphs from the
+  % math fonts looks more consistent than the typewriter font used elsewhere
+  % for these characters.
+  \def\indexbackslash{\math{\backslash}}%
+  \let\\=\indexbackslash
+  %
+  % Can't get bold backslash so don't use bold forward slash
+  \catcode`\/=13
+  \def/{{\secrmnotbold \normalslash}}%
+  \def-{{\normaldash\normaldash}}% en dash `--'
+  \def^{{\chapbf \normalcaret}}%
+  \def~{{\chapbf \normaltilde}}%
+  \def\_{%
+     \leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em }%
+  \def|{$\vert$}%
+  \def<{$\less$}%
+  \def>{$\gtr$}%
+  \def+{$\normalplus$}%
+}}
+
+\def\initial{%
+  \bgroup
+  \initialglyphs
+  \initialx
+}
+
+\def\initialx#1{%
+  % Remove any glue we may have, we'll be inserting our own.
+  \removelastskip
+  %
+  % We like breaks before the index initials, so insert a bonus.
+  % The glue before the bonus allows a little bit of space at the
+  % bottom of a column to reduce an increase in inter-line spacing.
+  \nobreak
+  \vskip 0pt plus 5\baselineskip
+  \penalty -300 
+  \vskip 0pt plus -5\baselineskip
+  %
+  % Typeset the initial.  Making this add up to a whole number of
+  % baselineskips increases the chance of the dots lining up from column
+  % to column.  It still won't often be perfect, because of the stretch
+  % we need before each entry, but it's better.
+  %
+  % No shrink because it confuses \balancecolumns.
+  \vskip 1.67\baselineskip plus 1\baselineskip
+  \leftline{\secfonts \kern-0.05em \secbf #1}%
+  % \secfonts is inside the argument of \leftline so that the change of
+  % \baselineskip will not affect any glue inserted before the vbox that
+  % \leftline creates.
+  % Do our best not to break after the initial.
+  \nobreak
+  \vskip .33\baselineskip plus .1\baselineskip
+  \egroup % \initialglyphs
+}
+
+\newdimen\entryrightmargin
+\entryrightmargin=0pt
+
+% \entry typesets a paragraph consisting of the text (#1), dot leaders, and
+% then page number (#2) flushed to the right margin.  It is used for index
+% and table of contents entries.  The paragraph is indented by \leftskip.
+%
+\def\entry{%
+  \begingroup
+    %
+    % Start a new paragraph if necessary, so our assignments below can't
+    % affect previous text.
+    \par
+    %
+    % No extra space above this paragraph.
+    \parskip = 0in
+    %
+    % When reading the text of entry, convert explicit line breaks
+    % from @* into spaces.  The user might give these in long section
+    % titles, for instance.
+    \def\*{\unskip\space\ignorespaces}%
+    \def\entrybreak{\hfil\break}% An undocumented command
+    %
+    % A bit of stretch before each entry for the benefit of balancing
+    % columns.
+    \vskip 0pt plus0.5pt
+    %
+    % Swallow the left brace of the text (first parameter):
+    \afterassignment\doentry
+    \let\temp =
+}
+\def\entrybreak{\unskip\space\ignorespaces}%
+\def\doentry{%
+    % Save the text of the entry
+    \global\setbox\boxA=\hbox\bgroup
+    \bgroup % Instead of the swallowed brace.
+      \noindent
+      \aftergroup\finishentry
+      % And now comes the text of the entry.
+      % Not absorbing as a macro argument reduces the chance of problems
+      % with catcodes occurring.
+}
+{\catcode`\@=11
+\gdef\finishentry#1{%
+    \egroup % end box A
+    \dimen@ = \wd\boxA % Length of text of entry
+    \global\setbox\boxA=\hbox\bgroup\unhbox\boxA
+    % #1 is the page number.
+    %
+    % Get the width of the page numbers, and only use
+    % leaders if they are present.
+    \global\setbox\boxB = \hbox{#1}%
+    \ifdim\wd\boxB = 0pt
+      \null\nobreak\hfill\ %
+    \else
+      %
+      \null\nobreak\indexdotfill % Have leaders before the page number.
+      %
+      \ifpdf
+        \pdfgettoks#1.%
+        \hskip\skip\thinshrinkable\the\toksA
+      \else
+        \hskip\skip\thinshrinkable #1%
+      \fi
+    \fi
+    \egroup % end \boxA
+    \ifdim\wd\boxB = 0pt
+      \global\setbox\entryindexbox=\box\boxA
+    \else
+    \global\setbox\entryindexbox=\vbox\bgroup\noindent
+      % We want the text of the entries to be aligned to the left, and the
+      % page numbers to be aligned to the right.
+      %
+      \advance\leftskip by 0pt plus 1fil
+      \advance\leftskip by 0pt plus -1fill
+      \rightskip = 0pt plus -1fil
+      \advance\rightskip by 0pt plus 1fill
+      % Cause last line, which could consist of page numbers on their own
+      % if the list of page numbers is long, to be aligned to the right.
+      \parfillskip=0pt plus -1fill
+      %
+      \hangindent=1em
+      %
+      \advance\rightskip by \entryrightmargin
+      % Determine how far we can stretch into the margin.
+      % This allows, e.g., "Appendix H  GNU Free Documentation License" to
+      % fit on one line in @letterpaper format.
+      \ifdim\entryrightmargin>2.1em
+        \dimen@i=2.1em
+      \else
+        \dimen@i=0em
+      \fi
+      \advance \parfillskip by 0pt minus 1\dimen@i
+      %
+      \dimen@ii = \hsize
+      \advance\dimen@ii by -1\leftskip
+      \advance\dimen@ii by -1\entryrightmargin
+      \advance\dimen@ii by 1\dimen@i
+      \let\maybestrut=\relax
+      \ifdim\wd\boxA > \dimen@ii % If the entry doesn't fit in one line
+        \let\maybestrut=\strut
+      \ifdim\dimen@ > 0.8\dimen@ii   % due to long index text
+        \dimen@ = 0.7\dimen@ % Try to split the text roughly evenly
+        \dimen@ii = \hsize
+        \advance \dimen@ii by -1em
+        \ifnum\dimen@>\dimen@ii
+          % If the entry is too long, use the whole line
+          \dimen@ = \dimen@ii
+        \fi
+        \advance\leftskip by 0pt plus 1fill % ragged right
+        \advance \dimen@ by 1\rightskip
+        \parshape = 2 0pt \dimen@ 1em \dimen@ii
+        % Ideally we'd add a finite glue at the end of the first line only, but
+        % TeX doesn't seem to provide a way to do such a thing.
+      \fi\fi
+      \maybestrut  % Add a strut on the first and last lines
+      \unhbox\boxA
+      \maybestrut
+      %
+      % Do not prefer a separate line ending with a hyphen to fewer lines.
+      \finalhyphendemerits = 0
+      %
+      % Word spacing - no stretch
+      \spaceskip=\fontdimen2\font minus \fontdimen4\font
+      %
+      \linepenalty=1000  % Discourage line breaks.
+      \hyphenpenalty=5000  % Discourage hyphenation.
+      %
+      \par % format the paragraph
+    \egroup % The \vbox
+    \fi
+  \endgroup
+  % delay text of entry until after penalty
+  \bgroup\aftergroup\insertindexentrybox
+  \entryorphanpenalty
+}}
+
+\newskip\thinshrinkable
+\skip\thinshrinkable=.15em minus .15em
+
+\newbox\entryindexbox
+\def\insertindexentrybox{%
+\lineskip=0pt    % This comes into effect when the \vbox has a large 
+                 % height due to the paragraph in it having several 
+                 % lines.
+\box\entryindexbox}
+
+% Default is no penalty
+\let\entryorphanpenalty\egroup
+
+% Used from \printindex.  \firsttoken should be the first token
+% after the \entry.  If it's not another \entry, we are at the last
+% line of a group of index entries, so insert a penalty to discourage
+% orphaned index entries.
+\long\def\indexorphanpenalty{%
+  \def\isentry{\entry}%
+  \ifx\firsttoken\isentry
+  \else
+    \unskip\penalty 9000
+    % The \unskip here stops breaking before the glue.  It relies on the
+    % \vskip above being there, otherwise there is an error
+    % "You can't use `\unskip' in vertical mode".  There has to be glue
+    % in the current vertical list that hasn't been added to the
+    % "current page".  See Chapter 24 of the TeXbook.  This contradicts
+    % Section 8.3.7 in "TeX by Topic," though.
+  \fi
+  \egroup % now comes the box added with \aftergroup
+}
+
+% Like plain.tex's \dotfill, except uses up at least 1 em.
+% The filll stretch here overpowers both the fil and fill stretch to push
+% the page number to the right.
+\def\indexdotfill{\cleaders
+  \hbox{$\mathsurround=0pt \mkern1.5mu.\mkern1.5mu$}\hskip 1em plus 1filll}
+
+
+\def\primary #1{\line{#1\hfil}}
+
+\newskip\secondaryindent \secondaryindent=0.5cm
+\def\secondary#1#2{{%
+  \parfillskip=0in
+  \parskip=0in
+  \hangindent=1in
+  \hangafter=1
+  \noindent\hskip\secondaryindent\hbox{#1}\indexdotfill
+  \ifpdf
+    \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
+  \else
+    #2
+  \fi
+  \par
+}}
+
+% Define two-column mode, which we use to typeset indexes.
+% Adapted from the TeXbook, page 416, which is to say,
+% the manmac.tex format used to print the TeXbook itself.
+\catcode`\@=11
+
+\newbox\partialpage
+\newdimen\doublecolumnhsize
+\newdimen\doublecolumntopgap
+\doublecolumntopgap = 0pt
+
+\newtoks\savedtopmark % Used in \begindoublecolumns
+\newtoks\savedfirstmark
+
+\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
+  % Grab any single-column material above us.
+  \output = {%
+    %
+    % Here is a possibility not foreseen in manmac: if we accumulate a
+    % whole lot of material, we might end up calling this \output
+    % routine twice in a row (see the doublecol-lose test, which is
+    % essentially a couple of indexes with @setchapternewpage off).  In
+    % that case we just ship out what is in \partialpage with the normal
+    % output routine.  Generally, \partialpage will be empty when this
+    % runs and this will be a no-op.  See the indexspread.tex test case.
+    \ifvoid\partialpage \else
+      \onepageout{\pagecontents\partialpage}%
+    \fi
+    %
+    \global\setbox\partialpage = \vbox{%
+      % Unvbox the main output page.
+      \unvbox\PAGE
+      \kern-\topskip \kern\baselineskip
+    }%
+    % Save \topmark and \firstmark
+    \global\savedtopmark=\expandafter{\topmark}%
+    \global\savedfirstmark=\expandafter{\firstmark}%
+  }%
+  \eject % run that output routine to set \partialpage
+  %
+  % We recover the two marks that the last output routine saved in order
+  % to propagate the information in marks added around a chapter heading,
+  % which could be otherwise be lost by the time the final page is output.
+  %
+  \mark{\the\savedtopmark}% Only mark in page passed to following \output.
+  \output = {%
+    \setbox0=\box\PAGE % clear box 255
+  }abc\eject
+  %
+  \mark{\the\savedfirstmark}%
+  %
+  % Use the double-column output routine for subsequent pages.
+  \output = {\doublecolumnout}%
+  %
+  % Change the page size parameters.  We could do this once outside this
+  % routine, in each of @smallbook, @afourpaper, and the default 8.5x11
+  % format, but then we repeat the same computation.  Repeating a couple
+  % of assignments once per index is clearly meaningless for the
+  % execution time, so we may as well do it in one place.
+  %
+  % First we halve the line length, less a little for the gutter between
+  % the columns.  We compute the gutter based on the line length, so it
+  % changes automatically with the paper format.  The magic constant
+  % below is chosen so that the gutter has the same value (well, +-<1pt)
+  % as it did when we hard-coded it.
+  %
+  % We put the result in a separate register, \doublecolumhsize, so we
+  % can restore it in \pagesofar, after \hsize itself has (potentially)
+  % been clobbered.
+  %
+  \doublecolumnhsize = \hsize
+    \advance\doublecolumnhsize by -.04154\hsize
+    \divide\doublecolumnhsize by 2
+  \hsize = \doublecolumnhsize
+  %
+  % Double the \vsize as well.  (We don't need a separate register here,
+  % since nobody clobbers \vsize.)
+  \global\doublecolumntopgap = \topskip
+  \global\advance\doublecolumntopgap by -1\baselineskip
+  \global\advance\vsize by -1\doublecolumntopgap
+  \vsize = 2\vsize
+  \topskip=0pt
+}
+
+% The double-column output routine for all double-column pages except
+% the last, which is done by \balancecolumns.
+%
+\def\doublecolumnout{%
+  \splittopskip=\topskip \splitmaxdepth=\maxdepth
+  % Get the available space for the double columns -- the normal
+  % (undoubled) page height minus any material left over from the
+  % previous page.
+  \dimen@ = \vsize
+  \divide\dimen@ by 2
+  \advance\dimen@ by -\ht\partialpage
+  %
+  % box0 will be the left-hand column, box2 the right.
+  \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
+  \onepageout\pagesofar
+  \unvbox255
+  \penalty\outputpenalty
+}
+%
+% Re-output the contents of the output page -- any previous material,
+% followed by the two boxes we just split, in box0 and box2.
+\def\pagesofar{%
+  \unvbox\partialpage
+  %
+  \hsize = \doublecolumnhsize
+  \wd0=\hsize \wd2=\hsize
+  \vbox{%
+    \vskip\doublecolumntopgap
+    \hbox to\pagewidth{\box0\hfil\box2}}%
+}
+
+
+% Finished with with double columns.
+\def\enddoublecolumns{%
+  % The following penalty ensures that the page builder is exercised
+  % _before_ we change the output routine.  This is necessary in the
+  % following situation:
+  %
+  % The last section of the index consists only of a single entry.
+  % Before this section, \pagetotal is less than \pagegoal, so no
+  % break occurs before the last section starts.  However, the last
+  % section, consisting of \initial and the single \entry, does not
+  % fit on the page and has to be broken off.  Without the following
+  % penalty the page builder will not be exercised until \eject
+  % below, and by that time we'll already have changed the output
+  % routine to the \balancecolumns version, so the next-to-last
+  % double-column page will be processed with \balancecolumns, which
+  % is wrong:  The two columns will go to the main vertical list, with
+  % the broken-off section in the recent contributions.  As soon as
+  % the output routine finishes, TeX starts reconsidering the page
+  % break.  The two columns and the broken-off section both fit on the
+  % page, because the two columns now take up only half of the page
+  % goal.  When TeX sees \eject from below which follows the final
+  % section, it invokes the new output routine that we've set after
+  % \balancecolumns below; \onepageout will try to fit the two columns
+  % and the final section into the vbox of \pageheight (see
+  % \pagebody), causing an overfull box.
+  %
+  % Note that glue won't work here, because glue does not exercise the
+  % page builder, unlike penalties (see The TeXbook, pp. 280-281).
+  \penalty0
+  %
+  \output = {%
+    % Split the last of the double-column material.  Leave it on the
+    % current page, no automatic page break.
+    \balancecolumns
+    %
+    % If we end up splitting too much material for the current page,
+    % though, there will be another page break right after this \output
+    % invocation ends.  Having called \balancecolumns once, we do not
+    % want to call it again.  Therefore, reset \output to its normal
+    % definition right away.  (We hope \balancecolumns will never be
+    % called on to balance too much material, but if it is, this makes
+    % the output somewhat more palatable.)
+    \global\output = {\onepageout{\pagecontents\PAGE}}%
+  }%
+  \eject
+  \endgroup % started in \begindoublecolumns
+  %
+  % \pagegoal was set to the doubled \vsize above, since we restarted
+  % the current page.  We're now back to normal single-column
+  % typesetting, so reset \pagegoal to the normal \vsize (after the
+  % \endgroup where \vsize got restored).
+  \pagegoal = \vsize
+}
+%
+% Only called for the last of the double column material.  \doublecolumnout 
+% does the others.
+\def\balancecolumns{%
+  \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120.
+  \dimen@ = \ht0
+  \advance\dimen@ by \topskip
+  \advance\dimen@ by-\baselineskip
+  \ifdim\dimen@<14\baselineskip
+    % Don't split a short final column in two.
+    \setbox2=\vbox{}%
+  \else
+    \divide\dimen@ by 2 % target to split to
+    \dimen@ii = \dimen@
+    \splittopskip = \topskip
+    % Loop until the second column is no higher than the first
+    {%
+      \vbadness = 10000
+      \loop
+        \global\setbox3 = \copy0
+        \global\setbox1 = \vsplit3 to \dimen@
+        % Remove glue from bottom of first column to
+        % make sure it is higher than the second.
+        \global\setbox1 = \vbox{\unvbox1\unpenalty\unskip}%
+      \ifdim\ht3>\ht1
+        \global\advance\dimen@ by 1pt
+      \repeat
+    }%
+    \multiply\dimen@ii by 4
+    \divide\dimen@ii by 5
+    \ifdim\ht3<\dimen@ii
+      % Column heights are too different, so don't make their bottoms
+      % flush with each other.  The glue at the end of the second column
+      % allows a second column to stretch, reducing the difference in
+      % height between the two.
+      \setbox0=\vbox to\dimen@{\unvbox1\vfill}%
+      \setbox2=\vbox to\dimen@{\unvbox3\vskip 0pt plus 0.3\ht0}%
+    \else
+      \setbox0=\vbox to\dimen@{\unvbox1}%
+      \setbox2=\vbox to\dimen@{\unvbox3}%
+    \fi
+  \fi
+  %
+  \pagesofar
+}
+\catcode`\@ = \other
+
+
+\message{sectioning,}
+% Chapters, sections, etc.
+
+% Let's start with @part.
+\outer\parseargdef\part{\partzzz{#1}}
+\def\partzzz#1{%
+  \chapoddpage
+  \null
+  \vskip.3\vsize  % move it down on the page a bit
+  \begingroup
+    \noindent \titlefonts\rmisbold #1\par % the text
+    \let\lastnode=\empty      % no node to associate with
+    \writetocentry{part}{#1}{}% but put it in the toc
+    \headingsoff              % no headline or footline on the part page
+    % This outputs a mark at the end of the page that clears \thischapter
+    % and \thissection, as is done in \startcontents.
+    \let\pchapsepmacro\relax
+    \chapmacro{}{Yomitfromtoc}{}%
+    \chapoddpage
+  \endgroup
+}
+
+% \unnumberedno is an oxymoron.  But we count the unnumbered
+% sections so that we can refer to them unambiguously in the pdf
+% outlines by their "section number".  We avoid collisions with chapter
+% numbers by starting them at 10000.  (If a document ever has 10000
+% chapters, we're in trouble anyway, I'm sure.)
+\newcount\unnumberedno \unnumberedno = 10000
+\newcount\chapno
+\newcount\secno        \secno=0
+\newcount\subsecno     \subsecno=0
+\newcount\subsubsecno  \subsubsecno=0
+
+% This counter is funny since it counts through charcodes of letters A, B, ...
+\newcount\appendixno  \appendixno = `\@
+%
+% \def\appendixletter{\char\the\appendixno}
+% We do the following ugly conditional instead of the above simple
+% construct for the sake of pdftex, which needs the actual
+% letter in the expansion, not just typeset.
+%
+\def\appendixletter{%
+  \ifnum\appendixno=`A A%
+  \else\ifnum\appendixno=`B B%
+  \else\ifnum\appendixno=`C C%
+  \else\ifnum\appendixno=`D D%
+  \else\ifnum\appendixno=`E E%
+  \else\ifnum\appendixno=`F F%
+  \else\ifnum\appendixno=`G G%
+  \else\ifnum\appendixno=`H H%
+  \else\ifnum\appendixno=`I I%
+  \else\ifnum\appendixno=`J J%
+  \else\ifnum\appendixno=`K K%
+  \else\ifnum\appendixno=`L L%
+  \else\ifnum\appendixno=`M M%
+  \else\ifnum\appendixno=`N N%
+  \else\ifnum\appendixno=`O O%
+  \else\ifnum\appendixno=`P P%
+  \else\ifnum\appendixno=`Q Q%
+  \else\ifnum\appendixno=`R R%
+  \else\ifnum\appendixno=`S S%
+  \else\ifnum\appendixno=`T T%
+  \else\ifnum\appendixno=`U U%
+  \else\ifnum\appendixno=`V V%
+  \else\ifnum\appendixno=`W W%
+  \else\ifnum\appendixno=`X X%
+  \else\ifnum\appendixno=`Y Y%
+  \else\ifnum\appendixno=`Z Z%
+  % The \the is necessary, despite appearances, because \appendixletter is
+  % expanded while writing the .toc file.  \char\appendixno is not
+  % expandable, thus it is written literally, thus all appendixes come out
+  % with the same letter (or @) in the toc without it.
+  \else\char\the\appendixno
+  \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
+  \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
+
+% Each @chapter defines these (using marks) as the number+name, number
+% and name of the chapter.  Page headings and footings can use
+% these.  @section does likewise.
+\def\thischapter{}
+\def\thischapternum{}
+\def\thischaptername{}
+\def\thissection{}
+\def\thissectionnum{}
+\def\thissectionname{}
+
+\newcount\absseclevel % used to calculate proper heading level
+\newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count
+
+% @raisesections: treat @section as chapter, @subsection as section, etc.
+\def\raisesections{\global\advance\secbase by -1}
+\let\up=\raisesections % original BFox name
+
+% @lowersections: treat @chapter as section, @section as subsection, etc.
+\def\lowersections{\global\advance\secbase by 1}
+\let\down=\lowersections % original BFox name
+
+% we only have subsub.
+\chardef\maxseclevel = 3
+%
+% A numbered section within an unnumbered changes to unnumbered too.
+% To achieve this, remember the "biggest" unnum. sec. we are currently in:
+\chardef\unnlevel = \maxseclevel
+%
+% Trace whether the current chapter is an appendix or not:
+% \chapheadtype is "N" or "A", unnumbered chapters are ignored.
+\def\chapheadtype{N}
+
+% Choose a heading macro
+% #1 is heading type
+% #2 is heading level
+% #3 is text for heading
+\def\genhead#1#2#3{%
+  % Compute the abs. sec. level:
+  \absseclevel=#2
+  \advance\absseclevel by \secbase
+  % Make sure \absseclevel doesn't fall outside the range:
+  \ifnum \absseclevel < 0
+    \absseclevel = 0
+  \else
+    \ifnum \absseclevel > 3
+      \absseclevel = 3
+    \fi
+  \fi
+  % The heading type:
+  \def\headtype{#1}%
+  \if \headtype U%
+    \ifnum \absseclevel < \unnlevel
+      \chardef\unnlevel = \absseclevel
+    \fi
+  \else
+    % Check for appendix sections:
+    \ifnum \absseclevel = 0
+      \edef\chapheadtype{\headtype}%
+    \else
+      \if \headtype A\if \chapheadtype N%
+	\errmessage{@appendix... within a non-appendix chapter}%
+      \fi\fi
+    \fi
+    % Check for numbered within unnumbered:
+    \ifnum \absseclevel > \unnlevel
+      \def\headtype{U}%
+    \else
+      \chardef\unnlevel = 3
+    \fi
+  \fi
+  % Now print the heading:
+  \if \headtype U%
+    \ifcase\absseclevel
+	\unnumberedzzz{#3}%
+    \or \unnumberedseczzz{#3}%
+    \or \unnumberedsubseczzz{#3}%
+    \or \unnumberedsubsubseczzz{#3}%
+    \fi
+  \else
+    \if \headtype A%
+      \ifcase\absseclevel
+	  \appendixzzz{#3}%
+      \or \appendixsectionzzz{#3}%
+      \or \appendixsubseczzz{#3}%
+      \or \appendixsubsubseczzz{#3}%
+      \fi
+    \else
+      \ifcase\absseclevel
+	  \chapterzzz{#3}%
+      \or \seczzz{#3}%
+      \or \numberedsubseczzz{#3}%
+      \or \numberedsubsubseczzz{#3}%
+      \fi
+    \fi
+  \fi
+  \suppressfirstparagraphindent
+}
+
+% an interface:
+\def\numhead{\genhead N}
+\def\apphead{\genhead A}
+\def\unnmhead{\genhead U}
+
+% @chapter, @appendix, @unnumbered.  Increment top-level counter, reset
+% all lower-level sectioning counters to zero.
+%
+% Also set \chaplevelprefix, which we prepend to @float sequence numbers
+% (e.g., figures), q.v.  By default (before any chapter), that is empty.
+\let\chaplevelprefix = \empty
+%
+\outer\parseargdef\chapter{\numhead0{#1}} % normally numhead0 calls chapterzzz
+\def\chapterzzz#1{%
+  % section resetting is \global in case the chapter is in a group, such
+  % as an @include file.
+  \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+    \global\advance\chapno by 1
+  %
+  % Used for \float.
+  \gdef\chaplevelprefix{\the\chapno.}%
+  \resetallfloatnos
+  %
+  % \putwordChapter can contain complex things in translations.
+  \toks0=\expandafter{\putwordChapter}%
+  \message{\the\toks0 \space \the\chapno}%
+  %
+  % Write the actual heading.
+  \chapmacro{#1}{Ynumbered}{\the\chapno}%
+  %
+  % So @section and the like are numbered underneath this chapter.
+  \global\let\section = \numberedsec
+  \global\let\subsection = \numberedsubsec
+  \global\let\subsubsection = \numberedsubsubsec
+}
+
+\outer\parseargdef\appendix{\apphead0{#1}} % normally calls appendixzzz
+%
+\def\appendixzzz#1{%
+  \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+    \global\advance\appendixno by 1
+  \gdef\chaplevelprefix{\appendixletter.}%
+  \resetallfloatnos
+  %
+  % \putwordAppendix can contain complex things in translations.
+  \toks0=\expandafter{\putwordAppendix}%
+  \message{\the\toks0 \space \appendixletter}%
+  %
+  \chapmacro{#1}{Yappendix}{\appendixletter}%
+  %
+  \global\let\section = \appendixsec
+  \global\let\subsection = \appendixsubsec
+  \global\let\subsubsection = \appendixsubsubsec
+}
+
+% normally unnmhead0 calls unnumberedzzz:
+\outer\parseargdef\unnumbered{\unnmhead0{#1}}
+\def\unnumberedzzz#1{%
+  \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+    \global\advance\unnumberedno by 1
+  %
+  % Since an unnumbered has no number, no prefix for figures.
+  \global\let\chaplevelprefix = \empty
+  \resetallfloatnos
+  %
+  % This used to be simply \message{#1}, but TeX fully expands the
+  % argument to \message.  Therefore, if #1 contained @-commands, TeX
+  % expanded them.  For example, in `@unnumbered The @cite{Book}', TeX
+  % expanded @cite (which turns out to cause errors because \cite is meant
+  % to be executed, not expanded).
+  %
+  % Anyway, we don't want the fully-expanded definition of @cite to appear
+  % as a result of the \message, we just want `@cite' itself.  We use
+  % \the<toks register> to achieve this: TeX expands \the<toks> only once,
+  % simply yielding the contents of <toks register>.  (We also do this for
+  % the toc entries.)
+  \toks0 = {#1}%
+  \message{(\the\toks0)}%
+  %
+  \chapmacro{#1}{Ynothing}{\the\unnumberedno}%
+  %
+  \global\let\section = \unnumberedsec
+  \global\let\subsection = \unnumberedsubsec
+  \global\let\subsubsection = \unnumberedsubsubsec
+}
+
+% @centerchap is like @unnumbered, but the heading is centered.
+\outer\parseargdef\centerchap{%
+  \let\centerparametersmaybe = \centerparameters
+  \unnmhead0{#1}%
+  \let\centerparametersmaybe = \relax
+}
+
+% @top is like @unnumbered.
+\let\top\unnumbered
+
+% Sections.
+% 
+\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz
+\def\seczzz#1{%
+  \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
+  \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}%
+}
+
+% normally calls appendixsectionzzz:
+\outer\parseargdef\appendixsection{\apphead1{#1}}
+\def\appendixsectionzzz#1{%
+  \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
+  \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}%
+}
+\let\appendixsec\appendixsection
+
+% normally calls unnumberedseczzz:
+\outer\parseargdef\unnumberedsec{\unnmhead1{#1}}
+\def\unnumberedseczzz#1{%
+  \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
+  \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}%
+}
+
+% Subsections.
+% 
+% normally calls numberedsubseczzz:
+\outer\parseargdef\numberedsubsec{\numhead2{#1}}
+\def\numberedsubseczzz#1{%
+  \global\subsubsecno=0  \global\advance\subsecno by 1
+  \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}%
+}
+
+% normally calls appendixsubseczzz:
+\outer\parseargdef\appendixsubsec{\apphead2{#1}}
+\def\appendixsubseczzz#1{%
+  \global\subsubsecno=0  \global\advance\subsecno by 1
+  \sectionheading{#1}{subsec}{Yappendix}%
+                 {\appendixletter.\the\secno.\the\subsecno}%
+}
+
+% normally calls unnumberedsubseczzz:
+\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}}
+\def\unnumberedsubseczzz#1{%
+  \global\subsubsecno=0  \global\advance\subsecno by 1
+  \sectionheading{#1}{subsec}{Ynothing}%
+                 {\the\unnumberedno.\the\secno.\the\subsecno}%
+}
+
+% Subsubsections.
+% 
+% normally numberedsubsubseczzz:
+\outer\parseargdef\numberedsubsubsec{\numhead3{#1}}
+\def\numberedsubsubseczzz#1{%
+  \global\advance\subsubsecno by 1
+  \sectionheading{#1}{subsubsec}{Ynumbered}%
+                 {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}%
+}
+
+% normally appendixsubsubseczzz:
+\outer\parseargdef\appendixsubsubsec{\apphead3{#1}}
+\def\appendixsubsubseczzz#1{%
+  \global\advance\subsubsecno by 1
+  \sectionheading{#1}{subsubsec}{Yappendix}%
+                 {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}%
+}
+
+% normally unnumberedsubsubseczzz:
+\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}}
+\def\unnumberedsubsubseczzz#1{%
+  \global\advance\subsubsecno by 1
+  \sectionheading{#1}{subsubsec}{Ynothing}%
+                 {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}%
+}
+
+% These macros control what the section commands do, according
+% to what kind of chapter we are in (ordinary, appendix, or unnumbered).
+% Define them by default for a numbered chapter.
+\let\section = \numberedsec
+\let\subsection = \numberedsubsec
+\let\subsubsection = \numberedsubsubsec
+
+% Define @majorheading, @heading and @subheading
+
+\def\majorheading{%
+  {\advance\chapheadingskip by 10pt \chapbreak }%
+  \parsearg\chapheadingzzz
+}
+
+\def\chapheading{\chapbreak \parsearg\chapheadingzzz}
+\def\chapheadingzzz#1{%
+  \vbox{\chapfonts \raggedtitlesettings #1\par}%
+  \nobreak\bigskip \nobreak
+  \suppressfirstparagraphindent
+}
+
+% @heading, @subheading, @subsubheading.
+\parseargdef\heading{\sectionheading{#1}{sec}{Yomitfromtoc}{}
+  \suppressfirstparagraphindent}
+\parseargdef\subheading{\sectionheading{#1}{subsec}{Yomitfromtoc}{}
+  \suppressfirstparagraphindent}
+\parseargdef\subsubheading{\sectionheading{#1}{subsubsec}{Yomitfromtoc}{}
+  \suppressfirstparagraphindent}
+
+% These macros generate a chapter, section, etc. heading only
+% (including whitespace, linebreaking, etc. around it),
+% given all the information in convenient, parsed form.
+
+% Args are the skip and penalty (usually negative)
+\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
+
+% Parameter controlling skip before chapter headings (if needed)
+\newskip\chapheadingskip
+
+% Define plain chapter starts, and page on/off switching for it.
+\def\chapbreak{\dobreak \chapheadingskip {-4000}}
+
+% Start a new page
+\def\chappager{\par\vfill\supereject}
+
+% \chapoddpage - start on an odd page for a new chapter
+% Because \domark is called before \chapoddpage, the filler page will
+% get the headings for the next chapter, which is wrong.  But we don't
+% care -- we just disable all headings on the filler page.
+\def\chapoddpage{%
+  \chappager
+  \ifodd\pageno \else
+    \begingroup
+      \headingsoff
+      \null
+      \chappager
+    \endgroup
+  \fi
+}
+
+\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
+
+\def\CHAPPAGoff{%
+\global\let\contentsalignmacro = \chappager
+\global\let\pchapsepmacro=\chapbreak
+\global\let\pagealignmacro=\chappager}
+
+\def\CHAPPAGon{%
+\global\let\contentsalignmacro = \chappager
+\global\let\pchapsepmacro=\chappager
+\global\let\pagealignmacro=\chappager
+\global\def\HEADINGSon{\HEADINGSsingle}}
+
+\def\CHAPPAGodd{%
+\global\let\contentsalignmacro = \chapoddpage
+\global\let\pchapsepmacro=\chapoddpage
+\global\let\pagealignmacro=\chapoddpage
+\global\def\HEADINGSon{\HEADINGSdouble}}
+
+\CHAPPAGon
+
+% \chapmacro - Chapter opening.
+%
+% #1 is the text, #2 is the section type (Ynumbered, Ynothing,
+% Yappendix, Yomitfromtoc), #3 the chapter number.
+% Not used for @heading series.
+%
+% To test against our argument.
+\def\Ynothingkeyword{Ynothing}
+\def\Yappendixkeyword{Yappendix}
+\def\Yomitfromtockeyword{Yomitfromtoc}
+%
+\def\chapmacro#1#2#3{%
+  \checkenv{}% chapters, etc., should not start inside an environment.
+  %
+  % Insert the first mark before the heading break (see notes for \domark).
+  \let\prevchapterdefs=\lastchapterdefs
+  \let\prevsectiondefs=\lastsectiondefs
+  \gdef\lastsectiondefs{\gdef\thissectionname{}\gdef\thissectionnum{}%
+                        \gdef\thissection{}}%
+  %
+  \def\temptype{#2}%
+  \ifx\temptype\Ynothingkeyword
+    \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}%
+                          \gdef\thischapter{\thischaptername}}%
+  \else\ifx\temptype\Yomitfromtockeyword
+    \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}%
+                          \gdef\thischapter{}}%
+  \else\ifx\temptype\Yappendixkeyword
+    \toks0={#1}%
+    \xdef\lastchapterdefs{%
+      \gdef\noexpand\thischaptername{\the\toks0}%
+      \gdef\noexpand\thischapternum{\appendixletter}%
+      % \noexpand\putwordAppendix avoids expanding indigestible
+      % commands in some of the translations.
+      \gdef\noexpand\thischapter{\noexpand\putwordAppendix{}
+                                 \noexpand\thischapternum:
+                                 \noexpand\thischaptername}%
+    }%
+  \else
+    \toks0={#1}%
+    \xdef\lastchapterdefs{%
+      \gdef\noexpand\thischaptername{\the\toks0}%
+      \gdef\noexpand\thischapternum{\the\chapno}%
+      % \noexpand\putwordChapter avoids expanding indigestible
+      % commands in some of the translations.
+      \gdef\noexpand\thischapter{\noexpand\putwordChapter{}
+                                 \noexpand\thischapternum:
+                                 \noexpand\thischaptername}%
+    }%
+  \fi\fi\fi
+  %
+  % Output the mark.  Pass it through \safewhatsit, to take care of
+  % the preceding space.
+  \safewhatsit\domark
+  %
+  % Insert the chapter heading break.
+  \pchapsepmacro
+  %
+  % Now the second mark, after the heading break.  No break points
+  % between here and the heading.
+  \let\prevchapterdefs=\lastchapterdefs
+  \let\prevsectiondefs=\lastsectiondefs
+  \domark
+  %
+  {%
+    \chapfonts \rmisbold
+    \let\footnote=\errfootnoteheading % give better error message
+    %
+    % Have to define \lastsection before calling \donoderef, because the
+    % xref code eventually uses it.  On the other hand, it has to be called
+    % after \pchapsepmacro, or the headline will change too soon.
+    \gdef\lastsection{#1}%
+    %
+    % Only insert the separating space if we have a chapter/appendix
+    % number, and don't print the unnumbered ``number''.
+    \ifx\temptype\Ynothingkeyword
+      \setbox0 = \hbox{}%
+      \def\toctype{unnchap}%
+    \else\ifx\temptype\Yomitfromtockeyword
+      \setbox0 = \hbox{}% contents like unnumbered, but no toc entry
+      \def\toctype{omit}%
+    \else\ifx\temptype\Yappendixkeyword
+      \setbox0 = \hbox{\putwordAppendix{} #3\enspace}%
+      \def\toctype{app}%
+    \else
+      \setbox0 = \hbox{#3\enspace}%
+      \def\toctype{numchap}%
+    \fi\fi\fi
+    %
+    % Write the toc entry for this chapter.  Must come before the
+    % \donoderef, because we include the current node name in the toc
+    % entry, and \donoderef resets it to empty.
+    \writetocentry{\toctype}{#1}{#3}%
+    %
+    % For pdftex, we have to write out the node definition (aka, make
+    % the pdfdest) after any page break, but before the actual text has
+    % been typeset.  If the destination for the pdf outline is after the
+    % text, then jumping from the outline may wind up with the text not
+    % being visible, for instance under high magnification.
+    \donoderef{#2}%
+    %
+    % Typeset the actual heading.
+    \nobreak % Avoid page breaks at the interline glue.
+    \vbox{\raggedtitlesettings \hangindent=\wd0 \centerparametersmaybe
+          \unhbox0 #1\par}%
+  }%
+  \nobreak\bigskip % no page break after a chapter title
+  \nobreak
+}
+
+% @centerchap -- centered and unnumbered.
+\let\centerparametersmaybe = \relax
+\def\centerparameters{%
+  \advance\rightskip by 3\rightskip
+  \leftskip = \rightskip
+  \parfillskip = 0pt
+}
+
+
+% I don't think this chapter style is supported any more, so I'm not
+% updating it with the new noderef stuff.  We'll see.  --karl, 11aug03.
+%
+\def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
+%
+\def\unnchfopen #1{%
+  \chapoddpage
+  \vbox{\chapfonts \raggedtitlesettings #1\par}%
+  \nobreak\bigskip\nobreak
+}
+\def\chfopen #1#2{\chapoddpage {\chapfonts
+\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
+\par\penalty 5000 %
+}
+\def\centerchfopen #1{%
+  \chapoddpage
+  \vbox{\chapfonts \raggedtitlesettings \hfill #1\hfill}%
+  \nobreak\bigskip \nobreak
+}
+\def\CHAPFopen{%
+  \global\let\chapmacro=\chfopen
+  \global\let\centerchapmacro=\centerchfopen}
+
+
+% Section titles.  These macros combine the section number parts and
+% call the generic \sectionheading to do the printing.
+%
+\newskip\secheadingskip
+\def\secheadingbreak{\dobreak \secheadingskip{-1000}}
+
+% Subsection titles.
+\newskip\subsecheadingskip
+\def\subsecheadingbreak{\dobreak \subsecheadingskip{-500}}
+
+% Subsubsection titles.
+\def\subsubsecheadingskip{\subsecheadingskip}
+\def\subsubsecheadingbreak{\subsecheadingbreak}
+
+
+% Print any size, any type, section title.
+%
+% #1 is the text of the title,
+% #2 is the section level (sec/subsec/subsubsec),
+% #3 is the section type (Ynumbered, Ynothing, Yappendix, Yomitfromtoc),
+% #4 is the section number.
+%
+\def\seckeyword{sec}
+%
+\def\sectionheading#1#2#3#4{%
+  {%
+    \def\sectionlevel{#2}%
+    \def\temptype{#3}%
+    %
+    % It is ok for the @heading series commands to appear inside an
+    % environment (it's been historically allowed, though the logic is
+    % dubious), but not the others.
+    \ifx\temptype\Yomitfromtockeyword\else
+      \checkenv{}% non-@*heading should not be in an environment.
+    \fi
+    \let\footnote=\errfootnoteheading
+    %
+    % Switch to the right set of fonts.
+    \csname #2fonts\endcsname \rmisbold
+    %
+    % Insert first mark before the heading break (see notes for \domark).
+    \let\prevsectiondefs=\lastsectiondefs
+    \ifx\temptype\Ynothingkeyword
+      \ifx\sectionlevel\seckeyword
+        \gdef\lastsectiondefs{\gdef\thissectionname{#1}\gdef\thissectionnum{}%
+                              \gdef\thissection{\thissectionname}}%
+      \fi
+    \else\ifx\temptype\Yomitfromtockeyword
+      % Don't redefine \thissection.
+    \else\ifx\temptype\Yappendixkeyword
+      \ifx\sectionlevel\seckeyword
+        \toks0={#1}%
+        \xdef\lastsectiondefs{%
+          \gdef\noexpand\thissectionname{\the\toks0}%
+          \gdef\noexpand\thissectionnum{#4}%
+          % \noexpand\putwordSection avoids expanding indigestible
+          % commands in some of the translations.
+          \gdef\noexpand\thissection{\noexpand\putwordSection{}
+                                     \noexpand\thissectionnum:
+                                     \noexpand\thissectionname}%
+        }%
+      \fi
+    \else
+      \ifx\sectionlevel\seckeyword
+        \toks0={#1}%
+        \xdef\lastsectiondefs{%
+          \gdef\noexpand\thissectionname{\the\toks0}%
+          \gdef\noexpand\thissectionnum{#4}%
+          % \noexpand\putwordSection avoids expanding indigestible
+          % commands in some of the translations.
+          \gdef\noexpand\thissection{\noexpand\putwordSection{}
+                                     \noexpand\thissectionnum:
+                                     \noexpand\thissectionname}%
+        }%
+      \fi
+    \fi\fi\fi
+    %
+    % Go into vertical mode.  Usually we'll already be there, but we
+    % don't want the following whatsit to end up in a preceding paragraph
+    % if the document didn't happen to have a blank line.
+    \par
+    %
+    % Output the mark.  Pass it through \safewhatsit, to take care of
+    % the preceding space.
+    \safewhatsit\domark
+    %
+    % Insert space above the heading.
+    \csname #2headingbreak\endcsname
+    %
+    % Now the second mark, after the heading break.  No break points
+    % between here and the heading.
+    \global\let\prevsectiondefs=\lastsectiondefs
+    \domark
+    %
+    % Only insert the space after the number if we have a section number.
+    \ifx\temptype\Ynothingkeyword
+      \setbox0 = \hbox{}%
+      \def\toctype{unn}%
+      \gdef\lastsection{#1}%
+    \else\ifx\temptype\Yomitfromtockeyword
+      % for @headings -- no section number, don't include in toc,
+      % and don't redefine \lastsection.
+      \setbox0 = \hbox{}%
+      \def\toctype{omit}%
+      \let\sectionlevel=\empty
+    \else\ifx\temptype\Yappendixkeyword
+      \setbox0 = \hbox{#4\enspace}%
+      \def\toctype{app}%
+      \gdef\lastsection{#1}%
+    \else
+      \setbox0 = \hbox{#4\enspace}%
+      \def\toctype{num}%
+      \gdef\lastsection{#1}%
+    \fi\fi\fi
+    %
+    % Write the toc entry (before \donoderef).  See comments in \chapmacro.
+    \writetocentry{\toctype\sectionlevel}{#1}{#4}%
+    %
+    % Write the node reference (= pdf destination for pdftex).
+    % Again, see comments in \chapmacro.
+    \donoderef{#3}%
+    %
+    % Interline glue will be inserted when the vbox is completed.
+    % That glue will be a valid breakpoint for the page, since it'll be
+    % preceded by a whatsit (usually from the \donoderef, or from the
+    % \writetocentry if there was no node).  We don't want to allow that
+    % break, since then the whatsits could end up on page n while the
+    % section is on page n+1, thus toc/etc. are wrong.  Debian bug 276000.
+    \nobreak
+    %
+    % Output the actual section heading.
+    \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright
+          \hangindent=\wd0  % zero if no section number
+          \unhbox0 #1}%
+  }%
+  % Add extra space after the heading -- half of whatever came above it.
+  % Don't allow stretch, though.
+  \kern .5 \csname #2headingskip\endcsname
+  %
+  % Do not let the kern be a potential breakpoint, as it would be if it
+  % was followed by glue.
+  \nobreak
+  %
+  % We'll almost certainly start a paragraph next, so don't let that
+  % glue accumulate.  (Not a breakpoint because it's preceded by a
+  % discardable item.)  However, when a paragraph is not started next
+  % (\startdefun, \cartouche, \center, etc.), this needs to be wiped out
+  % or the negative glue will cause weirdly wrong output, typically
+  % obscuring the section heading with something else.
+  \vskip-\parskip
+  %
+  % This is so the last item on the main vertical list is a known
+  % \penalty > 10000, so \startdefun, etc., can recognize the situation
+  % and do the needful.
+  \penalty 10001
+}
+
+
+\message{toc,}
+% Table of contents.
+\newwrite\tocfile
+
+% Write an entry to the toc file, opening it if necessary.
+% Called from @chapter, etc.
+%
+% Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno}
+% We append the current node name (if any) and page number as additional
+% arguments for the \{chap,sec,...}entry macros which will eventually
+% read this.  The node name is used in the pdf outlines as the
+% destination to jump to.
+%
+% We open the .toc file for writing here instead of at @setfilename (or
+% any other fixed time) so that @contents can be anywhere in the document.
+% But if #1 is `omit', then we don't do anything.  This is used for the
+% table of contents chapter openings themselves.
+%
+\newif\iftocfileopened
+\def\omitkeyword{omit}%
+%
+\def\writetocentry#1#2#3{%
+  \edef\writetoctype{#1}%
+  \ifx\writetoctype\omitkeyword \else
+    \iftocfileopened\else
+      \immediate\openout\tocfile = \jobname.toc
+      \global\tocfileopenedtrue
+    \fi
+    %
+    \iflinks
+      {\atdummies
+       \edef\temp{%
+         \write\tocfile{@#1entry{#2}{#3}{\lastnode}{\noexpand\folio}}}%
+       \temp
+      }%
+    \fi
+  \fi
+  %
+  % Tell \shipout to create a pdf destination on each page, if we're
+  % writing pdf.  These are used in the table of contents.  We can't
+  % just write one on every page because the title pages are numbered
+  % 1 and 2 (the page numbers aren't printed), and so are the first
+  % two pages of the document.  Thus, we'd have two destinations named
+  % `1', and two named `2'.
+  \ifpdf \global\pdfmakepagedesttrue \fi
+}
+
+
+% These characters do not print properly in the Computer Modern roman
+% fonts, so we must take special care.  This is more or less redundant
+% with the Texinfo input format setup at the end of this file.
+%
+\def\activecatcodes{%
+  \catcode`\"=\active
+  \catcode`\$=\active
+  \catcode`\<=\active
+  \catcode`\>=\active
+  \catcode`\\=\active
+  \catcode`\^=\active
+  \catcode`\_=\active
+  \catcode`\|=\active
+  \catcode`\~=\active
+}
+
+
+% Read the toc file, which is essentially Texinfo input.
+\def\readtocfile{%
+  \setupdatafile
+  \activecatcodes
+  \input \tocreadfilename
+}
+
+\newskip\contentsrightmargin \contentsrightmargin=1in
+\newcount\savepageno
+\newcount\lastnegativepageno \lastnegativepageno = -1
+
+% Prepare to read what we've written to \tocfile.
+%
+\def\startcontents#1{%
+  % If @setchapternewpage on, and @headings double, the contents should
+  % start on an odd page, unlike chapters.  Thus, we maintain
+  % \contentsalignmacro in parallel with \pagealignmacro.
+  % From: Torbjorn Granlund <tege@matematik.su.se>
+  \contentsalignmacro
+  \immediate\closeout\tocfile
+  %
+  % Don't need to put `Contents' or `Short Contents' in the headline.
+  % It is abundantly clear what they are.
+  \chapmacro{#1}{Yomitfromtoc}{}%
+  %
+  \savepageno = \pageno
+  \begingroup                  % Set up to handle contents files properly.
+    \raggedbottom              % Worry more about breakpoints than the bottom.
+    \entryrightmargin=\contentsrightmargin % Don't use the full line length.
+    %
+    % Roman numerals for page numbers.
+    \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi
+}
+
+% redefined for the two-volume lispref.  We always output on
+% \jobname.toc even if this is redefined.
+%
+\def\tocreadfilename{\jobname.toc}
+
+% Normal (long) toc.
+%
+\def\contents{%
+  \startcontents{\putwordTOC}%
+    \openin 1 \tocreadfilename\space
+    \ifeof 1 \else
+      \readtocfile
+    \fi
+    \vfill \eject
+    \contentsalignmacro % in case @setchapternewpage odd is in effect
+    \ifeof 1 \else
+      \pdfmakeoutlines
+    \fi
+    \closein 1
+  \endgroup
+  \lastnegativepageno = \pageno
+  \global\pageno = \savepageno
+}
+
+% And just the chapters.
+\def\summarycontents{%
+  \startcontents{\putwordShortTOC}%
+    %
+    \let\partentry = \shortpartentry
+    \let\numchapentry = \shortchapentry
+    \let\appentry = \shortchapentry
+    \let\unnchapentry = \shortunnchapentry
+    % We want a true roman here for the page numbers.
+    \secfonts
+    \let\rm=\shortcontrm \let\bf=\shortcontbf
+    \let\sl=\shortcontsl \let\tt=\shortconttt
+    \rm
+    \hyphenpenalty = 10000
+    \advance\baselineskip by 1pt % Open it up a little.
+    \def\numsecentry##1##2##3##4{}
+    \let\appsecentry = \numsecentry
+    \let\unnsecentry = \numsecentry
+    \let\numsubsecentry = \numsecentry
+    \let\appsubsecentry = \numsecentry
+    \let\unnsubsecentry = \numsecentry
+    \let\numsubsubsecentry = \numsecentry
+    \let\appsubsubsecentry = \numsecentry
+    \let\unnsubsubsecentry = \numsecentry
+    \openin 1 \tocreadfilename\space
+    \ifeof 1 \else
+      \readtocfile
+    \fi
+    \closein 1
+    \vfill \eject
+    \contentsalignmacro % in case @setchapternewpage odd is in effect
+  \endgroup
+  \lastnegativepageno = \pageno
+  \global\pageno = \savepageno
+}
+\let\shortcontents = \summarycontents
+
+% Typeset the label for a chapter or appendix for the short contents.
+% The arg is, e.g., `A' for an appendix, or `3' for a chapter.
+%
+\def\shortchaplabel#1{%
+  % This space should be enough, since a single number is .5em, and the
+  % widest letter (M) is 1em, at least in the Computer Modern fonts.
+  % But use \hss just in case.
+  % (This space doesn't include the extra space that gets added after
+  % the label; that gets put in by \shortchapentry above.)
+  %
+  % We'd like to right-justify chapter numbers, but that looks strange
+  % with appendix letters.  And right-justifying numbers and
+  % left-justifying letters looks strange when there is less than 10
+  % chapters.  Have to read the whole toc once to know how many chapters
+  % there are before deciding ...
+  \hbox to 1em{#1\hss}%
+}
+
+% These macros generate individual entries in the table of contents.
+% The first argument is the chapter or section name.
+% The last argument is the page number.
+% The arguments in between are the chapter number, section number, ...
+
+% Parts, in the main contents.  Replace the part number, which doesn't
+% exist, with an empty box.  Let's hope all the numbers have the same width.
+% Also ignore the page number, which is conventionally not printed.
+\def\numeralbox{\setbox0=\hbox{8}\hbox to \wd0{\hfil}}
+\def\partentry#1#2#3#4{\dochapentry{\numeralbox\labelspace#1}{}}
+%
+% Parts, in the short toc.
+\def\shortpartentry#1#2#3#4{%
+  \penalty-300
+  \vskip.5\baselineskip plus.15\baselineskip minus.1\baselineskip
+  \shortchapentry{{\bf #1}}{\numeralbox}{}{}%
+}
+
+% Chapters, in the main contents.
+\def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}}
+
+% Chapters, in the short toc.
+% See comments in \dochapentry re vbox and related settings.
+\def\shortchapentry#1#2#3#4{%
+  \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#4\egroup}%
+}
+
+% Appendices, in the main contents.
+% Need the word Appendix, and a fixed-size box.
+%
+\def\appendixbox#1{%
+  % We use M since it's probably the widest letter.
+  \setbox0 = \hbox{\putwordAppendix{} M}%
+  \hbox to \wd0{\putwordAppendix{} #1\hss}}
+%
+\def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\hskip.7em#1}{#4}}
+
+% Unnumbered chapters.
+\def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}}
+\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{\doshortpageno\bgroup#4\egroup}}
+
+% Sections.
+\def\numsecentry#1#2#3#4{\dosecentry{#2\labelspace#1}{#4}}
+\let\appsecentry=\numsecentry
+\def\unnsecentry#1#2#3#4{\dosecentry{#1}{#4}}
+
+% Subsections.
+\def\numsubsecentry#1#2#3#4{\dosubsecentry{#2\labelspace#1}{#4}}
+\let\appsubsecentry=\numsubsecentry
+\def\unnsubsecentry#1#2#3#4{\dosubsecentry{#1}{#4}}
+
+% And subsubsections.
+\def\numsubsubsecentry#1#2#3#4{\dosubsubsecentry{#2\labelspace#1}{#4}}
+\let\appsubsubsecentry=\numsubsubsecentry
+\def\unnsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{#4}}
+
+% This parameter controls the indentation of the various levels.
+% Same as \defaultparindent.
+\newdimen\tocindent \tocindent = 15pt
+
+% Now for the actual typesetting. In all these, #1 is the text and #2 is the
+% page number.
+%
+% If the toc has to be broken over pages, we want it to be at chapters
+% if at all possible; hence the \penalty.
+\def\dochapentry#1#2{%
+   \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
+   \begingroup
+     % Move the page numbers slightly to the right
+     \advance\entryrightmargin by -0.05em
+     \chapentryfonts
+     \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+   \endgroup
+   \nobreak\vskip .25\baselineskip plus.1\baselineskip
+}
+
+\def\dosecentry#1#2{\begingroup
+  \secentryfonts \leftskip=\tocindent
+  \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+\endgroup}
+
+\def\dosubsecentry#1#2{\begingroup
+  \subsecentryfonts \leftskip=2\tocindent
+  \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+\endgroup}
+
+\def\dosubsubsecentry#1#2{\begingroup
+  \subsubsecentryfonts \leftskip=3\tocindent
+  \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+\endgroup}
+
+% We use the same \entry macro as for the index entries.
+\let\tocentry = \entry
+
+% Space between chapter (or whatever) number and the title.
+\def\labelspace{\hskip1em \relax}
+
+\def\dopageno#1{{\rm #1}}
+\def\doshortpageno#1{{\rm #1}}
+
+\def\chapentryfonts{\secfonts \rm}
+\def\secentryfonts{\textfonts}
+\def\subsecentryfonts{\textfonts}
+\def\subsubsecentryfonts{\textfonts}
+
+
+\message{environments,}
+% @foo ... @end foo.
+
+% @tex ... @end tex    escapes into raw TeX temporarily.
+% One exception: @ is still an escape character, so that @end tex works.
+% But \@ or @@ will get a plain @ character.
+
+\envdef\tex{%
+  \setupmarkupstyle{tex}%
+  \catcode `\\=0 \catcode `\{=1 \catcode `\}=2
+  \catcode `\$=3 \catcode `\&=4 \catcode `\#=6
+  \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie
+  \catcode `\%=14
+  \catcode `\+=\other
+  \catcode `\"=\other
+  \catcode `\|=\other
+  \catcode `\<=\other
+  \catcode `\>=\other
+  \catcode `\`=\other
+  \catcode `\'=\other
+  \escapechar=`\\
+  %
+  % ' is active in math mode (mathcode"8000).  So reset it, and all our
+  % other math active characters (just in case), to plain's definitions.
+  \mathactive
+  %
+  % Inverse of the list at the beginning of the file.
+  \let\b=\ptexb
+  \let\bullet=\ptexbullet
+  \let\c=\ptexc
+  \let\,=\ptexcomma
+  \let\.=\ptexdot
+  \let\dots=\ptexdots
+  \let\equiv=\ptexequiv
+  \let\!=\ptexexclam
+  \let\i=\ptexi
+  \let\indent=\ptexindent
+  \let\noindent=\ptexnoindent
+  \let\{=\ptexlbrace
+  \let\+=\tabalign
+  \let\}=\ptexrbrace
+  \let\/=\ptexslash
+  \let\sp=\ptexsp
+  \let\*=\ptexstar
+  %\let\sup=\ptexsup % do not redefine, we want @sup to work in math mode
+  \let\t=\ptext
+  \expandafter \let\csname top\endcsname=\ptextop  % we've made it outer
+  \let\frenchspacing=\plainfrenchspacing
+  %
+  \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
+  \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
+  \def\@{@}%
+}
+% There is no need to define \Etex.
+
+% Define @lisp ... @end lisp.
+% @lisp environment forms a group so it can rebind things,
+% including the definition of @end lisp (which normally is erroneous).
+
+% Amount to narrow the margins by for @lisp.
+\newskip\lispnarrowing \lispnarrowing=0.4in
+
+% This is the definition that ^^M gets inside @lisp, @example, and other
+% such environments.  \null is better than a space, since it doesn't
+% have any width.
+\def\lisppar{\null\endgraf}
+
+% This space is always present above and below environments.
+\newskip\envskipamount \envskipamount = 0pt
+
+% Make spacing and below environment symmetrical.  We use \parskip here
+% to help in doing that, since in @example-like environments \parskip
+% is reset to zero; thus the \afterenvbreak inserts no space -- but the
+% start of the next paragraph will insert \parskip.
+%
+\def\aboveenvbreak{{%
+  % =10000 instead of <10000 because of a special case in \itemzzz and
+  % \sectionheading, q.v.
+  \ifnum \lastpenalty=10000 \else
+    \advance\envskipamount by \parskip
+    \endgraf
+    \ifdim\lastskip<\envskipamount
+      \removelastskip
+      \ifnum\lastpenalty<10000
+        % Penalize breaking before the environment, because preceding text
+        % often leads into it.
+        \penalty100
+      \fi
+      \vskip\envskipamount
+    \fi
+  \fi
+}}
+
+\def\afterenvbreak{{%
+  % =10000 instead of <10000 because of a special case in \itemzzz and
+  % \sectionheading, q.v.
+  \ifnum \lastpenalty=10000 \else
+    \advance\envskipamount by \parskip
+    \endgraf
+    \ifdim\lastskip<\envskipamount
+      \removelastskip
+      % it's not a good place to break if the last penalty was \nobreak
+      % or better ...
+      \ifnum\lastpenalty<10000 \penalty-50 \fi
+      \vskip\envskipamount
+    \fi
+  \fi
+}}
+
+% \nonarrowing is a flag.  If "set", @lisp etc don't narrow margins; it will
+% also clear it, so that its embedded environments do the narrowing again.
+\let\nonarrowing=\relax
+
+% @cartouche ... @end cartouche: draw rectangle w/rounded corners around
+% environment contents.
+\font\circle=lcircle10
+\newdimen\circthick
+\newdimen\cartouter\newdimen\cartinner
+\newskip\normbskip\newskip\normpskip\newskip\normlskip
+\circthick=\fontdimen8\circle
+%
+\def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth
+\def\ctr{{\hskip 6pt\circle\char'010}}
+\def\cbl{{\circle\char'012\hskip -6pt}}
+\def\cbr{{\hskip 6pt\circle\char'011}}
+\def\carttop{\hbox to \cartouter{\hskip\lskip
+        \ctl\leaders\hrule height\circthick\hfil\ctr
+        \hskip\rskip}}
+\def\cartbot{\hbox to \cartouter{\hskip\lskip
+        \cbl\leaders\hrule height\circthick\hfil\cbr
+        \hskip\rskip}}
+%
+\newskip\lskip\newskip\rskip
+
+\envdef\cartouche{%
+  \ifhmode\par\fi  % can't be in the midst of a paragraph.
+  \startsavinginserts
+  \lskip=\leftskip \rskip=\rightskip
+  \leftskip=0pt\rightskip=0pt % we want these *outside*.
+  \cartinner=\hsize \advance\cartinner by-\lskip
+  \advance\cartinner by-\rskip
+  \cartouter=\hsize
+  \advance\cartouter by 18.4pt	% allow for 3pt kerns on either
+				% side, and for 6pt waste from
+				% each corner char, and rule thickness
+  \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
+  %
+  % If this cartouche directly follows a sectioning command, we need the
+  % \parskip glue (backspaced over by default) or the cartouche can
+  % collide with the section heading.
+  \ifnum\lastpenalty>10000 \vskip\parskip \penalty\lastpenalty \fi
+  %
+  \setbox\groupbox=\vbox\bgroup
+      \baselineskip=0pt\parskip=0pt\lineskip=0pt
+      \carttop
+      \hbox\bgroup
+	  \hskip\lskip
+	  \vrule\kern3pt
+	  \vbox\bgroup
+	      \kern3pt
+	      \hsize=\cartinner
+	      \baselineskip=\normbskip
+	      \lineskip=\normlskip
+	      \parskip=\normpskip
+	      \vskip -\parskip
+	      \comment % For explanation, see the end of def\group.
+}
+\def\Ecartouche{%
+              \ifhmode\par\fi
+	      \kern3pt
+	  \egroup
+	  \kern3pt\vrule
+	  \hskip\rskip
+      \egroup
+      \cartbot
+  \egroup
+  \addgroupbox
+  \checkinserts
+}
+
+
+% This macro is called at the beginning of all the @example variants,
+% inside a group.
+\newdimen\nonfillparindent
+\def\nonfillstart{%
+  \aboveenvbreak
+  \ifdim\hfuzz < 12pt \hfuzz = 12pt \fi % Don't be fussy
+  \sepspaces % Make spaces be word-separators rather than space tokens.
+  \let\par = \lisppar % don't ignore blank lines
+  \obeylines % each line of input is a line of output
+  \parskip = 0pt
+  % Turn off paragraph indentation but redefine \indent to emulate
+  % the normal \indent.
+  \nonfillparindent=\parindent
+  \parindent = 0pt
+  \let\indent\nonfillindent
+  %
+  \emergencystretch = 0pt % don't try to avoid overfull boxes
+  \ifx\nonarrowing\relax
+    \advance \leftskip by \lispnarrowing
+    \exdentamount=\lispnarrowing
+  \else
+    \let\nonarrowing = \relax
+  \fi
+  \let\exdent=\nofillexdent
+}
+
+\begingroup
+\obeyspaces
+% We want to swallow spaces (but not other tokens) after the fake
+% @indent in our nonfill-environments, where spaces are normally
+% active and set to @tie, resulting in them not being ignored after
+% @indent.
+\gdef\nonfillindent{\futurelet\temp\nonfillindentcheck}%
+\gdef\nonfillindentcheck{%
+\ifx\temp %
+\expandafter\nonfillindentgobble%
+\else%
+\leavevmode\nonfillindentbox%
+\fi%
+}%
+\endgroup
+\def\nonfillindentgobble#1{\nonfillindent}
+\def\nonfillindentbox{\hbox to \nonfillparindent{\hss}}
+
+% If you want all examples etc. small: @set dispenvsize small.
+% If you want even small examples the full size: @set dispenvsize nosmall.
+% This affects the following displayed environments:
+%    @example, @display, @format, @lisp
+%
+\def\smallword{small}
+\def\nosmallword{nosmall}
+\let\SETdispenvsize\relax
+\def\setnormaldispenv{%
+  \ifx\SETdispenvsize\smallword
+    % end paragraph for sake of leading, in case document has no blank
+    % line.  This is redundant with what happens in \aboveenvbreak, but
+    % we need to do it before changing the fonts, and it's inconvenient
+    % to change the fonts afterward.
+    \ifnum \lastpenalty=10000 \else \endgraf \fi
+    \smallexamplefonts \rm
+  \fi
+}
+\def\setsmalldispenv{%
+  \ifx\SETdispenvsize\nosmallword
+  \else
+    \ifnum \lastpenalty=10000 \else \endgraf \fi
+    \smallexamplefonts \rm
+  \fi
+}
+
+% We often define two environments, @foo and @smallfoo.
+% Let's do it in one command.  #1 is the env name, #2 the definition.
+\def\makedispenvdef#1#2{%
+  \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2}%
+  \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2}%
+  \expandafter\let\csname E#1\endcsname \afterenvbreak
+  \expandafter\let\csname Esmall#1\endcsname \afterenvbreak
+}
+
+% Define two environment synonyms (#1 and #2) for an environment.
+\def\maketwodispenvdef#1#2#3{%
+  \makedispenvdef{#1}{#3}%
+  \makedispenvdef{#2}{#3}%
+}
+%
+% @lisp: indented, narrowed, typewriter font;
+% @example: same as @lisp.
+%
+% @smallexample and @smalllisp: use smaller fonts.
+% Originally contributed by Pavel@xerox.
+%
+\maketwodispenvdef{lisp}{example}{%
+  \nonfillstart
+  \tt\setupmarkupstyle{example}%
+  \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
+  \gobble % eat return
+}
+% @display/@smalldisplay: same as @lisp except keep current font.
+%
+\makedispenvdef{display}{%
+  \nonfillstart
+  \gobble
+}
+
+% @format/@smallformat: same as @display except don't narrow margins.
+%
+\makedispenvdef{format}{%
+  \let\nonarrowing = t%
+  \nonfillstart
+  \gobble
+}
+
+% @flushleft: same as @format, but doesn't obey \SETdispenvsize.
+\envdef\flushleft{%
+  \let\nonarrowing = t%
+  \nonfillstart
+  \gobble
+}
+\let\Eflushleft = \afterenvbreak
+
+% @flushright.
+%
+\envdef\flushright{%
+  \let\nonarrowing = t%
+  \nonfillstart
+  \advance\leftskip by 0pt plus 1fill\relax
+  \gobble
+}
+\let\Eflushright = \afterenvbreak
+
+
+% @raggedright does more-or-less normal line breaking but no right
+% justification.  From plain.tex.  Don't stretch around special
+% characters in urls in this environment, since the stretch at the right
+% should be enough.
+\envdef\raggedright{%
+  \rightskip0pt plus2.4em \spaceskip.3333em \xspaceskip.5em\relax
+  \def\urefprestretchamount{0pt}%
+  \def\urefpoststretchamount{0pt}%
+}
+\let\Eraggedright\par
+
+\envdef\raggedleft{%
+  \parindent=0pt \leftskip0pt plus2em
+  \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt
+  \hbadness=10000 % Last line will usually be underfull, so turn off
+                  % badness reporting.
+}
+\let\Eraggedleft\par
+
+\envdef\raggedcenter{%
+  \parindent=0pt \rightskip0pt plus1em \leftskip0pt plus1em
+  \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt
+  \hbadness=10000 % Last line will usually be underfull, so turn off
+                  % badness reporting.
+}
+\let\Eraggedcenter\par
+
+
+% @quotation does normal linebreaking (hence we can't use \nonfillstart)
+% and narrows the margins.  We keep \parskip nonzero in general, since
+% we're doing normal filling.  So, when using \aboveenvbreak and
+% \afterenvbreak, temporarily make \parskip 0.
+%
+\makedispenvdef{quotation}{\quotationstart}
+%
+\def\quotationstart{%
+  \indentedblockstart % same as \indentedblock, but increase right margin too.
+  \ifx\nonarrowing\relax
+    \advance\rightskip by \lispnarrowing
+  \fi
+  \parsearg\quotationlabel
+}
+
+% We have retained a nonzero parskip for the environment, since we're
+% doing normal filling.
+%
+\def\Equotation{%
+  \par
+  \ifx\quotationauthor\thisisundefined\else
+    % indent a bit.
+    \leftline{\kern 2\leftskip \sl ---\quotationauthor}%
+  \fi
+  {\parskip=0pt \afterenvbreak}%
+}
+\def\Esmallquotation{\Equotation}
+
+% If we're given an argument, typeset it in bold with a colon after.
+\def\quotationlabel#1{%
+  \def\temp{#1}%
+  \ifx\temp\empty \else
+    {\bf #1: }%
+  \fi
+}
+
+% @indentedblock is like @quotation, but indents only on the left and
+% has no optional argument.
+% 
+\makedispenvdef{indentedblock}{\indentedblockstart}
+%
+\def\indentedblockstart{%
+  {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
+  \parindent=0pt
+  %
+  % @cartouche defines \nonarrowing to inhibit narrowing at next level down.
+  \ifx\nonarrowing\relax
+    \advance\leftskip by \lispnarrowing
+    \exdentamount = \lispnarrowing
+  \else
+    \let\nonarrowing = \relax
+  \fi
+}
+
+% Keep a nonzero parskip for the environment, since we're doing normal filling.
+%
+\def\Eindentedblock{%
+  \par
+  {\parskip=0pt \afterenvbreak}%
+}
+\def\Esmallindentedblock{\Eindentedblock}
+
+
+% LaTeX-like @verbatim...@end verbatim and @verb{<char>...<char>}
+% If we want to allow any <char> as delimiter,
+% we need the curly braces so that makeinfo sees the @verb command, eg:
+% `@verbx...x' would look like the '@verbx' command.  --janneke@gnu.org
+%
+% [Knuth]: Donald Ervin Knuth, 1996.  The TeXbook.
+%
+% [Knuth] p.344; only we need to do the other characters Texinfo sets
+% active too.  Otherwise, they get lost as the first character on a
+% verbatim line.
+\def\dospecials{%
+  \do\ \do\\\do\{\do\}\do\$\do\&%
+  \do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~%
+  \do\<\do\>\do\|\do\@\do+\do\"%
+  % Don't do the quotes -- if we do, @set txicodequoteundirected and
+  % @set txicodequotebacktick will not have effect on @verb and
+  % @verbatim, and ?` and !` ligatures won't get disabled.
+  %\do\`\do\'%
+}
+%
+% [Knuth] p. 380
+\def\uncatcodespecials{%
+  \def\do##1{\catcode`##1=\other}\dospecials}
+%
+% Setup for the @verb command.
+%
+% Eight spaces for a tab
+\begingroup
+  \catcode`\^^I=\active
+  \gdef\tabeightspaces{\catcode`\^^I=\active\def^^I{\ \ \ \ \ \ \ \ }}
+\endgroup
+%
+\def\setupverb{%
+  \tt  % easiest (and conventionally used) font for verbatim
+  \def\par{\leavevmode\endgraf}%
+  \setupmarkupstyle{verb}%
+  \tabeightspaces
+  % Respect line breaks,
+  % print special symbols as themselves, and
+  % make each space count
+  % must do in this order:
+  \obeylines \uncatcodespecials \sepspaces
+}
+
+% Setup for the @verbatim environment
+%
+% Real tab expansion.
+\newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount
+%
+% We typeset each line of the verbatim in an \hbox, so we can handle
+% tabs.  The \global is in case the verbatim line starts with an accent,
+% or some other command that starts with a begin-group.  Otherwise, the
+% entire \verbbox would disappear at the corresponding end-group, before
+% it is typeset.  Meanwhile, we can't have nested verbatim commands
+% (can we?), so the \global won't be overwriting itself.
+\newbox\verbbox
+\def\starttabbox{\global\setbox\verbbox=\hbox\bgroup}
+%
+\begingroup
+  \catcode`\^^I=\active
+  \gdef\tabexpand{%
+    \catcode`\^^I=\active
+    \def^^I{\leavevmode\egroup
+      \dimen\verbbox=\wd\verbbox % the width so far, or since the previous tab
+      \divide\dimen\verbbox by\tabw
+      \multiply\dimen\verbbox by\tabw % compute previous multiple of \tabw
+      \advance\dimen\verbbox by\tabw  % advance to next multiple of \tabw
+      \wd\verbbox=\dimen\verbbox \box\verbbox \starttabbox
+    }%
+  }
+\endgroup
+
+% start the verbatim environment.
+\def\setupverbatim{%
+  \let\nonarrowing = t%
+  \nonfillstart
+  \tt % easiest (and conventionally used) font for verbatim
+  % The \leavevmode here is for blank lines.  Otherwise, we would
+  % never \starttabox and the \egroup would end verbatim mode.
+  \def\par{\leavevmode\egroup\box\verbbox\endgraf}%
+  \tabexpand
+  \setupmarkupstyle{verbatim}%
+  % Respect line breaks,
+  % print special symbols as themselves, and
+  % make each space count.
+  % Must do in this order:
+  \obeylines \uncatcodespecials \sepspaces
+  \everypar{\starttabbox}%
+}
+
+% Do the @verb magic: verbatim text is quoted by unique
+% delimiter characters.  Before first delimiter expect a
+% right brace, after last delimiter expect closing brace:
+%
+%    \def\doverb'{'<char>#1<char>'}'{#1}
+%
+% [Knuth] p. 382; only eat outer {}
+\begingroup
+  \catcode`[=1\catcode`]=2\catcode`\{=\other\catcode`\}=\other
+  \gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next]
+\endgroup
+%
+\def\verb{\begingroup\setupverb\doverb}
+%
+%
+% Do the @verbatim magic: define the macro \doverbatim so that
+% the (first) argument ends when '@end verbatim' is reached, ie:
+%
+%     \def\doverbatim#1@end verbatim{#1}
+%
+% For Texinfo it's a lot easier than for LaTeX,
+% because texinfo's \verbatim doesn't stop at '\end{verbatim}':
+% we need not redefine '\', '{' and '}'.
+%
+% Inspired by LaTeX's verbatim command set [latex.ltx]
+%
+\begingroup
+  \catcode`\ =\active
+  \obeylines %
+  % ignore everything up to the first ^^M, that's the newline at the end
+  % of the @verbatim input line itself.  Otherwise we get an extra blank
+  % line in the output.
+  \xdef\doverbatim#1^^M#2@end verbatim{#2\noexpand\end\gobble verbatim}%
+  % We really want {...\end verbatim} in the body of the macro, but
+  % without the active space; thus we have to use \xdef and \gobble.
+\endgroup
+%
+\envdef\verbatim{%
+    \setupverbatim\doverbatim
+}
+\let\Everbatim = \afterenvbreak
+
+
+% @verbatiminclude FILE - insert text of file in verbatim environment.
+%
+\def\verbatiminclude{\parseargusing\filenamecatcodes\doverbatiminclude}
+%
+\def\doverbatiminclude#1{%
+  {%
+    \makevalueexpandable
+    \setupverbatim
+    \indexnofonts       % Allow `@@' and other weird things in file names.
+    \wlog{texinfo.tex: doing @verbatiminclude of #1^^J}%
+    \input #1
+    \afterenvbreak
+  }%
+}
+
+% @copying ... @end copying.
+% Save the text away for @insertcopying later.
+%
+% We save the uninterpreted tokens, rather than creating a box.
+% Saving the text in a box would be much easier, but then all the
+% typesetting commands (@smallbook, font changes, etc.) have to be done
+% beforehand -- and a) we want @copying to be done first in the source
+% file; b) letting users define the frontmatter in as flexible order as
+% possible is desirable.
+%
+\def\copying{\checkenv{}\begingroup\scanargctxt\docopying}
+\def\docopying#1@end copying{\endgroup\def\copyingtext{#1}}
+%
+\def\insertcopying{%
+  \begingroup
+    \parindent = 0pt  % paragraph indentation looks wrong on title page
+    \scanexp\copyingtext
+  \endgroup
+}
+
+
+\message{defuns,}
+% @defun etc.
+
+\newskip\defbodyindent \defbodyindent=.4in
+\newskip\defargsindent \defargsindent=50pt
+\newskip\deflastargmargin \deflastargmargin=18pt
+\newcount\defunpenalty
+
+% Start the processing of @deffn:
+\def\startdefun{%
+  \ifnum\lastpenalty<10000
+    \medbreak
+    \defunpenalty=10003 % Will keep this @deffn together with the
+                        % following @def command, see below.
+  \else
+    % If there are two @def commands in a row, we'll have a \nobreak,
+    % which is there to keep the function description together with its
+    % header.  But if there's nothing but headers, we need to allow a
+    % break somewhere.  Check specifically for penalty 10002, inserted
+    % by \printdefunline, instead of 10000, since the sectioning
+    % commands also insert a nobreak penalty, and we don't want to allow
+    % a break between a section heading and a defun.
+    %
+    % As a further refinement, we avoid "club" headers by signalling
+    % with penalty of 10003 after the very first @deffn in the
+    % sequence (see above), and penalty of 10002 after any following
+    % @def command.
+    \ifnum\lastpenalty=10002 \penalty2000 \else \defunpenalty=10002 \fi
+    %
+    % Similarly, after a section heading, do not allow a break.
+    % But do insert the glue.
+    \medskip  % preceded by discardable penalty, so not a breakpoint
+  \fi
+  %
+  \parindent=0in
+  \advance\leftskip by \defbodyindent
+  \exdentamount=\defbodyindent
+}
+
+\def\dodefunx#1{%
+  % First, check whether we are in the right environment:
+  \checkenv#1%
+  %
+  % As above, allow line break if we have multiple x headers in a row.
+  % It's not a great place, though.
+  \ifnum\lastpenalty=10002 \penalty3000 \else \defunpenalty=10002 \fi
+  %
+  % And now, it's time to reuse the body of the original defun:
+  \expandafter\gobbledefun#1%
+}
+\def\gobbledefun#1\startdefun{}
+
+% \printdefunline \deffnheader{text}
+%
+\def\printdefunline#1#2{%
+  \begingroup
+    % call \deffnheader:
+    #1#2 \endheader
+    % common ending:
+    \interlinepenalty = 10000
+    \advance\rightskip by 0pt plus 1fil\relax
+    \endgraf
+    \nobreak\vskip -\parskip
+    \penalty\defunpenalty  % signal to \startdefun and \dodefunx
+    % Some of the @defun-type tags do not enable magic parentheses,
+    % rendering the following check redundant.  But we don't optimize.
+    \checkparencounts
+  \endgroup
+}
+
+\def\Edefun{\endgraf\medbreak}
+
+% \makedefun{deffn} creates \deffn, \deffnx and \Edeffn;
+% the only thing remaining is to define \deffnheader.
+%
+\def\makedefun#1{%
+  \expandafter\let\csname E#1\endcsname = \Edefun
+  \edef\temp{\noexpand\domakedefun
+    \makecsname{#1}\makecsname{#1x}\makecsname{#1header}}%
+  \temp
+}
+
+% \domakedefun \deffn \deffnx \deffnheader { (defn. of \deffnheader) }
+%
+% Define \deffn and \deffnx, without parameters.
+% \deffnheader has to be defined explicitly.
+%
+\def\domakedefun#1#2#3{%
+  \envdef#1{%
+    \startdefun
+    \doingtypefnfalse    % distinguish typed functions from all else
+    \parseargusing\activeparens{\printdefunline#3}%
+  }%
+  \def#2{\dodefunx#1}%
+  \def#3%
+}
+
+\newif\ifdoingtypefn       % doing typed function?
+\newif\ifrettypeownline    % typeset return type on its own line?
+
+% @deftypefnnewline on|off says whether the return type of typed functions
+% are printed on their own line.  This affects @deftypefn, @deftypefun,
+% @deftypeop, and @deftypemethod.
+% 
+\parseargdef\deftypefnnewline{%
+  \def\temp{#1}%
+  \ifx\temp\onword
+    \expandafter\let\csname SETtxideftypefnnl\endcsname
+      = \empty
+  \else\ifx\temp\offword
+    \expandafter\let\csname SETtxideftypefnnl\endcsname
+      = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @txideftypefnnl value `\temp',
+                must be on|off}%
+  \fi\fi
+}
+
+% Untyped functions:
+
+% @deffn category name args
+\makedefun{deffn}{\deffngeneral{}}
+
+% @deffn category class name args
+\makedefun{defop}#1 {\defopon{#1\ \putwordon}}
+
+% \defopon {category on}class name args
+\def\defopon#1#2 {\deffngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
+
+% \deffngeneral {subind}category name args
+%
+\def\deffngeneral#1#2 #3 #4\endheader{%
+  % Remember that \dosubind{fn}{foo}{} is equivalent to \doind{fn}{foo}.
+  \dosubind{fn}{\code{#3}}{#1}%
+  \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}%
+}
+
+% Typed functions:
+
+% @deftypefn category type name args
+\makedefun{deftypefn}{\deftypefngeneral{}}
+
+% @deftypeop category class type name args
+\makedefun{deftypeop}#1 {\deftypeopon{#1\ \putwordon}}
+
+% \deftypeopon {category on}class type name args
+\def\deftypeopon#1#2 {\deftypefngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
+
+% \deftypefngeneral {subind}category type name args
+%
+\def\deftypefngeneral#1#2 #3 #4 #5\endheader{%
+  \dosubind{fn}{\code{#4}}{#1}%
+  \doingtypefntrue
+  \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
+}
+
+% Typed variables:
+
+% @deftypevr category type var args
+\makedefun{deftypevr}{\deftypecvgeneral{}}
+
+% @deftypecv category class type var args
+\makedefun{deftypecv}#1 {\deftypecvof{#1\ \putwordof}}
+
+% \deftypecvof {category of}class type var args
+\def\deftypecvof#1#2 {\deftypecvgeneral{\putwordof\ \code{#2}}{#1\ \code{#2}} }
+
+% \deftypecvgeneral {subind}category type var args
+%
+\def\deftypecvgeneral#1#2 #3 #4 #5\endheader{%
+  \dosubind{vr}{\code{#4}}{#1}%
+  \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
+}
+
+% Untyped variables:
+
+% @defvr category var args
+\makedefun{defvr}#1 {\deftypevrheader{#1} {} }
+
+% @defcv category class var args
+\makedefun{defcv}#1 {\defcvof{#1\ \putwordof}}
+
+% \defcvof {category of}class var args
+\def\defcvof#1#2 {\deftypecvof{#1}#2 {} }
+
+% Types:
+
+% @deftp category name args
+\makedefun{deftp}#1 #2 #3\endheader{%
+  \doind{tp}{\code{#2}}%
+  \defname{#1}{}{#2}\defunargs{#3\unskip}%
+}
+
+% Remaining @defun-like shortcuts:
+\makedefun{defun}{\deffnheader{\putwordDeffunc} }
+\makedefun{defmac}{\deffnheader{\putwordDefmac} }
+\makedefun{defspec}{\deffnheader{\putwordDefspec} }
+\makedefun{deftypefun}{\deftypefnheader{\putwordDeffunc} }
+\makedefun{defvar}{\defvrheader{\putwordDefvar} }
+\makedefun{defopt}{\defvrheader{\putwordDefopt} }
+\makedefun{deftypevar}{\deftypevrheader{\putwordDefvar} }
+\makedefun{defmethod}{\defopon\putwordMethodon}
+\makedefun{deftypemethod}{\deftypeopon\putwordMethodon}
+\makedefun{defivar}{\defcvof\putwordInstanceVariableof}
+\makedefun{deftypeivar}{\deftypecvof\putwordInstanceVariableof}
+
+% \defname, which formats the name of the @def (not the args).
+% #1 is the category, such as "Function".
+% #2 is the return type, if any.
+% #3 is the function name.
+%
+% We are followed by (but not passed) the arguments, if any.
+%
+\def\defname#1#2#3{%
+  \par
+  % Get the values of \leftskip and \rightskip as they were outside the @def...
+  \advance\leftskip by -\defbodyindent
+  %
+  % Determine if we are typesetting the return type of a typed function
+  % on a line by itself.
+  \rettypeownlinefalse
+  \ifdoingtypefn  % doing a typed function specifically?
+    % then check user option for putting return type on its own line:
+    \expandafter\ifx\csname SETtxideftypefnnl\endcsname\relax \else
+      \rettypeownlinetrue
+    \fi
+  \fi
+  %
+  % How we'll format the category name.  Putting it in brackets helps
+  % distinguish it from the body text that may end up on the next line
+  % just below it.
+  \def\temp{#1}%
+  \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi}
+  %
+  % Figure out line sizes for the paragraph shape.  We'll always have at
+  % least two.
+  \tempnum = 2
+  %
+  % The first line needs space for \box0; but if \rightskip is nonzero,
+  % we need only space for the part of \box0 which exceeds it:
+  \dimen0=\hsize  \advance\dimen0 by -\wd0  \advance\dimen0 by \rightskip
+  %
+  % If doing a return type on its own line, we'll have another line.
+  \ifrettypeownline
+    \advance\tempnum by 1
+    \def\maybeshapeline{0in \hsize}%
+  \else
+    \def\maybeshapeline{}%
+  \fi
+  %
+  % The continuations:
+  \dimen2=\hsize  \advance\dimen2 by -\defargsindent
+  %
+  % The final paragraph shape:
+  \parshape \tempnum  0in \dimen0  \maybeshapeline  \defargsindent \dimen2
+  %
+  % Put the category name at the right margin.
+  \noindent
+  \hbox to 0pt{%
+    \hfil\box0 \kern-\hsize
+    % \hsize has to be shortened this way:
+    \kern\leftskip
+    % Intentionally do not respect \rightskip, since we need the space.
+  }%
+  %
+  % Allow all lines to be underfull without complaint:
+  \tolerance=10000 \hbadness=10000
+  \exdentamount=\defbodyindent
+  {%
+    % defun fonts. We use typewriter by default (used to be bold) because:
+    % . we're printing identifiers, they should be in tt in principle.
+    % . in languages with many accents, such as Czech or French, it's
+    %   common to leave accents off identifiers.  The result looks ok in
+    %   tt, but exceedingly strange in rm.
+    % . we don't want -- and --- to be treated as ligatures.
+    % . this still does not fix the ?` and !` ligatures, but so far no
+    %   one has made identifiers using them :).
+    \df \tt
+    \def\temp{#2}% text of the return type
+    \ifx\temp\empty\else
+      \tclose{\temp}% typeset the return type
+      \ifrettypeownline
+        % put return type on its own line; prohibit line break following:
+        \hfil\vadjust{\nobreak}\break  
+      \else
+        \space  % type on same line, so just followed by a space
+      \fi
+    \fi           % no return type
+    #3% output function name
+  }%
+  {\rm\enskip}% hskip 0.5 em of \tenrm
+  %
+  \boldbrax
+  % arguments will be output next, if any.
+}
+
+% Print arguments in slanted roman (not ttsl), inconsistently with using
+% tt for the name.  This is because literal text is sometimes needed in
+% the argument list (groff manual), and ttsl and tt are not very
+% distinguishable.  Prevent hyphenation at `-' chars.
+%
+\def\defunargs#1{%
+  % use sl by default (not ttsl),
+  % tt for the names.
+  \df \sl \hyphenchar\font=0
+  %
+  % On the other hand, if an argument has two dashes (for instance), we
+  % want a way to get ttsl.  We used to recommend @var for that, so
+  % leave the code in, but it's strange for @var to lead to typewriter.
+  % Nowadays we recommend @code, since the difference between a ttsl hyphen
+  % and a tt hyphen is pretty tiny.  @code also disables ?` !`.
+  \def\var##1{{\setupmarkupstyle{var}\ttslanted{##1}}}%
+  #1%
+  \sl\hyphenchar\font=45
+}
+
+% We want ()&[] to print specially on the defun line.
+%
+\def\activeparens{%
+  \catcode`\(=\active \catcode`\)=\active
+  \catcode`\[=\active \catcode`\]=\active
+  \catcode`\&=\active
+}
+
+% Make control sequences which act like normal parenthesis chars.
+\let\lparen = ( \let\rparen = )
+
+% Be sure that we always have a definition for `(', etc.  For example,
+% if the fn name has parens in it, \boldbrax will not be in effect yet,
+% so TeX would otherwise complain about undefined control sequence.
+{
+  \activeparens
+  \global\let(=\lparen \global\let)=\rparen
+  \global\let[=\lbrack \global\let]=\rbrack
+  \global\let& = \&
+
+  \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
+  \gdef\magicamp{\let&=\amprm}
+}
+
+\newcount\parencount
+
+% If we encounter &foo, then turn on ()-hacking afterwards
+\newif\ifampseen
+\def\amprm#1 {\ampseentrue{\bf\&#1 }}
+
+\def\parenfont{%
+  \ifampseen
+    % At the first level, print parens in roman,
+    % otherwise use the default font.
+    \ifnum \parencount=1 \rm \fi
+  \else
+    % The \sf parens (in \boldbrax) actually are a little bolder than
+    % the contained text.  This is especially needed for [ and ] .
+    \sf
+  \fi
+}
+\def\infirstlevel#1{%
+  \ifampseen
+    \ifnum\parencount=1
+      #1%
+    \fi
+  \fi
+}
+\def\bfafterword#1 {#1 \bf}
+
+\def\opnr{%
+  \global\advance\parencount by 1
+  {\parenfont(}%
+  \infirstlevel \bfafterword
+}
+\def\clnr{%
+  {\parenfont)}%
+  \infirstlevel \sl
+  \global\advance\parencount by -1
+}
+
+\newcount\brackcount
+\def\lbrb{%
+  \global\advance\brackcount by 1
+  {\bf[}%
+}
+\def\rbrb{%
+  {\bf]}%
+  \global\advance\brackcount by -1
+}
+
+\def\checkparencounts{%
+  \ifnum\parencount=0 \else \badparencount \fi
+  \ifnum\brackcount=0 \else \badbrackcount \fi
+}
+% these should not use \errmessage; the glibc manual, at least, actually
+% has such constructs (when documenting function pointers).
+\def\badparencount{%
+  \message{Warning: unbalanced parentheses in @def...}%
+  \global\parencount=0
+}
+\def\badbrackcount{%
+  \message{Warning: unbalanced square brackets in @def...}%
+  \global\brackcount=0
+}
+
+
+\message{macros,}
+% @macro.
+
+% To do this right we need a feature of e-TeX, \scantokens,
+% which we arrange to emulate with a temporary file in ordinary TeX.
+\ifx\eTeXversion\thisisundefined
+  \newwrite\macscribble
+  \def\scantokens#1{%
+    \toks0={#1}%
+    \immediate\openout\macscribble=\jobname.tmp
+    \immediate\write\macscribble{\the\toks0}%
+    \immediate\closeout\macscribble
+    \input \jobname.tmp
+  }
+\fi
+
+\let\aftermacroxxx\relax
+\def\aftermacro{\aftermacroxxx}
+
+% alias because \c means cedilla in @tex or @math
+\let\texinfoc=\c
+
+% Used at the time of macro expansion.
+% Argument is macro body with arguments substituted
+\def\scanmacro#1{%
+  \newlinechar`\^^M
+  \def\xprocessmacroarg{\eatspaces}%
+  %
+  % Process the macro body under the current catcode regime.
+  \scantokens{#1\texinfoc}\aftermacro%
+  %
+  % The \c is to remove the \newlinechar added by \scantokens, and
+  % can be noticed by \parsearg.
+  %   The \aftermacro allows a \comment at the end of the macro definition
+  % to duplicate itself past the final \newlinechar added by \scantokens:
+  % this is used in the definition of \group to comment out a newline.  We
+  % don't do the same for \c to support Texinfo files with macros that ended
+  % with a @c, which should no longer be necessary.
+  %   We avoid surrounding the call to \scantokens with \bgroup and \egroup
+  % to allow macros to open or close groups themselves.
+}
+
+\def\scanexp#1{%
+  \bgroup
+  % Undo catcode changes of \startcontents and \printindex
+  % When called from @insertcopying or (short)caption, we need active
+  % backslash to get it printed correctly.
+  % FIXME: This may not be needed.
+  %\catcode`\@=0 \catcode`\\=\active \escapechar=`\@
+  \edef\temp{\noexpand\scanmacro{#1}}%
+  \temp
+  \egroup
+}
+
+\newcount\paramno   % Count of parameters
+\newtoks\macname    % Macro name
+\newif\ifrecursive  % Is it recursive?
+
+% List of all defined macros in the form
+%    \definedummyword\macro1\definedummyword\macro2...
+% Currently is also contains all @aliases; the list can be split
+% if there is a need.
+\def\macrolist{}
+
+% Add the macro to \macrolist
+\def\addtomacrolist#1{\expandafter \addtomacrolistxxx \csname#1\endcsname}
+\def\addtomacrolistxxx#1{%
+     \toks0 = \expandafter{\macrolist\definedummyword#1}%
+     \xdef\macrolist{\the\toks0}%
+}
+
+% Utility routines.
+% This does \let #1 = #2, with \csnames; that is,
+%   \let \csname#1\endcsname = \csname#2\endcsname
+% (except of course we have to play expansion games).
+%
+\def\cslet#1#2{%
+  \expandafter\let
+  \csname#1\expandafter\endcsname
+  \csname#2\endcsname
+}
+
+% Trim leading and trailing spaces off a string.
+% Concepts from aro-bend problem 15 (see CTAN).
+{\catcode`\@=11
+\gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }}
+\gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@}
+\gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @}
+\def\unbrace#1{#1}
+\unbrace{\gdef\trim@@@ #1 } #2@{#1}
+}
+
+% Trim a single trailing ^^M off a string.
+{\catcode`\^^M=\other \catcode`\Q=3%
+\gdef\eatcr #1{\eatcra #1Q^^MQ}%
+\gdef\eatcra#1^^MQ{\eatcrb#1Q}%
+\gdef\eatcrb#1Q#2Q{#1}%
+}
+
+% Macro bodies are absorbed as an argument in a context where
+% all characters are catcode 10, 11 or 12, except \ which is active
+% (as in normal texinfo). It is necessary to change the definition of \
+% to recognize macro arguments; this is the job of \mbodybackslash.
+%
+% Non-ASCII encodings make 8-bit characters active, so un-activate
+% them to avoid their expansion.  Must do this non-globally, to
+% confine the change to the current group.
+%
+% It's necessary to have hard CRs when the macro is executed. This is
+% done by making ^^M (\endlinechar) catcode 12 when reading the macro
+% body, and then making it the \newlinechar in \scanmacro.
+%
+\def\scanctxt{% used as subroutine
+  \catcode`\"=\other
+  \catcode`\+=\other
+  \catcode`\<=\other
+  \catcode`\>=\other
+  \catcode`\^=\other
+  \catcode`\_=\other
+  \catcode`\|=\other
+  \catcode`\~=\other
+  \ifx\declaredencoding\ascii \else \setnonasciicharscatcodenonglobal\other \fi
+}
+
+\def\scanargctxt{% used for copying and captions, not macros.
+  \scanctxt
+  \catcode`\@=\other
+  \catcode`\\=\other
+  \catcode`\^^M=\other
+}
+
+\def\macrobodyctxt{% used for @macro definitions
+  \scanctxt
+  \catcode`\ =\other
+  \catcode`\@=\other
+  \catcode`\{=\other
+  \catcode`\}=\other
+  \catcode`\^^M=\other
+  \usembodybackslash
+}
+
+% Used when scanning braced macro arguments.  Note, however, that catcode
+% changes here are ineffectual if the macro invocation was nested inside
+% an argument to another Texinfo command.
+\def\macroargctxt{%
+  \scanctxt
+  \catcode`\ =\active
+  \catcode`\^^M=\other
+  \catcode`\\=\active
+}
+
+\def\macrolineargctxt{% used for whole-line arguments without braces
+  \scanctxt
+  \catcode`\{=\other
+  \catcode`\}=\other
+}
+
+% \mbodybackslash is the definition of \ in @macro bodies.
+% It maps \foo\ => \csname macarg.foo\endcsname => #N
+% where N is the macro parameter number.
+% We define \csname macarg.\endcsname to be \realbackslash, so
+% \\ in macro replacement text gets you a backslash.
+%
+{\catcode`@=0 @catcode`@\=@active
+ @gdef@usembodybackslash{@let\=@mbodybackslash}
+ @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname}
+}
+\expandafter\def\csname macarg.\endcsname{\realbackslash}
+
+\def\margbackslash#1{\char`\#1 }
+
+\def\macro{\recursivefalse\parsearg\macroxxx}
+\def\rmacro{\recursivetrue\parsearg\macroxxx}
+
+\def\macroxxx#1{%
+  \getargs{#1}% now \macname is the macname and \argl the arglist
+  \ifx\argl\empty       % no arguments
+     \paramno=0\relax
+  \else
+     \expandafter\parsemargdef \argl;%
+     \if\paramno>256\relax
+       \ifx\eTeXversion\thisisundefined
+         \errhelp = \EMsimple
+         \errmessage{You need eTeX to compile a file with macros with more than 256 arguments}
+       \fi
+     \fi
+  \fi
+  \if1\csname ismacro.\the\macname\endcsname
+     \message{Warning: redefining \the\macname}%
+  \else
+     \expandafter\ifx\csname \the\macname\endcsname \relax
+     \else \errmessage{Macro name \the\macname\space already defined}\fi
+     \global\cslet{macsave.\the\macname}{\the\macname}%
+     \global\expandafter\let\csname ismacro.\the\macname\endcsname=1%
+     \addtomacrolist{\the\macname}%
+  \fi
+  \begingroup \macrobodyctxt
+  \ifrecursive \expandafter\parsermacbody
+  \else \expandafter\parsemacbody
+  \fi}
+
+\parseargdef\unmacro{%
+  \if1\csname ismacro.#1\endcsname
+    \global\cslet{#1}{macsave.#1}%
+    \global\expandafter\let \csname ismacro.#1\endcsname=0%
+    % Remove the macro name from \macrolist:
+    \begingroup
+      \expandafter\let\csname#1\endcsname \relax
+      \let\definedummyword\unmacrodo
+      \xdef\macrolist{\macrolist}%
+    \endgroup
+  \else
+    \errmessage{Macro #1 not defined}%
+  \fi
+}
+
+% Called by \do from \dounmacro on each macro.  The idea is to omit any
+% macro definitions that have been changed to \relax.
+%
+\def\unmacrodo#1{%
+  \ifx #1\relax
+    % remove this
+  \else
+    \noexpand\definedummyword \noexpand#1%
+  \fi
+}
+
+% \getargs -- Parse the arguments to a @macro line.  Set \macname to
+% the name of the macro, and \argl to the braced argument list.
+\def\getargs#1{\getargsxxx#1{}}
+\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs}
+\def\getmacname#1 #2\relax{\macname={#1}}
+\def\getmacargs#1{\def\argl{#1}}
+% This made use of the feature that if the last token of a
+% <parameter list> is #, then the preceding argument is delimited by
+% an opening brace, and that opening brace is not consumed.
+
+% Parse the optional {params} list to @macro or @rmacro.
+% Set \paramno to the number of arguments,
+% and \paramlist to a parameter text for the macro (e.g. #1,#2,#3 for a
+% three-param macro.)  Define \macarg.BLAH for each BLAH in the params
+% list to some hook where the argument is to be expanded.  If there are
+% less than 10 arguments that hook is to be replaced by ##N where N
+% is the position in that list, that is to say the macro arguments are to be
+% defined `a la TeX in the macro body.  
+%
+% That gets used by \mbodybackslash (above).
+%
+% If there are 10 or more arguments, a different technique is used: see
+% \parsemmanyargdef.
+%
+\def\parsemargdef#1;{%
+  \paramno=0\def\paramlist{}%
+  \let\hash\relax
+  % \hash is redefined to `#' later to get it into definitions
+  \let\processmacroarg\relax
+  \parsemargdefxxx#1,;,%
+  \ifnum\paramno<10\relax\else
+    \paramno0\relax
+    \parsemmanyargdef@@#1,;,% 10 or more arguments
+  \fi
+}
+\def\parsemargdefxxx#1,{%
+  \if#1;\let\next=\relax
+  \else \let\next=\parsemargdefxxx
+    \advance\paramno by 1
+    \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname
+        {\processmacroarg{\hash\the\paramno}}%
+    \edef\paramlist{\paramlist\hash\the\paramno,}%
+  \fi\next}
+
+% \parsemacbody, \parsermacbody
+%
+% Read recursive and nonrecursive macro bodies. (They're different since
+% rec and nonrec macros end differently.)
+% 
+% We are in \macrobodyctxt, and the \xdef causes backslashshes in the macro 
+% body to be transformed.
+% Set \macrobody to the body of the macro, and call \defmacro.
+%
+{\catcode`\ =\other\long\gdef\parsemacbody#1@end macro{%
+\xdef\macrobody{\eatcr{#1}}\endgroup\defmacro}}%
+{\catcode`\ =\other\long\gdef\parsermacbody#1@end rmacro{%
+\xdef\macrobody{\eatcr{#1}}\endgroup\defmacro}}%
+
+% Make @ a letter, so that we can make private-to-Texinfo macro names.
+\edef\texiatcatcode{\the\catcode`\@}
+\catcode `@=11\relax
+
+%%%%%%%%%%%%%% Code for > 10 arguments only   %%%%%%%%%%%%%%%%%%
+
+% If there are 10 or more arguments, a different technique is used, where the
+% hook remains in the body, and when macro is to be expanded the body is
+% processed again to replace the arguments.
+%
+% In that case, the hook is \the\toks N-1, and we simply set \toks N-1 to the
+% argument N value and then \edef the body (nothing else will expand because of
+% the catcode regime under which the body was input).
+%
+% If you compile with TeX (not eTeX), and you have macros with 10 or more
+% arguments, no macro can have more than 256 arguments (else error).
+%
+% In case that there are 10 or more arguments we parse again the arguments
+% list to set new definitions for the \macarg.BLAH macros corresponding to
+% each BLAH argument. It was anyhow needed to parse already once this list
+% in order to count the arguments, and as macros with at most 9 arguments
+% are by far more frequent than macro with 10 or more arguments, defining
+% twice the \macarg.BLAH macros does not cost too much processing power.
+\def\parsemmanyargdef@@#1,{%
+  \if#1;\let\next=\relax
+  \else 
+    \let\next=\parsemmanyargdef@@
+    \edef\tempb{\eatspaces{#1}}%
+    \expandafter\def\expandafter\tempa
+       \expandafter{\csname macarg.\tempb\endcsname}%
+    % Note that we need some extra \noexpand\noexpand, this is because we
+    % don't want \the  to be expanded in the \parsermacbody  as it uses an
+    % \xdef .
+    \expandafter\edef\tempa
+      {\noexpand\noexpand\noexpand\the\toks\the\paramno}%
+    \advance\paramno by 1\relax
+  \fi\next}
+
+
+\let\endargs@\relax
+\let\nil@\relax
+\def\nilm@{\nil@}%
+\long\def\nillm@{\nil@}%
+
+% This macro is expanded during the Texinfo macro expansion, not during its
+% definition.  It gets all the arguments' values and assigns them to macros
+% macarg.ARGNAME
+%
+% #1 is the macro name
+% #2 is the list of argument names
+% #3 is the list of argument values
+\def\getargvals@#1#2#3{%
+  \def\macargdeflist@{}%
+  \def\saveparamlist@{#2}% Need to keep a copy for parameter expansion.
+  \def\paramlist{#2,\nil@}%
+  \def\macroname{#1}%
+  \begingroup
+  \macroargctxt
+  \def\argvaluelist{#3,\nil@}%
+  \def\@tempa{#3}%
+  \ifx\@tempa\empty
+    \setemptyargvalues@
+  \else
+    \getargvals@@
+  \fi
+}
+\def\getargvals@@{%
+  \ifx\paramlist\nilm@
+      % Some sanity check needed here that \argvaluelist is also empty.
+      \ifx\argvaluelist\nillm@
+      \else
+        \errhelp = \EMsimple
+        \errmessage{Too many arguments in macro `\macroname'!}%
+      \fi
+      \let\next\macargexpandinbody@
+  \else
+    \ifx\argvaluelist\nillm@
+       % No more arguments values passed to macro.  Set remaining named-arg
+       % macros to empty.
+       \let\next\setemptyargvalues@
+    \else
+      % pop current arg name into \@tempb
+      \def\@tempa##1{\pop@{\@tempb}{\paramlist}##1\endargs@}%
+      \expandafter\@tempa\expandafter{\paramlist}%
+       % pop current argument value into \@tempc
+      \def\@tempa##1{\longpop@{\@tempc}{\argvaluelist}##1\endargs@}%
+      \expandafter\@tempa\expandafter{\argvaluelist}%
+       % Here \@tempb is the current arg name and \@tempc is the current arg value.
+       % First place the new argument macro definition into \@tempd
+       \expandafter\macname\expandafter{\@tempc}%
+       \expandafter\let\csname macarg.\@tempb\endcsname\relax
+       \expandafter\def\expandafter\@tempe\expandafter{%
+         \csname macarg.\@tempb\endcsname}%
+       \edef\@tempd{\long\def\@tempe{\the\macname}}%
+       \push@\@tempd\macargdeflist@
+       \let\next\getargvals@@
+    \fi
+  \fi
+  \next
+}
+
+\def\push@#1#2{%
+  \expandafter\expandafter\expandafter\def
+  \expandafter\expandafter\expandafter#2%
+  \expandafter\expandafter\expandafter{%
+  \expandafter#1#2}%
+}
+
+% Replace arguments by their values in the macro body, and place the result
+% in macro \@tempa.
+% 
+\def\macvalstoargs@{%
+  %  To do this we use the property that token registers that are \the'ed
+  % within an \edef  expand only once. So we are going to place all argument
+  % values into respective token registers.
+  %
+  % First we save the token context, and initialize argument numbering.
+  \begingroup
+    \paramno0\relax
+    % Then, for each argument number #N, we place the corresponding argument
+    % value into a new token list register \toks#N
+    \expandafter\putargsintokens@\saveparamlist@,;,%
+    % Then, we expand the body so that argument are replaced by their
+    % values. The trick for values not to be expanded themselves is that they
+    % are within tokens and that tokens expand only once in an \edef .
+    \edef\@tempc{\csname mac.\macroname .body\endcsname}%
+    % Now we restore the token stack pointer to free the token list registers
+    % which we have used, but we make sure that expanded body is saved after
+    % group.
+    \expandafter
+  \endgroup
+  \expandafter\def\expandafter\@tempa\expandafter{\@tempc}%
+  }
+
+% Define the named-macro outside of this group and then close this group. 
+% 
+\def\macargexpandinbody@{% 
+  \expandafter
+  \endgroup
+  \macargdeflist@
+  % First the replace in body the macro arguments by their values, the result
+  % is in \@tempa .
+  \macvalstoargs@
+  % Then we point at the \norecurse or \gobble (for recursive) macro value
+  % with \@tempb .
+  \expandafter\let\expandafter\@tempb\csname mac.\macroname .recurse\endcsname
+  % Depending on whether it is recursive or not, we need some tailing
+  % \egroup .
+  \ifx\@tempb\gobble
+     \let\@tempc\relax
+  \else
+     \let\@tempc\egroup
+  \fi
+  % And now we do the real job:
+  \edef\@tempd{\noexpand\@tempb{\macroname}\noexpand\scanmacro{\@tempa}\@tempc}%
+  \@tempd
+}
+
+\def\putargsintokens@#1,{%
+  \if#1;\let\next\relax
+  \else
+    \let\next\putargsintokens@
+    % First we allocate the new token list register, and give it a temporary
+    % alias \@tempb .
+    \toksdef\@tempb\the\paramno
+    % Then we place the argument value into that token list register.
+    \expandafter\let\expandafter\@tempa\csname macarg.#1\endcsname
+    \expandafter\@tempb\expandafter{\@tempa}%
+    \advance\paramno by 1\relax
+  \fi
+  \next
+}
+
+% Trailing missing arguments are set to empty.
+% 
+\def\setemptyargvalues@{%
+  \ifx\paramlist\nilm@
+    \let\next\macargexpandinbody@
+  \else
+    \expandafter\setemptyargvaluesparser@\paramlist\endargs@
+    \let\next\setemptyargvalues@
+  \fi
+  \next
+}
+
+\def\setemptyargvaluesparser@#1,#2\endargs@{%
+  \expandafter\def\expandafter\@tempa\expandafter{%
+    \expandafter\def\csname macarg.#1\endcsname{}}%
+  \push@\@tempa\macargdeflist@
+  \def\paramlist{#2}%
+}
+
+% #1 is the element target macro
+% #2 is the list macro
+% #3,#4\endargs@ is the list value
+\def\pop@#1#2#3,#4\endargs@{%
+   \def#1{#3}%
+   \def#2{#4}%
+}
+\long\def\longpop@#1#2#3,#4\endargs@{%
+   \long\def#1{#3}%
+   \long\def#2{#4}%
+}
+
+
+%%%%%%%%%%%%%% End of code for > 10 arguments %%%%%%%%%%%%%%%%%%
+
+
+
+% Remove following spaces at the expansion stage.
+% This works because spaces are discarded before each argument when TeX is 
+% getting the arguments for a macro.
+% This must not be immediately followed by a }.
+\long\def\gobblespaces#1{#1}
+
+% This defines a Texinfo @macro or @rmacro, called by \parsemacbody.
+%    \macrobody has the body of the macro in it, with placeholders for
+% its parameters, looking like "\processmacroarg{\hash 1}".
+%    \paramno is the number of parameters
+%    \paramlist is a TeX parameter text, e.g. "#1,#2,#3,"
+% There are eight cases: recursive and nonrecursive macros of zero, one,
+% up to nine, and many arguments.
+% \xdef is used so that macro definitions will survive the file
+% they're defined in: @include reads the file inside a group.
+%
+\def\defmacro{%
+  \let\hash=##% convert placeholders to macro parameter chars
+  \ifnum\paramno=1
+    \def\processmacroarg{\gobblespaces}%
+    % This removes the pair of braces around the argument.  We don't
+    % use \eatspaces, because this can cause ends of lines to be lost
+    % when the argument to \eatspaces is read, leading to line-based
+    % commands like "@itemize" not being read correctly.
+  \else
+    \def\processmacroarg{\xprocessmacroarg}%
+    \let\xprocessmacroarg\relax
+  \fi
+  \ifrecursive   %%%%%%%%%%%%%% Recursive %%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+    \ifcase\paramno
+    % 0
+      \expandafter\xdef\csname\the\macname\endcsname{%
+        \noexpand\scanmacro{\macrobody}}%
+    \or % 1
+      \expandafter\xdef\csname\the\macname\endcsname{%
+         \bgroup
+         \noexpand\braceorline
+         \expandafter\noexpand\csname\the\macname @@@\endcsname}%
+      \expandafter\xdef\csname\the\macname @@@\endcsname##1{%
+         \expandafter\noexpand\csname\the\macname @@@@\endcsname{%
+           \noexpand\gobblespaces##1\empty}%
+           % The \empty is for \gobblespaces in case #1 is empty
+         }%
+      \expandafter\xdef\csname\the\macname @@@@\endcsname##1{%
+         \egroup\noexpand\scanmacro{\macrobody}}%
+    \else
+      \ifnum\paramno<10\relax % at most 9
+        % See non-recursive section below for comments
+        \expandafter\xdef\csname\the\macname\endcsname{%
+          \bgroup
+          \noexpand\expandafter
+          \noexpand\macroargctxt
+          \noexpand\expandafter
+          \expandafter\noexpand\csname\the\macname @@\endcsname}%
+        \expandafter\xdef\csname\the\macname @@\endcsname##1{%
+            \noexpand\passargtomacro
+            \expandafter\noexpand\csname\the\macname @@@\endcsname{##1,}}%
+        \expandafter\xdef\csname\the\macname @@@\endcsname##1{%
+            \expandafter\noexpand\csname\the\macname @@@@\endcsname ##1}%
+        \expandafter\expandafter
+        \expandafter\xdef
+        \expandafter\expandafter
+          \csname\the\macname @@@@\endcsname\paramlist{%
+            \egroup\noexpand\scanmacro{\macrobody}}%
+      \else % 10 or more
+        \expandafter\xdef\csname\the\macname\endcsname{%
+          \noexpand\getargvals@{\the\macname}{\argl}%
+        }%    
+        \global\expandafter\let\csname mac.\the\macname .body\endcsname\macrobody
+        \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\gobble
+      \fi
+    \fi
+  \else  %%%%%%%%%%%%%%%%%%%%%% Non-recursive %%%%%%%%%%%%%%%%%%%%%%%%%%
+    \ifcase\paramno
+    % 0
+      \expandafter\xdef\csname\the\macname\endcsname{%
+        \noexpand\scanmacro{\macrobody}}%
+    \or % 1
+      \expandafter\xdef\csname\the\macname\endcsname{%
+         \bgroup
+         \noexpand\braceorline
+         \expandafter\noexpand\csname\the\macname @@@\endcsname}%
+      \expandafter\xdef\csname\the\macname @@@\endcsname##1{%
+         \expandafter\noexpand\csname\the\macname @@@@\endcsname{%
+           \noexpand\gobblespaces##1\empty}%
+           % The \empty is for \gobblespaces in case #1 is empty
+         }%
+      \expandafter\xdef\csname\the\macname @@@@\endcsname##1{%
+        \egroup
+        \noexpand\scanmacro{\macrobody}%
+        }%
+    \else % at most 9
+      \ifnum\paramno<10\relax
+        % @MACNAME sets the context for reading the macro argument
+        % @MACNAME@@ gets the argument, processes backslashes and appends a 
+        % comma.
+        % @MACNAME@@@ removes braces surrounding the argument list.
+        % @MACNAME@@@@ scans the macro body with arguments substituted.
+        \expandafter\xdef\csname\the\macname\endcsname{%
+          \bgroup
+          \noexpand\expandafter  % This \expandafter skip any spaces after the
+          \noexpand\macroargctxt % macro before we change the catcode of space.
+          \noexpand\expandafter
+          \expandafter\noexpand\csname\the\macname @@\endcsname}%
+        \expandafter\xdef\csname\the\macname @@\endcsname##1{%
+            \noexpand\passargtomacro
+            \expandafter\noexpand\csname\the\macname @@@\endcsname{##1,}}%
+        \expandafter\xdef\csname\the\macname @@@\endcsname##1{%
+            \expandafter\noexpand\csname\the\macname @@@@\endcsname ##1}%
+        \expandafter\expandafter
+        \expandafter\xdef
+        \expandafter\expandafter
+          \csname\the\macname @@@@\endcsname\paramlist{%
+            \egroup\noexpand\scanmacro{\macrobody}}%
+      \else % 10 or more:
+        \expandafter\xdef\csname\the\macname\endcsname{%
+          \noexpand\getargvals@{\the\macname}{\argl}%
+        }%
+        \global\expandafter\let\csname mac.\the\macname .body\endcsname\macrobody
+        \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\norecurse
+      \fi
+    \fi
+  \fi}
+
+\catcode `\@\texiatcatcode\relax % end private-to-Texinfo catcodes
+
+\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}}
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+{\catcode`\@=0 \catcode`\\=13  % We need to manipulate \ so use @ as escape
+@catcode`@_=11  % private names
+@catcode`@!=11  % used as argument separator
+
+% \passargtomacro#1#2 -
+% Call #1 with a list of tokens #2, with any doubled backslashes in #2
+% compressed to one.
+%
+% This implementation works by expansion, and not execution (so we cannot use 
+% \def or similar).  This reduces the risk of this failing in contexts where 
+% complete expansion is done with no execution (for example, in writing out to 
+% an auxiliary file for an index entry).
+% 
+% State is kept in the input stream: the argument passed to
+% @look_ahead, @gobble_and_check_finish and @add_segment is
+%
+% THE_MACRO ARG_RESULT ! {PENDING_BS} NEXT_TOKEN  (... rest of input)
+%
+% where:
+% THE_MACRO - name of the macro we want to call
+% ARG_RESULT - argument list we build to pass to that macro
+% PENDING_BS - either a backslash or nothing
+% NEXT_TOKEN - used to look ahead in the input stream to see what's coming next
+
+@gdef@passargtomacro#1#2{%
+  @add_segment #1!{}@relax#2\@_finish\%
+}
+@gdef@_finish{@_finishx} @global@let@_finishx@relax
+
+% #1 - THE_MACRO ARG_RESULT
+% #2 - PENDING_BS
+% #3 - NEXT_TOKEN
+% #4 used to look ahead
+%
+% If the next token is not a backslash, process the rest of the argument; 
+% otherwise, remove the next token.
+@gdef@look_ahead#1!#2#3#4{%
+  @ifx#4\%
+   @expandafter@gobble_and_check_finish 
+  @else
+   @expandafter@add_segment
+  @fi#1!{#2}#4#4%
+}
+
+% #1 - THE_MACRO ARG_RESULT
+% #2 - PENDING_BS
+% #3 - NEXT_TOKEN
+% #4 should be a backslash, which is gobbled.
+% #5 looks ahead
+%
+% Double backslash found.  Add a single backslash, and look ahead.
+@gdef@gobble_and_check_finish#1!#2#3#4#5{%
+  @add_segment#1\!{}#5#5%
+}
+
+@gdef@is_fi{@fi}
+
+% #1 - THE_MACRO ARG_RESULT
+% #2 - PENDING_BS
+% #3 - NEXT_TOKEN
+% #4 is input stream until next backslash
+%
+% Input stream is either at the start of the argument, or just after a 
+% backslash sequence, either a lone backslash, or a doubled backslash.  
+% NEXT_TOKEN contains the first token in the input stream: if it is \finish, 
+% finish; otherwise, append to ARG_RESULT the segment of the argument up until
+% the next backslash.  PENDING_BACKSLASH contains a backslash to represent
+% a backslash just before the start of the input stream that has not been
+% added to ARG_RESULT.
+@gdef@add_segment#1!#2#3#4\{%
+@ifx#3@_finish
+  @call_the_macro#1!%
+@else
+  % append the pending backslash to the result, followed by the next segment
+  @expandafter@is_fi@look_ahead#1#2#4!{\}@fi
+  % this @fi is discarded by @look_ahead.
+  % we can't get rid of it with \expandafter because we don't know how 
+  % long #4 is.
+}
+
+% #1 - THE_MACRO
+% #2 - ARG_RESULT
+% #3 discards the res of the conditional in @add_segment, and @is_fi ends the 
+% conditional.
+@gdef@call_the_macro#1#2!#3@fi{@is_fi #1{#2}}
+
+}
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+% \braceorline MAC is used for a one-argument macro MAC.  It checks
+% whether the next non-whitespace character is a {.  It sets the context
+% for reading the argument (slightly different in the two cases).  Then,
+% to read the argument, in the whole-line case, it then calls the regular
+% \parsearg MAC; in the lbrace case, it calls \passargtomacro MAC.
+% 
+\def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx}
+\def\braceorlinexxx{%
+  \ifx\nchar\bgroup
+    \macroargctxt
+    \expandafter\passargtomacro
+  \else
+    \macrolineargctxt\expandafter\parsearg
+  \fi \macnamexxx}
+
+
+% @alias.
+% We need some trickery to remove the optional spaces around the equal
+% sign.  Make them active and then expand them all to nothing.
+%
+\def\alias{\parseargusing\obeyspaces\aliasxxx}
+\def\aliasxxx #1{\aliasyyy#1\relax}
+\def\aliasyyy #1=#2\relax{%
+  {%
+    \expandafter\let\obeyedspace=\empty
+    \addtomacrolist{#1}%
+    \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}%
+  }%
+  \next
+}
+
+
+\message{cross references,}
+
+\newwrite\auxfile
+\newif\ifhavexrefs    % True if xref values are known.
+\newif\ifwarnedxrefs  % True if we warned once that they aren't known.
+
+% @inforef is relatively simple.
+\def\inforef #1{\inforefzzz #1,,,,**}
+\def\inforefzzz #1,#2,#3,#4**{%
+  \putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
+  node \samp{\ignorespaces#1{}}}
+
+% @node's only job in TeX is to define \lastnode, which is used in
+% cross-references.  The @node line might or might not have commas, and
+% might or might not have spaces before the first comma, like:
+% @node foo , bar , ...
+% We don't want such trailing spaces in the node name.
+%
+\parseargdef\node{\checkenv{}\donode #1 ,\finishnodeparse}
+%
+% also remove a trailing comma, in case of something like this:
+% @node Help-Cross,  ,  , Cross-refs
+\def\donode#1 ,#2\finishnodeparse{\dodonode #1,\finishnodeparse}
+\def\dodonode#1,#2\finishnodeparse{\gdef\lastnode{#1}}
+
+\let\nwnode=\node
+\let\lastnode=\empty
+
+% Write a cross-reference definition for the current node.  #1 is the
+% type (Ynumbered, Yappendix, Ynothing).
+%
+\def\donoderef#1{%
+  \ifx\lastnode\empty\else
+    \setref{\lastnode}{#1}%
+    \global\let\lastnode=\empty
+  \fi
+}
+
+% @anchor{NAME} -- define xref target at arbitrary point.
+%
+\newcount\savesfregister
+%
+\def\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi}
+\def\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi}
+\def\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces}
+
+% \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an
+% anchor), which consists of three parts:
+% 1) NAME-title - the current sectioning name taken from \lastsection,
+%                 or the anchor name.
+% 2) NAME-snt   - section number and type, passed as the SNT arg, or
+%                 empty for anchors.
+% 3) NAME-pg    - the page number.
+%
+% This is called from \donoderef, \anchor, and \dofloat.  In the case of
+% floats, there is an additional part, which is not written here:
+% 4) NAME-lof   - the text as it should appear in a @listoffloats.
+%
+\def\setref#1#2{%
+  \pdfmkdest{#1}%
+  \iflinks
+    {%
+      \requireauxfile
+      \atdummies  % preserve commands, but don't expand them
+      \edef\writexrdef##1##2{%
+	\write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef
+	  ##1}{##2}}% these are parameters of \writexrdef
+      }%
+      \toks0 = \expandafter{\lastsection}%
+      \immediate \writexrdef{title}{\the\toks0 }%
+      \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc.
+      \safewhatsit{\writexrdef{pg}{\folio}}% will be written later, at \shipout
+    }%
+  \fi
+}
+
+% @xrefautosectiontitle on|off says whether @section(ing) names are used
+% automatically in xrefs, if the third arg is not explicitly specified.
+% This was provided as a "secret" @set xref-automatic-section-title
+% variable, now it's official.
+% 
+\parseargdef\xrefautomaticsectiontitle{%
+  \def\temp{#1}%
+  \ifx\temp\onword
+    \expandafter\let\csname SETxref-automatic-section-title\endcsname
+      = \empty
+  \else\ifx\temp\offword
+    \expandafter\let\csname SETxref-automatic-section-title\endcsname
+      = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @xrefautomaticsectiontitle value `\temp',
+                must be on|off}%
+  \fi\fi
+}
+
+% 
+% @xref, @pxref, and @ref generate cross-references.  For \xrefX, #1 is
+% the node name, #2 the name of the Info cross-reference, #3 the printed
+% node name, #4 the name of the Info file, #5 the name of the printed
+% manual.  All but the node name can be omitted.
+%
+\def\pxref{\putwordsee{} \xrefXX}
+\def\xref{\putwordSee{} \xrefXX}
+\def\ref{\xrefXX}
+
+\def\xrefXX#1{\def\xrefXXarg{#1}\futurelet\tokenafterxref\xrefXXX}
+\def\xrefXXX{\expandafter\xrefX\expandafter[\xrefXXarg,,,,,,,]}
+%
+\newbox\toprefbox
+\newbox\printedrefnamebox
+\newbox\infofilenamebox
+\newbox\printedmanualbox
+%
+\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
+  \unsepspaces
+  %
+  % Get args without leading/trailing spaces.
+  \def\printedrefname{\ignorespaces #3}%
+  \setbox\printedrefnamebox = \hbox{\printedrefname\unskip}%
+  %
+  \def\infofilename{\ignorespaces #4}%
+  \setbox\infofilenamebox = \hbox{\infofilename\unskip}%
+  %
+  \def\printedmanual{\ignorespaces #5}%
+  \setbox\printedmanualbox  = \hbox{\printedmanual\unskip}%
+  %
+  % If the printed reference name (arg #3) was not explicitly given in
+  % the @xref, figure out what we want to use.
+  \ifdim \wd\printedrefnamebox = 0pt
+    % No printed node name was explicitly given.
+    \expandafter\ifx\csname SETxref-automatic-section-title\endcsname \relax
+      % Not auto section-title: use node name inside the square brackets.
+      \def\printedrefname{\ignorespaces #1}%
+    \else
+      % Auto section-title: use chapter/section title inside
+      % the square brackets if we have it.
+      \ifdim \wd\printedmanualbox > 0pt
+        % It is in another manual, so we don't have it; use node name.
+        \def\printedrefname{\ignorespaces #1}%
+      \else
+        \ifhavexrefs
+          % We (should) know the real title if we have the xref values.
+          \def\printedrefname{\refx{#1-title}{}}%
+        \else
+          % Otherwise just copy the Info node name.
+          \def\printedrefname{\ignorespaces #1}%
+        \fi%
+      \fi
+    \fi
+  \fi
+  %
+  % Make link in pdf output.
+  \ifpdf
+    {\indexnofonts
+     \turnoffactive
+     \makevalueexpandable
+     % This expands tokens, so do it after making catcode changes, so _
+     % etc. don't get their TeX definitions.  This ignores all spaces in
+     % #4, including (wrongly) those in the middle of the filename.
+     \getfilename{#4}%
+     %
+     % This (wrongly) does not take account of leading or trailing
+     % spaces in #1, which should be ignored.
+     \edef\pdfxrefdest{#1}%
+     \ifx\pdfxrefdest\empty
+       \def\pdfxrefdest{Top}% no empty targets
+     \else
+       \txiescapepdf\pdfxrefdest  % escape PDF special chars
+     \fi
+     %
+     \leavevmode
+     \startlink attr{/Border [0 0 0]}%
+     \ifnum\filenamelength>0
+       goto file{\the\filename.pdf} name{\pdfxrefdest}%
+     \else
+       goto name{\pdfmkpgn{\pdfxrefdest}}%
+     \fi
+    }%
+    \setcolor{\linkcolor}%
+  \fi
+  %
+  % Float references are printed completely differently: "Figure 1.2"
+  % instead of "[somenode], p.3".  We distinguish them by the
+  % LABEL-title being set to a magic string.
+  {%
+    % Have to otherify everything special to allow the \csname to
+    % include an _ in the xref name, etc.
+    \indexnofonts
+    \turnoffactive
+    \expandafter\global\expandafter\let\expandafter\Xthisreftitle
+      \csname XR#1-title\endcsname
+  }%
+  \iffloat\Xthisreftitle
+    % If the user specified the print name (third arg) to the ref,
+    % print it instead of our usual "Figure 1.2".
+    \ifdim\wd\printedrefnamebox = 0pt
+      \refx{#1-snt}{}%
+    \else
+      \printedrefname
+    \fi
+    %
+    % If the user also gave the printed manual name (fifth arg), append
+    % "in MANUALNAME".
+    \ifdim \wd\printedmanualbox > 0pt
+      \space \putwordin{} \cite{\printedmanual}%
+    \fi
+  \else
+    % node/anchor (non-float) references.
+    % 
+    % If we use \unhbox to print the node names, TeX does not insert
+    % empty discretionaries after hyphens, which means that it will not
+    % find a line break at a hyphen in a node names.  Since some manuals
+    % are best written with fairly long node names, containing hyphens,
+    % this is a loss.  Therefore, we give the text of the node name
+    % again, so it is as if TeX is seeing it for the first time.
+    % 
+    \ifdim \wd\printedmanualbox > 0pt
+      % Cross-manual reference with a printed manual name.
+      % 
+      \crossmanualxref{\cite{\printedmanual\unskip}}%
+    %
+    \else\ifdim \wd\infofilenamebox > 0pt
+      % Cross-manual reference with only an info filename (arg 4), no
+      % printed manual name (arg 5).  This is essentially the same as
+      % the case above; we output the filename, since we have nothing else.
+      % 
+      \crossmanualxref{\code{\infofilename\unskip}}%
+    %
+    \else
+      % Reference within this manual.
+      %
+      % _ (for example) has to be the character _ for the purposes of the
+      % control sequence corresponding to the node, but it has to expand
+      % into the usual \leavevmode...\vrule stuff for purposes of
+      % printing. So we \turnoffactive for the \refx-snt, back on for the
+      % printing, back off for the \refx-pg.
+      {\turnoffactive
+       % Only output a following space if the -snt ref is nonempty; for
+       % @unnumbered and @anchor, it won't be.
+       \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
+       \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
+      }%
+      % output the `[mynode]' via the macro below so it can be overridden.
+      \xrefprintnodename\printedrefname
+      %
+      % But we always want a comma and a space:
+      ,\space
+      %
+      % output the `page 3'.
+      \turnoffactive \putwordpage\tie\refx{#1-pg}{}%
+           \ifx,\tokenafterxref
+      \else\ifx.\tokenafterxref
+      \else\ifx;\tokenafterxref
+      \else\ifx)\tokenafterxref
+      \else,% add a , if xref not followed by punctuation
+      \fi\fi\fi\fi
+    \fi\fi
+  \fi
+  \endlink
+\endgroup}
+
+% Output a cross-manual xref to #1.  Used just above (twice).
+% 
+% Only include the text "Section ``foo'' in" if the foo is neither
+% missing or Top.  Thus, @xref{,,,foo,The Foo Manual} outputs simply
+% "see The Foo Manual", the idea being to refer to the whole manual.
+% 
+% But, this being TeX, we can't easily compare our node name against the
+% string "Top" while ignoring the possible spaces before and after in
+% the input.  By adding the arbitrary 7sp below, we make it much less
+% likely that a real node name would have the same width as "Top" (e.g.,
+% in a monospaced font).  Hopefully it will never happen in practice.
+% 
+% For the same basic reason, we retypeset the "Top" at every
+% reference, since the current font is indeterminate.
+% 
+\def\crossmanualxref#1{%
+  \setbox\toprefbox = \hbox{Top\kern7sp}%
+  \setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}%
+  \ifdim \wd2 > 7sp  % nonempty?
+    \ifdim \wd2 = \wd\toprefbox \else  % same as Top?
+      \putwordSection{} ``\printedrefname'' \putwordin{}\space
+    \fi
+  \fi
+  #1%
+}
+
+% This macro is called from \xrefX for the `[nodename]' part of xref
+% output.  It's a separate macro only so it can be changed more easily,
+% since square brackets don't work well in some documents.  Particularly
+% one that Bob is working on :).
+%
+\def\xrefprintnodename#1{[#1]}
+
+% Things referred to by \setref.
+%
+\def\Ynothing{}
+\def\Yomitfromtoc{}
+\def\Ynumbered{%
+  \ifnum\secno=0
+    \putwordChapter@tie \the\chapno
+  \else \ifnum\subsecno=0
+    \putwordSection@tie \the\chapno.\the\secno
+  \else \ifnum\subsubsecno=0
+    \putwordSection@tie \the\chapno.\the\secno.\the\subsecno
+  \else
+    \putwordSection@tie \the\chapno.\the\secno.\the\subsecno.\the\subsubsecno
+  \fi\fi\fi
+}
+\def\Yappendix{%
+  \ifnum\secno=0
+     \putwordAppendix@tie @char\the\appendixno{}%
+  \else \ifnum\subsecno=0
+     \putwordSection@tie @char\the\appendixno.\the\secno
+  \else \ifnum\subsubsecno=0
+    \putwordSection@tie @char\the\appendixno.\the\secno.\the\subsecno
+  \else
+    \putwordSection@tie
+      @char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno
+  \fi\fi\fi
+}
+
+% Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME.
+% If its value is nonempty, SUFFIX is output afterward.
+%
+\def\refx#1#2{%
+  \requireauxfile
+  {%
+    \indexnofonts
+    \otherbackslash
+    \expandafter\global\expandafter\let\expandafter\thisrefX
+      \csname XR#1\endcsname
+  }%
+  \ifx\thisrefX\relax
+    % If not defined, say something at least.
+    \angleleft un\-de\-fined\angleright
+    \iflinks
+      \ifhavexrefs
+        {\toks0 = {#1}% avoid expansion of possibly-complex value
+         \message{\linenumber Undefined cross reference `\the\toks0'.}}%
+      \else
+        \ifwarnedxrefs\else
+          \global\warnedxrefstrue
+          \message{Cross reference values unknown; you must run TeX again.}%
+        \fi
+      \fi
+    \fi
+  \else
+    % It's defined, so just use it.
+    \thisrefX
+  \fi
+  #2% Output the suffix in any case.
+}
+
+% This is the macro invoked by entries in the aux file.  Usually it's
+% just a \def (we prepend XR to the control sequence name to avoid
+% collisions).  But if this is a float type, we have more work to do.
+%
+\def\xrdef#1#2{%
+  {% The node name might contain 8-bit characters, which in our current
+   % implementation are changed to commands like @'e.  Don't let these
+   % mess up the control sequence name.
+    \indexnofonts
+    \turnoffactive
+    \xdef\safexrefname{#1}%
+  }%
+  %
+  \expandafter\gdef\csname XR\safexrefname\endcsname{#2}% remember this xref
+  %
+  % Was that xref control sequence that we just defined for a float?
+  \expandafter\iffloat\csname XR\safexrefname\endcsname
+    % it was a float, and we have the (safe) float type in \iffloattype.
+    \expandafter\let\expandafter\floatlist
+      \csname floatlist\iffloattype\endcsname
+    %
+    % Is this the first time we've seen this float type?
+    \expandafter\ifx\floatlist\relax
+      \toks0 = {\do}% yes, so just \do
+    \else
+      % had it before, so preserve previous elements in list.
+      \toks0 = \expandafter{\floatlist\do}%
+    \fi
+    %
+    % Remember this xref in the control sequence \floatlistFLOATTYPE,
+    % for later use in \listoffloats.
+    \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0
+      {\safexrefname}}%
+  \fi
+}
+
+% If working on a large document in chapters, it is convenient to
+% be able to disable indexing, cross-referencing, and contents, for test runs.
+% This is done with @novalidate at the beginning of the file.
+%
+\newif\iflinks \linkstrue % by default we want the aux files.
+\let\novalidate = \linksfalse
+
+% Used when writing to the aux file, or when using data from it.
+\def\requireauxfile{%
+  \iflinks
+    \tryauxfile
+    % Open the new aux file.  TeX will close it automatically at exit.
+    \immediate\openout\auxfile=\jobname.aux
+  \fi
+  \global\let\requireauxfile=\relax   % Only do this once.
+}
+
+% Read the last existing aux file, if any.  No error if none exists.
+%
+\def\tryauxfile{%
+  \openin 1 \jobname.aux
+  \ifeof 1 \else
+    \readdatafile{aux}%
+    \global\havexrefstrue
+  \fi
+  \closein 1
+}
+
+\def\setupdatafile{%
+  \catcode`\^^@=\other
+  \catcode`\^^A=\other
+  \catcode`\^^B=\other
+  \catcode`\^^C=\other
+  \catcode`\^^D=\other
+  \catcode`\^^E=\other
+  \catcode`\^^F=\other
+  \catcode`\^^G=\other
+  \catcode`\^^H=\other
+  \catcode`\^^K=\other
+  \catcode`\^^L=\other
+  \catcode`\^^N=\other
+  \catcode`\^^P=\other
+  \catcode`\^^Q=\other
+  \catcode`\^^R=\other
+  \catcode`\^^S=\other
+  \catcode`\^^T=\other
+  \catcode`\^^U=\other
+  \catcode`\^^V=\other
+  \catcode`\^^W=\other
+  \catcode`\^^X=\other
+  \catcode`\^^Z=\other
+  \catcode`\^^[=\other
+  \catcode`\^^\=\other
+  \catcode`\^^]=\other
+  \catcode`\^^^=\other
+  \catcode`\^^_=\other
+  % It was suggested to set the catcode of ^ to 7, which would allow ^^e4 etc.
+  % in xref tags, i.e., node names.  But since ^^e4 notation isn't
+  % supported in the main text, it doesn't seem desirable.  Furthermore,
+  % that is not enough: for node names that actually contain a ^
+  % character, we would end up writing a line like this: 'xrdef {'hat
+  % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first
+  % argument, and \hat is not an expandable control sequence.  It could
+  % all be worked out, but why?  Either we support ^^ or we don't.
+  %
+  % The other change necessary for this was to define \auxhat:
+  % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter
+  % and then to call \auxhat in \setq.
+  %
+  \catcode`\^=\other
+  %
+  % Special characters.  Should be turned off anyway, but...
+  \catcode`\~=\other
+  \catcode`\[=\other
+  \catcode`\]=\other
+  \catcode`\"=\other
+  \catcode`\_=\other
+  \catcode`\|=\other
+  \catcode`\<=\other
+  \catcode`\>=\other
+  \catcode`\$=\other
+  \catcode`\#=\other
+  \catcode`\&=\other
+  \catcode`\%=\other
+  \catcode`+=\other % avoid \+ for paranoia even though we've turned it off
+  %
+  % This is to support \ in node names and titles, since the \
+  % characters end up in a \csname.  It's easier than
+  % leaving it active and making its active definition an actual \
+  % character.  What I don't understand is why it works in the *value*
+  % of the xrdef.  Seems like it should be a catcode12 \, and that
+  % should not typeset properly.  But it works, so I'm moving on for
+  % now.  --karl, 15jan04.
+  \catcode`\\=\other
+  %
+  % Make the characters 128-255 be printing characters.
+  {\setnonasciicharscatcodenonglobal\other}%
+  %
+  % @ is our escape character in .aux files, and we need braces.
+  \catcode`\{=1
+  \catcode`\}=2
+  \catcode`\@=0
+}
+
+\def\readdatafile#1{%
+\begingroup
+  \setupdatafile
+  \input\jobname.#1
+\endgroup}
+
+
+\message{insertions,}
+% including footnotes.
+
+\newcount \footnoteno
+
+% The trailing space in the following definition for supereject is
+% vital for proper filling; pages come out unaligned when you do a
+% pagealignmacro call if that space before the closing brace is
+% removed. (Generally, numeric constants should always be followed by a
+% space to prevent strange expansion errors.)
+\def\supereject{\par\penalty -20000\footnoteno =0 }
+
+% @footnotestyle is meaningful for Info output only.
+\let\footnotestyle=\comment
+
+{\catcode `\@=11
+%
+% Auto-number footnotes.  Otherwise like plain.
+\gdef\footnote{%
+  \global\advance\footnoteno by \@ne
+  \edef\thisfootno{$^{\the\footnoteno}$}%
+  %
+  % In case the footnote comes at the end of a sentence, preserve the
+  % extra spacing after we do the footnote number.
+  \let\@sf\empty
+  \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\ptexslash\fi
+  %
+  % Remove inadvertent blank space before typesetting the footnote number.
+  \unskip
+  \thisfootno\@sf
+  \dofootnote
+}%
+
+% Don't bother with the trickery in plain.tex to not require the
+% footnote text as a parameter.  Our footnotes don't need to be so general.
+%
+% Oh yes, they do; otherwise, @ifset (and anything else that uses
+% \parseargline) fails inside footnotes because the tokens are fixed when
+% the footnote is read.  --karl, 16nov96.
+%
+\gdef\dofootnote{%
+  \insert\footins\bgroup
+  %
+  % Nested footnotes are not supported in TeX, that would take a lot
+  % more work.  (\startsavinginserts does not suffice.)
+  \let\footnote=\errfootnotenest
+  %
+  % We want to typeset this text as a normal paragraph, even if the
+  % footnote reference occurs in (for example) a display environment.
+  % So reset some parameters.
+  \hsize=\pagewidth
+  \interlinepenalty\interfootnotelinepenalty
+  \splittopskip\ht\strutbox % top baseline for broken footnotes
+  \splitmaxdepth\dp\strutbox
+  \floatingpenalty\@MM
+  \leftskip\z@skip
+  \rightskip\z@skip
+  \spaceskip\z@skip
+  \xspaceskip\z@skip
+  \parindent\defaultparindent
+  %
+  \smallfonts \rm
+  %
+  % Because we use hanging indentation in footnotes, a @noindent appears
+  % to exdent this text, so make it be a no-op.  makeinfo does not use
+  % hanging indentation so @noindent can still be needed within footnote
+  % text after an @example or the like (not that this is good style).
+  \let\noindent = \relax
+  %
+  % Hang the footnote text off the number.  Use \everypar in case the
+  % footnote extends for more than one paragraph.
+  \everypar = {\hang}%
+  \textindent{\thisfootno}%
+  %
+  % Don't crash into the line above the footnote text.  Since this
+  % expands into a box, it must come within the paragraph, lest it
+  % provide a place where TeX can split the footnote.
+  \footstrut
+  %
+  % Invoke rest of plain TeX footnote routine.
+  \futurelet\next\fo@t
+}
+}%end \catcode `\@=11
+
+\def\errfootnotenest{%
+  \errhelp=\EMsimple
+  \errmessage{Nested footnotes not supported in texinfo.tex,
+    even though they work in makeinfo; sorry}
+}
+
+\def\errfootnoteheading{%
+  \errhelp=\EMsimple
+  \errmessage{Footnotes in chapters, sections, etc., are not supported}
+}
+
+% In case a @footnote appears in a vbox, save the footnote text and create
+% the real \insert just after the vbox finished.  Otherwise, the insertion
+% would be lost.
+% Similarly, if a @footnote appears inside an alignment, save the footnote
+% text to a box and make the \insert when a row of the table is finished.
+% And the same can be done for other insert classes.  --kasal, 16nov03.
+%
+% Replace the \insert primitive by a cheating macro.
+% Deeper inside, just make sure that the saved insertions are not spilled
+% out prematurely.
+%
+\def\startsavinginserts{%
+  \ifx \insert\ptexinsert
+    \let\insert\saveinsert
+  \else
+    \let\checkinserts\relax
+  \fi
+}
+
+% This \insert replacement works for both \insert\footins{foo} and
+% \insert\footins\bgroup foo\egroup, but it doesn't work for \insert27{foo}.
+%
+\def\saveinsert#1{%
+  \edef\next{\noexpand\savetobox \makeSAVEname#1}%
+  \afterassignment\next
+  % swallow the left brace
+  \let\temp =
+}
+\def\makeSAVEname#1{\makecsname{SAVE\expandafter\gobble\string#1}}
+\def\savetobox#1{\global\setbox#1 = \vbox\bgroup \unvbox#1}
+
+\def\checksaveins#1{\ifvoid#1\else \placesaveins#1\fi}
+
+\def\placesaveins#1{%
+  \ptexinsert \csname\expandafter\gobblesave\string#1\endcsname
+    {\box#1}%
+}
+
+% eat @SAVE -- beware, all of them have catcode \other:
+{
+  \def\dospecials{\do S\do A\do V\do E} \uncatcodespecials  %  ;-)
+  \gdef\gobblesave @SAVE{}
+}
+
+% initialization:
+\def\newsaveins #1{%
+  \edef\next{\noexpand\newsaveinsX \makeSAVEname#1}%
+  \next
+}
+\def\newsaveinsX #1{%
+  \csname newbox\endcsname #1%
+  \expandafter\def\expandafter\checkinserts\expandafter{\checkinserts
+    \checksaveins #1}%
+}
+
+% initialize:
+\let\checkinserts\empty
+\newsaveins\footins
+\newsaveins\margin
+
+
+% @image.  We use the macros from epsf.tex to support this.
+% If epsf.tex is not installed and @image is used, we complain.
+%
+% Check for and read epsf.tex up front.  If we read it only at @image
+% time, we might be inside a group, and then its definitions would get
+% undone and the next image would fail.
+\openin 1 = epsf.tex
+\ifeof 1 \else
+  % Do not bother showing banner with epsf.tex v2.7k (available in
+  % doc/epsf.tex and on ctan).
+  \def\epsfannounce{\toks0 = }%
+  \input epsf.tex
+\fi
+\closein 1
+%
+% We will only complain once about lack of epsf.tex.
+\newif\ifwarnednoepsf
+\newhelp\noepsfhelp{epsf.tex must be installed for images to
+  work.  It is also included in the Texinfo distribution, or you can get
+  it from ftp://tug.org/tex/epsf.tex.}
+%
+\def\image#1{%
+  \ifx\epsfbox\thisisundefined
+    \ifwarnednoepsf \else
+      \errhelp = \noepsfhelp
+      \errmessage{epsf.tex not found, images will be ignored}%
+      \global\warnednoepsftrue
+    \fi
+  \else
+    \imagexxx #1,,,,,\finish
+  \fi
+}
+%
+% Arguments to @image:
+% #1 is (mandatory) image filename; we tack on .eps extension.
+% #2 is (optional) width, #3 is (optional) height.
+% #4 is (ignored optional) html alt text.
+% #5 is (ignored optional) extension.
+% #6 is just the usual extra ignored arg for parsing stuff.
+\newif\ifimagevmode
+\def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup
+  \catcode`\^^M = 5     % in case we're inside an example
+  \normalturnoffactive  % allow _ et al. in names
+  \def\xprocessmacroarg{\eatspaces}% in case we are being used via a macro
+  % If the image is by itself, center it.
+  \ifvmode
+    \imagevmodetrue
+  \else \ifx\centersub\centerV
+    % for @center @image, we need a vbox so we can have our vertical space
+    \imagevmodetrue
+    \vbox\bgroup % vbox has better behavior than vtop herev
+  \fi\fi
+  %
+  \ifimagevmode
+    \nobreak\medskip
+    % Usually we'll have text after the image which will insert
+    % \parskip glue, so insert it here too to equalize the space
+    % above and below.
+    \nobreak\vskip\parskip
+    \nobreak
+  \fi
+  %
+  % Leave vertical mode so that indentation from an enclosing
+  %  environment such as @quotation is respected.
+  % However, if we're at the top level, we don't want the
+  %  normal paragraph indentation.
+  % On the other hand, if we are in the case of @center @image, we don't
+  %  want to start a paragraph, which will create a hsize-width box and
+  %  eradicate the centering.
+  \ifx\centersub\centerV\else \noindent \fi
+  %
+  % Output the image.
+  \ifpdf
+    \dopdfimage{#1}{#2}{#3}%
+  \else
+    % \epsfbox itself resets \epsf?size at each figure.
+    \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
+    \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
+    \epsfbox{#1.eps}%
+  \fi
+  %
+  \ifimagevmode
+    \medskip  % space after a standalone image
+  \fi  
+  \ifx\centersub\centerV \egroup \fi
+\endgroup}
+
+
+% @float FLOATTYPE,LABEL,LOC ... @end float for displayed figures, tables,
+% etc.  We don't actually implement floating yet, we always include the
+% float "here".  But it seemed the best name for the future.
+%
+\envparseargdef\float{\eatcommaspace\eatcommaspace\dofloat#1, , ,\finish}
+
+% There may be a space before second and/or third parameter; delete it.
+\def\eatcommaspace#1, {#1,}
+
+% #1 is the optional FLOATTYPE, the text label for this float, typically
+% "Figure", "Table", "Example", etc.  Can't contain commas.  If omitted,
+% this float will not be numbered and cannot be referred to.
+%
+% #2 is the optional xref label.  Also must be present for the float to
+% be referable.
+%
+% #3 is the optional positioning argument; for now, it is ignored.  It
+% will somehow specify the positions allowed to float to (here, top, bottom).
+%
+% We keep a separate counter for each FLOATTYPE, which we reset at each
+% chapter-level command.
+\let\resetallfloatnos=\empty
+%
+\def\dofloat#1,#2,#3,#4\finish{%
+  \let\thiscaption=\empty
+  \let\thisshortcaption=\empty
+  %
+  % don't lose footnotes inside @float.
+  %
+  % BEWARE: when the floats start float, we have to issue warning whenever an
+  % insert appears inside a float which could possibly float. --kasal, 26may04
+  %
+  \startsavinginserts
+  %
+  % We can't be used inside a paragraph.
+  \par
+  %
+  \vtop\bgroup
+    \def\floattype{#1}%
+    \def\floatlabel{#2}%
+    \def\floatloc{#3}% we do nothing with this yet.
+    %
+    \ifx\floattype\empty
+      \let\safefloattype=\empty
+    \else
+      {%
+        % the floattype might have accents or other special characters,
+        % but we need to use it in a control sequence name.
+        \indexnofonts
+        \turnoffactive
+        \xdef\safefloattype{\floattype}%
+      }%
+    \fi
+    %
+    % If label is given but no type, we handle that as the empty type.
+    \ifx\floatlabel\empty \else
+      % We want each FLOATTYPE to be numbered separately (Figure 1,
+      % Table 1, Figure 2, ...).  (And if no label, no number.)
+      %
+      \expandafter\getfloatno\csname\safefloattype floatno\endcsname
+      \global\advance\floatno by 1
+      %
+      {%
+        % This magic value for \lastsection is output by \setref as the
+        % XREFLABEL-title value.  \xrefX uses it to distinguish float
+        % labels (which have a completely different output format) from
+        % node and anchor labels.  And \xrdef uses it to construct the
+        % lists of floats.
+        %
+        \edef\lastsection{\floatmagic=\safefloattype}%
+        \setref{\floatlabel}{Yfloat}%
+      }%
+    \fi
+    %
+    % start with \parskip glue, I guess.
+    \vskip\parskip
+    %
+    % Don't suppress indentation if a float happens to start a section.
+    \restorefirstparagraphindent
+}
+
+% we have these possibilities:
+% @float Foo,lbl & @caption{Cap}: Foo 1.1: Cap
+% @float Foo,lbl & no caption:    Foo 1.1
+% @float Foo & @caption{Cap}:     Foo: Cap
+% @float Foo & no caption:        Foo
+% @float ,lbl & Caption{Cap}:     1.1: Cap
+% @float ,lbl & no caption:       1.1
+% @float & @caption{Cap}:         Cap
+% @float & no caption:
+%
+\def\Efloat{%
+    \let\floatident = \empty
+    %
+    % In all cases, if we have a float type, it comes first.
+    \ifx\floattype\empty \else \def\floatident{\floattype}\fi
+    %
+    % If we have an xref label, the number comes next.
+    \ifx\floatlabel\empty \else
+      \ifx\floattype\empty \else % if also had float type, need tie first.
+        \appendtomacro\floatident{\tie}%
+      \fi
+      % the number.
+      \appendtomacro\floatident{\chaplevelprefix\the\floatno}%
+    \fi
+    %
+    % Start the printed caption with what we've constructed in
+    % \floatident, but keep it separate; we need \floatident again.
+    \let\captionline = \floatident
+    %
+    \ifx\thiscaption\empty \else
+      \ifx\floatident\empty \else
+	\appendtomacro\captionline{: }% had ident, so need a colon between
+      \fi
+      %
+      % caption text.
+      \appendtomacro\captionline{\scanexp\thiscaption}%
+    \fi
+    %
+    % If we have anything to print, print it, with space before.
+    % Eventually this needs to become an \insert.
+    \ifx\captionline\empty \else
+      \vskip.5\parskip
+      \captionline
+      %
+      % Space below caption.
+      \vskip\parskip
+    \fi
+    %
+    % If have an xref label, write the list of floats info.  Do this
+    % after the caption, to avoid chance of it being a breakpoint.
+    \ifx\floatlabel\empty \else
+      % Write the text that goes in the lof to the aux file as
+      % \floatlabel-lof.  Besides \floatident, we include the short
+      % caption if specified, else the full caption if specified, else nothing.
+      {%
+        \requireauxfile
+        \atdummies
+        %
+        % since we read the caption text in the macro world, where ^^M
+        % is turned into a normal character, we have to scan it back, so
+        % we don't write the literal three characters "^^M" into the aux file.
+	\scanexp{%
+	  \xdef\noexpand\gtemp{%
+	    \ifx\thisshortcaption\empty
+	      \thiscaption
+	    \else
+	      \thisshortcaption
+	    \fi
+	  }%
+	}%
+        \immediate\write\auxfile{@xrdef{\floatlabel-lof}{\floatident
+	  \ifx\gtemp\empty \else : \gtemp \fi}}%
+      }%
+    \fi
+  \egroup  % end of \vtop
+  %
+  % place the captured inserts
+  %
+  % BEWARE: when the floats start floating, we have to issue warning
+  % whenever an insert appears inside a float which could possibly
+  % float. --kasal, 26may04
+  %
+  \checkinserts
+}
+
+% Append the tokens #2 to the definition of macro #1, not expanding either.
+%
+\def\appendtomacro#1#2{%
+  \expandafter\def\expandafter#1\expandafter{#1#2}%
+}
+
+% @caption, @shortcaption
+%
+\def\caption{\docaption\thiscaption}
+\def\shortcaption{\docaption\thisshortcaption}
+\def\docaption{\checkenv\float \bgroup\scanargctxt\defcaption}
+\def\defcaption#1#2{\egroup \def#1{#2}}
+
+% The parameter is the control sequence identifying the counter we are
+% going to use.  Create it if it doesn't exist and assign it to \floatno.
+\def\getfloatno#1{%
+  \ifx#1\relax
+      % Haven't seen this figure type before.
+      \csname newcount\endcsname #1%
+      %
+      % Remember to reset this floatno at the next chap.
+      \expandafter\gdef\expandafter\resetallfloatnos
+        \expandafter{\resetallfloatnos #1=0 }%
+  \fi
+  \let\floatno#1%
+}
+
+% \setref calls this to get the XREFLABEL-snt value.  We want an @xref
+% to the FLOATLABEL to expand to "Figure 3.1".  We call \setref when we
+% first read the @float command.
+%
+\def\Yfloat{\floattype@tie \chaplevelprefix\the\floatno}%
+
+% Magic string used for the XREFLABEL-title value, so \xrefX can
+% distinguish floats from other xref types.
+\def\floatmagic{!!float!!}
+
+% #1 is the control sequence we are passed; we expand into a conditional
+% which is true if #1 represents a float ref.  That is, the magic
+% \lastsection value which we \setref above.
+%
+\def\iffloat#1{\expandafter\doiffloat#1==\finish}
+%
+% #1 is (maybe) the \floatmagic string.  If so, #2 will be the
+% (safe) float type for this float.  We set \iffloattype to #2.
+%
+\def\doiffloat#1=#2=#3\finish{%
+  \def\temp{#1}%
+  \def\iffloattype{#2}%
+  \ifx\temp\floatmagic
+}
+
+% @listoffloats FLOATTYPE - print a list of floats like a table of contents.
+%
+\parseargdef\listoffloats{%
+  \def\floattype{#1}% floattype
+  {%
+    % the floattype might have accents or other special characters,
+    % but we need to use it in a control sequence name.
+    \indexnofonts
+    \turnoffactive
+    \xdef\safefloattype{\floattype}%
+  }%
+  %
+  % \xrdef saves the floats as a \do-list in \floatlistSAFEFLOATTYPE.
+  \expandafter\ifx\csname floatlist\safefloattype\endcsname \relax
+    \ifhavexrefs
+      % if the user said @listoffloats foo but never @float foo.
+      \message{\linenumber No `\safefloattype' floats to list.}%
+    \fi
+  \else
+    \begingroup
+      \leftskip=\tocindent  % indent these entries like a toc
+      \let\do=\listoffloatsdo
+      \csname floatlist\safefloattype\endcsname
+    \endgroup
+  \fi
+}
+
+% This is called on each entry in a list of floats.  We're passed the
+% xref label, in the form LABEL-title, which is how we save it in the
+% aux file.  We strip off the -title and look up \XRLABEL-lof, which
+% has the text we're supposed to typeset here.
+%
+% Figures without xref labels will not be included in the list (since
+% they won't appear in the aux file).
+%
+\def\listoffloatsdo#1{\listoffloatsdoentry#1\finish}
+\def\listoffloatsdoentry#1-title\finish{{%
+  % Can't fully expand XR#1-lof because it can contain anything.  Just
+  % pass the control sequence.  On the other hand, XR#1-pg is just the
+  % page number, and we want to fully expand that so we can get a link
+  % in pdf output.
+  \toksA = \expandafter{\csname XR#1-lof\endcsname}%
+  %
+  % use the same \entry macro we use to generate the TOC and index.
+  \edef\writeentry{\noexpand\entry{\the\toksA}{\csname XR#1-pg\endcsname}}%
+  \writeentry
+}}
+
+
+\message{localization,}
+
+% For single-language documents, @documentlanguage is usually given very
+% early, just after @documentencoding.  Single argument is the language
+% (de) or locale (de_DE) abbreviation.
+%
+{
+  \catcode`\_ = \active
+  \globaldefs=1
+\parseargdef\documentlanguage{%
+  \tex % read txi-??.tex file in plain TeX.
+    % Read the file by the name they passed if it exists.
+    \let_ = \normalunderscore  % normal _ character for filename test
+    \openin 1 txi-#1.tex
+    \ifeof 1
+      \documentlanguagetrywithoutunderscore #1_\finish
+    \else
+      \globaldefs = 1  % everything in the txi-LL files needs to persist
+      \input txi-#1.tex
+    \fi
+    \closein 1
+  \endgroup % end raw TeX
+}
+%
+% If they passed de_DE, and txi-de_DE.tex doesn't exist,
+% try txi-de.tex.
+%
+\gdef\documentlanguagetrywithoutunderscore#1_#2\finish{%
+  \openin 1 txi-#1.tex
+  \ifeof 1
+    \errhelp = \nolanghelp
+    \errmessage{Cannot read language file txi-#1.tex}%
+  \else
+    \globaldefs = 1  % everything in the txi-LL files needs to persist
+    \input txi-#1.tex
+  \fi
+  \closein 1
+}
+}% end of special _ catcode
+%
+\newhelp\nolanghelp{The given language definition file cannot be found or
+is empty.  Maybe you need to install it?  Putting it in the current
+directory should work if nowhere else does.}
+
+% This macro is called from txi-??.tex files; the first argument is the
+% \language name to set (without the "\lang@" prefix), the second and
+% third args are \{left,right}hyphenmin.
+%
+% The language names to pass are determined when the format is built.
+% See the etex.log file created at that time, e.g.,
+% /usr/local/texlive/2008/texmf-var/web2c/pdftex/etex.log.
+%
+% With TeX Live 2008, etex now includes hyphenation patterns for all
+% available languages.  This means we can support hyphenation in
+% Texinfo, at least to some extent.  (This still doesn't solve the
+% accented characters problem.)
+%
+\catcode`@=11
+\def\txisetlanguage#1#2#3{%
+  % do not set the language if the name is undefined in the current TeX.
+  \expandafter\ifx\csname lang@#1\endcsname \relax
+    \message{no patterns for #1}%
+  \else
+    \global\language = \csname lang@#1\endcsname
+  \fi
+  % but there is no harm in adjusting the hyphenmin values regardless.
+  \global\lefthyphenmin = #2\relax
+  \global\righthyphenmin = #3\relax
+}
+
+% Helpers for encodings.
+% Set the catcode of characters 128 through 255 to the specified number.
+%
+\def\setnonasciicharscatcode#1{%
+   \count255=128
+   \loop\ifnum\count255<256
+      \global\catcode\count255=#1\relax
+      \advance\count255 by 1
+   \repeat
+}
+
+\def\setnonasciicharscatcodenonglobal#1{%
+   \count255=128
+   \loop\ifnum\count255<256
+      \catcode\count255=#1\relax
+      \advance\count255 by 1
+   \repeat
+}
+
+% @documentencoding sets the definition of non-ASCII characters
+% according to the specified encoding.
+%
+\def\documentencoding{\parseargusing\filenamecatcodes\documentencodingzzz}
+\def\documentencodingzzz#1{%
+  % Encoding being declared for the document.
+  \def\declaredencoding{\csname #1.enc\endcsname}%
+  %
+  % Supported encodings: names converted to tokens in order to be able
+  % to compare them with \ifx.
+  \def\ascii{\csname US-ASCII.enc\endcsname}%
+  \def\latnine{\csname ISO-8859-15.enc\endcsname}%
+  \def\latone{\csname ISO-8859-1.enc\endcsname}%
+  \def\lattwo{\csname ISO-8859-2.enc\endcsname}%
+  \def\utfeight{\csname UTF-8.enc\endcsname}%
+  %
+  \ifx \declaredencoding \ascii
+     \asciichardefs
+  %
+  \else \ifx \declaredencoding \lattwo
+     \setnonasciicharscatcode\active
+     \lattwochardefs
+  %
+  \else \ifx \declaredencoding \latone
+     \setnonasciicharscatcode\active
+     \latonechardefs
+  %
+  \else \ifx \declaredencoding \latnine
+     \setnonasciicharscatcode\active
+     \latninechardefs
+  %
+  \else \ifx \declaredencoding \utfeight
+     \setnonasciicharscatcode\active
+     % since we already invoked \utfeightchardefs at the top level
+     % (below), do not re-invoke it, then our check for duplicated
+     % definitions triggers.  Making non-ascii chars active is enough.
+  %
+  \else
+    \message{Ignoring unknown document encoding: #1.}%
+  %
+  \fi % utfeight
+  \fi % latnine
+  \fi % latone
+  \fi % lattwo
+  \fi % ascii
+}
+
+% emacs-page
+% A message to be logged when using a character that isn't available
+% the default font encoding (OT1).
+%
+\def\missingcharmsg#1{\message{Character missing, sorry: #1.}}
+
+% Take account of \c (plain) vs. \, (Texinfo) difference.
+\def\cedilla#1{\ifx\c\ptexc\c{#1}\else\,{#1}\fi}
+
+% First, make active non-ASCII characters in order for them to be
+% correctly categorized when TeX reads the replacement text of
+% macros containing the character definitions.
+\setnonasciicharscatcode\active
+%
+% Latin1 (ISO-8859-1) character definitions.
+\def\latonechardefs{%
+  \gdef^^a0{\tie}
+  \gdef^^a1{\exclamdown}
+  \gdef^^a2{{\tcfont \char162}} % cent
+  \gdef^^a3{\pounds}
+  \gdef^^a4{{\tcfont \char164}} % currency
+  \gdef^^a5{{\tcfont \char165}} % yen
+  \gdef^^a6{{\tcfont \char166}} % broken bar
+  \gdef^^a7{\S}
+  \gdef^^a8{\"{}}
+  \gdef^^a9{\copyright}
+  \gdef^^aa{\ordf}
+  \gdef^^ab{\guillemetleft}
+  \gdef^^ac{\ensuremath\lnot}
+  \gdef^^ad{\-}
+  \gdef^^ae{\registeredsymbol}
+  \gdef^^af{\={}}
+  %
+  \gdef^^b0{\textdegree}
+  \gdef^^b1{$\pm$}
+  \gdef^^b2{$^2$}
+  \gdef^^b3{$^3$}
+  \gdef^^b4{\'{}}
+  \gdef^^b5{$\mu$}
+  \gdef^^b6{\P}
+  \gdef^^b7{\ensuremath\cdot}
+  \gdef^^b8{\cedilla\ }
+  \gdef^^b9{$^1$}
+  \gdef^^ba{\ordm}
+  \gdef^^bb{\guillemetright}
+  \gdef^^bc{$1\over4$}
+  \gdef^^bd{$1\over2$}
+  \gdef^^be{$3\over4$}
+  \gdef^^bf{\questiondown}
+  %
+  \gdef^^c0{\`A}
+  \gdef^^c1{\'A}
+  \gdef^^c2{\^A}
+  \gdef^^c3{\~A}
+  \gdef^^c4{\"A}
+  \gdef^^c5{\ringaccent A}
+  \gdef^^c6{\AE}
+  \gdef^^c7{\cedilla C}
+  \gdef^^c8{\`E}
+  \gdef^^c9{\'E}
+  \gdef^^ca{\^E}
+  \gdef^^cb{\"E}
+  \gdef^^cc{\`I}
+  \gdef^^cd{\'I}
+  \gdef^^ce{\^I}
+  \gdef^^cf{\"I}
+  %
+  \gdef^^d0{\DH}
+  \gdef^^d1{\~N}
+  \gdef^^d2{\`O}
+  \gdef^^d3{\'O}
+  \gdef^^d4{\^O}
+  \gdef^^d5{\~O}
+  \gdef^^d6{\"O}
+  \gdef^^d7{$\times$}
+  \gdef^^d8{\O}
+  \gdef^^d9{\`U}
+  \gdef^^da{\'U}
+  \gdef^^db{\^U}
+  \gdef^^dc{\"U}
+  \gdef^^dd{\'Y}
+  \gdef^^de{\TH}
+  \gdef^^df{\ss}
+  %
+  \gdef^^e0{\`a}
+  \gdef^^e1{\'a}
+  \gdef^^e2{\^a}
+  \gdef^^e3{\~a}
+  \gdef^^e4{\"a}
+  \gdef^^e5{\ringaccent a}
+  \gdef^^e6{\ae}
+  \gdef^^e7{\cedilla c}
+  \gdef^^e8{\`e}
+  \gdef^^e9{\'e}
+  \gdef^^ea{\^e}
+  \gdef^^eb{\"e}
+  \gdef^^ec{\`{\dotless i}}
+  \gdef^^ed{\'{\dotless i}}
+  \gdef^^ee{\^{\dotless i}}
+  \gdef^^ef{\"{\dotless i}}
+  %
+  \gdef^^f0{\dh}
+  \gdef^^f1{\~n}
+  \gdef^^f2{\`o}
+  \gdef^^f3{\'o}
+  \gdef^^f4{\^o}
+  \gdef^^f5{\~o}
+  \gdef^^f6{\"o}
+  \gdef^^f7{$\div$}
+  \gdef^^f8{\o}
+  \gdef^^f9{\`u}
+  \gdef^^fa{\'u}
+  \gdef^^fb{\^u}
+  \gdef^^fc{\"u}
+  \gdef^^fd{\'y}
+  \gdef^^fe{\th}
+  \gdef^^ff{\"y}
+}
+
+% Latin9 (ISO-8859-15) encoding character definitions.
+\def\latninechardefs{%
+  % Encoding is almost identical to Latin1.
+  \latonechardefs
+  %
+  \gdef^^a4{\euro}
+  \gdef^^a6{\v S}
+  \gdef^^a8{\v s}
+  \gdef^^b4{\v Z}
+  \gdef^^b8{\v z}
+  \gdef^^bc{\OE}
+  \gdef^^bd{\oe}
+  \gdef^^be{\"Y}
+}
+
+% Latin2 (ISO-8859-2) character definitions.
+\def\lattwochardefs{%
+  \gdef^^a0{\tie}
+  \gdef^^a1{\ogonek{A}}
+  \gdef^^a2{\u{}}
+  \gdef^^a3{\L}
+  \gdef^^a4{\missingcharmsg{CURRENCY SIGN}}
+  \gdef^^a5{\v L}
+  \gdef^^a6{\'S}
+  \gdef^^a7{\S}
+  \gdef^^a8{\"{}}
+  \gdef^^a9{\v S}
+  \gdef^^aa{\cedilla S}
+  \gdef^^ab{\v T}
+  \gdef^^ac{\'Z}
+  \gdef^^ad{\-}
+  \gdef^^ae{\v Z}
+  \gdef^^af{\dotaccent Z}
+  %
+  \gdef^^b0{\textdegree}
+  \gdef^^b1{\ogonek{a}}
+  \gdef^^b2{\ogonek{ }}
+  \gdef^^b3{\l}
+  \gdef^^b4{\'{}}
+  \gdef^^b5{\v l}
+  \gdef^^b6{\'s}
+  \gdef^^b7{\v{}}
+  \gdef^^b8{\cedilla\ }
+  \gdef^^b9{\v s}
+  \gdef^^ba{\cedilla s}
+  \gdef^^bb{\v t}
+  \gdef^^bc{\'z}
+  \gdef^^bd{\H{}}
+  \gdef^^be{\v z}
+  \gdef^^bf{\dotaccent z}
+  %
+  \gdef^^c0{\'R}
+  \gdef^^c1{\'A}
+  \gdef^^c2{\^A}
+  \gdef^^c3{\u A}
+  \gdef^^c4{\"A}
+  \gdef^^c5{\'L}
+  \gdef^^c6{\'C}
+  \gdef^^c7{\cedilla C}
+  \gdef^^c8{\v C}
+  \gdef^^c9{\'E}
+  \gdef^^ca{\ogonek{E}}
+  \gdef^^cb{\"E}
+  \gdef^^cc{\v E}
+  \gdef^^cd{\'I}
+  \gdef^^ce{\^I}
+  \gdef^^cf{\v D}
+  %
+  \gdef^^d0{\DH}
+  \gdef^^d1{\'N}
+  \gdef^^d2{\v N}
+  \gdef^^d3{\'O}
+  \gdef^^d4{\^O}
+  \gdef^^d5{\H O}
+  \gdef^^d6{\"O}
+  \gdef^^d7{$\times$}
+  \gdef^^d8{\v R}
+  \gdef^^d9{\ringaccent U}
+  \gdef^^da{\'U}
+  \gdef^^db{\H U}
+  \gdef^^dc{\"U}
+  \gdef^^dd{\'Y}
+  \gdef^^de{\cedilla T}
+  \gdef^^df{\ss}
+  %
+  \gdef^^e0{\'r}
+  \gdef^^e1{\'a}
+  \gdef^^e2{\^a}
+  \gdef^^e3{\u a}
+  \gdef^^e4{\"a}
+  \gdef^^e5{\'l}
+  \gdef^^e6{\'c}
+  \gdef^^e7{\cedilla c}
+  \gdef^^e8{\v c}
+  \gdef^^e9{\'e}
+  \gdef^^ea{\ogonek{e}}
+  \gdef^^eb{\"e}
+  \gdef^^ec{\v e}
+  \gdef^^ed{\'{\dotless{i}}}
+  \gdef^^ee{\^{\dotless{i}}}
+  \gdef^^ef{\v d}
+  %
+  \gdef^^f0{\dh}
+  \gdef^^f1{\'n}
+  \gdef^^f2{\v n}
+  \gdef^^f3{\'o}
+  \gdef^^f4{\^o}
+  \gdef^^f5{\H o}
+  \gdef^^f6{\"o}
+  \gdef^^f7{$\div$}
+  \gdef^^f8{\v r}
+  \gdef^^f9{\ringaccent u}
+  \gdef^^fa{\'u}
+  \gdef^^fb{\H u}
+  \gdef^^fc{\"u}
+  \gdef^^fd{\'y}
+  \gdef^^fe{\cedilla t}
+  \gdef^^ff{\dotaccent{}}
+}
+
+% UTF-8 character definitions.
+%
+% This code to support UTF-8 is based on LaTeX's utf8.def, with some
+% changes for Texinfo conventions.  It is included here under the GPL by
+% permission from Frank Mittelbach and the LaTeX team.
+%
+\newcount\countUTFx
+\newcount\countUTFy
+\newcount\countUTFz
+
+\gdef\UTFviiiTwoOctets#1#2{\expandafter
+   \UTFviiiDefined\csname u8:#1\string #2\endcsname}
+%
+\gdef\UTFviiiThreeOctets#1#2#3{\expandafter
+   \UTFviiiDefined\csname u8:#1\string #2\string #3\endcsname}
+%
+\gdef\UTFviiiFourOctets#1#2#3#4{\expandafter
+   \UTFviiiDefined\csname u8:#1\string #2\string #3\string #4\endcsname}
+
+\gdef\UTFviiiDefined#1{%
+  \ifx #1\relax
+    \message{\linenumber Unicode char \string #1 not defined for Texinfo}%
+  \else
+    \expandafter #1%
+  \fi
+}
+
+\begingroup
+  \catcode`\~13
+  \catcode`\"12
+
+  \def\UTFviiiLoop{%
+    \global\catcode\countUTFx\active
+    \uccode`\~\countUTFx
+    \uppercase\expandafter{\UTFviiiTmp}%
+    \advance\countUTFx by 1
+    \ifnum\countUTFx < \countUTFy
+      \expandafter\UTFviiiLoop
+    \fi}
+
+  \countUTFx = "C2
+  \countUTFy = "E0
+  \def\UTFviiiTmp{%
+    \xdef~{\noexpand\UTFviiiTwoOctets\string~}}
+  \UTFviiiLoop
+
+  \countUTFx = "E0
+  \countUTFy = "F0
+  \def\UTFviiiTmp{%
+    \xdef~{\noexpand\UTFviiiThreeOctets\string~}}
+  \UTFviiiLoop
+
+  \countUTFx = "F0
+  \countUTFy = "F4
+  \def\UTFviiiTmp{%
+    \xdef~{\noexpand\UTFviiiFourOctets\string~}}
+  \UTFviiiLoop
+\endgroup
+
+\def\globallet{\global\let} % save some \expandafter's below
+
+% @U{xxxx} to produce U+xxxx, if we support it.
+\def\U#1{%
+  \expandafter\ifx\csname uni:#1\endcsname \relax
+    \errhelp = \EMsimple	
+    \errmessage{Unicode character U+#1 not supported, sorry}%
+  \else
+    \csname uni:#1\endcsname
+  \fi
+}
+
+\begingroup
+  \catcode`\"=12
+  \catcode`\<=12
+  \catcode`\.=12
+  \catcode`\,=12
+  \catcode`\;=12
+  \catcode`\!=12
+  \catcode`\~=13
+  \gdef\DeclareUnicodeCharacter#1#2{%
+    \countUTFz = "#1\relax
+    %\wlog{\space\space defining Unicode char U+#1 (decimal \the\countUTFz)}%
+    \begingroup
+      \parseXMLCharref
+      \def\UTFviiiTwoOctets##1##2{%
+        \csname u8:##1\string ##2\endcsname}%
+      \def\UTFviiiThreeOctets##1##2##3{%
+        \csname u8:##1\string ##2\string ##3\endcsname}%
+      \def\UTFviiiFourOctets##1##2##3##4{%
+        \csname u8:##1\string ##2\string ##3\string ##4\endcsname}%
+      \expandafter\expandafter\expandafter\expandafter
+       \expandafter\expandafter\expandafter
+       \gdef\UTFviiiTmp{#2}%
+      % 
+      \expandafter\ifx\csname uni:#1\endcsname \relax \else
+       \message{Internal error, already defined: #1}%
+      \fi
+      %
+      % define an additional control sequence for this code point.
+      \expandafter\globallet\csname uni:#1\endcsname \UTFviiiTmp
+    \endgroup}
+
+  \gdef\parseXMLCharref{%
+    \ifnum\countUTFz < "A0\relax
+      \errhelp = \EMsimple
+      \errmessage{Cannot define Unicode char value < 00A0}%
+    \else\ifnum\countUTFz < "800\relax
+      \parseUTFviiiA,%
+      \parseUTFviiiB C\UTFviiiTwoOctets.,%
+    \else\ifnum\countUTFz < "10000\relax
+      \parseUTFviiiA;%
+      \parseUTFviiiA,%
+      \parseUTFviiiB E\UTFviiiThreeOctets.{,;}%
+    \else
+      \parseUTFviiiA;%
+      \parseUTFviiiA,%
+      \parseUTFviiiA!%
+      \parseUTFviiiB F\UTFviiiFourOctets.{!,;}%
+    \fi\fi\fi
+  }
+
+  \gdef\parseUTFviiiA#1{%
+    \countUTFx = \countUTFz
+    \divide\countUTFz by 64
+    \countUTFy = \countUTFz
+    \multiply\countUTFz by 64
+    \advance\countUTFx by -\countUTFz
+    \advance\countUTFx by 128
+    \uccode `#1\countUTFx
+    \countUTFz = \countUTFy}
+
+  \gdef\parseUTFviiiB#1#2#3#4{%
+    \advance\countUTFz by "#10\relax
+    \uccode `#3\countUTFz
+    \uppercase{\gdef\UTFviiiTmp{#2#3#4}}}
+\endgroup
+
+% https://en.wikipedia.org/wiki/Plane_(Unicode)#Basic_M
+% U+0000..U+007F = https://en.wikipedia.org/wiki/Basic_Latin_(Unicode_block)
+% U+0080..U+00FF = https://en.wikipedia.org/wiki/Latin-1_Supplement_(Unicode_block)
+% U+0100..U+017F = https://en.wikipedia.org/wiki/Latin_Extended-A
+% U+0180..U+024F = https://en.wikipedia.org/wiki/Latin_Extended-B
+% 
+% Many of our renditions are less than wonderful, and all the missing
+% characters are available somewhere.  Loading the necessary fonts
+% awaits user request.  We can't truly support Unicode without
+% reimplementing everything that's been done in LaTeX for many years,
+% plus probably using luatex or xetex, and who knows what else.
+% We won't be doing that here in this simple file.  But we can try to at
+% least make most of the characters not bomb out.
+%
+\def\utfeightchardefs{%
+  \DeclareUnicodeCharacter{00A0}{\tie}
+  \DeclareUnicodeCharacter{00A1}{\exclamdown}
+  \DeclareUnicodeCharacter{00A2}{{\tcfont \char162}}% 0242=cent
+  \DeclareUnicodeCharacter{00A3}{\pounds}
+  \DeclareUnicodeCharacter{00A4}{{\tcfont \char164}}% 0244=currency
+  \DeclareUnicodeCharacter{00A5}{{\tcfont \char165}}% 0245=yen
+  \DeclareUnicodeCharacter{00A6}{{\tcfont \char166}}% 0246=brokenbar
+  \DeclareUnicodeCharacter{00A7}{\S}
+  \DeclareUnicodeCharacter{00A8}{\"{ }}
+  \DeclareUnicodeCharacter{00A9}{\copyright}
+  \DeclareUnicodeCharacter{00AA}{\ordf}
+  \DeclareUnicodeCharacter{00AB}{\guillemetleft}
+  \DeclareUnicodeCharacter{00AC}{\ensuremath\lnot}
+  \DeclareUnicodeCharacter{00AD}{\-}
+  \DeclareUnicodeCharacter{00AE}{\registeredsymbol}
+  \DeclareUnicodeCharacter{00AF}{\={ }}
+
+  \DeclareUnicodeCharacter{00B0}{\ringaccent{ }}
+  \DeclareUnicodeCharacter{00B1}{\ensuremath\pm}
+  \DeclareUnicodeCharacter{00B2}{$^2$}
+  \DeclareUnicodeCharacter{00B3}{$^3$}
+  \DeclareUnicodeCharacter{00B4}{\'{ }}
+  \DeclareUnicodeCharacter{00B5}{$\mu$}
+  \DeclareUnicodeCharacter{00B6}{\P}
+  \DeclareUnicodeCharacter{00B7}{\ensuremath\cdot}
+  \DeclareUnicodeCharacter{00B8}{\cedilla{ }}
+  \DeclareUnicodeCharacter{00B9}{$^1$}
+  \DeclareUnicodeCharacter{00BA}{\ordm}
+  \DeclareUnicodeCharacter{00BB}{\guillemetright}
+  \DeclareUnicodeCharacter{00BC}{$1\over4$}
+  \DeclareUnicodeCharacter{00BD}{$1\over2$}
+  \DeclareUnicodeCharacter{00BE}{$3\over4$}
+  \DeclareUnicodeCharacter{00BF}{\questiondown}
+
+  \DeclareUnicodeCharacter{00C0}{\`A}
+  \DeclareUnicodeCharacter{00C1}{\'A}
+  \DeclareUnicodeCharacter{00C2}{\^A}
+  \DeclareUnicodeCharacter{00C3}{\~A}
+  \DeclareUnicodeCharacter{00C4}{\"A}
+  \DeclareUnicodeCharacter{00C5}{\AA}
+  \DeclareUnicodeCharacter{00C6}{\AE}
+  \DeclareUnicodeCharacter{00C7}{\cedilla{C}}
+  \DeclareUnicodeCharacter{00C8}{\`E}
+  \DeclareUnicodeCharacter{00C9}{\'E}
+  \DeclareUnicodeCharacter{00CA}{\^E}
+  \DeclareUnicodeCharacter{00CB}{\"E}
+  \DeclareUnicodeCharacter{00CC}{\`I}
+  \DeclareUnicodeCharacter{00CD}{\'I}
+  \DeclareUnicodeCharacter{00CE}{\^I}
+  \DeclareUnicodeCharacter{00CF}{\"I}
+
+  \DeclareUnicodeCharacter{00D0}{\DH}
+  \DeclareUnicodeCharacter{00D1}{\~N}
+  \DeclareUnicodeCharacter{00D2}{\`O}
+  \DeclareUnicodeCharacter{00D3}{\'O}
+  \DeclareUnicodeCharacter{00D4}{\^O}
+  \DeclareUnicodeCharacter{00D5}{\~O}
+  \DeclareUnicodeCharacter{00D6}{\"O}
+  \DeclareUnicodeCharacter{00D7}{\ensuremath\times}
+  \DeclareUnicodeCharacter{00D8}{\O}
+  \DeclareUnicodeCharacter{00D9}{\`U}
+  \DeclareUnicodeCharacter{00DA}{\'U}
+  \DeclareUnicodeCharacter{00DB}{\^U}
+  \DeclareUnicodeCharacter{00DC}{\"U}
+  \DeclareUnicodeCharacter{00DD}{\'Y}
+  \DeclareUnicodeCharacter{00DE}{\TH}
+  \DeclareUnicodeCharacter{00DF}{\ss}
+
+  \DeclareUnicodeCharacter{00E0}{\`a}
+  \DeclareUnicodeCharacter{00E1}{\'a}
+  \DeclareUnicodeCharacter{00E2}{\^a}
+  \DeclareUnicodeCharacter{00E3}{\~a}
+  \DeclareUnicodeCharacter{00E4}{\"a}
+  \DeclareUnicodeCharacter{00E5}{\aa}
+  \DeclareUnicodeCharacter{00E6}{\ae}
+  \DeclareUnicodeCharacter{00E7}{\cedilla{c}}
+  \DeclareUnicodeCharacter{00E8}{\`e}
+  \DeclareUnicodeCharacter{00E9}{\'e}
+  \DeclareUnicodeCharacter{00EA}{\^e}
+  \DeclareUnicodeCharacter{00EB}{\"e}
+  \DeclareUnicodeCharacter{00EC}{\`{\dotless{i}}}
+  \DeclareUnicodeCharacter{00ED}{\'{\dotless{i}}}
+  \DeclareUnicodeCharacter{00EE}{\^{\dotless{i}}}
+  \DeclareUnicodeCharacter{00EF}{\"{\dotless{i}}}
+
+  \DeclareUnicodeCharacter{00F0}{\dh}
+  \DeclareUnicodeCharacter{00F1}{\~n}
+  \DeclareUnicodeCharacter{00F2}{\`o}
+  \DeclareUnicodeCharacter{00F3}{\'o}
+  \DeclareUnicodeCharacter{00F4}{\^o}
+  \DeclareUnicodeCharacter{00F5}{\~o}
+  \DeclareUnicodeCharacter{00F6}{\"o}
+  \DeclareUnicodeCharacter{00F7}{\ensuremath\div}
+  \DeclareUnicodeCharacter{00F8}{\o}
+  \DeclareUnicodeCharacter{00F9}{\`u}
+  \DeclareUnicodeCharacter{00FA}{\'u}
+  \DeclareUnicodeCharacter{00FB}{\^u}
+  \DeclareUnicodeCharacter{00FC}{\"u}
+  \DeclareUnicodeCharacter{00FD}{\'y}
+  \DeclareUnicodeCharacter{00FE}{\th}
+  \DeclareUnicodeCharacter{00FF}{\"y}
+
+  \DeclareUnicodeCharacter{0100}{\=A}
+  \DeclareUnicodeCharacter{0101}{\=a}
+  \DeclareUnicodeCharacter{0102}{\u{A}}
+  \DeclareUnicodeCharacter{0103}{\u{a}}
+  \DeclareUnicodeCharacter{0104}{\ogonek{A}}
+  \DeclareUnicodeCharacter{0105}{\ogonek{a}}
+  \DeclareUnicodeCharacter{0106}{\'C}
+  \DeclareUnicodeCharacter{0107}{\'c}
+  \DeclareUnicodeCharacter{0108}{\^C}
+  \DeclareUnicodeCharacter{0109}{\^c}
+  \DeclareUnicodeCharacter{010A}{\dotaccent{C}}
+  \DeclareUnicodeCharacter{010B}{\dotaccent{c}}
+  \DeclareUnicodeCharacter{010C}{\v{C}}
+  \DeclareUnicodeCharacter{010D}{\v{c}}
+  \DeclareUnicodeCharacter{010E}{\v{D}}
+  \DeclareUnicodeCharacter{010F}{d'}
+
+  \DeclareUnicodeCharacter{0110}{\DH}
+  \DeclareUnicodeCharacter{0111}{\dh}
+  \DeclareUnicodeCharacter{0112}{\=E}
+  \DeclareUnicodeCharacter{0113}{\=e}
+  \DeclareUnicodeCharacter{0114}{\u{E}}
+  \DeclareUnicodeCharacter{0115}{\u{e}}
+  \DeclareUnicodeCharacter{0116}{\dotaccent{E}}
+  \DeclareUnicodeCharacter{0117}{\dotaccent{e}}
+  \DeclareUnicodeCharacter{0118}{\ogonek{E}}
+  \DeclareUnicodeCharacter{0119}{\ogonek{e}}
+  \DeclareUnicodeCharacter{011A}{\v{E}}
+  \DeclareUnicodeCharacter{011B}{\v{e}}
+  \DeclareUnicodeCharacter{011C}{\^G}
+  \DeclareUnicodeCharacter{011D}{\^g}
+  \DeclareUnicodeCharacter{011E}{\u{G}}
+  \DeclareUnicodeCharacter{011F}{\u{g}}
+
+  \DeclareUnicodeCharacter{0120}{\dotaccent{G}}
+  \DeclareUnicodeCharacter{0121}{\dotaccent{g}}
+  \DeclareUnicodeCharacter{0122}{\cedilla{G}}
+  \DeclareUnicodeCharacter{0123}{\cedilla{g}}
+  \DeclareUnicodeCharacter{0124}{\^H}
+  \DeclareUnicodeCharacter{0125}{\^h}
+  \DeclareUnicodeCharacter{0126}{\missingcharmsg{H WITH STROKE}}
+  \DeclareUnicodeCharacter{0127}{\missingcharmsg{h WITH STROKE}}
+  \DeclareUnicodeCharacter{0128}{\~I}
+  \DeclareUnicodeCharacter{0129}{\~{\dotless{i}}}
+  \DeclareUnicodeCharacter{012A}{\=I}
+  \DeclareUnicodeCharacter{012B}{\={\dotless{i}}}
+  \DeclareUnicodeCharacter{012C}{\u{I}}
+  \DeclareUnicodeCharacter{012D}{\u{\dotless{i}}}
+  \DeclareUnicodeCharacter{012E}{\ogonek{I}}
+  \DeclareUnicodeCharacter{012F}{\ogonek{i}}
+
+  \DeclareUnicodeCharacter{0130}{\dotaccent{I}}
+  \DeclareUnicodeCharacter{0131}{\dotless{i}}
+  \DeclareUnicodeCharacter{0132}{IJ}
+  \DeclareUnicodeCharacter{0133}{ij}
+  \DeclareUnicodeCharacter{0134}{\^J}
+  \DeclareUnicodeCharacter{0135}{\^{\dotless{j}}}
+  \DeclareUnicodeCharacter{0136}{\cedilla{K}}
+  \DeclareUnicodeCharacter{0137}{\cedilla{k}}
+  \DeclareUnicodeCharacter{0138}{\ensuremath\kappa}  
+  \DeclareUnicodeCharacter{0139}{\'L}
+  \DeclareUnicodeCharacter{013A}{\'l}
+  \DeclareUnicodeCharacter{013B}{\cedilla{L}}
+  \DeclareUnicodeCharacter{013C}{\cedilla{l}}
+  \DeclareUnicodeCharacter{013D}{L'}% should kern
+  \DeclareUnicodeCharacter{013E}{l'}% should kern
+  \DeclareUnicodeCharacter{013F}{L\U{00B7}}
+
+  \DeclareUnicodeCharacter{0140}{l\U{00B7}}
+  \DeclareUnicodeCharacter{0141}{\L}
+  \DeclareUnicodeCharacter{0142}{\l}
+  \DeclareUnicodeCharacter{0143}{\'N}
+  \DeclareUnicodeCharacter{0144}{\'n}
+  \DeclareUnicodeCharacter{0145}{\cedilla{N}}
+  \DeclareUnicodeCharacter{0146}{\cedilla{n}}
+  \DeclareUnicodeCharacter{0147}{\v{N}}
+  \DeclareUnicodeCharacter{0148}{\v{n}}
+  \DeclareUnicodeCharacter{0149}{'n}
+  \DeclareUnicodeCharacter{014A}{\missingcharmsg{ENG}}
+  \DeclareUnicodeCharacter{014B}{\missingcharmsg{eng}}
+  \DeclareUnicodeCharacter{014C}{\=O}
+  \DeclareUnicodeCharacter{014D}{\=o}
+  \DeclareUnicodeCharacter{014E}{\u{O}}
+  \DeclareUnicodeCharacter{014F}{\u{o}}
+
+  \DeclareUnicodeCharacter{0150}{\H{O}}
+  \DeclareUnicodeCharacter{0151}{\H{o}}
+  \DeclareUnicodeCharacter{0152}{\OE}
+  \DeclareUnicodeCharacter{0153}{\oe}
+  \DeclareUnicodeCharacter{0154}{\'R}
+  \DeclareUnicodeCharacter{0155}{\'r}
+  \DeclareUnicodeCharacter{0156}{\cedilla{R}}
+  \DeclareUnicodeCharacter{0157}{\cedilla{r}}
+  \DeclareUnicodeCharacter{0158}{\v{R}}
+  \DeclareUnicodeCharacter{0159}{\v{r}}
+  \DeclareUnicodeCharacter{015A}{\'S}
+  \DeclareUnicodeCharacter{015B}{\'s}
+  \DeclareUnicodeCharacter{015C}{\^S}
+  \DeclareUnicodeCharacter{015D}{\^s}
+  \DeclareUnicodeCharacter{015E}{\cedilla{S}}
+  \DeclareUnicodeCharacter{015F}{\cedilla{s}}
+
+  \DeclareUnicodeCharacter{0160}{\v{S}}
+  \DeclareUnicodeCharacter{0161}{\v{s}}
+  \DeclareUnicodeCharacter{0162}{\cedilla{T}}
+  \DeclareUnicodeCharacter{0163}{\cedilla{t}}
+  \DeclareUnicodeCharacter{0164}{\v{T}}
+  \DeclareUnicodeCharacter{0165}{\v{t}}
+  \DeclareUnicodeCharacter{0166}{\missingcharmsg{H WITH STROKE}}
+  \DeclareUnicodeCharacter{0167}{\missingcharmsg{h WITH STROKE}}
+  \DeclareUnicodeCharacter{0168}{\~U}
+  \DeclareUnicodeCharacter{0169}{\~u}
+  \DeclareUnicodeCharacter{016A}{\=U}
+  \DeclareUnicodeCharacter{016B}{\=u}
+  \DeclareUnicodeCharacter{016C}{\u{U}}
+  \DeclareUnicodeCharacter{016D}{\u{u}}
+  \DeclareUnicodeCharacter{016E}{\ringaccent{U}}
+  \DeclareUnicodeCharacter{016F}{\ringaccent{u}}
+
+  \DeclareUnicodeCharacter{0170}{\H{U}}
+  \DeclareUnicodeCharacter{0171}{\H{u}}
+  \DeclareUnicodeCharacter{0172}{\ogonek{U}}
+  \DeclareUnicodeCharacter{0173}{\ogonek{u}}
+  \DeclareUnicodeCharacter{0174}{\^W}
+  \DeclareUnicodeCharacter{0175}{\^w}
+  \DeclareUnicodeCharacter{0176}{\^Y}
+  \DeclareUnicodeCharacter{0177}{\^y}
+  \DeclareUnicodeCharacter{0178}{\"Y}
+  \DeclareUnicodeCharacter{0179}{\'Z}
+  \DeclareUnicodeCharacter{017A}{\'z}
+  \DeclareUnicodeCharacter{017B}{\dotaccent{Z}}
+  \DeclareUnicodeCharacter{017C}{\dotaccent{z}}
+  \DeclareUnicodeCharacter{017D}{\v{Z}}
+  \DeclareUnicodeCharacter{017E}{\v{z}}
+  \DeclareUnicodeCharacter{017F}{\missingcharmsg{LONG S}}
+
+  \DeclareUnicodeCharacter{01C4}{D\v{Z}}
+  \DeclareUnicodeCharacter{01C5}{D\v{z}}
+  \DeclareUnicodeCharacter{01C6}{d\v{z}}
+  \DeclareUnicodeCharacter{01C7}{LJ}
+  \DeclareUnicodeCharacter{01C8}{Lj}
+  \DeclareUnicodeCharacter{01C9}{lj}
+  \DeclareUnicodeCharacter{01CA}{NJ}
+  \DeclareUnicodeCharacter{01CB}{Nj}
+  \DeclareUnicodeCharacter{01CC}{nj}
+  \DeclareUnicodeCharacter{01CD}{\v{A}}
+  \DeclareUnicodeCharacter{01CE}{\v{a}}
+  \DeclareUnicodeCharacter{01CF}{\v{I}}
+
+  \DeclareUnicodeCharacter{01D0}{\v{\dotless{i}}}
+  \DeclareUnicodeCharacter{01D1}{\v{O}}
+  \DeclareUnicodeCharacter{01D2}{\v{o}}
+  \DeclareUnicodeCharacter{01D3}{\v{U}}
+  \DeclareUnicodeCharacter{01D4}{\v{u}}
+
+  \DeclareUnicodeCharacter{01E2}{\={\AE}}
+  \DeclareUnicodeCharacter{01E3}{\={\ae}}
+  \DeclareUnicodeCharacter{01E6}{\v{G}}
+  \DeclareUnicodeCharacter{01E7}{\v{g}}
+  \DeclareUnicodeCharacter{01E8}{\v{K}}
+  \DeclareUnicodeCharacter{01E9}{\v{k}}
+
+  \DeclareUnicodeCharacter{01F0}{\v{\dotless{j}}}
+  \DeclareUnicodeCharacter{01F1}{DZ}
+  \DeclareUnicodeCharacter{01F2}{Dz}
+  \DeclareUnicodeCharacter{01F3}{dz}
+  \DeclareUnicodeCharacter{01F4}{\'G}
+  \DeclareUnicodeCharacter{01F5}{\'g}
+  \DeclareUnicodeCharacter{01F8}{\`N}
+  \DeclareUnicodeCharacter{01F9}{\`n}
+  \DeclareUnicodeCharacter{01FC}{\'{\AE}}
+  \DeclareUnicodeCharacter{01FD}{\'{\ae}}
+  \DeclareUnicodeCharacter{01FE}{\'{\O}}
+  \DeclareUnicodeCharacter{01FF}{\'{\o}}
+
+  \DeclareUnicodeCharacter{021E}{\v{H}}
+  \DeclareUnicodeCharacter{021F}{\v{h}}
+
+  \DeclareUnicodeCharacter{0226}{\dotaccent{A}}
+  \DeclareUnicodeCharacter{0227}{\dotaccent{a}}
+  \DeclareUnicodeCharacter{0228}{\cedilla{E}}
+  \DeclareUnicodeCharacter{0229}{\cedilla{e}}
+  \DeclareUnicodeCharacter{022E}{\dotaccent{O}}
+  \DeclareUnicodeCharacter{022F}{\dotaccent{o}}
+
+  \DeclareUnicodeCharacter{0232}{\=Y}
+  \DeclareUnicodeCharacter{0233}{\=y}
+  \DeclareUnicodeCharacter{0237}{\dotless{j}}
+
+  \DeclareUnicodeCharacter{02DB}{\ogonek{ }}
+
+  % Greek letters upper case
+  \DeclareUnicodeCharacter{0391}{{\it A}}
+  \DeclareUnicodeCharacter{0392}{{\it B}}
+  \DeclareUnicodeCharacter{0393}{\ensuremath{\mit\Gamma}}
+  \DeclareUnicodeCharacter{0394}{\ensuremath{\mit\Delta}}
+  \DeclareUnicodeCharacter{0395}{{\it E}}
+  \DeclareUnicodeCharacter{0396}{{\it Z}}
+  \DeclareUnicodeCharacter{0397}{{\it H}}
+  \DeclareUnicodeCharacter{0398}{\ensuremath{\mit\Theta}}
+  \DeclareUnicodeCharacter{0399}{{\it I}}
+  \DeclareUnicodeCharacter{039A}{{\it K}}
+  \DeclareUnicodeCharacter{039B}{\ensuremath{\mit\Lambda}}
+  \DeclareUnicodeCharacter{039C}{{\it M}}
+  \DeclareUnicodeCharacter{039D}{{\it N}}
+  \DeclareUnicodeCharacter{039E}{\ensuremath{\mit\Xi}}
+  \DeclareUnicodeCharacter{039F}{{\it O}}
+  \DeclareUnicodeCharacter{03A0}{\ensuremath{\mit\Pi}}
+  \DeclareUnicodeCharacter{03A1}{{\it P}}
+  %\DeclareUnicodeCharacter{03A2}{} % none - corresponds to final sigma
+  \DeclareUnicodeCharacter{03A3}{\ensuremath{\mit\Sigma}}
+  \DeclareUnicodeCharacter{03A4}{{\it T}}
+  \DeclareUnicodeCharacter{03A5}{\ensuremath{\mit\Upsilon}}
+  \DeclareUnicodeCharacter{03A6}{\ensuremath{\mit\Phi}}
+  \DeclareUnicodeCharacter{03A7}{{\it X}}
+  \DeclareUnicodeCharacter{03A8}{\ensuremath{\mit\Psi}}
+  \DeclareUnicodeCharacter{03A9}{\ensuremath{\mit\Omega}}
+
+  % Vowels with accents
+  \DeclareUnicodeCharacter{0390}{\ensuremath{\ddot{\acute\iota}}}
+  \DeclareUnicodeCharacter{03AC}{\ensuremath{\acute\alpha}}
+  \DeclareUnicodeCharacter{03AD}{\ensuremath{\acute\epsilon}}
+  \DeclareUnicodeCharacter{03AE}{\ensuremath{\acute\eta}}
+  \DeclareUnicodeCharacter{03AF}{\ensuremath{\acute\iota}}
+  \DeclareUnicodeCharacter{03B0}{\ensuremath{\acute{\ddot\upsilon}}}
+
+  % Standalone accent
+  \DeclareUnicodeCharacter{0384}{\ensuremath{\acute{\ }}}
+
+  % Greek letters lower case
+  \DeclareUnicodeCharacter{03B1}{\ensuremath\alpha}
+  \DeclareUnicodeCharacter{03B2}{\ensuremath\beta}
+  \DeclareUnicodeCharacter{03B3}{\ensuremath\gamma}
+  \DeclareUnicodeCharacter{03B4}{\ensuremath\delta}
+  \DeclareUnicodeCharacter{03B5}{\ensuremath\epsilon}
+  \DeclareUnicodeCharacter{03B6}{\ensuremath\zeta}
+  \DeclareUnicodeCharacter{03B7}{\ensuremath\eta}
+  \DeclareUnicodeCharacter{03B8}{\ensuremath\theta}
+  \DeclareUnicodeCharacter{03B9}{\ensuremath\iota}
+  \DeclareUnicodeCharacter{03BA}{\ensuremath\kappa}
+  \DeclareUnicodeCharacter{03BB}{\ensuremath\lambda}
+  \DeclareUnicodeCharacter{03BC}{\ensuremath\mu}
+  \DeclareUnicodeCharacter{03BD}{\ensuremath\nu}
+  \DeclareUnicodeCharacter{03BE}{\ensuremath\xi}
+  \DeclareUnicodeCharacter{03BF}{{\it o}} % omicron
+  \DeclareUnicodeCharacter{03C0}{\ensuremath\pi}
+  \DeclareUnicodeCharacter{03C1}{\ensuremath\rho}
+  \DeclareUnicodeCharacter{03C2}{\ensuremath\varsigma}
+  \DeclareUnicodeCharacter{03C3}{\ensuremath\sigma}
+  \DeclareUnicodeCharacter{03C4}{\ensuremath\tau}
+  \DeclareUnicodeCharacter{03C5}{\ensuremath\upsilon}
+  \DeclareUnicodeCharacter{03C6}{\ensuremath\phi}
+  \DeclareUnicodeCharacter{03C7}{\ensuremath\chi}
+  \DeclareUnicodeCharacter{03C8}{\ensuremath\psi}
+  \DeclareUnicodeCharacter{03C9}{\ensuremath\omega}
+
+  % More Greek vowels with accents
+  \DeclareUnicodeCharacter{03CA}{\ensuremath{\ddot\iota}}
+  \DeclareUnicodeCharacter{03CB}{\ensuremath{\ddot\upsilon}}
+  \DeclareUnicodeCharacter{03CC}{\ensuremath{\acute o}}
+  \DeclareUnicodeCharacter{03CD}{\ensuremath{\acute\upsilon}}
+  \DeclareUnicodeCharacter{03CE}{\ensuremath{\acute\omega}}
+
+  % Variant Greek letters
+  \DeclareUnicodeCharacter{03D1}{\ensuremath\vartheta}
+  \DeclareUnicodeCharacter{03D6}{\ensuremath\varpi}
+  \DeclareUnicodeCharacter{03F1}{\ensuremath\varrho}
+
+  \DeclareUnicodeCharacter{1E02}{\dotaccent{B}}
+  \DeclareUnicodeCharacter{1E03}{\dotaccent{b}}
+  \DeclareUnicodeCharacter{1E04}{\udotaccent{B}}
+  \DeclareUnicodeCharacter{1E05}{\udotaccent{b}}
+  \DeclareUnicodeCharacter{1E06}{\ubaraccent{B}}
+  \DeclareUnicodeCharacter{1E07}{\ubaraccent{b}}
+  \DeclareUnicodeCharacter{1E0A}{\dotaccent{D}}
+  \DeclareUnicodeCharacter{1E0B}{\dotaccent{d}}
+  \DeclareUnicodeCharacter{1E0C}{\udotaccent{D}}
+  \DeclareUnicodeCharacter{1E0D}{\udotaccent{d}}
+  \DeclareUnicodeCharacter{1E0E}{\ubaraccent{D}}
+  \DeclareUnicodeCharacter{1E0F}{\ubaraccent{d}}
+
+  \DeclareUnicodeCharacter{1E1E}{\dotaccent{F}}
+  \DeclareUnicodeCharacter{1E1F}{\dotaccent{f}}
+
+  \DeclareUnicodeCharacter{1E20}{\=G}
+  \DeclareUnicodeCharacter{1E21}{\=g}
+  \DeclareUnicodeCharacter{1E22}{\dotaccent{H}}
+  \DeclareUnicodeCharacter{1E23}{\dotaccent{h}}
+  \DeclareUnicodeCharacter{1E24}{\udotaccent{H}}
+  \DeclareUnicodeCharacter{1E25}{\udotaccent{h}}
+  \DeclareUnicodeCharacter{1E26}{\"H}
+  \DeclareUnicodeCharacter{1E27}{\"h}
+
+  \DeclareUnicodeCharacter{1E30}{\'K}
+  \DeclareUnicodeCharacter{1E31}{\'k}
+  \DeclareUnicodeCharacter{1E32}{\udotaccent{K}}
+  \DeclareUnicodeCharacter{1E33}{\udotaccent{k}}
+  \DeclareUnicodeCharacter{1E34}{\ubaraccent{K}}
+  \DeclareUnicodeCharacter{1E35}{\ubaraccent{k}}
+  \DeclareUnicodeCharacter{1E36}{\udotaccent{L}}
+  \DeclareUnicodeCharacter{1E37}{\udotaccent{l}}
+  \DeclareUnicodeCharacter{1E3A}{\ubaraccent{L}}
+  \DeclareUnicodeCharacter{1E3B}{\ubaraccent{l}}
+  \DeclareUnicodeCharacter{1E3E}{\'M}
+  \DeclareUnicodeCharacter{1E3F}{\'m}
+
+  \DeclareUnicodeCharacter{1E40}{\dotaccent{M}}
+  \DeclareUnicodeCharacter{1E41}{\dotaccent{m}}
+  \DeclareUnicodeCharacter{1E42}{\udotaccent{M}}
+  \DeclareUnicodeCharacter{1E43}{\udotaccent{m}}
+  \DeclareUnicodeCharacter{1E44}{\dotaccent{N}}
+  \DeclareUnicodeCharacter{1E45}{\dotaccent{n}}
+  \DeclareUnicodeCharacter{1E46}{\udotaccent{N}}
+  \DeclareUnicodeCharacter{1E47}{\udotaccent{n}}
+  \DeclareUnicodeCharacter{1E48}{\ubaraccent{N}}
+  \DeclareUnicodeCharacter{1E49}{\ubaraccent{n}}
+
+  \DeclareUnicodeCharacter{1E54}{\'P}
+  \DeclareUnicodeCharacter{1E55}{\'p}
+  \DeclareUnicodeCharacter{1E56}{\dotaccent{P}}
+  \DeclareUnicodeCharacter{1E57}{\dotaccent{p}}
+  \DeclareUnicodeCharacter{1E58}{\dotaccent{R}}
+  \DeclareUnicodeCharacter{1E59}{\dotaccent{r}}
+  \DeclareUnicodeCharacter{1E5A}{\udotaccent{R}}
+  \DeclareUnicodeCharacter{1E5B}{\udotaccent{r}}
+  \DeclareUnicodeCharacter{1E5E}{\ubaraccent{R}}
+  \DeclareUnicodeCharacter{1E5F}{\ubaraccent{r}}
+
+  \DeclareUnicodeCharacter{1E60}{\dotaccent{S}}
+  \DeclareUnicodeCharacter{1E61}{\dotaccent{s}}
+  \DeclareUnicodeCharacter{1E62}{\udotaccent{S}}
+  \DeclareUnicodeCharacter{1E63}{\udotaccent{s}}
+  \DeclareUnicodeCharacter{1E6A}{\dotaccent{T}}
+  \DeclareUnicodeCharacter{1E6B}{\dotaccent{t}}
+  \DeclareUnicodeCharacter{1E6C}{\udotaccent{T}}
+  \DeclareUnicodeCharacter{1E6D}{\udotaccent{t}}
+  \DeclareUnicodeCharacter{1E6E}{\ubaraccent{T}}
+  \DeclareUnicodeCharacter{1E6F}{\ubaraccent{t}}
+
+  \DeclareUnicodeCharacter{1E7C}{\~V}
+  \DeclareUnicodeCharacter{1E7D}{\~v}
+  \DeclareUnicodeCharacter{1E7E}{\udotaccent{V}}
+  \DeclareUnicodeCharacter{1E7F}{\udotaccent{v}}
+
+  \DeclareUnicodeCharacter{1E80}{\`W}
+  \DeclareUnicodeCharacter{1E81}{\`w}
+  \DeclareUnicodeCharacter{1E82}{\'W}
+  \DeclareUnicodeCharacter{1E83}{\'w}
+  \DeclareUnicodeCharacter{1E84}{\"W}
+  \DeclareUnicodeCharacter{1E85}{\"w}
+  \DeclareUnicodeCharacter{1E86}{\dotaccent{W}}
+  \DeclareUnicodeCharacter{1E87}{\dotaccent{w}}
+  \DeclareUnicodeCharacter{1E88}{\udotaccent{W}}
+  \DeclareUnicodeCharacter{1E89}{\udotaccent{w}}
+  \DeclareUnicodeCharacter{1E8A}{\dotaccent{X}}
+  \DeclareUnicodeCharacter{1E8B}{\dotaccent{x}}
+  \DeclareUnicodeCharacter{1E8C}{\"X}
+  \DeclareUnicodeCharacter{1E8D}{\"x}
+  \DeclareUnicodeCharacter{1E8E}{\dotaccent{Y}}
+  \DeclareUnicodeCharacter{1E8F}{\dotaccent{y}}
+
+  \DeclareUnicodeCharacter{1E90}{\^Z}
+  \DeclareUnicodeCharacter{1E91}{\^z}
+  \DeclareUnicodeCharacter{1E92}{\udotaccent{Z}}
+  \DeclareUnicodeCharacter{1E93}{\udotaccent{z}}
+  \DeclareUnicodeCharacter{1E94}{\ubaraccent{Z}}
+  \DeclareUnicodeCharacter{1E95}{\ubaraccent{z}}
+  \DeclareUnicodeCharacter{1E96}{\ubaraccent{h}}
+  \DeclareUnicodeCharacter{1E97}{\"t}
+  \DeclareUnicodeCharacter{1E98}{\ringaccent{w}}
+  \DeclareUnicodeCharacter{1E99}{\ringaccent{y}}
+
+  \DeclareUnicodeCharacter{1EA0}{\udotaccent{A}}
+  \DeclareUnicodeCharacter{1EA1}{\udotaccent{a}}
+
+  \DeclareUnicodeCharacter{1EB8}{\udotaccent{E}}
+  \DeclareUnicodeCharacter{1EB9}{\udotaccent{e}}
+  \DeclareUnicodeCharacter{1EBC}{\~E}
+  \DeclareUnicodeCharacter{1EBD}{\~e}
+
+  \DeclareUnicodeCharacter{1ECA}{\udotaccent{I}}
+  \DeclareUnicodeCharacter{1ECB}{\udotaccent{i}}
+  \DeclareUnicodeCharacter{1ECC}{\udotaccent{O}}
+  \DeclareUnicodeCharacter{1ECD}{\udotaccent{o}}
+
+  \DeclareUnicodeCharacter{1EE4}{\udotaccent{U}}
+  \DeclareUnicodeCharacter{1EE5}{\udotaccent{u}}
+
+  \DeclareUnicodeCharacter{1EF2}{\`Y}
+  \DeclareUnicodeCharacter{1EF3}{\`y}
+  \DeclareUnicodeCharacter{1EF4}{\udotaccent{Y}}
+
+  \DeclareUnicodeCharacter{1EF8}{\~Y}
+  \DeclareUnicodeCharacter{1EF9}{\~y}
+
+  % Punctuation
+  \DeclareUnicodeCharacter{2013}{--}
+  \DeclareUnicodeCharacter{2014}{---}
+  \DeclareUnicodeCharacter{2018}{\quoteleft}
+  \DeclareUnicodeCharacter{2019}{\quoteright}
+  \DeclareUnicodeCharacter{201A}{\quotesinglbase}
+  \DeclareUnicodeCharacter{201C}{\quotedblleft}
+  \DeclareUnicodeCharacter{201D}{\quotedblright}
+  \DeclareUnicodeCharacter{201E}{\quotedblbase}
+  \DeclareUnicodeCharacter{2020}{\ensuremath\dagger}
+  \DeclareUnicodeCharacter{2021}{\ensuremath\ddagger}
+  \DeclareUnicodeCharacter{2022}{\bullet}
+  \DeclareUnicodeCharacter{202F}{\thinspace}
+  \DeclareUnicodeCharacter{2026}{\dots}
+  \DeclareUnicodeCharacter{2039}{\guilsinglleft}
+  \DeclareUnicodeCharacter{203A}{\guilsinglright}
+
+  \DeclareUnicodeCharacter{20AC}{\euro}
+
+  \DeclareUnicodeCharacter{2192}{\expansion}
+  \DeclareUnicodeCharacter{21D2}{\result}
+
+  % Mathematical symbols
+  \DeclareUnicodeCharacter{2200}{\ensuremath\forall}
+  \DeclareUnicodeCharacter{2203}{\ensuremath\exists}
+  \DeclareUnicodeCharacter{2208}{\ensuremath\in}
+  \DeclareUnicodeCharacter{2212}{\minus}
+  \DeclareUnicodeCharacter{2217}{\ast}
+  \DeclareUnicodeCharacter{221E}{\ensuremath\infty}
+  \DeclareUnicodeCharacter{2225}{\ensuremath\parallel}
+  \DeclareUnicodeCharacter{2227}{\ensuremath\wedge}
+  \DeclareUnicodeCharacter{2229}{\ensuremath\cap}
+  \DeclareUnicodeCharacter{2261}{\equiv}
+  \DeclareUnicodeCharacter{2264}{\ensuremath\leq}
+  \DeclareUnicodeCharacter{2265}{\ensuremath\geq}
+  \DeclareUnicodeCharacter{2282}{\ensuremath\subset}
+  \DeclareUnicodeCharacter{2287}{\ensuremath\supseteq}
+
+  \DeclareUnicodeCharacter{2016}{\ensuremath\Vert}
+  \DeclareUnicodeCharacter{2032}{\ensuremath\prime}
+  \DeclareUnicodeCharacter{210F}{\ensuremath\hbar}
+  \DeclareUnicodeCharacter{2111}{\ensuremath\Im}
+  \DeclareUnicodeCharacter{2113}{\ensuremath\ell}
+  \DeclareUnicodeCharacter{2118}{\ensuremath\wp}
+  \DeclareUnicodeCharacter{211C}{\ensuremath\Re}
+  \DeclareUnicodeCharacter{2127}{\ensuremath\mho}
+  \DeclareUnicodeCharacter{2135}{\ensuremath\aleph}
+  \DeclareUnicodeCharacter{2190}{\ensuremath\leftarrow}
+  \DeclareUnicodeCharacter{2191}{\ensuremath\uparrow}
+  \DeclareUnicodeCharacter{2193}{\ensuremath\downarrow}
+  \DeclareUnicodeCharacter{2194}{\ensuremath\leftrightarrow}
+  \DeclareUnicodeCharacter{2195}{\ensuremath\updownarrow}
+  \DeclareUnicodeCharacter{2196}{\ensuremath\nwarrow}
+  \DeclareUnicodeCharacter{2197}{\ensuremath\nearrow}
+  \DeclareUnicodeCharacter{2198}{\ensuremath\searrow}
+  \DeclareUnicodeCharacter{2199}{\ensuremath\swarrow}
+  \DeclareUnicodeCharacter{21A6}{\ensuremath\mapsto}
+  \DeclareUnicodeCharacter{21A9}{\ensuremath\hookleftarrow}
+  \DeclareUnicodeCharacter{21AA}{\ensuremath\hookrightarrow}
+  \DeclareUnicodeCharacter{21BC}{\ensuremath\leftharpoonup}
+  \DeclareUnicodeCharacter{21BD}{\ensuremath\leftharpoondown}
+  \DeclareUnicodeCharacter{21BE}{\ensuremath\upharpoonright}
+  \DeclareUnicodeCharacter{21C0}{\ensuremath\rightharpoonup}
+  \DeclareUnicodeCharacter{21C1}{\ensuremath\rightharpoondown}
+  \DeclareUnicodeCharacter{21CC}{\ensuremath\rightleftharpoons}
+  \DeclareUnicodeCharacter{21D0}{\ensuremath\Leftarrow}
+  \DeclareUnicodeCharacter{21D1}{\ensuremath\Uparrow}
+  \DeclareUnicodeCharacter{21D3}{\ensuremath\Downarrow}
+  \DeclareUnicodeCharacter{21D4}{\ensuremath\Leftrightarrow}
+  \DeclareUnicodeCharacter{21D5}{\ensuremath\Updownarrow}
+  \DeclareUnicodeCharacter{21DD}{\ensuremath\leadsto}
+  \DeclareUnicodeCharacter{2201}{\ensuremath\complement}
+  \DeclareUnicodeCharacter{2202}{\ensuremath\partial}
+  \DeclareUnicodeCharacter{2205}{\ensuremath\emptyset}
+  \DeclareUnicodeCharacter{2207}{\ensuremath\nabla}
+  \DeclareUnicodeCharacter{2209}{\ensuremath\notin}
+  \DeclareUnicodeCharacter{220B}{\ensuremath\owns}
+  \DeclareUnicodeCharacter{220F}{\ensuremath\prod}
+  \DeclareUnicodeCharacter{2210}{\ensuremath\coprod}
+  \DeclareUnicodeCharacter{2211}{\ensuremath\sum}
+  \DeclareUnicodeCharacter{2213}{\ensuremath\mp}
+  \DeclareUnicodeCharacter{2218}{\ensuremath\circ}
+  \DeclareUnicodeCharacter{221A}{\ensuremath\surd}
+  \DeclareUnicodeCharacter{221D}{\ensuremath\propto}
+  \DeclareUnicodeCharacter{2220}{\ensuremath\angle}
+  \DeclareUnicodeCharacter{2223}{\ensuremath\mid}
+  \DeclareUnicodeCharacter{2228}{\ensuremath\vee}
+  \DeclareUnicodeCharacter{222A}{\ensuremath\cup}
+  \DeclareUnicodeCharacter{222B}{\ensuremath\smallint}
+  \DeclareUnicodeCharacter{222E}{\ensuremath\oint}
+  \DeclareUnicodeCharacter{223C}{\ensuremath\sim}
+  \DeclareUnicodeCharacter{2240}{\ensuremath\wr}
+  \DeclareUnicodeCharacter{2243}{\ensuremath\simeq}
+  \DeclareUnicodeCharacter{2245}{\ensuremath\cong}
+  \DeclareUnicodeCharacter{2248}{\ensuremath\approx}
+  \DeclareUnicodeCharacter{224D}{\ensuremath\asymp}
+  \DeclareUnicodeCharacter{2250}{\ensuremath\doteq}
+  \DeclareUnicodeCharacter{2260}{\ensuremath\neq}
+  \DeclareUnicodeCharacter{226A}{\ensuremath\ll}
+  \DeclareUnicodeCharacter{226B}{\ensuremath\gg}
+  \DeclareUnicodeCharacter{227A}{\ensuremath\prec}
+  \DeclareUnicodeCharacter{227B}{\ensuremath\succ}
+  \DeclareUnicodeCharacter{2283}{\ensuremath\supset}
+  \DeclareUnicodeCharacter{2286}{\ensuremath\subseteq}
+  \DeclareUnicodeCharacter{228E}{\ensuremath\uplus}
+  \DeclareUnicodeCharacter{228F}{\ensuremath\sqsubset}
+  \DeclareUnicodeCharacter{2290}{\ensuremath\sqsupset}
+  \DeclareUnicodeCharacter{2291}{\ensuremath\sqsubseteq}
+  \DeclareUnicodeCharacter{2292}{\ensuremath\sqsupseteq}
+  \DeclareUnicodeCharacter{2293}{\ensuremath\sqcap}
+  \DeclareUnicodeCharacter{2294}{\ensuremath\sqcup}
+  \DeclareUnicodeCharacter{2295}{\ensuremath\oplus}
+  \DeclareUnicodeCharacter{2296}{\ensuremath\ominus}
+  \DeclareUnicodeCharacter{2297}{\ensuremath\otimes}
+  \DeclareUnicodeCharacter{2298}{\ensuremath\oslash}
+  \DeclareUnicodeCharacter{2299}{\ensuremath\odot}
+  \DeclareUnicodeCharacter{22A2}{\ensuremath\vdash}
+  \DeclareUnicodeCharacter{22A3}{\ensuremath\dashv}
+  \DeclareUnicodeCharacter{22A4}{\ensuremath\ptextop}
+  \DeclareUnicodeCharacter{22A5}{\ensuremath\bot}
+  \DeclareUnicodeCharacter{22A8}{\ensuremath\models}
+  \DeclareUnicodeCharacter{22B4}{\ensuremath\unlhd}
+  \DeclareUnicodeCharacter{22B5}{\ensuremath\unrhd}
+  \DeclareUnicodeCharacter{22C0}{\ensuremath\bigwedge}
+  \DeclareUnicodeCharacter{22C1}{\ensuremath\bigvee}
+  \DeclareUnicodeCharacter{22C2}{\ensuremath\bigcap}
+  \DeclareUnicodeCharacter{22C3}{\ensuremath\bigcup}
+  \DeclareUnicodeCharacter{22C4}{\ensuremath\diamond}
+  \DeclareUnicodeCharacter{22C5}{\ensuremath\cdot}
+  \DeclareUnicodeCharacter{22C6}{\ensuremath\star}
+  \DeclareUnicodeCharacter{22C8}{\ensuremath\bowtie}
+  \DeclareUnicodeCharacter{2308}{\ensuremath\lceil}
+  \DeclareUnicodeCharacter{2309}{\ensuremath\rceil}
+  \DeclareUnicodeCharacter{230A}{\ensuremath\lfloor}
+  \DeclareUnicodeCharacter{230B}{\ensuremath\rfloor}
+  \DeclareUnicodeCharacter{2322}{\ensuremath\frown}
+  \DeclareUnicodeCharacter{2323}{\ensuremath\smile}
+
+  \DeclareUnicodeCharacter{25A1}{\ensuremath\Box}
+  \DeclareUnicodeCharacter{25B3}{\ensuremath\triangle}
+  \DeclareUnicodeCharacter{25B7}{\ensuremath\triangleright}
+  \DeclareUnicodeCharacter{25BD}{\ensuremath\bigtriangledown}
+  \DeclareUnicodeCharacter{25C1}{\ensuremath\triangleleft}
+  \DeclareUnicodeCharacter{25C7}{\ensuremath\Diamond}
+  \DeclareUnicodeCharacter{2660}{\ensuremath\spadesuit}
+  \DeclareUnicodeCharacter{2661}{\ensuremath\heartsuit}
+  \DeclareUnicodeCharacter{2662}{\ensuremath\diamondsuit}
+  \DeclareUnicodeCharacter{2663}{\ensuremath\clubsuit}
+  \DeclareUnicodeCharacter{266D}{\ensuremath\flat}
+  \DeclareUnicodeCharacter{266E}{\ensuremath\natural}
+  \DeclareUnicodeCharacter{266F}{\ensuremath\sharp}
+  \DeclareUnicodeCharacter{26AA}{\ensuremath\bigcirc}
+  \DeclareUnicodeCharacter{27B9}{\ensuremath\rangle}
+  \DeclareUnicodeCharacter{27C2}{\ensuremath\perp}
+  \DeclareUnicodeCharacter{27E8}{\ensuremath\langle}
+  \DeclareUnicodeCharacter{27F5}{\ensuremath\longleftarrow}
+  \DeclareUnicodeCharacter{27F6}{\ensuremath\longrightarrow}
+  \DeclareUnicodeCharacter{27F7}{\ensuremath\longleftrightarrow}
+  \DeclareUnicodeCharacter{27FC}{\ensuremath\longmapsto}
+  \DeclareUnicodeCharacter{29F5}{\ensuremath\setminus}
+  \DeclareUnicodeCharacter{2A00}{\ensuremath\bigodot}
+  \DeclareUnicodeCharacter{2A01}{\ensuremath\bigoplus}
+  \DeclareUnicodeCharacter{2A02}{\ensuremath\bigotimes}
+  \DeclareUnicodeCharacter{2A04}{\ensuremath\biguplus}
+  \DeclareUnicodeCharacter{2A06}{\ensuremath\bigsqcup}
+  \DeclareUnicodeCharacter{2A1D}{\ensuremath\Join}
+  \DeclareUnicodeCharacter{2A3F}{\ensuremath\amalg}
+  \DeclareUnicodeCharacter{2AAF}{\ensuremath\preceq}
+  \DeclareUnicodeCharacter{2AB0}{\ensuremath\succeq}
+
+  \global\mathchardef\checkmark="1370 % actually the square root sign
+  \DeclareUnicodeCharacter{2713}{\ensuremath\checkmark}
+}% end of \utfeightchardefs
+
+% US-ASCII character definitions.
+\def\asciichardefs{% nothing need be done
+   \relax
+}
+
+% Latin1 (ISO-8859-1) character definitions.
+\def\nonasciistringdefs{%
+  \setnonasciicharscatcode\active
+  \def\defstringchar##1{\def##1{\string##1}}%
+  %
+  \defstringchar^^80\defstringchar^^81\defstringchar^^82\defstringchar^^83%
+  \defstringchar^^84\defstringchar^^85\defstringchar^^86\defstringchar^^87%
+  \defstringchar^^88\defstringchar^^89\defstringchar^^8a\defstringchar^^8b%
+  \defstringchar^^8c\defstringchar^^8d\defstringchar^^8e\defstringchar^^8f%
+  %
+  \defstringchar^^90\defstringchar^^91\defstringchar^^92\defstringchar^^93%
+  \defstringchar^^94\defstringchar^^95\defstringchar^^96\defstringchar^^97%
+  \defstringchar^^98\defstringchar^^99\defstringchar^^9a\defstringchar^^9b%
+  \defstringchar^^9c\defstringchar^^9d\defstringchar^^9e\defstringchar^^9f%
+  %
+  \defstringchar^^a0\defstringchar^^a1\defstringchar^^a2\defstringchar^^a3%
+  \defstringchar^^a4\defstringchar^^a5\defstringchar^^a6\defstringchar^^a7%
+  \defstringchar^^a8\defstringchar^^a9\defstringchar^^aa\defstringchar^^ab%
+  \defstringchar^^ac\defstringchar^^ad\defstringchar^^ae\defstringchar^^af%
+  %
+  \defstringchar^^b0\defstringchar^^b1\defstringchar^^b2\defstringchar^^b3%
+  \defstringchar^^b4\defstringchar^^b5\defstringchar^^b6\defstringchar^^b7%
+  \defstringchar^^b8\defstringchar^^b9\defstringchar^^ba\defstringchar^^bb%
+  \defstringchar^^bc\defstringchar^^bd\defstringchar^^be\defstringchar^^bf%
+  %
+  \defstringchar^^c0\defstringchar^^c1\defstringchar^^c2\defstringchar^^c3%
+  \defstringchar^^c4\defstringchar^^c5\defstringchar^^c6\defstringchar^^c7%
+  \defstringchar^^c8\defstringchar^^c9\defstringchar^^ca\defstringchar^^cb%
+  \defstringchar^^cc\defstringchar^^cd\defstringchar^^ce\defstringchar^^cf%
+  %
+  \defstringchar^^d0\defstringchar^^d1\defstringchar^^d2\defstringchar^^d3%
+  \defstringchar^^d4\defstringchar^^d5\defstringchar^^d6\defstringchar^^d7%
+  \defstringchar^^d8\defstringchar^^d9\defstringchar^^da\defstringchar^^db%
+  \defstringchar^^dc\defstringchar^^dd\defstringchar^^de\defstringchar^^df%
+  %
+  \defstringchar^^e0\defstringchar^^e1\defstringchar^^e2\defstringchar^^e3%
+  \defstringchar^^e4\defstringchar^^e5\defstringchar^^e6\defstringchar^^e7%
+  \defstringchar^^e8\defstringchar^^e9\defstringchar^^ea\defstringchar^^eb%
+  \defstringchar^^ec\defstringchar^^ed\defstringchar^^ee\defstringchar^^ef%
+  %
+  \defstringchar^^f0\defstringchar^^f1\defstringchar^^f2\defstringchar^^f3%
+  \defstringchar^^f4\defstringchar^^f5\defstringchar^^f6\defstringchar^^f7%
+  \defstringchar^^f8\defstringchar^^f9\defstringchar^^fa\defstringchar^^fb%
+  \defstringchar^^fc\defstringchar^^fd\defstringchar^^fe\defstringchar^^ff%
+}
+
+
+% define all the unicode characters we know about, for the sake of @U.
+\utfeightchardefs
+
+
+% Make non-ASCII characters printable again for compatibility with
+% existing Texinfo documents that may use them, even without declaring a
+% document encoding.
+%
+\setnonasciicharscatcode \other
+
+
+\message{formatting,}
+
+\newdimen\defaultparindent \defaultparindent = 15pt
+
+\chapheadingskip = 15pt plus 4pt minus 2pt
+\secheadingskip = 12pt plus 3pt minus 2pt
+\subsecheadingskip = 9pt plus 2pt minus 2pt
+
+% Prevent underfull vbox error messages.
+\vbadness = 10000
+
+% Don't be very finicky about underfull hboxes, either.
+\hbadness = 6666
+
+% Following George Bush, get rid of widows and orphans.
+\widowpenalty=10000
+\clubpenalty=10000
+
+% Use TeX 3.0's \emergencystretch to help line breaking, but if we're
+% using an old version of TeX, don't do anything.  We want the amount of
+% stretch added to depend on the line length, hence the dependence on
+% \hsize.  We call this whenever the paper size is set.
+%
+\def\setemergencystretch{%
+  \ifx\emergencystretch\thisisundefined
+    % Allow us to assign to \emergencystretch anyway.
+    \def\emergencystretch{\dimen0}%
+  \else
+    \emergencystretch = .15\hsize
+  \fi
+}
+
+% Parameters in order: 1) textheight; 2) textwidth;
+% 3) voffset; 4) hoffset; 5) binding offset; 6) topskip;
+% 7) physical page height; 8) physical page width.
+%
+% We also call \setleading{\textleading}, so the caller should define
+% \textleading.  The caller should also set \parskip.
+%
+\def\internalpagesizes#1#2#3#4#5#6#7#8{%
+  \voffset = #3\relax
+  \topskip = #6\relax
+  \splittopskip = \topskip
+  %
+  \vsize = #1\relax
+  \advance\vsize by \topskip
+  \outervsize = \vsize
+  \advance\outervsize by 2\topandbottommargin
+  \pageheight = \vsize
+  %
+  \hsize = #2\relax
+  \outerhsize = \hsize
+  \advance\outerhsize by 0.5in
+  \pagewidth = \hsize
+  %
+  \normaloffset = #4\relax
+  \bindingoffset = #5\relax
+  %
+  \ifpdf
+    \pdfpageheight #7\relax
+    \pdfpagewidth #8\relax
+    % if we don't reset these, they will remain at "1 true in" of
+    % whatever layout pdftex was dumped with.
+    \pdfhorigin = 1 true in
+    \pdfvorigin = 1 true in
+  \fi
+  %
+  \setleading{\textleading}
+  %
+  \parindent = \defaultparindent
+  \setemergencystretch
+}
+
+% @letterpaper (the default).
+\def\letterpaper{{\globaldefs = 1
+  \parskip = 3pt plus 2pt minus 1pt
+  \textleading = 13.2pt
+  %
+  % If page is nothing but text, make it come out even.
+  \internalpagesizes{607.2pt}{6in}% that's 46 lines
+                    {\voffset}{.25in}%
+                    {\bindingoffset}{36pt}%
+                    {11in}{8.5in}%
+}}
+
+% Use @smallbook to reset parameters for 7x9.25 trim size.
+\def\smallbook{{\globaldefs = 1
+  \parskip = 2pt plus 1pt
+  \textleading = 12pt
+  %
+  \internalpagesizes{7.5in}{5in}%
+                    {-.2in}{0in}%
+                    {\bindingoffset}{16pt}%
+                    {9.25in}{7in}%
+  %
+  \lispnarrowing = 0.3in
+  \tolerance = 700
+  \hfuzz = 1pt
+  \contentsrightmargin = 0pt
+  \defbodyindent = .5cm
+}}
+
+% Use @smallerbook to reset parameters for 6x9 trim size.
+% (Just testing, parameters still in flux.)
+\def\smallerbook{{\globaldefs = 1
+  \parskip = 1.5pt plus 1pt
+  \textleading = 12pt
+  %
+  \internalpagesizes{7.4in}{4.8in}%
+                    {-.2in}{-.4in}%
+                    {0pt}{14pt}%
+                    {9in}{6in}%
+  %
+  \lispnarrowing = 0.25in
+  \tolerance = 700
+  \hfuzz = 1pt
+  \contentsrightmargin = 0pt
+  \defbodyindent = .4cm
+}}
+
+% Use @afourpaper to print on European A4 paper.
+\def\afourpaper{{\globaldefs = 1
+  \parskip = 3pt plus 2pt minus 1pt
+  \textleading = 13.2pt
+  %
+  % Double-side printing via postscript on Laserjet 4050
+  % prints double-sided nicely when \bindingoffset=10mm and \hoffset=-6mm.
+  % To change the settings for a different printer or situation, adjust
+  % \normaloffset until the front-side and back-side texts align.  Then
+  % do the same for \bindingoffset.  You can set these for testing in
+  % your texinfo source file like this:
+  % @tex
+  % \global\normaloffset = -6mm
+  % \global\bindingoffset = 10mm
+  % @end tex
+  \internalpagesizes{673.2pt}{160mm}% that's 51 lines
+                    {\voffset}{\hoffset}%
+                    {\bindingoffset}{44pt}%
+                    {297mm}{210mm}%
+  %
+  \tolerance = 700
+  \hfuzz = 1pt
+  \contentsrightmargin = 0pt
+  \defbodyindent = 5mm
+}}
+
+% Use @afivepaper to print on European A5 paper.
+% From romildo@urano.iceb.ufop.br, 2 July 2000.
+% He also recommends making @example and @lisp be small.
+\def\afivepaper{{\globaldefs = 1
+  \parskip = 2pt plus 1pt minus 0.1pt
+  \textleading = 12.5pt
+  %
+  \internalpagesizes{160mm}{120mm}%
+                    {\voffset}{\hoffset}%
+                    {\bindingoffset}{8pt}%
+                    {210mm}{148mm}%
+  %
+  \lispnarrowing = 0.2in
+  \tolerance = 800
+  \hfuzz = 1.2pt
+  \contentsrightmargin = 0pt
+  \defbodyindent = 2mm
+  \tableindent = 12mm
+}}
+
+% A specific text layout, 24x15cm overall, intended for A4 paper.
+\def\afourlatex{{\globaldefs = 1
+  \afourpaper
+  \internalpagesizes{237mm}{150mm}%
+                    {\voffset}{4.6mm}%
+                    {\bindingoffset}{7mm}%
+                    {297mm}{210mm}%
+  %
+  % Must explicitly reset to 0 because we call \afourpaper.
+  \globaldefs = 0
+}}
+
+% Use @afourwide to print on A4 paper in landscape format.
+\def\afourwide{{\globaldefs = 1
+  \afourpaper
+  \internalpagesizes{241mm}{165mm}%
+                    {\voffset}{-2.95mm}%
+                    {\bindingoffset}{7mm}%
+                    {297mm}{210mm}%
+  \globaldefs = 0
+}}
+
+% @pagesizes TEXTHEIGHT[,TEXTWIDTH]
+% Perhaps we should allow setting the margins, \topskip, \parskip,
+% and/or leading, also. Or perhaps we should compute them somehow.
+%
+\parseargdef\pagesizes{\pagesizesyyy #1,,\finish}
+\def\pagesizesyyy#1,#2,#3\finish{{%
+  \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi
+  \globaldefs = 1
+  %
+  \parskip = 3pt plus 2pt minus 1pt
+  \setleading{\textleading}%
+  %
+  \dimen0 = #1\relax
+  \advance\dimen0 by \voffset
+  %
+  \dimen2 = \hsize
+  \advance\dimen2 by \normaloffset
+  %
+  \internalpagesizes{#1}{\hsize}%
+                    {\voffset}{\normaloffset}%
+                    {\bindingoffset}{44pt}%
+                    {\dimen0}{\dimen2}%
+}}
+
+% Set default to letter.
+%
+\letterpaper
+
+
+\message{and turning on texinfo input format.}
+
+\def^^L{\par} % remove \outer, so ^L can appear in an @comment
+
+% DEL is a comment character, in case @c does not suffice.
+\catcode`\^^? = 14
+
+% Define macros to output various characters with catcode for normal text.
+\catcode`\"=\other \def\normaldoublequote{"}
+\catcode`\$=\other \def\normaldollar{$}%$ font-lock fix
+\catcode`\+=\other \def\normalplus{+}
+\catcode`\<=\other \def\normalless{<}
+\catcode`\>=\other \def\normalgreater{>}
+\catcode`\^=\other \def\normalcaret{^}
+\catcode`\_=\other \def\normalunderscore{_}
+\catcode`\|=\other \def\normalverticalbar{|}
+\catcode`\~=\other \def\normaltilde{~}
+
+% This macro is used to make a character print one way in \tt
+% (where it can probably be output as-is), and another way in other fonts,
+% where something hairier probably needs to be done.
+%
+% #1 is what to print if we are indeed using \tt; #2 is what to print
+% otherwise.  Since all the Computer Modern typewriter fonts have zero
+% interword stretch (and shrink), and it is reasonable to expect all
+% typewriter fonts to have this, we can check that font parameter.
+%
+\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi}
+
+% Same as above, but check for italic font.  Actually this also catches
+% non-italic slanted fonts since it is impossible to distinguish them from
+% italic fonts.  But since this is only used by $ and it uses \sl anyway
+% this is not a problem.
+\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi}
+
+% Turn off all special characters except @
+% (and those which the user can use as if they were ordinary).
+% Most of these we simply print from the \tt font, but for some, we can
+% use math or other variants that look better in normal text.
+
+\catcode`\"=\active
+\def\activedoublequote{{\tt\char34}}
+\let"=\activedoublequote
+\catcode`\~=\active \def\activetilde{{\tt\char126}} \let~ = \activetilde
+\chardef\hatchar=`\^
+\catcode`\^=\active \def\activehat{{\tt \hatchar}} \let^ = \activehat
+
+\catcode`\_=\active
+\def_{\ifusingtt\normalunderscore\_}
+\let\realunder=_
+% Subroutine for the previous macro.
+\def\_{\leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em }
+
+\catcode`\|=\active
+\def|{{\tt\char124}}
+
+\chardef \less=`\<
+\catcode`\<=\active \def\activeless{{\tt \less}}\let< = \activeless
+\chardef \gtr=`\>
+\catcode`\>=\active \def\activegtr{{\tt \gtr}}\let> = \activegtr
+\catcode`\+=\active \def+{{\tt \char 43}}
+\catcode`\$=\active \def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix
+\catcode`\-=\active \let-=\normaldash
+
+
+% used for headline/footline in the output routine, in case the page
+% breaks in the middle of an @tex block.
+\def\texinfochars{%
+  \let< = \activeless
+  \let> = \activegtr
+  \let~ = \activetilde 
+  \let^ = \activehat
+  \markupsetuplqdefault \markupsetuprqdefault 
+  \let\b = \strong
+  \let\i = \smartitalic
+  % in principle, all other definitions in \tex have to be undone too.
+}
+
+% Used sometimes to turn off (effectively) the active characters even after
+% parsing them.
+\def\turnoffactive{%
+  \normalturnoffactive
+  \otherbackslash
+}
+
+\catcode`\@=0
+
+% \backslashcurfont outputs one backslash character in current font,
+% as in \char`\\.
+\global\chardef\backslashcurfont=`\\
+\global\let\rawbackslashxx=\backslashcurfont  % let existing .??s files work
+
+% \realbackslash is an actual character `\' with catcode other, and
+% \doublebackslash is two of them (for the pdf outlines).
+{\catcode`\\=\other @gdef@realbackslash{\} @gdef@doublebackslash{\\}}
+
+% In Texinfo, backslash is an active character; it prints the backslash
+% in fixed width font.
+\catcode`\\=\active  % @ for escape char from now on.
+
+% Print a typewriter backslash.  For math mode, we can't simply use
+% \backslashcurfont: the story here is that in math mode, the \char
+% of \backslashcurfont ends up printing the roman \ from the math symbol
+% font (because \char in math mode uses the \mathcode, and plain.tex
+% sets \mathcode`\\="026E).  Hence we use an explicit \mathchar,
+% which is the decimal equivalent of "715c (class 7, e.g., use \fam;
+% ignored family value; char position "5C).  We can't use " for the
+% usual hex value because it has already been made active.
+
+@def@ttbackslash{{@tt @ifmmode @mathchar29020 @else @backslashcurfont @fi}}
+@let@backslashchar = @ttbackslash % @backslashchar{} is for user documents.
+
+% \rawbackslash defines an active \ to do \backslashcurfont.
+% \otherbackslash defines an active \ to be a literal `\' character with
+% catcode other.  We switch back and forth between these.
+@gdef@rawbackslash{@let\=@backslashcurfont}
+@gdef@otherbackslash{@let\=@realbackslash}
+
+% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
+% the literal character `\'.
+%
+{@catcode`- = @active
+ @gdef@normalturnoffactive{%
+   @nonasciistringdefs
+   @let-=@normaldash
+   @let"=@normaldoublequote
+   @let$=@normaldollar %$ font-lock fix
+   @let+=@normalplus
+   @let<=@normalless
+   @let>=@normalgreater
+   @let^=@normalcaret
+   @let_=@normalunderscore
+   @let|=@normalverticalbar
+   @let~=@normaltilde
+   @let\=@ttbackslash
+   @markupsetuplqdefault
+   @markupsetuprqdefault
+   @unsepspaces
+ }
+}
+
+% If a .fmt file is being used, characters that might appear in a file
+% name cannot be active until we have parsed the command line.
+% So turn them off again, and have @fixbackslash turn them back on.
+@catcode`+=@other @catcode`@_=@other
+
+% \enablebackslashhack - allow file to begin `\input texinfo'
+%
+% If a .fmt file is being used, we don't want the `\input texinfo' to show up.
+% That is what \eatinput is for; after that, the `\' should revert to printing
+% a backslash.
+% If the file did not have a `\input texinfo', then it is turned off after
+% the first line; otherwise the first `\' in the file would cause an error.
+% This is used on the very last line of this file, texinfo.tex.
+% We also use @c to call @fixbackslash, in case ends of lines are hidden.
+{
+@catcode`@^=7
+@catcode`@^^M=13@gdef@enablebackslashhack{%
+  @global@let\ = @eatinput%
+  @catcode`@^^M=13%
+  @def@c{@fixbackslash@c}%
+  @def ^^M{@let^^M@secondlinenl}%
+  @gdef @secondlinenl{@let^^M@thirdlinenl}%
+  @gdef @thirdlinenl{@fixbackslash}%
+}}
+
+{@catcode`@^=7 @catcode`@^^M=13%
+@gdef@eatinput input texinfo#1^^M{@fixbackslash}}
+
+@gdef@fixbackslash{%
+  @ifx\@eatinput @let\ = @ttbackslash @fi
+  @catcode13=5 % regular end of line
+  @let@c=@texinfoc
+  % Also turn back on active characters that might appear in the input
+  % file name, in case not using a pre-dumped format.
+  @catcode`+=@active
+  @catcode`@_=@active
+  %
+  % If texinfo.cnf is present on the system, read it.
+  % Useful for site-wide @afourpaper, etc.  This macro, @fixbackslash, gets
+  % called at the beginning of every Texinfo file.  Not opening texinfo.cnf
+  % directly in this file, texinfo.tex, makes it possible to make a format
+  % file for Texinfo.
+  %
+  @openin 1 texinfo.cnf
+  @ifeof 1 @else @input texinfo.cnf @fi
+  @closein 1
+}
+
+
+% Say @foo, not \foo, in error messages.
+@escapechar = `@@
+
+% These (along with & and #) are made active for url-breaking, so need
+% active definitions as the normal characters.
+@def@normaldot{.}
+@def@normalquest{?}
+@def@normalslash{/}
+
+% These look ok in all fonts, so just make them not special.
+% @hashchar{} gets its own user-level command, because of #line.
+@catcode`@& = @other @def@normalamp{&}
+@catcode`@# = @other @def@normalhash{#}
+@catcode`@% = @other @def@normalpercent{%}
+
+@let @hashchar = @normalhash
+
+@c Finally, make ` and ' active, so that txicodequoteundirected and
+@c txicodequotebacktick work right in, e.g., @w{@code{`foo'}}.  If we
+@c don't make ` and ' active, @code will not get them as active chars.
+@c Do this last of all since we use ` in the previous @catcode assignments.
+@catcode`@'=@active
+@catcode`@`=@active
+@markupsetuplqdefault
+@markupsetuprqdefault
+
+@c Local variables:
+@c eval: (add-hook 'write-file-hooks 'time-stamp)
+@c page-delimiter: "^\\\\message\\|emacs-page"
+@c time-stamp-start: "def\\\\texinfoversion{"
+@c time-stamp-format: "%:y-%02m-%02d.%02H"
+@c time-stamp-end: "}"
+@c End:
+
+@c vim:sw=2:
+
+@ignore
+   arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115
+@end ignore
+@enablebackslashhack
diff --git a/doc/version.texi b/doc/version.texi
new file mode 100644
index 0000000..561a6d0
--- /dev/null
+++ b/doc/version.texi
@@ -0,0 +1,11 @@
+@ignore
+Copyright (C) 1988-2020 Free Software Foundation, Inc.
+@end ignore
+
+@set LASTCHANGE Thu Oct 29 16:18:54 EDT 2020
+
+@set EDITION 5.1
+@set VERSION 5.1
+
+@set UPDATED 29 October 2020
+@set UPDATED-MONTH October 2020
diff --git a/error.c b/error.c
new file mode 100644
index 0000000..7df4b14
--- /dev/null
+++ b/error.c
@@ -0,0 +1,511 @@
+/* error.c -- Functions for handling errors. */
+
+/* Copyright (C) 1993-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include "bashtypes.h"
+#include <fcntl.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#if defined (PREFER_STDARG)
+#  include <stdarg.h>
+#else
+#  include <varargs.h>
+#endif
+
+#include <stdio.h>
+
+#include <errno.h>
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+#include "bashansi.h"
+#include "bashintl.h"
+
+#include "shell.h"
+#include "execute_cmd.h"
+#include "flags.h"
+#include "input.h"
+
+#if defined (HISTORY)
+#  include "bashhist.h"
+#endif
+
+extern int executing_line_number PARAMS((void));
+
+#if defined (JOB_CONTROL)
+extern pid_t shell_pgrp;
+extern int give_terminal_to PARAMS((pid_t, int));
+#endif /* JOB_CONTROL */
+
+#if defined (ARRAY_VARS)
+extern const char * const bash_badsub_errmsg;
+#endif
+
+static void error_prolog PARAMS((int));
+
+/* The current maintainer of the shell.  You change this in the
+   Makefile. */
+#if !defined (MAINTAINER)
+#define MAINTAINER "bash-maintainers@gnu.org"
+#endif
+
+const char * const the_current_maintainer = MAINTAINER;
+
+int gnu_error_format = 0;
+
+static void
+error_prolog (print_lineno)
+     int print_lineno;
+{
+  char *ename;
+  int line;
+
+  ename = get_name_for_error ();
+  line = (print_lineno && interactive_shell == 0) ? executing_line_number () : -1;
+
+  if (line > 0)
+    fprintf (stderr, "%s:%s%d: ", ename, gnu_error_format ? "" : _(" line "), line);
+  else
+    fprintf (stderr, "%s: ", ename);
+}
+
+/* Return the name of the shell or the shell script for error reporting. */
+char *
+get_name_for_error ()
+{
+  char *name;
+#if defined (ARRAY_VARS)
+  SHELL_VAR *bash_source_v;
+  ARRAY *bash_source_a;
+#endif
+
+  name = (char *)NULL;
+  if (interactive_shell == 0)
+    {
+#if defined (ARRAY_VARS)
+      bash_source_v = find_variable ("BASH_SOURCE");
+      if (bash_source_v && array_p (bash_source_v) &&
+	  (bash_source_a = array_cell (bash_source_v)))
+	name = array_reference (bash_source_a, 0);
+      if (name == 0 || *name == '\0')	/* XXX - was just name == 0 */
+#endif
+	name = dollar_vars[0];
+    }
+  if (name == 0 && shell_name && *shell_name)
+    name = base_pathname (shell_name);
+  if (name == 0)
+#if defined (PROGRAM)
+    name = PROGRAM;
+#else
+    name = "bash";
+#endif
+
+  return (name);
+}
+
+/* Report an error having to do with FILENAME.  This does not use
+   sys_error so the filename is not interpreted as a printf-style
+   format string. */
+void
+file_error (filename)
+     const char *filename;
+{
+  report_error ("%s: %s", filename, strerror (errno));
+}
+
+void
+#if defined (PREFER_STDARG)
+programming_error (const char *format, ...)
+#else
+programming_error (format, va_alist)
+     const char *format;
+     va_dcl
+#endif
+{
+  va_list args;
+  char *h;
+
+#if defined (JOB_CONTROL)
+  give_terminal_to (shell_pgrp, 0);
+#endif /* JOB_CONTROL */
+
+  SH_VA_START (args, format);
+
+  vfprintf (stderr, format, args);
+  fprintf (stderr, "\n");
+  va_end (args);
+
+#if defined (HISTORY)
+  if (remember_on_history)
+    {
+      h = last_history_line ();
+      fprintf (stderr, _("last command: %s\n"), h ? h : "(null)");
+    }
+#endif
+
+#if 0
+  fprintf (stderr, "Report this to %s\n", the_current_maintainer);
+#endif
+
+  fprintf (stderr, _("Aborting..."));
+  fflush (stderr);
+
+  abort ();
+}
+
+/* Print an error message and, if `set -e' has been executed, exit the
+   shell.  Used in this file by file_error and programming_error.  Used
+   outside this file mostly to report substitution and expansion errors,
+   and for bad invocation options. */
+void
+#if defined (PREFER_STDARG)
+report_error (const char *format, ...)
+#else
+report_error (format, va_alist)
+     const char *format;
+     va_dcl
+#endif
+{
+  va_list args;
+
+  error_prolog (1);
+
+  SH_VA_START (args, format);
+
+  vfprintf (stderr, format, args);
+  fprintf (stderr, "\n");
+
+  va_end (args);
+  if (exit_immediately_on_error)
+    {
+      if (last_command_exit_value == 0)
+	last_command_exit_value = EXECUTION_FAILURE;
+      exit_shell (last_command_exit_value);
+    }
+}
+
+void
+#if defined (PREFER_STDARG)
+fatal_error (const char *format, ...)
+#else
+fatal_error (format, va_alist)
+     const char *format;
+     va_dcl
+#endif
+{
+  va_list args;
+
+  error_prolog (0);
+
+  SH_VA_START (args, format);
+
+  vfprintf (stderr, format, args);
+  fprintf (stderr, "\n");
+
+  va_end (args);
+  sh_exit (2);
+}
+
+void
+#if defined (PREFER_STDARG)
+internal_error (const char *format, ...)
+#else
+internal_error (format, va_alist)
+     const char *format;
+     va_dcl
+#endif
+{
+  va_list args;
+
+  error_prolog (1);
+
+  SH_VA_START (args, format);
+
+  vfprintf (stderr, format, args);
+  fprintf (stderr, "\n");
+
+  va_end (args);
+}
+
+void
+#if defined (PREFER_STDARG)
+internal_warning (const char *format, ...)
+#else
+internal_warning (format, va_alist)
+     const char *format;
+     va_dcl
+#endif
+{
+  va_list args;
+
+  error_prolog (1);
+  fprintf (stderr, _("warning: "));
+
+  SH_VA_START (args, format);
+
+  vfprintf (stderr, format, args);
+  fprintf (stderr, "\n");
+
+  va_end (args);
+}
+
+void
+#if defined (PREFER_STDARG)
+internal_inform (const char *format, ...)
+#else
+internal_inform (format, va_alist)
+     const char *format;
+     va_dcl
+#endif
+{
+  va_list args;
+
+  error_prolog (1);
+  /* TRANSLATORS: this is a prefix for informational messages. */
+  fprintf (stderr, _("INFORM: "));
+
+  SH_VA_START (args, format);
+
+  vfprintf (stderr, format, args);
+  fprintf (stderr, "\n");
+
+  va_end (args);
+}
+
+void
+#if defined (PREFER_STDARG)
+sys_error (const char *format, ...)
+#else
+sys_error (format, va_alist)
+     const char *format;
+     va_dcl
+#endif
+{
+  int e;
+  va_list args;
+
+  e = errno;
+  error_prolog (0);
+
+  SH_VA_START (args, format);
+
+  vfprintf (stderr, format, args);
+  fprintf (stderr, ": %s\n", strerror (e));
+
+  va_end (args);
+}
+
+/* An error from the parser takes the general form
+
+	shell_name: input file name: line number: message
+
+   The input file name and line number are omitted if the shell is
+   currently interactive.  If the shell is not currently interactive,
+   the input file name is inserted only if it is different from the
+   shell name. */
+void
+#if defined (PREFER_STDARG)
+parser_error (int lineno, const char *format, ...)
+#else
+parser_error (lineno, format, va_alist)
+     int lineno;
+     const char *format;
+     va_dcl
+#endif
+{
+  va_list args;
+  char *ename, *iname;
+
+  ename = get_name_for_error ();
+  iname = yy_input_name ();
+
+  if (interactive)
+    fprintf (stderr, "%s: ", ename);
+  else if (interactive_shell)
+    fprintf (stderr, "%s: %s:%s%d: ", ename, iname, gnu_error_format ? "" : _(" line "), lineno);
+  else if (STREQ (ename, iname))
+    fprintf (stderr, "%s:%s%d: ", ename, gnu_error_format ? "" : _(" line "), lineno);
+  else
+    fprintf (stderr, "%s: %s:%s%d: ", ename, iname, gnu_error_format ? "" : _(" line "), lineno);
+
+  SH_VA_START (args, format);
+
+  vfprintf (stderr, format, args);
+  fprintf (stderr, "\n");
+
+  va_end (args);
+
+  if (exit_immediately_on_error)
+    exit_shell (last_command_exit_value = 2);
+}
+
+#ifdef DEBUG
+/* This assumes ASCII and is suitable only for debugging */
+char *
+strescape (str)
+     const char *str;
+{
+  char *r, *result;
+  unsigned char *s;
+
+  r = result = (char *)xmalloc (strlen (str) * 2 + 1);
+
+  for (s = (unsigned char *)str; s && *s; s++)
+    {
+      if (*s < ' ')
+	{
+	  *r++ = '^';
+	  *r++ = *s+64;
+	}
+      else if (*s == 127)
+	{
+	  *r++ = '^';
+	  *r++ = '?';
+	}
+     else
+	*r++ = *s;
+    }
+
+  *r = '\0';
+  return result;
+}
+
+void
+#if defined (PREFER_STDARG)
+itrace (const char *format, ...)
+#else
+itrace (format, va_alist)
+     const char *format;
+     va_dcl
+#endif
+{
+  va_list args;
+
+  fprintf(stderr, "TRACE: pid %ld: ", (long)getpid());
+
+  SH_VA_START (args, format);
+
+  vfprintf (stderr, format, args);
+  fprintf (stderr, "\n");
+
+  va_end (args);
+
+  fflush(stderr);
+}
+
+/* A trace function for silent debugging -- doesn't require a control
+   terminal. */
+void
+#if defined (PREFER_STDARG)
+trace (const char *format, ...)
+#else
+trace (format, va_alist)
+     const char *format;
+     va_dcl
+#endif
+{
+  va_list args;
+  static FILE *tracefp = (FILE *)NULL;
+
+  if (tracefp == NULL)
+    tracefp = fopen("/tmp/bash-trace.log", "a+");
+
+  if (tracefp == NULL)
+    tracefp = stderr;
+  else
+    fcntl (fileno (tracefp), F_SETFD, 1);     /* close-on-exec */
+
+  fprintf(tracefp, "TRACE: pid %ld: ", (long)getpid());
+
+  SH_VA_START (args, format);
+
+  vfprintf (tracefp, format, args);
+  fprintf (tracefp, "\n");
+
+  va_end (args);
+
+  fflush(tracefp);
+}
+
+#endif /* DEBUG */
+
+/* **************************************************************** */
+/*								    */
+/*  		    Common error reporting			    */
+/*								    */
+/* **************************************************************** */
+
+
+static const char * const cmd_error_table[] = {
+	N_("unknown command error"),	/* CMDERR_DEFAULT */
+	N_("bad command type"),		/* CMDERR_BADTYPE */
+	N_("bad connector"),		/* CMDERR_BADCONN */
+	N_("bad jump"),			/* CMDERR_BADJUMP */
+	0
+};
+
+void
+command_error (func, code, e, flags)
+     const char *func;
+     int code, e, flags;	/* flags currently unused */
+{
+  if (code > CMDERR_LAST)
+    code = CMDERR_DEFAULT;
+
+  programming_error ("%s: %s: %d", func, _(cmd_error_table[code]), e);
+}
+
+char *
+command_errstr (code)
+     int code;
+{
+  if (code > CMDERR_LAST)
+    code = CMDERR_DEFAULT;
+
+  return (_(cmd_error_table[code]));
+}
+
+#ifdef ARRAY_VARS
+void
+err_badarraysub (s)
+     const char *s;
+{
+  report_error ("%s: %s", s, _(bash_badsub_errmsg));
+}
+#endif
+
+void
+err_unboundvar (s)
+     const char *s;
+{
+  report_error (_("%s: unbound variable"), s);
+}
+
+void
+err_readonly (s)
+     const char *s;
+{
+  report_error (_("%s: readonly variable"), s);
+}
diff --git a/error.h b/error.h
new file mode 100644
index 0000000..3082809
--- /dev/null
+++ b/error.h
@@ -0,0 +1,73 @@
+/* error.h -- External declarations of functions appearing in error.c. */
+
+/* Copyright (C) 1993-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_ERROR_H_)
+#define _ERROR_H_
+
+#include "stdc.h"
+
+/* Get the name of the shell or shell script for an error message. */
+extern char *get_name_for_error PARAMS((void));
+
+/* Report an error having to do with FILENAME. */
+extern void file_error PARAMS((const char *));
+
+/* Report a programmer's error, and abort.  Pass REASON, and ARG1 ... ARG5. */
+extern void programming_error PARAMS((const char *, ...))  __attribute__((__format__ (printf, 1, 2)));
+
+/* General error reporting.  Pass FORMAT and ARG1 ... ARG5. */
+extern void report_error PARAMS((const char *, ...))  __attribute__((__format__ (printf, 1, 2)));
+
+/* Error messages for parts of the parser that don't call report_syntax_error */
+extern void parser_error PARAMS((int, const char *, ...))  __attribute__((__format__ (printf, 2, 3)));
+
+/* Report an unrecoverable error and exit.  Pass FORMAT and ARG1 ... ARG5. */
+extern void fatal_error PARAMS((const char *, ...))  __attribute__((__format__ (printf, 1, 2)));
+
+/* Report a system error, like BSD warn(3). */
+extern void sys_error PARAMS((const char *, ...))  __attribute__((__format__ (printf, 1, 2)));
+
+/* Report an internal error. */
+extern void internal_error PARAMS((const char *, ...))  __attribute__((__format__ (printf, 1, 2)));
+
+/* Report an internal warning. */
+extern void internal_warning PARAMS((const char *, ...))  __attribute__((__format__ (printf, 1, 2)));
+
+/* Report an internal informational notice. */
+extern void internal_inform PARAMS((const char *, ...))  __attribute__((__format__ (printf, 1, 2)));
+
+/* Debugging functions, not enabled in released version. */
+extern char *strescape PARAMS((const char *));
+extern void itrace PARAMS((const char *, ...)) __attribute__ ((__format__ (printf, 1, 2)));
+extern void trace PARAMS((const char *, ...)) __attribute__ ((__format__ (printf, 1, 2)));
+
+/* Report an error having to do with command parsing or execution. */
+extern void command_error PARAMS((const char *, int, int, int));
+
+extern char *command_errstr PARAMS((int));
+
+/* Specific error message functions that eventually call report_error or
+   internal_error. */
+
+extern void err_badarraysub PARAMS((const char *));
+extern void err_unboundvar PARAMS((const char *));
+extern void err_readonly PARAMS((const char *));
+
+#endif /* !_ERROR_H_ */
diff --git a/eval.c b/eval.c
new file mode 100644
index 0000000..1d967da
--- /dev/null
+++ b/eval.c
@@ -0,0 +1,400 @@
+/* eval.c -- reading and evaluating commands. */
+
+/* Copyright (C) 1996-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include "bashansi.h"
+#include <stdio.h>
+
+#include <signal.h>
+
+#include "bashintl.h"
+
+#include "shell.h"
+#include "parser.h"
+#include "flags.h"
+#include "trap.h"
+
+#include "builtins/common.h"
+
+#include "input.h"
+#include "execute_cmd.h"
+
+#if defined (HISTORY)
+#  include "bashhist.h"
+#endif
+
+static void send_pwd_to_eterm PARAMS((void));
+static sighandler alrm_catcher PARAMS((int));
+
+/* Read and execute commands until EOF is reached.  This assumes that
+   the input source has already been initialized. */
+int
+reader_loop ()
+{
+  int our_indirection_level;
+  COMMAND * volatile current_command;
+
+  USE_VAR(current_command);
+
+  current_command = (COMMAND *)NULL;
+
+  our_indirection_level = ++indirection_level;
+
+  if (just_one_command)
+    reset_readahead_token ();
+
+  while (EOF_Reached == 0)
+    {
+      int code;
+
+      code = setjmp_nosigs (top_level);
+
+#if defined (PROCESS_SUBSTITUTION)
+      unlink_fifo_list ();
+#endif /* PROCESS_SUBSTITUTION */
+
+      /* XXX - why do we set this every time through the loop?  And why do
+	 it if SIGINT is trapped in an interactive shell? */
+      if (interactive_shell && signal_is_ignored (SIGINT) == 0 && signal_is_trapped (SIGINT) == 0)
+	set_signal_handler (SIGINT, sigint_sighandler);
+
+      if (code != NOT_JUMPED)
+	{
+	  indirection_level = our_indirection_level;
+
+	  switch (code)
+	    {
+	      /* Some kind of throw to top_level has occurred. */
+	    case FORCE_EOF:
+	    case ERREXIT:
+	    case EXITPROG:
+	      current_command = (COMMAND *)NULL;
+	      if (exit_immediately_on_error)
+		variable_context = 0;	/* not in a function */
+	      EOF_Reached = EOF;
+	      goto exec_done;
+
+	    case DISCARD:
+	      /* Make sure the exit status is reset to a non-zero value, but
+		 leave existing non-zero values (e.g., > 128 on signal)
+		 alone. */
+	      if (last_command_exit_value == 0)
+		set_exit_status (EXECUTION_FAILURE);
+	      if (subshell_environment)
+		{
+		  current_command = (COMMAND *)NULL;
+		  EOF_Reached = EOF;
+		  goto exec_done;
+		}
+	      /* Obstack free command elements, etc. */
+	      if (current_command)
+		{
+		  dispose_command (current_command);
+		  current_command = (COMMAND *)NULL;
+		}
+
+	      restore_sigmask ();
+	      break;
+
+	    default:
+	      command_error ("reader_loop", CMDERR_BADJUMP, code, 0);
+	    }
+	}
+
+      executing = 0;
+      if (temporary_env)
+	dispose_used_env_vars ();
+
+#if (defined (ultrix) && defined (mips)) || defined (C_ALLOCA)
+      /* Attempt to reclaim memory allocated with alloca (). */
+      (void) alloca (0);
+#endif
+
+      if (read_command () == 0)
+	{
+	  if (interactive_shell == 0 && read_but_dont_execute)
+	    {
+	      set_exit_status (EXECUTION_SUCCESS);
+	      dispose_command (global_command);
+	      global_command = (COMMAND *)NULL;
+	    }
+	  else if (current_command = global_command)
+	    {
+	      global_command = (COMMAND *)NULL;
+
+	      /* If the shell is interactive, expand and display $PS0 after reading a
+		 command (possibly a list or pipeline) and before executing it. */
+	      if (interactive && ps0_prompt)
+		{
+		  char *ps0_string;
+
+		  ps0_string = decode_prompt_string (ps0_prompt);
+		  if (ps0_string && *ps0_string)
+		    {
+		      fprintf (stderr, "%s", ps0_string);
+		      fflush (stderr);
+		    }
+		  free (ps0_string);
+		}
+
+	      current_command_number++;
+
+	      executing = 1;
+	      stdin_redir = 0;
+
+	      execute_command (current_command);
+
+	    exec_done:
+	      QUIT;
+
+	      if (current_command)
+		{
+		  dispose_command (current_command);
+		  current_command = (COMMAND *)NULL;
+		}
+	    }
+	}
+      else
+	{
+	  /* Parse error, maybe discard rest of stream if not interactive. */
+	  if (interactive == 0)
+	    EOF_Reached = EOF;
+	}
+      if (just_one_command)
+	EOF_Reached = EOF;
+    }
+  indirection_level--;
+  return (last_command_exit_value);
+}
+
+/* Pretty print shell scripts */
+int
+pretty_print_loop ()
+{
+  COMMAND *current_command;
+  char *command_to_print;
+  int code;
+  int global_posix_mode, last_was_newline;
+
+  global_posix_mode = posixly_correct;
+  last_was_newline = 0;
+  while (EOF_Reached == 0)
+    {
+      code = setjmp_nosigs (top_level);
+      if (code)
+        return (EXECUTION_FAILURE);
+      if (read_command() == 0)
+	{
+	  current_command = global_command;
+	  global_command = 0;
+	  posixly_correct = 1;			/* print posix-conformant */
+	  if (current_command && (command_to_print = make_command_string (current_command)))
+	    {
+	      printf ("%s\n", command_to_print);	/* for now */
+	      last_was_newline = 0;
+	    }
+	  else if (last_was_newline == 0)
+	    {
+	       printf ("\n");
+	       last_was_newline = 1;
+	    }
+	  posixly_correct = global_posix_mode;
+	  dispose_command (current_command);
+	}
+      else
+	return (EXECUTION_FAILURE);
+    }
+    
+  return (EXECUTION_SUCCESS);
+}
+
+static sighandler
+alrm_catcher(i)
+     int i;
+{
+  char *msg;
+
+  msg = _("\007timed out waiting for input: auto-logout\n");
+  write (1, msg, strlen (msg));
+
+  bash_logout ();	/* run ~/.bash_logout if this is a login shell */
+  jump_to_top_level (EXITPROG);
+  SIGRETURN (0);
+}
+
+/* Send an escape sequence to emacs term mode to tell it the
+   current working directory. */
+static void
+send_pwd_to_eterm ()
+{
+  char *pwd, *f;
+
+  f = 0;
+  pwd = get_string_value ("PWD");
+  if (pwd == 0)
+    f = pwd = get_working_directory ("eterm");
+  fprintf (stderr, "\032/%s\n", pwd);
+  free (f);
+}
+
+#if defined (ARRAY_VARS)
+/* Caller ensures that A has a non-zero number of elements */
+int
+execute_array_command (a, v)
+     ARRAY *a;
+     void *v;
+{
+  char *tag;
+  char **argv;
+  int argc, i;
+
+  tag = (char *)v;
+  argc = 0;
+  argv = array_to_argv (a, &argc);
+  for (i = 0; i < argc; i++)
+    {
+      if (argv[i] && argv[i][0])
+	execute_variable_command (argv[i], tag);
+    }
+  strvec_dispose (argv);
+  return 0;
+}
+#endif
+  
+static void
+execute_prompt_command ()
+{
+  char *command_to_execute;
+  SHELL_VAR *pcv;
+#if defined (ARRAY_VARS)
+  ARRAY *pcmds;
+#endif
+
+  pcv = find_variable ("PROMPT_COMMAND");
+  if (pcv  == 0 || var_isset (pcv) == 0 || invisible_p (pcv))
+    return;
+#if defined (ARRAY_VARS)
+  if (array_p (pcv))
+    {
+      if ((pcmds = array_cell (pcv)) && array_num_elements (pcmds) > 0)
+	execute_array_command (pcmds, "PROMPT_COMMAND");
+      return;
+    }
+  else if (assoc_p (pcv))
+    return;	/* currently don't allow associative arrays here */
+#endif
+
+  command_to_execute = value_cell (pcv);
+  if (command_to_execute && *command_to_execute)
+    execute_variable_command (command_to_execute, "PROMPT_COMMAND");
+}
+
+/* Call the YACC-generated parser and return the status of the parse.
+   Input is read from the current input stream (bash_input).  yyparse
+   leaves the parsed command in the global variable GLOBAL_COMMAND.
+   This is where PROMPT_COMMAND is executed. */
+int
+parse_command ()
+{
+  int r;
+
+  need_here_doc = 0;
+  run_pending_traps ();
+
+  /* Allow the execution of a random command just before the printing
+     of each primary prompt.  If the shell variable PROMPT_COMMAND
+     is set then its value (array or string) is the command(s) to execute. */
+  /* The tests are a combination of SHOULD_PROMPT() and prompt_again() 
+     from parse.y, which are the conditions under which the prompt is
+     actually printed. */
+  if (interactive && bash_input.type != st_string && parser_expanding_alias() == 0)
+    {
+#if defined (READLINE)
+      if (no_line_editing || (bash_input.type == st_stdin && parser_will_prompt ()))
+#endif
+        execute_prompt_command ();
+
+      if (running_under_emacs == 2)
+	send_pwd_to_eterm ();	/* Yuck */
+    }
+
+  current_command_line_count = 0;
+  r = yyparse ();
+
+  if (need_here_doc)
+    gather_here_documents ();
+
+  return (r);
+}
+
+/* Read and parse a command, returning the status of the parse.  The command
+   is left in the globval variable GLOBAL_COMMAND for use by reader_loop.
+   This is where the shell timeout code is executed. */
+int
+read_command ()
+{
+  SHELL_VAR *tmout_var;
+  int tmout_len, result;
+  SigHandler *old_alrm;
+
+  set_current_prompt_level (1);
+  global_command = (COMMAND *)NULL;
+
+  /* Only do timeouts if interactive. */
+  tmout_var = (SHELL_VAR *)NULL;
+  tmout_len = 0;
+  old_alrm = (SigHandler *)NULL;
+
+  if (interactive)
+    {
+      tmout_var = find_variable ("TMOUT");
+
+      if (tmout_var && var_isset (tmout_var))
+	{
+	  tmout_len = atoi (value_cell (tmout_var));
+	  if (tmout_len > 0)
+	    {
+	      old_alrm = set_signal_handler (SIGALRM, alrm_catcher);
+	      alarm (tmout_len);
+	    }
+	}
+    }
+
+  QUIT;
+
+  current_command_line_count = 0;
+  result = parse_command ();
+
+  if (interactive && tmout_var && (tmout_len > 0))
+    {
+      alarm(0);
+      set_signal_handler (SIGALRM, old_alrm);
+    }
+
+  return (result);
+}
diff --git a/examples/INDEX.html b/examples/INDEX.html
new file mode 100644
index 0000000..bcca1f9
--- /dev/null
+++ b/examples/INDEX.html
@@ -0,0 +1,426 @@
+<table border=1>
+  <tr>
+    <th>Path</th>
+    <th>Description</th>
+    <th>X-Ref</th>
+  </tr>
+  <tr>
+    <td>./obashdb</td>
+    <td>Deprecated sample implementation of a bash debugger</td>
+  </tr>
+  <tr>
+  </tr>
+  <tr>
+    <td>./complete</td>
+    <td>Shell completion code</td>
+  </tr>
+  <tr>
+  </tr>
+  <tr>
+    <td>./functions</td>
+    <td>Example functions</td>
+  </tr>
+  <tr>
+    <td>./functions/array-stuff</td>
+    <td>Various array functions (ashift, array_sort, reverse).</td>
+  </tr>
+  <tr>
+    <td>./functions/array-to-string</td>
+    <td>Convert an array to a string.</td>
+  </tr>
+  <tr>
+    <td>./functions/autoload</td>
+    <td>An almost ksh-compatible 'autoload' (no lazy load).</td>
+    <td>ksh</td>
+  </tr>
+  <tr>
+    <td>./functions/autoload.v2</td>
+    <td>An almost ksh-compatible 'autoload' (no lazy load).</td>
+    <td>ksh</td>
+  </tr>
+  <tr>
+    <td>./functions/autoload.v3</td>
+    <td>A more ksh-compatible 'autoload' (with lazy load).</td>
+    <td>ksh</td>
+  </tr>
+  <tr>
+    <td>./functions/autoload.v3</td>
+    <td>An updated ksh-compatible 'autoload'.</td>
+    <td>ksh</td>
+  </tr>
+  <tr>
+    <td>./functions/basename</td>
+    <td>A replacement for basename(1).</td>
+    <td>basename</td>
+  </tr>
+  <tr>
+    <td>./functions/csh-compat</td>
+    <td>A C-shell compatibility package.</td>
+    <td>csh</td>
+  </tr>
+  <tr>
+    <td>./functions/dirname</td>
+    <td>A replacement for dirname(1).</td>
+    <td>dirname</td>
+  </tr>
+  <tr>
+    <td>./functions/dirstack</td>
+    <td>Directory stack functions.</td>
+  </tr>
+  <tr>
+    <td>./functions/exitstat</td>
+    <td>Display the exit status of processes.</td>
+  </tr>
+  <tr>
+    <td>./functions/external</td>
+    <td>Like 'command' but FORCES use of external command.</td>
+  </tr>
+  <tr>
+    <td>./functions/fact</td>
+    <td>Recursive factorial function.</td>
+  </tr>
+  <tr>
+    <td>./functions/fstty</td>
+    <td>Front end to sync TERM changes to both stty(1) and readline 'bind'.</td>
+    <td>stty.bash</td>
+  </tr>
+  <tr>
+    <td>./functions/inetaddr</td>
+    <td>Internet address conversion (inet2hex & hex2inet).</td>
+  </tr>
+  <tr>
+    <td>./functions/inpath</td>
+    <td>Return zero if the argument is in the path and executable.</td>
+    <td>inpath</td>
+  </tr>
+  <tr>
+    <td>./functions/isnum2</td>
+    <td>Test user input on numeric values, with floating point.</td>
+  </tr>
+  <tr>
+    <td>./functions/isvalidip</td>
+    <td>Test user input for valid IP Addresses.</td>
+  </tr>
+  <tr>
+    <td>./functions/ksh-cd</td>
+    <td>ksh-like 'cd': cd [-LP] [dir [change]].</td>
+    <td>ksh</td>
+  </tr>
+  <tr>
+    <td>./functions/ksh-compat-test</td>
+    <td>ksh-like arithmetic test replacements.</td>
+    <td>ksh</td>
+  </tr>
+  <tr>
+    <td>./functions/kshenv</td>
+    <td>Functions and aliases to provide the beginnings of a ksh environment for bash.</td>
+    <td>ksh</td>
+  </tr>
+  <tr>
+    <td>./functions/login</td>
+    <td>Replace the 'login' and 'newgrp' builtins in old Bourne shells.</td>
+  </tr>
+  <tr>
+    <td>./functions/notify.bash</td>
+    <td>Notify when jobs change status.</td>
+  </tr>
+  <tr>
+    <td>./functions/README</td>
+    <td>README</td>
+  </tr>
+  <tr>
+    <td>./functions/seq</td>
+    <td>Generate a sequence from m to n, m defaults to 1.</td>
+  </tr>
+  <tr>
+    <td>./functions/seq2</td>
+    <td>Generate a sequence from m to n, m defaults to 1.</td>
+  </tr>
+  <tr>
+    <td>./functions/shcat</td>
+    <td>Readline-based pager.</td>
+    <td>cat, readline pager</td>
+  </tr>
+  <tr>
+    <td>./functions/shcat2</td>
+    <td>Readline-based pagers.</td>
+    <td>cat, readline pager</td>
+  </tr>
+  <tr>
+    <td>./functions/sort-pos-params</td>
+    <td>Sort the positional parameters.</td>
+  </tr>
+  <tr>
+    <td>./functions/substr</td>
+    <td>A function to emulate the ancient ksh builtin.</td>
+    <td>ksh</td>
+  </tr>
+  <tr>
+    <td>./functions/substr2</td>
+    <td>A function to emulate the ancient ksh builtin.</td>
+    <td>ksh</td>
+  </tr>
+  <tr>
+    <td>./functions/whatis</td>
+    <td>An implementation of the 10th Edition Unix sh builtin 'whatis(1)' command.</td>
+  </tr>
+  <tr>
+    <td>./functions/whence</td>
+    <td>An almost-ksh compatible 'whence(1)' command.</td>
+  </tr>
+  <tr>
+    <td>./functions/which</td>
+    <td>An emulation of 'which(1)' as it appears in FreeBSD.</td>
+  </tr>
+  <tr>
+    <td>./loadables/</td>
+    <td>Example loadable replacements</td>
+  </tr>
+  <tr>
+    <td>./loadables/basename.c</td>
+    <td>Return non-directory portion of pathname.</td>
+    <td>basename</td>
+  </tr>
+  <tr>
+    <td>./loadables/cat.c</td>
+    <td>cat(1) replacement with no options - the way cat was intended.</td>
+    <td>cat, readline pager</td>
+  </tr>
+  <tr>
+    <td>./loadables/dirname.c</td>
+    <td>Return directory portion of pathname.</td>
+    <td>dirname</td>
+  </tr>
+  <tr>
+    <td>./loadables/fdflags.c</td>
+    <td>Display or modify file descriptor flags</td>
+  </tr>
+  <tr>
+    <td>./loadables/finfo.c</td>
+    <td>Print file info.</td>
+  </tr>
+  <tr>
+    <td>./loadables/head.c</td>
+    <td>Copy first part of files.</td>
+  </tr>
+  <tr>
+    <td>./loadables/hello.c</td>
+    <td>Obligatory "Hello World" / sample loadable.</td>
+  </tr>
+  <tr>
+    <td>./loadables/id.c</td>
+    <td>POSIX.2 user identity.</td>
+  </tr>
+  <tr>
+    <td>./loadables/ln.c</td>
+    <td>Make links.</td>
+  </tr>
+  <tr>
+    <td>./loadables/logname.c</td>
+    <td>Print login name of current user.</td>
+  </tr>
+  <tr>
+    <td>./loadables/Makefile.in</td>
+    <td>Simple makefile for the sample loadable builtins.</td>
+  </tr>
+  <tr>
+    <td>./loadables/Makefile.inc.in</td>
+    <td>Sample makefile to use for loadable builtin development.</td>
+  </tr>
+  <tr>
+    <td>./loadables/mkdir.c</td>
+    <td>Make directories.</td>
+  </tr>
+  <tr>
+    <td>./loadables/mypid.c</td>
+    <td>Demonstrate how a loadable builtin can create and delete shell variables.</td>
+  </tr>
+  <tr>
+    <td>./loadables/necho.c</td>
+    <td>echo without options or argument interpretation.</td>
+  </tr>
+  <tr>
+    <td>./loadables/pathchk.c</td>
+    <td>Check pathnames for validity and portability.</td>
+  </tr>
+  <tr>
+    <td>./loadables/print.c</td>
+    <td>Loadable ksh-93 style print builtin.</td>
+  </tr>
+  <tr>
+    <td>./loadables/printenv.c</td>
+    <td>Minimal builtin clone of BSD printenv(1).</td>
+  </tr>
+  <tr>
+    <td>./loadables/push.c</td>
+    <td>Anyone remember TOPS-20?</td>
+  </tr>
+  <tr>
+    <td>./loadables/README</td>
+    <td>README</td>
+  </tr>
+  <tr>
+    <td>./loadables/realpath.c</td>
+    <td>Canonicalize pathnames, resolving symlinks.</td>
+  </tr>
+  <tr>
+    <td>./loadables/rm.c</td>
+    <td>Remove file.</td>
+  </tr>
+  <tr>
+    <td>./loadables/rmdir.c</td>
+    <td>Remove directory.</td>
+  </tr>
+  <tr>
+    <td>./loadables/setpgid.c</td>
+    <td>Set a child process's process group.
+  </tr>
+  <tr>
+    <td>./loadables/sleep.c</td>
+    <td>sleep for fractions of a second.</td>
+  </tr>
+  <tr>
+    <td>./loadables/stat.c</td>
+    <td>Load an associative array with stat information about a file.</td>
+  </tr>
+  <tr>
+    <td>./loadables/strftime.c</td>
+    <td>Loadable builtin interface to strftime(3).</td>
+  </tr>
+  <tr>
+    <td>./loadables/sync.c</td>
+    <td>Sync the disks by forcing pending filesystem writes to complete.</td>
+  </tr>
+  <tr>
+    <td>./loadables/tee.c</td>
+    <td>Duplicate standard input.</td>
+  </tr>
+  <tr>
+    <td>./loadables/template.c</td>
+    <td>Example template for loadable builtin.</td>
+  </tr>
+  <tr>
+    <td>./loadables/truefalse.c</td>
+    <td>True and false builtins.</td>
+  </tr>
+  <tr>
+    <td>./loadables/tty.c</td>
+    <td>Return terminal name.</td>
+  </tr>
+  <tr>
+    <td>./loadables/uname.c</td>
+    <td>Print system information.</td>
+  </tr>
+  <tr>
+    <td>./loadables/unlink.c</td>
+    <td>Remove a directory entry.</td>
+  </tr>
+  <tr>
+    <td>./loadables/whoami.c</td>
+    <td>Print out username of current user.</td>
+  </tr>
+  <tr>
+  </tr>
+  <tr>
+    <td>./loadables/perl/</td>
+    <td>Illustrate how to build a Perl interpreter into bash.</td>
+  </tr>
+  <tr>
+  </tr>
+  <tr>
+    <td>./misc</td>
+    <td>Miscellaneous</td>
+  </tr>
+  <tr>
+    <td>./misc/aliasconv.bash</td>
+    <td>Convert csh aliases to bash aliases and functions.</td>
+    <td>csh, xalias</td>
+  </tr>
+  <tr>
+    <td>./misc/aliasconv.sh</td>
+    <td>Convert csh aliases to bash aliases and functions.</td>
+    <td>csh, xalias</td>
+  </tr>
+  <tr>
+    <td>./misc/cshtobash</td>
+    <td>Convert csh aliases, environment variables, and variables to bash equivalents.</td>
+    <td>csh, xalias</td>
+  </tr>
+  <tr>
+    <td>./misc/README</td>
+    <td>README</td>
+  </tr>
+  <tr>
+  </tr>
+  <tr>
+    <td>./scripts</td>
+    <td>Example scripts</td>
+  </tr>
+  <tr>
+    <td>./scripts/cat.sh</td>
+    <td>Readline-based pager.</td>
+    <td>cat, readline pager</td>
+  </tr>
+  <tr>
+    <td>./scripts/center</td>
+    <td>Center - center a group of lines.</td>
+  </tr>
+  <tr>
+    <td>./scripts/inpath</td>
+    <td>Search $PATH for a file the same name as $1; return TRUE if found.</td>
+    <td>inpath</td>
+  </tr>
+  <tr>
+    <td>./scripts/README</td>
+    <td>README</td>
+  </tr>
+  <tr>
+    <td>./scripts/shprompt</td>
+    <td>Display a prompt and get an answer satisfying certain criteria.</td>
+    <td>ask</td>
+  </tr>
+  <tr>
+    <td>./scripts/spin.bash</td>
+    <td>Display a 'spinning wheel' to show progress.</td>
+  </tr>
+  <tr>
+    <td>./scripts/xterm_title</td>
+    <td>Print the contents of the xterm title bar.</td>
+  </tr>
+  <tr>
+    <td>./scripts/zprintf</td>
+    <td>Emulate printf (obsolete since it's now a bash builtin).</td>
+  </tr>
+  <tr>
+  </tr>
+  <tr>
+    <td>./startup-files</td>
+    <td>Example Start-up files.</td>
+  </tr>
+  <tr>
+    <td>./startup-files/Bash_aliases</td>
+    <td>Some useful aliases (Fox).</td>
+  </tr>
+  <tr>
+    <td>./startup-files/Bash_profile</td>
+    <td>Sample startup file for bash login shells (Fox).</td>
+  </tr>
+  <tr>
+    <td>./startup-files/bash-profile</td>
+    <td>Sample startup file for bash login shells (Ramey).</td>
+  </tr>
+  <tr>
+    <td>./startup-files/bashrc</td>
+    <td>Sample Bourne Again SHell init file (Ramey).</td>
+  </tr>
+  <tr>
+    <td>./startup-files/Bashrc.bfox</td>
+    <td>Sample Bourne Again SHell init file (Fox).</td>
+  </tr>
+  <tr>
+    <td>./startup-files/README</td>
+    <td>README</td>
+  </tr>
+  <tr>
+  </tr>
+</table>
diff --git a/examples/INDEX.txt b/examples/INDEX.txt
new file mode 100644
index 0000000..b47e211
--- /dev/null
+++ b/examples/INDEX.txt
@@ -0,0 +1,103 @@
+Path	Description	X-Ref
+./obashdb	Deprecated sample implementation of a bash debugger	
+
+./complete	Shell completion code	
+
+./functions	Example functions	
+./functions/array-stuff	Various array functions (ashift, array_sort, reverse).	
+./functions/array-to-string	Convert an array to a string.	
+./functions/autoload	An almost ksh-compatible 'autoload' (no lazy load).	ksh
+./functions/autoload.v2	An almost ksh-compatible 'autoload' (no lazy load).	ksh
+./functions/autoload.v3	A more ksh-compatible 'autoload' (with lazy load).	ksh
+./functions/autoload.v4	An updated ksh-compatible 'autoload'.	ksh
+./functions/basename	A replacement for basename(1).	basename
+./functions/csh-compat	A C-shell compatibility package.	csh
+./functions/dirname	A replacement for dirname(1).	dirname
+./functions/dirstack	Directory stack functions.
+./functions/exitstat	Display the exit status of processes.	
+./functions/external	Like 'command' but FORCES use of external command.	
+./functions/fact	Recursive factorial function.	
+./functions/fstty	Front end to sync TERM changes to both stty(1) and readline 'bind'.	stty.bash
+./functions/inetaddr	Internet address conversion (inet2hex & hex2inet).	
+./functions/inpath	Return zero if the argument is in the path and executable.	inpath
+./functions/isnum2	Test user input on numeric values, with floating point.	
+./functions/isvalidip	Test user input for valid IP Addresses.	
+./functions/ksh-cd	ksh-like 'cd': cd [-LP] [dir [change]].	ksh
+./functions/ksh-compat-test	ksh-like arithmetic test replacements.	ksh
+./functions/kshenv	Functions and aliases to provide the beginnings of a ksh environment for bash.	ksh
+./functions/login	Replace the 'login' and 'newgrp' builtins in old Bourne shells.	
+./functions/notify.bash	Notify when jobs change status.	
+./functions/README	README	
+./functions/seq	Generate a sequence from m to n, m defaults to 1.	
+./functions/seq2	Generate a sequence from m to n, m defaults to 1.	
+./functions/shcat	Readline-based pager.	cat, readline pager
+./functions/shcat2	Readline-based pagers.	cat, readline pager
+./functions/sort-pos-params	Sort the positional parameters.	
+./functions/substr	A function to emulate the ancient ksh builtin.	ksh
+./functions/substr2	A function to emulate the ancient ksh builtin.	ksh
+./functions/whatis	An implementation of the 10th Edition Unix sh builtin 'whatis(1)' command.	
+./functions/whence	An almost-ksh compatible 'whence(1)' command.	
+./functions/which	An emulation of 'which(1)' as it appears in FreeBSD.	
+
+./loadables/	Example loadable replacements	
+./loadables/basename.c	Return non-directory portion of pathname.	basename
+./loadables/cat.c	cat(1) replacement with no options - the way cat was intended.	cat, readline pager
+./loadables/dirname.c	Return directory portion of pathname.	dirname
+./loadables/fdflags.c	Display or modify file descriptor flags
+./loadables/finfo.c	Print file info.	
+./loadables/head.c	Copy first part of files.	
+./loadables/hello.c	Obligatory "Hello World" / sample loadable.	
+./loadables/id.c	POSIX.2 user identity.	
+./loadables/ln.c	Make links.	
+./loadables/logname.c	Print login name of current user.	
+./loadables/Makefile.in	Simple makefile for the sample loadable builtins.	
+./loadables/Makefile.inc.in	Sample makefile to use for loadable builtin development.
+./loadables/mkdir.c	Make directories.	
+./loadables/mypid.c	Demonstrate how a loadable builtin can create and delete shell variables.
+./loadables/necho.c	echo without options or argument interpretation.	
+./loadables/pathchk.c	Check pathnames for validity and portability.	
+./loadables/print.c	Loadable ksh-93 style print builtin.	
+./loadables/printenv.c	Minimal builtin clone of BSD printenv(1).
+./loadables/push.c	Anyone remember TOPS-20?
+./loadables/README	README
+./loadables/realpath.c	Canonicalize pathnames, resolving symlinks.
+./loadables/rm.c	Remove file.
+./loadables/rmdir.c	Remove directory.
+./loadables/setpgid.c	Set a child process's process group.
+./loadables/sleep.c	sleep for fractions of a second.
+./loadables/stat.c	Load an associative array with stat information about a file.
+./loadables/strftime.c	Loadable builtin interface to strftime(3).
+./loadables/sync.c	Sync the disks by forcing pending filesystem writes to complete.
+./loadables/tee.c	Duplicate standard input.
+./loadables/template.c	Example template for loadable builtin.
+./loadables/truefalse.c	True and false builtins.
+./loadables/tty.c	Return terminal name.
+./loadables/uname.c	Print system information.
+./loadables/unlink.c	Remove a directory entry.
+./loadables/whoami.c	Print out username of current user.
+
+./loadables/perl/	Illustrate how to build a Perl interpreter into bash.	
+
+./misc	Miscellaneous	
+./misc/aliasconv.bash	Convert csh aliases to bash aliases and functions.	csh, xalias
+./misc/aliasconv.sh	Convert csh aliases to bash aliases and functions.	csh, xalias
+./misc/cshtobash	Convert csh aliases, environment variables, and variables to bash equivalents.	csh, xalias
+./misc/README	README	
+
+./scripts	Example scripts	
+./scripts/cat.sh	Readline-based pager.	cat, readline pager
+./scripts/center	Center - center a group of lines.	
+./scripts/inpath	Search $PATH for a file the same name as $1; return TRUE if found.	inpath
+./scripts/shprompt	Display a prompt and get an answer satisfying certain criteria.	ask
+./scripts/spin.bash	Display a 'spinning wheel' to show progress.	
+./scripts/xterm_title	Print the contents of the xterm title bar.	
+./scripts/zprintf	Emulate printf (obsolete since it's now a bash builtin).	
+
+./startup-files	Example Start-up files.	
+./startup-files/Bash_aliases	Some useful aliases (Fox).	
+./startup-files/Bash_profile	Sample startup file for bash login shells (Fox).	
+./startup-files/bash-profile	Sample startup file for bash login shells (Ramey).	
+./startup-files/bashrc	Sample Bourne Again SHell init file (Ramey).	
+./startup-files/Bashrc.bfox	Sample Bourne Again SHell init file (Fox).	
+./startup-files/README	README	
+
diff --git a/examples/bash-completion/README b/examples/bash-completion/README
new file mode 100644
index 0000000..fb5e765
--- /dev/null
+++ b/examples/bash-completion/README
@@ -0,0 +1,7 @@
+Master source: https://github.com/scop/bash-completion
+
+This is the latest version of the bash-completion package, which provides
+programmable completion specifications for a large number of commands.
+
+If you are a vendor installing bash or preparing a package containing bash,
+please install the latest version of bash-completion when installing bash.
diff --git a/examples/bash-completion/bash-completion-2.5.tar.xz b/examples/bash-completion/bash-completion-2.5.tar.xz
new file mode 100644
index 0000000..f5b9079
--- /dev/null
+++ b/examples/bash-completion/bash-completion-2.5.tar.xz
diff --git a/examples/complete/bash_completion b/examples/complete/bash_completion
new file mode 100644
index 0000000..b0cf4a8
--- /dev/null
+++ b/examples/complete/bash_completion
@@ -0,0 +1,9401 @@
+#   bash_completion - programmable completion functions for bash 3.x
+#		      (backwards compatible with bash 2.05b)
+#
+#   $Id: bash_completion,v 1.872 2006/03/01 16:20:18 ianmacd Exp $
+#
+#   Copyright (C) Ian Macdonald <ian@caliban.org>
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software Foundation,
+#   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+#   The latest version of this software can be obtained here:
+#
+#   http://www.caliban.org/bash/index.shtml#completion
+#
+#   RELEASE: 20060301
+
+if [[ $- == *v* ]]; then
+	BASH_COMPLETION_ORIGINAL_V_VALUE="-v"
+else
+	BASH_COMPLETION_ORIGINAL_V_VALUE="+v"
+fi
+
+if [[ -n $BASH_COMPLETION_DEBUG ]]; then
+	set -v
+else
+	set +v
+fi
+
+# Alter the following to reflect the location of this file.
+#
+[ -n "$BASH_COMPLETION" ] || BASH_COMPLETION=/etc/bash_completion
+[ -n "$BASH_COMPLETION_DIR" ] || BASH_COMPLETION_DIR=/etc/bash_completion.d
+readonly BASH_COMPLETION BASH_COMPLETION_DIR
+
+# Set a couple of useful vars
+#
+UNAME=$( uname -s )
+# strip OS type and version under Cygwin (e.g. CYGWIN_NT-5.1 => Cygwin)
+UNAME=${UNAME/CYGWIN_*/Cygwin}
+RELEASE=$( uname -r )
+
+# features supported by bash 2.05 and higher
+if [ ${BASH_VERSINFO[0]} -eq 2 ] && [[ ${BASH_VERSINFO[1]} > 04 ]] ||
+   [ ${BASH_VERSINFO[0]} -gt 2 ]; then
+	declare -r bash205=$BASH_VERSION 2>/dev/null || :
+	default="-o default"
+	dirnames="-o dirnames"
+	filenames="-o filenames"
+fi
+# features supported by bash 2.05b and higher
+if [ ${BASH_VERSINFO[0]} -eq 2 ] && [[ ${BASH_VERSINFO[1]} = "05b" ]] ||
+   [ ${BASH_VERSINFO[0]} -gt 2 ]; then
+	declare -r bash205b=$BASH_VERSION 2>/dev/null || :
+	nospace="-o nospace"
+fi
+# features supported by bash 3.0 and higher
+if [ ${BASH_VERSINFO[0]} -gt 2 ]; then
+	declare -r bash3=$BASH_VERSION 2>/dev/null || :
+	bashdefault="-o bashdefault"
+	plusdirs="-o plusdirs"
+fi
+
+# Turn on extended globbing and programmable completion
+shopt -s extglob progcomp
+
+# A lot of the following one-liners were taken directly from the
+# completion examples provided with the bash 2.04 source distribution
+
+# Make directory commands see only directories
+complete -d pushd
+
+# The following section lists completions that are redefined later
+# Do NOT break these over multiple lines.
+#
+# START exclude -- do NOT remove this line
+complete -f -X '!*.?(t)bz?(2)' bunzip2 bzcat bzcmp bzdiff bzegrep bzfgrep bzgrep
+complete -f -X '!*.@(zip|ZIP|jar|JAR|exe|EXE|pk3|war|wsz|ear|zargo|xpi|sxw|ott)' unzip zipinfo
+complete -f -X '*.Z' compress znew
+complete -f -X '!*.@(Z|gz|tgz|Gz|dz)' gunzip zcmp zdiff zcat zegrep zfgrep zgrep zless zmore
+complete -f -X '!*.Z' uncompress
+complete -f -X '!*.@(gif|jp?(e)g|miff|tif?(f)|pn[gm]|p[bgp]m|bmp|xpm|ico|xwd|tga|pcx|GIF|JP?(E)G|MIFF|TIF?(F)|PN[GM]|P[BGP]M|BMP|XPM|ICO|XWD|TGA|PCX)' ee display
+complete -f -X '!*.@(gif|jp?(e)g|tif?(f)|png|p[bgp]m|bmp|x[bp]m|rle|rgb|pcx|fits|pm|GIF|JPG|JP?(E)G|TIF?(F)|PNG|P[BGP]M|BMP|X[BP]M|RLE|RGB|PCX|FITS|PM)' xv qiv
+complete -f -X '!*.@(@(?(e)ps|?(E)PS|pdf|PDF)?(.gz|.GZ|.bz2|.BZ2|.Z))' gv ggv kghostview
+complete -f -X '!*.@(dvi|DVI)?(.@(gz|Z|bz2))' xdvi
+complete -f -X '!*.@(dvi|DVI)?(.@(gz|bz2))' kdvi
+complete -f -X '!*.@(dvi|DVI)' dvips dviselect dvitype dvipdf advi dvipdfm dvipdfmx
+complete -f -X '!*.@(pdf|PDF)' acroread gpdf xpdf
+complete -f -X '!*.@(?(e)ps|?(E)PS|pdf|PDF)' kpdf
+complete -f -X '!*.@(@(?(e)ps|?(E)PS|pdf|PDF)?(.gz|.GZ)|cb(r|z)|CB(R|Z)|djv?(u)|DJV?(U)||dvi|DVI|gif|jp?(e)g|miff|tif?(f)|pn[gm]|p[bgp]m|bmp|xpm|ico|xwd|tga|pcx|GIF|JP?(E)G|MIFF|TIF?(F)|PN[GM]|P[BGP]M|BMP|XPM|ICO|XWD|TGA|PCX)' evince
+complete -f -X '!*.@(?(e)ps|?(E)PS)' ps2pdf
+complete -f -X '!*.texi*' makeinfo texi2html
+complete -f -X '!*.@(?(la)tex|?(LA)TEX|texi|TEXI|dtx|DTX|ins|INS)' tex latex slitex jadetex pdfjadetex pdftex pdflatex texi2dvi
+complete -f -X '!*.@(mp3|MP3)' mpg123 mpg321 madplay
+complete -f -X '!*.@(mp?(e)g|MP?(E)G|wma|avi|AVI|asf|vob|VOB|bin|dat|divx|DIVX|vcd|ps|pes|fli|flv|FLV|viv|rm|ram|yuv|mov|MOV|qt|QT|wmv|mp3|MP3|m4v|M4V|ogg|OGG|ogm|OGM|mp4|MP4|wav|WAV|asx|ASX|mng|MNG|srt)' xine aaxine fbxine kaffeine
+complete -f -X '!*.@(avi|asf|wmv)' aviplay
+complete -f -X '!*.@(rm?(j)|ra?(m)|smi?(l))' realplay
+complete -f -X '!*.@(mpg|mpeg|avi|mov|qt)' xanim
+complete -f -X '!*.@(ogg|OGG|m3u|flac|spx)' ogg123
+complete -f -X '!*.@(mp3|MP3|ogg|OGG|pls|m3u)' gqmpeg freeamp
+complete -f -X '!*.fig' xfig
+complete -f -X '!*.@(mid?(i)|MID?(I))' playmidi
+complete -f -X '!*.@(mid?(i)|MID?(I)|rmi|RMI|rcp|RCP|[gr]36|[GR]36|g18|G18|mod|MOD|xm|XM|it|IT|x3m|X3M)' timidity
+complete -f -X '*.@(o|so|so.!(conf)|a|rpm|gif|GIF|jp?(e)g|JP?(E)G|mp3|MP3|mp?(e)g|MPG|avi|AVI|asf|ASF|ogg|OGG|class|CLASS)' vi vim gvim rvim view rview rgvim rgview gview
+complete -f -X '*.@(o|so|so.!(conf)|a|rpm|gif|GIF|jp?(e)g|JP?(E)G|mp3|MP3|mp?(e)g|MPG|avi|AVI|asf|ASF|ogg|OGG|class|CLASS)' emacs
+complete -f -X '!*.@(exe|EXE|com|COM|scr|SCR|exe.so)' wine
+complete -f -X '!*.@(zip|ZIP|z|Z|gz|GZ|tgz|TGZ)' bzme
+complete -f -X '!*.@(?([xX]|[sS])[hH][tT][mM]?([lL]))' netscape mozilla lynx opera galeon curl dillo elinks amaya
+complete -f -X '!*.@(sxw|stw|sxg|sgl|doc|dot|rtf|txt|htm|html|odt|ott|odm)' oowriter
+complete -f -X '!*.@(sxi|sti|pps|ppt|pot|odp|otp)' ooimpress
+complete -f -X '!*.@(sxc|stc|xls|xlw|xlt|csv|ods|ots)' oocalc
+complete -f -X '!*.@(sxd|std|sda|sdd|odg|otg)' oodraw
+complete -f -X '!*.@(sxm|smf|mml|odf)' oomath
+complete -f -X '!*.odb' oobase
+complete -f -X '!*.rpm' rpm2cpio
+# FINISH exclude -- do not remove this line
+
+# start of section containing compspecs that can be handled within bash
+
+# user commands see only users
+complete -u su usermod userdel passwd chage write chfn groups slay w sux
+
+# group commands see only groups
+[ -n "$bash205" ] && complete -g groupmod groupdel newgrp 2>/dev/null
+
+# bg completes with stopped jobs
+complete -A stopped -P '%' bg
+
+# other job commands
+complete -j -P '%' fg jobs disown
+
+# readonly and unset complete with shell variables
+complete -v readonly unset
+
+# set completes with set options
+complete -A setopt set
+
+# shopt completes with shopt options
+complete -A shopt shopt
+
+# helptopics
+complete -A helptopic help
+
+# unalias completes with aliases
+complete -a unalias
+
+# bind completes with readline bindings (make this more intelligent)
+complete -A binding bind
+
+# type and which complete on commands
+complete -c command type which
+
+# builtin completes on builtins
+complete -b builtin
+
+# start of section containing completion functions called by other functions
+
+# This function checks whether we have a given program on the system.
+# No need for bulky functions in memory if we don't.
+#
+have()
+{
+	unset -v have
+	PATH=$PATH:/sbin:/usr/sbin:/usr/local/sbin type $1 &>/dev/null &&
+		have="yes"
+}
+
+# use GNU sed if we have it, since its extensions are still used in our code
+#
+[ $UNAME != Linux ] && have gsed && alias sed=gsed
+
+# This function checks whether a given readline variable
+# is `on'.
+#
+_rl_enabled() 
+{
+    [[ "$( bind -v )" = *$1+([[:space:]])on* ]]
+}
+
+# This function shell-quotes the argument
+quote()
+{
+	echo \'${1//\'/\'\\\'\'}\' #'# Help vim syntax highlighting
+}
+
+# This function quotes the argument in a way so that readline dequoting
+# results in the original argument
+quote_readline()
+{
+	local t="${1//\\/\\\\}"
+	echo \'${t//\'/\'\\\'\'}\' #'# Help vim syntax highlighting
+}
+
+# This function shell-dequotes the argument
+dequote()
+{
+	eval echo "$1"
+}
+
+
+# Get the word to complete
+# This is nicer than ${COMP_WORDS[$COMP_CWORD]}, since it handles cases
+# where the user is completing in the middle of a word.
+# (For example, if the line is "ls foobar",
+# and the cursor is here -------->   ^
+# it will complete just "foo", not "foobar", which is what the user wants.)
+_get_cword()
+{
+	if [[ "${#COMP_WORDS[COMP_CWORD]}" -eq 0 ]] || [[ "$COMP_POINT" == "${#COMP_LINE}" ]]; then
+		echo "${COMP_WORDS[COMP_CWORD]}"
+	else
+		local i
+		local cur="$COMP_LINE"
+		local index="$COMP_POINT"
+		for (( i = 0; i <= COMP_CWORD; ++i )); do
+			while [[ "${#cur}" -ge ${#COMP_WORDS[i]} ]] && [[ "${cur:0:${#COMP_WORDS[i]}}" != "${COMP_WORDS[i]}" ]]; do
+				cur="${cur:1}"
+				index="$(( index - 1 ))"
+			done
+			if [[ "$i" -lt "$COMP_CWORD" ]]; then
+				local old_size="${#cur}"
+				cur="${cur#${COMP_WORDS[i]}}"
+				local new_size="${#cur}"
+				index="$(( index - old_size + new_size ))"
+			fi
+		done
+
+		if [[ "${COMP_WORDS[COMP_CWORD]:0:${#cur}}" != "$cur" ]]; then
+			# We messed up! At least return the whole word so things keep working
+			echo "${COMP_WORDS[COMP_CWORD]}"
+		else
+			echo "${cur:0:$index}"
+		fi
+	fi
+}
+
+
+# This function performs file and directory completion. It's better than
+# simply using 'compgen -f', because it honours spaces in filenames.
+# If passed -d, it completes only on directories. If passed anything else,
+# it's assumed to be a file glob to complete on.
+#
+_filedir()
+{
+	local IFS=$'\t\n' xspec
+
+	_expand || return 0
+
+	local toks=( ) tmp
+	while read -r tmp; do
+		[[ -n $tmp ]] && toks[${#toks[@]}]=$tmp
+	done < <( compgen -d -- "$(quote_readline "$cur")" )
+
+	if [[ "$1" != -d ]]; then
+		xspec=${1:+"!*.$1"}
+		while read -r tmp; do
+			[[ -n $tmp ]] && toks[${#toks[@]}]=$tmp
+		done < <( compgen -f -X "$xspec" -- "$(quote_readline "$cur")" )
+	fi
+
+	COMPREPLY=( "${COMPREPLY[@]}" "${toks[@]}" )
+}
+
+# This function completes on signal names
+#
+_signals()
+{
+	local i
+
+	# standard signal completion is rather braindead, so we need
+	# to hack around to get what we want here, which is to
+	# complete on a dash, followed by the signal name minus
+	# the SIG prefix
+	COMPREPLY=( $( compgen -A signal SIG${cur#-} ))
+	for (( i=0; i < ${#COMPREPLY[@]}; i++ )); do
+		COMPREPLY[i]=-${COMPREPLY[i]#SIG}
+	done
+}
+
+# This function completes on configured network interfaces
+#
+_configured_interfaces()
+{
+	if [ -f /etc/debian_version ]; then
+		# Debian system
+		COMPREPLY=( $( sed -ne 's|^iface \([^ ]\+\).*$|\1|p' \
+			       /etc/network/interfaces ) )
+	elif [ -f /etc/SuSE-release ]; then
+		# SuSE system
+		COMPREPLY=( $( command ls \
+			/etc/sysconfig/network/ifcfg-* | \
+			sed -ne 's|.*ifcfg-\('$cur'.*\)|\1|p' ) )
+	elif [ -f /etc/pld-release ]; then
+		# PLD Linux
+		COMPREPLY=( $( command ls -B \
+			/etc/sysconfig/interfaces | \
+			sed -ne 's|.*ifcfg-\('$cur'.*\)|\1|p' ) )
+	else
+		# Assume Red Hat
+		COMPREPLY=( $( command ls \
+			/etc/sysconfig/network-scripts/ifcfg-* | \
+			sed -ne 's|.*ifcfg-\('$cur'.*\)|\1|p' ) )
+	fi
+}
+
+# This function completes on all available network interfaces
+# -a: restrict to active interfaces only
+# -w: restrict to wireless interfaces only
+#
+_available_interfaces()
+{
+	local cmd
+
+	if [ "${1:-}" = -w ]; then
+		cmd="iwconfig"
+	elif [ "${1:-}" = -a ]; then
+		cmd="ifconfig"
+	else
+		cmd="ifconfig -a"
+	fi
+
+	COMPREPLY=( $( eval $cmd 2>/dev/null | \
+		sed -ne 's|^\('$cur'[^[:space:][:punct:]]\{1,\}\).*$|\1|p') )
+}
+
+# This function expands tildes in pathnames
+#
+_expand()
+{
+	# FIXME: Why was this here?
+	# [ "$cur" != "${cur%\\}" ] && cur="$cur\\"
+
+	# expand ~username type directory specifications
+	if [[ "$cur" == \~*/* ]]; then
+		eval cur=$cur
+	elif [[ "$cur" == \~* ]]; then
+		cur=${cur#\~}
+		COMPREPLY=( $( compgen -P '~' -u $cur ) )
+		return ${#COMPREPLY[@]}
+	fi
+}
+
+# This function completes on process IDs.
+# AIX and Solaris ps prefers X/Open syntax.
+[ $UNAME = SunOS -o $UNAME = AIX ] &&
+_pids()
+{
+	COMPREPLY=( $( compgen -W '$( command ps -efo pid | sed 1d )' -- $cur ))
+} ||
+_pids()
+{
+	COMPREPLY=( $( compgen -W '$( command ps axo pid | sed 1d )' -- $cur ) )
+}
+
+# This function completes on process group IDs.
+# AIX and SunOS prefer X/Open, all else should be BSD.
+[ $UNAME = SunOS -o $UNAME = AIX ] &&
+_pgids()
+{
+	COMPREPLY=( $( compgen -W '$( command ps -efo pgid | sed 1d )' -- $cur ))
+} ||
+_pgids()
+{
+	COMPREPLY=( $( compgen -W '$( command ps axo pgid | sed 1d )' -- $cur ))
+}
+
+# This function completes on user IDs
+#
+_uids()
+{
+	if type getent &>/dev/null; then
+	    COMPREPLY=( $( getent passwd | \
+			    awk -F: '{if ($3 ~ /^'$cur'/) print $3}' ) )
+	elif type perl &>/dev/null; then
+	    COMPREPLY=( $( compgen -W '$( perl -e '"'"'while (($uid) = (getpwent)[2]) { print $uid . "\n" }'"'"' )' -- $cur ) )
+	else
+	    # make do with /etc/passwd
+	    COMPREPLY=( $( awk 'BEGIN {FS=":"} {if ($3 ~ /^'$cur'/) print $3}'\
+			    /etc/passwd ) )
+	fi
+}
+
+# This function completes on group IDs
+#
+_gids()
+{
+	if type getent &>/dev/null; then
+	    COMPREPLY=( $( getent group | \
+			    awk -F: '{if ($3 ~ /^'$cur'/) print $3}' ) )
+	elif type perl &>/dev/null; then
+	    COMPREPLY=( $( compgen -W '$( perl -e '"'"'while (($gid) = (getgrent)[2]) { print $gid . "\n" }'"'"' )' -- $cur ) )
+	else
+	    # make do with /etc/group
+	    COMPREPLY=( $( awk 'BEGIN {FS=":"} {if ($3 ~ /^'$cur'/) print $3}'\
+			    /etc/group ) )
+	fi
+}
+
+# This function completes on services
+#
+_services()
+{
+	local sysvdir famdir
+	[ -d /etc/rc.d/init.d ] && sysvdir=/etc/rc.d/init.d || sysvdir=/etc/init.d
+	famdir=/etc/xinetd.d
+	COMPREPLY=( $( builtin echo $sysvdir/!(*.rpmsave|*.rpmorig|*~|functions)) )
+
+	if [ -d $famdir ]; then
+		COMPREPLY=( "${COMPREPLY[@]}" $( builtin echo $famdir/!(*.rpmsave|*.rpmorig|*~)) )
+	fi
+
+	COMPREPLY=( $( compgen -W '${COMPREPLY[@]#@($sysvdir|$famdir)/}' -- $cur ) )
+}
+
+# This function complete on modules
+#
+_modules()
+{
+	local modpath
+	modpath=/lib/modules/$1
+	COMPREPLY=( $( command ls -R $modpath | \
+			sed -ne 's/^\('$cur'.*\)\.k\?o\(\|.gz\)$/\1/p') )
+}
+
+# this function complete on user:group format
+#
+_usergroup()
+{
+	local IFS=$'\n'
+	cur=${cur//\\\\ / }
+	if [[ $cur = *@(\\:|.)* ]] && [ -n "$bash205" ]; then
+		user=${cur%%*([^:.])}
+		COMPREPLY=( $(compgen -P ${user/\\\\} -g -- ${cur##*[.:]}) )
+	elif [[ $cur = *:* ]] && [ -n "$bash205" ]; then
+		COMPREPLY=( $( compgen -g -- ${cur##*[.:]} ) )
+	else
+		COMPREPLY=( $( compgen -S : -u -- $cur ) )
+	fi
+}
+
+# this function count the number of mandatory args
+#
+_count_args()
+{
+	args=1
+	for (( i=1; i < COMP_CWORD; i++ )); do
+		if [[ "${COMP_WORDS[i]}" != -* ]]; then
+			args=$(($args+1))
+		fi
+	done
+}
+
+# start of section containing completion functions for bash built-ins
+
+# bash alias completion
+#
+_alias()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=${COMP_WORDS[$COMP_CWORD]}
+
+	case "$COMP_LINE" in
+	*[^=])
+		COMPREPLY=( $( compgen -A alias -S '=' -- $cur ) )
+		;;
+	*=)
+		COMPREPLY=( "$( alias ${cur%=} 2>/dev/null | \
+			     sed -e 's|^alias '$cur'\(.*\)$|\1|' )" )
+		;;
+	esac
+}
+complete -F _alias $nospace alias
+
+# bash export completion
+#
+_export()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=${COMP_WORDS[$COMP_CWORD]}
+
+	case "$COMP_LINE" in
+	*=\$*)
+		COMPREPLY=( $( compgen -v -P '$' -- ${cur#*=\$} ) )
+		;;
+	*[^=])
+		COMPREPLY=( $( compgen -v -S '=' -- $cur ) )
+		;;
+	*=)
+		COMPREPLY=( "$( eval echo -n \"$`echo ${cur%=}`\" |
+			( echo -n \'
+			  sed -e 's/'\''/'\''\\\'\'''\''/g'
+			  echo -n \' ) )" )
+		;;
+	esac
+}
+complete -F _export $default $nospace export
+
+# bash shell function completion
+#
+_function()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	if [[ $1 == @(declare|typeset) ]]; then
+		if [ "$prev" = -f ]; then
+			COMPREPLY=( $( compgen -A function -- $cur ) )
+		elif [[ "$cur" == -* ]]; then
+			COMPREPLY=( $( compgen -W '-a -f -F -i -r -x -p' -- \
+				       $cur ) )
+		fi
+	elif [ $COMP_CWORD -eq 1 ]; then
+		COMPREPLY=( $( compgen -A function -- $cur ) )
+	else
+		COMPREPLY=( "() $( type -- ${COMP_WORDS[1]} | sed -e 1,2d )" )
+	fi
+}
+complete -F _function function declare typeset
+
+# bash complete completion
+#
+_complete()
+{
+	local cur prev options
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case $prev in
+		-o)
+			options="default dirnames filenames"
+			[ -n "$bash205b" ] && options="$options nospace"
+			[ -n "$bash3" ] && options="$options bashdefault plusdirs"
+			COMPREPLY=( $( compgen -W "$options" -- $cur ) )
+			return 0
+			;;
+
+		-A)
+			COMPREPLY=( $( compgen -W 'alias arrayvar binding \
+				builtin command directory disabled enabled \
+				export file function group helptopic hostname \
+				job keyword running service setopt shopt \
+				signal stopped user variable' -- $cur ) )
+			return 0
+			;;
+
+		-C)
+			COMPREPLY=( $( compgen -A command -- $cur ) )
+			return 0
+			;;
+		-F)
+			COMPREPLY=( $( compgen -A function -- $cur ) )
+			return 0
+			;;
+		-@(p|r))
+			COMPREPLY=( $( complete -p | sed -e 's|.* ||' | \
+					grep "^$cur" ) )
+			return 0
+			;;
+
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		# relevant options completion
+		options="-a -b -c -d -e -f -g -j -k -s -v -u -A -G -W -P -S -X -F -C"
+		[ -n "$bash205" ] && options="$options -o"
+		COMPREPLY=( $( compgen -W "$options" -- $cur ) )
+	else
+		COMPREPLY=( $( compgen -A command -- $cur ) )
+	fi
+}
+complete -F _complete complete
+
+# start of section containing completion functions for external programs
+
+# a little help for FreeBSD ports users
+[ $UNAME = FreeBSD ] && complete -W 'index search fetch fetch-list \
+	extract patch configure build install reinstall \
+	deinstall clean clean-depends kernel buildworld' make
+
+# This completes on a list of all available service scripts for the
+# 'service' command and/or the SysV init.d directory, followed by
+# that script's available commands
+#
+{ have service || [ -d /etc/init.d/ ]; } &&
+_service()
+{
+	local cur sysvdir
+
+	COMPREPLY=()
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+	cur=`_get_cword`
+
+	# don't complete for things like killall, ssh and mysql if it's
+	# the standalone command, rather than the init script
+	[[ ${COMP_WORDS[0]} != @(*init.d/!(functions|~)|service) ]] && return 0
+
+	# don't complete past 2nd token
+	[ $COMP_CWORD -gt 2 ] && return 0
+
+	[ -d /etc/rc.d/init.d ] && sysvdir=/etc/rc.d/init.d \
+				|| sysvdir=/etc/init.d
+
+	if [[ $COMP_CWORD -eq 1 ]] && [[ $prev == "service" ]]; then
+		_services
+	else
+		COMPREPLY=( $( compgen -W '`sed -ne "y/|/ /; \
+				s/^.*Usage.*{\(.*\)}.*$/\1/p" \
+				$sysvdir/${prev##*/} 2>/dev/null`' -- $cur ) )
+	fi
+
+	return 0
+} &&
+complete -F _service service
+[ -d /etc/init.d/ ] && complete -F _service $default \
+	$(for i in /etc/init.d/*; do echo ${i##*/}; done)
+
+# chown(1) completion
+#
+_chown()
+{
+	local cur
+	cur=`_get_cword`
+
+	# options completion
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-c -h -f -R -v --changes \
+		--dereference --no-dereference --from= --silent --quiet \
+		--reference= --recursive --verbose --help --version' -- $cur ) )
+	else
+		_count_args
+
+		case $args in
+			1)
+				_usergroup
+				;;
+			*)
+				_filedir
+				;;
+		esac
+	fi
+}
+complete -F _chown $filenames chown
+
+# chgrp(1) completion
+#
+_chgrp()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	cur=${cur//\\\\/}
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	# options completion
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-c -h -f -R -v --changes \
+		--dereference --no-dereference --silent --quiet \
+		--reference= --recursive --verbose --help --version' -- $cur ) )
+		return 0
+	fi
+
+	# first parameter on line or first since an option?
+	if [ $COMP_CWORD -eq 1 ] && [[ "$cur" != -* ]] || \
+	   [[ "$prev" == -* ]] && [ -n "$bash205" ]; then
+		local IFS=$'\n'
+		COMPREPLY=( $( compgen -g $cur 2>/dev/null ) )
+	else
+		_filedir || return 0
+	fi
+
+	return 0
+}
+complete -F _chgrp $filenames chgrp
+
+# umount(8) completion. This relies on the mount point being the third
+# space-delimited field in the output of mount(8)
+#
+_umount()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	OLDIFS="$IFS"
+	IFS="\n"
+	COMPREPLY=( $( compgen -W '$( mount | cut -d" " -f 3 )' -- $cur ) )
+	IFS="$OLDIFS"
+
+	return 0
+}
+complete -F _umount $dirnames umount
+
+# mount(8) completion. This will pull a list of possible mounts out of
+# /etc/{,v}fstab, unless the word being completed contains a ':', which
+# would indicate the specification of an NFS server. In that case, we
+# query the server for a list of all available exports and complete on
+# that instead.
+#
+_mount()
+{       local cur i sm host
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	[[ "$cur" == \\ ]] && cur="/"
+
+	for i in {,/usr}/{,s}bin/showmount; do [ -x $i ] && sm=$i && break; done
+
+	if [ -n "$sm" ] && [[ "$cur" == *:* ]]; then
+		COMPREPLY=( $( $sm -e ${cur%%:*} | sed 1d | \
+			       grep ^${cur#*:} | awk '{print $1}' ) )
+	elif [[ "$cur" == //* ]]; then
+		host=${cur#//}
+		host=${host%%/*}
+		if [ -n "$host" ]; then
+			COMPREPLY=( $( compgen -W "$( echo $( smbclient -d 0 -NL $host 2>/dev/null|
+			sed -ne '/^['"$'\t '"']*Sharename/,/^$/p' |
+			sed -ne '3,$s|^[^A-Za-z]*\([^'"$'\t '"']*\).*$|//'$host'/\1|p' ) )" -- "$cur" ) )
+		fi
+	elif [ -r /etc/vfstab ]; then
+		# Solaris
+		COMPREPLY=( $( awk '! /^[ \t]*#/ {if ($3 ~ /\//) print $3}' \
+				/etc/vfstab | grep "^$cur" ) )
+	elif [ ! -e /etc/fstab ]; then
+		# probably Cygwin
+		COMPREPLY=( $( mount | awk '! /^[ \t]*#/ {if ($3 ~ /\//) print $3}' \
+				 | grep "^$cur" ) )
+	else
+		# probably Linux
+		COMPREPLY=( $( awk '! /^[ \t]*#/ {if ($2 ~ /\//) print $2}' \
+				/etc/fstab | grep "^$cur" ) )
+	fi
+
+	return 0
+}
+complete -F _mount $default $filenames mount
+
+# Linux rmmod(8) completion. This completes on a list of all currently
+# installed kernel modules.
+#
+have rmmod && {
+_rmmod()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	COMPREPLY=( $( /sbin/lsmod | \
+		  awk '{if (NR != 1 && $1 ~ /^'$cur'/) print $1}' 2>/dev/null ))
+	return 0
+}
+complete -F _rmmod rmmod
+
+# Linux insmod(8), modprobe(8) and modinfo(8) completion. This completes on a
+# list of all available modules for the version of the kernel currently
+# running.
+#
+_insmod()
+{
+	local cur prev modpath
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	# behave like lsmod for modprobe -r
+	if [ $1 = "modprobe" ] &&
+	   [ "${COMP_WORDS[1]}" = "-r" ]; then
+		COMPREPLY=( $( /sbin/lsmod | \
+				awk '{if (NR != 1 && $1 ~ /^'$cur'/) print $1}' ) )
+		return 0
+	fi
+
+	# do filename completion if we're giving a path to a module
+	if [[ "$cur" == */* ]]; then
+		_filedir '@(?(k)o?(.gz))'
+		return 0
+	fi
+
+	if [ $COMP_CWORD -gt 1 ] && 
+	   [[ "${COMP_WORDS[COMP_CWORD-1]}" != -* ]]; then
+		# do module parameter completion
+		COMPREPLY=( $( /sbin/modinfo -p ${COMP_WORDS[1]} 2>/dev/null | \
+		       awk '{if ($1 ~ /^parm:/ && $2 ~ /^'$cur'/) { print $2 } \
+			else if ($1 !~ /:/ && $1 ~ /^'$cur'/) { print $1 }}' ) )
+	else
+		_modules $(uname -r)
+	fi
+
+	return 0
+}
+complete -F _insmod $filenames insmod modprobe modinfo
+}
+
+# man(1) completion
+#
+[ $UNAME = GNU -o $UNAME = Linux -o $UNAME = Darwin \
+  -o $UNAME = FreeBSD -o $UNAME = SunOS -o $UNAME = Cygwin \
+  -o $UNAME = OpenBSD ] &&
+_man()
+{
+	local cur prev sect manpath UNAME
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	_expand || return 0
+
+	# default completion if parameter contains /
+	if [[ "$cur" == */* ]]; then
+		_filedir
+		return 0
+	fi
+
+	UNAME=$( uname -s )
+	# strip OS type and version under Cygwin
+	UNAME=${UNAME/CYGWIN_*/Cygwin}
+	if [ $UNAME = GNU -o $UNAME = Linux -o $UNAME = FreeBSD \
+	     -o $UNAME = Cygwin ]; then
+		manpath=$( manpath 2>/dev/null || command man --path )
+	else
+		manpath=$MANPATH
+	fi
+
+	if [ -z "$manpath" ]; then
+		COMPREPLY=( $( compgen -c -- $cur ) )
+		return 0
+	fi
+
+	# determine manual section to search
+	[[ "$prev" == [0-9ln] ]] && sect=$prev || sect='*'
+
+	manpath=$manpath:
+	if [ -n "$cur" ]; then
+		manpath="${manpath//://*man$sect/$cur* } ${manpath//://*cat$sect/$cur* }"
+	else
+		manpath="${manpath//://*man$sect/ } ${manpath//://*cat$sect/ }"
+	fi
+		
+	# redirect stderr for when path doesn't exist
+	COMPREPLY=( $( eval command ls "$manpath" 2>/dev/null ) )
+	# weed out directory path names and paths to man pages
+	COMPREPLY=( ${COMPREPLY[@]##*/?(:)} )
+	# strip suffix from man pages
+	COMPREPLY=( ${COMPREPLY[@]%.@(gz|bz2)} )
+	COMPREPLY=( $( compgen -W '${COMPREPLY[@]%.*}' -- "${cur//\\\\/}" ) )
+
+	[[ "$prev" != [0-9ln] ]] && _filedir '[0-9ln]'
+
+	return 0
+}
+[ $UNAME = GNU -o $UNAME = Linux -o $UNAME = Darwin \
+  -o $UNAME = FreeBSD -o $UNAME = SunOS -o $UNAME = Cygwin \
+  -o $UNAME = OpenBSD ] && \
+complete -F _man $filenames man apropos whatis
+
+# renice(8) completion
+#
+_renice()
+{
+	local command cur curopt i
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	command=$1
+
+	i=0
+	# walk back through command line and find last option
+	while [ $i -le $COMP_CWORD -a ${#COMPREPLY[@]} -eq 0 ]; do
+		curopt=${COMP_WORDS[COMP_CWORD-$i]}
+		case "$curopt" in
+		-u)
+			COMPREPLY=( $( compgen -u -- $cur ) )
+			;;
+		-g)
+			_pgids
+			;;
+		-p|$command)
+			_pids
+			;;
+		esac
+		i=$(( ++i ))
+	done
+}
+complete -F _renice renice
+
+# kill(1) completion
+#
+_kill()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	if [ $COMP_CWORD -eq 1 ] && [[ "$cur" == -* ]]; then
+		# return list of available signals
+		_signals
+	else
+		# return list of available PIDs
+		_pids
+	fi
+}
+complete -F _kill kill
+
+# Linux and FreeBSD killall(1) completion.
+#
+[ $UNAME = Linux -o $UNAME = FreeBSD ] &&
+_killall()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	if [ $COMP_CWORD -eq 1 ] && [[ "$cur" == -* ]]; then
+		_signals
+	else
+		COMPREPLY=( $( compgen -W '$( command ps axo command | \
+			      sed -ne "1d; s/^\[\?\([^-][^] ]*\).*$/\1/p" | \
+			      sed -e "s/.*\///" )' -- $cur ) )
+	fi
+
+	return 0
+}
+[ $UNAME = Linux -o $UNAME = FreeBSD ] && complete -F _killall killall pkill
+
+# Linux and FreeBSD pgrep(1) completion.
+#
+[ $UNAME = Linux -o $UNAME = FreeBSD ] &&
+_pgrep()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	COMPREPLY=( $( compgen -W '$( command ps axo command | \
+		      sed -ne "1d; s/^\[\?\([^-][^] ]*\).*$/\1/p" | \
+		      sed -e "s/.*\///" )' -- $cur ) )
+
+	return 0
+}
+[ $UNAME = Linux -o $UNAME = FreeBSD ] && complete -F _pgrep pgrep
+# Linux pidof(8) completion.
+[ $UNAME = Linux ] && complete -F _pgrep pidof
+
+# GNU find(1) completion. This makes heavy use of ksh style extended
+# globs and contains Linux specific code for completing the parameter
+# to the -fstype option.
+#
+_find()
+{
+	local cur prev i exprfound onlyonce
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+	-@(max|min)depth)
+		COMPREPLY=( $( compgen -W '0 1 2 3 4 5 6 7 8 9' -- $cur ) )
+		return 0
+		;;
+	-?(a|c)newer|-fls|-fprint?(0|f)|-?(i)?(l)name|-?(i)wholename)
+		_filedir
+		return 0
+		;;
+	-fstype)
+		# this is highly non-portable
+		[ -e /proc/filesystems ] &&
+		COMPREPLY=( $( cut -d$'\t' -f 2 /proc/filesystems | \
+				grep "^$cur" ) )
+		return 0
+		;;
+	-gid)
+		_gids
+		return 0
+		;;
+	-group)
+		if [ -n "$bash205" ]; then
+			COMPREPLY=( $( compgen -g -- $cur 2>/dev/null) )
+		fi
+		return 0
+		;;
+	-?(x)type)
+		COMPREPLY=( $( compgen -W 'b c d p f l s' -- $cur ) )
+		return 0
+		;;
+	-uid)
+		_uids
+		return 0
+		;;
+	-user)
+		COMPREPLY=( $( compgen -u -- $cur ) )
+		return 0
+		;;
+	-exec|-ok)
+		COMP_WORDS=(COMP_WORDS[0] $cur)
+		COMP_CWORD=1
+		_command
+		return 0
+		;;
+	-[acm]min|-[acm]time|-?(i)?(l)name|-inum|-?(i)path|-?(i)regex| \
+	-links|-perm|-size|-used|-printf)
+		# do nothing, just wait for a parameter to be given
+		return 0
+		;;
+	esac
+
+	_expand || return 0
+
+	# set exprfound to 1 if there is already an expression present
+	for i in ${COMP_WORDS[@]}; do
+		[[ "$i" = [-\(\),\!]* ]] && exprfound=1 && break
+	done
+
+	# handle case where first parameter is not a dash option
+	if [ "$exprfound" != 1 ] && [[ "$cur" != [-\(\),\!]* ]]; then
+		_filedir -d
+		return 0
+	fi
+
+	# complete using basic options
+	COMPREPLY=( $( compgen -W '-daystart -depth -follow -help -maxdepth \
+			-mindepth -mount -noleaf -version -xdev -amin -anewer \
+			-atime -cmin -cnewer -ctime -empty -false -fstype \
+			-gid -group -ilname -iname -inum -ipath -iregex \
+			-wholename \
+			-links -lname -mmin -mtime -name -newer -nouser \
+			-nogroup -perm -regex -size -true -type -uid -used \
+			-user -xtype -exec -fls -fprint -fprint0 -fprintf -ok \
+			-print -print0 -printf -prune -ls' -- $cur ) )
+
+	# this removes any options from the list of completions that have
+	# already been specified somewhere on the command line, as long as
+	# these options can only be used once (in a word, "options", in
+	# opposition to "tests" and "actions", as in the find(1) manpage).
+	onlyonce=' -daystart -depth -follow -help -maxdepth -mindepth -mount \
+		   -noleaf -version -xdev '
+	COMPREPLY=( $( echo "${COMP_WORDS[@]}" | \
+		       (while read -d ' ' i; do
+			    [ "$i" == "" ] ||
+			    [ "${onlyonce/ ${i%% *} / }" == "$onlyonce" ] &&
+			    continue
+			    # flatten array with spaces on either side,
+			    # otherwise we cannot grep on word boundaries of
+			    # first and last word
+			    COMPREPLY=" ${COMPREPLY[@]} "
+			    # remove word from list of completions
+			    COMPREPLY=( ${COMPREPLY/ ${i%% *} / } )
+			done
+			echo "${COMPREPLY[@]}")
+		  ) )
+	
+	_filedir
+	
+	return 0
+}
+complete -F _find $filenames find
+
+# Linux iwconfig(8) completion
+#
+[ $UNAME = Linux ] && have iwconfig &&
+_iwconfig()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+	
+	case $prev in
+		mode)
+			COMPREPLY=( $( compgen -W 'managed ad-hoc master \
+				repeater secondary monitor' -- $cur ) )
+			return 0
+			;;
+		essid)
+			COMPREPLY=( $( compgen -W 'on off any' -- $cur ) )
+			if [ -n "${COMP_IWLIST_SCAN:-}" ]; then
+				COMPREPLY=( "${COMPREPLY[@]}" \
+					$( iwlist ${COMP_WORDS[1]} scan | \
+					awk -F '"' '/ESSID/ {print $2}' | \
+					grep "^$cur" ))
+			fi
+			return 0
+			;;
+		nwid)
+			COMPREPLY=( $( compgen -W 'on off' -- $cur ) )
+			return 0
+			;;
+		channel)
+			COMPREPLY=( $( iwlist ${COMP_WORDS[1]} channel | \
+				awk '/^[[:space:]]*Channel/ {print $2}' | \
+				grep "^$cur" ) )
+			return 0
+			;;
+
+		freq)
+			COMPREPLY=( $( iwlist ${COMP_WORDS[1]} channel | \
+				awk '/^[[:space:]]*Channel/ {print $4"G"}' | \
+				grep "^$cur" ) )
+			return 0
+			;;
+		ap)
+			COMPREPLY=( $( compgen -W 'on off any' -- $cur ) )
+			if [ -n "${COMP_IWLIST_SCAN:-}" ]; then
+				COMPREPLY=( "${COMPREPLY[@]}" \
+					$( iwlist ${COMP_WORDS[1]} scan | \
+					awk -F ': ' '/Address/ {print $2}' | \
+					grep "^$cur" ) )
+			fi
+			return 0
+			;;
+		rate)
+			COMPREPLY=( $( compgen -W 'auto fixed' -- $cur ) )
+			COMPREPLY=( "${COMPREPLY[@]}" \
+				$( iwlist ${COMP_WORDS[1]} rate | \
+				awk '/^[[:space:]]*[0-9]/ {print $1"M"}' | \
+				grep "^$cur" ) )
+			return 0
+			;;
+		rts)
+			COMPREPLY=( $( compgen -W 'auto fixed off' -- $cur ) )
+			return 0
+			;;
+		frag)
+			COMPREPLY=( $( compgen -W 'auto fixed off' -- $cur ) )
+			return 0
+			;;
+		key)
+			COMPREPLY=( $( compgen -W 'off on open restricted' -- $cur ) )
+			return 0
+			;;
+		enc)
+			COMPREPLY=( $( compgen -W 'off on open restricted' -- $cur ) )
+			return 0
+			;;
+		power)
+			COMPREPLY=( $( compgen -W 'period timeout off on' -- $cur ) )
+			return 0
+			;;
+		txpower)
+			COMPREPLY=( $( compgen -W 'off on auto' -- $cur ) )
+			return 0
+			;;
+		retry)
+			COMPREPLY=( $( compgen -W 'limit lifetime' -- $cur ) )
+			return 0
+			;;
+	esac
+
+	if [ $COMP_CWORD -eq 1 ]; then
+		if [[ "$cur" == -* ]]; then
+			COMPREPLY=( $( compgen -W '--help --version' -- $cur ) ) 
+		else
+			_available_interfaces -w
+		fi
+	else
+		COMPREPLY=( $( compgen -W 'essid nwid mode freq channel sens mode \
+			ap nick rate rts frag enc key power txpower commit' -- $cur ) ) 
+	fi
+
+} &&
+complete -F _iwconfig iwconfig
+
+# Linux iwlist(8) completion
+#
+[ $UNAME = Linux ] && have iwlist &&
+_iwlist()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+	
+	if [ $COMP_CWORD -eq 1 ]; then
+		if [[ "$cur" == -* ]]; then
+			COMPREPLY=( $( compgen -W '--help --version' -- $cur ) ) 
+		else
+			_available_interfaces -w
+		fi
+	else
+		COMPREPLY=( $( compgen -W 'scan scanning freq frequency \
+			channel rate bit bitrate key enc encryption power \
+			txpower retry ap accesspoint peers event' -- $cur ) ) 
+	fi
+} &&
+complete -F _iwlist iwlist
+
+# Linux iwspy(8) completion
+#
+[ $UNAME = Linux ] && have iwspy &&
+_iwspy()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	if [ $COMP_CWORD -eq 1 ]; then
+		if [[ "$cur" == -* ]]; then
+			COMPREPLY=( $( compgen -W '--help --version' -- $cur ) ) 
+		else
+			_available_interfaces -w
+		fi
+	else
+		COMPREPLY=( $( compgen -W 'setthr getthr off' -- $cur ) ) 
+	fi
+} &&
+complete -F _iwspy iwspy
+
+# Linux iwpriv(8) completion
+#
+[ $UNAME = Linux ] && have iwpriv &&
+_iwpriv()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		roam)
+			COMPREPLY=( $( compgen -W 'on off' -- $cur ) )
+			return 0
+			;;
+		port)
+			COMPREPLY=( $( compgen -W 'ad-hoc managed' -- $cur ) )
+			return 0
+			;;
+	esac
+
+	if [ $COMP_CWORD -eq 1 ]; then
+		if [[ "$cur" == -* ]]; then
+			COMPREPLY=( $( compgen -W '--help --version' -- $cur ) ) 
+		else
+			_available_interfaces -w
+		fi
+	else
+		COMPREPLY=( $( compgen -W '--all roam port' -- $cur ) ) 
+	fi
+} &&
+complete -F _iwpriv iwpriv
+
+# RedHat & Debian GNU/Linux if{up,down} completion
+#
+[ $UNAME = Linux ] && { have ifup || have ifdown; } &&
+_ifupdown()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	if [ $COMP_CWORD -eq 1 ]; then
+		_configured_interfaces
+		COMPREPLY=( $(compgen -W '${COMPREPLY[@]}' -- "$cur") )
+       fi
+
+       return 0
+} &&
+complete -F _ifupdown ifup ifdown
+[ $UNAME = Linux ] && have ifstatus && complete -F _ifupdown ifstatus
+
+# Linux ipsec(8) completion (for FreeS/WAN)
+#
+[ $UNAME = Linux ] && have ipsec &&
+_ipsec()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	
+	if [ $COMP_CWORD -eq 1 ]; then
+		COMPREPLY=( $( compgen -W 'auto barf eroute klipsdebug look \
+					   manual pluto ranbits rsasigkey \
+					   setup showdefaults showhostkey spi \
+					   spigrp tncfg whack' -- $cur ) )
+		return 0
+	fi
+
+	case ${COMP_WORDS[1]} in
+	auto)
+		COMPREPLY=( $( compgen -W '--asynchronous --up --add --delete \
+					   --replace --down --route --unroute \
+					   --ready --status --rereadsecrets' \
+					-- $cur ) )
+		;;
+	manual)
+		COMPREPLY=( $( compgen -W '--up --down --route --unroute \
+					   --union' -- $cur ) )
+		;;
+	ranbits)
+		COMPREPLY=( $( compgen -W '--quick --continuous --bytes' \
+					  -- $cur ) )
+		;;
+	setup)
+		COMPREPLY=( $( compgen -W '--start --stop --restart' -- $cur ) )
+		;;
+
+	*)
+		;;
+	esac
+
+	return 0
+} &&
+complete -F _ipsec ipsec
+
+# Postfix completion.
+#
+have postfix && {
+# postfix(1)
+#
+_postfix()
+{
+	local cur prev
+
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	if [[ $cur == '-' ]]; then
+		COMPREPLY=(-c -D -v)
+		return 0
+	fi
+	if [[ $prev == '-c' ]]; then
+		_filedir -d
+		return 0
+	fi
+	if [[ $prev == '-D' ]]; then
+		COMPREPLY=( $( compgen -W 'start' -- "`get_cword`" ) )
+		return 0
+	fi
+	COMPREPLY=( $( compgen -W 'start stop reload abort flush check' -- \
+		"`get_cword`" ) )
+}
+complete -F _postfix postfix
+
+# postalias(1) and postmap(1)
+#
+_postmap()
+{
+	local cur prev len idx
+
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	if [[ $cur == '-' ]]; then
+		COMPREPLY=(-N -f -i -n -o -p -r -v -w -c -d -q)
+		return 0
+	fi
+	if [[ $prev == '-c' ]]; then
+		_filedir -d
+		return 0
+	fi
+	if [[ $prev == -[dq] ]]; then
+		return 0
+	fi
+
+	if [[ "$cur" == *:* ]]; then
+	       	COMPREPLY=( $( compgen -f -- ${cur#*:} ) )
+	else
+		len=${#cur}
+		idx=0
+		for pval in $( /usr/sbin/postconf -m ); do
+			if [[ "$cur" == "${pval:0:$len}" ]]; then
+				COMPREPLY[$idx]="$pval:"
+				idx=$(($idx+1))
+			fi
+		done
+		if [[ $idx -eq 0 ]]; then
+			COMPREPLY=( $( compgen -f -- "$cur" ) )
+		fi
+	fi
+	return 0
+}
+complete -F _postmap postmap postalias
+
+# postcat(1)
+#
+_postcat()
+{
+	local cur prev pval len idx qfile
+
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	if [[ $cur == '-' ]]; then
+		COMPREPLY=(-c -q -v)
+		return 0
+	fi
+	if [[ $prev == '-c' ]]; then
+		_filedir -d
+		return 0
+	fi
+
+	qfile=0
+	for idx in "${COMP_WORDS[@]}"; do
+		[[ "$idx" = -q ]] && qfile=1 && break
+	done
+	if [[ $qfile == 1 ]]; then
+		len=${#cur}
+		idx=0
+		for pval in $( mailq | \
+			sed -e '1d; $d; /^[^0-9A-Z]\|^$/d; s/[* !].*$//' ); do
+			if [[ "$cur" == "${pval:0:$len}" ]]; then
+				COMPREPLY[$idx]=$pval
+				idx=$(($idx+1))
+			fi
+		done
+		return 0
+	else
+		_filedir
+		return 0
+	fi
+}
+complete -F _postcat postcat
+
+# postconf(1)
+#
+_postconf()
+{
+	local cur prev pval len idx eqext
+
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+	if [[ $cur == '-' ]]; then
+		COMPREPLY=(-c -d -e -h -m -l -n -v)
+		return 0
+	fi
+	if [[ $prev == '-c' ]]; then
+		_filedir -d
+		return 0
+	fi
+	if [[ $prev == '-e' ]]; then
+		cur=${cur#[\"\']}
+		eqext='='
+	fi
+	len=${#cur}
+	idx=0
+	for pval in $( /usr/sbin/postconf | cut -d ' ' -f 1 ); do
+		if [[ "$cur" == "${pval:0:$len}" ]]; then
+			COMPREPLY[$idx]="$pval$eqext"
+			idx=$(($idx+1))
+		fi
+	done
+	return 0
+}
+complete -F _postconf postconf
+
+# postsuper(1)
+#
+_postsuper()
+{
+	local cur prev pval len idx
+
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	if [[ $cur == '-' ]]; then
+		COMPREPLY=(-c -d -h -H -p -r -s -v)
+		return 0
+	fi
+	case $prev in
+	-[dr])
+		len=${#cur}
+		idx=0
+		for pval in $( echo ALL; mailq | \
+			sed -e '1d; $d; /^[^0-9A-Z]\|^$/d; s/[* !].*$//' ); do
+			if [[ "$cur" == "${pval:0:$len}" ]]; then
+				COMPREPLY[$idx]=$pval
+				idx=$(($idx+1))
+			fi
+		done
+		return 0
+		;;
+	-h)
+		len=${#cur}
+		idx=0
+		for pval in $( echo ALL; mailq | \
+			sed -e '1d; $d; /^[^0-9A-Z]\|^$/d; s/[* ].*$//; /!$/d' ); do
+			if [[ "$cur" == "${pval:0:$len}" ]]; then
+				COMPREPLY[$idx]=$pval
+				idx=$(($idx+1))
+			fi
+		done
+		return 0
+		;;
+	-H)
+		len=${#cur}
+		idx=0
+		for pval in $( echo ALL; mailq | \
+			sed -e '1d; $d; /^[^0-9A-Z]\|^$/d; /^[0-9A-Z]*[* ]/d; s/!.*$//' ); do
+			if [[ "$cur" == "${pval:0:$len}" ]]; then
+				COMPREPLY[$idx]=$pval
+				idx=$(($idx+1))
+			fi
+		done
+		return 0
+		;;
+	esac
+	COMPREPLY=( $( compgen -W 'hold incoming active deferred' -- $cur ) )
+	return 0
+}
+complete -F _postsuper postsuper
+}
+
+# cvs(1) completion
+#
+have cvs && {
+set_prefix()
+{
+	[ -z ${prefix:-} ] || prefix=${cur%/*}/
+	[ -r ${prefix:-}CVS/Entries ] || prefix=""
+}
+
+get_entries()
+{
+	local IFS=$'\n'
+	[ -r ${prefix:-}CVS/Entries ] && \
+	entries=$(cut -d/ -f2 -s ${prefix:-}CVS/Entries)
+}
+
+get_modules()
+{
+	if [ -n "$prefix" ]; then 
+		COMPREPLY=( $( command ls -d ${cvsroot}/${prefix}/!(CVSROOT) ) )
+	else
+		COMPREPLY=( $( command ls -d ${cvsroot}/!(CVSROOT) ) )
+	fi
+}
+
+_cvs()
+{
+	local cur count mode i cvsroot cvsroots pwd
+	local -a flags miss files entries changed newremoved
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	count=0
+	for i in "${COMP_WORDS[@]}"; do
+		[ $count -eq $COMP_CWORD ] && break
+		# Last parameter was the CVSROOT, now go back to mode selection
+		if [ "${COMP_WORDS[((count))]}" == "$cvsroot" -a "$mode" == "cvsroot" ]; then
+			mode=""
+		fi
+		if [ -z "$mode" ]; then
+			case $i in
+			-d)
+				mode=cvsroot
+				cvsroot=${COMP_WORDS[((count+1))]}
+				;;
+			@(ad?(d)|new))
+				mode=add
+				;;
+			@(adm?(in)|rcs))
+				mode=admin
+				;;
+			ann?(notate))
+				mode=annotate
+				;;
+			@(checkout|co|get))
+				mode=checkout
+				;;
+			@(com?(mit)|ci))
+				mode=commit
+				;;
+			di?(f?(f)))
+				mode=diff
+				;;
+			ex?(p?(ort)))
+				mode=export
+				;;
+			?(un)edit)
+				mode=$i
+				;;
+			hi?(s?(tory)))
+				mode=history
+				;;
+			im?(p?(ort)))
+				mode=import
+				;;
+			re?(l?(ease)))
+				mode=release
+				;;
+			?(r)log)
+				mode=log
+				;;
+			@(rdiff|patch))
+				mode=rdiff
+				;;
+			@(remove|rm|delete))
+				mode=remove
+				;;
+			@(rtag|rfreeze))
+				mode=rtag
+				;;
+			st?(at?(us)))
+				mode=status
+				;;
+			@(tag|freeze))
+				mode=tag
+				;;
+			up?(d?(ate)))
+				mode=update
+				;;
+			*)
+				;;
+			esac
+		elif [[ "$i" = -* ]]; then
+			flags=( "${flags[@]}" $i )
+		fi
+		count=$((++count))
+	done
+
+	case "$mode" in
+	add)
+		if [[ "$cur" != -* ]]; then
+			set_prefix
+			if [ $COMP_CWORD -gt 1 -a -r ${prefix:-}CVS/Entries ]; then
+				get_entries
+				[ -z "$cur" ] && \
+				files=$( command ls -Ad !(CVS) ) || \
+				files=$( command ls -d ${cur}* 2>/dev/null )
+				for i in "${entries[@]}"; do
+					files=( ${files[@]/#$i//} )
+				done
+				COMPREPLY=( $( compgen -W '${files[@]}' -- \
+					       $cur ) )
+			fi
+		else
+			COMPREPLY=( $( compgen -W '-k -m' -- $cur ) )
+		fi
+		;;
+	admin)
+		if [[ "$cur" = -* ]]; then
+			COMPREPLY=( $( compgen -W '-i -a -A -e -b -c -k -l -u \
+						   -L -U -m -M -n -N -o -q -I \
+						   -s -t -t- -T -V -x -z' -- \
+					$cur ) )
+		fi
+		;;
+	annotate)
+		if [[ "$cur" = -* ]]; then
+			COMPREPLY=( $( compgen -W '-D -F -f -l -R -r' -- $cur ) )
+		else
+			get_entries
+			COMPREPLY=( $( compgen -W '${entries[@]}' -- $cur ) )
+		fi
+		;;
+	checkout)
+		if [[ "$cur" != -* ]]; then
+			[ -z "$cvsroot" ] && cvsroot=$CVSROOT
+			COMPREPLY=( $( cvs -d "$cvsroot" co -c 2> /dev/null | \
+					awk '{print $1}' ) )
+			COMPREPLY=( $( compgen -W '${COMPREPLY[@]}' -- $cur ) )
+		else
+			COMPREPLY=( $( compgen -W '-A -N -P -R -c -f -l -n -p \
+						  -s -r -D -d -k -j' -- $cur ) )
+		fi
+		;;
+	commit)
+		set_prefix
+
+		if [[ "$cur" != -* ]] && [ -r ${prefix:-}CVS/Entries ]; then
+			# if $COMP_CVS_REMOTE is not null, 'cvs commit' will
+			# complete on remotely checked-out files (requires
+			# passwordless access to the remote repository
+			if [ -n "${COMP_CVS_REMOTE:-}" ]; then
+				# this is the least computationally intensive
+				# way found so far, but other changes
+				# (something other than changed/removed/new)
+				# may be missing
+				changed=( $( cvs -q diff --brief 2>&1 | \
+				sed -ne 's/^Files [^ ]* and \([^ ]*\) differ$/\1/p' ) )
+				newremoved=( $( cvs -q diff --brief 2>&1 | \
+				sed -ne 's/^cvs diff: \([^ ]*\) .*, no comparison available$/\1/p' ) )
+				COMPREPLY=( $( compgen -W '${changed[@]:-} \
+						   ${newremoved[@]:-}' -- $cur ) )
+			else
+				_filedir
+			fi
+		else
+			COMPREPLY=( $( compgen -W '-n -R -l -f -F -m -r' -- \
+				       $cur ) )
+		fi
+		;;
+	cvsroot)
+		if [ -r ~/.cvspass ]; then
+			# Ugly escaping because of bash treating ':' specially
+			cvsroots=$( sed 's/^[^ ]* //; s/:/\\:/g' ~/.cvspass )
+			COMPREPLY=( $( compgen -W '$cvsroots' -- $cur ) )
+		fi
+		;;
+	export)
+		if [[ "$cur" != -* ]]; then
+			[ -z "$cvsroot" ] && cvsroot=$CVSROOT
+			COMPREPLY=( $( cvs -d "$cvsroot" co -c | awk '{print $1}' ) )
+			COMPREPLY=( $( compgen -W '${COMPREPLY[@]}' -- $cur ) )
+		else
+			COMPREPLY=( $( compgen -W '-N -f -l -R -n \
+						  -r -D -d -k' -- $cur ) )
+		fi
+		;;
+	diff)
+		if [[ "$cur" == -* ]]; then
+			_longopt diff
+		else
+			get_entries
+			COMPREPLY=( $( compgen -W '${entries[@]:-}' -- $cur ) )
+		fi
+		;;
+	remove)
+		if [[ "$cur" != -* ]]; then
+			set_prefix
+			if [ $COMP_CWORD -gt 1 -a -r ${prefix:-}CVS/Entries ]; then
+				get_entries
+				# find out what files are missing
+				for i in "${entries[@]}"; do
+					[ ! -r "$i" ] && miss=( "${miss[@]}" $i )
+				done
+				COMPREPLY=( $(compgen -W '${miss[@]:-}' -- $cur) )
+			fi
+		else
+			COMPREPLY=( $( compgen -W '-f -l -R' -- $cur ) )
+		fi
+		;;
+	import)
+		if [[ "$cur" != -* ]]; then
+			# starts with same algorithm as checkout
+			[ -z "$cvsroot" ] && cvsroot=$CVSROOT
+			prefix=${cur%/*}
+			if [ -r ${cvsroot}/${prefix} ]; then
+				get_modules
+				COMPREPLY=( ${COMPREPLY[@]#$cvsroot} )
+				COMPREPLY=( ${COMPREPLY[@]#\/} )
+			fi
+			pwd=$( pwd )
+			pwd=${pwd##*/}
+			COMPREPLY=( $( compgen -W '${COMPREPLY[@]} $pwd' -- \
+				       $cur ) )
+		else
+			COMPREPLY=( $( compgen -W '-d -k -I -b -m -W' -- $cur ))
+		fi
+		;;
+	update)
+		if [[ "$cur" = -* ]]; then
+			COMPREPLY=( $( compgen -W '-A -P -C -d -f -l -R -p \
+						   -k -r -D -j -I -W' -- \
+						   $cur ) )
+		fi
+		;;
+	"")
+		COMPREPLY=( $( compgen -W 'add admin annotate checkout ci co \
+					   commit diff delete edit export \
+					   freeze get history import log new \
+					   patch rcs rdiff release remove \
+					   rfreeze rlog rm rtag stat status \
+					   tag unedit up update -H -Q -q -b \
+					   -d -e -f -l -n -t -r -v -w -x -z \
+					   --help --version' -- $cur ) )
+		;;
+	*)
+		;;
+	esac
+	
+	return 0
+}
+complete -F _cvs $default cvs
+}
+
+have rpm && {
+# helper functions for rpm completion
+#
+_rpm_installed_packages()
+{
+	local ver nodig nosig
+
+	if [ -r /var/log/rpmpkgs -a \
+		/var/log/rpmpkgs -nt /var/lib/rpm/Packages ]; then
+		# using RHL 7.2 or later - this is quicker than querying the DB
+		COMPREPLY=( $( sed -ne \
+		's|^\('$cur'.*\)-[0-9a-zA-Z._]\+-[0-9a-z.@]\+.*\.rpm$|\1|p' \
+				/var/log/rpmpkgs ) )
+	else
+		nodig=""
+		nosig=""
+		ver=$(rpm --version)
+		ver=${ver##* }
+	  
+		if [[ "$ver" > "4.0.4" ]]; then
+			nodig="--nodigest"
+		fi
+		if [[ "$ver" > "4.0.99" ]]; then
+			nosig="--nosignature"
+		fi
+
+		COMPREPLY=( $( rpm -qa $nodig $nosig | sed -ne \
+		's|^\('$cur'.*\)-[0-9a-zA-Z._]\+-[0-9a-z.@]\+$|\1|p' ) )
+	fi
+}
+
+_rpm_groups()
+{
+	local IFS=$'\t'
+	# remove trailing backslash, or grep will complain
+	cur=${cur%"\\"}
+	COMPREPLY=( $( rpm -qa $nodig $nosig --queryformat '%{group}\n' | \
+		       grep "^$cur" ) )
+	# backslash escape spaces and translate newlines to tabs
+	COMPREPLY=( $( echo "${COMPREPLY[@]}" | sed 's/ /\\ /g' | tr '\n' '\t' ) )
+}
+
+# rpm(8) completion
+# 
+_rpm()
+{
+	local cur prev ver nodig nosig
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+	nodig=""
+	nosig=""
+	ver=$(rpm --version); ver=${ver##* }
+  
+	if [[ "$ver" > "4.0.4" ]]; then
+		nodig="--nodigest"
+	fi
+	if [[ "$ver" > "4.0.99" ]]; then
+		nosig="--nosignature"
+	fi
+
+	if [ $COMP_CWORD -eq 1 ]; then
+		# first parameter on line
+		case "$cur" in
+		-b*)
+			COMPREPLY=( $( compgen -W '-ba -bb -bc -bi -bl -bp -bs'\
+				       -- $cur ) )
+			;;
+		-t*)
+			COMPREPLY=( $( compgen -W '-ta -tb -tc -ti -tl -tp -ts'\
+				       -- $cur ) )
+			;;
+		--*)
+			COMPREPLY=( $( compgen -W '--help --version --initdb \
+			--checksig --recompile --rebuild --resign --addsign \
+			--rebuilddb --showrc --setperms --setugids --tarbuild \
+			--eval --install --upgrade --query --freshen --erase \
+			--verify --querytags --rmsource --rmspec --clean \
+			--import' -- $cur ) )
+			;;
+		*)
+			COMPREPLY=( $( compgen -W '-b -e -F -i -q -t -U -V' \
+				       -- $cur ) )
+			;;
+		esac
+
+	return 0
+	fi
+
+	case "$prev" in
+	--@(@(db|exclude)path|prefix|relocate|root))
+		_filedir -d
+		return 0
+		;;
+	--eval)
+		# get a list of macros
+		COMPREPLY=( $( sed -ne 's|^\(%'${cur#\%}'[^ '$'\t'']*\).*$|\1|p' \
+			       /usr/lib/rpm/macros ) )
+		return 0
+		;;
+	--pipe)
+		COMPREPLY=( $( compgen -c -- $cur ) )
+		return 0
+		;;
+	--rcfile)
+		_filedir
+		return 0
+		;;
+	--specfile)
+		# complete on .spec files
+		_filedir spec
+		return 0
+		;;
+	--whatprovides)
+		if [[ "$cur" == */* ]]; then
+			_filedir
+		else
+		# complete on capabilities
+			COMPREPLY=( $( rpm -qa $nodig $nosig --queryformat \
+					'%{providename}\n' | grep "^$cur" ) )
+		fi
+		return 0
+		;;
+	--whatrequires)
+		# complete on capabilities
+		COMPREPLY=( $( rpm -qa $nodig $nosig --queryformat \
+				'%{requirename}\n' | grep "^$cur" ) )
+		return 0
+		;;
+	esac
+
+	case "${COMP_WORDS[1]}" in
+	-@([iFU]*|-install|-freshen|-upgrade))
+		if [[ "$cur" == -* ]]; then
+			COMPREPLY=( $( compgen -W '--percent --force --test \
+			--replacepkgs --replacefiles --root --excludedocs \
+			--includedocs --noscripts --rcfile --ignorearch \
+			--dbpath --prefix --ignoreos --nodeps --allfiles \
+			--ftpproxy --ftpport --justdb --httpproxy --httpport \
+			--noorder --relocate --badreloc --notriggers \
+			--excludepath --ignoresize --oldpackage --define \
+			--eval --pipe --queryformat --repackage --nosuggests \
+			--nodigest --nosignature' -- $cur ) )
+		else
+			_filedir 'rpm'
+		fi
+		;;
+	-@(e|-erase))
+		if [[ "$cur" == -* ]]; then
+			COMPREPLY=( $( compgen -W '--allmatches --noscripts \
+			--notriggers --nodeps --test --repackage' -- $cur ) )
+		else
+			_rpm_installed_packages
+		fi
+		;;
+	-@(q*|-query))
+		# check whether we're doing file completion
+		if [ "${COMP_LINE#* -*([^ -])f}" != "$COMP_LINE" ]; then
+		    if [[ "$cur" == -* ]]; then
+			COMPREPLY=( $( compgen -W '--scripts --root \
+				--rcfile --requires --ftpport --ftpproxy \
+				--httpproxy --httpport --provides --triggers \
+				--dump --changelog --dbpath \
+				--last --filesbypkg \
+				--info --list --state \
+				--docfiles --configfiles --queryformat \
+				--conflicts --obsoletes \
+				--nodigest --nosignature \
+				--triggerscripts' -- $cur ) )
+		    else
+			_filedir
+		    fi
+		elif [ "${COMP_LINE#* -*([^ -])g}" != "$COMP_LINE" ]; then
+			_rpm_groups
+		elif [ "${COMP_LINE#* -*([^ -])p}" != "$COMP_LINE" ]; then
+			# uninstalled package completion
+			if [[ "$cur" == -* ]]; then
+				COMPREPLY=( $( compgen -W '--scripts --root \
+				--rcfile --whatprovides --whatrequires \
+				--requires --triggeredby --ftpport --ftpproxy \
+				--httpproxy --httpport --provides --triggers \
+				--dump --changelog --dbpath --filesbypkg \
+				--define --eval --pipe --showrc --info --list \
+				--state --docfiles --configfiles --queryformat\
+				--conflicts --obsoletes --nodigest \
+				--nosignature' -- $cur ) )
+			else
+				_filedir 'rpm'
+			fi
+		else
+			# installed package completion
+			if [[ "$cur" == -* ]]; then
+				COMPREPLY=( $( compgen -W '--scripts --root \
+				--rcfile --whatprovides --whatrequires \
+				--requires --triggeredby --ftpport --ftpproxy \
+				--httpproxy --httpport --provides --triggers \
+				--dump --changelog --dbpath --specfile \
+				--querybynumber --last --filesbypkg --define \
+				--eval --pipe --showrc --info --list --state \
+				--docfiles --configfiles --queryformat \
+				--conflicts --obsoletes --pkgid --hdrid \
+				--fileid --tid --nodigest --nosignature \
+				--triggerscripts' -- $cur ) )
+			elif [ "${COMP_LINE#* -*([^ -])a}" == "$COMP_LINE" ]; then
+				_rpm_installed_packages
+			fi
+		fi
+		;;
+	-@(K*|-checksig))
+		if [[ "$cur" == -* ]]; then
+			COMPREPLY=( $( compgen -W '--nopgp --nogpg --nomd5 \
+					--nodigest --nosignature' -- $cur ) )
+		else
+			_filedir 'rpm'
+		fi
+		;;
+	-@([Vy]*|-verify))
+		if [[ "$cur" == -* ]]; then
+			COMPREPLY=( $( compgen -W '--root --rcfile --dbpath \
+			--nodeps --nogroup --nolinkto --nomode --nomtime \
+			--nordev --nouser --nofiles --noscripts --nomd5 \
+			--querytags --specfile --whatrequires --whatprovides \
+			--nodigest --nosignature' -- $cur ) )
+		# check whether we're doing file completion
+		elif [ "${COMP_LINE#* -*([^ -])f}" != "$COMP_LINE" ]; then
+			_filedir
+		elif [ "${COMP_LINE#* -*([^ -])g}" != "$COMP_LINE" ]; then
+			_rpm_groups
+		elif [ "${COMP_LINE#* -*([^ -])p}" != "$COMP_LINE" ]; then
+			_filedir 'rpm'
+		else
+			_rpm_installed_packages
+		fi
+		;;
+	-[bt]*)
+		if [[ "$cur" == -* ]]; then
+			COMPREPLY=( $( compgen -W '--short-circuit --timecheck \
+			--clean --rmsource --rmspec --test --sign --buildroot \
+			--target -- buildarch --buildos --nobuild --nodeps \
+			--nodirtokens' -- $cur ) )
+		elif [[ ${COMP_WORDS[1]} == -b* ]]; then
+			_filedir 'spec'
+		else
+			_filedir '@(tgz|tar.@(gz|bz2))'
+		fi
+		;;
+	--re@(build|compile))
+		if [[ "$cur" == -* ]]; then
+			COMPREPLY=( $( compgen -W '--nodeps --rmsource \
+			  --rmspec --sign --nodirtokens --target' -- $cur ) )
+		else
+			_filedir '?(no)src.rpm'
+		fi
+		;;
+	--tarbuild)
+		_filedir '@(tgz|tar.@(gz|bz2))'
+		;;
+	--@(re|add)sign)
+		_filedir 'rpm'
+		;;
+	--set@(perms|gids))
+		_rpm_installed_packages
+		;;
+	--@(clean|rms@(ource|pec)))
+		if [[ "$cur" == -* ]]; then
+			COMPREPLY=( $( compgen -W '--clean --rmsource \
+					--rmspec' -- $cur ) )
+		else
+			_filedir 'spec'
+		fi
+		;;
+	--@(import|dbpath|root))
+		if [[ "$cur" == -* ]]; then
+			COMPREPLY=( $( compgen -W '--import --dbpath --root' \
+					-- $cur ) )
+		else
+			_filedir
+		fi
+		;;
+	esac
+
+	return 0
+}
+complete -F _rpm $filenames rpm rpmbuild
+}
+
+# Debian apt-get(8) completion.
+#
+have apt-get &&
+_apt_get()
+{
+	local cur prev special i
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	for (( i=0; i < ${#COMP_WORDS[@]}-1; i++ )); do
+		if [[ ${COMP_WORDS[i]} == @(install|remove|purge|source|build-dep) ]]; then
+			special=${COMP_WORDS[i]}
+		fi
+	done
+
+	if [ -n "$special" ]; then
+		case $special in
+		remove|purge)
+			if [ -f /etc/debian_version ]; then
+				# Debian system
+				COMPREPLY=( $( _comp_dpkg_installed_packages \
+						$cur ) )
+			else
+				# assume RPM based
+				_rpm_installed_packages
+			fi
+			return 0
+			;;
+		*)
+			COMPREPLY=( $( apt-cache pkgnames $cur 2> /dev/null ) )
+			return 0
+			;;
+
+		esac
+	fi
+
+	case "$prev" in
+	    -@(c|-config-file))
+ 		     _filedir
+		     return 0
+		     ;;
+
+	    -@(t|-target-release|-default-release))
+		     COMPREPLY=( $( apt-cache policy | \
+				    grep "release.o=Debian,a=$cur" | \
+				    sed -e "s/.*a=\(\w*\).*/\1/" | uniq 2> /dev/null) )
+		     return 0
+		     ;;
+ 
+	esac
+
+	if [[ "$cur" == -* ]]; then
+
+		COMPREPLY=( $( compgen -W '-d -f -h -v -m -q -s -y \
+				-u -t -b -c -o --download-only --fix-broken \
+				--help --version --ignore-missing \
+				--fix-missing --no-download --quiet --simulate \
+				--just-print --dry-run --recon --no-act --yes \
+				--assume-yes --show-upgraded --only-source \
+				--compile --build --ignore-hold \
+				--target-release --no-upgrade --force-yes \
+				--print-uris --purge --reinstall \
+				--list-cleanup --default-release \
+				--trivial-only --no-remove --diff-only \
+				--tar-only --config-file --option --auto-remove' -- $cur ) )
+	else
+
+		COMPREPLY=( $( compgen -W 'update upgrade dselect-upgrade \
+				dist-upgrade install remove purge source \
+				build-dep check clean autoclean autoremove' \
+				-- $cur ) )
+
+	fi
+
+
+	return 0
+} &&
+complete -F _apt_get $filenames apt-get
+
+# Debian apt-cache(8) completion.
+#
+have apt-cache &&
+_apt_cache()
+{
+	local cur prev special i
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	
+	if [ "$cur" != show ]; then
+	    for (( i=0; i < ${#COMP_WORDS[@]}-1; i++ )); do
+		if [[ ${COMP_WORDS[i]} == @(add|depends|dotty|policy|rdepends|madison|show?(pkg|src|)) ]]; then
+		    special=${COMP_WORDS[i]}
+		fi
+	    done
+	fi
+
+
+	if [ -n "$special" ]; then
+	    case $special in
+		add)
+		    _filedir
+		    return 0
+		    ;;
+		
+ 		*)
+		    COMPREPLY=( $( apt-cache pkgnames $cur 2> /dev/null ) )
+		    return 0
+		    ;;
+		
+	    esac
+	fi
+
+
+	case "$prev" in
+	     -@(c|p|s|-config-file|-@(pkg|src)-cache))
+		     _filedir
+		     return 0
+		     ;;
+	     search)
+		     if [[ "$cur" != -* ]]; then
+			    return 0
+		     fi
+		     ;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+
+		COMPREPLY=( $( compgen -W '-h -v -p -s -q -i -f -a -g -c \
+				-o --help --version --pkg-cache --src-cache \
+				--quiet --important --full --all-versions \
+				--no-all-versions --generate --no-generate \
+				--names-only --all-names --recurse \
+				--config-file --option' -- $cur ) )
+	else
+
+		COMPREPLY=( $( compgen -W 'add gencaches show showpkg showsrc \
+				stats dump dumpavail unmet search search \
+				depends rdepends pkgnames dotty xvcg \
+				policy madison' -- $cur ) )
+
+	fi
+
+
+	return 0
+} &&
+complete -F _apt_cache $filenames apt-cache
+
+
+# Debian aptitude(1) completion
+#
+have aptitude && {
+have grep-status && {
+_comp_dpkg_hold_packages()
+{
+	grep-status -P -e "^$1" -a -FStatus 'hold' -n -s Package
+}
+} || {
+_comp_dpkg_hold_packages()
+{
+	grep -B 2 'hold' /var/lib/dpkg/status | grep "Package: $1" \
+		| cut -d\  -f2
+}
+}
+
+_aptitude()
+{
+	local cur dashoptions prev special i
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+
+	dashoptions='-S -u -i -h --help --version -s --simulate -d \
+		     --download-only -P --prompt -y --assume-yes -F \
+		     --display-format -O --sort -w --width -f -r -g \
+		     --with-recommends --with-suggests -R -G \
+		     --without-recommends --without-suggests -t \
+		     --target-release -V --show-versions -D --show-deps\
+		     -Z -v --verbose --purge-unused'
+
+	for (( i=0; i < ${#COMP_WORDS[@]}-1; i++ )); do
+	    if [[ ${COMP_WORDS[i]} == @(install|reinstall|hold|unhold|markauto|unmarkauto|dist-upgrade|full-upgrade|download|show|forbid-version|purge|remove|changelog|why|why-not|keep|keep-all) ]]; then
+		special=${COMP_WORDS[i]}
+	    fi
+	    #exclude some mutually exclusive options
+	    [[ ${COMP_WORDS[i]} == '-u' ]] && dashoptions=${dashoptions/-i}
+	    [[ ${COMP_WORDS[i]} == '-i' ]] && dashoptions=${dashoptions/-u}
+	done
+
+	if [[ -n "$special" ]]; then
+	   case $special in
+	       @(install|hold|markauto|unmarkauto|dist-upgrade|full-upgrade|download|show|changelog|why|why-not))
+		   COMPREPLY=( $( apt-cache pkgnames $cur 2> /dev/null ) )
+		   return 0
+		   ;;
+	       @(purge|remove|reinstall|forbid-version))
+  		   COMPREPLY=( $( _comp_dpkg_installed_packages $cur ) )
+		   return 0
+		   ;;
+	       unhold)
+  		   COMPREPLY=( $( _comp_dpkg_hold_packages $cur ) )
+		   return 0
+		   ;;
+
+	   esac
+	fi
+
+	case $prev in
+	    # don't complete anything if these options are found
+	    @(autoclean|clean|forget-new|search|upgrade|safe-upgrade|update|keep-all))
+		return 0
+		;;
+
+	    -S)
+		_filedir
+		return 0
+		;;
+
+	    -@(t|-target-release|-default-release))
+		COMPREPLY=( $( apt-cache policy | \
+		    grep "release.o=Debian,a=$cur" | \
+		    sed -e "s/.*a=\(\w*\).*/\1/" | uniq 2> /dev/null ) )
+		return 0
+		;;
+
+	esac
+
+	if [[ "$cur" == -* ]]; then
+	    COMPREPLY=( $( compgen -W "$dashoptions" -- $cur ) )
+	else
+	    COMPREPLY=( $( compgen -W 'update upgrade safe-upgrade forget-new clean \
+				       autoclean install reinstall remove \
+				       hold unhold purge markauto unmarkauto why why-not \
+				       dist-upgrade full-upgrade download search show \
+				       forbid-version changelog keep-all' -- $cur ) )
+	fi
+
+
+	return 0
+}
+complete -F _aptitude $default aptitude
+}
+
+# Debian apt-build(1) completion.
+#
+have apt-build &&
+_apt_build()
+{
+	local cur prev special i
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	for (( i=0; i < ${#COMP_WORDS[@]}-1; i++ )); do
+		if [[ ${COMP_WORDS[i]} == @(install|remove|source|info|clean) ]]; then
+			special=${COMP_WORDS[i]}
+		fi
+	done
+
+	if [ -n "$special" ]; then
+		case $special in
+		@(install|source|info))
+			COMPREPLY=( $( apt-cache pkgnames $cur 2> /dev/null ) )
+			return 0
+			;;
+		remove)
+			COMPREPLY=( $( _comp_dpkg_installed_packages \
+					$cur ) )
+			return 0
+			;;
+		*)
+			return 0
+			;;
+		esac
+	fi
+
+	case "$prev" in
+
+	     --@(patch|build-dir|repository-dir))
+		   _filedir
+		   return 0
+		   ;;
+ 
+	     -@(h|-help))
+		   return 0
+		   ;;
+
+	esac
+
+	if [[ "$cur" == -* ]]; then
+	    COMPREPLY=( $( compgen -W '--help --show-upgraded -u --build-dir \
+				  --repository-dir --build-only \
+				  --build-command --reinstall --rebuild \
+				  --remove-builddep --no-wrapper --purge \
+				  --patch --patch-strip -p --yes -y \
+				  --version -v --no-source' -- $cur ) )
+
+	else
+	    COMPREPLY=( $( compgen -W 'update upgrade install remove \
+				  source dist-upgrade world clean info \
+				  clean-build update-repository ' -- $cur ) )
+	fi
+
+
+	return 0
+} &&
+complete -F _apt_build $filenames apt-build
+
+# chsh(1) completion
+#
+_chsh()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	if [ "$prev" = "-s" ]; then
+	  if [ -f /etc/debian_version ]; then
+	    COMPREPLY=( $( </etc/shells ) )
+	  else
+	    COMPREPLY=( $( chsh -l | grep "^$cur" ) )
+	  fi
+	else
+	  COMPREPLY=( $( compgen -u -- $cur ) )
+	fi
+
+	return 0
+}
+complete -F _chsh chsh
+
+# chkconfig(8) completion
+#
+have chkconfig &&
+_chkconfig()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+	@([1-6]|--@(list|add|del)))
+		_services
+		return 0
+		;;
+	--level)
+		COMPREPLY=( $( compgen -W '1 2 3 4 5 6' -- $cur ) )
+		return 0
+		;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '--list --add --del --level' -- $cur ) )
+	else
+		if [ $COMP_CWORD -eq 2 -o $COMP_CWORD -eq 4 ]; then
+			COMPREPLY=( $( compgen -W 'on off reset' -- $cur ) )
+		else
+			_services
+		fi
+	fi
+} &&
+complete -F _chkconfig chkconfig
+
+# This function provides simple user@host completion
+#
+_user_at_host() {
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	if [[ $cur == *@* ]]; then
+		_known_hosts
+	else
+		COMPREPLY=( $( compgen -u -- "$cur" ) )
+	fi
+
+	return 0
+}
+shopt -u hostcomplete && complete -F _user_at_host $nospace talk ytalk finger
+
+# This function performs host completion based on ssh's known_hosts files,
+# defaulting to standard host completion if they don't exist.
+#
+_known_hosts()
+{
+       local cur curd ocur user suffix aliases global_kh user_kh hosts i host
+       local -a kh khd config
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	ocur=$cur
+
+	[ "$1" = -a ] || [ "$2" = -a ] && aliases='yes'
+	[ "$1" = -c ] || [ "$2" = -c ] && suffix=':'
+	[[ $cur == *@* ]] && user=${cur%@*}@ && cur=${cur#*@}
+	kh=()
+
+	# ssh config files
+	[ -r /etc/ssh/ssh_config ] &&
+	  config=( "${config[@]}" "/etc/ssh/ssh_config" )
+	[ -r "${HOME}/.ssh/config" ] &&
+	  config=( "${config[@]}" "${HOME}/.ssh/config" )
+	[ -r "${HOME}/.ssh2/config" ] &&
+	  config=( "${config[@]}" "${HOME}/.ssh2/config" )
+
+	if [ ${#config[@]} -gt 0 ]; then
+	    # expand path (if present) to global known hosts file
+	    global_kh=$( eval echo $( sed -ne 's/^[ \t]*[Gg][Ll][Oo][Bb][Aa][Ll][Kk][Nn][Oo][Ww][Nn][Hh][Oo][Ss][Tt][Ss][Ff][Ii][Ll][Ee]['"$'\t '"']*\(.*\)$/\1/p' "${config[@]}" ) )
+	    # expand path (if present) to user known hosts file
+	    user_kh=$( eval echo $( sed -ne 's/^[ \t]*[Uu][Ss][Ee][Rr][Kk][Nn][Oo][Ww][Nn][Hh][Oo][Ss][Tt][Ss][Ff][Ii][Ll][Ee]['"$'\t '"']*\(.*\)$/\1/p' "${config[@]}" ) )
+	fi
+
+	# Global known_hosts files
+	[ -r "$global_kh" ] &&
+	    kh=( "${kh[@]}" "$global_kh" )
+	[ -r /etc/ssh/ssh_known_hosts ] &&
+	    kh=( "${kh[@]}" /etc/ssh/ssh_known_hosts )
+	[ -r /etc/ssh/ssh_known_hosts2 ] &&
+	    kh=( "${kh[@]}" /etc/ssh/ssh_known_hosts2 )
+	[ -r /etc/known_hosts ] &&
+	    kh=( "${kh[@]}" /etc/known_hosts )
+	[ -r /etc/known_hosts2 ] &&
+	    kh=( "${kh[@]}" /etc/known_hosts2 )
+	[ -d /etc/ssh2/knownhosts ] &&
+	    khd=( "${khd[@]}" /etc/ssh2/knownhosts/*pub )
+
+	# User known_hosts files
+	[ -r "$user_kh" ] &&
+	    kh=( "${kh[@]}" "$user_kh" )
+	[ -r ~/.ssh/known_hosts ] &&
+	    kh=( "${kh[@]}" ~/.ssh/known_hosts )
+	[ -r ~/.ssh/known_hosts2 ] &&
+	    kh=( "${kh[@]}" ~/.ssh/known_hosts2 )
+	[ -d ~/.ssh2/hostkeys ] &&
+	    khd=( "${khd[@]}" ~/.ssh2/hostkeys/*pub )
+
+	# If we have known_hosts files to use
+	if [ ${#kh[@]} -gt 0 -o ${#khd[@]} -gt 0 ]; then
+	    # Escape slashes and dots in paths for awk
+	    cur=${cur//\//\\\/}
+	    cur=${cur//\./\\\.}
+	    curd=$cur
+
+	    if [[ "$cur" == [0-9]*.* ]]; then
+		# Digits followed by a dot - just search for that
+		cur="^$cur.*"
+	    elif [[ "$cur" == [0-9]* ]]; then
+		# Digits followed by no dot - search for digits followed
+		# by a dot
+		cur="^$cur.*\."
+	    elif [ -z "$cur" ]; then
+		# A blank - search for a dot or an alpha character
+		cur="[a-z.]"
+	    else
+		cur="^$cur"
+	    fi
+
+	    if [ ${#kh[@]} -gt 0 ]; then
+
+		# FS needs to look for a comma separated list
+		COMPREPLY=( $( awk 'BEGIN {FS=","}
+				/^[^|]/ {for (i=1; i<=2; ++i) { \
+				       gsub(" .*$", "", $i); \
+				       if ($i ~ /'$cur'/) {print $i} \
+				}}' "${kh[@]}" 2>/dev/null ) )
+	    fi
+	    if [ ${#khd[@]} -gt 0 ]; then
+		# Needs to look for files called
+		# .../.ssh2/key_22_<hostname>.pub
+		# dont fork any processes, because in a cluster environment, 
+		# there can be hundreds of hostkeys
+		for i in "${khd[@]}" ; do
+		    if [[ "$i" == *key_22_$curd*.pub ]] && [ -r "$i" ] ; then
+			host=${i/#*key_22_/}
+			host=${host/%.pub/}
+			COMPREPLY=( "${COMPREPLY[@]}" $host )
+		    fi
+		done
+	    fi
+
+	    # append any available aliases from config files
+	    if [ ${#config[@]} -gt 0 ] && [ -n "$aliases" ]; then
+		local host_aliases=$( sed -ne 's/^[Hh][Oo][Ss][Tt]\([Nn][Aa][Mm][Ee]\)\?['"$'\t '"']\+\([^*?]*\)$/\2/p' "${config[@]}" )
+		hosts=$( compgen -W "$host_aliases" -- $ocur )
+		COMPREPLY=( "${COMPREPLY[@]}" $hosts )
+	    fi
+
+	    # Now add results of normal hostname completion
+	    COMPREPLY=( "${COMPREPLY[@]}" $( compgen -A hostname -- $ocur ) )
+
+	    # apply suffix
+	    for (( i=0; i < ${#COMPREPLY[@]}; i++ )); do
+		COMPREPLY[i]=$user${COMPREPLY[i]}$suffix
+	    done
+	else
+	    # Just do normal hostname completion
+	    COMPREPLY=( $( compgen -A hostname -S "$suffix" -- $cur ) )
+	fi
+
+	return 0
+}
+complete -F _known_hosts traceroute traceroute6 tracepath tracepath6 \
+	ping ping6 fping fping6 telnet host nslookup rsh rlogin ftp dig ssh-installkeys mtr
+
+# ssh(1) completion
+#
+have ssh && {
+_ssh()
+{
+	local cur prev
+	local -a config
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+	-*c)
+	    COMPREPLY=( $( compgen -W 'blowfish 3des 3des-cbc blowfish-cbc \
+			   arcfour cast128-cbc' -- $cur ) )
+	    ;;
+	-*i)
+	    _filedir
+	    ;;
+	-*l)
+	    COMPREPLY=( $( compgen -u -- $cur ) )
+	    ;;
+	*)
+	    _known_hosts -a
+
+	    [ $COMP_CWORD -eq 1 ] || \
+		COMPREPLY=( "${COMPREPLY[@]}" $( compgen -c -- $cur ) )
+	esac
+
+	return 0
+}
+shopt -u hostcomplete && complete -F _ssh ssh slogin sftp xhost autossh
+
+# scp(1) completion
+#
+_scp()
+{
+	local cur userhost path
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	_expand || return 0
+
+	if [[ "$cur" == *:* ]]; then
+		local IFS=$'\t\n'
+		# remove backslash escape from :
+		cur=${cur/\\:/:}
+		userhost=${cur%%?(\\):*}
+		path=${cur#*:}
+		# unescape spaces
+		path=${path//\\\\\\\\ / }
+		if [ -z "$path" ]; then
+			# default to home dir of specified user on remote host
+			path=$(ssh -o 'Batchmode yes' $userhost pwd 2>/dev/null)
+		fi
+		# escape spaces; remove executables, aliases, pipes and sockets;
+		# add space at end of file names
+		COMPREPLY=( $( ssh -o 'Batchmode yes' $userhost \
+			       command ls -aF1d "$path*" 2>/dev/null | \
+			       sed -e "s/[][(){}<>\",:;^&!$&=?\`|\\ ']/\\\\\\\\\\\\&/g" \
+				   -e 's/[*@|=]$//g' -e 's/[^\/]$/& /g' ) )
+		return 0
+	fi
+
+	[[ "$cur" == */* ]] || _known_hosts -c -a
+		local IFS=$'\t\n'
+		COMPREPLY=( "${COMPREPLY[@]}" $( command ls -aF1d $cur* \
+			    2>/dev/null | sed \
+			    -e "s/[][(){}<>\",:;^&!$&=?\`|\\ ']/\\\\&/g" \
+			    -e 's/[*@|=]$//g' -e 's/[^\/]$/& /g' ) )
+	return 0
+}
+complete -F _scp $nospace scp
+}
+
+# rsync(1) completion
+#
+have rsync &&
+_rsync()
+{
+	local cur prev shell i userhost path
+ 
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	_expand || return 0
+
+	case "$prev" in
+	--@(config|password-file|include-from|exclude-from))
+		_filedir
+		return 0
+		;;
+	-@(T|-temp-dir|-compare-dest))
+		_filedir -d
+		return 0
+		;;
+	-@(e|-rsh))
+		COMPREPLY=( $( compgen -W 'rsh ssh' -- $cur ) )
+		return 0
+		;;
+	esac
+ 
+	case "$cur" in
+	-*)
+		COMPREPLY=( $( compgen -W '-v -q  -c -a -r -R -b -u -l -L -H \
+				-p -o -g -D -t -S -n -W -x -B -e -C -I -T -P \
+				-z -h -4 -6 --verbose --quiet --checksum \
+				--archive --recursive --relative --backup \
+				--backup-dir --suffix= --update --links \
+				--copy-links --copy-unsafe-links --safe-links \
+				--hard-links --perms --owner --group --devices\
+				--times --sparse --dry-run --whole-file \
+				--no-whole-file --one-file-system \
+				--block-size= --rsh= --rsync-path= \
+				--cvs-exclude --existing --ignore-existing \
+				--delete --delete-excluded --delete-after \
+				--ignore-errors --max-delete= --partial \
+				--force --numeric-ids --timeout= \
+				--ignore-times --size-only --modify-window= \
+				--temp-dir= --compare-dest= --compress \
+				--exclude= --exclude-from= --include= \
+				--include-from= --version --daemon --no-detach\
+				--address= --config= --port= --blocking-io \
+				--no-blocking-io --stats --progress \
+				--log-format= --password-file= --bwlimit= \
+				--write-batch= --read-batch= --help' -- $cur ))
+		;;
+	*:*)
+		# find which remote shell is used
+		shell=rsh
+		for (( i=1; i < COMP_CWORD; i++ )); do
+			if [[ "${COMP_WORDS[i]}" == -@(e|-rsh) ]]; then
+				shell=${COMP_WORDS[i+1]}
+				break
+			fi
+		done
+		if [[ "$shell" == ssh ]]; then
+			# remove backslash escape from :
+			cur=${cur/\\:/:}
+			userhost=${cur%%?(\\):*}
+			path=${cur#*:}
+			# unescape spaces
+			path=${path//\\\\\\\\ / }
+			if [ -z "$path" ]; then
+				# default to home dir of specified
+				# user on remote host
+				path=$(ssh -o 'Batchmode yes' \
+					$userhost pwd 2>/dev/null)
+			fi
+			# escape spaces; remove executables, aliases, pipes
+			# and sockets; add space at end of file names
+			COMPREPLY=( $( ssh -o 'Batchmode yes' $userhost \
+				command ls -aF1d "$path*" 2>/dev/null | \
+				sed -e 's/ /\\\\\\\ /g' -e 's/[*@|=]$//g' \
+				-e 's/[^\/]$/& /g' ) )
+		fi
+		;;
+	*)
+		_known_hosts -c -a
+		_filedir
+		;;
+	esac
+ 
+	return 0
+} &&
+complete -F _rsync $nospace $filenames rsync
+
+# Linux route(8) completion
+#
+[ $UNAME = Linux ] &&
+_route()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	if [ "$prev" = dev ]; then
+	    COMPREPLY=( $( ifconfig -a | sed -ne 's|^\('$cur'[^ ]*\).*$|\1|p' ))
+	    return 0
+	fi
+
+	COMPREPLY=( $( compgen -W 'add del -host -net netmask metric mss \
+				   window irtt reject mod dyn reinstate dev \
+				   default gw' -- $cur ) )
+
+	COMPREPLY=( $( echo " ${COMP_WORDS[@]}" | \
+		       (while read -d ' ' i; do
+			   [ "$i" == "" ] && continue
+			   # flatten array with spaces on either side,
+			   # otherwise we cannot grep on word
+			   # boundaries of first and last word
+			   COMPREPLY=" ${COMPREPLY[@]} "
+			   # remove word from list of completions
+			   COMPREPLY=( ${COMPREPLY/ $i / } )
+			done
+		       echo "${COMPREPLY[@]}")
+		  ) )
+	return 0
+}
+[ $UNAME = Linux ] && complete -F _route route
+
+# GNU make(1) completion
+#
+have make || have gmake || have gnumake || have pmake &&
+_make()
+{
+	local file makef makef_dir="." makef_inc cur prev i
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	# --name value style option
+	case $prev in
+		-@(f|o|W))
+			_filedir
+			return 0
+			;;
+		-@(I|C))
+			_filedir -d
+			return 0
+			;;
+	esac
+
+	# --name=value style option
+	if [[ "$cur" == *=* ]]; then
+		prev=${cur/=*/}
+		cur=${cur/*=/}
+		case "$prev" in
+			--@(file|makefile))
+				_filedir
+				return 0
+				;;
+			--@(directory|include-dir))
+				_filedir -d
+				return 0
+				;;
+		esac
+	fi
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-b -m -B -C -d -e -f -h -i -I\
+			-j -l -k -n -o -p -q -r -R - s -S -t -v -w -W \
+			--always-make --directory= --debug \
+			--environment-overrides --file= --makefile= --help \
+			--ignore-errors --include-dir= --jobs --load-average \
+			--max-load --keep-going --just-print --dry-run \
+			--recon --old-file= --assume-old= --print-data-base \
+			--question --no-builtin-rules --no-builtin-variables \
+			--silent --quiet --no-keep-goind --stop --touch \
+			--version --print-directory --no-print-directory \
+			--what-if= --new-file= --assume-new= \
+			--warn-undefined-variables' -- $cur ) )
+	else
+		# before we check for makefiles, see if a path was specified
+		# with -C
+		for (( i=0; i < ${#COMP_WORDS[@]}; i++ )); do
+			if [[ ${COMP_WORDS[i]} == -C ]]; then
+				# eval for tilde expansion
+				eval makef_dir=${COMP_WORDS[i+1]}
+				break
+			fi
+		done
+
+		# make reads `GNUmakefile', then `makefile', then `Makefile'
+		if [ -f ${makef_dir}/GNUmakefile ]; then
+			makef=${makef_dir}/GNUmakefile
+		elif [ -f ${makef_dir}/makefile ]; then
+			makef=${makef_dir}/makefile
+		elif [ -f ${makef_dir}/Makefile ]; then
+			makef=${makef_dir}/Makefile
+		else
+			makef=${makef_dir}/*.mk	       # local convention
+		fi
+
+		# before we scan for targets, see if a Makefile name was
+		# specified with -f
+		for (( i=0; i < ${#COMP_WORDS[@]}; i++ )); do
+			if [[ ${COMP_WORDS[i]} == -f ]]; then
+				# eval for tilde expansion
+				eval makef=${COMP_WORDS[i+1]}
+				break
+			fi
+		done
+
+		[ ! -f $makef ] && return 0
+
+		# deal with included Makefiles
+ 		makef_inc=$( grep -E '^-?include' $makef | sed -e "s,^.* ,"$makef_dir"/," )
+
+ 		for file in $makef_inc; do
+ 			[ -f $file ] && makef="$makef $file"
+ 		done
+
+		COMPREPLY=( $( awk -F':' '/^[a-zA-Z0-9][^$#\/\t=]*:([^=]|$)/ \
+				{split($1,A,/ /);for(i in A)print A[i]}' \
+				$makef 2>/dev/null | command grep "^$cur" ))
+	fi
+} &&
+complete -f -F _make $filenames make gmake gnumake pmake
+
+# GNU tar(1) completion
+#
+_tar()
+{
+	local cur ext regex tar untar
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	if [ $COMP_CWORD -eq 1 ]; then
+		COMPREPLY=( $( compgen -W 'c t x u r d A' -- $cur ) )
+		return 0
+	fi
+
+	case "${COMP_WORDS[1]}" in
+	?(-)[cr]*f)
+		_filedir
+		return 0
+		;;
+	+([^IZzjy])f)
+		ext='t@(ar?(.@(Z|gz|bz?(2)))|gz|bz?(2))'
+		regex='t\(ar\(\.\(Z\|gz\|bz2\?\)\)\?\|gz\|bz2\?\)'
+		;;
+	*[Zz]*f)
+		ext='t?(ar.)@(gz|Z)'
+		regex='t\(ar\.\)\?\(gz\|Z\)'
+		;;
+	*[Ijy]*f)
+		ext='t?(ar.)bz?(2)'
+		regex='t\(ar\.\)\?bz2\?'
+		;;
+	*)
+		_filedir
+		return 0
+		;;
+		
+	esac
+
+	if [[ "$COMP_LINE" == *$ext' ' ]]; then
+		# complete on files in tar file
+		#
+		# get name of tar file from command line
+		tar=$( echo "$COMP_LINE" | \
+			sed -e 's/^.* \([^ ]*'$regex'\) .*$/\1/' )
+		# devise how to untar and list it
+		untar=t${COMP_WORDS[1]//[^Izjyf]/}
+
+		COMPREPLY=( $( compgen -W "$( echo $( tar $untar $tar \
+				2>/dev/null ) )" -- "$cur" ) )
+		return 0
+	fi
+
+	# file completion on relevant files
+	_filedir "$ext"
+
+	return 0
+}
+[ -n "${COMP_TAR_INTERNAL_PATHS:-}" ] && complete -F _tar $dirnames tar ||
+	complete -F _tar $filenames tar
+
+# jar(1) completion
+#
+have jar &&
+_jar()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	if [ $COMP_CWORD = 1 ]; then
+		COMPREPLY=( $( compgen -W 'c t x u' -- $cur ) )
+		return 0
+	fi
+
+	case "${COMP_WORDS[1]}" in
+		*c*f)
+			_filedir
+			;;
+		*f)
+			_filedir '?(e|j|w)ar'
+			;;
+		*)
+			_filedir
+			;;
+	esac
+} &&
+complete -F _jar $filenames jar
+
+# Linux iptables(8) completion
+#
+have iptables &&
+_iptables()
+{
+	local cur prev table chain
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+	chain='s/^Chain \([^ ]\+\).*$/\1/p'
+
+	if [[ $COMP_LINE == *-t\ *filter* ]]; then
+		table="-t filter"
+	elif [[ $COMP_LINE == *-t\ *nat* ]]; then
+		table="-t nat"
+	elif [[ $COMP_LINE == *-t\ *mangle* ]]; then
+		table="-t mangle"
+	fi
+
+	case "$prev" in
+	-*[AIDRPFXLZ])
+		COMPREPLY=( $( compgen -W '`iptables $table -nL | \
+			    sed -ne "s/^Chain \([^ ]\+\).*$/\1/p"`' -- $cur ) )
+		;;
+	-*t)
+		COMPREPLY=( $( compgen -W 'nat filter mangle' -- $cur ) )
+		;;
+	-j)
+		if [ "$table" = "-t filter" -o "$table" = "" ]; then
+		    COMPREPLY=( $( compgen -W 'ACCEPT DROP LOG ULOG REJECT \
+		    `iptables $table -nL | sed -ne "$chain" \
+		    -e "s/INPUT|OUTPUT|FORWARD|PREROUTING|POSTROUTING//"`' -- \
+		    $cur ) )
+		elif [ "$table" = "-t nat" ]; then
+		    COMPREPLY=( $( compgen -W 'ACCEPT DROP LOG ULOG REJECT \
+		    MIRROR SNAT DNAT MASQUERADE `iptables $table -nL | \
+		    sed -ne "$chain" -e "s/OUTPUT|PREROUTING|POSTROUTING//"`' \
+		    -- $cur ) )
+		elif [ "$table" = "-t mangle" ]; then
+		    COMPREPLY=( $( compgen -W 'ACCEPT DROP LOG ULOG REJECT \
+		    MARK TOS `iptables $table -nL | sed -ne "$chain" \
+		    -e "s/INPUT|OUTPUT|FORWARD|PREROUTING|POSTROUTING//"`' -- \
+		    $cur ) )
+		fi
+		;;
+	*)
+		if [[ "$cur" == -* ]]; then
+		    COMPREPLY=( $( compgen -W '-i -o -s -d -p -f -m --append \
+		    --delete --insert --replace --list --flush --zero --new \
+		    --delete-chain --policy --rename-chain --proto --source \
+		    --destination --in-interface --jump --match --numeric \
+		    --out-interface --table --verbose --line-numbers --exact \
+		    --fragment --modprobe= --set-counters --version' -- "$cur") )
+		fi
+		;;
+	esac
+
+} &&
+complete -F _iptables iptables
+
+# tcpdump(8) completion
+#
+have tcpdump &&
+_tcpdump()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-@(r|w|F))
+			_filedir
+			return 0
+			;;
+		-i)
+			_available_interfaces -a
+			return 0
+			;;
+	esac
+
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-a -d -e -f -l -n -N -O -p \
+			-q -R -S -t -u -v -x -C -F -i -m -r -s -T -w \
+			-E' -- $cur ) )
+	fi
+
+} &&
+complete -F _tcpdump tcpdump
+
+# autorpm(8) completion
+#
+have autorpm &&
+_autorpm()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	COMPREPLY=( $( compgen -W '--notty --debug --help --version \
+				   auto add fullinfo info help install list \
+				   remove set' -- $cur ) )
+
+} &&
+complete -F _autorpm autorpm
+
+# This meta-cd function observes the CDPATH variable, so that cd additionally
+# completes on directories under those specified in CDPATH.
+#
+_cd()
+{
+	local IFS=$'\t\n' cur=`_get_cword` i j k
+
+	# try to allow variable completion
+	if [[ "$cur" == ?(\\)\$* ]]; then
+		COMPREPLY=( $( compgen -v -P '$' -- "${cur#?(\\)$}" ) )
+		return 0
+	fi
+
+	# Use standard dir completion if no CDPATH or parameter starts with /,
+	# ./ or ../
+	if [ -z "${CDPATH:-}" ] || [[ "$cur" == ?(.)?(.)/* ]]; then
+		_filedir -d
+		return 0
+	fi
+
+	local -r mark_dirs=$(_rl_enabled mark-directories && echo y)
+	local -r mark_symdirs=$(_rl_enabled mark-symlinked-directories && echo y)
+
+	# we have a CDPATH, so loop on its contents
+	for i in ${CDPATH//:/$'\t'}; do
+		# create an array of matched subdirs
+		k="${#COMPREPLY[@]}"
+		for j in $( compgen -d $i/$cur ); do
+			if [[ ( $mark_symdirs && -h $j || $mark_dirs && ! -h $j ) && ! -d ${j#$i/} ]]; then
+				j="${j}/"
+			fi
+			COMPREPLY[k++]=${j#$i/}
+		done
+	done
+
+	_filedir -d
+
+	if [[ ${#COMPREPLY[@]} -eq 1 ]]; then
+	    i=${COMPREPLY[0]}
+	    if [ "$i" == "$cur" ] && [[ $i != "*/" ]]; then
+		COMPREPLY[0]="${i}/"
+	    fi
+	fi
+	    
+	return 0
+}
+if shopt -q cdable_vars; then
+    complete -v -F _cd $nospace $filenames cd
+else
+    complete -F _cd $nospace $filenames cd
+fi
+
+_remove_comp_word()
+{
+	if [[ COMP_CWORD -eq 0 ]]; then
+		return
+	elif [[ ${#COMP_WORDS[@]} -ge 2 ]]; then
+		local old_cw0="${COMP_WORDS[0]}"
+		local new_cw0="${COMP_WORDS[1]}"
+		local old_length="${#COMP_LINE}"
+		COMP_LINE=${COMP_LINE#${old_cw0}}
+		local head=${COMP_LINE:0:${#new_cw0}}
+		local i=1
+		while [[ $head != $new_cw0 ]]; do
+			COMP_LINE=${COMP_LINE:1}
+			head=${COMP_LINE:0:${#new_cw0}}
+			if (( ++i > 10 )); then
+				break
+			fi
+		done
+		local new_length="${#COMP_LINE}"
+		COMP_POINT=$(( COMP_POINT + new_length - old_length))
+
+		COMP_CWORD=$(( COMP_CWORD - 1 ))
+		for (( i=0; i < ${#COMP_WORDS[@]} - 1; ++i )); do
+			COMP_WORDS[i]="${COMP_WORDS[i+1]}"
+		done
+		unset COMP_WORDS[${#COMP_WORDS[@]}-1]
+	else
+		return
+	fi
+}
+
+# A meta-command completion function for commands like sudo(8), which need to
+# first complete on a command, then complete according to that command's own
+# completion definition - currently not quite foolproof (e.g. mount and umount
+# don't work properly), but still quite useful.
+#
+_command()
+{
+	local cur func cline cspec noglob cmd done i \
+	      _COMMAND_FUNC _COMMAND_FUNC_ARGS
+
+	_remove_comp_word
+	COMPREPLY=()
+	cur=`_get_cword`
+	# If the the first arguments following our meta-command-invoker are
+	# switches, get rid of them. Most definitely not foolproof.
+	done=
+	while [ -z $done ] ; do
+	    cmd=${COMP_WORDS[0]}
+	    if [[ "$cmd" == -* ]] && [ $COMP_CWORD -ge 1 ]; then
+	        _remove_comp_word
+	    elif [[ "$cmd" == -* ]] && [[ $COMP_CWORD -eq 0 ]]; then
+		return
+	    else 
+		done=1
+	    fi
+	done
+
+	if [ $COMP_CWORD -eq 0 ]; then
+		COMPREPLY=( $( compgen -c -- $cur ) )
+	elif complete -p $cmd &>/dev/null; then
+		cspec=$( complete -p $cmd )
+		if [ "${cspec#* -F }" != "$cspec" ]; then
+			# COMP_CWORD and COMP_WORDS() are not read-only,
+			# so we can set them before handing off to regular
+			# completion routine
+
+			# get function name
+			func=${cspec#*-F }
+			func=${func%% *}
+
+			if [[ ${#COMP_WORDS[@]} -ge 2 ]]; then
+				$func $cmd "${COMP_WORDS[${#COMP_WORDS[@]}-1]}" "${COMP_WORDS[${#COMP_WORDS[@]}-2]}"
+			else
+				$func $cmd "${COMP_WORDS[${#COMP_WORDS[@]}-1]}"
+			fi
+
+			# remove any \: generated by a command that doesn't
+			# default to filenames or dirnames (e.g. sudo chown)
+			# FIXME: I'm pretty sure this does not work!
+			if [ "${cspec#*-o }" != "$cspec" ]; then
+				cspec=${cspec#*-o }
+				cspec=${cspec%% *}
+				if [[ "$cspec" != @(dir|file)names ]]; then
+					COMPREPLY=("${COMPREPLY[@]//\\\\:/:}")
+				fi
+			fi
+		elif [ -n "$cspec" ]; then
+			cspec=${cspec#complete};
+			cspec=${cspec%%$cmd};
+			COMPREPLY=( $( eval compgen "$cspec" -- "$cur" ) );
+		fi
+	fi
+
+	[ ${#COMPREPLY[@]} -eq 0 ] && _filedir
+}
+complete -F _command $filenames nohup exec nice eval strace time ltrace then \
+	else do vsound command xargs
+
+_root_command()
+{
+	PATH=$PATH:/sbin:/usr/sbin:/usr/local/sbin _command $1 $2 $3
+}
+complete -F _root_command $filenames sudo fakeroot really
+
+# ant(1) completion
+#
+have ant && {
+_ant()
+{
+	local cur prev buildfile i
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-buildfile|-f)
+			_filedir 'xml'
+			return 0
+			;;
+		-logfile)
+			_filedir
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		# relevant options completion
+		COMPREPLY=( $( compgen -W '-help -projecthelp -version -quiet \
+			       -verbose -debug -emacs -logfile -logger \
+			       -listener -buildfile -f -D -find' -- $cur ) )
+	else
+		# available targets completion
+		# find which buildfile to use
+		buildfile=build.xml
+		for (( i=1; i < COMP_CWORD; i++ )); do
+			if [[ "${COMP_WORDS[i]}" == -buildfile ]]; then
+				buildfile=${COMP_WORDS[i+1]}
+				break
+			fi
+		done
+		[ ! -f $buildfile ] && return 0
+
+		# parse buildfile for targets
+		COMPREPLY=( $( awk -F'"' '/<target name="/ {print $2}' \
+				$buildfile | grep "^$cur" )
+			    $( awk -F"'" "/<target name='/ "'{print $2}' \
+				$buildfile | grep "^$cur" )
+			    $( awk -F'"' '/<target [^n]/ {if ($1 ~ /name=/) { print $2 } else if ($3 ~ /name=/) {print $4} else if ($5 ~ /name=/) {print $6}}' \
+				$buildfile | grep "^$cur" ) )
+	fi
+}
+have complete-ant-cmd.pl && \
+     complete -C complete-ant-cmd.pl -F _ant $filenames ant || \
+     complete -F _ant $filenames ant
+}
+
+have nslookup &&
+_nslookup()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=${COMP_WORDS[COMP_CWORD]#-}
+
+	COMPREPLY=( $( compgen -P '-' -W 'all class= debug d2 domain= \
+			       srchlist= defname search port= querytype= \
+			       type= recurse retry root timeout vc \
+			       ignoretc' -- $cur ) )
+} &&
+complete -F _nslookup nslookup
+
+# mysqladmin(1) completion
+#
+have mysqladmin &&
+_mysqladmin()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+	-u)
+		COMPREPLY=( $( compgen -u -- $cur ) )
+		return 0
+		;;
+	*)
+		;;
+	esac
+
+	COMPREPLY=( $( compgen -W '-# -f -? -C -h -p -P -i -r -E -s -S -t -u \
+					      -v -V -w' -- $cur ) )
+
+	COMPREPLY=( "${COMPREPLY[@]}" \
+		    $( compgen -W 'create drop extended-status flush-hosts \
+				   flush-logs flush-status flush-tables \
+				   flush-threads flush-privileges kill \
+				   password ping processlist reload refresh \
+				   shutdown status variables version' \
+		       -- $cur ) )
+} &&
+complete -F _mysqladmin mysqladmin
+
+# gzip(1) completion
+#
+have gzip &&
+_gzip()
+{
+	local cur prev xspec IFS=$'\t\n'
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-c -d -f \
+			-h -l -L -n -N -q -r -S -t -v -V \
+			-1 -2 -3 -4 -5 -6 -7 -8 -9 \
+			--stdout --decompress --force --help --list \
+			--license --no-name --name --quiet --recursive \
+			--suffix --test --verbose --version --fast \
+			--best' -- $cur ) )
+		return 0
+	fi
+
+	xspec="*.?(t)gz"
+	if [[ "$prev" == --* ]]; then
+		[[ "$prev" == --decompress || \
+			"$prev" == --list || \
+			"$prev" == --test ]] && xspec="!"$xspec
+		[[ "$prev" == --force ]] && xspec=
+	elif [[ "$prev" == -* ]]; then
+		[[ "$prev" == -*[dlt]* ]] && xspec="!"$xspec
+		[[ "$prev" == -*f* ]] && xspec=
+	elif [ "$prev" = '>' ]; then
+		xspec=
+	elif [ "$prev" = '<' ]; then
+		xspec=
+	fi
+
+	_expand || return 0
+
+	COMPREPLY=( $( compgen -f -X "$xspec" -- $cur ) \
+		    $( compgen -d -- $cur ) )
+} &&
+complete -F _gzip $filenames gzip
+
+# bzip2(1) completion
+#
+have bzip2 &&
+_bzip2()
+{
+	local cur prev xspec IFS=$'\t\n'
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-c -d -f -h -k -L -q -s \
+			-t -v -V -z -1 -2 -3 -4 -5 -6 -7 -8 -9 \
+			--help --decompress --compress --keep --force \
+			--test --stdout --quiet --verbose --license \
+			--version --small --fast --best' -- $cur ) )
+		return 0
+	fi
+
+	xspec="*.bz2"
+	if [[ "$prev" == --* ]]; then
+		[[ "$prev" == --decompress || \
+			"$prev" == --list || \
+			"$prev" == --test ]] && xspec="!"$xspec
+		[[ "$prev" == --compress ]] && xspec=
+	elif [[ "$prev" == -* ]]; then
+		[[ "$prev" == -*[dt]* ]] && xspec="!"$xspec
+		[[ "$prev" == -*z* ]] && xspec=
+	fi
+
+	_expand || return 0
+
+	COMPREPLY=( $( compgen -f -X "$xspec" -- $cur ) \
+		    $( compgen -d -- $cur ) )
+} &&
+complete -F _bzip2 $filenames bzip2
+
+# openssl(1) completion
+#
+have openssl && {
+_openssl_sections()
+{
+	local config
+
+	config=/etc/ssl/openssl.cnf
+	[ ! -f $config ] && config=/usr/share/ssl/openssl.cnf
+	for (( i=2; i < COMP_CWORD; i++ )); do
+		if [[ "${COMP_WORDS[i]}" == -config ]]; then
+			config=${COMP_WORDS[i+1]}
+			break
+		fi
+	done
+	[ ! -f $config ] && return 0
+
+	COMPREPLY=( $( awk '/\[.*\]/ {print $2} ' $config | grep "^$cur" ) )
+}
+
+_openssl()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	if [ $COMP_CWORD -eq 1 ]; then
+		COMPREPLY=( $( compgen -W 'asn1parse ca ciphers crl crl2pkcs7 \
+			dgst dh dhparam dsa dsaparam enc errstr gendh gendsa \
+			genrsa nseq passwd pkcs12 pkcs7 pkcs8 rand req rsa \
+			rsautl s_client s_server s_time sess_id smime speed \
+			spkac verify version x509 md2 md4 md5 mdc2 rmd160 sha \
+			sha1 base64 bf bf-cbc bf-cfb bf-ecb bf-ofb cast \
+			cast-cbc cast5-cbc cast5-cfb cast5-ecb cast5-ofb des \
+			des-cbc des-cfb des-ecb des-ede des-ede-cbc \
+			des-ede-cfb des-ede-ofb des-ede3 des-ede3-cbc \
+			des-ede3-cfb des-ede3-ofb des-ofb des3 desx rc2 \
+			rc2-40-cbc rc2-64-cbc rc2-cbc rc2-cfb rc2-ecb rc2-ofb \
+			rc4 rc4-40' -- $cur ) )
+	else
+		prev=${COMP_WORDS[COMP_CWORD-1]}
+		case ${COMP_WORDS[1]} in
+			asn1parse)
+				case $prev in
+					-inform)
+						COMPREPLY=( $( compgen -W 'DER PEM' -- $cur ) )
+						return 0
+						;;
+					-@(in|out|oid))
+						_filedir
+						return 0
+						;;
+					esac
+
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-inform -in -out -noout -offset \
+						-length -i -oid -strparse' -- $cur ) )
+				fi
+				;;
+			ca)
+				case $prev in
+					-@(config|revoke|cert|in|out|spkac|ss_cert))
+						_filedir
+						return 0
+						;;
+					-outdir)
+						_filedir -d
+						return 0
+						;;
+					-@(name|crlexts|extensions))
+						_openssl_sections
+						return 0
+						;;
+				esac
+
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-verbose -config -name \
+						-gencrl -revoke -crldays -crlhours -crlexts \
+						-startdate -enddate -days -md -policy -keyfile \
+						-key -passin -cert -in -out -notext -outdir \
+						-infiles -spkac -ss_cert -preserveDN -batch \
+						-msie_hack -extensions' -- $cur ) )
+				fi
+				;;
+			ciphers)
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-v -ssl2 -ssl3 -tls1' -- $cur ) )
+				fi
+				;;
+			crl)
+				case $prev in
+					-@(in|out)form)
+						COMPREPLY=( $( compgen -W 'DER PEM' -- $cur ) )
+						return 0
+						;;
+					-@(in|out|CAfile))
+						_filedir
+						return 0
+						;;
+					-CAPath)
+						_filedir -d
+						return 0
+						;;
+				esac
+
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-inform -outform -text -in -out -noout \
+						-hash -issuer -lastupdate -nextupdate -CAfile -CApath' -- $cur ) )
+				fi
+				;;
+			crl2pkcs7)
+				case $prev in
+					-@(in|out)form)
+						COMPREPLY=( $( compgen -W 'DER PEM' -- $cur ) )
+						return 0
+						;;
+					-@(in|out))
+						_filedir
+						return 0
+						;;
+				esac
+
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-inform -outform -in -out -print_certs' -- $cur ) )
+				fi
+				;;
+			dgst)
+				case $prev in
+					-@(out|sign|verify|prvrify|signature))
+						_filedir
+						return 0
+						;;
+				esac
+
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-md5 -md4 -md2 -sha1 -sha -mdc2 -ripemd160 -dss1 \
+						-c -d -hex -binary -out -sign -verify -prverify -signature' -- $cur ) )
+				else
+						_filedir
+				fi
+			       ;;
+			dsa)
+				case $prev in
+					-@(in|out)form)
+						COMPREPLY=( $( compgen -W 'DER PEM' -- $cur ) )
+						return 0
+						;;
+					-@(in|out))
+						_filedir
+						return 0
+						;;
+				esac
+
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-inform -outform -in -passin -out -passout -des -des3 -idea -text -noout \
+						-modulus -pubin -pubout' -- $cur ) )
+				fi
+				;;
+			dsaparam)
+				case $prev in
+					-@(in|out)form)
+						COMPREPLY=( $( compgen -W 'DER PEM' -- $cur ) )
+						return 0
+						;;
+					-@(in|out|rand))
+						_filedir
+						return 0
+						;;
+				esac
+
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-inform -outform -in -out -noout \
+						-text -C -rand -genkey' -- $cur ) )
+				fi
+				;;
+			enc)
+				case $prev in
+					-@(in|out|kfile))
+						_filedir
+						return 0
+						;;
+				esac
+
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-ciphername -in -out -pass \
+						-e -d -a -A -k -kfile -S -K -iv -p -P -bufsize -debug' -- $cur ) )
+				fi
+				;;
+			dhparam)
+				case $prev in
+					-@(in|out)form)
+						COMPREPLY=( $( compgen -W 'DER PEM' -- $cur ) )
+						return 0
+						;;
+					-@(in|out|rand))
+						_filedir
+						return 0
+						;;
+				esac
+
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-inform -outform -in -out -dsaparam -noout \
+						-text -C -2 -5 -rand' -- $cur ) )
+				fi
+				;;
+			gendsa)
+				case $prev in
+					-@(out|rand))
+						_filedir
+						return 0
+						;;
+				esac
+
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-out -des -des3 -idea -rand' -- $cur ) )
+				else
+						_filedir
+				fi
+				;;
+			genrsa)
+				case $prev in
+					-@(out|rand))
+						_filedir
+						return 0
+						;;
+				esac
+
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-out -passout -des -des3 -idea -f4 -3 -rand' -- $cur ) )
+				fi
+				;;
+			pkcs7)
+				case $prev in
+					-@(in|out)form)
+						COMPREPLY=( $( compgen -W 'DER PEM' -- $cur ) )
+						return 0
+						;;
+					-@(in|out))
+						_filedir
+						return 0
+						;;
+				esac
+
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-inform -outform -in -out -print_certs -text -noout' -- $cur ) )
+				fi
+				;;
+			rand)
+				case $prev in
+					-@(out|rand))
+						_filedir
+						return 0
+						;;
+				esac
+
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-out -rand -base64' -- $cur ) )
+				fi
+				;;
+			req)
+				case "$prev" in
+					-@(in|out|key)form)
+						COMPREPLY=( $( compgen -W 'DER PEM' -- $cur ) )
+						return 0
+						;;
+
+					-@(in|out|rand|key|keyout|config))
+						_filedir
+						return 0
+						;;
+					-extensions)
+						_openssl_sections
+						return 0
+						;;
+				esac
+
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-inform -outform -in \
+						-passin -out -passout -text -noout -verify \
+						-modulus -new -rand -newkey -newkey -nodes \
+						-key -keyform -keyout -md5 -sha1 -md2 -mdc2 \
+						-config -x509 -days -asn1-kludge -newhdr \
+						-extensions -reqexts section' -- $cur ) )
+				fi
+				;;
+			rsa)
+				case $prev in
+					-@(in|out)form)
+						COMPREPLY=( $( compgen -W 'DER NET PEM' -- $cur ) )
+						return 0
+						;;
+					-@(in|out))
+						_filedir
+						return 0
+						;;
+				esac
+
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-inform -outform -in -passin -out -passout \
+						-sgckey -des -des3 -idea -text -noout -modulus -check -pubin \
+						-pubout -engine' -- $cur ) )
+				fi
+				;;
+			rsautl)
+				case $prev in
+					-@(in|out|inkey))
+						_filedir
+						return 0
+						;;
+				esac
+
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-in -out -inkey -pubin -certin -sign -verify \
+						-encrypt -decrypt -pkcs -ssl -raw -hexdump -asn1parse' -- $cur ) )
+				fi
+				;;
+			s_client)
+				case $prev in
+					-connect)
+						_known_hosts
+						return 0
+						;;
+					-@(cert|key|CAfile|rand))
+						_filedir
+						return 0
+						;;
+					-CApath)
+						_filedir -d
+						return 0
+						;;
+				esac
+
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-connect -verify -cert -key -CApath -CAfile \
+						-reconnect -pause -showcerts -debug -msg -nbio_test -state -nbio \
+						-crlf -ign_eof -quiet -ssl2 -ssl3 -tls1 -no_ssl2 -no_ssl3 -no_tls1 \
+						-bugs -cipher -starttls -engine -rand' -- $cur ) )
+				fi
+				;;
+			s_server)
+				case $prev in
+					-@(cert|key|dcert|dkey|dhparam|CAfile|rand))
+						_filedir
+						return 0
+						;;
+					-CApath)
+						_filedir -d
+						return 0
+						;;
+				esac
+
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-accept -context -verify -Verify -cert -key \
+						 -dcert -dkey -dhparam -nbio -nbio_test -crlf -debug -msg -state -CApath \
+						 -CAfile -nocert -cipher -quiet -no_tmp_rsa -ssl2 -ssl3 -tls1 -no_ssl2 \
+						 -no_ssl3 -no_tls1 -no_dhe -bugs -hack -www -WWW -HTTP -engine -id_prefix \
+						 -rand' -- $cur ) )
+				 fi
+				 ;;
+			s_time)
+				case $prev in
+					-connect)
+						_known_hosts
+						return 0
+						;;
+					-@(cert|key|CAfile))
+						_filedir
+						return 0
+						;;
+					-CApath)
+						_filedir -d
+						return 0
+						;;
+				esac
+
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-connect -www -cert -key -CApath -CAfile -reuse \
+						-new -verify -nbio -time -ssl2 -ssl3 -bugs -cipher' -- $cur ) )
+				fi
+				;;
+
+			sess_id) 
+				case $prev in
+					-@(in|out)form)
+						COMPREPLY=( $( compgen -W 'DER PEM' -- $cur ) )
+						return 0
+						;;
+					-@(in|out))
+						_filedir
+						return 0
+						;;
+				esac
+
+
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-inform -outform -in -out -text -noout \
+						-context ID' -- $cur ) )
+				fi
+				;;
+			smime)
+				case $prev in
+					-@(in|out)form)
+						COMPREPLY=( $( compgen -W 'SMIME DER PEM' -- $cur ) )
+						return 0
+						;;
+					-@(in|out|certfile|signer|recip|inkey|content|rand))
+						_filedir
+						return 0
+						;;
+				esac
+
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-encrypt -decrypt -sign -verify -pk7out -des -des3 \
+						-rc2-40 -rc2-64 -rc2-128 -aes128 -aes192 -aes256 -in -certfile -signer \
+						-recip -inform -passin -inkey -out -outform -content -to -from -subject \
+						-text -rand' -- $cur ) )
+				else
+						_filedir
+				fi
+				;;
+			speed)
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-engine' -- $cur ) )
+				else
+					COMPREPLY=( $( compgen -W 'md2 mdc2 md5 hmac sha1 rmd160 idea-cbc \
+						rc2-cbc rc5-cbc bf-cbc des-cbc des-ede3 rc4 rsa512 rsa1024 rsa2048 \
+						rsa4096 dsa512 dsa1024 dsa2048 idea rc2 des rsa blowfish' -- $cur ) )
+				fi
+				;;
+			verify)
+				case $prev in
+					-@(CAfile|untrusted))
+						_filedir
+						return 0
+						;;
+					-CApath)
+						_filedir -d
+						return 0
+						;;
+				esac
+
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-CApath -CAfile -purpose -untrusted -help -issuer_checks \
+						-verbose -certificates' -- $cur ) )
+				else
+						_filedir
+				fi
+				;;
+			x509)
+				case "$prev" in
+					-@(in|out|CA|CAkey|CAserial|extfile))
+						_filedir
+						return 0
+						;;
+					-@(in|out)form)
+						COMPREPLY=( $( compgen -W 'DER PEM NET' -- $cur ) )
+						return 0
+						;;
+					-@(key|CA|CAkey)form)
+						COMPREPLY=( $( compgen -W 'DER PEM' -- $cur ) )
+						return 0
+						;;
+					-extensions)
+						_openssl_sections
+						return 0
+						;;
+				esac
+
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-inform -outform \
+						-keyform -CAform -CAkeyform -in -out \
+						-serial -hash -subject -issuer -nameopt \
+						-email -startdate -enddate -purpose \
+						-dates -modulus -fingerprint -alias \
+						-noout -trustout -clrtrust -clrreject \
+						-addtrust -addreject -setalias -days \
+						-set_serial -signkey -x509toreq -req \
+						-CA -CAkey -CAcreateserial -CAserial \
+						-text -C -md2 -md5 -sha1 -mdc2 -clrext \
+						-extfile -extensions -engine' -- $cur ) )
+				fi
+				;;
+			@(md5|md4|md2|sha1|sha|mdc2|ripemd160))
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-c -d' -- $cur ) )
+				else
+						_filedir
+				fi
+				;;
+		esac
+	fi
+
+	return 0
+}
+complete -F _openssl $default openssl
+}
+
+# screen(1) completion
+#
+have screen &&
+_screen()
+{
+	local cur prev preprev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	[ "$COMP_CWORD" -ge 2 ] && preprev=${COMP_WORDS[COMP_CWORD-2]}
+
+	if [ "$preprev" = "-d" -o "$preprev" = "-D" -a "$prev" = "-r" -o \
+	     "$prev" = "-R" ]; then
+		# list all
+		COMPREPLY=( $( command screen -ls | \
+				sed -ne 's|^['$'\t'']\+\('$cur'[0-9]\+\.[^'$'\t'']\+\).*$|\1|p' ) )
+	else
+		case "$prev" in
+		-[rR])
+			# list detached
+			COMPREPLY=( $( command screen -ls | \
+					sed -ne 's|^['$'\t'']\+\('$cur'[0-9]\+\.[^'$'\t'']\+\).*Detached.*$|\1|p' ) )
+			;;
+		-[dDx])
+			# list attached
+			COMPREPLY=( $( command screen -ls | \
+					sed -ne 's|^['$'\t'']\+\('$cur'[0-9]\+\.[^'$'\t'']\+\).*Attached.*$|\1|p' ) )
+			;;
+		-s)
+			# shells
+			COMPREPLY=( $( grep ^${cur:-[^#]} /etc/shells ) )
+			;;
+		*)
+			;;
+		esac
+	fi
+
+	return 0
+} &&
+complete -F _screen $default screen
+
+# lftp(1) bookmark completion
+#
+have lftp &&
+_lftp()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	if [ $COMP_CWORD -eq 1 ] && [ -f ~/.lftp/bookmarks ]; then
+	    COMPREPLY=( $( compgen -W '$( sed -ne "s/^\(.*\)'$'\t''.*$/\1/p" \
+			   ~/.lftp/bookmarks )' -- $cur ) )
+	fi
+
+	return 0
+} &&
+complete -F _lftp $default lftp
+
+# ncftp(1) bookmark completion
+#
+have ncftp &&
+_ncftp()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	if [ $COMP_CWORD -eq 1 ] && [ -f ~/.ncftp/bookmarks ]; then
+	    COMPREPLY=( $( compgen -W '$( sed -ne "s/^\([^,]\{1,\}\),.*$/\1/p" \
+			   ~/.ncftp/bookmarks )' -- $cur ) )
+	fi
+
+	return 0
+} &&
+complete -F _ncftp $default ncftp
+
+# gdb(1) completion
+#
+have gdb &&
+_gdb()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	if [ $COMP_CWORD -eq 1 ]; then
+		COMPREPLY=( $( compgen -c -- $cur ) )
+	elif [ $COMP_CWORD -eq 2 ]; then
+		prev=${prev##*/}
+		COMPREPLY=( $( compgen -fW "$( command ps axo comm,pid | \
+				awk '{if ($1 ~ /^'"$prev"'/) print $2}' ) )" \
+				-- "$cur" ) )
+	fi
+} &&
+complete -F _gdb $filenames gdb
+
+# Postgresql completion
+#
+have psql && {
+_pg_databases() 
+{
+	return
+	COMPREPLY=( $( psql -l 2>/dev/null | \
+			sed -e '1,/^-/d' -e '/^(/,$d' | \
+			awk '{print $1}' | grep "^$cur" ) )
+}
+
+_pg_users()
+{
+	#COMPREPLY=( $( psql -qtc 'select usename from pg_user' template1 2>/dev/null | \
+	#		grep "^ $cur" ) )
+	#[ ${#COMPREPLY[@]} -eq 0 ] &&
+	COMPREPLY=( $( compgen -u -- $cur ) )
+}
+
+# createdb(1) completion
+#
+_createdb() 
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+	-@(h|-host=)) 
+		_known_hosts
+		return 0
+		;;
+	-@(U|-username=))
+		_pg_users
+		return 0
+		;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-D -T -E -h -p -U -W -e -q \
+			--location= --template= --encoding= --host= --port= \
+			--username= --password --echo --quiet --help' -- $cur ))
+	else
+		_pg_databases
+	fi
+}
+complete -F _createdb $default createdb
+
+# dropdb(1) completion
+#
+_dropdb() 
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+	-@(h|-host=)) 
+		_known_hosts
+		return 0
+		;;
+	-@(U|-username=))
+		_pg_users
+		return 0
+		;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-h -p -U -W -e -q \
+				--host= --port= --username= --password \
+				--interactive --echo --quiet --help' -- $cur ) )
+	else
+		_pg_databases
+	fi
+}
+complete -F _dropdb $default dropdb
+
+# psql(1) completion
+#
+_psql() 
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+	-h|--host) 
+		_known_hosts
+		return 0
+		;;
+	-U|--username)
+		_pg_users
+		return 0
+		;;
+	-d|--dbname)
+		_pg_databases
+		return 0
+		;;
+	-@(o|f)|--output|--file)
+		_filedir
+		return 0
+		;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		# return list of available options
+		COMPREPLY=( $( compgen -W '-a --echo-all -A --no-align \
+			-c --command -d --dbname -e --echo-queries \
+			-E --echo-hidden -f --file -F --filed-separator \
+			-h --host -H --html -l --list -n -o --output \
+			-p --port -P --pset -q -R --record-separator \
+			-s --single-step -S --single-line -t --tuples-only \
+			-T --table-attr -U --username -v --variable \
+			-V --version -W --password -x --expanded -X --nopsqlrc \
+			-? --help ' -- $cur ) )
+	else
+		# return list of available databases
+		_pg_databases
+	fi
+}
+complete -F _psql $default psql
+}
+
+_longopt()
+{
+	local cur opt
+
+	cur=`_get_cword`
+
+	if [[ "$cur" == --*=* ]]; then
+		opt=${cur%%=*}
+		# cut backslash that gets inserted before '=' sign
+		opt=${opt%\\*}
+		cur=${cur#*=}
+		_filedir
+		COMPREPLY=( $( compgen -P "$opt=" -W '${COMPREPLY[@]}' -- $cur))
+		return 0
+	fi
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( $1 --help 2>&1 | sed -e '/--/!d' \
+				-e 's/.*\(--[-A-Za-z0-9]\+=\?\).*/\1/' | \
+			       command grep "^$cur" | sort -u ) )
+	elif [[ "$1" == @(mk|rm)dir ]]; then
+		_filedir -d
+	else
+		_filedir
+	fi
+}
+# makeinfo and texi2dvi are defined elsewhere.
+for i in a2ps autoconf automake bc gprof ld nm objcopy objdump readelf strip \
+	 bison cpio diff patch enscript cp df dir du ln ls mkfifo mknod mv rm \
+	 touch vdir awk gperf grep grub indent less m4 sed shar date \
+	 tee who texindex cat csplit cut expand fmt fold head \
+	 md5sum nl od paste pr ptx sha1sum sort split tac tail tr unexpand \
+	 uniq wc ldd bash id irb mkdir rmdir; do
+  have $i && complete -F _longopt $filenames $i
+done
+
+# These commands use filenames, so '-o filenames' is not needed.
+for i in env netstat seq uname units wget; do
+  have $i && complete -F _longopt $default $i
+done
+unset i
+
+# gcc(1) completion
+#
+# The only unusual feature is that we don't parse "gcc --help -v" output
+# directly, because that would include the options of all the other backend
+# tools (linker, assembler, preprocessor, etc) without any indication that
+# you cannot feed such options to the gcc driver directly.  (For example, the
+# linker takes a -z option, but you must type -Wl,-z for gcc.)  Instead, we
+# ask the driver ("g++") for the name of the compiler ("cc1"), and parse the
+# --help output of the compiler.
+#
+have gcc &&
+_gcc()
+{
+	local cur cc backend
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	_expand || return 0
+
+	case "$1" in
+	gcj)
+		backend=jc1
+		;;
+	gpc)
+		backend=gpc1
+		;;
+	*77)
+		backend=f771
+		;;
+	*)
+		backend=cc1	# (near-)universal backend
+		;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		cc=$( $1 -print-prog-name=$backend )
+		# sink stderr:
+		# for C/C++/ObjectiveC it's useless
+		# for FORTRAN/Java it's an error
+		COMPREPLY=( $( $cc --help 2>/dev/null | tr '\t' ' ' | \
+			       sed -e '/^  *-/!d' -e 's/ *-\([^ ]*\).*/-\1/' | \
+			       command grep "^$cur" | sort -u ) )
+	else
+		_filedir
+	fi
+} &&
+complete $filenames -F _gcc gcc g++ c++ g77 gcj gpc
+[ $UNAME = GNU -o $UNAME = Linux -o $UNAME = Cygwin ] && \
+[ -n "${have:-}" ] && complete $filenames -F _gcc cc
+
+# Linux cardctl(8) completion
+#
+have cardctl &&
+_cardctl()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	if [ $COMP_CWORD -eq 1 ]; then
+		COMPREPLY=( $( compgen -W 'status config ident suspend \
+					   resume reset eject insert scheme' \
+			       -- $cur ) )
+	fi
+} &&
+complete -F _cardctl cardctl
+
+# This function is required by _dpkg() and _dpkg-reconfigure()
+#
+have dpkg && {
+_comp_dpkg_installed_packages()
+{
+	grep -A 1 "Package: $1" /var/lib/dpkg/status | \
+		grep -B 1 -E "ok installed|half-installed|unpacked| \
+       			      half-configured|config-files" | \
+	        grep "Package: $1" | cut -d\  -f2
+}
+
+# Debian dpkg(8) completion
+#
+_dpkg()
+{
+	local cur prev i
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+	i=$COMP_CWORD
+
+	_expand || return 0
+
+	# find the last option flag
+	if [[ $cur != -* ]]; then
+		while [[ $prev != -* && $i != 1 ]]; do
+			i=$((i-1))
+			prev=${COMP_WORDS[i-1]}
+		done
+	fi
+
+	case "$prev" in 
+	-@(c|i|A|I|f|e|x|X|-@(install|unpack|record-avail|contents|info|fsys-tarfile|field|control|extract)))
+		_filedir '?(u)deb'
+		return 0
+		;;
+	-@(b|-build))
+		_filedir -d
+		return 0
+		;;
+   	-@(s|p|l|-@(status|print-avail|list)))
+		COMPREPLY=( $( apt-cache pkgnames $cur 2>/dev/null ) )
+		return 0
+		;;
+	-@(S|-search))
+		_filedir
+		return 0
+		;;
+	-@(r|L|P|-@(remove|purge|listfiles)))
+		COMPREPLY=( $( _comp_dpkg_installed_packages $cur ) )
+		return 0
+		;;
+	*)
+
+	COMPREPLY=( $( compgen -W '-i --install --unpack -A --record-avail \
+			--configure -r --remove -P --purge --get-selections \
+			--set-selections --update-avail --merge-avail \
+			--clear-avail  --command-fd --forget-old-unavail -s \
+			--status -p --print-avail -L --listfiles -l --list \
+			-S --search -C --audit --print-architecture \
+			--print-gnu-build-architecture \
+			--print-installation-architecture \
+			--compare-versions --help --version --force-help \
+			--force-all --force-auto-select --force-downgrade \
+			--force-configure-any --force-hold --force-bad-path \
+			--force-not-root --force-overwrite \
+			--force-overwrite-diverted --force-bad-verify \
+			--force-depends-version --force-depends \
+			--force-confnew --force-confold --force-confdef \
+			--force-confmiss --force-conflicts --force-architecture\
+			--force-overwrite-dir --force-remove-reinstreq \
+			--force-remove-essential -Dh \
+			--debug=help --licence --admindir= --root= --instdir= \
+			-O --selected-only -E --skip-same-version \
+			-G --refuse-downgrade -B --auto-deconfigure \
+			--no-debsig --no-act -D --debug= --status-fd \
+			-b --build -I --info -f --field -c --contents \
+			-x --extract -X --vextract --fsys-tarfile -e --control \
+			--ignore-depends= --abort-after' -- $cur ) )
+		;;
+	esac
+
+
+}
+complete -F _dpkg $filenames dpkg dpkg-deb
+}
+
+# Debian GNU dpkg-reconfigure(8) completion
+#
+have dpkg-reconfigure &&
+_dpkg_reconfigure()
+{
+	local cur prev opt
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+
+	case "$prev" in
+	    -@(f|-frontend))
+		opt=( $( echo /usr/share/perl5/Debconf/FrontEnd/* ) )
+		opt=( ${opt[@]##*/} )
+		opt=( ${opt[@]%.pm} )
+		COMPREPLY=( $( compgen -W '${opt[@]}' -- $cur ) )
+		return 0
+		;;
+	    -@(p|-priority))
+  		COMPREPLY=( $( compgen -W 'low medium high critical' -- $cur ) )
+		return 0
+		;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+	    COMPREPLY=( $( compgen -W '-f --frontend -p --priority -a --all \
+				       -u --unseen-only -h --help -s --showold \
+				       --force --terse' -- $cur ) )
+	else
+	    COMPREPLY=( $( _comp_dpkg_installed_packages $cur ) )
+	fi
+} &&
+complete -F _dpkg_reconfigure $default dpkg-reconfigure
+
+# Debian dpkg-source completion
+#
+have dpkg-source &&
+_dpkg_source()
+{
+	local cur prev options work i action packopts unpackopts
+
+	packopts="-c -l -F -V -T -D -U -W -E -sa -i -I -sk -sp -su -sr -ss -sn -sA -sK -sP -sU -sR"
+	unpackopts="-sp -sn -su"
+	options=`echo "-x -b $packopts $unpackopts" | xargs echo | sort -u | xargs echo`
+
+	COMPREPLY=()
+	if [ "$1" != "dpkg-source" ]; then
+		exit 1
+	fi
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+	action="options"
+	for (( i=0; i < ${#COMP_WORDS[@]}-1; i++ )); do
+		if [[ ${COMP_WORDS[$i]} == "-x" ]]; then
+			action=unpack
+		elif [[ ${COMP_WORDS[$i]} == "-b" ]]; then
+			action=pack
+		elif [[ ${COMP_WORDS[$i]} == "-h" ]]; then
+			action=help
+		fi
+	done
+	# if currently seeing a complete option, return just itself.
+	for i in $options; do
+		if [ "$cur" = "$i" ]; then
+			COMPREPLY=( "$cur" )
+			return 0
+		fi
+	done
+	case "$action" in
+		"unpack")
+			if [ "$cur" = "-" -o "$cur" = "-s" ]; then
+				COMPREPLY=( $unpackots )
+				return 0
+			fi
+			case "$prev" in
+				"-x")
+					COMPREPLY=( $( compgen -d -- "$cur" ) \
+						    $( compgen -f -X '!*.dsc' -- "$cur" ) )
+					return 0
+					;;
+				*)
+					COMPREPLY=( $unpackopts $(compgen -d -f -- "$cur" ) )
+					return 0
+					;;
+			esac
+			return 0
+			;;
+		"pack")
+			if [ "$cur" = "-" ]; then
+				COMPREPLY=( $packopts )
+				return 0
+			fi
+			if [ "$cur" = "-s" ]; then
+				COMPREPLY=( "-sa" "-sk" "-sp" "-su" "-sr" "-ss" "-sn" \
+			    		"-sA" "-sK" "-sP" "-sU" "-sR" )
+				return 0
+			fi
+			case "$prev" in
+				"-b")
+					COMPREPLY=( $( compgen -d -- "$cur" ) )
+					return 0
+					;;
+				"-c"|"-l"|"-T"|"-i"|"-I")
+					# -c: get controlfile
+					# -l: get per-version info from this file
+					# -T: read variables here, not debian/substvars
+					# -i: <regexp> filter out files to ignore diffs of.
+					# -I: filter out files when building tarballs.
+					# return directory names and file names
+					COMPREPLY=( $( compgen -d -f ) )
+					return 0
+					;;
+				"-F")
+					# -F: force change log format
+					COMPREPLY=( $( ( cd /usr/lib/dpkg/parsechangelog; compgen -f "$cur" ) ) )
+					return 0
+					;;
+				"-V"|"-D")
+					# -V: set a substitution variable
+					# we don't know anything about possible variables or values
+					# so we don't try to suggest any completion.
+					COMPREPLY=()
+					return 0
+					;;
+				"-D")
+					# -D: override or add a .dsc field and value
+					# if $cur doesn't contain a = yet, suggest variable names
+					if echo -- "$cur" | grep -q "="; then
+						# $cur contains a "="
+						COMPREPLY=()
+						return 0
+					else
+						COMPREPLY=( Format Source Version Binary Maintainer Uploader Architecture Standards-Version Build-Depends Files )
+						return 0
+					fi
+					;;
+				"-U")
+					# -U: remove a field
+					# Suggest possible fieldnames
+					COMPREPLY=( Format Source Version Binary Maintainer Uploader Architecture Standards-Version Build-Depends Files )
+					return 0
+					;;
+				*)
+					COMPREPLY=( $packopts )
+					return 0
+					;;
+			esac
+			return 0
+			;;
+		*)
+			# if seeing a partial option, return possible completions.
+			if [ "$cur" = "-s" ]; then
+				COMPREPLY=( "-sa" "-sk" "-sp" "-su" "-sr" "-ss" "-sn" \
+			    		"-sA" "-sK" "-sP" "-sU" "-sR" )
+				return 0
+			fi
+			# else return all possible options.
+			COMPREPLY=( $options )
+			return 0
+			;;
+	esac
+} &&
+complete -F _dpkg_source dpkg-source
+
+# Debian Linux dselect(8) completion.
+#
+have dselect &&
+_dselect()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+	     --admindir)
+		  _filedir -d
+		  return 0
+		  ;;
+
+	     -@(D|debug))
+		  _filedir
+		  return 0
+		  ;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+	    COMPREPLY=( $( compgen -W '--admindir --help --version --licence \
+				  --license --expert --debug' -- $cur ) )
+	else
+	    COMPREPLY=( $( compgen -W 'access update select install config \
+				  remove quit' -- $cur ) )
+	fi
+
+
+	return 0
+} &&
+complete -F _dselect $filenames dselect
+
+# Java completion
+#
+
+# available path elements completion
+have java && {
+_java_path()
+{
+	cur=${cur##*:}
+	_filedir '@(jar|zip)'
+}
+
+# exact classpath determination
+_java_find_classpath()
+{
+	local i
+
+	# search first in current options
+	for (( i=1; i < COMP_CWORD; i++ )); do
+		if [[ "${COMP_WORDS[i]}" == -@(cp|classpath) ]]; then
+			classpath=${COMP_WORDS[i+1]}
+			break
+		fi
+	done
+
+	# default to environment
+	[ -z "$classpath" ] && classpath=$CLASSPATH
+
+	# default to current directory
+	[ -z "$classpath" ] && classpath=.
+}
+
+# exact sourcepath determination
+_java_find_sourcepath()
+{
+	local i
+
+	# search first in current options
+	for (( i=1; i < COMP_CWORD; i++ )); do
+		if [[ "${COMP_WORDS[i]}" == -sourcepath ]]; then
+			sourcepath=${COMP_WORDS[i+1]}
+			break
+		fi
+	done
+
+	# default to classpath
+	[ -z "$sourcepath" ] && _java_find_classpath
+	sourcepath=$classpath
+}
+
+# available classes completion
+_java_classes()
+{
+	local classpath i
+
+	# find which classpath to use
+	_java_find_classpath
+
+	# convert package syntax to path syntax
+	cur=${cur//.//}
+	# parse each classpath element for classes
+	for i in ${classpath//:/ }; do
+		if [ -r $i ] && [[ "$i" == *.@(jar|zip) ]]; then
+			if type zipinfo &> /dev/null; then
+				COMPREPLY=( "${COMPREPLY[@]}" $( zipinfo -1 \
+				"$i" | grep "^$cur" | grep '\.class$' | \
+				grep -v "\\$" ) )
+			else
+				COMPREPLY=( "${COMPREPLY[@]}" $( jar tf "$i" \
+				"$cur" | grep "\.class$" | grep -v "\\$" ) )
+			fi
+
+		elif [ -d $i ]; then
+			i=${i%/}
+			COMPREPLY=( "${COMPREPLY[@]}" $( find "$i" -type f \
+			-path "$i/$cur*.class" 2>/dev/null | \
+			grep -v "\\$" | sed -e "s|^$i/||" ) )
+		fi
+	done
+
+	# remove class extension
+	COMPREPLY=( ${COMPREPLY[@]%.class} )
+	# convert path syntax to package syntax
+	COMPREPLY=( ${COMPREPLY[@]//\//.} )
+}
+
+# available packages completion
+_java_packages()
+{
+	local sourcepath i
+
+	# find wich sourcepath to use
+	_java_find_sourcepath
+
+	# convert package syntax to path syntax
+	cur=${cur//.//}
+	# parse each sourcepath element for packages
+	for i in ${sourcepath//:/ }; do
+		if [ -d $i ]; then
+			COMPREPLY=( "${COMPREPLY[@]}" $( command ls -F -d \
+				$i/$cur* 2>/dev/null | sed -e 's|^'$i'/||' ) )
+		fi
+	done
+	# keep only packages
+	COMPREPLY=( $( echo "${COMPREPLY[@]}" | tr " " "\n" | grep "/$" ) )
+	# remove packages extension
+	COMPREPLY=( ${COMPREPLY[@]%/} )
+	# convert path syntax to package syntax
+	cur=${COMPREPLY[@]//\//.}
+}
+
+# java completion
+#
+_java()
+{
+	local cur prev i
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	for ((i=1; i < $COMP_CWORD; i++)); do
+		case ${COMP_WORDS[$i]} in
+		    -cp|-classpath)
+			((i++))	# skip the classpath string.
+			;;
+		    -*)
+			# this is an option, not a class/jarfile name.
+			;;
+		    *)
+			# once we've seen a class, just do filename completion
+			_filedir
+			return 0
+			;;
+		esac
+	done
+
+	case $prev in
+		-@(cp|classpath))
+			_java_path
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		# relevant options completion
+		COMPREPLY=( $( compgen -W '-client -hotspot -server -classic \
+				-cp -classpath -D -verbose -verbose:class \
+				-verbose:gc -version:jni -version \
+				-showversion -? -help -X -jar \
+				-ea -enableassertions -da -disableassertions \
+				-esa -enablesystemassertions \
+				-dsa -disablesystemassertions ' -- $cur ) )
+	else
+		if [[ "$prev" == -jar ]]; then
+			# jar file completion
+			_filedir jar
+		else
+			# classes completion
+			_java_classes
+		fi
+	fi
+}
+complete -F _java $filenames java
+}
+
+# javadoc completion
+#
+have javadoc &&
+_javadoc()
+{
+	COMPREPLY=()
+	local cur prev
+
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case $prev in
+		-@(overview|helpfile|stylesheetfile))
+			_filedir
+			return 0
+			;;
+		-d)
+			_filedir -d
+			return 0
+			;;
+		-@(classpath|bootclasspath|docletpath|sourcepath|extdirs))
+			_java_path
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		# relevant options completion
+		COMPREPLY=( $( compgen -W '-overview -public -protected \
+				-package -private -help -doclet -docletpath \
+				-sourcepath -classpath -exclude -subpackages \
+				-breakiterator -bootclasspath -source -extdirs \
+				-verbose -locale -encoding -J -d -use -version \
+				-author -docfilessubdirs -splitindex \
+				-windowtitle -doctitle -header -footer -bottom \
+				-link -linkoffline -excludedocfilessubdir \
+				-group -nocomment -nodeprecated -noqualifier \
+				-nosince -nodeprecatedlist -notree -noindex \
+				-nohelp -nonavbar -quiet -serialwarn -tag \
+				-taglet -tagletpath -charset -helpfile \
+				-linksource -stylesheetfile -docencoding' -- \
+				$cur ) )
+	else
+		# source files completion
+		_filedir java
+		# packages completion
+		_java_packages
+	fi
+} &&
+complete -F _javadoc $filenames javadoc
+
+# javac completion
+#
+have javac &&
+_javac()
+{
+	COMPREPLY=()
+	local cur prev
+
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case $prev in
+		-d)
+			_filedir -d
+			return 0
+			;;
+		-@(classpath|bootclasspath|sourcepath|extdirs))
+			_java_path
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		# relevant options completion
+		COMPREPLY=( $( compgen -W '-g -g:none -g:lines -g:vars\
+		-g:source -O -nowarn -verbose -deprecation -classpath\
+		-sourcepath -bootclasspath -extdirs -d -encoding -source\
+		-target -help' -- $cur ) )
+	else
+		# source files completion
+		_filedir java
+	fi
+} &&
+complete -F _javac $filenames javac
+
+# PINE address-book completion
+#
+have pine &&
+_pineaddr()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	COMPREPLY=( $( compgen -W '$( awk "{print \$1}" ~/.addressbook 2>/dev/null)' \
+			-- $cur ) )
+} &&
+complete -F _pineaddr $default pine
+
+# mutt completion
+#
+# Mutt doesn't have an "addressbook" like Pine, but it has aliases and
+# a "query" function to retrieve addresses, so that's what we use here.
+have mutt || have muttng && {
+_muttaddr()
+{
+	_muttaliases
+	_muttquery
+	return 0
+}
+
+_muttconffiles()
+{
+	local file sofar
+	local -a newconffiles
+
+	sofar=" $1 "
+	shift
+	while [[ "$1" ]]; do
+	    newconffiles=( $(sed -rn 's|^source[[:space:]]+([^[:space:]]+).*$|\1|p' $(eval echo $1) ) )
+	    for file in "${newconffiles[@]}"; do
+		[[ ! "$file" ]] || [[ "${sofar/ ${file} / }" != "$sofar" ]] &&
+		    continue
+		sofar="$sofar $file"
+		sofar=" $(eval _muttconffiles \"$sofar\" $file) "
+	    done
+	    shift
+	done
+	echo $sofar
+}
+
+_muttaliases()
+{
+	local cur muttrc
+	local -a conffiles aliases
+	cur=`_get_cword`
+
+	[ -f ~/.${muttcmd}/${muttcmd}rc ] && muttrc="~/.${muttcmd}/${muttcmd}rc"
+	[ -f ~/.${muttcmd}rc ] && muttrc="~/.${muttcmd}rc"
+	[ -z "$muttrc" ] && return 0
+
+	conffiles=( $(eval _muttconffiles $muttrc $muttrc) )
+	aliases=( $( sed -rn 's|^alias[[:space:]]+([^[:space:]]+).*$|\1|p' \
+			$(eval echo "${conffiles[@]}") ) )
+	COMPREPLY=( "${COMPREPLY[@]}" $( compgen -W "${aliases[*]}" -- $cur ) )
+
+	return 0
+}
+
+_muttquery()
+{
+	local cur querycmd
+	local -a queryresults
+	cur=`_get_cword`
+
+	querycmd="$( $muttcmd -Q query_command  | sed -r 's|^query_command=\"(.*)\"$|\1|; s|%s|'$cur'|' )"
+	if [ -z "$cur" -o -z "$querycmd" ]; then
+	    queryresults=()
+	else 
+	    queryresults=( $( $querycmd | \
+	      sed -nr '2,$s|^([^[:space:]]+).*|\1|p' ) )
+	fi
+
+	COMPREPLY=( "${COMPREPLY[@]}" $( compgen -W "${queryresults[*]}" \
+			-- $cur ) )
+
+	return 0
+}
+
+_muttfiledir()
+{
+	local cur folder spoolfile
+	cur=`_get_cword`
+
+	# This is currently not working so well. Perhaps this function should
+	# just call _filedir() for the moment.
+	if [[ $cur == [=+]* ]]; then
+		folder="$( $muttcmd -Q folder | sed -r 's|^folder=\"(.*)\"$|\1|' )"
+		: folder:=~/Mail
+
+		# Match any file in $folder beginning with $cur
+		# (minus the leading '=' sign).
+		COMPREPLY=( $( compgen -f -- "$folder/${cur:1}" ) )
+		COMPREPLY=( ${COMPREPLY[@]#$folder/} )
+		return 0
+	elif [ "$cur" == !* ]; then
+		spoolfile="$( $muttcmd -Q spoolfile | sed -r 's|^spoolfile=\"(.*)\"$|\1|' )"
+		[ ! -z "$spoolfile" ] && eval cur="${cur/^!/$spoolfile}";
+	fi
+	_filedir
+
+	return 0
+}
+
+_mutt()
+{
+	local cur prev
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	COMPREPLY=()
+	
+	[ ${COMP_WORDS[0]} == muttng ] && muttcmd="muttng" || muttcmd="mutt"
+
+	case "$cur" in
+	-*)
+		COMPREPLY=( $( compgen -W '-A -a -b -c -e -f -F -H -i -m -n \
+					    -p -Q -R -s -v -x -y -z -Z -h' \
+					    -- $cur ) )
+		return 0
+		;;
+	*)
+	    case "$prev" in
+	    -@(a|f|F|H|i))
+		    _muttfiledir
+		    return 0
+		    ;;
+	    -A)
+		    _muttaliases
+		    return 0
+		    ;;
+	    -@(e|m|Q|s|h|p|R|v|y|z|Z))
+		    return 0
+		    ;;
+	    *)
+		    _muttaddr
+		    return 0
+		    ;;
+	    esac
+	    ;;
+	esac
+	
+}
+complete -F _mutt $default $filenames mutt muttng
+}
+
+_configure_func()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	# if $COMP_CONFIGURE_HINTS is not null, then completions of the form
+	# --option=SETTING will include 'SETTING' as a contextual hint
+	[[ "$cur" != -* ]] && return 0
+
+	if [ -n "$COMP_CONFIGURE_HINTS" ]; then
+		COMPREPLY=( $( $1 --help | awk '/^  --[A-Za-z]/ { print $1; if ($2 ~ /--[A-Za-z]/) print $2 }' | sed -e 's/[[,].*//g' | grep ^$cur ) )
+
+	else
+		COMPREPLY=( $( $1 --help | awk '/^  --[A-Za-z]/ { print $1; if ($2 ~ /--[A-Za-z]/) print $2 }' | sed -e 's/[[,=].*//g' | grep ^$cur ) )
+	fi
+}
+complete -F _configure_func $default configure
+
+# Debian reportbug(1) completion
+#
+have reportbug &&
+_reportbug()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+	    -f|--filename|-i|--include|--mta|-o|--output)
+		_filedir
+		return 0
+		;;
+	    -B|--bts)
+		COMPREPLY=( $( compgen -W "debian guug kde mandrake help" -- \
+			       $cur ))
+		return 0
+		;;
+	    -e|--editor|--mua)
+		COMP_WORDS=(COMP_WORDS[0] $cur)
+		COMP_CWORD=1
+		_command
+		return 0
+		;;
+	    --mode)
+		COMPREPLY=( $( compgen -W "novice standard expert" -- $cur ) )
+		return 0
+		;;
+	    -S|--severity)
+		COMPREPLY=( $( compgen -W "grave serious important normal \
+					   minor wishlist" -- $cur ) )
+		return 0
+		;;
+	    -u|--ui|--interface)
+		COMPREPLY=( $( compgen -W "newt text gnome" -- $cur ) )
+		return 0
+		;;
+	    -t|--type)
+		COMPREPLY=( $( compgen -W "gnats debbugs" -- $cur ) )
+		return 0
+		;;
+	    -T|--tags)
+		COMPREPLY=( $( compgen -W "none patch security upstream sid \
+					   woody potato sarge fixed" -- $cur ))
+		return 0
+		;;
+	    *)
+		;;
+	esac
+	
+	COMPREPLY=($( compgen -W '-h --help -v --version -a --af -b \
+			--no-query-bts --query-bts -B --bts -c --configure \
+			--no-config-files --check-available -d --debug \
+			--no-check-available -e --editor --email -f \
+			--filename -g --gnupg -H --header -i --include -j \
+			--justification -l --ldap --no-ldap -L --list-cc -m \
+			--maintonly --mode --mua --mta --mutt -n --mh --nmh \
+			-o --output -p --print -P --pgp --proxy --http_proxy\
+			-q --quiet -Q --query-only --realname --report-quiet \
+			--reply-to --replyto -s --subject -S --severity \
+			--smtphost -t --type -T --tags --template -V -x \
+			--no-cc --package-version -z --no-compress \
+			--ui --interface -u \
+			wnpp boot-floppies kernel-image' -- $cur ) \
+	    		$( apt-cache pkgnames -- $cur 2> /dev/null ) )
+	_filedir
+	return 0
+} &&
+complete -F _reportbug $filenames reportbug
+
+# Debian querybts(1) completion
+#
+have querybts &&
+_querybts()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+	    -B|--bts)
+		COMPREPLY=( $( compgen -W "debian guug kde mandrake help" -- \
+			       $cur ))
+		return 0
+		;;
+	    -u|--ui|--interface)
+		COMPREPLY=($( compgen -W "newt text gnome" -- $cur ))
+		return 0
+		;;
+	    *)
+		;;
+	esac
+
+	COMPREPLY=($( compgen -W '-h --help -v --version -A --archive \
+			-B --bts -l --ldap --no-ldap --proxy= --http_proxy= \
+			-s --source -w --web -u --ui --interface \
+			wnpp boot-floppies' -- $cur ) \
+	    		$( apt-cache pkgnames -- $cur 2> /dev/null ) )
+} &&
+complete -F _querybts $filenames querybts
+
+# update-alternatives completion
+#
+have update-alternatives && {
+installed_alternatives()
+{
+	local admindir
+	# find the admin dir
+	for i in alternatives dpkg/alternatives rpm/alternatives; do
+		[ -d /var/lib/$i ] && admindir=/var/lib/$i && break
+	done
+	for (( i=1; i < COMP_CWORD; i++ )); do
+		if [[ "${COMP_WORDS[i]}" == --admindir ]]; then
+			admindir=${COMP_WORDS[i+1]}
+			break
+		fi
+	done
+	COMPREPLY=( $( command ls $admindir | grep "^$cur" ) )
+}
+
+_update_alternatives()
+{
+	local cur prev mode args i
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+	--@(altdir|admindir))
+		_filedir -d
+		return 0
+		;;
+	--@(help|version))
+		return 0
+		;;
+	esac
+
+	# find wich mode to use and how many real args used so far
+	for (( i=1; i < COMP_CWORD; i++ )); do
+		if [[ "${COMP_WORDS[i]}" == --@(install|remove|auto|display|config|remove-all) ]]; then
+			mode=${COMP_WORDS[i]}
+			args=$(($COMP_CWORD - i))
+			break
+		fi
+	done
+
+	case $mode in
+	--install)
+		case $args in
+		1)
+			_filedir
+			;;
+		2)
+			installed_alternatives
+			;;
+		3)
+			_filedir
+			;;
+		esac
+		;;
+	--remove)
+		case $args in
+		1)
+			installed_alternatives
+			;;
+		2)
+			_filedir
+			;;
+		esac
+		;;
+	--auto)
+		installed_alternatives
+		;;
+	--remove-all)
+		installed_alternatives
+		;;
+	--display)
+		installed_alternatives
+		;;
+	--config)
+		installed_alternatives
+		;;
+	*)
+		COMPREPLY=( $( compgen -W '--verbose --quiet --help --version \
+			       --altdir --admindir' -- $cur ) \
+			    $( compgen -W '--install --remove --auto --display \
+			       --config' -- $cur ) )
+	esac
+}
+complete -F _update_alternatives update-alternatives
+}
+
+# Python completion
+#
+have python &&
+_python()
+{
+	local prev cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]##*/}
+
+	case "$prev" in
+	-Q)
+		COMPREPLY=( $( compgen -W "old new warn warnall" -- $cur ) )
+		return 0
+		;;
+	-W)
+		COMPREPLY=( $( compgen -W "ignore default all module once error" -- $cur ) )
+		return 0
+		;;
+	-c)
+		_filedir '@(py|pyc|pyo)'
+		return 0
+		;;
+	!(python|-?))
+		[[ ${COMP_WORDS[COMP_CWORD-2]} != -@(Q|W) ]] && _filedir
+		;;
+	esac
+
+
+	# if '-c' is already given, complete all kind of files.
+	for (( i=0; i < ${#COMP_WORDS[@]}-1; i++ )); do
+		if [[ ${COMP_WORDS[i]} == -c ]]; then
+			_filedir
+		fi
+	done
+
+
+	if [[ "$cur" != -* ]]; then
+		_filedir '@(py|pyc|pyo)'
+	else
+		COMPREPLY=( $( compgen -W "- -d -E -h -i -O -Q -S -t -u \
+					   -U -v -V -W -x -c" -- $cur ) )
+	fi
+
+
+
+	return 0
+} &&
+complete -F _python $filenames python
+
+# Perl completion
+#
+have perl &&
+{
+_perlmodules()
+{
+    COMPREPLY=( $( compgen -P "$prefix" -W "$( perl -e 'sub mods { my ($base,$dir)=@_; return if  $base !~ /^\Q$ENV{cur}/; chdir($dir) or return; for (glob(q[*.pm])) {s/\.pm$//; print qq[$base$_\n]}; mods(/^(?:[.\d]+|$Config{archname}-$Config{osname}|auto)$/ ? undef : qq[${base}${_}\\\\:\\\\:],qq[$dir/$_]) for grep {-d} glob(q[*]); } mods(undef,$_) for @INC;' )" -- $cur ) )
+}
+
+_perl()
+{
+    local cur prev prefix temp
+
+    COMPREPLY=()
+    cur=`_get_cword`
+    prev=${COMP_WORDS[COMP_CWORD-1]}
+    prefix=""
+
+    # completing an option (may or may not be separated by a space)
+    if [[ "$cur" == -?* ]]; then
+	temp=$cur
+	prev=${temp:0:2}
+	cur=${temp:2}
+	prefix=$prev
+    fi
+
+    # only handle module completion for now
+    case "$prev" in
+    	-I|-x)
+	    COMPREPLY=( $( compgen -d -P "$prev" -- "$cur" ) )
+	    return 0
+	    ;;
+	-m|-M)
+	    _perlmodules
+	    return 0
+	    ;;
+    esac
+
+    # handle case where first parameter is not a dash option
+    if [[ "${COMP_WORDS[COMP_CWORD]}" != -* ]]; then
+	_filedir
+	return 0
+    fi
+
+    # complete using basic options
+    COMPREPLY=( $( compgen -W '-C -s -T -u -U -W -X -h -v -V -c -w -d -D -p \
+			-n -a -F -l -0 -I -m -M -P -S -x -i -e ' -- $cur ) )
+    return 0
+}
+complete -F _perl $filenames perl
+
+_perldoc()
+{
+    local cur prev prefix temp
+
+    COMPREPLY=()
+    cur=`_get_cword`
+    prev=${COMP_WORDS[COMP_CWORD-1]}
+    prefix=""
+
+    # completing an option (may or may not be separated by a space)
+    if [[ "$cur" == -?* ]]; then
+	temp=$cur
+	prev=${temp:0:2}
+	cur=${temp:2}
+	prefix=$prev
+    fi
+
+    # complete builtin perl functions
+    case $prev in
+	-f)
+	    COMPREPLY=( $( compgen -W 'chomp chop chr crypt hex index lc \
+	    lcfirst length oct ord pack q qq reverse rindex sprintf \
+	    substr tr uc ucfirst y m pos quotemeta s split study qr abs \
+	    atan2 cos exp hex int log oct rand sin sqrt srand pop push \
+	    shift splice unshift grep join map qw reverse sort unpack \
+	    delete each exists keys values binmode close closedir \
+	    dbmclose dbmopen die eof fileno flock format getc print \
+	    printf read readdir rewinddir seek seekdir select syscall \
+	    sysread sysseek syswrite tell telldir truncate warn write \
+	    pack read syscall sysread syswrite unpack vec -X chdir chmod \
+	    chown chroot fcntl glob ioctl link lstat mkdir open opendir \
+	    readlink rename rmdir stat symlink umask unlink utime caller \
+	    continue do dump eval exit goto last next redo return \
+	    sub wantarray caller import local my our package use defined \
+	    formline reset scalar undef \
+	    alarm exec fork getpgrp getppid getpriority kill pipe qx \
+	    setpgrp setpriority sleep system times wait waitpid \
+	    import no package require use bless dbmclose dbmopen package \
+	    ref tie tied untie use accept bind connect getpeername \
+	    getsockname getsockopt listen recv send setsockopt shutdown \
+	    socket socketpair msgctl msgget msgrcv msgsnd semctl semget \
+	    semop shmctl shmget shmread shmwrite endgrent endhostent \
+	    endnetent endpwent getgrent getgrgid getgrnam getlogin \
+	    getpwent getpwnam getpwuid setgrent setpwent endprotoent \
+	    endservent gethostbyaddr gethostbyname gethostent \
+	    getnetbyaddr getnetbyname getnetent getprotobyname \
+	    getprotobynumber getprotoent getservbyname getservbyport \
+	    getservent sethostent setnetent setprotoent setservent \
+	    gmtime localtime time times' -- $cur ) )
+	    return 0
+	    ;;
+    esac
+
+    case $cur in
+	-*)
+	    COMPREPLY=( $( compgen -W '-h -v -t -u -m -l -F -X -f -q' -- $cur ))
+	    return 0
+	    ;;
+	*/*)
+	    return 0
+	    ;;
+	*)
+	    _perlmodules
+	    COMPREPLY=( "${COMPREPLY[@]}" $( compgen -W '$( PAGER=cat man perl 2>/dev/null | sed -ne "/perl.*Perl overview/,/perlwin32/s/^[^a-z0-9]*\([a-z0-9]*\).*$/\1/p")' -- $cur ) )
+
+	    return 0
+	    ;;
+    esac
+}
+complete -F _perldoc $default perldoc
+}
+
+# rcs(1) completion
+#
+have rcs &&
+_rcs()
+{
+	local cur prev file dir i
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	file=${cur##*/}
+	dir=${cur%/*}
+
+	# deal with relative directory
+	[ "$file" = "$dir" ] && dir=.
+
+	COMPREPLY=( $( compgen -f "$dir/RCS/$file" ) )
+
+	for (( i=0; i < ${#COMPREPLY[@]}; i++ )); do
+		file=${COMPREPLY[$i]##*/}
+		dir=${COMPREPLY[$i]%RCS/*}
+		COMPREPLY[$i]=$dir$file
+	done
+	
+	COMPREPLY=( "${COMPREPLY[@]}" $( compgen -G "$dir/$file*,v" ) )
+
+	for (( i=0; i < ${#COMPREPLY[@]}; i++ )); do
+		COMPREPLY[$i]=${COMPREPLY[$i]%,v}
+	done
+
+	# default to files if nothing returned and we're checking in.
+	# otherwise, default to directories
+	[ ${#COMPREPLY[@]} -eq 0 -a $1 = ci ] && _filedir || _filedir -d
+} &&
+complete -F _rcs $filenames ci co rlog rcs rcsdiff
+
+# lilo(8) completion
+#
+have lilo && {
+_lilo_labels()
+{
+	COMPREPLY=( $( awk -F'=' '/label/ {print $2}' \
+		/etc/lilo.conf | sed -e 's/"//g' | grep "^$cur" ) )
+}
+
+_lilo()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case $prev in
+		-@(C|i|m|s|S))
+			_filedir
+			return 0
+			;;
+		-r)
+			_filedir -d
+			return 0
+			;;
+		-@(I|D|R))
+			# label completion
+			_lilo_labels
+			return 0
+			;;
+		-@(A|b|M|u|U))
+			# device completion
+			cur=${cur:=/dev/}
+			_filedir
+			return 0
+			;;
+		-T)
+			# topic completion
+			COMPREPLY=( $( compgen -W 'help ChRul EBDA geom geom= \
+					table= video' -- $cur ) )
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		# relevant options completion
+		COMPREPLY=( $( compgen -W '-A -b -c -C -d -f -g -i -I -l -L -m \
+			-M -p -P -q -r -R -s -S -t -T -u -U -v -V -w -x -z' -- \
+			$cur ) )
+	fi
+}
+complete -F _lilo lilo
+}
+
+# links completion
+#
+have links &&
+_links()
+{
+	local cur
+  
+	COMPREPLY=()
+	cur=`_get_cword`
+  
+	case "$cur" in
+	    --*)
+		COMPREPLY=( $( compgen -W '--help' -- $cur ) )
+		;;
+	    -*)
+		COMPREPLY=( $( compgen -W '-async-dns -max-connections \
+				-max-connections-to-host -retries \
+				-receive-timeout -unrestartable-receive-timeout\
+				-format-cache-size -memory-cache-size \
+				-http-proxy -ftp-proxy -download-dir \
+				-assume-codepage -anonymous -dump -no-connect \
+				-source -version -help' -- $cur ) )
+		;;
+	    *)
+		if [ -r ~/.links/links.his ]; then
+		    COMPREPLY=( $( compgen -W '$( < ~/.links/links.his )' \
+				   -- $cur ) )
+		fi
+				_filedir '@(htm|html)'
+				return 0
+		;;
+	esac
+  
+	return 0
+} &&
+complete -F _links $filenames links
+
+[ $UNAME = FreeBSD ] && {
+# FreeBSD package management tool completion
+#
+_pkg_delete()
+{
+	local cur pkgdir prev
+
+	pkgdir=${PKG_DBDIR:-/var/db/pkg}/
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	[ "$prev" = "-o" -o "$prev" = "-p" -o "$prev" = "-W" ] && return 0
+
+	COMPREPLY=( $( compgen -d $pkgdir$cur ) )
+	COMPREPLY=( ${COMPREPLY[@]#$pkgdir} )
+
+	return 0
+}
+complete -F _pkg_delete $dirnames pkg_delete pkg_info
+have pkg_deinstall && complete -F _pkg_delete $dirnames pkg_deinstall
+
+# FreeBSD kernel module commands
+#
+_kldload()
+{
+	local cur moddir
+
+	moddir=/modules/
+	[ -d $moddir ] || moddir=/boot/kernel/
+	cur=`_get_cword`
+
+	COMPREPLY=( $( compgen -f $moddir$cur ) )
+	COMPREPLY=( ${COMPREPLY[@]#$moddir} )
+	COMPREPLY=( ${COMPREPLY[@]%.ko} )
+
+	return 0
+}
+complete -F _kldload $filenames kldload
+
+_kldunload()
+{
+	local cur
+	cur=`_get_cword`
+	COMPREPLY=( $(kldstat | sed -ne "s/^.*[ \t]\+\($cur[a-z_]\+\).ko$/\1/p") )
+}
+complete -F _kldunload $filenames kldunload
+}
+
+# FreeBSD portupgrade completion
+#
+have portupgrade &&
+_portupgrade()
+{
+	local cur pkgdir prev
+
+	pkgdir=${PKG_DBDIR:-/var/db/pkg}/
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	[ "$prev" = "-l" -o "$prev" = "-L" -o "$prev" = "-o" ] && return 0
+
+	COMPREPLY=( $( compgen -d $pkgdir$cur ) )
+	COMPREPLY=( ${COMPREPLY[@]#$pkgdir} )
+	COMPREPLY=( ${COMPREPLY[@]%-*} )
+
+	return 0
+} &&
+complete -F _portupgrade $dirnames portupgrade
+
+# FreeBSD portinstall completion
+#
+have portinstall &&
+_portinstall()
+{
+	local cur portsdir prev indexfile
+	local -a COMPREPLY2
+
+	portsdir=${PORTSDIR:-/usr/ports}/
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+	# First try INDEX-5
+	indexfile=$portsdir/INDEX-5
+	# Then INDEX if INDEX-5 does not exist or system is not FreeBSD 5.x
+	[ "${OSTYPE%.*}" = "freebsd5" -a -f $indexfile ] ||
+	  indexfile=$portsdir/INDEX
+
+	[ "$prev" = "-l" -o "$prev" = "-L" -o "$prev" = "-o" ] && return 0
+
+	COMPREPLY=( $( egrep "^$cur" < $indexfile | cut -d'|' -f1 ) )
+	COMPREPLY2=( $( egrep "^[^\|]+\|$portsdir$cur" < $indexfile | \
+			cut -d'|' -f2 ) )
+	COMPREPLY2=( ${COMPREPLY2[@]#$portsdir} )
+	COMPREPLY=( "${COMPREPLY[@]}" "${COMPREPLY2[@]}" )
+
+	return 0
+} &&
+complete -F _portinstall $dirnames portinstall
+
+# Slackware Linux removepkg completion
+#
+have removepkg && [ -f /etc/slackware-version ] &&
+_removepkg()
+{
+	local packages cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	COMPREPLY=( $( (cd /var/log/packages; compgen -f -- "$cur") ) )
+} &&
+complete -F _removepkg $filenames removepkg &&
+	complete $dirnames -f -X '!*.tgz' installpkg upgradepkg explodepkg
+
+# look(1) completion
+#
+have look && 
+_look()
+{
+	local cur
+  
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	if [ $COMP_CWORD = 1 ]; then
+		COMPREPLY=( $( compgen -W '$(look $cur)' ) )
+	fi
+} &&
+complete -F _look $default look
+
+# ypcat(1) and ypmatch(1) completion
+#
+have ypmatch &&
+_ypmatch()
+{
+	local cur map
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	[ $1 = ypcat ] && [ $COMP_CWORD -gt 1 ] && return 0
+	[ $1 = ypmatch ] && [ $COMP_CWORD -gt 2 ] && return 0
+
+	if [ $1 = ypmatch ] && [ $COMP_CWORD -eq 1 ] && \
+	   [ ${#COMP_WORDS[@]} -eq 3 ]; then
+		map=${COMP_WORDS[2]}
+		COMPREPLY=( $( compgen -W '$( ypcat $map | \
+						cut -d':' -f 1 )' -- $cur) )
+	else
+		[ $1 = ypmatch ] && [ $COMP_CWORD -ne 2 ] && return 0
+		COMPREPLY=( $( compgen -W \
+			      '$( echo $(ypcat -x | cut -d"\"" -f 2))' -- $cur))
+	fi
+
+	return 0
+} &&
+complete -F _ypmatch ypmatch ypcat
+
+# mplayer(1) completion
+#
+have mplayer && {
+_mplayer_options_list()
+{
+	cur=${cur%\\}
+	COMPREPLY=( $( $1 $2 help 2> /dev/null | \
+		sed -e '1,/^Available/d' | awk '{print $1}' | \
+		sed -e 's/:$//' -e 's/^'${2#-}'$//' -e 's/<.*//' | \
+		grep "^$cur" ) )
+}
+
+_mplayer()
+{
+	local cmd cur prev skinsdir IFS=$' \t\n' i j k=0
+
+	COMPREPLY=()
+	cmd=${COMP_WORDS[0]}
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-@(ac|afm|vc|vfm|ao|vo|vop|fstype))
+			_mplayer_options_list mplayer $prev
+			return 0
+			;;
+		-@(oac|ovc|of))
+			_mplayer_options_list mencoder $prev
+			return 0
+			;;
+		-audiofile)
+			_filedir '@(mp3|MP3|mpg|MPG|ogg|OGG|wav|WAV|mid|MID|flac|FLAC|mka|MKA)'
+			return 0
+			;;
+		-font)
+			_filedir '@(desc|ttf)'
+			return 0
+			;;
+		-sub)
+			_filedir '@(srt|SRT|sub|SUB|txt|TXT|utf|UTF|rar|RAR|mpsub|smi|js|ssa|SSA|aas|AAS)'
+			return 0
+			;;
+		-vobsub)
+			_filedir '@(idx|IDX|ifo|IFO|sub|SUB)'
+			IFS=$'\t\n' 
+			COMPREPLY=( $( for i in "${COMPREPLY[@]}"; do
+						if [ -f $i -a -r $i ]; then
+							echo ${i%.*}
+						else
+							echo $i
+						fi
+				       done ) )
+			IFS=$' \t\n' 
+			return 0
+			;;
+		-ifo)
+			_filedir '@(ifo|IFO)'
+			return 0
+			;;
+		-cuefile)
+			_filedir '@(bin|BIN|cue|CUE)'
+			return 0
+			;;
+		-skin)
+			# if you don't have installed mplayer in /usr/local you
+			# may want to set the MPLAYER_SKINS_DIR global variable
+			if [ -n "$MPLAYER_SKINS_DIR" ]; then
+				skinsdir=$MPLAYER_SKINS_DIR
+			else
+				skinsdir=/usr/local/share/mplayer/Skin
+			fi
+
+			IFS=$'\t\n' 
+			for i in ~/.mplayer/Skin $skinsdir; do
+				if [ -d $i -a -r $i ]; then
+					for j in $( compgen -d $i/$cur ); do
+						COMPREPLY[$k]=${j#$i/}
+						k=$((++k))
+					done
+				fi
+			done
+			IFS=$' \t\n' 
+			return 0
+			;;
+		-@(mixer|@(cdrom|dvd)-device|dvdauth|fb|zrdev))
+			cur=${cur:=/dev/}
+			_filedir
+			return 0
+			;;
+		-@(edl?(out)|lircconf|menu-cfg|playlist|csslib|dumpfile)| \
+		-@(subfile|vobsub|aofile|fbmodeconfig|include|o|dvdkey)| \
+		-passlogfile)
+			_filedir
+			return 0
+			;;
+		-@(auto@(q|sync)|loop|menu-root|speed|sstep|aid|alang)| \
+		-@(?(@(audio|sub)-)demuxer|bandwidth|cache|chapter)| \
+		-@(dvd?(angle)|fps|frames|mc|passwd|user|sb|srate|ss|vcd)| \
+		-@(vi?(d|vo)|ffactor|sid|slang|spu@(align|aa|gauss))| \
+		-@(vobsubid|delay|bpp|brightness|contrast|dfbopts|display)| \
+		-@(fbmode|geometry|guiwid|hue|icelayer|screen[wh]|wid)| \
+		-@(monitor@(aspect|-@(dotclock|[hv]freq))|panscan|saturation)| \
+		-@(xineramascreen|zr@(crop|norm|quality|[xy]doff|[vh]dec))| \
+		-@(aspect|pp|x|y|xy|z|stereo|audio-@(density|delay|preload))| \
+		-@(endpos|osdlevel|ffourcc|sws|channels|skiplimit|format)| \
+		-@(ofps|aa@(driver|@(osd|sub)color)|vobsubout?(i@(ndex|d)))| \
+		-sub@(-bg-@(alpha|color)|cp|delay|fps|pos|align|width)| \
+		-sub@(font-@(blur|outline|autoscale|encoding|@(osd|text)-scale)))
+			return 0
+			;;
+		-lavdopts)
+			COMPREPLY=( $( compgen -W 'ec er= bug= idct= gray' \
+					-- $cur ) )
+			return 0
+			;;
+		-lavcopts)
+			COMPREPLY=( $( compgen -W 'vcodec= vqmin= vqscale= \
+					vqmax= mbqmin= mbqmax= vqdiff= \
+					vmax_b_frames= vme= vhq v4mv \
+					keyint= vb_strategy= vpass= \
+					aspect= vbitrate= vratetol= \
+					vrc_maxrate= vrc_minrate= \
+					vrc_buf_size= vb_qfactor= vi_qfactor= \
+					vb_qoffset= vi_qoffset= vqblur= \
+					vqcomp= vrc_eq= vrc_override= \
+					vrc_init_cplx= vqsquish= vlelim= \
+					vcelim= vstrict= vdpart vpsize= gray \
+					vfdct= idct= lumi_mask= dark_mask= \
+					tcplx_mask= scplx_mask= naq ildct \
+					format= pred qpel precmp= cmp= \
+					subcmp= predia= dia= trell last_pred= \
+					preme= subq= psnr mpeg_quant aic umv' \
+					-- $cur ) )
+			return 0
+			;;
+		-ssf)
+			COMPREPLY=( $( compgen -W 'lgb= cgb= ls= cs= chs= \
+					cvs=' -- $cur ) )
+			return 0
+			;;
+		-jpeg)
+			COMPREPLY=( $( compgen -W 'noprogressive progressive \
+					nobaseline baseline optimize= \
+					smooth= quality= outdir=' -- $cur ) )
+			return 0
+			;;
+		-xvidopts)
+			COMPREPLY=( $( compgen -W 'dr2 nodr2' -- $cur ) )
+			return 0
+			;;
+		-xvidencopts)
+			COMPREPLY=( $( compgen -W 'pass= bitrate= \
+					fixed_quant= me_quality= 4mv \
+					rc_reaction_delay_factor= \
+					rc_averaging_period= rc_buffer= \
+					quant_range= min_key_interval= \
+					max_key_interval= mpeg_quant \
+					mod_quant lumi_mask hintedme \
+					hintfile debug keyframe_boost= \
+					kfthreshold= kfreduction=' -- $cur ) )
+			return 0
+			;;
+		-divx4opts)
+			COMPREPLY=( $( compgen -W 'br= key= deinterlace q= \
+					min_quant= max_quant= rc_period= \
+					rc_reaction_period= crispness= \
+					rc_reaction_ratio= pass= vbrpass= \
+					help' -- $cur ) )
+			return 0
+			;;
+		-info)
+			COMPREPLY=( $( compgen -W 'name= artist= genre= \
+					subject= copyright= srcform= \
+					comment= help' -- $cur ) )
+			return 0
+			;;
+		-lameopts)
+			COMPREPLY=( $( compgen -W 'vbr= abr cbr br= q= aq= \
+					ratio= vol= mode= padding= fast \
+					preset= help' -- $cur ) )
+			return 0
+			;;
+		-rawaudio)
+			COMPREPLY=( $( compgen -W 'on channels= rate= \
+					samplesize= format=' -- $cur ) )
+			return 0
+			;;
+		-rawvideo)
+			COMPREPLY=( $( compgen -W 'on fps= sqcif qcif cif \
+					4cif pal ntsc w= h= y420 yv12 yuy2 \
+					y8 format= size=' -- $cur ) )
+			return 0
+			;;
+		-aop)
+			COMPREPLY=( $( compgen -W 'list= delay= format= fout= \
+					volume= mul= softclip' -- $cur ) )
+			return 0
+			;;
+		-dxr2)
+			COMPREPLY=( $( compgen -W 'ar-mode= iec958-encoded \
+					iec958-decoded mute ucode= 75ire bw \
+					color interlaced macrovision= norm= \
+					square-pixel ccir601-pixel cr-left= \
+					cr-right= cr-top= cr-bot= ck-rmin= \
+					ck-gmin= ck-bmin= ck-rmax= ck-gmax= \
+					ck-bmax= ck-r= ck-g= ck-b= \
+					ignore-cache= ol-osd= olh-cor= \
+					olw-cor= olx-cor= oly-cor= overlay \
+					overlay-ratio= update-cache' -- $cur ))
+			return 0
+			;;
+		-tv)
+			COMPREPLY=( $( compgen -W 'on noaudio driver= device= \
+					input= freq= outfmt= width= height= \
+					buffersize= norm= channel= chanlist= \
+					audiorate= forceaudio alsa amode= \
+					forcechan= adevice= audioid= volume= \
+					bass= treble= balance= fps= \
+					channels= immediatemode=' -- $cur ) )
+			return 0
+			;;
+		-mf)
+			COMPREPLY=( $( compgen -W 'on w= h= fps= type=' \
+					-- $cur ) )
+			return 0
+			;;
+		-cdda)
+			COMPREPLY=( $( compgen -W 'speed= paranoia= \
+					generic-dev= sector-size= overlap= \
+					toc-bias toc-offset= skip noskip' \
+					-- $cur ) )
+			return 0
+			;;
+		-input)
+			COMPREPLY=( $( compgen -W 'conf= ar-delay ar-rate \
+					keylist cmdlist js-dev file' -- $cur ) )
+			return 0
+			;;
+		-af)
+			COMPREPLY=( $( compgen -W 'resample resample= \
+					channels channels= format format= \
+					volume volume= delay delay= pan \
+					pan= sub sub= surround surround=' \
+					-- $cur ) )
+			return 0
+			;;
+		-af-adv)
+			COMPREPLY=( $( compgen -W 'force= list=' -- $cur ) )
+			return 0
+			;;
+	esac
+
+	case "$cur" in
+		-*)
+			COMPREPLY=( $( compgen -W '-aid -alang -audio-demuxer \
+					-audiofile -cdrom-device -cache -cdda \
+					-channels -chapter -csslib -demuxer \
+					-dvd -dvd-device -dvdangle -dvdauth \
+					-dvdkey -dvdnav -forceidx -fps -frames \
+					-hr-mp3-seek -idx -mc -mf -ni -nobps \
+					-passwd -rawaudio -rtsp-stream-over-tcp\
+					-skipopening -sb -srate -ss -tv -user \
+					-vcd -vid -vivo -ifo -ffactor -font \
+					-noautosub -nooverlapsub -sid -slang \
+					-sub -subcc -subcp -sub-demuxer \
+					-subdelay -subfont-autoscale \
+					-subfont-blur -subfont-encoding \
+					-subfont-osd-scale -subfont-outline \
+					-subfont-text-scale -subfps -subfile \
+					-subpos -unicode -utf8 -vobsub \
+					-vobsubid -ac -afm -aspect -flip \
+					-lavdopts -noaspect -nosound -pp -ssf \
+					-stereo -sws -vc -vfm -vop -xvidopts\
+					-xy -zoom -bandwidth -cuefile \
+					-noextbased -rawvideo -overlapsub \
+					-sub-bg-alpha -sub-bg-color -subalign \
+					-subwidth -sub-no-text-pp -spualign \
+					-spuaa -spugauss -pphelp -verbose -v \
+					-noni -noidx -nohr-mp3-seek -extbased \
+					-bps -oldpp -nozoom -noflip -nounicode \
+					-noutf8' -- $cur ) )
+			# add mplayer specific options
+			[[ "$cmd" == @(?(g)mplayer) ]] && COMPREPLY=( "${COMPREPLY[@]}" \
+				$(compgen -W '-autoq -autosync -benchmark \
+					-framedrop -h -help -hardframedrop \
+					-identify -input -lircconf -loop \
+					-nojoystick -nolirc -nortc -playlist \
+					-quiet -really-quiet -rnd -sdp -skin \
+					-slave -softsleep -speed -sstep \
+					-use-stdin -dumpaudio -dumpfile \
+					-dumpstream -dumpvideo -dumpmicrodvdsub\
+					-dumpmpsub -dumpsrtsub -dumpjacosub \
+					-dumpsami -dumpsub -osdlevel -af \
+					-af-adv -ao -aofile -aop -delay -mixer \
+					-nowaveheader -bpp -brightness \
+					-contrast -display -double -dr -dxr2 \
+					-fb -fbmode -fbmodeconfig -forcexv -fs \
+					-geometry -hue -icelayer -jpeg \
+					-monitor-dotclock -monitor-hfreq \
+					-monitor-vfreq -monitoraspect \
+					-nograbpointer -noslices -panscan \
+					-rootwin -saturation -screenw -screenh \
+					-stop-xscreensaver -vm -vo -vsync -wid \
+					-xineramascreen -z -zrbw -zrcrop \
+					-zrdev -zrfd -zrhelp -zrnorm -zrquality \
+					-zrvdec -zrhdec -zrxdoff -zrydoff -y \
+					-edl -edlout -enqueue -fixed-vo \
+					-menu -menu-root -menu-cfg -shuffle \
+					-format -aahelp -dfbopts -fstype \
+					-guiwid -nokeepaspect -x --help \
+					-aaosdcolor -aasubcolor -aadriver \
+					-aaextended -aaeight' -- $cur) )
+			# add mencoder specific options
+			[[ "$cmd" = mencoder ]] && COMPREPLY=( "${COMPREPLY[@]}" \
+				$(compgen -W '-audio-density -audio-delay \
+					-audio-preload -divx4opts -endpos \
+					-ffourcc -include -info -lameopts \
+					-lavcopts -noskip -o -oac -ofps -ovc \
+					-passlogfile -skiplimit -vobsubout \
+					-vobsuboutindex -vobsuboutid \
+					-xvidencopts -of --verbose' -- $cur) )
+			;;
+		*)
+			_filedir '@(mp?(e)g|MP?(E)G|wm[av]|WM[AV]|avi|AVI|asf|ASF|vob|VOB|bin|BIN|dat|DAT|vcd|VCD|ps|PS|pes|PES|fli|FLI|flv|FLV|viv|VIV|rm?(j)|RM?(J)|ra?(m)|RA?(M)|yuv|YUV|mov|MOV|qt|QT|mp[34]|MP[34]|m4v|M4V|og[gm]|OG[GM]|wav|WAV|dump|DUMP|mk[av]|MK[AV]|m4a|M4A|aac|AAC|m2v|M2V|dv|DV|rmvb|RMVB|mid|MID|ts|TS|3gp|mpc|MPC|flac|FLAC|flv|FLV|divx|DIVX)'
+			;;
+	esac
+
+	return 0
+}
+complete $filenames -F _mplayer mplayer mencoder gmplayer kplayer
+}
+
+# KDE dcop completion
+#
+have dcop &&
+_dcop()
+{
+	local cur compstr
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	if [ -z $cur ]; then
+	    compstr=${COMP_WORDS[*]}
+	else
+	    compstr=$( command echo ${COMP_WORDS[*]} | sed "s/ $cur$//" )
+	fi
+	COMPREPLY=( $( compgen -W '$( command $compstr | sed s/\(.*\)// )'  -- $cur ) )
+} &&
+complete -F _dcop dcop
+
+# wvdial(1) completion
+#
+have wvdial &&
+_wvdial()
+{
+	local cur prev config i IFS=$'\t\n'
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case $prev in
+		--config)
+			_filedir
+			return 0
+			;;
+	esac
+
+	case $cur in
+		-*)
+			COMPREPLY=( $( compgen -W '--config --chat \
+				--remotename --help --version --no-syslog' \
+				-- $cur ) )
+			;;
+		*)
+			# start with global and personal config files
+		       	config="/etc/wvdial.conf"$'\t'"$HOME/.wvdialrc"
+			# replace with command line config file if present
+			for (( i=1; i < COMP_CWORD; i++ )); do
+				if [[ "${COMP_WORDS[i]}" == "--config" ]]; then
+					config=${COMP_WORDS[i+1]}
+					break
+				fi
+			done
+			# parse config files for sections and
+			# remove default section
+			COMPREPLY=( $( sed -ne \
+				    "s|^\[Dialer \($cur.*\)\]$|\1|p" \
+				    $config 2>/dev/null |grep -v '^Defaults$'))
+			# escape spaces
+			COMPREPLY=${COMPREPLY// /\\ }
+			;;
+	esac
+
+} &&
+complete -F _wvdial wvdial
+
+# gpg(1) completion
+#
+have gpg &&
+_gpg() 
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+	-@(s|-sign|-clearsign|-decrypt-files|-load-extension)) 
+		_filedir
+		return 0
+		;;
+	--@(export|@(?(l|nr|nrl)sign|edit)-key)) 
+		# return list of public keys
+		COMPREPLY=( $( compgen -W "$( gpg --list-keys 2>/dev/null | sed -ne 's@^pub.*/\([^ ]*\).*\(<\([^>]*\)>\).*$@\1 \3@p')" -- "$cur" ))
+		return 0
+		;;
+	-@(r|-recipient))
+		COMPREPLY=( $( compgen -W "$( gpg --list-keys 2>/dev/null | sed -ne 's@^pub.*<\([^>]*\)>.*$@\1@p')" -- "$cur" ))
+		if [ -e ~/.gnupg/gpg.conf ]; then
+			COMPREPLY=( "${COMPREPLY[@]}" $( compgen -W "$( sed -ne 's@^[ \t]*group[ \t][ \t]*\([^=]*\).*$@\1@p' ~/.gnupg/gpg.conf  )" -- "$cur") )
+		fi
+		return 0
+		;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-s -b -e -f -c -d -a -r -u -Z -o -v\
+				-q -n -N $(gpg --dump-options)' -- $cur ) )
+	 fi
+
+} &&
+complete -F _gpg $default gpg
+
+# iconv(1) completion
+#
+have iconv &&
+_iconv()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-@(f|t|-@(from|to)-code))
+			COMPREPLY=( $( compgen -W \
+			    '$( iconv --list | sed -e "s@//@@;" )' -- "$cur" ) )
+			return 0
+			;;
+	esac
+
+
+	if [[ "$cur" = -* ]]; then
+		COMPREPLY=( $( compgen -W '--from-code -f --to-code -t --list
+		--output -o --verbose' -- "$cur" ) )
+		return 0
+	fi
+} &&
+complete -F _iconv $default iconv
+
+# dict(1) completion
+#
+{ have dict || have rdict; } && {
+_dictdata()
+{
+	dict $host $port $1 2>/dev/null | sed -ne \
+	    's/^['$'\t '']['$'\t '']*\([^'$'\t '']*\).*$/\1/p'
+}
+
+_dict()
+{
+	local cur prev host port db dictfile
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+	dictfile=/usr/share/dict/words
+
+	for (( i=1; i < COMP_CWORD; i++ )); do
+		case "${COMP_WORDS[i]}" in
+		-@(h|--host))
+			host=${COMP_WORDS[i+1]}
+			[ -n "$host" ] && host="-h $host"
+			i=$((++i))
+			;;
+		-@(p|-port))
+			port=${COMP_WORDS[i+1]}
+			[ -n "$port" ] && port="-p $port"
+			i=$((++i))
+			;;
+		-@(d|-database))
+			db=${COMP_WORDS[i+1]}
+			[ -n "$db" ] && host="-d $db"
+			i=$((++i))
+			;;
+		*)
+			;;
+		esac
+	done
+
+	if [[ "$cur" = -* ]]; then
+		COMPREPLY=( $( compgen -W '-h --host -p --port -d --database \
+			       -m --match -s --strategy -c --config -C \
+			       --nocorrect -D --dbs -S --strats -H \
+			       --serverhelp -i --info -I --serverinfo \
+			       -a --noauth -u --user -k --key -V --version \
+			       -L --license --help -v --verbose -r --raw \
+			       -P --pager --debug --html --pipesize --client' \
+			       -- "$cur" ) )
+		return 0
+	fi
+
+	case "$prev" in
+	-@(d|-database|i|info))
+		COMPREPLY=( $( compgen -W '$( _dictdata -D )' -- "$cur" ) )
+		return 0
+		;;
+	-@(s|-strategy))
+		COMPREPLY=( $( compgen -W '$( _dictdata -S )' -- "$cur" ) )
+		return 0
+		;;
+	*)
+		;;
+	esac
+
+	[ -r $dictfile ] && \
+		COMPREPLY=( $( compgen -W '$( cat $dictfile )' -- "$cur" ) )
+}
+complete -F _dict $default dict rdict
+}
+
+# cdrecord(1) completion
+#
+have cdrecord &&
+_cdrecord()
+{
+	local cur prev i generic_options track_options track_mode
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	# foo=bar style option
+	if [[ "$cur" == *=* ]]; then
+		prev=${cur/=*/}
+		cur=${cur/*=/}
+		case "$prev" in
+			@(text|cue)file)
+				_filedir
+				return 0
+				;;
+			blank)
+				COMPREPLY=( $( compgen -W 'help all fast \
+				track unreserve trtail unclose session' \
+				-- $cur ) )
+				return 0
+				;;
+			driveropts)
+				COMPREPLY=( $( compgen -W 'burnfree noburnfree\
+				  varirec= audiomaster forcespeed noforcespeed\
+				  speedread nospeedread singlesession \
+				  nosinglesession hidecdr nohidecdr tattooinfo\
+				  tattoofile=' -- $cur ) )
+				return 0
+				;;
+		esac
+	fi
+
+	generic_options=(-version -v -V -d -silent -s -force -immed -dummy \
+			 -dao -raw -raw96r -raw96p -raw16 -multi -msinfo -toc \
+			 -atip -fix -nofix -waiti -load -lock -eject -format \
+			 -setdropts -checkdrive -prcap -inq -scanbus -reset \
+			 -abort -overburn -ignsize -useinfo -packet -noclose \
+			 -text debug= kdebug= kd= minbuf= speed= blank= fs= \
+			 dev= gracetime= timeout= driver= driveropts= \
+			 defpregap= pktsize= mcn= textfile= cuefile=)
+	track_options=(-audio -swab -data -mode2 -xa -xa1 -xa2 -xamix -cdi \
+		       -isosize -pad padsize= -nopad -shorttrack -noshorttrack\
+		       pregap= -preemp -nopreemp -copy -nocopy -scms tcsize= \
+		       isrc= index=)
+	# look if previous was either a file or a track option
+	track_mode=0
+	if [ $COMP_CWORD -gt 1 ]; then
+		if [ -f "$prev" ]; then
+			track_mode=1
+		else
+			for (( i=0; i < ${#track_options[@]}; i++ )); do
+				if [[ "${track_options[i]}" == "$prev" ]]; then
+					track_mode=1
+					break
+				fi
+			done
+		fi
+	fi
+
+	# files are always eligible completion
+	_filedir
+	# track options are always available
+	COMPREPLY=( "${COMPREPLY[@]}" $( compgen -W '${track_options[@]}' -- $cur ) )
+	# general options are no more available after file or track option
+	if [ $track_mode -eq 0 ]; then
+		COMPREPLY=( "${COMPREPLY[@]}" \
+			    $( compgen -W '${generic_options[@]}' -- $cur ) )
+	fi
+
+} &&
+complete -F _cdrecord $filenames cdrecord
+
+# mkisofs(8) completion
+#
+have mkisofs &&
+_mkisofs()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-@(o|abstract|biblio|check-session|copyright|log-file|root-info|prep-boot|*-list))
+			_filedir
+			return 0
+			;;
+		-*-charset)
+			COMPREPLY=( $( mkisofs -input-charset help 2>&1 | \
+					tail +3 | grep "^$cur") )
+			return 0
+			;;
+		-uid)
+			_uids
+			return 0
+			;;
+		-gid)
+			_gids
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-abstract -A -allow-lowercase \
+				-allow-multidot -biblio -cache-inodes \
+				-no-cache-inodes -b -eltorito-alt-boot -B -G \
+				-hard-disk-boot -no-emul-boot -no-boot \
+				-boot-load-seg -boot-load-size \
+				-boot-info-table -C -c -check-oldname \
+				-check-session -copyright -d -D -dir-mode \
+				-dvd-video -f -file-mode -gid -gui \
+				-graft-points -hide -hide-list -hidden \
+				-hidden-list -hide-joliet -hide-joliet-list \
+				-hide-joliet-trans-tbl -hide-rr-moved \
+				-input-charset -output-charset -iso-level -J \
+				-joliet-long -jcharset -l -L -log-file -m \
+				-exclude-list -max-iso9660-filenames -M -N \
+				-new-dir-mode -nobak -no-bak -force-rr -no-rr \
+				-no-split-symlink-components \
+				-no-split-symlink-fields -o -pad -no-pad \
+				-path-list -P -p -print-size -quiet -R -r \
+				-relaxed-filenames -sort -split-output \
+				-stream-media-size -stream-file-name -sysid -T\
+				-table-name -ucs-level -udf -uid \
+				-use-fileversion -U -no-iso-translate -V \
+				-volset -volset-size -volset-seqno -v -x -z \
+				-hfs -apple -map -magic -hfs-creator \
+				-hfs-type -probe -no-desktop -mac-name \
+				-boot-hfs-file -part -auto -cluster-size \
+				-hide-hfs -hide-hfs-list -hfs-volid \
+				-icon-position -root-info -prep-boot \
+				-input-hfs-charset -output-hfs-charset \
+				-hfs-unlock -hfs-bless -hfs-parms --cap \
+				--netatalk --double --ethershare --ushare \
+				--exchange --sgi --xinet --macbin --single \
+				--dave --sfm --osx-double --osx-hfs' -- $cur ))
+	else
+		_filedir
+	fi
+
+} &&
+complete -F _mkisofs $filenames mkisofs
+
+# mc(1) completion
+#
+have mc &&
+_mc()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	# -name value style option
+	case "$prev" in
+		-@(e|v|l|P))
+			_filedir
+			return 0
+			;;
+	esac
+
+	# --name=value style option
+	if [[ "$cur" == *=* ]]; then
+		prev=${cur/=*/}
+		cur=${cur/*=/}
+		case "$prev" in
+			--@(edit|view|ftplog|printwd))
+				_filedir
+				return 0
+				;;
+		esac
+	fi
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-a --stickchars -b --nocolor -c \
+			--color -C --colors= -d --nomouse -e --edit= -f \
+			--datadir -k --resetsoft -l --ftplog= -P --printwd= \
+			-s --slow -t --termcap -u --nosubshell -U --subshell \
+			-v --view= -V --version -x --xterm -h --help' -- $cur ) )
+	else
+		_filedir -d
+	fi
+} &&
+complete -F _mc $filenames mc
+
+# yum(8) completion
+#
+have yum && {
+_yum()
+{
+	local cur prev special
+	
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	for (( i=0; i < ${#COMP_WORDS[@]}-1; i++ )); do
+		if [[ ${COMP_WORDS[i]} == @(install|update|upgrade|remove|erase|deplist) ]]; then
+			special=${COMP_WORDS[i]}
+		fi
+	done
+
+	if [ -n "$special" ]; then
+	    case $special in
+		install|deplist)
+		    COMPREPLY=( $( compgen -W '$( yum -C list | cut -d" " -f1 )' -- $cur ) )
+		    return 0
+		    ;;
+		*)
+		    _rpm_installed_packages
+		    return 0
+		    ;;
+		esac
+	fi
+
+	case $cur in
+	    --*)
+		COMPREPLY=( $( compgen -W '--installroot --version --help --enablerepo --disablerepo --exclude --obsoletes --noplugins' -- $cur ) )
+		return 0
+		;;
+	    -*)
+		COMPREPLY=( $( compgen -W '-c -e -d -y -t -R -C -h' -- $cur ) )
+		return 0
+		;;
+	esac
+
+	case $prev in
+	    list)
+		COMPREPLY=( $( compgen -W 'all available updates installed extras obsoletes recent' -- $cur ) )
+		;;
+	    clean)
+		COMPREPLY=( $( compgen -W 'packages headers metadata cache dbcache all' -- $cur ) )
+		;;
+	    localinstall)
+		_filedir rpm
+		;;
+	    -c)
+		_filedir
+		;;
+	    --installroot)
+		_filedir -d
+		;;
+	    *)
+		COMPREPLY=( $( compgen -W 'install update check-update upgrade remove list \
+						search info provides clean groupinstall groupupdate \
+						grouplist deplist erase groupinfo groupremove \
+						localinstall localupdate makecache resolvedep \
+						shell whatprovides' -- $cur ) )
+		;;
+	esac
+}
+complete -F _yum $filenames yum
+
+# yum-arch(8) completion
+#
+_yum_arch()
+{
+    local cur
+    COMPREPLY=()
+    cur=`_get_cword`
+
+    case "$cur" in
+	-*)
+	    COMPREPLY=( $( compgen -W '-d -v -vv -n -c -z -s -l -q' -- $cur ) )
+	    ;;
+	*)
+	    _filedir -d
+	    ;;
+    esac
+
+    return 0
+
+}
+complete -F _yum_arch $filenames yum-arch
+}
+
+# ImageMagick completion
+#
+have convert && {
+_ImageMagick()
+{
+	local prev
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-channel)
+			COMPREPLY=( $( compgen -W 'Red Green Blue Opacity \
+				Matte Cyan Magenta Yellow Black' -- $cur ) )
+			return 0
+			;;
+		-colormap)
+			COMPREPLY=( $( compgen -W 'shared private' -- $cur ) )
+			return 0
+			;;
+		-colorspace)
+			COMPREPLY=( $( compgen -W 'GRAY OHTA RGB Transparent \
+				XYZ YCbCr YIQ YPbPr YUV CMYK' -- $cur ) )
+			return 0
+			;;
+		-compose)
+			COMPREPLY=( $( compgen -W 'Over In Out Atop Xor Plus \
+				Minus Add Subtract Difference Multiply Bumpmap\
+				Copy CopyRed CopyGreen CopyBlue CopyOpacity' \
+				-- $cur ) )
+			return 0
+			;;
+		-compress)
+			COMPREPLY=( $( compgen -W 'None BZip Fax Group4 JPEG \
+				Lossless LZW RLE Zip' -- $cur ) )
+			return 0
+			;;
+		-dispose)
+			COMPREPLY=( $( compgen -W 'Undefined None Background \
+						    Previous' -- $cur ) )
+			return 0
+			;;
+		-encoding)
+			COMPREPLY=( $( compgen -W 'AdobeCustom AdobeExpert \
+				AdobeStandard AppleRoman BIG5 GB2312 Latin2 \
+				None SJIScode Symbol Unicode Wansung' -- $cur))
+			return 0
+			;;
+		-endian)
+			COMPREPLY=( $( compgen -W 'MSB LSB' -- $cur ) )
+			return 0
+			;;
+		-filter)
+			COMPREPLY=( $( compgen -W 'Point Box Triangle Hermite \
+				Hanning Hamming Blackman Gaussian Quadratic \
+				Cubic Catrom Mitchell Lanczos Bessel Sinc' \
+				-- $cur ) )
+			return 0
+			;;
+		-format)
+			COMPREPLY=( $( convert -list format | \
+				    awk '/ [r-][w-][+-] / {print $1}' | \
+				    tr -d '*' | tr [:upper:] [:lower:] | \
+				    grep "^$cur" ) )
+			return 0
+			;;
+		-gravity)
+			COMPREPLY=( $( compgen -W 'Northwest North NorthEast \
+				West Center East SouthWest South SouthEast' \
+				-- $cur ) )
+			return 0
+			;;
+		-intent)
+			COMPREPLY=( $( compgen -W 'Absolute Perceptual \
+					Relative Saturation' -- $cur ) )
+			return 0
+			;;
+		-interlace)
+			COMPREPLY=( $( compgen -W 'None Line Plane Partition' \
+					-- $cur ) )
+			return 0
+			;;
+		-limit)
+			COMPREPLY=( $( compgen -W 'Disk File Map Memory' \
+					-- $cur ) )
+			return 0
+			;;
+		-list)
+			COMPREPLY=( $( compgen -W 'Delegate Format Magic \
+					Module Resource Type' -- $cur ) )
+			return 0
+			;;
+		-map)
+			COMPREPLY=( $( compgen -W 'best default gray red \
+					green blue' -- $cur ) )
+			_filedir
+			return 0
+			;;
+		-noise)
+			COMPREPLY=( $( compgen -W 'Uniform Gaussian \
+					Multiplicative \
+				Impulse Laplacian Poisson' -- $cur ) )
+			return 0
+			;;
+		-preview)
+			COMPREPLY=( $( compgen -W 'Rotate Shear Roll Hue \
+					Saturation Brightness Gamma Spiff \
+					Dull Grayscale Quantize Despeckle \
+					ReduceNoise AddNoise Sharpen Blur \
+					Treshold EdgeDetect Spread Shade \
+					Raise Segment Solarize Swirl Implode \
+					Wave OilPaint CharcoalDrawing JPEG' \
+					-- $cur ) )
+			return 0
+			;;
+		-@(mask|profile|texture|tile|write))
+			_filedir
+			return 0
+			;;
+		-type)
+			COMPREPLY=( $( compgen -W 'Bilevel Grayscale Palette \
+					PaletteMatte TrueColor TrueColorMatte \
+					ColorSeparation ColorSeparationlMatte \
+					Optimize' -- $cur ) )
+			return 0
+			;;
+		-units)
+			COMPREPLY=( $( compgen -W 'Undefined PixelsPerInch \
+					PixelsPerCentimeter' -- $cur ) )
+			return 0
+			;;
+		-virtual-pixel)
+			COMPREPLY=( $( compgen -W 'Constant Edge mirror tile' \
+					-- $cur ) )
+			return 0
+			;;
+		-visual)
+			COMPREPLY=( $( compgen -W 'StaticGray GrayScale \
+					StaticColor PseudoColor TrueColor \
+					DirectColor defaut visualid' -- $cur ))
+			return 0
+			;;
+	esac
+}
+
+_convert()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	_ImageMagick
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-adjoin -affine -antialias -append \
+			-authenticate -average -background -black-threshold \
+			-blue-primary -blur -border -bordercolor -channel \
+			-charcoal -chop -clip -coalesce -colorize -colors \
+			-colorspace -comment -compress -contrast -convolve \
+			-crop -cycle -debug -deconstruct -delay -density \
+			-depth -despeckle -display -dispose -dither -draw \
+			-edge -emboss -encoding -endian -enhance -equalize \
+			-extract -fill -filter -flatten -flip -flop -font \
+			-frame -fuzz -gamma -gaussian -geometry \
+			-green-primary -gravity -help -implode -intent \
+			-interlace -label -lat -level -limit -list -log -loop \
+			-map -mask -matte -median -modulate -monochrome \
+			-morph -mosaic -negate -noop -noise -normalize \
+			-opaque -ordered-dither -page -paint -ping -pointsize \
+			-preview -profile -quality -raise -random-threshold \
+			-region -raise -red-primary -render -resize -resample \
+			-roll -rotate -sample -sampling-factor -scale -scene \
+			-seed -segment -shade -sharpen -shave -shear -size \
+			-solarize -spread -stroke -strokewidth -swirl \
+			-texture -threshold -thumbnail -tile -transform \
+			-transparent -treedepth -trim -type -undercolor \
+			-units -unsharp -verbose -version -view \
+			-virtual-pixel -wave -white-point -white-threshold \
+			-write' -- $cur ) )
+	elif [[ "$cur" == +* ]]; then
+		COMPREPLY=( $( compgen -W '+adjoin +append +compress \
+			+contrast +debug +dither +endian +gamma +label +map \
+			+mask +matte +negate +noise +page +raise +render \
+			+write' -- $cur ) ) 
+	else
+		_filedir
+	fi
+}
+complete -F _convert $filenames convert
+
+_mogrify()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	_ImageMagick
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-affine -antialias -authenticate \
+			-background -black-threshold -blue-primary -blur \
+			-border -bordercolor -channel -charcoal -chop \
+			-colorize -colors -colorspace -comment -compress \
+			-contrast -convolve -crop -cycle -debug -delay \
+			-density -depth -despeckle -display -dispose -dither \
+			-draw -edge -emboss -encoding -endian -enhance \
+			-equalize -extract -fill -filter -flip -flop -font \
+			-format -frame -fuzz -gamma -gaussian -geometry \
+			-green-primary -implode -interlace -help -label -lat \
+			-level -limit -list -log -loop -map -mask -matte \
+			-median -modulate -monochrome -negate -noop \
+			-normalize -opaque -page -paint -fill -ordered-dither \
+			-pointsize -profile -quality -raise -random-threshold \
+			-red-primary -region -resample -resize -roll -rotate \
+			-sample -sampling-factor -scale -scene -seed -segment \
+			-shade -sharpen -shear -size -solarize -spread \
+			-stroke -strokewidth -swirl -texture -threshold \
+			-thumbnail -tile -transform -transparent -treedepth \
+			-trim -type -undercolor -units -unsharp -verbose \
+			-version -view -virtual-pixel -wave -white-point \
+			-white-threshold' -- $cur ) )
+	elif [[ "$cur" == +* ]]; then
+		COMPREPLY=( $( compgen -W '+compress +contrast +debug +dither \
+			+endian +gamma +label +map +mask +matte +negate +page \
+			+raise' -- $cur ) ) 
+	else
+		_filedir
+	fi
+}
+complete -F _mogrify $filenames mogrify
+
+_display()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	_ImageMagick
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-authenticate -backdrop -border \
+			-colormap -colors -colorspace -comment -compress \
+			-contrast -crop -debug -delay -density -depth \
+			-despeckle -display -dispose -dither -edge -endian \
+			-enhance -extract -filter -flip -flop -frame -gamma \
+			-geometry -help -immutable -interlace -label -limit \
+			-log -map -matte -monochrome -negate -noop -page \
+			-quality -raise -remote -roll -rotate -sample \
+			-sampling-factor -scene -segment -sharpen -size \
+			-texture -treedepth -trim -update -verbose -version \
+			-virtual-pixel -window -window_group -write' -- $cur))
+	elif [[ "$cur" == +* ]]; then
+		COMPREPLY=( $( compgen -W '+compress +contrast +debug +dither \
+			+endian +gamma +label +map +matte +negate +page \
+			+raise +write' -- $cur ) ) 
+	else
+		_filedir
+	fi
+}
+complete -F _display $filenames display
+
+_animate()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	_ImageMagick
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-authenticate -backdrop -colormap \
+			-colors -colorspace -crop -debug -delay -density \
+			-depth -display -dither -extract -gamma -geometry \
+			-help -interlace -limit -log -matte -map -monochrome \
+			-noop -pause -remote -rotate -sampling-factor -scene \
+			-size -treedepth -trim -verbose -version -visual \
+			-virtual-pixel -window' -- $cur ) )
+	elif [[ "$cur" == +* ]]; then
+		COMPREPLY=( $( compgen -W '+debug +dither +gamma +map +matte' -- $cur ) ) 
+	else
+		_filedir
+	fi
+}
+complete -F _animate $filenames animate
+
+_identify()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	_ImageMagick
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-authenticate -debug -density \
+			-depth -extract -format -help -interlace -limit -list \
+			-log -size -sampling-factor -verbose -version \
+			-virtual-pixel' -- $cur ) )
+	elif [[ "$cur" == +* ]]; then
+		COMPREPLY=( $( compgen -W '+debug ' -- $cur ) ) 
+	else
+		_filedir
+	fi
+}
+complete -F _identify $filenames identify
+
+_montage()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	_ImageMagick
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-adjoin -affine -authenticate \
+			-blue-primary -blur -colors -colorspace -comment \
+			-compose -compress -crop -debug -density -depth \
+			-display -dispose -dither -draw -encoding -endian \
+			-extract -fill -filter -flip -flop -frame -gamma \
+			-geometry -gravity -green-primary -interlace -help \
+			-label -limit -log -matte -mode -monochrome -noop \
+			-page -pointsize -quality -red-primary -resize \
+			-rotate -sampling-factor -scene -shadow -size \
+			-stroke -texture -thumbnail -tile -transform \
+			-transparent -treedepth -trim -type -verbose \
+			-version -virtual-pixel -white-point' -- $cur ) )
+	elif [[ "$cur" == +* ]]; then
+		COMPREPLY=( $( compgen -W '+adjoin +compress +debug +dither \
+			+endian +gamma +label +matte +page' -- $cur ) ) 
+	else
+		_filedir
+	fi
+}
+complete -F _montage $filenames montage
+
+_composite()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	_ImageMagick
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-affine -authenticate \
+			-blue-primary -colors -colorspace -comment -compose \
+			-compress -debug -density -depth -displace -display \
+			-dispose -dissolve -dither -encoding -endian -extract \
+			-filter -font -geometry -gravity -green-primary -help \
+			-interlace -label -limit -log -matte -monochrome \
+			-negate -page -profile -quality -red-primary -rotate \
+			-resize -sampling-factor -scene -sharpen -size \
+			-stegano -stereo -thumbnail -tile -transform \
+			-treedepth -type -units -unsharp -verbose -version \
+			-virtual-pixel -watermark -white-point -write' \
+			-- $cur ) )
+	elif [[ "$cur" == +* ]]; then
+		COMPREPLY=( $( compgen -W '+compress +debug +dither +endian +label \
+			+matte +negate +page +write' -- $cur ) ) 
+	else
+		_filedir
+	fi
+}
+complete -F _composite $filenames composite
+}
+
+# dd(1) completion
+#
+have dd &&
+_dd()
+{
+	 local cur
+
+	 COMPREPLY=()
+	cur=`_get_cword`
+
+	 case "$cur" in
+	 if=*|of=*)
+		 cur=${cur#*=}
+		 _filedir
+		 return 0
+		 ;;
+	 conv=*)
+		 cur=${cur#*=}
+		 COMPREPLY=( $( compgen -W 'ascii ebcdic ibm block unblock \
+				lcase notrunc ucase swab noerror sync' \
+				-- $cur ) )
+		 return 0
+		 ;;
+	 esac
+
+	 _expand || return 0
+
+	 COMPREPLY=( $( compgen -W '--help --version' -- $cur ) \
+		     $( compgen -W 'bs cbs conv count ibs if obs of seek skip'\
+				-S '=' -- $cur ) )
+} &&
+complete -F _dd $nospace $filenames dd
+
+# CUPS cancel(1) completion
+#
+have cancel &&
+_cancel()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	COMPREPLY=( $( lpstat | cut -d' ' -f1 | grep "^$cur" ) )
+} &&
+complete -F _cancel $filenames cancel
+
+# aspell(1) completion
+#
+have aspell && {
+_aspell_dictionary()
+{
+	local datadir
+	datadir=/usr/lib/aspell
+	COMPREPLY=( $( command ls $datadir/*.@(multi|alias) ) )
+	COMPREPLY=( ${COMPREPLY[@]%.@(multi|alias)} )
+	COMPREPLY=( $( compgen -W '${COMPREPLY[@]#$datadir/}' -- $cur ) )
+}
+
+_aspell()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	# --name value style option
+	case "$prev" in
+		@(-c|-p|check))
+			_filedir
+			return 0
+			;;
+		@(dump|create|merge))
+			COMPREPLY=( $( compgen -W 'master personal repl' -- $cur ) )
+			return 0
+			;;
+		-d)
+			_aspell_dictionary
+			return 0
+			;;
+	esac
+
+	# --name=value style option
+	if [[ "$cur" == *=* ]]; then
+		prev=${cur/=*/}
+		cur=${cur/*=/}
+		case "$prev" in
+			--@(conf|personal|repl|per-conf))
+				_filedir
+				return 0
+				;;
+			--@(conf-dir|data-dir|dict-dir|home-dir|local-data-dir|prefix))
+				_filedir -d
+				return 0
+				;;
+			--master)
+				_aspell_dictionary
+				return 0
+				;;
+			--mode)
+				COMPREPLY=( $( compgen -W 'none url email sgml tex' -- $cur ) )
+				return 0
+				;; 
+			--sug-mode)
+				COMPREPLY=( $( compgen -W 'ultra fast normal bad-speller' -- $cur ) )
+				return 0
+				;;
+			--keymapping)
+				COMPREPLY=( $( compgen -W 'aspell ispell' -- $cur ) )
+				return 0
+				;;
+		esac
+	fi
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '--conf= --conf-dir= --data-dir= --dict-dir= \
+			--encoding= --add-filter= --rem-filter= --mode= -e \
+			-H -t --add-extra-dicts= --rem-extra-dicts= \
+			--home-dir= -W --ignore= --ignore-accents \
+			--dont-ignore-accents --ignore-case --dont-ignore-case \
+			--ignore-repl --dont-ignore-repl --jargon= --keyboard= \
+			--lang= --language-tag= --local-data-dir= -d --master= \
+			--module= --add-module-search-order= \
+			--rem-module-search-order= --per-conf= -p --personal= \
+			--prefix= --repl= -C -B --run-together --dont-run-together \
+			--run-together-limit= --run-together-min= --save-repl \
+			--dont-save-repl --set-prefix --dont-set-prefix --size= \
+			--spelling= --strip-accents --dont-strip-accents \
+			--sug-mode= --add-word-list-path= --rem-word-list-path= \
+			-b -x --backup -b|-x --dont-backup --reverse --dont-reverse \
+			--time --dont-time --keymapping= --add-email-quote= \
+			--rem-email-quote= --email-margin= --add-tex-command= \
+			--rem-tex-command= --tex-check-comments \
+			--dont-tex-check-comments --add-tex-extension= \
+			--rem-tex-extension= --add-sgml-check= --rem-sgml-check= \
+			--add-sgml-extension= --rem-sgml-extension=' -- $cur ) )
+	else
+		COMPREPLY=( $( compgen -W '-? help -c check -a pipe -l list \
+			config config soundslike filter -v version dump \
+			create merge' -- $cur ) )
+	fi
+
+}
+complete -F _aspell $filenames aspell
+}
+
+# xmms(1) completion
+#
+have xmms &&
+_xmms()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-h --help -r --rew -p --play \
+			-u --pause -s --stop -t --play-pause -f --fwd -e \
+			--enqueue -m --show-main-window -i --sm-client-id \
+			-v --version' -- $cur ) )
+	else
+		_filedir '@(mp[23]|MP[23]|ogg|OGG|wav|WAV|pls|m3u|xm|mod|s[3t]m|it|mtm|ult|flac)'
+
+	fi
+
+} &&
+complete -F _xmms $filenames xmms
+
+# info(1) completion
+#
+have info &&
+_info()
+{
+	local cur infopath UNAME
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	_expand || return 0
+
+	# default completion if parameter contains /
+	if [[ "$cur" == */* ]]; then
+		_filedir
+		return 0
+	fi
+
+	infopath='/usr/share/info'
+
+	if [ "${INFOPATH: -1:1}" == ':' ]; then
+		infopath=${INFOPATH}${infopath}
+	elif [ ${INFOPATH:+set} ]; then
+		infopath=$INFOPATH
+	fi
+
+	infopath=$infopath:
+	if [ -n "$cur" ]; then
+		infopath="${infopath//://$cur* }"
+	else
+		infopath="${infopath//:// }"
+	fi
+
+	# redirect stderr for when path doesn't exist
+	COMPREPLY=( $( eval command ls "$infopath" 2>/dev/null ) )
+	# weed out directory path names and paths to info pages
+	COMPREPLY=( ${COMPREPLY[@]##*/?(:)} )
+	# weed out info dir file
+	for (( i=0 ; i < ${#COMPREPLY[@]} ; ++i )); do
+		if [ "${COMPREPLY[$i]}" == 'dir' ]; then
+			unset COMPREPLY[$i];
+		fi;
+	done  
+	# strip suffix from info pages
+	COMPREPLY=( ${COMPREPLY[@]%.@(gz|bz2)} )
+	COMPREPLY=( $( compgen -W '${COMPREPLY[@]%.*}' -- "${cur//\\\\/}" ) )
+
+	return 0
+} &&
+complete -F _info $filenames info
+
+# dhclient(1) completion
+#
+have dhclient && _dhclient()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-@(cf|lf|pf|sf))
+			_filedir
+			return 0
+			;;
+		-s)
+			_known_hosts
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-p -d -q -1 -r -lf -pf \
+			-cf -sf -s -g -n -nw -w' -- $cur ) )
+	else
+		_available_interfaces
+	fi
+} &&
+complete -F _dhclient dhclient
+
+# lvm(8) completion
+#
+have lvm && {
+_volumegroups()
+{
+	COMPREPLY=( $(compgen -W "$( vgscan 2>/dev/null | \
+	    sed -n -e 's|.*Found.*"\(.*\)".*$|\1|p' )" -- $cur ) )
+}
+
+_physicalvolumes()
+{
+	COMPREPLY=( $(compgen -W "$( pvscan 2>/dev/null | \
+	    sed -n -e 's|^.*PV \(.*\) VG.*$|\1|p' )" -- $cur ) )
+}
+
+_logicalvolumes()
+{
+	COMPREPLY=( $(compgen -W "$( lvscan 2>/dev/null | \
+	    sed -n -e "s|^.*'\(.*\)'.*$|\1|p" )" -- $cur ) )
+}
+
+_units()
+{
+	COMPREPLY=( $( compgen -W 'h s b k m g t H K M G T' -- $cur ) )
+}
+
+_sizes()
+{
+	COMPREPLY=( $( compgen -W 'k K m M g G t T' -- $cur ) )
+}
+
+_args()
+{
+	args=0
+	if [[ "${COMP_WORDS[0]}" == lvm ]]; then
+		offset=2
+	else
+		offset=1
+	fi
+	for (( i=$offset; i < COMP_CWORD; i++ )); do
+		if [[ "${COMP_WORDS[i]}" != -* ]]; then
+			args=$(($args + 1))
+		fi
+	done
+}
+
+_lvmdiskscan()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-d --debug -h -? --help -l \
+			--lvmpartition -v --verbose --version' -- $cur ) )
+	fi
+}
+complete -F _lvmdiskscan lvmdiskscan
+
+_pvscan()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-d --debug -e \
+			--exported -n --novolumegroup -h -? \
+			--help --ignorelockingfailure -P \
+			--partial -s --short -u --uuid -v \
+			--verbose --version' -- $cur ) )
+	fi
+}
+complete -F _pvscan pvscan
+
+_pvs()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-@(o|O|-options|-sort))
+			COMPREPLY=( $( compgen -W 'pv_fmt pv_uuid \
+				pv_size pv_free pv_used pv_name \
+				pv_attr pv_pe_count \
+				pv_pe_alloc_count' -- $cur ) )
+			return 0
+			;;
+		--units)
+			_units
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '--aligned -a --all -d --debug \
+			-h -? --help --ignorelockingfailure --noheadings \
+			--nosuffix -o --options -O --sort \
+			--separator --unbuffered --units \
+			-v --verbose --version' -- $cur ) )
+	else
+		_physicalvolumes
+	fi
+}
+complete -F _pvs pvs
+
+_pvdisplay()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		--units)
+			_units
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-c --colon -C --columns --units \
+			-v --verbose -d --debug -h --help --version' -- $cur ) )
+	else
+		_physicalvolumes
+	fi
+}
+complete -F _pvdisplay pvdisplay
+
+_pvchange()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-@(A|x|-autobackup|--allocatable))
+			COMPREPLY=( $( compgen -W 'y n' -- $cur ) )
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-a --all -A --autobackup \
+			-d --debug -h --help -t --test -u --uuid -x \
+			--allocatable -v --verbose --addtag --deltag \
+			--version' -- $cur ) )
+	else
+		_physicalvolumes
+	fi
+}
+complete -F _pvchange pvchange
+
+_pvcreate()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		--restorefile)
+			_filedir
+			return 0
+			;;
+		-@(M|-metadatatype))
+			COMPREPLY=( $( compgen -W '1 2' -- $cur ) )
+			return 0
+			;;
+		--metadatacopies)
+			COMPREPLY=( $( compgen -W '0 1 2' -- $cur ) )
+			return 0
+			;;
+		--@(metadatasize|setphysicalvolumesize))
+			_sizes
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '--restorefile -d --debug -f \
+			--force -h -? --help --labelsector -M --metadatatype \
+			--metadatacopies --metadatasize \
+			--setphysicalvolumesize -t --test -u --uuid uuid -v \
+			--verbose -y --yes --version' -- $cur ) )
+	else
+		_physicalvolumes
+	fi
+}
+complete -F _pvcreate pvcreate
+
+_pvmove()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-@(A|-autobackup))
+			COMPREPLY=( $( compgen -W 'y n' -- $cur ) )
+			return 0
+			;;
+		-@(n|-name))
+			_logicalvolumes
+			return 0
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '--abort -A --autobackup \
+			-b --background -d --debug -f --force -h -? \
+			--help -i --interval -t --test -v --verbose \
+			--version -n --name' -- $cur ) )
+	else
+		_physicalvolumes
+	fi
+}
+complete -F _pvmove pvmove
+
+_pvremove()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-d --debug -f --force -h -? \
+			--help -y --yes -t --test -v --verbose \
+			--version' -- $cur ) )
+	else
+		_physicalvolumes
+	fi
+}
+complete -F _pvremove pvremove
+
+_vgscan()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-d --debug -h --help \
+			--ignorelockingfailure --mknodes -P \
+			--partial -v --verbose --version' -- $cur ) )
+	fi
+}
+complete -F _vgscan vgscan
+
+_vgs()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-@(o|O|-options|-sort))
+			COMPREPLY=( $( compgen -W 'vg_fmt vg_uuid vg_name \
+				vg_attr vg_size vg_free vg_sysid \
+				vg_extent_size vg_extent_count vg_free_count \
+				max_lv max_pv pv_count lv_count snap_count \
+				vg_seqno' -- $cur ) )
+			return 0
+			;;
+		--units)
+			_units
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '--aligned -d --debug \
+			-h --help --ignorelockingfailure --noheadings \
+			--nosuffix -o --options -O --sort -P --partial \
+			--separator --unbuffered --units \
+			-v --verbose --version' -- $cur ) )
+	else
+		_volumegroups
+	fi
+}
+complete -F _vgs vgs
+
+_vgdisplay()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		--units)
+			_units
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-c --colon -C --columns --units \
+			-P --partial -A --activevolumegroups -v --verbose \
+			-d --debug -h --help --version' -- $cur ) )
+	else
+		_volumegroups
+	fi
+}
+complete -F _vgdisplay vgdisplay
+
+_vgchange()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-@(a|A|x|-available|-autobackup|-resizeable))
+			COMPREPLY=( $( compgen -W 'y n' -- $cur ) )
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-A --autobackup --alloc -P \
+			--partial -d --debug -h --help --ignorelockingfailure \
+			-t --test -u --uuid -v --verbose --version -a \
+			--available -x --resizeable -l --logicalvolume \
+			--addtag --deltag' -- $cur ) )
+	else
+		_volumegroups
+	fi
+}
+complete -F _vgchange vgchange
+
+_vgcreate()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-@(A|-autobackup))
+			COMPREPLY=( $( compgen -W 'y n' -- $cur ) )
+			return 0
+			;;
+		-@(M|-metadatatype))
+			COMPREPLY=( $( compgen -W '1 2' -- $cur ) )
+			return 0
+			;;
+		-@(s|-physicalextentsize))
+			_sizes
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-A --autobackup --addtag \
+			--alloc -d --debug -h --help -l --maxlogicalvolumes \
+			-M --metadatatype -p --maxphysicalvolumes -s \
+			--physicalextentsize -t --test -v --verbose \
+			--version' -- $cur ) )
+	else
+		_args
+		if [ $args -eq 0 ]; then
+			_volumegroups
+		else
+			_physicalvolumes
+		fi
+	fi
+}
+complete -F _vgcreate vgcreate
+
+_vgremove()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-d --debug -h --help -t --test \
+		-v --verbose --version' -- $cur ) )
+	else
+		_volumegroups
+	fi
+}
+complete -F _vgremove vgremove
+
+_vgrename()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-@(A|-autobackup))
+			COMPREPLY=( $( compgen -W 'y n' -- $cur ) )
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-A --autobackup -d --debug -h \
+			-? --help -t --test -v --verbose --version' -- $cur ) )
+	else
+		_volumegroups
+	fi
+}
+complete -F _vgrename vgrename
+
+_vgreduce()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-@(A|-autobackup))
+			COMPREPLY=( $( compgen -W 'y n' -- $cur ) )
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-a --all -A --autobackup -d \
+			--debug -h --help --removemissing -t --test -v \
+			--verbose --version' -- $cur ) )
+
+	else
+		_args
+		if [ $args -eq 0 ]; then
+			_volumegroups
+		else
+			_physicalvolumes
+		fi
+	fi
+}
+complete -F _vgreduce vgreduce
+
+_vgextend()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-@(A|-autobackup))
+			COMPREPLY=( $( compgen -W 'y n' -- $cur ) )
+			return 0
+			;;
+		-@(L|-size))
+			_sizes
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-A --autobackup -d --debug -h \
+			-? --help -t --test -v --verbose --version' -- $cur ) )
+	else
+		_args
+		if [ $args -eq 0 ]; then
+			_volumegroups
+		else
+			_physicalvolumes
+		fi
+	fi
+}
+complete -F _vgextend vgextend
+
+_vgport()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-a --all -d --debug -h \
+			-? --help -v --verbose --version' -- $cur ) )
+	else
+		_volumegroups
+	fi
+}
+complete -F _vgport vgimport vgexport
+
+_vgck()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-d --debug -h \
+			-? --help -v --verbose --version' -- $cur ) )
+	else
+		_volumegroups
+	fi
+}
+complete -F _vgck vgck
+
+_vgconvert()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-@(M|-metadatatype))
+			COMPREPLY=( $( compgen -W '1 2' -- $cur ) )
+			return 0
+			;;
+		--metadatacopies)
+			COMPREPLY=( $( compgen -W '0 1 2' -- $cur ) )
+			return 0
+			;;
+		--metadatasize)
+			_sizes
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-d --debug -h --help --labelsector \ 
+			-M --metadatatype --metadatacopies --metadatasize \
+			-t --test -v --verbose --version' -- $cur ) )
+	else
+		_volumegroups
+	fi
+}
+complete -F _vgconvert vgconvert
+
+_vgcfgbackup()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-@(f|-file))
+			_filedir
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-d --debug -f --file -h --help \
+			--ignorelockingfailure -P --partial -v --verbose \
+			--version' -- $cur ) )
+	else
+		_volumegroups
+	fi
+}
+complete -F _vgcfgbackup vgcfgbackup
+
+_vgcfgrestore()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-@(f|-file))
+			_filedir
+			return 0
+			;;
+		-@(M|-metadatatype))
+			COMPREPLY=( $( compgen -W '1 2' -- $cur ) )
+			return 0
+			;;
+		-@(n|-name))
+			_volumegroups
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-d --debug -f --file -l --list \
+			-h --help -M --Metadatatype -n --name -t --test \
+			-v --verbose --version' -- $cur ) )
+	else
+		_volumegroups
+	fi
+}
+complete -F _vgcfgrestore vgcfgrestore
+
+_vgmerge()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-@(A|-autobackup))
+			COMPREPLY=( $( compgen -W 'y n' -- $cur ) )
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-A --autobackup -d --debug \
+			-h --help -l --list -t --test -v --verbose \
+			--version' -- $cur ) )
+	else
+		_volumegroups
+	fi
+}
+complete -F _vgmerge vgmerge
+
+_vgsplit()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-@(A|-autobackup))
+			COMPREPLY=( $( compgen -W 'y n' -- $cur ) )
+			return 0
+			;;
+		-@(M|-metadatatype))
+			COMPREPLY=( $( compgen -W '1 2' -- $cur ) )
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-A --autobackup -d --debug \
+			-h --help -l --list -M --metadatatype -t --test \
+			-v --verbose --version' -- $cur ) )
+	else
+		_args
+		if [ $args -eq 0 -o $args -eq 1 ]; then
+			_volumegroups
+		else
+			_physicalvolumes
+		fi
+	fi
+}
+complete -F _vgsplit vgsplit
+
+_vgmknodes()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-d --debug -h --help -v --verbose \
+			--version' -- $cur ) )
+	else
+		_volumegroups
+	fi
+}
+complete -F _vgmknodes vgmknodes
+
+_lvscan()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-b --blockdevice -d --debug \
+			-h -? --help --ignorelockingfailure -P \
+			--partial -v --verbose --version' -- $cur ) )
+	fi
+}
+complete -F _lvscan lvscan
+
+_lvs()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-@(o|O|-options|-sort))
+			COMPREPLY=( $( compgen -W 'lv_uuid lv_name \
+				lv_attr lv_minor lv_size seg_count \
+				origin snap_percent segtype stripes \
+				stripesize chunksize seg_start \
+				seg_size' -- $cur ) )
+			return 0
+			;;
+		--units)
+			_units
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '--aligned -d --debug \
+			-h --help --ignorelockingfailure --noheadings \
+			--nosuffix -o --options -O --sort -P --partial \
+			--segments --separator --unbuffered --units \
+			-v --verbose --version' -- $cur ) )
+	else
+		_logicalvolumes
+	fi
+}
+complete -F _lvs lvs
+
+_lvdisplay()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		--units)
+			_units
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-c --colon -C --columns --units \
+			-P --partial -m --maps -v --verbose -d --debug -h \
+			--help --version' -- $cur ) )
+	else
+		_logicalvolumes
+	fi
+}
+complete -F _lvdisplay lvdisplay
+
+_lvchange()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-@(a|A|C|M|-available|-autobackup|-continguous|-persistent))
+			COMPREPLY=( $( compgen -W 'y n' -- $cur ) )
+			return 0
+			;;
+		-@(p|-permission))
+			COMPREPLY=( $( compgen -W 'r rw' -- $cur ) )
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-A --autobackup -a --available \
+			--addtag --alloc -C --contiguous -d --debug --deltag \
+			-f --force -h --help --ignorelockingfailure -M \
+			--persistent --major major --minor minor -P --partial \
+			-p --permission -r --readahead --refresh -t --test \
+			-v --verbose --version' -- $cur ) )
+	else
+		_logicalvolumes
+	fi
+}
+complete -F _lvchange lvchange
+
+_lvcreate()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-@(A|C|M|Z|-autobackup|-continguous|-persistent|-zero))
+			COMPREPLY=( $( compgen -W 'y n' -- $cur ) )
+			return 0
+			;;
+		-@(L|-size))
+			_sizes
+			return 0
+			;;
+		-@(p|-permission))
+			COMPREPLY=( $( compgen -W 'r rw' -- $cur ) )
+			return 0
+			;;
+		-@(n|-name))
+			_logicalvolumes
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-A --autobackup --addtag --alloc \
+			-C --contiguous -d --debug -h -? --help -i --stripes \
+			-I --stripesize -l --extents -L --size -M --persistent \
+			--major --minor -n --name -p --permission -r \
+			--readahead -t --test --type -v --verbose -Z --zero \
+			--version' -- $cur ) )
+	else
+		_args
+		if [ $args -eq 0 ]; then
+			_volumegroups
+		else
+			_physicalvolumes
+		fi
+	fi
+}
+complete -F _lvcreate lvcreate
+
+_lvremove()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-@(A|-autobackup))
+			COMPREPLY=( $( compgen -W 'y n' -- $cur ) )
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-A --autobackup -d --debug -f \
+			--force -h -?  --help -t --test -v --verbose \
+			--version' -- $cur ) )
+	else
+		_logicalvolumes
+	fi
+}
+complete -F _lvremove lvremove
+
+_lvrename()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-@(A|-autobackup))
+			COMPREPLY=( $( compgen -W 'y n' -- $cur ) )
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-A --autobackup -d --debug -h \
+			-? --help -t --test -v --verbose --version' -- $cur ) )
+	else
+		_logicalvolumes
+	fi
+}
+complete -F _lvrename lvrename
+
+_lvreduce()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-@(A|-autobackup))
+			COMPREPLY=( $( compgen -W 'y n' -- $cur ) )
+			return 0
+			;;
+		-@(L|-size))
+			_sizes
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-A --autobackup -d \
+			--debug -f --force -h --help -l --extents \
+			-L --size -n --nofsck -r --resizefs -t --test \
+			-v --verbose --version' -- $cur ) )
+	else
+		_logicalvolumes
+	fi
+}
+complete -F _lvreduce lvreduce
+
+_lvresize()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-@(A|-autobackup))
+			COMPREPLY=( $( compgen -W 'y n' -- $cur ) )
+			return 0
+			;;
+		-@(L|-size))
+			_sizes
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-A --autobackup --alloc -d \
+			--debug -h --help -i --stripes -I --stripesize \
+			-l --extents -L --size -n --nofsck -r --resizefs \
+			-t --test --type -v --verbose --version' -- $cur ) )
+	else
+		_args
+		if [ $args -eq 0 ]; then
+			_logicalvolumes
+		else
+			_physicalvolumes
+		fi
+	fi
+}
+complete -F _lvresize lvresize
+
+_lvextend()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+		-@(A|-autobackup))
+			COMPREPLY=( $( compgen -W 'y n' -- $cur ) )
+			return 0
+			;;
+		-@(L|-size))
+			_sizes
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-A --autobackup --alloc -d \
+			--debug -h --help -i --stripes -I --stripesize \
+			-l --extents -L --size -n --nofsck -r --resizefs \
+			-t --test --type -v --verbose --version' -- $cur ) )
+	else
+		_args
+		if [ $args -eq 0 ]; then
+			_logicalvolumes
+		else
+			_physicalvolumes
+		fi
+	fi
+}
+complete -F _lvextend lvextend
+
+_lvm()
+{
+	local prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	if [ $COMP_CWORD -eq 1 ]; then
+		COMPREPLY=( $( compgen -W 'dumpconfig help lvchange \
+			lvcreate lvdisplay lvextend lvmchange \
+			lvmdiskscan lvmsadc lvmsar lvreduce \
+			lvremove lvrename lvresize lvs lvscan \
+			pvchange pvcreate pvdata pvdisplay pvmove \
+			pvremove pvresize pvs pvscan vgcfgbackup \
+			vgcfgrestore vgchange vgck vgconvert \
+			vgcreate vgdisplay vgexport vgextend \
+			vgimport vgmerge vgmknodes vgreduce \
+			vgremove vgrename vgs vgscan vgsplit \
+			version' -- $cur ) )
+	else
+		case ${COMP_WORDS[1]} in
+			pvchange)
+				_pvchange
+				;;
+			pvcreate)
+				_pvcreate
+				;;
+			pvdisplay)
+				_pvdisplay
+				;;
+			pvmove)
+				_pvmove
+				;;
+			pvremove)
+				_pvremove
+				;;
+			pvresize)
+				_pvresize
+				;;
+			pvs)
+				_pvs
+				;;
+			pvscan)
+				_pvscan
+				;;
+			vgcfgbackup)
+				_vgcfgbackup
+				;;
+			vgcfgrestore)
+				_vgcfgrestore
+				;;
+			vgchange)
+				_vgchange
+				;;
+			vgck)
+				_vgck
+				;;
+			vgconvert)
+				_vgconvert
+				;;
+			vgcreate)
+				_vgcreate
+				;;
+			vgdisplay)
+				_vgdisplay
+				;;
+			vgexport)
+				_vgexport
+				;;
+			vgextend)
+				_vgextend
+				;;
+			vgimport)
+				_vgimport
+				;;
+			vgmerge)
+				_vgmerge
+				;;
+			vgmknodes)
+				_vgmknodes
+				;;
+			vgreduce)
+				_vgreduce
+				;;
+			vgremove)
+				_vgremove
+				;;
+			vgrename)
+				_vgrename
+				;;
+			vgs)
+				_vgs
+				;;
+			vgscan)
+				_vgscan
+				;;
+			vgsplit)
+				_vgsplit
+				;;
+			lvchange)
+				_lvchange
+				;;
+			lvcreate)
+				_lvcreate
+				;;
+			lvdisplay)
+				_lvdisplay
+				;;
+			lvextend)
+				_lvextend
+				;;
+			lvreduce)
+				_lvreduce
+				;;
+			lvremove)
+				_lvremove
+				;;
+			lvrename)
+				_lvrename
+				;;
+			lvresize)
+				_lvresize
+				;;
+			lvs)
+				_lvs
+				;;
+			lvscan)
+				_lvscan
+				;;
+		esac
+	fi
+}
+complete -F _lvm lvm
+}
+
+# mkinitrd(8) completion
+#
+have mkinitrd &&
+_mkinitrd()
+{
+	local cur args
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	# --name value style option
+	case "$prev" in
+		--preload)
+			_modules
+			return 0
+			;;
+	esac
+
+	# --name=value style option
+	if [[ "$cur" == *=* ]]; then
+		prev=${cur/=*/}
+		cur=${cur/*=/}
+		case "$prev" in
+			--@(with|builtin))
+				_modules
+				return 0
+				;;
+			--@(fstab|dsdt))
+				_filedir
+				return 0
+				;;
+			--tmpdir)
+				_filedir -d
+				return 0
+				;;
+		esac
+	fi
+
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '--version -v -f --preload \
+			--with= --omit-scsi-modules --omit-raid-modules \
+			--images-version --fstab= --nocompress --builtin= \
+			--nopivot --noudev --allow-missing --tmpdir= \
+			--initrdfs= --dsdt= --lvm-version= --froce-usb' \
+			-- $cur ) )
+	else
+		_count_args
+
+		case $args in
+			1)
+				_filedir
+				;;
+			2)
+				COMPREPLY=( $( command ls /lib/modules | grep "^$cur" ) )
+				;;
+		esac
+	fi
+
+} &&
+complete -F _mkinitrd mkinitrd
+
+# pkgconfig(1) completion
+#
+have pkg-config &&
+_pkg_config()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	if [[ "$cur" == -* ]]; then
+		# return list of available options
+		COMPREPLY=( $( compgen -W '-version --modversion \
+		      --atleast-pkgconfig-version= --libs --libs-only-l \
+		      --libs-only-other --libs-only-L --cflags \
+		      --cflags-only-I --cflags-only-other --variable= \
+		      --define-variable= --exists --uninstalled \
+		      --atleast-version= --exact-version= --max-version= \
+		      --list-all --debug --print-errors --silence-errors \
+		      --errors-to-stdout -? --help --usage' -- $cur))
+	else
+		COMPREPLY=( $( pkg-config --list-all 2>/dev/null | \
+				    awk '{print $1}' | grep "^$cur" ) )
+	fi
+} &&
+complete -F _pkg_config pkg-config
+
+
+# cpio(1) completion
+#
+have cpio && {
+_cpio_format()
+{
+	COMPREPLY=( $( compgen -W 'bin odc newc crc tar ustar hpbin hpodc' -- $cur ) )
+}
+
+_cpio()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	# --name value style option
+	case $prev in
+		-H)
+			_cpio_format
+			return 0
+			;;
+		-@(E|F|I))
+			_filedir
+			return 0
+			;;
+		-R)
+			_usergroup
+			return 0
+			;;
+	esac
+
+	# --name=value style option
+	if [[ "$cur" == *=* ]]; then
+		prev=${cur/=*/}
+		cur=${cur/*=/}
+		case $prev in
+			--format)
+				_cpio_format
+				return 0
+				;;
+			--@(file|pattern-file))
+				_filedir
+				return 0
+				;;
+			--owner)
+				_usergroup
+				return 0
+				;;
+			--rsh-command)
+				COMPREPLY=( $( compgen -c -- $cur ) )
+				return 0
+				;;
+		esac
+	fi
+
+	if [ $COMP_CWORD -eq 1 ]; then
+		COMPREPLY=( $( compgen -W '-o --create -i --extract -p --pass-through' -- $cur) ) 
+	else
+		case ${COMP_WORDS[1]} in
+			-@(o|-create))
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-0 -a -c -v -A -B\
+						-L -V -C -H -M -O -F --file= --format=\
+						--message= --null --reset-access-time\
+						--verbose --dot --append --block-size=\
+						--dereference --io-size= --quiet\
+						--force-local --rsh-command= --help\
+						--version' -- $cur ) )
+				fi
+				;;
+			-@(i|-extract))
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-b -c -d -f -m -n -r\
+						-t -s -u -v -B -S -V -C -E -H -M -R -I\
+						-F --file= --make-directories\
+						--nonmatching\
+						--preserve-modification-time\
+						--numeric-uid-gid --rename -t --list\
+						--swap-bytes --swap --dot\
+						--unconditional --verbose --block-size=\
+						--swap-halfwords --io-size=\
+						--pattern-file= --format= --owner=\
+						--no-preserve-owner --message=\
+						--force-local --no-absolute-filenames\
+						--sparse --only-verify-crc --quiet\
+						--rsh-command= --help\
+						--version' -- $cur ) )
+				fi
+				;;
+			-@(p|-pass-through))
+				if [[ "$cur" == -* ]]; then
+					COMPREPLY=( $( compgen -W '-0 -a -d -l -m -u -v\
+						-L -V -R --null --reset-access-time\
+						--make-directories --link --quiet\
+						--preserve-modification-time\
+						--unconditional --verbose --dot\
+						--dereference --owner=\
+						--no-preserve-owner --sparse --help\
+						--version' -- $cur ) )
+				else
+					_filedir -d
+				fi
+				;;
+		esac
+	fi
+}
+complete -F _cpio cpio
+}
+
+# id(1) completion
+#
+have id &&
+_id()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-a -g --group -G --groups -n --name\
+			-r --real -u --user --help --version' -- $cur ) )
+	else
+		COMPREPLY=( $( compgen -u $cur  ) )
+	fi
+} &&
+complete -F _id id
+
+# getent(1) completion
+#
+have getent &&
+_getent()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case $prev in
+		passwd)
+			COMPREPLY=( $( compgen -u $cur  ) )
+			return 0
+			;;
+		group)
+			COMPREPLY=( $( compgen -g $cur  ) )
+			return 0
+			;;
+		services)
+			COMPREPLY=( $( compgen -s $cur  ) )
+			return 0
+			;;
+		hosts)
+			COMPREPLY=( $( compgen -A hostname $cur  ) )
+			return 0
+			;;
+		protocols)
+			COMPREPLY=( $( getent protocols | awk '{print $1}' | grep "^$cur" ) )
+			return 0
+			;;
+		networks)
+			COMPREPLY=( $( getent networks | awk '{print $1}' | grep "^$cur" ) )
+			return 0
+			;;
+	esac
+
+
+	if [ $COMP_CWORD -eq 1 ]; then
+		COMPREPLY=( $( compgen -W 'passwd group hosts services protocols networks' -- $cur ) )
+	fi
+} &&
+complete -F _getent getent
+
+# ntpdate(1) completion
+#
+have ntpdate &&
+_ntpdate()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case $prev in
+		-k)
+			_filedir
+			return 0
+			;;
+		-U)
+			COMPREPLY=( $( compgen -u $cur  ) )
+			return 0
+			;;
+	esac
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-4 -6 -b -B -d -Q -q -s -u -v -a\
+			-e -k -p -o -r -t' -- $cur ) )
+	else
+		_known_hosts
+	fi
+} &&
+complete -F _ntpdate ntpdate
+
+# smartctl(8) completion
+#
+have smartctl && {
+_smartctl_quietmode()
+{
+	COMPREPLY=( $( compgen -W 'errorsonly silent' -- $cur ) )
+}
+_smartctl_device()
+{
+	COMPREPLY=( $( compgen -W 'ata scsi 3ware' -- $cur ) )
+}
+_smartctl_tolerance()
+{
+	COMPREPLY=( $( compgen -W 'warn exit ignore' -- $cur ) )
+}
+_smartctl_badsum()
+{
+	COMPREPLY=( $( compgen -W 'normal conservative permissive verypermissive' -- $cur ) )
+}
+_smartctl_report()
+{
+	COMPREPLY=( $( compgen -W 'ioctl ataioctl scsiioctl' -- $cur ) )
+}
+_smartctl_feature()
+{
+	COMPREPLY=( $( compgen -W 'on off' -- $cur ) )
+}
+_smartctl_log()
+{
+	COMPREPLY=( $( compgen -W 'error selftest selective directory' -- $cur ) )
+}
+_smartctl_vendorattribute()
+{
+	COMPREPLY=( $( compgen -W 'help 9,minutes 9,seconds 9,halfminutes \
+		9,temp 192,emergencyretractcyclect 193,loadunload \
+		194,10xCelsius 194,unknown 198,offlinescanuncsectorct \
+		200,writeerrorcount 201,detectedtacount 220,temp' -- $cur ) )
+}
+_smartctl_firmwarebug()
+{
+	COMPREPLY=( $( compgen -W 'none samsung samsung2' -- $cur ) )
+}
+_smartctl_presets()
+{
+	COMPREPLY=( $( compgen -W 'use ignore show showall' -- $cur ) )
+}
+_smartctl_test()
+{
+	COMPREPLY=( $( compgen -W 'offline short long conveyance select afterselect,on afterselect,off pending' -- $cur ) )
+}
+
+_smartctl()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	# --name value style option
+	case "$prev" in
+		-q)
+			_smartctl_quietmode
+			;;
+		-d)
+			_smartctl_device
+			return 0
+			;;
+		-t)
+			_smartctl_tolerance
+			return 0
+			;;
+		-b)
+			_smartctl_badsum
+			return 0
+			;;
+		-r)
+			_smartctl_report
+			return 0
+			;;
+		-s)
+			_smartctl_feature
+			return 0
+			;;
+		-o)
+			_smartctl_feature
+			return 0
+			;;
+		-S)
+			_smartctl_feature
+			return 0
+			;;
+		-l)
+			_smartctl_log
+			return 0
+			;;
+		-v)
+			_smartctl_vendorattribute
+			return 0
+			;;
+		-F)
+			_smartctl_firmwarebug
+			return 0
+			;;
+		-P)
+			_smartctl_presets
+			return 0
+			;;
+		-t)
+			_smartctl_test
+			return 0
+			;;
+	esac
+
+	# --name=value style option
+	if [[ "$cur" == *=* ]]; then
+		prev=${cur/=*/}
+		cur=${cur/*=/}
+		case "$prev" in
+			--quietmode)
+				_smartctl_quietmode
+				return 0
+				;;
+			--device)
+				_smartctl_device
+				return 0
+				;;
+			--tolerance)
+				_smartctl_tolerance
+				return 0
+				;;
+			--badsum)
+				_smartctl_badsum
+				return 0
+				;;
+			--report)
+				_smartctl_report
+				return 0
+				;;
+			--smart)
+				_smartctl_feature
+				return 0
+				;;
+			--offlineauto)
+				_smartctl_feature
+				return 0
+				;;
+			--saveauto)
+				_smartctl_feature
+				return 0
+				;;
+			--log)
+				_smartctl_log
+				return 0
+				;;
+			--vendorattribute)
+				_smartctl_vendorattribute
+				return 0
+				;;
+			--firmwarebug)
+				_smartctl_firmwarebug
+				return 0
+				;;
+			--presets)
+				_smartctl_presets
+				return 0
+				;;
+			--test)
+				_smartctl_test
+				return 0
+				;;
+		esac
+	fi
+
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-h --help --usage -V --version \
+			--copyright --license-i --info -a --all -q \
+			--quietmode= -d --device= -T --tolerance= -b --badsum= \
+			-r --report= -s --smart= -o --offlineauto= -S \
+			--saveauto= -H --health -c --capabilities -A \
+			--attributes -l --log= -v --vendorattribute= -F \
+			--firmwarebug= -P --presets= -t --test= -C \
+			--captive -X --abort' -- $cur ) )
+	else
+		cur=${cur:=/dev/}
+		_filedir
+	fi
+}
+complete -F _smartctl smartctl
+}
+
+# vncviewer(1) completion
+#
+have vncviewer &&
+_vncviewer()
+{
+	local cur prev
+	local -a config
+    
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case "$prev" in
+	-via)
+	   _known_hosts -a
+	   ;;
+	*)
+	   # ssh into the the server, find and ping the broadcast address, then
+	   # sort and show the results.
+	   COMPREPLY=( $( ssh -o 'Batchmode yes' $prev \
+			  "ping -bnc 4 255.255.255.255" 2>/dev/null | \
+			  awk -F ' ' '{print $4}' | \
+			  sort -n | uniq | egrep '[0-9]+\.[0-9]+\.' 2>/dev/null ) )
+	esac
+								   
+	return 0
+} &&
+complete -F _vncviewer vncviewer
+
+# sysctl(8) completion
+#
+have sysctl &&
+_sysctl()
+{
+	local cur
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	COMPREPLY=( $( compgen -W "$(sysctl -N -a 2>/dev/null)" -- $cur ) )
+
+	return 0
+} &&
+complete -F _sysctl sysctl
+
+# update-rc.d(8) completion
+#
+# Copyright (C) 2004 Servilio Afre Puentes <servilio@gmail.com>
+#
+have update-rc.d &&
+_update_rc_d()
+{
+    local cur prev sysvdir services options valid_options
+
+    cur=`_get_cword`
+    prev=${COMP_WORDS[COMP_CWORD-1]}
+
+    [ -d /etc/rc.d/init.d ] && sysvdir=/etc/rc.d/init.d \
+	|| sysvdir=/etc/init.d
+
+    services=( $(echo $sysvdir/!(README*|*.sh|*.dpkg*|*.rpm*)) )
+    services=( ${services[@]#$sysvdir/} )
+    options=( -f -n )
+
+    if [[ $COMP_CWORD -eq 1 || "$prev" == -* ]]; then
+	valid_options=( $( \
+	    echo "${COMP_WORDS[@]} ${options[@]}" \
+	    | tr " " "\n" \
+	    | sed -ne "/$( echo "${options[@]}" | sed "s/ /\\|/g" )/p" \
+	    | sort | uniq -u \
+	    ) )
+	COMPREPLY=( $( compgen -W '${options[@]} ${services[@]}' \
+	    -X '$( echo ${COMP_WORDS[@]} | tr " " "|" )' -- $cur ) )
+    elif [[ "$prev" == ?($( echo ${services[@]} | tr " " "|" )) ]]; then
+	COMPREPLY=( $( compgen -W 'remove defaults start stop' -- $cur ) )
+    elif [[ "$prev" == defaults && "$cur" == [0-9] ]]; then
+	COMPREPLY=( 0 1 2 3 4 5 6 7 8 9 )
+    elif [[ "$prev" == defaults && "$cur" == [sk]?([0-9]) ]]; then
+	COMPREPLY=( 0 1 2 3 4 5 6 7 8 9 )
+    elif [[ "$prev" == defaults && -z "$cur" ]]; then
+	COMPREPLY=( 0 1 2 3 4 5 6 7 8 9 s k )
+    elif [[ "$prev" == ?(start|stop) ]]; then
+	if [[ "$cur" == [0-9] || -z "$cur" ]]; then 
+	    COMPREPLY=( 0 1 2 3 4 5 6 7 8 9 )
+	elif [[ "$cur" == [0-9][0-9] ]]; then 
+	    COMPREPLY=( $cur )
+	else
+	    COMPREPLY=()
+	fi
+    elif [[ "$prev" == ?([0-9][0-9]|[0-6S]) ]]; then
+	if [[ -z "$cur" ]]; then
+	    if [[ $prev == [0-9][0-9] ]]; then
+		COMPREPLY=( 0 1 2 3 4 5 6 S )
+	    else
+		COMPREPLY=( 0 1 2 3 4 5 6 S . )
+	    fi
+	elif [[ "$cur" == [0-6S.] ]]; then 
+	    COMPREPLY=( $cur )
+	else
+	    COMPREPLY=()
+	fi
+    elif [[ "$prev" == "." ]]; then
+	COMPREPLY=( $(compgen -W "start stop" -- $cur) )
+    else
+	COMPREPLY=()
+    fi
+
+    return 0
+} &&
+complete -F _update_rc_d update-rc.d
+
+# invoke-rc.d(8) completion
+#
+# Copyright (C) 2004 Servilio Afre Puentes <servilio@gmail.com>
+#
+have invoke-rc.d &&
+_invoke_rc_d()
+{
+    local cur prev sysvdir services options valid_options
+
+    cur=`_get_cword`
+    prev=${COMP_WORDS[COMP_CWORD-1]}
+
+    [ -d /etc/rc.d/init.d ] && sysvdir=/etc/rc.d/init.d \
+	|| sysvdir=/etc/init.d
+
+    services=( $(echo $sysvdir/!(README*|*.sh|*.dpkg*|*.rpm*)) )
+    services=( ${services[@]#$sysvdir/} )
+    options=( --help --quiet --force --try-anyway --disclose-deny --query --no-fallback )
+
+    if [[ ($COMP_CWORD -eq 1) || ("$prev" == --* ) ]]; then
+	valid_options=( $( \
+	    echo ${COMP_WORDS[@]} ${options[@]} \
+	    | tr " " "\n" \
+	    | sed -ne "/$( echo ${options[@]} | sed "s/ /\\\\|/g" )/p" \
+	    | sort | uniq -u \
+	    ) )
+	COMPREPLY=( $( compgen -W '${valid_options[@]} ${services[@]}' -- \
+	    $cur ) )
+    elif [ -x $sysvdir/$prev ]; then
+	COMPREPLY=( $( compgen -W '`sed -ne "y/|/ /; \
+					    s/^.*Usage:[ ]*[^ ]*[ ]*{*\([^}\"]*\).*$/\1/p" \
+					    $sysvdir/$prev`' -- \
+	    $cur ) )
+    else
+	COMPREPLY=()
+    fi
+
+    return 0
+} &&
+complete -F _invoke_rc_d invoke-rc.d
+
+# minicom(1) completion
+#
+have minicom &&
+_minicom()
+{
+	local cur prev
+
+	COMPREPLY=()
+	cur=`_get_cword`
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	case $prev in
+		-@(a|c))
+			COMPREPLY=( $( compgen -W 'on off' -- $cur ) )
+			return 0
+			;;
+		-@(S|C))
+			_filedir
+			return 0
+			;;
+		-P)
+			COMPREPLY=( $( command ls /dev/tty* ) )
+			COMPREPLY=( $( compgen -W '${COMPREPLY[@]} ${COMPREPLY[@]#/dev/}' -- $cur ) )
+			return 0
+			;;
+	esac
+
+
+	if [[ "$cur" == -* ]]; then
+		COMPREPLY=( $( compgen -W '-s -o -m -M -z -l -L -w -a -t \
+			-c -S -d -p -C -T -8' -- $cur ) )
+	else
+		COMPREPLY=( $( command ls /etc/minicom/minirc.* 2>/dev/null | sed -e 's|/etc/minicom/minirc.||' | grep "^$cur" ) )
+	fi
+} &&
+complete -F _minicom minicom
+
+# svn completion
+#
+have svn &&
+{
+_svn()
+{
+	local cur prev commands options command
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	commands='add blame praise annotate ann cat checkout co cleanup commit \
+		ci copy cp delete del remove rm diff di export help ? h import \
+		info list ls lock log merge mkdir move mv rename ren \
+		propdel pdel pd propedit pedit pe propget pget pg \
+		proplist plist pl propset pset ps resolved revert \
+		status stat st switch sw unlock update up'
+
+	if [[ $COMP_CWORD -eq 1 ]] ; then
+		if [[ "$cur" == -* ]]; then
+			COMPREPLY=( $( compgen -W '--version' -- $cur ) )
+		else
+			COMPREPLY=( $( compgen -W "$commands" -- $cur ) )
+		fi
+	else
+
+		prev=${COMP_WORDS[COMP_CWORD-1]}
+		case $prev in
+			--config-dir)
+				_filedir -d
+				return 0;
+				;;
+			-@(F|-file|-targets))
+				_filedir
+				return 0;
+				;;
+			--encoding)
+				COMPREPLY=( $( compgen -W \
+					'$( iconv --list | sed -e "s@//@@;" )' \
+					-- "$cur" ) )
+				return 0;
+				;;
+			--@(editor|diff|diff3)-cmd)
+				COMP_WORDS=(COMP_WORDS[0] $cur)
+				COMP_CWORD=1
+				_command
+				return 0;
+				;;
+		esac
+
+		command=${COMP_WORDS[1]}
+
+		if [[ "$cur" == -* ]]; then
+			# possible options for the command
+			case $command in
+				add)
+					options='--auto-props --no-auto-props \
+						--force --targets --no-ignore \
+						--non-recursive -N -q --quiet'
+					;;
+				@(blame|annotate|ann|praise))
+					options='-r --revisions --username \
+						--password --no-auth-cache \
+						--non-interactive -v \
+						--verbose --incremental --xml'
+					;;
+				cat)
+					options='-r --revision --username \
+						--password --no-auth-cache \
+						--non-interactive'
+					;;
+				@(checkout|co))
+					options='-r --revision -q --quiet -N \
+						--non-recursive --username \
+						--password --no-auth-cache \
+						--non-interactive \
+						--ignore-externals'
+					;;
+				cleanup)
+					options='--diff3-cmd'
+					;;
+				@(commit|ci))
+					options='-m --message -F --file \
+						--encoding --force-log -q \
+						--quiet --non-recursive -N \
+						--targets --editor-cmd \
+						--username --password \
+						--no-auth-cache \
+						--non-interactive --no-unlock'
+					;;
+				@(copy|cp))
+					options='-m --message -F --file \
+						--encoding --force-log -r \
+						--revision -q --quiet \
+						--editor-cmd -username \
+						--password --no-auth-cache \
+						--non-interactive'
+					;;
+				@(delete|del|remove|rm))
+					options='--force -m --message -F \
+						--file --encoding --force-log \
+						-q --quiet --targets \
+						--editor-cmd -username \
+						--password --no-auth-cache \
+						--non-interactive'
+					;;
+				@(diff|di))
+					options='-r --revision -x --extensions \
+						--diff-cmd --no-diff-deleted \
+						-N --non-recursive --username \
+						--password --no-auth-cache \
+						--non-interactive --force \
+						--old --new --notice-ancestry'
+					;;
+				export)
+					options='-r --revision -q --quiet \
+						--username --password \
+						--no-auth-cache \
+						--non-interactive -N \
+						--non-recursive --force \
+						--native-eol --ignore-externals'
+					;;
+				import)
+					options='--auto-props --no-auto-props \
+						-m --message -F --file \
+						--encoding --force-log -q \
+						--quiet --non-recursive \
+						--no-ignore --editor-cmd \
+						--username --password \
+						--no-auth-cache \
+						--non-interactive'
+					;; 
+				info)
+					options='--username --password \
+						--no-auth-cache \
+						--non-interactive -r \
+						--revision --xml --targets \
+						-R --recursive --incremental'
+					;;
+				@(list|ls))
+					options='-r --revision -v --verbose -R \
+						--recursive --username \
+						--password --no-auth-cache \
+						--non-interactive \
+						--incremental --xml'
+					;;
+				lock)
+					options='-m --message -F --file \
+						--encoding --force-log \
+						--targets --force --username \
+						--password --no-auth-cache \
+						--non-interactive'
+					;;
+				log)
+					options='-r --revision -v --verbose \
+						--targets --username \
+						--password --no-auth-cache \
+						--non-interactive \
+						--stop-on-copy --incremental \
+						--xml -q --quiet --limit'
+					;;
+				merge)
+					options='-r --revision -N \
+						--non-recursive -q --quiet \
+						--force --dry-run --diff3-cmd \
+						--username --password \
+						--no-auth-cache \
+						--non-interactive \
+						--ignore-ancestry'
+					;;
+				mkdir)
+					options='-m --message -F --file \
+						--encoding --force-log -q \
+						--quiet --editor-cmd \
+						--username --password \
+						--no-auth-cache \
+						--non-interactive'
+					;;
+				@(move|mv|rename|ren))
+					options='-m --message -F --file \
+						--encoding --force-log -r \
+						--revision -q --quiet \
+						--force --editor-cmd \
+						--username --password \
+						--no-auth-cache \
+						--non-interactive'
+					;;
+				@(propdel|pdel|pd))
+					options='-q --quiet -R --recursive -r \
+						--revision --revprop \
+						--username --password \
+						--no-auth-cache \
+						--non-interactive'
+					;;
+				@(propedit|pedit|pe))
+					options='-r --revision --revprop \
+						--encoding --editor-cmd \
+						--username --password \
+						--no-auth-cache \
+						--non-interactive --force'
+					;;
+				@(propget|pget|pg))
+					options='-R --recursive -r --revision \
+						--revprop --strict --username \
+						--password --no-auth-cache \
+						--non-interactive'
+					;;
+				@(proplist|plist|pl))
+					options='-v --verbose -R --recursive \
+						-r --revision --revprop -q \
+						--quiet --username --password \
+						--no-auth-cache \
+						--non-interactive'
+					;;
+				@(propset|pset|ps))
+					options='-F --file -q --quiet \
+						--targets -R --recursive \
+						--revprop --encoding \
+						--username --password \
+						--no-auth-cache \
+						--non-interactive -r \
+						--revision --force'
+					;;
+				resolved)
+					options='--targets -R --recursive -q \
+						--quiet'
+					;;
+				revert)
+					options='--targets -R --recursive -q \
+						--quiet'
+					;;
+				@(status|stat|st))
+					options='-u --show-updates -v \
+						--verbose -N --non-recursive \
+						-q --quiet --username \
+						--password --no-auth-cache \
+						--non-interactive --no-ignore \
+						--ignore-externals \
+						--incremental --xml'
+					;;
+				@(switch|sw))
+					options='--relocate -r --revision -N \
+						--non-recursive -q --quiet \
+						--username --password \
+						--no-auth-cache \
+						--non-interactive --diff3-cmd'
+					;;
+				unlock)
+					options='--targets --force --username \
+						--password --no-auth-cache \
+						--non-interactive'
+					;;
+				@(update|up))
+					options='-r --revision -N \
+						--non-recursive -q --quiet \
+						--username --password \
+						--no-auth-cache \
+						--non-interactive \
+						--diff3-cmd --ignore-externals'
+					;;
+			esac
+			options="$options --help -h --config-dir"
+
+			COMPREPLY=( $( compgen -W "$options" -- $cur ) )
+		else
+			if [[ "$command" == @(help|h|\?) ]]; then
+				COMPREPLY=( $( compgen -W "$commands" -- $cur ) )
+			else
+				_filedir
+			fi
+		fi
+	fi
+
+	return 0
+}
+complete -F _svn $default svn
+
+_svnadmin()
+{
+	local cur prev commands options mode
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	commands='create deltify dump help ? hotcopy list-dblogs \
+		list-unused-dblogs load lslocks lstxns recover rmlocks \
+		rmtxns setlog verify'
+
+	if [[ $COMP_CWORD -eq 1 ]] ; then
+		if [[ "$cur" == -* ]]; then
+			COMPREPLY=( $( compgen -W '--version' -- $cur ) )
+		else
+			COMPREPLY=( $( compgen -W "$commands" -- $cur ) )
+		fi
+	else
+		prev=${COMP_WORDS[COMP_CWORD-1]}
+		case $prev in
+			--config-dir)
+				_filedir -d
+				return 0;
+				;;
+			--fs-type)
+				COMPREPLY=( $( compgen -W 'fsfs bdb' -- $cur ) )
+				return 0;
+				;;
+		esac
+
+		command=${COMP_WORDS[1]}
+
+		if [[ "$cur" == -* ]]; then
+			# possible options for the command
+			case $command in
+				create)
+					options='--bdb-txn-nosync \
+						--bdb-log-keep --config-dir \
+						--fs-type'
+					;;
+				deltify)
+					options='-r --revision -q --quiet'
+					;;
+				dump)
+					options='-r --revision --incremental \
+						-q --quiet --deltas'
+					;;
+				hotcopy)
+					options='--clean-logs'
+					;;
+				load)
+					options='--ignore-uuid --force-uuid \
+						--parent-dir -q --quiet \
+						--use-pre-commit-hook \
+						--use-post-commit-hook'
+					;;
+				rmtxns)
+					options='-q --quiet'
+					;;
+				setlog)
+					options='-r --revision --bypass-hooks'
+					;;
+			esac
+
+			options="$options --help -h"
+			COMPREPLY=( $( compgen -W "$options" -- $cur ) )
+		else
+			if [[ "$command" == @(help|h|\?) ]]; then
+				COMPREPLY=( $( compgen -W "$commands" -- $cur ) )
+			else
+				_filedir
+			fi
+		fi
+	fi
+
+	return 0
+}
+complete -F _svnadmin $default svnadmin
+
+_svnlook()
+{
+	local cur prev commands options mode
+
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	commands='author cat changed date diff dirs-changed help ? h history \
+		info lock log propget pget pg proplist plist pl tree uuid \
+		youngest'
+
+	if [[ $COMP_CWORD -eq 1 ]] ; then
+		if [[ "$cur" == -* ]]; then
+			COMPREPLY=( $( compgen -W '--version' -- $cur ) )
+		else
+			COMPREPLY=( $( compgen -W "$commands" -- $cur ) )
+		fi
+	else
+		command=${COMP_WORDS[1]}
+
+		if [[ "$cur" == -* ]]; then
+			# possible options for the command
+			case $command in
+				@(author|cat|date|dirs-changed|info|log))
+					options='-r --revision -t \
+						--transaction'
+					;;
+				changed)
+					options='-r --revision -t \
+						--transaction --copy-info'
+					;;
+				diff)
+					options='-r --revision -t \
+						--transaction \
+						--no-diff-deleted \
+						--no-diff-added \
+						--diff-copy-from'
+					;;
+				history)
+					options='-r --revision --show-ids'
+					;;
+				prop@(get|list))
+					options='-r --revision -t \
+						--transaction --revprop'
+					;;
+				tree)
+					options='-r --revision -t \
+						--transaction --show-ids \
+						--full-paths'
+					;;
+			esac
+
+			options="$options --help -h"
+			COMPREPLY=( $( compgen -W "$options" -- $cur ) )
+		else
+			if [[ "$command" == @(help|h|\?) ]]; then
+				COMPREPLY=( $( compgen -W "$commands" -- $cur ) )
+			else
+				_filedir
+			fi
+		fi
+	fi
+
+	return 0
+}
+complete -F _svnlook $default svnlook
+}
+
+_filedir_xspec()
+{
+	local IFS cur xspec
+
+	IFS=$'\t\n'
+	COMPREPLY=()
+	cur=`_get_cword`
+
+	_expand || return 0
+
+	# get first exclusion compspec that matches this command
+	xspec=$( sed -ne $'/^complete .*[ \t]'${1##*/}$'\([ \t]\|$\)/{p;q;}' \
+		  $BASH_COMPLETION )
+	# prune to leave nothing but the -X spec
+	xspec=${xspec#*-X }
+	xspec=${xspec%% *}
+
+	local toks=( ) tmp
+
+	while read -r tmp; do
+		[[ -n $tmp ]] && toks[${#toks[@]}]=$tmp
+	done < <( compgen -d -- "$(quote_readline "$cur")" )
+
+	while read -r tmp; do
+		[[ -n $tmp ]] && toks[${#toks[@]}]=$tmp
+	done < <( eval compgen -f -X $xspec -- "\$(quote_readline "\$cur")" )
+
+	COMPREPLY=( "${toks[@]}" )
+}
+list=( $( sed -ne '/^# START exclude/,/^# FINISH exclude/p' \
+	  $BASH_COMPLETION | \
+	# read exclusion compspecs
+	(
+	while read line
+	do
+		# ignore compspecs that are commented out
+		if [ "${line#\#}" != "$line" ]; then continue; fi
+		line=${line%# START exclude*}
+		line=${line%# FINISH exclude*}
+		line=${line##*\'}
+		list=( "${list[@]}" $line )
+	done
+	echo "${list[@]}"
+	)
+     ) )
+# remove previous compspecs
+if [ ${#list[@]} -gt 0 ]; then
+    eval complete -r ${list[@]}
+    # install new compspecs
+    eval complete -F _filedir_xspec $filenames "${list[@]}"
+fi
+unset list
+
+# source completion directory definitions
+if [ -d $BASH_COMPLETION_DIR -a -r $BASH_COMPLETION_DIR -a \
+     -x $BASH_COMPLETION_DIR ]; then
+	for i in $BASH_COMPLETION_DIR/*; do
+		[[ ${i##*/} != @(*~|*.bak|*.swp|\#*\#|*.dpkg*|.rpm*) ]] &&
+			[ \( -f $i -o -h $i \) -a -r $i ] && . $i
+	done
+fi
+unset i
+
+# source user completion file
+[ $BASH_COMPLETION != ~/.bash_completion -a -r ~/.bash_completion ] \
+	&& . ~/.bash_completion
+unset -f have
+unset UNAME RELEASE default dirnames filenames have nospace bashdefault \
+      plusdirs
+
+set $BASH_COMPLETION_ORIGINAL_V_VALUE
+unset BASH_COMPLETION_ORIGINAL_V_VALUE
+
+###  Local Variables:
+###  mode: shell-script
+###  End:
diff --git a/examples/complete/bashcc-1.0.1.tar.gz b/examples/complete/bashcc-1.0.1.tar.gz
new file mode 100644
index 0000000..d680435
--- /dev/null
+++ b/examples/complete/bashcc-1.0.1.tar.gz
diff --git a/examples/complete/cdfunc b/examples/complete/cdfunc
new file mode 100644
index 0000000..439edaf
--- /dev/null
+++ b/examples/complete/cdfunc
@@ -0,0 +1,76 @@
+#  cdfunc - example completion function for cd
+#
+#  based on the cd completion function from the bash_completion package
+#
+#  Chet Ramey <chet.ramey@case.edu>
+#
+#  Copyright 2011 Chester Ramey
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   TThis program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software Foundation,
+#   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+_comp_cd()
+{
+	local IFS=$' \t\n'	# normalize IFS
+	local cur _skipdot _cdpath
+	local i j k
+
+	# Tilde expansion, with side effect of expanding tilde to full pathname
+	case "$2" in
+	\~*)	eval cur="$2" ;;
+	*)	cur=$2 ;;
+	esac
+
+	# no cdpath or absolute pathname -- straight directory completion
+	if [[ -z "${CDPATH:-}" ]] || [[ "$cur" == @(./*|../*|/*) ]]; then
+		# compgen prints paths one per line; could also use while loop
+		IFS=$'\n'
+		COMPREPLY=( $(compgen -d -- "$cur") )
+		IFS=$' \t\n'
+	# CDPATH+directories in the current directory if not in CDPATH
+	else
+		IFS=$'\n'
+		_skipdot=false
+		# preprocess CDPATH to convert null directory names to .
+		_cdpath=${CDPATH/#:/.:}
+		_cdpath=${_cdpath//::/:.:}
+		_cdpath=${_cdpath/%:/:.}
+		for i in ${_cdpath//:/$'\n'}; do
+			if [[ $i -ef . ]]; then _skipdot=true; fi
+			k="${#COMPREPLY[@]}"
+			for j in $( compgen -d -- "$i/$cur" ); do
+				COMPREPLY[k++]=${j#$i/}		# cut off directory
+			done
+		done
+		$_skipdot || COMPREPLY+=( $(compgen -d -- "$cur") )
+		IFS=$' \t\n'
+	fi
+
+	# variable names if appropriate shell option set and no completions
+	if shopt -q cdable_vars && [[ ${#COMPREPLY[@]} -eq 0 ]]; then
+		COMPREPLY=( $(compgen -v -- "$cur") )
+	fi
+
+	# append slash to passed directory name that is the only completion.
+	# readline will not do this if we complete from CDPATH
+	if [[ ${#COMPREPLY[@]} -eq 1 ]]; then
+		i=${COMPREPLY[0]}	# shorthand
+		if [[ "$cur" == "$i" ]] && [[ "$i" != "*/" ]]; then
+			COMPREPLY[0]+=/
+		fi
+	fi
+	return 0
+}
+
+complete -o filenames -o nospace -o bashdefault -F _comp_cd cd
diff --git a/examples/complete/complete-examples b/examples/complete/complete-examples
new file mode 100644
index 0000000..8a0746d
--- /dev/null
+++ b/examples/complete/complete-examples
@@ -0,0 +1,512 @@
+#
+# Completion examples
+#
+#  Chet Ramey <chet.ramey@case.edu>
+#
+#  Copyright 2002 Chester Ramey
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   TThis program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software Foundation,
+#   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+#
+# This encapsulates the default bash completion code
+# call with the word to be completed as $1
+#
+# Since programmable completion does not use the bash default completions
+# or the readline default of filename completion when the compspec does
+# not generate any matches, this may be used as a `last resort' in a
+# completion function to mimic the default bash completion behavior.
+#
+_bash_def_completion ()
+{
+	local h t
+	COMPREPLY=()
+
+	# command substitution
+	if [[ "$1" == \$\(* ]]; then
+		t=${1#??}
+		COMPREPLY=( $(compgen -c -P '$(' $t) )
+	fi
+	# variables with a leading `${'
+	if [ ${#COMPREPLY[@]} -eq 0 ] && [[ "$1" == \$\{* ]]; then
+		t=${1#??}
+		COMPREPLY=( $(compgen -v -P '${' -S '}' $t) )
+	fi
+	# variables with a leading `$'
+	if [ ${#COMPREPLY[@]} -eq 0 ] && [[ "$1" == \$* ]]; then
+		t=${1#?}
+		COMPREPLY=( $(compgen -v -P '$' $t ) )
+	fi
+	# username expansion
+	if [ ${#COMPREPLY[@]} -eq 0 ] && [[ "$1" == ~* ]] && [[ "$1" != */* ]]; then
+		t=${1#?}
+		COMPREPLY=( $( compgen -u -P '~' $t ) )
+	fi
+	# hostname
+	if [ ${#COMPREPLY[@]} -eq 0 ] && [[ "$1" == *@* ]]; then
+		h=${1%%@*}
+		t=${1#*@}
+		COMPREPLY=( $( compgen -A hostname -P "${h}@" $t ) )
+	fi
+	# glob pattern
+	if [ ${#COMPREPLY[@]} -eq 0 ]; then
+		# sh-style glob pattern
+		if [[ $1 == *[*?[]* ]]; then
+			COMPREPLY=( $( compgen -G "$1" ) )
+		# ksh-style extended glob pattern - must be complete
+		elif shopt -q extglob && [[ $1 == *[?*+\!@]\(*\)* ]]; then
+			COMPREPLY=( $( compgen -G "$1" ) )
+		fi
+	fi
+
+	# final default is filename completion
+	if [ ${#COMPREPLY[@]} -eq 0 ]; then
+		COMPREPLY=( $(compgen -f "$1" ) )
+	fi
+}
+
+# 
+# Return 1 if $1 appears to contain a redirection operator.  Handles backslash
+# quoting (barely).
+#
+_redir_op()
+{
+	case "$1" in
+	*\\'[\<\>]'*)	return 1;;
+	*[\<\>]*)	return 0;;
+	*)		return 1;;
+	esac
+}
+
+
+# _redir_test tests the current word ($1) and the previous word ($2) for
+# redirection operators and does filename completion on the current word
+# if either one contains a redirection operator
+_redir_test()
+{
+	if _redir_op "$1" ; then
+		COMPREPLY=( $( compgen -f "$1" ) )
+		return 0
+	elif _redir_op "$2" ; then
+		COMPREPLY=( $( compgen -f "$1" ) )
+		return 0
+	fi
+	return 1
+}
+
+# optional, but without this you can't use extended glob patterns
+shopt -s extglob
+
+#
+# Easy ones for the shell builtins
+#
+# nothing for: alias, break, continue, dirs, echo, eval, exit, getopts,
+# let, logout, popd, printf, pwd, return, shift, suspend, test, times,
+# umask
+#
+
+complete -f -- . source
+complete -A enabled builtin
+complete -d cd
+
+# this isn't exactly right yet -- needs to skip shell functions and
+# do $PATH lookup (or do compgen -c and filter out matches that also
+# appear in compgen -A function)
+complete -c command
+
+# could add -S '=', but that currently screws up because readline appends
+# a space unconditionally
+
+complete -v export local readonly
+complete -A helptopic help	# currently same as builtins
+
+complete -d pushd
+
+complete -A shopt shopt
+
+complete -c type
+
+complete -a unalias
+complete -v unset 
+
+#
+# Job control builtins: fg, bg, disown, kill, wait
+# kill not done yet
+#
+
+complete -A stopped -P '%' bg
+complete -j -P '%' fg jobs disown
+
+# this is not quite right at this point
+
+_wait_func ()
+{
+	local cur
+	cur=${COMP_WORDS[COMP_CWORD]}
+
+	case "$cur" in
+	%*)	COMPREPLY=( $(compgen -A running -P '%' ${cur#?} ) ) ;;
+	[0-9]*)	COMPREPLY=( $(jobs -p | grep ^${cur}) ) ;;
+	*)	COMPREPLY=( $(compgen -A running -P '%') $(jobs -p) )
+		;;
+	esac
+}
+complete -F _wait_func wait
+
+#
+# more complicated things, several as yet unimplemented
+#
+
+#complete -F _bind_func bind
+
+_declare_func()
+{
+	local cur prev nflag opts
+
+	cur=${COMP_WORDS[COMP_CWORD]}
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	COMPREPLY=()
+	if (( $COMP_CWORD <= 1 )) || [[ $cur == '-' ]]; then
+		COMPREPLY=(-a -f -F -i -p -r -t -x)
+		return 0;
+	fi
+	if [[ $cur == '+' ]]; then
+		COMPREPLY=(+i +t +x)
+		return 0;
+	fi
+	if [[ $prev == '-p' ]]; then
+		COMPREPLY=( $(compgen -v $cur) )
+		return 0;
+	fi
+	return 1
+}
+complete -F _declare_func declare typeset
+
+_enable_func()
+{
+	local cur prev nflag opts
+
+	cur=${COMP_WORDS[COMP_CWORD]}
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	COMPREPLY=()
+	if (( $COMP_CWORD <= 1 )) || [[ $cur == '-' ]]; then
+		COMPREPLY=(-a -d -f -n -p -s)
+		return 0;
+	fi
+	if [[ $prev == '-f' ]]; then
+		COMPREPLY=( $( compgen -f $cur ) )
+		return 0;
+	fi
+	for opts in "${COMP_WORDS[@]}" ; do
+		if [[ $opts == -*n* ]]; then nflag=1; fi
+	done
+
+	if [ -z "$nflag" ] ; then
+		COMPREPLY=( $( compgen -A enabled $cur ) )
+	else
+		COMPREPLY=( $( compgen -A disabled $cur ) )
+	fi
+	return 0;
+}
+complete -F _enable_func enable
+
+_exec_func()
+{
+	local cur prev
+
+	cur=${COMP_WORDS[COMP_CWORD]}
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	if (( $COMP_CWORD <= 1 )) || [[ $cur == '-' ]]; then
+		COMPREPLY=(-a -c -l)
+		return 0;
+	fi
+	if [[ $prev != -*a* ]]; then
+		COMPREPLY=( $( compgen -c $cur ) )
+		return 0
+	fi
+	return 1;
+}
+complete -F _exec_func exec
+
+_fc_func()
+{
+	local cur prev
+
+	cur=${COMP_WORDS[COMP_CWORD]}
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	if (( $COMP_CWORD <= 1 )) || [[ $cur == '-' ]]; then
+		COMPREPLY=(-e -n -l -r -s)
+		return 0;
+	fi
+	if [[ $prev == -*e ]]; then
+		COMPREPLY=( $(compgen -c $cur) )
+		return 0
+	fi
+	return 1
+}
+complete -F _fc_func fc
+
+_hash_func()
+{
+	local cur prev
+
+	cur=${COMP_WORDS[COMP_CWORD]}
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	if (( $COMP_CWORD <= 1 )) || [[ $cur == '-' ]]; then
+		COMPREPLY=(-p -r -t)
+		return 0;
+	fi
+
+	if [[ $prev == '-p' ]]; then
+		COMPREPLY=( $( compgen -f $cur ) )
+		return 0;
+	fi
+	COMPREPLY=( $( compgen -c $cur ) )
+	return 0
+}
+complete -F _hash_func hash
+
+_history_func()
+{
+	local cur prev
+
+	cur=${COMP_WORDS[COMP_CWORD]}
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	COMPREPLY=()
+	if (( $COMP_CWORD <= 1 )) || [[ $cur == '-' ]]; then
+		COMPREPLY=(-a -c -d -n -r -w -p -s)
+		return 0;
+	fi
+	if [[ $prev == -[anrw] ]]; then
+		COMPREPLY=( $( compgen -f $cur ) )
+	fi
+	return 0
+}
+complete -F _history_func history
+
+#complete -F _read_func read
+
+_set_func ()
+{
+	local cur prev
+
+	cur=${COMP_WORDS[COMP_CWORD]}
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	COMPREPLY=()
+
+	_redir_test "$cur" "$prev" && return 0;
+
+	if (( $COMP_CWORD <= 1 )) || [[ $cur == '-' ]]; then
+		COMPREPLY=(-a -b -e -f -k -m -n -o -p -t -u -v -x -B -C -H -P --)
+		return 0;
+	fi
+	if [[ $cur == '+' ]]; then
+		COMPREPLY=(+a +b +e +f +k +m +n +o +p +t +u +v +x +B +C +H +P)
+		return 0;
+	fi
+	if [[ $prev == [+-]o ]]; then
+		COMPREPLY=( $(compgen -A setopt $cur) )
+		return 0;
+	fi
+	return 1;
+}
+complete -F _set_func set
+
+_trap_func ()
+{
+	local cur
+	cur=${COMP_WORDS[COMP_CWORD]}
+
+	if (( $COMP_CWORD <= 1 )) || [[ $cur == '-' ]]; then
+		COMPREPLY=(-l -p)
+		return 0;
+	fi
+	COMPREPLY=( $( compgen -A signal ${cur}) )
+	return 0
+}
+complete -F _trap_func trap
+
+#
+# meta-completion (completion for complete/compgen)
+#
+_complete_meta_func()
+{
+	local cur prev cmd
+	COMPREPLY=()
+
+	cmd=$1
+
+	cur=${COMP_WORDS[COMP_CWORD]}
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	_redir_test "$cur" "$prev" && return 0;
+
+	if (( $COMP_CWORD <= 1 )) || [[ "$cur" == '-' ]]; then
+		case "$cmd" in
+		complete) COMPREPLY=(-a -b -c -d -e -f -j -k -s -v -u -r -p -A -G -W -P -S -X -F -C);;
+		compgen)  COMPREPLY=(-a -b -c -d -e -f -j -k -s -v -u -A -G -W -P -S -X -F -C);;
+		esac
+		return 0
+	fi
+
+	if [[ $prev == -A ]]; then
+		COMPREPLY=(alias arrayvar binding builtin command directory \
+disabled enabled export file 'function' helptopic hostname job keyword \
+running service setopt shopt signal stopped variable)
+		return 0
+	elif [[ $prev == -F ]]; then
+		COMPREPLY=( $( compgen -A function $cur ) )
+	elif [[ $prev == -C ]]; then
+		COMPREPLY=( $( compgen -c $cur ) )
+	else
+		COMPREPLY=( $( compgen -c $cur ) )
+	fi
+	return 0
+}
+complete -F _complete_meta_func complete compgen
+
+#
+# some completions for shell reserved words
+#
+#complete -c -k time do if then else elif '{'
+
+#
+# external commands
+#
+
+complete -e printenv
+
+complete -c nohup exec nice eval trace truss strace sotruss gdb
+
+_make_targets ()
+{
+	local mdef makef gcmd cur prev i
+
+	COMPREPLY=()
+	cur=${COMP_WORDS[COMP_CWORD]}
+	prev=${COMP_WORDS[COMP_CWORD-1]}
+
+	# if prev argument is -f, return possible filename completions.
+	# we could be a little smarter here and return matches against
+	# `makefile Makefile *.mk', whatever exists
+	case "$prev" in
+	-*f)	COMPREPLY=( $(compgen -f $cur ) ); return 0;;
+	esac
+
+	# if we want an option, return the possible posix options
+	case "$cur" in
+	-)	COMPREPLY=(-e -f -i -k -n -p -q -r -S -s -t); return 0;;
+	esac
+
+	# make reads `makefile' before `Makefile'
+	# GNU make reads `GNUmakefile' before all other makefiles, but we
+	# check that we're completing `gmake' before checking for it
+	if [ -f GNUmakefile ] && [ ${COMP_WORDS[0]} == gmake ]; then
+		mdef=GNUmakefile
+	elif [ -f makefile ]; then
+		mdef=makefile
+	elif [ -f Makefile ]; then
+		mdef=Makefile
+	else
+		mdef=*.mk		# local convention
+	fi
+
+	# before we scan for targets, see if a makefile name was specified
+	# with -f
+	for (( i=0; i < ${#COMP_WORDS[@]}; i++ )); do
+		if [[ ${COMP_WORDS[i]} == -*f ]]; then
+			eval makef=${COMP_WORDS[i+1]}	# eval for tilde expansion
+			break
+		fi
+	done
+
+	[ -z "$makef" ] && makef=$mdef
+
+	# if we have a partial word to complete, restrict completions to
+	# matches of that word
+	if [ -n "$2" ]; then gcmd='grep "^$2"' ; else gcmd=cat ; fi
+
+	# if we don't want to use *.mk, we can take out the cat and use
+	# test -f $makef and input redirection	
+	COMPREPLY=( $(cat $makef 2>/dev/null | awk 'BEGIN {FS=":"} /^[^.# 	][^=]*:/ {print $1}' | tr -s ' ' '\012' | sort -u | eval $gcmd ) )
+}
+complete -F _make_targets -X '+($*|*.[cho])' make gmake pmake
+
+_umount_func ()
+{
+	COMPREPLY=( $(mount | awk '{print $1}') )
+}
+complete -F _umount_func umount
+
+_configure_func ()
+{
+	case "$2" in
+	-*)	;;
+	*)	return ;;
+	esac
+
+	case "$1" in
+	\~*)	eval cmd=$1 ;;
+	*)	cmd="$1" ;;
+	esac
+
+	COMPREPLY=( $("$cmd" --help | awk '{if ($1 ~ /--.*/) print $1}' | grep ^"$2" | sort -u) )
+}
+complete -F _configure_func configure
+
+complete -W '"${GROUPS[@]}"' newgrp
+
+complete -f chown ln more cat
+complete -d mkdir rmdir
+complete -f strip
+
+complete -f -X '*.gz' gzip
+complete -f -X '*.bz2' bzip2
+complete -f -X '*.Z' compress
+complete -f -X '!*.+(gz|tgz|Gz)' gunzip gzcat zcat zmore
+complete -f -X '!*.Z' uncompress zmore zcat
+complete -f -X '!*.bz2' bunzip2 bzcat
+complete -f -X '!*.zip' unzip
+complete -f -X '!*.+(gif|jpg|jpeg|GIF|JPG|JPEG|bmp)' xv
+
+complete -f -X '!*.pl' perl perl5
+
+complete -A hostname rsh telnet rlogin ftp ping xping host traceroute nslookup
+complete -A hostname rxterm rxterm3 rxvt2
+
+complete -u su
+complete -g newgrp groupdel groupmod
+
+complete -f -X '!*.+(ps|PS)' gs gv ghostview psselect pswrap
+complete -f -X '!*.+(dvi|DVI)' dvips xdvi dviselect dvitype catdvi
+complete -f -X '!*.+(pdf|PDF)' acroread4
+complete -f -X '!*.texi*' makeinfo texi2dvi texi2html
+complete -f -X '!*.+(tex|TEX)' tex latex slitex
+
+complete -f -X '!*.+(mp3|MP3)' mpg123
+complete -f -X '!*.+(htm|html)' links w3m lynx
+
+#
+# other possibilities, left as exercises
+#
+#complete -F _find_func find
+#complete -F _man_func man
+#complete -F _stty_func stty
diff --git a/examples/functions/array-stuff b/examples/functions/array-stuff
new file mode 100644
index 0000000..e6316c7
--- /dev/null
+++ b/examples/functions/array-stuff
@@ -0,0 +1,122 @@
+#
+#  Chet Ramey <chet.ramey@case.edu>
+#
+#  Copyright 1999 Chester Ramey
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   TThis program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software Foundation,
+#   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+# usage: reverse arrayname
+reverse()
+{
+	local -a R
+	local -i i
+	local rlen temp
+
+	# make r a copy of the array whose name is passed as an arg
+	eval R=\( \"\$\{$1\[@\]\}\" \)
+
+	# reverse R
+	rlen=${#R[@]}
+
+	for ((i=0; i < rlen/2; i++ ))
+	do
+		temp=${R[i]}
+		R[i]=${R[rlen-i-1]}
+		R[rlen-i-1]=$temp
+	done
+
+	# and assign R back to array whose name is passed as an arg
+	eval $1=\( \"\$\{R\[@\]\}\" \)
+}
+
+A=(1 2 3 4 5 6 7)
+echo "${A[@]}"
+reverse A
+echo "${A[@]}"
+reverse A
+echo "${A[@]}"
+
+# unset last element of A
+alen=${#A[@]}
+unset A[$alen-1]
+echo "${A[@]}"
+
+# ashift -- like shift, but for arrays
+
+ashift()
+{
+	local -a R
+	local n
+
+	case $# in
+	1)	n=1 ;;
+	2)	n=$2 ;;
+	*)	echo "$FUNCNAME: usage: $FUNCNAME array [count]" >&2
+		exit 2;;
+	esac
+
+	# make r a copy of the array whose name is passed as an arg
+	eval R=\( \"\$\{$1\[@\]\}\" \)
+
+	# shift R
+	R=( "${R[@]:$n}" )
+
+	# and assign R back to array whose name is passed as an arg
+	eval $1=\( \"\$\{R\[@\]\}\" \)
+}
+
+ashift A 2
+echo "${A[@]}"
+
+ashift A
+echo "${A[@]}"
+
+ashift A 7
+echo "${A[@]}"
+
+# Sort the members of the array whose name is passed as the first non-option
+# arg.  If -u is the first arg, remove duplicate array members.
+array_sort()
+{
+	local -a R
+	local u
+
+	case "$1" in
+	-u)	u=-u ; shift ;;
+	esac
+
+	if [ $# -eq 0 ]; then
+		echo "array_sort: argument expected" >&2
+		return 1
+	fi
+
+	# make r a copy of the array whose name is passed as an arg
+	eval R=\( \"\$\{$1\[@\]\}\" \)
+
+	# sort R
+	R=( $( printf "%s\n" "${A[@]}" | sort $u) )
+
+	# and assign R back to array whose name is passed as an arg
+	eval $1=\( \"\$\{R\[@\]\}\" \)
+	return 0
+}
+
+A=(3 1 4 1 5 9 2 6 5 3 2)
+array_sort A
+echo "${A[@]}"
+
+A=(3 1 4 1 5 9 2 6 5 3 2)
+array_sort -u A
+echo "${A[@]}"
diff --git a/examples/functions/array-to-string b/examples/functions/array-to-string
new file mode 100644
index 0000000..0d2fbe5
--- /dev/null
+++ b/examples/functions/array-to-string
@@ -0,0 +1,15 @@
+#! /bin/bash
+
+# Format: array_to_string vname_of_array vname_of_string separator
+array_to_string()
+{
+	(( ($# < 2) || ($# > 3) )) && {
+		 "$FUNCNAME: usage: $FUNCNAME arrayname stringname [separator]"
+		return 2
+	}
+
+	local array=$1 string=$2
+	((3==$#)) && [[ $3 = ? ]] && local IFS="${3}${IFS}"
+	eval $string="\"\${$array[*]}\""
+	return 0
+}
diff --git a/examples/functions/arrayops.bash b/examples/functions/arrayops.bash
new file mode 100644
index 0000000..d34353a
--- /dev/null
+++ b/examples/functions/arrayops.bash
@@ -0,0 +1,146 @@
+# arrayops.bash --- hide some of the nasty syntax for manipulating bash arrays
+# Author: Noah Friedman <friedman@splode.com>
+# Created: 2016-07-08
+# Public domain
+
+# $Id: arrayops.bash,v 1.3 2016/07/28 15:38:55 friedman Exp $
+
+# Commentary:
+
+# These functions try to tame the syntactic nightmare that is bash array
+# syntax, which makes perl's almost look reasonable.
+#
+# For example the apush function below lets you write:
+#
+#	apush arrayvar newval
+#
+# instead of
+#
+#	${arrayvar[${#arrayvar[@]}]}=newval
+#
+# Because seriously, you've got to be kidding me.
+
+# These functions avoid the use of local variables as much as possible
+# (especially wherever modification occurs) because those variable names
+# might shadow the array name passed in.  Dynamic scope!
+
+# Code:
+
+#:docstring apush:
+# Usage: apush arrayname val1 {val2 {...}}
+#
+# Appends VAL1 and any remaining arguments to the end of the array
+# ARRAYNAME as new elements.
+#:end docstring:
+apush()
+{
+    eval "$1=(\"\${$1[@]}\" \"\${@:2}\")"
+}
+
+#:docstring apop:
+# Usage: apop arrayname {n}
+#
+# Removes the last element from ARRAYNAME.
+# Optional argument N means remove the last N elements.
+#:end docstring:
+apop()
+{
+    eval "$1=(\"\${$1[@]:0:\${#$1[@]}-${2-1}}\")"
+}
+
+#:docstring aunshift:
+# Usage: aunshift arrayname val1 {val2 {...}}
+#
+# Prepends VAL1 and any remaining arguments to the beginning of the array
+# ARRAYNAME as new elements.  The new elements will appear in the same order
+# as given to this function, rather than inserting them one at a time.
+#
+# For example:
+#
+#	foo=(a b c)
+#	aunshift foo 1 2 3
+#       => foo is now (1 2 3 a b c)
+# but
+#
+#	foo=(a b c)
+#	aunshift foo 1
+#       aunshift foo 2
+#       aunshift foo 3
+#       => foo is now (3 2 1 a b c)
+#
+#:end docstring:
+aunshift()
+{
+    eval "$1=(\"\${@:2}\" \"\${$1[@]}\")"
+}
+
+#:docstring ashift:
+# Usage: ashift arrayname {n}
+#
+# Removes the first element from ARRAYNAME.
+# Optional argument N means remove the first N elements.
+#:end docstring:
+ashift()
+{
+    eval "$1=(\"\${$1[@]: -\${#$1[@]}+${2-1}}\")"
+}
+
+#:docstring aset:
+# Usage: aset arrayname idx newval
+#
+# Assigns ARRAYNAME[IDX]=NEWVAL
+#:end docstring:
+aset()
+{
+    eval "$1[\$2]=${@:3}"
+}
+
+#:docstring aref:
+# Usage: aref arrayname idx {idx2 {...}}
+#
+# Echoes the value of ARRAYNAME at index IDX to stdout.
+# If more than one IDX is specified, each one is echoed.
+#
+# Unfortunately bash functions cannot return arbitrary values in the usual way.
+#:end docstring:
+aref()
+{
+    eval local "v=(\"\${$1[@]}\")"
+    local x
+    for x in ${@:2} ; do echo "${v[$x]}"; done
+}
+
+#:docstring aref:
+# Usage: alen arrayname
+#
+# Echoes the length of the number of elements in ARRAYNAME.
+#
+# It also returns number as a numeric value, but return values are limited
+# by a maximum of 255 so don't rely on this unless you know your arrays are
+# relatively small.
+#:end docstring:
+alen()
+{
+    eval echo   "\${#$1[@]}"
+    eval return "\${#$1[@]}"
+}
+
+#:docstring anreverse:
+# Usage: anreverse arrayname
+#
+# Reverse the order of the elements in ARRAYNAME.
+# The array variable is altered by this operation.
+#:end docstring:
+anreverse()
+{
+    eval set $1 "\"\${$1[@]}\""
+    eval unset $1
+    while [ $# -gt 1 ]; do
+        eval "$1=(\"$2\" \"\${$1[@]}\")"
+        set $1 "${@:3}"
+    done
+}
+
+#provide arrayops
+
+# arrayops.bash ends here
diff --git a/examples/functions/autoload b/examples/functions/autoload
new file mode 100644
index 0000000..cb3a673
--- /dev/null
+++ b/examples/functions/autoload
@@ -0,0 +1,111 @@
+#
+# An almost ksh-compatible `autoload'.  A function declared as `autoload' will
+# be read in from a file the same name as the function found by searching the
+# $FPATH (which works the same as $PATH), then that definition will be run.
+#
+# To do this without source support, we define a dummy function that, when
+# executed, will load the file (thereby re-defining the function), then 
+# execute that newly-redefined function with the original arguments.
+#
+# It's not identical to ksh because ksh apparently does lazy evaluation
+# and looks for the file to load from only when the function is referenced.
+# This one requires that the file exist when the function is declared as
+# `autoload'.
+#
+# usage: autoload func [func...]
+#
+# The first cut of this was by Bill Trost, trost@reed.bitnet
+#
+# Chet Ramey
+# chet@ins.CWRU.Edu
+
+#
+# Declare a function ($1) to be autoloaded from a file ($2) when it is first
+# called.  This defines a `temporary' function that will `.' the file 
+# containing the real function definition, then execute that new definition with
+# the arguments given to this `fake' function.  The autoload function defined
+# by the file and the file itself *must* be named identically.
+#
+
+aload()
+{
+	eval $1 '() {  . '$2' ; '$1' "$@" ; return $? ; }'
+}
+
+#
+# Search $FPATH for a file the same name as the function given as $1, and
+# autoload the function from that file.  There is no default $FPATH.
+#
+
+autoload()
+{
+	#
+	# Save the list of functions; we're going to blow away the arguments
+	# in a second.  If any of the names contain white space, TFB.
+	#
+
+	local args="$*"
+
+	#
+	# This should, I think, list the functions marked as autoload and not
+	# yet defined, but we don't have enough information to do that here.
+	#
+	if [ $# -eq 0 ] ; then
+		echo "usage: autoload function [function...]" >&2
+		return 1
+	fi
+
+	#
+	# If there is no $FPATH, there is no work to be done
+	#
+
+	if [ -z "$FPATH" ] ; then
+		echo autoload: FPATH not set or null >&2
+		return 1
+	fi
+
+	#
+	# This treats FPATH exactly like PATH: a null field anywhere in the
+	# FPATH is treated the same as the current directory.
+	#
+	# The path splitting command is taken from Kernighan and Pike
+	#
+
+#	fp=$(echo $FPATH | sed 's/^:/.:/
+#				s/::/:.:/g
+#				s/:$/:./
+#				s/:/ /g')
+
+	# replaced with builtin mechanisms 2001 Oct 10
+
+	fp=${FPATH/#:/.:}
+	fp=${fp//::/:.:}
+	fp=${fp/%:/:.}
+	fp=${fp//:/ }
+
+	for FUNC in $args ; do
+		#
+		# We're blowing away the arguments to autoload here...
+		# We have to; there are no arrays (well, there are, but
+		# this doesn't use them yet).
+		#
+		set -- $fp
+
+		while [ $# -ne 0 ] ; do
+			if [ -f $1/$FUNC ] ; then
+				break			# found it! 
+			fi
+			shift
+		done
+
+		if [ $# -eq 0 ] ; then
+			echo "$FUNC: autoload function not found" >&2
+			continue
+		fi
+
+#		echo auto-loading $FUNC from $1/$FUNC
+		aload $FUNC $1/$FUNC
+	done
+
+	return 0
+}
diff --git a/examples/functions/autoload.v2 b/examples/functions/autoload.v2
new file mode 100644
index 0000000..e29c695
--- /dev/null
+++ b/examples/functions/autoload.v2
@@ -0,0 +1,192 @@
+#
+# An almost ksh-compatible `autoload'.  A function declared as `autoload' will
+# be read in from a file the same name as the function found by searching the
+# $FPATH (which works the same as $PATH), then that definition will be run.
+#
+# To do this without source support, we define a dummy function that, when
+# executed, will load the file (thereby re-defining the function), then 
+# execute that newly-redefined function with the original arguments.
+#
+# It's not identical to ksh because ksh apparently does lazy evaluation
+# and looks for the file to load from only when the function is referenced.
+# This one requires that the file exist when the function is declared as
+# `autoload'.
+#
+# usage: autoload [-pu] [func ...]
+#
+# options:
+#	-p	print in a format that can be reused as input
+#	-u	unset each function and remove it from the autoload list
+#
+# The first cut of this was by Bill Trost, trost@reed.edu
+#
+# Chet Ramey
+# chet@ins.CWRU.Edu
+
+unset _AUTOLOADS
+_aindex=0
+
+#
+# Declare a function ($1) to be autoloaded from a file ($2) when it is first
+# called.  This defines a `temporary' function that will `.' the file 
+# containing the real function definition, then execute that new definition with
+# the arguments given to this `fake' function.  The autoload function defined
+# by the file and the file itself *must* be named identically.
+#
+
+_aload()
+{
+	eval $1 '() {  . '$2' ; '$1' "$@" ; return $? ; }'
+	_autoload_addlist "$1"
+}
+
+_autoload_addlist()
+{
+	local i=0
+
+	while (( i < $_aindex )); do
+		case "${_AUTOLOADS[i]}" in
+		"$1")	return 1 ;;
+		esac
+		(( i += 1 ))
+	done
+	_AUTOLOADS[_aindex]="$1"
+	(( _aindex += 1 ))
+	return 0
+}
+
+_autoload_dump()
+{
+	local func
+
+	for func in ${_AUTOLOADS[@]}; do
+		[ -n "$1" ] && echo -n "autoload "
+		echo "$func"
+	done
+}
+
+# Remove $1 from the list of autoloaded functions
+_autoload_remove_one()
+{
+	local i=0 nnl=0
+	local -a nlist
+
+	while (( i < _aindex )); do
+		case "${_AUTOLOADS[i]}" in
+		"$1")	;;
+		*)	nlist[nnl]="${_AUTOLOADS[i]}" ; (( nnl += 1 ));;
+		esac
+		(( i += 1 ))
+	done
+	unset _AUTOLOADS _aindex
+	eval _AUTOLOADS=( ${nlist[@]} )
+	_aindex=$nnl
+}
+
+# Remove all function arguments from the list of autoloaded functions
+_autoload_remove()
+{
+	local func i es=0
+	
+	# first unset the autoloaded functions
+	for func; do
+		i=0
+		while (( i < _aindex )); do
+			case "${_AUTOLOADS[i]}" in
+			"$func")	unset -f $func ; break ;;
+			esac
+			(( i += 1 ))
+		done
+		if (( i == _aindex )); then
+			echo "autoload: $func: not an autoloaded function" >&2
+			es=1
+		fi
+	done
+
+	# then rebuild the list of autoloaded functions
+	for func ; do
+		_autoload_remove_one "$func"
+	done
+
+	return $es
+}
+
+#
+# Search $FPATH for a file the same name as the function given as $1, and
+# autoload the function from that file.  There is no default $FPATH.
+#
+
+autoload()
+{
+	local -a fp
+	local _autoload_unset nfp i
+
+	if (( $# == 0 )) ; then
+		_autoload_dump
+		return 0
+	fi
+
+	OPTIND=1
+	while getopts pu opt
+	do
+		case "$opt" in
+		p)	_autoload_dump printable; return 0;;
+		u)	_autoload_unset=y ;;
+		*)	echo "autoload: usage: autoload [-pu] [function ...]" >&2
+			return 1 ;;
+		esac
+	done
+
+	shift $(( $OPTIND - 1 ))
+
+	if [ -n "$_autoload_unset" ]; then
+		_autoload_remove "$@"
+		return $?
+	fi
+
+	#
+	# If there is no $FPATH, there is no work to be done
+	#
+
+	if [ -z "$FPATH" ] ; then
+		echo "autoload: FPATH not set or null" >&2
+		return 1
+	fi
+
+	#
+	# This treats FPATH exactly like PATH: a null field anywhere in the
+	# FPATH is treated the same as the current directory.
+	#
+	# This turns $FPATH into an array, substituting `.' for `'
+	#
+	eval fp=( $(
+			IFS=':'
+			set -- ${FPATH}
+			for p in "$@" ; do echo -n "${p:-.} "; done
+		   )
+		)
+
+	nfp=${#fp[@]}
+
+	for FUNC ; do
+		i=0;
+		while (( i < nfp )) ; do
+			if [ -f ${fp[i]}/$FUNC ] ; then
+				break			# found it! 
+			fi
+			(( i += 1 ))
+		done
+
+		if (( i == nfp )) ; then
+			echo "autoload: $FUNC: autoload function not found" >&2
+			es=1
+			continue
+		fi
+
+#		echo auto-loading $FUNC from ${fp[i]}/$FUNC
+		_aload $FUNC ${fp[i]}/$FUNC
+		es=0
+	done
+
+	return $es
+}
diff --git a/examples/functions/autoload.v3 b/examples/functions/autoload.v3
new file mode 100644
index 0000000..b1e5dfe
--- /dev/null
+++ b/examples/functions/autoload.v3
@@ -0,0 +1,125 @@
+#From: Mark Kennedy <mark.t.kennedy@gmail.com> (<mtk@ny.ubs.com>)
+#Message-ID: <35E2B899.63A02DF5@ny.ubs.com>
+#Date: Tue, 25 Aug 1998 09:14:01 -0400
+#To: chet@nike.ins.cwru.edu
+#Subject: a newer version of the ksh-style 'autoload'
+
+#enclosed you'll find 'autoload.v3',  a version of the autoloader
+#that emulates the ksh semantics of delaying the resolution (and loading) of the function
+#until its first use.  i took the liberty of simplifying the code a bit although it still uses the
+#same functional breakdown.  i recently went through the exercise of converting
+#my ksh-based environment to bash (a very, very pleasant experience)
+#and this popped out.
+
+# the psuedo-ksh autoloader.
+
+# The first cut of this was by Bill Trost, trost@reed.bitnet.
+# The second cut came from Chet Ramey, chet@ins.CWRU.Edu
+# The third cut came from Mark Kennedy, mtk@ny.ubs.com.  1998/08/25
+
+unset _AUTOLOADS
+
+_aload()
+{
+    local func
+    for func; do
+	eval $func '()
+		{
+		    local f=$(_autoload_resolve '$func')
+		    if [[ $f ]]; then
+			. $f
+			'$func' "$@"
+			return $?
+		    else
+			return 1
+		    fi
+		}'
+	_autoload_addlist $func
+    done
+}
+
+_autoload_addlist()
+{
+	local func
+
+	for func in ${_AUTOLOADS[@]}; do
+	    [[ $func = "$1" ]] && return
+	done
+
+	_AUTOLOADS[${#_AUTOLOADS[@]}]=$1
+}
+
+_autoload_dump()
+{
+    local func
+
+    for func in ${_AUTOLOADS[@]}; do
+	[[ $1 ]] && echo -n "autoload "
+	echo $func
+    done
+}
+
+_autoload_remove_one()
+{
+    local func
+    local -a NEW_AUTOLOADS
+
+    for func in ${_AUTOLOADS[@]}; do
+	[[ $func != "$1" ]] && NEW_AUTOLOADS[${#NEW_AUTOLOADS[@]}]=$func
+    done
+
+    _AUTOLOADS=( ${NEW_AUTOLOADS[@]} )
+}
+
+_autoload_remove()
+{
+    local victim func
+
+    for victim; do
+	for func in ${_AUTOLOADS[@]}; do
+	    [[ $victim = "$func" ]] && unset -f $func && continue 2
+	done
+	echo "autoload: $func: not an autoloaded function" >&2
+    done
+
+    for func; do
+	    _autoload_remove_one $func
+    done
+}
+
+_autoload_resolve()
+{
+    if [[ ! "$FPATH" ]]; then
+	    echo "autoload: FPATH not set or null" >&2
+	    return
+    fi
+
+    local p
+
+    for p in $( (IFS=':'; set -- ${FPATH}; echo "$@") ); do
+	p=${p:-.}
+	if [ -f $p/$1 ]; then echo $p/$1; return; fi
+    done
+
+    echo "autoload: $1: function source file not found" >&2
+}
+
+autoload()
+{
+    if (( $# == 0 )) ; then _autoload_dump; return; fi
+
+    local opt OPTIND
+
+    while getopts pu opt
+    do
+	case $opt in
+	    p) _autoload_dump printable; return;;
+	    u) shift $((OPTIND-1)); _autoload_remove "$@"; return;; 
+	    *) echo "autoload: usage: autoload [-pu] [function ...]" >&2; return;;
+	esac
+    done
+
+    shift $(($OPTIND-1))
+
+    _aload "$@"
+}
diff --git a/examples/functions/autoload.v4 b/examples/functions/autoload.v4
new file mode 100644
index 0000000..7f60563
--- /dev/null
+++ b/examples/functions/autoload.v4
@@ -0,0 +1,556 @@
+## -*- sh -*-
+
+# The psuedo-ksh autoloader.
+
+# How to use:
+# o One function per file.
+# o File and function name match exactly.
+# o File is located in a directory that is in FPATH.
+# o This script (autoload) must be sourced in as early as possible. This
+#   implies that any code in this script should NOT rely on any library of local
+#   or self-defined functions having already been loaded.
+# o autoload must be called for each function before the function can be used. If
+#   autoloads are in directories where there are nothing but autoloads, then
+#   'autoload /path/to/files/*' suffices (but see options -a and -f).
+# o The call must be made in the current environment, not a subshell.
+# o The command line suffices as "current environment". If you have autoload
+#   calls in a script, that script must be dotted into the process.
+
+# The first cut of this was by Bill Trost, trost@reed.bitnet.
+# The second cut came from Chet Ramey, chet@ins.CWRU.Edu
+# The third cut came from Mark Kennedy, mtk@ny.ubs.com.  1998/08/25
+# The fourth cut came from Matthew Persico, matthew.persico@gmail.com 2017/August
+
+autoload_calc_shimsize ()
+{
+    echo $((AUTOLOAD_SHIM_OVERHEAD + 3 * ${#1}))
+}
+
+_autoload_split_fpath ()
+{
+    (IFS=':'; set -- ${FPATH}; echo "$@")
+}
+
+_aload()
+{
+    local opt OPTIND
+    local doexport=0
+    local doreload=0
+    local doverbose=0
+    local doevalshim=0
+    local loadthese
+    local optimize=0
+    local loaded=0
+    local exported=0
+    local optimized=0
+    local summary=0
+    local dofpath=0
+    while getopts xrvla:oyf opt; do
+        case $opt in
+            x) doexport=1;;
+            r) doreload=1;;
+            v) doverbose=1;;
+            l) doevalshim=1;;
+            a) loadthese=$(find $OPTARG -maxdepth 1 -type f -printf '%f ');;
+            o) optimize=1;;
+            y) summary=1;;
+            f) loadthese=$(find $(_autoload_split_fpath) -maxdepth 1 -type f -printf '%f ');;
+            *) echo "_aload: usage: _aload [-xrvlyf] [-a dir] [function ...]" >&2; return;;
+        esac
+    done
+
+    shift $(($OPTIND-1))
+
+    [ -z "$loadthese" ] && loadthese="$@"
+
+    local func
+    for func in $loadthese; do
+        local exists_fn
+        exists_fn=$(declare -F $func)
+        if [ -n "$exists_fn" ] && ((doreload==0)) && ((doevalshim==0))
+        then
+            if ((doverbose))
+            then
+                echo "autoload: function '$func' already exists"
+            fi
+        else
+            local andevaled=''
+            local andexported=''
+            local evalstat=0
+            local doshim=1
+            local funcfile
+            funcfile=$(_autoload_resolve $func)
+            if [[ $funcfile ]] ; then
+                ## The file was found for $func. Process it.
+
+                if ((optimize)); then
+                    ## For the first function loaded, we will not know
+                    ## AUTOLOAD_SHIM_OVERHEAD. We can only calculate it after
+                    ## we have loaded one function.
+                    if [[ $AUTOLOAD_SHIM_OVERHEAD ]]; then
+                        local size=$(wc -c $funcfile| sed 's/ .*//')
+                        local shimsize=$(autoload_calc_shimsize $func)
+                        if (( size <= shimsize)); then
+                            doshim=0
+                            andevaled=', optimized'
+                            ((optimized+=1))
+                        fi
+                    fi
+                fi
+
+                if ((doevalshim)); then
+                    doshim=0
+                    andevaled=', evaled'
+                fi
+
+                ## 'brand' as in branding a cow with a mark. We add a local
+                ## variable to each function we autoload so that we can tell
+                ## later on it is an autoloaded function without having to
+                ## maintain some bash array or hash that cannot be passed to
+                ## and used by subshells.
+                local brandtext
+                brandtext="eval \"\$(type $func | sed -e 1d -e 4ilocal\\ AUTOLOADED=\'$func\')\""
+                if ((doshim)); then
+                    ## Don't bother trying to save space by shoving all the
+                    ## eval text below onto one unreadable line; new lines will
+                    ## be added at your semicolons and any indentation below
+                    ## seems to be ignored anyway if you export the function;
+                    ## look at its BASH_FUNCTION representation.
+                    eval $func '()
+                    {
+                    local IS_SHIM="$func"
+                    local file=$(_autoload_resolve '$func')
+                    if [[ $file ]]
+                    then
+                        . $file
+                        '$brandtext'
+                        '$func' "$@"
+                        return $?
+                    else
+                        return 1;
+                    fi
+                    }'
+                else
+                    . $funcfile
+                    eval "$brandtext"
+                fi
+                evalstat=$?
+                if((evalstat==0))
+                then
+                    ((loaded+=1))
+                    ((doexport)) && export -f $func && andexported=', exported' && ((exported+=1))
+                    ((doverbose)) && echo "$func autoloaded${andexported}${andevaled}"
+                    if [[ ! $AUTOLOAD_SHIM_OVERHEAD ]] && ((doshim)); then
+                        ## ...we have just loaded the first function shim into
+                        ## memory. Let's calc the AUTOLOAD_SHIM_OVERHEAD size
+                        ## to use going forward. In theory, we could check
+                        ## again here to see if we should optimize and source
+                        ## in this function, now that we now the
+                        ## AUTOLOAD_SHIM_OVERHEAD. In practice, it's not worth
+                        ## duping that code or creating a function to do so for
+                        ## one function.
+                        AUTOLOAD_SHIM_OVERHEAD=$(type $func | grep -v -E "^$1 is a function" | sed "s/$func//g"| wc -c)
+                        export AUTOLOAD_SHIM_OVERHEAD
+                    fi
+                else
+                    echo "$func failed to load" >&2
+                fi
+            fi
+        fi
+    done
+    ((summary)) && echo "autoload: loaded:$loaded exported:$exported optimized:$optimized overhead:$AUTOLOAD_SHIM_OVERHEAD bytes"
+}
+
+_autoload_dump()
+{
+    local opt OPTIND
+    local opt_p=''
+    local opt_s=''
+    while getopts ps opt
+    do
+        case $opt in
+            p ) opt_p=1;;
+            s ) opt_s=1;;
+        esac
+    done
+
+    shift $(($OPTIND-1))
+
+    local exported=''
+    local executed=''
+    local func
+    for func in $(declare | grep -E 'local\\{0,1} AUTOLOADED' | sed -e "s/.*AUTOLOADED=//" -e 's/\\//g' -e 's/[");]//g' -e "s/'//g")
+    do
+        if [ -n "$opt_p" ]; then echo -n "autoload "; fi
+        if [ -n "$opt_s" ]
+        then
+            exported=$(declare -F | grep -E "${func}$" | sed 's/declare -f\(x\{0,1\}\).*/\1/')
+            [ "$exported" = 'x' ] && exported=' exported' || exported=' not exported'
+            executed=$(type $func | grep 'local IS_SHIM')
+            [ -z "$executed" ] && executed=' executed' || executed=' not executed'
+        fi
+        echo "${func}${exported}${executed}"
+    done
+}
+
+_autoload_resolve()
+{
+    if [[ ! "$FPATH" ]]; then
+        echo "autoload: FPATH not set or null" >&2
+        return
+    fi
+
+    local p # for 'path'. The $() commands in the for loop split the FPATH
+            # string into its constituents so that each one may be processed.
+
+    for p in $( _autoload_split_fpath ); do
+        p=${p:-.}
+        if [ -f $p/$1 ]; then echo $p/$1; return; fi
+    done
+
+    echo "autoload: $1: function source file not found" >&2
+}
+
+_autoload_edit()
+{
+    [ -z "$EDITOR" ] && echo "Error: no EDITOR defined" && return 1
+    local toedit
+    local func
+    for func in "$@"
+    do
+        local file=$(_autoload_resolve $func)
+        if [[ $file ]]
+        then
+            toedit="$toedit $file"
+        else
+            echo "$funcname not found in FPATH funcfile. Skipping."
+        fi
+    done
+
+    [ -z "$toedit" ] && return 1
+
+    local timemarker=$(mktemp)
+
+    $EDITOR $toedit
+
+    local i
+    for i in $toedit
+    do
+        if [ $i -nt $timemarker ]
+        then
+            local f=$(basename $i)
+            echo Reloading $f
+            autoload -r $f
+        fi
+    done
+}
+
+_autoload_page()
+{
+    [ -z "$PAGER" ] && echo "Error: no PAGER defined" && return 1
+    local topage
+    local func
+    for func in "$@"
+    do
+        local file=$(_autoload_resolve $func)
+        if [[ $file ]]
+        then
+            topage="$topage $file"
+        else
+            echo "$funcname not found in FPATH funcfile. Skipping."
+        fi
+    done
+
+    [ -z "$topage" ] && return 1
+
+    $PAGER $topage
+}
+
+_autoload_remove()
+{
+    unset -f "$@"
+}
+
+_autoload_help()
+{
+    cat <<EOH
+NAME
+        autoload
+
+SYNOPSIS
+        autoload [-ps]
+        autoload [-xuremloyv] [function ...]
+        autoload -a directory [-oyv]
+        autoload -f [-oyv]
+        autoload [-h]
+
+        autoreload [function ...]
+
+DESCRIPTION
+
+        An implementation of the 'autoload' functionality built into other
+        shells, of which 'ksh' is the most prominent.  It allows for a keeping
+        the process environment small by loading small 'shim' functions into
+        memory that will, on first call, load the full text of the given
+        function and run it. Subsequent calls to the function just run the
+        function.
+
+        'autoreload' is a synonym for 'autoload -r'. See below.
+
+USAGE
+
+        o Each function to be autoloaded should be defined in a single file,
+          named exactly the same as the function.
+
+        o In order to avoid side effects, do NOT put code other than the
+          function definition in the file. Unless of course you want to do some
+          one-time initialization. But beware that if you reload the function
+          for any reason, you will rerun the initialization code. Make sure
+          your initialization is re-entrant. Or, better yet,
+
+          *** do NOT put code other than the function definition in the file ***
+
+        o These function definition files should be placed in a directory that
+          is in the FPATH environment variable. Subdirectories are NOT scanned.
+
+        o The autoload script should be sourced into the current process as
+          early as possible in process start up. See NOTES below for
+          suggestions.
+
+        o The calls to the autoload function must be made in the current
+          process. If your calls are in their own script, that script must be
+          sourced in. Command line invocations are also sufficient. (But see
+          '-l' below.)
+
+        o The first time the function is called, the shim function that was
+          created by the 'autoload' call is what is executed. This function
+          then goes and finds the appropriate file in FPATH, sources it in and
+          then calls the actual function with any arguments you just passed in
+          to the shim function. Subsequent calls just run the function.
+
+OPTIONS
+
+        -a Autoload (a)ll the functions found in the given directory.
+
+        -f Autoload all the functions found in all the directories on the
+           FPATH.
+
+        -p Print all the autoloaded functions.
+
+        -s Print all the autoloaded functions and add their export status.
+
+        -x Export the specified functions to the environment for use in
+           subshells.
+
+        -u Unset the function, so it can be reloaded.
+
+        -r Reload the shims of the specified functions, even if the functions
+           have been already been executed.  This will allow you to modify the
+           functions' source and have the new version executed next time the
+           function is called.
+
+           It would be very easy to modify a function's script, run the
+           function and scratch your head for a long time trying to figure out
+           why your changes are not being executed. That's why we provide the
+           '-e' flag described below for modifications.
+
+           Reloads, of course, only apply in the context of the current session
+           and any future subshell you start from the current session. Existing
+           sessions will need to have the same 'autoload -r' command run in
+           them.
+
+        -e Find the scripts in which the specified functions are defined and
+           start up \$EDITOR on those scripts. Reload the ones that were
+           modified when you exit \$EDITOR. (Note: If you use 'autoload -e foo'
+           to edit function 'foo', and then in your editor you separately load
+           up function 'bar', 'autoload' has no way of knowing that you edited
+           'bar' and will NOT reload 'bar' for you.)
+
+           Reloads, of course, only apply in the context of the current session
+           and any future subshell you start from the current session. Existing
+           sessions will need to have the same 'autoload -r' command run in
+           them.
+
+        -m Find the scripts in which the specified functions are defined and
+           run \$PAGER on them ('m' is for 'more', because 'p' (page) and 'l'
+           (load) are already used as options in 'autoload').
+
+        -l When autoloading a function, eval the shim immediately in order to
+           load the true function code. See "Using '-l'" in the NOTES below for
+           details.
+
+        -o Optimize. When autoloading, take the time to execute
+
+               'theCharCount=\$(wc -c \$theFuncFile)'
+
+           for each function and
+
+                if \$theCharCount < \$AUTOLOAD_SHIM_OVERHEAD
+
+           don't shim it, just eval directly.
+
+        -y Summar(y). Print the number of loaded, exported and optimized
+           functions.
+
+        -v Turns up the chattiness.
+
+NOTES
+
+        o Calling 'autoload' on a function that already exists (either shimmed
+          or expanded) silently ignores the request to load the shim unless it
+          has been previously removed (-u) or you force the reload (-r).
+
+        o Changing and reloading a function that has been exported does not
+          require it be re-exported; the modifications will appear in
+          subsequent subshells.
+
+        o Using '-1'
+
+          If you are running under set -x and/or set -v, you may see that the
+          shim does not appear to "work"; instead of seeing the shim first and
+          the real code subsequently, you may see the shim evaluated multiple
+          times.
+
+          This may not be an error; review your code. What is most likely
+          happening is that you are calling the function in subshells via
+          backticks or $(), or in a script that is not being sourced into the
+          current environment. If you have not previously called the function
+          in question at your command line or in a script that was sourced into
+          the current environment, then the various subshells are going to
+          encounter the shim and replace with the real code before executing.
+
+          Remember, however, that environment modifications that occur in a
+          subshell are NOT propagated back to the calling shell or over to any
+          sibling shells. So, if you call an autoloaded function in a very
+          tight loop of very many subshells, you may want to make an 'autoload
+          -l' call before you start your loop. '-l' will instruct 'autoload' to
+          bypass the shim creation and just source in the function's file
+          directly. For a few calls, the overhead of repeatedly running the
+          shim is not expensive, but in a tight loop, it might be. Caveat
+          Programer.
+
+        o Although the number of functions in the environment does not change
+          by using 'autoload', the amount of memory they take up can be greatly
+          reduced, depending on the size of your functions. If you have a lot
+          of small functions, then it is possible that the shim text will be
+          larger than your actual functions, rendering the memory savings moot.
+
+          'small' in this case can be determined by calling the function
+          'autoload_calc_shimsize' with the name of the function to determine
+          its shim size.
+
+        o In order to support the -p and -s options, we need a way to determine
+          if a function 'func' has been autoloaded or if it was loaded
+          diredctly. In order to do that, we modify the function's code by
+          adding the text
+
+              local  AUTOLOADED='func';
+
+          to the shim and to the actual function text, just after the opening
+          brace. Then supporting -p and -s is just a matter of grepping through
+          all the function text in memory. Even though grepping through the
+          environment may not be the most efficient way to support this, it is
+          the simplest to implement for -p and -s operations that are not
+          heavily used.
+
+          As a consquence of this (and other reasons), the AUTOLOAD* namespace
+          is reserved for autoloading. Make sure you check any functions that
+          you bring under autoload for use of variables or functions that start
+          with AUTOLOAD and change them.
+
+        o The easiest way to load shims for all functions on the FPATH is to run
+
+               autoload -f -x
+
+          in the profile that gets run for login shells.
+
+          When called in the profile of a login shell where no definitions
+          exist, -f will load all functions it can find on FPATH and -x will
+          export all of those functions to be available in subshells when this
+          is called in a login shell. Using this option will relieve you of the
+          need to call 'autoload' after Every Single Function Definition, nor
+          will you need to call it in subshells.
+
+          The only thing left to do is to load up the autoload function itself
+          and its helper functions. That needs to happen in your profile:
+
+            export FPATH=~/functions       # or wherever you stash them
+            if [ -z $(declare -F autoload) ]
+            then
+              . ~/bin/autoload             # or wherever you've put it
+            fi
+
+          The 'if' statement is used to make sure we don't reload autoload
+          needlessly. Sourcing in the autoload script loads the 'autoload'
+          function and all of its support functions. Additionally, we export
+          all of these functions so that they are available in subshells; you
+          do not have to re-source the autoload file in '.bashrc'.
+
+        o Even with all of these shenanigans, you will find cases where no
+          matter how hard you try, your autoloaded functions will be
+          unavailable to you, even if you run 'autoload -x -f'. The typical
+          condition for this is starting up not a subshell, but a brand new
+          DIFFERENT shell. And the typical example of this is git extensions.
+
+          At the time of this writing, git extensions work by taking a command
+          'git foo' and looking for a file 'git-foo' on the path. 'git' then
+          executes 'git-foo' in a new shell - it executes your command in
+          /bin/sh. That's not a subshell of your process. It will not get your
+          exported shell functions. Ballgame over.
+
+          If you find that you want your functions to be available in such
+          circumstances, convert them back to plain old scripts, make sure they
+          are 'sh' compliant and take the read/parse hit every time they are
+          run.
+
+EOH
+}
+
+autoload()
+{
+    if (( $# == 0 )) ; then _autoload_dump; return; fi
+
+    local opt OPTIND OPTARG
+    local passthru
+    local dumpopt
+    while getopts psuema:yxrvlohf opt
+    do
+        case $opt in
+            p|s) dumpopt="$dumpopt -${opt}";;
+            u) shift $((OPTIND-1)); _autoload_remove "$@"; return;;
+            e) shift $((OPTIND-1)); _autoload_edit "$@"; return;;
+            m) shift $((OPTIND-1)); _autoload_page "$@"; return;;
+            x|r|v|l|y|f|o) passthru="$passthru -$opt";;
+            a) passthru="$passthru -$opt $OPTARG";;
+            h) _autoload_help; return;;
+            *) echo "autoload: usage: autoload [-puUx] [function ...]" >&2; return;;
+        esac
+    done
+
+    shift $(($OPTIND-1))
+    if [ -n "$dumpopt" ]
+    then
+        _autoload_dump $dumpopt
+    else
+        _aload $passthru "$@"
+    fi
+}
+
+autoreload ()
+{
+    autoload -r "$@"
+}
+
+## When we source in autoload, we export (but NOT autoload) the autoload
+## functions so that they are available in subshells and you don't have to
+## source in the autoload file in subshells.
+export -f _aload \
+       _autoload_dump \
+       _autoload_edit \
+       _autoload_help \
+       _autoload_page \
+       _autoload_resolve \
+       _autoload_split_fpath \
+       autoload \
+       autoload_calc_shimsize \
+       autoreload
diff --git a/examples/functions/autoload.v4.t b/examples/functions/autoload.v4.t
new file mode 100644
index 0000000..6d35d14
--- /dev/null
+++ b/examples/functions/autoload.v4.t
@@ -0,0 +1,184 @@
+#!/bin/bash
+
+workdir=$(mktemp -d)
+
+cp autoload $workdir
+
+cd $workdir
+pwd
+
+. ./autoload
+
+funclist='ALTEST_func1 ALTEST_funcexport ALTEST_funcu'
+for funcname in $funclist; do
+    cat <<EOFFUNC > $funcname
+$funcname ()
+{
+echo this is $funcname
+
+}
+EOFFUNC
+
+done
+
+export FPATH=$workdir
+
+autoload ALTEST_func1 ALTEST_funcu
+autoload -x ALTEST_funcexport
+
+ok=0
+failed=0
+
+for funcname in $funclist; do
+
+    testname="$funcname loaded"
+    got=$(type $funcname 2>&1)
+    if [[ $got =~ "$funcname: not found" ]]; then
+        echo "## Failed $testname"
+        ((failed+=1))
+    else
+        echo "ok - $testname"
+        ((ok+=1))
+
+        testname="$funcname is a shim"
+        if [[ ! $got =~ "IS_SHIM" ]]; then
+            echo "## Failed $testname"
+            ((failed+=1))
+        else
+            echo "ok - $testname"
+            ((ok+=1))
+
+            testname="$funcname shim executed"
+            $funcname > /dev/null
+            got=$(type $funcname 2>&1)
+            if [[ $got =~ "IS_SHIM" ]]; then
+                echo "## Failed $testname"
+                ((failed+=1))
+            else
+                echo "ok - $testname"
+                ((ok+=1))
+            fi
+        fi
+    fi
+done
+
+funcname=ALTEST_func1
+testname="$funcname shim reloaded"
+autoload -r $funcname
+got=$(type $funcname 2>&1)
+if [[ ! $got =~ "IS_SHIM" ]]; then
+    echo "## Failed $testname"
+    ((failed+=1))
+else
+    echo "ok - $testname"
+    ((ok+=1))
+fi
+
+funcname=ALTEST_funcu
+testname="$funcname shim unloaded"
+autoload -u $funcname
+got=$(type $funcname 2>&1)
+if [[ ! $got =~ "$funcname: not found" ]]; then
+    echo "## Failed $testname"
+    ((failed+=1))
+else
+    echo "ok - $testname"
+    ((ok+=1))
+fi
+
+testname="autoload -p"
+got=$(autoload -p | grep ALTEST)
+if [[ ! $got =~ "autoload ALTEST_func1" ]] || \
+       [[ ! $got =~ "autoload ALTEST_funcexport" ]] ; then
+echo "## Failed $testname"
+    ((failed+=1))
+else
+    echo "ok - $testname"
+    ((ok+=1))
+fi
+
+testname="autoload -s"
+echo "Executing $testname, could take a long time..."
+got=$(autoload -s | grep ALTEST)
+if [[ ! $got =~ "ALTEST_func1 not exported not executed" ]] || \
+       [[ ! $got =~ "ALTEST_funcexport exported executed" ]] ; then
+    echo "## Failed $testname"
+    echo "##    got: $got"
+    ((failed+=1))
+else
+    echo "ok - $testname"
+    ((ok+=1))
+fi
+
+testname="autoload -r -a $FPATH"
+autoload -r -a $FPATH
+localfailed=0
+localok=0
+for funcname in $funclist; do
+    got=$(type $funcname 2>&1)
+    if [[ $got =~ "$funcname: not found" ]]; then
+        echo "## Failed $testname - $funcname"
+        ((localfailed+=1))
+    else
+        ((localok+=1))
+        if [[ ! $got =~ "IS_SHIM" ]]; then
+            ((localfailed+=1))
+        else
+            ((localok+=1))
+        fi
+    fi
+done
+if ((localfailed==0)); then
+    echo "ok - $testname"
+    ((ok+=1))
+else
+    ((failed+=1))
+fi
+
+testname="autoload -u $funclist"
+autoload -u $funclist
+localfailed=0
+localok=0
+for funcname in $funclist; do
+    got=$(type $funcname 2>&1)
+    if [[ ! $got =~ "$funcname: not found" ]]; then
+        echo "## Failed $testname - $funcname"
+        ((localfailed+=1))
+    else
+        ((localok+=1))
+    fi
+done
+if ((localfailed==0)); then
+    echo "ok - $testname"
+    ((ok+=1))
+else
+    ((failed+=1))
+fi
+
+testname="autoload -r -f"
+autoload -r -f
+localfailed=0
+localok=0
+for funcname in $funclist; do
+    got=$(type $funcname 2>&1)
+    if [[ $got =~ "$funcname: not found" ]]; then
+        echo "## Failed $testname - $funcname"
+        ((localfailed+=1))
+    else
+        ((localok+=1))
+        if [[ ! $got =~ "IS_SHIM" ]]; then
+            ((localfailed+=1))
+        else
+            ((localok+=1))
+        fi
+    fi
+done
+if ((localfailed==0)); then
+    echo "ok - $testname"
+    ((ok+=1))
+else
+    ((failed+=1))
+fi
+
+echo $ok passed, $failed failed
+exit $failed
diff --git a/examples/functions/basename b/examples/functions/basename
new file mode 100644
index 0000000..a541349
--- /dev/null
+++ b/examples/functions/basename
@@ -0,0 +1,23 @@
+# Date: Fri, 11 Oct 91 11:22:36 edt
+# From: friedman@gnu.ai.mit.edu
+# To: bfox@gnu.ai.mit.edu
+
+# A replacement for basename(1).  Not all the systems I use have this
+# program.  Usage: basename [path] {extension}
+function basename ()
+{
+ local path="$1"
+ local suffix="$2"
+ local tpath="${path%/}"
+
+    # Strip trailing '/' characters from path (unusual that this should
+    # ever occur, but basename(1) seems to deal with it.)
+    while [ "${tpath}" != "${path}" ]; do
+       tpath="${path}"
+       path="${tpath%/}"
+    done
+
+    path="${path##*/}"       # Strip off pathname
+    echo ${path%${suffix}}   # Also strip off extension, if any.
+}
+
diff --git a/examples/functions/csh-compat b/examples/functions/csh-compat
new file mode 100644
index 0000000..54c8488
--- /dev/null
+++ b/examples/functions/csh-compat
@@ -0,0 +1,48 @@
+# C-shell compatibilty package.
+# setenv VAR VALUE
+function setenv ()
+{
+  export $1="$2"
+}
+
+function unsetenv ()
+{
+  unset $1
+}
+
+# Can't write foreach yet.  Need pattern matching, and a few extras.
+function foreach () {
+echo 'Can'\''t do `foreach'\'' yet.  Type "help for".'
+}
+
+# Make this work like csh's.  Special case "term" and "path".
+#set () {
+#}
+
+chdir ()
+{
+  builtin cd "$@"
+}
+
+# alias - convert csh alias commands to bash functions
+# from Mohit Aron <aron@cs.rice.edu>
+# posted to usenet as <4i5p17$bnu@larry.rice.edu>
+function alias ()
+{
+	if [ "x$2" = "x" ] 
+	then
+		declare -f $1
+	else
+		case $2 in
+		*[#\!]*)
+			comm=$(echo $2 | sed  's/\\!\*/\"$\@\"/g
+					       s/\\!:\([1-9]\)/\"$\1\"/g
+				               s/#/\\#/g')
+			;;
+		*)
+			comm="$2 \"\$@\"" ;;
+		esac
+
+		eval function $1 \(\) "{" command "$comm"  "; }"
+	fi
+}
diff --git a/examples/functions/dirname b/examples/functions/dirname
new file mode 100644
index 0000000..ccb8c84
--- /dev/null
+++ b/examples/functions/dirname
@@ -0,0 +1,21 @@
+# Date: Fri, 11 Oct 91 11:22:36 edt
+# From: friedman@gnu.ai.mit.edu
+# To: bfox@gnu.ai.mit.edu
+
+# A replacement for dirname(1).  This one appears less often on some
+# systems I use than basename(1), and I really depend on it for some
+# things.  Usage: dirname [path]
+function dirname ()
+{
+ local dir="$1"
+ local tdir="${dir%/}"
+
+    # Strip trailing '/' characters from dir (unusual that this should
+    # ever occur, but dirname(1) seems to deal with it.)
+    while [ "${tdir}" != "${dir}" ]; do
+       tdir="${dir}"
+       dir="${tdir%/}"
+    done
+
+    echo "${dir%/*}"
+}
diff --git a/examples/functions/dirstack b/examples/functions/dirstack
new file mode 100644
index 0000000..d68e619
--- /dev/null
+++ b/examples/functions/dirstack
@@ -0,0 +1,160 @@
+#!/bin/bash 
+#	@(#)	dirstack
+
+###
+# Another implementation of the directory manipulation functions
+# published in the Bolsky & Korn book : "The new Korn shell" :
+# 	cd, to change current directory
+#	d,  to display the stack content
+# Eric Sanchis (eric.sanchis@iut-rodez.fr), 2012
+#
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+###
+
+
+shopt -s expand_aliases
+shopt -s extglob
+shopt -s cdable_vars
+
+alias integer='declare -i'
+
+integer	MAX=32
+integer INDMAX=MAX-1
+integer	INDTOP=0
+
+unalias cd 2>/dev/null
+alias cd=cdir
+
+unset tab
+tab[INDTOP]="$(pwd)"
+
+
+function cdir      
+{
+	local -i ind 
+	local    dir
+
+dir="${1:-$HOME}"
+case "$dir" in
+ - )			# cd -  => equivalent to : cd -1
+		ind=INDTOP-1
+ 		cd_by_number  $ind
+		  ;;
+ -+([[:digit:]]) )	# cd -n
+		ind=$INDTOP-${dir#-}
+		cd_by_number  $ind 
+		  ;;
+ *)			# cd ~   or    cd dir_name
+		cd_by_name  "$dir"
+esac
+}
+
+
+function  cd_by_number
+{
+	local -i  k=$1
+	local -i  j 
+	local     dirtmp
+
+if (( k < 0 ))
+ then 		
+   echo Impossible to change directory >&2
+   return 1
+ else
+   dirtmp="${tab[k]}"
+   j=k+1 
+   while (( j <= INDTOP ))
+    do
+      tab[j-1]="${tab[j]}"
+      j=j+1
+    done
+   tab[INDTOP]="$dirtmp"
+   \cd "${tab[INDTOP]}"
+fi
+}
+
+
+function cd_by_name
+{
+ 	local -i  i
+	local     rep
+
+rep=$( \cd "$1" &>/dev/null && pwd)
+if [[ -z "$rep" ]]
+  then 
+    echo cd : "$1" unknown >&2
+    return 1
+fi
+
+	i=$INDTOP 
+	while (( i >= 0 ))
+  	 do
+	   if [[ "${tab[i]}" == "$rep" ]]
+	     then  break
+	   fi
+	   i=i-1
+	 done
+
+if (( i == INDTOP ))
+  then	#  cd -0	=> we do nothing !
+     return 0	
+  elif (( i == -1 ))
+     then	# the directory isn't in the stack
+       if (( INDTOP == INDMAX ))
+         then 	# the stack is FULL
+		# the oldest directory is removed
+            local -i  m
+       
+          m=1
+	  while (( m <= INDMAX ))
+	   do
+	     tab[m-1]="${tab[m]}"
+	     m=m+1
+           done
+        else 	# the new directory is added to the top of the stack
+	  INDTOP=INDTOP+1
+      fi
+      tab[INDTOP]="$rep"
+      \cd "${tab[INDTOP]}"
+      return 0
+  
+     else # the directory is already in the stack 
+	# $i gives its index
+       cd_by_number $i
+fi
+}
+
+
+function d	# display the directory stack
+{
+	local -i  i 
+	local     rep
+
+i=0
+while (( $i <= $INDTOP ))
+ do
+   rep="${tab[INDTOP-i]#$HOME/}"
+   case "$rep" in
+    $HOME)  rep="~" ;;
+    /*   )   :  ;;
+    *    )  rep="~/$rep"
+   esac
+   
+   echo "$i )		$rep"
+   i=i+1
+ done
+}
+
+
diff --git a/examples/functions/exitstat b/examples/functions/exitstat
new file mode 100644
index 0000000..f49ebf5
--- /dev/null
+++ b/examples/functions/exitstat
@@ -0,0 +1,22 @@
+# Contributed by Noah Friedman and Roland McGrath.
+
+# To be run by the PROMPT_COMMAND variable, so that one can see what
+# the exit status of processes are.
+
+function check_exit_status ()
+{
+ local status="$?"
+ local signal=""
+
+    if [ ${status} -ne 0 ] && [ ${status} != 128 ]; then
+       # If process exited by a signal, determine name of signal.
+       if [ ${status} -gt 128 ]; then
+          signal="$(builtin kill -l $((${status} - 128)) 2>/dev/null)"
+	  if [ "$signal" ]; then signal="($signal)"; fi
+       fi
+       echo "[Exit ${status} ${signal}]" 1>&2
+    fi
+    return 0
+}
+
+PROMPT_COMMAND=check_exit_status
diff --git a/examples/functions/external b/examples/functions/external
new file mode 100644
index 0000000..c2e52cd
--- /dev/null
+++ b/examples/functions/external
@@ -0,0 +1,50 @@
+# Contributed by Noah Friedman.
+
+# To avoid using a function in bash, you can use the `builtin' or
+# `command' builtins, but neither guarantees that you use an external
+# program instead of a bash builtin if there's a builtin by that name.  So
+# this function can be used like `command' except that it guarantees the
+# program is external by first disabling any builtin by that name.  After
+# the command is done executing, the state of the builtin is restored. 
+function external ()
+{
+ local state=""
+ local exit_status
+  
+    if builtin_p "$1"; then
+       state="builtin"
+       enable -n "$1"
+    fi
+
+    command "$@"
+    exit_status=$?
+
+    if [ "$state" = "builtin" ]; then
+       enable "$1"
+    fi
+
+    return ${exit_status}
+}
+
+# What is does is tell you if a particular keyword is currently enabled as
+# a shell builtin.  It does NOT tell you if invoking that keyword will
+# necessarily run the builtin.  For that, do something like
+#
+#       test "$(builtin type -type [keyword])" = "builtin"
+#
+# Note also, that disabling a builtin with "enable -n" will make builtin_p
+# return false, since the builtin is no longer available.
+function builtin_p ()
+{
+ local word
+
+    set $(builtin type -all -type "$1")
+
+    for word in "$@" ; do
+       if [ "${word}" = "builtin" ]; then
+          return 0
+       fi
+    done
+
+    return 1
+}
diff --git a/examples/functions/fact b/examples/functions/fact
new file mode 100644
index 0000000..97efd49
--- /dev/null
+++ b/examples/functions/fact
@@ -0,0 +1,13 @@
+# Who said shells can't use recursion?  Here is a factorial function.
+# You call it with a number as an argument, and it returns the factorial
+# of that number.
+
+fact ()
+{
+    local num=$1;
+    if [ "$num" = 1 ] ; then
+        echo 1
+        return ;
+    fi;
+    echo $(( $num * $(fact $(( $num - 1 )) ) ))
+}
diff --git a/examples/functions/fstty b/examples/functions/fstty
new file mode 100644
index 0000000..5ed594f
--- /dev/null
+++ b/examples/functions/fstty
@@ -0,0 +1,77 @@
+#
+# A function that works as a front end for both stty and the `bind'
+# builtin, so the tty driver and readline see the same changes
+#
+#
+#  Chet Ramey <chet.ramey@case.edu>
+#
+#  Copyright 2011 Chester Ramey
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   TThis program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software Foundation,
+#   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+#
+# Convert between the stty ^H control character form and the readline \C-H
+# form
+#
+cvt()
+{
+	echo "$@" | cat -v | sed 's/\^/\\C-/'
+}
+
+#
+# stty front-end.  Parses the argument list and creates two command strings,
+# one for stty, another for bind.
+#
+fstty()
+{
+	local	cmd="" bargs=""
+	local	e
+
+	while [ $# -gt 0 ]
+	do
+		case "$1" in
+		-a)	cmd="$cmd everything"
+			;;
+		erase)	shift;
+			e=$(cvt "$1")
+			cmd="$cmd erase $1"
+			bargs="$bargs '\"$e\": backward-delete-char'"
+			;;
+		kill)	shift
+			e=$(cvt "$1")
+			cmd="$cmd kill $1"
+			bargs="$bargs '\"$e\": unix-line-discard'"
+			;;
+		werase)	shift;
+			e=$(cvt "$1")
+			cmd="$cmd erase $1"
+			bargs="$bargs '\"$e\": backward-kill-word'"
+			;;
+		lnext)	shift;
+			e=$(cvt "$1")
+			cmd="$cmd erase $1"
+			bargs="$bargs '\"$e\": quoted-insert'"
+			;;
+		*)	cmd="$cmd $1"
+			;;
+		esac
+		shift
+	done
+
+	command stty $cmd
+	if [ -n "$bargs" ]; then
+		builtin bind $bargs
+	fi
+}
diff --git a/examples/functions/func b/examples/functions/func
new file mode 100644
index 0000000..e7696f7
--- /dev/null
+++ b/examples/functions/func
@@ -0,0 +1,43 @@
+#
+# func -- print out definitions for functions named by arguments
+#
+# usage: func name [name ...]
+#
+#  Chet Ramey <chet.ramey@case.edu>
+#
+#  Copyright 1991 Chester Ramey
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   TThis program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software Foundation,
+#   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+func()
+{
+	local status=0
+
+	if [ $# -eq 0 ] ; then
+		echo "usage: func name [name...]" 1>&2
+		return 1
+	fi
+
+	for f
+	do
+		if [ "$(builtin type -type $f)" != "function" ] ; then
+			echo "func: $f: not a function" 1>&2
+			status=1	# one failed
+			continue
+		fi
+		builtin type $f | sed 1d
+	done
+	return $status
+}
diff --git a/examples/functions/inetaddr b/examples/functions/inetaddr
new file mode 100644
index 0000000..9e72613
--- /dev/null
+++ b/examples/functions/inetaddr
@@ -0,0 +1,79 @@
+#
+#  Chet Ramey <chet.ramey@case.edu>
+#
+#  Copyright 2002 Chester Ramey
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   TThis program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software Foundation,
+#   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+#
+# inet2hex - Internet address conversion, dotted-decimal to hex
+#
+inet2hex ()
+{
+	local IFS
+
+	IFS=.
+	set -- $1
+
+	if (( $# != 4 )); then
+		echo "inet2hex: incorrect input format: $1" >&2
+		echo "inet2hex: usage: inet2hex XX.XX.XX.XX" >&2
+		return 2
+	fi
+  
+	printf "0x%02x%02x%02x%02x\n" $1 $2 $3 $4
+}
+
+#
+# hex2inet - Internet address conversion, hex to dotted-decimal
+#
+hex2inet ()
+{
+	local x1 x2 x3 x4
+	local rev
+
+	OPTIND=1
+	while getopts "r" o
+	do
+		case "$o" in
+		r)	rev=true;;
+		*)	echo "hex2inet: usage: hex2inet [-r] [0x]XXXXXXXX" >&2 ; exit 2;;
+		esac
+	done
+	shift $(( $OPTIND - 1 ))
+
+	case "$1" in
+	0x*)	h=${1#??} ;;
+	*)	h=$1 ;;
+	esac
+
+	if (( ${#h} != 8 )); then
+		echo "hex2inet: $h not in inet format" >&2
+		echo "hex2inet: usage: hex2inet [0x]XXXXXXXX" >&2
+		return 2
+	fi
+
+	x1=$(( 0x${h:0:2} ))
+	x2=$(( 0x${h:2:2} ))
+	x3=$(( 0x${h:4:2} ))
+	x4=$(( 0x${h:6:2} ))
+
+	if [ -z "$rev" ] ; then
+		printf "%d.%d.%d.%d\n" $x1 $x2 $x3 $x4 
+	else
+		printf "%d.%d.%d.%d\n" $x4 $x3 $x2 $x1 
+	fi
+	return 0
+}
diff --git a/examples/functions/inpath b/examples/functions/inpath
new file mode 100644
index 0000000..cb4c93d
--- /dev/null
+++ b/examples/functions/inpath
@@ -0,0 +1,14 @@
+inpath()
+{
+	local PROG
+	path=$(echo $PATH | sed 's/^:/.:/
+				s/::/:.:/g
+				s/:$/:./
+				s/:/ /g')
+
+	for x in $path
+	do
+		[ -x $x/$1 ] && { PROG=$x/$1; break; }
+	done
+	[ -n "$PROG" ]
+}
diff --git a/examples/functions/isnum2 b/examples/functions/isnum2
new file mode 100644
index 0000000..b21974d
--- /dev/null
+++ b/examples/functions/isnum2
@@ -0,0 +1,41 @@
+#
+#  Chet Ramey <chet.ramey@case.edu>
+#
+#  Copyright 1998 Chester Ramey
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   TThis program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software Foundation,
+#   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+isnum2()
+{
+	case "$1" in
+	[-+] | '')	return 1;;	# empty or bare `-' or `+'
+	[-+]*[!0-9]*)	return 1;;	# non-digit with leading sign
+	[-+]*)		return 0;;	# OK
+	*[!0-9]*)	return 1;;	# non-digit
+	*)		return 0;;	# OK
+	esac
+}
+
+# this one handles floating point
+isnum3()
+{
+	case "$1" in
+	'')		return 1;;	# empty
+	*[!0-9.+-]*)	return 1;;	# non-digit, +, -, or .
+	*?[-+]*)	return 1;;	# sign as second or later char
+	*.*.*)		return 1;;	# multiple decimal points
+	*)		return 0;;	# OK
+	esac
+}
diff --git a/examples/functions/isvalidip b/examples/functions/isvalidip
new file mode 100644
index 0000000..0b2dafe
--- /dev/null
+++ b/examples/functions/isvalidip
@@ -0,0 +1,14 @@
+# Thanks to Chris F. A. Johnson <c.f.a.johnson@rogers.com> for this one
+is_validip()
+{
+	case "$*" in
+	""|*[!0-9.]*|*[!0-9]) return 1 ;;
+	esac
+
+	local IFS=.
+	set -- $*
+
+        [ $# -eq 4 ] &&
+	    [ ${1:-666} -le 255 ] && [ ${2:-666} -le 255 ] &&
+	    [ ${3:-666} -le 255 ] && [ ${4:-666} -le 254 ]
+}
diff --git a/examples/functions/ksh-cd b/examples/functions/ksh-cd
new file mode 100644
index 0000000..26b00a9
--- /dev/null
+++ b/examples/functions/ksh-cd
@@ -0,0 +1,54 @@
+#
+#  Chet Ramey <chet.ramey@case.edu>
+#
+#  Copyright 2001 Chester Ramey
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   TThis program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software Foundation,
+#   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+#
+# ksh-like `cd': cd [-LP] [dir [change]]
+#
+cd()
+{
+	OPTIND=1
+	while getopts "LP" opt
+	do
+		case $opt in
+		L|P)	CDOPTS="$CDOPTS -$opt" ;;
+		*)	echo "$FUNCNAME: usage: $FUNCNAME [-LP] [dir] [change]" >&2
+			return 2;;
+		esac
+	done
+
+	shift $(( $OPTIND - 1 ))
+
+	case $# in
+	0)	builtin cd $CDOPTS "$HOME" ;;
+	1) 	builtin cd $CDOPTS "$@" ;;
+	2)	old="$1" new="$2"
+		case "$PWD" in
+		*$old*)	;;
+		*)	 echo "${0##*/}: $FUNCNAME: bad substitution" >&2 ; return 1 ;;
+		esac
+
+		dir=${PWD//$old/$new}
+
+		builtin cd $CDOPTS "$dir" && echo "$PWD"
+
+		;;
+	*)	echo "${0##*/}: $FUNCNAME: usage: $FUNCNAME [-LP] [dir] [change]" >&2
+		return 2 ;;
+	esac
+}
diff --git a/examples/functions/ksh-compat-test b/examples/functions/ksh-compat-test
new file mode 100644
index 0000000..919d82b
--- /dev/null
+++ b/examples/functions/ksh-compat-test
@@ -0,0 +1,58 @@
+#
+#  Chet Ramey <chet.ramey@case.edu>
+#
+#  Copyright 1999 Chester Ramey
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   TThis program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software Foundation,
+#   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# replacements for test/[ that do arithmetic expansion on the operands to
+# the arithmetic operators, like ksh.
+#
+function test()
+{
+        local -i n1 n3
+        case "$#" in
+        3)      case "$2" in
+                -lt|-gt|-eq|-ne|-le|-ge)        n1=$(( $1 ))
+                                                n3=$(( $3 ))
+                                                builtin test "$n1" $2 "$n3"
+                                                return $?;;
+                *)      builtin test "$@" ;;
+                esac;;                                                          
+        *)      builtin test "$@" ;;
+        esac
+}
+
+function [()
+{
+        local -i n1 n3
+        case "$#" in
+        4)      case "$2" in
+                -lt|-gt|-eq|-ne|-le|-ge)        n1=$(( $1 ))
+                                                n3=$(( $3 ))
+                                                builtin [ "$n1" $2 "$n3" ]
+                                                return $?;;
+                *)      builtin [ "$@" ;;
+                esac;;                                                          
+        *)      builtin [ "$@" ;;
+        esac
+}
+
+q=7
+
+[ q -lt 10 ]
+echo $?
+[ $q -lt 10 ]
+echo $?
diff --git a/examples/functions/kshenv b/examples/functions/kshenv
new file mode 100644
index 0000000..9faba08
--- /dev/null
+++ b/examples/functions/kshenv
@@ -0,0 +1,246 @@
+#
+# .kshenv -- functions and aliases to provide the beginnings of a ksh 
+#	     environment for bash.
+#
+# Chet Ramey
+# chet@ins.CWRU.Edu
+#
+
+#
+#  Copyright 2002 Chester Ramey
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   TThis program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software Foundation,
+#   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+#
+# These are definitions for the ksh compiled-in `exported aliases'.  There
+# are others, but we already have substitutes for them: "history", "type",
+# and "hash".
+#
+alias r="fc -s"
+alias functions="typeset -f"
+alias integer="typeset -i"
+alias nohup="nohup "
+alias command="command "
+alias stop="kill -s STOP"
+alias redirect="command exec"
+alias hist="fc"
+
+#
+# An almost-ksh compatible `whence' command.  This is as hairy as it is 
+# because of the desire to exactly mimic ksh (whose behavior was determined
+# empirically).
+# 
+# This depends somewhat on knowing the format of the output of the bash
+# `builtin type' command.
+#
+
+whence()
+{
+	local vflag pflag fflag defarg c
+	local path
+
+	vflag= aflag= pflag= fflag=
+	path=
+	if [ "$#" = "0" ] ; then
+		echo "whence: usage: whence [-afpv] name..." >&2
+		return 2
+	fi
+
+	OPTIND=1
+	while getopts "avfp" c
+	do
+		case "$c" in
+		a) defarg=-a ;;
+		f) fflag=1 ;;	# no-op
+		p) pflag=1 ;;
+		v) vflag=1 ;;
+		?) echo "whence: $1: unknown option" >&2
+		   echo "whence: usage: whence [-afpv] name..." >&2
+		   return 2 ;;
+		esac
+	done
+
+	shift $(( $OPTIND - 1 ))
+
+	if [ "$#" = "0" ] ; then
+		echo "whence: usage: whence [-afpv] name..." >&2
+		return 2
+	fi
+
+	for cmd
+	do
+		if [ "$vflag" ]	 ; then
+			if [ -z "$defarg" ]; then
+				builtin type $cmd | sed 1q
+			else
+				if builtin type $defarg -t $cmd | grep 'function$' >/dev/null 2>&1; then
+					# HAIRY awk script to suppress
+					# printing of function body -- could
+					# do it with sed, but I don't have
+					# that kind of time
+					builtin type $defarg $cmd | awk '
+BEGIN {printit = 1;}
+$1 == "'$cmd'" && $2 == "()" {printit=0; next; }
+/^}$/ { if (printit == 0) printit=1 ; else print $0; next ; }
+/.*/ { if (printit) print $0; }'
+				else
+					builtin type $defarg $cmd
+				fi
+			fi
+		else
+			path=$(builtin type $defarg -p $cmd)
+			if [ "$path" ] ; then
+				echo $path
+			else
+				case "$cmd" in
+				/*) echo "" ;;
+				 *) case "$(builtin type -t $cmd)" in
+				    "") echo "" ;;
+				    *) echo "$cmd" ;;
+				    esac
+				    ;;
+				esac
+			fi
+		fi
+	done
+	return 0
+}
+
+#
+# For real ksh homeboy fanatics, redefine the `type' builtin with a ksh
+# version.
+#
+#type()
+#{
+#	whence -v "$*"
+#}
+
+#
+# ksh-like `cd': cd [-LP] [dir [change]]
+#
+cd()
+{
+	OPTIND=1
+	while getopts "LP" opt
+	do
+		case $opt in
+		L|P)	CDOPTS="$CDOPTS -$opt" ;;
+		*)	echo "$FUNCNAME: usage: $FUNCNAME [-LP] [dir] [change]" >&2
+			return 2;;
+		esac
+	done
+
+	shift $(( $OPTIND - 1 ))
+
+	case $# in
+	0)	builtin cd $CDOPTS "$HOME" ;;
+	1) 	builtin cd $CDOPTS "$@" ;;
+	2)	old="$1" new="$2"
+		case "$PWD" in
+		*$old*)	;;
+		*)	 echo "${0##*/}: $FUNCNAME: bad substitution" >&2 ; return 1 ;;
+		esac
+
+		dir=${PWD//$old/$new}
+
+		builtin cd $CDOPTS "$dir" && echo "$PWD"
+
+		;;
+	*)	echo "${0##*/}: $FUNCNAME: usage: $FUNCNAME [-LP] [dir] [change]" >&2
+		return 2 ;;
+	esac
+}
+
+#
+# ksh print emulation
+#
+#	print [-Rnprsu[n]] [-f format] [arg ...]
+#
+#	-	end of options
+#	-R	BSD-style -- only accept -n, no escapes
+#	-n	do not add trailing newline
+#	-p	no-op (no coprocesses)
+#	-r	no escapes
+#	-s	print to the history file
+#	-u n	redirect output to fd n
+#	-f format	printf "$format" "$@"
+#
+
+print()
+{
+	local eflag=-e
+	local nflag= fflag= c
+	local fd=1
+
+	OPTIND=1
+	while getopts "fRnprsu:" c
+	do
+		case $c in
+		R)	eflag= ;;
+		r)	eflag= ;;
+		n)	nflag=-n ;;
+		s)	sflag=y ;;
+		f)	fflag=y ;;
+		u)	fd=$OPTARG ;;
+		p)	;;
+		esac
+	done
+	shift $(( $OPTIND - 1 ))
+
+	if [ -n "$fflag" ]; then
+		builtin printf "$@" >&$fd
+		return
+	fi
+
+	case "$sflag" in
+	y)	builtin history -s "$*" ;;
+	*)	builtin echo $eflag $nflag "$@" >&$fd
+	esac
+}
+
+# substring function
+# this function should be equivalent to the substring built-in which was
+# eliminated after the 06/29/84 version
+substring ()
+{
+	local lpat flag str	#local variables
+	set -f
+	case $1 in
+	-l|-L)
+		flag=$1
+		lpat=$2
+		shift 2
+		;;
+	esac
+	# test for too few or too many arguments
+	if [ x"$1" = x ] || [ $# -gt 2 ]; then
+		print -u2 'substring: bad argument count'
+		return 1
+	fi
+	str=$1
+	if [ x"$flag" = x-l ]; then		#substring -l lpat
+		str=${str#$lpat}
+	elif [ x"$flag" = x-L ]; then
+		str=${str##$lpat}		#substring -L lpat
+	fi
+
+	if [ x"$2" != x ]; then
+		echo ${str%$2}
+	else
+		echo $str
+	fi
+
+	return 0
+}
diff --git a/examples/functions/login b/examples/functions/login
new file mode 100644
index 0000000..3d59683
--- /dev/null
+++ b/examples/functions/login
@@ -0,0 +1,11 @@
+# replace the `login' and `newgrp' builtins in old bourne shells
+
+login()
+{
+	exec login "$@"
+}
+
+newgrp()
+{
+	exec newgrp "$@"
+}
diff --git a/examples/functions/notify.bash b/examples/functions/notify.bash
new file mode 100644
index 0000000..ed4377c
--- /dev/null
+++ b/examples/functions/notify.bash
@@ -0,0 +1,77 @@
+#
+#  Chet Ramey <chet.ramey@case.edu>
+#
+#  Copyright 1992 Chester Ramey
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   TThis program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software Foundation,
+#   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+trap _notify CHLD
+NOTIFY_ALL=false
+unset NOTIFY_LIST
+unalias false
+
+false()
+{
+	return 1
+}
+
+_notify ()
+{
+	local i j
+	local newlist=
+
+	if $NOTIFY_ALL
+	then
+		return		# let bash take care of this itself
+	elif [ -z "$NOTIFY_LIST" ]; then
+		return
+	else
+		set -- $NOTIFY_LIST
+		for i in "$@"
+		do
+			j=$(jobs -n %$i)
+			if [ -n "$j" ]; then
+				echo "$j"
+				jobs -n %$i >/dev/null
+			else
+				newlist="newlist $i"
+			fi
+		done
+		NOTIFY_LIST="$newlist"
+	fi
+}
+
+notify ()
+{
+	local i j
+
+	if [ $# -eq 0 ]; then
+		NOTIFY_ALL=:
+		set -b
+		return
+	else
+		for i in "$@"
+		do
+			# turn a valid job spec into a job number
+			j=$(jobs $i)
+			case "$j" in
+			[*)	j=${j%%]*}
+				j=${j#[}
+				NOTIFY_LIST="$NOTIFY_LIST $j"
+				;;
+			esac
+		done
+	fi
+}
diff --git a/examples/functions/seq b/examples/functions/seq
new file mode 100644
index 0000000..c1953ee
--- /dev/null
+++ b/examples/functions/seq
@@ -0,0 +1,48 @@
+#
+#  Chet Ramey <chet.ramey@case.edu>
+#
+#  Copyright 1995 Chester Ramey
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   TThis program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software Foundation,
+#   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+# Generate a sequence from m to n, m defaults to 1.
+
+seq ()
+{
+	declare -i lo hi i	# makes local
+	local _SEQ
+
+	case $# in
+	1) seq 1 "$1" ; return $? ;;
+	2) lo=$1 hi=$2
+	   i=$lo _SEQ=""
+	   while let "i <= hi"; do
+		_SEQ="${_SEQ}$i "
+		let i+=1
+	   done
+	   echo "${_SEQ# }"
+	   return 0 ;;
+	*) echo seq: usage: seq [low] high 1>&2 ; return 2 ;;
+	esac
+}
+
+# like the APL `iota' function (or at least how I remember it :-)
+iota()
+{
+	case $# in
+	1) seq 1 "$1"; return $?;;
+	*) echo "iota: usage: iota high" 1>&2; return 2;;
+	esac
+}
diff --git a/examples/functions/seq2 b/examples/functions/seq2
new file mode 100644
index 0000000..4a54498
--- /dev/null
+++ b/examples/functions/seq2
@@ -0,0 +1,56 @@
+#
+#  Chet Ramey <chet.ramey@case.edu>
+#
+#  Copyright 1998 Chester Ramey
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   TThis program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software Foundation,
+#   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+# Generate a sequence from m to n, m defaults to 1.
+
+seq ()
+{
+	declare -i lo hi i	# makes local
+	local _SEQ INIT COMPARE STEP
+
+	case "$1" in
+	-r)	INIT='i=$hi _SEQ=""' COMPARE='let "i >= $lo"' STEP='let i-=1' ; shift ;;
+	*)	INIT='i=$lo _SEQ=""' COMPARE='let "i <= $hi"' STEP='let i+=1' ;;
+	esac
+
+	case $# in
+	1) lo=1 hi="$1" ;;
+	2) lo=$1 hi=$2 ;;
+	*) echo seq: usage: seq [-r] [low] high 1>&2 ; return 2 ;;
+	esac
+
+	# equivalent to the as-yet-unimplemented
+	# for (( "$INIT" ; "$COMPARE" ; "$STEP" )); do _SEQ="${_SEQ}$i "; done
+	eval "$INIT"
+	while eval "$COMPARE"; do
+		_SEQ="${_SEQ}$i "
+		eval "$STEP"
+	done
+	echo "${_SEQ# }"
+	return 0
+}
+
+# like the APL `iota' function (or at least how I remember it :-)
+iota()
+{
+	case $# in
+	1) seq 1 "$1"; return $?;;
+	*) echo "iota: usage: iota high" 1>&2; return 2;;
+	esac
+}
diff --git a/examples/functions/shcat b/examples/functions/shcat
new file mode 100644
index 0000000..84f0391
--- /dev/null
+++ b/examples/functions/shcat
@@ -0,0 +1,7 @@
+shcat()
+{
+	while IFS= read -r line
+	do
+		echo "$line"
+	done
+}
diff --git a/examples/functions/shcat2 b/examples/functions/shcat2
new file mode 100644
index 0000000..8ceff33
--- /dev/null
+++ b/examples/functions/shcat2
@@ -0,0 +1,19 @@
+shcat()
+{
+	while read -r
+	do
+		echo "$REPLY"
+	done
+}
+
+shcat2()
+{
+	while [ $# -ge 1 ]; do
+		case "$1" in
+		-)	shcat ;;
+		*)	shcat < "$1" ;;
+		esac
+		shift
+	done
+	exit 0
+}
diff --git a/examples/functions/sort-pos-params b/examples/functions/sort-pos-params
new file mode 100644
index 0000000..95acd85
--- /dev/null
+++ b/examples/functions/sort-pos-params
@@ -0,0 +1,69 @@
+#
+#  Chet Ramey <chet.ramey@case.edu>
+#
+#  Copyright 2001 Chester Ramey
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   TThis program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software Foundation,
+#   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+# Sort the positional parameters.
+# Make sure the positional parameters are passed as arguments to the function.
+# If -u is the first arg, remove duplicate array members.
+sort_posparams()
+{
+	local -a R
+	local u
+
+	case "$1" in
+	-u)	u=-u ; shift ;;
+	esac
+
+	# if you want the case of no positional parameters to return success,
+	# remove the error message and return 0
+	if [ $# -eq 0 ]; then
+		echo "$FUNCNAME: argument expected" >&2
+		return 1
+	fi
+
+	# make R a copy of the positional parameters
+	R=( "${@}" )
+
+	# sort R.
+	R=( $( printf "%s\n" "${R[@]}" | sort $u) )
+
+	printf "%s\n" "${R[@]}"
+	return 0
+}
+
+# will print everything on separate lines
+set -- 3 1 4 1 5 9 2 6 5 3 2
+sort_posparams "$@"
+
+# sets without preserving quoted parameters
+set -- $( sort_posparams "$@" )
+echo "$@"
+echo $#
+
+# sets preserving quoted parameters, beware pos params with embedded newlines
+set -- 'a b' 'a c' 'x z'
+
+oifs=$IFS
+IFS=$'\n'
+set -- $( sort_posparams "$@" )
+IFS="$oifs"
+
+echo "$@"
+echo $#
+
+sort_posparams
diff --git a/examples/functions/substr b/examples/functions/substr
new file mode 100644
index 0000000..f19f5d7
--- /dev/null
+++ b/examples/functions/substr
@@ -0,0 +1,97 @@
+#
+#  Chet Ramey <chet.ramey@case.edu>
+#
+#  Copyright 2002 Chester Ramey
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   TThis program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software Foundation,
+#   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# substr -- a function to emulate the ancient ksh builtin
+#
+
+#
+# -l == shortest from left
+# -L == longest from left
+# -r == shortest from right (the default)
+# -R == longest from right
+
+substr()
+{
+	local flag pat str
+	local usage="usage: substr -lLrR pat string or substr string pat"
+
+	case "$1" in
+	-l | -L | -r | -R)
+		flag="$1"
+		pat="$2"
+		shift 2
+		;;
+	-*)
+		echo "substr: unknown option: $1"
+		echo "$usage"
+		return 1
+		;;
+	*)
+		flag="-r"
+		pat="$2"
+		;;
+	esac
+
+	if [ "$#" -eq 0 ] || [ "$#" -gt 2 ] ; then
+		echo "substr: bad argument count"
+		return 2
+	fi
+
+	str="$1"
+
+	#
+	# We don't want -f, but we don't want to turn it back on if
+	# we didn't have it already
+	#
+	case "$-" in
+	"*f*")
+		;;
+	*)
+		fng=1
+		set -f
+		;;
+	esac
+
+	case "$flag" in
+	-l)
+		str="${str#$pat}"		# substr -l pat string
+		;;
+	-L)
+		str="${str##$pat}"		# substr -L pat string
+		;;
+	-r)
+		str="${str%$pat}"		# substr -r pat string
+		;;
+	-R)
+		str="${str%%$pat}"		# substr -R pat string
+		;;
+	*)
+		str="${str%$2}"			# substr string pat
+		;;
+	esac
+
+	echo "$str"
+
+	#
+	# If we had file name generation when we started, re-enable it
+	#
+	if [ "$fng" = "1" ] ; then
+		set +f
+	fi
+}
diff --git a/examples/functions/substr2 b/examples/functions/substr2
new file mode 100644
index 0000000..fc21b98
--- /dev/null
+++ b/examples/functions/substr2
@@ -0,0 +1,99 @@
+#
+#  Chet Ramey <chet.ramey@case.edu>
+#
+#  Copyright 2002 Chester Ramey
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   TThis program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software Foundation,
+#   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# substr -- a function to emulate the ancient ksh builtin
+#
+
+# -l == remove shortest from left
+# -L == remove longest from left
+# -r == remove shortest from right (the default)
+# -R == remove longest from right
+
+substr()
+{
+	local flag pat str
+	local usage="usage: substr -lLrR pat string or substr string pat"
+	local options="l:L:r:R:"
+
+	OPTIND=1
+	while getopts "$options" c
+	do
+		case "$c" in
+		l | L | r | R)
+			flag="-$c"
+			pat="$OPTARG"
+			;;
+		'?')
+			echo "$usage"
+			return 1
+			;;
+		esac
+	done
+
+	if [ "$OPTIND" -gt 1 ] ; then
+		shift $(( $OPTIND -1 ))
+	fi
+
+	if [ "$#" -eq 0 ] || [ "$#" -gt 2 ] ; then
+		echo "substr: bad argument count"
+		return 2
+	fi
+
+	str="$1"
+
+        #
+        # We don't want -f, but we don't want to turn it back on if
+        # we didn't have it already
+        #
+        case "$-" in
+        "*f*")
+                ;;
+        *)
+                fng=1
+                set -f
+		;;
+        esac
+
+	case "$flag" in
+	-l)
+		str="${str#$pat}"		# substr -l pat string
+		;;
+	-L)
+		str="${str##$pat}"		# substr -L pat string
+		;;
+	-r)
+		str="${str%$pat}"		# substr -r pat string
+		;;
+	-R)
+		str="${str%%$pat}"		# substr -R pat string
+		;;
+	*)
+		str="${str%$2}"			# substr string pat
+		;;
+	esac
+
+	echo "$str"
+
+        #
+        # If we had file name generation when we started, re-enable it
+        #
+        if [ "$fng" = "1" ] ; then
+                set +f
+        fi
+}
diff --git a/examples/functions/whatis b/examples/functions/whatis
new file mode 100644
index 0000000..570c585
--- /dev/null
+++ b/examples/functions/whatis
@@ -0,0 +1,71 @@
+#
+# whatis -- and implementation of the 10th Edition Unix sh builtin `whatis'
+#	    command.
+#
+# usage: whatis arg [...]
+#
+# For each argument, whatis prints the associated value as a parameter,
+# builtin, function, alias, or executable file as appropriate.  In each
+# case, the value is printed in a form which would yield the same value
+# if typed as input to the shell itself.
+#
+#
+#  Chet Ramey <chet.ramey@case.edu>
+#
+#  Copyright 1994 Chester Ramey
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   TThis program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software Foundation,
+#   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+
+whatis()
+{
+	local wusage='usage: whatis arg [arg...]'
+	local fail=0
+
+	if [ $# -eq 0 ] ; then
+		echo "$wusage"
+		return 1
+	fi
+
+	for arg
+	do
+		case $(builtin type -type $arg 2>/dev/null) in
+		"alias")
+			builtin alias "$arg"
+			;;
+		"function")
+			builtin type "$arg" | sed 1d
+			;;
+		"builtin")
+			echo builtin "$arg"
+			;;
+		"file")
+			builtin type -path "$arg"
+			;;
+		*)
+			# OK, we could have a variable, or we could have nada
+			if [ "$(eval echo \${$arg+set})" = "set" ] ; then
+				# It is a variable, and it is set
+				echo -n "$arg="
+				eval echo '\"'\$$arg'\"'
+			else
+				echo whatis: $arg: not found
+				fail=1
+			fi
+			;;
+		esac
+	done
+	return $fail
+}
diff --git a/examples/functions/whence b/examples/functions/whence
new file mode 100644
index 0000000..ba27b00
--- /dev/null
+++ b/examples/functions/whence
@@ -0,0 +1,78 @@
+#
+# An almost-ksh compatible `whence' command.  This is as hairy as it is 
+# because of the desire to exactly mimic ksh.
+# 
+# This depends somewhat on knowing the format of the output of the bash
+# `builtin type' command.
+#
+# Chet Ramey
+# chet@ins.CWRU.Edu
+#
+#
+#  Chet Ramey <chet.ramey@case.edu>
+#
+#  Copyright 1994 Chester Ramey
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   TThis program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software Foundation,
+#   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+whence()
+{
+	local vflag= path=
+
+	if [ "$#" = "0" ] ; then
+		echo "whence: argument expected"
+		return 1
+	fi
+	case "$1" in
+		-v) vflag=1
+		    shift 1
+		    ;;
+		-*) echo "whence: bad option: $1"
+		    return 1
+		    ;;
+		 *) ;;
+	esac
+
+	if [ "$#" = "0" ] ; then
+		echo "whence: bad argument count"
+		return 1
+	fi
+
+	for cmd
+	do
+		if [ "$vflag" ]	 ; then
+			echo $(builtin type $cmd | sed 1q)
+		else
+			path=$(builtin type -path $cmd)
+			if [ "$path" ] ; then
+				echo $path
+			else
+				case "$cmd" in
+					/*) if [ -x "$cmd" ]; then
+						echo "$cmd"
+					    fi
+					    ;;
+					 *) case "$(builtin type -type $cmd)" in
+						"") ;;
+						 *) echo "$cmd"
+						    ;;
+					    esac
+					    ;;
+				esac
+			fi
+		fi
+	done
+	return 0
+}
diff --git a/examples/functions/which b/examples/functions/which
new file mode 100644
index 0000000..f0db290
--- /dev/null
+++ b/examples/functions/which
@@ -0,0 +1,62 @@
+#
+# which - emulation of `which' as it appears in FreeBSD
+#
+# usage: which [-as] command [command...]
+#
+#
+#  Chet Ramey <chet.ramey@case.edu>
+#
+#  Copyright 1999 Chester Ramey
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   TThis program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software Foundation,
+#   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+which()
+{
+	local aflag sflag ES a opt
+
+	OPTIND=1
+	while builtin getopts as opt ; do
+		case "$opt" in
+		a)	aflag=-a ;;
+		s)	sflag=1 ;;
+		?)	echo "which: usage: which [-as] command [command ...]" >&2
+			exit 2 ;;
+		esac
+	done
+
+	(( $OPTIND > 1 )) && shift $(( $OPTIND - 1 ))
+
+	# without command arguments, exit with status 1
+	ES=1
+
+	# exit status is 0 if all commands are found, 1 if any are not found
+	for command; do
+		# if $command is a function, make sure we add -a so type
+		# will look in $PATH after finding the function
+		a=$aflag
+		case "$(builtin type -t $command)" in
+		"function")	a=-a;;
+		esac
+
+		if [ -n "$sflag" ]; then
+			builtin type -p $a $command >/dev/null 2>&1
+		else
+			builtin type -p $a $command
+		fi
+		ES=$?
+	done
+
+	return $ES
+}
diff --git a/examples/loadables/Makefile.in b/examples/loadables/Makefile.in
new file mode 100644
index 0000000..be46121
--- /dev/null
+++ b/examples/loadables/Makefile.in
@@ -0,0 +1,324 @@
+#
+# Simple makefile for the sample loadable builtins
+#
+# Copyright (C) 1996-2019 Free Software Foundation, Inc.
+
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+PACKAGE = @PACKAGE_NAME@
+VERSION = @PACKAGE_VERSION@
+
+# Include some boilerplate Gnu makefile definitions.
+prefix = @prefix@
+
+exec_prefix = @exec_prefix@
+bindir = @bindir@
+libdir = @libdir@
+infodir = @infodir@
+includedir = @includedir@
+
+datarootdir = @datarootdir@
+
+loadablesdir = @loadablesdir@
+headersdir = @headersdir@
+
+topdir = @top_srcdir@
+BUILD_DIR = @BUILD_DIR@
+srcdir = @srcdir@
+VPATH = @srcdir@
+
+# Support an alternate destination root directory for package building
+DESTDIR =
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALLMODE= -m 0755
+
+@SET_MAKE@
+CC = @CC@
+RM = rm -f
+
+SHELL = @MAKE_SHELL@
+
+host_os = @host_os@
+host_cpu = @host_cpu@
+host_vendor = @host_vendor@
+
+CFLAGS = @CFLAGS@
+LOCAL_CFLAGS = @LOCAL_CFLAGS@
+DEFS = @DEFS@
+LOCAL_DEFS = @LOCAL_DEFS@
+
+CPPFLAGS = @CPPFLAGS@
+
+BASHINCDIR = ${topdir}/include
+
+SUPPORT_SRC = $(topdir)/support/
+
+LIBBUILD = ${BUILD_DIR}/lib
+
+INTL_LIBSRC = ${topdir}/lib/intl
+INTL_BUILDDIR = ${LIBBUILD}/intl
+INTL_INC = @INTL_INC@
+LIBINTL_H = @LIBINTL_H@
+
+CCFLAGS = $(DEFS) $(LOCAL_DEFS) $(LOCAL_CFLAGS) $(CPPFLAGS) $(CFLAGS)
+
+#
+# These values are generated for configure by ${topdir}/support/shobj-conf.
+# If your system is not supported by that script, but includes facilities for
+# dynamic loading of shared objects, please update the script and send the
+# changes to bash-maintainers@gnu.org.
+#
+SHOBJ_CC = @SHOBJ_CC@
+SHOBJ_CFLAGS = @SHOBJ_CFLAGS@
+SHOBJ_LD = @SHOBJ_LD@
+SHOBJ_LDFLAGS = @SHOBJ_LDFLAGS@ @LDFLAGS@
+SHOBJ_XLDFLAGS = @SHOBJ_XLDFLAGS@
+SHOBJ_LIBS = @SHOBJ_LIBS@
+SHOBJ_STATUS = @SHOBJ_STATUS@
+
+INC = -I. -I.. -I$(topdir) -I$(topdir)/lib -I$(topdir)/builtins -I${srcdir} \
+      -I$(BASHINCDIR) -I$(BUILD_DIR) -I$(LIBBUILD) \
+      -I$(BUILD_DIR)/builtins $(INTL_INC)
+
+.c.o:
+	$(SHOBJ_CC) $(SHOBJ_CFLAGS) $(CCFLAGS) $(INC) -c -o $@ $<
+
+
+ALLPROG = print truefalse sleep finfo logname basename dirname fdflags \
+	  tty pathchk tee head mkdir rmdir mkfifo mktemp printenv id whoami \
+	  uname sync push ln unlink realpath strftime mypid setpgid seq rm \
+	  accept csv cut
+OTHERPROG = necho hello cat pushd stat asort
+
+all:	$(SHOBJ_STATUS)
+
+supported:	$(ALLPROG)
+others:		$(OTHERPROG)
+
+unsupported:
+	@echo "Your system (${host_os}) is not supported by the"
+	@echo "${topdir}/support/shobj-conf script."
+	@echo "If your operating system provides facilities for dynamic"
+	@echo "loading of shared objects using the dlopen(3) interface,"
+	@echo "please update the script and re-run configure."
+	@echo "Please send the changes you made to bash-maintainers@gnu.org"
+	@echo "for inclusion in future bash releases."
+
+everything: supported others
+
+print:	print.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ print.o $(SHOBJ_LIBS)
+
+necho:	necho.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ necho.o $(SHOBJ_LIBS)
+
+hello:	hello.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ hello.o $(SHOBJ_LIBS)
+
+truefalse: truefalse.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ truefalse.o $(SHOBJ_LIBS)
+
+accept:	accept.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ accept.o $(SHOBJ_LIBS)
+
+sleep:	sleep.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ sleep.o $(SHOBJ_LIBS)
+
+finfo:	finfo.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ finfo.o $(SHOBJ_LIBS)
+
+cat:	cat.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ cat.o $(SHOBJ_LIBS)
+
+rm:	rm.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ rm.o $(SHOBJ_LIBS)
+
+fdflags:	fdflags.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ fdflags.o $(SHOBJ_LIBS)
+
+seq:	seq.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ seq.o $(SHOBJ_LIBS)
+
+logname:	logname.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ logname.o $(SHOBJ_LIBS)
+
+basename:	basename.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ basename.o $(SHOBJ_LIBS)
+
+dirname:	dirname.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ dirname.o $(SHOBJ_LIBS)
+
+tty:	tty.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ tty.o $(SHOBJ_LIBS)
+
+pathchk:	pathchk.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ pathchk.o $(SHOBJ_LIBS)
+
+tee:	tee.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ tee.o $(SHOBJ_LIBS)
+
+mkdir:	mkdir.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ mkdir.o $(SHOBJ_LIBS)
+
+rmdir:	rmdir.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ rmdir.o $(SHOBJ_LIBS)
+
+mkfifo:	mkfifo.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ mkfifo.o $(SHOBJ_LIBS)
+
+mktemp:	mktemp.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ mktemp.o $(SHOBJ_LIBS)
+
+head:	head.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ head.o $(SHOBJ_LIBS)
+
+printenv:	printenv.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ printenv.o $(SHOBJ_LIBS)
+
+id:	id.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ id.o $(SHOBJ_LIBS)
+
+whoami:	whoami.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ whoami.o $(SHOBJ_LIBS)
+
+uname:	uname.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ uname.o $(SHOBJ_LIBS)
+
+sync:	sync.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ sync.o $(SHOBJ_LIBS)
+
+push:	push.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ push.o $(SHOBJ_LIBS)
+
+ln:	ln.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ ln.o $(SHOBJ_LIBS)
+
+unlink:	unlink.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ unlink.o $(SHOBJ_LIBS)
+
+realpath:	realpath.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ realpath.o $(SHOBJ_LIBS)
+
+csv:	csv.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ csv.o $(SHOBJ_LIBS)
+
+cut:	cut.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ cut.o $(SHOBJ_LIBS)
+
+strftime:	strftime.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ strftime.o $(SHOBJ_LIBS)
+
+mypid:	mypid.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ mypid.o $(SHOBJ_LIBS)
+
+setpgid:	setpgid.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ setpgid.o $(SHOBJ_LIBS)
+
+stat:	stat.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ stat.o $(SHOBJ_LIBS)
+
+asort:	asort.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ asort.o $(SHOBJ_LIBS)
+
+# pushd is a special case.  We use the same source that the builtin version
+# uses, with special compilation options.
+#
+pushd.c:	${topdir}/builtins/pushd.def
+	$(RM) $@
+	${BUILD_DIR}/builtins/mkbuiltins -D ${topdir}/builtins ${topdir}/builtins/pushd.def
+
+pushd.o:	pushd.c
+	$(RM) $@
+	$(SHOBJ_CC) -DHAVE_CONFIG_H -DPUSHD_AND_POPD -DLOADABLE_BUILTIN $(SHOBJ_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(INC) -c -o $@ $<
+
+pushd:	pushd.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ pushd.o $(SHOBJ_LIBS)
+
+clean:
+	$(RM) $(ALLPROG) $(OTHERPROG) *.o
+	-( cd perl && ${MAKE} ${MFLAGS} $@ )
+
+mostlyclean:	clean
+	-( cd perl && ${MAKE} ${MFLAGS} $@ )
+
+distclean maintainer-clean: clean
+	$(RM) Makefile Makefile.inc pushd.c
+	-( cd perl && ${MAKE} ${MFLAGS} $@ )
+
+installdirs:
+	@${SHELL} $(SUPPORT_SRC)mkinstalldirs $(DESTDIR)$(loadablesdir)
+
+install-dev:	installdirs
+	@$(INSTALL_DATA) Makefile.inc $(DESTDIR)$(loadablesdir)/Makefile.inc
+	@$(INSTALL_DATA) $(srcdir)/loadables.h $(DESTDIR)$(loadablesdir)/loadables.h
+	@( cd $(BUILD_DIR) && ${MAKE} ${MFLAGS} DESTDIR="$(DESTDIR)" install-headers)
+
+install-supported:	all installdirs install-dev
+	@echo installing example loadable builtins in $(DESTDIR)${loadablesdir}
+	@for prog in ${ALLPROG}; do \
+		echo $$prog ; \
+		$(INSTALL_PROGRAM) $(INSTALLMODE) $$prog $(DESTDIR)$(loadablesdir)/$$prog ;\
+	done
+
+uninstall-dev:
+	-$(RM) $(DESTDIR)$(loadablesdir)/Makefile.inc $(DESTDIR)$(loadablesdir)/loadables.h
+	-( cd $(BUILD_DIR) && ${MAKE} ${MFLAGS} DESTDIR="$(DESTDIR)" uninstall-headers)
+
+uninstall-supported:	uninstall-dev
+	-( cd $(DESTDIR)${loadablesdir} && $(RM) ${ALLPROG} )
+
+install-unsupported:
+uninstall-unsupported:
+
+install:	install-$(SHOBJ_STATUS)
+uninstall:	uninstall-$(SHOBJ_STATUS)
+
+print.o: print.c
+truefalse.o: truefalse.c
+accept.o: accept.c
+sleep.o: sleep.c
+finfo.o: finfo.c
+logname.o: logname.c
+basename.o: basename.c
+dirname.o: dirname.c
+tty.o: tty.c
+pathchk.o: pathchk.c
+tee.o: tee.c
+head.o: head.c
+rmdir.o: rmdir.c
+necho.o: necho.c
+hello.o: hello.c
+cat.o: cat.c
+csv.o: csv.c
+cut.o: cut.c
+printenv.o: printenv.c
+id.o: id.c
+whoami.o: whoami.c
+uname.o: uname.c
+sync.o: sync.c
+push.o: push.c
+mkdir.o: mkdir.c
+mktemp.o: mktemp.c
+realpath.o: realpath.c
+strftime.o: strftime.c
+setpgid.o: setpgid.c
+stat.o: stat.c
+fdflags.o: fdflags.c
+seq.o: seq.c
+asort.o: asort.c
diff --git a/examples/loadables/Makefile.inc.in b/examples/loadables/Makefile.inc.in
new file mode 100644
index 0000000..8b419a7
--- /dev/null
+++ b/examples/loadables/Makefile.inc.in
@@ -0,0 +1,108 @@
+#
+# Sample makefile for bash loadable builtin development
+#
+# Copyright (C) 2015 Free Software Foundation, Inc.     
+
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+PACKAGE = @PACKAGE_NAME@
+VERSION = @PACKAGE_VERSION@
+
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+
+# Include some boilerplate Gnu makefile definitions.
+prefix = @prefix@
+
+exec_prefix = @exec_prefix@
+bindir = @bindir@
+libdir = @libdir@
+infodir = @infodir@
+includedir = @includedir@
+
+datarootdir = @datarootdir@
+
+loadablesdir = @loadablesdir@
+headersdir = @headersdir@
+
+topdir = @top_srcdir@
+BUILD_DIR = @BUILD_DIR@
+srcdir = @srcdir@
+VPATH = @srcdir@
+
+# Support an alternate destination root directory for package building
+DESTDIR =
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALLMODE= -m 0755
+
+@SET_MAKE@
+CC = @CC@
+RM = rm -f
+
+SHELL = @MAKE_SHELL@
+
+host_os = @host_os@
+host_cpu = @host_cpu@
+host_vendor = @host_vendor@
+
+CFLAGS = @CFLAGS@
+LOCAL_CFLAGS = @LOCAL_CFLAGS@
+DEFS = @DEFS@
+LOCAL_DEFS = @LOCAL_DEFS@
+
+CPPFLAGS = @CPPFLAGS@
+
+BASHINCDIR = ${topdir}/include
+
+SUPPORT_SRC = $(topdir)/support/
+
+LIBBUILD = ${BUILD_DIR}/lib
+
+INTL_LIBSRC = ${topdir}/lib/intl
+INTL_BUILDDIR = ${LIBBUILD}/intl
+INTL_INC = @INTL_INC@
+LIBINTL_H = @LIBINTL_H@
+
+CCFLAGS = $(DEFS) $(LOCAL_DEFS) $(LOCAL_CFLAGS) $(CFLAGS)
+
+#
+# These values are generated for configure by ${topdir}/support/shobj-conf.
+# If your system is not supported by that script, but includes facilities for
+# dynamic loading of shared objects, please update the script and send the
+# changes to bash-maintainers@gnu.org.
+#
+SHOBJ_CC = @SHOBJ_CC@
+SHOBJ_CFLAGS = @SHOBJ_CFLAGS@
+SHOBJ_LD = @SHOBJ_LD@
+SHOBJ_LDFLAGS = @SHOBJ_LDFLAGS@ @LDFLAGS@
+SHOBJ_XLDFLAGS = @SHOBJ_XLDFLAGS@
+SHOBJ_LIBS = @SHOBJ_LIBS@
+SHOBJ_STATUS = @SHOBJ_STATUS@
+
+INC = -I$(headersdir) -I$(headersdir)/include -I$(headersdir)/builtins
+
+.c.o:
+	$(SHOBJ_CC) $(SHOBJ_CFLAGS) $(CCFLAGS) $(INC) -c -o $@ $<
+
+all:	example
+
+example:	example.o
+	$(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ example.o $(SHOBJ_LIBS)
+
+example.o: example.c
diff --git a/examples/loadables/README b/examples/loadables/README
new file mode 100644
index 0000000..6820c96
--- /dev/null
+++ b/examples/loadables/README
@@ -0,0 +1,76 @@
+Some examples of ready-to-dynamic-load builtins.  Most of the
+examples given are reimplementations of standard commands whose
+execution time is dominated by process startup time.  The
+exceptions are sleep, which allows you to sleep for fractions
+of a second, finfo, which provides access to the rest of the
+elements of the `stat' structure that `test' doesn't let you
+see, and pushd/popd/dirs, which allows you to compile them out
+of the shell.
+
+All of the new builtins in ksh93 that bash didn't already have
+are included here, as is the ksh `print' builtin.
+
+The configure script in the top-level source directory uses the
+support/shobj-conf script to set the right values in the Makefile,
+so you should not need to change the Makefile.  If your system
+is not supported by support/shobj-conf, and it has the necessary
+facilities for building shared objects and support for the
+dlopen/dlsyn/dlclose/dlerror family of functions, please make
+the necessary changes to support/shobj-conf and send the changes
+to bash-maintainers@gnu.org.
+
+Loadable builtins are loaded into a running shell with
+
+	enable -f filename builtin-name
+
+enable uses a simple reference-counting scheme to avoid unloading a
+shared object that implements more than one loadable builtin before
+all loadable builtins implemented in the object are removed.
+
+Many of the details needed by builtin writers are found in hello.c,
+the canonical example.  There is no real `builtin writers' programming
+guide'.  The file template.c provides a template to use for creating
+new loadable builtins.
+
+The file "Makefile.inc" is created using the same values that configure
+writes into Makefile.in, and is installed in the same directory as the
+rest of the example builtins. It's intended to be a start at something
+that can be modified or included to help you build your own loadables
+without having to search for the right CFLAGS and LDFLAGS.
+
+basename.c	Return non-directory portion of pathname.
+cat.c		cat(1) replacement with no options - the way cat was intended.
+dirname.c	Return directory portion of pathname.
+fdflags.c	Change the flag associated with one of bash's open file descriptors.
+finfo.c		Print file info.
+head.c		Copy first part of files.
+hello.c		Obligatory "Hello World" / sample loadable.
+id.c		POSIX.2 user identity.
+ln.c		Make links.
+loadables.h	File loadable builtins can include for shell definitions.
+logname.c	Print login name of current user.
+Makefile.in	Simple makefile for the sample loadable builtins.
+Makefile.inc.in	Sample makefile to use for loadable builtin development.
+mkdir.c		Make directories.
+mypid.c		Add $MYPID variable, demonstrate use of unload hook functio.n
+necho.c		echo without options or argument interpretation.
+pathchk.c	Check pathnames for validity and portability.
+print.c		Loadable ksh-93 style print builtin.
+printenv.c	Minimal builtin clone of BSD printenv(1).
+push.c		Anyone remember TOPS-20?
+realpath.c	Canonicalize pathnames, resolving symlinks.
+rm.c		Remove files and directories.
+rmdir.c		Remove directory.
+seq.c		Print a sequence of decimal or floating point numbers.
+setpgid.c	Set a process's pgrp; example of how to wrap a system call.
+sleep.c		sleep for fractions of a second.
+stat.c		populate an associative array with information about a file
+strftime.c	Loadable builtin interface to strftime(3).
+sync.c		Sync the disks by forcing pending filesystem writes to complete.
+tee.c		Duplicate standard input.
+template.c	Example template for loadable builtin.
+truefalse.c	True and false builtins.
+tty.c		Return terminal name.
+uname.c		Print system information.
+unlink.c	Remove a directory entry.
+whoami.c	Print out username of current user.
diff --git a/examples/loadables/accept.c b/examples/loadables/accept.c
new file mode 100644
index 0000000..54cf38c
--- /dev/null
+++ b/examples/loadables/accept.c
@@ -0,0 +1,234 @@
+/* accept - listen for and accept a remote network connection on a given port */
+
+/*
+   Copyright (C) 2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include "bashtypes.h"
+#include <errno.h>
+#include <time.h>
+#include "typemax.h"
+
+#include <sys/socket.h>
+#include <arpa/inet.h>
+#include <netinet/in.h>
+
+#include "loadables.h"
+
+static int accept_bind_variable (char *, int);
+
+int
+accept_builtin (list)
+     WORD_LIST *list;
+{
+  WORD_LIST *l;
+  SHELL_VAR *v;
+  intmax_t iport;
+  int opt;
+  char *tmoutarg, *fdvar, *rhostvar, *rhost;
+  unsigned short uport;
+  int servsock, clisock;
+  struct sockaddr_in server, client;
+  socklen_t clientlen;
+  struct timeval timeval;
+  struct linger linger = { 0, 0 };
+
+  rhostvar = tmoutarg = fdvar = rhost = (char *)NULL;
+
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "r:t:v:")) != -1)
+    {
+      switch (opt)
+	{
+	case 'r':
+	  rhostvar = list_optarg;
+	  break;
+	case 't':
+	  tmoutarg = list_optarg;
+	  break;
+	case 'v':
+	  fdvar = list_optarg;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  
+  list = loptend;
+
+  /* Validate input and variables */
+  if (tmoutarg)
+    {
+      long ival, uval;
+      opt = uconvert (tmoutarg, &ival, &uval, (char **)0);
+      if (opt == 0 || ival < 0 || uval < 0)
+	{
+	  builtin_error ("%s: invalid timeout specification", tmoutarg);
+	  return (EXECUTION_FAILURE);
+	}
+      timeval.tv_sec = ival;
+      timeval.tv_usec = uval;
+      /* XXX - should we warn if ival == uval == 0 ? */
+    }
+
+  if (list == 0)
+    {
+      builtin_usage ();
+      return (EX_USAGE);
+    }
+
+  if (legal_number (list->word->word, &iport) == 0 || iport < 0 || iport > TYPE_MAXIMUM (unsigned short))
+    {
+      builtin_error ("%s: invalid port number", list->word->word);
+      return (EXECUTION_FAILURE);
+    }
+  uport = (unsigned short)iport;
+
+  if (fdvar == 0)
+    fdvar = "ACCEPT_FD";
+
+  unbind_variable (fdvar);
+  if (rhostvar)
+    unbind_variable (rhostvar);
+    
+  if ((servsock = socket (AF_INET, SOCK_STREAM, IPPROTO_IP)) < 0)
+    {
+      builtin_error ("cannot create socket: %s", strerror (errno));
+      return (EXECUTION_FAILURE);
+    }
+
+  memset ((char *)&server, 0, sizeof (server));
+  server.sin_family = AF_INET;
+  server.sin_port = htons(uport);
+  server.sin_addr.s_addr = htonl(INADDR_ANY);
+
+  if (bind (servsock, (struct sockaddr *)&server, sizeof (server)) < 0)
+    {
+      builtin_error ("socket bind failure: %s", strerror (errno));
+      close (servsock);
+      return (EXECUTION_FAILURE);
+    }
+
+  opt = 1;
+  setsockopt (servsock, SOL_SOCKET, SO_REUSEADDR, (void *)&opt, sizeof (opt));
+  setsockopt (servsock, SOL_SOCKET, SO_LINGER, (void *)&linger, sizeof (linger));
+
+  if (listen (servsock, 1) < 0)
+    {
+      builtin_error ("listen failure: %s", strerror (errno));
+      close (servsock);
+      return (EXECUTION_FAILURE);
+    }
+
+  if (tmoutarg)
+    {
+      fd_set iofds;
+
+      FD_ZERO(&iofds);
+      FD_SET(servsock, &iofds);
+
+      opt = select (servsock+1, &iofds, 0, 0, &timeval);
+      if (opt < 0)
+        builtin_error ("select failure: %s", strerror (errno));
+      if (opt <= 0)
+        {
+          close (servsock);
+          return (EXECUTION_FAILURE);
+        }
+    }
+
+  clientlen = sizeof (client);
+  if ((clisock = accept (servsock, (struct sockaddr *)&client, &clientlen)) < 0)
+    {
+      builtin_error ("client accept failure: %s", strerror (errno));
+      close (servsock);
+      return (EXECUTION_FAILURE);
+    }
+
+  close (servsock);
+
+  accept_bind_variable (fdvar, clisock);  
+  if (rhostvar)
+    {
+      rhost = inet_ntoa (client.sin_addr);
+      v = builtin_bind_variable (rhostvar, rhost, 0);
+      if (v == 0 || readonly_p (v) || noassign_p (v))
+	builtin_error ("%s: cannot set variable", rhostvar);
+    }
+
+  return (EXECUTION_SUCCESS);
+}
+
+static int
+accept_bind_variable (varname, intval)
+     char *varname;
+     int intval;
+{
+  SHELL_VAR *v;
+  char ibuf[INT_STRLEN_BOUND (int) + 1], *p;
+
+  p = fmtulong (intval, 10, ibuf, sizeof (ibuf), 0);
+  v = builtin_bind_variable (varname, p, 0);
+  if (v == 0 || readonly_p (v) || noassign_p (v))
+    builtin_error ("%s: cannot set variable", varname);
+  return (v != 0);
+}
+
+char *accept_doc[] = {
+	"Accept a network connection on a specified port.",
+	""
+	"This builtin allows a bash script to act as a TCP/IP server.",
+	"",
+	"Options, if supplied, have the following meanings:",
+	"    -t timeout    wait TIMEOUT seconds for a connection. TIMEOUT may",
+	"                  be a decimal number including a fractional portion",
+	"    -v varname    store the numeric file descriptor of the connected",
+	"                  socket into VARNAME. The default VARNAME is ACCEPT_FD",
+	"    -r rhost      store the IP address of the remote host into the shell",
+	"                  variable RHOST, in dotted-decimal notation",
+	"",
+	"If successful, the shell variable ACCEPT_FD, or the variable named by the",
+	"-v option, will be set to the fd of the connected socket, suitable for",
+	"use as 'read -u$ACCEPT_FD'. RHOST, if supplied, will hold the IP address",
+	"of the remote client. The return status is 0.",
+	"",
+	"On failure, the return status is 1 and ACCEPT_FD (or VARNAME) and RHOST,",
+	"if supplied, will be unset.",
+	"",
+	"The server socket fd will be closed before accept returns.",
+	(char *) NULL
+};
+
+struct builtin accept_struct = {
+	"accept",		/* builtin name */
+	accept_builtin,		/* function implementing the builtin */
+	BUILTIN_ENABLED,	/* initial flags for builtin */
+	accept_doc,		/* array of long documentation strings. */
+	"accept [-t timeout] [-v varname] [-r addrvar ] port",		/* usage synopsis; becomes short_doc */
+	0			/* reserved for internal use */
+};
diff --git a/examples/loadables/asort.c b/examples/loadables/asort.c
new file mode 100644
index 0000000..e847ef8
--- /dev/null
+++ b/examples/loadables/asort.c
@@ -0,0 +1,279 @@
+/*
+   Copyright (C) 2020 Free Software Foundation, Inc.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdlib.h>
+#include <string.h>
+#include <inttypes.h>
+
+#include "bashtypes.h"
+#include "shell.h"
+#include "builtins.h"
+#include "common.h"
+#include "xmalloc.h"
+#include "bashgetopt.h"
+
+typedef struct sort_element {
+    ARRAY_ELEMENT *v;   // used when sorting array in-place
+    char *key;          // used when sorting assoc array
+    char *value;        // points to value of array element or assoc entry
+    double num;         // used for numeric sort
+} sort_element;
+
+static int reverse_flag;
+static int numeric_flag;
+
+static int
+compare(const void *p1, const void *p2) {
+    const sort_element e1 = *(sort_element *) p1;
+    const sort_element e2 = *(sort_element *) p2;
+
+    if (numeric_flag) {
+        if (reverse_flag)
+            return (e2.num > e1.num) ? 1 : (e2.num < e1.num) ? -1 : 0;
+        else
+            return (e1.num > e2.num) ? 1 : (e1.num < e2.num) ? -1 : 0;
+    }
+    else {
+        if (reverse_flag)
+            return strcoll(e2.value, e1.value);
+        else
+            return strcoll(e1.value, e2.value);
+    }
+}
+
+static int
+sort_index(SHELL_VAR *dest, SHELL_VAR *source) {
+    HASH_TABLE *hash;
+    BUCKET_CONTENTS *bucket;
+    sort_element *sa;
+    ARRAY *array, *dest_array;
+    ARRAY_ELEMENT *ae;
+    size_t i, j, n;
+    char ibuf[INT_STRLEN_BOUND (intmax_t) + 1]; // used by fmtulong
+    char *key;
+
+    dest_array = array_cell(dest);
+
+    if (assoc_p(source)) {
+        hash = assoc_cell(source);
+        n = hash->nentries;
+        sa = xmalloc(n * sizeof(sort_element));
+        i = 0;
+        for ( j = 0; j < hash->nbuckets; ++j ) {
+            bucket = hash->bucket_array[j];
+            while ( bucket ) {
+                sa[i].v = NULL;
+                sa[i].key = bucket->key;
+                if ( numeric_flag )
+                    sa[i].num = strtod(bucket->data, NULL);
+                else
+                    sa[i].value = bucket->data;
+                i++;
+                bucket = bucket->next;
+            }
+        }
+    }
+    else {
+        array = array_cell(source);
+        n = array_num_elements(array);
+        sa = xmalloc(n * sizeof(sort_element));
+        i = 0;
+
+        for (ae = element_forw(array->head); ae != array->head; ae = element_forw(ae)) {
+            sa[i].v = ae;
+            if (numeric_flag)
+                sa[i].num = strtod(element_value(ae), NULL);
+            else
+                sa[i].value = element_value(ae);
+            i++;
+        }
+    }
+
+    // sanity check
+    if ( i != n ) {
+        builtin_error("%s: corrupt array", source->name);
+        return EXECUTION_FAILURE;
+    }
+
+    qsort(sa, n, sizeof(sort_element), compare);
+
+    array_flush(dest_array);
+
+    for ( i = 0; i < n; ++i ) {
+        if ( assoc_p(source) )
+            key = sa[i].key;
+        else
+            key = fmtulong((long unsigned)sa[i].v->ind, 10, ibuf, sizeof(ibuf), 0);
+
+        array_insert(dest_array, i, key);
+    }
+
+    return EXECUTION_SUCCESS;
+}
+
+static int
+sort_inplace(SHELL_VAR *var) {
+    size_t i, n;
+    ARRAY *a;
+    ARRAY_ELEMENT *ae;
+    sort_element *sa = 0;
+
+    a = array_cell(var);
+    n = array_num_elements(a);
+
+    if ( n == 0 )
+        return EXECUTION_SUCCESS;
+
+    sa = xmalloc(n * sizeof(sort_element));
+
+    i = 0;
+    for (ae = element_forw(a->head); ae != a->head; ae = element_forw(ae)) {
+        sa[i].v = ae;
+        if (numeric_flag)
+            sa[i].num = strtod(element_value(ae), NULL);
+        else
+            sa[i].value = element_value(ae);
+        i++;
+    }
+
+    // sanity check
+    if ( i != n ) {
+        builtin_error("%s: corrupt array", var->name);
+        return EXECUTION_FAILURE;
+    }
+
+    qsort(sa, n, sizeof(sort_element), compare);
+
+    // for in-place sort, simply "rewire" the array elements
+    sa[0].v->prev = sa[n-1].v->next = a->head;
+    a->head->next = sa[0].v;
+    a->head->prev = sa[n-1].v;
+    a->max_index = n - 1;
+    for (i = 0; i < n; i++) {
+        sa[i].v->ind = i;
+        if (i > 0)
+            sa[i].v->prev = sa[i-1].v;
+        if (i < n - 1)
+            sa[i].v->next = sa[i+1].v;
+    }
+    xfree(sa);
+    return EXECUTION_SUCCESS;
+}
+
+int
+asort_builtin(WORD_LIST *list) {
+    SHELL_VAR *var, *var2;
+    char *word;
+    int opt, ret;
+    int index_flag = 0;
+
+    numeric_flag = 0;
+    reverse_flag = 0;
+
+    reset_internal_getopt();
+    while ((opt = internal_getopt(list, "inr")) != -1) {
+        switch (opt) {
+            case 'i': index_flag = 1; break;
+            case 'n': numeric_flag = 1; break;
+            case 'r': reverse_flag = 1; break;
+            CASE_HELPOPT;
+            default:
+                builtin_usage();
+                return (EX_USAGE);
+        }
+    }
+    list = loptend;
+
+    if (list == 0) {
+        builtin_usage();
+        return EX_USAGE;
+    }
+
+    if (legal_identifier (list->word->word) == 0) {
+        sh_invalidid (list->word->word);
+        return EXECUTION_FAILURE;
+    }
+
+    if ( index_flag ) {
+        if ( list->next == 0 || list->next->next ) {
+            builtin_usage();
+            return EX_USAGE;
+        }
+        if (legal_identifier (list->next->word->word) == 0) {
+            sh_invalidid (list->next->word->word);
+            return EXECUTION_FAILURE;
+        }
+        var = find_or_make_array_variable(list->word->word, 1);
+        if (var == 0)
+            return EXECUTION_FAILURE;
+        var2 = find_variable(list->next->word->word);
+        if ( !var2 || ( !array_p(var2) && !assoc_p(var2) ) ) {
+            builtin_error("%s: Not an array", list->next->word->word);
+            return EXECUTION_FAILURE;
+        }
+        return sort_index(var, var2);
+    }
+
+    while (list) {
+        word = list->word->word;
+        var = find_variable(word);
+        list = list->next;
+
+        if (var == 0 || array_p(var) == 0) {
+            builtin_error("%s: Not an array", word);
+            continue;
+        }
+        if (readonly_p(var) || noassign_p(var)) {
+            if (readonly_p(var))
+                err_readonly(word);
+            continue;
+        }
+
+        if ( (ret = sort_inplace(var)) != EXECUTION_SUCCESS )
+            return ret;
+    }
+    return EXECUTION_SUCCESS;
+
+}
+
+char *asort_doc[] = {
+    "Sort arrays in-place.",
+    "",
+    "Options:",
+    "  -n  compare according to string numerical value",
+    "  -r  reverse the result of comparisons",
+    "  -i  sort using indices/keys",
+    "",
+    "If -i is supplied, SOURCE is not sorted in-place, but the indices (or keys",
+    "if associative) of SOURCE, after sorting it by its values, are placed as",
+    "values in the indexed array DEST",
+    "",
+    "Associative arrays may not be sorted in-place.",
+    "",
+    "Exit status:",
+    "Return value is zero unless an error happened (like invalid variable name",
+    "or readonly array).",
+    (char *)NULL
+};
+
+struct builtin asort_struct = {
+    "asort",
+    asort_builtin,
+    BUILTIN_ENABLED,
+    asort_doc,
+    "asort [-nr] array ...  or  asort [-nr] -i dest source",
+    0
+};
diff --git a/examples/loadables/basename.c b/examples/loadables/basename.c
new file mode 100644
index 0000000..29dd1a6
--- /dev/null
+++ b/examples/loadables/basename.c
@@ -0,0 +1,131 @@
+/* basename - return nondirectory portion of pathname */
+
+/* See Makefile for compilation details. */
+
+/*
+   Copyright (C) 1999-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include "builtins.h"
+#include "shell.h"
+#include "common.h"
+#include "bashgetopt.h"
+
+int
+basename_builtin (list)
+     WORD_LIST *list;
+{
+  int slen, sufflen, off;
+  char *string, *suffix, *fn;
+
+  if (no_options (list))
+    return (EX_USAGE);
+  list = loptend;
+  if (list == 0)
+    {
+      builtin_usage ();
+      return (EX_USAGE);
+    }    
+
+  string = list->word->word;
+  suffix = (char *)NULL;
+  if (list->next)
+    {
+      list = list->next;
+      suffix = list->word->word;
+    }
+
+  if (list->next)
+    {
+      builtin_usage ();
+      return (EX_USAGE);
+    }
+
+  slen = strlen (string);
+
+  /* Strip trailing slashes */
+  while (slen > 0 && string[slen - 1] == '/')
+    slen--;
+
+  /* (2) If string consists entirely of slash characters, string shall be
+	 set to a single slash character.  In this case, skip steps (3)
+	 through (5). */
+  if (slen == 0)
+    {
+      fputs ("/\n", stdout);
+      return (EXECUTION_SUCCESS);
+    }
+
+  /* (3) If there are any trailing slash characters in string, they
+	 shall be removed. */
+  string[slen] = '\0';
+
+  /* (4) If there are any slash characters remaining in string, the prefix
+	 of string up to an including the last slash character in string
+	 shall be removed. */
+  while (--slen >= 0)
+    if (string[slen] == '/')
+      break;
+
+  fn = string + slen + 1;
+
+  /* (5) If the suffix operand is present, is not identical to the
+	 characters remaining in string, and is identical to a suffix
+	 of the characters remaining in string, the suffix suffix
+	 shall be removed from string.  Otherwise, string shall not be
+	 modified by this step. */
+  if (suffix)
+    {
+      sufflen = strlen (suffix);
+      slen = strlen (fn);
+      if (sufflen < slen)
+        {
+          off = slen - sufflen;
+          if (strcmp (fn + off, suffix) == 0)
+            fn[off] = '\0';
+        }
+    }
+  printf ("%s\n", fn);
+  return (EXECUTION_SUCCESS);
+}
+
+char *basename_doc[] = {
+	"Return non-directory portion of pathname.",
+	"",
+	"The STRING is converted to a filename corresponding to the last",
+	"pathname component in STRING.  If the suffix string SUFFIX is",
+	"supplied, it is removed.",
+	(char *)NULL
+};
+
+/* The standard structure describing a builtin command.  bash keeps an array
+   of these structures. */
+struct builtin basename_struct = {
+	"basename",		/* builtin name */
+	basename_builtin,	/* function implementing the builtin */
+	BUILTIN_ENABLED,	/* initial flags for builtin */
+	basename_doc,		/* array of long documentation strings. */
+	"basename string [suffix]",	/* usage synopsis */
+	0			/* reserved for internal use */
+};
diff --git a/examples/loadables/cat.c b/examples/loadables/cat.c
new file mode 100644
index 0000000..be99c4c
--- /dev/null
+++ b/examples/loadables/cat.c
@@ -0,0 +1,122 @@
+/*
+ * cat replacement
+ *
+ * no options - the way cat was intended
+ */
+
+/*
+   Copyright (C) 1999-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <fcntl.h>
+#include <errno.h>
+
+#include "builtins.h"
+#include "shell.h"
+
+#ifndef errno
+extern int errno;
+#endif
+
+extern char *strerror ();
+extern char **make_builtin_argv ();
+
+static int
+fcopy(fd)
+int	fd;
+{
+	char	buf[1024], *s;
+	int	n, w, e;
+
+	while (n = read(fd, buf, sizeof (buf))) {
+		w = write(1, buf, n);
+		if (w != n) {
+			e = errno;
+			write(2, "cat: write error: ", 18);
+			s = strerror(e);
+			write(2, s, strlen(s));
+			write(2, "\n", 1);
+			return 1;
+		}
+	}
+	return 0;
+}
+
+int
+cat_main (argc, argv)
+int	argc;
+char	**argv;
+{
+	int	i, fd, r;
+	char	*s;
+
+	if (argc == 1)
+		return (fcopy(0));
+
+	for (i = r = 1; i < argc; i++) {
+		if (argv[i][0] == '-' && argv[i][1] == '\0')
+			fd = 0;
+		else {
+			fd = open(argv[i], O_RDONLY, 0666);
+			if (fd < 0) {
+				s = strerror(errno);
+				write(2, "cat: cannot open ", 17);
+				write(2, argv[i], strlen(argv[i]));
+				write(2, ": ", 2);
+				write(2, s, strlen(s));
+				write(2, "\n", 1);
+				continue;
+			}
+		}
+		r = fcopy(fd);
+		if (fd != 0)
+			close(fd);
+	}
+	return (r);
+}
+
+int
+cat_builtin(list)
+WORD_LIST *list;
+{
+	char	**v;
+	int	c, r;
+
+	v = make_builtin_argv(list, &c);
+	r = cat_main(c, v);
+	free(v);
+
+	return r;
+}
+
+char *cat_doc[] = {
+	"Display files.",
+	"",
+	"Read each FILE and display it on the standard output.   If any",
+	"FILE is `-' or if no FILE argument is given, the standard input",
+	"is read.",
+	(char *)0
+};
+
+struct builtin cat_struct = {
+	"cat",
+	cat_builtin,
+	BUILTIN_ENABLED,
+	cat_doc,
+	"cat [-] [file ...]",
+	0
+};
diff --git a/examples/loadables/csv.c b/examples/loadables/csv.c
new file mode 100644
index 0000000..11228f1
--- /dev/null
+++ b/examples/loadables/csv.c
@@ -0,0 +1,206 @@
+/* csv - process a line of csv data and populate an indexed array with the
+	 fields */
+
+/*
+   Copyright (C) 2020 Free Software Foundation, Inc.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* See Makefile for compilation details. */
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+#include "bashansi.h"
+#include <stdio.h>
+
+#include "loadables.h"
+
+#define CSV_ARRAY_DEFAULT	"CSV"
+
+#define NQUOTE	0
+#define DQUOTE	1
+
+/* Split LINE into comma-separated fields, storing each field into a separate
+   element of array variable CSV, starting at index 0. The format of LINE is
+   as described in RFC 4180. */
+static int
+csvsplit (csv, line)
+     SHELL_VAR *csv;
+     char *line;
+{
+  arrayind_t ind;
+  char *field, *prev, *buf, *xbuf;
+  int delim, qstate;
+  int b, rval;
+
+  xbuf = 0;
+  ind = 0;
+  field = prev = line;
+
+  do
+    {
+      if (*prev == '"')
+	{
+	  if (xbuf == 0)
+	    xbuf = xmalloc (strlen (prev) + 1);
+	  buf = xbuf;
+	  b = 0;
+	  qstate = DQUOTE;
+	  for (field = ++prev; *field; field++)
+	    {
+	      if (qstate == DQUOTE && *field == '"' && field[1] == '"')
+		buf[b++] = *field++;	/* skip double quote */
+	      else if (qstate == DQUOTE && *field == '"')
+	        qstate = NQUOTE;
+	      else if (qstate == NQUOTE && *field == ',')
+		break;
+	      else
+		/* This copies any text between a closing double quote and the
+		   delimiter. If you want to change that, make sure to do the
+		   copy only if qstate == DQUOTE. */
+		buf[b++] = *field;
+	    }
+	  buf[b] = '\0';
+	}
+      else
+	{
+	  buf = prev;
+	  field = prev + strcspn (prev, ",");
+	}
+
+      delim = *field;
+      *field = '\0';
+
+      bind_array_element (csv, ind, buf, 0);
+      ind++;
+
+      *field = delim;
+
+      if (delim == ',')
+	prev = field + 1;
+    }
+  while (delim == ',');
+
+  if (xbuf)
+    free (xbuf);
+
+  return (rval = ind);				/* number of fields */
+}
+
+int
+csv_builtin (list)
+     WORD_LIST *list;
+{
+  int opt, rval;
+  char *array_name, *csvstring;
+  SHELL_VAR *v;
+
+  array_name = 0;
+  rval = EXECUTION_SUCCESS;
+
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "a:")) != -1)
+    {
+      switch (opt)
+	{
+	case 'a':
+	  array_name = list_optarg;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+  if (array_name == 0)
+    array_name = CSV_ARRAY_DEFAULT;
+
+  if (legal_identifier (array_name) == 0)
+    {
+      sh_invalidid (array_name);
+      return (EXECUTION_FAILURE);
+    }
+
+  if (list == 0)
+    {
+      builtin_error ("csv string argument required");
+      return (EX_USAGE);
+    }
+
+  v = find_or_make_array_variable (array_name, 1);
+  if (v == 0 || readonly_p (v) || noassign_p (v))
+    {
+      if (v && readonly_p (v))
+	err_readonly (array_name);
+      return (EXECUTION_FAILURE);
+    }
+  else if (array_p (v) == 0)
+    {
+      builtin_error ("%s: not an indexed array", array_name);
+      return (EXECUTION_FAILURE);
+    }
+  if (invisible_p (v))
+    VUNSETATTR (v, att_invisible);
+  array_flush (array_cell (v));
+
+  csvstring = list->word->word;
+
+  if (csvstring == 0 || *csvstring == 0)
+    return (EXECUTION_SUCCESS);
+
+  opt = csvsplit (v, csvstring);
+  /* Maybe do something with OPT here, it's the number of fields */
+
+  return (rval);
+}
+
+/* Called when builtin is enabled and loaded from the shared object.  If this
+   function returns 0, the load fails. */
+int
+csv_builtin_load (name)
+     char *name;
+{
+  return (1);
+}
+
+/* Called when builtin is disabled. */
+void
+csv_builtin_unload (name)
+     char *name;
+{
+}
+
+char *csv_doc[] = {
+	"Read comma-separated fields from a string.",
+	"",
+	"Parse STRING, a line of comma-separated values, into individual fields,",
+	"and store them into the indexed array ARRAYNAME starting at index 0.",
+	"If ARRAYNAME is not supplied, \"CSV\" is the default array name.",
+	(char *)NULL
+};
+
+struct builtin csv_struct = {
+	"csv",			/* builtin name */
+	csv_builtin,		/* function implementing the builtin */
+	BUILTIN_ENABLED,	/* initial flags for builtin */
+	csv_doc,		/* array of long documentation strings. */
+	"csv [-a ARRAY] string",	/* usage synopsis; becomes short_doc */
+	0			/* reserved for internal use */
+};
diff --git a/examples/loadables/cut.c b/examples/loadables/cut.c
new file mode 100644
index 0000000..ad9a833
--- /dev/null
+++ b/examples/loadables/cut.c
@@ -0,0 +1,625 @@
+/* cut,lcut - extract specified fields from a line and assign them to an array
+	      or print them to the standard output */
+
+/*
+   Copyright (C) 2020 Free Software Foundation, Inc.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* See Makefile for compilation details. */
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+#include "bashansi.h"
+#include <stdio.h>
+#include <fcntl.h>
+#include <errno.h>
+
+#include "loadables.h"
+#include "shmbutil.h"
+
+#define CUT_ARRAY_DEFAULT	"CUTFIELDS"
+
+#define NOPOS	-2		/* sentinel for unset startpos/endpos */
+
+#define BOL	0		
+#define EOL	INT_MAX
+#define NORANGE	-1		/* just a position, no range */
+
+#define BFLAG	(1 << 0)
+#define CFLAG	(1 << 1)
+#define DFLAG	(1 << 2)
+#define FFLAG	(1 << 3)
+#define SFLAG	(1 << 4)
+
+struct cutpos
+{
+  int startpos, endpos;		/* zero-based, correction done in getlist() */
+};
+
+struct cutop
+{
+  int flags;
+  int delim;
+  int npos;
+  struct cutpos *poslist;
+};
+
+static int
+poscmp (a, b)
+     void *a, *b;
+{
+  struct cutpos *p1, *p2;
+
+  p1 = (struct cutpos *)a;
+  p2 = (struct cutpos *)b;
+  return (p1->startpos - p2->startpos);
+}
+
+static int
+getlist (arg, opp)
+     char *arg;
+     struct cutpos **opp;
+{
+  char *ntok, *ltok, *larg;
+  int s, e;
+  intmax_t num;
+  struct cutpos *poslist;
+  int npos, nsize;
+
+  poslist = 0;
+  nsize = npos = 0;
+  s = e = 0;
+  larg = arg;
+  while (ltok = strsep (&larg, ","))
+    {
+      if (*ltok == 0)
+        continue;
+
+      ntok = strsep (&ltok, "-");
+      if (*ntok == 0)
+        s = BOL;
+      else
+	{
+	  if (legal_number (ntok, &num) == 0 || (int)num != num || num <= 0)
+	    {
+	      builtin_error ("%s: invalid list value", ntok);
+	      *opp = poslist;
+	      return -1;
+	    }
+	  s = num;
+	  s--;		/* fields are 1-based */
+	}
+      if (ltok == 0)
+	e = NORANGE;
+      else if (*ltok == 0)
+	e = EOL;
+      else
+	{
+	  if (legal_number (ltok, &num) == 0 || (int)num != num || num <= 0)
+	    {
+	      builtin_error ("%s: invalid list value", ltok);
+	      *opp = poslist;
+	      return -1;
+	    }
+	  e = num;
+	  e--;
+	  if (e == s)
+	    e = NORANGE;
+	}
+
+      if (npos == nsize)
+	{
+	  nsize += 4;
+	  poslist = (struct cutpos *)xrealloc (poslist, nsize * sizeof (struct cutpos));
+	}
+      poslist[npos].startpos = s;
+      poslist[npos].endpos = e; 
+      npos++;
+    }
+  if (npos == 0)
+    {
+      builtin_error ("missing list of positions");
+      *opp = poslist;
+      return -1;
+    }
+
+  qsort (poslist, npos, sizeof(poslist[0]), poscmp);
+  *opp = poslist;
+
+  return npos;
+}
+
+static int
+cutbytes (v, line, ops)
+     SHELL_VAR *v;
+     char *line;
+     struct cutop *ops;
+{
+  arrayind_t ind;
+  char *buf, *bmap;
+  size_t llen;
+  int i, b, n, s, e;
+
+  llen = strlen (line);
+  buf = xmalloc (llen + 1);
+  bmap = xmalloc (llen + 1);
+  memset (bmap, 0, llen);
+
+  for (n = 0; n < ops->npos; n++)
+    {
+      s = ops->poslist[n].startpos;		/* no translation needed yet */
+      e = ops->poslist[n].endpos;
+      if (e == NORANGE)
+        e = s;
+      else if (e == EOL || e >= llen)
+	e = llen - 1;
+      /* even if a column is specified multiple times, it will only be printed
+         once */
+      for (i = s; i <= e; i++)
+	bmap[i] = 1;
+    }
+
+  b = 0;
+  for (i = 0; i < llen; i++)
+    if (bmap[i])
+      buf[b++] = line[i];
+  buf[b] = 0; 
+
+  if (v)
+    {
+      ind = 0;
+      bind_array_element (v, ind, buf, 0);
+      ind++;
+    }
+  else
+    printf ("%s\n", buf);
+
+  free (buf);
+  free (bmap);
+
+  return ind;
+}
+
+static int
+cutchars (v, line, ops)
+     SHELL_VAR *v;
+     char *line;
+     struct cutop *ops;
+{
+  arrayind_t ind;
+  char *buf, *bmap;
+  wchar_t *wbuf, *wb2;
+  size_t llen, wlen;
+  int i, b, n, s, e;
+
+  if (MB_CUR_MAX == 1)
+    return (cutbytes (v, line, ops));
+  if (locale_utf8locale && utf8_mbsmbchar (line) == 0)
+    return (cutbytes (v, line, ops));
+
+  llen = strlen (line);
+  wbuf = (wchar_t *)xmalloc ((llen + 1) * sizeof (wchar_t));
+
+  wlen = mbstowcs (wbuf, line, llen);
+  if (MB_INVALIDCH (wlen))
+    {
+      free (wbuf);
+      return (cutbytes (v, line, ops));
+    }
+
+  bmap = xmalloc (llen + 1);
+  memset (bmap, 0, llen);
+  
+  for (n = 0; n < ops->npos; n++)
+    {
+      s = ops->poslist[n].startpos;		/* no translation needed yet */
+      e = ops->poslist[n].endpos;
+      if (e == NORANGE)
+        e = s;
+      else if (e == EOL || e >= wlen)
+	e = wlen - 1;
+      /* even if a column is specified multiple times, it will only be printed
+         once */
+      for (i = s; i <= e; i++)
+	bmap[i] = 1;
+    }
+
+  wb2 = (wchar_t *)xmalloc ((wlen + 1) * sizeof (wchar_t));
+  b = 0;
+  for (i = 0; i < wlen; i++)
+    if (bmap[i])
+      wb2[b++] = wbuf[i];
+  wb2[b] = 0;
+
+  free (wbuf);
+
+  buf = bmap;
+  n = wcstombs (buf, wb2, llen);
+
+  if (v)
+    {
+      ind = 0;
+      bind_array_element (v, ind, buf, 0);
+      ind++;
+    }
+  else
+    printf ("%s\n", buf);
+
+  free (buf);
+  free (wb2);
+
+  return ind;
+}
+
+/* The basic strategy is to cut the line into fields using strsep, populate
+   an array of fields from 0..nf, then select those fields using the same
+   bitmap approach as cut{bytes,chars} and assign them to the array variable
+   V or print them on stdout. This function obeys SFLAG. */
+static int
+cutfields (v, line, ops)
+     SHELL_VAR *v;
+     char *line;
+     struct cutop *ops;
+{
+  arrayind_t ind;
+  char *buf, *bmap, *field, **fields, delim[2];
+  size_t llen, fsize;
+  int i, b, n, s, e, nf;
+
+  ind = 0;
+
+  delim[0] = ops->delim;
+  delim[1] = '\0';
+
+  fields = 0;
+  nf = 0;
+  fsize = 0;
+
+  field = buf = line;
+  do
+    {
+      field = strsep (&buf, delim);	/* destructive */
+      if (nf == fsize)
+	{
+	  fsize += 8;
+	  fields = xrealloc (fields, fsize * sizeof (char *));
+	}
+      fields[nf] = field;
+      if (field)
+	nf++;
+    }
+  while (field);
+
+  if (nf == 1)
+    {
+      free (fields);
+      if (ops->flags & SFLAG)
+	return ind;
+      if (v)
+	{
+	  bind_array_element (v, ind, line, 0);
+	  ind++;
+	}
+      else
+	printf ("%s\n", line);
+      return ind;
+    }
+
+  bmap = xmalloc (nf + 1);
+  memset (bmap, 0, nf);
+
+  for (n = 0; n < ops->npos; n++)
+    {
+      s = ops->poslist[n].startpos;		/* no translation needed yet */
+      e = ops->poslist[n].endpos;
+      if (e == NORANGE)
+        e = s;
+      else if (e == EOL || e >= nf)
+	e = nf - 1;
+      /* even if a column is specified multiple times, it will only be printed
+         once */
+      for (i = s; i <= e; i++)
+	bmap[i] = 1;
+    }
+
+  for (i = 1, b = 0; b < nf; b++)
+    {
+      if (bmap[b] == 0)
+	continue;
+      if (v)
+	{
+	  bind_array_element (v, ind, fields[b], 0);
+	  ind++;
+	}
+      else
+	{
+	  if (i == 0)
+	    putchar (ops->delim);
+	  printf ("%s", fields[b]);
+	}
+      i = 0;
+    }
+  if (v == 0)
+    putchar ('\n');
+
+  return nf;
+}
+
+static int
+cutline (v, line, ops)
+     SHELL_VAR *v;
+     char *line;
+     struct cutop *ops;
+{
+  int rval;
+
+  if (ops->flags & BFLAG)
+    rval = cutbytes (v, line, ops);
+  else if (ops->flags & CFLAG)
+    rval = cutchars (v, line, ops);
+  else
+    rval = cutfields (v, line, ops);
+
+  return (rval >= 0 ? EXECUTION_SUCCESS : EXECUTION_FAILURE);
+}
+
+static int
+cutfile (v, list, ops)
+     SHELL_VAR *v;
+     WORD_LIST *list;
+     struct cutop *ops;
+{
+  int fd, unbuffered_read;
+  char *line, *b;
+  size_t llen;
+  WORD_LIST *l;
+  ssize_t n;
+
+  line = 0;
+  llen = 0;
+
+  l = list;
+  do
+    {
+      /* for each file */
+      if (l == 0 || (l->word->word[0] == '-' && l->word->word[1] == '\0'))
+	fd = 0;
+      else
+	fd = open (l->word->word, O_RDONLY);
+      if (fd < 0)
+	{
+	  file_error (l->word->word);
+	  return (EXECUTION_FAILURE);
+	}
+
+#ifndef __CYGWIN__
+      unbuffered_read = (lseek (fd, 0L, SEEK_CUR) < 0) && (errno == ESPIPE);
+#else
+      unbuffered_read = 1;
+#endif
+
+      while ((n = zgetline (fd, &line, &llen, '\n', unbuffered_read)) != -1)
+	  cutline (v, line, ops);		/* can modify line */
+      if (fd > 0)
+	close (fd);
+
+      if (l)
+	l = l->next;
+    }
+  while (l);
+
+  free (line);
+  return EXECUTION_SUCCESS;
+}
+
+#define OPTSET(x)	     ((cutflags & (x)) ? 1 : 0)
+
+static int
+cut_internal (which, list)
+     int which;				/* not used yet */
+     WORD_LIST *list;
+{
+  int opt, rval, cutflags, delim, npos;
+  char *array_name, *cutstring, *list_arg;
+  SHELL_VAR *v;
+  struct cutop op;
+  struct cutpos *poslist;
+
+  v = 0;
+  rval = EXECUTION_SUCCESS;
+
+  cutflags = 0;
+  array_name = 0;
+  list_arg = 0;
+  delim = '\t';
+
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "a:b:c:d:f:sn")) != -1)
+    {
+      switch (opt)
+	{
+	case 'a':
+	  array_name = list_optarg;
+	  break;
+	case 'b':
+	  cutflags |= BFLAG;
+	  list_arg = list_optarg;
+	  break;
+	case 'c':
+	  cutflags |= CFLAG;
+	  list_arg = list_optarg;
+	  break;
+	case 'd':
+	  cutflags |= DFLAG;
+	  delim = list_optarg[0];
+	  if (delim == 0 || list_optarg[1])
+	    {
+	      builtin_error ("delimiter must be a single non-null character");
+	      return (EX_USAGE);
+	    }
+	  break;
+	case 'f':
+	  cutflags |= FFLAG;
+	  list_arg = list_optarg;
+	  break;
+	case 'n':
+	  break;
+	case 's':
+	  cutflags |= SFLAG;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+  if (array_name && (legal_identifier (array_name) == 0))
+    {
+      sh_invalidid (array_name);
+      return (EXECUTION_FAILURE);
+    }
+
+  if (list == 0 && which == 0)
+    {
+      builtin_error ("string argument required");
+      return (EX_USAGE);
+    }
+
+  /* options are mutually exclusive and one is required */
+  if ((OPTSET (BFLAG) + OPTSET (CFLAG) + OPTSET (FFLAG)) != 1)
+    {
+      builtin_usage ();
+      return (EX_USAGE);
+    }
+
+  if ((npos = getlist (list_arg, &poslist)) < 0)
+    {
+      free (poslist);
+      return (EXECUTION_FAILURE);
+    }
+
+  if (array_name)
+    {      
+      v = find_or_make_array_variable (array_name, 1);
+      if (v == 0 || readonly_p (v) || noassign_p (v))
+	{
+	  if (v && readonly_p (v))
+	    err_readonly (array_name);
+	  return (EXECUTION_FAILURE);
+	}
+      else if (array_p (v) == 0)
+	{
+	  builtin_error ("%s: not an indexed array", array_name);
+	  return (EXECUTION_FAILURE);
+	}
+      if (invisible_p (v))
+	VUNSETATTR (v, att_invisible);
+      array_flush (array_cell (v));
+    }
+
+  op.flags = cutflags;
+  op.delim = delim;
+  op.npos = npos;
+  op.poslist = poslist;
+
+  /* we implement cut as a builtin with a cutfile() function that opens each
+     filename in LIST as a filename (or `-' for stdin) and runs cutline on
+     every line in the file. */
+  if (which == 0)
+    {
+      cutstring = list->word->word;
+      if (cutstring == 0 || *cutstring == 0)
+	{
+	  free (poslist);
+	  return (EXECUTION_SUCCESS);
+	}
+      rval = cutline (v, cutstring, &op);
+    }
+  else
+    rval = cutfile (v, list, &op);
+
+  return (rval);
+}
+
+int
+lcut_builtin (list)
+     WORD_LIST *list;
+{
+  return (cut_internal (0, list));
+}
+
+int
+cut_builtin (list)
+     WORD_LIST *list;
+{
+  return (cut_internal (1, list));
+}
+
+char *lcut_doc[] = {
+	"Extract selected fields from a string.",
+	"",
+        "Select portions of LINE (as specified by LIST) and assign them to",
+        "elements of the indexed array ARRAY starting at index 0, or write",
+        "them to the standard output if -a is not specified.",
+        "",
+	"Items specified by LIST are either column positions or fields delimited",
+	"by a special character, and are described more completely in cut(1).",
+	"",
+	"Columns correspond to bytes (-b), characters (-c), or fields (-f). The",
+	"field delimiter is specified by -d (default TAB). Column numbering",
+	"starts at 1.",
+	(char *)NULL
+};
+
+struct builtin lcut_struct = {
+	"lcut",			/* builtin name */
+	lcut_builtin,		/* function implementing the builtin */
+	BUILTIN_ENABLED,	/* initial flags for builtin */
+	lcut_doc,		/* array of long documentation strings. */
+	"lcut [-a ARRAY] [-b LIST] [-c LIST] [-f LIST] [-d CHAR] [-sn] line",	/* usage synopsis; becomes short_doc */
+	0			/* reserved for internal use */
+};
+
+char *cut_doc[] = {
+	"Extract selected fields from each line of a file.",
+	"",
+        "Select portions of each line (as specified by LIST) from each FILE",
+        "and write them to the standard output. cut reads from the standard",
+        "input if no FILE arguments are specified or if a FILE argument is a",
+        "single hyphen.",
+        "",
+	"Items specified by LIST are either column positions or fields delimited",
+	"by a special character, and are described more completely in cut(1).",
+	"",
+	"Columns correspond to bytes (-b), characters (-c), or fields (-f). The",
+	"field delimiter is specified by -d (default TAB). Column numbering",
+	"starts at 1.",
+	(char *)NULL
+};
+
+struct builtin cut_struct = {
+	"cut",			/* builtin name */
+	cut_builtin,		/* function implementing the builtin */
+	BUILTIN_ENABLED,	/* initial flags for builtin */
+	cut_doc,		/* array of long documentation strings. */
+	"cut [-a ARRAY] [-b LIST] [-c LIST] [-f LIST] [-d CHAR] [-sn] [file ...]",	/* usage synopsis; becomes short_doc */
+	0			/* reserved for internal use */
+};
diff --git a/examples/loadables/dirname.c b/examples/loadables/dirname.c
new file mode 100644
index 0000000..d802ca7
--- /dev/null
+++ b/examples/loadables/dirname.c
@@ -0,0 +1,119 @@
+/* dirname - return directory portion of pathname */
+
+/* See Makefile for compilation details. */
+
+/*
+   Copyright (C) 1999-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include "builtins.h"
+#include "shell.h"
+#include "common.h"
+#include "bashgetopt.h"
+
+int
+dirname_builtin (list)
+     WORD_LIST *list;
+{
+  int slen;
+  char *string;
+
+  if (no_options (list))
+    return (EX_USAGE);
+  list = loptend;
+
+  if (list == 0 || list->next)
+    {
+      builtin_usage ();
+      return (EX_USAGE);
+    }
+
+  string = list->word->word;
+  slen = strlen (string);
+
+  /* Strip trailing slashes */
+  while (slen > 0 && string[slen - 1] == '/')
+    slen--;
+
+  /* (2) If string consists entirely of slash characters, string shall be
+	 set to a single slash character.  In this case, skip steps (3)
+	 through (8). */
+  if (slen == 0)
+    {
+      fputs ("/\n", stdout);
+      return (EXECUTION_SUCCESS);
+    }
+
+  /* (3) If there are any trailing slash characters in string, they
+	 shall be removed. */
+  string[slen] = '\0';
+
+  /* (4) If there are no slash characters remaining in string, string
+	 shall be set to a single period character.  In this case, skip
+	 steps (5) through (8).
+
+     (5) If there are any trailing nonslash characters in string,
+	 they shall be removed. */
+
+  while (--slen >= 0)
+    if (string[slen] == '/')
+      break;
+
+  if (slen < 0)
+    {
+      fputs (".\n", stdout);
+      return (EXECUTION_SUCCESS);
+    }
+
+  /* (7) If there are any trailing slash characters in string, they
+	 shall be removed. */
+  while (--slen >= 0)
+    if (string[slen] != '/')
+      break;
+  string[++slen] = '\0';
+
+  /* (8) If the remaining string is empty, string shall be set to a single
+	 slash character. */
+  printf ("%s\n", (slen == 0) ? "/" : string);
+  return (EXECUTION_SUCCESS);
+}
+
+char *dirname_doc[] = {
+	"Display directory portion of pathname.",
+	"",
+	"The STRING is converted to the name of the directory containing",	
+	"the filename corresponding to the last pathname component in STRING.",
+	(char *)NULL
+};
+
+/* The standard structure describing a builtin command.  bash keeps an array
+   of these structures. */
+struct builtin dirname_struct = {
+	"dirname",		/* builtin name */
+	dirname_builtin,	/* function implementing the builtin */
+	BUILTIN_ENABLED,	/* initial flags for builtin */
+	dirname_doc,		/* array of long documentation strings. */
+	"dirname string",	/* usage synopsis */
+	0			/* reserved for internal use */
+};
diff --git a/examples/loadables/fdflags.c b/examples/loadables/fdflags.c
new file mode 100644
index 0000000..fbe5230
--- /dev/null
+++ b/examples/loadables/fdflags.c
@@ -0,0 +1,374 @@
+/* Loadable builtin to get and set file descriptor flags. */
+
+/* See Makefile for compilation details. */
+
+/*
+   Copyright (C) 2017,2018,2019 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+#include <fcntl.h>
+#include <errno.h>
+#include "bashansi.h"
+#include <stdio.h>
+
+#include "loadables.h"
+
+#ifndef FD_CLOEXEC
+#  define FD_CLOEXEC 1
+#endif
+
+static const struct
+{
+  const char *name;
+  int value;
+} file_flags[] =
+{
+#ifdef O_APPEND
+  { "append",	O_APPEND 	},
+#else
+#  define O_APPEND 0
+#endif
+#ifdef O_ASYNC
+  { "async",	O_ASYNC		},
+#else
+#  define O_ASYNC 0
+#endif
+#ifdef O_SYNC
+  { "sync",	O_SYNC		},
+#else
+#  define O_SYNC 0
+#endif
+#ifdef O_NONBLOCK
+  { "nonblock",	O_NONBLOCK	},
+#else
+#  define O_NONBLOCK 0
+#endif
+#ifdef O_FSYNC
+  { "fsync",	O_FSYNC		},
+#else
+#  define O_FSYNC 0
+#endif
+#ifdef O_DSYNC
+  { "dsync",	O_DSYNC		},
+#else
+#  define O_DSYNC 0
+#endif
+#ifdef O_RSYNC
+  { "rsync",	O_RSYNC		},
+#else
+#  define O_RSYNC 0
+#endif
+#ifdef O_ALT_IO
+  { "altio",	O_ALT_IO	},
+#else
+#  define O_ALT_IO 0
+#endif
+#ifdef O_DIRECT
+  { "direct",	O_DIRECT	},
+#else
+#  define O_DIRECT 0
+#endif
+#ifdef O_NOATIME
+  { "noatime",	O_NOATIME	},
+#else
+#  define O_NOATIME 0
+#endif
+#ifdef O_NOSIGPIPE
+  { "nosigpipe",	O_NOSIGPIPE	},
+#else
+#  define O_NOSIGPIPE 0
+#endif
+
+#ifndef O_CLOEXEC
+#  define ALLFLAGS (O_APPEND|O_ASYNC|O_SYNC|O_NONBLOCK|O_FSYNC|O_DSYNC|\
+	O_RSYNC|O_ALT_IO|O_DIRECT|O_NOATIME|O_NOSIGPIPE)
+
+/* An unsed bit in the file status flags word we can use to pass around the
+   state of close-on-exec. */
+# define O_CLOEXEC      ((~ALLFLAGS) ^ ((~ALLFLAGS) & ((~ALLFLAGS) - 1)))
+#endif
+
+#ifdef O_CLOEXEC
+  { "cloexec",	O_CLOEXEC	},
+#endif
+};
+
+#define N_FLAGS		(sizeof (file_flags) / sizeof (file_flags[0]))
+
+#ifndef errno
+extern int errno;
+#endif
+
+/* FIX THIS */
+static int
+getallflags ()
+{
+  int i, allflags;
+  
+  for (i = allflags = 0; i < N_FLAGS; i++)
+    allflags |= file_flags[i].value;
+  return allflags;
+}
+
+static int
+getflags(int fd, int p)
+{
+  int c, f;
+  int allflags;
+
+  if ((c = fcntl(fd, F_GETFD)) == -1)
+    {
+      if (p)
+	builtin_error("can't get status for fd %d: %s", fd, strerror(errno));
+      return -1;
+    }
+    
+  if ((f = fcntl(fd, F_GETFL)) == -1)
+    {
+      if (p)
+	builtin_error("Can't get flags for fd %d: %s", fd, strerror(errno));
+      return -1;
+    }
+
+  if (c)
+    f |= O_CLOEXEC;
+
+  return f & getallflags();
+}
+
+static void
+printone(int fd, int p, int verbose)
+{
+  int f;
+  size_t i;
+
+  if ((f = getflags(fd, p)) == -1)
+    return;
+
+  printf ("%d:", fd);
+
+  for (i = 0; i < N_FLAGS; i++)
+    {
+      if (f & file_flags[i].value)
+	{
+	  printf ("%s%s", verbose ? "+" : "", file_flags[i].name);
+	  f &= ~file_flags[i].value;
+	}
+      else if (verbose)
+	printf ( "-%s", file_flags[i].name);
+      else
+	continue;
+
+      if (f || (verbose && i != N_FLAGS - 1))
+	putchar (',');
+    }
+  printf ("\n");
+}
+
+static int
+parseflags(char *s, int *p, int *n)
+{
+  int f, *v;
+  size_t i;
+
+  f = 0;
+  *p = *n = 0;
+
+  for (s = strtok(s, ","); s; s = strtok(NULL, ","))
+    {
+      switch (*s)
+        {
+	case '+':
+	  v = p;
+	  s++;
+	  break;
+	case '-':
+	  v = n;
+	  s++;
+	  break;
+	default:
+	  v = &f;
+	  break;
+	}
+			
+      for (i = 0; i < N_FLAGS; i++)
+	if (strcmp(s, file_flags[i].name) == 0)
+	  {
+	    *v |= file_flags[i].value;
+	    break;
+	  }
+      if (i == N_FLAGS)
+	builtin_error("invalid flag `%s'", s);
+    }
+
+  return f;
+}
+
+static void
+setone(int fd, char *v, int verbose)
+{
+  int f, n, pos, neg, cloexec;
+
+  f = getflags(fd, 1);
+  if (f == -1)
+    return;
+
+  parseflags(v, &pos, &neg);
+
+  cloexec = -1;
+
+  if ((pos & O_CLOEXEC) && (f & O_CLOEXEC) == 0)
+    cloexec = FD_CLOEXEC;
+  if ((neg & O_CLOEXEC) && (f & O_CLOEXEC))
+    cloexec = 0;
+
+  if (cloexec != -1 && fcntl(fd, F_SETFD, cloexec) == -1)
+    builtin_error("can't set status for fd %d: %s", fd, strerror(errno));
+
+  pos &= ~O_CLOEXEC;
+  neg &= ~O_CLOEXEC;
+  f &= ~O_CLOEXEC;
+
+  n = f;
+  n |= pos;
+  n &= ~neg;
+
+  if (n != f && fcntl(fd, F_SETFL, n) == -1)
+    builtin_error("can't set flags for fd %d: %s", fd, strerror(errno));
+}
+
+static int
+getmaxfd ()
+{
+  int maxfd, ignore;
+
+#ifdef F_MAXFD
+  maxfd = fcntl (0, F_MAXFD);
+  if (maxfd > 0)
+    return maxfd;
+#endif
+
+  maxfd = getdtablesize ();
+  if (maxfd <= 0)
+    maxfd = HIGH_FD_MAX;
+  for (maxfd--; maxfd > 0; maxfd--)
+    if (fcntl (maxfd, F_GETFD, &ignore) != -1)
+      break;
+
+  return maxfd;
+}
+
+int
+fdflags_builtin (WORD_LIST *list)
+{
+  int opt, maxfd, i, num, verbose, setflag;
+  char *setspec;
+  WORD_LIST *l;
+  intmax_t inum;
+
+  setflag = verbose = 0;
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "s:v")) != -1)
+    {
+      switch (opt)
+	{
+	case 's':
+	  setflag = 1;
+	  setspec = list_optarg;
+	  break;
+	case 'v':
+	  verbose = 1;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+	
+    }
+  list = loptend;
+
+  /* Maybe we could provide some default here, but we don't yet. */
+  if (list == 0 && setflag)
+    return (EXECUTION_SUCCESS);
+
+  if (list == 0)
+    {
+      maxfd = getmaxfd ();
+      if (maxfd < 0)
+	{
+	  builtin_error ("can't get max fd: %s", strerror (errno));
+	  return (EXECUTION_FAILURE);
+	}
+      for (i = 0; i < maxfd; i++)
+	printone (i, 0, verbose);
+      return (EXECUTION_SUCCESS);
+    }
+
+  opt = EXECUTION_SUCCESS;
+  for (l = list; l; l = l->next)
+    {
+      if (legal_number (l->word->word, &inum) == 0 || inum < 0)
+	{
+	  builtin_error ("%s: invalid file descriptor", l->word->word);
+	  opt = EXECUTION_FAILURE;
+	  continue;
+	}
+      num = inum;		/* truncate to int */
+      if (setflag)
+	setone (num, setspec, verbose);
+      else
+	printone (num, 1, verbose);
+    }
+
+  return (opt);
+}
+
+char *fdflags_doc[] =
+{
+  "Display and modify file descriptor flags.",
+  "",
+  "Display or, if the -s option is supplied, set flags for each file",
+  "descriptor supplied as an argument.  If the -v option is supplied,",
+  "the display is verbose, including each settable option name in the",
+  "form of a string such as that accepted by the -s option.",
+  "",
+  "The -s option accepts a string with a list of flag names, each preceded",
+  "by a `+' (set) or `-' (unset).  Those changes are applied to each file",
+  "descriptor supplied as an argument.",
+  "",
+  "If no file descriptor arguments are supplied, the displayed information",
+  "consists of the status of flags for each of the shell's open files.",
+  (char *)NULL
+};
+
+/* The standard structure describing a builtin command.  bash keeps an array
+   of these structures.  The flags must include BUILTIN_ENABLED so the
+   builtin can be used. */
+struct builtin fdflags_struct = {
+	"fdflags",		/* builtin name */
+	fdflags_builtin,		/* function implementing the builtin */
+	BUILTIN_ENABLED,	/* initial flags for builtin */
+	fdflags_doc,		/* array of long documentation strings. */
+	"fdflags [-v] [-s flags_string] [fd ...]",	/* usage synopsis; becomes short_doc */
+	0			/* reserved for internal use */
+};
diff --git a/examples/loadables/finfo.c b/examples/loadables/finfo.c
new file mode 100644
index 0000000..8c278c3
--- /dev/null
+++ b/examples/loadables/finfo.c
@@ -0,0 +1,629 @@
+/*
+ * finfo - print file info
+ *
+ * Chet Ramey
+ * chet@po.cwru.edu
+ */
+
+/*
+   Copyright (C) 1999-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef HAVE_CONFIG_H
+#  include <config.h>
+#endif
+
+#include <sys/types.h>
+#ifdef MAJOR_IN_MKDEV
+#  include <sys/mkdev.h>
+#endif
+#ifdef MAJOR_IN_SYSMACROS
+#  include <sys/sysmacros.h>
+#endif
+#include "posixstat.h"
+#include <stdio.h>
+#include <pwd.h>
+#include <grp.h>
+#include <errno.h>
+#include "posixtime.h"
+
+#include "bashansi.h"
+#include "shell.h"
+#include "builtins.h"
+#include "common.h"
+#include "getopt.h"
+
+#ifndef errno
+extern int	errno;
+#endif
+
+extern char	**make_builtin_argv ();
+
+static void	perms();
+static int	printst();
+static int	printsome();
+static void	printmode();
+static int	printfinfo();
+static int	finfo_main();
+
+extern int	sh_optind;
+extern char	*sh_optarg;
+extern char	*this_command_name;
+
+static char	*prog;
+static int	pmask;
+
+#define OPT_UID		0x00001
+#define OPT_GID		0x00002
+#define OPT_DEV		0x00004
+#define OPT_INO		0x00008
+#define OPT_PERM	0x00010
+#define OPT_LNKNAM	0x00020
+#define OPT_FID		0x00040
+#define OPT_NLINK	0x00080
+#define OPT_RDEV	0x00100
+#define OPT_SIZE	0x00200
+#define OPT_ATIME	0x00400
+#define OPT_MTIME	0x00800
+#define OPT_CTIME	0x01000
+#define OPT_BLKSIZE	0x02000
+#define OPT_BLKS	0x04000
+#define OPT_FTYPE	0x08000
+#define OPT_PMASK	0x10000
+#define OPT_OPERM	0x20000
+
+#define OPT_ASCII	0x1000000
+
+#define OPTIONS		"acdgiflmnopsuACGMP:U"
+
+static int
+octal(s)
+char	*s;
+{
+	int	r;
+
+	r = *s - '0';
+	while (*++s >= '0' && *s <= '7')
+		r = (r * 8) + (*s - '0');
+	return r;
+}
+
+static int
+finfo_main(argc, argv)
+int	argc;
+char	**argv;
+{
+	register int	i;
+	int	mode, flags, opt;
+
+	sh_optind = 0;	/* XXX */
+	prog = base_pathname(argv[0]);
+	if (argc == 1) {
+		builtin_usage();
+		return(1);
+	}
+	flags = 0;
+	while ((opt = sh_getopt(argc, argv, OPTIONS)) != EOF) {
+		switch(opt) {
+		case 'a': flags |= OPT_ATIME; break;
+		case 'A': flags |= OPT_ATIME|OPT_ASCII; break;
+		case 'c': flags |= OPT_CTIME; break;
+		case 'C': flags |= OPT_CTIME|OPT_ASCII; break;
+		case 'd': flags |= OPT_DEV; break;
+		case 'i': flags |= OPT_INO; break;
+		case 'f': flags |= OPT_FID; break;
+		case 'g': flags |= OPT_GID; break;
+		case 'G': flags |= OPT_GID|OPT_ASCII; break;
+		case 'l': flags |= OPT_LNKNAM; break;
+		case 'm': flags |= OPT_MTIME; break;
+		case 'M': flags |= OPT_MTIME|OPT_ASCII; break;
+		case 'n': flags |= OPT_NLINK; break;
+		case 'o': flags |= OPT_OPERM; break;
+		case 'p': flags |= OPT_PERM; break;
+		case 'P': flags |= OPT_PMASK; pmask = octal(sh_optarg); break;
+		case 's': flags |= OPT_SIZE; break;
+		case 'u': flags |= OPT_UID; break;
+		case 'U': flags |= OPT_UID|OPT_ASCII; break;
+		default: builtin_usage (); return(1);
+		}
+	}
+
+	argc -= sh_optind;
+	argv += sh_optind;
+
+	if (argc == 0) {
+		builtin_usage();
+		return(1);
+	}
+
+	for (i = 0; i < argc; i++)
+		opt = flags ? printsome (argv[i], flags) : printfinfo(argv[i]);
+
+	return(opt);
+}
+
+static struct stat *
+getstat(f)
+char	*f;
+{
+	static struct stat st;
+	int	fd, r;
+	intmax_t lfd;
+
+	if (strncmp(f, "/dev/fd/", 8) == 0) {
+		if ((legal_number(f + 8, &lfd) == 0) || (int)lfd != lfd) {
+			builtin_error("%s: invalid fd", f + 8);
+			return ((struct stat *)0);
+		}
+		fd = lfd;
+		r = fstat(fd, &st);
+	} else
+#ifdef HAVE_LSTAT
+		r = lstat(f, &st);
+#else
+		r = stat(f, &st);
+#endif
+	if (r < 0) {
+		builtin_error("%s: cannot stat: %s", f, strerror(errno));
+		return ((struct stat *)0);
+	}
+	return (&st);
+}
+
+static int
+printfinfo(f)
+char	*f;
+{
+	struct stat *st;
+
+	st = getstat(f);
+	return (st ? printst(st) : 1);
+}
+
+static int
+getperm(m)
+int	m;
+{
+	return (m & (S_IRWXU|S_IRWXG|S_IRWXO|S_ISUID|S_ISGID));
+}
+
+static void
+perms(m)
+int	m;
+{
+	char ubits[4], gbits[4], obits[4];	/* u=rwx,g=rwx,o=rwx */
+	int i;
+
+	i = 0;
+	if (m & S_IRUSR)
+		ubits[i++] = 'r';
+	if (m & S_IWUSR)
+		ubits[i++] = 'w';
+	if (m & S_IXUSR)
+		ubits[i++] = 'x';
+	ubits[i] = '\0';
+
+	i = 0;
+	if (m & S_IRGRP)
+		gbits[i++] = 'r';
+	if (m & S_IWGRP)
+		gbits[i++] = 'w';
+	if (m & S_IXGRP)
+		gbits[i++] = 'x';
+	gbits[i] = '\0';
+
+	i = 0;
+	if (m & S_IROTH)
+		obits[i++] = 'r';
+	if (m & S_IWOTH)
+		obits[i++] = 'w';
+	if (m & S_IXOTH)
+		obits[i++] = 'x';
+	obits[i] = '\0';
+
+	if (m & S_ISUID)
+		ubits[2] = (m & S_IXUSR) ? 's' : 'S';
+	if (m & S_ISGID)
+		gbits[2] = (m & S_IXGRP) ? 's' : 'S';
+	if (m & S_ISVTX)
+		obits[2] = (m & S_IXOTH) ? 't' : 'T';
+
+	printf ("u=%s,g=%s,o=%s", ubits, gbits, obits);
+}
+
+static void
+printmode(mode)
+int	mode;
+{
+	if (S_ISBLK(mode))
+		printf("S_IFBLK ");
+	if (S_ISCHR(mode))
+		printf("S_IFCHR ");
+	if (S_ISDIR(mode))
+		printf("S_IFDIR ");
+	if (S_ISREG(mode))
+		printf("S_IFREG ");
+	if (S_ISFIFO(mode))
+		printf("S_IFIFO ");
+	if (S_ISLNK(mode))
+		printf("S_IFLNK ");
+	if (S_ISSOCK(mode))
+		printf("S_IFSOCK ");
+#ifdef S_ISWHT
+	if (S_ISWHT(mode))
+		printf("S_ISWHT ");
+#endif
+	perms(getperm(mode));
+	printf("\n");
+}
+
+static int
+printst(st)
+struct stat *st;
+{
+	struct passwd	*pw;
+	struct group	*gr;
+	char	*owner;
+	int	ma, mi, d;
+
+	ma = major (st->st_rdev);
+	mi = minor (st->st_rdev);
+#if defined (makedev)
+	d = makedev (ma, mi);
+#else
+	d = st->st_rdev & 0xFF;
+#endif
+	printf("Device (major/minor): %d (%d/%d)\n", d, ma, mi);
+
+	printf("Inode: %d\n", (int) st->st_ino);
+	printf("Mode: (%o) ", (int) st->st_mode);
+	printmode((int) st->st_mode);
+	printf("Link count: %d\n", (int) st->st_nlink);
+	pw = getpwuid(st->st_uid);
+	owner = pw ? pw->pw_name : "unknown";
+	printf("Uid of owner: %d (%s)\n", (int) st->st_uid, owner);
+	gr = getgrgid(st->st_gid);
+	owner = gr ? gr->gr_name : "unknown";
+	printf("Gid of owner: %d (%s)\n", (int) st->st_gid, owner);
+	printf("Device type: %d\n", (int) st->st_rdev);
+	printf("File size: %ld\n", (long) st->st_size);
+	printf("File last access time: %s", ctime (&st->st_atime));
+	printf("File last modify time: %s", ctime (&st->st_mtime));
+	printf("File last status change time: %s", ctime (&st->st_ctime));
+	fflush(stdout);
+	return(0);
+}
+
+static int
+printsome(f, flags)
+char	*f;
+int	flags;
+{
+	struct stat *st;
+	struct passwd *pw;
+	struct group *gr;
+	int	p;
+	char	*b;
+
+	st = getstat(f);
+	if (st == NULL)
+		return (1);
+
+	/* Print requested info */
+	if (flags & OPT_ATIME) {
+		if (flags & OPT_ASCII)
+			printf("%s", ctime(&st->st_atime));
+		else
+			printf("%ld\n", st->st_atime);
+	} else if (flags & OPT_MTIME) {
+		if (flags & OPT_ASCII)
+			printf("%s", ctime(&st->st_mtime));
+		else
+			printf("%ld\n", st->st_mtime);
+	} else if (flags & OPT_CTIME) {
+		if (flags & OPT_ASCII)
+			printf("%s", ctime(&st->st_ctime));
+		else
+			printf("%ld\n", st->st_ctime);
+	} else if (flags & OPT_DEV)
+		printf("%lu\n", (unsigned long)st->st_dev);
+	else if (flags & OPT_INO)
+		printf("%lu\n", (unsigned long)st->st_ino);
+	else if (flags & OPT_FID)
+		printf("%lu:%lu\n", (unsigned long)st->st_dev, (unsigned long)st->st_ino);
+	else if (flags & OPT_NLINK)
+		printf("%lu\n", (unsigned long)st->st_nlink);
+	else if (flags & OPT_LNKNAM) {
+#ifdef S_ISLNK
+		b = xmalloc(4096);
+		p = readlink(f, b, 4096);
+		if (p >= 0 && p < 4096)
+			b[p] = '\0';
+		else {
+			p = errno;
+			strcpy(b, prog);
+			strcat(b, ": ");
+			strcat(b, strerror(p));
+		}
+		printf("%s\n", b);
+		free(b);
+#else
+		printf("%s\n", f);
+#endif
+	} else if (flags & OPT_PERM) {
+		perms(st->st_mode);
+		printf("\n");
+	} else if (flags & OPT_OPERM)
+		printf("%o\n", getperm(st->st_mode));
+	else if (flags & OPT_PMASK)
+		printf("%o\n", getperm(st->st_mode) & pmask);
+	else if (flags & OPT_UID) {
+		pw = getpwuid(st->st_uid);
+		if (flags & OPT_ASCII)
+			printf("%s\n", pw ? pw->pw_name : "unknown");
+		else
+			printf("%d\n", st->st_uid);
+	} else if (flags & OPT_GID) {
+		gr = getgrgid(st->st_gid);
+		if (flags & OPT_ASCII)
+			printf("%s\n", gr ? gr->gr_name : "unknown");
+		else
+			printf("%d\n", st->st_gid);
+	} else if (flags & OPT_SIZE)
+		printf("%ld\n", (long) st->st_size);
+
+	return (0);
+}
+
+#ifndef NOBUILTIN
+int
+finfo_builtin(list)
+     WORD_LIST *list;
+{
+  int c, r;
+  char **v;
+  WORD_LIST *l;
+
+  v = make_builtin_argv (list, &c);
+  r = finfo_main (c, v);
+  free (v);
+
+  return r;
+}
+
+static char *finfo_doc[] = {
+  "Display information about file attributes.",
+  "",
+  "Display information about each FILE.  Only single operators should",
+  "be supplied.  If no options are supplied, a summary of the info",
+  "available about each FILE is printed.  If FILE is of the form",
+  "/dev/fd/XX, file descriptor XX is described.  Operators, if supplied,",
+  "have the following meanings:",
+  "",
+  "	-a	last file access time",
+  "	-A	last file access time in ctime format",
+  "	-c	last file status change time",
+  "	-C	last file status change time in ctime format",
+  "	-m	last file modification time",
+  "	-M	last file modification time in ctime format",
+  "	-d	device",
+  "	-i	inode",
+  "	-f	composite file identifier (device:inode)",
+  "	-g	gid of owner",
+  "	-G	group name of owner",
+  "	-l	name of file pointed to by symlink",
+  "	-n	link count",
+  "	-o	permissions in octal",
+  "	-p	permissions in ascii",
+  "	-P mask permissions ANDed with MASK (like with umask)",
+  "	-s	file size in bytes",
+  "	-u	uid of owner",
+  "	-U	user name of owner",
+  (char *)0
+};
+
+struct builtin finfo_struct = {
+	"finfo",
+	finfo_builtin,
+	BUILTIN_ENABLED,
+	finfo_doc,
+	"finfo [-acdgiflmnopsuACGMPU] file [file...]",
+	0
+};
+#endif
+
+#ifdef NOBUILTIN
+#if defined (PREFER_STDARG)
+#  include <stdarg.h>
+#else
+#  if defined (PREFER_VARARGS)
+#    include <varargs.h>
+#  endif
+#endif
+
+char *this_command_name;
+
+main(argc, argv)
+int	argc;
+char	**argv;
+{
+	this_command_name = argv[0];
+	exit(finfo_main(argc, argv));
+}
+
+void
+builtin_usage()
+{
+	fprintf(stderr, "%s: usage: %s [-%s] [file ...]\n", prog, prog, OPTIONS);
+}
+
+#ifndef HAVE_STRERROR
+char *
+strerror(e)
+int	e;
+{
+	static char	ebuf[40];
+	extern int	sys_nerr;
+	extern char	*sys_errlist[];
+
+	if (e < 0 || e > sys_nerr) {
+		sprintf(ebuf,"Unknown error code %d", e);
+		return (&ebuf[0]);
+	}
+	return (sys_errlist[e]);
+}
+#endif
+
+char *
+xmalloc(s)
+size_t	s;
+{
+	char	*ret;
+	extern char *malloc();
+
+	ret = malloc(s);
+	if (ret)
+		return (ret);
+	fprintf(stderr, "%s: cannot malloc %d bytes\n", prog, s);
+	exit(1);
+}
+
+char *
+base_pathname(p)
+char	*p;
+{
+	char	*t;
+
+	if (t = strrchr(p, '/'))
+		return(++t);
+	return(p);
+}
+
+int
+legal_number (string, result)
+     char *string;
+     long *result;
+{
+  int sign;
+  long value;
+
+  sign = 1;
+  value = 0;
+
+  if (result)
+    *result = 0;
+
+  /* Skip leading whitespace characters. */
+  while (whitespace (*string))
+    string++;
+
+  if (!*string)
+    return (0);
+
+  /* We allow leading `-' or `+'. */
+  if (*string == '-' || *string == '+')
+    {
+      if (!digit (string[1]))
+        return (0);
+
+      if (*string == '-')
+        sign = -1;
+
+      string++;
+    }
+
+  while (digit (*string))
+    {
+      if (result)
+        value = (value * 10) + digit_value (*string);
+      string++;
+    }
+
+  /* Skip trailing whitespace, if any. */
+  while (whitespace (*string))
+    string++;
+
+  /* Error if not at end of string. */
+  if (*string)
+    return (0);
+
+  if (result)
+    *result = value * sign;
+
+  return (1);
+}
+
+int sh_optind;
+char *sh_optarg;
+int sh_opterr;
+
+extern int optind;
+extern char *optarg;
+
+int
+sh_getopt(c, v, o)
+int	c;
+char	**v, *o;
+{
+	int	r;
+
+	r = getopt(c, v, o);
+	sh_optind = optind;
+	sh_optarg = optarg;
+	return r;
+}
+
+#if defined (USE_VARARGS)
+void
+#if defined (PREFER_STDARG)
+builtin_error (const char *format, ...)
+#else
+builtin_error (format, va_alist)
+     const char *format;
+     va_dcl
+#endif
+{
+  va_list args;
+
+  if (this_command_name && *this_command_name)
+    fprintf (stderr, "%s: ", this_command_name);
+
+#if defined (PREFER_STDARG)
+  va_start (args, format);
+#else
+  va_start (args);
+#endif
+
+  vfprintf (stderr, format, args);
+  va_end (args);
+  fprintf (stderr, "\n");
+}
+#else
+void
+builtin_error (format, arg1, arg2, arg3, arg4, arg5)
+     char *format, *arg1, *arg2, *arg3, *arg4, *arg5;
+{
+  if (this_command_name && *this_command_name)
+    fprintf (stderr, "%s: ", this_command_name);
+
+  fprintf (stderr, format, arg1, arg2, arg3, arg4, arg5);
+  fprintf (stderr, "\n");
+  fflush (stderr);
+}
+#endif /* !USE_VARARGS */
+
+#endif
diff --git a/examples/loadables/head.c b/examples/loadables/head.c
new file mode 100644
index 0000000..1edca6c
--- /dev/null
+++ b/examples/loadables/head.c
@@ -0,0 +1,167 @@
+/* head - copy first part of files. */
+
+/* See Makefile for compilation details. */
+
+/*
+   Copyright (C) 1999-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include "bashtypes.h"
+#include "posixstat.h"
+#include "filecntl.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "bashansi.h"
+
+#include <stdio.h>
+#include <errno.h>
+#include "chartypes.h"
+
+#include "builtins.h"
+#include "shell.h"
+#include "bashgetopt.h"
+#include "common.h"
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+static void
+munge_list (list)
+     WORD_LIST *list;
+{
+  WORD_LIST *l, *nl;
+  WORD_DESC *wd;
+  char *arg;
+
+  for (l = list; l; l = l->next)
+    {
+      arg = l->word->word;
+      if (arg[0] != '-' || arg[1] == '-' || (DIGIT(arg[1]) == 0))
+        return;
+      /* We have -[0-9]* */
+      wd = make_bare_word (arg+1);
+      nl = make_word_list (wd, l->next);
+      l->word->word[1] = 'n';
+      l->word->word[2] = '\0';
+      l->next = nl;
+      l = nl;	/* skip over new argument */
+    }
+}
+
+static int
+file_head (fp, cnt)
+     FILE *fp;
+     int cnt;
+{
+  int ch;
+
+  while (cnt--)
+    {
+      while ((ch = getc (fp)) != EOF)
+	{
+	  if (putchar (ch) == EOF)
+	    {
+	      builtin_error ("write error: %s", strerror (errno));
+	      return EXECUTION_FAILURE;
+	    }
+	  if (ch == '\n')
+	    break;
+	}
+    }
+  return (EXECUTION_SUCCESS);
+}
+
+int
+head_builtin (list)
+     WORD_LIST *list;
+{
+  int nline, opt, rval;
+  WORD_LIST *l;
+  FILE *fp;
+
+  char *t;
+
+  munge_list (list);	/* change -num into -n num */
+
+  reset_internal_getopt ();
+  nline = 10;
+  while ((opt = internal_getopt (list, "n:")) != -1)
+    {
+      switch (opt)
+	{
+	case 'n':
+	  nline = atoi (list_optarg);
+	  if (nline <= 0)
+	    {
+	      builtin_error ("bad line count: %s", list_optarg);
+	      return (EX_USAGE);
+	    }
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+  if (list == 0)
+    return (file_head (stdin, nline));
+
+  for (rval = EXECUTION_SUCCESS, opt = 1, l = list; l; l = l->next)
+    {
+      fp = fopen (l->word->word, "r");
+      if (fp == NULL)
+	{
+	  builtin_error ("%s: %s", l->word->word, strerror (errno));
+	  continue;
+	}
+      if (list->next)	/* more than one file */
+	{
+	  printf ("%s==> %s <==\n", opt ? "" : "\n", l->word->word);
+	  opt = 0;
+	}
+      rval = file_head (fp, nline);
+      fclose (fp);
+    }
+   
+  return (rval);
+}
+
+char *head_doc[] = {
+	"Display lines from beginning of file.",
+	"",
+	"Copy the first N lines from the input files to the standard output.",
+	"N is supplied as an argument to the `-n' option.  If N is not given,",
+	"the first ten lines are copied.",
+	(char *)NULL
+};
+
+struct builtin head_struct = {
+	"head",			/* builtin name */
+	head_builtin,		/* function implementing the builtin */
+	BUILTIN_ENABLED,	/* initial flags for builtin */
+	head_doc,		/* array of long documentation strings. */
+	"head [-n num] [file ...]", /* usage synopsis; becomes short_doc */
+	0			/* reserved for internal use */
+};
diff --git a/examples/loadables/hello.c b/examples/loadables/hello.c
new file mode 100644
index 0000000..b09362b
--- /dev/null
+++ b/examples/loadables/hello.c
@@ -0,0 +1,96 @@
+/* Sample builtin to be dynamically loaded with enable -f and create a new
+   builtin. */
+
+/* See Makefile for compilation details. */
+
+/*
+   Copyright (C) 1999-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+
+#include "loadables.h"
+
+/* A builtin `xxx' is normally implemented with an `xxx_builtin' function.
+   If you're converting a command that uses the normal Unix argc/argv
+   calling convention, use argv = make_builtin_argv (list, &argc) and call
+   the original `main' something like `xxx_main'.  Look at cat.c for an
+   example.
+
+   Builtins should use internal_getopt to parse options.  It is the same as
+   getopt(3), but it takes a WORD_LIST *.  Look at print.c for an example
+   of its use.
+
+   If the builtin takes no options, call no_options(list) before doing
+   anything else.  If it returns a non-zero value, your builtin should
+   immediately return EX_USAGE.  Look at logname.c for an example.
+
+   A builtin command returns EXECUTION_SUCCESS for success and
+   EXECUTION_FAILURE to indicate failure. */
+int
+hello_builtin (list)
+     WORD_LIST *list;
+{
+  printf("hello world\n");
+  fflush (stdout);
+  return (EXECUTION_SUCCESS);
+}
+
+int
+hello_builtin_load (s)
+     char *s;
+{
+  printf ("hello builtin loaded\n");
+  fflush (stdout);
+  return (1);
+}
+
+void
+hello_builtin_unload (s)
+     char *s;
+{
+  printf ("hello builtin unloaded\n");
+  fflush (stdout);
+}
+
+/* An array of strings forming the `long' documentation for a builtin xxx,
+   which is printed by `help xxx'.  It must end with a NULL.  By convention,
+   the first line is a short description. */
+char *hello_doc[] = {
+	"Sample builtin.",
+	"",
+	"this is the long doc for the sample hello builtin",
+	(char *)NULL
+};
+
+/* The standard structure describing a builtin command.  bash keeps an array
+   of these structures.  The flags must include BUILTIN_ENABLED so the
+   builtin can be used. */
+struct builtin hello_struct = {
+	"hello",		/* builtin name */
+	hello_builtin,		/* function implementing the builtin */
+	BUILTIN_ENABLED,	/* initial flags for builtin */
+	hello_doc,		/* array of long documentation strings. */
+	"hello",		/* usage synopsis; becomes short_doc */
+	0			/* reserved for internal use */
+};
diff --git a/examples/loadables/id.c b/examples/loadables/id.c
new file mode 100644
index 0000000..f857b54
--- /dev/null
+++ b/examples/loadables/id.c
@@ -0,0 +1,329 @@
+/*
+ * id - POSIX.2 user identity
+ *
+ * (INCOMPLETE -- supplementary groups for other users not yet done)
+ *
+ * usage: id [-Ggu] [-nr] [user]
+ *
+ * The default output format looks something like:
+ *	uid=xxx(chet) gid=xx groups=aa(aname), bb(bname), cc(cname)
+ */
+
+/*
+   Copyright (C) 1999-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+#include <stdio.h>
+#include "bashtypes.h"
+#include <pwd.h>
+#include <grp.h>
+#include "bashansi.h"
+
+#ifdef HAVE_LIMITS_H
+#  include <limits.h>
+#else
+#  include <sys/param.h>
+#endif
+
+#if !defined (HAVE_GETPW_DECLS)
+extern struct passwd *getpwuid ();
+#endif
+extern struct group *getgrgid ();
+
+#include "shell.h"
+#include "builtins.h"
+#include "stdc.h"
+#include "common.h"
+#include "bashgetopt.h"
+
+#define ID_ALLGROUPS	0x001		/* -G */
+#define ID_GIDONLY	0x002		/* -g */
+#define ID_USENAME	0x004		/* -n */
+#define ID_USEREAL	0x008		/* -r */
+#define ID_USERONLY	0x010		/* -u */
+
+#define ID_FLAGSET(s)	((id_flags & (s)) != 0)
+
+static int id_flags;
+
+static uid_t ruid, euid;
+static gid_t rgid, egid;
+
+static char *id_user;
+
+static int inituser ();
+
+static int id_pruser ();
+static int id_prgrp ();
+static int id_prgroups ();
+static int id_prall ();
+
+int
+id_builtin (list)
+     WORD_LIST *list;
+{
+  int opt;
+  char *user;
+
+  id_flags = 0;
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "Ggnru")) != -1)
+    {
+      switch (opt)
+	{
+	case 'G': id_flags |= ID_ALLGROUPS; break;
+	case 'g': id_flags |= ID_GIDONLY; break;
+	case 'n': id_flags |= ID_USENAME; break;
+	case 'r': id_flags |= ID_USEREAL; break;
+	case 'u': id_flags |= ID_USERONLY; break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+  user = list ? list->word->word : (char *)NULL;
+
+  /* Check for some invalid option combinations */
+  opt = ID_FLAGSET (ID_ALLGROUPS) + ID_FLAGSET (ID_GIDONLY) + ID_FLAGSET (ID_USERONLY);
+  if (opt > 1 || (opt == 0 && ((id_flags & (ID_USEREAL|ID_USENAME)) != 0)))
+    {
+      builtin_usage ();
+      return (EX_USAGE);
+    }
+
+  if (list && list->next)
+    {
+      builtin_usage ();
+      return (EX_USAGE);
+    }
+
+  if (inituser (user) < 0)
+    return (EXECUTION_FAILURE);
+
+  opt = 0;
+  if (id_flags & ID_USERONLY)
+    opt += id_pruser ((id_flags & ID_USEREAL) ? ruid : euid);
+  else if (id_flags & ID_GIDONLY)
+    opt += id_prgrp ((id_flags & ID_USEREAL) ? rgid : egid);
+  else if (id_flags & ID_ALLGROUPS)
+    opt += id_prgroups (user);
+  else
+    opt += id_prall (user);
+  putchar ('\n');
+  fflush (stdout);
+
+  return (opt == 0 ? EXECUTION_SUCCESS : EXECUTION_FAILURE);
+}
+
+static int
+inituser (uname)
+     char *uname;
+{
+  struct passwd *pwd;
+
+  if (uname)
+    {
+      pwd = getpwnam (uname);
+      if (pwd == 0)
+	{
+	  builtin_error ("%s: no such user", uname);
+	  return -1;
+	}
+      ruid = euid = pwd->pw_uid;
+      rgid = egid = pwd->pw_gid;
+    }
+  else
+    {
+      ruid = current_user.uid;
+      euid = current_user.euid;
+      rgid = current_user.gid;
+      egid = current_user.egid;
+    }
+  return 0;
+}
+
+/* Print the name or value of user ID UID. */
+static int
+id_pruser (uid)
+     int uid;
+{
+  struct passwd *pwd = NULL;
+  int r;
+
+  r = 0;
+  if (id_flags & ID_USENAME)
+    {
+      pwd = getpwuid (uid);
+      if (pwd == NULL)
+        r = 1;
+    }
+  if (pwd)
+    printf ("%s", pwd->pw_name);
+  else
+    printf ("%u", (unsigned) uid);
+      
+  return r;
+}
+
+/* Print the name or value of group ID GID. */
+
+static int
+id_prgrp (gid)
+     int gid;
+{
+  struct group *grp = NULL;
+  int r;
+
+  r = 0;
+  if (id_flags & ID_USENAME)
+    {
+      grp = getgrgid (gid);
+      if (grp == NULL)
+	r = 1;
+    }
+
+  if (grp)
+    printf ("%s", grp->gr_name);
+  else
+    printf ("%u", (unsigned) gid);
+
+  return r;
+}
+
+static int
+id_prgroups (uname)
+     char *uname;
+{
+  int *glist, ng, i, r;
+
+  r = 0;
+  id_prgrp (rgid);
+  if (egid != rgid)
+    {
+      putchar (' ');
+      id_prgrp (egid);
+    }
+
+  if (uname)
+    {
+      builtin_error ("supplementary groups for other users not yet implemented");
+      glist = (int *)NULL;
+      ng = 0;
+      r = 1;
+    }
+  else
+    glist = get_group_array (&ng);
+
+  for (i = 0; i < ng; i++)
+    if (glist[i] != rgid && glist[i] != egid)
+      {
+	putchar (' ');
+	id_prgrp (glist[i]);
+      }
+  
+  return r;
+}
+
+static int
+id_prall (uname)
+     char *uname;
+{
+  int r, i, ng, *glist;
+  struct passwd *pwd;
+  struct group *grp;
+
+  r = 0;
+  printf ("uid=%u", (unsigned) ruid);
+  pwd = getpwuid (ruid);
+  if (pwd == NULL)
+    r = 1;
+  else
+    printf ("(%s)", pwd->pw_name);
+
+  printf (" gid=%u", (unsigned) rgid);
+  grp = getgrgid (rgid);
+  if (grp == NULL)
+    r = 1;
+  else
+    printf ("(%s)", grp->gr_name);
+
+  if (euid != ruid)
+    { 
+      printf (" euid=%u", (unsigned) euid);
+      pwd = getpwuid (euid);
+      if (pwd == NULL)
+	r = 1;
+      else 
+	printf ("(%s)", pwd->pw_name);
+    }
+
+  if (egid != rgid) 
+    {
+      printf (" egid=%u", (unsigned) egid);
+      grp = getgrgid (egid);
+      if (grp == NULL)
+	r = 1;
+      else
+	printf ("(%s)", grp->gr_name);
+    }
+
+  if (uname)
+    {
+      builtin_error ("supplementary groups for other users not yet implemented");
+      glist = (int *)NULL;
+      ng = 0;
+      r = 1;
+    }
+  else
+    glist = get_group_array (&ng);
+
+  if (ng > 0)
+    printf (" groups=");
+  for (i = 0; i < ng; i++)
+    {
+      if (i > 0)
+	printf (", ");
+      printf ("%u", (unsigned) glist[i]);
+      grp = getgrgid (glist[i]);
+      if (grp == NULL)
+	r = 1;
+      else
+	printf ("(%s)", grp->gr_name);
+    }
+
+  return r;
+}
+
+char *id_doc[] = {
+	"Display information about user."
+	"",
+	"Return information about user identity",
+	(char *)NULL
+};
+
+struct builtin id_struct = {
+	"id",
+	id_builtin,
+	BUILTIN_ENABLED,
+	id_doc,
+	"id [user]\n\tid -G [-n] [user]\n\tid -g [-nr] [user]\n\tid -u [-nr] [user]",
+	0
+};
diff --git a/examples/loadables/ln.c b/examples/loadables/ln.c
new file mode 100644
index 0000000..874e9db
--- /dev/null
+++ b/examples/loadables/ln.c
@@ -0,0 +1,236 @@
+/* ln - make links */
+
+/* See Makefile for compilation details. */
+
+/*
+   Copyright (C) 1999-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include "bashtypes.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "posixstat.h"
+
+#include <stdio.h>
+#include <errno.h>
+
+#include "builtins.h"
+#include "shell.h"
+#include "bashgetopt.h"
+#include "common.h"
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+typedef int unix_link_syscall_t PARAMS((const char *, const char *));
+
+#define LN_SYMLINK 0x01
+#define LN_UNLINK  0x02
+#define LN_NOFOLLOW 0x04
+
+static unix_link_syscall_t *linkfn;
+static int dolink ();
+
+int
+ln_builtin (list)
+     WORD_LIST *list;
+{
+  int rval, opt, flags;
+  WORD_LIST *l;
+  char *sdir;
+  struct stat sb;
+
+  flags = 0;
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "fs")) != -1)
+    {
+      switch (opt)
+	{
+	case 'f':
+	  flags |= LN_UNLINK;
+	  break;
+	case 's':
+	  flags |= LN_SYMLINK;
+	  break;
+	case 'h':
+	case 'n':
+	  flags |= LN_NOFOLLOW;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+  if (list == 0)
+    {
+      builtin_usage ();
+      return (EX_USAGE);
+    }
+    
+  linkfn = (flags & LN_SYMLINK) ? symlink : link;  
+
+  if (list->next == 0)			/* ln target, equivalent to ln target . */
+    return (dolink (list->word->word, ".", flags));
+
+  if (list->next->next == 0)		/* ln target source */
+    return (dolink (list->word->word, list->next->word->word, flags));
+
+  /* ln target1 target2 ... directory */
+
+  /* find last argument: target directory, and make sure it's an existing
+     directory. */
+  for (l = list; l->next; l = l->next)  
+    ;
+  sdir = l->word->word;
+
+  if (stat(sdir, &sb) < 0)
+    {
+      builtin_error ("%s", sdir);
+      return (EXECUTION_FAILURE);
+    }
+
+  if (S_ISDIR (sb.st_mode) == 0)
+    {
+      builtin_usage ();
+      return (EX_USAGE);
+    }
+
+  for (rval = EXECUTION_SUCCESS; list != l; list = list->next)
+    rval += dolink (list->word->word, sdir, flags);
+  
+  return rval;
+}
+
+static char *
+mkdirpath (dir, file)
+     char *dir, *file;
+{
+  int dlen, flen;
+  char *ret;
+
+  dlen = strlen (dir);
+  flen = strlen (file);
+
+  ret = xmalloc (2 + dlen + flen);
+
+  strcpy (ret, dir);
+  if (ret[dlen - 1] != '/')
+    ret[dlen++] = '/';
+  strcpy (ret + dlen, file);
+  return ret;
+}
+
+#if defined (HAVE_LSTAT)
+#  define LSTAT lstat
+#  define LSTAT_OR_STAT_IF(c, f, b)	((c) ? lstat((f), (b)) : stat((f), (b)))
+#else
+#  define LSTAT stat
+#  define LSTAT_OR_STAT_IF(c, f, b)	(stat((f), (b)))
+#endif
+
+static int
+dolink (src, dst, flags)
+     char *src, *dst;
+     int flags;
+{
+  struct stat ssb, dsb;
+  int exists;
+  char *dst_path, *p;
+
+  /* If we're not doing symlinks, the source must exist and not be a 
+     directory. */
+  if ((flags & LN_SYMLINK) == 0)
+    {
+      if (stat (src, &ssb) != 0)
+	{
+	  builtin_error ("%s: %s", src, strerror (errno));
+	  return (EXECUTION_FAILURE);
+	}
+      if (S_ISDIR (ssb.st_mode))
+	{
+	  errno = EISDIR;
+	  builtin_error ("%s: %s", src, strerror (errno));
+	  return (EXECUTION_FAILURE);
+	}
+    }
+
+  /* If the destination is a directory, create the final filename by appending
+     the basename of the source to the destination. */
+  dst_path = 0;
+  if ((LSTAT_OR_STAT_IF((flags & LN_NOFOLLOW), dst, &dsb) == 0) && S_ISDIR (dsb.st_mode))
+    {
+      if ((p = strrchr (src, '/')) == 0)
+	p = src;
+      else
+	p++;
+
+      dst_path = mkdirpath (dst, p);
+      dst = dst_path;
+    }
+
+  exists = LSTAT (dst, &dsb) == 0;
+
+  /* If -f was specified, and the destination exists, unlink it. */
+  if ((flags & LN_UNLINK) && exists && unlink (dst) != 0)
+    {
+      builtin_error ("%s: cannot unlink: %s", dst, strerror (errno));
+      FREE (dst_path);
+      return (EXECUTION_FAILURE);
+    }
+
+  /* Perform the link. */
+  if ((*linkfn) (src, dst) != 0)
+    {
+      builtin_error ("cannot link %s to %s: %s", dst, src, strerror (errno));
+      FREE (dst_path);
+      return (EXECUTION_FAILURE);
+    }
+
+  FREE (dst_path);
+  return (EXECUTION_SUCCESS);
+}
+
+char *ln_doc[] = {
+	"Link files.",
+	"",
+	"Create a new directory entry with the same modes as the original",
+	"file.  The -f option means to unlink any existing file, permitting",
+	"the link to occur.  The -s option means to create a symbolic link.",
+	"By default, ln makes hard links.  Specifying -n or its synonym -h",
+	"causes ln to not resolve symlinks in the target file or directory.",
+	(char *)NULL
+};
+
+/* The standard structure describing a builtin command.  bash keeps an array
+   of these structures. */
+struct builtin ln_struct = {
+	"ln",		/* builtin name */
+	ln_builtin,		/* function implementing the builtin */
+	BUILTIN_ENABLED,	/* initial flags for builtin */
+	ln_doc,		/* array of long documentation strings. */
+	"ln [-fhns] file1 [file2] OR ln [-fhns] file ... directory",	/* usage synopsis; becomes short_doc */
+	0			/* reserved for internal use */
+};
diff --git a/examples/loadables/loadables.h b/examples/loadables/loadables.h
new file mode 100644
index 0000000..c730357
--- /dev/null
+++ b/examples/loadables/loadables.h
@@ -0,0 +1,34 @@
+/* loadables.h -- Include files needed by all loadable builtins */
+
+/* Copyright (C) 2015 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+
+#ifndef __LOADABLES_H_
+#define __LOADABLES_H_
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "builtins.h"
+#include "shell.h"
+#include "bashgetopt.h"
+#include "common.h"
+
+#endif
diff --git a/examples/loadables/logname.c b/examples/loadables/logname.c
new file mode 100644
index 0000000..27e6591
--- /dev/null
+++ b/examples/loadables/logname.c
@@ -0,0 +1,74 @@
+/* logname - print login name of current user */
+
+/*
+   Copyright (C) 1999-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+
+#include "builtins.h"
+#include "shell.h"
+#include "common.h"
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+int
+logname_builtin (list)
+     WORD_LIST *list;
+{
+  char *np;
+
+  if (no_options (list))
+    return (EX_USAGE);
+
+  np = getlogin ();
+  if (np == 0)
+    {
+      builtin_error ("cannot find username: %s", strerror (errno));
+      return (EXECUTION_FAILURE);
+    }
+  printf ("%s\n", np);
+  return (EXECUTION_SUCCESS);
+}
+
+char *logname_doc[] = {
+	"Display user login name.",
+	"",
+	"Write the current user's login name to the standard output",
+	"and exit.  logname ignores the LOGNAME and USER variables.",
+	"logname ignores any non-option arguments.",
+	(char *)NULL
+};
+	
+struct builtin logname_struct = {
+	"logname",
+	logname_builtin,
+	BUILTIN_ENABLED,
+	logname_doc,
+	"logname",
+	0
+};
+	
diff --git a/examples/loadables/mkdir.c b/examples/loadables/mkdir.c
new file mode 100644
index 0000000..d5d3955
--- /dev/null
+++ b/examples/loadables/mkdir.c
@@ -0,0 +1,245 @@
+/* mkdir - make directories */
+
+/* See Makefile for compilation details. */
+
+/*
+   Copyright (C) 1999-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#include "bashtypes.h"
+#include "posixstat.h"
+#include <errno.h>
+#include <stdio.h>
+#include "bashansi.h"
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "builtins.h"
+#include "shell.h"
+#include "bashgetopt.h"
+#include "common.h"
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+#define ISOCTAL(c)	((c) >= '0' && (c) <= '7')
+
+extern int parse_symbolic_mode ();
+
+static int make_path ();
+
+static int original_umask;
+
+int
+mkdir_builtin (list)
+     WORD_LIST *list;
+{
+  int opt, pflag, mflag, omode, rval, nmode, parent_mode;
+  char *mode;
+  WORD_LIST *l;
+
+  reset_internal_getopt ();
+  pflag = mflag = 0;
+  mode = (char *)NULL;
+  while ((opt = internal_getopt(list, "m:p")) != -1)
+    switch (opt)
+      {
+	case 'p':
+	  pflag = 1;
+	  break;
+	case 'm':
+	  mflag = 1;
+	  mode = list_optarg;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage();
+	  return (EX_USAGE);
+      }
+  list = loptend;
+
+  if (list == 0)
+    {
+      builtin_usage ();
+      return (EX_USAGE);
+    }
+
+  if (mode == NULL)
+    omode = S_IRWXU | S_IRWXG | S_IRWXO;	/* a=rwx */
+  else if (ISOCTAL (*mode))	/* octal number */
+    {
+      omode = read_octal (mode);
+      if (omode < 0)
+	{
+	  builtin_error ("invalid file mode: %s", mode);
+	  return (EXECUTION_FAILURE);
+	}
+    }
+  else 				/* symbolic mode */
+    {
+      /* initial bits are a=rwx; the mode argument modifies them */
+      omode = parse_symbolic_mode (mode, S_IRWXU | S_IRWXG | S_IRWXO);
+      if (omode < 0)
+	{
+	  builtin_error ("invalid file mode: %s", mode);
+	  return (EXECUTION_FAILURE);
+	}
+    }
+
+  /* Make the new mode */
+  original_umask = umask (0);
+  umask (original_umask);
+
+  nmode = (S_IRWXU | S_IRWXG | S_IRWXO) & ~original_umask;
+  parent_mode = nmode | (S_IWUSR|S_IXUSR);	/* u+wx */
+
+  /* Adjust new mode based on mode argument */
+  nmode &= omode;
+
+  for (rval = EXECUTION_SUCCESS, l = list; l; l = l->next)
+    {
+      if (pflag && make_path (l->word->word, mflag, nmode, parent_mode))
+	{
+	  rval = EXECUTION_FAILURE;
+	  continue;
+	}
+      else if (pflag == 0 && mkdir (l->word->word, nmode) < 0)
+        {
+          builtin_error ("cannot create directory `%s': %s", l->word->word, strerror (errno));
+          rval = EXECUTION_FAILURE;
+        }
+    }
+  return rval;
+}
+
+/* Make all the directories leading up to PATH, then create PATH.  Note that
+   this changes the process's umask; make sure that all paths leading to a
+   return reset it to ORIGINAL_UMASK */
+static int
+make_path (path, user_mode, nmode, parent_mode)
+     char *path;
+     int user_mode;
+     int nmode, parent_mode;
+{
+  int oumask;
+  struct stat sb;
+  char *p, *npath;
+
+  if (stat (path, &sb) == 0)
+    {
+      if (S_ISDIR (sb.st_mode) == 0)
+	{
+	  builtin_error ("`%s': file exists but is not a directory", path);
+	  return 1;
+	}
+	
+      if (user_mode && chmod (path, nmode))
+        {
+          builtin_error ("%s: %s", path, strerror (errno));
+          return 1;
+        }
+
+      return 0;
+    }
+
+  oumask = umask (0);
+  npath = savestring (path);	/* So we can write to it. */
+    
+  /* Check whether or not we need to do anything with intermediate dirs. */
+
+  /* Skip leading slashes. */
+  p = npath;
+  while (*p == '/')
+    p++;
+
+  while (p = strchr (p, '/'))
+    {
+      *p = '\0';
+      if (stat (npath, &sb) != 0)
+	{
+	  if (mkdir (npath, 0))
+	    {
+	      builtin_error ("cannot create directory `%s': %s", npath, strerror (errno));
+	      umask (original_umask);
+	      free (npath);
+	      return 1;
+	    }
+	  if (chmod (npath, parent_mode) != 0)
+	    {
+	      builtin_error ("cannot chmod directory `%s': %s", npath, strerror (errno));
+	      umask (original_umask);
+	      free (npath);
+	      return 1;
+	    }
+	}
+      else if (S_ISDIR (sb.st_mode) == 0)
+        {
+          builtin_error ("`%s': file exists but is not a directory", npath);
+          umask (original_umask);
+          free (npath);
+          return 1;
+        }
+
+      *p++ = '/';	/* restore slash */
+      while (*p == '/')
+	p++;
+    }
+
+  /* Create the final directory component. */
+  if (stat (npath, &sb) && mkdir (npath, nmode))
+    {
+      builtin_error ("cannot create directory `%s': %s", npath, strerror (errno));
+      umask (original_umask);
+      free (npath);
+      return 1;
+    }
+
+  umask (original_umask);
+  free (npath);
+  return 0;
+}
+
+char *mkdir_doc[] = {
+	"Create directories.",
+	"",
+	"Make directories.  Create the directories named as arguments, in",
+	"the order specified, using mode rwxrwxrwx as modified by the current",
+	"umask (see `help umask').  The -m option causes the file permission",
+	"bits of the final directory to be MODE.  The MODE argument may be",
+	"an octal number or a symbolic mode like that used by chmod(1).  If",
+	"a symbolic mode is used, the operations are interpreted relative to",
+	"an initial mode of \"a=rwx\".  The -p option causes any required",
+	"intermediate directories in PATH to be created.  The directories",
+	"are created with permssion bits of rwxrwxrwx as modified by the current",
+	"umask, plus write and search permissions for the owner.  mkdir",
+	"returns 0 if the directories are created successfully, and non-zero",
+	"if an error occurs.",
+	(char *)NULL
+};
+
+struct builtin mkdir_struct = {
+	"mkdir",
+	mkdir_builtin,
+	BUILTIN_ENABLED,
+	mkdir_doc,
+	"mkdir [-p] [-m mode] directory [directory ...]",
+	0
+};
diff --git a/examples/loadables/mkfifo.c b/examples/loadables/mkfifo.c
new file mode 100644
index 0000000..2bc4e98
--- /dev/null
+++ b/examples/loadables/mkfifo.c
@@ -0,0 +1,146 @@
+/* mkfifo - make FIFOs */
+
+/* See Makefile for compilation details. */
+
+/*
+   Copyright (C) 1999-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#include "bashtypes.h"
+#include "posixstat.h"
+#include <errno.h>
+#include <stdio.h>
+#include "bashansi.h"
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "builtins.h"
+#include "shell.h"
+#include "bashgetopt.h"
+#include "common.h"
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+#define ISOCTAL(c)	((c) >= '0' && (c) <= '7')
+
+extern int parse_symbolic_mode ();
+
+static int original_umask;
+
+int
+mkfifo_builtin (list)
+     WORD_LIST *list;
+{
+  int opt, mflag, omode, rval, nmode, basemode;
+  char *mode;
+  WORD_LIST *l;
+
+  mflag = 0;
+  mode = (char *)NULL;
+
+  reset_internal_getopt ();
+  while ((opt = internal_getopt(list, "m:")) != -1)
+    switch (opt)
+      {
+	case 'm':
+	  mflag = 1;
+	  mode = list_optarg;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage();
+	  return (EX_USAGE);
+      }
+  list = loptend;
+
+  if (list == 0)
+    {
+      builtin_usage ();
+      return (EX_USAGE);
+    }
+
+  basemode = S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH | S_IWOTH;
+  if (mode == NULL)
+    omode = basemode;
+  else if (ISOCTAL (*mode))	/* octal number */
+    {
+      omode = read_octal (mode);
+      if (omode < 0)
+	{
+	  builtin_error ("invalid file mode: %s", mode);
+	  return (EXECUTION_FAILURE);
+	}
+    }
+  else 				/* symbolic mode */
+    {
+      /* initial bits are a=rwx; the mode argument modifies them */
+      omode = parse_symbolic_mode (mode, basemode);
+      if (omode < 0)
+	{
+	  builtin_error ("invalid file mode: %s", mode);
+	  return (EXECUTION_FAILURE);
+	}
+    }
+
+  /* Make the new mode */
+  original_umask = umask (0);
+  umask (original_umask);
+
+  nmode = basemode & ~original_umask;
+  /* Adjust new mode based on mode argument */
+  nmode &= omode;
+
+  for (rval = EXECUTION_SUCCESS, l = list; l; l = l->next)
+    {
+      if (mkfifo (l->word->word, nmode) < 0)
+        {
+          builtin_error ("cannot create FIFO `%s': %s", l->word->word, strerror (errno));
+          rval = EXECUTION_FAILURE;
+        }
+    }
+  return rval;
+}
+
+
+char *mkfifo_doc[] = {
+	"Create FIFOs (named pipes).",
+	"",
+	"Make FIFOs.  Create the FIFOs named as arguments, in",
+	"the order specified, using mode a=rw as modified by the current",
+	"umask (see `help umask').  The -m option causes the file permission",
+	"bits of the final FIFO to be MODE.  The MODE argument may be",
+	"an octal number or a symbolic mode like that used by chmod(1).  If",
+	"a symbolic mode is used, the operations are interpreted relative to",
+	"an initial mode of \"a=rw\".  mkfifo returns 0 if the FIFOs are",
+	"umask, plus write and search permissions for the owner.  mkdir",
+	"created successfully, and non-zero if an error occurs.",
+	(char *)NULL
+};
+
+struct builtin mkfifo_struct = {
+	"mkfifo",
+	mkfifo_builtin,
+	BUILTIN_ENABLED,
+	mkfifo_doc,
+	"mkfifo [-m mode] fifo_name [fifo_name ...]",
+	0
+};
diff --git a/examples/loadables/mktemp.c b/examples/loadables/mktemp.c
new file mode 100644
index 0000000..1f7c9ad
--- /dev/null
+++ b/examples/loadables/mktemp.c
@@ -0,0 +1,212 @@
+/* mktemp - create temporary file or directory */
+
+/*
+   Copyright (C) 2019 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include "bashansi.h"
+
+#include "loadables.h"
+
+#define DEFAULT_PREFIX	"shtmp"
+
+int
+mktemp_builtin (list)
+     WORD_LIST *list;
+{
+  WORD_LIST *l;
+  int rval, opt, fd, mflags, base_mflags;
+  int dflag, qflag, tflag, uflag, onetime;
+  char *prefix, *varname, *filename, *template;
+  SHELL_VAR *v;
+
+  dflag = qflag = uflag = tflag = onetime = 0;
+  prefix = varname = 0;
+  rval = EXECUTION_SUCCESS;
+
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "dqut:v:")) != -1)
+    {
+      switch (opt)
+	{
+	case 'd':
+	  dflag = 1;
+	  break;
+	case 'q':
+	  qflag = 1;
+	  break;
+	case 't':
+	  tflag = 1;
+	  prefix = list_optarg;
+	  break;
+	case 'u':
+	  uflag = 1;
+	  break;
+	case 'v':
+	  varname = list_optarg;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+  if (varname)			/* check for validity, not readonly */
+    {
+      if (legal_identifier (varname) == 0)
+	{
+	  if (qflag == 0)
+	    sh_invalidid (varname);
+	  return (EXECUTION_FAILURE);
+	}
+      v = find_variable (varname);
+      if (v && readonly_p (v))
+	{
+	  if (qflag == 0)
+	    sh_readonly (varname);
+	  return (EXECUTION_FAILURE);
+	}
+    }
+
+  onetime = (list == 0);	/* once through the loop, $TMPDIR/prefix.XXXXXX */
+
+  if (prefix == 0)
+    prefix = DEFAULT_PREFIX;
+  base_mflags = MT_USETMPDIR|MT_USERANDOM;	/* USERANDOM not strictly needed */
+
+  while (list || onetime)
+    {
+      mflags = base_mflags;
+      onetime = 0;
+#if defined (USE_MKTEMP) && defined (USE_MKSTEMP)
+      if (list)
+	{
+	  template = list->word->word;
+	  mflags |= MT_TEMPLATE;
+	}
+#else
+      /* This is sub-optimal. */
+      if (list)
+	{
+	  /* Treat the basename as a prefix */
+	  template = strrchr (list->word->word, '/');
+	  if (template)
+	    template++;
+	  else
+	    template = list->word->word;
+	}
+#endif
+      else
+	template = prefix;
+
+      if (dflag)
+	{
+	  filename = sh_mktmpdir (template, mflags);
+	  if (filename == 0)
+	    {
+	      if (qflag == 0)
+		builtin_error ("%s: cannot create directory", template);
+	      rval = EXECUTION_FAILURE;
+	    }
+	  else
+	    {
+	      if (uflag)
+		rmdir (filename);
+	      printf ("%s\n", filename);
+	    }
+	}
+      else		/* filename */
+	{
+	  fd = sh_mktmpfd (template, mflags, &filename);
+	  if (fd < 0)
+	    {
+	      if (qflag == 0)
+		builtin_error ("%s: cannot create file", template);
+	      rval = EXECUTION_FAILURE;
+	    }
+	  else
+	    {
+	      close (fd);
+	      if (uflag)
+		unlink (filename);
+	      printf ("%s\n", filename);
+	    }
+	}
+
+      /* Assign variable if requested */
+      if (filename && varname)
+	{
+	  v = builtin_bind_variable (varname, filename, 0);
+	  if (v == 0 || readonly_p (v) || noassign_p (v))
+	    {
+	      builtin_error ("%s: cannot set variable", varname);
+	      rval = EXECUTION_FAILURE;
+	    }
+	}
+
+      FREE (filename);
+
+      if (list)
+        list = list->next;
+    }
+
+  return (rval);
+}
+
+char *mktemp_doc[] = {
+	"Make unique temporary file name",
+	"",
+	"Take each supplied filename template and overwrite a portion of it",
+	"to create a filename, which is unique and may be used by the calling",
+	"script. TEMPLATE is a string ending in some number of 'X's. If",
+	"TEMPLATE is not supplied, shtmp.XXXXXX is used and $TMPDIR is used as",
+	"the name of the containing directory. Files are created u+rw; directories",
+	"are created u+rwx.",
+	"",
+	"Options, if supplied, have the following meanings:",
+	"",
+	"    -d    Create a directory instead of a file",
+	"    -q    Do not print error messages about file creation failure",
+	"    -t PREFIX Use PREFIX as the directory in which to create files",
+	"    -u    Do not create anything; simply print a name",
+	"    -v VAR    Store the generated name into shell variable VAR",
+	"",
+	"Any PREFIX supplied with -t is ignored if TEMPLATE is supplied.",
+	"",
+	"The return status is true if the file or directory was created successfully;",
+	"false if an error occurs or VAR is invalid or readonly.",
+
+	(char *)NULL
+};
+
+struct builtin mktemp_struct = {
+	"mktemp",		/* builtin name */
+	mktemp_builtin,		/* function implementing the builtin */
+	BUILTIN_ENABLED,	/* initial flags for builtin */
+	mktemp_doc,		/* array of long documentation strings. */
+	"mktemp [-d] [-q] [-t prefix] [-u] [-v varname] [template] ...",
+	0			/* reserved for internal use */
+};
diff --git a/examples/loadables/mypid.c b/examples/loadables/mypid.c
new file mode 100644
index 0000000..fc1b267
--- /dev/null
+++ b/examples/loadables/mypid.c
@@ -0,0 +1,89 @@
+/* This module should be dynamically loaded with enable -f
+ * which would create a new builtin named mypid. You'll need
+ * the source code for GNU bash to recompile this module.
+ *
+ * Then, from within bash, enable -f ./mypid enable_mypid, where ./mypid
+ * is the binary obtained from running make. Hereafter, `${MYPID}'
+ * is a shell builtin variable.
+ *
+ * This defines an unload hook function that is called when the builtin is
+ * deleted with enable -d that will unbind the MYPID variable so future
+ * references to it do not attempt to access memory that is no longer part
+ * of this process's address space.
+ */
+#include <config.h>
+
+#include <stdio.h>
+#include <errno.h>
+#include <string.h>
+
+#include "builtins.h"
+#include "shell.h"
+
+#define INIT_DYNAMIC_VAR(var, val, gfunc, afunc) \
+  do \
+    { SHELL_VAR *v = bind_variable (var, (val), 0); \
+      if (v) \
+	{ \
+	  v->dynamic_value = gfunc; \
+	  v->assign_func = afunc; \
+	} \
+    } \
+  while (0)
+
+static SHELL_VAR *
+assign_mypid (
+     SHELL_VAR *self,
+     char *value,
+     arrayind_t unused,
+     char *key )
+{
+  return (self);
+}
+
+static SHELL_VAR *
+get_mypid (SHELL_VAR *var)
+{
+  int rv;
+  char *p;
+
+  rv = getpid();
+  p = itos (rv);
+
+  FREE (value_cell (var));
+
+  VSETATTR (var, att_integer);
+  var_setvalue (var, p);
+  return (var);
+}
+
+int
+enable_mypid_builtin(WORD_LIST *list)
+{
+  INIT_DYNAMIC_VAR ("MYPID", (char *)NULL, get_mypid, assign_mypid);
+
+  return 0;
+}
+
+void
+enable_mypid_builtin_unload (char *s)
+{
+  unbind_variable ("MYPID");
+}
+
+char const *enable_mypid_doc[] = {
+  "Enable $MYPID.",
+  "",
+  "Enables use of the ${MYPID} dynamic variable.  ",
+  "It will yield the current pid of a subshell.",
+  (char *)0
+};
+
+struct builtin enable_mypid_struct = {
+  "enable_mypid",
+  enable_mypid_builtin,
+  BUILTIN_ENABLED,
+  (char**)(void*)enable_mypid_doc,
+  "enable_mypid N",
+  0
+};
diff --git a/examples/loadables/necho.c b/examples/loadables/necho.c
new file mode 100644
index 0000000..dd2092b
--- /dev/null
+++ b/examples/loadables/necho.c
@@ -0,0 +1,54 @@
+/* necho - echo without options or argument interpretation */
+
+/* Sample builtin to be dynamically loaded with enable -f and replace an
+   existing builtin. */
+
+/*
+   Copyright (C) 1999-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdio.h>
+#include "builtins.h"
+#include "shell.h"
+
+int
+necho_builtin (list)
+WORD_LIST *list;
+{
+	print_word_list (list, " ");
+	printf("\n");
+	fflush (stdout);
+	return (EXECUTION_SUCCESS);
+}
+
+char *necho_doc[] = {
+	"Display arguments.",
+	"",
+	"Print the arguments to the standard output separated",
+	"by space characters and terminated with a newline.",
+	(char *)NULL
+};
+	
+struct builtin necho_struct = {
+	"echo",
+	necho_builtin,
+	BUILTIN_ENABLED,
+	necho_doc,
+	"echo [args]",
+	0
+};
+	
diff --git a/examples/loadables/pathchk.c b/examples/loadables/pathchk.c
new file mode 100644
index 0000000..c1151db
--- /dev/null
+++ b/examples/loadables/pathchk.c
@@ -0,0 +1,381 @@
+/* pathchk - check pathnames for validity and portability */
+
+/* Usage: pathchk [-p] path ...
+
+   For each PATH, print a message if any of these conditions are false:
+   * all existing leading directories in PATH have search (execute) permission
+   * strlen (PATH) <= PATH_MAX
+   * strlen (each_directory_in_PATH) <= NAME_MAX
+
+   Exit status:
+   0			All PATH names passed all of the tests.
+   1			An error occurred.
+
+   Options:
+   -p			Instead of performing length checks on the
+			underlying filesystem, test the length of the
+			pathname and its components against the POSIX.1
+			minimum limits for portability, _POSIX_NAME_MAX
+			and _POSIX_PATH_MAX in 2.9.2.  Also check that
+			the pathname contains no character not in the
+			portable filename character set. */
+
+/* See Makefile for compilation details. */
+
+/*
+   Copyright (C) 1999-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#include <sys/types.h>
+#include "posixstat.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#if defined (HAVE_LIMITS_H)
+#  include <limits.h>
+#endif
+
+#include "bashansi.h"
+
+#include <stdio.h>
+#include <errno.h>
+
+#include "builtins.h"
+#include "shell.h"
+#include "stdc.h"
+#include "bashgetopt.h"
+#include "maxpath.h"
+#include "common.h"
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+#if !defined (_POSIX_PATH_MAX)
+#  define _POSIX_PATH_MAX 255
+#endif
+#if !defined (_POSIX_NAME_MAX)
+#  define _POSIX_NAME_MAX 14
+#endif
+
+/* How do we get PATH_MAX? */
+#if defined (_POSIX_VERSION) && !defined (PATH_MAX)
+#  define PATH_MAX_FOR(p) pathconf ((p), _PC_PATH_MAX)
+#endif
+
+/* How do we get NAME_MAX? */
+#if defined (_POSIX_VERSION) && !defined (NAME_MAX)
+#  define NAME_MAX_FOR(p) pathconf ((p), _PC_NAME_MAX)
+#endif
+
+#if !defined (PATH_MAX_FOR)
+#  define PATH_MAX_FOR(p)	PATH_MAX
+#endif
+
+#if !defined (NAME_MAX_FOR)
+#  define NAME_MAX_FOR(p)	NAME_MAX
+#endif
+
+extern char *strerror ();
+
+static int validate_path ();
+
+int
+pathchk_builtin (list)
+     WORD_LIST *list;
+{
+  int retval, pflag, opt;
+
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "p")) != -1)
+    {
+      switch (opt)
+	{
+	case 'p':
+	  pflag = 1;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+  if (list == 0)
+    {
+      builtin_usage ();
+      return (EX_USAGE);
+    }
+
+  for (retval = 0; list; list = list->next)
+    retval |= validate_path (list->word->word, pflag);
+
+  return (retval ? EXECUTION_FAILURE : EXECUTION_SUCCESS);
+}
+
+char *pathchk_doc[] = {
+	"Check pathnames for validity.",
+	"",
+	"Check each pathname argument for validity (i.e., it may be used to",
+	"create or access a file without causing syntax errors) and portability",
+	"(i.e., no filename truncation will result).  If the `-p' option is",
+	"supplied, more extensive portability checks are performed.",
+	(char *)NULL
+};
+
+/* The standard structure describing a builtin command.  bash keeps an array
+   of these structures. */
+struct builtin pathchk_struct = {
+	"pathchk",		/* builtin name */
+	pathchk_builtin,	/* function implementing the builtin */
+	BUILTIN_ENABLED,	/* initial flags for builtin */
+	pathchk_doc,		/* array of long documentation strings. */
+	"pathchk [-p] pathname ...",	/* usage synopsis */
+	0			/* reserved for internal use */
+};
+
+/* The remainder of this file is stolen shamelessly from `pathchk.c' in
+   the sh-utils-1.12 distribution, by 
+
+   David MacKenzie <djm@gnu.ai.mit.edu>
+   and Jim Meyering <meyering@cs.utexas.edu> */
+
+/* Each element is nonzero if the corresponding ASCII character is
+   in the POSIX portable character set, and zero if it is not.
+   In addition, the entry for `/' is nonzero to simplify checking. */
+static char const portable_chars[256] =
+{
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0-15 */
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 16-31 */
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, /* 32-47 */
+  1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, /* 48-63 */
+  0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 64-79 */
+  1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 1, /* 80-95 */
+  0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 96-111 */
+  1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, /* 112-127 */
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+};
+
+/* If PATH contains only portable characters, return 1, else 0.  */
+
+static int
+portable_chars_only (path)
+     const char *path;
+{
+  const char *p;
+
+  for (p = path; *p; ++p)
+    if (portable_chars[(const unsigned char) *p] == 0)
+      {
+	builtin_error ("path `%s' contains nonportable character `%c'", path, *p);
+	return 0;
+      }
+  return 1;
+}
+
+/* On some systems, stat can return EINTR.  */
+
+#ifndef EINTR
+# define SAFE_STAT(name, buf) stat (name, buf)
+#else
+# define SAFE_STAT(name, buf) safe_stat (name, buf)
+static inline int
+safe_stat (name, buf)
+     const char *name;
+     struct stat *buf;
+{
+  int ret;
+
+  do
+    ret = stat (name, buf);
+  while (ret < 0 && errno == EINTR);
+
+  return ret;
+}
+#endif
+
+/* Return 1 if PATH is a usable leading directory, 0 if not,
+   2 if it doesn't exist.  */
+
+static int
+dir_ok (path)
+     const char *path;
+{
+  struct stat stats;
+
+  if (SAFE_STAT (path, &stats))
+    return 2;
+
+  if (!S_ISDIR (stats.st_mode))
+    {
+      builtin_error ("`%s' is not a directory", path);
+      return 0;
+    }
+
+  /* Use access to test for search permission because
+     testing permission bits of st_mode can lose with new
+     access control mechanisms.  Of course, access loses if you're
+     running setuid. */
+  if (access (path, X_OK) != 0)
+    {
+      if (errno == EACCES)
+	builtin_error ("directory `%s' is not searchable", path);
+      else
+	builtin_error ("%s: %s", path, strerror (errno));
+      return 0;
+    }
+
+  return 1;
+}
+
+static char *
+xstrdup (s)
+     char *s;
+{
+  return (savestring (s));
+}
+
+/* Make sure that
+   strlen (PATH) <= PATH_MAX
+   && strlen (each-existing-directory-in-PATH) <= NAME_MAX
+
+   If PORTABILITY is nonzero, compare against _POSIX_PATH_MAX and
+   _POSIX_NAME_MAX instead, and make sure that PATH contains no
+   characters not in the POSIX portable filename character set, which
+   consists of A-Z, a-z, 0-9, ., _, -.
+
+   Make sure that all leading directories along PATH that exist have
+   `x' permission.
+
+   Return 0 if all of these tests are successful, 1 if any fail. */
+
+static int
+validate_path (path, portability)
+     char *path;
+     int portability;
+{
+  int path_max;
+  int last_elem;		/* Nonzero if checking last element of path. */
+  int exists;			/* 2 if the path element exists.  */
+  char *slash;
+  char *parent;			/* Last existing leading directory so far.  */
+
+  if (portability && !portable_chars_only (path))
+    return 1;
+
+  if (*path == '\0')
+    return 0;
+
+#ifdef lint
+  /* Suppress `used before initialized' warning.  */
+  exists = 0;
+#endif
+
+  /* Figure out the parent of the first element in PATH.  */
+  parent = xstrdup (*path == '/' ? "/" : ".");
+
+  slash = path;
+  last_elem = 0;
+  while (1)
+    {
+      int name_max;
+      int length;		/* Length of partial path being checked. */
+      char *start;		/* Start of path element being checked. */
+
+      /* Find the end of this element of the path.
+	 Then chop off the rest of the path after this element. */
+      while (*slash == '/')
+	slash++;
+      start = slash;
+      slash = strchr (slash, '/');
+      if (slash != NULL)
+	*slash = '\0';
+      else
+	{
+	  last_elem = 1;
+	  slash = strchr (start, '\0');
+	}
+
+      if (!last_elem)
+	{
+	  exists = dir_ok (path);
+	  if (exists == 0)
+	    {
+	      free (parent);
+	      return 1;
+	    }
+	}
+
+      length = slash - start;
+      /* Since we know that `parent' is a directory, it's ok to call
+	 pathconf with it as the argument.  (If `parent' isn't a directory
+	 or doesn't exist, the behavior of pathconf is undefined.)
+	 But if `parent' is a directory and is on a remote file system,
+	 it's likely that pathconf can't give us a reasonable value
+	 and will return -1.  (NFS and tempfs are not POSIX . . .)
+	 In that case, we have no choice but to assume the pessimal
+	 POSIX minimums.  */
+      name_max = portability ? _POSIX_NAME_MAX : NAME_MAX_FOR (parent);
+      if (name_max < 0)
+	name_max = _POSIX_NAME_MAX;
+      if (length > name_max)
+	{
+	  builtin_error ("name `%s' has length %d; exceeds limit of %d",
+		 start, length, name_max);
+	  free (parent);
+	  return 1;
+	}
+
+      if (last_elem)
+	break;
+
+      if (exists == 1)
+	{
+	  free (parent);
+	  parent = xstrdup (path);
+	}
+
+      *slash++ = '/';
+    }
+
+  /* `parent' is now the last existing leading directory in the whole path,
+     so it's ok to call pathconf with it as the argument.  */
+  path_max = portability ? _POSIX_PATH_MAX : PATH_MAX_FOR (parent);
+  if (path_max < 0)
+    path_max = _POSIX_PATH_MAX;
+  free (parent);
+  if (strlen (path) > path_max)
+    {
+      builtin_error ("path `%s' has length %lu; exceeds limit of %d",
+	     path, (unsigned long)strlen (path), path_max);
+      return 1;
+    }
+
+  return 0;
+}
diff --git a/examples/loadables/perl/Makefile.in b/examples/loadables/perl/Makefile.in
new file mode 100644
index 0000000..59f39b6
--- /dev/null
+++ b/examples/loadables/perl/Makefile.in
@@ -0,0 +1,99 @@
+#
+# Makefile for builtin perl interpreter
+#
+#
+#   Copyright (C) 1998 Free Software Foundation, Inc.     
+#
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+# Include some boilerplate Gnu makefile definitions.
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+libdir = @libdir@
+infodir = @infodir@
+includedir = @includedir@
+
+datarootdir = @datarootdir@
+
+topdir = @top_srcdir@
+BUILD_DIR = @BUILD_DIR@
+srcdir = @srcdir@
+VPATH = @srcdir@
+
+@SET_MAKE@
+CC = @CC@
+RM = rm -f
+
+SHELL = @MAKE_SHELL@
+
+PERL5 = perl5
+
+CFLAGS = @CFLAGS@
+
+#
+# These values are generated for configure by ${topdir}/support/shobj-conf.
+# If your system is not supported by that script, but includes facilities for
+# dynamic loading of shared objects, please update the script and send the
+# changes to bash-maintainers@gnu.org.
+#
+SHOBJ_CC = @SHOBJ_CC@
+SHOBJ_CFLAGS = @SHOBJ_CFLAGS@
+SHOBJ_LD = @SHOBJ_LD@
+SHOBJ_LDFLAGS = @SHOBJ_LDFLAGS@
+SHOBJ_XLDFLAGS = @SHOBJ_XLDFLAGS@
+SHOBJ_LIBS = @SHOBJ_LIBS@
+SHOBJ_STATUS = @SHOBJ_STATUS@
+
+# Values used for compiling the perl files
+PERL_LDOPTS = `${PERL5} -MExtUtils::Embed -e ldopts`
+PERL_CFLAGS = ${CCFLAGS} `${PERL5} -MExtUtils::Embed -e ccopts`
+
+SRC = bperl.c iperl.c perlxsi.c
+OBJ = bperl.o iperl.o perlxsi.o
+
+BUILTIN = bperl5
+
+INC = -I. -I.. -I$(topdir) -I$(topdir)/lib -I$(topdir)/builtins \
+      -I$(topdir)/include -I$(BUILD_DIR) -I$(BUILD_DIR)/lib \
+      -I$(BUILD_DIR)/builtins
+
+
+${BUILTIN}:	${OBJ}
+	${RM} $@
+	${SHOBJ_LD} ${SHOBJ_LDFLAGS} ${SHOBJ_XLDFLAGS} -o $@ ${OBJ} ${PERL_LDOPTS} ${SHOBJ_LIBS}
+
+bperl.o:	bperl.c
+	${RM} $@
+	$(SHOBJ_CC) $(SHOBJ_CFLAGS) $(CFLAGS) $(INC) -c -o $@ ${srcdir}/bperl.c
+
+iperl.o:	iperl.c
+	${RM} $@
+	$(SHOBJ_CC) ${SHOBJ_CFLAGS} $(PERL_CFLAGS) -c -o $@ ${srcdir}/iperl.c
+
+perlxsi.c:
+	${PERL5} -MExtUtils::Embed -e xsinit -- -o $@
+
+perlxsi.o:	perlxsi.c
+	${RM} $@
+	${SHOBJ_CC} ${SHOBJ_CFLAGS} $(PERL_CFLAGS) -c -o $@ perlxsi.c
+
+clean mostlyclean:
+	${RM} ${OBJ}
+	${RM} ${BUILTIN}
+
+distclean maintainer-clean: clean
+	${RM} perlxsi.c
diff --git a/examples/loadables/perl/README b/examples/loadables/perl/README
new file mode 100644
index 0000000..a70a99b
--- /dev/null
+++ b/examples/loadables/perl/README
@@ -0,0 +1,6 @@
+This illustrates how to build a perl interpreter into bash.  It's not
+especially useful; more a proof of concept (it provides none of the
+bash internals to the perl interpreter, for example).
+
+This *may* require adding "-rpath /path/to/perl/CORE" and -lperl options
+when compiling bash itself.
diff --git a/examples/loadables/perl/bperl.c b/examples/loadables/perl/bperl.c
new file mode 100644
index 0000000..77e3f7c
--- /dev/null
+++ b/examples/loadables/perl/bperl.c
@@ -0,0 +1,46 @@
+/*
+ * perl builtin
+ */
+#include <config.h>
+
+#include <fcntl.h>
+#include <errno.h>
+
+#include "builtins.h"
+#include "shell.h"
+
+#ifndef errno
+extern int errno;
+#endif
+
+extern char **make_builtin_argv ();
+extern char **export_env;
+
+extern int perl_main();
+
+bperl_builtin(list)
+WORD_LIST *list;
+{
+	char	**v;
+	int	c, r;
+
+	v = make_builtin_argv(list, &c);
+	r = perl_main(c, v, export_env);
+	free(v);
+
+	return r;
+}
+
+char *bperl_doc[] = {
+	"An interface to a perl5 interpreter.",
+	(char *)0
+};
+
+struct builtin bperl_struct = {
+	"bperl",
+	bperl_builtin,
+	BUILTIN_ENABLED,
+	bperl_doc,
+	"bperl [perl options] [file ...]",
+	0
+};
diff --git a/examples/loadables/perl/iperl.c b/examples/loadables/perl/iperl.c
new file mode 100644
index 0000000..92a6038
--- /dev/null
+++ b/examples/loadables/perl/iperl.c
@@ -0,0 +1,24 @@
+#include <EXTERN.h>               /* from the Perl distribution     */
+#include <perl.h>                 /* from the Perl distribution     */
+
+extern void xs_init _((void));
+
+static PerlInterpreter *iperl;  /***    The Perl interpreter    ***/
+
+int
+perl_main(int argc, char **argv, char **env)
+{
+	int	r;
+
+	iperl = perl_alloc();
+	perl_construct(iperl);
+	perl_parse(iperl, xs_init, argc, argv, (char **)NULL);
+	r = perl_run(iperl);
+
+PerlIO_flush(PerlIO_stdout());
+PerlIO_flush(PerlIO_stderr());
+
+	perl_destruct(iperl);
+	perl_free(iperl);
+	return (r);
+}
diff --git a/examples/loadables/print.c b/examples/loadables/print.c
new file mode 100644
index 0000000..0120dbf
--- /dev/null
+++ b/examples/loadables/print.c
@@ -0,0 +1,192 @@
+/*
+ * print -- loadable ksh-93 style print builtin
+ */
+
+/*
+   Copyright (C) 1999-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef HAVE_CONFIG_H
+#  include <config.h>
+#endif
+
+#include "bashtypes.h"
+
+#include <errno.h>
+#include <limits.h>
+#include <stdio.h>
+
+#include "bashansi.h"
+#include "shell.h"
+#include "builtins.h"
+#include "stdc.h"
+#include "bashgetopt.h"
+#include "builtext.h"
+#include "common.h"
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+int print_builtin ();
+static int printargs ();
+
+static FILE *ofp;
+
+extern char *this_command_name;
+
+static char *print_doc[] = {
+  "Display arguments.",
+  "",
+  "Output the arguments.  The -f option means to use the argument as a",
+  "format string as would be supplied to printf(1).  The rest of the",
+  "options are as in ksh.",
+  (char *)NULL
+};
+
+struct builtin print_struct = {
+	"print",
+	print_builtin,
+	BUILTIN_ENABLED,
+	print_doc,
+	"print [-Rnprs] [-u unit] [-f format] [arguments]",
+	(char *)0
+};
+
+#ifndef ISOPTION
+#define ISOPTION(s, c)	(s[0] == '-' && s[2] == '\0' && s[1] == c)
+#endif
+
+int
+print_builtin (list)
+     WORD_LIST *list;
+{
+  int c, r, nflag, raw, ofd, sflag;
+  intmax_t lfd;
+  char **v, *pfmt, *arg;
+  WORD_LIST *l;
+
+  nflag = raw = sflag = 0;
+  ofd = 1;
+  pfmt = 0;
+
+  reset_internal_getopt ();
+  while ((c = internal_getopt (list, "Rnprsu:f:")) != -1)
+    {
+      switch (c)
+	{
+	case 'R':
+	  raw = 2;
+	  loptend = lcurrent;
+	  if (loptend && ISOPTION (loptend->word->word, 'n'))
+	    {
+	      loptend = loptend->next;
+	      nflag = 1;
+	    }
+	  goto opt_end;
+	case 'r':
+	  raw = 1;
+	  break;
+	case 'n':
+	  nflag = 1;
+	  break;
+	case 's':
+	  sflag = 1;
+	  break;
+	case 'p':
+	  break;	/* NOP */
+	case 'u':
+	  if (all_digits (list_optarg) && legal_number (list_optarg, &lfd) && lfd == (int)lfd)
+	    ofd = lfd;
+	  else
+	    {
+	      for (l = list; l->next && l->next != lcurrent; l = l->next);
+	      lcurrent = loptend = l;
+	      goto opt_end;
+	    }
+	  break;
+	case 'f':
+	  pfmt = list_optarg;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+
+opt_end:
+  list = loptend;
+
+  ofp = (ofd == 1) ? stdout : fdopen (dup (ofd), "w");
+
+  if (pfmt)
+    {
+      WORD_DESC *w;
+      WORD_LIST *nlist;
+
+      w = make_word (pfmt);
+      nlist = make_word_list (w, list);
+      r = printf_builtin (nlist);
+      nlist->next = (WORD_LIST *)NULL;
+      dispose_words (nlist);
+      return (r);
+    }
+
+  if (raw)
+    {
+      for (l = list; l; l = l->next)
+	{
+	  fprintf (ofp, "%s", l->word->word);
+	  if (l->next)
+	    fprintf (ofp, " ");
+	}
+      if (nflag == 0)
+	fprintf (ofp, "\n");
+      fflush (ofp);
+      return (0);	
+    }
+        
+  r = printargs (list, ofp);
+  if (r && nflag == 0)
+    fprintf (ofp, "\n");
+  if (ofd != 1)
+    fclose (ofp);
+  return 0;
+}
+
+static int
+printargs (list, ofp)
+     WORD_LIST *list;
+     FILE *ofp;
+{
+  WORD_LIST *l;
+  char *ostr;
+  int sawc;
+
+  for (sawc = 0, l = list; l; l = l->next)
+    {
+      ostr = ansicstr (l->word->word, strlen (l->word->word), 0, &sawc, (int *)0);
+      fprintf (ofp, "%s", ostr);
+      free (ostr);
+      if (sawc)
+        return (0);
+      if (l->next)
+        fprintf (ofp, " ");
+    }
+  return (1);
+}
diff --git a/examples/loadables/printenv.c b/examples/loadables/printenv.c
new file mode 100644
index 0000000..8c7f720
--- /dev/null
+++ b/examples/loadables/printenv.c
@@ -0,0 +1,94 @@
+/*
+ * printenv -- minimal builtin clone of BSD printenv(1).
+ *
+ * usage: printenv [varname]
+ *
+ */
+
+/*
+   Copyright (C) 1999-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+#include <stdio.h>
+
+#include "builtins.h"
+#include "shell.h"
+#include "bashgetopt.h"
+#include "common.h"
+
+extern char **export_env;
+
+int
+printenv_builtin (list) 
+     WORD_LIST *list;
+{
+  register char **envp;
+  int opt;
+  SHELL_VAR *var;
+
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "")) != -1)
+    {
+      switch (opt)
+	{
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+  /* printenv */
+  if (list == 0)
+    {
+      maybe_make_export_env ();		/* this allows minimal code */
+      for (envp = export_env; *envp; envp++)
+	printf ("%s\n", *envp);
+      return (EXECUTION_SUCCESS);
+    }
+
+  /* printenv varname */
+  var = find_variable (list->word->word);
+  if (var == 0 || (exported_p (var) == 0))
+    return (EXECUTION_FAILURE);
+
+  if (function_p (var))
+    print_var_function (var);
+  else
+    print_var_value (var, 0);
+
+  printf("\n");
+  return (EXECUTION_SUCCESS);
+}
+
+char *printenv_doc[] = {
+	"Display environment.",
+	"",
+	"Print names and values of environment variables",
+	(char *)NULL
+};
+
+struct builtin printenv_struct = {
+	"printenv",
+	printenv_builtin,
+	BUILTIN_ENABLED,
+	printenv_doc,
+	"printenv [varname]",
+	0
+};
diff --git a/examples/loadables/push.c b/examples/loadables/push.c
new file mode 100644
index 0000000..b27455b
--- /dev/null
+++ b/examples/loadables/push.c
@@ -0,0 +1,117 @@
+/*
+ * push - anyone remember TOPS-20?
+ *
+ */
+
+/*
+   Copyright (C) 1999-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+#include <stdio.h>
+#include <errno.h>
+
+#include "builtins.h"
+#include "shell.h"
+#include "jobs.h"
+#include "bashgetopt.h"
+#include "common.h"
+
+#ifndef errno
+extern int errno;
+#endif
+
+extern pid_t dollar_dollar_pid;
+extern int last_command_exit_value;
+
+int
+push_builtin (list)
+     WORD_LIST *list;
+{
+  pid_t pid;
+  int xstatus, opt;
+
+  xstatus = EXECUTION_SUCCESS;
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "")) != -1)
+    {
+      switch (opt)
+	{
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;  
+
+  pid = make_child (savestring ("push"), 0);
+  if (pid == -1)
+    {
+      builtin_error ("cannot fork: %s", strerror (errno));
+      return (EXECUTION_FAILURE);
+    }
+  else if (pid == 0)
+    {
+      /* Shell variable adjustments: $SHLVL, $$, $PPID, $! */
+      adjust_shell_level (1);
+      dollar_dollar_pid = getpid ();
+      set_ppid ();
+
+      /* Clean up job control stuff. */
+      stop_making_children ();
+      cleanup_the_pipeline ();
+      delete_all_jobs (0);
+
+      last_asynchronous_pid = NO_PID;
+
+      /* Make sure the job control code has the right values for
+	 the shell's process group and tty process group, and that
+	 the signals are set correctly for job control. */
+      initialize_job_control (0);
+      initialize_job_signals ();
+
+      /* And read commands until exit. */
+      reader_loop ();
+      exit_shell (last_command_exit_value);
+    }
+  else
+    {
+      stop_pipeline (0, (COMMAND *)NULL);
+      xstatus = wait_for (pid, 0);
+      return (xstatus);
+    }   
+}
+
+char *push_doc[] = {
+	"Create child shell.",
+	"",
+	"Create a child that is an exact duplicate of the running shell",
+	"and wait for it to exit.  The $SHLVL, $!, $$, and $PPID variables",
+	"are adjusted in the child.  The return value is the exit status",
+	"of the child.",
+	(char *)NULL
+};
+
+struct builtin push_struct = {
+	"push",
+	push_builtin,
+	BUILTIN_ENABLED,
+	push_doc,
+	"push",
+	0
+};
diff --git a/examples/loadables/realpath.c b/examples/loadables/realpath.c
new file mode 100644
index 0000000..0974ac4
--- /dev/null
+++ b/examples/loadables/realpath.c
@@ -0,0 +1,145 @@
+/*
+ * realpath -- canonicalize pathnames, resolving symlinks
+ *
+ * usage: realpath [-csv] pathname [pathname...]
+ *
+ * options:	-c	check whether or not each resolved path exists
+ *		-s	no output, exit status determines whether path is valid
+ *		-v	produce verbose output
+ *
+ *
+ * exit status:	0	if all pathnames resolved
+ *		1	if any of the pathname arguments could not be resolved
+ *
+ *
+ * Bash loadable builtin version
+ *
+ * Chet Ramey
+ * chet@po.cwru.edu
+ */
+
+/*
+   Copyright (C) 1999-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include <sys/types.h>
+#include <sys/stat.h>
+
+#include <stdio.h>
+#ifdef HAVE_UNISTD_H
+#  include <unistd.h>
+#endif
+#include "bashansi.h"
+#include <maxpath.h>
+#include <errno.h>
+
+#include "builtins.h"
+#include "shell.h"
+#include "bashgetopt.h"
+#include "common.h"
+
+#ifndef errno
+extern int	errno;
+#endif
+
+extern char	*sh_realpath();
+
+int
+realpath_builtin(list)
+WORD_LIST	*list;
+{
+	int	opt, cflag, vflag, sflag, es;
+	char	*r, realbuf[PATH_MAX], *p;
+	struct stat sb;
+
+	if (list == 0) {
+		builtin_usage();
+		return (EX_USAGE);
+	}
+
+	vflag = cflag = sflag = 0;
+	reset_internal_getopt();
+	while ((opt = internal_getopt (list, "csv")) != -1) {
+		switch (opt) {
+		case 'c':
+			cflag = 1;
+			break;
+		case 's':
+			sflag = 1;
+			break;
+		case 'v':
+			vflag = 1;
+			break;
+		CASE_HELPOPT;
+		default:
+			builtin_usage();
+			return (EX_USAGE);
+		}
+	}
+
+	list = loptend;
+
+	if (list == 0) {
+		builtin_usage();
+		return (EX_USAGE);
+	}
+
+	for (es = EXECUTION_SUCCESS; list; list = list->next) {
+		p = list->word->word;
+		r = sh_realpath(p, realbuf);
+		if (r == 0) {
+			es = EXECUTION_FAILURE;
+			if (sflag == 0)
+				builtin_error("%s: cannot resolve: %s", p, strerror(errno));
+			continue;
+		}
+		if (cflag && (stat(realbuf, &sb) < 0)) {
+			es = EXECUTION_FAILURE;
+			if (sflag == 0)
+				builtin_error("%s: %s", p, strerror(errno));
+			continue;
+		}
+		if (sflag == 0) {
+			if (vflag)
+				printf ("%s -> ", p);
+			printf("%s\n", realbuf);
+		}
+	}
+	return es;
+}
+
+char *realpath_doc[] = {
+	"Display pathname in canonical form.",
+	"",
+	"Display the canonicalized version of each PATHNAME argument, resolving",
+	"symbolic links.  The -c option checks whether or not each resolved name",
+	"exists.  The -s option produces no output; the exit status determines the",
+	"validity of each PATHNAME.  The -v option produces verbose output.  The",
+	"exit status is 0 if each PATHNAME was resolved; non-zero otherwise.",
+	(char *)NULL
+};
+
+struct builtin realpath_struct = {
+	"realpath",		/* builtin name */
+	realpath_builtin,	/* function implementing the builtin */
+	BUILTIN_ENABLED,	/* initial flags for builtin */
+	realpath_doc,		/* array of long documentation strings */
+	"realpath [-csv] pathname [pathname...]",	/* usage synopsis */
+	0			/* reserved for internal use */
+};
diff --git a/examples/loadables/rm.c b/examples/loadables/rm.c
new file mode 100644
index 0000000..0af5493
--- /dev/null
+++ b/examples/loadables/rm.c
@@ -0,0 +1,181 @@
+/* rm - remove files and directories with -r */
+
+/* See Makefile for compilation details. */
+
+/*
+   Copyright (C) 2016 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include <stdio.h>
+#include <errno.h>
+#include <dirent.h>
+#include "builtins.h"
+#include "shell.h"
+#include "common.h"
+#include "bashgetopt.h"
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+static int rm_file(const char *fname);
+
+static int force, recursive;
+
+static int
+_remove_directory(const char *dirname)
+{
+  DIR *dir;
+  struct dirent *dp;
+  size_t dirlen;
+  int err;
+
+  dirlen = strlen (dirname);
+  err = 0;
+
+  if ((dir = opendir(dirname)))
+    {
+      while ((dp = readdir(dir)))
+	{	
+#ifdef __GNUC__
+	  char fname[dirlen + 1 + strlen (dp->d_name) + 1];
+#else
+	  char *fname;
+	  int fnsize;
+#endif
+	  
+          if (*dp->d_name == '.' && (dp->d_name[1] == 0 || (dp->d_name[1] == '.' && dp->d_name[2] == 0)))
+            continue;
+
+#ifdef __GNUC__
+	  snprintf(fname, sizeof (fname), "%s/%s", dirname, dp->d_name);
+#else
+	  fnsize = dirlen + 1 + strlen (dp->d_name) + 1;
+          fname = xmalloc (fnsize);
+	  snprintf(fname, fnsize, "%s/%s", dirname, dp->d_name);
+#endif
+
+           if (rm_file (fname) && force == 0)
+             err = 1;
+#ifndef __GNUC__
+           free (fname);
+#endif
+        }
+
+      closedir(dir);
+		
+      if (err == 0 && rmdir (dirname) && force == 0)
+        err = 1;
+    }
+  else if (force == 0)
+    err = 1;
+
+  if (err)
+    builtin_error ("%s: %s", dirname, strerror (errno));
+
+  return err;
+}
+
+static int
+rm_file(const char *fname)
+{
+  if (unlink (fname) == 0)
+    return 0;
+
+  /* If FNAME is a directory glibc returns EISDIR but correct POSIX value
+     would be EPERM.  If we get that error and FNAME is a directory and -r
+     was supplied, recursively remove the directory and its contents */
+  if ((errno == EISDIR || errno == EPERM) && recursive && file_isdir (fname))
+    return _remove_directory(fname);
+  else if (force)
+    return 0;
+
+  builtin_error ("%s: %s", fname, strerror (errno));
+  return 1;
+}
+
+int
+rm_builtin (list)
+     WORD_LIST *list;
+{
+  const char *name;
+  WORD_LIST *l;
+  int rval, opt;
+
+  recursive = force = 0;
+  rval = EXECUTION_SUCCESS;
+
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "Rrfi")) != -1)
+    {
+      switch (opt)
+	{
+	case 'R':
+	case 'r':
+	  recursive = 1;
+	  break;
+	case 'f':
+	  force = 1;
+	  break;
+	case 'i':
+	  return (EX_DISKFALLBACK);
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+  if (list == 0)
+    {
+      if (force == 0)
+	{
+          builtin_usage ();
+          return (EXECUTION_FAILURE);
+	}
+      return (EXECUTION_SUCCESS);      
+    }
+
+  for (l = list; l; l = l->next)
+    {
+      if (rm_file(l->word->word) && force == 0)
+	rval = EXECUTION_FAILURE;
+    }
+
+  return rval;
+}
+
+char *rm_doc[] = {
+	"Remove files.",
+	"",
+	"rm removes the files specified as arguments.",
+	(char *)NULL
+};
+
+/* The standard structure describing a builtin command.  bash keeps an array
+   of these structures. */
+struct builtin rm_struct = {
+	"rm",			/* builtin name */
+	rm_builtin,		/* function implementing the builtin */
+	BUILTIN_ENABLED,	/* initial flags for builtin */
+	rm_doc,			/* array of long documentation strings. */
+	"rm [-rf] file ...",	/* usage synopsis; becomes short_doc */
+	0			/* reserved for internal use */
+};
diff --git a/examples/loadables/rmdir.c b/examples/loadables/rmdir.c
new file mode 100644
index 0000000..001c2bd
--- /dev/null
+++ b/examples/loadables/rmdir.c
@@ -0,0 +1,72 @@
+/* rmdir - remove directory */
+
+/* See Makefile for compilation details. */
+
+/*
+   Copyright (C) 1999-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include <stdio.h>
+#include <errno.h>
+#include "builtins.h"
+#include "shell.h"
+#include "common.h"
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+int
+rmdir_builtin (list)
+     WORD_LIST *list;
+{
+  int rval;
+  WORD_LIST *l;
+
+  if (no_options (list))
+    return (EX_USAGE);
+
+  for (rval = EXECUTION_SUCCESS, l = list; l; l = l->next)
+    if (rmdir (l->word->word) < 0)
+      {
+	builtin_error ("%s: %s", l->word->word, strerror (errno));
+	rval = EXECUTION_FAILURE;
+      }
+
+  return rval;
+}
+
+char *rmdir_doc[] = {
+	"Remove directory.",
+	"",
+	"rmdir removes the directory entry specified by each argument,",
+	"provided the directory is empty.",
+	(char *)NULL
+};
+
+/* The standard structure describing a builtin command.  bash keeps an array
+   of these structures. */
+struct builtin rmdir_struct = {
+	"rmdir",		/* builtin name */
+	rmdir_builtin,		/* function implementing the builtin */
+	BUILTIN_ENABLED,	/* initial flags for builtin */
+	rmdir_doc,		/* array of long documentation strings. */
+	"rmdir directory ...",	/* usage synopsis; becomes short_doc */
+	0			/* reserved for internal use */
+};
diff --git a/examples/loadables/seq.c b/examples/loadables/seq.c
new file mode 100644
index 0000000..e562407
--- /dev/null
+++ b/examples/loadables/seq.c
@@ -0,0 +1,490 @@
+/* seq - print sequence of numbers to standard output.
+   Copyright (C) 2018-2020 Free Software Foundation, Inc.
+
+   This program is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <https://www.gnu.org/licenses/>.  */
+
+/* Written as bash builtin by Chet Ramey. Portions from seq.c by Ulrich Drepper. */
+
+#include <config.h>
+
+#include <sys/types.h>
+
+#ifdef HAVE_UNISTD_H
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+
+#include "bashansi.h"
+#include "loadables.h"
+#include "bashintl.h"
+
+#ifndef errno
+extern int errno;
+#endif
+
+#if defined (HAVE_LONG_DOUBLE) && HAVE_DECL_STRTOLD && !defined(STRTOLD_BROKEN)
+typedef long double floatmax_t;
+#  define FLOATMAX_CONV "L"
+#  define strtofltmax   strtold
+#  define FLOATMAX_FMT "%Lg"
+#  define FLOATMAX_WFMT "%0.Lf"
+#  define USE_LONG_DOUBLE
+#else
+typedef double floatmax_t;
+#  define FLOATMAX_CONV ""
+#  define strtofltmax   strtod
+#  define FLOATMAX_FMT "%g"
+#  define FLOATMAX_WFMT "%0.f"
+#endif
+static floatmax_t getfloatmax PARAMS((const char *));
+static char *genformat PARAMS((floatmax_t, floatmax_t, floatmax_t));
+
+#define MAX(a, b) (((a) < (b))? (b) : (a))
+
+static int conversion_error = 0;
+
+/* If true print all number with equal width.  */
+static int equal_width;
+
+/* The string used to separate two numbers.  */
+static char const *separator;
+
+/* The string output after all numbers have been output. */
+static char const terminator[] = "\n";
+
+static char decimal_point;
+
+/* Pretty much the same as the version in builtins/printf.def */
+static floatmax_t
+getfloatmax (arg)
+     const char *arg;
+{
+  floatmax_t ret;
+  char *ep;
+
+  errno = 0;
+  ret = strtofltmax (arg, &ep);
+
+  if (*ep)
+    {
+      sh_invalidnum ((char *)arg);
+      conversion_error = 1;
+    }
+  else if (errno == ERANGE)
+    {
+      builtin_error ("warning: %s: %s", arg, strerror(ERANGE));
+      conversion_error = 1;
+    }
+
+  if (ret == -0.0)
+    ret = 0.0;
+
+  return (ret);
+}
+
+/* If FORMAT is a valid printf format for a double argument, return
+   its long double equivalent, allocated from dynamic storage. This
+   was written by Ulrich Drepper, taken from coreutils:seq.c */
+static char *
+long_double_format (char const *fmt)
+{
+  size_t i;
+  size_t length_modifier_offset;
+  int has_L;
+
+  for (i = 0; ! (fmt[i] == '%' && fmt[i + 1] != '%'); i += (fmt[i] == '%') + 1)
+    {
+      if (!fmt[i])
+	{
+	  builtin_error ("format %s has no %% directive", fmt);
+	  return 0;
+	}
+    }
+
+  i++;
+  i += strspn (fmt + i, "-+#0 '");	/* zero or more flags */
+  i += strspn (fmt + i, "0123456789");	/* optional minimum field width */
+  if (fmt[i] == '.')			/* optional precision */
+    {
+      i++;
+      i += strspn (fmt + i, "0123456789");
+    }
+
+  length_modifier_offset = i;		/* optional length modifier */
+  /* we could ignore an 'l' length modifier here */
+  has_L = (fmt[i] == 'L');
+  i += has_L;
+  switch (fmt[i])
+    {
+    case '\0':
+      builtin_error ("format %s ends in %%", fmt);
+      return 0;
+    case 'A':
+    case 'a':
+    case 'e':
+    case 'E':
+    case 'f':
+    case 'F':
+    case 'g':
+    case 'G':
+      break;
+    default:
+      builtin_error ("format %s has unknown `%%%c' directive", fmt, fmt[i]);
+      return 0;
+    }
+  for (i++; ; i += (fmt[i] == '%') + 1)
+    if (fmt[i] == '%' && fmt[i + 1] != '%')
+      {
+        builtin_error ("format %s has too many %% directives", fmt);
+        return 0;
+      }
+    else if (fmt[i] == 0)
+      {
+        size_t format_size = i + 1;
+        char *ldfmt = xmalloc (format_size + 1);
+        memcpy (ldfmt, fmt, length_modifier_offset);
+#ifdef USE_LONG_DOUBLE
+        ldfmt[length_modifier_offset] = 'L';
+        strcpy (ldfmt + length_modifier_offset + 1,
+                fmt + length_modifier_offset + has_L);
+#else
+        strcpy (ldfmt + length_modifier_offset, fmt + length_modifier_offset);
+#endif
+        return ldfmt;
+      }
+}
+
+/* Return the number of digits following the decimal point in NUMBUF */
+static int
+getprec (numbuf)
+     const char *numbuf;
+{
+  int p;
+  char *dp;
+
+  if (dp = strchr (numbuf, decimal_point))
+    dp++;		/* skip over decimal point */
+  for (p = 0; dp && *dp && ISDIGIT (*dp); dp++)
+    p++;
+  return p;
+}
+
+/* Return the default format given FIRST, INCR, and LAST.  */
+static char *
+genformat (first, incr, last)
+       floatmax_t first, incr, last;
+{
+  static char buf[6 + 2 * INT_STRLEN_BOUND (int)];
+  int wfirst, wlast, width;
+  int iprec, fprec, lprec, prec;
+
+  if (equal_width == 0)
+    return (FLOATMAX_FMT);
+
+  /* OK, we have to figure out the largest number of decimal places. This is
+     a little more expensive than using the original strings. */
+  snprintf (buf, sizeof (buf), FLOATMAX_FMT, incr);
+  iprec = getprec (buf);
+
+  wfirst = snprintf (buf, sizeof (buf), FLOATMAX_FMT, first);
+  fprec = getprec (buf);
+    
+  prec = MAX (fprec, iprec);
+
+  wlast = snprintf (buf, sizeof (buf), FLOATMAX_FMT, last);
+  lprec = getprec (buf);
+
+  /* increase first width by any increased precision in increment */
+  wfirst += (prec - fprec);
+
+  /* adjust last width to use precision from first/incr */
+  wlast += (prec - lprec);
+
+  if (lprec && prec == 0)
+    wlast--;		/* no decimal point */
+  if (lprec == 0 && prec)
+    wlast++;		/* include decimal point */
+  if (fprec == 0 && prec)
+    wfirst++;		/* include decimal point */
+
+  width = MAX (wfirst, wlast);
+  if (width)
+    sprintf (buf, "%%0%d.%d%sf", width, prec, FLOATMAX_CONV);
+  else
+    sprintf (buf, "%%.%d%sf", prec, FLOATMAX_CONV);
+
+  return buf;
+}
+
+int
+print_fltseq (fmt, first, last, incr)
+     const char *fmt;
+     floatmax_t first, last, incr;
+{
+  int n;
+  floatmax_t next;
+  const char *s;
+
+  n = 0;		/* iteration counter */
+  s = "";
+  for (next = first; incr >= 0 ? (next <= last) : (next >= last); next = first + n * incr)
+    {
+      QUIT;
+      if (*s && fputs (s, stdout) == EOF)
+	return (sh_chkwrite (EXECUTION_FAILURE));
+      if (printf (fmt, next) < 0)
+	return (sh_chkwrite (EXECUTION_FAILURE));
+      s = separator;
+      n++;
+    }
+
+  if (n > 0 && fputs (terminator, stdout) == EOF)
+    return (sh_chkwrite (EXECUTION_FAILURE));
+  return (sh_chkwrite (EXECUTION_SUCCESS));
+}
+
+/* must be <= INT_STRLEN_BOUND(intmax_t) */
+int
+width_needed (num)
+     intmax_t num;
+{
+  int ret;
+
+  ret = num < 0;		/* sign */
+  if (ret)
+    num = -num;
+  do
+    ret++;
+  while (num /= 10);
+  return ret;
+}
+
+int
+print_intseq (ifirst, ilast, iincr)
+     intmax_t ifirst, ilast, iincr;
+{
+  char intwfmt[6 + INT_STRLEN_BOUND(int) + sizeof (PRIdMAX)];
+  const char *s;
+  intmax_t i, next;
+
+  /* compute integer format string */
+  if (equal_width)	/* -w supplied */
+    {
+      int wfirst, wlast, width;
+
+      wfirst = width_needed (ifirst);
+      wlast = width_needed (ilast);
+      width = MAX(wfirst, wlast);
+
+      /* The leading %s is for the separator */
+      snprintf (intwfmt, sizeof (intwfmt), "%%s%%0%u" PRIdMAX, width);
+    }
+
+  /* We could use braces.c:mkseq here but that allocates lots of memory */
+  s = "";
+  for (i = ifirst; (ifirst <= ilast) ? (i <= ilast) : (i >= ilast); i = next)
+    {
+      QUIT;
+      /* The leading %s is for the separator */
+      if (printf (equal_width ?  intwfmt : "%s%" PRIdMAX, s, i) < 0)
+	return (sh_chkwrite (EXECUTION_FAILURE));
+      s = separator;
+      next = i + iincr;
+    }
+
+  if (fputs (terminator, stdout) == EOF)
+    return (sh_chkwrite (EXECUTION_FAILURE));
+  return (sh_chkwrite (EXECUTION_SUCCESS));
+}
+
+int
+seq_builtin (list)
+     WORD_LIST *list;
+{
+  floatmax_t first, last, incr;
+  intmax_t ifirst, ilast, iincr;
+  WORD_LIST *l;
+  int opt, nargs, intseq, freefmt;
+  char *first_str, *incr_str, *last_str;
+  char const *fmtstr;		/* The printf(3) format used for output.  */
+
+  equal_width = 0;
+  separator = "\n";
+  fmtstr = NULL;
+
+  first = 1.0;
+  last = 0.0;
+  incr = 0.0;		/* set later */
+  ifirst = ilast = iincr = 0;
+  first_str = incr_str = last_str = 0;
+
+  intseq = freefmt = 0;
+  opt = 0;
+
+  reset_internal_getopt ();
+  while (opt != -1)
+    {
+      l = lcurrent ? lcurrent : list;
+      if (l && l->word && l->word->word && l->word->word[0] == '-' &&
+	   (l->word->word[1] == '.' || DIGIT (l->word->word[1])))
+	{
+	  loptend = l;
+	  break;	/* negative number */
+	}
+      if ((opt = internal_getopt (list, "f:s:w")) == -1)
+        break;
+
+      switch (opt)
+	{
+	case 'f':
+	  fmtstr = list_optarg;
+	  break;
+	case 's':
+	  separator = list_optarg;
+	  break;
+	case 'w':
+	  equal_width = 1;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+  if (list == 0)
+    {
+      builtin_usage ();
+      return (EXECUTION_FAILURE);
+    }
+
+  for (nargs = 1, l = list; l->next; l = l->next)
+    nargs++;
+  if (nargs > 3)
+    {
+      builtin_usage ();
+      return (EXECUTION_FAILURE);
+    }
+
+  /* LAST */
+  conversion_error = 0;
+  last = getfloatmax (last_str = l->word->word);
+  if (conversion_error)
+    return (EXECUTION_FAILURE);
+
+  /* FIRST LAST */
+  if (nargs > 1)
+    {
+      conversion_error = 0;
+      first = getfloatmax (first_str = list->word->word);
+      if (conversion_error)
+	return (EXECUTION_FAILURE);
+    }
+
+  /* FIRST INCR LAST */
+  if (nargs > 2)
+    {
+      conversion_error = 0;
+      incr = getfloatmax (incr_str = list->next->word->word);
+      if (conversion_error)
+	return (EXECUTION_FAILURE);
+      if (incr == 0.0)
+	{
+	  builtin_error ("zero %screment", (first < last) ?  "in" : "de");
+	  return (EXECUTION_FAILURE);
+	}
+    }
+
+  /* Sanitize arguments */
+  if (incr == 0.0)
+    incr = (first <= last) ?  1.0 : -1.0;
+  if ((incr < 0.0 && first < last) || (incr > 0 && first > last))
+    {
+      builtin_error ("incorrect %screment", (first < last) ?  "in" : "de");
+      return (EXECUTION_FAILURE);
+    }
+
+  /* validate format here */
+  if (fmtstr)
+    {
+      fmtstr = long_double_format (fmtstr);
+      freefmt = 1;
+      if (fmtstr == 0)
+	return (EXECUTION_FAILURE);
+    }
+      
+  if (fmtstr != NULL && equal_width)
+    {
+      builtin_warning ("-w ignored when the format string is specified");
+      equal_width = 0;
+    }
+
+  /* Placeholder for later additional conditions */
+  if (last_str && all_digits (last_str) &&
+      (first_str == 0 || all_digits (first_str)) &&
+      (incr_str == 0 || all_digits (incr_str)) &&
+      fmtstr == NULL)
+    intseq = 1;
+
+  if (intseq)
+    {
+      ifirst = (intmax_t)first; /* truncation */
+      ilast = (intmax_t)last;
+      iincr = (intmax_t)incr;
+
+      return (print_intseq (ifirst, ilast, iincr));
+    }
+
+  decimal_point = locale_decpoint ();
+  if (fmtstr == NULL)
+    fmtstr = genformat (first, incr, last);
+
+  print_fltseq (fmtstr, first, last, incr);
+
+  if (freefmt)
+    free ((void *)fmtstr);
+  return sh_chkwrite (EXECUTION_SUCCESS);
+}
+
+/* Taken largely from GNU seq. */
+char *seq_doc[] = {
+	"Print numbers from FIRST to LAST, in steps of INCREMENT.",
+	"",
+	"-f FORMAT    use printf style floating-point FORMAT",
+	"-s STRING    use STRING to separate numbers (default: \\n)",
+	"-w           equalize width by padding with leading zeroes",
+	"",
+	"If FIRST or INCREMENT is omitted, it defaults to 1.  However, an",
+	"omitted INCREMENT defaults to -1 when LAST is smaller than FIRST.",
+	"The sequence of numbers ends when the sum of the current number and",
+	"INCREMENT would become greater than LAST.",
+	"FIRST, INCREMENT, and LAST are interpreted as floating point values.",
+	"",
+	"FORMAT must be suitable for printing one argument of type 'double';",
+	"it defaults to %.PRECf if FIRST, INCREMENT, and LAST are all fixed point",
+	"decimal numbers with maximum precision PREC, and to %g otherwise.",
+	(char *)NULL
+};	
+
+struct builtin seq_struct = {
+	"seq",
+	seq_builtin,
+	BUILTIN_ENABLED,
+	seq_doc,
+	"seq [-f format] [-s separator] [-w] [FIRST [INCR]] LAST",
+	0
+};
diff --git a/examples/loadables/setpgid.c b/examples/loadables/setpgid.c
new file mode 100644
index 0000000..e56fd51
--- /dev/null
+++ b/examples/loadables/setpgid.c
@@ -0,0 +1,121 @@
+/* setpgid.c: bash loadable wrapper for setpgid system call
+
+   An example of how to wrap a system call with a loadable builtin.
+
+   Originally contributed by Jason Vas Dias <jason.vas.dias@gmail.com>
+   
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+#include <errno.h>
+#include <string.h>
+
+#include "bashtypes.h"
+#include "posixtime.h"
+
+#include <stdio.h>
+
+#include "builtins.h"
+#include "shell.h"
+#include "common.h"
+
+#include "bashgetopt.h"
+
+#if !defined (_POSIX_VERSION)
+#  define setpgid(pid, pgrp)      setpgrp (pid, pgrp)
+#endif
+
+int
+setpgid_builtin (list)
+      WORD_LIST *list;
+{
+  register WORD_LIST *wl;
+  intmax_t pid_arg, pgid_arg;
+  pid_t pid, pgid;
+  char *pidstr, *pgidstr;
+
+  wl = list;
+  pid = pgid = 0;
+
+  if (wl == 0 || wl->next == 0)
+    {
+      builtin_usage ();
+      return (EX_USAGE);
+    }
+
+  pidstr = wl->word ? wl->word->word : 0;
+  pgidstr = wl->next->word ? wl->next->word->word : 0;
+
+  if (pidstr == 0 || pgidstr == 0)
+    {
+      builtin_usage ();
+      return (EX_USAGE);
+    }
+      
+  if (legal_number (pidstr, &pid_arg) == 0)
+    {
+      builtin_error ("%s: pid argument must be numeric", pidstr);
+      return (EXECUTION_FAILURE);
+    }
+  if (pid_arg < 0)
+    {
+      builtin_error("%s: negative pid  values not allowed", pidstr);
+      return (EXECUTION_FAILURE);
+    }
+  pid = pid_arg;
+
+  if (legal_number (pgidstr, &pgid_arg) == 0)
+    {
+      builtin_error ("%s: pgrp argument must be numeric", pgidstr);
+      return (EXECUTION_FAILURE);
+    }
+  if (pgid_arg < 0)
+    {
+      builtin_error ("%s: negative pgrp values not allowed", pgidstr);
+      return (EXECUTION_FAILURE);
+    }
+  pgid = pgid_arg;
+
+  errno = 0;
+  if (setpgid(pid, pgid) < 0)
+    {
+      builtin_error("setpgid failed: %s", strerror (errno));
+      return (EXECUTION_FAILURE);     
+    }
+  return (EXECUTION_SUCCESS);     
+}
+
+const char *setpgid_doc[] = {
+	"invoke the setpgid(2) system call",
+	"",
+	"Arguments:",
+	"   pid : numeric process identifier, >= 0",
+	"   pgrpid: numeric process group identifier, >=0",
+	"See the setpgid(2) manual page.",
+	(const char *)NULL
+};
+
+struct builtin setpgid_struct = {
+	"setpgid",
+	setpgid_builtin,
+	BUILTIN_ENABLED,
+	(char **)setpgid_doc,
+	"setpgid pid pgrpid",
+	0
+};
diff --git a/examples/loadables/sleep.c b/examples/loadables/sleep.c
new file mode 100644
index 0000000..fc2203d
--- /dev/null
+++ b/examples/loadables/sleep.c
@@ -0,0 +1,101 @@
+/*
+ * sleep -- sleep for fractions of a second
+ *
+ * usage: sleep seconds[.fraction]
+ */
+
+/*
+   Copyright (C) 1999-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include "bashtypes.h"
+
+#if defined (TIME_WITH_SYS_TIME)
+#  include <sys/time.h>
+#  include <time.h>
+#else
+#  if defined (HAVE_SYS_TIME_H)
+#    include <sys/time.h>
+#  else
+#    include <time.h>
+#  endif
+#endif
+
+#if defined (HAVE_UNISTD_H)
+#include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include "chartypes.h"
+
+#include "shell.h"
+#include "builtins.h"
+#include "common.h"
+
+int
+sleep_builtin (list)
+WORD_LIST	*list;
+{
+	long	sec, usec;
+	char	*ep;
+	int	r, mul;
+	time_t	t;
+
+	if (list == 0) {
+		builtin_usage();
+		return(EX_USAGE);
+	}
+
+	/* Skip over `--' */
+	if (list->word && ISOPTION (list->word->word, '-'))
+		list = list->next;
+
+	if (*list->word->word == '-' || list->next) {
+		builtin_usage ();
+		return (EX_USAGE);
+	}
+
+    	r = uconvert(list->word->word, &sec, &usec, &ep);
+	/* Maybe postprocess conversion failures here based on EP */
+    		
+    	if (r) {
+		fsleep(sec, usec);
+		QUIT;
+		return(EXECUTION_SUCCESS);
+    	}
+
+	builtin_error("%s: bad sleep interval", list->word->word);
+	return (EXECUTION_FAILURE);
+}
+
+static char *sleep_doc[] = {
+	"Suspend execution for specified period.",
+	""
+	"sleep suspends execution for a minimum of SECONDS[.FRACTION] seconds.",
+	(char *)NULL
+};
+
+struct builtin sleep_struct = {
+	"sleep",
+	sleep_builtin,
+	BUILTIN_ENABLED,
+	sleep_doc,
+	"sleep seconds[.fraction]",
+	0
+};
diff --git a/examples/loadables/stat.c b/examples/loadables/stat.c
new file mode 100644
index 0000000..52b9580
--- /dev/null
+++ b/examples/loadables/stat.c
@@ -0,0 +1,430 @@
+/* stat - load up an associative array with stat information about a file */
+
+/* See Makefile for compilation details. */
+
+/*
+   Copyright (C) 2016 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+
+#include <sys/types.h>
+#include "posixstat.h"
+#include <stdio.h>
+#include <pwd.h>
+#include <grp.h>
+#include <errno.h>
+#include "posixtime.h"
+
+#include "bashansi.h"
+#include "shell.h"
+#include "builtins.h"
+#include "common.h"
+#include "bashgetopt.h"
+
+#ifndef errno
+extern int	errno;
+#endif
+
+#define ST_NAME		0
+#define ST_DEV		1
+#define ST_INO		2
+#define ST_MODE		3
+#define ST_NLINK	4
+#define ST_UID		5
+#define ST_GID		6
+#define ST_RDEV		7
+#define ST_SIZE		8
+#define ST_ATIME	9
+#define ST_MTIME	10
+#define ST_CTIME	11
+#define ST_BLKSIZE	12
+#define ST_BLOCKS	13
+#define ST_CHASELINK	14
+#define ST_PERMS	15
+
+#define ST_END		16
+
+static char *arraysubs[] =
+  {
+    "name", "device", "inode", "type", "nlink", "uid", "gid", "rdev",
+    "size", "atime", "mtime", "ctime", "blksize", "blocks", "link", "perms",
+    0
+  };
+
+static int
+getstat (fname, flags, sp)
+     const char *fname;
+     int flags;
+     struct stat *sp;
+{
+  intmax_t lfd;
+  int fd, r;
+
+  if (strncmp (fname, "/dev/fd/", 8) == 0)
+    {
+      if ((legal_number(fname + 8, &lfd) == 0) || (int)lfd != lfd)
+	{
+	  errno = EINVAL;
+	  return -1;
+	}
+      fd = lfd;
+      r = fstat(fd, sp);
+    }
+#ifdef HAVE_LSTAT
+  else if (flags & 1)
+    r = lstat(fname, sp);
+#endif
+  else
+    r = stat(fname, sp);
+
+  return r;
+}
+
+static char *
+statlink (fname, sp)
+     char *fname;
+     struct stat *sp;
+{
+#if defined (HAVE_READLINK)
+  char linkbuf[PATH_MAX];
+  int n;
+
+  if (fname && S_ISLNK (sp->st_mode) && (n = readlink (fname, linkbuf, PATH_MAX)) > 0)
+    {
+      linkbuf[n] = '\0';
+      return (savestring (linkbuf));
+    }
+  else
+#endif
+    return (savestring (fname));
+}
+
+static char *
+octalperms (m)
+     int m;
+{
+  int operms;
+  char *ret;
+
+  operms = 0;
+
+  if (m & S_IRUSR)
+    operms |= 0400;
+  if (m & S_IWUSR)
+    operms |= 0200;
+  if (m & S_IXUSR)
+    operms |= 0100;
+
+  if (m & S_IRGRP)
+    operms |= 0040;
+  if (m & S_IWGRP)
+    operms |= 0020;
+  if (m & S_IXGRP)
+    operms |= 0010;
+
+  if (m & S_IROTH)
+    operms |= 0004;
+  if (m & S_IWOTH)
+    operms |= 0002;
+  if (m & S_IXOTH)
+    operms |= 0001;
+
+  if (m & S_ISUID)
+    operms |= 04000;
+  if (m & S_ISGID)
+    operms |= 02000;
+  if (m & S_ISVTX)
+    operms |= 01000;
+
+  ret = (char *)xmalloc (16);
+  snprintf (ret, 16, "%04o", operms);
+  return ret;
+}
+
+static char *
+statperms (m)
+     int m;
+{
+  char ubits[4], gbits[4], obits[4];	/* u=rwx,g=rwx,o=rwx */
+  int i;
+  char *ret;
+
+  i = 0;
+  if (m & S_IRUSR)
+    ubits[i++] = 'r';
+  if (m & S_IWUSR)
+    ubits[i++] = 'w';
+  if (m & S_IXUSR)
+    ubits[i++] = 'x';
+  ubits[i] = '\0';
+
+  i = 0;
+  if (m & S_IRGRP)
+    gbits[i++] = 'r';
+  if (m & S_IWGRP)
+    gbits[i++] = 'w';
+  if (m & S_IXGRP)
+    gbits[i++] = 'x';
+  gbits[i] = '\0';
+
+  i = 0;
+  if (m & S_IROTH)
+    obits[i++] = 'r';
+  if (m & S_IWOTH)
+    obits[i++] = 'w';
+  if (m & S_IXOTH)
+    obits[i++] = 'x';
+  obits[i] = '\0';
+
+  if (m & S_ISUID)
+    ubits[2] = (m & S_IXUSR) ? 's' : 'S';
+  if (m & S_ISGID)
+    gbits[2] = (m & S_IXGRP) ? 's' : 'S';
+  if (m & S_ISVTX)
+    obits[2] = (m & S_IXOTH) ? 't' : 'T';
+
+  ret = (char *)xmalloc (32);
+  snprintf (ret, 32, "u=%s,g=%s,o=%s", ubits, gbits, obits);
+  return ret;
+}
+
+static char *
+statmode(mode)
+     int mode;
+{
+  char *modestr, *m;
+
+  modestr = m = (char *)xmalloc (8);
+  if (S_ISBLK (mode))
+    *m++ = 'b';
+  if (S_ISCHR (mode))
+    *m++ = 'c';
+  if (S_ISDIR (mode))
+    *m++ = 'd';
+  if (S_ISREG(mode))
+    *m++ = '-';
+  if (S_ISFIFO(mode))
+    *m++ = 'p';
+  if (S_ISLNK(mode))
+    *m++ = 'l';
+  if (S_ISSOCK(mode))
+    *m++ = 's';
+
+#ifdef S_ISDOOR
+  if (S_ISDOOR (mode))
+    *m++ = 'D';
+#endif
+#ifdef S_ISWHT
+  if (S_ISWHT(mode))
+    *m++ = 'W';
+#endif
+#ifdef S_ISNWK
+  if (S_ISNWK(mode))
+    *m++ = 'n';
+#endif
+#ifdef S_ISMPC
+  if (S_ISMPC (mode))
+    *m++ = 'm';
+#endif
+
+  *m = '\0';
+  return (modestr);
+}
+
+static char *
+stattime (t)
+     time_t t;
+{
+  char *tbuf, *ret;
+  size_t tlen;
+
+  tbuf = ctime (&t);
+  tlen = strlen (tbuf);
+  ret = savestring (tbuf);
+  ret[tlen-1] = '\0';
+  return ret;
+}
+
+static char *
+statval (which, fname, flags, sp)
+     int which;
+     char *fname;
+     int flags;
+     struct stat *sp;
+{
+  int temp;
+
+  switch (which)
+    {
+    case ST_NAME:
+      return savestring (fname);
+    case ST_DEV:
+      return itos (sp->st_dev);
+    case ST_INO:
+      return itos (sp->st_ino);
+    case ST_MODE:
+      return (statmode (sp->st_mode));
+    case ST_NLINK:
+      return itos (sp->st_nlink);
+    case ST_UID:
+      return itos (sp->st_uid);
+    case ST_GID:
+      return itos (sp->st_gid);
+    case ST_RDEV:
+      return itos (sp->st_rdev);
+    case ST_SIZE:
+      return itos (sp->st_size);
+    case ST_ATIME:
+      return ((flags & 2) ? stattime (sp->st_atime) : itos (sp->st_atime));
+    case ST_MTIME:
+      return ((flags & 2) ? stattime (sp->st_mtime) : itos (sp->st_mtime));
+    case ST_CTIME:
+      return ((flags & 2) ? stattime (sp->st_ctime) : itos (sp->st_ctime));
+    case ST_BLKSIZE:
+      return itos (sp->st_blksize);
+    case ST_BLOCKS:
+      return itos (sp->st_blocks);
+    case ST_CHASELINK:
+      return (statlink (fname, sp));
+    case ST_PERMS:
+      temp = sp->st_mode & (S_IRWXU|S_IRWXG|S_IRWXO|S_ISUID|S_ISGID);
+      return (flags & 2) ? statperms (temp) : octalperms (temp);
+    default:
+      return savestring ("42");
+    }
+}
+
+static int
+loadstat (vname, var, fname, flags, sp)
+     char *vname;
+     SHELL_VAR *var;
+     char *fname;
+     int flags;
+     struct stat *sp;
+{
+  int i;
+  char *key, *value;
+  SHELL_VAR *v;
+
+  for (i = 0; arraysubs[i]; i++)
+    {
+      key = savestring (arraysubs[i]);
+      value = statval (i, fname, flags, sp);
+      v = bind_assoc_variable (var, vname, key, value, ASS_FORCE);
+    }
+  return 0;
+}
+
+int
+stat_builtin (list)
+     WORD_LIST *list;
+{
+  int opt, flags;
+  char *aname, *fname;
+  struct stat st;
+  SHELL_VAR *v;
+
+  aname = "STAT";
+  flags = 0;
+
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "A:Ll")) != -1)
+    {
+      switch (opt)
+	{
+	case 'A':
+	  aname = list_optarg;
+	  break;
+	case 'L':
+	  flags |= 1;		/* operate on links rather than resolving them */
+	  break;
+	case 'l':
+	  flags |= 2;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+
+  list = loptend;
+  if (list == 0)
+    {
+      builtin_usage ();
+      return (EX_USAGE);
+    }
+
+  fname = list->word->word;
+
+  if (getstat (fname, flags, &st) < 0)
+    {
+      builtin_error ("%s: cannot stat: %s", fname, strerror (errno));
+      return (EXECUTION_FAILURE);
+    }
+
+  unbind_variable (aname);
+  v = make_new_assoc_variable (aname);
+  if (v == 0)
+    {
+      builtin_error ("%s: cannot create variable", aname);
+      return (EXECUTION_FAILURE);
+    }
+  if (loadstat (aname, v, fname, flags, &st) < 0)
+    {
+      builtin_error ("%s: cannot assign file status information", aname);
+      unbind_variable (aname);
+      return (EXECUTION_FAILURE);
+    }
+
+  return (EXECUTION_SUCCESS);
+}
+
+/* An array of strings forming the `long' documentation for a builtin xxx,
+   which is printed by `help xxx'.  It must end with a NULL.  By convention,
+   the first line is a short description. */
+char *stat_doc[] = {
+	"Load an associative array with file status information.",
+	"",
+	"Take a filename and load the status information returned by a",
+	"stat(2) call on that file into the associative array specified",
+	"by the -A option.  The default array name is STAT.  If the -L",
+	"option is supplied, stat does not resolve symbolic links and",
+	"reports information about the link itself.  The -l option results",
+	"in longer-form listings for some of the fields. The exit status is 0",
+	"unless the stat fails or assigning the array is unsuccessful.",
+	(char *)NULL
+};
+
+/* The standard structure describing a builtin command.  bash keeps an array
+   of these structures.  The flags must include BUILTIN_ENABLED so the
+   builtin can be used. */
+struct builtin stat_struct = {
+	"stat",			/* builtin name */
+	stat_builtin,		/* function implementing the builtin */
+	BUILTIN_ENABLED,	/* initial flags for builtin */
+	stat_doc,		/* array of long documentation strings. */
+	"stat [-lL] [-A aname] file",	/* usage synopsis; becomes short_doc */
+	0			/* reserved for internal use */
+};
diff --git a/examples/loadables/strftime.c b/examples/loadables/strftime.c
new file mode 100644
index 0000000..f4e194e
--- /dev/null
+++ b/examples/loadables/strftime.c
@@ -0,0 +1,128 @@
+/* strftime - loadable builtin interface to strftime(3) */
+
+/* See Makefile for compilation details. */
+
+/*
+   Copyright (C) 1999-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "bashtypes.h"
+#include "posixtime.h"
+
+#include <stdio.h>
+
+#include "builtins.h"
+#include "shell.h"
+#include "common.h"
+#include "bashgetopt.h"
+
+int
+strftime_builtin (list)
+     WORD_LIST *list;
+{
+  char *format, *tbuf;
+  size_t tbsize, tsize;
+  time_t secs;
+  struct tm *t;
+  int n;
+  intmax_t i;
+
+  if (no_options (list))
+    return (EX_USAGE);
+  list = loptend;
+
+  if (list == 0)
+    {
+      builtin_usage ();
+      return (EX_USAGE);
+    }
+
+  format = list->word->word;
+  if (format == 0 || *format == 0)
+    {
+      printf ("\n");
+      return (EXECUTION_SUCCESS);
+    }
+
+  list = list->next;
+
+  if (list && list->word->word)
+    {
+      n = legal_number (list->word->word, &i);
+      if (n == 0 || i < 0 || i != (time_t)i)
+	{
+	  sh_invalidnum (list->word->word);
+	  return (EXECUTION_FAILURE);
+	}
+      else
+        secs = i;
+    }
+  else
+    secs = NOW;
+
+  t = localtime (&secs);
+
+  tbsize = strlen (format) * 4;
+  tbuf = 0;
+
+  /* Now try to figure out how big the buffer should really be.  strftime(3)
+     will return the number of bytes placed in the buffer unless it's greater
+     than MAXSIZE, in which case it returns 0. */
+  for (n = 1; n <= 8; n++)
+    {
+      tbuf = xrealloc (tbuf, tbsize * n);
+      tsize = strftime (tbuf, tbsize * n, format, t);
+      if (tsize)
+        break;
+    }
+
+  if (tsize)
+    printf ("%s\n", tbuf);
+  free (tbuf);
+
+  return (EXECUTION_SUCCESS);
+}
+
+/* An array of strings forming the `long' documentation for a builtin xxx,
+   which is printed by `help xxx'.  It must end with a NULL. */
+char *strftime_doc[] = {
+	"Display formatted time.",
+	"",
+	"Converts date and time format to a string and displays it on the",
+	"standard output.  If the optional second argument is supplied, it",
+	"is used as the number of seconds since the epoch to use in the",
+	"conversion, otherwise the current time is used.",
+	(char *)NULL
+};
+
+/* The standard structure describing a builtin command.  bash keeps an array
+   of these structures.  The flags must include BUILTIN_ENABLED so the
+   builtin can be used. */
+struct builtin strftime_struct = {
+	"strftime",		/* builtin name */
+	strftime_builtin,	/* function implementing the builtin */
+	BUILTIN_ENABLED,	/* initial flags for builtin */
+	strftime_doc,		/* array of long documentation strings. */
+	"strftime format [seconds]",	/* usage synopsis; becomes short_doc */
+	0			/* reserved for internal use */
+};
diff --git a/examples/loadables/sync.c b/examples/loadables/sync.c
new file mode 100644
index 0000000..4fbeee1
--- /dev/null
+++ b/examples/loadables/sync.c
@@ -0,0 +1,53 @@
+/* sync - sync the disks by forcing pending filesystem writes to complete */
+
+/*
+   Copyright (C) 1999-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+
+#include "builtins.h"
+#include "shell.h"
+#include "bashgetopt.h"
+
+int
+sync_builtin (list)
+     WORD_LIST *list;
+{
+  sync();
+  return (EXECUTION_SUCCESS);
+}
+
+char *sync_doc[] = {
+	"Sync disks.",
+	""
+	"Force completion of pending disk writes",
+	(char *)NULL
+};
+
+struct builtin sync_struct = {
+	"sync",			/* builtin name */
+	sync_builtin,		/* function implementing the builtin */
+	BUILTIN_ENABLED,	/* initial flags for builtin */
+	sync_doc,		/* array of long documentation strings. */
+	"sync",			/* usage synopsis; becomes short_doc */
+	0			/* reserved for internal use */
+};
diff --git a/examples/loadables/tee.c b/examples/loadables/tee.c
new file mode 100644
index 0000000..283f23f
--- /dev/null
+++ b/examples/loadables/tee.c
@@ -0,0 +1,180 @@
+/* tee - duplicate standard input */
+
+/* See Makefile for compilation details. */
+
+/*
+   Copyright (C) 1999-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include "bashtypes.h"
+#include "posixstat.h"
+#include "filecntl.h"
+
+#include <signal.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "bashansi.h"
+
+#include <stdio.h>
+#include <errno.h>
+
+#include "builtins.h"
+#include "shell.h"
+#include "bashgetopt.h"
+#include "common.h"
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+typedef struct flist {
+  struct flist *next;
+  int fd;
+  char *fname;
+} FLIST;
+
+static FLIST *tee_flist;
+
+#define TEE_BUFSIZE	8192
+
+extern int interrupt_immediately;
+
+extern char *strerror ();
+
+int
+tee_builtin (list)
+     WORD_LIST *list;
+{
+  int opt, append, nointr, rval, fd, fflags;
+  int n, nr, nw;
+  FLIST *fl;
+  char *buf, *bp;
+
+  char *t;
+
+  reset_internal_getopt ();
+  append = nointr = 0;
+  tee_flist = (FLIST *)NULL;
+  while ((opt = internal_getopt (list, "ai")) != -1)
+    {
+      switch (opt)
+	{
+	case 'a':
+	  append = 1;
+	  break;
+	case 'i':
+	  nointr = 1;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+  if (nointr == 0)
+    interrupt_immediately++;
+
+  buf = xmalloc (TEE_BUFSIZE);
+
+  /* Initialize output file list. */
+  fl = tee_flist = (FLIST *)xmalloc (sizeof(FLIST));
+  tee_flist->fd = 1;
+  tee_flist->fname = "stdout";
+  tee_flist->next = (FLIST *)NULL;
+
+  /* Add file arguments to list of output files. */
+  fflags = append ? O_WRONLY|O_CREAT|O_APPEND : O_WRONLY|O_CREAT|O_TRUNC;
+  for (rval = EXECUTION_SUCCESS; list; list = list->next)
+    {
+      fd = open (list->word->word, fflags, 0666);
+      if (fd < 0)
+        {
+          builtin_error ("%s: cannot open: %s", list->word->word, strerror (errno));
+          rval = EXECUTION_FAILURE;
+        }
+      else
+        {
+          fl->next = (FLIST *)xmalloc (sizeof(FLIST));
+          fl->next->fd = fd;
+          fl->next->fname = list->word->word;
+          fl = fl->next;
+          fl->next = (FLIST *)NULL;
+        }
+    }
+
+  while ((nr = read(0, buf, TEE_BUFSIZE)) > 0)
+    for (fl = tee_flist; fl; fl = fl->next)
+      {
+	n = nr;
+	bp = buf;
+	do
+	  {
+	    if ((nw = write (fl->fd, bp, n)) == -1)
+	      {
+		builtin_error ("%s: write error: %s", fl->fname, strerror (errno));
+		rval = EXECUTION_FAILURE;
+		break;
+	      }
+            bp += nw;
+	  }
+	while (n -= nw);
+      }
+  if (nr < 0)
+    builtin_error ("read error: %s", strerror (errno));
+
+  /* Deallocate resources -- this is a builtin command. */
+  tee_flist = tee_flist->next;		/* skip bogus close of stdout */
+  while (tee_flist)
+    {
+      fl = tee_flist;
+      if (close (fl->fd) < 0)
+	{
+	  builtin_error ("%s: close_error: %s", fl->fname, strerror (errno));
+	  rval = EXECUTION_FAILURE;
+	}
+      tee_flist = tee_flist->next;
+      free (fl);
+    }
+  
+  return (rval);
+}
+
+char *tee_doc[] = {
+	"Duplicate standard output.",
+	"",
+	"Copy standard input to standard output, making a copy in each",
+	"filename argument.  If the `-a' option is given, the specified",
+	"files are appended to, otherwise they are overwritten.  If the",
+	"`-i' option is supplied, tee ignores interrupts.",
+	(char *)NULL
+};
+
+struct builtin tee_struct = {
+	"tee",			/* builtin name */
+	tee_builtin,		/* function implementing the builtin */
+	BUILTIN_ENABLED,	/* initial flags for builtin */
+	tee_doc,		/* array of long documentation strings. */
+	"tee [-ai] [file ...]",	/* usage synopsis; becomes short_doc */
+	0			/* reserved for internal use */
+};
diff --git a/examples/loadables/template.c b/examples/loadables/template.c
new file mode 100644
index 0000000..094b80c
--- /dev/null
+++ b/examples/loadables/template.c
@@ -0,0 +1,75 @@
+/* template - example template for loadable builtin */
+
+/* See Makefile for compilation details. */
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+#include "bashansi.h"
+#include <stdio.h>
+#include <errno.h>
+
+#include "loadables.h"
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+extern char *strerror ();
+
+int
+template_builtin (list)
+     WORD_LIST *list;
+{
+  int opt, rval;
+
+  rval = EXECUTION_SUCCESS;
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "")) != -1)
+    {
+      switch (opt)
+	{
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+  return (rval);
+}
+
+/* Called when `template' is enabled and loaded from the shared object.  If this
+   function returns 0, the load fails. */
+int
+template_builtin_load (name)
+     char *name;
+{
+  return (1);
+}
+
+/* Called when `template' is disabled. */
+void
+template_builtin_unload (name)
+     char *name;
+{
+}
+
+char *template_doc[] = {
+	"Short description.",
+	""
+	"Longer description of builtin and usage.",
+	(char *)NULL
+};
+
+struct builtin template_struct = {
+	"template",			/* builtin name */
+	template_builtin,		/* function implementing the builtin */
+	BUILTIN_ENABLED,		/* initial flags for builtin */
+	template_doc,			/* array of long documentation strings. */
+	"template",			/* usage synopsis; becomes short_doc */
+	0				/* reserved for internal use */
+};
diff --git a/examples/loadables/truefalse.c b/examples/loadables/truefalse.c
new file mode 100644
index 0000000..e011fa1
--- /dev/null
+++ b/examples/loadables/truefalse.c
@@ -0,0 +1,72 @@
+/* true and false builtins */
+
+/*
+   Copyright (C) 1999-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#include "bashtypes.h"
+#include "shell.h"
+#include "builtins.h"
+#include "common.h"
+
+int
+true_builtin (list)
+     WORD_LIST *list;
+{
+  return EXECUTION_SUCCESS;
+}
+
+int
+false_builtin (list)
+     WORD_LIST *list;
+{
+  return EXECUTION_FAILURE;
+}
+
+static char *true_doc[] = {
+	"Exit successfully.",
+	"",
+	"Return a successful result.",
+	(char *)NULL
+};
+
+static char *false_doc[] = {
+	"Exit unsuccessfully.",
+	"",
+	"Return an unsuccessful result.",
+	(char *)NULL
+};
+
+struct builtin true_struct = {
+	"true",
+	true_builtin,
+	BUILTIN_ENABLED,
+	true_doc,
+	"true",
+	0
+};
+
+struct builtin false_struct = {
+	"false",
+	false_builtin,
+	BUILTIN_ENABLED,
+	false_doc,
+	"false",
+	0
+};
diff --git a/examples/loadables/tty.c b/examples/loadables/tty.c
new file mode 100644
index 0000000..febf518
--- /dev/null
+++ b/examples/loadables/tty.c
@@ -0,0 +1,82 @@
+/* tty - return terminal name */
+
+/* See Makefile for compilation details. */
+
+/*
+   Copyright (C) 1999-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include <stdio.h>
+#include "builtins.h"
+#include "shell.h"
+#include "bashgetopt.h"
+#include "common.h"
+
+extern char *ttyname ();
+
+int
+tty_builtin (list)
+     WORD_LIST *list;
+{
+  int opt, sflag;
+  char *t;
+
+  reset_internal_getopt ();
+  sflag = 0;
+  while ((opt = internal_getopt (list, "s")) != -1)
+    {
+      switch (opt)
+	{
+	case 's':
+	  sflag = 1;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+  t = ttyname (0);
+  if (sflag == 0)
+    puts (t ? t : "not a tty");
+  return (t ? EXECUTION_SUCCESS : EXECUTION_FAILURE);
+}
+
+char *tty_doc[] = {
+	"Display terminal name.",
+	"",
+	"tty writes the name of the terminal that is opened for standard",
+	"input to standard output.  If the `-s' option is supplied, nothing",
+	"is written; the exit status determines whether or not the standard",
+	"input is connected to a tty.",
+	(char *)NULL
+};
+
+/* The standard structure describing a builtin command.  bash keeps an array
+   of these structures. */
+struct builtin tty_struct = {
+	"tty",			/* builtin name */
+	tty_builtin,		/* function implementing the builtin */
+	BUILTIN_ENABLED,	/* initial flags for builtin */
+	tty_doc,		/* array of long documentation strings. */
+	"tty [-s]",		/* usage synopsis; becomes short_doc */
+	0			/* reserved for internal use */
+};
diff --git a/examples/loadables/uname.c b/examples/loadables/uname.c
new file mode 100644
index 0000000..106a1c8
--- /dev/null
+++ b/examples/loadables/uname.c
@@ -0,0 +1,162 @@
+/*
+ * uname - print system information
+ *
+ * usage: uname [-amnrsv]
+ *
+ */
+
+/*
+   Copyright (C) 1999-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+#include <stdio.h>
+
+#include "bashtypes.h"
+
+#if defined (HAVE_UNAME)
+#  include <sys/utsname.h>
+#else
+struct utsname {
+	char	sysname[32];
+	char	nodename[32];
+	char	release[32];
+	char	version[32];
+	char	machine[32];
+};
+#endif
+
+#include <errno.h>
+
+#include "builtins.h"
+#include "shell.h"
+#include "bashgetopt.h"
+#include "common.h"
+
+#define FLAG_SYSNAME	0x01	/* -s */
+#define FLAG_NODENAME	0x02	/* -n */
+#define FLAG_RELEASE	0x04	/* -r */
+#define FLAG_VERSION	0x08	/* -v */
+#define FLAG_MACHINE	0x10	/* -m, -p */
+
+#define FLAG_ALL	0x1f
+
+#ifndef errno
+extern int errno;
+#endif
+
+static void uprint();
+
+static int uname_flags;
+
+int
+uname_builtin (list)
+     WORD_LIST *list;
+{
+  int opt, r;
+  struct utsname uninfo;
+
+  uname_flags = 0;
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "amnprsv")) != -1)
+    {
+      switch (opt)
+	{
+	case 'a':
+	  uname_flags |= FLAG_ALL;
+	  break;
+	case 'm':
+	case 'p':
+	  uname_flags |= FLAG_MACHINE;
+	  break;
+	case 'n':
+	  uname_flags |= FLAG_NODENAME;
+	  break;
+	case 'r':
+	  uname_flags |= FLAG_RELEASE;
+	  break;
+	case 's':
+	  uname_flags |= FLAG_SYSNAME;
+	  break;
+	case 'v':
+	  uname_flags |= FLAG_VERSION;
+	  break;
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+
+  if (list)
+    {
+      builtin_usage ();
+      return (EX_USAGE);
+    }
+
+  if (uname_flags == 0)
+    uname_flags = FLAG_SYSNAME;
+
+  /* Only ancient systems will not have uname(2). */
+#ifdef HAVE_UNAME
+  if (uname (&uninfo) < 0)
+    {
+      builtin_error ("cannot get system name: %s", strerror (errno));
+      return (EXECUTION_FAILURE);
+    }
+#else
+  builtin_error ("cannot get system information: uname(2) not available");
+  return (EXECUTION_FAILURE);
+#endif
+
+  uprint (FLAG_SYSNAME, uninfo.sysname);
+  uprint (FLAG_NODENAME, uninfo.nodename);
+  uprint (FLAG_RELEASE, uninfo.release);
+  uprint (FLAG_VERSION, uninfo.version);
+  uprint (FLAG_MACHINE, uninfo.machine);
+
+  return (EXECUTION_SUCCESS);
+}
+
+static void
+uprint (flag, info)
+     int flag;
+     char *info;
+{
+  if (uname_flags & flag)
+    {
+      uname_flags &= ~flag;
+      printf ("%s%c", info, uname_flags ? ' ' : '\n');
+    }
+}
+
+char *uname_doc[] = {
+	"Display system information.",
+	"",
+	"Display information about the system hardware and OS.",
+	(char *)NULL
+};
+
+struct builtin uname_struct = {
+	"uname",
+	uname_builtin,
+	BUILTIN_ENABLED,
+	uname_doc,
+	"uname [-amnrsv]",
+	0
+};
diff --git a/examples/loadables/unlink.c b/examples/loadables/unlink.c
new file mode 100644
index 0000000..ff2a78a
--- /dev/null
+++ b/examples/loadables/unlink.c
@@ -0,0 +1,74 @@
+/* unlink - remove a directory entry */
+
+/* Should only be used to remove directories by a superuser prepared to let
+   fsck clean up the file system. */
+
+/*
+   Copyright (C) 1999-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+
+#include "builtins.h"
+#include "shell.h"
+#include "common.h"
+
+#ifndef errno
+extern int errno;
+#endif
+
+int
+unlink_builtin (list)
+     WORD_LIST *list;
+{
+  if (list == 0)
+    {
+      builtin_usage ();
+      return (EX_USAGE);
+    }
+
+  if (unlink (list->word->word) != 0)
+    {
+      builtin_error ("%s: cannot unlink: %s", list->word->word, strerror (errno));
+      return (EXECUTION_FAILURE);
+    }
+
+  return (EXECUTION_SUCCESS);
+}
+
+char *unlink_doc[] = {
+	"Remove a directory entry.",
+	"",
+	"Forcibly remove a directory entry, even if it's a directory.",
+	(char *)NULL
+};
+
+struct builtin unlink_struct = {
+	"unlink",		/* builtin name */
+	unlink_builtin,		/* function implementing the builtin */
+	BUILTIN_ENABLED,	/* initial flags for builtin */
+	unlink_doc,		/* array of long documentation strings. */
+	"unlink name",		/* usage synopsis; becomes short_doc */
+	0			/* reserved for internal use */
+};
diff --git a/examples/loadables/whoami.c b/examples/loadables/whoami.c
new file mode 100644
index 0000000..3e7e36e
--- /dev/null
+++ b/examples/loadables/whoami.c
@@ -0,0 +1,75 @@
+/*
+ * whoami - print out username of current user
+ */
+
+/*
+   Copyright (C) 1999-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+#include <stdio.h>
+
+#include "builtins.h"
+#include "shell.h"
+#include "bashgetopt.h"
+#include "common.h"
+
+int
+whoami_builtin (list)
+     WORD_LIST *list;
+{
+  int opt;
+
+  reset_internal_getopt ();
+  while ((opt = internal_getopt (list, "")) != -1)
+    {
+      switch (opt)
+	{
+	CASE_HELPOPT;
+	default:
+	  builtin_usage ();
+	  return (EX_USAGE);
+	}
+    }
+  list = loptend;
+  if (list)
+    {
+      builtin_usage ();
+      return (EX_USAGE);
+    }
+
+  if (current_user.user_name == 0)
+    get_current_user_info ();
+  printf ("%s\n", current_user.user_name);
+  return (EXECUTION_SUCCESS);
+}
+
+char *whoami_doc[] = {
+	"Print user name",
+	"",
+	"Display name of current user.",
+	(char *)NULL
+};
+
+struct builtin whoami_struct = {
+	"whoami",
+	whoami_builtin,
+	BUILTIN_ENABLED,
+	whoami_doc,
+	"whoami",
+	0
+};
diff --git a/examples/misc/aliasconv.bash b/examples/misc/aliasconv.bash
new file mode 100755
index 0000000..22a0447
--- /dev/null
+++ b/examples/misc/aliasconv.bash
@@ -0,0 +1,44 @@
+#! /bin/bash
+#
+# aliasconv.bash - convert csh aliases to bash aliases and functions
+#
+# usage: aliasconv.bash
+#
+# Chet Ramey
+# chet@po.cwru.edu
+#
+trap 'rm -f $TMPFILE' 0 1 2 3 6 15
+
+TMPFILE=$(mktemp -t cb.XXXXXX) || exit 1
+
+T=$'\t'
+
+cat << \EOF >$TMPFILE
+mkalias ()
+{
+	case $2 in
+	'')	echo alias ${1}="''" ;;
+	*[#\!]*)
+		comm=$(echo $2 | sed  's/\!\*/"$\@"/g
+				      s/\!:\([1-9]\)/"$\1"/g
+			              s/#/\#/g')
+		echo $1 \(\) "{" command "$comm"  "; }"
+		;;
+	*)	echo alias ${1}=\'$(echo "${2}" | sed "s:':'\\\\'':g")\' ;;
+	esac
+}
+EOF
+
+# the first thing we want to do is to protect single quotes in the alias,
+# since they whole thing is going to be surrounded by single quotes when
+# passed to mkalias
+
+sed -e "s:':\\'\\\'\\':" -e "s/^\([a-zA-Z0-9_-]*\)$T\(.*\)$/mkalias \1 '\2'/" >>$TMPFILE
+
+$BASH $TMPFILE | sed -e 's/\$cwd/\$PWD/g' \
+		     -e 's/\$term/\$TERM/g' \
+		     -e 's/\$home/\$HOME/g' \
+		     -e 's/\$user/\$USER/g' \
+		     -e 's/\$prompt/\$PS1/g'
+
+exit 0
diff --git a/examples/misc/aliasconv.sh b/examples/misc/aliasconv.sh
new file mode 100755
index 0000000..fe975d6
--- /dev/null
+++ b/examples/misc/aliasconv.sh
@@ -0,0 +1,42 @@
+#! /bin/bash
+#
+# aliasconv.sh - convert csh aliases to bash aliases and functions
+#
+# usage: aliasconv.sh
+#
+# Chet Ramey
+# chet@po.cwru.edu
+#
+trap 'rm -f $TMPFILE' 0 1 2 3 6 15
+TMPFILE=$(mktemp -t cb.XXXXXX) || exit 1
+T='	'
+
+cat << \EOF >$TMPFILE
+mkalias ()
+{
+	case $2 in
+	'')	echo alias ${1}="''" ;;
+	*[#\!]*)
+		comm=`echo $2 | sed  's/\\!\*/"$\@"/g
+				      s/\\!:\([1-9]\)/"$\1"/g
+			              s/#/\#/g'`
+		echo $1 \(\) "{" command "$comm"  "; }"
+		;;
+	*)	echo alias ${1}=\'`echo "${2}" | sed "s:':'\\\\\\\\'':"`\' ;;
+	esac
+}
+EOF
+
+# the first thing we want to do is to protect single quotes in the alias,
+# since they whole thing is going to be surrounded by single quotes when
+# passed to mkalias
+
+sed -e "s:':\\'\\\'\\':" -e "s/^\([a-zA-Z0-9_-]*\)$T\(.*\)$/mkalias \1 '\2'/" >>$TMPFILE
+
+sh $TMPFILE | sed -e 's/\$cwd/\$PWD/g' \
+		     -e 's/\$term/\$TERM/g' \
+		     -e 's/\$home/\$HOME/g' \
+		     -e 's/\$user/\$USER/g' \
+		     -e 's/\$prompt/\$PS1/g'
+
+exit 0
diff --git a/examples/misc/cshtobash b/examples/misc/cshtobash
new file mode 100755
index 0000000..ce49bfc
--- /dev/null
+++ b/examples/misc/cshtobash
@@ -0,0 +1,139 @@
+#! /bin/bash
+#
+# cshtobash - convert csh aliases, environment variables, and variables to
+#	      bash equivalents
+#
+# usage: cshtobash [filename]
+#
+# If filename is given, that file is sourced.  Note that csh always
+# sources .cshrc.  To recreate your csh login environment, run
+# `cshtobash ~/.login'.
+#
+# Inspired by (and some borrowed from) a similar program distributed with
+# zsh-3.0.
+#
+# Chet Ramey
+# chet@po.cwru.edu
+#
+trap 'rm -f $TMPFILE1 $TMPFILEa $TMPFILEe $TMPFILEv $TMPFILEco $TMPFILEci' 0 1 2 3 6 15
+
+{ TMPFILE1=$(mktemp -t cb.1.XXXXXX) &&
+  TMPFILEa=$(mktemp -t cb.a.XXXXXX) &&
+  TMPFILEe=$(mktemp -t cb.e.XXXXXX) &&
+  TMPFILEv=$(mktemp -t cb.v.XXXXXX) &&
+  TMPFILEco=$(mktemp -t cshout.XXXXXX) &&
+  TMPFILEci=$(mktemp -t cshin.XXXXXX)
+} || exit 1
+
+
+T=$'\t'
+
+SOURCE="${1:+source $1}"
+
+cat << EOF >$TMPFILEci
+$SOURCE
+alias >! $TMPFILEa
+setenv >! $TMPFILEe
+set >! $TMPFILEv
+EOF
+
+# give csh a minimal environment, similar to what login would provide
+/usr/bin/env - USER=$USER HOME=$HOME PATH=/usr/bin:/bin:/usr/ucb:. TERM=$TERM SHELL=$SHELL /bin/csh -i < $TMPFILEci > $TMPFILEco 2>&1
+
+# First convert aliases
+
+cat << \EOF >$TMPFILE1
+mkalias ()
+{
+	case $2 in
+	'')	echo alias ${1}="''" ;;
+	*[#\!]*)
+		comm=$(echo $2 | sed  's/\!\*/"$\@"/g
+				       s/\!:\([1-9]\)/"$\1"/g
+			               s/#/\#/g')
+		echo $1 \(\) "{" command "$comm"  "; }"
+		;;
+	*)	echo alias ${1}=\'$(echo "${2}" | sed "s:':'\\\\'':")\' ;;
+	esac
+}
+EOF
+
+sed "s/^\([a-zA-Z0-9_]*\)$T\(.*\)$/mkalias \1 '\2'/" < $TMPFILEa >>$TMPFILE1
+
+echo '# csh aliases'
+echo
+
+$BASH $TMPFILE1 | sed -e 's/\$cwd/\$PWD/g' \
+		   -e 's/\$term/\$TERM/g' \
+		   -e 's/\$home/\$HOME/g' \
+		   -e 's/\$user/\$USER/g' \
+		   -e 's/\$prompt/\$PS1/g'
+
+# Next, convert environment variables
+echo
+echo '# csh environment variables'
+echo
+
+# Would be nice to deal with embedded newlines, e.g. in TERMCAP, but ...
+sed -e '/^SHLVL/d' \
+    -e '/^PWD/d' \
+    -e "s/'/'"\\\\"''"/g \
+    -e "s/^\([A-Za-z0-9_]*=\)/export \1'/" \
+    -e "s/$/'/" < $TMPFILEe
+
+# Finally, convert local variables
+echo
+echo '# csh variables'
+echo
+
+sed -e 's/'"$T"'/=/' \
+    -e "s/'/'"\\\\"''"/g \
+    -e '/^[A-Za-z0-9_]*=[^(]/{
+	s/=/='"'/"'
+	s/$/'"'/"'
+	}' < $TMPFILEv |
+sed -e '/^argv=/d' -e '/^cwd=/d' -e '/^filec=/d' -e '/^status=/d' \
+	 -e '/^verbose=/d' \
+	 -e '/^term=/d' \
+	 -e '/^home=/d' \
+	 -e '/^path=/d' \
+	 -e '/^user=/d' \
+	 -e '/^shell=/d' \
+	 -e '/^cdpath=/d' \
+	 -e '/^mail=/d' \
+	 -e '/^home=/s//HOME=/' \
+	 -e '/^prompt=/s//PS1=/' \
+	 -e '/^histfile=/s//HISTFILE=/' \
+	 -e '/^history=/s//HISTSIZE=/' \
+	 -e '/^savehist=$/s//HISTFILESIZE=${HISTSIZE-500}/' \
+	 -e '/^savehist=/s//HISTFILESIZE=/' \
+	 -e '/^ignoreeof=$/s/^.*$/set -o ignoreeof # ignoreeof/' \
+	 -e '/^ignoreeof=/s//IGNOREEOF=/' \
+	 -e '/^noclobber=/s/^.*$/set -C # noclobber/' \
+	 -e '/^notify=/s/^.*$/set -b # notify/' \
+	 -e '/^noglob=/s/^.*$/set -f # noglob/' \
+
+
+# now some special csh variables converted to bash equivalents
+echo
+echo '# special csh variables converted to bash equivalents'
+echo
+
+sed -e 's/'"$T"'/=/' < $TMPFILEv |
+grep "^cdpath=" |
+sed 's/(//
+     s/ /:/g
+     s/)//
+     s/cdpath=/CDPATH=/'
+
+
+sed -e 's/'"$T"'/=/' < $TMPFILEv |
+grep "^mail=" |
+sed 's/(//
+     s/ /:/g
+     s/)//
+     s/mail=/MAILPATH=/' |
+sed -e 's/MAILPATH=\([0-9][0-9][^:]*\)$/MAILCHECK=\1/' \
+    -e 's/MAILPATH=\([0-9][0-9][^:]*\):\(.*\)/MAILCHECK=\1 MAILPATH=\2/'
+
+exit 0
diff --git a/examples/scripts/cat.sh b/examples/scripts/cat.sh
new file mode 100644
index 0000000..3e65b3f
--- /dev/null
+++ b/examples/scripts/cat.sh
@@ -0,0 +1,12 @@
+shcat()
+{
+	while read -r ; do
+		printf "%s\n" "$REPLY"
+	done
+}
+
+if [ -n "$1" ]; then
+	shcat < "$1"
+else
+	shcat
+fi
diff --git a/examples/scripts/center b/examples/scripts/center
new file mode 100644
index 0000000..dbe6133
--- /dev/null
+++ b/examples/scripts/center
@@ -0,0 +1,41 @@
+#! /bin/bash
+#
+# center - center a group of lines
+#
+# tabs in the lines might cause this to look a little bit off
+#
+#
+#  Chet Ramey <chet.ramey@case.edu>
+#
+#  Copyright 1999 Chester Ramey
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   TThis program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software Foundation,
+#   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+width=${COLUMNS:-80}
+
+if [[ $# == 0 ]]
+then
+	set -- /dev/stdin
+fi
+
+for file
+do
+	while read -r
+	do
+		printf "%*s\n" $(( (width+${#REPLY})/2 )) "$REPLY"
+	done < $file
+done
+
+exit 0
diff --git a/examples/scripts/inpath b/examples/scripts/inpath
new file mode 100755
index 0000000..95f28bc
--- /dev/null
+++ b/examples/scripts/inpath
@@ -0,0 +1,19 @@
+#! /bin/sh
+#
+# Search $PATH for a file the same name as $1; return TRUE if found.
+#
+
+command=$1
+[ -n "$command" ] || exit 1
+
+set `echo $PATH | sed 's/^:/.:/
+			s/::/:.:/g
+			s/:$/:./
+			s/:/ /g'`
+	
+while [ $# -ne 0 ] ; do
+	[ -f $1/$command ] && exit 0	# test -x not universal
+	shift
+done
+
+exit 1
diff --git a/examples/scripts/shprompt b/examples/scripts/shprompt
new file mode 100755
index 0000000..098c45f
--- /dev/null
+++ b/examples/scripts/shprompt
@@ -0,0 +1,153 @@
+#
+# shprompt -- give a prompt and get an answer satisfying certain criteria
+#
+# shprompt [-dDfFsy] prompt
+#	s = prompt for string
+#	f = prompt for filename
+#	F = prompt for full pathname to a file or directory
+#	d = prompt for a directory name
+#	D = prompt for a full pathname to a directory
+#	y = prompt for y or n answer
+#
+# Chet Ramey
+# chet@ins.CWRU.Edu
+#
+#  Copyright 2002 Chester Ramey
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   TThis program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software Foundation,
+#   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+type=file
+
+OPTS=dDfFsy
+
+succeed()
+{
+	echo "$1"
+	exit 0
+}
+
+while getopts "$OPTS" c
+do
+	case "$c" in
+	s)	type=string
+		;;
+	f)	type=file
+		;;
+	F)	type=path
+		;;
+	d)	type=dir
+		;;
+	D)	type=dirpath
+		;;
+	y)	type=yesno
+		;;
+	?)	echo "usage: $0 [-$OPTS] prompt" 1>&2
+		exit 2
+		;;
+	esac
+done
+
+if [ "$OPTIND" -gt 1 ] ; then
+	shift $(( $OPTIND - 1 ))
+fi
+
+while :
+do
+	case "$type" in
+	string)
+		echo -n "$1" 1>&2
+		read ans || exit 1
+		if [ -n "$ans" ] ; then
+			succeed "$ans"
+		fi
+		;;
+	file|path)
+		echo -n "$1" 1>&2
+		read ans || exit 1
+		#
+		# use `fn' and eval so that bash will do tilde expansion for
+		# me
+		#
+		eval fn="$ans"
+		case "$fn" in
+		/*)	if test -e "$fn" ; then
+				succeed "$fn"
+			else
+				echo "$0: '$fn' does not exist" 1>&2
+			fi
+			;;
+		*)	if [ "$type" = "path" ] ; then
+				echo "$0: must give full pathname to file" 1>&2
+			else
+				if test -e "$fn" ; then
+					succeed "$fn"
+				else
+					echo "$0: '$fn' does not exist" 1>&2
+				fi
+			fi
+			;;
+		esac
+		;;
+	dir|dirpath)
+		echo -n "$1" 1>&2
+		read ans || exit 1
+		#
+		# use `fn' and eval so that bash will do tilde expansion for
+		# me
+		#
+		eval fn="$ans"
+		case "$fn" in
+		/*)	if test -d "$fn" ; then
+				succeed "$fn"
+			elif test -e "$fn" ; then
+				echo "$0 '$fn' is not a directory" 1>&2
+			else
+				echo "$0: '$fn' does not exist" 1>&2
+			fi
+			;;
+		*)	if [ "$type" = "dirpath" ] ; then
+				echo "$0: must give full pathname to directory" 1>&2
+			else
+				if test -d "$fn" ; then
+					succeed "$fn"
+				elif test -e "$fn" ; then
+					echo "$0 '$fn' is not a directory" 1>&2
+				else
+					echo "$0: '$fn' does not exist" 1>&2
+				fi
+			fi
+			;;
+		esac
+		;;
+	yesno)
+		echo -n "$1" 1>&2
+		read ans || exit 1
+		case "$ans" in
+		y|Y|[yY][eE][sS])
+			succeed "yes"
+			;;
+		n|N|[nN][oO])
+			succeed "no"
+			exit 0
+			;;
+		*)
+			echo "$0: yes or no required" 1>&2
+			;;
+		esac
+		;;
+	esac
+done
+
+exit 1
diff --git a/examples/scripts/spin.bash b/examples/scripts/spin.bash
new file mode 100644
index 0000000..9fa9125
--- /dev/null
+++ b/examples/scripts/spin.bash
@@ -0,0 +1,37 @@
+#!/bin/bash
+#
+# spin.bash -- provide a `spinning wheel' to show progress
+#
+# Chet Ramey
+# chet@po.cwru.edu
+#
+#  Copyright 1997 Chester Ramey
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   TThis program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software Foundation,
+#   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+bs=$'\b'
+ 
+chars="|${bs} \\${bs} -${bs} /${bs}"
+ 
+# Infinite loop for demo. purposes
+while :
+do
+    for letter in $chars
+    do
+        echo -n ${letter}
+    done
+done
+
+exit 0
diff --git a/examples/scripts/xterm_title b/examples/scripts/xterm_title
new file mode 100755
index 0000000..839003f
--- /dev/null
+++ b/examples/scripts/xterm_title
@@ -0,0 +1,44 @@
+#! /bin/bash
+#
+# xterm_title - print the contents of the xterm title bar
+#
+# Derived from http://www.clark.net/pub/dickey/xterm/xterm.faq.html#how2_title
+#
+
+#  Copyright 1997 Chester Ramey
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   TThis program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software Foundation,
+#   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+P=${0##*/}
+[ -z "$DISPLAY" ] && {
+	echo "${P}: not running X" >&2
+	exit 1
+}
+
+if [ -z "$TERM" ] || [ "$TERM" != "xterm" ]; then
+	echo "${P}: not running in an xterm" >&2
+	exit 1
+fi
+
+exec </dev/tty
+old=$(stty -g)
+stty raw -echo min 0  time ${1-10}
+echo -e "\033[21t\c" > /dev/tty
+IFS='' read -r a
+stty $old
+b=${a#???}
+echo "${b%??}"
+
+exit 0
diff --git a/examples/scripts/zprintf b/examples/scripts/zprintf
new file mode 100755
index 0000000..86f9e95
--- /dev/null
+++ b/examples/scripts/zprintf
@@ -0,0 +1,43 @@
+#! /bin/bash
+#
+# zprintf - function that calls gawk to do printf for those systems that
+#	    don't have a printf executable
+#
+# The format and arguments can have trailing commas, just like gawk
+#
+# example:
+#	zprintf 'Eat %x %x and suck %x!\n' 57005 48879 64206
+#
+# Chet Ramey
+# chet@po.cwru.edu
+
+#  Copyright 1996 Chester Ramey
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   TThis program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software Foundation,
+#   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+
+[ $# -lt 1 ] && {
+	echo "zprintf: usage: zprintf format [args ...]" >&2
+	exit 2
+}
+
+fmt="${1%,}"
+shift
+
+for a in "$@"; do
+	args="$args,\"${a%,}\""
+done
+
+gawk "BEGIN { printf \"$fmt\" $args }"
diff --git a/examples/startup-files/Bash_aliases b/examples/startup-files/Bash_aliases
new file mode 100644
index 0000000..2abb93e
--- /dev/null
+++ b/examples/startup-files/Bash_aliases
@@ -0,0 +1,63 @@
+# Some useful aliases.
+alias texclean='rm -f *.toc *.aux *.log *.cp *.fn *.tp *.vr *.pg *.ky'
+alias clean='echo -n "Really clean this directory?";
+	read yorn;
+	if test "$yorn" = "y"; then
+	   rm -f \#* *~ .*~ *.bak .*.bak  *.tmp .*.tmp core a.out;
+	   echo "Cleaned.";
+	else
+	   echo "Not cleaned.";
+	fi'
+alias h='history'
+alias j="jobs -l"
+alias l="ls -l "
+alias ll="ls -l"
+alias ls="ls -F"
+alias pu="pushd"
+alias po="popd"
+
+#
+# Csh compatibility:
+#
+alias unsetenv=unset
+function setenv () {
+  export $1="$2"
+}
+
+# Function which adds an alias to the current shell and to
+# the ~/.bash_aliases file.
+add-alias ()
+{
+   local name=$1 value="$2"
+   echo alias $name=\'$value\' >>~/.bash_aliases
+   eval alias $name=\'$value\'
+   alias $name
+}
+
+# "repeat" command.  Like:
+#
+#	repeat 10 echo foo
+repeat ()
+{ 
+    local count="$1" i;
+    shift;
+    for i in $(seq 1 "$count");
+    do
+        eval "$@";
+    done
+}
+
+# Subfunction needed by `repeat'.
+seq ()
+{ 
+    local lower upper output;
+    lower=$1 upper=$2;
+
+    if [ $lower -ge $upper ]; then return; fi
+    while [ $lower -le $upper ];
+    do
+	echo -n "$lower "
+        lower=$(($lower + 1))
+    done
+    echo "$lower"
+}
diff --git a/examples/startup-files/Bash_profile b/examples/startup-files/Bash_profile
new file mode 100644
index 0000000..141e8df
--- /dev/null
+++ b/examples/startup-files/Bash_profile
@@ -0,0 +1,18 @@
+# Startup file for bash login shells.
+#
+default_dir=/usr/local/lib/
+
+if [ -n "$PS1" ]; then
+	PS1='\u@\h(\#)\$ '
+	IGNOREEOF=3
+fi
+
+LOGIN_SHELL=true
+
+# If the user has her own init file, then use that one, else use the
+# canonical one.
+if [ -f ~/.bashrc ]; then
+	. ~/.bashrc
+elif [ -f ${default_dir}Bashrc ]; then
+	. ${default_dir}Bashrc;
+fi
diff --git a/examples/startup-files/Bashrc.bfox b/examples/startup-files/Bashrc.bfox
new file mode 100644
index 0000000..efe7d88
--- /dev/null
+++ b/examples/startup-files/Bashrc.bfox
@@ -0,0 +1,70 @@
+# Bourne Again SHell init file.
+#
+# Files you make look like rw-rw-r
+umask 002
+
+# Don't make useless coredump files.  If you want a coredump,
+# say "ulimit -c unlimited" and then cause a segmentation fault.
+ulimit -c 0
+
+# Sometimes, there are lots of places that one can find tex inputs.
+export TEXINPUTS=.:$HOME/bin:/usr/lib/tex/inputs:/usr/local/lib/tex/inputs
+
+# Where's the Gnu stuff at?
+GNU=/usr/gnu/bin
+X11=/usr/bin/X11
+
+UTIL_PATH=$GNU:$X11
+STANDARD_PATH=/usr/local/bin:/usr/ucb:/bin:/usr/bin:/usr/etc:/etc:/usr/games
+
+if [ -d $HOME/bin/$HOSTTYPE ]; then
+	MY_PATH=$HOME/bin/$HOSTTYPE
+fi
+
+if [ -d $HOME/bin ]; then
+	MY_PATH=$MY_PATH:$HOME/bin
+fi
+
+if [ -d /usr/hosts ]; then
+	STANDARD_PATH=$STANDARD_PATH:/usr/hosts
+fi
+
+PATH=.:$MY_PATH:$UTIL_PATH:$STANDARD_PATH
+
+# If not running interactively, then return
+if [ -z "$PS1" ]; then
+	return
+fi
+
+# Set ignoreeof if you don't want EOF as the sole input to the shell to
+# immediately signal a quit condition.  This only happens at the start
+# of a line if the line is empty, and you haven't just deleted a character
+# with C-d.  I turn this on in ~/.bash_profile so that only login shells
+# have the right to be obnoxious.
+# set -o ignoreeof
+
+# Set auto_resume if you want to resume on "emacs", as well as on
+# "%emacs".
+auto_resume=exact
+
+# Set notify if you want to be asynchronously notified about background
+# job completion.
+set -o notify
+
+# Make it so that failed `exec' commands don't flush this shell.
+shopt -s execfail
+
+if [ -z "$LOGIN_SHELL" ]; then
+	PS1="\u@\h\$ "
+fi
+
+HISTSIZE=256
+MAILCHECK=60
+
+# A couple of default aliases.
+alias j='jobs -l'
+alias po=popd
+alias pu=pushd
+alias ls='ls -F'
+
+[ -f ~/.bash_aliases ] && . ~/.bash_aliases
diff --git a/examples/startup-files/README b/examples/startup-files/README
new file mode 100644
index 0000000..00df041
--- /dev/null
+++ b/examples/startup-files/README
@@ -0,0 +1,12 @@
+Some sample startup files.  The ones starting with capital letters
+are originally from Brian Fox.  The ones starting with lowercase
+letters are from Chet Ramey.
+
+They will require changes for your environment.
+
+Bash_aliases	Some useful aliases (Fox).
+Bash_profile	Sample startup file for bash login shells (Fox).
+bash-profile	Sample startup file for bash login shells (Ramey).
+bashrc		Sample Bourne Again SHell init file (Ramey).
+Bashrc.bfox	Sample Bourne Again SHell init file (Fox).
+README		README
diff --git a/examples/startup-files/bash-profile b/examples/startup-files/bash-profile
new file mode 100644
index 0000000..e811df8
--- /dev/null
+++ b/examples/startup-files/bash-profile
@@ -0,0 +1,39 @@
+# This is the filename where your incoming mail arrives.
+MAIL=~/mbox
+MAILCHECK=30
+
+HISTFILE=~/.history/history.$HOSTNAME
+
+PATH1=/usr/homes/chet/bin.$HOSTTYPE:/usr/local/bin/gnu:
+PATH2=/usr/local/bin:/usr/ucb:/bin:/usr/bin/X11:.
+PATH3=/usr/bin:/usr/new/bin:/usr/contrib/bin
+PATH=$PATH1:$PATH2:$PATH3
+
+EDITOR=/usr/local/bin/ce VISUAL=/usr/local/bin/ce FCEDIT=/usr/local/bin/ce
+
+SHELL=${SHELL:-${BASH:-/bin/bash}}
+
+PAGER=/usr/local/bin/less
+LESS='-i -e -M -P%t?f%f :stdin .?pb%pb\%:?lbLine %lb:?bbByte %bb:-...'
+#
+# Bogus 1003.2 variables.  This should really be in /etc/profile
+#
+LOGNAME=${USER-$(whoami)}
+TZ=US/Eastern
+
+export HOME VISUAL EDITOR MAIL SHELL PATH TERM 
+export PAGER LESS TERMCAP HISTSIZE HISTFILE MAIL MAILCHECK LOGNAME TZ
+
+PS1="${HOSTNAME}\$ "
+PS2='> '
+export PS1 PS2
+
+umask 022
+
+if [ -f /unix ] ; then
+	stty intr ^c	# bogus
+fi
+
+if [ -f ~/.bashrc ] ; then
+	. ~/.bashrc
+fi
diff --git a/examples/startup-files/bashrc b/examples/startup-files/bashrc
new file mode 100644
index 0000000..2d8d37b
--- /dev/null
+++ b/examples/startup-files/bashrc
@@ -0,0 +1,133 @@
+case $- in
+*i*)	;;
+*)	return ;;
+esac
+
+# bogus
+if [ -f /unix ] ; then	
+	alias ls='/bin/ls -CF'
+else
+	alias ls='/bin/ls -F'
+fi
+alias ll='ls -l'
+alias dir='ls -ba'
+
+alias ss="ps -aux"
+alias dot='ls .[a-zA-Z0-9_]*'
+alias news="xterm -g 80x45 -e trn -e -S1 -N &"
+
+alias c="clear"
+alias m="more"
+alias j="jobs"
+
+# common misspellings
+alias mroe=more
+alias pdw=pwd
+
+hash -p /usr/bin/mail mail
+
+if [ -z "$HOST" ] ; then
+	export HOST=${HOSTNAME}
+fi
+
+HISTIGNORE="[   ]*:&:bg:fg"
+
+psgrep()
+{
+	ps -aux | grep $1 | grep -v grep
+}
+
+#
+# This is a little like `zap' from Kernighan and Pike
+#
+
+pskill()
+{
+	local pid
+
+	pid=$(ps -ax | grep $1 | grep -v grep | awk '{ print $1 }')
+	echo -n "killing $1 (process $pid)..."
+	kill -9 $pid
+	echo "slaughtered."
+}
+
+term()
+{
+        TERM=$1
+	export TERM
+	tset
+}
+
+xtitle () 
+{ 
+	echo -n -e "\033]0;$*\007"
+}
+
+cd()
+{
+	builtin cd "$@" && xtitle $HOST: $PWD
+}
+
+bold()
+{
+	tput smso
+}
+
+unbold()
+{
+	tput rmso
+}
+
+if [ -f /unix ] ; then
+clear()
+{
+	tput clear
+}
+fi
+
+rot13()
+{
+	if [ $# = 0 ] ; then
+		tr "[a-m][n-z][A-M][N-Z]" "[n-z][a-m][N-Z][A-M]"
+	else
+		tr "[a-m][n-z][A-M][N-Z]" "[n-z][a-m][N-Z][A-M]" < $1
+	fi
+}
+
+watch()
+{
+        if [ $# -ne 1 ] ; then
+                tail -f nohup.out
+        else
+                tail -f $1
+        fi
+}
+
+#
+#       Remote login passing all 8 bits (so meta key will work)
+#
+rl()
+{
+        rlogin $* -8
+}
+
+function setenv()
+{
+	if [ $# -ne 2 ] ; then
+		echo "setenv: Too few arguments"
+	else
+		export $1="$2"
+	fi
+}
+
+function chmog()
+{
+	if [ $# -ne 4 ] ; then
+		echo "usage: chmog mode owner group file"
+		return 1
+	else
+		chmod $1 $4
+		chown $2 $4
+		chgrp $3 $4
+	fi
+}
diff --git a/execute_cmd.c b/execute_cmd.c
new file mode 100644
index 0000000..d2a0dd7
--- /dev/null
+++ b/execute_cmd.c
@@ -0,0 +1,6070 @@
+/* execute_cmd.c -- Execute a COMMAND structure. */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#if !defined (__GNUC__) && !defined (HAVE_ALLOCA_H) && defined (_AIX)
+  #pragma alloca
+#endif /* _AIX && RISC6000 && !__GNUC__ */
+
+#include <stdio.h>
+#include "chartypes.h"
+#include "bashtypes.h"
+#if !defined (_MINIX) && defined (HAVE_SYS_FILE_H)
+#  include <sys/file.h>
+#endif
+#include "filecntl.h"
+#include "posixstat.h"
+#include <signal.h>
+#if defined (HAVE_SYS_PARAM_H)
+#  include <sys/param.h>
+#endif
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "posixtime.h"
+
+#if defined (HAVE_SYS_RESOURCE_H) && !defined (RLIMTYPE)
+#  include <sys/resource.h>
+#endif
+
+#if defined (HAVE_SYS_TIMES_H) && defined (HAVE_TIMES)
+#  include <sys/times.h>
+#endif
+
+#include <errno.h>
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+#define NEED_FPURGE_DECL
+#define NEED_SH_SETLINEBUF_DECL
+
+#include "bashansi.h"
+#include "bashintl.h"
+
+#include "memalloc.h"
+#include "shell.h"
+#include <y.tab.h>	/* use <...> so we pick it up from the build directory */
+#include "parser.h"
+#include "flags.h"
+#include "builtins.h"
+#include "hashlib.h"
+#include "jobs.h"
+#include "execute_cmd.h"
+#include "findcmd.h"
+#include "redir.h"
+#include "trap.h"
+#include "pathexp.h"
+#include "hashcmd.h"
+
+#if defined (COND_COMMAND)
+#  include "test.h"
+#endif
+
+#include "builtins/common.h"
+#include "builtins/builtext.h"	/* list of builtins */
+
+#include "builtins/getopt.h"
+
+#include <glob/strmatch.h>
+#include <tilde/tilde.h>
+
+#if defined (BUFFERED_INPUT)
+#  include "input.h"
+#endif
+
+#if defined (ALIAS)
+#  include "alias.h"
+#endif
+
+#if defined (HISTORY)
+#  include "bashhist.h"
+#endif
+
+#if defined (HAVE_MBSTR_H) && defined (HAVE_MBSCHR)
+#  include <mbstr.h>		/* mbschr */
+#endif
+
+extern int command_string_index;
+extern char *the_printed_command;
+extern time_t shell_start_time;
+#if defined (HAVE_GETTIMEOFDAY)
+extern struct timeval shellstart;
+#endif
+#if 0
+extern char *glob_argv_flags;
+#endif
+
+extern int close PARAMS((int));
+
+/* Static functions defined and used in this file. */
+static void close_pipes PARAMS((int, int));
+static void do_piping PARAMS((int, int));
+static void bind_lastarg PARAMS((char *));
+static int shell_control_structure PARAMS((enum command_type));
+static void cleanup_redirects PARAMS((REDIRECT *));
+
+#if defined (JOB_CONTROL)
+static int restore_signal_mask PARAMS((sigset_t *));
+#endif
+
+static int builtin_status PARAMS((int));
+
+static int execute_for_command PARAMS((FOR_COM *));
+#if defined (SELECT_COMMAND)
+static int displen PARAMS((const char *));
+static int print_index_and_element PARAMS((int, int, WORD_LIST *));
+static void indent PARAMS((int, int));
+static void print_select_list PARAMS((WORD_LIST *, int, int, int));
+static char *select_query PARAMS((WORD_LIST *, int, char *, int));
+static int execute_select_command PARAMS((SELECT_COM *));
+#endif
+#if defined (DPAREN_ARITHMETIC)
+static int execute_arith_command PARAMS((ARITH_COM *));
+#endif
+#if defined (COND_COMMAND)
+static int execute_cond_node PARAMS((COND_COM *));
+static int execute_cond_command PARAMS((COND_COM *));
+#endif
+#if defined (COMMAND_TIMING)
+static int mkfmt PARAMS((char *, int, int, time_t, int));
+static void print_formatted_time PARAMS((FILE *, char *,
+				      time_t, int, time_t, int,
+				      time_t, int, int));
+static int time_command PARAMS((COMMAND *, int, int, int, struct fd_bitmap *));
+#endif
+#if defined (ARITH_FOR_COMMAND)
+static intmax_t eval_arith_for_expr PARAMS((WORD_LIST *, int *));
+static int execute_arith_for_command PARAMS((ARITH_FOR_COM *));
+#endif
+static int execute_case_command PARAMS((CASE_COM *));
+static int execute_while_command PARAMS((WHILE_COM *));
+static int execute_until_command PARAMS((WHILE_COM *));
+static int execute_while_or_until PARAMS((WHILE_COM *, int));
+static int execute_if_command PARAMS((IF_COM *));
+static int execute_null_command PARAMS((REDIRECT *, int, int, int));
+static void fix_assignment_words PARAMS((WORD_LIST *));
+static int execute_simple_command PARAMS((SIMPLE_COM *, int, int, int, struct fd_bitmap *));
+static int execute_builtin PARAMS((sh_builtin_func_t *, WORD_LIST *, int, int));
+static int execute_function PARAMS((SHELL_VAR *, WORD_LIST *, int, struct fd_bitmap *, int, int));
+static int execute_builtin_or_function PARAMS((WORD_LIST *, sh_builtin_func_t *,
+					    SHELL_VAR *,
+					    REDIRECT *, struct fd_bitmap *, int));
+static void execute_subshell_builtin_or_function PARAMS((WORD_LIST *, REDIRECT *,
+						      sh_builtin_func_t *,
+						      SHELL_VAR *,
+						      int, int, int,
+						      struct fd_bitmap *,
+						      int));
+static int execute_disk_command PARAMS((WORD_LIST *, REDIRECT *, char *,
+				      int, int, int, struct fd_bitmap *, int));
+
+static char *getinterp PARAMS((char *, int, int *));
+static void initialize_subshell PARAMS((void));
+static int execute_in_subshell PARAMS((COMMAND *, int, int, int, struct fd_bitmap *));
+#if defined (COPROCESS_SUPPORT)
+static void coproc_setstatus PARAMS((struct coproc *, int));
+static int execute_coproc PARAMS((COMMAND *, int, int, struct fd_bitmap *));
+#endif
+
+static int execute_pipeline PARAMS((COMMAND *, int, int, int, struct fd_bitmap *));
+
+static int execute_connection PARAMS((COMMAND *, int, int, int, struct fd_bitmap *));
+
+static int execute_intern_function PARAMS((WORD_DESC *, FUNCTION_DEF *));
+
+/* Set to 1 if fd 0 was the subject of redirection to a subshell.  Global
+   so that reader_loop can set it to zero before executing a command. */
+int stdin_redir;
+
+/* The name of the command that is currently being executed.
+   `test' needs this, for example. */
+char *this_command_name;
+
+/* The printed representation of the currently-executing command (same as
+   the_printed_command), except when a trap is being executed.  Useful for
+   a debugger to know where exactly the program is currently executing. */
+char *the_printed_command_except_trap;
+
+/* For catching RETURN in a function. */
+int return_catch_flag;
+int return_catch_value;
+procenv_t return_catch;
+
+/* The value returned by the last synchronous command. */
+volatile int last_command_exit_value;
+
+/* Whether or not the last command (corresponding to last_command_exit_value)
+   was terminated by a signal, and, if so, which one. */
+int last_command_exit_signal;
+
+/* Are we currently ignoring the -e option for the duration of a builtin's
+   execution? */
+int builtin_ignoring_errexit = 0;
+
+/* The list of redirections to perform which will undo the redirections
+   that I made in the shell. */
+REDIRECT *redirection_undo_list = (REDIRECT *)NULL;
+
+/* The list of redirections to perform which will undo the internal
+   redirections performed by the `exec' builtin.  These are redirections
+   that must be undone even when exec discards redirection_undo_list. */
+REDIRECT *exec_redirection_undo_list = (REDIRECT *)NULL;
+
+/* When greater than zero, value is the `level' of builtins we are
+   currently executing (e.g. `eval echo a' would have it set to 2). */
+int executing_builtin = 0;
+
+/* Non-zero if we are executing a command list (a;b;c, etc.) */
+int executing_list = 0;
+
+/* Non-zero if failing commands in a command substitution should not exit the
+   shell even if -e is set.  Used to pass the CMD_IGNORE_RETURN flag down to
+   commands run in command substitutions by parse_and_execute. */
+int comsub_ignore_return = 0;
+
+/* Non-zero if we have just forked and are currently running in a subshell
+   environment. */
+int subshell_environment;
+
+/* Count of nested subshells, like SHLVL.  Available via $BASH_SUBSHELL */
+int subshell_level = 0;
+
+/* Currently-executing shell function. */
+SHELL_VAR *this_shell_function;
+
+/* If non-zero, matches in case and [[ ... ]] are case-insensitive */
+int match_ignore_case = 0;
+
+int executing_command_builtin = 0;
+
+struct stat SB;		/* used for debugging */
+
+static int special_builtin_failed;
+
+static COMMAND *currently_executing_command;
+
+/* The line number that the currently executing function starts on. */
+static int function_line_number;
+
+/* XXX - set to 1 if we're running the DEBUG trap and we want to show the line
+   number containing the function name.  Used by executing_line_number to
+   report the correct line number.  Kind of a hack. */
+static int showing_function_line;
+
+static int connection_count;
+
+/* $LINENO ($BASH_LINENO) for use by an ERR trap.  Global so parse_and_execute
+   can save and restore it. */
+int line_number_for_err_trap;
+
+/* A sort of function nesting level counter */
+int funcnest = 0;
+int funcnest_max = 0;
+
+int evalnest = 0;
+int evalnest_max = EVALNEST_MAX;
+
+int sourcenest = 0;
+int sourcenest_max = SOURCENEST_MAX;
+
+volatile int from_return_trap = 0;
+
+int lastpipe_opt = 0;
+
+struct fd_bitmap *current_fds_to_close = (struct fd_bitmap *)NULL;
+
+#define FD_BITMAP_DEFAULT_SIZE 32
+
+/* Functions to allocate and deallocate the structures used to pass
+   information from the shell to its children about file descriptors
+   to close. */
+struct fd_bitmap *
+new_fd_bitmap (size)
+     int size;
+{
+  struct fd_bitmap *ret;
+
+  ret = (struct fd_bitmap *)xmalloc (sizeof (struct fd_bitmap));
+
+  ret->size = size;
+
+  if (size)
+    {
+      ret->bitmap = (char *)xmalloc (size);
+      memset (ret->bitmap, '\0', size);
+    }
+  else
+    ret->bitmap = (char *)NULL;
+  return (ret);
+}
+
+void
+dispose_fd_bitmap (fdbp)
+     struct fd_bitmap *fdbp;
+{
+  FREE (fdbp->bitmap);
+  free (fdbp);
+}
+
+void
+close_fd_bitmap (fdbp)
+     struct fd_bitmap *fdbp;
+{
+  register int i;
+
+  if (fdbp)
+    {
+      for (i = 0; i < fdbp->size; i++)
+	if (fdbp->bitmap[i])
+	  {
+	    close (i);
+	    fdbp->bitmap[i] = 0;
+	  }
+    }
+}
+
+/* Return the line number of the currently executing command. */
+int
+executing_line_number ()
+{
+  if (executing && showing_function_line == 0 &&
+      (variable_context == 0 || interactive_shell == 0) &&
+      currently_executing_command)
+    {
+#if defined (COND_COMMAND)
+      if (currently_executing_command->type == cm_cond)
+	return currently_executing_command->value.Cond->line;
+#endif
+#if defined (DPAREN_ARITHMETIC)
+      if (currently_executing_command->type == cm_arith)
+	return currently_executing_command->value.Arith->line;
+#endif
+#if defined (ARITH_FOR_COMMAND)
+      if (currently_executing_command->type == cm_arith_for)
+	return currently_executing_command->value.ArithFor->line;
+#endif
+
+	return line_number;
+    }
+  else
+    return line_number;
+}
+
+/* Execute the command passed in COMMAND.  COMMAND is exactly what
+   read_command () places into GLOBAL_COMMAND.  See "command.h" for the
+   details of the command structure.
+
+   EXECUTION_SUCCESS or EXECUTION_FAILURE are the only possible
+   return values.  Executing a command with nothing in it returns
+   EXECUTION_SUCCESS. */
+int
+execute_command (command)
+     COMMAND *command;
+{
+  struct fd_bitmap *bitmap;
+  int result;
+
+  current_fds_to_close = (struct fd_bitmap *)NULL;
+  bitmap = new_fd_bitmap (FD_BITMAP_DEFAULT_SIZE);
+  begin_unwind_frame ("execute-command");
+  add_unwind_protect (dispose_fd_bitmap, (char *)bitmap);
+
+  /* Just do the command, but not asynchronously. */
+  result = execute_command_internal (command, 0, NO_PIPE, NO_PIPE, bitmap);
+
+  dispose_fd_bitmap (bitmap);
+  discard_unwind_frame ("execute-command");
+
+#if defined (PROCESS_SUBSTITUTION)
+  /* don't unlink fifos if we're in a shell function; wait until the function
+     returns. */
+  if (variable_context == 0 && executing_list == 0)
+    unlink_fifo_list ();
+#endif /* PROCESS_SUBSTITUTION */
+
+  QUIT;
+  return (result);
+}
+
+/* Return 1 if TYPE is a shell control structure type. */
+static int
+shell_control_structure (type)
+     enum command_type type;
+{
+  switch (type)
+    {
+#if defined (ARITH_FOR_COMMAND)
+    case cm_arith_for:
+#endif
+#if defined (SELECT_COMMAND)
+    case cm_select:
+#endif
+#if defined (DPAREN_ARITHMETIC)
+    case cm_arith:
+#endif
+#if defined (COND_COMMAND)
+    case cm_cond:
+#endif
+    case cm_case:
+    case cm_while:
+    case cm_until:
+    case cm_if:
+    case cm_for:
+    case cm_group:
+    case cm_function_def:
+      return (1);
+
+    default:
+      return (0);
+    }
+}
+
+/* A function to use to unwind_protect the redirection undo list
+   for loops. */
+static void
+cleanup_redirects (list)
+     REDIRECT *list;
+{
+  do_redirections (list, RX_ACTIVE);
+  dispose_redirects (list);
+}
+
+void
+undo_partial_redirects ()
+{
+  if (redirection_undo_list)
+    {
+      cleanup_redirects (redirection_undo_list);
+      redirection_undo_list = (REDIRECT *)NULL;
+    }
+}
+
+#if 0
+/* Function to unwind_protect the redirections for functions and builtins. */
+static void
+cleanup_func_redirects (list)
+     REDIRECT *list;
+{
+  do_redirections (list, RX_ACTIVE);
+}
+#endif
+
+void
+dispose_exec_redirects ()
+{
+  if (exec_redirection_undo_list)
+    {
+      dispose_redirects (exec_redirection_undo_list);
+      exec_redirection_undo_list = (REDIRECT *)NULL;
+    }
+}
+
+void
+dispose_partial_redirects ()
+{
+  if (redirection_undo_list)
+    {
+      dispose_redirects (redirection_undo_list);
+      redirection_undo_list = (REDIRECT *)NULL;
+    }
+}
+
+#if defined (JOB_CONTROL)
+/* A function to restore the signal mask to its proper value when the shell
+   is interrupted or errors occur while creating a pipeline. */
+static int
+restore_signal_mask (set)
+     sigset_t *set;
+{
+  return (sigprocmask (SIG_SETMASK, set, (sigset_t *)NULL));
+}
+#endif /* JOB_CONTROL */
+
+#ifdef DEBUG
+/* A debugging function that can be called from gdb, for instance. */
+void
+open_files ()
+{
+  register int i;
+  int f, fd_table_size;
+
+  fd_table_size = getdtablesize ();
+
+  fprintf (stderr, "pid %ld open files:", (long)getpid ());
+  for (i = 3; i < fd_table_size; i++)
+    {
+      if ((f = fcntl (i, F_GETFD, 0)) != -1)
+	fprintf (stderr, " %d (%s)", i, f ? "close" : "open");
+    }
+  fprintf (stderr, "\n");
+}
+#endif
+
+void
+async_redirect_stdin ()
+{
+  int fd;
+
+  fd = open ("/dev/null", O_RDONLY);
+  if (fd > 0)
+    {
+      dup2 (fd, 0);
+      close (fd);
+    }
+  else if (fd < 0)
+    internal_error (_("cannot redirect standard input from /dev/null: %s"), strerror (errno));
+}
+
+#define DESCRIBE_PID(pid) do { if (interactive) describe_pid (pid); } while (0)
+
+/* Execute the command passed in COMMAND, perhaps doing it asynchronously.
+   COMMAND is exactly what read_command () places into GLOBAL_COMMAND.
+   ASYNCHRONOUS, if non-zero, says to do this command in the background.
+   PIPE_IN and PIPE_OUT are file descriptors saying where input comes
+   from and where it goes.  They can have the value of NO_PIPE, which means
+   I/O is stdin/stdout.
+   FDS_TO_CLOSE is a list of file descriptors to close once the child has
+   been forked.  This list often contains the unusable sides of pipes, etc.
+
+   EXECUTION_SUCCESS or EXECUTION_FAILURE are the only possible
+   return values.  Executing a command with nothing in it returns
+   EXECUTION_SUCCESS. */
+int
+execute_command_internal (command, asynchronous, pipe_in, pipe_out,
+			  fds_to_close)
+     COMMAND *command;
+     int asynchronous;
+     int pipe_in, pipe_out;
+     struct fd_bitmap *fds_to_close;
+{
+  int exec_result, user_subshell, invert, ignore_return, was_error_trap, fork_flags;
+  REDIRECT *my_undo_list, *exec_undo_list;
+  char *tcmd;
+  volatile int save_line_number;
+#if defined (PROCESS_SUBSTITUTION)
+  volatile int ofifo, nfifo, osize, saved_fifo;
+  volatile void *ofifo_list;
+#endif
+
+  if (breaking || continuing)
+    return (last_command_exit_value);
+  if (command == 0 || read_but_dont_execute)
+    return (EXECUTION_SUCCESS);
+
+  QUIT;
+  run_pending_traps ();
+
+#if 0
+  if (running_trap == 0)
+#endif
+    currently_executing_command = command;
+
+  invert = (command->flags & CMD_INVERT_RETURN) != 0;
+
+  /* If we're inverting the return value and `set -e' has been executed,
+     we don't want a failing command to inadvertently cause the shell
+     to exit. */
+  if (exit_immediately_on_error && invert)	/* XXX */
+    command->flags |= CMD_IGNORE_RETURN;	/* XXX */
+
+  exec_result = EXECUTION_SUCCESS;
+
+  /* If a command was being explicitly run in a subshell, or if it is
+     a shell control-structure, and it has a pipe, then we do the command
+     in a subshell. */
+  if (command->type == cm_subshell && (command->flags & CMD_NO_FORK))
+    return (execute_in_subshell (command, asynchronous, pipe_in, pipe_out, fds_to_close));
+
+#if defined (COPROCESS_SUPPORT)
+  if (command->type == cm_coproc)
+    return (last_command_exit_value = execute_coproc (command, pipe_in, pipe_out, fds_to_close));
+#endif
+
+  user_subshell = command->type == cm_subshell || ((command->flags & CMD_WANT_SUBSHELL) != 0);
+
+#if defined (TIME_BEFORE_SUBSHELL)
+  if ((command->flags & CMD_TIME_PIPELINE) && user_subshell && asynchronous == 0)
+    {
+      command->flags |= CMD_FORCE_SUBSHELL;
+      exec_result = time_command (command, asynchronous, pipe_in, pipe_out, fds_to_close);
+      currently_executing_command = (COMMAND *)NULL;
+      return (exec_result);
+    }
+#endif
+
+  if (command->type == cm_subshell ||
+      (command->flags & (CMD_WANT_SUBSHELL|CMD_FORCE_SUBSHELL)) ||
+      (shell_control_structure (command->type) &&
+       (pipe_out != NO_PIPE || pipe_in != NO_PIPE || asynchronous)))
+    {
+      pid_t paren_pid;
+      int s;
+      char *p;
+
+      /* Fork a subshell, turn off the subshell bit, turn off job
+	 control and call execute_command () on the command again. */
+      save_line_number = line_number;
+      if (command->type == cm_subshell)
+	line_number_for_err_trap = line_number = command->value.Subshell->line;	/* XXX - save value? */
+	/* Otherwise we defer setting line_number */
+      tcmd = make_command_string (command);
+      fork_flags = asynchronous ? FORK_ASYNC : 0;
+      paren_pid = make_child (p = savestring (tcmd), fork_flags);
+
+      if (user_subshell && signal_is_trapped (ERROR_TRAP) && 
+	  signal_in_progress (DEBUG_TRAP) == 0 && running_trap == 0)
+	{
+	  FREE (the_printed_command_except_trap);
+	  the_printed_command_except_trap = savestring (the_printed_command);
+	}
+
+      if (paren_pid == 0)
+        {
+#if defined (JOB_CONTROL)
+	  FREE (p);		/* child doesn't use pointer */
+#endif
+	  /* We want to run the exit trap for forced {} subshells, and we
+	     want to note this before execute_in_subshell modifies the
+	     COMMAND struct.  Need to keep in mind that execute_in_subshell
+	     runs the exit trap for () subshells itself. */
+	  /* This handles { command; } & */
+	  s = user_subshell == 0 && command->type == cm_group && pipe_in == NO_PIPE && pipe_out == NO_PIPE && asynchronous;
+	  /* run exit trap for : | { ...; } and { ...; } | : */
+	  /* run exit trap for : | ( ...; ) and ( ...; ) | : */
+	  s += user_subshell == 0 && command->type == cm_group && (pipe_in != NO_PIPE || pipe_out != NO_PIPE) && asynchronous == 0;
+
+	  last_command_exit_value = execute_in_subshell (command, asynchronous, pipe_in, pipe_out, fds_to_close);
+	  if (s)
+	    subshell_exit (last_command_exit_value);
+	  else
+	    sh_exit (last_command_exit_value);
+	  /* NOTREACHED */
+        }
+      else
+	{
+	  close_pipes (pipe_in, pipe_out);
+
+#if defined (PROCESS_SUBSTITUTION) && defined (HAVE_DEV_FD)
+	  if (variable_context == 0)	/* wait until shell function completes */
+	    unlink_fifo_list ();
+#endif
+	  /* If we are part of a pipeline, and not the end of the pipeline,
+	     then we should simply return and let the last command in the
+	     pipe be waited for.  If we are not in a pipeline, or are the
+	     last command in the pipeline, then we wait for the subshell
+	     and return its exit status as usual. */
+	  if (pipe_out != NO_PIPE)
+	    return (EXECUTION_SUCCESS);
+
+	  stop_pipeline (asynchronous, (COMMAND *)NULL);
+
+	  line_number = save_line_number;
+
+	  if (asynchronous == 0)
+	    {
+	      was_error_trap = signal_is_trapped (ERROR_TRAP) && signal_is_ignored (ERROR_TRAP) == 0;
+	      invert = (command->flags & CMD_INVERT_RETURN) != 0;
+	      ignore_return = (command->flags & CMD_IGNORE_RETURN) != 0;
+
+	      exec_result = wait_for (paren_pid, 0);
+
+	      /* If we have to, invert the return value. */
+	      if (invert)
+		exec_result = ((exec_result == EXECUTION_SUCCESS)
+				? EXECUTION_FAILURE
+				: EXECUTION_SUCCESS);
+
+	      last_command_exit_value = exec_result;
+	      if (user_subshell && was_error_trap && ignore_return == 0 && invert == 0 && exec_result != EXECUTION_SUCCESS)
+		{
+		  save_line_number = line_number;
+		  line_number = line_number_for_err_trap;
+		  run_error_trap ();
+		  line_number = save_line_number;
+		}
+
+	      if (user_subshell && ignore_return == 0 && invert == 0 && exit_immediately_on_error && exec_result != EXECUTION_SUCCESS)
+		{
+		  run_pending_traps ();
+		  jump_to_top_level (ERREXIT);
+		}
+
+	      return (last_command_exit_value);
+	    }
+	  else
+	    {
+	      DESCRIBE_PID (paren_pid);
+
+	      run_pending_traps ();
+
+	      /* Posix 2013 2.9.3.1: "the exit status of an asynchronous list
+		 shall be zero." */
+	      last_command_exit_value = 0;
+	      return (EXECUTION_SUCCESS);
+	    }
+	}
+    }
+
+#if defined (COMMAND_TIMING)
+  if (command->flags & CMD_TIME_PIPELINE)
+    {
+      if (asynchronous)
+	{
+	  command->flags |= CMD_FORCE_SUBSHELL;
+	  exec_result = execute_command_internal (command, 1, pipe_in, pipe_out, fds_to_close);
+	}
+      else
+	{
+	  exec_result = time_command (command, asynchronous, pipe_in, pipe_out, fds_to_close);
+#if 0
+	  if (running_trap == 0)
+#endif
+	    currently_executing_command = (COMMAND *)NULL;
+	}
+      return (exec_result);
+    }
+#endif /* COMMAND_TIMING */
+
+  if (shell_control_structure (command->type) && command->redirects)
+    stdin_redir = stdin_redirects (command->redirects);
+
+#if defined (PROCESS_SUBSTITUTION)
+#  if !defined (HAVE_DEV_FD)
+  reap_procsubs ();
+#  endif
+
+  /* XXX - also if sourcelevel != 0? */
+  if (variable_context != 0 || executing_list)
+    {
+      ofifo = num_fifos ();
+      ofifo_list = copy_fifo_list ((int *)&osize);
+      begin_unwind_frame ("internal_fifos");
+      if (ofifo_list)
+	add_unwind_protect (xfree, ofifo_list);
+      saved_fifo = 1;
+    }
+  else
+    saved_fifo = 0;
+#endif
+
+  /* Handle WHILE FOR CASE etc. with redirections.  (Also '&' input
+     redirection.)  */
+  was_error_trap = signal_is_trapped (ERROR_TRAP) && signal_is_ignored (ERROR_TRAP) == 0;
+  ignore_return = (command->flags & CMD_IGNORE_RETURN) != 0;
+
+  if (do_redirections (command->redirects, RX_ACTIVE|RX_UNDOABLE) != 0)
+    {
+      undo_partial_redirects ();
+      dispose_exec_redirects ();
+#if defined (PROCESS_SUBSTITUTION)
+      if (saved_fifo)
+	{
+	  free ((void *)ofifo_list);
+          discard_unwind_frame ("internal_fifos");
+	}
+#endif
+
+      /* Handle redirection error as command failure if errexit set. */
+      last_command_exit_value = EXECUTION_FAILURE;
+      if (ignore_return == 0 && invert == 0 && pipe_in == NO_PIPE && pipe_out == NO_PIPE)
+	{
+	  if (was_error_trap)
+	    {
+	      save_line_number = line_number;
+	      line_number = line_number_for_err_trap;
+	      run_error_trap ();
+	      line_number = save_line_number;
+	    }
+	  if (exit_immediately_on_error)
+	    {	  
+	      run_pending_traps ();
+	      jump_to_top_level (ERREXIT);
+	    }
+	}
+      return (last_command_exit_value);
+    }
+
+  my_undo_list = redirection_undo_list;
+  redirection_undo_list = (REDIRECT *)NULL;
+
+  exec_undo_list = exec_redirection_undo_list;
+  exec_redirection_undo_list = (REDIRECT *)NULL;
+
+  if (my_undo_list || exec_undo_list)
+    begin_unwind_frame ("loop_redirections");
+
+  if (my_undo_list)
+    add_unwind_protect ((Function *)cleanup_redirects, my_undo_list);
+
+  if (exec_undo_list)
+    add_unwind_protect ((Function *)dispose_redirects, exec_undo_list);
+
+  QUIT;
+
+  switch (command->type)
+    {
+    case cm_simple:
+      {
+	save_line_number = line_number;
+	/* We can't rely on variables retaining their values across a
+	   call to execute_simple_command if a longjmp occurs as the
+	   result of a `return' builtin.  This is true for sure with gcc. */
+#if defined (RECYCLES_PIDS)
+	last_made_pid = NO_PID;
+#endif
+	was_error_trap = signal_is_trapped (ERROR_TRAP) && signal_is_ignored (ERROR_TRAP) == 0;
+
+	if (ignore_return && command->value.Simple)
+	  command->value.Simple->flags |= CMD_IGNORE_RETURN;
+	if (command->flags & CMD_STDIN_REDIR)
+	  command->value.Simple->flags |= CMD_STDIN_REDIR;
+
+	line_number_for_err_trap = line_number = command->value.Simple->line;
+	exec_result =
+	  execute_simple_command (command->value.Simple, pipe_in, pipe_out,
+				  asynchronous, fds_to_close);
+	line_number = save_line_number;
+
+	/* The temporary environment should be used for only the simple
+	   command immediately following its definition. */
+	dispose_used_env_vars ();
+
+#if (defined (ultrix) && defined (mips)) || defined (C_ALLOCA)
+	/* Reclaim memory allocated with alloca () on machines which
+	   may be using the alloca emulation code. */
+	(void) alloca (0);
+#endif /* (ultrix && mips) || C_ALLOCA */
+
+	/* If we forked to do the command, then we must wait_for ()
+	   the child. */
+
+	/* XXX - this is something to watch out for if there are problems
+	   when the shell is compiled without job control.  Don't worry about
+	   whether or not last_made_pid == last_pid; already_making_children
+	   tells us whether or not there are unwaited-for children to wait
+	   for and reap. */
+	if (already_making_children && pipe_out == NO_PIPE)
+	  {
+	    stop_pipeline (asynchronous, (COMMAND *)NULL);
+
+	    if (asynchronous)
+	      {
+		DESCRIBE_PID (last_made_pid);
+		exec_result = EXECUTION_SUCCESS;
+		invert = 0;		/* async commands always succeed */
+	      }
+	    else
+#if !defined (JOB_CONTROL)
+	      /* Do not wait for asynchronous processes started from
+		 startup files. */
+	    if (last_made_pid != NO_PID && last_made_pid != last_asynchronous_pid)
+#else
+	    if (last_made_pid != NO_PID)
+#endif
+	    /* When executing a shell function that executes other
+	       commands, this causes the last simple command in
+	       the function to be waited for twice.  This also causes
+	       subshells forked to execute builtin commands (e.g., in
+	       pipelines) to be waited for twice. */
+	      exec_result = wait_for (last_made_pid, 0);
+	  }
+      }
+
+      /* 2009/02/13 -- pipeline failure is processed elsewhere.  This handles
+	 only the failure of a simple command. We don't want to run the error
+	 trap if the command run by the `command' builtin fails; we want to
+	 defer that until the command builtin itself returns failure. */
+      /* 2020/07/14 -- this changes with how the command builtin is handled */ 
+      if (was_error_trap && ignore_return == 0 && invert == 0 &&
+	    pipe_in == NO_PIPE && pipe_out == NO_PIPE &&
+	    (command->value.Simple->flags & CMD_COMMAND_BUILTIN) == 0 &&
+	    exec_result != EXECUTION_SUCCESS)
+	{
+	  last_command_exit_value = exec_result;
+	  line_number = line_number_for_err_trap;
+	  run_error_trap ();
+	  line_number = save_line_number;
+	}
+
+      if (ignore_return == 0 && invert == 0 &&
+	  ((posixly_correct && interactive == 0 && special_builtin_failed) ||
+	   (exit_immediately_on_error && pipe_in == NO_PIPE && pipe_out == NO_PIPE && exec_result != EXECUTION_SUCCESS)))
+	{
+	  last_command_exit_value = exec_result;
+	  run_pending_traps ();
+
+	  /* Undo redirections before running exit trap on the way out of
+	     set -e. Report by Mark Farrell 5/19/2014 */
+	  if (exit_immediately_on_error && signal_is_trapped (0) &&
+		unwind_protect_tag_on_stack ("saved-redirects"))
+	    run_unwind_frame ("saved-redirects");
+
+	  jump_to_top_level (ERREXIT);
+	}
+
+      break;
+
+    case cm_for:
+      if (ignore_return)
+	command->value.For->flags |= CMD_IGNORE_RETURN;
+      exec_result = execute_for_command (command->value.For);
+      break;
+
+#if defined (ARITH_FOR_COMMAND)
+    case cm_arith_for:
+      if (ignore_return)
+	command->value.ArithFor->flags |= CMD_IGNORE_RETURN;
+      exec_result = execute_arith_for_command (command->value.ArithFor);
+      break;
+#endif
+
+#if defined (SELECT_COMMAND)
+    case cm_select:
+      if (ignore_return)
+	command->value.Select->flags |= CMD_IGNORE_RETURN;
+      exec_result = execute_select_command (command->value.Select);
+      break;
+#endif
+
+    case cm_case:
+      if (ignore_return)
+	command->value.Case->flags |= CMD_IGNORE_RETURN;
+      exec_result = execute_case_command (command->value.Case);
+      break;
+
+    case cm_while:
+      if (ignore_return)
+	command->value.While->flags |= CMD_IGNORE_RETURN;
+      exec_result = execute_while_command (command->value.While);
+      break;
+
+    case cm_until:
+      if (ignore_return)
+	command->value.While->flags |= CMD_IGNORE_RETURN;
+      exec_result = execute_until_command (command->value.While);
+      break;
+
+    case cm_if:
+      if (ignore_return)
+	command->value.If->flags |= CMD_IGNORE_RETURN;
+      exec_result = execute_if_command (command->value.If);
+      break;
+
+    case cm_group:
+
+      /* This code can be executed from either of two paths: an explicit
+	 '{}' command, or via a function call.  If we are executed via a
+	 function call, we have already taken care of the function being
+	 executed in the background (down there in execute_simple_command ()),
+	 and this command should *not* be marked as asynchronous.  If we
+	 are executing a regular '{}' group command, and asynchronous == 1,
+	 we must want to execute the whole command in the background, so we
+	 need a subshell, and we want the stuff executed in that subshell
+	 (this group command) to be executed in the foreground of that
+	 subshell (i.e. there will not be *another* subshell forked).
+
+	 What we do is to force a subshell if asynchronous, and then call
+	 execute_command_internal again with asynchronous still set to 1,
+	 but with the original group command, so the printed command will
+	 look right.
+
+	 The code above that handles forking off subshells will note that
+	 both subshell and async are on, and turn off async in the child
+	 after forking the subshell (but leave async set in the parent, so
+	 the normal call to describe_pid is made).  This turning off
+	 async is *crucial*; if it is not done, this will fall into an
+	 infinite loop of executions through this spot in subshell after
+	 subshell until the process limit is exhausted. */
+
+      if (asynchronous)
+	{
+	  command->flags |= CMD_FORCE_SUBSHELL;
+	  exec_result =
+	    execute_command_internal (command, 1, pipe_in, pipe_out,
+				      fds_to_close);
+	}
+      else
+	{
+	  if (ignore_return && command->value.Group->command)
+	    command->value.Group->command->flags |= CMD_IGNORE_RETURN;
+	  exec_result =
+	    execute_command_internal (command->value.Group->command,
+				      asynchronous, pipe_in, pipe_out,
+				      fds_to_close);
+	}
+      break;
+
+    case cm_connection:
+      exec_result = execute_connection (command, asynchronous,
+					pipe_in, pipe_out, fds_to_close);
+      if (asynchronous)
+	invert = 0;		/* XXX */
+
+      break;
+
+#if defined (DPAREN_ARITHMETIC)
+    case cm_arith:
+#endif
+#if defined (COND_COMMAND)
+    case cm_cond:
+#endif
+    case cm_function_def:
+      was_error_trap = signal_is_trapped (ERROR_TRAP) && signal_is_ignored (ERROR_TRAP) == 0;
+#if defined (DPAREN_ARITHMETIC)
+      if (ignore_return && command->type == cm_arith)
+	command->value.Arith->flags |= CMD_IGNORE_RETURN;
+#endif
+#if defined (COND_COMMAND)
+      if (ignore_return && command->type == cm_cond)
+	command->value.Cond->flags |= CMD_IGNORE_RETURN;
+#endif
+
+      line_number_for_err_trap = save_line_number = line_number;
+#if defined (DPAREN_ARITHMETIC)
+      if (command->type == cm_arith)
+	exec_result = execute_arith_command (command->value.Arith);
+      else
+#endif
+#if defined (COND_COMMAND)
+      if (command->type == cm_cond)
+	exec_result = execute_cond_command (command->value.Cond);
+      else
+#endif
+      if (command->type == cm_function_def)
+	exec_result = execute_intern_function (command->value.Function_def->name,
+					       command->value.Function_def);
+      line_number = save_line_number;
+
+      if (was_error_trap && ignore_return == 0 && invert == 0 && exec_result != EXECUTION_SUCCESS)
+	{
+	  last_command_exit_value = exec_result;
+	  save_line_number = line_number;
+	  line_number = line_number_for_err_trap;
+	  run_error_trap ();
+	  line_number = save_line_number;
+	}
+
+      if (ignore_return == 0 && invert == 0 && exit_immediately_on_error && exec_result != EXECUTION_SUCCESS)
+	{
+	  last_command_exit_value = exec_result;
+	  run_pending_traps ();
+	  jump_to_top_level (ERREXIT);
+	}
+
+      break;
+
+    default:
+      command_error ("execute_command", CMDERR_BADTYPE, command->type, 0);
+    }
+
+  if (my_undo_list)
+    cleanup_redirects (my_undo_list);
+
+  if (exec_undo_list)
+    dispose_redirects (exec_undo_list);
+
+  if (my_undo_list || exec_undo_list)
+    discard_unwind_frame ("loop_redirections");
+
+#if defined (PROCESS_SUBSTITUTION)
+  if (saved_fifo)
+    {
+      nfifo = num_fifos ();
+      if (nfifo > ofifo)
+	close_new_fifos ((void *)ofifo_list, osize);
+      free ((void *)ofifo_list);
+      discard_unwind_frame ("internal_fifos");
+    }
+#endif
+
+  /* Invert the return value if we have to */
+  if (invert)
+    exec_result = (exec_result == EXECUTION_SUCCESS)
+		    ? EXECUTION_FAILURE
+		    : EXECUTION_SUCCESS;
+
+#if defined (DPAREN_ARITHMETIC) || defined (COND_COMMAND)
+  /* This is where we set PIPESTATUS from the exit status of the appropriate
+     compound commands (the ones that look enough like simple commands to
+     cause confusion).  We might be able to optimize by not doing this if
+     subshell_environment != 0. */
+  switch (command->type)
+    {
+#  if defined (DPAREN_ARITHMETIC)
+    case cm_arith:
+#  endif
+#  if defined (COND_COMMAND)
+    case cm_cond:
+#  endif
+      set_pipestatus_from_exit (exec_result);
+      break;
+    default:
+      break;
+    }
+#endif
+
+  last_command_exit_value = exec_result;
+  run_pending_traps ();
+  currently_executing_command = (COMMAND *)NULL;
+
+  return (last_command_exit_value);
+}
+
+#if defined (COMMAND_TIMING)
+
+#if defined (HAVE_GETRUSAGE) && defined (HAVE_GETTIMEOFDAY)
+extern struct timeval *difftimeval PARAMS((struct timeval *, struct timeval *, struct timeval *));
+extern struct timeval *addtimeval PARAMS((struct timeval *, struct timeval *, struct timeval *));
+extern int timeval_to_cpu PARAMS((struct timeval *, struct timeval *, struct timeval *));
+#endif
+
+#define POSIX_TIMEFORMAT "real %2R\nuser %2U\nsys %2S"
+#define BASH_TIMEFORMAT  "\nreal\t%3lR\nuser\t%3lU\nsys\t%3lS"
+
+static const int precs[] = { 0, 100, 10, 1 };
+
+/* Expand one `%'-prefixed escape sequence from a time format string. */
+static int
+mkfmt (buf, prec, lng, sec, sec_fraction)
+     char *buf;
+     int prec, lng;
+     time_t sec;
+     int sec_fraction;
+{
+  time_t min;
+  char abuf[INT_STRLEN_BOUND(time_t) + 1];
+  int ind, aind;
+
+  ind = 0;
+  abuf[sizeof(abuf) - 1] = '\0';
+
+  /* If LNG is non-zero, we want to decompose SEC into minutes and seconds. */
+  if (lng)
+    {
+      min = sec / 60;
+      sec %= 60;
+      aind = sizeof(abuf) - 2;
+      do
+	abuf[aind--] = (min % 10) + '0';
+      while (min /= 10);
+      aind++;
+      while (abuf[aind])
+	buf[ind++] = abuf[aind++];
+      buf[ind++] = 'm';
+    }
+
+  /* Now add the seconds. */
+  aind = sizeof (abuf) - 2;
+  do
+    abuf[aind--] = (sec % 10) + '0';
+  while (sec /= 10);
+  aind++;
+  while (abuf[aind])
+    buf[ind++] = abuf[aind++];
+
+  /* We want to add a decimal point and PREC places after it if PREC is
+     nonzero.  PREC is not greater than 3.  SEC_FRACTION is between 0
+     and 999. */
+  if (prec != 0)
+    {
+      buf[ind++] = locale_decpoint ();
+      for (aind = 1; aind <= prec; aind++)
+	{
+	  buf[ind++] = (sec_fraction / precs[aind]) + '0';
+	  sec_fraction %= precs[aind];
+	}
+    }
+
+  if (lng)
+    buf[ind++] = 's';
+  buf[ind] = '\0';
+
+  return (ind);
+}
+
+/* Interpret the format string FORMAT, interpolating the following escape
+   sequences:
+		%[prec][l][RUS]
+
+   where the optional `prec' is a precision, meaning the number of
+   characters after the decimal point, the optional `l' means to format
+   using minutes and seconds (MMmNN[.FF]s), like the `times' builtin',
+   and the last character is one of
+   
+		R	number of seconds of `real' time
+		U	number of seconds of `user' time
+		S	number of seconds of `system' time
+
+   An occurrence of `%%' in the format string is translated to a `%'.  The
+   result is printed to FP, a pointer to a FILE.  The other variables are
+   the seconds and thousandths of a second of real, user, and system time,
+   resectively. */
+static void
+print_formatted_time (fp, format, rs, rsf, us, usf, ss, ssf, cpu)
+     FILE *fp;
+     char *format;
+     time_t rs;
+     int rsf;
+     time_t us;
+     int usf;
+     time_t ss;
+     int ssf, cpu;
+{
+  int prec, lng, len;
+  char *str, *s, ts[INT_STRLEN_BOUND (time_t) + sizeof ("mSS.FFFF")];
+  time_t sum;
+  int sum_frac;
+  int sindex, ssize;
+
+  len = strlen (format);
+  ssize = (len + 64) - (len % 64);
+  str = (char *)xmalloc (ssize);
+  sindex = 0;
+
+  for (s = format; *s; s++)
+    {
+      if (*s != '%' || s[1] == '\0')
+	{
+	  RESIZE_MALLOCED_BUFFER (str, sindex, 1, ssize, 64);
+	  str[sindex++] = *s;
+	}
+      else if (s[1] == '%')
+	{
+	  s++;
+	  RESIZE_MALLOCED_BUFFER (str, sindex, 1, ssize, 64);
+	  str[sindex++] = *s;
+	}
+      else if (s[1] == 'P')
+	{
+	  s++;
+#if 0
+	  /* clamp CPU usage at 100% */
+	  if (cpu > 10000)
+	    cpu = 10000;
+#endif
+	  sum = cpu / 100;
+	  sum_frac = (cpu % 100) * 10;
+	  len = mkfmt (ts, 2, 0, sum, sum_frac);
+	  RESIZE_MALLOCED_BUFFER (str, sindex, len, ssize, 64);
+	  strcpy (str + sindex, ts);
+	  sindex += len;
+	}
+      else
+	{
+	  prec = 3;	/* default is three places past the decimal point. */
+	  lng = 0;	/* default is to not use minutes or append `s' */
+	  s++;
+	  if (DIGIT (*s))		/* `precision' */
+	    {
+	      prec = *s++ - '0';
+	      if (prec > 3) prec = 3;
+	    }
+	  if (*s == 'l')		/* `length extender' */
+	    {
+	      lng = 1;
+	      s++;
+	    }
+	  if (*s == 'R' || *s == 'E')
+	    len = mkfmt (ts, prec, lng, rs, rsf);
+	  else if (*s == 'U')
+	    len = mkfmt (ts, prec, lng, us, usf);
+	  else if (*s == 'S')
+	    len = mkfmt (ts, prec, lng, ss, ssf);
+	  else
+	    {
+	      internal_error (_("TIMEFORMAT: `%c': invalid format character"), *s);
+	      free (str);
+	      return;
+	    }
+	  RESIZE_MALLOCED_BUFFER (str, sindex, len, ssize, 64);
+	  strcpy (str + sindex, ts);
+	  sindex += len;
+	}
+    }
+
+  str[sindex] = '\0';
+  fprintf (fp, "%s\n", str);
+  fflush (fp);
+
+  free (str);
+}
+
+static int
+time_command (command, asynchronous, pipe_in, pipe_out, fds_to_close)
+     COMMAND *command;
+     int asynchronous, pipe_in, pipe_out;
+     struct fd_bitmap *fds_to_close;
+{
+  int rv, posix_time, old_flags, nullcmd, code;
+  time_t rs, us, ss;
+  int rsf, usf, ssf;
+  int cpu;
+  char *time_format;
+  volatile procenv_t save_top_level;
+
+#if defined (HAVE_GETRUSAGE) && defined (HAVE_GETTIMEOFDAY)
+  struct timeval real, user, sys;
+  struct timeval before, after;
+#  if defined (HAVE_STRUCT_TIMEZONE)
+  struct timezone dtz;				/* posix doesn't define this */
+#  endif
+  struct rusage selfb, selfa, kidsb, kidsa;	/* a = after, b = before */
+#else
+#  if defined (HAVE_TIMES)
+  clock_t tbefore, tafter, real, user, sys;
+  struct tms before, after;
+#  endif
+#endif
+
+#if defined (HAVE_GETRUSAGE) && defined (HAVE_GETTIMEOFDAY)
+#  if defined (HAVE_STRUCT_TIMEZONE)
+  gettimeofday (&before, &dtz);
+#  else
+  gettimeofday (&before, (void *)NULL);
+#  endif /* !HAVE_STRUCT_TIMEZONE */
+  getrusage (RUSAGE_SELF, &selfb);
+  getrusage (RUSAGE_CHILDREN, &kidsb);
+#else
+#  if defined (HAVE_TIMES)
+  tbefore = times (&before);
+#  endif
+#endif
+
+  posix_time = command && (command->flags & CMD_TIME_POSIX);
+
+  nullcmd = (command == 0) || (command->type == cm_simple && command->value.Simple->words == 0 && command->value.Simple->redirects == 0);
+  if (posixly_correct && nullcmd)
+    {
+#if defined (HAVE_GETRUSAGE)
+      selfb.ru_utime.tv_sec = kidsb.ru_utime.tv_sec = selfb.ru_stime.tv_sec = kidsb.ru_stime.tv_sec = 0;
+      selfb.ru_utime.tv_usec = kidsb.ru_utime.tv_usec = selfb.ru_stime.tv_usec = kidsb.ru_stime.tv_usec = 0;
+      before = shellstart;
+#else
+      before.tms_utime = before.tms_stime = before.tms_cutime = before.tms_cstime = 0;
+      tbefore = shell_start_time;
+#endif
+    }
+
+  old_flags = command->flags;
+  COPY_PROCENV (top_level, save_top_level);
+  command->flags &= ~(CMD_TIME_PIPELINE|CMD_TIME_POSIX);
+  code = setjmp_nosigs (top_level);
+  if (code == NOT_JUMPED)
+    {
+      rv = execute_command_internal (command, asynchronous, pipe_in, pipe_out, fds_to_close);
+      command->flags = old_flags;
+    }
+  COPY_PROCENV (save_top_level, top_level);
+
+  rs = us = ss = 0;
+  rsf = usf = ssf = cpu = 0;
+
+#if defined (HAVE_GETRUSAGE) && defined (HAVE_GETTIMEOFDAY)
+#  if defined (HAVE_STRUCT_TIMEZONE)
+  gettimeofday (&after, &dtz);
+#  else
+  gettimeofday (&after, (void *)NULL);
+#  endif /* !HAVE_STRUCT_TIMEZONE */
+  getrusage (RUSAGE_SELF, &selfa);
+  getrusage (RUSAGE_CHILDREN, &kidsa);
+
+  difftimeval (&real, &before, &after);
+  timeval_to_secs (&real, &rs, &rsf);
+
+  addtimeval (&user, difftimeval(&after, &selfb.ru_utime, &selfa.ru_utime),
+		     difftimeval(&before, &kidsb.ru_utime, &kidsa.ru_utime));
+  timeval_to_secs (&user, &us, &usf);
+
+  addtimeval (&sys, difftimeval(&after, &selfb.ru_stime, &selfa.ru_stime),
+		    difftimeval(&before, &kidsb.ru_stime, &kidsa.ru_stime));
+  timeval_to_secs (&sys, &ss, &ssf);
+
+  cpu = timeval_to_cpu (&real, &user, &sys);
+#else
+#  if defined (HAVE_TIMES)
+  tafter = times (&after);
+
+  real = tafter - tbefore;
+  clock_t_to_secs (real, &rs, &rsf);
+
+  user = (after.tms_utime - before.tms_utime) + (after.tms_cutime - before.tms_cutime);
+  clock_t_to_secs (user, &us, &usf);
+
+  sys = (after.tms_stime - before.tms_stime) + (after.tms_cstime - before.tms_cstime);
+  clock_t_to_secs (sys, &ss, &ssf);
+
+  cpu = (real == 0) ? 0 : ((user + sys) * 10000) / real;
+
+#  else
+  rs = us = ss = 0;
+  rsf = usf = ssf = cpu = 0;
+#  endif
+#endif
+
+  if (posix_time)
+    time_format = POSIX_TIMEFORMAT;
+  else if ((time_format = get_string_value ("TIMEFORMAT")) == 0)
+    {
+      if (posixly_correct && nullcmd)
+	time_format = "user\t%2lU\nsys\t%2lS";
+      else
+	time_format = BASH_TIMEFORMAT;
+    }
+
+  if (time_format && *time_format)
+    print_formatted_time (stderr, time_format, rs, rsf, us, usf, ss, ssf, cpu);
+
+  if (code)
+    sh_longjmp (top_level, code);
+
+  return rv;
+}
+#endif /* COMMAND_TIMING */
+
+/* Execute a command that's supposed to be in a subshell.  This must be
+   called after make_child and we must be running in the child process.
+   The caller will return or exit() immediately with the value this returns. */
+static int
+execute_in_subshell (command, asynchronous, pipe_in, pipe_out, fds_to_close)
+     COMMAND *command;
+     int asynchronous;
+     int pipe_in, pipe_out;
+     struct fd_bitmap *fds_to_close;
+{
+  volatile int user_subshell, user_coproc, invert;
+  int return_code, function_value, should_redir_stdin, ois, result;
+  volatile COMMAND *tcom;
+
+  USE_VAR(user_subshell);
+  USE_VAR(user_coproc);
+  USE_VAR(invert);
+  USE_VAR(tcom);
+  USE_VAR(asynchronous);
+
+  subshell_level++;
+  should_redir_stdin = (asynchronous && (command->flags & CMD_STDIN_REDIR) &&
+			  pipe_in == NO_PIPE &&
+			  stdin_redirects (command->redirects) == 0);
+
+  invert = (command->flags & CMD_INVERT_RETURN) != 0;
+  user_subshell = command->type == cm_subshell || ((command->flags & CMD_WANT_SUBSHELL) != 0);
+  user_coproc = command->type == cm_coproc;
+
+  command->flags &= ~(CMD_FORCE_SUBSHELL | CMD_WANT_SUBSHELL | CMD_INVERT_RETURN);
+
+  /* If a command is asynchronous in a subshell (like ( foo ) & or
+     the special case of an asynchronous GROUP command where the
+     the subshell bit is turned on down in case cm_group: below),
+     turn off `asynchronous', so that two subshells aren't spawned.
+     XXX - asynchronous used to be set to 0 in this block, but that
+     means that setup_async_signals was never run.  Now it's set to
+     0 after subshell_environment is set appropriately and setup_async_signals
+     is run.
+
+     This seems semantically correct to me.  For example,
+     ( foo ) & seems to say ``do the command `foo' in a subshell
+     environment, but don't wait for that subshell to finish'',
+     and "{ foo ; bar ; } &" seems to me to be like functions or
+     builtins in the background, which executed in a subshell
+     environment.  I just don't see the need to fork two subshells. */
+
+  /* Don't fork again, we are already in a subshell.  A `doubly
+     async' shell is not interactive, however. */
+  if (asynchronous)
+    {
+#if defined (JOB_CONTROL)
+      /* If a construct like ( exec xxx yyy ) & is given while job
+	 control is active, we want to prevent exec from putting the
+	 subshell back into the original process group, carefully
+	 undoing all the work we just did in make_child. */
+      original_pgrp = -1;
+#endif /* JOB_CONTROL */
+      ois = interactive_shell;
+      interactive_shell = 0;
+      /* This test is to prevent alias expansion by interactive shells that
+	 run `(command) &' but to allow scripts that have enabled alias
+	 expansion with `shopt -s expand_alias' to continue to expand
+	 aliases. */
+      if (ois != interactive_shell)
+	expand_aliases = 0;
+    }
+
+  /* Subshells are neither login nor interactive. */
+  login_shell = interactive = 0;
+
+  /* And we're no longer in a loop. See Posix interp 842 (we are not in the
+     "same execution environment"). */
+  if (shell_compatibility_level > 44)
+    loop_level = 0;
+
+  if (user_subshell)
+    {
+      subshell_environment = SUBSHELL_PAREN;	/* XXX */
+      if (asynchronous)
+	subshell_environment |= SUBSHELL_ASYNC;
+    }
+  else
+    {
+      subshell_environment = 0;			/* XXX */
+      if (asynchronous)
+	subshell_environment |= SUBSHELL_ASYNC;
+      if (pipe_in != NO_PIPE || pipe_out != NO_PIPE)
+	subshell_environment |= SUBSHELL_PIPE;
+      if (user_coproc)
+	subshell_environment |= SUBSHELL_COPROC;
+    }
+
+  QUIT;
+  CHECK_TERMSIG;
+
+  reset_terminating_signals ();		/* in sig.c */
+  /* Cancel traps, in trap.c. */
+  /* Reset the signal handlers in the child, but don't free the
+     trap strings.  Set a flag noting that we have to free the
+     trap strings if we run trap to change a signal disposition. */
+  clear_pending_traps ();
+  reset_signal_handlers ();
+  subshell_environment |= SUBSHELL_RESETTRAP;
+
+  /* We are in a subshell, so forget that we are running a trap handler or
+     that the signal handler has changed (we haven't changed it!) */
+  if (running_trap > 0)
+    {
+      run_trap_cleanup (running_trap - 1);
+      running_trap = 0;		/* XXX - maybe leave this */
+    }
+
+  /* Make sure restore_original_signals doesn't undo the work done by
+     make_child to ensure that asynchronous children are immune to SIGINT
+     and SIGQUIT.  Turn off asynchronous to make sure more subshells are
+     not spawned. */
+  if (asynchronous)
+    {
+      setup_async_signals ();
+      asynchronous = 0;
+    }
+  else
+    set_sigint_handler ();
+
+#if defined (JOB_CONTROL)
+  set_sigchld_handler ();
+#endif /* JOB_CONTROL */
+
+  /* Delete all traces that there were any jobs running.  This is
+     only for subshells. */
+  without_job_control ();
+
+  if (fds_to_close)
+    close_fd_bitmap (fds_to_close);
+
+  do_piping (pipe_in, pipe_out);
+
+#if defined (COPROCESS_SUPPORT)
+  coproc_closeall ();
+#endif
+
+#if defined (PROCESS_SUBSTITUTION)
+  clear_fifo_list ();		/* XXX- we haven't created any FIFOs */
+#endif
+
+  /* If this is a user subshell, set a flag if stdin was redirected.
+     This is used later to decide whether to redirect fd 0 to
+     /dev/null for async commands in the subshell.  This adds more
+     sh compatibility, but I'm not sure it's the right thing to do.
+     Note that an input pipe to a compound command suffices to inhibit
+     the implicit /dev/null redirection for asynchronous commands
+     executed as part of that compound command. */
+  if (user_subshell)
+    {
+      stdin_redir = stdin_redirects (command->redirects) || pipe_in != NO_PIPE;
+#if 0
+      restore_default_signal (EXIT_TRAP);	/* XXX - reset_signal_handlers above */
+#endif
+    }
+  else if (shell_control_structure (command->type) && pipe_in != NO_PIPE)
+    stdin_redir = 1;
+
+  /* If this is an asynchronous command (command &), we want to
+     redirect the standard input from /dev/null in the absence of
+     any specific redirection involving stdin. */
+  if (should_redir_stdin && stdin_redir == 0)
+    async_redirect_stdin ();
+
+#if defined (BUFFERED_INPUT)
+  /* In any case, we are not reading our command input from stdin. */
+  default_buffered_input = -1;
+#endif
+
+#if 0 /* TAG: bash-5.2 */
+  if (user_subshell && command->type == cm_subshell)
+    optimize_subshell_command (command->value.Subshell->command);
+#endif
+
+  /* Do redirections, then dispose of them before recursive call. */
+  if (command->redirects)
+    {
+      if (do_redirections (command->redirects, RX_ACTIVE) != 0)
+	exit (invert ? EXECUTION_SUCCESS : EXECUTION_FAILURE);
+
+      dispose_redirects (command->redirects);
+      command->redirects = (REDIRECT *)NULL;
+    }
+
+  if (command->type == cm_subshell)
+    tcom = command->value.Subshell->command;
+  else if (user_coproc)
+    tcom = command->value.Coproc->command;
+  else
+    tcom = command;
+
+  if (command->flags & CMD_TIME_PIPELINE)
+    tcom->flags |= CMD_TIME_PIPELINE;
+  if (command->flags & CMD_TIME_POSIX)
+    tcom->flags |= CMD_TIME_POSIX;
+  
+  /* Make sure the subshell inherits any CMD_IGNORE_RETURN flag. */
+  if ((command->flags & CMD_IGNORE_RETURN) && tcom != command)
+    tcom->flags |= CMD_IGNORE_RETURN;
+
+  /* If this is a simple command, tell execute_disk_command that it
+     might be able to get away without forking and simply exec.
+     This means things like ( sleep 10 ) will only cause one fork.
+     If we're timing the command or inverting its return value, however,
+     we cannot do this optimization. */
+  if ((user_subshell || user_coproc) && (tcom->type == cm_simple || tcom->type == cm_subshell) &&
+      ((tcom->flags & CMD_TIME_PIPELINE) == 0) &&
+      ((tcom->flags & CMD_INVERT_RETURN) == 0))
+    {
+      tcom->flags |= CMD_NO_FORK;
+      if (tcom->type == cm_simple)
+	tcom->value.Simple->flags |= CMD_NO_FORK;
+    }
+
+  invert = (tcom->flags & CMD_INVERT_RETURN) != 0;
+  tcom->flags &= ~CMD_INVERT_RETURN;
+
+  result = setjmp_nosigs (top_level);
+
+  /* If we're inside a function while executing this subshell, we
+     need to handle a possible `return'. */
+  function_value = 0;
+  if (return_catch_flag)
+    function_value = setjmp_nosigs (return_catch);
+
+  /* If we're going to exit the shell, we don't want to invert the return
+     status. */
+  if (result == EXITPROG)
+    invert = 0, return_code = last_command_exit_value;
+  else if (result)
+    return_code = (last_command_exit_value == EXECUTION_SUCCESS) ? EXECUTION_FAILURE : last_command_exit_value;
+  else if (function_value)
+    return_code = return_catch_value;
+  else
+    return_code = execute_command_internal ((COMMAND *)tcom, asynchronous, NO_PIPE, NO_PIPE, fds_to_close);
+
+  /* If we are asked to, invert the return value. */
+  if (invert)
+    return_code = (return_code == EXECUTION_SUCCESS) ? EXECUTION_FAILURE
+						     : EXECUTION_SUCCESS;
+
+
+  /* If we were explicitly placed in a subshell with (), we need
+     to do the `shell cleanup' things, such as running traps[0]. */
+  if (user_subshell && signal_is_trapped (0))
+    {
+      last_command_exit_value = return_code;
+      return_code = run_exit_trap ();
+    }
+
+#if 0
+  subshell_level--;		/* don't bother, caller will just exit */
+#endif
+  return (return_code);
+  /* NOTREACHED */
+}
+
+#if defined (COPROCESS_SUPPORT)
+#define COPROC_MAX	16
+
+typedef struct cpelement
+  {
+    struct cpelement *next;
+    struct coproc *coproc;
+  }
+cpelement_t;
+    
+typedef struct cplist
+  {
+    struct cpelement *head;
+    struct cpelement *tail;
+    int ncoproc;
+    int lock;
+  }
+cplist_t;
+
+static struct cpelement *cpe_alloc PARAMS((struct coproc *));
+static void cpe_dispose PARAMS((struct cpelement *));
+static struct cpelement *cpl_add PARAMS((struct coproc *));
+static struct cpelement *cpl_delete PARAMS((pid_t));
+static void cpl_reap PARAMS((void));
+static void cpl_flush PARAMS((void));
+static void cpl_closeall PARAMS((void));
+static struct cpelement *cpl_search PARAMS((pid_t));
+static struct cpelement *cpl_searchbyname PARAMS((const char *));
+static void cpl_prune PARAMS((void));
+
+static void coproc_free PARAMS((struct coproc *));
+
+/* Will go away when there is fully-implemented support for multiple coprocs. */
+Coproc sh_coproc = { 0, NO_PID, -1, -1, 0, 0, 0, 0, 0 };
+
+cplist_t coproc_list = {0, 0, 0};
+
+/* Functions to manage the list of coprocs */
+
+static struct cpelement *
+cpe_alloc (cp)
+     Coproc *cp;
+{
+  struct cpelement *cpe;
+
+  cpe = (struct cpelement *)xmalloc (sizeof (struct cpelement));
+  cpe->coproc = cp;
+  cpe->next = (struct cpelement *)0;
+  return cpe;
+}
+
+static void
+cpe_dispose (cpe)
+      struct cpelement *cpe;
+{
+  free (cpe);
+}
+
+static struct cpelement *
+cpl_add (cp)
+     Coproc *cp;
+{
+  struct cpelement *cpe;
+
+  cpe = cpe_alloc (cp);
+
+  if (coproc_list.head == 0)
+    {
+      coproc_list.head = coproc_list.tail = cpe;
+      coproc_list.ncoproc = 0;			/* just to make sure */
+    }
+  else
+    {
+      coproc_list.tail->next = cpe;
+      coproc_list.tail = cpe;
+    }
+  coproc_list.ncoproc++;
+
+  return cpe;
+}
+
+static struct cpelement *
+cpl_delete (pid)
+     pid_t pid;
+{
+  struct cpelement *prev, *p;
+
+  for (prev = p = coproc_list.head; p; prev = p, p = p->next)
+    if (p->coproc->c_pid == pid)
+      {
+        prev->next = p->next;	/* remove from list */
+        break;
+      }
+
+  if (p == 0)
+    return 0;		/* not found */
+
+#if defined (DEBUG)
+  itrace("cpl_delete: deleting %d", pid);
+#endif
+
+  /* Housekeeping in the border cases. */
+  if (p == coproc_list.head)
+    coproc_list.head = coproc_list.head->next;
+  else if (p == coproc_list.tail)
+    coproc_list.tail = prev;
+
+  coproc_list.ncoproc--;
+  if (coproc_list.ncoproc == 0)
+    coproc_list.head = coproc_list.tail = 0;
+  else if (coproc_list.ncoproc == 1)
+    coproc_list.tail = coproc_list.head;		/* just to make sure */
+
+  return (p);
+}
+
+static void
+cpl_reap ()
+{
+  struct cpelement *p, *next, *nh, *nt;
+
+  /* Build a new list by removing dead coprocs and fix up the coproc_list
+     pointers when done. */
+  nh = nt = next = (struct cpelement *)0;
+  for (p = coproc_list.head; p; p = next)
+    {
+      next = p->next;
+      if (p->coproc->c_flags & COPROC_DEAD)
+	{
+	  coproc_list.ncoproc--;	/* keep running count, fix up pointers later */
+
+#if defined (DEBUG)
+	  itrace("cpl_reap: deleting %d", p->coproc->c_pid);
+#endif
+
+	  coproc_dispose (p->coproc);
+	  cpe_dispose (p);
+	}
+      else if (nh == 0)
+	nh = nt = p;
+      else
+	{
+	  nt->next = p;
+	  nt = nt->next;
+	}
+    }
+
+  if (coproc_list.ncoproc == 0)
+    coproc_list.head = coproc_list.tail = 0;
+  else
+    {
+      if (nt)
+        nt->next = 0;
+      coproc_list.head = nh;
+      coproc_list.tail = nt;
+      if (coproc_list.ncoproc == 1)
+	coproc_list.tail = coproc_list.head;		/* just to make sure */  
+    }
+}
+
+/* Clear out the list of saved statuses */
+static void
+cpl_flush ()
+{
+  struct cpelement *cpe, *p;
+
+  for (cpe = coproc_list.head; cpe; )
+    {
+      p = cpe;
+      cpe = cpe->next;
+
+      coproc_dispose (p->coproc);
+      cpe_dispose (p);
+    }
+
+  coproc_list.head = coproc_list.tail = 0;
+  coproc_list.ncoproc = 0;
+}
+
+static void
+cpl_closeall ()
+{
+  struct cpelement *cpe;
+
+  for (cpe = coproc_list.head; cpe; cpe = cpe->next)
+    coproc_close (cpe->coproc);
+}
+
+static void
+cpl_fdchk (fd)
+     int fd;
+{
+  struct cpelement *cpe;
+
+  for (cpe = coproc_list.head; cpe; cpe = cpe->next)
+    coproc_checkfd (cpe->coproc, fd);
+}
+
+/* Search for PID in the list of coprocs; return the cpelement struct if
+   found.  If not found, return NULL. */
+static struct cpelement *
+cpl_search (pid)
+     pid_t pid;
+{
+  struct cpelement *cpe;
+
+  for (cpe = coproc_list.head ; cpe; cpe = cpe->next)
+    if (cpe->coproc->c_pid == pid)
+      return cpe;
+  return (struct cpelement *)NULL;
+}
+
+/* Search for the coproc named NAME in the list of coprocs; return the
+   cpelement struct if found.  If not found, return NULL. */
+static struct cpelement *
+cpl_searchbyname (name)
+     const char *name;
+{
+  struct cpelement *cp;
+
+  for (cp = coproc_list.head ; cp; cp = cp->next)
+    if (STREQ (cp->coproc->c_name, name))
+      return cp;
+  return (struct cpelement *)NULL;
+}
+
+static pid_t
+cpl_firstactive ()
+{
+  struct cpelement *cpe;
+
+  for (cpe = coproc_list.head ; cpe; cpe = cpe->next)
+    if ((cpe->coproc->c_flags & COPROC_DEAD) == 0)
+      return cpe->coproc->c_pid;
+  return (pid_t)NO_PID;
+}
+
+#if 0
+static void
+cpl_prune ()
+{
+  struct cpelement *cp;
+
+  while (coproc_list.head && coproc_list.ncoproc > COPROC_MAX)
+    {
+      cp = coproc_list.head;
+      coproc_list.head = coproc_list.head->next;
+      coproc_dispose (cp->coproc);
+      cpe_dispose (cp);
+      coproc_list.ncoproc--;
+    }
+}
+#endif
+
+/* These currently use a single global "shell coproc" but are written in a
+   way to not preclude additional coprocs later (using the list management
+   package above). */
+
+struct coproc *
+getcoprocbypid (pid)
+     pid_t pid;
+{
+#if MULTIPLE_COPROCS
+  struct cpelement *p;
+
+  p = cpl_search (pid);
+  return (p ? p->coproc : 0);
+#else
+  return (pid == sh_coproc.c_pid ? &sh_coproc : 0);
+#endif
+}
+
+struct coproc *
+getcoprocbyname (name)
+     const char *name;
+{
+#if MULTIPLE_COPROCS
+  struct cpelement *p;
+
+  p = cpl_searchbyname (name);
+  return (p ? p->coproc : 0);
+#else
+  return ((sh_coproc.c_name && STREQ (sh_coproc.c_name, name)) ? &sh_coproc : 0);
+#endif
+}
+
+void
+coproc_init (cp)
+     struct coproc *cp;
+{
+  cp->c_name = 0;
+  cp->c_pid = NO_PID;
+  cp->c_rfd = cp->c_wfd = -1;
+  cp->c_rsave = cp->c_wsave = -1;
+  cp->c_flags = cp->c_status = cp->c_lock = 0;
+}
+
+struct coproc *
+coproc_alloc (name, pid)
+     char *name;
+     pid_t pid;
+{
+  struct coproc *cp;
+
+#if MULTIPLE_COPROCS
+  cp = (struct coproc *)xmalloc (sizeof (struct coproc));
+#else
+  cp = &sh_coproc;
+#endif
+  coproc_init (cp);
+  cp->c_lock = 2;
+
+  cp->c_pid = pid;
+  cp->c_name = savestring (name);
+#if MULTIPLE_COPROCS
+  cpl_add (cp);
+#endif
+  cp->c_lock = 0;
+  return (cp);
+}
+
+static void
+coproc_free (cp)
+     struct coproc *cp;
+{
+  free (cp);
+}
+
+void
+coproc_dispose (cp)
+     struct coproc *cp;
+{
+  sigset_t set, oset;
+
+  if (cp == 0)
+    return;
+
+  BLOCK_SIGNAL (SIGCHLD, set, oset);
+  cp->c_lock = 3;
+  coproc_unsetvars (cp);
+  FREE (cp->c_name);
+  coproc_close (cp);
+#if MULTIPLE_COPROCS
+  coproc_free (cp);
+#else
+  coproc_init (cp);
+  cp->c_lock = 0;
+#endif
+  UNBLOCK_SIGNAL (oset);
+}
+
+/* Placeholder for now.  Will require changes for multiple coprocs */
+void
+coproc_flush ()
+{
+#if MULTIPLE_COPROCS
+  cpl_flush ();
+#else
+  coproc_dispose (&sh_coproc);
+#endif
+}
+
+void
+coproc_close (cp)
+     struct coproc *cp;
+{
+  if (cp->c_rfd >= 0)
+    {
+      close (cp->c_rfd);
+      cp->c_rfd = -1;
+    }
+  if (cp->c_wfd >= 0)
+    {
+      close (cp->c_wfd);
+      cp->c_wfd = -1;
+    }
+  cp->c_rsave = cp->c_wsave = -1;
+}
+
+void
+coproc_closeall ()
+{
+#if MULTIPLE_COPROCS
+  cpl_closeall ();
+#else
+  coproc_close (&sh_coproc);	/* XXX - will require changes for multiple coprocs */
+#endif
+}
+
+void
+coproc_reap ()
+{
+#if MULTIPLE_COPROCS
+  cpl_reap ();
+#else
+  struct coproc *cp;
+
+  cp = &sh_coproc;		/* XXX - will require changes for multiple coprocs */
+  if (cp && (cp->c_flags & COPROC_DEAD))
+    coproc_dispose (cp);
+#endif
+}
+
+void
+coproc_rclose (cp, fd)
+     struct coproc *cp;
+     int fd;
+{
+  if (cp->c_rfd >= 0 && cp->c_rfd == fd)
+    {
+      close (cp->c_rfd);
+      cp->c_rfd = -1;
+    }
+}
+
+void
+coproc_wclose (cp, fd)
+     struct coproc *cp;
+     int fd;
+{
+  if (cp->c_wfd >= 0 && cp->c_wfd == fd)
+    {
+      close (cp->c_wfd);
+      cp->c_wfd = -1;
+    }
+}
+
+void
+coproc_checkfd (cp, fd)
+     struct coproc *cp;
+     int fd;
+{
+  int update;
+
+  update = 0;
+  if (cp->c_rfd >= 0 && cp->c_rfd == fd)
+    update = cp->c_rfd = -1;
+  if (cp->c_wfd >= 0 && cp->c_wfd == fd)
+    update = cp->c_wfd = -1;
+  if (update)
+    coproc_setvars (cp);
+}
+
+void
+coproc_fdchk (fd)
+     int fd;
+{
+#if MULTIPLE_COPROCS
+  cpl_fdchk (fd);
+#else
+  coproc_checkfd (&sh_coproc, fd);
+#endif
+}
+
+void
+coproc_fdclose (cp, fd)
+     struct coproc *cp;
+     int fd;
+{
+  coproc_rclose (cp, fd);
+  coproc_wclose (cp, fd);
+  coproc_setvars (cp);
+}
+
+void
+coproc_fdsave (cp)
+     struct coproc *cp;
+{
+  cp->c_rsave = cp->c_rfd;
+  cp->c_wsave = cp->c_wfd;
+}
+
+void
+coproc_fdrestore (cp)
+     struct coproc *cp;
+{
+  cp->c_rfd = cp->c_rsave;
+  cp->c_wfd = cp->c_wsave;
+}
+
+static void
+coproc_setstatus (cp, status)
+     struct coproc *cp;
+     int status;
+{
+  cp->c_lock = 4;
+  cp->c_status = status;
+  cp->c_flags |= COPROC_DEAD;
+  cp->c_flags &= ~COPROC_RUNNING;
+  /* Don't dispose the coproc or unset the COPROC_XXX variables because
+     this is executed in a signal handler context.  Wait until coproc_reap
+     takes care of it. */
+  cp->c_lock = 0;
+}
+
+void
+coproc_pidchk (pid, status)
+     pid_t pid;
+     int status;
+{
+  struct coproc *cp;
+
+#if MULTIPLE_COPROCS
+  struct cpelement *cpe;
+
+  /* We're not disposing the coproc because this is executed in a signal
+     handler context */
+  cpe = cpl_search (pid);
+  cp = cpe ? cpe->coproc : 0;
+#else
+  cp = getcoprocbypid (pid);
+#endif
+  if (cp)
+    coproc_setstatus (cp, status);
+}
+
+pid_t
+coproc_active ()
+{
+#if MULTIPLE_COPROCS
+  return (cpl_firstactive ());
+#else
+  return ((sh_coproc.c_flags & COPROC_DEAD) ? NO_PID : sh_coproc.c_pid);
+#endif
+}
+void
+coproc_setvars (cp)
+     struct coproc *cp;
+{
+  SHELL_VAR *v;
+  char *namevar, *t;
+  int l;
+  WORD_DESC w;
+#if defined (ARRAY_VARS)
+  arrayind_t ind;
+#endif
+
+  if (cp->c_name == 0)
+    return;
+
+  /* We could do more here but right now we only check the name, warn if it's
+     not a valid identifier, and refuse to create variables with invalid names
+     if a coproc with such a name is supplied. */
+  w.word = cp->c_name;
+  w.flags = 0;
+  if (check_identifier (&w, 1) == 0)
+    return;
+
+  l = strlen (cp->c_name);
+  namevar = xmalloc (l + 16);
+
+#if defined (ARRAY_VARS)
+  v = find_variable (cp->c_name);
+
+  /* This is the same code as in find_or_make_array_variable */
+  if (v == 0)
+    {
+      v = find_variable_nameref_for_create (cp->c_name, 1);
+      if (v == INVALID_NAMEREF_VALUE)
+	{
+	  free (namevar);
+	  return;
+	}
+      if (v && nameref_p (v))
+	{
+	  free (cp->c_name);
+	  cp->c_name = savestring (nameref_cell (v));
+	  v = make_new_array_variable (cp->c_name);	  
+	}
+    }
+
+  if (v && (readonly_p (v) || noassign_p (v)))
+    {
+      if (readonly_p (v))
+	err_readonly (cp->c_name);
+      free (namevar);
+      return;
+    }
+  if (v == 0)
+    v = make_new_array_variable (cp->c_name);
+  if (array_p (v) == 0)
+    v = convert_var_to_array (v);
+
+  t = itos (cp->c_rfd);
+  ind = 0;
+  v = bind_array_variable (cp->c_name, ind, t, 0);
+  free (t);
+
+  t = itos (cp->c_wfd);
+  ind = 1;
+  v = bind_array_variable (cp->c_name, ind, t, 0);
+  free (t);
+#else
+  sprintf (namevar, "%s_READ", cp->c_name);
+  t = itos (cp->c_rfd);
+  bind_variable (namevar, t, 0);
+  free (t);
+  sprintf (namevar, "%s_WRITE", cp->c_name);
+  t = itos (cp->c_wfd);
+  bind_variable (namevar, t, 0);
+  free (t);
+#endif
+
+  sprintf (namevar, "%s_PID", cp->c_name);
+  t = itos (cp->c_pid);
+  v = bind_variable (namevar, t, 0);
+  free (t);
+
+  free (namevar);
+}
+
+void
+coproc_unsetvars (cp)
+     struct coproc *cp;
+{
+  int l;
+  char *namevar;
+
+  if (cp->c_name == 0)
+    return;
+
+  l = strlen (cp->c_name);
+  namevar = xmalloc (l + 16);
+
+  sprintf (namevar, "%s_PID", cp->c_name);
+  unbind_variable_noref (namevar);  
+
+#if defined (ARRAY_VARS)
+  check_unbind_variable (cp->c_name);
+#else
+  sprintf (namevar, "%s_READ", cp->c_name);
+  unbind_variable (namevar);
+  sprintf (namevar, "%s_WRITE", cp->c_name);
+  unbind_variable (namevar);
+#endif  
+
+  free (namevar);
+}
+
+static int
+execute_coproc (command, pipe_in, pipe_out, fds_to_close)
+     COMMAND *command;
+     int pipe_in, pipe_out;
+     struct fd_bitmap *fds_to_close;
+{
+  int rpipe[2], wpipe[2], estat, invert;
+  pid_t coproc_pid;
+  Coproc *cp;
+  char *tcmd, *p, *name;
+  sigset_t set, oset;
+
+  /* XXX -- can be removed after changes to handle multiple coprocs */
+#if !MULTIPLE_COPROCS
+  if (sh_coproc.c_pid != NO_PID && (sh_coproc.c_rfd >= 0 || sh_coproc.c_wfd >= 0))
+    internal_warning (_("execute_coproc: coproc [%d:%s] still exists"), sh_coproc.c_pid, sh_coproc.c_name);
+  coproc_init (&sh_coproc);
+#endif
+
+  invert = (command->flags & CMD_INVERT_RETURN) != 0;
+
+  /* expand name without splitting - could make this dependent on a shopt option */
+  name = expand_string_unsplit_to_string (command->value.Coproc->name, 0);
+  /* Optional check -- could be relaxed */
+  if (legal_identifier (name) == 0)
+    {
+      internal_error (_("`%s': not a valid identifier"), name);
+      return (invert ? EXECUTION_SUCCESS : EXECUTION_FAILURE);
+    }
+  else
+    {
+      free (command->value.Coproc->name);
+      command->value.Coproc->name = name;
+    }
+
+  command_string_index = 0;
+  tcmd = make_command_string (command);
+
+  sh_openpipe ((int *)&rpipe);	/* 0 = parent read, 1 = child write */
+  sh_openpipe ((int *)&wpipe); /* 0 = child read, 1 = parent write */
+
+  BLOCK_SIGNAL (SIGCHLD, set, oset);
+
+  coproc_pid = make_child (p = savestring (tcmd), FORK_ASYNC);
+
+  if (coproc_pid == 0)
+    {
+      close (rpipe[0]);
+      close (wpipe[1]);
+
+#if defined (JOB_CONTROL)
+      FREE (p);
+#endif
+
+      UNBLOCK_SIGNAL (oset);
+      estat = execute_in_subshell (command, 1, wpipe[0], rpipe[1], fds_to_close);
+
+      fflush (stdout);
+      fflush (stderr);
+
+      exit (estat);
+    }
+
+  close (rpipe[1]);
+  close (wpipe[0]);
+
+  cp = coproc_alloc (command->value.Coproc->name, coproc_pid);
+  cp->c_rfd = rpipe[0];
+  cp->c_wfd = wpipe[1];
+
+  cp->c_flags |= COPROC_RUNNING;
+
+  SET_CLOSE_ON_EXEC (cp->c_rfd);
+  SET_CLOSE_ON_EXEC (cp->c_wfd);
+
+  coproc_setvars (cp);
+
+  UNBLOCK_SIGNAL (oset);
+
+#if 0
+  itrace ("execute_coproc (%s): [%d] %s", command->value.Coproc->name, coproc_pid, the_printed_command);
+#endif
+
+  close_pipes (pipe_in, pipe_out);
+#if defined (PROCESS_SUBSTITUTION) && defined (HAVE_DEV_FD)
+  unlink_fifo_list ();
+#endif
+  stop_pipeline (1, (COMMAND *)NULL);
+  DESCRIBE_PID (coproc_pid);
+  run_pending_traps ();
+
+  return (invert ? EXECUTION_FAILURE : EXECUTION_SUCCESS);
+}
+#endif
+
+static void
+restore_stdin (s)
+     int s;
+{
+  dup2 (s, 0);
+  close (s);
+}
+
+/* Catch-all cleanup function for lastpipe code for unwind-protects */
+static void
+lastpipe_cleanup (s)
+     int s;
+{
+  set_jobs_list_frozen (s);
+}
+
+static int
+execute_pipeline (command, asynchronous, pipe_in, pipe_out, fds_to_close)
+     COMMAND *command;
+     int asynchronous, pipe_in, pipe_out;
+     struct fd_bitmap *fds_to_close;
+{
+  int prev, fildes[2], new_bitmap_size, dummyfd, ignore_return, exec_result;
+  int lstdin, lastpipe_flag, lastpipe_jid, old_frozen;
+  COMMAND *cmd;
+  struct fd_bitmap *fd_bitmap;
+  pid_t lastpid;
+
+#if defined (JOB_CONTROL)
+  sigset_t set, oset;
+  BLOCK_CHILD (set, oset);
+#endif /* JOB_CONTROL */
+
+  ignore_return = (command->flags & CMD_IGNORE_RETURN) != 0;
+
+  prev = pipe_in;
+  cmd = command;
+
+  while (cmd && cmd->type == cm_connection &&
+	 cmd->value.Connection && cmd->value.Connection->connector == '|')
+    {
+      /* Make a pipeline between the two commands. */
+      if (pipe (fildes) < 0)
+	{
+	  sys_error (_("pipe error"));
+#if defined (JOB_CONTROL)
+	  terminate_current_pipeline ();
+	  kill_current_pipeline ();
+	  UNBLOCK_CHILD (oset);
+#endif /* JOB_CONTROL */
+	  last_command_exit_value = EXECUTION_FAILURE;
+	  /* The unwind-protects installed below will take care
+	     of closing all of the open file descriptors. */
+	  throw_to_top_level ();
+	  return (EXECUTION_FAILURE);	/* XXX */
+	}
+
+      /* Here is a problem: with the new file close-on-exec
+	 code, the read end of the pipe (fildes[0]) stays open
+	 in the first process, so that process will never get a
+	 SIGPIPE.  There is no way to signal the first process
+	 that it should close fildes[0] after forking, so it
+	 remains open.  No SIGPIPE is ever sent because there
+	 is still a file descriptor open for reading connected
+	 to the pipe.  We take care of that here.  This passes
+	 around a bitmap of file descriptors that must be
+	 closed after making a child process in execute_simple_command. */
+
+      /* We need fd_bitmap to be at least as big as fildes[0].
+	 If fildes[0] is less than fds_to_close->size, then
+	 use fds_to_close->size. */
+      new_bitmap_size = (fildes[0] < fds_to_close->size)
+				? fds_to_close->size
+				: fildes[0] + 8;
+
+      fd_bitmap = new_fd_bitmap (new_bitmap_size);
+
+      /* Now copy the old information into the new bitmap. */
+      xbcopy ((char *)fds_to_close->bitmap, (char *)fd_bitmap->bitmap, fds_to_close->size);
+
+      /* And mark the pipe file descriptors to be closed. */
+      fd_bitmap->bitmap[fildes[0]] = 1;
+
+      /* In case there are pipe or out-of-processes errors, we
+	 want all these file descriptors to be closed when
+	 unwind-protects are run, and the storage used for the
+	 bitmaps freed up. */
+      begin_unwind_frame ("pipe-file-descriptors");
+      add_unwind_protect (dispose_fd_bitmap, fd_bitmap);
+      add_unwind_protect (close_fd_bitmap, fd_bitmap);
+      if (prev >= 0)
+	add_unwind_protect (close, prev);
+      dummyfd = fildes[1];
+      add_unwind_protect (close, dummyfd);
+
+#if defined (JOB_CONTROL)
+      add_unwind_protect (restore_signal_mask, &oset);
+#endif /* JOB_CONTROL */
+
+      if (ignore_return && cmd->value.Connection->first)
+	cmd->value.Connection->first->flags |= CMD_IGNORE_RETURN;
+      execute_command_internal (cmd->value.Connection->first, asynchronous,
+				prev, fildes[1], fd_bitmap);
+
+      if (prev >= 0)
+	close (prev);
+
+      prev = fildes[0];
+      close (fildes[1]);
+
+      dispose_fd_bitmap (fd_bitmap);
+      discard_unwind_frame ("pipe-file-descriptors");
+
+      cmd = cmd->value.Connection->second;
+    }
+
+  lastpid = last_made_pid;
+
+  /* Now execute the rightmost command in the pipeline.  */
+  if (ignore_return && cmd)
+    cmd->flags |= CMD_IGNORE_RETURN;
+
+  lastpipe_flag = 0;
+
+  begin_unwind_frame ("lastpipe-exec");
+  lstdin = -1;
+  /* If the `lastpipe' option is set with shopt, and job control is not
+     enabled, execute the last element of non-async pipelines in the
+     current shell environment. */
+  if (lastpipe_opt && job_control == 0 && asynchronous == 0 && pipe_out == NO_PIPE && prev > 0)
+    {
+      lstdin = move_to_high_fd (0, 1, -1);
+      if (lstdin > 0)
+	{
+	  do_piping (prev, pipe_out);
+	  prev = NO_PIPE;
+	  add_unwind_protect (restore_stdin, lstdin);
+	  lastpipe_flag = 1;
+	  old_frozen = freeze_jobs_list ();
+	  lastpipe_jid = stop_pipeline (0, (COMMAND *)NULL);	/* XXX */
+	  add_unwind_protect (lastpipe_cleanup, old_frozen);
+#if defined (JOB_CONTROL)
+	  UNBLOCK_CHILD (oset);		/* XXX */
+#endif
+	}
+      if (cmd)
+	cmd->flags |= CMD_LASTPIPE;
+    }	  
+  if (prev >= 0)
+    add_unwind_protect (close, prev);
+
+  exec_result = execute_command_internal (cmd, asynchronous, prev, pipe_out, fds_to_close);
+
+  if (lstdin > 0)
+    restore_stdin (lstdin);
+
+  if (prev >= 0)
+    close (prev);
+
+#if defined (JOB_CONTROL)
+  UNBLOCK_CHILD (oset);
+#endif
+
+  QUIT;
+
+  if (lastpipe_flag)
+    {
+#if defined (JOB_CONTROL)
+      if (INVALID_JOB (lastpipe_jid) == 0)
+        {
+          append_process (savestring (the_printed_command_except_trap), dollar_dollar_pid, exec_result, lastpipe_jid);
+          lstdin = wait_for (lastpid, 0);
+        }
+      else
+        lstdin = wait_for_single_pid (lastpid, 0);		/* checks bgpids list */
+#else
+      lstdin = wait_for (lastpid, 0);
+#endif
+
+#if defined (JOB_CONTROL)
+      /* If wait_for removes the job from the jobs table, use result of last
+	 command as pipeline's exit status as usual.  The jobs list can get
+	 frozen and unfrozen at inconvenient times if there are multiple pipelines
+	 running simultaneously. */
+      if (INVALID_JOB (lastpipe_jid) == 0)
+	exec_result = job_exit_status (lastpipe_jid);
+      else if (pipefail_opt)
+	exec_result = exec_result | lstdin;	/* XXX */
+      /* otherwise we use exec_result */
+#endif
+
+      set_jobs_list_frozen (old_frozen);
+    }
+
+  discard_unwind_frame ("lastpipe-exec");
+
+  return (exec_result);
+}
+
+static int
+execute_connection (command, asynchronous, pipe_in, pipe_out, fds_to_close)
+     COMMAND *command;
+     int asynchronous, pipe_in, pipe_out;
+     struct fd_bitmap *fds_to_close;
+{
+  COMMAND *tc, *second;
+  int ignore_return, exec_result, was_error_trap, invert;
+  volatile int save_line_number;
+
+  ignore_return = (command->flags & CMD_IGNORE_RETURN) != 0;
+
+  switch (command->value.Connection->connector)
+    {
+    /* Do the first command asynchronously. */
+    case '&':
+      tc = command->value.Connection->first;
+      if (tc == 0)
+	return (EXECUTION_SUCCESS);
+
+      if (ignore_return)
+	tc->flags |= CMD_IGNORE_RETURN;
+      tc->flags |= CMD_AMPERSAND;
+
+      /* If this shell was compiled without job control support,
+	 if we are currently in a subshell via `( xxx )', or if job
+	 control is not active then the standard input for an
+	 asynchronous command is forced to /dev/null. */
+#if defined (JOB_CONTROL)
+      if ((subshell_environment || !job_control) && !stdin_redir)
+#else
+      if (!stdin_redir)
+#endif /* JOB_CONTROL */
+	tc->flags |= CMD_STDIN_REDIR;
+
+      exec_result = execute_command_internal (tc, 1, pipe_in, pipe_out, fds_to_close);
+      QUIT;
+
+      if (tc->flags & CMD_STDIN_REDIR)
+	tc->flags &= ~CMD_STDIN_REDIR;
+
+      second = command->value.Connection->second;
+      if (second)
+	{
+	  if (ignore_return)
+	    second->flags |= CMD_IGNORE_RETURN;
+
+	  exec_result = execute_command_internal (second, asynchronous, pipe_in, pipe_out, fds_to_close);
+	}
+
+      break;
+
+    /* Just call execute command on both sides. */
+    case ';':
+      if (ignore_return)
+	{
+	  if (command->value.Connection->first)
+	    command->value.Connection->first->flags |= CMD_IGNORE_RETURN;
+	  if (command->value.Connection->second)
+	    command->value.Connection->second->flags |= CMD_IGNORE_RETURN;
+	}
+      executing_list++;
+      QUIT;
+
+#if 1
+      execute_command (command->value.Connection->first);
+#else
+      execute_command_internal (command->value.Connection->first,
+				  asynchronous, pipe_in, pipe_out,
+				  fds_to_close);
+#endif
+
+      QUIT;
+      optimize_fork (command);			/* XXX */
+      exec_result = execute_command_internal (command->value.Connection->second,
+				      asynchronous, pipe_in, pipe_out,
+				      fds_to_close);
+      executing_list--;
+      break;
+
+    case '|':
+      was_error_trap = signal_is_trapped (ERROR_TRAP) && signal_is_ignored (ERROR_TRAP) == 0;
+      invert = (command->flags & CMD_INVERT_RETURN) != 0;
+      ignore_return = (command->flags & CMD_IGNORE_RETURN) != 0;
+
+      line_number_for_err_trap = line_number;	/* XXX - save value? */
+      exec_result = execute_pipeline (command, asynchronous, pipe_in, pipe_out, fds_to_close);
+
+      if (asynchronous)
+	{
+	  exec_result = EXECUTION_SUCCESS;
+	  invert = 0;
+	}
+
+      if (was_error_trap && ignore_return == 0 && invert == 0 && exec_result != EXECUTION_SUCCESS)
+	{
+	  last_command_exit_value = exec_result;
+	  save_line_number = line_number;
+	  line_number = line_number_for_err_trap;
+	  run_error_trap ();
+	  line_number = save_line_number;
+	}
+
+      if (ignore_return == 0 && invert == 0 && exit_immediately_on_error && exec_result != EXECUTION_SUCCESS)
+	{
+	  last_command_exit_value = exec_result;
+	  run_pending_traps ();
+	  jump_to_top_level (ERREXIT);
+	}
+
+      break;
+
+    case AND_AND:
+    case OR_OR:
+      if (asynchronous)
+	{
+	  /* If we have something like `a && b &' or `a || b &', run the
+	     && or || stuff in a subshell.  Force a subshell and just call
+	     execute_command_internal again.  Leave asynchronous on
+	     so that we get a report from the parent shell about the
+	     background job. */
+	  command->flags |= CMD_FORCE_SUBSHELL;
+	  exec_result = execute_command_internal (command, 1, pipe_in, pipe_out, fds_to_close);
+	  break;
+	}
+
+      /* Execute the first command.  If the result of that is successful
+	 and the connector is AND_AND, or the result is not successful
+	 and the connector is OR_OR, then execute the second command,
+	 otherwise return. */
+
+      executing_list++;
+      if (command->value.Connection->first)
+	command->value.Connection->first->flags |= CMD_IGNORE_RETURN;
+
+#if 1
+      exec_result = execute_command (command->value.Connection->first);
+#else
+      exec_result = execute_command_internal (command->value.Connection->first, 0, NO_PIPE, NO_PIPE, fds_to_close);
+#endif
+      QUIT;
+      if (((command->value.Connection->connector == AND_AND) &&
+	   (exec_result == EXECUTION_SUCCESS)) ||
+	  ((command->value.Connection->connector == OR_OR) &&
+	   (exec_result != EXECUTION_SUCCESS)))
+	{
+	  optimize_fork (command);
+
+	  second = command->value.Connection->second;
+	  if (ignore_return && second)
+	    second->flags |= CMD_IGNORE_RETURN;
+
+	  exec_result = execute_command (second);
+	}
+      executing_list--;
+      break;
+
+    default:
+      command_error ("execute_connection", CMDERR_BADCONN, command->value.Connection->connector, 0);
+      jump_to_top_level (DISCARD);
+      exec_result = EXECUTION_FAILURE;
+    }
+
+  return exec_result;
+}
+
+/* The test used to be only for interactive_shell, but we don't want to report
+   job status when the shell is not interactive or when job control isn't
+   enabled. */
+#define REAP() \
+  do \
+    { \
+      if (job_control == 0 || interactive_shell == 0) \
+	reap_dead_jobs (); \
+    } \
+  while (0)
+
+/* Execute a FOR command.  The syntax is: FOR word_desc IN word_list;
+   DO command; DONE */
+static int
+execute_for_command (for_command)
+     FOR_COM *for_command;
+{
+  register WORD_LIST *releaser, *list;
+  SHELL_VAR *v;
+  char *identifier;
+  int retval, save_line_number;
+#if 0
+  SHELL_VAR *old_value = (SHELL_VAR *)NULL; /* Remember the old value of x. */
+#endif
+
+  save_line_number = line_number;
+  if (check_identifier (for_command->name, 1) == 0)
+    {
+      if (posixly_correct && interactive_shell == 0)
+	{
+	  last_command_exit_value = EX_BADUSAGE;
+	  jump_to_top_level (ERREXIT);
+	}
+      return (EXECUTION_FAILURE);
+    }
+
+  loop_level++;
+  identifier = for_command->name->word;
+
+  line_number = for_command->line;	/* for expansion error messages */
+  list = releaser = expand_words_no_vars (for_command->map_list);
+
+  begin_unwind_frame ("for");
+  add_unwind_protect (dispose_words, releaser);
+
+#if 0
+  if (lexical_scoping)
+    {
+      old_value = copy_variable (find_variable (identifier));
+      if (old_value)
+	add_unwind_protect (dispose_variable, old_value);
+    }
+#endif
+
+  if (for_command->flags & CMD_IGNORE_RETURN)
+    for_command->action->flags |= CMD_IGNORE_RETURN;
+
+  for (retval = EXECUTION_SUCCESS; list; list = list->next)
+    {
+      QUIT;
+
+      line_number = for_command->line;
+
+      /* Remember what this command looks like, for debugger. */
+      command_string_index = 0;
+      print_for_command_head (for_command);
+
+      if (echo_command_at_execute)
+	xtrace_print_for_command_head (for_command);
+
+      /* Save this command unless it's a trap command and we're not running
+	 a debug trap. */
+      if (signal_in_progress (DEBUG_TRAP) == 0 && running_trap == 0)
+	{
+	  FREE (the_printed_command_except_trap);
+	  the_printed_command_except_trap = savestring (the_printed_command);
+	}
+
+      retval = run_debug_trap ();
+#if defined (DEBUGGER)
+      /* In debugging mode, if the DEBUG trap returns a non-zero status, we
+	 skip the command. */
+      if (debugging_mode && retval != EXECUTION_SUCCESS)
+        continue;
+#endif
+
+      this_command_name = (char *)NULL;
+      /* XXX - special ksh93 for command index variable handling */
+      v = find_variable_last_nameref (identifier, 1);
+      if (v && nameref_p (v))
+	{
+	  if (valid_nameref_value (list->word->word, 1) == 0)
+	    {
+	      sh_invalidid (list->word->word);
+	      v = 0;
+	    }
+	  else if (readonly_p (v))
+	    err_readonly (name_cell (v));
+	  else
+	    v = bind_variable_value (v, list->word->word, ASS_NAMEREF);
+	}
+      else
+	v = bind_variable (identifier, list->word->word, 0);
+
+      if (v == 0 || readonly_p (v) || noassign_p (v))
+	{
+	  line_number = save_line_number;
+	  if (v && readonly_p (v) && interactive_shell == 0 && posixly_correct)
+	    {
+	      last_command_exit_value = EXECUTION_FAILURE;
+	      jump_to_top_level (FORCE_EOF);
+	    }
+	  else
+	    {
+	      dispose_words (releaser);
+	      discard_unwind_frame ("for");
+	      loop_level--;
+	      return (EXECUTION_FAILURE);
+	    }
+	}
+
+      if (ifsname (identifier))
+	setifs (v);
+      else
+	stupidly_hack_special_variables (identifier);
+
+      retval = execute_command (for_command->action);
+      REAP ();
+      QUIT;
+
+      if (breaking)
+	{
+	  breaking--;
+	  break;
+	}
+
+      if (continuing)
+	{
+	  continuing--;
+	  if (continuing)
+	    break;
+	}
+    }
+
+  loop_level--;
+  line_number = save_line_number;
+
+#if 0
+  if (lexical_scoping)
+    {
+      if (!old_value)
+        unbind_variable (identifier);
+      else
+	{
+	  SHELL_VAR *new_value;
+
+	  new_value = bind_variable (identifier, value_cell (old_value), 0);
+	  new_value->attributes = old_value->attributes;
+	  dispose_variable (old_value);
+	}
+    }
+#endif
+
+  dispose_words (releaser);
+  discard_unwind_frame ("for");
+  return (retval);
+}
+
+#if defined (ARITH_FOR_COMMAND)
+/* Execute an arithmetic for command.  The syntax is
+
+	for (( init ; step ; test ))
+	do
+		body
+	done
+
+   The execution should be exactly equivalent to
+
+	eval \(\( init \)\)
+	while eval \(\( test \)\) ; do
+		body;
+		eval \(\( step \)\)
+	done
+*/
+static intmax_t
+eval_arith_for_expr (l, okp)
+     WORD_LIST *l;
+     int *okp;
+{
+  WORD_LIST *new;
+  intmax_t expresult;
+  int r;
+
+  new = expand_words_no_vars (l);
+  if (new)
+    {
+      if (echo_command_at_execute)
+	xtrace_print_arith_cmd (new);
+      this_command_name = "((";		/* )) for expression error messages */
+
+      command_string_index = 0;
+      print_arith_command (new);
+      if (signal_in_progress (DEBUG_TRAP) == 0 && running_trap == 0)
+	{
+	  FREE (the_printed_command_except_trap);
+	  the_printed_command_except_trap = savestring (the_printed_command);
+	}
+
+      r = run_debug_trap ();
+      /* In debugging mode, if the DEBUG trap returns a non-zero status, we
+	 skip the command. */
+#if defined (DEBUGGER)
+      if (debugging_mode == 0 || r == EXECUTION_SUCCESS)
+	expresult = evalexp (new->word->word, EXP_EXPANDED, okp);
+      else
+	{
+	  expresult = 0;
+	  if (okp)
+	    *okp = 1;
+	}
+#else
+      expresult = evalexp (new->word->word, EXP_EXPANDED, okp);
+#endif
+      dispose_words (new);
+    }
+  else
+    {
+      expresult = 0;
+      if (okp)
+	*okp = 1;
+    }
+  return (expresult);
+}
+
+static int
+execute_arith_for_command (arith_for_command)
+     ARITH_FOR_COM *arith_for_command;
+{
+  intmax_t expresult;
+  int expok, body_status, arith_lineno, save_lineno;
+
+  body_status = EXECUTION_SUCCESS;
+  loop_level++;
+  save_lineno = line_number;
+
+  if (arith_for_command->flags & CMD_IGNORE_RETURN)
+    arith_for_command->action->flags |= CMD_IGNORE_RETURN;
+
+  this_command_name = "((";	/* )) for expression error messages */
+
+  /* save the starting line number of the command so we can reset
+     line_number before executing each expression -- for $LINENO
+     and the DEBUG trap. */
+  line_number = arith_lineno = arith_for_command->line;
+  if (variable_context && interactive_shell && sourcelevel == 0)
+    {
+      /* line numbers in a function start at 1 */
+      line_number -= function_line_number - 1;
+      if (line_number <= 0)
+	line_number = 1;
+    }
+
+  /* Evaluate the initialization expression. */
+  expresult = eval_arith_for_expr (arith_for_command->init, &expok);
+  if (expok == 0)
+    {
+      line_number = save_lineno;
+      return (EXECUTION_FAILURE);
+    }
+
+  while (1)
+    {
+      /* Evaluate the test expression. */
+      line_number = arith_lineno;
+      expresult = eval_arith_for_expr (arith_for_command->test, &expok);
+      line_number = save_lineno;
+
+      if (expok == 0)
+	{
+	  body_status = EXECUTION_FAILURE;
+	  break;
+	}
+      REAP ();
+      if (expresult == 0)
+	break;
+
+      /* Execute the body of the arithmetic for command. */
+      QUIT;
+      body_status = execute_command (arith_for_command->action);
+      QUIT;
+
+      /* Handle any `break' or `continue' commands executed by the body. */
+      if (breaking)
+	{
+	  breaking--;
+	  break;
+	}
+
+      if (continuing)
+	{
+	  continuing--;
+	  if (continuing)
+	    break;
+	}
+
+      /* Evaluate the step expression. */
+      line_number = arith_lineno;
+      expresult = eval_arith_for_expr (arith_for_command->step, &expok);
+      line_number = save_lineno;
+
+      if (expok == 0)
+	{
+	  body_status = EXECUTION_FAILURE;
+	  break;
+	}
+    }
+
+  loop_level--;
+  line_number = save_lineno;
+
+  return (body_status);
+}
+#endif
+
+#if defined (SELECT_COMMAND)
+static int LINES, COLS, tabsize;
+
+#define RP_SPACE ") "
+#define RP_SPACE_LEN 2
+
+/* XXX - does not handle numbers > 1000000 at all. */
+#define NUMBER_LEN(s) \
+((s < 10) ? 1 \
+	  : ((s < 100) ? 2 \
+		      : ((s < 1000) ? 3 \
+				   : ((s < 10000) ? 4 \
+						 : ((s < 100000) ? 5 \
+								: 6)))))
+
+static int
+displen (s)
+     const char *s;
+{
+#if defined (HANDLE_MULTIBYTE)
+  wchar_t *wcstr;
+  size_t slen;
+  int wclen;
+
+  wcstr = 0;
+  slen = mbstowcs (wcstr, s, 0);
+  if (slen == -1)
+    slen = 0;
+  wcstr = (wchar_t *)xmalloc (sizeof (wchar_t) * (slen + 1));
+  mbstowcs (wcstr, s, slen + 1);
+  wclen = wcswidth (wcstr, slen);
+  free (wcstr);
+  return (wclen < 0 ? STRLEN(s) : wclen);
+#else
+  return (STRLEN (s));
+#endif
+}
+
+static int
+print_index_and_element (len, ind, list)
+      int len, ind;
+      WORD_LIST *list;
+{
+  register WORD_LIST *l;
+  register int i;
+
+  if (list == 0)
+    return (0);
+  for (i = ind, l = list; l && --i; l = l->next)
+    ;
+  if (l == 0)		/* don't think this can happen */
+    return (0);
+  fprintf (stderr, "%*d%s%s", len, ind, RP_SPACE, l->word->word);
+  return (displen (l->word->word));
+}
+
+static void
+indent (from, to)
+     int from, to;
+{
+  while (from < to)
+    {
+      if ((to / tabsize) > (from / tabsize))
+	{
+	  putc ('\t', stderr);
+	  from += tabsize - from % tabsize;
+	}
+      else
+	{
+	  putc (' ', stderr);
+	  from++;
+	}
+    }
+}
+
+static void
+print_select_list (list, list_len, max_elem_len, indices_len)
+     WORD_LIST *list;
+     int list_len, max_elem_len, indices_len;
+{
+  int ind, row, elem_len, pos, cols, rows;
+  int first_column_indices_len, other_indices_len;
+
+  if (list == 0)
+    {
+      putc ('\n', stderr);
+      return;
+    }
+
+  cols = max_elem_len ? COLS / max_elem_len : 1;
+  if (cols == 0)
+    cols = 1;
+  rows = list_len ? list_len / cols + (list_len % cols != 0) : 1;
+  cols = list_len ? list_len / rows + (list_len % rows != 0) : 1;
+
+  if (rows == 1)
+    {
+      rows = cols;
+      cols = 1;
+    }
+
+  first_column_indices_len = NUMBER_LEN (rows);
+  other_indices_len = indices_len;
+
+  for (row = 0; row < rows; row++)
+    {
+      ind = row;
+      pos = 0;
+      while (1)
+	{
+	  indices_len = (pos == 0) ? first_column_indices_len : other_indices_len;
+	  elem_len = print_index_and_element (indices_len, ind + 1, list);
+	  elem_len += indices_len + RP_SPACE_LEN;
+	  ind += rows;
+	  if (ind >= list_len)
+	    break;
+	  indent (pos + elem_len, pos + max_elem_len);
+	  pos += max_elem_len;
+	}
+      putc ('\n', stderr);
+    }
+}
+
+/* Print the elements of LIST, one per line, preceded by an index from 1 to
+   LIST_LEN.  Then display PROMPT and wait for the user to enter a number.
+   If the number is between 1 and LIST_LEN, return that selection.  If EOF
+   is read, return a null string.  If a blank line is entered, or an invalid
+   number is entered, the loop is executed again. */
+static char *
+select_query (list, list_len, prompt, print_menu)
+     WORD_LIST *list;
+     int list_len;
+     char *prompt;
+     int print_menu;
+{
+  int max_elem_len, indices_len, len, r, oe;
+  intmax_t reply;
+  WORD_LIST *l;
+  char *repl_string, *t;
+
+  COLS = default_columns ();
+
+#if 0
+  t = get_string_value ("TABSIZE");
+  tabsize = (t && *t) ? atoi (t) : 8;
+  if (tabsize <= 0)
+    tabsize = 8;
+#else
+  tabsize = 8;
+#endif
+
+  max_elem_len = 0;
+  for (l = list; l; l = l->next)
+    {
+      len = displen (l->word->word);
+      if (len > max_elem_len)
+	max_elem_len = len;
+    }
+  indices_len = NUMBER_LEN (list_len);
+  max_elem_len += indices_len + RP_SPACE_LEN + 2;
+
+  while (1)
+    {
+      if (print_menu)
+	print_select_list (list, list_len, max_elem_len, indices_len);
+      fprintf (stderr, "%s", prompt);
+      fflush (stderr);
+      QUIT;
+
+      oe = executing_builtin;
+      executing_builtin = 1;
+      r = read_builtin ((WORD_LIST *)NULL);
+      executing_builtin = oe;
+      if (r != EXECUTION_SUCCESS)
+	{
+	  putchar ('\n');
+	  return ((char *)NULL);
+	}
+      repl_string = get_string_value ("REPLY");
+      if (repl_string == 0)
+	return ((char *)NULL);
+      if (*repl_string == 0)
+	{
+	  print_menu = 1;
+	  continue;
+	}
+      if (legal_number (repl_string, &reply) == 0)
+	return "";
+      if (reply < 1 || reply > list_len)
+	return "";
+
+      for (l = list; l && --reply; l = l->next)
+	;
+      return (l->word->word);		/* XXX - can't be null? */
+    }
+}
+
+/* Execute a SELECT command.  The syntax is:
+   SELECT word IN list DO command_list DONE
+   Only `break' or `return' in command_list will terminate
+   the command. */
+static int
+execute_select_command (select_command)
+     SELECT_COM *select_command;
+{
+  WORD_LIST *releaser, *list;
+  SHELL_VAR *v;
+  char *identifier, *ps3_prompt, *selection;
+  int retval, list_len, show_menu, save_line_number;
+
+  if (check_identifier (select_command->name, 1) == 0)
+    return (EXECUTION_FAILURE);
+
+  save_line_number = line_number;
+  line_number = select_command->line;
+
+  command_string_index = 0;
+  print_select_command_head (select_command);
+
+  if (echo_command_at_execute)
+    xtrace_print_select_command_head (select_command);
+
+#if 0
+  if (signal_in_progress (DEBUG_TRAP) == 0 && (this_command_name == 0 || (STREQ (this_command_name, "trap") == 0)))
+#else
+  if (signal_in_progress (DEBUG_TRAP) == 0 && running_trap == 0)
+#endif
+    {
+      FREE (the_printed_command_except_trap);
+      the_printed_command_except_trap = savestring (the_printed_command);
+    }
+
+  retval = run_debug_trap ();
+#if defined (DEBUGGER)
+  /* In debugging mode, if the DEBUG trap returns a non-zero status, we
+     skip the command. */
+  if (debugging_mode && retval != EXECUTION_SUCCESS)
+    return (EXECUTION_SUCCESS);
+#endif
+
+  loop_level++;
+  identifier = select_command->name->word;
+
+  /* command and arithmetic substitution, parameter and variable expansion,
+     word splitting, pathname expansion, and quote removal. */
+  list = releaser = expand_words_no_vars (select_command->map_list);
+  list_len = list_length (list);
+  if (list == 0 || list_len == 0)
+    {
+      if (list)
+	dispose_words (list);
+      line_number = save_line_number;
+      return (EXECUTION_SUCCESS);
+    }
+
+  begin_unwind_frame ("select");
+  add_unwind_protect (dispose_words, releaser);
+
+  if (select_command->flags & CMD_IGNORE_RETURN)
+    select_command->action->flags |= CMD_IGNORE_RETURN;
+
+  retval = EXECUTION_SUCCESS;
+  show_menu = 1;
+
+  while (1)
+    {
+      line_number = select_command->line;
+      ps3_prompt = get_string_value ("PS3");
+      if (ps3_prompt == 0)
+	ps3_prompt = "#? ";
+
+      QUIT;
+      selection = select_query (list, list_len, ps3_prompt, show_menu);
+      QUIT;
+      if (selection == 0)
+	{
+	  /* select_query returns EXECUTION_FAILURE if the read builtin
+	     fails, so we want to return failure in this case. */
+	  retval = EXECUTION_FAILURE;
+	  break;
+	}
+
+      v = bind_variable (identifier, selection, 0);
+      if (v == 0 || readonly_p (v) || noassign_p (v))
+	{
+	  if (v && readonly_p (v) && interactive_shell == 0 && posixly_correct)
+	    {
+	      last_command_exit_value = EXECUTION_FAILURE;
+	      jump_to_top_level (FORCE_EOF);
+	    }
+	  else
+	    {
+	      dispose_words (releaser);
+	      discard_unwind_frame ("select");
+	      loop_level--;
+	      line_number = save_line_number;
+	      return (EXECUTION_FAILURE);
+	    }
+	}
+
+      stupidly_hack_special_variables (identifier);
+
+      retval = execute_command (select_command->action);
+
+      REAP ();
+      QUIT;
+
+      if (breaking)
+	{
+	  breaking--;
+	  break;
+	}
+
+      if (continuing)
+	{
+	  continuing--;
+	  if (continuing)
+	    break;
+	}
+
+#if defined (KSH_COMPATIBLE_SELECT)
+      show_menu = 0;
+      selection = get_string_value ("REPLY");
+      if (selection && *selection == '\0')
+        show_menu = 1;
+#endif
+    }
+
+  loop_level--;
+  line_number = save_line_number;
+
+  dispose_words (releaser);
+  discard_unwind_frame ("select");
+  return (retval);
+}
+#endif /* SELECT_COMMAND */
+
+/* Execute a CASE command.  The syntax is: CASE word_desc IN pattern_list ESAC.
+   The pattern_list is a linked list of pattern clauses; each clause contains
+   some patterns to compare word_desc against, and an associated command to
+   execute. */
+static int
+execute_case_command (case_command)
+     CASE_COM *case_command;
+{
+  register WORD_LIST *list;
+  WORD_LIST *wlist, *es;
+  PATTERN_LIST *clauses;
+  char *word, *pattern;
+  int retval, match, ignore_return, save_line_number, qflags;
+
+  save_line_number = line_number;
+  line_number = case_command->line;
+
+  command_string_index = 0;
+  print_case_command_head (case_command);
+
+  if (echo_command_at_execute)
+    xtrace_print_case_command_head (case_command);
+
+#if 0
+  if (signal_in_progress (DEBUG_TRAP) == 0 && (this_command_name == 0 || (STREQ (this_command_name, "trap") == 0)))
+#else
+  if (signal_in_progress (DEBUG_TRAP) == 0 && running_trap == 0)
+#endif
+    {
+      FREE (the_printed_command_except_trap);
+      the_printed_command_except_trap = savestring (the_printed_command);
+    }
+
+  retval = run_debug_trap();
+#if defined (DEBUGGER)
+  /* In debugging mode, if the DEBUG trap returns a non-zero status, we
+     skip the command. */
+  if (debugging_mode && retval != EXECUTION_SUCCESS)
+    {
+      line_number = save_line_number;
+      return (EXECUTION_SUCCESS);
+    }
+#endif
+
+  /* Use the same expansions (the ones POSIX specifies) as the patterns;
+     dequote the resulting string (as POSIX specifies) since the quotes in
+     patterns are handled specially below. We have to do it in this order
+     because we're not supposed to perform word splitting. */
+  wlist = expand_word_leave_quoted (case_command->word, 0);
+  if (wlist)
+    {
+      char *t;
+      t = string_list (wlist);
+      word = dequote_string (t);
+      free (t);
+    }
+  else
+    word = savestring ("");
+  dispose_words (wlist);
+
+  retval = EXECUTION_SUCCESS;
+  ignore_return = case_command->flags & CMD_IGNORE_RETURN;
+
+  begin_unwind_frame ("case");
+  add_unwind_protect (xfree, word);
+
+#define EXIT_CASE()  goto exit_case_command
+
+  for (clauses = case_command->clauses; clauses; clauses = clauses->next)
+    {
+      QUIT;
+      for (list = clauses->patterns; list; list = list->next)
+	{
+	  es = expand_word_leave_quoted (list->word, 0);
+
+	  if (es && es->word && es->word->word && *(es->word->word))
+	    {
+	      /* Convert quoted null strings into empty strings. */
+	      qflags = QGLOB_CVTNULL;
+
+	      /* We left CTLESC in place quoting CTLESC and CTLNUL after the
+	      	 call to expand_word_leave_quoted; tell quote_string_for_globbing
+	      	 to remove those here. This works for both unquoted portions of
+		 the word (which call quote_escapes) and quoted portions
+		 (which call quote_string). */
+	      qflags |= QGLOB_CTLESC;
+	      pattern = quote_string_for_globbing (es->word->word, qflags);
+	    }
+	  else
+	    {
+	      pattern = (char *)xmalloc (1);
+	      pattern[0] = '\0';
+	    }
+
+	  /* Since the pattern does not undergo quote removal (as per
+	     Posix.2, section 3.9.4.3), the strmatch () call must be able
+	     to recognize backslashes as escape characters. */
+	  match = strmatch (pattern, word, FNMATCH_EXTFLAG|FNMATCH_IGNCASE) != FNM_NOMATCH;
+	  free (pattern);
+
+	  dispose_words (es);
+
+	  if (match)
+	    {
+	      do
+		{
+		  if (clauses->action && ignore_return)
+		    clauses->action->flags |= CMD_IGNORE_RETURN;
+		  retval = execute_command (clauses->action);
+		}
+	      while ((clauses->flags & CASEPAT_FALLTHROUGH) && (clauses = clauses->next));
+	      if (clauses == 0 || (clauses->flags & CASEPAT_TESTNEXT) == 0)
+		EXIT_CASE ();
+	      else
+		break;
+	    }
+
+	  QUIT;
+	}
+    }
+
+exit_case_command:
+  free (word);
+  discard_unwind_frame ("case");
+  line_number = save_line_number;
+  return (retval);
+}
+
+#define CMD_WHILE 0
+#define CMD_UNTIL 1
+
+/* The WHILE command.  Syntax: WHILE test DO action; DONE.
+   Repeatedly execute action while executing test produces
+   EXECUTION_SUCCESS. */
+static int
+execute_while_command (while_command)
+     WHILE_COM *while_command;
+{
+  return (execute_while_or_until (while_command, CMD_WHILE));
+}
+
+/* UNTIL is just like WHILE except that the test result is negated. */
+static int
+execute_until_command (while_command)
+     WHILE_COM *while_command;
+{
+  return (execute_while_or_until (while_command, CMD_UNTIL));
+}
+
+/* The body for both while and until.  The only difference between the
+   two is that the test value is treated differently.  TYPE is
+   CMD_WHILE or CMD_UNTIL.  The return value for both commands should
+   be EXECUTION_SUCCESS if no commands in the body are executed, and
+   the status of the last command executed in the body otherwise. */
+static int
+execute_while_or_until (while_command, type)
+     WHILE_COM *while_command;
+     int type;
+{
+  int return_value, body_status;
+
+  body_status = EXECUTION_SUCCESS;
+  loop_level++;
+
+  while_command->test->flags |= CMD_IGNORE_RETURN;
+  if (while_command->flags & CMD_IGNORE_RETURN)
+    while_command->action->flags |= CMD_IGNORE_RETURN;
+
+  while (1)
+    {
+      return_value = execute_command (while_command->test);
+      REAP ();
+
+      /* Need to handle `break' in the test when we would break out of the
+         loop.  The job control code will set `breaking' to loop_level
+         when a job in a loop is stopped with SIGTSTP.  If the stopped job
+         is in the loop test, `breaking' will not be reset unless we do
+         this, and the shell will cease to execute commands.  The same holds
+         true for `continue'. */
+      if (type == CMD_WHILE && return_value != EXECUTION_SUCCESS)
+	{
+	  if (breaking)
+	    breaking--;
+	  if (continuing)
+	    continuing--;
+	  break;
+	}
+      if (type == CMD_UNTIL && return_value == EXECUTION_SUCCESS)
+	{
+	  if (breaking)
+	    breaking--;
+	  if (continuing)
+	    continuing--;
+	  break;
+	}
+
+      QUIT;
+      body_status = execute_command (while_command->action);
+      QUIT;
+
+      if (breaking)
+	{
+	  breaking--;
+	  break;
+	}
+
+      if (continuing)
+	{
+	  continuing--;
+	  if (continuing)
+	    break;
+	}
+    }
+  loop_level--;
+
+  return (body_status);
+}
+
+/* IF test THEN command [ELSE command].
+   IF also allows ELIF in the place of ELSE IF, but
+   the parser makes *that* stupidity transparent. */
+static int
+execute_if_command (if_command)
+     IF_COM *if_command;
+{
+  int return_value, save_line_number;
+
+  save_line_number = line_number;
+  if_command->test->flags |= CMD_IGNORE_RETURN;
+  return_value = execute_command (if_command->test);
+  line_number = save_line_number;
+
+  if (return_value == EXECUTION_SUCCESS)
+    {
+      QUIT;
+
+      if (if_command->true_case && (if_command->flags & CMD_IGNORE_RETURN))
+	if_command->true_case->flags |= CMD_IGNORE_RETURN;
+
+      return (execute_command (if_command->true_case));
+    }
+  else
+    {
+      QUIT;
+
+      if (if_command->false_case && (if_command->flags & CMD_IGNORE_RETURN))
+	if_command->false_case->flags |= CMD_IGNORE_RETURN;
+
+      return (execute_command (if_command->false_case));
+    }
+}
+
+#if defined (DPAREN_ARITHMETIC)
+static int
+execute_arith_command (arith_command)
+     ARITH_COM *arith_command;
+{
+  int expok, save_line_number, retval;
+  intmax_t expresult;
+  WORD_LIST *new;
+  char *exp, *t;
+
+  expresult = 0;
+
+  save_line_number = line_number;
+  this_command_name = "((";	/* )) */
+  line_number_for_err_trap = line_number = arith_command->line;
+  /* If we're in a function, update the line number information. */
+  if (variable_context && interactive_shell && sourcelevel == 0)
+    {
+      /* line numbers in a function start at 1 */
+      line_number -= function_line_number - 1;
+      if (line_number <= 0)
+	line_number = 1;
+    }      
+
+  command_string_index = 0;
+  print_arith_command (arith_command->exp);
+
+  if (signal_in_progress (DEBUG_TRAP) == 0 && running_trap == 0)
+    {
+      FREE (the_printed_command_except_trap);
+      the_printed_command_except_trap = savestring (the_printed_command);
+    }
+
+  /* Run the debug trap before each arithmetic command, but do it after we
+     update the line number information and before we expand the various
+     words in the expression. */
+  retval = run_debug_trap ();
+#if defined (DEBUGGER)
+  /* In debugging mode, if the DEBUG trap returns a non-zero status, we
+     skip the command. */
+  if (debugging_mode && retval != EXECUTION_SUCCESS)
+    {
+      line_number = save_line_number;
+      return (EXECUTION_SUCCESS);
+    }
+#endif
+
+  t = (char *)NULL;
+  new = arith_command->exp;
+  if (new->next)
+    exp = t = string_list (new);	/* just in case */
+  else
+    exp = new->word->word;
+
+  exp = expand_arith_string (exp, Q_DOUBLE_QUOTES|Q_ARITH);
+
+  /* If we're tracing, make a new word list with `((' at the front and `))'
+     at the back and print it. Change xtrace_print_arith_cmd to take a string
+     when I change eval_arith_for_expr to use expand_arith_string(). */
+  if (echo_command_at_execute)
+    {
+      new = make_word_list (make_word (exp ? exp : ""), (WORD_LIST *)NULL);
+      xtrace_print_arith_cmd (new);
+      dispose_words (new);
+    }
+
+  if (exp)
+    {
+      expresult = evalexp (exp, EXP_EXPANDED, &expok);
+      line_number = save_line_number;
+      free (exp);
+    }
+  else
+    {
+      expresult = 0;
+      expok = 1;
+    }
+  FREE (t);
+
+  if (expok == 0)
+    return (EXECUTION_FAILURE);
+
+  return (expresult == 0 ? EXECUTION_FAILURE : EXECUTION_SUCCESS);
+}
+#endif /* DPAREN_ARITHMETIC */
+
+#if defined (COND_COMMAND)
+
+static char * const nullstr = "";
+
+/* XXX - can COND ever be NULL when this is called? */
+static int
+execute_cond_node (cond)
+     COND_COM *cond;
+{
+  int result, invert, patmatch, rmatch, mflags, ignore;
+  char *arg1, *arg2;
+#if 0
+  char *t1, *t2;
+#endif
+
+  invert = (cond->flags & CMD_INVERT_RETURN);
+  ignore = (cond->flags & CMD_IGNORE_RETURN);
+  if (ignore)
+    {
+      if (cond->left)
+	cond->left->flags |= CMD_IGNORE_RETURN;
+      if (cond->right)
+	cond->right->flags |= CMD_IGNORE_RETURN;
+    }
+      
+  if (cond->type == COND_EXPR)
+    result = execute_cond_node (cond->left);
+  else if (cond->type == COND_OR)
+    {
+      result = execute_cond_node (cond->left);
+      if (result != EXECUTION_SUCCESS)
+	result = execute_cond_node (cond->right);
+    }
+  else if (cond->type == COND_AND)
+    {
+      result = execute_cond_node (cond->left);
+      if (result == EXECUTION_SUCCESS)
+	result = execute_cond_node (cond->right);
+    }
+  else if (cond->type == COND_UNARY)
+    {
+      if (ignore)
+	comsub_ignore_return++;
+      arg1 = cond_expand_word (cond->left->op, 0);
+      if (ignore)
+	comsub_ignore_return--;
+      if (arg1 == 0)
+	arg1 = nullstr;
+      if (echo_command_at_execute)
+	xtrace_print_cond_term (cond->type, invert, cond->op, arg1, (char *)NULL);
+      result = unary_test (cond->op->word, arg1) ? EXECUTION_SUCCESS : EXECUTION_FAILURE;
+      if (arg1 != nullstr)
+	free (arg1);
+    }
+  else if (cond->type == COND_BINARY)
+    {
+      rmatch = 0;
+      patmatch = (((cond->op->word[1] == '=') && (cond->op->word[2] == '\0') &&
+		   (cond->op->word[0] == '!' || cond->op->word[0] == '=')) ||
+		  (cond->op->word[0] == '=' && cond->op->word[1] == '\0'));
+#if defined (COND_REGEXP)
+      rmatch = (cond->op->word[0] == '=' && cond->op->word[1] == '~' &&
+		cond->op->word[2] == '\0');
+#endif
+
+      if (ignore)
+	comsub_ignore_return++;
+      arg1 = cond_expand_word (cond->left->op, 0);
+      if (ignore)
+	comsub_ignore_return--;
+      if (arg1 == 0)
+	arg1 = nullstr;
+      if (ignore)
+	comsub_ignore_return++;
+      arg2 = cond_expand_word (cond->right->op,
+			       (rmatch && shell_compatibility_level > 31) ? 2 : (patmatch ? 1 : 0));
+      if (ignore)
+	comsub_ignore_return--;
+      if (arg2 == 0)
+	arg2 = nullstr;
+
+      if (echo_command_at_execute)
+	xtrace_print_cond_term (cond->type, invert, cond->op, arg1, arg2);
+
+#if defined (COND_REGEXP)
+      if (rmatch)
+	{
+	  mflags = SHMAT_PWARN;
+#if defined (ARRAY_VARS)
+	  mflags |= SHMAT_SUBEXP;
+#endif
+
+#if 0
+	  t1 = strescape(arg1);
+	  t2 = strescape(arg2);
+	  itrace("execute_cond_node: sh_regmatch on `%s' and `%s'", t1, t2);
+	  free(t1);
+	  free(t2);
+#endif
+
+	  result = sh_regmatch (arg1, arg2, mflags);
+	}
+      else
+#endif /* COND_REGEXP */
+	{
+	  int oe;
+	  oe = extended_glob;
+	  extended_glob = 1;
+	  result = binary_test (cond->op->word, arg1, arg2, TEST_PATMATCH|TEST_ARITHEXP|TEST_LOCALE)
+				  ? EXECUTION_SUCCESS
+				  : EXECUTION_FAILURE;
+	  extended_glob = oe;
+	}
+      if (arg1 != nullstr)
+	free (arg1);
+      if (arg2 != nullstr)
+	free (arg2);
+    }
+  else
+    {
+      command_error ("execute_cond_node", CMDERR_BADTYPE, cond->type, 0);
+      jump_to_top_level (DISCARD);
+      result = EXECUTION_FAILURE;
+    }
+
+  if (invert)
+    result = (result == EXECUTION_SUCCESS) ? EXECUTION_FAILURE : EXECUTION_SUCCESS;
+
+  return result;
+}
+
+static int
+execute_cond_command (cond_command)
+     COND_COM *cond_command;
+{
+  int retval, save_line_number;
+
+  save_line_number = line_number;
+
+  this_command_name = "[[";
+  line_number_for_err_trap = line_number = cond_command->line;
+  /* If we're in a function, update the line number information. */
+  if (variable_context && interactive_shell && sourcelevel == 0)
+    {
+      /* line numbers in a function start at 1 */
+      line_number -= function_line_number - 1;
+      if (line_number <= 0)
+	line_number = 1;
+    }
+  command_string_index = 0;
+  print_cond_command (cond_command);
+
+  if (signal_in_progress (DEBUG_TRAP) == 0 && running_trap == 0)
+    {
+      FREE (the_printed_command_except_trap);
+      the_printed_command_except_trap = savestring (the_printed_command);
+    }
+
+  /* Run the debug trap before each conditional command, but do it after we
+     update the line number information. */
+  retval = run_debug_trap ();
+#if defined (DEBUGGER)
+  /* In debugging mode, if the DEBUG trap returns a non-zero status, we
+     skip the command. */
+  if (debugging_mode && retval != EXECUTION_SUCCESS)
+    {
+      line_number = save_line_number;
+      return (EXECUTION_SUCCESS);
+    }
+#endif
+
+#if 0
+  debug_print_cond_command (cond_command);
+#endif
+
+  last_command_exit_value = retval = execute_cond_node (cond_command);
+  line_number = save_line_number;
+  return (retval);
+}
+#endif /* COND_COMMAND */
+
+static void
+bind_lastarg (arg)
+     char *arg;
+{
+  SHELL_VAR *var;
+
+  if (arg == 0)
+    arg = "";
+  var = bind_variable ("_", arg, 0);
+  if (var)
+    VUNSETATTR (var, att_exported);
+}
+
+/* Execute a null command.  Fork a subshell if the command uses pipes or is
+   to be run asynchronously.  This handles all the side effects that are
+   supposed to take place. */
+static int
+execute_null_command (redirects, pipe_in, pipe_out, async)
+     REDIRECT *redirects;
+     int pipe_in, pipe_out, async;
+{
+  int r;
+  int forcefork, fork_flags;
+  REDIRECT *rd;
+
+  for (forcefork = 0, rd = redirects; rd; rd = rd->next)
+    {
+      forcefork += rd->rflags & REDIR_VARASSIGN;
+      /* Safety */
+      forcefork += (rd->redirector.dest == 0 || fd_is_bash_input (rd->redirector.dest)) && (INPUT_REDIRECT (rd->instruction) || TRANSLATE_REDIRECT (rd->instruction) || rd->instruction == r_close_this);
+    }
+
+  if (forcefork || pipe_in != NO_PIPE || pipe_out != NO_PIPE || async)
+    {
+      /* We have a null command, but we really want a subshell to take
+	 care of it.  Just fork, do piping and redirections, and exit. */
+      fork_flags = async ? FORK_ASYNC : 0;
+      if (make_child ((char *)NULL, fork_flags) == 0)
+	{
+	  /* Cancel traps, in trap.c. */
+	  restore_original_signals ();		/* XXX */
+
+	  do_piping (pipe_in, pipe_out);
+
+#if defined (COPROCESS_SUPPORT)
+	  coproc_closeall ();
+#endif
+
+	  interactive = 0;			/* XXX */
+
+	  subshell_environment = 0;
+	  if (async)
+	    subshell_environment |= SUBSHELL_ASYNC;
+	  if (pipe_in != NO_PIPE || pipe_out != NO_PIPE)
+	    subshell_environment |= SUBSHELL_PIPE;
+
+	  if (do_redirections (redirects, RX_ACTIVE) == 0)
+	    exit (EXECUTION_SUCCESS);
+	  else
+	    exit (EXECUTION_FAILURE);
+	}
+      else
+	{
+	  close_pipes (pipe_in, pipe_out);
+#if defined (PROCESS_SUBSTITUTION) && defined (HAVE_DEV_FD)
+	  if (pipe_out == NO_PIPE)
+	    unlink_fifo_list ();
+#endif
+	  return (EXECUTION_SUCCESS);
+	}
+    }
+  else
+    {
+      /* Even if there aren't any command names, pretend to do the
+	 redirections that are specified.  The user expects the side
+	 effects to take place.  If the redirections fail, then return
+	 failure.  Otherwise, if a command substitution took place while
+	 expanding the command or a redirection, return the value of that
+	 substitution.  Otherwise, return EXECUTION_SUCCESS. */
+
+      r = do_redirections (redirects, RX_ACTIVE|RX_UNDOABLE);
+      cleanup_redirects (redirection_undo_list);
+      redirection_undo_list = (REDIRECT *)NULL;
+
+      if (r != 0)
+	return (EXECUTION_FAILURE);
+      else if (last_command_subst_pid != NO_PID)
+	return (last_command_exit_value);
+      else
+	return (EXECUTION_SUCCESS);
+    }
+}
+
+/* This is a hack to suppress word splitting for assignment statements
+   given as arguments to builtins with the ASSIGNMENT_BUILTIN flag set. */
+static void
+fix_assignment_words (words)
+     WORD_LIST *words;
+{
+  WORD_LIST *w, *wcmd;
+  struct builtin *b;
+  int assoc, global, array, integer;
+
+  if (words == 0)
+    return;
+
+  b = 0;
+  assoc = global = array = integer = 0;
+
+  /* Skip over assignment statements preceding a command name */
+  wcmd = words;
+  for (wcmd = words; wcmd; wcmd = wcmd->next)
+    if ((wcmd->word->flags & W_ASSIGNMENT) == 0)
+      break;
+  /* Posix (post-2008) says that `command' doesn't change whether
+     or not the builtin it shadows is a `declaration command', even
+     though it removes other special builtin properties.  In Posix
+     mode, we skip over one or more instances of `command' and
+     deal with the next word as the assignment builtin. */
+  while (posixly_correct && wcmd && wcmd->word && wcmd->word->word && STREQ (wcmd->word->word, "command"))
+    wcmd = wcmd->next;
+
+  for (w = wcmd; w; w = w->next)
+    if (w->word->flags & W_ASSIGNMENT)
+      {
+      	/* Lazy builtin lookup, only do it if we find an assignment */
+	if (b == 0)
+	  {
+	    b = builtin_address_internal (wcmd->word->word, 0);
+	    if (b == 0 || (b->flags & ASSIGNMENT_BUILTIN) == 0)
+	      return;
+	    else if (b && (b->flags & ASSIGNMENT_BUILTIN))
+	      wcmd->word->flags |= W_ASSNBLTIN;
+	  }
+	w->word->flags |= (W_NOSPLIT|W_NOGLOB|W_TILDEEXP|W_ASSIGNARG);
+#if defined (ARRAY_VARS)
+	if (assoc)
+	  w->word->flags |= W_ASSIGNASSOC;
+	if (array)
+	  w->word->flags |= W_ASSIGNARRAY;
+#endif
+	if (global)
+	  w->word->flags |= W_ASSNGLOBAL;
+
+	/* If we have an assignment builtin that does not create local variables,
+	   make sure we create global variables even if we internally call
+	   `declare'.  The CHKLOCAL flag means to set attributes or values on
+	   an existing local variable, if there is one. */
+	if (b && ((b->flags & (ASSIGNMENT_BUILTIN|LOCALVAR_BUILTIN)) == ASSIGNMENT_BUILTIN))
+	  w->word->flags |= W_ASSNGLOBAL|W_CHKLOCAL;
+	else if (b && (b->flags & ASSIGNMENT_BUILTIN) && (b->flags & LOCALVAR_BUILTIN) && variable_context)
+	  w->word->flags |= W_FORCELOCAL;
+      }
+#if defined (ARRAY_VARS)
+    /* Note that we saw an associative array option to a builtin that takes
+       assignment statements.  This is a bit of a kludge. */
+    else if (w->word->word[0] == '-' && (strpbrk (w->word->word+1, "Aag") != 0))
+#else
+    else if (w->word->word[0] == '-' && strchr (w->word->word+1, 'g'))
+#endif
+      {
+	if (b == 0)
+	  {
+	    b = builtin_address_internal (wcmd->word->word, 0);
+	    if (b == 0 || (b->flags & ASSIGNMENT_BUILTIN) == 0)
+	      return;
+	    else if (b && (b->flags & ASSIGNMENT_BUILTIN))
+	      wcmd->word->flags |= W_ASSNBLTIN;
+	  }
+	if ((wcmd->word->flags & W_ASSNBLTIN) && strchr (w->word->word+1, 'A'))
+	  assoc = 1;
+	else if ((wcmd->word->flags & W_ASSNBLTIN) && strchr (w->word->word+1, 'a'))
+	  array = 1;
+	if ((wcmd->word->flags & W_ASSNBLTIN) && strchr (w->word->word+1, 'g'))
+	  global = 1;
+      }
+}
+
+#ifndef ISOPTION
+#  define ISOPTION(s, c)  (s[0] == '-' && s[1] == c && s[2] == 0)
+#endif
+
+#define RETURN_NOT_COMMAND() \
+  do { if (typep) *typep = 0; return words; } while (0)
+
+/* Make sure we have `command [-p] command_name [args]', and handle skipping
+   over the usual `--' that ends the options.  Returns the updated WORDS with
+   the command and options stripped and sets *TYPEP to a non-zero value. If
+   any other options are supplied, or there is not a command_name, we punt
+   and return a zero value in *TYPEP without updating WORDS. */
+static WORD_LIST *
+check_command_builtin (words, typep)
+     WORD_LIST *words;
+     int *typep;
+{
+  int type;
+  WORD_LIST *w;
+
+  w = words->next;
+  type = 1;
+
+  if (w && ISOPTION (w->word->word, 'p'))	/* command -p */
+    {
+#if defined (RESTRICTED_SHELL)
+      if (restricted)
+        RETURN_NOT_COMMAND();
+#endif
+      w = w->next;
+      type = 2;
+    }
+
+  if (w && ISOPTION (w->word->word, '-'))	/* command [-p] -- */
+    w = w->next;
+  else if (w && w->word->word[0] == '-')	/* any other option */
+    RETURN_NOT_COMMAND();
+
+  if (w == 0 || w->word->word == 0)		/* must have a command_name */
+    RETURN_NOT_COMMAND();
+
+  if (typep)
+    *typep = type;
+  return w;
+}
+
+/* Return 1 if the file found by searching $PATH for PATHNAME, defaulting
+   to PATHNAME, is a directory.  Used by the autocd code below. */
+static int
+is_dirname (pathname)
+     char *pathname;
+{
+  char *temp;
+  int ret;
+
+  temp = search_for_command (pathname, 0);
+  ret = temp ? file_isdir (temp) : file_isdir (pathname);
+  free (temp);
+  return ret;
+}
+
+/* The meaty part of all the executions.  We have to start hacking the
+   real execution of commands here.  Fork a process, set things up,
+   execute the command. */
+static int
+execute_simple_command (simple_command, pipe_in, pipe_out, async, fds_to_close)
+     SIMPLE_COM *simple_command;
+     int pipe_in, pipe_out, async;
+     struct fd_bitmap *fds_to_close;
+{
+  WORD_LIST *words, *lastword;
+  char *command_line, *lastarg, *temp;
+  int first_word_quoted, result, builtin_is_special, already_forked, dofork;
+  int fork_flags, cmdflags;
+  pid_t old_last_async_pid;
+  sh_builtin_func_t *builtin;
+  SHELL_VAR *func;
+  volatile int old_builtin, old_command_builtin;
+
+  result = EXECUTION_SUCCESS;
+  special_builtin_failed = builtin_is_special = 0;
+  command_line = (char *)0;
+
+  QUIT;
+
+  /* If we're in a function, update the line number information. */
+  if (variable_context && interactive_shell && sourcelevel == 0)
+    {
+      /* line numbers in a function start at 1 */
+      line_number -= function_line_number - 1;
+      if (line_number <= 0)
+	line_number = 1;
+    }
+
+  /* Remember what this command line looks like at invocation. */
+  command_string_index = 0;
+  print_simple_command (simple_command);
+
+#if 0
+  if (signal_in_progress (DEBUG_TRAP) == 0 && (this_command_name == 0 || (STREQ (this_command_name, "trap") == 0)))
+#else
+  if (signal_in_progress (DEBUG_TRAP) == 0 && running_trap == 0)
+#endif
+    {
+      FREE (the_printed_command_except_trap);
+      the_printed_command_except_trap = the_printed_command ? savestring (the_printed_command) : (char *)0;
+    }
+
+  /* Run the debug trap before each simple command, but do it after we
+     update the line number information. */
+  result = run_debug_trap ();
+#if defined (DEBUGGER)
+  /* In debugging mode, if the DEBUG trap returns a non-zero status, we
+     skip the command. */
+  if (debugging_mode && result != EXECUTION_SUCCESS)
+    return (EXECUTION_SUCCESS);
+#endif
+
+  cmdflags = simple_command->flags;
+
+  first_word_quoted =
+    simple_command->words ? (simple_command->words->word->flags & W_QUOTED) : 0;
+
+  last_command_subst_pid = NO_PID;
+  old_last_async_pid = last_asynchronous_pid;
+
+  already_forked = 0;
+
+  /* If we're in a pipeline or run in the background, set DOFORK so we
+     make the child early, before word expansion.  This keeps assignment
+     statements from affecting the parent shell's environment when they
+     should not. */
+  dofork = pipe_in != NO_PIPE || pipe_out != NO_PIPE || async;
+
+  /* Something like `%2 &' should restart job 2 in the background, not cause
+     the shell to fork here. */
+  if (dofork && pipe_in == NO_PIPE && pipe_out == NO_PIPE &&
+	simple_command->words && simple_command->words->word &&
+	simple_command->words->word->word &&
+	(simple_command->words->word->word[0] == '%'))
+    dofork = 0;
+
+  if (dofork)
+    {
+      char *p;
+
+      /* Do this now, because execute_disk_command will do it anyway in the
+	 vast majority of cases. */
+      maybe_make_export_env ();
+
+      /* Don't let a DEBUG trap overwrite the command string to be saved with
+	 the process/job associated with this child. */
+      fork_flags = async ? FORK_ASYNC : 0;
+      if (make_child (p = savestring (the_printed_command_except_trap), fork_flags) == 0)
+	{
+	  already_forked = 1;
+	  cmdflags |= CMD_NO_FORK;
+
+	  subshell_environment = SUBSHELL_FORK;		/* XXX */
+	  if (pipe_in != NO_PIPE || pipe_out != NO_PIPE)
+	    subshell_environment |= SUBSHELL_PIPE;
+	  if (async)
+	    subshell_environment |= SUBSHELL_ASYNC;
+
+	  /* We need to do this before piping to handle some really
+	     pathological cases where one of the pipe file descriptors
+	     is < 2. */
+	  if (fds_to_close)
+	    close_fd_bitmap (fds_to_close);
+
+	  /* If we fork because of an input pipe, note input pipe for later to
+	     inhibit async commands from redirecting stdin from /dev/null */
+	  stdin_redir |= pipe_in != NO_PIPE;
+
+	  do_piping (pipe_in, pipe_out);
+	  pipe_in = pipe_out = NO_PIPE;
+#if defined (COPROCESS_SUPPORT)
+	  coproc_closeall ();
+#endif
+
+	  last_asynchronous_pid = old_last_async_pid;
+
+	  if (async)
+	    subshell_level++;		/* not for pipes yet */
+
+#if defined (JOB_CONTROL)
+	  FREE (p);			/* child doesn't use pointer */
+#endif
+	}
+      else
+	{
+	  /* Don't let simple commands that aren't the last command in a
+	     pipeline change $? for the rest of the pipeline (or at all). */
+	  if (pipe_out != NO_PIPE)
+	    result = last_command_exit_value;
+	  close_pipes (pipe_in, pipe_out);
+	  command_line = (char *)NULL;      /* don't free this. */
+	  return (result);
+	}
+    }
+
+  QUIT;		/* XXX */
+
+  /* If we are re-running this as the result of executing the `command'
+     builtin, do not expand the command words a second time. */
+  if ((cmdflags & CMD_INHIBIT_EXPANSION) == 0)
+    {
+      current_fds_to_close = fds_to_close;
+      fix_assignment_words (simple_command->words);
+      /* Pass the ignore return flag down to command substitutions */
+      if (cmdflags & CMD_IGNORE_RETURN)	/* XXX */
+	comsub_ignore_return++;
+      words = expand_words (simple_command->words);
+      if (cmdflags & CMD_IGNORE_RETURN)
+	comsub_ignore_return--;
+      current_fds_to_close = (struct fd_bitmap *)NULL;
+    }
+  else
+    words = copy_word_list (simple_command->words);
+
+  /* It is possible for WORDS not to have anything left in it.
+     Perhaps all the words consisted of `$foo', and there was
+     no variable `$foo'. */
+  if (words == 0)
+    {
+      this_command_name = 0;
+      result = execute_null_command (simple_command->redirects,
+				     pipe_in, pipe_out,
+				     already_forked ? 0 : async);
+      if (already_forked)
+	sh_exit (result);
+      else
+	{
+	  bind_lastarg ((char *)NULL);
+	  set_pipestatus_from_exit (result);
+	  return (result);
+	}
+    }
+
+  lastarg = (char *)NULL;
+
+  begin_unwind_frame ("simple-command");
+
+  if (echo_command_at_execute && (cmdflags & CMD_COMMAND_BUILTIN) == 0)
+    xtrace_print_word_list (words, 1);
+
+  builtin = (sh_builtin_func_t *)NULL;
+  func = (SHELL_VAR *)NULL;
+
+  /* This test is still here in case we want to change the command builtin
+     handler code below to recursively call execute_simple_command (after
+     modifying the simple_command struct). */
+  if ((cmdflags & CMD_NO_FUNCTIONS) == 0)
+    {
+      /* Posix.2 says special builtins are found before functions.  We
+	 don't set builtin_is_special anywhere other than here, because
+	 this path is followed only when the `command' builtin is *not*
+	 being used, and we don't want to exit the shell if a special
+	 builtin executed with `command builtin' fails.  `command' is not
+	 a special builtin. */
+      if (posixly_correct)
+	{
+	  builtin = find_special_builtin (words->word->word);
+	  if (builtin)
+	    builtin_is_special = 1;
+	}
+      if (builtin == 0)
+	func = find_function (words->word->word);
+    }
+
+  /* In POSIX mode, assignment errors in the temporary environment cause a
+     non-interactive shell to exit. */
+#if 1
+  if (posixly_correct && builtin_is_special && interactive_shell == 0 && tempenv_assign_error)
+#else
+  /* This is for strict posix conformance. */
+  if (posixly_correct && interactive_shell == 0 && tempenv_assign_error)
+#endif
+    {
+      last_command_exit_value = EXECUTION_FAILURE;
+      jump_to_top_level (ERREXIT);
+    }
+  tempenv_assign_error = 0;	/* don't care about this any more */
+
+  /* This is where we handle the command builtin as a pseudo-reserved word
+     prefix. This allows us to optimize away forks if we can. */
+  old_command_builtin = -1;
+  if (builtin == 0 && func == 0)
+    {
+      WORD_LIST *disposer, *l;
+      int cmdtype;
+
+      builtin = find_shell_builtin (words->word->word);
+      while (builtin == command_builtin)
+	{
+	  disposer = words;
+	  cmdtype = 0;
+	  words = check_command_builtin (words, &cmdtype);
+	  if (cmdtype > 0)	/* command -p [--] words */
+	    {
+	      for (l = disposer; l->next != words; l = l->next)
+		;
+	      l->next = 0;
+	      dispose_words (disposer);
+	      cmdflags |= CMD_COMMAND_BUILTIN | CMD_NO_FUNCTIONS;
+	      if (cmdtype == 2)
+		cmdflags |= CMD_STDPATH;
+	      builtin = find_shell_builtin (words->word->word);
+	    }
+	  else
+	    break;
+	}
+      if (cmdflags & CMD_COMMAND_BUILTIN)
+	{
+	  old_command_builtin = executing_command_builtin;
+	  unwind_protect_int (executing_command_builtin);
+	  executing_command_builtin |= 1;
+	}        
+      builtin = 0;
+    }
+
+  add_unwind_protect (dispose_words, words);
+  QUIT;
+
+  /* Bind the last word in this command to "$_" after execution. */
+  for (lastword = words; lastword->next; lastword = lastword->next)
+    ;
+  lastarg = lastword->word->word;
+
+#if defined (JOB_CONTROL)
+  /* Is this command a job control related thing? */
+  if (words->word->word[0] == '%' && already_forked == 0)
+    {
+      this_command_name = async ? "bg" : "fg";
+      last_shell_builtin = this_shell_builtin;
+      this_shell_builtin = builtin_address (this_command_name);
+      result = (*this_shell_builtin) (words);
+      goto return_result;
+    }
+
+  /* One other possibililty.  The user may want to resume an existing job.
+     If they do, find out whether this word is a candidate for a running
+     job. */
+  if (job_control && already_forked == 0 && async == 0 &&
+	!first_word_quoted &&
+	!words->next &&
+	words->word->word[0] &&
+	!simple_command->redirects &&
+	pipe_in == NO_PIPE &&
+	pipe_out == NO_PIPE &&
+	(temp = get_string_value ("auto_resume")))
+    {
+      int job, jflags, started_status;
+
+      jflags = JM_STOPPED|JM_FIRSTMATCH;
+      if (STREQ (temp, "exact"))
+	jflags |= JM_EXACT;
+      else if (STREQ (temp, "substring"))
+	jflags |= JM_SUBSTRING;
+      else
+	jflags |= JM_PREFIX;
+      job = get_job_by_name (words->word->word, jflags);
+      if (job != NO_JOB)
+	{
+	  run_unwind_frame ("simple-command");
+	  this_command_name = "fg";
+	  last_shell_builtin = this_shell_builtin;
+	  this_shell_builtin = builtin_address ("fg");
+
+	  started_status = start_job (job, 1);
+	  return ((started_status < 0) ? EXECUTION_FAILURE : started_status);
+	}
+    }
+#endif /* JOB_CONTROL */
+
+run_builtin:
+  /* Remember the name of this command globally. */
+  this_command_name = words->word->word;
+
+  QUIT;
+
+  /* This command could be a shell builtin or a user-defined function.
+     We have already found special builtins by this time, so we do not
+     set builtin_is_special.  If this is a function or builtin, and we
+     have pipes, then fork a subshell in here.  Otherwise, just execute
+     the command directly. */
+  if (func == 0 && builtin == 0)
+    builtin = find_shell_builtin (this_command_name);
+
+  last_shell_builtin = this_shell_builtin;
+  this_shell_builtin = builtin;
+
+  if (builtin || func)
+    {
+      if (builtin)
+        {
+	  old_builtin = executing_builtin;
+	  unwind_protect_int (executing_builtin);	/* modified in execute_builtin */
+	  if (old_command_builtin == -1)	/* sentinel, can be set above */
+	    {
+	      old_command_builtin = executing_command_builtin;
+	      unwind_protect_int (executing_command_builtin);	/* ditto and set above */
+	    }
+        }
+      if (already_forked)
+	{
+	  /* reset_terminating_signals (); */	/* XXX */
+	  /* Reset the signal handlers in the child, but don't free the
+	     trap strings.  Set a flag noting that we have to free the
+	     trap strings if we run trap to change a signal disposition. */
+	  reset_signal_handlers ();
+	  subshell_environment |= SUBSHELL_RESETTRAP;
+
+	  if (async)
+	    {
+	      if ((cmdflags & CMD_STDIN_REDIR) &&
+		    pipe_in == NO_PIPE &&
+		    (stdin_redirects (simple_command->redirects) == 0))
+		async_redirect_stdin ();
+	      setup_async_signals ();
+	    }
+
+	  if (async == 0)
+	    subshell_level++;
+	  execute_subshell_builtin_or_function
+	    (words, simple_command->redirects, builtin, func,
+	     pipe_in, pipe_out, async, fds_to_close,
+	     cmdflags);
+	  subshell_level--;
+	}
+      else
+	{
+	  result = execute_builtin_or_function
+	    (words, builtin, func, simple_command->redirects, fds_to_close,
+	     cmdflags);
+	  if (builtin)
+	    {
+	      if (result > EX_SHERRBASE)
+		{
+		  switch (result)
+		    {
+		    case EX_REDIRFAIL:
+		    case EX_BADASSIGN:
+		    case EX_EXPFAIL:
+		      /* These errors cause non-interactive posix mode shells to exit */
+		      if (posixly_correct && builtin_is_special && interactive_shell == 0)
+			{
+			  last_command_exit_value = EXECUTION_FAILURE;
+			  jump_to_top_level (ERREXIT);
+			}
+		      break;
+		    case EX_DISKFALLBACK:
+		      /* XXX - experimental */
+		      executing_builtin = old_builtin;
+		      executing_command_builtin = old_command_builtin;
+		      builtin = 0;
+		      /* XXX - redirections will have to be performed again */
+		      goto execute_from_filesystem;
+		    }
+		  result = builtin_status (result);
+		  if (builtin_is_special)
+		    special_builtin_failed = 1;	/* XXX - take command builtin into account? */
+		}
+	      /* In POSIX mode, if there are assignment statements preceding
+		 a special builtin, they persist after the builtin
+		 completes. */
+	      if (posixly_correct && builtin_is_special && temporary_env)
+		merge_temporary_env ();
+	    }
+	  else		/* function */
+	    {
+	      if (result == EX_USAGE)
+		result = EX_BADUSAGE;
+	      else if (result > EX_SHERRBASE)
+		result = builtin_status (result);
+	    }
+
+	  set_pipestatus_from_exit (result);
+
+	  goto return_result;
+	}
+    }
+
+  if (autocd && interactive && words->word && is_dirname (words->word->word))
+    {
+      words = make_word_list (make_word ("--"), words);
+      words = make_word_list (make_word ("cd"), words);
+      xtrace_print_word_list (words, 0);
+      func = find_function ("cd");
+      goto run_builtin;
+    }
+
+execute_from_filesystem:
+  if (command_line == 0)
+    command_line = savestring (the_printed_command_except_trap ? the_printed_command_except_trap : "");
+
+#if defined (PROCESS_SUBSTITUTION)
+  /* The old code did not test already_forked and only did this if
+     subshell_environment&SUBSHELL_COMSUB != 0 (comsubs and procsubs). Other
+     uses of the no-fork optimization left FIFOs in $TMPDIR */
+  if (already_forked == 0 && (cmdflags & CMD_NO_FORK) && fifos_pending() > 0)
+    cmdflags &= ~CMD_NO_FORK;
+#endif
+  result = execute_disk_command (words, simple_command->redirects, command_line,
+			pipe_in, pipe_out, async, fds_to_close,
+			cmdflags);
+
+ return_result:
+  bind_lastarg (lastarg);
+  FREE (command_line);
+  dispose_words (words);
+  if (builtin)
+    {
+      executing_builtin = old_builtin;
+      executing_command_builtin = old_command_builtin;
+    }
+  discard_unwind_frame ("simple-command");
+  this_command_name = (char *)NULL;	/* points to freed memory now */
+  return (result);
+}
+
+/* Translate the special builtin exit statuses.  We don't really need a
+   function for this; it's a placeholder for future work. */
+static int
+builtin_status (result)
+     int result;
+{
+  int r;
+
+  switch (result)
+    {
+    case EX_USAGE:
+    case EX_BADSYNTAX:
+      r = EX_BADUSAGE;
+      break;
+    case EX_REDIRFAIL:
+    case EX_BADASSIGN:
+    case EX_EXPFAIL:
+      r = EXECUTION_FAILURE;
+      break;
+    default:
+      /* other special exit statuses not yet defined */
+      r = (result > EX_SHERRBASE) ? EXECUTION_FAILURE : EXECUTION_SUCCESS;
+      break;
+    }
+  return (r);
+}
+
+static int
+execute_builtin (builtin, words, flags, subshell)
+     sh_builtin_func_t *builtin;
+     WORD_LIST *words;
+     int flags, subshell;
+{
+  int result, eval_unwind, ignexit_flag;
+  int isbltinenv, should_keep;
+  char *error_trap;
+
+  error_trap = 0;
+  should_keep = 0;
+
+  /* The eval builtin calls parse_and_execute, which does not know about
+     the setting of flags, and always calls the execution functions with
+     flags that will exit the shell on an error if -e is set.  If the
+     eval builtin is being called, and we're supposed to ignore the exit
+     value of the command, we turn the -e flag off ourselves and disable
+     the ERR trap, then restore them when the command completes.  This is
+     also a problem (as below) for the command and source/. builtins. */
+  if (subshell == 0 && (flags & CMD_IGNORE_RETURN) &&
+	(builtin == eval_builtin || (flags & CMD_COMMAND_BUILTIN) || builtin == source_builtin))
+    {
+      begin_unwind_frame ("eval_builtin");
+      unwind_protect_int (exit_immediately_on_error);
+      unwind_protect_int (builtin_ignoring_errexit);
+      error_trap = TRAP_STRING (ERROR_TRAP);
+      if (error_trap)
+	{
+	  error_trap = savestring (error_trap);
+	  add_unwind_protect (xfree, error_trap);
+	  add_unwind_protect (set_error_trap, error_trap);
+	  restore_default_signal (ERROR_TRAP);
+	}
+      exit_immediately_on_error = 0;
+      ignexit_flag = builtin_ignoring_errexit;
+      builtin_ignoring_errexit = 1;
+      eval_unwind = 1;
+    }
+  else
+    eval_unwind = 0;
+
+  /* The temporary environment for a builtin is supposed to apply to
+     all commands executed by that builtin.  Currently, this is a
+     problem only with the `unset', `source' and `eval' builtins.
+     `mapfile' is a special case because it uses evalstring (same as
+     eval or source) to run its callbacks. */
+  /* SHOULD_KEEP is for the pop_scope call below; it only matters when
+     posixly_correct is set, but we should propagate the temporary environment
+     to the enclosing environment only for special builtins. */
+  isbltinenv = (builtin == source_builtin || builtin == eval_builtin || builtin == unset_builtin || builtin == mapfile_builtin);
+  should_keep = isbltinenv && builtin != mapfile_builtin;
+#if defined (HISTORY) && defined (READLINE)
+  if (builtin == fc_builtin || builtin == read_builtin)
+    {
+      isbltinenv = 1;
+      should_keep = 0;
+    }
+#endif
+
+  if (isbltinenv)
+    {
+      if (subshell == 0)
+	begin_unwind_frame ("builtin_env");
+
+      if (temporary_env)
+	{
+	  push_scope (VC_BLTNENV, temporary_env);
+	  if (flags & CMD_COMMAND_BUILTIN)
+	    should_keep = 0;
+	  if (subshell == 0)
+	    add_unwind_protect (pop_scope, should_keep ? "1" : 0);
+          temporary_env = (HASH_TABLE *)NULL;	  
+	}
+    }
+
+  if (subshell == 0 && builtin == eval_builtin)
+    {
+      if (evalnest_max > 0 && evalnest >= evalnest_max)
+	{
+	  internal_error (_("eval: maximum eval nesting level exceeded (%d)"), evalnest);
+	  evalnest = 0;
+	  jump_to_top_level (DISCARD);
+	}
+      unwind_protect_int (evalnest);
+      /* The test for subshell == 0 above doesn't make a difference */
+      evalnest++;	/* execute_subshell_builtin_or_function sets this to 0 */
+    }
+  else if (subshell == 0 && builtin == source_builtin)
+    {
+      if (sourcenest_max > 0 && sourcenest >= sourcenest_max)
+	{
+	  internal_error (_("%s: maximum source nesting level exceeded (%d)"), this_command_name, sourcenest);
+	  sourcenest = 0;
+	  jump_to_top_level (DISCARD);
+	}
+      unwind_protect_int (sourcenest);
+      /* The test for subshell == 0 above doesn't make a difference */
+      sourcenest++;	/* execute_subshell_builtin_or_function sets this to 0 */
+    }
+
+  /* `return' does a longjmp() back to a saved environment in execute_function.
+     If a variable assignment list preceded the command, and the shell is
+     running in POSIX mode, we need to merge that into the shell_variables
+     table, since `return' is a POSIX special builtin. We don't do this if
+     it's being run by the `command' builtin, since that's supposed to inhibit
+     the special builtin properties. */
+  if (posixly_correct && subshell == 0 && builtin == return_builtin && (flags & CMD_COMMAND_BUILTIN) == 0 && temporary_env)
+    {
+      begin_unwind_frame ("return_temp_env");
+      add_unwind_protect (merge_temporary_env, (char *)NULL);
+    }
+
+  executing_builtin++;
+  executing_command_builtin |= builtin == command_builtin;
+  result = ((*builtin) (words->next));
+
+  /* This shouldn't happen, but in case `return' comes back instead of
+     longjmp'ing, we need to unwind. */
+  if (posixly_correct && subshell == 0 && builtin == return_builtin && temporary_env)
+    discard_unwind_frame ("return_temp_env");
+
+  if (subshell == 0 && isbltinenv)
+    run_unwind_frame ("builtin_env");
+
+  if (eval_unwind)
+    {
+      builtin_ignoring_errexit = ignexit_flag;
+      exit_immediately_on_error = builtin_ignoring_errexit ? 0 : errexit_flag;
+      if (error_trap)
+	{
+	  set_error_trap (error_trap);
+	  free (error_trap);
+	}
+      discard_unwind_frame ("eval_builtin");
+    }
+
+  return (result);
+}
+
+static void
+maybe_restore_getopt_state (gs)
+     sh_getopt_state_t *gs;
+{
+  /* If we have a local copy of OPTIND and it's at the right (current)
+     context, then we restore getopt's internal state.  If not, we just
+     let it go.  We know there is a local OPTIND if gs->gs_flags & 1.
+     This is set below in execute_function() before the context is run. */
+  if (gs->gs_flags & 1)
+    sh_getopt_restore_istate (gs);
+  else
+    free (gs);
+}
+
+#if defined (ARRAY_VARS)
+void
+restore_funcarray_state (fa)
+     struct func_array_state *fa;
+{
+  SHELL_VAR *nfv;
+  ARRAY *funcname_a;
+
+  array_pop (fa->source_a);
+  array_pop (fa->lineno_a);
+
+  GET_ARRAY_FROM_VAR ("FUNCNAME", nfv, funcname_a);
+  if (nfv == fa->funcname_v)
+    array_pop (funcname_a);
+
+  free (fa);
+}
+#endif
+
+static int
+execute_function (var, words, flags, fds_to_close, async, subshell)
+     SHELL_VAR *var;
+     WORD_LIST *words;
+     int flags;
+     struct fd_bitmap *fds_to_close;
+     int async, subshell;
+{
+  int return_val, result;
+  COMMAND *tc, *fc, *save_current;
+  char *debug_trap, *error_trap, *return_trap;
+#if defined (ARRAY_VARS)
+  SHELL_VAR *funcname_v, *bash_source_v, *bash_lineno_v;
+  ARRAY *funcname_a;
+  volatile ARRAY *bash_source_a;
+  volatile ARRAY *bash_lineno_a;
+  struct func_array_state *fa;
+#endif
+  FUNCTION_DEF *shell_fn;
+  char *sfile, *t;
+  sh_getopt_state_t *gs;
+  SHELL_VAR *gv;
+
+  USE_VAR(fc);
+
+  if (funcnest_max > 0 && funcnest >= funcnest_max)
+    {
+      internal_error (_("%s: maximum function nesting level exceeded (%d)"), var->name, funcnest);
+      funcnest = 0;	/* XXX - should we reset it somewhere else? */
+      jump_to_top_level (DISCARD);
+    }
+
+#if defined (ARRAY_VARS)
+  GET_ARRAY_FROM_VAR ("FUNCNAME", funcname_v, funcname_a);
+  GET_ARRAY_FROM_VAR ("BASH_SOURCE", bash_source_v, bash_source_a);
+  GET_ARRAY_FROM_VAR ("BASH_LINENO", bash_lineno_v, bash_lineno_a);
+#endif
+
+  tc = (COMMAND *)copy_command (function_cell (var));
+  if (tc && (flags & CMD_IGNORE_RETURN))
+    tc->flags |= CMD_IGNORE_RETURN;
+
+  /* A limited attempt at optimization: shell functions at the end of command
+     substitutions that are already marked NO_FORK. */
+  if (tc && (flags & CMD_NO_FORK) && (subshell_environment & SUBSHELL_COMSUB))
+    optimize_shell_function (tc);
+
+  gs = sh_getopt_save_istate ();
+  if (subshell == 0)
+    {
+      begin_unwind_frame ("function_calling");
+      /* If the shell is in posix mode, this will push the variables in
+	 the temporary environment to the "current shell environment" (the
+	 global scope), and dispose the temporary env before setting it to
+	 NULL later. This behavior has disappeared from the latest edition
+	 of the standard, so I will eventually remove it from variables.c:
+	 push_var_context. */
+      push_context (var->name, subshell, temporary_env);
+      /* This has to be before the pop_context(), because the unwinding of
+	 local variables may cause the restore of a local declaration of
+	 OPTIND to force a getopts state reset. */
+      add_unwind_protect (maybe_restore_getopt_state, gs);
+      add_unwind_protect (pop_context, (char *)NULL);
+      unwind_protect_int (line_number);
+      unwind_protect_int (line_number_for_err_trap);
+      unwind_protect_int (function_line_number);
+      unwind_protect_int (return_catch_flag);
+      unwind_protect_jmp_buf (return_catch);
+      add_unwind_protect (dispose_command, (char *)tc);
+      unwind_protect_pointer (this_shell_function);
+      unwind_protect_int (funcnest);
+      unwind_protect_int (loop_level);
+    }
+  else
+    push_context (var->name, subshell, temporary_env);	/* don't unwind-protect for subshells */
+
+  temporary_env = (HASH_TABLE *)NULL;
+
+  this_shell_function = var;
+  make_funcname_visible (1);
+
+  debug_trap = TRAP_STRING(DEBUG_TRAP);
+  error_trap = TRAP_STRING(ERROR_TRAP);
+  return_trap = TRAP_STRING(RETURN_TRAP);
+  
+  /* The order of the unwind protects for debug_trap, error_trap and
+     return_trap is important here!  unwind-protect commands are run
+     in reverse order of registration.  If this causes problems, take
+     out the xfree unwind-protect calls and live with the small memory leak. */
+
+  /* function_trace_mode != 0 means that all functions inherit the DEBUG trap.
+     if the function has the trace attribute set, it inherits the DEBUG trap */
+  if (debug_trap && ((trace_p (var) == 0) && function_trace_mode == 0))
+    {
+      if (subshell == 0)
+	{
+	  debug_trap = savestring (debug_trap);
+	  add_unwind_protect (xfree, debug_trap);
+	  add_unwind_protect (maybe_set_debug_trap, debug_trap);
+	}
+      restore_default_signal (DEBUG_TRAP);
+    }
+
+  /* error_trace_mode != 0 means that functions inherit the ERR trap. */
+  if (error_trap && error_trace_mode == 0)
+    {
+      if (subshell == 0)
+	{
+	  error_trap = savestring (error_trap);
+	  add_unwind_protect (xfree, error_trap);
+	  add_unwind_protect (maybe_set_error_trap, error_trap);
+	}
+      restore_default_signal (ERROR_TRAP);
+    }
+
+  /* Shell functions inherit the RETURN trap if function tracing is on
+     globally or on individually for this function. */
+  if (return_trap && (signal_in_progress (DEBUG_TRAP) || ((trace_p (var) == 0) && function_trace_mode == 0)))
+    {
+      if (subshell == 0)
+	{
+	  return_trap = savestring (return_trap);
+	  add_unwind_protect (xfree, return_trap);
+	  add_unwind_protect (maybe_set_return_trap, return_trap);
+	}
+      restore_default_signal (RETURN_TRAP);
+    }
+  
+  funcnest++;
+#if defined (ARRAY_VARS)
+  /* This is quite similar to the code in shell.c and elsewhere. */
+  shell_fn = find_function_def (this_shell_function->name);
+  sfile = shell_fn ? shell_fn->source_file : "";
+  array_push ((ARRAY *)funcname_a, this_shell_function->name);
+
+  array_push ((ARRAY *)bash_source_a, sfile);
+  t = itos (executing_line_number ());
+  array_push ((ARRAY *)bash_lineno_a, t);
+  free (t);
+#endif
+
+#if defined (ARRAY_VARS)
+  fa = (struct func_array_state *)xmalloc (sizeof (struct func_array_state));
+  fa->source_a = (ARRAY *)bash_source_a;
+  fa->source_v = bash_source_v;
+  fa->lineno_a = (ARRAY *)bash_lineno_a;
+  fa->lineno_v = bash_lineno_v;
+  fa->funcname_a = (ARRAY *)funcname_a;
+  fa->funcname_v = funcname_v;
+  if (subshell == 0)
+    add_unwind_protect (restore_funcarray_state, fa);
+#endif
+
+  /* The temporary environment for a function is supposed to apply to
+     all commands executed within the function body. */
+
+  /* Initialize BASH_ARGC and BASH_ARGV before we blow away the positional
+     parameters */
+  if (debugging_mode || shell_compatibility_level <= 44)
+    init_bash_argv ();
+
+  remember_args (words->next, 1);
+
+  /* Update BASH_ARGV and BASH_ARGC */
+  if (debugging_mode)
+    {
+      push_args (words->next);
+      if (subshell == 0)
+	add_unwind_protect (pop_args, 0);
+    }
+
+  /* Number of the line on which the function body starts. */
+  line_number = function_line_number = tc->line;
+
+#if defined (JOB_CONTROL)
+  if (subshell)
+    stop_pipeline (async, (COMMAND *)NULL);
+#endif
+
+  if (shell_compatibility_level > 43)
+    loop_level = 0;
+
+  fc = tc;
+
+  from_return_trap = 0;
+
+  return_catch_flag++;
+  return_val = setjmp_nosigs (return_catch);
+
+  if (return_val)
+    {
+      result = return_catch_value;
+      /* Run the RETURN trap in the function's context. */
+      save_current = currently_executing_command;
+      if (from_return_trap == 0)
+	run_return_trap ();
+      currently_executing_command = save_current;
+    }
+  else
+    {
+      /* Run the debug trap here so we can trap at the start of a function's
+	 execution rather than the execution of the body's first command. */
+      showing_function_line = 1;
+      save_current = currently_executing_command;
+      result = run_debug_trap ();
+#if defined (DEBUGGER)
+      /* In debugging mode, if the DEBUG trap returns a non-zero status, we
+	 skip the command. */
+      if (debugging_mode == 0 || result == EXECUTION_SUCCESS)
+	{
+	  showing_function_line = 0;
+	  currently_executing_command = save_current;
+	  result = execute_command_internal (fc, 0, NO_PIPE, NO_PIPE, fds_to_close);
+
+	  /* Run the RETURN trap in the function's context */
+	  save_current = currently_executing_command;
+	  run_return_trap ();
+	  currently_executing_command = save_current;
+	}
+#else
+      result = execute_command_internal (fc, 0, NO_PIPE, NO_PIPE, fds_to_close);
+
+      save_current = currently_executing_command;
+      run_return_trap ();
+      currently_executing_command = save_current;
+#endif
+      showing_function_line = 0;
+    }
+
+  /* If we have a local copy of OPTIND, note it in the saved getopts state. */
+  gv = find_variable ("OPTIND");
+  if (gv && gv->context == variable_context)
+    gs->gs_flags |= 1;
+
+  if (subshell == 0)
+    run_unwind_frame ("function_calling");
+#if defined (ARRAY_VARS)
+  else
+    {
+      restore_funcarray_state (fa);
+      /* Restore BASH_ARGC and BASH_ARGV */
+      if (debugging_mode)
+	pop_args ();
+    }
+#endif
+
+  if (variable_context == 0 || this_shell_function == 0)
+    {
+      make_funcname_visible (0);
+#if defined (PROCESS_SUBSTITUTION)
+      unlink_fifo_list ();
+#endif
+    }
+
+  return (result);
+}
+
+/* A convenience routine for use by other parts of the shell to execute
+   a particular shell function. */
+int
+execute_shell_function (var, words)
+     SHELL_VAR *var;
+     WORD_LIST *words;
+{
+  int ret;
+  struct fd_bitmap *bitmap;
+
+  bitmap = new_fd_bitmap (FD_BITMAP_DEFAULT_SIZE);
+  begin_unwind_frame ("execute-shell-function");
+  add_unwind_protect (dispose_fd_bitmap, (char *)bitmap);
+      
+  ret = execute_function (var, words, 0, bitmap, 0, 0);
+
+  dispose_fd_bitmap (bitmap);
+  discard_unwind_frame ("execute-shell-function");
+
+  return ret;
+}
+
+/* Execute a shell builtin or function in a subshell environment.  This
+   routine does not return; it only calls exit().  If BUILTIN is non-null,
+   it points to a function to call to execute a shell builtin; otherwise
+   VAR points at the body of a function to execute.  WORDS is the arguments
+   to the command, REDIRECTS specifies redirections to perform before the
+   command is executed. */
+static void
+execute_subshell_builtin_or_function (words, redirects, builtin, var,
+				      pipe_in, pipe_out, async, fds_to_close,
+				      flags)
+     WORD_LIST *words;
+     REDIRECT *redirects;
+     sh_builtin_func_t *builtin;
+     SHELL_VAR *var;
+     int pipe_in, pipe_out, async;
+     struct fd_bitmap *fds_to_close;
+     int flags;
+{
+  int result, r, funcvalue;
+#if defined (JOB_CONTROL)
+  int jobs_hack;
+
+  jobs_hack = (builtin == jobs_builtin) &&
+		((subshell_environment & SUBSHELL_ASYNC) == 0 || pipe_out != NO_PIPE);
+#endif
+
+  /* A subshell is neither a login shell nor interactive. */
+  login_shell = interactive = 0;
+  if (builtin == eval_builtin)
+    evalnest = 0;
+  else if (builtin == source_builtin)
+    sourcenest = 0;
+
+  if (async)
+    subshell_environment |= SUBSHELL_ASYNC;
+  if (pipe_in != NO_PIPE || pipe_out != NO_PIPE)
+    subshell_environment |= SUBSHELL_PIPE;
+
+  maybe_make_export_env ();	/* XXX - is this needed? */
+
+#if defined (JOB_CONTROL)
+  /* Eradicate all traces of job control after we fork the subshell, so
+     all jobs begun by this subshell are in the same process group as
+     the shell itself. */
+
+  /* Allow the output of `jobs' to be piped. */
+  if (jobs_hack)
+    kill_current_pipeline ();
+  else
+    without_job_control ();
+
+  set_sigchld_handler ();
+#else
+  without_job_control ();
+#endif /* JOB_CONTROL */
+
+  set_sigint_handler ();
+
+  if (fds_to_close)
+    close_fd_bitmap (fds_to_close);
+
+  do_piping (pipe_in, pipe_out);
+
+  if (do_redirections (redirects, RX_ACTIVE) != 0)
+    exit (EXECUTION_FAILURE);
+
+  if (builtin)
+    {
+      /* Give builtins a place to jump back to on failure,
+	 so we don't go back up to main(). */
+      result = setjmp_nosigs (top_level);
+
+      /* Give the return builtin a place to jump to when executed in a subshell
+         or pipeline */
+      funcvalue = 0;
+      if (return_catch_flag && builtin == return_builtin)
+        funcvalue = setjmp_nosigs (return_catch);
+
+      if (result == EXITPROG)
+	subshell_exit (last_command_exit_value);
+      else if (result)
+	subshell_exit (EXECUTION_FAILURE);
+      else if (funcvalue)
+	subshell_exit (return_catch_value);
+      else
+	{
+	  r = execute_builtin (builtin, words, flags, 1);
+	  fflush (stdout);
+	  if (r == EX_USAGE)
+	    r = EX_BADUSAGE;
+	  /* XXX - experimental */
+	  else if (r == EX_DISKFALLBACK)
+	    {
+	      char *command_line;
+
+	      command_line = savestring (the_printed_command_except_trap ? the_printed_command_except_trap : "");
+	      r = execute_disk_command (words, (REDIRECT *)0, command_line,
+		  -1, -1, async, (struct fd_bitmap *)0, flags|CMD_NO_FORK);
+	    }
+	  subshell_exit (r);
+	}
+    }
+  else
+    {
+      r = execute_function (var, words, flags, fds_to_close, async, 1);
+      fflush (stdout);
+      subshell_exit (r);
+    }
+}
+
+/* Execute a builtin or function in the current shell context.  If BUILTIN
+   is non-null, it is the builtin command to execute, otherwise VAR points
+   to the body of a function.  WORDS are the command's arguments, REDIRECTS
+   are the redirections to perform.  FDS_TO_CLOSE is the usual bitmap of
+   file descriptors to close.
+
+   If BUILTIN is exec_builtin, the redirections specified in REDIRECTS are
+   not undone before this function returns. */
+static int
+execute_builtin_or_function (words, builtin, var, redirects,
+			     fds_to_close, flags)
+     WORD_LIST *words;
+     sh_builtin_func_t *builtin;
+     SHELL_VAR *var;
+     REDIRECT *redirects;
+     struct fd_bitmap *fds_to_close;
+     int flags;
+{
+  int result;
+  REDIRECT *saved_undo_list;
+#if defined (PROCESS_SUBSTITUTION)
+  int ofifo, nfifo, osize;
+  void *ofifo_list;
+#endif
+
+#if defined (PROCESS_SUBSTITUTION)
+  begin_unwind_frame ("saved_fifos");
+  /* If we return, we longjmp and don't get a chance to restore the old
+     fifo list, so we add an unwind protect to free it */
+  ofifo = num_fifos ();
+  ofifo_list = copy_fifo_list (&osize);
+  if (ofifo_list)
+    add_unwind_protect (xfree, ofifo_list);
+#endif
+
+  if (do_redirections (redirects, RX_ACTIVE|RX_UNDOABLE) != 0)
+    {
+      undo_partial_redirects ();
+      dispose_exec_redirects ();
+#if defined (PROCESS_SUBSTITUTION)
+      free (ofifo_list);
+#endif
+      return (EX_REDIRFAIL);	/* was EXECUTION_FAILURE */
+    }
+
+  saved_undo_list = redirection_undo_list;
+
+  /* Calling the "exec" builtin changes redirections forever. */
+  if (builtin == exec_builtin)
+    {
+      dispose_redirects (saved_undo_list);
+      saved_undo_list = exec_redirection_undo_list;
+      exec_redirection_undo_list = (REDIRECT *)NULL;
+    }
+  else
+    dispose_exec_redirects ();
+
+  if (saved_undo_list)
+    {
+      begin_unwind_frame ("saved-redirects");
+      add_unwind_protect (cleanup_redirects, (char *)saved_undo_list);
+    }
+
+  redirection_undo_list = (REDIRECT *)NULL;
+
+  if (builtin)
+    result = execute_builtin (builtin, words, flags, 0);
+  else
+    result = execute_function (var, words, flags, fds_to_close, 0, 0);
+
+  /* We do this before undoing the effects of any redirections. */
+  fflush (stdout);
+  fpurge (stdout);
+  if (ferror (stdout))
+    clearerr (stdout);  
+
+  /* If we are executing the `command' builtin, but this_shell_builtin is
+     set to `exec_builtin', we know that we have something like
+     `command exec [redirection]', since otherwise `exec' would have
+     overwritten the shell and we wouldn't get here.  In this case, we
+     want to behave as if the `command' builtin had not been specified
+     and preserve the redirections. */
+  if (builtin == command_builtin && this_shell_builtin == exec_builtin)
+    {
+      int discard;
+
+      discard = 0;
+      if (saved_undo_list)
+	{
+	  dispose_redirects (saved_undo_list);
+	  discard = 1;
+	}
+      redirection_undo_list = exec_redirection_undo_list;
+      saved_undo_list = exec_redirection_undo_list = (REDIRECT *)NULL;      
+      if (discard)
+	discard_unwind_frame ("saved-redirects");
+    }
+
+  if (saved_undo_list)
+    {
+      redirection_undo_list = saved_undo_list;
+      discard_unwind_frame ("saved-redirects");
+    }
+
+  undo_partial_redirects ();
+
+#if defined (PROCESS_SUBSTITUTION)
+  /* Close any FIFOs created by this builtin or function. */
+  nfifo = num_fifos ();
+  if (nfifo > ofifo)
+    close_new_fifos (ofifo_list, osize);
+  if (ofifo_list)
+    free (ofifo_list);
+  discard_unwind_frame ("saved_fifos");
+#endif
+
+  return (result);
+}
+
+void
+setup_async_signals ()
+{
+#if defined (__BEOS__)
+  set_signal_handler (SIGHUP, SIG_IGN);	/* they want csh-like behavior */
+#endif
+
+#if defined (JOB_CONTROL)
+  if (job_control == 0)
+#endif
+    {
+      /* Make sure we get the original signal dispositions now so we don't
+	 confuse the trap builtin later if the subshell tries to use it to
+	 reset SIGINT/SIGQUIT.  Don't call set_signal_ignored; that sets
+	 the value of original_signals to SIG_IGN. Posix interpretation 751. */
+      get_original_signal (SIGINT);
+      set_signal_handler (SIGINT, SIG_IGN);
+
+      get_original_signal (SIGQUIT);
+      set_signal_handler (SIGQUIT, SIG_IGN);
+    }
+}
+
+/* Execute a simple command that is hopefully defined in a disk file
+   somewhere.
+
+   1) fork ()
+   2) connect pipes
+   3) look up the command
+   4) do redirections
+   5) execve ()
+   6) If the execve failed, see if the file has executable mode set.
+   If so, and it isn't a directory, then execute its contents as
+   a shell script.
+
+   Note that the filename hashing stuff has to take place up here,
+   in the parent.  This is probably why the Bourne style shells
+   don't handle it, since that would require them to go through
+   this gnarly hair, for no good reason.
+
+   NOTE: callers expect this to fork or exit(). */
+
+/* Name of a shell function to call when a command name is not found. */
+#ifndef NOTFOUND_HOOK
+#  define NOTFOUND_HOOK "command_not_found_handle"
+#endif
+
+static int
+execute_disk_command (words, redirects, command_line, pipe_in, pipe_out,
+		      async, fds_to_close, cmdflags)
+     WORD_LIST *words;
+     REDIRECT *redirects;
+     char *command_line;
+     int pipe_in, pipe_out, async;
+     struct fd_bitmap *fds_to_close;
+     int cmdflags;
+{
+  char *pathname, *command, **args, *p;
+  int nofork, stdpath, result, fork_flags;
+  pid_t pid;
+  SHELL_VAR *hookf;
+  WORD_LIST *wl;
+
+  stdpath = (cmdflags & CMD_STDPATH);	/* use command -p path */
+  nofork = (cmdflags & CMD_NO_FORK);	/* Don't fork, just exec, if no pipes */
+  pathname = words->word->word;
+
+  p = 0;
+  result = EXECUTION_SUCCESS;
+#if defined (RESTRICTED_SHELL)
+  command = (char *)NULL;
+  if (restricted && mbschr (pathname, '/'))
+    {
+      internal_error (_("%s: restricted: cannot specify `/' in command names"),
+		    pathname);
+      result = last_command_exit_value = EXECUTION_FAILURE;
+
+      /* If we're not going to fork below, we must already be in a child
+         process or a context in which it's safe to call exit(2).  */
+      if (nofork && pipe_in == NO_PIPE && pipe_out == NO_PIPE)
+	exit (last_command_exit_value);
+      else
+	goto parent_return;
+    }
+#endif /* RESTRICTED_SHELL */
+
+  command = search_for_command (pathname, CMDSRCH_HASH|(stdpath ? CMDSRCH_STDPATH : 0));
+  QUIT;
+
+  if (command)
+    {
+      /* If we're optimizing out the fork (implicit `exec'), decrement the
+	 shell level like `exec' would do. */
+#if 0 /* TAG: bash-5.2 psmith 10/11/2020 */
+      if (nofork && pipe_in == NO_PIPE && pipe_out == NO_PIPE && (subshell_environment & SUBSHELL_PIPE) == 0)
+#else
+      if (nofork && pipe_in == NO_PIPE && pipe_out == NO_PIPE)
+#endif
+	adjust_shell_level (-1);
+
+      maybe_make_export_env ();
+      put_command_name_into_env (command);
+    }
+
+  /* We have to make the child before we check for the non-existence
+     of COMMAND, since we want the error messages to be redirected. */
+  /* If we can get away without forking and there are no pipes to deal with,
+     don't bother to fork, just directly exec the command. */
+  if (nofork && pipe_in == NO_PIPE && pipe_out == NO_PIPE)
+    pid = 0;
+  else
+    {
+      fork_flags = async ? FORK_ASYNC : 0;
+      pid = make_child (p = savestring (command_line), fork_flags);
+    }
+
+  if (pid == 0)
+    {
+      int old_interactive;
+
+      reset_terminating_signals ();	/* XXX */
+      /* Cancel traps, in trap.c. */
+      restore_original_signals ();
+
+#if defined (JOB_CONTROL)
+      FREE (p);
+#endif
+
+      /* restore_original_signals may have undone the work done
+	 by make_child to ensure that SIGINT and SIGQUIT are ignored
+	 in asynchronous children. */
+      if (async)
+	{
+	  if ((cmdflags & CMD_STDIN_REDIR) &&
+		pipe_in == NO_PIPE &&
+		(stdin_redirects (redirects) == 0))
+	    async_redirect_stdin ();
+	  setup_async_signals ();
+	}
+
+      /* This functionality is now provided by close-on-exec of the
+	 file descriptors manipulated by redirection and piping.
+	 Some file descriptors still need to be closed in all children
+	 because of the way bash does pipes; fds_to_close is a
+	 bitmap of all such file descriptors. */
+      if (fds_to_close)
+	close_fd_bitmap (fds_to_close);
+
+      do_piping (pipe_in, pipe_out);
+
+      old_interactive = interactive;
+      if (async)
+	interactive = 0;
+
+      subshell_environment |= SUBSHELL_FORK;	/* XXX - was just = */
+
+#if defined (PROCESS_SUBSTITUTION) && !defined (HAVE_DEV_FD)
+      clear_fifo_list ();	/* XXX - we haven't created any FIFOs */
+#endif
+
+      if (redirects && (do_redirections (redirects, RX_ACTIVE) != 0))
+	{
+#if defined (PROCESS_SUBSTITUTION)
+	  /* Try to remove named pipes that may have been created as the
+	     result of redirections. */
+	  unlink_fifo_list ();
+#endif /* PROCESS_SUBSTITUTION */
+	  exit (EXECUTION_FAILURE);
+	}
+
+      if (async)
+	interactive = old_interactive;
+
+      if (command == 0)
+	{
+	  hookf = find_function (NOTFOUND_HOOK);
+	  if (hookf == 0)
+	    {
+	      /* Make sure filenames are displayed using printable characters */
+	      pathname = printable_filename (pathname, 0);
+	      internal_error (_("%s: command not found"), pathname);
+	      exit (EX_NOTFOUND);	/* Posix.2 says the exit status is 127 */
+	    }
+
+	  /* We don't want to manage process groups for processes we start
+	     from here, so we turn off job control and don't attempt to
+	     manipulate the terminal's process group. */
+	  without_job_control ();
+
+#if defined (JOB_CONTROL)
+	  set_sigchld_handler ();
+#endif
+
+	  wl = make_word_list (make_word (NOTFOUND_HOOK), words);
+	  exit (execute_shell_function (hookf, wl));
+	}
+
+      /* Execve expects the command name to be in args[0].  So we
+	 leave it there, in the same format that the user used to
+	 type it in. */
+      args = strvec_from_word_list (words, 0, 0, (int *)NULL);
+      exit (shell_execve (command, args, export_env));
+    }
+  else
+    {
+parent_return:
+      QUIT;
+
+      /* Make sure that the pipes are closed in the parent. */
+      close_pipes (pipe_in, pipe_out);
+#if defined (PROCESS_SUBSTITUTION) && defined (HAVE_DEV_FD)
+#if 0
+      if (variable_context == 0)
+        unlink_fifo_list ();
+#endif
+#endif
+      FREE (command);
+      return (result);
+    }
+}
+
+/* CPP defines to decide whether a particular index into the #! line
+   corresponds to a valid interpreter name or argument character, or
+   whitespace.  The MSDOS define is to allow \r to be treated the same
+   as \n. */
+
+#if !defined (MSDOS)
+#  define STRINGCHAR(ind) \
+    (ind < sample_len && !whitespace (sample[ind]) && sample[ind] != '\n')
+#  define WHITECHAR(ind) \
+    (ind < sample_len && whitespace (sample[ind]))
+#else	/* MSDOS */
+#  define STRINGCHAR(ind) \
+    (ind < sample_len && !whitespace (sample[ind]) && sample[ind] != '\n' && sample[ind] != '\r')
+#  define WHITECHAR(ind) \
+    (ind < sample_len && whitespace (sample[ind]))
+#endif	/* MSDOS */
+
+static char *
+getinterp (sample, sample_len, endp)
+     char *sample;
+     int sample_len, *endp;
+{
+  register int i;
+  char *execname;
+  int start;
+
+  /* Find the name of the interpreter to exec. */
+  for (i = 2; i < sample_len && whitespace (sample[i]); i++)
+    ;
+
+  for (start = i; STRINGCHAR(i); i++)
+    ;
+
+  execname = substring (sample, start, i);
+
+  if (endp)
+    *endp = i;
+  return execname;
+}
+
+#if !defined (HAVE_HASH_BANG_EXEC)
+/* If the operating system on which we're running does not handle
+   the #! executable format, then help out.  SAMPLE is the text read
+   from the file, SAMPLE_LEN characters.  COMMAND is the name of
+   the script; it and ARGS, the arguments given by the user, will
+   become arguments to the specified interpreter.  ENV is the environment
+   to pass to the interpreter.
+
+   The word immediately following the #! is the interpreter to execute.
+   A single argument to the interpreter is allowed. */
+
+static int
+execute_shell_script (sample, sample_len, command, args, env)
+     char *sample;
+     int sample_len;
+     char *command;
+     char **args, **env;
+{
+  char *execname, *firstarg;
+  int i, start, size_increment, larry;
+
+  /* Find the name of the interpreter to exec. */
+  execname = getinterp (sample, sample_len, &i);
+  size_increment = 1;
+
+  /* Now the argument, if any. */
+  for (firstarg = (char *)NULL, start = i; WHITECHAR(i); i++)
+    ;
+
+  /* If there is more text on the line, then it is an argument for the
+     interpreter. */
+
+  if (STRINGCHAR(i))  
+    {
+      for (start = i; STRINGCHAR(i); i++)
+	;
+      firstarg = substring ((char *)sample, start, i);
+      size_increment = 2;
+    }
+
+  larry = strvec_len (args) + size_increment;
+  args = strvec_resize (args, larry + 1);
+
+  for (i = larry - 1; i; i--)
+    args[i] = args[i - size_increment];
+
+  args[0] = execname;
+  if (firstarg)
+    {
+      args[1] = firstarg;
+      args[2] = command;
+    }
+  else
+    args[1] = command;
+
+  args[larry] = (char *)NULL;
+
+  return (shell_execve (execname, args, env));
+}
+#undef STRINGCHAR
+#undef WHITECHAR
+
+#endif /* !HAVE_HASH_BANG_EXEC */
+
+static void
+initialize_subshell ()
+{
+#if defined (ALIAS)
+  /* Forget about any aliases that we knew of.  We are in a subshell. */
+  delete_all_aliases ();
+#endif /* ALIAS */
+
+#if defined (HISTORY)
+  /* Forget about the history lines we have read.  This is a non-interactive
+     subshell. */
+  history_lines_this_session = 0;
+#endif
+
+  /* Forget about the way job control was working. We are in a subshell. */
+  without_job_control ();
+
+#if defined (JOB_CONTROL)
+  set_sigchld_handler ();
+  init_job_stats ();
+#endif /* JOB_CONTROL */
+
+  /* Reset the values of the shell flags and options. */
+  reset_shell_flags ();
+  reset_shell_options ();
+  reset_shopt_options ();
+
+  /* Zero out builtin_env, since this could be a shell script run from a
+     sourced file with a temporary environment supplied to the `source/.'
+     builtin.  Such variables are not supposed to be exported (empirical
+     testing with sh and ksh).  Just throw it away; don't worry about a
+     memory leak. */
+  if (vc_isbltnenv (shell_variables))
+    shell_variables = shell_variables->down;
+
+  clear_unwind_protect_list (0);
+  /* XXX -- are there other things we should be resetting here? */
+  parse_and_execute_level = 0;		/* nothing left to restore it */
+
+  /* We're no longer inside a shell function. */
+  variable_context = return_catch_flag = funcnest = evalnest = sourcenest = 0;
+
+  executing_list = 0;		/* XXX */
+
+  /* If we're not interactive, close the file descriptor from which we're
+     reading the current shell script. */
+  if (interactive_shell == 0)
+    unset_bash_input (0);
+}
+
+#if defined (HAVE_SETOSTYPE) && defined (_POSIX_SOURCE)
+#  define SETOSTYPE(x)	__setostype(x)
+#else
+#  define SETOSTYPE(x)
+#endif
+
+#define HASH_BANG_BUFSIZ	128
+
+#define READ_SAMPLE_BUF(file, buf, len) \
+  do \
+    { \
+      fd = open(file, O_RDONLY); \
+      if (fd >= 0) \
+	{ \
+	  len = read (fd, buf, HASH_BANG_BUFSIZ); \
+	  close (fd); \
+	} \
+      else \
+	len = -1; \
+    } \
+  while (0)
+      
+/* Call execve (), handling interpreting shell scripts, and handling
+   exec failures. */
+int
+shell_execve (command, args, env)
+     char *command;
+     char **args, **env;
+{
+  int larray, i, fd;
+  char sample[HASH_BANG_BUFSIZ];
+  int sample_len;
+
+  SETOSTYPE (0);		/* Some systems use for USG/POSIX semantics */
+  execve (command, args, env);
+  i = errno;			/* error from execve() */
+  CHECK_TERMSIG;
+  SETOSTYPE (1);
+
+  /* If we get to this point, then start checking out the file.
+     Maybe it is something we can hack ourselves. */
+  if (i != ENOEXEC)
+    {
+      /* make sure this is set correctly for file_error/report_error */
+      last_command_exit_value = (i == ENOENT) ?  EX_NOTFOUND : EX_NOEXEC; /* XXX Posix.2 says that exit status is 126 */
+      if (file_isdir (command))
+#if defined (EISDIR)
+	internal_error (_("%s: %s"), command, strerror (EISDIR));
+#else
+	internal_error (_("%s: is a directory"), command);
+#endif
+      else if (executable_file (command) == 0)
+	{
+	  errno = i;
+	  file_error (command);
+	}
+      /* errors not involving the path argument to execve. */
+      else if (i == E2BIG || i == ENOMEM)
+	{
+	  errno = i;
+	  file_error (command);
+	}
+      else
+	{
+	  /* The file has the execute bits set, but the kernel refuses to
+	     run it for some reason.  See why. */
+#if defined (HAVE_HASH_BANG_EXEC)
+	  READ_SAMPLE_BUF (command, sample, sample_len);
+	  if (sample_len > 0)
+	    sample[sample_len - 1] = '\0';
+	  if (sample_len > 2 && sample[0] == '#' && sample[1] == '!')
+	    {
+	      char *interp;
+	      int ilen;
+
+	      interp = getinterp (sample, sample_len, (int *)NULL);
+	      ilen = strlen (interp);
+	      errno = i;
+	      if (interp[ilen - 1] == '\r')
+		{
+		  interp = xrealloc (interp, ilen + 2);
+		  interp[ilen - 1] = '^';
+		  interp[ilen] = 'M';
+		  interp[ilen + 1] = '\0';
+		}
+	      sys_error (_("%s: %s: bad interpreter"), command, interp ? interp : "");
+	      FREE (interp);
+	      return (EX_NOEXEC);
+	    }
+#endif
+	  errno = i;
+	  file_error (command);
+	}
+      return (last_command_exit_value);
+    }
+
+  /* This file is executable.
+     If it begins with #!, then help out people with losing operating
+     systems.  Otherwise, check to see if it is a binary file by seeing
+     if the contents of the first line (or up to 80 characters) are in the
+     ASCII set.  If it's a text file, execute the contents as shell commands,
+     otherwise return 126 (EX_BINARY_FILE). */
+  READ_SAMPLE_BUF (command, sample, sample_len);
+
+  if (sample_len == 0)
+    return (EXECUTION_SUCCESS);
+
+  /* Is this supposed to be an executable script?
+     If so, the format of the line is "#! interpreter [argument]".
+     A single argument is allowed.  The BSD kernel restricts
+     the length of the entire line to 32 characters (32 bytes
+     being the size of the BSD exec header), but we allow 80
+     characters. */
+  if (sample_len > 0)
+    {
+#if !defined (HAVE_HASH_BANG_EXEC)
+      if (sample_len > 2 && sample[0] == '#' && sample[1] == '!')
+	return (execute_shell_script (sample, sample_len, command, args, env));
+      else
+#endif
+      if (check_binary_file (sample, sample_len))
+	{
+	  internal_error (_("%s: cannot execute binary file: %s"), command, strerror (i));
+	  errno = i;
+	  return (EX_BINARY_FILE);
+	}
+    }
+
+  /* We have committed to attempting to execute the contents of this file
+     as shell commands. */
+
+  reset_parser ();
+  initialize_subshell ();
+
+  set_sigint_handler ();
+
+  /* Insert the name of this shell into the argument list. */
+  larray = strvec_len (args) + 1;
+  args = strvec_resize (args, larray + 1);
+
+  for (i = larray - 1; i; i--)
+    args[i] = args[i - 1];
+
+  args[0] = shell_name;
+  args[1] = command;
+  args[larray] = (char *)NULL;
+
+  if (args[0][0] == '-')
+    args[0]++;
+
+#if defined (RESTRICTED_SHELL)
+  if (restricted)
+    change_flag ('r', FLAG_OFF);
+#endif
+
+  if (subshell_argv)
+    {
+      /* Can't free subshell_argv[0]; that is shell_name. */
+      for (i = 1; i < subshell_argc; i++)
+	free (subshell_argv[i]);
+      free (subshell_argv);
+    }
+
+  dispose_command (currently_executing_command);	/* XXX */
+  currently_executing_command = (COMMAND *)NULL;
+
+  subshell_argc = larray;
+  subshell_argv = args;
+  subshell_envp = env;
+
+  unbind_args ();	/* remove the positional parameters */
+
+#if defined (PROCESS_SUBSTITUTION) && defined (HAVE_DEV_FD)
+  clear_fifo_list ();	/* pipe fds are what they are now */
+#endif
+
+  sh_longjmp (subshell_top_level, 1);
+  /*NOTREACHED*/
+}
+
+static int
+execute_intern_function (name, funcdef)
+     WORD_DESC *name;
+     FUNCTION_DEF *funcdef;
+{
+  SHELL_VAR *var;
+  char *t;
+
+  if (check_identifier (name, posixly_correct) == 0)
+    {
+      if (posixly_correct && interactive_shell == 0)
+	{
+	  last_command_exit_value = EX_BADUSAGE;
+	  jump_to_top_level (ERREXIT);
+	}
+      return (EXECUTION_FAILURE);
+    }
+
+  if (strchr (name->word, CTLESC))	/* WHY? */
+    {
+      t = dequote_escapes (name->word);
+      free (name->word);
+      name->word = t;
+    }
+
+  /* Posix interpretation 383 */
+  if (posixly_correct && find_special_builtin (name->word))
+    {
+      internal_error (_("`%s': is a special builtin"), name->word);
+      last_command_exit_value = EX_BADUSAGE;
+      jump_to_top_level (interactive_shell ? DISCARD : ERREXIT);
+    }
+
+  var = find_function (name->word);
+  if (var && (readonly_p (var) || noassign_p (var)))
+    {
+      if (readonly_p (var))
+	internal_error (_("%s: readonly function"), var->name);
+      return (EXECUTION_FAILURE);
+    }
+
+#if defined (DEBUGGER)
+  bind_function_def (name->word, funcdef, 1);
+#endif
+
+  bind_function (name->word, funcdef->command);
+  return (EXECUTION_SUCCESS);
+}
+
+#if defined (INCLUDE_UNUSED)
+#if defined (PROCESS_SUBSTITUTION)
+void
+close_all_files ()
+{
+  register int i, fd_table_size;
+
+  fd_table_size = getdtablesize ();
+  if (fd_table_size > 256)	/* clamp to a reasonable value */
+    fd_table_size = 256;
+
+  for (i = 3; i < fd_table_size; i++)
+    close (i);
+}
+#endif /* PROCESS_SUBSTITUTION */
+#endif
+
+static void
+close_pipes (in, out)
+     int in, out;
+{
+  if (in >= 0)
+    close (in);
+  if (out >= 0)
+    close (out);
+}
+
+static void
+dup_error (oldd, newd)
+     int oldd, newd;
+{
+  sys_error (_("cannot duplicate fd %d to fd %d"), oldd, newd);
+}
+
+/* Redirect input and output to be from and to the specified pipes.
+   NO_PIPE and REDIRECT_BOTH are handled correctly. */
+static void
+do_piping (pipe_in, pipe_out)
+     int pipe_in, pipe_out;
+{
+  if (pipe_in != NO_PIPE)
+    {
+      if (dup2 (pipe_in, 0) < 0)
+	dup_error (pipe_in, 0);
+      if (pipe_in > 0)
+	close (pipe_in);
+#ifdef __CYGWIN__
+      /* Let stdio know the fd may have changed from text to binary mode. */
+      freopen (NULL, "r", stdin);
+#endif /* __CYGWIN__ */
+    }
+  if (pipe_out != NO_PIPE)
+    {
+      if (pipe_out != REDIRECT_BOTH)
+	{
+	  if (dup2 (pipe_out, 1) < 0)
+	    dup_error (pipe_out, 1);
+	  if (pipe_out == 0 || pipe_out > 1)
+	    close (pipe_out);
+	}
+      else
+	{
+	  if (dup2 (1, 2) < 0)
+	    dup_error (1, 2);
+	}
+#ifdef __CYGWIN__
+      /* Let stdio know the fd may have changed from text to binary mode, and
+	 make sure to preserve stdout line buffering. */
+      freopen (NULL, "w", stdout);
+      sh_setlinebuf (stdout);
+#endif /* __CYGWIN__ */
+    }
+}
diff --git a/execute_cmd.h b/execute_cmd.h
new file mode 100644
index 0000000..465030a
--- /dev/null
+++ b/execute_cmd.h
@@ -0,0 +1,123 @@
+/* execute_cmd.h - functions from execute_cmd.c. */
+
+/* Copyright (C) 1993-2017 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_EXECUTE_CMD_H_)
+#define _EXECUTE_CMD_H_
+
+#include "stdc.h"
+
+#if defined (ARRAY_VARS)
+struct func_array_state
+  {
+    ARRAY *funcname_a;
+    SHELL_VAR *funcname_v;
+    ARRAY *source_a;
+    SHELL_VAR *source_v;
+    ARRAY *lineno_a;
+    SHELL_VAR *lineno_v;
+  };
+#endif
+
+/* Placeholder for later expansion to include more execution state */
+/* XXX - watch out for pid_t */
+struct execstate
+  {
+    pid_t pid;
+    int subshell_env;
+  };
+	
+
+/* Variables declared in execute_cmd.c, used by many other files */
+extern int return_catch_flag;
+extern int return_catch_value;
+extern volatile int last_command_exit_value;
+extern int last_command_exit_signal;
+extern int builtin_ignoring_errexit;
+extern int executing_builtin;
+extern int executing_list;
+extern int comsub_ignore_return;
+extern int subshell_level;
+extern int match_ignore_case;
+extern int executing_command_builtin;
+extern int funcnest, funcnest_max;
+extern int evalnest, evalnest_max;
+extern int sourcenest, sourcenest_max;
+extern int stdin_redir;
+extern int line_number_for_err_trap;
+
+extern char *the_printed_command_except_trap;
+
+extern char *this_command_name;
+extern SHELL_VAR *this_shell_function;
+
+/* Functions declared in execute_cmd.c, used by many other files */
+
+extern struct fd_bitmap *new_fd_bitmap PARAMS((int));
+extern void dispose_fd_bitmap PARAMS((struct fd_bitmap *));
+extern void close_fd_bitmap PARAMS((struct fd_bitmap *));
+extern int executing_line_number PARAMS((void));
+extern int execute_command PARAMS((COMMAND *));
+extern int execute_command_internal PARAMS((COMMAND *, int, int, int, struct fd_bitmap *));
+extern int shell_execve PARAMS((char *, char **, char **));
+extern void setup_async_signals PARAMS((void));
+extern void async_redirect_stdin PARAMS((void));
+
+extern void undo_partial_redirects PARAMS((void));
+extern void dispose_partial_redirects PARAMS((void));
+extern void dispose_exec_redirects PARAMS((void));
+
+extern int execute_shell_function PARAMS((SHELL_VAR *, WORD_LIST *));
+
+extern struct coproc *getcoprocbypid PARAMS((pid_t));
+extern struct coproc *getcoprocbyname PARAMS((const char *));
+
+extern void coproc_init PARAMS((struct coproc *));
+extern struct coproc *coproc_alloc PARAMS((char *, pid_t));
+extern void coproc_dispose PARAMS((struct coproc *));
+extern void coproc_flush PARAMS((void));
+extern void coproc_close PARAMS((struct coproc *));
+extern void coproc_closeall PARAMS((void));
+extern void coproc_reap PARAMS((void));
+extern pid_t coproc_active PARAMS((void));
+
+extern void coproc_rclose PARAMS((struct coproc *, int));
+extern void coproc_wclose PARAMS((struct coproc *, int));
+extern void coproc_fdclose PARAMS((struct coproc *, int));
+
+extern void coproc_checkfd PARAMS((struct coproc *, int));
+extern void coproc_fdchk PARAMS((int));
+
+extern void coproc_pidchk PARAMS((pid_t, int));
+
+extern void coproc_fdsave PARAMS((struct coproc *));
+extern void coproc_fdrestore PARAMS((struct coproc *));
+
+extern void coproc_setvars PARAMS((struct coproc *));
+extern void coproc_unsetvars PARAMS((struct coproc *));
+
+#if defined (PROCESS_SUBSTITUTION)
+extern void close_all_files PARAMS((void));
+#endif
+
+#if defined (ARRAY_VARS)
+extern void restore_funcarray_state PARAMS((struct func_array_state *));
+#endif
+
+#endif /* _EXECUTE_CMD_H_ */
diff --git a/expr.c b/expr.c
new file mode 100644
index 0000000..bbff95e
--- /dev/null
+++ b/expr.c
@@ -0,0 +1,1671 @@
+/* expr.c -- arithmetic expression evaluation. */
+
+/* Copyright (C) 1990-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ All arithmetic is done as intmax_t integers with no checking for overflow
+ (though division by 0 is caught and flagged as an error).
+
+ The following operators are handled, grouped into a set of levels in
+ order of decreasing precedence.
+
+	"id++", "id--"		[post-increment and post-decrement]
+	"-", "+"		[(unary operators)]
+	"++id", "--id"		[pre-increment and pre-decrement]
+	"!", "~"
+	"**"			[(exponentiation)]
+	"*", "/", "%"
+	"+", "-"
+	"<<", ">>"
+	"<=", ">=", "<", ">"
+	"==", "!="
+	"&"
+	"^"
+	"|"
+	"&&"
+	"||"
+	"expr ? expr : expr"
+	"=", "*=", "/=", "%=", "+=", "-=", "<<=", ">>=", "&=", "^=", "|="
+	,			[comma]
+
+ (Note that most of these operators have special meaning to bash, and an
+ entire expression should be quoted, e.g. "a=$a+1" or "a=a+1" to ensure
+ that it is passed intact to the evaluator when using `let'.  When using
+ the $[] or $(( )) forms, the text between the `[' and `]' or `((' and `))'
+ is treated as if in double quotes.)
+
+ Sub-expressions within parentheses have a precedence level greater than
+ all of the above levels and are evaluated first.  Within a single prece-
+ dence group, evaluation is left-to-right, except for the arithmetic
+ assignment operator (`='), which is evaluated right-to-left (as in C).
+
+ The expression evaluator returns the value of the expression (assignment
+ statements have as a value what is returned by the RHS).  The `let'
+ builtin, on the other hand, returns 0 if the last expression evaluates to
+ a non-zero, and 1 otherwise.
+
+ Implementation is a recursive-descent parser.
+
+ Chet Ramey
+ chet@po.cwru.edu
+*/
+
+#include "config.h"
+
+#include <stdio.h>
+#include "bashansi.h"
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include "chartypes.h"
+#include "bashintl.h"
+
+#include "shell.h"
+#include "arrayfunc.h"
+#include "execute_cmd.h"
+#include "flags.h"
+#include "subst.h"
+#include "typemax.h"		/* INTMAX_MAX, INTMAX_MIN */
+
+/* Because of the $((...)) construct, expressions may include newlines.
+   Here is a macro which accepts newlines, tabs and spaces as whitespace. */
+#define cr_whitespace(c) (whitespace(c) || ((c) == '\n'))
+
+/* Size be which the expression stack grows when necessary. */
+#define EXPR_STACK_GROW_SIZE 10
+
+/* Maximum amount of recursion allowed.  This prevents a non-integer
+   variable such as "num=num+2" from infinitely adding to itself when
+   "let num=num+2" is given. */
+#define MAX_EXPR_RECURSION_LEVEL 1024
+
+/* The Tokens.  Singing "The Lion Sleeps Tonight". */
+
+#define EQEQ	1	/* "==" */
+#define NEQ	2	/* "!=" */
+#define LEQ	3	/* "<=" */
+#define GEQ	4	/* ">=" */
+#define STR	5	/* string */
+#define NUM	6	/* number */
+#define LAND	7	/* "&&" Logical AND */
+#define LOR	8	/* "||" Logical OR */
+#define LSH	9	/* "<<" Left SHift */
+#define RSH    10	/* ">>" Right SHift */
+#define OP_ASSIGN 11	/* op= expassign as in Posix.2 */
+#define COND	12	/* exp1 ? exp2 : exp3 */
+#define POWER	13	/* exp1**exp2 */
+#define PREINC	14	/* ++var */
+#define PREDEC	15	/* --var */
+#define POSTINC	16	/* var++ */
+#define POSTDEC	17	/* var-- */
+#define EQ	'='
+#define GT	'>'
+#define LT	'<'
+#define PLUS	'+'
+#define MINUS	'-'
+#define MUL	'*'
+#define DIV	'/'
+#define MOD	'%'
+#define NOT	'!'
+#define LPAR	'('
+#define RPAR	')'
+#define BAND	'&'	/* Bitwise AND */
+#define BOR	'|'	/* Bitwise OR. */
+#define BXOR	'^'	/* Bitwise eXclusive OR. */
+#define BNOT	'~'	/* Bitwise NOT; Two's complement. */
+#define QUES	'?'
+#define COL	':'
+#define COMMA	','
+
+/* This should be the function corresponding to the operator with the
+   highest precedence. */
+#define EXP_HIGHEST	expcomma
+
+#ifndef MAX_INT_LEN
+#  define MAX_INT_LEN 32
+#endif
+
+struct lvalue
+{
+  char *tokstr;		/* possibly-rewritten lvalue if not NULL */
+  intmax_t tokval;	/* expression evaluated value */
+  SHELL_VAR *tokvar;	/* variable described by array or var reference */
+  intmax_t ind;		/* array index if not -1 */
+};
+
+/* A structure defining a single expression context. */
+typedef struct {
+  int curtok, lasttok;
+  char *expression, *tp, *lasttp;
+  intmax_t tokval;
+  char *tokstr;
+  int noeval;
+  struct lvalue lval;
+} EXPR_CONTEXT;
+
+static char	*expression;	/* The current expression */
+static char	*tp;		/* token lexical position */
+static char	*lasttp;	/* pointer to last token position */
+static int	curtok;		/* the current token */
+static int	lasttok;	/* the previous token */
+static int	assigntok;	/* the OP in OP= */
+static char	*tokstr;	/* current token string */
+static intmax_t	tokval;		/* current token value */
+static int	noeval;		/* set to 1 if no assignment to be done */
+static procenv_t evalbuf;
+
+/* set to 1 if the expression has already been run through word expansion */
+static int	already_expanded;
+
+static struct lvalue curlval = {0, 0, 0, -1};
+static struct lvalue lastlval = {0, 0, 0, -1};
+
+static int	_is_arithop PARAMS((int));
+static void	readtok PARAMS((void));	/* lexical analyzer */
+
+static void	init_lvalue PARAMS((struct lvalue *));
+static struct lvalue *alloc_lvalue PARAMS((void));
+static void	free_lvalue PARAMS((struct lvalue *));
+
+static intmax_t	expr_streval PARAMS((char *, int, struct lvalue *));
+static intmax_t	strlong PARAMS((char *));
+static void	evalerror PARAMS((const char *));
+
+static void	pushexp PARAMS((void));
+static void	popexp PARAMS((void));
+static void	expr_unwind PARAMS((void));
+static void	expr_bind_variable PARAMS((char *, char *));
+#if defined (ARRAY_VARS)
+static void	expr_bind_array_element PARAMS((char *, arrayind_t, char *));
+#endif
+
+static intmax_t subexpr PARAMS((char *));
+
+static intmax_t	expcomma PARAMS((void));
+static intmax_t expassign PARAMS((void));
+static intmax_t	expcond PARAMS((void));
+static intmax_t explor PARAMS((void));
+static intmax_t expland PARAMS((void));
+static intmax_t	expbor PARAMS((void));
+static intmax_t	expbxor PARAMS((void));
+static intmax_t	expband PARAMS((void));
+static intmax_t exp5 PARAMS((void));
+static intmax_t exp4 PARAMS((void));
+static intmax_t expshift PARAMS((void));
+static intmax_t exp3 PARAMS((void));
+static intmax_t expmuldiv PARAMS((void));
+static intmax_t	exppower PARAMS((void));
+static intmax_t exp1 PARAMS((void));
+static intmax_t exp0 PARAMS((void));
+
+/* Global var which contains the stack of expression contexts. */
+static EXPR_CONTEXT **expr_stack;
+static int expr_depth;		   /* Location in the stack. */
+static int expr_stack_size;	   /* Number of slots already allocated. */
+
+#if defined (ARRAY_VARS)
+extern const char * const bash_badsub_errmsg;
+#endif
+
+#define SAVETOK(X) \
+  do { \
+    (X)->curtok = curtok; \
+    (X)->lasttok = lasttok; \
+    (X)->tp = tp; \
+    (X)->lasttp = lasttp; \
+    (X)->tokval = tokval; \
+    (X)->tokstr = tokstr; \
+    (X)->noeval = noeval; \
+    (X)->lval = curlval; \
+  } while (0)
+
+#define RESTORETOK(X) \
+  do { \
+    curtok = (X)->curtok; \
+    lasttok = (X)->lasttok; \
+    tp = (X)->tp; \
+    lasttp = (X)->lasttp; \
+    tokval = (X)->tokval; \
+    tokstr = (X)->tokstr; \
+    noeval = (X)->noeval; \
+    curlval = (X)->lval; \
+  } while (0)
+
+/* Push and save away the contents of the globals describing the
+   current expression context. */
+static void
+pushexp ()
+{
+  EXPR_CONTEXT *context;
+
+  if (expr_depth >= MAX_EXPR_RECURSION_LEVEL)
+    evalerror (_("expression recursion level exceeded"));
+
+  if (expr_depth >= expr_stack_size)
+    {
+      expr_stack_size += EXPR_STACK_GROW_SIZE;
+      expr_stack = (EXPR_CONTEXT **)xrealloc (expr_stack, expr_stack_size * sizeof (EXPR_CONTEXT *));
+    }
+
+  context = (EXPR_CONTEXT *)xmalloc (sizeof (EXPR_CONTEXT));
+
+  context->expression = expression;
+  SAVETOK(context);
+
+  expr_stack[expr_depth++] = context;
+}
+
+/* Pop the the contents of the expression context stack into the
+   globals describing the current expression context. */
+static void
+popexp ()
+{
+  EXPR_CONTEXT *context;
+
+  if (expr_depth <= 0)
+    {
+      /* See the comment at the top of evalexp() for an explanation of why
+	 this is done. */
+      expression = lasttp = 0;
+      evalerror (_("recursion stack underflow"));
+    }
+
+  context = expr_stack[--expr_depth];
+
+  expression = context->expression;
+  RESTORETOK (context);
+
+  free (context);
+}
+
+static void
+expr_unwind ()
+{
+  while (--expr_depth > 0)
+    {
+      if (expr_stack[expr_depth]->tokstr)
+	free (expr_stack[expr_depth]->tokstr);
+
+      if (expr_stack[expr_depth]->expression)
+	free (expr_stack[expr_depth]->expression);
+
+      free (expr_stack[expr_depth]);
+    }
+  if (expr_depth == 0)
+    free (expr_stack[expr_depth]);	/* free the allocated EXPR_CONTEXT */
+
+  noeval = 0;	/* XXX */
+}
+
+static void
+expr_bind_variable (lhs, rhs)
+     char *lhs, *rhs;
+{
+  SHELL_VAR *v;
+  int aflags;
+
+  if (lhs == 0 || *lhs == 0)
+    return;		/* XXX */
+
+#if defined (ARRAY_VARS)
+  aflags = (assoc_expand_once && already_expanded) ? ASS_NOEXPAND : 0;
+#else
+  aflags = 0;
+#endif
+  v = bind_int_variable (lhs, rhs, aflags);
+  if (v && (readonly_p (v) || noassign_p (v)))
+    sh_longjmp (evalbuf, 1);	/* variable assignment error */
+  stupidly_hack_special_variables (lhs);
+}
+
+#if defined (ARRAY_VARS)
+/* This is similar to the logic in arrayfunc.c:valid_array_subscript when
+   you pass VA_NOEXPAND. */
+static int
+expr_skipsubscript (vp, cp)
+     char *vp, *cp;
+{
+  int flags, isassoc;
+  SHELL_VAR *entry;
+
+  isassoc = 0;
+  entry = 0;
+  if (assoc_expand_once & already_expanded)
+    {
+      *cp = '\0';
+      isassoc = legal_identifier (vp) && (entry = find_variable (vp)) && assoc_p (entry);
+      *cp = '[';	/* ] */
+    }
+  flags = (isassoc && assoc_expand_once && already_expanded) ? VA_NOEXPAND : 0;
+  return (skipsubscript (cp, 0, flags));
+}
+
+/* Rewrite tok, which is of the form vname[expression], to vname[ind], where
+   IND is the already-calculated value of expression. */
+static void
+expr_bind_array_element (tok, ind, rhs)
+     char *tok;
+     arrayind_t ind;
+     char *rhs;
+{
+  char *lhs, *vname;
+  size_t llen;
+  char ibuf[INT_STRLEN_BOUND (arrayind_t) + 1], *istr;
+
+  istr = fmtumax (ind, 10, ibuf, sizeof (ibuf), 0);
+  vname = array_variable_name (tok, 0, (char **)NULL, (int *)NULL);
+
+  llen = strlen (vname) + sizeof (ibuf) + 3;
+  lhs = xmalloc (llen);
+
+  sprintf (lhs, "%s[%s]", vname, istr);		/* XXX */
+  
+/*itrace("expr_bind_array_element: %s=%s", lhs, rhs);*/
+  expr_bind_variable (lhs, rhs);
+  free (vname);
+  free (lhs);
+}
+#endif /* ARRAY_VARS */
+
+/* Evaluate EXPR, and return the arithmetic result.  If VALIDP is
+   non-null, a zero is stored into the location to which it points
+   if the expression is invalid, non-zero otherwise.  If a non-zero
+   value is returned in *VALIDP, the return value of evalexp() may
+   be used.
+
+   The `while' loop after the longjmp is caught relies on the above
+   implementation of pushexp and popexp leaving in expr_stack[0] the
+   values that the variables had when the program started.  That is,
+   the first things saved are the initial values of the variables that
+   were assigned at program startup or by the compiler.  Therefore, it is
+   safe to let the loop terminate when expr_depth == 0, without freeing up
+   any of the expr_depth[0] stuff. */
+intmax_t
+evalexp (expr, flags, validp)
+     char *expr;
+     int flags;
+     int *validp;
+{
+  intmax_t val;
+  int c;
+  procenv_t oevalbuf;
+
+  val = 0;
+  noeval = 0;
+  already_expanded = (flags&EXP_EXPANDED);
+
+  FASTCOPY (evalbuf, oevalbuf, sizeof (evalbuf));
+
+  c = setjmp_nosigs (evalbuf);
+
+  if (c)
+    {
+      FREE (tokstr);
+      FREE (expression);
+      tokstr = expression = (char *)NULL;
+
+      expr_unwind ();
+      expr_depth = 0;	/* XXX - make sure */
+
+      /* We copy in case we've called evalexp recursively */
+      FASTCOPY (oevalbuf, evalbuf, sizeof (evalbuf));
+
+      if (validp)
+	*validp = 0;
+      return (0);
+    }
+
+  val = subexpr (expr);
+
+  if (validp)
+    *validp = 1;
+
+  FASTCOPY (oevalbuf, evalbuf, sizeof (evalbuf));
+
+  return (val);
+}
+
+static intmax_t
+subexpr (expr)
+     char *expr;
+{
+  intmax_t val;
+  char *p;
+
+  for (p = expr; p && *p && cr_whitespace (*p); p++)
+    ;
+
+  if (p == NULL || *p == '\0')
+    return (0);
+
+  pushexp ();
+  expression = savestring (expr);
+  tp = expression;
+
+  curtok = lasttok = 0;
+  tokstr = (char *)NULL;
+  tokval = 0;
+  init_lvalue (&curlval);
+  lastlval = curlval;
+
+  readtok ();
+
+  val = EXP_HIGHEST ();
+
+  if (curtok != 0)
+    evalerror (_("syntax error in expression"));
+
+  FREE (tokstr);
+  FREE (expression);
+
+  popexp ();
+
+  return val;
+}
+
+static intmax_t
+expcomma ()
+{
+  register intmax_t value;
+
+  value = expassign ();
+  while (curtok == COMMA)
+    {
+      readtok ();
+      value = expassign ();
+    }
+
+  return value;
+}
+  
+static intmax_t
+expassign ()
+{
+  register intmax_t value;
+  char *lhs, *rhs;
+  arrayind_t lind;
+#if defined (HAVE_IMAXDIV)
+  imaxdiv_t idiv;
+#endif
+
+  value = expcond ();
+  if (curtok == EQ || curtok == OP_ASSIGN)
+    {
+      int special, op;
+      intmax_t lvalue;
+
+      special = curtok == OP_ASSIGN;
+
+      if (lasttok != STR)
+	evalerror (_("attempted assignment to non-variable"));
+
+      if (special)
+	{
+	  op = assigntok;		/* a OP= b */
+	  lvalue = value;
+	}
+
+      if (tokstr == 0)
+	evalerror (_("syntax error in variable assignment"));
+
+      /* XXX - watch out for pointer aliasing issues here */
+      lhs = savestring (tokstr);
+      /* save ind in case rhs is string var and evaluation overwrites it */
+      lind = curlval.ind;
+      readtok ();
+      value = expassign ();
+
+      if (special)
+	{
+	  if ((op == DIV || op == MOD) && value == 0)
+	    {
+	      if (noeval == 0)
+		evalerror (_("division by 0"));
+	      else
+	        value = 1;
+	    }
+
+	  switch (op)
+	    {
+	    case MUL:
+	      /* Handle INTMAX_MIN and INTMAX_MAX * -1 specially here? */
+	      lvalue *= value;
+	      break;
+	    case DIV:
+	    case MOD:
+	      if (lvalue == INTMAX_MIN && value == -1)
+		lvalue = (op == DIV) ? INTMAX_MIN : 0;
+	      else
+#if HAVE_IMAXDIV
+		{
+		  idiv = imaxdiv (lvalue, value);
+		  lvalue = (op == DIV) ? idiv.quot : idiv.rem;
+		}
+#else
+	        lvalue = (op == DIV) ? lvalue / value : lvalue % value;
+#endif
+	      break;
+	    case PLUS:
+	      lvalue += value;
+	      break;
+	    case MINUS:
+	      lvalue -= value;
+	      break;
+	    case LSH:
+	      lvalue <<= value;
+	      break;
+	    case RSH:
+	      lvalue >>= value;
+	      break;
+	    case BAND:
+	      lvalue &= value;
+	      break;
+	    case BOR:
+	      lvalue |= value;
+	      break;
+	    case BXOR:
+	      lvalue ^= value;
+	      break;
+	    default:
+	      free (lhs);
+	      evalerror (_("bug: bad expassign token"));
+	      break;
+	    }
+	  value = lvalue;
+	}
+
+      rhs = itos (value);
+      if (noeval == 0)
+	{
+#if defined (ARRAY_VARS)
+	  if (lind != -1)
+	    expr_bind_array_element (lhs, lind, rhs);
+	  else
+#endif
+	    expr_bind_variable (lhs, rhs);
+	}
+      if (curlval.tokstr && curlval.tokstr == tokstr)
+	init_lvalue (&curlval);
+
+      free (rhs);
+      free (lhs);
+      FREE (tokstr);
+      tokstr = (char *)NULL;		/* For freeing on errors. */
+    }
+
+  return (value);
+}
+
+/* Conditional expression (expr?expr:expr) */
+static intmax_t
+expcond ()
+{
+  intmax_t cval, val1, val2, rval;
+  int set_noeval;
+
+  set_noeval = 0;
+  rval = cval = explor ();
+  if (curtok == QUES)		/* found conditional expr */
+    {
+      if (cval == 0)
+	{
+	  set_noeval = 1;
+	  noeval++;
+	}
+
+      readtok ();
+      if (curtok == 0 || curtok == COL)
+	evalerror (_("expression expected"));
+
+      val1 = EXP_HIGHEST ();
+
+      if (set_noeval)
+	noeval--;
+      if (curtok != COL)
+	evalerror (_("`:' expected for conditional expression"));
+
+      set_noeval = 0;
+      if (cval)
+ 	{
+ 	  set_noeval = 1;
+	  noeval++;
+ 	}
+
+      readtok ();
+      if (curtok == 0)
+	evalerror (_("expression expected"));
+      val2 = expcond ();
+
+      if (set_noeval)
+	noeval--;
+      rval = cval ? val1 : val2;
+      lasttok = COND;
+    }
+  return rval;
+}
+
+/* Logical OR. */
+static intmax_t
+explor ()
+{
+  register intmax_t val1, val2;
+  int set_noeval;
+
+  val1 = expland ();
+
+  while (curtok == LOR)
+    {
+      set_noeval = 0;
+      if (val1 != 0)
+	{
+	  noeval++;
+	  set_noeval = 1;
+	}
+      readtok ();
+      val2 = expland ();
+      if (set_noeval)
+	noeval--;
+      val1 = val1 || val2;
+      lasttok = LOR;
+    }
+
+  return (val1);
+}
+
+/* Logical AND. */
+static intmax_t
+expland ()
+{
+  register intmax_t val1, val2;
+  int set_noeval;
+
+  val1 = expbor ();
+
+  while (curtok == LAND)
+    {
+      set_noeval = 0;
+      if (val1 == 0)
+	{
+	  set_noeval = 1;
+	  noeval++;
+	}
+      readtok ();
+      val2 = expbor ();
+      if (set_noeval)
+	noeval--;
+      val1 = val1 && val2;
+      lasttok = LAND;
+    }
+
+  return (val1);
+}
+
+/* Bitwise OR. */
+static intmax_t
+expbor ()
+{
+  register intmax_t val1, val2;
+
+  val1 = expbxor ();
+
+  while (curtok == BOR)
+    {
+      readtok ();
+      val2 = expbxor ();
+      val1 = val1 | val2;
+      lasttok = NUM;
+    }
+
+  return (val1);
+}
+
+/* Bitwise XOR. */
+static intmax_t
+expbxor ()
+{
+  register intmax_t val1, val2;
+
+  val1 = expband ();
+
+  while (curtok == BXOR)
+    {
+      readtok ();
+      val2 = expband ();
+      val1 = val1 ^ val2;
+      lasttok = NUM;
+    }
+
+  return (val1);
+}
+
+/* Bitwise AND. */
+static intmax_t
+expband ()
+{
+  register intmax_t val1, val2;
+
+  val1 = exp5 ();
+
+  while (curtok == BAND)
+    {
+      readtok ();
+      val2 = exp5 ();
+      val1 = val1 & val2;
+      lasttok = NUM;
+    }
+
+  return (val1);
+}
+
+static intmax_t
+exp5 ()
+{
+  register intmax_t val1, val2;
+
+  val1 = exp4 ();
+
+  while ((curtok == EQEQ) || (curtok == NEQ))
+    {
+      int op = curtok;
+
+      readtok ();
+      val2 = exp4 ();
+      if (op == EQEQ)
+	val1 = (val1 == val2);
+      else if (op == NEQ)
+	val1 = (val1 != val2);
+      lasttok = NUM;
+    }
+  return (val1);
+}
+
+static intmax_t
+exp4 ()
+{
+  register intmax_t val1, val2;
+
+  val1 = expshift ();
+  while ((curtok == LEQ) ||
+	 (curtok == GEQ) ||
+	 (curtok == LT) ||
+	 (curtok == GT))
+    {
+      int op = curtok;
+
+      readtok ();
+      val2 = expshift ();
+
+      if (op == LEQ)
+	val1 = val1 <= val2;
+      else if (op == GEQ)
+	val1 = val1 >= val2;
+      else if (op == LT)
+	val1 = val1 < val2;
+      else			/* (op == GT) */
+	val1 = val1 > val2;
+      lasttok = NUM;
+    }
+  return (val1);
+}
+
+/* Left and right shifts. */
+static intmax_t
+expshift ()
+{
+  register intmax_t val1, val2;
+
+  val1 = exp3 ();
+
+  while ((curtok == LSH) || (curtok == RSH))
+    {
+      int op = curtok;
+
+      readtok ();
+      val2 = exp3 ();
+
+      if (op == LSH)
+	val1 = val1 << val2;
+      else
+	val1 = val1 >> val2;
+      lasttok = NUM;
+    }
+
+  return (val1);
+}
+
+static intmax_t
+exp3 ()
+{
+  register intmax_t val1, val2;
+
+  val1 = expmuldiv ();
+
+  while ((curtok == PLUS) || (curtok == MINUS))
+    {
+      int op = curtok;
+
+      readtok ();
+      val2 = expmuldiv ();
+
+      if (op == PLUS)
+	val1 += val2;
+      else if (op == MINUS)
+	val1 -= val2;
+      lasttok = NUM;
+    }
+  return (val1);
+}
+
+static intmax_t
+expmuldiv ()
+{
+  register intmax_t val1, val2;
+#if defined (HAVE_IMAXDIV)
+  imaxdiv_t idiv;
+#endif
+
+  val1 = exppower ();
+
+  while ((curtok == MUL) ||
+	 (curtok == DIV) ||
+	 (curtok == MOD))
+    {
+      int op = curtok;
+      char *stp, *sltp;
+
+      stp = tp;
+      readtok ();
+
+      val2 = exppower ();
+
+      /* Handle division by 0 and twos-complement arithmetic overflow */
+      if (((op == DIV) || (op == MOD)) && (val2 == 0))
+	{
+	  if (noeval == 0)
+	    {
+	      sltp = lasttp;
+	      lasttp = stp;
+	      while (lasttp && *lasttp && whitespace (*lasttp))
+		lasttp++;
+	      evalerror (_("division by 0"));
+	      lasttp = sltp;
+	    }
+	  else
+	    val2 = 1;
+	}
+      else if (op == MOD && val1 == INTMAX_MIN && val2 == -1)
+	{
+	  val1 = 0;
+	  continue;
+	}
+      else if (op == DIV && val1 == INTMAX_MIN && val2 == -1)
+	val2 = 1;
+
+      if (op == MUL)
+	val1 *= val2;
+      else if (op == DIV || op == MOD)
+#if defined (HAVE_IMAXDIV)
+	{
+	  idiv = imaxdiv (val1, val2);
+	  val1 = (op == DIV) ? idiv.quot : idiv.rem;
+	}
+#else
+	val1 = (op == DIV) ? val1 / val2 : val1 % val2;
+#endif
+      lasttok = NUM;
+    }
+  return (val1);
+}
+
+static intmax_t
+ipow (base, exp)
+     intmax_t base, exp;
+{
+  intmax_t result;
+
+  result = 1;
+  while (exp)
+    {
+      if (exp & 1)
+	result *= base;
+      exp >>= 1;
+      base *= base;
+    }
+  return result;
+}
+
+static intmax_t
+exppower ()
+{
+  register intmax_t val1, val2, c;
+
+  val1 = exp1 ();
+  while (curtok == POWER)
+    {
+      readtok ();
+      val2 = exppower ();	/* exponentiation is right-associative */
+      lasttok = NUM;
+      if (val2 == 0)
+	return (1);
+      if (val2 < 0)
+	evalerror (_("exponent less than 0"));
+      val1 = ipow (val1, val2);
+    }
+  return (val1);
+}
+
+static intmax_t
+exp1 ()
+{
+  register intmax_t val;
+
+  if (curtok == NOT)
+    {
+      readtok ();
+      val = !exp1 ();
+      lasttok = NUM;
+    }
+  else if (curtok == BNOT)
+    {
+      readtok ();
+      val = ~exp1 ();
+      lasttok = NUM;
+    }
+  else if (curtok == MINUS)
+    {
+      readtok ();
+      val = - exp1 ();
+      lasttok = NUM;
+    }
+  else if (curtok == PLUS)
+    {
+      readtok ();
+      val = exp1 ();
+      lasttok = NUM;
+    }
+  else
+    val = exp0 ();
+
+  return (val);
+}
+
+static intmax_t
+exp0 ()
+{
+  register intmax_t val = 0, v2;
+  char *vincdec;
+  int stok;
+  EXPR_CONTEXT ec;
+
+  /* XXX - might need additional logic here to decide whether or not
+	   pre-increment or pre-decrement is legal at this point. */
+  if (curtok == PREINC || curtok == PREDEC)
+    {
+      stok = lasttok = curtok;
+      readtok ();
+      if (curtok != STR)
+	/* readtok() catches this */
+	evalerror (_("identifier expected after pre-increment or pre-decrement"));
+
+      v2 = tokval + ((stok == PREINC) ? 1 : -1);
+      vincdec = itos (v2);
+      if (noeval == 0)
+	{
+#if defined (ARRAY_VARS)
+	  if (curlval.ind != -1)
+	    expr_bind_array_element (curlval.tokstr, curlval.ind, vincdec);
+	  else
+#endif
+	    if (tokstr)
+	      expr_bind_variable (tokstr, vincdec);
+	}
+      free (vincdec);
+      val = v2;
+
+      curtok = NUM;	/* make sure --x=7 is flagged as an error */
+      readtok ();
+    }
+  else if (curtok == LPAR)
+    {
+      /* XXX - save curlval here?  Or entire expression context? */
+      readtok ();
+      val = EXP_HIGHEST ();
+
+      if (curtok != RPAR) /* ( */
+	evalerror (_("missing `)'"));
+
+      /* Skip over closing paren. */
+      readtok ();
+    }
+  else if ((curtok == NUM) || (curtok == STR))
+    {
+      val = tokval;
+      if (curtok == STR)
+	{
+	  SAVETOK (&ec);
+	  tokstr = (char *)NULL;	/* keep it from being freed */
+          noeval = 1;
+          readtok ();
+          stok = curtok;
+
+	  /* post-increment or post-decrement */
+ 	  if (stok == POSTINC || stok == POSTDEC)
+ 	    {
+ 	      /* restore certain portions of EC */
+ 	      tokstr = ec.tokstr;
+ 	      noeval = ec.noeval;
+ 	      curlval = ec.lval;
+ 	      lasttok = STR;	/* ec.curtok */
+
+	      v2 = val + ((stok == POSTINC) ? 1 : -1);
+	      vincdec = itos (v2);
+	      if (noeval == 0)
+		{
+#if defined (ARRAY_VARS)
+		  if (curlval.ind != -1)
+		    expr_bind_array_element (curlval.tokstr, curlval.ind, vincdec);
+		  else
+#endif
+		    expr_bind_variable (tokstr, vincdec);
+		}
+	      free (vincdec);
+	      curtok = NUM;	/* make sure x++=7 is flagged as an error */
+ 	    }
+ 	  else
+ 	    {
+	      /* XXX - watch out for pointer aliasing issues here */
+	      if (stok == STR)	/* free new tokstr before old one is restored */
+		FREE (tokstr);
+	      RESTORETOK (&ec);
+ 	    }
+	}
+	  
+      readtok ();
+    }
+  else
+    evalerror (_("syntax error: operand expected"));
+
+  return (val);
+}
+
+static void
+init_lvalue (lv)
+     struct lvalue *lv;
+{
+  lv->tokstr = 0;
+  lv->tokvar = 0;
+  lv->tokval = lv->ind = -1;
+}
+
+static struct lvalue *
+alloc_lvalue ()
+{
+  struct lvalue *lv;
+
+  lv = xmalloc (sizeof (struct lvalue));
+  init_lvalue (lv);
+  return (lv);
+}
+
+static void
+free_lvalue (lv)
+     struct lvalue *lv;
+{
+  free (lv);		/* should be inlined */
+}
+
+static intmax_t
+expr_streval (tok, e, lvalue)
+     char *tok;
+     int e;
+     struct lvalue *lvalue;
+{
+  SHELL_VAR *v;
+  char *value;
+  intmax_t tval;
+  int initial_depth;
+#if defined (ARRAY_VARS)
+  arrayind_t ind;
+  int tflag, aflag;
+#endif
+
+/*itrace("expr_streval: %s: noeval = %d expanded=%d", tok, noeval, already_expanded);*/
+  /* If we are suppressing evaluation, just short-circuit here instead of
+     going through the rest of the evaluator. */
+  if (noeval)
+    return (0);
+
+  initial_depth = expr_depth;
+
+#if defined (ARRAY_VARS)
+  tflag = assoc_expand_once && already_expanded;	/* for a start */
+#endif
+
+  /* [[[[[ */
+#if defined (ARRAY_VARS)
+  aflag = (tflag) ? AV_NOEXPAND : 0;
+  v = (e == ']') ? array_variable_part (tok, tflag, (char **)0, (int *)0) : find_variable (tok);
+#else
+  v = find_variable (tok);
+#endif
+  if (v == 0 && e != ']')
+    v = find_variable_last_nameref (tok, 0);  
+
+  if ((v == 0 || invisible_p (v)) && unbound_vars_is_error)
+    {
+#if defined (ARRAY_VARS)
+      value = (e == ']') ? array_variable_name (tok, tflag, (char **)0, (int *)0) : tok;
+#else
+      value = tok;
+#endif
+
+      set_exit_status (EXECUTION_FAILURE);
+      err_unboundvar (value);
+
+#if defined (ARRAY_VARS)
+      if (e == ']')
+	FREE (value);	/* array_variable_name returns new memory */
+#endif
+
+      if (no_longjmp_on_fatal_error && interactive_shell)
+	sh_longjmp (evalbuf, 1);
+
+      if (interactive_shell)
+	{
+	  expr_unwind ();
+	  top_level_cleanup ();
+	  jump_to_top_level (DISCARD);
+	}
+      else
+	jump_to_top_level (FORCE_EOF);
+    }
+
+#if defined (ARRAY_VARS)
+  ind = -1;
+  /* If the second argument to get_array_value doesn't include AV_ALLOWALL,
+     we don't allow references like array[@].  In this case, get_array_value
+     is just like get_variable_value in that it does not return newly-allocated
+     memory or quote the results.  AFLAG is set above and is either AV_NOEXPAND
+     or 0. */
+  value = (e == ']') ? get_array_value (tok, aflag, (int *)NULL, &ind) : get_variable_value (v);
+#else
+  value = get_variable_value (v);
+#endif
+
+  if (expr_depth < initial_depth)
+    {
+      if (no_longjmp_on_fatal_error && interactive_shell)
+	sh_longjmp (evalbuf, 1);
+      return (0);
+    }
+
+  tval = (value && *value) ? subexpr (value) : 0;
+
+  if (lvalue)
+    {
+      lvalue->tokstr = tok;	/* XXX */
+      lvalue->tokval = tval;
+      lvalue->tokvar = v;	/* XXX */
+#if defined (ARRAY_VARS)
+      lvalue->ind = ind;
+#else
+      lvalue->ind = -1;
+#endif
+    }
+	  
+  return (tval);
+}
+
+static int
+_is_multiop (c)
+     int c;
+{
+  switch (c)
+    {
+    case EQEQ:
+    case NEQ:
+    case LEQ:
+    case GEQ:
+    case LAND:
+    case LOR:
+    case LSH:
+    case RSH:
+    case OP_ASSIGN:
+    case COND:
+    case POWER:
+    case PREINC:
+    case PREDEC:
+    case POSTINC:
+    case POSTDEC:
+      return 1;
+    default:
+      return 0;
+    }
+}
+
+static int
+_is_arithop (c)
+     int c;
+{
+  switch (c)
+    {
+    case EQ:
+    case GT:
+    case LT:
+    case PLUS:
+    case MINUS:
+    case MUL:
+    case DIV:
+    case MOD:
+    case NOT:
+    case LPAR:
+    case RPAR:
+    case BAND:
+    case BOR:
+    case BXOR:
+    case BNOT:
+      return 1;		/* operator tokens */
+    case QUES:
+    case COL:
+    case COMMA:
+      return 1;		/* questionable */
+    default:
+      return 0;		/* anything else is invalid */
+    }
+}
+
+/* Lexical analyzer/token reader for the expression evaluator.  Reads the
+   next token and puts its value into curtok, while advancing past it.
+   Updates value of tp.  May also set tokval (for number) or tokstr (for
+   string). */
+static void
+readtok ()
+{
+  register char *cp, *xp;
+  register unsigned char c, c1;
+  register int e;
+  struct lvalue lval;
+
+  /* Skip leading whitespace. */
+  cp = tp;
+  c = e = 0;
+  while (cp && (c = *cp) && (cr_whitespace (c)))
+    cp++;
+
+  if (c)
+    cp++;
+
+  if (c == '\0')
+    {
+      lasttok = curtok;
+      curtok = 0;
+      tp = cp;
+      return;
+    }
+  lasttp = tp = cp - 1;
+
+  if (legal_variable_starter (c))
+    {
+      /* variable names not preceded with a dollar sign are shell variables. */
+      char *savecp;
+      EXPR_CONTEXT ec;
+      int peektok;
+
+      while (legal_variable_char (c))
+	c = *cp++;
+
+      c = *--cp;
+
+#if defined (ARRAY_VARS)
+      if (c == '[')
+	{
+	  e = expr_skipsubscript (tp, cp);		/* XXX - was skipsubscript */
+	  if (cp[e] == ']')
+	    {
+	      cp += e + 1;
+	      c = *cp;
+	      e = ']';
+	    }
+	  else
+	    evalerror (bash_badsub_errmsg);
+	}
+#endif /* ARRAY_VARS */
+
+      *cp = '\0';
+      /* XXX - watch out for pointer aliasing issues here */
+      if (curlval.tokstr && curlval.tokstr == tokstr)
+	init_lvalue (&curlval);
+
+      FREE (tokstr);
+      tokstr = savestring (tp);
+      *cp = c;
+
+      /* XXX - make peektok part of saved token state? */
+      SAVETOK (&ec);
+      tokstr = (char *)NULL;	/* keep it from being freed */
+      tp = savecp = cp;
+      noeval = 1;
+      curtok = STR;
+      readtok ();
+      peektok = curtok;
+      if (peektok == STR)	/* free new tokstr before old one is restored */
+	FREE (tokstr);
+      RESTORETOK (&ec);
+      cp = savecp;
+
+      /* The tests for PREINC and PREDEC aren't strictly correct, but they
+	 preserve old behavior if a construct like --x=9 is given. */
+      if (lasttok == PREINC || lasttok == PREDEC || peektok != EQ)
+        {
+          lastlval = curlval;
+	  tokval = expr_streval (tokstr, e, &curlval);
+        }
+      else
+	tokval = 0;
+
+      lasttok = curtok;
+      curtok = STR;
+    }
+  else if (DIGIT(c))
+    {
+      while (ISALNUM (c) || c == '#' || c == '@' || c == '_')
+	c = *cp++;
+
+      c = *--cp;
+      *cp = '\0';
+
+      tokval = strlong (tp);
+      *cp = c;
+      lasttok = curtok;
+      curtok = NUM;
+    }
+  else
+    {
+      c1 = *cp++;
+      if ((c == EQ) && (c1 == EQ))
+	c = EQEQ;
+      else if ((c == NOT) && (c1 == EQ))
+	c = NEQ;
+      else if ((c == GT) && (c1 == EQ))
+	c = GEQ;
+      else if ((c == LT) && (c1 == EQ))
+	c = LEQ;
+      else if ((c == LT) && (c1 == LT))
+	{
+	  if (*cp == '=')	/* a <<= b */
+	    {
+	      assigntok = LSH;
+	      c = OP_ASSIGN;
+	      cp++;
+	    }
+	  else
+	    c = LSH;
+	}
+      else if ((c == GT) && (c1 == GT))
+	{
+	  if (*cp == '=')
+	    {
+	      assigntok = RSH;	/* a >>= b */
+	      c = OP_ASSIGN;
+	      cp++;
+	    }
+	  else
+	    c = RSH;
+	}
+      else if ((c == BAND) && (c1 == BAND))
+	c = LAND;
+      else if ((c == BOR) && (c1 == BOR))
+	c = LOR;
+      else if ((c == '*') && (c1 == '*'))
+	c = POWER;
+      else if ((c == '-' || c == '+') && c1 == c && curtok == STR)
+	c = (c == '-') ? POSTDEC : POSTINC;
+      else if ((c == '-' || c == '+') && c1 == c && curtok == NUM && (lasttok == PREINC || lasttok == PREDEC))
+	{
+	  /* This catches something like --FOO++ */
+	  if (c == '-')
+	    evalerror ("--: assignment requires lvalue");
+	  else
+	    evalerror ("++: assignment requires lvalue");
+	}
+      else if ((c == '-' || c == '+') && c1 == c)
+	{
+	  /* Quickly scan forward to see if this is followed by optional
+	     whitespace and an identifier. */
+	  xp = cp;
+	  while (xp && *xp && cr_whitespace (*xp))
+	    xp++;
+	  if (legal_variable_starter ((unsigned char)*xp))
+	    c = (c == '-') ? PREDEC : PREINC;
+	  else
+	    /* Could force parsing as preinc or predec and throw an error */
+#if 0
+	    {
+	      /* Posix says unary plus and minus have higher priority than
+		 preinc and predec. */
+	      /* This catches something like --4++ */
+	      if (c == '-')
+		evalerror ("--: assignment requires lvalue");
+	      else
+		evalerror ("++: assignment requires lvalue");
+	    }
+#else
+	    cp--;	/* not preinc or predec, so unget the character */
+#endif
+	}
+      else if (c1 == EQ && member (c, "*/%+-&^|"))
+	{
+	  assigntok = c;	/* a OP= b */
+	  c = OP_ASSIGN;
+	}
+      else if (_is_arithop (c) == 0)
+	{
+	  cp--;
+	  /* use curtok, since it hasn't been copied to lasttok yet */
+	  if (curtok == 0 || _is_arithop (curtok) || _is_multiop (curtok))
+	    evalerror (_("syntax error: operand expected"));
+	  else
+	    evalerror (_("syntax error: invalid arithmetic operator"));
+	}
+      else
+	cp--;			/* `unget' the character */
+
+      /* Should check here to make sure that the current character is one
+	 of the recognized operators and flag an error if not.  Could create
+	 a character map the first time through and check it on subsequent
+	 calls. */
+      lasttok = curtok;
+      curtok = c;
+    }
+  tp = cp;
+}
+
+static void
+evalerror (msg)
+     const char *msg;
+{
+  char *name, *t;
+
+  name = this_command_name;
+  for (t = expression; t && whitespace (*t); t++)
+    ;
+  internal_error (_("%s%s%s: %s (error token is \"%s\")"),
+		   name ? name : "", name ? ": " : "",
+		   t ? t : "", msg, (lasttp && *lasttp) ? lasttp : "");
+  sh_longjmp (evalbuf, 1);
+}
+
+/* Convert a string to an intmax_t integer, with an arbitrary base.
+   0nnn -> base 8
+   0[Xx]nn -> base 16
+   Anything else: [base#]number (this is implemented to match ksh93)
+
+   Base may be >=2 and <=64.  If base is <= 36, the numbers are drawn
+   from [0-9][a-zA-Z], and lowercase and uppercase letters may be used
+   interchangeably.  If base is > 36 and <= 64, the numbers are drawn
+   from [0-9][a-z][A-Z]_@ (a = 10, z = 35, A = 36, Z = 61, @ = 62, _ = 63 --
+   you get the picture). */
+
+#define VALID_NUMCHAR(c)	(ISALNUM(c) || ((c) == '_') || ((c) == '@'))
+
+static intmax_t
+strlong (num)
+     char *num;
+{
+  register char *s;
+  register unsigned char c;
+  int base, foundbase;
+  intmax_t val;
+
+  s = num;
+
+  base = 10;
+  foundbase = 0;
+  if (*s == '0')
+    {
+      s++;
+
+      if (*s == '\0')
+	return 0;
+
+       /* Base 16? */
+      if (*s == 'x' || *s == 'X')
+	{
+	  base = 16;
+	  s++;
+	}
+      else
+	base = 8;
+      foundbase++;
+    }
+
+  val = 0;
+  for (c = *s++; c; c = *s++)
+    {
+      if (c == '#')
+	{
+	  if (foundbase)
+	    evalerror (_("invalid number"));
+
+	  /* Illegal base specifications raise an evaluation error. */
+	  if (val < 2 || val > 64)
+	    evalerror (_("invalid arithmetic base"));
+
+	  base = val;
+	  val = 0;
+	  foundbase++;
+
+	  /* Make sure a base# is followed by a character that can compose a
+	     valid integer constant. Jeremy Townshend <jeremy.townshend@gmail.com> */
+	  if (VALID_NUMCHAR (*s) == 0)
+	    evalerror (_("invalid integer constant"));
+	}
+      else if (VALID_NUMCHAR (c))
+	{
+	  if (DIGIT(c))
+	    c = TODIGIT(c);
+	  else if (c >= 'a' && c <= 'z')
+	    c -= 'a' - 10;
+	  else if (c >= 'A' && c <= 'Z')
+	    c -= 'A' - ((base <= 36) ? 10 : 36);
+	  else if (c == '@')
+	    c = 62;
+	  else if (c == '_')
+	    c = 63;
+
+	  if (c >= base)
+	    evalerror (_("value too great for base"));
+
+	  val = (val * base) + c;
+	}
+      else
+	break;
+    }
+
+  return (val);
+}
+
+#if defined (EXPR_TEST)
+void *
+xmalloc (n)
+     int n;
+{
+  return (malloc (n));
+}
+
+void *
+xrealloc (s, n)
+     char *s;
+     int n;
+{
+  return (realloc (s, n));
+}
+
+SHELL_VAR *find_variable () { return 0;}
+SHELL_VAR *bind_variable () { return 0; }
+
+char *get_string_value () { return 0; }
+
+procenv_t top_level;
+
+main (argc, argv)
+     int argc;
+     char **argv;
+{
+  register int i;
+  intmax_t v;
+  int expok;
+
+  if (setjmp (top_level))
+    exit (0);
+
+  for (i = 1; i < argc; i++)
+    {
+      v = evalexp (argv[i], 0, &expok);
+      if (expok == 0)
+	fprintf (stderr, _("%s: expression error\n"), argv[i]);
+      else
+	printf ("'%s' -> %ld\n", argv[i], v);
+    }
+  exit (0);
+}
+
+int
+builtin_error (format, arg1, arg2, arg3, arg4, arg5)
+     char *format;
+{
+  fprintf (stderr, "expr: ");
+  fprintf (stderr, format, arg1, arg2, arg3, arg4, arg5);
+  fprintf (stderr, "\n");
+  return 0;
+}
+
+char *
+itos (n)
+     intmax_t n;
+{
+  return ("42");
+}
+
+#endif /* EXPR_TEST */
diff --git a/externs.h b/externs.h
new file mode 100644
index 0000000..3d7716c
--- /dev/null
+++ b/externs.h
@@ -0,0 +1,548 @@
+/* externs.h -- extern function declarations which do not appear in their
+   own header file. */
+
+/* Copyright (C) 1993-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* Make sure that this is included *after* config.h! */
+
+#if !defined (_EXTERNS_H_)
+#  define _EXTERNS_H_
+
+#include "stdc.h"
+
+/* Functions from expr.c. */
+#define EXP_EXPANDED	0x01
+
+extern intmax_t evalexp PARAMS((char *, int, int *));
+
+/* Functions from print_cmd.c. */
+#define FUNC_MULTILINE	0x01
+#define FUNC_EXTERNAL	0x02
+
+extern char *make_command_string PARAMS((COMMAND *));
+extern char *named_function_string PARAMS((char *, COMMAND *, int));
+
+extern void print_command PARAMS((COMMAND *));
+extern void print_simple_command PARAMS((SIMPLE_COM *));
+extern void print_word_list PARAMS((WORD_LIST *, char *));
+
+/* debugger support */
+extern void print_for_command_head PARAMS((FOR_COM *));
+#if defined (SELECT_COMMAND)
+extern void print_select_command_head PARAMS((SELECT_COM *));
+#endif
+extern void print_case_command_head PARAMS((CASE_COM *));
+#if defined (DPAREN_ARITHMETIC)
+extern void print_arith_command PARAMS((WORD_LIST *));
+#endif
+#if defined (COND_COMMAND)
+extern void print_cond_command PARAMS((COND_COM *));
+#endif
+
+/* set -x support */
+extern void xtrace_init PARAMS((void));
+#ifdef NEED_XTRACE_SET_DECL
+extern void xtrace_set PARAMS((int, FILE *));
+#endif
+extern void xtrace_fdchk PARAMS((int));
+extern void xtrace_reset PARAMS((void));
+extern char *indirection_level_string PARAMS((void));
+extern void xtrace_print_assignment PARAMS((char *, char *, int, int));
+extern void xtrace_print_word_list PARAMS((WORD_LIST *, int));
+extern void xtrace_print_for_command_head PARAMS((FOR_COM *));
+#if defined (SELECT_COMMAND)
+extern void xtrace_print_select_command_head PARAMS((SELECT_COM *));
+#endif
+extern void xtrace_print_case_command_head PARAMS((CASE_COM *));
+#if defined (DPAREN_ARITHMETIC)
+extern void xtrace_print_arith_cmd PARAMS((WORD_LIST *));
+#endif
+#if defined (COND_COMMAND)
+extern void xtrace_print_cond_term PARAMS((int, int, WORD_DESC *, char *, char *));
+#endif
+
+/* Functions from shell.c. */
+extern void exit_shell PARAMS((int)) __attribute__((__noreturn__));
+extern void sh_exit PARAMS((int)) __attribute__((__noreturn__));
+extern void subshell_exit PARAMS((int)) __attribute__((__noreturn__));
+extern void set_exit_status PARAMS((int));
+extern void disable_priv_mode PARAMS((void));
+extern void unbind_args PARAMS((void));
+
+#if defined (RESTRICTED_SHELL)
+extern int shell_is_restricted PARAMS((char *));
+extern int maybe_make_restricted PARAMS((char *));
+#endif
+
+extern void unset_bash_input PARAMS((int));
+extern void get_current_user_info PARAMS((void));
+
+/* Functions from eval.c. */
+extern int reader_loop PARAMS((void));
+extern int pretty_print_loop PARAMS((void));
+extern int parse_command PARAMS((void));
+extern int read_command PARAMS((void));
+
+/* Functions from braces.c. */
+#if defined (BRACE_EXPANSION)
+extern char **brace_expand PARAMS((char *));
+#endif
+
+/* Miscellaneous functions from parse.y */
+extern int yyparse PARAMS((void));
+extern int return_EOF PARAMS((void));
+extern void push_token PARAMS((int));
+extern char *xparse_dolparen PARAMS((char *, char *, int *, int));
+extern void reset_parser PARAMS((void));
+extern void reset_readahead_token PARAMS((void));
+extern WORD_LIST *parse_string_to_word_list PARAMS((char *, int, const char *));
+
+extern int parser_will_prompt PARAMS((void));
+extern int parser_in_command_position PARAMS((void));
+
+extern void free_pushed_string_input PARAMS((void));
+
+extern int parser_expanding_alias PARAMS((void));
+extern void parser_save_alias PARAMS((void));
+extern void parser_restore_alias PARAMS((void));
+
+extern void clear_shell_input_line PARAMS((void));
+
+extern char *decode_prompt_string PARAMS((char *));
+
+extern int get_current_prompt_level PARAMS((void));
+extern void set_current_prompt_level PARAMS((int));
+
+#if defined (HISTORY)
+extern char *history_delimiting_chars PARAMS((const char *));
+#endif
+
+/* Declarations for functions defined in locale.c */
+extern void set_default_locale PARAMS((void));
+extern void set_default_locale_vars PARAMS((void));
+extern int set_locale_var PARAMS((char *, char *));
+extern int set_lang PARAMS((char *, char *));
+extern void set_default_lang PARAMS((void));
+extern char *get_locale_var PARAMS((char *));
+extern char *localetrans PARAMS((char *, int, int *));
+extern char *mk_msgstr PARAMS((char *, int *));
+extern char *localeexpand PARAMS((char *, int, int, int, int *));
+#ifndef locale_decpoint
+extern int locale_decpoint PARAMS((void));
+#endif
+
+/* Declarations for functions defined in list.c. */
+extern void list_walk PARAMS((GENERIC_LIST *, sh_glist_func_t *));
+extern void wlist_walk PARAMS((WORD_LIST *, sh_icpfunc_t *));
+extern GENERIC_LIST *list_reverse ();
+extern int list_length ();
+extern GENERIC_LIST *list_append ();
+extern GENERIC_LIST *list_remove ();
+
+/* Declarations for functions defined in stringlib.c */
+extern int find_string_in_alist PARAMS((char *, STRING_INT_ALIST *, int));
+extern char *find_token_in_alist PARAMS((int, STRING_INT_ALIST *, int));
+extern int find_index_in_alist PARAMS((char *, STRING_INT_ALIST *, int));
+
+extern char *substring PARAMS((const char *, int, int));
+extern char *strsub PARAMS((char *, char *, char *, int));
+extern char *strcreplace PARAMS((char *, int, const char *, int));
+extern void strip_leading PARAMS((char *));
+extern void strip_trailing PARAMS((char *, int, int));
+extern void xbcopy PARAMS((char *, char *, int));
+
+/* Functions from version.c. */
+extern char *shell_version_string PARAMS((void));
+extern void show_shell_version PARAMS((int));
+
+/* Functions from the bash library, lib/sh/libsh.a.  These should really
+   go into a separate include file. */
+
+/* declarations for functions defined in lib/sh/casemod.c */
+extern char *sh_modcase PARAMS((const char *, char *, int));
+
+/* Defines for flags argument to sh_modcase.  These need to agree with what's
+   in lib/sh/casemode.c */
+#define CASE_LOWER	0x0001
+#define CASE_UPPER	0x0002
+#define CASE_CAPITALIZE	0x0004
+#define CASE_UNCAP	0x0008
+#define CASE_TOGGLE	0x0010
+#define CASE_TOGGLEALL	0x0020
+#define CASE_UPFIRST	0x0040
+#define CASE_LOWFIRST	0x0080
+
+#define CASE_USEWORDS	0x1000
+
+/* declarations for functions defined in lib/sh/clktck.c */
+extern long get_clk_tck PARAMS((void));
+
+/* declarations for functions defined in lib/sh/clock.c */
+extern void clock_t_to_secs ();
+extern void print_clock_t ();
+
+/* Declarations for functions defined in lib/sh/dprintf.c */
+#if !defined (HAVE_DPRINTF)
+extern void dprintf PARAMS((int, const char *, ...))  __attribute__((__format__ (printf, 2, 3)));
+#endif
+
+/* Declarations for functions defined in lib/sh/fmtulong.c */
+#define FL_PREFIX     0x01    /* add 0x, 0X, or 0 prefix as appropriate */
+#define FL_ADDBASE    0x02    /* add base# prefix to converted value */
+#define FL_HEXUPPER   0x04    /* use uppercase when converting to hex */
+#define FL_UNSIGNED   0x08    /* don't add any sign */
+
+extern char *fmtulong PARAMS((unsigned long int, int, char *, size_t, int));
+
+/* Declarations for functions defined in lib/sh/fmtulong.c */
+#if defined (HAVE_LONG_LONG)
+extern char *fmtullong PARAMS((unsigned long long int, int, char *, size_t, int));
+#endif
+
+/* Declarations for functions defined in lib/sh/fmtumax.c */
+extern char *fmtumax PARAMS((uintmax_t, int, char *, size_t, int));
+
+/* Declarations for functions defined in lib/sh/fnxform.c */
+extern char *fnx_fromfs PARAMS((char *, size_t));
+extern char *fnx_tofs PARAMS((char *, size_t));
+
+/* Declarations for functions defined in lib/sh/fpurge.c */
+
+#if defined NEED_FPURGE_DECL
+#if !HAVE_DECL_FPURGE
+
+#if HAVE_FPURGE
+#  define fpurge _bash_fpurge
+#endif
+extern int fpurge PARAMS((FILE *stream));
+
+#endif /* HAVE_DECL_FPURGE */
+#endif /* NEED_FPURGE_DECL */
+
+/* Declarations for functions defined in lib/sh/getcwd.c */
+#if !defined (HAVE_GETCWD)
+extern char *getcwd PARAMS((char *, size_t));
+#endif
+
+/* Declarations for functions defined in lib/sh/input_avail.c */
+extern int input_avail PARAMS((int));
+
+/* Declarations for functions defined in lib/sh/itos.c */
+extern char *inttostr PARAMS((intmax_t, char *, size_t));
+extern char *itos PARAMS((intmax_t));
+extern char *mitos PARAMS((intmax_t));
+extern char *uinttostr PARAMS((uintmax_t, char *, size_t));
+extern char *uitos PARAMS((uintmax_t));
+
+/* declarations for functions defined in lib/sh/makepath.c */
+#define MP_DOTILDE	0x01
+#define MP_DOCWD	0x02
+#define MP_RMDOT	0x04
+#define MP_IGNDOT	0x08
+
+extern char *sh_makepath PARAMS((const char *, const char *, int));
+
+/* declarations for functions defined in lib/sh/mbscasecmp.c */
+#if !defined (HAVE_MBSCASECMP)
+extern char *mbscasecmp PARAMS((const char *, const char *));
+#endif
+
+/* declarations for functions defined in lib/sh/mbschr.c */
+#if !defined (HAVE_MBSCHR)
+extern char *mbschr PARAMS((const char *, int));
+#endif
+
+/* declarations for functions defined in lib/sh/mbscmp.c */
+#if !defined (HAVE_MBSCMP)
+extern char *mbscmp PARAMS((const char *, const char *));
+#endif
+
+/* declarations for functions defined in lib/sh/netconn.c */
+extern int isnetconn PARAMS((int));
+
+/* declarations for functions defined in lib/sh/netopen.c */
+extern int netopen PARAMS((char *));
+
+/* Declarations for  functions defined in lib/sh/oslib.c */
+
+#if !defined (HAVE_DUP2) || defined (DUP2_BROKEN)
+extern int dup2 PARAMS((int, int));
+#endif
+
+#if !defined (HAVE_GETDTABLESIZE)
+extern int getdtablesize PARAMS((void));
+#endif /* !HAVE_GETDTABLESIZE */
+
+#if !defined (HAVE_GETHOSTNAME)
+extern int gethostname PARAMS((char *, int));
+#endif /* !HAVE_GETHOSTNAME */
+
+extern int getmaxgroups PARAMS((void));
+extern long getmaxchild PARAMS((void));
+
+/* declarations for functions defined in lib/sh/pathcanon.c */
+#define PATH_CHECKDOTDOT	0x0001
+#define PATH_CHECKEXISTS	0x0002
+#define PATH_HARDPATH		0x0004
+#define PATH_NOALLOC		0x0008
+
+extern char *sh_canonpath PARAMS((char *, int));
+
+/* declarations for functions defined in lib/sh/pathphys.c */
+extern char *sh_physpath PARAMS((char *, int));
+extern char *sh_realpath PARAMS((const char *, char *));
+
+/* declarations for functions defined in lib/sh/random.c */
+extern int brand PARAMS((void));
+extern void sbrand PARAMS((unsigned long));		/* set bash random number generator. */
+extern void seedrand PARAMS((void));			/* seed generator randomly */
+extern void seedrand32 PARAMS((void));
+extern u_bits32_t get_urandom32 PARAMS((void));
+
+/* declarations for functions defined in lib/sh/setlinebuf.c */
+#ifdef NEED_SH_SETLINEBUF_DECL
+extern int sh_setlinebuf PARAMS((FILE *));
+#endif
+
+/* declarations for functions defined in lib/sh/shaccess.c */
+extern int sh_eaccess PARAMS((const char *, int));
+
+/* declarations for functions defined in lib/sh/shmatch.c */
+extern int sh_regmatch PARAMS((const char *, const char *, int));
+
+/* defines for flags argument to sh_regmatch. */
+#define SHMAT_SUBEXP		0x001	/* save subexpressions in SH_REMATCH */
+#define SHMAT_PWARN		0x002	/* print a warning message on invalid regexp */
+
+/* declarations for functions defined in lib/sh/shmbchar.c */
+extern size_t mbstrlen PARAMS((const char *));
+extern char *mbsmbchar PARAMS((const char *));
+extern int sh_mbsnlen PARAMS((const char *, size_t, int));
+
+/* declarations for functions defined in lib/sh/shquote.c */
+extern char *sh_single_quote PARAMS((const char *));
+extern char *sh_double_quote PARAMS((const char *));
+extern char *sh_mkdoublequoted PARAMS((const char *, int, int));
+extern char *sh_un_double_quote PARAMS((char *));
+extern char *sh_backslash_quote PARAMS((char *, const char *, int));
+extern char *sh_backslash_quote_for_double_quotes PARAMS((char *));
+extern char *sh_quote_reusable PARAMS((char *, int));
+extern int sh_contains_shell_metas PARAMS((const char *));
+extern int sh_contains_quotes PARAMS((const char *));
+
+/* declarations for functions defined in lib/sh/spell.c */
+extern int spname PARAMS((char *, char *));
+extern char *dirspell PARAMS((char *));
+
+/* declarations for functions defined in lib/sh/strcasecmp.c */
+#if !defined (HAVE_STRCASECMP)
+extern int strncasecmp PARAMS((const char *, const char *, size_t));
+extern int strcasecmp PARAMS((const char *, const char *));
+#endif /* HAVE_STRCASECMP */
+
+/* declarations for functions defined in lib/sh/strcasestr.c */
+#if ! HAVE_STRCASESTR
+extern char *strcasestr PARAMS((const char *, const char *));
+#endif
+
+/* declarations for functions defined in lib/sh/strchrnul.c */
+#if ! HAVE_STRCHRNUL
+extern char *strchrnul PARAMS((const char *, int));
+#endif
+
+/* declarations for functions defined in lib/sh/strerror.c */
+#if !defined (HAVE_STRERROR) && !defined (strerror)
+extern char *strerror PARAMS((int));
+#endif
+
+/* declarations for functions defined in lib/sh/strftime.c */
+#if !defined (HAVE_STRFTIME) && defined (NEED_STRFTIME_DECL)
+extern size_t strftime PARAMS((char *, size_t, const char *, const struct tm *));
+#endif
+
+/* declarations for functions and structures defined in lib/sh/stringlist.c */
+
+/* This is a general-purpose argv-style array struct. */
+typedef struct _list_of_strings {
+  char **list;
+  int list_size;
+  int list_len;
+} STRINGLIST;
+
+typedef int sh_strlist_map_func_t PARAMS((char *));
+
+extern STRINGLIST *strlist_create PARAMS((int));
+extern STRINGLIST *strlist_resize PARAMS((STRINGLIST *, int));
+extern void strlist_flush PARAMS((STRINGLIST *));
+extern void strlist_dispose PARAMS((STRINGLIST *));
+extern int strlist_remove PARAMS((STRINGLIST *, char *));
+extern STRINGLIST *strlist_copy PARAMS((STRINGLIST *));
+extern STRINGLIST *strlist_merge PARAMS((STRINGLIST *, STRINGLIST *));
+extern STRINGLIST *strlist_append PARAMS((STRINGLIST *, STRINGLIST *));
+extern STRINGLIST *strlist_prefix_suffix PARAMS((STRINGLIST *, char *, char *));
+extern void strlist_print PARAMS((STRINGLIST *, char *));
+extern void strlist_walk PARAMS((STRINGLIST *, sh_strlist_map_func_t *));
+extern void strlist_sort PARAMS((STRINGLIST *));
+
+/* declarations for functions defined in lib/sh/stringvec.c */
+
+extern char **strvec_create PARAMS((int));
+extern char **strvec_resize PARAMS((char **, int));
+extern char **strvec_mcreate PARAMS((int));
+extern char **strvec_mresize PARAMS((char **, int));
+extern void strvec_flush PARAMS((char **));
+extern void strvec_dispose PARAMS((char **));
+extern int strvec_remove PARAMS((char **, char *));
+extern int strvec_len PARAMS((char **));
+extern int strvec_search PARAMS((char **, char *));
+extern char **strvec_copy PARAMS((char **));
+extern int strvec_posixcmp PARAMS((char **, char **));
+extern int strvec_strcmp PARAMS((char **, char **));
+extern void strvec_sort PARAMS((char **, int));
+
+extern char **strvec_from_word_list PARAMS((WORD_LIST *, int, int, int *));
+extern WORD_LIST *strvec_to_word_list PARAMS((char **, int, int));
+
+/* declarations for functions defined in lib/sh/strnlen.c */
+#if !defined (HAVE_STRNLEN)
+extern size_t strnlen PARAMS((const char *, size_t));
+#endif
+
+/* declarations for functions defined in lib/sh/strpbrk.c */
+#if !defined (HAVE_STRPBRK)
+extern char *strpbrk PARAMS((const char *, const char *));
+#endif
+
+/* declarations for functions defined in lib/sh/strtod.c */
+#if !defined (HAVE_STRTOD)
+extern double strtod PARAMS((const char *, char **));
+#endif
+
+/* declarations for functions defined in lib/sh/strtol.c */
+#if !HAVE_DECL_STRTOL
+extern long strtol PARAMS((const char *, char **, int));
+#endif
+
+/* declarations for functions defined in lib/sh/strtoll.c */
+#if defined (HAVE_LONG_LONG) && !HAVE_DECL_STRTOLL
+extern long long strtoll PARAMS((const char *, char **, int));
+#endif
+
+/* declarations for functions defined in lib/sh/strtoul.c */
+#if !HAVE_DECL_STRTOUL
+extern unsigned long strtoul PARAMS((const char *, char **, int));
+#endif
+
+/* declarations for functions defined in lib/sh/strtoull.c */
+#if defined (HAVE_LONG_LONG) && !HAVE_DECL_STRTOULL
+extern unsigned long long strtoull PARAMS((const char *, char **, int));
+#endif
+
+/* declarations for functions defined in lib/sh/strimax.c */
+#if !HAVE_DECL_STRTOIMAX
+extern intmax_t strtoimax PARAMS((const char *, char **, int));
+#endif
+
+/* declarations for functions defined in lib/sh/strumax.c */
+#if !HAVE_DECL_STRTOUMAX
+extern uintmax_t strtoumax PARAMS((const char *, char **, int));
+#endif
+
+/* declarations for functions defined in lib/sh/strtrans.c */
+extern char *ansicstr PARAMS((char *, int, int, int *, int *));
+extern char *ansic_quote PARAMS((char *, int, int *));
+extern int ansic_shouldquote PARAMS((const char *));
+extern char *ansiexpand PARAMS((char *, int, int, int *));
+
+/* declarations for functions defined in lib/sh/timeval.c.  No prototypes
+   so we don't have to count on having a definition of struct timeval in
+   scope when this file is included. */
+extern void timeval_to_secs ();
+extern void print_timeval ();
+
+/* declarations for functions defined in lib/sh/tmpfile.c */
+#define MT_USETMPDIR		0x0001
+#define MT_READWRITE		0x0002
+#define MT_USERANDOM		0x0004
+#define MT_TEMPLATE		0x0008
+
+extern char *sh_mktmpname PARAMS((char *, int));
+extern int sh_mktmpfd PARAMS((char *, int, char **));
+/* extern FILE *sh_mktmpfp PARAMS((char *, int, char **)); */
+extern char *sh_mktmpdir PARAMS((char *, int));
+
+/* declarations for functions defined in lib/sh/uconvert.c */
+extern int uconvert PARAMS((char *, long *, long *, char **));
+
+/* declarations for functions defined in lib/sh/ufuncs.c */
+extern unsigned int falarm PARAMS((unsigned int, unsigned int));
+extern unsigned int fsleep PARAMS((unsigned int, unsigned int));
+
+/* declarations for functions defined in lib/sh/unicode.c */
+extern int u32cconv PARAMS((unsigned long, char *));
+extern void u32reset PARAMS((void));
+
+/* declarations for functions defined in lib/sh/utf8.c */
+extern char *utf8_mbschr PARAMS((const char *, int));
+extern int utf8_mbscmp PARAMS((const char *, const char *));
+extern char *utf8_mbsmbchar PARAMS((const char *));
+extern int utf8_mbsnlen PARAMS((const char *, size_t, int));
+extern int utf8_mblen PARAMS((const char *, size_t));
+extern size_t utf8_mbstrlen PARAMS((const char *));
+
+/* declarations for functions defined in lib/sh/wcsnwidth.c */
+#if defined (HANDLE_MULTIBYTE)
+extern int wcsnwidth PARAMS((const wchar_t *, size_t, int));
+#endif
+
+/* declarations for functions defined in lib/sh/winsize.c */
+extern void get_new_window_size PARAMS((int, int *, int *));
+
+/* declarations for functions defined in lib/sh/zcatfd.c */
+extern int zcatfd PARAMS((int, int, char *));
+
+/* declarations for functions defined in lib/sh/zgetline.c */
+extern ssize_t zgetline PARAMS((int, char **, size_t *, int, int));
+
+/* declarations for functions defined in lib/sh/zmapfd.c */
+extern int zmapfd PARAMS((int, char **, char *));
+
+/* declarations for functions defined in lib/sh/zread.c */
+extern ssize_t zread PARAMS((int, char *, size_t));
+extern ssize_t zreadretry PARAMS((int, char *, size_t));
+extern ssize_t zreadintr PARAMS((int, char *, size_t));
+extern ssize_t zreadc PARAMS((int, char *));
+extern ssize_t zreadcintr PARAMS((int, char *));
+extern ssize_t zreadn PARAMS((int, char *, size_t));
+extern void zreset PARAMS((void));
+extern void zsyncfd PARAMS((int));
+
+/* declarations for functions defined in lib/sh/zwrite.c */
+extern int zwrite PARAMS((int, char *, size_t));
+
+/* declarations for functions defined in lib/glob/gmisc.c */
+extern int match_pattern_char PARAMS((char *, char *, int));
+extern int umatchlen PARAMS((char *, size_t));
+
+#if defined (HANDLE_MULTIBYTE)
+extern int match_pattern_wchar PARAMS((wchar_t *, wchar_t *, int));
+extern int wmatchlen PARAMS((wchar_t *, size_t));
+#endif
+
+#endif /* _EXTERNS_H_ */
diff --git a/findcmd.c b/findcmd.c
new file mode 100644
index 0000000..e235705
--- /dev/null
+++ b/findcmd.c
@@ -0,0 +1,688 @@
+/* findcmd.c -- Functions to search for commands by name. */
+
+/* Copyright (C) 1997-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include <stdio.h>
+#include "chartypes.h"
+#include "bashtypes.h"
+#if !defined (_MINIX) && defined (HAVE_SYS_FILE_H)
+#  include <sys/file.h>
+#endif
+#include "filecntl.h"
+#include "posixstat.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+#include <errno.h>
+
+#include "bashansi.h"
+
+#include "memalloc.h"
+#include "shell.h"
+#include "execute_cmd.h"
+#include "flags.h"
+#include "hashlib.h"
+#include "pathexp.h"
+#include "hashcmd.h"
+#include "findcmd.h"	/* matching prototypes and declarations */
+
+#include <glob/strmatch.h>
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+/* Static functions defined and used in this file. */
+static char *_find_user_command_internal PARAMS((const char *, int));
+static char *find_user_command_internal PARAMS((const char *, int));
+static char *find_user_command_in_path PARAMS((const char *, char *, int));
+static char *find_in_path_element PARAMS((const char *, char *, int, int, struct stat *));
+static char *find_absolute_program PARAMS((const char *, int));
+
+static char *get_next_path_element PARAMS((char *, int *));
+
+/* The file name which we would try to execute, except that it isn't
+   possible to execute it.  This is the first file that matches the
+   name that we are looking for while we are searching $PATH for a
+   suitable one to execute.  If we cannot find a suitable executable
+   file, then we use this one. */
+static char *file_to_lose_on;
+
+/* Non-zero if we should stat every command found in the hash table to
+   make sure it still exists. */
+int check_hashed_filenames = CHECKHASH_DEFAULT;
+
+/* DOT_FOUND_IN_SEARCH becomes non-zero when find_user_command ()
+   encounters a `.' as the directory pathname while scanning the
+   list of possible pathnames; i.e., if `.' comes before the directory
+   containing the file of interest. */
+int dot_found_in_search = 0;
+
+/* Set up EXECIGNORE; a blacklist of patterns that executable files should not
+   match. */
+static struct ignorevar execignore =
+{
+  "EXECIGNORE",
+  NULL,
+  0,
+  NULL,
+  NULL
+};
+
+void
+setup_exec_ignore (varname)
+     char *varname;
+{
+  setup_ignore_patterns (&execignore);
+}
+
+static int
+exec_name_should_ignore (name)
+     const char *name;
+{
+  struct ign *p;
+
+  for (p = execignore.ignores; p && p->val; p++)
+    if (strmatch (p->val, (char *)name, FNMATCH_EXTFLAG|FNM_CASEFOLD) != FNM_NOMATCH)
+      return 1;
+  return 0;
+}
+
+/* Return some flags based on information about this file.
+   The EXISTS bit is non-zero if the file is found.
+   The EXECABLE bit is non-zero the file is executble.
+   Zero is returned if the file is not found. */
+int
+file_status (name)
+     const char *name;
+{
+  struct stat finfo;
+  int r;
+
+  /* Determine whether this file exists or not. */
+  if (stat (name, &finfo) < 0)
+    return (0);
+
+  /* If the file is a directory, then it is not "executable" in the
+     sense of the shell. */
+  if (S_ISDIR (finfo.st_mode))
+    return (FS_EXISTS|FS_DIRECTORY);
+
+  r = FS_EXISTS;
+
+#if defined (HAVE_EACCESS)
+  /* Use eaccess(2) if we have it to take things like ACLs and other
+     file access mechanisms into account.  eaccess uses the effective
+     user and group IDs, not the real ones.  We could use sh_eaccess,
+     but we don't want any special treatment for /dev/fd. */
+  if (exec_name_should_ignore (name) == 0 && eaccess (name, X_OK) == 0)
+    r |= FS_EXECABLE;
+  if (eaccess (name, R_OK) == 0)
+    r |= FS_READABLE;
+
+  return r;
+#elif defined (AFS)
+  /* We have to use access(2) to determine access because AFS does not
+     support Unix file system semantics.  This may produce wrong
+     answers for non-AFS files when ruid != euid.  I hate AFS. */
+  if (exec_name_should_ignore (name) == 0 && access (name, X_OK) == 0)
+    r |= FS_EXECABLE;
+  if (access (name, R_OK) == 0)
+    r |= FS_READABLE;
+
+  return r;
+#else /* !HAVE_EACCESS && !AFS */
+
+  /* Find out if the file is actually executable.  By definition, the
+     only other criteria is that the file has an execute bit set that
+     we can use.  The same with whether or not a file is readable. */
+
+  /* Root only requires execute permission for any of owner, group or
+     others to be able to exec a file, and can read any file. */
+  if (current_user.euid == (uid_t)0)
+    {
+      r |= FS_READABLE;
+      if (exec_name_should_ignore (name) == 0 && (finfo.st_mode & S_IXUGO))
+	r |= FS_EXECABLE;
+      return r;
+    }
+
+  /* If we are the owner of the file, the owner bits apply. */
+  if (current_user.euid == finfo.st_uid)
+    {
+      if (exec_name_should_ignore (name) == 0 && (finfo.st_mode & S_IXUSR))
+	r |= FS_EXECABLE;
+      if (finfo.st_mode & S_IRUSR)
+	r |= FS_READABLE;
+    }
+
+  /* If we are in the owning group, the group permissions apply. */
+  else if (group_member (finfo.st_gid))
+    {
+      if (exec_name_should_ignore (name) == 0 && (finfo.st_mode & S_IXGRP))
+	r |= FS_EXECABLE;
+      if (finfo.st_mode & S_IRGRP)
+	r |= FS_READABLE;
+    }
+
+  /* Else we check whether `others' have permission to execute the file */
+  else
+    {
+      if (exec_name_should_ignore (name) == 0 && finfo.st_mode & S_IXOTH)
+	r |= FS_EXECABLE;
+      if (finfo.st_mode & S_IROTH)
+	r |= FS_READABLE;
+    }
+
+  return r;
+#endif /* !AFS */
+}
+
+/* Return non-zero if FILE exists and is executable.
+   Note that this function is the definition of what an
+   executable file is; do not change this unless YOU know
+   what an executable file is. */
+int
+executable_file (file)
+     const char *file;
+{
+  int s;
+
+  s = file_status (file);
+#if defined (EISDIR)
+  if (s & FS_DIRECTORY)
+    errno = EISDIR;	/* let's see if we can improve error messages */
+#endif
+  return ((s & FS_EXECABLE) && ((s & FS_DIRECTORY) == 0));
+}
+
+int
+is_directory (file)
+     const char *file;
+{
+  return (file_status (file) & FS_DIRECTORY);
+}
+
+int
+executable_or_directory (file)
+     const char *file;
+{
+  int s;
+
+  s = file_status (file);
+  return ((s & FS_EXECABLE) || (s & FS_DIRECTORY));
+}
+
+/* Locate the executable file referenced by NAME, searching along
+   the contents of the shell PATH variable.  Return a new string
+   which is the full pathname to the file, or NULL if the file
+   couldn't be found.  If a file is found that isn't executable,
+   and that is the only match, then return that. */
+char *
+find_user_command (name)
+     const char *name;
+{
+  return (find_user_command_internal (name, FS_EXEC_PREFERRED|FS_NODIRS));
+}
+
+/* Locate the file referenced by NAME, searching along the contents
+   of the shell PATH variable.  Return a new string which is the full
+   pathname to the file, or NULL if the file couldn't be found.  This
+   returns the first readable file found; designed to be used to look
+   for shell scripts or files to source. */
+char *
+find_path_file (name)
+     const char *name;
+{
+  return (find_user_command_internal (name, FS_READABLE));
+}
+
+static char *
+_find_user_command_internal (name, flags)
+     const char *name;
+     int flags;
+{
+  char *path_list, *cmd;
+  SHELL_VAR *var;
+
+  /* Search for the value of PATH in both the temporary environments and
+     in the regular list of variables. */
+  if (var = find_variable_tempenv ("PATH"))	/* XXX could be array? */
+    path_list = value_cell (var);
+  else
+    path_list = (char *)NULL;
+
+  if (path_list == 0 || *path_list == '\0')
+    return (savestring (name));
+
+  cmd = find_user_command_in_path (name, path_list, flags);
+
+  return (cmd);
+}
+
+static char *
+find_user_command_internal (name, flags)
+     const char *name;
+     int flags;
+{
+#ifdef __WIN32__
+  char *res, *dotexe;
+
+  dotexe = (char *)xmalloc (strlen (name) + 5);
+  strcpy (dotexe, name);
+  strcat (dotexe, ".exe");
+  res = _find_user_command_internal (dotexe, flags);
+  free (dotexe);
+  if (res == 0)
+    res = _find_user_command_internal (name, flags);
+  return res;
+#else
+  return (_find_user_command_internal (name, flags));
+#endif
+}
+
+/* Return the next element from PATH_LIST, a colon separated list of
+   paths.  PATH_INDEX_POINTER is the address of an index into PATH_LIST;
+   the index is modified by this function.
+   Return the next element of PATH_LIST or NULL if there are no more. */
+static char *
+get_next_path_element (path_list, path_index_pointer)
+     char *path_list;
+     int *path_index_pointer;
+{
+  char *path;
+
+  path = extract_colon_unit (path_list, path_index_pointer);
+
+  if (path == 0)
+    return (path);
+
+  if (*path == '\0')
+    {
+      free (path);
+      path = savestring (".");
+    }
+
+  return (path);
+}
+
+/* Look for PATHNAME in $PATH.  Returns either the hashed command
+   corresponding to PATHNAME or the first instance of PATHNAME found
+   in $PATH.  If (FLAGS&CMDSRCH_HASH) is non-zero, insert the instance of
+   PATHNAME found in $PATH into the command hash table.  If (FLAGS&CMDSRCH_STDPATH)
+   is non-zero, we are running in a `command -p' environment and should use
+   the Posix standard path.
+   Returns a newly-allocated string. */
+char *
+search_for_command (pathname, flags)
+     const char *pathname;
+     int flags;
+{
+  char *hashed_file, *command, *path_list;
+  int temp_path, st;
+  SHELL_VAR *path;
+
+  hashed_file = command = (char *)NULL;
+
+  /* If PATH is in the temporary environment for this command, don't use the
+     hash table to search for the full pathname. */
+  path = find_variable_tempenv ("PATH");
+  temp_path = path && tempvar_p (path);
+
+  /* Don't waste time trying to find hashed data for a pathname
+     that is already completely specified or if we're using a command-
+     specific value for PATH. */
+  if (temp_path == 0 && absolute_program (pathname) == 0)
+    hashed_file = phash_search (pathname);
+
+  /* If a command found in the hash table no longer exists, we need to
+     look for it in $PATH.  Thank you Posix.2.  This forces us to stat
+     every command found in the hash table. */
+
+  if (hashed_file && (posixly_correct || check_hashed_filenames))
+    {
+      st = file_status (hashed_file);
+      if ((st & (FS_EXISTS|FS_EXECABLE)) != (FS_EXISTS|FS_EXECABLE))
+	{
+	  phash_remove (pathname);
+	  free (hashed_file);
+	  hashed_file = (char *)NULL;
+	}
+    }
+
+  if (hashed_file)
+    command = hashed_file;
+  else if (absolute_program (pathname))
+    /* A command containing a slash is not looked up in PATH or saved in
+       the hash table. */
+    command = savestring (pathname);
+  else
+    {
+      if (flags & CMDSRCH_STDPATH)
+	path_list = conf_standard_path ();
+      else if (temp_path || path)
+	path_list = value_cell (path);
+      else
+	path_list = 0;
+
+      command = find_user_command_in_path (pathname, path_list, FS_EXEC_PREFERRED|FS_NODIRS);
+
+      if (command && hashing_enabled && temp_path == 0 && (flags & CMDSRCH_HASH))
+	{
+	  /* If we found the full pathname the same as the command name, the
+	     command probably doesn't exist.  Don't put it into the hash
+	     table. */
+	  if (STREQ (command, pathname))
+	    {
+	      st = file_status (command);
+	      if (st & FS_EXECABLE)
+	        phash_insert ((char *)pathname, command, dot_found_in_search, 1);
+	    }
+	  /* If we're in posix mode, don't add files without the execute bit
+	     to the hash table. */
+	  else if (posixly_correct)
+	    {
+	      st = file_status (command);
+	      if (st & FS_EXECABLE)
+	        phash_insert ((char *)pathname, command, dot_found_in_search, 1);
+	    }
+	  else
+	    phash_insert ((char *)pathname, command, dot_found_in_search, 1);
+	}
+
+      if (flags & CMDSRCH_STDPATH)
+	free (path_list);
+    }
+
+  return (command);
+}
+
+char *
+user_command_matches (name, flags, state)
+     const char *name;
+     int flags, state;
+{
+  register int i;
+  int  path_index, name_len;
+  char *path_list, *path_element, *match;
+  struct stat dotinfo;
+  static char **match_list = NULL;
+  static int match_list_size = 0;
+  static int match_index = 0;
+
+  if (state == 0)
+    {
+      /* Create the list of matches. */
+      if (match_list == 0)
+	{
+	  match_list_size = 5;
+	  match_list = strvec_create (match_list_size);
+	}
+
+      /* Clear out the old match list. */
+      for (i = 0; i < match_list_size; i++)
+	match_list[i] = 0;
+
+      /* We haven't found any files yet. */
+      match_index = 0;
+
+      if (absolute_program (name))
+	{
+	  match_list[0] = find_absolute_program (name, flags);
+	  match_list[1] = (char *)NULL;
+	  path_list = (char *)NULL;
+	}
+      else
+	{
+	  name_len = strlen (name);
+	  file_to_lose_on = (char *)NULL;
+	  dot_found_in_search = 0;
+	  if (stat (".", &dotinfo) < 0)
+	    dotinfo.st_dev = dotinfo.st_ino = 0;	/* so same_file won't match */
+	  path_list = get_string_value ("PATH");
+      	  path_index = 0;
+	}
+
+      while (path_list && path_list[path_index])
+	{
+	  path_element = get_next_path_element (path_list, &path_index);
+
+	  if (path_element == 0)
+	    break;
+
+	  match = find_in_path_element (name, path_element, flags, name_len, &dotinfo);
+
+	  free (path_element);
+
+	  if (match == 0)
+	    continue;
+
+	  if (match_index + 1 == match_list_size)
+	    {
+	      match_list_size += 10;
+	      match_list = strvec_resize (match_list, (match_list_size + 1));
+	    }
+
+	  match_list[match_index++] = match;
+	  match_list[match_index] = (char *)NULL;
+	  FREE (file_to_lose_on);
+	  file_to_lose_on = (char *)NULL;
+	}
+
+      /* We haven't returned any strings yet. */
+      match_index = 0;
+    }
+
+  match = match_list[match_index];
+
+  if (match)
+    match_index++;
+
+  return (match);
+}
+
+static char *
+find_absolute_program (name, flags)
+     const char *name;
+     int flags;
+{
+  int st;
+
+  st = file_status (name);
+
+  /* If the file doesn't exist, quit now. */
+  if ((st & FS_EXISTS) == 0)
+    return ((char *)NULL);
+
+  /* If we only care about whether the file exists or not, return
+     this filename.  Otherwise, maybe we care about whether this
+     file is executable.  If it is, and that is what we want, return it. */
+  if ((flags & FS_EXISTS) || ((flags & FS_EXEC_ONLY) && (st & FS_EXECABLE)))
+    return (savestring (name));
+
+  return (NULL);
+}
+
+static char *
+find_in_path_element (name, path, flags, name_len, dotinfop)
+     const char *name;
+     char *path;
+     int flags, name_len;
+     struct stat *dotinfop;
+{
+  int status;
+  char *full_path, *xpath;
+
+  xpath = (posixly_correct == 0 && *path == '~') ? bash_tilde_expand (path, 0) : path;
+
+  /* Remember the location of "." in the path, in all its forms
+     (as long as they begin with a `.', e.g. `./.') */
+  if (dot_found_in_search == 0 && *xpath == '.')
+    dot_found_in_search = same_file (".", xpath, dotinfop, (struct stat *)NULL);
+
+  full_path = sh_makepath (xpath, name, 0);
+
+  status = file_status (full_path);
+
+  if (xpath != path)
+    free (xpath);
+
+  if ((status & FS_EXISTS) == 0)
+    {
+      free (full_path);
+      return ((char *)NULL);
+    }
+
+  /* The file exists.  If the caller simply wants the first file, here it is. */
+  if (flags & FS_EXISTS)
+    return (full_path);
+
+  /* If we have a readable file, and the caller wants a readable file, this
+     is it. */
+  if ((flags & FS_READABLE) && (status & FS_READABLE))
+    return (full_path);
+
+  /* If the file is executable, then it satisfies the cases of
+      EXEC_ONLY and EXEC_PREFERRED.  Return this file unconditionally. */
+  if ((status & FS_EXECABLE) && (flags & (FS_EXEC_ONLY|FS_EXEC_PREFERRED)) &&
+      (((flags & FS_NODIRS) == 0) || ((status & FS_DIRECTORY) == 0)))
+    {
+      FREE (file_to_lose_on);
+      file_to_lose_on = (char *)NULL;
+      return (full_path);
+    }
+
+  /* The file is not executable, but it does exist.  If we prefer
+     an executable, then remember this one if it is the first one
+     we have found. */
+  if ((flags & FS_EXEC_PREFERRED) && file_to_lose_on == 0 && exec_name_should_ignore (full_path) == 0)
+    file_to_lose_on = savestring (full_path);
+
+  /* If we want only executable files, or we don't want directories and
+     this file is a directory, or we want a readable file and this file
+     isn't readable, fail. */
+  if ((flags & (FS_EXEC_ONLY|FS_EXEC_PREFERRED)) ||
+      ((flags & FS_NODIRS) && (status & FS_DIRECTORY)) ||
+      ((flags & FS_READABLE) && (status & FS_READABLE) == 0))
+    {
+      free (full_path);
+      return ((char *)NULL);
+    }
+  else
+    return (full_path);
+}
+
+/* This does the dirty work for find_user_command_internal () and
+   user_command_matches ().
+   NAME is the name of the file to search for.
+   PATH_LIST is a colon separated list of directories to search.
+   FLAGS contains bit fields which control the files which are eligible.
+   Some values are:
+      FS_EXEC_ONLY:		The file must be an executable to be found.
+      FS_EXEC_PREFERRED:	If we can't find an executable, then the
+				the first file matching NAME will do.
+      FS_EXISTS:		The first file found will do.
+      FS_NODIRS:		Don't find any directories.
+*/
+static char *
+find_user_command_in_path (name, path_list, flags)
+     const char *name;
+     char *path_list;
+     int flags;
+{
+  char *full_path, *path;
+  int path_index, name_len;
+  struct stat dotinfo;
+
+  /* We haven't started looking, so we certainly haven't seen
+     a `.' as the directory path yet. */
+  dot_found_in_search = 0;
+
+  if (absolute_program (name))
+    {
+      full_path = find_absolute_program (name, flags);
+      return (full_path);
+    }
+
+  if (path_list == 0 || *path_list == '\0')
+    return (savestring (name));		/* XXX */
+
+  file_to_lose_on = (char *)NULL;
+  name_len = strlen (name);
+  if (stat (".", &dotinfo) < 0)
+    dotinfo.st_dev = dotinfo.st_ino = 0;
+  path_index = 0;
+
+  while (path_list[path_index])
+    {
+      /* Allow the user to interrupt out of a lengthy path search. */
+      QUIT;
+
+      path = get_next_path_element (path_list, &path_index);
+      if (path == 0)
+	break;
+
+      /* Side effects: sets dot_found_in_search, possibly sets
+	 file_to_lose_on. */
+      full_path = find_in_path_element (name, path, flags, name_len, &dotinfo);
+      free (path);
+
+      /* This should really be in find_in_path_element, but there isn't the
+	 right combination of flags. */
+      if (full_path && is_directory (full_path))
+	{
+	  free (full_path);
+	  continue;
+	}
+
+      if (full_path)
+	{
+	  FREE (file_to_lose_on);
+	  return (full_path);
+	}
+    }
+
+  /* We didn't find exactly what the user was looking for.  Return
+     the contents of FILE_TO_LOSE_ON which is NULL when the search
+     required an executable, or non-NULL if a file was found and the
+     search would accept a non-executable as a last resort.  If the
+     caller specified FS_NODIRS, and file_to_lose_on is a directory,
+     return NULL. */
+  if (file_to_lose_on && (flags & FS_NODIRS) && is_directory (file_to_lose_on))
+    {
+      free (file_to_lose_on);
+      file_to_lose_on = (char *)NULL;
+    }
+
+  return (file_to_lose_on);
+}
+
+/* External interface to find a command given a $PATH.  Separate from
+   find_user_command_in_path to allow future customization. */
+char *
+find_in_path (name, path_list, flags)
+     const char *name;
+     char *path_list;
+     int flags;
+{
+  return (find_user_command_in_path (name, path_list, flags));
+}
diff --git a/findcmd.h b/findcmd.h
new file mode 100644
index 0000000..bf45781
--- /dev/null
+++ b/findcmd.h
@@ -0,0 +1,47 @@
+/* findcmd.h - functions from findcmd.c. */
+
+/* Copyright (C) 1997-2015,2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_FINDCMD_H_)
+#define _FINDCMD_H_
+
+#include "stdc.h"
+
+/* Flags for search_for_command */
+#define CMDSRCH_HASH		0x01
+#define CMDSRCH_STDPATH		0x02
+#define CMDSRCH_TEMPENV		0x04
+
+extern int file_status PARAMS((const char *));
+extern int executable_file PARAMS((const char *));
+extern int is_directory PARAMS((const char *));
+extern int executable_or_directory PARAMS((const char *));
+extern char *find_user_command PARAMS((const char *));
+extern char *find_in_path PARAMS((const char *, char *, int));
+extern char *find_path_file PARAMS((const char *));
+extern char *search_for_command PARAMS((const char *, int));
+extern char *user_command_matches PARAMS((const char *, int, int));
+extern void setup_exec_ignore PARAMS((char *));
+
+extern int dot_found_in_search;
+
+/* variables managed via shopt */
+extern int check_hashed_filenames;
+
+#endif /* _FINDCMD_H_ */
diff --git a/flags.c b/flags.c
new file mode 100644
index 0000000..983f9a5
--- /dev/null
+++ b/flags.c
@@ -0,0 +1,385 @@
+/* flags.c -- Everything about flags except the `set' command.  That
+   is in builtins.c */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "shell.h"
+#include "execute_cmd.h"
+#include "flags.h"
+
+#if defined (BANG_HISTORY)
+#  include "bashhist.h"
+#endif
+
+#if defined (JOB_CONTROL)
+extern int set_job_control PARAMS((int));
+#endif
+
+/* **************************************************************** */
+/*								    */
+/*			The Standard sh Flags.			    */
+/*								    */
+/* **************************************************************** */
+
+/* Non-zero means automatically mark variables which are modified or created
+   as auto export variables. */
+int mark_modified_vars = 0;
+
+/* Non-zero causes asynchronous job notification.  Otherwise, job state
+   notification only takes place just before a primary prompt is printed. */
+int asynchronous_notification = 0;
+
+/* Non-zero means exit immediately if a command exits with a non-zero
+   exit status.  The first is what controls set -e; the second is what
+   bash uses internally. */
+int errexit_flag = 0;
+int exit_immediately_on_error = 0;
+
+/* Non-zero means disable filename globbing. */
+int disallow_filename_globbing = 0;
+
+/* Non-zero means that all keyword arguments are placed into the environment
+   for a command, not just those that appear on the line before the command
+   name. */
+int place_keywords_in_env = 0;
+
+/* Non-zero means read commands, but don't execute them.  This is useful
+   for debugging shell scripts that should do something hairy and possibly
+   destructive. */
+int read_but_dont_execute = 0;
+
+/* Non-zero means end of file is after one command. */
+int just_one_command = 0;
+
+/* Non-zero means don't overwrite existing files while doing redirections. */
+int noclobber = 0;
+
+/* Non-zero means trying to get the value of $i where $i is undefined
+   causes an error, instead of a null substitution. */
+int unbound_vars_is_error = 0;
+
+/* Non-zero means type out input lines after you read them. */
+int echo_input_at_read = 0;
+int verbose_flag = 0;
+
+/* Non-zero means type out the command definition after reading, but
+   before executing. */
+int echo_command_at_execute = 0;
+
+/* Non-zero means turn on the job control features. */
+int jobs_m_flag = 0;
+
+/* Non-zero means this shell is interactive, even if running under a
+   pipe. */
+int forced_interactive = 0;
+
+/* By default, follow the symbolic links as if they were real directories
+   while hacking the `cd' command.  This means that `cd ..' moves up in
+   the string of symbolic links that make up the current directory, instead
+   of the absolute directory.  The shell variable `nolinks' also controls
+   this flag. */
+int no_symbolic_links = 0;
+
+/* **************************************************************** */
+/*								    */
+/*		     Non-Standard Flags Follow Here.		    */
+/*								    */
+/* **************************************************************** */
+
+#if 0
+/* Non-zero means do lexical scoping in the body of a FOR command. */
+int lexical_scoping = 0;
+#endif
+
+/* Non-zero means look up and remember command names in a hash table, */
+int hashing_enabled = 1;
+
+#if defined (BANG_HISTORY)
+/* Non-zero means that we are doing history expansion.  The default.
+   This means !22 gets the 22nd line of history. */
+int history_expansion = HISTEXPAND_DEFAULT;
+int histexp_flag = 0;
+#endif /* BANG_HISTORY */
+
+/* Non-zero means that we allow comments to appear in interactive commands. */
+int interactive_comments = 1;
+
+#if defined (RESTRICTED_SHELL)
+/* Non-zero means that this shell is `restricted'.  A restricted shell
+   disallows: changing directories, command or path names containing `/',
+   unsetting or resetting the values of $PATH and $SHELL, and any type of
+   output redirection. */
+int restricted = 0;		/* currently restricted */
+int restricted_shell = 0;	/* shell was started in restricted mode. */
+#endif /* RESTRICTED_SHELL */
+
+/* Non-zero means that this shell is running in `privileged' mode.  This
+   is required if the shell is to run setuid.  If the `-p' option is
+   not supplied at startup, and the real and effective uids or gids
+   differ, disable_priv_mode is called to relinquish setuid status. */
+int privileged_mode = 0;
+
+#if defined (BRACE_EXPANSION)
+/* Zero means to disable brace expansion: foo{a,b} -> fooa foob */
+int brace_expansion = 1;
+#endif
+
+/* Non-zero means that shell functions inherit the DEBUG trap. */
+int function_trace_mode = 0;
+
+/* Non-zero means that shell functions inherit the ERR trap. */
+int error_trace_mode = 0;
+
+/* Non-zero means that the rightmost non-zero exit status in a pipeline
+   is the exit status of the entire pipeline.  If each processes exits
+   with a 0 status, the status of the pipeline is 0. */
+int pipefail_opt = 0;
+
+/* **************************************************************** */
+/*								    */
+/*			The Flags ALIST.			    */
+/*								    */
+/* **************************************************************** */
+
+const struct flags_alist shell_flags[] = {
+  /* Standard sh flags. */
+  { 'a', &mark_modified_vars },
+#if defined (JOB_CONTROL)
+  { 'b', &asynchronous_notification },
+#endif /* JOB_CONTROL */
+  { 'e', &errexit_flag },
+  { 'f', &disallow_filename_globbing },
+  { 'h', &hashing_enabled },
+  { 'i', &forced_interactive },
+  { 'k', &place_keywords_in_env },
+#if defined (JOB_CONTROL)
+  { 'm', &jobs_m_flag },
+#endif /* JOB_CONTROL */
+  { 'n', &read_but_dont_execute },
+  { 'p', &privileged_mode },
+#if defined (RESTRICTED_SHELL)
+  { 'r', &restricted },
+#endif /* RESTRICTED_SHELL */
+  { 't', &just_one_command },
+  { 'u', &unbound_vars_is_error },
+  { 'v', &verbose_flag },
+  { 'x', &echo_command_at_execute },
+
+  /* New flags that control non-standard things. */
+#if 0
+  { 'l', &lexical_scoping },
+#endif
+#if defined (BRACE_EXPANSION)
+  { 'B', &brace_expansion },
+#endif
+  { 'C', &noclobber },
+  { 'E', &error_trace_mode },
+#if defined (BANG_HISTORY)
+  { 'H', &histexp_flag },
+#endif /* BANG_HISTORY */
+  { 'P', &no_symbolic_links },
+  { 'T', &function_trace_mode },
+  {0, (int *)NULL}
+};
+
+#define NUM_SHELL_FLAGS (sizeof (shell_flags) / sizeof (struct flags_alist))
+
+char optflags[NUM_SHELL_FLAGS+4] = { '+' };
+
+int *
+find_flag (name)
+     int name;
+{
+  int i;
+  for (i = 0; shell_flags[i].name; i++)
+    {
+      if (shell_flags[i].name == name)
+	return (shell_flags[i].value);
+    }
+  return (FLAG_UNKNOWN);
+}
+
+/* Change the state of a flag, and return it's original value, or return
+   FLAG_ERROR if there is no flag FLAG.  ON_OR_OFF must be either
+   FLAG_ON or FLAG_OFF. */
+int
+change_flag (flag, on_or_off)
+  int flag;
+  int on_or_off;
+{
+  int *value, old_value;
+
+#if defined (RESTRICTED_SHELL)
+  /* Don't allow "set +r" in a shell which is `restricted'. */
+  if (restricted && flag == 'r' && on_or_off == FLAG_OFF)
+    return (FLAG_ERROR);
+#endif /* RESTRICTED_SHELL */
+
+  value = find_flag (flag);
+
+  if ((value == (int *)FLAG_UNKNOWN) || (on_or_off != FLAG_ON && on_or_off != FLAG_OFF))
+    return (FLAG_ERROR);
+
+  old_value = *value;
+  *value = (on_or_off == FLAG_ON) ? 1 : 0;
+
+  /* Special cases for a few flags. */
+  switch (flag)
+    {
+#if defined (BANG_HISTORY)
+    case 'H':
+      history_expansion = histexp_flag;
+      if (on_or_off == FLAG_ON)
+	bash_initialize_history ();
+      break;
+#endif
+
+#if defined (JOB_CONTROL)
+    case 'm':
+      set_job_control (on_or_off == FLAG_ON);
+      break;
+#endif /* JOB_CONTROL */
+
+    case 'e':
+      if (builtin_ignoring_errexit == 0)
+	exit_immediately_on_error = errexit_flag;
+      break;
+
+    case 'n':
+      if (interactive_shell)
+	read_but_dont_execute = 0;
+      break;
+
+    case 'p':
+      if (on_or_off == FLAG_OFF)
+	disable_priv_mode ();
+      break;
+
+#if defined (RESTRICTED_SHELL)
+    case 'r':
+      if (on_or_off == FLAG_ON && shell_initialized)
+	maybe_make_restricted (shell_name);
+      break;
+#endif
+
+    case 'v':
+      echo_input_at_read = verbose_flag;
+      break;
+    }
+
+  return (old_value);
+}
+
+/* Return a string which is the names of all the currently
+   set shell flags. */
+char *
+which_set_flags ()
+{
+  char *temp;
+  int i, string_index;
+
+  temp = (char *)xmalloc (1 + NUM_SHELL_FLAGS + read_from_stdin + want_pending_command);
+  for (i = string_index = 0; shell_flags[i].name; i++)
+    if (*(shell_flags[i].value))
+      temp[string_index++] = shell_flags[i].name;
+
+  if (want_pending_command)
+    temp[string_index++] = 'c';
+  if (read_from_stdin)
+    temp[string_index++] = 's';
+
+  temp[string_index] = '\0';
+  return (temp);
+}
+
+char *
+get_current_flags ()
+{
+  char *temp;
+  int i;
+
+  temp = (char *)xmalloc (1 + NUM_SHELL_FLAGS);
+  for (i = 0; shell_flags[i].name; i++)
+    temp[i] = *(shell_flags[i].value);
+  temp[i] = '\0';
+  return (temp);
+}
+
+void
+set_current_flags (bitmap)
+     const char *bitmap;
+{
+  int i;
+
+  if (bitmap == 0)
+    return;
+  for (i = 0; shell_flags[i].name; i++)
+    *(shell_flags[i].value) = bitmap[i];
+}
+
+void
+reset_shell_flags ()
+{
+  mark_modified_vars = disallow_filename_globbing = 0;
+  place_keywords_in_env = read_but_dont_execute = just_one_command = 0;
+  noclobber = unbound_vars_is_error = 0;
+  echo_command_at_execute = jobs_m_flag = forced_interactive = 0;
+  no_symbolic_links = 0;
+  privileged_mode = pipefail_opt = 0;
+
+  error_trace_mode = function_trace_mode = 0;
+
+  exit_immediately_on_error = errexit_flag = 0;
+  echo_input_at_read = verbose_flag = 0;
+
+  hashing_enabled = interactive_comments = 1;
+
+#if defined (JOB_CONTROL)
+  asynchronous_notification = 0;
+#endif
+
+#if defined (BANG_HISTORY)
+  histexp_flag = 0;
+#endif
+
+#if defined (BRACE_EXPANSION)
+  brace_expansion = 1;
+#endif
+
+#if defined (RESTRICTED_SHELL)
+  restricted = 0;
+#endif
+}
+
+void
+initialize_flags ()
+{
+  register int i;
+
+  for (i = 0; shell_flags[i].name; i++)
+    optflags[i+1] = shell_flags[i].name;
+  optflags[++i] = 'o';
+  optflags[++i] = ';';
+  optflags[i+1] = '\0';
+}
diff --git a/flags.h b/flags.h
new file mode 100644
index 0000000..a3b5daa
--- /dev/null
+++ b/flags.h
@@ -0,0 +1,87 @@
+/* flags.h -- a list of all the flags that the shell knows about.  You add
+   a flag to this program by adding the name here, and in flags.c. */
+
+/* Copyright (C) 1993-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_FLAGS_H_)
+#define _FLAGS_H_
+
+#include "stdc.h"
+
+/* Welcome to the world of Un*x, where everything is slightly backwards. */
+#define FLAG_ON '-'
+#define FLAG_OFF '+'
+
+#define FLAG_ERROR -1
+#define FLAG_UNKNOWN (int *)0
+
+/* The thing that we build the array of flags out of. */
+struct flags_alist {
+  char name;
+  int *value;
+};
+
+extern const struct flags_alist shell_flags[];
+extern char optflags[];
+
+extern int
+  mark_modified_vars, errexit_flag, exit_immediately_on_error,
+  disallow_filename_globbing,
+  place_keywords_in_env, read_but_dont_execute,
+  just_one_command, unbound_vars_is_error, echo_input_at_read, verbose_flag,
+  echo_command_at_execute, noclobber,
+  hashing_enabled, forced_interactive, privileged_mode, jobs_m_flag,
+  asynchronous_notification, interactive_comments, no_symbolic_links,
+  function_trace_mode, error_trace_mode, pipefail_opt;
+
+/* -c, -s invocation options -- not really flags, but they show up in $- */
+extern int want_pending_command, read_from_stdin;
+
+#if 0
+extern int lexical_scoping;
+#endif
+
+#if defined (BRACE_EXPANSION)
+extern int brace_expansion;
+#endif
+
+#if defined (BANG_HISTORY)
+extern int history_expansion;
+extern int histexp_flag;
+#endif /* BANG_HISTORY */
+
+#if defined (RESTRICTED_SHELL)
+extern int restricted;
+extern int restricted_shell;
+#endif /* RESTRICTED_SHELL */
+
+extern int *find_flag PARAMS((int));
+extern int change_flag PARAMS((int, int));
+extern char *which_set_flags PARAMS((void));
+extern void reset_shell_flags PARAMS((void));
+
+extern char *get_current_flags PARAMS((void));
+extern void set_current_flags PARAMS((const char *));
+
+extern void initialize_flags PARAMS((void));
+
+/* A macro for efficiency. */
+#define change_flag_char(flag, on_or_off)  change_flag (flag, on_or_off)
+
+#endif /* _FLAGS_H_ */
diff --git a/general.c b/general.c
new file mode 100644
index 0000000..50d5216
--- /dev/null
+++ b/general.c
@@ -0,0 +1,1441 @@
+/* general.c -- Stuff that is used by all files. */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include "bashtypes.h"
+#if defined (HAVE_SYS_PARAM_H)
+#  include <sys/param.h>
+#endif
+#include "posixstat.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "filecntl.h"
+#include "bashansi.h"
+#include <stdio.h>
+#include "chartypes.h"
+#include <errno.h>
+
+#include "bashintl.h"
+
+#include "shell.h"
+#include "parser.h"
+#include "flags.h"
+#include "findcmd.h"
+#include "test.h"
+#include "trap.h"
+#include "pathexp.h"
+
+#include "builtins/common.h"
+
+#if defined (HAVE_MBSTR_H) && defined (HAVE_MBSCHR)
+#  include <mbstr.h>		/* mbschr */
+#endif
+
+#include <tilde/tilde.h>
+
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+#ifdef __CYGWIN__
+#  include <sys/cygwin.h>
+#endif
+
+static char *bash_special_tilde_expansions PARAMS((char *));
+static int unquoted_tilde_word PARAMS((const char *));
+static void initialize_group_array PARAMS((void));
+
+/* A standard error message to use when getcwd() returns NULL. */
+const char * const bash_getcwd_errstr = N_("getcwd: cannot access parent directories");
+
+/* Do whatever is necessary to initialize `Posix mode'.  This currently
+   modifies the following variables which are controlled via shopt:
+      interactive_comments
+      source_uses_path
+      expand_aliases
+      inherit_errexit
+      print_shift_error
+      posixglob
+
+   and the following variables which cannot be user-modified:
+
+      source_searches_cwd
+
+  If we add to the first list, we need to change the table and functions
+  below */
+
+static struct {
+  int *posix_mode_var;
+} posix_vars[] = 
+{
+  &interactive_comments,
+  &source_uses_path,
+  &expand_aliases,
+  &inherit_errexit,
+  &print_shift_error,
+  0
+};
+
+static char *saved_posix_vars = 0;
+
+void
+posix_initialize (on)
+     int on;
+{
+  /* Things that should be turned on when posix mode is enabled. */
+  if (on != 0)
+    {
+      interactive_comments = source_uses_path = expand_aliases = 1;
+      inherit_errexit = 1;
+      source_searches_cwd = 0;
+      print_shift_error = 1;
+    }
+
+  /* Things that should be turned on when posix mode is disabled. */
+  else if (saved_posix_vars)		/* on == 0, restore saved settings */
+    {
+      set_posix_options (saved_posix_vars);
+      free (saved_posix_vars);
+      saved_posix_vars = 0;
+    }
+  else	/* on == 0, restore a default set of settings */
+    {
+      source_searches_cwd = 1;
+      expand_aliases = interactive_shell;
+      print_shift_error = 0;
+    }
+}
+
+int
+num_posix_options ()
+{
+  return ((sizeof (posix_vars) / sizeof (posix_vars[0])) - 1);
+}
+
+char *
+get_posix_options (bitmap)
+     char *bitmap;
+{
+  register int i;
+
+  if (bitmap == 0)
+    bitmap = (char *)xmalloc (num_posix_options ());	/* no trailing NULL */
+  for (i = 0; posix_vars[i].posix_mode_var; i++)
+    bitmap[i] = *(posix_vars[i].posix_mode_var);
+  return bitmap;
+}
+
+#undef save_posix_options
+void
+save_posix_options ()
+{
+  saved_posix_vars = get_posix_options (saved_posix_vars);
+}
+
+void
+set_posix_options (bitmap)
+     const char *bitmap;
+{
+  register int i;
+
+  for (i = 0; posix_vars[i].posix_mode_var; i++)
+    *(posix_vars[i].posix_mode_var) = bitmap[i];
+}
+
+/* **************************************************************** */
+/*								    */
+/*  Functions to convert to and from and display non-standard types */
+/*								    */
+/* **************************************************************** */
+
+#if defined (RLIMTYPE)
+RLIMTYPE
+string_to_rlimtype (s)
+     char *s;
+{
+  RLIMTYPE ret;
+  int neg;
+
+  ret = 0;
+  neg = 0;
+  while (s && *s && whitespace (*s))
+    s++;
+  if (s && (*s == '-' || *s == '+'))
+    {
+      neg = *s == '-';
+      s++;
+    }
+  for ( ; s && *s && DIGIT (*s); s++)
+    ret = (ret * 10) + TODIGIT (*s);
+  return (neg ? -ret : ret);
+}
+
+void
+print_rlimtype (n, addnl)
+     RLIMTYPE n;
+     int addnl;
+{
+  char s[INT_STRLEN_BOUND (RLIMTYPE) + 1], *p;
+
+  p = s + sizeof(s);
+  *--p = '\0';
+
+  if (n < 0)
+    {
+      do
+	*--p = '0' - n % 10;
+      while ((n /= 10) != 0);
+
+      *--p = '-';
+    }
+  else
+    {
+      do
+	*--p = '0' + n % 10;
+      while ((n /= 10) != 0);
+    }
+
+  printf ("%s%s", p, addnl ? "\n" : "");
+}
+#endif /* RLIMTYPE */
+
+/* **************************************************************** */
+/*								    */
+/*		       Input Validation Functions		    */
+/*								    */
+/* **************************************************************** */
+
+/* Return non-zero if all of the characters in STRING are digits. */
+int
+all_digits (string)
+     const char *string;
+{
+  register const char *s;
+
+  for (s = string; *s; s++)
+    if (DIGIT (*s) == 0)
+      return (0);
+
+  return (1);
+}
+
+/* Return non-zero if the characters pointed to by STRING constitute a
+   valid number.  Stuff the converted number into RESULT if RESULT is
+   not null. */
+int
+legal_number (string, result)
+     const char *string;
+     intmax_t *result;
+{
+  intmax_t value;
+  char *ep;
+
+  if (result)
+    *result = 0;
+
+  if (string == 0)
+    return 0;
+
+  errno = 0;
+  value = strtoimax (string, &ep, 10);
+  if (errno || ep == string)
+    return 0;	/* errno is set on overflow or underflow */
+
+  /* Skip any trailing whitespace, since strtoimax does not. */
+  while (whitespace (*ep))
+    ep++;
+
+  /* If *string is not '\0' but *ep is '\0' on return, the entire string
+     is valid. */
+  if (*string && *ep == '\0')
+    {
+      if (result)
+	*result = value;
+      /* The SunOS4 implementation of strtol() will happily ignore
+	 overflow conditions, so this cannot do overflow correctly
+	 on those systems. */
+      return 1;
+    }
+    
+  return (0);
+}
+
+/* Return 1 if this token is a legal shell `identifier'; that is, it consists
+   solely of letters, digits, and underscores, and does not begin with a
+   digit. */
+int
+legal_identifier (name)
+     const char *name;
+{
+  register const char *s;
+  unsigned char c;
+
+  if (!name || !(c = *name) || (legal_variable_starter (c) == 0))
+    return (0);
+
+  for (s = name + 1; (c = *s) != 0; s++)
+    {
+      if (legal_variable_char (c) == 0)
+	return (0);
+    }
+  return (1);
+}
+
+/* Return 1 if NAME is a valid value that can be assigned to a nameref
+   variable.  FLAGS can be 2, in which case the name is going to be used
+   to create a variable.  Other values are currently unused, but could
+   be used to allow values to be stored and indirectly referenced, but
+   not used in assignments. */
+int
+valid_nameref_value (name, flags)
+     const char *name;
+     int flags;
+{
+  if (name == 0 || *name == 0)
+    return 0;
+
+  /* valid identifier */
+#if defined (ARRAY_VARS)  
+  if (legal_identifier (name) || (flags != 2 && valid_array_reference (name, 0)))
+#else
+  if (legal_identifier (name))
+#endif
+    return 1;
+
+  return 0;
+}
+
+int
+check_selfref (name, value, flags)
+     const char *name;
+     char *value;
+     int flags;
+{
+  char *t;
+
+  if (STREQ (name, value))
+    return 1;
+
+#if defined (ARRAY_VARS)
+  if (valid_array_reference (value, 0))
+    {
+      t = array_variable_name (value, 0, (char **)NULL, (int *)NULL);
+      if (t && STREQ (name, t))
+	{
+	  free (t);
+	  return 1;
+	}
+      free (t);
+    }
+#endif
+
+  return 0;	/* not a self reference */
+}
+
+/* Make sure that WORD is a valid shell identifier, i.e.
+   does not contain a dollar sign, nor is quoted in any way.
+   If CHECK_WORD is non-zero,
+   the word is checked to ensure that it consists of only letters,
+   digits, and underscores, and does not consist of all digits. */
+int
+check_identifier (word, check_word)
+     WORD_DESC *word;
+     int check_word;
+{
+  if (word->flags & (W_HASDOLLAR|W_QUOTED))	/* XXX - HASDOLLAR? */
+    {
+      internal_error (_("`%s': not a valid identifier"), word->word);
+      return (0);
+    }
+  else if (check_word && (all_digits (word->word) || legal_identifier (word->word) == 0))
+    {
+      internal_error (_("`%s': not a valid identifier"), word->word);
+      return (0);
+    }
+  else
+    return (1);
+}
+
+/* Return 1 if STRING is a function name that the shell will import from
+   the environment.  Currently we reject attempts to import shell functions
+   containing slashes, beginning with newlines or containing blanks.  In
+   Posix mode, we require that STRING be a valid shell identifier.  Not
+   used yet. */
+int
+importable_function_name (string, len)
+     const char *string;
+     size_t len;
+{
+  if (absolute_program (string))	/* don't allow slash */
+    return 0;
+  if (*string == '\n')			/* can't start with a newline */
+    return 0;
+  if (shellblank (*string) || shellblank(string[len-1]))
+    return 0;
+  return (posixly_correct ? legal_identifier (string) : 1);
+}
+
+int
+exportable_function_name (string)
+     const char *string;
+{
+  if (absolute_program (string))
+    return 0;
+  if (mbschr (string, '=') != 0)
+    return 0;
+  return 1;
+}
+
+/* Return 1 if STRING comprises a valid alias name.  The shell accepts
+   essentially all characters except those which must be quoted to the
+   parser (which disqualifies them from alias expansion anyway) and `/'. */
+int
+legal_alias_name (string, flags)
+     const char *string;
+     int flags;
+{
+  register const char *s;
+
+  for (s = string; *s; s++)
+    if (shellbreak (*s) || shellxquote (*s) || shellexp (*s) || (*s == '/'))
+      return 0;
+  return 1;
+}
+
+/* Returns non-zero if STRING is an assignment statement.  The returned value
+   is the index of the `=' sign.  If FLAGS&1 we are expecting a compound assignment
+   and require an array subscript before the `=' to denote an assignment
+   statement. */
+int
+assignment (string, flags)
+     const char *string;
+     int flags;
+{
+  register unsigned char c;
+  register int newi, indx;
+
+  c = string[indx = 0];
+
+#if defined (ARRAY_VARS)
+  /* If parser_state includes PST_COMPASSIGN, FLAGS will include 1, so we are
+     parsing the contents of a compound assignment. If parser_state includes
+     PST_REPARSE, we are in the middle of an assignment statement and breaking
+     the words between the parens into words and assignment statements, but
+     we don't need to check for that right now. Within a compound assignment,
+     the subscript is required to make the word an assignment statement. If
+     we don't have a subscript, even if the word is a valid assignment
+     statement otherwise, we don't want to treat it as one. */
+  if ((flags & 1) && c != '[')		/* ] */
+    return (0);
+  else if ((flags & 1) == 0 && legal_variable_starter (c) == 0)
+#else
+  if (legal_variable_starter (c) == 0)
+#endif
+    return (0);
+
+  while (c = string[indx])
+    {
+      /* The following is safe.  Note that '=' at the start of a word
+	 is not an assignment statement. */
+      if (c == '=')
+	return (indx);
+
+#if defined (ARRAY_VARS)
+      if (c == '[')
+	{
+	  newi = skipsubscript (string, indx, (flags & 2) ? 1 : 0);
+	  /* XXX - why not check for blank subscripts here, if we do in
+	     valid_array_reference? */
+	  if (string[newi++] != ']')
+	    return (0);
+	  if (string[newi] == '+' && string[newi+1] == '=')
+	    return (newi + 1);
+	  return ((string[newi] == '=') ? newi : 0);
+	}
+#endif /* ARRAY_VARS */
+
+      /* Check for `+=' */
+      if (c == '+' && string[indx+1] == '=')
+	return (indx + 1);
+
+      /* Variable names in assignment statements may contain only letters,
+	 digits, and `_'. */
+      if (legal_variable_char (c) == 0)
+	return (0);
+
+      indx++;
+    }
+  return (0);
+}
+
+int
+line_isblank (line)
+     const char *line;
+{
+  register int i;
+
+  if (line == 0)
+    return 0;		/* XXX */
+  for (i = 0; line[i]; i++)
+    if (isblank ((unsigned char)line[i]) == 0)
+      break;
+  return (line[i] == '\0');  
+}
+
+/* **************************************************************** */
+/*								    */
+/*	     Functions to manage files and file descriptors	    */
+/*								    */
+/* **************************************************************** */
+
+/* A function to unset no-delay mode on a file descriptor.  Used in shell.c
+   to unset it on the fd passed as stdin.  Should be called on stdin if
+   readline gets an EAGAIN or EWOULDBLOCK when trying to read input. */
+
+#if !defined (O_NDELAY)
+#  if defined (FNDELAY)
+#    define O_NDELAY FNDELAY
+#  endif
+#endif /* O_NDELAY */
+
+/* Make sure no-delay mode is not set on file descriptor FD. */
+int
+sh_unset_nodelay_mode (fd)
+     int fd;
+{
+  int flags, bflags;
+
+  if ((flags = fcntl (fd, F_GETFL, 0)) < 0)
+    return -1;
+
+  bflags = 0;
+
+  /* This is defined to O_NDELAY in filecntl.h if O_NONBLOCK is not present
+     and O_NDELAY is defined. */
+#ifdef O_NONBLOCK
+  bflags |= O_NONBLOCK;
+#endif
+
+#ifdef O_NDELAY
+  bflags |= O_NDELAY;
+#endif
+
+  if (flags & bflags)
+    {
+      flags &= ~bflags;
+      return (fcntl (fd, F_SETFL, flags));
+    }
+
+  return 0;
+}
+
+/* Just a wrapper for the define in include/filecntl.h */
+int
+sh_setclexec (fd)
+     int fd;
+{
+  return (SET_CLOSE_ON_EXEC (fd));
+}
+
+/* Return 1 if file descriptor FD is valid; 0 otherwise. */
+int
+sh_validfd (fd)
+     int fd;
+{
+  return (fcntl (fd, F_GETFD, 0) >= 0);
+}
+
+int
+fd_ispipe (fd)
+     int fd;
+{
+  errno = 0;
+  return ((lseek (fd, 0L, SEEK_CUR) < 0) && (errno == ESPIPE));
+}
+
+/* There is a bug in the NeXT 2.1 rlogind that causes opens
+   of /dev/tty to fail. */
+
+#if defined (__BEOS__)
+/* On BeOS, opening in non-blocking mode exposes a bug in BeOS, so turn it
+   into a no-op.  This should probably go away in the future. */
+#  undef O_NONBLOCK
+#  define O_NONBLOCK 0
+#endif /* __BEOS__ */
+
+void
+check_dev_tty ()
+{
+  int tty_fd;
+  char *tty;
+
+  tty_fd = open ("/dev/tty", O_RDWR|O_NONBLOCK);
+
+  if (tty_fd < 0)
+    {
+      tty = (char *)ttyname (fileno (stdin));
+      if (tty == 0)
+	return;
+      tty_fd = open (tty, O_RDWR|O_NONBLOCK);
+    }
+  if (tty_fd >= 0)
+    close (tty_fd);
+}
+
+/* Return 1 if PATH1 and PATH2 are the same file.  This is kind of
+   expensive.  If non-NULL STP1 and STP2 point to stat structures
+   corresponding to PATH1 and PATH2, respectively. */
+int
+same_file (path1, path2, stp1, stp2)
+     const char *path1, *path2;
+     struct stat *stp1, *stp2;
+{
+  struct stat st1, st2;
+
+  if (stp1 == NULL)
+    {
+      if (stat (path1, &st1) != 0)
+	return (0);
+      stp1 = &st1;
+    }
+
+  if (stp2 == NULL)
+    {
+      if (stat (path2, &st2) != 0)
+	return (0);
+      stp2 = &st2;
+    }
+
+  return ((stp1->st_dev == stp2->st_dev) && (stp1->st_ino == stp2->st_ino));
+}
+
+/* Move FD to a number close to the maximum number of file descriptors
+   allowed in the shell process, to avoid the user stepping on it with
+   redirection and causing us extra work.  If CHECK_NEW is non-zero,
+   we check whether or not the file descriptors are in use before
+   duplicating FD onto them.  MAXFD says where to start checking the
+   file descriptors.  If it's less than 20, we get the maximum value
+   available from getdtablesize(2). */
+int
+move_to_high_fd (fd, check_new, maxfd)
+     int fd, check_new, maxfd;
+{
+  int script_fd, nfds, ignore;
+
+  if (maxfd < 20)
+    {
+      nfds = getdtablesize ();
+      if (nfds <= 0)
+	nfds = 20;
+      if (nfds > HIGH_FD_MAX)
+	nfds = HIGH_FD_MAX;		/* reasonable maximum */
+    }
+  else
+    nfds = maxfd;
+
+  for (nfds--; check_new && nfds > 3; nfds--)
+    if (fcntl (nfds, F_GETFD, &ignore) == -1)
+      break;
+
+  if (nfds > 3 && fd != nfds && (script_fd = dup2 (fd, nfds)) != -1)
+    {
+      if (check_new == 0 || fd != fileno (stderr))	/* don't close stderr */
+	close (fd);
+      return (script_fd);
+    }
+
+  /* OK, we didn't find one less than our artificial maximum; return the
+     original file descriptor. */
+  return (fd);
+}
+ 
+/* Return non-zero if the characters from SAMPLE are not all valid
+   characters to be found in the first line of a shell script.  We
+   check up to the first newline, or SAMPLE_LEN, whichever comes first.
+   All of the characters must be printable or whitespace. */
+
+int
+check_binary_file (sample, sample_len)
+     const char *sample;
+     int sample_len;
+{
+  register int i;
+  unsigned char c;
+
+  for (i = 0; i < sample_len; i++)
+    {
+      c = sample[i];
+      if (c == '\n')
+	return (0);
+      if (c == '\0')
+	return (1);
+    }
+
+  return (0);
+}
+
+/* **************************************************************** */
+/*								    */
+/*		    Functions to manipulate pipes		    */
+/*								    */
+/* **************************************************************** */
+
+int
+sh_openpipe (pv)
+     int *pv;
+{
+  int r;
+
+  if ((r = pipe (pv)) < 0)
+    return r;
+
+  pv[0] = move_to_high_fd (pv[0], 1, 64);
+  pv[1] = move_to_high_fd (pv[1], 1, 64);
+
+  return 0;  
+}
+
+int
+sh_closepipe (pv)
+     int *pv;
+{
+  if (pv[0] >= 0)
+    close (pv[0]);
+
+  if (pv[1] >= 0)
+    close (pv[1]);
+
+  pv[0] = pv[1] = -1;
+  return 0;
+}
+
+/* **************************************************************** */
+/*								    */
+/*		    Functions to inspect pathnames		    */
+/*								    */
+/* **************************************************************** */
+
+int
+file_exists (fn)
+     const char *fn;
+{
+  struct stat sb;
+
+  return (stat (fn, &sb) == 0);
+}
+
+int
+file_isdir (fn)
+     const char *fn;
+{
+  struct stat sb;
+
+  return ((stat (fn, &sb) == 0) && S_ISDIR (sb.st_mode));
+}
+
+int
+file_iswdir (fn)
+     const char *fn;
+{
+  return (file_isdir (fn) && sh_eaccess (fn, W_OK) == 0);
+}
+
+/* Return 1 if STRING is "." or "..", optionally followed by a directory
+   separator */
+int
+path_dot_or_dotdot (string)
+     const char *string;
+{
+  if (string == 0 || *string == '\0' || *string != '.')
+    return (0);
+
+  /* string[0] == '.' */
+  if (PATHSEP(string[1]) || (string[1] == '.' && PATHSEP(string[2])))
+    return (1);
+
+  return (0);
+}
+
+/* Return 1 if STRING contains an absolute pathname, else 0.  Used by `cd'
+   to decide whether or not to look up a directory name in $CDPATH. */
+int
+absolute_pathname (string)
+     const char *string;
+{
+  if (string == 0 || *string == '\0')
+    return (0);
+
+  if (ABSPATH(string))
+    return (1);
+
+  if (string[0] == '.' && PATHSEP(string[1]))	/* . and ./ */
+    return (1);
+
+  if (string[0] == '.' && string[1] == '.' && PATHSEP(string[2]))	/* .. and ../ */
+    return (1);
+
+  return (0);
+}
+
+/* Return 1 if STRING is an absolute program name; it is absolute if it
+   contains any slashes.  This is used to decide whether or not to look
+   up through $PATH. */
+int
+absolute_program (string)
+     const char *string;
+{
+  return ((char *)mbschr (string, '/') != (char *)NULL);
+}
+
+/* **************************************************************** */
+/*								    */
+/*		    Functions to manipulate pathnames		    */
+/*								    */
+/* **************************************************************** */
+
+/* Turn STRING (a pathname) into an absolute pathname, assuming that
+   DOT_PATH contains the symbolic location of `.'.  This always
+   returns a new string, even if STRING was an absolute pathname to
+   begin with. */
+char *
+make_absolute (string, dot_path)
+     const char *string, *dot_path;
+{
+  char *result;
+
+  if (dot_path == 0 || ABSPATH(string))
+#ifdef __CYGWIN__
+    {
+      char pathbuf[PATH_MAX + 1];
+
+      /* WAS cygwin_conv_to_full_posix_path (string, pathbuf); */
+      cygwin_conv_path (CCP_WIN_A_TO_POSIX, string, pathbuf, PATH_MAX);
+      result = savestring (pathbuf);
+    }
+#else
+    result = savestring (string);
+#endif
+  else
+    result = sh_makepath (dot_path, string, 0);
+
+  return (result);
+}
+
+/* Return the `basename' of the pathname in STRING (the stuff after the
+   last '/').  If STRING is `/', just return it. */
+char *
+base_pathname (string)
+     char *string;
+{
+  char *p;
+
+#if 0
+  if (absolute_pathname (string) == 0)
+    return (string);
+#endif
+
+  if (string[0] == '/' && string[1] == 0)
+    return (string);
+
+  p = (char *)strrchr (string, '/');
+  return (p ? ++p : string);
+}
+
+/* Return the full pathname of FILE.  Easy.  Filenames that begin
+   with a '/' are returned as themselves.  Other filenames have
+   the current working directory prepended.  A new string is
+   returned in either case. */
+char *
+full_pathname (file)
+     char *file;
+{
+  char *ret;
+
+  file = (*file == '~') ? bash_tilde_expand (file, 0) : savestring (file);
+
+  if (ABSPATH(file))
+    return (file);
+
+  ret = sh_makepath ((char *)NULL, file, (MP_DOCWD|MP_RMDOT));
+  free (file);
+
+  return (ret);
+}
+
+/* A slightly related function.  Get the prettiest name of this
+   directory possible. */
+static char tdir[PATH_MAX];
+
+/* Return a pretty pathname.  If the first part of the pathname is
+   the same as $HOME, then replace that with `~'.  */
+char *
+polite_directory_format (name)
+     char *name;
+{
+  char *home;
+  int l;
+
+  home = get_string_value ("HOME");
+  l = home ? strlen (home) : 0;
+  if (l > 1 && strncmp (home, name, l) == 0 && (!name[l] || name[l] == '/'))
+    {
+      strncpy (tdir + 1, name + l, sizeof(tdir) - 2);
+      tdir[0] = '~';
+      tdir[sizeof(tdir) - 1] = '\0';
+      return (tdir);
+    }
+  else
+    return (name);
+}
+
+/* Trim NAME.  If NAME begins with `~/', skip over tilde prefix.  Trim to
+   keep any tilde prefix and PROMPT_DIRTRIM trailing directory components
+   and replace the intervening characters with `...' */
+char *
+trim_pathname (name, maxlen)
+     char *name;
+     int maxlen;
+{
+  int nlen, ndirs;
+  intmax_t nskip;
+  char *nbeg, *nend, *ntail, *v;
+
+  if (name == 0 || (nlen = strlen (name)) == 0)
+    return name;
+  nend = name + nlen;
+
+  v = get_string_value ("PROMPT_DIRTRIM");
+  if (v == 0 || *v == 0)
+    return name;
+  if (legal_number (v, &nskip) == 0 || nskip <= 0)
+    return name;
+
+  /* Skip over tilde prefix */
+  nbeg = name;
+  if (name[0] == '~')
+    for (nbeg = name; *nbeg; nbeg++)
+      if (*nbeg == '/')
+	{
+	  nbeg++;
+	  break;
+	}
+  if (*nbeg == 0)
+    return name;
+
+  for (ndirs = 0, ntail = nbeg; *ntail; ntail++)
+    if (*ntail == '/')
+      ndirs++;
+  if (ndirs < nskip)
+    return name;
+
+  for (ntail = (*nend == '/') ? nend : nend - 1; ntail > nbeg; ntail--)
+    {
+      if (*ntail == '/')
+	nskip--;
+      if (nskip == 0)
+	break;
+    }
+  if (ntail == nbeg)
+    return name;
+
+  /* Now we want to return name[0..nbeg]+"..."+ntail, modifying name in place */
+  nlen = ntail - nbeg;
+  if (nlen <= 3)
+    return name;
+
+  *nbeg++ = '.';
+  *nbeg++ = '.';
+  *nbeg++ = '.';
+
+  nlen = nend - ntail;
+  memmove (nbeg, ntail, nlen);
+  nbeg[nlen] = '\0';
+
+  return name;
+}
+
+/* Return a printable representation of FN without special characters.  The
+   caller is responsible for freeing memory if this returns something other
+   than its argument.  If FLAGS is non-zero, we are printing for portable
+   re-input and should single-quote filenames appropriately. */
+char *
+printable_filename (fn, flags)
+     char *fn;
+     int flags;
+{
+  char *newf;
+
+  if (ansic_shouldquote (fn))
+    newf = ansic_quote (fn, 0, NULL);
+  else if (flags && sh_contains_shell_metas (fn))
+    newf = sh_single_quote (fn);
+  else
+    newf = fn;
+
+  return newf;
+}
+
+/* Given a string containing units of information separated by colons,
+   return the next one pointed to by (P_INDEX), or NULL if there are no more.
+   Advance (P_INDEX) to the character after the colon. */
+char *
+extract_colon_unit (string, p_index)
+     char *string;
+     int *p_index;
+{
+  int i, start, len;
+  char *value;
+
+  if (string == 0)
+    return (string);
+
+  len = strlen (string);
+  if (*p_index >= len)
+    return ((char *)NULL);
+
+  i = *p_index;
+
+  /* Each call to this routine leaves the index pointing at a colon if
+     there is more to the path.  If I is > 0, then increment past the
+     `:'.  If I is 0, then the path has a leading colon.  Trailing colons
+     are handled OK by the `else' part of the if statement; an empty
+     string is returned in that case. */
+  if (i && string[i] == ':')
+    i++;
+
+  for (start = i; string[i] && string[i] != ':'; i++)
+    ;
+
+  *p_index = i;
+
+  if (i == start)
+    {
+      if (string[i])
+	(*p_index)++;
+      /* Return "" in the case of a trailing `:'. */
+      value = (char *)xmalloc (1);
+      value[0] = '\0';
+    }
+  else
+    value = substring (string, start, i);
+
+  return (value);
+}
+
+/* **************************************************************** */
+/*								    */
+/*		    Tilde Initialization and Expansion		    */
+/*								    */
+/* **************************************************************** */
+
+#if defined (PUSHD_AND_POPD)
+extern char *get_dirstack_from_string PARAMS((char *));
+#endif
+
+static char **bash_tilde_prefixes;
+static char **bash_tilde_prefixes2;
+static char **bash_tilde_suffixes;
+static char **bash_tilde_suffixes2;
+
+/* If tilde_expand hasn't been able to expand the text, perhaps it
+   is a special shell expansion.  This function is installed as the
+   tilde_expansion_preexpansion_hook.  It knows how to expand ~- and ~+.
+   If PUSHD_AND_POPD is defined, ~[+-]N expands to directories from the
+   directory stack. */
+static char *
+bash_special_tilde_expansions (text)
+     char *text;
+{
+  char *result;
+
+  result = (char *)NULL;
+
+  if (text[0] == '+' && text[1] == '\0')
+    result = get_string_value ("PWD");
+  else if (text[0] == '-' && text[1] == '\0')
+    result = get_string_value ("OLDPWD");
+#if defined (PUSHD_AND_POPD)
+  else if (DIGIT (*text) || ((*text == '+' || *text == '-') && DIGIT (text[1])))
+    result = get_dirstack_from_string (text);
+#endif
+
+  return (result ? savestring (result) : (char *)NULL);
+}
+
+/* Initialize the tilde expander.  In Bash, we handle `~-' and `~+', as
+   well as handling special tilde prefixes; `:~" and `=~' are indications
+   that we should do tilde expansion. */
+void
+tilde_initialize ()
+{
+  static int times_called = 0;
+
+  /* Tell the tilde expander that we want a crack first. */
+  tilde_expansion_preexpansion_hook = bash_special_tilde_expansions;
+
+  /* Tell the tilde expander about special strings which start a tilde
+     expansion, and the special strings that end one.  Only do this once.
+     tilde_initialize () is called from within bashline_reinitialize (). */
+  if (times_called++ == 0)
+    {
+      bash_tilde_prefixes = strvec_create (3);
+      bash_tilde_prefixes[0] = "=~";
+      bash_tilde_prefixes[1] = ":~";
+      bash_tilde_prefixes[2] = (char *)NULL;
+
+      bash_tilde_prefixes2 = strvec_create (2);
+      bash_tilde_prefixes2[0] = ":~";
+      bash_tilde_prefixes2[1] = (char *)NULL;
+
+      tilde_additional_prefixes = bash_tilde_prefixes;
+
+      bash_tilde_suffixes = strvec_create (3);
+      bash_tilde_suffixes[0] = ":";
+      bash_tilde_suffixes[1] = "=~";	/* XXX - ?? */
+      bash_tilde_suffixes[2] = (char *)NULL;
+
+      tilde_additional_suffixes = bash_tilde_suffixes;
+
+      bash_tilde_suffixes2 = strvec_create (2);
+      bash_tilde_suffixes2[0] = ":";
+      bash_tilde_suffixes2[1] = (char *)NULL;
+    }
+}
+
+/* POSIX.2, 3.6.1:  A tilde-prefix consists of an unquoted tilde character
+   at the beginning of the word, followed by all of the characters preceding
+   the first unquoted slash in the word, or all the characters in the word
+   if there is no slash...If none of the characters in the tilde-prefix are
+   quoted, the characters in the tilde-prefix following the tilde shell be
+   treated as a possible login name. */
+
+#define TILDE_END(c)	((c) == '\0' || (c) == '/' || (c) == ':')
+
+static int
+unquoted_tilde_word (s)
+     const char *s;
+{
+  const char *r;
+
+  for (r = s; TILDE_END(*r) == 0; r++)
+    {
+      switch (*r)
+	{
+	case '\\':
+	case '\'':
+	case '"':
+	  return 0;
+	}
+    }
+  return 1;
+}
+
+/* Find the end of the tilde-prefix starting at S, and return the tilde
+   prefix in newly-allocated memory.  Return the length of the string in
+   *LENP.  FLAGS tells whether or not we're in an assignment context --
+   if so, `:' delimits the end of the tilde prefix as well. */
+char *
+bash_tilde_find_word (s, flags, lenp)
+     const char *s;
+     int flags, *lenp;
+{
+  const char *r;
+  char *ret;
+  int l;
+
+  for (r = s; *r && *r != '/'; r++)
+    {
+      /* Short-circuit immediately if we see a quote character.  Even though
+	 POSIX says that `the first unquoted slash' (or `:') terminates the
+	 tilde-prefix, in practice, any quoted portion of the tilde prefix
+	 will cause it to not be expanded. */
+      if (*r == '\\' || *r == '\'' || *r == '"')  
+	{
+	  ret = savestring (s);
+	  if (lenp)
+	    *lenp = 0;
+	  return ret;
+	}
+      else if (flags && *r == ':')
+	break;
+    }
+  l = r - s;
+  ret = xmalloc (l + 1);
+  strncpy (ret, s, l);
+  ret[l] = '\0';
+  if (lenp)
+    *lenp = l;
+  return ret;
+}
+    
+/* Tilde-expand S by running it through the tilde expansion library.
+   ASSIGN_P is 1 if this is a variable assignment, so the alternate
+   tilde prefixes should be enabled (`=~' and `:~', see above).  If
+   ASSIGN_P is 2, we are expanding the rhs of an assignment statement,
+   so `=~' is not valid. */
+char *
+bash_tilde_expand (s, assign_p)
+     const char *s;
+     int assign_p;
+{
+  int r;
+  char *ret;
+
+  tilde_additional_prefixes = assign_p == 0 ? (char **)0
+  					    : (assign_p == 2 ? bash_tilde_prefixes2 : bash_tilde_prefixes);
+  if (assign_p == 2)
+    tilde_additional_suffixes = bash_tilde_suffixes2;
+
+  r = (*s == '~') ? unquoted_tilde_word (s) : 1;
+  ret = r ? tilde_expand (s) : savestring (s);
+
+  QUIT;
+
+  return (ret);
+}
+
+/* **************************************************************** */
+/*								    */
+/*	  Functions to manipulate and search the group list	    */
+/*								    */
+/* **************************************************************** */
+
+static int ngroups, maxgroups;
+
+/* The set of groups that this user is a member of. */
+static GETGROUPS_T *group_array = (GETGROUPS_T *)NULL;
+
+#if !defined (NOGROUP)
+#  define NOGROUP (gid_t) -1
+#endif
+
+static void
+initialize_group_array ()
+{
+  register int i;
+
+  if (maxgroups == 0)
+    maxgroups = getmaxgroups ();
+
+  ngroups = 0;
+  group_array = (GETGROUPS_T *)xrealloc (group_array, maxgroups * sizeof (GETGROUPS_T));
+
+#if defined (HAVE_GETGROUPS)
+  ngroups = getgroups (maxgroups, group_array);
+#endif
+
+  /* If getgroups returns nothing, or the OS does not support getgroups(),
+     make sure the groups array includes at least the current gid. */
+  if (ngroups == 0)
+    {
+      group_array[0] = current_user.gid;
+      ngroups = 1;
+    }
+
+  /* If the primary group is not in the groups array, add it as group_array[0]
+     and shuffle everything else up 1, if there's room. */
+  for (i = 0; i < ngroups; i++)
+    if (current_user.gid == (gid_t)group_array[i])
+      break;
+  if (i == ngroups && ngroups < maxgroups)
+    {
+      for (i = ngroups; i > 0; i--)
+	group_array[i] = group_array[i - 1];
+      group_array[0] = current_user.gid;
+      ngroups++;
+    }
+
+  /* If the primary group is not group_array[0], swap group_array[0] and
+     whatever the current group is.  The vast majority of systems should
+     not need this; a notable exception is Linux. */
+  if (group_array[0] != current_user.gid)
+    {
+      for (i = 0; i < ngroups; i++)
+	if (group_array[i] == current_user.gid)
+	  break;
+      if (i < ngroups)
+	{
+	  group_array[i] = group_array[0];
+	  group_array[0] = current_user.gid;
+	}
+    }
+}
+
+/* Return non-zero if GID is one that we have in our groups list. */
+int
+#if defined (__STDC__) || defined ( _MINIX)
+group_member (gid_t gid)
+#else
+group_member (gid)
+     gid_t gid;
+#endif /* !__STDC__ && !_MINIX */
+{
+#if defined (HAVE_GETGROUPS)
+  register int i;
+#endif
+
+  /* Short-circuit if possible, maybe saving a call to getgroups(). */
+  if (gid == current_user.gid || gid == current_user.egid)
+    return (1);
+
+#if defined (HAVE_GETGROUPS)
+  if (ngroups == 0)
+    initialize_group_array ();
+
+  /* In case of error, the user loses. */
+  if (ngroups <= 0)
+    return (0);
+
+  /* Search through the list looking for GID. */
+  for (i = 0; i < ngroups; i++)
+    if (gid == (gid_t)group_array[i])
+      return (1);
+#endif
+
+  return (0);
+}
+
+char **
+get_group_list (ngp)
+     int *ngp;
+{
+  static char **group_vector = (char **)NULL;
+  register int i;
+
+  if (group_vector)
+    {
+      if (ngp)
+	*ngp = ngroups;
+      return group_vector;
+    }
+
+  if (ngroups == 0)
+    initialize_group_array ();
+
+  if (ngroups <= 0)
+    {
+      if (ngp)
+	*ngp = 0;
+      return (char **)NULL;
+    }
+
+  group_vector = strvec_create (ngroups);
+  for (i = 0; i < ngroups; i++)
+    group_vector[i] = itos (group_array[i]);
+
+  if (ngp)
+    *ngp = ngroups;
+  return group_vector;
+}
+
+int *
+get_group_array (ngp)
+     int *ngp;
+{
+  int i;
+  static int *group_iarray = (int *)NULL;
+
+  if (group_iarray)
+    {
+      if (ngp)
+	*ngp = ngroups;
+      return (group_iarray);
+    }
+
+  if (ngroups == 0)
+    initialize_group_array ();    
+
+  if (ngroups <= 0)
+    {
+      if (ngp)
+	*ngp = 0;
+      return (int *)NULL;
+    }
+
+  group_iarray = (int *)xmalloc (ngroups * sizeof (int));
+  for (i = 0; i < ngroups; i++)
+    group_iarray[i] = (int)group_array[i];
+
+  if (ngp)
+    *ngp = ngroups;
+  return group_iarray;
+}
+
+/* **************************************************************** */
+/*								    */
+/*	  Miscellaneous functions				    */
+/*								    */
+/* **************************************************************** */
+
+/* Return a value for PATH that is guaranteed to find all of the standard
+   utilities.  This uses Posix.2 configuration variables, if present.  It
+   uses a value defined in config.h as a last resort. */
+char *
+conf_standard_path ()
+{
+#if defined (_CS_PATH) && defined (HAVE_CONFSTR)
+  char *p;
+  size_t len;
+
+  len = (size_t)confstr (_CS_PATH, (char *)NULL, (size_t)0);
+  if (len > 0)
+    {
+      p = (char *)xmalloc (len + 2);
+      *p = '\0';
+      confstr (_CS_PATH, p, len);
+      return (p);
+    }
+  else
+    return (savestring (STANDARD_UTILS_PATH));
+#else /* !_CS_PATH || !HAVE_CONFSTR  */
+#  if defined (CS_PATH)
+  return (savestring (CS_PATH));
+#  else
+  return (savestring (STANDARD_UTILS_PATH));
+#  endif /* !CS_PATH */
+#endif /* !_CS_PATH || !HAVE_CONFSTR */
+}
+
+int
+default_columns ()
+{
+  char *v;
+  int c;
+
+  c = -1;
+  v = get_string_value ("COLUMNS");
+  if (v && *v)
+    {
+      c = atoi (v);
+      if (c > 0)
+	return c;
+    }
+
+  if (check_window_size)
+    get_new_window_size (0, (int *)0, &c);
+
+  return (c > 0 ? c : 80);
+}
+
+  
diff --git a/general.h b/general.h
new file mode 100644
index 0000000..7e4db8e
--- /dev/null
+++ b/general.h
@@ -0,0 +1,371 @@
+/* general.h -- defines that everybody likes to use. */
+
+/* Copyright (C) 1993-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_GENERAL_H_)
+#define _GENERAL_H_
+
+#include "stdc.h"
+
+#include "bashtypes.h"
+#include "chartypes.h"
+
+#if defined (HAVE_SYS_RESOURCE_H) && defined (RLIMTYPE)
+#  if defined (HAVE_SYS_TIME_H)
+#    include <sys/time.h>
+#  endif
+#  include <sys/resource.h>
+#endif
+
+#if defined (HAVE_STRING_H)
+#  include <string.h>
+#else
+#  include <strings.h>
+#endif /* !HAVE_STRING_H */
+
+#if defined (HAVE_LIMITS_H)
+#  include <limits.h>
+#endif
+
+#include "xmalloc.h"
+
+/* NULL pointer type. */
+#if !defined (NULL)
+#  if defined (__STDC__)
+#    define NULL ((void *) 0)
+#  else
+#    define NULL 0x0
+#  endif /* !__STDC__ */
+#endif /* !NULL */
+
+/* Hardly used anymore */
+#define pointer_to_int(x)	(int)((char *)x - (char *)0)
+
+#if defined (alpha) && defined (__GNUC__) && !defined (strchr) && !defined (__STDC__)
+extern char *strchr (), *strrchr ();
+#endif
+
+#if !defined (strcpy) && (defined (HAVE_DECL_STRCPY) && !HAVE_DECL_STRCPY)
+extern char *strcpy PARAMS((char *, const char *));
+#endif
+
+#if !defined (savestring)
+#  define savestring(x) (char *)strcpy (xmalloc (1 + strlen (x)), (x))
+#endif
+
+#ifndef member
+#  define member(c, s) ((c) ? ((char *)mbschr ((s), (c)) != (char *)NULL) : 0)
+#endif
+
+#ifndef whitespace
+#define whitespace(c) (((c) == ' ') || ((c) == '\t'))
+#endif
+
+#ifndef CHAR_MAX
+#  ifdef __CHAR_UNSIGNED__
+#    define CHAR_MAX	0xff
+#  else
+#    define CHAR_MAX	0x7f
+#  endif
+#endif
+
+#ifndef CHAR_BIT
+#  define CHAR_BIT 8
+#endif
+
+/* Nonzero if the integer type T is signed.  */
+#define TYPE_SIGNED(t) (! ((t) 0 < (t) -1))
+
+/* The width in bits of the integer type or expression T.
+   Padding bits are not supported; this is checked at compile-time below.  */
+#define TYPE_WIDTH(t) (sizeof (t) * CHAR_BIT)
+
+/* Bound on length of the string representing an unsigned integer
+   value representable in B bits.  log10 (2.0) < 146/485.  The
+      smallest value of B where this bound is not tight is 2621.  */
+#define INT_BITS_STRLEN_BOUND(b) (((b) * 146 + 484) / 485)
+
+/* Bound on length of the string representing an integer value of type T.
+   Subtract one for the sign bit if T is signed;
+   302 / 1000 is log10 (2) rounded up;
+   add one for integer division truncation;
+   add one more for a minus sign if t is signed.  */
+#define INT_STRLEN_BOUND(t) \
+  ((TYPE_WIDTH (t) - TYPE_SIGNED (t)) * 302 / 1000 \
+   + 1 + TYPE_SIGNED (t))
+
+/* Updated version adapted from gnulib/intprops.h, not used right now.
+   Changes the approximation of log10(2) from 302/1000 to 146/485. */
+#if 0
+#define INT_STRLEN_BOUND(t) \
+  (INT_BITS_STRLEN_BOUND (TYPE_WIDTH (t) - TYPE_SIGNED (t)) + TYPE_SIGNED(t))
+#endif
+
+/* Bound on buffer size needed to represent an integer type or expression T,
+   including the terminating null.  */
+#define INT_BUFSIZE_BOUND(t) (INT_STRLEN_BOUND (t) + 1)
+
+/* Define exactly what a legal shell identifier consists of. */
+#define legal_variable_starter(c) (ISALPHA(c) || (c == '_'))
+#define legal_variable_char(c)	(ISALNUM(c) || c == '_')
+
+/* Definitions used in subst.c and by the `read' builtin for field
+   splitting. */
+#define spctabnl(c)	((c) == ' ' || (c) == '\t' || (c) == '\n')
+
+/* All structs which contain a `next' field should have that field
+   as the first field in the struct.  This means that functions
+   can be written to handle the general case for linked lists. */
+typedef struct g_list {
+  struct g_list *next;
+} GENERIC_LIST;
+
+/* Here is a generic structure for associating character strings
+   with integers.  It is used in the parser for shell tokenization. */
+typedef struct {
+  char *word;
+  int token;
+} STRING_INT_ALIST;
+
+/* A macro to avoid making an unnecessary function call. */
+#define REVERSE_LIST(list, type) \
+  ((list && list->next) ? (type)list_reverse ((GENERIC_LIST *)list) \
+			: (type)(list))
+
+#if __GNUC__ > 1
+#  define FASTCOPY(s, d, n)  __builtin_memcpy ((d), (s), (n))
+#else /* !__GNUC__ */
+#  if !defined (HAVE_BCOPY)
+#    if !defined (HAVE_MEMMOVE)
+#      define FASTCOPY(s, d, n)  memcpy ((d), (s), (n))
+#    else
+#      define FASTCOPY(s, d, n)  memmove ((d), (s), (n))
+#    endif /* !HAVE_MEMMOVE */
+#  else /* HAVE_BCOPY */
+#    define FASTCOPY(s, d, n)  bcopy ((s), (d), (n))
+#  endif /* HAVE_BCOPY */
+#endif /* !__GNUC__ */
+
+/* String comparisons that possibly save a function call each. */
+#define STREQ(a, b) ((a)[0] == (b)[0] && strcmp(a, b) == 0)
+#define STREQN(a, b, n) ((n == 0) ? (1) \
+				  : ((a)[0] == (b)[0] && strncmp(a, b, n) == 0))
+
+/* More convenience definitions that possibly save system or libc calls. */
+#define STRLEN(s) (((s) && (s)[0]) ? ((s)[1] ? ((s)[2] ? strlen(s) : 2) : 1) : 0)
+#define FREE(s)  do { if (s) free (s); } while (0)
+#define MEMBER(c, s) (((c) && c == (s)[0] && !(s)[1]) || (member(c, s)))
+
+/* A fairly hairy macro to check whether an allocated string has more room,
+   and to resize it using xrealloc if it does not.
+   STR is the string (char *)
+   CIND is the current index into the string (int)
+   ROOM is the amount of additional room we need in the string (int)
+   CSIZE is the currently-allocated size of STR (int)
+   SINCR is how much to increment CSIZE before calling xrealloc (int) */
+
+#define RESIZE_MALLOCED_BUFFER(str, cind, room, csize, sincr) \
+  do { \
+    if ((cind) + (room) >= csize) \
+      { \
+	while ((cind) + (room) >= csize) \
+	  csize += (sincr); \
+	str = xrealloc (str, csize); \
+      } \
+  } while (0)
+
+/* Function pointers can be declared as (Function *)foo. */
+#if !defined (_FUNCTION_DEF)
+#  define _FUNCTION_DEF
+typedef int Function ();
+typedef void VFunction ();
+typedef char *CPFunction ();		/* no longer used */
+typedef char **CPPFunction ();		/* no longer used */
+#endif /* _FUNCTION_DEF */
+
+#ifndef SH_FUNCTION_TYPEDEF
+#  define SH_FUNCTION_TYPEDEF
+
+/* Shell function typedefs with prototypes */
+/* `Generic' function pointer typedefs */
+
+typedef int sh_intfunc_t PARAMS((int));
+typedef int sh_ivoidfunc_t PARAMS((void));
+typedef int sh_icpfunc_t PARAMS((char *));
+typedef int sh_icppfunc_t PARAMS((char **));
+typedef int sh_iptrfunc_t PARAMS((PTR_T));
+
+typedef void sh_voidfunc_t PARAMS((void));
+typedef void sh_vintfunc_t PARAMS((int));
+typedef void sh_vcpfunc_t PARAMS((char *));
+typedef void sh_vcppfunc_t PARAMS((char **));
+typedef void sh_vptrfunc_t PARAMS((PTR_T));
+
+typedef int sh_wdesc_func_t PARAMS((WORD_DESC *));
+typedef int sh_wlist_func_t PARAMS((WORD_LIST *));
+
+typedef int sh_glist_func_t PARAMS((GENERIC_LIST *));
+
+typedef char *sh_string_func_t PARAMS((char *));	/* like savestring, et al. */
+
+typedef int sh_msg_func_t PARAMS((const char *, ...));	/* printf(3)-like */
+typedef void sh_vmsg_func_t PARAMS((const char *, ...));	/* printf(3)-like */
+
+/* Specific function pointer typedefs.  Most of these could be done
+   with #defines. */
+typedef void sh_sv_func_t PARAMS((char *));	/* sh_vcpfunc_t */
+typedef void sh_free_func_t PARAMS((PTR_T));	/* sh_vptrfunc_t */
+typedef void sh_resetsig_func_t PARAMS((int));	/* sh_vintfunc_t */
+
+typedef int sh_ignore_func_t PARAMS((const char *));	/* sh_icpfunc_t */
+
+typedef int sh_assign_func_t PARAMS((const char *));
+typedef int sh_wassign_func_t PARAMS((WORD_DESC *, int));
+
+typedef int sh_load_func_t PARAMS((char *));
+typedef void sh_unload_func_t PARAMS((char *));
+
+typedef int sh_builtin_func_t PARAMS((WORD_LIST *)); /* sh_wlist_func_t */
+
+#endif /* SH_FUNCTION_TYPEDEF */
+
+#define NOW	((time_t) time ((time_t *) 0))
+#define GETTIME(tv)	gettimeofday(&(tv), NULL)
+
+/* Some defines for calling file status functions. */
+#define FS_EXISTS	  0x1
+#define FS_EXECABLE	  0x2
+#define FS_EXEC_PREFERRED 0x4
+#define FS_EXEC_ONLY	  0x8
+#define FS_DIRECTORY	  0x10
+#define FS_NODIRS	  0x20
+#define FS_READABLE	  0x40
+
+/* Default maximum for move_to_high_fd */
+#define HIGH_FD_MAX	256
+
+/* The type of function passed as the fourth argument to qsort(3). */
+#ifdef __STDC__
+typedef int QSFUNC (const void *, const void *);
+#else
+typedef int QSFUNC ();
+#endif 
+
+/* Some useful definitions for Unix pathnames.  Argument convention:
+   x == string, c == character */
+
+#if !defined (__CYGWIN__)
+#  define ABSPATH(x)	((x)[0] == '/')
+#  define RELPATH(x)	((x)[0] != '/')
+#else /* __CYGWIN__ */
+#  define ABSPATH(x)	(((x)[0] && ISALPHA((unsigned char)(x)[0]) && (x)[1] == ':') || ISDIRSEP((x)[0]))
+#  define RELPATH(x)	(ABSPATH(x) == 0)
+#endif /* __CYGWIN__ */
+
+#define ROOTEDPATH(x)	(ABSPATH(x))
+
+#define DIRSEP	'/'
+#if !defined (__CYGWIN__)
+#  define ISDIRSEP(c)	((c) == '/')
+#else
+#  define ISDIRSEP(c)	((c) == '/' || (c) == '\\')
+#endif /* __CYGWIN__ */
+#define PATHSEP(c)	(ISDIRSEP(c) || (c) == 0)
+
+#define DOT_OR_DOTDOT(s)	(s[0] == '.' && (s[1] == 0 || (s[1] == '.' && s[2] == 0)))
+#if defined (HANDLE_MULTIBYTE)
+#define WDOT_OR_DOTDOT(w)	(w[0] == L'.' && (w[1] == L'\0' || (w[1] == L'.' && w[2] == L'\0')))
+#endif
+
+#if 0
+/* Declarations for functions defined in xmalloc.c */
+extern PTR_T xmalloc PARAMS((size_t));
+extern PTR_T xrealloc PARAMS((void *, size_t));
+extern void xfree PARAMS((void *));
+#endif
+
+/* Declarations for functions defined in general.c */
+extern void posix_initialize PARAMS((int));
+
+extern int num_posix_options PARAMS((void));
+extern char *get_posix_options PARAMS((char *));
+extern void set_posix_options PARAMS((const char *));
+
+extern void save_posix_options PARAMS((void));
+
+#if defined (RLIMTYPE)
+extern RLIMTYPE string_to_rlimtype PARAMS((char *));
+extern void print_rlimtype PARAMS((RLIMTYPE, int));
+#endif
+
+extern int all_digits PARAMS((const char *));
+extern int legal_number PARAMS((const char *, intmax_t *));
+extern int legal_identifier PARAMS((const char *));
+extern int importable_function_name PARAMS((const char *, size_t));
+extern int exportable_function_name PARAMS((const char *));
+extern int check_identifier PARAMS((WORD_DESC *, int));
+extern int valid_nameref_value PARAMS((const char *, int));
+extern int check_selfref PARAMS((const char *, char *, int));
+extern int legal_alias_name PARAMS((const char *, int));
+extern int line_isblank PARAMS((const char *));
+extern int assignment PARAMS((const char *, int));
+
+extern int sh_unset_nodelay_mode PARAMS((int));
+extern int sh_setclexec PARAMS((int));
+extern int sh_validfd PARAMS((int));
+extern int fd_ispipe PARAMS((int));
+extern void check_dev_tty PARAMS((void));
+extern int move_to_high_fd PARAMS((int, int, int));
+extern int check_binary_file PARAMS((const char *, int));
+
+#ifdef _POSIXSTAT_H_
+extern int same_file PARAMS((const char *, const char *, struct stat *, struct stat *));
+#endif
+
+extern int sh_openpipe PARAMS((int *));
+extern int sh_closepipe PARAMS((int *));
+
+extern int file_exists PARAMS((const char *));
+extern int file_isdir PARAMS((const char  *));
+extern int file_iswdir PARAMS((const char  *));
+extern int path_dot_or_dotdot PARAMS((const char *));
+extern int absolute_pathname PARAMS((const char *));
+extern int absolute_program PARAMS((const char *));
+
+extern char *make_absolute PARAMS((const char *, const char *));
+extern char *base_pathname PARAMS((char *));
+extern char *full_pathname PARAMS((char *));
+extern char *polite_directory_format PARAMS((char *));
+extern char *trim_pathname PARAMS((char *, int));
+extern char *printable_filename PARAMS((char *, int));
+
+extern char *extract_colon_unit PARAMS((char *, int *));
+
+extern void tilde_initialize PARAMS((void));
+extern char *bash_tilde_find_word PARAMS((const char *, int, int *));
+extern char *bash_tilde_expand PARAMS((const char *, int));
+
+extern int group_member PARAMS((gid_t));
+extern char **get_group_list PARAMS((int *));
+extern int *get_group_array PARAMS((int *));
+
+extern char *conf_standard_path PARAMS((void));
+extern int default_columns PARAMS((void));
+
+#endif	/* _GENERAL_H_ */
diff --git a/hashcmd.c b/hashcmd.c
new file mode 100644
index 0000000..da3af00
--- /dev/null
+++ b/hashcmd.c
@@ -0,0 +1,195 @@
+/* hashcmd.c - functions for managing a hash table mapping command names to
+	       full pathnames. */
+
+/* Copyright (C) 1997-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#include "bashtypes.h"
+#include "posixstat.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "bashansi.h"
+
+#include "shell.h"
+#include "flags.h"
+#include "findcmd.h"
+#include "hashcmd.h"
+
+HASH_TABLE *hashed_filenames = (HASH_TABLE *)NULL;
+
+static void phash_freedata PARAMS((PTR_T));
+
+void
+phash_create ()
+{
+  if (hashed_filenames == 0)
+    hashed_filenames = hash_create (FILENAME_HASH_BUCKETS);
+}
+
+static void
+phash_freedata (data)
+     PTR_T data;
+{
+  free (((PATH_DATA *)data)->path);
+  free (data);
+}
+
+void
+phash_flush ()
+{
+  if (hashed_filenames)
+    hash_flush (hashed_filenames, phash_freedata);
+}
+
+/* Remove FILENAME from the table of hashed commands. */
+int
+phash_remove (filename)
+     const char *filename;
+{
+  register BUCKET_CONTENTS *item;
+
+  if (hashing_enabled == 0 || hashed_filenames == 0)
+    return 0;
+
+  item = hash_remove (filename, hashed_filenames, 0);
+  if (item)
+    {
+      if (item->data)
+	phash_freedata (item->data);
+      free (item->key);
+      free (item);
+      return 0;
+    }
+  return 1;
+}
+
+/* Place FILENAME (key) and FULL_PATH (data->path) into the
+   hash table.  CHECK_DOT if non-null is for future calls to
+   phash_search (); it means that this file was found
+   in a directory in $PATH that is not an absolute pathname.
+   FOUND is the initial value for times_found. */
+void
+phash_insert (filename, full_path, check_dot, found)
+     char *filename, *full_path;
+     int check_dot, found;
+{
+  register BUCKET_CONTENTS *item;
+
+  if (hashing_enabled == 0)
+    return;
+
+  if (hashed_filenames == 0)
+    phash_create ();
+
+  item = hash_insert (filename, hashed_filenames, 0);
+  if (item->data)
+    free (pathdata(item)->path);
+  else
+    {
+      item->key = savestring (filename);
+      item->data = xmalloc (sizeof (PATH_DATA));
+    }
+  pathdata(item)->path = savestring (full_path);
+  pathdata(item)->flags = 0;
+  if (check_dot)
+    pathdata(item)->flags |= HASH_CHKDOT;
+  if (*full_path != '/')
+    pathdata(item)->flags |= HASH_RELPATH;
+  item->times_found = found;
+}
+
+/* Return the full pathname that FILENAME hashes to.  If FILENAME
+   is hashed, but (data->flags & HASH_CHKDOT) is non-zero, check
+   ./FILENAME and return that if it is executable.  This always
+   returns a newly-allocated string; the caller is responsible
+   for freeing it. */
+char *
+phash_search (filename)
+     const char *filename;
+{
+  register BUCKET_CONTENTS *item;
+  char *path, *dotted_filename, *tail;
+  int same;
+
+  if (hashing_enabled == 0 || hashed_filenames == 0)
+    return ((char *)NULL);
+
+  item = hash_search (filename, hashed_filenames, 0);
+
+  if (item == NULL)
+    return ((char *)NULL);
+
+  /* If this filename is hashed, but `.' comes before it in the path,
+     see if ./filename is executable.  If the hashed value is not an
+     absolute pathname, see if ./`hashed-value' exists. */
+  path = pathdata(item)->path;
+  if (pathdata(item)->flags & (HASH_CHKDOT|HASH_RELPATH))
+    {
+      tail = (pathdata(item)->flags & HASH_RELPATH) ? path : (char *)filename;	/* XXX - fix const later */
+      /* If the pathname does not start with a `./', add a `./' to it. */
+      if (tail[0] != '.' || tail[1] != '/')
+	{
+	  dotted_filename = (char *)xmalloc (3 + strlen (tail));
+	  dotted_filename[0] = '.'; dotted_filename[1] = '/';
+	  strcpy (dotted_filename + 2, tail);
+	}
+      else
+	dotted_filename = savestring (tail);
+
+      if (executable_file (dotted_filename))
+	return (dotted_filename);
+
+      free (dotted_filename);
+
+#if 0
+      if (pathdata(item)->flags & HASH_RELPATH)
+	return ((char *)NULL);
+#endif
+
+      /* Watch out.  If this file was hashed to "./filename", and
+	 "./filename" is not executable, then return NULL. */
+
+      /* Since we already know "./filename" is not executable, what
+	 we're really interested in is whether or not the `path'
+	 portion of the hashed filename is equivalent to the current
+	 directory, but only if it starts with a `.'.  (This catches
+	 ./. and so on.)  same_file () tests general Unix file
+	 equivalence -- same device and inode. */
+      if (*path == '.')
+	{
+	  same = 0;
+	  tail = (char *)strrchr (path, '/');
+
+	  if (tail)
+	    {
+	      *tail = '\0';
+	      same = same_file (".", path, (struct stat *)NULL, (struct stat *)NULL);
+	      *tail = '/';
+	    }
+
+	  return same ? (char *)NULL : savestring (path);
+	}
+    }
+
+  return (savestring (path));
+}
diff --git a/hashcmd.h b/hashcmd.h
new file mode 100644
index 0000000..2459f20
--- /dev/null
+++ b/hashcmd.h
@@ -0,0 +1,43 @@
+/* hashcmd.h - Common defines for hashing filenames. */
+
+/* Copyright (C) 1993-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "stdc.h"
+#include "hashlib.h"
+
+#define FILENAME_HASH_BUCKETS 256	/* must be power of two */
+
+extern HASH_TABLE *hashed_filenames;
+
+typedef struct _pathdata {
+  char *path;		/* The full pathname of the file. */
+  int flags;
+} PATH_DATA;
+
+#define HASH_RELPATH	0x01	/* this filename is a relative pathname. */
+#define HASH_CHKDOT	0x02	/* check `.' since it was earlier in $PATH */
+
+#define pathdata(x) ((PATH_DATA *)(x)->data)
+
+extern void phash_create PARAMS((void));
+extern void phash_flush PARAMS((void));
+
+extern void phash_insert PARAMS((char *, char *, int, int));
+extern int phash_remove PARAMS((const char *));
+extern char *phash_search PARAMS((const char *));
diff --git a/hashlib.c b/hashlib.c
new file mode 100644
index 0000000..4a7e813
--- /dev/null
+++ b/hashlib.c
@@ -0,0 +1,545 @@
+/* hashlib.c -- functions to manage and access hash tables for bash. */
+
+/* Copyright (C) 1987,1989,1991,1995,1998,2001,2003,2005,2006,2008,2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#include "bashansi.h"
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+
+#include "shell.h"
+#include "hashlib.h"
+
+/* tunable constants for rehashing */
+#define HASH_REHASH_MULTIPLIER	4
+#define HASH_REHASH_FACTOR	2
+
+#define HASH_SHOULDGROW(table) \
+  ((table)->nentries >= (table)->nbuckets * HASH_REHASH_FACTOR)
+
+/* an initial approximation */
+#define HASH_SHOULDSHRINK(table) \
+  (((table)->nbuckets > DEFAULT_HASH_BUCKETS) && \
+   ((table)->nentries < (table)->nbuckets / HASH_REHASH_MULTIPLIER))
+
+/* Rely on properties of unsigned division (unsigned/int -> unsigned) and
+   don't discard the upper 32 bits of the value, if present. */
+#define HASH_BUCKET(s, t, h) (((h) = hash_string (s)) & ((t)->nbuckets - 1))
+
+static BUCKET_CONTENTS *copy_bucket_array PARAMS((BUCKET_CONTENTS *, sh_string_func_t *));
+
+static void hash_rehash PARAMS((HASH_TABLE *, int));
+static void hash_grow PARAMS((HASH_TABLE *));
+static void hash_shrink PARAMS((HASH_TABLE *));
+
+/* Make a new hash table with BUCKETS number of buckets.  Initialize
+   each slot in the table to NULL. */
+HASH_TABLE *
+hash_create (buckets)
+     int buckets;
+{
+  HASH_TABLE *new_table;
+  register int i;
+
+  new_table = (HASH_TABLE *)xmalloc (sizeof (HASH_TABLE));
+  if (buckets == 0)
+    buckets = DEFAULT_HASH_BUCKETS;
+
+  new_table->bucket_array =
+    (BUCKET_CONTENTS **)xmalloc (buckets * sizeof (BUCKET_CONTENTS *));
+  new_table->nbuckets = buckets;
+  new_table->nentries = 0;
+
+  for (i = 0; i < buckets; i++)
+    new_table->bucket_array[i] = (BUCKET_CONTENTS *)NULL;
+
+  return (new_table);
+}
+
+int
+hash_size (table)
+     HASH_TABLE *table;
+{
+  return (HASH_ENTRIES(table));
+}
+
+static BUCKET_CONTENTS *
+copy_bucket_array (ba, cpdata)
+     BUCKET_CONTENTS *ba;
+     sh_string_func_t *cpdata;	/* data copy function */
+{
+  BUCKET_CONTENTS *new_bucket, *n, *e;
+
+  if (ba == 0)
+    return ((BUCKET_CONTENTS *)0);
+
+  for (n = (BUCKET_CONTENTS *)0, e = ba; e; e = e->next)
+    {
+      if (n == 0)
+        {
+          new_bucket = (BUCKET_CONTENTS *)xmalloc (sizeof (BUCKET_CONTENTS));
+          n = new_bucket;
+        }
+      else
+        {
+          n->next = (BUCKET_CONTENTS *)xmalloc (sizeof (BUCKET_CONTENTS));
+          n = n->next;
+        }
+
+      n->key = savestring (e->key);
+      n->data = e->data ? (cpdata ? (*cpdata) (e->data) : savestring (e->data))
+			: NULL;
+      n->khash = e->khash;
+      n->times_found = e->times_found;
+      n->next = (BUCKET_CONTENTS *)NULL;
+    }
+
+  return new_bucket;  
+}
+
+static void
+hash_rehash (table, nsize)
+     HASH_TABLE *table;
+     int nsize;
+{
+  int osize, i, j;
+  BUCKET_CONTENTS **old_bucket_array, *item, *next;
+
+  if (table == NULL || nsize == table->nbuckets)
+    return;
+
+  osize = table->nbuckets;
+  old_bucket_array = table->bucket_array;
+
+  table->nbuckets = nsize;
+  table->bucket_array = (BUCKET_CONTENTS **)xmalloc (table->nbuckets * sizeof (BUCKET_CONTENTS *));
+  for (i = 0; i < table->nbuckets; i++)
+    table->bucket_array[i] = (BUCKET_CONTENTS *)NULL;
+
+  for (j = 0; j < osize; j++)
+    {
+      for (item = old_bucket_array[j]; item; item = next)
+	{
+	  next = item->next;
+	  i = item->khash & (table->nbuckets - 1);
+	  item->next = table->bucket_array[i];
+	  table->bucket_array[i] = item;
+	}
+    }
+
+  free (old_bucket_array);
+}
+
+static void
+hash_grow (table)
+     HASH_TABLE *table;
+{
+  int nsize;
+
+  nsize = table->nbuckets * HASH_REHASH_MULTIPLIER;
+  if (nsize > 0)		/* overflow */
+    hash_rehash (table, nsize);
+}
+
+static void
+hash_shrink (table)
+     HASH_TABLE *table;
+{
+  int nsize;
+
+  nsize = table->nbuckets / HASH_REHASH_MULTIPLIER;
+  hash_rehash (table, nsize);
+}
+
+HASH_TABLE *
+hash_copy (table, cpdata)
+     HASH_TABLE *table;
+     sh_string_func_t *cpdata;
+{
+  HASH_TABLE *new_table;
+  int i;
+
+  if (table == 0)
+    return ((HASH_TABLE *)NULL);
+
+  new_table = hash_create (table->nbuckets);
+
+  for (i = 0; i < table->nbuckets; i++)
+    new_table->bucket_array[i] = copy_bucket_array (table->bucket_array[i], cpdata);
+
+  new_table->nentries = table->nentries;
+  return new_table;
+}
+
+/* This is the best 32-bit string hash function I found. It's one of the
+   Fowler-Noll-Vo family (FNV-1).
+
+   The magic is in the interesting relationship between the special prime
+   16777619 (2^24 + 403) and 2^32 and 2^8. */
+
+#define FNV_OFFSET 2166136261
+#define FNV_PRIME 16777619
+
+/* If you want to use 64 bits, use
+FNV_OFFSET	14695981039346656037
+FNV_PRIME	1099511628211
+*/
+
+/* The `khash' check below requires that strings that compare equally with
+   strcmp hash to the same value. */
+unsigned int
+hash_string (s)
+     const char *s;
+{
+  register unsigned int i;
+
+  for (i = FNV_OFFSET; *s; s++)
+    {
+      /* FNV-1a has the XOR first, traditional FNV-1 has the multiply first */
+
+      /* was i *= FNV_PRIME */
+      i += (i<<1) + (i<<4) + (i<<7) + (i<<8) + (i<<24);
+      i ^= *s;
+    }
+
+  return i;
+}
+
+/* Return the location of the bucket which should contain the data
+   for STRING.  TABLE is a pointer to a HASH_TABLE. */
+
+int
+hash_bucket (string, table)
+     const char *string;
+     HASH_TABLE *table;
+{
+  unsigned int h;
+
+  return (HASH_BUCKET (string, table, h));
+}
+
+/* Return a pointer to the hashed item.  If the HASH_CREATE flag is passed,
+   create a new hash table entry for STRING, otherwise return NULL. */
+BUCKET_CONTENTS *
+hash_search (string, table, flags)
+     const char *string;
+     HASH_TABLE *table;
+     int flags;
+{
+  BUCKET_CONTENTS *list;
+  int bucket;
+  unsigned int hv;
+
+  if (table == 0 || ((flags & HASH_CREATE) == 0 && HASH_ENTRIES (table) == 0))
+    return (BUCKET_CONTENTS *)NULL;
+
+  bucket = HASH_BUCKET (string, table, hv);
+
+  for (list = table->bucket_array ? table->bucket_array[bucket] : 0; list; list = list->next)
+    {
+      /* This is the comparison function */
+      if (hv == list->khash && STREQ (list->key, string))
+	{
+	  list->times_found++;
+	  return (list);
+	}
+    }
+
+  if (flags & HASH_CREATE)
+    {
+      if (HASH_SHOULDGROW (table))
+	{
+	  hash_grow (table);
+	  bucket = HASH_BUCKET (string, table, hv);
+	}
+
+      list = (BUCKET_CONTENTS *)xmalloc (sizeof (BUCKET_CONTENTS));
+      list->next = table->bucket_array[bucket];
+      table->bucket_array[bucket] = list;
+
+      list->data = NULL;
+      list->key = (char *)string;	/* XXX fix later */
+      list->khash = hv;
+      list->times_found = 0;
+
+      table->nentries++;
+      return (list);
+    }
+      
+  return (BUCKET_CONTENTS *)NULL;
+}
+
+/* Remove the item specified by STRING from the hash table TABLE.
+   The item removed is returned, so you can free its contents.  If
+   the item isn't in this table NULL is returned. */
+BUCKET_CONTENTS *
+hash_remove (string, table, flags)
+     const char *string;
+     HASH_TABLE *table;
+     int flags;
+{
+  int bucket;
+  BUCKET_CONTENTS *prev, *temp;
+  unsigned int hv;
+
+  if (table == 0 || HASH_ENTRIES (table) == 0)
+    return (BUCKET_CONTENTS *)NULL;
+
+  bucket = HASH_BUCKET (string, table, hv);
+  prev = (BUCKET_CONTENTS *)NULL;
+  for (temp = table->bucket_array[bucket]; temp; temp = temp->next)
+    {
+      if (hv == temp->khash && STREQ (temp->key, string))
+	{
+	  if (prev)
+	    prev->next = temp->next;
+	  else
+	    table->bucket_array[bucket] = temp->next;
+
+	  table->nentries--;
+	  return (temp);
+	}
+      prev = temp;
+    }
+  return ((BUCKET_CONTENTS *) NULL);
+}
+
+/* Create an entry for STRING, in TABLE.  If the entry already
+   exists, then return it (unless the HASH_NOSRCH flag is set). */
+BUCKET_CONTENTS *
+hash_insert (string, table, flags)
+     char *string;
+     HASH_TABLE *table;
+     int flags;
+{
+  BUCKET_CONTENTS *item;
+  int bucket;
+  unsigned int hv;
+
+  if (table == 0)
+    table = hash_create (0);
+
+  item = (flags & HASH_NOSRCH) ? (BUCKET_CONTENTS *)NULL
+  			       : hash_search (string, table, 0);
+
+  if (item == 0)
+    {
+      if (HASH_SHOULDGROW (table))
+	hash_grow (table);
+
+      bucket = HASH_BUCKET (string, table, hv);
+
+      item = (BUCKET_CONTENTS *)xmalloc (sizeof (BUCKET_CONTENTS));
+      item->next = table->bucket_array[bucket];
+      table->bucket_array[bucket] = item;
+
+      item->data = NULL;
+      item->key = string;
+      item->khash = hv;
+      item->times_found = 0;
+
+      table->nentries++;
+    }
+
+  return (item);
+}
+
+/* Remove and discard all entries in TABLE.  If FREE_DATA is non-null, it
+   is a function to call to dispose of a hash item's data.  Otherwise,
+   free() is called. */
+void
+hash_flush (table, free_data)
+     HASH_TABLE *table;
+     sh_free_func_t *free_data;
+{
+  int i;
+  register BUCKET_CONTENTS *bucket, *item;
+
+  if (table == 0 || HASH_ENTRIES (table) == 0)
+    return;
+
+  for (i = 0; i < table->nbuckets; i++)
+    {
+      bucket = table->bucket_array[i];
+
+      while (bucket)
+	{
+	  item = bucket;
+	  bucket = bucket->next;
+
+	  if (free_data)
+	    (*free_data) (item->data);
+	  else
+	    free (item->data);
+	  free (item->key);
+	  free (item);
+	}
+      table->bucket_array[i] = (BUCKET_CONTENTS *)NULL;
+    }
+
+  table->nentries = 0;
+}
+
+/* Free the hash table pointed to by TABLE. */
+void
+hash_dispose (table)
+     HASH_TABLE *table;
+{
+  free (table->bucket_array);
+  free (table);
+}
+
+void
+hash_walk (table, func)
+     HASH_TABLE *table;
+     hash_wfunc *func;
+{
+  register int i;
+  BUCKET_CONTENTS *item;
+
+  if (table == 0 || HASH_ENTRIES (table) == 0)
+    return;
+
+  for (i = 0; i < table->nbuckets; i++)
+    {
+      for (item = hash_items (i, table); item; item = item->next)
+	if ((*func) (item) < 0)
+	  return;
+    }
+}
+
+#if defined (DEBUG) || defined (TEST_HASHING)
+void
+hash_pstats (table, name)
+     HASH_TABLE *table;
+     char *name;
+{
+  register int slot, bcount;
+  register BUCKET_CONTENTS *bc;
+
+  if (name == 0)
+    name = "unknown hash table";
+
+  fprintf (stderr, "%s: %d buckets; %d items\n", name, table->nbuckets, table->nentries);
+
+  /* Print out a count of how many strings hashed to each bucket, so we can
+     see how even the distribution is. */
+  for (slot = 0; slot < table->nbuckets; slot++)
+    {
+      bc = hash_items (slot, table);
+
+      fprintf (stderr, "\tslot %3d: ", slot);
+      for (bcount = 0; bc; bc = bc->next)
+	bcount++;
+
+      fprintf (stderr, "%d\n", bcount);
+    }
+}
+#endif
+
+#ifdef TEST_HASHING
+
+/* link with xmalloc.o and lib/malloc/libmalloc.a */
+#undef NULL
+#include <stdio.h>
+
+#ifndef NULL
+#define NULL 0
+#endif
+
+HASH_TABLE *table, *ntable;
+
+int interrupt_immediately = 0;
+int running_trap = 0;
+
+int
+signal_is_trapped (s)
+     int s;
+{
+  return (0);
+}
+
+void
+programming_error (const char *format, ...)
+{
+  abort();
+}
+
+void
+fatal_error (const char *format, ...)
+{
+  abort();
+}
+
+void
+internal_warning (const char *format, ...)
+{
+}
+
+int
+main ()
+{
+  char string[256];
+  int count = 0;
+  BUCKET_CONTENTS *tt;
+
+#if defined (TEST_NBUCKETS)
+  table = hash_create (TEST_NBUCKETS);
+#else
+  table = hash_create (0);
+#endif
+
+  for (;;)
+    {
+      char *temp_string;
+      if (fgets (string, sizeof (string), stdin) == 0)
+	break;
+      if (!*string)
+	break;
+      temp_string = savestring (string);
+      tt = hash_insert (temp_string, table, 0);
+      if (tt->times_found)
+	{
+	  fprintf (stderr, "You have already added item `%s'\n", string);
+	  free (temp_string);
+	}
+      else
+	{
+	  count++;
+	}
+    }
+
+  hash_pstats (table, "hash test");
+
+  ntable = hash_copy (table, (sh_string_func_t *)NULL);
+  hash_flush (table, (sh_free_func_t *)NULL);
+  hash_pstats (ntable, "hash copy test");
+
+  exit (0);
+}
+
+#endif /* TEST_HASHING */
diff --git a/hashlib.h b/hashlib.h
new file mode 100644
index 0000000..cf2de98
--- /dev/null
+++ b/hashlib.h
@@ -0,0 +1,92 @@
+/* hashlib.h -- the data structures used in hashing in Bash. */
+
+/* Copyright (C) 1993-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_HASHLIB_H_)
+#define _HASHLIB_H_
+
+#include "stdc.h"
+
+#ifndef PTR_T
+#  ifdef __STDC__
+#    define PTR_T void *
+#  else
+#    define PTR_T char *
+#  endif
+#endif
+
+typedef struct bucket_contents {
+  struct bucket_contents *next;	/* Link to next hashed key in this bucket. */
+  char *key;			/* What we look up. */
+  PTR_T data;			/* What we really want. */
+  unsigned int khash;		/* What key hashes to */
+  int times_found;		/* Number of times this item has been found. */
+} BUCKET_CONTENTS;
+
+typedef struct hash_table {
+  BUCKET_CONTENTS **bucket_array;	/* Where the data is kept. */
+  int nbuckets;			/* How many buckets does this table have. */
+  int nentries;			/* How many entries does this table have. */
+} HASH_TABLE;
+
+typedef int hash_wfunc PARAMS((BUCKET_CONTENTS *));
+
+/* Operations on tables as a whole */
+extern HASH_TABLE *hash_create PARAMS((int));
+extern HASH_TABLE *hash_copy PARAMS((HASH_TABLE *, sh_string_func_t *));
+extern void hash_flush PARAMS((HASH_TABLE *, sh_free_func_t *));
+extern void hash_dispose PARAMS((HASH_TABLE *));
+extern void hash_walk PARAMS((HASH_TABLE *, hash_wfunc *));
+
+/* Operations to extract information from or pieces of tables */
+extern int hash_bucket PARAMS((const char *, HASH_TABLE *));
+extern int hash_size PARAMS((HASH_TABLE *));
+
+/* Operations on hash table entries */
+extern BUCKET_CONTENTS *hash_search PARAMS((const char *, HASH_TABLE *, int));
+extern BUCKET_CONTENTS *hash_insert PARAMS((char *, HASH_TABLE *, int));
+extern BUCKET_CONTENTS *hash_remove PARAMS((const char *, HASH_TABLE *, int));
+
+/* Miscellaneous */
+extern unsigned int hash_string PARAMS((const char *));
+
+/* Redefine the function as a macro for speed. */
+#define hash_items(bucket, table) \
+	((table && (bucket < table->nbuckets)) ?  \
+		table->bucket_array[bucket] : \
+		(BUCKET_CONTENTS *)NULL)
+
+/* Default number of buckets in the hash table. */
+#define DEFAULT_HASH_BUCKETS 128	/* must be power of two */
+
+#define HASH_ENTRIES(ht)	((ht) ? (ht)->nentries : 0)
+
+/* flags for hash_search and hash_insert */
+#define HASH_NOSRCH	0x01
+#define HASH_CREATE	0x02
+
+#if !defined (NULL)
+#  if defined (__STDC__)
+#    define NULL ((void *) 0)
+#  else
+#    define NULL 0x0
+#  endif /* !__STDC__ */
+#endif /* !NULL */
+
+#endif /* _HASHLIB_H */
diff --git a/include/ansi_stdlib.h b/include/ansi_stdlib.h
new file mode 100644
index 0000000..7dc2ee0
--- /dev/null
+++ b/include/ansi_stdlib.h
@@ -0,0 +1,54 @@
+/* ansi_stdlib.h -- An ANSI Standard stdlib.h. */
+/* A minimal stdlib.h containing extern declarations for those functions
+   that bash uses. */
+
+/* Copyright (C) 1993 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_STDLIB_H_)
+#define	_STDLIB_H_ 1
+
+/* String conversion functions. */
+extern int atoi ();
+
+extern double atof ();
+extern double strtod ();
+
+/* Memory allocation functions. */
+/* Generic pointer type. */
+#ifndef PTR_T
+
+#if defined (__STDC__)
+#  define PTR_T	void *
+#else
+#  define PTR_T char *
+#endif
+
+#endif /* PTR_T */
+
+extern PTR_T malloc ();
+extern PTR_T realloc ();
+extern void free ();
+
+/* Other miscellaneous functions. */
+extern void abort ();
+extern void exit ();
+extern char *getenv ();
+extern void qsort ();
+
+#endif /* _STDLIB_H  */
diff --git a/include/chartypes.h b/include/chartypes.h
new file mode 100644
index 0000000..098cfb9
--- /dev/null
+++ b/include/chartypes.h
@@ -0,0 +1,113 @@
+/* chartypes.h -- extend ctype.h */
+
+/* Copyright (C) 2001 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _SH_CHARTYPES_H
+#define _SH_CHARTYPES_H
+
+#include <ctype.h>
+
+/* Jim Meyering writes:
+
+   "... Some ctype macros are valid only for character codes that
+   isascii says are ASCII (SGI's IRIX-4.0.5 is one such system --when
+   using /bin/cc or gcc but without giving an ansi option).  So, all
+   ctype uses should be through macros like ISPRINT...  If
+   STDC_HEADERS is defined, then autoconf has verified that the ctype
+   macros don't need to be guarded with references to isascii. ...
+   Defining IN_CTYPE_DOMAIN to 1 should let any compiler worth its salt
+   eliminate the && through constant folding."
+   Solaris defines some of these symbols so we must undefine them first.  */
+
+#if STDC_HEADERS || (!defined (isascii) && !HAVE_ISASCII)
+#  define IN_CTYPE_DOMAIN(c) 1
+#else
+#  define IN_CTYPE_DOMAIN(c) isascii(c)
+#endif
+
+#if !defined (isspace) && !defined (HAVE_ISSPACE)
+#  define isspace(c) ((c) == ' ' || (c) == '\t' || (c) == '\n' || (c) == '\f')
+#endif
+
+#if !defined (isprint) && !defined (HAVE_ISPRINT)
+#  define isprint(c) (isalpha((unsigned char)c) || isdigit((unsigned char)c) || ispunct((unsigned char)c))
+#endif
+
+#if defined (isblank) || defined (HAVE_ISBLANK)
+#  define ISBLANK(c) (IN_CTYPE_DOMAIN (c) && isblank ((unsigned char)c))
+#else
+#  define ISBLANK(c) ((c) == ' ' || (c) == '\t')
+#endif
+
+#if defined (isgraph) || defined (HAVE_ISGRAPH)
+#  define ISGRAPH(c) (IN_CTYPE_DOMAIN (c) && isgraph (c))
+#else
+#  define ISGRAPH(c) (IN_CTYPE_DOMAIN (c) && isprint ((unsigned char)c) && !isspace ((unsigned char)c))
+#endif
+
+#if !defined (isxdigit) && !defined (HAVE_ISXDIGIT)
+#  define isxdigit(c)	(((c) >= '0' && (c) <= '9') || ((c) >= 'a' && (c) <= 'f') || ((c) >= 'A' && (c) <= 'F'))
+#endif
+
+#undef ISPRINT
+
+#define ISPRINT(c) (IN_CTYPE_DOMAIN (c) && isprint ((unsigned char)c))
+#define ISDIGIT(c) (IN_CTYPE_DOMAIN (c) && isdigit ((unsigned char)c))
+#define ISALNUM(c) (IN_CTYPE_DOMAIN (c) && isalnum ((unsigned char)c))
+#define ISALPHA(c) (IN_CTYPE_DOMAIN (c) && isalpha ((unsigned char)c))
+#define ISCNTRL(c) (IN_CTYPE_DOMAIN (c) && iscntrl ((unsigned char)c))
+#define ISLOWER(c) (IN_CTYPE_DOMAIN (c) && islower ((unsigned char)c))
+#define ISPUNCT(c) (IN_CTYPE_DOMAIN (c) && ispunct ((unsigned char)c))
+#define ISSPACE(c) (IN_CTYPE_DOMAIN (c) && isspace ((unsigned char)c))
+#define ISUPPER(c) (IN_CTYPE_DOMAIN (c) && isupper ((unsigned char)c))
+#define ISXDIGIT(c) (IN_CTYPE_DOMAIN (c) && isxdigit ((unsigned char)c))
+
+#define ISLETTER(c)	(ISALPHA(c))
+
+#define DIGIT(c)	((c) >= '0' && (c) <= '9')
+
+#define ISWORD(c)	(ISLETTER(c) || DIGIT(c) || ((c) == '_'))
+
+#define HEXVALUE(c) \
+  (((c) >= 'a' && (c) <= 'f') \
+	? (c)-'a'+10 \
+	: (c) >= 'A' && (c) <= 'F' ? (c)-'A'+10 : (c)-'0')
+                  
+#ifndef ISOCTAL
+#  define ISOCTAL(c)	((c) >= '0' && (c) <= '7')
+#endif
+#define OCTVALUE(c)	((c) - '0')
+
+#define TODIGIT(c)	((c) - '0')
+#define TOCHAR(c)	((c) + '0')
+
+#define TOLOWER(c)	(ISUPPER(c) ? tolower(c) : (c))
+#define TOUPPER(c)	(ISLOWER(c) ? toupper(c) : (c))
+
+#ifndef TOCTRL
+   /* letter to control char -- ASCII.  The TOUPPER is in there so \ce and
+      \cE will map to the same character in $'...' expansions. */
+#  define TOCTRL(x)	((x) == '?' ? 0x7f : (TOUPPER(x) & 0x1f))
+#endif
+#ifndef UNCTRL
+   /* control char to letter -- ASCII */
+#  define UNCTRL(x)	(TOUPPER(x) ^ 0x40)
+#endif
+
+#endif /* _SH_CHARTYPES_H */
diff --git a/include/filecntl.h b/include/filecntl.h
new file mode 100644
index 0000000..9bcbab8
--- /dev/null
+++ b/include/filecntl.h
@@ -0,0 +1,53 @@
+/* filecntl.h - Definitions to set file descriptors to close-on-exec. */
+
+/* Copyright (C) 1993 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_FILECNTL_H_)
+#define _FILECNTL_H_
+
+#include <fcntl.h>
+
+/* Definitions to set file descriptors to close-on-exec, the Posix way. */
+#if !defined (FD_CLOEXEC)
+#define FD_CLOEXEC     1
+#endif
+
+#define FD_NCLOEXEC    0
+
+#define SET_CLOSE_ON_EXEC(fd)  (fcntl ((fd), F_SETFD, FD_CLOEXEC))
+#define SET_OPEN_ON_EXEC(fd)   (fcntl ((fd), F_SETFD, FD_NCLOEXEC))
+
+/* How to open a file in non-blocking mode, the Posix.1 way. */
+#if !defined (O_NONBLOCK)
+#  if defined (O_NDELAY)
+#    define O_NONBLOCK O_NDELAY
+#  else
+#    define O_NONBLOCK 0
+#  endif
+#endif
+
+/* Make sure O_BINARY and O_TEXT are defined to avoid Windows-specific code. */
+#if !defined (O_BINARY)
+#  define O_BINARY 0
+#endif
+#if !defined (O_TEXT)
+#  define O_TEXT 0
+#endif
+
+#endif /* ! _FILECNTL_H_ */
diff --git a/include/gettext.h b/include/gettext.h
new file mode 100644
index 0000000..97a1f36
--- /dev/null
+++ b/include/gettext.h
@@ -0,0 +1,70 @@
+/* Convenience header for conditional use of GNU <libintl.h>.
+   Copyright (C) 1995-1998, 2000-2002, 2008,2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne-Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _LIBGETTEXT_H
+#define _LIBGETTEXT_H 1
+
+/* NLS can be disabled through the configure --disable-nls option.  */
+#if ENABLE_NLS
+
+/* Get declarations of GNU message catalog functions.  */
+# include <libintl.h>
+
+#else
+
+/* Solaris /usr/include/locale.h includes /usr/include/libintl.h, which
+   chokes if dcgettext is defined as a macro.  So include it now, to make
+   later inclusions of <locale.h> a NOP.  We don't include <libintl.h>
+   as well because people using "gettext.h" will not include <libintl.h>,
+   and also including <libintl.h> would fail on SunOS 4, whereas <locale.h>
+   is OK.  */
+#if defined(__sun)
+# include <locale.h>
+#endif
+
+/* Disabled NLS.
+   The casts to 'const char *' serve the purpose of producing warnings
+   for invalid uses of the value returned from these functions.
+   On pre-ANSI systems without 'const', the config.h file is supposed to
+   contain "#define const".  */
+# define gettext(Msgid) ((const char *) (Msgid))
+# define dgettext(Domainname, Msgid) ((const char *) (Msgid))
+# define dcgettext(Domainname, Msgid, Category) ((const char *) (Msgid))
+# define ngettext(Msgid1, Msgid2, N) \
+    ((N) == 1 ? (const char *) (Msgid1) : (const char *) (Msgid2))
+# define dngettext(Domainname, Msgid1, Msgid2, N) \
+    ((N) == 1 ? (const char *) (Msgid1) : (const char *) (Msgid2))
+# define dcngettext(Domainname, Msgid1, Msgid2, N, Category) \
+    ((N) == 1 ? (const char *) (Msgid1) : (const char *) (Msgid2))
+# define textdomain(Domainname) ((const char *) (Domainname))
+# define bindtextdomain(Domainname, Dirname) ((const char *) (Dirname))
+# define bind_textdomain_codeset(Domainname, Codeset) ((const char *) (Codeset))
+
+#endif
+
+/* A pseudo function call that serves as a marker for the automated
+   extraction of messages, but does not call gettext().  The run-time
+   translation is done at a different place in the code.
+   The argument, String, should be a literal string.  Concatenated strings
+   and other string expressions won't work.
+   The macro's expansion is not parenthesized, so that it is suitable as
+   initializer for static 'char[]' or 'const char[]' variables.  */
+#define gettext_noop(String) String
+
+#endif /* _LIBGETTEXT_H */
diff --git a/include/maxpath.h b/include/maxpath.h
new file mode 100644
index 0000000..db2e1fb
--- /dev/null
+++ b/include/maxpath.h
@@ -0,0 +1,75 @@
+/* maxpath.h - Find out what this system thinks PATH_MAX and NAME_MAX are. */
+
+/* Copyright (C) 1993 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_MAXPATH_H_)
+#define _MAXPATH_H_
+
+/* These values are supposed to be in <limits.h> or one of the files
+   it includes. */
+#if defined (HAVE_LIMITS_H)
+#  include <limits.h>
+#endif /* !HAVE_LIMITS_H */
+
+/* If PATH_MAX is not defined, look for MAXPATHLEN */
+#if !defined (PATH_MAX)
+#  if defined (HAVE_SYS_PARAM_H)
+#    include <sys/param.h>
+#    define maxpath_param_h
+#  endif
+#  if defined (MAXPATHLEN) && !defined (PATH_MAX)
+#    define PATH_MAX MAXPATHLEN
+#  endif /* MAXPATHLEN && !PATH_MAX */
+#endif /* !PATH_MAX */
+
+/* If NAME_MAX is not defined, look for MAXNAMLEN */
+#if !defined (NAME_MAX)
+#  if defined (HAVE_SYS_PARAM_H) && !defined (maxpath_param_h)
+#    include <sys/param.h>
+#  endif
+#  if defined (MAXNAMLEN) && !defined (NAME_MAX)
+#    define NAME_MAX MAXNAMLEN
+#  endif /* MAXNAMLEN && !NAME_MAX */
+#endif /* !NAME_MAX */
+
+/* Default POSIX values */
+#if !defined (PATH_MAX) && defined (_POSIX_PATH_MAX)
+#  define PATH_MAX _POSIX_PATH_MAX
+#endif
+
+#if !defined (NAME_MAX) && defined (_POSIX_NAME_MAX)
+#  define NAME_MAX _POSIX_NAME_MAX
+#endif
+
+
+/* Default values */
+#if !defined (PATH_MAX)
+#  define PATH_MAX 1024
+#endif
+
+#if !defined (NAME_MAX)
+#  define NAME_MAX 14
+#endif
+
+#if PATH_MAX < 1024
+#  undef PATH_MAX
+#  define PATH_MAX 1024
+#endif
+
+#endif /* _MAXPATH_H_ */
diff --git a/include/memalloc.h b/include/memalloc.h
new file mode 100644
index 0000000..57318b9
--- /dev/null
+++ b/include/memalloc.h
@@ -0,0 +1,62 @@
+/* memalloc.h -- consolidate code for including alloca.h or malloc.h and
+   defining alloca. */
+
+/* Copyright (C) 1993 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_MEMALLOC_H_)
+#  define _MEMALLOC_H_
+
+#if defined (sparc) && defined (sun) && !defined (HAVE_ALLOCA_H)
+#  define HAVE_ALLOCA_H
+#endif
+
+#if defined (__GNUC__) && !defined (HAVE_ALLOCA)
+#  define HAVE_ALLOCA
+#endif
+
+#if defined (HAVE_ALLOCA_H) && !defined (HAVE_ALLOCA) && !defined (C_ALLOCA)
+#  define HAVE_ALLOCA
+#endif /* HAVE_ALLOCA_H && !HAVE_ALLOCA */
+
+#if defined (__GNUC__) && !defined (C_ALLOCA)
+#  undef alloca
+#  define alloca __builtin_alloca
+#else /* !__GNUC__ || C_ALLOCA */
+#  if defined (HAVE_ALLOCA_H) && !defined (C_ALLOCA)
+#    if defined (IBMESA)
+#      include <malloc.h>
+#    else /* !IBMESA */
+#      include <alloca.h>
+#    endif /* !IBMESA */
+#  else  /* !HAVE_ALLOCA_H || C_ALLOCA */
+#    if defined (__hpux) && defined (__STDC__) && !defined (alloca)
+extern void *alloca ();
+#    else
+#      if !defined (alloca)
+#        if defined (__STDC__)
+extern void *alloca (size_t);
+#        else
+extern char *alloca ();
+#        endif /* !__STDC__ */
+#      endif /* !alloca */
+#    endif /* !__hpux || !__STDC__ && !alloca */
+#  endif /* !HAVE_ALLOCA_H || C_ALLOCA */
+#endif /* !__GNUC__ || C_ALLOCA */
+
+#endif /* _MEMALLOC_H_ */
diff --git a/include/ocache.h b/include/ocache.h
new file mode 100644
index 0000000..c596c27
--- /dev/null
+++ b/include/ocache.h
@@ -0,0 +1,133 @@
+/* ocache.h -- a minimal object caching implementation. */
+
+/* Copyright (C) 2002 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_OCACHE_H_)
+#define	_OCACHE_H_ 1
+
+#ifndef PTR_T
+
+#if defined (__STDC__)
+#  define PTR_T void *
+#else
+#  define PTR_T char *
+#endif
+
+#endif /* PTR_T */
+
+#define OC_MEMSET(memp, xch, nbytes)					\
+do {									\
+  if ((nbytes) <= 32) {							\
+    register char * mzp = (char *)(memp);				\
+    unsigned long mctmp = (nbytes);					\
+    register long mcn;							\
+    if (mctmp < 8) mcn = 0; else { mcn = (mctmp-1)/8; mctmp &= 7; }	\
+    switch (mctmp) {							\
+      case 0: for(;;) { *mzp++ = xch;					\
+      case 7:	   *mzp++ = xch;					\
+      case 6:	   *mzp++ = xch;					\
+      case 5:	   *mzp++ = xch;					\
+      case 4:	   *mzp++ = xch;					\
+      case 3:	   *mzp++ = xch;					\
+      case 2:	   *mzp++ = xch;					\
+      case 1:	   *mzp++ = xch; if(mcn <= 0) break; mcn--; }		\
+    }									\
+  } else								\
+    memset ((memp), (xch), (nbytes));					\
+} while(0)
+
+typedef struct objcache {
+	PTR_T	data;
+	int	cs;		/* cache size, number of objects */
+	int	nc;		/* number of cache entries */
+} sh_obj_cache_t;
+
+/* Create an object cache C of N pointers to OTYPE. */
+#define ocache_create(c, otype, n) \
+	do { \
+		(c).data = xmalloc((n) * sizeof (otype *)); \
+		(c).cs = (n); \
+		(c).nc = 0; \
+	} while (0)
+
+/* Destroy an object cache C. */
+#define ocache_destroy(c) \
+	do { \
+		if ((c).data) \
+			xfree ((c).data); \
+		(c).data = 0; \
+		(c).cs = (c).nc = 0; \
+	} while (0)
+
+/* Free all cached items, which are pointers to OTYPE, in object cache C. */
+#define ocache_flush(c, otype) \
+	do { \
+		while ((c).nc > 0) \
+			xfree (((otype **)((c).data))[--(c).nc]); \
+	} while (0)
+
+/*
+ * Allocate a new item of type pointer to OTYPE, using data from object
+ * cache C if any cached items exist, otherwise calling xmalloc.  Return
+ * the object in R.
+ */
+#define ocache_alloc(c, otype, r) \
+	do { \
+		if ((c).nc > 0) { \
+			(r) = (otype *)((otype **)((c).data))[--(c).nc]; \
+		} else \
+			(r) = (otype *)xmalloc (sizeof (otype)); \
+	} while (0)
+
+/*
+ * Free an item R of type pointer to OTYPE, adding to object cache C if
+ * there is room and calling xfree if the cache is full.  If R is added
+ * to the object cache, the contents are scrambled.
+ */
+#define ocache_free(c, otype, r) \
+	do { \
+		if ((c).nc < (c).cs) { \
+			OC_MEMSET ((r), 0xdf, sizeof(otype)); \
+			((otype **)((c).data))[(c).nc++] = (r); \
+		} else \
+			xfree (r); \
+	} while (0)
+
+/*
+ * One may declare and use an object cache as (for instance):
+ *
+ *	sh_obj_cache_t wdcache = {0, 0, 0};
+ *	sh_obj_cache_t wlcache = {0, 0, 0};
+ *
+ *	ocache_create(wdcache, WORD_DESC, 30);
+ *	ocache_create(wlcache, WORD_LIST, 30);
+ *
+ *	WORD_DESC *wd;
+ *	ocache_alloc (wdcache, WORD_DESC, wd);
+ *
+ *	WORD_LIST *wl;
+ *	ocache_alloc (wlcache, WORD_LIST, wl);
+ *
+ *	ocache_free(wdcache, WORD_DESC, wd);
+ *	ocache_free(wlcache, WORD_LIST, wl);
+ *
+ * The use is almost arbitrary.
+ */
+
+#endif /* _OCACHE_H  */
diff --git a/include/posixdir.h b/include/posixdir.h
new file mode 100644
index 0000000..af5be80
--- /dev/null
+++ b/include/posixdir.h
@@ -0,0 +1,71 @@
+/* posixdir.h -- Posix directory reading includes and defines. */
+
+/* Copyright (C) 1987,1991,2012 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* This file should be included instead of <dirent.h> or <sys/dir.h>. */
+
+#if !defined (_POSIXDIR_H_)
+#define _POSIXDIR_H_
+
+#if defined (HAVE_DIRENT_H)
+#  include <dirent.h>
+#  if defined (HAVE_STRUCT_DIRENT_D_NAMLEN)
+#    define D_NAMLEN(d)	((d)->d_namlen)
+#  else
+#    define D_NAMLEN(d)   (strlen ((d)->d_name))
+#  endif /* !HAVE_STRUCT_DIRENT_D_NAMLEN */
+#else
+#  if defined (HAVE_SYS_NDIR_H)
+#    include <sys/ndir.h>
+#  endif
+#  if defined (HAVE_SYS_DIR_H)
+#    include <sys/dir.h>
+#  endif
+#  if defined (HAVE_NDIR_H)
+#    include <ndir.h>
+#  endif
+#  if !defined (dirent)
+#    define dirent direct
+#  endif /* !dirent */
+#  define D_NAMLEN(d)   ((d)->d_namlen)
+#endif /* !HAVE_DIRENT_H */
+
+/* The bash code fairly consistently uses d_fileno; make sure it's available */
+#if defined (HAVE_STRUCT_DIRENT_D_INO) && !defined (HAVE_STRUCT_DIRENT_D_FILENO)
+#  define d_fileno d_ino
+#endif
+
+/* Posix does not require that the d_ino field be present, and some
+   systems do not provide it. */
+#if !defined (HAVE_STRUCT_DIRENT_D_INO) || defined (BROKEN_DIRENT_D_INO)
+#  define REAL_DIR_ENTRY(dp) 1
+#else
+#  define REAL_DIR_ENTRY(dp) (dp->d_ino != 0)
+#endif /* _POSIX_SOURCE */
+
+#if defined (HAVE_STRUCT_DIRENT_D_INO) && !defined (BROKEN_DIRENT_D_INO)
+#  define D_INO_AVAILABLE
+#endif
+
+/* Signal the rest of the code that it can safely use dirent.d_fileno */
+#if defined (D_INO_AVAILABLE) || defined (HAVE_STRUCT_DIRENT_D_FILENO)
+#  define D_FILENO_AVAILABLE 1
+#endif
+
+#endif /* !_POSIXDIR_H_ */
diff --git a/include/posixjmp.h b/include/posixjmp.h
new file mode 100644
index 0000000..9c7e99e
--- /dev/null
+++ b/include/posixjmp.h
@@ -0,0 +1,46 @@
+/* posixjmp.h -- wrapper for setjmp.h with changes for POSIX systems. */
+
+/* Copyright (C) 1987,1991-2015 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _POSIXJMP_H_
+#define _POSIXJMP_H_
+
+#include <setjmp.h>
+
+/* This *must* be included *after* config.h */
+
+#if defined (HAVE_POSIX_SIGSETJMP)
+#  define procenv_t	sigjmp_buf
+
+#  define setjmp_nosigs(x)	sigsetjmp((x), 0)
+#  define setjmp_sigs(x)	sigsetjmp((x), 1)
+
+#  define _rl_longjmp(x, n)	siglongjmp((x), (n))
+#  define sh_longjmp(x, n)	siglongjmp((x), (n))
+#else
+#  define procenv_t	jmp_buf
+
+#  define setjmp_nosigs		setjmp
+#  define setjmp_sigs		setjmp
+
+#  define _rl_longjmp(x, n)	longjmp((x), (n))
+#  define sh_longjmp(x, n)	longjmp((x), (n))
+#endif
+
+#endif /* _POSIXJMP_H_ */
diff --git a/include/posixselect.h b/include/posixselect.h
new file mode 100644
index 0000000..da6a1ac
--- /dev/null
+++ b/include/posixselect.h
@@ -0,0 +1,47 @@
+/* posixselect.h -- wrapper for select(2) includes and definitions */
+
+/* Copyright (C) 2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _POSIXSELECT_H_
+#define _POSIXSELECT_H_
+
+#if defined (FD_SET) && !defined (HAVE_SELECT)
+#  define HAVE_SELECT 1
+#endif
+
+#if defined (HAVE_SELECT)
+#  if !defined (HAVE_SYS_SELECT_H) || !defined (M_UNIX)
+#    include <sys/time.h>
+#  endif
+#endif /* HAVE_SELECT */
+#if defined (HAVE_SYS_SELECT_H)
+#  include <sys/select.h>
+#endif
+
+#ifndef USEC_PER_SEC
+#  define USEC_PER_SEC 1000000
+#endif
+
+#define USEC_TO_TIMEVAL(us, tv) \
+do { \
+  (tv).tv_sec = (us) / USEC_PER_SEC; \
+  (tv).tv_usec = (us) % USEC_PER_SEC; \
+} while (0)
+
+#endif /* _POSIXSELECT_H_ */
diff --git a/include/posixstat.h b/include/posixstat.h
new file mode 100644
index 0000000..b607786
--- /dev/null
+++ b/include/posixstat.h
@@ -0,0 +1,162 @@
+/* posixstat.h -- Posix stat(2) definitions for systems that
+   don't have them. */
+
+/* Copyright (C) 1987-2019 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* This file should be included instead of <sys/stat.h>.
+   It relies on the local sys/stat.h to work though. */
+#if !defined (_POSIXSTAT_H_)
+#define _POSIXSTAT_H_
+
+#include <sys/stat.h>
+
+#if defined (STAT_MACROS_BROKEN)
+#  undef S_ISBLK
+#  undef S_ISCHR
+#  undef S_ISDIR
+#  undef S_ISFIFO
+#  undef S_ISREG
+#  undef S_ISLNK
+#endif /* STAT_MACROS_BROKEN */
+
+/* These are guaranteed to work only on isc386 */
+#if !defined (S_IFDIR) && !defined (S_ISDIR)
+#  define S_IFDIR 0040000
+#endif /* !S_IFDIR && !S_ISDIR */
+#if !defined (S_IFMT)
+#  define S_IFMT  0170000
+#endif /* !S_IFMT */
+
+/* Posix 1003.1 5.6.1.1 <sys/stat.h> file types */
+
+/* Some Posix-wannabe systems define _S_IF* macros instead of S_IF*, but
+   do not provide the S_IS* macros that Posix requires. */
+
+#if defined (_S_IFMT) && !defined (S_IFMT)
+#define S_IFMT _S_IFMT
+#endif
+#if defined (_S_IFIFO) && !defined (S_IFIFO)
+#define S_IFIFO _S_IFIFO
+#endif
+#if defined (_S_IFCHR) && !defined (S_IFCHR)
+#define S_IFCHR _S_IFCHR
+#endif
+#if defined (_S_IFDIR) && !defined (S_IFDIR)
+#define S_IFDIR _S_IFDIR
+#endif
+#if defined (_S_IFBLK) && !defined (S_IFBLK)
+#define S_IFBLK _S_IFBLK
+#endif
+#if defined (_S_IFREG) && !defined (S_IFREG)
+#define S_IFREG _S_IFREG
+#endif
+#if defined (_S_IFLNK) && !defined (S_IFLNK)
+#define S_IFLNK _S_IFLNK
+#endif
+#if defined (_S_IFSOCK) && !defined (S_IFSOCK)
+#define S_IFSOCK _S_IFSOCK
+#endif
+
+/* Test for each symbol individually and define the ones necessary (some
+   systems claiming Posix compatibility define some but not all). */
+
+#if defined (S_IFBLK) && !defined (S_ISBLK)
+#define	S_ISBLK(m)	(((m)&S_IFMT) == S_IFBLK)	/* block device */
+#endif
+
+#if defined (S_IFCHR) && !defined (S_ISCHR)
+#define	S_ISCHR(m)	(((m)&S_IFMT) == S_IFCHR)	/* character device */
+#endif
+
+#if defined (S_IFDIR) && !defined (S_ISDIR)
+#define	S_ISDIR(m)	(((m)&S_IFMT) == S_IFDIR)	/* directory */
+#endif
+
+#if defined (S_IFREG) && !defined (S_ISREG)
+#define	S_ISREG(m)	(((m)&S_IFMT) == S_IFREG)	/* file */
+#endif
+
+#if defined (S_IFIFO) && !defined (S_ISFIFO)
+#define	S_ISFIFO(m)	(((m)&S_IFMT) == S_IFIFO)	/* fifo - named pipe */
+#endif
+
+#if defined (S_IFLNK) && !defined (S_ISLNK)
+#define	S_ISLNK(m)	(((m)&S_IFMT) == S_IFLNK)	/* symbolic link */
+#endif
+
+#if defined (S_IFSOCK) && !defined (S_ISSOCK)
+#define	S_ISSOCK(m)	(((m)&S_IFMT) == S_IFSOCK)	/* socket */
+#endif
+
+/*
+ * POSIX 1003.1 5.6.1.2 <sys/stat.h> File Modes
+ */
+
+#if !defined (S_IRWXU)
+#  if !defined (S_IREAD)
+#    define S_IREAD	00400
+#    define S_IWRITE	00200
+#    define S_IEXEC	00100
+#  endif /* S_IREAD */
+
+#  if !defined (S_IRUSR)
+#    define S_IRUSR	S_IREAD			/* read, owner */
+#    define S_IWUSR	S_IWRITE		/* write, owner */
+#    define S_IXUSR	S_IEXEC			/* execute, owner */
+
+#    define S_IRGRP	(S_IREAD  >> 3)		/* read, group */
+#    define S_IWGRP	(S_IWRITE >> 3)		/* write, group */
+#    define S_IXGRP	(S_IEXEC  >> 3)		/* execute, group */
+
+#    define S_IROTH	(S_IREAD  >> 6)		/* read, other */
+#    define S_IWOTH	(S_IWRITE >> 6)		/* write, other */
+#    define S_IXOTH	(S_IEXEC  >> 6)		/* execute, other */
+#  endif /* !S_IRUSR */
+
+#  define S_IRWXU	(S_IRUSR | S_IWUSR | S_IXUSR)
+#  define S_IRWXG	(S_IRGRP | S_IWGRP | S_IXGRP)
+#  define S_IRWXO	(S_IROTH | S_IWOTH | S_IXOTH)
+#else /* !S_IRWXU */
+  /* S_IRWXU is defined, but "group" and "other" bits might not be
+     (happens in certain versions of MinGW).  */
+#  if !defined (S_IRGRP)
+#    define S_IRGRP	(S_IREAD  >> 3)		/* read, group */
+#    define S_IWGRP	(S_IWRITE >> 3)		/* write, group */
+#    define S_IXGRP	(S_IEXEC  >> 3)		/* execute, group */
+#  endif /* !S_IRGRP */
+
+#  if !defined (S_IROTH)
+#    define S_IROTH	(S_IREAD  >> 6)		/* read, other */
+#    define S_IWOTH	(S_IWRITE >> 6)		/* write, other */
+#    define S_IXOTH	(S_IEXEC  >> 6)		/* execute, other */
+#  endif /* !S_IROTH */
+#  if !defined (S_IRWXG)
+#    define S_IRWXG	(S_IRGRP | S_IWGRP | S_IXGRP)
+#  endif
+#  if !defined (S_IRWXO)
+#    define S_IRWXO	(S_IROTH | S_IWOTH | S_IXOTH)
+#  endif
+#endif /* !S_IRWXU */
+
+/* These are non-standard, but are used in builtins.c$symbolic_umask() */
+#define S_IRUGO		(S_IRUSR | S_IRGRP | S_IROTH)
+#define S_IWUGO		(S_IWUSR | S_IWGRP | S_IWOTH)
+#define S_IXUGO		(S_IXUSR | S_IXGRP | S_IXOTH)
+
+#endif /* _POSIXSTAT_H_ */
diff --git a/include/posixtime.h b/include/posixtime.h
new file mode 100644
index 0000000..a83e436
--- /dev/null
+++ b/include/posixtime.h
@@ -0,0 +1,61 @@
+/* posixtime.h -- wrapper for time.h, sys/times.h mess. */
+
+/* Copyright (C) 1999 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _POSIXTIME_H_
+#define _POSIXTIME_H_
+
+/* include this after config.h */
+/* Some systems require this, mostly for the definition of `struct timezone'.
+   For example, Dynix/ptx has that definition in <time.h> rather than
+      sys/time.h */
+#if defined (TIME_WITH_SYS_TIME)
+#  include <sys/time.h>
+#  include <time.h>
+#else
+#  if defined (HAVE_SYS_TIME_H)
+#    include <sys/time.h>
+#  else
+#    include <time.h>
+#  endif
+#endif
+
+#if !defined (HAVE_SYSCONF) || !defined (_SC_CLK_TCK)
+#  if !defined (CLK_TCK)
+#    if defined (HZ)
+#      define CLK_TCK	HZ
+#    else
+#      define CLK_TCK	60			/* 60HZ */
+#    endif
+#  endif /* !CLK_TCK */
+#endif /* !HAVE_SYSCONF && !_SC_CLK_TCK */
+
+#if !HAVE_TIMEVAL
+struct timeval
+{
+  time_t tv_sec;
+  long int tv_usec;
+};
+#endif
+
+#if !HAVE_GETTIMEOFDAY
+extern int gettimeofday PARAMS((struct timeval *, void *));
+#endif
+
+#endif /* _POSIXTIME_H_ */
diff --git a/include/posixwait.h b/include/posixwait.h
new file mode 100644
index 0000000..63b59c2
--- /dev/null
+++ b/include/posixwait.h
@@ -0,0 +1,107 @@
+/* posixwait.h -- job control definitions from POSIX 1003.1 */
+
+/* Copyright (C) 1997 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_POSIXWAIT_H_)
+#  define _POSIXWAIT_H_
+
+/* If _POSIX_VERSION is not defined, we assume that <sys/wait.h> defines
+   a `union wait' and various macros used to manipulate it.  Look in
+   unionwait.h for the things we expect to find. */
+#if defined (HAVE_SYS_WAIT_H)
+#  include <sys/wait.h>
+#else /* !HAVE_SYS_WAIT_H */
+#  if !defined (_POSIX_VERSION)
+#    include "unionwait.h"
+#  endif
+#endif  /* !HAVE_SYS_WAIT_H */
+
+/* How to get the status of a job.  For Posix, this is just an
+   int, but for other systems we have to crack the union wait. */
+#if !defined (_POSIX_VERSION)
+typedef union wait WAIT;
+#  define WSTATUS(t)  (t.w_status)
+#else /* _POSIX_VERSION */
+typedef int WAIT;
+#  define WSTATUS(t)  (t)
+#endif /* _POSIX_VERSION */
+
+/* Make sure that parameters to wait3 are defined. */
+#if !defined (WNOHANG)
+#  define WNOHANG 1
+#  define WUNTRACED 2
+#endif /* WNOHANG */
+
+/* More Posix P1003.1 definitions.  In the POSIX versions, the parameter is
+   passed as an `int', in the non-POSIX version, as `union wait'. */
+#if defined (_POSIX_VERSION)
+
+#  if !defined (WSTOPSIG)
+#    define WSTOPSIG(s)       ((s) >> 8)
+#  endif /* !WSTOPSIG */
+
+#  if !defined (WTERMSIG)
+#    define WTERMSIG(s)	      ((s) & 0177)
+#  endif /* !WTERMSIG */
+
+#  if !defined (WEXITSTATUS)
+#    define WEXITSTATUS(s)    ((s) >> 8)
+#  endif /* !WEXITSTATUS */
+
+#  if !defined (WIFSTOPPED)
+#    define WIFSTOPPED(s)     (((s) & 0177) == 0177)
+#  endif /* !WIFSTOPPED */
+
+#  if !defined (WIFEXITED)
+#    define WIFEXITED(s)      (((s) & 0377) == 0)
+#  endif /* !WIFEXITED */
+
+#  if !defined (WIFSIGNALED)
+#    define WIFSIGNALED(s)    (!WIFSTOPPED(s) && !WIFEXITED(s))
+#  endif /* !WIFSIGNALED */
+
+#  if !defined (WIFCORED)
+#    if defined (WCOREDUMP)
+#      define WIFCORED(s)	(WCOREDUMP(s))
+#    else
+#      define WIFCORED(s)       ((s) & 0200)
+#    endif
+#  endif /* !WIFCORED */
+
+#else /* !_POSIX_VERSION */
+
+#  if !defined (WSTOPSIG)
+#    define WSTOPSIG(s)	      ((s).w_stopsig)
+#  endif /* !WSTOPSIG */
+
+#  if !defined (WTERMSIG)
+#    define WTERMSIG(s)	      ((s).w_termsig)
+#  endif /* !WTERMSIG */
+
+#  if !defined (WEXITSTATUS)
+#    define WEXITSTATUS(s)    ((s).w_retcode)
+#  endif /* !WEXITSTATUS */
+
+#  if !defined (WIFCORED)
+#    define WIFCORED(s)       ((s).w_coredump)
+#  endif /* !WIFCORED */
+
+#endif /* !_POSIX_VERSION */
+
+#endif /* !_POSIXWAIT_H_ */
diff --git a/include/shmbchar.h b/include/shmbchar.h
new file mode 100644
index 0000000..a4f3f24
--- /dev/null
+++ b/include/shmbchar.h
@@ -0,0 +1,112 @@
+/* Multibyte character data type.
+   Copyright (C) 2001, 2005-2007, 2009-2010 Free Software Foundation, Inc.
+
+   This program is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+/* Written by Bruno Haible <bruno@clisp.org>.  */
+
+#ifndef _SHMBCHAR_H
+#define _SHMBCHAR_H 1
+
+#if defined (HANDLE_MULTIBYTE)
+
+#include <string.h>
+
+/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
+   <wchar.h>.
+   BSD/OS 4.1 has a bug: <stdio.h> and <time.h> must be included before
+   <wchar.h>.  */
+#include <stdio.h>
+#include <time.h>
+#include <wchar.h>
+#include <wctype.h>
+
+
+/* is_basic(c) tests whether the single-byte character c is in the
+   ISO C "basic character set". */
+
+#if (' ' == 32) && ('!' == 33) && ('"' == 34) && ('#' == 35) \
+    && ('%' == 37) && ('&' == 38) && ('\'' == 39) && ('(' == 40) \
+    && (')' == 41) && ('*' == 42) && ('+' == 43) && (',' == 44) \
+    && ('-' == 45) && ('.' == 46) && ('/' == 47) && ('0' == 48) \
+    && ('1' == 49) && ('2' == 50) && ('3' == 51) && ('4' == 52) \
+    && ('5' == 53) && ('6' == 54) && ('7' == 55) && ('8' == 56) \
+    && ('9' == 57) && (':' == 58) && (';' == 59) && ('<' == 60) \
+    && ('=' == 61) && ('>' == 62) && ('?' == 63) && ('A' == 65) \
+    && ('B' == 66) && ('C' == 67) && ('D' == 68) && ('E' == 69) \
+    && ('F' == 70) && ('G' == 71) && ('H' == 72) && ('I' == 73) \
+    && ('J' == 74) && ('K' == 75) && ('L' == 76) && ('M' == 77) \
+    && ('N' == 78) && ('O' == 79) && ('P' == 80) && ('Q' == 81) \
+    && ('R' == 82) && ('S' == 83) && ('T' == 84) && ('U' == 85) \
+    && ('V' == 86) && ('W' == 87) && ('X' == 88) && ('Y' == 89) \
+    && ('Z' == 90) && ('[' == 91) && ('\\' == 92) && (']' == 93) \
+    && ('^' == 94) && ('_' == 95) && ('a' == 97) && ('b' == 98) \
+    && ('c' == 99) && ('d' == 100) && ('e' == 101) && ('f' == 102) \
+    && ('g' == 103) && ('h' == 104) && ('i' == 105) && ('j' == 106) \
+    && ('k' == 107) && ('l' == 108) && ('m' == 109) && ('n' == 110) \
+    && ('o' == 111) && ('p' == 112) && ('q' == 113) && ('r' == 114) \
+    && ('s' == 115) && ('t' == 116) && ('u' == 117) && ('v' == 118) \
+    && ('w' == 119) && ('x' == 120) && ('y' == 121) && ('z' == 122) \
+    && ('{' == 123) && ('|' == 124) && ('}' == 125) && ('~' == 126)
+/* The character set is ISO-646, not EBCDIC. */
+# define IS_BASIC_ASCII 1
+
+extern const unsigned int is_basic_table[];
+
+static inline int
+is_basic (char c)
+{
+  return (is_basic_table [(unsigned char) c >> 5] >> ((unsigned char) c & 31))
+         & 1;
+}
+
+#else
+
+static inline int
+is_basic (char c)
+{
+  switch (c)
+    {
+    case '\b': case '\r': case '\n':
+    case '\t': case '\v': case '\f':
+    case ' ': case '!': case '"': case '#': case '%':
+    case '&': case '\'': case '(': case ')': case '*':
+    case '+': case ',': case '-': case '.': case '/':
+    case '0': case '1': case '2': case '3': case '4':
+    case '5': case '6': case '7': case '8': case '9':
+    case ':': case ';': case '<': case '=': case '>':
+    case '?':
+    case 'A': case 'B': case 'C': case 'D': case 'E':
+    case 'F': case 'G': case 'H': case 'I': case 'J':
+    case 'K': case 'L': case 'M': case 'N': case 'O':
+    case 'P': case 'Q': case 'R': case 'S': case 'T':
+    case 'U': case 'V': case 'W': case 'X': case 'Y':
+    case 'Z':
+    case '[': case '\\': case ']': case '^': case '_':
+    case 'a': case 'b': case 'c': case 'd': case 'e':
+    case 'f': case 'g': case 'h': case 'i': case 'j':
+    case 'k': case 'l': case 'm': case 'n': case 'o':
+    case 'p': case 'q': case 'r': case 's': case 't':
+    case 'u': case 'v': case 'w': case 'x': case 'y':
+    case 'z': case '{': case '|': case '}': case '~':
+      return 1;
+    default:
+      return 0;
+    }
+}
+
+#endif
+
+#endif /* HANDLE_MULTIBYTE */
+#endif /* _SHMBCHAR_H */
diff --git a/include/shmbutil.h b/include/shmbutil.h
new file mode 100644
index 0000000..835fb80
--- /dev/null
+++ b/include/shmbutil.h
@@ -0,0 +1,551 @@
+/* shmbutil.h -- utility functions for multibyte characters. */
+
+/* Copyright (C) 2002-2019 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+                                 
+#if !defined (_SH_MBUTIL_H_)
+#define _SH_MBUTIL_H_
+
+#include "stdc.h"
+
+/* Include config.h for HANDLE_MULTIBYTE */
+#include <config.h>
+
+#if defined (HANDLE_MULTIBYTE)
+#include "shmbchar.h"
+
+extern size_t xwcsrtombs PARAMS((char *, const wchar_t **, size_t, mbstate_t *));
+extern size_t xmbsrtowcs PARAMS((wchar_t *, const char **, size_t, mbstate_t *));
+extern size_t xdupmbstowcs PARAMS((wchar_t **, char ***, const char *));
+
+extern size_t mbstrlen PARAMS((const char *));
+
+extern char *xstrchr PARAMS((const char *, int));
+
+extern int locale_mb_cur_max;	/* XXX */
+extern int locale_utf8locale;	/* XXX */
+
+#ifndef MB_INVALIDCH
+#define MB_INVALIDCH(x)		((x) == (size_t)-1 || (x) == (size_t)-2)
+#define MB_NULLWCH(x)		((x) == 0)
+#endif
+
+#define MBSLEN(s)	(((s) && (s)[0]) ? ((s)[1] ? mbstrlen (s) : 1) : 0)
+#define MB_STRLEN(s)	((MB_CUR_MAX > 1) ? MBSLEN (s) : STRLEN (s))
+
+#define MBLEN(s, n)	((MB_CUR_MAX > 1) ? mblen ((s), (n)) : 1)
+#define MBRLEN(s, n, p)	((MB_CUR_MAX > 1) ? mbrlen ((s), (n), (p)) : 1)
+
+#define UTF8_SINGLEBYTE(c)	(((c) & 0x80) == 0)
+#define UTF8_MBFIRSTCHAR(c)	(((c) & 0xc0) == 0xc0)
+#define UTF8_MBCHAR(c)		(((c) & 0xc0) == 0x80)
+
+#else /* !HANDLE_MULTIBYTE */
+
+#undef MB_LEN_MAX
+#undef MB_CUR_MAX
+
+#define MB_LEN_MAX	1
+#define MB_CUR_MAX	1
+
+#undef xstrchr
+#define xstrchr(s, c)	strchr(s, c)
+
+#ifndef MB_INVALIDCH
+#define MB_INVALIDCH(x)		(0)
+#define MB_NULLWCH(x)		(0)
+#endif
+
+#define MB_STRLEN(s)		(STRLEN(s))
+
+#define MBLEN(s, n)		1
+#define MBRLEN(s, n, p)		1
+
+#ifndef wchar_t
+#  define wchar_t	int
+#endif
+
+#define UTF8_SINGLEBYTE(c)	(1)
+#define UTF8_MBFIRSTCHAR(c)	(0)
+
+#endif /* !HANDLE_MULTIBYTE */
+
+/* Declare and initialize a multibyte state.  Call must be terminated
+   with `;'. */
+#if defined (HANDLE_MULTIBYTE)
+#  define DECLARE_MBSTATE \
+	mbstate_t state; \
+	memset (&state, '\0', sizeof (mbstate_t))
+#else
+#  define DECLARE_MBSTATE
+#endif  /* !HANDLE_MULTIBYTE */
+
+/* Initialize or reinitialize a multibyte state named `state'.  Call must be
+   terminated with `;'. */
+#if defined (HANDLE_MULTIBYTE)
+#  define INITIALIZE_MBSTATE memset (&state, '\0', sizeof (mbstate_t))
+#else
+#  define INITIALIZE_MBSTATE
+#endif  /* !HANDLE_MULTIBYTE */
+
+/* Advance one (possibly multi-byte) character in string _STR of length
+   _STRSIZE, starting at index _I.  STATE must have already been declared. */
+#if defined (HANDLE_MULTIBYTE)
+#  define ADVANCE_CHAR(_str, _strsize, _i) \
+    do \
+      { \
+	if (locale_mb_cur_max > 1) \
+	  { \
+	    mbstate_t state_bak; \
+	    size_t mblength; \
+	    int _f; \
+\
+	    _f = is_basic ((_str)[_i]); \
+	    if (_f) \
+	      mblength = 1; \
+	    else if (locale_utf8locale && (((_str)[_i] & 0x80) == 0)) \
+	      mblength = (_str)[_i] != 0; \
+	    else \
+	      { \
+	        state_bak = state; \
+	        mblength = mbrlen ((_str) + (_i), (_strsize) - (_i), &state); \
+	      } \
+\
+	    if (mblength == (size_t)-2 || mblength == (size_t)-1) \
+	      { \
+		state = state_bak; \
+		(_i)++; \
+	      } \
+	    else if (mblength == 0) \
+	      (_i)++; \
+	    else \
+	      (_i) += mblength; \
+	  } \
+	else \
+	  (_i)++; \
+      } \
+    while (0)
+#else
+#  define ADVANCE_CHAR(_str, _strsize, _i)	(_i)++
+#endif  /* !HANDLE_MULTIBYTE */
+
+/* Advance one (possibly multibyte) character in the string _STR of length
+   _STRSIZE.
+   SPECIAL:  assume that _STR will be incremented by 1 after this call. */
+#if defined (HANDLE_MULTIBYTE)
+#  define ADVANCE_CHAR_P(_str, _strsize) \
+    do \
+      { \
+	if (locale_mb_cur_max > 1) \
+	  { \
+	    mbstate_t state_bak; \
+	    size_t mblength; \
+	    int _f; \
+\
+	    _f = is_basic (*(_str)); \
+	    if (_f) \
+	      mblength = 1; \
+	    else if (locale_utf8locale && ((*(_str) & 0x80) == 0)) \
+	      mblength = *(_str) != 0; \
+	    else \
+	      { \
+		state_bak = state; \
+		mblength = mbrlen ((_str), (_strsize), &state); \
+	      } \
+\
+	    if (mblength == (size_t)-2 || mblength == (size_t)-1) \
+	      { \
+		state = state_bak; \
+		mblength = 1; \
+	      } \
+	    else \
+	      (_str) += (mblength < 1) ? 0 : (mblength - 1); \
+	  } \
+      } \
+    while (0)
+#else
+#  define ADVANCE_CHAR_P(_str, _strsize)
+#endif  /* !HANDLE_MULTIBYTE */
+
+/* Back up one (possibly multi-byte) character in string _STR of length
+   _STRSIZE, starting at index _I.  STATE must have already been declared. */
+#if defined (HANDLE_MULTIBYTE)
+#  define BACKUP_CHAR(_str, _strsize, _i) \
+    do \
+      { \
+	if (locale_mb_cur_max > 1) \
+	  { \
+	    mbstate_t state_bak; \
+	    size_t mblength; \
+	    int _x, _p; /* _x == temp index into string, _p == prev index */ \
+\
+	    _x = _p = 0; \
+	    while (_x < (_i)) \
+	      { \
+	        state_bak = state; \
+	        mblength = mbrlen ((_str) + (_x), (_strsize) - (_x), &state); \
+\
+		if (mblength == (size_t)-2 || mblength == (size_t)-1) \
+		  { \
+		    state = state_bak; \
+		    _x++; \
+		  } \
+		else if (mblength == 0) \
+		  _x++; \
+		else \
+		  { \
+		    _p = _x; /* _p == start of prev mbchar */ \
+		    _x += mblength; \
+		  } \
+	      } \
+	    (_i) = _p; \
+	  } \
+	else \
+	  (_i)--; \
+      } \
+    while (0)
+#else
+#  define BACKUP_CHAR(_str, _strsize, _i)	(_i)--
+#endif  /* !HANDLE_MULTIBYTE */
+
+/* Back up one (possibly multibyte) character in the string _BASE of length
+   _STRSIZE starting at _STR (_BASE <= _STR <= (_BASE + _STRSIZE) ).
+   SPECIAL: DO NOT assume that _STR will be decremented by 1 after this call. */
+#if defined (HANDLE_MULTIBYTE)
+#  define BACKUP_CHAR_P(_base, _strsize, _str) \
+    do \
+      { \
+	if (locale_mb_cur_max > 1) \
+	  { \
+	    mbstate_t state_bak; \
+	    size_t mblength; \
+	    char *_x, _p; /* _x == temp pointer into string, _p == prev pointer */ \
+\
+	    _x = _p = _base; \
+	    while (_x < (_str)) \
+	      { \
+	        state_bak = state; \
+	        mblength = mbrlen (_x, (_strsize) - _x, &state); \
+\
+		if (mblength == (size_t)-2 || mblength == (size_t)-1) \
+		  { \
+		    state = state_bak; \
+		    _x++; \
+		  } \
+		else if (mblength == 0) \
+		  _x++; \
+		else \
+		  { \
+		    _p = _x; /* _p == start of prev mbchar */ \
+		    _x += mblength; \
+		  } \
+	      } \
+	    (_str) = _p; \
+	  } \
+	else \
+	  (_str)--; \
+      } \
+    while (0)
+#else
+#  define BACKUP_CHAR_P(_base, _strsize, _str) (_str)--
+#endif  /* !HANDLE_MULTIBYTE */
+
+/* Copy a single character from the string _SRC to the string _DST.
+   _SRCEND is a pointer to the end of _SRC. */
+#if defined (HANDLE_MULTIBYTE)
+#  define COPY_CHAR_P(_dst, _src, _srcend) \
+    do \
+      { \
+	if (locale_mb_cur_max > 1) \
+	  { \
+	    mbstate_t state_bak; \
+	    size_t mblength; \
+	    int _k; \
+\
+	    _k = is_basic (*(_src)); \
+	    if (_k) \
+	      mblength = 1; \
+	    else if (locale_utf8locale && ((*(_src) & 0x80) == 0)) \
+	      mblength = *(_src) != 0; \
+	    else \
+	      { \
+		state_bak = state; \
+		mblength = mbrlen ((_src), (_srcend) - (_src), &state); \
+	      } \
+	    if (mblength == (size_t)-2 || mblength == (size_t)-1) \
+	      { \
+		state = state_bak; \
+		mblength = 1; \
+	      } \
+	    else \
+	      mblength = (mblength < 1) ? 1 : mblength; \
+\
+	    for (_k = 0; _k < mblength; _k++) \
+	      *(_dst)++ = *(_src)++; \
+	  } \
+	else \
+	  *(_dst)++ = *(_src)++; \
+      } \
+    while (0)
+#else
+#  define COPY_CHAR_P(_dst, _src, _srcend)	*(_dst)++ = *(_src)++
+#endif  /* !HANDLE_MULTIBYTE */
+
+/* Copy a single character from the string _SRC at index _SI to the string
+   _DST at index _DI.  _SRCEND is a pointer to the end of _SRC. */
+#if defined (HANDLE_MULTIBYTE)
+#  define COPY_CHAR_I(_dst, _di, _src, _srcend, _si) \
+    do \
+      { \
+	if (locale_mb_cur_max > 1) \
+	  { \
+	    mbstate_t state_bak; \
+	    size_t mblength; \
+	    int _k; \
+\
+	    _k = is_basic (*((_src) + (_si))); \
+	    if (_k) \
+	      mblength = 1; \
+	    else \
+	      {\
+		state_bak = state; \
+		mblength = mbrlen ((_src) + (_si), (_srcend) - ((_src)+(_si)), &state); \
+	      } \
+	    if (mblength == (size_t)-2 || mblength == (size_t)-1) \
+	      { \
+		state = state_bak; \
+		mblength = 1; \
+	      } \
+	    else \
+	      mblength = (mblength < 1) ? 1 : mblength; \
+\
+	    for (_k = 0; _k < mblength; _k++) \
+	      _dst[_di++] = _src[_si++]; \
+	  } \
+	else \
+	  _dst[_di++] = _src[_si++]; \
+      } \
+    while (0)
+#else
+#  define COPY_CHAR_I(_dst, _di, _src, _srcend, _si)	_dst[_di++] = _src[_si++]
+#endif  /* !HANDLE_MULTIBYTE */
+
+/****************************************************************
+ *								*
+ * The following are only guaranteed to work in subst.c		*
+ *								*
+ ****************************************************************/
+
+#if defined (HANDLE_MULTIBYTE)
+#  define SCOPY_CHAR_I(_dst, _escchar, _sc, _src, _si, _slen) \
+    do \
+      { \
+	if (locale_mb_cur_max > 1) \
+	  { \
+	    mbstate_t state_bak; \
+	    size_t mblength; \
+	    int _i; \
+\
+	    _i = is_basic (*((_src) + (_si))); \
+	    if (_i) \
+	      mblength = 1; \
+	    else \
+	      { \
+		state_bak = state; \
+		mblength = mbrlen ((_src) + (_si), (_slen) - (_si), &state); \
+	      } \
+	    if (mblength == (size_t)-2 || mblength == (size_t)-1) \
+	      { \
+		state = state_bak; \
+		mblength = 1; \
+	      } \
+	    else \
+	      mblength = (mblength < 1) ? 1 : mblength; \
+\
+	    temp = xmalloc (mblength + 2); \
+	    temp[0] = _escchar; \
+	    for (_i = 0; _i < mblength; _i++) \
+	      temp[_i + 1] = _src[_si++]; \
+	    temp[mblength + 1] = '\0'; \
+\
+	    goto add_string; \
+	  } \
+	else \
+	  { \
+	    _dst[0] = _escchar; \
+	    _dst[1] = _sc; \
+	  } \
+      } \
+    while (0)
+#else
+#  define SCOPY_CHAR_I(_dst, _escchar, _sc, _src, _si, _slen) \
+    _dst[0] = _escchar; \
+    _dst[1] = _sc
+#endif  /* !HANDLE_MULTIBYTE */
+
+#if defined (HANDLE_MULTIBYTE)
+#  define SCOPY_CHAR_M(_dst, _src, _srcend, _si) \
+    do \
+      { \
+	if (locale_mb_cur_max > 1) \
+	  { \
+	    mbstate_t state_bak; \
+	    size_t mblength; \
+	    int _i; \
+\
+	    _i = is_basic (*((_src) + (_si))); \
+	    if (_i) \
+	      mblength = 1; \
+	    else \
+	      { \
+		state_bak = state; \
+		mblength = mbrlen ((_src) + (_si), (_srcend) - ((_src) + (_si)), &state); \
+	      } \
+	    if (mblength == (size_t)-2 || mblength == (size_t)-1) \
+	      { \
+		state = state_bak; \
+		mblength = 1; \
+	      } \
+	    else \
+	      mblength = (mblength < 1) ? 1 : mblength; \
+\
+	    FASTCOPY(((_src) + (_si)), (_dst), mblength); \
+\
+	    (_dst) += mblength; \
+	    (_si) += mblength; \
+	  } \
+	else \
+	  { \
+	    *(_dst)++ = _src[(_si)]; \
+	    (_si)++; \
+	  } \
+      } \
+    while (0)
+#else
+#  define SCOPY_CHAR_M(_dst, _src, _srcend, _si) \
+	*(_dst)++ = _src[(_si)]; \
+	(_si)++
+#endif  /* !HANDLE_MULTIBYTE */
+
+#if HANDLE_MULTIBYTE
+#  define SADD_MBCHAR(_dst, _src, _si, _srcsize) \
+    do \
+      { \
+	if (locale_mb_cur_max > 1) \
+	  { \
+	    int i; \
+	    mbstate_t state_bak; \
+	    size_t mblength; \
+\
+	    i = is_basic (*((_src) + (_si))); \
+	    if (i) \
+	      mblength = 1; \
+	    else if (locale_utf8locale && (((_src)[_si] & 0x80) == 0)) \
+	      mblength = (_src)[_si] != 0; \
+	    else \
+	      { \
+		state_bak = state; \
+		mblength = mbrlen ((_src) + (_si), (_srcsize) - (_si), &state); \
+	      } \
+	    if (mblength == (size_t)-1 || mblength == (size_t)-2) \
+	      { \
+		state = state_bak; \
+		mblength = 1; \
+	      } \
+	    if (mblength < 1) \
+	      mblength = 1; \
+\
+	    _dst = (char *)xmalloc (mblength + 1); \
+	    for (i = 0; i < mblength; i++) \
+	      (_dst)[i] = (_src)[(_si)++]; \
+	    (_dst)[mblength] = '\0'; \
+\
+	    goto add_string; \
+	  } \
+      } \
+    while (0)
+
+#else
+#  define SADD_MBCHAR(_dst, _src, _si, _srcsize)
+#endif
+
+/* Watch out when using this -- it's just straight textual substitution */
+#if defined (HANDLE_MULTIBYTE)
+#  define SADD_MBQCHAR_BODY(_dst, _src, _si, _srcsize) \
+\
+	    int i; \
+	    mbstate_t state_bak; \
+	    size_t mblength; \
+\
+	    i = is_basic (*((_src) + (_si))); \
+	    if (i) \
+	      mblength = 1; \
+	    else if (locale_utf8locale && (((_src)[_si] & 0x80) == 0)) \
+	      mblength = (_src)[_si] != 0; \
+	    else \
+	      { \
+		state_bak = state; \
+		mblength = mbrlen ((_src) + (_si), (_srcsize) - (_si), &state); \
+	      } \
+	    if (mblength == (size_t)-1 || mblength == (size_t)-2) \
+	      { \
+		state = state_bak; \
+		mblength = 1; \
+	      } \
+	    if (mblength < 1) \
+	      mblength = 1; \
+\
+	    (_dst) = (char *)xmalloc (mblength + 2); \
+	    (_dst)[0] = CTLESC; \
+	    for (i = 0; i < mblength; i++) \
+	      (_dst)[i+1] = (_src)[(_si)++]; \
+	    (_dst)[mblength+1] = '\0'; \
+\
+	    goto add_string
+
+#  define SADD_MBCHAR_BODY(_dst, _src, _si, _srcsize) \
+\
+	    int i; \
+	    mbstate_t state_bak; \
+	    size_t mblength; \
+\
+	    i = is_basic (*((_src) + (_si))); \
+	    if (i) \
+	      mblength = 1; \
+	    else \
+	      { \
+		state_bak = state; \
+		mblength = mbrlen ((_src) + (_si), (_srcsize) - (_si), &state); \
+	      } \
+	    if (mblength == (size_t)-1 || mblength == (size_t)-2) \
+	      { \
+		state = state_bak; \
+		mblength = 1; \
+	      } \
+	    if (mblength < 1) \
+	      mblength = 1; \
+\
+	    (_dst) = (char *)xmalloc (mblength + 1); \
+	    for (i = 0; i < mblength; i++) \
+	      (_dst)[i+1] = (_src)[(_si)++]; \
+	    (_dst)[mblength+1] = '\0'; \
+\
+	    goto add_string
+
+#endif /* HANDLE_MULTIBYTE */
+#endif /* _SH_MBUTIL_H_ */
diff --git a/include/shtty.h b/include/shtty.h
new file mode 100644
index 0000000..fdf379b
--- /dev/null
+++ b/include/shtty.h
@@ -0,0 +1,112 @@
+/* Copyright (C) 1999-2020 Free Software Foundation, Inc. */
+
+/* This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * shtty.h -- include the correct system-dependent files to manipulate the
+ *	      tty
+ */
+
+#ifndef __SH_TTY_H_
+#define __SH_TTY_H_
+
+#include "stdc.h"
+
+#if defined (_POSIX_VERSION) && defined (HAVE_TERMIOS_H) && defined (HAVE_TCGETATTR) && !defined (TERMIOS_MISSING)
+#  define TERMIOS_TTY_DRIVER
+#else
+#  if defined (HAVE_TERMIO_H)
+#    define TERMIO_TTY_DRIVER
+#  else
+#    define NEW_TTY_DRIVER
+#  endif
+#endif
+
+/*
+ * The _POSIX_SOURCE define is to avoid multiple symbol definitions
+ * between sys/ioctl.h and termios.h.  Ditto for the test against SunOS4
+ * and the undefining of several symbols.
+ */
+      
+#ifdef TERMIOS_TTY_DRIVER
+#  if (defined (SunOS4) || defined (SunOS5)) && !defined (_POSIX_SOURCE)
+#    define _POSIX_SOURCE
+#  endif
+#  if defined (SunOS4)
+#    undef ECHO
+#    undef NOFLSH
+#    undef TOSTOP
+#  endif /* SunOS4 */
+#  include <termios.h>
+#  define TTYSTRUCT struct termios
+#else
+#  ifdef TERMIO_TTY_DRIVER
+#    include <termio.h>
+#    define TTYSTRUCT struct termio
+#  else	/* NEW_TTY_DRIVER */
+#    include <sgtty.h>
+#    define TTYSTRUCT struct sgttyb
+#  endif
+#endif
+
+/* Functions imported from lib/sh/shtty.c */
+
+/* Get and set terminal attributes for the file descriptor passed as
+   an argument. */
+extern int ttgetattr PARAMS((int, TTYSTRUCT *));
+extern int ttsetattr PARAMS((int, TTYSTRUCT *));
+
+/* Save and restore the terminal's attributes from static storage. */
+extern void ttsave PARAMS((void));
+extern void ttrestore PARAMS((void));
+
+/* Return the attributes corresponding to the file descriptor (0 or 1)
+   passed as an argument. */
+extern TTYSTRUCT *ttattr PARAMS((int));
+
+/* These functions only operate on the passed TTYSTRUCT; they don't
+   actually change anything with the kernel's current tty settings. */
+extern int tt_setonechar PARAMS((TTYSTRUCT *));
+extern int tt_setnoecho PARAMS((TTYSTRUCT *));
+extern int tt_seteightbit PARAMS((TTYSTRUCT *));
+extern int tt_setnocanon PARAMS((TTYSTRUCT *));
+extern int tt_setcbreak PARAMS((TTYSTRUCT *));
+
+/* These functions are all generally mutually exclusive.  If you call
+   more than one (bracketed with calls to ttsave and ttrestore, of
+   course), the right thing will happen, but more system calls will be
+   executed than absolutely necessary.  You can do all of this yourself
+   with the other functions; these are only conveniences. */
+
+/* These functions work with a given file descriptor and set terminal
+   attributes */
+extern int ttfd_onechar PARAMS((int, TTYSTRUCT *));
+extern int ttfd_noecho PARAMS((int, TTYSTRUCT *));
+extern int ttfd_eightbit PARAMS((int, TTYSTRUCT *));
+extern int ttfd_nocanon PARAMS((int, TTYSTRUCT *));
+
+extern int ttfd_cbreak PARAMS((int, TTYSTRUCT *));
+
+/* These functions work with fd 0 and the TTYSTRUCT saved with ttsave () */
+extern int ttonechar PARAMS((void));
+extern int ttnoecho PARAMS((void));
+extern int tteightbit PARAMS((void));
+extern int ttnocanon PARAMS((void));
+
+extern int ttcbreak PARAMS((void));
+
+#endif
diff --git a/include/stat-time.h b/include/stat-time.h
new file mode 100644
index 0000000..e04cc61
--- /dev/null
+++ b/include/stat-time.h
@@ -0,0 +1,214 @@
+/* stat-related time functions.
+
+   Copyright (C) 2005, 2007, 2009-2012 Free Software Foundation, Inc.
+
+   This program is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+/* Written by Paul Eggert.  */
+
+#ifndef STAT_TIME_H
+#define STAT_TIME_H 1
+
+#include <sys/stat.h>
+
+#if defined (TIME_H_DEFINES_STRUCT_TIMESPEC)
+#  include <time.h>
+#elif defined (SYS_TIME_H_DEFINES_STRUCT_TIMESPEC)
+#  include <sys/time.h>
+#elif defined (PTHREAD_H_DEFINES_STRUCT_TIMESPEC)
+#  include <pthread.h>
+#endif
+
+#ifndef HAVE_STRUCT_TIMESPEC
+struct timespec
+{
+  time_t tv_sec;
+  long int tv_nsec;
+};
+#endif
+
+/* STAT_TIMESPEC (ST, ST_XTIM) is the ST_XTIM member for *ST of type
+   struct timespec, if available.  If not, then STAT_TIMESPEC_NS (ST,
+   ST_XTIM) is the nanosecond component of the ST_XTIM member for *ST,
+   if available.  ST_XTIM can be st_atim, st_ctim, st_mtim, or st_birthtim
+   for access, status change, data modification, or birth (creation)
+   time respectively.
+
+   These macros are private to stat-time.h.  */
+#if defined HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC
+# ifdef TYPEOF_STRUCT_STAT_ST_ATIM_IS_STRUCT_TIMESPEC
+#  define STAT_TIMESPEC(st, st_xtim) ((st)->st_xtim)
+# else
+#  define STAT_TIMESPEC_NS(st, st_xtim) ((st)->st_xtim.tv_nsec)
+# endif
+#elif defined HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC
+# define STAT_TIMESPEC(st, st_xtim) ((st)->st_xtim##espec)
+#elif defined HAVE_STRUCT_STAT_ST_ATIMENSEC
+# define STAT_TIMESPEC_NS(st, st_xtim) ((st)->st_xtim##ensec)
+#elif defined HAVE_STRUCT_STAT_ST_ATIM_ST__TIM_TV_NSEC
+# define STAT_TIMESPEC_NS(st, st_xtim) ((st)->st_xtim.st__tim.tv_nsec)
+#endif
+
+/* Return the nanosecond component of *ST's access time.  */
+static inline long int
+get_stat_atime_ns (struct stat const *st)
+{
+# if defined STAT_TIMESPEC
+  return STAT_TIMESPEC (st, st_atim).tv_nsec;
+# elif defined STAT_TIMESPEC_NS
+  return STAT_TIMESPEC_NS (st, st_atim);
+# else
+  return 0;
+# endif
+}
+
+/* Return the nanosecond component of *ST's status change time.  */
+static inline long int
+get_stat_ctime_ns (struct stat const *st)
+{
+# if defined STAT_TIMESPEC
+  return STAT_TIMESPEC (st, st_ctim).tv_nsec;
+# elif defined STAT_TIMESPEC_NS
+  return STAT_TIMESPEC_NS (st, st_ctim);
+# else
+  return 0;
+# endif
+}
+
+/* Return the nanosecond component of *ST's data modification time.  */
+static inline long int
+get_stat_mtime_ns (struct stat const *st)
+{
+# if defined STAT_TIMESPEC
+  return STAT_TIMESPEC (st, st_mtim).tv_nsec;
+# elif defined STAT_TIMESPEC_NS
+  return STAT_TIMESPEC_NS (st, st_mtim);
+# else
+  return 0;
+# endif
+}
+
+/* Return the nanosecond component of *ST's birth time.  */
+static inline long int
+get_stat_birthtime_ns (struct stat const *st)
+{
+# if defined HAVE_STRUCT_STAT_ST_BIRTHTIMESPEC_TV_NSEC
+  return STAT_TIMESPEC (st, st_birthtim).tv_nsec;
+# elif defined HAVE_STRUCT_STAT_ST_BIRTHTIMENSEC
+  return STAT_TIMESPEC_NS (st, st_birthtim);
+# else
+  /* Avoid a "parameter unused" warning.  */
+  (void) st;
+  return 0;
+# endif
+}
+
+/* Return *ST's access time.  */
+static inline struct timespec
+get_stat_atime (struct stat const *st)
+{
+#ifdef STAT_TIMESPEC
+  return STAT_TIMESPEC (st, st_atim);
+#else
+  struct timespec t;
+  t.tv_sec = st->st_atime;
+  t.tv_nsec = get_stat_atime_ns (st);
+  return t;
+#endif
+}
+
+/* Return *ST's status change time.  */
+static inline struct timespec
+get_stat_ctime (struct stat const *st)
+{
+#ifdef STAT_TIMESPEC
+  return STAT_TIMESPEC (st, st_ctim);
+#else
+  struct timespec t;
+  t.tv_sec = st->st_ctime;
+  t.tv_nsec = get_stat_ctime_ns (st);
+  return t;
+#endif
+}
+
+/* Return *ST's data modification time.  */
+static inline struct timespec
+get_stat_mtime (struct stat const *st)
+{
+#ifdef STAT_TIMESPEC
+  return STAT_TIMESPEC (st, st_mtim);
+#else
+  struct timespec t;
+  t.tv_sec = st->st_mtime;
+  t.tv_nsec = get_stat_mtime_ns (st);
+  return t;
+#endif
+}
+
+static inline int
+timespec_cmp (struct timespec a, struct timespec b)
+{
+  return (a.tv_sec < b.tv_sec
+  	    ? -1
+	    : (a.tv_sec > b.tv_sec
+		 ? 1
+		 : (int) (a.tv_nsec - b.tv_nsec)));
+}
+
+/* Return *ST's birth time, if available; otherwise return a value
+   with tv_sec and tv_nsec both equal to -1.  */
+static inline struct timespec
+get_stat_birthtime (struct stat const *st)
+{
+  struct timespec t;
+
+#if (defined HAVE_STRUCT_STAT_ST_BIRTHTIMESPEC_TV_NSEC \
+     || defined HAVE_STRUCT_STAT_ST_BIRTHTIM_TV_NSEC)
+  t = STAT_TIMESPEC (st, st_birthtim);
+#elif defined HAVE_STRUCT_STAT_ST_BIRTHTIMENSEC
+  t.tv_sec = st->st_birthtime;
+  t.tv_nsec = st->st_birthtimensec;
+#elif (defined _WIN32 || defined __WIN32__) && ! defined __CYGWIN__
+  /* Native Windows platforms (but not Cygwin) put the "file creation
+     time" in st_ctime (!).  See
+     <http://msdn2.microsoft.com/de-de/library/14h5k7ff(VS.80).aspx>.  */
+  t.tv_sec = st->st_ctime;
+  t.tv_nsec = 0;
+#else
+  /* Birth time is not supported.  */
+  t.tv_sec = -1;
+  t.tv_nsec = -1;
+  /* Avoid a "parameter unused" warning.  */
+  (void) st;
+#endif
+
+#if (defined HAVE_STRUCT_STAT_ST_BIRTHTIMESPEC_TV_NSEC \
+     || defined HAVE_STRUCT_STAT_ST_BIRTHTIM_TV_NSEC \
+     || defined HAVE_STRUCT_STAT_ST_BIRTHTIMENSEC)
+  /* FreeBSD and NetBSD sometimes signal the absence of knowledge by
+     using zero.  Attempt to work around this problem.  Alas, this can
+     report failure even for valid time stamps.  Also, NetBSD
+     sometimes returns junk in the birth time fields; work around this
+     bug if it is detected.  */
+  if (! (t.tv_sec && 0 <= t.tv_nsec && t.tv_nsec < 1000000000))
+    {
+      t.tv_sec = -1;
+      t.tv_nsec = -1;
+    }
+#endif
+
+  return t;
+}
+
+#endif
diff --git a/include/stdc.h b/include/stdc.h
new file mode 100644
index 0000000..7b9282c
--- /dev/null
+++ b/include/stdc.h
@@ -0,0 +1,89 @@
+/* stdc.h -- macros to make source compile on both ANSI C and K&R C
+   compilers. */
+
+/* Copyright (C) 1993 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_STDC_H_)
+#define _STDC_H_
+
+/* Adapted from BSD /usr/include/sys/cdefs.h. */
+
+/* A function can be defined using prototypes and compile on both ANSI C
+   and traditional C compilers with something like this:
+	extern char *func PARAMS((char *, char *, int)); */
+
+#if !defined (PARAMS)
+#  if defined (__STDC__) || defined (__GNUC__) || defined (__cplusplus) || defined (PROTOTYPES)
+#    define PARAMS(protos) protos
+#  else 
+#    define PARAMS(protos) ()
+#  endif
+#endif
+
+/* Fortify, at least, has trouble with this definition */
+#if defined (HAVE_STRINGIZE)
+#  define CPP_STRING(x) #x
+#else
+#  define CPP_STRING(x) "x"
+#endif
+
+#if !defined (__STDC__)
+
+#if defined (__GNUC__)		/* gcc with -traditional */
+#  if !defined (signed)
+#    define signed __signed
+#  endif
+#  if !defined (volatile)
+#    define volatile __volatile
+#  endif
+#else /* !__GNUC__ */
+#  if !defined (inline)
+#    define inline
+#  endif
+#  if !defined (signed)
+#    define signed
+#  endif
+#  if !defined (volatile)
+#    define volatile
+#  endif
+#endif /* !__GNUC__ */
+
+#endif /* !__STDC__ */
+
+#ifndef __attribute__
+#  if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 8)
+#    define __attribute__(x)
+#  endif
+#endif
+
+/* For those situations when gcc handles inlining a particular function but
+   other compilers complain. */
+#ifdef __GNUC__
+#  define INLINE inline
+#else
+#  define INLINE
+#endif
+
+#if defined (PREFER_STDARG)
+#  define SH_VA_START(va, arg)  va_start(va, arg)
+#else
+#  define SH_VA_START(va, arg)  va_start(va)
+#endif
+
+#endif /* !_STDC_H_ */
diff --git a/include/systimes.h b/include/systimes.h
new file mode 100644
index 0000000..aefcab7
--- /dev/null
+++ b/include/systimes.h
@@ -0,0 +1,55 @@
+/* Copyright (C) 1991-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ *	POSIX Standard: 4.5.2 Process Times	<sys/times.h>
+ */
+
+/*
+ * If we don't have a standard system clock_t type, this must be included
+ * after config.h
+ */
+
+#ifndef	_BASH_SYSTIMES_H
+#define _BASH_SYSTIMES_H	1
+
+#if defined (HAVE_SYS_TIMES_H)
+#  include <sys/times.h>
+#else /* !HAVE_SYS_TIMES_H */
+
+#include <stdc.h>
+
+/* Structure describing CPU time used by a process and its children.  */
+struct tms
+  {
+    clock_t tms_utime;		/* User CPU time.  */
+    clock_t tms_stime;		/* System CPU time.  */
+
+    clock_t tms_cutime;		/* User CPU time of dead children.  */
+    clock_t tms_cstime;		/* System CPU time of dead children.  */
+  };
+
+/* Store the CPU time used by this process and all its
+   dead descendants in BUFFER.
+   Return the elapsed real time from an arbitrary point in the
+   past (the bash emulation uses the epoch), or (clock_t) -1 for
+   errors.  All times are in CLK_TCKths of a second.  */
+extern clock_t times PARAMS((struct tms *buffer));
+
+#endif /* !HAVE_SYS_TIMES_H */
+#endif /* _BASH_SYSTIMES_H */
diff --git a/include/typemax.h b/include/typemax.h
new file mode 100644
index 0000000..9853d56
--- /dev/null
+++ b/include/typemax.h
@@ -0,0 +1,131 @@
+/* typemax.h -- encapsulate max values for long, long long, etc. */
+
+/* Copyright (C) 2001 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * NOTE:  This should be included after config.h, limits.h, stdint.h, and
+ *	  inttypes.h
+ */
+
+#ifndef _SH_TYPEMAX_H
+#define _SH_TYPEMAX_H
+
+#ifndef CHAR_BIT
+#  define CHAR_BIT 8
+#endif
+
+/* Nonzero if the integer type T is signed.  */
+#ifndef TYPE_SIGNED
+#  define TYPE_SIGNED(t)	(! ((t) 0 < (t) -1))
+#endif
+
+#ifndef TYPE_SIGNED_MAGNITUDE
+#  define TYPE_SIGNED_MAGNITUDE(t) ((t) ~ (t) 0 < (t) -1)
+#endif
+
+#ifndef TYPE_WIDTH
+#  define TYPE_WIDTH(t) (sizeof (t) * CHAR_BIT)
+#endif
+
+#ifndef TYPE_MINIMUM
+#  define TYPE_MINIMUM(t) ((t) ~ TYPE_MAXIMUM (t))
+#endif
+
+#ifndef TYPE_MAXIMUM
+#  define TYPE_MAXIMUM(t)  \
+  ((t) (! TYPE_SIGNED (t) \
+        ? (t) -1 \
+        : ((((t) 1 << (TYPE_WIDTH (t) - 2)) - 1) * 2 + 1)))
+#endif
+
+#ifdef HAVE_LONG_LONG
+#  ifndef LLONG_MAX
+#    define LLONG_MAX   TYPE_MAXIMUM(long long int)
+#    define LLONG_MIN	TYPE_MINIMUM(long long int)
+#  endif
+#  ifndef ULLONG_MAX
+#    define ULLONG_MAX  TYPE_MAXIMUM(unsigned long long int)
+#  endif
+#endif
+
+#ifndef ULONG_MAX
+#  define ULONG_MAX	((unsigned long) ~(unsigned long) 0)
+#endif
+
+#ifndef LONG_MAX
+#  define LONG_MAX	((long int) (ULONG_MAX >> 1))
+#  define LONG_MIN	((long int) (-LONG_MAX - 1L))
+#endif
+
+#ifndef INT_MAX		/* ouch */
+#  define INT_MAX	TYPE_MAXIMUM(int)
+#  define INT_MIN	TYPE_MINIMUM(int)
+#  define UINT_MAX	((unsigned int) ~(unsigned int)0)
+#endif
+
+/* workaround for gcc bug in versions < 2.7 */
+#if defined (HAVE_LONG_LONG) && __GNUC__ == 2 && __GNUC_MINOR__ < 7
+static const unsigned long long int maxquad = ULLONG_MAX;
+#  undef ULLONG_MAX
+#  define ULLONG_MAX maxquad
+#endif
+
+#if !defined (INTMAX_MAX) || !defined (INTMAX_MIN)
+
+#if SIZEOF_INTMAX_T == SIZEOF_LONG_LONG
+#  define INTMAX_MAX	LLONG_MAX
+#  define INTMAX_MIN	LLONG_MIN
+#elif SIZEOF_INTMAX_T == SIZEOF_LONG
+#  define INTMAX_MAX	LONG_MAX
+#  define INTMAX_MIN	LONG_MIN
+#else
+#  define INTMAX_MAX	INT_MAX
+#  define INTMAX_MIN	INT_MIN
+#endif
+
+#endif
+
+#ifndef SSIZE_MAX
+#  define SSIZE_MAX	32767		/* POSIX minimum max */
+#endif
+
+#ifndef SIZE_MAX
+#  define SIZE_MAX	65535		/* POSIX minimum max */
+#endif
+
+#ifndef sh_imaxabs
+#  define sh_imaxabs(x)	(((x) >= 0) ? (x) : -(x))
+#endif
+
+/* Handle signed arithmetic overflow and underflow.  Have to do it this way
+   to avoid compilers optimizing out simpler overflow checks. */
+
+/* Make sure that a+b does not exceed MAXV or is smaller than MINV (if b < 0).
+   Assumes that b > 0 if a > 0 and b < 0 if a < 0 */
+#define ADDOVERFLOW(a,b,minv,maxv) \
+	((((a) > 0) && ((b) > ((maxv) - (a)))) || \
+	 (((a) < 0) && ((b) < ((minv) - (a)))))
+
+/* Make sure that a-b is not smaller than MINV or exceeds MAXV (if b < 0).
+   Assumes that b > 0 if a > 0 and b < 0 if a < 0 */
+#define SUBOVERFLOW(a,b,minv,maxv) \
+	((((b) > 0) && ((a) < ((minv) + (b)))) || \
+	 (((b) < 0) && ((a) > ((maxv) + (b)))))
+
+#endif /* _SH_TYPEMAX_H */
diff --git a/include/unionwait.h b/include/unionwait.h
new file mode 100644
index 0000000..b1b4dfa
--- /dev/null
+++ b/include/unionwait.h
@@ -0,0 +1,98 @@
+/* unionwait.h -- definitions for using a `union wait' on systems without
+   one. */
+
+/* Copyright (C) 1996 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _UNIONWAIT_H
+#define _UNIONWAIT_H
+
+#if !defined (WORDS_BIGENDIAN)
+union wait
+  {
+    int	w_status;		/* used in syscall */
+
+    /* Terminated process status. */
+    struct
+      {
+	unsigned short
+	  w_Termsig  : 7,	/* termination signal */
+	  w_Coredump : 1,	/* core dump indicator */
+	  w_Retcode  : 8,	/* exit code if w_termsig==0 */
+	  w_Fill1    : 16;	/* high 16 bits unused */
+      } w_T;
+
+    /* Stopped process status.  Returned
+       only for traced children unless requested
+       with the WUNTRACED option bit. */
+    struct
+      {
+	unsigned short
+	  w_Stopval : 8,	/* == W_STOPPED if stopped */
+	  w_Stopsig : 8,	/* actually zero on XENIX */
+	  w_Fill2   : 16;	/* high 16 bits unused */
+      } w_S;
+  };
+
+#else  /* WORDS_BIGENDIAN */
+
+/* This is for big-endian machines like the IBM RT, HP 9000, or Sun-3 */
+
+union wait
+  {
+    int	w_status;		/* used in syscall */
+
+    /* Terminated process status. */
+    struct
+      {
+	unsigned short w_Fill1    : 16;	/* high 16 bits unused */
+	unsigned       w_Retcode  : 8;	/* exit code if w_termsig==0 */
+	unsigned       w_Coredump : 1;	/* core dump indicator */
+	unsigned       w_Termsig  : 7;	/* termination signal */
+      } w_T;
+
+    /* Stopped process status.  Returned
+       only for traced children unless requested
+       with the WUNTRACED option bit. */
+    struct
+      {
+	unsigned short w_Fill2   : 16;	/* high 16 bits unused */
+	unsigned       w_Stopsig : 8;	/* signal that stopped us */
+	unsigned       w_Stopval : 8;	/* == W_STOPPED if stopped */
+      } w_S;
+  };
+
+#endif /* WORDS_BIGENDIAN */
+
+#define w_termsig  w_T.w_Termsig
+#define w_coredump w_T.w_Coredump
+#define w_retcode  w_T.w_Retcode
+#define w_stopval  w_S.w_Stopval
+#define w_stopsig  w_S.w_Stopsig
+
+#define WSTOPPED       0177
+#define WIFSTOPPED(x)  ((x).w_stopval == WSTOPPED)
+#define WIFEXITED(x)   ((x).w_stopval != WSTOPPED && (x).w_termsig == 0)
+#define WIFSIGNALED(x) ((x).w_stopval != WSTOPPED && (x).w_termsig != 0)
+
+#define WTERMSIG(x)    ((x).w_termsig)
+#define WSTOPSIG(x)    ((x).w_stopsig)
+#define WEXITSTATUS(x) ((x).w_retcode)
+#define WIFCORED(x)    ((x).w_coredump)
+
+#endif /* _UNIONWAIT_H */
diff --git a/input.c b/input.c
new file mode 100644
index 0000000..c57e81c
--- /dev/null
+++ b/input.c
@@ -0,0 +1,677 @@
+/* input.c -- functions to perform buffered input with synchronization. */
+
+/* Copyright (C) 1992-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include "bashtypes.h"
+#if !defined (_MINIX) && defined (HAVE_SYS_FILE_H)
+#  include <sys/file.h>
+#endif
+#include "filecntl.h"
+#include "posixstat.h"
+#include <stdio.h>
+#include <errno.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "bashansi.h"
+#include "bashintl.h"
+
+#include "shell.h"
+#include "input.h"
+#include "externs.h"
+#include "trap.h"
+
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+#if defined (EAGAIN)
+#  define X_EAGAIN EAGAIN
+#else
+#  define X_EAGAIN -99
+#endif
+
+#if defined (EWOULDBLOCK)
+#  define X_EWOULDBLOCK EWOULDBLOCK
+#else
+#  define X_EWOULDBLOCK -99
+#endif
+
+extern void termsig_handler PARAMS((int));
+
+/* Functions to handle reading input on systems that don't restart read(2)
+   if a signal is received. */
+
+static char localbuf[1024];
+static int local_index = 0, local_bufused = 0;
+
+/* Posix and USG systems do not guarantee to restart read () if it is
+   interrupted by a signal.  We do the read ourselves, and restart it
+   if it returns EINTR. */
+int
+getc_with_restart (stream)
+     FILE *stream;
+{
+  unsigned char uc;
+
+  CHECK_TERMSIG;
+
+  /* Try local buffering to reduce the number of read(2) calls. */
+  if (local_index == local_bufused || local_bufused == 0)
+    {
+      while (1)
+	{
+	  QUIT;
+	  run_pending_traps ();
+
+	  local_bufused = read (fileno (stream), localbuf, sizeof(localbuf));
+	  if (local_bufused > 0)
+	    break;
+	  else if (local_bufused == 0)
+	    {
+	      local_index = 0;
+	      return EOF;
+	    }
+	  else if (errno == X_EAGAIN || errno == X_EWOULDBLOCK)
+	    {
+	      if (sh_unset_nodelay_mode (fileno (stream)) < 0)
+		{
+		  sys_error (_("cannot reset nodelay mode for fd %d"), fileno (stream));
+		  local_index = local_bufused = 0;
+		  return EOF;
+		}
+	      continue;
+	    }
+	  else if (errno != EINTR)
+	    {
+	      local_index = local_bufused = 0;
+	      return EOF;
+	    }
+	  else if (interrupt_state || terminating_signal)	/* QUIT; */
+	    local_index = local_bufused = 0;
+	}
+      local_index = 0;
+    }
+  uc = localbuf[local_index++];
+  return uc;
+}
+
+int
+ungetc_with_restart (c, stream)
+     int c;
+     FILE *stream;
+{
+  if (local_index == 0 || c == EOF)
+    return EOF;
+  localbuf[--local_index] = c;
+  return c;
+}
+
+#if defined (BUFFERED_INPUT)
+
+/* A facility similar to stdio, but input-only. */
+
+#if defined (USING_BASH_MALLOC)
+#  define MAX_INPUT_BUFFER_SIZE	8172
+#else
+#  define MAX_INPUT_BUFFER_SIZE	8192
+#endif
+
+#if !defined (SEEK_CUR)
+#  define SEEK_CUR 1
+#endif /* !SEEK_CUR */
+
+#ifdef max
+#  undef max
+#endif
+#define max(a, b)	(((a) > (b)) ? (a) : (b))
+#ifdef min
+#  undef min
+#endif
+#define min(a, b)	((a) > (b) ? (b) : (a))
+
+int bash_input_fd_changed;
+
+/* This provides a way to map from a file descriptor to the buffer
+   associated with that file descriptor, rather than just the other
+   way around.  This is needed so that buffers are managed properly
+   in constructs like 3<&4.  buffers[x]->b_fd == x -- that is how the
+   correspondence is maintained. */
+static BUFFERED_STREAM **buffers = (BUFFERED_STREAM **)NULL;
+static int nbuffers;
+
+#define ALLOCATE_BUFFERS(n) \
+	do { if ((n) >= nbuffers) allocate_buffers (n); } while (0)
+
+/* Make sure `buffers' has at least N elements. */
+static void
+allocate_buffers (n)
+     int n;
+{
+  register int i, orig_nbuffers;
+
+  orig_nbuffers = nbuffers;
+  nbuffers = n + 20;
+  buffers = (BUFFERED_STREAM **)xrealloc
+    (buffers, nbuffers * sizeof (BUFFERED_STREAM *));
+
+  /* Zero out the new buffers. */
+  for (i = orig_nbuffers; i < nbuffers; i++)
+    buffers[i] = (BUFFERED_STREAM *)NULL;
+}
+
+/* Construct and return a BUFFERED_STREAM corresponding to file descriptor
+   FD, using BUFFER. */
+static BUFFERED_STREAM *
+make_buffered_stream (fd, buffer, bufsize)
+     int fd;
+     char *buffer;
+     size_t bufsize;
+{
+  BUFFERED_STREAM *bp;
+
+  bp = (BUFFERED_STREAM *)xmalloc (sizeof (BUFFERED_STREAM));
+  ALLOCATE_BUFFERS (fd);
+  buffers[fd] = bp;
+  bp->b_fd = fd;
+  bp->b_buffer = buffer;
+  bp->b_size = bufsize;
+  bp->b_used = bp->b_inputp = bp->b_flag = 0;
+  if (bufsize == 1)
+    bp->b_flag |= B_UNBUFF;
+  if (O_TEXT && (fcntl (fd, F_GETFL) & O_TEXT) != 0)
+    bp->b_flag |= B_TEXT;
+  return (bp);
+}
+
+/* Allocate a new BUFFERED_STREAM, copy BP to it, and return the new copy. */
+static BUFFERED_STREAM *
+copy_buffered_stream (bp)
+     BUFFERED_STREAM *bp;
+{
+  BUFFERED_STREAM *nbp;
+
+  if (!bp)
+    return ((BUFFERED_STREAM *)NULL);
+
+  nbp = (BUFFERED_STREAM *)xmalloc (sizeof (BUFFERED_STREAM));
+  xbcopy ((char *)bp, (char *)nbp, sizeof (BUFFERED_STREAM));
+  return (nbp);
+}
+
+int
+set_bash_input_fd (fd)
+     int fd;
+{
+  if (bash_input.type == st_bstream)
+    bash_input.location.buffered_fd = fd;
+  else if (interactive_shell == 0)
+    default_buffered_input = fd;
+  return 0;
+}
+
+int
+fd_is_bash_input (fd)
+     int fd;
+{
+  if (bash_input.type == st_bstream && bash_input.location.buffered_fd == fd)
+    return 1;
+  else if (interactive_shell == 0 && default_buffered_input == fd)
+    return 1;
+  return 0;
+}
+
+/* Save the buffered stream corresponding to file descriptor FD (which bash
+   is using to read input) to a buffered stream associated with NEW_FD.  If
+   NEW_FD is -1, a new file descriptor is allocated with fcntl.  The new
+   file descriptor is returned on success, -1 on error. */
+int
+save_bash_input (fd, new_fd)
+     int fd, new_fd;
+{
+  int nfd;
+
+  /* Sync the stream so we can re-read from the new file descriptor.  We
+     might be able to avoid this by copying the buffered stream verbatim
+     to the new file descriptor. */
+  if (buffers[fd])
+    sync_buffered_stream (fd);
+
+  /* Now take care of duplicating the file descriptor that bash is
+     using for input, so we can reinitialize it later. */
+  nfd = (new_fd == -1) ? fcntl (fd, F_DUPFD, 10) : new_fd;
+  if (nfd == -1)
+    {
+      if (fcntl (fd, F_GETFD, 0) == 0)
+	sys_error (_("cannot allocate new file descriptor for bash input from fd %d"), fd);
+      return -1;
+    }
+
+  if (nfd < nbuffers && buffers[nfd])
+    {
+      /* What's this?  A stray buffer without an associated open file
+	 descriptor?  Free up the buffer and report the error. */
+      internal_error (_("save_bash_input: buffer already exists for new fd %d"), nfd);
+      if (buffers[nfd]->b_flag & B_SHAREDBUF)
+	buffers[nfd]->b_buffer = (char *)NULL;
+      free_buffered_stream (buffers[nfd]);
+    }
+
+  /* Reinitialize bash_input.location. */
+  if (bash_input.type == st_bstream)
+    {
+      bash_input.location.buffered_fd = nfd;
+      fd_to_buffered_stream (nfd);
+      close_buffered_fd (fd);	/* XXX */
+    }
+  else
+    /* If the current input type is not a buffered stream, but the shell
+       is not interactive and therefore using a buffered stream to read
+       input (e.g. with an `eval exec 3>output' inside a script), note
+       that the input fd has been changed.  pop_stream() looks at this
+       value and adjusts the input fd to the new value of
+       default_buffered_input accordingly. */
+    bash_input_fd_changed++;
+
+  if (default_buffered_input == fd)
+    default_buffered_input = nfd;
+
+  SET_CLOSE_ON_EXEC (nfd);
+  return nfd;
+}
+
+/* Check that file descriptor FD is not the one that bash is currently
+   using to read input from a script.  FD is about to be duplicated onto,
+   which means that the kernel will close it for us.  If FD is the bash
+   input file descriptor, we need to seek backwards in the script (if
+   possible and necessary -- scripts read from stdin are still unbuffered),
+   allocate a new file descriptor to use for bash input, and re-initialize
+   the buffered stream.  Make sure the file descriptor used to save bash
+   input is set close-on-exec. Returns 0 on success, -1 on failure.  This
+   works only if fd is > 0 -- if fd == 0 and bash is reading input from
+   fd 0, sync_buffered_stream is used instead, to cooperate with input
+   redirection (look at redir.c:add_undo_redirect()). */
+int
+check_bash_input (fd)
+     int fd;
+{
+  if (fd_is_bash_input (fd))
+    {
+      if (fd > 0)
+	return ((save_bash_input (fd, -1) == -1) ? -1 : 0);
+      else if (fd == 0)
+        return ((sync_buffered_stream (fd) == -1) ? -1 : 0);
+    }
+  return 0;
+}
+      
+/* This is the buffered stream analogue of dup2(fd1, fd2).  The
+   BUFFERED_STREAM corresponding to fd2 is deallocated, if one exists.
+   BUFFERS[fd1] is copied to BUFFERS[fd2].  This is called by the
+   redirect code for constructs like 4<&0 and 3</etc/rc.local. */
+int
+duplicate_buffered_stream (fd1, fd2)
+     int fd1, fd2;
+{
+  int is_bash_input, m;
+
+  if (fd1 == fd2)
+    return 0;
+
+  m = max (fd1, fd2);
+  ALLOCATE_BUFFERS (m);
+
+  /* If FD2 is the file descriptor bash is currently using for shell input,
+     we need to do some extra work to make sure that the buffered stream
+     actually exists (it might not if fd1 was not active, and the copy
+     didn't actually do anything). */
+  is_bash_input = (bash_input.type == st_bstream) &&
+		  (bash_input.location.buffered_fd == fd2);
+
+  if (buffers[fd2])
+    {
+      /* If the two objects share the same b_buffer, don't free it. */
+      if (buffers[fd1] && buffers[fd1]->b_buffer && buffers[fd1]->b_buffer == buffers[fd2]->b_buffer)
+	buffers[fd2] = (BUFFERED_STREAM *)NULL;
+      /* If this buffer is shared with another fd, don't free the buffer */
+      else if (buffers[fd2]->b_flag & B_SHAREDBUF)
+	{
+	  buffers[fd2]->b_buffer = (char *)NULL;
+	  free_buffered_stream (buffers[fd2]);
+	}
+      else
+	free_buffered_stream (buffers[fd2]);
+    }
+  buffers[fd2] = copy_buffered_stream (buffers[fd1]);
+  if (buffers[fd2])
+    buffers[fd2]->b_fd = fd2;
+
+  if (is_bash_input)
+    {
+      if (!buffers[fd2])
+	fd_to_buffered_stream (fd2);
+      buffers[fd2]->b_flag |= B_WASBASHINPUT;
+    }
+
+  if (fd_is_bash_input (fd1) || (buffers[fd1] && (buffers[fd1]->b_flag & B_SHAREDBUF)))
+    buffers[fd2]->b_flag |= B_SHAREDBUF;
+
+  return (fd2);
+}
+
+/* Return 1 if a seek on FD will succeed. */
+#define fd_is_seekable(fd) (lseek ((fd), 0L, SEEK_CUR) >= 0)
+
+/* Take FD, a file descriptor, and create and return a buffered stream
+   corresponding to it.  If something is wrong and the file descriptor
+   is invalid, return a NULL stream. */
+BUFFERED_STREAM *
+fd_to_buffered_stream (fd)
+     int fd;
+{
+  char *buffer;
+  size_t size;
+  struct stat sb;
+
+  if (fstat (fd, &sb) < 0)
+    {
+      close (fd);
+      return ((BUFFERED_STREAM *)NULL);
+    }
+
+  size = (fd_is_seekable (fd)) ? min (sb.st_size, MAX_INPUT_BUFFER_SIZE) : 1;
+  if (size == 0)
+    size = 1;
+  buffer = (char *)xmalloc (size);
+
+  return (make_buffered_stream (fd, buffer, size));
+}
+
+/* Return a buffered stream corresponding to FILE, a file name. */
+BUFFERED_STREAM *
+open_buffered_stream (file)
+     char *file;
+{
+  int fd;
+
+  fd = open (file, O_RDONLY);
+  return ((fd >= 0) ? fd_to_buffered_stream (fd) : (BUFFERED_STREAM *)NULL);
+}
+
+/* Deallocate a buffered stream and free up its resources.  Make sure we
+   zero out the slot in BUFFERS that points to BP. */
+void
+free_buffered_stream (bp)
+     BUFFERED_STREAM *bp;
+{
+  int n;
+
+  if (!bp)
+    return;
+
+  n = bp->b_fd;
+  if (bp->b_buffer)
+    free (bp->b_buffer);
+  free (bp);
+  buffers[n] = (BUFFERED_STREAM *)NULL;
+}
+
+/* Close the file descriptor associated with BP, a buffered stream, and free
+   up the stream.  Return the status of closing BP's file descriptor. */
+int
+close_buffered_stream (bp)
+     BUFFERED_STREAM *bp;
+{
+  int fd;
+
+  if (!bp)
+    return (0);
+  fd = bp->b_fd;
+  if (bp->b_flag & B_SHAREDBUF)
+    bp->b_buffer = (char *)NULL;
+  free_buffered_stream (bp);
+  return (close (fd));
+}
+
+/* Deallocate the buffered stream associated with file descriptor FD, and
+   close FD.  Return the status of the close on FD. */
+int
+close_buffered_fd (fd)
+     int fd;
+{
+  if (fd < 0)
+    {
+      errno = EBADF;
+      return -1;
+    }
+  if (fd >= nbuffers || !buffers || !buffers[fd])
+    return (close (fd));
+  return (close_buffered_stream (buffers[fd]));
+}
+
+/* Make the BUFFERED_STREAM associated with buffers[FD] be BP, and return
+   the old BUFFERED_STREAM. */
+BUFFERED_STREAM *
+set_buffered_stream (fd, bp)
+     int fd;
+     BUFFERED_STREAM *bp;
+{
+  BUFFERED_STREAM *ret;
+
+  ret = buffers[fd];
+  buffers[fd] = bp;
+  return ret;
+}
+
+/* Read a buffer full of characters from BP, a buffered stream. */
+static int
+b_fill_buffer (bp)
+     BUFFERED_STREAM *bp;
+{
+  ssize_t nr;
+  off_t o;
+
+  CHECK_TERMSIG;
+  /* In an environment where text and binary files are treated differently,
+     compensate for lseek() on text files returning an offset different from
+     the count of characters read() returns.  Text-mode streams have to be
+     treated as unbuffered. */
+  if ((bp->b_flag & (B_TEXT | B_UNBUFF)) == B_TEXT)
+    {
+      o = lseek (bp->b_fd, 0, SEEK_CUR);
+      nr = zread (bp->b_fd, bp->b_buffer, bp->b_size);
+      if (nr > 0 && nr < lseek (bp->b_fd, 0, SEEK_CUR) - o)
+	{
+	  lseek (bp->b_fd, o, SEEK_SET);
+	  bp->b_flag |= B_UNBUFF;
+	  bp->b_size = 1;
+	  nr = zread (bp->b_fd, bp->b_buffer, bp->b_size);
+	}
+    }
+  else
+    nr = zread (bp->b_fd, bp->b_buffer, bp->b_size);
+  if (nr <= 0)
+    {
+      bp->b_used = bp->b_inputp = 0;
+      bp->b_buffer[0] = 0;
+      if (nr == 0)
+	bp->b_flag |= B_EOF;
+      else
+	bp->b_flag |= B_ERROR;
+      return (EOF);
+    }
+
+  bp->b_used = nr;
+  bp->b_inputp = 0;
+  return (bp->b_buffer[bp->b_inputp++] & 0xFF);
+}
+
+/* Get a character from buffered stream BP. */
+#define bufstream_getc(bp) \
+  (bp->b_inputp == bp->b_used || !bp->b_used) \
+  		? b_fill_buffer (bp) \
+		: bp->b_buffer[bp->b_inputp++] & 0xFF
+
+/* Push C back onto buffered stream BP. */
+static int
+bufstream_ungetc(c, bp)
+     int c;
+     BUFFERED_STREAM *bp;
+{
+  if (c == EOF || bp == 0 || bp->b_inputp == 0)
+    return (EOF);
+
+  bp->b_buffer[--bp->b_inputp] = c;
+  return (c);
+}
+
+/* Seek backwards on file BFD to synchronize what we've read so far
+   with the underlying file pointer. */
+int
+sync_buffered_stream (bfd)
+     int bfd;
+{
+  BUFFERED_STREAM *bp;
+  off_t chars_left;
+
+  if (buffers == 0 || (bp = buffers[bfd]) == 0)
+    return (-1);
+
+  chars_left = bp->b_used - bp->b_inputp;
+  if (chars_left)
+    lseek (bp->b_fd, -chars_left, SEEK_CUR);
+  bp->b_used = bp->b_inputp = 0;
+  return (0);
+}
+
+int
+buffered_getchar ()
+{
+  CHECK_TERMSIG;
+
+  if (bash_input.location.buffered_fd < 0 || buffers[bash_input.location.buffered_fd] == 0)
+    return EOF;
+
+#if !defined (DJGPP)
+  return (bufstream_getc (buffers[bash_input.location.buffered_fd]));
+#else
+  /* On DJGPP, ignore \r. */
+  int ch;
+  while ((ch = bufstream_getc (buffers[bash_input.location.buffered_fd])) == '\r')
+    ;
+  return ch;
+#endif
+}
+
+int
+buffered_ungetchar (c)
+     int c;
+{
+  return (bufstream_ungetc (c, buffers[bash_input.location.buffered_fd]));
+}
+
+/* Make input come from file descriptor BFD through a buffered stream. */
+void
+with_input_from_buffered_stream (bfd, name)
+     int bfd;
+     char *name;
+{
+  INPUT_STREAM location;
+  BUFFERED_STREAM *bp;
+
+  location.buffered_fd = bfd;
+  /* Make sure the buffered stream exists. */
+  bp = fd_to_buffered_stream (bfd);
+  init_yy_io (bp == 0 ? return_EOF : buffered_getchar,
+	      buffered_ungetchar, st_bstream, name, location);
+}
+
+#if defined (TEST)
+void *
+xmalloc(s)
+int s;
+{
+	return (malloc (s));
+}
+
+void *
+xrealloc(s, size)
+char	*s;
+int	size;
+{
+	if (!s)
+		return(malloc (size));
+	else
+		return(realloc (s, size));
+}
+
+void
+init_yy_io ()
+{
+}
+
+process(bp)
+BUFFERED_STREAM *bp;
+{
+	int c;
+
+	while ((c = bufstream_getc(bp)) != EOF)
+		putchar(c);
+}
+
+BASH_INPUT bash_input;
+
+struct stat dsb;		/* can be used from gdb */
+
+/* imitate /bin/cat */
+main(argc, argv)
+int	argc;
+char	**argv;
+{
+	register int i;
+	BUFFERED_STREAM *bp;
+
+	if (argc == 1) {
+		bp = fd_to_buffered_stream (0);
+		process(bp);
+		exit(0);
+	}
+	for (i = 1; i < argc; i++) {
+		if (argv[i][0] == '-' && argv[i][1] == '\0') {
+			bp = fd_to_buffered_stream (0);
+			if (!bp)
+				continue;
+			process(bp);
+			free_buffered_stream (bp);
+		} else {
+			bp = open_buffered_stream (argv[i]);
+			if (!bp)
+				continue;
+			process(bp);
+			close_buffered_stream (bp);
+		}
+	}
+	exit(0);
+}
+#endif /* TEST */
+#endif /* BUFFERED_INPUT */
diff --git a/input.h b/input.h
new file mode 100644
index 0000000..cb3eee4
--- /dev/null
+++ b/input.h
@@ -0,0 +1,135 @@
+/* input.h -- Structures and unions used for reading input. */
+
+/* Copyright (C) 1993-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_INPUT_H_)
+#define _INPUT_H_
+
+#include "stdc.h"
+
+/* Function pointers can be declared as (Function *)foo. */
+#if !defined (_FUNCTION_DEF)
+#  define _FUNCTION_DEF
+typedef int Function ();
+typedef void VFunction ();
+typedef char *CPFunction ();		/* no longer used */
+typedef char **CPPFunction ();		/* no longer used */
+#endif /* _FUNCTION_DEF */
+
+typedef int sh_cget_func_t PARAMS((void));		/* sh_ivoidfunc_t */
+typedef int sh_cunget_func_t PARAMS((int));	/* sh_intfunc_t */
+
+enum stream_type {st_none, st_stdin, st_stream, st_string, st_bstream};
+
+#if defined (BUFFERED_INPUT)
+
+/* Possible values for b_flag. */
+#undef B_EOF
+#undef B_ERROR		/* There are some systems with this define */
+#undef B_UNBUFF
+
+#define B_EOF		0x01
+#define B_ERROR		0x02
+#define B_UNBUFF	0x04
+#define B_WASBASHINPUT	0x08
+#define B_TEXT		0x10
+#define B_SHAREDBUF	0x20	/* shared input buffer */
+
+/* A buffered stream.  Like a FILE *, but with our own buffering and
+   synchronization.  Look in input.c for the implementation. */
+typedef struct BSTREAM
+{
+  int	 b_fd;
+  char	*b_buffer;		/* The buffer that holds characters read. */
+  size_t b_size;		/* How big the buffer is. */
+  size_t b_used;		/* How much of the buffer we're using, */
+  int	 b_flag;		/* Flag values. */
+  size_t b_inputp;		/* The input pointer, index into b_buffer. */
+} BUFFERED_STREAM;
+
+#if 0
+extern BUFFERED_STREAM **buffers;
+#endif
+
+extern int default_buffered_input;
+extern int bash_input_fd_changed;
+
+#endif /* BUFFERED_INPUT */
+
+typedef union {
+  FILE *file;
+  char *string;
+#if defined (BUFFERED_INPUT)
+  int buffered_fd;
+#endif
+} INPUT_STREAM;
+
+typedef struct {
+  enum stream_type type;
+  char *name;
+  INPUT_STREAM location;
+  sh_cget_func_t *getter;
+  sh_cunget_func_t *ungetter;
+} BASH_INPUT;
+
+extern BASH_INPUT bash_input;
+
+/* Functions from parse.y whose use directly or indirectly depends on the
+   definitions in this file. */
+extern void initialize_bash_input PARAMS((void));
+extern void init_yy_io PARAMS((sh_cget_func_t *, sh_cunget_func_t *, enum stream_type, const char *, INPUT_STREAM));
+extern char *yy_input_name PARAMS((void));
+extern void with_input_from_stdin PARAMS((void));
+extern void with_input_from_string PARAMS((char *, const char *));
+extern void with_input_from_stream PARAMS((FILE *, const char *));
+extern void push_stream PARAMS((int));
+extern void pop_stream PARAMS((void));
+extern int stream_on_stack PARAMS((enum stream_type));
+extern char *read_secondary_line PARAMS((int));
+extern int find_reserved_word PARAMS((char *));
+extern void gather_here_documents PARAMS((void));
+extern void execute_variable_command PARAMS((char *, char *));
+
+extern int *save_token_state PARAMS((void));
+extern void restore_token_state PARAMS((int *));
+
+/* Functions from input.c */
+extern int getc_with_restart PARAMS((FILE *));
+extern int ungetc_with_restart PARAMS((int, FILE *));
+
+#if defined (BUFFERED_INPUT)
+/* Functions from input.c. */
+extern int fd_is_bash_input PARAMS((int));
+extern int set_bash_input_fd PARAMS((int));
+extern int save_bash_input PARAMS((int, int));
+extern int check_bash_input PARAMS((int));
+extern int duplicate_buffered_stream PARAMS((int, int));
+extern BUFFERED_STREAM *fd_to_buffered_stream PARAMS((int));
+extern BUFFERED_STREAM *set_buffered_stream PARAMS((int, BUFFERED_STREAM *));
+extern BUFFERED_STREAM *open_buffered_stream PARAMS((char *));
+extern void free_buffered_stream PARAMS((BUFFERED_STREAM *));
+extern int close_buffered_stream PARAMS((BUFFERED_STREAM *));
+extern int close_buffered_fd PARAMS((int));
+extern int sync_buffered_stream PARAMS((int));
+extern int buffered_getchar PARAMS((void));
+extern int buffered_ungetchar PARAMS((int));
+extern void with_input_from_buffered_stream PARAMS((int, char *));
+#endif /* BUFFERED_INPUT */
+
+#endif /* _INPUT_H_ */
diff --git a/jobs.c b/jobs.c
new file mode 100644
index 0000000..a581f30
--- /dev/null
+++ b/jobs.c
@@ -0,0 +1,5136 @@
+/* jobs.c - functions that make children, remember them, and handle their termination. */
+
+/* This file works with both POSIX and BSD systems.  It implements job
+   control. */
+
+/* Copyright (C) 1989-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include "bashtypes.h"
+#include "trap.h"
+#include <stdio.h>
+#include <signal.h>
+#include <errno.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "posixtime.h"
+
+#if defined (HAVE_SYS_RESOURCE_H) && defined (HAVE_WAIT3) && !defined (_POSIX_VERSION) && !defined (RLIMTYPE)
+#  include <sys/resource.h>
+#endif /* !_POSIX_VERSION && HAVE_SYS_RESOURCE_H && HAVE_WAIT3 && !RLIMTYPE */
+
+#if defined (HAVE_SYS_FILE_H)
+#  include <sys/file.h>
+#endif
+
+#include "filecntl.h"
+#include <sys/ioctl.h>
+#if defined (HAVE_SYS_PARAM_H)
+#include <sys/param.h>
+#endif
+
+#if defined (BUFFERED_INPUT)
+#  include "input.h"
+#endif
+
+/* Need to include this up here for *_TTY_DRIVER definitions. */
+#include "shtty.h"
+
+/* Define this if your output is getting swallowed.  It's a no-op on
+   machines with the termio or termios tty drivers. */
+/* #define DRAIN_OUTPUT */
+
+/* For the TIOCGPGRP and TIOCSPGRP ioctl parameters on HP-UX */
+#if defined (hpux) && !defined (TERMIOS_TTY_DRIVER)
+#  include <bsdtty.h>
+#endif /* hpux && !TERMIOS_TTY_DRIVER */
+
+#include "bashansi.h"
+#include "bashintl.h"
+#include "shell.h"
+#include "parser.h"
+#include "jobs.h"
+#include "execute_cmd.h"
+#include "flags.h"
+
+#include "typemax.h"
+
+#include "builtins/builtext.h"
+#include "builtins/common.h"
+
+#if defined (READLINE)
+# include <readline/readline.h>
+#endif
+
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+#if !defined (HAVE_KILLPG)
+extern int killpg PARAMS((pid_t, int));
+#endif
+
+#if !DEFAULT_CHILD_MAX
+#  define DEFAULT_CHILD_MAX 4096
+#endif
+
+#if !MAX_CHILD_MAX
+#  define MAX_CHILD_MAX 32768
+#endif
+
+#if !defined (DEBUG)
+#define MAX_JOBS_IN_ARRAY 4096		/* production */
+#else
+#define MAX_JOBS_IN_ARRAY 128		/* testing */
+#endif
+
+/* XXX for now */
+#define PIDSTAT_TABLE_SZ 4096
+#define BGPIDS_TABLE_SZ 512
+
+/* Flag values for second argument to delete_job */
+#define DEL_WARNSTOPPED		1	/* warn about deleting stopped jobs */
+#define DEL_NOBGPID		2	/* don't add pgrp leader to bgpids */
+
+/* Take care of system dependencies that must be handled when waiting for
+   children.  The arguments to the WAITPID macro match those to the Posix.1
+   waitpid() function. */
+
+#if defined (ultrix) && defined (mips) && defined (_POSIX_VERSION)
+#  define WAITPID(pid, statusp, options) \
+	wait3 ((union wait *)statusp, options, (struct rusage *)0)
+#else
+#  if defined (_POSIX_VERSION) || defined (HAVE_WAITPID)
+#    define WAITPID(pid, statusp, options) \
+	waitpid ((pid_t)pid, statusp, options)
+#  else
+#    if defined (HAVE_WAIT3)
+#      define WAITPID(pid, statusp, options) \
+	wait3 (statusp, options, (struct rusage *)0)
+#    else
+#      define WAITPID(pid, statusp, options) \
+	wait3 (statusp, options, (int *)0)
+#    endif /* HAVE_WAIT3 */
+#  endif /* !_POSIX_VERSION && !HAVE_WAITPID*/
+#endif /* !(Ultrix && mips && _POSIX_VERSION) */
+
+/* getpgrp () varies between systems.  Even systems that claim to be
+   Posix.1 compatible lie sometimes (Ultrix, SunOS4, apollo). */
+#if defined (GETPGRP_VOID)
+#  define getpgid(p) getpgrp ()
+#else
+#  define getpgid(p) getpgrp (p)
+#endif /* !GETPGRP_VOID */
+
+/* If the system needs it, REINSTALL_SIGCHLD_HANDLER will reinstall the
+   handler for SIGCHLD. */
+#if defined (MUST_REINSTALL_SIGHANDLERS)
+#  define REINSTALL_SIGCHLD_HANDLER signal (SIGCHLD, sigchld_handler)
+#else
+#  define REINSTALL_SIGCHLD_HANDLER
+#endif /* !MUST_REINSTALL_SIGHANDLERS */
+
+/* Some systems let waitpid(2) tell callers about stopped children. */
+#if !defined (WCONTINUED) || defined (WCONTINUED_BROKEN)
+#  undef WCONTINUED
+#  define WCONTINUED 0
+#endif
+#if !defined (WIFCONTINUED)
+#  define WIFCONTINUED(s)	(0)
+#endif
+
+/* The number of additional slots to allocate when we run out. */
+#define JOB_SLOTS 8
+
+typedef int sh_job_map_func_t PARAMS((JOB *, int, int, int));
+
+/* Variables used here but defined in other files. */
+extern WORD_LIST *subst_assign_varlist;
+
+extern SigHandler **original_signals;
+
+extern void set_original_signal PARAMS((int, SigHandler *));
+
+static struct jobstats zerojs = { -1L, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, NO_JOB, NO_JOB, 0, 0 };
+struct jobstats js = { -1L, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, NO_JOB, NO_JOB, 0, 0 };
+
+ps_index_t pidstat_table[PIDSTAT_TABLE_SZ];
+struct bgpids bgpids = { 0, 0, 0, 0 };
+
+struct procchain procsubs = { 0, 0, 0 };
+
+/* The array of known jobs. */
+JOB **jobs = (JOB **)NULL;
+
+#if 0
+/* The number of slots currently allocated to JOBS. */
+int job_slots = 0;
+#endif
+
+/* The controlling tty for this shell. */
+int shell_tty = -1;
+
+/* The shell's process group. */
+pid_t shell_pgrp = NO_PID;
+
+/* The terminal's process group. */
+pid_t terminal_pgrp = NO_PID;
+
+/* The process group of the shell's parent. */
+pid_t original_pgrp = NO_PID;
+
+/* The process group of the pipeline currently being made. */
+pid_t pipeline_pgrp = (pid_t)0;
+
+#if defined (PGRP_PIPE)
+/* Pipes which each shell uses to communicate with the process group leader
+   until all of the processes in a pipeline have been started.  Then the
+   process leader is allowed to continue. */
+int pgrp_pipe[2] = { -1, -1 };
+#endif
+
+/* Last child made by the shell.  */
+volatile pid_t last_made_pid = NO_PID;
+
+/* Pid of the last asynchronous child. */
+volatile pid_t last_asynchronous_pid = NO_PID;
+
+/* The pipeline currently being built. */
+PROCESS *the_pipeline = (PROCESS *)NULL;
+
+/* If this is non-zero, do job control. */
+int job_control = 1;
+
+/* Are we running in background? (terminal_pgrp != shell_pgrp) */
+int running_in_background = 0;
+
+/* Call this when you start making children. */
+int already_making_children = 0;
+
+/* If this is non-zero, $LINES and $COLUMNS are reset after every process
+   exits from get_tty_state(). */
+int check_window_size = CHECKWINSIZE_DEFAULT;
+
+PROCESS *last_procsub_child = (PROCESS *)NULL;
+
+/* Functions local to this file. */
+
+void debug_print_pgrps (void);
+
+static sighandler wait_sigint_handler PARAMS((int));
+static sighandler sigchld_handler PARAMS((int));
+static sighandler sigcont_sighandler PARAMS((int));
+static sighandler sigstop_sighandler PARAMS((int));
+
+static int waitchld PARAMS((pid_t, int));
+
+static PROCESS *find_pid_in_pipeline PARAMS((pid_t, PROCESS *, int));
+static PROCESS *find_pipeline PARAMS((pid_t, int, int *));
+static PROCESS *find_process PARAMS((pid_t, int, int *));
+
+static char *current_working_directory PARAMS((void));
+static char *job_working_directory PARAMS((void));
+static char *j_strsignal PARAMS((int));
+static char *printable_job_status PARAMS((int, PROCESS *, int));
+
+static PROCESS *find_last_proc PARAMS((int, int));
+static pid_t find_last_pid PARAMS((int, int));
+
+static int set_new_line_discipline PARAMS((int));
+static int map_over_jobs PARAMS((sh_job_map_func_t *, int, int));
+static int job_last_stopped PARAMS((int));
+static int job_last_running PARAMS((int));
+static int most_recent_job_in_state PARAMS((int, JOB_STATE));
+static int find_job PARAMS((pid_t, int, PROCESS **));
+static int print_job PARAMS((JOB *, int, int, int));
+static int process_exit_status PARAMS((WAIT));
+static int process_exit_signal PARAMS((WAIT));
+static int set_job_status_and_cleanup PARAMS((int));
+
+static WAIT job_signal_status PARAMS((int));
+static WAIT raw_job_exit_status PARAMS((int));
+
+static void notify_of_job_status PARAMS((void));
+static void reset_job_indices PARAMS((void));
+static void cleanup_dead_jobs PARAMS((void));
+static int processes_in_job PARAMS((int));
+static void realloc_jobs_list PARAMS((void));
+static int compact_jobs_list PARAMS((int));
+static void add_process PARAMS((char *, pid_t));
+static void print_pipeline PARAMS((PROCESS *, int, int, FILE *));
+static void pretty_print_job PARAMS((int, int, FILE *));
+static void set_current_job PARAMS((int));
+static void reset_current PARAMS((void));
+static void set_job_running PARAMS((int));
+static void setjstatus PARAMS((int));
+static int maybe_give_terminal_to PARAMS((pid_t, pid_t, int));
+static void mark_all_jobs_as_dead PARAMS((void));
+static void mark_dead_jobs_as_notified PARAMS((int));
+static void restore_sigint_handler PARAMS((void));
+#if defined (PGRP_PIPE)
+static void pipe_read PARAMS((int *));
+#endif
+
+/* Hash table manipulation */
+
+static ps_index_t *pshash_getbucket PARAMS((pid_t));
+static void pshash_delindex PARAMS((ps_index_t));
+
+/* Saved background process status management */
+static struct pidstat *bgp_add PARAMS((pid_t, int));
+static int bgp_delete PARAMS((pid_t));
+static void bgp_clear PARAMS((void));
+static int bgp_search PARAMS((pid_t));
+
+static struct pipeline_saver *alloc_pipeline_saver PARAMS((void));
+
+static ps_index_t bgp_getindex PARAMS((void));
+static void bgp_resize PARAMS((void));	/* XXX */
+
+#if defined (ARRAY_VARS)
+static int *pstatuses;		/* list of pipeline statuses */
+static int statsize;
+#endif
+
+/* Used to synchronize between wait_for and other functions and the SIGCHLD
+   signal handler. */
+static int sigchld;
+static int queue_sigchld;
+
+#define QUEUE_SIGCHLD(os)	(os) = sigchld, queue_sigchld++
+
+/* We set queue_sigchld around the call to waitchld to protect data structures
+   from a SIGCHLD arriving while waitchld is executing. */
+#define UNQUEUE_SIGCHLD(os) \
+	do { \
+	  queue_sigchld--; \
+	  if (queue_sigchld == 0 && os != sigchld) \
+	    { \
+	      queue_sigchld = 1; \
+	      waitchld (-1, 0); \
+	      queue_sigchld = 0; \
+	    } \
+	} while (0)
+
+static SigHandler *old_tstp, *old_ttou, *old_ttin;
+static SigHandler *old_cont = (SigHandler *)SIG_DFL;
+
+/* A place to temporarily save the current pipeline. */
+static struct pipeline_saver *saved_pipeline;
+static int saved_already_making_children;
+
+/* Set this to non-zero whenever you don't want the jobs list to change at
+   all: no jobs deleted and no status change notifications.  This is used,
+   for example, when executing SIGCHLD traps, which may run arbitrary
+   commands. */
+static int jobs_list_frozen;
+
+static char retcode_name_buffer[64];
+
+#if !defined (_POSIX_VERSION)
+
+/* These are definitions to map POSIX 1003.1 functions onto existing BSD
+   library functions and system calls. */
+#define setpgid(pid, pgrp)	setpgrp (pid, pgrp)
+#define tcsetpgrp(fd, pgrp)	ioctl ((fd), TIOCSPGRP, &(pgrp))
+
+pid_t
+tcgetpgrp (fd)
+     int fd;
+{
+  pid_t pgrp;
+
+  /* ioctl will handle setting errno correctly. */
+  if (ioctl (fd, TIOCGPGRP, &pgrp) < 0)
+    return (-1);
+  return (pgrp);
+}
+
+#endif /* !_POSIX_VERSION */
+
+/* Initialize the global job stats structure and other bookkeeping variables */
+void
+init_job_stats ()
+{
+  js = zerojs;
+}
+
+/* Return the working directory for the current process.  Unlike
+   job_working_directory, this does not call malloc (), nor do any
+   of the functions it calls.  This is so that it can safely be called
+   from a signal handler. */
+static char *
+current_working_directory ()
+{
+  char *dir;
+  static char d[PATH_MAX];
+
+  dir = get_string_value ("PWD");
+
+  if (dir == 0 && the_current_working_directory && no_symbolic_links)
+    dir = the_current_working_directory;
+
+  if (dir == 0)
+    {
+      dir = getcwd (d, sizeof(d));
+      if (dir)
+	dir = d;
+    }
+
+  return (dir == 0) ? "<unknown>" : dir;
+}
+
+/* Return the working directory for the current process. */
+static char *
+job_working_directory ()
+{
+  char *dir;
+
+  dir = get_string_value ("PWD");
+  if (dir)
+    return (savestring (dir));
+
+  dir = get_working_directory ("job-working-directory");
+  if (dir)
+    return (dir);
+
+  return (savestring ("<unknown>"));
+}
+
+void
+making_children ()
+{
+  if (already_making_children)
+    return;
+
+  already_making_children = 1;
+  start_pipeline ();
+}
+
+void
+stop_making_children ()
+{
+  already_making_children = 0;
+}
+
+void
+cleanup_the_pipeline ()
+{
+  PROCESS *disposer;
+  sigset_t set, oset;
+
+  BLOCK_CHILD (set, oset);
+  disposer = the_pipeline;
+  the_pipeline = (PROCESS *)NULL;
+  UNBLOCK_CHILD (oset);
+
+  if (disposer)
+    discard_pipeline (disposer);
+}
+
+/* Not used right now */
+void
+discard_last_procsub_child ()
+{
+  PROCESS *disposer;
+  sigset_t set, oset;
+
+  BLOCK_CHILD (set, oset);
+  disposer = last_procsub_child;
+  last_procsub_child = (PROCESS *)NULL;
+  UNBLOCK_CHILD (oset);
+
+  if (disposer)
+    discard_pipeline (disposer);
+}
+
+static struct pipeline_saver *
+alloc_pipeline_saver ()
+{
+  struct pipeline_saver *ret;
+
+  ret = (struct pipeline_saver *)xmalloc (sizeof (struct pipeline_saver));
+  ret->pipeline = 0;
+  ret->next = 0;
+  return ret;
+}
+
+void
+save_pipeline (clear)
+     int clear;
+{
+  sigset_t set, oset;
+  struct pipeline_saver *saver;
+
+  BLOCK_CHILD (set, oset);
+  saver = alloc_pipeline_saver ();
+  saver->pipeline = the_pipeline;
+  saver->next = saved_pipeline;
+  saved_pipeline = saver;
+  if (clear)
+    the_pipeline = (PROCESS *)NULL;
+  saved_already_making_children = already_making_children;
+  UNBLOCK_CHILD (oset);
+}
+
+PROCESS *
+restore_pipeline (discard)
+     int discard;
+{
+  PROCESS *old_pipeline;
+  sigset_t set, oset;
+  struct pipeline_saver *saver;
+
+  BLOCK_CHILD (set, oset);
+  old_pipeline = the_pipeline;
+  the_pipeline = saved_pipeline->pipeline;
+  saver = saved_pipeline;
+  saved_pipeline = saved_pipeline->next;
+  free (saver);
+  already_making_children = saved_already_making_children;
+  UNBLOCK_CHILD (oset);
+
+  if (discard && old_pipeline)
+    {
+      discard_pipeline (old_pipeline);
+      return ((PROCESS *)NULL);
+    }
+  return old_pipeline;
+}
+
+/* Start building a pipeline.  */
+void
+start_pipeline ()
+{
+  if (the_pipeline)
+    {
+      cleanup_the_pipeline ();
+      /* If job_control == 0, pipeline_pgrp will always be equal to shell_pgrp;
+	 if job_control != 0, pipeline_pgrp == shell_pgrp for command and
+	 process substitution, in which case we want it to be the same as
+	 shell_pgrp for the lifetime of this shell instance. */
+      if (pipeline_pgrp != shell_pgrp)
+	pipeline_pgrp = 0;
+#if defined (PGRP_PIPE)
+      sh_closepipe (pgrp_pipe);
+#endif
+    }
+
+#if defined (PGRP_PIPE)
+  if (job_control)
+    {
+      if (pipe (pgrp_pipe) == -1)
+	sys_error (_("start_pipeline: pgrp pipe"));
+    }
+#endif
+}
+
+/* Stop building a pipeline.  Install the process list in the job array.
+   This returns the index of the newly installed job.
+   DEFERRED is a command structure to be executed upon satisfactory
+   execution exit of this pipeline. */
+int
+stop_pipeline (async, deferred)
+     int async;
+     COMMAND *deferred;
+{
+  register int i, j;
+  JOB *newjob;
+  sigset_t set, oset;
+
+  BLOCK_CHILD (set, oset);
+
+#if defined (PGRP_PIPE)
+  /* The parent closes the process group synchronization pipe. */
+  sh_closepipe (pgrp_pipe);
+#endif
+
+  cleanup_dead_jobs ();
+
+  if (js.j_jobslots == 0)
+    {
+      js.j_jobslots = JOB_SLOTS;
+      jobs = (JOB **)xmalloc (js.j_jobslots * sizeof (JOB *));
+
+      /* Now blank out these new entries. */
+      for (i = 0; i < js.j_jobslots; i++)
+	jobs[i] = (JOB *)NULL;
+
+      js.j_firstj = js.j_lastj = js.j_njobs = 0;
+    }
+
+  /* Scan from the last slot backward, looking for the next free one. */
+  /* XXX - revisit this interactive assumption */
+  /* XXX - this way for now */
+  if (interactive)
+    {
+      for (i = js.j_jobslots; i; i--)
+	if (jobs[i - 1])
+	  break;
+    }
+  else
+    {
+#if 0
+      /* This wraps around, but makes it inconvenient to extend the array */
+      for (i = js.j_lastj+1; i != js.j_lastj; i++)
+	{
+	  if (i >= js.j_jobslots)
+	    i = 0;
+	  if (jobs[i] == 0)
+	    break;
+	}	
+      if (i == js.j_lastj)
+        i = js.j_jobslots;
+#else
+      /* This doesn't wrap around yet. */
+      for (i = js.j_lastj ? js.j_lastj + 1 : js.j_lastj; i < js.j_jobslots; i++)
+	if (jobs[i] == 0)
+	  break;
+#endif
+    }
+
+  /* Do we need more room? */
+
+  /* First try compaction */
+  if ((interactive_shell == 0 || subshell_environment) && i == js.j_jobslots && js.j_jobslots >= MAX_JOBS_IN_ARRAY)
+    i = compact_jobs_list (0);
+
+  /* If we can't compact, reallocate */
+  if (i == js.j_jobslots)
+    {
+      js.j_jobslots += JOB_SLOTS;
+      jobs = (JOB **)xrealloc (jobs, (js.j_jobslots * sizeof (JOB *)));
+
+      for (j = i; j < js.j_jobslots; j++)
+	jobs[j] = (JOB *)NULL;
+    }
+
+  /* Add the current pipeline to the job list. */
+  if (the_pipeline)
+    {
+      register PROCESS *p;
+      int any_running, any_stopped, n;
+
+      newjob = (JOB *)xmalloc (sizeof (JOB));
+
+      for (n = 1, p = the_pipeline; p->next != the_pipeline; n++, p = p->next)
+	;
+      p->next = (PROCESS *)NULL;
+      newjob->pipe = REVERSE_LIST (the_pipeline, PROCESS *);
+      for (p = newjob->pipe; p->next; p = p->next)
+	;
+      p->next = newjob->pipe;
+
+      the_pipeline = (PROCESS *)NULL;
+      newjob->pgrp = pipeline_pgrp;
+      if (pipeline_pgrp != shell_pgrp)
+	pipeline_pgrp = 0;
+
+      newjob->flags = 0;
+      if (pipefail_opt)
+	newjob->flags |= J_PIPEFAIL;
+
+      /* Flag to see if in another pgrp. */
+      if (job_control)
+	newjob->flags |= J_JOBCONTROL;
+
+      /* Set the state of this pipeline. */
+      p = newjob->pipe;
+      any_running = any_stopped = 0;
+      do
+	{
+	  any_running |= PRUNNING (p);
+	  any_stopped |= PSTOPPED (p);
+	  p = p->next;
+	}
+      while (p != newjob->pipe);
+
+      newjob->state = any_running ? JRUNNING : (any_stopped ? JSTOPPED : JDEAD);
+      newjob->wd = job_working_directory ();
+      newjob->deferred = deferred;
+
+      newjob->j_cleanup = (sh_vptrfunc_t *)NULL;
+      newjob->cleanarg = (PTR_T) NULL;
+
+      jobs[i] = newjob;
+      if (newjob->state == JDEAD && (newjob->flags & J_FOREGROUND))
+	setjstatus (i);
+      if (newjob->state == JDEAD)
+	{
+	  js.c_reaped += n;	/* wouldn't have been done since this was not part of a job */
+	  js.j_ndead++;
+	}
+      js.c_injobs += n;
+
+      js.j_lastj = i;
+      js.j_njobs++;
+    }
+  else
+    newjob = (JOB *)NULL;
+
+  if (newjob)
+    js.j_lastmade = newjob;
+
+  if (async)
+    {
+      if (newjob)
+	{
+	  newjob->flags &= ~J_FOREGROUND;
+	  newjob->flags |= J_ASYNC;
+	  js.j_lastasync = newjob;
+	}
+      reset_current ();
+    }
+  else
+    {
+      if (newjob)
+	{
+	  newjob->flags |= J_FOREGROUND;
+	  /*
+	   *		!!!!! NOTE !!!!!  (chet@po.cwru.edu)
+	   *
+	   * The currently-accepted job control wisdom says to set the
+	   * terminal's process group n+1 times in an n-step pipeline:
+	   * once in the parent and once in each child.  This is where
+	   * the parent gives it away.
+	   *
+	   * Don't give the terminal away if this shell is an asynchronous
+	   * subshell or if we're a (presumably non-interactive) shell running
+	   * in the background.
+	   *
+	   */
+	  if (job_control && newjob->pgrp && (subshell_environment&SUBSHELL_ASYNC) == 0 && running_in_background == 0)
+	    maybe_give_terminal_to (shell_pgrp, newjob->pgrp, 0);
+	}
+    }
+
+  stop_making_children ();
+  UNBLOCK_CHILD (oset);
+  return (newjob ? i : js.j_current);
+}
+
+/* Functions to manage the list of exited background pids whose status has
+   been saved.
+
+   pidstat_table:
+
+   The current implementation is a hash table using a single (separate) arena
+   for storage that can be allocated and freed as a unit.  The size of the hash
+   table is a multiple of PIDSTAT_TABLE_SZ (4096) and multiple PIDs that hash
+   to the same value are chained through the bucket_next and bucket_prev
+   pointers (basically coalesced hashing for collision resolution).
+
+   bgpids.storage:
+
+   All pid/status storage is done using the circular buffer bgpids.storage.
+   This must contain at least js.c_childmax entries.  The circular buffer is
+   used to supply the ordered list Posix requires ("the last CHILD_MAX
+   processes").  To avoid searching the entire storage table for a given PID,
+   the hash table (pidstat_table) holds pointers into the storage arena and
+   uses a doubly-linked list of cells (bucket_next/bucket_prev, also pointers
+   into the arena) to implement collision resolution. */
+
+/* The number of elements in bgpids.storage always has to be > js.c_childmax for
+   the circular buffer to work right. */
+static void
+bgp_resize ()
+{
+  ps_index_t nsize, nsize_cur, nsize_max;
+  ps_index_t psi;
+
+  if (bgpids.nalloc == 0)
+    {
+      /* invalidate hash table when bgpids table is reallocated */
+      for (psi = 0; psi < PIDSTAT_TABLE_SZ; psi++)
+        pidstat_table[psi] = NO_PIDSTAT;
+      nsize = BGPIDS_TABLE_SZ;	/* should be power of 2 */
+      bgpids.head = 0;
+    }
+  else
+    nsize = bgpids.nalloc;
+
+  nsize_max = TYPE_MAXIMUM (ps_index_t);
+  nsize_cur = (ps_index_t)js.c_childmax;
+  if (nsize_cur < 0)				/* overflow */
+    nsize_cur = MAX_CHILD_MAX;
+
+  while (nsize > 0 && nsize < nsize_cur)	/* > 0 should catch overflow */
+    nsize <<= 1;
+  if (nsize > nsize_max || nsize <= 0)		/* overflow? */
+    nsize = nsize_max;
+  if (nsize > MAX_CHILD_MAX)
+    nsize = nsize_max = MAX_CHILD_MAX;		/* hard cap */
+
+  if (bgpids.nalloc < nsize_cur && bgpids.nalloc < nsize_max)
+    {
+      bgpids.storage = (struct pidstat *)xrealloc (bgpids.storage, nsize * sizeof (struct pidstat));
+
+      for (psi = bgpids.nalloc; psi < nsize; psi++)
+	bgpids.storage[psi].pid = NO_PID;
+
+      bgpids.nalloc = nsize;
+
+    }
+  else if (bgpids.head >= bgpids.nalloc)	/* wrap around */
+    bgpids.head = 0;
+}
+
+static ps_index_t
+bgp_getindex ()
+{
+  if (bgpids.nalloc < (ps_index_t)js.c_childmax || bgpids.head >= bgpids.nalloc)
+    bgp_resize ();
+
+  pshash_delindex (bgpids.head);		/* XXX - clear before reusing */
+  return bgpids.head++;
+}
+
+static ps_index_t *
+pshash_getbucket (pid)
+     pid_t pid;
+{
+  unsigned long hash;		/* XXX - u_bits32_t */
+
+  hash = pid * 0x9e370001UL;
+  return (&pidstat_table[hash % PIDSTAT_TABLE_SZ]);
+}
+
+static struct pidstat *
+bgp_add (pid, status)
+     pid_t pid;
+     int status;
+{
+  ps_index_t *bucket, psi;
+  struct pidstat *ps;
+
+  /* bucket == existing chain of pids hashing to same value
+     psi = where were going to put this pid/status */
+
+  bucket = pshash_getbucket (pid);	/* index into pidstat_table */
+  psi = bgp_getindex ();		/* bgpids.head, index into storage */
+
+  /* XXX - what if psi == *bucket? */
+  if (psi == *bucket)
+    {
+#ifdef DEBUG
+      internal_warning ("hashed pid %d (pid %d) collides with bgpids.head, skipping", psi, pid);
+#endif
+      bgpids.storage[psi].pid = NO_PID;		/* make sure */
+      psi = bgp_getindex ();			/* skip to next one */
+    }
+
+  ps = &bgpids.storage[psi];
+
+  ps->pid = pid;
+  ps->status = status;
+  ps->bucket_next = *bucket;
+  ps->bucket_prev = NO_PIDSTAT;
+
+  bgpids.npid++;
+
+#if 0
+  if (bgpids.npid > js.c_childmax)
+    bgp_prune ();
+#endif
+
+  if (ps->bucket_next != NO_PIDSTAT)
+    bgpids.storage[ps->bucket_next].bucket_prev = psi;
+
+  *bucket = psi;		/* set chain head in hash table */
+
+  return ps;
+}
+
+static void
+pshash_delindex (psi)
+     ps_index_t psi;
+{
+  struct pidstat *ps;
+  ps_index_t *bucket;
+
+  ps = &bgpids.storage[psi];
+  if (ps->pid == NO_PID)
+    return;
+
+  if (ps->bucket_next != NO_PIDSTAT)
+    bgpids.storage[ps->bucket_next].bucket_prev = ps->bucket_prev;
+  if (ps->bucket_prev != NO_PIDSTAT)
+    bgpids.storage[ps->bucket_prev].bucket_next = ps->bucket_next;
+  else
+    {
+      bucket = pshash_getbucket (ps->pid);
+      *bucket = ps->bucket_next;	/* deleting chain head in hash table */
+    }
+
+  /* clear out this cell, in case it gets reused. */
+  ps->pid = NO_PID;
+  ps->bucket_next = ps->bucket_prev = NO_PIDSTAT;
+}
+
+static int
+bgp_delete (pid)
+     pid_t pid;
+{
+  ps_index_t psi, orig_psi;
+
+  if (bgpids.storage == 0 || bgpids.nalloc == 0 || bgpids.npid == 0)
+    return 0;
+
+  /* Search chain using hash to find bucket in pidstat_table */
+  for (orig_psi = psi = *(pshash_getbucket (pid)); psi != NO_PIDSTAT; psi = bgpids.storage[psi].bucket_next)
+    {
+      if (bgpids.storage[psi].pid == pid)
+	break;
+      if (orig_psi == bgpids.storage[psi].bucket_next)	/* catch reported bug */
+	{
+	  internal_warning (_("bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"), psi);
+	  return 0;
+	}
+    }
+
+  if (psi == NO_PIDSTAT)
+    return 0;		/* not found */
+
+#if defined (DEBUG)
+  itrace("bgp_delete: deleting %d", pid);
+#endif
+
+  pshash_delindex (psi);	/* hash table management */
+
+  bgpids.npid--;
+  return 1;
+}
+
+/* Clear out the list of saved statuses */
+static void
+bgp_clear ()
+{
+  if (bgpids.storage == 0 || bgpids.nalloc == 0)
+    return;
+
+  free (bgpids.storage);
+
+  bgpids.storage = 0;
+  bgpids.nalloc = 0;
+  bgpids.head = 0;
+
+  bgpids.npid = 0;
+}
+
+/* Search for PID in the list of saved background pids; return its status if
+   found.  If not found, return -1.  We hash to the right spot in pidstat_table
+   and follow the bucket chain to the end. */
+static int
+bgp_search (pid)
+     pid_t pid;
+{
+  ps_index_t psi, orig_psi;
+
+  if (bgpids.storage == 0 || bgpids.nalloc == 0 || bgpids.npid == 0)
+    return -1;
+
+  /* Search chain using hash to find bucket in pidstat_table */
+  for (orig_psi = psi = *(pshash_getbucket (pid)); psi != NO_PIDSTAT; psi = bgpids.storage[psi].bucket_next)
+    {
+      if (bgpids.storage[psi].pid == pid)
+	return (bgpids.storage[psi].status);
+      if (orig_psi == bgpids.storage[psi].bucket_next)	/* catch reported bug */
+	{
+	  internal_warning (_("bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"), psi);
+	  return -1;
+	}
+    }
+
+  return -1;
+}
+
+#if 0
+static void
+bgp_prune ()
+{
+  return;
+}
+#endif
+
+/* External interface to bgp_add; takes care of blocking and unblocking
+   SIGCHLD. Not really used. */
+void
+save_proc_status (pid, status)
+     pid_t pid;
+     int status;
+{
+  sigset_t set, oset;
+
+  BLOCK_CHILD (set, oset);
+  bgp_add (pid, status);
+  UNBLOCK_CHILD (oset);  
+}
+
+#if defined (PROCESS_SUBSTITUTION)
+/* Functions to add and remove PROCESS * children from the list of running
+   asynchronous process substitutions. The list is currently a simple singly
+   linked list of PROCESS *, so it works with the set of callers that want
+   a child. subst.c:process_substitute adds to the list, the various wait*
+   functions manipulate child->running and child->status, and processes are
+   eventually removed from the list and added to the bgpids table. */
+
+static void
+procsub_free (p)
+     PROCESS *p;
+{
+  FREE (p->command);
+  free (p);
+}
+    
+PROCESS *
+procsub_add (p)
+     PROCESS *p;
+{
+  sigset_t set, oset;
+
+  BLOCK_CHILD (set, oset);
+  if (procsubs.head == 0)
+    {
+      procsubs.head = procsubs.end = p;
+      procsubs.nproc = 0;
+    }
+  else
+    {
+      procsubs.end->next = p;
+      procsubs.end = p;
+    }
+  procsubs.nproc++;
+  UNBLOCK_CHILD (oset);
+
+  return p;
+}
+
+PROCESS *
+procsub_search (pid)
+     pid_t pid;
+{
+  PROCESS *p;
+  sigset_t set, oset;
+
+  BLOCK_CHILD (set, oset);
+  for (p = procsubs.head; p; p = p->next)
+    if (p->pid == pid)
+      break;
+  UNBLOCK_CHILD (oset);
+
+  return p;
+}
+
+PROCESS *
+procsub_delete (pid)
+     pid_t pid;
+{
+  PROCESS *p, *prev;
+  sigset_t set, oset;
+
+  BLOCK_CHILD (set, oset);
+  for (p = prev = procsubs.head; p; prev = p, p = p->next)
+    if (p->pid == pid)
+      {
+	prev->next = p->next;
+	break;
+      }
+
+  if (p == 0)
+    {
+      UNBLOCK_CHILD (oset);
+      return p;
+    }
+
+  if (p == procsubs.head)
+    procsubs.head = procsubs.head->next;
+  else if (p == procsubs.end)
+    procsubs.end = prev;
+
+  procsubs.nproc--;
+  if (procsubs.nproc == 0)
+    procsubs.head = procsubs.end = 0;
+  else if (procsubs.nproc == 1)		/* XXX */
+    procsubs.end = procsubs.head;
+
+  /* this can't be called anywhere in a signal handling path */
+  bgp_add (p->pid, process_exit_status (p->status));
+  UNBLOCK_CHILD (oset);
+  return (p);  
+}
+
+int
+procsub_waitpid (pid)
+     pid_t pid;
+{
+  PROCESS *p;
+  int r;
+
+  p = procsub_search (pid);
+  if (p == 0)
+    return -1;
+  if (p->running == PS_DONE)
+    return (p->status);
+  r = wait_for (p->pid, 0);
+  return (r);			/* defer removing until later */
+}
+
+void
+procsub_waitall ()
+{
+  PROCESS *p;
+  int r;
+
+  for (p = procsubs.head; p; p = p->next)
+    {
+      if (p->running == PS_DONE)
+	continue;
+      r = wait_for (p->pid, 0);
+    }
+}
+
+void
+procsub_clear ()
+{
+  PROCESS *p, *ps;
+  sigset_t set, oset;
+
+  BLOCK_CHILD (set, oset);
+  
+  for (ps = procsubs.head; ps; )
+    {
+      p = ps;
+      ps = ps->next;
+      procsub_free (p);
+    }
+  procsubs.head = procsubs.end = 0;
+  procsubs.nproc = 0;        
+  UNBLOCK_CHILD (oset);
+}
+
+/* Must be called with SIGCHLD blocked. */
+void
+procsub_prune ()
+{
+  PROCESS *ohead, *oend, *ps, *p;
+  int onproc;
+
+  if (procsubs.nproc == 0)
+    return;
+
+  ohead = procsubs.head;
+  oend = procsubs.end;
+  onproc = procsubs.nproc;
+
+  procsubs.head = procsubs.end = 0;
+  procsubs.nproc = 0;
+
+  for (p = ohead; p; )
+    {
+      ps = p->next;
+      p->next = 0;
+      if (p->running == PS_DONE)
+	{
+	  bgp_add (p->pid, process_exit_status (p->status));
+	  procsub_free (p);
+	}
+      else
+	procsub_add (p);
+      p = ps;
+    }
+}
+#endif
+
+/* Reset the values of js.j_lastj and js.j_firstj after one or both have
+   been deleted.  The caller should check whether js.j_njobs is 0 before
+   calling this.  This wraps around, but the rest of the code does not.  At
+   this point, it should not matter. */
+static void
+reset_job_indices ()
+{
+  int old;
+
+  if (jobs[js.j_firstj] == 0)
+    {
+      old = js.j_firstj++;
+      if (old >= js.j_jobslots)
+	old = js.j_jobslots - 1;
+      while (js.j_firstj != old)
+	{
+	  if (js.j_firstj >= js.j_jobslots)
+	    js.j_firstj = 0;
+	  if (jobs[js.j_firstj] || js.j_firstj == old)	/* needed if old == 0 */
+	    break;
+	  js.j_firstj++;
+	}
+      if (js.j_firstj == old)
+	js.j_firstj = js.j_lastj = js.j_njobs = 0;
+    }
+  if (jobs[js.j_lastj] == 0)
+    {
+      old = js.j_lastj--;
+      if (old < 0)
+	old = 0;
+      while (js.j_lastj != old)
+	{
+	  if (js.j_lastj < 0)
+	    js.j_lastj = js.j_jobslots - 1;
+	  if (jobs[js.j_lastj] || js.j_lastj == old)	/* needed if old == js.j_jobslots */
+	    break;
+	  js.j_lastj--;
+	}
+      if (js.j_lastj == old)
+	js.j_firstj = js.j_lastj = js.j_njobs = 0;
+    }
+}
+      
+/* Delete all DEAD jobs that the user had received notification about. */
+static void
+cleanup_dead_jobs ()
+{
+  register int i;
+  int os;
+  PROCESS *discard;
+
+  if (js.j_jobslots == 0 || jobs_list_frozen)
+    return;
+
+  QUEUE_SIGCHLD(os);
+
+  /* XXX could use js.j_firstj and js.j_lastj here */
+  for (i = 0; i < js.j_jobslots; i++)
+    {
+#if defined (DEBUG)
+      if (i < js.j_firstj && jobs[i])
+	itrace("cleanup_dead_jobs: job %d non-null before js.j_firstj (%d)", i, js.j_firstj);
+      if (i > js.j_lastj && jobs[i])
+	itrace("cleanup_dead_jobs: job %d non-null after js.j_lastj (%d)", i, js.j_lastj);
+#endif
+
+      if (jobs[i] && DEADJOB (i) && IS_NOTIFIED (i))
+	delete_job (i, 0);
+    }
+
+#if defined (PROCESS_SUBSTITUTION)
+  procsub_prune ();
+  last_procsub_child = (PROCESS *)NULL;
+#endif
+
+#if defined (COPROCESS_SUPPORT)
+  coproc_reap ();
+#endif
+
+  UNQUEUE_SIGCHLD(os);
+}
+
+static int
+processes_in_job (job)
+     int job;
+{
+  int nproc;
+  register PROCESS *p;
+
+  nproc = 0;
+  p = jobs[job]->pipe;
+  do
+    {
+      p = p->next;
+      nproc++;
+    }
+  while (p != jobs[job]->pipe);
+
+  return nproc;
+}
+
+static void
+delete_old_job (pid)
+     pid_t pid;
+{
+  PROCESS *p;
+  int job;
+
+  job = find_job (pid, 0, &p);
+  if (job != NO_JOB)
+    {
+#ifdef DEBUG
+      itrace ("delete_old_job: found pid %d in job %d with state %d", pid, job, jobs[job]->state);
+#endif
+      if (JOBSTATE (job) == JDEAD)
+	delete_job (job, DEL_NOBGPID);
+      else
+	{
+#ifdef DEBUG
+	  internal_warning (_("forked pid %d appears in running job %d"), pid, job+1);
+#endif
+	  if (p)
+	    p->pid = 0;
+	}
+    }
+}
+
+/* Reallocate and compress the jobs list.  This returns with a jobs array
+   whose size is a multiple of JOB_SLOTS and can hold the current number of
+   jobs.  Heuristics are used to minimize the number of new reallocs. */
+static void
+realloc_jobs_list ()
+{
+  sigset_t set, oset;
+  int nsize, i, j, ncur, nprev;
+  JOB **nlist;
+
+  ncur = nprev = NO_JOB;
+  nsize = ((js.j_njobs + JOB_SLOTS - 1) / JOB_SLOTS);
+  nsize *= JOB_SLOTS;
+  i = js.j_njobs % JOB_SLOTS;
+  if (i == 0 || i > (JOB_SLOTS >> 1))
+    nsize += JOB_SLOTS;
+
+  BLOCK_CHILD (set, oset);
+  nlist = (js.j_jobslots == nsize) ? jobs : (JOB **) xmalloc (nsize * sizeof (JOB *));
+
+  js.c_reaped = js.j_ndead = 0;
+  for (i = j = 0; i < js.j_jobslots; i++)
+    if (jobs[i])
+      {
+	if (i == js.j_current)
+	  ncur = j;
+	if (i == js.j_previous)
+	  nprev = j;
+	nlist[j++] = jobs[i];
+	if (jobs[i]->state == JDEAD)
+	  {
+	    js.j_ndead++;
+	    js.c_reaped += processes_in_job (i);
+	  }
+      }
+
+#if 0
+  itrace ("realloc_jobs_list: resize jobs list from %d to %d", js.j_jobslots, nsize);
+  itrace ("realloc_jobs_list: j_lastj changed from %d to %d", js.j_lastj, (j > 0) ? j - 1 : 0);
+  itrace ("realloc_jobs_list: j_njobs changed from %d to %d", js.j_njobs, j);
+  itrace ("realloc_jobs_list: js.j_ndead %d js.c_reaped %d", js.j_ndead, js.c_reaped);
+#endif
+
+  js.j_firstj = 0;
+  js.j_lastj = (j > 0) ? j - 1 : 0;
+  js.j_njobs = j;
+  js.j_jobslots = nsize;
+
+  /* Zero out remaining slots in new jobs list */
+  for ( ; j < nsize; j++)
+    nlist[j] = (JOB *)NULL;
+
+  if (jobs != nlist)
+    {
+      free (jobs);
+      jobs = nlist;
+    }
+
+  if (ncur != NO_JOB)
+    js.j_current = ncur;
+  if (nprev != NO_JOB)
+    js.j_previous = nprev;
+
+  /* Need to reset these */
+  if (js.j_current == NO_JOB || js.j_previous == NO_JOB || js.j_current > js.j_lastj || js.j_previous > js.j_lastj)
+    reset_current ();
+
+#if 0
+  itrace ("realloc_jobs_list: reset js.j_current (%d) and js.j_previous (%d)", js.j_current, js.j_previous);
+#endif
+
+  UNBLOCK_CHILD (oset);
+}
+
+/* Compact the jobs list by removing dead jobs.  Assume that we have filled
+   the jobs array to some predefined maximum.  Called when the shell is not
+   the foreground process (subshell_environment != 0).  Returns the first
+   available slot in the compacted list.  If that value is js.j_jobslots, then
+   the list needs to be reallocated.  The jobs array may be in new memory if
+   this returns > 0 and < js.j_jobslots.  FLAGS is reserved for future use. */
+static int
+compact_jobs_list (flags)
+     int flags;
+{
+  if (js.j_jobslots == 0 || jobs_list_frozen)
+    return js.j_jobslots;
+
+  reap_dead_jobs ();
+  realloc_jobs_list ();
+
+#if 0
+  itrace("compact_jobs_list: returning %d", (js.j_lastj || jobs[js.j_lastj]) ? js.j_lastj + 1 : 0);
+#endif
+
+  return ((js.j_lastj || jobs[js.j_lastj]) ? js.j_lastj + 1 : 0);
+}
+
+/* Delete the job at INDEX from the job list.  Must be called
+   with SIGCHLD blocked. */
+void
+delete_job (job_index, dflags)
+     int job_index, dflags;
+{
+  register JOB *temp;
+  PROCESS *proc;
+  int ndel;
+
+  if (js.j_jobslots == 0 || jobs_list_frozen)
+    return;
+
+  if ((dflags & DEL_WARNSTOPPED) && subshell_environment == 0 && STOPPED (job_index))
+    internal_warning (_("deleting stopped job %d with process group %ld"), job_index+1, (long)jobs[job_index]->pgrp);
+  temp = jobs[job_index];
+  if (temp == 0)
+    return;
+
+  if ((dflags & DEL_NOBGPID) == 0 && (temp->flags & (J_ASYNC|J_FOREGROUND)) == J_ASYNC)
+    {
+      proc = find_last_proc (job_index, 0);
+      if (proc)
+	bgp_add (proc->pid, process_exit_status (proc->status));
+    }
+
+  jobs[job_index] = (JOB *)NULL;
+  if (temp == js.j_lastmade)
+    js.j_lastmade = 0;
+  else if (temp == js.j_lastasync)
+    js.j_lastasync = 0;
+
+  free (temp->wd);
+  ndel = discard_pipeline (temp->pipe);
+
+  js.c_injobs -= ndel;
+  if (temp->state == JDEAD)
+    {
+      /* XXX - save_pipeline and restore_pipeline (e.g., for DEBUG trap) can
+	 mess with this total. */
+      js.c_reaped -= ndel;	/* assumes proc hadn't been reaped earlier */
+      js.j_ndead--;
+      if (js.c_reaped < 0)
+	{
+#ifdef DEBUG
+	  itrace("delete_job (%d pgrp %d): js.c_reaped (%d) < 0 ndel = %d js.j_ndead = %d", job_index, temp->pgrp, js.c_reaped, ndel, js.j_ndead);
+#endif
+	  js.c_reaped = 0;
+	}
+    }
+
+  if (temp->deferred)
+    dispose_command (temp->deferred);
+
+  free (temp);
+
+  js.j_njobs--;
+  if (js.j_njobs == 0)
+    js.j_firstj = js.j_lastj = 0;
+  else if (jobs[js.j_firstj] == 0 || jobs[js.j_lastj] == 0)
+    reset_job_indices ();
+
+  if (job_index == js.j_current || job_index == js.j_previous)
+    reset_current ();
+}
+
+/* Must be called with SIGCHLD blocked. */
+void
+nohup_job (job_index)
+     int job_index;
+{
+  register JOB *temp;
+
+  if (js.j_jobslots == 0)
+    return;
+
+  if (temp = jobs[job_index])
+    temp->flags |= J_NOHUP;
+}
+
+/* Get rid of the data structure associated with a process chain. */
+int
+discard_pipeline (chain)
+     register PROCESS *chain;
+{
+  register PROCESS *this, *next;
+  int n;
+
+  this = chain;
+  n = 0;
+  do
+    {
+      next = this->next;
+      FREE (this->command);
+      free (this);
+      n++;
+      this = next;
+    }
+  while (this != chain);
+
+  return n;
+}
+
+/* Add this process to the chain being built in the_pipeline.
+   NAME is the command string that will be exec'ed later.
+   PID is the process id of the child. */
+static void
+add_process (name, pid)
+     char *name;
+     pid_t pid;
+{
+  PROCESS *t, *p;
+
+#if defined (RECYCLES_PIDS)
+  int j;
+  p = find_process (pid, 0, &j);
+  if (p)
+    {
+#  ifdef DEBUG
+      if (j == NO_JOB)
+	internal_warning ("add_process: process %5ld (%s) in the_pipeline", (long)p->pid, p->command);
+#  endif
+      if (PALIVE (p))
+	internal_warning (_("add_process: pid %5ld (%s) marked as still alive"), (long)p->pid, p->command);
+      p->running = PS_RECYCLED;		/* mark as recycled */
+    }
+#endif
+
+  t = (PROCESS *)xmalloc (sizeof (PROCESS));
+  t->next = the_pipeline;
+  t->pid = pid;
+  WSTATUS (t->status) = 0;
+  t->running = PS_RUNNING;
+  t->command = name;
+  the_pipeline = t;
+
+  if (t->next == 0)
+    t->next = t;
+  else
+    {
+      p = t->next;
+      while (p->next != t->next)
+	p = p->next;
+      p->next = t;
+    }
+}
+
+/* Create a (dummy) PROCESS with NAME, PID, and STATUS, and make it the last
+   process in jobs[JID]->pipe.  Used by the lastpipe code. */
+void
+append_process (name, pid, status, jid)
+     char *name;
+     pid_t pid;
+     int status;
+     int jid;
+{
+  PROCESS *t, *p;
+
+  t = (PROCESS *)xmalloc (sizeof (PROCESS));
+  t->next = (PROCESS *)NULL;
+  t->pid = pid;
+  /* set process exit status using offset discovered by configure */
+  t->status = (status & 0xff) << WEXITSTATUS_OFFSET;
+  t->running = PS_DONE;
+  t->command = name;
+
+  js.c_reaped++;	/* XXX */
+
+  for (p = jobs[jid]->pipe; p->next != jobs[jid]->pipe; p = p->next)
+    ;
+  p->next = t;
+  t->next = jobs[jid]->pipe;
+}
+
+#if 0
+/* Take the last job and make it the first job.  Must be called with
+   SIGCHLD blocked. */
+int
+rotate_the_pipeline ()
+{
+  PROCESS *p;
+
+  if (the_pipeline->next == the_pipeline)
+    return;
+  for (p = the_pipeline; p->next != the_pipeline; p = p->next)
+    ;
+  the_pipeline = p;
+}
+
+/* Reverse the order of the processes in the_pipeline.  Must be called with
+   SIGCHLD blocked. */
+int
+reverse_the_pipeline ()
+{
+  PROCESS *p, *n;
+
+  if (the_pipeline->next == the_pipeline)
+    return;
+
+  for (p = the_pipeline; p->next != the_pipeline; p = p->next)
+    ;
+  p->next = (PROCESS *)NULL;
+
+  n = REVERSE_LIST (the_pipeline, PROCESS *);
+
+  the_pipeline = n;
+  for (p = the_pipeline; p->next; p = p->next)
+    ;
+  p->next = the_pipeline;
+}
+#endif
+
+/* Map FUNC over the list of jobs.  If FUNC returns non-zero,
+   then it is time to stop mapping, and that is the return value
+   for map_over_jobs.  FUNC is called with a JOB, arg1, arg2,
+   and INDEX. */
+static int
+map_over_jobs (func, arg1, arg2)
+     sh_job_map_func_t *func;
+     int arg1, arg2;
+{
+  register int i;
+  int result;
+  sigset_t set, oset;
+
+  if (js.j_jobslots == 0)
+    return 0;
+
+  BLOCK_CHILD (set, oset);
+
+  /* XXX could use js.j_firstj here */
+  for (i = result = 0; i < js.j_jobslots; i++)
+    {
+#if defined (DEBUG)
+      if (i < js.j_firstj && jobs[i])
+	itrace("map_over_jobs: job %d non-null before js.j_firstj (%d)", i, js.j_firstj);
+      if (i > js.j_lastj && jobs[i])
+	itrace("map_over_jobs: job %d non-null after js.j_lastj (%d)", i, js.j_lastj);
+#endif
+      if (jobs[i])
+	{
+	  result = (*func)(jobs[i], arg1, arg2, i);
+	  if (result)
+	    break;
+	}
+    }
+
+  UNBLOCK_CHILD (oset);
+
+  return (result);
+}
+
+/* Cause all the jobs in the current pipeline to exit. */
+void
+terminate_current_pipeline ()
+{
+  if (pipeline_pgrp && pipeline_pgrp != shell_pgrp)
+    {
+      killpg (pipeline_pgrp, SIGTERM);
+      killpg (pipeline_pgrp, SIGCONT);
+    }
+}
+
+/* Cause all stopped jobs to exit. */
+void
+terminate_stopped_jobs ()
+{
+  register int i;
+
+  /* XXX could use js.j_firstj here */
+  for (i = 0; i < js.j_jobslots; i++)
+    {
+      if (jobs[i] && STOPPED (i))
+	{
+	  killpg (jobs[i]->pgrp, SIGTERM);
+	  killpg (jobs[i]->pgrp, SIGCONT);
+	}
+    }
+}
+
+/* Cause all jobs, running or stopped, to receive a hangup signal.  If
+   a job is marked J_NOHUP, don't send the SIGHUP. */
+void
+hangup_all_jobs ()
+{
+  register int i;
+
+  /* XXX could use js.j_firstj here */
+  for (i = 0; i < js.j_jobslots; i++)
+    {
+      if (jobs[i])
+	{
+	  if  (jobs[i]->flags & J_NOHUP)
+	    continue;
+	  killpg (jobs[i]->pgrp, SIGHUP);
+	  if (STOPPED (i))
+	    killpg (jobs[i]->pgrp, SIGCONT);
+	}
+    }
+}
+
+void
+kill_current_pipeline ()
+{
+  stop_making_children ();
+  start_pipeline ();
+}
+
+static PROCESS *
+find_pid_in_pipeline (pid, pipeline, alive_only)
+     pid_t pid;
+     PROCESS *pipeline;
+     int alive_only;
+{
+  PROCESS *p;
+
+  p = pipeline;
+  do
+    {
+      /* Return it if we found it.  Don't ever return a recycled pid. */
+      if (p->pid == pid && ((alive_only == 0 && PRECYCLED(p) == 0) || PALIVE(p)))
+	return (p);
+
+      p = p->next;
+    }
+  while (p != pipeline);
+  return ((PROCESS *)NULL);
+}
+
+/* Return the pipeline that PID belongs to.  Note that the pipeline
+   doesn't have to belong to a job.  Must be called with SIGCHLD blocked.
+   If JOBP is non-null, return the index of the job containing PID.  */
+static PROCESS *
+find_pipeline (pid, alive_only, jobp)
+     pid_t pid;
+     int alive_only;
+     int *jobp;		/* index into jobs list or NO_JOB */
+{
+  int job;
+  PROCESS *p;
+  struct pipeline_saver *save;
+
+  /* See if this process is in the pipeline that we are building. */
+  p = (PROCESS *)NULL;
+  if (jobp)
+    *jobp = NO_JOB;
+
+  if (the_pipeline && (p = find_pid_in_pipeline (pid, the_pipeline, alive_only)))
+    return (p);
+
+  /* Is this process in a saved pipeline? */
+  for (save = saved_pipeline; save; save = save->next)
+    if (save->pipeline && (p = find_pid_in_pipeline (pid, save->pipeline, alive_only)))
+      return (p);
+
+#if defined (PROCESS_SUBSTITUTION)
+  if (procsubs.nproc > 0 && (p = procsub_search (pid)) && ((alive_only == 0 && PRECYCLED(p) == 0) || PALIVE(p)))
+    return (p);
+#endif
+
+  job = find_job (pid, alive_only, &p);
+  if (jobp)
+    *jobp = job;
+  return (job == NO_JOB) ? (PROCESS *)NULL : jobs[job]->pipe;
+}
+
+/* Return the PROCESS * describing PID.  If JOBP is non-null return the index
+   into the jobs array of the job containing PID.  Must be called with
+   SIGCHLD blocked. */
+static PROCESS *
+find_process (pid, alive_only, jobp)
+     pid_t pid;
+     int alive_only;
+     int *jobp;		/* index into jobs list or NO_JOB */
+{
+  PROCESS *p;
+
+  p = find_pipeline (pid, alive_only, jobp);
+  while (p && p->pid != pid)
+    p = p->next;
+  return p;
+}
+
+/* Return the job index that PID belongs to, or NO_JOB if it doesn't
+   belong to any job.  Must be called with SIGCHLD blocked. */
+static int
+find_job (pid, alive_only, procp)
+     pid_t pid;
+     int alive_only;
+     PROCESS **procp;
+{
+  register int i;
+  PROCESS *p;
+
+  /* XXX could use js.j_firstj here, and should check js.j_lastj */
+  for (i = 0; i < js.j_jobslots; i++)
+    {
+#if defined (DEBUG)
+      if (i < js.j_firstj && jobs[i])
+	itrace("find_job: job %d non-null before js.j_firstj (%d)", i, js.j_firstj);
+      if (i > js.j_lastj && jobs[i])
+	itrace("find_job: job %d non-null after js.j_lastj (%d)", i, js.j_lastj);
+#endif
+      if (jobs[i])
+	{
+	  p = jobs[i]->pipe;
+
+	  do
+	    {
+	      if (p->pid == pid && ((alive_only == 0 && PRECYCLED(p) == 0) || PALIVE(p)))
+		{
+		  if (procp)
+		    *procp = p;
+		  return (i);
+		}
+
+	      p = p->next;
+	    }
+	  while (p != jobs[i]->pipe);
+	}
+    }
+
+  return (NO_JOB);
+}
+
+/* Find a job given a PID.  If BLOCK is non-zero, block SIGCHLD as
+   required by find_job. */
+int
+get_job_by_pid (pid, block, procp)
+     pid_t pid;
+     int block;
+     PROCESS **procp;
+{
+  int job;
+  sigset_t set, oset;
+
+  if (block)
+    BLOCK_CHILD (set, oset);
+
+  job = find_job (pid, 0, procp);
+
+  if (block)
+    UNBLOCK_CHILD (oset);
+
+  return job;
+}
+
+/* Print descriptive information about the job with leader pid PID. */
+void
+describe_pid (pid)
+     pid_t pid;
+{
+  int job;
+  sigset_t set, oset;
+
+  BLOCK_CHILD (set, oset);
+
+  job = find_job (pid, 0, NULL);
+
+  if (job != NO_JOB)
+    fprintf (stderr, "[%d] %ld\n", job + 1, (long)pid);
+  else
+    programming_error (_("describe_pid: %ld: no such pid"), (long)pid);
+
+  UNBLOCK_CHILD (oset);
+}
+
+static char *
+j_strsignal (s)
+     int s;
+{
+  char *x;
+
+  x = strsignal (s);
+  if (x == 0)
+    {
+      x = retcode_name_buffer;
+      snprintf (x, sizeof(retcode_name_buffer), _("Signal %d"), s);
+    }
+  return x;
+}
+
+static char *
+printable_job_status (j, p, format)
+     int j;
+     PROCESS *p;
+     int format;
+{
+  static char *temp;
+  int es;
+
+  temp = _("Done");
+
+  if (STOPPED (j) && format == 0)
+    {
+      if (posixly_correct == 0 || p == 0 || (WIFSTOPPED (p->status) == 0))
+	temp = _("Stopped");
+      else
+	{
+	  temp = retcode_name_buffer;
+	  snprintf (temp, sizeof(retcode_name_buffer), _("Stopped(%s)"), signal_name (WSTOPSIG (p->status)));
+	}
+    }
+  else if (RUNNING (j))
+    temp = _("Running");
+  else
+    {
+      if (WIFSTOPPED (p->status))
+	temp = j_strsignal (WSTOPSIG (p->status));
+      else if (WIFSIGNALED (p->status))
+	temp = j_strsignal (WTERMSIG (p->status));
+      else if (WIFEXITED (p->status))
+	{
+	  temp = retcode_name_buffer;
+	  es = WEXITSTATUS (p->status);
+	  if (es == 0)
+	    {
+	      strncpy (temp, _("Done"), sizeof (retcode_name_buffer) - 1);
+	      temp[sizeof (retcode_name_buffer) - 1] = '\0';
+	    }
+	  else if (posixly_correct)
+	    snprintf (temp, sizeof(retcode_name_buffer), _("Done(%d)"), es);
+	  else
+	    snprintf (temp, sizeof(retcode_name_buffer), _("Exit %d"), es);
+	}
+      else
+	temp = _("Unknown status");
+    }
+
+  return temp;
+}
+
+/* This is the way to print out information on a job if you
+   know the index.  FORMAT is:
+
+    JLIST_NORMAL)   [1]+ Running	   emacs
+    JLIST_LONG  )   [1]+ 2378 Running      emacs
+    -1	  )   [1]+ 2378	      emacs
+
+    JLIST_NORMAL)   [1]+ Stopped	   ls | more
+    JLIST_LONG  )   [1]+ 2369 Stopped      ls
+			 2367	    | more
+    JLIST_PID_ONLY)
+	Just list the pid of the process group leader (really
+	the process group).
+    JLIST_CHANGED_ONLY)
+	Use format JLIST_NORMAL, but list only jobs about which
+	the user has not been notified. */
+
+/* Print status for pipeline P.  If JOB_INDEX is >= 0, it is the index into
+   the JOBS array corresponding to this pipeline.  FORMAT is as described
+   above.  Must be called with SIGCHLD blocked.
+
+   If you're printing a pipeline that's not in the jobs array, like the
+   current pipeline as it's being created, pass -1 for JOB_INDEX */
+static void
+print_pipeline (p, job_index, format, stream)
+     PROCESS *p;
+     int job_index, format;
+     FILE *stream;
+{
+  PROCESS *first, *last, *show;
+  int es, name_padding;
+  char *temp;
+
+  if (p == 0)
+    return;
+
+  first = last = p;
+  while (last->next != first)
+    last = last->next;
+
+  for (;;)
+    {
+      if (p != first)
+	fprintf (stream, format ? "     " : " |");
+
+      if (format != JLIST_STANDARD)
+	fprintf (stream, "%5ld", (long)p->pid);
+
+      fprintf (stream, " ");
+
+      if (format > -1 && job_index >= 0)
+	{
+	  show = format ? p : last;
+	  temp = printable_job_status (job_index, show, format);
+
+	  if (p != first)
+	    {
+	      if (format)
+		{
+		  if (show->running == first->running &&
+		      WSTATUS (show->status) == WSTATUS (first->status))
+		    temp = "";
+		}
+	      else
+		temp = (char *)NULL;
+	    }
+
+	  if (temp)
+	    {
+	      fprintf (stream, "%s", temp);
+
+	      es = STRLEN (temp);
+	      if (es == 0)
+		es = 2;	/* strlen ("| ") */
+	      name_padding = LONGEST_SIGNAL_DESC - es;
+
+	      fprintf (stream, "%*s", name_padding, "");
+
+	      if ((WIFSTOPPED (show->status) == 0) &&
+		  (WIFCONTINUED (show->status) == 0) &&
+		  WIFCORED (show->status))
+		fprintf (stream, _("(core dumped) "));
+	    }
+	}
+
+      if (p != first && format)
+	fprintf (stream, "| ");
+
+      if (p->command)
+	fprintf (stream, "%s", p->command);
+
+      if (p == last && job_index >= 0)
+	{
+	  temp = current_working_directory ();
+
+	  if (RUNNING (job_index) && (IS_FOREGROUND (job_index) == 0))
+	    fprintf (stream, " &");
+
+	  if (strcmp (temp, jobs[job_index]->wd) != 0)
+	    fprintf (stream,
+	      _("  (wd: %s)"), polite_directory_format (jobs[job_index]->wd));
+	}
+
+      if (format || (p == last))
+	{
+	  /* We need to add a CR only if this is an interactive shell, and
+	     we're reporting the status of a completed job asynchronously.
+	     We can't really check whether this particular job is being
+	     reported asynchronously, so just add the CR if the shell is
+	     currently interactive and asynchronous notification is enabled. */
+	  if (asynchronous_notification && interactive)
+	    putc ('\r', stream);
+	  fprintf (stream, "\n");
+	}
+
+      if (p == last)
+	break;
+      p = p->next;
+    }
+  fflush (stream);
+}
+
+/* Print information to STREAM about jobs[JOB_INDEX] according to FORMAT.
+   Must be called with SIGCHLD blocked or queued with queue_sigchld */
+static void
+pretty_print_job (job_index, format, stream)
+     int job_index, format;
+     FILE *stream;
+{
+  register PROCESS *p;
+
+  /* Format only pid information about the process group leader? */
+  if (format == JLIST_PID_ONLY)
+    {
+      fprintf (stream, "%ld\n", (long)jobs[job_index]->pipe->pid);
+      return;
+    }
+
+  if (format == JLIST_CHANGED_ONLY)
+    {
+      if (IS_NOTIFIED (job_index))
+	return;
+      format = JLIST_STANDARD;
+    }
+
+  if (format != JLIST_NONINTERACTIVE)
+    fprintf (stream, "[%d]%c ", job_index + 1,
+	      (job_index == js.j_current) ? '+':
+		(job_index == js.j_previous) ? '-' : ' ');
+
+  if (format == JLIST_NONINTERACTIVE)
+    format = JLIST_LONG;
+
+  p = jobs[job_index]->pipe;
+
+  print_pipeline (p, job_index, format, stream);
+
+  /* We have printed information about this job.  When the job's
+     status changes, waitchld () sets the notification flag to 0. */
+  jobs[job_index]->flags |= J_NOTIFIED;
+}
+
+static int
+print_job (job, format, state, job_index)
+     JOB *job;
+     int format, state, job_index;
+{
+  if (state == -1 || (JOB_STATE)state == job->state)
+    pretty_print_job (job_index, format, stdout);
+  return (0);
+}
+
+void
+list_one_job (job, format, ignore, job_index)
+     JOB *job;
+     int format, ignore, job_index;
+{
+  pretty_print_job (job_index, format, stdout);
+  cleanup_dead_jobs ();
+}
+
+void
+list_stopped_jobs (format)
+     int format;
+{
+  cleanup_dead_jobs ();
+  map_over_jobs (print_job, format, (int)JSTOPPED);
+}
+
+void
+list_running_jobs (format)
+     int format;
+{
+  cleanup_dead_jobs ();
+  map_over_jobs (print_job, format, (int)JRUNNING);
+}
+
+/* List jobs.  If FORMAT is non-zero, then the long form of the information
+   is printed, else just a short version. */
+void
+list_all_jobs (format)
+     int format;
+{
+  cleanup_dead_jobs ();
+  map_over_jobs (print_job, format, -1);
+}
+
+/* Fork, handling errors.  Returns the pid of the newly made child, or 0.
+   COMMAND is just for remembering the name of the command; we don't do
+   anything else with it.  ASYNC_P says what to do with the tty.  If
+   non-zero, then don't give it away. */
+pid_t
+make_child (command, flags)
+     char *command;
+     int flags;
+{
+  int async_p, forksleep;
+  sigset_t set, oset, termset, chldset, oset_copy;
+  pid_t pid;
+  SigHandler *oterm;
+
+  sigemptyset (&oset_copy);
+  sigprocmask (SIG_BLOCK, (sigset_t *)NULL, &oset_copy);
+  sigaddset (&oset_copy, SIGTERM);
+
+  /* Block SIGTERM here and unblock in child after fork resets the
+     set of pending signals. */
+  sigemptyset (&set);
+  sigaddset (&set, SIGCHLD);
+  sigaddset (&set, SIGINT);
+  sigaddset (&set, SIGTERM);
+
+  sigemptyset (&oset);
+  sigprocmask (SIG_BLOCK, &set, &oset);
+
+  /* Blocked in the parent, child will receive it after unblocking SIGTERM */
+  if (interactive_shell)
+    oterm = set_signal_handler (SIGTERM, SIG_DFL);
+
+  making_children ();
+
+  async_p = (flags & FORK_ASYNC);
+  forksleep = 1;
+
+#if defined (BUFFERED_INPUT)
+  /* If default_buffered_input is active, we are reading a script.  If
+     the command is asynchronous, we have already duplicated /dev/null
+     as fd 0, but have not changed the buffered stream corresponding to
+     the old fd 0.  We don't want to sync the stream in this case. */
+  if (default_buffered_input != -1 &&
+      (!async_p || default_buffered_input > 0))
+    sync_buffered_stream (default_buffered_input);
+#endif /* BUFFERED_INPUT */
+
+  /* Create the child, handle severe errors.  Retry on EAGAIN. */
+  while ((pid = fork ()) < 0 && errno == EAGAIN && forksleep < FORKSLEEP_MAX)
+    {
+      /* bash-4.2 */
+      /* keep SIGTERM blocked until we reset the handler to SIG_IGN */
+      sigprocmask (SIG_SETMASK, &oset_copy, (sigset_t *)NULL);
+      /* If we can't create any children, try to reap some dead ones. */
+      waitchld (-1, 0);
+
+      errno = EAGAIN;		/* restore errno */
+      sys_error ("fork: retry");
+
+      if (sleep (forksleep) != 0)
+	break;
+      forksleep <<= 1;
+
+      if (interrupt_state)
+	break;
+      sigprocmask (SIG_SETMASK, &set, (sigset_t *)NULL);
+    }
+
+  if (pid != 0)
+    if (interactive_shell)
+      set_signal_handler (SIGTERM, oterm);
+
+  if (pid < 0)
+    {
+      sys_error ("fork");
+
+      /* Kill all of the processes in the current pipeline. */
+      terminate_current_pipeline ();
+
+      /* Discard the current pipeline, if any. */
+      if (the_pipeline)
+	kill_current_pipeline ();
+
+      set_exit_status (EX_NOEXEC);
+      throw_to_top_level ();	/* Reset signals, etc. */
+    }
+
+  if (pid == 0)
+    {
+      /* In the child.  Give this child the right process group, set the
+	 signals to the default state for a new process. */
+      pid_t mypid;
+
+      /* If this ends up being changed to modify or use `command' in the
+	 child process, go back and change callers who free `command' in
+	 the child process when this returns. */
+      mypid = getpid ();
+#if defined (BUFFERED_INPUT)
+      /* Close default_buffered_input if it's > 0.  We don't close it if it's
+	 0 because that's the file descriptor used when redirecting input,
+	 and it's wrong to close the file in that case. */
+      unset_bash_input (0);
+#endif /* BUFFERED_INPUT */
+
+      CLRINTERRUPT;	/* XXX - children have their own interrupt state */
+
+      /* Restore top-level signal mask, including unblocking SIGTERM */
+      restore_sigmask ();
+  
+      if (job_control)
+	{
+	  /* All processes in this pipeline belong in the same
+	     process group. */
+
+	  if (pipeline_pgrp == 0)	/* This is the first child. */
+	    pipeline_pgrp = mypid;
+
+	  /* Check for running command in backquotes. */
+	  if (pipeline_pgrp == shell_pgrp)
+	    ignore_tty_job_signals ();
+	  else
+	    default_tty_job_signals ();
+
+	  /* Set the process group before trying to mess with the terminal's
+	     process group.  This is mandated by POSIX. */
+	  /* This is in accordance with the Posix 1003.1 standard,
+	     section B.7.2.4, which says that trying to set the terminal
+	     process group with tcsetpgrp() to an unused pgrp value (like
+	     this would have for the first child) is an error.  Section
+	     B.4.3.3, p. 237 also covers this, in the context of job control
+	     shells. */
+	  if (setpgid (mypid, pipeline_pgrp) < 0)
+	    sys_error (_("child setpgid (%ld to %ld)"), (long)mypid, (long)pipeline_pgrp);
+
+	  /* By convention (and assumption above), if
+	     pipeline_pgrp == shell_pgrp, we are making a child for
+	     command substitution.
+	     In this case, we don't want to give the terminal to the
+	     shell's process group (we could be in the middle of a
+	     pipeline, for example). */
+	  if ((flags & FORK_NOTERM) == 0 && async_p == 0 && pipeline_pgrp != shell_pgrp && ((subshell_environment&(SUBSHELL_ASYNC|SUBSHELL_PIPE)) == 0) && running_in_background == 0)
+	    give_terminal_to (pipeline_pgrp, 0);
+
+#if defined (PGRP_PIPE)
+	  if (pipeline_pgrp == mypid)
+	    pipe_read (pgrp_pipe);
+#endif
+	}
+      else			/* Without job control... */
+	{
+	  if (pipeline_pgrp == 0)
+	    pipeline_pgrp = shell_pgrp;
+
+	  /* If these signals are set to SIG_DFL, we encounter the curious
+	     situation of an interactive ^Z to a running process *working*
+	     and stopping the process, but being unable to do anything with
+	     that process to change its state.  On the other hand, if they
+	     are set to SIG_IGN, jobs started from scripts do not stop when
+	     the shell running the script gets a SIGTSTP and stops. */
+
+	  default_tty_job_signals ();
+	}
+
+#if defined (PGRP_PIPE)
+      /* Release the process group pipe, since our call to setpgid ()
+	 is done.  The last call to sh_closepipe is done in stop_pipeline. */
+      sh_closepipe (pgrp_pipe);
+#endif /* PGRP_PIPE */
+
+      /* Don't set last_asynchronous_pid in the child */
+
+#if defined (RECYCLES_PIDS)
+      if (last_asynchronous_pid == mypid)
+	/* Avoid pid aliasing.  1 seems like a safe, unusual pid value. */
+	last_asynchronous_pid = 1;
+#endif
+    }
+  else
+    {
+      /* In the parent.  Remember the pid of the child just created
+	 as the proper pgrp if this is the first child. */
+
+      if (job_control)
+	{
+	  if (pipeline_pgrp == 0)
+	    {
+	      pipeline_pgrp = pid;
+	      /* Don't twiddle terminal pgrps in the parent!  This is the bug,
+		 not the good thing of twiddling them in the child! */
+	      /* give_terminal_to (pipeline_pgrp, 0); */
+	    }
+	  /* This is done on the recommendation of the Rationale section of
+	     the POSIX 1003.1 standard, where it discusses job control and
+	     shells.  It is done to avoid possible race conditions. (Ref.
+	     1003.1 Rationale, section B.4.3.3, page 236). */
+	  setpgid (pid, pipeline_pgrp);
+	}
+      else
+	{
+	  if (pipeline_pgrp == 0)
+	    pipeline_pgrp = shell_pgrp;
+	}
+
+      /* Place all processes into the jobs array regardless of the
+	 state of job_control. */
+      add_process (command, pid);
+
+      if (async_p)
+	last_asynchronous_pid = pid;
+#if defined (RECYCLES_PIDS)
+      else if (last_asynchronous_pid == pid)
+	/* Avoid pid aliasing.  1 seems like a safe, unusual pid value. */
+	last_asynchronous_pid = 1;
+#endif
+
+      /* Delete the saved status for any job containing this PID in case it's
+	 been reused. */
+      delete_old_job (pid);
+
+      /* Perform the check for pid reuse unconditionally.  Some systems reuse
+	 PIDs before giving a process CHILD_MAX/_SC_CHILD_MAX unique ones. */
+      bgp_delete (pid);		/* new process, discard any saved status */
+
+      last_made_pid = pid;
+
+      /* keep stats */
+      js.c_totforked++;
+      js.c_living++;
+
+      /* Unblock SIGTERM, SIGINT, and SIGCHLD unless creating a pipeline, in
+	 which case SIGCHLD remains blocked until all commands in the pipeline
+	 have been created (execute_cmd.c:execute_pipeline()). */
+      sigprocmask (SIG_SETMASK, &oset, (sigset_t *)NULL);
+    }
+
+  return (pid);
+}
+
+/* These two functions are called only in child processes. */
+void
+ignore_tty_job_signals ()
+{
+  set_signal_handler (SIGTSTP, SIG_IGN);
+  set_signal_handler (SIGTTIN, SIG_IGN);
+  set_signal_handler (SIGTTOU, SIG_IGN);
+}
+
+/* Reset the tty-generated job control signals to SIG_DFL unless that signal
+   was ignored at entry to the shell, in which case we need to set it to
+   SIG_IGN in the child.  We can't rely on resetting traps, since the hard
+   ignored signals can't be trapped. */
+void
+default_tty_job_signals ()
+{
+  if (signal_is_trapped (SIGTSTP) == 0 && signal_is_hard_ignored (SIGTSTP))
+    set_signal_handler (SIGTSTP, SIG_IGN);
+  else
+    set_signal_handler (SIGTSTP, SIG_DFL);
+
+  if (signal_is_trapped (SIGTTIN) == 0 && signal_is_hard_ignored (SIGTTIN))
+    set_signal_handler (SIGTTIN, SIG_IGN);
+  else
+    set_signal_handler (SIGTTIN, SIG_DFL);
+
+  if (signal_is_trapped (SIGTTOU) == 0 && signal_is_hard_ignored (SIGTTOU))
+    set_signal_handler (SIGTTOU, SIG_IGN);
+  else
+    set_signal_handler (SIGTTOU, SIG_DFL);
+}
+
+/* Called once in a parent process. */
+void
+get_original_tty_job_signals ()
+{
+  static int fetched = 0;
+
+  if (fetched == 0)
+    {
+      if (interactive_shell)
+	{
+	  set_original_signal (SIGTSTP, SIG_DFL);
+	  set_original_signal (SIGTTIN, SIG_DFL);
+	  set_original_signal (SIGTTOU, SIG_DFL);
+	}
+      else
+	{
+	  get_original_signal (SIGTSTP);
+	  get_original_signal (SIGTTIN);
+	  get_original_signal (SIGTTOU);
+	}
+      fetched = 1;
+    }
+}
+
+/* When we end a job abnormally, or if we stop a job, we set the tty to the
+   state kept in here.  When a job ends normally, we set the state in here
+   to the state of the tty. */
+
+static TTYSTRUCT shell_tty_info;
+
+#if defined (NEW_TTY_DRIVER)
+static struct tchars shell_tchars;
+static struct ltchars shell_ltchars;
+#endif /* NEW_TTY_DRIVER */
+
+#if defined (NEW_TTY_DRIVER) && defined (DRAIN_OUTPUT)
+/* Since the BSD tty driver does not allow us to change the tty modes
+   while simultaneously waiting for output to drain and preserving
+   typeahead, we have to drain the output ourselves before calling
+   ioctl.  We cheat by finding the length of the output queue, and
+   using select to wait for an appropriate length of time.  This is
+   a hack, and should be labeled as such (it's a hastily-adapted
+   mutation of a `usleep' implementation).  It's only reason for
+   existing is the flaw in the BSD tty driver. */
+
+static int ttspeeds[] =
+{
+  0, 50, 75, 110, 134, 150, 200, 300, 600, 1200,
+  1800, 2400, 4800, 9600, 19200, 38400
+};
+
+static void
+draino (fd, ospeed)
+     int fd, ospeed;
+{
+  register int delay = ttspeeds[ospeed];
+  int n;
+
+  if (!delay)
+    return;
+
+  while ((ioctl (fd, TIOCOUTQ, &n) == 0) && n)
+    {
+      if (n > (delay / 100))
+	{
+	  struct timeval tv;
+
+	  n *= 10;		/* 2 bits more for conservativeness. */
+	  tv.tv_sec = n / delay;
+	  tv.tv_usec = ((n % delay) * 1000000) / delay;
+	  select (fd, (fd_set *)0, (fd_set *)0, (fd_set *)0, &tv);
+	}
+      else
+	break;
+    }
+}
+#endif /* NEW_TTY_DRIVER && DRAIN_OUTPUT */
+
+/* Return the fd from which we are actually getting input. */
+#define input_tty() (shell_tty != -1) ? shell_tty : fileno (stderr)
+
+/* Fill the contents of shell_tty_info with the current tty info. */
+int
+get_tty_state ()
+{
+  int tty;
+
+  tty = input_tty ();
+  if (tty != -1)
+    {
+#if defined (NEW_TTY_DRIVER)
+      ioctl (tty, TIOCGETP, &shell_tty_info);
+      ioctl (tty, TIOCGETC, &shell_tchars);
+      ioctl (tty, TIOCGLTC, &shell_ltchars);
+#endif /* NEW_TTY_DRIVER */
+
+#if defined (TERMIO_TTY_DRIVER)
+      ioctl (tty, TCGETA, &shell_tty_info);
+#endif /* TERMIO_TTY_DRIVER */
+
+#if defined (TERMIOS_TTY_DRIVER)
+      if (tcgetattr (tty, &shell_tty_info) < 0)
+	{
+#if 0
+	  /* Only print an error message if we're really interactive at
+	     this time. */
+	  if (interactive)
+	    sys_error ("[%ld: %d (%d)] tcgetattr", (long)getpid (), shell_level, tty);
+#endif
+	  return -1;
+	}
+#endif /* TERMIOS_TTY_DRIVER */
+      if (check_window_size)
+	get_new_window_size (0, (int *)0, (int *)0);
+    }
+  return 0;
+}
+
+/* Make the current tty use the state in shell_tty_info. */
+int
+set_tty_state ()
+{
+  int tty;
+
+  tty = input_tty ();
+  if (tty != -1)
+    {
+#if defined (NEW_TTY_DRIVER)
+#  if defined (DRAIN_OUTPUT)
+      draino (tty, shell_tty_info.sg_ospeed);
+#  endif /* DRAIN_OUTPUT */
+      ioctl (tty, TIOCSETN, &shell_tty_info);
+      ioctl (tty, TIOCSETC, &shell_tchars);
+      ioctl (tty, TIOCSLTC, &shell_ltchars);
+#endif /* NEW_TTY_DRIVER */
+
+#if defined (TERMIO_TTY_DRIVER)
+      ioctl (tty, TCSETAW, &shell_tty_info);
+#endif /* TERMIO_TTY_DRIVER */
+
+#if defined (TERMIOS_TTY_DRIVER)
+      if (tcsetattr (tty, TCSADRAIN, &shell_tty_info) < 0)
+	{
+	  /* Only print an error message if we're really interactive at
+	     this time. */
+	  if (interactive)
+	    sys_error ("[%ld: %d (%d)] tcsetattr", (long)getpid (), shell_level, tty);
+	  return -1;
+	}
+#endif /* TERMIOS_TTY_DRIVER */
+    }
+  return 0;
+}
+
+/* Given an index into the jobs array JOB, return the PROCESS struct of the last
+   process in that job's pipeline.  This is the one whose exit status
+   counts.  Must be called with SIGCHLD blocked or queued. */
+static PROCESS *
+find_last_proc (job, block)
+     int job;
+     int block;
+{
+  register PROCESS *p;
+  sigset_t set, oset;
+
+  if (block)
+    BLOCK_CHILD (set, oset);
+
+  p = jobs[job]->pipe;
+  while (p && p->next != jobs[job]->pipe)
+    p = p->next;
+
+  if (block)
+    UNBLOCK_CHILD (oset);
+
+  return (p);
+}
+
+static pid_t
+find_last_pid (job, block)
+     int job;
+     int block;
+{
+  PROCESS *p;
+
+  p = find_last_proc (job, block);
+  /* Possible race condition here. */
+  return p->pid;
+}     
+
+/* Wait for a particular child of the shell to finish executing.
+   This low-level function prints an error message if PID is not
+   a child of this shell.  It returns -1 if it fails, or whatever
+   wait_for returns otherwise.  If the child is not found in the
+   jobs table, it returns 127.  If FLAGS doesn't include JWAIT_PERROR,
+   we suppress the error message if PID isn't found. */
+
+int
+wait_for_single_pid (pid, flags)
+     pid_t pid;
+     int flags;
+{
+  register PROCESS *child;
+  sigset_t set, oset;
+  int r, job, alive;
+
+  BLOCK_CHILD (set, oset);
+  child = find_pipeline (pid, 0, (int *)NULL);
+  UNBLOCK_CHILD (oset);
+
+  if (child == 0)
+    {
+      r = bgp_search (pid);
+      if (r >= 0)
+	return r;
+    }
+
+  if (child == 0)
+    {
+      if (flags & JWAIT_PERROR)
+	internal_error (_("wait: pid %ld is not a child of this shell"), (long)pid);
+      return (127);
+    }
+
+  alive = 0;
+  do
+    {
+      r = wait_for (pid, 0);
+      if ((flags & JWAIT_FORCE) == 0)
+	break;
+
+      BLOCK_CHILD (set, oset);
+      alive = PALIVE (child);
+      UNBLOCK_CHILD (oset);
+    }
+  while (alive);
+
+  /* POSIX.2: if we just waited for a job, we can remove it from the jobs
+     table. */
+  BLOCK_CHILD (set, oset);
+  job = find_job (pid, 0, NULL);
+  if (job != NO_JOB && jobs[job] && DEADJOB (job))
+    jobs[job]->flags |= J_NOTIFIED;
+  UNBLOCK_CHILD (oset);
+
+  /* If running in posix mode, remove the job from the jobs table immediately */
+  if (posixly_correct)
+    {
+      cleanup_dead_jobs ();
+      bgp_delete (pid);
+    }
+
+  /* Check for a trapped signal interrupting the wait builtin and jump out */
+  CHECK_WAIT_INTR;
+
+  return r;
+}
+
+/* Wait for all of the background processes started by this shell to finish. */
+void
+wait_for_background_pids (ps)
+     struct procstat *ps;
+{
+  register int i, r;
+  int any_stopped, check_async;
+  sigset_t set, oset;
+  pid_t pid;
+
+  for (any_stopped = 0, check_async = 1;;)
+    {
+      BLOCK_CHILD (set, oset);
+
+      /* find first running job; if none running in foreground, break */
+      /* XXX could use js.j_firstj and js.j_lastj here */
+      for (i = 0; i < js.j_jobslots; i++)
+	{
+#if defined (DEBUG)
+	  if (i < js.j_firstj && jobs[i])
+	    itrace("wait_for_background_pids: job %d non-null before js.j_firstj (%d)", i, js.j_firstj);
+	  if (i > js.j_lastj && jobs[i])
+	    itrace("wait_for_background_pids: job %d non-null after js.j_lastj (%d)", i, js.j_lastj);
+#endif
+	  if (jobs[i] && STOPPED (i))
+	    {
+	      builtin_warning ("job %d[%d] stopped", i+1, find_last_pid (i, 0));
+	      any_stopped = 1;
+	    }
+
+	  if (jobs[i] && RUNNING (i) && IS_FOREGROUND (i) == 0)
+	    break;
+	}
+      if (i == js.j_jobslots)
+	{
+	  UNBLOCK_CHILD (oset);
+	  break;
+	}
+
+      /* now wait for the last pid in that job. */
+      pid = find_last_pid (i, 0);
+      UNBLOCK_CHILD (oset);
+      QUIT;
+      errno = 0;		/* XXX */
+      r = wait_for_single_pid (pid, JWAIT_PERROR);
+      if (ps)
+	{
+	  ps->pid = pid;
+	  ps->status = (r < 0) ? 127 : r;
+	}
+      if (r == -1 && errno == ECHILD)
+	{
+	  /* If we're mistaken about job state, compensate. */
+	  check_async = 0;
+	  mark_all_jobs_as_dead ();
+	}
+    }
+
+#if defined (PROCESS_SUBSTITUTION)
+  procsub_waitall ();
+#endif
+      
+  /* POSIX.2 says the shell can discard the statuses of all completed jobs if
+     `wait' is called with no arguments. */
+  mark_dead_jobs_as_notified (1);
+  cleanup_dead_jobs ();
+  bgp_clear ();
+}
+
+/* Make OLD_SIGINT_HANDLER the SIGINT signal handler. */
+#define INVALID_SIGNAL_HANDLER (SigHandler *)wait_for_background_pids
+static SigHandler *old_sigint_handler = INVALID_SIGNAL_HANDLER;
+
+static int wait_sigint_received;
+static int child_caught_sigint;
+
+int waiting_for_child;
+
+/* Clean up state after longjmp to wait_intr_buf */
+void
+wait_sigint_cleanup ()
+{
+  queue_sigchld = 0;
+  waiting_for_child = 0;
+}
+
+static void
+restore_sigint_handler ()
+{
+  if (old_sigint_handler != INVALID_SIGNAL_HANDLER)
+    {
+      set_signal_handler (SIGINT, old_sigint_handler);
+      old_sigint_handler = INVALID_SIGNAL_HANDLER;
+      waiting_for_child = 0;
+    }
+}
+
+/* Handle SIGINT while we are waiting for children in a script to exit.
+   The `wait' builtin should be interruptible, but all others should be
+   effectively ignored (i.e. not cause the shell to exit). */
+static sighandler
+wait_sigint_handler (sig)
+     int sig;
+{
+  SigHandler *sigint_handler;
+
+  if (this_shell_builtin && this_shell_builtin == wait_builtin)
+    {
+      set_exit_status (128+SIGINT);
+      restore_sigint_handler ();
+      /* If we got a SIGINT while in `wait', and SIGINT is trapped, do
+	 what POSIX.2 says (see builtins/wait.def for more info). */
+      if (this_shell_builtin && this_shell_builtin == wait_builtin &&
+	  signal_is_trapped (SIGINT) &&
+	  ((sigint_handler = trap_to_sighandler (SIGINT)) == trap_handler))
+	{
+	  trap_handler (SIGINT);	/* set pending_traps[SIGINT] */
+	  wait_signal_received = SIGINT;
+	  if (wait_intr_flag)
+	    sh_longjmp (wait_intr_buf, 1);
+	  else
+	    /* Let CHECK_WAIT_INTR handle it in wait_for/waitchld */
+	    SIGRETURN (0);
+	}
+      else /* wait_builtin but signal not trapped, treat as interrupt */
+	kill (getpid (), SIGINT);
+    }
+
+  /* XXX - should this be interrupt_state?  If it is, the shell will act
+     as if it got the SIGINT interrupt. */
+  if (waiting_for_child)
+    wait_sigint_received = 1;
+  else
+    {
+      set_exit_status (128+SIGINT);
+      restore_sigint_handler ();
+      kill (getpid (), SIGINT);
+    }
+
+  /* Otherwise effectively ignore the SIGINT and allow the running job to
+     be killed. */
+  SIGRETURN (0);
+}
+
+static int
+process_exit_signal (status)
+     WAIT status;
+{
+  return (WIFSIGNALED (status) ? WTERMSIG (status) : 0);
+}
+
+static int
+process_exit_status (status)
+     WAIT status;
+{
+  if (WIFSIGNALED (status))
+    return (128 + WTERMSIG (status));
+  else if (WIFSTOPPED (status) == 0)
+    return (WEXITSTATUS (status));
+  else
+    return (EXECUTION_SUCCESS);
+}
+
+static WAIT
+job_signal_status (job)
+     int job;
+{
+  register PROCESS *p;
+  WAIT s;
+
+  p = jobs[job]->pipe;
+  do
+    {
+      s = p->status;
+      if (WIFSIGNALED(s) || WIFSTOPPED(s))
+	break;
+      p = p->next;
+    }
+  while (p != jobs[job]->pipe);
+
+  return s;
+}
+  
+/* Return the exit status of the last process in the pipeline for job JOB.
+   This is the exit status of the entire job. */
+static WAIT
+raw_job_exit_status (job)
+     int job;
+{
+  register PROCESS *p;
+  int fail;
+  WAIT ret;
+
+  if (jobs[job]->flags & J_PIPEFAIL)
+    {
+      fail = 0;
+      p = jobs[job]->pipe;
+      do
+	{
+	  if (WSTATUS (p->status) != EXECUTION_SUCCESS)
+	    fail = WSTATUS(p->status);
+	  p = p->next;
+	}
+      while (p != jobs[job]->pipe);
+      WSTATUS (ret) = fail;
+      return ret;
+    }
+
+  for (p = jobs[job]->pipe; p->next != jobs[job]->pipe; p = p->next)
+    ;
+  return (p->status);
+}
+
+/* Return the exit status of job JOB.  This is the exit status of the last
+   (rightmost) process in the job's pipeline, modified if the job was killed
+   by a signal or stopped. */
+int
+job_exit_status (job)
+     int job;
+{
+  return (process_exit_status (raw_job_exit_status (job)));
+}
+
+int
+job_exit_signal (job)
+     int job;
+{
+  return (process_exit_signal (raw_job_exit_status (job)));
+}
+
+#define FIND_CHILD(pid, child) \
+  do \
+    { \
+      child = find_pipeline (pid, 0, (int *)NULL); \
+      if (child == 0) \
+	{ \
+	  give_terminal_to (shell_pgrp, 0); \
+	  UNBLOCK_CHILD (oset); \
+	  internal_error (_("wait_for: No record of process %ld"), (long)pid); \
+	  restore_sigint_handler (); \
+	  return (termination_state = 127); \
+	} \
+    } \
+  while (0)
+
+/* Wait for pid (one of our children) to terminate, then
+   return the termination state.  Returns 127 if PID is not found in
+   the jobs table.  Returns -1 if waitchld() returns -1, indicating
+   that there are no unwaited-for child processes. */
+int
+wait_for (pid, flags)
+     pid_t pid;
+     int flags;
+{
+  int job, termination_state, r;
+  WAIT s;
+  register PROCESS *child;
+  sigset_t set, oset;
+
+  /* In the case that this code is interrupted, and we longjmp () out of it,
+     we are relying on the code in throw_to_top_level () to restore the
+     top-level signal mask. */
+  child = 0;
+  BLOCK_CHILD (set, oset);
+
+  /* Ignore interrupts while waiting for a job run without job control
+     to finish.  We don't want the shell to exit if an interrupt is
+     received, only if one of the jobs run is killed via SIGINT.  If
+     job control is not set, the job will be run in the same pgrp as
+     the shell, and the shell will see any signals the job gets.  In
+     fact, we want this set every time the waiting shell and the waited-
+     for process are in the same process group, including command
+     substitution. */
+
+  /* This is possibly a race condition -- should it go in stop_pipeline? */
+  wait_sigint_received = child_caught_sigint = 0;
+  if (job_control == 0 || (subshell_environment&SUBSHELL_COMSUB))
+    {
+      SigHandler *temp_sigint_handler;
+
+      temp_sigint_handler = set_signal_handler (SIGINT, wait_sigint_handler);
+      if (temp_sigint_handler == wait_sigint_handler)
+	{
+#if defined (DEBUG)
+	  internal_warning ("wait_for: recursively setting old_sigint_handler to wait_sigint_handler: running_trap = %d", running_trap);
+#endif
+	}
+      else
+	old_sigint_handler = temp_sigint_handler;
+      waiting_for_child = 0;
+      if (old_sigint_handler == SIG_IGN)
+	set_signal_handler (SIGINT, old_sigint_handler);
+    }
+
+  termination_state = last_command_exit_value;
+
+  if (interactive && job_control == 0)
+    QUIT;
+  /* Check for terminating signals and exit the shell if we receive one */
+  CHECK_TERMSIG;
+
+  /* Check for a trapped signal interrupting the wait builtin and jump out */
+  CHECK_WAIT_INTR;
+
+  /* If we say wait_for (), then we have a record of this child somewhere.
+     If it and none of its peers are running, don't call waitchld(). */
+
+  job = NO_JOB;
+  do
+    {
+      if (pid != ANY_PID)
+	FIND_CHILD (pid, child);
+
+      /* If this child is part of a job, then we are really waiting for the
+	 job to finish.  Otherwise, we are waiting for the child to finish.
+	 We check for JDEAD in case the job state has been set by waitchld
+	 after receipt of a SIGCHLD. */
+      if (job == NO_JOB && pid != ANY_PID)	/* XXX -- && pid != ANY_PID ? */
+	job = find_job (pid, 0, NULL);
+
+      /* waitchld() takes care of setting the state of the job.  If the job
+	 has already exited before this is called, sigchld_handler will have
+	 called waitchld and the state will be set to JDEAD. */
+
+      if (pid == ANY_PID || PRUNNING(child) || (job != NO_JOB && RUNNING (job)))
+	{
+	  int old_waiting;
+
+	  queue_sigchld = 1;
+	  old_waiting = waiting_for_child;
+	  waiting_for_child = 1;
+	  /* XXX - probably not strictly necessary but we want to catch
+	     everything that happened before we switch the behavior of
+	     trap_handler to longjmp on a trapped signal (waiting_for_child) */
+	  CHECK_WAIT_INTR;
+	  r = waitchld (pid, 1);	/* XXX */
+	  waiting_for_child = old_waiting;
+#if 0
+itrace("wait_for: blocking wait for %d returns %d child = %p", (int)pid, r, child);
+#endif
+	  queue_sigchld = 0;
+	  if (r == -1 && errno == ECHILD && this_shell_builtin == wait_builtin)
+	    {
+	      termination_state = -1;
+	      /* XXX - restore sigint handler here */
+	      restore_sigint_handler ();
+	      goto wait_for_return;
+	    }
+
+	  /* If child is marked as running, but waitpid() returns -1/ECHILD,
+	     there is something wrong.  Somewhere, wait should have returned
+	     that child's pid.  Mark the child as not running and the job,
+	     if it exists, as JDEAD. */
+	  if (r == -1 && errno == ECHILD)
+	    {
+	      if (child)
+		{
+		  child->running = PS_DONE;
+		  WSTATUS (child->status) = 0;	/* XXX -- can't find true status */
+		}
+	      js.c_living = 0;		/* no living child processes */
+	      if (job != NO_JOB)
+		{
+		  jobs[job]->state = JDEAD;
+		  js.c_reaped++;
+		  js.j_ndead++;
+		}
+	      if (pid == ANY_PID)
+		{
+		  termination_state = -1;
+		  break;
+		}
+	    }
+	}
+
+      /* If the shell is interactive, and job control is disabled, see
+	 if the foreground process has died due to SIGINT and jump out
+	 of the wait loop if it has.  waitchld has already restored the
+	 old SIGINT signal handler. */
+      if (interactive && job_control == 0)
+	QUIT;
+      /* Check for terminating signals and exit the shell if we receive one */
+      CHECK_TERMSIG;
+
+      /* Check for a trapped signal interrupting the wait builtin and jump out */
+      CHECK_WAIT_INTR;
+
+      if (pid == ANY_PID)
+	{
+	  /* XXX - could set child but we don't have a handle on what waitchld
+	    reaps.  Leave termination_state alone. */
+	  restore_sigint_handler ();
+	  goto wait_for_return;
+	}
+    }
+  while (PRUNNING (child) || (job != NO_JOB && RUNNING (job)));
+
+  /* Restore the original SIGINT signal handler before we return. */
+  restore_sigint_handler ();
+
+  /* The exit state of the command is either the termination state of the
+     child, or the termination state of the job.  If a job, the status
+     of the last child in the pipeline is the significant one.  If the command
+     or job was terminated by a signal, note that value also. */
+  termination_state = (job != NO_JOB) ? job_exit_status (job)
+				      : (child ? process_exit_status (child->status) : EXECUTION_SUCCESS);
+  last_command_exit_signal = (job != NO_JOB) ? job_exit_signal (job)
+					     : (child ? process_exit_signal (child->status) : 0);
+
+  /* XXX */
+  if ((job != NO_JOB && JOBSTATE (job) == JSTOPPED) || (child && WIFSTOPPED (child->status)))
+    termination_state = 128 + WSTOPSIG (child->status);
+
+  if (job == NO_JOB || IS_JOBCONTROL (job))
+    {
+      /* XXX - under what circumstances is a job not present in the jobs
+	 table (job == NO_JOB)?
+	 	1.  command substitution
+
+	 In the case of command substitution, at least, it's probably not
+	 the right thing to give the terminal to the shell's process group,
+	 even though there is code in subst.c:command_substitute to work
+	 around it.
+
+	 Things that don't:
+		$PROMPT_COMMAND execution
+		process substitution
+       */
+#if 0
+if (job == NO_JOB)
+  itrace("wait_for: job == NO_JOB, giving the terminal to shell_pgrp (%ld)", (long)shell_pgrp);
+#endif
+      /* Don't modify terminal pgrp if we are running in background or a
+	 subshell.  Make sure subst.c:command_substitute uses the same
+	 conditions to determine whether or not it should undo this and
+	 give the terminal to pipeline_pgrp. */
+      
+      if ((flags & JWAIT_NOTERM) == 0 && running_in_background == 0 &&
+	  (subshell_environment & (SUBSHELL_ASYNC|SUBSHELL_PIPE)) == 0)
+	give_terminal_to (shell_pgrp, 0);
+    }
+
+  /* If the command did not exit cleanly, or the job is just
+     being stopped, then reset the tty state back to what it
+     was before this command.  Reset the tty state and notify
+     the user of the job termination only if the shell is
+     interactive.  Clean up any dead jobs in either case. */
+  if (job != NO_JOB)
+    {
+      if (interactive_shell && subshell_environment == 0)
+	{
+	  /* This used to use `child->status'.  That's wrong, however, for
+	     pipelines.  `child' is the first process in the pipeline.  It's
+	     likely that the process we want to check for abnormal termination
+	     or stopping is the last process in the pipeline, especially if
+	     it's long-lived and the first process is short-lived.  Since we
+	     know we have a job here, we can check all the processes in this
+	     job's pipeline and see if one of them stopped or terminated due
+	     to a signal.  We might want to change this later to just check
+	     the last process in the pipeline.  If no process exits due to a
+	     signal, S is left as the status of the last job in the pipeline. */
+	  s = job_signal_status (job);
+
+	  if (WIFSIGNALED (s) || WIFSTOPPED (s))
+	    {
+	      set_tty_state ();
+
+	      /* If the current job was stopped or killed by a signal, and
+		 the user has requested it, get a possibly new window size */
+	      if (check_window_size && (job == js.j_current || IS_FOREGROUND (job)))
+		get_new_window_size (0, (int *)0, (int *)0);
+	    }
+	  else
+#if defined (READLINE)
+	    /* We don't want to do this if we are running a process during
+	       programmable completion. */
+	    if (RL_ISSTATE (RL_STATE_COMPLETING) == 0)
+#endif
+	    get_tty_state ();
+
+	  /* If job control is enabled, the job was started with job
+	     control, the job was the foreground job, and it was killed
+	     by SIGINT, then print a newline to compensate for the kernel
+	     printing the ^C without a trailing newline. */
+	  if (job_control && IS_JOBCONTROL (job) && IS_FOREGROUND (job) &&
+		WIFSIGNALED (s) && WTERMSIG (s) == SIGINT)
+	    {
+	      /* If SIGINT is not trapped and the shell is in a for, while,
+		 or until loop, act as if the shell received SIGINT as
+		 well, so the loop can be broken.  This doesn't call the
+		 SIGINT signal handler; maybe it should. */
+	      if (signal_is_trapped (SIGINT) == 0 && (loop_level || (shell_compatibility_level > 32 && executing_list)))
+		ADDINTERRUPT;
+	      /* Call any SIGINT trap handler if the shell is running a loop, so
+		 the loop can be broken.  This seems more useful and matches the
+		 behavior when the shell is running a builtin command in a loop
+		 when it is interrupted.  Change ADDINTERRUPT to
+		 trap_handler (SIGINT) to run the trap without interrupting the
+		 loop. */
+	      else if (signal_is_trapped (SIGINT) && loop_level)
+		ADDINTERRUPT;
+	      /* If an interactive shell with job control enabled is sourcing
+		 a file, allow the interrupt to terminate the file sourcing. */
+	      else if (interactive_shell && signal_is_trapped (SIGINT) == 0 && sourcelevel)
+		ADDINTERRUPT;
+	      else
+		{
+		  putchar ('\n');
+		  fflush (stdout);
+		}
+	    }
+	}
+      else if ((subshell_environment & (SUBSHELL_COMSUB|SUBSHELL_PIPE)) && wait_sigint_received)
+	{
+	  /* If waiting for a job in a subshell started to do command
+	     substitution or to run a pipeline element that consists of
+	     something like a while loop or a for loop, simulate getting
+	     and being killed by the SIGINT to pass the status back to our
+	     parent. */
+	  if (child_caught_sigint == 0 && signal_is_trapped (SIGINT) == 0)
+	    {
+	      UNBLOCK_CHILD (oset);
+	      old_sigint_handler = set_signal_handler (SIGINT, SIG_DFL);
+	      if (old_sigint_handler == SIG_IGN)
+		restore_sigint_handler ();
+	      else
+		kill (getpid (), SIGINT);
+	    }
+	}
+      else if (interactive_shell == 0 && subshell_environment == 0 && IS_FOREGROUND (job))
+	{
+	  s = job_signal_status (job);
+
+	  /* If we are non-interactive, but job control is enabled, and the job
+	     died due to SIGINT, pretend we got the SIGINT */
+	  if (job_control && IS_JOBCONTROL (job) && WIFSIGNALED (s) && WTERMSIG (s) == SIGINT)
+	    {
+	      ADDINTERRUPT;	/* For now */
+	    }
+
+	  if (check_window_size)
+	    get_new_window_size (0, (int *)0, (int *)0);
+	}
+
+      /* Moved here from set_job_status_and_cleanup, which is in the SIGCHLD
+	 signal handler path */
+      if (DEADJOB (job) && IS_FOREGROUND (job) /*&& subshell_environment == 0*/)
+	setjstatus (job);
+
+      /* If this job is dead, notify the user of the status.  If the shell
+	 is interactive, this will display a message on the terminal.  If
+	 the shell is not interactive, make sure we turn on the notify bit
+	 so we don't get an unwanted message about the job's termination,
+	 and so delete_job really clears the slot in the jobs table. */
+      notify_and_cleanup ();
+    }
+
+wait_for_return:
+
+  UNBLOCK_CHILD (oset);
+
+  return (termination_state);
+}
+
+/* Wait for the last process in the pipeline for JOB.  Returns whatever
+   wait_for returns: the last process's termination state or -1 if there
+   are no unwaited-for child processes or an error occurs.  If FLAGS
+   includes JWAIT_FORCE, we wait for the job to terminate, no just change
+   state */
+int
+wait_for_job (job, flags, ps)
+     int job, flags;
+     struct procstat *ps;
+{
+  pid_t pid;
+  int r, state;
+  sigset_t set, oset;
+
+  BLOCK_CHILD(set, oset);
+  state = JOBSTATE (job);
+  if (state == JSTOPPED)
+    internal_warning (_("wait_for_job: job %d is stopped"), job+1);
+
+  pid = find_last_pid (job, 0);
+  UNBLOCK_CHILD(oset);
+
+  do
+    {
+      r = wait_for (pid, 0);
+      if (r == -1 && errno == ECHILD)
+	mark_all_jobs_as_dead ();
+
+      CHECK_WAIT_INTR;
+
+      if ((flags & JWAIT_FORCE) == 0)
+	break;
+
+      BLOCK_CHILD (set, oset);
+      state = (job != NO_JOB && jobs[job]) ? JOBSTATE (job) : JDEAD;
+      UNBLOCK_CHILD (oset);
+    }
+  while (state != JDEAD);
+
+  /* POSIX.2: we can remove the job from the jobs table if we just waited
+     for it. */
+  BLOCK_CHILD (set, oset);
+  if (job != NO_JOB && jobs[job] && DEADJOB (job))
+    jobs[job]->flags |= J_NOTIFIED;
+  UNBLOCK_CHILD (oset);
+
+  if (ps)
+    {
+      ps->pid = pid;
+      ps->status = (r < 0) ? 127 : r;
+    }
+  return r;
+}
+
+/* Wait for any background job started by this shell to finish.  Very
+   similar to wait_for_background_pids().  Returns the exit status of
+   the next exiting job, -1 if there are no background jobs.  The caller
+   is responsible for translating -1 into the right return value. RPID,
+   if non-null, gets the pid of the job's process leader. */
+int
+wait_for_any_job (flags, ps)
+     int flags;
+     struct procstat *ps;
+{
+  pid_t pid;
+  int i, r;
+  sigset_t set, oset;
+
+  if (jobs_list_frozen)
+    return -1;
+
+  /* First see if there are any unnotified dead jobs that we can report on */
+  BLOCK_CHILD (set, oset);
+  for (i = 0; i < js.j_jobslots; i++)
+    {
+      if ((flags & JWAIT_WAITING) && jobs[i] && IS_WAITING (i) == 0)
+	continue;		/* if we don't want it, skip it */
+      if (jobs[i] && DEADJOB (i) && IS_NOTIFIED (i) == 0)
+	{
+return_job:
+	  r = job_exit_status (i);
+	  pid = find_last_pid (i, 0);
+	  if (ps)
+	    {
+	      ps->pid = pid;
+	      ps->status = r;
+	    }
+	  notify_of_job_status ();		/* XXX */
+	  delete_job (i, 0);
+#if defined (COPROCESS_SUPPORT)
+	  coproc_reap ();
+#endif
+	  UNBLOCK_CHILD (oset);
+	  return r;
+	}
+    }
+  UNBLOCK_CHILD (oset);
+
+  /* At this point, we have no dead jobs in the jobs table.  Wait until we
+     get one, even if it takes multiple pids exiting. */
+  for (;;)
+    {
+      /* Make sure there is a background job to wait for */
+      BLOCK_CHILD (set, oset);
+      for (i = 0; i < js.j_jobslots; i++)
+	if (jobs[i] && RUNNING (i) && IS_FOREGROUND (i) == 0)
+	  break;
+      if (i == js.j_jobslots)
+	{
+	  UNBLOCK_CHILD (oset);
+	  return -1;
+	}
+
+      UNBLOCK_CHILD (oset);
+
+      QUIT;
+      CHECK_TERMSIG;
+      CHECK_WAIT_INTR;
+
+      errno = 0;
+      r = wait_for (ANY_PID, 0);	/* special sentinel value for wait_for */
+      if (r == -1 && errno == ECHILD)
+	mark_all_jobs_as_dead ();
+	
+      /* Now we see if we have any dead jobs and return the first one */
+      BLOCK_CHILD (set, oset);
+      for (i = 0; i < js.j_jobslots; i++)
+	{
+	  if ((flags & JWAIT_WAITING) && jobs[i] && IS_WAITING (i) == 0)
+	    continue;		/* if we don't want it, skip it */
+	  if (jobs[i] && DEADJOB (i))
+	    goto return_job;
+	}
+      UNBLOCK_CHILD (oset);
+    }
+
+  return -1;
+}
+
+/* Print info about dead jobs, and then delete them from the list
+   of known jobs.  This does not actually delete jobs when the
+   shell is not interactive, because the dead jobs are not marked
+   as notified. */
+void
+notify_and_cleanup ()
+{
+  if (jobs_list_frozen)
+    return;
+
+  if (interactive || interactive_shell == 0 || sourcelevel)
+    notify_of_job_status ();
+
+  cleanup_dead_jobs ();
+}
+
+/* Make dead jobs disappear from the jobs array without notification.
+   This is used when the shell is not interactive. */
+void
+reap_dead_jobs ()
+{
+  mark_dead_jobs_as_notified (0);
+  cleanup_dead_jobs ();
+}
+
+/* Return the next closest (chronologically) job to JOB which is in
+   STATE.  STATE can be JSTOPPED, JRUNNING.  NO_JOB is returned if
+   there is no next recent job. */
+static int
+most_recent_job_in_state (job, state)
+     int job;
+     JOB_STATE state;
+{
+  register int i, result;
+  sigset_t set, oset;
+
+  BLOCK_CHILD (set, oset);
+
+  for (result = NO_JOB, i = job - 1; i >= 0; i--)
+    {
+      if (jobs[i] && (JOBSTATE (i) == state))
+	{
+	  result = i;
+	  break;
+	}
+    }
+
+  UNBLOCK_CHILD (oset);
+
+  return (result);
+}
+
+/* Return the newest *stopped* job older than JOB, or NO_JOB if not
+   found. */
+static int
+job_last_stopped (job)
+     int job;
+{
+  return (most_recent_job_in_state (job, JSTOPPED));
+}
+
+/* Return the newest *running* job older than JOB, or NO_JOB if not
+   found. */
+static int
+job_last_running (job)
+     int job;
+{
+  return (most_recent_job_in_state (job, JRUNNING));
+}
+
+/* Make JOB be the current job, and make previous be useful.  Must be
+   called with SIGCHLD blocked. */
+static void
+set_current_job (job)
+     int job;
+{
+  int candidate;
+
+  if (js.j_current != job)
+    {
+      js.j_previous = js.j_current;
+      js.j_current = job;
+    }
+
+  /* First choice for previous job is the old current job. */
+  if (js.j_previous != js.j_current &&
+      js.j_previous != NO_JOB &&
+      jobs[js.j_previous] &&
+      STOPPED (js.j_previous))
+    return;
+
+  /* Second choice:  Newest stopped job that is older than
+     the current job. */
+  candidate = NO_JOB;
+  if (STOPPED (js.j_current))
+    {
+      candidate = job_last_stopped (js.j_current);
+
+      if (candidate != NO_JOB)
+	{
+	  js.j_previous = candidate;
+	  return;
+	}
+    }
+
+  /* If we get here, there is either only one stopped job, in which case it is
+     the current job and the previous job should be set to the newest running
+     job, or there are only running jobs and the previous job should be set to
+     the newest running job older than the current job.  We decide on which
+     alternative to use based on whether or not JOBSTATE(js.j_current) is
+     JSTOPPED. */
+
+  candidate = RUNNING (js.j_current) ? job_last_running (js.j_current)
+				    : job_last_running (js.j_jobslots);
+
+  if (candidate != NO_JOB)
+    {
+      js.j_previous = candidate;
+      return;
+    }
+
+  /* There is only a single job, and it is both `+' and `-'. */
+  js.j_previous = js.j_current;
+}
+
+/* Make current_job be something useful, if it isn't already. */
+
+/* Here's the deal:  The newest non-running job should be `+', and the
+   next-newest non-running job should be `-'.  If there is only a single
+   stopped job, the js.j_previous is the newest non-running job.  If there
+   are only running jobs, the newest running job is `+' and the
+   next-newest running job is `-'.  Must be called with SIGCHLD blocked. */
+
+static void
+reset_current ()
+{
+  int candidate;
+
+  if (js.j_jobslots && js.j_current != NO_JOB && jobs[js.j_current] && STOPPED (js.j_current))
+    candidate = js.j_current;
+  else
+    {
+      candidate = NO_JOB;
+
+      /* First choice: the previous job. */
+      if (js.j_previous != NO_JOB && jobs[js.j_previous] && STOPPED (js.j_previous))
+	candidate = js.j_previous;
+
+      /* Second choice: the most recently stopped job. */
+      if (candidate == NO_JOB)
+	candidate = job_last_stopped (js.j_jobslots);
+
+      /* Third choice: the newest running job. */
+      if (candidate == NO_JOB)
+	candidate = job_last_running (js.j_jobslots);
+    }
+
+  /* If we found a job to use, then use it.  Otherwise, there
+     are no jobs period. */
+  if (candidate != NO_JOB)
+    set_current_job (candidate);
+  else
+    js.j_current = js.j_previous = NO_JOB;
+}
+
+/* Set up the job structures so we know the job and its processes are
+   all running. */
+static void
+set_job_running (job)
+     int job;
+{
+  register PROCESS *p;
+
+  /* Each member of the pipeline is now running. */
+  p = jobs[job]->pipe;
+
+  do
+    {
+      if (WIFSTOPPED (p->status))
+	p->running = PS_RUNNING;	/* XXX - could be PS_STOPPED */
+      p = p->next;
+    }
+  while (p != jobs[job]->pipe);
+
+  /* This means that the job is running. */
+  JOBSTATE (job) = JRUNNING;
+}
+
+/* Start a job.  FOREGROUND if non-zero says to do that.  Otherwise,
+   start the job in the background.  JOB is a zero-based index into
+   JOBS.  Returns -1 if it is unable to start a job, and the return
+   status of the job otherwise. */
+int
+start_job (job, foreground)
+     int job, foreground;
+{
+  register PROCESS *p;
+  int already_running;
+  sigset_t set, oset;
+  char *wd, *s;
+  static TTYSTRUCT save_stty;
+
+  BLOCK_CHILD (set, oset);
+
+  if ((subshell_environment & SUBSHELL_COMSUB) && (pipeline_pgrp == shell_pgrp))
+    {
+      internal_error (_("%s: no current jobs"), this_command_name);
+      UNBLOCK_CHILD (oset);
+      return (-1);
+    }
+
+  if (DEADJOB (job))
+    {
+      internal_error (_("%s: job has terminated"), this_command_name);
+      UNBLOCK_CHILD (oset);
+      return (-1);
+    }
+
+  already_running = RUNNING (job);
+
+  if (foreground == 0 && already_running)
+    {
+      internal_error (_("%s: job %d already in background"), this_command_name, job + 1);
+      UNBLOCK_CHILD (oset);
+      return (0);		/* XPG6/SUSv3 says this is not an error */
+    }
+
+  wd = current_working_directory ();
+
+  /* You don't know about the state of this job.  Do you? */
+  jobs[job]->flags &= ~J_NOTIFIED;
+
+  if (foreground)
+    {
+      set_current_job (job);
+      jobs[job]->flags |= J_FOREGROUND;
+    }
+
+  /* Tell the outside world what we're doing. */
+  p = jobs[job]->pipe;
+
+  if (foreground == 0)
+    {
+      /* POSIX.2 says `bg' doesn't give any indication about current or
+	 previous job. */
+      if (posixly_correct == 0)
+	s = (job == js.j_current) ? "+ ": ((job == js.j_previous) ? "- " : " ");       
+      else
+	s = " ";
+      printf ("[%d]%s", job + 1, s);
+    }
+
+  do
+    {
+      printf ("%s%s",
+	       p->command ? p->command : "",
+	       p->next != jobs[job]->pipe? " | " : "");
+      p = p->next;
+    }
+  while (p != jobs[job]->pipe);
+
+  if (foreground == 0)
+    printf (" &");
+
+  if (strcmp (wd, jobs[job]->wd) != 0)
+    printf ("	(wd: %s)", polite_directory_format (jobs[job]->wd));
+
+  printf ("\n");
+
+  /* Run the job. */
+  if (already_running == 0)
+    set_job_running (job);
+
+  /* Save the tty settings before we start the job in the foreground. */
+  if (foreground)
+    {
+      get_tty_state ();
+      save_stty = shell_tty_info;
+      /* Give the terminal to this job. */
+      if (IS_JOBCONTROL (job))
+	give_terminal_to (jobs[job]->pgrp, 0);
+    }
+  else
+    jobs[job]->flags &= ~J_FOREGROUND;
+
+  /* If the job is already running, then don't bother jump-starting it. */
+  if (already_running == 0)
+    {
+      jobs[job]->flags |= J_NOTIFIED;
+      killpg (jobs[job]->pgrp, SIGCONT);
+    }
+
+  if (foreground)
+    {
+      pid_t pid;
+      int st;
+
+      pid = find_last_pid (job, 0);
+      UNBLOCK_CHILD (oset);
+      st = wait_for (pid, 0);
+      shell_tty_info = save_stty;
+      set_tty_state ();
+      return (st);
+    }
+  else
+    {
+      reset_current ();
+      UNBLOCK_CHILD (oset);
+      return (0);
+    }
+}
+
+/* Give PID SIGNAL.  This determines what job the pid belongs to (if any).
+   If PID does belong to a job, and the job is stopped, then CONTinue the
+   job after giving it SIGNAL.  Returns -1 on failure.  If GROUP is non-null,
+   then kill the process group associated with PID. */
+int
+kill_pid (pid, sig, group)
+     pid_t pid;
+     int sig, group;
+{
+  register PROCESS *p;
+  int job, result, negative;
+  sigset_t set, oset;
+
+  if (pid < -1)
+    {
+      pid = -pid;
+      group = negative = 1;
+    }
+  else
+    negative = 0;
+
+  result = EXECUTION_SUCCESS;
+  if (group)
+    {
+      BLOCK_CHILD (set, oset);
+      p = find_pipeline (pid, 0, &job);
+
+      if (job != NO_JOB)
+	{
+	  jobs[job]->flags &= ~J_NOTIFIED;
+
+	  /* Kill process in backquotes or one started without job control? */
+
+	  /* If we're passed a pid < -1, just call killpg and see what happens  */
+	  if (negative && jobs[job]->pgrp == shell_pgrp)
+	    result = killpg (pid, sig);
+	  /* If we're killing using job control notification, for example,
+	     without job control active, we have to do things ourselves. */
+	  else if (jobs[job]->pgrp == shell_pgrp)
+	    {
+	      p = jobs[job]->pipe;
+	      do
+		{
+		  if (PALIVE (p) == 0)
+		    continue;		/* avoid pid recycling problem */
+		  kill (p->pid, sig);
+		  if (PEXITED (p) && (sig == SIGTERM || sig == SIGHUP))
+		    kill (p->pid, SIGCONT);
+		  p = p->next;
+		}
+	      while  (p != jobs[job]->pipe);
+	    }
+	  else
+	    {
+	      result = killpg (jobs[job]->pgrp, sig);
+	      if (p && STOPPED (job) && (sig == SIGTERM || sig == SIGHUP))
+		killpg (jobs[job]->pgrp, SIGCONT);
+	      /* If we're continuing a stopped job via kill rather than bg or
+		 fg, emulate the `bg' behavior. */
+	      if (p && STOPPED (job) && (sig == SIGCONT))
+		{
+		  set_job_running (job);
+		  jobs[job]->flags &= ~J_FOREGROUND;
+		  jobs[job]->flags |= J_NOTIFIED;
+		}
+	    }
+	}
+      else
+	result = killpg (pid, sig);
+
+      UNBLOCK_CHILD (oset);
+    }
+  else
+    result = kill (pid, sig);
+
+  return (result);
+}
+
+/* sigchld_handler () flushes at least one of the children that we are
+   waiting for.  It gets run when we have gotten a SIGCHLD signal. */
+static sighandler
+sigchld_handler (sig)
+     int sig;
+{
+  int n, oerrno;
+
+  oerrno = errno;
+  REINSTALL_SIGCHLD_HANDLER;
+  sigchld++;
+  n = 0;
+  if (queue_sigchld == 0)
+    n = waitchld (-1, 0);
+  errno = oerrno;
+  SIGRETURN (n);
+}
+
+/* waitchld() reaps dead or stopped children.  It's called by wait_for and
+   sigchld_handler, and runs until there aren't any children terminating any
+   more.
+   If BLOCK is 1, this is to be a blocking wait for a single child, although
+   an arriving SIGCHLD could cause the wait to be non-blocking.  It returns
+   the number of children reaped, or -1 if there are no unwaited-for child
+   processes. */
+static int
+waitchld (wpid, block)
+     pid_t wpid;
+     int block;
+{
+  WAIT status;
+  PROCESS *child;
+  pid_t pid;
+  int ind;
+
+  int call_set_current, last_stopped_job, job, children_exited, waitpid_flags;
+  static int wcontinued = WCONTINUED;	/* run-time fix for glibc problem */
+
+  call_set_current = children_exited = 0;
+  last_stopped_job = NO_JOB;
+
+  do
+    {
+      /* We don't want to be notified about jobs stopping if job control
+	 is not active.  XXX - was interactive_shell instead of job_control */
+      waitpid_flags = (job_control && subshell_environment == 0)
+			? (WUNTRACED|wcontinued)
+			: 0;
+      if (sigchld || block == 0)
+	waitpid_flags |= WNOHANG;
+
+      /* Check for terminating signals and exit the shell if we receive one */
+      CHECK_TERMSIG;
+      /* Check for a trapped signal interrupting the wait builtin and jump out */
+      CHECK_WAIT_INTR;
+
+      if (block == 1 && queue_sigchld == 0 && (waitpid_flags & WNOHANG) == 0)
+	{
+	  internal_warning (_("waitchld: turning on WNOHANG to avoid indefinite block"));
+	  waitpid_flags |= WNOHANG;
+	}
+
+      pid = WAITPID (-1, &status, waitpid_flags);
+
+#if 0
+if (wpid != -1 && block)
+  itrace("waitchld: blocking waitpid returns %d", pid);
+#endif
+#if 0
+if (wpid != -1)
+  itrace("waitchld: %s waitpid returns %d", block?"blocking":"non-blocking", pid);
+#endif
+      /* WCONTINUED may be rejected by waitpid as invalid even when defined */
+      if (wcontinued && pid < 0 && errno == EINVAL)
+	{
+	  wcontinued = 0;
+	  continue;	/* jump back to the test and retry without WCONTINUED */
+	}
+
+      /* The check for WNOHANG is to make sure we decrement sigchld only
+	 if it was non-zero before we called waitpid. */
+      if (sigchld > 0 && (waitpid_flags & WNOHANG))
+	sigchld--;
+
+      /* If waitpid returns -1 with errno == ECHILD, there are no more
+	 unwaited-for child processes of this shell. */
+      if (pid < 0 && errno == ECHILD)
+	{
+	  if (children_exited == 0)
+	    return -1;
+	  else
+	    break;
+	}
+
+#if 0
+itrace("waitchld: waitpid returns %d block = %d children_exited = %d", pid, block, children_exited);
+#endif
+      /* If waitpid returns 0, there are running children.  If it returns -1,
+	 the only other error POSIX says it can return is EINTR. */
+      CHECK_TERMSIG;
+      CHECK_WAIT_INTR;
+
+      /* If waitpid returns -1/EINTR and the shell saw a SIGINT, then we
+	 assume the child has blocked or handled SIGINT.  In that case, we
+	 require the child to actually die due to SIGINT to act on the
+	 SIGINT we received; otherwise we assume the child handled it and
+	 let it go. */
+      if (pid < 0 && errno == EINTR && wait_sigint_received)
+	child_caught_sigint = 1;
+
+      if (pid <= 0)
+	continue;	/* jumps right to the test */
+
+      /* Linux kernels appear to signal the parent but not interrupt the
+	 waitpid() (or restart it even without SA_RESTART) on SIGINT, so if
+	 we saw a SIGINT and the process exited or died due to some other
+	 signal, assume the child caught the SIGINT. */
+      if (wait_sigint_received && (WIFSIGNALED (status) == 0 || WTERMSIG (status) != SIGINT))
+	child_caught_sigint = 1;
+
+      /* If the child process did die due to SIGINT, forget our assumption
+	 that it caught or otherwise handled it. */
+      if (WIFSIGNALED (status) && WTERMSIG (status) == SIGINT)
+	child_caught_sigint = 0;
+
+      /* children_exited is used to run traps on SIGCHLD.  We don't want to
+	 run the trap if a process is just being continued. */
+      if (WIFCONTINUED(status) == 0)
+	{
+	  children_exited++;
+	  js.c_living--;
+	}
+
+      /* Locate our PROCESS for this pid. */
+      child = find_process (pid, 1, &job);	/* want living procs only */
+
+#if defined (COPROCESS_SUPPORT)
+      coproc_pidchk (pid, WSTATUS(status));
+#endif
+
+#if defined (PROCESS_SUBSTITUTION)
+      /* Only manipulate the list of process substitutions while SIGCHLD
+	 is blocked. We only use this as a hint that we can remove FIFOs
+	 or close file descriptors corresponding to terminated process
+	 substitutions. */
+      if ((ind = find_procsub_child (pid)) >= 0)
+	set_procsub_status (ind, pid, WSTATUS (status));
+#endif
+
+      /* It is not an error to have a child terminate that we did
+	 not have a record of.  This child could have been part of
+	 a pipeline in backquote substitution.  Even so, I'm not
+	 sure child is ever non-zero. */
+      if (child == 0)
+	{
+	  if (WIFEXITED (status) || WIFSIGNALED (status))
+	    js.c_reaped++;
+	  continue;
+	}
+
+      /* Remember status, and whether or not the process is running. */
+      child->status = status;
+      child->running = WIFCONTINUED(status) ? PS_RUNNING : PS_DONE;
+
+      if (PEXITED (child))
+	{
+	  js.c_totreaped++;
+	  if (job != NO_JOB)
+	    js.c_reaped++;
+	}
+
+      if (job == NO_JOB)
+	continue;
+
+      call_set_current += set_job_status_and_cleanup (job);
+
+      if (STOPPED (job))
+	last_stopped_job = job;
+      else if (DEADJOB (job) && last_stopped_job == job)
+	last_stopped_job = NO_JOB;
+    }
+  while ((sigchld || block == 0) && pid > (pid_t)0);
+
+  /* If a job was running and became stopped, then set the current
+     job.  Otherwise, don't change a thing. */
+  if (call_set_current)
+    {
+      if (last_stopped_job != NO_JOB)
+	set_current_job (last_stopped_job);
+      else
+	reset_current ();
+    }
+
+  /* Call a SIGCHLD trap handler for each child that exits, if one is set. */
+  if (children_exited &&
+      (signal_is_trapped (SIGCHLD) || trap_list[SIGCHLD] == (char *)IMPOSSIBLE_TRAP_HANDLER) &&
+      trap_list[SIGCHLD] != (char *)IGNORE_SIG)
+    {
+      if (posixly_correct && this_shell_builtin && this_shell_builtin == wait_builtin)
+	{
+	  /* This was trap_handler (SIGCHLD) but that can lose traps if
+	     children_exited > 1 */
+	  queue_sigchld_trap (children_exited);
+	  wait_signal_received = SIGCHLD;
+	  /* If we're in a signal handler, let CHECK_WAIT_INTR pick it up;
+	     run_pending_traps will call run_sigchld_trap later  */
+	  if (sigchld == 0 && wait_intr_flag)
+	    sh_longjmp (wait_intr_buf, 1);
+	}
+      /* If not in posix mode and not executing the wait builtin, queue the
+	 signal for later handling.  Run the trap immediately if we are
+	 executing the wait builtin, but don't break out of `wait'. */
+      else if (sigchld)	/* called from signal handler */
+	queue_sigchld_trap (children_exited);
+      else if (signal_in_progress (SIGCHLD))
+	queue_sigchld_trap (children_exited);     
+      else if (trap_list[SIGCHLD] == (char *)IMPOSSIBLE_TRAP_HANDLER)
+	queue_sigchld_trap (children_exited);
+      else if (running_trap)
+	queue_sigchld_trap (children_exited);
+      else if (this_shell_builtin == wait_builtin)
+	run_sigchld_trap (children_exited);	/* XXX */
+      else
+	queue_sigchld_trap (children_exited);
+    }
+
+  /* We have successfully recorded the useful information about this process
+     that has just changed state.  If we notify asynchronously, and the job
+     that this process belongs to is no longer running, then notify the user
+     of that fact now. */
+  if (asynchronous_notification && interactive && executing_builtin == 0)
+    notify_of_job_status ();
+
+  return (children_exited);
+}
+
+/* Set the status of JOB and perform any necessary cleanup if the job is
+   marked as JDEAD.
+
+   Currently, the cleanup activity is restricted to handling any SIGINT
+   received while waiting for a foreground job to finish. */
+static int
+set_job_status_and_cleanup (job)
+     int job;
+{
+  PROCESS *child;
+  int tstatus, job_state, any_stopped, any_tstped, call_set_current;
+  SigHandler *temp_handler;
+
+  child = jobs[job]->pipe;
+  jobs[job]->flags &= ~J_NOTIFIED;
+
+  call_set_current = 0;
+
+  /*
+   * COMPUTE JOB STATUS
+   */
+
+  /* If all children are not running, but any of them is  stopped, then
+     the job is stopped, not dead. */
+  job_state = any_stopped = any_tstped = 0;
+  do
+    {
+      job_state |= PRUNNING (child);
+#if 0
+      if (PEXITED (child) && (WIFSTOPPED (child->status)))
+#else
+      /* Only checking for WIFSTOPPED now, not for PS_DONE */
+      if (PSTOPPED (child))
+#endif
+	{
+	  any_stopped = 1;
+	  any_tstped |= job_control && (WSTOPSIG (child->status) == SIGTSTP);
+	}
+      child = child->next;
+    }
+  while (child != jobs[job]->pipe);
+
+  /* If job_state != 0, the job is still running, so don't bother with
+     setting the process exit status and job state unless we're
+     transitioning from stopped to running. */
+  if (job_state != 0 && JOBSTATE(job) != JSTOPPED)
+    return 0;
+
+  /*
+   * SET JOB STATUS
+   */
+
+  /* The job is either stopped or dead.  Set the state of the job accordingly. */
+  if (any_stopped)
+    {
+      jobs[job]->state = JSTOPPED;
+      jobs[job]->flags &= ~J_FOREGROUND;
+      call_set_current++;
+      /* Suspending a job with SIGTSTP breaks all active loops. */
+      if (any_tstped && loop_level)
+	breaking = loop_level;
+    }
+  else if (job_state != 0)	/* was stopped, now running */
+    {
+      jobs[job]->state = JRUNNING;
+      call_set_current++;
+    }
+  else
+    {
+      jobs[job]->state = JDEAD;
+      js.j_ndead++;
+
+#if 0
+      if (IS_FOREGROUND (job))
+	setjstatus (job);
+#endif
+
+      /* If this job has a cleanup function associated with it, call it
+	 with `cleanarg' as the single argument, then set the function
+	 pointer to NULL so it is not inadvertently called twice.  The
+	 cleanup function is responsible for deallocating cleanarg. */
+      if (jobs[job]->j_cleanup)
+	{
+	  (*jobs[job]->j_cleanup) (jobs[job]->cleanarg);
+	  jobs[job]->j_cleanup = (sh_vptrfunc_t *)NULL;
+	}
+    }
+
+  /*
+   * CLEANUP
+   *
+   * Currently, we just do special things if we got a SIGINT while waiting
+   * for a foreground job to complete
+   */
+
+  if (JOBSTATE (job) == JDEAD)
+    {
+      /* If we're running a shell script and we get a SIGINT with a
+	 SIGINT trap handler, but the foreground job handles it and
+	 does not exit due to SIGINT, run the trap handler but do not
+	 otherwise act as if we got the interrupt. */
+      if (wait_sigint_received && interactive_shell == 0 &&
+	  child_caught_sigint && IS_FOREGROUND (job) &&
+	  signal_is_trapped (SIGINT))
+	{
+	  int old_frozen;
+	  wait_sigint_received = 0;
+	  last_command_exit_value = process_exit_status (child->status);
+
+	  old_frozen = jobs_list_frozen;
+	  jobs_list_frozen = 1;
+	  tstatus = maybe_call_trap_handler (SIGINT);
+	  jobs_list_frozen = old_frozen;
+	}
+
+      /* If the foreground job is killed by SIGINT when job control is not
+	 active, we need to perform some special handling.
+
+	 The check of wait_sigint_received is a way to determine if the
+	 SIGINT came from the keyboard (in which case the shell has already
+	 seen it, and wait_sigint_received is non-zero, because keyboard
+	 signals are sent to process groups) or via kill(2) to the foreground
+	 process by another process (or itself).  If the shell did receive the
+	 SIGINT, it needs to perform normal SIGINT processing.  XXX - should
+	 this change its behavior depending on whether the last command in an
+	 pipeline exited due to SIGINT, or any process in the pipeline?  Right
+	 now it does this if any process in the pipeline exits due to SIGINT. */
+      else if (wait_sigint_received &&
+	      child_caught_sigint == 0 &&
+	      IS_FOREGROUND (job) && IS_JOBCONTROL (job) == 0)
+	{
+	  int old_frozen;
+
+	  wait_sigint_received = 0;
+
+	  /* If SIGINT is trapped, set the exit status so that the trap
+	     handler can see it. */
+	  if (signal_is_trapped (SIGINT))
+	    last_command_exit_value = process_exit_status (child->status);
+
+	  /* If the signal is trapped, let the trap handler get it no matter
+	     what and simply return if the trap handler returns.
+	     maybe_call_trap_handler() may cause dead jobs to be removed from
+	     the job table because of a call to execute_command.  We work
+	     around this by setting JOBS_LIST_FROZEN. */
+	  old_frozen = jobs_list_frozen;
+	  jobs_list_frozen = 1;
+	  tstatus = maybe_call_trap_handler (SIGINT);
+	  jobs_list_frozen = old_frozen;
+	  if (tstatus == 0 && old_sigint_handler != INVALID_SIGNAL_HANDLER)
+	    {
+	      /* wait_sigint_handler () has already seen SIGINT and
+		 allowed the wait builtin to jump out.  We need to
+		 call the original SIGINT handler, if necessary.  If
+		 the original handler is SIG_DFL, we need to resend
+		 the signal to ourselves. */
+
+	      temp_handler = old_sigint_handler;
+
+	      /* Bogus.  If we've reset the signal handler as the result
+		 of a trap caught on SIGINT, then old_sigint_handler
+		 will point to trap_handler, which now knows nothing about
+		 SIGINT (if we reset the sighandler to the default).
+		 In this case, we have to fix things up.  What a crock. */
+	      if (temp_handler == trap_handler && signal_is_trapped (SIGINT) == 0)
+		  temp_handler = trap_to_sighandler (SIGINT);
+	      restore_sigint_handler ();
+	      if (temp_handler == SIG_DFL)
+		termsig_handler (SIGINT);	/* XXX */
+	      else if (temp_handler != SIG_IGN)
+		(*temp_handler) (SIGINT);
+	    }
+	}
+    }
+
+  return call_set_current;
+}
+
+/* Build the array of values for the $PIPESTATUS variable from the set of
+   exit statuses of all processes in the job J. */
+static void
+setjstatus (j)
+     int j;
+{
+#if defined (ARRAY_VARS)
+  register int i;
+  register PROCESS *p;
+
+  for (i = 1, p = jobs[j]->pipe; p->next != jobs[j]->pipe; p = p->next, i++)
+    ;
+  i++;
+  if (statsize < i)
+    {
+      pstatuses = (int *)xrealloc (pstatuses, i * sizeof (int));
+      statsize = i;
+    }
+  i = 0;
+  p = jobs[j]->pipe;
+  do
+    {
+      pstatuses[i++] = process_exit_status (p->status);
+      p = p->next;
+    }
+  while (p != jobs[j]->pipe);
+
+  pstatuses[i] = -1;	/* sentinel */
+  set_pipestatus_array (pstatuses, i);
+#endif
+}
+
+void
+run_sigchld_trap (nchild)
+     int nchild;
+{
+  char *trap_command;
+  int i;
+
+  /* Turn off the trap list during the call to parse_and_execute ()
+     to avoid potentially infinite recursive calls.  Preserve the
+     values of last_command_exit_value, last_made_pid, and the_pipeline
+     around the execution of the trap commands. */
+  trap_command = savestring (trap_list[SIGCHLD]);
+
+  begin_unwind_frame ("SIGCHLD trap");
+  unwind_protect_int (last_command_exit_value);
+  unwind_protect_int (last_command_exit_signal);
+  unwind_protect_var (last_made_pid);
+  unwind_protect_int (jobs_list_frozen);
+  unwind_protect_pointer (the_pipeline);
+  unwind_protect_pointer (subst_assign_varlist);
+  unwind_protect_pointer (this_shell_builtin);
+  unwind_protect_pointer (temporary_env);
+
+  /* We have to add the commands this way because they will be run
+     in reverse order of adding.  We don't want maybe_set_sigchld_trap ()
+     to reference freed memory. */
+  add_unwind_protect (xfree, trap_command);
+  add_unwind_protect (maybe_set_sigchld_trap, trap_command);
+
+  subst_assign_varlist = (WORD_LIST *)NULL;
+  the_pipeline = (PROCESS *)NULL;
+  temporary_env = 0;	/* traps should not run with temporary env */
+
+  running_trap = SIGCHLD + 1;
+
+  set_impossible_sigchld_trap ();
+  jobs_list_frozen = 1;
+  for (i = 0; i < nchild; i++)
+    {
+      parse_and_execute (savestring (trap_command), "trap", SEVAL_NOHIST|SEVAL_RESETLINE);
+    }
+
+  run_unwind_frame ("SIGCHLD trap");
+  running_trap = 0;
+}
+
+/* Function to call when you want to notify people of changes
+   in job status.  This prints out all jobs which are pending
+   notification to stderr, and marks those printed as already
+   notified, thus making them candidates for cleanup. */
+static void
+notify_of_job_status ()
+{
+  register int job, termsig;
+  char *dir;
+  sigset_t set, oset;
+  WAIT s;
+
+  if (jobs == 0 || js.j_jobslots == 0)
+    return;
+
+  if (old_ttou != 0)
+    {
+      sigemptyset (&set);
+      sigaddset (&set, SIGCHLD);
+      sigaddset (&set, SIGTTOU);
+      sigemptyset (&oset);
+      sigprocmask (SIG_BLOCK, &set, &oset);
+    }
+  else
+    queue_sigchld++;
+
+  /* XXX could use js.j_firstj here */
+  for (job = 0, dir = (char *)NULL; job < js.j_jobslots; job++)
+    {
+      if (jobs[job] && IS_NOTIFIED (job) == 0)
+	{
+	  s = raw_job_exit_status (job);
+	  termsig = WTERMSIG (s);
+
+	  /* POSIX.2 says we have to hang onto the statuses of at most the
+	     last CHILD_MAX background processes if the shell is running a
+	     script.  If the shell is running a script, either from a file
+	     or standard input, don't print anything unless the job was
+	     killed by a signal. */
+	  if (startup_state == 0 && WIFSIGNALED (s) == 0 &&
+		((DEADJOB (job) && IS_FOREGROUND (job) == 0) || STOPPED (job)))
+	    continue;
+	  
+	  /* If job control is disabled, don't print the status messages.
+	     Mark dead jobs as notified so that they get cleaned up.  If
+	     startup_state == 2 and subshell_environment has the
+	     SUBSHELL_COMSUB bit turned on, we were started to run a command
+	     substitution, so don't print anything.
+	     Otherwise, if the shell is not interactive, POSIX says that `jobs'
+	     is the only way to notify of job status. */
+	  if ((job_control == 0 && interactive_shell) ||
+	      (startup_state == 2 && (subshell_environment & SUBSHELL_COMSUB)) ||
+	      (startup_state == 2 && posixly_correct && (subshell_environment & SUBSHELL_COMSUB) == 0))
+	    {
+	      /* POSIX.2 compatibility:  if the shell is not interactive,
+		 hang onto the job corresponding to the last asynchronous
+		 pid until the user has been notified of its status or does
+		 a `wait'. */
+	      if (DEADJOB (job) && (interactive_shell || (find_last_pid (job, 0) != last_asynchronous_pid)))
+		jobs[job]->flags |= J_NOTIFIED;
+	      continue;
+	    }
+
+	  /* Print info on jobs that are running in the background,
+	     and on foreground jobs that were killed by anything
+	     except SIGINT (and possibly SIGPIPE). */
+	  switch (JOBSTATE (job))
+	    {
+	    case JDEAD:
+	      if (interactive_shell == 0 && termsig && WIFSIGNALED (s) &&
+		  termsig != SIGINT &&
+#if defined (DONT_REPORT_SIGTERM)
+		  termsig != SIGTERM &&
+#endif
+#if defined (DONT_REPORT_SIGPIPE)
+		  termsig != SIGPIPE &&
+#endif
+		  signal_is_trapped (termsig) == 0)
+		{
+		  /* Don't print `0' for a line number. */
+		  fprintf (stderr, _("%s: line %d: "), get_name_for_error (), (line_number == 0) ? 1 : line_number);
+		  pretty_print_job (job, JLIST_NONINTERACTIVE, stderr);
+		}
+	      else if (IS_FOREGROUND (job))
+		{
+#if !defined (DONT_REPORT_SIGPIPE)
+		  if (termsig && WIFSIGNALED (s) && termsig != SIGINT)
+#else
+		  if (termsig && WIFSIGNALED (s) && termsig != SIGINT && termsig != SIGPIPE)
+#endif
+		    {
+		      fprintf (stderr, "%s", j_strsignal (termsig));
+
+		      if (WIFCORED (s))
+			fprintf (stderr, _(" (core dumped)"));
+
+		      fprintf (stderr, "\n");
+		    }
+		}
+	      else if (job_control)	/* XXX job control test added */
+		{
+		  if (dir == 0)
+		    dir = current_working_directory ();
+		  pretty_print_job (job, JLIST_STANDARD, stderr);
+		  if (dir && strcmp (dir, jobs[job]->wd) != 0)
+		    fprintf (stderr,
+			     _("(wd now: %s)\n"), polite_directory_format (dir));
+		}
+
+	      jobs[job]->flags |= J_NOTIFIED;
+	      break;
+
+	    case JSTOPPED:
+	      fprintf (stderr, "\n");
+	      if (dir == 0)
+		dir = current_working_directory ();
+	      pretty_print_job (job, JLIST_STANDARD, stderr);
+	      if (dir && (strcmp (dir, jobs[job]->wd) != 0))
+		fprintf (stderr,
+			 _("(wd now: %s)\n"), polite_directory_format (dir));
+	      jobs[job]->flags |= J_NOTIFIED;
+	      break;
+
+	    case JRUNNING:
+	    case JMIXED:
+	      break;
+
+	    default:
+	      programming_error ("notify_of_job_status");
+	    }
+	}
+    }
+  if (old_ttou != 0)
+    sigprocmask (SIG_SETMASK, &oset, (sigset_t *)NULL);
+  else
+    queue_sigchld--;
+}
+
+/* Initialize the job control mechanism, and set up the tty stuff. */
+int
+initialize_job_control (force)
+     int force;
+{
+  pid_t t;
+  int t_errno, tty_sigs;
+
+  t_errno = -1;
+  shell_pgrp = getpgid (0);
+
+  if (shell_pgrp == -1)
+    {
+      sys_error (_("initialize_job_control: getpgrp failed"));
+      exit (1);
+    }
+
+  /* We can only have job control if we are interactive unless we force it. */
+  if (interactive == 0 && force == 0)
+    {
+      job_control = 0;
+      original_pgrp = NO_PID;
+      shell_tty = fileno (stderr);
+      terminal_pgrp = tcgetpgrp (shell_tty);	/* for checking later */
+    }
+  else
+    {
+      shell_tty = -1;
+
+      /* If forced_interactive is set, we skip the normal check that stderr
+	 is attached to a tty, so we need to check here.  If it's not, we
+	 need to see whether we have a controlling tty by opening /dev/tty,
+	 since trying to use job control tty pgrp manipulations on a non-tty
+	 is going to fail. */
+      if (forced_interactive && isatty (fileno (stderr)) == 0)
+	shell_tty = open ("/dev/tty", O_RDWR|O_NONBLOCK);
+
+      /* Get our controlling terminal.  If job_control is set, or
+	 interactive is set, then this is an interactive shell no
+	 matter where fd 2 is directed. */
+      if (shell_tty == -1)
+	shell_tty = dup (fileno (stderr));	/* fd 2 */
+
+      if (shell_tty != -1)
+	shell_tty = move_to_high_fd (shell_tty, 1, -1);
+
+      /* Compensate for a bug in systems that compiled the BSD
+	 rlogind with DEBUG defined, like NeXT and Alliant. */
+      if (shell_pgrp == 0)
+	{
+	  shell_pgrp = getpid ();
+	  setpgid (0, shell_pgrp);
+	  if (shell_tty != -1)
+	    tcsetpgrp (shell_tty, shell_pgrp);
+	}
+
+      tty_sigs = 0;
+      while ((terminal_pgrp = tcgetpgrp (shell_tty)) != -1)
+	{
+	  if (shell_pgrp != terminal_pgrp)
+	    {
+	      SigHandler *ottin;
+
+	      CHECK_TERMSIG;
+	      ottin = set_signal_handler (SIGTTIN, SIG_DFL);
+	      kill (0, SIGTTIN);
+	      set_signal_handler (SIGTTIN, ottin);
+	      if (tty_sigs++ > 16)
+		{
+		  sys_error (_("initialize_job_control: no job control in background"));
+		  job_control = 0;
+		  original_pgrp = terminal_pgrp;	/* for eventual give_terminal_to */
+		  goto just_bail;
+		}
+	      continue;
+	    }
+	  break;
+	}
+
+      if (terminal_pgrp == -1)
+	t_errno = errno;
+
+      /* Make sure that we are using the new line discipline. */
+      if (set_new_line_discipline (shell_tty) < 0)
+	{
+	  sys_error (_("initialize_job_control: line discipline"));
+	  job_control = 0;
+	}
+      else
+	{
+	  original_pgrp = shell_pgrp;
+	  shell_pgrp = getpid ();
+
+	  if ((original_pgrp != shell_pgrp) && (setpgid (0, shell_pgrp) < 0))
+	    {
+	      sys_error (_("initialize_job_control: setpgid"));
+	      shell_pgrp = original_pgrp;
+	    }
+
+	  job_control = 1;
+
+	  /* If (and only if) we just set our process group to our pid,
+	     thereby becoming a process group leader, and the terminal
+	     is not in the same process group as our (new) process group,
+	     then set the terminal's process group to our (new) process
+	     group.  If that fails, set our process group back to what it
+	     was originally (so we can still read from the terminal) and
+	     turn off job control.  */
+	  if (shell_pgrp != original_pgrp && shell_pgrp != terminal_pgrp)
+	    {
+	      if (give_terminal_to (shell_pgrp, 0) < 0)
+		{
+		  t_errno = errno;
+		  setpgid (0, original_pgrp);
+		  shell_pgrp = original_pgrp;
+		  errno = t_errno;
+		  sys_error (_("cannot set terminal process group (%d)"), shell_pgrp);
+		  job_control = 0;
+		}
+	    }
+
+	  if (job_control && ((t = tcgetpgrp (shell_tty)) == -1 || t != shell_pgrp))
+	    {
+	      if (t_errno != -1)
+		errno = t_errno;
+	      sys_error (_("cannot set terminal process group (%d)"), t);
+	      job_control = 0;
+	    }
+	}
+      if (job_control == 0)
+	internal_error (_("no job control in this shell"));
+    }
+
+just_bail:
+  running_in_background = terminal_pgrp != shell_pgrp;
+
+  if (shell_tty != fileno (stderr))
+    SET_CLOSE_ON_EXEC (shell_tty);
+
+  set_signal_handler (SIGCHLD, sigchld_handler);
+
+  change_flag ('m', job_control ? '-' : '+');
+
+  if (interactive)
+    get_tty_state ();
+
+  set_maxchild (0);
+
+  return job_control;
+}
+
+#ifdef DEBUG
+void
+debug_print_pgrps ()
+{
+  itrace("original_pgrp = %ld shell_pgrp = %ld terminal_pgrp = %ld",
+	 (long)original_pgrp, (long)shell_pgrp, (long)terminal_pgrp);
+  itrace("tcgetpgrp(%d) -> %ld, getpgid(0) -> %ld",
+	 shell_tty, (long)tcgetpgrp (shell_tty), (long)getpgid(0));
+}
+#endif
+
+/* Set the line discipline to the best this system has to offer.
+   Return -1 if this is not possible. */
+static int
+set_new_line_discipline (tty)
+     int tty;
+{
+#if defined (NEW_TTY_DRIVER)
+  int ldisc;
+
+  if (ioctl (tty, TIOCGETD, &ldisc) < 0)
+    return (-1);
+
+  if (ldisc != NTTYDISC)
+    {
+      ldisc = NTTYDISC;
+
+      if (ioctl (tty, TIOCSETD, &ldisc) < 0)
+	return (-1);
+    }
+  return (0);
+#endif /* NEW_TTY_DRIVER */
+
+#if defined (TERMIO_TTY_DRIVER)
+#  if defined (TERMIO_LDISC) && (NTTYDISC)
+  if (ioctl (tty, TCGETA, &shell_tty_info) < 0)
+    return (-1);
+
+  if (shell_tty_info.c_line != NTTYDISC)
+    {
+      shell_tty_info.c_line = NTTYDISC;
+      if (ioctl (tty, TCSETAW, &shell_tty_info) < 0)
+	return (-1);
+    }
+#  endif /* TERMIO_LDISC && NTTYDISC */
+  return (0);
+#endif /* TERMIO_TTY_DRIVER */
+
+#if defined (TERMIOS_TTY_DRIVER)
+#  if defined (TERMIOS_LDISC) && defined (NTTYDISC)
+  if (tcgetattr (tty, &shell_tty_info) < 0)
+    return (-1);
+
+  if (shell_tty_info.c_line != NTTYDISC)
+    {
+      shell_tty_info.c_line = NTTYDISC;
+      if (tcsetattr (tty, TCSADRAIN, &shell_tty_info) < 0)
+	return (-1);
+    }
+#  endif /* TERMIOS_LDISC && NTTYDISC */
+  return (0);
+#endif /* TERMIOS_TTY_DRIVER */
+
+#if !defined (NEW_TTY_DRIVER) && !defined (TERMIO_TTY_DRIVER) && !defined (TERMIOS_TTY_DRIVER)
+  return (-1);
+#endif
+}
+
+/* Setup this shell to handle C-C, etc. */
+void
+initialize_job_signals ()
+{
+  if (interactive)
+    {
+      set_signal_handler (SIGINT, sigint_sighandler);
+      set_signal_handler (SIGTSTP, SIG_IGN);
+      set_signal_handler (SIGTTOU, SIG_IGN);
+      set_signal_handler (SIGTTIN, SIG_IGN);
+    }
+  else if (job_control)
+    {
+      old_tstp = set_signal_handler (SIGTSTP, sigstop_sighandler);
+      old_ttin = set_signal_handler (SIGTTIN, sigstop_sighandler);
+      old_ttou = set_signal_handler (SIGTTOU, sigstop_sighandler);
+    }
+  /* Leave disposition unmodified for non-interactive shells without job
+     control. */
+}
+
+/* Here we handle CONT signals. */
+static sighandler
+sigcont_sighandler (sig)
+     int sig;
+{
+  initialize_job_signals ();
+  set_signal_handler (SIGCONT, old_cont);
+  kill (getpid (), SIGCONT);
+
+  SIGRETURN (0);
+}
+
+/* Here we handle stop signals while we are running not as a login shell. */
+static sighandler
+sigstop_sighandler (sig)
+     int sig;
+{
+  set_signal_handler (SIGTSTP, old_tstp);
+  set_signal_handler (SIGTTOU, old_ttou);
+  set_signal_handler (SIGTTIN, old_ttin);
+
+  old_cont = set_signal_handler (SIGCONT, sigcont_sighandler);
+
+  give_terminal_to (shell_pgrp, 0);
+
+  kill (getpid (), sig);
+
+  SIGRETURN (0);
+}
+
+/* Give the terminal to PGRP.  */
+int
+give_terminal_to (pgrp, force)
+     pid_t pgrp;
+     int force;
+{
+  sigset_t set, oset;
+  int r, e;
+
+  r = 0;
+  if (job_control || force)
+    {
+      sigemptyset (&set);
+      sigaddset (&set, SIGTTOU);
+      sigaddset (&set, SIGTTIN);
+      sigaddset (&set, SIGTSTP);
+      sigaddset (&set, SIGCHLD);
+      sigemptyset (&oset);
+      sigprocmask (SIG_BLOCK, &set, &oset);
+
+      if (tcsetpgrp (shell_tty, pgrp) < 0)
+	{
+	  /* Maybe we should print an error message? */
+#if 0
+	  sys_error ("tcsetpgrp(%d) failed: pid %ld to pgrp %ld",
+	    shell_tty, (long)getpid(), (long)pgrp);
+#endif
+	  r = -1;
+	  e = errno;
+	}
+      else
+	terminal_pgrp = pgrp;
+      sigprocmask (SIG_SETMASK, &oset, (sigset_t *)NULL);
+    }
+
+  if (r == -1)
+    errno = e;
+
+  return r;
+}
+
+/* Give terminal to NPGRP iff it's currently owned by OPGRP.  FLAGS are the
+   flags to pass to give_terminal_to(). */
+static int
+maybe_give_terminal_to (opgrp, npgrp, flags)
+     pid_t opgrp, npgrp;
+     int flags;
+{
+  int tpgrp;
+
+  tpgrp = tcgetpgrp (shell_tty);
+  if (tpgrp < 0 && errno == ENOTTY)
+    return -1;
+  if (tpgrp == npgrp)
+    {
+      terminal_pgrp = npgrp;
+      return 0;
+    }
+  else if (tpgrp != opgrp)
+    {
+#if defined (DEBUG)
+      internal_warning ("%d: maybe_give_terminal_to: terminal pgrp == %d shell pgrp = %d new pgrp = %d in_background = %d", (int)getpid(), tpgrp, opgrp, npgrp, running_in_background);
+#endif
+      return -1;
+    }
+  else
+    return (give_terminal_to (npgrp, flags));     
+}
+
+/* Clear out any jobs in the job array.  This is intended to be used by
+   children of the shell, who should not have any job structures as baggage
+   when they start executing (forking subshells for parenthesized execution
+   and functions with pipes are the two that spring to mind).  If RUNNING_ONLY
+   is nonzero, only running jobs are removed from the table. */
+void
+delete_all_jobs (running_only)
+     int running_only;
+{
+  register int i;
+  sigset_t set, oset;
+
+  BLOCK_CHILD (set, oset);
+
+  /* XXX - need to set j_lastj, j_firstj appropriately if running_only != 0. */
+  if (js.j_jobslots)
+    {
+      js.j_current = js.j_previous = NO_JOB;
+
+      /* XXX could use js.j_firstj here */
+      for (i = 0; i < js.j_jobslots; i++)
+	{
+#if defined (DEBUG)
+	  if (i < js.j_firstj && jobs[i])
+	    itrace("delete_all_jobs: job %d non-null before js.j_firstj (%d)", i, js.j_firstj);
+	  if (i > js.j_lastj && jobs[i])
+	    itrace("delete_all_jobs: job %d non-null after js.j_lastj (%d)", i, js.j_lastj);
+#endif
+	  if (jobs[i] && (running_only == 0 || (running_only && RUNNING(i))))
+	    /* We don't want to add any of these pids to bgpids.  If running_only
+	       is non-zero, we don't want to add running jobs to the list.
+	       If we are interested in all jobs, not just running jobs, and
+	       we are going to clear the bgpids list below (bgp_clear()), we
+	       don't need to bother. */
+	    delete_job (i, DEL_WARNSTOPPED|DEL_NOBGPID);
+	}
+      if (running_only == 0)
+	{
+	  free ((char *)jobs);
+	  js.j_jobslots = 0;
+	  js.j_firstj = js.j_lastj = js.j_njobs = 0;
+	}
+    }
+
+  if (running_only == 0)
+    bgp_clear ();
+
+  UNBLOCK_CHILD (oset);
+}
+
+/* Mark all jobs in the job array so that they don't get a SIGHUP when the
+   shell gets one.  If RUNNING_ONLY is nonzero, mark only running jobs. */
+void
+nohup_all_jobs (running_only)
+     int running_only;
+{
+  register int i;
+  sigset_t set, oset;
+
+  BLOCK_CHILD (set, oset);
+
+  if (js.j_jobslots)
+    {
+      /* XXX could use js.j_firstj here */
+      for (i = 0; i < js.j_jobslots; i++)
+	if (jobs[i] && (running_only == 0 || (running_only && RUNNING(i))))
+	  nohup_job (i);
+    }
+
+  UNBLOCK_CHILD (oset);
+}
+
+int
+count_all_jobs ()
+{
+  int i, n;
+  sigset_t set, oset;
+
+  /* This really counts all non-dead jobs. */
+  BLOCK_CHILD (set, oset);
+  /* XXX could use js.j_firstj here */
+  for (i = n = 0; i < js.j_jobslots; i++)
+    {
+#if defined (DEBUG)
+      if (i < js.j_firstj && jobs[i])
+	itrace("count_all_jobs: job %d non-null before js.j_firstj (%d)", i, js.j_firstj);
+      if (i > js.j_lastj && jobs[i])
+	itrace("count_all_jobs: job %d non-null after js.j_lastj (%d)", i, js.j_lastj);
+#endif
+      if (jobs[i] && DEADJOB(i) == 0)
+	n++;
+    }
+  UNBLOCK_CHILD (oset);
+  return n;
+}
+
+static void
+mark_all_jobs_as_dead ()
+{
+  register int i;
+  sigset_t set, oset;
+
+  if (js.j_jobslots == 0)
+    return;
+
+  BLOCK_CHILD (set, oset);
+
+  /* XXX could use js.j_firstj here */
+  for (i = 0; i < js.j_jobslots; i++)
+    if (jobs[i])
+      {
+	jobs[i]->state = JDEAD;
+	js.j_ndead++;
+      }
+
+  UNBLOCK_CHILD (oset);
+}
+
+/* Mark all dead jobs as notified, so delete_job () cleans them out
+   of the job table properly.  POSIX.2 says we need to save the
+   status of the last CHILD_MAX jobs, so we count the number of dead
+   jobs and mark only enough as notified to save CHILD_MAX statuses. */
+static void
+mark_dead_jobs_as_notified (force)
+     int force;
+{
+  register int i, ndead, ndeadproc;
+  sigset_t set, oset;
+
+  if (js.j_jobslots == 0)
+    return;
+
+  BLOCK_CHILD (set, oset);
+
+  /* If FORCE is non-zero, we don't have to keep CHILD_MAX statuses
+     around; just run through the array. */
+  if (force)
+    {
+    /* XXX could use js.j_firstj here */
+      for (i = 0; i < js.j_jobslots; i++)
+	{
+	  if (jobs[i] && DEADJOB (i) && (interactive_shell || (find_last_pid (i, 0) != last_asynchronous_pid)))
+	    jobs[i]->flags |= J_NOTIFIED;
+	}
+      UNBLOCK_CHILD (oset);
+      return;
+    }
+
+  /* Mark enough dead jobs as notified to keep CHILD_MAX processes left in the
+     array with the corresponding not marked as notified.  This is a better
+     way to avoid pid aliasing and reuse problems than keeping the POSIX-
+     mandated CHILD_MAX jobs around.  delete_job() takes care of keeping the
+     bgpids list regulated. */
+
+  /* Count the number of dead jobs */
+  /* XXX could use js.j_firstj here */
+  for (i = ndead = ndeadproc = 0; i < js.j_jobslots; i++)
+    {
+#if defined (DEBUG)
+      if (i < js.j_firstj && jobs[i])
+	itrace("mark_dead_jobs_as_notified: job %d non-null before js.j_firstj (%d)", i, js.j_firstj);
+      if (i > js.j_lastj && jobs[i])
+	itrace("mark_dead_jobs_as_notified: job %d non-null after js.j_lastj (%d)", i, js.j_lastj);
+#endif
+      if (jobs[i] && DEADJOB (i))
+	{
+	  ndead++;
+	  ndeadproc += processes_in_job (i);
+	}
+    }
+
+#ifdef DEBUG
+# if 0
+  if (ndeadproc != js.c_reaped)
+    itrace("mark_dead_jobs_as_notified: ndeadproc (%d) != js.c_reaped (%d)", ndeadproc, js.c_reaped);
+# endif
+  if (ndead != js.j_ndead)
+    itrace("mark_dead_jobs_as_notified: ndead (%d) != js.j_ndead (%d)", ndead, js.j_ndead);
+#endif
+
+  if (js.c_childmax < 0)
+    set_maxchild (0);
+
+  /* Don't do anything if the number of dead processes is less than CHILD_MAX
+     and we're not forcing a cleanup. */
+  if (ndeadproc <= js.c_childmax)
+    {
+      UNBLOCK_CHILD (oset);
+      return;
+    }
+
+#if 0
+itrace("mark_dead_jobs_as_notified: child_max = %d ndead = %d ndeadproc = %d", js.c_childmax, ndead, ndeadproc);
+#endif
+
+  /* Mark enough dead jobs as notified that we keep CHILD_MAX jobs in
+     the list.  This isn't exactly right yet; changes need to be made
+     to stop_pipeline so we don't mark the newer jobs after we've
+     created CHILD_MAX slots in the jobs array.  This needs to be
+     integrated with a way to keep the jobs array from growing without
+     bound.  Maybe we wrap back around to 0 after we reach some max
+     limit, and there are sufficient job slots free (keep track of total
+     size of jobs array (js.j_jobslots) and running count of number of jobs
+     in jobs array.  Then keep a job index corresponding to the `oldest job'
+     and start this loop there, wrapping around as necessary.  In effect,
+     we turn the list into a circular buffer. */
+  /* XXX could use js.j_firstj here */
+  for (i = 0; i < js.j_jobslots; i++)
+    {
+      if (jobs[i] && DEADJOB (i) && (interactive_shell || (find_last_pid (i, 0) != last_asynchronous_pid)))
+	{
+#if defined (DEBUG)
+	  if (i < js.j_firstj && jobs[i])
+	    itrace("mark_dead_jobs_as_notified: job %d non-null before js.j_firstj (%d)", i, js.j_firstj);
+	  if (i > js.j_lastj && jobs[i])
+	    itrace("mark_dead_jobs_as_notified: job %d non-null after js.j_lastj (%d)", i, js.j_lastj);
+#endif
+	  /* If marking this job as notified would drop us down below
+	     child_max, don't mark it so we can keep at least child_max
+	     statuses.  XXX -- need to check what Posix actually says
+	     about keeping statuses. */
+	  if ((ndeadproc -= processes_in_job (i)) <= js.c_childmax)
+	    break;
+	  jobs[i]->flags |= J_NOTIFIED;
+	}
+    }
+
+  UNBLOCK_CHILD (oset);
+}
+
+/* Here to allow other parts of the shell (like the trap stuff) to
+   freeze and unfreeze the jobs list. */
+int
+freeze_jobs_list ()
+{
+  int o;
+
+  o = jobs_list_frozen;
+  jobs_list_frozen = 1;
+  return o;
+}
+
+void
+unfreeze_jobs_list ()
+{
+  jobs_list_frozen = 0;
+}
+
+void
+set_jobs_list_frozen (s)
+     int s;
+{
+  jobs_list_frozen = s;
+}
+
+/* Allow or disallow job control to take place.  Returns the old value
+   of job_control. */
+int
+set_job_control (arg)
+     int arg;
+{
+  int old;
+
+  old = job_control;
+  job_control = arg;
+
+  if (terminal_pgrp == NO_PID)
+    terminal_pgrp = tcgetpgrp (shell_tty);
+
+  /* If we're turning on job control we're going to want to know the shell's
+     process group. */
+  if (job_control != old && job_control)
+    shell_pgrp = getpgid (0);  
+
+  running_in_background = (terminal_pgrp != shell_pgrp);
+
+#if 0
+  if (interactive_shell == 0 && running_in_background == 0 && job_control != old)
+    {
+      if (job_control)
+	initialize_job_signals ();
+      else
+	default_tty_job_signals ();
+    }
+#endif
+
+  /* If we're turning on job control, reset pipeline_pgrp so make_child will
+     put new child processes into the right pgrp */
+  if (job_control != old && job_control)
+    pipeline_pgrp = 0;
+
+  return (old);
+}
+
+/* Turn off all traces of job control.  This is run by children of the shell
+   which are going to do shellsy things, like wait (), etc. */
+void
+without_job_control ()
+{
+  stop_making_children ();
+  start_pipeline ();
+#if defined (PGRP_PIPE)
+  sh_closepipe (pgrp_pipe);
+#endif
+  delete_all_jobs (0);
+  set_job_control (0);
+}
+
+/* If this shell is interactive, terminate all stopped jobs and
+   restore the original terminal process group.  This is done
+   before the `exec' builtin calls shell_execve. */
+void
+end_job_control ()
+{
+  if (job_control)
+    terminate_stopped_jobs ();
+
+  if (original_pgrp >= 0 && terminal_pgrp != original_pgrp)
+    give_terminal_to (original_pgrp, 1);
+
+  if (original_pgrp >= 0 && setpgid (0, original_pgrp) == 0)
+    shell_pgrp = original_pgrp;
+}
+
+/* Restart job control by closing shell tty and reinitializing.  This is
+   called after an exec fails in an interactive shell and we do not exit. */
+void
+restart_job_control ()
+{
+  if (shell_tty != -1)
+    close (shell_tty);
+  initialize_job_control (0);
+}
+
+/* Set the maximum number of background children we keep track of to NCHILD.
+   If the caller passes NCHILD as 0 or -1, this ends up setting it to
+   LMAXCHILD, which is initialized the first time through. */
+void
+set_maxchild (nchild)
+     int nchild;
+{
+  static int lmaxchild = -1;
+
+  /* Initialize once. */
+  if (lmaxchild < 0)
+    {
+      errno = 0;
+      lmaxchild = getmaxchild ();
+      if (lmaxchild < 0 && errno == 0)
+        lmaxchild = MAX_CHILD_MAX;		/* assume unlimited */
+    }
+  if (lmaxchild < 0)
+    lmaxchild = DEFAULT_CHILD_MAX;
+
+  /* Clamp value we set.  Minimum is what Posix requires, maximum is defined
+     above as MAX_CHILD_MAX. */
+  if (nchild < lmaxchild)
+    nchild = lmaxchild;
+  else if (nchild > MAX_CHILD_MAX)
+    nchild = MAX_CHILD_MAX;
+
+  js.c_childmax = nchild;
+}
+
+/* Set the handler to run when the shell receives a SIGCHLD signal. */
+void
+set_sigchld_handler ()
+{
+  set_signal_handler (SIGCHLD, sigchld_handler);
+}
+
+#if defined (PGRP_PIPE)
+/* Read from the read end of a pipe.  This is how the process group leader
+   blocks until all of the processes in a pipeline have been made. */
+static void
+pipe_read (pp)
+     int *pp;
+{
+  char ch;
+
+  if (pp[1] >= 0)
+    {
+      close (pp[1]);
+      pp[1] = -1;
+    }
+
+  if (pp[0] >= 0)
+    {
+      while (read (pp[0], &ch, 1) == -1 && errno == EINTR)
+	;
+    }
+}
+
+/* Functional interface closes our local-to-job-control pipes. */
+void
+close_pgrp_pipe ()
+{
+  sh_closepipe (pgrp_pipe);
+}
+
+void
+save_pgrp_pipe (p, clear)
+     int *p;
+     int clear;
+{
+  p[0] = pgrp_pipe[0];
+  p[1] = pgrp_pipe[1];
+  if (clear)
+    pgrp_pipe[0] = pgrp_pipe[1] = -1;
+}
+
+void
+restore_pgrp_pipe (p)
+     int *p;
+{
+  pgrp_pipe[0] = p[0];
+  pgrp_pipe[1] = p[1];
+}
+
+#endif /* PGRP_PIPE */
diff --git a/jobs.h b/jobs.h
new file mode 100644
index 0000000..43ba8c2
--- /dev/null
+++ b/jobs.h
@@ -0,0 +1,321 @@
+/* jobs.h -- structures and definitions used by the jobs.c file. */
+
+/* Copyright (C) 1993-2019  Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_JOBS_H_)
+#  define _JOBS_H_
+
+#include "quit.h"
+#include "siglist.h"
+
+#include "stdc.h"
+
+#include "posixwait.h"
+
+/* Defines controlling the fashion in which jobs are listed. */
+#define JLIST_STANDARD       0
+#define JLIST_LONG	     1
+#define JLIST_PID_ONLY	     2
+#define JLIST_CHANGED_ONLY   3
+#define JLIST_NONINTERACTIVE 4
+
+/* I looked it up.  For pretty_print_job ().  The real answer is 24. */
+#define LONGEST_SIGNAL_DESC 24
+
+/* Defines for the wait_for_* functions and for the wait builtin to use */
+#define JWAIT_PERROR		(1 << 0)
+#define JWAIT_FORCE		(1 << 1)
+#define JWAIT_NOWAIT		(1 << 2) /* don't waitpid(), just return status if already exited */
+#define JWAIT_WAITING		(1 << 3) /* wait for jobs marked J_WAITING only */
+
+/* flags for wait_for */
+#define JWAIT_NOTERM		(1 << 8) /* wait_for doesn't give terminal away */
+
+/* The max time to sleep while retrying fork() on EAGAIN failure */
+#define FORKSLEEP_MAX	16
+
+/* We keep an array of jobs.  Each entry in the array is a linked list
+   of processes that are piped together.  The first process encountered is
+   the group leader. */
+
+/* Values for the `running' field of a struct process. */
+#define PS_DONE		0
+#define PS_RUNNING	1
+#define PS_STOPPED	2
+#define PS_RECYCLED	4
+
+/* Each child of the shell is remembered in a STRUCT PROCESS.  A circular
+   chain of such structures is a pipeline. */
+typedef struct process {
+  struct process *next;	/* Next process in the pipeline.  A circular chain. */
+  pid_t pid;		/* Process ID. */
+  WAIT status;		/* The status of this command as returned by wait. */
+  int running;		/* Non-zero if this process is running. */
+  char *command;	/* The particular program that is running. */
+} PROCESS;
+
+struct pipeline_saver {
+  struct process *pipeline;
+  struct pipeline_saver *next;
+};
+
+/* PALIVE really means `not exited' */
+#define PSTOPPED(p)	(WIFSTOPPED((p)->status))
+#define PRUNNING(p)	((p)->running == PS_RUNNING)
+#define PALIVE(p)	(PRUNNING(p) || PSTOPPED(p))
+
+#define PEXITED(p)	((p)->running == PS_DONE)
+#if defined (RECYCLES_PIDS)
+#  define PRECYCLED(p)	((p)->running == PS_RECYCLED)
+#else
+#  define PRECYCLED(p)	(0)
+#endif
+#define PDEADPROC(p)	(PEXITED(p) || PRECYCLED(p))
+
+#define get_job_by_jid(ind)	(jobs[(ind)])
+
+/* A description of a pipeline's state. */
+typedef enum { JNONE = -1, JRUNNING = 1, JSTOPPED = 2, JDEAD = 4, JMIXED = 8 } JOB_STATE;
+#define JOBSTATE(job)	(jobs[(job)]->state)
+#define J_JOBSTATE(j)	((j)->state)
+
+#define STOPPED(j)	(jobs[(j)]->state == JSTOPPED)
+#define RUNNING(j)	(jobs[(j)]->state == JRUNNING)
+#define DEADJOB(j)	(jobs[(j)]->state == JDEAD)
+
+#define INVALID_JOB(j)	((j) < 0 || (j) >= js.j_jobslots || get_job_by_jid(j) == 0)
+
+/* Values for the FLAGS field in the JOB struct below. */
+#define J_FOREGROUND 0x01 /* Non-zero if this is running in the foreground.  */
+#define J_NOTIFIED   0x02 /* Non-zero if already notified about job state.   */
+#define J_JOBCONTROL 0x04 /* Non-zero if this job started under job control. */
+#define J_NOHUP      0x08 /* Don't send SIGHUP to job if shell gets SIGHUP. */
+#define J_STATSAVED  0x10 /* A process in this job had status saved via $! */
+#define J_ASYNC	     0x20 /* Job was started asynchronously */
+#define J_PIPEFAIL   0x40 /* pipefail set when job was started */
+#define J_WAITING    0x80 /* one of a list of jobs for which we are waiting */
+
+#define IS_FOREGROUND(j)	((jobs[j]->flags & J_FOREGROUND) != 0)
+#define IS_NOTIFIED(j)		((jobs[j]->flags & J_NOTIFIED) != 0)
+#define IS_JOBCONTROL(j)	((jobs[j]->flags & J_JOBCONTROL) != 0)
+#define IS_ASYNC(j)		((jobs[j]->flags & J_ASYNC) != 0)
+#define IS_WAITING(j)		((jobs[j]->flags & J_WAITING) != 0)
+
+typedef struct job {
+  char *wd;	   /* The working directory at time of invocation. */
+  PROCESS *pipe;   /* The pipeline of processes that make up this job. */
+  pid_t pgrp;	   /* The process ID of the process group (necessary). */
+  JOB_STATE state; /* The state that this job is in. */
+  int flags;	   /* Flags word: J_NOTIFIED, J_FOREGROUND, or J_JOBCONTROL. */
+#if defined (JOB_CONTROL)
+  COMMAND *deferred;	/* Commands that will execute when this job is done. */
+  sh_vptrfunc_t *j_cleanup; /* Cleanup function to call when job marked JDEAD */
+  PTR_T cleanarg;	/* Argument passed to (*j_cleanup)() */
+#endif /* JOB_CONTROL */
+} JOB;
+
+struct jobstats {
+  /* limits */
+  long c_childmax;
+  /* child process statistics */
+  int c_living;		/* running or stopped child processes */
+  int c_reaped;		/* exited child processes still in jobs list */
+  int c_injobs;		/* total number of child processes in jobs list */
+  /* child process totals */
+  int c_totforked;	/* total number of children this shell has forked */
+  int c_totreaped;	/* total number of children this shell has reaped */
+  /* job counters and indices */
+  int j_jobslots;	/* total size of jobs array */
+  int j_lastj;		/* last (newest) job allocated */
+  int j_firstj;		/* first (oldest) job allocated */
+  int j_njobs;		/* number of non-NULL jobs in jobs array */
+  int j_ndead;		/* number of JDEAD jobs in jobs array */
+  /* */
+  int j_current;	/* current job */
+  int j_previous;	/* previous job */
+  /* */
+  JOB *j_lastmade;	/* last job allocated by stop_pipeline */
+  JOB *j_lastasync;	/* last async job allocated by stop_pipeline */
+};
+
+/* Revised to accommodate new hash table bgpids implementation. */
+typedef pid_t ps_index_t;
+
+struct pidstat {
+  ps_index_t bucket_next;
+  ps_index_t bucket_prev;
+
+  pid_t pid;
+  bits16_t status;		/* only 8 bits really needed */
+};
+
+struct bgpids {
+  struct pidstat *storage;	/* storage arena */
+
+  ps_index_t head;
+  ps_index_t nalloc;
+
+  int npid;
+};
+
+#define NO_PIDSTAT (ps_index_t)-1
+
+/* standalone process status struct, without bgpids indexes */
+struct procstat {
+  pid_t pid;
+  bits16_t status;
+};
+
+/* A standalone singly-linked list of PROCESS *, used in various places
+   including keeping track of process substitutions. */
+struct procchain {
+  PROCESS *head;
+  PROCESS *end;
+  int nproc;
+};
+
+#define NO_JOB  -1	/* An impossible job array index. */
+#define DUP_JOB -2	/* A possible return value for get_job_spec (). */
+#define BAD_JOBSPEC -3	/* Bad syntax for job spec. */
+
+/* A value which cannot be a process ID. */
+#define NO_PID (pid_t)-1
+
+#define ANY_PID (pid_t)-1
+
+/* flags for make_child () */
+#define FORK_SYNC	0		/* normal synchronous process */
+#define FORK_ASYNC	1		/* background process */
+#define FORK_NOJOB	2		/* don't put process in separate pgrp */
+#define FORK_NOTERM	4		/* don't give terminal to any pgrp */
+
+/* System calls. */
+#if !defined (HAVE_UNISTD_H)
+extern pid_t fork (), getpid (), getpgrp ();
+#endif /* !HAVE_UNISTD_H */
+
+/* Stuff from the jobs.c file. */
+extern struct jobstats js;
+
+extern pid_t original_pgrp, shell_pgrp, pipeline_pgrp;
+extern volatile pid_t last_made_pid, last_asynchronous_pid;
+extern int asynchronous_notification;
+
+extern int already_making_children;
+extern int running_in_background;
+
+extern PROCESS *last_procsub_child;
+
+extern JOB **jobs;
+
+extern void making_children PARAMS((void));
+extern void stop_making_children PARAMS((void));
+extern void cleanup_the_pipeline PARAMS((void));
+extern void discard_last_procsub_child PARAMS((void));
+extern void save_pipeline PARAMS((int));
+extern PROCESS *restore_pipeline PARAMS((int));
+extern void start_pipeline PARAMS((void));
+extern int stop_pipeline PARAMS((int, COMMAND *));
+extern int discard_pipeline PARAMS((PROCESS *));
+extern void append_process PARAMS((char *, pid_t, int, int));
+
+extern void save_proc_status PARAMS((pid_t, int));
+
+extern PROCESS *procsub_add PARAMS((PROCESS *));
+extern PROCESS *procsub_search PARAMS((pid_t));
+extern PROCESS *procsub_delete PARAMS((pid_t));
+extern int procsub_waitpid PARAMS((pid_t));
+extern void procsub_waitall PARAMS((void));
+extern void procsub_clear PARAMS((void));
+extern void procsub_prune PARAMS((void));
+
+extern void delete_job PARAMS((int, int));
+extern void nohup_job PARAMS((int));
+extern void delete_all_jobs PARAMS((int));
+extern void nohup_all_jobs PARAMS((int));
+
+extern int count_all_jobs PARAMS((void));
+
+extern void terminate_current_pipeline PARAMS((void));
+extern void terminate_stopped_jobs PARAMS((void));
+extern void hangup_all_jobs PARAMS((void));
+extern void kill_current_pipeline PARAMS((void));
+
+#if defined (__STDC__) && defined (pid_t)
+extern int get_job_by_pid PARAMS((int, int, PROCESS **));
+extern void describe_pid PARAMS((int));
+#else
+extern int get_job_by_pid PARAMS((pid_t, int, PROCESS **));
+extern void describe_pid PARAMS((pid_t));
+#endif
+
+extern void list_one_job PARAMS((JOB *, int, int, int));
+extern void list_all_jobs PARAMS((int));
+extern void list_stopped_jobs PARAMS((int));
+extern void list_running_jobs PARAMS((int));
+
+extern pid_t make_child PARAMS((char *, int));
+
+extern int get_tty_state PARAMS((void));
+extern int set_tty_state PARAMS((void));
+
+extern int job_exit_status PARAMS((int));
+extern int job_exit_signal PARAMS((int));
+
+extern int wait_for_single_pid PARAMS((pid_t, int));
+extern void wait_for_background_pids PARAMS((struct procstat *));
+extern int wait_for PARAMS((pid_t, int));
+extern int wait_for_job PARAMS((int, int, struct procstat *));
+extern int wait_for_any_job PARAMS((int, struct procstat *));
+
+extern void wait_sigint_cleanup PARAMS((void));
+
+extern void notify_and_cleanup PARAMS((void));
+extern void reap_dead_jobs PARAMS((void));
+extern int start_job PARAMS((int, int));
+extern int kill_pid PARAMS((pid_t, int, int));
+extern int initialize_job_control PARAMS((int));
+extern void initialize_job_signals PARAMS((void));
+extern int give_terminal_to PARAMS((pid_t, int));
+
+extern void run_sigchld_trap PARAMS((int));
+
+extern int freeze_jobs_list PARAMS((void));
+extern void unfreeze_jobs_list PARAMS((void));
+extern void set_jobs_list_frozen PARAMS((int));
+extern int set_job_control PARAMS((int));
+extern void without_job_control PARAMS((void));
+extern void end_job_control PARAMS((void));
+extern void restart_job_control PARAMS((void));
+extern void set_sigchld_handler PARAMS((void));
+extern void ignore_tty_job_signals PARAMS((void));
+extern void default_tty_job_signals PARAMS((void));
+extern void get_original_tty_job_signals PARAMS((void));
+
+extern void init_job_stats PARAMS((void));
+
+extern void close_pgrp_pipe PARAMS((void));
+extern void save_pgrp_pipe PARAMS((int *, int));
+extern void restore_pgrp_pipe PARAMS((int *));
+
+extern void set_maxchild PARAMS((int));
+
+extern int job_control;		/* set to 0 in nojobs.c */
+
+#endif /* _JOBS_H_ */
diff --git a/lib/glob/Makefile.in b/lib/glob/Makefile.in
new file mode 100644
index 0000000..314622f
--- /dev/null
+++ b/lib/glob/Makefile.in
@@ -0,0 +1,168 @@
+## -*- text -*- ####################################################
+#								   #
+# Makefile for the GNU Glob Library.				   #
+#								   #
+####################################################################
+#
+# Copyright (C) 1996-2009 Free Software Foundation, Inc.     
+
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+srcdir = @srcdir@
+VPATH = @srcdir@
+topdir = @top_srcdir@
+BUILD_DIR = @BUILD_DIR@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+
+CC = @CC@
+RANLIB = @RANLIB@
+AR = @AR@
+ARFLAGS = @ARFLAGS@
+RM = rm -f
+CP = cp
+MV = mv
+
+SHELL = @MAKE_SHELL@
+
+PROFILE_FLAGS = @PROFILE_FLAGS@
+
+CFLAGS = @CFLAGS@
+LOCAL_CFLAGS = @LOCAL_CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@ @LOCAL_LDFLAGS@
+
+DEFS = @DEFS@
+LOCAL_DEFS = @LOCAL_DEFS@
+
+BASHINCDIR = ${topdir}/include
+
+INCLUDES = -I. -I../.. -I$(topdir) -I$(BASHINCDIR) -I$(topdir)/lib
+
+CCFLAGS = $(PROFILE_FLAGS) $(DEFS) $(LOCAL_DEFS) ${INCLUDES} $(CPPFLAGS) \
+	  $(LOCAL_CFLAGS) $(CFLAGS) ${ADDON_CFLAGS}
+
+# Here is a rule for making .o files from .c files that doesn't force
+# the type of the machine (like -sun3) into the flags.
+.c.o:
+	$(RM) $@
+	$(CC) -c $(CCFLAGS) $<
+
+# The name of the library target.
+LIBRARY_NAME = libglob.a
+
+# The C code source files for this library.
+CSOURCES = $(srcdir)/glob.c $(srcdir)/strmatch.c $(srcdir)/smatch.c \
+	   $(srcdir)/xmbsrtowcs.c
+
+# The header files for this library.
+HSOURCES = $(srcdir)/strmatch.h
+
+OBJECTS = glob.o strmatch.o smatch.o xmbsrtowcs.o gmisc.o
+
+# The texinfo files which document this library.
+DOCSOURCE = doc/glob.texi
+DOCOBJECT = doc/glob.dvi
+DOCSUPPORT = doc/Makefile
+DOCUMENTATION = $(DOCSOURCE) $(DOCOBJECT) $(DOCSUPPORT)
+
+SUPPORT = Makefile ChangeLog $(DOCSUPPORT)
+
+SOURCES  = $(CSOURCES) $(HSOURCES) $(DOCSOURCE)
+
+THINGS_TO_TAR = $(SOURCES) $(SUPPORT)
+
+######################################################################
+
+all: $(LIBRARY_NAME)
+
+$(LIBRARY_NAME): $(OBJECTS)
+	$(RM) -f $@
+	$(AR) $(ARFLAGS) $@ $(OBJECTS)
+	-test -n "$(RANLIB)" && $(RANLIB) $@
+
+what-tar:
+	@for file in $(THINGS_TO_TAR); do \
+	  echo $(selfdir)$$file; \
+	done
+
+documentation: force
+	-(cd doc; $(MAKE) $(MFLAGS))
+force:
+
+# The rule for 'includes' is written funny so that the if statement
+# always returns TRUE unless there really was an error installing the
+# include files.
+install:
+
+clean:
+	rm -f $(OBJECTS) $(LIBRARY_NAME)
+	-(cd doc && $(MAKE) $(MFLAGS) $@ )
+
+realclean distclean maintainer-clean: clean
+	-( cd doc && $(MAKE) $(MFLAGS) $@ )
+	$(RM) -f Makefile
+
+mostlyclean: clean
+	-( cd doc && $(MAKE) $(MFLAGS) $@ )
+
+${BUILD_DIR}/pathnames.h: ${BUILD_DIR}/config.h ${BUILD_DIR}/Makefile Makefile
+	-( cd ${BUILD_DIR} && ${MAKE} ${MFLAGS} pathnames.h )
+
+######################################################################
+#								     #
+#  Dependencies for the object files which make up this library.     #
+#								     #
+######################################################################
+
+smatch.o: strmatch.h
+smatch.o: $(BUILD_DIR)/config.h
+smatch.o: $(BASHINCDIR)/chartypes.h
+smatch.o: $(BASHINCDIR)/ansi_stdlib.h $(topdir)/bashansi.h
+smatch.o: $(BASHINCDIR)/shmbutil.h
+smatch.o: $(topdir)/xmalloc.h
+
+strmatch.o: strmatch.h
+strmatch.o: $(BUILD_DIR)/config.h
+strmatch.o: $(BASHINCDIR)/stdc.h
+
+glob.o: $(BUILD_DIR)/config.h
+glob.o: $(topdir)/shell.h $(BUILD_DIR)/pathnames.h
+glob.o: $(topdir)/bashtypes.h $(BASHINCDIR)/ansi_stdlib.h $(topdir)/bashansi.h
+glob.o: $(BASHINCDIR)/posixstat.h $(BASHINCDIR)/memalloc.h
+glob.o: strmatch.h glob.h
+glob.o: $(BASHINCDIR)/shmbutil.h
+glob.o: $(topdir)/xmalloc.h
+
+gmisc.o: $(BUILD_DIR)/config.h
+gmisc.o: $(topdir)/bashtypes.h $(BASHINCDIR)/ansi_stdlib.h $(topdir)/bashansi.h
+gmisc.o: $(BASHINCDIR)/shmbutil.h
+
+xmbsrtowcs.o: ${BUILD_DIR}/config.h
+xmbsrtowcs.o: ${topdir}/bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+xmbsrtowcs.o: ${BASHINCDIR}/shmbutil.h
+
+# Rules for deficient makes, like SunOS and Solaris
+glob.o: glob.c
+gmisc.o: gmisc.c
+strmatch.o: strmatch.c
+smatch.o: smatch.c
+xmbsrtowcs.o: xmbsrtowcs.c
+
+# dependencies for C files that include other C files
+glob.o: glob_loop.c
+gmisc.o: gm_loop.c
+smatch.o: sm_loop.c
diff --git a/lib/glob/collsyms.h b/lib/glob/collsyms.h
new file mode 100644
index 0000000..d56df61
--- /dev/null
+++ b/lib/glob/collsyms.h
@@ -0,0 +1,140 @@
+/* collsyms.h -- collating symbol names and their corresponding characters
+		 (in ascii) as given by POSIX.2 in table 2.8. */
+
+/* Copyright (C) 1997-2002 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* The upper-case letters, lower-case letters, and digits are omitted from
+   this table.  The digits are not included in the table in the POSIX.2
+   spec.  The upper and lower case letters are translated by the code
+   in smatch.c:collsym(). */
+
+typedef struct _COLLSYM {
+  XCHAR *name;
+  CHAR code;
+} __COLLSYM;
+
+static __COLLSYM POSIXCOLL [] =
+{
+	{  L("NUL"),			L('\0') },
+	{  L("SOH"),			L('\001') },
+	{  L("STX"),			L('\002') },
+	{  L("ETX"),			L('\003') },
+	{  L("EOT"),			L('\004') },
+	{  L("ENQ"),			L('\005') },
+	{  L("ACK"),			L('\006') },
+#ifdef __STDC__
+	{  L("alert"),			L('\a') },
+#else
+	{  L("alert"),			L('\007') },
+#endif
+	{  L("BS"),			L('\010') },
+	{  L("backspace"),		L('\b') },
+	{  L("HT"),			L('\011') },
+	{  L("tab"),			L('\t') },
+	{  L("LF"),			L('\012') },
+	{  L("newline"),		L('\n') },
+	{  L("VT"),			L('\013') },
+	{  L("vertical-tab"),		L('\v') },
+	{  L("FF"),			L('\014') },
+	{  L("form-feed"),		L('\f') },
+	{  L("CR"),			L('\015') },
+	{  L("carriage-return"),	L('\r') },
+	{  L("SO"),			L('\016') },
+	{  L("SI"),			L('\017') },
+	{  L("DLE"),			L('\020') },
+	{  L("DC1"),			L('\021') },
+	{  L("DC2"),			L('\022') },
+	{  L("DC3"),			L('\023') },
+	{  L("DC4"),			L('\024') },
+	{  L("NAK"),			L('\025') },
+	{  L("SYN"),			L('\026') },
+	{  L("ETB"),			L('\027') },
+	{  L("CAN"),			L('\030') },
+	{  L("EM"),			L('\031') },
+	{  L("SUB"),			L('\032') },
+	{  L("ESC"),			L('\033') },
+	{  L("IS4"),			L('\034') },
+	{  L("FS"),			L('\034') },
+	{  L("IS3"),			L('\035') },
+	{  L("GS"),			L('\035') },
+	{  L("IS2"),			L('\036') },
+	{  L("RS"),			L('\036') },
+	{  L("IS1"),			L('\037') },
+	{  L("US"),			L('\037') },
+	{  L("space"),			L(' ') },
+	{  L("exclamation-mark"),	L('!') },
+	{  L("quotation-mark"),		L('"') },
+	{  L("number-sign"),		L('#') },
+	{  L("dollar-sign"),		L('$') },
+	{  L("percent-sign"),		L('%') },
+	{  L("ampersand"),		L('&') },
+	{  L("apostrophe"),		L('\'') },
+	{  L("left-parenthesis"),	L('(') },
+	{  L("right-parenthesis"),	L(')') },
+	{  L("asterisk"),		L('*') },
+	{  L("plus-sign"),		L('+') },
+	{  L("comma"),			L(',') },
+	{  L("hyphen"),			L('-') },
+	{  L("hyphen-minus"),		L('-') },
+	{  L("minus"),			L('-') },	/* extension from POSIX.2 */
+	{  L("dash"),			L('-') },	/* extension from POSIX.2 */
+	{  L("period"),			L('.') },
+	{  L("full-stop"),		L('.') },
+	{  L("slash"),			L('/') },
+	{  L("solidus"),		L('/') },	/* extension from POSIX.2 */
+	{  L("zero"),			L('0') },
+	{  L("one"),			L('1') },
+	{  L("two"),			L('2') },
+	{  L("three"),			L('3') },
+	{  L("four"),			L('4') },
+	{  L("five"),			L('5') },
+	{  L("six"),			L('6') },
+	{  L("seven"),			L('7') },
+	{  L("eight"),			L('8') },
+	{  L("nine"),			L('9') },
+	{  L("colon"),			L(':') },
+	{  L("semicolon"),		L(';') },
+	{  L("less-than-sign"),		L('<') },
+	{  L("equals-sign"),		L('=') },
+	{  L("greater-than-sign"),	L('>') },
+	{  L("question-mark"),		L('?') },
+	{  L("commercial-at"),		L('@') },
+	/* upper-case letters omitted */
+	{  L("left-square-bracket"),	L('[') },
+	{  L("backslash"),		L('\\') },
+	{  L("reverse-solidus"),	L('\\') },
+	{  L("right-square-bracket"),	L(']') },
+	{  L("circumflex"),		L('^') },
+	{  L("circumflex-accent"),	L('^') },	/* extension from POSIX.2 */
+	{  L("underscore"),		L('_') },
+	{  L("grave-accent"),		L('`') },
+	/* lower-case letters omitted */
+	{  L("left-brace"),		L('{') },	/* extension from POSIX.2 */
+	{  L("left-curly-bracket"),	L('{') },
+	{  L("vertical-line"),		L('|') },
+	{  L("right-brace"),		L('}') },	/* extension from POSIX.2 */
+	{  L("right-curly-bracket"),	L('}') },
+	{  L("tilde"),			L('~') },
+	{  L("DEL"),			L('\177') },
+	{  0,	0 },
+};
+
+#undef _COLLSYM
+#undef __COLLSYM
+#undef POSIXCOLL
diff --git a/lib/glob/doc/Makefile b/lib/glob/doc/Makefile
new file mode 100644
index 0000000..8dca606
--- /dev/null
+++ b/lib/glob/doc/Makefile
@@ -0,0 +1,5 @@
+all:
+	cp glob.texi glob.info
+
+clean distclean mostlyclean maintainer-clean:
+	rm -f glob.?? glob.info
diff --git a/lib/glob/doc/glob.texi b/lib/glob/doc/glob.texi
new file mode 100644
index 0000000..0262ef1
--- /dev/null
+++ b/lib/glob/doc/glob.texi
@@ -0,0 +1 @@
+Nothing happens here.
diff --git a/lib/glob/glob.c b/lib/glob/glob.c
new file mode 100644
index 0000000..eb6277f
--- /dev/null
+++ b/lib/glob/glob.c
@@ -0,0 +1,1554 @@
+/* glob.c -- file-name wildcard pattern matching for Bash.
+
+   Copyright (C) 1985-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne-Again SHell.
+   
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* To whomever it may concern: I have never seen the code which most
+   Unix programs use to perform this function.  I wrote this from scratch
+   based on specifications for the pattern matching.  --RMS.  */
+
+#include <config.h>
+
+#if !defined (__GNUC__) && !defined (HAVE_ALLOCA_H) && defined (_AIX)
+  #pragma alloca
+#endif /* _AIX && RISC6000 && !__GNUC__ */
+
+#include "bashtypes.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "bashansi.h"
+#include "posixdir.h"
+#include "posixstat.h"
+#include "shmbutil.h"
+#include "xmalloc.h"
+
+#include "filecntl.h"
+#if !defined (F_OK)
+#  define F_OK 0
+#endif
+
+#include "stdc.h"
+#include "memalloc.h"
+
+#include <signal.h>
+
+#include "shell.h"
+#include "general.h"
+
+#include "glob.h"
+#include "strmatch.h"
+
+#if !defined (HAVE_BCOPY) && !defined (bcopy)
+#  define bcopy(s, d, n) ((void) memcpy ((d), (s), (n)))
+#endif /* !HAVE_BCOPY && !bcopy */
+
+#if !defined (NULL)
+#  if defined (__STDC__)
+#    define NULL ((void *) 0)
+#  else
+#    define NULL 0x0
+#  endif /* __STDC__ */
+#endif /* !NULL */
+
+#if !defined (FREE)
+#  define FREE(x)	if (x) free (x)
+#endif
+
+/* Don't try to alloca() more than this much memory for `struct globval'
+   in glob_vector() */
+#ifndef ALLOCA_MAX
+#  define ALLOCA_MAX	100000
+#endif
+
+struct globval
+  {
+    struct globval *next;
+    char *name;
+  };
+
+extern void throw_to_top_level PARAMS((void));
+extern int sh_eaccess PARAMS((const char *, int));
+extern char *sh_makepath PARAMS((const char *, const char *, int));
+extern int signal_is_pending PARAMS((int));
+extern void run_pending_traps PARAMS((void));
+
+extern int extended_glob;
+
+/* Global variable which controls whether or not * matches .*.
+   Non-zero means don't match .*.  */
+int noglob_dot_filenames = 1;
+
+/* Global variable which controls whether or not filename globbing
+   is done without regard to case. */
+int glob_ignore_case = 0;
+
+/* Global variable controlling whether globbing ever returns . or ..
+   regardless of the pattern. If set to 1, no glob pattern will ever
+   match `.' or `..'. Disabled by default. */
+int glob_always_skip_dot_and_dotdot = 0;
+
+/* Global variable to return to signify an error in globbing. */
+char *glob_error_return;
+
+static struct globval finddirs_error_return;
+
+/* Some forward declarations. */
+static int skipname PARAMS((char *, char *, int));
+#if HANDLE_MULTIBYTE
+static int mbskipname PARAMS((char *, char *, int));
+#endif
+void udequote_pathname PARAMS((char *));
+#if HANDLE_MULTIBYTE
+void wcdequote_pathname PARAMS((wchar_t *));
+static void wdequote_pathname PARAMS((char *));
+#else
+#  define dequote_pathname udequote_pathname
+#endif
+static void dequote_pathname PARAMS((char *));
+static int glob_testdir PARAMS((char *, int));
+static char **glob_dir_to_array PARAMS((char *, char **, int));
+
+/* Make sure these names continue to agree with what's in smatch.c */
+extern char *glob_patscan PARAMS((char *, char *, int));
+extern wchar_t *glob_patscan_wc PARAMS((wchar_t *, wchar_t *, int));
+
+/* And this from gmisc.c/gm_loop.c */
+extern int wextglob_pattern_p PARAMS((wchar_t *));
+
+extern char *glob_dirscan PARAMS((char *, int));
+
+/* Compile `glob_loop.c' for single-byte characters. */
+#define GCHAR	unsigned char
+#define CHAR	char
+#define INT	int
+#define L(CS)	CS
+#define INTERNAL_GLOB_PATTERN_P internal_glob_pattern_p
+#include "glob_loop.c"
+
+/* Compile `glob_loop.c' again for multibyte characters. */
+#if HANDLE_MULTIBYTE
+
+#define GCHAR	wchar_t
+#define CHAR	wchar_t
+#define INT	wint_t
+#define L(CS)	L##CS
+#define INTERNAL_GLOB_PATTERN_P internal_glob_wpattern_p
+#include "glob_loop.c"
+
+#endif /* HANDLE_MULTIBYTE */
+
+/* And now a function that calls either the single-byte or multibyte version
+   of internal_glob_pattern_p. */
+int
+glob_pattern_p (pattern)
+     const char *pattern;
+{
+#if HANDLE_MULTIBYTE
+  size_t n;
+  wchar_t *wpattern;
+  int r;
+
+  if (MB_CUR_MAX == 1 || mbsmbchar (pattern) == 0)
+    return (internal_glob_pattern_p ((unsigned char *)pattern));
+
+  /* Convert strings to wide chars, and call the multibyte version. */
+  n = xdupmbstowcs (&wpattern, NULL, pattern);
+  if (n == (size_t)-1)
+    /* Oops.  Invalid multibyte sequence.  Try it as single-byte sequence. */
+    return (internal_glob_pattern_p ((unsigned char *)pattern));
+
+  r = internal_glob_wpattern_p (wpattern);
+  free (wpattern);
+
+  return r;
+#else
+  return (internal_glob_pattern_p ((unsigned char *)pattern));
+#endif
+}
+
+#if EXTENDED_GLOB
+/* Return 1 if all subpatterns in the extended globbing pattern PAT indicate
+   that the name should be skipped.  XXX - doesn't handle pattern negation,
+   not sure if it should */
+static int
+extglob_skipname (pat, dname, flags)
+     char *pat, *dname;
+     int flags;
+{
+  char *pp, *pe, *t, *se;
+  int n, r, negate, wild, nullpat;
+
+  negate = *pat == '!';
+  wild = *pat == '*' || *pat == '?';
+  pp = pat + 2;
+  se = pp + strlen (pp) - 1;		/* end of string */
+  pe = glob_patscan (pp, se, 0);	/* end of extglob pattern (( */
+  /* we should check for invalid extglob pattern here */
+  if (pe == 0)
+    return 0;
+
+  /* if pe != se we have more of the pattern at the end of the extglob
+     pattern. Check the easy case first ( */
+  if (pe == se && *pe == ')' && (t = strchr (pp, '|')) == 0)
+    {
+      *pe = '\0';
+#if defined (HANDLE_MULTIBYTE)
+      r = mbskipname (pp, dname, flags);
+#else
+      r = skipname (pp, dname, flags);	/*(*/
+#endif
+      *pe = ')';
+      if (wild && pe[1])	/* if we can match zero instances, check further */
+        return (skipname (pe+1, dname, flags));
+      return r;
+    }
+
+  /* Is the extglob pattern between the parens the null pattern?  The null
+     pattern can match nothing, so should we check any remaining portion of
+     the pattern? */
+  nullpat = pe >= (pat + 2) && pe[-2] == '(' && pe[-1] == ')';
+
+  /* check every subpattern */
+  while (t = glob_patscan (pp, pe, '|'))
+    {
+      n = t[-1];	/* ( */
+      if (extglob_pattern_p (pp) && n == ')')
+	t[-1] = n;	/* no-op for now */
+      else
+	t[-1] = '\0';
+#if defined (HANDLE_MULTIBYTE)
+      r = mbskipname (pp, dname, flags);
+#else
+      r = skipname (pp, dname, flags);
+#endif
+      t[-1] = n;
+      if (r == 0)	/* if any pattern says not skip, we don't skip */
+        return r;
+      pp = t;
+    }	/*(*/
+
+  /* glob_patscan might find end of string */
+  if (pp == se)
+    return r;
+
+  /* but if it doesn't then we didn't match a leading dot */
+  if (wild && *pe)	/* if we can match zero instances, check further */
+    return (skipname (pe, dname, flags));
+  return 1;
+}
+#endif
+
+/* Return 1 if DNAME should be skipped according to PAT.  Mostly concerned
+   with matching leading `.'. */
+static int
+skipname (pat, dname, flags)
+     char *pat;
+     char *dname;
+     int flags;
+{
+#if EXTENDED_GLOB
+  if (extglob_pattern_p (pat))		/* XXX */
+    return (extglob_skipname (pat, dname, flags));
+#endif
+
+  if (glob_always_skip_dot_and_dotdot && DOT_OR_DOTDOT (dname))
+    return 1;
+
+  /* If a leading dot need not be explicitly matched, and the pattern
+     doesn't start with a `.', don't match `.' or `..' */
+  if (noglob_dot_filenames == 0 && pat[0] != '.' &&
+	(pat[0] != '\\' || pat[1] != '.') &&
+	DOT_OR_DOTDOT (dname))
+    return 1;
+
+  /* If a dot must be explicitly matched, check to see if they do. */
+  else if (noglob_dot_filenames && dname[0] == '.' && pat[0] != '.' &&
+	(pat[0] != '\\' || pat[1] != '.'))
+    return 1;
+
+  return 0;
+}
+
+#if HANDLE_MULTIBYTE
+
+static int
+wskipname (pat, dname, flags)
+     wchar_t *pat, *dname;
+     int flags;
+{
+  if (glob_always_skip_dot_and_dotdot && WDOT_OR_DOTDOT (dname))
+    return 1;
+
+  /* If a leading dot need not be explicitly matched, and the
+     pattern doesn't start with a `.', don't match `.' or `..' */
+  if (noglob_dot_filenames == 0 && pat[0] != L'.' &&
+	(pat[0] != L'\\' || pat[1] != L'.') &&
+	WDOT_OR_DOTDOT (dname))
+    return 1;
+
+  /* If a leading dot must be explicitly matched, check to see if the
+     pattern and dirname both have one. */
+ else if (noglob_dot_filenames && dname[0] == L'.' &&
+	pat[0] != L'.' &&
+	   (pat[0] != L'\\' || pat[1] != L'.'))
+    return 1;
+
+  return 0;
+}
+
+static int
+wextglob_skipname (pat, dname, flags)
+     wchar_t *pat, *dname;
+     int flags;
+{
+#if EXTENDED_GLOB
+  wchar_t *pp, *pe, *t, n, *se;
+  int r, negate, wild, nullpat;
+
+  negate = *pat == L'!';
+  wild = *pat == L'*' || *pat == L'?';
+  pp = pat + 2;
+  se = pp + wcslen (pp) - 1;	/*(*/
+  pe = glob_patscan_wc (pp, se, 0);
+
+  if (pe == se && *pe == ')' && (t = wcschr (pp, L'|')) == 0)
+    {
+      *pe = L'\0';
+      r = wskipname (pp, dname, flags); /*(*/
+      *pe = L')';
+      if (wild && pe[1] != L'\0')
+        return (wskipname (pe+1, dname, flags));
+      return r;
+    }
+
+  /* Is the extglob pattern between the parens the null pattern?  The null
+     pattern can match nothing, so should we check any remaining portion of
+     the pattern? */
+  nullpat = pe >= (pat + 2) && pe[-2] == L'(' && pe[-1] == L')';
+
+  /* check every subpattern */
+  while (t = glob_patscan_wc (pp, pe, '|'))
+    {
+      n = t[-1];	/* ( */
+      if (wextglob_pattern_p (pp) && n == L')')
+	t[-1] = n;	/* no-op for now */
+      else
+	t[-1] = L'\0';
+      r = wskipname (pp, dname, flags);
+      t[-1] = n;
+      if (r == 0)
+	return 0;
+      pp = t;
+    }
+
+  if (pp == pe)		/* glob_patscan_wc might find end of pattern */
+    return r;
+
+  /* but if it doesn't then we didn't match a leading dot */
+  if (wild && *pe != L'\0')
+    return (wskipname (pe, dname, flags));
+  return 1;
+#else
+  return (wskipname (pat, dname, flags));
+#endif
+}
+
+/* Return 1 if DNAME should be skipped according to PAT.  Handles multibyte
+   characters in PAT and DNAME.  Mostly concerned with matching leading `.'. */
+static int
+mbskipname (pat, dname, flags)
+     char *pat, *dname;
+     int flags;
+{
+  int ret, ext;
+  wchar_t *pat_wc, *dn_wc;
+  size_t pat_n, dn_n;
+
+  if (mbsmbchar (dname) == 0 && mbsmbchar (pat) == 0)
+    return (skipname (pat, dname, flags));
+
+  ext = 0;
+#if EXTENDED_GLOB
+  ext = extglob_pattern_p (pat);
+#endif
+
+  pat_wc = dn_wc = (wchar_t *)NULL;
+
+  pat_n = xdupmbstowcs (&pat_wc, NULL, pat);
+  if (pat_n != (size_t)-1)
+    dn_n = xdupmbstowcs (&dn_wc, NULL, dname);
+
+  ret = 0;
+  if (pat_n != (size_t)-1 && dn_n !=(size_t)-1)
+    ret = ext ? wextglob_skipname (pat_wc, dn_wc, flags) : wskipname (pat_wc, dn_wc, flags);
+  else
+    ret = skipname (pat, dname, flags);
+
+  FREE (pat_wc);
+  FREE (dn_wc);
+
+  return ret;
+}
+#endif /* HANDLE_MULTIBYTE */
+
+/* Remove backslashes quoting characters in PATHNAME by modifying PATHNAME. */
+void
+udequote_pathname (pathname)
+     char *pathname;
+{
+  register int i, j;
+
+  for (i = j = 0; pathname && pathname[i]; )
+    {
+      if (pathname[i] == '\\')
+	i++;
+
+      pathname[j++] = pathname[i++];
+
+      if (pathname[i - 1] == 0)
+	break;
+    }
+  if (pathname)
+    pathname[j] = '\0';
+}
+
+#if HANDLE_MULTIBYTE
+/* Remove backslashes quoting characters in PATHNAME by modifying PATHNAME. */
+void
+wcdequote_pathname (wpathname)
+     wchar_t *wpathname;
+{
+  int i, j;
+
+  for (i = j = 0; wpathname && wpathname[i]; )
+    {
+      if (wpathname[i] == L'\\')
+	i++;
+
+      wpathname[j++] = wpathname[i++];
+
+      if (wpathname[i - 1] == L'\0')
+	break;
+    }
+  if (wpathname)
+    wpathname[j] = L'\0';
+}
+
+static void
+wdequote_pathname (pathname)
+     char *pathname;
+{
+  mbstate_t ps;
+  size_t len, n;
+  wchar_t *wpathname;
+  int i, j;
+  wchar_t *orig_wpathname;
+
+  if (mbsmbchar (pathname) == 0)
+    {
+      udequote_pathname (pathname);
+      return;
+    }
+
+  len = strlen (pathname);
+  /* Convert the strings into wide characters.  */
+  n = xdupmbstowcs (&wpathname, NULL, pathname);
+  if (n == (size_t) -1)
+    {
+      /* Something wrong.  Fall back to single-byte */
+      udequote_pathname (pathname);
+      return;
+    }
+  orig_wpathname = wpathname;
+
+  wcdequote_pathname (wpathname);
+
+  /* Convert the wide character string into unibyte character set. */
+  memset (&ps, '\0', sizeof(mbstate_t));
+  n = wcsrtombs(pathname, (const wchar_t **)&wpathname, len, &ps);
+  if (n == (size_t)-1 || (wpathname && *wpathname != 0))	/* what? now you tell me? */
+    {
+      wpathname = orig_wpathname;
+      memset (&ps, '\0', sizeof(mbstate_t));
+      n = xwcsrtombs (pathname, (const wchar_t **)&wpathname, len, &ps);
+    }
+  pathname[len] = '\0';
+
+  /* Can't just free wpathname here; wcsrtombs changes it in many cases. */
+  free (orig_wpathname);
+}
+
+static void
+dequote_pathname (pathname)
+     char *pathname;
+{
+  if (MB_CUR_MAX > 1)
+    wdequote_pathname (pathname);
+  else
+    udequote_pathname (pathname);
+}
+#endif /* HANDLE_MULTIBYTE */
+
+/* Test whether NAME exists. */
+
+#if defined (HAVE_LSTAT)
+#  define GLOB_TESTNAME(name)  (lstat (name, &finfo))
+#else /* !HAVE_LSTAT */
+#  if !defined (AFS)
+#    define GLOB_TESTNAME(name)  (sh_eaccess (name, F_OK))
+#  else /* AFS */
+#    define GLOB_TESTNAME(name)  (access (name, F_OK))
+#  endif /* AFS */
+#endif /* !HAVE_LSTAT */
+
+/* Return 0 if DIR is a directory, -2 if DIR is a symlink,  -1 otherwise. */
+static int
+glob_testdir (dir, flags)
+     char *dir;
+     int flags;
+{
+  struct stat finfo;
+  int r;
+
+/*itrace("glob_testdir: testing %s" flags = %d, dir, flags);*/
+#if defined (HAVE_LSTAT)
+  r = (flags & GX_ALLDIRS) ? lstat (dir, &finfo) : stat (dir, &finfo);
+#else
+  r = stat (dir, &finfo);
+#endif
+  if (r < 0)
+    return (-1);
+
+#if defined (S_ISLNK)
+  if (S_ISLNK (finfo.st_mode))
+    return (-2);
+#endif
+
+  if (S_ISDIR (finfo.st_mode) == 0)
+    return (-1);
+
+  return (0);
+}
+
+/* Recursively scan SDIR for directories matching PAT (PAT is always `**').
+   FLAGS is simply passed down to the recursive call to glob_vector.  Returns
+   a list of matching directory names.  EP, if non-null, is set to the last
+   element of the returned list.  NP, if non-null, is set to the number of
+   directories in the returned list.  These two variables exist for the
+   convenience of the caller (always glob_vector). */
+static struct globval *
+finddirs (pat, sdir, flags, ep, np)
+     char *pat;
+     char *sdir;
+     int flags;
+     struct globval **ep;
+     int *np;
+{
+  char **r, *n;
+  int ndirs;
+  struct globval *ret, *e, *g;
+
+/*itrace("finddirs: pat = `%s' sdir = `%s' flags = 0x%x", pat, sdir, flags);*/
+  e = ret = 0;
+  r = glob_vector (pat, sdir, flags);
+  if (r == 0 || r[0] == 0)
+    {
+      if (np)
+	*np = 0;
+      if (ep)
+        *ep = 0;
+      if (r && r != &glob_error_return)
+	free (r);
+      return (struct globval *)0;
+    }
+  for (ndirs = 0; r[ndirs] != 0; ndirs++)
+    {
+      g = (struct globval *) malloc (sizeof (struct globval));
+      if (g == 0)
+	{
+	  while (ret)		/* free list built so far */
+	    {
+	      g = ret->next;
+	      free (ret);
+	      ret = g;
+	    }
+
+	  free (r);
+	  if (np)
+	    *np = 0;
+	  if (ep)
+	    *ep = 0;
+	  return (&finddirs_error_return);
+	}
+      if (e == 0)
+	e = g;
+
+      g->next = ret;
+      ret = g;
+
+      g->name = r[ndirs];
+    }
+
+  free (r);
+  if (ep)
+    *ep = e;
+  if (np)
+    *np = ndirs;
+
+  return ret;
+}
+     	
+/* Return a vector of names of files in directory DIR
+   whose names match glob pattern PAT.
+   The names are not in any particular order.
+   Wildcards at the beginning of PAT do not match an initial period.
+
+   The vector is terminated by an element that is a null pointer.
+
+   To free the space allocated, first free the vector's elements,
+   then free the vector.
+
+   Return 0 if cannot get enough memory to hold the pointer
+   and the names.
+
+   Return -1 if cannot access directory DIR.
+   Look in errno for more information.  */
+
+char **
+glob_vector (pat, dir, flags)
+     char *pat;
+     char *dir;
+     int flags;
+{
+  DIR *d;
+  register struct dirent *dp;
+  struct globval *lastlink, *e, *dirlist;
+  register struct globval *nextlink;
+  register char *nextname, *npat, *subdir;
+  unsigned int count;
+  int lose, skip, ndirs, isdir, sdlen, add_current, patlen;
+  register char **name_vector;
+  register unsigned int i;
+  int mflags;		/* Flags passed to strmatch (). */
+  int pflags;		/* flags passed to sh_makepath () */
+  int hasglob;		/* return value from glob_pattern_p */
+  int nalloca;
+  struct globval *firstmalloc, *tmplink;
+  char *convfn;
+
+  lastlink = 0;
+  count = lose = skip = add_current = 0;
+
+  firstmalloc = 0;
+  nalloca = 0;
+
+  name_vector = NULL;
+
+/*itrace("glob_vector: pat = `%s' dir = `%s' flags = 0x%x", pat, dir, flags);*/
+  /* If PAT is empty, skip the loop, but return one (empty) filename. */
+  if (pat == 0 || *pat == '\0')
+    {
+      if (glob_testdir (dir, 0) < 0)
+	return ((char **) &glob_error_return);
+
+      nextlink = (struct globval *)alloca (sizeof (struct globval));
+      if (nextlink == NULL)
+	return ((char **) NULL);
+
+      nextlink->next = (struct globval *)0;
+      nextname = (char *) malloc (1);
+      if (nextname == 0)
+	lose = 1;
+      else
+	{
+	  lastlink = nextlink;
+	  nextlink->name = nextname;
+	  nextname[0] = '\0';
+	  count = 1;
+	}
+
+      skip = 1;
+    }
+
+  patlen = (pat && *pat) ? strlen (pat) : 0;
+
+  /* If the filename pattern (PAT) does not contain any globbing characters,
+     or contains a pattern with only backslash escapes (hasglob == 2),
+     we can dispense with reading the directory, and just see if there is
+     a filename `DIR/PAT'.  If there is, and we can access it, just make the
+     vector to return and bail immediately. */
+  hasglob = 0;
+  if (skip == 0 && ((hasglob = glob_pattern_p (pat)) == 0 || hasglob == 2))
+    {
+      int dirlen;
+      struct stat finfo;
+
+      if (glob_testdir (dir, 0) < 0)
+	return ((char **) &glob_error_return);
+
+      dirlen = strlen (dir);
+      nextname = (char *)malloc (dirlen + patlen + 2);
+      npat = (char *)malloc (patlen + 1);
+      if (nextname == 0 || npat == 0)
+	{
+	  FREE (nextname);
+	  FREE (npat);
+	  lose = 1;
+	}
+      else
+	{
+	  strcpy (npat, pat);
+	  dequote_pathname (npat);
+
+	  strcpy (nextname, dir);
+	  nextname[dirlen++] = '/';
+	  strcpy (nextname + dirlen, npat);
+
+	  if (GLOB_TESTNAME (nextname) >= 0)
+	    {
+	      free (nextname);
+	      nextlink = (struct globval *)alloca (sizeof (struct globval));
+	      if (nextlink)
+		{
+		  nextlink->next = (struct globval *)0;
+		  lastlink = nextlink;
+		  nextlink->name = npat;
+		  count = 1;
+		}
+	      else
+		{
+		  free (npat);
+		  lose = 1;
+		}
+	    }
+	  else
+	    {
+	      free (nextname);
+	      free (npat);
+	    }
+	}
+
+      skip = 1;
+    }
+
+  if (skip == 0)
+    {
+      /* Open the directory, punting immediately if we cannot.  If opendir
+	 is not robust (i.e., it opens non-directories successfully), test
+	 that DIR is a directory and punt if it's not. */
+#if defined (OPENDIR_NOT_ROBUST)
+      if (glob_testdir (dir, 0) < 0)
+	return ((char **) &glob_error_return);
+#endif
+
+      d = opendir (dir);
+      if (d == NULL)
+	return ((char **) &glob_error_return);
+
+      /* Compute the flags that will be passed to strmatch().  We don't
+	 need to do this every time through the loop. */
+      mflags = (noglob_dot_filenames ? FNM_PERIOD : 0) | FNM_PATHNAME;
+
+#ifdef FNM_CASEFOLD
+      if (glob_ignore_case)
+	mflags |= FNM_CASEFOLD;
+#endif
+
+      if (extended_glob)
+	mflags |= FNM_EXTMATCH;
+
+      add_current = ((flags & (GX_ALLDIRS|GX_ADDCURDIR)) == (GX_ALLDIRS|GX_ADDCURDIR));
+
+      /* Scan the directory, finding all names that match.
+	 For each name that matches, allocate a struct globval
+	 on the stack and store the name in it.
+	 Chain those structs together; lastlink is the front of the chain.  */
+      while (1)
+	{
+	  /* Make globbing interruptible in the shell. */
+	  if (interrupt_state || terminating_signal)
+	    {
+	      lose = 1;
+	      break;
+	    }
+	  else if (signal_is_pending (SIGINT))	/* XXX - make SIGINT traps responsive */
+	    {
+	      lose = 1;
+	      break;
+	    }
+
+	  dp = readdir (d);
+	  if (dp == NULL)
+	    break;
+
+	  /* If this directory entry is not to be used, try again. */
+	  if (REAL_DIR_ENTRY (dp) == 0)
+	    continue;
+
+#if 0
+	  if (dp->d_name == 0 || *dp->d_name == 0)
+	    continue;
+#endif
+
+#if HANDLE_MULTIBYTE
+	  if (MB_CUR_MAX > 1 && mbskipname (pat, dp->d_name, flags))
+	    continue;
+	  else
+#endif
+	  if (skipname (pat, dp->d_name, flags))
+	    continue;
+
+	  /* If we're only interested in directories, don't bother with files */
+	  if (flags & (GX_MATCHDIRS|GX_ALLDIRS))
+	    {
+	      pflags = (flags & GX_ALLDIRS) ? MP_RMDOT : 0;
+	      if (flags & GX_NULLDIR)
+		pflags |= MP_IGNDOT;
+	      subdir = sh_makepath (dir, dp->d_name, pflags);
+	      isdir = glob_testdir (subdir, flags);
+	      if (isdir < 0 && (flags & GX_MATCHDIRS))
+		{
+		  free (subdir);
+		  continue;
+		}
+	    }
+
+	  if (flags & GX_ALLDIRS)
+	    {
+	      if (isdir == 0)
+		{
+		  dirlist = finddirs (pat, subdir, (flags & ~GX_ADDCURDIR), &e, &ndirs);
+		  if (dirlist == &finddirs_error_return)
+		    {
+		      free (subdir);
+		      lose = 1;
+		      break;
+		    }
+		  if (ndirs)		/* add recursive directories to list */
+		    {
+		      if (firstmalloc == 0)
+		        firstmalloc = e;
+		      e->next = lastlink;
+		      lastlink = dirlist;
+		      count += ndirs;
+		    }
+		}
+
+	      /* XXX - should we even add this if it's not a directory? */
+	      nextlink = (struct globval *) malloc (sizeof (struct globval));
+	      if (firstmalloc == 0)
+		firstmalloc = nextlink;
+	      sdlen = strlen (subdir);
+	      nextname = (char *) malloc (sdlen + 1);
+	      if (nextlink == 0 || nextname == 0)
+		{
+		  FREE (nextlink);
+		  FREE (nextname);
+		  free (subdir);
+		  lose = 1;
+		  break;
+		}
+	      nextlink->next = lastlink;
+	      lastlink = nextlink;
+	      nextlink->name = nextname;
+	      bcopy (subdir, nextname, sdlen + 1);
+	      free (subdir);
+	      ++count;
+	      continue;
+	    }
+	  else if (flags & GX_MATCHDIRS)
+	    free (subdir);
+
+	  convfn = fnx_fromfs (dp->d_name, D_NAMLEN (dp));
+	  if (strmatch (pat, convfn, mflags) != FNM_NOMATCH)
+	    {
+	      if (nalloca < ALLOCA_MAX)
+		{
+		  nextlink = (struct globval *) alloca (sizeof (struct globval));
+		  nalloca += sizeof (struct globval);
+		}
+	      else
+		{
+		  nextlink = (struct globval *) malloc (sizeof (struct globval));
+		  if (firstmalloc == 0)
+		    firstmalloc = nextlink;
+		}
+
+	      nextname = (char *) malloc (D_NAMLEN (dp) + 1);
+	      if (nextlink == 0 || nextname == 0)
+		{
+		  FREE (nextlink);
+		  FREE (nextname);
+		  lose = 1;
+		  break;
+		}
+	      nextlink->next = lastlink;
+	      lastlink = nextlink;
+	      nextlink->name = nextname;
+	      bcopy (dp->d_name, nextname, D_NAMLEN (dp) + 1);
+	      ++count;
+	    }
+	}
+
+      (void) closedir (d);
+    }
+
+  /* compat: if GX_ADDCURDIR, add the passed directory also.  Add an empty
+     directory name as a placeholder if GX_NULLDIR (in which case the passed
+     directory name is "."). */
+  if (add_current)
+    {
+      sdlen = strlen (dir);
+      nextname = (char *)malloc (sdlen + 1);
+      nextlink = (struct globval *) malloc (sizeof (struct globval));
+      if (nextlink == 0 || nextname == 0)
+	{
+	  FREE (nextlink);
+	  FREE (nextname);
+	  lose = 1;
+	}
+      else
+	{
+	  nextlink->name = nextname;
+	  nextlink->next = lastlink;
+	  lastlink = nextlink;
+	  if (flags & GX_NULLDIR)
+	    nextname[0] = '\0';
+	  else
+	    bcopy (dir, nextname, sdlen + 1);
+	  ++count;
+	}
+    }
+
+  if (lose == 0)
+    {
+      name_vector = (char **) malloc ((count + 1) * sizeof (char *));
+      lose |= name_vector == NULL;
+    }
+
+  /* Have we run out of memory?	 */
+  if (lose)
+    {
+      tmplink = 0;
+
+      /* Here free the strings we have got.  */
+      while (lastlink)
+	{
+	  /* Since we build the list in reverse order, the first N entries
+	     will be allocated with malloc, if firstmalloc is set, from
+	     lastlink to firstmalloc. */
+	  if (firstmalloc)
+	    {
+	      if (lastlink == firstmalloc)
+		firstmalloc = 0;
+	      tmplink = lastlink;
+	    }
+	  else
+	    tmplink = 0;
+	  free (lastlink->name);
+	  lastlink = lastlink->next;
+	  FREE (tmplink);
+	}
+
+      /* Don't call QUIT; here; let higher layers deal with it. */
+
+      return ((char **)NULL);
+    }
+
+  /* Copy the name pointers from the linked list into the vector.  */
+  for (tmplink = lastlink, i = 0; i < count; ++i)
+    {
+      name_vector[i] = tmplink->name;
+      tmplink = tmplink->next;
+    }
+
+  name_vector[count] = NULL;
+
+  /* If we allocated some of the struct globvals, free them now. */
+  if (firstmalloc)
+    {
+      tmplink = 0;
+      while (lastlink)
+	{
+	  tmplink = lastlink;
+	  if (lastlink == firstmalloc)
+	    lastlink = firstmalloc = 0;
+	  else
+	    lastlink = lastlink->next;
+	  free (tmplink);
+	}
+    }
+
+  return (name_vector);
+}
+
+/* Return a new array which is the concatenation of each string in ARRAY
+   to DIR.  This function expects you to pass in an allocated ARRAY, and
+   it takes care of free()ing that array.  Thus, you might think of this
+   function as side-effecting ARRAY.  This should handle GX_MARKDIRS. */
+static char **
+glob_dir_to_array (dir, array, flags)
+     char *dir, **array;
+     int flags;
+{
+  register unsigned int i, l;
+  int add_slash;
+  char **result, *new;
+  struct stat sb;
+
+  l = strlen (dir);
+  if (l == 0)
+    {
+      if (flags & GX_MARKDIRS)
+	for (i = 0; array[i]; i++)
+	  {
+	    if ((stat (array[i], &sb) == 0) && S_ISDIR (sb.st_mode))
+	      {
+		l = strlen (array[i]);
+		new = (char *)realloc (array[i], l + 2);
+		if (new == 0)
+		  return NULL;
+		new[l] = '/';
+		new[l+1] = '\0';
+		array[i] = new;
+	      }
+	  }
+      return (array);
+    }
+
+  add_slash = dir[l - 1] != '/';
+
+  i = 0;
+  while (array[i] != NULL)
+    ++i;
+
+  result = (char **) malloc ((i + 1) * sizeof (char *));
+  if (result == NULL)
+    return (NULL);
+
+  for (i = 0; array[i] != NULL; i++)
+    {
+      /* 3 == 1 for NUL, 1 for slash at end of DIR, 1 for GX_MARKDIRS */
+      result[i] = (char *) malloc (l + strlen (array[i]) + 3);
+
+      if (result[i] == NULL)
+	{
+	  int ind;
+	  for (ind = 0; ind < i; ind++)
+	    free (result[ind]);
+	  free (result);
+	  return (NULL);
+	}
+
+      strcpy (result[i], dir);
+      if (add_slash)
+	result[i][l] = '/';
+      if (array[i][0])
+	{
+	  strcpy (result[i] + l + add_slash, array[i]);
+	  if (flags & GX_MARKDIRS)
+	    {
+	      if ((stat (result[i], &sb) == 0) && S_ISDIR (sb.st_mode))
+		{
+		  size_t rlen;
+		  rlen = strlen (result[i]);
+		  result[i][rlen] = '/';
+		  result[i][rlen+1] = '\0';
+		}
+	    }
+	}
+      else
+        result[i][l+add_slash] = '\0';
+    }
+  result[i] = NULL;
+
+  /* Free the input array.  */
+  for (i = 0; array[i] != NULL; i++)
+    free (array[i]);
+  free ((char *) array);
+
+  return (result);
+}
+
+/* Do globbing on PATHNAME.  Return an array of pathnames that match,
+   marking the end of the array with a null-pointer as an element.
+   If no pathnames match, then the array is empty (first element is null).
+   If there isn't enough memory, then return NULL.
+   If a file system error occurs, return -1; `errno' has the error code.  */
+char **
+glob_filename (pathname, flags)
+     char *pathname;
+     int flags;
+{
+  char **result, **new_result;
+  unsigned int result_size;
+  char *directory_name, *filename, *dname, *fn;
+  unsigned int directory_len;
+  int free_dirname;			/* flag */
+  int dflags, hasglob;
+
+  result = (char **) malloc (sizeof (char *));
+  result_size = 1;
+  if (result == NULL)
+    return (NULL);
+
+  result[0] = NULL;
+
+  directory_name = NULL;
+
+  /* Find the filename.  */
+  filename = strrchr (pathname, '/');
+#if defined (EXTENDED_GLOB)
+  if (filename && extended_glob)
+    {
+      fn = glob_dirscan (pathname, '/');
+#if DEBUG_MATCHING
+      if (fn != filename)
+	fprintf (stderr, "glob_filename: glob_dirscan: fn (%s) != filename (%s)\n", fn ? fn : "(null)", filename);
+#endif
+      filename = fn;
+    }
+#endif
+
+  if (filename == NULL)
+    {
+      filename = pathname;
+      directory_name = "";
+      directory_len = 0;
+      free_dirname = 0;
+    }
+  else
+    {
+      directory_len = (filename - pathname) + 1;
+      directory_name = (char *) malloc (directory_len + 1);
+
+      if (directory_name == 0)		/* allocation failed? */
+	{
+	  free (result);
+	  return (NULL);
+	}
+
+      bcopy (pathname, directory_name, directory_len);
+      directory_name[directory_len] = '\0';
+      ++filename;
+      free_dirname = 1;
+    }
+
+  hasglob = 0;
+  /* If directory_name contains globbing characters, then we
+     have to expand the previous levels.  Just recurse.
+     If glob_pattern_p returns != [0,1] we have a pattern that has backslash
+     quotes but no unquoted glob pattern characters. We dequote it below. */
+  if (directory_len > 0 && (hasglob = glob_pattern_p (directory_name)) == 1)
+    {
+      char **directories, *d, *p;
+      register unsigned int i;
+      int all_starstar, last_starstar;
+
+      all_starstar = last_starstar = 0;
+      d = directory_name;
+      dflags = flags & ~GX_MARKDIRS;
+      /* Collapse a sequence of ** patterns separated by one or more slashes
+	 to a single ** terminated by a slash or NUL */
+      if ((flags & GX_GLOBSTAR) && d[0] == '*' && d[1] == '*' && (d[2] == '/' || d[2] == '\0'))
+	{
+	  p = d;
+	  while (d[0] == '*' && d[1] == '*' && (d[2] == '/' || d[2] == '\0'))
+	    {
+	      p = d;
+	      if (d[2])
+		{
+		  d += 3;
+		  while (*d == '/')
+		    d++;
+		  if (*d == 0)
+		    break;
+		}
+	    }
+	  if (*d == 0)
+	    all_starstar = 1;
+	  d = p;
+	  dflags |= GX_ALLDIRS|GX_ADDCURDIR;
+	  directory_len = strlen (d);
+	}
+
+      /* If there is a non [star][star]/ component in directory_name, we
+	 still need to collapse trailing sequences of [star][star]/ into
+	 a single one and note that the directory name ends with [star][star],
+	 so we can compensate if filename is [star][star] */
+      if ((flags & GX_GLOBSTAR) && all_starstar == 0)
+	{
+	  int dl, prev;
+	  prev = dl = directory_len;
+	  while (dl >= 4 && d[dl - 1] == '/' &&
+			   d[dl - 2] == '*' &&
+			   d[dl - 3] == '*' &&
+			   d[dl - 4] == '/')
+	    prev = dl, dl -= 3;
+	  if (dl != directory_len)
+	    last_starstar = 1;
+	  directory_len = prev;
+	}
+
+      /* If the directory name ends in [star][star]/ but the filename is
+	 [star][star], just remove the final [star][star] from the directory
+	 so we don't have to scan everything twice. */
+      if (last_starstar && directory_len > 4 &&
+	    filename[0] == '*' && filename[1] == '*' && filename[2] == 0)
+	{
+	  directory_len -= 3;
+	}
+
+      if (d[directory_len - 1] == '/')
+	d[directory_len - 1] = '\0';
+
+      directories = glob_filename (d, dflags|GX_RECURSE);
+
+      if (free_dirname)
+	{
+	  free (directory_name);
+	  directory_name = NULL;
+	}
+
+      if (directories == NULL)
+	goto memory_error;
+      else if (directories == (char **)&glob_error_return)
+	{
+	  free ((char *) result);
+	  return ((char **) &glob_error_return);
+	}
+      else if (*directories == NULL)
+	{
+	  free ((char *) directories);
+	  free ((char *) result);
+	  return ((char **) &glob_error_return);
+	}
+
+      /* If we have something like [star][star]/[star][star], it's no use to
+         glob **, then do it again, and throw half the results away.  */
+      if (all_starstar && filename[0] == '*' && filename[1] == '*' && filename[2] == 0)
+	{
+	  free ((char *) directories);
+	  free (directory_name);
+	  directory_name = NULL;
+	  directory_len = 0;
+	  goto only_filename;
+	}
+
+      /* We have successfully globbed the preceding directory name.
+	 For each name in DIRECTORIES, call glob_vector on it and
+	 FILENAME.  Concatenate the results together.  */
+      for (i = 0; directories[i] != NULL; ++i)
+	{
+	  char **temp_results;
+	  int shouldbreak;
+
+	  shouldbreak = 0;
+	  /* XXX -- we've recursively scanned any directories resulting from
+	     a `**', so turn off the flag.  We turn it on again below if
+	     filename is `**' */
+	  /* Scan directory even on a NULL filename.  That way, `*h/'
+	     returns only directories ending in `h', instead of all
+	     files ending in `h' with a `/' appended. */
+	  dname = directories[i];
+	  dflags = flags & ~(GX_MARKDIRS|GX_ALLDIRS|GX_ADDCURDIR);
+	  /* last_starstar? */
+	  if ((flags & GX_GLOBSTAR) && filename[0] == '*' && filename[1] == '*' && filename[2] == '\0')
+	    dflags |= GX_ALLDIRS|GX_ADDCURDIR;
+	  if (dname[0] == '\0' && filename[0])
+	    {
+	      dflags |= GX_NULLDIR;
+	      dname = ".";	/* treat null directory name and non-null filename as current directory */
+	    }
+
+	  /* Special handling for symlinks to directories with globstar on */
+	  if (all_starstar && (dflags & GX_NULLDIR) == 0)
+	    {
+	      int dlen;
+
+	      /* If we have a directory name that is not null (GX_NULLDIR above)
+		 and is a symlink to a directory, we return the symlink if
+		 we're not `descending' into it (filename[0] == 0) and return
+		 glob_error_return (which causes the code below to skip the
+		 name) otherwise. I should fold this into a test that does both
+		 checks instead of calling stat twice. */
+	      if (glob_testdir (dname, flags|GX_ALLDIRS) == -2 && glob_testdir (dname, 0) == 0)
+		{
+		  if (filename[0] != 0)
+		    temp_results = (char **)&glob_error_return;		/* skip */
+		  else
+		    {
+		      /* Construct array to pass to glob_dir_to_array */
+		      temp_results = (char **)malloc (2 * sizeof (char *));
+		      if (temp_results == NULL)
+			goto memory_error;
+		      temp_results[0] = (char *)malloc (1);
+		      if (temp_results[0] == 0)
+			{
+			  free (temp_results);
+			  goto memory_error;
+			}
+		      **temp_results = '\0';
+		      temp_results[1] = NULL;
+		      dflags |= GX_SYMLINK;	/* mostly for debugging */
+		    }
+		}
+	      else
+		temp_results = glob_vector (filename, dname, dflags);
+	    }
+	  else
+	    temp_results = glob_vector (filename, dname, dflags);
+
+	  /* Handle error cases. */
+	  if (temp_results == NULL)
+	    goto memory_error;
+	  else if (temp_results == (char **)&glob_error_return)
+	    /* This filename is probably not a directory.  Ignore it.  */
+	    ;
+	  else
+	    {
+	      char **array;
+	      register unsigned int l;
+
+	      /* If we're expanding **, we don't need to glue the directory
+		 name to the results; we've already done it in glob_vector */
+	      if ((dflags & GX_ALLDIRS) && filename[0] == '*' && filename[1] == '*' && (filename[2] == '\0' || filename[2] == '/'))
+		{
+		  /* When do we remove null elements from temp_results?  And
+		     how to avoid duplicate elements in the final result? */
+		  /* If (dflags & GX_NULLDIR) glob_filename potentially left a
+		     NULL placeholder in the temp results just in case
+		     glob_vector/glob_dir_to_array did something with it, but
+		     if it didn't, and we're not supposed to be passing them
+		     through for some reason ((flags & GX_NULLDIR) == 0) we
+		     need to remove all the NULL elements from the beginning
+		     of TEMP_RESULTS. */
+		  /* If we have a null directory name and ** as the filename,
+		     we have just searched for everything from the current
+		     directory on down. Break now (shouldbreak = 1) to avoid
+		     duplicate entries in the final result. */
+#define NULL_PLACEHOLDER(x)	((x) && *(x) && **(x) == 0)
+		  if ((dflags & GX_NULLDIR) && (flags & GX_NULLDIR) == 0 &&
+			NULL_PLACEHOLDER (temp_results))
+#undef NULL_PLACEHOLDER
+		    {
+		      register int i, n;
+		      for (n = 0; temp_results[n] && *temp_results[n] == 0; n++)
+			;
+		      i = n;
+		      do
+			temp_results[i - n] = temp_results[i];
+		      while (temp_results[i++] != 0);
+		      array = temp_results;
+		      shouldbreak = 1;
+		    }
+	          else
+		    array = temp_results;
+		}
+	      else if (dflags & GX_SYMLINK)
+		array = glob_dir_to_array (directories[i], temp_results, flags);
+	      else
+		array = glob_dir_to_array (directories[i], temp_results, flags);
+	      l = 0;
+	      while (array[l] != NULL)
+		++l;
+
+	      new_result = (char **)realloc (result, (result_size + l) * sizeof (char *));
+
+	      if (new_result == NULL)
+		{
+		  for (l = 0; array[l]; ++l)
+		    free (array[l]);
+		  free ((char *)array);
+		  goto memory_error;
+		}
+	      result = new_result;
+
+	      for (l = 0; array[l] != NULL; ++l)
+		result[result_size++ - 1] = array[l];
+
+	      result[result_size - 1] = NULL;
+
+	      /* Note that the elements of ARRAY are not freed.  */
+	      if (array != temp_results)
+		free ((char *) array);
+	      else if ((dflags & GX_ALLDIRS) && filename[0] == '*' && filename[1] == '*' && filename[2] == '\0')
+		free (temp_results);	/* expanding ** case above */
+
+	      if (shouldbreak)
+		break;
+	    }
+	}
+      /* Free the directories.  */
+      for (i = 0; directories[i]; i++)
+	free (directories[i]);
+
+      free ((char *) directories);
+
+      return (result);
+    }
+
+only_filename:
+  /* If there is only a directory name, return it. */
+  if (*filename == '\0')
+    {
+      result = (char **) realloc ((char *) result, 2 * sizeof (char *));
+      if (result == NULL)
+	{
+	  if (free_dirname)
+	    free (directory_name);
+	  return (NULL);
+	}
+      /* If we have a directory name with quoted characters, and we are
+	 being called recursively to glob the directory portion of a pathname,
+	 we need to dequote the directory name before returning it so the
+	 caller can read the directory */
+      if (directory_len > 0 && hasglob == 2 && (flags & GX_RECURSE) != 0)
+	{
+	  dequote_pathname (directory_name);
+	  directory_len = strlen (directory_name);
+	}
+
+      /* We could check whether or not the dequoted directory_name is a
+	 directory and return it here, returning the original directory_name
+	 if not, but we don't do that. We do return the dequoted directory
+	 name if we're not being called recursively and the dequoted name
+	 corresponds to an actual directory. For better backwards compatibility,
+	 we can return &glob_error_return unconditionally in this case. */
+
+      if (directory_len > 0 && hasglob == 2 && (flags & GX_RECURSE) == 0)
+	{
+	  dequote_pathname (directory_name);
+	  if (glob_testdir (directory_name, 0) < 0)
+	    {
+	      if (free_dirname)
+		free (directory_name);
+	      return ((char **)&glob_error_return);
+	    }
+	}
+
+      /* Handle GX_MARKDIRS here. */
+      result[0] = (char *) malloc (directory_len + 1);
+      if (result[0] == NULL)
+	goto memory_error;
+      bcopy (directory_name, result[0], directory_len + 1);
+      if (free_dirname)
+	free (directory_name);
+      result[1] = NULL;
+      return (result);
+    }
+  else
+    {
+      char **temp_results;
+
+      /* There are no unquoted globbing characters in DIRECTORY_NAME.
+	 Dequote it before we try to open the directory since there may
+	 be quoted globbing characters which should be treated verbatim. */
+      if (directory_len > 0)
+	dequote_pathname (directory_name);
+
+      /* We allocated a small array called RESULT, which we won't be using.
+	 Free that memory now. */
+      free (result);
+
+      /* Just return what glob_vector () returns appended to the
+	 directory name. */
+      /* If flags & GX_ALLDIRS, we're called recursively */
+      dflags = flags & ~GX_MARKDIRS;
+      if (directory_len == 0)
+	dflags |= GX_NULLDIR;
+      if ((flags & GX_GLOBSTAR) && filename[0] == '*' && filename[1] == '*' && filename[2] == '\0')
+	{
+	  dflags |= GX_ALLDIRS|GX_ADDCURDIR;
+#if 0
+	  /* If we want all directories (dflags & GX_ALLDIRS) and we're not
+	     being called recursively as something like `echo [star][star]/[star].o'
+	     ((flags & GX_ALLDIRS) == 0), we want to prevent glob_vector from
+	     adding a null directory name to the front of the temp_results
+	     array.  We turn off ADDCURDIR if not called recursively and
+	     dlen == 0 */
+#endif
+	  if (directory_len == 0 && (flags & GX_ALLDIRS) == 0)
+	    dflags &= ~GX_ADDCURDIR;
+	}
+      temp_results = glob_vector (filename,
+				  (directory_len == 0 ? "." : directory_name),
+				  dflags);
+
+      if (temp_results == NULL || temp_results == (char **)&glob_error_return)
+	{
+	  if (free_dirname)
+	    free (directory_name);
+	  QUIT;			/* XXX - shell */
+	  run_pending_traps ();
+	  return (temp_results);
+	}
+
+      result = glob_dir_to_array ((dflags & GX_ALLDIRS) ? "" : directory_name, temp_results, flags);
+
+      if (free_dirname)
+	free (directory_name);
+      return (result);
+    }
+
+  /* We get to memory_error if the program has run out of memory, or
+     if this is the shell, and we have been interrupted. */
+ memory_error:
+  if (result != NULL)
+    {
+      register unsigned int i;
+      for (i = 0; result[i] != NULL; ++i)
+	free (result[i]);
+      free ((char *) result);
+    }
+
+  if (free_dirname && directory_name)
+    free (directory_name);
+
+  QUIT;
+  run_pending_traps ();
+
+  return (NULL);
+}
+
+#if defined (TEST)
+
+main (argc, argv)
+     int argc;
+     char **argv;
+{
+  unsigned int i;
+
+  for (i = 1; i < argc; ++i)
+    {
+      char **value = glob_filename (argv[i], 0);
+      if (value == NULL)
+	puts ("Out of memory.");
+      else if (value == &glob_error_return)
+	perror (argv[i]);
+      else
+	for (i = 0; value[i] != NULL; i++)
+	  puts (value[i]);
+    }
+
+  exit (0);
+}
+#endif	/* TEST.  */
diff --git a/lib/glob/glob.h b/lib/glob/glob.h
new file mode 100644
index 0000000..ca3a66c
--- /dev/null
+++ b/lib/glob/glob.h
@@ -0,0 +1,46 @@
+/* File-name wildcard pattern matching for GNU.
+   Copyright (C) 1985-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne-Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef	_GLOB_H_
+#define	_GLOB_H_
+
+#include "stdc.h"
+
+#define GX_MARKDIRS	0x001	/* mark directory names with trailing `/' */
+#define GX_NOCASE	0x002	/* ignore case */
+#define GX_MATCHDOT	0x004	/* match `.' literally */
+#define GX_MATCHDIRS	0x008	/* match only directory names */
+#define GX_ALLDIRS	0x010	/* match all directory names, no others */
+#define GX_NULLDIR	0x100	/* internal -- no directory preceding pattern */
+#define GX_ADDCURDIR	0x200	/* internal -- add passed directory name */
+#define GX_GLOBSTAR	0x400	/* turn on special handling of ** */
+#define GX_RECURSE	0x800	/* internal -- glob_filename called recursively */
+#define GX_SYMLINK	0x1000	/* internal -- symlink to a directory */
+
+extern int glob_pattern_p PARAMS((const char *));
+extern char **glob_vector PARAMS((char *, char *, int));
+extern char **glob_filename PARAMS((char *, int));
+
+extern int extglob_pattern_p PARAMS((const char *));
+
+extern char *glob_error_return;
+extern int noglob_dot_filenames;
+extern int glob_ignore_case;
+
+#endif /* _GLOB_H_ */
diff --git a/lib/glob/glob_loop.c b/lib/glob/glob_loop.c
new file mode 100644
index 0000000..467e7ae
--- /dev/null
+++ b/lib/glob/glob_loop.c
@@ -0,0 +1,84 @@
+/* Copyright (C) 1991-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+   
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+static int INTERNAL_GLOB_PATTERN_P PARAMS((const GCHAR *));
+
+/* Return nonzero if PATTERN has any special globbing chars in it.
+   Compiled twice, once each for single-byte and multibyte characters. */
+static int
+INTERNAL_GLOB_PATTERN_P (pattern)
+     const GCHAR *pattern;
+{
+  register const GCHAR *p;
+  register GCHAR c;
+  int bopen, bsquote;
+
+  p = pattern;
+  bopen = bsquote = 0;
+
+  while ((c = *p++) != L('\0'))
+    switch (c)
+      {
+      case L('?'):
+      case L('*'):
+	return 1;
+
+      case L('['):      /* Only accept an open brace if there is a close */
+	bopen++;        /* brace to match it.  Bracket expressions must be */
+	continue;       /* complete, according to Posix.2 */
+      case L(']'):
+	if (bopen)
+	  return 1;
+	continue;
+
+      case L('+'):         /* extended matching operators */
+      case L('@'):
+      case L('!'):
+	if (*p == L('('))  /*) */
+	  return 1;
+	continue;
+
+      case L('\\'):
+	/* Don't let the pattern end in a backslash (GMATCH returns no match
+	   if the pattern ends in a backslash anyway), but otherwise note that 
+	   we have seen this, since the matching engine uses backslash as an
+	   escape character and it can be removed. We return 2 later if we
+	   have seen only backslash-escaped characters, so interested callers
+	   know they can shortcut and just dequote the pathname. */
+	if (*p != L('\0'))
+	  {
+	    p++;
+	    bsquote = 1;
+	    continue;
+	  }
+	else 	/* (*p == L('\0')) */
+	  return 0;
+      }
+
+#if 0
+  return bsquote ? 2 : 0;
+#else
+  return (0);
+#endif
+}
+
+#undef INTERNAL_GLOB_PATTERN_P
+#undef L
+#undef INT
+#undef CHAR
+#undef GCHAR
diff --git a/lib/glob/gm_loop.c b/lib/glob/gm_loop.c
new file mode 100644
index 0000000..ac516f8
--- /dev/null
+++ b/lib/glob/gm_loop.c
@@ -0,0 +1,208 @@
+/* Copyright (C) 1991-2017 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+   
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if EXTENDED_GLOB
+int
+EXTGLOB_PATTERN_P (pat)
+     const CHAR *pat;
+{
+  switch (pat[0])
+    {
+    case L('*'):
+    case L('+'):
+    case L('!'):
+    case L('@'):
+    case L('?'):
+      return (pat[1] == L('('));	/* ) */
+    default:
+      return 0;
+    }
+    
+  return 0;
+}
+#endif
+
+/* Return 1 of the first character of STRING could match the first
+   character of pattern PAT.  Compiled to both single and wiide character
+   versions.  FLAGS is a subset of strmatch flags; used to do case-insensitive
+   matching for now. */
+int
+MATCH_PATTERN_CHAR (pat, string, flags)
+     CHAR *pat, *string;
+     int flags;
+{
+  CHAR c;
+
+  if (*string == 0)
+    return (*pat == L('*'));	/* XXX  - allow only * to match empty string */
+
+  switch (c = *pat++)
+    {
+    default:
+      return (FOLD(*string) == FOLD(c));
+    case L('\\'):
+      return (FOLD(*string) == FOLD(*pat));
+    case L('?'):
+      return (*pat == L('(') ? 1 : (*string != L'\0'));
+    case L('*'):
+      return (1);
+    case L('+'):
+    case L('!'):
+    case L('@'):
+      return (*pat ==  L('(') ? 1 : (FOLD(*string) == FOLD(c)));
+    case L('['):
+      return (*string != L('\0'));
+    }
+}
+
+int
+MATCHLEN (pat, max)
+     CHAR *pat;
+     size_t max;
+{
+  CHAR c;
+  int matlen, bracklen, t, in_cclass, in_collsym, in_equiv;
+
+  if (*pat == 0)
+    return (0);
+
+  matlen = in_cclass = in_collsym = in_equiv = 0;
+  while (c = *pat++)
+    {
+      switch (c)
+	{
+	default:
+	  matlen++;
+	  break;
+	case L('\\'):
+	  if (*pat == 0)
+	    return ++matlen;
+	  else
+	    {
+	      matlen++;
+	      pat++;
+	    }
+	  break;
+	case L('?'):
+	  if (*pat == LPAREN)
+	    return (matlen = -1);		/* XXX for now */
+	  else
+	    matlen++;
+	  break;
+	case L('*'):
+	  return (matlen = -1);
+	case L('+'):
+	case L('!'):
+	case L('@'):
+	  if (*pat == LPAREN)
+	    return (matlen = -1);		/* XXX for now */
+	  else
+	    matlen++;
+	  break;
+	case L('['):
+	  /* scan for ending `]', skipping over embedded [:...:] */
+	  bracklen = 1;
+	  c = *pat++;
+	  do
+	    {
+	      if (c == 0)
+		{
+		  pat--;			/* back up to NUL */
+	          matlen += bracklen;
+	          goto bad_bracket;
+	        }
+	      else if (c == L('\\'))
+		{
+		  /* *pat == backslash-escaped character */
+		  bracklen++;
+		  /* If the backslash or backslash-escape ends the string,
+		     bail.  The ++pat skips over the backslash escape */
+		  if (*pat == 0 || *++pat == 0)
+		    {
+		      matlen += bracklen;
+		      goto bad_bracket;
+		    }
+		}
+	      else if (c == L('[') && *pat == L(':'))	/* character class */
+		{
+		  pat++;
+		  bracklen++;
+		  in_cclass = 1;
+		}
+	      else if (in_cclass && c == L(':') && *pat == L(']'))
+		{
+		  pat++;
+		  bracklen++;
+		  in_cclass = 0;
+		}
+	      else if (c == L('[') && *pat == L('.'))	/* collating symbol */
+		{
+		  pat++;
+		  bracklen++;
+		  if (*pat == L(']'))	/* right bracket can appear as collating symbol */
+		    {
+		      pat++;
+		      bracklen++;
+		    }
+		  in_collsym = 1;
+		}
+	      else if (in_collsym && c == L('.') && *pat == L(']'))
+		{
+		  pat++;
+		  bracklen++;
+		  in_collsym = 0;
+		}
+	      else if (c == L('[') && *pat == L('='))	/* equivalence class */
+		{
+		  pat++;
+		  bracklen++;
+		  if (*pat == L(']'))	/* right bracket can appear as equivalence class */
+		    {
+		      pat++;
+		      bracklen++;
+		    }
+		  in_equiv = 1;
+		}
+	      else if (in_equiv && c == L('=') && *pat == L(']'))
+		{
+		  pat++;
+		  bracklen++;
+		  in_equiv = 0;
+		}
+	      else
+		bracklen++;
+	    }
+	  while ((c = *pat++) != L(']'));
+	  matlen++;		/* bracket expression can only match one char */
+bad_bracket:
+	  break;
+	}
+    }
+
+  return matlen;
+}
+
+#undef EXTGLOB_PATTERN_P
+#undef MATCH_PATTERN_CHAR
+#undef MATCHLEN
+#undef FOLD
+#undef L
+#undef LPAREN
+#undef RPAREN
+#undef INT
+#undef CHAR
diff --git a/lib/glob/gmisc.c b/lib/glob/gmisc.c
new file mode 100644
index 0000000..f3d74ce
--- /dev/null
+++ b/lib/glob/gmisc.c
@@ -0,0 +1,108 @@
+/* gmisc.c -- miscellaneous pattern matching utility functions for Bash.
+
+   Copyright (C) 2010-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne-Again SHell.
+   
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#include "bashtypes.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "bashansi.h"
+#include "shmbutil.h"
+#include "chartypes.h"
+
+#include "stdc.h"
+
+#ifndef FNM_CASEFOLD
+#  include "strmatch.h"
+#endif
+#include "glob.h"
+
+/* Make sure these names continue to agree with what's in smatch.c */
+extern char *glob_patscan PARAMS((char *, char *, int));
+
+/* Compile `gm_loop.c' for single-byte characters. */
+#define CHAR	char
+#define INT	int
+#define L(CS)	CS
+#define EXTGLOB_PATTERN_P extglob_pattern_p
+#define MATCH_PATTERN_CHAR match_pattern_char
+#define MATCHLEN umatchlen
+#define FOLD(c) ((flags & FNM_CASEFOLD) \
+	? TOLOWER ((unsigned char)c) \
+	: ((unsigned char)c))
+#ifndef LPAREN
+#define LPAREN '('
+#define RPAREN ')'
+#endif
+#include "gm_loop.c"
+
+/* Compile `gm_loop.c' again for multibyte characters. */
+#if HANDLE_MULTIBYTE
+
+#define CHAR	wchar_t
+#define INT	wint_t
+#define L(CS)	L##CS
+#define EXTGLOB_PATTERN_P wextglob_pattern_p
+#define MATCH_PATTERN_CHAR match_pattern_wchar
+#define MATCHLEN wmatchlen
+
+#define FOLD(c) ((flags & FNM_CASEFOLD) && iswupper (c) ? towlower (c) : (c))
+#define LPAREN L'('
+#define RPAREN L')'
+#include "gm_loop.c"
+
+#endif /* HANDLE_MULTIBYTE */
+
+
+#if defined (EXTENDED_GLOB)
+/* Skip characters in PAT and return the final occurrence of DIRSEP.  This
+   is only called when extended_glob is set, so we have to skip over extglob
+   patterns x(...) */
+char *
+glob_dirscan (pat, dirsep)
+     char *pat;
+     int dirsep;
+{
+  char *p, *d, *pe, *se;
+
+  d = pe = se = 0;
+  for (p = pat; p && *p; p++)
+    {
+      if (extglob_pattern_p (p))
+	{
+	  if (se == 0)
+	    se = p + strlen (p) - 1;
+	  pe = glob_patscan (p + 2, se, 0);
+	  if (pe == 0)
+	    continue;
+	  else if (*pe == 0)
+	    break;
+	  p = pe - 1;	/* will do increment above */
+	  continue;
+	}
+      if (*p ==  dirsep)
+	d = p;
+    }
+  return d;
+}
+#endif /* EXTENDED_GLOB */
diff --git a/lib/glob/ndir.h b/lib/glob/ndir.h
new file mode 100644
index 0000000..31261eb
--- /dev/null
+++ b/lib/glob/ndir.h
@@ -0,0 +1,50 @@
+/* <dir.h> -- definitions for 4.2BSD-compatible directory access.
+   last edit:	09-Jul-1983	D A Gwyn. */
+
+#if defined (VMS)
+#  if !defined (FAB$C_BID)
+#    include <fab.h>
+#  endif
+#  if !defined (NAM$C_BID)
+#    include <nam.h>
+#  endif
+#  if !defined (RMS$_SUC)
+#    include <rmsdef.h>
+#  endif
+#  include "dir.h"
+#endif /* VMS */
+
+/* Size of directory block. */
+#define DIRBLKSIZ 512
+
+/* NOTE:  MAXNAMLEN must be one less than a multiple of 4 */
+
+#if defined (VMS)
+#  define MAXNAMLEN (DIR$S_NAME + 7)	/* 80 plus room for version #.  */
+#  define MAXFULLSPEC NAM$C_MAXRSS	/* Maximum full spec */
+#else
+#  define MAXNAMLEN 15			/* Maximum filename length. */
+#endif /* VMS */
+
+/* Data from readdir (). */
+struct direct {
+  long d_ino;			/* Inode number of entry. */
+  unsigned short d_reclen;	/* Length of this record. */
+  unsigned short d_namlen;	/* Length of string in d_name. */
+  char d_name[MAXNAMLEN + 1];	/* Name of file. */
+};
+
+/* Stream data from opendir (). */
+typedef struct {
+  int dd_fd;			/* File descriptor. */
+  int dd_loc;			/* Offset in block. */
+  int dd_size;			/* Amount of valid data. */
+  char	dd_buf[DIRBLKSIZ];	/* Directory block. */
+} DIR;
+
+extern DIR *opendir ();
+extern struct direct *readdir ();
+extern long telldir ();
+extern void seekdir (), closedir ();
+
+#define rewinddir(dirp) seekdir (dirp, 0L)
diff --git a/lib/glob/sm_loop.c b/lib/glob/sm_loop.c
new file mode 100644
index 0000000..a98c14b
--- /dev/null
+++ b/lib/glob/sm_loop.c
@@ -0,0 +1,942 @@
+/* Copyright (C) 1991-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+   
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+struct STRUCT
+{
+  CHAR *pattern;
+  CHAR *string;
+};
+
+int FCT PARAMS((CHAR *, CHAR *, int));
+
+static int GMATCH PARAMS((CHAR *, CHAR *, CHAR *, CHAR *, struct STRUCT *, int));
+static CHAR *PARSE_COLLSYM PARAMS((CHAR *, INT *));
+static CHAR *BRACKMATCH PARAMS((CHAR *, U_CHAR, int));
+static int EXTMATCH PARAMS((INT, CHAR *, CHAR *, CHAR *, CHAR *, int));
+
+extern void DEQUOTE_PATHNAME PARAMS((CHAR *));
+
+/*static*/ CHAR *PATSCAN PARAMS((CHAR *, CHAR *, INT));
+
+int
+FCT (pattern, string, flags)
+     CHAR *pattern;
+     CHAR *string;
+     int flags;
+{
+  CHAR *se, *pe;
+
+  if (string == 0 || pattern == 0)
+    return FNM_NOMATCH;
+
+  se = string + STRLEN ((XCHAR *)string);
+  pe = pattern + STRLEN ((XCHAR *)pattern);
+
+  return (GMATCH (string, se, pattern, pe, (struct  STRUCT *)NULL, flags));
+}
+
+/* Match STRING against the filename pattern PATTERN, returning zero if
+   it matches, FNM_NOMATCH if not.  */
+static int
+GMATCH (string, se, pattern, pe, ends, flags)
+     CHAR *string, *se;
+     CHAR *pattern, *pe;
+     struct STRUCT *ends;
+     int flags;
+{
+  CHAR *p, *n;		/* pattern, string */
+  INT c;		/* current pattern character - XXX U_CHAR? */
+  INT sc;		/* current string character - XXX U_CHAR? */
+
+  p = pattern;
+  n = string;
+
+  if (string == 0 || pattern == 0)
+    return FNM_NOMATCH;
+
+#if DEBUG_MATCHING
+fprintf(stderr, "gmatch: string = %s; se = %s\n", string, se);
+fprintf(stderr, "gmatch: pattern = %s; pe = %s\n", pattern, pe);
+#endif
+
+  while (p < pe)
+    {
+      c = *p++;
+      c = FOLD (c);
+
+      sc = n < se ? *n : '\0';
+
+#ifdef EXTENDED_GLOB
+      /* EXTMATCH () will handle recursively calling GMATCH, so we can
+	 just return what EXTMATCH() returns. */
+      if ((flags & FNM_EXTMATCH) && *p == L('(') &&
+	  (c == L('+') || c == L('*') || c == L('?') || c == L('@') || c == L('!'))) /* ) */
+	{
+	  int lflags;
+	  /* If we're not matching the start of the string, we're not
+	     concerned about the special cases for matching `.' */
+	  lflags = (n == string) ? flags : (flags & ~FNM_PERIOD);
+	  return (EXTMATCH (c, n, se, p, pe, lflags));
+	}
+#endif /* EXTENDED_GLOB */
+
+      switch (c)
+	{
+	case L('?'):		/* Match single character */
+	  if (sc == '\0')
+	    return FNM_NOMATCH;
+	  else if ((flags & FNM_PATHNAME) && sc == L('/'))
+	    /* If we are matching a pathname, `?' can never match a `/'. */
+	    return FNM_NOMATCH;
+	  else if ((flags & FNM_PERIOD) && sc == L('.') &&
+		   (n == string || ((flags & FNM_PATHNAME) && n[-1] == L('/'))))
+	    /* `?' cannot match a `.' if it is the first character of the
+	       string or if it is the first character following a slash and
+	       we are matching a pathname. */
+	    return FNM_NOMATCH;
+	  break;
+
+	case L('\\'):		/* backslash escape removes special meaning */
+	  if (p == pe && sc == '\\' && (n+1 == se))
+	    break;
+
+	  if (p == pe)
+	    return FNM_NOMATCH;
+
+	  if ((flags & FNM_NOESCAPE) == 0)
+	    {
+	      c = *p++;
+	      /* A trailing `\' cannot match. */
+	      if (p > pe)
+		return FNM_NOMATCH;
+	      c = FOLD (c);
+	    }
+	  if (FOLD (sc) != (U_CHAR)c)
+	    return FNM_NOMATCH;
+	  break;
+
+	case L('*'):		/* Match zero or more characters */
+	  /* See below for the reason for using this. It avoids backtracking
+	     back to a previous `*'.  Picked up from glibc. */
+	  if (ends != NULL)
+	    {
+	      ends->pattern = p - 1;
+	      ends->string = n;
+	      return (0);
+	    }
+
+	  if ((flags & FNM_PERIOD) && sc == L('.') &&
+	      (n == string || ((flags & FNM_PATHNAME) && n[-1] == L('/'))))
+	    /* `*' cannot match a `.' if it is the first character of the
+	       string or if it is the first character following a slash and
+	       we are matching a pathname. */
+	    return FNM_NOMATCH;
+
+	  if (p == pe)
+	    return 0;
+
+	  /* Collapse multiple consecutive `*' and `?', but make sure that
+	     one character of the string is consumed for each `?'. */
+	  for (c = *p++; (c == L('?') || c == L('*')); c = *p++)
+	    {
+	      if ((flags & FNM_PATHNAME) && sc == L('/'))
+		/* A slash does not match a wildcard under FNM_PATHNAME. */
+		return FNM_NOMATCH;
+#ifdef EXTENDED_GLOB
+	      else if ((flags & FNM_EXTMATCH) && c == L('?') && *p == L('(')) /* ) */
+		{
+		  CHAR *newn;
+
+		  /* We can match 0 or 1 times.  If we match, return success */
+		  if (EXTMATCH (c, n, se, p, pe, flags) == 0)
+		    return (0);
+
+		  /* We didn't match the extended glob pattern, but
+		     that's OK, since we can match 0 or 1 occurrences.
+		     We need to skip the glob pattern and see if we
+		     match the rest of the string. */
+		  newn = PATSCAN (p + 1, pe, 0);
+		  /* If NEWN is 0, we have an ill-formed pattern. */
+		  p = newn ? newn : pe;
+		}
+#endif
+	      else if (c == L('?'))
+		{
+		  if (sc == L('\0'))
+		    return FNM_NOMATCH;
+		  /* One character of the string is consumed in matching
+		     this ? wildcard, so *??? won't match if there are
+		     fewer than three characters. */
+		  n++;
+		  sc = n < se ? *n : '\0';
+		}
+
+#ifdef EXTENDED_GLOB
+	      /* Handle ******(patlist) */
+	      if ((flags & FNM_EXTMATCH) && c == L('*') && *p == L('('))  /*)*/
+		{
+		  CHAR *newn;
+		  /* We need to check whether or not the extended glob
+		     pattern matches the remainder of the string.
+		     If it does, we match the entire pattern. */
+		  for (newn = n; newn < se; ++newn)
+		    {
+		      if (EXTMATCH (c, newn, se, p, pe, flags) == 0)
+			return (0);
+		    }
+		  /* We didn't match the extended glob pattern, but
+		     that's OK, since we can match 0 or more occurrences.
+		     We need to skip the glob pattern and see if we
+		     match the rest of the string. */
+		  newn = PATSCAN (p + 1, pe, 0);
+		  /* If NEWN is 0, we have an ill-formed pattern. */
+		  p = newn ? newn : pe;
+		}
+#endif
+	      if (p == pe)
+		break;
+	    }
+
+	  /* The wildcards are the last element of the pattern.  The name
+	     cannot match completely if we are looking for a pathname and
+	     it contains another slash, unless FNM_LEADING_DIR is set. */
+	  if (c == L('\0'))
+	    {
+	      int r = (flags & FNM_PATHNAME) == 0 ? 0 : FNM_NOMATCH;
+	      if (flags & FNM_PATHNAME)
+		{
+		  if (flags & FNM_LEADING_DIR)
+		    r = 0;
+		  else if (MEMCHR (n, L('/'), se - n) == NULL)
+		    r = 0;
+		}
+	      return r;
+	    }
+
+	  /* If we've hit the end of the pattern and the last character of
+	     the pattern was handled by the loop above, we've succeeded.
+	     Otherwise, we need to match that last character. */
+	  if (p == pe && (c == L('?') || c == L('*')))
+	    return (0);
+
+	  /* If we've hit the end of the string and the rest of the pattern
+	     is something that matches the empty string, we can succeed. */
+#if defined (EXTENDED_GLOB)
+	  if (n == se && ((flags & FNM_EXTMATCH) && (c == L('!') || c == L('?')) && *p == L('(')))
+	    {
+	      --p;
+	      if (EXTMATCH (c, n, se, p, pe, flags) == 0)
+		return (c == L('!') ? FNM_NOMATCH : 0);
+	      return (c == L('!') ? 0 : FNM_NOMATCH);
+	    }
+#endif
+
+	  /* If we stop at a slash in the pattern and we are looking for a
+	     pathname ([star]/foo), then consume enough of the string to stop
+	     at any slash and then try to match the rest of the pattern.  If
+	     the string doesn't contain a slash, fail */
+	  if (c == L('/') && (flags & FNM_PATHNAME))
+	    {
+	      while (n < se && *n != L('/'))
+		++n;
+	      if (n < se && *n == L('/') && (GMATCH (n+1, se, p, pe, NULL, flags) == 0))
+		return 0;
+	      return FNM_NOMATCH;	/* XXX */
+	    }
+
+	  /* General case, use recursion. */
+	  {
+	    U_CHAR c1;
+	    const CHAR *endp;
+	    struct STRUCT end;
+
+	    end.pattern = NULL;
+	    endp = MEMCHR (n, (flags & FNM_PATHNAME) ? L('/') : L('\0'), se - n);
+	    if (endp == 0)
+	      endp = se;
+
+	    c1 = ((flags & FNM_NOESCAPE) == 0 && c == L('\\')) ? *p : c;
+	    c1 = FOLD (c1);
+	    for (--p; n < endp; ++n)
+	      {
+		/* Only call strmatch if the first character indicates a
+		   possible match.  We can check the first character if
+		   we're not doing an extended glob match. */
+		if ((flags & FNM_EXTMATCH) == 0 && c != L('[') && FOLD (*n) != c1) /*]*/
+		  continue;
+
+		/* If we're doing an extended glob match and the pattern is not
+		   one of the extended glob patterns, we can check the first
+		   character. */
+		if ((flags & FNM_EXTMATCH) && p[1] != L('(') && /*)*/
+		    STRCHR (L("?*+@!"), *p) == 0 && c != L('[') && FOLD (*n) != c1) /*]*/
+		  continue;
+
+		/* Otherwise, we just recurse. */
+		if (GMATCH (n, se, p, pe, &end, flags & ~FNM_PERIOD) == 0)
+		  {
+		    if (end.pattern == NULL)
+		      return (0);
+		    break;
+		  }
+	      }
+	    /* This is a clever idea from glibc, used to avoid backtracking
+	       to a `*' that appears earlier in the pattern.  We get away
+	       without saving se and pe because they are always the same,
+	       even in the recursive calls to gmatch */ 
+	    if (end.pattern != NULL)
+	      {
+		p = end.pattern;
+		n = end.string;
+		continue;
+	      }
+
+	    return FNM_NOMATCH;
+	  }
+
+	case L('['):
+	  {
+	    if (sc == L('\0') || n == se)
+	      return FNM_NOMATCH;
+
+	    /* A character class cannot match a `.' if it is the first
+	       character of the string or if it is the first character
+	       following a slash and we are matching a pathname. */
+	    if ((flags & FNM_PERIOD) && sc == L('.') &&
+		(n == string || ((flags & FNM_PATHNAME) && n[-1] == L('/'))))
+	      return (FNM_NOMATCH);
+
+	    p = BRACKMATCH (p, sc, flags);
+	    if (p == 0)
+	      return FNM_NOMATCH;
+	  }
+	  break;
+
+	default:
+	  if ((U_CHAR)c != FOLD (sc))
+	    return (FNM_NOMATCH);
+	}
+
+      ++n;
+    }
+
+  if (n == se)
+    return (0);
+
+  if ((flags & FNM_LEADING_DIR) && *n == L('/'))
+    /* The FNM_LEADING_DIR flag says that "foo*" matches "foobar/frobozz".  */
+    return 0;
+	  
+  return (FNM_NOMATCH);
+}
+
+/* Parse a bracket expression collating symbol ([.sym.]) starting at P, find
+   the value of the symbol, and move P past the collating symbol expression.
+   The value is returned in *VP, if VP is not null. */
+static CHAR *
+PARSE_COLLSYM (p, vp)
+     CHAR *p;
+     INT *vp;
+{
+  register int pc;
+  INT val;
+
+  p++;				/* move past the `.' */
+	  
+  for (pc = 0; p[pc]; pc++)
+    if (p[pc] == L('.') && p[pc+1] == L(']'))
+      break;
+   if (p[pc] == 0)
+    {
+      if (vp)
+	*vp = INVALID;
+      return (p + pc);
+    }
+   val = COLLSYM (p, pc);
+   if (vp)
+     *vp = val;
+   return (p + pc + 2);
+}
+
+/* Use prototype definition here because of type promotion. */
+static CHAR *
+#if defined (PROTOTYPES)
+BRACKMATCH (CHAR *p, U_CHAR test, int flags)
+#else
+BRACKMATCH (p, test, flags)
+     CHAR *p;
+     U_CHAR test;
+     int flags;
+#endif
+{
+  register CHAR cstart, cend, c;
+  register int not;    /* Nonzero if the sense of the character class is inverted.  */
+  int brcnt, forcecoll, isrange;
+  INT pc;
+  CHAR *savep;
+  CHAR *brchrp;
+  U_CHAR orig_test;
+
+  orig_test = test;
+  test = FOLD (orig_test);
+
+  savep = p;
+
+  /* POSIX.2 3.13.1 says that an exclamation mark (`!') shall replace the
+     circumflex (`^') in its role in a `nonmatching list'.  A bracket
+     expression starting with an unquoted circumflex character produces
+     unspecified results.  This implementation treats the two identically. */
+  if (not = (*p == L('!') || *p == L('^')))
+    ++p;
+
+  c = *p++;
+  for (;;)
+    {
+      /* Initialize cstart and cend in case `-' is the last
+	 character of the pattern. */
+      cstart = cend = c;
+      forcecoll = 0;
+
+      /* POSIX.2 equivalence class:  [=c=].  See POSIX.2 2.8.3.2.  Find
+	 the end of the equivalence class, move the pattern pointer past
+	 it, and check for equivalence.  XXX - this handles only
+	 single-character equivalence classes, which is wrong, or at
+	 least incomplete. */
+      if (c == L('[') && *p == L('=') && p[2] == L('=') && p[3] == L(']'))
+	{
+	  pc = FOLD (p[1]);
+	  p += 4;
+	  if (COLLEQUIV (test, pc))
+	    {
+/*[*/	      /* Move past the closing `]', since the first thing we do at
+		 the `matched:' label is back p up one. */
+	      p++;
+	      goto matched;
+	    }
+	  else
+	    {
+	      c = *p++;
+	      if (c == L('\0'))
+		return ((test == L('[')) ? savep : (CHAR *)0); /*]*/
+	      c = FOLD (c);
+	      continue;
+	    }
+	}
+
+      /* POSIX.2 character class expression.  See POSIX.2 2.8.3.2. */
+      if (c == L('[') && *p == L(':'))
+	{
+	  CHAR *close, *ccname;
+
+	  pc = 0;	/* make sure invalid char classes don't match. */
+	  /* Find end of character class name */
+	  for (close = p + 1; *close != '\0'; close++)
+	    if (*close == L(':') && *(close+1) == L(']'))
+	      break;
+
+	  if (*close != L('\0'))
+	    {
+	      ccname = (CHAR *)malloc ((close - p) * sizeof (CHAR));
+	      if (ccname == 0)
+		pc = 0;
+	      else
+		{
+		  bcopy (p + 1, ccname, (close - p - 1) * sizeof (CHAR));
+		  *(ccname + (close - p - 1)) = L('\0');
+		  /* As a result of a POSIX discussion, char class names are
+		     allowed to be quoted (?) */
+		  DEQUOTE_PATHNAME (ccname);
+		  pc = IS_CCLASS (orig_test, (XCHAR *)ccname);
+		}
+	      if (pc == -1)
+		{
+		  /* CCNAME is not a valid character class in the current
+		     locale. In addition to noting no match (pc = 0), we have
+		     a choice about what to do with the invalid charclass.
+		     Posix leaves the behavior unspecified, but we're going
+		     to skip over the charclass and keep going instead of
+		     testing ORIG_TEST against each character in the class
+		     string. If we don't want to do that, take out the update
+		     of P. */
+		  pc = 0;
+		  p = close + 2;
+		}
+	      else
+		p = close + 2;		/* move past the closing `]' */
+
+	      free (ccname);
+	    }
+	    
+	  if (pc)
+	    {
+/*[*/	      /* Move past the closing `]', since the first thing we do at
+		 the `matched:' label is back p up one. */
+	      p++;
+	      goto matched;
+	    }
+	  else
+	    {
+	      /* continue the loop here, since this expression can't be
+		 the first part of a range expression. */
+	      c = *p++;
+	      if (c == L('\0'))
+		return ((test == L('[')) ? savep : (CHAR *)0);
+	      else if (c == L(']'))
+		break;
+	      c = FOLD (c);
+	      continue;
+	    }
+	}
+ 
+      /* POSIX.2 collating symbols.  See POSIX.2 2.8.3.2.  Find the end of
+	 the symbol name, make sure it is terminated by `.]', translate
+	 the name to a character using the external table, and do the
+	 comparison. */
+      if (c == L('[') && *p == L('.'))
+	{
+	  p = PARSE_COLLSYM (p, &pc);
+	  /* An invalid collating symbol cannot be the first point of a
+	     range.  If it is, we set cstart to one greater than `test',
+	     so any comparisons later will fail. */
+	  cstart = (pc == INVALID) ? test + 1 : pc;
+	  forcecoll = 1;
+	}
+
+      if (!(flags & FNM_NOESCAPE) && c == L('\\'))
+	{
+	  if (*p == '\0')
+	    return (CHAR *)0;
+	  cstart = cend = *p++;
+	}
+
+      cstart = cend = FOLD (cstart);
+      isrange = 0;
+
+      /* POSIX.2 2.8.3.1.2 says: `An expression containing a `[' that
+	 is not preceded by a backslash and is not part of a bracket
+	 expression produces undefined results.'  This implementation
+	 treats the `[' as just a character to be matched if there is
+	 not a closing `]'. */
+      if (c == L('\0'))
+	return ((test == L('[')) ? savep : (CHAR *)0);
+
+      c = *p++;
+      c = FOLD (c);
+
+      if (c == L('\0'))
+	return ((test == L('[')) ? savep : (CHAR *)0);
+
+      if ((flags & FNM_PATHNAME) && c == L('/'))
+	/* [/] can never match when matching a pathname.  */
+	return (CHAR *)0;
+
+      /* This introduces a range, unless the `-' is the last
+	 character of the class.  Find the end of the range
+	 and move past it. */
+      if (c == L('-') && *p != L(']'))
+	{
+	  cend = *p++;
+	  if (!(flags & FNM_NOESCAPE) && cend == L('\\'))
+	    cend = *p++;
+	  if (cend == L('\0'))
+	    return (CHAR *)0;
+	  if (cend == L('[') && *p == L('.'))
+	    {
+	      p = PARSE_COLLSYM (p, &pc);
+	      /* An invalid collating symbol cannot be the second part of a
+		 range expression.  If we get one, we set cend to one fewer
+		 than the test character to make sure the range test fails. */
+	      cend = (pc == INVALID) ? test - 1 : pc;
+	      forcecoll = 1;
+	    }
+	  cend = FOLD (cend);
+
+	  c = *p++;
+
+	  /* POSIX.2 2.8.3.2:  ``The ending range point shall collate
+	     equal to or higher than the starting range point; otherwise
+	     the expression shall be treated as invalid.''  Note that this
+	     applies to only the range expression; the rest of the bracket
+	     expression is still checked for matches. */
+	  if (RANGECMP (cstart, cend, forcecoll) > 0)
+	    {
+	      if (c == L(']'))
+		break;
+	      c = FOLD (c);
+	      continue;
+	    }
+	  isrange = 1;
+	}
+
+      if (isrange == 0 && test == cstart)
+        goto matched;
+      if (isrange && RANGECMP (test, cstart, forcecoll) >= 0 && RANGECMP (test, cend, forcecoll) <= 0)
+	goto matched;
+
+      if (c == L(']'))
+	break;
+    }
+  /* No match. */
+  return (!not ? (CHAR *)0 : p);
+
+matched:
+  /* Skip the rest of the [...] that already matched.  */
+  c = *--p;
+  brcnt = 1;
+  brchrp = 0;
+  while (brcnt > 0)
+    {
+      int oc;
+
+      /* A `[' without a matching `]' is just another character to match. */
+      if (c == L('\0'))
+	return ((test == L('[')) ? savep : (CHAR *)0);
+
+      oc = c;
+      c = *p++;
+      if (c == L('[') && (*p == L('=') || *p == L(':') || *p == L('.')))
+	{
+	  brcnt++;
+	  brchrp = p++;		/* skip over the char after the left bracket */
+	  if ((c = *p) == L('\0'))
+	    return ((test == L('[')) ? savep : (CHAR *)0);
+	  /* If *brchrp == ':' we should check that the rest of the characters
+	     form a valid character class name. We don't do that yet, but we
+	     keep BRCHRP in case we want to. */
+	}
+      /* We only want to check brchrp if we set it above. */
+      else if (c == L(']') && brcnt > 1 && brchrp != 0 && oc == *brchrp)
+	{
+	  brcnt--;
+	  brchrp = 0;		/* just in case */
+	}
+      /* Left bracket loses its special meaning inside a bracket expression.
+         It is only valid when followed by a `.', `=', or `:', which we check
+         for above. Technically the right bracket can appear in a collating
+         symbol, so we check for that here. Otherwise, it terminates the
+         bracket expression. */
+      else if (c == L(']') && (brchrp == 0 || *brchrp != L('.')) && brcnt >= 1)
+	brcnt = 0;
+      else if (!(flags & FNM_NOESCAPE) && c == L('\\'))
+	{
+	  if (*p == '\0')
+	    return (CHAR *)0;
+	  /* XXX 1003.2d11 is unclear if this is right. */
+	  ++p;
+	}
+    }
+  return (not ? (CHAR *)0 : p);
+}
+
+#if defined (EXTENDED_GLOB)
+/* ksh-like extended pattern matching:
+
+	[?*+@!](pat-list)
+
+   where pat-list is a list of one or patterns separated by `|'.  Operation
+   is as follows:
+
+	?(patlist)	match zero or one of the given patterns
+	*(patlist)	match zero or more of the given patterns
+	+(patlist)	match one or more of the given patterns
+	@(patlist)	match exactly one of the given patterns
+	!(patlist)	match anything except one of the given patterns
+*/
+
+/* Scan a pattern starting at STRING and ending at END, keeping track of
+   embedded () and [].  If DELIM is 0, we scan until a matching `)'
+   because we're scanning a `patlist'.  Otherwise, we scan until we see
+   DELIM.  In all cases, we never scan past END.  The return value is the
+   first character after the matching DELIM or NULL if the pattern is
+   empty or invalid. */
+/*static*/ CHAR *
+PATSCAN (string, end, delim)
+     CHAR *string, *end;
+     INT delim;
+{
+  int pnest, bnest, skip;
+  INT cchar;
+  CHAR *s, c, *bfirst;
+
+  pnest = bnest = skip = 0;
+  cchar = 0;
+  bfirst = NULL;
+
+  if (string == end)
+    return (NULL);
+
+  for (s = string; c = *s; s++)
+    {
+      if (s >= end)
+	return (s);
+      if (skip)
+	{
+	  skip = 0;
+	  continue;
+	}
+      switch (c)
+	{
+	case L('\\'):
+	  skip = 1;
+	  break;
+
+	case L('\0'):
+	  return ((CHAR *)NULL);
+
+	/* `[' is not special inside a bracket expression, but it may
+	   introduce one of the special POSIX bracket expressions
+	   ([.SYM.], [=c=], [: ... :]) that needs special handling. */
+	case L('['):
+	  if (bnest == 0)
+	    {
+	      bfirst = s + 1;
+	      if (*bfirst == L('!') || *bfirst == L('^'))
+		bfirst++;
+	      bnest++;
+	    }
+	  else if (s[1] == L(':') || s[1] == L('.') || s[1] == L('='))
+	    cchar = s[1];
+	  break;
+
+	/* `]' is not special if it's the first char (after a leading `!'
+	   or `^') in a bracket expression or if it's part of one of the
+	   special POSIX bracket expressions ([.SYM.], [=c=], [: ... :]) */
+	case L(']'):
+	  if (bnest)
+	    {
+	      if (cchar && s[-1] == cchar)
+		cchar = 0;
+	      else if (s != bfirst)
+		{
+		  bnest--;
+		  bfirst = 0;
+		}
+	    }
+	  break;
+
+	case L('('):
+	  if (bnest == 0)
+	    pnest++;
+	  break;
+
+	case L(')'):
+	  if (bnest == 0 && pnest-- <= 0)
+	    return ++s;
+	  break;
+
+	case L('|'):
+	  if (bnest == 0 && pnest == 0 && delim == L('|'))
+	    return ++s;
+	  break;
+	}
+    }
+
+  return (NULL);
+}
+
+/* Return 0 if dequoted pattern matches S in the current locale. */
+static int
+STRCOMPARE (p, pe, s, se)
+     CHAR *p, *pe, *s, *se;
+{
+  int ret;
+  CHAR c1, c2;
+  int l1, l2;
+
+  l1 = pe - p;
+  l2 = se - s;
+
+  if (l1 != l2)
+    return (FNM_NOMATCH);	/* unequal lengths, can't be identical */
+  
+  c1 = *pe;
+  c2 = *se;
+
+  if (c1 != 0)
+    *pe = '\0';
+  if (c2 != 0)
+    *se = '\0';
+    
+#if HAVE_MULTIBYTE || defined (HAVE_STRCOLL)
+  ret = STRCOLL ((XCHAR *)p, (XCHAR *)s);
+#else
+  ret = STRCMP ((XCHAR *)p, (XCHAR *)s);
+#endif
+
+  if (c1 != 0)
+    *pe = c1;
+  if (c2 != 0)
+    *se = c2;
+
+  return (ret == 0 ? ret : FNM_NOMATCH);
+}
+
+/* Match a ksh extended pattern specifier.  Return FNM_NOMATCH on failure or
+   0 on success.  This is handed the entire rest of the pattern and string
+   the first time an extended pattern specifier is encountered, so it calls
+   gmatch recursively. */
+static int
+EXTMATCH (xc, s, se, p, pe, flags)
+     INT xc;		/* select which operation */
+     CHAR *s, *se;
+     CHAR *p, *pe;
+     int flags;
+{
+  CHAR *prest;			/* pointer to rest of pattern */
+  CHAR *psub;			/* pointer to sub-pattern */
+  CHAR *pnext;			/* pointer to next sub-pattern */
+  CHAR *srest;			/* pointer to rest of string */
+  int m1, m2, xflags;		/* xflags = flags passed to recursive matches */
+
+#if DEBUG_MATCHING
+fprintf(stderr, "extmatch: xc = %c\n", xc);
+fprintf(stderr, "extmatch: s = %s; se = %s\n", s, se);
+fprintf(stderr, "extmatch: p = %s; pe = %s\n", p, pe);
+fprintf(stderr, "extmatch: flags = %d\n", flags);
+#endif
+
+  prest = PATSCAN (p + (*p == L('(')), pe, 0); /* ) */
+  if (prest == 0)
+    /* If PREST is 0, we failed to scan a valid pattern.  In this
+       case, we just want to compare the two as strings. */
+    return (STRCOMPARE (p - 1, pe, s, se));
+
+  switch (xc)
+    {
+    case L('+'):		/* match one or more occurrences */
+    case L('*'):		/* match zero or more occurrences */
+      /* If we can get away with no matches, don't even bother.  Just
+	 call GMATCH on the rest of the pattern and return success if
+	 it succeeds. */
+      if (xc == L('*') && (GMATCH (s, se, prest, pe, NULL, flags) == 0))
+	return 0;
+
+      /* OK, we have to do this the hard way.  First, we make sure one of
+	 the subpatterns matches, then we try to match the rest of the
+	 string. */
+      for (psub = p + 1; ; psub = pnext)
+	{
+	  pnext = PATSCAN (psub, pe, L('|'));
+	  for (srest = s; srest <= se; srest++)
+	    {
+	      /* Match this substring (S -> SREST) against this
+		 subpattern (psub -> pnext - 1) */
+	      m1 = GMATCH (s, srest, psub, pnext - 1, NULL, flags) == 0;
+	      /* OK, we matched a subpattern, so make sure the rest of the
+		 string matches the rest of the pattern.  Also handle
+		 multiple matches of the pattern. */
+	      if (m1)
+		{
+		  /* if srest > s, we are not at start of string */
+		  xflags = (srest > s) ? (flags & ~FNM_PERIOD) : flags;
+		  m2 = (GMATCH (srest, se, prest, pe, NULL, xflags) == 0) ||
+			(s != srest && GMATCH (srest, se, p - 1, pe, NULL, xflags) == 0);
+		}
+	      if (m1 && m2)
+		return (0);
+	    }
+	  if (pnext == prest)
+	    break;
+	}
+      return (FNM_NOMATCH);
+
+    case L('?'):		/* match zero or one of the patterns */
+    case L('@'):		/* match one (or more) of the patterns */
+      /* If we can get away with no matches, don't even bother.  Just
+	 call gmatch on the rest of the pattern and return success if
+	 it succeeds. */
+      if (xc == L('?') && (GMATCH (s, se, prest, pe, NULL, flags) == 0))
+	return 0;
+
+      /* OK, we have to do this the hard way.  First, we see if one of
+	 the subpatterns matches, then, if it does, we try to match the
+	 rest of the string. */
+      for (psub = p + 1; ; psub = pnext)
+	{
+	  pnext = PATSCAN (psub, pe, L('|'));
+	  srest = (prest == pe) ? se : s;
+	  for ( ; srest <= se; srest++)
+	    {
+	      /* if srest > s, we are not at start of string */
+	      xflags = (srest > s) ? (flags & ~FNM_PERIOD) : flags;
+	      if (GMATCH (s, srest, psub, pnext - 1, NULL, flags) == 0 &&
+		  GMATCH (srest, se, prest, pe, NULL, xflags) == 0)
+		return (0);
+	    }
+	  if (pnext == prest)
+	    break;
+	}
+      return (FNM_NOMATCH);
+
+    case '!':		/* match anything *except* one of the patterns */
+      for (srest = s; srest <= se; srest++)
+	{
+	  m1 = 0;
+	  for (psub = p + 1; ; psub = pnext)
+	    {
+	      pnext = PATSCAN (psub, pe, L('|'));
+	      /* If one of the patterns matches, just bail immediately. */
+	      if (m1 = (GMATCH (s, srest, psub, pnext - 1, NULL, flags) == 0))
+		break;
+	      if (pnext == prest)
+		break;
+	    }
+
+	  /* If nothing matched, but the string starts with a period and we
+	     need to match periods explicitly, don't return this as a match,
+	     even for negation. Might need to do this only if srest == s. */
+	  if (m1 == 0 && *s == '.' && (flags & FNM_PERIOD))
+	    return (FNM_NOMATCH);
+
+	  /* if srest > s, we are not at start of string */
+	  xflags = (srest > s) ? (flags & ~FNM_PERIOD) : flags;
+	  if (m1 == 0 && GMATCH (srest, se, prest, pe, NULL, xflags) == 0)
+	    return (0);
+	}
+      return (FNM_NOMATCH);
+    }
+
+  return (FNM_NOMATCH);
+}
+#endif /* EXTENDED_GLOB */
+
+#undef IS_CCLASS
+#undef FOLD
+#undef CHAR
+#undef U_CHAR
+#undef XCHAR
+#undef INT
+#undef INVALID
+#undef FCT
+#undef GMATCH
+#undef COLLSYM
+#undef PARSE_COLLSYM
+#undef PATSCAN
+#undef STRCOMPARE
+#undef EXTMATCH
+#undef DEQUOTE_PATHNAME
+#undef STRUCT
+#undef BRACKMATCH
+#undef STRCHR
+#undef STRCOLL
+#undef STRLEN
+#undef STRCMP
+#undef MEMCHR
+#undef COLLEQUIV
+#undef RANGECMP
+#undef L
diff --git a/lib/glob/smatch.c b/lib/glob/smatch.c
new file mode 100644
index 0000000..a58456d
--- /dev/null
+++ b/lib/glob/smatch.c
@@ -0,0 +1,617 @@
+/* strmatch.c -- ksh-like extended pattern matching for the shell and filename
+		globbing. */
+
+/* Copyright (C) 1991-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+   
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#include <stdio.h>	/* for debugging */
+				
+#include "strmatch.h"
+#include <chartypes.h>
+
+#include "bashansi.h"
+#include "shmbutil.h"
+#include "xmalloc.h"
+
+#include <errno.h>
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+#if FNMATCH_EQUIV_FALLBACK
+/* We don't include <fnmatch.h> in order to avoid namespace collisions; the
+   internal strmatch still uses the FNM_ constants. */
+extern int fnmatch (const char *, const char *, int);
+#endif
+
+/* First, compile `sm_loop.c' for single-byte characters. */
+#define CHAR	unsigned char
+#define U_CHAR	unsigned char
+#define XCHAR	char
+#define INT	int
+#define L(CS)	CS
+#define INVALID	-1
+
+#undef STREQ
+#undef STREQN
+#define STREQ(a, b) ((a)[0] == (b)[0] && strcmp(a, b) == 0)
+#define STREQN(a, b, n) ((a)[0] == (b)[0] && strncmp(a, b, n) == 0)
+
+#ifndef GLOBASCII_DEFAULT
+#  define GLOBASCII_DEFAULT 0
+#endif
+
+int glob_asciirange = GLOBASCII_DEFAULT;
+
+#if FNMATCH_EQUIV_FALLBACK
+/* Construct a string w1 = "c1" and a pattern w2 = "[[=c2=]]" and pass them
+   to fnmatch to see if wide characters c1 and c2 collate as members of the
+   same equivalence class. We can't really do this portably any other way */
+static int
+_fnmatch_fallback (s, p)
+     int s, p;			/* string char, patchar */
+{
+  char s1[2];			/* string */
+  char s2[8];			/* constructed pattern */
+
+  s1[0] = (unsigned char)s;
+  s1[1] = '\0';
+
+  /* reconstruct the pattern */
+  s2[0] = s2[1] = '[';
+  s2[2] = '=';
+  s2[3] = (unsigned char)p;
+  s2[4] = '=';
+  s2[5] = s2[6] = ']';
+  s2[7] = '\0';
+
+  return (fnmatch ((const char *)s2, (const char *)s1, 0));
+}
+#endif
+
+/* We use strcoll(3) for range comparisons in bracket expressions,
+   even though it can have unwanted side effects in locales
+   other than POSIX or US.  For instance, in the de locale, [A-Z] matches
+   all characters.  If GLOB_ASCIIRANGE is non-zero, and we're not forcing
+   the use of strcoll (e.g., for explicit collating symbols), we use
+   straight ordering as if in the C locale. */
+
+#if defined (HAVE_STRCOLL)
+/* Helper functions for collating symbol equivalence. */
+
+/* Return 0 if C1 == C2 or collates equally if FORCECOLL is non-zero. */
+static int
+charcmp (c1, c2, forcecoll)
+     int c1, c2;
+     int forcecoll;
+{
+  static char s1[2] = { ' ', '\0' };
+  static char s2[2] = { ' ', '\0' };
+  int ret;
+
+  /* Eight bits only.  Period. */
+  c1 &= 0xFF;
+  c2 &= 0xFF;
+
+  if (c1 == c2)
+    return (0);
+
+  if (forcecoll == 0 && glob_asciirange)
+    return (c1 - c2);
+
+  s1[0] = c1;
+  s2[0] = c2;
+
+  return (strcoll (s1, s2));
+}
+
+static int
+rangecmp (c1, c2, forcecoll)
+     int c1, c2;
+     int forcecoll;
+{
+  int r;
+
+  r = charcmp (c1, c2, forcecoll);
+
+  /* We impose a total ordering here by returning c1-c2 if charcmp returns 0 */
+  if (r != 0)
+    return r;
+  return (c1 - c2);		/* impose total ordering */
+}
+#else /* !HAVE_STRCOLL */
+#  define rangecmp(c1, c2, f)	((int)(c1) - (int)(c2))
+#endif /* !HAVE_STRCOLL */
+
+#if defined (HAVE_STRCOLL)
+/* Returns 1 if chars C and EQUIV collate equally in the current locale. */
+static int
+collequiv (c, equiv)
+     int c, equiv;
+{
+  if (charcmp (c, equiv, 1) == 0)
+    return 1;
+
+#if FNMATCH_EQUIV_FALLBACK
+  return (_fnmatch_fallback (c, equiv) == 0);
+#else
+  return 0;
+#endif
+  
+}
+#else
+#  define collequiv(c, equiv)	((c) == (equiv))
+#endif
+
+#define _COLLSYM	_collsym
+#define __COLLSYM	__collsym
+#define POSIXCOLL	posix_collsyms
+#include "collsyms.h"
+
+static int
+collsym (s, len)
+     CHAR *s;
+     int len;
+{
+  register struct _collsym *csp;
+  char *x;
+
+  x = (char *)s;
+  for (csp = posix_collsyms; csp->name; csp++)
+    {
+      if (STREQN(csp->name, x, len) && csp->name[len] == '\0')
+	return (csp->code);
+    }
+  if (len == 1)
+    return s[0];
+  return INVALID;
+}
+
+/* unibyte character classification */
+#if !defined (isascii) && !defined (HAVE_ISASCII)
+#  define isascii(c)	((unsigned int)(c) <= 0177)
+#endif
+
+enum char_class
+  {
+    CC_NO_CLASS = 0,
+    CC_ASCII, CC_ALNUM, CC_ALPHA, CC_BLANK, CC_CNTRL, CC_DIGIT, CC_GRAPH,
+    CC_LOWER, CC_PRINT, CC_PUNCT, CC_SPACE, CC_UPPER, CC_WORD, CC_XDIGIT
+  };
+
+static char const *const cclass_name[] =
+  {
+    "",
+    "ascii", "alnum", "alpha", "blank", "cntrl", "digit", "graph",
+    "lower", "print", "punct", "space", "upper", "word", "xdigit"
+  };
+
+#define N_CHAR_CLASS (sizeof(cclass_name) / sizeof (cclass_name[0]))
+
+static enum char_class
+is_valid_cclass (name)
+     const char *name;
+{
+  enum char_class ret;
+  int i;
+
+  ret = CC_NO_CLASS;
+
+  for (i = 1; i < N_CHAR_CLASS; i++)
+    {
+      if (STREQ (name, cclass_name[i]))
+	{
+	  ret = (enum char_class)i;
+	  break;
+	}
+    }
+
+  return ret;
+}
+
+static int
+cclass_test (c, char_class)
+     int c;
+     enum char_class char_class;
+{
+  int result;
+
+  switch (char_class)
+    {
+      case CC_ASCII:
+	result = isascii (c);
+	break;
+      case CC_ALNUM:
+	result = ISALNUM (c);
+	break;
+      case CC_ALPHA:
+	result = ISALPHA (c);
+	break;
+      case CC_BLANK:  
+	result = ISBLANK (c);
+	break;
+      case CC_CNTRL:
+	result = ISCNTRL (c);
+	break;
+      case CC_DIGIT:
+	result = ISDIGIT (c);
+	break;
+      case CC_GRAPH:
+	result = ISGRAPH (c);
+	break;
+      case CC_LOWER:
+	result = ISLOWER (c);
+	break;
+      case CC_PRINT: 
+	result = ISPRINT (c);
+	break;
+      case CC_PUNCT:
+	result = ISPUNCT (c);
+	break;
+      case CC_SPACE:
+	result = ISSPACE (c);
+	break;
+      case CC_UPPER:
+	result = ISUPPER (c);
+	break;
+      case CC_WORD:
+        result = (ISALNUM (c) || c == '_');
+	break;
+      case CC_XDIGIT:
+	result = ISXDIGIT (c);
+	break;
+      default:
+	result = -1;
+	break;
+    }
+
+  return result;  
+}
+	
+static int
+is_cclass (c, name)
+     int c;
+     const char *name;
+{
+  enum char_class char_class;
+  int result;
+
+  char_class = is_valid_cclass (name);
+  if (char_class == CC_NO_CLASS)
+    return -1;
+
+  result = cclass_test (c, char_class);
+  return (result);
+}
+
+/* Now include `sm_loop.c' for single-byte characters. */
+/* The result of FOLD is an `unsigned char' */
+# define FOLD(c) ((flags & FNM_CASEFOLD) \
+	? TOLOWER ((unsigned char)c) \
+	: ((unsigned char)c))
+
+#define FCT			internal_strmatch
+#define GMATCH			gmatch
+#define COLLSYM			collsym
+#define PARSE_COLLSYM		parse_collsym
+#define BRACKMATCH		brackmatch
+#define PATSCAN			glob_patscan
+#define STRCOMPARE		strcompare
+#define EXTMATCH		extmatch
+#define DEQUOTE_PATHNAME	udequote_pathname
+#define STRUCT			smat_struct
+#define STRCHR(S, C)		strchr((S), (C))
+#define MEMCHR(S, C, N)		memchr((S), (C), (N))
+#define STRCOLL(S1, S2)		strcoll((S1), (S2))
+#define STRLEN(S)		strlen(S)
+#define STRCMP(S1, S2)		strcmp((S1), (S2))
+#define RANGECMP(C1, C2, F)	rangecmp((C1), (C2), (F))
+#define COLLEQUIV(C1, C2)	collequiv((C1), (C2))
+#define CTYPE_T			enum char_class
+#define IS_CCLASS(C, S)		is_cclass((C), (S))
+#include "sm_loop.c"
+
+#if HANDLE_MULTIBYTE
+
+#  define CHAR		wchar_t
+#  define U_CHAR	wint_t
+#  define XCHAR		wchar_t
+#  define INT		wint_t
+#  define L(CS)		L##CS
+#  define INVALID	WEOF
+
+#  undef STREQ
+#  undef STREQN
+#  define STREQ(s1, s2) ((wcscmp (s1, s2) == 0))
+#  define STREQN(a, b, n) ((a)[0] == (b)[0] && wcsncmp(a, b, n) == 0)
+
+extern char *mbsmbchar PARAMS((const char *));
+
+#if FNMATCH_EQUIV_FALLBACK
+/* Construct a string w1 = "c1" and a pattern w2 = "[[=c2=]]" and pass them
+   to fnmatch to see if wide characters c1 and c2 collate as members of the
+   same equivalence class. We can't really do this portably any other way */
+static int
+_fnmatch_fallback_wc (c1, c2)
+     wchar_t c1, c2;			/* string char, patchar */
+{
+  char w1[MB_LEN_MAX+1];		/* string */
+  char w2[MB_LEN_MAX+8];		/* constructed pattern */
+  int l1, l2;
+
+  l1 = wctomb (w1, c1);
+  if (l1 == -1)
+    return (2);
+  w1[l1] = '\0';
+
+  /* reconstruct the pattern */
+  w2[0] = w2[1] = '[';
+  w2[2] = '=';
+  l2 = wctomb (w2+3, c2);
+  if (l2 == -1)
+    return (2);
+  w2[l2+3] = '=';
+  w2[l2+4] = w2[l2+5] = ']';
+  w2[l2+6] = '\0';
+
+  return (fnmatch ((const char *)w2, (const char *)w1, 0));
+}
+#endif
+
+static int
+charcmp_wc (c1, c2, forcecoll)
+     wint_t c1, c2;
+     int forcecoll;
+{
+  static wchar_t s1[2] = { L' ', L'\0' };
+  static wchar_t s2[2] = { L' ', L'\0' };
+  int r;
+
+  if (c1 == c2)
+    return 0;
+
+  if (forcecoll == 0 && glob_asciirange && c1 <= UCHAR_MAX && c2 <= UCHAR_MAX)
+    return ((int)(c1 - c2));
+
+  s1[0] = c1;
+  s2[0] = c2;
+
+  return (wcscoll (s1, s2));
+}
+
+static int
+rangecmp_wc (c1, c2, forcecoll)
+     wint_t c1, c2;
+     int forcecoll;
+{
+  int r;
+
+  r = charcmp_wc (c1, c2, forcecoll);
+
+  /* We impose a total ordering here by returning c1-c2 if charcmp returns 0,
+     as we do above in the single-byte case. */
+  if (r != 0 || forcecoll)
+    return r;
+  return ((int)(c1 - c2));		/* impose total ordering */
+}
+
+/* Returns 1 if wide chars C and EQUIV collate equally in the current locale. */
+static int
+collequiv_wc (c, equiv)
+     wint_t c, equiv;
+{
+  wchar_t s, p;
+
+  if (charcmp_wc (c, equiv, 1) == 0)
+    return 1;
+
+#if FNMATCH_EQUIV_FALLBACK
+/* We check explicitly for success (fnmatch returns 0) to avoid problems if
+   our local definition of FNM_NOMATCH (strmatch.h) doesn't match the
+   system's (fnmatch.h). We don't care about error return values here. */
+
+  s = c;
+  p = equiv;
+  return (_fnmatch_fallback_wc (s, p) == 0);
+#else
+  return 0;
+#endif
+}
+
+/* Helper function for collating symbol. */
+#  define _COLLSYM	_collwcsym
+#  define __COLLSYM	__collwcsym
+#  define POSIXCOLL	posix_collwcsyms
+#  include "collsyms.h"
+
+static wint_t
+collwcsym (s, len)
+     wchar_t *s;
+     int len;
+{
+  register struct _collwcsym *csp;
+
+  for (csp = posix_collwcsyms; csp->name; csp++)
+    {
+      if (STREQN(csp->name, s, len) && csp->name[len] == L'\0')
+	return (csp->code);
+    }
+  if (len == 1)
+    return s[0];
+  return INVALID;
+}
+
+static int
+is_wcclass (wc, name)
+     wint_t wc;
+     wchar_t *name;
+{
+  char *mbs;
+  mbstate_t state;
+  size_t mbslength;
+  wctype_t desc;
+  int want_word;
+
+  if ((wctype ("ascii") == (wctype_t)0) && (wcscmp (name, L"ascii") == 0))
+    {
+      int c;
+
+      if ((c = wctob (wc)) == EOF)
+	return 0;
+      else
+        return (c <= 0x7F);
+    }
+
+  want_word = (wcscmp (name, L"word") == 0);
+  if (want_word)
+    name = L"alnum";
+
+  memset (&state, '\0', sizeof (mbstate_t));
+  mbs = (char *) malloc (wcslen(name) * MB_CUR_MAX + 1);
+  if (mbs == 0)
+    return -1;
+  mbslength = wcsrtombs (mbs, (const wchar_t **)&name, (wcslen(name) * MB_CUR_MAX + 1), &state);
+
+  if (mbslength == (size_t)-1 || mbslength == (size_t)-2)
+    {
+      free (mbs);
+      return -1;
+    }
+  desc = wctype (mbs);
+  free (mbs);
+
+  if (desc == (wctype_t)0)
+    return -1;
+
+  if (want_word)
+    return (iswctype (wc, desc) || wc == L'_');
+  else
+    return (iswctype (wc, desc));
+}
+
+/* Return 1 if there are no char class [:class:] expressions (degenerate case)
+   or only posix-specified (C locale supported) char class expressions in
+   PATTERN.  These are the ones where it's safe to punt to the single-byte
+   code, since wide character support allows locale-defined char classes.
+   This only uses single-byte code, but is only needed to support multibyte
+   locales. */
+static int
+posix_cclass_only (pattern)
+     char *pattern;
+{
+  char *p, *p1;
+  char cc[16];		/* sufficient for all valid posix char class names */
+  enum char_class valid;
+
+  p = pattern;
+  while (p = strchr (p, '['))
+    {
+      if (p[1] != ':')
+	{
+	  p++;
+	  continue;
+        }
+      p += 2;		/* skip past "[:" */
+      /* Find end of char class expression */
+      for (p1 = p; *p1;  p1++)
+	if (*p1 == ':' && p1[1] == ']')
+	  break;
+      if (*p1 == 0)	/* no char class expression found */
+	break;
+      /* Find char class name and validate it against posix char classes */
+      if ((p1 - p) >= sizeof (cc))
+	return 0;
+      bcopy (p, cc, p1 - p);
+      cc[p1 - p] = '\0';
+      valid = is_valid_cclass (cc);
+      if (valid == CC_NO_CLASS)
+	return 0;		/* found unrecognized char class name */
+
+      p = p1 + 2;		/* found posix char class name */
+    }
+    
+  return 1;			/* no char class names or only posix */
+}      
+
+/* Now include `sm_loop.c' for multibyte characters. */
+#define FOLD(c) ((flags & FNM_CASEFOLD) && iswupper (c) ? towlower (c) : (c))
+#define FCT			internal_wstrmatch
+#define GMATCH			gmatch_wc
+#define COLLSYM			collwcsym
+#define PARSE_COLLSYM		parse_collwcsym
+#define BRACKMATCH		brackmatch_wc
+#define PATSCAN			glob_patscan_wc
+#define STRCOMPARE		wscompare
+#define EXTMATCH		extmatch_wc
+#define DEQUOTE_PATHNAME	wcdequote_pathname
+#define STRUCT			wcsmat_struct
+#define STRCHR(S, C)		wcschr((S), (C))
+#define MEMCHR(S, C, N)		wmemchr((S), (C), (N))
+#define STRCOLL(S1, S2)		wcscoll((S1), (S2))
+#define STRLEN(S)		wcslen(S)
+#define STRCMP(S1, S2)		wcscmp((S1), (S2))
+#define RANGECMP(C1, C2, F)	rangecmp_wc((C1), (C2), (F))
+#define COLLEQUIV(C1, C2)	collequiv_wc((C1), (C2))
+#define CTYPE_T			enum char_class
+#define IS_CCLASS(C, S)		is_wcclass((C), (S))
+#include "sm_loop.c"
+
+#endif /* HAVE_MULTIBYTE */
+
+int
+xstrmatch (pattern, string, flags)
+     char *pattern;
+     char *string;
+     int flags;
+{
+#if HANDLE_MULTIBYTE
+  int ret;
+  size_t n;
+  wchar_t *wpattern, *wstring;
+  size_t plen, slen, mplen, mslen;
+
+  if (MB_CUR_MAX == 1)
+    return (internal_strmatch ((unsigned char *)pattern, (unsigned char *)string, flags));
+
+  if (mbsmbchar (string) == 0 && mbsmbchar (pattern) == 0 && posix_cclass_only (pattern))
+    return (internal_strmatch ((unsigned char *)pattern, (unsigned char *)string, flags));
+
+  n = xdupmbstowcs (&wpattern, NULL, pattern);
+  if (n == (size_t)-1 || n == (size_t)-2)
+    return (internal_strmatch ((unsigned char *)pattern, (unsigned char *)string, flags));
+
+  n = xdupmbstowcs (&wstring, NULL, string);
+  if (n == (size_t)-1 || n == (size_t)-2)
+    {
+      free (wpattern);
+      return (internal_strmatch ((unsigned char *)pattern, (unsigned char *)string, flags));
+    }
+
+  ret = internal_wstrmatch (wpattern, wstring, flags);
+
+  free (wpattern);
+  free (wstring);
+
+  return ret;
+#else
+  return (internal_strmatch ((unsigned char *)pattern, (unsigned char *)string, flags));
+#endif /* !HANDLE_MULTIBYTE */
+}
diff --git a/lib/glob/strmatch.c b/lib/glob/strmatch.c
new file mode 100644
index 0000000..5b7b49f
--- /dev/null
+++ b/lib/glob/strmatch.c
@@ -0,0 +1,79 @@
+/* strmatch.c -- ksh-like extended pattern matching for the shell and filename
+		globbing. */
+
+/* Copyright (C) 1991-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+   
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#include "stdc.h"
+#include "strmatch.h"
+
+extern int xstrmatch PARAMS((char *, char *, int));
+#if defined (HANDLE_MULTIBYTE)
+extern int internal_wstrmatch PARAMS((wchar_t *, wchar_t *, int));
+#endif
+
+int
+strmatch (pattern, string, flags)
+     char *pattern;
+     char *string;
+     int flags;
+{
+  if (string == 0 || pattern == 0)
+    return FNM_NOMATCH;
+
+  return (xstrmatch (pattern, string, flags));
+}
+
+#if defined (HANDLE_MULTIBYTE)
+int
+wcsmatch (wpattern, wstring, flags)
+     wchar_t *wpattern;
+     wchar_t *wstring;
+     int flags;
+{
+  if (wstring == 0 || wpattern == 0)
+    return (FNM_NOMATCH);
+
+  return (internal_wstrmatch (wpattern, wstring, flags));
+}
+#endif
+
+#ifdef TEST
+main (c, v)
+     int c;
+     char **v;
+{
+  char *string, *pat;
+
+  string = v[1];
+  pat = v[2];
+
+  if (strmatch (pat, string, 0) == 0)
+    {
+      printf ("%s matches %s\n", string, pat);
+      exit (0);
+    }
+  else
+    {
+      printf ("%s does not match %s\n", string, pat);
+      exit (1);
+    }
+}
+#endif
diff --git a/lib/glob/strmatch.h b/lib/glob/strmatch.h
new file mode 100644
index 0000000..fa7be7b
--- /dev/null
+++ b/lib/glob/strmatch.h
@@ -0,0 +1,64 @@
+/* Copyright (C) 1991-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne-Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef	_STRMATCH_H
+#define	_STRMATCH_H	1
+
+#include <config.h>
+
+#include "stdc.h"
+
+/* We #undef these before defining them because some losing systems
+   (HP-UX A.08.07 for example) define these in <unistd.h>.  */
+#undef  FNM_PATHNAME
+#undef  FNM_NOESCAPE
+#undef  FNM_PERIOD
+
+/* Bits set in the FLAGS argument to `strmatch'.  */
+
+/* standard flags are like fnmatch(3). */
+#define	FNM_PATHNAME	(1 << 0) /* No wildcard can ever match `/'.  */
+#define	FNM_NOESCAPE	(1 << 1) /* Backslashes don't quote special chars.  */
+#define	FNM_PERIOD	(1 << 2) /* Leading `.' is matched only explicitly.  */
+
+/* extended flags not available in most libc fnmatch versions, but we undef
+   them to avoid any possible warnings. */
+#undef FNM_LEADING_DIR
+#undef FNM_CASEFOLD
+#undef FNM_EXTMATCH
+
+#define FNM_LEADING_DIR	(1 << 3) /* Ignore `/...' after a match. */
+#define FNM_CASEFOLD	(1 << 4) /* Compare without regard to case. */
+#define FNM_EXTMATCH	(1 << 5) /* Use ksh-like extended matching. */
+
+#define FNM_FIRSTCHAR	(1 << 6) /* Match only the first character */
+
+/* Value returned by `strmatch' if STRING does not match PATTERN.  */
+#undef FNM_NOMATCH
+
+#define	FNM_NOMATCH	1
+
+/* Match STRING against the filename pattern PATTERN,
+   returning zero if it matches, FNM_NOMATCH if not.  */
+extern int strmatch PARAMS((char *, char *, int));
+
+#if HANDLE_MULTIBYTE
+extern int wcsmatch PARAMS((wchar_t *, wchar_t *, int));
+#endif
+
+#endif /* _STRMATCH_H */
diff --git a/lib/glob/xmbsrtowcs.c b/lib/glob/xmbsrtowcs.c
new file mode 100644
index 0000000..17250c3
--- /dev/null
+++ b/lib/glob/xmbsrtowcs.c
@@ -0,0 +1,523 @@
+/* xmbsrtowcs.c -- replacement function for mbsrtowcs */
+
+/* Copyright (C) 2002-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* Ask for GNU extensions to get extern declaration for mbsnrtowcs if
+   available via glibc. */
+#ifndef _GNU_SOURCE
+#  define _GNU_SOURCE 1
+#endif
+
+#include <config.h>
+
+#include <bashansi.h>
+
+/* <wchar.h>, <wctype.h> and <stdlib.h> are included in "shmbutil.h".
+   If <wchar.h>, <wctype.h>, mbsrtowcs(), exist, HANDLE_MULTIBYTE
+   is defined as 1. */
+#include <shmbutil.h>
+
+#if HANDLE_MULTIBYTE
+
+#include <errno.h>
+#if !defined (errno)
+extern int errno;
+#endif
+
+#define WSBUF_INC 32
+
+#ifndef FREE
+#  define FREE(x)	do { if (x) free (x); } while (0)
+#endif
+
+#if ! HAVE_STRCHRNUL
+extern char *strchrnul PARAMS((const char *, int));
+#endif
+
+/* On some locales (ex. ja_JP.sjis), mbsrtowc doesn't convert 0x5c to U<0x5c>.
+   So, this function is made for converting 0x5c to U<0x5c>. */
+
+static mbstate_t local_state;
+static int local_state_use = 0;
+
+size_t
+xmbsrtowcs (dest, src, len, pstate)
+    wchar_t *dest;
+    const char **src;
+    size_t len;
+    mbstate_t *pstate;
+{
+  mbstate_t *ps;
+  size_t mblength, wclength, n;
+
+  ps = pstate;
+  if (pstate == NULL)
+    {
+      if (!local_state_use)
+	{
+	  memset (&local_state, '\0', sizeof(mbstate_t));
+	  local_state_use = 1;
+	}
+      ps = &local_state;
+    }
+
+  n = strlen (*src);
+
+  if (dest == NULL)
+    {
+      wchar_t *wsbuf;
+      const char *mbs;
+      mbstate_t psbuf;
+
+      /* It doesn't matter if malloc fails here, since mbsrtowcs should do
+	 the right thing with a NULL first argument. */
+      wsbuf = (wchar_t *) malloc ((n + 1) * sizeof(wchar_t));
+      mbs = *src;
+      psbuf = *ps;
+
+      wclength = mbsrtowcs (wsbuf, &mbs, n, &psbuf);
+
+      if (wsbuf)
+	free (wsbuf);
+      return wclength;
+    }
+      
+  for (wclength = 0; wclength < len; wclength++, dest++)
+    {
+      if (mbsinit(ps))
+	{
+	  if (**src == '\0')
+	    {
+	      *dest = L'\0';
+	      *src = NULL;
+	      return (wclength);
+	    }
+	  else if (**src == '\\')
+	    {
+	      *dest = L'\\';
+	      mblength = 1;
+	    }
+	  else
+	    mblength = mbrtowc(dest, *src, n, ps);
+	}
+      else
+	mblength = mbrtowc(dest, *src, n, ps);
+
+      /* Cannot convert multibyte character to wide character. */
+      if (mblength == (size_t)-1 || mblength == (size_t)-2)
+	return (size_t)-1;
+
+      *src += mblength;
+      n -= mblength;
+
+      /* The multibyte string  has  been  completely  converted,
+	 including  the terminating '\0'. */
+      if (*dest == L'\0')
+	{
+	  *src = NULL;
+	  break;
+	}
+    }
+
+    return (wclength);
+}
+
+#if HAVE_MBSNRTOWCS
+/* Convert a multibyte string to a wide character string. Memory for the
+   new wide character string is obtained with malloc.
+
+   Fast multiple-character version of xdupmbstowcs used when the indices are
+   not required and mbsnrtowcs is available. */
+
+static size_t
+xdupmbstowcs2 (destp, src)
+    wchar_t **destp;	/* Store the pointer to the wide character string */
+    const char *src;	/* Multibyte character string */
+{
+  const char *p;	/* Conversion start position of src */
+  wchar_t *wsbuf;	/* Buffer for wide characters. */
+  size_t wsbuf_size;	/* Size of WSBUF */
+  size_t wcnum;		/* Number of wide characters in WSBUF */
+  mbstate_t state;	/* Conversion State */
+  size_t n, wcslength;	/* Number of wide characters produced by the conversion. */
+  const char *end_or_backslash;
+  size_t nms;	/* Number of multibyte characters to convert at one time. */
+  mbstate_t tmp_state;
+  const char *tmp_p;
+
+  memset (&state, '\0', sizeof(mbstate_t));
+
+  wsbuf_size = 0;
+  wsbuf = NULL;
+
+  p = src;
+  wcnum = 0;
+  do
+    {
+      end_or_backslash = strchrnul(p, '\\');
+      nms = end_or_backslash - p;
+      if (*end_or_backslash == '\0')
+	nms++;
+
+      /* Compute the number of produced wide-characters. */
+      tmp_p = p;
+      tmp_state = state;
+
+      if (nms == 0 && *p == '\\')	/* special initial case */
+	nms = wcslength = 1;
+      else
+	wcslength = mbsnrtowcs (NULL, &tmp_p, nms, 0, &tmp_state);
+
+      if (wcslength == 0)
+	{
+	  tmp_p = p;		/* will need below */
+	  tmp_state = state;
+	  wcslength = 1;	/* take a single byte */
+	}
+
+      /* Conversion failed. */
+      if (wcslength == (size_t)-1)
+	{
+	  free (wsbuf);
+	  *destp = NULL;
+	  return (size_t)-1;
+	}
+
+      /* Resize the buffer if it is not large enough. */
+      if (wsbuf_size < wcnum+wcslength+1)	/* 1 for the L'\0' or the potential L'\\' */
+	{
+	  wchar_t *wstmp;
+
+	  while (wsbuf_size < wcnum+wcslength+1) /* 1 for the L'\0' or the potential L'\\' */
+	    wsbuf_size += WSBUF_INC;
+
+	  wstmp = (wchar_t *) realloc (wsbuf, wsbuf_size * sizeof (wchar_t));
+	  if (wstmp == NULL)
+	    {
+	      free (wsbuf);
+	      *destp = NULL;
+	      return (size_t)-1;
+	    }
+	  wsbuf = wstmp;
+	}
+
+      /* Perform the conversion. This is assumed to return 'wcslength'.
+	 It may set 'p' to NULL. */
+      n = mbsnrtowcs(wsbuf+wcnum, &p, nms, wsbuf_size-wcnum, &state);
+
+      if (n == 0 && p == 0)
+	{
+	  wsbuf[wcnum] = L'\0';
+	  break;
+	}
+
+      /* Compensate for taking single byte on wcs conversion failure above. */
+      if (wcslength == 1 && (n == 0 || n == (size_t)-1))
+	{
+	  state = tmp_state;
+	  p = tmp_p;
+	  wsbuf[wcnum] = *p;
+	  if (*p == 0)
+	    break;
+	  else
+	    {
+	      wcnum++; p++;
+	    }
+	}
+      else
+        wcnum += wcslength;
+
+      if (mbsinit (&state) && (p != NULL) && (*p == '\\'))
+	{
+	  wsbuf[wcnum++] = L'\\';
+	  p++;
+	}
+    }
+  while (p != NULL);
+
+  *destp = wsbuf;
+
+  /* Return the length of the wide character string, not including `\0'. */
+  return wcnum;
+}
+#endif /* HAVE_MBSNRTOWCS */
+
+/* Convert a multibyte string to a wide character string. Memory for the
+   new wide character string is obtained with malloc.
+
+   The return value is the length of the wide character string. Returns a
+   pointer to the wide character string in DESTP. If INDICESP is not NULL,
+   INDICESP stores the pointer to the pointer array. Each pointer is to
+   the first byte of each multibyte character. Memory for the pointer array
+   is obtained with malloc, too.
+   If conversion is failed, the return value is (size_t)-1 and the values
+   of DESTP and INDICESP are NULL. */
+
+size_t
+xdupmbstowcs (destp, indicesp, src)
+    wchar_t **destp;	/* Store the pointer to the wide character string */
+    char ***indicesp;	/* Store the pointer to the pointer array. */
+    const char *src;	/* Multibyte character string */
+{
+  const char *p;	/* Conversion start position of src */
+  wchar_t wc;		/* Created wide character by conversion */
+  wchar_t *wsbuf;	/* Buffer for wide characters. */
+  char **indices; 	/* Buffer for indices. */
+  size_t wsbuf_size;	/* Size of WSBUF */
+  size_t wcnum;		/* Number of wide characters in WSBUF */
+  mbstate_t state;	/* Conversion State */
+
+  /* In case SRC or DESP is NULL, conversion doesn't take place. */
+  if (src == NULL || destp == NULL)
+    {
+      if (destp)
+	*destp = NULL;
+      if (indicesp)
+	*indicesp = NULL;
+      return (size_t)-1;
+    }
+
+#if HAVE_MBSNRTOWCS
+  if (indicesp == NULL)
+    return (xdupmbstowcs2 (destp, src));
+#endif
+
+  memset (&state, '\0', sizeof(mbstate_t));
+  wsbuf_size = WSBUF_INC;
+
+  wsbuf = (wchar_t *) malloc (wsbuf_size * sizeof(wchar_t));
+  if (wsbuf == NULL)
+    {
+      *destp = NULL;
+      if (indicesp)
+        *indicesp = NULL;
+      return (size_t)-1;
+    }
+
+  indices = NULL;
+  if (indicesp)
+    {
+      indices = (char **) malloc (wsbuf_size * sizeof(char *));
+      if (indices == NULL)
+	{
+	  free (wsbuf);
+	  *destp = NULL;
+	  *indicesp = NULL;
+	  return (size_t)-1;
+	}
+    }
+
+  p = src;
+  wcnum = 0;
+  do
+    {
+      size_t mblength;	/* Byte length of one multibyte character. */
+
+      if (mbsinit (&state))
+	{
+	  if (*p == '\0')
+	    {
+	      wc = L'\0';
+	      mblength = 1;
+	    }
+	  else if (*p == '\\')
+	    {
+	      wc = L'\\';
+	      mblength = 1;
+	    }
+	  else
+	    mblength = mbrtowc(&wc, p, MB_LEN_MAX, &state);
+	}
+      else
+	mblength = mbrtowc(&wc, p, MB_LEN_MAX, &state);
+
+      /* Conversion failed. */
+      if (MB_INVALIDCH (mblength))
+	{
+	  free (wsbuf);
+	  FREE (indices);
+	  *destp = NULL;
+	  if (indicesp)
+	    *indicesp = NULL;
+	  return (size_t)-1;
+	}
+
+      ++wcnum;
+
+      /* Resize buffers when they are not large enough. */
+      if (wsbuf_size < wcnum)
+	{
+	  wchar_t *wstmp;
+	  char **idxtmp;
+
+	  wsbuf_size += WSBUF_INC;
+
+	  wstmp = (wchar_t *) realloc (wsbuf, wsbuf_size * sizeof (wchar_t));
+	  if (wstmp == NULL)
+	    {
+	      free (wsbuf);
+	      FREE (indices);
+	      *destp = NULL;
+	      if (indicesp)
+		*indicesp = NULL;
+	      return (size_t)-1;
+	    }
+	  wsbuf = wstmp;
+
+	  if (indicesp)
+	    {
+	      idxtmp = (char **) realloc (indices, wsbuf_size * sizeof (char *));
+	      if (idxtmp == NULL)
+		{
+		  free (wsbuf);
+		  free (indices);
+		  *destp = NULL;
+		  if (indicesp)
+		    *indicesp = NULL;
+		  return (size_t)-1;
+		}
+	      indices = idxtmp;
+	    }
+	}
+
+      wsbuf[wcnum - 1] = wc;
+      if (indices)
+        indices[wcnum - 1] = (char *)p;
+      p += mblength;
+    }
+  while (MB_NULLWCH (wc) == 0);
+
+  /* Return the length of the wide character string, not including `\0'. */
+  *destp = wsbuf;
+  if (indicesp != NULL)
+    *indicesp = indices;
+
+  return (wcnum - 1);
+}
+
+/* Convert wide character string to multibyte character string. Treat invalid
+   wide characters as bytes.  Used only in unusual circumstances.
+
+   Written by Bruno Haible <bruno@clisp.org>, 2008, adapted by Chet Ramey
+   for use in Bash. */
+
+/* Convert wide character string *SRCP to a multibyte character string and
+   store the result in DEST. Store at most LEN bytes in DEST. */
+size_t
+xwcsrtombs (char *dest, const wchar_t **srcp, size_t len, mbstate_t *ps)
+{
+  const wchar_t *src;
+  size_t cur_max;			/* XXX - locale_cur_max */
+  char buf[64], *destptr, *tmp_dest;
+  unsigned char uc;
+  mbstate_t prev_state;
+
+  cur_max = MB_CUR_MAX;
+  if (cur_max > sizeof (buf))		/* Holy cow. */
+    return (size_t)-1;
+
+  src = *srcp;
+
+  if (dest != NULL)
+    {
+      destptr = dest;
+
+      for (; len > 0; src++)
+	{
+	  wchar_t wc;
+	  size_t ret;
+
+	  wc = *src;
+	  /* If we have room, store directly into DEST. */
+	  tmp_dest = destptr;
+	  ret = wcrtomb (len >= cur_max ? destptr : buf, wc, ps);
+
+	  if (ret == (size_t)(-1))		/* XXX */
+	    {
+	      /* Since this is used for globbing and other uses of filenames,
+		 treat invalid wide character sequences as bytes.  This is
+		 intended to be symmetric with xdupmbstowcs2. */
+handle_byte:
+	      destptr = tmp_dest;	/* in case wcrtomb modified it */
+	      uc = wc;
+	      ret = 1;
+	      if (len >= cur_max)
+		*destptr = uc;
+	      else
+		buf[0] = uc;
+	      if (ps)
+		memset (ps, 0, sizeof (mbstate_t));
+	    }
+
+	  if (ret > cur_max)		/* Holy cow */
+	    goto bad_input;
+
+	  if (len < ret)
+	    break;
+
+	  if (len < cur_max)
+	    memcpy (destptr, buf, ret);
+
+	  if (wc == 0)
+	    {
+	      src = NULL;
+	      /* Here mbsinit (ps).  */
+	      break;
+	    }
+	  destptr += ret;
+	  len -= ret;
+	}
+      *srcp = src;
+      return destptr - dest;
+    }
+  else
+    {
+      /* Ignore dest and len, don't store *srcp at the end, and
+	 don't clobber *ps.  */
+      mbstate_t state = *ps;
+      size_t totalcount = 0;
+
+      for (;; src++)
+	{
+	  wchar_t wc;
+	  size_t ret;
+
+	  wc = *src;
+	  ret = wcrtomb (buf, wc, &state);
+
+	  if (ret == (size_t)(-1))
+	    goto bad_input2;
+	  if (wc == 0)
+	    {
+	      /* Here mbsinit (&state).  */
+	      break;
+	    }
+	  totalcount += ret;
+	}
+      return totalcount;
+    }
+
+bad_input:
+  *srcp = src;
+bad_input2:
+  errno = EILSEQ;
+  return (size_t)(-1);
+}
+
+#endif /* HANDLE_MULTIBYTE */
diff --git a/lib/intl/ChangeLog b/lib/intl/ChangeLog
new file mode 100644
index 0000000..eed2d21
--- /dev/null
+++ b/lib/intl/ChangeLog
@@ -0,0 +1,4 @@
+2003-05-22  GNU  <bug-gnu-gettext@gnu.org>
+
+	* Version 0.12.1 released.
+
diff --git a/lib/intl/Makefile.in b/lib/intl/Makefile.in
new file mode 100644
index 0000000..00fdb61
--- /dev/null
+++ b/lib/intl/Makefile.in
@@ -0,0 +1,472 @@
+# Makefile for directory with message catalog handling library of GNU gettext
+# Copyright (C) 1995-1998, 2000-2003, 2008,2009 Free Software Foundation, Inc.
+#
+
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+PACKAGE = @PACKAGE_NAME@
+VERSION = @PACKAGE_VERSION@
+
+SHELL = /bin/sh
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+top_builddir = @BUILD_DIR@
+VPATH = $(srcdir)
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+transform = @program_transform_name@
+
+datarootdir = @datarootdir@
+
+libdir = @libdir@
+includedir = @includedir@
+datadir = @datadir@
+localedir = @localedir@
+
+gettextsrcdir = $(datadir)/gettext/intl
+aliaspath = $(localedir)
+subdir = intl
+
+@SET_MAKE@
+
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+mkinstalldirs = $(SHELL) $(MKINSTALLDIRS)
+
+l = @INTL_LIBTOOL_SUFFIX_PREFIX@
+
+AR = @AR@
+CC = @CC@
+LIBTOOL = @LIBTOOL@
+RANLIB = @RANLIB@
+YACC = @INTLBISON@ -y -d
+YFLAGS = --name-prefix=__gettext
+
+ARFLAGS = @ARFLAGS@
+
+LOCAL_DEFS = @LOCAL_DEFS@
+
+DEFS = -DLOCALEDIR=\"$(localedir)\" -DLOCALE_ALIAS_PATH=\"$(aliaspath)\" \
+-DLIBDIR=\"$(prefix)/libdata\" -DIN_LIBINTL \
+-DENABLE_RELOCATABLE=1 -DIN_LIBRARY -DINSTALLDIR=\"$(libdir)\" -DNO_XMALLOC \
+-Dset_relocation_prefix=libintl_set_relocation_prefix \
+-Drelocate=libintl_relocate \
+-DDEPENDS_ON_LIBICONV=1 @DEFS@ ${LOCAL_DEFS}
+CPPFLAGS = @CPPFLAGS@
+CFLAGS = @CFLAGS@
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+
+COMPILE = $(CC) -c $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS) $(XCFLAGS)
+
+HEADERS = \
+  gmo.h \
+  gettextP.h \
+  hash-string.h \
+  loadinfo.h \
+  plural-exp.h \
+  eval-plural.h \
+  localcharset.h \
+  relocatable.h \
+  os2compat.h \
+  libgnuintl.h.in
+SOURCES = \
+  bindtextdom.c \
+  dcgettext.c \
+  dgettext.c \
+  gettext.c \
+  finddomain.c \
+  loadmsgcat.c \
+  localealias.c \
+  textdomain.c \
+  l10nflist.c \
+  explodename.c \
+  dcigettext.c \
+  dcngettext.c \
+  dngettext.c \
+  ngettext.c \
+  plural.y \
+  plural-exp.c \
+  localcharset.c \
+  relocatable.c \
+  localename.c \
+  log.c \
+  osdep.c \
+  os2compat.c \
+  intl-compat.c
+OBJECTS = \
+  bindtextdom.$lo \
+  dcgettext.$lo \
+  dgettext.$lo \
+  gettext.$lo \
+  finddomain.$lo \
+  loadmsgcat.$lo \
+  localealias.$lo \
+  textdomain.$lo \
+  l10nflist.$lo \
+  explodename.$lo \
+  dcigettext.$lo \
+  dcngettext.$lo \
+  dngettext.$lo \
+  ngettext.$lo \
+  plural.$lo \
+  plural-exp.$lo \
+  localcharset.$lo \
+  relocatable.$lo \
+  localename.$lo \
+  log.$lo \
+  osdep.$lo \
+  intl-compat.$lo
+DISTFILES.common = Makefile.in \
+config.charset locale.alias ref-add.sin ref-del.sin $(HEADERS) $(SOURCES)
+DISTFILES.generated = plural.c
+DISTFILES.normal = VERSION
+DISTFILES.gettext = COPYING.LIB-2.0 COPYING.LIB-2.1 libintl.glibc \
+Makefile.vms libgnuintl.h.msvc-shared README.woe32 Makefile.msvc
+DISTFILES.obsolete = xopen-msg.sed linux-msg.sed po2tbl.sed.in cat-compat.c \
+COPYING.LIB-2 gettext.h libgettext.h plural-eval.c libgnuintl.h
+
+all: all-@USE_INCLUDED_LIBINTL@
+all-yes: libintl.$la libintl.h charset.alias ref-add.sed ref-del.sed
+all-no: all-no-@BUILD_INCLUDED_LIBINTL@
+all-no-yes: libgnuintl.$la
+all-no-no:
+
+libintl.a libgnuintl.a: $(OBJECTS)
+	rm -f $@
+	$(AR) $(ARFLAGS) $@ $(OBJECTS)
+	$(RANLIB) $@
+
+libintl.la libgnuintl.la: $(OBJECTS)
+	$(LIBTOOL) --mode=link \
+	  $(CC) $(CPPFLAGS) $(CFLAGS) $(XCFLAGS) $(LDFLAGS) -o $@ \
+	  $(OBJECTS) @LTLIBICONV@ $(LIBS) \
+	  -version-info $(LTV_CURRENT):$(LTV_REVISION):$(LTV_AGE) \
+	  -rpath $(libdir) \
+	  -no-undefined
+
+# Libtool's library version information for libintl.
+# Before making a gettext release, the gettext maintainer must change this
+# according to the libtool documentation, section "Library interface versions".
+# Maintainers of other packages that include the intl directory must *not*
+# change these values.
+LTV_CURRENT=5
+LTV_REVISION=0
+LTV_AGE=3
+
+.SUFFIXES:
+.SUFFIXES: .c .y .o .lo .sin .sed
+
+.c.o:
+	$(COMPILE) $<
+
+.y.c:
+	$(YACC) $(YFLAGS) --output $@ $<
+	rm -f $*.h
+
+bindtextdom.lo: $(srcdir)/bindtextdom.c
+	$(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/bindtextdom.c
+dcgettext.lo: $(srcdir)/dcgettext.c
+	$(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/dcgettext.c
+dgettext.lo: $(srcdir)/dgettext.c
+	$(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/dgettext.c
+gettext.lo: $(srcdir)/gettext.c
+	$(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/gettext.c
+finddomain.lo: $(srcdir)/finddomain.c
+	$(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/finddomain.c
+loadmsgcat.lo: $(srcdir)/loadmsgcat.c
+	$(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/loadmsgcat.c
+localealias.lo: $(srcdir)/localealias.c
+	$(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/localealias.c
+textdomain.lo: $(srcdir)/textdomain.c
+	$(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/textdomain.c
+l10nflist.lo: $(srcdir)/l10nflist.c
+	$(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/l10nflist.c
+explodename.lo: $(srcdir)/explodename.c
+	$(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/explodename.c
+dcigettext.lo: $(srcdir)/dcigettext.c
+	$(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/dcigettext.c
+dcngettext.lo: $(srcdir)/dcngettext.c
+	$(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/dcngettext.c
+dngettext.lo: $(srcdir)/dngettext.c
+	$(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/dngettext.c
+ngettext.lo: $(srcdir)/ngettext.c
+	$(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/ngettext.c
+plural.lo: $(srcdir)/plural.c
+	$(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/plural.c
+plural-exp.lo: $(srcdir)/plural-exp.c
+	$(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/plural-exp.c
+localcharset.lo: $(srcdir)/localcharset.c
+	$(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/localcharset.c
+relocatable.lo: $(srcdir)/relocatable.c
+	$(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/relocatable.c
+localename.lo: $(srcdir)/localename.c
+	$(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/localename.c
+log.lo: $(srcdir)/log.c
+	$(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/log.c
+osdep.lo: $(srcdir)/osdep.c
+	$(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/osdep.c
+intl-compat.lo: $(srcdir)/intl-compat.c
+	$(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/intl-compat.c
+
+ref-add.sed: $(srcdir)/ref-add.sin
+	sed -e '/^#/d' -e 's/@''PACKAGE''@/@PACKAGE@/g' $(srcdir)/ref-add.sin > t-ref-add.sed
+	mv t-ref-add.sed ref-add.sed
+ref-del.sed: $(srcdir)/ref-del.sin
+	sed -e '/^#/d' -e 's/@''PACKAGE''@/@PACKAGE@/g' $(srcdir)/ref-del.sin > t-ref-del.sed
+	mv t-ref-del.sed ref-del.sed
+
+INCLUDES = -I. -I$(srcdir) -I${top_builddir} -I${top_srcdir}
+
+libgnuintl.h: $(srcdir)/libgnuintl.h.in
+	cp $(srcdir)/libgnuintl.h.in libgnuintl.h
+
+libintl.h: libgnuintl.h
+	cmp libgnuintl.h libintl.h || cp libgnuintl.h libintl.h
+
+charset.alias: $(srcdir)/config.charset
+	$(SHELL) $(srcdir)/config.charset '@host@' > t-$@
+	mv t-$@ $@
+
+check: all
+
+# We must not install the libintl.h/libintl.a files if we are on a
+# system which has the GNU gettext() function in its C library or in a
+# separate library.
+# If you want to use the one which comes with this version of the
+# package, you have to use `configure --with-included-gettext'.
+install: install-exec install-data
+install-exec: all
+	if { test "$(PACKAGE)" = "gettext-runtime" || test "$(PACKAGE)" = "gettext-tools"; } \
+	   && test '@USE_INCLUDED_LIBINTL@' = yes; then \
+	  $(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(includedir); \
+	  $(INSTALL_DATA) libintl.h $(DESTDIR)$(includedir)/libintl.h; \
+	  $(LIBTOOL) --mode=install \
+	    $(INSTALL_DATA) libintl.$la $(DESTDIR)$(libdir)/libintl.$la; \
+	  if test "@RELOCATABLE@" = yes; then \
+	    dependencies=`sed -n -e 's,^dependency_libs=\(.*\),\1,p' < $(DESTDIR)$(libdir)/libintl.la | sed -e "s,^',," -e "s,'\$$,,"`; \
+	    if test -n "$dependencies"; then \
+	      rm -f $(DESTDIR)$(libdir)/libintl.la; \
+	    fi; \
+	  fi; \
+	else \
+	  : ; \
+	fi
+	if test "$(PACKAGE)" = "gettext-tools" \
+	   && test '@USE_INCLUDED_LIBINTL@' = no; then \
+	  $(mkinstalldirs) $(DESTDIR)$(libdir); \
+	  $(LIBTOOL) --mode=install \
+	    $(INSTALL_DATA) libgnuintl.$la $(DESTDIR)$(libdir)/libgnuintl.$la; \
+	  rm -f $(DESTDIR)$(libdir)/preloadable_libintl.so; \
+	  $(INSTALL_DATA) $(DESTDIR)$(libdir)/libgnuintl.so $(DESTDIR)$(libdir)/preloadable_libintl.so; \
+	  $(LIBTOOL) --mode=uninstall \
+	    rm -f $(DESTDIR)$(libdir)/libgnuintl.$la; \
+	else \
+	  : ; \
+	fi
+	if test '@USE_INCLUDED_LIBINTL@' = yes; then \
+	  $(mkinstalldirs) $(DESTDIR)$(localedir); \
+	  test -f $(DESTDIR)$(localedir)/locale.alias \
+	    && orig=$(DESTDIR)$(localedir)/locale.alias \
+	    || orig=$(srcdir)/locale.alias; \
+	  temp=$(DESTDIR)$(localedir)/t-locale.alias; \
+	  dest=$(DESTDIR)$(localedir)/locale.alias; \
+	  sed -f ref-add.sed $$orig > $$temp; \
+	  $(INSTALL_DATA) $$temp $$dest; \
+	  rm -f $$temp; \
+	else \
+	  : ; \
+	fi
+install-data: all
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
+	  $(INSTALL_DATA) VERSION $(DESTDIR)$(gettextsrcdir)/VERSION; \
+	  $(INSTALL_DATA) ChangeLog.inst $(DESTDIR)$(gettextsrcdir)/ChangeLog; \
+	  dists="COPYING.LIB-2.0 COPYING.LIB-2.1 $(DISTFILES.common)"; \
+	  for file in $$dists; do \
+	    $(INSTALL_DATA) $(srcdir)/$$file \
+			    $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	  chmod a+x $(DESTDIR)$(gettextsrcdir)/config.charset; \
+	  dists="$(DISTFILES.generated)"; \
+	  for file in $$dists; do \
+	    if test -f $$file; then dir=.; else dir=$(srcdir); fi; \
+	    $(INSTALL_DATA) $$dir/$$file \
+			    $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	  dists="$(DISTFILES.obsolete)"; \
+	  for file in $$dists; do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	else \
+	  : ; \
+	fi
+
+install-strip: install
+
+installdirs:
+	if { test "$(PACKAGE)" = "gettext-runtime" || test "$(PACKAGE)" = "gettext-tools"; } \
+	   && test '@USE_INCLUDED_LIBINTL@' = yes; then \
+	  $(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(includedir); \
+	else \
+	  : ; \
+	fi
+	if test "$(PACKAGE)" = "gettext-tools" \
+	   && test '@USE_INCLUDED_LIBINTL@' = no; then \
+	  $(mkinstalldirs) $(DESTDIR)$(libdir); \
+	else \
+	  : ; \
+	fi
+	if test '@USE_INCLUDED_LIBINTL@' = yes; then \
+	  test @GLIBC21@ != no || $(mkinstalldirs) $(DESTDIR)$(libdir); \
+	  $(mkinstalldirs) $(DESTDIR)$(localedir); \
+	else \
+	  : ; \
+	fi
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
+	else \
+	  : ; \
+	fi
+
+# Define this as empty until I found a useful application.
+installcheck:
+
+uninstall:
+	if { test "$(PACKAGE)" = "gettext-runtime" || test "$(PACKAGE)" = "gettext-tools"; } \
+	   && test '@USE_INCLUDED_LIBINTL@' = yes; then \
+	  rm -f $(DESTDIR)$(includedir)/libintl.h; \
+	  $(LIBTOOL) --mode=uninstall \
+	    rm -f $(DESTDIR)$(libdir)/libintl.$la; \
+	else \
+	  : ; \
+	fi
+	if test "$(PACKAGE)" = "gettext-tools" \
+	   && test '@USE_INCLUDED_LIBINTL@' = no; then \
+	  rm -f $(DESTDIR)$(libdir)/preloadable_libintl.so; \
+	else \
+	  : ; \
+	fi
+	if test '@USE_INCLUDED_LIBINTL@' = yes; then \
+	  if test -f $(DESTDIR)$(prefix)/libdata/charset.alias; then \
+	    temp=$(DESTDIR)$(prefix)/libdata/t-charset.alias; \
+	    dest=$(DESTDIR)$(prefix)/libdata/charset.alias; \
+	    sed -f ref-del.sed $$dest > $$temp; \
+	    if grep '^# Packages using this file: $$' $$temp > /dev/null; then \
+	      rm -f $$dest; \
+	    else \
+	      $(INSTALL_DATA) $$temp $$dest; \
+	    fi; \
+	    rm -f $$temp; \
+	  fi; \
+	  if test -f $(DESTDIR)$(localedir)/locale.alias; then \
+	    temp=$(DESTDIR)$(localedir)/t-locale.alias; \
+	    dest=$(DESTDIR)$(localedir)/locale.alias; \
+	    sed -f ref-del.sed $$dest > $$temp; \
+	    if grep '^# Packages using this file: $$' $$temp > /dev/null; then \
+	      rm -f $$dest; \
+	    else \
+	      $(INSTALL_DATA) $$temp $$dest; \
+	    fi; \
+	    rm -f $$temp; \
+	  fi; \
+	else \
+	  : ; \
+	fi
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  for file in VERSION ChangeLog COPYING.LIB-2.0 COPYING.LIB-2.1 $(DISTFILES.common) $(DISTFILES.generated); do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	else \
+	  : ; \
+	fi
+
+info dvi ps pdf html:
+
+$(OBJECTS): ${top_builddir}/config.h libgnuintl.h
+bindtextdom.$lo dcgettext.$lo dcigettext.$lo dcngettext.$lo dgettext.$lo dngettext.$lo finddomain.$lo gettext.$lo intl-compat.$lo loadmsgcat.$lo localealias.$lo ngettext.$lo textdomain.$lo: $(srcdir)/gettextP.h $(srcdir)/gmo.h $(srcdir)/loadinfo.h
+dcigettext.$lo loadmsgcat.$lo: $(srcdir)/hash-string.h
+explodename.$lo l10nflist.$lo: $(srcdir)/loadinfo.h
+dcigettext.$lo loadmsgcat.$lo plural.$lo plural-exp.$lo: $(srcdir)/plural-exp.h
+dcigettext.$lo: $(srcdir)/eval-plural.h
+localcharset.$lo: $(srcdir)/localcharset.h
+localealias.$lo localcharset.$lo relocatable.$lo: $(srcdir)/relocatable.h
+
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES)
+	here=`pwd`; cd $(srcdir) && etags -o $$here/TAGS $(HEADERS) $(SOURCES)
+
+ctags: CTAGS
+
+CTAGS: $(HEADERS) $(SOURCES)
+	here=`pwd`; cd $(srcdir) && ctags -o $$here/CTAGS $(HEADERS) $(SOURCES)
+
+id: ID
+
+ID: $(HEADERS) $(SOURCES)
+	here=`pwd`; cd $(srcdir) && mkid -f$$here/ID $(HEADERS) $(SOURCES)
+
+
+mostlyclean:
+	rm -f *.a *.la *.o *.obj *.lo core core.*
+	rm -f libgnuintl.h libintl.h charset.alias ref-add.sed ref-del.sed
+	rm -f -r .libs _libs
+
+clean: mostlyclean
+
+distclean: clean
+	rm -f Makefile ID TAGS
+	if test "$(PACKAGE)" = "gettext-runtime" || test "$(PACKAGE)" = "gettext-tools"; then \
+	  rm -f ChangeLog.inst $(DISTFILES.normal); \
+	else \
+	  : ; \
+	fi
+
+maintainer-clean: distclean
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+
+# GNU gettext needs not contain the file `VERSION' but contains some
+# other files which should not be distributed in other packages.
+distdir = ../$(PACKAGE)-$(VERSION)/$(subdir)
+dist distdir: Makefile
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  : ; \
+	else \
+	  if test "$(PACKAGE)" = "gettext-runtime"; then \
+	    additional="$(DISTFILES.gettext)"; \
+	  else \
+	    additional="$(DISTFILES.normal)"; \
+	  fi; \
+	  $(MAKE) $(DISTFILES.common) $(DISTFILES.generated) $$additional; \
+	  for file in ChangeLog $(DISTFILES.common) $(DISTFILES.generated) $$additional; do \
+	    if test -f $$file; then dir=.; else dir=$(srcdir); fi; \
+	    cp -p $$dir/$$file $(distdir); \
+	  done; \
+	fi
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status
+# This would be more efficient, but doesn't work any more with autoconf-2.57,
+# when AC_CONFIG_FILES([intl/Makefile:somedir/Makefile.in]) is used.
+#	cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+# Tell versions [3.59,3.63) of GNU make not to export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/lib/intl/VERSION b/lib/intl/VERSION
new file mode 100644
index 0000000..1303183
--- /dev/null
+++ b/lib/intl/VERSION
@@ -0,0 +1 @@
+GNU gettext library from gettext-0.12.1
diff --git a/lib/intl/bindtextdom.c b/lib/intl/bindtextdom.c
new file mode 100644
index 0000000..ef5479e
--- /dev/null
+++ b/lib/intl/bindtextdom.c
@@ -0,0 +1,376 @@
+/* bindtextdom.c - Implementation of the bindtextdomain(3) function */
+
+/* Copyright (C) 1995-1998, 2000, 2001, 2002, 2005-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include <stddef.h>
+#include <stdlib.h>
+#include <string.h>
+
+#ifdef _LIBC
+# include <libintl.h>
+#else
+# include "libgnuintl.h"
+#endif
+#include "gettextP.h"
+
+#ifdef _LIBC
+/* We have to handle multi-threaded applications.  */
+# include <bits/libc-lock.h>
+#else
+/* Provide dummy implementation if this is outside glibc.  */
+# define __libc_rwlock_define(CLASS, NAME)
+# define __libc_rwlock_wrlock(NAME)
+# define __libc_rwlock_unlock(NAME)
+#endif
+
+/* The internal variables in the standalone libintl.a must have different
+   names than the internal variables in GNU libc, otherwise programs
+   using libintl.a cannot be linked statically.  */
+#if !defined _LIBC
+# define _nl_default_dirname libintl_nl_default_dirname
+# define _nl_domain_bindings libintl_nl_domain_bindings
+#endif
+
+/* Some compilers, like SunOS4 cc, don't have offsetof in <stddef.h>.  */
+#ifndef offsetof
+# define offsetof(type,ident) ((size_t)&(((type*)0)->ident))
+#endif
+
+/* @@ end of prolog @@ */
+
+/* Contains the default location of the message catalogs.  */
+extern const char _nl_default_dirname[];
+#ifdef _LIBC
+extern const char _nl_default_dirname_internal[] attribute_hidden;
+#else
+# define INTUSE(name) name
+#endif
+
+/* List with bindings of specific domains.  */
+extern struct binding *_nl_domain_bindings;
+
+/* Lock variable to protect the global data in the gettext implementation.  */
+__libc_rwlock_define (extern, _nl_state_lock attribute_hidden)
+
+
+/* Names for the libintl functions are a problem.  They must not clash
+   with existing names and they should follow ANSI C.  But this source
+   code is also used in GNU C Library where the names have a __
+   prefix.  So we have to make a difference here.  */
+#ifdef _LIBC
+# define BINDTEXTDOMAIN __bindtextdomain
+# define BIND_TEXTDOMAIN_CODESET __bind_textdomain_codeset
+# ifndef strdup
+#  define strdup(str) __strdup (str)
+# endif
+#else
+# define BINDTEXTDOMAIN libintl_bindtextdomain
+# define BIND_TEXTDOMAIN_CODESET libintl_bind_textdomain_codeset
+#endif
+
+/* Prototypes for local functions.  */
+static void set_binding_values PARAMS ((const char *domainname,
+					const char **dirnamep,
+					const char **codesetp));
+
+/* Specifies the directory name *DIRNAMEP and the output codeset *CODESETP
+   to be used for the DOMAINNAME message catalog.
+   If *DIRNAMEP or *CODESETP is NULL, the corresponding attribute is not
+   modified, only the current value is returned.
+   If DIRNAMEP or CODESETP is NULL, the corresponding attribute is neither
+   modified nor returned.  */
+static void
+set_binding_values (domainname, dirnamep, codesetp)
+     const char *domainname;
+     const char **dirnamep;
+     const char **codesetp;
+{
+  struct binding *binding;
+  int modified;
+
+  /* Some sanity checks.  */
+  if (domainname == NULL || domainname[0] == '\0')
+    {
+      if (dirnamep)
+	*dirnamep = NULL;
+      if (codesetp)
+	*codesetp = NULL;
+      return;
+    }
+
+  __libc_rwlock_wrlock (_nl_state_lock);
+
+  modified = 0;
+
+  for (binding = _nl_domain_bindings; binding != NULL; binding = binding->next)
+    {
+      int compare = strcmp (domainname, binding->domainname);
+      if (compare == 0)
+	/* We found it!  */
+	break;
+      if (compare < 0)
+	{
+	  /* It is not in the list.  */
+	  binding = NULL;
+	  break;
+	}
+    }
+
+  if (binding != NULL)
+    {
+      if (dirnamep)
+	{
+	  const char *dirname = *dirnamep;
+
+	  if (dirname == NULL)
+	    /* The current binding has be to returned.  */
+	    *dirnamep = binding->dirname;
+	  else
+	    {
+	      /* The domain is already bound.  If the new value and the old
+		 one are equal we simply do nothing.  Otherwise replace the
+		 old binding.  */
+	      char *result = binding->dirname;
+	      if (strcmp (dirname, result) != 0)
+		{
+		  if (strcmp (dirname, INTUSE(_nl_default_dirname)) == 0)
+		    result = (char *) INTUSE(_nl_default_dirname);
+		  else
+		    {
+#if defined _LIBC || defined HAVE_STRDUP
+		      result = strdup (dirname);
+#else
+		      size_t len = strlen (dirname) + 1;
+		      result = (char *) malloc (len);
+		      if (__builtin_expect (result != NULL, 1))
+			memcpy (result, dirname, len);
+#endif
+		    }
+
+		  if (__builtin_expect (result != NULL, 1))
+		    {
+		      if (binding->dirname != INTUSE(_nl_default_dirname))
+			free (binding->dirname);
+
+		      binding->dirname = result;
+		      modified = 1;
+		    }
+		}
+	      *dirnamep = result;
+	    }
+	}
+
+      if (codesetp)
+	{
+	  const char *codeset = *codesetp;
+
+	  if (codeset == NULL)
+	    /* The current binding has be to returned.  */
+	    *codesetp = binding->codeset;
+	  else
+	    {
+	      /* The domain is already bound.  If the new value and the old
+		 one are equal we simply do nothing.  Otherwise replace the
+		 old binding.  */
+	      char *result = binding->codeset;
+	      if (result == NULL || strcmp (codeset, result) != 0)
+		{
+#if defined _LIBC || defined HAVE_STRDUP
+		  result = strdup (codeset);
+#else
+		  size_t len = strlen (codeset) + 1;
+		  result = (char *) malloc (len);
+		  if (__builtin_expect (result != NULL, 1))
+		    memcpy (result, codeset, len);
+#endif
+
+		  if (__builtin_expect (result != NULL, 1))
+		    {
+		      if (binding->codeset != NULL)
+			free (binding->codeset);
+
+		      binding->codeset = result;
+		      binding->codeset_cntr++;
+		      modified = 1;
+		    }
+		}
+	      *codesetp = result;
+	    }
+	}
+    }
+  else if ((dirnamep == NULL || *dirnamep == NULL)
+	   && (codesetp == NULL || *codesetp == NULL))
+    {
+      /* Simply return the default values.  */
+      if (dirnamep)
+	*dirnamep = INTUSE(_nl_default_dirname);
+      if (codesetp)
+	*codesetp = NULL;
+    }
+  else
+    {
+      /* We have to create a new binding.  */
+      size_t len = strlen (domainname) + 1;
+      struct binding *new_binding =
+	(struct binding *) malloc (offsetof (struct binding, domainname) + len);
+
+      if (__builtin_expect (new_binding == NULL, 0))
+	goto failed;
+
+      memcpy (new_binding->domainname, domainname, len);
+
+      if (dirnamep)
+	{
+	  const char *dirname = *dirnamep;
+
+	  if (dirname == NULL)
+	    /* The default value.  */
+	    dirname = INTUSE(_nl_default_dirname);
+	  else
+	    {
+	      if (strcmp (dirname, INTUSE(_nl_default_dirname)) == 0)
+		dirname = INTUSE(_nl_default_dirname);
+	      else
+		{
+		  char *result;
+#if defined _LIBC || defined HAVE_STRDUP
+		  result = strdup (dirname);
+		  if (__builtin_expect (result == NULL, 0))
+		    goto failed_dirname;
+#else
+		  size_t len = strlen (dirname) + 1;
+		  result = (char *) malloc (len);
+		  if (__builtin_expect (result == NULL, 0))
+		    goto failed_dirname;
+		  memcpy (result, dirname, len);
+#endif
+		  dirname = result;
+		}
+	    }
+	  *dirnamep = dirname;
+	  new_binding->dirname = (char *) dirname;
+	}
+      else
+	/* The default value.  */
+	new_binding->dirname = (char *) INTUSE(_nl_default_dirname);
+
+      new_binding->codeset_cntr = 0;
+
+      if (codesetp)
+	{
+	  const char *codeset = *codesetp;
+
+	  if (codeset != NULL)
+	    {
+	      char *result;
+
+#if defined _LIBC || defined HAVE_STRDUP
+	      result = strdup (codeset);
+	      if (__builtin_expect (result == NULL, 0))
+		goto failed_codeset;
+#else
+	      size_t len = strlen (codeset) + 1;
+	      result = (char *) malloc (len);
+	      if (__builtin_expect (result == NULL, 0))
+		goto failed_codeset;
+	      memcpy (result, codeset, len);
+#endif
+	      codeset = result;
+	      new_binding->codeset_cntr++;
+	    }
+	  *codesetp = codeset;
+	  new_binding->codeset = (char *) codeset;
+	}
+      else
+	new_binding->codeset = NULL;
+
+      /* Now enqueue it.  */
+      if (_nl_domain_bindings == NULL
+	  || strcmp (domainname, _nl_domain_bindings->domainname) < 0)
+	{
+	  new_binding->next = _nl_domain_bindings;
+	  _nl_domain_bindings = new_binding;
+	}
+      else
+	{
+	  binding = _nl_domain_bindings;
+	  while (binding->next != NULL
+		 && strcmp (domainname, binding->next->domainname) > 0)
+	    binding = binding->next;
+
+	  new_binding->next = binding->next;
+	  binding->next = new_binding;
+	}
+
+      modified = 1;
+
+      /* Here we deal with memory allocation failures.  */
+      if (0)
+	{
+	failed_codeset:
+	  if (new_binding->dirname != INTUSE(_nl_default_dirname))
+	    free (new_binding->dirname);
+	failed_dirname:
+	  free (new_binding);
+	failed:
+	  if (dirnamep)
+	    *dirnamep = NULL;
+	  if (codesetp)
+	    *codesetp = NULL;
+	}
+    }
+
+  /* If we modified any binding, we flush the caches.  */
+  if (modified)
+    ++_nl_msg_cat_cntr;
+
+  __libc_rwlock_unlock (_nl_state_lock);
+}
+
+/* Specify that the DOMAINNAME message catalog will be found
+   in DIRNAME rather than in the system locale data base.  */
+char *
+BINDTEXTDOMAIN (domainname, dirname)
+     const char *domainname;
+     const char *dirname;
+{
+  set_binding_values (domainname, &dirname, NULL);
+  return (char *) dirname;
+}
+
+/* Specify the character encoding in which the messages from the
+   DOMAINNAME message catalog will be returned.  */
+char *
+BIND_TEXTDOMAIN_CODESET (domainname, codeset)
+     const char *domainname;
+     const char *codeset;
+{
+  set_binding_values (domainname, NULL, &codeset);
+  return (char *) codeset;
+}
+
+#ifdef _LIBC
+/* Aliases for function names in GNU C Library.  */
+weak_alias (__bindtextdomain, bindtextdomain);
+weak_alias (__bind_textdomain_codeset, bind_textdomain_codeset);
+#endif
diff --git a/lib/intl/config.charset b/lib/intl/config.charset
new file mode 100644
index 0000000..10c4439
--- /dev/null
+++ b/lib/intl/config.charset
@@ -0,0 +1,465 @@
+#! /bin/sh
+# Output a system dependent table of character encoding aliases.
+#
+#   Copyright (C) 2000-2009 Free Software Foundation, Inc.
+#
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# The table consists of lines of the form
+#    ALIAS  CANONICAL
+#
+# ALIAS is the (system dependent) result of "nl_langinfo (CODESET)".
+# ALIAS is compared in a case sensitive way.
+#
+# CANONICAL is the GNU canonical name for this character encoding.
+# It must be an encoding supported by libiconv. Support by GNU libc is
+# also desirable. CANONICAL is case insensitive. Usually an upper case
+# MIME charset name is preferred.
+# The current list of GNU canonical charset names is as follows.
+#
+#       name                         used by which systems         a MIME name?
+#   ASCII, ANSI_X3.4-1968     glibc solaris freebsd
+#   ISO-8859-1                glibc aix hpux irix osf solaris freebsd   yes
+#   ISO-8859-2                glibc aix hpux irix osf solaris freebsd   yes
+#   ISO-8859-3                glibc solaris                             yes
+#   ISO-8859-4                osf solaris freebsd                       yes
+#   ISO-8859-5                glibc aix hpux irix osf solaris freebsd   yes
+#   ISO-8859-6                glibc aix hpux solaris                    yes
+#   ISO-8859-7                glibc aix hpux irix osf solaris           yes
+#   ISO-8859-8                glibc aix hpux osf solaris                yes
+#   ISO-8859-9                glibc aix hpux irix osf solaris           yes
+#   ISO-8859-13               glibc
+#   ISO-8859-14               glibc
+#   ISO-8859-15               glibc aix osf solaris freebsd
+#   KOI8-R                    glibc solaris freebsd                     yes
+#   KOI8-U                    glibc freebsd                             yes
+#   KOI8-T                    glibc
+#   CP437                     dos
+#   CP775                     dos
+#   CP850                     aix osf dos
+#   CP852                     dos
+#   CP855                     dos
+#   CP856                     aix
+#   CP857                     dos
+#   CP861                     dos
+#   CP862                     dos
+#   CP864                     dos
+#   CP865                     dos
+#   CP866                     freebsd dos
+#   CP869                     dos
+#   CP874                     woe32 dos
+#   CP922                     aix
+#   CP932                     aix woe32 dos
+#   CP943                     aix
+#   CP949                     osf woe32 dos
+#   CP950                     woe32 dos
+#   CP1046                    aix
+#   CP1124                    aix
+#   CP1125                    dos
+#   CP1129                    aix
+#   CP1250                    woe32
+#   CP1251                    glibc solaris woe32
+#   CP1252                    aix woe32
+#   CP1253                    woe32
+#   CP1254                    woe32
+#   CP1255                    glibc woe32
+#   CP1256                    woe32
+#   CP1257                    woe32
+#   GB2312                    glibc aix hpux irix solaris freebsd       yes
+#   EUC-JP                    glibc aix hpux irix osf solaris freebsd   yes
+#   EUC-KR                    glibc aix hpux irix osf solaris freebsd   yes
+#   EUC-TW                    glibc aix hpux irix osf solaris
+#   BIG5                      glibc aix hpux osf solaris freebsd        yes
+#   BIG5-HKSCS                glibc solaris
+#   GBK                       glibc aix osf solaris woe32 dos
+#   GB18030                   glibc solaris
+#   SHIFT_JIS                 hpux osf solaris freebsd                  yes
+#   JOHAB                     glibc solaris woe32
+#   TIS-620                   glibc aix hpux osf solaris
+#   VISCII                    glibc                                     yes
+#   TCVN5712-1                glibc
+#   GEORGIAN-PS               glibc
+#   HP-ROMAN8                 hpux
+#   HP-ARABIC8                hpux
+#   HP-GREEK8                 hpux
+#   HP-HEBREW8                hpux
+#   HP-TURKISH8               hpux
+#   HP-KANA8                  hpux
+#   DEC-KANJI                 osf
+#   DEC-HANYU                 osf
+#   UTF-8                     glibc aix hpux osf solaris                yes
+#
+# Note: Names which are not marked as being a MIME name should not be used in
+# Internet protocols for information interchange (mail, news, etc.).
+#
+# Note: ASCII and ANSI_X3.4-1968 are synonymous canonical names. Applications
+# must understand both names and treat them as equivalent.
+#
+# The first argument passed to this file is the canonical host specification,
+#    CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or
+#    CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+
+host="$1"
+os=`echo "$host" | sed -e 's/^[^-]*-[^-]*-\(.*\)$/\1/'`
+echo "# This file contains a table of character encoding aliases,"
+echo "# suitable for operating system '${os}'."
+echo "# It was automatically generated from config.charset."
+# List of references, updated during installation:
+echo "# Packages using this file: "
+case "$os" in
+    linux* | *-gnu*)
+	# With glibc-2.1 or newer, we don't need any canonicalization,
+	# because glibc has iconv and both glibc and libiconv support all
+	# GNU canonical names directly. Therefore, the Makefile does not
+	# need to install the alias file at all.
+	# The following applies only to glibc-2.0.x and older libcs.
+	echo "ISO_646.IRV:1983 ASCII"
+	;;
+    aix*)
+	echo "ISO8859-1 ISO-8859-1"
+	echo "ISO8859-2 ISO-8859-2"
+	echo "ISO8859-5 ISO-8859-5"
+	echo "ISO8859-6 ISO-8859-6"
+	echo "ISO8859-7 ISO-8859-7"
+	echo "ISO8859-8 ISO-8859-8"
+	echo "ISO8859-9 ISO-8859-9"
+	echo "ISO8859-15 ISO-8859-15"
+	echo "IBM-850 CP850"
+	echo "IBM-856 CP856"
+	echo "IBM-921 ISO-8859-13"
+	echo "IBM-922 CP922"
+	echo "IBM-932 CP932"
+	echo "IBM-943 CP943"
+	echo "IBM-1046 CP1046"
+	echo "IBM-1124 CP1124"
+	echo "IBM-1129 CP1129"
+	echo "IBM-1252 CP1252"
+	echo "IBM-eucCN GB2312"
+	echo "IBM-eucJP EUC-JP"
+	echo "IBM-eucKR EUC-KR"
+	echo "IBM-eucTW EUC-TW"
+	echo "big5 BIG5"
+	echo "GBK GBK"
+	echo "TIS-620 TIS-620"
+	echo "UTF-8 UTF-8"
+	;;
+    hpux*)
+	echo "iso88591 ISO-8859-1"
+	echo "iso88592 ISO-8859-2"
+	echo "iso88595 ISO-8859-5"
+	echo "iso88596 ISO-8859-6"
+	echo "iso88597 ISO-8859-7"
+	echo "iso88598 ISO-8859-8"
+	echo "iso88599 ISO-8859-9"
+	echo "iso885915 ISO-8859-15"
+	echo "roman8 HP-ROMAN8"
+	echo "arabic8 HP-ARABIC8"
+	echo "greek8 HP-GREEK8"
+	echo "hebrew8 HP-HEBREW8"
+	echo "turkish8 HP-TURKISH8"
+	echo "kana8 HP-KANA8"
+	echo "tis620 TIS-620"
+	echo "big5 BIG5"
+	echo "eucJP EUC-JP"
+	echo "eucKR EUC-KR"
+	echo "eucTW EUC-TW"
+	echo "hp15CN GB2312"
+	#echo "ccdc ?" # what is this?
+	echo "SJIS SHIFT_JIS"
+	echo "utf8 UTF-8"
+	;;
+    irix*)
+	echo "ISO8859-1 ISO-8859-1"
+	echo "ISO8859-2 ISO-8859-2"
+	echo "ISO8859-5 ISO-8859-5"
+	echo "ISO8859-7 ISO-8859-7"
+	echo "ISO8859-9 ISO-8859-9"
+	echo "eucCN GB2312"
+	echo "eucJP EUC-JP"
+	echo "eucKR EUC-KR"
+	echo "eucTW EUC-TW"
+	;;
+    osf*)
+	echo "ISO8859-1 ISO-8859-1"
+	echo "ISO8859-2 ISO-8859-2"
+	echo "ISO8859-4 ISO-8859-4"
+	echo "ISO8859-5 ISO-8859-5"
+	echo "ISO8859-7 ISO-8859-7"
+	echo "ISO8859-8 ISO-8859-8"
+	echo "ISO8859-9 ISO-8859-9"
+	echo "ISO8859-15 ISO-8859-15"
+	echo "cp850 CP850"
+	echo "big5 BIG5"
+	echo "dechanyu DEC-HANYU"
+	echo "dechanzi GB2312"
+	echo "deckanji DEC-KANJI"
+	echo "deckorean EUC-KR"
+	echo "eucJP EUC-JP"
+	echo "eucKR EUC-KR"
+	echo "eucTW EUC-TW"
+	echo "GBK GBK"
+	echo "KSC5601 CP949"
+	echo "sdeckanji EUC-JP"
+	echo "SJIS SHIFT_JIS"
+	echo "TACTIS TIS-620"
+	echo "UTF-8 UTF-8"
+	;;
+    solaris*)
+	echo "646 ASCII"
+	echo "ISO8859-1 ISO-8859-1"
+	echo "ISO8859-2 ISO-8859-2"
+	echo "ISO8859-3 ISO-8859-3"
+	echo "ISO8859-4 ISO-8859-4"
+	echo "ISO8859-5 ISO-8859-5"
+	echo "ISO8859-6 ISO-8859-6"
+	echo "ISO8859-7 ISO-8859-7"
+	echo "ISO8859-8 ISO-8859-8"
+	echo "ISO8859-9 ISO-8859-9"
+	echo "ISO8859-15 ISO-8859-15"
+	echo "koi8-r KOI8-R"
+	echo "ansi-1251 CP1251"
+	echo "BIG5 BIG5"
+	echo "Big5-HKSCS BIG5-HKSCS"
+	echo "gb2312 GB2312"
+	echo "GBK GBK"
+	echo "GB18030 GB18030"
+	echo "cns11643 EUC-TW"
+	echo "5601 EUC-KR"
+	echo "ko_KR.johap92 JOHAB"
+	echo "eucJP EUC-JP"
+	echo "PCK SHIFT_JIS"
+	echo "TIS620.2533 TIS-620"
+	#echo "sun_eu_greek ?" # what is this?
+	echo "UTF-8 UTF-8"
+	;;
+    freebsd* | os2*)
+	# FreeBSD 4.2 doesn't have nl_langinfo(CODESET); therefore
+	# localcharset.c falls back to using the full locale name
+	# from the environment variables.
+	# Likewise for OS/2. OS/2 has XFree86 just like FreeBSD. Just
+	# reuse FreeBSD's locale data for OS/2.
+	echo "C ASCII"
+	echo "US-ASCII ASCII"
+	for l in la_LN lt_LN; do
+	  echo "$l.ASCII ASCII"
+	done
+	for l in da_DK de_AT de_CH de_DE en_AU en_CA en_GB en_US es_ES \
+	         fi_FI fr_BE fr_CA fr_CH fr_FR is_IS it_CH it_IT la_LN \
+	         lt_LN nl_BE nl_NL no_NO pt_PT sv_SE; do
+	  echo "$l.ISO_8859-1 ISO-8859-1"
+	  echo "$l.DIS_8859-15 ISO-8859-15"
+	done
+	for l in cs_CZ hr_HR hu_HU la_LN lt_LN pl_PL sl_SI; do
+	  echo "$l.ISO_8859-2 ISO-8859-2"
+	done
+	for l in la_LN lt_LT; do
+	  echo "$l.ISO_8859-4 ISO-8859-4"
+	done
+	for l in ru_RU ru_SU; do
+	  echo "$l.KOI8-R KOI8-R"
+	  echo "$l.ISO_8859-5 ISO-8859-5"
+	  echo "$l.CP866 CP866"
+	done
+	echo "uk_UA.KOI8-U KOI8-U"
+	echo "zh_TW.BIG5 BIG5"
+	echo "zh_TW.Big5 BIG5"
+	echo "zh_CN.EUC GB2312"
+	echo "ja_JP.EUC EUC-JP"
+	echo "ja_JP.SJIS SHIFT_JIS"
+	echo "ja_JP.Shift_JIS SHIFT_JIS"
+	echo "ko_KR.EUC EUC-KR"
+	;;
+    netbsd*)
+	echo "646 ASCII"
+	echo "ISO8859-1 ISO-8859-1"
+	echo "ISO8859-2 ISO-8859-2"
+	echo "ISO8859-4 ISO-8859-4"
+	echo "ISO8859-5 ISO-8859-5"
+	echo "ISO8859-15 ISO-8859-15"
+	echo "eucCN GB2312"
+	echo "eucJP EUC-JP"
+	echo "eucKR EUC-KR"
+	echo "eucTW EUC-TW"
+	echo "BIG5 BIG5"
+	echo "SJIS SHIFT_JIS"
+	;;
+    beos*)
+	# BeOS has a single locale, and it has UTF-8 encoding.
+	echo "* UTF-8"
+	;;
+    msdosdjgpp*)
+	# DJGPP 2.03 doesn't have nl_langinfo(CODESET); therefore
+	# localcharset.c falls back to using the full locale name
+	# from the environment variables.
+	echo "#"
+	echo "# The encodings given here may not all be correct."
+	echo "# If you find that the encoding given for your language and"
+	echo "# country is not the one your DOS machine actually uses, just"
+	echo "# correct it in this file, and send a mail to"
+	echo "# Juan Manuel Guerrero <st001906@hrz1.hrz.tu-darmstadt.de>"
+	echo "# and Bruno Haible <bruno@clisp.org>."
+	echo "#"
+	echo "C ASCII"
+	# ISO-8859-1 languages
+	echo "ca CP850"
+	echo "ca_ES CP850"
+	echo "da CP865"    # not CP850 ??
+	echo "da_DK CP865" # not CP850 ??
+	echo "de CP850"
+	echo "de_AT CP850"
+	echo "de_CH CP850"
+	echo "de_DE CP850"
+	echo "en CP850"
+	echo "en_AU CP850" # not CP437 ??
+	echo "en_CA CP850"
+	echo "en_GB CP850"
+	echo "en_NZ CP437"
+	echo "en_US CP437"
+	echo "en_ZA CP850" # not CP437 ??
+	echo "es CP850"
+	echo "es_AR CP850"
+	echo "es_BO CP850"
+	echo "es_CL CP850"
+	echo "es_CO CP850"
+	echo "es_CR CP850"
+	echo "es_CU CP850"
+	echo "es_DO CP850"
+	echo "es_EC CP850"
+	echo "es_ES CP850"
+	echo "es_GT CP850"
+	echo "es_HN CP850"
+	echo "es_MX CP850"
+	echo "es_NI CP850"
+	echo "es_PA CP850"
+	echo "es_PY CP850"
+	echo "es_PE CP850"
+	echo "es_SV CP850"
+	echo "es_UY CP850"
+	echo "es_VE CP850"
+	echo "et CP850"
+	echo "et_EE CP850"
+	echo "eu CP850"
+	echo "eu_ES CP850"
+	echo "fi CP850"
+	echo "fi_FI CP850"
+	echo "fr CP850"
+	echo "fr_BE CP850"
+	echo "fr_CA CP850"
+	echo "fr_CH CP850"
+	echo "fr_FR CP850"
+	echo "ga CP850"
+	echo "ga_IE CP850"
+	echo "gd CP850"
+	echo "gd_GB CP850"
+	echo "gl CP850"
+	echo "gl_ES CP850"
+	echo "id CP850"    # not CP437 ??
+	echo "id_ID CP850" # not CP437 ??
+	echo "is CP861"    # not CP850 ??
+	echo "is_IS CP861" # not CP850 ??
+	echo "it CP850"
+	echo "it_CH CP850"
+	echo "it_IT CP850"
+	echo "lt CP775"
+	echo "lt_LT CP775"
+	echo "lv CP775"
+	echo "lv_LV CP775"
+	echo "nb CP865"    # not CP850 ??
+	echo "nb_NO CP865" # not CP850 ??
+	echo "nl CP850"
+	echo "nl_BE CP850"
+	echo "nl_NL CP850"
+	echo "nn CP865"    # not CP850 ??
+	echo "nn_NO CP865" # not CP850 ??
+	echo "no CP865"    # not CP850 ??
+	echo "no_NO CP865" # not CP850 ??
+	echo "pt CP850"
+	echo "pt_BR CP850"
+	echo "pt_PT CP850"
+	echo "sv CP850"
+	echo "sv_SE CP850"
+	# ISO-8859-2 languages
+	echo "cs CP852"
+	echo "cs_CZ CP852"
+	echo "hr CP852"
+	echo "hr_HR CP852"
+	echo "hu CP852"
+	echo "hu_HU CP852"
+	echo "pl CP852"
+	echo "pl_PL CP852"
+	echo "ro CP852"
+	echo "ro_RO CP852"
+	echo "sk CP852"
+	echo "sk_SK CP852"
+	echo "sl CP852"
+	echo "sl_SI CP852"
+	echo "sq CP852"
+	echo "sq_AL CP852"
+	echo "sr CP852"    # CP852 or CP866 or CP855 ??
+	echo "sr_YU CP852" # CP852 or CP866 or CP855 ??
+	# ISO-8859-3 languages
+	echo "mt CP850"
+	echo "mt_MT CP850"
+	# ISO-8859-5 languages
+	echo "be CP866"
+	echo "be_BE CP866"
+	echo "bg CP866"    # not CP855 ??
+	echo "bg_BG CP866" # not CP855 ??
+	echo "mk CP866"    # not CP855 ??
+	echo "mk_MK CP866" # not CP855 ??
+	echo "ru CP866"
+	echo "ru_RU CP866"
+	echo "uk CP1125"
+	echo "uk_UA CP1125"
+	# ISO-8859-6 languages
+	echo "ar CP864"
+	echo "ar_AE CP864"
+	echo "ar_DZ CP864"
+	echo "ar_EG CP864"
+	echo "ar_IQ CP864"
+	echo "ar_IR CP864"
+	echo "ar_JO CP864"
+	echo "ar_KW CP864"
+	echo "ar_MA CP864"
+	echo "ar_OM CP864"
+	echo "ar_QA CP864"
+	echo "ar_SA CP864"
+	echo "ar_SY CP864"
+	# ISO-8859-7 languages
+	echo "el CP869"
+	echo "el_GR CP869"
+	# ISO-8859-8 languages
+	echo "he CP862"
+	echo "he_IL CP862"
+	# ISO-8859-9 languages
+	echo "tr CP857"
+	echo "tr_TR CP857"
+	# Japanese
+	echo "ja CP932"
+	echo "ja_JP CP932"
+	# Chinese
+	echo "zh_CN GBK"
+	echo "zh_TW CP950" # not CP938 ??
+	# Korean
+	echo "kr CP949"    # not CP934 ??
+	echo "kr_KR CP949" # not CP934 ??
+	# Thai
+	echo "th CP874"
+	echo "th_TH CP874"
+	# Other
+	echo "eo CP850"
+	echo "eo_EO CP850"
+	;;
+esac
diff --git a/lib/intl/dcgettext.c b/lib/intl/dcgettext.c
new file mode 100644
index 0000000..c156ca2
--- /dev/null
+++ b/lib/intl/dcgettext.c
@@ -0,0 +1,61 @@
+/* dcgettext.c - Implementation of the dcgettext(3) function. */
+
+/* Copyright (C) 1995-1999, 2000, 2001, 2002, 2006-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include "gettextP.h"
+#ifdef _LIBC
+# include <libintl.h>
+#else
+# include "libgnuintl.h"
+#endif
+
+/* @@ end of prolog @@ */
+
+/* Names for the libintl functions are a problem.  They must not clash
+   with existing names and they should follow ANSI C.  But this source
+   code is also used in GNU C Library where the names have a __
+   prefix.  So we have to make a difference here.  */
+#ifdef _LIBC
+# define DCGETTEXT __dcgettext
+# define DCIGETTEXT __dcigettext
+#else
+# define DCGETTEXT libintl_dcgettext
+# define DCIGETTEXT libintl_dcigettext
+#endif
+
+/* Look up MSGID in the DOMAINNAME message catalog for the current CATEGORY
+   locale.  */
+char *
+DCGETTEXT (domainname, msgid, category)
+     const char *domainname;
+     const char *msgid;
+     int category;
+{
+  return DCIGETTEXT (domainname, msgid, NULL, 0, 0, category);
+}
+
+#ifdef _LIBC
+/* Alias for function name in GNU C Library.  */
+INTDEF(__dcgettext)
+weak_alias (__dcgettext, dcgettext);
+#endif
diff --git a/lib/intl/dcigettext.c b/lib/intl/dcigettext.c
new file mode 100644
index 0000000..c0f347e
--- /dev/null
+++ b/lib/intl/dcigettext.c
@@ -0,0 +1,1248 @@
+/* dcigettext.c - Implementation of the internal dcigettext function. */
+
+/* Copyright (C) 1995-1999, 2000-2003, 2006-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* Tell glibc's <string.h> to provide a prototype for mempcpy().
+   This must come before <config.h> because <config.h> may include
+   <features.h>, and once <features.h> has been included, it's too late.  */
+#ifndef _GNU_SOURCE
+# define _GNU_SOURCE	1
+#endif
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include <sys/types.h>
+
+#ifdef __GNUC__
+# define alloca __builtin_alloca
+# define HAVE_ALLOCA 1
+#else
+# ifdef _MSC_VER
+#  include <malloc.h>
+#  define alloca _alloca
+# else
+#  if defined HAVE_ALLOCA_H || defined _LIBC
+#   include <alloca.h>
+#  else
+#   ifdef _AIX
+ #pragma alloca
+#   else
+#    ifndef alloca
+char *alloca ();
+#    endif
+#   endif
+#  endif
+# endif
+#endif
+
+#include <errno.h>
+#ifndef errno
+extern int errno;
+#endif
+#ifndef __set_errno
+# define __set_errno(val) errno = (val)
+#endif
+
+#include <stddef.h>
+#include <stdlib.h>
+#include <string.h>
+
+#if defined HAVE_UNISTD_H || defined _LIBC
+# include <unistd.h>
+#endif
+
+#include <locale.h>
+
+#ifdef _LIBC
+  /* Guess whether integer division by zero raises signal SIGFPE.
+     Set to 1 only if you know for sure.  In case of doubt, set to 0.  */
+# if defined __alpha__ || defined __arm__ || defined __i386__ \
+     || defined __m68k__ || defined __s390__
+#  define INTDIV0_RAISES_SIGFPE 1
+# else
+#  define INTDIV0_RAISES_SIGFPE 0
+# endif
+#endif
+#if !INTDIV0_RAISES_SIGFPE
+# include <signal.h>
+#endif
+
+#if defined HAVE_SYS_PARAM_H || defined _LIBC
+# include <sys/param.h>
+#endif
+
+#include "gettextP.h"
+#include "plural-exp.h"
+#ifdef _LIBC
+# include <libintl.h>
+#else
+# include "libgnuintl.h"
+#endif
+#include "hash-string.h"
+
+/* Thread safetyness.  */
+#ifdef _LIBC
+# include <bits/libc-lock.h>
+#else
+/* Provide dummy implementation if this is outside glibc.  */
+# define __libc_lock_define_initialized(CLASS, NAME)
+# define __libc_lock_lock(NAME)
+# define __libc_lock_unlock(NAME)
+# define __libc_rwlock_define_initialized(CLASS, NAME)
+# define __libc_rwlock_rdlock(NAME)
+# define __libc_rwlock_unlock(NAME)
+#endif
+
+/* Alignment of types.  */
+#if defined __GNUC__ && __GNUC__ >= 2
+# define alignof(TYPE) __alignof__ (TYPE)
+#else
+# define alignof(TYPE) \
+    ((int) &((struct { char dummy1; TYPE dummy2; } *) 0)->dummy2)
+#endif
+
+/* The internal variables in the standalone libintl.a must have different
+   names than the internal variables in GNU libc, otherwise programs
+   using libintl.a cannot be linked statically.  */
+#if !defined _LIBC
+# define _nl_default_default_domain libintl_nl_default_default_domain
+# define _nl_current_default_domain libintl_nl_current_default_domain
+# define _nl_default_dirname libintl_nl_default_dirname
+# define _nl_domain_bindings libintl_nl_domain_bindings
+#endif
+
+/* Some compilers, like SunOS4 cc, don't have offsetof in <stddef.h>.  */
+#ifndef offsetof
+# define offsetof(type,ident) ((size_t)&(((type*)0)->ident))
+#endif
+
+/* @@ end of prolog @@ */
+
+#if defined (SHELL) && !defined (HAVE_GETCWD)
+#  define HAVE_GETCWD
+#endif
+
+#ifdef _LIBC
+/* Rename the non ANSI C functions.  This is required by the standard
+   because some ANSI C functions will require linking with this object
+   file and the name space must not be polluted.  */
+# define getcwd __getcwd
+# ifndef stpcpy
+#  define stpcpy __stpcpy
+# endif
+# define tfind __tfind
+#else
+# if !defined HAVE_GETCWD
+char *getwd ();
+#  define getcwd(buf, max) getwd (buf)
+# else
+char *getcwd ();
+# endif
+# ifndef HAVE_STPCPY
+static char *stpcpy PARAMS ((char *dest, const char *src));
+# endif
+# ifndef HAVE_MEMPCPY
+static void *mempcpy PARAMS ((void *dest, const void *src, size_t n));
+# endif
+#endif
+
+/* Amount to increase buffer size by in each try.  */
+#define PATH_INCR 32
+
+/* The following is from pathmax.h.  */
+/* Non-POSIX BSD systems might have gcc's limits.h, which doesn't define
+   PATH_MAX but might cause redefinition warnings when sys/param.h is
+   later included (as on MORE/BSD 4.3).  */
+#if defined _POSIX_VERSION || (defined HAVE_LIMITS_H && !defined __GNUC__)
+# include <limits.h>
+#endif
+
+#ifndef _POSIX_PATH_MAX
+# define _POSIX_PATH_MAX 255
+#endif
+
+#if !defined PATH_MAX && defined _PC_PATH_MAX
+# define PATH_MAX (pathconf ("/", _PC_PATH_MAX) < 1 ? 1024 : pathconf ("/", _PC_PATH_MAX))
+#endif
+
+/* Don't include sys/param.h if it already has been.  */
+#if defined HAVE_SYS_PARAM_H && !defined PATH_MAX && !defined MAXPATHLEN
+# include <sys/param.h>
+#endif
+
+#if !defined PATH_MAX && defined MAXPATHLEN
+# define PATH_MAX MAXPATHLEN
+#endif
+
+#ifndef PATH_MAX
+# define PATH_MAX _POSIX_PATH_MAX
+#endif
+
+/* Pathname support.
+   ISSLASH(C)           tests whether C is a directory separator character.
+   IS_ABSOLUTE_PATH(P)  tests whether P is an absolute path.  If it is not,
+                        it may be concatenated to a directory pathname.
+   IS_PATH_WITH_DIR(P)  tests whether P contains a directory specification.
+ */
+#if defined _WIN32 || defined __WIN32__ || defined __EMX__ || defined __DJGPP__
+  /* Win32, OS/2, DOS */
+# define ISSLASH(C) ((C) == '/' || (C) == '\\')
+# define HAS_DEVICE(P) \
+    ((((P)[0] >= 'A' && (P)[0] <= 'Z') || ((P)[0] >= 'a' && (P)[0] <= 'z')) \
+     && (P)[1] == ':')
+# define IS_ABSOLUTE_PATH(P) (ISSLASH ((P)[0]) || HAS_DEVICE (P))
+# define IS_PATH_WITH_DIR(P) \
+    (strchr (P, '/') != NULL || strchr (P, '\\') != NULL || HAS_DEVICE (P))
+#else
+  /* Unix */
+# define ISSLASH(C) ((C) == '/')
+# define IS_ABSOLUTE_PATH(P) ISSLASH ((P)[0])
+# define IS_PATH_WITH_DIR(P) (strchr (P, '/') != NULL)
+#endif
+
+/* This is the type used for the search tree where known translations
+   are stored.  */
+struct known_translation_t
+{
+  /* Domain in which to search.  */
+  char *domainname;
+
+  /* The category.  */
+  int category;
+
+  /* State of the catalog counter at the point the string was found.  */
+  int counter;
+
+  /* Catalog where the string was found.  */
+  struct loaded_l10nfile *domain;
+
+  /* And finally the translation.  */
+  const char *translation;
+  size_t translation_length;
+
+  /* Pointer to the string in question.  */
+  char msgid[ZERO];
+};
+
+/* Root of the search tree with known translations.  We can use this
+   only if the system provides the `tsearch' function family.  */
+#if defined HAVE_TSEARCH || defined _LIBC
+# include <search.h>
+
+static void *root;
+
+# ifdef _LIBC
+#  define tsearch __tsearch
+# endif
+
+/* Function to compare two entries in the table of known translations.  */
+static int transcmp PARAMS ((const void *p1, const void *p2));
+static int
+transcmp (p1, p2)
+     const void *p1;
+     const void *p2;
+{
+  const struct known_translation_t *s1;
+  const struct known_translation_t *s2;
+  int result;
+
+  s1 = (const struct known_translation_t *) p1;
+  s2 = (const struct known_translation_t *) p2;
+
+  result = strcmp (s1->msgid, s2->msgid);
+  if (result == 0)
+    {
+      result = strcmp (s1->domainname, s2->domainname);
+      if (result == 0)
+	/* We compare the category last (though this is the cheapest
+	   operation) since it is hopefully always the same (namely
+	   LC_MESSAGES).  */
+	result = s1->category - s2->category;
+    }
+
+  return result;
+}
+#endif
+
+#ifndef INTVARDEF
+# define INTVARDEF(name)
+#endif
+#ifndef INTUSE
+# define INTUSE(name) name
+#endif
+
+/* Name of the default domain used for gettext(3) prior any call to
+   textdomain(3).  The default value for this is "messages".  */
+const char _nl_default_default_domain[] attribute_hidden = "messages";
+
+/* Value used as the default domain for gettext(3).  */
+const char *_nl_current_default_domain attribute_hidden
+     = _nl_default_default_domain;
+
+/* Contains the default location of the message catalogs.  */
+#if defined __EMX__
+extern const char _nl_default_dirname[];
+#else
+const char _nl_default_dirname[] = LOCALEDIR;
+INTVARDEF (_nl_default_dirname)
+#endif
+
+/* List with bindings of specific domains created by bindtextdomain()
+   calls.  */
+struct binding *_nl_domain_bindings;
+
+/* Prototypes for local functions.  */
+static char *plural_lookup PARAMS ((struct loaded_l10nfile *domain,
+				    unsigned long int n,
+				    const char *translation,
+				    size_t translation_len))
+     internal_function;
+static const char *guess_category_value PARAMS ((int category,
+						 const char *categoryname))
+     internal_function;
+#ifdef _LIBC
+# include "../locale/localeinfo.h"
+# define category_to_name(category)	_nl_category_names[category]
+#else
+static const char *category_to_name PARAMS ((int category)) internal_function;
+#endif
+
+
+/* For those loosing systems which don't have `alloca' we have to add
+   some additional code emulating it.  */
+#ifdef HAVE_ALLOCA
+/* Nothing has to be done.  */
+# define freea(p) /* nothing */
+# define ADD_BLOCK(list, address) /* nothing */
+# define FREE_BLOCKS(list) /* nothing */
+#else
+struct block_list
+{
+  void *address;
+  struct block_list *next;
+};
+# define ADD_BLOCK(list, addr)						      \
+  do {									      \
+    struct block_list *newp = (struct block_list *) malloc (sizeof (*newp));  \
+    /* If we cannot get a free block we cannot add the new element to	      \
+       the list.  */							      \
+    if (newp != NULL) {							      \
+      newp->address = (addr);						      \
+      newp->next = (list);						      \
+      (list) = newp;							      \
+    }									      \
+  } while (0)
+# define FREE_BLOCKS(list)						      \
+  do {									      \
+    while (list != NULL) {						      \
+      struct block_list *old = list;					      \
+      list = list->next;						      \
+      free (old->address);						      \
+      free (old);							      \
+    }									      \
+  } while (0)
+# undef alloca
+# define alloca(size) (malloc (size))
+# define freea(p) free (p)
+#endif	/* have alloca */
+
+
+#ifdef _LIBC
+/* List of blocks allocated for translations.  */
+typedef struct transmem_list
+{
+  struct transmem_list *next;
+  char data[ZERO];
+} transmem_block_t;
+static struct transmem_list *transmem_list;
+#else
+typedef unsigned char transmem_block_t;
+#endif
+
+
+/* Names for the libintl functions are a problem.  They must not clash
+   with existing names and they should follow ANSI C.  But this source
+   code is also used in GNU C Library where the names have a __
+   prefix.  So we have to make a difference here.  */
+#ifdef _LIBC
+# define DCIGETTEXT __dcigettext
+#else
+# define DCIGETTEXT libintl_dcigettext
+#endif
+
+/* Lock variable to protect the global data in the gettext implementation.  */
+#ifdef _LIBC
+__libc_rwlock_define_initialized (, _nl_state_lock attribute_hidden)
+#endif
+
+/* Checking whether the binaries runs SUID must be done and glibc provides
+   easier methods therefore we make a difference here.  */
+#ifdef _LIBC
+# define ENABLE_SECURE __libc_enable_secure
+# define DETERMINE_SECURE
+#else
+# ifndef HAVE_GETUID
+#  define getuid() 0
+# endif
+# ifndef HAVE_GETGID
+#  define getgid() 0
+# endif
+# ifndef HAVE_GETEUID
+#  define geteuid() getuid()
+# endif
+# ifndef HAVE_GETEGID
+#  define getegid() getgid()
+# endif
+static int enable_secure;
+# define ENABLE_SECURE (enable_secure == 1)
+# define DETERMINE_SECURE \
+  if (enable_secure == 0)						      \
+    {									      \
+      if (getuid () != geteuid () || getgid () != getegid ())		      \
+	enable_secure = 1;						      \
+      else								      \
+	enable_secure = -1;						      \
+    }
+#endif
+
+#ifndef HAVE_RAISE
+#  define raise(x)	kill (getpid (), (x))
+#endif
+
+/* Get the function to evaluate the plural expression.  */
+#include "eval-plural.h"
+
+/* Look up MSGID in the DOMAINNAME message catalog for the current
+   CATEGORY locale and, if PLURAL is nonzero, search over string
+   depending on the plural form determined by N.  */
+char *
+DCIGETTEXT (domainname, msgid1, msgid2, plural, n, category)
+     const char *domainname;
+     const char *msgid1;
+     const char *msgid2;
+     int plural;
+     unsigned long int n;
+     int category;
+{
+#ifndef HAVE_ALLOCA
+  struct block_list *block_list = NULL;
+#endif
+  struct loaded_l10nfile *domain;
+  struct binding *binding;
+  const char *categoryname;
+  const char *categoryvalue;
+  char *dirname, *xdomainname;
+  char *single_locale;
+  char *retval;
+  size_t retlen;
+  int saved_errno;
+#if defined HAVE_TSEARCH || defined _LIBC
+  struct known_translation_t *search;
+  struct known_translation_t **foundp = NULL;
+  size_t msgid_len;
+#endif
+  size_t domainname_len;
+
+  /* If no real MSGID is given return NULL.  */
+  if (msgid1 == NULL)
+    return NULL;
+
+#ifdef _LIBC
+  if (category < 0 || category >= __LC_LAST || category == LC_ALL)
+    /* Bogus.  */
+    return (plural == 0
+	    ? (char *) msgid1
+	    /* Use the Germanic plural rule.  */
+	    : n == 1 ? (char *) msgid1 : (char *) msgid2);
+#endif
+
+  __libc_rwlock_rdlock (_nl_state_lock);
+
+  /* If DOMAINNAME is NULL, we are interested in the default domain.  If
+     CATEGORY is not LC_MESSAGES this might not make much sense but the
+     definition left this undefined.  */
+  if (domainname == NULL)
+    domainname = _nl_current_default_domain;
+
+  /* OS/2 specific: backward compatibility with older libintl versions  */
+#ifdef LC_MESSAGES_COMPAT
+  if (category == LC_MESSAGES_COMPAT)
+    category = LC_MESSAGES;
+#endif
+
+#if defined HAVE_TSEARCH || defined _LIBC
+  msgid_len = strlen (msgid1) + 1;
+
+  /* Try to find the translation among those which we found at
+     some time.  */
+  search = (struct known_translation_t *)
+	   alloca (offsetof (struct known_translation_t, msgid) + msgid_len);
+  memcpy (search->msgid, msgid1, msgid_len);
+  search->domainname = (char *) domainname;
+  search->category = category;
+
+  foundp = (struct known_translation_t **) tfind (search, &root, transcmp);
+  freea (search);
+  if (foundp != NULL && (*foundp)->counter == _nl_msg_cat_cntr)
+    {
+      /* Now deal with plural.  */
+      if (plural)
+	retval = plural_lookup ((*foundp)->domain, n, (*foundp)->translation,
+				(*foundp)->translation_length);
+      else
+	retval = (char *) (*foundp)->translation;
+
+      __libc_rwlock_unlock (_nl_state_lock);
+      return retval;
+    }
+#endif
+
+  /* Preserve the `errno' value.  */
+  saved_errno = errno;
+
+  /* See whether this is a SUID binary or not.  */
+  DETERMINE_SECURE;
+
+  /* First find matching binding.  */
+  for (binding = _nl_domain_bindings; binding != NULL; binding = binding->next)
+    {
+      int compare = strcmp (domainname, binding->domainname);
+      if (compare == 0)
+	/* We found it!  */
+	break;
+      if (compare < 0)
+	{
+	  /* It is not in the list.  */
+	  binding = NULL;
+	  break;
+	}
+    }
+
+  if (binding == NULL)
+    dirname = (char *) INTUSE(_nl_default_dirname);
+  else if (IS_ABSOLUTE_PATH (binding->dirname))
+    dirname = binding->dirname;
+  else
+    {
+      /* We have a relative path.  Make it absolute now.  */
+      size_t dirname_len = strlen (binding->dirname) + 1;
+      size_t path_max;
+      char *ret;
+
+      path_max = (unsigned int) PATH_MAX;
+      path_max += 2;		/* The getcwd docs say to do this.  */
+
+      for (;;)
+	{
+	  dirname = (char *) alloca (path_max + dirname_len);
+	  ADD_BLOCK (block_list, dirname);
+
+	  __set_errno (0);
+	  ret = getcwd (dirname, path_max);
+	  if (ret != NULL || errno != ERANGE)
+	    break;
+
+	  path_max += path_max / 2;
+	  path_max += PATH_INCR;
+	}
+
+      if (ret == NULL)
+	/* We cannot get the current working directory.  Don't signal an
+	   error but simply return the default string.  */
+	goto return_untranslated;
+
+      stpcpy (stpcpy (strchr (dirname, '\0'), "/"), binding->dirname);
+    }
+
+  /* Now determine the symbolic name of CATEGORY and its value.  */
+  categoryname = category_to_name (category);
+  categoryvalue = guess_category_value (category, categoryname);
+
+  domainname_len = strlen (domainname);
+  xdomainname = (char *) alloca (strlen (categoryname)
+				 + domainname_len + 5);
+  ADD_BLOCK (block_list, xdomainname);
+
+  stpcpy (mempcpy (stpcpy (stpcpy (xdomainname, categoryname), "/"),
+		  domainname, domainname_len),
+	  ".mo");
+
+  /* Creating working area.  */
+  single_locale = (char *) alloca (strlen (categoryvalue) + 1);
+  ADD_BLOCK (block_list, single_locale);
+
+
+  /* Search for the given string.  This is a loop because we perhaps
+     got an ordered list of languages to consider for the translation.  */
+  while (1)
+    {
+      /* Make CATEGORYVALUE point to the next element of the list.  */
+      while (categoryvalue[0] != '\0' && categoryvalue[0] == ':')
+	++categoryvalue;
+      if (categoryvalue[0] == '\0')
+	{
+	  /* The whole contents of CATEGORYVALUE has been searched but
+	     no valid entry has been found.  We solve this situation
+	     by implicitly appending a "C" entry, i.e. no translation
+	     will take place.  */
+	  single_locale[0] = 'C';
+	  single_locale[1] = '\0';
+	}
+      else
+	{
+	  char *cp = single_locale;
+	  while (categoryvalue[0] != '\0' && categoryvalue[0] != ':')
+	    *cp++ = *categoryvalue++;
+	  *cp = '\0';
+
+	  /* When this is a SUID binary we must not allow accessing files
+	     outside the dedicated directories.  */
+	  if (ENABLE_SECURE && IS_PATH_WITH_DIR (single_locale))
+	    /* Ingore this entry.  */
+	    continue;
+	}
+
+      /* If the current locale value is C (or POSIX) we don't load a
+	 domain.  Return the MSGID.  */
+      if (strcmp (single_locale, "C") == 0
+	  || strcmp (single_locale, "POSIX") == 0)
+	break;
+
+      /* Find structure describing the message catalog matching the
+	 DOMAINNAME and CATEGORY.  */
+      domain = _nl_find_domain (dirname, single_locale, xdomainname, binding);
+
+      if (domain != NULL)
+	{
+	  retval = _nl_find_msg (domain, binding, msgid1, &retlen);
+
+	  if (retval == NULL)
+	    {
+	      int cnt;
+
+	      for (cnt = 0; domain->successor[cnt] != NULL; ++cnt)
+		{
+		  retval = _nl_find_msg (domain->successor[cnt], binding,
+					 msgid1, &retlen);
+
+		  if (retval != NULL)
+		    {
+		      domain = domain->successor[cnt];
+		      break;
+		    }
+		}
+	    }
+
+	  if (retval != NULL)
+	    {
+	      /* Found the translation of MSGID1 in domain DOMAIN:
+		 starting at RETVAL, RETLEN bytes.  */
+	      FREE_BLOCKS (block_list);
+#if defined HAVE_TSEARCH || defined _LIBC
+	      if (foundp == NULL)
+		{
+		  /* Create a new entry and add it to the search tree.  */
+		  struct known_translation_t *newp;
+
+		  newp = (struct known_translation_t *)
+		    malloc (offsetof (struct known_translation_t, msgid)
+			    + msgid_len + domainname_len + 1);
+		  if (newp != NULL)
+		    {
+		      newp->domainname =
+			mempcpy (newp->msgid, msgid1, msgid_len);
+		      memcpy (newp->domainname, domainname, domainname_len + 1);
+		      newp->category = category;
+		      newp->counter = _nl_msg_cat_cntr;
+		      newp->domain = domain;
+		      newp->translation = retval;
+		      newp->translation_length = retlen;
+
+		      /* Insert the entry in the search tree.  */
+		      foundp = (struct known_translation_t **)
+			tsearch (newp, &root, transcmp);
+		      if (foundp == NULL
+			  || __builtin_expect (*foundp != newp, 0))
+			/* The insert failed.  */
+			free (newp);
+		    }
+		}
+	      else
+		{
+		  /* We can update the existing entry.  */
+		  (*foundp)->counter = _nl_msg_cat_cntr;
+		  (*foundp)->domain = domain;
+		  (*foundp)->translation = retval;
+		  (*foundp)->translation_length = retlen;
+		}
+#endif
+	      __set_errno (saved_errno);
+
+	      /* Now deal with plural.  */
+	      if (plural)
+		retval = plural_lookup (domain, n, retval, retlen);
+
+	      __libc_rwlock_unlock (_nl_state_lock);
+	      return retval;
+	    }
+	}
+    }
+
+ return_untranslated:
+  /* Return the untranslated MSGID.  */
+  FREE_BLOCKS (block_list);
+  __libc_rwlock_unlock (_nl_state_lock);
+#ifndef _LIBC
+  if (!ENABLE_SECURE)
+    {
+      extern void _nl_log_untranslated PARAMS ((const char *logfilename,
+						const char *domainname,
+						const char *msgid1,
+						const char *msgid2,
+						int plural));
+      const char *logfilename = getenv ("GETTEXT_LOG_UNTRANSLATED");
+
+      if (logfilename != NULL && logfilename[0] != '\0')
+	_nl_log_untranslated (logfilename, domainname, msgid1, msgid2, plural);
+    }
+#endif
+  __set_errno (saved_errno);
+  return (plural == 0
+	  ? (char *) msgid1
+	  /* Use the Germanic plural rule.  */
+	  : n == 1 ? (char *) msgid1 : (char *) msgid2);
+}
+
+
+char *
+internal_function
+_nl_find_msg (domain_file, domainbinding, msgid, lengthp)
+     struct loaded_l10nfile *domain_file;
+     struct binding *domainbinding;
+     const char *msgid;
+     size_t *lengthp;
+{
+  struct loaded_domain *domain;
+  nls_uint32 nstrings;
+  size_t act;
+  char *result;
+  size_t resultlen;
+
+  if (domain_file->decided == 0)
+    _nl_load_domain (domain_file, domainbinding);
+
+  if (domain_file->data == NULL)
+    return NULL;
+
+  domain = (struct loaded_domain *) domain_file->data;
+
+  nstrings = domain->nstrings;
+
+  /* Locate the MSGID and its translation.  */
+  if (domain->hash_tab != NULL)
+    {
+      /* Use the hashing table.  */
+      nls_uint32 len = strlen (msgid);
+      nls_uint32 hash_val = hash_string (msgid);
+      nls_uint32 idx = hash_val % domain->hash_size;
+      nls_uint32 incr = 1 + (hash_val % (domain->hash_size - 2));
+
+      while (1)
+	{
+	  nls_uint32 nstr =
+	    W (domain->must_swap_hash_tab, domain->hash_tab[idx]);
+
+	  if (nstr == 0)
+	    /* Hash table entry is empty.  */
+	    return NULL;
+
+	  nstr--;
+
+	  /* Compare msgid with the original string at index nstr.
+	     We compare the lengths with >=, not ==, because plural entries
+	     are represented by strings with an embedded NUL.  */
+	  if (nstr < nstrings
+	      ? W (domain->must_swap, domain->orig_tab[nstr].length) >= len
+		&& (strcmp (msgid,
+			    domain->data + W (domain->must_swap,
+					      domain->orig_tab[nstr].offset))
+		    == 0)
+	      : domain->orig_sysdep_tab[nstr - nstrings].length > len
+		&& (strcmp (msgid,
+			    domain->orig_sysdep_tab[nstr - nstrings].pointer)
+		    == 0))
+	    {
+	      act = nstr;
+	      goto found;
+	    }
+
+	  if (idx >= domain->hash_size - incr)
+	    idx -= domain->hash_size - incr;
+	  else
+	    idx += incr;
+	}
+      /* NOTREACHED */
+    }
+  else
+    {
+      /* Try the default method:  binary search in the sorted array of
+	 messages.  */
+      size_t top, bottom;
+
+      bottom = 0;
+      top = nstrings;
+      while (bottom < top)
+	{
+	  int cmp_val;
+
+	  act = (bottom + top) / 2;
+	  cmp_val = strcmp (msgid, (domain->data
+				    + W (domain->must_swap,
+					 domain->orig_tab[act].offset)));
+	  if (cmp_val < 0)
+	    top = act;
+	  else if (cmp_val > 0)
+	    bottom = act + 1;
+	  else
+	    goto found;
+	}
+      /* No translation was found.  */
+      return NULL;
+    }
+
+ found:
+  /* The translation was found at index ACT.  If we have to convert the
+     string to use a different character set, this is the time.  */
+  if (act < nstrings)
+    {
+      result = (char *)
+	(domain->data + W (domain->must_swap, domain->trans_tab[act].offset));
+      resultlen = W (domain->must_swap, domain->trans_tab[act].length) + 1;
+    }
+  else
+    {
+      result = (char *) domain->trans_sysdep_tab[act - nstrings].pointer;
+      resultlen = domain->trans_sysdep_tab[act - nstrings].length;
+    }
+
+#if defined _LIBC || HAVE_ICONV
+  if (domain->codeset_cntr
+      != (domainbinding != NULL ? domainbinding->codeset_cntr : 0))
+    {
+      /* The domain's codeset has changed through bind_textdomain_codeset()
+	 since the message catalog was initialized or last accessed.  We
+	 have to reinitialize the converter.  */
+      _nl_free_domain_conv (domain);
+      _nl_init_domain_conv (domain_file, domain, domainbinding);
+    }
+
+  if (
+# ifdef _LIBC
+      domain->conv != (__gconv_t) -1
+# else
+#  if HAVE_ICONV
+      domain->conv != (iconv_t) -1
+#  endif
+# endif
+      )
+    {
+      /* We are supposed to do a conversion.  First allocate an
+	 appropriate table with the same structure as the table
+	 of translations in the file, where we can put the pointers
+	 to the converted strings in.
+	 There is a slight complication with plural entries.  They
+	 are represented by consecutive NUL terminated strings.  We
+	 handle this case by converting RESULTLEN bytes, including
+	 NULs.  */
+
+      if (domain->conv_tab == NULL
+	  && ((domain->conv_tab =
+		 (char **) calloc (nstrings + domain->n_sysdep_strings,
+				   sizeof (char *)))
+	      == NULL))
+	/* Mark that we didn't succeed allocating a table.  */
+	domain->conv_tab = (char **) -1;
+
+      if (__builtin_expect (domain->conv_tab == (char **) -1, 0))
+	/* Nothing we can do, no more memory.  */
+	goto converted;
+
+      if (domain->conv_tab[act] == NULL)
+	{
+	  /* We haven't used this string so far, so it is not
+	     translated yet.  Do this now.  */
+	  /* We use a bit more efficient memory handling.
+	     We allocate always larger blocks which get used over
+	     time.  This is faster than many small allocations.   */
+	  __libc_lock_define_initialized (static, lock)
+# define INITIAL_BLOCK_SIZE	4080
+	  static unsigned char *freemem;
+	  static size_t freemem_size;
+
+	  const unsigned char *inbuf;
+	  unsigned char *outbuf;
+	  int malloc_count;
+# ifndef _LIBC
+	  transmem_block_t *transmem_list = NULL;
+# endif
+
+	  __libc_lock_lock (lock);
+
+	  inbuf = (const unsigned char *) result;
+	  outbuf = freemem + sizeof (size_t);
+
+	  malloc_count = 0;
+	  while (1)
+	    {
+	      transmem_block_t *newmem;
+# ifdef _LIBC
+	      size_t non_reversible;
+	      int res;
+
+	      if (freemem_size < sizeof (size_t))
+		goto resize_freemem;
+
+	      res = __gconv (domain->conv,
+			     &inbuf, inbuf + resultlen,
+			     &outbuf,
+			     outbuf + freemem_size - sizeof (size_t),
+			     &non_reversible);
+
+	      if (res == __GCONV_OK || res == __GCONV_EMPTY_INPUT)
+		break;
+
+	      if (res != __GCONV_FULL_OUTPUT)
+		{
+		  __libc_lock_unlock (lock);
+		  goto converted;
+		}
+
+	      inbuf = result;
+# else
+#  if HAVE_ICONV
+	      const char *inptr = (const char *) inbuf;
+	      size_t inleft = resultlen;
+	      char *outptr = (char *) outbuf;
+	      size_t outleft;
+
+	      if (freemem_size < sizeof (size_t))
+		goto resize_freemem;
+
+	      outleft = freemem_size - sizeof (size_t);
+	      if (iconv (domain->conv,
+			 (ICONV_CONST char **) &inptr, &inleft,
+			 &outptr, &outleft)
+		  != (size_t) (-1))
+		{
+		  outbuf = (unsigned char *) outptr;
+		  break;
+		}
+	      if (errno != E2BIG)
+		{
+		  __libc_lock_unlock (lock);
+		  goto converted;
+		}
+#  endif
+# endif
+
+	    resize_freemem:
+	      /* We must allocate a new buffer or resize the old one.  */
+	      if (malloc_count > 0)
+		{
+		  ++malloc_count;
+		  freemem_size = malloc_count * INITIAL_BLOCK_SIZE;
+		  newmem = (transmem_block_t *) realloc (transmem_list,
+							 freemem_size);
+# ifdef _LIBC
+		  if (newmem != NULL)
+		    transmem_list = transmem_list->next;
+		  else
+		    {
+		      struct transmem_list *old = transmem_list;
+
+		      transmem_list = transmem_list->next;
+		      free (old);
+		    }
+# endif
+		}
+	      else
+		{
+		  malloc_count = 1;
+		  freemem_size = INITIAL_BLOCK_SIZE;
+		  newmem = (transmem_block_t *) malloc (freemem_size);
+		}
+	      if (__builtin_expect (newmem == NULL, 0))
+		{
+		  freemem = NULL;
+		  freemem_size = 0;
+		  __libc_lock_unlock (lock);
+		  goto converted;
+		}
+
+# ifdef _LIBC
+	      /* Add the block to the list of blocks we have to free
+                 at some point.  */
+	      newmem->next = transmem_list;
+	      transmem_list = newmem;
+
+	      freemem = newmem->data;
+	      freemem_size -= offsetof (struct transmem_list, data);
+# else
+	      transmem_list = newmem;
+	      freemem = newmem;
+# endif
+
+	      outbuf = freemem + sizeof (size_t);
+	    }
+
+	  /* We have now in our buffer a converted string.  Put this
+	     into the table of conversions.  */
+	  *(size_t *) freemem = outbuf - freemem - sizeof (size_t);
+	  domain->conv_tab[act] = (char *) freemem;
+	  /* Shrink freemem, but keep it aligned.  */
+	  freemem_size -= outbuf - freemem;
+	  freemem = outbuf;
+	  freemem += freemem_size & (alignof (size_t) - 1);
+	  freemem_size = freemem_size & ~ (alignof (size_t) - 1);
+
+	  __libc_lock_unlock (lock);
+	}
+
+      /* Now domain->conv_tab[act] contains the translation of all
+	 the plural variants.  */
+      result = domain->conv_tab[act] + sizeof (size_t);
+      resultlen = *(size_t *) domain->conv_tab[act];
+    }
+
+ converted:
+  /* The result string is converted.  */
+
+#endif /* _LIBC || HAVE_ICONV */
+
+  *lengthp = resultlen;
+  return result;
+}
+
+
+/* Look up a plural variant.  */
+static char *
+internal_function
+plural_lookup (domain, n, translation, translation_len)
+     struct loaded_l10nfile *domain;
+     unsigned long int n;
+     const char *translation;
+     size_t translation_len;
+{
+  struct loaded_domain *domaindata = (struct loaded_domain *) domain->data;
+  unsigned long int index;
+  const char *p;
+
+  index = plural_eval (domaindata->plural, n);
+  if (index >= domaindata->nplurals)
+    /* This should never happen.  It means the plural expression and the
+       given maximum value do not match.  */
+    index = 0;
+
+  /* Skip INDEX strings at TRANSLATION.  */
+  p = translation;
+  while (index-- > 0)
+    {
+#ifdef _LIBC
+      p = __rawmemchr (p, '\0');
+#else
+      p = strchr (p, '\0');
+#endif
+      /* And skip over the NUL byte.  */
+      p++;
+
+      if (p >= translation + translation_len)
+	/* This should never happen.  It means the plural expression
+	   evaluated to a value larger than the number of variants
+	   available for MSGID1.  */
+	return (char *) translation;
+    }
+  return (char *) p;
+}
+
+#ifndef _LIBC
+/* Return string representation of locale CATEGORY.  */
+static const char *
+internal_function
+category_to_name (category)
+     int category;
+{
+  const char *retval;
+
+  switch (category)
+  {
+#ifdef LC_COLLATE
+  case LC_COLLATE:
+    retval = "LC_COLLATE";
+    break;
+#endif
+#ifdef LC_CTYPE
+  case LC_CTYPE:
+    retval = "LC_CTYPE";
+    break;
+#endif
+#ifdef LC_MONETARY
+  case LC_MONETARY:
+    retval = "LC_MONETARY";
+    break;
+#endif
+#ifdef LC_NUMERIC
+  case LC_NUMERIC:
+    retval = "LC_NUMERIC";
+    break;
+#endif
+#ifdef LC_TIME
+  case LC_TIME:
+    retval = "LC_TIME";
+    break;
+#endif
+#ifdef LC_MESSAGES
+  case LC_MESSAGES:
+    retval = "LC_MESSAGES";
+    break;
+#endif
+#ifdef LC_RESPONSE
+  case LC_RESPONSE:
+    retval = "LC_RESPONSE";
+    break;
+#endif
+#ifdef LC_ALL
+  case LC_ALL:
+    /* This might not make sense but is perhaps better than any other
+       value.  */
+    retval = "LC_ALL";
+    break;
+#endif
+  default:
+    /* If you have a better idea for a default value let me know.  */
+    retval = "LC_XXX";
+  }
+
+  return retval;
+}
+#endif
+
+/* Guess value of current locale from value of the environment variables.  */
+static const char *
+internal_function
+guess_category_value (category, categoryname)
+     int category;
+     const char *categoryname;
+{
+  const char *language;
+  const char *retval;
+
+  /* The highest priority value is the `LANGUAGE' environment
+     variable.  But we don't use the value if the currently selected
+     locale is the C locale.  This is a GNU extension.  */
+  language = getenv ("LANGUAGE");
+  if (language != NULL && language[0] == '\0')
+    language = NULL;
+
+  /* We have to proceed with the POSIX methods of looking to `LC_ALL',
+     `LC_xxx', and `LANG'.  On some systems this can be done by the
+     `setlocale' function itself.  */
+#ifdef _LIBC
+  retval = __current_locale_name (category);
+#else
+  retval = _nl_locale_name (category, categoryname);
+#endif
+
+  /* Ignore LANGUAGE if the locale is set to "C" because
+     1. "C" locale usually uses the ASCII encoding, and most international
+	messages use non-ASCII characters. These characters get displayed
+	as question marks (if using glibc's iconv()) or as invalid 8-bit
+	characters (because other iconv()s refuse to convert most non-ASCII
+	characters to ASCII). In any case, the output is ugly.
+     2. The precise output of some programs in the "C" locale is specified
+	by POSIX and should not depend on environment variables like
+	"LANGUAGE".  We allow such programs to use gettext().  */
+  return language != NULL && strcmp (retval, "C") != 0 ? language : retval;
+}
+
+/* @@ begin of epilog @@ */
+
+/* We don't want libintl.a to depend on any other library.  So we
+   avoid the non-standard function stpcpy.  In GNU C Library this
+   function is available, though.  Also allow the symbol HAVE_STPCPY
+   to be defined.  */
+#if !_LIBC && !HAVE_STPCPY
+static char *
+stpcpy (dest, src)
+     char *dest;
+     const char *src;
+{
+  while ((*dest++ = *src++) != '\0')
+    /* Do nothing. */ ;
+  return dest - 1;
+}
+#endif
+
+#if !_LIBC && !HAVE_MEMPCPY
+static void *
+mempcpy (dest, src, n)
+     void *dest;
+     const void *src;
+     size_t n;
+{
+  return (void *) ((char *) memcpy (dest, src, n) + n);
+}
+#endif
+
+
+#ifdef _LIBC
+/* If we want to free all resources we have to do some work at
+   program's end.  */
+libc_freeres_fn (free_mem)
+{
+  void *old;
+
+  while (_nl_domain_bindings != NULL)
+    {
+      struct binding *oldp = _nl_domain_bindings;
+      _nl_domain_bindings = _nl_domain_bindings->next;
+      if (oldp->dirname != INTUSE(_nl_default_dirname))
+	/* Yes, this is a pointer comparison.  */
+	free (oldp->dirname);
+      free (oldp->codeset);
+      free (oldp);
+    }
+
+  if (_nl_current_default_domain != _nl_default_default_domain)
+    /* Yes, again a pointer comparison.  */
+    free ((char *) _nl_current_default_domain);
+
+  /* Remove the search tree with the known translations.  */
+  __tdestroy (root, free);
+  root = NULL;
+
+  while (transmem_list != NULL)
+    {
+      old = transmem_list;
+      transmem_list = transmem_list->next;
+      free (old);
+    }
+}
+#endif
diff --git a/lib/intl/dcngettext.c b/lib/intl/dcngettext.c
new file mode 100644
index 0000000..3d70b18
--- /dev/null
+++ b/lib/intl/dcngettext.c
@@ -0,0 +1,62 @@
+/* dcngettext.c - Implementation of the dcngettext(3) function. */
+
+/* Copyright (C) 1995-1999, 2000, 2001, 2002, 2006-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include "gettextP.h"
+#ifdef _LIBC
+# include <libintl.h>
+#else
+# include "libgnuintl.h"
+#endif
+
+/* @@ end of prolog @@ */
+
+/* Names for the libintl functions are a problem.  They must not clash
+   with existing names and they should follow ANSI C.  But this source
+   code is also used in GNU C Library where the names have a __
+   prefix.  So we have to make a difference here.  */
+#ifdef _LIBC
+# define DCNGETTEXT __dcngettext
+# define DCIGETTEXT __dcigettext
+#else
+# define DCNGETTEXT libintl_dcngettext
+# define DCIGETTEXT libintl_dcigettext
+#endif
+
+/* Look up MSGID in the DOMAINNAME message catalog for the current CATEGORY
+   locale.  */
+char *
+DCNGETTEXT (domainname, msgid1, msgid2, n, category)
+     const char *domainname;
+     const char *msgid1;
+     const char *msgid2;
+     unsigned long int n;
+     int category;
+{
+  return DCIGETTEXT (domainname, msgid1, msgid2, 1, n, category);
+}
+
+#ifdef _LIBC
+/* Alias for function name in GNU C Library.  */
+weak_alias (__dcngettext, dcngettext);
+#endif
diff --git a/lib/intl/dgettext.c b/lib/intl/dgettext.c
new file mode 100644
index 0000000..5351631
--- /dev/null
+++ b/lib/intl/dgettext.c
@@ -0,0 +1,61 @@
+/* dgettext.c - Implementation of the dgettext(3) function. */
+
+/* Copyright (C) 1995-1997, 2000, 2001, 2002, 2006-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include <locale.h>
+
+#include "gettextP.h"
+#ifdef _LIBC
+# include <libintl.h>
+#else
+# include "libgnuintl.h"
+#endif
+
+/* @@ end of prolog @@ */
+
+/* Names for the libintl functions are a problem.  They must not clash
+   with existing names and they should follow ANSI C.  But this source
+   code is also used in GNU C Library where the names have a __
+   prefix.  So we have to make a difference here.  */
+#ifdef _LIBC
+# define DGETTEXT __dgettext
+# define DCGETTEXT INTUSE(__dcgettext)
+#else
+# define DGETTEXT libintl_dgettext
+# define DCGETTEXT libintl_dcgettext
+#endif
+
+/* Look up MSGID in the DOMAINNAME message catalog of the current
+   LC_MESSAGES locale.  */
+char *
+DGETTEXT (domainname, msgid)
+     const char *domainname;
+     const char *msgid;
+{
+  return DCGETTEXT (domainname, msgid, LC_MESSAGES);
+}
+
+#ifdef _LIBC
+/* Alias for function name in GNU C Library.  */
+weak_alias (__dgettext, dgettext);
+#endif
diff --git a/lib/intl/dngettext.c b/lib/intl/dngettext.c
new file mode 100644
index 0000000..4276f3b
--- /dev/null
+++ b/lib/intl/dngettext.c
@@ -0,0 +1,63 @@
+/* dngettext.c - Implementation of the dngettext(3) function. */
+
+/*  Copyright (C) 1995-1997, 2000, 2001, 2002, 2005, 2006, 2008,2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include <locale.h>
+
+#include "gettextP.h"
+#ifdef _LIBC
+# include <libintl.h>
+#else
+# include "libgnuintl.h"
+#endif
+
+/* @@ end of prolog @@ */
+
+/* Names for the libintl functions are a problem.  They must not clash
+   with existing names and they should follow ANSI C.  But this source
+   code is also used in GNU C Library where the names have a __
+   prefix.  So we have to make a difference here.  */
+#ifdef _LIBC
+# define DNGETTEXT __dngettext
+# define DCNGETTEXT __dcngettext
+#else
+# define DNGETTEXT libintl_dngettext
+# define DCNGETTEXT libintl_dcngettext
+#endif
+
+/* Look up MSGID in the DOMAINNAME message catalog of the current
+   LC_MESSAGES locale and skip message according to the plural form.  */
+char *
+DNGETTEXT (domainname, msgid1, msgid2, n)
+     const char *domainname;
+     const char *msgid1;
+     const char *msgid2;
+     unsigned long int n;
+{
+  return DCNGETTEXT (domainname, msgid1, msgid2, n, LC_MESSAGES);
+}
+
+#ifdef _LIBC
+/* Alias for function name in GNU C Library.  */
+weak_alias (__dngettext, dngettext);
+#endif
diff --git a/lib/intl/eval-plural.h b/lib/intl/eval-plural.h
new file mode 100644
index 0000000..3441c74
--- /dev/null
+++ b/lib/intl/eval-plural.h
@@ -0,0 +1,116 @@
+/* eval-plural.c - Plural expression evaluation. */
+
+/* Copyright (C) 2000-2002, 2006-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef STATIC
+#define STATIC static
+#endif
+
+/* Evaluate the plural expression and return an index value.  */
+STATIC unsigned long int plural_eval PARAMS ((struct expression *pexp,
+					      unsigned long int n))
+     internal_function;
+
+STATIC
+unsigned long int
+internal_function
+plural_eval (pexp, n)
+     struct expression *pexp;
+     unsigned long int n;
+{
+  switch (pexp->nargs)
+    {
+    case 0:
+      switch (pexp->operation)
+	{
+	case var:
+	  return n;
+	case num:
+	  return pexp->val.num;
+	default:
+	  break;
+	}
+      /* NOTREACHED */
+      break;
+    case 1:
+      {
+	/* pexp->operation must be lnot.  */
+	unsigned long int arg = plural_eval (pexp->val.args[0], n);
+	return ! arg;
+      }
+    case 2:
+      {
+	unsigned long int leftarg = plural_eval (pexp->val.args[0], n);
+	if (pexp->operation == lor)
+	  return leftarg || plural_eval (pexp->val.args[1], n);
+	else if (pexp->operation == land)
+	  return leftarg && plural_eval (pexp->val.args[1], n);
+	else
+	  {
+	    unsigned long int rightarg = plural_eval (pexp->val.args[1], n);
+
+	    switch (pexp->operation)
+	      {
+	      case mult:
+		return leftarg * rightarg;
+	      case divide:
+#if !INTDIV0_RAISES_SIGFPE
+		if (rightarg == 0)
+		  raise (SIGFPE);
+#endif
+		return leftarg / rightarg;
+	      case module:
+#if !INTDIV0_RAISES_SIGFPE
+		if (rightarg == 0)
+		  raise (SIGFPE);
+#endif
+		return leftarg % rightarg;
+	      case plus:
+		return leftarg + rightarg;
+	      case minus:
+		return leftarg - rightarg;
+	      case less_than:
+		return leftarg < rightarg;
+	      case greater_than:
+		return leftarg > rightarg;
+	      case less_or_equal:
+		return leftarg <= rightarg;
+	      case greater_or_equal:
+		return leftarg >= rightarg;
+	      case equal:
+		return leftarg == rightarg;
+	      case not_equal:
+		return leftarg != rightarg;
+	      default:
+		break;
+	      }
+	  }
+	/* NOTREACHED */
+	break;
+      }
+    case 3:
+      {
+	/* pexp->operation must be qmop.  */
+	unsigned long int boolarg = plural_eval (pexp->val.args[0], n);
+	return plural_eval (pexp->val.args[boolarg ? 1 : 2], n);
+      }
+    }
+  /* NOTREACHED */
+  return 0;
+}
diff --git a/lib/intl/explodename.c b/lib/intl/explodename.c
new file mode 100644
index 0000000..adc3640
--- /dev/null
+++ b/lib/intl/explodename.c
@@ -0,0 +1,195 @@
+/* explodename.c */
+
+/* Copyright (C) 1995-1998, 2000, 2001, 2005-2009 Free Software Foundation, Inc.
+   Contributed by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include <stdlib.h>
+#include <string.h>
+#include <sys/types.h>
+
+#include "loadinfo.h"
+
+/* On some strange systems still no definition of NULL is found.  Sigh!  */
+#ifndef NULL
+# if defined __STDC__ && __STDC__
+#  define NULL ((void *) 0)
+# else
+#  define NULL 0
+# endif
+#endif
+
+/* @@ end of prolog @@ */
+
+char *
+_nl_find_language (name)
+     const char *name;
+{
+  while (name[0] != '\0' && name[0] != '_' && name[0] != '@'
+	 && name[0] != '+' && name[0] != ',')
+    ++name;
+
+  return (char *) name;
+}
+
+
+int
+_nl_explode_name (name, language, modifier, territory, codeset,
+		  normalized_codeset, special, sponsor, revision)
+     char *name;
+     const char **language;
+     const char **modifier;
+     const char **territory;
+     const char **codeset;
+     const char **normalized_codeset;
+     const char **special;
+     const char **sponsor;
+     const char **revision;
+{
+  enum { undecided, xpg, cen } syntax;
+  char *cp;
+  int mask;
+
+  *modifier = NULL;
+  *territory = NULL;
+  *codeset = NULL;
+  *normalized_codeset = NULL;
+  *special = NULL;
+  *sponsor = NULL;
+  *revision = NULL;
+
+  /* Now we determine the single parts of the locale name.  First
+     look for the language.  Termination symbols are `_' and `@' if
+     we use XPG4 style, and `_', `+', and `,' if we use CEN syntax.  */
+  mask = 0;
+  syntax = undecided;
+  *language = cp = name;
+  cp = _nl_find_language (*language);
+
+  if (*language == cp)
+    /* This does not make sense: language has to be specified.  Use
+       this entry as it is without exploding.  Perhaps it is an alias.  */
+    cp = strchr (*language, '\0');
+  else if (cp[0] == '_')
+    {
+      /* Next is the territory.  */
+      cp[0] = '\0';
+      *territory = ++cp;
+
+      while (cp[0] != '\0' && cp[0] != '.' && cp[0] != '@'
+	     && cp[0] != '+' && cp[0] != ',' && cp[0] != '_')
+	++cp;
+
+      mask |= TERRITORY;
+
+      if (cp[0] == '.')
+	{
+	  /* Next is the codeset.  */
+	  syntax = xpg;
+	  cp[0] = '\0';
+	  *codeset = ++cp;
+
+	  while (cp[0] != '\0' && cp[0] != '@')
+	    ++cp;
+
+	  mask |= XPG_CODESET;
+
+	  if (*codeset != cp && (*codeset)[0] != '\0')
+	    {
+	      *normalized_codeset = _nl_normalize_codeset (*codeset,
+							   cp - *codeset);
+	      if (strcmp (*codeset, *normalized_codeset) == 0)
+		free ((char *) *normalized_codeset);
+	      else
+		mask |= XPG_NORM_CODESET;
+	    }
+	}
+    }
+
+  if (cp[0] == '@' || (syntax != xpg && cp[0] == '+'))
+    {
+      /* Next is the modifier.  */
+      syntax = cp[0] == '@' ? xpg : cen;
+      cp[0] = '\0';
+      *modifier = ++cp;
+
+      while (syntax == cen && cp[0] != '\0' && cp[0] != '+'
+	     && cp[0] != ',' && cp[0] != '_')
+	++cp;
+
+      mask |= XPG_MODIFIER | CEN_AUDIENCE;
+    }
+
+  if (syntax != xpg && (cp[0] == '+' || cp[0] == ',' || cp[0] == '_'))
+    {
+      syntax = cen;
+
+      if (cp[0] == '+')
+	{
+ 	  /* Next is special application (CEN syntax).  */
+	  cp[0] = '\0';
+	  *special = ++cp;
+
+	  while (cp[0] != '\0' && cp[0] != ',' && cp[0] != '_')
+	    ++cp;
+
+	  mask |= CEN_SPECIAL;
+	}
+
+      if (cp[0] == ',')
+	{
+ 	  /* Next is sponsor (CEN syntax).  */
+	  cp[0] = '\0';
+	  *sponsor = ++cp;
+
+	  while (cp[0] != '\0' && cp[0] != '_')
+	    ++cp;
+
+	  mask |= CEN_SPONSOR;
+	}
+
+      if (cp[0] == '_')
+	{
+ 	  /* Next is revision (CEN syntax).  */
+	  cp[0] = '\0';
+	  *revision = ++cp;
+
+	  mask |= CEN_REVISION;
+	}
+    }
+
+  /* For CEN syntax values it might be important to have the
+     separator character in the file name, not for XPG syntax.  */
+  if (syntax == xpg)
+    {
+      if (*territory != NULL && (*territory)[0] == '\0')
+	mask &= ~TERRITORY;
+
+      if (*codeset != NULL && (*codeset)[0] == '\0')
+	mask &= ~XPG_CODESET;
+
+      if (*modifier != NULL && (*modifier)[0] == '\0')
+	mask &= ~XPG_MODIFIER;
+    }
+
+  return mask;
+}
diff --git a/lib/intl/finddomain.c b/lib/intl/finddomain.c
new file mode 100644
index 0000000..69a3586
--- /dev/null
+++ b/lib/intl/finddomain.c
@@ -0,0 +1,197 @@
+/* finddomain.c - Handle list of needed message catalogs */
+
+/* Copyright (C) 1995-1999, 2000, 2001, 2005-2009 Free Software Foundation, Inc.
+   Written by Ulrich Drepper <drepper@gnu.org>, 1995.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include <stdio.h>
+#include <sys/types.h>
+#include <stdlib.h>
+#include <string.h>
+
+#if defined HAVE_UNISTD_H || defined _LIBC
+# include <unistd.h>
+#endif
+
+#include "gettextP.h"
+#ifdef _LIBC
+# include <libintl.h>
+#else
+# include "libgnuintl.h"
+#endif
+
+/* @@ end of prolog @@ */
+/* List of already loaded domains.  */
+static struct loaded_l10nfile *_nl_loaded_domains;
+
+
+/* Return a data structure describing the message catalog described by
+   the DOMAINNAME and CATEGORY parameters with respect to the currently
+   established bindings.  */
+struct loaded_l10nfile *
+internal_function
+_nl_find_domain (dirname, locale, domainname, domainbinding)
+     const char *dirname;
+     char *locale;
+     const char *domainname;
+     struct binding *domainbinding;
+{
+  struct loaded_l10nfile *retval;
+  const char *language;
+  const char *modifier;
+  const char *territory;
+  const char *codeset;
+  const char *normalized_codeset;
+  const char *special;
+  const char *sponsor;
+  const char *revision;
+  const char *alias_value;
+  int mask;
+
+  /* LOCALE can consist of up to four recognized parts for the XPG syntax:
+
+		language[_territory[.codeset]][@modifier]
+
+     and six parts for the CEN syntax:
+
+	language[_territory][+audience][+special][,[sponsor][_revision]]
+
+     Beside the first part all of them are allowed to be missing.  If
+     the full specified locale is not found, the less specific one are
+     looked for.  The various parts will be stripped off according to
+     the following order:
+		(1) revision
+		(2) sponsor
+		(3) special
+		(4) codeset
+		(5) normalized codeset
+		(6) territory
+		(7) audience/modifier
+   */
+
+  /* If we have already tested for this locale entry there has to
+     be one data set in the list of loaded domains.  */
+  retval = _nl_make_l10nflist (&_nl_loaded_domains, dirname,
+			       strlen (dirname) + 1, 0, locale, NULL, NULL,
+			       NULL, NULL, NULL, NULL, NULL, domainname, 0);
+  if (retval != NULL)
+    {
+      /* We know something about this locale.  */
+      int cnt;
+
+      if (retval->decided == 0)
+	_nl_load_domain (retval, domainbinding);
+
+      if (retval->data != NULL)
+	return retval;
+
+      for (cnt = 0; retval->successor[cnt] != NULL; ++cnt)
+	{
+	  if (retval->successor[cnt]->decided == 0)
+	    _nl_load_domain (retval->successor[cnt], domainbinding);
+
+	  if (retval->successor[cnt]->data != NULL)
+	    break;
+	}
+      return cnt >= 0 ? retval : NULL;
+      /* NOTREACHED */
+    }
+
+  /* See whether the locale value is an alias.  If yes its value
+     *overwrites* the alias name.  No test for the original value is
+     done.  */
+  alias_value = _nl_expand_alias (locale);
+  if (alias_value != NULL)
+    {
+#if defined _LIBC || defined HAVE_STRDUP
+      locale = strdup (alias_value);
+      if (locale == NULL)
+	return NULL;
+#else
+      size_t len = strlen (alias_value) + 1;
+      locale = (char *) malloc (len);
+      if (locale == NULL)
+	return NULL;
+
+      memcpy (locale, alias_value, len);
+#endif
+    }
+
+  /* Now we determine the single parts of the locale name.  First
+     look for the language.  Termination symbols are `_' and `@' if
+     we use XPG4 style, and `_', `+', and `,' if we use CEN syntax.  */
+  mask = _nl_explode_name (locale, &language, &modifier, &territory,
+			   &codeset, &normalized_codeset, &special,
+			   &sponsor, &revision);
+
+  /* Create all possible locale entries which might be interested in
+     generalization.  */
+  retval = _nl_make_l10nflist (&_nl_loaded_domains, dirname,
+			       strlen (dirname) + 1, mask, language, territory,
+			       codeset, normalized_codeset, modifier, special,
+			       sponsor, revision, domainname, 1);
+  if (retval == NULL)
+    /* This means we are out of core.  */
+    return NULL;
+
+  if (retval->decided == 0)
+    _nl_load_domain (retval, domainbinding);
+  if (retval->data == NULL)
+    {
+      int cnt;
+      for (cnt = 0; retval->successor[cnt] != NULL; ++cnt)
+	{
+	  if (retval->successor[cnt]->decided == 0)
+	    _nl_load_domain (retval->successor[cnt], domainbinding);
+	  if (retval->successor[cnt]->data != NULL)
+	    break;
+	}
+    }
+
+  /* The room for an alias was dynamically allocated.  Free it now.  */
+  if (alias_value != NULL)
+    free (locale);
+
+  /* The space for normalized_codeset is dynamically allocated.  Free it.  */
+  if (mask & XPG_NORM_CODESET)
+    free ((void *) normalized_codeset);
+
+  return retval;
+}
+
+
+#ifdef _LIBC
+libc_freeres_fn (free_mem)
+{
+  struct loaded_l10nfile *runp = _nl_loaded_domains;
+
+  while (runp != NULL)
+    {
+      struct loaded_l10nfile *here = runp;
+      if (runp->data != NULL)
+	_nl_unload_domain ((struct loaded_domain *) runp->data);
+      runp = runp->next;
+      free ((char *) here->filename);
+      free (here);
+    }
+}
+#endif
diff --git a/lib/intl/gettext.c b/lib/intl/gettext.c
new file mode 100644
index 0000000..fd3fa0f
--- /dev/null
+++ b/lib/intl/gettext.c
@@ -0,0 +1,66 @@
+/* gettext.c - Implementation of gettext(3) function. */
+
+/* Copyright (C) 1995, 1997, 2000, 2001, 2002, 2005-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#ifdef _LIBC
+# define __need_NULL
+# include <stddef.h>
+#else
+# include <stdlib.h>		/* Just for NULL.  */
+#endif
+
+#include "gettextP.h"
+#ifdef _LIBC
+# include <libintl.h>
+#else
+# include "libgnuintl.h"
+#endif
+
+/* @@ end of prolog @@ */
+
+/* Names for the libintl functions are a problem.  They must not clash
+   with existing names and they should follow ANSI C.  But this source
+   code is also used in GNU C Library where the names have a __
+   prefix.  So we have to make a difference here.  */
+#ifdef _LIBC
+# define GETTEXT __gettext
+# define DCGETTEXT INTUSE(__dcgettext)
+#else
+# define GETTEXT libintl_gettext
+# define DCGETTEXT libintl_dcgettext
+#endif
+
+/* Look up MSGID in the current default message catalog for the current
+   LC_MESSAGES locale.  If not found, returns MSGID itself (the default
+   text).  */
+char *
+GETTEXT (msgid)
+     const char *msgid;
+{
+  return DCGETTEXT (NULL, msgid, LC_MESSAGES);
+}
+
+#ifdef _LIBC
+/* Alias for function name in GNU C Library.  */
+weak_alias (__gettext, gettext);
+#endif
diff --git a/lib/intl/gettextP.h b/lib/intl/gettextP.h
new file mode 100644
index 0000000..5c137e5
--- /dev/null
+++ b/lib/intl/gettextP.h
@@ -0,0 +1,226 @@
+/* gettextP.h - Header describing internals of libintl library. */
+
+/* Copyright (C) 1995-1999, 2000-2003, 2005-2009 Free Software Foundation, Inc.
+   Written by Ulrich Drepper <drepper@cygnus.com>, 1995.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _GETTEXTP_H
+#define _GETTEXTP_H
+
+#include <stddef.h>		/* Get size_t.  */
+
+#ifdef _LIBC
+# include "../iconv/gconv_int.h"
+#else
+# if HAVE_ICONV
+#  include <iconv.h>
+# endif
+#endif
+
+#include "loadinfo.h"
+
+#include "gmo.h"		/* Get nls_uint32.  */
+
+/* @@ end of prolog @@ */
+
+#ifndef PARAMS
+# if __STDC__ || defined __GNUC__ || defined __SUNPRO_C || defined __cplusplus || __PROTOTYPES
+#  define PARAMS(args) args
+# else
+#  define PARAMS(args) ()
+# endif
+#endif
+
+#ifndef internal_function
+# define internal_function
+#endif
+
+#ifndef attribute_hidden
+# define attribute_hidden
+#endif
+
+/* Tell the compiler when a conditional or integer expression is
+   almost always true or almost always false.  */
+#ifndef HAVE_BUILTIN_EXPECT
+# define __builtin_expect(expr, val) (expr)
+#endif
+
+#ifndef W
+# define W(flag, data) ((flag) ? SWAP (data) : (data))
+#endif
+
+
+#ifdef _LIBC
+# include <byteswap.h>
+# define SWAP(i) bswap_32 (i)
+#else
+static inline nls_uint32
+SWAP (i)
+     nls_uint32 i;
+{
+  return (i << 24) | ((i & 0xff00) << 8) | ((i >> 8) & 0xff00) | (i >> 24);
+}
+#endif
+
+
+/* In-memory representation of system dependent string.  */
+struct sysdep_string_desc
+{
+  /* Length of addressed string, including the trailing NUL.  */
+  size_t length;
+  /* Pointer to addressed string.  */
+  const char *pointer;
+};
+
+/* The representation of an opened message catalog.  */
+struct loaded_domain
+{
+  /* Pointer to memory containing the .mo file.  */
+  const char *data;
+  /* 1 if the memory is mmap()ed, 0 if the memory is malloc()ed.  */
+  int use_mmap;
+  /* Size of mmap()ed memory.  */
+  size_t mmap_size;
+  /* 1 if the .mo file uses a different endianness than this machine.  */
+  int must_swap;
+  /* Pointer to additional malloc()ed memory.  */
+  void *malloced;
+
+  /* Number of static strings pairs.  */
+  nls_uint32 nstrings;
+  /* Pointer to descriptors of original strings in the file.  */
+  const struct string_desc *orig_tab;
+  /* Pointer to descriptors of translated strings in the file.  */
+  const struct string_desc *trans_tab;
+
+  /* Number of system dependent strings pairs.  */
+  nls_uint32 n_sysdep_strings;
+  /* Pointer to descriptors of original sysdep strings.  */
+  const struct sysdep_string_desc *orig_sysdep_tab;
+  /* Pointer to descriptors of translated sysdep strings.  */
+  const struct sysdep_string_desc *trans_sysdep_tab;
+
+  /* Size of hash table.  */
+  nls_uint32 hash_size;
+  /* Pointer to hash table.  */
+  const nls_uint32 *hash_tab;
+  /* 1 if the hash table uses a different endianness than this machine.  */
+  int must_swap_hash_tab;
+
+  int codeset_cntr;
+#ifdef _LIBC
+  __gconv_t conv;
+#else
+# if HAVE_ICONV
+  iconv_t conv;
+# endif
+#endif
+  char **conv_tab;
+
+  struct expression *plural;
+  unsigned long int nplurals;
+};
+
+/* We want to allocate a string at the end of the struct.  But ISO C
+   doesn't allow zero sized arrays.  */
+#ifdef __GNUC__
+# define ZERO 0
+#else
+# define ZERO 1
+#endif
+
+/* A set of settings bound to a message domain.  Used to store settings
+   from bindtextdomain() and bind_textdomain_codeset().  */
+struct binding
+{
+  struct binding *next;
+  char *dirname;
+  int codeset_cntr;	/* Incremented each time codeset changes.  */
+  char *codeset;
+  char domainname[ZERO];
+};
+
+/* A counter which is incremented each time some previous translations
+   become invalid.
+   This variable is part of the external ABI of the GNU libintl.  */
+extern int _nl_msg_cat_cntr;
+
+#ifndef _LIBC
+const char *_nl_locale_name PARAMS ((int category, const char *categoryname));
+#endif
+
+struct loaded_l10nfile *_nl_find_domain PARAMS ((const char *__dirname,
+						 char *__locale,
+						 const char *__domainname,
+					      struct binding *__domainbinding))
+     internal_function;
+void _nl_load_domain PARAMS ((struct loaded_l10nfile *__domain,
+			      struct binding *__domainbinding))
+     internal_function;
+void _nl_unload_domain PARAMS ((struct loaded_domain *__domain))
+     internal_function;
+const char *_nl_init_domain_conv PARAMS ((struct loaded_l10nfile *__domain_file,
+					  struct loaded_domain *__domain,
+					  struct binding *__domainbinding))
+     internal_function;
+void _nl_free_domain_conv PARAMS ((struct loaded_domain *__domain))
+     internal_function;
+
+char *_nl_find_msg PARAMS ((struct loaded_l10nfile *domain_file,
+			    struct binding *domainbinding,
+			    const char *msgid, size_t *lengthp))
+     internal_function;
+
+#ifdef _LIBC
+extern char *__gettext PARAMS ((const char *__msgid));
+extern char *__dgettext PARAMS ((const char *__domainname,
+				 const char *__msgid));
+extern char *__dcgettext PARAMS ((const char *__domainname,
+				  const char *__msgid, int __category));
+extern char *__ngettext PARAMS ((const char *__msgid1, const char *__msgid2,
+				 unsigned long int __n));
+extern char *__dngettext PARAMS ((const char *__domainname,
+				  const char *__msgid1, const char *__msgid2,
+				  unsigned long int n));
+extern char *__dcngettext PARAMS ((const char *__domainname,
+				   const char *__msgid1, const char *__msgid2,
+				   unsigned long int __n, int __category));
+extern char *__dcigettext PARAMS ((const char *__domainname,
+				   const char *__msgid1, const char *__msgid2,
+				   int __plural, unsigned long int __n,
+				   int __category));
+extern char *__textdomain PARAMS ((const char *__domainname));
+extern char *__bindtextdomain PARAMS ((const char *__domainname,
+				       const char *__dirname));
+extern char *__bind_textdomain_codeset PARAMS ((const char *__domainname,
+						const char *__codeset));
+#else
+/* Declare the exported libintl_* functions, in a way that allows us to
+   call them under their real name.  */
+# define _INTL_REDIRECT_MACROS
+# include "libgnuintl.h"
+extern char *libintl_dcigettext PARAMS ((const char *__domainname,
+					 const char *__msgid1,
+					 const char *__msgid2,
+					 int __plural, unsigned long int __n,
+					 int __category));
+#endif
+
+/* @@ begin of epilog @@ */
+
+#endif /* gettextP.h  */
diff --git a/lib/intl/gmo.h b/lib/intl/gmo.h
new file mode 100644
index 0000000..2c57851
--- /dev/null
+++ b/lib/intl/gmo.h
@@ -0,0 +1,150 @@
+/* gmo.h - Description of GNU message catalog format: general file layout. */
+
+/* Copyright (C) 1995, 1997, 2000-2002, 2005-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _GETTEXT_H
+#define _GETTEXT_H 1
+
+#include <limits.h>
+
+/* @@ end of prolog @@ */
+
+/* The magic number of the GNU message catalog format.  */
+#define _MAGIC 0x950412de
+#define _MAGIC_SWAPPED 0xde120495
+
+/* Revision number of the currently used .mo (binary) file format.  */
+#define MO_REVISION_NUMBER 0
+
+/* The following contortions are an attempt to use the C preprocessor
+   to determine an unsigned integral type that is 32 bits wide.  An
+   alternative approach is to use autoconf's AC_CHECK_SIZEOF macro, but
+   as of version autoconf-2.13, the AC_CHECK_SIZEOF macro doesn't work
+   when cross-compiling.  */
+
+#if __STDC__
+# define UINT_MAX_32_BITS 4294967295U
+#else
+# define UINT_MAX_32_BITS 0xFFFFFFFF
+#endif
+
+/* If UINT_MAX isn't defined, assume it's a 32-bit type.
+   This should be valid for all systems GNU cares about because
+   that doesn't include 16-bit systems, and only modern systems
+   (that certainly have <limits.h>) have 64+-bit integral types.  */
+
+#ifndef UINT_MAX
+# define UINT_MAX UINT_MAX_32_BITS
+#endif
+
+#if UINT_MAX == UINT_MAX_32_BITS
+typedef unsigned nls_uint32;
+#else
+# if USHRT_MAX == UINT_MAX_32_BITS
+typedef unsigned short nls_uint32;
+# else
+#  if ULONG_MAX == UINT_MAX_32_BITS
+typedef unsigned long nls_uint32;
+#  else
+  /* The following line is intended to throw an error.  Using #error is
+     not portable enough.  */
+  "Cannot determine unsigned 32-bit data type."
+#  endif
+# endif
+#endif
+
+
+/* Header for binary .mo file format.  */
+struct mo_file_header
+{
+  /* The magic number.  */
+  nls_uint32 magic;
+  /* The revision number of the file format.  */
+  nls_uint32 revision;
+
+  /* The following are only used in .mo files with major revision 0.  */
+
+  /* The number of strings pairs.  */
+  nls_uint32 nstrings;
+  /* Offset of table with start offsets of original strings.  */
+  nls_uint32 orig_tab_offset;
+  /* Offset of table with start offsets of translated strings.  */
+  nls_uint32 trans_tab_offset;
+  /* Size of hash table.  */
+  nls_uint32 hash_tab_size;
+  /* Offset of first hash table entry.  */
+  nls_uint32 hash_tab_offset;
+
+  /* The following are only used in .mo files with minor revision >= 1.  */
+
+  /* The number of system dependent segments.  */
+  nls_uint32 n_sysdep_segments;
+  /* Offset of table describing system dependent segments.  */
+  nls_uint32 sysdep_segments_offset;
+  /* The number of system dependent strings pairs.  */
+  nls_uint32 n_sysdep_strings;
+  /* Offset of table with start offsets of original sysdep strings.  */
+  nls_uint32 orig_sysdep_tab_offset;
+  /* Offset of table with start offsets of translated sysdep strings.  */
+  nls_uint32 trans_sysdep_tab_offset;
+};
+
+/* Descriptor for static string contained in the binary .mo file.  */
+struct string_desc
+{
+  /* Length of addressed string, not including the trailing NUL.  */
+  nls_uint32 length;
+  /* Offset of string in file.  */
+  nls_uint32 offset;
+};
+
+/* The following are only used in .mo files with minor revision >= 1.  */
+
+/* Descriptor for system dependent string segment.  */
+struct sysdep_segment
+{
+  /* Length of addressed string, including the trailing NUL.  */
+  nls_uint32 length;
+  /* Offset of string in file.  */
+  nls_uint32 offset;
+};
+
+/* Descriptor for system dependent string.  */
+struct sysdep_string
+{
+  /* Offset of static string segments in file.  */
+  nls_uint32 offset;
+  /* Alternating sequence of static and system dependent segments.
+     The last segment is a static segment, including the trailing NUL.  */
+  struct segment_pair
+  {
+    /* Size of static segment.  */
+    nls_uint32 segsize;
+    /* Reference to system dependent string segment, or ~0 at the end.  */
+    nls_uint32 sysdepref;
+  } segments[1];
+};
+
+/* Marker for the end of the segments[] array.  This has the value 0xFFFFFFFF,
+   regardless whether 'int' is 16 bit, 32 bit, or 64 bit.  */
+#define SEGMENTS_END ((nls_uint32) ~0)
+
+/* @@ begin of epilog @@ */
+
+#endif	/* gettext.h  */
diff --git a/lib/intl/hash-string.h b/lib/intl/hash-string.h
new file mode 100644
index 0000000..b5a7d41
--- /dev/null
+++ b/lib/intl/hash-string.h
@@ -0,0 +1,61 @@
+/* hash-string.h - Description of GNU message catalog format: string hashing function. */
+
+/* Copyright (C) 1995, 1997, 1998, 2000, 2001, 2005-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* @@ end of prolog @@ */
+
+#ifndef PARAMS
+# if __STDC__ || defined __GNUC__ || defined __SUNPRO_C || defined __cplusplus || __PROTOTYPES
+#  define PARAMS(Args) Args
+# else
+#  define PARAMS(Args) ()
+# endif
+#endif
+
+/* We assume to have `unsigned long int' value with at least 32 bits.  */
+#define HASHWORDBITS 32
+
+
+/* Defines the so called `hashpjw' function by P.J. Weinberger
+   [see Aho/Sethi/Ullman, COMPILERS: Principles, Techniques and Tools,
+   1986, 1987 Bell Telephone Laboratories, Inc.]  */
+static unsigned long int hash_string PARAMS ((const char *__str_param));
+
+static inline unsigned long int
+hash_string (str_param)
+     const char *str_param;
+{
+  unsigned long int hval, g;
+  const char *str = str_param;
+
+  /* Compute the hash value for the given string.  */
+  hval = 0;
+  while (*str != '\0')
+    {
+      hval <<= 4;
+      hval += (unsigned long int) *str++;
+      g = hval & ((unsigned long int) 0xf << (HASHWORDBITS - 4));
+      if (g != 0)
+	{
+	  hval ^= g >> (HASHWORDBITS - 8);
+	  hval ^= g;
+	}
+    }
+  return hval;
+}
diff --git a/lib/intl/intl-compat.c b/lib/intl/intl-compat.c
new file mode 100644
index 0000000..7f32349
--- /dev/null
+++ b/lib/intl/intl-compat.c
@@ -0,0 +1,152 @@
+/* intl-compat.c - Stub functions to call gettext functions from GNU gettext library. */
+
+/* Copyright (C) 1995, 2000-2003, 2005-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include "gettextP.h"
+
+/* @@ end of prolog @@ */
+
+/* This file redirects the gettext functions (without prefix) to those
+   defined in the included GNU libintl library (with "libintl_" prefix).
+   It is compiled into libintl in order to make the AM_GNU_GETTEXT test
+   of gettext <= 0.11.2 work with the libintl library >= 0.11.3 which
+   has the redirections primarily in the <libintl.h> include file.
+   It is also compiled into libgnuintl so that libgnuintl.so can be used
+   as LD_PRELOADable library on glibc systems, to provide the extra
+   features that the functions in the libc don't have (namely, logging).  */
+
+
+#undef gettext
+#undef dgettext
+#undef dcgettext
+#undef ngettext
+#undef dngettext
+#undef dcngettext
+#undef textdomain
+#undef bindtextdomain
+#undef bind_textdomain_codeset
+
+
+/* When building a DLL, we must export some functions.  Note that because
+   the functions are only defined for binary backward compatibility, we
+   don't need to use __declspec(dllimport) in any case.  */
+#if defined _MSC_VER && BUILDING_DLL
+# define DLL_EXPORTED __declspec(dllexport)
+#else
+# define DLL_EXPORTED
+#endif
+
+
+DLL_EXPORTED
+char *
+gettext (msgid)
+     const char *msgid;
+{
+  return libintl_gettext (msgid);
+}
+
+
+DLL_EXPORTED
+char *
+dgettext (domainname, msgid)
+     const char *domainname;
+     const char *msgid;
+{
+  return libintl_dgettext (domainname, msgid);
+}
+
+
+DLL_EXPORTED
+char *
+dcgettext (domainname, msgid, category)
+     const char *domainname;
+     const char *msgid;
+     int category;
+{
+  return libintl_dcgettext (domainname, msgid, category);
+}
+
+
+DLL_EXPORTED
+char *
+ngettext (msgid1, msgid2, n)
+     const char *msgid1;
+     const char *msgid2;
+     unsigned long int n;
+{
+  return libintl_ngettext (msgid1, msgid2, n);
+}
+
+
+DLL_EXPORTED
+char *
+dngettext (domainname, msgid1, msgid2, n)
+     const char *domainname;
+     const char *msgid1;
+     const char *msgid2;
+     unsigned long int n;
+{
+  return libintl_dngettext (domainname, msgid1, msgid2, n);
+}
+
+
+DLL_EXPORTED
+char *
+dcngettext (domainname, msgid1, msgid2, n, category)
+     const char *domainname;
+     const char *msgid1;
+     const char *msgid2;
+     unsigned long int n;
+     int category;
+{
+  return libintl_dcngettext (domainname, msgid1, msgid2, n, category);
+}
+
+
+DLL_EXPORTED
+char *
+textdomain (domainname)
+     const char *domainname;
+{
+  return libintl_textdomain (domainname);
+}
+
+
+DLL_EXPORTED
+char *
+bindtextdomain (domainname, dirname)
+     const char *domainname;
+     const char *dirname;
+{
+  return libintl_bindtextdomain (domainname, dirname);
+}
+
+
+DLL_EXPORTED
+char *
+bind_textdomain_codeset (domainname, codeset)
+     const char *domainname;
+     const char *codeset;
+{
+  return libintl_bind_textdomain_codeset (domainname, codeset);
+}
diff --git a/lib/intl/l10nflist.c b/lib/intl/l10nflist.c
new file mode 100644
index 0000000..4ce284a
--- /dev/null
+++ b/lib/intl/l10nflist.c
@@ -0,0 +1,459 @@
+/* l10nflist.c - make localization file list. */
+
+/* Copyright (C) 1995-1999, 2000, 2001, 2002, 2005-2009 Free Software Foundation, Inc.
+   Contributed by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* Tell glibc's <string.h> to provide a prototype for stpcpy().
+   This must come before <config.h> because <config.h> may include
+   <features.h>, and once <features.h> has been included, it's too late.  */
+#ifndef _GNU_SOURCE
+# define _GNU_SOURCE	1
+#endif
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include <string.h>
+
+#if defined _LIBC || defined HAVE_ARGZ_H
+# include <argz.h>
+#endif
+#include <ctype.h>
+#include <sys/types.h>
+#include <stdlib.h>
+
+#include "loadinfo.h"
+
+/* On some strange systems still no definition of NULL is found.  Sigh!  */
+#ifndef NULL
+# if defined __STDC__ && __STDC__
+#  define NULL ((void *) 0)
+# else
+#  define NULL 0
+# endif
+#endif
+
+/* @@ end of prolog @@ */
+
+#ifdef _LIBC
+/* Rename the non ANSI C functions.  This is required by the standard
+   because some ANSI C functions will require linking with this object
+   file and the name space must not be polluted.  */
+# ifndef stpcpy
+#  define stpcpy(dest, src) __stpcpy(dest, src)
+# endif
+#else
+# ifndef HAVE_STPCPY
+static char *stpcpy PARAMS ((char *dest, const char *src));
+# endif
+#endif
+
+/* Pathname support.
+   ISSLASH(C)           tests whether C is a directory separator character.
+   IS_ABSOLUTE_PATH(P)  tests whether P is an absolute path.  If it is not,
+                        it may be concatenated to a directory pathname.
+ */
+#if defined _WIN32 || defined __WIN32__ || defined __EMX__ || defined __DJGPP__
+  /* Win32, OS/2, DOS */
+# define ISSLASH(C) ((C) == '/' || (C) == '\\')
+# define HAS_DEVICE(P) \
+    ((((P)[0] >= 'A' && (P)[0] <= 'Z') || ((P)[0] >= 'a' && (P)[0] <= 'z')) \
+     && (P)[1] == ':')
+# define IS_ABSOLUTE_PATH(P) (ISSLASH ((P)[0]) || HAS_DEVICE (P))
+#else
+  /* Unix */
+# define ISSLASH(C) ((C) == '/')
+# define IS_ABSOLUTE_PATH(P) ISSLASH ((P)[0])
+#endif
+
+/* Define function which are usually not available.  */
+
+#if !defined _LIBC && !defined HAVE___ARGZ_COUNT
+/* Returns the number of strings in ARGZ.  */
+static size_t argz_count__ PARAMS ((const char *argz, size_t len));
+
+static size_t
+argz_count__ (argz, len)
+     const char *argz;
+     size_t len;
+{
+  size_t count = 0;
+  while (len > 0)
+    {
+      size_t part_len = strlen (argz);
+      argz += part_len + 1;
+      len -= part_len + 1;
+      count++;
+    }
+  return count;
+}
+# undef __argz_count
+# define __argz_count(argz, len) argz_count__ (argz, len)
+#else
+# ifdef _LIBC
+#  define __argz_count(argz, len) INTUSE(__argz_count) (argz, len)
+# endif
+#endif	/* !_LIBC && !HAVE___ARGZ_COUNT */
+
+#if !defined _LIBC && !defined HAVE___ARGZ_STRINGIFY
+/* Make '\0' separated arg vector ARGZ printable by converting all the '\0's
+   except the last into the character SEP.  */
+static void argz_stringify__ PARAMS ((char *argz, size_t len, int sep));
+
+static void
+argz_stringify__ (argz, len, sep)
+     char *argz;
+     size_t len;
+     int sep;
+{
+  while (len > 0)
+    {
+      size_t part_len = strlen (argz);
+      argz += part_len;
+      len -= part_len + 1;
+      if (len > 0)
+	*argz++ = sep;
+    }
+}
+# undef __argz_stringify
+# define __argz_stringify(argz, len, sep) argz_stringify__ (argz, len, sep)
+#else
+# ifdef _LIBC
+#  define __argz_stringify(argz, len, sep) \
+  INTUSE(__argz_stringify) (argz, len, sep)
+# endif
+#endif	/* !_LIBC && !HAVE___ARGZ_STRINGIFY */
+
+#if !defined _LIBC && !defined HAVE___ARGZ_NEXT
+static char *argz_next__ PARAMS ((char *argz, size_t argz_len,
+				  const char *entry));
+
+static char *
+argz_next__ (argz, argz_len, entry)
+     char *argz;
+     size_t argz_len;
+     const char *entry;
+{
+  if (entry)
+    {
+      if (entry < argz + argz_len)
+        entry = strchr (entry, '\0') + 1;
+
+      return entry >= argz + argz_len ? NULL : (char *) entry;
+    }
+  else
+    if (argz_len > 0)
+      return argz;
+    else
+      return 0;
+}
+# undef __argz_next
+# define __argz_next(argz, len, entry) argz_next__ (argz, len, entry)
+#endif	/* !_LIBC && !HAVE___ARGZ_NEXT */
+
+
+/* Return number of bits set in X.  */
+static int pop PARAMS ((int x));
+
+static inline int
+pop (x)
+     int x;
+{
+  /* We assume that no more than 16 bits are used.  */
+  x = ((x & ~0x5555) >> 1) + (x & 0x5555);
+  x = ((x & ~0x3333) >> 2) + (x & 0x3333);
+  x = ((x >> 4) + x) & 0x0f0f;
+  x = ((x >> 8) + x) & 0xff;
+
+  return x;
+}
+
+
+struct loaded_l10nfile *
+_nl_make_l10nflist (l10nfile_list, dirlist, dirlist_len, mask, language,
+		    territory, codeset, normalized_codeset, modifier, special,
+		    sponsor, revision, filename, do_allocate)
+     struct loaded_l10nfile **l10nfile_list;
+     const char *dirlist;
+     size_t dirlist_len;
+     int mask;
+     const char *language;
+     const char *territory;
+     const char *codeset;
+     const char *normalized_codeset;
+     const char *modifier;
+     const char *special;
+     const char *sponsor;
+     const char *revision;
+     const char *filename;
+     int do_allocate;
+{
+  char *abs_filename;
+  struct loaded_l10nfile **lastp;
+  struct loaded_l10nfile *retval;
+  char *cp;
+  size_t dirlist_count;
+  size_t entries;
+  int cnt;
+
+  /* If LANGUAGE contains an absolute directory specification, we ignore
+     DIRLIST.  */
+  if (IS_ABSOLUTE_PATH (language))
+    dirlist_len = 0;
+
+  /* Allocate room for the full file name.  */
+  abs_filename = (char *) malloc (dirlist_len
+				  + strlen (language)
+				  + ((mask & TERRITORY) != 0
+				     ? strlen (territory) + 1 : 0)
+				  + ((mask & XPG_CODESET) != 0
+				     ? strlen (codeset) + 1 : 0)
+				  + ((mask & XPG_NORM_CODESET) != 0
+				     ? strlen (normalized_codeset) + 1 : 0)
+				  + (((mask & XPG_MODIFIER) != 0
+				      || (mask & CEN_AUDIENCE) != 0)
+				     ? strlen (modifier) + 1 : 0)
+				  + ((mask & CEN_SPECIAL) != 0
+				     ? strlen (special) + 1 : 0)
+				  + (((mask & CEN_SPONSOR) != 0
+				      || (mask & CEN_REVISION) != 0)
+				     ? (1 + ((mask & CEN_SPONSOR) != 0
+					     ? strlen (sponsor) : 0)
+					+ ((mask & CEN_REVISION) != 0
+					   ? strlen (revision) + 1 : 0)) : 0)
+				  + 1 + strlen (filename) + 1);
+
+  if (abs_filename == NULL)
+    return NULL;
+
+  /* Construct file name.  */
+  cp = abs_filename;
+  if (dirlist_len > 0)
+    {
+      memcpy (cp, dirlist, dirlist_len);
+      __argz_stringify (cp, dirlist_len, PATH_SEPARATOR);
+      cp += dirlist_len;
+      cp[-1] = '/';
+    }
+
+  cp = stpcpy (cp, language);
+
+  if ((mask & TERRITORY) != 0)
+    {
+      *cp++ = '_';
+      cp = stpcpy (cp, territory);
+    }
+  if ((mask & XPG_CODESET) != 0)
+    {
+      *cp++ = '.';
+      cp = stpcpy (cp, codeset);
+    }
+  if ((mask & XPG_NORM_CODESET) != 0)
+    {
+      *cp++ = '.';
+      cp = stpcpy (cp, normalized_codeset);
+    }
+  if ((mask & (XPG_MODIFIER | CEN_AUDIENCE)) != 0)
+    {
+      /* This component can be part of both syntaxes but has different
+	 leading characters.  For CEN we use `+', else `@'.  */
+      *cp++ = (mask & CEN_AUDIENCE) != 0 ? '+' : '@';
+      cp = stpcpy (cp, modifier);
+    }
+  if ((mask & CEN_SPECIAL) != 0)
+    {
+      *cp++ = '+';
+      cp = stpcpy (cp, special);
+    }
+  if ((mask & (CEN_SPONSOR | CEN_REVISION)) != 0)
+    {
+      *cp++ = ',';
+      if ((mask & CEN_SPONSOR) != 0)
+	cp = stpcpy (cp, sponsor);
+      if ((mask & CEN_REVISION) != 0)
+	{
+	  *cp++ = '_';
+	  cp = stpcpy (cp, revision);
+	}
+    }
+
+  *cp++ = '/';
+  stpcpy (cp, filename);
+
+  /* Look in list of already loaded domains whether it is already
+     available.  */
+  lastp = l10nfile_list;
+  for (retval = *l10nfile_list; retval != NULL; retval = retval->next)
+    if (retval->filename != NULL)
+      {
+	int compare = strcmp (retval->filename, abs_filename);
+	if (compare == 0)
+	  /* We found it!  */
+	  break;
+	if (compare < 0)
+	  {
+	    /* It's not in the list.  */
+	    retval = NULL;
+	    break;
+	  }
+
+	lastp = &retval->next;
+      }
+
+  if (retval != NULL || do_allocate == 0)
+    {
+      free (abs_filename);
+      return retval;
+    }
+
+  dirlist_count = (dirlist_len > 0 ? __argz_count (dirlist, dirlist_len) : 1);
+
+  /* Allocate a new loaded_l10nfile.  */
+  retval =
+    (struct loaded_l10nfile *)
+    malloc (sizeof (*retval)
+	    + (((dirlist_count << pop (mask)) + (dirlist_count > 1 ? 1 : 0))
+	       * sizeof (struct loaded_l10nfile *)));
+  if (retval == NULL)
+    {
+      free (abs_filename);
+      return NULL;
+    }
+
+  retval->filename = abs_filename;
+
+  /* We set retval->data to NULL here; it is filled in later.
+     Setting retval->decided to 1 here means that retval does not
+     correspond to a real file (dirlist_count > 1) or is not worth
+     looking up (if an unnormalized codeset was specified).  */
+  retval->decided = (dirlist_count > 1
+		     || ((mask & XPG_CODESET) != 0
+			 && (mask & XPG_NORM_CODESET) != 0));
+  retval->data = NULL;
+
+  retval->next = *lastp;
+  *lastp = retval;
+
+  entries = 0;
+  /* Recurse to fill the inheritance list of RETVAL.
+     If the DIRLIST is a real list (i.e. DIRLIST_COUNT > 1), the RETVAL
+     entry does not correspond to a real file; retval->filename contains
+     colons.  In this case we loop across all elements of DIRLIST and
+     across all bit patterns dominated by MASK.
+     If the DIRLIST is a single directory or entirely redundant (i.e.
+     DIRLIST_COUNT == 1), we loop across all bit patterns dominated by
+     MASK, excluding MASK itself.
+     In either case, we loop down from MASK to 0.  This has the effect
+     that the extra bits in the locale name are dropped in this order:
+     first the modifier, then the territory, then the codeset, then the
+     normalized_codeset.  */
+  for (cnt = dirlist_count > 1 ? mask : mask - 1; cnt >= 0; --cnt)
+    if ((cnt & ~mask) == 0
+	&& ((cnt & CEN_SPECIFIC) == 0 || (cnt & XPG_SPECIFIC) == 0)
+	&& ((cnt & XPG_CODESET) == 0 || (cnt & XPG_NORM_CODESET) == 0))
+      {
+	if (dirlist_count > 1)
+	  {
+	    /* Iterate over all elements of the DIRLIST.  */
+	    char *dir = NULL;
+
+	    while ((dir = __argz_next ((char *) dirlist, dirlist_len, dir))
+		   != NULL)
+	      retval->successor[entries++]
+		= _nl_make_l10nflist (l10nfile_list, dir, strlen (dir) + 1,
+				      cnt, language, territory, codeset,
+				      normalized_codeset, modifier, special,
+				      sponsor, revision, filename, 1);
+	  }
+	else
+	  retval->successor[entries++]
+	    = _nl_make_l10nflist (l10nfile_list, dirlist, dirlist_len,
+				  cnt, language, territory, codeset,
+				  normalized_codeset, modifier, special,
+				  sponsor, revision, filename, 1);
+      }
+  retval->successor[entries] = NULL;
+
+  return retval;
+}
+
+/* Normalize codeset name.  There is no standard for the codeset
+   names.  Normalization allows the user to use any of the common
+   names.  The return value is dynamically allocated and has to be
+   freed by the caller.  */
+const char *
+_nl_normalize_codeset (codeset, name_len)
+     const char *codeset;
+     size_t name_len;
+{
+  int len = 0;
+  int only_digit = 1;
+  char *retval;
+  char *wp;
+  size_t cnt;
+
+  for (cnt = 0; cnt < name_len; ++cnt)
+    if (isalnum ((unsigned char) codeset[cnt]))
+      {
+	++len;
+
+	if (isalpha ((unsigned char) codeset[cnt]))
+	  only_digit = 0;
+      }
+
+  retval = (char *) malloc ((only_digit ? 3 : 0) + len + 1);
+
+  if (retval != NULL)
+    {
+      if (only_digit)
+	wp = stpcpy (retval, "iso");
+      else
+	wp = retval;
+
+      for (cnt = 0; cnt < name_len; ++cnt)
+	if (isalpha ((unsigned char) codeset[cnt]))
+	  *wp++ = tolower ((unsigned char) codeset[cnt]);
+	else if (isdigit ((unsigned char) codeset[cnt]))
+	  *wp++ = codeset[cnt];
+
+      *wp = '\0';
+    }
+
+  return (const char *) retval;
+}
+
+
+/* @@ begin of epilog @@ */
+
+/* We don't want libintl.a to depend on any other library.  So we
+   avoid the non-standard function stpcpy.  In GNU C Library this
+   function is available, though.  Also allow the symbol HAVE_STPCPY
+   to be defined.  */
+#if !_LIBC && !HAVE_STPCPY
+static char *
+stpcpy (dest, src)
+     char *dest;
+     const char *src;
+{
+  while ((*dest++ = *src++) != '\0')
+    /* Do nothing. */ ;
+  return dest - 1;
+}
+#endif
diff --git a/lib/intl/libgnuintl.h.in b/lib/intl/libgnuintl.h.in
new file mode 100644
index 0000000..14f9cf9
--- /dev/null
+++ b/lib/intl/libgnuintl.h.in
@@ -0,0 +1,311 @@
+/* libgnuintl.h - Message catalogs for internationalization. */
+
+/* Copyright (C) 1995-1997, 2000-2003, 2004-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _LIBINTL_H
+#define _LIBINTL_H	1
+
+#include <locale.h>
+
+/* The LC_MESSAGES locale category is the category used by the functions
+   gettext() and dgettext().  It is specified in POSIX, but not in ANSI C.
+   On systems that don't define it, use an arbitrary value instead.
+   On Solaris, <locale.h> defines __LOCALE_H (or _LOCALE_H in Solaris 2.5)
+   then includes <libintl.h> (i.e. this file!) and then only defines
+   LC_MESSAGES.  To avoid a redefinition warning, don't define LC_MESSAGES
+   in this case.  */
+#if !defined LC_MESSAGES && !(defined __LOCALE_H || (defined _LOCALE_H && defined __sun))
+# define LC_MESSAGES 1729
+#endif
+
+/* We define an additional symbol to signal that we use the GNU
+   implementation of gettext.  */
+#define __USE_GNU_GETTEXT 1
+
+/* Provide information about the supported file formats.  Returns the
+   maximum minor revision number supported for a given major revision.  */
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) \
+  ((major) == 0 ? 1 : -1)
+
+/* Resolve a platform specific conflict on DJGPP.  GNU gettext takes
+   precedence over _conio_gettext.  */
+#ifdef __DJGPP__
+# undef gettext
+#endif
+
+/* Use _INTL_PARAMS, not PARAMS, in order to avoid clashes with identifiers
+   used by programs.  Similarly, test __PROTOTYPES, not PROTOTYPES.  */
+#ifndef _INTL_PARAMS
+# if __STDC__ || defined __GNUC__ || defined __SUNPRO_C || defined __cplusplus || __PROTOTYPES
+#  define _INTL_PARAMS(args) args
+# else
+#  define _INTL_PARAMS(args) ()
+# endif
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/* We redirect the functions to those prefixed with "libintl_".  This is
+   necessary, because some systems define gettext/textdomain/... in the C
+   library (namely, Solaris 2.4 and newer, and GNU libc 2.0 and newer).
+   If we used the unprefixed names, there would be cases where the
+   definition in the C library would override the one in the libintl.so
+   shared library.  Recall that on ELF systems, the symbols are looked
+   up in the following order:
+     1. in the executable,
+     2. in the shared libraries specified on the link command line, in order,
+     3. in the dependencies of the shared libraries specified on the link
+        command line,
+     4. in the dlopen()ed shared libraries, in the order in which they were
+        dlopen()ed.
+   The definition in the C library would override the one in libintl.so if
+   either
+     * -lc is given on the link command line and -lintl isn't, or
+     * -lc is given on the link command line before -lintl, or
+     * libintl.so is a dependency of a dlopen()ed shared library but not
+       linked to the executable at link time.
+   Since Solaris gettext() behaves differently than GNU gettext(), this
+   would be unacceptable.
+
+   The redirection happens by default through macros in C, so that &gettext
+   is independent of the compilation unit, but through inline functions in
+   C++, in order not to interfere with the name mangling of class fields or
+   class methods called 'gettext'.  */
+
+/* The user can define _INTL_REDIRECT_INLINE or _INTL_REDIRECT_MACROS.
+   If he doesn't, we choose the method.  A third possible method is
+   _INTL_REDIRECT_ASM, supported only by GCC.  */
+#if !(defined _INTL_REDIRECT_INLINE || defined _INTL_REDIRECT_MACROS)
+# if __GNUC__ >= 2 && !defined __APPLE_CC__ && (defined __STDC__ || defined __cplusplus)
+#  define _INTL_REDIRECT_ASM
+# else
+#  ifdef __cplusplus
+#   define _INTL_REDIRECT_INLINE
+#  else
+#   define _INTL_REDIRECT_MACROS
+#  endif
+# endif
+#endif
+/* Auxiliary macros.  */
+#ifdef _INTL_REDIRECT_ASM
+# define _INTL_ASM(cname) __asm__ (_INTL_ASMNAME (__USER_LABEL_PREFIX__, #cname))
+# define _INTL_ASMNAME(prefix,cnamestring) _INTL_STRINGIFY (prefix) cnamestring
+# define _INTL_STRINGIFY(prefix) #prefix
+#else
+# define _INTL_ASM(cname)
+#endif
+
+/* Look up MSGID in the current default message catalog for the current
+   LC_MESSAGES locale.  If not found, returns MSGID itself (the default
+   text).  */
+#ifdef _INTL_REDIRECT_INLINE
+extern char *libintl_gettext (const char *__msgid);
+static inline char *gettext (const char *__msgid)
+{
+  return libintl_gettext (__msgid);
+}
+#else
+#ifdef _INTL_REDIRECT_MACROS
+# define gettext libintl_gettext
+#endif
+extern char *gettext _INTL_PARAMS ((const char *__msgid))
+       _INTL_ASM (libintl_gettext);
+#endif
+
+/* Look up MSGID in the DOMAINNAME message catalog for the current
+   LC_MESSAGES locale.  */
+#ifdef _INTL_REDIRECT_INLINE
+extern char *libintl_dgettext (const char *__domainname, const char *__msgid);
+static inline char *dgettext (const char *__domainname, const char *__msgid)
+{
+  return libintl_dgettext (__domainname, __msgid);
+}
+#else
+#ifdef _INTL_REDIRECT_MACROS
+# define dgettext libintl_dgettext
+#endif
+extern char *dgettext _INTL_PARAMS ((const char *__domainname,
+				     const char *__msgid))
+       _INTL_ASM (libintl_dgettext);
+#endif
+
+/* Look up MSGID in the DOMAINNAME message catalog for the current CATEGORY
+   locale.  */
+#ifdef _INTL_REDIRECT_INLINE
+extern char *libintl_dcgettext (const char *__domainname, const char *__msgid,
+				int __category);
+static inline char *dcgettext (const char *__domainname, const char *__msgid,
+			       int __category)
+{
+  return libintl_dcgettext (__domainname, __msgid, __category);
+}
+#else
+#ifdef _INTL_REDIRECT_MACROS
+# define dcgettext libintl_dcgettext
+#endif
+extern char *dcgettext _INTL_PARAMS ((const char *__domainname,
+				      const char *__msgid,
+				      int __category))
+       _INTL_ASM (libintl_dcgettext);
+#endif
+
+
+/* Similar to `gettext' but select the plural form corresponding to the
+   number N.  */
+#ifdef _INTL_REDIRECT_INLINE
+extern char *libintl_ngettext (const char *__msgid1, const char *__msgid2,
+			       unsigned long int __n);
+static inline char *ngettext (const char *__msgid1, const char *__msgid2,
+			      unsigned long int __n)
+{
+  return libintl_ngettext (__msgid1, __msgid2, __n);
+}
+#else
+#ifdef _INTL_REDIRECT_MACROS
+# define ngettext libintl_ngettext
+#endif
+extern char *ngettext _INTL_PARAMS ((const char *__msgid1,
+				     const char *__msgid2,
+				     unsigned long int __n))
+       _INTL_ASM (libintl_ngettext);
+#endif
+
+/* Similar to `dgettext' but select the plural form corresponding to the
+   number N.  */
+#ifdef _INTL_REDIRECT_INLINE
+extern char *libintl_dngettext (const char *__domainname, const char *__msgid1,
+				const char *__msgid2, unsigned long int __n);
+static inline char *dngettext (const char *__domainname, const char *__msgid1,
+			       const char *__msgid2, unsigned long int __n)
+{
+  return libintl_dngettext (__domainname, __msgid1, __msgid2, __n);
+}
+#else
+#ifdef _INTL_REDIRECT_MACROS
+# define dngettext libintl_dngettext
+#endif
+extern char *dngettext _INTL_PARAMS ((const char *__domainname,
+				      const char *__msgid1,
+				      const char *__msgid2,
+				      unsigned long int __n))
+       _INTL_ASM (libintl_dngettext);
+#endif
+
+/* Similar to `dcgettext' but select the plural form corresponding to the
+   number N.  */
+#ifdef _INTL_REDIRECT_INLINE
+extern char *libintl_dcngettext (const char *__domainname,
+				 const char *__msgid1, const char *__msgid2,
+				 unsigned long int __n, int __category);
+static inline char *dcngettext (const char *__domainname,
+				const char *__msgid1, const char *__msgid2,
+				unsigned long int __n, int __category)
+{
+  return libintl_dcngettext (__domainname, __msgid1, __msgid2, __n, __category);
+}
+#else
+#ifdef _INTL_REDIRECT_MACROS
+# define dcngettext libintl_dcngettext
+#endif
+extern char *dcngettext _INTL_PARAMS ((const char *__domainname,
+				       const char *__msgid1,
+				       const char *__msgid2,
+				       unsigned long int __n,
+				       int __category))
+       _INTL_ASM (libintl_dcngettext);
+#endif
+
+
+/* Set the current default message catalog to DOMAINNAME.
+   If DOMAINNAME is null, return the current default.
+   If DOMAINNAME is "", reset to the default of "messages".  */
+#ifdef _INTL_REDIRECT_INLINE
+extern char *libintl_textdomain (const char *__domainname);
+static inline char *textdomain (const char *__domainname)
+{
+  return libintl_textdomain (__domainname);
+}
+#else
+#ifdef _INTL_REDIRECT_MACROS
+# define textdomain libintl_textdomain
+#endif
+extern char *textdomain _INTL_PARAMS ((const char *__domainname))
+       _INTL_ASM (libintl_textdomain);
+#endif
+
+/* Specify that the DOMAINNAME message catalog will be found
+   in DIRNAME rather than in the system locale data base.  */
+#ifdef _INTL_REDIRECT_INLINE
+extern char *libintl_bindtextdomain (const char *__domainname,
+				     const char *__dirname);
+static inline char *bindtextdomain (const char *__domainname,
+				    const char *__dirname)
+{
+  return libintl_bindtextdomain (__domainname, __dirname);
+}
+#else
+#ifdef _INTL_REDIRECT_MACROS
+# define bindtextdomain libintl_bindtextdomain
+#endif
+extern char *bindtextdomain _INTL_PARAMS ((const char *__domainname,
+					   const char *__dirname))
+       _INTL_ASM (libintl_bindtextdomain);
+#endif
+
+/* Specify the character encoding in which the messages from the
+   DOMAINNAME message catalog will be returned.  */
+#ifdef _INTL_REDIRECT_INLINE
+extern char *libintl_bind_textdomain_codeset (const char *__domainname,
+					      const char *__codeset);
+static inline char *bind_textdomain_codeset (const char *__domainname,
+					     const char *__codeset)
+{
+  return libintl_bind_textdomain_codeset (__domainname, __codeset);
+}
+#else
+#ifdef _INTL_REDIRECT_MACROS
+# define bind_textdomain_codeset libintl_bind_textdomain_codeset
+#endif
+extern char *bind_textdomain_codeset _INTL_PARAMS ((const char *__domainname,
+						    const char *__codeset))
+       _INTL_ASM (libintl_bind_textdomain_codeset);
+#endif
+
+
+/* Support for relocatable packages.  */
+
+/* Sets the original and the current installation prefix of the package.
+   Relocation simply replaces a pathname starting with the original prefix
+   by the corresponding pathname with the current prefix instead.  Both
+   prefixes should be directory names without trailing slash (i.e. use ""
+   instead of "/").  */
+#define libintl_set_relocation_prefix libintl_set_relocation_prefix
+extern void
+       libintl_set_relocation_prefix _INTL_PARAMS ((const char *orig_prefix,
+						    const char *curr_prefix));
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* libintl.h */
diff --git a/lib/intl/loadinfo.h b/lib/intl/loadinfo.h
new file mode 100644
index 0000000..d06a277
--- /dev/null
+++ b/lib/intl/loadinfo.h
@@ -0,0 +1,159 @@
+/* loadinfo.c */
+
+/* Copyright (C) 1996-1999, 2000-2002, 2005-2009 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1996.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _LOADINFO_H
+#define _LOADINFO_H	1
+
+/* Declarations of locale dependent catalog lookup functions.
+   Implemented in
+
+     localealias.c    Possibly replace a locale name by another.
+     explodename.c    Split a locale name into its various fields.
+     l10nflist.c      Generate a list of filenames of possible message catalogs.
+     finddomain.c     Find and open the relevant message catalogs.
+
+   The main function _nl_find_domain() in finddomain.c is declared
+   in gettextP.h.
+ */
+
+#ifndef PARAMS
+# if __STDC__ || defined __GNUC__ || defined __SUNPRO_C || defined __cplusplus || __PROTOTYPES
+#  define PARAMS(args) args
+# else
+#  define PARAMS(args) ()
+# endif
+#endif
+
+#ifndef internal_function
+# define internal_function
+#endif
+
+/* Tell the compiler when a conditional or integer expression is
+   almost always true or almost always false.  */
+#ifndef HAVE_BUILTIN_EXPECT
+# define __builtin_expect(expr, val) (expr)
+#endif
+
+/* Separator in PATH like lists of pathnames.  */
+#if defined _WIN32 || defined __WIN32__ || defined __EMX__ || defined __DJGPP__
+  /* Win32, OS/2, DOS */
+# define PATH_SEPARATOR ';'
+#else
+  /* Unix */
+# define PATH_SEPARATOR ':'
+#endif
+
+/* Encoding of locale name parts.  */
+#define CEN_REVISION		1
+#define CEN_SPONSOR		2
+#define CEN_SPECIAL		4
+#define XPG_NORM_CODESET	8
+#define XPG_CODESET		16
+#define TERRITORY		32
+#define CEN_AUDIENCE		64
+#define XPG_MODIFIER		128
+
+#define CEN_SPECIFIC	(CEN_REVISION|CEN_SPONSOR|CEN_SPECIAL|CEN_AUDIENCE)
+#define XPG_SPECIFIC	(XPG_CODESET|XPG_NORM_CODESET|XPG_MODIFIER)
+
+
+struct loaded_l10nfile
+{
+  const char *filename;
+  int decided;
+
+  const void *data;
+
+  struct loaded_l10nfile *next;
+  struct loaded_l10nfile *successor[1];
+};
+
+
+/* Normalize codeset name.  There is no standard for the codeset
+   names.  Normalization allows the user to use any of the common
+   names.  The return value is dynamically allocated and has to be
+   freed by the caller.  */
+extern const char *_nl_normalize_codeset PARAMS ((const char *codeset,
+						  size_t name_len));
+
+/* Lookup a locale dependent file.
+   *L10NFILE_LIST denotes a pool of lookup results of locale dependent
+   files of the same kind, sorted in decreasing order of ->filename.
+   DIRLIST and DIRLIST_LEN are an argz list of directories in which to
+   look, containing at least one directory (i.e. DIRLIST_LEN > 0).
+   MASK, LANGUAGE, TERRITORY, CODESET, NORMALIZED_CODESET, MODIFIER,
+   SPECIAL, SPONSOR, REVISION are the pieces of the locale name, as
+   produced by _nl_explode_name().  FILENAME is the filename suffix.
+   The return value is the lookup result, either found in *L10NFILE_LIST,
+   or - if DO_ALLOCATE is nonzero - freshly allocated, or possibly NULL.
+   If the return value is non-NULL, it is added to *L10NFILE_LIST, and
+   its ->next field denotes the chaining inside *L10NFILE_LIST, and
+   furthermore its ->successor[] field contains a list of other lookup
+   results from which this lookup result inherits.  */
+extern struct loaded_l10nfile *
+_nl_make_l10nflist PARAMS ((struct loaded_l10nfile **l10nfile_list,
+			    const char *dirlist, size_t dirlist_len, int mask,
+			    const char *language, const char *territory,
+			    const char *codeset,
+			    const char *normalized_codeset,
+			    const char *modifier, const char *special,
+			    const char *sponsor, const char *revision,
+			    const char *filename, int do_allocate));
+
+/* Lookup the real locale name for a locale alias NAME, or NULL if
+   NAME is not a locale alias (but possibly a real locale name).
+   The return value is statically allocated and must not be freed.  */
+extern const char *_nl_expand_alias PARAMS ((const char *name));
+
+/* Split a locale name NAME into its pieces: language, modifier,
+   territory, codeset, special, sponsor, revision.
+   NAME gets destructively modified: NUL bytes are inserted here and
+   there.  *LANGUAGE gets assigned NAME.  Each of *MODIFIER, *TERRITORY,
+   *CODESET, *SPECIAL, *SPONSOR, *REVISION gets assigned either a
+   pointer into the old NAME string, or NULL.  *NORMALIZED_CODESET
+   gets assigned the expanded *CODESET, if it is different from *CODESET;
+   this one is dynamically allocated and has to be freed by the caller.
+   The return value is a bitmask, where each bit corresponds to one
+   filled-in value:
+     XPG_MODIFIER, CEN_AUDIENCE  for *MODIFIER,
+     TERRITORY                   for *TERRITORY,
+     XPG_CODESET                 for *CODESET,
+     XPG_NORM_CODESET            for *NORMALIZED_CODESET,
+     CEN_SPECIAL                 for *SPECIAL,
+     CEN_SPONSOR                 for *SPONSOR,
+     CEN_REVISION                for *REVISION.
+ */
+extern int _nl_explode_name PARAMS ((char *name, const char **language,
+				     const char **modifier,
+				     const char **territory,
+				     const char **codeset,
+				     const char **normalized_codeset,
+				     const char **special,
+				     const char **sponsor,
+				     const char **revision));
+
+/* Split a locale name NAME into a leading language part and all the
+   rest.  Return a pointer to the first character after the language,
+   i.e. to the first byte of the rest.  */
+extern char *_nl_find_language PARAMS ((const char *name));
+
+#endif	/* loadinfo.h */
diff --git a/lib/intl/loadmsgcat.c b/lib/intl/loadmsgcat.c
new file mode 100644
index 0000000..adbd7b4
--- /dev/null
+++ b/lib/intl/loadmsgcat.c
@@ -0,0 +1,1336 @@
+/* loadmsgcat.c - Load needed message catalogs. */
+
+/* Copyright (C) 1995-1999, 2000-2003, 2005-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* Tell glibc's <string.h> to provide a prototype for mempcpy().
+   This must come before <config.h> because <config.h> may include
+   <features.h>, and once <features.h> has been included, it's too late.  */
+#ifndef _GNU_SOURCE
+# define _GNU_SOURCE    1
+#endif
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+
+#ifdef __GNUC__
+# undef  alloca
+# define alloca __builtin_alloca
+# define HAVE_ALLOCA 1
+#else
+# ifdef _MSC_VER
+#  include <malloc.h>
+#  define alloca _alloca
+# else
+#  if defined HAVE_ALLOCA_H || defined _LIBC
+#   include <alloca.h>
+#  else
+#   ifdef _AIX
+ #pragma alloca
+#   else
+#    ifndef alloca
+char *alloca ();
+#    endif
+#   endif
+#  endif
+# endif
+#endif
+
+#include <stdlib.h>
+#include <string.h>
+
+#if defined HAVE_UNISTD_H || defined _LIBC
+# include <unistd.h>
+#endif
+
+#ifdef _LIBC
+# include <langinfo.h>
+# include <locale.h>
+#endif
+
+#if (defined HAVE_MMAP && defined HAVE_MUNMAP && !defined DISALLOW_MMAP) \
+    || (defined _LIBC && defined _POSIX_MAPPED_FILES)
+# include <sys/mman.h>
+# undef HAVE_MMAP
+# define HAVE_MMAP	1
+#else
+# undef HAVE_MMAP
+#endif
+
+#if defined HAVE_STDINT_H_WITH_UINTMAX || defined _LIBC
+# include <stdint.h>
+#endif
+#if defined HAVE_INTTYPES_H || defined _LIBC
+# include <inttypes.h>
+#endif
+
+#include "gmo.h"
+#include "gettextP.h"
+#include "hash-string.h"
+#include "plural-exp.h"
+
+#ifdef _LIBC
+# include "../locale/localeinfo.h"
+#endif
+
+/* Provide fallback values for macros that ought to be defined in <inttypes.h>.
+   Note that our fallback values need not be literal strings, because we don't
+   use them with preprocessor string concatenation.  */
+#if !defined PRId8 || PRI_MACROS_BROKEN
+# undef PRId8
+# define PRId8 "d"
+#endif
+#if !defined PRIi8 || PRI_MACROS_BROKEN
+# undef PRIi8
+# define PRIi8 "i"
+#endif
+#if !defined PRIo8 || PRI_MACROS_BROKEN
+# undef PRIo8
+# define PRIo8 "o"
+#endif
+#if !defined PRIu8 || PRI_MACROS_BROKEN
+# undef PRIu8
+# define PRIu8 "u"
+#endif
+#if !defined PRIx8 || PRI_MACROS_BROKEN
+# undef PRIx8
+# define PRIx8 "x"
+#endif
+#if !defined PRIX8 || PRI_MACROS_BROKEN
+# undef PRIX8
+# define PRIX8 "X"
+#endif
+#if !defined PRId16 || PRI_MACROS_BROKEN
+# undef PRId16
+# define PRId16 "d"
+#endif
+#if !defined PRIi16 || PRI_MACROS_BROKEN
+# undef PRIi16
+# define PRIi16 "i"
+#endif
+#if !defined PRIo16 || PRI_MACROS_BROKEN
+# undef PRIo16
+# define PRIo16 "o"
+#endif
+#if !defined PRIu16 || PRI_MACROS_BROKEN
+# undef PRIu16
+# define PRIu16 "u"
+#endif
+#if !defined PRIx16 || PRI_MACROS_BROKEN
+# undef PRIx16
+# define PRIx16 "x"
+#endif
+#if !defined PRIX16 || PRI_MACROS_BROKEN
+# undef PRIX16
+# define PRIX16 "X"
+#endif
+#if !defined PRId32 || PRI_MACROS_BROKEN
+# undef PRId32
+# define PRId32 "d"
+#endif
+#if !defined PRIi32 || PRI_MACROS_BROKEN
+# undef PRIi32
+# define PRIi32 "i"
+#endif
+#if !defined PRIo32 || PRI_MACROS_BROKEN
+# undef PRIo32
+# define PRIo32 "o"
+#endif
+#if !defined PRIu32 || PRI_MACROS_BROKEN
+# undef PRIu32
+# define PRIu32 "u"
+#endif
+#if !defined PRIx32 || PRI_MACROS_BROKEN
+# undef PRIx32
+# define PRIx32 "x"
+#endif
+#if !defined PRIX32 || PRI_MACROS_BROKEN
+# undef PRIX32
+# define PRIX32 "X"
+#endif
+#if !defined PRId64 || PRI_MACROS_BROKEN
+# undef PRId64
+# define PRId64 (sizeof (long) == 8 ? "ld" : "lld")
+#endif
+#if !defined PRIi64 || PRI_MACROS_BROKEN
+# undef PRIi64
+# define PRIi64 (sizeof (long) == 8 ? "li" : "lli")
+#endif
+#if !defined PRIo64 || PRI_MACROS_BROKEN
+# undef PRIo64
+# define PRIo64 (sizeof (long) == 8 ? "lo" : "llo")
+#endif
+#if !defined PRIu64 || PRI_MACROS_BROKEN
+# undef PRIu64
+# define PRIu64 (sizeof (long) == 8 ? "lu" : "llu")
+#endif
+#if !defined PRIx64 || PRI_MACROS_BROKEN
+# undef PRIx64
+# define PRIx64 (sizeof (long) == 8 ? "lx" : "llx")
+#endif
+#if !defined PRIX64 || PRI_MACROS_BROKEN
+# undef PRIX64
+# define PRIX64 (sizeof (long) == 8 ? "lX" : "llX")
+#endif
+#if !defined PRIdLEAST8 || PRI_MACROS_BROKEN
+# undef PRIdLEAST8
+# define PRIdLEAST8 "d"
+#endif
+#if !defined PRIiLEAST8 || PRI_MACROS_BROKEN
+# undef PRIiLEAST8
+# define PRIiLEAST8 "i"
+#endif
+#if !defined PRIoLEAST8 || PRI_MACROS_BROKEN
+# undef PRIoLEAST8
+# define PRIoLEAST8 "o"
+#endif
+#if !defined PRIuLEAST8 || PRI_MACROS_BROKEN
+# undef PRIuLEAST8
+# define PRIuLEAST8 "u"
+#endif
+#if !defined PRIxLEAST8 || PRI_MACROS_BROKEN
+# undef PRIxLEAST8
+# define PRIxLEAST8 "x"
+#endif
+#if !defined PRIXLEAST8 || PRI_MACROS_BROKEN
+# undef PRIXLEAST8
+# define PRIXLEAST8 "X"
+#endif
+#if !defined PRIdLEAST16 || PRI_MACROS_BROKEN
+# undef PRIdLEAST16
+# define PRIdLEAST16 "d"
+#endif
+#if !defined PRIiLEAST16 || PRI_MACROS_BROKEN
+# undef PRIiLEAST16
+# define PRIiLEAST16 "i"
+#endif
+#if !defined PRIoLEAST16 || PRI_MACROS_BROKEN
+# undef PRIoLEAST16
+# define PRIoLEAST16 "o"
+#endif
+#if !defined PRIuLEAST16 || PRI_MACROS_BROKEN
+# undef PRIuLEAST16
+# define PRIuLEAST16 "u"
+#endif
+#if !defined PRIxLEAST16 || PRI_MACROS_BROKEN
+# undef PRIxLEAST16
+# define PRIxLEAST16 "x"
+#endif
+#if !defined PRIXLEAST16 || PRI_MACROS_BROKEN
+# undef PRIXLEAST16
+# define PRIXLEAST16 "X"
+#endif
+#if !defined PRIdLEAST32 || PRI_MACROS_BROKEN
+# undef PRIdLEAST32
+# define PRIdLEAST32 "d"
+#endif
+#if !defined PRIiLEAST32 || PRI_MACROS_BROKEN
+# undef PRIiLEAST32
+# define PRIiLEAST32 "i"
+#endif
+#if !defined PRIoLEAST32 || PRI_MACROS_BROKEN
+# undef PRIoLEAST32
+# define PRIoLEAST32 "o"
+#endif
+#if !defined PRIuLEAST32 || PRI_MACROS_BROKEN
+# undef PRIuLEAST32
+# define PRIuLEAST32 "u"
+#endif
+#if !defined PRIxLEAST32 || PRI_MACROS_BROKEN
+# undef PRIxLEAST32
+# define PRIxLEAST32 "x"
+#endif
+#if !defined PRIXLEAST32 || PRI_MACROS_BROKEN
+# undef PRIXLEAST32
+# define PRIXLEAST32 "X"
+#endif
+#if !defined PRIdLEAST64 || PRI_MACROS_BROKEN
+# undef PRIdLEAST64
+# define PRIdLEAST64 PRId64
+#endif
+#if !defined PRIiLEAST64 || PRI_MACROS_BROKEN
+# undef PRIiLEAST64
+# define PRIiLEAST64 PRIi64
+#endif
+#if !defined PRIoLEAST64 || PRI_MACROS_BROKEN
+# undef PRIoLEAST64
+# define PRIoLEAST64 PRIo64
+#endif
+#if !defined PRIuLEAST64 || PRI_MACROS_BROKEN
+# undef PRIuLEAST64
+# define PRIuLEAST64 PRIu64
+#endif
+#if !defined PRIxLEAST64 || PRI_MACROS_BROKEN
+# undef PRIxLEAST64
+# define PRIxLEAST64 PRIx64
+#endif
+#if !defined PRIXLEAST64 || PRI_MACROS_BROKEN
+# undef PRIXLEAST64
+# define PRIXLEAST64 PRIX64
+#endif
+#if !defined PRIdFAST8 || PRI_MACROS_BROKEN
+# undef PRIdFAST8
+# define PRIdFAST8 "d"
+#endif
+#if !defined PRIiFAST8 || PRI_MACROS_BROKEN
+# undef PRIiFAST8
+# define PRIiFAST8 "i"
+#endif
+#if !defined PRIoFAST8 || PRI_MACROS_BROKEN
+# undef PRIoFAST8
+# define PRIoFAST8 "o"
+#endif
+#if !defined PRIuFAST8 || PRI_MACROS_BROKEN
+# undef PRIuFAST8
+# define PRIuFAST8 "u"
+#endif
+#if !defined PRIxFAST8 || PRI_MACROS_BROKEN
+# undef PRIxFAST8
+# define PRIxFAST8 "x"
+#endif
+#if !defined PRIXFAST8 || PRI_MACROS_BROKEN
+# undef PRIXFAST8
+# define PRIXFAST8 "X"
+#endif
+#if !defined PRIdFAST16 || PRI_MACROS_BROKEN
+# undef PRIdFAST16
+# define PRIdFAST16 "d"
+#endif
+#if !defined PRIiFAST16 || PRI_MACROS_BROKEN
+# undef PRIiFAST16
+# define PRIiFAST16 "i"
+#endif
+#if !defined PRIoFAST16 || PRI_MACROS_BROKEN
+# undef PRIoFAST16
+# define PRIoFAST16 "o"
+#endif
+#if !defined PRIuFAST16 || PRI_MACROS_BROKEN
+# undef PRIuFAST16
+# define PRIuFAST16 "u"
+#endif
+#if !defined PRIxFAST16 || PRI_MACROS_BROKEN
+# undef PRIxFAST16
+# define PRIxFAST16 "x"
+#endif
+#if !defined PRIXFAST16 || PRI_MACROS_BROKEN
+# undef PRIXFAST16
+# define PRIXFAST16 "X"
+#endif
+#if !defined PRIdFAST32 || PRI_MACROS_BROKEN
+# undef PRIdFAST32
+# define PRIdFAST32 "d"
+#endif
+#if !defined PRIiFAST32 || PRI_MACROS_BROKEN
+# undef PRIiFAST32
+# define PRIiFAST32 "i"
+#endif
+#if !defined PRIoFAST32 || PRI_MACROS_BROKEN
+# undef PRIoFAST32
+# define PRIoFAST32 "o"
+#endif
+#if !defined PRIuFAST32 || PRI_MACROS_BROKEN
+# undef PRIuFAST32
+# define PRIuFAST32 "u"
+#endif
+#if !defined PRIxFAST32 || PRI_MACROS_BROKEN
+# undef PRIxFAST32
+# define PRIxFAST32 "x"
+#endif
+#if !defined PRIXFAST32 || PRI_MACROS_BROKEN
+# undef PRIXFAST32
+# define PRIXFAST32 "X"
+#endif
+#if !defined PRIdFAST64 || PRI_MACROS_BROKEN
+# undef PRIdFAST64
+# define PRIdFAST64 PRId64
+#endif
+#if !defined PRIiFAST64 || PRI_MACROS_BROKEN
+# undef PRIiFAST64
+# define PRIiFAST64 PRIi64
+#endif
+#if !defined PRIoFAST64 || PRI_MACROS_BROKEN
+# undef PRIoFAST64
+# define PRIoFAST64 PRIo64
+#endif
+#if !defined PRIuFAST64 || PRI_MACROS_BROKEN
+# undef PRIuFAST64
+# define PRIuFAST64 PRIu64
+#endif
+#if !defined PRIxFAST64 || PRI_MACROS_BROKEN
+# undef PRIxFAST64
+# define PRIxFAST64 PRIx64
+#endif
+#if !defined PRIXFAST64 || PRI_MACROS_BROKEN
+# undef PRIXFAST64
+# define PRIXFAST64 PRIX64
+#endif
+#if !defined PRIdMAX || PRI_MACROS_BROKEN
+# undef PRIdMAX
+# define PRIdMAX (sizeof (uintmax_t) == sizeof (long) ? "ld" : "lld")
+#endif
+#if !defined PRIiMAX || PRI_MACROS_BROKEN
+# undef PRIiMAX
+# define PRIiMAX (sizeof (uintmax_t) == sizeof (long) ? "li" : "lli")
+#endif
+#if !defined PRIoMAX || PRI_MACROS_BROKEN
+# undef PRIoMAX
+# define PRIoMAX (sizeof (uintmax_t) == sizeof (long) ? "lo" : "llo")
+#endif
+#if !defined PRIuMAX || PRI_MACROS_BROKEN
+# undef PRIuMAX
+# define PRIuMAX (sizeof (uintmax_t) == sizeof (long) ? "lu" : "llu")
+#endif
+#if !defined PRIxMAX || PRI_MACROS_BROKEN
+# undef PRIxMAX
+# define PRIxMAX (sizeof (uintmax_t) == sizeof (long) ? "lx" : "llx")
+#endif
+#if !defined PRIXMAX || PRI_MACROS_BROKEN
+# undef PRIXMAX
+# define PRIXMAX (sizeof (uintmax_t) == sizeof (long) ? "lX" : "llX")
+#endif
+#if !defined PRIdPTR || PRI_MACROS_BROKEN
+# undef PRIdPTR
+# define PRIdPTR \
+  (sizeof (void *) == sizeof (long) ? "ld" : \
+   sizeof (void *) == sizeof (int) ? "d" : \
+   "lld")
+#endif
+#if !defined PRIiPTR || PRI_MACROS_BROKEN
+# undef PRIiPTR
+# define PRIiPTR \
+  (sizeof (void *) == sizeof (long) ? "li" : \
+   sizeof (void *) == sizeof (int) ? "i" : \
+   "lli")
+#endif
+#if !defined PRIoPTR || PRI_MACROS_BROKEN
+# undef PRIoPTR
+# define PRIoPTR \
+  (sizeof (void *) == sizeof (long) ? "lo" : \
+   sizeof (void *) == sizeof (int) ? "o" : \
+   "llo")
+#endif
+#if !defined PRIuPTR || PRI_MACROS_BROKEN
+# undef PRIuPTR
+# define PRIuPTR \
+  (sizeof (void *) == sizeof (long) ? "lu" : \
+   sizeof (void *) == sizeof (int) ? "u" : \
+   "llu")
+#endif
+#if !defined PRIxPTR || PRI_MACROS_BROKEN
+# undef PRIxPTR
+# define PRIxPTR \
+  (sizeof (void *) == sizeof (long) ? "lx" : \
+   sizeof (void *) == sizeof (int) ? "x" : \
+   "llx")
+#endif
+#if !defined PRIXPTR || PRI_MACROS_BROKEN
+# undef PRIXPTR
+# define PRIXPTR \
+  (sizeof (void *) == sizeof (long) ? "lX" : \
+   sizeof (void *) == sizeof (int) ? "X" : \
+   "llX")
+#endif
+
+/* @@ end of prolog @@ */
+
+#ifdef _LIBC
+/* Rename the non ISO C functions.  This is required by the standard
+   because some ISO C functions will require linking with this object
+   file and the name space must not be polluted.  */
+# define open   __open
+# define close  __close
+# define read   __read
+# define mmap   __mmap
+# define munmap __munmap
+#endif
+
+/* For those losing systems which don't have `alloca' we have to add
+   some additional code emulating it.  */
+#ifdef HAVE_ALLOCA
+# define freea(p) /* nothing */
+#else
+# define alloca(n) malloc (n)
+# define freea(p) free (p)
+#endif
+
+/* For systems that distinguish between text and binary I/O.
+   O_BINARY is usually declared in <fcntl.h>. */
+#if !defined O_BINARY && defined _O_BINARY
+  /* For MSC-compatible compilers.  */
+# define O_BINARY _O_BINARY
+# define O_TEXT _O_TEXT
+#endif
+#ifdef __BEOS__
+  /* BeOS 5 has O_BINARY and O_TEXT, but they have no effect.  */
+# undef O_BINARY
+# undef O_TEXT
+#endif
+/* On reasonable systems, binary I/O is the default.  */
+#ifndef O_BINARY
+# define O_BINARY 0
+#endif
+
+
+/* Prototypes for local functions.  Needed to ensure compiler checking of
+   function argument counts despite of K&R C function definition syntax.  */
+static const char *get_sysdep_segment_value PARAMS ((const char *name));
+
+
+/* We need a sign, whether a new catalog was loaded, which can be associated
+   with all translations.  This is important if the translations are
+   cached by one of GCC's features.  */
+int _nl_msg_cat_cntr;
+
+
+/* Expand a system dependent string segment.  Return NULL if unsupported.  */
+static const char *
+get_sysdep_segment_value (name)
+     const char *name;
+{
+  /* Test for an ISO C 99 section 7.8.1 format string directive.
+     Syntax:
+     P R I { d | i | o | u | x | X }
+     { { | LEAST | FAST } { 8 | 16 | 32 | 64 } | MAX | PTR }  */
+  /* We don't use a table of 14 times 6 'const char *' strings here, because
+     data relocations cost startup time.  */
+  if (name[0] == 'P' && name[1] == 'R' && name[2] == 'I')
+    {
+      if (name[3] == 'd' || name[3] == 'i' || name[3] == 'o' || name[3] == 'u'
+	  || name[3] == 'x' || name[3] == 'X')
+	{
+	  if (name[4] == '8' && name[5] == '\0')
+	    {
+	      if (name[3] == 'd')
+		return PRId8;
+	      if (name[3] == 'i')
+		return PRIi8;
+	      if (name[3] == 'o')
+		return PRIo8;
+	      if (name[3] == 'u')
+		return PRIu8;
+	      if (name[3] == 'x')
+		return PRIx8;
+	      if (name[3] == 'X')
+		return PRIX8;
+	      abort ();
+	    }
+	  if (name[4] == '1' && name[5] == '6' && name[6] == '\0')
+	    {
+	      if (name[3] == 'd')
+		return PRId16;
+	      if (name[3] == 'i')
+		return PRIi16;
+	      if (name[3] == 'o')
+		return PRIo16;
+	      if (name[3] == 'u')
+		return PRIu16;
+	      if (name[3] == 'x')
+		return PRIx16;
+	      if (name[3] == 'X')
+		return PRIX16;
+	      abort ();
+	    }
+	  if (name[4] == '3' && name[5] == '2' && name[6] == '\0')
+	    {
+	      if (name[3] == 'd')
+		return PRId32;
+	      if (name[3] == 'i')
+		return PRIi32;
+	      if (name[3] == 'o')
+		return PRIo32;
+	      if (name[3] == 'u')
+		return PRIu32;
+	      if (name[3] == 'x')
+		return PRIx32;
+	      if (name[3] == 'X')
+		return PRIX32;
+	      abort ();
+	    }
+	  if (name[4] == '6' && name[5] == '4' && name[6] == '\0')
+	    {
+	      if (name[3] == 'd')
+		return PRId64;
+	      if (name[3] == 'i')
+		return PRIi64;
+	      if (name[3] == 'o')
+		return PRIo64;
+	      if (name[3] == 'u')
+		return PRIu64;
+	      if (name[3] == 'x')
+		return PRIx64;
+	      if (name[3] == 'X')
+		return PRIX64;
+	      abort ();
+	    }
+	  if (name[4] == 'L' && name[5] == 'E' && name[6] == 'A'
+	      && name[7] == 'S' && name[8] == 'T')
+	    {
+	      if (name[9] == '8' && name[10] == '\0')
+		{
+		  if (name[3] == 'd')
+		    return PRIdLEAST8;
+		  if (name[3] == 'i')
+		    return PRIiLEAST8;
+		  if (name[3] == 'o')
+		    return PRIoLEAST8;
+		  if (name[3] == 'u')
+		    return PRIuLEAST8;
+		  if (name[3] == 'x')
+		    return PRIxLEAST8;
+		  if (name[3] == 'X')
+		    return PRIXLEAST8;
+		  abort ();
+		}
+	      if (name[9] == '1' && name[10] == '6' && name[11] == '\0')
+		{
+		  if (name[3] == 'd')
+		    return PRIdLEAST16;
+		  if (name[3] == 'i')
+		    return PRIiLEAST16;
+		  if (name[3] == 'o')
+		    return PRIoLEAST16;
+		  if (name[3] == 'u')
+		    return PRIuLEAST16;
+		  if (name[3] == 'x')
+		    return PRIxLEAST16;
+		  if (name[3] == 'X')
+		    return PRIXLEAST16;
+		  abort ();
+		}
+	      if (name[9] == '3' && name[10] == '2' && name[11] == '\0')
+		{
+		  if (name[3] == 'd')
+		    return PRIdLEAST32;
+		  if (name[3] == 'i')
+		    return PRIiLEAST32;
+		  if (name[3] == 'o')
+		    return PRIoLEAST32;
+		  if (name[3] == 'u')
+		    return PRIuLEAST32;
+		  if (name[3] == 'x')
+		    return PRIxLEAST32;
+		  if (name[3] == 'X')
+		    return PRIXLEAST32;
+		  abort ();
+		}
+	      if (name[9] == '6' && name[10] == '4' && name[11] == '\0')
+		{
+		  if (name[3] == 'd')
+		    return PRIdLEAST64;
+		  if (name[3] == 'i')
+		    return PRIiLEAST64;
+		  if (name[3] == 'o')
+		    return PRIoLEAST64;
+		  if (name[3] == 'u')
+		    return PRIuLEAST64;
+		  if (name[3] == 'x')
+		    return PRIxLEAST64;
+		  if (name[3] == 'X')
+		    return PRIXLEAST64;
+		  abort ();
+		}
+	    }
+	  if (name[4] == 'F' && name[5] == 'A' && name[6] == 'S'
+	      && name[7] == 'T')
+	    {
+	      if (name[8] == '8' && name[9] == '\0')
+		{
+		  if (name[3] == 'd')
+		    return PRIdFAST8;
+		  if (name[3] == 'i')
+		    return PRIiFAST8;
+		  if (name[3] == 'o')
+		    return PRIoFAST8;
+		  if (name[3] == 'u')
+		    return PRIuFAST8;
+		  if (name[3] == 'x')
+		    return PRIxFAST8;
+		  if (name[3] == 'X')
+		    return PRIXFAST8;
+		  abort ();
+		}
+	      if (name[8] == '1' && name[9] == '6' && name[10] == '\0')
+		{
+		  if (name[3] == 'd')
+		    return PRIdFAST16;
+		  if (name[3] == 'i')
+		    return PRIiFAST16;
+		  if (name[3] == 'o')
+		    return PRIoFAST16;
+		  if (name[3] == 'u')
+		    return PRIuFAST16;
+		  if (name[3] == 'x')
+		    return PRIxFAST16;
+		  if (name[3] == 'X')
+		    return PRIXFAST16;
+		  abort ();
+		}
+	      if (name[8] == '3' && name[9] == '2' && name[10] == '\0')
+		{
+		  if (name[3] == 'd')
+		    return PRIdFAST32;
+		  if (name[3] == 'i')
+		    return PRIiFAST32;
+		  if (name[3] == 'o')
+		    return PRIoFAST32;
+		  if (name[3] == 'u')
+		    return PRIuFAST32;
+		  if (name[3] == 'x')
+		    return PRIxFAST32;
+		  if (name[3] == 'X')
+		    return PRIXFAST32;
+		  abort ();
+		}
+	      if (name[8] == '6' && name[9] == '4' && name[10] == '\0')
+		{
+		  if (name[3] == 'd')
+		    return PRIdFAST64;
+		  if (name[3] == 'i')
+		    return PRIiFAST64;
+		  if (name[3] == 'o')
+		    return PRIoFAST64;
+		  if (name[3] == 'u')
+		    return PRIuFAST64;
+		  if (name[3] == 'x')
+		    return PRIxFAST64;
+		  if (name[3] == 'X')
+		    return PRIXFAST64;
+		  abort ();
+		}
+	    }
+	  if (name[4] == 'M' && name[5] == 'A' && name[6] == 'X'
+	      && name[7] == '\0')
+	    {
+	      if (name[3] == 'd')
+		return PRIdMAX;
+	      if (name[3] == 'i')
+		return PRIiMAX;
+	      if (name[3] == 'o')
+		return PRIoMAX;
+	      if (name[3] == 'u')
+		return PRIuMAX;
+	      if (name[3] == 'x')
+		return PRIxMAX;
+	      if (name[3] == 'X')
+		return PRIXMAX;
+	      abort ();
+	    }
+	  if (name[4] == 'P' && name[5] == 'T' && name[6] == 'R'
+	      && name[7] == '\0')
+	    {
+	      if (name[3] == 'd')
+		return PRIdPTR;
+	      if (name[3] == 'i')
+		return PRIiPTR;
+	      if (name[3] == 'o')
+		return PRIoPTR;
+	      if (name[3] == 'u')
+		return PRIuPTR;
+	      if (name[3] == 'x')
+		return PRIxPTR;
+	      if (name[3] == 'X')
+		return PRIXPTR;
+	      abort ();
+	    }
+	}
+    }
+  /* Other system dependent strings are not valid.  */
+  return NULL;
+}
+
+/* Initialize the codeset dependent parts of an opened message catalog.
+   Return the header entry.  */
+const char *
+internal_function
+_nl_init_domain_conv (domain_file, domain, domainbinding)
+     struct loaded_l10nfile *domain_file;
+     struct loaded_domain *domain;
+     struct binding *domainbinding;
+{
+  /* Find out about the character set the file is encoded with.
+     This can be found (in textual form) in the entry "".  If this
+     entry does not exist or if this does not contain the `charset='
+     information, we will assume the charset matches the one the
+     current locale and we don't have to perform any conversion.  */
+  char *nullentry;
+  size_t nullentrylen;
+
+  /* Preinitialize fields, to avoid recursion during _nl_find_msg.  */
+  domain->codeset_cntr =
+    (domainbinding != NULL ? domainbinding->codeset_cntr : 0);
+#ifdef _LIBC
+  domain->conv = (__gconv_t) -1;
+#else
+# if HAVE_ICONV
+  domain->conv = (iconv_t) -1;
+# endif
+#endif
+  domain->conv_tab = NULL;
+
+  /* Get the header entry.  */
+  nullentry = _nl_find_msg (domain_file, domainbinding, "", &nullentrylen);
+
+  if (nullentry != NULL)
+    {
+#if defined _LIBC || HAVE_ICONV
+      const char *charsetstr;
+
+      charsetstr = strstr (nullentry, "charset=");
+      if (charsetstr != NULL)
+	{
+	  size_t len;
+	  char *charset;
+	  const char *outcharset;
+
+	  charsetstr += strlen ("charset=");
+	  len = strcspn (charsetstr, " \t\n");
+
+	  charset = (char *) alloca (len + 1);
+# if defined _LIBC || HAVE_MEMPCPY
+	  *((char *) mempcpy (charset, charsetstr, len)) = '\0';
+# else
+	  memcpy (charset, charsetstr, len);
+	  charset[len] = '\0';
+# endif
+
+	  /* The output charset should normally be determined by the
+	     locale.  But sometimes the locale is not used or not correctly
+	     set up, so we provide a possibility for the user to override
+	     this.  Moreover, the value specified through
+	     bind_textdomain_codeset overrides both.  */
+	  if (domainbinding != NULL && domainbinding->codeset != NULL)
+	    outcharset = domainbinding->codeset;
+	  else
+	    {
+	      outcharset = getenv ("OUTPUT_CHARSET");
+	      if (outcharset == NULL || outcharset[0] == '\0')
+		{
+# ifdef _LIBC
+		  outcharset = _NL_CURRENT (LC_CTYPE, CODESET);
+# else
+#  if HAVE_ICONV
+		  extern const char *locale_charset PARAMS ((void));
+		  outcharset = locale_charset ();
+#  endif
+# endif
+		}
+	    }
+
+# ifdef _LIBC
+	  /* We always want to use transliteration.  */
+	  outcharset = norm_add_slashes (outcharset, "TRANSLIT");
+	  charset = norm_add_slashes (charset, NULL);
+	  if (__gconv_open (outcharset, charset, &domain->conv,
+			    GCONV_AVOID_NOCONV)
+	      != __GCONV_OK)
+	    domain->conv = (__gconv_t) -1;
+# else
+#  if HAVE_ICONV
+	  /* When using GNU libc >= 2.2 or GNU libiconv >= 1.5,
+	     we want to use transliteration.  */
+#   if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 2) || __GLIBC__ > 2 \
+       || _LIBICONV_VERSION >= 0x0105
+	  if (strchr (outcharset, '/') == NULL)
+	    {
+	      char *tmp;
+
+	      len = strlen (outcharset);
+	      tmp = (char *) alloca (len + 10 + 1);
+	      memcpy (tmp, outcharset, len);
+	      memcpy (tmp + len, "//TRANSLIT", 10 + 1);
+	      outcharset = tmp;
+
+	      domain->conv = iconv_open (outcharset, charset);
+
+	      freea (outcharset);
+	    }
+	  else
+#   endif
+	    domain->conv = iconv_open (outcharset, charset);
+#  endif
+# endif
+
+	  freea (charset);
+	}
+#endif /* _LIBC || HAVE_ICONV */
+    }
+
+  return nullentry;
+}
+
+/* Frees the codeset dependent parts of an opened message catalog.  */
+void
+internal_function
+_nl_free_domain_conv (domain)
+     struct loaded_domain *domain;
+{
+  if (domain->conv_tab != NULL && domain->conv_tab != (char **) -1)
+    free (domain->conv_tab);
+
+#ifdef _LIBC
+  if (domain->conv != (__gconv_t) -1)
+    __gconv_close (domain->conv);
+#else
+# if HAVE_ICONV
+  if (domain->conv != (iconv_t) -1)
+    iconv_close (domain->conv);
+# endif
+#endif
+}
+
+/* Load the message catalogs specified by FILENAME.  If it is no valid
+   message catalog do nothing.  */
+void
+internal_function
+_nl_load_domain (domain_file, domainbinding)
+     struct loaded_l10nfile *domain_file;
+     struct binding *domainbinding;
+{
+  int fd;
+  size_t size;
+#ifdef _LIBC
+  struct stat64 st;
+#else
+  struct stat st;
+#endif
+  struct mo_file_header *data = (struct mo_file_header *) -1;
+  int use_mmap = 0;
+  struct loaded_domain *domain;
+  int revision;
+  const char *nullentry;
+
+  domain_file->decided = 1;
+  domain_file->data = NULL;
+
+  /* Note that it would be useless to store domainbinding in domain_file
+     because domainbinding might be == NULL now but != NULL later (after
+     a call to bind_textdomain_codeset).  */
+
+  /* If the record does not represent a valid locale the FILENAME
+     might be NULL.  This can happen when according to the given
+     specification the locale file name is different for XPG and CEN
+     syntax.  */
+  if (domain_file->filename == NULL)
+    return;
+
+  /* Try to open the addressed file.  */
+  fd = open (domain_file->filename, O_RDONLY | O_BINARY);
+  if (fd == -1)
+    return;
+
+  /* We must know about the size of the file.  */
+  if (
+#ifdef _LIBC
+      __builtin_expect (fstat64 (fd, &st) != 0, 0)
+#else
+      __builtin_expect (fstat (fd, &st) != 0, 0)
+#endif
+      || __builtin_expect ((size = (size_t) st.st_size) != st.st_size, 0)
+      || __builtin_expect (size < sizeof (struct mo_file_header), 0))
+    {
+      /* Something went wrong.  */
+      close (fd);
+      return;
+    }
+
+#ifdef HAVE_MMAP
+  /* Now we are ready to load the file.  If mmap() is available we try
+     this first.  If not available or it failed we try to load it.  */
+  data = (struct mo_file_header *) mmap (NULL, size, PROT_READ,
+					 MAP_PRIVATE, fd, 0);
+
+  if (__builtin_expect (data != (struct mo_file_header *) -1, 1))
+    {
+      /* mmap() call was successful.  */
+      close (fd);
+      use_mmap = 1;
+    }
+#endif
+
+  /* If the data is not yet available (i.e. mmap'ed) we try to load
+     it manually.  */
+  if (data == (struct mo_file_header *) -1)
+    {
+      size_t to_read;
+      char *read_ptr;
+
+      data = (struct mo_file_header *) malloc (size);
+      if (data == NULL)
+	{
+	  if (use_mmap == 0)
+	    close (fd);
+	  return;
+	}
+
+      to_read = size;
+      read_ptr = (char *) data;
+      do
+	{
+	  long int nb = (long int) read (fd, read_ptr, to_read);
+	  if (nb <= 0)
+	    {
+#ifdef EINTR
+	      if (nb == -1 && errno == EINTR)
+		continue;
+#endif
+	      close (fd);
+	      return;
+	    }
+	  read_ptr += nb;
+	  to_read -= nb;
+	}
+      while (to_read > 0);
+
+      close (fd);
+    }
+
+  /* Using the magic number we can test whether it really is a message
+     catalog file.  */
+  if (__builtin_expect (data->magic != _MAGIC && data->magic != _MAGIC_SWAPPED,
+			0))
+    {
+      /* The magic number is wrong: not a message catalog file.  */
+#ifdef HAVE_MMAP
+      if (use_mmap)
+	munmap ((caddr_t) data, size);
+      else
+#endif
+	free (data);
+      return;
+    }
+
+  domain = (struct loaded_domain *) malloc (sizeof (struct loaded_domain));
+  if (domain == NULL)
+    {
+#ifdef HAVE_MMAP
+      if (use_mmap)
+	munmap ((caddr_t) data, size);
+      else
+#endif
+	free (data);
+      return;
+    }
+  domain_file->data = domain;
+
+  domain->data = (char *) data;
+  domain->use_mmap = use_mmap;
+  domain->mmap_size = size;
+  domain->must_swap = data->magic != _MAGIC;
+  domain->malloced = NULL;
+
+  /* Fill in the information about the available tables.  */
+  revision = W (domain->must_swap, data->revision);
+  /* We support only the major revision 0.  */
+  switch (revision >> 16)
+    {
+    case 0:
+      domain->nstrings = W (domain->must_swap, data->nstrings);
+      domain->orig_tab = (const struct string_desc *)
+	((char *) data + W (domain->must_swap, data->orig_tab_offset));
+      domain->trans_tab = (const struct string_desc *)
+	((char *) data + W (domain->must_swap, data->trans_tab_offset));
+      domain->hash_size = W (domain->must_swap, data->hash_tab_size);
+      domain->hash_tab =
+	(domain->hash_size > 2
+	 ? (const nls_uint32 *)
+	   ((char *) data + W (domain->must_swap, data->hash_tab_offset))
+	 : NULL);
+      domain->must_swap_hash_tab = domain->must_swap;
+
+      /* Now dispatch on the minor revision.  */
+      switch (revision & 0xffff)
+	{
+	case 0:
+	  domain->n_sysdep_strings = 0;
+	  domain->orig_sysdep_tab = NULL;
+	  domain->trans_sysdep_tab = NULL;
+	  break;
+	case 1:
+	default:
+	  {
+	    nls_uint32 n_sysdep_strings;
+
+	    if (domain->hash_tab == NULL)
+	      /* This is invalid.  These minor revisions need a hash table.  */
+	      goto invalid;
+
+	    n_sysdep_strings =
+	      W (domain->must_swap, data->n_sysdep_strings);
+	    if (n_sysdep_strings > 0)
+	      {
+		nls_uint32 n_sysdep_segments;
+		const struct sysdep_segment *sysdep_segments;
+		const char **sysdep_segment_values;
+		const nls_uint32 *orig_sysdep_tab;
+		const nls_uint32 *trans_sysdep_tab;
+		size_t memneed;
+		char *mem;
+		struct sysdep_string_desc *inmem_orig_sysdep_tab;
+		struct sysdep_string_desc *inmem_trans_sysdep_tab;
+		nls_uint32 *inmem_hash_tab;
+		unsigned int i;
+
+		/* Get the values of the system dependent segments.  */
+		n_sysdep_segments =
+		  W (domain->must_swap, data->n_sysdep_segments);
+		sysdep_segments = (const struct sysdep_segment *)
+		  ((char *) data
+		   + W (domain->must_swap, data->sysdep_segments_offset));
+		sysdep_segment_values =
+		  alloca (n_sysdep_segments * sizeof (const char *));
+		for (i = 0; i < n_sysdep_segments; i++)
+		  {
+		    const char *name =
+		      (char *) data
+		      + W (domain->must_swap, sysdep_segments[i].offset);
+		    nls_uint32 namelen =
+		      W (domain->must_swap, sysdep_segments[i].length);
+
+		    if (!(namelen > 0 && name[namelen - 1] == '\0'))
+		      {
+			freea (sysdep_segment_values);
+			goto invalid;
+		      }
+
+		    sysdep_segment_values[i] = get_sysdep_segment_value (name);
+		  }
+
+		orig_sysdep_tab = (const nls_uint32 *)
+		  ((char *) data
+		   + W (domain->must_swap, data->orig_sysdep_tab_offset));
+		trans_sysdep_tab = (const nls_uint32 *)
+		  ((char *) data
+		   + W (domain->must_swap, data->trans_sysdep_tab_offset));
+
+		/* Compute the amount of additional memory needed for the
+		   system dependent strings and the augmented hash table.  */
+		memneed = 2 * n_sysdep_strings
+			  * sizeof (struct sysdep_string_desc)
+			  + domain->hash_size * sizeof (nls_uint32);
+		for (i = 0; i < 2 * n_sysdep_strings; i++)
+		  {
+		    const struct sysdep_string *sysdep_string =
+		      (const struct sysdep_string *)
+		      ((char *) data
+		       + W (domain->must_swap,
+			    i < n_sysdep_strings
+			    ? orig_sysdep_tab[i]
+			    : trans_sysdep_tab[i - n_sysdep_strings]));
+		    size_t need = 0;
+		    const struct segment_pair *p = sysdep_string->segments;
+
+		    if (W (domain->must_swap, p->sysdepref) != SEGMENTS_END)
+		      for (p = sysdep_string->segments;; p++)
+			{
+			  nls_uint32 sysdepref;
+
+			  need += W (domain->must_swap, p->segsize);
+
+			  sysdepref = W (domain->must_swap, p->sysdepref);
+			  if (sysdepref == SEGMENTS_END)
+			    break;
+
+			  if (sysdepref >= n_sysdep_segments)
+			    {
+			      /* Invalid.  */
+			      freea (sysdep_segment_values);
+			      goto invalid;
+			    }
+
+			  need += strlen (sysdep_segment_values[sysdepref]);
+			}
+
+		    memneed += need;
+		  }
+
+		/* Allocate additional memory.  */
+		mem = (char *) malloc (memneed);
+		if (mem == NULL)
+		  goto invalid;
+
+		domain->malloced = mem;
+		inmem_orig_sysdep_tab = (struct sysdep_string_desc *) mem;
+		mem += n_sysdep_strings * sizeof (struct sysdep_string_desc);
+		inmem_trans_sysdep_tab = (struct sysdep_string_desc *) mem;
+		mem += n_sysdep_strings * sizeof (struct sysdep_string_desc);
+		inmem_hash_tab = (nls_uint32 *) mem;
+		mem += domain->hash_size * sizeof (nls_uint32);
+
+		/* Compute the system dependent strings.  */
+		for (i = 0; i < 2 * n_sysdep_strings; i++)
+		  {
+		    const struct sysdep_string *sysdep_string =
+		      (const struct sysdep_string *)
+		      ((char *) data
+		       + W (domain->must_swap,
+			    i < n_sysdep_strings
+			    ? orig_sysdep_tab[i]
+			    : trans_sysdep_tab[i - n_sysdep_strings]));
+		    const char *static_segments =
+		      (char *) data
+		      + W (domain->must_swap, sysdep_string->offset);
+		    const struct segment_pair *p = sysdep_string->segments;
+
+		    /* Concatenate the segments, and fill
+		       inmem_orig_sysdep_tab[i] (for i < n_sysdep_strings) and
+		       inmem_trans_sysdep_tab[i-n_sysdep_strings] (for
+		       i >= n_sysdep_strings).  */
+
+		    if (W (domain->must_swap, p->sysdepref) == SEGMENTS_END)
+		      {
+			/* Only one static segment.  */
+			inmem_orig_sysdep_tab[i].length =
+			  W (domain->must_swap, p->segsize);
+			inmem_orig_sysdep_tab[i].pointer = static_segments;
+		      }
+		    else
+		      {
+			inmem_orig_sysdep_tab[i].pointer = mem;
+
+			for (p = sysdep_string->segments;; p++)
+			  {
+			    nls_uint32 segsize =
+			      W (domain->must_swap, p->segsize);
+			    nls_uint32 sysdepref =
+			      W (domain->must_swap, p->sysdepref);
+			    size_t n;
+
+			    if (segsize > 0)
+			      {
+				memcpy (mem, static_segments, segsize);
+				mem += segsize;
+				static_segments += segsize;
+			      }
+
+			    if (sysdepref == SEGMENTS_END)
+			      break;
+
+			    n = strlen (sysdep_segment_values[sysdepref]);
+			    memcpy (mem, sysdep_segment_values[sysdepref], n);
+			    mem += n;
+			  }
+
+			inmem_orig_sysdep_tab[i].length =
+			  mem - inmem_orig_sysdep_tab[i].pointer;
+		      }
+		  }
+
+		/* Compute the augmented hash table.  */
+		for (i = 0; i < domain->hash_size; i++)
+		  inmem_hash_tab[i] =
+		    W (domain->must_swap_hash_tab, domain->hash_tab[i]);
+		for (i = 0; i < n_sysdep_strings; i++)
+		  {
+		    const char *msgid = inmem_orig_sysdep_tab[i].pointer;
+		    nls_uint32 hash_val = hash_string (msgid);
+		    nls_uint32 idx = hash_val % domain->hash_size;
+		    nls_uint32 incr = 1 + (hash_val % (domain->hash_size - 2));
+
+		    for (;;)
+		      {
+			if (inmem_hash_tab[idx] == 0)
+			  {
+			    /* Hash table entry is empty.  Use it.  */
+			    inmem_hash_tab[idx] = 1 + domain->nstrings + i;
+			    break;
+			  }
+
+			if (idx >= domain->hash_size - incr)
+			  idx -= domain->hash_size - incr;
+			else
+			  idx += incr;
+		      }
+		  }
+
+		freea (sysdep_segment_values);
+
+		domain->n_sysdep_strings = n_sysdep_strings;
+		domain->orig_sysdep_tab = inmem_orig_sysdep_tab;
+		domain->trans_sysdep_tab = inmem_trans_sysdep_tab;
+
+		domain->hash_tab = inmem_hash_tab;
+		domain->must_swap_hash_tab = 0;
+	      }
+	    else
+	      {
+		domain->n_sysdep_strings = 0;
+		domain->orig_sysdep_tab = NULL;
+		domain->trans_sysdep_tab = NULL;
+	      }
+	  }
+	  break;
+	}
+      break;
+    default:
+      /* This is an invalid revision.  */
+    invalid:
+      /* This is an invalid .mo file.  */
+      if (domain->malloced)
+	free (domain->malloced);
+#ifdef HAVE_MMAP
+      if (use_mmap)
+	munmap ((caddr_t) data, size);
+      else
+#endif
+	free (data);
+      free (domain);
+      domain_file->data = NULL;
+      return;
+    }
+
+  /* Now initialize the character set converter from the character set
+     the file is encoded with (found in the header entry) to the domain's
+     specified character set or the locale's character set.  */
+  nullentry = _nl_init_domain_conv (domain_file, domain, domainbinding);
+
+  /* Also look for a plural specification.  */
+  EXTRACT_PLURAL_EXPRESSION (nullentry, &domain->plural, &domain->nplurals);
+}
+
+
+#ifdef _LIBC
+void
+internal_function
+_nl_unload_domain (domain)
+     struct loaded_domain *domain;
+{
+  if (domain->plural != &__gettext_germanic_plural)
+    __gettext_free_exp (domain->plural);
+
+  _nl_free_domain_conv (domain);
+
+  if (domain->malloced)
+    free (domain->malloced);
+
+# ifdef _POSIX_MAPPED_FILES
+  if (domain->use_mmap)
+    munmap ((caddr_t) domain->data, domain->mmap_size);
+  else
+# endif	/* _POSIX_MAPPED_FILES */
+    free ((void *) domain->data);
+
+  free (domain);
+}
+#endif
diff --git a/lib/intl/localcharset.c b/lib/intl/localcharset.c
new file mode 100644
index 0000000..6983d0b
--- /dev/null
+++ b/lib/intl/localcharset.c
@@ -0,0 +1,399 @@
+/* localcharset.c - Determine a canonical name for the current locale's character encoding. */
+
+/* Copyright (C) 2000-2003, 2005-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* Written by Bruno Haible <bruno@clisp.org>.  */
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+/* Specification.  */
+#include "localcharset.h"
+
+#if HAVE_STDDEF_H
+# include <stddef.h>
+#endif
+
+#include <stdio.h>
+#if HAVE_STRING_H
+# include <string.h>
+#else
+# include <strings.h>
+#endif
+#if HAVE_STDLIB_H
+# include <stdlib.h>
+#endif
+
+#if defined _WIN32 || defined __WIN32__
+# undef WIN32   /* avoid warning on mingw32 */
+# define WIN32
+#endif
+
+#if defined __EMX__
+/* Assume EMX program runs on OS/2, even if compiled under DOS.  */
+# define OS2
+#endif
+
+#if !defined WIN32
+# if HAVE_LANGINFO_CODESET
+#  include <langinfo.h>
+# else
+#  if HAVE_SETLOCALE
+#   include <locale.h>
+#  endif
+# endif
+#elif defined WIN32
+# define WIN32_LEAN_AND_MEAN
+# include <windows.h>
+#endif
+#if defined OS2
+# define INCL_DOS
+# include <os2.h>
+#endif
+
+#if ENABLE_RELOCATABLE
+# include "relocatable.h"
+#else
+# define relocate(pathname) (pathname)
+#endif
+
+#if defined _WIN32 || defined __WIN32__ || defined __EMX__ || defined __DJGPP__
+  /* Win32, OS/2, DOS */
+# define ISSLASH(C) ((C) == '/' || (C) == '\\')
+#endif
+
+#ifndef DIRECTORY_SEPARATOR
+# define DIRECTORY_SEPARATOR '/'
+#endif
+
+#ifndef ISSLASH
+# define ISSLASH(C) ((C) == DIRECTORY_SEPARATOR)
+#endif
+
+#ifdef HAVE_GETC_UNLOCKED
+# undef getc
+# define getc getc_unlocked
+#endif
+
+/* The following static variable is declared 'volatile' to avoid a
+   possible multithread problem in the function get_charset_aliases. If we
+   are running in a threaded environment, and if two threads initialize
+   'charset_aliases' simultaneously, both will produce the same value,
+   and everything will be ok if the two assignments to 'charset_aliases'
+   are atomic. But I don't know what will happen if the two assignments mix.  */
+#if __STDC__ != 1
+# define volatile /* empty */
+#endif
+/* Pointer to the contents of the charset.alias file, if it has already been
+   read, else NULL.  Its format is:
+   ALIAS_1 '\0' CANONICAL_1 '\0' ... ALIAS_n '\0' CANONICAL_n '\0' '\0'  */
+static const char * volatile charset_aliases;
+
+/* Return a pointer to the contents of the charset.alias file.  */
+static const char *
+get_charset_aliases ()
+{
+  const char *cp;
+
+  cp = charset_aliases;
+  if (cp == NULL)
+    {
+#if !(defined VMS || defined WIN32)
+      FILE *fp;
+      const char *dir = relocate (LIBDIR);
+      const char *base = "charset.alias";
+      char *file_name;
+
+      /* Concatenate dir and base into freshly allocated file_name.  */
+      {
+	size_t dir_len = strlen (dir);
+	size_t base_len = strlen (base);
+	int add_slash = (dir_len > 0 && !ISSLASH (dir[dir_len - 1]));
+	file_name = (char *) malloc (dir_len + add_slash + base_len + 1);
+	if (file_name != NULL)
+	  {
+	    memcpy (file_name, dir, dir_len);
+	    if (add_slash)
+	      file_name[dir_len] = DIRECTORY_SEPARATOR;
+	    memcpy (file_name + dir_len + add_slash, base, base_len + 1);
+	  }
+      }
+
+      if (file_name == NULL || (fp = fopen (file_name, "r")) == NULL)
+	/* Out of memory or file not found, treat it as empty.  */
+	cp = "";
+      else
+	{
+	  /* Parse the file's contents.  */
+	  int c;
+	  char buf1[50+1];
+	  char buf2[50+1];
+	  char *res_ptr = NULL;
+	  size_t res_size = 0;
+	  size_t l1, l2;
+
+	  for (;;)
+	    {
+	      c = getc (fp);
+	      if (c == EOF)
+		break;
+	      if (c == '\n' || c == ' ' || c == '\t')
+		continue;
+	      if (c == '#')
+		{
+		  /* Skip comment, to end of line.  */
+		  do
+		    c = getc (fp);
+		  while (!(c == EOF || c == '\n'));
+		  if (c == EOF)
+		    break;
+		  continue;
+		}
+	      ungetc (c, fp);
+	      if (fscanf (fp, "%50s %50s", buf1, buf2) < 2)
+		break;
+	      l1 = strlen (buf1);
+	      l2 = strlen (buf2);
+	      if (res_size == 0)
+		{
+		  res_size = l1 + 1 + l2 + 1;
+		  res_ptr = (char *) malloc (res_size + 1);
+		}
+	      else
+		{
+		  res_size += l1 + 1 + l2 + 1;
+		  res_ptr = (char *) realloc (res_ptr, res_size + 1);
+		}
+	      if (res_ptr == NULL)
+		{
+		  /* Out of memory. */
+		  res_size = 0;
+		  break;
+		}
+	      strcpy (res_ptr + res_size - (l2 + 1) - (l1 + 1), buf1);
+	      strcpy (res_ptr + res_size - (l2 + 1), buf2);
+	    }
+	  fclose (fp);
+	  if (res_size == 0)
+	    cp = "";
+	  else
+	    {
+	      *(res_ptr + res_size) = '\0';
+	      cp = res_ptr;
+	    }
+	}
+
+      if (file_name != NULL)
+	free (file_name);
+
+#else
+
+# if defined VMS
+      /* To avoid the troubles of an extra file charset.alias_vms in the
+	 sources of many GNU packages, simply inline the aliases here.  */
+      /* The list of encodings is taken from the OpenVMS 7.3-1 documentation
+	 "Compaq C Run-Time Library Reference Manual for OpenVMS systems"
+	 section 10.7 "Handling Different Character Sets".  */
+      cp = "ISO8859-1" "\0" "ISO-8859-1" "\0"
+	   "ISO8859-2" "\0" "ISO-8859-2" "\0"
+	   "ISO8859-5" "\0" "ISO-8859-5" "\0"
+	   "ISO8859-7" "\0" "ISO-8859-7" "\0"
+	   "ISO8859-8" "\0" "ISO-8859-8" "\0"
+	   "ISO8859-9" "\0" "ISO-8859-9" "\0"
+	   /* Japanese */
+	   "eucJP" "\0" "EUC-JP" "\0"
+	   "SJIS" "\0" "SHIFT_JIS" "\0"
+	   "DECKANJI" "\0" "DEC-KANJI" "\0"
+	   "SDECKANJI" "\0" "EUC-JP" "\0"
+	   /* Chinese */
+	   "eucTW" "\0" "EUC-TW" "\0"
+	   "DECHANYU" "\0" "DEC-HANYU" "\0"
+	   "DECHANZI" "\0" "GB2312" "\0"
+	   /* Korean */
+	   "DECKOREAN" "\0" "EUC-KR" "\0";
+# endif
+
+# if defined WIN32
+      /* To avoid the troubles of installing a separate file in the same
+	 directory as the DLL and of retrieving the DLL's directory at
+	 runtime, simply inline the aliases here.  */
+
+      cp = "CP936" "\0" "GBK" "\0"
+	   "CP1361" "\0" "JOHAB" "\0"
+	   "CP20127" "\0" "ASCII" "\0"
+	   "CP20866" "\0" "KOI8-R" "\0"
+	   "CP21866" "\0" "KOI8-RU" "\0"
+	   "CP28591" "\0" "ISO-8859-1" "\0"
+	   "CP28592" "\0" "ISO-8859-2" "\0"
+	   "CP28593" "\0" "ISO-8859-3" "\0"
+	   "CP28594" "\0" "ISO-8859-4" "\0"
+	   "CP28595" "\0" "ISO-8859-5" "\0"
+	   "CP28596" "\0" "ISO-8859-6" "\0"
+	   "CP28597" "\0" "ISO-8859-7" "\0"
+	   "CP28598" "\0" "ISO-8859-8" "\0"
+	   "CP28599" "\0" "ISO-8859-9" "\0"
+	   "CP28605" "\0" "ISO-8859-15" "\0";
+# endif
+#endif
+
+      charset_aliases = cp;
+    }
+
+  return cp;
+}
+
+/* Determine the current locale's character encoding, and canonicalize it
+   into one of the canonical names listed in config.charset.
+   The result must not be freed; it is statically allocated.
+   If the canonical name cannot be determined, the result is a non-canonical
+   name.  */
+
+#ifdef STATIC
+STATIC
+#endif
+const char *
+locale_charset ()
+{
+  const char *codeset;
+  const char *aliases;
+
+#if !(defined WIN32 || defined OS2)
+
+# if HAVE_LANGINFO_CODESET
+
+  /* Most systems support nl_langinfo (CODESET) nowadays.  */
+  codeset = nl_langinfo (CODESET);
+
+# else
+
+  /* On old systems which lack it, use setlocale or getenv.  */
+  const char *locale = NULL;
+
+  /* But most old systems don't have a complete set of locales.  Some
+     (like SunOS 4 or DJGPP) have only the C locale.  Therefore we don't
+     use setlocale here; it would return "C" when it doesn't support the
+     locale name the user has set.  */
+#  if HAVE_SETLOCALE && 0
+  locale = setlocale (LC_CTYPE, NULL);
+#  endif
+  if (locale == NULL || locale[0] == '\0')
+    {
+      locale = getenv ("LC_ALL");
+      if (locale == NULL || locale[0] == '\0')
+	{
+	  locale = getenv ("LC_CTYPE");
+	  if (locale == NULL || locale[0] == '\0')
+	    locale = getenv ("LANG");
+	}
+    }
+
+  /* On some old systems, one used to set locale = "iso8859_1". On others,
+     you set it to "language_COUNTRY.charset". In any case, we resolve it
+     through the charset.alias file.  */
+  codeset = locale;
+
+# endif
+
+#elif defined WIN32
+
+  static char buf[2 + 10 + 1];
+
+  /* Woe32 has a function returning the locale's codepage as a number.  */
+  sprintf (buf, "CP%u", GetACP ());
+  codeset = buf;
+
+#elif defined OS2
+
+  const char *locale;
+  static char buf[2 + 10 + 1];
+  ULONG cp[3];
+  ULONG cplen;
+
+  /* Allow user to override the codeset, as set in the operating system,
+     with standard language environment variables.  */
+  locale = getenv ("LC_ALL");
+  if (locale == NULL || locale[0] == '\0')
+    {
+      locale = getenv ("LC_CTYPE");
+      if (locale == NULL || locale[0] == '\0')
+	locale = getenv ("LANG");
+    }
+  if (locale != NULL && locale[0] != '\0')
+    {
+      /* If the locale name contains an encoding after the dot, return it.  */
+      const char *dot = strchr (locale, '.');
+
+      if (dot != NULL)
+	{
+	  const char *modifier;
+
+	  dot++;
+	  /* Look for the possible @... trailer and remove it, if any.  */
+	  modifier = strchr (dot, '@');
+	  if (modifier == NULL)
+	    return dot;
+	  if (modifier - dot < sizeof (buf))
+	    {
+	      memcpy (buf, dot, modifier - dot);
+	      buf [modifier - dot] = '\0';
+	      return buf;
+	    }
+	}
+
+      /* Resolve through the charset.alias file.  */
+      codeset = locale;
+    }
+  else
+    {
+      /* OS/2 has a function returning the locale's codepage as a number.  */
+      if (DosQueryCp (sizeof (cp), cp, &cplen))
+	codeset = "";
+      else
+	{
+	  sprintf (buf, "CP%u", cp[0]);
+	  codeset = buf;
+	}
+    }
+
+#endif
+
+  if (codeset == NULL)
+    /* The canonical name cannot be determined.  */
+    codeset = "";
+
+  /* Resolve alias. */
+  for (aliases = get_charset_aliases ();
+       *aliases != '\0';
+       aliases += strlen (aliases) + 1, aliases += strlen (aliases) + 1)
+    if (strcmp (codeset, aliases) == 0
+	|| (aliases[0] == '*' && aliases[1] == '\0'))
+      {
+	codeset = aliases + strlen (aliases) + 1;
+	break;
+      }
+
+  /* Don't return an empty string.  GNU libc and GNU libiconv interpret
+     the empty string as denoting "the locale's character encoding",
+     thus GNU libiconv would call this function a second time.  */
+  if (codeset[0] == '\0')
+    codeset = "ASCII";
+
+  return codeset;
+}
diff --git a/lib/intl/localcharset.h b/lib/intl/localcharset.h
new file mode 100644
index 0000000..e529958
--- /dev/null
+++ b/lib/intl/localcharset.h
@@ -0,0 +1,43 @@
+/* localcharset.h - Determine a canonical name for the current locale's character encoding. */
+
+/* Copyright (C) 2000-2003, 2005-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _LOCALCHARSET_H
+#define _LOCALCHARSET_H
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/* Determine the current locale's character encoding, and canonicalize it
+   into one of the canonical names listed in config.charset.
+   The result must not be freed; it is statically allocated.
+   If the canonical name cannot be determined, the result is a non-canonical
+   name.  */
+extern const char * locale_charset (void);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* _LOCALCHARSET_H */
diff --git a/lib/intl/locale.alias b/lib/intl/locale.alias
new file mode 100644
index 0000000..51dd21e
--- /dev/null
+++ b/lib/intl/locale.alias
@@ -0,0 +1,78 @@
+# locale.alias - Locale name alias data base.
+#
+#   Copyright (C) 1996,1997,1998,1999,2000,2001,2005-2009 Free Software Foundation, Inc.
+#
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+# The format of this file is the same as for the corresponding file of
+# the X Window System, which normally can be found in
+#	/usr/lib/X11/locale/locale.alias
+# A single line contains two fields: an alias and a substitution value.
+# All entries are case independent.
+
+# Note: This file is far from being complete.  If you have a value for
+# your own site which you think might be useful for others too, share
+# it with the rest of us.  Send it using the `glibcbug' script to
+# bugs@gnu.org.
+
+# Packages using this file: 
+
+bokmal		no_NO.ISO-8859-1
+bokmål		no_NO.ISO-8859-1
+catalan		ca_ES.ISO-8859-1
+croatian	hr_HR.ISO-8859-2
+czech		cs_CZ.ISO-8859-2
+danish          da_DK.ISO-8859-1
+dansk		da_DK.ISO-8859-1
+deutsch		de_DE.ISO-8859-1
+dutch		nl_NL.ISO-8859-1
+eesti		et_EE.ISO-8859-1
+estonian	et_EE.ISO-8859-1
+finnish         fi_FI.ISO-8859-1
+français	fr_FR.ISO-8859-1
+french		fr_FR.ISO-8859-1
+galego		gl_ES.ISO-8859-1
+galician	gl_ES.ISO-8859-1
+german		de_DE.ISO-8859-1
+greek           el_GR.ISO-8859-7
+hebrew          he_IL.ISO-8859-8
+hrvatski	hr_HR.ISO-8859-2
+hungarian       hu_HU.ISO-8859-2
+icelandic       is_IS.ISO-8859-1
+italian         it_IT.ISO-8859-1
+japanese	ja_JP.eucJP
+japanese.euc	ja_JP.eucJP
+ja_JP		ja_JP.eucJP
+ja_JP.ujis	ja_JP.eucJP
+japanese.sjis	ja_JP.SJIS
+korean		ko_KR.eucKR
+korean.euc 	ko_KR.eucKR
+ko_KR		ko_KR.eucKR
+lithuanian      lt_LT.ISO-8859-13
+nb_NO		no_NO.ISO-8859-1
+nb_NO.ISO-8859-1 no_NO.ISO-8859-1
+norwegian       no_NO.ISO-8859-1
+nynorsk		nn_NO.ISO-8859-1
+polish          pl_PL.ISO-8859-2
+portuguese      pt_PT.ISO-8859-1
+romanian        ro_RO.ISO-8859-2
+russian         ru_RU.ISO-8859-5
+slovak          sk_SK.ISO-8859-2
+slovene         sl_SI.ISO-8859-2
+slovenian       sl_SI.ISO-8859-2
+spanish         es_ES.ISO-8859-1
+swedish         sv_SE.ISO-8859-1
+thai		th_TH.TIS-620
+turkish         tr_TR.ISO-8859-9
diff --git a/lib/intl/localealias.c b/lib/intl/localealias.c
new file mode 100644
index 0000000..7a730db
--- /dev/null
+++ b/lib/intl/localealias.c
@@ -0,0 +1,427 @@
+/* localealias.c - Handle aliases for locale names. */
+
+/* Copyright (C) 1995-1999, 2000-2001, 2003, 2005-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* Tell glibc's <string.h> to provide a prototype for mempcpy().
+   This must come before <config.h> because <config.h> may include
+   <features.h>, and once <features.h> has been included, it's too late.  */
+#ifndef _GNU_SOURCE
+# define _GNU_SOURCE    1
+#endif
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include <ctype.h>
+#include <stdio.h>
+#if defined _LIBC || defined HAVE___FSETLOCKING
+# include <stdio_ext.h>
+#endif
+#include <sys/types.h>
+
+#ifdef __GNUC__
+# undef alloca
+# define alloca __builtin_alloca
+# define HAVE_ALLOCA 1
+#else
+# ifdef _MSC_VER
+#  include <malloc.h>
+#  define alloca _alloca
+# else
+#  if defined HAVE_ALLOCA_H || defined _LIBC
+#   include <alloca.h>
+#  else
+#   ifdef _AIX
+ #pragma alloca
+#   else
+#    ifndef alloca
+char *alloca ();
+#    endif
+#   endif
+#  endif
+# endif
+#endif
+
+#include <stdlib.h>
+#include <string.h>
+
+#include "gettextP.h"
+
+#if ENABLE_RELOCATABLE
+# include "relocatable.h"
+#else
+# define relocate(pathname) (pathname)
+#endif
+
+/* @@ end of prolog @@ */
+
+#ifdef _LIBC
+/* Rename the non ANSI C functions.  This is required by the standard
+   because some ANSI C functions will require linking with this object
+   file and the name space must not be polluted.  */
+# define strcasecmp __strcasecmp
+
+# ifndef mempcpy
+#  define mempcpy __mempcpy
+# endif
+# define HAVE_MEMPCPY	1
+# define HAVE___FSETLOCKING	1
+
+/* We need locking here since we can be called from different places.  */
+# include <bits/libc-lock.h>
+
+__libc_lock_define_initialized (static, lock);
+#endif
+
+#ifndef internal_function
+# define internal_function
+#endif
+
+/* Some optimizations for glibc.  */
+#ifdef _LIBC
+# define FEOF(fp)		feof_unlocked (fp)
+# define FGETS(buf, n, fp)	fgets_unlocked (buf, n, fp)
+#else
+# define FEOF(fp)		feof (fp)
+# define FGETS(buf, n, fp)	fgets (buf, n, fp)
+#endif
+
+/* For those losing systems which don't have `alloca' we have to add
+   some additional code emulating it.  */
+#ifdef HAVE_ALLOCA
+# define freea(p) /* nothing */
+#else
+# define alloca(n) malloc (n)
+# define freea(p) free (p)
+#endif
+
+#if defined _LIBC_REENTRANT || defined HAVE_FGETS_UNLOCKED
+# undef fgets
+# define fgets(buf, len, s) fgets_unlocked (buf, len, s)
+#endif
+#if defined _LIBC_REENTRANT || defined HAVE_FEOF_UNLOCKED
+# undef feof
+# define feof(s) feof_unlocked (s)
+#endif
+
+
+struct alias_map
+{
+  const char *alias;
+  const char *value;
+};
+
+
+#ifndef _LIBC
+# define libc_freeres_ptr(decl) decl
+#endif
+
+libc_freeres_ptr (static char *string_space);
+static size_t string_space_act;
+static size_t string_space_max;
+libc_freeres_ptr (static struct alias_map *map);
+static size_t nmap;
+static size_t maxmap;
+
+
+/* Prototypes for local functions.  */
+static size_t read_alias_file PARAMS ((const char *fname, int fname_len))
+     internal_function;
+static int extend_alias_table PARAMS ((void));
+static int alias_compare PARAMS ((const struct alias_map *map1,
+				  const struct alias_map *map2));
+
+
+const char *
+_nl_expand_alias (name)
+    const char *name;
+{
+  static const char *locale_alias_path;
+  struct alias_map *retval;
+  const char *result = NULL;
+  size_t added;
+
+#ifdef _LIBC
+  __libc_lock_lock (lock);
+#endif
+
+  if (locale_alias_path == NULL)
+    locale_alias_path = LOCALE_ALIAS_PATH;
+
+  do
+    {
+      struct alias_map item;
+
+      item.alias = name;
+
+      if (nmap > 0)
+	retval = (struct alias_map *) bsearch (&item, map, nmap,
+					       sizeof (struct alias_map),
+					       (int (*) PARAMS ((const void *,
+								 const void *))
+						) alias_compare);
+      else
+	retval = NULL;
+
+      /* We really found an alias.  Return the value.  */
+      if (retval != NULL)
+	{
+	  result = retval->value;
+	  break;
+	}
+
+      /* Perhaps we can find another alias file.  */
+      added = 0;
+      while (added == 0 && locale_alias_path[0] != '\0')
+	{
+	  const char *start;
+
+	  while (locale_alias_path[0] == PATH_SEPARATOR)
+	    ++locale_alias_path;
+	  start = locale_alias_path;
+
+	  while (locale_alias_path[0] != '\0'
+		 && locale_alias_path[0] != PATH_SEPARATOR)
+	    ++locale_alias_path;
+
+	  if (start < locale_alias_path)
+	    added = read_alias_file (start, locale_alias_path - start);
+	}
+    }
+  while (added != 0);
+
+#ifdef _LIBC
+  __libc_lock_unlock (lock);
+#endif
+
+  return result;
+}
+
+
+static size_t
+internal_function
+read_alias_file (fname, fname_len)
+     const char *fname;
+     int fname_len;
+{
+  FILE *fp;
+  char *full_fname;
+  size_t added;
+  static const char aliasfile[] = "/locale.alias";
+
+  full_fname = (char *) alloca (fname_len + sizeof aliasfile);
+#ifdef HAVE_MEMPCPY
+  mempcpy (mempcpy (full_fname, fname, fname_len),
+	   aliasfile, sizeof aliasfile);
+#else
+  memcpy (full_fname, fname, fname_len);
+  memcpy (&full_fname[fname_len], aliasfile, sizeof aliasfile);
+#endif
+
+  fp = fopen (relocate (full_fname), "r");
+  freea (full_fname);
+  if (fp == NULL)
+    return 0;
+
+#ifdef HAVE___FSETLOCKING
+  /* No threads present.  */
+  __fsetlocking (fp, FSETLOCKING_BYCALLER);
+#endif
+
+  added = 0;
+  while (!FEOF (fp))
+    {
+      /* It is a reasonable approach to use a fix buffer here because
+	 a) we are only interested in the first two fields
+	 b) these fields must be usable as file names and so must not
+	    be that long
+	 We avoid a multi-kilobyte buffer here since this would use up
+	 stack space which we might not have if the program ran out of
+	 memory.  */
+      char buf[400];
+      char *alias;
+      char *value;
+      char *cp;
+
+      if (FGETS (buf, sizeof buf, fp) == NULL)
+	/* EOF reached.  */
+	break;
+
+      cp = buf;
+      /* Ignore leading white space.  */
+      while (isspace ((unsigned char) cp[0]))
+	++cp;
+
+      /* A leading '#' signals a comment line.  */
+      if (cp[0] != '\0' && cp[0] != '#')
+	{
+	  alias = cp++;
+	  while (cp[0] != '\0' && !isspace ((unsigned char) cp[0]))
+	    ++cp;
+	  /* Terminate alias name.  */
+	  if (cp[0] != '\0')
+	    *cp++ = '\0';
+
+	  /* Now look for the beginning of the value.  */
+	  while (isspace ((unsigned char) cp[0]))
+	    ++cp;
+
+	  if (cp[0] != '\0')
+	    {
+	      size_t alias_len;
+	      size_t value_len;
+
+	      value = cp++;
+	      while (cp[0] != '\0' && !isspace ((unsigned char) cp[0]))
+		++cp;
+	      /* Terminate value.  */
+	      if (cp[0] == '\n')
+		{
+		  /* This has to be done to make the following test
+		     for the end of line possible.  We are looking for
+		     the terminating '\n' which do not overwrite here.  */
+		  *cp++ = '\0';
+		  *cp = '\n';
+		}
+	      else if (cp[0] != '\0')
+		*cp++ = '\0';
+
+	      if (nmap >= maxmap)
+		if (__builtin_expect (extend_alias_table (), 0))
+		  {
+		    fclose (fp);
+		    return added;
+		  }
+
+	      alias_len = strlen (alias) + 1;
+	      value_len = strlen (value) + 1;
+
+	      if (string_space_act + alias_len + value_len > string_space_max)
+		{
+		  /* Increase size of memory pool.  */
+		  size_t new_size = (string_space_max
+				     + (alias_len + value_len > 1024
+					? alias_len + value_len : 1024));
+		  char *new_pool = (char *) realloc (string_space, new_size);
+		  if (new_pool == NULL)
+		    {
+		      fclose (fp);
+		      return added;
+		    }
+
+		  if (__builtin_expect (string_space != new_pool, 0))
+		    {
+		      size_t i;
+
+		      for (i = 0; i < nmap; i++)
+			{
+			  map[i].alias += new_pool - string_space;
+			  map[i].value += new_pool - string_space;
+			}
+		    }
+
+		  string_space = new_pool;
+		  string_space_max = new_size;
+		}
+
+	      map[nmap].alias = memcpy (&string_space[string_space_act],
+					alias, alias_len);
+	      string_space_act += alias_len;
+
+	      map[nmap].value = memcpy (&string_space[string_space_act],
+					value, value_len);
+	      string_space_act += value_len;
+
+	      ++nmap;
+	      ++added;
+	    }
+	}
+
+      /* Possibly not the whole line fits into the buffer.  Ignore
+	 the rest of the line.  */
+      while (strchr (buf, '\n') == NULL)
+	if (FGETS (buf, sizeof buf, fp) == NULL)
+	  /* Make sure the inner loop will be left.  The outer loop
+	     will exit at the `feof' test.  */
+	  break;
+    }
+
+  /* Should we test for ferror()?  I think we have to silently ignore
+     errors.  --drepper  */
+  fclose (fp);
+
+  if (added > 0)
+    qsort (map, nmap, sizeof (struct alias_map),
+	   (int (*) PARAMS ((const void *, const void *))) alias_compare);
+
+  return added;
+}
+
+
+static int
+extend_alias_table ()
+{
+  size_t new_size;
+  struct alias_map *new_map;
+
+  new_size = maxmap == 0 ? 100 : 2 * maxmap;
+  new_map = (struct alias_map *) realloc (map, (new_size
+						* sizeof (struct alias_map)));
+  if (new_map == NULL)
+    /* Simply don't extend: we don't have any more core.  */
+    return -1;
+
+  map = new_map;
+  maxmap = new_size;
+  return 0;
+}
+
+
+static int
+alias_compare (map1, map2)
+     const struct alias_map *map1;
+     const struct alias_map *map2;
+{
+#if defined _LIBC || defined HAVE_STRCASECMP
+  return strcasecmp (map1->alias, map2->alias);
+#else
+  const unsigned char *p1 = (const unsigned char *) map1->alias;
+  const unsigned char *p2 = (const unsigned char *) map2->alias;
+  unsigned char c1, c2;
+
+  if (p1 == p2)
+    return 0;
+
+  do
+    {
+      /* I know this seems to be odd but the tolower() function in
+	 some systems libc cannot handle nonalpha characters.  */
+      c1 = isupper (*p1) ? tolower (*p1) : *p1;
+      c2 = isupper (*p2) ? tolower (*p2) : *p2;
+      if (c1 == '\0')
+	break;
+      ++p1;
+      ++p2;
+    }
+  while (c1 == c2);
+
+  return c1 - c2;
+#endif
+}
diff --git a/lib/intl/localename.c b/lib/intl/localename.c
new file mode 100644
index 0000000..795a34f
--- /dev/null
+++ b/lib/intl/localename.c
@@ -0,0 +1,774 @@
+/* localename.c - Determine the current selected locale. */
+
+/* Copyright (C) 1995-1999, 2000-2002, 2005-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* Written by Ulrich Drepper <drepper@gnu.org>, 1995.  */
+/* Win32 code written by Tor Lillqvist <tml@iki.fi>.  */
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include <stdlib.h>
+#include <locale.h>
+
+#if defined _WIN32 || defined __WIN32__
+# undef WIN32   /* avoid warning on mingw32 */
+# define WIN32
+#endif
+
+#ifdef WIN32
+# define WIN32_LEAN_AND_MEAN
+# include <windows.h>
+/* Mingw headers don't have latest language and sublanguage codes.  */
+# ifndef LANG_AFRIKAANS
+# define LANG_AFRIKAANS 0x36
+# endif
+# ifndef LANG_ALBANIAN
+# define LANG_ALBANIAN 0x1c
+# endif
+# ifndef LANG_ARABIC
+# define LANG_ARABIC 0x01
+# endif
+# ifndef LANG_ARMENIAN
+# define LANG_ARMENIAN 0x2b
+# endif
+# ifndef LANG_ASSAMESE
+# define LANG_ASSAMESE 0x4d
+# endif
+# ifndef LANG_AZERI
+# define LANG_AZERI 0x2c
+# endif
+# ifndef LANG_BASQUE
+# define LANG_BASQUE 0x2d
+# endif
+# ifndef LANG_BELARUSIAN
+# define LANG_BELARUSIAN 0x23
+# endif
+# ifndef LANG_BENGALI
+# define LANG_BENGALI 0x45
+# endif
+# ifndef LANG_CATALAN
+# define LANG_CATALAN 0x03
+# endif
+# ifndef LANG_DIVEHI
+# define LANG_DIVEHI 0x65
+# endif
+# ifndef LANG_ESTONIAN
+# define LANG_ESTONIAN 0x25
+# endif
+# ifndef LANG_FAEROESE
+# define LANG_FAEROESE 0x38
+# endif
+# ifndef LANG_FARSI
+# define LANG_FARSI 0x29
+# endif
+# ifndef LANG_GALICIAN
+# define LANG_GALICIAN 0x56
+# endif
+# ifndef LANG_GEORGIAN
+# define LANG_GEORGIAN 0x37
+# endif
+# ifndef LANG_GUJARATI
+# define LANG_GUJARATI 0x47
+# endif
+# ifndef LANG_HEBREW
+# define LANG_HEBREW 0x0d
+# endif
+# ifndef LANG_HINDI
+# define LANG_HINDI 0x39
+# endif
+# ifndef LANG_INDONESIAN
+# define LANG_INDONESIAN 0x21
+# endif
+# ifndef LANG_KANNADA
+# define LANG_KANNADA 0x4b
+# endif
+# ifndef LANG_KASHMIRI
+# define LANG_KASHMIRI 0x60
+# endif
+# ifndef LANG_KAZAK
+# define LANG_KAZAK 0x3f
+# endif
+# ifndef LANG_KONKANI
+# define LANG_KONKANI 0x57
+# endif
+# ifndef LANG_KYRGYZ
+# define LANG_KYRGYZ 0x40
+# endif
+# ifndef LANG_LATVIAN
+# define LANG_LATVIAN 0x26
+# endif
+# ifndef LANG_LITHUANIAN
+# define LANG_LITHUANIAN 0x27
+# endif
+# ifndef LANG_MACEDONIAN
+# define LANG_MACEDONIAN 0x2f
+# endif
+# ifndef LANG_MALAY
+# define LANG_MALAY 0x3e
+# endif
+# ifndef LANG_MALAYALAM
+# define LANG_MALAYALAM 0x4c
+# endif
+# ifndef LANG_MANIPURI
+# define LANG_MANIPURI 0x58
+# endif
+# ifndef LANG_MARATHI
+# define LANG_MARATHI 0x4e
+# endif
+# ifndef LANG_MONGOLIAN
+# define LANG_MONGOLIAN 0x50
+# endif
+# ifndef LANG_NEPALI
+# define LANG_NEPALI 0x61
+# endif
+# ifndef LANG_ORIYA
+# define LANG_ORIYA 0x48
+# endif
+# ifndef LANG_PUNJABI
+# define LANG_PUNJABI 0x46
+# endif
+# ifndef LANG_SANSKRIT
+# define LANG_SANSKRIT 0x4f
+# endif
+# ifndef LANG_SERBIAN
+# define LANG_SERBIAN 0x1a
+# endif
+# ifndef LANG_SINDHI
+# define LANG_SINDHI 0x59
+# endif
+# ifndef LANG_SLOVAK
+# define LANG_SLOVAK 0x1b
+# endif
+# ifndef LANG_SORBIAN
+# define LANG_SORBIAN 0x2e
+# endif
+# ifndef LANG_SWAHILI
+# define LANG_SWAHILI 0x41
+# endif
+# ifndef LANG_SYRIAC
+# define LANG_SYRIAC 0x5a
+# endif
+# ifndef LANG_TAMIL
+# define LANG_TAMIL 0x49
+# endif
+# ifndef LANG_TATAR
+# define LANG_TATAR 0x44
+# endif
+# ifndef LANG_TELUGU
+# define LANG_TELUGU 0x4a
+# endif
+# ifndef LANG_THAI
+# define LANG_THAI 0x1e
+# endif
+# ifndef LANG_UKRAINIAN
+# define LANG_UKRAINIAN 0x22
+# endif
+# ifndef LANG_URDU
+# define LANG_URDU 0x20
+# endif
+# ifndef LANG_UZBEK
+# define LANG_UZBEK 0x43
+# endif
+# ifndef LANG_VIETNAMESE
+# define LANG_VIETNAMESE 0x2a
+# endif
+# ifndef SUBLANG_ARABIC_SAUDI_ARABIA
+# define SUBLANG_ARABIC_SAUDI_ARABIA 0x01
+# endif
+# ifndef SUBLANG_ARABIC_IRAQ
+# define SUBLANG_ARABIC_IRAQ 0x02
+# endif
+# ifndef SUBLANG_ARABIC_EGYPT
+# define SUBLANG_ARABIC_EGYPT 0x03
+# endif
+# ifndef SUBLANG_ARABIC_LIBYA
+# define SUBLANG_ARABIC_LIBYA 0x04
+# endif
+# ifndef SUBLANG_ARABIC_ALGERIA
+# define SUBLANG_ARABIC_ALGERIA 0x05
+# endif
+# ifndef SUBLANG_ARABIC_MOROCCO
+# define SUBLANG_ARABIC_MOROCCO 0x06
+# endif
+# ifndef SUBLANG_ARABIC_TUNISIA
+# define SUBLANG_ARABIC_TUNISIA 0x07
+# endif
+# ifndef SUBLANG_ARABIC_OMAN
+# define SUBLANG_ARABIC_OMAN 0x08
+# endif
+# ifndef SUBLANG_ARABIC_YEMEN
+# define SUBLANG_ARABIC_YEMEN 0x09
+# endif
+# ifndef SUBLANG_ARABIC_SYRIA
+# define SUBLANG_ARABIC_SYRIA 0x0a
+# endif
+# ifndef SUBLANG_ARABIC_JORDAN
+# define SUBLANG_ARABIC_JORDAN 0x0b
+# endif
+# ifndef SUBLANG_ARABIC_LEBANON
+# define SUBLANG_ARABIC_LEBANON 0x0c
+# endif
+# ifndef SUBLANG_ARABIC_KUWAIT
+# define SUBLANG_ARABIC_KUWAIT 0x0d
+# endif
+# ifndef SUBLANG_ARABIC_UAE
+# define SUBLANG_ARABIC_UAE 0x0e
+# endif
+# ifndef SUBLANG_ARABIC_BAHRAIN
+# define SUBLANG_ARABIC_BAHRAIN 0x0f
+# endif
+# ifndef SUBLANG_ARABIC_QATAR
+# define SUBLANG_ARABIC_QATAR 0x10
+# endif
+# ifndef SUBLANG_AZERI_LATIN
+# define SUBLANG_AZERI_LATIN 0x01
+# endif
+# ifndef SUBLANG_AZERI_CYRILLIC
+# define SUBLANG_AZERI_CYRILLIC 0x02
+# endif
+# ifndef SUBLANG_CHINESE_MACAU
+# define SUBLANG_CHINESE_MACAU 0x05
+# endif
+# ifndef SUBLANG_ENGLISH_SOUTH_AFRICA
+# define SUBLANG_ENGLISH_SOUTH_AFRICA 0x07
+# endif
+# ifndef SUBLANG_ENGLISH_JAMAICA
+# define SUBLANG_ENGLISH_JAMAICA 0x08
+# endif
+# ifndef SUBLANG_ENGLISH_CARIBBEAN
+# define SUBLANG_ENGLISH_CARIBBEAN 0x09
+# endif
+# ifndef SUBLANG_ENGLISH_BELIZE
+# define SUBLANG_ENGLISH_BELIZE 0x0a
+# endif
+# ifndef SUBLANG_ENGLISH_TRINIDAD
+# define SUBLANG_ENGLISH_TRINIDAD 0x0b
+# endif
+# ifndef SUBLANG_ENGLISH_ZIMBABWE
+# define SUBLANG_ENGLISH_ZIMBABWE 0x0c
+# endif
+# ifndef SUBLANG_ENGLISH_PHILIPPINES
+# define SUBLANG_ENGLISH_PHILIPPINES 0x0d
+# endif
+# ifndef SUBLANG_FRENCH_LUXEMBOURG
+# define SUBLANG_FRENCH_LUXEMBOURG 0x05
+# endif
+# ifndef SUBLANG_FRENCH_MONACO
+# define SUBLANG_FRENCH_MONACO 0x06
+# endif
+# ifndef SUBLANG_GERMAN_LUXEMBOURG
+# define SUBLANG_GERMAN_LUXEMBOURG 0x04
+# endif
+# ifndef SUBLANG_GERMAN_LIECHTENSTEIN
+# define SUBLANG_GERMAN_LIECHTENSTEIN 0x05
+# endif
+# ifndef SUBLANG_KASHMIRI_INDIA
+# define SUBLANG_KASHMIRI_INDIA 0x02
+# endif
+# ifndef SUBLANG_MALAY_MALAYSIA
+# define SUBLANG_MALAY_MALAYSIA 0x01
+# endif
+# ifndef SUBLANG_MALAY_BRUNEI_DARUSSALAM
+# define SUBLANG_MALAY_BRUNEI_DARUSSALAM 0x02
+# endif
+# ifndef SUBLANG_NEPALI_INDIA
+# define SUBLANG_NEPALI_INDIA 0x02
+# endif
+# ifndef SUBLANG_SERBIAN_LATIN
+# define SUBLANG_SERBIAN_LATIN 0x02
+# endif
+# ifndef SUBLANG_SERBIAN_CYRILLIC
+# define SUBLANG_SERBIAN_CYRILLIC 0x03
+# endif
+# ifndef SUBLANG_SPANISH_GUATEMALA
+# define SUBLANG_SPANISH_GUATEMALA 0x04
+# endif
+# ifndef SUBLANG_SPANISH_COSTA_RICA
+# define SUBLANG_SPANISH_COSTA_RICA 0x05
+# endif
+# ifndef SUBLANG_SPANISH_PANAMA
+# define SUBLANG_SPANISH_PANAMA 0x06
+# endif
+# ifndef SUBLANG_SPANISH_DOMINICAN_REPUBLIC
+# define SUBLANG_SPANISH_DOMINICAN_REPUBLIC 0x07
+# endif
+# ifndef SUBLANG_SPANISH_VENEZUELA
+# define SUBLANG_SPANISH_VENEZUELA 0x08
+# endif
+# ifndef SUBLANG_SPANISH_COLOMBIA
+# define SUBLANG_SPANISH_COLOMBIA 0x09
+# endif
+# ifndef SUBLANG_SPANISH_PERU
+# define SUBLANG_SPANISH_PERU 0x0a
+# endif
+# ifndef SUBLANG_SPANISH_ARGENTINA
+# define SUBLANG_SPANISH_ARGENTINA 0x0b
+# endif
+# ifndef SUBLANG_SPANISH_ECUADOR
+# define SUBLANG_SPANISH_ECUADOR 0x0c
+# endif
+# ifndef SUBLANG_SPANISH_CHILE
+# define SUBLANG_SPANISH_CHILE 0x0d
+# endif
+# ifndef SUBLANG_SPANISH_URUGUAY
+# define SUBLANG_SPANISH_URUGUAY 0x0e
+# endif
+# ifndef SUBLANG_SPANISH_PARAGUAY
+# define SUBLANG_SPANISH_PARAGUAY 0x0f
+# endif
+# ifndef SUBLANG_SPANISH_BOLIVIA
+# define SUBLANG_SPANISH_BOLIVIA 0x10
+# endif
+# ifndef SUBLANG_SPANISH_EL_SALVADOR
+# define SUBLANG_SPANISH_EL_SALVADOR 0x11
+# endif
+# ifndef SUBLANG_SPANISH_HONDURAS
+# define SUBLANG_SPANISH_HONDURAS 0x12
+# endif
+# ifndef SUBLANG_SPANISH_NICARAGUA
+# define SUBLANG_SPANISH_NICARAGUA 0x13
+# endif
+# ifndef SUBLANG_SPANISH_PUERTO_RICO
+# define SUBLANG_SPANISH_PUERTO_RICO 0x14
+# endif
+# ifndef SUBLANG_SWEDISH_FINLAND
+# define SUBLANG_SWEDISH_FINLAND 0x02
+# endif
+# ifndef SUBLANG_URDU_PAKISTAN
+# define SUBLANG_URDU_PAKISTAN 0x01
+# endif
+# ifndef SUBLANG_URDU_INDIA
+# define SUBLANG_URDU_INDIA 0x02
+# endif
+# ifndef SUBLANG_UZBEK_LATIN
+# define SUBLANG_UZBEK_LATIN 0x01
+# endif
+# ifndef SUBLANG_UZBEK_CYRILLIC
+# define SUBLANG_UZBEK_CYRILLIC 0x02
+# endif
+#endif
+
+/* XPG3 defines the result of 'setlocale (category, NULL)' as:
+   "Directs 'setlocale()' to query 'category' and return the current
+    setting of 'local'."
+   However it does not specify the exact format.  Neither do SUSV2 and
+   ISO C 99.  So we can use this feature only on selected systems (e.g.
+   those using GNU C Library).  */
+#if defined _LIBC || (defined __GNU_LIBRARY__ && __GNU_LIBRARY__ >= 2)
+# define HAVE_LOCALE_NULL
+#endif
+
+/* Determine the current locale's name, and canonicalize it into XPG syntax
+     language[_territory[.codeset]][@modifier]
+   The codeset part in the result is not reliable; the locale_charset()
+   should be used for codeset information instead.
+   The result must not be freed; it is statically allocated.  */
+
+const char *
+_nl_locale_name (category, categoryname)
+     int category;
+     const char *categoryname;
+{
+  const char *retval;
+
+#ifndef WIN32
+
+  /* Use the POSIX methods of looking to 'LC_ALL', 'LC_xxx', and 'LANG'.
+     On some systems this can be done by the 'setlocale' function itself.  */
+# if defined HAVE_SETLOCALE && defined HAVE_LC_MESSAGES && defined HAVE_LOCALE_NULL
+  retval = setlocale (category, NULL);
+# else
+  /* Setting of LC_ALL overwrites all other.  */
+  retval = getenv ("LC_ALL");
+  if (retval == NULL || retval[0] == '\0')
+    {
+      /* Next comes the name of the desired category.  */
+      retval = getenv (categoryname);
+      if (retval == NULL || retval[0] == '\0')
+	{
+	  /* Last possibility is the LANG environment variable.  */
+	  retval = getenv ("LANG");
+	  if (retval == NULL || retval[0] == '\0')
+	    /* We use C as the default domain.  POSIX says this is
+	       implementation defined.  */
+	    retval = "C";
+	}
+    }
+# endif
+
+  return retval;
+
+#else /* WIN32 */
+
+  /* Return an XPG style locale name language[_territory][@modifier].
+     Don't even bother determining the codeset; it's not useful in this
+     context, because message catalogs are not specific to a single
+     codeset.  */
+
+  LCID lcid;
+  LANGID langid;
+  int primary, sub;
+
+  /* Let the user override the system settings through environment
+     variables, as on POSIX systems.  */
+  retval = getenv ("LC_ALL");
+  if (retval != NULL && retval[0] != '\0')
+    return retval;
+  retval = getenv (categoryname);
+  if (retval != NULL && retval[0] != '\0')
+    return retval;
+  retval = getenv ("LANG");
+  if (retval != NULL && retval[0] != '\0')
+    return retval;
+
+  /* Use native Win32 API locale ID.  */
+  lcid = GetThreadLocale ();
+
+  /* Strip off the sorting rules, keep only the language part.  */
+  langid = LANGIDFROMLCID (lcid);
+
+  /* Split into language and territory part.  */
+  primary = PRIMARYLANGID (langid);
+  sub = SUBLANGID (langid);
+
+  /* Dispatch on language.
+     See also http://www.unicode.org/unicode/onlinedat/languages.html .
+     For details about languages, see http://www.ethnologue.com/ .  */
+  switch (primary)
+    {
+    case LANG_AFRIKAANS: return "af_ZA";
+    case LANG_ALBANIAN: return "sq_AL";
+    case 0x5e: /* AMHARIC */ return "am_ET";
+    case LANG_ARABIC:
+      switch (sub)
+	{
+	case SUBLANG_ARABIC_SAUDI_ARABIA: return "ar_SA";
+	case SUBLANG_ARABIC_IRAQ: return "ar_IQ";
+	case SUBLANG_ARABIC_EGYPT: return "ar_EG";
+	case SUBLANG_ARABIC_LIBYA: return "ar_LY";
+	case SUBLANG_ARABIC_ALGERIA: return "ar_DZ";
+	case SUBLANG_ARABIC_MOROCCO: return "ar_MA";
+	case SUBLANG_ARABIC_TUNISIA: return "ar_TN";
+	case SUBLANG_ARABIC_OMAN: return "ar_OM";
+	case SUBLANG_ARABIC_YEMEN: return "ar_YE";
+	case SUBLANG_ARABIC_SYRIA: return "ar_SY";
+	case SUBLANG_ARABIC_JORDAN: return "ar_JO";
+	case SUBLANG_ARABIC_LEBANON: return "ar_LB";
+	case SUBLANG_ARABIC_KUWAIT: return "ar_KW";
+	case SUBLANG_ARABIC_UAE: return "ar_AE";
+	case SUBLANG_ARABIC_BAHRAIN: return "ar_BH";
+	case SUBLANG_ARABIC_QATAR: return "ar_QA";
+	}
+      return "ar";
+    case LANG_ARMENIAN: return "hy_AM";
+    case LANG_ASSAMESE: return "as_IN";
+    case LANG_AZERI:
+      switch (sub)
+	{
+	/* FIXME: Adjust this when Azerbaijani locales appear on Unix.  */
+	case SUBLANG_AZERI_LATIN: return "az_AZ@latin";
+	case SUBLANG_AZERI_CYRILLIC: return "az_AZ@cyrillic";
+	}
+      return "az";
+    case LANG_BASQUE:
+      return "eu"; /* Ambiguous: could be "eu_ES" or "eu_FR".  */
+    case LANG_BELARUSIAN: return "be_BY";
+    case LANG_BENGALI: return "bn_IN";
+    case LANG_BULGARIAN: return "bg_BG";
+    case 0x55: /* BURMESE */ return "my_MM";
+    case 0x53: /* CAMBODIAN */ return "km_KH";
+    case LANG_CATALAN: return "ca_ES";
+    case 0x5c: /* CHEROKEE */ return "chr_US";
+    case LANG_CHINESE:
+      switch (sub)
+	{
+	case SUBLANG_CHINESE_TRADITIONAL: return "zh_TW";
+	case SUBLANG_CHINESE_SIMPLIFIED: return "zh_CN";
+	case SUBLANG_CHINESE_HONGKONG: return "zh_HK";
+	case SUBLANG_CHINESE_SINGAPORE: return "zh_SG";
+	case SUBLANG_CHINESE_MACAU: return "zh_MO";
+	}
+      return "zh";
+    case LANG_CROATIAN:		/* LANG_CROATIAN == LANG_SERBIAN
+				 * What used to be called Serbo-Croatian
+				 * should really now be two separate
+				 * languages because of political reasons.
+				 * (Says tml, who knows nothing about Serbian
+				 * or Croatian.)
+				 * (I can feel those flames coming already.)
+				 */
+      switch (sub)
+	{
+	case SUBLANG_DEFAULT: return "hr_HR";
+	case SUBLANG_SERBIAN_LATIN: return "sr_YU";
+	case SUBLANG_SERBIAN_CYRILLIC: return "sr_YU@cyrillic";
+	}
+      return "hr";
+    case LANG_CZECH: return "cs_CZ";
+    case LANG_DANISH: return "da_DK";
+    case LANG_DIVEHI: return "div_MV";
+    case LANG_DUTCH:
+      switch (sub)
+	{
+	case SUBLANG_DUTCH: return "nl_NL";
+	case SUBLANG_DUTCH_BELGIAN: /* FLEMISH, VLAAMS */ return "nl_BE";
+	}
+      return "nl";
+    case 0x66: /* EDO */ return "bin_NG";
+    case LANG_ENGLISH:
+      switch (sub)
+	{
+	/* SUBLANG_ENGLISH_US == SUBLANG_DEFAULT. Heh. I thought
+	 * English was the language spoken in England.
+	 * Oh well.
+	 */
+	case SUBLANG_ENGLISH_US: return "en_US";
+	case SUBLANG_ENGLISH_UK: return "en_GB";
+	case SUBLANG_ENGLISH_AUS: return "en_AU";
+	case SUBLANG_ENGLISH_CAN: return "en_CA";
+	case SUBLANG_ENGLISH_NZ: return "en_NZ";
+	case SUBLANG_ENGLISH_EIRE: return "en_IE";
+	case SUBLANG_ENGLISH_SOUTH_AFRICA: return "en_ZA";
+	case SUBLANG_ENGLISH_JAMAICA: return "en_JM";
+	case SUBLANG_ENGLISH_CARIBBEAN: return "en_GD"; /* Grenada? */
+	case SUBLANG_ENGLISH_BELIZE: return "en_BZ";
+	case SUBLANG_ENGLISH_TRINIDAD: return "en_TT";
+	case SUBLANG_ENGLISH_ZIMBABWE: return "en_ZW";
+	case SUBLANG_ENGLISH_PHILIPPINES: return "en_PH";
+	}
+      return "en";
+    case LANG_ESTONIAN: return "et_EE";
+    case LANG_FAEROESE: return "fo_FO";
+    case LANG_FARSI: return "fa_IR";
+    case LANG_FINNISH: return "fi_FI";
+    case LANG_FRENCH:
+      switch (sub)
+	{
+	case SUBLANG_FRENCH: return "fr_FR";
+	case SUBLANG_FRENCH_BELGIAN: /* WALLOON */ return "fr_BE";
+	case SUBLANG_FRENCH_CANADIAN: return "fr_CA";
+	case SUBLANG_FRENCH_SWISS: return "fr_CH";
+	case SUBLANG_FRENCH_LUXEMBOURG: return "fr_LU";
+	case SUBLANG_FRENCH_MONACO: return "fr_MC";
+	}
+      return "fr";
+    case 0x62: /* FRISIAN */ return "fy_NL";
+    case 0x67: /* FULFULDE */ return "ful_NG";
+    case 0x3c: /* GAELIC */
+      switch (sub)
+	{
+	case 0x01: /* SCOTTISH */ return "gd_GB";
+	case 0x02: /* IRISH */ return "ga_IE";
+	}
+      return "C";
+    case LANG_GALICIAN: return "gl_ES";
+    case LANG_GEORGIAN: return "ka_GE";
+    case LANG_GERMAN:
+      switch (sub)
+	{
+	case SUBLANG_GERMAN: return "de_DE";
+	case SUBLANG_GERMAN_SWISS: return "de_CH";
+	case SUBLANG_GERMAN_AUSTRIAN: return "de_AT";
+	case SUBLANG_GERMAN_LUXEMBOURG: return "de_LU";
+	case SUBLANG_GERMAN_LIECHTENSTEIN: return "de_LI";
+	}
+      return "de";
+    case LANG_GREEK: return "el_GR";
+    case 0x74: /* GUARANI */ return "gn_PY";
+    case LANG_GUJARATI: return "gu_IN";
+    case 0x68: /* HAUSA */ return "ha_NG";
+    case 0x75: /* HAWAIIAN */
+      /* FIXME: Do they mean Hawaiian ("haw_US", 1000 speakers)
+	 or Hawaii Creole English ("cpe_US", 600000 speakers)?  */
+      return "cpe_US";
+    case LANG_HEBREW: return "he_IL";
+    case LANG_HINDI: return "hi_IN";
+    case LANG_HUNGARIAN: return "hu_HU";
+    case 0x69: /* IBIBIO */ return "nic_NG";
+    case LANG_ICELANDIC: return "is_IS";
+    case 0x70: /* IGBO */ return "ibo_NG";
+    case LANG_INDONESIAN: return "id_ID";
+    case 0x5d: /* INUKTITUT */ return "iu_CA";
+    case LANG_ITALIAN:
+      switch (sub)
+	{
+	case SUBLANG_ITALIAN: return "it_IT";
+	case SUBLANG_ITALIAN_SWISS: return "it_CH";
+	}
+      return "it";
+    case LANG_JAPANESE: return "ja_JP";
+    case LANG_KANNADA: return "kn_IN";
+    case 0x71: /* KANURI */ return "kau_NG";
+    case LANG_KASHMIRI:
+      switch (sub)
+	{
+	case SUBLANG_DEFAULT: return "ks_PK";
+	case SUBLANG_KASHMIRI_INDIA: return "ks_IN";
+	}
+      return "ks";
+    case LANG_KAZAK: return "kk_KZ";
+    case LANG_KONKANI:
+      /* FIXME: Adjust this when such locales appear on Unix.  */
+      return "kok_IN";
+    case LANG_KOREAN: return "ko_KR";
+    case LANG_KYRGYZ: return "ky_KG";
+    case 0x54: /* LAO */ return "lo_LA";
+    case 0x76: /* LATIN */ return "la_VA";
+    case LANG_LATVIAN: return "lv_LV";
+    case LANG_LITHUANIAN: return "lt_LT";
+    case LANG_MACEDONIAN: return "mk_MK";
+    case LANG_MALAY:
+      switch (sub)
+	{
+	case SUBLANG_MALAY_MALAYSIA: return "ms_MY";
+	case SUBLANG_MALAY_BRUNEI_DARUSSALAM: return "ms_BN";
+	}
+      return "ms";
+    case LANG_MALAYALAM: return "ml_IN";
+    case 0x3a: /* MALTESE */ return "mt_MT";
+    case LANG_MANIPURI:
+      /* FIXME: Adjust this when such locales appear on Unix.  */
+      return "mni_IN";
+    case LANG_MARATHI: return "mr_IN";
+    case LANG_MONGOLIAN:
+      return "mn"; /* Ambiguous: could be "mn_CN" or "mn_MN".  */
+    case LANG_NEPALI:
+      switch (sub)
+	{
+	case SUBLANG_DEFAULT: return "ne_NP";
+	case SUBLANG_NEPALI_INDIA: return "ne_IN";
+	}
+      return "ne";
+    case LANG_NORWEGIAN:
+      switch (sub)
+	{
+	case SUBLANG_NORWEGIAN_BOKMAL: return "no_NO";
+	case SUBLANG_NORWEGIAN_NYNORSK: return "nn_NO";
+	}
+      return "no";
+    case LANG_ORIYA: return "or_IN";
+    case 0x72: /* OROMO */ return "om_ET";
+    case 0x79: /* PAPIAMENTU */ return "pap_AN";
+    case 0x63: /* PASHTO */
+      return "ps"; /* Ambiguous: could be "ps_PK" or "ps_AF".  */
+    case LANG_POLISH: return "pl_PL";
+    case LANG_PORTUGUESE:
+      switch (sub)
+	{
+	case SUBLANG_PORTUGUESE: return "pt_PT";
+	/* Hmm. SUBLANG_PORTUGUESE_BRAZILIAN == SUBLANG_DEFAULT.
+	   Same phenomenon as SUBLANG_ENGLISH_US == SUBLANG_DEFAULT. */
+	case SUBLANG_PORTUGUESE_BRAZILIAN: return "pt_BR";
+	}
+      return "pt";
+    case LANG_PUNJABI: return "pa_IN";
+    case 0x17: /* RHAETO-ROMANCE */ return "rm_CH";
+    case LANG_ROMANIAN: return "ro_RO";
+    case LANG_RUSSIAN:
+      return "ru"; /* Ambiguous: could be "ru_RU" or "ru_UA".  */
+    case 0x3b: /* SAMI */ return "se_NO";
+    case LANG_SANSKRIT: return "sa_IN";
+    case LANG_SINDHI: return "sd";
+    case 0x5b: /* SINHALESE */ return "si_LK";
+    case LANG_SLOVAK: return "sk_SK";
+    case LANG_SLOVENIAN: return "sl_SI";
+    case 0x77: /* SOMALI */ return "so_SO";
+    case LANG_SORBIAN:
+      /* FIXME: Adjust this when such locales appear on Unix.  */
+      return "wen_DE";
+    case LANG_SPANISH:
+      switch (sub)
+	{
+	case SUBLANG_SPANISH: return "es_ES";
+	case SUBLANG_SPANISH_MEXICAN: return "es_MX";
+	case SUBLANG_SPANISH_MODERN:
+	  return "es_ES@modern";	/* not seen on Unix */
+	case SUBLANG_SPANISH_GUATEMALA: return "es_GT";
+	case SUBLANG_SPANISH_COSTA_RICA: return "es_CR";
+	case SUBLANG_SPANISH_PANAMA: return "es_PA";
+	case SUBLANG_SPANISH_DOMINICAN_REPUBLIC: return "es_DO";
+	case SUBLANG_SPANISH_VENEZUELA: return "es_VE";
+	case SUBLANG_SPANISH_COLOMBIA: return "es_CO";
+	case SUBLANG_SPANISH_PERU: return "es_PE";
+	case SUBLANG_SPANISH_ARGENTINA: return "es_AR";
+	case SUBLANG_SPANISH_ECUADOR: return "es_EC";
+	case SUBLANG_SPANISH_CHILE: return "es_CL";
+	case SUBLANG_SPANISH_URUGUAY: return "es_UY";
+	case SUBLANG_SPANISH_PARAGUAY: return "es_PY";
+	case SUBLANG_SPANISH_BOLIVIA: return "es_BO";
+	case SUBLANG_SPANISH_EL_SALVADOR: return "es_SV";
+	case SUBLANG_SPANISH_HONDURAS: return "es_HN";
+	case SUBLANG_SPANISH_NICARAGUA: return "es_NI";
+	case SUBLANG_SPANISH_PUERTO_RICO: return "es_PR";
+	}
+      return "es";
+    case 0x30: /* SUTU */ return "bnt_TZ";
+    case LANG_SWAHILI: return "sw_KE";
+    case LANG_SWEDISH:
+      switch (sub)
+	{
+	case SUBLANG_DEFAULT: return "sv_SE";
+	case SUBLANG_SWEDISH_FINLAND: return "sv_FI";
+	}
+      return "sv";
+    case LANG_SYRIAC: return "syr_TR"; /* An extinct language.  */
+    case 0x64: /* TAGALOG */ return "tl_PH";
+    case 0x28: /* TAJIK */ return "tg_TJ";
+    case 0x5f: /* TAMAZIGHT */ return "ber_MA";
+    case LANG_TAMIL:
+      return "ta"; /* Ambiguous: could be "ta_IN" or "ta_LK" or "ta_SG".  */
+    case LANG_TATAR: return "tt_RU";
+    case LANG_TELUGU: return "te_IN";
+    case LANG_THAI: return "th_TH";
+    case 0x51: /* TIBETAN */ return "bo_CN";
+    case 0x73: /* TIGRINYA */ return "ti_ET";
+    case 0x31: /* TSONGA */ return "ts_ZA";
+    case LANG_TURKISH: return "tr_TR";
+    case 0x42: /* TURKMEN */ return "tk_TM";
+    case LANG_UKRAINIAN: return "uk_UA";
+    case LANG_URDU:
+      switch (sub)
+	{
+	case SUBLANG_URDU_PAKISTAN: return "ur_PK";
+	case SUBLANG_URDU_INDIA: return "ur_IN";
+	}
+      return "ur";
+    case LANG_UZBEK:
+      switch (sub)
+	{
+	/* FIXME: Adjust this when Uzbek locales appear on Unix.  */
+	case SUBLANG_UZBEK_LATIN: return "uz_UZ@latin";
+	case SUBLANG_UZBEK_CYRILLIC: return "uz_UZ@cyrillic";
+	}
+      return "uz";
+    case 0x33: /* VENDA */ return "ven_ZA";
+    case LANG_VIETNAMESE: return "vi_VN";
+    case 0x52: /* WELSH */ return "cy_GB";
+    case 0x34: /* XHOSA */ return "xh_ZA";
+    case 0x78: /* YI */ return "sit_CN";
+    case 0x3d: /* YIDDISH */ return "yi_IL";
+    case 0x6a: /* YORUBA */ return "yo_NG";
+    case 0x35: /* ZULU */ return "zu_ZA";
+    default: return "C";
+    }
+
+#endif
+}
diff --git a/lib/intl/log.c b/lib/intl/log.c
new file mode 100644
index 0000000..e527e87
--- /dev/null
+++ b/lib/intl/log.c
@@ -0,0 +1,106 @@
+/* log.c - Log file output. */
+
+/* Copyright (C) 2003, 2005-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* Written by Bruno Haible <bruno@clisp.org>.  */
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+/* Print an ASCII string with quotes and escape sequences where needed.  */
+static void
+print_escaped (stream, str)
+     FILE *stream;
+     const char *str;
+{
+  putc ('"', stream);
+  for (; *str != '\0'; str++)
+    if (*str == '\n')
+      {
+	fputs ("\\n\"", stream);
+	if (str[1] == '\0')
+	  return;
+	fputs ("\n\"", stream);
+      }
+    else
+      {
+	if (*str == '"' || *str == '\\')
+	  putc ('\\', stream);
+	putc (*str, stream);
+      }
+  putc ('"', stream);
+}
+
+/* Add to the log file an entry denoting a failed translation.  */
+void
+_nl_log_untranslated (logfilename, domainname, msgid1, msgid2, plural)
+     const char *logfilename;
+     const char *domainname;
+     const char *msgid1;
+     const char *msgid2;
+     int plural;
+{
+  static char *last_logfilename = NULL;
+  static FILE *last_logfile = NULL;
+  FILE *logfile;
+
+  /* Can we reuse the last opened logfile?  */
+  if (last_logfilename == NULL || strcmp (logfilename, last_logfilename) != 0)
+    {
+      /* Close the last used logfile.  */
+      if (last_logfilename != NULL)
+	{
+	  if (last_logfile != NULL)
+	    {
+	      fclose (last_logfile);
+	      last_logfile = NULL;
+	    }
+	  free (last_logfilename);
+	  last_logfilename = NULL;
+	}
+      /* Open the logfile.  */
+      last_logfilename = (char *) malloc (strlen (logfilename) + 1);
+      if (last_logfilename == NULL)
+	return;
+      strcpy (last_logfilename, logfilename);
+      last_logfile = fopen (logfilename, "a");
+      if (last_logfile == NULL)
+	return;
+    }
+  logfile = last_logfile;
+
+  fprintf (logfile, "domain ");
+  print_escaped (logfile, domainname);
+  fprintf (logfile, "\nmsgid ");
+  print_escaped (logfile, msgid1);
+  if (plural)
+    {
+      fprintf (logfile, "\nmsgid_plural ");
+      print_escaped (logfile, msgid2);
+      fprintf (logfile, "\nmsgstr[0] \"\"\n");
+    }
+  else
+    fprintf (logfile, "\nmsgstr \"\"\n");
+  putc ('\n', logfile);
+}
diff --git a/lib/intl/ngettext.c b/lib/intl/ngettext.c
new file mode 100644
index 0000000..95aafcc
--- /dev/null
+++ b/lib/intl/ngettext.c
@@ -0,0 +1,70 @@
+/* ngettext.c - Implementation of ngettext(3) function. */
+
+/* Copyright (C) 1995, 1997, 2000, 2001, 2002, 2005-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#ifdef _LIBC
+# define __need_NULL
+# include <stddef.h>
+#else
+# include <stdlib.h>		/* Just for NULL.  */
+#endif
+
+#include "gettextP.h"
+#ifdef _LIBC
+# include <libintl.h>
+#else
+# include "libgnuintl.h"
+#endif
+
+#include <locale.h>
+
+/* @@ end of prolog @@ */
+
+/* Names for the libintl functions are a problem.  They must not clash
+   with existing names and they should follow ANSI C.  But this source
+   code is also used in GNU C Library where the names have a __
+   prefix.  So we have to make a difference here.  */
+#ifdef _LIBC
+# define NGETTEXT __ngettext
+# define DCNGETTEXT __dcngettext
+#else
+# define NGETTEXT libintl_ngettext
+# define DCNGETTEXT libintl_dcngettext
+#endif
+
+/* Look up MSGID in the current default message catalog for the current
+   LC_MESSAGES locale.  If not found, returns MSGID itself (the default
+   text).  */
+char *
+NGETTEXT (msgid1, msgid2, n)
+     const char *msgid1;
+     const char *msgid2;
+     unsigned long int n;
+{
+  return DCNGETTEXT (NULL, msgid1, msgid2, n, LC_MESSAGES);
+}
+
+#ifdef _LIBC
+/* Alias for function name in GNU C Library.  */
+weak_alias (__ngettext, ngettext);
+#endif
diff --git a/lib/intl/os2compat.c b/lib/intl/os2compat.c
new file mode 100644
index 0000000..1aa9dff
--- /dev/null
+++ b/lib/intl/os2compat.c
@@ -0,0 +1,100 @@
+/* os2compat.c - OS/2 compatibility functions. */
+
+/* Copyright (C) 2001-2002, 2005-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define OS2_AWARE
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdlib.h>
+#include <string.h>
+#include <sys/param.h>
+
+/* A version of getenv() that works from DLLs */
+extern unsigned long DosScanEnv (const unsigned char *pszName, unsigned char **ppszValue);
+
+char *
+_nl_getenv (const char *name)
+{
+  unsigned char *value;
+  if (DosScanEnv (name, &value))
+    return NULL;
+  else
+    return value;
+}
+
+/* A fixed size buffer.  */
+char libintl_nl_default_dirname[MAXPATHLEN+1];
+
+char *_nlos2_libdir = NULL;
+char *_nlos2_localealiaspath = NULL;
+char *_nlos2_localedir = NULL;
+
+static __attribute__((constructor)) void
+nlos2_initialize ()
+{
+  char *root = getenv ("UNIXROOT");
+  char *gnulocaledir = getenv ("GNULOCALEDIR");
+
+  _nlos2_libdir = gnulocaledir;
+  if (!_nlos2_libdir)
+    {
+      if (root)
+        {
+          size_t sl = strlen (root);
+          _nlos2_libdir = (char *) malloc (sl + strlen (LIBDIR) + 1);
+          memcpy (_nlos2_libdir, root, sl);
+          memcpy (_nlos2_libdir + sl, LIBDIR, strlen (LIBDIR) + 1);
+        }
+      else
+        _nlos2_libdir = LIBDIR;
+    }
+
+  _nlos2_localealiaspath = gnulocaledir;
+  if (!_nlos2_localealiaspath)
+    {
+      if (root)
+        {
+          size_t sl = strlen (root);
+          _nlos2_localealiaspath = (char *) malloc (sl + strlen (LOCALE_ALIAS_PATH) + 1);
+          memcpy (_nlos2_localealiaspath, root, sl);
+          memcpy (_nlos2_localealiaspath + sl, LOCALE_ALIAS_PATH, strlen (LOCALE_ALIAS_PATH) + 1);
+        }
+     else
+        _nlos2_localealiaspath = LOCALE_ALIAS_PATH;
+    }
+
+  _nlos2_localedir = gnulocaledir;
+  if (!_nlos2_localedir)
+    {
+      if (root)
+        {
+          size_t sl = strlen (root);
+          _nlos2_localedir = (char *) malloc (sl + strlen (LOCALEDIR) + 1);
+          memcpy (_nlos2_localedir, root, sl);
+          memcpy (_nlos2_localedir + sl, LOCALEDIR, strlen (LOCALEDIR) + 1);
+        }
+      else
+        _nlos2_localedir = LOCALEDIR;
+    }
+
+  if (strlen (_nlos2_localedir) <= MAXPATHLEN)
+    strcpy (libintl_nl_default_dirname, _nlos2_localedir);
+}
diff --git a/lib/intl/os2compat.h b/lib/intl/os2compat.h
new file mode 100644
index 0000000..8de3183
--- /dev/null
+++ b/lib/intl/os2compat.h
@@ -0,0 +1,48 @@
+/* os2compat.h - OS/2 compatibility defines. */
+
+/* This file is intended to be included from config.h
+   Copyright (C) 2001-2002, 2005-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* When included from os2compat.h we need all the original definitions */
+#ifndef OS2_AWARE
+
+#undef LIBDIR
+#define LIBDIR			_nlos2_libdir
+extern char *_nlos2_libdir;
+
+#undef LOCALEDIR
+#define LOCALEDIR		_nlos2_localedir
+extern char *_nlos2_localedir;
+
+#undef LOCALE_ALIAS_PATH
+#define LOCALE_ALIAS_PATH	_nlos2_localealiaspath
+extern char *_nlos2_localealiaspath;
+
+#endif
+
+#undef HAVE_STRCASECMP
+#define HAVE_STRCASECMP 1
+#define strcasecmp stricmp
+#define strncasecmp strnicmp
+
+/* We have our own getenv() which works even if library is compiled as DLL */
+#define getenv _nl_getenv
+
+/* Older versions of gettext used -1 as the value of LC_MESSAGES */
+#define LC_MESSAGES_COMPAT (-1)
diff --git a/lib/intl/osdep.c b/lib/intl/osdep.c
new file mode 100644
index 0000000..b030022
--- /dev/null
+++ b/lib/intl/osdep.c
@@ -0,0 +1,26 @@
+/* osdep.c - OS dependent parts of libintl. */
+
+/* Copyright (C) 2001-2002, 2005-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if defined __EMX__
+# include "os2compat.c"
+#else
+/* Avoid AIX compiler warning.  */
+typedef int dummy;
+#endif
diff --git a/lib/intl/plural-exp.c b/lib/intl/plural-exp.c
new file mode 100644
index 0000000..9ed3b16
--- /dev/null
+++ b/lib/intl/plural-exp.c
@@ -0,0 +1,158 @@
+/* plural-exp.c - Expression parsing for plural form selection. */
+
+/* Copyright (C) 2000, 2001, 2005-2009 Free Software Foundation, Inc.
+   Written by Ulrich Drepper <drepper@cygnus.com>, 2000.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include <ctype.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include "plural-exp.h"
+
+#if (defined __GNUC__ && !defined __APPLE_CC__) \
+    || (defined __STDC_VERSION__ && __STDC_VERSION__ >= 199901L)
+
+/* These structs are the constant expression for the germanic plural
+   form determination.  It represents the expression  "n != 1".  */
+static const struct expression plvar =
+{
+  .nargs = 0,
+  .operation = var,
+};
+static const struct expression plone =
+{
+  .nargs = 0,
+  .operation = num,
+  .val =
+  {
+    .num = 1
+  }
+};
+struct expression GERMANIC_PLURAL =
+{
+  .nargs = 2,
+  .operation = not_equal,
+  .val =
+  {
+    .args =
+    {
+      [0] = (struct expression *) &plvar,
+      [1] = (struct expression *) &plone
+    }
+  }
+};
+
+# define INIT_GERMANIC_PLURAL()
+
+#else
+
+/* For compilers without support for ISO C 99 struct/union initializers:
+   Initialization at run-time.  */
+
+static struct expression plvar;
+static struct expression plone;
+struct expression GERMANIC_PLURAL;
+
+static void
+init_germanic_plural ()
+{
+  if (plone.val.num == 0)
+    {
+      plvar.nargs = 0;
+      plvar.operation = var;
+
+      plone.nargs = 0;
+      plone.operation = num;
+      plone.val.num = 1;
+
+      GERMANIC_PLURAL.nargs = 2;
+      GERMANIC_PLURAL.operation = not_equal;
+      GERMANIC_PLURAL.val.args[0] = &plvar;
+      GERMANIC_PLURAL.val.args[1] = &plone;
+    }
+}
+
+# define INIT_GERMANIC_PLURAL() init_germanic_plural ()
+
+#endif
+
+void
+internal_function
+EXTRACT_PLURAL_EXPRESSION (nullentry, pluralp, npluralsp)
+     const char *nullentry;
+     struct expression **pluralp;
+     unsigned long int *npluralsp;
+{
+  if (nullentry != NULL)
+    {
+      const char *plural;
+      const char *nplurals;
+
+      plural = strstr (nullentry, "plural=");
+      nplurals = strstr (nullentry, "nplurals=");
+      if (plural == NULL || nplurals == NULL)
+	goto no_plural;
+      else
+	{
+	  char *endp;
+	  unsigned long int n;
+	  struct parse_args args;
+
+	  /* First get the number.  */
+	  nplurals += 9;
+	  while (*nplurals != '\0' && isspace ((unsigned char) *nplurals))
+	    ++nplurals;
+	  if (!(*nplurals >= '0' && *nplurals <= '9'))
+	    goto no_plural;
+#if defined HAVE_STRTOUL || defined _LIBC
+	  n = strtoul (nplurals, &endp, 10);
+#else
+	  for (endp = nplurals, n = 0; *endp >= '0' && *endp <= '9'; endp++)
+	    n = n * 10 + (*endp - '0');
+#endif
+	  if (nplurals == endp)
+	    goto no_plural;
+	  *npluralsp = n;
+
+	  /* Due to the restrictions bison imposes onto the interface of the
+	     scanner function we have to put the input string and the result
+	     passed up from the parser into the same structure which address
+	     is passed down to the parser.  */
+	  plural += 7;
+	  args.cp = plural;
+	  if (PLURAL_PARSE (&args) != 0)
+	    goto no_plural;
+	  *pluralp = args.res;
+	}
+    }
+  else
+    {
+      /* By default we are using the Germanic form: singular form only
+         for `one', the plural form otherwise.  Yes, this is also what
+         English is using since English is a Germanic language.  */
+    no_plural:
+      INIT_GERMANIC_PLURAL ();
+      *pluralp = &GERMANIC_PLURAL;
+      *npluralsp = 2;
+    }
+}
diff --git a/lib/intl/plural-exp.h b/lib/intl/plural-exp.h
new file mode 100644
index 0000000..dcb0dae
--- /dev/null
+++ b/lib/intl/plural-exp.h
@@ -0,0 +1,128 @@
+/* plural-exp.h - defines for expression parsing and evaluation for plural form selection. */
+
+/* Copyright (C) 2000, 2001, 2002, 2005-2009 Free Software Foundation, Inc.
+   Written by Ulrich Drepper <drepper@cygnus.com>, 2000.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _PLURAL_EXP_H
+#define _PLURAL_EXP_H
+
+#ifndef PARAMS
+# if __STDC__ || defined __GNUC__ || defined __SUNPRO_C || defined __cplusplus || __PROTOTYPES
+#  define PARAMS(args) args
+# else
+#  define PARAMS(args) ()
+# endif
+#endif
+
+#ifndef internal_function
+# define internal_function
+#endif
+
+#ifndef attribute_hidden
+# define attribute_hidden
+#endif
+
+
+/* This is the representation of the expressions to determine the
+   plural form.  */
+struct expression
+{
+  int nargs;			/* Number of arguments.  */
+  enum operator
+  {
+    /* Without arguments:  */
+    var,			/* The variable "n".  */
+    num,			/* Decimal number.  */
+    /* Unary operators:  */
+    lnot,			/* Logical NOT.  */
+    /* Binary operators:  */
+    mult,			/* Multiplication.  */
+    divide,			/* Division.  */
+    module,			/* Modulo operation.  */
+    plus,			/* Addition.  */
+    minus,			/* Subtraction.  */
+    less_than,			/* Comparison.  */
+    greater_than,		/* Comparison.  */
+    less_or_equal,		/* Comparison.  */
+    greater_or_equal,		/* Comparison.  */
+    equal,			/* Comparison for equality.  */
+    not_equal,			/* Comparison for inequality.  */
+    land,			/* Logical AND.  */
+    lor,			/* Logical OR.  */
+    /* Ternary operators:  */
+    qmop			/* Question mark operator.  */
+  } operation;
+  union
+  {
+    unsigned long int num;	/* Number value for `num'.  */
+    struct expression *args[3];	/* Up to three arguments.  */
+  } val;
+};
+
+/* This is the data structure to pass information to the parser and get
+   the result in a thread-safe way.  */
+struct parse_args
+{
+  const char *cp;
+  struct expression *res;
+};
+
+
+/* Names for the libintl functions are a problem.  This source code is used
+   1. in the GNU C Library library,
+   2. in the GNU libintl library,
+   3. in the GNU gettext tools.
+   The function names in each situation must be different, to allow for
+   binary incompatible changes in 'struct expression'.  Furthermore,
+   1. in the GNU C Library library, the names have a __ prefix,
+   2.+3. in the GNU libintl library and in the GNU gettext tools, the names
+         must follow ANSI C and not start with __.
+   So we have to distinguish the three cases.  */
+#ifdef _LIBC
+# define FREE_EXPRESSION __gettext_free_exp
+# define PLURAL_PARSE __gettextparse
+# define GERMANIC_PLURAL __gettext_germanic_plural
+# define EXTRACT_PLURAL_EXPRESSION __gettext_extract_plural
+#elif defined (IN_LIBINTL)
+# define FREE_EXPRESSION libintl_gettext_free_exp
+# define PLURAL_PARSE libintl_gettextparse
+# define GERMANIC_PLURAL libintl_gettext_germanic_plural
+# define EXTRACT_PLURAL_EXPRESSION libintl_gettext_extract_plural
+#else
+# define FREE_EXPRESSION free_plural_expression
+# define PLURAL_PARSE parse_plural_expression
+# define GERMANIC_PLURAL germanic_plural
+# define EXTRACT_PLURAL_EXPRESSION extract_plural_expression
+#endif
+
+extern void FREE_EXPRESSION PARAMS ((struct expression *exp))
+     internal_function;
+extern int PLURAL_PARSE PARAMS ((void *arg));
+extern struct expression GERMANIC_PLURAL attribute_hidden;
+extern void EXTRACT_PLURAL_EXPRESSION PARAMS ((const char *nullentry,
+					       struct expression **pluralp,
+					       unsigned long int *npluralsp))
+     internal_function;
+
+#if !defined (_LIBC) && !defined (IN_LIBINTL)
+extern unsigned long int plural_eval PARAMS ((struct expression *pexp,
+					      unsigned long int n));
+#endif
+
+#endif /* _PLURAL_EXP_H */
diff --git a/lib/intl/plural.c b/lib/intl/plural.c
new file mode 100644
index 0000000..a003151
--- /dev/null
+++ b/lib/intl/plural.c
@@ -0,0 +1,1679 @@
+/* A Bison parser, made by GNU Bison 2.0.  */
+
+/* Skeleton parser for Yacc-like parsing with Bison,
+   Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* As a special exception, when this file is copied by Bison into a
+   Bison output file, you may use that output file without restriction.
+   This special exception was added by the Free Software Foundation
+   in version 1.24 of Bison.  */
+
+/* Written by Richard Stallman by simplifying the original so called
+   ``semantic'' parser.  */
+
+/* All symbols defined below should begin with yy or YY, to avoid
+   infringing on user name space.  This should be done even for local
+   variables, as they might otherwise be expanded by user macros.
+   There are some unavoidable exceptions within include files to
+   define necessary library symbols; they are noted "INFRINGES ON
+   USER NAME SPACE" below.  */
+
+/* Identify Bison output.  */
+#define YYBISON 1
+
+/* Skeleton name.  */
+#define YYSKELETON_NAME "yacc.c"
+
+/* Pure parsers.  */
+#define YYPURE 1
+
+/* Using locations.  */
+#define YYLSP_NEEDED 0
+
+/* Substitute the variable and function names.  */
+#define yyparse __gettextparse
+#define yylex   __gettextlex
+#define yyerror __gettexterror
+#define yylval  __gettextlval
+#define yychar  __gettextchar
+#define yydebug __gettextdebug
+#define yynerrs __gettextnerrs
+
+
+/* Tokens.  */
+#ifndef YYTOKENTYPE
+# define YYTOKENTYPE
+   /* Put the tokens into the symbol table, so that GDB and other debuggers
+      know about them.  */
+   enum yytokentype {
+     EQUOP2 = 258,
+     CMPOP2 = 259,
+     ADDOP2 = 260,
+     MULOP2 = 261,
+     NUMBER = 262
+   };
+#endif
+#define EQUOP2 258
+#define CMPOP2 259
+#define ADDOP2 260
+#define MULOP2 261
+#define NUMBER 262
+
+
+
+
+/* Copy the first part of user declarations.  */
+#line 1 "/usr/src/local/bash/bash-20080814/lib/intl/plural.y"
+
+/* plural.y - Expression parsing for plural form selection. */
+
+/* Copyright (C) 2000, 2001, 2005-2009 Free Software Foundation, Inc.
+   Written by Ulrich Drepper <drepper@cygnus.com>, 2000.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* The bison generated parser uses alloca.  AIX 3 forces us to put this
+   declaration at the beginning of the file.  The declaration in bison's
+   skeleton file comes too late.  This must come before <config.h>
+   because <config.h> may include arbitrary system headers.  */
+#if defined _AIX && !defined __GNUC__
+ #pragma alloca
+#endif
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include <stddef.h>
+#include <stdlib.h>
+#include "plural-exp.h"
+
+/* The main function generated by the parser is called __gettextparse,
+   but we want it to be called PLURAL_PARSE.  */
+#ifndef _LIBC
+# define __gettextparse PLURAL_PARSE
+#endif
+
+#define YYLEX_PARAM	&((struct parse_args *) arg)->cp
+#define YYPARSE_PARAM	arg
+
+
+/* Enabling traces.  */
+#ifndef YYDEBUG
+# define YYDEBUG 0
+#endif
+
+/* Enabling verbose error messages.  */
+#ifdef YYERROR_VERBOSE
+# undef YYERROR_VERBOSE
+# define YYERROR_VERBOSE 1
+#else
+# define YYERROR_VERBOSE 0
+#endif
+
+#if ! defined (YYSTYPE) && ! defined (YYSTYPE_IS_DECLARED)
+#line 51 "/usr/src/local/bash/bash-20080814/lib/intl/plural.y"
+typedef union YYSTYPE {
+  unsigned long int num;
+  enum operator op;
+  struct expression *exp;
+} YYSTYPE;
+/* Line 190 of yacc.c.  */
+#line 152 "/usr/src/local/bash/bash-20080814/lib/intl/plural.c"
+# define yystype YYSTYPE /* obsolescent; will be withdrawn */
+# define YYSTYPE_IS_DECLARED 1
+# define YYSTYPE_IS_TRIVIAL 1
+#endif
+
+
+
+/* Copy the second part of user declarations.  */
+#line 57 "/usr/src/local/bash/bash-20080814/lib/intl/plural.y"
+
+/* Prototypes for local functions.  */
+static struct expression *new_exp PARAMS ((int nargs, enum operator op,
+					   struct expression * const *args));
+static inline struct expression *new_exp_0 PARAMS ((enum operator op));
+static inline struct expression *new_exp_1 PARAMS ((enum operator op,
+						   struct expression *right));
+static struct expression *new_exp_2 PARAMS ((enum operator op,
+					     struct expression *left,
+					     struct expression *right));
+static inline struct expression *new_exp_3 PARAMS ((enum operator op,
+						   struct expression *bexp,
+						   struct expression *tbranch,
+						   struct expression *fbranch));
+static int yylex PARAMS ((YYSTYPE *lval, const char **pexp));
+static void yyerror PARAMS ((const char *str));
+
+/* Allocation of expressions.  */
+
+static struct expression *
+new_exp (nargs, op, args)
+     int nargs;
+     enum operator op;
+     struct expression * const *args;
+{
+  int i;
+  struct expression *newp;
+
+  /* If any of the argument could not be malloc'ed, just return NULL.  */
+  for (i = nargs - 1; i >= 0; i--)
+    if (args[i] == NULL)
+      goto fail;
+
+  /* Allocate a new expression.  */
+  newp = (struct expression *) malloc (sizeof (*newp));
+  if (newp != NULL)
+    {
+      newp->nargs = nargs;
+      newp->operation = op;
+      for (i = nargs - 1; i >= 0; i--)
+	newp->val.args[i] = args[i];
+      return newp;
+    }
+
+ fail:
+  for (i = nargs - 1; i >= 0; i--)
+    FREE_EXPRESSION (args[i]);
+
+  return NULL;
+}
+
+static inline struct expression *
+new_exp_0 (op)
+     enum operator op;
+{
+  return new_exp (0, op, NULL);
+}
+
+static inline struct expression *
+new_exp_1 (op, right)
+     enum operator op;
+     struct expression *right;
+{
+  struct expression *args[1];
+
+  args[0] = right;
+  return new_exp (1, op, args);
+}
+
+static struct expression *
+new_exp_2 (op, left, right)
+     enum operator op;
+     struct expression *left;
+     struct expression *right;
+{
+  struct expression *args[2];
+
+  args[0] = left;
+  args[1] = right;
+  return new_exp (2, op, args);
+}
+
+static inline struct expression *
+new_exp_3 (op, bexp, tbranch, fbranch)
+     enum operator op;
+     struct expression *bexp;
+     struct expression *tbranch;
+     struct expression *fbranch;
+{
+  struct expression *args[3];
+
+  args[0] = bexp;
+  args[1] = tbranch;
+  args[2] = fbranch;
+  return new_exp (3, op, args);
+}
+
+
+
+/* Line 213 of yacc.c.  */
+#line 262 "/usr/src/local/bash/bash-20080814/lib/intl/plural.c"
+
+#if ! defined (yyoverflow) || YYERROR_VERBOSE
+
+# ifndef YYFREE
+#  define YYFREE free
+# endif
+# ifndef YYMALLOC
+#  define YYMALLOC malloc
+# endif
+
+/* The parser invokes alloca or malloc; define the necessary symbols.  */
+
+# ifdef YYSTACK_USE_ALLOCA
+#  if YYSTACK_USE_ALLOCA
+#   ifdef __GNUC__
+#    define YYSTACK_ALLOC __builtin_alloca
+#   else
+#    define YYSTACK_ALLOC alloca
+#   endif
+#  endif
+# endif
+
+# ifdef YYSTACK_ALLOC
+   /* Pacify GCC's `empty if-body' warning. */
+#  define YYSTACK_FREE(Ptr) do { /* empty */; } while (0)
+# else
+#  if defined (__STDC__) || defined (__cplusplus)
+#   include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
+#   define YYSIZE_T size_t
+#  endif
+#  define YYSTACK_ALLOC YYMALLOC
+#  define YYSTACK_FREE YYFREE
+# endif
+#endif /* ! defined (yyoverflow) || YYERROR_VERBOSE */
+
+
+#if (! defined (yyoverflow) \
+     && (! defined (__cplusplus) \
+	 || (defined (YYSTYPE_IS_TRIVIAL) && YYSTYPE_IS_TRIVIAL)))
+
+/* A type that is properly aligned for any stack member.  */
+union yyalloc
+{
+  short int yyss;
+  YYSTYPE yyvs;
+  };
+
+/* The size of the maximum gap between one aligned stack and the next.  */
+# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1)
+
+/* The size of an array large to enough to hold all stacks, each with
+   N elements.  */
+# define YYSTACK_BYTES(N) \
+     ((N) * (sizeof (short int) + sizeof (YYSTYPE))			\
+      + YYSTACK_GAP_MAXIMUM)
+
+/* Copy COUNT objects from FROM to TO.  The source and destination do
+   not overlap.  */
+# ifndef YYCOPY
+#  if defined (__GNUC__) && 1 < __GNUC__
+#   define YYCOPY(To, From, Count) \
+      __builtin_memcpy (To, From, (Count) * sizeof (*(From)))
+#  else
+#   define YYCOPY(To, From, Count)		\
+      do					\
+	{					\
+	  register YYSIZE_T yyi;		\
+	  for (yyi = 0; yyi < (Count); yyi++)	\
+	    (To)[yyi] = (From)[yyi];		\
+	}					\
+      while (0)
+#  endif
+# endif
+
+/* Relocate STACK from its old location to the new one.  The
+   local variables YYSIZE and YYSTACKSIZE give the old and new number of
+   elements in the stack, and YYPTR gives the new location of the
+   stack.  Advance YYPTR to a properly aligned location for the next
+   stack.  */
+# define YYSTACK_RELOCATE(Stack)					\
+    do									\
+      {									\
+	YYSIZE_T yynewbytes;						\
+	YYCOPY (&yyptr->Stack, Stack, yysize);				\
+	Stack = &yyptr->Stack;						\
+	yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \
+	yyptr += yynewbytes / sizeof (*yyptr);				\
+      }									\
+    while (0)
+
+#endif
+
+#if defined (__STDC__) || defined (__cplusplus)
+   typedef signed char yysigned_char;
+#else
+   typedef short int yysigned_char;
+#endif
+
+/* YYFINAL -- State number of the termination state. */
+#define YYFINAL  9
+/* YYLAST -- Last index in YYTABLE.  */
+#define YYLAST   54
+
+/* YYNTOKENS -- Number of terminals. */
+#define YYNTOKENS  16
+/* YYNNTS -- Number of nonterminals. */
+#define YYNNTS  3
+/* YYNRULES -- Number of rules. */
+#define YYNRULES  13
+/* YYNRULES -- Number of states. */
+#define YYNSTATES  27
+
+/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX.  */
+#define YYUNDEFTOK  2
+#define YYMAXUTOK   262
+
+#define YYTRANSLATE(YYX) 						\
+  ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK)
+
+/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX.  */
+static const unsigned char yytranslate[] =
+{
+       0,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,    10,     2,     2,     2,     2,     5,     2,
+      14,    15,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,    12,     2,
+       2,     2,     2,     3,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+      13,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     4,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     1,     2,     6,     7,
+       8,     9,    11
+};
+
+#if YYDEBUG
+/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in
+   YYRHS.  */
+static const unsigned char yyprhs[] =
+{
+       0,     0,     3,     5,    11,    15,    19,    23,    27,    31,
+      35,    38,    40,    42
+};
+
+/* YYRHS -- A `-1'-separated list of the rules' RHS. */
+static const yysigned_char yyrhs[] =
+{
+      17,     0,    -1,    18,    -1,    18,     3,    18,    12,    18,
+      -1,    18,     4,    18,    -1,    18,     5,    18,    -1,    18,
+       6,    18,    -1,    18,     7,    18,    -1,    18,     8,    18,
+      -1,    18,     9,    18,    -1,    10,    18,    -1,    13,    -1,
+      11,    -1,    14,    18,    15,    -1
+};
+
+/* YYRLINE[YYN] -- source line where rule number YYN was defined.  */
+static const unsigned char yyrline[] =
+{
+       0,   176,   176,   184,   188,   192,   196,   200,   204,   208,
+     212,   216,   220,   225
+};
+#endif
+
+#if YYDEBUG || YYERROR_VERBOSE
+/* YYTNME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM.
+   First, the terminals, then, starting at YYNTOKENS, nonterminals. */
+static const char *const yytname[] =
+{
+  "$end", "error", "$undefined", "'?'", "'|'", "'&'", "EQUOP2", "CMPOP2",
+  "ADDOP2", "MULOP2", "'!'", "NUMBER", "':'", "'n'", "'('", "')'",
+  "$accept", "start", "exp", 0
+};
+#endif
+
+# ifdef YYPRINT
+/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to
+   token YYLEX-NUM.  */
+static const unsigned short int yytoknum[] =
+{
+       0,   256,   257,    63,   124,    38,   258,   259,   260,   261,
+      33,   262,    58,   110,    40,    41
+};
+# endif
+
+/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives.  */
+static const unsigned char yyr1[] =
+{
+       0,    16,    17,    18,    18,    18,    18,    18,    18,    18,
+      18,    18,    18,    18
+};
+
+/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN.  */
+static const unsigned char yyr2[] =
+{
+       0,     2,     1,     5,     3,     3,     3,     3,     3,     3,
+       2,     1,     1,     3
+};
+
+/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state
+   STATE-NUM when YYTABLE doesn't specify something else to do.  Zero
+   means the default is an error.  */
+static const unsigned char yydefact[] =
+{
+       0,     0,    12,    11,     0,     0,     2,    10,     0,     1,
+       0,     0,     0,     0,     0,     0,     0,    13,     0,     4,
+       5,     6,     7,     8,     9,     0,     3
+};
+
+/* YYDEFGOTO[NTERM-NUM]. */
+static const yysigned_char yydefgoto[] =
+{
+      -1,     5,     6
+};
+
+/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
+   STATE-NUM.  */
+#define YYPACT_NINF -10
+static const yysigned_char yypact[] =
+{
+      -9,    -9,   -10,   -10,    -9,     8,    36,   -10,    13,   -10,
+      -9,    -9,    -9,    -9,    -9,    -9,    -9,   -10,    26,    41,
+      45,    18,    -2,    14,   -10,    -9,    36
+};
+
+/* YYPGOTO[NTERM-NUM].  */
+static const yysigned_char yypgoto[] =
+{
+     -10,   -10,    -1
+};
+
+/* YYTABLE[YYPACT[STATE-NUM]].  What to do in state STATE-NUM.  If
+   positive, shift that token.  If negative, reduce the rule which
+   number is the opposite.  If zero, do what YYDEFACT says.
+   If YYTABLE_NINF, syntax error.  */
+#define YYTABLE_NINF -1
+static const unsigned char yytable[] =
+{
+       7,     1,     2,     8,     3,     4,    15,    16,     9,    18,
+      19,    20,    21,    22,    23,    24,    10,    11,    12,    13,
+      14,    15,    16,    16,    26,    14,    15,    16,    17,    10,
+      11,    12,    13,    14,    15,    16,     0,     0,    25,    10,
+      11,    12,    13,    14,    15,    16,    12,    13,    14,    15,
+      16,    13,    14,    15,    16
+};
+
+static const yysigned_char yycheck[] =
+{
+       1,    10,    11,     4,    13,    14,     8,     9,     0,    10,
+      11,    12,    13,    14,    15,    16,     3,     4,     5,     6,
+       7,     8,     9,     9,    25,     7,     8,     9,    15,     3,
+       4,     5,     6,     7,     8,     9,    -1,    -1,    12,     3,
+       4,     5,     6,     7,     8,     9,     5,     6,     7,     8,
+       9,     6,     7,     8,     9
+};
+
+/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing
+   symbol of state STATE-NUM.  */
+static const unsigned char yystos[] =
+{
+       0,    10,    11,    13,    14,    17,    18,    18,    18,     0,
+       3,     4,     5,     6,     7,     8,     9,    15,    18,    18,
+      18,    18,    18,    18,    18,    12,    18
+};
+
+#if ! defined (YYSIZE_T) && defined (__SIZE_TYPE__)
+# define YYSIZE_T __SIZE_TYPE__
+#endif
+#if ! defined (YYSIZE_T) && defined (size_t)
+# define YYSIZE_T size_t
+#endif
+#if ! defined (YYSIZE_T)
+# if defined (__STDC__) || defined (__cplusplus)
+#  include <stddef.h> /* INFRINGES ON USER NAME SPACE */
+#  define YYSIZE_T size_t
+# endif
+#endif
+#if ! defined (YYSIZE_T)
+# define YYSIZE_T unsigned int
+#endif
+
+#define yyerrok		(yyerrstatus = 0)
+#define yyclearin	(yychar = YYEMPTY)
+#define YYEMPTY		(-2)
+#define YYEOF		0
+
+#define YYACCEPT	goto yyacceptlab
+#define YYABORT		goto yyabortlab
+#define YYERROR		goto yyerrorlab
+
+
+/* Like YYERROR except do call yyerror.  This remains here temporarily
+   to ease the transition to the new meaning of YYERROR, for GCC.
+   Once GCC version 2 has supplanted version 1, this can go.  */
+
+#define YYFAIL		goto yyerrlab
+
+#define YYRECOVERING()  (!!yyerrstatus)
+
+#define YYBACKUP(Token, Value)					\
+do								\
+  if (yychar == YYEMPTY && yylen == 1)				\
+    {								\
+      yychar = (Token);						\
+      yylval = (Value);						\
+      yytoken = YYTRANSLATE (yychar);				\
+      YYPOPSTACK;						\
+      goto yybackup;						\
+    }								\
+  else								\
+    { 								\
+      yyerror ("syntax error: cannot back up");\
+      YYERROR;							\
+    }								\
+while (0)
+
+
+#define YYTERROR	1
+#define YYERRCODE	256
+
+
+/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N].
+   If N is 0, then set CURRENT to the empty location which ends
+   the previous symbol: RHS[0] (always defined).  */
+
+#define YYRHSLOC(Rhs, K) ((Rhs)[K])
+#ifndef YYLLOC_DEFAULT
+# define YYLLOC_DEFAULT(Current, Rhs, N)				\
+    do									\
+      if (N)								\
+	{								\
+	  (Current).first_line   = YYRHSLOC (Rhs, 1).first_line;	\
+	  (Current).first_column = YYRHSLOC (Rhs, 1).first_column;	\
+	  (Current).last_line    = YYRHSLOC (Rhs, N).last_line;		\
+	  (Current).last_column  = YYRHSLOC (Rhs, N).last_column;	\
+	}								\
+      else								\
+	{								\
+	  (Current).first_line   = (Current).last_line   =		\
+	    YYRHSLOC (Rhs, 0).last_line;				\
+	  (Current).first_column = (Current).last_column =		\
+	    YYRHSLOC (Rhs, 0).last_column;				\
+	}								\
+    while (0)
+#endif
+
+
+/* YY_LOCATION_PRINT -- Print the location on the stream.
+   This macro was not mandated originally: define only if we know
+   we won't break user code: when these are the locations we know.  */
+
+#ifndef YY_LOCATION_PRINT
+# if YYLTYPE_IS_TRIVIAL
+#  define YY_LOCATION_PRINT(File, Loc)			\
+     fprintf (File, "%d.%d-%d.%d",			\
+              (Loc).first_line, (Loc).first_column,	\
+              (Loc).last_line,  (Loc).last_column)
+# else
+#  define YY_LOCATION_PRINT(File, Loc) ((void) 0)
+# endif
+#endif
+
+
+/* YYLEX -- calling `yylex' with the right arguments.  */
+
+#ifdef YYLEX_PARAM
+# define YYLEX yylex (&yylval, YYLEX_PARAM)
+#else
+# define YYLEX yylex (&yylval)
+#endif
+
+/* Enable debugging if requested.  */
+#if YYDEBUG
+
+# ifndef YYFPRINTF
+#  include <stdio.h> /* INFRINGES ON USER NAME SPACE */
+#  define YYFPRINTF fprintf
+# endif
+
+# define YYDPRINTF(Args)			\
+do {						\
+  if (yydebug)					\
+    YYFPRINTF Args;				\
+} while (0)
+
+# define YY_SYMBOL_PRINT(Title, Type, Value, Location)		\
+do {								\
+  if (yydebug)							\
+    {								\
+      YYFPRINTF (stderr, "%s ", Title);				\
+      yysymprint (stderr, 					\
+                  Type, Value);	\
+      YYFPRINTF (stderr, "\n");					\
+    }								\
+} while (0)
+
+/*------------------------------------------------------------------.
+| yy_stack_print -- Print the state stack from its BOTTOM up to its |
+| TOP (included).                                                   |
+`------------------------------------------------------------------*/
+
+#if defined (__STDC__) || defined (__cplusplus)
+static void
+yy_stack_print (short int *bottom, short int *top)
+#else
+static void
+yy_stack_print (bottom, top)
+    short int *bottom;
+    short int *top;
+#endif
+{
+  YYFPRINTF (stderr, "Stack now");
+  for (/* Nothing. */; bottom <= top; ++bottom)
+    YYFPRINTF (stderr, " %d", *bottom);
+  YYFPRINTF (stderr, "\n");
+}
+
+# define YY_STACK_PRINT(Bottom, Top)				\
+do {								\
+  if (yydebug)							\
+    yy_stack_print ((Bottom), (Top));				\
+} while (0)
+
+
+/*------------------------------------------------.
+| Report that the YYRULE is going to be reduced.  |
+`------------------------------------------------*/
+
+#if defined (__STDC__) || defined (__cplusplus)
+static void
+yy_reduce_print (int yyrule)
+#else
+static void
+yy_reduce_print (yyrule)
+    int yyrule;
+#endif
+{
+  int yyi;
+  unsigned int yylno = yyrline[yyrule];
+  YYFPRINTF (stderr, "Reducing stack by rule %d (line %u), ",
+             yyrule - 1, yylno);
+  /* Print the symbols being reduced, and their result.  */
+  for (yyi = yyprhs[yyrule]; 0 <= yyrhs[yyi]; yyi++)
+    YYFPRINTF (stderr, "%s ", yytname [yyrhs[yyi]]);
+  YYFPRINTF (stderr, "-> %s\n", yytname [yyr1[yyrule]]);
+}
+
+# define YY_REDUCE_PRINT(Rule)		\
+do {					\
+  if (yydebug)				\
+    yy_reduce_print (Rule);		\
+} while (0)
+
+/* Nonzero means print parse trace.  It is left uninitialized so that
+   multiple parsers can coexist.  */
+int yydebug;
+#else /* !YYDEBUG */
+# define YYDPRINTF(Args)
+# define YY_SYMBOL_PRINT(Title, Type, Value, Location)
+# define YY_STACK_PRINT(Bottom, Top)
+# define YY_REDUCE_PRINT(Rule)
+#endif /* !YYDEBUG */
+
+
+/* YYINITDEPTH -- initial size of the parser's stacks.  */
+#ifndef	YYINITDEPTH
+# define YYINITDEPTH 200
+#endif
+
+/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only
+   if the built-in stack extension method is used).
+
+   Do not make this value too large; the results are undefined if
+   SIZE_MAX < YYSTACK_BYTES (YYMAXDEPTH)
+   evaluated with infinite-precision integer arithmetic.  */
+
+#ifndef YYMAXDEPTH
+# define YYMAXDEPTH 10000
+#endif
+
+
+
+#if YYERROR_VERBOSE
+
+# ifndef yystrlen
+#  if defined (__GLIBC__) && defined (_STRING_H)
+#   define yystrlen strlen
+#  else
+/* Return the length of YYSTR.  */
+static YYSIZE_T
+#   if defined (__STDC__) || defined (__cplusplus)
+yystrlen (const char *yystr)
+#   else
+yystrlen (yystr)
+     const char *yystr;
+#   endif
+{
+  register const char *yys = yystr;
+
+  while (*yys++ != '\0')
+    continue;
+
+  return yys - yystr - 1;
+}
+#  endif
+# endif
+
+# ifndef yystpcpy
+#  if defined (__GLIBC__) && defined (_STRING_H) && defined (_GNU_SOURCE)
+#   define yystpcpy stpcpy
+#  else
+/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in
+   YYDEST.  */
+static char *
+#   if defined (__STDC__) || defined (__cplusplus)
+yystpcpy (char *yydest, const char *yysrc)
+#   else
+yystpcpy (yydest, yysrc)
+     char *yydest;
+     const char *yysrc;
+#   endif
+{
+  register char *yyd = yydest;
+  register const char *yys = yysrc;
+
+  while ((*yyd++ = *yys++) != '\0')
+    continue;
+
+  return yyd - 1;
+}
+#  endif
+# endif
+
+#endif /* !YYERROR_VERBOSE */
+
+
+
+#if YYDEBUG
+/*--------------------------------.
+| Print this symbol on YYOUTPUT.  |
+`--------------------------------*/
+
+#if defined (__STDC__) || defined (__cplusplus)
+static void
+yysymprint (FILE *yyoutput, int yytype, YYSTYPE *yyvaluep)
+#else
+static void
+yysymprint (yyoutput, yytype, yyvaluep)
+    FILE *yyoutput;
+    int yytype;
+    YYSTYPE *yyvaluep;
+#endif
+{
+  /* Pacify ``unused variable'' warnings.  */
+  (void) yyvaluep;
+
+  if (yytype < YYNTOKENS)
+    YYFPRINTF (yyoutput, "token %s (", yytname[yytype]);
+  else
+    YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]);
+
+
+# ifdef YYPRINT
+  if (yytype < YYNTOKENS)
+    YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep);
+# endif
+  switch (yytype)
+    {
+      default:
+        break;
+    }
+  YYFPRINTF (yyoutput, ")");
+}
+
+#endif /* ! YYDEBUG */
+/*-----------------------------------------------.
+| Release the memory associated to this symbol.  |
+`-----------------------------------------------*/
+
+#if defined (__STDC__) || defined (__cplusplus)
+static void
+yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep)
+#else
+static void
+yydestruct (yymsg, yytype, yyvaluep)
+    const char *yymsg;
+    int yytype;
+    YYSTYPE *yyvaluep;
+#endif
+{
+  /* Pacify ``unused variable'' warnings.  */
+  (void) yyvaluep;
+
+  if (!yymsg)
+    yymsg = "Deleting";
+  YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp);
+
+  switch (yytype)
+    {
+
+      default:
+        break;
+    }
+}
+
+
+/* Prevent warnings from -Wmissing-prototypes.  */
+
+#ifdef YYPARSE_PARAM
+# if defined (__STDC__) || defined (__cplusplus)
+int yyparse (void *YYPARSE_PARAM);
+# else
+int yyparse ();
+# endif
+#else /* ! YYPARSE_PARAM */
+#if defined (__STDC__) || defined (__cplusplus)
+int yyparse (void);
+#else
+int yyparse ();
+#endif
+#endif /* ! YYPARSE_PARAM */
+
+
+
+
+
+
+/*----------.
+| yyparse.  |
+`----------*/
+
+#ifdef YYPARSE_PARAM
+# if defined (__STDC__) || defined (__cplusplus)
+int yyparse (void *YYPARSE_PARAM)
+# else
+int yyparse (YYPARSE_PARAM)
+  void *YYPARSE_PARAM;
+# endif
+#else /* ! YYPARSE_PARAM */
+#if defined (__STDC__) || defined (__cplusplus)
+int
+yyparse (void)
+#else
+int
+yyparse ()
+
+#endif
+#endif
+{
+  /* The look-ahead symbol.  */
+int yychar;
+
+/* The semantic value of the look-ahead symbol.  */
+YYSTYPE yylval;
+
+/* Number of syntax errors so far.  */
+int yynerrs;
+
+  register int yystate;
+  register int yyn;
+  int yyresult;
+  /* Number of tokens to shift before error messages enabled.  */
+  int yyerrstatus;
+  /* Look-ahead token as an internal (translated) token number.  */
+  int yytoken = 0;
+
+  /* Three stacks and their tools:
+     `yyss': related to states,
+     `yyvs': related to semantic values,
+     `yyls': related to locations.
+
+     Refer to the stacks thru separate pointers, to allow yyoverflow
+     to reallocate them elsewhere.  */
+
+  /* The state stack.  */
+  short int yyssa[YYINITDEPTH];
+  short int *yyss = yyssa;
+  register short int *yyssp;
+
+  /* The semantic value stack.  */
+  YYSTYPE yyvsa[YYINITDEPTH];
+  YYSTYPE *yyvs = yyvsa;
+  register YYSTYPE *yyvsp;
+
+
+
+#define YYPOPSTACK   (yyvsp--, yyssp--)
+
+  YYSIZE_T yystacksize = YYINITDEPTH;
+
+  /* The variables used to return semantic value and location from the
+     action routines.  */
+  YYSTYPE yyval;
+
+
+  /* When reducing, the number of symbols on the RHS of the reduced
+     rule.  */
+  int yylen;
+
+  YYDPRINTF ((stderr, "Starting parse\n"));
+
+  yystate = 0;
+  yyerrstatus = 0;
+  yynerrs = 0;
+  yychar = YYEMPTY;		/* Cause a token to be read.  */
+
+  /* Initialize stack pointers.
+     Waste one element of value and location stack
+     so that they stay on the same level as the state stack.
+     The wasted elements are never initialized.  */
+
+  yyssp = yyss;
+  yyvsp = yyvs;
+
+
+  yyvsp[0] = yylval;
+
+  goto yysetstate;
+
+/*------------------------------------------------------------.
+| yynewstate -- Push a new state, which is found in yystate.  |
+`------------------------------------------------------------*/
+ yynewstate:
+  /* In all cases, when you get here, the value and location stacks
+     have just been pushed. so pushing a state here evens the stacks.
+     */
+  yyssp++;
+
+ yysetstate:
+  *yyssp = yystate;
+
+  if (yyss + yystacksize - 1 <= yyssp)
+    {
+      /* Get the current used size of the three stacks, in elements.  */
+      YYSIZE_T yysize = yyssp - yyss + 1;
+
+#ifdef yyoverflow
+      {
+	/* Give user a chance to reallocate the stack. Use copies of
+	   these so that the &'s don't force the real ones into
+	   memory.  */
+	YYSTYPE *yyvs1 = yyvs;
+	short int *yyss1 = yyss;
+
+
+	/* Each stack pointer address is followed by the size of the
+	   data in use in that stack, in bytes.  This used to be a
+	   conditional around just the two extra args, but that might
+	   be undefined if yyoverflow is a macro.  */
+	yyoverflow ("parser stack overflow",
+		    &yyss1, yysize * sizeof (*yyssp),
+		    &yyvs1, yysize * sizeof (*yyvsp),
+
+		    &yystacksize);
+
+	yyss = yyss1;
+	yyvs = yyvs1;
+      }
+#else /* no yyoverflow */
+# ifndef YYSTACK_RELOCATE
+      goto yyoverflowlab;
+# else
+      /* Extend the stack our own way.  */
+      if (YYMAXDEPTH <= yystacksize)
+	goto yyoverflowlab;
+      yystacksize *= 2;
+      if (YYMAXDEPTH < yystacksize)
+	yystacksize = YYMAXDEPTH;
+
+      {
+	short int *yyss1 = yyss;
+	union yyalloc *yyptr =
+	  (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize));
+	if (! yyptr)
+	  goto yyoverflowlab;
+	YYSTACK_RELOCATE (yyss);
+	YYSTACK_RELOCATE (yyvs);
+
+#  undef YYSTACK_RELOCATE
+	if (yyss1 != yyssa)
+	  YYSTACK_FREE (yyss1);
+      }
+# endif
+#endif /* no yyoverflow */
+
+      yyssp = yyss + yysize - 1;
+      yyvsp = yyvs + yysize - 1;
+
+
+      YYDPRINTF ((stderr, "Stack size increased to %lu\n",
+		  (unsigned long int) yystacksize));
+
+      if (yyss + yystacksize - 1 <= yyssp)
+	YYABORT;
+    }
+
+  YYDPRINTF ((stderr, "Entering state %d\n", yystate));
+
+  goto yybackup;
+
+/*-----------.
+| yybackup.  |
+`-----------*/
+yybackup:
+
+/* Do appropriate processing given the current state.  */
+/* Read a look-ahead token if we need one and don't already have one.  */
+/* yyresume: */
+
+  /* First try to decide what to do without reference to look-ahead token.  */
+
+  yyn = yypact[yystate];
+  if (yyn == YYPACT_NINF)
+    goto yydefault;
+
+  /* Not known => get a look-ahead token if don't already have one.  */
+
+  /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol.  */
+  if (yychar == YYEMPTY)
+    {
+      YYDPRINTF ((stderr, "Reading a token: "));
+      yychar = YYLEX;
+    }
+
+  if (yychar <= YYEOF)
+    {
+      yychar = yytoken = YYEOF;
+      YYDPRINTF ((stderr, "Now at end of input.\n"));
+    }
+  else
+    {
+      yytoken = YYTRANSLATE (yychar);
+      YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc);
+    }
+
+  /* If the proper action on seeing token YYTOKEN is to reduce or to
+     detect an error, take that action.  */
+  yyn += yytoken;
+  if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken)
+    goto yydefault;
+  yyn = yytable[yyn];
+  if (yyn <= 0)
+    {
+      if (yyn == 0 || yyn == YYTABLE_NINF)
+	goto yyerrlab;
+      yyn = -yyn;
+      goto yyreduce;
+    }
+
+  if (yyn == YYFINAL)
+    YYACCEPT;
+
+  /* Shift the look-ahead token.  */
+  YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc);
+
+  /* Discard the token being shifted unless it is eof.  */
+  if (yychar != YYEOF)
+    yychar = YYEMPTY;
+
+  *++yyvsp = yylval;
+
+
+  /* Count tokens shifted since error; after three, turn off error
+     status.  */
+  if (yyerrstatus)
+    yyerrstatus--;
+
+  yystate = yyn;
+  goto yynewstate;
+
+
+/*-----------------------------------------------------------.
+| yydefault -- do the default action for the current state.  |
+`-----------------------------------------------------------*/
+yydefault:
+  yyn = yydefact[yystate];
+  if (yyn == 0)
+    goto yyerrlab;
+  goto yyreduce;
+
+
+/*-----------------------------.
+| yyreduce -- Do a reduction.  |
+`-----------------------------*/
+yyreduce:
+  /* yyn is the number of a rule to reduce with.  */
+  yylen = yyr2[yyn];
+
+  /* If YYLEN is nonzero, implement the default value of the action:
+     `$$ = $1'.
+
+     Otherwise, the following line sets YYVAL to garbage.
+     This behavior is undocumented and Bison
+     users should not rely upon it.  Assigning to YYVAL
+     unconditionally makes the parser a bit smaller, and it avoids a
+     GCC warning that YYVAL may be used uninitialized.  */
+  yyval = yyvsp[1-yylen];
+
+
+  YY_REDUCE_PRINT (yyn);
+  switch (yyn)
+    {
+        case 2:
+#line 177 "/usr/src/local/bash/bash-20080814/lib/intl/plural.y"
+    {
+	    if ((yyvsp[0].exp) == NULL)
+	      YYABORT;
+	    ((struct parse_args *) arg)->res = (yyvsp[0].exp);
+	  }
+    break;
+
+  case 3:
+#line 185 "/usr/src/local/bash/bash-20080814/lib/intl/plural.y"
+    {
+	    (yyval.exp) = new_exp_3 (qmop, (yyvsp[-4].exp), (yyvsp[-2].exp), (yyvsp[0].exp));
+	  }
+    break;
+
+  case 4:
+#line 189 "/usr/src/local/bash/bash-20080814/lib/intl/plural.y"
+    {
+	    (yyval.exp) = new_exp_2 (lor, (yyvsp[-2].exp), (yyvsp[0].exp));
+	  }
+    break;
+
+  case 5:
+#line 193 "/usr/src/local/bash/bash-20080814/lib/intl/plural.y"
+    {
+	    (yyval.exp) = new_exp_2 (land, (yyvsp[-2].exp), (yyvsp[0].exp));
+	  }
+    break;
+
+  case 6:
+#line 197 "/usr/src/local/bash/bash-20080814/lib/intl/plural.y"
+    {
+	    (yyval.exp) = new_exp_2 ((yyvsp[-1].op), (yyvsp[-2].exp), (yyvsp[0].exp));
+	  }
+    break;
+
+  case 7:
+#line 201 "/usr/src/local/bash/bash-20080814/lib/intl/plural.y"
+    {
+	    (yyval.exp) = new_exp_2 ((yyvsp[-1].op), (yyvsp[-2].exp), (yyvsp[0].exp));
+	  }
+    break;
+
+  case 8:
+#line 205 "/usr/src/local/bash/bash-20080814/lib/intl/plural.y"
+    {
+	    (yyval.exp) = new_exp_2 ((yyvsp[-1].op), (yyvsp[-2].exp), (yyvsp[0].exp));
+	  }
+    break;
+
+  case 9:
+#line 209 "/usr/src/local/bash/bash-20080814/lib/intl/plural.y"
+    {
+	    (yyval.exp) = new_exp_2 ((yyvsp[-1].op), (yyvsp[-2].exp), (yyvsp[0].exp));
+	  }
+    break;
+
+  case 10:
+#line 213 "/usr/src/local/bash/bash-20080814/lib/intl/plural.y"
+    {
+	    (yyval.exp) = new_exp_1 (lnot, (yyvsp[0].exp));
+	  }
+    break;
+
+  case 11:
+#line 217 "/usr/src/local/bash/bash-20080814/lib/intl/plural.y"
+    {
+	    (yyval.exp) = new_exp_0 (var);
+	  }
+    break;
+
+  case 12:
+#line 221 "/usr/src/local/bash/bash-20080814/lib/intl/plural.y"
+    {
+	    if (((yyval.exp) = new_exp_0 (num)) != NULL)
+	      (yyval.exp)->val.num = (yyvsp[0].num);
+	  }
+    break;
+
+  case 13:
+#line 226 "/usr/src/local/bash/bash-20080814/lib/intl/plural.y"
+    {
+	    (yyval.exp) = (yyvsp[-1].exp);
+	  }
+    break;
+
+
+    }
+
+/* Line 1037 of yacc.c.  */
+#line 1270 "/usr/src/local/bash/bash-20080814/lib/intl/plural.c"
+
+  yyvsp -= yylen;
+  yyssp -= yylen;
+
+
+  YY_STACK_PRINT (yyss, yyssp);
+
+  *++yyvsp = yyval;
+
+
+  /* Now `shift' the result of the reduction.  Determine what state
+     that goes to, based on the state we popped back to and the rule
+     number reduced by.  */
+
+  yyn = yyr1[yyn];
+
+  yystate = yypgoto[yyn - YYNTOKENS] + *yyssp;
+  if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp)
+    yystate = yytable[yystate];
+  else
+    yystate = yydefgoto[yyn - YYNTOKENS];
+
+  goto yynewstate;
+
+
+/*------------------------------------.
+| yyerrlab -- here on detecting error |
+`------------------------------------*/
+yyerrlab:
+  /* If not already recovering from an error, report this error.  */
+  if (!yyerrstatus)
+    {
+      ++yynerrs;
+#if YYERROR_VERBOSE
+      yyn = yypact[yystate];
+
+      if (YYPACT_NINF < yyn && yyn < YYLAST)
+	{
+	  YYSIZE_T yysize = 0;
+	  int yytype = YYTRANSLATE (yychar);
+	  const char* yyprefix;
+	  char *yymsg;
+	  int yyx;
+
+	  /* Start YYX at -YYN if negative to avoid negative indexes in
+	     YYCHECK.  */
+	  int yyxbegin = yyn < 0 ? -yyn : 0;
+
+	  /* Stay within bounds of both yycheck and yytname.  */
+	  int yychecklim = YYLAST - yyn;
+	  int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS;
+	  int yycount = 0;
+
+	  yyprefix = ", expecting ";
+	  for (yyx = yyxbegin; yyx < yyxend; ++yyx)
+	    if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR)
+	      {
+		yysize += yystrlen (yyprefix) + yystrlen (yytname [yyx]);
+		yycount += 1;
+		if (yycount == 5)
+		  {
+		    yysize = 0;
+		    break;
+		  }
+	      }
+	  yysize += (sizeof ("syntax error, unexpected ")
+		     + yystrlen (yytname[yytype]));
+	  yymsg = (char *) YYSTACK_ALLOC (yysize);
+	  if (yymsg != 0)
+	    {
+	      char *yyp = yystpcpy (yymsg, "syntax error, unexpected ");
+	      yyp = yystpcpy (yyp, yytname[yytype]);
+
+	      if (yycount < 5)
+		{
+		  yyprefix = ", expecting ";
+		  for (yyx = yyxbegin; yyx < yyxend; ++yyx)
+		    if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR)
+		      {
+			yyp = yystpcpy (yyp, yyprefix);
+			yyp = yystpcpy (yyp, yytname[yyx]);
+			yyprefix = " or ";
+		      }
+		}
+	      yyerror (yymsg);
+	      YYSTACK_FREE (yymsg);
+	    }
+	  else
+	    yyerror ("syntax error; also virtual memory exhausted");
+	}
+      else
+#endif /* YYERROR_VERBOSE */
+	yyerror ("syntax error");
+    }
+
+
+
+  if (yyerrstatus == 3)
+    {
+      /* If just tried and failed to reuse look-ahead token after an
+	 error, discard it.  */
+
+      if (yychar <= YYEOF)
+        {
+          /* If at end of input, pop the error token,
+	     then the rest of the stack, then return failure.  */
+	  if (yychar == YYEOF)
+	     for (;;)
+	       {
+
+		 YYPOPSTACK;
+		 if (yyssp == yyss)
+		   YYABORT;
+		 yydestruct ("Error: popping",
+                             yystos[*yyssp], yyvsp);
+	       }
+        }
+      else
+	{
+	  yydestruct ("Error: discarding", yytoken, &yylval);
+	  yychar = YYEMPTY;
+	}
+    }
+
+  /* Else will try to reuse look-ahead token after shifting the error
+     token.  */
+  goto yyerrlab1;
+
+
+/*---------------------------------------------------.
+| yyerrorlab -- error raised explicitly by YYERROR.  |
+`---------------------------------------------------*/
+yyerrorlab:
+
+#ifdef __GNUC__
+  /* Pacify GCC when the user code never invokes YYERROR and the label
+     yyerrorlab therefore never appears in user code.  */
+  if (0)
+     goto yyerrorlab;
+#endif
+
+yyvsp -= yylen;
+  yyssp -= yylen;
+  yystate = *yyssp;
+  goto yyerrlab1;
+
+
+/*-------------------------------------------------------------.
+| yyerrlab1 -- common code for both syntax error and YYERROR.  |
+`-------------------------------------------------------------*/
+yyerrlab1:
+  yyerrstatus = 3;	/* Each real token shifted decrements this.  */
+
+  for (;;)
+    {
+      yyn = yypact[yystate];
+      if (yyn != YYPACT_NINF)
+	{
+	  yyn += YYTERROR;
+	  if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR)
+	    {
+	      yyn = yytable[yyn];
+	      if (0 < yyn)
+		break;
+	    }
+	}
+
+      /* Pop the current state because it cannot handle the error token.  */
+      if (yyssp == yyss)
+	YYABORT;
+
+
+      yydestruct ("Error: popping", yystos[yystate], yyvsp);
+      YYPOPSTACK;
+      yystate = *yyssp;
+      YY_STACK_PRINT (yyss, yyssp);
+    }
+
+  if (yyn == YYFINAL)
+    YYACCEPT;
+
+  *++yyvsp = yylval;
+
+
+  /* Shift the error token. */
+  YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp);
+
+  yystate = yyn;
+  goto yynewstate;
+
+
+/*-------------------------------------.
+| yyacceptlab -- YYACCEPT comes here.  |
+`-------------------------------------*/
+yyacceptlab:
+  yyresult = 0;
+  goto yyreturn;
+
+/*-----------------------------------.
+| yyabortlab -- YYABORT comes here.  |
+`-----------------------------------*/
+yyabortlab:
+  yydestruct ("Error: discarding lookahead",
+              yytoken, &yylval);
+  yychar = YYEMPTY;
+  yyresult = 1;
+  goto yyreturn;
+
+#ifndef yyoverflow
+/*----------------------------------------------.
+| yyoverflowlab -- parser overflow comes here.  |
+`----------------------------------------------*/
+yyoverflowlab:
+  yyerror ("parser stack overflow");
+  yyresult = 2;
+  /* Fall through.  */
+#endif
+
+yyreturn:
+#ifndef yyoverflow
+  if (yyss != yyssa)
+    YYSTACK_FREE (yyss);
+#endif
+  return yyresult;
+}
+
+
+#line 231 "/usr/src/local/bash/bash-20080814/lib/intl/plural.y"
+
+
+void
+internal_function
+FREE_EXPRESSION (exp)
+     struct expression *exp;
+{
+  if (exp == NULL)
+    return;
+
+  /* Handle the recursive case.  */
+  switch (exp->nargs)
+    {
+    case 3:
+      FREE_EXPRESSION (exp->val.args[2]);
+      /* FALLTHROUGH */
+    case 2:
+      FREE_EXPRESSION (exp->val.args[1]);
+      /* FALLTHROUGH */
+    case 1:
+      FREE_EXPRESSION (exp->val.args[0]);
+      /* FALLTHROUGH */
+    default:
+      break;
+    }
+
+  free (exp);
+}
+
+
+static int
+yylex (lval, pexp)
+     YYSTYPE *lval;
+     const char **pexp;
+{
+  const char *exp = *pexp;
+  int result;
+
+  while (1)
+    {
+      if (exp[0] == '\0')
+	{
+	  *pexp = exp;
+	  return YYEOF;
+	}
+
+      if (exp[0] != ' ' && exp[0] != '\t')
+	break;
+
+      ++exp;
+    }
+
+  result = *exp++;
+  switch (result)
+    {
+    case '0': case '1': case '2': case '3': case '4':
+    case '5': case '6': case '7': case '8': case '9':
+      {
+	unsigned long int n = result - '0';
+	while (exp[0] >= '0' && exp[0] <= '9')
+	  {
+	    n *= 10;
+	    n += exp[0] - '0';
+	    ++exp;
+	  }
+	lval->num = n;
+	result = NUMBER;
+      }
+      break;
+
+    case '=':
+      if (exp[0] == '=')
+	{
+	  ++exp;
+	  lval->op = equal;
+	  result = EQUOP2;
+	}
+      else
+	result = YYERRCODE;
+      break;
+
+    case '!':
+      if (exp[0] == '=')
+	{
+	  ++exp;
+	  lval->op = not_equal;
+	  result = EQUOP2;
+	}
+      break;
+
+    case '&':
+    case '|':
+      if (exp[0] == result)
+	++exp;
+      else
+	result = YYERRCODE;
+      break;
+
+    case '<':
+      if (exp[0] == '=')
+	{
+	  ++exp;
+	  lval->op = less_or_equal;
+	}
+      else
+	lval->op = less_than;
+      result = CMPOP2;
+      break;
+
+    case '>':
+      if (exp[0] == '=')
+	{
+	  ++exp;
+	  lval->op = greater_or_equal;
+	}
+      else
+	lval->op = greater_than;
+      result = CMPOP2;
+      break;
+
+    case '*':
+      lval->op = mult;
+      result = MULOP2;
+      break;
+
+    case '/':
+      lval->op = divide;
+      result = MULOP2;
+      break;
+
+    case '%':
+      lval->op = module;
+      result = MULOP2;
+      break;
+
+    case '+':
+      lval->op = plus;
+      result = ADDOP2;
+      break;
+
+    case '-':
+      lval->op = minus;
+      result = ADDOP2;
+      break;
+
+    case 'n':
+    case '?':
+    case ':':
+    case '(':
+    case ')':
+      /* Nothing, just return the character.  */
+      break;
+
+    case ';':
+    case '\n':
+    case '\0':
+      /* Be safe and let the user call this function again.  */
+      --exp;
+      result = YYEOF;
+      break;
+
+    default:
+      result = YYERRCODE;
+#if YYDEBUG != 0
+      --exp;
+#endif
+      break;
+    }
+
+  *pexp = exp;
+
+  return result;
+}
+
+
+static void
+yyerror (str)
+     const char *str;
+{
+  /* Do nothing.  We don't print error messages here.  */
+}
diff --git a/lib/intl/plural.y b/lib/intl/plural.y
new file mode 100644
index 0000000..8b8cec7
--- /dev/null
+++ b/lib/intl/plural.y
@@ -0,0 +1,411 @@
+%{
+/* plural.y - Expression parsing for plural form selection. */
+
+/* Copyright (C) 2000, 2001, 2005-2009 Free Software Foundation, Inc.
+   Written by Ulrich Drepper <drepper@cygnus.com>, 2000.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* The bison generated parser uses alloca.  AIX 3 forces us to put this
+   declaration at the beginning of the file.  The declaration in bison's
+   skeleton file comes too late.  This must come before <config.h>
+   because <config.h> may include arbitrary system headers.  */
+#if defined _AIX && !defined __GNUC__
+ #pragma alloca
+#endif
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include <stddef.h>
+#include <stdlib.h>
+#include "plural-exp.h"
+
+/* The main function generated by the parser is called __gettextparse,
+   but we want it to be called PLURAL_PARSE.  */
+#ifndef _LIBC
+# define __gettextparse PLURAL_PARSE
+#endif
+
+#define YYLEX_PARAM	&((struct parse_args *) arg)->cp
+#define YYPARSE_PARAM	arg
+%}
+%pure_parser
+%expect 7
+
+%union {
+  unsigned long int num;
+  enum operator op;
+  struct expression *exp;
+}
+
+%{
+/* Prototypes for local functions.  */
+static struct expression *new_exp PARAMS ((int nargs, enum operator op,
+					   struct expression * const *args));
+static inline struct expression *new_exp_0 PARAMS ((enum operator op));
+static inline struct expression *new_exp_1 PARAMS ((enum operator op,
+						   struct expression *right));
+static struct expression *new_exp_2 PARAMS ((enum operator op,
+					     struct expression *left,
+					     struct expression *right));
+static inline struct expression *new_exp_3 PARAMS ((enum operator op,
+						   struct expression *bexp,
+						   struct expression *tbranch,
+						   struct expression *fbranch));
+static int yylex PARAMS ((YYSTYPE *lval, const char **pexp));
+static void yyerror PARAMS ((const char *str));
+
+/* Allocation of expressions.  */
+
+static struct expression *
+new_exp (nargs, op, args)
+     int nargs;
+     enum operator op;
+     struct expression * const *args;
+{
+  int i;
+  struct expression *newp;
+
+  /* If any of the argument could not be malloc'ed, just return NULL.  */
+  for (i = nargs - 1; i >= 0; i--)
+    if (args[i] == NULL)
+      goto fail;
+
+  /* Allocate a new expression.  */
+  newp = (struct expression *) malloc (sizeof (*newp));
+  if (newp != NULL)
+    {
+      newp->nargs = nargs;
+      newp->operation = op;
+      for (i = nargs - 1; i >= 0; i--)
+	newp->val.args[i] = args[i];
+      return newp;
+    }
+
+ fail:
+  for (i = nargs - 1; i >= 0; i--)
+    FREE_EXPRESSION (args[i]);
+
+  return NULL;
+}
+
+static inline struct expression *
+new_exp_0 (op)
+     enum operator op;
+{
+  return new_exp (0, op, NULL);
+}
+
+static inline struct expression *
+new_exp_1 (op, right)
+     enum operator op;
+     struct expression *right;
+{
+  struct expression *args[1];
+
+  args[0] = right;
+  return new_exp (1, op, args);
+}
+
+static struct expression *
+new_exp_2 (op, left, right)
+     enum operator op;
+     struct expression *left;
+     struct expression *right;
+{
+  struct expression *args[2];
+
+  args[0] = left;
+  args[1] = right;
+  return new_exp (2, op, args);
+}
+
+static inline struct expression *
+new_exp_3 (op, bexp, tbranch, fbranch)
+     enum operator op;
+     struct expression *bexp;
+     struct expression *tbranch;
+     struct expression *fbranch;
+{
+  struct expression *args[3];
+
+  args[0] = bexp;
+  args[1] = tbranch;
+  args[2] = fbranch;
+  return new_exp (3, op, args);
+}
+
+%}
+
+/* This declares that all operators have the same associativity and the
+   precedence order as in C.  See [Harbison, Steele: C, A Reference Manual].
+   There is no unary minus and no bitwise operators.
+   Operators with the same syntactic behaviour have been merged into a single
+   token, to save space in the array generated by bison.  */
+%right '?'		/*   ?		*/
+%left '|'		/*   ||		*/
+%left '&'		/*   &&		*/
+%left EQUOP2		/*   == !=	*/
+%left CMPOP2		/*   < > <= >=	*/
+%left ADDOP2		/*   + -	*/
+%left MULOP2		/*   * / %	*/
+%right '!'		/*   !		*/
+
+%token <op> EQUOP2 CMPOP2 ADDOP2 MULOP2
+%token <num> NUMBER
+%type <exp> exp
+
+%%
+
+start:	  exp
+	  {
+	    if ($1 == NULL)
+	      YYABORT;
+	    ((struct parse_args *) arg)->res = $1;
+	  }
+	;
+
+exp:	  exp '?' exp ':' exp
+	  {
+	    $$ = new_exp_3 (qmop, $1, $3, $5);
+	  }
+	| exp '|' exp
+	  {
+	    $$ = new_exp_2 (lor, $1, $3);
+	  }
+	| exp '&' exp
+	  {
+	    $$ = new_exp_2 (land, $1, $3);
+	  }
+	| exp EQUOP2 exp
+	  {
+	    $$ = new_exp_2 ($2, $1, $3);
+	  }
+	| exp CMPOP2 exp
+	  {
+	    $$ = new_exp_2 ($2, $1, $3);
+	  }
+	| exp ADDOP2 exp
+	  {
+	    $$ = new_exp_2 ($2, $1, $3);
+	  }
+	| exp MULOP2 exp
+	  {
+	    $$ = new_exp_2 ($2, $1, $3);
+	  }
+	| '!' exp
+	  {
+	    $$ = new_exp_1 (lnot, $2);
+	  }
+	| 'n'
+	  {
+	    $$ = new_exp_0 (var);
+	  }
+	| NUMBER
+	  {
+	    if (($$ = new_exp_0 (num)) != NULL)
+	      $$->val.num = $1;
+	  }
+	| '(' exp ')'
+	  {
+	    $$ = $2;
+	  }
+	;
+
+%%
+
+void
+internal_function
+FREE_EXPRESSION (exp)
+     struct expression *exp;
+{
+  if (exp == NULL)
+    return;
+
+  /* Handle the recursive case.  */
+  switch (exp->nargs)
+    {
+    case 3:
+      FREE_EXPRESSION (exp->val.args[2]);
+      /* FALLTHROUGH */
+    case 2:
+      FREE_EXPRESSION (exp->val.args[1]);
+      /* FALLTHROUGH */
+    case 1:
+      FREE_EXPRESSION (exp->val.args[0]);
+      /* FALLTHROUGH */
+    default:
+      break;
+    }
+
+  free (exp);
+}
+
+
+static int
+yylex (lval, pexp)
+     YYSTYPE *lval;
+     const char **pexp;
+{
+  const char *exp = *pexp;
+  int result;
+
+  while (1)
+    {
+      if (exp[0] == '\0')
+	{
+	  *pexp = exp;
+	  return YYEOF;
+	}
+
+      if (exp[0] != ' ' && exp[0] != '\t')
+	break;
+
+      ++exp;
+    }
+
+  result = *exp++;
+  switch (result)
+    {
+    case '0': case '1': case '2': case '3': case '4':
+    case '5': case '6': case '7': case '8': case '9':
+      {
+	unsigned long int n = result - '0';
+	while (exp[0] >= '0' && exp[0] <= '9')
+	  {
+	    n *= 10;
+	    n += exp[0] - '0';
+	    ++exp;
+	  }
+	lval->num = n;
+	result = NUMBER;
+      }
+      break;
+
+    case '=':
+      if (exp[0] == '=')
+	{
+	  ++exp;
+	  lval->op = equal;
+	  result = EQUOP2;
+	}
+      else
+	result = YYERRCODE;
+      break;
+
+    case '!':
+      if (exp[0] == '=')
+	{
+	  ++exp;
+	  lval->op = not_equal;
+	  result = EQUOP2;
+	}
+      break;
+
+    case '&':
+    case '|':
+      if (exp[0] == result)
+	++exp;
+      else
+	result = YYERRCODE;
+      break;
+
+    case '<':
+      if (exp[0] == '=')
+	{
+	  ++exp;
+	  lval->op = less_or_equal;
+	}
+      else
+	lval->op = less_than;
+      result = CMPOP2;
+      break;
+
+    case '>':
+      if (exp[0] == '=')
+	{
+	  ++exp;
+	  lval->op = greater_or_equal;
+	}
+      else
+	lval->op = greater_than;
+      result = CMPOP2;
+      break;
+
+    case '*':
+      lval->op = mult;
+      result = MULOP2;
+      break;
+
+    case '/':
+      lval->op = divide;
+      result = MULOP2;
+      break;
+
+    case '%':
+      lval->op = module;
+      result = MULOP2;
+      break;
+
+    case '+':
+      lval->op = plus;
+      result = ADDOP2;
+      break;
+
+    case '-':
+      lval->op = minus;
+      result = ADDOP2;
+      break;
+
+    case 'n':
+    case '?':
+    case ':':
+    case '(':
+    case ')':
+      /* Nothing, just return the character.  */
+      break;
+
+    case ';':
+    case '\n':
+    case '\0':
+      /* Be safe and let the user call this function again.  */
+      --exp;
+      result = YYEOF;
+      break;
+
+    default:
+      result = YYERRCODE;
+#if YYDEBUG != 0
+      --exp;
+#endif
+      break;
+    }
+
+  *pexp = exp;
+
+  return result;
+}
+
+
+static void
+yyerror (str)
+     const char *str;
+{
+  /* Do nothing.  We don't print error messages here.  */
+}
diff --git a/lib/intl/ref-add.sin b/lib/intl/ref-add.sin
new file mode 100755
index 0000000..6fd32ed
--- /dev/null
+++ b/lib/intl/ref-add.sin
@@ -0,0 +1,29 @@
+# Add this package to a list of references stored in a text file.
+#
+#   Copyright (C) 2000 Free Software Foundation, Inc.
+#
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# Written by Bruno Haible <haible@clisp.cons.org>.
+#
+/^# Packages using this file: / {
+  s/# Packages using this file://
+  ta
+  :a
+  s/ @PACKAGE@ / @PACKAGE@ /
+  tb
+  s/ $/ @PACKAGE@ /
+  :b
+  s/^/# Packages using this file:/
+}
diff --git a/lib/intl/ref-del.sin b/lib/intl/ref-del.sin
new file mode 100755
index 0000000..65ce9af
--- /dev/null
+++ b/lib/intl/ref-del.sin
@@ -0,0 +1,24 @@
+# Remove this package from a list of references stored in a text file.
+#
+#   Copyright (C) 2000 Free Software Foundation, Inc.
+#
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# Written by Bruno Haible <haible@clisp.cons.org>.
+#
+/^# Packages using this file: / {
+  s/# Packages using this file://
+  s/ @PACKAGE@ / /
+  s/^/# Packages using this file:/
+}
diff --git a/lib/intl/relocatable.c b/lib/intl/relocatable.c
new file mode 100644
index 0000000..34b2b18
--- /dev/null
+++ b/lib/intl/relocatable.c
@@ -0,0 +1,440 @@
+/* relocatable.c - Provide relocatable packages. */
+
+/* Copyright (C) 2003, 2005-2009 Free Software Foundation, Inc.
+   Written by Bruno Haible <bruno@clisp.org>, 2003.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* Tell glibc's <stdio.h> to provide a prototype for getline().
+   This must come before <config.h> because <config.h> may include
+   <features.h>, and once <features.h> has been included, it's too late.  */
+#ifndef _GNU_SOURCE
+# define _GNU_SOURCE	1
+#endif
+
+#ifdef HAVE_CONFIG_H
+# include "config.h"
+#endif
+
+/* Specification.  */
+#include "relocatable.h"
+
+#if ENABLE_RELOCATABLE
+
+#include <stddef.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#ifdef NO_XMALLOC
+# define xmalloc malloc
+#else
+# include "xmalloc.h"
+#endif
+
+#if DEPENDS_ON_LIBCHARSET
+# include <libcharset.h>
+#endif
+#if DEPENDS_ON_LIBICONV && HAVE_ICONV
+# include <iconv.h>
+#endif
+#if DEPENDS_ON_LIBINTL && ENABLE_NLS
+# include <libintl.h>
+#endif
+
+/* Faked cheap 'bool'.  */
+#undef bool
+#undef false
+#undef true
+#define bool int
+#define false 0
+#define true 1
+
+/* Pathname support.
+   ISSLASH(C)           tests whether C is a directory separator character.
+   IS_PATH_WITH_DIR(P)  tests whether P contains a directory specification.
+ */
+#if defined _WIN32 || defined __WIN32__ || defined __EMX__ || defined __DJGPP__
+  /* Win32, OS/2, DOS */
+# define ISSLASH(C) ((C) == '/' || (C) == '\\')
+# define HAS_DEVICE(P) \
+    ((((P)[0] >= 'A' && (P)[0] <= 'Z') || ((P)[0] >= 'a' && (P)[0] <= 'z')) \
+     && (P)[1] == ':')
+# define IS_PATH_WITH_DIR(P) \
+    (strchr (P, '/') != NULL || strchr (P, '\\') != NULL || HAS_DEVICE (P))
+# define FILESYSTEM_PREFIX_LEN(P) (HAS_DEVICE (P) ? 2 : 0)
+#else
+  /* Unix */
+# define ISSLASH(C) ((C) == '/')
+# define IS_PATH_WITH_DIR(P) (strchr (P, '/') != NULL)
+# define FILESYSTEM_PREFIX_LEN(P) 0
+#endif
+
+/* Original installation prefix.  */
+static char *orig_prefix;
+static size_t orig_prefix_len;
+/* Current installation prefix.  */
+static char *curr_prefix;
+static size_t curr_prefix_len;
+/* These prefixes do not end in a slash.  Anything that will be concatenated
+   to them must start with a slash.  */
+
+/* Sets the original and the current installation prefix of this module.
+   Relocation simply replaces a pathname starting with the original prefix
+   by the corresponding pathname with the current prefix instead.  Both
+   prefixes should be directory names without trailing slash (i.e. use ""
+   instead of "/").  */
+static void
+set_this_relocation_prefix (const char *orig_prefix_arg,
+			    const char *curr_prefix_arg)
+{
+  if (orig_prefix_arg != NULL && curr_prefix_arg != NULL
+      /* Optimization: if orig_prefix and curr_prefix are equal, the
+	 relocation is a nop.  */
+      && strcmp (orig_prefix_arg, curr_prefix_arg) != 0)
+    {
+      /* Duplicate the argument strings.  */
+      char *memory;
+
+      orig_prefix_len = strlen (orig_prefix_arg);
+      curr_prefix_len = strlen (curr_prefix_arg);
+      memory = (char *) xmalloc (orig_prefix_len + 1 + curr_prefix_len + 1);
+#ifdef NO_XMALLOC
+      if (memory != NULL)
+#endif
+	{
+	  memcpy (memory, orig_prefix_arg, orig_prefix_len + 1);
+	  orig_prefix = memory;
+	  memory += orig_prefix_len + 1;
+	  memcpy (memory, curr_prefix_arg, curr_prefix_len + 1);
+	  curr_prefix = memory;
+	  return;
+	}
+    }
+  orig_prefix = NULL;
+  curr_prefix = NULL;
+  /* Don't worry about wasted memory here - this function is usually only
+     called once.  */
+}
+
+/* Sets the original and the current installation prefix of the package.
+   Relocation simply replaces a pathname starting with the original prefix
+   by the corresponding pathname with the current prefix instead.  Both
+   prefixes should be directory names without trailing slash (i.e. use ""
+   instead of "/").  */
+void
+set_relocation_prefix (const char *orig_prefix_arg, const char *curr_prefix_arg)
+{
+  set_this_relocation_prefix (orig_prefix_arg, curr_prefix_arg);
+
+  /* Now notify all dependent libraries.  */
+#if DEPENDS_ON_LIBCHARSET
+  libcharset_set_relocation_prefix (orig_prefix_arg, curr_prefix_arg);
+#endif
+#if DEPENDS_ON_LIBICONV && HAVE_ICONV && _LIBICONV_VERSION >= 0x0109
+  libiconv_set_relocation_prefix (orig_prefix_arg, curr_prefix_arg);
+#endif
+#if DEPENDS_ON_LIBINTL && ENABLE_NLS && defined libintl_set_relocation_prefix
+  libintl_set_relocation_prefix (orig_prefix_arg, curr_prefix_arg);
+#endif
+}
+
+/* Convenience function:
+   Computes the current installation prefix, based on the original
+   installation prefix, the original installation directory of a particular
+   file, and the current pathname of this file.  Returns NULL upon failure.  */
+#ifdef IN_LIBRARY
+#define compute_curr_prefix local_compute_curr_prefix
+static
+#endif
+const char *
+compute_curr_prefix (const char *orig_installprefix,
+		     const char *orig_installdir,
+		     const char *curr_pathname)
+{
+  const char *curr_installdir;
+  const char *rel_installdir;
+
+  if (curr_pathname == NULL)
+    return NULL;
+
+  /* Determine the relative installation directory, relative to the prefix.
+     This is simply the difference between orig_installprefix and
+     orig_installdir.  */
+  if (strncmp (orig_installprefix, orig_installdir, strlen (orig_installprefix))
+      != 0)
+    /* Shouldn't happen - nothing should be installed outside $(prefix).  */
+    return NULL;
+  rel_installdir = orig_installdir + strlen (orig_installprefix);
+
+  /* Determine the current installation directory.  */
+  {
+    const char *p_base = curr_pathname + FILESYSTEM_PREFIX_LEN (curr_pathname);
+    const char *p = curr_pathname + strlen (curr_pathname);
+    char *q;
+
+    while (p > p_base)
+      {
+	p--;
+	if (ISSLASH (*p))
+	  break;
+      }
+
+    q = (char *) xmalloc (p - curr_pathname + 1);
+#ifdef NO_XMALLOC
+    if (q == NULL)
+      return NULL;
+#endif
+    memcpy (q, curr_pathname, p - curr_pathname);
+    q[p - curr_pathname] = '\0';
+    curr_installdir = q;
+  }
+
+  /* Compute the current installation prefix by removing the trailing
+     rel_installdir from it.  */
+  {
+    const char *rp = rel_installdir + strlen (rel_installdir);
+    const char *cp = curr_installdir + strlen (curr_installdir);
+    const char *cp_base =
+      curr_installdir + FILESYSTEM_PREFIX_LEN (curr_installdir);
+
+    while (rp > rel_installdir && cp > cp_base)
+      {
+	bool same = false;
+	const char *rpi = rp;
+	const char *cpi = cp;
+
+	while (rpi > rel_installdir && cpi > cp_base)
+	  {
+	    rpi--;
+	    cpi--;
+	    if (ISSLASH (*rpi) || ISSLASH (*cpi))
+	      {
+		if (ISSLASH (*rpi) && ISSLASH (*cpi))
+		  same = true;
+		break;
+	      }
+#if defined _WIN32 || defined __WIN32__ || defined __EMX__ || defined __DJGPP__
+	    /* Win32, OS/2, DOS - case insignificant filesystem */
+	    if ((*rpi >= 'a' && *rpi <= 'z' ? *rpi - 'a' + 'A' : *rpi)
+		!= (*cpi >= 'a' && *cpi <= 'z' ? *cpi - 'a' + 'A' : *cpi))
+	      break;
+#else
+	    if (*rpi != *cpi)
+	      break;
+#endif
+	  }
+	if (!same)
+	  break;
+	/* The last pathname component was the same.  opi and cpi now point
+	   to the slash before it.  */
+	rp = rpi;
+	cp = cpi;
+      }
+
+    if (rp > rel_installdir)
+      /* Unexpected: The curr_installdir does not end with rel_installdir.  */
+      return NULL;
+
+    {
+      size_t curr_prefix_len = cp - curr_installdir;
+      char *curr_prefix;
+
+      curr_prefix = (char *) xmalloc (curr_prefix_len + 1);
+#ifdef NO_XMALLOC
+      if (curr_prefix == NULL)
+	return NULL;
+#endif
+      memcpy (curr_prefix, curr_installdir, curr_prefix_len);
+      curr_prefix[curr_prefix_len] = '\0';
+
+      return curr_prefix;
+    }
+  }
+}
+
+#if defined PIC && defined INSTALLDIR
+
+/* Full pathname of shared library, or NULL.  */
+static char *shared_library_fullname;
+
+#if defined _WIN32 || defined __WIN32__
+
+/* Determine the full pathname of the shared library when it is loaded.  */
+
+BOOL WINAPI
+DllMain (HINSTANCE module_handle, DWORD event, LPVOID reserved)
+{
+  (void) reserved;
+
+  if (event == DLL_PROCESS_ATTACH)
+    {
+      /* The DLL is being loaded into an application's address range.  */
+      static char location[MAX_PATH];
+
+      if (!GetModuleFileName (module_handle, location, sizeof (location)))
+	/* Shouldn't happen.  */
+	return FALSE;
+
+      if (!IS_PATH_WITH_DIR (location))
+	/* Shouldn't happen.  */
+	return FALSE;
+
+      shared_library_fullname = strdup (location);
+    }
+
+  return TRUE;
+}
+
+#else /* Unix */
+
+static void
+find_shared_library_fullname ()
+{
+#ifdef __linux__
+  FILE *fp;
+
+  /* Open the current process' maps file.  It describes one VMA per line.  */
+  fp = fopen ("/proc/self/maps", "r");
+  if (fp)
+    {
+      unsigned long address = (unsigned long) &find_shared_library_fullname;
+      for (;;)
+	{
+	  unsigned long start, end;
+	  int c;
+
+	  if (fscanf (fp, "%lx-%lx", &start, &end) != 2)
+	    break;
+	  if (address >= start && address <= end - 1)
+	    {
+	      /* Found it.  Now see if this line contains a filename.  */
+	      while (c = getc (fp), c != EOF && c != '\n' && c != '/')
+		continue;
+	      if (c == '/')
+		{
+		  size_t size;
+		  int len;
+
+		  ungetc (c, fp);
+		  shared_library_fullname = NULL; size = 0;
+		  len = getline (&shared_library_fullname, &size, fp);
+		  if (len >= 0)
+		    {
+		      /* Success: filled shared_library_fullname.  */
+		      if (len > 0 && shared_library_fullname[len - 1] == '\n')
+			shared_library_fullname[len - 1] = '\0';
+		    }
+		}
+	      break;
+	    }
+	  while (c = getc (fp), c != EOF && c != '\n')
+	    continue;
+	}
+      fclose (fp);
+    }
+#endif
+}
+
+#endif /* WIN32 / Unix */
+
+/* Return the full pathname of the current shared library.
+   Return NULL if unknown.
+   Guaranteed to work only on Linux and Woe32.  */
+static char *
+get_shared_library_fullname ()
+{
+#if !(defined _WIN32 || defined __WIN32__)
+  static bool tried_find_shared_library_fullname;
+  if (!tried_find_shared_library_fullname)
+    {
+      find_shared_library_fullname ();
+      tried_find_shared_library_fullname = true;
+    }
+#endif
+  return shared_library_fullname;
+}
+
+#endif /* PIC */
+
+/* Returns the pathname, relocated according to the current installation
+   directory.  */
+const char *
+relocate (const char *pathname)
+{
+#if defined PIC && defined INSTALLDIR
+  static int initialized;
+
+  /* Initialization code for a shared library.  */
+  if (!initialized)
+    {
+      /* At this point, orig_prefix and curr_prefix likely have already been
+	 set through the main program's set_program_name_and_installdir
+	 function.  This is sufficient in the case that the library has
+	 initially been installed in the same orig_prefix.  But we can do
+	 better, to also cover the cases that 1. it has been installed
+	 in a different prefix before being moved to orig_prefix and (later)
+	 to curr_prefix, 2. unlike the program, it has not moved away from
+	 orig_prefix.  */
+      const char *orig_installprefix = INSTALLPREFIX;
+      const char *orig_installdir = INSTALLDIR;
+      const char *curr_prefix_better;
+
+      curr_prefix_better =
+	compute_curr_prefix (orig_installprefix, orig_installdir,
+			     get_shared_library_fullname ());
+      if (curr_prefix_better == NULL)
+	curr_prefix_better = curr_prefix;
+
+      set_relocation_prefix (orig_installprefix, curr_prefix_better);
+
+      initialized = 1;
+    }
+#endif
+
+  /* Note: It is not necessary to perform case insensitive comparison here,
+     even for DOS-like filesystems, because the pathname argument was
+     typically created from the same Makefile variable as orig_prefix came
+     from.  */
+  if (orig_prefix != NULL && curr_prefix != NULL
+      && strncmp (pathname, orig_prefix, orig_prefix_len) == 0)
+    {
+      if (pathname[orig_prefix_len] == '\0')
+	/* pathname equals orig_prefix.  */
+	return curr_prefix;
+      if (ISSLASH (pathname[orig_prefix_len]))
+	{
+	  /* pathname starts with orig_prefix.  */
+	  const char *pathname_tail = &pathname[orig_prefix_len];
+	  char *result =
+	    (char *) xmalloc (curr_prefix_len + strlen (pathname_tail) + 1);
+
+#ifdef NO_XMALLOC
+	  if (result != NULL)
+#endif
+	    {
+	      memcpy (result, curr_prefix, curr_prefix_len);
+	      strcpy (result + curr_prefix_len, pathname_tail);
+	      return result;
+	    }
+	}
+    }
+  /* Nothing to relocate.  */
+  return pathname;
+}
+
+#endif
diff --git a/lib/intl/relocatable.h b/lib/intl/relocatable.h
new file mode 100644
index 0000000..de57f44
--- /dev/null
+++ b/lib/intl/relocatable.h
@@ -0,0 +1,69 @@
+/* relocatable.h - Provide relocatable packages. */
+
+/* Copyright (C) 2003, 2005-2009 Free Software Foundation, Inc.
+   Written by Bruno Haible <bruno@clisp.org>, 2003.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _RELOCATABLE_H
+#define _RELOCATABLE_H
+
+/* This can be enabled through the configure --enable-relocatable option.  */
+#if ENABLE_RELOCATABLE
+
+/* When building a DLL, we must export some functions.  Note that because
+   this is a private .h file, we don't need to use __declspec(dllimport)
+   in any case.  */
+#if defined _MSC_VER && BUILDING_DLL
+# define RELOCATABLE_DLL_EXPORTED __declspec(dllexport)
+#else
+# define RELOCATABLE_DLL_EXPORTED
+#endif
+
+/* Sets the original and the current installation prefix of the package.
+   Relocation simply replaces a pathname starting with the original prefix
+   by the corresponding pathname with the current prefix instead.  Both
+   prefixes should be directory names without trailing slash (i.e. use ""
+   instead of "/").  */
+extern RELOCATABLE_DLL_EXPORTED void
+       set_relocation_prefix (const char *orig_prefix,
+			      const char *curr_prefix);
+
+/* Returns the pathname, relocated according to the current installation
+   directory.  */
+extern const char * relocate (const char *pathname);
+
+/* Memory management: relocate() leaks memory, because it has to construct
+   a fresh pathname.  If this is a problem because your program calls
+   relocate() frequently, think about caching the result.  */
+
+/* Convenience function:
+   Computes the current installation prefix, based on the original
+   installation prefix, the original installation directory of a particular
+   file, and the current pathname of this file.  Returns NULL upon failure.  */
+extern const char * compute_curr_prefix (const char *orig_installprefix,
+					 const char *orig_installdir,
+					 const char *curr_pathname);
+
+#else
+
+/* By default, we use the hardwired pathnames.  */
+#define relocate(pathname) (pathname)
+
+#endif
+
+#endif /* _RELOCATABLE_H */
diff --git a/lib/intl/textdomain.c b/lib/intl/textdomain.c
new file mode 100644
index 0000000..4bb0e80
--- /dev/null
+++ b/lib/intl/textdomain.c
@@ -0,0 +1,144 @@
+/* textdomain.c - Implementation of the textdomain(3) function. */
+
+/* Copyright (C) 1995-1998, 2000, 2001, 2002, 2005-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include <stdlib.h>
+#include <string.h>
+
+#ifdef _LIBC
+# include <libintl.h>
+#else
+# include "libgnuintl.h"
+#endif
+#include "gettextP.h"
+
+#ifdef _LIBC
+/* We have to handle multi-threaded applications.  */
+# include <bits/libc-lock.h>
+#else
+/* Provide dummy implementation if this is outside glibc.  */
+# define __libc_rwlock_define(CLASS, NAME)
+# define __libc_rwlock_wrlock(NAME)
+# define __libc_rwlock_unlock(NAME)
+#endif
+
+/* The internal variables in the standalone libintl.a must have different
+   names than the internal variables in GNU libc, otherwise programs
+   using libintl.a cannot be linked statically.  */
+#if !defined _LIBC
+# define _nl_default_default_domain libintl_nl_default_default_domain
+# define _nl_current_default_domain libintl_nl_current_default_domain
+#endif
+
+/* @@ end of prolog @@ */
+
+/* Name of the default text domain.  */
+extern const char _nl_default_default_domain[] attribute_hidden;
+
+/* Default text domain in which entries for gettext(3) are to be found.  */
+extern const char *_nl_current_default_domain attribute_hidden;
+
+
+/* Names for the libintl functions are a problem.  They must not clash
+   with existing names and they should follow ANSI C.  But this source
+   code is also used in GNU C Library where the names have a __
+   prefix.  So we have to make a difference here.  */
+#ifdef _LIBC
+# define TEXTDOMAIN __textdomain
+# ifndef strdup
+#  define strdup(str) __strdup (str)
+# endif
+#else
+# define TEXTDOMAIN libintl_textdomain
+#endif
+
+/* Lock variable to protect the global data in the gettext implementation.  */
+__libc_rwlock_define (extern, _nl_state_lock attribute_hidden)
+
+/* Set the current default message catalog to DOMAINNAME.
+   If DOMAINNAME is null, return the current default.
+   If DOMAINNAME is "", reset to the default of "messages".  */
+char *
+TEXTDOMAIN (domainname)
+     const char *domainname;
+{
+  char *new_domain;
+  char *old_domain;
+
+  /* A NULL pointer requests the current setting.  */
+  if (domainname == NULL)
+    return (char *) _nl_current_default_domain;
+
+  __libc_rwlock_wrlock (_nl_state_lock);
+
+  old_domain = (char *) _nl_current_default_domain;
+
+  /* If domain name is the null string set to default domain "messages".  */
+  if (domainname[0] == '\0'
+      || strcmp (domainname, _nl_default_default_domain) == 0)
+    {
+      _nl_current_default_domain = _nl_default_default_domain;
+      new_domain = (char *) _nl_current_default_domain;
+    }
+  else if (strcmp (domainname, old_domain) == 0)
+    /* This can happen and people will use it to signal that some
+       environment variable changed.  */
+    new_domain = old_domain;
+  else
+    {
+      /* If the following malloc fails `_nl_current_default_domain'
+	 will be NULL.  This value will be returned and so signals we
+	 are out of core.  */
+#if defined _LIBC || defined HAVE_STRDUP
+      new_domain = strdup (domainname);
+#else
+      size_t len = strlen (domainname) + 1;
+      new_domain = (char *) malloc (len);
+      if (new_domain != NULL)
+	memcpy (new_domain, domainname, len);
+#endif
+
+      if (new_domain != NULL)
+	_nl_current_default_domain = new_domain;
+    }
+
+  /* We use this possibility to signal a change of the loaded catalogs
+     since this is most likely the case and there is no other easy we
+     to do it.  Do it only when the call was successful.  */
+  if (new_domain != NULL)
+    {
+      ++_nl_msg_cat_cntr;
+
+      if (old_domain != new_domain && old_domain != _nl_default_default_domain)
+	free (old_domain);
+    }
+
+  __libc_rwlock_unlock (_nl_state_lock);
+
+  return new_domain;
+}
+
+#ifdef _LIBC
+/* Alias for function name in GNU C Library.  */
+weak_alias (__textdomain, textdomain);
+#endif
diff --git a/lib/malloc/Makefile.in b/lib/malloc/Makefile.in
new file mode 100644
index 0000000..0ef3cfd
--- /dev/null
+++ b/lib/malloc/Makefile.in
@@ -0,0 +1,138 @@
+# Skeleton Makefile for the GNU malloc code
+#
+# Copyright (C) 1996-2009 Free Software Foundation, Inc.
+
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+srcdir = @srcdir@
+VPATH = @srcdir@
+topdir = @top_srcdir@
+BUILD_DIR = @BUILD_DIR@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+
+CC = @CC@
+RANLIB = @RANLIB@
+AR = @AR@
+ARFLAGS = @ARFLAGS@
+RM = rm -f
+CP = cp
+MV = mv
+
+SHELL = @MAKE_SHELL@
+
+PROFILE_FLAGS = @PROFILE_FLAGS@
+
+CFLAGS = @CFLAGS@
+LOCAL_CFLAGS = @LOCAL_CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+
+DEFS = @DEFS@
+LOCAL_DEFS = @LOCAL_DEFS@
+
+LIBBUILD = ${BUILD_DIR}/lib
+
+BASHINCDIR = ${topdir}/include
+
+INTL_LIBSRC = ${topdir}/lib/intl
+INTL_BUILDDIR = ${LIBBUILD}/intl
+INTL_INC = @INTL_INC@
+LIBINTL_H = @LIBINTL_H@
+
+INCLUDES = -I. -I../.. -I$(topdir) -I$(BASHINCDIR) -I$(topdir)/lib $(INTL_INC)
+
+CCFLAGS = ${PROFILE_FLAGS} ${INCLUDES} $(DEFS) $(LOCAL_DEFS) $(LOCAL_CFLAGS) \
+	  $(CFLAGS) $(MALLOC_CFLAGS) $(CPPFLAGS)
+
+.c.o:
+	$(CC) $(CCFLAGS) -c $<
+
+.s.o:
+	$(CC) $(CCFLAGS) -c $<
+
+MALLOC_SOURCE = malloc.c
+STUB_SOURCE = stub.c
+
+ALLOCA_SOURCE = alloca.c
+ALLOCA_OBJECT = alloca.o
+
+MALLOC_SRC = @MALLOC_SRC@
+MALLOC = @MALLOC@
+ALLOCA = @ALLOCA@
+
+MALLOC_OBJS = malloc.o $(ALLOCA) trace.o stats.o table.o watch.o
+STUB_OBJS = $(ALLOCA) stub.o
+
+.PHONY:		malloc stubmalloc
+
+all:		malloc
+
+malloc: ${MALLOC_OBJS}
+	${RM} libmalloc.a
+	${AR} ${ARFLAGS} libmalloc.a ${MALLOC_OBJS}
+	-test -n "$(RANLIB)" && $(RANLIB) libmalloc.a
+
+stubmalloc: ${STUB_OBJS}
+	${RM} libmalloc.a
+	${AR} ${ARFLAGS} libmalloc.a ${STUB_OBJS}
+	-test -n "$(RANLIB)" && $(RANLIB) libmalloc.a
+
+alloca: ${ALLOCA}
+	${RM} libmalloc.a
+	${AR} ${ARFLAGS} libmalloc.a ${ALLOCA}
+	-test -n "$(RANLIB)" && $(RANLIB) libmalloc.a
+
+alloca.o:	$(srcdir)/$(ALLOCA_SOURCE)
+	$(CC) $(CCFLAGS) -c $(srcdir)/$(ALLOCA_SOURCE)
+	@- if test "$(ALLOCA_OBJECT)" != alloca.o ; then \
+		mv $(ALLOCA_OBJECT) alloca.o >/dev/null 2>&1 ; \
+	fi
+
+mostlyclean clean:
+	$(RM) *.o libmalloc.a
+
+distclean realclean maintainer-clean: clean
+	$(RM) Makefile
+
+alloca.o: $(BUILD_DIR)/config.h
+malloc.o: $(BUILD_DIR)/config.h $(topdir)/bashtypes.h getpagesize.h
+xmalloc.o: $(BUILD_DIR)/config.h $(BASHINCDIR)/ansi_stdlib.h
+trace.o: ${BUILD_DIR}/config.h
+stats.o: ${BUILD_DIR}/config.h
+table.o: ${BUILD_DIR}/config.h
+watch.o: ${BUILD_DIR}/config.h
+
+malloc.o: ${srcdir}/imalloc.h ${srcdir}/mstats.h
+malloc.o: ${srcdir}/table.h ${srcdir}/watch.h
+stats.o: ${srcdir}/imalloc.h ${srcdir}/mstats.h
+trace.o: ${srcdir}/imalloc.h
+table.o: ${srcdir}/imalloc.h ${srcdir}/table.h
+watch.o: ${srcdir}/imalloc.h ${srcdir}/watch.h
+
+malloc.o: ${topdir}/bashintl.h ${LIBINTL_H} ${BASHINCDIR}/gettext.h
+stats.o: ${topdir}/bashintl.h ${LIBINTL_H} ${BASHINCDIR}/gettext.h
+trace.o: ${topdir}/bashintl.h ${LIBINTL_H} ${BASHINCDIR}/gettext.h
+table.o: ${topdir}/bashintl.h ${LIBINTL_H} ${BASHINCDIR}/gettext.h
+watch.o: ${topdir}/bashintl.h ${LIBINTL_H} ${BASHINCDIR}/gettext.h
+
+# Rules for deficient makes, like SunOS and Solaris
+stub.o: stub.c
+malloc.o: malloc.c
+table.o: table.c
+trace.o: trace.c
+stats.o: stats.c
+watch.o: watch.c
diff --git a/lib/malloc/alloca.c b/lib/malloc/alloca.c
new file mode 100644
index 0000000..26319c2
--- /dev/null
+++ b/lib/malloc/alloca.c
@@ -0,0 +1,482 @@
+/* alloca.c -- allocate automatically reclaimed memory
+   (Mostly) portable public-domain implementation -- D A Gwyn
+
+   This implementation of the PWB library alloca function,
+   which is used to allocate space off the run-time stack so
+   that it is automatically reclaimed upon procedure exit,
+   was inspired by discussions with J. Q. Johnson of Cornell.
+   J.Otto Tennant <jot@cray.com> contributed the Cray support.
+
+   There are some preprocessor constants that can
+   be defined when compiling for your specific system, for
+   improved efficiency; however, the defaults should be okay.
+
+   The general concept of this implementation is to keep
+   track of all alloca-allocated blocks, and reclaim any
+   that are found to be deeper in the stack than the current
+   invocation.  This heuristic does not reclaim storage as
+   soon as it becomes invalid, but it will do so eventually.
+
+   As a special case, alloca(0) reclaims storage without
+   allocating any.  It is a good idea to use alloca(0) in
+   your main control loop, etc. to force garbage collection.  */
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+/* If compiling with GCC 2, this file's not needed.  */
+#if !defined (__GNUC__) || __GNUC__ < 2
+
+#include <bashtypes.h>		/* for size_t */
+
+/* If alloca is defined somewhere, this file is not needed. */
+#ifndef alloca
+
+#ifdef emacs
+#ifdef static
+/* actually, only want this if static is defined as ""
+   -- this is for usg, in which emacs must undefine static
+   in order to make unexec workable
+   */
+#ifndef STACK_DIRECTION
+you
+lose
+-- must know STACK_DIRECTION at compile-time
+#endif /* STACK_DIRECTION undefined */
+#endif /* static */
+#endif /* emacs */
+
+/* If your stack is a linked list of frames, you have to
+   provide an "address metric" ADDRESS_FUNCTION macro.  */
+
+#if defined (CRAY) && defined (CRAY_STACKSEG_END)
+long i00afunc ();
+#define ADDRESS_FUNCTION(arg) (char *) i00afunc (&(arg))
+#else
+#define ADDRESS_FUNCTION(arg) &(arg)
+#endif /* CRAY && CRAY_STACKSEG_END */
+
+#if __STDC__
+typedef void *pointer;
+#else
+typedef char *pointer;
+#endif
+
+#define	NULL	0
+
+/* Different portions of Emacs need to call different versions of
+   malloc.  The Emacs executable needs alloca to call xmalloc, because
+   ordinary malloc isn't protected from input signals.  On the other
+   hand, the utilities in lib-src need alloca to call malloc; some of
+   them are very simple, and don't have an xmalloc routine.
+
+   Non-Emacs programs expect this to call use xmalloc.
+
+   Callers below should use malloc.  */
+
+#ifndef emacs
+#define malloc xmalloc
+extern pointer xmalloc ();
+#endif
+
+/* Define STACK_DIRECTION if you know the direction of stack
+   growth for your system; otherwise it will be automatically
+   deduced at run-time.
+
+   STACK_DIRECTION > 0 => grows toward higher addresses
+   STACK_DIRECTION < 0 => grows toward lower addresses
+   STACK_DIRECTION = 0 => direction of growth unknown  */
+
+#ifndef STACK_DIRECTION
+#define	STACK_DIRECTION	0	/* Direction unknown.  */
+#endif
+
+#if STACK_DIRECTION != 0
+
+#define	STACK_DIR	STACK_DIRECTION	/* Known at compile-time.  */
+
+#else /* STACK_DIRECTION == 0; need run-time code.  */
+
+static int stack_dir;		/* 1 or -1 once known.  */
+#define	STACK_DIR	stack_dir
+
+static void
+find_stack_direction ()
+{
+  static char *addr = NULL;	/* Address of first `dummy', once known.  */
+  auto char dummy;		/* To get stack address.  */
+
+  if (addr == NULL)
+    {				/* Initial entry.  */
+      addr = ADDRESS_FUNCTION (dummy);
+
+      find_stack_direction ();	/* Recurse once.  */
+    }
+  else
+    {
+      /* Second entry.  */
+      if (ADDRESS_FUNCTION (dummy) > addr)
+	stack_dir = 1;		/* Stack grew upward.  */
+      else
+	stack_dir = -1;		/* Stack grew downward.  */
+    }
+}
+
+#endif /* STACK_DIRECTION == 0 */
+
+/* An "alloca header" is used to:
+   (a) chain together all alloca'ed blocks;
+   (b) keep track of stack depth.
+
+   It is very important that sizeof(header) agree with malloc
+   alignment chunk size.  The following default should work okay.  */
+
+#ifndef	ALIGN_SIZE
+#define	ALIGN_SIZE	sizeof(double)
+#endif
+
+typedef union hdr
+{
+  char align[ALIGN_SIZE];	/* To force sizeof(header).  */
+  struct
+    {
+      union hdr *next;		/* For chaining headers.  */
+      char *deep;		/* For stack depth measure.  */
+    } h;
+} header;
+
+static header *last_alloca_header = NULL;	/* -> last alloca header.  */
+
+/* Return a pointer to at least SIZE bytes of storage,
+   which will be automatically reclaimed upon exit from
+   the procedure that called alloca.  Originally, this space
+   was supposed to be taken from the current stack frame of the
+   caller, but that method cannot be made to work for some
+   implementations of C, for example under Gould's UTX/32.  */
+
+pointer
+alloca (size)
+     size_t size;
+{
+  auto char probe;		/* Probes stack depth: */
+  register char *depth = ADDRESS_FUNCTION (probe);
+
+#if STACK_DIRECTION == 0
+  if (STACK_DIR == 0)		/* Unknown growth direction.  */
+    find_stack_direction ();
+#endif
+
+  /* Reclaim garbage, defined as all alloca'd storage that
+     was allocated from deeper in the stack than currently. */
+
+  {
+    register header *hp;	/* Traverses linked list.  */
+
+    for (hp = last_alloca_header; hp != NULL;)
+      if ((STACK_DIR > 0 && hp->h.deep > depth)
+	  || (STACK_DIR < 0 && hp->h.deep < depth))
+	{
+	  register header *np = hp->h.next;
+
+	  free ((pointer) hp);	/* Collect garbage.  */
+
+	  hp = np;		/* -> next header.  */
+	}
+      else
+	break;			/* Rest are not deeper.  */
+
+    last_alloca_header = hp;	/* -> last valid storage.  */
+  }
+
+  if (size == 0)
+    return NULL;		/* No allocation required.  */
+
+  /* Allocate combined header + user data storage.  */
+
+  {
+    register pointer new = malloc (sizeof (header) + size);
+    /* Address of header.  */
+
+    ((header *) new)->h.next = last_alloca_header;
+    ((header *) new)->h.deep = depth;
+
+    last_alloca_header = (header *) new;
+
+    /* User storage begins just after header.  */
+
+    return (pointer) ((char *) new + sizeof (header));
+  }
+}
+
+#if defined (CRAY) && defined (CRAY_STACKSEG_END)
+
+#ifdef DEBUG_I00AFUNC
+#include <stdio.h>
+#endif
+
+#ifndef CRAY_STACK
+#define CRAY_STACK
+#ifndef CRAY2
+/* Stack structures for CRAY-1, CRAY X-MP, and CRAY Y-MP */
+struct stack_control_header
+  {
+    long shgrow:32;		/* Number of times stack has grown.  */
+    long shaseg:32;		/* Size of increments to stack.  */
+    long shhwm:32;		/* High water mark of stack.  */
+    long shsize:32;		/* Current size of stack (all segments).  */
+  };
+
+/* The stack segment linkage control information occurs at
+   the high-address end of a stack segment.  (The stack
+   grows from low addresses to high addresses.)  The initial
+   part of the stack segment linkage control information is
+   0200 (octal) words.  This provides for register storage
+   for the routine which overflows the stack.  */
+
+struct stack_segment_linkage
+  {
+    long ss[0200];		/* 0200 overflow words.  */
+    long sssize:32;		/* Number of words in this segment.  */
+    long ssbase:32;		/* Offset to stack base.  */
+    long:32;
+    long sspseg:32;		/* Offset to linkage control of previous
+				   segment of stack.  */
+    long:32;
+    long sstcpt:32;		/* Pointer to task common address block.  */
+    long sscsnm;		/* Private control structure number for
+				   microtasking.  */
+    long ssusr1;		/* Reserved for user.  */
+    long ssusr2;		/* Reserved for user.  */
+    long sstpid;		/* Process ID for pid based multi-tasking.  */
+    long ssgvup;		/* Pointer to multitasking thread giveup.  */
+    long sscray[7];		/* Reserved for Cray Research.  */
+    long ssa0;
+    long ssa1;
+    long ssa2;
+    long ssa3;
+    long ssa4;
+    long ssa5;
+    long ssa6;
+    long ssa7;
+    long sss0;
+    long sss1;
+    long sss2;
+    long sss3;
+    long sss4;
+    long sss5;
+    long sss6;
+    long sss7;
+  };
+
+#else /* CRAY2 */
+/* The following structure defines the vector of words
+   returned by the STKSTAT library routine.  */
+struct stk_stat
+  {
+    long now;			/* Current total stack size.  */
+    long maxc;			/* Amount of contiguous space which would
+				   be required to satisfy the maximum
+				   stack demand to date.  */
+    long high_water;		/* Stack high-water mark.  */
+    long overflows;		/* Number of stack overflow ($STKOFEN) calls.  */
+    long hits;			/* Number of internal buffer hits.  */
+    long extends;		/* Number of block extensions.  */
+    long stko_mallocs;		/* Block allocations by $STKOFEN.  */
+    long underflows;		/* Number of stack underflow calls ($STKRETN).  */
+    long stko_free;		/* Number of deallocations by $STKRETN.  */
+    long stkm_free;		/* Number of deallocations by $STKMRET.  */
+    long segments;		/* Current number of stack segments.  */
+    long maxs;			/* Maximum number of stack segments so far.  */
+    long pad_size;		/* Stack pad size.  */
+    long current_address;	/* Current stack segment address.  */
+    long current_size;		/* Current stack segment size.  This
+				   number is actually corrupted by STKSTAT to
+				   include the fifteen word trailer area.  */
+    long initial_address;	/* Address of initial segment.  */
+    long initial_size;		/* Size of initial segment.  */
+  };
+
+/* The following structure describes the data structure which trails
+   any stack segment.  I think that the description in 'asdef' is
+   out of date.  I only describe the parts that I am sure about.  */
+
+struct stk_trailer
+  {
+    long this_address;		/* Address of this block.  */
+    long this_size;		/* Size of this block (does not include
+				   this trailer).  */
+    long unknown2;
+    long unknown3;
+    long link;			/* Address of trailer block of previous
+				   segment.  */
+    long unknown5;
+    long unknown6;
+    long unknown7;
+    long unknown8;
+    long unknown9;
+    long unknown10;
+    long unknown11;
+    long unknown12;
+    long unknown13;
+    long unknown14;
+  };
+
+#endif /* CRAY2 */
+#endif /* not CRAY_STACK */
+
+#ifdef CRAY2
+/* Determine a "stack measure" for an arbitrary ADDRESS.
+   I doubt that "lint" will like this much. */
+
+static long
+i00afunc (long *address)
+{
+  struct stk_stat status;
+  struct stk_trailer *trailer;
+  long *block, size;
+  long result = 0;
+
+  /* We want to iterate through all of the segments.  The first
+     step is to get the stack status structure.  We could do this
+     more quickly and more directly, perhaps, by referencing the
+     $LM00 common block, but I know that this works.  */
+
+  STKSTAT (&status);
+
+  /* Set up the iteration.  */
+
+  trailer = (struct stk_trailer *) (status.current_address
+				    + status.current_size
+				    - 15);
+
+  /* There must be at least one stack segment.  Therefore it is
+     a fatal error if "trailer" is null.  */
+
+  if (trailer == 0)
+    abort ();
+
+  /* Discard segments that do not contain our argument address.  */
+
+  while (trailer != 0)
+    {
+      block = (long *) trailer->this_address;
+      size = trailer->this_size;
+      if (block == 0 || size == 0)
+	abort ();
+      trailer = (struct stk_trailer *) trailer->link;
+      if ((block <= address) && (address < (block + size)))
+	break;
+    }
+
+  /* Set the result to the offset in this segment and add the sizes
+     of all predecessor segments.  */
+
+  result = address - block;
+
+  if (trailer == 0)
+    {
+      return result;
+    }
+
+  do
+    {
+      if (trailer->this_size <= 0)
+	abort ();
+      result += trailer->this_size;
+      trailer = (struct stk_trailer *) trailer->link;
+    }
+  while (trailer != 0);
+
+  /* We are done.  Note that if you present a bogus address (one
+     not in any segment), you will get a different number back, formed
+     from subtracting the address of the first block.  This is probably
+     not what you want.  */
+
+  return (result);
+}
+
+#else /* not CRAY2 */
+/* Stack address function for a CRAY-1, CRAY X-MP, or CRAY Y-MP.
+   Determine the number of the cell within the stack,
+   given the address of the cell.  The purpose of this
+   routine is to linearize, in some sense, stack addresses
+   for alloca.  */
+
+static long
+i00afunc (long address)
+{
+  long stkl = 0;
+
+  long size, pseg, this_segment, stack;
+  long result = 0;
+
+  struct stack_segment_linkage *ssptr;
+
+  /* Register B67 contains the address of the end of the
+     current stack segment.  If you (as a subprogram) store
+     your registers on the stack and find that you are past
+     the contents of B67, you have overflowed the segment.
+
+     B67 also points to the stack segment linkage control
+     area, which is what we are really interested in.  */
+
+  /* This might be _getb67() or GETB67 () or getb67 () */
+  stkl = CRAY_STACKSEG_END ();
+  ssptr = (struct stack_segment_linkage *) stkl;
+
+  /* If one subtracts 'size' from the end of the segment,
+     one has the address of the first word of the segment.
+
+     If this is not the first segment, 'pseg' will be
+     nonzero.  */
+
+  pseg = ssptr->sspseg;
+  size = ssptr->sssize;
+
+  this_segment = stkl - size;
+
+  /* It is possible that calling this routine itself caused
+     a stack overflow.  Discard stack segments which do not
+     contain the target address.  */
+
+  while (!(this_segment <= address && address <= stkl))
+    {
+#ifdef DEBUG_I00AFUNC
+      fprintf (stderr, "%011o %011o %011o\n", this_segment, address, stkl);
+#endif
+      if (pseg == 0)
+	break;
+      stkl = stkl - pseg;
+      ssptr = (struct stack_segment_linkage *) stkl;
+      size = ssptr->sssize;
+      pseg = ssptr->sspseg;
+      this_segment = stkl - size;
+    }
+
+  result = address - this_segment;
+
+  /* If you subtract pseg from the current end of the stack,
+     you get the address of the previous stack segment's end.
+     This seems a little convoluted to me, but I'll bet you save
+     a cycle somewhere.  */
+
+  while (pseg != 0)
+    {
+#ifdef DEBUG_I00AFUNC
+      fprintf (stderr, "%011o %011o\n", pseg, size);
+#endif
+      stkl = stkl - pseg;
+      ssptr = (struct stack_segment_linkage *) stkl;
+      size = ssptr->sssize;
+      pseg = ssptr->sspseg;
+      result += size;
+    }
+  return (result);
+}
+
+#endif /* not CRAY2 */
+#endif /* CRAY && CRAY_STACKSEG_END */
+
+#endif /* no alloca */
+#endif /* !__GNUC__ || __GNUC__ < 2 */
diff --git a/lib/malloc/getpagesize.h b/lib/malloc/getpagesize.h
new file mode 100644
index 0000000..a59eabe
--- /dev/null
+++ b/lib/malloc/getpagesize.h
@@ -0,0 +1,60 @@
+/* Emulation of getpagesize() for systems that need it.
+   Copyright (C) 1991-2003 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne-Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#  if defined (_SC_PAGESIZE)
+#    define getpagesize() sysconf(_SC_PAGESIZE)
+#  else
+#    if defined (_SC_PAGE_SIZE)
+#      define getpagesize() sysconf(_SC_PAGE_SIZE)
+#    endif /* _SC_PAGE_SIZE */
+#  endif /* _SC_PAGESIZE */
+#endif
+
+#if !defined (getpagesize)
+#  if defined (HAVE_SYS_PARAM_H)
+#    include <sys/param.h>
+#  endif
+#  if defined (PAGESIZE)
+#     define getpagesize() PAGESIZE
+#  else /* !PAGESIZE */
+#    if defined (EXEC_PAGESIZE)
+#      define getpagesize() EXEC_PAGESIZE
+#    else /* !EXEC_PAGESIZE */
+#      if defined (NBPG)
+#        if !defined (CLSIZE)
+#          define CLSIZE 1
+#        endif /* !CLSIZE */
+#        define getpagesize() (NBPG * CLSIZE)
+#      else /* !NBPG */
+#        if defined (NBPC)
+#          define getpagesize() NBPC
+#        endif /* NBPC */
+#      endif /* !NBPG */
+#    endif /* !EXEC_PAGESIZE */
+#  endif /* !PAGESIZE */
+#endif /* !getpagesize */
+
+#if !defined (getpagesize)
+#  define getpagesize() 4096  /* Just punt and use reasonable value */
+#endif
diff --git a/lib/malloc/i386-alloca.s b/lib/malloc/i386-alloca.s
new file mode 100644
index 0000000..01b2cfe
--- /dev/null
+++ b/lib/malloc/i386-alloca.s
@@ -0,0 +1,16 @@
+	.file "alloca.s"
+	.text
+	.align 4
+	.def alloca; .val alloca; .scl 2; .type 044; .endef
+	.globl alloca
+alloca:
+	popl %edx
+	popl %eax
+	addl $3,%eax
+	andl $0xfffffffc,%eax
+	subl %eax,%esp
+	movl %esp,%eax
+	pushl %eax
+	pushl %edx
+	ret
+	.def alloca; .val .; .scl -1; .endef
diff --git a/lib/malloc/imalloc.h b/lib/malloc/imalloc.h
new file mode 100644
index 0000000..d07adac
--- /dev/null
+++ b/lib/malloc/imalloc.h
@@ -0,0 +1,173 @@
+/* imalloc.h -- internal malloc definitions shared by source files. */
+
+/* Copyright (C) 2001-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* Must be included *after* config.h */
+
+#ifndef _IMALLOC_H
+#define _IMALLOC_H
+
+#ifdef MALLOC_DEBUG
+#define MALLOC_STATS
+#define MALLOC_TRACE
+#define MALLOC_REGISTER
+#define MALLOC_WATCH
+#endif
+
+#define MALLOC_WRAPFUNCS
+
+/* Generic pointer type. */
+#ifndef PTR_T
+#  if defined (__STDC__)
+#    define PTR_T void *
+#  else
+#    define PTR_T char *
+#  endif
+#endif
+
+#if !defined (NULL)
+#  define NULL 0
+#endif
+
+#if !defined (CPP_STRING)
+#  if defined (HAVE_STRINGIZE)
+#    define CPP_STRING(x) #x
+#  else
+#    define CPP_STRING(x) "x"
+#  endif /* !HAVE_STRINGIZE */
+#endif /* !__STRING */
+
+#if __GNUC__ > 1
+#  define FASTCOPY(s, d, n)  __builtin_memcpy (d, s, n)
+#else /* !__GNUC__ */
+#  if !defined (HAVE_BCOPY)
+#    if !defined (HAVE_MEMMOVE)
+#      define FASTCOPY(s, d, n)  memcpy (d, s, n)
+#    else
+#      define FASTCOPY(s, d, n)  memmove (d, s, n)
+#    endif /* !HAVE_MEMMOVE */
+#  else /* HAVE_BCOPY */
+#    define FASTCOPY(s, d, n)  bcopy (s, d, n)
+#  endif /* HAVE_BCOPY */
+#endif /* !__GNUC__ */
+
+#if !defined (PARAMS)
+#  if defined (__STDC__) || defined (__GNUC__) || defined (__cplusplus) || defined (PROTOTYPES)
+#    define PARAMS(protos) protos
+#  else 
+#    define PARAMS(protos) ()
+#  endif
+#endif
+
+/* Use Duff's device for good zeroing/copying performance.  DO NOT call the
+   Duff's device macros with NBYTES == 0. */
+
+#define MALLOC_BZERO(charp, nbytes)					\
+do {									\
+  if ((nbytes) <= 32) {							\
+    size_t * mzp = (size_t *)(charp);					\
+    unsigned long mctmp = (nbytes)/sizeof(size_t);			\
+    long mcn;								\
+    if (mctmp < 8) mcn = 0; else { mcn = (mctmp-1)/8; mctmp &= 7; }	\
+    switch (mctmp) {							\
+      case 0: for(;;) { *mzp++ = 0;					\
+      case 7:	   *mzp++ = 0;						\
+      case 6:	   *mzp++ = 0;						\
+      case 5:	   *mzp++ = 0;						\
+      case 4:	   *mzp++ = 0;						\
+      case 3:	   *mzp++ = 0;						\
+      case 2:	   *mzp++ = 0;						\
+      case 1:	   *mzp++ = 0; if(mcn <= 0) break; mcn--; }		\
+    }									\
+  else									\
+    memset ((charp), 0, (nbytes));					\
+} while(0)
+
+#define MALLOC_ZERO(charp, nbytes) \
+do { 								\
+  size_t mzsz = (nbytes);					\
+  if (mzsz <= 9 * sizeof(mzsz) {				\
+    size_t *mz = (size_t *)(charp);				\
+    if(mzsz >= 5*sizeof(mzsz)) {	*mz++ = 0;		\
+					*mz++ = 0;		\
+      if(mzsz >= 7*sizeof(mzsz)) {	*mz++ = 0;		\
+					*mz++ = 0;		\
+	if(mzsz >= 9*sizeof(mzsz)) {	*mz++ = 0;		\
+					*mz++ = 0; }}}		\
+					*mz++ = 0;		\
+					*mz++ = 0;		\
+					*mz = 0;		\
+  } else							\
+    memset ((charp), 0, mzsz);					\
+} while (0)
+
+#define MALLOC_MEMSET(charp, xch, nbytes)				\
+do {									\
+  if ((nbytes) <= 32) {							\
+    register char * mzp = (charp);					\
+    unsigned long mctmp = (nbytes);					\
+    register long mcn;							\
+    if (mctmp < 8) mcn = 0; else { mcn = (mctmp-1)/8; mctmp &= 7; }	\
+    switch (mctmp) {							\
+      case 0: for(;;) { *mzp++ = xch;					\
+      case 7:	   *mzp++ = xch;					\
+      case 6:	   *mzp++ = xch;					\
+      case 5:	   *mzp++ = xch;					\
+      case 4:	   *mzp++ = xch;					\
+      case 3:	   *mzp++ = xch;					\
+      case 2:	   *mzp++ = xch;					\
+      case 1:	   *mzp++ = xch; if(mcn <= 0) break; mcn--; }		\
+    }									\
+  } else								\
+    memset ((charp), (xch), (nbytes));					\
+} while(0)
+
+#define MALLOC_MEMCPY(dest,src,nbytes)					\
+do {									\
+  if ((nbytes) <= 32) {							\
+    size_t* mcsrc = (size_t*) src;					\
+    size_t* mcdst = (size_t*) dest;					\
+    unsigned long mctmp = (nbytes)/sizeof(size_t);			\
+    long mcn;								\
+    if (mctmp < 8) mcn = 0; else { mcn = (mctmp-1)/8; mctmp &= 7; }	\
+    switch (mctmp) {							\
+      case 0: for(;;) { *mcdst++ = *mcsrc++;				\
+      case 7:	   *mcdst++ = *mcsrc++;					\
+      case 6:	   *mcdst++ = *mcsrc++;					\
+      case 5:	   *mcdst++ = *mcsrc++;					\
+      case 4:	   *mcdst++ = *mcsrc++;					\
+      case 3:	   *mcdst++ = *mcsrc++;					\
+      case 2:	   *mcdst++ = *mcsrc++;					\
+      case 1:	   *mcdst++ = *mcsrc++; if(mcn <= 0) break; mcn--; }	\
+  } else								\
+    memcpy ((dest), (src), (nbytes))					\
+} while(0)
+
+#if defined (SHELL)
+#  include "bashintl.h"
+#else
+#  define _(x)	x
+#endif
+
+#include <signal.h>
+
+extern void _malloc_block_signals PARAMS((sigset_t *, sigset_t *));
+extern void _malloc_unblock_signals PARAMS((sigset_t *, sigset_t *));
+
+#endif /* _IMALLOC_H */
diff --git a/lib/malloc/malloc.c b/lib/malloc/malloc.c
new file mode 100644
index 0000000..439f8ef
--- /dev/null
+++ b/lib/malloc/malloc.c
@@ -0,0 +1,1481 @@
+/* malloc.c - dynamic memory allocation for bash. */
+
+/*  Copyright (C) 1985-2020 Free Software Foundation, Inc.
+
+    This file is part of GNU Bash, the Bourne-Again SHell.
+    
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * @(#)nmalloc.c 1 (Caltech) 2/21/82
+ *
+ *	U of M Modified: 20 Jun 1983 ACT: strange hacks for Emacs
+ *
+ *	Nov 1983, Mike@BRL, Added support for 4.1C/4.2 BSD.
+ *
+ * [VERY] old explanation:
+ *
+ * This is a very fast storage allocator.  It allocates blocks of a small 
+ * number of different sizes, and keeps free lists of each size.  Blocks
+ * that don't exactly fit are passed up to the next larger size.  In this 
+ * implementation, the available sizes are (2^n)-4 (or -16) bytes long.
+ * This is designed for use in a program that uses vast quantities of
+ * memory, but bombs when it runs out.  To make it a little better, it
+ * warns the user when he starts to get near the end.
+ *
+ * June 84, ACT: modified rcheck code to check the range given to malloc,
+ * rather than the range determined by the 2-power used.
+ *
+ * Jan 85, RMS: calls malloc_warning to issue warning on nearly full.
+ * No longer Emacs-specific; can serve as all-purpose malloc for GNU.
+ * You should call malloc_init to reinitialize after loading dumped Emacs.
+ * Call malloc_stats to get info on memory stats if MALLOC_STATS turned on.
+ * realloc knows how to return same block given, just changing its size,
+ * if the power of 2 is correct.
+ */
+
+/*
+ * nextf[i] is the pointer to the next free block of size 2^(i+3).  The
+ * smallest allocatable block is 8 bytes.  The overhead information will
+ * go in the first int of the block, and the returned pointer will point
+ * to the second.
+ */
+
+/* Define MEMSCRAMBLE to have free() write 0xcf into memory as it's freed, to
+   uncover callers that refer to freed memory, and to have malloc() write 0xdf
+   into memory as it's allocated to avoid referring to previous contents. */
+
+/* SCO 3.2v4 getcwd and possibly other libc routines fail with MEMSCRAMBLE;
+   handled by configure. */
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif /* HAVE_CONFIG_H */
+
+#if defined (SHELL)
+#  include "bashtypes.h"
+#  include "stdc.h"
+#else
+#  include <sys/types.h>
+#endif
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+/* Determine which kind of system this is.  */
+#include <signal.h>
+
+#if defined (HAVE_STRING_H)
+#  include <string.h>
+#else
+#  include <strings.h>
+#endif
+#include <errno.h>
+#include <stdio.h>
+
+#if !defined (botch)
+#include <stdlib.h>
+#endif
+
+#if defined (HAVE_MMAP)
+#include <sys/mman.h>
+#endif
+
+/* Define getpagesize () if the system does not.  */
+#ifndef HAVE_GETPAGESIZE
+#  include "getpagesize.h"
+#endif
+
+#include "imalloc.h"
+#ifdef MALLOC_STATS
+#  include "mstats.h"
+#endif
+#ifdef MALLOC_REGISTER
+#  include "table.h"
+#endif
+#ifdef MALLOC_WATCH
+#  include "watch.h"
+#endif
+
+#ifdef powerof2
+#  undef powerof2
+#endif
+/* Could also use (((x) & -(x)) == (x)) */
+#define powerof2(x)	((((x) - 1) & (x)) == 0)
+
+/* System-specific omissions. */
+#ifdef HPUX
+#  define NO_VALLOC
+#endif
+
+/* SIZEOF_LONG * 4 - 2, usable bins from 1..NBUCKETS-1 */
+#define NBUCKETS	30
+
+#define ISALLOC ((char) 0xf7)	/* magic byte that implies allocation */
+#define ISFREE ((char) 0x54)	/* magic byte that implies free block */
+				/* this is for error checking only */
+#define ISMEMALIGN ((char) 0xd6)  /* Stored before the value returned by
+				     memalign, with the rest of the word
+				     being the distance to the true
+				     beginning of the block.  */
+
+
+/* We have a flag indicating whether memory is allocated, an index in
+   nextf[], a size field, and a sentinel value to determine whether or
+   not a caller wrote before the start of allocated memory; to realloc()
+   memory we either copy mh_nbytes or just change mh_nbytes if there is
+   enough room in the block for the new size.  Range checking is always
+   done. */
+union mhead {
+#if SIZEOF_CHAR_P == 8
+  bits64_t mh_align[2];						/* 16 */
+#else
+  bits64_t mh_align;						/* 8 */
+#endif
+  struct {
+    char mi_alloc; 		/* ISALLOC or ISFREE */		/* 1 */
+    char mi_index;		/* index in nextf[] */		/* 1 */
+    /* Remainder are valid only when block is allocated */
+    u_bits16_t mi_magic2;	/* should be == MAGIC2 */	/* 2 */
+    u_bits32_t mi_nbytes;	/* # of bytes allocated */	/* 4 */
+#if SIZEOF_CHAR_P == 8
+    char mi_magic8[8];		/* MAGIC1 guard bytes */	/* 8 */
+#endif
+  } minfo;
+};
+#define mh_alloc	minfo.mi_alloc
+#define mh_index	minfo.mi_index
+#define mh_nbytes	minfo.mi_nbytes
+#define mh_magic2	minfo.mi_magic2
+#define mh_magic8	minfo.mi_magic8
+
+#define MOVERHEAD	sizeof(union mhead)
+
+#if SIZEOF_CHAR_P == 8
+#define MALIGN_MASK	15
+#else
+#define MALIGN_MASK	7	/* one less than desired alignment */
+#endif
+
+typedef union _malloc_guard {
+  char s[4];
+  u_bits32_t i;
+} mguard_t;
+
+/* Access free-list pointer of a block.
+   It is stored at block + sizeof (char *).
+   This is not a field in the minfo structure member of union mhead
+   because we want sizeof (union mhead)
+   to describe the overhead for when the block is in use,
+   and we do not want the free-list pointer to count in that.  */
+
+/* If SIZEOF_CHAR_P == 8, this goes into the mh_magic8 buffer at the end of
+   the rest of the struct. This may need adjusting. */
+#define CHAIN(a) \
+  (*(union mhead **) (sizeof (char *) + (char *) (a)))
+
+/* To implement range checking, we write magic values in at the beginning
+   and end of each allocated block, and make sure they are undisturbed
+   whenever a free or a realloc occurs. */
+
+/* Written in the bytes before the block's real space (-SIZEOF_CHAR_P bytes) */
+#define MAGIC1 0x55
+#define MAGIC2 0x5555
+#define MSLOP  4		/* 4 bytes extra for u_bits32_t size */
+
+/* How many bytes are actually allocated for a request of size N --
+   rounded up to nearest multiple of 2*SIZEOF_CHAR_P after accounting for
+   malloc overhead. */
+#define ALLOCATED_BYTES(n) \
+	(((n) + MOVERHEAD + MSLOP + MALIGN_MASK) & ~MALIGN_MASK)
+
+#define ASSERT(p) \
+  do \
+    { \
+      if (!(p)) xbotch((PTR_T)0, ERR_ASSERT_FAILED, CPP_STRING(p), file, line); \
+    } \
+  while (0)
+
+/* Minimum and maximum bucket indices for block splitting (and to bound
+   the search for a block to split). */
+#define SPLIT_MIN	2	/* XXX - was 3 */
+#define SPLIT_MID	11
+#define SPLIT_MAX	14
+
+/* Minimum and maximum bucket indices for block coalescing. */
+#define COMBINE_MIN	2
+#define COMBINE_MAX	(pagebucket - 1)	/* XXX */
+
+#define LESSCORE_MIN	10
+#define LESSCORE_FRC	13
+
+#define STARTBUCK	1
+
+/* Should we use mmap for large allocations? */
+#if defined (HAVE_MMAP)
+#  if defined (MAP_ANON) && !defined (MAP_ANONYMOUS)
+#    define MAP_ANONYMOUS MAP_ANON
+#  endif
+#endif
+
+#if defined (HAVE_MMAP) && defined (MAP_ANONYMOUS)
+#  define USE_MMAP
+#endif
+
+#if defined (USE_MMAP)
+#  define MMAP_THRESHOLD	14	/* must be >= SPLIT_MAX, COMBINE_MAX */
+#else
+#  define MMAP_THRESHOLD	(8 * SIZEOF_LONG)
+#endif
+
+/* Flags for the internal functions. */
+#define MALLOC_WRAPPER	0x01	/* wrapper function */
+#define MALLOC_INTERNAL	0x02	/* internal function calling another */
+#define MALLOC_NOTRACE	0x04	/* don't trace this allocation or free */
+#define MALLOC_NOREG	0x08	/* don't register this allocation or free */
+
+/* Future use. */
+#define ERR_DUPFREE		0x01
+#define ERR_UNALLOC		0x02
+#define ERR_UNDERFLOW		0x04	
+#define ERR_ASSERT_FAILED	0x08
+
+/* Evaluates to true if NB is appropriate for bucket NU.  NB is adjusted
+   appropriately by the caller to account for malloc overhead.  This only
+   checks that the recorded size is not too big for the bucket.  We
+   can't check whether or not it's in between NU and NU-1 because we
+   might have encountered a busy bucket when allocating and moved up to
+   the next size. */
+#define IN_BUCKET(nb, nu)	((nb) <= binsizes[(nu)])
+
+/* Use this when we want to be sure that NB is in bucket NU. */
+#define RIGHT_BUCKET(nb, nu) \
+	(((nb) > binsizes[(nu)-1]) && ((nb) <= binsizes[(nu)]))
+
+/* nextf[i] is free list of blocks of size 2**(i + 3)  */
+
+static union mhead *nextf[NBUCKETS];
+
+/* busy[i] is nonzero while allocation or free of block size i is in progress. */
+
+static char busy[NBUCKETS];
+
+static int pagesz;	/* system page size. */
+static int pagebucket;	/* bucket for requests a page in size */
+static int maxbuck;	/* highest bucket receiving allocation request. */
+
+static char *memtop;	/* top of heap */
+
+static const unsigned long binsizes[NBUCKETS] = {
+	8UL, 16UL, 32UL, 64UL, 128UL, 256UL, 512UL, 1024UL, 2048UL, 4096UL,
+	8192UL, 16384UL, 32768UL, 65536UL, 131072UL, 262144UL, 524288UL,
+	1048576UL, 2097152UL, 4194304UL, 8388608UL, 16777216UL, 33554432UL,
+	67108864UL, 134217728UL, 268435456UL, 536870912UL, 1073741824UL,
+	2147483648UL, 4294967295UL
+};
+
+/* binsizes[x] == (1 << ((x) + 3)) */
+#define binsize(x)	binsizes[(x)]
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+/* Declarations for internal functions */
+static PTR_T internal_malloc PARAMS((size_t, const char *, int, int));
+static PTR_T internal_realloc PARAMS((PTR_T, size_t, const char *, int, int));
+static void internal_free PARAMS((PTR_T, const char *, int, int));
+static PTR_T internal_memalign PARAMS((size_t, size_t, const char *, int, int));
+#ifndef NO_CALLOC
+static PTR_T internal_calloc PARAMS((size_t, size_t, const char *, int, int));
+static void internal_cfree PARAMS((PTR_T, const char *, int, int));
+#endif
+#ifndef NO_VALLOC
+static PTR_T internal_valloc PARAMS((size_t, const char *, int, int));
+#endif
+
+#if defined (botch)
+extern void botch ();
+#else
+static void botch PARAMS((const char *, const char *, int));
+#endif
+static void xbotch PARAMS((PTR_T, int, const char *, const char *, int));
+
+#if !HAVE_DECL_SBRK
+extern char *sbrk ();
+#endif /* !HAVE_DECL_SBRK */
+
+#ifdef SHELL
+extern int running_trap;
+extern int signal_is_trapped PARAMS((int));
+#endif
+
+#ifdef MALLOC_STATS
+struct _malstats _mstats;
+#endif /* MALLOC_STATS */
+
+/* Debugging variables available to applications. */
+int malloc_flags = 0;	/* future use */
+int malloc_trace = 0;	/* trace allocations and frees to stderr */
+int malloc_register = 0;	/* future use */
+
+/* Use a variable in case we want to dynamically adapt it in the future */
+int malloc_mmap_threshold = MMAP_THRESHOLD;
+
+#ifdef MALLOC_TRACE
+char _malloc_trace_buckets[NBUCKETS];
+
+/* These should really go into a header file. */
+extern void mtrace_alloc PARAMS((const char *, PTR_T, size_t, const char *, int));
+extern void mtrace_free PARAMS((PTR_T, int, const char *, int));
+#endif
+
+#if !defined (botch)
+static void
+botch (s, file, line)
+     const char *s;
+     const char *file;
+     int line;
+{
+  fprintf (stderr, _("malloc: failed assertion: %s\n"), s);
+  (void)fflush (stderr);
+  abort ();
+}
+#endif
+
+/* print the file and line number that caused the assertion failure and
+   call botch() to do whatever the application wants with the information */
+static void
+xbotch (mem, e, s, file, line)
+     PTR_T mem;
+     int e;
+     const char *s;
+     const char *file;
+     int line;
+{
+  fprintf (stderr, _("\r\nmalloc: %s:%d: assertion botched\r\n"),
+			file ? file : _("unknown"), line);
+#ifdef MALLOC_REGISTER
+  if (mem != NULL && malloc_register)
+    mregister_describe_mem (mem, stderr);
+#endif
+  (void)fflush (stderr);
+  botch(s, file, line);
+}
+
+/* Coalesce two adjacent free blocks off the free list for size NU - 1,
+   as long as we can find two adjacent free blocks.  nextf[NU -1] is
+   assumed to not be busy; the caller (morecore()) checks for this. 
+   BUSY[NU] must be set to 1. */
+static void
+bcoalesce (nu)
+     register int nu;
+{
+  register union mhead *mp, *mp1, *mp2;
+  register int nbuck;
+  unsigned long siz;
+
+  nbuck = nu - 1;
+  if (nextf[nbuck] == 0 || busy[nbuck])
+    return;
+
+  busy[nbuck] = 1;
+  siz = binsize (nbuck);
+
+  mp2 = mp1 = nextf[nbuck];
+  mp = CHAIN (mp1);
+  while (mp && mp != (union mhead *)((char *)mp1 + siz))
+    {
+      mp2 = mp1;
+      mp1 = mp;
+      mp = CHAIN (mp);
+    }
+
+  if (mp == 0)
+    {
+      busy[nbuck] = 0;
+      return;
+    }
+
+  /* OK, now we have mp1 pointing to the block we want to add to nextf[NU].
+     CHAIN(mp2) must equal mp1.  Check that mp1 and mp are adjacent. */
+  if (mp2 != mp1 && CHAIN(mp2) != mp1)
+    {
+      busy[nbuck] = 0;
+      xbotch ((PTR_T)0, 0, "bcoalesce: CHAIN(mp2) != mp1", (char *)NULL, 0);
+    }
+
+#ifdef MALLOC_DEBUG
+  if (CHAIN (mp1) != (union mhead *)((char *)mp1 + siz))
+    {
+      busy[nbuck] = 0;
+      return;	/* not adjacent */
+    }
+#endif
+
+  /* Since they are adjacent, remove them from the free list */
+  if (mp1 == nextf[nbuck])
+    nextf[nbuck] = CHAIN (mp);
+  else
+    CHAIN (mp2) = CHAIN (mp);
+  busy[nbuck] = 0;
+
+#ifdef MALLOC_STATS
+  _mstats.tbcoalesce++;
+  _mstats.ncoalesce[nbuck]++;
+#endif
+
+  /* And add the combined two blocks to nextf[NU]. */
+  mp1->mh_alloc = ISFREE;
+  mp1->mh_index = nu;
+  CHAIN (mp1) = nextf[nu];
+  nextf[nu] = mp1;
+}
+
+/* Split a block at index > NU (but less than SPLIT_MAX) into a set of
+   blocks of the correct size, and attach them to nextf[NU].  nextf[NU]
+   is assumed to be empty.  Must be called with signals blocked (e.g.,
+   by morecore()).  BUSY[NU] must be set to 1. */
+static void
+bsplit (nu)
+     register int nu;
+{
+  register union mhead *mp;
+  int nbuck, nblks, split_max;
+  unsigned long siz;
+
+  split_max = (maxbuck > SPLIT_MAX) ? maxbuck : SPLIT_MAX;
+
+  if (nu >= SPLIT_MID)
+    {
+      for (nbuck = split_max; nbuck > nu; nbuck--)
+	{
+	  if (busy[nbuck] || nextf[nbuck] == 0)
+	    continue;
+	  break;
+	}
+    }
+  else
+    {
+      for (nbuck = nu + 1; nbuck <= split_max; nbuck++)
+	{
+	  if (busy[nbuck] || nextf[nbuck] == 0)
+	    continue;
+	  break;
+	}
+    }
+
+  if (nbuck > split_max || nbuck <= nu)
+    return;
+
+  /* XXX might want to split only if nextf[nbuck] has >= 2 blocks free
+     and nbuck is below some threshold. */
+
+  /* Remove the block from the chain of larger blocks. */
+  busy[nbuck] = 1;
+  mp = nextf[nbuck];
+  nextf[nbuck] = CHAIN (mp);
+  busy[nbuck] = 0;
+
+#ifdef MALLOC_STATS
+  _mstats.tbsplit++;
+  _mstats.nsplit[nbuck]++;
+#endif
+
+  /* Figure out how many blocks we'll get. */
+  siz = binsize (nu);
+  nblks = binsize (nbuck) / siz;
+
+  /* Split the block and put it on the requested chain. */
+  nextf[nu] = mp;
+  while (1)
+    {
+      mp->mh_alloc = ISFREE;
+      mp->mh_index = nu;
+      if (--nblks <= 0) break;
+      CHAIN (mp) = (union mhead *)((char *)mp + siz);
+      mp = (union mhead *)((char *)mp + siz);
+    }
+  CHAIN (mp) = 0;
+}
+
+/* Take the memory block MP and add it to a chain < NU.  NU is the right bucket,
+   but is busy.  This avoids memory orphaning. */
+static void
+xsplit (mp, nu)
+     union mhead *mp;
+     int nu;
+{
+  union mhead *nh;
+  int nbuck, nblks, split_max;
+  unsigned long siz;
+
+  nbuck = nu - 1;
+  while (nbuck >= SPLIT_MIN && busy[nbuck])
+    nbuck--;
+  if (nbuck < SPLIT_MIN)
+    return;
+
+#ifdef MALLOC_STATS
+  _mstats.tbsplit++;
+  _mstats.nsplit[nu]++;
+#endif
+
+  /* Figure out how many blocks we'll get. */
+  siz = binsize (nu);			/* original block size */
+  nblks = siz / binsize (nbuck);	/* should be 2 most of the time */
+
+  /* And add it to nextf[nbuck] */
+  siz = binsize (nbuck);		/* XXX - resetting here */
+  nh = mp;
+  while (1)
+    {
+      mp->mh_alloc = ISFREE;
+      mp->mh_index = nbuck;
+      if (--nblks <= 0) break;
+      CHAIN (mp) = (union mhead *)((char *)mp + siz);
+      mp = (union mhead *)((char *)mp + siz);
+    }
+  busy[nbuck] = 1;
+  CHAIN (mp) = nextf[nbuck];
+  nextf[nbuck] = nh;
+  busy[nbuck] = 0;
+}
+
+void
+_malloc_block_signals (setp, osetp)
+     sigset_t *setp, *osetp;
+{
+#ifdef HAVE_POSIX_SIGNALS
+  sigfillset (setp);
+  sigemptyset (osetp);
+  sigprocmask (SIG_BLOCK, setp, osetp);
+#else
+#  if defined (HAVE_BSD_SIGNALS)
+  *osetp = sigsetmask (-1);
+#  endif
+#endif
+}
+
+void
+_malloc_unblock_signals (setp, osetp)
+     sigset_t *setp, *osetp;
+{
+#ifdef HAVE_POSIX_SIGNALS
+  sigprocmask (SIG_SETMASK, osetp, (sigset_t *)NULL);
+#else
+#  if defined (HAVE_BSD_SIGNALS)
+  sigsetmask (*osetp);
+#  endif
+#endif
+}
+
+/* Return some memory to the system by reducing the break.  This is only
+   called with NU > pagebucket, so we're always assured of giving back
+   more than one page of memory. */  
+static void
+lesscore (nu)			/* give system back some memory */
+     register int nu;		/* size index we're discarding  */
+{
+  long siz;
+
+  siz = binsize (nu);
+  /* Should check for errors here, I guess. */
+  sbrk (-siz);
+  memtop -= siz;
+
+#ifdef MALLOC_STATS
+  _mstats.nsbrk++;
+  _mstats.tsbrk -= siz;
+  _mstats.nlesscore[nu]++;
+#endif
+}
+
+/* Ask system for more memory; add to NEXTF[NU].  BUSY[NU] must be set to 1. */  
+static void
+morecore (nu)
+     register int nu;		/* size index to get more of  */
+{
+  register union mhead *mp;
+  register int nblks;
+  register long siz;
+  long sbrk_amt;		/* amount to get via sbrk() */
+  sigset_t set, oset;
+  int blocked_sigs;
+
+  /* Block all signals in case we are executed from a signal handler. */
+  blocked_sigs = 0;
+#ifdef SHELL
+#  if defined (SIGCHLD)
+  if (running_trap || signal_is_trapped (SIGINT) || signal_is_trapped (SIGCHLD))
+#  else
+  if (running_trap || signal_is_trapped (SIGINT))
+#  endif
+#endif
+    {
+      _malloc_block_signals (&set, &oset);
+      blocked_sigs = 1;
+    }
+
+  siz = binsize (nu);	/* size of desired block for nextf[nu] */
+
+  if (siz < 0)
+    goto morecore_done;		/* oops */
+
+#ifdef MALLOC_STATS
+  _mstats.nmorecore[nu]++;
+#endif
+
+  /* Try to split a larger block here, if we're within the range of sizes
+     to split. */
+  if (nu >= SPLIT_MIN && nu <= malloc_mmap_threshold)
+    {
+      bsplit (nu);
+      if (nextf[nu] != 0)
+	goto morecore_done;
+    }
+
+  /* Try to coalesce two adjacent blocks from the free list on nextf[nu - 1],
+     if we can, and we're within the range of the block coalescing limits. */
+  if (nu >= COMBINE_MIN && nu < COMBINE_MAX && nu <= malloc_mmap_threshold && busy[nu - 1] == 0 && nextf[nu - 1])
+    {
+      bcoalesce (nu);
+      if (nextf[nu] != 0)
+	goto morecore_done;
+    }
+
+  /* Take at least a page, and figure out how many blocks of the requested
+     size we're getting. */
+  if (siz <= pagesz)
+    {
+      sbrk_amt = pagesz;
+      nblks = sbrk_amt / siz;
+    }
+  else
+    {
+      /* We always want to request an integral multiple of the page size
+	 from the kernel, so let's compute whether or not `siz' is such
+	 an amount.  If it is, we can just request it.  If not, we want
+	 the smallest integral multiple of pagesize that is larger than
+	 `siz' and will satisfy the request. */
+      sbrk_amt = siz & (pagesz - 1);
+      if (sbrk_amt == 0)
+	sbrk_amt = siz;
+      else
+	sbrk_amt = siz + pagesz - sbrk_amt;
+      nblks = 1;
+    }
+
+#if defined (USE_MMAP)
+  if (nu > malloc_mmap_threshold)
+    {
+      mp = (union mhead *)mmap (0, sbrk_amt, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
+      if ((void *)mp == MAP_FAILED)
+	goto morecore_done;
+      nextf[nu] = mp;
+      mp->mh_alloc = ISFREE;
+      mp->mh_index = nu;
+      CHAIN (mp) = 0;
+#ifdef MALLOC_STATS
+      _mstats.nmmap++;
+      _mstats.tmmap += sbrk_amt;
+#endif
+      goto morecore_done;
+    }
+#endif
+	
+
+#ifdef MALLOC_STATS
+  _mstats.nsbrk++;
+  _mstats.tsbrk += sbrk_amt;
+#endif
+
+  mp = (union mhead *) sbrk (sbrk_amt);
+
+  /* Totally out of memory. */
+  if ((long)mp == -1)
+    goto morecore_done;
+
+  memtop += sbrk_amt;
+
+  /* shouldn't happen, but just in case -- require 8- or 16-byte alignment */
+  if ((long)mp & MALIGN_MASK)
+    {
+      mp = (union mhead *) (((long)mp + MALIGN_MASK) & ~MALIGN_MASK);
+      nblks--;
+    }
+
+  /* save new header and link the nblks blocks together */
+  nextf[nu] = mp;
+  while (1)
+    {
+      mp->mh_alloc = ISFREE;
+      mp->mh_index = nu;
+      if (--nblks <= 0) break;
+      CHAIN (mp) = (union mhead *)((char *)mp + siz);
+      mp = (union mhead *)((char *)mp + siz);
+    }
+  CHAIN (mp) = 0;
+
+morecore_done:
+  if (blocked_sigs)
+    _malloc_unblock_signals (&set, &oset);
+}
+
+static void
+malloc_debug_dummy ()
+{
+  write (1, "malloc_debug_dummy\n", 19);
+}
+
+#if SIZEOF_CHAR_P == 8
+#define PREPOP_BIN	3
+#define PREPOP_SIZE	64
+#else
+#define PREPOP_BIN	2
+#define PREPOP_SIZE	32
+#endif
+
+static int
+pagealign ()
+{
+  register int nunits;
+  register union mhead *mp;
+  long sbrk_needed;
+  char *curbrk;
+
+  pagesz = getpagesize ();
+  if (pagesz < 1024)
+    pagesz = 1024;
+
+  /* OK, how much do we need to allocate to make things page-aligned?
+     Some of this partial page will be wasted space, but we'll use as
+     much as we can.  Once we figure out how much to advance the break
+     pointer, go ahead and do it. */
+  memtop = curbrk = sbrk (0);
+  sbrk_needed = pagesz - ((long)curbrk & (pagesz - 1));	/* sbrk(0) % pagesz */
+  if (sbrk_needed < 0)
+    sbrk_needed += pagesz;
+
+  /* Now allocate the wasted space. */
+  if (sbrk_needed)
+    {
+#ifdef MALLOC_STATS
+      _mstats.nsbrk++;
+      _mstats.tsbrk += sbrk_needed;
+#endif
+      curbrk = sbrk (sbrk_needed);
+      if ((long)curbrk == -1)
+	return -1;
+      memtop += sbrk_needed;
+
+      /* Take the memory which would otherwise be wasted and populate the most
+	 popular bin (3 == 64 bytes) with it.  Add whatever we need to curbrk
+	 to make things 64-byte aligned, compute how many 64-byte chunks we're
+	 going to get, and set up the bin. */
+      curbrk += sbrk_needed & (PREPOP_SIZE - 1);
+      sbrk_needed -= sbrk_needed & (PREPOP_SIZE - 1);
+      nunits = sbrk_needed / PREPOP_SIZE;
+
+      if (nunits > 0)
+	{
+	  mp = (union mhead *)curbrk;
+
+	  nextf[PREPOP_BIN] = mp;
+	  while (1)
+	    {
+	      mp->mh_alloc = ISFREE;
+	      mp->mh_index = PREPOP_BIN;
+	      if (--nunits <= 0) break;
+	      CHAIN(mp) = (union mhead *)((char *)mp + PREPOP_SIZE);
+	      mp = (union mhead *)((char *)mp + PREPOP_SIZE);
+	    }
+	  CHAIN(mp) = 0;
+	}
+    }
+
+  /* compute which bin corresponds to the page size. */
+  for (nunits = 7; nunits < NBUCKETS; nunits++)
+    if (pagesz <= binsize(nunits))
+      break;
+  pagebucket = nunits;
+
+  return 0;
+}
+    
+static PTR_T
+internal_malloc (n, file, line, flags)		/* get a block */
+     size_t n;
+     const char *file;
+     int line, flags;
+{
+  register union mhead *p;
+  register int nunits;
+  register char *m, *z;
+  long nbytes;
+  mguard_t mg;
+
+  /* Get the system page size and align break pointer so future sbrks will
+     be page-aligned.  The page size must be at least 1K -- anything
+     smaller is increased. */
+  if (pagesz == 0)
+    if (pagealign () < 0)
+      return ((PTR_T)NULL);
+ 
+  /* Figure out how many bytes are required, rounding up to the nearest
+     multiple of 8, then figure out which nextf[] area to use.  Try to
+     be smart about where to start searching -- if the number of bytes
+     needed is greater than the page size, we can start at pagebucket. */
+  nbytes = ALLOCATED_BYTES(n);
+  nunits = (nbytes <= (pagesz >> 1)) ? STARTBUCK : pagebucket;
+  for ( ; nunits < NBUCKETS; nunits++)
+    if (nbytes <= binsize(nunits))
+      break;
+
+  /* Silently reject too-large requests. XXX - can increase this if HAVE_MMAP */
+  if (nunits >= NBUCKETS)
+    return ((PTR_T) NULL);
+
+  /* In case this is reentrant use of malloc from signal handler,
+     pick a block size that no other malloc level is currently
+     trying to allocate.  That's the easiest harmless way not to
+     interfere with the other level of execution.  */
+#ifdef MALLOC_STATS
+  if (busy[nunits]) _mstats.nrecurse++;
+#endif
+  while (busy[nunits]) nunits++;
+  busy[nunits] = 1;
+
+  if (nunits > maxbuck)
+    maxbuck = nunits;
+
+  /* If there are no blocks of the appropriate size, go get some */
+  if (nextf[nunits] == 0)
+    morecore (nunits);
+
+  /* Get one block off the list, and set the new list head */
+  if ((p = nextf[nunits]) == NULL)
+    {
+      busy[nunits] = 0;
+      return NULL;
+    }
+  nextf[nunits] = CHAIN (p);
+  busy[nunits] = 0;
+
+  /* Check for free block clobbered */
+  /* If not for this check, we would gobble a clobbered free chain ptr
+     and bomb out on the NEXT allocate of this size block */
+  if (p->mh_alloc != ISFREE || p->mh_index != nunits)
+    xbotch ((PTR_T)(p+1), 0, _("malloc: block on free list clobbered"), file, line);
+
+  /* Fill in the info, and set up the magic numbers for range checking. */
+  p->mh_alloc = ISALLOC;
+  p->mh_magic2 = MAGIC2;
+  p->mh_nbytes = n;
+
+#if SIZEOF_CHAR_P == 8
+  /* Begin guard */
+  MALLOC_MEMSET ((char *)p->mh_magic8, MAGIC1, 8);
+#endif
+
+  /* End guard */
+  mg.i = n;
+  z = mg.s;
+  m = (char *) (p + 1) + n;
+  *m++ = *z++, *m++ = *z++, *m++ = *z++, *m++ = *z++;
+
+#ifdef MEMSCRAMBLE
+  if (n)
+    MALLOC_MEMSET ((char *)(p + 1), 0xdf, n);	/* scramble previous contents */
+#endif
+#ifdef MALLOC_STATS
+  _mstats.nmalloc[nunits]++;
+  _mstats.tmalloc[nunits]++;
+  _mstats.nmal++;
+  _mstats.bytesreq += n;
+#endif /* MALLOC_STATS */
+
+#ifdef MALLOC_TRACE
+  if (malloc_trace && (flags & MALLOC_NOTRACE) == 0)
+    mtrace_alloc ("malloc", p + 1, n, file, line);
+  else if (_malloc_trace_buckets[nunits])
+    mtrace_alloc ("malloc", p + 1, n, file, line);
+#endif
+
+#ifdef MALLOC_REGISTER
+  if (malloc_register && (flags & MALLOC_NOREG) == 0)
+    mregister_alloc ("malloc", p + 1, n, file, line);
+#endif
+
+#ifdef MALLOC_WATCH
+  if (_malloc_nwatch > 0)
+    _malloc_ckwatch (p + 1, file, line, W_ALLOC, n);
+#endif
+
+#if defined (MALLOC_DEBUG)
+  z = (char *) (p + 1);
+  /* Check alignment of returned pointer */
+  if ((unsigned long)z & MALIGN_MASK)
+    fprintf (stderr, "malloc: %s:%d: warning: request for %d bytes not aligned on %d byte boundary\r\n",
+	file ? file : _("unknown"), line, p->mh_nbytes, MALIGN_MASK+1);
+#endif
+
+  return (PTR_T) (p + 1);
+}
+
+static void
+internal_free (mem, file, line, flags)
+     PTR_T mem;
+     const char *file;
+     int line, flags;
+{
+  register union mhead *p;
+  register char *ap, *z;
+  register int nunits;
+  register unsigned int nbytes;
+  int ubytes;		/* caller-requested size */
+  mguard_t mg;
+
+  if ((ap = (char *)mem) == 0)
+    return;
+
+  p = (union mhead *) ap - 1;
+
+  if (p->mh_alloc == ISMEMALIGN)
+    {
+      ap -= p->mh_nbytes;
+      p = (union mhead *) ap - 1;
+    }
+
+#if defined (MALLOC_TRACE) || defined (MALLOC_REGISTER) || defined (MALLOC_WATCH)
+  if (malloc_trace || malloc_register || _malloc_nwatch > 0)
+    ubytes = p->mh_nbytes;
+#endif
+
+  if (p->mh_alloc != ISALLOC)
+    {
+      if (p->mh_alloc == ISFREE)
+	xbotch (mem, ERR_DUPFREE,
+		_("free: called with already freed block argument"), file, line);
+      else
+	xbotch (mem, ERR_UNALLOC,
+		_("free: called with unallocated block argument"), file, line);
+    }
+
+  ASSERT (p->mh_magic2 == MAGIC2);
+
+  nunits = p->mh_index;
+  nbytes = ALLOCATED_BYTES(p->mh_nbytes);
+  /* Since the sizeof(u_bits32_t) bytes before the memory handed to the user
+     are now used for the number of bytes allocated, a simple check of
+     mh_magic2 is no longer sufficient to catch things like p[-1] = 'x'.
+     We sanity-check the value of mh_nbytes against the size of the blocks
+     in the appropriate bucket before we use it.  This can still cause problems
+     and obscure errors if mh_nbytes is wrong but still within range; the
+     checks against the size recorded at the end of the chunk will probably
+     fail then.  Using MALLOC_REGISTER will help here, since it saves the
+     original number of bytes requested. */
+
+  if (IN_BUCKET(nbytes, nunits) == 0)
+    xbotch (mem, ERR_UNDERFLOW,
+	    _("free: underflow detected; mh_nbytes out of range"), file, line);
+#if SIZEOF_CHAR_P == 8
+  {
+    int i;
+    for (i = 0, z = p->mh_magic8; i < 8; i++)
+      if (*z++ != MAGIC1)
+	xbotch (mem, ERR_UNDERFLOW,
+		_("free: underflow detected; magic8 corrupted"), file, line);
+  }
+#endif
+
+  ap += p->mh_nbytes;
+  z = mg.s;
+  *z++ = *ap++, *z++ = *ap++, *z++ = *ap++, *z++ = *ap++;  
+  if (mg.i != p->mh_nbytes)
+    xbotch (mem, ERR_ASSERT_FAILED, _("free: start and end chunk sizes differ"), file, line);
+
+#if defined (USE_MMAP)
+  if (nunits > malloc_mmap_threshold)
+    {
+      munmap (p, binsize (nunits));
+#if defined (MALLOC_STATS)
+      _mstats.nlesscore[nunits]++;
+#endif
+      goto free_return;
+    }
+#endif
+
+#if GLIBC21
+  if (nunits >= LESSCORE_MIN && ((char *)p + binsize(nunits) == sbrk (0)))
+#else
+  if (nunits >= LESSCORE_MIN && ((char *)p + binsize(nunits) == memtop))
+#endif
+    {
+      /* If above LESSCORE_FRC, give back unconditionally.  This should be set
+	 high enough to be infrequently encountered.  If between LESSCORE_MIN
+	 and LESSCORE_FRC, call lesscore if the bucket is marked as busy or if
+	 there's already a block on the free list. */
+      if ((nunits >= LESSCORE_FRC) || busy[nunits] || nextf[nunits] != 0)
+	{
+	  lesscore (nunits);
+	  /* keeps the tracing and registering code in one place */
+	  goto free_return;
+	}
+    }
+
+#ifdef MEMSCRAMBLE
+  if (p->mh_nbytes)
+    MALLOC_MEMSET (mem, 0xcf, p->mh_nbytes);
+#endif
+
+  ASSERT (nunits < NBUCKETS);
+
+  if (busy[nunits] == 1)
+    {
+      xsplit (p, nunits);	/* split block and add to different chain */
+      goto free_return;
+    }
+
+  p->mh_alloc = ISFREE;
+  /* Protect against signal handlers calling malloc.  */
+  busy[nunits] = 1;
+  /* Put this block on the free list.  */
+  CHAIN (p) = nextf[nunits];
+  nextf[nunits] = p;
+  busy[nunits] = 0;
+
+free_return:
+  ;		/* Empty statement in case this is the end of the function */
+
+#ifdef MALLOC_STATS
+  _mstats.nmalloc[nunits]--;
+  _mstats.nfre++;
+#endif /* MALLOC_STATS */
+
+#ifdef MALLOC_TRACE
+  if (malloc_trace && (flags & MALLOC_NOTRACE) == 0)
+    mtrace_free (mem, ubytes, file, line);
+  else if (_malloc_trace_buckets[nunits])
+    mtrace_free (mem, ubytes, file, line);
+#endif
+
+#ifdef MALLOC_REGISTER
+  if (malloc_register && (flags & MALLOC_NOREG) == 0)
+    mregister_free (mem, ubytes, file, line);
+#endif
+
+#ifdef MALLOC_WATCH
+  if (_malloc_nwatch > 0)
+    _malloc_ckwatch (mem, file, line, W_FREE, ubytes);
+#endif
+}
+
+static PTR_T
+internal_realloc (mem, n, file, line, flags)
+     PTR_T mem;
+     register size_t n;
+     const char *file;
+     int line, flags;
+{
+  register union mhead *p;
+  register u_bits32_t tocopy;
+  register unsigned int nbytes;
+  register int nunits;
+  register char *m, *z;
+  mguard_t mg;
+
+#ifdef MALLOC_STATS
+  _mstats.nrealloc++;
+#endif
+
+  if (n == 0)
+    {
+      internal_free (mem, file, line, MALLOC_INTERNAL);
+      return (NULL);
+    }
+  if ((p = (union mhead *) mem) == 0)
+    return internal_malloc (n, file, line, MALLOC_INTERNAL);
+
+  p--;
+  nunits = p->mh_index;
+  ASSERT (nunits < NBUCKETS);
+
+  if (p->mh_alloc != ISALLOC)
+    xbotch (mem, ERR_UNALLOC,
+	    _("realloc: called with unallocated block argument"), file, line);
+
+  ASSERT (p->mh_magic2 == MAGIC2);
+  nbytes = ALLOCATED_BYTES(p->mh_nbytes);
+  /* Since the sizeof(u_bits32_t) bytes before the memory handed to the user
+     are now used for the number of bytes allocated, a simple check of
+     mh_magic2 is no longer sufficient to catch things like p[-1] = 'x'.
+     We sanity-check the value of mh_nbytes against the size of the blocks
+     in the appropriate bucket before we use it.  This can still cause problems
+     and obscure errors if mh_nbytes is wrong but still within range; the
+     checks against the size recorded at the end of the chunk will probably
+     fail then.  Using MALLOC_REGISTER will help here, since it saves the
+     original number of bytes requested. */
+  if (IN_BUCKET(nbytes, nunits) == 0)
+    xbotch (mem, ERR_UNDERFLOW,
+	    _("realloc: underflow detected; mh_nbytes out of range"), file, line);
+#if SIZEOF_CHAR_P == 8
+  {
+    int i;
+    for (i = 0, z = p->mh_magic8; i < 8; i++)
+      if (*z++ != MAGIC1)
+	xbotch (mem, ERR_UNDERFLOW,
+		_("realloc: underflow detected; magic8 corrupted"), file, line);
+
+  }
+#endif
+
+  m = (char *)mem + (tocopy = p->mh_nbytes);
+  z = mg.s;
+  *z++ = *m++, *z++ = *m++, *z++ = *m++, *z++ = *m++;
+  if (mg.i != p->mh_nbytes)
+    xbotch (mem, ERR_ASSERT_FAILED, _("realloc: start and end chunk sizes differ"), file, line);
+
+#ifdef MALLOC_WATCH
+  if (_malloc_nwatch > 0)
+    _malloc_ckwatch (p + 1, file, line, W_REALLOC, n);
+#endif
+#ifdef MALLOC_STATS
+  _mstats.bytesreq += (n < tocopy) ? 0 : n - tocopy;
+#endif
+
+  /* If we're reallocating to the same size as previously, return now */
+  if (n == p->mh_nbytes)
+    return mem;
+
+  /* See if desired size rounds to same power of 2 as actual size. */
+  nbytes = ALLOCATED_BYTES(n);
+
+  /* If ok, use the same block, just marking its size as changed.  */
+  if (RIGHT_BUCKET(nbytes, nunits) || RIGHT_BUCKET(nbytes, nunits-1))
+    {
+      /* Compensate for increment above. */
+      m -= 4;
+
+      *m++ = 0;  *m++ = 0;  *m++ = 0;  *m++ = 0;
+      m = (char *)mem + (p->mh_nbytes = n);
+
+      mg.i = n;
+      z = mg.s;
+      *m++ = *z++, *m++ = *z++, *m++ = *z++, *m++ = *z++;      
+
+      return mem;
+    }
+
+  if (n < tocopy)
+    tocopy = n;
+
+#ifdef MALLOC_STATS
+  _mstats.nrcopy++;
+#endif
+
+  /* If we are using mmap and have mremap, we could use it here. */
+
+  if ((m = internal_malloc (n, file, line, MALLOC_INTERNAL|MALLOC_NOTRACE|MALLOC_NOREG)) == 0)
+    return 0;
+  FASTCOPY (mem, m, tocopy);
+  internal_free (mem, file, line, MALLOC_INTERNAL);
+
+#ifdef MALLOC_TRACE
+  if (malloc_trace && (flags & MALLOC_NOTRACE) == 0)
+    mtrace_alloc ("realloc", m, n, file, line);
+  else if (_malloc_trace_buckets[nunits])
+    mtrace_alloc ("realloc", m, n, file, line);
+#endif
+
+#ifdef MALLOC_REGISTER
+  if (malloc_register && (flags & MALLOC_NOREG) == 0)
+    mregister_alloc ("realloc", m, n, file, line);
+#endif
+
+#ifdef MALLOC_WATCH
+  if (_malloc_nwatch > 0)
+    _malloc_ckwatch (m, file, line, W_RESIZED, n);
+#endif
+
+  return m;
+}
+
+static PTR_T
+internal_memalign (alignment, size, file, line, flags)
+     size_t alignment;
+     size_t size;
+     const char *file;
+     int line, flags;
+{
+  register char *ptr;
+  register char *aligned;
+  register union mhead *p;
+
+  ptr = internal_malloc (size + alignment, file, line, MALLOC_INTERNAL);
+
+  if (ptr == 0)
+    return 0;
+  /* If entire block has the desired alignment, just accept it.  */
+  if (((long) ptr & (alignment - 1)) == 0)
+    return ptr;
+  /* Otherwise, get address of byte in the block that has that alignment.  */
+  aligned = (char *) (((long) ptr + alignment - 1) & (~alignment + 1));
+
+  /* Store a suitable indication of how to free the block,
+     so that free can find the true beginning of it.  */
+  p = (union mhead *) aligned - 1;
+  p->mh_nbytes = aligned - ptr;
+  p->mh_alloc = ISMEMALIGN;
+
+  return aligned;
+}
+
+int
+posix_memalign (memptr, alignment, size)
+     void **memptr;
+     size_t alignment, size;
+{
+  void *mem;
+
+  /* Perform posix-mandated error checking here */
+  if ((alignment % sizeof (void *) != 0) || alignment == 0)
+    return EINVAL;
+  else if (powerof2 (alignment) == 0)
+    return EINVAL;
+
+  mem = internal_memalign (alignment, size, (char *)0, 0, 0);
+  if (mem != 0)
+    {
+      *memptr = mem;
+      return 0;
+    }
+  return ENOMEM;
+}
+
+size_t
+malloc_usable_size (mem)
+     void *mem;
+{
+  register union mhead *p;
+  register char *ap;
+  register int maxbytes;
+
+
+  if ((ap = (char *)mem) == 0)
+    return 0;
+
+  /* Find the true start of the memory block to discover which bin */
+  p = (union mhead *) ap - 1;
+  if (p->mh_alloc == ISMEMALIGN)
+    {
+      ap -= p->mh_nbytes;
+      p = (union mhead *) ap - 1;
+    }
+
+  /* XXX - should we return 0 if ISFREE? */
+  maxbytes = binsize(p->mh_index);
+
+  /* So the usable size is the maximum number of bytes in the bin less the
+     malloc overhead */
+  maxbytes -= MOVERHEAD + MSLOP;
+  return (maxbytes);
+}
+
+#if !defined (NO_VALLOC)
+/* This runs into trouble with getpagesize on HPUX, and Multimax machines.
+   Patching out seems cleaner than the ugly fix needed.  */
+static PTR_T
+internal_valloc (size, file, line, flags)
+     size_t size;
+     const char *file;
+     int line, flags;
+{
+  return internal_memalign (getpagesize (), size, file, line, flags|MALLOC_INTERNAL);
+}
+#endif /* !NO_VALLOC */
+
+#ifndef NO_CALLOC
+static PTR_T
+internal_calloc (n, s, file, line, flags)
+     size_t n, s;
+     const char *file;
+     int line, flags;
+{
+  size_t total;
+  PTR_T result;
+
+  total = n * s;
+  result = internal_malloc (total, file, line, flags|MALLOC_INTERNAL);
+  if (result)
+    memset (result, 0, total);
+  return result;  
+}
+
+static void
+internal_cfree (p, file, line, flags)
+     PTR_T p;
+     const char *file;
+     int line, flags;
+{
+  internal_free (p, file, line, flags|MALLOC_INTERNAL);
+}
+#endif /* !NO_CALLOC */
+
+#ifdef MALLOC_STATS
+int
+malloc_free_blocks (size)
+     int size;
+{
+  int nfree;
+  register union mhead *p;
+
+  nfree = 0;
+  for (p = nextf[size]; p; p = CHAIN (p))
+    nfree++;
+
+  return nfree;
+}
+#endif
+
+#if defined (MALLOC_WRAPFUNCS)
+PTR_T
+sh_malloc (bytes, file, line)
+     size_t bytes;
+     const char *file;
+     int line;
+{
+  return internal_malloc (bytes, file, line, MALLOC_WRAPPER);
+}
+
+PTR_T
+sh_realloc (ptr, size, file, line)
+     PTR_T ptr;
+     size_t size;
+     const char *file;
+     int line;
+{
+  return internal_realloc (ptr, size, file, line, MALLOC_WRAPPER);
+}
+
+void
+sh_free (mem, file, line)
+     PTR_T mem;
+     const char *file;
+     int line;
+{
+  internal_free (mem, file, line, MALLOC_WRAPPER);
+}
+
+PTR_T
+sh_memalign (alignment, size, file, line)
+     size_t alignment;
+     size_t size;
+     const char *file;
+     int line;
+{
+  return internal_memalign (alignment, size, file, line, MALLOC_WRAPPER);
+}
+
+#ifndef NO_CALLOC
+PTR_T
+sh_calloc (n, s, file, line)
+     size_t n, s;
+     const char *file;
+     int line;
+{
+  return internal_calloc (n, s, file, line, MALLOC_WRAPPER);
+}
+
+void
+sh_cfree (mem, file, line)
+     PTR_T mem;
+     const char *file;
+     int line;
+{
+  internal_cfree (mem, file, line, MALLOC_WRAPPER);
+}
+#endif
+
+#ifndef NO_VALLOC
+PTR_T
+sh_valloc (size, file, line)
+     size_t size;
+     const char *file;
+     int line;
+{
+  return internal_valloc (size, file, line, MALLOC_WRAPPER);
+}
+#endif /* !NO_VALLOC */
+
+#endif /* MALLOC_WRAPFUNCS */
+
+/* Externally-available functions that call their internal counterparts. */
+
+PTR_T
+malloc (size)
+     size_t size;
+{
+  return internal_malloc (size, (char *)NULL, 0, 0);
+}
+
+PTR_T
+realloc (mem, nbytes)
+     PTR_T mem;
+     size_t nbytes;
+{
+  return internal_realloc (mem, nbytes, (char *)NULL, 0, 0);
+}
+
+void
+free (mem)
+     PTR_T mem;
+{
+  internal_free (mem,  (char *)NULL, 0, 0);
+}
+
+PTR_T
+memalign (alignment, size)
+     size_t alignment;
+     size_t size;
+{
+  return internal_memalign (alignment, size, (char *)NULL, 0, 0);
+}
+
+#ifndef NO_VALLOC
+PTR_T
+valloc (size)
+     size_t size;
+{
+  return internal_valloc (size, (char *)NULL, 0, 0);
+}
+#endif
+
+#ifndef NO_CALLOC
+PTR_T
+calloc (n, s)
+     size_t n, s;
+{
+  return internal_calloc (n, s, (char *)NULL, 0, 0);
+}
+
+void
+cfree (mem)
+     PTR_T mem;
+{
+  internal_cfree (mem, (char *)NULL, 0, 0);
+}
+#endif
diff --git a/lib/malloc/mstats.h b/lib/malloc/mstats.h
new file mode 100644
index 0000000..ce8aaec
--- /dev/null
+++ b/lib/malloc/mstats.h
@@ -0,0 +1,114 @@
+/* mstats.h - definitions for malloc statistics */
+
+/*  Copyright (C) 2001-2020 Free Software Foundation, Inc.
+
+    This file is part of GNU Bash, the Bourne-Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _MSTATS_H
+#define _MSTATS_H
+
+#include "imalloc.h"
+
+#ifdef MALLOC_STATS
+
+/* This needs to change if the definition in malloc.c changes */
+#ifndef NBUCKETS
+#  define NBUCKETS 30
+#endif
+
+/*
+ * NMALLOC[i] is the difference between the number of mallocs and frees
+ * for a given block size.  TMALLOC[i] is the total number of mallocs for
+ * a given block size.  NMORECORE[i] is the total number of calls to
+ * morecore(i).  NLESSCORE[i] is the total number of calls to lesscore(i).
+ *
+ * NMAL and NFRE are counts of the number of calls to malloc() and free(),
+ * respectively.  NREALLOC is the total number of calls to realloc();
+ * NRCOPY is the number of times realloc() had to allocate new memory and
+ * copy to it.  NRECURSE is a count of the number of recursive calls to
+ * malloc() for the same bucket size, which can be caused by calls to
+ * malloc() from a signal handler.
+ *
+ * NSBRK is the number of calls to sbrk() (whether by morecore() or for
+ * alignment); TSBRK is the total number of bytes requested from the kernel
+ * with sbrk().
+ *
+ * BYTESUSED is the total number of bytes consumed by blocks currently in
+ * use; BYTESFREE is the total number of bytes currently on all of the free
+ * lists.  BYTESREQ is the total number of bytes requested by the caller
+ * via calls to malloc() and realloc().
+ *
+ * TBSPLIT is the number of times a larger block was split to satisfy a
+ * smaller request. NSPLIT[i] is the number of times a block of size I was
+ * split.
+ *
+ * TBCOALESCE is the number of times two adjacent smaller blocks off the free
+ * list were combined to satisfy a larger request.
+ */
+struct _malstats {
+  int nmalloc[NBUCKETS];
+  int tmalloc[NBUCKETS];
+  int nmorecore[NBUCKETS];
+  int nlesscore[NBUCKETS];
+  int nmal;
+  int nfre;
+  int nrealloc;
+  int nrcopy;
+  int nrecurse;
+  int nsbrk;
+  bits32_t tsbrk;
+  bits32_t bytesused;
+  bits32_t bytesfree;
+  u_bits32_t bytesreq;
+  int tbsplit;
+  int nsplit[NBUCKETS];
+  int tbcoalesce;
+  int ncoalesce[NBUCKETS];
+  int nmmap;
+  bits32_t tmmap;
+};
+
+/* Return statistics describing allocation of blocks of size BLOCKSIZE.
+   NFREE is the number of free blocks for this allocation size.  NUSED
+   is the number of blocks in use.  NMAL is the number of requests for
+   blocks of size BLOCKSIZE.  NMORECORE is the number of times we had
+   to call MORECORE to repopulate the free list for this bucket.
+   NLESSCORE is the number of times we gave memory back to the system
+   from this bucket.  NSPLIT is the number of times a block of this size
+   was split to satisfy a smaller request.  NCOALESCE is the number of
+   times two blocks of this size were combined to satisfy a larger
+   request. */
+struct bucket_stats {
+  u_bits32_t blocksize;
+  int nfree;
+  int nused;
+  int nmal;
+  int nmorecore;
+  int nlesscore;
+  int nsplit;
+  int ncoalesce;
+  int nmmap;		/* currently unused */
+};
+
+extern struct bucket_stats malloc_bucket_stats PARAMS((int));
+extern struct _malstats malloc_stats PARAMS((void));
+extern void print_malloc_stats PARAMS((char *));
+extern void trace_malloc_stats PARAMS((char *, char *));
+
+#endif /* MALLOC_STATS */
+
+#endif /* _MSTATS_H */
diff --git a/lib/malloc/shmalloc.h b/lib/malloc/shmalloc.h
new file mode 100644
index 0000000..d51193e
--- /dev/null
+++ b/lib/malloc/shmalloc.h
@@ -0,0 +1,70 @@
+/* Functions (currently) for use by the shell to do malloc debugging and
+   tracking. */
+/* Copyright (C) 2001-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne-Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _SH_MALLOC_H
+#define _SH_MALLOC_H
+
+#ifndef PARAMS
+#  if defined (__STDC__) || defined (__GNUC__) || defined (__cplusplus)
+#    define PARAMS(protos) protos
+#  else
+#    define PARAMS(protos) ()
+#  endif
+#endif
+
+/* Generic pointer type. */
+#ifndef PTR_T
+
+#if defined (__STDC__)
+#  define PTR_T void *
+#else
+#  define PTR_T char *
+#endif
+
+#endif /* PTR_T */
+
+
+extern PTR_T sh_malloc PARAMS((size_t, const char *, int));
+extern PTR_T sh_realloc PARAMS((PTR_T, size_t, const char *, int));
+extern void sh_free PARAMS((PTR_T, const char *, int));
+
+extern PTR_T sh_memalign PARAMS((size_t, size_t, const char *, int));
+
+extern PTR_T sh_calloc PARAMS((size_t, size_t, const char *, int));
+extern void sh_cfree PARAMS((PTR_T, const char *, int));
+
+extern PTR_T sh_valloc PARAMS((size_t, const char *, int));
+
+/* trace.c */
+extern int malloc_set_trace PARAMS((int));
+extern void malloc_set_tracefp ();	/* full prototype requires stdio.h */
+extern void malloc_set_tracefn PARAMS((char *, char *));
+
+/* table.c */
+extern void mregister_dump_table PARAMS((void));
+extern void mregister_table_init PARAMS((void));
+extern int malloc_set_register PARAMS((int));
+
+/* stats.c */
+extern void print_malloc_stats PARAMS((char *));
+extern void fprint_malloc_stats ();	/* full prototype requires stdio.h */
+extern void trace_malloc_stats PARAMS((char *, char *));
+
+#endif
diff --git a/lib/malloc/stats.c b/lib/malloc/stats.c
new file mode 100644
index 0000000..b38df9f
--- /dev/null
+++ b/lib/malloc/stats.c
@@ -0,0 +1,213 @@
+/* stats.c - malloc statistics */
+
+/*  Copyright (C) 2001-2020 Free Software Foundation, Inc.
+
+    This file is part of GNU Bash, the Bourne-Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef HAVE_CONFIG_H
+#  include <config.h>
+#endif
+
+#include "imalloc.h"
+
+#ifdef MALLOC_STATS
+
+#include <stdio.h>
+#ifdef HAVE_UNISTD_H
+#  include <unistd.h>
+#endif
+#include <string.h>
+
+#include "mstats.h"
+
+extern int malloc_free_blocks PARAMS((int));
+
+extern int malloc_mmap_threshold;
+
+extern struct _malstats _mstats;
+
+extern FILE *_imalloc_fopen PARAMS((char *, char *, char *, char *, size_t));
+
+struct bucket_stats
+malloc_bucket_stats (size)
+     int size;
+{
+  struct bucket_stats v;
+
+  v.nfree = 0;
+
+  if (size < 0 || size >= NBUCKETS)
+    {
+      v.blocksize = 0;
+      v.nused = v.nmal = v.nmorecore = v.nlesscore = v.nsplit = 0;
+      return v;
+    }
+
+  v.blocksize = 1 << (size + 3);
+  v.nused = _mstats.nmalloc[size];
+  v.nmal = _mstats.tmalloc[size];
+  v.nmorecore = _mstats.nmorecore[size];
+  v.nlesscore = _mstats.nlesscore[size];
+  v.nsplit = _mstats.nsplit[size];
+  v.ncoalesce = _mstats.ncoalesce[size];
+
+  v.nfree = malloc_free_blocks (size);	/* call back to malloc.c */
+
+  return v;
+}
+
+/* Return a copy of _MSTATS, with two additional fields filled in:
+   BYTESFREE is the total number of bytes on free lists.  BYTESUSED
+   is the total number of bytes in use.  These two fields are fairly
+   expensive to compute, so we do it only when asked to. */
+struct _malstats
+malloc_stats ()
+{
+  struct _malstats result;
+  struct bucket_stats v;
+  register int i;
+
+  result = _mstats;
+  result.bytesused = result.bytesfree = 0;
+  for (i = 0; i < NBUCKETS; i++)
+    {
+      v = malloc_bucket_stats (i);
+      result.bytesfree += v.nfree * v.blocksize;
+      result.bytesused += v.nused * v.blocksize;
+    }
+  return (result);
+}
+
+static void
+_print_malloc_stats (s, fp)
+     char *s;
+     FILE *fp;
+{
+  register int i;
+  unsigned long totused, totfree;
+  struct bucket_stats v;
+
+  fprintf (fp, "Memory allocation statistics: %s\n    size\tfree\tin use\ttotal\tmorecore lesscore split\tcoalesce\n", s ? s : "");
+  for (i = totused = totfree = 0; i < NBUCKETS; i++)
+    {
+      v = malloc_bucket_stats (i);
+      /* Show where the mmap threshold is; sizes greater than this use mmap to
+	 allocate and munmap to free (munmap shows up as lesscore). */
+      if (i == malloc_mmap_threshold+1)
+	fprintf (fp, "--------\n");
+      if (v.nmal > 0)
+	fprintf (fp, "%8lu\t%4d\t%6d\t%5d%8d\t%8d %5d %8d\n", (unsigned long)v.blocksize, v.nfree, v.nused, v.nmal, v.nmorecore, v.nlesscore, v.nsplit, v.ncoalesce);
+      totfree += v.nfree * v.blocksize;
+      totused += v.nused * v.blocksize;
+    }
+  fprintf (fp, "\nTotal bytes in use: %lu, total bytes free: %lu\n",
+	   totused, totfree);
+  fprintf (fp, "\nTotal bytes requested by application: %lu\n", (unsigned long)_mstats.bytesreq);
+  fprintf (fp, "Total mallocs: %d, total frees: %d, total reallocs: %d (%d copies)\n",
+	   _mstats.nmal, _mstats.nfre, _mstats.nrealloc, _mstats.nrcopy);
+  fprintf (fp, "Total sbrks: %d, total bytes via sbrk: %d\n",
+  	   _mstats.nsbrk, _mstats.tsbrk);
+  fprintf (fp, "Total mmaps: %d, total bytes via mmap: %d\n",
+  	   _mstats.nmmap, _mstats.tmmap);
+  fprintf (fp, "Total blocks split: %d, total block coalesces: %d\n",
+  	   _mstats.tbsplit, _mstats.tbcoalesce);
+}
+
+void
+print_malloc_stats (s)
+     char *s;
+{
+  _print_malloc_stats (s, stderr);
+}
+
+void
+fprint_malloc_stats (s, fp)
+     char *s;
+     FILE *fp;
+{
+  _print_malloc_stats (s, fp);
+}
+
+#define TRACEROOT "/var/tmp/maltrace/stats."
+
+void
+trace_malloc_stats (s, fn)
+     char *s, *fn;
+{
+  FILE *fp;
+  char defname[sizeof (TRACEROOT) + 64];
+  static char mallbuf[1024];
+
+  fp = _imalloc_fopen (s, fn, TRACEROOT, defname, sizeof (defname));
+  if (fp)
+    {
+      setvbuf (fp, mallbuf, _IOFBF, sizeof (mallbuf));
+      _print_malloc_stats (s, fp);
+      fflush(fp);
+      fclose(fp);
+    }
+}
+
+#endif /* MALLOC_STATS */
+
+#if defined (MALLOC_STATS) || defined (MALLOC_TRACE)
+FILE *
+_imalloc_fopen (s, fn, def, defbuf, defsiz)
+     char *s;
+     char *fn;
+     char *def;
+     char *defbuf;
+     size_t defsiz;
+{
+  char fname[1024];
+  long l;
+  FILE *fp;
+
+  l = (long)getpid ();
+  if (fn == 0)
+    {
+      sprintf (defbuf, "%s%ld", def, l);
+      fp = fopen(defbuf, "w");
+    }
+  else
+    {
+      char *p, *q, *r;
+      char pidbuf[32];
+      int sp;
+
+      sprintf (pidbuf, "%ld", l);
+      if ((strlen (pidbuf) + strlen (fn) + 2) >= sizeof (fname))
+	return ((FILE *)0);
+      for (sp = 0, p = fname, q = fn; *q; )
+	{
+	  if (sp == 0 && *q == '%' && q[1] == 'p')
+	    {
+	      sp = 1;
+	      for (r = pidbuf; *r; )
+		*p++ = *r++;
+	      q += 2;
+	    }
+	  else
+	    *p++ = *q++;
+	}
+      *p = '\0';
+      fp = fopen (fname, "w");
+    }
+
+  return fp;
+}
+#endif /* MALLOC_STATS || MALLOC_TRACE */
diff --git a/lib/malloc/stub.c b/lib/malloc/stub.c
new file mode 100644
index 0000000..a60a624
--- /dev/null
+++ b/lib/malloc/stub.c
@@ -0,0 +1,22 @@
+/* Copyright (C) 1993-2003 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+void
+bash_malloc_stub()
+{
+}
diff --git a/lib/malloc/table.c b/lib/malloc/table.c
new file mode 100644
index 0000000..e6acbf4
--- /dev/null
+++ b/lib/malloc/table.c
@@ -0,0 +1,429 @@
+/* table.c - bookkeeping functions for allocated memory */
+
+/* Copyright (C) 2001-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef HAVE_CONFIG_H
+#  include <config.h>
+#endif
+
+#include <stdio.h>
+#include <string.h>
+
+#include "imalloc.h"
+#include "table.h"
+
+#ifdef SHELL
+extern int running_trap;
+extern int signal_is_trapped PARAMS((int));
+#endif
+
+extern int malloc_register;
+
+#ifdef MALLOC_REGISTER
+
+extern FILE *_imalloc_fopen PARAMS((char *, char *, char *, char *, size_t));
+
+#define FIND_ALLOC	0x01	/* find slot for new allocation */
+#define FIND_EXIST	0x02	/* find slot for existing entry for free() or search */
+
+static int table_count = 0;
+static int table_allocated = 0;
+static int table_bucket_index = REG_TABLE_SIZE-1;
+static mr_table_t mem_table[REG_TABLE_SIZE];
+static mr_table_t mem_overflow;
+
+#ifndef STREQ
+#define STREQ(a, b) ((a)[0] == (b)[0] && strcmp(a, b) == 0)
+#endif
+
+static int location_table_index = 0;
+static int location_table_count = 0;
+static ma_table_t mlocation_table[REG_TABLE_SIZE];
+
+/*
+ * NOTE: taken from dmalloc (http://dmalloc.com) and modified.
+ */
+static unsigned int
+mt_hash (key)
+     const PTR_T key;
+{
+  unsigned int a, b, c;
+  unsigned long x;
+
+  /* set up the internal state */
+  a = 0x9e3779b9;	/* the golden ratio; an arbitrary value */
+  x = (unsigned long)key;		/* truncation is OK */
+  b = x >> 8;
+  c = x >> 3;				/* XXX - was >> 4 */
+
+  HASH_MIX(a, b, c);
+  return c;
+}
+
+#if 0
+static unsigned int
+which_bucket (mem)
+     PTR_T mem;
+{
+  return (mt_hash ((unsigned char *)mem) & (REG_TABLE_SIZE-1));
+}
+
+#else
+#define which_bucket(mem) (mt_hash ((unsigned char *)(mem)) & (REG_TABLE_SIZE-1));
+
+#define next_bucket()	((table_bucket_index + 1) & (REG_TABLE_SIZE-1))
+#define next_entry(mem)	((mem == mem_table + REG_TABLE_SIZE - 1) ? mem_table : ++mem)
+
+#define prev_bucket()	(table_bucket_index == 0 ? REG_TABLE_SIZE-1 : table_bucket_index-1)
+#define prev_entry(mem)	((mem == mem_table) ? mem_table + REG_TABLE_SIZE - 1 : mem - 1)
+#endif
+
+static mr_table_t *
+find_entry (mem, flags)
+     PTR_T mem;
+     int flags;
+{
+  unsigned int bucket;
+  register mr_table_t *tp;
+  mr_table_t *endp;
+
+  if (mem_overflow.mem == mem)
+    return (&mem_overflow);
+
+  /* If we want to insert an allocation entry just use the next slot */
+  if (flags & FIND_ALLOC)
+    {
+      table_bucket_index = next_bucket();
+      table_count++;
+      tp = mem_table + table_bucket_index;
+      memset(tp, 0, sizeof (mr_table_t));	/* overwrite next existing entry */
+      return tp;
+    }
+    
+  tp = endp = mem_table + table_bucket_index;
+
+  /* search for last allocation corresponding to MEM, return entry pointer */
+  while (1)
+    {
+      if (tp->mem == mem)
+	return (tp);
+
+      tp = prev_entry (tp);
+
+      /* if we went all the way around and didn't find it, return NULL */
+      if (tp == endp)
+        return ((mr_table_t *)NULL);
+    }
+
+  return (mr_table_t *)NULL;
+}
+
+mr_table_t *
+mr_table_entry (mem)
+     PTR_T mem;
+{
+  return (find_entry (mem, FIND_EXIST));
+}
+
+void
+mregister_describe_mem (mem, fp)
+     PTR_T mem;
+     FILE *fp;
+{
+  mr_table_t *entry;
+
+  entry = find_entry (mem, FIND_EXIST);
+  if (entry == 0)
+    return;
+  fprintf (fp, "malloc: %p: %s: last %s from %s:%d\n",
+  		mem,
+		(entry->flags & MT_ALLOC) ? "allocated" : "free",
+		(entry->flags & MT_ALLOC) ? "allocated" : "freed",
+		entry->file ? entry->file : "unknown",
+		entry->line);
+}
+
+void
+mregister_alloc (tag, mem, size, file, line)
+     const char *tag;
+     PTR_T mem;
+     size_t size;
+     const char *file;
+     int line;
+{
+  mr_table_t *tentry;
+  sigset_t set, oset;
+  int blocked_sigs;
+
+  /* Block all signals in case we are executed from a signal handler. */
+  blocked_sigs = 0;
+#ifdef SHELL
+  if (running_trap || signal_is_trapped (SIGINT) || signal_is_trapped (SIGCHLD))
+#endif
+    {
+      _malloc_block_signals (&set, &oset);
+      blocked_sigs = 1;
+    }
+
+  mlocation_register_alloc (file, line);
+
+  tentry = find_entry (mem, FIND_ALLOC);
+
+  if (tentry == 0)
+    {
+      /* oops.  table is full.  punt. */
+      fprintf (stderr, _("register_alloc: alloc table is full with FIND_ALLOC?\n"));
+      if (blocked_sigs)
+	_malloc_unblock_signals (&set, &oset);
+      return;
+    }
+  
+  if (tentry->flags & MT_ALLOC)
+    {
+      /* oops.  bad bookkeeping. ignore for now */
+      fprintf (stderr, _("register_alloc: %p already in table as allocated?\n"), mem);
+    }
+
+  tentry->mem = mem;
+  tentry->size = size;
+  tentry->func = tag;
+  tentry->flags = MT_ALLOC;
+  tentry->file = file;
+  tentry->line = line;
+  tentry->nalloc++;
+
+  if (tentry != &mem_overflow)
+    table_allocated++;
+
+  if (blocked_sigs)
+    _malloc_unblock_signals (&set, &oset);
+}
+
+void
+mregister_free (mem, size, file, line)
+     PTR_T mem;
+     int size;
+     const char *file;
+     int line;
+{
+  mr_table_t *tentry;
+  sigset_t set, oset;
+  int blocked_sigs;
+
+  /* Block all signals in case we are executed from a signal handler. */
+  blocked_sigs = 0;
+#ifdef SHELL
+  if (running_trap || signal_is_trapped (SIGINT) || signal_is_trapped (SIGCHLD))
+#endif
+    {
+      _malloc_block_signals (&set, &oset);
+      blocked_sigs = 1;
+    }
+
+  tentry = find_entry (mem, FIND_EXIST);
+  if (tentry == 0)
+    {
+      /* oops.  not found. */
+#if 0
+      fprintf (stderr, "register_free: %p not in allocation table?\n", mem);
+#endif
+      if (blocked_sigs)
+	_malloc_unblock_signals (&set, &oset);
+      return;
+    }
+  if (tentry->flags & MT_FREE)
+    {
+      /* oops.  bad bookkeeping. ignore for now */
+      fprintf (stderr, _("register_free: %p already in table as free?\n"), mem);
+    }
+    	
+  tentry->flags = MT_FREE;
+  tentry->func = "free";
+  tentry->file = file;
+  tentry->line = line;
+  tentry->nfree++;
+
+  if (tentry != &mem_overflow)
+    table_allocated--;
+
+  if (blocked_sigs)
+    _malloc_unblock_signals (&set, &oset);
+}
+
+/* If we ever add more flags, this will require changes. */
+static char *
+_entry_flags(x)
+     int x;
+{
+  if (x & MT_FREE)
+    return "free";
+  else if (x & MT_ALLOC)
+    return "allocated";
+  else
+    return "undetermined?";
+}
+
+static void
+_register_dump_table(fp)
+     FILE *fp;
+{
+  register int i;
+  mr_table_t entry;
+
+  for (i = 0; i < REG_TABLE_SIZE; i++)
+    {
+      entry = mem_table[i];
+      if (entry.mem)
+	fprintf (fp, "%s[%d] %p:%zu:%s:%s:%s:%d:%d:%d\n",
+						(i == table_bucket_index) ? "*" : "",
+						i,
+						entry.mem, entry.size,
+						_entry_flags(entry.flags),
+						entry.func ? entry.func : "unknown",
+						entry.file ? entry.file : "unknown",
+						entry.line,
+						entry.nalloc, entry.nfree);
+    }
+}
+ 
+void
+mregister_dump_table()
+{
+  _register_dump_table (stderr);
+}
+
+void
+mregister_table_init ()
+{
+  memset (mem_table, 0, sizeof(mr_table_t) * REG_TABLE_SIZE);
+  memset (&mem_overflow, 0, sizeof (mr_table_t));
+  table_count = 0;
+}
+
+/* Simple for now */
+
+static ma_table_t *
+find_location_entry (file, line)
+     const char *file;
+     int line;
+{
+  register ma_table_t *tp, *endp;
+
+  endp = mlocation_table + location_table_count;
+  for (tp = mlocation_table; tp <= endp; tp++)
+    {
+      if (tp->line == line && STREQ (file, tp->file))
+        return tp;
+    }
+  return (ma_table_t *)NULL;
+}
+
+void
+mlocation_register_alloc (file, line)
+     const char *file;
+     int line;
+{
+  ma_table_t *lentry;
+  const char *nfile;
+
+  if (file == 0)
+    {
+      mlocation_table[0].nalloc++;
+      return;
+    }
+
+  nfile = strrchr (file, '/');
+  if (nfile)
+    nfile++;
+  else
+    nfile = file;
+
+  lentry = find_location_entry (nfile, line);
+  if (lentry == 0)
+    {
+      location_table_index++;
+      if (location_table_index == REG_TABLE_SIZE)
+        location_table_index = 1;	/* slot 0 reserved */
+      lentry = mlocation_table + location_table_index;
+      lentry->file = nfile;
+      lentry->line = line;
+      lentry->nalloc = 1;
+      if (location_table_count < REG_TABLE_SIZE)
+	location_table_count++;		/* clamp at REG_TABLE_SIZE for now */
+    }
+  else
+    lentry->nalloc++;
+}
+
+static void
+_location_dump_table (fp)
+     FILE *fp;
+{
+  register ma_table_t *tp, *endp;
+
+  endp = mlocation_table + location_table_count;
+  for (tp = mlocation_table; tp < endp; tp++)
+    fprintf (fp, "%s:%d\t%d\n", tp->file ? tp->file : "unknown",
+				tp->line ? tp->line : 0,
+				tp->nalloc);
+}
+
+void
+mlocation_dump_table ()
+{
+  _location_dump_table (stderr);
+}
+
+#define LOCROOT "/var/tmp/maltrace/locations."
+
+void
+mlocation_write_table ()
+{
+  FILE *fp;
+  char defname[sizeof (LOCROOT) + 64];
+
+  fp = _imalloc_fopen ((char *)NULL, (char *)NULL, LOCROOT, defname, sizeof (defname));
+  if (fp == 0)
+    return;		/* XXX - no error message yet */
+  _location_dump_table (fp);
+  fclose (fp);
+}
+
+void
+mlocation_table_init ()
+{
+  memset (mlocation_table, 0, sizeof (ma_table_t) * REG_TABLE_SIZE);
+  mlocation_table[0].file = "";		/* reserve slot 0 for unknown locations */
+  mlocation_table[0].line = 0;
+  mlocation_table[0].nalloc = 0;
+  location_table_count = 1;
+}
+
+#endif /* MALLOC_REGISTER */
+
+int
+malloc_set_register(n)
+     int n;
+{
+  int old;
+
+  old = malloc_register;
+  malloc_register = n;
+  return old;
+}
diff --git a/lib/malloc/table.h b/lib/malloc/table.h
new file mode 100644
index 0000000..92866cf
--- /dev/null
+++ b/lib/malloc/table.h
@@ -0,0 +1,116 @@
+/* table.h - definitions for tables for keeping track of allocated memory */
+
+/*  Copyright (C) 2001-2020 Free Software Foundation, Inc.
+
+    This file is part of GNU Bash, the Bourne-Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _MTABLE_H
+#define _MTABLE_H
+
+#include "imalloc.h"
+
+#ifdef MALLOC_REGISTER
+
+/* values for flags byte. */
+#define MT_ALLOC	0x01
+#define MT_FREE		0x02
+
+/*
+ * Memory table entry.
+ *
+ * MEM is the address of the allocated pointer.
+ * SIZE is the requested allocation size.
+ * FLAGS includes either MT_ALLOC (MEM is allocated) or MT_FREE (MEM is
+ * not allocated).  Other flags later.
+ * FUNC is set to the name of the function doing the allocation (from the
+ * `tag' argument to register_alloc().
+ * FILE and LINE are the filename and line number of the last allocation
+ * and free (depending on STATUS) of MEM.
+ * NALLOC and NFREE are incremented on each allocation that returns MEM or
+ * each free of MEM, respectively (way to keep track of memory reuse
+ * and how well the free lists are working).
+ *
+ */
+typedef struct mr_table {
+	PTR_T mem;
+	size_t size;
+	char flags;
+	const char *func;
+	const char *file;
+	int line;
+	int nalloc, nfree;
+} mr_table_t;
+
+#define REG_TABLE_SIZE	8192
+
+extern mr_table_t *mr_table_entry PARAMS((PTR_T));
+extern void mregister_alloc PARAMS((const char *, PTR_T, size_t, const char *, int));
+extern void mregister_free PARAMS((PTR_T, int, const char *, int));
+extern void mregister_describe_mem ();
+extern void mregister_dump_table PARAMS((void));
+extern void mregister_table_init PARAMS((void));
+
+typedef struct ma_table {
+	const char *file;
+	int line;
+	int nalloc;
+} ma_table_t;
+
+extern void mlocation_register_alloc PARAMS((const char *, int));
+extern void mlocation_table_init PARAMS((void));
+extern void mlocation_dump_table PARAMS((void));
+extern void mlocation_write_table PARAMS((void));
+
+/* NOTE:  HASH_MIX taken from dmalloc (http://dmalloc.com) */
+
+/*
+ * void HASH_MIX
+ *
+ * DESCRIPTION:
+ *
+ * Mix 3 32-bit values reversibly.  For every delta with one or two
+ * bits set, and the deltas of all three high bits or all three low
+ * bits, whether the original value of a,b,c is almost all zero or is
+ * uniformly distributed.
+ *
+ * If HASH_MIX() is run forward or backward, at least 32 bits in a,b,c
+ * have at least 1/4 probability of changing.  If mix() is run
+ * forward, every bit of c will change between 1/3 and 2/3 of the
+ * time.  (Well, 22/100 and 78/100 for some 2-bit deltas.)
+ *
+ * HASH_MIX() takes 36 machine instructions, but only 18 cycles on a
+ * superscalar machine (like a Pentium or a Sparc).  No faster mixer
+ * seems to work, that's the result of my brute-force search.  There
+ * were about 2^68 hashes to choose from.  I only tested about a
+ * billion of those.
+ */
+#define HASH_MIX(a, b, c) \
+ do { \
+   a -= b; a -= c; a ^= (c >> 13); \
+   b -= c; b -= a; b ^= (a << 8); \
+   c -= a; c -= b; c ^= (b >> 13); \
+   a -= b; a -= c; a ^= (c >> 12); \
+   b -= c; b -= a; b ^= (a << 16); \
+   c -= a; c -= b; c ^= (b >> 5); \
+   a -= b; a -= c; a ^= (c >> 3); \
+   b -= c; b -= a; b ^= (a << 10); \
+   c -= a; c -= b; c ^= (b >> 15); \
+ } while(0)
+
+#endif /* MALLOC_REGISTER */
+
+#endif /* _MTABLE_H */
diff --git a/lib/malloc/trace.c b/lib/malloc/trace.c
new file mode 100644
index 0000000..391ca9d
--- /dev/null
+++ b/lib/malloc/trace.c
@@ -0,0 +1,126 @@
+/* trace.c - tracing functions for malloc */
+
+/* Copyright (C) 2001-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef HAVE_CONFIG_H
+#  include <config.h>
+#endif
+
+#include <stdio.h>
+#ifdef HAVE_UNISTD_H
+#  include <unistd.h>
+#endif
+
+#include "imalloc.h"
+
+extern int malloc_trace;
+
+static int _mtrace_verbose = 0;
+
+#ifdef MALLOC_TRACE
+
+extern FILE *_imalloc_fopen PARAMS((char *, char *, char *, char *, size_t));
+
+FILE *_mtrace_fp = NULL;
+extern char _malloc_trace_buckets[];
+
+void
+mtrace_alloc (tag, mem, size, file, line)
+     const char *tag;
+     PTR_T mem;
+     size_t size;
+     const char *file;
+     int line;
+{
+  if (_mtrace_fp == NULL)
+    _mtrace_fp = stderr;
+
+  if (_mtrace_verbose)
+    fprintf (_mtrace_fp, "alloc: %s: %p (%zu bytes) from '%s:%d'\n",
+		tag, mem, size, file ? file : "unknown", line);
+  else
+    fprintf (_mtrace_fp, "alloc:%p:%zu:%s:%d\n",
+		mem, size, file ? file : "unknown", line);
+}
+
+void
+mtrace_free (mem, size, file, line)
+     PTR_T mem;
+     int size;
+     const char *file;
+     int line;
+{
+  if (_mtrace_fp == NULL)
+    _mtrace_fp = stderr;
+
+  if (_mtrace_verbose)
+    fprintf (_mtrace_fp, "free: %p (%d bytes) from '%s:%d'\n",
+		mem, size, file ? file : "unknown", line);
+  else
+    fprintf (_mtrace_fp, "free:%p:%d:%s:%d\n",
+		mem, size, file ? file : "unknown", line);
+}
+#endif /* MALLOC_TRACE */
+
+int
+malloc_set_trace (n)
+     int n;
+{
+  int old;
+
+  old = malloc_trace;
+  malloc_trace = n;
+  _mtrace_verbose = (n > 1);
+  return old;
+}
+
+void
+malloc_set_tracefp (fp)
+     FILE *fp;
+{
+#ifdef MALLOC_TRACE
+  _mtrace_fp = fp ? fp : stderr;
+#endif
+}
+
+void
+malloc_trace_bin (n)
+     int n;
+{
+#ifdef MALLOC_TRACE
+  _malloc_trace_buckets[n] = 1;
+#endif
+}
+
+#define TRACEROOT "/var/tmp/maltrace/trace."
+
+void
+malloc_set_tracefn (s, fn)
+     char *s;
+     char *fn;
+{
+#ifdef MALLOC_TRACE
+  FILE *fp;
+  char defname[sizeof (TRACEROOT) + 64];
+
+  fp = _imalloc_fopen (s, fn, TRACEROOT, defname, sizeof (defname));
+  if (fp)
+    malloc_set_tracefp (fp);
+#endif
+}
diff --git a/lib/malloc/watch.c b/lib/malloc/watch.c
new file mode 100644
index 0000000..00c8a82
--- /dev/null
+++ b/lib/malloc/watch.c
@@ -0,0 +1,151 @@
+/* watch.c - watchpoint functions for malloc */
+
+/* Copyright (C) 2001-2003 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef HAVE_CONFIG_H
+#  include <config.h>
+#endif
+
+#include <stdio.h>
+
+#include "imalloc.h"
+
+#ifdef MALLOC_WATCH
+#include "watch.h"
+
+#define WATCH_MAX	32
+
+int		_malloc_nwatch;
+static PTR_T	_malloc_watch_list[WATCH_MAX];
+
+static void
+watch_warn (addr, file, line, type, data)
+     PTR_T addr;
+     const char *file;
+     int line, type;
+     unsigned long data;
+{
+  char *tag;
+
+  if (type == W_ALLOC)
+    tag = "allocated";
+  else if (type == W_FREE)
+    tag = "freed";
+  else if (type == W_REALLOC)
+    tag = "requesting resize";
+  else if (type == W_RESIZED)
+    tag = "just resized";
+  else
+    tag = "bug: unknown operation";
+
+  fprintf (stderr, "malloc: watch alert: %p %s ", addr, tag);
+  if (data != (unsigned long)-1)
+    fprintf (stderr, "(size %lu) ", data);
+  fprintf (stderr, "from '%s:%d'\n", file ? file : "unknown", line);
+}
+
+void
+_malloc_ckwatch (addr, file, line, type, data)
+     PTR_T addr;
+     const char *file;
+     int line, type;
+     unsigned long data;
+{
+  register int i;
+
+  for (i = _malloc_nwatch - 1; i >= 0; i--)
+    {
+      if (_malloc_watch_list[i] == addr)
+	{
+	  watch_warn (addr, file, line, type, data);
+	  return;
+	}
+    }
+}
+#endif /* MALLOC_WATCH */
+
+PTR_T
+malloc_watch (addr)
+     PTR_T addr;
+{
+  register int i;
+  PTR_T ret;
+
+  if (addr == 0)
+    return addr;
+  ret = (PTR_T)0;
+
+#ifdef MALLOC_WATCH
+  for (i = _malloc_nwatch - 1; i >= 0; i--)
+    {
+      if (_malloc_watch_list[i] == addr)
+        break;
+    }
+  if (i < 0)
+    {
+      if (_malloc_nwatch == WATCH_MAX)	/* full, take out first */
+	{
+	  ret = _malloc_watch_list[0];
+	  _malloc_nwatch--;
+	  for (i = 0; i < _malloc_nwatch; i++)
+	    _malloc_watch_list[i] = _malloc_watch_list[i+1];
+	}
+      _malloc_watch_list[_malloc_nwatch++] = addr;
+    }
+#endif
+
+  return ret;  
+}
+
+/* Remove a watchpoint set on ADDR.  If ADDR is NULL, remove all
+   watchpoints.  Returns ADDR if everything went OK, NULL if ADDR was
+   not being watched. */
+PTR_T
+malloc_unwatch (addr)
+     PTR_T addr;
+{
+#ifdef MALLOC_WATCH
+  register int i;
+
+  if (addr == 0)
+    {
+      for (i = 0; i < _malloc_nwatch; i++)
+        _malloc_watch_list[i] = (PTR_T)0;
+      _malloc_nwatch = 0;
+      return ((PTR_T)0);
+    }
+  else
+    {
+      for (i = 0; i < _malloc_nwatch; i++)
+	{
+	  if (_malloc_watch_list[i] == addr)
+	    break;
+	}
+      if (i == _malloc_nwatch)
+        return ((PTR_T)0);		/* not found */
+      /* shuffle everything from i+1 to end down 1 */
+      _malloc_nwatch--;
+      for ( ; i < _malloc_nwatch; i++)
+        _malloc_watch_list[i] = _malloc_watch_list[i+1];
+      return addr;
+    }
+#else
+  return ((PTR_T)0);
+#endif
+}
diff --git a/lib/malloc/watch.h b/lib/malloc/watch.h
new file mode 100644
index 0000000..2a0f497
--- /dev/null
+++ b/lib/malloc/watch.h
@@ -0,0 +1,41 @@
+/* watch.h - definitions for tables for keeping track of allocated memory */
+
+/*  Copyright (C) 2001-2020 Free Software Foundation, Inc.
+
+    This file is part of GNU Bash, the Bourne-Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _MWATCH_H
+#define _MWATCH_H
+
+#include "imalloc.h"
+
+#ifdef MALLOC_WATCH
+
+/* `Events' for watchpoints */
+
+#define W_ALLOC		0x01
+#define W_FREE		0x02
+#define W_REALLOC	0x04
+#define W_RESIZED	0x08
+
+extern int _malloc_nwatch;
+
+extern void _malloc_ckwatch PARAMS((PTR_T, const char *, int, int, unsigned long));
+                    
+#endif /* MALLOC_WATCH */
+
+#endif /* _MWATCH_H */
diff --git a/lib/malloc/x386-alloca.s b/lib/malloc/x386-alloca.s
new file mode 100644
index 0000000..112d33c
--- /dev/null
+++ b/lib/malloc/x386-alloca.s
@@ -0,0 +1,63 @@
+;; alloca386.s 1.2
+;; GNU-compatible stack allocation function for Xenix/386.
+;; Written by Chip Salzenberg at ComDev.
+;; Last modified 90/01/11
+;;> Is your alloca clearly better than the one in i386-alloca.s?  I haven't
+;;> looked at either.
+;;
+;;They're different because Xenix/386 has a different assembler.  SCO
+;;Xenix has the Microsoft C compiler and the Microsoft macro assembler,
+;;called "masm".  MASM's assembler syntax is quite different from AT&T's
+;;in all sorts of ways.  Xenix people can't use the AT&T version.
+;;-- 
+;;Chip Salzenberg at ComDev/TCT     <chip@tct.uucp>, <uunet!ateng!tct!chip>
+
+	TITLE   $alloca386
+
+	.386
+DGROUP	GROUP	CONST, _BSS, _DATA
+_DATA	SEGMENT  DWORD USE32 PUBLIC 'DATA'
+_DATA      ENDS
+_BSS	SEGMENT  DWORD USE32 PUBLIC 'BSS'
+_BSS      ENDS
+CONST	SEGMENT  DWORD USE32 PUBLIC 'CONST'
+CONST      ENDS
+_TEXT	SEGMENT  DWORD USE32 PUBLIC 'CODE'
+	ASSUME   CS: _TEXT, DS: DGROUP, SS: DGROUP, ES: DGROUP
+
+	PUBLIC  _alloca
+_alloca PROC NEAR
+
+; Get argument.
+	pop     edx             ; edx -> return address
+	pop     eax             ; eax = amount to allocate
+
+; Validate allocation amount.
+	add     eax,3
+	and     eax,not 3
+	cmp     eax,0
+	jg      aa_size_ok
+	mov     eax,4
+aa_size_ok:
+
+; Allocate stack space.
+	mov     ecx,esp         ; ecx -> old stack pointer
+	sub     esp,eax         ; perform allocation
+	mov     eax,esp         ; eax -> new stack pointer
+
+; Copy the three saved register variables from old stack top to new stack top.
+; They may not be there.  So we waste twelve bytes.  Big fat hairy deal.
+	push    DWORD PTR 8[ecx]
+	push    DWORD PTR 4[ecx]
+	push    DWORD PTR 0[ecx]
+
+; Push something so the caller can pop it off.
+	push    eax
+
+; Return to caller.
+	jmp     edx
+
+_alloca ENDP
+
+_TEXT   ENDS
+	END
diff --git a/lib/malloc/xleaktrace b/lib/malloc/xleaktrace
new file mode 100755
index 0000000..d7e3cd5
--- /dev/null
+++ b/lib/malloc/xleaktrace
@@ -0,0 +1,47 @@
+#! /usr/bin/awk -f
+#
+# xleaktrace - print unfreed memory using input generated by compact malloc
+#	       tracing (malloc_set_trace(1))
+#
+# NOTE: we ignore `realloc' tags because they're just extra information
+#
+# Copyright (c) 2001 Chester Ramey
+# Permission is hereby granted to deal in this Software without restriction.
+# THIS SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND.
+#
+# Chet Ramey
+# chet@po.cwru.edu
+#
+BEGIN {
+	FS=":";
+}
+
+$1 == "alloc"	{
+			alloc[$2] = 1;
+
+			size[$2] = $3;
+			file[$2] = $4;
+			line[$2] = $5;
+
+#			printf "allocated: %s %d %d %s %d\n", $2, alloc[$2], size[$2], file[$2], line[$2];
+		}
+
+$1 == "free"	{
+			if ($2 in alloc) {
+				alloc[$2] = 0;
+#				printf "freed: %s %d\n", $2, alloc[$2];
+			} else
+				printf "freeing unallocated pointer: %s\n", $2;
+				
+		}
+
+END {
+	printf "unfreed memory\n";
+	for (ptr in alloc) {
+		if (alloc[ptr] == 1) {
+			printf "%s (%d) from %s:%d\n", ptr, size[ptr], file[ptr], line[ptr];
+		}
+	}
+}
+	
+	
diff --git a/lib/malloc/xmalloc.c b/lib/malloc/xmalloc.c
new file mode 100644
index 0000000..f6dec67
--- /dev/null
+++ b/lib/malloc/xmalloc.c
@@ -0,0 +1,94 @@
+/* xmalloc.c -- safe versions of malloc and realloc */
+
+/* Copyright (C) 1991-2003 Free Software Foundation, Inc.
+
+   This file is part of GNU Readline, a library for reading lines
+   of text with interactive input and history editing.
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if defined (HAVE_CONFIG_H)
+#include <config.h>
+#endif
+
+#include <stdio.h>
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+/* Generic pointer type. */
+#ifndef PTR_T
+
+#if defined (__STDC__)
+#  define PTR_T void *
+#else
+#  define PTR_T char *
+#endif
+
+#endif /* PTR_T */
+
+/* **************************************************************** */
+/*								    */
+/*		   Memory Allocation and Deallocation.		    */
+/*								    */
+/* **************************************************************** */
+
+static void
+memory_error_and_abort (fname)
+     char *fname;
+{
+  fprintf (stderr, "%s: out of virtual memory\n", fname);
+  exit (2);
+}
+
+/* Return a pointer to free()able block of memory large enough
+   to hold BYTES number of bytes.  If the memory cannot be allocated,
+   print an error message and abort. */
+PTR_T
+xmalloc (bytes)
+     size_t bytes;
+{
+  PTR_T temp;
+
+  temp = malloc (bytes);
+  if (temp == 0)
+    memory_error_and_abort ("xmalloc");
+  return (temp);
+}
+
+PTR_T
+xrealloc (pointer, bytes)
+     PTR_T pointer;
+     size_t bytes;
+{
+  PTR_T temp;
+
+  temp = pointer ? realloc (pointer, bytes) : malloc (bytes);
+
+  if (temp == 0)
+    memory_error_and_abort ("xrealloc");
+  return (temp);
+}
+
+void
+xfree (string)
+     PTR_T string;
+{
+  if (string)
+    free (string);
+}
diff --git a/lib/readline/COPYING b/lib/readline/COPYING
new file mode 100644
index 0000000..94a9ed0
--- /dev/null
+++ b/lib/readline/COPYING
@@ -0,0 +1,674 @@
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.  We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors.  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+  To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights.  Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received.  You must make sure that they, too, receive
+or can get the source code.  And you must show them these terms so they
+know their rights.
+
+  Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+  For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software.  For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+  Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so.  This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software.  The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable.  Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products.  If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+  Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary.  To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                       TERMS AND CONDITIONS
+
+  0. Definitions.
+
+  "This License" refers to version 3 of the GNU General Public License.
+
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
+
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+  1. Source Code.
+
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
+
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+  The Corresponding Source for a work in source code form is that
+same work.
+
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+  13. Use with the GNU Affero General Public License.
+
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+  14. Revised Versions of this License.
+
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+  If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+  15. Disclaimer of Warranty.
+
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+  If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
+
+    <program>  Copyright (C) <year>  <name of author>
+    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
+
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+<http://www.gnu.org/licenses/>.
+
+  The GNU General Public License does not permit incorporating your program
+into proprietary programs.  If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.  But first, please read
+<http://www.gnu.org/philosophy/why-not-lgpl.html>.
diff --git a/lib/readline/ChangeLog b/lib/readline/ChangeLog
new file mode 100644
index 0000000..1cf0c00
--- /dev/null
+++ b/lib/readline/ChangeLog
@@ -0,0 +1,403 @@
+Tue Mar 23 14:36:51 1993  Brian Fox  (bfox@eos.crseo.ucsb.edu)
+
+	* readline.c (rl_copy): Changed name to rl_copy_text.
+
+Mon Mar 22 19:16:05 1993  Brian Fox  (bfox@eos.crseo.ucsb.edu)
+
+	* dispose_cmd.c, several other files. Declare dispose_xxx () as
+	"void".
+
+	* builtins/hashcom.h: Make declarations of hashed_filenames be
+	"extern" to keep the SGI compiler happy.
+
+	* readline.c (rl_initialize_everything): Assign values to
+	out_stream and in_stream immediately, since
+	output_character_function () can be called before
+	readline_internal () is called.
+
+Tue Dec  8 09:30:56 1992  Brian Fox  (bfox@cubit)
+
+	* readline.c (rl_init_terminal) Set PC from BC, not from *buffer.
+
+Mon Nov 30 09:35:47 1992  Brian Fox  (bfox@cubit)
+
+	* readline.c (invoking_keyseqs_in_map, rl_parse_and_bind) Allow
+	backslash to quote characters, such as backslash, double quote,
+	and space. Backslash quotes all character indiscriminately.
+
+	* funmap.c (vi_keymap) Fix type in "vi-replace" declaration.
+
+Fri Nov 20 10:55:05 1992  Brian Fox  (bfox@cubit)
+
+	* readline.c (init_terminal_io, rl_prep_terminal): FINALLY!
+	Declare and use termcap variable `ospeed' when setting up terminal
+	parameters.
+
+Thu Oct  8 08:53:07 1992  Brian J. Fox  (bfox@helios)
+
+	* Makefile, this directory: Include (as links to the canonical
+	sources), tilde.c, tilde.h, posixstat.h and xmalloc.c.
+
+Tue Sep 29 13:07:21 1992  Brian J. Fox  (bfox@helios)
+
+	* readline.c (init_terminal_io) Don't set arrow keys if the key
+	sequences that represent them are already set.
+
+	* readline.c (rl_function_of_keyseq) New function returns the first
+	function (or macro) found while searching a key sequence.
+
+Mon Sep 28 00:34:04 1992  Brian J. Fox  (bfox@helios)
+
+	* readline.c (LibraryVersion) New static char * contains current
+	version number.  Version is at 2.0.
+
+	* readline.c (rl_complete_internal): Incorporated clean changes
+	from gilmore (gnu@cygnus.com) to support quoted substrings within
+	completion functions.
+
+	* readline.c (many locations) Added support for the _GO32_,
+	whatever that is.  Patches supplied by Cygnus, typed in by hand,
+	with cleanups.
+
+Sun Aug 16 12:46:24 1992  Brian Fox  (bfox@cubit)
+
+	* readline.c (init_terminal_io): Find out the values of the keypad
+	arrows and bind them to appropriate RL functions if present.
+
+Mon Aug 10 18:13:24 1992  Brian Fox  (bfox@cubit)
+
+	* history.c (stifle_history): A negative argument to stifle
+	becomes zero.
+
+Tue Jul 28 09:28:41 1992  Brian Fox  (bfox@cubit)
+
+	* readline.c (rl_variable_bind): New local structure describes
+	booleans by name and address; code in rl_variable_bind () looks at
+	structure to set simple variables.
+
+	* parens.c (rl_insert_close): New variable rl_blink_matching_paren
+	is non-zero if we want to blink the matching open when a close is
+	inserted.  If FD_SET is defined, rl_blink_matching_paren defaults
+	to 1, else 0.  If FD_SET is not defined, and
+	rl_blink_matching_paren is non-zero, the close character(s) are/is
+	simply inserted.
+
+Wed Jul 22 20:03:59 1992  Brian Fox  (bfox@cubit)
+
+	* history.c, readline.c, vi_mode.c: Cause the functions strchr ()
+	and strrchr () to be used instead of index () and rindex ()
+	throughout the source.
+
+Mon Jul 13 11:34:07 1992  Brian Fox  (bfox@cubit)
+
+	* readline.c: (rl_variable_bind) New variable "meta-flag" if "on"
+	means force the use of the 8th bit as Meta bit.  Internal variable
+	is called meta_flag.
+
+Thu Jul  9 10:37:56 1992  Brian Fox  (bfox@cubit)
+
+	* history.c (get_history_event) Change INDEX to LOCAL_INDEX.  If
+	compiling for the shell, allow shell metacharacters to separate
+	history tokens as they would for shell tokens.
+
+Sat Jul  4 19:29:12 1992  Brian Fox  (bfox@cubit)
+
+	* vi_keymap.c: According to Posix, TAB self-inserts instead of
+	doing completion.
+
+	* vi_mode.c: (rl_vi_yank_arg) Enter VI insert mode after yanking
+	an arg from the previous line.
+
+	* search.c: New file takes over vi style searching and implements
+	non-incremental searching the history.
+
+	Makefile: Add search.c and search.o.
+
+	funmap.c: Add names for non-incremental-forward-search-history and
+	non-incremental-reverse-search-history.
+
+	readline.h: Add extern definitions for non-incremental searching.
+
+	vi_mode.c: Remove old search code; add calls to code in search.c.
+
+Fri Jul  3 10:36:33 1992  Brian Fox  (bfox@cubit)
+
+	* readline.c (rl_delete_horizontal_space); New function deletes
+	all whitespace surrounding point.
+
+	funmap.c: Add "delete-horizontal-space".
+	emacs_keymap.c: Put rl_delete_horizontal_space () on M-\.
+
+	* readline.c (rl_set_signals, rl_clear_signals); New function
+	rl_set_sighandler () is either defined in a Posix way (if
+	HAVE_POSIX_SIGNALS is defined) or in a BSD way.  Function is
+	called from rl_set_signals () and rl_clear_signals ().
+
+Fri May  8 12:50:15 1992  Brian Fox  (bfox@cubit)
+
+	* readline.c: (readline_default_bindings) Do comparisons with
+	_POSIX_VDISABLE casted to `unsigned char'.  Change tty characters
+	to be unsigned char.
+
+Thu Apr 30 12:36:35 1992  Brian Fox  (bfox@cubit)
+
+	* readline.c: (rl_getc) Handle "read would block" error on
+	non-blocking IO streams.
+
+	* readline.c: (rl_signal_handler): Unblock only the signal that we
+	have caught, not all signals.
+
+Sun Feb 23 03:33:09 1992  Brian Fox  (bfox at gnuwest.fsf.org)
+
+	* readline.c: Many functions.  Use only the macros META_CHAR and
+	UNMETA to deal with meta characters.  Prior to this, we used
+	numeric values and tests.
+
+	* readline.c (rl_complete_internal) Report exactly the number of
+	possible completions, not the number + 1.
+
+	* vi_mode.c (rl_do_move) Do not change the cursor position when
+	using `cw' or `cW'.
+
+	* vi_mode.c (rl_vi_complete) Enter insert mode after completing
+	with `*' or `\'.
+
+Fri Feb 21 05:58:18 1992  Brian Fox  (bfox at gnuwest.fsf.org)
+
+	* readline.c (rl_dispatch) Increment rl_key_sequence_length for
+	meta characters that map onto ESC map.
+
+Mon Feb 10 01:41:35 1992  Brian Fox  (bfox at gnuwest.fsf.org)
+
+	* history.c (history_do_write) Build a buffer of all of the lines
+	to write and write them in one fell swoop (lower overhead than
+	calling write () for each line).  Suggested by Peter Ho.
+
+	* readline.c: Include hbullx20 as well as hpux for determining
+	USGr3ness.
+
+	* readline.c (rl_unix_word_rubout) As per the "Now REMEMBER"
+	comment, pass arguments to rl_kill_text () in the correct order to
+	preserve prepending and appending of killed text.
+
+	* readline.c (rl_search_history) malloc (), realloc (), and free
+	() SEARCH_STRING so that there are no static limits on searching.
+
+	* vi_mode.c (rl_vi_subst) Don't forget to end the undo group.
+
+Fri Jan 31 14:51:02 1992  Brian Fox  (bfox at gnuwest.fsf.org)
+
+	* readline.c (rl_signal_handler): Zero the current history entry's
+	pointer after freeing the undo_list when SIGINT received.
+	Reformat a couple of functions.
+
+Sat Jan 25 13:47:35 1992  Brian Fox  (bfox at bears)
+
+        * readline.c (parser_if): free () TNAME after use.
+
+Tue Jan 21 01:01:35 1992  Brian Fox  (bfox at gnuwest.fsf.org)
+
+	* readline.c (rl_redisplay) and (rl_character_len): Display
+	Control characters as "^c" and Meta characters as "\234", instead
+	of "C-C" and "M-C".
+
+Sun Dec 29 10:59:00 1991  Brian Fox  (bfox at gnuwest.fsf.org)
+
+	* readline.c (init_terminal_io) Default to environment variables
+	LINES and COLUMNS before termcap entry values.  If all else fails,
+	then assume 80x24 terminal.
+
+Sat Dec 28 16:33:11 1991  Brian Fox  (bfox at gnuwest.fsf.org)
+
+	* readline.c: If this machine is USG and it is hpux, then define
+	USGr3.
+
+	* history.c: Cosmetic fixes.
+
+Thu Nov 21 00:10:12 1991  Brian Fox  (bfox at gnuwest.fsf.org)
+
+	* vi_mode.c: (rl_do_move) Place cursor at end of line, never at
+	next to last character.
+
+Thu Nov 14 05:08:01 1991  Brian Fox  (bfox at gnuwest.fsf.org)
+
+	* history.c (get_history_event) Non-anchored searches can have a
+	return index of greater than zero from get_history_event ().
+
+Fri Nov  1 07:02:13 1991  Brian Fox  (bfox at gnuwest.fsf.org)
+
+	* readline.c (rl_translate_keyseq) Make C-? translate to RUBOUT
+	unconditionally.
+
+Mon Oct 28 11:34:52 1991  Brian Fox  (bfox at gnuwest.fsf.org)
+
+	* readline.c; Use Posix directory routines and macros.
+
+	* funmap.c; Add entry for call-last-kbd-macro.
+
+	* readline.c (rl_prep_term); Use system EOF character on POSIX
+	systems also.
+
+Thu Oct  3 16:19:53 1991  Brian Fox  (bfox at gnuwest.fsf.org)
+
+	* readline.c; Make a distinction between having a TERMIOS tty
+	driver, and having POSIX signal handling.  You might one without
+	the other.  New defines used HAVE_POSIX_SIGNALS, and
+	TERMIOS_TTY_DRIVER.
+
+Tue Jul 30 22:37:26 1991  Brian Fox  (bfox at gnuwest.fsf.org)
+
+	* readline.c: rl_getc () If a call to read () returns without an
+	error, but with zero characters, the file is empty, so return EOF.
+
+Thu Jul 11 20:58:38 1991  Brian Fox  (bfox at gnuwest.fsf.org)
+
+	* readline.c: (rl_get_next_history, rl_get_previous_history)
+	Reallocate the buffer space if the line being moved to is longer
+	the the current space allocated.  Amazing that no one has found
+	this bug until now.
+
+Sun Jul  7 02:37:05 1991  Brian Fox  (bfox at gnuwest.fsf.org)
+
+	* readline.c:(rl_parse_and_bind) Allow leading whitespace.
+	  Make sure TERMIO and TERMIOS systems treat CR and NL
+	  disctinctly.
+	
+Tue Jun 25 04:09:27 1991  Brian Fox  (bfox at gnuwest.fsf.org)
+
+	* readline.c: Rework parsing conditionals to pay attention to the
+	prior states of the conditional stack.  This makes $if statements
+	work correctly.
+
+Mon Jun 24 20:45:59 1991  Brian Fox  (bfox at gnuwest.fsf.org)
+
+	* readline.c: support for displaying key binding information
+	includes the functions rl_list_funmap_names (),
+	invoking_keyseqs_in_map (), rl_invoking_keyseqs (),
+	rl_dump_functions (), and rl_function_dumper ().
+
+	funmap.c: support for same includes rl_funmap_names ().
+
+	readline.c, funmap.c: no longer define STATIC_MALLOC.  However,
+	update both version of xrealloc () to handle a null pointer.
+
+Thu Apr 25 12:03:49 1991  Brian Fox  (bfox at gnuwest.fsf.org)
+
+	* vi_mode.c (rl_vi_fword, fWord, etc.  All functions use
+	the macro `isident()'.  Fixed movement bug which prevents
+	continious movement through the text.
+
+Fri Jul 27 16:47:01 1990  Brian Fox  (bfox at gnuwest.fsf.org)
+
+	* readline.c (parser_if) Allow "$if term=foo" construct.
+
+Wed May 23 16:10:33 1990  Brian Fox  (bfox at gnuwest.fsf.org)
+
+	* readline.c (rl_dispatch) Correctly remember the last command
+	executed.  Fixed typo in username_completion_function ().
+
+Mon Apr  9 19:55:48 1990  Brian Fox  (bfox at gnuwest.fsf.org)
+
+	* readline.c: username_completion_function (); For text passed in
+	with a leading `~', remember that this could be a filename (after
+	it is completed).
+
+Thu Apr  5 13:44:24 1990  Brian Fox  (bfox at gnuwest.fsf.org)
+
+	* readline.c: rl_search_history (): Correctly handle case of an
+	unfound search string, but a graceful exit (as with ESC).
+
+	* readline.c: rl_restart_output ();  The Apollo passes the address
+	of the file descriptor to TIOCSTART, not the descriptor itself.
+
+Tue Mar 20 05:38:55 1990  Brian Fox  (bfox at gnuwest.fsf.org)
+
+	* readline.c: rl_complete (); second call in a row causes possible
+	completions to be listed.
+
+	* readline.c: rl_redisplay (), added prompt_this_line variable
+	which is the first character character following \n in prompt.
+
+Sun Mar 11 04:32:03 1990  Brian Fox  (bfox at gnuwest.fsf.org)
+
+	* Signals are now supposedly handled inside of SYSV compilation.
+
+Wed Jan 17 19:24:09 1990  Brian Fox  (bfox at sbphy.ucsb.edu)
+
+	* history.c: history_expand (); fixed overwriting memory error,
+	added needed argument to call to get_history_event ().
+
+Thu Jan 11 10:54:04 1990  Brian Fox  (bfox at sbphy.ucsb.edu)
+
+	* readline.c: added mark_modified_lines to control the
+	display of an asterisk on modified history lines.  Also
+	added a user variable called mark-modified-lines to the
+	`set' command.
+
+Thu Jan  4 10:38:05 1990  Brian Fox  (bfox at sbphy.ucsb.edu)
+
+	* readline.c: start_insert ().  Only use IC if we don't have an im
+	capability.
+
+Fri Sep  8 09:00:45 1989  Brian Fox  (bfox at aurel)
+
+	* readline.c: rl_prep_terminal ().  Only turn on 8th bit
+	  as meta-bit iff the terminal is not using parity.
+
+Sun Sep  3 08:57:40 1989  Brian Fox  (bfox at aurel)
+
+	* readline.c: start_insert ().  Uses multiple
+	  insertion call in cases where that makes sense.
+
+	  rl_insert ().  Read type-ahead buffer for additional
+	  keys that are bound to rl_insert, and insert them
+	  all at once.  Make insertion of single keys given
+	  with an argument much more efficient.
+
+Tue Aug  8 18:13:57 1989  Brian Fox  (bfox at aurel)
+
+	* readline.c: Changed handling of EOF.  readline () returns
+	 (char *)EOF or consed string.  The EOF character is read from the
+	 tty, or if the tty doesn't have one, defaults to C-d.
+
+	* readline.c: Added support for event driven programs.
+	  rl_event_hook is the address of a function you want called
+	  while Readline is waiting for input.
+
+	* readline.c: Cleanup time.  Functions without type declarations
+	  do not use return with a value.
+
+	* history.c: history_expand () has new variable which is the
+	  characters to ignore immediately following history_expansion_char.
+
+Sun Jul 16 08:14:00 1989  Brian Fox  (bfox at aurel)
+
+	* rl_prep_terminal ()
+	  BSD version turns off C-s, C-q, C-y, C-v.
+
+	* readline.c -- rl_prep_terminal ()
+	  SYSV version hacks readline_echoing_p.
+	  BSD version turns on passing of the 8th bit for the duration
+	  of reading the line.
+
+Tue Jul 11 06:25:01 1989  Brian Fox  (bfox at aurel)
+
+	* readline.c: new variable rl_tilde_expander.
+	  If non-null, this contains the address of a function to call if
+	  the standard meaning for expanding a tilde fails.  The function is
+	  called with the text sans tilde (as in "foo"), and returns a
+	  malloc()'ed string which is the expansion, or a NULL pointer if
+	  there is no expansion. 
+
+	* readline.h - new file chardefs.h
+	  Separates things that only readline.c needs from the standard
+	  header file publishing interesting things about readline.
+
+	* readline.c:
+	  readline_default_bindings () now looks at terminal chararacters
+	  and binds those as well.
+
+Wed Jun 28 20:20:51 1989  Brian Fox  (bfox at aurel)
+
+	* Made readline and history into independent libraries.
+
diff --git a/lib/readline/Makefile.in b/lib/readline/Makefile.in
new file mode 100644
index 0000000..b2358c6
--- /dev/null
+++ b/lib/readline/Makefile.in
@@ -0,0 +1,396 @@
+## -*- text -*- #############################################################
+#								            #
+# Makefile for the Bash versions of the GNU Readline and History Libraries. #
+#								            #
+#############################################################################
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+PACKAGE = @PACKAGE_NAME@
+VERSION = @PACKAGE_VERSION@
+
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+
+srcdir = @srcdir@
+VPATH = @srcdir@
+topdir = @top_srcdir@
+BUILD_DIR = @BUILD_DIR@
+
+datarootdir = @datarootdir@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+
+CC = @CC@
+RANLIB = @RANLIB@
+AR = @AR@
+ARFLAGS = @ARFLAGS@
+RM = rm -f
+CP = cp
+MV = mv
+
+SHELL = @MAKE_SHELL@
+
+# Programs to make tags files.
+ETAGS = etags -tw
+CTAGS = ctags -tw
+
+DEBUG = @DEBUG@
+
+CFLAGS = @CFLAGS@
+LOCAL_CFLAGS = @LOCAL_CFLAGS@ ${DEBUG}
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+
+DEFS = @DEFS@
+LOCAL_DEFS = @LOCAL_DEFS@
+
+INCLUDES = -I. -I$(BUILD_DIR) -I$(topdir) -I$(topdir)/lib
+
+CCFLAGS = $(DEFS) $(LOCAL_DEFS) $(APP_CFLAGS) $(CPPFLAGS) ${INCLUDES} \
+	  $(LOCAL_CFLAGS) $(CFLAGS) ${ADDON_CFLAGS}
+
+.c.o:
+	${RM} $@
+	$(CC) -c $(CCFLAGS) $<
+
+# The name of the main library target.
+LIBRARY_NAME = libreadline.a
+
+# The C code source files for this library.
+CSOURCES = $(srcdir)/readline.c $(srcdir)/funmap.c $(srcdir)/keymaps.c \
+	   $(srcdir)/vi_mode.c $(srcdir)/parens.c $(srcdir)/rltty.c \
+	   $(srcdir)/complete.c $(srcdir)/bind.c $(srcdir)/isearch.c \
+	   $(srcdir)/display.c $(srcdir)/signals.c $(srcdir)/emacs_keymap.c \
+	   $(srcdir)/vi_keymap.c $(srcdir)/util.c $(srcdir)/kill.c \
+	   $(srcdir)/undo.c $(srcdir)/macro.c $(srcdir)/input.c \
+	   $(srcdir)/callback.c $(srcdir)/terminal.c $(srcdir)/xmalloc.c \
+	   $(srcdir)/history.c $(srcdir)/histsearch.c $(srcdir)/histexpand.c \
+	   $(srcdir)/histfile.c $(srcdir)/nls.c $(srcdir)/search.c \
+	   $(srcdir)/shell.c $(srcdir)/tilde.c $(srcdir)/savestring.c \
+	   $(srcdir)/text.c $(srcdir)/misc.c $(srcdir)/compat.c \
+	   $(srcdir)/colors.c $(srcdir)/parse-colors.c \
+	   $(srcdir)/mbutil.c $(srcdir)/xfree.c
+
+# The header files for this library.
+HSOURCES = readline.h rldefs.h chardefs.h keymaps.h history.h histlib.h \
+	   posixstat.h posixdir.h posixjmp.h tilde.h rlconf.h rltty.h \
+	   ansi_stdlib.h rlstdc.h tcap.h xmalloc.h rlprivate.h rlshell.h \
+	   rltypedefs.h rlmbutil.h colors.h parse-colors.h
+
+HISTOBJ = history.o histexpand.o histfile.o histsearch.o shell.o savestring.o \
+	  mbutil.o
+TILDEOBJ = tilde.o
+COLORSOBJ = colors.o parse-colors.o
+OBJECTS = readline.o vi_mode.o funmap.o keymaps.o parens.o search.o \
+	  rltty.o complete.o bind.o isearch.o display.o signals.o \
+	  util.o kill.o undo.o macro.o input.o callback.o terminal.o \
+	  text.o nls.o misc.o $(HISTOBJ) $(TILDEOBJ) $(COLORSOBJ) \
+	  xmalloc.o xfree.o compat.o 
+
+# The texinfo files which document this library.
+DOCSOURCE = doc/rlman.texinfo doc/rltech.texinfo doc/rluser.texinfo
+DOCOBJECT = doc/readline.dvi
+DOCSUPPORT = doc/Makefile
+DOCUMENTATION = $(DOCSOURCE) $(DOCOBJECT) $(DOCSUPPORT)
+
+SUPPORT = Makefile ChangeLog $(DOCSUPPORT) examples/[-a-z.]*
+
+SOURCES  = $(CSOURCES) $(HSOURCES) $(DOCSOURCE)
+
+THINGS_TO_TAR = $(SOURCES) $(SUPPORT)
+
+INSTALLED_HEADERS = readline.h chardefs.h keymaps.h history.h tilde.h \
+		    rlstdc.h rlconf.h rltypedefs.h
+
+##########################################################################
+
+all: libreadline.a libhistory.a
+
+libreadline.a: $(OBJECTS)
+	$(RM) $@
+	$(AR) $(ARFLAGS) $@ $(OBJECTS)
+	-test -n "$(RANLIB)" && $(RANLIB) $@
+
+libhistory.a: $(HISTOBJ) xmalloc.o xfree.o
+	$(RM) $@
+	$(AR) $(ARFLAGS) $@ $(HISTOBJ) xmalloc.o xfree.o
+	-test -n "$(RANLIB)" && $(RANLIB) $@
+
+documentation: force
+	test -d doc || mkdir doc
+	-( cd doc && $(MAKE) $(MFLAGS) )
+
+# Since tilde.c is shared between readline and bash, make sure we compile
+# it with the right flags when it's built as part of readline
+tilde.o:	tilde.c
+	rm -f $@
+	$(CC) $(CCFLAGS) -DREADLINE_LIBRARY -c $(srcdir)/tilde.c
+
+force:
+
+install:
+	@echo "This version of the readline library should not be installed."
+
+uninstall:
+	@echo "This version of the readline library should not be installed."
+
+TAGS:	force
+	$(ETAGS) $(CSOURCES) $(HSOURCES)
+
+tags:	force
+	$(CTAGS) $(CSOURCES) $(HSOURCES)
+
+clean:	force
+	$(RM) $(OBJECTS) *.a
+	-( cd doc && $(MAKE) $(MFLAGS) $@ )
+
+mostlyclean: clean
+	-( cd doc && $(MAKE) $(MFLAGS) $@ )
+
+distclean maintainer-clean: clean
+	-( cd doc && $(MAKE) $(MFLAGS) $@ )
+	$(RM) Makefile
+	$(RM) TAGS tags
+
+# Dependencies
+bind.o: ansi_stdlib.h posixstat.h
+bind.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h
+bind.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h
+bind.o: history.h rlstdc.h
+callback.o: rlconf.h ansi_stdlib.h
+callback.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h
+callback.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h rlstdc.h
+compat.o: ${BUILD_DIR}/config.h
+compat.o: rlstdc.h rltypedefs.h
+complete.o: ansi_stdlib.h posixdir.h posixstat.h
+complete.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h
+complete.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h rlstdc.h
+complete.o: colors.h
+display.o: ansi_stdlib.h posixstat.h
+display.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h
+display.o: tcap.h
+display.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h
+display.o: history.h rlstdc.h
+funmap.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h
+funmap.o: rlconf.h ansi_stdlib.h rlstdc.h
+funmap.o: ${BUILD_DIR}/config.h
+histexpand.o: ansi_stdlib.h
+histexpand.o: history.h histlib.h rlstdc.h
+histexpand.o: ${BUILD_DIR}/config.h
+histfile.o: ansi_stdlib.h
+histfile.o: history.h histlib.h rlstdc.h
+histfile.o: ${BUILD_DIR}/config.h
+history.o: ansi_stdlib.h
+history.o: history.h histlib.h rlstdc.h
+history.o: ${BUILD_DIR}/config.h
+histsearch.o: ansi_stdlib.h
+histsearch.o: history.h histlib.h rlstdc.h
+histsearch.o: ${BUILD_DIR}/config.h
+input.o: ansi_stdlib.h
+input.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h
+input.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h rlstdc.h
+isearch.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h
+isearch.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h
+isearch.o: ansi_stdlib.h history.h rlstdc.h
+keymaps.o: emacs_keymap.c vi_keymap.c
+keymaps.o: keymaps.h rltypedefs.h chardefs.h rlconf.h ansi_stdlib.h
+keymaps.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h
+keymaps.o: ${BUILD_DIR}/config.h rlstdc.h
+kill.o: ansi_stdlib.h
+kill.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h
+kill.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h
+kill.o: history.h rlstdc.h
+macro.o: ansi_stdlib.h
+macro.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h
+macro.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h
+macro.o: history.h rlstdc.h
+mbutil.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h rlmbutil.h
+mbutil.o: readline.h keymaps.h rltypedefs.h chardefs.h rlstdc.h
+misc.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h
+misc.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h
+misc.o: history.h rlstdc.h ansi_stdlib.h
+nls.o: ansi_stdlib.h
+nls.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h
+nls.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h
+nls.o: history.h rlstdc.h
+parens.o: rlconf.h
+parens.o: ${BUILD_DIR}/config.h
+parens.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h rlstdc.h
+readline.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h
+readline.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h
+readline.o: history.h rlstdc.h
+readline.o: posixstat.h ansi_stdlib.h posixjmp.h
+rltty.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h
+rltty.o: rltty.h
+rltty.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h rlstdc.h
+savestring.o: ${BUILD_DIR}/config.h
+search.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h
+search.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h
+search.o: ansi_stdlib.h history.h rlstdc.h
+shell.o: ${BUILD_DIR}/config.h ansi_stdlib.h
+signals.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h
+signals.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h
+signals.o: history.h rlstdc.h
+terminal.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h
+terminal.o: tcap.h
+terminal.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h
+terminal.o: history.h rlstdc.h
+text.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h
+text.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h
+text.o: history.h rlstdc.h ansi_stdlib.h
+rltty.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h
+tilde.o: ansi_stdlib.h
+tilde.o: ${BUILD_DIR}/config.h
+tilde.o: tilde.h
+undo.o: ansi_stdlib.h
+undo.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h
+undo.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h
+undo.o: history.h rlstdc.h xmalloc.h
+util.o: posixjmp.h ansi_stdlib.h
+util.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h
+util.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h rlstdc.h
+vi_mode.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h
+vi_mode.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h
+vi_mode.o: history.h ansi_stdlib.h rlstdc.h
+xmalloc.o: ${BUILD_DIR}/config.h ansi_stdlib.h
+xfree.o: ${BUILD_DIR}/config.h ansi_stdlib.h
+
+colors.o: ${BUILD_DIR}/config.h colors.h
+colors.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h rlstdc.h
+colors.o: rlconf.h
+colors.o: ansi_stdlib.h posixstat.h
+parse-colors.o: ${BUILD_DIR}/config.h colors.h parse-colors.h
+parse-colors.o: rldefs.h rlconf.h
+parse-colors.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h rlstdc.h
+
+bind.o: rlshell.h
+histfile.o: rlshell.h
+nls.o: rlshell.h
+readline.o: rlshell.h
+shell.o: rlshell.h
+terminal.o: rlshell.h
+histexpand.o: rlshell.h
+
+bind.o: rlprivate.h
+callback.o: rlprivate.h
+complete.o: rlprivate.h
+display.o: rlprivate.h
+input.o: rlprivate.h
+isearch.o: rlprivate.h
+kill.o: rlprivate.h
+macro.o: rlprivate.h
+mbutil.o: rlprivate.h
+misc.o: rlprivate.h
+nls.o: rlprivate.h
+parens.o: rlprivate.h
+readline.o: rlprivate.h
+rltty.o: rlprivate.h
+search.o: rlprivate.h
+signals.o: rlprivate.h
+terminal.o: rlprivate.h
+text.o: rlprivate.h
+undo.o: rlprivate.h
+util.o: rlprivate.h
+vi_mode.o: rlprivate.h
+colors.o: rlprivate.h
+parse-colors.o: rlprivate.h
+
+bind.o: xmalloc.h
+complete.o: xmalloc.h  
+display.o: xmalloc.h
+funmap.o: xmalloc.h
+histexpand.o: xmalloc.h   
+histfile.o: xmalloc.h
+history.o: xmalloc.h
+input.o: xmalloc.h
+isearch.o: xmalloc.h
+keymaps.o: xmalloc.h
+kill.o: xmalloc.h
+macro.o: xmalloc.h
+mbutil.o: xmalloc.h
+misc.o: xmalloc.h  
+readline.o: xmalloc.h   
+savestring.o: xmalloc.h
+search.o: xmalloc.h
+shell.o: xmalloc.h   
+terminal.o: xmalloc.h  
+text.o: xmalloc.h
+tilde.o: xmalloc.h 
+undo.o: xmalloc.h
+util.o: xmalloc.h
+vi_mode.o: xmalloc.h 
+xfree.o: xmalloc.h
+xmalloc.o: xmalloc.h
+colors.o: xmalloc.h
+parse-colors.o: xmalloc.h
+
+complete.o: rlmbutil.h
+display.o: rlmbutil.h
+histexpand.o: rlmbutil.h
+input.o: rlmbutil.h
+isearch.o: rlmbutil.h
+mbutil.o: rlmbutil.h
+misc.o: rlmbutil.h
+readline.o: rlmbutil.h
+search.o: rlmbutil.h
+text.o: rlmbutil.h
+vi_mode.o: rlmbutil.h
+colors.o: rlmbutil.h
+parse-colors.o: rlmbutil.h
+
+# Rules for deficient makes, like SunOS and Solaris
+bind.o: bind.c
+callback.o: callback.c
+compat.o: compat.c
+complete.o: complete.c
+display.o: display.c
+funmap.o: funmap.c
+input.o: input.c
+isearch.o: isearch.c
+keymaps.o: keymaps.c emacs_keymap.c vi_keymap.c
+kill.o: kill.c
+macro.o: macro.c
+mbutil.o: mbutil.c
+misc.o: misc.c
+nls.o: nls.c
+parens.o: parens.c
+readline.o: readline.c
+rltty.o: rltty.c
+savestring.o: savestring.c
+search.o: search.c
+shell.o: shell.c
+signals.o: signals.c
+terminal.o: terminal.c
+text.o: text.c
+tilde.o: tilde.c
+undo.o: undo.c
+util.o: util.c
+vi_mode.o: vi_mode.c
+xfree.o: xfree.c
+xmalloc.o: xmalloc.c
+
+colors.o: colors.c
+parse-colors.o: parse-colors.c
+
+histexpand.o: histexpand.c
+histfile.o: histfile.c
+history.o: history.c
+histsearch.o: histsearch.c
diff --git a/lib/readline/README b/lib/readline/README
new file mode 100644
index 0000000..131471c
--- /dev/null
+++ b/lib/readline/README
@@ -0,0 +1,6 @@
+This is the distribution of the Gnu Readline library.  See the file
+STANDALONE for a description of the #defines that can be passed via
+the makefile to build readline on different systems.
+
+The file rlconf.h contains defines that enable and disable certain
+readline features.
diff --git a/lib/readline/STANDALONE b/lib/readline/STANDALONE
new file mode 100644
index 0000000..c6b5cbd
--- /dev/null
+++ b/lib/readline/STANDALONE
@@ -0,0 +1,2 @@
+This is not to be built as a standalone library to be installed in some
+public place; get the full readline distribution instead.
diff --git a/lib/readline/ansi_stdlib.h b/lib/readline/ansi_stdlib.h
new file mode 100644
index 0000000..7dc2ee0
--- /dev/null
+++ b/lib/readline/ansi_stdlib.h
@@ -0,0 +1,54 @@
+/* ansi_stdlib.h -- An ANSI Standard stdlib.h. */
+/* A minimal stdlib.h containing extern declarations for those functions
+   that bash uses. */
+
+/* Copyright (C) 1993 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_STDLIB_H_)
+#define	_STDLIB_H_ 1
+
+/* String conversion functions. */
+extern int atoi ();
+
+extern double atof ();
+extern double strtod ();
+
+/* Memory allocation functions. */
+/* Generic pointer type. */
+#ifndef PTR_T
+
+#if defined (__STDC__)
+#  define PTR_T	void *
+#else
+#  define PTR_T char *
+#endif
+
+#endif /* PTR_T */
+
+extern PTR_T malloc ();
+extern PTR_T realloc ();
+extern void free ();
+
+/* Other miscellaneous functions. */
+extern void abort ();
+extern void exit ();
+extern char *getenv ();
+extern void qsort ();
+
+#endif /* _STDLIB_H  */
diff --git a/lib/readline/bind.c b/lib/readline/bind.c
new file mode 100644
index 0000000..87596dc
--- /dev/null
+++ b/lib/readline/bind.c
@@ -0,0 +1,2970 @@
+/* bind.c -- key binding and startup file support for the readline library. */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#if defined (__TANDEM)
+#  include <floss.h>
+#endif
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <stdio.h>
+#include <sys/types.h>
+#include <fcntl.h>
+#if defined (HAVE_SYS_FILE_H)
+#  include <sys/file.h>
+#endif /* HAVE_SYS_FILE_H */
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif /* HAVE_UNISTD_H */
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#include <errno.h>
+
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+#include "posixstat.h"
+
+/* System-specific feature definitions and include files. */
+#include "rldefs.h"
+
+/* Some standard library routines. */
+#include "readline.h"
+#include "history.h"
+
+#include "rlprivate.h"
+#include "rlshell.h"
+#include "xmalloc.h"
+
+#if !defined (strchr) && !defined (__STDC__)
+extern char *strchr (), *strrchr ();
+#endif /* !strchr && !__STDC__ */
+
+/* Variables exported by this file. */
+Keymap rl_binding_keymap;
+
+static int _rl_skip_to_delim PARAMS((char *, int, int));
+
+#if defined (USE_VARARGS) && defined (PREFER_STDARG)
+static void _rl_init_file_error (const char *, ...)  __attribute__((__format__ (printf, 1, 2)));
+#else
+static void _rl_init_file_error ();
+#endif
+
+static rl_command_func_t *_rl_function_of_keyseq_internal PARAMS((const char *, size_t, Keymap, int *));
+
+static char *_rl_read_file PARAMS((char *, size_t *));
+static int _rl_read_init_file PARAMS((const char *, int));
+static int glean_key_from_name PARAMS((char *));
+
+static int find_boolean_var PARAMS((const char *));
+static int find_string_var PARAMS((const char *));
+
+static const char *boolean_varname PARAMS((int));
+static const char *string_varname PARAMS((int));
+
+static char *_rl_get_string_variable_value PARAMS((const char *));
+static int substring_member_of_array PARAMS((const char *, const char * const *));
+
+static int _rl_get_keymap_by_name PARAMS((const char *));
+static int _rl_get_keymap_by_map PARAMS((Keymap));
+
+static int currently_reading_init_file;
+
+/* used only in this file */
+static int _rl_prefer_visible_bell = 1;
+
+#define OP_EQ	1
+#define OP_NE	2
+#define OP_GT	3
+#define OP_GE	4
+#define OP_LT	5
+#define OP_LE	6
+
+#define OPSTART(c)	((c) == '=' || (c) == '!' || (c) == '<' || (c) == '>')
+#define CMPSTART(c)	((c) == '=' || (c) == '!')
+
+/* **************************************************************** */
+/*								    */
+/*			Binding keys				    */
+/*								    */
+/* **************************************************************** */
+
+/* rl_add_defun (char *name, rl_command_func_t *function, int key)
+   Add NAME to the list of named functions.  Make FUNCTION be the function
+   that gets called.  If KEY is not -1, then bind it. */
+int
+rl_add_defun (const char *name, rl_command_func_t *function, int key)
+{
+  if (key != -1)
+    rl_bind_key (key, function);
+  rl_add_funmap_entry (name, function);
+  return 0;
+}
+
+/* Bind KEY to FUNCTION.  Returns non-zero if KEY is out of range. */
+int
+rl_bind_key (int key, rl_command_func_t *function)
+{
+  char keyseq[4];
+  int l;
+
+  if (key < 0 || key > largest_char)
+    return (key);
+
+  /* Want to make this a multi-character key sequence with an ESC prefix */
+  if (META_CHAR (key) && _rl_convert_meta_chars_to_ascii)
+    {
+      if (_rl_keymap[ESC].type == ISKMAP)
+	{
+	  Keymap escmap;
+
+	  escmap = FUNCTION_TO_KEYMAP (_rl_keymap, ESC);
+	  key = UNMETA (key);
+	  escmap[key].type = ISFUNC;
+	  escmap[key].function = function;
+	  return (0);
+	}
+
+      /* Otherwise, let's just let rl_generic_bind handle the key sequence.
+	 We start it off with ESC here and let the code below add the rest
+	 of the sequence. */
+      keyseq[0] = ESC;
+      l = 1;
+      key = UNMETA(key);
+      goto bind_keyseq;
+    }
+
+  /* If it's bound to a function or macro, just overwrite.  Otherwise we have
+     to treat it as a key sequence so rl_generic_bind handles shadow keymaps
+     for us.  If we are binding '\' or \C-@ (NUL) make sure to escape it so
+     it makes it through the call to rl_translate_keyseq. */
+  if (_rl_keymap[key].type != ISKMAP)
+    {
+      if (_rl_keymap[key].type == ISMACR)
+	xfree ((char *)_rl_keymap[key].function);
+      _rl_keymap[key].type = ISFUNC;
+      _rl_keymap[key].function = function;
+    }
+  else
+    {
+      l = 0;
+bind_keyseq:
+      if (key == '\\')
+	{
+	  keyseq[l++] = '\\';
+	  keyseq[l++] = '\\';
+	}
+      else if (key == '\0')	  
+	{
+	  keyseq[l++] = '\\';
+	  keyseq[l++] = '0';
+	}
+      else
+	keyseq[l++] = key;
+      keyseq[l] = '\0';
+      rl_bind_keyseq (keyseq, function);
+    }
+  rl_binding_keymap = _rl_keymap;
+  return (0);
+}
+
+/* Bind KEY to FUNCTION in MAP.  Returns non-zero in case of invalid
+   KEY. */
+int
+rl_bind_key_in_map (int key, rl_command_func_t *function, Keymap map)
+{
+  int result;
+  Keymap oldmap;
+
+  oldmap = _rl_keymap;
+  _rl_keymap = map;
+  result = rl_bind_key (key, function);
+  _rl_keymap = oldmap;
+  return (result);
+}
+
+/* Bind key sequence KEYSEQ to DEFAULT_FUNC if KEYSEQ is unbound.  Right
+   now, this is always used to attempt to bind the arrow keys. */
+int
+rl_bind_key_if_unbound_in_map (int key, rl_command_func_t *default_func, Keymap kmap)
+{
+  char *keyseq;
+
+  keyseq = rl_untranslate_keyseq ((unsigned char)key);
+  return (rl_bind_keyseq_if_unbound_in_map (keyseq, default_func, kmap));
+}
+
+int
+rl_bind_key_if_unbound (int key, rl_command_func_t *default_func)
+{
+  char *keyseq;
+
+  keyseq = rl_untranslate_keyseq ((unsigned char)key);
+  return (rl_bind_keyseq_if_unbound_in_map (keyseq, default_func, _rl_keymap));
+}
+
+/* Make KEY do nothing in the currently selected keymap.
+   Returns non-zero in case of error.  This is not the same as self-insert;
+   this makes it a dead key. */
+int
+rl_unbind_key (int key)
+{
+  return (rl_bind_key (key, (rl_command_func_t *)NULL));
+}
+
+/* Make KEY do nothing in MAP. Returns non-zero in case of error. */
+int
+rl_unbind_key_in_map (int key, Keymap map)
+{
+  return (rl_bind_key_in_map (key, (rl_command_func_t *)NULL, map));
+}
+
+/* Unbind all keys bound to FUNCTION in MAP. */
+int
+rl_unbind_function_in_map (rl_command_func_t *func, Keymap map)
+{
+  register int i, rval;
+
+  for (i = rval = 0; i < KEYMAP_SIZE; i++)
+    {
+      if (map[i].type == ISFUNC && map[i].function == func)
+	{
+	  map[i].function = (rl_command_func_t *)NULL;
+	  rval = 1;
+	}
+      else if (map[i].type == ISKMAP)		/* TAG:readline-8.1 */
+	{
+	  int r;
+	  r = rl_unbind_function_in_map (func, FUNCTION_TO_KEYMAP (map, i));
+	  if (r == 1)
+	    rval = 1;
+	}
+    }
+  return rval;
+}
+
+/* Unbind all keys bound to COMMAND, which is a bindable command name, in MAP */
+int
+rl_unbind_command_in_map (const char *command, Keymap map)
+{
+  rl_command_func_t *func;
+
+  func = rl_named_function (command);
+  if (func == 0)
+    return 0;
+  return (rl_unbind_function_in_map (func, map));
+}
+
+/* Bind the key sequence represented by the string KEYSEQ to
+   FUNCTION, starting in the current keymap.  This makes new
+   keymaps as necessary. */
+int
+rl_bind_keyseq (const char *keyseq, rl_command_func_t *function)
+{
+  return (rl_generic_bind (ISFUNC, keyseq, (char *)function, _rl_keymap));
+}
+
+/* Bind the key sequence represented by the string KEYSEQ to
+   FUNCTION.  This makes new keymaps as necessary.  The initial
+   place to do bindings is in MAP. */
+int
+rl_bind_keyseq_in_map (const char *keyseq, rl_command_func_t *function, Keymap map)
+{
+  return (rl_generic_bind (ISFUNC, keyseq, (char *)function, map));
+}
+
+/* Backwards compatibility; equivalent to rl_bind_keyseq_in_map() */
+int
+rl_set_key (const char *keyseq, rl_command_func_t *function, Keymap map)
+{
+  return (rl_generic_bind (ISFUNC, keyseq, (char *)function, map));
+}
+
+/* Bind key sequence KEYSEQ to DEFAULT_FUNC if KEYSEQ is unbound.  Right
+   now, this is always used to attempt to bind the arrow keys, hence the
+   check for rl_vi_movement_mode. */
+int
+rl_bind_keyseq_if_unbound_in_map (const char *keyseq, rl_command_func_t *default_func, Keymap kmap)
+{
+  rl_command_func_t *func;
+  char *keys;
+  int keys_len;
+
+  if (keyseq)
+    {
+      /* Handle key sequences that require translations and `raw' ones that
+	 don't. This might be a problem with backslashes. */
+      keys = (char *)xmalloc (1 + (2 * strlen (keyseq)));
+      if (rl_translate_keyseq (keyseq, keys, &keys_len))
+	{
+	  xfree (keys);
+	  return -1;
+	}
+      func = rl_function_of_keyseq_len (keys, keys_len, kmap, (int *)NULL);
+      xfree (keys);
+#if defined (VI_MODE)
+      if (!func || func == rl_do_lowercase_version || func == rl_vi_movement_mode)
+#else
+      if (!func || func == rl_do_lowercase_version)
+#endif
+	return (rl_bind_keyseq_in_map (keyseq, default_func, kmap));
+      else
+	return 1;
+    }
+  return 0;
+}
+
+int
+rl_bind_keyseq_if_unbound (const char *keyseq, rl_command_func_t *default_func)
+{
+  return (rl_bind_keyseq_if_unbound_in_map (keyseq, default_func, _rl_keymap));
+}
+
+/* Bind the key sequence represented by the string KEYSEQ to
+   the string of characters MACRO.  This makes new keymaps as
+   necessary.  The initial place to do bindings is in MAP. */
+int
+rl_macro_bind (const char *keyseq, const char *macro, Keymap map)
+{
+  char *macro_keys;
+  int macro_keys_len;
+
+  macro_keys = (char *)xmalloc ((2 * strlen (macro)) + 1);
+
+  if (rl_translate_keyseq (macro, macro_keys, &macro_keys_len))
+    {
+      xfree (macro_keys);
+      return -1;
+    }
+  rl_generic_bind (ISMACR, keyseq, macro_keys, map);
+  return 0;
+}
+
+/* Bind the key sequence represented by the string KEYSEQ to
+   the arbitrary pointer DATA.  TYPE says what kind of data is
+   pointed to by DATA, right now this can be a function (ISFUNC),
+   a macro (ISMACR), or a keymap (ISKMAP).  This makes new keymaps
+   as necessary.  The initial place to do bindings is in MAP. */
+int
+rl_generic_bind (int type, const char *keyseq, char *data, Keymap map)
+{
+  char *keys;
+  int keys_len, prevkey, ic;
+  register int i;
+  KEYMAP_ENTRY k;
+  Keymap prevmap;  
+
+  k.function = 0;
+
+  /* If no keys to bind to, exit right away. */
+  if (keyseq == 0 || *keyseq == 0)
+    {
+      if (type == ISMACR)
+	xfree (data);
+      return -1;
+    }
+
+  keys = (char *)xmalloc (1 + (2 * strlen (keyseq)));
+
+  /* Translate the ASCII representation of KEYSEQ into an array of
+     characters.  Stuff the characters into KEYS, and the length of
+     KEYS into KEYS_LEN. */
+  if (rl_translate_keyseq (keyseq, keys, &keys_len))
+    {
+      xfree (keys);
+      return -1;
+    }
+
+  prevmap = map;
+  prevkey = keys[0];
+
+  /* Bind keys, making new keymaps as necessary. */
+  for (i = 0; i < keys_len; i++)
+    {
+      unsigned char uc = keys[i];
+
+      if (i > 0)
+	prevkey = ic;
+
+      ic = uc;
+      if (ic < 0 || ic >= KEYMAP_SIZE)
+        {
+          xfree (keys);
+	  return -1;
+        }
+
+      /* We now rely on rl_translate_keyseq to do this conversion, so this
+	 check is superfluous. */
+#if 0
+      if (META_CHAR (ic) && _rl_convert_meta_chars_to_ascii)
+	{
+	  ic = UNMETA (ic);
+	  if (map[ESC].type == ISKMAP)
+	    {
+	      prevmap = map;
+	      map = FUNCTION_TO_KEYMAP (map, ESC);
+	    }
+	}
+#endif
+
+      if ((i + 1) < keys_len)
+	{
+	  if (map[ic].type != ISKMAP)
+	    {
+	      /* We allow subsequences of keys.  If a keymap is being
+		 created that will `shadow' an existing function or macro
+		 key binding, we save that keybinding into the ANYOTHERKEY
+		 index in the new map.  The dispatch code will look there
+		 to find the function to execute if the subsequence is not
+		 matched.  ANYOTHERKEY was chosen to be greater than
+		 UCHAR_MAX. */
+	      k = map[ic];
+
+	      map[ic].type = ISKMAP;
+	      map[ic].function = KEYMAP_TO_FUNCTION (rl_make_bare_keymap());
+	    }
+	  prevmap = map;
+	  map = FUNCTION_TO_KEYMAP (map, ic);
+	  /* The dispatch code will return this function if no matching
+	     key sequence is found in the keymap.  This (with a little
+	     help from the dispatch code in readline.c) allows `a' to be
+	     mapped to something, `abc' to be mapped to something else,
+	     and the function bound  to `a' to be executed when the user
+	     types `abx', leaving `bx' in the input queue. */
+	  if (k.function && ((k.type == ISFUNC && k.function != rl_do_lowercase_version) || k.type == ISMACR))
+	    {
+	      map[ANYOTHERKEY] = k;
+	      k.function = 0;
+	    }
+	}
+      else
+	{
+	  if (map[ic].type == ISKMAP)
+	    {
+	      prevmap = map;
+	      map = FUNCTION_TO_KEYMAP (map, ic);
+	      ic = ANYOTHERKEY;
+	      /* If we're trying to override a keymap with a null function
+		 (e.g., trying to unbind it), we can't use a null pointer
+		 here because that's indistinguishable from having not been
+		 overridden.  We use a special bindable function that does
+		 nothing. */
+	      if (type == ISFUNC && data == 0)
+		data = (char *)_rl_null_function;
+	    }
+	  if (map[ic].type == ISMACR)
+	    xfree ((char *)map[ic].function);
+
+	  map[ic].function = KEYMAP_TO_FUNCTION (data);
+	  map[ic].type = type;
+	}
+
+      rl_binding_keymap = map;
+
+    }
+
+  /* If we unbound a key (type == ISFUNC, data == 0), and the prev keymap
+     points to the keymap where we unbound the key (sanity check), and the
+     current binding keymap is empty (rl_empty_keymap() returns non-zero),
+     and the binding keymap has ANYOTHERKEY set with type == ISFUNC
+     (overridden function), delete the now-empty keymap, take the previously-
+     overridden function and remove the override. */
+  /* Right now, this only works one level back. */
+  if (type == ISFUNC && data == 0 &&
+      prevmap[prevkey].type == ISKMAP &&
+      (FUNCTION_TO_KEYMAP(prevmap, prevkey) == rl_binding_keymap) &&
+      rl_binding_keymap[ANYOTHERKEY].type == ISFUNC &&
+      rl_empty_keymap (rl_binding_keymap))
+    {
+      prevmap[prevkey].type = rl_binding_keymap[ANYOTHERKEY].type;
+      prevmap[prevkey].function = rl_binding_keymap[ANYOTHERKEY].function;
+      rl_discard_keymap (rl_binding_keymap);
+      rl_binding_keymap = prevmap;
+    }
+
+  xfree (keys);
+  return 0;
+}
+
+/* Translate the ASCII representation of SEQ, stuffing the values into ARRAY,
+   an array of characters.  LEN gets the final length of ARRAY.  Return
+   non-zero if there was an error parsing SEQ. */
+int
+rl_translate_keyseq (const char *seq, char *array, int *len)
+{
+  register int i, l, temp;
+  int has_control, has_meta;
+  unsigned char c;
+
+  has_control = 0;
+  has_meta = 0;
+
+  /* When there are incomplete prefixes \C- or \M- (has_control || has_meta)
+     without base character at the end of SEQ, they are processed as the
+     prefixes for '\0'.
+  */
+  for (i = l = 0; (c = seq[i]) || has_control || has_meta; i++)
+    {
+      /* Only backslashes followed by a non-null character are handled
+	 specially.  Trailing backslash (backslash followed by '\0') is
+	 processed as a normal character.
+      */
+      if (c == '\\' && seq[i + 1] != '\0')
+	{
+	  c = seq[++i];
+
+	  /* Handle \C- and \M- prefixes. */
+	  if (c == 'C' && seq[i + 1] == '-')
+	    {
+	      i++;
+	      has_control = 1;
+	      continue;
+	    }
+	  else if (c == 'M' && seq[i + 1] == '-')
+	    {
+	      i++;
+	      has_meta = 1;
+	      continue;
+	    }	      
+
+	  /* Translate other backslash-escaped characters.  These are the
+	     same escape sequences that bash's `echo' and `printf' builtins
+	     handle, with the addition of \d -> RUBOUT.  A backslash
+	     preceding a character that is not special is stripped. */
+	  switch (c)
+	    {
+	    case 'a':
+	      c = '\007';
+	      break;
+	    case 'b':
+	      c = '\b';
+	      break;
+	    case 'd':
+	      c = RUBOUT;	/* readline-specific */
+	      break;
+	    case 'e':
+	      c = ESC;
+	      break;
+	    case 'f':
+	      c = '\f';
+	      break;
+	    case 'n':
+	      c = NEWLINE;
+	      break;
+	    case 'r':
+	      c = RETURN;
+	      break;
+	    case 't':
+	      c = TAB;
+	      break;
+	    case 'v':
+	      c = 0x0B;
+	      break;
+	    case '\\':
+	      c = '\\';
+	      break;
+	    case '0': case '1': case '2': case '3':
+	    case '4': case '5': case '6': case '7':
+	      i++;
+	      for (temp = 2, c -= '0'; ISOCTAL ((unsigned char)seq[i]) && temp--; i++)
+	        c = (c * 8) + OCTVALUE (seq[i]);
+	      i--;	/* auto-increment in for loop */
+	      c &= largest_char;
+	      break;
+	    case 'x':
+	      i++;
+	      for (temp = 2, c = 0; ISXDIGIT ((unsigned char)seq[i]) && temp--; i++)
+	        c = (c * 16) + HEXVALUE (seq[i]);
+	      if (temp == 2)
+	        c = 'x';
+	      i--;	/* auto-increment in for loop */
+	      c &= largest_char;
+	      break;
+	    default:	/* backslashes before non-special chars just add the char */
+	      c &= largest_char;
+	      break;	/* the backslash is stripped */
+	    }
+	}
+
+      /* Process \C- and \M- flags */
+      if (has_control)
+	{
+	  /* Special treatment for C-? */
+	  c = (c == '?') ? RUBOUT : CTRL (_rl_to_upper (c));
+	  has_control = 0;
+	}
+      if (has_meta)
+	{
+	  c = META (c);
+	  has_meta = 0;
+	}
+
+      /* If convert-meta is turned on, convert a meta char to a key sequence  */
+      if (META_CHAR (c) && _rl_convert_meta_chars_to_ascii)
+	{
+	  array[l++] = ESC;	/* ESC is meta-prefix */
+	  array[l++] = UNMETA (c);
+	}
+      else
+	array[l++] = (c);
+
+      /* Null characters may be processed for incomplete prefixes at the end of
+	 sequence */
+      if (seq[i] == '\0')
+	break;
+    }
+
+  *len = l;
+  array[l] = '\0';
+  return (0);
+}
+
+static int
+_rl_isescape (int c)
+{
+  switch (c)
+    {
+    case '\007':
+    case '\b':
+    case '\f':
+    case '\n':
+    case '\r':
+    case TAB:
+    case 0x0b:  return (1);
+    default: return (0);
+    }
+}
+
+static int
+_rl_escchar (int c)
+{
+  switch (c)
+    {
+    case '\007':  return ('a');
+    case '\b':  return ('b');
+    case '\f':  return ('f');
+    case '\n':  return ('n');
+    case '\r':  return ('r');
+    case TAB:  return ('t');
+    case 0x0b:  return ('v');
+    default: return (c);
+    }
+}
+
+char *
+rl_untranslate_keyseq (int seq)
+{
+  static char kseq[16];
+  int i, c;
+
+  i = 0;
+  c = seq;
+  if (META_CHAR (c))
+    {
+      kseq[i++] = '\\';
+      kseq[i++] = 'M';
+      kseq[i++] = '-';
+      c = UNMETA (c);
+    }
+  else if (c == ESC)
+    {
+      kseq[i++] = '\\';
+      c = 'e';
+    }
+  else if (CTRL_CHAR (c))
+    {
+      kseq[i++] = '\\';
+      kseq[i++] = 'C';
+      kseq[i++] = '-';
+      c = _rl_to_lower (UNCTRL (c));
+    }
+  else if (c == RUBOUT)
+    {
+      kseq[i++] = '\\';
+      kseq[i++] = 'C';
+      kseq[i++] = '-';
+      c = '?';
+    }
+
+  if (c == ESC)
+    {
+      kseq[i++] = '\\';
+      c = 'e';
+    }
+  else if (c == '\\' || c == '"')
+    {
+      kseq[i++] = '\\';
+    }
+
+  kseq[i++] = (unsigned char) c;
+  kseq[i] = '\0';
+  return kseq;
+}
+
+char *
+_rl_untranslate_macro_value (char *seq, int use_escapes)
+{
+  char *ret, *r, *s;
+  int c;
+
+  r = ret = (char *)xmalloc (7 * strlen (seq) + 1);
+  for (s = seq; *s; s++)
+    {
+      c = *s;
+      if (META_CHAR (c))
+	{
+	  *r++ = '\\';
+	  *r++ = 'M';
+	  *r++ = '-';
+	  c = UNMETA (c);
+	}
+      else if (c == ESC)
+	{
+	  *r++ = '\\';
+	  c = 'e';
+	}
+      else if (CTRL_CHAR (c))
+	{
+	  *r++ = '\\';
+	  if (use_escapes && _rl_isescape (c))
+	    c = _rl_escchar (c);
+	  else
+	    {
+	      *r++ = 'C';
+	      *r++ = '-';
+	      c = _rl_to_lower (UNCTRL (c));
+	    }
+	}
+      else if (c == RUBOUT)
+ 	{
+ 	  *r++ = '\\';
+ 	  *r++ = 'C';
+ 	  *r++ = '-';
+ 	  c = '?';
+ 	}
+
+      if (c == ESC)
+	{
+	  *r++ = '\\';
+	  c = 'e';
+	}
+      else if (c == '\\' || c == '"')
+	*r++ = '\\';
+
+      *r++ = (unsigned char)c;
+    }
+  *r = '\0';
+  return ret;
+}
+
+/* Return a pointer to the function that STRING represents.
+   If STRING doesn't have a matching function, then a NULL pointer
+   is returned. The string match is case-insensitive. */
+rl_command_func_t *
+rl_named_function (const char *string)
+{
+  register int i;
+
+  rl_initialize_funmap ();
+
+  for (i = 0; funmap[i]; i++)
+    if (_rl_stricmp (funmap[i]->name, string) == 0)
+      return (funmap[i]->function);
+  return ((rl_command_func_t *)NULL);
+}
+
+/* Return the function (or macro) definition which would be invoked via
+   KEYSEQ if executed in MAP.  If MAP is NULL, then the current keymap is
+   used.  TYPE, if non-NULL, is a pointer to an int which will receive the
+   type of the object pointed to.  One of ISFUNC (function), ISKMAP (keymap),
+   or ISMACR (macro). */
+static rl_command_func_t *
+_rl_function_of_keyseq_internal (const char *keyseq, size_t len, Keymap map, int *type)
+{
+  register int i;
+
+  if (map == 0)
+    map = _rl_keymap;
+
+  for (i = 0; keyseq && i < len; i++)
+    {
+      unsigned char ic = keyseq[i];
+
+      if (META_CHAR (ic) && _rl_convert_meta_chars_to_ascii)
+	{
+	  if (map[ESC].type == ISKMAP)
+	    {
+	      map = FUNCTION_TO_KEYMAP (map, ESC);
+	      ic = UNMETA (ic);
+	    }
+	  /* XXX - should we just return NULL here, since this obviously
+	     doesn't match? */
+	  else
+	    {
+	      if (type)
+		*type = map[ESC].type;
+
+	      return (map[ESC].function);
+	    }
+	}
+
+      if (map[ic].type == ISKMAP)
+	{
+	  /* If this is the last key in the key sequence, return the
+	     map. */
+	  if (i + 1 == len)
+	    {
+	      if (type)
+		*type = ISKMAP;
+
+	      return (map[ic].function);
+	    }
+	  else
+	    map = FUNCTION_TO_KEYMAP (map, ic);
+	}
+      /* If we're not at the end of the key sequence, and the current key
+	 is bound to something other than a keymap, then the entire key
+	 sequence is not bound. */
+      else if (map[ic].type != ISKMAP && i+1 < len)
+	return ((rl_command_func_t *)NULL);
+      else	/* map[ic].type != ISKMAP && i+1 == len */
+	{
+	  if (type)
+	    *type = map[ic].type;
+
+	  return (map[ic].function);
+	}
+    }
+  return ((rl_command_func_t *) NULL);
+}
+
+rl_command_func_t *
+rl_function_of_keyseq (const char *keyseq, Keymap map, int *type)
+{
+  return _rl_function_of_keyseq_internal (keyseq, strlen (keyseq), map, type);
+}
+
+rl_command_func_t *
+rl_function_of_keyseq_len (const char *keyseq, size_t len, Keymap map, int *type)
+{
+  return _rl_function_of_keyseq_internal (keyseq, len, map, type);
+}
+
+/* The last key bindings file read. */
+static char *last_readline_init_file = (char *)NULL;
+
+/* The file we're currently reading key bindings from. */
+static const char *current_readline_init_file;
+static int current_readline_init_include_level;
+static int current_readline_init_lineno;
+
+/* Read FILENAME into a locally-allocated buffer and return the buffer.
+   The size of the buffer is returned in *SIZEP.  Returns NULL if any
+   errors were encountered. */
+static char *
+_rl_read_file (char *filename, size_t *sizep)
+{
+  struct stat finfo;
+  size_t file_size;
+  char *buffer;
+  int i, file;
+
+  file = -1;
+  if (((file = open (filename, O_RDONLY, 0666)) < 0) || (fstat (file, &finfo) < 0))
+    {
+      if (file >= 0)
+	close (file);
+      return ((char *)NULL);
+    }
+
+  file_size = (size_t)finfo.st_size;
+
+  /* check for overflow on very large files */
+  if (file_size != finfo.st_size || file_size + 1 < file_size)
+    {
+      if (file >= 0)
+	close (file);
+#if defined (EFBIG)
+      errno = EFBIG;
+#endif
+      return ((char *)NULL);
+    }
+
+  /* Read the file into BUFFER. */
+  buffer = (char *)xmalloc (file_size + 1);
+  i = read (file, buffer, file_size);
+  close (file);
+
+  if (i < 0)
+    {
+      xfree (buffer);
+      return ((char *)NULL);
+    }
+
+  RL_CHECK_SIGNALS ();
+
+  buffer[i] = '\0';
+  if (sizep)
+    *sizep = i;
+
+  return (buffer);
+}
+
+/* Re-read the current keybindings file. */
+int
+rl_re_read_init_file (int count, int ignore)
+{
+  int r;
+  r = rl_read_init_file ((const char *)NULL);
+  rl_set_keymap_from_edit_mode ();
+  return r;
+}
+
+/* Do key bindings from a file.  If FILENAME is NULL it defaults
+   to the first non-null filename from this list:
+     1. the filename used for the previous call
+     2. the value of the shell variable `INPUTRC'
+     3. ~/.inputrc
+     4. /etc/inputrc
+   If the file existed and could be opened and read, 0 is returned,
+   otherwise errno is returned. */
+int
+rl_read_init_file (const char *filename)
+{
+  /* Default the filename. */
+  if (filename == 0)
+    filename = last_readline_init_file;
+  if (filename == 0)
+    filename = sh_get_env_value ("INPUTRC");
+  if (filename == 0 || *filename == 0)
+    {
+      filename = DEFAULT_INPUTRC;
+      /* Try to read DEFAULT_INPUTRC; fall back to SYS_INPUTRC on failure */
+      if (_rl_read_init_file (filename, 0) == 0)
+	return 0;
+      filename = SYS_INPUTRC;
+    }
+
+#if defined (__MSDOS__)
+  if (_rl_read_init_file (filename, 0) == 0)
+    return 0;
+  filename = "~/_inputrc";
+#endif
+  return (_rl_read_init_file (filename, 0));
+}
+
+static int
+_rl_read_init_file (const char *filename, int include_level)
+{
+  register int i;
+  char *buffer, *openname, *line, *end;
+  size_t file_size;
+
+  current_readline_init_file = filename;
+  current_readline_init_include_level = include_level;
+
+  openname = tilde_expand (filename);
+  buffer = _rl_read_file (openname, &file_size);
+  xfree (openname);
+
+  RL_CHECK_SIGNALS ();
+  if (buffer == 0)
+    return (errno);
+  
+  if (include_level == 0 && filename != last_readline_init_file)
+    {
+      FREE (last_readline_init_file);
+      last_readline_init_file = savestring (filename);
+    }
+
+  currently_reading_init_file = 1;
+
+  /* Loop over the lines in the file.  Lines that start with `#' are
+     comments; all other lines are commands for readline initialization. */
+  current_readline_init_lineno = 1;
+  line = buffer;
+  end = buffer + file_size;
+  while (line < end)
+    {
+      /* Find the end of this line. */
+      for (i = 0; line + i != end && line[i] != '\n'; i++);
+
+#if defined (__CYGWIN__)
+      /* ``Be liberal in what you accept.'' */
+      if (line[i] == '\n' && line[i-1] == '\r')
+	line[i - 1] = '\0';
+#endif
+
+      /* Mark end of line. */
+      line[i] = '\0';
+
+      /* Skip leading whitespace. */
+      while (*line && whitespace (*line))
+        {
+	  line++;
+	  i--;
+        }
+
+      /* If the line is not a comment, then parse it. */
+      if (*line && *line != '#')
+	rl_parse_and_bind (line);
+
+      /* Move to the next line. */
+      line += i + 1;
+      current_readline_init_lineno++;
+    }
+
+  xfree (buffer);
+  currently_reading_init_file = 0;
+  return (0);
+}
+
+static void
+#if defined (PREFER_STDARG)
+_rl_init_file_error (const char *format, ...)
+#else
+_rl_init_file_error (va_alist)
+     va_dcl
+#endif
+{
+  va_list args;
+#if defined (PREFER_VARARGS)
+  char *format;
+#endif
+
+#if defined (PREFER_STDARG)
+  va_start (args, format);
+#else
+  va_start (args);
+  format = va_arg (args, char *);
+#endif
+
+  fprintf (stderr, "readline: ");
+  if (currently_reading_init_file)
+    fprintf (stderr, "%s: line %d: ", current_readline_init_file,
+		     current_readline_init_lineno);
+
+  vfprintf (stderr, format, args);
+  fprintf (stderr, "\n");
+  fflush (stderr);
+
+  va_end (args);
+}
+
+/* **************************************************************** */
+/*								    */
+/*			Parser Helper Functions       		    */
+/*								    */
+/* **************************************************************** */
+
+static int
+parse_comparison_op (s, indp)
+     const char *s;
+     int *indp;
+{
+  int i, peekc, op;
+
+  if (OPSTART (s[*indp]) == 0)
+    return -1;
+  i = *indp;
+  peekc = s[i] ? s[i+1] : 0;
+  op = -1;
+
+  if (s[i] == '=')
+    {
+      op = OP_EQ;
+      if (peekc == '=')
+        i++;
+      i++;
+    }
+  else if (s[i] == '!' && peekc == '=')
+    {
+      op = OP_NE;
+      i += 2;
+    }
+  else if (s[i] == '<' && peekc == '=')
+    {
+      op = OP_LE;
+      i += 2;
+    }
+  else if (s[i] == '>' && peekc == '=')
+    {
+      op = OP_GE;
+      i += 2;
+    }
+  else if (s[i] == '<')
+    {
+      op = OP_LT;
+      i += 1;
+    }
+  else if (s[i] == '>')
+    {
+      op = OP_GT;
+      i += 1;
+    }
+
+  *indp = i;
+  return op;        
+}
+
+/* **************************************************************** */
+/*								    */
+/*			Parser Directives       		    */
+/*								    */
+/* **************************************************************** */
+
+typedef int _rl_parser_func_t PARAMS((char *));
+
+/* Things that mean `Control'. */
+const char * const _rl_possible_control_prefixes[] = {
+  "Control-", "C-", "CTRL-", (const char *)NULL
+};
+
+const char * const _rl_possible_meta_prefixes[] = {
+  "Meta", "M-", (const char *)NULL
+};
+
+/* Conditionals. */
+
+/* Calling programs set this to have their argv[0]. */
+const char *rl_readline_name = "other";
+
+/* Stack of previous values of parsing_conditionalized_out. */
+static unsigned char *if_stack = (unsigned char *)NULL;
+static int if_stack_depth;
+static int if_stack_size;
+
+/* Push _rl_parsing_conditionalized_out, and set parser state based
+   on ARGS. */
+static int
+parser_if (char *args)
+{
+  int i, llen, boolvar, strvar;
+
+  boolvar = strvar = -1;
+
+  /* Push parser state. */
+  if (if_stack_depth + 1 >= if_stack_size)
+    {
+      if (!if_stack)
+	if_stack = (unsigned char *)xmalloc (if_stack_size = 20);
+      else
+	if_stack = (unsigned char *)xrealloc (if_stack, if_stack_size += 20);
+    }
+  if_stack[if_stack_depth++] = _rl_parsing_conditionalized_out;
+
+  /* If parsing is turned off, then nothing can turn it back on except
+     for finding the matching endif.  In that case, return right now. */
+  if (_rl_parsing_conditionalized_out)
+    return 0;
+
+  llen = strlen (args);
+
+  /* Isolate first argument. */
+  for (i = 0; args[i] && !whitespace (args[i]); i++);
+
+  if (args[i])
+    args[i++] = '\0';
+
+  /* Handle "$if term=foo" and "$if mode=emacs" constructs.  If this
+     isn't term=foo, or mode=emacs, then check to see if the first
+     word in ARGS is the same as the value stored in rl_readline_name. */
+  if (rl_terminal_name && _rl_strnicmp (args, "term=", 5) == 0)
+    {
+      char *tem, *tname;
+
+      /* Terminals like "aaa-60" are equivalent to "aaa". */
+      tname = savestring (rl_terminal_name);
+      tem = strchr (tname, '-');
+      if (tem)
+	*tem = '\0';
+
+      /* Test the `long' and `short' forms of the terminal name so that
+	 if someone has a `sun-cmd' and does not want to have bindings
+	 that will be executed if the terminal is a `sun', they can put
+	 `$if term=sun-cmd' into their .inputrc. */
+      _rl_parsing_conditionalized_out = _rl_stricmp (args + 5, tname) &&
+					_rl_stricmp (args + 5, rl_terminal_name);
+      xfree (tname);
+    }
+#if defined (VI_MODE)
+  else if (_rl_strnicmp (args, "mode=", 5) == 0)
+    {
+      int mode;
+
+      if (_rl_stricmp (args + 5, "emacs") == 0)
+	mode = emacs_mode;
+      else if (_rl_stricmp (args + 5, "vi") == 0)
+	mode = vi_mode;
+      else
+	mode = no_mode;
+
+      _rl_parsing_conditionalized_out = mode != rl_editing_mode;
+    }
+#endif /* VI_MODE */
+  else if (_rl_strnicmp (args, "version", 7) == 0)
+    {
+      int rlversion, versionarg, op, previ, major, minor;
+
+      _rl_parsing_conditionalized_out = 1;
+      rlversion = RL_VERSION_MAJOR*10 + RL_VERSION_MINOR;
+      /* if "version" is separated from the operator by whitespace, or the
+         operand is separated from the operator by whitespace, restore it.
+         We're more liberal with allowed whitespace for this variable. */
+      if (i > 0 && i <= llen && args[i-1] == '\0')
+        args[i-1] = ' ';
+      args[llen] = '\0';		/* just in case */
+      for (i = 7; whitespace (args[i]); i++)
+	;
+      if (OPSTART(args[i]) == 0)
+	{
+	  _rl_init_file_error ("comparison operator expected, found `%s'", args[i] ? args + i : "end-of-line");
+	  return 0;
+	}
+      previ = i;
+      op = parse_comparison_op (args, &i);
+      if (op <= 0)
+	{
+	  _rl_init_file_error ("comparison operator expected, found `%s'", args+previ);
+	  return 0;
+	}
+      for ( ; args[i] && whitespace (args[i]); i++)
+	;
+      if (args[i] == 0 || _rl_digit_p (args[i]) == 0)
+	{
+	  _rl_init_file_error ("numeric argument expected, found `%s'", args+i);
+	  return 0;
+	}
+      major = minor = 0;
+      previ = i;
+      for ( ; args[i] && _rl_digit_p (args[i]); i++)
+	major = major*10 + _rl_digit_value (args[i]);
+      if (args[i] == '.')
+	{
+	  if (args[i + 1] && _rl_digit_p (args [i + 1]) == 0)
+	    {
+	      _rl_init_file_error ("numeric argument expected, found `%s'", args+previ);
+	      return 0;
+	    }
+	  for (++i; args[i] && _rl_digit_p (args[i]); i++)
+	    minor = minor*10 + _rl_digit_value (args[i]);
+	}
+      /* optional - check for trailing garbage on the line, allow whitespace
+	 and a trailing comment */
+      previ = i;
+      for ( ; args[i] && whitespace (args[i]); i++)
+	;
+      if (args[i] && args[i] != '#')
+	{
+	  _rl_init_file_error ("trailing garbage on line: `%s'", args+previ);
+	  return 0;
+	}
+      versionarg = major*10 + minor;
+
+      switch (op)
+	{
+	case OP_EQ:
+	  _rl_parsing_conditionalized_out = rlversion == versionarg;
+	  break;
+	case OP_NE:
+	  _rl_parsing_conditionalized_out = rlversion != versionarg;
+	  break;
+	case OP_GT:
+	  _rl_parsing_conditionalized_out = rlversion > versionarg;
+	  break;
+	case OP_GE:
+	  _rl_parsing_conditionalized_out = rlversion >= versionarg;
+	  break;
+	case OP_LT:
+	  _rl_parsing_conditionalized_out = rlversion < versionarg;
+	  break;
+	case OP_LE:
+	  _rl_parsing_conditionalized_out = rlversion <= versionarg;
+	  break;
+	}
+    }
+  /* Check to see if the first word in ARGS is the same as the
+     value stored in rl_readline_name. */
+  else if (_rl_stricmp (args, rl_readline_name) == 0)
+    _rl_parsing_conditionalized_out = 0;
+  else if ((boolvar = find_boolean_var (args)) >= 0 || (strvar = find_string_var (args)) >= 0)
+    {
+      int op, previ;
+      size_t vlen;
+      const char *vname;
+      char *valuearg, *vval, prevc;
+
+      _rl_parsing_conditionalized_out = 1;
+      vname = (boolvar >= 0) ? boolean_varname (boolvar) : string_varname (strvar);
+      vlen = strlen (vname);
+      if (i > 0 && i <= llen && args[i-1] == '\0')
+        args[i-1] = ' ';
+      args[llen] = '\0';		/* just in case */
+      for (i = vlen; whitespace (args[i]); i++)
+	;
+      if (CMPSTART(args[i]) == 0)
+	{
+	  _rl_init_file_error ("equality comparison operator expected, found `%s'", args[i] ? args + i : "end-of-line");
+	  return 0;
+	}
+      previ = i;
+      op = parse_comparison_op (args, &i);
+      if (op != OP_EQ && op != OP_NE)
+	{
+	  _rl_init_file_error ("equality comparison operator expected, found `%s'", args+previ);
+	  return 0;
+	}
+      for ( ; args[i] && whitespace (args[i]); i++)
+	;
+      if (args[i] == 0)
+	{
+	  _rl_init_file_error ("argument expected, found `%s'", args+i);
+	  return 0;
+	}
+      previ = i;
+      valuearg = args + i;
+      for ( ; args[i] && whitespace (args[i]) == 0; i++)
+	;
+      prevc = args[i];
+      args[i] = '\0';		/* null-terminate valuearg */
+      vval = rl_variable_value (vname);
+      if (op == OP_EQ)
+        _rl_parsing_conditionalized_out = _rl_stricmp (vval, valuearg) != 0;
+      else if (op == OP_NE)
+        _rl_parsing_conditionalized_out = _rl_stricmp (vval, valuearg) == 0;
+      args[i] = prevc;
+    }
+  else
+    _rl_parsing_conditionalized_out = 1;
+  return 0;
+}
+
+/* Invert the current parser state if there is anything on the stack. */
+static int
+parser_else (char *args)
+{
+  register int i;
+
+  if (if_stack_depth == 0)
+    {
+      _rl_init_file_error ("$else found without matching $if");
+      return 0;
+    }
+
+#if 0
+  /* Check the previous (n - 1) levels of the stack to make sure that
+     we haven't previously turned off parsing. */
+  for (i = 0; i < if_stack_depth - 1; i++)
+#else
+  /* Check the previous (n) levels of the stack to make sure that
+     we haven't previously turned off parsing. */
+  for (i = 0; i < if_stack_depth; i++)
+#endif
+    if (if_stack[i] == 1)
+      return 0;
+
+  /* Invert the state of parsing if at top level. */
+  _rl_parsing_conditionalized_out = !_rl_parsing_conditionalized_out;
+  return 0;
+}
+
+/* Terminate a conditional, popping the value of
+   _rl_parsing_conditionalized_out from the stack. */
+static int
+parser_endif (char *args)
+{
+  if (if_stack_depth)
+    _rl_parsing_conditionalized_out = if_stack[--if_stack_depth];
+  else
+    _rl_init_file_error ("$endif without matching $if");
+  return 0;
+}
+
+static int
+parser_include (char *args)
+{
+  const char *old_init_file;
+  char *e;
+  int old_line_number, old_include_level, r;
+
+  if (_rl_parsing_conditionalized_out)
+    return (0);
+
+  old_init_file = current_readline_init_file;
+  old_line_number = current_readline_init_lineno;
+  old_include_level = current_readline_init_include_level;
+
+  e = strchr (args, '\n');
+  if (e)
+    *e = '\0';
+  r = _rl_read_init_file ((const char *)args, old_include_level + 1);
+
+  current_readline_init_file = old_init_file;
+  current_readline_init_lineno = old_line_number;
+  current_readline_init_include_level = old_include_level;
+
+  return r;
+}
+  
+/* Associate textual names with actual functions. */
+static const struct {
+  const char * const name;
+  _rl_parser_func_t *function;
+} parser_directives [] = {
+  { "if", parser_if },
+  { "endif", parser_endif },
+  { "else", parser_else },
+  { "include", parser_include },
+  { (char *)0x0, (_rl_parser_func_t *)0x0 }
+};
+
+/* Handle a parser directive.  STATEMENT is the line of the directive
+   without any leading `$'. */
+static int
+handle_parser_directive (char *statement)
+{
+  register int i;
+  char *directive, *args;
+
+  /* Isolate the actual directive. */
+
+  /* Skip whitespace. */
+  for (i = 0; whitespace (statement[i]); i++);
+
+  directive = &statement[i];
+
+  for (; statement[i] && !whitespace (statement[i]); i++);
+
+  if (statement[i])
+    statement[i++] = '\0';
+
+  for (; statement[i] && whitespace (statement[i]); i++);
+
+  args = &statement[i];
+
+  /* Lookup the command, and act on it. */
+  for (i = 0; parser_directives[i].name; i++)
+    if (_rl_stricmp (directive, parser_directives[i].name) == 0)
+      {
+	(*parser_directives[i].function) (args);
+	return (0);
+      }
+
+  /* display an error message about the unknown parser directive */
+  _rl_init_file_error ("%s: unknown parser directive", directive);
+  return (1);
+}
+
+/* Start at STRING[START] and look for DELIM.  Return I where STRING[I] ==
+   DELIM or STRING[I] == 0.  DELIM is usually a double quote. */
+static int
+_rl_skip_to_delim (char *string, int start, int delim)
+{
+  int i, c, passc;
+
+  for (i = start,passc = 0; c = string[i]; i++)
+    {
+      if (passc)
+	{
+	  passc = 0;
+	  if (c == 0)
+	    break;
+	  continue;
+	}
+
+      if (c == '\\')
+	{
+	  passc = 1;
+	  continue;
+	}
+
+      if (c == delim)
+	break;
+    }
+
+  return i;
+}
+
+/* Read the binding command from STRING and perform it.
+   A key binding command looks like: Keyname: function-name\0,
+   a variable binding command looks like: set variable value.
+   A new-style keybinding looks like "\C-x\C-x": exchange-point-and-mark. */
+int
+rl_parse_and_bind (char *string)
+{
+  char *funname, *kname;
+  register int c, i;
+  int key, equivalency, foundmod, foundsep;
+
+  while (string && whitespace (*string))
+    string++;
+
+  if (string == 0 || *string == 0 || *string == '#')
+    return 0;
+
+  /* If this is a parser directive, act on it. */
+  if (*string == '$')
+    {
+      handle_parser_directive (&string[1]);
+      return 0;
+    }
+
+  /* If we aren't supposed to be parsing right now, then we're done. */
+  if (_rl_parsing_conditionalized_out)
+    return 0;
+
+  i = 0;
+  /* If this keyname is a complex key expression surrounded by quotes,
+     advance to after the matching close quote.  This code allows the
+     backslash to quote characters in the key expression. */
+  if (*string == '"')
+    {
+      i = _rl_skip_to_delim (string, 1, '"');
+
+      /* If we didn't find a closing quote, abort the line. */
+      if (string[i] == '\0')
+        {
+          _rl_init_file_error ("%s: no closing `\"' in key binding", string);
+          return 1;
+        }
+      else
+        i++;	/* skip past closing double quote */
+    }
+
+  /* Advance to the colon (:) or whitespace which separates the two objects. */
+  for (; (c = string[i]) && c != ':' && c != ' ' && c != '\t'; i++ );
+
+  if (i == 0)
+    {
+      _rl_init_file_error ("`%s': invalid key binding: missing key sequence", string);
+      return 1;
+    }
+
+  equivalency = (c == ':' && string[i + 1] == '=');
+
+  foundsep = c != 0;
+
+  /* Mark the end of the command (or keyname). */
+  if (string[i])
+    string[i++] = '\0';
+
+  /* If doing assignment, skip the '=' sign as well. */
+  if (equivalency)
+    string[i++] = '\0';
+
+  /* If this is a command to set a variable, then do that. */
+  if (_rl_stricmp (string, "set") == 0)
+    {
+      char *var, *value, *e;
+      int s;
+
+      var = string + i;
+      /* Make VAR point to start of variable name. */
+      while (*var && whitespace (*var)) var++;
+
+      /* Make VALUE point to start of value string. */
+      value = var;
+      while (*value && whitespace (*value) == 0) value++;
+      if (*value)
+	*value++ = '\0';
+      while (*value && whitespace (*value)) value++;
+
+      /* Strip trailing whitespace from values of boolean variables. */
+      if (find_boolean_var (var) >= 0)
+	{
+	  /* just read a whitespace-delimited word or empty string */
+	  for (e = value; *e && whitespace (*e) == 0; e++)
+	    ;
+	  if (e > value)
+	    *e = '\0';		/* cut off everything trailing */
+	}
+      else if ((i = find_string_var (var)) >= 0)
+	{
+	  /* Allow quoted strings in variable values */
+	  if (*value == '"')
+	    {
+	      i = _rl_skip_to_delim (value, 1, *value);
+	      value[i] = '\0';
+	      value++;	/* skip past the quote */
+	    }
+	  else
+	    {
+	      /* remove trailing whitespace */
+	      e = value + strlen (value) - 1;
+	      while (e >= value && whitespace (*e))
+		e--;
+	      e++;		/* skip back to whitespace or EOS */
+	  
+	      if (*e && e >= value)
+		*e = '\0';
+	    }
+	}
+      else
+	{
+	  /* avoid calling rl_variable_bind just to find this out */
+	  _rl_init_file_error ("%s: unknown variable name", var);
+	  return 1;
+	}
+
+      rl_variable_bind (var, value);
+      return 0;
+    }
+
+  /* Skip any whitespace between keyname and funname. */
+  for (; string[i] && whitespace (string[i]); i++);
+  funname = &string[i];
+
+  /* Now isolate funname.
+     For straight function names just look for whitespace, since
+     that will signify the end of the string.  But this could be a
+     macro definition.  In that case, the string is quoted, so skip
+     to the matching delimiter.  We allow the backslash to quote the
+     delimiter characters in the macro body. */
+  /* This code exists to allow whitespace in macro expansions, which
+     would otherwise be gobbled up by the next `for' loop.*/
+  /* XXX - it may be desirable to allow backslash quoting only if " is
+     the quoted string delimiter, like the shell. */
+  if (*funname == '\'' || *funname == '"')
+    {
+      i = _rl_skip_to_delim (string, i+1, *funname);
+      if (string[i])
+	i++;
+      else
+	{
+	  _rl_init_file_error ("`%s': missing closing quote for macro", funname);
+	  return 1;
+	}
+    }
+
+  /* Advance to the end of the string.  */
+  for (; string[i] && whitespace (string[i]) == 0; i++);
+
+  /* No extra whitespace at the end of the string. */
+  string[i] = '\0';
+
+  /* Handle equivalency bindings here.  Make the left-hand side be exactly
+     whatever the right-hand evaluates to, including keymaps. */
+  if (equivalency)
+    {
+      return 0;
+    }
+
+  if (foundsep == 0)
+    {
+      _rl_init_file_error ("%s: no key sequence terminator", string);
+      return 1;
+    }
+
+  /* If this is a new-style key-binding, then do the binding with
+     rl_bind_keyseq ().  Otherwise, let the older code deal with it. */
+  if (*string == '"')
+    {
+      char *seq;
+      register int j, k, passc;
+
+      seq = (char *)xmalloc (1 + strlen (string));
+      for (j = 1, k = passc = 0; string[j]; j++)
+	{
+	  /* Allow backslash to quote characters, but leave them in place.
+	     This allows a string to end with a backslash quoting another
+	     backslash, or with a backslash quoting a double quote.  The
+	     backslashes are left in place for rl_translate_keyseq (). */
+	  if (passc || (string[j] == '\\'))
+	    {
+	      seq[k++] = string[j];
+	      passc = !passc;
+	      continue;
+	    }
+
+	  if (string[j] == '"')
+	    break;
+
+	  seq[k++] = string[j];
+	}
+      seq[k] = '\0';
+
+      /* Binding macro? */
+      if (*funname == '\'' || *funname == '"')
+	{
+	  j = strlen (funname);
+
+	  /* Remove the delimiting quotes from each end of FUNNAME. */
+	  if (j && funname[j - 1] == *funname)
+	    funname[j - 1] = '\0';
+
+	  rl_macro_bind (seq, &funname[1], _rl_keymap);
+	}
+      else
+	rl_bind_keyseq (seq, rl_named_function (funname));
+
+      xfree (seq);
+      return 0;
+    }
+
+  /* Get the actual character we want to deal with. */
+  kname = strrchr (string, '-');
+  if (kname == 0)
+    kname = string;
+  else
+    kname++;
+
+  key = glean_key_from_name (kname);
+
+  /* Add in control and meta bits. */
+  foundmod = 0;
+  if (substring_member_of_array (string, _rl_possible_control_prefixes))
+    {
+      key = CTRL (_rl_to_upper (key));
+      foundmod = 1;
+    }
+
+  if (substring_member_of_array (string, _rl_possible_meta_prefixes))
+    {
+      key = META (key);
+      foundmod = 1;
+    }
+
+  if (foundmod == 0 && kname != string)
+    {
+      _rl_init_file_error ("%s: unknown key modifier", string);
+      return 1;
+    }
+
+  /* Temporary.  Handle old-style keyname with macro-binding. */
+  if (*funname == '\'' || *funname == '"')
+    {
+      char useq[2];
+      int fl = strlen (funname);
+
+      useq[0] = key; useq[1] = '\0';
+      if (fl && funname[fl - 1] == *funname)
+	funname[fl - 1] = '\0';
+
+      rl_macro_bind (useq, &funname[1], _rl_keymap);
+    }
+#if defined (PREFIX_META_HACK)
+  /* Ugly, but working hack to keep prefix-meta around. */
+  else if (_rl_stricmp (funname, "prefix-meta") == 0)
+    {
+      char seq[2];
+
+      seq[0] = key;
+      seq[1] = '\0';
+      rl_generic_bind (ISKMAP, seq, (char *)emacs_meta_keymap, _rl_keymap);
+    }
+#endif /* PREFIX_META_HACK */
+  else
+    rl_bind_key (key, rl_named_function (funname));
+
+  return 0;
+}
+
+/* Simple structure for boolean readline variables (i.e., those that can
+   have one of two values; either "On" or 1 for truth, or "Off" or 0 for
+   false. */
+
+#define V_SPECIAL	0x1
+
+static const struct {
+  const char * const name;
+  int *value;
+  int flags;
+} boolean_varlist [] = {
+  { "bind-tty-special-chars",	&_rl_bind_stty_chars,		0 },
+  { "blink-matching-paren",	&rl_blink_matching_paren,	V_SPECIAL },
+  { "byte-oriented",		&rl_byte_oriented,		0 },
+#if defined (COLOR_SUPPORT)
+  { "colored-completion-prefix",&_rl_colored_completion_prefix,	0 },
+  { "colored-stats",		&_rl_colored_stats,		0 },
+#endif
+  { "completion-ignore-case",	&_rl_completion_case_fold,	0 },
+  { "completion-map-case",	&_rl_completion_case_map,	0 },
+  { "convert-meta",		&_rl_convert_meta_chars_to_ascii, 0 },
+  { "disable-completion",	&rl_inhibit_completion,		0 },
+  { "echo-control-characters",	&_rl_echo_control_chars,	0 },
+  { "enable-bracketed-paste",	&_rl_enable_bracketed_paste,	V_SPECIAL },
+  { "enable-keypad",		&_rl_enable_keypad,		0 },
+  { "enable-meta-key",		&_rl_enable_meta,		0 },
+  { "expand-tilde",		&rl_complete_with_tilde_expansion, 0 },
+  { "history-preserve-point",	&_rl_history_preserve_point,	0 },
+  { "horizontal-scroll-mode",	&_rl_horizontal_scroll_mode,	0 },
+  { "input-meta",		&_rl_meta_flag,			0 },
+  { "mark-directories",		&_rl_complete_mark_directories,	0 },
+  { "mark-modified-lines",	&_rl_mark_modified_lines,	0 },
+  { "mark-symlinked-directories", &_rl_complete_mark_symlink_dirs, 0 },
+  { "match-hidden-files",	&_rl_match_hidden_files,	0 },
+  { "menu-complete-display-prefix", &_rl_menu_complete_prefix_first, 0 },
+  { "meta-flag",		&_rl_meta_flag,			0 },
+  { "output-meta",		&_rl_output_meta_chars,		0 },
+  { "page-completions",		&_rl_page_completions,		0 },
+  { "prefer-visible-bell",	&_rl_prefer_visible_bell,	V_SPECIAL },
+  { "print-completions-horizontally", &_rl_print_completions_horizontally, 0 },
+  { "revert-all-at-newline",	&_rl_revert_all_at_newline,	0 },
+  { "show-all-if-ambiguous",	&_rl_complete_show_all,		0 },
+  { "show-all-if-unmodified",	&_rl_complete_show_unmodified,	0 },
+  { "show-mode-in-prompt",	&_rl_show_mode_in_prompt,	0 },
+  { "skip-completed-text",	&_rl_skip_completed_text,	0 },
+#if defined (VISIBLE_STATS)
+  { "visible-stats",		&rl_visible_stats,		0 },
+#endif /* VISIBLE_STATS */
+  { (char *)NULL, (int *)NULL, 0 }
+};
+
+static int
+find_boolean_var (const char *name)
+{
+  register int i;
+
+  for (i = 0; boolean_varlist[i].name; i++)
+    if (_rl_stricmp (name, boolean_varlist[i].name) == 0)
+      return i;
+  return -1;
+}
+
+static const char *
+boolean_varname (int i)
+{
+  return ((i >= 0) ? boolean_varlist[i].name : (char *)NULL);
+}  
+
+/* Hooks for handling special boolean variables, where a
+   function needs to be called or another variable needs
+   to be changed when they're changed. */
+static void
+hack_special_boolean_var (int i)
+{
+  const char *name;
+
+  name = boolean_varlist[i].name;
+
+  if (_rl_stricmp (name, "blink-matching-paren") == 0)
+    _rl_enable_paren_matching (rl_blink_matching_paren);
+  else if (_rl_stricmp (name, "prefer-visible-bell") == 0)
+    {
+      if (_rl_prefer_visible_bell)
+	_rl_bell_preference = VISIBLE_BELL;
+      else
+	_rl_bell_preference = AUDIBLE_BELL;
+    }
+  else if (_rl_stricmp (name, "show-mode-in-prompt") == 0)
+    _rl_reset_prompt ();
+  else if (_rl_stricmp (name, "enable-bracketed-paste") == 0)
+    _rl_enable_active_region = _rl_enable_bracketed_paste;
+}
+
+typedef int _rl_sv_func_t PARAMS((const char *));
+
+/* These *must* correspond to the array indices for the appropriate
+   string variable.  (Though they're not used right now.) */
+#define V_BELLSTYLE	0
+#define V_COMBEGIN	1
+#define V_EDITMODE	2
+#define V_ISRCHTERM	3
+#define V_KEYMAP	4
+
+#define	V_STRING	1
+#define V_INT		2
+
+/* Forward declarations */
+static int sv_bell_style PARAMS((const char *));
+static int sv_combegin PARAMS((const char *));
+static int sv_dispprefix PARAMS((const char *));
+static int sv_compquery PARAMS((const char *));
+static int sv_compwidth PARAMS((const char *));
+static int sv_editmode PARAMS((const char *));
+static int sv_emacs_modestr PARAMS((const char *));
+static int sv_histsize PARAMS((const char *));
+static int sv_isrchterm PARAMS((const char *));
+static int sv_keymap PARAMS((const char *));
+static int sv_seqtimeout PARAMS((const char *));
+static int sv_viins_modestr PARAMS((const char *));
+static int sv_vicmd_modestr PARAMS((const char *));
+
+static const struct {
+  const char * const name;
+  int flags;
+  _rl_sv_func_t *set_func;
+} string_varlist[] = {
+  { "bell-style",	V_STRING,	sv_bell_style },
+  { "comment-begin",	V_STRING,	sv_combegin },
+  { "completion-display-width", V_INT,	sv_compwidth },
+  { "completion-prefix-display-length", V_INT,	sv_dispprefix },
+  { "completion-query-items", V_INT,	sv_compquery },
+  { "editing-mode",	V_STRING,	sv_editmode },
+  { "emacs-mode-string", V_STRING,	sv_emacs_modestr },  
+  { "history-size",	V_INT,		sv_histsize },
+  { "isearch-terminators", V_STRING,	sv_isrchterm },
+  { "keymap",		V_STRING,	sv_keymap },
+  { "keyseq-timeout",	V_INT,		sv_seqtimeout },
+  { "vi-cmd-mode-string", V_STRING,	sv_vicmd_modestr }, 
+  { "vi-ins-mode-string", V_STRING,	sv_viins_modestr }, 
+  { (char *)NULL,	0, (_rl_sv_func_t *)0 }
+};
+
+static int
+find_string_var (const char *name)
+{
+  register int i;
+
+  for (i = 0; string_varlist[i].name; i++)
+    if (_rl_stricmp (name, string_varlist[i].name) == 0)
+      return i;
+  return -1;
+}
+
+static const char *
+string_varname (int i)
+{
+  return ((i >= 0) ? string_varlist[i].name : (char *)NULL);
+}  
+
+/* A boolean value that can appear in a `set variable' command is true if
+   the value is null or empty, `on' (case-insensitive), or "1".  All other
+   values result in 0 (false). */
+static int
+bool_to_int (const char *value)
+{
+  return (value == 0 || *value == '\0' ||
+		(_rl_stricmp (value, "on") == 0) ||
+		(value[0] == '1' && value[1] == '\0'));
+}
+
+char *
+rl_variable_value (const char *name)
+{
+  register int i;
+
+  /* Check for simple variables first. */
+  i = find_boolean_var (name);
+  if (i >= 0)
+    return (*boolean_varlist[i].value ? "on" : "off");
+
+  i = find_string_var (name);
+  if (i >= 0)
+    return (_rl_get_string_variable_value (string_varlist[i].name));
+
+  /* Unknown variable names return NULL. */
+  return (char *)NULL;
+}
+
+int
+rl_variable_bind (const char *name, const char *value)
+{
+  register int i;
+  int	v;
+
+  /* Check for simple variables first. */
+  i = find_boolean_var (name);
+  if (i >= 0)
+    {
+      *boolean_varlist[i].value = bool_to_int (value);
+      if (boolean_varlist[i].flags & V_SPECIAL)
+	hack_special_boolean_var (i);
+      return 0;
+    }
+
+  i = find_string_var (name);
+
+  /* For the time being, string names without a handler function are simply
+     ignored. */
+  if (i < 0 || string_varlist[i].set_func == 0)
+    {
+      if (i < 0)
+	_rl_init_file_error ("%s: unknown variable name", name);
+      return 0;
+    }
+
+  v = (*string_varlist[i].set_func) (value);
+  if (v != 0)
+    _rl_init_file_error ("%s: could not set value to `%s'", name, value);
+  return v;
+}
+
+static int
+sv_editmode (const char *value)
+{
+  if (_rl_strnicmp (value, "vi", 2) == 0)
+    {
+#if defined (VI_MODE)
+      _rl_keymap = vi_insertion_keymap;
+      rl_editing_mode = vi_mode;
+#endif /* VI_MODE */
+      return 0;
+    }
+  else if (_rl_strnicmp (value, "emacs", 5) == 0)
+    {
+      _rl_keymap = emacs_standard_keymap;
+      rl_editing_mode = emacs_mode;
+      return 0;
+    }
+  return 1;
+}
+
+static int
+sv_combegin (const char *value)
+{
+  if (value && *value)
+    {
+      FREE (_rl_comment_begin);
+      _rl_comment_begin = savestring (value);
+      return 0;
+    }
+  return 1;
+}
+
+static int
+sv_dispprefix (const char *value)
+{
+  int nval = 0;
+
+  if (value && *value)
+    {
+      nval = atoi (value);
+      if (nval < 0)
+	nval = 0;
+    }
+  _rl_completion_prefix_display_length = nval;
+  return 0;
+}
+
+static int
+sv_compquery (const char *value)
+{
+  int nval = 100;
+
+  if (value && *value)
+    {
+      nval = atoi (value);
+      if (nval < 0)
+	nval = 0;
+    }
+  rl_completion_query_items = nval;
+  return 0;
+}
+
+static int
+sv_compwidth (const char *value)
+{
+  int nval = -1;
+
+  if (value && *value)
+    nval = atoi (value);
+
+  _rl_completion_columns = nval;
+  return 0;
+}
+
+static int
+sv_histsize (const char *value)
+{
+  int nval;
+
+  nval = 500;
+  if (value && *value)
+    {
+      nval = atoi (value);
+      if (nval < 0)
+	{
+	  unstifle_history ();
+	  return 0;
+	}
+    }
+  stifle_history (nval);
+  return 0;
+}
+
+static int
+sv_keymap (const char *value)
+{
+  Keymap kmap;
+
+  kmap = rl_get_keymap_by_name (value);
+  if (kmap)
+    {
+      rl_set_keymap (kmap);
+      return 0;
+    }
+  return 1;
+}
+
+static int
+sv_seqtimeout (const char *value)
+{
+  int nval;
+
+  nval = 0;
+  if (value && *value)
+    {
+      nval = atoi (value);
+      if (nval < 0)
+	nval = 0;
+    }
+  _rl_keyseq_timeout = nval;
+  return 0;
+}
+
+static int
+sv_bell_style (const char *value)
+{
+  if (value == 0 || *value == '\0')
+    _rl_bell_preference = AUDIBLE_BELL;
+  else if (_rl_stricmp (value, "none") == 0 || _rl_stricmp (value, "off") == 0)
+    _rl_bell_preference = NO_BELL;
+  else if (_rl_stricmp (value, "audible") == 0 || _rl_stricmp (value, "on") == 0)
+    _rl_bell_preference = AUDIBLE_BELL;
+  else if (_rl_stricmp (value, "visible") == 0)
+    _rl_bell_preference = VISIBLE_BELL;
+  else
+    return 1;
+  return 0;
+}
+
+static int
+sv_isrchterm (const char *value)
+{
+  int beg, end, delim;
+  char *v;
+
+  if (value == 0)
+    return 1;
+
+  /* Isolate the value and translate it into a character string. */
+  v = savestring (value);
+  FREE (_rl_isearch_terminators);
+  if (v[0] == '"' || v[0] == '\'')
+    {
+      delim = v[0];
+      for (beg = end = 1; v[end] && v[end] != delim; end++)
+	;
+    }
+  else
+    {
+      for (beg = end = 0; v[end] && whitespace (v[end]) == 0; end++)
+	;
+    }
+
+  v[end] = '\0';
+
+  /* The value starts at v + beg.  Translate it into a character string. */
+  _rl_isearch_terminators = (char *)xmalloc (2 * strlen (v) + 1);
+  rl_translate_keyseq (v + beg, _rl_isearch_terminators, &end);
+  _rl_isearch_terminators[end] = '\0';
+
+  xfree (v);
+  return 0;
+}
+
+extern char *_rl_emacs_mode_str;
+
+static int
+sv_emacs_modestr (const char *value)
+{
+  if (value && *value)
+    {
+      FREE (_rl_emacs_mode_str);
+      _rl_emacs_mode_str = (char *)xmalloc (2 * strlen (value) + 1);
+      rl_translate_keyseq (value, _rl_emacs_mode_str, &_rl_emacs_modestr_len);
+      _rl_emacs_mode_str[_rl_emacs_modestr_len] = '\0';
+      return 0;
+    }
+  else if (value)
+    {
+      FREE (_rl_emacs_mode_str);
+      _rl_emacs_mode_str = (char *)xmalloc (1);
+      _rl_emacs_mode_str[_rl_emacs_modestr_len = 0] = '\0';
+      return 0;
+    }
+  else if (value == 0)
+    {
+      FREE (_rl_emacs_mode_str);
+      _rl_emacs_mode_str = 0;	/* prompt_modestr does the right thing */
+      _rl_emacs_modestr_len = 0;
+      return 0;
+    }
+  return 1;
+}
+
+static int
+sv_viins_modestr (const char *value)
+{
+  if (value && *value)
+    {
+      FREE (_rl_vi_ins_mode_str);
+      _rl_vi_ins_mode_str = (char *)xmalloc (2 * strlen (value) + 1);
+      rl_translate_keyseq (value, _rl_vi_ins_mode_str, &_rl_vi_ins_modestr_len);
+      _rl_vi_ins_mode_str[_rl_vi_ins_modestr_len] = '\0';
+      return 0;
+    }
+  else if (value)
+    {
+      FREE (_rl_vi_ins_mode_str);
+      _rl_vi_ins_mode_str = (char *)xmalloc (1);
+      _rl_vi_ins_mode_str[_rl_vi_ins_modestr_len = 0] = '\0';
+      return 0;
+    }
+  else if (value == 0)
+    {
+      FREE (_rl_vi_ins_mode_str);
+      _rl_vi_ins_mode_str = 0;	/* prompt_modestr does the right thing */
+      _rl_vi_ins_modestr_len = 0;
+      return 0;
+    }
+  return 1;
+}
+
+static int
+sv_vicmd_modestr (const char *value)
+{
+  if (value && *value)
+    {
+      FREE (_rl_vi_cmd_mode_str);
+      _rl_vi_cmd_mode_str = (char *)xmalloc (2 * strlen (value) + 1);
+      rl_translate_keyseq (value, _rl_vi_cmd_mode_str, &_rl_vi_cmd_modestr_len);
+      _rl_vi_cmd_mode_str[_rl_vi_cmd_modestr_len] = '\0';
+      return 0;
+    }
+  else if (value)
+    {
+      FREE (_rl_vi_cmd_mode_str);
+      _rl_vi_cmd_mode_str = (char *)xmalloc (1);
+      _rl_vi_cmd_mode_str[_rl_vi_cmd_modestr_len = 0] = '\0';
+      return 0;
+    }
+  else if (value == 0)
+    {
+      FREE (_rl_vi_cmd_mode_str);
+      _rl_vi_cmd_mode_str = 0;	/* prompt_modestr does the right thing */
+      _rl_vi_cmd_modestr_len = 0;
+      return 0;
+    }
+  return 1;
+}
+
+/* Return the character which matches NAME.
+   For example, `Space' returns ' '. */
+
+typedef struct {
+  const char * const name;
+  int value;
+} assoc_list;
+
+static const assoc_list name_key_alist[] = {
+  { "DEL", 0x7f },
+  { "ESC", '\033' },
+  { "Escape", '\033' },
+  { "LFD", '\n' },
+  { "Newline", '\n' },
+  { "RET", '\r' },
+  { "Return", '\r' },
+  { "Rubout", 0x7f },
+  { "SPC", ' ' },
+  { "Space", ' ' },
+  { "Tab", 0x09 },
+  { (char *)0x0, 0 }
+};
+
+static int
+glean_key_from_name (char *name)
+{
+  register int i;
+
+  for (i = 0; name_key_alist[i].name; i++)
+    if (_rl_stricmp (name, name_key_alist[i].name) == 0)
+      return (name_key_alist[i].value);
+
+  return (*(unsigned char *)name);	/* XXX was return (*name) */
+}
+
+/* Auxiliary functions to manage keymaps. */
+struct name_and_keymap {
+  char *name;
+  Keymap map;
+};
+
+static struct name_and_keymap builtin_keymap_names[] = {
+  { "emacs", emacs_standard_keymap },
+  { "emacs-standard", emacs_standard_keymap },
+  { "emacs-meta", emacs_meta_keymap },
+  { "emacs-ctlx", emacs_ctlx_keymap },
+#if defined (VI_MODE)
+  { "vi", vi_movement_keymap },
+  { "vi-move", vi_movement_keymap },
+  { "vi-command", vi_movement_keymap },
+  { "vi-insert", vi_insertion_keymap },
+#endif /* VI_MODE */
+  { (char *)0x0, (Keymap)0x0 }
+};
+
+/* -1 for NULL entry */
+#define NUM_BUILTIN_KEYMAPS (sizeof (builtin_keymap_names) / sizeof (builtin_keymap_names[0]) - 1)
+
+static struct name_and_keymap *keymap_names = builtin_keymap_names;
+
+static int
+_rl_get_keymap_by_name (const char *name)
+{
+  register int i;
+
+  for (i = 0; keymap_names[i].name; i++)
+    if (_rl_stricmp (name, keymap_names[i].name) == 0)
+      return (i);
+  return -1;
+}
+
+Keymap
+rl_get_keymap_by_name (const char *name)
+{
+  int i;
+
+  i = _rl_get_keymap_by_name (name);
+  return ((i >= 0) ? keymap_names[i].map : (Keymap) NULL);
+}
+
+static int
+_rl_get_keymap_by_map (Keymap map)
+{
+  register int i;
+
+  for (i = 0; keymap_names[i].name; i++)
+    if (map == keymap_names[i].map)
+      return (i);
+  return -1;
+}
+
+char *
+rl_get_keymap_name (Keymap map)
+{
+  int i;
+
+  i = _rl_get_keymap_by_map (map);
+  return ((i >= 0) ? keymap_names[i].name : (char *)NULL);
+}
+
+int
+rl_set_keymap_name (const char *name, Keymap map)
+{
+  int i, ni, mi;
+
+  /* First check whether or not we're trying to rename a builtin keymap */
+  mi = _rl_get_keymap_by_map (map);
+  if (mi >= 0 && mi < NUM_BUILTIN_KEYMAPS)
+    return -1;
+
+  /* Then reject attempts to set one of the builtin names to a new map */
+  ni = _rl_get_keymap_by_name (name);
+  if (ni >= 0 && ni < NUM_BUILTIN_KEYMAPS)
+    return -1;
+
+  /* Renaming a keymap we already added */
+  if (mi >= 0)	/* XXX - could be >= NUM_BUILTIN_KEYMAPS */
+    {
+      xfree (keymap_names[mi].name);
+      keymap_names[mi].name = savestring (name);
+      return mi;
+    }
+
+  /* Associating new keymap with existing name */
+  if (ni >= 0)
+    {
+      keymap_names[ni].map = map;
+      return ni;
+    }
+
+  for (i = 0; keymap_names[i].name; i++)
+    ;
+
+  if (keymap_names == builtin_keymap_names)
+    {
+      keymap_names = xmalloc ((i + 2) * sizeof (struct name_and_keymap));
+      memcpy (keymap_names, builtin_keymap_names, i * sizeof (struct name_and_keymap));
+    }
+  else
+    keymap_names = xrealloc (keymap_names, (i + 2) * sizeof (struct name_and_keymap));
+
+  keymap_names[i].name = savestring (name);
+  keymap_names[i].map = map;
+
+  keymap_names[i+1].name = NULL;
+  keymap_names[i+1].map = NULL;
+
+  return i;
+}
+
+void
+rl_set_keymap (Keymap map)
+{
+  if (map)
+    _rl_keymap = map;
+}
+
+Keymap
+rl_get_keymap (void)
+{
+  return (_rl_keymap);
+}
+
+void
+rl_set_keymap_from_edit_mode (void)
+{
+  if (rl_editing_mode == emacs_mode)
+    _rl_keymap = emacs_standard_keymap;
+#if defined (VI_MODE)
+  else if (rl_editing_mode == vi_mode)
+    _rl_keymap = vi_insertion_keymap;
+#endif /* VI_MODE */
+}
+
+char *
+rl_get_keymap_name_from_edit_mode (void)
+{
+  if (rl_editing_mode == emacs_mode)
+    return "emacs";
+#if defined (VI_MODE)
+  else if (rl_editing_mode == vi_mode)
+    return "vi";
+#endif /* VI_MODE */
+  else
+    return "none";
+}
+
+/* **************************************************************** */
+/*								    */
+/*		  Key Binding and Function Information		    */
+/*								    */
+/* **************************************************************** */
+
+/* Each of the following functions produces information about the
+   state of keybindings and functions known to Readline.  The info
+   is always printed to rl_outstream, and in such a way that it can
+   be read back in (i.e., passed to rl_parse_and_bind ()). */
+
+/* Print the names of functions known to Readline. */
+void
+rl_list_funmap_names (void)
+{
+  register int i;
+  const char **funmap_names;
+
+  funmap_names = rl_funmap_names ();
+
+  if (!funmap_names)
+    return;
+
+  for (i = 0; funmap_names[i]; i++)
+    fprintf (rl_outstream, "%s\n", funmap_names[i]);
+
+  xfree (funmap_names);
+}
+
+static char *
+_rl_get_keyname (int key)
+{
+  char *keyname;
+  int i, c;
+
+  keyname = (char *)xmalloc (8);
+
+  c = key;
+  /* Since this is going to be used to write out keysequence-function
+     pairs for possible inclusion in an inputrc file, we don't want to
+     do any special meta processing on KEY. */
+
+#if 1
+  /* XXX - Experimental */
+  /* We might want to do this, but the old version of the code did not. */
+
+  /* If this is an escape character, we don't want to do any more processing.
+     Just add the special ESC key sequence and return. */
+  if (c == ESC)
+    {
+      keyname[0] = '\\';
+      keyname[1] = 'e';
+      keyname[2] = '\0';
+      return keyname;
+    }
+#endif
+
+  /* RUBOUT is translated directly into \C-? */
+  if (key == RUBOUT)
+    {
+      keyname[0] = '\\';
+      keyname[1] = 'C';
+      keyname[2] = '-';
+      keyname[3] = '?';
+      keyname[4] = '\0';
+      return keyname;
+    }
+
+  i = 0;
+  /* Now add special prefixes needed for control characters.  This can
+     potentially change C. */
+  if (CTRL_CHAR (c))
+    {
+      keyname[i++] = '\\';
+      keyname[i++] = 'C';
+      keyname[i++] = '-';
+      c = _rl_to_lower (UNCTRL (c));
+    }
+
+  /* XXX experimental code.  Turn the characters that are not ASCII or
+     ISO Latin 1 (128 - 159) into octal escape sequences (\200 - \237).
+     This changes C. */
+  if (c >= 128 && c <= 159)
+    {
+      keyname[i++] = '\\';
+      keyname[i++] = '2';
+      c -= 128;
+      keyname[i++] = (c / 8) + '0';
+      c = (c % 8) + '0';
+    }
+
+  /* Now, if the character needs to be quoted with a backslash, do that. */
+  if (c == '\\' || c == '"')
+    keyname[i++] = '\\';
+
+  /* Now add the key, terminate the string, and return it. */
+  keyname[i++] = (char) c;
+  keyname[i] = '\0';
+
+  return keyname;
+}
+
+/* Return a NULL terminated array of strings which represent the key
+   sequences that are used to invoke FUNCTION in MAP. */
+char **
+rl_invoking_keyseqs_in_map (rl_command_func_t *function, Keymap map)
+{
+  register int key;
+  char **result;
+  int result_index, result_size;
+
+  result = (char **)NULL;
+  result_index = result_size = 0;
+
+  for (key = 0; key < KEYMAP_SIZE; key++)
+    {
+      switch (map[key].type)
+	{
+	case ISMACR:
+	  /* Macros match, if, and only if, the pointers are identical.
+	     Thus, they are treated exactly like functions in here. */
+	case ISFUNC:
+	  /* If the function in the keymap is the one we are looking for,
+	     then add the current KEY to the list of invoking keys. */
+	  if (map[key].function == function)
+	    {
+	      char *keyname;
+
+	      keyname = _rl_get_keyname (key);
+
+	      if (result_index + 2 > result_size)
+	        {
+	          result_size += 10;
+		  result = (char **)xrealloc (result, result_size * sizeof (char *));
+	        }
+
+	      result[result_index++] = keyname;
+	      result[result_index] = (char *)NULL;
+	    }
+	  break;
+
+	case ISKMAP:
+	  {
+	    char **seqs;
+	    register int i;
+
+	    /* Find the list of keyseqs in this map which have FUNCTION as
+	       their target.  Add the key sequences found to RESULT. */
+	    if (map[key].function)
+	      seqs =
+	        rl_invoking_keyseqs_in_map (function, FUNCTION_TO_KEYMAP (map, key));
+	    else
+	      break;
+
+	    if (seqs == 0)
+	      break;
+
+	    for (i = 0; seqs[i]; i++)
+	      {
+		char *keyname = (char *)xmalloc (6 + strlen (seqs[i]));
+
+		if (key == ESC)
+		  {
+		    /* If ESC is the meta prefix and we're converting chars
+		       with the eighth bit set to ESC-prefixed sequences, then
+		       we can use \M-.  Otherwise we need to use the sequence
+		       for ESC. */
+		    if (_rl_convert_meta_chars_to_ascii && map[ESC].type == ISKMAP)
+		      sprintf (keyname, "\\M-");
+		    else
+		      sprintf (keyname, "\\e");
+		  }
+		else
+		  {
+		    int c = key, l = 0;
+		    if (CTRL_CHAR (c) || c == RUBOUT)
+		      {
+			keyname[l++] = '\\';
+			keyname[l++] = 'C';
+			keyname[l++] = '-';
+			c = (c == RUBOUT) ? '?' : _rl_to_lower (UNCTRL (c));
+		      }
+
+		    if (c == '\\' || c == '"')
+		      keyname[l++] = '\\';
+
+		    keyname[l++] = (char) c;
+		    keyname[l++] = '\0';
+		  }
+		
+		strcat (keyname, seqs[i]);
+		xfree (seqs[i]);
+
+		if (result_index + 2 > result_size)
+		  {
+		    result_size += 10;
+		    result = (char **)xrealloc (result, result_size * sizeof (char *));
+		  }
+
+		result[result_index++] = keyname;
+		result[result_index] = (char *)NULL;
+	      }
+
+	    xfree (seqs);
+	  }
+	  break;
+	}
+    }
+  return (result);
+}
+
+/* Return a NULL terminated array of strings which represent the key
+   sequences that can be used to invoke FUNCTION using the current keymap. */
+char **
+rl_invoking_keyseqs (rl_command_func_t *function)
+{
+  return (rl_invoking_keyseqs_in_map (function, _rl_keymap));
+}
+
+/* Print all of the functions and their bindings to rl_outstream.  If
+   PRINT_READABLY is non-zero, then print the output in such a way
+   that it can be read back in. */
+void
+rl_function_dumper (int print_readably)
+{
+  register int i;
+  const char **names;
+  const char *name;
+
+  names = rl_funmap_names ();
+
+  fprintf (rl_outstream, "\n");
+
+  for (i = 0; name = names[i]; i++)
+    {
+      rl_command_func_t *function;
+      char **invokers;
+
+      function = rl_named_function (name);
+      invokers = rl_invoking_keyseqs_in_map (function, _rl_keymap);
+
+      if (print_readably)
+	{
+	  if (!invokers)
+	    fprintf (rl_outstream, "# %s (not bound)\n", name);
+	  else
+	    {
+	      register int j;
+
+	      for (j = 0; invokers[j]; j++)
+		{
+		  fprintf (rl_outstream, "\"%s\": %s\n",
+			   invokers[j], name);
+		  xfree (invokers[j]);
+		}
+
+	      xfree (invokers);
+	    }
+	}
+      else
+	{
+	  if (!invokers)
+	    fprintf (rl_outstream, "%s is not bound to any keys\n",
+		     name);
+	  else
+	    {
+	      register int j;
+
+	      fprintf (rl_outstream, "%s can be found on ", name);
+
+	      for (j = 0; invokers[j] && j < 5; j++)
+		{
+		  fprintf (rl_outstream, "\"%s\"%s", invokers[j],
+			   invokers[j + 1] ? ", " : ".\n");
+		}
+
+	      if (j == 5 && invokers[j])
+		fprintf (rl_outstream, "...\n");
+
+	      for (j = 0; invokers[j]; j++)
+		xfree (invokers[j]);
+
+	      xfree (invokers);
+	    }
+	}
+    }
+
+  xfree (names);
+}
+
+/* Print all of the current functions and their bindings to
+   rl_outstream.  If an explicit argument is given, then print
+   the output in such a way that it can be read back in. */
+int
+rl_dump_functions (int count, int key)
+{
+  if (rl_dispatching)
+    fprintf (rl_outstream, "\r\n");
+  rl_function_dumper (rl_explicit_arg);
+  rl_on_new_line ();
+  return (0);
+}
+
+static void
+_rl_macro_dumper_internal (int print_readably, Keymap map, char *prefix)
+{
+  register int key;
+  char *keyname, *out;
+  int prefix_len;
+
+  for (key = 0; key < KEYMAP_SIZE; key++)
+    {
+      switch (map[key].type)
+	{
+	case ISMACR:
+	  keyname = _rl_get_keyname (key);
+	  out = _rl_untranslate_macro_value ((char *)map[key].function, 0);
+
+	  if (print_readably)
+	    fprintf (rl_outstream, "\"%s%s\": \"%s\"\n", prefix ? prefix : "",
+						         keyname,
+						         out ? out : "");
+	  else
+	    fprintf (rl_outstream, "%s%s outputs %s\n", prefix ? prefix : "",
+							keyname,
+							out ? out : "");
+	  xfree (keyname);
+	  xfree (out);
+	  break;
+	case ISFUNC:
+	  break;
+	case ISKMAP:
+	  prefix_len = prefix ? strlen (prefix) : 0;
+	  if (key == ESC)
+	    {
+	      keyname = (char *)xmalloc (3 + prefix_len);
+	      if (prefix)
+		strcpy (keyname, prefix);
+	      keyname[prefix_len] = '\\';
+	      keyname[prefix_len + 1] = 'e';
+	      keyname[prefix_len + 2] = '\0';
+	    }
+	  else
+	    {
+	      keyname = _rl_get_keyname (key);
+	      if (prefix)
+		{
+		  out = (char *)xmalloc (strlen (keyname) + prefix_len + 1);
+		  strcpy (out, prefix);
+		  strcpy (out + prefix_len, keyname);
+		  xfree (keyname);
+		  keyname = out;
+		}
+	    }
+
+	  _rl_macro_dumper_internal (print_readably, FUNCTION_TO_KEYMAP (map, key), keyname);
+	  xfree (keyname);
+	  break;
+	}
+    }
+}
+
+void
+rl_macro_dumper (int print_readably)
+{
+  _rl_macro_dumper_internal (print_readably, _rl_keymap, (char *)NULL);
+}
+
+int
+rl_dump_macros (int count, int key)
+{
+  if (rl_dispatching)
+    fprintf (rl_outstream, "\r\n");
+  rl_macro_dumper (rl_explicit_arg);
+  rl_on_new_line ();
+  return (0);
+}
+
+static char *
+_rl_get_string_variable_value (const char *name)
+{
+  static char numbuf[32];
+  char *ret;
+
+  if (_rl_stricmp (name, "bell-style") == 0)
+    {
+      switch (_rl_bell_preference)
+	{
+	  case NO_BELL:
+	    return "none";
+	  case VISIBLE_BELL:
+	    return "visible";
+	  case AUDIBLE_BELL:
+	  default:
+	    return "audible";
+	}
+    }
+  else if (_rl_stricmp (name, "comment-begin") == 0)
+    return (_rl_comment_begin ? _rl_comment_begin : RL_COMMENT_BEGIN_DEFAULT);
+  else if (_rl_stricmp (name, "completion-display-width") == 0)
+    {
+      sprintf (numbuf, "%d", _rl_completion_columns);
+      return (numbuf);
+    }
+  else if (_rl_stricmp (name, "completion-prefix-display-length") == 0)
+    {
+      sprintf (numbuf, "%d", _rl_completion_prefix_display_length);
+      return (numbuf);
+    }
+  else if (_rl_stricmp (name, "completion-query-items") == 0)
+    {
+      sprintf (numbuf, "%d", rl_completion_query_items);
+      return (numbuf);
+    }
+  else if (_rl_stricmp (name, "editing-mode") == 0)
+    return (rl_get_keymap_name_from_edit_mode ());
+  else if (_rl_stricmp (name, "history-size") == 0)
+    {
+      sprintf (numbuf, "%d", history_is_stifled() ? history_max_entries : 0);
+      return (numbuf);
+    }
+  else if (_rl_stricmp (name, "isearch-terminators") == 0)
+    {
+      if (_rl_isearch_terminators == 0)
+	return 0;
+      ret = _rl_untranslate_macro_value (_rl_isearch_terminators, 0);
+      if (ret)
+	{
+	  strncpy (numbuf, ret, sizeof (numbuf) - 1);
+	  xfree (ret);
+	  numbuf[sizeof(numbuf) - 1] = '\0';
+	}
+      else
+	numbuf[0] = '\0';
+      return numbuf;
+    }
+  else if (_rl_stricmp (name, "keymap") == 0)
+    {
+      ret = rl_get_keymap_name (_rl_keymap);
+      if (ret == 0)
+	ret = rl_get_keymap_name_from_edit_mode ();
+      return (ret ? ret : "none");
+    }
+  else if (_rl_stricmp (name, "keyseq-timeout") == 0)
+    {
+      sprintf (numbuf, "%d", _rl_keyseq_timeout);    
+      return (numbuf);
+    }
+  else if (_rl_stricmp (name, "emacs-mode-string") == 0)
+    return (_rl_emacs_mode_str ? _rl_emacs_mode_str : RL_EMACS_MODESTR_DEFAULT);
+  else if (_rl_stricmp (name, "vi-cmd-mode-string") == 0)
+    return (_rl_vi_cmd_mode_str ? _rl_vi_cmd_mode_str : RL_VI_CMD_MODESTR_DEFAULT);
+  else if (_rl_stricmp (name, "vi-ins-mode-string") == 0)
+    return (_rl_vi_ins_mode_str ? _rl_vi_ins_mode_str : RL_VI_INS_MODESTR_DEFAULT);
+  else
+    return (0);
+}
+
+void
+rl_variable_dumper (int print_readably)
+{
+  int i;
+  char *v;
+
+  for (i = 0; boolean_varlist[i].name; i++)
+    {
+      if (print_readably)
+        fprintf (rl_outstream, "set %s %s\n", boolean_varlist[i].name,
+			       *boolean_varlist[i].value ? "on" : "off");
+      else
+        fprintf (rl_outstream, "%s is set to `%s'\n", boolean_varlist[i].name,
+			       *boolean_varlist[i].value ? "on" : "off");
+    }
+
+  for (i = 0; string_varlist[i].name; i++)
+    {
+      v = _rl_get_string_variable_value (string_varlist[i].name);
+      if (v == 0)	/* _rl_isearch_terminators can be NULL */
+	continue;
+      if (print_readably)
+        fprintf (rl_outstream, "set %s %s\n", string_varlist[i].name, v);
+      else
+        fprintf (rl_outstream, "%s is set to `%s'\n", string_varlist[i].name, v);
+    }
+}
+
+/* Print all of the current variables and their values to
+   rl_outstream.  If an explicit argument is given, then print
+   the output in such a way that it can be read back in. */
+int
+rl_dump_variables (int count, int key)
+{
+  if (rl_dispatching)
+    fprintf (rl_outstream, "\r\n");
+  rl_variable_dumper (rl_explicit_arg);
+  rl_on_new_line ();
+  return (0);
+}
+
+/* Return non-zero if any members of ARRAY are a substring in STRING. */
+static int
+substring_member_of_array (const char *string, const char * const *array)
+{
+  while (*array)
+    {
+      if (_rl_strindex (string, *array))
+	return (1);
+      array++;
+    }
+  return (0);
+}
diff --git a/lib/readline/callback.c b/lib/readline/callback.c
new file mode 100644
index 0000000..a466cf9
--- /dev/null
+++ b/lib/readline/callback.c
@@ -0,0 +1,360 @@
+/* callback.c -- functions to use readline as an X `callback' mechanism. */
+
+/* Copyright (C) 1987-2017 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include "rlconf.h"
+
+#if defined (READLINE_CALLBACKS)
+
+#include <sys/types.h>
+
+#ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif
+
+#include <stdio.h>
+
+/* System-specific feature definitions and include files. */
+#include "rldefs.h"
+#include "readline.h"
+#include "rlprivate.h"
+#include "xmalloc.h"
+
+/* Private data for callback registration functions.  See comments in
+   rl_callback_read_char for more details. */
+_rl_callback_func_t *_rl_callback_func = 0;
+_rl_callback_generic_arg *_rl_callback_data = 0;
+
+/* Applications can set this to non-zero to have readline's signal handlers
+   installed during the entire duration of reading a complete line, as in
+   readline-6.2.  This should be used with care, because it can result in
+   readline receiving signals and not handling them until it's called again
+   via rl_callback_read_char, thereby stealing them from the application.
+   By default, signal handlers are only active while readline is active. */   
+int rl_persistent_signal_handlers = 0;
+
+/* **************************************************************** */
+/*								    */
+/*			Callback Readline Functions		    */
+/*								    */
+/* **************************************************************** */
+
+/* Allow using readline in situations where a program may have multiple
+   things to handle at once, and dispatches them via select().  Call
+   rl_callback_handler_install() with the prompt and a function to call
+   whenever a complete line of input is ready.  The user must then
+   call rl_callback_read_char() every time some input is available, and 
+   rl_callback_read_char() will call the user's function with the complete
+   text read in at each end of line.  The terminal is kept prepped
+   all the time, except during calls to the user's function.  Signal
+   handlers are only installed when the application calls back into
+   readline, so readline doesn't `steal' signals from the application.  */
+
+rl_vcpfunc_t *rl_linefunc;		/* user callback function */
+static int in_handler;		/* terminal_prepped and signals set? */
+
+/* Make sure the terminal is set up, initialize readline, and prompt. */
+static void
+_rl_callback_newline (void)
+{
+  rl_initialize ();
+
+  if (in_handler == 0)
+    {
+      in_handler = 1;
+
+      if (rl_prep_term_function)
+	(*rl_prep_term_function) (_rl_meta_flag);
+
+#if defined (HANDLE_SIGNALS)
+      if (rl_persistent_signal_handlers)
+	rl_set_signals ();
+#endif
+    }
+
+  readline_internal_setup ();
+  RL_CHECK_SIGNALS ();
+}
+
+/* Install a readline handler, set up the terminal, and issue the prompt. */
+void
+rl_callback_handler_install (const char *prompt, rl_vcpfunc_t *linefunc)
+{
+  rl_set_prompt (prompt);
+  RL_SETSTATE (RL_STATE_CALLBACK);
+  rl_linefunc = linefunc;
+  _rl_callback_newline ();
+}
+
+#if defined (HANDLE_SIGNALS)
+#define CALLBACK_READ_RETURN() \
+  do { \
+    if (rl_persistent_signal_handlers == 0) \
+      rl_clear_signals (); \
+    return; \
+  } while (0)
+#else
+#define CALLBACK_READ_RETURN() return
+#endif
+
+/* Read one character, and dispatch to the handler if it ends the line. */
+void
+rl_callback_read_char (void)
+{
+  char *line;
+  int eof, jcode;
+  static procenv_t olevel;
+
+  if (rl_linefunc == NULL)
+    {
+      _rl_errmsg ("readline_callback_read_char() called with no handler!");
+      abort ();
+    }
+
+  memcpy ((void *)olevel, (void *)_rl_top_level, sizeof (procenv_t));
+#if defined (HAVE_POSIX_SIGSETJMP)
+  jcode = sigsetjmp (_rl_top_level, 0);
+#else
+  jcode = setjmp (_rl_top_level);
+#endif
+  if (jcode)
+    {
+      (*rl_redisplay_function) ();
+      _rl_want_redisplay = 0;
+      memcpy ((void *)_rl_top_level, (void *)olevel, sizeof (procenv_t));
+      CALLBACK_READ_RETURN ();
+    }
+
+#if defined (HANDLE_SIGNALS)
+  /* Install signal handlers only when readline has control. */
+  if (rl_persistent_signal_handlers == 0)
+    rl_set_signals ();
+#endif
+
+  do
+    {
+      RL_CHECK_SIGNALS ();
+      if  (RL_ISSTATE (RL_STATE_ISEARCH))
+	{
+	  eof = _rl_isearch_callback (_rl_iscxt);
+	  if (eof == 0 && (RL_ISSTATE (RL_STATE_ISEARCH) == 0) && RL_ISSTATE (RL_STATE_INPUTPENDING))
+	    rl_callback_read_char ();
+
+	  CALLBACK_READ_RETURN ();
+	}
+      else if  (RL_ISSTATE (RL_STATE_NSEARCH))
+	{
+	  eof = _rl_nsearch_callback (_rl_nscxt);
+
+	  CALLBACK_READ_RETURN ();
+	}
+#if defined (VI_MODE)
+      /* States that can occur while in state VIMOTION have to be checked
+	 before RL_STATE_VIMOTION */
+      else if (RL_ISSTATE (RL_STATE_CHARSEARCH))
+	{
+	  int k;
+
+	  k = _rl_callback_data->i2;
+
+	  eof = (*_rl_callback_func) (_rl_callback_data);
+	  /* If the function `deregisters' itself, make sure the data is
+	     cleaned up. */
+	  if (_rl_callback_func == 0)	/* XXX - just sanity check */
+	    {
+	      if (_rl_callback_data)
+		{
+		  _rl_callback_data_dispose (_rl_callback_data);
+		  _rl_callback_data = 0;
+		}
+	    }
+
+	  /* Messy case where vi motion command can be char search */
+	  if (RL_ISSTATE (RL_STATE_VIMOTION))
+	    {
+	      _rl_vi_domove_motion_cleanup (k, _rl_vimvcxt);
+	      _rl_internal_char_cleanup ();
+	      CALLBACK_READ_RETURN ();	      
+	    }
+
+	  _rl_internal_char_cleanup ();
+	}
+      else if (RL_ISSTATE (RL_STATE_VIMOTION))
+	{
+	  eof = _rl_vi_domove_callback (_rl_vimvcxt);
+	  /* Should handle everything, including cleanup, numeric arguments,
+	     and turning off RL_STATE_VIMOTION */
+	  if (RL_ISSTATE (RL_STATE_NUMERICARG) == 0)
+	    _rl_internal_char_cleanup ();
+
+	  CALLBACK_READ_RETURN ();
+	}
+#endif
+      else if (RL_ISSTATE (RL_STATE_NUMERICARG))
+	{
+	  eof = _rl_arg_callback (_rl_argcxt);
+	  if (eof == 0 && (RL_ISSTATE (RL_STATE_NUMERICARG) == 0) && RL_ISSTATE (RL_STATE_INPUTPENDING))
+	    rl_callback_read_char ();
+	  /* XXX - this should handle _rl_last_command_was_kill better */
+	  else if (RL_ISSTATE (RL_STATE_NUMERICARG) == 0)
+	    _rl_internal_char_cleanup ();
+
+	  CALLBACK_READ_RETURN ();
+	}
+      else if (RL_ISSTATE (RL_STATE_MULTIKEY))
+	{
+	  eof = _rl_dispatch_callback (_rl_kscxt);	/* For now */
+	  while ((eof == -1 || eof == -2) && RL_ISSTATE (RL_STATE_MULTIKEY) && _rl_kscxt && (_rl_kscxt->flags & KSEQ_DISPATCHED))
+	    eof = _rl_dispatch_callback (_rl_kscxt);
+	  if (RL_ISSTATE (RL_STATE_MULTIKEY) == 0)
+	    {
+	      _rl_internal_char_cleanup ();
+	      _rl_want_redisplay = 1;
+	    }
+	}
+      else if (_rl_callback_func)
+	{
+	  /* This allows functions that simply need to read an additional
+	     character (like quoted-insert) to register a function to be
+	     called when input is available.  _rl_callback_data is a
+	     pointer to a struct that has the argument count originally
+	     passed to the registering function and space for any additional
+	     parameters.  */
+	  eof = (*_rl_callback_func) (_rl_callback_data);
+	  /* If the function `deregisters' itself, make sure the data is
+	     cleaned up. */
+	  if (_rl_callback_func == 0)
+	    {
+	      if (_rl_callback_data) 	
+		{
+		  _rl_callback_data_dispose (_rl_callback_data);
+		  _rl_callback_data = 0;
+		}
+	      _rl_internal_char_cleanup ();
+	    }
+	}
+      else
+	eof = readline_internal_char ();
+
+      RL_CHECK_SIGNALS ();
+      if (rl_done == 0 && _rl_want_redisplay)
+	{
+	  (*rl_redisplay_function) ();
+	  _rl_want_redisplay = 0;
+	}
+
+      if (rl_done)
+	{
+	  line = readline_internal_teardown (eof);
+
+	  if (rl_deprep_term_function)
+	    (*rl_deprep_term_function) ();
+#if defined (HANDLE_SIGNALS)
+	  rl_clear_signals ();
+#endif
+	  in_handler = 0;
+	  (*rl_linefunc) (line);
+
+	  /* If the user did not clear out the line, do it for him. */
+	  if (rl_line_buffer[0])
+	    _rl_init_line_state ();
+
+	  /* Redisplay the prompt if readline_handler_{install,remove}
+	     not called. */
+	  if (in_handler == 0 && rl_linefunc)
+	    _rl_callback_newline ();
+	}
+    }
+  while (rl_pending_input || _rl_pushed_input_available () || RL_ISSTATE (RL_STATE_MACROINPUT));
+
+  CALLBACK_READ_RETURN ();
+}
+
+/* Remove the handler, and make sure the terminal is in its normal state. */
+void
+rl_callback_handler_remove (void)
+{
+  rl_linefunc = NULL;
+  RL_UNSETSTATE (RL_STATE_CALLBACK);
+  RL_CHECK_SIGNALS ();
+  if (in_handler)
+    {
+      in_handler = 0;
+      if (rl_deprep_term_function)
+	(*rl_deprep_term_function) ();
+#if defined (HANDLE_SIGNALS)
+      rl_clear_signals ();
+#endif
+    }
+}
+
+_rl_callback_generic_arg *
+_rl_callback_data_alloc (int count)
+{
+  _rl_callback_generic_arg *arg;
+
+  arg = (_rl_callback_generic_arg *)xmalloc (sizeof (_rl_callback_generic_arg));
+  arg->count = count;
+
+  arg->i1 = arg->i2 = 0;
+
+  return arg;
+}
+
+void
+_rl_callback_data_dispose (_rl_callback_generic_arg *arg)
+{
+  xfree (arg);
+}
+
+/* Make sure that this agrees with cases in rl_callback_read_char */
+void
+rl_callback_sigcleanup (void)
+{
+  if (RL_ISSTATE (RL_STATE_CALLBACK) == 0)
+    return;
+
+  if (RL_ISSTATE (RL_STATE_ISEARCH))
+    _rl_isearch_cleanup (_rl_iscxt, 0);
+  else if (RL_ISSTATE (RL_STATE_NSEARCH))
+    _rl_nsearch_cleanup (_rl_nscxt, 0);
+  else if (RL_ISSTATE (RL_STATE_VIMOTION))
+    RL_UNSETSTATE (RL_STATE_VIMOTION);
+  else if (RL_ISSTATE (RL_STATE_NUMERICARG))
+    {
+      _rl_argcxt = 0;
+      RL_UNSETSTATE (RL_STATE_NUMERICARG);
+    }
+  else if (RL_ISSTATE (RL_STATE_MULTIKEY))
+    RL_UNSETSTATE (RL_STATE_MULTIKEY);
+  if (RL_ISSTATE (RL_STATE_CHARSEARCH))
+    RL_UNSETSTATE (RL_STATE_CHARSEARCH);
+
+  _rl_callback_func = 0;
+}
+#endif
diff --git a/lib/readline/chardefs.h b/lib/readline/chardefs.h
new file mode 100644
index 0000000..3cf1326
--- /dev/null
+++ b/lib/readline/chardefs.h
@@ -0,0 +1,164 @@
+/* chardefs.h -- Character definitions for readline. */
+
+/* Copyright (C) 1994-2015 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _CHARDEFS_H_
+#define _CHARDEFS_H_
+
+#include <ctype.h>
+
+#if defined (HAVE_CONFIG_H)
+#  if defined (HAVE_STRING_H)
+#    if ! defined (STDC_HEADERS) && defined (HAVE_MEMORY_H)
+#      include <memory.h>
+#    endif
+#    include <string.h>
+#  endif /* HAVE_STRING_H */
+#  if defined (HAVE_STRINGS_H)
+#    include <strings.h>
+#  endif /* HAVE_STRINGS_H */
+#else
+#  include <string.h>
+#endif /* !HAVE_CONFIG_H */
+
+#ifndef whitespace
+#define whitespace(c) (((c) == ' ') || ((c) == '\t'))
+#endif
+
+#ifdef CTRL
+#  undef CTRL
+#endif
+#ifdef UNCTRL
+#  undef UNCTRL
+#endif
+
+/* Some character stuff. */
+#define control_character_threshold 0x020   /* Smaller than this is control. */
+#define control_character_mask 0x1f	    /* 0x20 - 1 */
+#define meta_character_threshold 0x07f	    /* Larger than this is Meta. */
+#define control_character_bit 0x40	    /* 0x000000, must be off. */
+#define meta_character_bit 0x080	    /* x0000000, must be on. */
+#define largest_char 255		    /* Largest character value. */
+
+#define CTRL_CHAR(c) ((c) < control_character_threshold && (((c) & 0x80) == 0))
+#define META_CHAR(c) ((c) > meta_character_threshold && (c) <= largest_char)
+
+#define CTRL(c) ((c) & control_character_mask)
+#define META(c) ((c) | meta_character_bit)
+
+#define UNMETA(c) ((c) & (~meta_character_bit))
+#define UNCTRL(c) _rl_to_upper(((c)|control_character_bit))
+
+#if defined STDC_HEADERS || (!defined (isascii) && !defined (HAVE_ISASCII))
+#  define IN_CTYPE_DOMAIN(c) 1
+#else
+#  define IN_CTYPE_DOMAIN(c) isascii(c)
+#endif
+
+#if !defined (isxdigit) && !defined (HAVE_ISXDIGIT) && !defined (__cplusplus)
+#  define isxdigit(c)   (isdigit((unsigned char)(c)) || ((c) >= 'a' && (c) <= 'f') || ((c) >= 'A' && (c) <= 'F'))
+#endif
+
+#if defined (CTYPE_NON_ASCII)
+#  define NON_NEGATIVE(c) 1
+#else
+#  define NON_NEGATIVE(c) ((unsigned char)(c) == (c))
+#endif
+
+/* Some systems define these; we want our definitions. */
+#undef ISPRINT
+
+/* Beware:  these only work with single-byte ASCII characters. */
+
+#define ISALNUM(c)	(IN_CTYPE_DOMAIN (c) && isalnum ((unsigned char)c))
+#define ISALPHA(c)	(IN_CTYPE_DOMAIN (c) && isalpha ((unsigned char)c))
+#define ISDIGIT(c)	(IN_CTYPE_DOMAIN (c) && isdigit ((unsigned char)c))
+#define ISLOWER(c)	(IN_CTYPE_DOMAIN (c) && islower ((unsigned char)c))
+#define ISPRINT(c)	(IN_CTYPE_DOMAIN (c) && isprint ((unsigned char)c))
+#define ISUPPER(c)	(IN_CTYPE_DOMAIN (c) && isupper ((unsigned char)c))
+#define ISXDIGIT(c)	(IN_CTYPE_DOMAIN (c) && isxdigit ((unsigned char)c))
+
+#define _rl_lowercase_p(c)	(NON_NEGATIVE(c) && ISLOWER(c))
+#define _rl_uppercase_p(c)	(NON_NEGATIVE(c) && ISUPPER(c))
+#define _rl_digit_p(c)		((c) >= '0' && (c) <= '9')
+
+#define _rl_pure_alphabetic(c)	(NON_NEGATIVE(c) && ISALPHA(c))
+#define ALPHABETIC(c)		(NON_NEGATIVE(c) && ISALNUM(c))
+
+#ifndef _rl_to_upper
+#  define _rl_to_upper(c) (_rl_lowercase_p(c) ? toupper((unsigned char)c) : (c))
+#  define _rl_to_lower(c) (_rl_uppercase_p(c) ? tolower((unsigned char)c) : (c))
+#endif
+
+#ifndef _rl_digit_value
+#  define _rl_digit_value(x) ((x) - '0')
+#endif
+
+#ifndef _rl_isident
+#  define _rl_isident(c) (ISALNUM(c) || (c) == '_')
+#endif
+
+#ifndef ISOCTAL
+#  define ISOCTAL(c)	((c) >= '0' && (c) <= '7')
+#endif
+#define OCTVALUE(c)	((c) - '0')
+
+#define HEXVALUE(c) \
+  (((c) >= 'a' && (c) <= 'f') \
+  	? (c)-'a'+10 \
+  	: (c) >= 'A' && (c) <= 'F' ? (c)-'A'+10 : (c)-'0')
+
+#ifndef NEWLINE
+#define NEWLINE '\n'
+#endif
+
+#ifndef RETURN
+#define RETURN CTRL('M')
+#endif
+
+#ifndef RUBOUT
+#define RUBOUT 0x7f
+#endif
+
+#ifndef TAB
+#define TAB '\t'
+#endif
+
+#ifdef ABORT_CHAR
+#undef ABORT_CHAR
+#endif
+#define ABORT_CHAR CTRL('G')
+
+#ifdef PAGE
+#undef PAGE
+#endif
+#define PAGE CTRL('L')
+
+#ifdef SPACE
+#undef SPACE
+#endif
+#define SPACE ' '	/* XXX - was 0x20 */
+
+#ifdef ESC
+#undef ESC
+#endif
+#define ESC CTRL('[')
+
+#endif  /* _CHARDEFS_H_ */
diff --git a/lib/readline/colors.c b/lib/readline/colors.c
new file mode 100644
index 0000000..9e37527
--- /dev/null
+++ b/lib/readline/colors.c
@@ -0,0 +1,301 @@
+/* `dir', `vdir' and `ls' directory listing programs for GNU.
+
+   Modified by Chet Ramey for Readline.
+
+   Copyright (C) 1985, 1988, 1990-1991, 1995-2010, 2012, 2015, 2017, 2019
+   Free Software Foundation, Inc.
+
+   This program is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+/* Written by Richard Stallman and David MacKenzie.  */
+
+/* Color support by Peter Anvin <Peter.Anvin@linux.org> and Dennis
+   Flaherty <dennisf@denix.elk.miles.com> based on original patches by
+   Greg Lee <lee@uhunix.uhcc.hawaii.edu>.  */
+
+#define READLINE_LIBRARY
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include "rlconf.h"
+
+#if defined __TANDEM
+#  define _XOPEN_SOURCE_EXTENDED 1
+#  define _TANDEM_SOURCE 1
+#  include <sys/types.h>
+#  include <sys/stat.h>
+#endif
+
+#include <stdio.h>
+
+#include "posixstat.h" // stat related macros (S_ISREG, ...)
+#include <fcntl.h> // S_ISUID
+
+#ifndef S_ISDIR
+#  define	S_ISDIR(m)	(((m) & S_IFMT) == S_IFDIR)
+#endif
+
+// strlen()
+#if defined (HAVE_STRING_H)
+#  include <string.h>
+#else /* !HAVE_STRING_H */
+#  include <strings.h>
+#endif /* !HAVE_STRING_H */
+
+// abort()
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#include "readline.h"
+#include "rldefs.h"
+
+#ifdef COLOR_SUPPORT
+
+#include "xmalloc.h"
+#include "colors.h"
+
+static bool is_colored (enum indicator_no type);
+static void restore_default_color (void);
+
+COLOR_EXT_TYPE *_rl_color_ext_list = 0;
+
+/* Output a color indicator (which may contain nulls).  */
+void
+_rl_put_indicator (const struct bin_str *ind)
+{
+  fwrite (ind->string, ind->len, 1, rl_outstream);
+}
+
+static bool
+is_colored (enum indicator_no colored_filetype)
+{
+  size_t len = _rl_color_indicator[colored_filetype].len;
+  char const *s = _rl_color_indicator[colored_filetype].string;
+  return ! (len == 0
+            || (len == 1 && strncmp (s, "0", 1) == 0)
+            || (len == 2 && strncmp (s, "00", 2) == 0));
+}
+
+static void
+restore_default_color (void)
+{
+  _rl_put_indicator (&_rl_color_indicator[C_LEFT]);
+  _rl_put_indicator (&_rl_color_indicator[C_RIGHT]);
+}
+
+void
+_rl_set_normal_color (void)
+{
+  if (is_colored (C_NORM))
+    {
+      _rl_put_indicator (&_rl_color_indicator[C_LEFT]);
+      _rl_put_indicator (&_rl_color_indicator[C_NORM]);
+      _rl_put_indicator (&_rl_color_indicator[C_RIGHT]);
+    }
+}
+
+bool
+_rl_print_prefix_color (void)
+{
+  struct bin_str *s;
+
+  /* What do we want to use for the prefix? Let's try cyan first, see colors.h */
+  s = &_rl_color_indicator[C_PREFIX];
+  if (s->string != NULL)
+    {
+      if (is_colored (C_NORM))
+	restore_default_color ();
+      _rl_put_indicator (&_rl_color_indicator[C_LEFT]);
+      _rl_put_indicator (s);
+      _rl_put_indicator (&_rl_color_indicator[C_RIGHT]);
+      return 0;
+    }
+  else
+    return 1;
+}
+  
+/* Returns whether any color sequence was printed. */
+bool
+_rl_print_color_indicator (const char *f)
+{
+  enum indicator_no colored_filetype;
+  COLOR_EXT_TYPE *ext;	/* Color extension */
+  size_t len;		/* Length of name */
+
+  const char* name;
+  char *filename;
+  struct stat astat, linkstat;
+  mode_t mode;
+  int linkok;	/* 1 == ok, 0 == dangling symlink, -1 == missing */
+  int stat_ok;
+
+  name = f;
+
+  /* This should already have undergone tilde expansion */
+  filename = 0;
+  if (rl_filename_stat_hook)
+    {
+      filename = savestring (f);
+      (*rl_filename_stat_hook) (&filename);
+      name = filename;
+    }
+
+#if defined (HAVE_LSTAT)
+  stat_ok = lstat(name, &astat);
+#else
+  stat_ok = stat(name, &astat);
+#endif
+  if (stat_ok == 0)
+    {
+      mode = astat.st_mode;
+#if defined (HAVE_LSTAT)
+      if (S_ISLNK (mode))
+	{
+	  linkok = stat (name, &linkstat) == 0;
+	  if (linkok && strncmp (_rl_color_indicator[C_LINK].string, "target", 6) == 0)
+	    mode = linkstat.st_mode;
+	}
+      else
+#endif
+	linkok = 1;
+    }
+  else
+    linkok = -1;
+
+  /* Is this a nonexistent file?  If so, linkok == -1.  */
+
+  if (linkok == -1 && _rl_color_indicator[C_MISSING].string != NULL)
+    colored_filetype = C_MISSING;
+  else if (linkok == 0 && _rl_color_indicator[C_ORPHAN].string != NULL)
+    colored_filetype = C_ORPHAN;	/* dangling symlink */
+  else if(stat_ok != 0)
+    {
+      static enum indicator_no filetype_indicator[] = FILETYPE_INDICATORS;
+      colored_filetype = filetype_indicator[normal]; //f->filetype];
+    }
+  else
+    {
+      if (S_ISREG (mode))
+        {
+          colored_filetype = C_FILE;
+
+#if defined (S_ISUID)
+          if ((mode & S_ISUID) != 0 && is_colored (C_SETUID))
+            colored_filetype = C_SETUID;
+          else
+#endif
+#if defined (S_ISGID)
+          if ((mode & S_ISGID) != 0 && is_colored (C_SETGID))
+            colored_filetype = C_SETGID;
+          else
+#endif
+          if (is_colored (C_CAP) && 0) //f->has_capability)
+            colored_filetype = C_CAP;
+          else if ((mode & S_IXUGO) != 0 && is_colored (C_EXEC))
+            colored_filetype = C_EXEC;
+          else if ((1 < astat.st_nlink) && is_colored (C_MULTIHARDLINK))
+            colored_filetype = C_MULTIHARDLINK;
+        }
+      else if (S_ISDIR (mode))
+        {
+          colored_filetype = C_DIR;
+
+#if defined (S_ISVTX)
+          if ((mode & S_ISVTX) && (mode & S_IWOTH)
+              && is_colored (C_STICKY_OTHER_WRITABLE))
+            colored_filetype = C_STICKY_OTHER_WRITABLE;
+          else
+#endif
+          if ((mode & S_IWOTH) != 0 && is_colored (C_OTHER_WRITABLE))
+            colored_filetype = C_OTHER_WRITABLE;
+#if defined (S_ISVTX)
+          else if ((mode & S_ISVTX) != 0 && is_colored (C_STICKY))
+            colored_filetype = C_STICKY;
+#endif
+        }
+#if defined (S_ISLNK)
+      else if (S_ISLNK (mode))
+        colored_filetype = C_LINK;
+#endif
+      else if (S_ISFIFO (mode))
+        colored_filetype = C_FIFO;
+#if defined (S_ISSOCK)
+      else if (S_ISSOCK (mode))
+        colored_filetype = C_SOCK;
+#endif
+      else if (S_ISBLK (mode))
+        colored_filetype = C_BLK;
+      else if (S_ISCHR (mode))
+        colored_filetype = C_CHR;
+      else
+        {
+          /* Classify a file of some other type as C_ORPHAN.  */
+          colored_filetype = C_ORPHAN;
+        }
+    }
+
+  /* Check the file's suffix only if still classified as C_FILE.  */
+  ext = NULL;
+  if (colored_filetype == C_FILE)
+    {
+      /* Test if NAME has a recognized suffix.  */
+      len = strlen (name);
+      name += len;		/* Pointer to final \0.  */
+      for (ext = _rl_color_ext_list; ext != NULL; ext = ext->next)
+        {
+          if (ext->ext.len <= len
+              && strncmp (name - ext->ext.len, ext->ext.string,
+                          ext->ext.len) == 0)
+            break;
+        }
+    }
+
+  free (filename);	/* NULL or savestring return value */
+
+  {
+    const struct bin_str *const s
+      = ext ? &(ext->seq) : &_rl_color_indicator[colored_filetype];
+    if (s->string != NULL)
+      {
+        /* Need to reset so not dealing with attribute combinations */
+        if (is_colored (C_NORM))
+	  restore_default_color ();
+        _rl_put_indicator (&_rl_color_indicator[C_LEFT]);
+        _rl_put_indicator (s);
+        _rl_put_indicator (&_rl_color_indicator[C_RIGHT]);
+        return 0;
+      }
+    else
+      return 1;
+  }
+}
+
+void
+_rl_prep_non_filename_text (void)
+{
+  if (_rl_color_indicator[C_END].string != NULL)
+    _rl_put_indicator (&_rl_color_indicator[C_END]);
+  else
+    {
+      _rl_put_indicator (&_rl_color_indicator[C_LEFT]);
+      _rl_put_indicator (&_rl_color_indicator[C_RESET]);
+      _rl_put_indicator (&_rl_color_indicator[C_RIGHT]);
+    }
+}
+#endif /* COLOR_SUPPORT */
diff --git a/lib/readline/colors.h b/lib/readline/colors.h
new file mode 100644
index 0000000..6561ad9
--- /dev/null
+++ b/lib/readline/colors.h
@@ -0,0 +1,126 @@
+/* `dir', `vdir' and `ls' directory listing programs for GNU.
+
+   Modified by Chet Ramey for Readline.
+
+   Copyright (C) 1985, 1988, 1990-1991, 1995-2010, 2012, 2015
+   Free Software Foundation, Inc.
+
+   This program is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+/* Written by Richard Stallman and David MacKenzie.  */
+
+/* Color support by Peter Anvin <Peter.Anvin@linux.org> and Dennis
+   Flaherty <dennisf@denix.elk.miles.com> based on original patches by
+   Greg Lee <lee@uhunix.uhcc.hawaii.edu>.  */
+
+#ifndef _COLORS_H_
+#define _COLORS_H_
+
+#include <stdio.h> // size_t
+
+#if defined(__TANDEM) && defined(HAVE_STDBOOL_H) && (__STDC_VERSION__ < 199901L)
+typedef int _Bool;
+#endif
+
+#if defined (HAVE_STDBOOL_H)
+#  include <stdbool.h> // bool
+#else
+typedef int _rl_bool_t;
+
+#ifdef bool
+#  undef bool
+#endif
+#define bool _rl_bool_t
+
+#ifndef true
+#  define true 1
+#  define false 0
+#endif
+
+#endif /* !HAVE_STDBOOL_H */
+
+/* Null is a valid character in a color indicator (think about Epson
+   printers, for example) so we have to use a length/buffer string
+   type. */
+struct bin_str
+  {
+    size_t len;
+    const char *string;
+  };
+
+/* file type indicators (dir, sock, fifo, ...)
+   Default value is initialized in parse-colors.c.
+   It is then modified from the values of $LS_COLORS. */
+extern struct bin_str _rl_color_indicator[];
+
+/* The LS_COLORS variable is in a termcap-like format. */
+typedef struct _color_ext_type
+  {
+    struct bin_str ext;         	/* The extension we're looking for */
+    struct bin_str seq;         	/* The sequence to output when we do */
+    struct _color_ext_type *next;	/* Next in list */
+  } COLOR_EXT_TYPE;
+
+/* file extensions indicators (.txt, .log, .jpg, ...)
+   Values are taken from $LS_COLORS in rl_parse_colors(). */
+extern COLOR_EXT_TYPE *_rl_color_ext_list;
+
+#define FILETYPE_INDICATORS				\
+  {							\
+    C_ORPHAN, C_FIFO, C_CHR, C_DIR, C_BLK, C_FILE,	\
+    C_LINK, C_SOCK, C_FILE, C_DIR			\
+  }
+
+/* Whether we used any colors in the output so far.  If so, we will
+   need to restore the default color later.  If not, we will need to
+   call prep_non_filename_text before using color for the first time. */
+
+enum indicator_no
+  {
+    C_LEFT, C_RIGHT, C_END, C_RESET, C_NORM, C_FILE, C_DIR, C_LINK,
+    C_FIFO, C_SOCK,
+    C_BLK, C_CHR, C_MISSING, C_ORPHAN, C_EXEC, C_DOOR, C_SETUID, C_SETGID,
+    C_STICKY, C_OTHER_WRITABLE, C_STICKY_OTHER_WRITABLE, C_CAP, C_MULTIHARDLINK,
+    C_CLR_TO_EOL
+  };
+
+
+#if !S_IXUGO
+# define S_IXUGO (S_IXUSR | S_IXGRP | S_IXOTH)
+#endif
+
+enum filetype
+  {
+    unknown,
+    fifo,
+    chardev,
+    directory,
+    blockdev,
+    normal,
+    symbolic_link,
+    sock,
+    whiteout,
+    arg_directory
+  };
+
+/* Prefix color, currently same as socket */
+#define C_PREFIX	C_SOCK
+
+extern void _rl_put_indicator (const struct bin_str *ind);
+extern void _rl_set_normal_color (void);
+extern bool _rl_print_prefix_color (void);
+extern bool _rl_print_color_indicator (const char *f);
+extern void _rl_prep_non_filename_text (void);
+
+#endif /* !_COLORS_H_ */
diff --git a/lib/readline/compat.c b/lib/readline/compat.c
new file mode 100644
index 0000000..3ade362
--- /dev/null
+++ b/lib/readline/compat.c
@@ -0,0 +1,106 @@
+/* compat.c -- backwards compatibility functions. */
+
+/* Copyright (C) 2000-2017 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <stdio.h>
+
+#include "rlstdc.h"
+#include "rltypedefs.h"
+
+extern void rl_free_undo_list PARAMS((void));
+extern int rl_maybe_save_line PARAMS((void));
+extern int rl_maybe_unsave_line PARAMS((void));
+extern int rl_maybe_replace_line PARAMS((void));
+
+extern int rl_crlf PARAMS((void));
+extern int rl_ding PARAMS((void));
+extern int rl_alphabetic PARAMS((int));
+
+extern char **rl_completion_matches PARAMS((const char *, rl_compentry_func_t *));
+extern char *rl_username_completion_function PARAMS((const char *, int));
+extern char *rl_filename_completion_function PARAMS((const char *, int));
+
+/* Provide backwards-compatible entry points for old function names. */
+
+void
+free_undo_list (void)
+{
+  rl_free_undo_list ();
+}
+
+int
+maybe_replace_line (void)
+{
+  return rl_maybe_replace_line ();
+}
+
+int
+maybe_save_line (void)
+{
+  return rl_maybe_save_line ();
+}
+
+int
+maybe_unsave_line (void)
+{
+  return rl_maybe_unsave_line ();
+}
+
+int
+ding (void)
+{
+  return rl_ding ();
+}
+
+int
+crlf (void)
+{
+  return rl_crlf ();
+}
+
+int
+alphabetic (int c)
+{
+  return rl_alphabetic (c);
+}
+
+char **
+completion_matches (const char *s, rl_compentry_func_t *f)
+{
+  return rl_completion_matches (s, f);
+}
+
+char *
+username_completion_function (const char *s, int i)
+{
+  return rl_username_completion_function (s, i);
+}
+
+char *
+filename_completion_function (const char *s, int i)
+{
+  return rl_filename_completion_function (s, i);
+}
diff --git a/lib/readline/complete.c b/lib/readline/complete.c
new file mode 100644
index 0000000..fc5c3ad
--- /dev/null
+++ b/lib/readline/complete.c
@@ -0,0 +1,2990 @@
+/* complete.c -- filename completion for readline. */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#if defined (__TANDEM)
+#  define _XOPEN_SOURCE_EXTENDED 1
+#endif
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <sys/types.h>
+#if defined (__TANDEM)
+#  include <sys/stat.h>
+#endif
+#include <fcntl.h>
+#if defined (HAVE_SYS_FILE_H)
+#  include <sys/file.h>
+#endif
+
+#include <signal.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif /* HAVE_UNISTD_H */
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#include <stdio.h>
+
+#include <errno.h>
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+#if defined (HAVE_PWD_H)
+#include <pwd.h>
+#endif
+
+#include "posixdir.h"
+#include "posixstat.h"
+
+/* System-specific feature definitions and include files. */
+#include "rldefs.h"
+#include "rlmbutil.h"
+
+/* Some standard library routines. */
+#include "readline.h"
+#include "xmalloc.h"
+#include "rlprivate.h"
+
+#if defined (COLOR_SUPPORT)
+#  include "colors.h"
+#endif
+
+#ifdef __STDC__
+typedef int QSFUNC (const void *, const void *);
+#else
+typedef int QSFUNC ();
+#endif
+
+#ifdef HAVE_LSTAT
+#  define LSTAT lstat
+#else
+#  define LSTAT stat
+#endif
+
+/* Unix version of a hidden file.  Could be different on other systems. */
+#define HIDDEN_FILE(fname)	((fname)[0] == '.')
+
+/* Most systems don't declare getpwent in <pwd.h> if _POSIX_SOURCE is
+   defined. */
+#if defined (HAVE_GETPWENT) && (!defined (HAVE_GETPW_DECLS) || defined (_POSIX_SOURCE))
+extern struct passwd *getpwent PARAMS((void));
+#endif /* HAVE_GETPWENT && (!HAVE_GETPW_DECLS || _POSIX_SOURCE) */
+
+/* If non-zero, then this is the address of a function to call when
+   completing a word would normally display the list of possible matches.
+   This function is called instead of actually doing the display.
+   It takes three arguments: (char **matches, int num_matches, int max_length)
+   where MATCHES is the array of strings that matched, NUM_MATCHES is the
+   number of strings in that array, and MAX_LENGTH is the length of the
+   longest string in that array. */
+rl_compdisp_func_t *rl_completion_display_matches_hook = (rl_compdisp_func_t *)NULL;
+
+#if defined (VISIBLE_STATS) || defined (COLOR_SUPPORT)
+#  if !defined (X_OK)
+#    define X_OK 1
+#  endif
+#endif
+
+#if defined (VISIBLE_STATS)
+static int stat_char PARAMS((char *));
+#endif
+
+#if defined (COLOR_SUPPORT)
+static int colored_stat_start PARAMS((const char *));
+static void colored_stat_end PARAMS((void));
+static int colored_prefix_start PARAMS((void));
+static void colored_prefix_end PARAMS((void));
+#endif
+
+static int path_isdir PARAMS((const char *));
+
+static char *rl_quote_filename PARAMS((char *, int, char *));
+
+static void _rl_complete_sigcleanup PARAMS((int, void *));
+
+static void set_completion_defaults PARAMS((int));
+static int get_y_or_n PARAMS((int));
+static int _rl_internal_pager PARAMS((int));
+static char *printable_part PARAMS((char *));
+static int fnwidth PARAMS((const char *));
+static int fnprint PARAMS((const char *, int, const char *));
+static int print_filename PARAMS((char *, char *, int));
+
+static char **gen_completion_matches PARAMS((char *, int, int, rl_compentry_func_t *, int, int));
+
+static char **remove_duplicate_matches PARAMS((char **));
+static void insert_match PARAMS((char *, int, int, char *));
+static int append_to_match PARAMS((char *, int, int, int));
+static void insert_all_matches PARAMS((char **, int, char *));
+static int complete_fncmp PARAMS((const char *, int, const char *, int));
+static void display_matches PARAMS((char **));
+static int compute_lcd_of_matches PARAMS((char **, int, const char *));
+static int postprocess_matches PARAMS((char ***, int));
+static int compare_match PARAMS((char *, const char *));
+static int complete_get_screenwidth PARAMS((void));
+
+static char *make_quoted_replacement PARAMS((char *, int, char *));
+
+/* **************************************************************** */
+/*								    */
+/*	Completion matching, from readline's point of view.	    */
+/*								    */
+/* **************************************************************** */
+
+/* Variables known only to the readline library. */
+
+/* If non-zero, non-unique completions always show the list of matches. */
+int _rl_complete_show_all = 0;
+
+/* If non-zero, non-unique completions show the list of matches, unless it
+   is not possible to do partial completion and modify the line. */
+int _rl_complete_show_unmodified = 0;
+
+/* If non-zero, completed directory names have a slash appended. */
+int _rl_complete_mark_directories = 1;
+
+/* If non-zero, the symlinked directory completion behavior introduced in
+   readline-4.2a is disabled, and symlinks that point to directories have
+   a slash appended (subject to the value of _rl_complete_mark_directories).
+   This is user-settable via the mark-symlinked-directories variable. */
+int _rl_complete_mark_symlink_dirs = 0;
+
+/* If non-zero, completions are printed horizontally in alphabetical order,
+   like `ls -x'. */
+int _rl_print_completions_horizontally;
+
+/* Non-zero means that case is not significant in filename completion. */
+#if (defined (__MSDOS__) && !defined (__DJGPP__)) || (defined (_WIN32) && !defined (__CYGWIN__))
+int _rl_completion_case_fold = 1;
+#else
+int _rl_completion_case_fold = 0;
+#endif
+
+/* Non-zero means that `-' and `_' are equivalent when comparing filenames
+  for completion. */
+int _rl_completion_case_map = 0;
+
+/* If zero, don't match hidden files (filenames beginning with a `.' on
+   Unix) when doing filename completion. */
+int _rl_match_hidden_files = 1;
+
+/* Length in characters of a common prefix replaced with an ellipsis (`...')
+   when displaying completion matches.  Matches whose printable portion has
+   more than this number of displaying characters in common will have the common
+   display prefix replaced with an ellipsis. */
+int _rl_completion_prefix_display_length = 0;
+
+/* The readline-private number of screen columns to use when displaying
+   matches.  If < 0 or > _rl_screenwidth, it is ignored. */
+int _rl_completion_columns = -1;
+
+#if defined (COLOR_SUPPORT)
+/* Non-zero means to use colors to indicate file type when listing possible
+   completions.  The colors used are taken from $LS_COLORS, if set. */
+int _rl_colored_stats = 0;
+
+/* Non-zero means to use a color (currently magenta) to indicate the common
+   prefix of a set of possible word completions. */
+int _rl_colored_completion_prefix = 0;
+#endif
+
+/* If non-zero, when completing in the middle of a word, don't insert
+   characters from the match that match characters following point in
+   the word.  This means, for instance, completing when the cursor is
+   after the `e' in `Makefile' won't result in `Makefilefile'. */
+int _rl_skip_completed_text = 0;
+
+/* If non-zero, menu completion displays the common prefix first in the
+   cycle of possible completions instead of the last. */
+int _rl_menu_complete_prefix_first = 0;
+
+/* Global variables available to applications using readline. */
+
+#if defined (VISIBLE_STATS)
+/* Non-zero means add an additional character to each filename displayed
+   during listing completion iff rl_filename_completion_desired which helps
+   to indicate the type of file being listed. */
+int rl_visible_stats = 0;
+#endif /* VISIBLE_STATS */
+
+/* If non-zero, then this is the address of a function to call when
+   completing on a directory name.  The function is called with
+   the address of a string (the current directory name) as an arg. */
+rl_icppfunc_t *rl_directory_completion_hook = (rl_icppfunc_t *)NULL;
+
+rl_icppfunc_t *rl_directory_rewrite_hook = (rl_icppfunc_t *)NULL;
+
+rl_icppfunc_t *rl_filename_stat_hook = (rl_icppfunc_t *)NULL;
+
+/* If non-zero, this is the address of a function to call when reading
+   directory entries from the filesystem for completion and comparing
+   them to the partial word to be completed.  The function should
+   either return its first argument (if no conversion takes place) or
+   newly-allocated memory.  This can, for instance, convert filenames
+   between character sets for comparison against what's typed at the
+   keyboard.  The returned value is what is added to the list of
+   matches.  The second argument is the length of the filename to be
+   converted. */
+rl_dequote_func_t *rl_filename_rewrite_hook = (rl_dequote_func_t *)NULL;
+
+/* Non-zero means readline completion functions perform tilde expansion. */
+int rl_complete_with_tilde_expansion = 0;
+
+/* Pointer to the generator function for completion_matches ().
+   NULL means to use rl_filename_completion_function (), the default filename
+   completer. */
+rl_compentry_func_t *rl_completion_entry_function = (rl_compentry_func_t *)NULL;
+
+/* Pointer to generator function for rl_menu_complete ().  NULL means to use
+   *rl_completion_entry_function (see above). */
+rl_compentry_func_t *rl_menu_completion_entry_function = (rl_compentry_func_t *)NULL;
+
+/* Pointer to alternative function to create matches.
+   Function is called with TEXT, START, and END.
+   START and END are indices in RL_LINE_BUFFER saying what the boundaries
+   of TEXT are.
+   If this function exists and returns NULL then call the value of
+   rl_completion_entry_function to try to match, otherwise use the
+   array of strings returned. */
+rl_completion_func_t *rl_attempted_completion_function = (rl_completion_func_t *)NULL;
+
+/* Non-zero means to suppress normal filename completion after the
+   user-specified completion function has been called. */
+int rl_attempted_completion_over = 0;
+
+/* Set to a character indicating the type of completion being performed
+   by rl_complete_internal, available for use by application completion
+   functions. */
+int rl_completion_type = 0;
+
+/* Up to this many items will be displayed in response to a
+   possible-completions call.  After that, we ask the user if
+   she is sure she wants to see them all.  A negative value means
+   don't ask. */
+int rl_completion_query_items = 100;
+
+int _rl_page_completions = 1;
+
+/* The basic list of characters that signal a break between words for the
+   completer routine.  The contents of this variable is what breaks words
+   in the shell, i.e. " \t\n\"\\'`@$><=" */
+const char *rl_basic_word_break_characters = " \t\n\"\\'`@$><=;|&{("; /* }) */
+
+/* List of basic quoting characters. */
+const char *rl_basic_quote_characters = "\"'";
+
+/* The list of characters that signal a break between words for
+   rl_complete_internal.  The default list is the contents of
+   rl_basic_word_break_characters.  */
+/*const*/ char *rl_completer_word_break_characters = (/*const*/ char *)NULL;
+
+/* Hook function to allow an application to set the completion word
+   break characters before readline breaks up the line.  Allows
+   position-dependent word break characters. */
+rl_cpvfunc_t *rl_completion_word_break_hook = (rl_cpvfunc_t *)NULL;
+
+/* List of characters which can be used to quote a substring of the line.
+   Completion occurs on the entire substring, and within the substring
+   rl_completer_word_break_characters are treated as any other character,
+   unless they also appear within this list. */
+const char *rl_completer_quote_characters = (const char *)NULL;
+
+/* List of characters that should be quoted in filenames by the completer. */
+const char *rl_filename_quote_characters = (const char *)NULL;
+
+/* List of characters that are word break characters, but should be left
+   in TEXT when it is passed to the completion function.  The shell uses
+   this to help determine what kind of completing to do. */
+const char *rl_special_prefixes = (const char *)NULL;
+
+/* If non-zero, then disallow duplicates in the matches. */
+int rl_ignore_completion_duplicates = 1;
+
+/* Non-zero means that the results of the matches are to be treated
+   as filenames.  This is ALWAYS zero on entry, and can only be changed
+   within a completion entry finder function. */
+int rl_filename_completion_desired = 0;
+
+/* Non-zero means that the results of the matches are to be quoted using
+   double quotes (or an application-specific quoting mechanism) if the
+   filename contains any characters in rl_filename_quote_chars.  This is
+   ALWAYS non-zero on entry, and can only be changed within a completion
+   entry finder function. */
+int rl_filename_quoting_desired = 1;
+
+/* This function, if defined, is called by the completer when real
+   filename completion is done, after all the matching names have been
+   generated. It is passed a (char**) known as matches in the code below.
+   It consists of a NULL-terminated array of pointers to potential
+   matching strings.  The 1st element (matches[0]) is the maximal
+   substring that is common to all matches. This function can re-arrange
+   the list of matches as required, but all elements of the array must be
+   free()'d if they are deleted. The main intent of this function is
+   to implement FIGNORE a la SunOS csh. */
+rl_compignore_func_t *rl_ignore_some_completions_function = (rl_compignore_func_t *)NULL;
+
+/* Set to a function to quote a filename in an application-specific fashion.
+   Called with the text to quote, the type of match found (single or multiple)
+   and a pointer to the quoting character to be used, which the function can
+   reset if desired. */
+rl_quote_func_t *rl_filename_quoting_function = rl_quote_filename;
+         
+/* Function to call to remove quoting characters from a filename.  Called
+   before completion is attempted, so the embedded quotes do not interfere
+   with matching names in the file system.  Readline doesn't do anything
+   with this; it's set only by applications. */
+rl_dequote_func_t *rl_filename_dequoting_function = (rl_dequote_func_t *)NULL;
+
+/* Function to call to decide whether or not a word break character is
+   quoted.  If a character is quoted, it does not break words for the
+   completer. */
+rl_linebuf_func_t *rl_char_is_quoted_p = (rl_linebuf_func_t *)NULL;
+
+/* If non-zero, the completion functions don't append anything except a
+   possible closing quote.  This is set to 0 by rl_complete_internal and
+   may be changed by an application-specific completion function. */
+int rl_completion_suppress_append = 0;
+
+/* Character appended to completed words when at the end of the line.  The
+   default is a space. */
+int rl_completion_append_character = ' ';
+
+/* If non-zero, the completion functions don't append any closing quote.
+   This is set to 0 by rl_complete_internal and may be changed by an
+   application-specific completion function. */
+int rl_completion_suppress_quote = 0;
+
+/* Set to any quote character readline thinks it finds before any application
+   completion function is called. */
+int rl_completion_quote_character;
+
+/* Set to a non-zero value if readline found quoting anywhere in the word to
+   be completed; set before any application completion function is called. */
+int rl_completion_found_quote;
+
+/* If non-zero, a slash will be appended to completed filenames that are
+   symbolic links to directory names, subject to the value of the
+   mark-directories variable (which is user-settable).  This exists so
+   that application completion functions can override the user's preference
+   (set via the mark-symlinked-directories variable) if appropriate.
+   It's set to the value of _rl_complete_mark_symlink_dirs in
+   rl_complete_internal before any application-specific completion
+   function is called, so without that function doing anything, the user's
+   preferences are honored. */
+int rl_completion_mark_symlink_dirs;
+
+/* If non-zero, inhibit completion (temporarily). */
+int rl_inhibit_completion;
+
+/* Set to the last key used to invoke one of the completion functions */
+int rl_completion_invoking_key;
+
+/* If non-zero, sort the completion matches.  On by default. */
+int rl_sort_completion_matches = 1;
+
+/* Variables local to this file. */
+
+/* Local variable states what happened during the last completion attempt. */
+static int completion_changed_buffer;
+static int last_completion_failed = 0;
+
+/* The result of the query to the user about displaying completion matches */
+static int completion_y_or_n;
+
+static int _rl_complete_display_matches_interrupt = 0;
+
+/*************************************/
+/*				     */
+/*    Bindable completion functions  */
+/*				     */
+/*************************************/
+
+/* Complete the word at or before point.  You have supplied the function
+   that does the initial simple matching selection algorithm (see
+   rl_completion_matches ()).  The default is to do filename completion. */
+int
+rl_complete (int ignore, int invoking_key)
+{
+  rl_completion_invoking_key = invoking_key;
+
+  if (rl_inhibit_completion)
+    return (_rl_insert_char (ignore, invoking_key));
+#if 0
+  else if (rl_last_func == rl_complete && completion_changed_buffer == 0 && last_completion_failed == 0)
+#else
+  else if (rl_last_func == rl_complete && completion_changed_buffer == 0)
+#endif
+    return (rl_complete_internal ('?'));
+  else if (_rl_complete_show_all)
+    return (rl_complete_internal ('!'));
+  else if (_rl_complete_show_unmodified)
+    return (rl_complete_internal ('@'));
+  else
+    return (rl_complete_internal (TAB));
+}
+
+/* List the possible completions.  See description of rl_complete (). */
+int
+rl_possible_completions (int ignore, int invoking_key)
+{
+  rl_completion_invoking_key = invoking_key;
+  return (rl_complete_internal ('?'));
+}
+
+int
+rl_insert_completions (int ignore, int invoking_key)
+{
+  rl_completion_invoking_key = invoking_key;
+  return (rl_complete_internal ('*'));
+}
+
+/* Return the correct value to pass to rl_complete_internal performing
+   the same tests as rl_complete.  This allows consecutive calls to an
+   application's completion function to list possible completions and for
+   an application-specific completion function to honor the
+   show-all-if-ambiguous readline variable. */
+int
+rl_completion_mode (rl_command_func_t *cfunc)
+{
+  if (rl_last_func == cfunc && !completion_changed_buffer)
+    return '?';
+  else if (_rl_complete_show_all)
+    return '!';
+  else if (_rl_complete_show_unmodified)
+    return '@';
+  else
+    return TAB;
+}
+
+/************************************/
+/*				    */
+/*    Completion utility functions  */
+/*				    */
+/************************************/
+
+/* Reset public readline state on a signal or other event. */
+void
+_rl_reset_completion_state (void)
+{
+  rl_completion_found_quote = 0;
+  rl_completion_quote_character = 0;
+}
+
+static void
+_rl_complete_sigcleanup (int sig, void *ptr)
+{
+  if (sig == SIGINT)	/* XXX - for now */
+    {
+      _rl_free_match_list ((char **)ptr);
+      _rl_complete_display_matches_interrupt = 1;
+    }
+}
+
+/* Set default values for readline word completion.  These are the variables
+   that application completion functions can change or inspect. */
+static void
+set_completion_defaults (int what_to_do)
+{
+  /* Only the completion entry function can change these. */
+  rl_filename_completion_desired = 0;
+  rl_filename_quoting_desired = 1;
+  rl_completion_type = what_to_do;
+  rl_completion_suppress_append = rl_completion_suppress_quote = 0;
+  rl_completion_append_character = ' ';
+
+  /* The completion entry function may optionally change this. */
+  rl_completion_mark_symlink_dirs = _rl_complete_mark_symlink_dirs;
+
+  /* Reset private state. */
+  _rl_complete_display_matches_interrupt = 0;
+}
+
+/* The user must press "y" or "n". Non-zero return means "y" pressed. */
+static int
+get_y_or_n (int for_pager)
+{
+  int c;
+
+  /* For now, disable pager in callback mode, until we later convert to state
+     driven functions.  Have to wait until next major version to add new
+     state definition, since it will change value of RL_STATE_DONE. */
+#if defined (READLINE_CALLBACKS)
+  if (RL_ISSTATE (RL_STATE_CALLBACK))
+    return 1;
+#endif
+
+  for (;;)
+    {
+      RL_SETSTATE(RL_STATE_MOREINPUT);
+      c = rl_read_key ();
+      RL_UNSETSTATE(RL_STATE_MOREINPUT);
+
+      if (c == 'y' || c == 'Y' || c == ' ')
+	return (1);
+      if (c == 'n' || c == 'N' || c == RUBOUT)
+	return (0);
+      if (c == ABORT_CHAR || c < 0)
+	_rl_abort_internal ();
+      if (for_pager && (c == NEWLINE || c == RETURN))
+	return (2);
+      if (for_pager && (c == 'q' || c == 'Q'))
+	return (0);
+      rl_ding ();
+    }
+}
+
+static int
+_rl_internal_pager (int lines)
+{
+  int i;
+
+  fprintf (rl_outstream, "--More--");
+  fflush (rl_outstream);
+  i = get_y_or_n (1);
+  _rl_erase_entire_line ();
+  if (i == 0)
+    return -1;
+  else if (i == 2)
+    return (lines - 1);
+  else
+    return 0;
+}
+
+static int
+path_isdir (const char *filename)
+{
+  struct stat finfo;
+
+  return (stat (filename, &finfo) == 0 && S_ISDIR (finfo.st_mode));
+}
+
+#if defined (VISIBLE_STATS)
+/* Return the character which best describes FILENAME.
+     `@' for symbolic links
+     `/' for directories
+     `*' for executables
+     `=' for sockets
+     `|' for FIFOs
+     `%' for character special devices
+     `#' for block special devices */
+static int
+stat_char (char *filename)
+{
+  struct stat finfo;
+  int character, r;
+  char *f;
+  const char *fn;
+
+  /* Short-circuit a //server on cygwin, since that will always behave as
+     a directory. */
+#if __CYGWIN__
+  if (filename[0] == '/' && filename[1] == '/' && strchr (filename+2, '/') == 0)
+    return '/';
+#endif
+
+  f = 0;
+  if (rl_filename_stat_hook)
+    {
+      f = savestring (filename);
+      (*rl_filename_stat_hook) (&f);
+      fn = f;
+    }
+  else
+    fn = filename;
+    
+#if defined (HAVE_LSTAT) && defined (S_ISLNK)
+  r = lstat (fn, &finfo);
+#else
+  r = stat (fn, &finfo);
+#endif
+
+  if (r == -1)
+    {
+      xfree (f);
+      return (0);
+    }
+
+  character = 0;
+  if (S_ISDIR (finfo.st_mode))
+    character = '/';
+#if defined (S_ISCHR)
+  else if (S_ISCHR (finfo.st_mode))
+    character = '%';
+#endif /* S_ISCHR */
+#if defined (S_ISBLK)
+  else if (S_ISBLK (finfo.st_mode))
+    character = '#';
+#endif /* S_ISBLK */
+#if defined (S_ISLNK)
+  else if (S_ISLNK (finfo.st_mode))
+    character = '@';
+#endif /* S_ISLNK */
+#if defined (S_ISSOCK)
+  else if (S_ISSOCK (finfo.st_mode))
+    character = '=';
+#endif /* S_ISSOCK */
+#if defined (S_ISFIFO)
+  else if (S_ISFIFO (finfo.st_mode))
+    character = '|';
+#endif
+  else if (S_ISREG (finfo.st_mode))
+    {
+#if defined (_WIN32) && !defined (__CYGWIN__)
+      char *ext;
+
+      /* Windows doesn't do access and X_OK; check file extension instead */
+      ext = strrchr (fn, '.');
+      if (ext && (_rl_stricmp (ext, ".exe") == 0 ||
+		  _rl_stricmp (ext, ".cmd") == 0 ||
+		  _rl_stricmp (ext, ".bat") == 0 ||
+		  _rl_stricmp (ext, ".com") == 0))
+	character = '*';
+#else
+      if (access (filename, X_OK) == 0)
+	character = '*';
+#endif
+    }
+
+  xfree (f);
+  return (character);
+}
+#endif /* VISIBLE_STATS */
+
+#if defined (COLOR_SUPPORT)
+static int
+colored_stat_start (const char *filename)
+{
+  _rl_set_normal_color ();
+  return (_rl_print_color_indicator (filename));
+}
+
+static void
+colored_stat_end (void)
+{
+  _rl_prep_non_filename_text ();
+  _rl_put_indicator (&_rl_color_indicator[C_CLR_TO_EOL]);
+}
+
+static int
+colored_prefix_start (void)
+{
+  _rl_set_normal_color ();
+  return (_rl_print_prefix_color ());
+}
+
+static void
+colored_prefix_end (void)
+{
+  colored_stat_end ();		/* for now */
+}
+#endif
+
+/* Return the portion of PATHNAME that should be output when listing
+   possible completions.  If we are hacking filename completion, we
+   are only interested in the basename, the portion following the
+   final slash.  Otherwise, we return what we were passed.  Since
+   printing empty strings is not very informative, if we're doing
+   filename completion, and the basename is the empty string, we look
+   for the previous slash and return the portion following that.  If
+   there's no previous slash, we just return what we were passed. */
+static char *
+printable_part (char *pathname)
+{
+  char *temp, *x;
+
+  if (rl_filename_completion_desired == 0)	/* don't need to do anything */
+    return (pathname);
+
+  temp = strrchr (pathname, '/');
+#if defined (__MSDOS__) || defined (_WIN32)
+  if (temp == 0 && ISALPHA ((unsigned char)pathname[0]) && pathname[1] == ':')
+    temp = pathname + 1;
+#endif
+
+  if (temp == 0 || *temp == '\0')
+    return (pathname);
+  else if (temp[1] == 0 && temp == pathname)
+    return (pathname);
+  /* If the basename is NULL, we might have a pathname like '/usr/src/'.
+     Look for a previous slash and, if one is found, return the portion
+     following that slash.  If there's no previous slash, just return the
+     pathname we were passed. */
+  else if (temp[1] == '\0')
+    {
+      for (x = temp - 1; x > pathname; x--)
+        if (*x == '/')
+          break;
+      return ((*x == '/') ? x + 1 : pathname);
+    }
+  else
+    return ++temp;
+}
+
+/* Compute width of STRING when displayed on screen by print_filename */
+static int
+fnwidth (const char *string)
+{
+  int width, pos;
+#if defined (HANDLE_MULTIBYTE)
+  mbstate_t ps;
+  int left, w;
+  size_t clen;
+  wchar_t wc;
+
+  left = strlen (string) + 1;
+  memset (&ps, 0, sizeof (mbstate_t));
+#endif
+
+  width = pos = 0;
+  while (string[pos])
+    {
+      if (CTRL_CHAR (string[pos]) || string[pos] == RUBOUT)
+	{
+	  width += 2;
+	  pos++;
+	}
+      else
+	{
+#if defined (HANDLE_MULTIBYTE)
+	  clen = mbrtowc (&wc, string + pos, left - pos, &ps);
+	  if (MB_INVALIDCH (clen))
+	    {
+	      width++;
+	      pos++;
+	      memset (&ps, 0, sizeof (mbstate_t));
+	    }
+	  else if (MB_NULLWCH (clen))
+	    break;
+	  else
+	    {
+	      pos += clen;
+	      w = WCWIDTH (wc);
+	      width += (w >= 0) ? w : 1;
+	    }
+#else
+	  width++;
+	  pos++;
+#endif
+	}
+    }
+
+  return width;
+}
+
+#define ELLIPSIS_LEN	3
+
+static int
+fnprint (const char *to_print, int prefix_bytes, const char *real_pathname)
+{
+  int printed_len, w;
+  const char *s;
+  int common_prefix_len, print_len;
+#if defined (HANDLE_MULTIBYTE)
+  mbstate_t ps;
+  const char *end;
+  size_t tlen;
+  int width;
+  wchar_t wc;
+
+  print_len = strlen (to_print);
+  end = to_print + print_len + 1;
+  memset (&ps, 0, sizeof (mbstate_t));
+#else
+  print_len = strlen (to_print);
+#endif
+
+  printed_len = common_prefix_len = 0;
+
+  /* Don't print only the ellipsis if the common prefix is one of the
+     possible completions.  Only cut off prefix_bytes if we're going to be
+     printing the ellipsis, which takes precedence over coloring the
+     completion prefix (see print_filename() below). */
+  if (_rl_completion_prefix_display_length > 0 && prefix_bytes >= print_len)
+    prefix_bytes = 0;
+
+#if defined (COLOR_SUPPORT)
+  if (_rl_colored_stats && (prefix_bytes == 0 || _rl_colored_completion_prefix <= 0))
+    colored_stat_start (real_pathname);
+#endif
+
+  if (prefix_bytes && _rl_completion_prefix_display_length > 0)
+    {
+      char ellipsis;
+
+      ellipsis = (to_print[prefix_bytes] == '.') ? '_' : '.';
+      for (w = 0; w < ELLIPSIS_LEN; w++)
+	putc (ellipsis, rl_outstream);
+      printed_len = ELLIPSIS_LEN;
+    }
+#if defined (COLOR_SUPPORT)
+  else if (prefix_bytes && _rl_colored_completion_prefix > 0)
+    {
+      common_prefix_len = prefix_bytes;
+      prefix_bytes = 0;
+      /* XXX - print color indicator start here */
+      colored_prefix_start ();
+    }
+#endif
+
+  s = to_print + prefix_bytes;
+  while (*s)
+    {
+      if (CTRL_CHAR (*s))
+        {
+          putc ('^', rl_outstream);
+          putc (UNCTRL (*s), rl_outstream);
+          printed_len += 2;
+          s++;
+#if defined (HANDLE_MULTIBYTE)
+	  memset (&ps, 0, sizeof (mbstate_t));
+#endif
+        }
+      else if (*s == RUBOUT)
+	{
+	  putc ('^', rl_outstream);
+	  putc ('?', rl_outstream);
+	  printed_len += 2;
+	  s++;
+#if defined (HANDLE_MULTIBYTE)
+	  memset (&ps, 0, sizeof (mbstate_t));
+#endif
+	}
+      else
+	{
+#if defined (HANDLE_MULTIBYTE)
+	  tlen = mbrtowc (&wc, s, end - s, &ps);
+	  if (MB_INVALIDCH (tlen))
+	    {
+	      tlen = 1;
+	      width = 1;
+	      memset (&ps, 0, sizeof (mbstate_t));
+	    }
+	  else if (MB_NULLWCH (tlen))
+	    break;
+	  else
+	    {
+	      w = WCWIDTH (wc);
+	      width = (w >= 0) ? w : 1;
+	    }
+	  fwrite (s, 1, tlen, rl_outstream);
+	  s += tlen;
+	  printed_len += width;
+#else
+	  putc (*s, rl_outstream);
+	  s++;
+	  printed_len++;
+#endif
+	}
+      if (common_prefix_len > 0 && (s - to_print) >= common_prefix_len)
+	{
+#if defined (COLOR_SUPPORT)
+	  /* printed bytes = s - to_print */
+	  /* printed bytes should never be > but check for paranoia's sake */
+	  colored_prefix_end ();
+	  if (_rl_colored_stats)
+	    colored_stat_start (real_pathname);		/* XXX - experiment */
+#endif
+	  common_prefix_len = 0;
+	}
+    }
+
+#if defined (COLOR_SUPPORT)
+  /* XXX - unconditional for now */
+  if (_rl_colored_stats)
+    colored_stat_end ();
+#endif
+
+  return printed_len;
+}
+
+/* Output TO_PRINT to rl_outstream.  If VISIBLE_STATS is defined and we
+   are using it, check for and output a single character for `special'
+   filenames.  Return the number of characters we output. */
+
+static int
+print_filename (char *to_print, char *full_pathname, int prefix_bytes)
+{
+  int printed_len, extension_char, slen, tlen;
+  char *s, c, *new_full_pathname, *dn;
+
+  extension_char = 0;
+#if defined (COLOR_SUPPORT)
+  /* Defer printing if we want to prefix with a color indicator */
+  if (_rl_colored_stats == 0 || rl_filename_completion_desired == 0)
+#endif
+    printed_len = fnprint (to_print, prefix_bytes, to_print);
+
+  if (rl_filename_completion_desired && (
+#if defined (VISIBLE_STATS)
+     rl_visible_stats ||
+#endif
+#if defined (COLOR_SUPPORT)
+     _rl_colored_stats ||
+#endif
+     _rl_complete_mark_directories))
+    {
+      /* If to_print != full_pathname, to_print is the basename of the
+	 path passed.  In this case, we try to expand the directory
+	 name before checking for the stat character. */
+      if (to_print != full_pathname)
+	{
+	  /* Terminate the directory name. */
+	  c = to_print[-1];
+	  to_print[-1] = '\0';
+
+	  /* If setting the last slash in full_pathname to a NUL results in
+	     full_pathname being the empty string, we are trying to complete
+	     files in the root directory.  If we pass a null string to the
+	     bash directory completion hook, for example, it will expand it
+	     to the current directory.  We just want the `/'. */
+	  if (full_pathname == 0 || *full_pathname == 0)
+	    dn = "/";
+	  else if (full_pathname[0] != '/')
+	    dn = full_pathname;
+	  else if (full_pathname[1] == 0)
+	    dn = "//";		/* restore trailing slash to `//' */
+	  else if (full_pathname[1] == '/' && full_pathname[2] == 0)
+	    dn = "/";		/* don't turn /// into // */
+	  else
+	    dn = full_pathname;
+	  s = tilde_expand (dn);
+	  if (rl_directory_completion_hook)
+	    (*rl_directory_completion_hook) (&s);
+
+	  slen = strlen (s);
+	  tlen = strlen (to_print);
+	  new_full_pathname = (char *)xmalloc (slen + tlen + 2);
+	  strcpy (new_full_pathname, s);
+	  if (s[slen - 1] == '/')
+	    slen--;
+	  else
+	    new_full_pathname[slen] = '/';
+	  strcpy (new_full_pathname + slen + 1, to_print);
+
+#if defined (VISIBLE_STATS)
+	  if (rl_visible_stats)
+	    extension_char = stat_char (new_full_pathname);
+	  else
+#endif
+	  if (_rl_complete_mark_directories)
+	    {
+	      dn = 0;
+	      if (rl_directory_completion_hook == 0 && rl_filename_stat_hook)
+		{
+		  dn = savestring (new_full_pathname);
+		  (*rl_filename_stat_hook) (&dn);
+		  xfree (new_full_pathname);
+		  new_full_pathname = dn;
+		}
+	      if (path_isdir (new_full_pathname))
+		extension_char = '/';
+	    }
+
+	  /* Move colored-stats code inside fnprint() */
+#if defined (COLOR_SUPPORT)
+	  if (_rl_colored_stats)
+	    printed_len = fnprint (to_print, prefix_bytes, new_full_pathname);
+#endif
+
+	  xfree (new_full_pathname);
+	  to_print[-1] = c;
+	}
+      else
+	{
+	  s = tilde_expand (full_pathname);
+#if defined (VISIBLE_STATS)
+	  if (rl_visible_stats)
+	    extension_char = stat_char (s);
+	  else
+#endif
+	    if (_rl_complete_mark_directories && path_isdir (s))
+	      extension_char = '/';
+
+	  /* Move colored-stats code inside fnprint() */
+#if defined (COLOR_SUPPORT)
+	  if (_rl_colored_stats)
+	    printed_len = fnprint (to_print, prefix_bytes, s);
+#endif
+	}
+
+      xfree (s);
+      if (extension_char)
+	{
+	  putc (extension_char, rl_outstream);
+	  printed_len++;
+	}
+    }
+
+  return printed_len;
+}
+
+static char *
+rl_quote_filename (char *s, int rtype, char *qcp)
+{
+  char *r;
+
+  r = (char *)xmalloc (strlen (s) + 2);
+  *r = *rl_completer_quote_characters;
+  strcpy (r + 1, s);
+  if (qcp)
+    *qcp = *rl_completer_quote_characters;
+  return r;
+}
+
+/* Find the bounds of the current word for completion purposes, and leave
+   rl_point set to the end of the word.  This function skips quoted
+   substrings (characters between matched pairs of characters in
+   rl_completer_quote_characters).  First we try to find an unclosed
+   quoted substring on which to do matching.  If one is not found, we use
+   the word break characters to find the boundaries of the current word.
+   We call an application-specific function to decide whether or not a
+   particular word break character is quoted; if that function returns a
+   non-zero result, the character does not break a word.  This function
+   returns the opening quote character if we found an unclosed quoted
+   substring, '\0' otherwise.  FP, if non-null, is set to a value saying
+   which (shell-like) quote characters we found (single quote, double
+   quote, or backslash) anywhere in the string.  DP, if non-null, is set to
+   the value of the delimiter character that caused a word break. */
+
+char
+_rl_find_completion_word (int *fp, int *dp)
+{
+  int scan, end, found_quote, delimiter, pass_next, isbrk;
+  char quote_char, *brkchars;
+
+  end = rl_point;
+  found_quote = delimiter = 0;
+  quote_char = '\0';
+
+  brkchars = 0;
+  if (rl_completion_word_break_hook)
+    brkchars = (*rl_completion_word_break_hook) ();
+  if (brkchars == 0)
+    brkchars = rl_completer_word_break_characters;
+
+  if (rl_completer_quote_characters)
+    {
+      /* We have a list of characters which can be used in pairs to
+	 quote substrings for the completer.  Try to find the start
+	 of an unclosed quoted substring. */
+      /* FOUND_QUOTE is set so we know what kind of quotes we found. */
+      for (scan = pass_next = 0; scan < end; scan = MB_NEXTCHAR (rl_line_buffer, scan, 1, MB_FIND_ANY))
+	{
+	  if (pass_next)
+	    {
+	      pass_next = 0;
+	      continue;
+	    }
+
+	  /* Shell-like semantics for single quotes -- don't allow backslash
+	     to quote anything in single quotes, especially not the closing
+	     quote.  If you don't like this, take out the check on the value
+	     of quote_char. */
+	  if (quote_char != '\'' && rl_line_buffer[scan] == '\\')
+	    {
+	      pass_next = 1;
+	      found_quote |= RL_QF_BACKSLASH;
+	      continue;
+	    }
+
+	  if (quote_char != '\0')
+	    {
+	      /* Ignore everything until the matching close quote char. */
+	      if (rl_line_buffer[scan] == quote_char)
+		{
+		  /* Found matching close.  Abandon this substring. */
+		  quote_char = '\0';
+		  rl_point = end;
+		}
+	    }
+	  else if (strchr (rl_completer_quote_characters, rl_line_buffer[scan]))
+	    {
+	      /* Found start of a quoted substring. */
+	      quote_char = rl_line_buffer[scan];
+	      rl_point = scan + 1;
+	      /* Shell-like quoting conventions. */
+	      if (quote_char == '\'')
+		found_quote |= RL_QF_SINGLE_QUOTE;
+	      else if (quote_char == '"')
+		found_quote |= RL_QF_DOUBLE_QUOTE;
+	      else
+		found_quote |= RL_QF_OTHER_QUOTE;      
+	    }
+	}
+    }
+
+  if (rl_point == end && quote_char == '\0')
+    {
+      /* We didn't find an unclosed quoted substring upon which to do
+         completion, so use the word break characters to find the
+         substring on which to complete. */
+      while (rl_point = MB_PREVCHAR (rl_line_buffer, rl_point, MB_FIND_ANY))
+	{
+	  scan = rl_line_buffer[rl_point];
+
+	  if (strchr (brkchars, scan) == 0)
+	    continue;
+
+	  /* Call the application-specific function to tell us whether
+	     this word break character is quoted and should be skipped. */
+	  if (rl_char_is_quoted_p && found_quote &&
+	      (*rl_char_is_quoted_p) (rl_line_buffer, rl_point))
+	    continue;
+
+	  /* Convoluted code, but it avoids an n^2 algorithm with calls
+	     to char_is_quoted. */
+	  break;
+	}
+    }
+
+  /* If we are at an unquoted word break, then advance past it. */
+  scan = rl_line_buffer[rl_point];
+
+  /* If there is an application-specific function to say whether or not
+     a character is quoted and we found a quote character, let that
+     function decide whether or not a character is a word break, even
+     if it is found in rl_completer_word_break_characters.  Don't bother
+     if we're at the end of the line, though. */
+  if (scan)
+    {
+      if (rl_char_is_quoted_p)
+	isbrk = (found_quote == 0 ||
+		(*rl_char_is_quoted_p) (rl_line_buffer, rl_point) == 0) &&
+		strchr (brkchars, scan) != 0;
+      else
+	isbrk = strchr (brkchars, scan) != 0;
+
+      if (isbrk)
+	{
+	  /* If the character that caused the word break was a quoting
+	     character, then remember it as the delimiter. */
+	  if (rl_basic_quote_characters &&
+	      strchr (rl_basic_quote_characters, scan) &&
+	      (end - rl_point) > 1)
+	    delimiter = scan;
+
+	  /* If the character isn't needed to determine something special
+	     about what kind of completion to perform, then advance past it. */
+	  if (rl_special_prefixes == 0 || strchr (rl_special_prefixes, scan) == 0)
+	    rl_point++;
+	}
+    }
+
+  if (fp)
+    *fp = found_quote;
+  if (dp)
+    *dp = delimiter;
+
+  return (quote_char);
+}
+
+static char **
+gen_completion_matches (char *text, int start, int end, rl_compentry_func_t *our_func, int found_quote, int quote_char)
+{
+  char **matches;
+
+  rl_completion_found_quote = found_quote;
+  rl_completion_quote_character = quote_char;
+
+  /* If the user wants to TRY to complete, but then wants to give
+     up and use the default completion function, they set the
+     variable rl_attempted_completion_function. */
+  if (rl_attempted_completion_function)
+    {
+      matches = (*rl_attempted_completion_function) (text, start, end);
+      if (RL_SIG_RECEIVED())
+	{
+	  _rl_free_match_list (matches);
+	  matches = 0;
+	  RL_CHECK_SIGNALS ();
+	}
+
+      if (matches || rl_attempted_completion_over)
+	{
+	  rl_attempted_completion_over = 0;
+	  return (matches);
+	}
+    }
+
+  /* XXX -- filename dequoting moved into rl_filename_completion_function */
+
+  /* rl_completion_matches will check for signals as well to avoid a long
+     delay while reading a directory. */
+  matches = rl_completion_matches (text, our_func);
+  if (RL_SIG_RECEIVED())
+    {
+      _rl_free_match_list (matches);
+      matches = 0;
+      RL_CHECK_SIGNALS ();
+    }
+  return matches;  
+}
+
+/* Filter out duplicates in MATCHES.  This frees up the strings in
+   MATCHES. */
+static char **
+remove_duplicate_matches (char **matches)
+{
+  char *lowest_common;
+  int i, j, newlen;
+  char dead_slot;
+  char **temp_array;
+
+  /* Sort the items. */
+  for (i = 0; matches[i]; i++)
+    ;
+
+  /* Sort the array without matches[0], since we need it to
+     stay in place no matter what. */
+  if (i && rl_sort_completion_matches)
+    qsort (matches+1, i-1, sizeof (char *), (QSFUNC *)_rl_qsort_string_compare);
+
+  /* Remember the lowest common denominator for it may be unique. */
+  lowest_common = savestring (matches[0]);
+
+  for (i = newlen = 0; matches[i + 1]; i++)
+    {
+      if (strcmp (matches[i], matches[i + 1]) == 0)
+	{
+	  xfree (matches[i]);
+	  matches[i] = (char *)&dead_slot;
+	}
+      else
+	newlen++;
+    }
+
+  /* We have marked all the dead slots with (char *)&dead_slot.
+     Copy all the non-dead entries into a new array. */
+  temp_array = (char **)xmalloc ((3 + newlen) * sizeof (char *));
+  for (i = j = 1; matches[i]; i++)
+    {
+      if (matches[i] != (char *)&dead_slot)
+	temp_array[j++] = matches[i];
+    }
+  temp_array[j] = (char *)NULL;
+
+  if (matches[0] != (char *)&dead_slot)
+    xfree (matches[0]);
+
+  /* Place the lowest common denominator back in [0]. */
+  temp_array[0] = lowest_common;
+
+  /* If there is one string left, and it is identical to the
+     lowest common denominator, then the LCD is the string to
+     insert. */
+  if (j == 2 && strcmp (temp_array[0], temp_array[1]) == 0)
+    {
+      xfree (temp_array[1]);
+      temp_array[1] = (char *)NULL;
+    }
+  return (temp_array);
+}
+
+/* Find the common prefix of the list of matches, and put it into
+   matches[0]. */
+static int
+compute_lcd_of_matches (char **match_list, int matches, const char *text)
+{
+  register int i, c1, c2, si;
+  int low;		/* Count of max-matched characters. */
+  int lx;
+  char *dtext;		/* dequoted TEXT, if needed */
+#if defined (HANDLE_MULTIBYTE)
+  int v;
+  size_t v1, v2;
+  mbstate_t ps1, ps2;
+  wchar_t wc1, wc2;
+#endif
+
+  /* If only one match, just use that.  Otherwise, compare each
+     member of the list with the next, finding out where they
+     stop matching. */
+  if (matches == 1)
+    {
+      match_list[0] = match_list[1];
+      match_list[1] = (char *)NULL;
+      return 1;
+    }
+
+  for (i = 1, low = 100000; i < matches; i++)
+    {
+#if defined (HANDLE_MULTIBYTE)
+      if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+	{
+	  memset (&ps1, 0, sizeof (mbstate_t));
+	  memset (&ps2, 0, sizeof (mbstate_t));
+	}
+#endif
+      for (si = 0; (c1 = match_list[i][si]) && (c2 = match_list[i + 1][si]); si++)
+	{
+	    if (_rl_completion_case_fold)
+	      {
+	        c1 = _rl_to_lower (c1);
+	        c2 = _rl_to_lower (c2);
+	      }
+#if defined (HANDLE_MULTIBYTE)
+	    if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+	      {
+		v1 = mbrtowc(&wc1, match_list[i]+si, strlen (match_list[i]+si), &ps1);
+		v2 = mbrtowc (&wc2, match_list[i+1]+si, strlen (match_list[i+1]+si), &ps2);
+		if (MB_INVALIDCH (v1) || MB_INVALIDCH (v2))
+		  {
+		    if (c1 != c2)	/* do byte comparison */
+		      break;
+		    continue;
+		  }
+		if (_rl_completion_case_fold)
+		  {
+		    wc1 = towlower (wc1);
+		   wc2 = towlower (wc2);
+		  }
+		if (wc1 != wc2)
+		  break;
+		else if (v1 > 1)
+		  si += v1 - 1;
+	      }
+	    else
+#endif
+	    if (c1 != c2)
+	      break;
+	}
+
+      if (low > si)
+	low = si;
+    }
+
+  /* If there were multiple matches, but none matched up to even the
+     first character, and the user typed something, use that as the
+     value of matches[0]. */
+  if (low == 0 && text && *text)
+    {
+      match_list[0] = (char *)xmalloc (strlen (text) + 1);
+      strcpy (match_list[0], text);
+    }
+  else
+    {
+      match_list[0] = (char *)xmalloc (low + 1);
+
+      /* XXX - this might need changes in the presence of multibyte chars */
+
+      /* If we are ignoring case, try to preserve the case of the string
+	 the user typed in the face of multiple matches differing in case. */
+      if (_rl_completion_case_fold)
+	{
+	  /* We're making an assumption here:
+		IF we're completing filenames AND
+		   the application has defined a filename dequoting function AND
+		   we found a quote character AND
+		   the application has requested filename quoting
+		THEN
+		   we assume that TEXT was dequoted before checking against
+		   the file system and needs to be dequoted here before we
+		   check against the list of matches
+		FI */
+	  dtext = (char *)NULL;
+	  if (rl_filename_completion_desired &&
+	      rl_filename_dequoting_function &&
+	      rl_completion_found_quote &&
+	      rl_filename_quoting_desired)
+	    {
+	      dtext = (*rl_filename_dequoting_function) ((char *)text, rl_completion_quote_character);
+	      text = dtext;
+	    }
+
+	  /* sort the list to get consistent answers. */
+	  if (rl_sort_completion_matches)
+	    qsort (match_list+1, matches, sizeof(char *), (QSFUNC *)_rl_qsort_string_compare);
+
+	  si = strlen (text);
+	  lx = (si <= low) ? si : low;	/* check shorter of text and matches */
+	  /* Try to preserve the case of what the user typed in the presence of
+	     multiple matches: check each match for something that matches
+	     what the user typed taking case into account; use it up to common
+	     length of matches if one is found.  If not, just use first match. */
+	  for (i = 1; i <= matches; i++)
+	    if (strncmp (match_list[i], text, lx) == 0)
+	      {
+		strncpy (match_list[0], match_list[i], low);
+		break;
+	      }
+	  /* no casematch, use first entry */
+	  if (i > matches)
+	    strncpy (match_list[0], match_list[1], low);
+
+	  FREE (dtext);
+	}
+      else
+        strncpy (match_list[0], match_list[1], low);
+
+      match_list[0][low] = '\0';
+    }
+
+  return matches;
+}
+
+static int
+postprocess_matches (char ***matchesp, int matching_filenames)
+{
+  char *t, **matches, **temp_matches;
+  int nmatch, i;
+
+  matches = *matchesp;
+
+  if (matches == 0)
+    return 0;
+
+  /* It seems to me that in all the cases we handle we would like
+     to ignore duplicate possibilities.  Scan for the text to
+     insert being identical to the other completions. */
+  if (rl_ignore_completion_duplicates)
+    {
+      temp_matches = remove_duplicate_matches (matches);
+      xfree (matches);
+      matches = temp_matches;
+    }
+
+  /* If we are matching filenames, then here is our chance to
+     do clever processing by re-examining the list.  Call the
+     ignore function with the array as a parameter.  It can
+     munge the array, deleting matches as it desires. */
+  if (rl_ignore_some_completions_function && matching_filenames)
+    {
+      for (nmatch = 1; matches[nmatch]; nmatch++)
+	;
+      (void)(*rl_ignore_some_completions_function) (matches);
+      if (matches == 0 || matches[0] == 0)
+	{
+	  FREE (matches);
+	  *matchesp = (char **)0;
+	  return 0;
+        }
+      else
+	{
+	  /* If we removed some matches, recompute the common prefix. */
+	  for (i = 1; matches[i]; i++)
+	    ;
+	  if (i > 1 && i < nmatch)
+	    {
+	      t = matches[0];
+	      compute_lcd_of_matches (matches, i - 1, t);
+	      FREE (t);
+	    }
+	}
+    }
+
+  *matchesp = matches;
+  return (1);
+}
+
+static int
+complete_get_screenwidth (void)
+{
+  int cols;
+  char *envcols;
+
+  cols = _rl_completion_columns;
+  if (cols >= 0 && cols <= _rl_screenwidth)
+    return cols;
+  envcols = getenv ("COLUMNS");
+  if (envcols && *envcols)
+    cols = atoi (envcols);
+  if (cols >= 0 && cols <= _rl_screenwidth)
+    return cols;
+  return _rl_screenwidth;
+}
+
+/* A convenience function for displaying a list of strings in
+   columnar format on readline's output stream.  MATCHES is the list
+   of strings, in argv format, LEN is the number of strings in MATCHES,
+   and MAX is the length of the longest string in MATCHES. */
+void
+rl_display_match_list (char **matches, int len, int max)
+{
+  int count, limit, printed_len, lines, cols;
+  int i, j, k, l, common_length, sind;
+  char *temp, *t;
+
+  /* Find the length of the prefix common to all items: length as displayed
+     characters (common_length) and as a byte index into the matches (sind) */
+  common_length = sind = 0;
+  if (_rl_completion_prefix_display_length > 0)
+    {
+      t = printable_part (matches[0]);
+      /* check again in case of /usr/src/ */
+      temp = rl_filename_completion_desired ? strrchr (t, '/') : 0;
+      common_length = temp ? fnwidth (temp) : fnwidth (t);
+      sind = temp ? strlen (temp) : strlen (t);
+      if (common_length > max || sind > max)
+	common_length = sind = 0;
+
+      if (common_length > _rl_completion_prefix_display_length && common_length > ELLIPSIS_LEN)
+	max -= common_length - ELLIPSIS_LEN;
+      else
+	common_length = sind = 0;
+    }
+#if defined (COLOR_SUPPORT)
+  else if (_rl_colored_completion_prefix > 0)
+    {
+      t = printable_part (matches[0]);
+      temp = rl_filename_completion_desired ? strrchr (t, '/') : 0;
+      common_length = temp ? fnwidth (temp) : fnwidth (t);
+      sind = temp ? RL_STRLEN (temp+1) : RL_STRLEN (t);		/* want portion after final slash */
+      if (common_length > max || sind > max)
+	common_length = sind = 0;
+    }
+#endif
+
+  /* How many items of MAX length can we fit in the screen window? */
+  cols = complete_get_screenwidth ();
+  max += 2;
+  limit = cols / max;
+  if (limit != 1 && (limit * max == cols))
+    limit--;
+
+  /* If cols == 0, limit will end up -1 */
+  if (cols < _rl_screenwidth && limit < 0)
+    limit = 1;
+
+  /* Avoid a possible floating exception.  If max > cols,
+     limit will be 0 and a divide-by-zero fault will result. */
+  if (limit == 0)
+    limit = 1;
+
+  /* How many iterations of the printing loop? */
+  count = (len + (limit - 1)) / limit;
+
+  /* Watch out for special case.  If LEN is less than LIMIT, then
+     just do the inner printing loop.
+	   0 < len <= limit  implies  count = 1. */
+
+  /* Sort the items if they are not already sorted. */
+  if (rl_ignore_completion_duplicates == 0 && rl_sort_completion_matches)
+    qsort (matches + 1, len, sizeof (char *), (QSFUNC *)_rl_qsort_string_compare);
+
+  rl_crlf ();
+
+  lines = 0;
+  if (_rl_print_completions_horizontally == 0)
+    {
+      /* Print the sorted items, up-and-down alphabetically, like ls. */
+      for (i = 1; i <= count; i++)
+	{
+	  for (j = 0, l = i; j < limit; j++)
+	    {
+	      if (l > len || matches[l] == 0)
+		break;
+	      else
+		{
+		  temp = printable_part (matches[l]);
+		  printed_len = print_filename (temp, matches[l], sind);
+
+		  if (j + 1 < limit)
+		    {
+		      if (max <= printed_len)
+			putc (' ', rl_outstream);
+		      else
+			for (k = 0; k < max - printed_len; k++)
+			  putc (' ', rl_outstream);
+		    }
+		}
+	      l += count;
+	    }
+	  rl_crlf ();
+#if defined (SIGWINCH)
+	  if (RL_SIG_RECEIVED () && RL_SIGWINCH_RECEIVED() == 0)
+#else
+	  if (RL_SIG_RECEIVED ())
+#endif
+	    return;
+	  lines++;
+	  if (_rl_page_completions && lines >= (_rl_screenheight - 1) && i < count)
+	    {
+	      lines = _rl_internal_pager (lines);
+	      if (lines < 0)
+		return;
+	    }
+	}
+    }
+  else
+    {
+      /* Print the sorted items, across alphabetically, like ls -x. */
+      for (i = 1; matches[i]; i++)
+	{
+	  temp = printable_part (matches[i]);
+	  printed_len = print_filename (temp, matches[i], sind);
+	  /* Have we reached the end of this line? */
+#if defined (SIGWINCH)
+	  if (RL_SIG_RECEIVED () && RL_SIGWINCH_RECEIVED() == 0)
+#else
+	  if (RL_SIG_RECEIVED ())
+#endif
+	    return;
+	  if (matches[i+1])
+	    {
+	      if (limit == 1 || (i && (limit > 1) && (i % limit) == 0))
+		{
+		  rl_crlf ();
+		  lines++;
+		  if (_rl_page_completions && lines >= _rl_screenheight - 1)
+		    {
+		      lines = _rl_internal_pager (lines);
+		      if (lines < 0)
+			return;
+		    }
+		}
+	      else if (max <= printed_len)
+		putc (' ', rl_outstream);
+	      else
+		for (k = 0; k < max - printed_len; k++)
+		  putc (' ', rl_outstream);
+	    }
+	}
+      rl_crlf ();
+    }
+}
+
+/* Display MATCHES, a list of matching filenames in argv format.  This
+   handles the simple case -- a single match -- first.  If there is more
+   than one match, we compute the number of strings in the list and the
+   length of the longest string, which will be needed by the display
+   function.  If the application wants to handle displaying the list of
+   matches itself, it sets RL_COMPLETION_DISPLAY_MATCHES_HOOK to the
+   address of a function, and we just call it.  If we're handling the
+   display ourselves, we just call rl_display_match_list.  We also check
+   that the list of matches doesn't exceed the user-settable threshold,
+   and ask the user if he wants to see the list if there are more matches
+   than RL_COMPLETION_QUERY_ITEMS. */
+static void
+display_matches (char **matches)
+{
+  int len, max, i;
+  char *temp;
+
+  /* Move to the last visible line of a possibly-multiple-line command. */
+  _rl_move_vert (_rl_vis_botlin);
+
+  /* Handle simple case first.  What if there is only one answer? */
+  if (matches[1] == 0)
+    {
+      temp = printable_part (matches[0]);
+      rl_crlf ();
+      print_filename (temp, matches[0], 0);
+      rl_crlf ();
+
+      rl_forced_update_display ();
+      rl_display_fixed = 1;
+
+      return;
+    }
+
+  /* There is more than one answer.  Find out how many there are,
+     and find the maximum printed length of a single entry. */
+  for (max = 0, i = 1; matches[i]; i++)
+    {
+      temp = printable_part (matches[i]);
+      len = fnwidth (temp);
+
+      if (len > max)
+	max = len;
+    }
+
+  len = i - 1;
+
+  /* If the caller has defined a display hook, then call that now. */
+  if (rl_completion_display_matches_hook)
+    {
+      (*rl_completion_display_matches_hook) (matches, len, max);
+      return;
+    }
+	
+  /* If there are many items, then ask the user if she really wants to
+     see them all. */
+  if (rl_completion_query_items > 0 && len >= rl_completion_query_items)
+    {
+      rl_crlf ();
+      fprintf (rl_outstream, "Display all %d possibilities? (y or n)", len);
+      fflush (rl_outstream);
+      if ((completion_y_or_n = get_y_or_n (0)) == 0)
+	{
+	  rl_crlf ();
+
+	  rl_forced_update_display ();
+	  rl_display_fixed = 1;
+
+	  return;
+	}
+    }
+
+  rl_display_match_list (matches, len, max);
+
+  rl_forced_update_display ();
+  rl_display_fixed = 1;
+}
+
+/* qc == pointer to quoting character, if any */
+static char *
+make_quoted_replacement (char *match, int mtype, char *qc)
+{
+  int should_quote, do_replace;
+  char *replacement;
+
+  /* If we are doing completion on quoted substrings, and any matches
+     contain any of the completer_word_break_characters, then auto-
+     matically prepend the substring with a quote character (just pick
+     the first one from the list of such) if it does not already begin
+     with a quote string.  FIXME: Need to remove any such automatically
+     inserted quote character when it no longer is necessary, such as
+     if we change the string we are completing on and the new set of
+     matches don't require a quoted substring. */
+  replacement = match;
+
+  should_quote = match && rl_completer_quote_characters &&
+			rl_filename_completion_desired &&
+			rl_filename_quoting_desired;
+
+  if (should_quote)
+    should_quote = should_quote && (!qc || !*qc ||
+		     (rl_completer_quote_characters && strchr (rl_completer_quote_characters, *qc)));
+
+  if (should_quote)
+    {
+      /* If there is a single match, see if we need to quote it.
+         This also checks whether the common prefix of several
+	 matches needs to be quoted. */
+      should_quote = rl_filename_quote_characters
+			? (_rl_strpbrk (match, rl_filename_quote_characters) != 0)
+			: 0;
+
+      do_replace = should_quote ? mtype : NO_MATCH;
+      /* Quote the replacement, since we found an embedded
+	 word break character in a potential match. */
+      if (do_replace != NO_MATCH && rl_filename_quoting_function)
+	replacement = (*rl_filename_quoting_function) (match, do_replace, qc);
+    }
+  return (replacement);
+}
+
+static void
+insert_match (char *match, int start, int mtype, char *qc)
+{
+  char *replacement, *r;
+  char oqc;
+  int end, rlen;
+
+  oqc = qc ? *qc : '\0';
+  replacement = make_quoted_replacement (match, mtype, qc);
+
+  /* Now insert the match. */
+  if (replacement)
+    {
+      rlen = strlen (replacement);
+      /* Don't double an opening quote character. */
+      if (qc && *qc && start && rl_line_buffer[start - 1] == *qc &&
+	    replacement[0] == *qc)
+	start--;
+      /* If make_quoted_replacement changed the quoting character, remove
+	 the opening quote and insert the (fully-quoted) replacement. */
+      else if (qc && (*qc != oqc) && start && rl_line_buffer[start - 1] == oqc &&
+	    replacement[0] != oqc)
+	start--;
+      end = rl_point - 1;
+      /* Don't double a closing quote character */
+      if (qc && *qc && end && rl_line_buffer[rl_point] == *qc && replacement[rlen - 1] == *qc)
+        end++;
+      if (_rl_skip_completed_text)
+	{
+	  r = replacement;
+	  while (start < rl_end && *r && rl_line_buffer[start] == *r)
+	    {
+	      start++;
+	      r++;
+	    }
+	  if (start <= end || *r)
+	    _rl_replace_text (r, start, end);
+	  rl_point = start + strlen (r);
+	}
+      else
+	_rl_replace_text (replacement, start, end);
+      if (replacement != match)
+        xfree (replacement);
+    }
+}
+
+/* Append any necessary closing quote and a separator character to the
+   just-inserted match.  If the user has specified that directories
+   should be marked by a trailing `/', append one of those instead.  The
+   default trailing character is a space.  Returns the number of characters
+   appended.  If NONTRIVIAL_MATCH is set, we test for a symlink (if the OS
+   has them) and don't add a suffix for a symlink to a directory.  A
+   nontrivial match is one that actually adds to the word being completed.
+   The variable rl_completion_mark_symlink_dirs controls this behavior
+   (it's initially set to the what the user has chosen, indicated by the
+   value of _rl_complete_mark_symlink_dirs, but may be modified by an
+   application's completion function). */
+static int
+append_to_match (char *text, int delimiter, int quote_char, int nontrivial_match)
+{
+  char temp_string[4], *filename, *fn;
+  int temp_string_index, s;
+  struct stat finfo;
+
+  temp_string_index = 0;
+  if (quote_char && rl_point && rl_completion_suppress_quote == 0 &&
+      rl_line_buffer[rl_point - 1] != quote_char)
+    temp_string[temp_string_index++] = quote_char;
+
+  if (delimiter)
+    temp_string[temp_string_index++] = delimiter;
+  else if (rl_completion_suppress_append == 0 && rl_completion_append_character)
+    temp_string[temp_string_index++] = rl_completion_append_character;
+
+  temp_string[temp_string_index++] = '\0';
+
+  if (rl_filename_completion_desired)
+    {
+      filename = tilde_expand (text);
+      if (rl_filename_stat_hook)
+        {
+          fn = savestring (filename);
+	  (*rl_filename_stat_hook) (&fn);
+	  xfree (filename);
+	  filename = fn;
+        }
+      s = (nontrivial_match && rl_completion_mark_symlink_dirs == 0)
+		? LSTAT (filename, &finfo)
+		: stat (filename, &finfo);
+      if (s == 0 && S_ISDIR (finfo.st_mode))
+	{
+	  if (_rl_complete_mark_directories /* && rl_completion_suppress_append == 0 */)
+	    {
+	      /* This is clumsy.  Avoid putting in a double slash if point
+		 is at the end of the line and the previous character is a
+		 slash. */
+	      if (rl_point && rl_line_buffer[rl_point] == '\0' && rl_line_buffer[rl_point - 1] == '/')
+		;
+	      else if (rl_line_buffer[rl_point] != '/')
+		rl_insert_text ("/");
+	    }
+	}
+#ifdef S_ISLNK
+      /* Don't add anything if the filename is a symlink and resolves to a
+	 directory. */
+      else if (s == 0 && S_ISLNK (finfo.st_mode) && path_isdir (filename))
+	;
+#endif
+      else
+	{
+	  if (rl_point == rl_end && temp_string_index)
+	    rl_insert_text (temp_string);
+	}
+      xfree (filename);
+    }
+  else
+    {
+      if (rl_point == rl_end && temp_string_index)
+	rl_insert_text (temp_string);
+    }
+
+  return (temp_string_index);
+}
+
+static void
+insert_all_matches (char **matches, int point, char *qc)
+{
+  int i;
+  char *rp;
+
+  rl_begin_undo_group ();
+  /* remove any opening quote character; make_quoted_replacement will add
+     it back. */
+  if (qc && *qc && point && rl_line_buffer[point - 1] == *qc)
+    point--;
+  rl_delete_text (point, rl_point);
+  rl_point = point;
+
+  if (matches[1])
+    {
+      for (i = 1; matches[i]; i++)
+	{
+	  rp = make_quoted_replacement (matches[i], SINGLE_MATCH, qc);
+	  rl_insert_text (rp);
+	  rl_insert_text (" ");
+	  if (rp != matches[i])
+	    xfree (rp);
+	}
+    }
+  else
+    {
+      rp = make_quoted_replacement (matches[0], SINGLE_MATCH, qc);
+      rl_insert_text (rp);
+      rl_insert_text (" ");
+      if (rp != matches[0])
+	xfree (rp);
+    }
+  rl_end_undo_group ();
+}
+
+void
+_rl_free_match_list (char **matches)
+{
+  register int i;
+
+  if (matches == 0)
+    return;
+
+  for (i = 0; matches[i]; i++)
+    xfree (matches[i]);
+  xfree (matches);
+}
+
+/* Compare a possibly-quoted filename TEXT from the line buffer and a possible
+   MATCH that is the product of filename completion, which acts on the dequoted
+   text. */
+static int
+compare_match (char *text, const char *match)
+{
+  char *temp;
+  int r;
+
+  if (rl_filename_completion_desired && rl_filename_quoting_desired && 
+      rl_completion_found_quote && rl_filename_dequoting_function)
+    {
+      temp = (*rl_filename_dequoting_function) (text, rl_completion_quote_character);
+      r = strcmp (temp, match);
+      free (temp);
+      return r;
+    }      
+  return (strcmp (text, match));
+}
+
+/* Complete the word at or before point.
+   WHAT_TO_DO says what to do with the completion.
+   `?' means list the possible completions.
+   TAB means do standard completion.
+   `*' means insert all of the possible completions.
+   `!' means to do standard completion, and list all possible completions if
+   there is more than one.
+   `@' means to do standard completion, and list all possible completions if
+   there is more than one and partial completion is not possible. */
+int
+rl_complete_internal (int what_to_do)
+{
+  char **matches;
+  rl_compentry_func_t *our_func;
+  int start, end, delimiter, found_quote, i, nontrivial_lcd;
+  char *text, *saved_line_buffer;
+  char quote_char;
+  int tlen, mlen, saved_last_completion_failed;
+
+  RL_SETSTATE(RL_STATE_COMPLETING);
+
+  saved_last_completion_failed = last_completion_failed;
+
+  set_completion_defaults (what_to_do);
+
+  saved_line_buffer = rl_line_buffer ? savestring (rl_line_buffer) : (char *)NULL;
+  our_func = rl_completion_entry_function
+		? rl_completion_entry_function
+		: rl_filename_completion_function;
+  /* We now look backwards for the start of a filename/variable word. */
+  end = rl_point;
+  found_quote = delimiter = 0;
+  quote_char = '\0';
+
+  if (rl_point)
+    /* This (possibly) changes rl_point.  If it returns a non-zero char,
+       we know we have an open quote. */
+    quote_char = _rl_find_completion_word (&found_quote, &delimiter);
+
+  start = rl_point;
+  rl_point = end;
+
+  text = rl_copy_text (start, end);
+  matches = gen_completion_matches (text, start, end, our_func, found_quote, quote_char);
+  /* nontrivial_lcd is set if the common prefix adds something to the word
+     being completed. */
+  nontrivial_lcd = matches && compare_match (text, matches[0]) != 0;
+  if (what_to_do == '!' || what_to_do == '@')
+    tlen = strlen (text);
+  xfree (text);
+
+  if (matches == 0)
+    {
+      rl_ding ();
+      FREE (saved_line_buffer);
+      completion_changed_buffer = 0;
+      last_completion_failed = 1;
+      RL_UNSETSTATE(RL_STATE_COMPLETING);
+      _rl_reset_completion_state ();
+      return (0);
+    }
+
+  /* If we are matching filenames, the attempted completion function will
+     have set rl_filename_completion_desired to a non-zero value.  The basic
+     rl_filename_completion_function does this. */
+  i = rl_filename_completion_desired;
+
+  if (postprocess_matches (&matches, i) == 0)
+    {
+      rl_ding ();
+      FREE (saved_line_buffer);
+      completion_changed_buffer = 0;
+      last_completion_failed = 1;
+      RL_UNSETSTATE(RL_STATE_COMPLETING);
+      _rl_reset_completion_state ();
+      return (0);
+    }
+
+  if (matches && matches[0] && *matches[0])
+    last_completion_failed = 0;
+
+  switch (what_to_do)
+    {
+    case TAB:
+    case '!':
+    case '@':
+      /* Insert the first match with proper quoting. */
+      if (what_to_do == TAB)
+        {
+          if (*matches[0])
+	    insert_match (matches[0], start, matches[1] ? MULT_MATCH : SINGLE_MATCH, &quote_char);
+        }
+      else if (*matches[0] && matches[1] == 0)
+	/* should we perform the check only if there are multiple matches? */
+	insert_match (matches[0], start, matches[1] ? MULT_MATCH : SINGLE_MATCH, &quote_char);
+      else if (*matches[0])	/* what_to_do != TAB && multiple matches */
+	{
+	  mlen = *matches[0] ? strlen (matches[0]) : 0;
+	  if (mlen >= tlen)
+	    insert_match (matches[0], start, matches[1] ? MULT_MATCH : SINGLE_MATCH, &quote_char);
+	}
+
+      /* If there are more matches, ring the bell to indicate.
+	 If we are in vi mode, Posix.2 says to not ring the bell.
+	 If the `show-all-if-ambiguous' variable is set, display
+	 all the matches immediately.  Otherwise, if this was the
+	 only match, and we are hacking files, check the file to
+	 see if it was a directory.  If so, and the `mark-directories'
+	 variable is set, add a '/' to the name.  If not, and we
+	 are at the end of the line, then add a space.  */
+      if (matches[1])
+	{
+	  if (what_to_do == '!')
+	    {
+	      display_matches (matches);
+	      break;
+	    }
+	  else if (what_to_do == '@')
+	    {
+	      if (nontrivial_lcd == 0)
+		display_matches (matches);
+	      break;
+	    }
+	  else if (rl_editing_mode != vi_mode)
+	    rl_ding ();	/* There are other matches remaining. */
+	}
+      else
+	append_to_match (matches[0], delimiter, quote_char, nontrivial_lcd);
+
+      break;
+
+    case '*':
+      insert_all_matches (matches, start, &quote_char);
+      break;
+
+    case '?':
+      /* Let's try to insert a single match here if the last completion failed
+	 but this attempt returned a single match. */
+      if (saved_last_completion_failed && matches[0] && *matches[0] && matches[1] == 0)
+	{
+	  insert_match (matches[0], start, matches[1] ? MULT_MATCH : SINGLE_MATCH, &quote_char);
+	  append_to_match (matches[0], delimiter, quote_char, nontrivial_lcd);
+	  break;
+	}
+      
+      if (rl_completion_display_matches_hook == 0)
+	{
+	  _rl_sigcleanup = _rl_complete_sigcleanup;
+	  _rl_sigcleanarg = matches;
+	  _rl_complete_display_matches_interrupt = 0;
+	}
+      display_matches (matches);
+      if (_rl_complete_display_matches_interrupt)
+        {
+          matches = 0;		/* already freed by rl_complete_sigcleanup */
+          _rl_complete_display_matches_interrupt = 0;
+	  if (rl_signal_event_hook)
+	    (*rl_signal_event_hook) ();		/* XXX */
+        }
+      _rl_sigcleanup = 0;
+      _rl_sigcleanarg = 0;
+      break;
+
+    default:
+      _rl_ttymsg ("bad value %d for what_to_do in rl_complete", what_to_do);
+      rl_ding ();
+      FREE (saved_line_buffer);
+      RL_UNSETSTATE(RL_STATE_COMPLETING);
+      _rl_free_match_list (matches);
+      _rl_reset_completion_state ();
+      return 1;
+    }
+
+  _rl_free_match_list (matches);
+
+  /* Check to see if the line has changed through all of this manipulation. */
+  if (saved_line_buffer)
+    {
+      completion_changed_buffer = strcmp (rl_line_buffer, saved_line_buffer) != 0;
+      xfree (saved_line_buffer);
+    }
+
+  RL_UNSETSTATE(RL_STATE_COMPLETING);
+  _rl_reset_completion_state ();
+
+  RL_CHECK_SIGNALS ();
+  return 0;
+}
+
+/***************************************************************/
+/*							       */
+/*  Application-callable completion match generator functions  */
+/*							       */
+/***************************************************************/
+
+/* Return an array of (char *) which is a list of completions for TEXT.
+   If there are no completions, return a NULL pointer.
+   The first entry in the returned array is the substitution for TEXT.
+   The remaining entries are the possible completions.
+   The array is terminated with a NULL pointer.
+
+   ENTRY_FUNCTION is a function of two args, and returns a (char *).
+     The first argument is TEXT.
+     The second is a state argument; it should be zero on the first call, and
+     non-zero on subsequent calls.  It returns a NULL pointer to the caller
+     when there are no more matches.
+ */
+char **
+rl_completion_matches (const char *text, rl_compentry_func_t *entry_function)
+{
+  register int i;
+
+  /* Number of slots in match_list. */
+  int match_list_size;
+
+  /* The list of matches. */
+  char **match_list;
+
+  /* Number of matches actually found. */
+  int matches;
+
+  /* Temporary string binder. */
+  char *string;
+
+  matches = 0;
+  match_list_size = 10;
+  match_list = (char **)xmalloc ((match_list_size + 1) * sizeof (char *));
+  match_list[1] = (char *)NULL;
+
+  while (string = (*entry_function) (text, matches))
+    {
+      if (RL_SIG_RECEIVED ())
+	{
+	  /* Start at 1 because we don't set matches[0] in this function.
+	     Only free the list members if we're building match list from
+	     rl_filename_completion_function, since we know that doesn't
+	     free the strings it returns. */
+	  if (entry_function == rl_filename_completion_function)
+	    {
+	      for (i = 1; match_list[i]; i++)
+		xfree (match_list[i]);
+	    }
+	  xfree (match_list);
+	  match_list = 0;
+	  match_list_size = 0;
+	  matches = 0;
+	  RL_CHECK_SIGNALS ();
+	}
+
+      if (matches + 1 >= match_list_size)
+	match_list = (char **)xrealloc
+	  (match_list, ((match_list_size += 10) + 1) * sizeof (char *));
+
+      if (match_list == 0)
+	return (match_list);
+
+      match_list[++matches] = string;
+      match_list[matches + 1] = (char *)NULL;
+    }
+
+  /* If there were any matches, then look through them finding out the
+     lowest common denominator.  That then becomes match_list[0]. */
+  if (matches)
+    compute_lcd_of_matches (match_list, matches, text);
+  else				/* There were no matches. */
+    {
+      xfree (match_list);
+      match_list = (char **)NULL;
+    }
+  return (match_list);
+}
+
+/* A completion function for usernames.
+   TEXT contains a partial username preceded by a random
+   character (usually `~').  */
+char *
+rl_username_completion_function (const char *text, int state)
+{
+#if defined (__WIN32__) || defined (__OPENNT)
+  return (char *)NULL;
+#else /* !__WIN32__ && !__OPENNT) */
+  static char *username = (char *)NULL;
+  static struct passwd *entry;
+  static int namelen, first_char, first_char_loc;
+  char *value;
+
+  if (state == 0)
+    {
+      FREE (username);
+
+      first_char = *text;
+      first_char_loc = first_char == '~';
+
+      username = savestring (&text[first_char_loc]);
+      namelen = strlen (username);
+#if defined (HAVE_GETPWENT)
+      setpwent ();
+#endif
+    }
+
+#if defined (HAVE_GETPWENT)
+  while (entry = getpwent ())
+    {
+      /* Null usernames should result in all users as possible completions. */
+      if (namelen == 0 || (STREQN (username, entry->pw_name, namelen)))
+	break;
+    }
+#endif
+
+  if (entry == 0)
+    {
+#if defined (HAVE_GETPWENT)
+      endpwent ();
+#endif
+      return ((char *)NULL);
+    }
+  else
+    {
+      value = (char *)xmalloc (2 + strlen (entry->pw_name));
+
+      *value = *text;
+
+      strcpy (value + first_char_loc, entry->pw_name);
+
+      if (first_char == '~')
+	rl_filename_completion_desired = 1;
+
+      return (value);
+    }
+#endif /* !__WIN32__ && !__OPENNT */
+}
+
+/* Return non-zero if CONVFN matches FILENAME up to the length of FILENAME
+   (FILENAME_LEN).  If _rl_completion_case_fold is set, compare without
+   regard to the alphabetic case of characters.  If
+   _rl_completion_case_map is set, make `-' and `_' equivalent.  CONVFN is
+   the possibly-converted directory entry; FILENAME is what the user typed. */
+static int
+complete_fncmp (const char *convfn, int convlen, const char *filename, int filename_len)
+{
+  register char *s1, *s2;
+  int d, len;
+#if defined (HANDLE_MULTIBYTE)
+  size_t v1, v2;
+  mbstate_t ps1, ps2;
+  wchar_t wc1, wc2;
+#endif
+
+#if defined (HANDLE_MULTIBYTE)
+  memset (&ps1, 0, sizeof (mbstate_t));
+  memset (&ps2, 0, sizeof (mbstate_t));
+#endif
+
+  if (filename_len == 0)
+    return 1;
+  if (convlen < filename_len)
+    return 0;
+
+  len = filename_len;
+  s1 = (char *)convfn;
+  s2 = (char *)filename;
+
+  /* Otherwise, if these match up to the length of filename, then
+     it is a match. */
+  if (_rl_completion_case_fold && _rl_completion_case_map)
+    {
+      /* Case-insensitive comparison treating _ and - as equivalent */
+#if defined (HANDLE_MULTIBYTE)
+      if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+	{
+	  do
+	    {
+	      v1 = mbrtowc (&wc1, s1, convlen, &ps1);
+	      v2 = mbrtowc (&wc2, s2, filename_len, &ps2);
+	      if (v1 == 0 && v2 == 0)
+		return 1;
+	      else if (MB_INVALIDCH (v1) || MB_INVALIDCH (v2))
+		{
+		  if (*s1 != *s2)		/* do byte comparison */
+		    return 0;
+		  else if ((*s1 == '-' || *s1 == '_') && (*s2 == '-' || *s2 == '_'))
+		    return 0;
+		  s1++; s2++; len--;
+		  continue;
+		}
+	      wc1 = towlower (wc1);
+	      wc2 = towlower (wc2);
+	      s1 += v1;
+	      s2 += v1;
+	      len -= v1;
+	      if ((wc1 == L'-' || wc1 == L'_') && (wc2 == L'-' || wc2 == L'_'))
+	        continue;
+	      if (wc1 != wc2)
+		return 0;
+	    }
+	  while (len != 0);
+	}
+      else
+#endif
+	{
+	do
+	  {
+	    d = _rl_to_lower (*s1) - _rl_to_lower (*s2);
+	    /* *s1 == [-_] && *s2 == [-_] */
+	    if ((*s1 == '-' || *s1 == '_') && (*s2 == '-' || *s2 == '_'))
+	      d = 0;
+	    if (d != 0)
+	      return 0;
+	    s1++; s2++;	/* already checked convlen >= filename_len */
+	  }
+	while (--len != 0);
+	}
+
+      return 1;
+    }
+  else if (_rl_completion_case_fold)
+    {
+#if defined (HANDLE_MULTIBYTE)
+      if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+	{
+	  do
+	    {
+	      v1 = mbrtowc (&wc1, s1, convlen, &ps1);
+	      v2 = mbrtowc (&wc2, s2, filename_len, &ps2);
+	      if (v1 == 0 && v2 == 0)
+		return 1;
+	      else if (MB_INVALIDCH (v1) || MB_INVALIDCH (v2))
+		{
+		  if (*s1 != *s2)		/* do byte comparison */
+		    return 0;
+		  s1++; s2++; len--;
+		  continue;
+		}
+	      wc1 = towlower (wc1);
+	      wc2 = towlower (wc2);
+	      if (wc1 != wc2)
+		return 0;
+	      s1 += v1;
+	      s2 += v1;
+	      len -= v1;
+	    }
+	  while (len != 0);
+	  return 1;
+	}
+      else
+#endif
+      if ((_rl_to_lower (convfn[0]) == _rl_to_lower (filename[0])) &&
+	  (convlen >= filename_len) &&
+	  (_rl_strnicmp (filename, convfn, filename_len) == 0))
+	return 1;
+    }
+  else
+    {
+      if ((convfn[0] == filename[0]) &&
+	  (convlen >= filename_len) &&
+	  (strncmp (filename, convfn, filename_len) == 0))
+	return 1;
+    }
+  return 0;
+}
+
+/* Okay, now we write the entry_function for filename completion.  In the
+   general case.  Note that completion in the shell is a little different
+   because of all the pathnames that must be followed when looking up the
+   completion for a command. */
+char *
+rl_filename_completion_function (const char *text, int state)
+{
+  static DIR *directory = (DIR *)NULL;
+  static char *filename = (char *)NULL;
+  static char *dirname = (char *)NULL;
+  static char *users_dirname = (char *)NULL;
+  static int filename_len;
+  char *temp, *dentry, *convfn;
+  int dirlen, dentlen, convlen;
+  int tilde_dirname;
+  struct dirent *entry;
+
+  /* If we don't have any state, then do some initialization. */
+  if (state == 0)
+    {
+      /* If we were interrupted before closing the directory or reading
+	 all of its contents, close it. */
+      if (directory)
+	{
+	  closedir (directory);
+	  directory = (DIR *)NULL;
+	}
+      FREE (dirname);
+      FREE (filename);
+      FREE (users_dirname);
+
+      filename = savestring (text);
+      if (*text == 0)
+	text = ".";
+      dirname = savestring (text);
+
+      temp = strrchr (dirname, '/');
+
+#if defined (__MSDOS__) || defined (_WIN32)
+      /* special hack for //X/... */
+      if (dirname[0] == '/' && dirname[1] == '/' && ISALPHA ((unsigned char)dirname[2]) && dirname[3] == '/')
+        temp = strrchr (dirname + 3, '/');
+#endif
+
+      if (temp)
+	{
+	  strcpy (filename, ++temp);
+	  *temp = '\0';
+	}
+#if defined (__MSDOS__) || (defined (_WIN32) && !defined (__CYGWIN__))
+      /* searches from current directory on the drive */
+      else if (ISALPHA ((unsigned char)dirname[0]) && dirname[1] == ':')
+        {
+          strcpy (filename, dirname + 2);
+          dirname[2] = '\0';
+        }
+#endif
+      else
+	{
+	  dirname[0] = '.';
+	  dirname[1] = '\0';
+	}
+
+      /* We aren't done yet.  We also support the "~user" syntax. */
+
+      /* Save the version of the directory that the user typed, dequoting
+	 it if necessary. */
+      if (rl_completion_found_quote && rl_filename_dequoting_function)
+	users_dirname = (*rl_filename_dequoting_function) (dirname, rl_completion_quote_character);
+      else
+	users_dirname = savestring (dirname);
+
+      tilde_dirname = 0;
+      if (*dirname == '~')
+	{
+	  temp = tilde_expand (dirname);
+	  xfree (dirname);
+	  dirname = temp;
+	  tilde_dirname = 1;
+	}
+
+      /* We have saved the possibly-dequoted version of the directory name
+	 the user typed.  Now transform the directory name we're going to
+	 pass to opendir(2).  The directory rewrite hook modifies only the
+	 directory name; the directory completion hook modifies both the
+	 directory name passed to opendir(2) and the version the user
+	 typed.  Both the directory completion and rewrite hooks should perform
+	 any necessary dequoting.  The hook functions return 1 if they modify
+	 the directory name argument.  If either hook returns 0, it should
+	 not modify the directory name pointer passed as an argument. */
+      if (rl_directory_rewrite_hook)
+	(*rl_directory_rewrite_hook) (&dirname);
+      else if (rl_directory_completion_hook && (*rl_directory_completion_hook) (&dirname))
+	{
+	  xfree (users_dirname);
+	  users_dirname = savestring (dirname);
+	}
+      else if (tilde_dirname == 0 && rl_completion_found_quote && rl_filename_dequoting_function)
+	{
+	  /* delete single and double quotes */
+	  xfree (dirname);
+	  dirname = savestring (users_dirname);
+	}
+      directory = opendir (dirname);
+
+      /* Now dequote a non-null filename.  FILENAME will not be NULL, but may
+	 be empty. */
+      if (*filename && rl_completion_found_quote && rl_filename_dequoting_function)
+	{
+	  /* delete single and double quotes */
+	  temp = (*rl_filename_dequoting_function) (filename, rl_completion_quote_character);
+	  xfree (filename);
+	  filename = temp;
+	}
+      filename_len = strlen (filename);
+
+      rl_filename_completion_desired = 1;
+    }
+
+  /* At this point we should entertain the possibility of hacking wildcarded
+     filenames, like /usr/man/man<WILD>/te<TAB>.  If the directory name
+     contains globbing characters, then build an array of directories, and
+     then map over that list while completing. */
+  /* *** UNIMPLEMENTED *** */
+
+  /* Now that we have some state, we can read the directory. */
+
+  entry = (struct dirent *)NULL;
+  while (directory && (entry = readdir (directory)))
+    {
+      convfn = dentry = entry->d_name;
+      convlen = dentlen = D_NAMLEN (entry);
+
+      if (rl_filename_rewrite_hook)
+	{
+	  convfn = (*rl_filename_rewrite_hook) (dentry, dentlen);
+	  convlen = (convfn == dentry) ? dentlen : strlen (convfn);
+	}
+
+      /* Special case for no filename.  If the user has disabled the
+         `match-hidden-files' variable, skip filenames beginning with `.'.
+	 All other entries except "." and ".." match. */
+      if (filename_len == 0)
+	{
+	  if (_rl_match_hidden_files == 0 && HIDDEN_FILE (convfn))
+	    continue;
+
+	  if (convfn[0] != '.' ||
+	       (convfn[1] && (convfn[1] != '.' || convfn[2])))
+	    break;
+	}
+      else
+	{
+	  if (complete_fncmp (convfn, convlen, filename, filename_len))
+	    break;
+	}
+    }
+
+  if (entry == 0)
+    {
+      if (directory)
+	{
+	  closedir (directory);
+	  directory = (DIR *)NULL;
+	}
+      if (dirname)
+	{
+	  xfree (dirname);
+	  dirname = (char *)NULL;
+	}
+      if (filename)
+	{
+	  xfree (filename);
+	  filename = (char *)NULL;
+	}
+      if (users_dirname)
+	{
+	  xfree (users_dirname);
+	  users_dirname = (char *)NULL;
+	}
+
+      return (char *)NULL;
+    }
+  else
+    {
+      /* dirname && (strcmp (dirname, ".") != 0) */
+      if (dirname && (dirname[0] != '.' || dirname[1]))
+	{
+	  if (rl_complete_with_tilde_expansion && *users_dirname == '~')
+	    {
+	      dirlen = strlen (dirname);
+	      temp = (char *)xmalloc (2 + dirlen + D_NAMLEN (entry));
+	      strcpy (temp, dirname);
+	      /* Canonicalization cuts off any final slash present.  We
+		 may need to add it back. */
+	      if (dirname[dirlen - 1] != '/')
+	        {
+	          temp[dirlen++] = '/';
+	          temp[dirlen] = '\0';
+	        }
+	    }
+	  else
+	    {
+	      dirlen = strlen (users_dirname);
+	      temp = (char *)xmalloc (2 + dirlen + D_NAMLEN (entry));
+	      strcpy (temp, users_dirname);
+	      /* Make sure that temp has a trailing slash here. */
+	      if (users_dirname[dirlen - 1] != '/')
+		temp[dirlen++] = '/';
+	    }
+
+	  strcpy (temp + dirlen, convfn);
+	}
+      else
+	temp = savestring (convfn);
+
+      if (convfn != dentry)
+	xfree (convfn);
+
+      return (temp);
+    }
+}
+
+/* An initial implementation of a menu completion function a la tcsh.  The
+   first time (if the last readline command was not rl_old_menu_complete), we
+   generate the list of matches.  This code is very similar to the code in
+   rl_complete_internal -- there should be a way to combine the two.  Then,
+   for each item in the list of matches, we insert the match in an undoable
+   fashion, with the appropriate character appended (this happens on the
+   second and subsequent consecutive calls to rl_old_menu_complete).  When we
+   hit the end of the match list, we restore the original unmatched text,
+   ring the bell, and reset the counter to zero. */
+int
+rl_old_menu_complete (int count, int invoking_key)
+{
+  rl_compentry_func_t *our_func;
+  int matching_filenames, found_quote;
+
+  static char *orig_text;
+  static char **matches = (char **)0;
+  static int match_list_index = 0;
+  static int match_list_size = 0;
+  static int orig_start, orig_end;
+  static char quote_char;
+  static int delimiter;
+
+  /* The first time through, we generate the list of matches and set things
+     up to insert them. */
+  if (rl_last_func != rl_old_menu_complete)
+    {
+      /* Clean up from previous call, if any. */
+      FREE (orig_text);
+      if (matches)
+	_rl_free_match_list (matches);
+
+      match_list_index = match_list_size = 0;
+      matches = (char **)NULL;
+
+      rl_completion_invoking_key = invoking_key;
+
+      RL_SETSTATE(RL_STATE_COMPLETING);
+
+      /* Only the completion entry function can change these. */
+      set_completion_defaults ('%');
+
+      our_func = rl_menu_completion_entry_function;
+      if (our_func == 0)
+	our_func = rl_completion_entry_function
+			? rl_completion_entry_function
+			: rl_filename_completion_function;
+
+      /* We now look backwards for the start of a filename/variable word. */
+      orig_end = rl_point;
+      found_quote = delimiter = 0;
+      quote_char = '\0';
+
+      if (rl_point)
+	/* This (possibly) changes rl_point.  If it returns a non-zero char,
+	   we know we have an open quote. */
+	quote_char = _rl_find_completion_word (&found_quote, &delimiter);
+
+      orig_start = rl_point;
+      rl_point = orig_end;
+
+      orig_text = rl_copy_text (orig_start, orig_end);
+      matches = gen_completion_matches (orig_text, orig_start, orig_end,
+					our_func, found_quote, quote_char);
+
+      /* If we are matching filenames, the attempted completion function will
+	 have set rl_filename_completion_desired to a non-zero value.  The basic
+	 rl_filename_completion_function does this. */
+      matching_filenames = rl_filename_completion_desired;
+
+      if (matches == 0 || postprocess_matches (&matches, matching_filenames) == 0)
+	{
+	  rl_ding ();
+	  FREE (matches);
+	  matches = (char **)0;
+	  FREE (orig_text);
+	  orig_text = (char *)0;
+	  completion_changed_buffer = 0;
+	  RL_UNSETSTATE(RL_STATE_COMPLETING);
+	  return (0);
+	}
+
+      RL_UNSETSTATE(RL_STATE_COMPLETING);
+
+      for (match_list_size = 0; matches[match_list_size]; match_list_size++)
+        ;
+      /* matches[0] is lcd if match_list_size > 1, but the circular buffer
+	 code below should take care of it. */
+
+      if (match_list_size > 1 && _rl_complete_show_all)
+	display_matches (matches);
+    }
+
+  /* Now we have the list of matches.  Replace the text between
+     rl_line_buffer[orig_start] and rl_line_buffer[rl_point] with
+     matches[match_list_index], and add any necessary closing char. */
+
+  if (matches == 0 || match_list_size == 0) 
+    {
+      rl_ding ();
+      FREE (matches);
+      matches = (char **)0;
+      completion_changed_buffer = 0;
+      return (0);
+    }
+
+  match_list_index += count;
+  if (match_list_index < 0)
+    {
+      while (match_list_index < 0)
+	match_list_index += match_list_size;
+    }
+  else
+    match_list_index %= match_list_size;
+
+  if (match_list_index == 0 && match_list_size > 1)
+    {
+      rl_ding ();
+      insert_match (orig_text, orig_start, MULT_MATCH, &quote_char);
+    }
+  else
+    {
+      insert_match (matches[match_list_index], orig_start, SINGLE_MATCH, &quote_char);
+      append_to_match (matches[match_list_index], delimiter, quote_char,
+		       compare_match (orig_text, matches[match_list_index]));
+    }
+
+  completion_changed_buffer = 1;
+  return (0);
+}
+
+/* The current version of menu completion.
+   The differences between this function and the original are:
+
+1. It honors the maximum number of completions variable (completion-query-items)
+2. It appends to the word as usual if there is only one match
+3. It displays the common prefix if there is one, and makes it the first menu
+   choice if the menu-complete-display-prefix option is enabled
+*/
+ 
+int
+rl_menu_complete (int count, int ignore)
+{
+  rl_compentry_func_t *our_func;
+  int matching_filenames, found_quote;
+
+  static char *orig_text;
+  static char **matches = (char **)0;
+  static int match_list_index = 0;
+  static int match_list_size = 0;
+  static int nontrivial_lcd = 0;
+  static int full_completion = 0;	/* set to 1 if menu completion should reinitialize on next call */
+  static int orig_start, orig_end;
+  static char quote_char;
+  static int delimiter, cstate;
+
+  /* The first time through, we generate the list of matches and set things
+     up to insert them. */
+  if ((rl_last_func != rl_menu_complete && rl_last_func != rl_backward_menu_complete) || full_completion)
+    {
+      /* Clean up from previous call, if any. */
+      FREE (orig_text);
+      if (matches)
+	_rl_free_match_list (matches);
+
+      match_list_index = match_list_size = 0;
+      matches = (char **)NULL;
+
+      full_completion = 0;
+
+      RL_SETSTATE(RL_STATE_COMPLETING);
+
+      /* Only the completion entry function can change these. */
+      set_completion_defaults ('%');
+
+      our_func = rl_menu_completion_entry_function;
+      if (our_func == 0)
+	our_func = rl_completion_entry_function
+			? rl_completion_entry_function
+			: rl_filename_completion_function;
+
+      /* We now look backwards for the start of a filename/variable word. */
+      orig_end = rl_point;
+      found_quote = delimiter = 0;
+      quote_char = '\0';
+
+      if (rl_point)
+	/* This (possibly) changes rl_point.  If it returns a non-zero char,
+	   we know we have an open quote. */
+	quote_char = _rl_find_completion_word (&found_quote, &delimiter);
+
+      orig_start = rl_point;
+      rl_point = orig_end;
+
+      orig_text = rl_copy_text (orig_start, orig_end);
+      matches = gen_completion_matches (orig_text, orig_start, orig_end,
+					our_func, found_quote, quote_char);
+
+      nontrivial_lcd = matches && compare_match (orig_text, matches[0]) != 0;
+
+      /* If we are matching filenames, the attempted completion function will
+	 have set rl_filename_completion_desired to a non-zero value.  The basic
+	 rl_filename_completion_function does this. */
+      matching_filenames = rl_filename_completion_desired;
+
+      if (matches == 0 || postprocess_matches (&matches, matching_filenames) == 0)
+	{
+	  rl_ding ();
+	  FREE (matches);
+	  matches = (char **)0;
+	  FREE (orig_text);
+	  orig_text = (char *)0;
+	  completion_changed_buffer = 0;
+	  RL_UNSETSTATE(RL_STATE_COMPLETING);
+	  return (0);
+	}
+
+      RL_UNSETSTATE(RL_STATE_COMPLETING);
+
+      for (match_list_size = 0; matches[match_list_size]; match_list_size++)
+        ;
+
+      if (match_list_size == 0) 
+	{
+	  rl_ding ();
+	  FREE (matches);
+	  matches = (char **)0;
+	  match_list_index = 0;
+	  completion_changed_buffer = 0;
+	  return (0);
+        }
+
+      /* matches[0] is lcd if match_list_size > 1, but the circular buffer
+	 code below should take care of it. */
+      if (*matches[0])
+	{
+	  insert_match (matches[0], orig_start, matches[1] ? MULT_MATCH : SINGLE_MATCH, &quote_char);
+	  orig_end = orig_start + strlen (matches[0]);
+	  completion_changed_buffer = STREQ (orig_text, matches[0]) == 0;
+	}
+
+      if (match_list_size > 1 && _rl_complete_show_all)
+	{
+	  display_matches (matches);
+	  /* If there are so many matches that the user has to be asked
+	     whether or not he wants to see the matches, menu completion
+	     is unwieldy. */
+	  if (rl_completion_query_items > 0 && match_list_size >= rl_completion_query_items)
+	    {
+	      rl_ding ();
+	      FREE (matches);
+	      matches = (char **)0;
+	      full_completion = 1;
+	      return (0);
+	    }
+	  else if (_rl_menu_complete_prefix_first)
+	    {
+	      rl_ding ();
+	      return (0);
+	    }
+	}
+      else if (match_list_size <= 1)
+	{
+	  append_to_match (matches[0], delimiter, quote_char, nontrivial_lcd);
+	  full_completion = 1;
+	  return (0);
+	}
+      else if (_rl_menu_complete_prefix_first && match_list_size > 1)
+	{
+	  rl_ding ();
+	  return (0);
+	}
+    }
+
+  /* Now we have the list of matches.  Replace the text between
+     rl_line_buffer[orig_start] and rl_line_buffer[rl_point] with
+     matches[match_list_index], and add any necessary closing char. */
+
+  if (matches == 0 || match_list_size == 0) 
+    {
+      rl_ding ();
+      FREE (matches);
+      matches = (char **)0;
+      completion_changed_buffer = 0;
+      return (0);
+    }
+
+  match_list_index += count;
+  if (match_list_index < 0)
+    {
+      while (match_list_index < 0)
+	match_list_index += match_list_size;
+    }
+  else
+    match_list_index %= match_list_size;
+
+  if (match_list_index == 0 && match_list_size > 1)
+    {
+      rl_ding ();
+      insert_match (matches[0], orig_start, MULT_MATCH, &quote_char);
+    }
+  else
+    {
+      insert_match (matches[match_list_index], orig_start, SINGLE_MATCH, &quote_char);
+      append_to_match (matches[match_list_index], delimiter, quote_char,
+		       compare_match (orig_text, matches[match_list_index]));
+    }
+
+  completion_changed_buffer = 1;
+  return (0);
+}
+
+int
+rl_backward_menu_complete (int count, int key)
+{
+  /* Positive arguments to backward-menu-complete translate into negative
+     arguments for menu-complete, and vice versa. */
+  return (rl_menu_complete (-count, key));
+}
diff --git a/lib/readline/display.c b/lib/readline/display.c
new file mode 100644
index 0000000..38b3d0e
--- /dev/null
+++ b/lib/readline/display.c
@@ -0,0 +1,3557 @@
+/* display.c -- readline redisplay facility. */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library    
+   for reading lines of text with interactive input and history editing.
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <sys/types.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif /* HAVE_UNISTD_H */
+
+#include "posixstat.h"
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#include <stdio.h>
+
+#ifdef __MSDOS__
+#  include <pc.h>
+#endif
+
+/* System-specific feature definitions and include files. */
+#include "rldefs.h"
+#include "rlmbutil.h"
+
+/* Termcap library stuff. */
+#include "tcap.h"
+
+/* Some standard library routines. */
+#include "readline.h"
+#include "history.h"
+
+#include "rlprivate.h"
+#include "xmalloc.h"
+
+#if !defined (strchr) && !defined (__STDC__)
+extern char *strchr (), *strrchr ();
+#endif /* !strchr && !__STDC__ */
+
+static void putc_face PARAMS((int, int, char *));
+static void puts_face PARAMS((const char *, const char *, int));
+static void norm_face PARAMS((char *, int));
+
+static void update_line PARAMS((char *, char *, char *, char *, int, int, int, int));
+static void space_to_eol PARAMS((int));
+static void delete_chars PARAMS((int));
+static void insert_some_chars PARAMS((char *, int, int));
+static void open_some_spaces PARAMS((int));
+static void cr PARAMS((void));
+static void redraw_prompt PARAMS((char *));
+static void _rl_move_cursor_relative PARAMS((int, const char *, const char *));
+
+/* Values for FLAGS */
+#define PMT_MULTILINE	0x01
+
+static char *expand_prompt PARAMS((char *, int, int *, int *, int *, int *));
+
+#define DEFAULT_LINE_BUFFER_SIZE	1024
+
+/* State of visible and invisible lines. */
+struct line_state
+  {
+    char *line;
+    char *lface;
+    int *lbreaks;
+    int lbsize;
+#if defined (HANDLE_MULTIBYTE)
+    int wbsize;
+    int *wrapped_line;
+#endif
+  };
+
+/* The line display buffers.  One is the line currently displayed on
+   the screen.  The other is the line about to be displayed. */
+static struct line_state line_state_array[2];
+static struct line_state *line_state_visible = &line_state_array[0];
+static struct line_state *line_state_invisible = &line_state_array[1];
+static int line_structures_initialized = 0;
+
+/* Backwards-compatible names. */
+#define inv_lbreaks	(line_state_invisible->lbreaks)
+#define inv_lbsize	(line_state_invisible->lbsize)
+#define vis_lbreaks	(line_state_visible->lbreaks)
+#define vis_lbsize	(line_state_visible->lbsize)
+
+#define visible_line	(line_state_visible->line)
+#define vis_face	(line_state_visible->lface)
+#define invisible_line	(line_state_invisible->line)
+#define inv_face	(line_state_invisible->lface)
+
+#if defined (HANDLE_MULTIBYTE)
+static int _rl_col_width PARAMS((const char *, int, int, int));
+#else
+#  define _rl_col_width(l, s, e, f)	(((e) <= (s)) ? 0 : (e) - (s))
+#endif
+
+/* Heuristic used to decide whether it is faster to move from CUR to NEW
+   by backing up or outputting a carriage return and moving forward.  CUR
+   and NEW are either both buffer positions or absolute screen positions. */
+#define CR_FASTER(new, cur) (((new) + 1) < ((cur) - (new)))
+
+/* _rl_last_c_pos is an absolute cursor position in multibyte locales and a
+   buffer index in others.  This macro is used when deciding whether the
+   current cursor position is in the middle of a prompt string containing
+   invisible characters.  XXX - might need to take `modmark' into account. */
+/* XXX - only valid when tested against _rl_last_c_pos; buffer indices need
+   to use prompt_last_invisible directly. */
+#define PROMPT_ENDING_INDEX \
+  ((MB_CUR_MAX > 1 && rl_byte_oriented == 0) ? prompt_physical_chars : prompt_last_invisible+1)
+
+#define FACE_NORMAL	'0'
+#define FACE_STANDOUT	'1'
+#define FACE_INVALID	((char)1)
+  
+/* **************************************************************** */
+/*								    */
+/*			Display stuff				    */
+/*								    */
+/* **************************************************************** */
+
+/* This is the stuff that is hard for me.  I never seem to write good
+   display routines in C.  Let's see how I do this time. */
+
+/* (PWP) Well... Good for a simple line updater, but totally ignores
+   the problems of input lines longer than the screen width.
+
+   update_line and the code that calls it makes a multiple line,
+   automatically wrapping line update.  Careful attention needs
+   to be paid to the vertical position variables. */
+
+/* Keep two buffers; one which reflects the current contents of the
+   screen, and the other to draw what we think the new contents should
+   be.  Then compare the buffers, and make whatever changes to the
+   screen itself that we should.  Finally, make the buffer that we
+   just drew into be the one which reflects the current contents of the
+   screen, and place the cursor where it belongs.
+
+   Commands that want to can fix the display themselves, and then let
+   this function know that the display has been fixed by setting the
+   RL_DISPLAY_FIXED variable.  This is good for efficiency. */
+
+/* Application-specific redisplay function. */
+rl_voidfunc_t *rl_redisplay_function = rl_redisplay;
+
+/* Global variables declared here. */
+/* What YOU turn on when you have handled all redisplay yourself. */
+int rl_display_fixed = 0;
+
+/* The stuff that gets printed out before the actual text of the line.
+   This is usually pointing to rl_prompt. */
+char *rl_display_prompt = (char *)NULL;
+
+/* Variables used to include the editing mode in the prompt. */
+char *_rl_emacs_mode_str;
+int _rl_emacs_modestr_len;
+
+char *_rl_vi_ins_mode_str;
+int _rl_vi_ins_modestr_len;
+
+char *_rl_vi_cmd_mode_str;
+int _rl_vi_cmd_modestr_len;
+
+/* Pseudo-global variables declared here. */
+
+/* Hints for other parts of readline to give to the display engine. */
+int _rl_suppress_redisplay = 0;
+int _rl_want_redisplay = 0;
+
+/* The visible cursor position.  If you print some text, adjust this. */
+/* NOTE: _rl_last_c_pos is used as a buffer index when not in a locale
+   supporting multibyte characters, and an absolute cursor position when
+   in such a locale.  This is an artifact of the donated multibyte support.
+   Care must be taken when modifying its value. */
+int _rl_last_c_pos = 0;
+int _rl_last_v_pos = 0;
+
+/* Number of physical lines consumed by the current line buffer currently
+  on screen minus 1. */
+int _rl_vis_botlin = 0;
+
+static int _rl_quick_redisplay = 0;
+
+/* This is a hint update_line gives to rl_redisplay that it has adjusted the
+   value of _rl_last_c_pos *and* taken the presence of any invisible chars in
+   the prompt into account.  rl_redisplay notes this and does not do the
+   adjustment itself. */
+static int cpos_adjusted;
+
+/* The index into the line buffer corresponding to the cursor position */
+static int cpos_buffer_position;
+
+/* A flag to note when we're displaying the first line of the prompt */
+static int displaying_prompt_first_line;
+/* The number of multibyte characters in the prompt, if any */
+static int prompt_multibyte_chars;
+
+static int _rl_inv_botlin = 0;
+
+/* Variables used only in this file. */
+/* The last left edge of text that was displayed.  This is used when
+   doing horizontal scrolling.  It shifts in thirds of a screenwidth. */
+static int last_lmargin;
+
+/* A buffer for `modeline' messages. */
+static char *msg_buf = 0;
+static int msg_bufsiz = 0;
+
+/* Non-zero forces the redisplay even if we thought it was unnecessary. */
+static int forced_display;
+
+/* Default and initial buffer size.  Can grow. */
+static int line_size  = 0;
+
+/* Set to a non-zero value if horizontal scrolling has been enabled
+   automatically because the terminal was resized to height 1. */
+static int horizontal_scrolling_autoset = 0;	/* explicit initialization */
+
+/* Variables to keep track of the expanded prompt string, which may
+   include invisible characters. */
+
+static char *local_prompt, *local_prompt_prefix;
+static int local_prompt_len;
+static int prompt_prefix_length;
+/* Number of chars in the buffer that contribute to visible chars on the screen.
+   This might be different from the number of physical chars in the presence
+   of multibyte characters */
+static int prompt_visible_length;
+
+/* The number of invisible characters in the line currently being
+   displayed on the screen. */
+static int visible_wrap_offset;
+
+/* The number of invisible characters in the prompt string.  Static so it
+   can be shared between rl_redisplay and update_line */
+static int wrap_offset;
+
+/* The index of the last invisible character in the prompt string. */
+static int prompt_last_invisible;
+
+/* The length (buffer offset) of the first line of the last (possibly
+   multi-line) buffer displayed on the screen. */
+static int visible_first_line_len;
+
+/* Number of invisible characters on the first physical line of the prompt.
+   Only valid when the number of physical characters in the prompt exceeds
+   (or is equal to) _rl_screenwidth. */
+static int prompt_invis_chars_first_line;
+
+static int prompt_last_screen_line;
+
+static int prompt_physical_chars;
+
+/* An array of indexes into the prompt string where we will break physical
+   screen lines.  It's easier to compute in expand_prompt and use later in
+   rl_redisplay instead of having rl_redisplay try to guess about invisible
+   characters in the prompt or use heuristics about where they are. */
+static int *local_prompt_newlines;
+
+/* set to a non-zero value by rl_redisplay if we are marking modified history
+   lines and the current line is so marked. */
+static int modmark;
+
+static int line_totbytes;
+
+/* Variables to save and restore prompt and display information. */
+
+/* These are getting numerous enough that it's time to create a struct. */
+
+static char *saved_local_prompt;
+static char *saved_local_prefix;
+static int *saved_local_prompt_newlines;
+
+static int saved_last_invisible;
+static int saved_visible_length;
+static int saved_prefix_length;
+static int saved_local_length;
+static int saved_invis_chars_first_line;
+static int saved_physical_chars;
+
+/* Return a string indicating the editing mode, for use in the prompt. */
+
+static char *
+prompt_modestr (int *lenp)
+{
+  if (rl_editing_mode == emacs_mode)
+    {
+      if (lenp)
+	*lenp = _rl_emacs_mode_str ? _rl_emacs_modestr_len : RL_EMACS_MODESTR_DEFLEN;
+      return _rl_emacs_mode_str ? _rl_emacs_mode_str : RL_EMACS_MODESTR_DEFAULT;
+    }
+  else if (_rl_keymap == vi_insertion_keymap)
+    {
+      if (lenp)
+	*lenp = _rl_vi_ins_mode_str ? _rl_vi_ins_modestr_len : RL_VI_INS_MODESTR_DEFLEN;
+      return _rl_vi_ins_mode_str ? _rl_vi_ins_mode_str : RL_VI_INS_MODESTR_DEFAULT;		/* vi insert mode */
+    }
+  else
+    {
+      if (lenp)
+	*lenp = _rl_vi_cmd_mode_str ? _rl_vi_cmd_modestr_len : RL_VI_CMD_MODESTR_DEFLEN;
+      return _rl_vi_cmd_mode_str ? _rl_vi_cmd_mode_str : RL_VI_CMD_MODESTR_DEFAULT;		/* vi command mode */
+    }
+}
+
+/* Expand the prompt string S and return the number of visible
+   characters in *LP, if LP is not null.  This is currently more-or-less
+   a placeholder for expansion.  LIP, if non-null is a place to store the
+   index of the last invisible character in the returned string. NIFLP,
+   if non-zero, is a place to store the number of invisible characters in
+   the first prompt line.  The previous are used as byte counts -- indexes
+   into a character buffer.  *VLP gets the number of physical characters in
+   the expanded prompt (visible length) */
+
+/* Current implementation:
+	\001 (^A) start non-visible characters
+	\002 (^B) end non-visible characters
+   all characters except \001 and \002 (following a \001) are copied to
+   the returned string; all characters except those between \001 and
+   \002 are assumed to be `visible'. */	
+
+/* Possible values for FLAGS:
+	PMT_MULTILINE	caller indicates that this is part of a multiline prompt
+*/
+
+/* This approximates the number of lines the prompt will take when displayed */
+#define APPROX_DIV(n, d)	(((n) < (d)) ? 1 : ((n) / (d)) + 1)
+
+static char *
+expand_prompt (char *pmt, int flags, int *lp, int *lip, int *niflp, int *vlp)
+{
+  char *r, *ret, *p, *igstart, *nprompt, *ms;
+  int l, rl, last, ignoring, ninvis, invfl, invflset, ind, pind, physchars;
+  int mlen, newlines, newlines_guess, bound;
+  int mb_cur_max;
+
+  /* We only expand the mode string for the last line of a multiline prompt
+     (a prompt with embedded newlines). */
+  ms = (((pmt == rl_prompt) ^ (flags & PMT_MULTILINE)) && _rl_show_mode_in_prompt) ? prompt_modestr (&mlen) : 0;
+  if (ms)
+    {
+      l = strlen (pmt);
+      nprompt = (char *)xmalloc (l + mlen + 1);
+      memcpy (nprompt, ms, mlen);
+      strcpy (nprompt + mlen, pmt);
+    }
+  else
+    nprompt = pmt;
+
+  mb_cur_max = MB_CUR_MAX;
+
+  if (_rl_screenwidth == 0)
+    _rl_get_screen_size (0, 0);	/* avoid division by zero */
+
+  /* Short-circuit if we can.  We can do this if we are treating the prompt as
+     a sequence of bytes and there are no invisible characters in the prompt
+     to deal with. Since we populate local_prompt_newlines, we have to run
+     through the rest of the function if this prompt looks like it's going to
+     be longer than one screen line. */
+  if ((mb_cur_max <= 1 || rl_byte_oriented) && strchr (nprompt, RL_PROMPT_START_IGNORE) == 0)
+    {
+      l = strlen (nprompt);
+      if (l < (_rl_screenwidth > 0 ? _rl_screenwidth : 80))
+        {
+	  r = (nprompt == pmt) ? savestring (pmt) : nprompt;
+	  if (lp)
+	    *lp = l;
+	  if (lip)
+	    *lip = 0;
+	  if (niflp)
+	    *niflp = 0;
+	  if (vlp)
+	    *vlp = l;
+
+	  local_prompt_newlines = (int *) xrealloc (local_prompt_newlines, sizeof (int) * 2);
+	  local_prompt_newlines[0] = 0;
+	  local_prompt_newlines[1] = -1;
+
+	  return r;
+        }
+    }
+
+  l = strlen (nprompt);			/* XXX */
+  r = ret = (char *)xmalloc (l + 1);
+
+  /* Guess at how many screen lines the prompt will take to size the array that
+     keeps track of where the line wraps happen */
+  newlines_guess = (_rl_screenwidth > 0) ? APPROX_DIV(l,  _rl_screenwidth) : APPROX_DIV(l, 80);
+  local_prompt_newlines = (int *) xrealloc (local_prompt_newlines, sizeof (int) * (newlines_guess + 1));
+  local_prompt_newlines[newlines = 0] = 0;
+  for (rl = 1; rl <= newlines_guess; rl++)
+    local_prompt_newlines[rl] = -1;
+
+  rl = physchars = 0;	/* mode string now part of nprompt */
+  invfl = 0;		/* invisible chars in first line of prompt */
+  invflset = 0;		/* we only want to set invfl once */
+  igstart = 0;		/* we're not ignoring any characters yet */
+
+  for (ignoring = last = ninvis = 0, p = nprompt; p && *p; p++)
+    {
+      /* This code strips the invisible character string markers
+	 RL_PROMPT_START_IGNORE and RL_PROMPT_END_IGNORE */
+      if (ignoring == 0 && *p == RL_PROMPT_START_IGNORE)		/* XXX - check ignoring? */
+	{
+	  ignoring = 1;
+	  igstart = p;
+	  continue;
+	}
+      else if (ignoring && *p == RL_PROMPT_END_IGNORE)
+	{
+	  ignoring = 0;
+	  if (p != (igstart + 1))
+	    last = r - ret - 1;
+	  continue;
+	}
+      else
+	{
+#if defined (HANDLE_MULTIBYTE)
+	  if (mb_cur_max > 1 && rl_byte_oriented == 0)
+	    {
+	      pind = p - nprompt;
+	      ind = _rl_find_next_mbchar (nprompt, pind, 1, MB_FIND_NONZERO);
+	      l = ind - pind;
+	      while (l--)
+	        *r++ = *p++;
+	      if (!ignoring)
+		{
+		  /* rl ends up being assigned to prompt_visible_length,
+		     which is the number of characters in the buffer that
+		     contribute to characters on the screen, which might
+		     not be the same as the number of physical characters
+		     on the screen in the presence of multibyte characters */
+		  rl += ind - pind;
+		  physchars += _rl_col_width (nprompt, pind, ind, 0);
+		}
+	      else
+		ninvis += ind - pind;
+	      p--;			/* compensate for later increment */
+	    }
+	  else
+#endif
+	    {
+	      *r++ = *p;
+	      if (!ignoring)
+		{
+		  rl++;			/* visible length byte counter */
+		  physchars++;
+		}
+	      else
+		ninvis++;		/* invisible chars byte counter */
+	    }
+
+	  if (invflset == 0 && physchars >= _rl_screenwidth)
+	    {
+	      invfl = ninvis;
+	      invflset = 1;
+	    }
+
+	  if (physchars >= (bound = (newlines + 1) * _rl_screenwidth) && local_prompt_newlines[newlines+1] == -1)
+	    {
+	      int new;
+	      if (physchars > bound)		/* should rarely happen */
+		{
+#if defined (HANDLE_MULTIBYTE)
+		  *r = '\0';	/* need null-termination for strlen */
+		  if (mb_cur_max > 1 && rl_byte_oriented == 0)
+		    new = _rl_find_prev_mbchar (ret, r - ret, MB_FIND_ANY);
+		  else
+#endif
+		    new = r - ret - (physchars - bound);	/* XXX */
+		}
+	      else
+	        new = r - ret;
+	      local_prompt_newlines[++newlines] = new;
+	    }
+	}
+    }
+
+  if (rl < _rl_screenwidth)
+    invfl = ninvis;
+
+  *r = '\0';
+  if (lp)
+    *lp = rl;
+  if (lip)
+    *lip = last;
+  if (niflp)
+    *niflp = invfl;
+  if  (vlp)
+    *vlp = physchars;
+
+  if (nprompt != pmt)
+    free (nprompt);
+
+  return ret;
+}
+
+/* Just strip out RL_PROMPT_START_IGNORE and RL_PROMPT_END_IGNORE from
+   PMT and return the rest of PMT. */
+char *
+_rl_strip_prompt (char *pmt)
+{
+  char *ret;
+
+  ret = expand_prompt (pmt, 0, (int *)NULL, (int *)NULL, (int *)NULL, (int *)NULL);
+  return ret;
+}
+
+void
+_rl_reset_prompt (void)
+{
+  rl_visible_prompt_length = rl_expand_prompt (rl_prompt);
+}
+
+/*
+ * Expand the prompt string into the various display components, if
+ * necessary.
+ *
+ * local_prompt = expanded last line of string in rl_display_prompt
+ *		  (portion after the final newline)
+ * local_prompt_prefix = portion before last newline of rl_display_prompt,
+ *			 expanded via expand_prompt
+ * prompt_visible_length = number of visible characters in local_prompt
+ * prompt_prefix_length = number of visible characters in local_prompt_prefix
+ *
+ * It also tries to keep track of the number of invisible characters in the
+ * prompt string, and where they are.
+ *
+ * This function is called once per call to readline().  It may also be
+ * called arbitrarily to expand the primary prompt.
+ *
+ * The return value is the number of visible characters on the last line
+ * of the (possibly multi-line) prompt.  In this case, multi-line means
+ * there are embedded newlines in the prompt string itself, not that the
+ * number of physical characters exceeds the screen width and the prompt
+ * wraps.
+ */
+int
+rl_expand_prompt (char *prompt)
+{
+  char *p, *t;
+  int c;
+
+  /* Clear out any saved values. */
+  FREE (local_prompt);
+  FREE (local_prompt_prefix);
+
+  local_prompt = local_prompt_prefix = (char *)0;
+  local_prompt_len = 0;
+  prompt_last_invisible = prompt_invis_chars_first_line = 0;
+  prompt_visible_length = prompt_physical_chars = 0;
+
+  if (prompt == 0 || *prompt == 0)
+    return (0);
+
+  p = strrchr (prompt, '\n');
+  if (p == 0)
+    {
+      /* The prompt is only one logical line, though it might wrap. */
+      local_prompt = expand_prompt (prompt, 0, &prompt_visible_length,
+					       &prompt_last_invisible,
+					       &prompt_invis_chars_first_line,
+					       &prompt_physical_chars);
+      local_prompt_prefix = (char *)0;
+      local_prompt_len = local_prompt ? strlen (local_prompt) : 0;
+      return (prompt_visible_length);
+    }
+  else
+    {
+      /* The prompt spans multiple lines. */
+      t = ++p;
+      c = *t; *t = '\0';
+      /* The portion of the prompt string up to and including the
+	 final newline is now null-terminated. */
+      local_prompt_prefix = expand_prompt (prompt, PMT_MULTILINE,
+						   &prompt_prefix_length,
+						   (int *)NULL,
+						   (int *)NULL,
+						   (int *)NULL);
+      *t = c;
+
+      local_prompt = expand_prompt (p, PMT_MULTILINE,
+				       &prompt_visible_length,
+				       &prompt_last_invisible,
+				       &prompt_invis_chars_first_line,
+				       &prompt_physical_chars);
+      local_prompt_len = local_prompt ? strlen (local_prompt) : 0;
+      return (prompt_prefix_length);
+    }
+}
+
+/* Allocate the various line structures, making sure they can hold MINSIZE
+   bytes. If the existing line size can accommodate MINSIZE bytes, don't do
+   anything. */
+static void
+realloc_line (int minsize)
+{
+  int minimum_size;
+  int newsize, delta;
+
+  minimum_size = DEFAULT_LINE_BUFFER_SIZE;
+  if (minsize < minimum_size)
+    minsize = minimum_size;
+  if (minsize <= _rl_screenwidth)	/* XXX - for gdb */
+    minsize = _rl_screenwidth + 1;
+  if (line_size >= minsize)
+    return;
+
+  newsize = minimum_size;
+  while (newsize < minsize)
+    newsize *= 2;
+
+  visible_line = (char *)xrealloc (visible_line, newsize);
+  vis_face = (char *)xrealloc (vis_face, newsize);
+
+  invisible_line = (char *)xrealloc (invisible_line, newsize);
+  inv_face = (char *)xrealloc (inv_face, newsize);
+
+  delta = newsize - line_size;  
+  memset (visible_line + line_size, 0, delta);
+  memset (vis_face + line_size, FACE_NORMAL, delta);
+  memset (invisible_line + line_size, 1, delta);
+  memset (inv_face + line_size, FACE_INVALID, delta);
+
+  line_size = newsize;
+}
+
+/* Initialize the VISIBLE_LINE and INVISIBLE_LINE arrays, and their associated
+   arrays of line break markers.  MINSIZE is the minimum size of VISIBLE_LINE
+   and INVISIBLE_LINE; if it is greater than LINE_SIZE, LINE_SIZE is
+   increased.  If the lines have already been allocated, this ensures that
+   they can hold at least MINSIZE characters. */
+static void
+init_line_structures (int minsize)
+{
+  if (invisible_line == 0)	/* initialize it */
+    {
+      if (line_size > minsize)
+	minsize = line_size;
+    }
+   realloc_line (minsize); 
+
+  if (vis_lbreaks == 0)
+    {
+      /* should be enough. */
+      inv_lbsize = vis_lbsize = 256;
+
+#if defined (HANDLE_MULTIBYTE)
+      line_state_visible->wbsize = vis_lbsize;
+      line_state_visible->wrapped_line = (int *)xmalloc (line_state_visible->wbsize * sizeof (int));
+
+      line_state_invisible->wbsize = inv_lbsize;
+      line_state_invisible->wrapped_line = (int *)xmalloc (line_state_invisible->wbsize * sizeof (int));
+#endif
+
+      inv_lbreaks = (int *)xmalloc (inv_lbsize * sizeof (int));
+      vis_lbreaks = (int *)xmalloc (vis_lbsize * sizeof (int));
+      inv_lbreaks[0] = vis_lbreaks[0] = 0;
+    }
+
+  line_structures_initialized = 1;
+}
+
+/* Convenience functions to add chars to the invisible line that update the
+   face information at the same time. */
+static void		/* XXX - change this */
+invis_addc (int *outp, char c, char face)
+{
+  realloc_line (*outp + 1);
+  invisible_line[*outp] = c;
+  inv_face[*outp] = face;
+  *outp += 1;
+}
+
+static void
+invis_adds (int *outp, const char *str, int n, char face)
+{
+  int i;
+
+  for (i = 0; i < n; i++)
+    invis_addc (outp, str[i], face);
+}
+
+static void
+invis_nul (int *outp)
+{
+  invis_addc (outp, '\0', 0);
+  *outp -= 1;
+}
+
+static void
+set_active_region (int *beg, int *end)
+{
+  if (rl_point >= 0 && rl_point <= rl_end && rl_mark >= 0 && rl_mark <= rl_end)
+    {
+      *beg = (rl_mark < rl_point) ? rl_mark : rl_point;
+      *end = (rl_mark < rl_point) ? rl_point : rl_mark;
+    }
+}
+
+/* Do whatever tests are necessary and tell update_line that it can do a
+   quick, dumb redisplay on the assumption that there are so many
+   differences between the old and new lines that it would be a waste to
+   compute all the differences.
+   Right now, it just sets _rl_quick_redisplay if the current visible line
+   is a single line (so we don't have to move vertically or mess with line
+   wrapping). */
+void
+_rl_optimize_redisplay (void)
+{
+  if (_rl_vis_botlin == 0)
+    _rl_quick_redisplay = 1;
+}  
+
+/* Basic redisplay algorithm.  See comments inline. */
+void
+rl_redisplay (void)
+{
+  int in, out, c, linenum, cursor_linenum;
+  int inv_botlin, lb_botlin, lb_linenum, o_cpos;
+  int newlines, lpos, temp, n0, num, prompt_lines_estimate;
+  char *prompt_this_line;
+  char cur_face;
+  int hl_begin, hl_end;
+  int mb_cur_max = MB_CUR_MAX;
+#if defined (HANDLE_MULTIBYTE)
+  wchar_t wc;
+  size_t wc_bytes;
+  int wc_width;
+  mbstate_t ps;
+  int _rl_wrapped_multicolumn = 0;
+#endif
+
+  if (_rl_echoing_p == 0)
+    return;
+
+  /* Block keyboard interrupts because this function manipulates global
+     data structures. */
+  _rl_block_sigint ();  
+  RL_SETSTATE (RL_STATE_REDISPLAYING);
+
+  cur_face = FACE_NORMAL;
+  /* Can turn this into an array for multiple highlighted objects in addition
+     to the region */
+  hl_begin = hl_end = -1;
+
+  if (rl_mark_active_p ())
+    set_active_region (&hl_begin, &hl_end);
+
+  if (!rl_display_prompt)
+    rl_display_prompt = "";
+
+  if (line_structures_initialized == 0)
+    {
+      init_line_structures (0);
+      rl_on_new_line ();
+    }
+  else if (line_size <= _rl_screenwidth)
+    init_line_structures (_rl_screenwidth + 1);
+
+  /* Enable horizontal scrolling automatically for terminals of height 1
+     where wrapping lines doesn't work. Disable it as soon as the terminal
+     height is increased again if it was automatically enabled. */
+  if (_rl_screenheight <= 1)
+    {
+      if (_rl_horizontal_scroll_mode == 0)
+	 horizontal_scrolling_autoset = 1;
+      _rl_horizontal_scroll_mode = 1;
+    }
+  else if (horizontal_scrolling_autoset)
+    _rl_horizontal_scroll_mode = 0;
+
+  /* Draw the line into the buffer. */
+  cpos_buffer_position = -1;
+
+  prompt_multibyte_chars = prompt_visible_length - prompt_physical_chars;
+
+  out = inv_botlin = 0;
+
+  /* Mark the line as modified or not.  We only do this for history
+     lines. */
+  modmark = 0;
+  if (_rl_mark_modified_lines && current_history () && rl_undo_list)
+    {
+      invis_addc (&out, '*', cur_face);
+      invis_nul (&out);
+      modmark = 1;
+    }
+
+  /* If someone thought that the redisplay was handled, but the currently
+     visible line has a different modification state than the one about
+     to become visible, then correct the caller's misconception. */
+  if (visible_line[0] != invisible_line[0])
+    rl_display_fixed = 0;
+
+  /* If the prompt to be displayed is the `primary' readline prompt (the
+     one passed to readline()), use the values we have already expanded.
+     If not, use what's already in rl_display_prompt.  WRAP_OFFSET is the
+     number of non-visible characters (bytes) in the prompt string. */
+  /* This is where we output the characters in the prompt before the last
+     newline, if any.  If there aren't any embedded newlines, we don't
+     write anything. Copy the last line of the prompt string into the line in
+     any case */
+  if (rl_display_prompt == rl_prompt || local_prompt)
+    {
+      if (local_prompt_prefix && forced_display)
+	_rl_output_some_chars (local_prompt_prefix, strlen (local_prompt_prefix));
+
+      if (local_prompt_len > 0)
+	invis_adds (&out, local_prompt, local_prompt_len, cur_face);
+      invis_nul (&out);
+      wrap_offset = local_prompt_len - prompt_visible_length;
+    }
+  else
+    {
+      int pmtlen;
+      prompt_this_line = strrchr (rl_display_prompt, '\n');
+      if (!prompt_this_line)
+	prompt_this_line = rl_display_prompt;
+      else
+	{
+	  prompt_this_line++;
+	  pmtlen = prompt_this_line - rl_display_prompt;	/* temp var */
+	  if (forced_display)
+	    {
+	      _rl_output_some_chars (rl_display_prompt, pmtlen);
+	      /* Make sure we are at column zero even after a newline,
+		 regardless of the state of terminal output processing. */
+	      if (pmtlen < 2 || prompt_this_line[-2] != '\r')
+		cr ();
+	    }
+	}
+
+      prompt_physical_chars = pmtlen = strlen (prompt_this_line);	/* XXX */
+      invis_adds (&out, prompt_this_line, pmtlen, cur_face);
+      invis_nul (&out);
+      wrap_offset = prompt_invis_chars_first_line = 0;
+    }
+
+#if defined (HANDLE_MULTIBYTE)
+#define CHECK_INV_LBREAKS() \
+      do { \
+	if (newlines >= (inv_lbsize - 2)) \
+	  { \
+	    inv_lbsize *= 2; \
+	    inv_lbreaks = (int *)xrealloc (inv_lbreaks, inv_lbsize * sizeof (int)); \
+	  } \
+	if (newlines >= (line_state_invisible->wbsize - 2)) \
+	  { \
+	    line_state_invisible->wbsize *= 2; \
+	    line_state_invisible->wrapped_line = (int *)xrealloc (line_state_invisible->wrapped_line, line_state_invisible->wbsize * sizeof(int)); \
+	  } \
+      } while (0)
+#else
+#define CHECK_INV_LBREAKS() \
+      do { \
+	if (newlines >= (inv_lbsize - 2)) \
+	  { \
+	    inv_lbsize *= 2; \
+	    inv_lbreaks = (int *)xrealloc (inv_lbreaks, inv_lbsize * sizeof (int)); \
+	  } \
+      } while (0)
+#endif /* !HANDLE_MULTIBYTE */
+
+#if defined (HANDLE_MULTIBYTE)	  
+#define CHECK_LPOS() \
+      do { \
+	lpos++; \
+	if (lpos >= _rl_screenwidth) \
+	  { \
+	    if (newlines >= (inv_lbsize - 2)) \
+	      { \
+		inv_lbsize *= 2; \
+		inv_lbreaks = (int *)xrealloc (inv_lbreaks, inv_lbsize * sizeof (int)); \
+	      } \
+	    inv_lbreaks[++newlines] = out; \
+	    if (newlines >= (line_state_invisible->wbsize - 2)) \
+	      { \
+		line_state_invisible->wbsize *= 2; \
+		line_state_invisible->wrapped_line = (int *)xrealloc (line_state_invisible->wrapped_line, line_state_invisible->wbsize * sizeof(int)); \
+	      } \
+	    line_state_invisible->wrapped_line[newlines] = _rl_wrapped_multicolumn; \
+	    lpos = 0; \
+	  } \
+      } while (0)
+#else
+#define CHECK_LPOS() \
+      do { \
+	lpos++; \
+	if (lpos >= _rl_screenwidth) \
+	  { \
+	    if (newlines >= (inv_lbsize - 2)) \
+	      { \
+		inv_lbsize *= 2; \
+		inv_lbreaks = (int *)xrealloc (inv_lbreaks, inv_lbsize * sizeof (int)); \
+	      } \
+	    inv_lbreaks[++newlines] = out; \
+	    lpos = 0; \
+	  } \
+      } while (0)
+#endif
+
+  /* inv_lbreaks[i] is where line i starts in the buffer. */
+  inv_lbreaks[newlines = 0] = 0;
+  /* lpos is a physical cursor position, so it needs to be adjusted by the
+     number of invisible characters in the prompt, per line.  We compute
+     the line breaks in the prompt string in expand_prompt, taking invisible
+     characters into account, and if lpos exceeds the screen width, we copy
+     the data in the loop below. */
+  lpos = prompt_physical_chars + modmark;
+
+#if defined (HANDLE_MULTIBYTE)
+  memset (line_state_invisible->wrapped_line, 0, line_state_invisible->wbsize * sizeof (int));
+  num = 0;
+#endif
+
+  /* prompt_invis_chars_first_line is the number of invisible characters (bytes)
+     in the first physical line of the prompt.
+     wrap_offset - prompt_invis_chars_first_line is usually the number of
+     invis chars on the second (or, more generally, last) line. */
+
+  /* This is zero-based, used to set the newlines */
+  prompt_lines_estimate = lpos / _rl_screenwidth;
+
+  /* what if lpos is already >= _rl_screenwidth before we start drawing the
+     contents of the command line? */
+  if (lpos >= _rl_screenwidth)
+    {
+      temp = 0;
+
+      /* first copy the linebreaks array we computed in expand_prompt */
+      while (local_prompt_newlines[newlines+1] != -1)
+	{
+	  temp = local_prompt_newlines[newlines+1];
+	  inv_lbreaks[++newlines] = temp;
+	}  
+
+      /* Now set lpos from the last newline */
+      if (mb_cur_max > 1 && rl_byte_oriented == 0 && prompt_multibyte_chars > 0)
+        lpos = _rl_col_width (local_prompt, temp, local_prompt_len, 1) - (wrap_offset - prompt_invis_chars_first_line);
+      else
+        lpos -= (_rl_screenwidth * newlines);
+    }
+
+  prompt_last_screen_line = newlines;
+
+  /* Draw the rest of the line (after the prompt) into invisible_line, keeping
+     track of where the cursor is (cpos_buffer_position), the number of the
+     line containing the cursor (lb_linenum), the last line number (lb_botlin
+     and inv_botlin).
+     It maintains an array of line breaks for display (inv_lbreaks).
+     This handles expanding tabs for display and displaying meta characters. */
+  lb_linenum = 0;
+#if defined (HANDLE_MULTIBYTE)
+  in = 0;
+  if (mb_cur_max > 1 && rl_byte_oriented == 0)
+    {
+      memset (&ps, 0, sizeof (mbstate_t));
+      if (_rl_utf8locale && UTF8_SINGLEBYTE(rl_line_buffer[0]))
+	{
+	  wc = (wchar_t)rl_line_buffer[0];
+	  wc_bytes = 1;
+	}
+      else
+	wc_bytes = mbrtowc (&wc, rl_line_buffer, rl_end, &ps);
+    }
+  else
+    wc_bytes = 1;
+  while (in < rl_end)
+#else
+  for (in = 0; in < rl_end; in++)
+#endif
+    {
+      if (in == hl_begin)
+	cur_face = FACE_STANDOUT;
+      else if (in == hl_end)
+	cur_face = FACE_NORMAL;
+
+      c = (unsigned char)rl_line_buffer[in];
+
+#if defined (HANDLE_MULTIBYTE)
+      if (mb_cur_max > 1 && rl_byte_oriented == 0)
+	{
+	  if (MB_INVALIDCH (wc_bytes))
+	    {
+	      /* Byte sequence is invalid or shortened.  Assume that the
+	         first byte represents a character. */
+	      wc_bytes = 1;
+	      /* Assume that a character occupies a single column. */
+	      wc_width = 1;
+	      memset (&ps, 0, sizeof (mbstate_t));
+	    }
+	  else if (MB_NULLWCH (wc_bytes))
+	    break;			/* Found '\0' */
+	  else
+	    {
+	      temp = WCWIDTH (wc);
+	      wc_width = (temp >= 0) ? temp : 1;
+	    }
+	}
+#endif
+
+      if (in == rl_point)
+	{
+	  cpos_buffer_position = out;
+	  lb_linenum = newlines;
+	}
+
+#if defined (HANDLE_MULTIBYTE)
+      if (META_CHAR (c) && _rl_output_meta_chars == 0)	/* XXX - clean up */
+#else
+      if (META_CHAR (c))
+#endif
+	{
+	  if (_rl_output_meta_chars == 0)
+	    {
+	      char obuf[5];
+	      int olen;
+
+	      olen = sprintf (obuf, "\\%o", c);
+	  
+	      if (lpos + olen >= _rl_screenwidth)
+		{
+		  temp = _rl_screenwidth - lpos;
+		  CHECK_INV_LBREAKS ();
+		  inv_lbreaks[++newlines] = out + temp;
+#if defined (HANDLE_MULTIBYTE)
+		  line_state_invisible->wrapped_line[newlines] = _rl_wrapped_multicolumn;
+#endif
+		  lpos = olen - temp;
+		}
+	      else
+		lpos += olen;
+
+	      for (temp = 0; temp < olen; temp++)
+		{
+		  invis_addc (&out, obuf[temp], cur_face);
+		  CHECK_LPOS ();
+		}
+	    }
+	  else
+	    {
+	      invis_addc (&out, c, cur_face);
+	      CHECK_LPOS();
+	    }
+	}
+#if defined (DISPLAY_TABS)
+      else if (c == '\t')
+	{
+	  register int newout;
+
+	  newout = out + 8 - lpos % 8;
+	  temp = newout - out;
+	  if (lpos + temp >= _rl_screenwidth)
+	    {
+	      register int temp2;
+	      temp2 = _rl_screenwidth - lpos;
+	      CHECK_INV_LBREAKS ();
+	      inv_lbreaks[++newlines] = out + temp2;
+#if defined (HANDLE_MULTIBYTE)
+	      line_state_invisible->wrapped_line[newlines] = _rl_wrapped_multicolumn;
+#endif
+	      lpos = temp - temp2;
+	      while (out < newout)
+		invis_addc (&out, ' ', cur_face);
+	    }
+	  else
+	    {
+	      while (out < newout)
+		invis_addc (&out, ' ', cur_face);
+	      lpos += temp;
+	    }
+	}
+#endif
+      else if (c == '\n' && _rl_horizontal_scroll_mode == 0 && _rl_term_up && *_rl_term_up)
+	{
+	  invis_addc (&out, '\0', cur_face);
+	  CHECK_INV_LBREAKS ();
+	  inv_lbreaks[++newlines] = out;
+#if defined (HANDLE_MULTIBYTE)
+	  line_state_invisible->wrapped_line[newlines] = _rl_wrapped_multicolumn;
+#endif
+	  lpos = 0;
+	}
+      else if (CTRL_CHAR (c) || c == RUBOUT)
+	{
+	  invis_addc (&out, '^', cur_face);
+	  CHECK_LPOS();
+	  invis_addc (&out, CTRL_CHAR (c) ? UNCTRL (c) : '?', cur_face);
+	  CHECK_LPOS();
+	}
+      else
+	{
+#if defined (HANDLE_MULTIBYTE)
+	  if (mb_cur_max > 1 && rl_byte_oriented == 0)
+	    {
+	      register int i;
+
+	      _rl_wrapped_multicolumn = 0;
+
+	      if (_rl_screenwidth < lpos + wc_width)
+		for (i = lpos; i < _rl_screenwidth; i++)
+		  {
+		    /* The space will be removed in update_line() */
+		    invis_addc (&out, ' ', cur_face);
+		    _rl_wrapped_multicolumn++;
+		    CHECK_LPOS();
+		  }
+	      if (in == rl_point)
+		{
+		  cpos_buffer_position = out;
+		  lb_linenum = newlines;
+		}
+	      for (i = in; i < in+wc_bytes; i++)
+		invis_addc (&out, rl_line_buffer[i], cur_face);
+	      for (i = 0; i < wc_width; i++)
+		CHECK_LPOS();
+	    }
+	  else
+	    {
+	      invis_addc (&out, c, cur_face);
+	      CHECK_LPOS();
+	    }
+#else
+	  invis_addc (&out, c, cur_face);
+	  CHECK_LPOS();
+#endif
+	}
+
+#if defined (HANDLE_MULTIBYTE)
+      if (mb_cur_max > 1 && rl_byte_oriented == 0)
+	{
+	  in += wc_bytes;
+	  if (_rl_utf8locale && UTF8_SINGLEBYTE(rl_line_buffer[in]))
+	    {
+	      wc = (wchar_t)rl_line_buffer[in];
+	      wc_bytes = 1;
+	      memset (&ps, 0, sizeof (mbstate_t));	/* re-init state */
+	    }
+	  else
+	    wc_bytes = mbrtowc (&wc, rl_line_buffer + in, rl_end - in, &ps);
+	}
+      else
+        in++;
+#endif
+    }
+  invis_nul (&out);
+  line_totbytes = out;
+  if (cpos_buffer_position < 0)
+    {
+      cpos_buffer_position = out;
+      lb_linenum = newlines;
+    }
+
+  /* If we are switching from one line to multiple wrapped lines, we don't
+     want to do a dumb update (or we want to make it smarter). */
+  if (_rl_quick_redisplay && newlines > 0)
+    _rl_quick_redisplay = 0;
+
+  inv_botlin = lb_botlin = _rl_inv_botlin = newlines;
+  CHECK_INV_LBREAKS ();
+  inv_lbreaks[newlines+1] = out;
+#if defined (HANDLE_MULTIBYTE)
+  /* This should be 0 anyway */
+  line_state_invisible->wrapped_line[newlines+1] = _rl_wrapped_multicolumn;
+#endif
+  cursor_linenum = lb_linenum;
+
+  /* CPOS_BUFFER_POSITION == position in buffer where cursor should be placed.
+     CURSOR_LINENUM == line number where the cursor should be placed. */
+
+  /* PWP: now is when things get a bit hairy.  The visible and invisible
+     line buffers are really multiple lines, which would wrap every
+     (screenwidth - 1) characters.  Go through each in turn, finding
+     the changed region and updating it.  The line order is top to bottom. */
+
+  /* If we can move the cursor up and down, then use multiple lines,
+     otherwise, let long lines display in a single terminal line, and
+     horizontally scroll it. */
+  displaying_prompt_first_line = 1;
+  if (_rl_horizontal_scroll_mode == 0 && _rl_term_up && *_rl_term_up)
+    {
+      int nleft, pos, changed_screen_line, tx;
+
+      if (!rl_display_fixed || forced_display)
+	{
+	  forced_display = 0;
+
+	  /* If we have more than a screenful of material to display, then
+	     only display a screenful.  We should display the last screen,
+	     not the first.  */
+	  if (out >= _rl_screenchars)
+	    {
+#if defined (HANDLE_MULTIBYTE)
+	      if (mb_cur_max > 1 && rl_byte_oriented == 0)
+		out = _rl_find_prev_mbchar (invisible_line, _rl_screenchars, MB_FIND_ANY);
+	      else
+#endif
+		out = _rl_screenchars - 1;
+	    }
+
+	  /* The first line is at character position 0 in the buffer.  The
+	     second and subsequent lines start at inv_lbreaks[N], offset by
+	     OFFSET (which has already been calculated above).  */
+
+#define INVIS_FIRST()	(prompt_physical_chars > _rl_screenwidth ? prompt_invis_chars_first_line : wrap_offset)
+#define WRAP_OFFSET(line, offset)  ((line == 0) \
+					? (offset ? INVIS_FIRST() : 0) \
+					: ((line == prompt_last_screen_line) ? wrap_offset-prompt_invis_chars_first_line : 0))
+#define W_OFFSET(line, offset) ((line) == 0 ? offset : 0)
+#define VIS_LLEN(l)	((l) > _rl_vis_botlin ? 0 : (vis_lbreaks[l+1] - vis_lbreaks[l]))
+#define INV_LLEN(l)	(inv_lbreaks[l+1] - inv_lbreaks[l])
+#define VIS_CHARS(line) (visible_line + vis_lbreaks[line])
+#define VIS_FACE(line) (vis_face + vis_lbreaks[line])
+#define VIS_LINE(line) ((line) > _rl_vis_botlin) ? "" : VIS_CHARS(line)
+#define VIS_LINE_FACE(line) ((line) > _rl_vis_botlin) ? "" : VIS_FACE(line)
+#define INV_LINE(line) (invisible_line + inv_lbreaks[line])
+#define INV_LINE_FACE(line) (inv_face + inv_lbreaks[line])
+
+#define OLD_CPOS_IN_PROMPT() (cpos_adjusted == 0 && \
+			_rl_last_c_pos != o_cpos && \
+			_rl_last_c_pos > wrap_offset && \
+			o_cpos < prompt_last_invisible)
+
+
+	  /* We don't want to highlight anything that's going to be off the top
+	     of the display; if the current line takes up more than an entire
+	    screen, just mark the lines that won't be displayed as having a
+	    `normal' face.
+	    It's imperfect, but better than display corruption. */
+	  if (rl_mark_active_p () && inv_botlin > _rl_screenheight)
+	    {
+	      int extra;
+
+	      extra = inv_botlin - _rl_screenheight;
+	      for (linenum = 0; linenum <= extra; linenum++)
+		norm_face (INV_LINE_FACE(linenum), INV_LLEN (linenum));
+	    }
+
+	  /* For each line in the buffer, do the updating display. */
+	  for (linenum = 0; linenum <= inv_botlin; linenum++)
+	    {
+	      /* This can lead us astray if we execute a program that changes
+		 the locale from a non-multibyte to a multibyte one. */
+	      o_cpos = _rl_last_c_pos;
+	      cpos_adjusted = 0;
+	      update_line (VIS_LINE(linenum), VIS_LINE_FACE(linenum),
+			   INV_LINE(linenum), INV_LINE_FACE(linenum),
+			   linenum,
+			   VIS_LLEN(linenum), INV_LLEN(linenum), inv_botlin);
+
+	      /* update_line potentially changes _rl_last_c_pos, but doesn't
+		 take invisible characters into account, since _rl_last_c_pos
+		 is an absolute cursor position in a multibyte locale.  We
+		 choose to (mostly) compensate for that here, rather than
+		 change update_line itself.  There are several cases in which
+		 update_line adjusts _rl_last_c_pos itself (so it can pass
+		 _rl_move_cursor_relative accurate values); it communicates
+		 this back by setting cpos_adjusted.  If we assume that
+		 _rl_last_c_pos is correct (an absolute cursor position) each
+		 time update_line is called, then we can assume in our
+		 calculations that o_cpos does not need to be adjusted by
+		 wrap_offset. */
+	      if (linenum == 0 && (mb_cur_max > 1 && rl_byte_oriented == 0) && OLD_CPOS_IN_PROMPT())
+		_rl_last_c_pos -= prompt_invis_chars_first_line;	/* XXX - was wrap_offset */
+	      else if (cpos_adjusted == 0 &&
+			linenum == prompt_last_screen_line &&
+			prompt_physical_chars > _rl_screenwidth &&
+			(mb_cur_max > 1 && rl_byte_oriented == 0) &&
+			_rl_last_c_pos != o_cpos &&
+			_rl_last_c_pos > (prompt_last_invisible - _rl_screenwidth - prompt_invis_chars_first_line))	/* XXX - rethink this last one */
+		/* This assumes that all the invisible characters are split
+		   between the first and last lines of the prompt, if the 
+		   prompt consumes more than two lines. It's usually right */
+		/* XXX - not sure this is ever executed */
+		_rl_last_c_pos -= (wrap_offset-prompt_invis_chars_first_line);
+
+	      /* If this is the line with the prompt, we might need to
+		 compensate for invisible characters in the new line. Do
+		 this only if there is not more than one new line (which
+		 implies that we completely overwrite the old visible line)
+		 and the new line is shorter than the old.  Make sure we are
+		 at the end of the new line before clearing. */
+	      if (linenum == 0 &&
+		  inv_botlin == 0 && _rl_last_c_pos == out &&
+		  (wrap_offset > visible_wrap_offset) &&
+		  (_rl_last_c_pos < visible_first_line_len))
+		{
+		  if (mb_cur_max > 1 && rl_byte_oriented == 0)
+		    nleft = _rl_screenwidth - _rl_last_c_pos;
+		  else
+		    nleft = _rl_screenwidth + wrap_offset - _rl_last_c_pos;
+		  if (nleft)
+		    _rl_clear_to_eol (nleft);
+		}
+#if 0
+	      /* This segment is intended to handle the case where the old
+		 visible prompt has invisible characters and the new line
+		 to be displayed needs to clear the rest of the old characters
+		 out (e.g., when printing the i-search prompt): in general,
+		 the case of the new line being shorter than the old.  We need
+		 to be at the end of the new line and the old line needs to be
+		 longer than the current cursor position. It's not perfect,
+		 since it uses the byte length of the first line, but this will
+		 at worst result in some extra clear-to-end-of-lines. We can't
+		 use the prompt length variables because they may not
+		 correspond to the visible line (see printing the i-search
+		 prompt above). The tests for differing numbers of invisible
+		 characters may not matter and can probably be removed. */
+	      else if (linenum == 0 &&
+		       linenum == prompt_last_screen_line &&
+		       _rl_last_c_pos == out &&
+		       _rl_last_c_pos < visible_first_line_len &&
+		       visible_wrap_offset &&
+		       visible_wrap_offset != wrap_offset)
+		{
+		  if (mb_cur_max > 1 && rl_byte_oriented == 0)
+		    nleft = _rl_screenwidth - _rl_last_c_pos;
+		  else
+		    nleft = _rl_screenwidth + wrap_offset - _rl_last_c_pos;
+		  if (nleft)
+		    _rl_clear_to_eol (nleft);
+		}
+#endif
+
+	      /* Since the new first line is now visible, save its length. */
+	      if (linenum == 0)
+		visible_first_line_len = (inv_botlin > 0) ? inv_lbreaks[1] : out - wrap_offset;
+	    }
+
+	  /* We may have deleted some lines.  If so, clear the left over
+	     blank ones at the bottom out. */
+	  if (_rl_vis_botlin > inv_botlin)
+	    {
+	      char *tt;
+	      for (; linenum <= _rl_vis_botlin; linenum++)
+		{
+		  tt = VIS_CHARS (linenum);
+		  _rl_move_vert (linenum);
+		  _rl_move_cursor_relative (0, tt, VIS_FACE(linenum));
+		  _rl_clear_to_eol
+		    ((linenum == _rl_vis_botlin) ? strlen (tt) : _rl_screenwidth);
+		}
+	    }
+	  _rl_vis_botlin = inv_botlin;
+
+	  /* CHANGED_SCREEN_LINE is set to 1 if we have moved to a
+	     different screen line during this redisplay. */
+	  changed_screen_line = _rl_last_v_pos != cursor_linenum;
+	  if (changed_screen_line)
+	    {
+	      _rl_move_vert (cursor_linenum);
+	      /* If we moved up to the line with the prompt using _rl_term_up,
+		 the physical cursor position on the screen stays the same,
+		 but the buffer position needs to be adjusted to account
+		 for invisible characters. */
+	      if ((mb_cur_max == 1 || rl_byte_oriented) && cursor_linenum == 0 && wrap_offset)
+		_rl_last_c_pos += wrap_offset;
+	    }
+
+	  /* Now we move the cursor to where it needs to be.  First, make
+	     sure we are on the correct line (cursor_linenum). */
+
+	  /* We have to reprint the prompt if it contains invisible
+	     characters, since it's not generally OK to just reprint
+	     the characters from the current cursor position.  But we
+	     only need to reprint it if the cursor is before the last
+	     invisible character in the prompt string. */
+	  /* XXX - why not use local_prompt_len? */
+	  nleft = prompt_visible_length + wrap_offset;
+	  if (cursor_linenum == 0 && wrap_offset > 0 && _rl_last_c_pos > 0 &&
+	      _rl_last_c_pos < PROMPT_ENDING_INDEX && local_prompt)
+	    {
+	      _rl_cr ();
+	      if (modmark)
+		_rl_output_some_chars ("*", 1);
+
+	      _rl_output_some_chars (local_prompt, nleft);
+	      if (mb_cur_max > 1 && rl_byte_oriented == 0)
+		_rl_last_c_pos = _rl_col_width (local_prompt, 0, nleft, 1) - wrap_offset + modmark;
+	      else
+		_rl_last_c_pos = nleft + modmark;
+	    }
+
+	  /* Where on that line?  And where does that line start
+	     in the buffer? */
+	  pos = inv_lbreaks[cursor_linenum];
+	  /* nleft == number of characters (bytes) in the line buffer between
+	     the start of the line and the desired cursor position. */
+	  nleft = cpos_buffer_position - pos;
+
+	  /* NLEFT is now a number of characters in a buffer.  When in a
+	     multibyte locale, however, _rl_last_c_pos is an absolute cursor
+	     position that doesn't take invisible characters in the prompt
+	     into account.  We use a fudge factor to compensate. */
+
+	  /* Since _rl_backspace() doesn't know about invisible characters in
+	     the prompt, and there's no good way to tell it, we compensate for
+	     those characters here and call _rl_backspace() directly if
+	     necessary */
+	  if (wrap_offset && cursor_linenum == 0 && nleft < _rl_last_c_pos)
+	    {
+	      /* TX == new physical cursor position in multibyte locale. */
+	      if (mb_cur_max > 1 && rl_byte_oriented == 0)
+		tx = _rl_col_width (&visible_line[pos], 0, nleft, 1) - visible_wrap_offset;
+	      else
+		tx = nleft;
+	      if (tx >= 0 && _rl_last_c_pos > tx)
+		{
+	          _rl_backspace (_rl_last_c_pos - tx);	/* XXX */
+	          _rl_last_c_pos = tx;
+		}
+	    }
+
+	  /* We need to note that in a multibyte locale we are dealing with
+	     _rl_last_c_pos as an absolute cursor position, but moving to a
+	     point specified by a buffer position (NLEFT) that doesn't take
+	     invisible characters into account. */
+	  if (mb_cur_max > 1 && rl_byte_oriented == 0)
+	    _rl_move_cursor_relative (nleft, &invisible_line[pos], &inv_face[pos]);
+	  else if (nleft != _rl_last_c_pos)
+	    _rl_move_cursor_relative (nleft, &invisible_line[pos], &inv_face[pos]);
+	}
+    }
+  else				/* Do horizontal scrolling. Much simpler */
+    {
+#define M_OFFSET(margin, offset) ((margin) == 0 ? offset : 0)
+      int lmargin, ndisp, nleft, phys_c_pos, t;
+
+      /* Always at top line. */
+      _rl_last_v_pos = 0;
+
+      /* Compute where in the buffer the displayed line should start.  This
+	 will be LMARGIN. */
+
+      /* The number of characters that will be displayed before the cursor. */
+      ndisp = cpos_buffer_position - wrap_offset;
+      nleft  = prompt_visible_length + wrap_offset;
+      /* Where the new cursor position will be on the screen.  This can be
+	 longer than SCREENWIDTH; if it is, lmargin will be adjusted. */
+      phys_c_pos = cpos_buffer_position - (last_lmargin ? last_lmargin : wrap_offset);
+      t = _rl_screenwidth / 3;
+
+      /* If the number of characters had already exceeded the screenwidth,
+	 last_lmargin will be > 0. */
+
+      /* If the number of characters to be displayed is more than the screen
+	 width, compute the starting offset so that the cursor is about
+	 two-thirds of the way across the screen. */
+      if (phys_c_pos > _rl_screenwidth - 2)
+	{
+	  lmargin = cpos_buffer_position - (2 * t);
+	  if (lmargin < 0)
+	    lmargin = 0;
+	  /* If the left margin would be in the middle of a prompt with
+	     invisible characters, don't display the prompt at all. */
+	  if (wrap_offset && lmargin > 0 && lmargin < nleft)
+	    lmargin = nleft;
+	}
+      else if (ndisp < _rl_screenwidth - 2)		/* XXX - was -1 */
+	lmargin = 0;
+      else if (phys_c_pos < 1)
+	{
+	  /* If we are moving back towards the beginning of the line and
+	     the last margin is no longer correct, compute a new one. */
+	  lmargin = ((cpos_buffer_position - 1) / t) * t;	/* XXX */
+	  if (wrap_offset && lmargin > 0 && lmargin < nleft)
+	    lmargin = nleft;
+	}
+      else
+	lmargin = last_lmargin;
+
+      displaying_prompt_first_line = lmargin < nleft;
+
+      /* If the first character on the screen isn't the first character
+	 in the display line, indicate this with a special character. */
+      if (lmargin > 0)
+	invisible_line[lmargin] = '<';
+
+      /* If SCREENWIDTH characters starting at LMARGIN do not encompass
+	 the whole line, indicate that with a special character at the
+	 right edge of the screen.  If LMARGIN is 0, we need to take the
+	 wrap offset into account. */
+      t = lmargin + M_OFFSET (lmargin, wrap_offset) + _rl_screenwidth;
+      if (t > 0 && t < out)
+	invisible_line[t - 1] = '>';
+
+      if (rl_display_fixed == 0 || forced_display || lmargin != last_lmargin)
+	{
+	  forced_display = 0;
+	  o_cpos = _rl_last_c_pos;
+	  cpos_adjusted = 0;
+	  update_line (&visible_line[last_lmargin], &vis_face[last_lmargin],
+		       &invisible_line[lmargin], &inv_face[lmargin],
+		       0,
+		       _rl_screenwidth + visible_wrap_offset,
+		       _rl_screenwidth + (lmargin ? 0 : wrap_offset),
+		       0);
+
+	  if ((mb_cur_max > 1 && rl_byte_oriented == 0) &&
+		displaying_prompt_first_line && OLD_CPOS_IN_PROMPT())
+	    _rl_last_c_pos -= prompt_invis_chars_first_line;	/* XXX - was wrap_offset */
+
+	  /* If the visible new line is shorter than the old, but the number
+	     of invisible characters is greater, and we are at the end of
+	     the new line, we need to clear to eol. */
+	  t = _rl_last_c_pos - M_OFFSET (lmargin, wrap_offset);
+	  if ((M_OFFSET (lmargin, wrap_offset) > visible_wrap_offset) &&
+	      (_rl_last_c_pos == out) && displaying_prompt_first_line &&
+	      t < visible_first_line_len)
+	    {
+	      nleft = _rl_screenwidth - t;
+	      _rl_clear_to_eol (nleft);
+	    }
+	  visible_first_line_len = out - lmargin - M_OFFSET (lmargin, wrap_offset);
+	  if (visible_first_line_len > _rl_screenwidth)
+	    visible_first_line_len = _rl_screenwidth;
+
+	  _rl_move_cursor_relative (cpos_buffer_position - lmargin, &invisible_line[lmargin], &inv_face[lmargin]);
+	  last_lmargin = lmargin;
+	}
+    }
+  fflush (rl_outstream);
+
+  /* Swap visible and non-visible lines. */
+  {
+    struct line_state *vtemp = line_state_visible;
+
+    line_state_visible = line_state_invisible;
+    line_state_invisible = vtemp;
+
+    rl_display_fixed = 0;
+    /* If we are displaying on a single line, and last_lmargin is > 0, we
+       are not displaying any invisible characters, so set visible_wrap_offset
+       to 0. */
+    if (_rl_horizontal_scroll_mode && last_lmargin)
+      visible_wrap_offset = 0;
+    else
+      visible_wrap_offset = wrap_offset;
+
+    _rl_quick_redisplay = 0;
+  }
+
+  RL_UNSETSTATE (RL_STATE_REDISPLAYING);
+  _rl_release_sigint ();
+}
+
+static void
+putc_face (int c, int face, char *cur_face)
+{
+  char cf;
+  cf = *cur_face;
+  if (cf != face)
+    {
+      if (cf != FACE_NORMAL && cf != FACE_STANDOUT)
+	return;
+      if (face != FACE_NORMAL && face != FACE_STANDOUT)
+	return;
+      if (face == FACE_STANDOUT && cf == FACE_NORMAL)
+        _rl_standout_on ();
+      if (face == FACE_NORMAL && cf == FACE_STANDOUT)
+        _rl_standout_off ();
+      *cur_face = face;
+    }
+  if (c != EOF)
+    putc (c, rl_outstream);
+}
+
+static void
+puts_face (const char *str, const char *face, int n)
+{
+  int i;
+  char cur_face;
+
+  for (cur_face = FACE_NORMAL, i = 0; i < n; i++)
+    putc_face (str[i], face[i], &cur_face);
+  putc_face (EOF, FACE_NORMAL, &cur_face);
+}
+
+static void
+norm_face (char *face, int n)
+{
+  memset (face, FACE_NORMAL, n);
+}
+
+#define ADJUST_CPOS(x) do { _rl_last_c_pos -= (x) ; cpos_adjusted = 1; } while (0)
+
+/* PWP: update_line() is based on finding the middle difference of each
+   line on the screen; vis:
+
+			     /old first difference
+	/beginning of line   |              /old last same       /old EOL
+	v 		     v              v                    v
+old:	eddie> Oh, my little gruntle-buggy is to me, as lurgid as
+new:	eddie> Oh, my little buggy says to me, as lurgid as
+	^		     ^        ^			   ^
+	\beginning of line   |	      \new last same	   \new end of line
+			     \new first difference
+
+   All are character pointers for the sake of speed.  Special cases for
+   no differences, as well as for end of line additions must be handled.
+
+   Could be made even smarter, but this works well enough */
+static void
+update_line (char *old, char *old_face, char *new, char *new_face, int current_line, int omax, int nmax, int inv_botlin)
+{
+  char *ofd, *ols, *oe, *nfd, *nls, *ne;
+  char *ofdf, *nfdf, *olsf, *nlsf;
+  int temp, lendiff, wsatend, od, nd, twidth, o_cpos;
+  int current_invis_chars;
+  int col_lendiff, col_temp;
+  int bytes_to_insert;
+  int mb_cur_max = MB_CUR_MAX;
+#if defined (HANDLE_MULTIBYTE)
+  mbstate_t ps_new, ps_old;
+  int new_offset, old_offset;
+#endif
+
+  /* If we're at the right edge of a terminal that supports xn, we're
+     ready to wrap around, so do so.  This fixes problems with knowing
+     the exact cursor position and cut-and-paste with certain terminal
+     emulators.  In this calculation, TEMP is the physical screen
+     position of the cursor. */
+  if (mb_cur_max > 1 && rl_byte_oriented == 0)
+    temp = _rl_last_c_pos;
+  else
+    temp = _rl_last_c_pos - WRAP_OFFSET (_rl_last_v_pos, visible_wrap_offset);
+  if (temp == _rl_screenwidth && _rl_term_autowrap && !_rl_horizontal_scroll_mode
+	&& _rl_last_v_pos == current_line - 1)
+    {
+      /* We're going to wrap around by writing the first character of NEW to
+	 the screen and dealing with changes to what's visible by modifying
+	 OLD to match it.  Complicated by the presence of multi-width
+	 characters at the end of the line or beginning of the new one. */
+      /* old is always somewhere in visible_line; new is always somewhere in
+         invisible_line.  These should always be null-terminated. */
+#if defined (HANDLE_MULTIBYTE)
+      if (mb_cur_max > 1 && rl_byte_oriented == 0)
+	{
+	  wchar_t wc;
+	  mbstate_t ps;
+	  int oldwidth, newwidth;
+	  int oldbytes, newbytes;
+	  size_t ret;
+
+	  /* This fixes only double-column characters, but if the wrapped
+	     character consumes more than three columns, spaces will be
+	     inserted in the string buffer. */
+	  /* XXX remember that we are working on the invisible line right now;
+	     we don't swap visible and invisible until just before rl_redisplay
+	     returns */
+	  /* This will remove the extra placeholder space we added with
+	     _rl_wrapped_multicolumn */
+	  if (current_line < line_state_invisible->wbsize && line_state_invisible->wrapped_line[current_line] > 0)
+	    _rl_clear_to_eol (line_state_invisible->wrapped_line[current_line]);
+
+	  /* 1. how many screen positions does first char in old consume? */
+	  memset (&ps, 0, sizeof (mbstate_t));
+	  ret = mbrtowc (&wc, old, mb_cur_max, &ps);
+	  oldbytes = ret;
+	  if (MB_INVALIDCH (ret))
+	    {
+	      oldwidth = 1;
+	      oldbytes = 1;
+	    }
+	  else if (MB_NULLWCH (ret))
+	    oldwidth = 0;
+	  else
+	    oldwidth = WCWIDTH (wc);
+	  if (oldwidth < 0)
+	    oldwidth = 1;
+
+	  /* 2. how many screen positions does the first char in new consume? */
+	  memset (&ps, 0, sizeof (mbstate_t));
+	  ret = mbrtowc (&wc, new, mb_cur_max, &ps);
+	  newbytes = ret;
+	  if (MB_INVALIDCH (ret))
+	    {
+	      newwidth = 1;
+	      newbytes = 1;
+	    }
+	  else if (MB_NULLWCH (ret))
+	    newwidth = 0;
+	  else
+	    newwidth = WCWIDTH (wc);
+	  if (newwidth < 0)
+	    newwidth = 1;
+
+	  /* 3. if the new width is less than the old width, we need to keep
+	     going in new until we have consumed at least that many screen
+	     positions, and figure out how many bytes that will take */
+	  while (newbytes < nmax && newwidth < oldwidth)
+	    {
+	      int t;
+
+	      ret = mbrtowc (&wc, new+newbytes, mb_cur_max, &ps);
+	      if (MB_INVALIDCH (ret))
+		{
+		  newwidth += 1;
+		  newbytes += 1;
+		}
+	      else if (MB_NULLWCH (ret))
+	        break;
+	      else
+		{
+		  t = WCWIDTH (wc);
+		  newwidth += (t >= 0) ? t : 1;
+		  newbytes += ret;
+		}
+	    }
+	  /* 4. If the new width is more than the old width, keep going in old
+	     until we have consumed exactly that many screen positions, and
+	     figure out how many bytes that will take.  This is an optimization */
+	  while (oldbytes < omax && oldwidth < newwidth)
+	    {
+	      int t;
+
+	      ret = mbrtowc (&wc, old+oldbytes, mb_cur_max, &ps);
+	      if (MB_INVALIDCH (ret))
+		{
+		  oldwidth += 1;
+		  oldbytes += 1;
+		}
+	      else if (MB_NULLWCH (ret))
+	        break;
+	      else
+		{
+		  t = WCWIDTH (wc);
+		  oldwidth += (t >= 0) ? t : 1;
+		  oldbytes += ret;
+		}
+	    }
+	  /* 5. write the first newbytes of new, which takes newwidth.  This is
+	     where the screen wrapping takes place, and we are now writing
+	     characters onto the new line. We need to fix up old so it
+	     accurately reflects what is on the screen after the
+	     _rl_output_some_chars below. */
+	  if (newwidth > 0)
+	    {
+	      int count, i, j;
+	      char *optr;
+
+	      puts_face (new, new_face, newbytes);
+	      _rl_last_c_pos = newwidth;
+	      _rl_last_v_pos++;
+
+	      /* 5a. If the number of screen positions doesn't match, punt
+		 and do a dumb update.
+		 5b. If the number of bytes is greater in the new line than
+		 the old, do a dumb update, because there is no guarantee we
+		 can extend the old line enough to fit the new bytes. */
+	      if (newwidth != oldwidth || newbytes > oldbytes)
+		{
+		  oe = old + omax;
+		  ne = new + nmax;
+		  nd = newbytes;
+		  nfd = new + nd;
+		  ofdf = old_face + oldbytes;
+		  nfdf = new_face + newbytes;
+
+		  goto dumb_update;
+		}
+	      if (oldbytes != 0 && newbytes != 0)
+		{
+		  /* We have written as many bytes from new as we need to
+		     consume the first character of old. Fix up `old' so it
+		     reflects the new screen contents.  We use +1 in the
+		     memmove call to copy the trailing NUL. */
+		  /* (strlen(old+oldbytes) == (omax - oldbytes - 1)) */
+
+		  /* Don't bother trying to fit the bytes if the number of bytes
+		     doesn't change. */
+		  if (oldbytes != newbytes)
+		    {
+		      memmove (old+newbytes, old+oldbytes, strlen (old+oldbytes) + 1);
+		      memmove (old_face+newbytes, old_face+oldbytes, strlen (old+oldbytes) + 1);
+		    }
+		  memcpy (old, new, newbytes);
+		  memcpy (old_face, new_face, newbytes);
+		  j = newbytes - oldbytes;
+		  omax += j;
+		  /* Fix up indices if we copy data from one line to another */
+		  for (i = current_line+1; j != 0 && i <= inv_botlin+1 && i <=_rl_vis_botlin+1; i++)
+		    vis_lbreaks[i] += j;
+		}
+	    }
+	  else
+	    {
+	      putc (' ', rl_outstream);
+	      _rl_last_c_pos = 1;
+	      _rl_last_v_pos++;
+	      if (old[0] && new[0])
+		{
+		  old[0] = new[0];
+		  old_face[0] = new_face[0];
+		}
+	    }
+	}
+      else
+#endif
+	{
+	  if (new[0])
+	    puts_face (new, new_face, 1);
+	  else
+	    putc (' ', rl_outstream);
+	  _rl_last_c_pos = 1;
+	  _rl_last_v_pos++;
+	  if (old[0] && new[0])
+	    {
+	      old[0] = new[0];
+	      old_face[0] = new_face[0];
+	    }
+	}
+    }
+
+  /* We know that we are dealing with a single screen line here */
+  if (_rl_quick_redisplay)
+    {
+      nfd = new;
+      nfdf = new_face;
+      ofd = old;
+      ofdf = old_face;
+      for (od = 0, oe = ofd; od < omax && *oe; oe++, od++);
+      for (nd = 0, ne = nfd; nd < nmax && *ne; ne++, nd++);
+      od = nd = 0;
+      _rl_move_cursor_relative (0, old, old_face);
+
+      bytes_to_insert = ne - nfd;
+      if (bytes_to_insert < local_prompt_len)	/* ??? */
+	goto dumb_update;
+
+      /* output the prompt, output the line contents, clear the rest */
+      _rl_output_some_chars (nfd, local_prompt_len);
+      if (mb_cur_max > 1 && rl_byte_oriented == 0)
+	_rl_last_c_pos = prompt_physical_chars;
+      else
+	_rl_last_c_pos = local_prompt_len;
+
+      bytes_to_insert -= local_prompt_len;
+      if (bytes_to_insert > 0)
+	{
+	  puts_face (new+local_prompt_len, nfdf+local_prompt_len, bytes_to_insert);
+	  if (mb_cur_max > 1 && rl_byte_oriented)
+	    _rl_last_c_pos += _rl_col_width (new, local_prompt_len, ne-new, 1);
+	  else
+	    _rl_last_c_pos += bytes_to_insert;
+	}
+
+      /* See comments at dumb_update: for an explanation of this heuristic */
+      if (nmax < omax)
+	goto clear_rest_of_line;
+      else if ((nmax - W_OFFSET(current_line, wrap_offset)) < (omax - W_OFFSET (current_line, visible_wrap_offset)))
+	goto clear_rest_of_line;
+      else
+	return;
+    }
+
+  /* Find first difference. */
+#if defined (HANDLE_MULTIBYTE)
+  if (mb_cur_max > 1 && rl_byte_oriented == 0)
+    {
+      /* See if the old line is a subset of the new line, so that the
+	 only change is adding characters. */
+      temp = (omax < nmax) ? omax : nmax;
+      if (memcmp (old, new, temp) == 0 && memcmp (old_face, new_face, temp) == 0)
+	{
+	  new_offset = old_offset = temp;	/* adding at the end */
+	  ofd = old + temp;
+	  ofdf = old_face + temp;
+	  nfd = new + temp;
+	  nfdf = new_face + temp;
+	}
+      else
+	{      
+	  memset (&ps_new, 0, sizeof(mbstate_t));
+	  memset (&ps_old, 0, sizeof(mbstate_t));
+
+	  /* Are the old and new lines the same? */
+	  if (omax == nmax && memcmp (new, old, omax) == 0 && memcmp (new_face, old_face, omax) == 0)
+	    {
+	      old_offset = omax;
+	      new_offset = nmax;
+	      ofd = old + omax;
+	      ofdf = old_face + omax;
+	      nfd = new + nmax;
+	      nfdf = new_face + nmax;
+	    }
+	  else
+	    {
+	      /* Go through the line from the beginning and find the first
+		 difference. We assume that faces change at (possibly multi-
+		 byte) character boundaries. */
+	      new_offset = old_offset = 0;
+	      for (ofd = old, ofdf = old_face, nfd = new, nfdf = new_face;
+		    (ofd - old < omax) && *ofd &&
+		    _rl_compare_chars(old, old_offset, &ps_old, new, new_offset, &ps_new) &&
+		    *ofdf == *nfdf; )
+		{
+		  old_offset = _rl_find_next_mbchar (old, old_offset, 1, MB_FIND_ANY);
+		  new_offset = _rl_find_next_mbchar (new, new_offset, 1, MB_FIND_ANY);
+
+		  ofd = old + old_offset;
+		  ofdf = old_face + old_offset;
+		  nfd = new + new_offset;
+		  nfdf = new_face + new_offset;
+		}
+	    }
+	}
+    }
+  else
+#endif
+  for (ofd = old, ofdf = old_face, nfd = new, nfdf = new_face;
+       (ofd - old < omax) && *ofd && (*ofd == *nfd) && (*ofdf == *nfdf);
+       ofd++, nfd++, ofdf++, nfdf++)
+    ;
+
+  /* Move to the end of the screen line.  ND and OD are used to keep track
+     of the distance between ne and new and oe and old, respectively, to
+     move a subtraction out of each loop. */
+  for (od = ofd - old, oe = ofd; od < omax && *oe; oe++, od++);
+  for (nd = nfd - new, ne = nfd; nd < nmax && *ne; ne++, nd++);
+
+  /* If no difference, continue to next line. */
+  if (ofd == oe && nfd == ne)
+    return;
+
+#if defined (HANDLE_MULTIBYTE)
+  if (mb_cur_max > 1 && rl_byte_oriented == 0 && _rl_utf8locale)
+    {
+      wchar_t wc;
+      mbstate_t ps = { 0 };
+      int t;
+
+      /* If the first character in the difference is a zero-width character,
+	 assume it's a combining character and back one up so the two base
+	 characters no longer compare equivalently. */
+      t = mbrtowc (&wc, ofd, mb_cur_max, &ps);
+      if (t > 0 && UNICODE_COMBINING_CHAR (wc) && WCWIDTH (wc) == 0)
+	{
+	  old_offset = _rl_find_prev_mbchar (old, ofd - old, MB_FIND_ANY);
+	  new_offset = _rl_find_prev_mbchar (new, nfd - new, MB_FIND_ANY);
+	  ofd = old + old_offset;	/* equal by definition */
+	  ofdf = old_face + old_offset;
+	  nfd = new + new_offset;
+	  nfdf = new_face + new_offset;
+	}
+    }
+#endif
+
+  wsatend = 1;			/* flag for trailing whitespace */
+
+#if defined (HANDLE_MULTIBYTE)
+  /* Find the last character that is the same between the two lines.  This
+     bounds the region that needs to change. */
+  if (mb_cur_max > 1 && rl_byte_oriented == 0)
+    {
+      ols = old + _rl_find_prev_mbchar (old, oe - old, MB_FIND_ANY);
+      olsf = old_face + (ols - old);
+      nls = new + _rl_find_prev_mbchar (new, ne - new, MB_FIND_ANY);
+      nlsf = new_face + (nls - new);
+
+      while ((ols > ofd) && (nls > nfd))
+	{
+	  memset (&ps_old, 0, sizeof (mbstate_t));
+	  memset (&ps_new, 0, sizeof (mbstate_t));
+
+	  if (_rl_compare_chars (old, ols - old, &ps_old, new, nls - new, &ps_new) == 0 ||
+		*olsf != *nlsf)
+	    break;
+
+	  if (*ols == ' ')
+	    wsatend = 0;
+
+	  ols = old + _rl_find_prev_mbchar (old, ols - old, MB_FIND_ANY);
+	  olsf = old_face + (ols - old);
+	  nls = new + _rl_find_prev_mbchar (new, nls - new, MB_FIND_ANY);
+	  nlsf = new_face + (nls - new);
+	}
+    }
+  else
+    {
+#endif /* HANDLE_MULTIBYTE */
+  ols = oe - 1;			/* find last same */
+  olsf = old_face + (ols - old);
+  nls = ne - 1;
+  nlsf = new_face + (nls - new);
+  while ((ols > ofd) && (nls > nfd) && (*ols == *nls) && (*olsf == *nlsf))
+    {
+      if (*ols != ' ')
+	wsatend = 0;
+      ols--; olsf--;
+      nls--; nlsf--;
+    }
+#if defined (HANDLE_MULTIBYTE)
+    }
+#endif
+
+  if (wsatend)
+    {
+      ols = oe;
+      olsf = old_face + (ols - old);
+      nls = ne;
+      nlsf = new_face + (nls - new);
+    }
+#if defined (HANDLE_MULTIBYTE)
+  /* This may not work for stateful encoding, but who cares?  To handle
+     stateful encoding properly, we have to scan each string from the
+     beginning and compare. */
+  else if (_rl_compare_chars (ols, 0, NULL, nls, 0, NULL) == 0 || *olsf != *nlsf)
+#else
+  else if (*ols != *nls || *olsf != *nlsf)
+#endif
+    {
+      if (*ols)			/* don't step past the NUL */
+	{
+	  if (mb_cur_max > 1 && rl_byte_oriented == 0)
+	    ols = old + _rl_find_next_mbchar (old, ols - old, 1, MB_FIND_ANY);
+	  else
+	    ols++;
+	}
+      if (*nls)
+	{
+	  if (mb_cur_max > 1 && rl_byte_oriented == 0)
+	    nls = new + _rl_find_next_mbchar (new, nls - new, 1, MB_FIND_ANY);
+	  else
+	    nls++;
+	}
+      olsf = old_face + (ols - old);
+      nlsf = new_face + (nls - new);
+    }
+
+  /* count of invisible characters in the current invisible line. */
+  current_invis_chars = W_OFFSET (current_line, wrap_offset);
+  if (_rl_last_v_pos != current_line)
+    {
+      _rl_move_vert (current_line);
+      /* We have moved up to a new screen line.  This line may or may not have
+         invisible characters on it, but we do our best to recalculate
+         visible_wrap_offset based on what we know. */
+      if (current_line == 0)
+	visible_wrap_offset = prompt_invis_chars_first_line;	/* XXX */
+#if 0		/* XXX - not yet */
+      else if (current_line == prompt_last_screen_line && wrap_offset > prompt_invis_chars_first_line)
+	visible_wrap_offset = wrap_offset - prompt_invis_chars_first_line
+#endif
+      if ((mb_cur_max == 1 || rl_byte_oriented) && current_line == 0 && visible_wrap_offset)
+	_rl_last_c_pos += visible_wrap_offset;
+    }
+
+  /* If this is the first line and there are invisible characters in the
+     prompt string, and the prompt string has not changed, and the current
+     cursor position is before the last invisible character in the prompt,
+     and the index of the character to move to is past the end of the prompt
+     string, then redraw the entire prompt string.  We can only do this
+     reliably if the terminal supports a `cr' capability.
+
+     This can also happen if the prompt string has changed, and the first
+     difference in the line is in the middle of the prompt string, after a
+     sequence of invisible characters (worst case) and before the end of
+     the prompt.  In this case, we have to redraw the entire prompt string
+     so that the entire sequence of invisible characters is drawn.  We need
+     to handle the worst case, when the difference is after (or in the middle
+     of) a sequence of invisible characters that changes the text color and
+     before the sequence that restores the text color to normal.  Then we have
+     to make sure that the lines still differ -- if they don't, we can
+     return immediately.
+
+     This is not an efficiency hack -- there is a problem with redrawing
+     portions of the prompt string if they contain terminal escape
+     sequences (like drawing the `unbold' sequence without a corresponding
+     `bold') that manifests itself on certain terminals. */
+
+  lendiff = local_prompt_len;
+  if (lendiff > nmax)
+    lendiff = nmax;
+  od = ofd - old;	/* index of first difference in visible line */
+  nd = nfd - new;	/* nd, od are buffer indexes */
+  if (current_line == 0 && !_rl_horizontal_scroll_mode &&
+      _rl_term_cr && lendiff > prompt_visible_length && _rl_last_c_pos > 0 &&
+      (((od > 0 || nd > 0) && (od <= prompt_last_invisible || nd <= prompt_last_invisible)) ||
+		((od >= lendiff) && _rl_last_c_pos < PROMPT_ENDING_INDEX)))
+    {
+      _rl_cr ();
+      if (modmark)
+	_rl_output_some_chars ("*", 1);
+      _rl_output_some_chars (local_prompt, lendiff);
+      if (mb_cur_max > 1 && rl_byte_oriented == 0)
+	{
+	  /* If we just output the entire prompt string we can take advantage
+	     of knowing the number of physical characters in the prompt. If
+	     the prompt wraps lines (lendiff clamped at nmax), we can't. */
+	  if (lendiff == local_prompt_len)
+	    _rl_last_c_pos = prompt_physical_chars + modmark;
+	  else
+	    /* We take wrap_offset into account here so we can pass correct
+	       information to _rl_move_cursor_relative. */
+	    _rl_last_c_pos = _rl_col_width (local_prompt, 0, lendiff, 1) - wrap_offset + modmark;
+	  cpos_adjusted = 1;
+	}
+      else
+	_rl_last_c_pos = lendiff + modmark;
+
+      /* Now if we have printed the prompt string because the first difference
+	 was within the prompt, see if we need to recompute where the lines
+	 differ.  Check whether where we are now is past the last place where
+	 the old and new lines are the same and short-circuit now if we are. */
+      if ((od <= prompt_last_invisible || nd <= prompt_last_invisible) &&
+          omax == nmax &&
+	  lendiff > (ols-old) && lendiff > (nls-new))
+	return;
+
+      /* XXX - we need to fix up our calculations if we are now past the
+	 old ofd/nfd and the prompt length (or line length) has changed.
+	 We punt on the problem and do a dumb update.  We'd like to be able
+	 to just output the prompt from the beginning of the line up to the
+	 first difference, but you don't know the number of invisible
+	 characters in that case.
+	 This needs a lot of work to be efficient, but it usually doesn't matter. */
+      if ((od <= prompt_last_invisible || nd <= prompt_last_invisible))
+	{
+	  nfd = new + lendiff;	/* number of characters we output above */
+	  nfdf = new_face + lendiff;
+	  nd = lendiff;
+
+	  /* Do a dumb update and return */
+dumb_update:
+	  temp = ne - nfd;
+	  if (temp > 0)
+	    {
+	      puts_face (nfd, nfdf, temp);
+	      if (mb_cur_max > 1 && rl_byte_oriented == 0)
+		{
+		  _rl_last_c_pos += _rl_col_width (new, nd, ne - new, 1);
+		  /* Need to adjust here based on wrap_offset. Guess that if
+		     this is the line containing the last line of the prompt
+		     we need to adjust by
+		     	wrap_offset-prompt_invis_chars_first_line
+		     on the assumption that this is the number of invisible
+		     characters in the last line of the prompt. */
+		  if (wrap_offset > prompt_invis_chars_first_line &&
+		      current_line == prompt_last_screen_line &&
+		      prompt_physical_chars > _rl_screenwidth &&
+		      _rl_horizontal_scroll_mode == 0)
+		    ADJUST_CPOS (wrap_offset - prompt_invis_chars_first_line);
+
+		  /* If we just output a new line including the prompt, and
+		     the prompt includes invisible characters, we need to
+		     account for them in the _rl_last_c_pos calculation, since
+		     _rl_col_width does not. This happens when other code does
+		     a goto dumb_update; */
+		  else if (current_line == 0 &&
+			   nfd == new &&
+			   prompt_invis_chars_first_line &&
+			   local_prompt_len <= temp &&
+			   wrap_offset >= prompt_invis_chars_first_line &&
+			   _rl_horizontal_scroll_mode == 0)
+		    ADJUST_CPOS (prompt_invis_chars_first_line);
+		}
+	      else
+		_rl_last_c_pos += temp;
+	    }
+	  /* This is a useful heuristic, but what we really want is to clear
+	     if the new number of visible screen characters is less than the
+	     old number of visible screen characters. If the prompt has changed,
+	     we don't really have enough information about the visible line to
+	     know for sure, so we use another heuristic calclulation below. */
+	  if (nmax < omax)
+	    goto clear_rest_of_line;	/* XXX */
+	  else if ((nmax - W_OFFSET(current_line, wrap_offset)) < (omax - W_OFFSET (current_line, visible_wrap_offset)))
+	    goto clear_rest_of_line;
+	  else
+	    return;
+	}
+    }
+
+  o_cpos = _rl_last_c_pos;
+
+  /* When this function returns, _rl_last_c_pos is correct, and an absolute
+     cursor position in multibyte mode, but a buffer index when not in a
+     multibyte locale. */
+  _rl_move_cursor_relative (od, old, old_face);
+
+#if defined (HANDLE_MULTIBYTE)
+  /* We need to indicate that the cursor position is correct in the presence of
+     invisible characters in the prompt string.  Let's see if setting this when
+     we make sure we're at the end of the drawn prompt string works. */
+  if (current_line == 0 && mb_cur_max > 1 && rl_byte_oriented == 0 &&
+      (_rl_last_c_pos > 0 || o_cpos > 0) &&
+      _rl_last_c_pos == prompt_physical_chars)
+    cpos_adjusted = 1;
+#endif
+
+  /* if (len (new) > len (old))
+     lendiff == difference in buffer (bytes)
+     col_lendiff == difference on screen (columns)
+     When not using multibyte characters, these are equal */
+  lendiff = (nls - nfd) - (ols - ofd);
+  if (mb_cur_max > 1 && rl_byte_oriented == 0)
+    {
+      int newchars, newwidth, newind;
+      int oldchars, oldwidth, oldind;
+
+      newchars = nls - new;
+      oldchars = ols - old;
+
+      /* If we can do it, try to adjust nls and ols so that nls-new will
+	 contain the entire new prompt string. That way we can use
+	 prompt_physical_chars and not have to recompute column widths.
+	 _rl_col_width adds wrap_offset and expects the caller to compensate,
+	 which we do below, so we do the same thing if we don't call
+	 _rl_col_width.
+	 We don't have to compare, since we know the characters are the same.
+	 The check of differing numbers of invisible chars may be extraneous.
+	 XXX - experimental */
+      if (current_line == 0 && nfd == new && newchars > prompt_last_invisible &&
+	  newchars <= local_prompt_len &&
+	  local_prompt_len <= nmax &&
+	  current_invis_chars != visible_wrap_offset)
+	{
+	  while (newchars < nmax && oldchars < omax &&  newchars < local_prompt_len)
+	    {
+#if defined (HANDLE_MULTIBYTE)
+	      newind = _rl_find_next_mbchar (new, newchars, 1, MB_FIND_NONZERO);
+	      oldind = _rl_find_next_mbchar (old, oldchars, 1, MB_FIND_NONZERO);
+
+	      nls += newind - newchars;
+	      ols += oldind - oldchars;
+
+	      newchars = newind;
+	      oldchars = oldind;
+#else
+	      nls++; ols++;
+	      newchars++; oldchars++;
+#endif
+	    }
+	  newwidth = (newchars == local_prompt_len) ? prompt_physical_chars + wrap_offset
+	  					    : _rl_col_width (new, 0, nls - new, 1);
+	  /* if we changed nls and ols, we need to recompute lendiff */
+	  lendiff = (nls - nfd) - (ols - ofd);
+
+	  nlsf = new_face + (nls - new);
+	  olsf = old_face + (ols - old);
+	}
+      else
+	newwidth = _rl_col_width (new, nfd - new, nls - new, 1);
+
+      oldwidth = _rl_col_width (old, ofd - old, ols - old, 1);
+
+      col_lendiff = newwidth - oldwidth;
+    }
+  else
+    col_lendiff = lendiff;
+
+  /* col_lendiff uses _rl_col_width(), which doesn't know about whether or not
+     the multibyte characters it counts are invisible, so unless we're printing
+     the entire prompt string (in which case we can use prompt_physical_chars)
+     the count is short by the number of bytes in the invisible multibyte
+     characters - the number of multibyte characters.
+
+     We don't have a good way to solve this without moving to something like
+     a bitmap that indicates which characters are visible and which are
+     invisible. We fix it up (imperfectly) in the caller and by trying to use
+     the entire prompt string wherever we can. */
+     
+  /* If we are changing the number of invisible characters in a line, and
+     the spot of first difference is before the end of the invisible chars,
+     lendiff needs to be adjusted. */
+  if (current_line == 0 && current_invis_chars != visible_wrap_offset)
+    {
+      if (mb_cur_max > 1 && rl_byte_oriented == 0)
+	{
+	  lendiff += visible_wrap_offset - current_invis_chars;
+	  col_lendiff += visible_wrap_offset - current_invis_chars;
+	}
+      else
+	{
+	  lendiff += visible_wrap_offset - current_invis_chars;
+	  col_lendiff = lendiff;
+	}
+    }
+
+  /* We use temp as a count of the number of bytes from the first difference
+     to the end of the new line.  col_temp is the corresponding number of
+     screen columns.  A `dumb' update moves to the spot of first difference
+     and writes TEMP bytes. */
+  /* Insert (diff (len (old), len (new)) ch. */
+  temp = ne - nfd;
+  if (mb_cur_max > 1 && rl_byte_oriented == 0)
+    col_temp = _rl_col_width (new, nfd - new, ne - new, 1);
+  else
+    col_temp = temp;
+
+  /* how many bytes from the new line buffer to write to the display */
+  bytes_to_insert = nls - nfd;
+
+  /* col_lendiff > 0 if we are adding characters to the line */
+  if (col_lendiff > 0)	/* XXX - was lendiff */
+    {
+      /* Non-zero if we're increasing the number of lines. */
+      int gl = current_line >= _rl_vis_botlin && inv_botlin > _rl_vis_botlin;
+
+      /* If col_lendiff is > 0, implying that the new string takes up more
+	 screen real estate than the old, but lendiff is < 0, meaning that it
+	 takes fewer bytes, we need to just output the characters starting
+	 from the first difference.  These will overwrite what is on the
+	 display, so there's no reason to do a smart update.  This can really
+	 only happen in a multibyte environment. */
+      if (lendiff < 0)
+	{
+	  puts_face (nfd, nfdf, temp);
+	  _rl_last_c_pos += col_temp;
+	  /* If nfd begins before any invisible characters in the prompt,
+	     adjust _rl_last_c_pos to account for wrap_offset and set
+	     cpos_adjusted to let the caller know. */
+	  if (current_line == 0 && displaying_prompt_first_line && wrap_offset && ((nfd - new) <= prompt_last_invisible))
+	    ADJUST_CPOS (wrap_offset);	/* XXX - prompt_invis_chars_first_line? */
+	  return;
+	}
+      /* Sometimes it is cheaper to print the characters rather than
+	 use the terminal's capabilities.  If we're growing the number
+	 of lines, make sure we actually cause the new line to wrap
+	 around on auto-wrapping terminals. */
+      else if (_rl_terminal_can_insert && ((2 * col_temp) >= col_lendiff || _rl_term_IC) && (!_rl_term_autowrap || !gl))
+	{
+	  /* If lendiff > prompt_visible_length and _rl_last_c_pos == 0 and
+	     _rl_horizontal_scroll_mode == 1, inserting the characters with
+	     _rl_term_IC or _rl_term_ic will screw up the screen because of the
+	     invisible characters.  We need to just draw them. */
+	  /* The same thing happens if we're trying to draw before the last
+	     invisible character in the prompt string or we're increasing the
+	     number of invisible characters in the line and we're not drawing
+	     the entire prompt string. */
+	  if (*ols && ((_rl_horizontal_scroll_mode &&
+			_rl_last_c_pos == 0 &&
+			lendiff > prompt_visible_length &&
+			current_invis_chars > 0) == 0) &&
+		      (((mb_cur_max > 1 && rl_byte_oriented == 0) &&
+		        current_line == 0 && wrap_offset &&
+		        ((nfd - new) <= prompt_last_invisible) &&
+		        (col_lendiff < prompt_visible_length)) == 0) &&
+		      (visible_wrap_offset >= current_invis_chars))
+	    {
+	      open_some_spaces (col_lendiff);
+	      puts_face (nfd, nfdf, bytes_to_insert);
+	      if (mb_cur_max > 1 && rl_byte_oriented == 0)
+		_rl_last_c_pos += _rl_col_width (nfd, 0, bytes_to_insert, 1);
+	      else
+		_rl_last_c_pos += bytes_to_insert;
+	    }
+	  else if ((mb_cur_max == 1 || rl_byte_oriented != 0) && *ols == 0 && lendiff > 0)
+	    {
+	      /* At the end of a line the characters do not have to
+		 be "inserted".  They can just be placed on the screen. */
+	      puts_face (nfd, nfdf, temp);
+	      _rl_last_c_pos += col_temp;
+	      return;
+	    }
+	  else	/* just write from first difference to end of new line */
+	    {
+	      puts_face (nfd, nfdf, temp);
+	      _rl_last_c_pos += col_temp;
+	      /* If nfd begins before the last invisible character in the
+		 prompt, adjust _rl_last_c_pos to account for wrap_offset
+		 and set cpos_adjusted to let the caller know. */
+	      if ((mb_cur_max > 1 && rl_byte_oriented == 0) && current_line == 0 && displaying_prompt_first_line && wrap_offset && ((nfd - new) <= prompt_last_invisible))
+		ADJUST_CPOS (wrap_offset);	/* XXX - prompt_invis_chars_first_line? */
+	      return;
+	    }
+
+	  if (bytes_to_insert > lendiff)
+	    {
+	      /* If nfd begins before the last invisible character in the
+		 prompt, adjust _rl_last_c_pos to account for wrap_offset
+		 and set cpos_adjusted to let the caller know. */
+	      if ((mb_cur_max > 1 && rl_byte_oriented == 0) && current_line == 0 && displaying_prompt_first_line && wrap_offset && ((nfd - new) <= prompt_last_invisible))
+		ADJUST_CPOS (wrap_offset);	/* XXX - prompt_invis_chars_first_line? */
+	    }
+	}
+      else
+	{
+	  /* cannot insert chars, write to EOL */
+	  puts_face (nfd, nfdf, temp);
+	  _rl_last_c_pos += col_temp;
+	  /* If we're in a multibyte locale and were before the last invisible
+	     char in the current line (which implies we just output some invisible
+	     characters) we need to adjust _rl_last_c_pos, since it represents
+	     a physical character position. */
+	  /* The current_line*rl_screenwidth+prompt_invis_chars_first_line is a
+	     crude attempt to compute how far into the new line buffer we are.
+	     It doesn't work well in the face of multibyte characters and needs
+	     to be rethought. XXX */
+	  if ((mb_cur_max > 1 && rl_byte_oriented == 0) &&
+		current_line == prompt_last_screen_line && wrap_offset &&
+		displaying_prompt_first_line &&
+		wrap_offset != prompt_invis_chars_first_line &&
+		((nfd-new) < (prompt_last_invisible-(current_line*_rl_screenwidth+prompt_invis_chars_first_line))))
+	    ADJUST_CPOS (wrap_offset - prompt_invis_chars_first_line);
+
+	  /* XXX - what happens if wrap_offset == prompt_invis_chars_first_line
+	     and we are drawing the first line (current_line == 0)? We should
+	     adjust by _rl_last_c_pos -= prompt_invis_chars_first_line */
+	}
+    }
+  else				/* Delete characters from line. */
+    {
+      /* If possible and inexpensive to use terminal deletion, then do so. */
+      if (_rl_term_dc && (2 * col_temp) >= -col_lendiff)
+	{
+	  /* If all we're doing is erasing the invisible characters in the
+	     prompt string, don't bother.  It screws up the assumptions
+	     about what's on the screen. */
+	  if (_rl_horizontal_scroll_mode && _rl_last_c_pos == 0 &&
+	      displaying_prompt_first_line &&
+	      -lendiff == visible_wrap_offset)
+	    col_lendiff = 0;
+
+	  /* If we have moved lmargin and we're shrinking the line, we've
+	     already moved the cursor to the first character of the new line,
+	     so deleting -col_lendiff characters will mess up the cursor
+	     position calculation */
+	  if (_rl_horizontal_scroll_mode && displaying_prompt_first_line == 0 &&
+		col_lendiff && _rl_last_c_pos < -col_lendiff)
+	    col_lendiff = 0;
+
+	  if (col_lendiff)
+	    delete_chars (-col_lendiff); /* delete (diff) characters */
+
+	  /* Copy (new) chars to screen from first diff to last match,
+	     overwriting what is there. */
+	  if (bytes_to_insert > 0)
+	    {
+	      /* If nfd begins at the prompt, or before the invisible
+		 characters in the prompt, we need to adjust _rl_last_c_pos
+		 in a multibyte locale to account for the wrap offset and
+		 set cpos_adjusted accordingly. */
+	      puts_face (nfd, nfdf, bytes_to_insert);
+	      if (mb_cur_max > 1 && rl_byte_oriented == 0)
+		{
+		  /* This still doesn't take into account whether or not the
+		     characters that this counts are invisible. */
+		  _rl_last_c_pos += _rl_col_width (nfd, 0, bytes_to_insert, 1);
+		  if (current_line == 0 && wrap_offset &&
+			displaying_prompt_first_line &&
+			prompt_invis_chars_first_line &&
+			_rl_last_c_pos >= prompt_invis_chars_first_line &&
+			((nfd - new) <= prompt_last_invisible))
+		    ADJUST_CPOS (prompt_invis_chars_first_line);
+
+#if 1
+#ifdef HANDLE_MULTIBYTE
+		  /* If we write a non-space into the last screen column,
+		     remove the note that we added a space to compensate for
+		     a multibyte double-width character that didn't fit, since
+		     it's only valid for what was previously there. */
+		  /* XXX - watch this */
+		  if (_rl_last_c_pos == _rl_screenwidth &&
+			line_state_invisible->wrapped_line[current_line+1] &&
+			nfd[bytes_to_insert-1] != ' ')
+		    line_state_invisible->wrapped_line[current_line+1] = 0;
+#endif
+#endif
+		}
+	      else
+		_rl_last_c_pos += bytes_to_insert;
+
+	      /* XXX - we only want to do this if we are at the end of the line
+		 so we move there with _rl_move_cursor_relative */
+	      if (_rl_horizontal_scroll_mode && ((oe-old) > (ne-new)))
+		{
+		  _rl_move_cursor_relative (ne-new, new, new_face);
+		  goto clear_rest_of_line;
+		}
+	    }
+	}
+      /* Otherwise, print over the existing material. */
+      else
+	{
+	  if (temp > 0)
+	    {
+	      /* If nfd begins at the prompt, or before the invisible
+		 characters in the prompt, we need to adjust _rl_last_c_pos
+		 in a multibyte locale to account for the wrap offset and
+		 set cpos_adjusted accordingly. */
+	      puts_face (nfd, nfdf, temp);
+	      _rl_last_c_pos += col_temp;		/* XXX */
+	      if (mb_cur_max > 1 && rl_byte_oriented == 0)
+		{
+		  if (current_line == 0 && wrap_offset &&
+			displaying_prompt_first_line &&
+			_rl_last_c_pos > wrap_offset &&
+			((nfd - new) <= prompt_last_invisible))
+		    ADJUST_CPOS (wrap_offset);	/* XXX - prompt_invis_chars_first_line? */
+		}
+	    }
+clear_rest_of_line:
+	  lendiff = (oe - old) - (ne - new);
+	  if (mb_cur_max > 1 && rl_byte_oriented == 0)
+	    col_lendiff = _rl_col_width (old, 0, oe - old, 1) - _rl_col_width (new, 0, ne - new, 1);
+	  else
+	    col_lendiff = lendiff;
+
+	  /* If we've already printed over the entire width of the screen,
+	     including the old material, then col_lendiff doesn't matter and
+	     space_to_eol will insert too many spaces.  XXX - maybe we should
+	     adjust col_lendiff based on the difference between _rl_last_c_pos
+	     and _rl_screenwidth */
+	  if (col_lendiff && ((mb_cur_max == 1 || rl_byte_oriented) || (_rl_last_c_pos < _rl_screenwidth)))
+	    {	  
+	      if (_rl_term_autowrap && current_line < inv_botlin)
+		space_to_eol (col_lendiff);
+	      else
+		_rl_clear_to_eol (col_lendiff);
+	    }
+	}
+    }
+}
+
+/* Tell the update routines that we have moved onto a new (empty) line. */
+int
+rl_on_new_line (void)
+{
+  if (visible_line)
+    visible_line[0] = '\0';
+
+  _rl_last_c_pos = _rl_last_v_pos = 0;
+  _rl_vis_botlin = last_lmargin = 0;
+  if (vis_lbreaks)
+    vis_lbreaks[0] = vis_lbreaks[1] = 0;
+  visible_wrap_offset = 0;
+  return 0;
+}
+
+/* Clear all screen lines occupied by the current readline line buffer
+   (visible line) */
+int
+rl_clear_visible_line (void)
+{
+  int curr_line;
+
+  /* Make sure we move to column 0 so we clear the entire line */
+  _rl_cr ();
+  _rl_last_c_pos = 0;
+
+  /* Move to the last screen line of the current visible line */
+  _rl_move_vert (_rl_vis_botlin);
+
+  /* And erase screen lines going up to line 0 (first visible line) */
+  for (curr_line = _rl_last_v_pos; curr_line >= 0; curr_line--)
+    {
+      _rl_move_vert (curr_line);
+      _rl_clear_to_eol (0);
+    }
+
+  return 0;
+}
+
+/* Tell the update routines that we have moved onto a new line with the
+   prompt already displayed.  Code originally from the version of readline
+   distributed with CLISP.  rl_expand_prompt must have already been called
+   (explicitly or implicitly).  This still doesn't work exactly right; it
+   should use expand_prompt() */
+int
+rl_on_new_line_with_prompt (void)
+{
+  int prompt_size, i, l, real_screenwidth, newlines;
+  char *prompt_last_line, *lprompt;
+
+  /* Initialize visible_line and invisible_line to ensure that they can hold
+     the already-displayed prompt. */
+  prompt_size = strlen (rl_prompt) + 1;
+  init_line_structures (prompt_size);
+
+  /* Make sure the line structures hold the already-displayed prompt for
+     redisplay. */
+  lprompt = local_prompt ? local_prompt : rl_prompt;
+  strcpy (visible_line, lprompt);
+  strcpy (invisible_line, lprompt);
+
+  /* If the prompt contains newlines, take the last tail. */
+  prompt_last_line = strrchr (rl_prompt, '\n');
+  if (!prompt_last_line)
+    prompt_last_line = rl_prompt;
+
+  l = strlen (prompt_last_line);
+  if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+    _rl_last_c_pos = _rl_col_width (prompt_last_line, 0, l, 1);	/* XXX */
+  else
+    _rl_last_c_pos = l;
+
+  /* Dissect prompt_last_line into screen lines. Note that here we have
+     to use the real screenwidth. Readline's notion of screenwidth might be
+     one less, see terminal.c. */
+  real_screenwidth = _rl_screenwidth + (_rl_term_autowrap ? 0 : 1);
+  _rl_last_v_pos = l / real_screenwidth;
+  /* If the prompt length is a multiple of real_screenwidth, we don't know
+     whether the cursor is at the end of the last line, or already at the
+     beginning of the next line. Output a newline just to be safe. */
+  if (l > 0 && (l % real_screenwidth) == 0)
+    _rl_output_some_chars ("\n", 1);
+  last_lmargin = 0;
+
+  newlines = 0; i = 0;
+  while (i <= l)
+    {
+      _rl_vis_botlin = newlines;
+      vis_lbreaks[newlines++] = i;
+      i += real_screenwidth;
+    }
+  vis_lbreaks[newlines] = l;
+  visible_wrap_offset = 0;
+
+  rl_display_prompt = rl_prompt;	/* XXX - make sure it's set */
+
+  return 0;
+}
+
+/* Actually update the display, period. */
+int
+rl_forced_update_display (void)
+{
+  register char *temp;
+
+  if (visible_line)
+    {
+      temp = visible_line;
+      while (*temp)
+	*temp++ = '\0';
+    }
+  rl_on_new_line ();
+  forced_display++;
+  (*rl_redisplay_function) ();
+  return 0;
+}
+
+/* Redraw only the last line of a multi-line prompt. */
+void
+rl_redraw_prompt_last_line (void)
+{
+  char *t;
+
+  t = strrchr (rl_display_prompt, '\n');
+  if (t)
+    redraw_prompt (++t);
+  else
+    rl_forced_update_display ();
+}
+
+/* Move the cursor from _rl_last_c_pos to NEW, which are buffer indices.
+   (Well, when we don't have multibyte characters, _rl_last_c_pos is a
+   buffer index.)
+   DATA is the contents of the screen line of interest; i.e., where
+   the movement is being done.
+   DATA is always the visible line or the invisible line */
+static void
+_rl_move_cursor_relative (int new, const char *data, const char *dataf)
+{
+  register int i;
+  int woff;			/* number of invisible chars on current line */
+  int cpos, dpos;		/* current and desired cursor positions */
+  int adjust;
+  int in_invisline;
+  int mb_cur_max = MB_CUR_MAX;
+
+  woff = WRAP_OFFSET (_rl_last_v_pos, wrap_offset);
+  cpos = _rl_last_c_pos;
+
+  if (cpos == 0 && cpos == new)
+    return;
+
+#if defined (HANDLE_MULTIBYTE)
+  /* If we have multibyte characters, NEW is indexed by the buffer point in
+     a multibyte string, but _rl_last_c_pos is the display position.  In
+     this case, NEW's display position is not obvious and must be
+     calculated.  We need to account for invisible characters in this line,
+     as long as we are past them and they are counted by _rl_col_width. */
+  if (mb_cur_max > 1 && rl_byte_oriented == 0)
+    {
+      adjust = 1;
+      /* Try to short-circuit common cases and eliminate a bunch of multibyte
+	 character function calls. */
+      /* 1.  prompt string */
+      if (new == local_prompt_len && memcmp (data, local_prompt, new) == 0)
+	{
+	  dpos = prompt_physical_chars;
+	  cpos_adjusted = 1;
+	  adjust = 0;
+	}
+      /* 2.  prompt_string + line contents */
+      else if (new > local_prompt_len && local_prompt && memcmp (data, local_prompt, local_prompt_len) == 0)
+	{
+	  dpos = prompt_physical_chars + _rl_col_width (data, local_prompt_len, new, 1);
+	  cpos_adjusted = 1;
+	  adjust = 0;
+	}
+      else
+        dpos = _rl_col_width (data, 0, new, 1);
+
+      if (displaying_prompt_first_line == 0)
+	adjust = 0;
+
+      /* yet another special case: printing the last line of a prompt with
+	 multibyte characters and invisible characters whose printable length
+	 exceeds the screen width with the last invisible character
+	 (prompt_last_invisible) in the last line.  IN_INVISLINE is the
+	 offset of DATA in invisible_line */
+      in_invisline = 0;
+      if (data > invisible_line && data < invisible_line+inv_lbreaks[_rl_inv_botlin+1])
+	in_invisline = data - invisible_line;
+
+      /* Use NEW when comparing against the last invisible character in the
+	 prompt string, since they're both buffer indices and DPOS is a
+	 desired display position. */
+      /* NEW is relative to the current displayed line, while
+	 PROMPT_LAST_INVISIBLE is relative to the entire (wrapped) line.
+	 Need a way to reconcile these two variables by turning NEW into a
+	 buffer position relative to the start of the line */
+      if (adjust && ((new > prompt_last_invisible) ||		/* XXX - don't use woff here */
+		     (new+in_invisline > prompt_last_invisible) ||	/* invisible line */
+	  (prompt_physical_chars >= _rl_screenwidth &&		/* visible line */
+	   _rl_last_v_pos == prompt_last_screen_line &&
+	   wrap_offset >= woff && dpos >= woff &&
+	   new > (prompt_last_invisible-(vis_lbreaks[_rl_last_v_pos])-wrap_offset))))
+	   /* XXX last comparison might need to be >= */
+	{
+	  dpos -= woff;
+	  /* Since this will be assigned to _rl_last_c_pos at the end (more
+	     precisely, _rl_last_c_pos == dpos when this function returns),
+	     let the caller know. */
+	  cpos_adjusted = 1;
+	}
+    }
+  else
+#endif
+    dpos = new;
+
+  /* If we don't have to do anything, then return. */
+  if (cpos == dpos)
+    return;
+
+  /* It may be faster to output a CR, and then move forwards instead
+     of moving backwards. */
+  /* i == current physical cursor position. */
+#if defined (HANDLE_MULTIBYTE)
+  if (mb_cur_max > 1 && rl_byte_oriented == 0)
+    i = _rl_last_c_pos;
+  else
+#endif
+  i = _rl_last_c_pos - woff;
+  if (dpos == 0 || CR_FASTER (dpos, _rl_last_c_pos) ||
+      (_rl_term_autowrap && i == _rl_screenwidth))
+    {
+      _rl_cr ();
+      cpos = _rl_last_c_pos = 0;
+    }
+
+  if (cpos < dpos)
+    {
+      /* Move the cursor forward.  We do it by printing the command
+	 to move the cursor forward if there is one, else print that
+	 portion of the output buffer again.  Which is cheaper? */
+
+      /* The above comment is left here for posterity.  It is faster
+	 to print one character (non-control) than to print a control
+	 sequence telling the terminal to move forward one character.
+	 That kind of control is for people who don't know what the
+	 data is underneath the cursor. */
+
+      /* However, we need a handle on where the current display position is
+	 in the buffer for the immediately preceding comment to be true.
+	 In multibyte locales, we don't currently have that info available.
+	 Without it, we don't know where the data we have to display begins
+	 in the buffer and we have to go back to the beginning of the screen
+	 line.  In this case, we can use the terminal sequence to move forward
+	 if it's available. */
+      if (mb_cur_max > 1 && rl_byte_oriented == 0)
+	{
+	  if (_rl_term_forward_char)
+	    {
+	      for (i = cpos; i < dpos; i++)
+	        tputs (_rl_term_forward_char, 1, _rl_output_character_function);
+	    }
+	  else
+	    {
+	      _rl_cr ();
+	      puts_face (data, dataf, new);
+	    }
+	}
+      else
+	puts_face (data + cpos, dataf + cpos, new - cpos);
+    }
+
+#if defined (HANDLE_MULTIBYTE)
+  /* NEW points to the buffer point, but _rl_last_c_pos is the display point.
+     The byte length of the string is probably bigger than the column width
+     of the string, which means that if NEW == _rl_last_c_pos, then NEW's
+     display point is less than _rl_last_c_pos. */
+#endif
+  else if (cpos > dpos)
+    _rl_backspace (cpos - dpos);
+
+  _rl_last_c_pos = dpos;
+}
+
+/* PWP: move the cursor up or down. */
+void
+_rl_move_vert (int to)
+{
+  register int delta, i;
+
+  if (_rl_last_v_pos == to || to > _rl_screenheight)
+    return;
+
+  if ((delta = to - _rl_last_v_pos) > 0)
+    {
+      for (i = 0; i < delta; i++)
+	putc ('\n', rl_outstream);
+      _rl_cr ();
+      _rl_last_c_pos = 0;
+    }
+  else
+    {			/* delta < 0 */
+#ifdef __DJGPP__
+      int row, col;
+
+      fflush (rl_outstream);
+      ScreenGetCursor (&row, &col);
+      ScreenSetCursor (row + delta, col);
+      i = -delta;
+#else
+      if (_rl_term_up && *_rl_term_up)
+	for (i = 0; i < -delta; i++)
+	  tputs (_rl_term_up, 1, _rl_output_character_function);
+#endif /* !__DJGPP__ */
+    }
+
+  _rl_last_v_pos = to;		/* Now TO is here */
+}
+
+/* Physically print C on rl_outstream.  This is for functions which know
+   how to optimize the display.  Return the number of characters output. */
+int
+rl_show_char (int c)
+{
+  int n = 1;
+  if (META_CHAR (c) && (_rl_output_meta_chars == 0))
+    {
+      fprintf (rl_outstream, "M-");
+      n += 2;
+      c = UNMETA (c);
+    }
+
+#if defined (DISPLAY_TABS)
+  if ((CTRL_CHAR (c) && c != '\t') || c == RUBOUT)
+#else
+  if (CTRL_CHAR (c) || c == RUBOUT)
+#endif /* !DISPLAY_TABS */
+    {
+      fprintf (rl_outstream, "C-");
+      n += 2;
+      c = CTRL_CHAR (c) ? UNCTRL (c) : '?';
+    }
+
+  putc (c, rl_outstream);
+  fflush (rl_outstream);
+  return n;
+}
+
+int
+rl_character_len (int c, int pos)
+{
+  unsigned char uc;
+
+  uc = (unsigned char)c;
+
+  if (META_CHAR (uc))
+    return ((_rl_output_meta_chars == 0) ? 4 : 1);
+
+  if (uc == '\t')
+    {
+#if defined (DISPLAY_TABS)
+      return (((pos | 7) + 1) - pos);
+#else
+      return (2);
+#endif /* !DISPLAY_TABS */
+    }
+
+  if (CTRL_CHAR (c) || c == RUBOUT)
+    return (2);
+
+  return ((ISPRINT (uc)) ? 1 : 2);
+}
+/* How to print things in the "echo-area".  The prompt is treated as a
+   mini-modeline. */
+static int msg_saved_prompt = 0;
+
+#if defined (USE_VARARGS)
+int
+#if defined (PREFER_STDARG)
+rl_message (const char *format, ...)
+#else
+rl_message (va_alist)
+     va_dcl
+#endif
+{
+  va_list args;
+#if defined (PREFER_VARARGS)
+  char *format;
+#endif
+#if defined (HAVE_VSNPRINTF)
+  int bneed;
+#endif
+
+#if defined (PREFER_STDARG)
+  va_start (args, format);
+#else
+  va_start (args);
+  format = va_arg (args, char *);
+#endif
+
+  if (msg_buf == 0)
+    msg_buf = xmalloc (msg_bufsiz = 128);
+
+#if defined (HAVE_VSNPRINTF)
+  bneed = vsnprintf (msg_buf, msg_bufsiz, format, args);
+  if (bneed >= msg_bufsiz - 1)
+    {
+      msg_bufsiz = bneed + 1;
+      msg_buf = xrealloc (msg_buf, msg_bufsiz);
+      va_end (args);
+
+#if defined (PREFER_STDARG)
+      va_start (args, format);
+#else
+      va_start (args);
+      format = va_arg (args, char *);
+#endif
+      vsnprintf (msg_buf, msg_bufsiz - 1, format, args);
+    }
+#else
+  vsprintf (msg_buf, format, args);
+  msg_buf[msg_bufsiz - 1] = '\0';	/* overflow? */
+#endif
+  va_end (args);
+
+  if (saved_local_prompt == 0)
+    {
+      rl_save_prompt ();
+      msg_saved_prompt = 1;
+    }
+  else if (local_prompt != saved_local_prompt)
+    {
+      FREE (local_prompt);
+      FREE (local_prompt_prefix);
+      local_prompt = (char *)NULL;
+    }
+  rl_display_prompt = msg_buf;
+  local_prompt = expand_prompt (msg_buf, 0, &prompt_visible_length,
+					    &prompt_last_invisible,
+					    &prompt_invis_chars_first_line,
+					    &prompt_physical_chars);
+  local_prompt_prefix = (char *)NULL;
+  local_prompt_len = local_prompt ? strlen (local_prompt) : 0;
+  (*rl_redisplay_function) ();
+
+  return 0;
+}
+#else /* !USE_VARARGS */
+int
+rl_message (format, arg1, arg2)
+     char *format;
+{
+  if (msg_buf == 0)
+    msg_buf = xmalloc (msg_bufsiz = 128);
+
+  sprintf (msg_buf, format, arg1, arg2);
+  msg_buf[msg_bufsiz - 1] = '\0';	/* overflow? */
+
+  rl_display_prompt = msg_buf;
+  if (saved_local_prompt == 0)
+    {
+      rl_save_prompt ();
+      msg_saved_prompt = 1;
+    }
+  else if (local_prompt != saved_local_prompt)
+    {
+      FREE (local_prompt);
+      FREE (local_prompt_prefix);
+      local_prompt = (char *)NULL;
+    }
+  local_prompt = expand_prompt (msg_buf, 0, &prompt_visible_length,
+					    &prompt_last_invisible,
+					    &prompt_invis_chars_first_line,
+					    &prompt_physical_chars);
+  local_prompt_prefix = (char *)NULL;
+  local_prompt_len = local_prompt ? strlen (local_prompt) : 0;
+  (*rl_redisplay_function) ();
+      
+  return 0;
+}
+#endif /* !USE_VARARGS */
+
+/* How to clear things from the "echo-area". */
+int
+rl_clear_message (void)
+{
+  rl_display_prompt = rl_prompt;
+  if (msg_saved_prompt)
+    {
+      rl_restore_prompt ();
+      msg_saved_prompt = 0;
+    }
+  (*rl_redisplay_function) ();
+  return 0;
+}
+
+int
+rl_reset_line_state (void)
+{
+  rl_on_new_line ();
+
+  rl_display_prompt = rl_prompt ? rl_prompt : "";
+  forced_display = 1;
+  return 0;
+}
+
+/* Save all of the variables associated with the prompt and its display. Most
+   of the complexity is dealing with the invisible characters in the prompt
+   string and where they are. There are enough of these that I should consider
+   a struct. */
+void
+rl_save_prompt (void)
+{
+  saved_local_prompt = local_prompt;
+  saved_local_prefix = local_prompt_prefix;
+  saved_prefix_length = prompt_prefix_length;
+  saved_local_length = local_prompt_len;
+  saved_last_invisible = prompt_last_invisible;
+  saved_visible_length = prompt_visible_length;
+  saved_invis_chars_first_line = prompt_invis_chars_first_line;
+  saved_physical_chars = prompt_physical_chars;
+  saved_local_prompt_newlines = local_prompt_newlines;
+
+  local_prompt = local_prompt_prefix = (char *)0;
+  local_prompt_len = 0;
+  local_prompt_newlines = (int *)0;
+
+  prompt_last_invisible = prompt_visible_length = prompt_prefix_length = 0;
+  prompt_invis_chars_first_line = prompt_physical_chars = 0;
+}
+
+void
+rl_restore_prompt (void)
+{
+  FREE (local_prompt);
+  FREE (local_prompt_prefix);
+  FREE (local_prompt_newlines);
+
+  local_prompt = saved_local_prompt;
+  local_prompt_prefix = saved_local_prefix;
+  local_prompt_len = saved_local_length;
+  local_prompt_newlines = saved_local_prompt_newlines;
+
+  prompt_prefix_length = saved_prefix_length;
+  prompt_last_invisible = saved_last_invisible;
+  prompt_visible_length = saved_visible_length;
+  prompt_invis_chars_first_line = saved_invis_chars_first_line;
+  prompt_physical_chars = saved_physical_chars;
+
+  /* can test saved_local_prompt to see if prompt info has been saved. */
+  saved_local_prompt = saved_local_prefix = (char *)0;
+  saved_local_length = 0;
+  saved_last_invisible = saved_visible_length = saved_prefix_length = 0;
+  saved_invis_chars_first_line = saved_physical_chars = 0;
+  saved_local_prompt_newlines = 0;
+}
+
+char *
+_rl_make_prompt_for_search (int pchar)
+{
+  int len;
+  char *pmt, *p;
+
+  rl_save_prompt ();
+
+  /* We've saved the prompt, and can do anything with the various prompt
+     strings we need before they're restored.  We want the unexpanded
+     portion of the prompt string after any final newline. */
+  p = rl_prompt ? strrchr (rl_prompt, '\n') : 0;
+  if (p == 0)
+    {
+      len = (rl_prompt && *rl_prompt) ? strlen (rl_prompt) : 0;
+      pmt = (char *)xmalloc (len + 2);
+      if (len)
+	strcpy (pmt, rl_prompt);
+      pmt[len] = pchar;
+      pmt[len+1] = '\0';
+    }
+  else
+    {
+      p++;
+      len = strlen (p);
+      pmt = (char *)xmalloc (len + 2);
+      if (len)
+	strcpy (pmt, p);
+      pmt[len] = pchar;
+      pmt[len+1] = '\0';
+    }  
+
+  /* will be overwritten by expand_prompt, called from rl_message */
+  prompt_physical_chars = saved_physical_chars + 1;
+  return pmt;
+}
+
+/* Quick redisplay hack when erasing characters at the end of the line. */
+void
+_rl_erase_at_end_of_line (int l)
+{
+  register int i;
+
+  _rl_backspace (l);
+  for (i = 0; i < l; i++)
+    putc (' ', rl_outstream);
+  _rl_backspace (l);
+  for (i = 0; i < l; i++)
+    visible_line[--_rl_last_c_pos] = '\0';
+  rl_display_fixed++;
+}
+
+/* Clear to the end of the line.  COUNT is the minimum
+   number of character spaces to clear, but we use a terminal escape
+   sequence if available. */
+void
+_rl_clear_to_eol (int count)
+{
+#ifndef __MSDOS__
+  if (_rl_term_clreol)
+    tputs (_rl_term_clreol, 1, _rl_output_character_function);
+  else
+#endif
+    if (count)
+      space_to_eol (count);
+}
+
+/* Clear to the end of the line using spaces.  COUNT is the minimum
+   number of character spaces to clear, */
+static void
+space_to_eol (int count)
+{
+  register int i;
+
+  for (i = 0; i < count; i++)
+    putc (' ', rl_outstream);
+
+  _rl_last_c_pos += count;
+}
+
+void
+_rl_clear_screen (int clrscr)
+{
+#if defined (__DJGPP__)
+  ScreenClear ();
+  ScreenSetCursor (0, 0);
+#else
+  if (_rl_term_clrpag)
+    {
+      tputs (_rl_term_clrpag, 1, _rl_output_character_function);
+      if (clrscr && _rl_term_clrscroll)
+	tputs (_rl_term_clrscroll, 1, _rl_output_character_function);
+    }
+  else
+    rl_crlf ();
+#endif /* __DJGPP__ */
+}
+
+/* Insert COUNT characters from STRING to the output stream at column COL. */
+static void
+insert_some_chars (char *string, int count, int col)
+{
+  open_some_spaces (col);
+  _rl_output_some_chars (string, count);
+}
+
+/* Insert COL spaces, keeping the cursor at the same position.  We follow the
+   ncurses documentation and use either im/ei with explicit spaces, or IC/ic
+   by itself.  We assume there will either be ei or we don't need to use it. */
+static void
+open_some_spaces (int col)
+{
+#if !defined (__MSDOS__) && (!defined (__MINGW32__) || defined (NCURSES_VERSION))
+  char *buffer;
+  register int i;
+
+  /* If IC is defined, then we do not have to "enter" insert mode. */
+  if (_rl_term_IC)
+    {
+      buffer = tgoto (_rl_term_IC, 0, col);
+      tputs (buffer, 1, _rl_output_character_function);
+    }
+  else if (_rl_term_im && *_rl_term_im)
+    {
+      tputs (_rl_term_im, 1, _rl_output_character_function);
+      /* just output the desired number of spaces */
+      for (i = col; i--; )
+	_rl_output_character_function (' ');
+      /* If there is a string to turn off insert mode, use it now. */
+      if (_rl_term_ei && *_rl_term_ei)
+	tputs (_rl_term_ei, 1, _rl_output_character_function);
+      /* and move back the right number of spaces */
+      _rl_backspace (col);
+    }
+  else if (_rl_term_ic && *_rl_term_ic)
+    {
+      /* If there is a special command for inserting characters, then
+	 use that first to open up the space. */
+      for (i = col; i--; )
+	tputs (_rl_term_ic, 1, _rl_output_character_function);
+    }
+#endif /* !__MSDOS__ && (!__MINGW32__ || NCURSES_VERSION)*/
+}
+
+/* Delete COUNT characters from the display line. */
+static void
+delete_chars (int count)
+{
+  if (count > _rl_screenwidth)	/* XXX */
+    return;
+
+#if !defined (__MSDOS__) && (!defined (__MINGW32__) || defined (NCURSES_VERSION))
+  if (_rl_term_DC && *_rl_term_DC)
+    {
+      char *buffer;
+      buffer = tgoto (_rl_term_DC, count, count);
+      tputs (buffer, count, _rl_output_character_function);
+    }
+  else
+    {
+      if (_rl_term_dc && *_rl_term_dc)
+	while (count--)
+	  tputs (_rl_term_dc, 1, _rl_output_character_function);
+    }
+#endif /* !__MSDOS__ && (!__MINGW32__ || NCURSES_VERSION)*/
+}
+
+void
+_rl_update_final (void)
+{
+  int full_lines, woff, botline_length;
+
+  if (line_structures_initialized == 0)
+    return;
+
+  full_lines = 0;
+  /* If the cursor is the only thing on an otherwise-blank last line,
+     compensate so we don't print an extra CRLF. */
+  if (_rl_vis_botlin && _rl_last_c_pos == 0 &&
+	visible_line[vis_lbreaks[_rl_vis_botlin]] == 0)
+    {
+      _rl_vis_botlin--;
+      full_lines = 1;
+    }
+  _rl_move_vert (_rl_vis_botlin);
+  woff = W_OFFSET(_rl_vis_botlin, wrap_offset);
+  botline_length = VIS_LLEN(_rl_vis_botlin) - woff;
+  /* If we've wrapped lines, remove the final xterm line-wrap flag. */
+  if (full_lines && _rl_term_autowrap && botline_length == _rl_screenwidth)
+    {
+      char *last_line, *last_face;
+
+      /* LAST_LINE includes invisible characters, so if you want to get the
+	 last character of the first line, you have to take WOFF into account.
+	 This needs to be done for both calls to _rl_move_cursor_relative,
+	 which takes a buffer position as the first argument, and any direct
+	 subscripts of LAST_LINE. */
+      last_line = &visible_line[vis_lbreaks[_rl_vis_botlin]]; /* = VIS_CHARS(_rl_vis_botlin); */
+      last_face = &vis_face[vis_lbreaks[_rl_vis_botlin]]; /* = VIS_CHARS(_rl_vis_botlin); */
+      cpos_buffer_position = -1;	/* don't know where we are in buffer */
+      _rl_move_cursor_relative (_rl_screenwidth - 1 + woff, last_line, last_face);	/* XXX */
+      _rl_clear_to_eol (0);
+      puts_face (&last_line[_rl_screenwidth - 1 + woff],
+		 &last_face[_rl_screenwidth - 1 + woff], 1);
+    }
+  _rl_vis_botlin = 0;
+  if (botline_length > 0 || _rl_last_c_pos > 0)
+    rl_crlf ();
+  fflush (rl_outstream);
+  rl_display_fixed++;
+}
+
+/* Move to the start of the current line. */
+static void
+cr (void)
+{
+  _rl_cr ();
+  _rl_last_c_pos = 0;
+}
+
+/* Redraw the last line of a multi-line prompt that may possibly contain
+   terminal escape sequences.  Called with the cursor at column 0 of the
+   line to draw the prompt on. */
+static void
+redraw_prompt (char *t)
+{
+  char *oldp;
+
+  oldp = rl_display_prompt;
+  rl_save_prompt ();
+
+  rl_display_prompt = t;
+  local_prompt = expand_prompt (t, PMT_MULTILINE,
+				   &prompt_visible_length,
+				   &prompt_last_invisible,
+				   &prompt_invis_chars_first_line,
+				   &prompt_physical_chars);
+  local_prompt_prefix = (char *)NULL;
+  local_prompt_len = local_prompt ? strlen (local_prompt) : 0;
+
+  rl_forced_update_display ();
+
+  rl_display_prompt = oldp;
+  rl_restore_prompt();
+}
+      
+/* Redisplay the current line after a SIGWINCH is received. */
+void
+_rl_redisplay_after_sigwinch (void)
+{
+  char *t;
+
+  /* Clear the last line (assuming that the screen size change will result in
+     either more or fewer characters on that line only) and put the cursor at
+     column 0.  Make sure the right thing happens if we have wrapped to a new
+     screen line. */
+  if (_rl_term_cr)
+    {
+      _rl_move_vert (_rl_vis_botlin);
+
+      _rl_cr ();
+      _rl_last_c_pos = 0;
+
+#if !defined (__MSDOS__)
+      if (_rl_term_clreol)
+	tputs (_rl_term_clreol, 1, _rl_output_character_function);
+      else
+#endif
+	{
+	  space_to_eol (_rl_screenwidth);
+	  _rl_cr ();
+	}
+
+      if (_rl_last_v_pos > 0)
+	_rl_move_vert (0);
+    }
+  else
+    rl_crlf ();
+
+  /* Redraw only the last line of a multi-line prompt. */
+  t = strrchr (rl_display_prompt, '\n');
+  if (t)
+    redraw_prompt (++t);
+  else
+    rl_forced_update_display ();
+}
+
+void
+_rl_clean_up_for_exit (void)
+{
+  if (_rl_echoing_p)
+    {
+      if (_rl_vis_botlin > 0)	/* minor optimization plus bug fix */
+	_rl_move_vert (_rl_vis_botlin);
+      _rl_vis_botlin = 0;
+      fflush (rl_outstream);
+      rl_restart_output (1, 0);
+    }
+}
+
+void
+_rl_erase_entire_line (void)
+{
+  cr ();
+  _rl_clear_to_eol (0);
+  cr ();
+  fflush (rl_outstream);
+}
+
+void
+_rl_ttyflush (void)
+{
+  fflush (rl_outstream);
+}
+
+/* return the `current display line' of the cursor -- the number of lines to
+   move up to get to the first screen line of the current readline line. */
+int
+_rl_current_display_line (void)
+{
+  int ret, nleft;
+
+  /* Find out whether or not there might be invisible characters in the
+     editing buffer. */
+  if (rl_display_prompt == rl_prompt)
+    nleft = _rl_last_c_pos - _rl_screenwidth - rl_visible_prompt_length;
+  else
+    nleft = _rl_last_c_pos - _rl_screenwidth;
+
+  if (nleft > 0)
+    ret = 1 + nleft / _rl_screenwidth;
+  else
+    ret = 0;
+
+  return ret;
+}
+
+void
+_rl_refresh_line (void)
+{
+  rl_clear_visible_line ();
+  rl_redraw_prompt_last_line ();
+  rl_keep_mark_active ();
+}
+
+#if defined (HANDLE_MULTIBYTE)
+/* Calculate the number of screen columns occupied by STR from START to END.
+   In the case of multibyte characters with stateful encoding, we have to
+   scan from the beginning of the string to take the state into account. */
+static int
+_rl_col_width (const char *str, int start, int end, int flags)
+{
+  wchar_t wc;
+  mbstate_t ps;
+  int tmp, point, width, max;
+
+  if (end <= start)
+    return 0;
+  if (MB_CUR_MAX == 1 || rl_byte_oriented)
+    /* this can happen in some cases where it's inconvenient to check */
+    return (end - start);
+
+  memset (&ps, 0, sizeof (mbstate_t));
+
+  point = 0;
+  max = end;
+
+  /* Try to short-circuit common cases.  The adjustment to remove wrap_offset
+     is done by the caller. */
+  /* 1.  prompt string */
+  if (flags && start == 0 && end == local_prompt_len && memcmp (str, local_prompt, local_prompt_len) == 0)
+    return (prompt_physical_chars + wrap_offset);
+  /* 2.  prompt string + line contents */
+  else if (flags && start == 0 && local_prompt_len > 0 && end > local_prompt_len && local_prompt && memcmp (str, local_prompt, local_prompt_len) == 0)
+    {
+      tmp = prompt_physical_chars + wrap_offset;
+      /* XXX - try to call ourselves recursively with non-prompt portion */
+      tmp += _rl_col_width (str, local_prompt_len, end, flags);
+      return (tmp);
+    }
+
+  while (point < start)
+    {
+      if (_rl_utf8locale && UTF8_SINGLEBYTE(str[point]))
+	{
+	  memset (&ps, 0, sizeof (mbstate_t));
+	  tmp = 1;
+	}
+      else
+	tmp = mbrlen (str + point, max, &ps);
+      if (MB_INVALIDCH ((size_t)tmp))
+	{
+	  /* In this case, the bytes are invalid or too short to compose a
+	     multibyte character, so we assume that the first byte represents
+	     a single character. */
+	  point++;
+	  max--;
+
+	  /* Clear the state of the byte sequence, because in this case the
+	     effect of mbstate is undefined. */
+	  memset (&ps, 0, sizeof (mbstate_t));
+	}
+      else if (MB_NULLWCH (tmp))
+	break;		/* Found '\0' */
+      else
+	{
+	  point += tmp;
+	  max -= tmp;
+	}
+    }
+
+  /* If START is not a byte that starts a character, then POINT will be
+     greater than START.  In this case, assume that (POINT - START) gives
+     a byte count that is the number of columns of difference. */
+  width = point - start;
+
+  while (point < end)
+    {
+      if (_rl_utf8locale && UTF8_SINGLEBYTE(str[point]))
+	{
+	  tmp = 1;
+	  wc = (wchar_t) str[point];
+	}
+      else
+	tmp = mbrtowc (&wc, str + point, max, &ps);
+      if (MB_INVALIDCH ((size_t)tmp))
+	{
+	  /* In this case, the bytes are invalid or too short to compose a
+	     multibyte character, so we assume that the first byte represents
+	     a single character. */
+	  point++;
+	  max--;
+
+	  /* and assume that the byte occupies a single column. */
+	  width++;
+
+	  /* Clear the state of the byte sequence, because in this case the
+	     effect of mbstate is undefined. */
+	  memset (&ps, 0, sizeof (mbstate_t));
+	}
+      else if (MB_NULLWCH (tmp))
+	break;			/* Found '\0' */
+      else
+	{
+	  point += tmp;
+	  max -= tmp;
+	  tmp = WCWIDTH(wc);
+	  width += (tmp >= 0) ? tmp : 1;
+	}
+    }
+
+  width += point - end;
+
+  return width;
+}
+#endif /* HANDLE_MULTIBYTE */
diff --git a/lib/readline/doc/Makefile b/lib/readline/doc/Makefile
new file mode 100644
index 0000000..af5ee3e
--- /dev/null
+++ b/lib/readline/doc/Makefile
@@ -0,0 +1,145 @@
+# Derived by hand from the generated readline-src/doc/Makefile
+# This makefile for Readline library documentation is in -*- text -*- mode.
+# Emacs likes it that way.
+
+#   Copyright (C) 1996-2002 Free Software Foundation, Inc.
+#
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+
+topdir = .
+srcdir = .
+VPATH = .
+
+prefix = /usr/local
+infodir = ${prefix}/info
+
+mandir = ${prefix}/man
+manpfx = man
+
+man1ext = 1
+man1dir = $(mandir)/$(manpfx)$(man1ext)
+man3ext = 3
+man3dir = $(mandir)/$(manpfx)$(man3ext)
+
+SHELL = /bin/sh
+RM = rm -f
+
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+
+BUILD_DIR = .
+TEXINPUTDIR = $(srcdir)
+
+MAKEINFO    = LANGUAGE= makeinfo
+TEXI2DVI    = $(srcdir)/texi2dvi
+TEXI2HTML   = $(srcdir)/texi2html
+QUIETPS     = #set this to -q to shut up dvips
+PSDPI       = 300	# I don't have any 600-dpi printers
+DVIPS       = dvips -D ${PSDPI} $(QUIETPS) -o $@     # tricky
+
+RLSRC = $(srcdir)/rlman.texi $(srcdir)/rluser.texi \
+	$(srcdir)/rltech.texi $(srcdir)/version.texi \
+	$(srcdir)/rluserman.texi
+HISTSRC = $(srcdir)/history.texi $(srcdir)/hsuser.texi \
+	  $(srcdir)/hstech.texi $(srcdir)/version.texi
+
+# This should be a program that converts troff to an ascii-readable format
+NROFF       = groff -Tascii
+
+# This should be a program that converts troff to postscript
+GROFF       = groff
+
+DVIOBJ = readline.dvi history.dvi rluserman.dvi
+INFOOBJ = readline.info history.info rluserman.info
+PSOBJ = readline.ps history.ps rluserman.ps
+HTMLOBJ = readline.html history.html rluserman.html
+
+INTERMEDIATE_OBJ = rlman.dvi
+
+CREATED_DOCS = $(DVIOBJ) $(INFOOBJ) $(PSOBJ) $(HTMLOBJ)
+
+.SUFFIXES:      .ps .txt .dvi
+
+all: info dvi html ps 
+nodvi: info html
+
+readline.dvi: $(RLSRC)
+	TEXINPUTS=.:$(TEXINPUTDIR):$$TEXINPUTS $(TEXI2DVI) $(srcdir)/rlman.texi
+	mv rlman.dvi readline.dvi
+
+readline.info: $(RLSRC)
+	$(MAKEINFO) --no-split -I $(TEXINPUTDIR) -o $@ $(srcdir)/rlman.texi
+
+rluserman.dvi: $(RLSRC)
+	TEXINPUTS=.:$(TEXINPUTDIR):$$TEXINPUTS $(TEXI2DVI) $(srcdir)/rluserman.texi
+
+rluserman.info: $(RLSRC)
+	$(MAKEINFO) --no-split -I $(TEXINPUTDIR) -o $@ $(srcdir)/rluserman.texi
+
+history.dvi: ${HISTSRC}
+	TEXINPUTS=.:$(TEXINPUTDIR):$$TEXINPUTS $(TEXI2DVI) $(srcdir)/history.texi
+
+history.info: ${HISTSRC}
+	$(MAKEINFO) --no-split -I $(TEXINPUTDIR) -o $@ $(srcdir)/history.texi
+
+readline.ps:	readline.dvi
+	$(RM) $@
+	$(DVIPS) readline.dvi
+
+rluserman.ps:	rluserman.dvi
+	$(RM) $@
+	$(DVIPS) rluserman.dvi
+
+history.ps:	history.dvi
+	$(RM) $@
+	$(DVIPS) history.dvi
+
+readline.html:	${RLSRC}
+	$(TEXI2HTML) -menu -monolithic -I $(TEXINPUTDIR) $(srcdir)/rlman.texi
+	sed -e 's:rlman.html:readline.html:' rlman.html > readline.html
+	$(RM) rlman.html
+
+rluserman.html:	${RLSRC}
+	$(TEXI2HTML) -menu -monolithic -I $(TEXINPUTDIR) $(srcdir)/rluserman.texi
+
+history.html:	${HISTSRC}
+	$(TEXI2HTML) -menu -monolithic -I $(TEXINPUTDIR) $(srcdir)/history.texi
+
+info:	$(INFOOBJ)
+dvi:	$(DVIOBJ)
+ps:	$(PSOBJ)
+html:	$(HTMLOBJ)
+
+clean:
+	$(RM) *.aux *.cp *.fn *.ky *.log *.pg *.toc *.tp *.vr *.cps *.pgs \
+	      *.fns *.kys *.tps *.vrs *.o core
+
+distclean: clean
+	$(RM) $(CREATED_DOCS)
+	$(RM) $(INTERMEDIATE_OBJ)
+	$(RM) Makefile
+
+mostlyclean: clean
+
+maintainer-clean: clean
+	$(RM) $(CREATED_DOCS)
+	$(RM) $(INTERMEDIATE_OBJ)
+	$(RM) Makefile
+
+install:
+	@echo "This documentation should not be installed."
+
+uninstall:
diff --git a/lib/readline/doc/fdl.texi b/lib/readline/doc/fdl.texi
new file mode 100644
index 0000000..8805f1a
--- /dev/null
+++ b/lib/readline/doc/fdl.texi
@@ -0,0 +1,506 @@
+@c The GNU Free Documentation License.
+@center Version 1.3, 3 November 2008
+
+@c This file is intended to be included within another document,
+@c hence no sectioning command or @node.
+
+@display
+Copyright @copyright{} 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc.
+@uref{http://fsf.org/}
+
+Everyone is permitted to copy and distribute verbatim copies
+of this license document, but changing it is not allowed.
+@end display
+
+@enumerate 0
+@item
+PREAMBLE
+
+The purpose of this License is to make a manual, textbook, or other
+functional and useful document @dfn{free} in the sense of freedom: to
+assure everyone the effective freedom to copy and redistribute it,
+with or without modifying it, either commercially or noncommercially.
+Secondarily, this License preserves for the author and publisher a way
+to get credit for their work, while not being considered responsible
+for modifications made by others.
+
+This License is a kind of ``copyleft'', which means that derivative
+works of the document must themselves be free in the same sense.  It
+complements the GNU General Public License, which is a copyleft
+license designed for free software.
+
+We have designed this License in order to use it for manuals for free
+software, because free software needs free documentation: a free
+program should come with manuals providing the same freedoms that the
+software does.  But this License is not limited to software manuals;
+it can be used for any textual work, regardless of subject matter or
+whether it is published as a printed book.  We recommend this License
+principally for works whose purpose is instruction or reference.
+
+@item
+APPLICABILITY AND DEFINITIONS
+
+This License applies to any manual or other work, in any medium, that
+contains a notice placed by the copyright holder saying it can be
+distributed under the terms of this License.  Such a notice grants a
+world-wide, royalty-free license, unlimited in duration, to use that
+work under the conditions stated herein.  The ``Document'', below,
+refers to any such manual or work.  Any member of the public is a
+licensee, and is addressed as ``you''.  You accept the license if you
+copy, modify or distribute the work in a way requiring permission
+under copyright law.
+
+A ``Modified Version'' of the Document means any work containing the
+Document or a portion of it, either copied verbatim, or with
+modifications and/or translated into another language.
+
+A ``Secondary Section'' is a named appendix or a front-matter section
+of the Document that deals exclusively with the relationship of the
+publishers or authors of the Document to the Document's overall
+subject (or to related matters) and contains nothing that could fall
+directly within that overall subject.  (Thus, if the Document is in
+part a textbook of mathematics, a Secondary Section may not explain
+any mathematics.)  The relationship could be a matter of historical
+connection with the subject or with related matters, or of legal,
+commercial, philosophical, ethical or political position regarding
+them.
+
+The ``Invariant Sections'' are certain Secondary Sections whose titles
+are designated, as being those of Invariant Sections, in the notice
+that says that the Document is released under this License.  If a
+section does not fit the above definition of Secondary then it is not
+allowed to be designated as Invariant.  The Document may contain zero
+Invariant Sections.  If the Document does not identify any Invariant
+Sections then there are none.
+
+The ``Cover Texts'' are certain short passages of text that are listed,
+as Front-Cover Texts or Back-Cover Texts, in the notice that says that
+the Document is released under this License.  A Front-Cover Text may
+be at most 5 words, and a Back-Cover Text may be at most 25 words.
+
+A ``Transparent'' copy of the Document means a machine-readable copy,
+represented in a format whose specification is available to the
+general public, that is suitable for revising the document
+straightforwardly with generic text editors or (for images composed of
+pixels) generic paint programs or (for drawings) some widely available
+drawing editor, and that is suitable for input to text formatters or
+for automatic translation to a variety of formats suitable for input
+to text formatters.  A copy made in an otherwise Transparent file
+format whose markup, or absence of markup, has been arranged to thwart
+or discourage subsequent modification by readers is not Transparent.
+An image format is not Transparent if used for any substantial amount
+of text.  A copy that is not ``Transparent'' is called ``Opaque''.
+
+Examples of suitable formats for Transparent copies include plain
+@sc{ascii} without markup, Texinfo input format, La@TeX{} input
+format, @acronym{SGML} or @acronym{XML} using a publicly available
+@acronym{DTD}, and standard-conforming simple @acronym{HTML},
+PostScript or @acronym{PDF} designed for human modification.  Examples
+of transparent image formats include @acronym{PNG}, @acronym{XCF} and
+@acronym{JPG}.  Opaque formats include proprietary formats that can be
+read and edited only by proprietary word processors, @acronym{SGML} or
+@acronym{XML} for which the @acronym{DTD} and/or processing tools are
+not generally available, and the machine-generated @acronym{HTML},
+PostScript or @acronym{PDF} produced by some word processors for
+output purposes only.
+
+The ``Title Page'' means, for a printed book, the title page itself,
+plus such following pages as are needed to hold, legibly, the material
+this License requires to appear in the title page.  For works in
+formats which do not have any title page as such, ``Title Page'' means
+the text near the most prominent appearance of the work's title,
+preceding the beginning of the body of the text.
+
+The ``publisher'' means any person or entity that distributes copies
+of the Document to the public.
+
+A section ``Entitled XYZ'' means a named subunit of the Document whose
+title either is precisely XYZ or contains XYZ in parentheses following
+text that translates XYZ in another language.  (Here XYZ stands for a
+specific section name mentioned below, such as ``Acknowledgements'',
+``Dedications'', ``Endorsements'', or ``History''.)  To ``Preserve the Title''
+of such a section when you modify the Document means that it remains a
+section ``Entitled XYZ'' according to this definition.
+
+The Document may include Warranty Disclaimers next to the notice which
+states that this License applies to the Document.  These Warranty
+Disclaimers are considered to be included by reference in this
+License, but only as regards disclaiming warranties: any other
+implication that these Warranty Disclaimers may have is void and has
+no effect on the meaning of this License.
+
+@item
+VERBATIM COPYING
+
+You may copy and distribute the Document in any medium, either
+commercially or noncommercially, provided that this License, the
+copyright notices, and the license notice saying this License applies
+to the Document are reproduced in all copies, and that you add no other
+conditions whatsoever to those of this License.  You may not use
+technical measures to obstruct or control the reading or further
+copying of the copies you make or distribute.  However, you may accept
+compensation in exchange for copies.  If you distribute a large enough
+number of copies you must also follow the conditions in section 3.
+
+You may also lend copies, under the same conditions stated above, and
+you may publicly display copies.
+
+@item
+COPYING IN QUANTITY
+
+If you publish printed copies (or copies in media that commonly have
+printed covers) of the Document, numbering more than 100, and the
+Document's license notice requires Cover Texts, you must enclose the
+copies in covers that carry, clearly and legibly, all these Cover
+Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on
+the back cover.  Both covers must also clearly and legibly identify
+you as the publisher of these copies.  The front cover must present
+the full title with all words of the title equally prominent and
+visible.  You may add other material on the covers in addition.
+Copying with changes limited to the covers, as long as they preserve
+the title of the Document and satisfy these conditions, can be treated
+as verbatim copying in other respects.
+
+If the required texts for either cover are too voluminous to fit
+legibly, you should put the first ones listed (as many as fit
+reasonably) on the actual cover, and continue the rest onto adjacent
+pages.
+
+If you publish or distribute Opaque copies of the Document numbering
+more than 100, you must either include a machine-readable Transparent
+copy along with each Opaque copy, or state in or with each Opaque copy
+a computer-network location from which the general network-using
+public has access to download using public-standard network protocols
+a complete Transparent copy of the Document, free of added material.
+If you use the latter option, you must take reasonably prudent steps,
+when you begin distribution of Opaque copies in quantity, to ensure
+that this Transparent copy will remain thus accessible at the stated
+location until at least one year after the last time you distribute an
+Opaque copy (directly or through your agents or retailers) of that
+edition to the public.
+
+It is requested, but not required, that you contact the authors of the
+Document well before redistributing any large number of copies, to give
+them a chance to provide you with an updated version of the Document.
+
+@item
+MODIFICATIONS
+
+You may copy and distribute a Modified Version of the Document under
+the conditions of sections 2 and 3 above, provided that you release
+the Modified Version under precisely this License, with the Modified
+Version filling the role of the Document, thus licensing distribution
+and modification of the Modified Version to whoever possesses a copy
+of it.  In addition, you must do these things in the Modified Version:
+
+@enumerate A
+@item
+Use in the Title Page (and on the covers, if any) a title distinct
+from that of the Document, and from those of previous versions
+(which should, if there were any, be listed in the History section
+of the Document).  You may use the same title as a previous version
+if the original publisher of that version gives permission.
+
+@item
+List on the Title Page, as authors, one or more persons or entities
+responsible for authorship of the modifications in the Modified
+Version, together with at least five of the principal authors of the
+Document (all of its principal authors, if it has fewer than five),
+unless they release you from this requirement.
+
+@item
+State on the Title page the name of the publisher of the
+Modified Version, as the publisher.
+
+@item
+Preserve all the copyright notices of the Document.
+
+@item
+Add an appropriate copyright notice for your modifications
+adjacent to the other copyright notices.
+
+@item
+Include, immediately after the copyright notices, a license notice
+giving the public permission to use the Modified Version under the
+terms of this License, in the form shown in the Addendum below.
+
+@item
+Preserve in that license notice the full lists of Invariant Sections
+and required Cover Texts given in the Document's license notice.
+
+@item
+Include an unaltered copy of this License.
+
+@item
+Preserve the section Entitled ``History'', Preserve its Title, and add
+to it an item stating at least the title, year, new authors, and
+publisher of the Modified Version as given on the Title Page.  If
+there is no section Entitled ``History'' in the Document, create one
+stating the title, year, authors, and publisher of the Document as
+given on its Title Page, then add an item describing the Modified
+Version as stated in the previous sentence.
+
+@item
+Preserve the network location, if any, given in the Document for
+public access to a Transparent copy of the Document, and likewise
+the network locations given in the Document for previous versions
+it was based on.  These may be placed in the ``History'' section.
+You may omit a network location for a work that was published at
+least four years before the Document itself, or if the original
+publisher of the version it refers to gives permission.
+
+@item
+For any section Entitled ``Acknowledgements'' or ``Dedications'', Preserve
+the Title of the section, and preserve in the section all the
+substance and tone of each of the contributor acknowledgements and/or
+dedications given therein.
+
+@item
+Preserve all the Invariant Sections of the Document,
+unaltered in their text and in their titles.  Section numbers
+or the equivalent are not considered part of the section titles.
+
+@item
+Delete any section Entitled ``Endorsements''.  Such a section
+may not be included in the Modified Version.
+
+@item
+Do not retitle any existing section to be Entitled ``Endorsements'' or
+to conflict in title with any Invariant Section.
+
+@item
+Preserve any Warranty Disclaimers.
+@end enumerate
+
+If the Modified Version includes new front-matter sections or
+appendices that qualify as Secondary Sections and contain no material
+copied from the Document, you may at your option designate some or all
+of these sections as invariant.  To do this, add their titles to the
+list of Invariant Sections in the Modified Version's license notice.
+These titles must be distinct from any other section titles.
+
+You may add a section Entitled ``Endorsements'', provided it contains
+nothing but endorsements of your Modified Version by various
+parties---for example, statements of peer review or that the text has
+been approved by an organization as the authoritative definition of a
+standard.
+
+You may add a passage of up to five words as a Front-Cover Text, and a
+passage of up to 25 words as a Back-Cover Text, to the end of the list
+of Cover Texts in the Modified Version.  Only one passage of
+Front-Cover Text and one of Back-Cover Text may be added by (or
+through arrangements made by) any one entity.  If the Document already
+includes a cover text for the same cover, previously added by you or
+by arrangement made by the same entity you are acting on behalf of,
+you may not add another; but you may replace the old one, on explicit
+permission from the previous publisher that added the old one.
+
+The author(s) and publisher(s) of the Document do not by this License
+give permission to use their names for publicity for or to assert or
+imply endorsement of any Modified Version.
+
+@item
+COMBINING DOCUMENTS
+
+You may combine the Document with other documents released under this
+License, under the terms defined in section 4 above for modified
+versions, provided that you include in the combination all of the
+Invariant Sections of all of the original documents, unmodified, and
+list them all as Invariant Sections of your combined work in its
+license notice, and that you preserve all their Warranty Disclaimers.
+
+The combined work need only contain one copy of this License, and
+multiple identical Invariant Sections may be replaced with a single
+copy.  If there are multiple Invariant Sections with the same name but
+different contents, make the title of each such section unique by
+adding at the end of it, in parentheses, the name of the original
+author or publisher of that section if known, or else a unique number.
+Make the same adjustment to the section titles in the list of
+Invariant Sections in the license notice of the combined work.
+
+In the combination, you must combine any sections Entitled ``History''
+in the various original documents, forming one section Entitled
+``History''; likewise combine any sections Entitled ``Acknowledgements'',
+and any sections Entitled ``Dedications''.  You must delete all
+sections Entitled ``Endorsements.''
+
+@item
+COLLECTIONS OF DOCUMENTS
+
+You may make a collection consisting of the Document and other documents
+released under this License, and replace the individual copies of this
+License in the various documents with a single copy that is included in
+the collection, provided that you follow the rules of this License for
+verbatim copying of each of the documents in all other respects.
+
+You may extract a single document from such a collection, and distribute
+it individually under this License, provided you insert a copy of this
+License into the extracted document, and follow this License in all
+other respects regarding verbatim copying of that document.
+
+@item
+AGGREGATION WITH INDEPENDENT WORKS
+
+A compilation of the Document or its derivatives with other separate
+and independent documents or works, in or on a volume of a storage or
+distribution medium, is called an ``aggregate'' if the copyright
+resulting from the compilation is not used to limit the legal rights
+of the compilation's users beyond what the individual works permit.
+When the Document is included in an aggregate, this License does not
+apply to the other works in the aggregate which are not themselves
+derivative works of the Document.
+
+If the Cover Text requirement of section 3 is applicable to these
+copies of the Document, then if the Document is less than one half of
+the entire aggregate, the Document's Cover Texts may be placed on
+covers that bracket the Document within the aggregate, or the
+electronic equivalent of covers if the Document is in electronic form.
+Otherwise they must appear on printed covers that bracket the whole
+aggregate.
+
+@item
+TRANSLATION
+
+Translation is considered a kind of modification, so you may
+distribute translations of the Document under the terms of section 4.
+Replacing Invariant Sections with translations requires special
+permission from their copyright holders, but you may include
+translations of some or all Invariant Sections in addition to the
+original versions of these Invariant Sections.  You may include a
+translation of this License, and all the license notices in the
+Document, and any Warranty Disclaimers, provided that you also include
+the original English version of this License and the original versions
+of those notices and disclaimers.  In case of a disagreement between
+the translation and the original version of this License or a notice
+or disclaimer, the original version will prevail.
+
+If a section in the Document is Entitled ``Acknowledgements'',
+``Dedications'', or ``History'', the requirement (section 4) to Preserve
+its Title (section 1) will typically require changing the actual
+title.
+
+@item
+TERMINATION
+
+You may not copy, modify, sublicense, or distribute the Document
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense, or distribute it is void, and
+will automatically terminate your rights under this License.
+
+However, if you cease all violation of this License, then your license
+from a particular copyright holder is reinstated (a) provisionally,
+unless and until the copyright holder explicitly and finally
+terminates your license, and (b) permanently, if the copyright holder
+fails to notify you of the violation by some reasonable means prior to
+60 days after the cessation.
+
+Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, receipt of a copy of some or all of the same material does
+not give you any rights to use it.
+
+@item
+FUTURE REVISIONS OF THIS LICENSE
+
+The Free Software Foundation may publish new, revised versions
+of the GNU Free Documentation License from time to time.  Such new
+versions will be similar in spirit to the present version, but may
+differ in detail to address new problems or concerns.  See
+@uref{http://www.gnu.org/copyleft/}.
+
+Each version of the License is given a distinguishing version number.
+If the Document specifies that a particular numbered version of this
+License ``or any later version'' applies to it, you have the option of
+following the terms and conditions either of that specified version or
+of any later version that has been published (not as a draft) by the
+Free Software Foundation.  If the Document does not specify a version
+number of this License, you may choose any version ever published (not
+as a draft) by the Free Software Foundation.  If the Document
+specifies that a proxy can decide which future versions of this
+License can be used, that proxy's public statement of acceptance of a
+version permanently authorizes you to choose that version for the
+Document.
+
+@item
+RELICENSING
+
+``Massive Multiauthor Collaboration Site'' (or ``MMC Site'') means any
+World Wide Web server that publishes copyrightable works and also
+provides prominent facilities for anybody to edit those works.  A
+public wiki that anybody can edit is an example of such a server.  A
+``Massive Multiauthor Collaboration'' (or ``MMC'') contained in the
+site means any set of copyrightable works thus published on the MMC
+site.
+
+``CC-BY-SA'' means the Creative Commons Attribution-Share Alike 3.0
+license published by Creative Commons Corporation, a not-for-profit
+corporation with a principal place of business in San Francisco,
+California, as well as future copyleft versions of that license
+published by that same organization.
+
+``Incorporate'' means to publish or republish a Document, in whole or
+in part, as part of another Document.
+
+An MMC is ``eligible for relicensing'' if it is licensed under this
+License, and if all works that were first published under this License
+somewhere other than this MMC, and subsequently incorporated in whole
+or in part into the MMC, (1) had no cover texts or invariant sections,
+and (2) were thus incorporated prior to November 1, 2008.
+
+The operator of an MMC Site may republish an MMC contained in the site
+under CC-BY-SA on the same site at any time before August 1, 2009,
+provided the MMC is eligible for relicensing.
+
+@end enumerate
+
+@page
+@heading ADDENDUM: How to use this License for your documents
+
+To use this License in a document you have written, include a copy of
+the License in the document and put the following copyright and
+license notices just after the title page:
+
+@smallexample
+@group
+  Copyright (C)  @var{year}  @var{your name}.
+  Permission is granted to copy, distribute and/or modify this document
+  under the terms of the GNU Free Documentation License, Version 1.3
+  or any later version published by the Free Software Foundation;
+  with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
+  Texts.  A copy of the license is included in the section entitled ``GNU
+  Free Documentation License''.
+@end group
+@end smallexample
+
+If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts,
+replace the ``with@dots{}Texts.'' line with this:
+
+@smallexample
+@group
+    with the Invariant Sections being @var{list their titles}, with
+    the Front-Cover Texts being @var{list}, and with the Back-Cover Texts
+    being @var{list}.
+@end group
+@end smallexample
+
+If you have Invariant Sections without Cover Texts, or some other
+combination of the three, merge those two alternatives to suit the
+situation.
+
+If your document contains nontrivial examples of program code, we
+recommend releasing these examples in parallel under your choice of
+free software license, such as the GNU General Public License,
+to permit their use in free software.
+
+@c Local Variables:
+@c ispell-local-pdict: "ispell-dict"
+@c End:
+
diff --git a/lib/readline/doc/history.texi b/lib/readline/doc/history.texi
new file mode 100644
index 0000000..7a3a476
--- /dev/null
+++ b/lib/readline/doc/history.texi
@@ -0,0 +1,85 @@
+\input texinfo    @c -*-texinfo-*-
+@c %**start of header (This is for running Texinfo on a region.)
+@setfilename history.info
+@settitle GNU History Library
+@include version.texi
+
+@c %**end of header (This is for running Texinfo on a region.)
+
+@copying
+This document describes the GNU History library
+(version @value{VERSION}, @value{UPDATED}),
+a programming tool that provides a consistent user interface for
+recalling lines of previously typed input.
+
+Copyright @copyright{} 1988--2020 Free Software Foundation, Inc.
+
+@quotation
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.3 or
+any later version published by the Free Software Foundation; with no
+Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.
+A copy of the license is included in the section entitled
+``GNU Free Documentation License''.
+
+@end quotation
+@end copying
+
+@dircategory Libraries
+@direntry
+* History: (history).       The GNU history library API.
+@end direntry
+
+@titlepage
+@title GNU History Library
+@subtitle Edition @value{EDITION}, for @code{History Library} Version @value{VERSION}.
+@subtitle @value{UPDATED-MONTH}
+@author Chet Ramey, Case Western Reserve University
+@author Brian Fox, Free Software Foundation
+
+@page
+
+@vskip 0pt plus 1filll
+@insertcopying
+
+@end titlepage
+
+@contents
+
+@ifnottex
+@node Top
+@top GNU History Library
+
+This document describes the GNU History library, a programming tool that
+provides a consistent user interface for recalling lines of previously
+typed input.
+
+@menu
+* Using History Interactively::	  GNU History User's Manual.
+* Programming with GNU History::  GNU History Programmer's Manual.
+* GNU Free Documentation License::	License for copying this manual.
+* Concept Index::		  Index of concepts described in this manual.
+* Function and Variable Index::	  Index of externally visible functions
+				  and variables.
+@end menu
+@end ifnottex
+
+@syncodeindex fn vr
+
+@include hsuser.texi
+@include hstech.texi
+
+@node GNU Free Documentation License
+@appendix GNU Free Documentation License
+
+@include fdl.texi
+
+@node Concept Index
+@appendix Concept Index
+@printindex cp
+
+@node Function and Variable Index
+@appendix Function and Variable Index
+@printindex vr
+
+@bye
diff --git a/lib/readline/doc/hstech.texi b/lib/readline/doc/hstech.texi
new file mode 100644
index 0000000..7ac1195
--- /dev/null
+++ b/lib/readline/doc/hstech.texi
@@ -0,0 +1,602 @@
+@ignore
+This file documents the user interface to the GNU History library.
+
+Copyright (C) 1988-2020 Free Software Foundation, Inc.
+Authored by Brian Fox and Chet Ramey.
+
+Permission is granted to make and distribute verbatim copies of this manual
+provided the copyright notice and this permission notice are preserved on
+all copies.
+
+Permission is granted to process this file through Tex and print the
+results, provided the printed document carries copying permission notice
+identical to this one except for the removal of this paragraph (this
+paragraph not being relevant to the printed manual).
+
+Permission is granted to copy and distribute modified versions of this
+manual under the conditions for verbatim copying, provided also that the
+GNU Copyright statement is available to the distributee, and provided that
+the entire resulting derived work is distributed under the terms of a
+permission notice identical to this one.
+
+Permission is granted to copy and distribute translations of this manual
+into another language, under the above conditions for modified versions.
+@end ignore
+
+@node Programming with GNU History
+@chapter Programming with GNU History
+
+This chapter describes how to interface programs that you write
+with the @sc{gnu} History Library.
+It should be considered a technical guide.
+For information on the interactive use of @sc{gnu} History, @pxref{Using
+History Interactively}.
+
+@menu
+* Introduction to History::	What is the GNU History library for?
+* History Storage::		How information is stored.
+* History Functions::		Functions that you can use.
+* History Variables::		Variables that control behaviour.
+* History Programming Example::	Example of using the GNU History Library.
+@end menu
+
+@node Introduction to History
+@section Introduction to History
+
+Many programs read input from the user a line at a time.  The @sc{gnu}
+History library is able to keep track of those lines, associate arbitrary
+data with each line, and utilize information from previous lines in
+composing new ones. 
+
+A programmer using the History library has available functions
+for remembering lines on a history list, associating arbitrary data
+with a line, removing lines from the list, searching through the list
+for a line containing an arbitrary text string, and referencing any line
+in the list directly.  In addition, a history @dfn{expansion} function
+is available which provides for a consistent user interface across
+different programs.
+
+The user using programs written with the History library has the
+benefit of a consistent user interface with a set of well-known
+commands for manipulating the text of previous lines and using that text
+in new commands.  The basic history manipulation commands are similar to
+the history substitution provided by @code{csh}.
+
+The programmer can also use the Readline library, which
+includes some history manipulation by default, and has the added
+advantage of command line editing.
+
+Before declaring any functions using any functionality the History
+library provides in other code, an application writer should include
+the file @code{<readline/history.h>} in any file that uses the
+History library's features.  It supplies extern declarations for all
+of the library's public functions and variables, and declares all of
+the public data structures.
+
+@node History Storage
+@section History Storage
+
+The history list is an array of history entries.  A history entry is
+declared as follows:
+
+@example
+typedef void *histdata_t;
+
+typedef struct _hist_entry @{
+  char *line;
+  char *timestamp;
+  histdata_t data;
+@} HIST_ENTRY;
+@end example
+
+The history list itself might therefore be declared as
+
+@example
+HIST_ENTRY **the_history_list;
+@end example
+
+The state of the History library is encapsulated into a single structure:
+
+@example
+/*
+ * A structure used to pass around the current state of the history.
+ */
+typedef struct _hist_state @{
+  HIST_ENTRY **entries; /* Pointer to the entries themselves. */
+  int offset;           /* The location pointer within this array. */
+  int length;           /* Number of elements within this array. */
+  int size;             /* Number of slots allocated to this array. */
+  int flags;
+@} HISTORY_STATE;
+@end example
+
+If the flags member includes @code{HS_STIFLED}, the history has been
+stifled.
+
+@node History Functions
+@section History Functions
+
+This section describes the calling sequence for the various functions
+exported by the @sc{gnu} History library.
+
+@menu
+* Initializing History and State Management::	Functions to call when you
+						want to use history in a
+						program.
+* History List Management::		Functions used to manage the list
+					of history entries.
+* Information About the History List::	Functions returning information about
+					the history list.
+* Moving Around the History List::	Functions used to change the position
+					in the history list.
+* Searching the History List::		Functions to search the history list
+					for entries containing a string.
+* Managing the History File::		Functions that read and write a file
+					containing the history list.
+* History Expansion::			Functions to perform csh-like history
+					expansion.
+@end menu
+
+@node Initializing History and State Management
+@subsection Initializing History and State Management
+
+This section describes functions used to initialize and manage
+the state of the History library when you want to use the history
+functions in your program.
+
+@deftypefun void using_history (void)
+Begin a session in which the history functions might be used.  This
+initializes the interactive variables.
+@end deftypefun
+
+@deftypefun {HISTORY_STATE *} history_get_history_state (void)
+Return a structure describing the current state of the input history.
+@end deftypefun
+
+@deftypefun void history_set_history_state (HISTORY_STATE *state)
+Set the state of the history list according to @var{state}.
+@end deftypefun
+
+@node History List Management
+@subsection History List Management
+
+These functions manage individual entries on the history list, or set
+parameters managing the list itself.
+
+@deftypefun void add_history (const char *string)
+Place @var{string} at the end of the history list.  The associated data
+field (if any) is set to @code{NULL}.
+If the maximum number of history entries has been set using
+@code{stifle_history()}, and the new number of history entries would exceed
+that maximum, the oldest history entry is removed.
+@end deftypefun
+
+@deftypefun void add_history_time (const char *string)
+Change the time stamp associated with the most recent history entry to
+@var{string}.
+@end deftypefun
+
+@deftypefun {HIST_ENTRY *} remove_history (int which)
+Remove history entry at offset @var{which} from the history.  The
+removed element is returned so you can free the line, data,
+and containing structure.
+@end deftypefun
+
+@deftypefun {histdata_t} free_history_entry (HIST_ENTRY *histent)
+Free the history entry @var{histent} and any history library private
+data associated with it.  Returns the application-specific data
+so the caller can dispose of it.
+@end deftypefun
+
+@deftypefun {HIST_ENTRY *} replace_history_entry (int which, const char *line, histdata_t data)
+Make the history entry at offset @var{which} have @var{line} and @var{data}.
+This returns the old entry so the caller can dispose of any
+application-specific data.  In the case
+of an invalid @var{which}, a @code{NULL} pointer is returned.
+@end deftypefun
+
+@deftypefun void clear_history (void)
+Clear the history list by deleting all the entries.
+@end deftypefun
+
+@deftypefun void stifle_history (int max)
+Stifle the history list, remembering only the last @var{max} entries.
+The history list will contain only @var{max} entries at a time.
+@end deftypefun
+
+@deftypefun int unstifle_history (void)
+Stop stifling the history.  This returns the previously-set
+maximum number of history entries (as set by @code{stifle_history()}).
+The value is positive if the history was
+stifled, negative if it wasn't.
+@end deftypefun
+
+@deftypefun int history_is_stifled (void)
+Returns non-zero if the history is stifled, zero if it is not.
+@end deftypefun
+
+@node Information About the History List
+@subsection Information About the History List
+
+These functions return information about the entire history list or
+individual list entries.
+
+@deftypefun {HIST_ENTRY **} history_list (void)
+Return a @code{NULL} terminated array of @code{HIST_ENTRY *} which is the
+current input history.  Element 0 of this list is the beginning of time.
+If there is no history, return @code{NULL}.
+@end deftypefun
+
+@deftypefun int where_history (void)
+Returns the offset of the current history element.
+@end deftypefun
+
+@deftypefun {HIST_ENTRY *} current_history (void)
+Return the history entry at the current position, as determined by
+@code{where_history()}.  If there is no entry there, return a @code{NULL}
+pointer.
+@end deftypefun
+
+@deftypefun {HIST_ENTRY *} history_get (int offset)
+Return the history entry at position @var{offset}.
+The range of valid
+values of @var{offset} starts at @code{history_base} and ends at
+@var{history_length} - 1 (@pxref{History Variables}).
+If there is no entry there, or if @var{offset} is outside the valid
+range, return a @code{NULL} pointer.
+@end deftypefun
+
+@deftypefun time_t history_get_time (HIST_ENTRY *entry)
+Return the time stamp associated with the history entry @var{entry}.
+If the timestamp is missing or invalid, return 0.
+@end deftypefun
+
+@deftypefun int history_total_bytes (void)
+Return the number of bytes that the primary history entries are using.
+This function returns the sum of the lengths of all the lines in the
+history.
+@end deftypefun
+
+@node Moving Around the History List
+@subsection Moving Around the History List
+
+These functions allow the current index into the history list to be
+set or changed.
+
+@deftypefun int history_set_pos (int pos)
+Set the current history offset to @var{pos}, an absolute index
+into the list.
+Returns 1 on success, 0 if @var{pos} is less than zero or greater
+than the number of history entries.
+@end deftypefun
+
+@deftypefun {HIST_ENTRY *} previous_history (void)
+Back up the current history offset to the previous history entry, and
+return a pointer to that entry.  If there is no previous entry, return
+a @code{NULL} pointer.
+@end deftypefun
+
+@deftypefun {HIST_ENTRY *} next_history (void)
+If the current history offset refers to a valid history entry,
+increment the current history offset.
+If the possibly-incremented history offset refers to a valid history
+entry, return a pointer to that entry;
+otherwise, return a @code{BNULL} pointer.
+@end deftypefun
+
+@node Searching the History List
+@subsection Searching the History List
+@cindex History Searching
+
+These functions allow searching of the history list for entries containing
+a specific string.  Searching may be performed both forward and backward
+from the current history position.  The search may be @dfn{anchored},
+meaning that the string must match at the beginning of the history entry.
+@cindex anchored search
+
+@deftypefun int history_search (const char *string, int direction)
+Search the history for @var{string}, starting at the current history offset.
+If @var{direction} is less than 0, then the search is through
+previous entries, otherwise through subsequent entries.
+If @var{string} is found, then
+the current history index is set to that history entry, and the value
+returned is the offset in the line of the entry where
+@var{string} was found.  Otherwise, nothing is changed, and a -1 is
+returned.
+@end deftypefun
+
+@deftypefun int history_search_prefix (const char *string, int direction)
+Search the history for @var{string}, starting at the current history
+offset.  The search is anchored: matching lines must begin with
+@var{string}.  If @var{direction} is less than 0, then the search is
+through previous entries, otherwise through subsequent entries.
+If @var{string} is found, then the
+current history index is set to that entry, and the return value is 0. 
+Otherwise, nothing is changed, and a -1 is returned. 
+@end deftypefun
+
+@deftypefun int history_search_pos (const char *string, int direction, int pos)
+Search for @var{string} in the history list, starting at @var{pos}, an
+absolute index into the list.  If @var{direction} is negative, the search
+proceeds backward from @var{pos}, otherwise forward.  Returns the absolute
+index of the history element where @var{string} was found, or -1 otherwise.
+@end deftypefun
+
+@node Managing the History File
+@subsection Managing the History File
+
+The History library can read the history from and write it to a file.
+This section documents the functions for managing a history file.
+
+@deftypefun int read_history (const char *filename)
+Add the contents of @var{filename} to the history list, a line at a time.
+If @var{filename} is @code{NULL}, then read from @file{~/.history}.
+Returns 0 if successful, or @code{errno} if not.
+@end deftypefun
+
+@deftypefun int read_history_range (const char *filename, int from, int to)
+Read a range of lines from @var{filename}, adding them to the history list.
+Start reading at line @var{from} and end at @var{to}.
+If @var{from} is zero, start at the beginning.  If @var{to} is less than
+@var{from}, then read until the end of the file.  If @var{filename} is
+@code{NULL}, then read from @file{~/.history}.  Returns 0 if successful,
+or @code{errno} if not.
+@end deftypefun
+
+@deftypefun int write_history (const char *filename)
+Write the current history to @var{filename}, overwriting @var{filename}
+if necessary.
+If @var{filename} is @code{NULL}, then write the history list to
+@file{~/.history}.
+Returns 0 on success, or @code{errno} on a read or write error.
+@end deftypefun
+
+@deftypefun int append_history (int nelements, const char *filename)
+Append the last @var{nelements} of the history list to @var{filename}.
+If @var{filename} is @code{NULL}, then append to @file{~/.history}.
+Returns 0 on success, or @code{errno} on a read or write error.
+@end deftypefun
+
+@deftypefun int history_truncate_file (const char *filename, int nlines)
+Truncate the history file @var{filename}, leaving only the last
+@var{nlines} lines.
+If @var{filename} is @code{NULL}, then @file{~/.history} is truncated.
+Returns 0 on success, or @code{errno} on failure.
+@end deftypefun
+
+@node History Expansion
+@subsection History Expansion
+
+These functions implement history expansion.
+
+@deftypefun int history_expand (char *string, char **output)
+Expand @var{string}, placing the result into @var{output}, a pointer
+to a string (@pxref{History Interaction}).  Returns:
+@table @code
+@item 0
+If no expansions took place (or, if the only change in
+the text was the removal of escape characters preceding the history expansion
+character);
+@item 1
+if expansions did take place;
+@item -1
+if there was an error in expansion;
+@item 2
+if the returned line should be displayed, but not executed,
+as with the @code{:p} modifier (@pxref{Modifiers}).
+@end table
+
+If an error occurred in expansion, then @var{output} contains a descriptive
+error message.
+@end deftypefun
+
+@deftypefun {char *} get_history_event (const char *string, int *cindex, int qchar)
+Returns the text of the history event beginning at @var{string} +
+@var{*cindex}.  @var{*cindex} is modified to point to after the event
+specifier.  At function entry, @var{cindex} points to the index into
+@var{string} where the history event specification begins.  @var{qchar}
+is a character that is allowed to end the event specification in addition
+to the ``normal'' terminating characters.
+@end deftypefun
+
+@deftypefun {char **} history_tokenize (const char *string)
+Return an array of tokens parsed out of @var{string}, much as the
+shell might.  The tokens are split on the characters in the
+@var{history_word_delimiters} variable,
+and shell quoting conventions are obeyed as described below.
+@end deftypefun
+
+@deftypefun {char *} history_arg_extract (int first, int last, const char *string)
+Extract a string segment consisting of the @var{first} through @var{last}
+arguments present in @var{string}.  Arguments are split using
+@code{history_tokenize}.
+@end deftypefun
+
+@node History Variables
+@section History Variables
+
+This section describes the externally-visible variables exported by
+the @sc{gnu} History Library.
+
+@deftypevar int history_base
+The logical offset of the first entry in the history list.
+@end deftypevar
+
+@deftypevar int history_length
+The number of entries currently stored in the history list.
+@end deftypevar
+
+@deftypevar int history_max_entries
+The maximum number of history entries.  This must be changed using
+@code{stifle_history()}.
+@end deftypevar
+
+@deftypevar int history_write_timestamps
+If non-zero, timestamps are written to the history file, so they can be
+preserved between sessions.  The default value is 0, meaning that
+timestamps are not saved.
+
+The current timestamp format uses the value of @var{history_comment_char}
+to delimit timestamp entries in the history file.  If that variable does
+not have a value (the default), timestamps will not be written.
+@end deftypevar
+
+@deftypevar char history_expansion_char
+The character that introduces a history event.  The default is @samp{!}.
+Setting this to 0 inhibits history expansion.
+@end deftypevar
+
+@deftypevar char history_subst_char
+The character that invokes word substitution if found at the start of
+a line.  The default is @samp{^}.
+@end deftypevar
+
+@deftypevar char history_comment_char
+During tokenization, if this character is seen as the first character
+of a word, then it and all subsequent characters up to a newline are
+ignored, suppressing history expansion for the remainder of the line.
+This is disabled by default.
+@end deftypevar
+
+@deftypevar {char *} history_word_delimiters
+The characters that separate tokens for @code{history_tokenize()}.
+The default value is @code{" \t\n()<>;&|"}.
+@end deftypevar
+
+@deftypevar {char *} history_search_delimiter_chars
+The list of additional characters which can delimit a history search
+string, in addition to space, TAB, @samp{:} and @samp{?} in the case of
+a substring search.  The default is empty.
+@end deftypevar
+
+@deftypevar {char *} history_no_expand_chars
+The list of characters which inhibit history expansion if found immediately
+following @var{history_expansion_char}.  The default is space, tab, newline,
+carriage return, and @samp{=}.
+@end deftypevar
+
+@deftypevar int history_quotes_inhibit_expansion
+If non-zero, the history expansion code implements shell-like quoting:
+single-quoted words are not scanned for the history expansion
+character or the history comment character, and double-quoted words may
+have history expansion performed, since single quotes are not special
+within double quotes.
+The default value is 0.
+@end deftypevar
+
+@deftypevar int history_quoting_state
+An application may set this variable to indicate that the current line
+being expanded is subject to existing quoting. If set to @samp{'}, the
+history expansion function will assume that the line is single-quoted and
+inhibit expansion until it reads an unquoted closing single quote; if set
+to @samp{"}, history expansion will assume the line is double quoted until
+it reads an unquoted closing double quote. If set to zero, the default,
+the history expansion function will assume the line is not quoted and
+treat quote characters within the line as described above.
+This is only effective if @var{history_quotes_inhibit_expansion} is set.
+@end deftypevar
+
+@deftypevar {rl_linebuf_func_t *} history_inhibit_expansion_function
+This should be set to the address of a function that takes two arguments:
+a @code{char *} (@var{string})
+and an @code{int} index into that string (@var{i}).
+It should return a non-zero value if the history expansion starting at
+@var{string[i]} should not be performed; zero if the expansion should
+be done.
+It is intended for use by applications like Bash that use the history
+expansion character for additional purposes.
+By default, this variable is set to @code{NULL}.
+@end deftypevar
+
+@node History Programming Example
+@section History Programming Example
+
+The following program demonstrates simple use of the @sc{gnu} History Library.
+
+@smallexample
+#include <stdio.h>
+#include <readline/history.h>
+
+main (argc, argv)
+     int argc;
+     char **argv;
+@{
+  char line[1024], *t;
+  int len, done = 0;
+
+  line[0] = 0;
+
+  using_history ();
+  while (!done)
+    @{
+      printf ("history$ ");
+      fflush (stdout);
+      t = fgets (line, sizeof (line) - 1, stdin);
+      if (t && *t)
+        @{
+          len = strlen (t);
+          if (t[len - 1] == '\n')
+            t[len - 1] = '\0';
+        @}
+
+      if (!t)
+        strcpy (line, "quit");
+
+      if (line[0])
+        @{
+          char *expansion;
+          int result;
+
+          result = history_expand (line, &expansion);
+          if (result)
+            fprintf (stderr, "%s\n", expansion);
+
+          if (result < 0 || result == 2)
+            @{
+              free (expansion);
+              continue;
+            @}
+
+          add_history (expansion);
+          strncpy (line, expansion, sizeof (line) - 1);
+          free (expansion);
+        @}
+
+      if (strcmp (line, "quit") == 0)
+        done = 1;
+      else if (strcmp (line, "save") == 0)
+        write_history ("history_file");
+      else if (strcmp (line, "read") == 0)
+        read_history ("history_file");
+      else if (strcmp (line, "list") == 0)
+        @{
+          register HIST_ENTRY **the_list;
+          register int i;
+
+          the_list = history_list ();
+          if (the_list)
+            for (i = 0; the_list[i]; i++)
+              printf ("%d: %s\n", i + history_base, the_list[i]->line);
+        @}
+      else if (strncmp (line, "delete", 6) == 0)
+        @{
+          int which;
+          if ((sscanf (line + 6, "%d", &which)) == 1)
+            @{
+              HIST_ENTRY *entry = remove_history (which);
+              if (!entry)
+                fprintf (stderr, "No such entry %d\n", which);
+              else
+                @{
+                  free (entry->line);
+                  free (entry);
+                @}
+            @}
+          else
+            @{
+              fprintf (stderr, "non-numeric arg given to `delete'\n");
+            @}
+        @}
+    @}
+@}
+@end smallexample
diff --git a/lib/readline/doc/hsuser.texi b/lib/readline/doc/hsuser.texi
new file mode 100644
index 0000000..b8fedf3
--- /dev/null
+++ b/lib/readline/doc/hsuser.texi
@@ -0,0 +1,527 @@
+@ignore
+This file documents the user interface to the GNU History library.
+
+Copyright (C) 1988--2020 Free Software Foundation, Inc.
+Authored by Brian Fox and Chet Ramey.
+
+Permission is granted to make and distribute verbatim copies of this manual
+provided the copyright notice and this permission notice are preserved on
+all copies.
+
+Permission is granted to process this file through Tex and print the
+results, provided the printed document carries copying permission notice
+identical to this one except for the removal of this paragraph (this
+paragraph not being relevant to the printed manual).
+
+Permission is granted to copy and distribute modified versions of this
+manual under the conditions for verbatim copying, provided also that the
+GNU Copyright statement is available to the distributee, and provided that
+the entire resulting derived work is distributed under the terms of a
+permission notice identical to this one.
+
+Permission is granted to copy and distribute translations of this manual
+into another language, under the above conditions for modified versions.
+@end ignore
+
+@node Using History Interactively
+@chapter Using History Interactively
+
+@ifclear BashFeatures
+@defcodeindex bt
+@end ifclear
+
+@ifset BashFeatures
+This chapter describes how to use the @sc{gnu} History Library
+interactively, from a user's standpoint.
+It should be considered a user's guide.
+For information on using the @sc{gnu} History Library in other programs,
+see the @sc{gnu} Readline Library Manual.
+@end ifset
+@ifclear BashFeatures
+This chapter describes how to use the @sc{gnu} History Library interactively,
+from a user's standpoint.  It should be considered a user's guide.  For
+information on using the @sc{gnu} History Library in your own programs,
+@pxref{Programming with GNU History}.
+@end ifclear
+
+@ifset BashFeatures
+@menu
+* Bash History Facilities::	How Bash lets you manipulate your command
+				history.
+* Bash History Builtins::	The Bash builtin commands that manipulate
+				the command history.
+* History Interaction::		What it feels like using History as a user.
+@end menu
+@end ifset
+@ifclear BashFeatures
+@menu
+* History Interaction::		What it feels like using History as a user.
+@end menu
+@end ifclear
+
+@ifset BashFeatures
+@node Bash History Facilities
+@section Bash History Facilities
+@cindex command history
+@cindex history list
+
+When the @option{-o history} option to the @code{set} builtin
+is enabled (@pxref{The Set Builtin}),
+the shell provides access to the @dfn{command history},
+the list of commands previously typed.
+The value of the @env{HISTSIZE} shell variable is used as the
+number of commands to save in a history list.
+The text of the last @env{$HISTSIZE}
+commands (default 500) is saved.
+The shell stores each command in the history list prior to
+parameter and variable expansion
+but after history expansion is performed, subject to the
+values of the shell variables
+@env{HISTIGNORE} and @env{HISTCONTROL}.
+
+When the shell starts up, the history is initialized from the
+file named by the @env{HISTFILE} variable (default @file{~/.bash_history}).
+The file named by the value of @env{HISTFILE} is truncated, if
+necessary, to contain no more than the number of lines specified by
+the value of the @env{HISTFILESIZE} variable.
+When a shell with history enabled exits, the last
+@env{$HISTSIZE} lines are copied from the history list to the file
+named by @env{$HISTFILE}.
+If the @code{histappend} shell option is set (@pxref{Bash Builtins}),
+the lines are appended to the history file,
+otherwise the history file is overwritten.
+If @env{HISTFILE}
+is unset, or if the history file is unwritable, the history is not saved.
+After saving the history, the history file is truncated
+to contain no more than @env{$HISTFILESIZE} lines.
+If @env{HISTFILESIZE} is unset, or set to null, a non-numeric value, or
+a numeric value less than zero, the history file is not truncated.
+
+If the @env{HISTTIMEFORMAT} is set, the time stamp information
+associated with each history entry is written to the history file,
+marked with the history comment character.
+When the history file is read, lines beginning with the history
+comment character followed immediately by a digit are interpreted
+as timestamps for the following history entry.
+
+The builtin command @code{fc} may be used to list or edit and re-execute
+a portion of the history list.
+The @code{history} builtin may be used to display or modify the history
+list and manipulate the history file.
+When using command-line editing, search commands
+are available in each editing mode that provide access to the
+history list (@pxref{Commands For History}).
+
+The shell allows control over which commands are saved on the history
+list.  The @env{HISTCONTROL} and @env{HISTIGNORE}
+variables may be set to cause the shell to save only a subset of the
+commands entered.
+The @code{cmdhist}
+shell option, if enabled, causes the shell to attempt to save each
+line of a multi-line command in the same history entry, adding
+semicolons where necessary to preserve syntactic correctness.
+The @code{lithist}
+shell option causes the shell to save the command with embedded newlines
+instead of semicolons.
+The @code{shopt} builtin is used to set these options.
+@xref{The Shopt Builtin}, for a description of @code{shopt}.
+
+@node Bash History Builtins
+@section Bash History Builtins
+@cindex history builtins
+
+Bash provides two builtin commands which manipulate the
+history list and history file.
+
+@table @code
+
+@item fc
+@btindex fc
+@example
+@code{fc [-e @var{ename}] [-lnr] [@var{first}] [@var{last}]}
+@code{fc -s [@var{pat}=@var{rep}] [@var{command}]}
+@end example
+
+The first form selects a range of commands from @var{first} to
+@var{last} from the history list and displays or edits and re-executes
+them.
+Both @var{first} and
+@var{last} may be specified as a string (to locate the most recent
+command beginning with that string) or as a number (an index into the
+history list, where a negative number is used as an offset from the
+current command number).
+
+When listing, a @var{first} or @var{last} of 0 is equivalent to -1
+and -0 is equivalent to the current command (usually the @code{fc}
+command);
+otherwise 0 is equivalent to -1 and -0 is invalid.
+
+If @var{last} is not specified, it is set to
+@var{first}.  If @var{first} is not specified, it is set to the previous
+command for editing and @minus{}16 for listing.  If the @option{-l} flag is
+given, the commands are listed on standard output.  The @option{-n} flag
+suppresses the command numbers when listing.  The @option{-r} flag
+reverses the order of the listing.  Otherwise, the editor given by
+@var{ename} is invoked on a file containing those commands.  If
+@var{ename} is not given, the value of the following variable expansion
+is used: @code{$@{FCEDIT:-$@{EDITOR:-vi@}@}}.  This says to use the
+value of the @env{FCEDIT} variable if set, or the value of the
+@env{EDITOR} variable if that is set, or @code{vi} if neither is set.
+When editing is complete, the edited commands are echoed and executed.
+
+In the second form, @var{command} is re-executed after each instance
+of @var{pat} in the selected command is replaced by @var{rep}.
+@var{command} is interpreted the same as @var{first} above.
+
+A useful alias to use with the @code{fc} command is @code{r='fc -s'}, so
+that typing @samp{r cc} runs the last command beginning with @code{cc}
+and typing @samp{r} re-executes the last command (@pxref{Aliases}).
+
+@item history
+@btindex history
+@example
+history [@var{n}]
+history -c
+history -d @var{offset}
+history -d @var{start}-@var{end}
+history [-anrw] [@var{filename}]
+history -ps @var{arg}
+@end example
+
+With no options, display the history list with line numbers.
+Lines prefixed with a @samp{*} have been modified.
+An argument of @var{n} lists only the last @var{n} lines.
+If the shell variable @env{HISTTIMEFORMAT} is set and not null,
+it is used as a format string for @var{strftime} to display
+the time stamp associated with each displayed history entry.
+No intervening blank is printed between the formatted time stamp
+and the history line.
+
+Options, if supplied, have the following meanings:
+
+@table @code
+@item -c
+Clear the history list.  This may be combined
+with the other options to replace the history list completely.
+
+@item -d @var{offset}
+Delete the history entry at position @var{offset}.
+If @var{offset} is positive, it should be specified as it appears when
+the history is displayed.
+If @var{offset} is negative, it is interpreted as relative to one greater
+than the last history position, so negative indices count back from the
+end of the history, and an index of @samp{-1} refers to the current
+@code{history -d} command.
+
+@item -d @var{start}-@var{end}
+Delete the history entries between positions @var{start} and @var{end},
+inclusive.  Positive and negative values for @var{start} and @var{end}
+are interpreted as described above.
+
+@item -a
+Append the new history lines to the history file.
+These are history lines entered since the beginning of the current
+Bash session, but not already appended to the history file.
+
+@item -n
+Append the history lines not already read from the history file
+to the current history list.  These are lines appended to the history
+file since the beginning of the current Bash session.
+
+@item -r
+Read the history file and append its contents to
+the history list.
+
+@item -w
+Write out the current history list to the history file.
+
+@item -p
+Perform history substitution on the @var{arg}s and display the result
+on the standard output, without storing the results in the history list.
+
+@item -s
+The @var{arg}s are added to the end of
+the history list as a single entry.
+
+@end table
+
+When any of the @option{-w}, @option{-r}, @option{-a}, or @option{-n} options is
+used, if @var{filename}
+is given, then it is used as the history file.  If not, then
+the value of the @env{HISTFILE} variable is used.
+
+@end table
+@end ifset
+
+@node History Interaction
+@section History Expansion
+@cindex history expansion
+
+The History library provides a history expansion feature that is similar
+to the history expansion provided by @code{csh}.  This section
+describes the syntax used to manipulate the history information.
+
+History expansions introduce words from the history list into
+the input stream, making it easy to repeat commands, insert the
+arguments to a previous command into the current input line, or
+fix errors in previous commands quickly.
+
+@ifset BashFeatures
+History expansion is performed immediately after a complete line
+is read, before the shell breaks it into words, and is performed
+on each line individually.  Bash attempts to inform the history
+expansion functions about quoting still in effect from previous lines.
+@end ifset
+
+History expansion takes place in two parts.  The first is to determine
+which line from the history list should be used during substitution.
+The second is to select portions of that line for inclusion into the
+current one.  The line selected from the history is called the
+@dfn{event}, and the portions of that line that are acted upon are
+called @dfn{words}.  Various @dfn{modifiers} are available to manipulate
+the selected words.  The line is broken into words in the same fashion
+that Bash does, so that several words
+surrounded by quotes are considered one word.
+History expansions are introduced by the appearance of the
+history expansion character, which is @samp{!} by default.
+
+History expansion implements shell-like quoting conventions:
+a backslash can be used to remove the special handling for the next character;
+single quotes enclose verbatim sequences of characters, and can be used to
+inhibit history expansion;
+and characters enclosed within double quotes may be subject to history
+expansion, since backslash can escape the history expansion character,
+but single quotes may not, since they are not treated specially within
+double quotes.
+
+@ifset BashFeatures
+When using the shell, only @samp{\} and @samp{'} may be used to escape the
+history expansion character, but the history expansion character is
+also treated as quoted if it immediately precedes the closing double quote
+in a double-quoted string. 
+@end ifset
+
+@ifset BashFeatures
+Several shell options settable with the @code{shopt}
+builtin (@pxref{The Shopt Builtin}) may be used to tailor
+the behavior of history expansion.  If the
+@code{histverify} shell option is enabled, and Readline
+is being used, history substitutions are not immediately passed to
+the shell parser.
+Instead, the expanded line is reloaded into the Readline
+editing buffer for further modification.
+If Readline is being used, and the @code{histreedit}
+shell option is enabled, a failed history expansion will be
+reloaded into the Readline editing buffer for correction.
+The @option{-p} option to the @code{history} builtin command
+may be used to see what a history expansion will do before using it.
+The @option{-s} option to the @code{history} builtin may be used to
+add commands to the end of the history list without actually executing
+them, so that they are available for subsequent recall.
+This is most useful in conjunction with Readline.
+
+The shell allows control of the various characters used by the
+history expansion mechanism with the @code{histchars} variable,
+as explained above (@pxref{Bash Variables}).  The shell uses
+the history comment character to mark history timestamps when
+writing the history file.
+@end ifset
+
+@menu
+* Event Designators::	How to specify which history line to use.
+* Word Designators::	Specifying which words are of interest.
+* Modifiers::		Modifying the results of substitution.
+@end menu
+
+@node Event Designators
+@subsection Event Designators
+@cindex event designators
+
+An event designator is a reference to a command line entry in the
+history list.
+Unless the reference is absolute, events are relative to the current
+position in the history list.
+@cindex history events
+
+@table @asis
+
+@item @code{!}
+@ifset BashFeatures
+Start a history substitution, except when followed by a space, tab,
+the end of the line, @samp{=} or @samp{(} (when the
+@code{extglob} shell option is enabled using the @code{shopt} builtin).
+@end ifset
+@ifclear BashFeatures
+Start a history substitution, except when followed by a space, tab,
+the end of the line, or @samp{=}.
+@end ifclear
+
+@item @code{!@var{n}}
+Refer to command line @var{n}.
+
+@item @code{!-@var{n}}
+Refer to the command @var{n} lines back.
+
+@item @code{!!}
+Refer to the previous command.  This is a synonym for @samp{!-1}.
+
+@item @code{!@var{string}}
+Refer to the most recent command
+preceding the current position in the history list
+starting with @var{string}.
+
+@item @code{!?@var{string}[?]}
+Refer to the most recent command
+preceding the current position in the history list
+containing @var{string}.
+The trailing
+@samp{?} may be omitted if the @var{string} is followed immediately by
+a newline.
+If @var{string} is missing, the string from the most recent search is used;
+it is an error if there is no previous search string.
+
+@item @code{^@var{string1}^@var{string2}^}
+Quick Substitution.  Repeat the last command, replacing @var{string1}
+with @var{string2}.  Equivalent to
+@code{!!:s^@var{string1}^@var{string2}^}.
+
+@item @code{!#}
+The entire command line typed so far.
+
+@end table
+
+@node Word Designators
+@subsection Word Designators
+
+Word designators are used to select desired words from the event.
+A @samp{:} separates the event specification from the word designator.  It
+may be omitted if the word designator begins with a @samp{^}, @samp{$},
+@samp{*}, @samp{-}, or @samp{%}.  Words are numbered from the beginning
+of the line, with the first word being denoted by 0 (zero).  Words are
+inserted into the current line separated by single spaces.
+
+@need 0.75
+For example,
+
+@table @code
+@item !!
+designates the preceding command.  When you type this, the preceding
+command is repeated in toto.
+
+@item !!:$
+designates the last argument of the preceding command.  This may be
+shortened to @code{!$}.
+
+@item !fi:2
+designates the second argument of the most recent command starting with
+the letters @code{fi}.
+@end table
+
+@need 0.75
+Here are the word designators:
+ 
+@table @code
+
+@item 0 (zero)
+The @code{0}th word.  For many applications, this is the command word.
+
+@item @var{n}
+The @var{n}th word.
+
+@item ^
+The first argument; that is, word 1.
+
+@item $
+The last argument.
+
+@item %
+The first word matched by the most recent @samp{?@var{string}?} search,
+if the search string begins with a character that is part of a word.
+
+@item @var{x}-@var{y}
+A range of words; @samp{-@var{y}} abbreviates @samp{0-@var{y}}.
+
+@item *
+All of the words, except the @code{0}th.  This is a synonym for @samp{1-$}.
+It is not an error to use @samp{*} if there is just one word in the event;
+the empty string is returned in that case.
+
+@item @var{x}*
+Abbreviates @samp{@var{x}-$}
+
+@item @var{x}-
+Abbreviates @samp{@var{x}-$} like @samp{@var{x}*}, but omits the last word.
+If @samp{x} is missing, it defaults to 0.
+
+@end table
+
+If a word designator is supplied without an event specification, the
+previous command is used as the event.
+
+@node Modifiers
+@subsection Modifiers
+
+After the optional word designator, you can add a sequence of one or more
+of the following modifiers, each preceded by a @samp{:}.
+These modify, or edit, the word or words selected from the history event.
+
+@table @code
+
+@item h
+Remove a trailing pathname component, leaving only the head.
+
+@item t
+Remove all leading pathname components, leaving the tail.
+
+@item r
+Remove a trailing suffix of the form @samp{.@var{suffix}}, leaving
+the basename.
+
+@item e
+Remove all but the trailing suffix.
+
+@item p
+Print the new command but do not execute it.
+
+@ifset BashFeatures
+@item q
+Quote the substituted words, escaping further substitutions.
+
+@item x
+Quote the substituted words as with @samp{q},
+but break into words at spaces, tabs, and newlines.
+The @samp{q} and @samp{x} modifiers are mutually exclusive; the last one
+supplied is used.
+@end ifset
+
+@item s/@var{old}/@var{new}/
+Substitute @var{new} for the first occurrence of @var{old} in the
+event line.
+Any character may be used as the delimiter in place of @samp{/}.
+The delimiter may be quoted in @var{old} and @var{new}
+with a single backslash.  If @samp{&} appears in @var{new},
+it is replaced by @var{old}.  A single backslash will quote
+the @samp{&}.
+If @var{old} is null, it is set to the last @var{old}
+substituted, or, if no previous history substitutions took place,
+the last @var{string}
+in a !?@var{string}@code{[?]}
+search.
+If @var{new} is is null, each matching @var{old} is deleted.
+The final delimiter is optional if it is the last
+character on the input line.
+
+@item &
+Repeat the previous substitution.
+
+@item g
+@itemx a
+Cause changes to be applied over the entire event line.  Used in
+conjunction with @samp{s}, as in @code{gs/@var{old}/@var{new}/},
+or with @samp{&}.
+
+@item G
+Apply the following @samp{s} or @samp{&} modifier once to each word
+in the event.
+
+@end table
diff --git a/lib/readline/doc/rlman.texi b/lib/readline/doc/rlman.texi
new file mode 100644
index 0000000..ec7487b
--- /dev/null
+++ b/lib/readline/doc/rlman.texi
@@ -0,0 +1,84 @@
+\input texinfo    @c -*-texinfo-*-
+@comment %**start of header (This is for running Texinfo on a region.)
+@setfilename readline.info
+@settitle GNU Readline Library
+@include version.texi
+
+@comment %**end of header (This is for running Texinfo on a region.)
+@synindex vr fn
+
+@copying
+This manual describes the GNU Readline Library
+(version @value{VERSION}, @value{UPDATED}), a library which aids in the
+consistency of user interface across discrete programs which provide
+a command line interface.
+
+Copyright @copyright{} 1988--2020 Free Software Foundation, Inc.
+
+@quotation
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.3 or
+any later version published by the Free Software Foundation; with no
+Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.
+A copy of the license is included in the section entitled
+``GNU Free Documentation License''.
+
+@end quotation
+@end copying
+
+@dircategory Libraries
+@direntry
+* Readline: (readline).       The GNU readline library API.
+@end direntry
+
+@titlepage  
+@title GNU Readline Library
+@subtitle Edition @value{EDITION}, for @code{Readline Library} Version @value{VERSION}.
+@subtitle @value{UPDATED-MONTH}
+@author Chet Ramey, Case Western Reserve University
+@author Brian Fox, Free Software Foundation
+
+@page
+@vskip 0pt plus 1filll
+@insertcopying
+
+@end titlepage
+
+@contents
+
+@ifnottex
+@node Top
+@top GNU Readline Library
+
+This document describes the GNU Readline Library, a utility which aids
+in the consistency of user interface across discrete programs which
+provide a command line interface.
+The Readline home page is @url{http://www.gnu.org/software/readline/}.
+
+@menu
+* Command Line Editing::	   GNU Readline User's Manual.
+* Programming with GNU Readline::  GNU Readline Programmer's Manual.
+* GNU Free Documentation License::	License for copying this manual.
+* Concept Index::		   Index of concepts described in this manual.
+* Function and Variable Index::	   Index of externally visible functions
+				   and variables.
+@end menu
+@end ifnottex
+
+@include rluser.texi
+@include rltech.texi
+
+@node GNU Free Documentation License
+@appendix GNU Free Documentation License
+
+@include fdl.texi
+
+@node Concept Index
+@unnumbered Concept Index
+@printindex cp
+
+@node Function and Variable Index
+@unnumbered Function and Variable Index
+@printindex fn
+
+@bye
diff --git a/lib/readline/doc/rltech.texi b/lib/readline/doc/rltech.texi
new file mode 100644
index 0000000..bbf57c2
--- /dev/null
+++ b/lib/readline/doc/rltech.texi
@@ -0,0 +1,2757 @@
+@comment %**start of header (This is for running Texinfo on a region.)
+@setfilename rltech.info
+@comment %**end of header (This is for running Texinfo on a region.)
+
+@ifinfo
+This document describes the GNU Readline Library, a utility for aiding
+in the consistency of user interface across discrete programs that need
+to provide a command line interface.
+
+Copyright (C) 1988--2020 Free Software Foundation, Inc.
+
+Permission is granted to make and distribute verbatim copies of
+this manual provided the copyright notice and this permission notice
+pare preserved on all copies.
+
+@ignore
+Permission is granted to process this file through TeX and print the
+results, provided the printed document carries copying permission
+notice identical to this one except for the removal of this paragraph
+(this paragraph not being relevant to the printed manual).
+@end ignore
+
+Permission is granted to copy and distribute modified versions of this
+manual under the conditions for verbatim copying, provided that the entire
+resulting derived work is distributed under the terms of a permission
+notice identical to this one.
+
+Permission is granted to copy and distribute translations of this manual
+into another language, under the above conditions for modified versions,
+except that this permission notice may be stated in a translation approved
+by the Foundation.
+@end ifinfo
+
+@node Programming with GNU Readline
+@chapter Programming with GNU Readline
+
+This chapter describes the interface between the @sc{gnu} Readline Library and
+other programs.  If you are a programmer, and you wish to include the
+features found in @sc{gnu} Readline
+such as completion, line editing, and interactive history manipulation
+in your own programs, this section is for you.
+
+@menu
+* Basic Behavior::	Using the default behavior of Readline.
+* Custom Functions::	Adding your own functions to Readline.
+* Readline Variables::			Variables accessible to custom
+					functions.
+* Readline Convenience Functions::	Functions which Readline supplies to
+					aid in writing your own custom
+					functions.
+* Readline Signal Handling::	How Readline behaves when it receives signals.
+* Custom Completers::	Supplanting or supplementing Readline's
+			completion functions.
+@end menu
+
+@node Basic Behavior
+@section Basic Behavior
+
+Many programs provide a command line interface, such as @code{mail},
+@code{ftp}, and @code{sh}.  For such programs, the default behaviour of
+Readline is sufficient.  This section describes how to use Readline in
+the simplest way possible, perhaps to replace calls in your code to
+@code{gets()} or @code{fgets()}.
+
+@findex readline
+@cindex readline, function
+
+The function @code{readline()} prints a prompt @var{prompt}
+and then reads and returns a single line of text from the user.
+If @var{prompt} is @code{NULL} or the empty string, no prompt is displayed.
+The line @code{readline} returns is allocated with @code{malloc()};
+the caller should @code{free()} the line when it has finished with it.
+The declaration for @code{readline} in ANSI C is
+
+@example
+@code{char *readline (const char *@var{prompt});}
+@end example
+
+@noindent
+So, one might say
+@example
+@code{char *line = readline ("Enter a line: ");}
+@end example
+@noindent
+in order to read a line of text from the user.
+The line returned has the final newline removed, so only the
+text remains.
+
+If @code{readline} encounters an @code{EOF} while reading the line, and the
+line is empty at that point, then @code{(char *)NULL} is returned.
+Otherwise, the line is ended just as if a newline had been typed.
+
+Readline performs some expansion on the @var{prompt} before it is
+displayed on the screen.  See the description of @code{rl_expand_prompt}
+(@pxref{Redisplay}) for additional details, especially if @var{prompt}
+will contain characters that do not consume physical screen space when
+displayed.
+
+If you want the user to be able to get at the line later, (with
+@key{C-p} for example), you must call @code{add_history()} to save the
+line away in a @dfn{history} list of such lines.
+
+@example
+@code{add_history (line)};
+@end example
+
+@noindent
+For full details on the GNU History Library, see the associated manual.
+
+It is preferable to avoid saving empty lines on the history list, since
+users rarely have a burning need to reuse a blank line.  Here is
+a function which usefully replaces the standard @code{gets()} library
+function, and has the advantage of no static buffer to overflow:
+
+@example
+/* A static variable for holding the line. */
+static char *line_read = (char *)NULL;
+
+/* Read a string, and return a pointer to it.
+   Returns NULL on EOF. */
+char *
+rl_gets ()
+@{
+  /* If the buffer has already been allocated,
+     return the memory to the free pool. */
+  if (line_read)
+    @{
+      free (line_read);
+      line_read = (char *)NULL;
+    @}
+
+  /* Get a line from the user. */
+  line_read = readline ("");
+
+  /* If the line has any text in it,
+     save it on the history. */
+  if (line_read && *line_read)
+    add_history (line_read);
+
+  return (line_read);
+@}
+@end example
+
+This function gives the user the default behaviour of @key{TAB}
+completion: completion on file names.  If you do not want Readline to
+complete on filenames, you can change the binding of the @key{TAB} key
+with @code{rl_bind_key()}.
+
+@example
+@code{int rl_bind_key (int @var{key}, rl_command_func_t *@var{function});}
+@end example
+
+@code{rl_bind_key()} takes two arguments: @var{key} is the character that
+you want to bind, and @var{function} is the address of the function to
+call when @var{key} is pressed.  Binding @key{TAB} to @code{rl_insert()}
+makes @key{TAB} insert itself.
+@code{rl_bind_key()} returns non-zero if @var{key} is not a valid
+ASCII character code (between 0 and 255).
+
+Thus, to disable the default @key{TAB} behavior, the following suffices:
+@example
+@code{rl_bind_key ('\t', rl_insert);}
+@end example
+
+This code should be executed once at the start of your program; you
+might write a function called @code{initialize_readline()} which
+performs this and other desired initializations, such as installing
+custom completers (@pxref{Custom Completers}).
+
+@node Custom Functions
+@section Custom Functions
+
+Readline provides many functions for manipulating the text of
+the line, but it isn't possible to anticipate the needs of all
+programs.  This section describes the various functions and variables
+defined within the Readline library which allow a user program to add
+customized functionality to Readline.
+
+Before declaring any functions that customize Readline's behavior, or
+using any functionality Readline provides in other code, an
+application writer should include the file @code{<readline/readline.h>}
+in any file that uses Readline's features.  Since some of the definitions
+in @code{readline.h} use the @code{stdio} library, the file
+@code{<stdio.h>} should be included before @code{readline.h}.
+
+@code{readline.h} defines a C preprocessor variable that should
+be treated as an integer, @code{RL_READLINE_VERSION}, which may
+be used to conditionally compile application code depending on
+the installed Readline version.  The value is a hexadecimal
+encoding of the major and minor version numbers of the library,
+of the form 0x@var{MMmm}.  @var{MM} is the two-digit major
+version number; @var{mm} is the two-digit minor version number. 
+For Readline 4.2, for example, the value of
+@code{RL_READLINE_VERSION} would be @code{0x0402}. 
+
+@menu
+* Readline Typedefs::	C declarations to make code readable.
+* Function Writing::	Variables and calling conventions.
+@end menu
+
+@node Readline Typedefs
+@subsection Readline Typedefs
+
+For readability, we declare a number of new object types, all pointers
+to functions.
+
+The reason for declaring these new types is to make it easier to write
+code describing pointers to C functions with appropriately prototyped
+arguments and return values.
+
+For instance, say we want to declare a variable @var{func} as a pointer
+to a function which takes two @code{int} arguments and returns an
+@code{int} (this is the type of all of the Readline bindable functions).
+Instead of the classic C declaration
+
+@code{int (*func)();}
+
+@noindent
+or the ANSI-C style declaration
+
+@code{int (*func)(int, int);}
+
+@noindent
+we may write
+
+@code{rl_command_func_t *func;}
+
+The full list of function pointer types available is
+
+@table @code
+@item typedef int rl_command_func_t (int, int);
+
+@item typedef char *rl_compentry_func_t (const char *, int);
+
+@item typedef char **rl_completion_func_t (const char *, int, int);
+
+@item typedef char *rl_quote_func_t (char *, int, char *);
+
+@item typedef char *rl_dequote_func_t (char *, int);
+
+@item typedef int rl_compignore_func_t (char **);
+
+@item typedef void rl_compdisp_func_t (char **, int, int);
+
+@item typedef int rl_hook_func_t (void);
+
+@item typedef int rl_getc_func_t (FILE *);
+
+@item typedef int rl_linebuf_func_t (char *, int);
+
+@item typedef int rl_intfunc_t (int);
+@item #define rl_ivoidfunc_t rl_hook_func_t
+@item typedef int rl_icpfunc_t (char *);
+@item typedef int rl_icppfunc_t (char **);
+
+@item typedef void rl_voidfunc_t (void);
+@item typedef void rl_vintfunc_t (int);
+@item typedef void rl_vcpfunc_t (char *);
+@item typedef void rl_vcppfunc_t (char **);
+
+@end table
+
+@node Function Writing
+@subsection Writing a New Function
+
+In order to write new functions for Readline, you need to know the
+calling conventions for keyboard-invoked functions, and the names of the
+variables that describe the current state of the line read so far.
+
+The calling sequence for a command @code{foo} looks like
+
+@example
+@code{int foo (int count, int key)}
+@end example
+
+@noindent
+where @var{count} is the numeric argument (or 1 if defaulted) and
+@var{key} is the key that invoked this function.
+
+It is completely up to the function as to what should be done with the
+numeric argument.  Some functions use it as a repeat count, some
+as a flag, and others to choose alternate behavior (refreshing the current
+line as opposed to refreshing the screen, for example).  Some choose to
+ignore it.  In general, if a
+function uses the numeric argument as a repeat count, it should be able
+to do something useful with both negative and positive arguments.
+At the very least, it should be aware that it can be passed a
+negative argument.
+
+A command function should return 0 if its action completes successfully,
+and a value greater than zero if some error occurs.
+This is the convention obeyed by all of the builtin Readline bindable
+command functions.
+
+@node Readline Variables
+@section Readline Variables
+
+These variables are available to function writers.
+
+@deftypevar {char *} rl_line_buffer
+This is the line gathered so far.  You are welcome to modify the
+contents of the line, but see @ref{Allowing Undoing}.  The
+function @code{rl_extend_line_buffer} is available to increase
+the memory allocated to @code{rl_line_buffer}.
+@end deftypevar
+
+@deftypevar int rl_point
+The offset of the current cursor position in @code{rl_line_buffer}
+(the @emph{point}).
+@end deftypevar
+
+@deftypevar int rl_end
+The number of characters present in @code{rl_line_buffer}.  When
+@code{rl_point} is at the end of the line, @code{rl_point} and
+@code{rl_end} are equal.
+@end deftypevar
+
+@deftypevar int rl_mark
+The @var{mark} (saved position) in the current line.  If set, the mark
+and point define a @emph{region}.
+@end deftypevar
+
+@deftypevar int rl_done
+Setting this to a non-zero value causes Readline to return the current
+line immediately.
+@end deftypevar
+
+@deftypevar int rl_num_chars_to_read
+Setting this to a positive value before calling @code{readline()} causes
+Readline to return after accepting that many characters, rather
+than reading up to a character bound to @code{accept-line}.
+@end deftypevar
+
+@deftypevar int rl_pending_input
+Setting this to a value makes it the next keystroke read.  This is a
+way to stuff a single character into the input stream.
+@end deftypevar
+
+@deftypevar int rl_dispatching
+Set to a non-zero value if a function is being called from a key binding;
+zero otherwise.  Application functions can test this to discover whether
+they were called directly or by Readline's dispatching mechanism.
+@end deftypevar
+
+@deftypevar int rl_erase_empty_line
+Setting this to a non-zero value causes Readline to completely erase
+the current line, including any prompt, any time a newline is typed as
+the only character on an otherwise-empty line.  The cursor is moved to
+the beginning of the newly-blank line.
+@end deftypevar
+
+@deftypevar {char *} rl_prompt
+The prompt Readline uses.  This is set from the argument to
+@code{readline()}, and should not be assigned to directly.
+The @code{rl_set_prompt()} function (@pxref{Redisplay}) may
+be used to modify the prompt string after calling @code{readline()}.
+@end deftypevar
+
+@deftypevar {char *} rl_display_prompt
+The string displayed as the prompt.  This is usually identical to
+@var{rl_prompt}, but may be changed temporarily by functions that
+use the prompt string as a message area, such as incremental search.
+@end deftypevar
+
+@deftypevar int rl_already_prompted
+If an application wishes to display the prompt itself, rather than have
+Readline do it the first time @code{readline()} is called, it should set
+this variable to a non-zero value after displaying the prompt.
+The prompt must also be passed as the argument to @code{readline()} so
+the redisplay functions can update the display properly.
+The calling application is responsible for managing the value; Readline
+never sets it.
+@end deftypevar
+
+@deftypevar {const char *} rl_library_version
+The version number of this revision of the library.
+@end deftypevar
+
+@deftypevar int rl_readline_version
+An integer encoding the current version of the library.  The encoding is
+of the form 0x@var{MMmm}, where @var{MM} is the two-digit major version
+number, and @var{mm} is the two-digit minor version number.
+For example, for Readline-4.2, @code{rl_readline_version} would have the
+value 0x0402.
+@end deftypevar
+
+@deftypevar {int} rl_gnu_readline_p
+Always set to 1, denoting that this is @sc{gnu} readline rather than some
+emulation.
+@end deftypevar
+
+@deftypevar {const char *} rl_terminal_name
+The terminal type, used for initialization.  If not set by the application,
+Readline sets this to the value of the @env{TERM} environment variable
+the first time it is called.
+@end deftypevar
+
+@deftypevar {const char *} rl_readline_name
+This variable is set to a unique name by each application using Readline.
+The value allows conditional parsing of the inputrc file
+(@pxref{Conditional Init Constructs}).
+@end deftypevar
+
+@deftypevar {FILE *} rl_instream
+The stdio stream from which Readline reads input.
+If @code{NULL}, Readline defaults to @var{stdin}.
+@end deftypevar
+
+@deftypevar {FILE *} rl_outstream
+The stdio stream to which Readline performs output.
+If @code{NULL}, Readline defaults to @var{stdout}.
+@end deftypevar
+
+@deftypevar int rl_prefer_env_winsize
+If non-zero, Readline gives values found in the @env{LINES} and
+@env{COLUMNS} environment variables greater precedence than values fetched
+from the kernel when computing the screen dimensions.
+@end deftypevar
+
+@deftypevar {rl_command_func_t *} rl_last_func
+The address of the last command function Readline executed.  May be used to
+test whether or not a function is being executed twice in succession, for
+example.
+@end deftypevar
+
+@deftypevar {rl_hook_func_t *} rl_startup_hook
+If non-zero, this is the address of a function to call just
+before @code{readline} prints the first prompt.
+@end deftypevar
+
+@deftypevar {rl_hook_func_t *} rl_pre_input_hook
+If non-zero, this is the address of a function to call after
+the first prompt has been printed and just before @code{readline}
+starts reading input characters.
+@end deftypevar
+
+@deftypevar {rl_hook_func_t *} rl_event_hook
+If non-zero, this is the address of a function to call periodically
+when Readline is waiting for terminal input.
+By default, this will be called at most ten times a second if there
+is no keyboard input.
+@end deftypevar
+
+@deftypevar {rl_getc_func_t *} rl_getc_function
+If non-zero, Readline will call indirectly through this pointer
+to get a character from the input stream.  By default, it is set to
+@code{rl_getc}, the default Readline character input function
+(@pxref{Character Input}).
+In general, an application that sets @var{rl_getc_function} should consider
+setting @var{rl_input_available_hook} as well.
+@end deftypevar
+
+@deftypevar {rl_hook_func_t *} rl_signal_event_hook
+If non-zero, this is the address of a function to call if a read system
+call is interrupted when Readline is reading terminal input.
+@end deftypevar
+
+@deftypevar {rl_hook_func_t *} rl_input_available_hook
+If non-zero, Readline will use this function's return value when it needs
+to determine whether or not there is available input on the current input
+source.
+The default hook checks @code{rl_instream}; if an application is using a
+different input source, it should set the hook appropriately.
+Readline queries for available input when implementing intra-key-sequence
+timeouts during input and incremental searches.
+This may use an application-specific timeout before returning a value;
+Readline uses the value passed to @code{rl_set_keyboard_input_timeout()}
+or the value of the user-settable @var{keyseq-timeout} variable.
+This is designed for use by applications using Readline's callback interface
+(@pxref{Alternate Interface}), which may not use the traditional
+@code{read(2)} and file descriptor interface, or other applications using
+a different input mechanism.
+If an application uses an input mechanism or hook that can potentially exceed
+the value of @var{keyseq-timeout}, it should increase the timeout or set
+this hook appropriately even when not using the callback interface.
+In general, an application that sets @var{rl_getc_function} should consider
+setting @var{rl_input_available_hook} as well.
+@end deftypevar
+
+@deftypevar {rl_voidfunc_t *} rl_redisplay_function
+If non-zero, Readline will call indirectly through this pointer
+to update the display with the current contents of the editing buffer.
+By default, it is set to @code{rl_redisplay}, the default Readline
+redisplay function (@pxref{Redisplay}).
+@end deftypevar
+
+@deftypevar {rl_vintfunc_t *} rl_prep_term_function
+If non-zero, Readline will call indirectly through this pointer
+to initialize the terminal.  The function takes a single argument, an
+@code{int} flag that says whether or not to use eight-bit characters.
+By default, this is set to @code{rl_prep_terminal}
+(@pxref{Terminal Management}).
+@end deftypevar
+
+@deftypevar {rl_voidfunc_t *} rl_deprep_term_function
+If non-zero, Readline will call indirectly through this pointer
+to reset the terminal.  This function should undo the effects of
+@code{rl_prep_term_function}.
+By default, this is set to @code{rl_deprep_terminal}
+(@pxref{Terminal Management}).
+@end deftypevar
+
+@deftypevar {Keymap} rl_executing_keymap
+This variable is set to the keymap (@pxref{Keymaps}) in which the
+currently executing readline function was found.
+@end deftypevar 
+
+@deftypevar {Keymap} rl_binding_keymap
+This variable is set to the keymap (@pxref{Keymaps}) in which the
+last key binding occurred.
+@end deftypevar 
+
+@deftypevar {char *} rl_executing_macro
+This variable is set to the text of any currently-executing macro.
+@end deftypevar
+
+@deftypevar int rl_executing_key
+The key that caused the dispatch to the currently-executing Readline function.
+@end deftypevar
+
+@deftypevar {char *} rl_executing_keyseq
+The full key sequence that caused the dispatch to the currently-executing
+Readline function.
+@end deftypevar
+
+@deftypevar int rl_key_sequence_length
+The number of characters in @var{rl_executing_keyseq}.
+@end deftypevar
+
+@deftypevar {int} rl_readline_state
+A variable with bit values that encapsulate the current Readline state.
+A bit is set with the @code{RL_SETSTATE} macro, and unset with the
+@code{RL_UNSETSTATE} macro.  Use the @code{RL_ISSTATE} macro to test
+whether a particular state bit is set.  Current state bits include:
+
+@table @code
+@item RL_STATE_NONE
+Readline has not yet been called, nor has it begun to initialize.
+@item RL_STATE_INITIALIZING
+Readline is initializing its internal data structures.
+@item RL_STATE_INITIALIZED
+Readline has completed its initialization.
+@item RL_STATE_TERMPREPPED
+Readline has modified the terminal modes to do its own input and redisplay.
+@item RL_STATE_READCMD
+Readline is reading a command from the keyboard.
+@item RL_STATE_METANEXT
+Readline is reading more input after reading the meta-prefix character.
+@item RL_STATE_DISPATCHING
+Readline is dispatching to a command.
+@item RL_STATE_MOREINPUT
+Readline is reading more input while executing an editing command.
+@item RL_STATE_ISEARCH
+Readline is performing an incremental history search.
+@item RL_STATE_NSEARCH
+Readline is performing a non-incremental history search.
+@item RL_STATE_SEARCH
+Readline is searching backward or forward through the history for a string.
+@item RL_STATE_NUMERICARG
+Readline is reading a numeric argument.
+@item RL_STATE_MACROINPUT
+Readline is currently getting its input from a previously-defined keyboard
+macro.
+@item RL_STATE_MACRODEF
+Readline is currently reading characters defining a keyboard macro.
+@item RL_STATE_OVERWRITE
+Readline is in overwrite mode.
+@item RL_STATE_COMPLETING
+Readline is performing word completion.
+@item RL_STATE_SIGHANDLER
+Readline is currently executing the readline signal handler.
+@item RL_STATE_UNDOING
+Readline is performing an undo.
+@item RL_STATE_INPUTPENDING
+Readline has input pending due to a call to @code{rl_execute_next()}.
+@item RL_STATE_TTYCSAVED
+Readline has saved the values of the terminal's special characters.
+@item RL_STATE_CALLBACK
+Readline is currently using the alternate (callback) interface
+(@pxref{Alternate Interface}).
+@item RL_STATE_VIMOTION
+Readline is reading the argument to a vi-mode "motion" command.
+@item RL_STATE_MULTIKEY
+Readline is reading a multiple-keystroke command.
+@item RL_STATE_VICMDONCE
+Readline has entered vi command (movement) mode at least one time during
+the current call to @code{readline()}.
+@item RL_STATE_DONE
+Readline has read a key sequence bound to @code{accept-line}
+and is about to return the line to the caller.
+@end table
+
+@end deftypevar
+
+@deftypevar {int} rl_explicit_arg
+Set to a non-zero value if an explicit numeric argument was specified by
+the user.  Only valid in a bindable command function.
+@end deftypevar
+
+@deftypevar {int} rl_numeric_arg
+Set to the value of any numeric argument explicitly specified by the user
+before executing the current Readline function.  Only valid in a bindable
+command function.
+@end deftypevar
+
+@deftypevar {int} rl_editing_mode
+Set to a value denoting Readline's current editing mode.  A value of
+@var{1} means Readline is currently in emacs mode; @var{0}
+means that vi mode is active.
+@end deftypevar
+
+
+@node Readline Convenience Functions
+@section Readline Convenience Functions
+
+@menu
+* Function Naming::	How to give a function you write a name.
+* Keymaps::		Making keymaps.
+* Binding Keys::	Changing Keymaps.
+* Associating Function Names and Bindings::	Translate function names to
+						key sequences.
+* Allowing Undoing::	How to make your functions undoable.
+* Redisplay::		Functions to control line display.
+* Modifying Text::	Functions to modify @code{rl_line_buffer}.
+* Character Input::	Functions to read keyboard input.
+* Terminal Management::	Functions to manage terminal settings.
+* Utility Functions::	Generally useful functions and hooks.
+* Miscellaneous Functions::	Functions that don't fall into any category.
+* Alternate Interface::	Using Readline in a `callback' fashion.
+* A Readline Example::		An example Readline function.
+* Alternate Interface Example::	An example program using the alternate interface.
+@end menu
+
+@node Function Naming
+@subsection Naming a Function
+
+The user can dynamically change the bindings of keys while using
+Readline.  This is done by representing the function with a descriptive
+name.  The user is able to type the descriptive name when referring to
+the function.  Thus, in an init file, one might find
+
+@example
+Meta-Rubout:	backward-kill-word
+@end example
+
+This binds the keystroke @key{Meta-Rubout} to the function
+@emph{descriptively} named @code{backward-kill-word}.  You, as the
+programmer, should bind the functions you write to descriptive names as
+well.  Readline provides a function for doing that:
+
+@deftypefun int rl_add_defun (const char *name, rl_command_func_t *function, int key)
+Add @var{name} to the list of named functions.  Make @var{function} be
+the function that gets called.  If @var{key} is not -1, then bind it to
+@var{function} using @code{rl_bind_key()}.
+@end deftypefun
+
+Using this function alone is sufficient for most applications.
+It is the recommended way to add a few functions to the default
+functions that Readline has built in.
+If you need to do something other than adding a function to Readline,
+you may need to use the underlying functions described below.
+
+@node Keymaps
+@subsection Selecting a Keymap
+
+Key bindings take place on a @dfn{keymap}.  The keymap is the
+association between the keys that the user types and the functions that
+get run.  You can make your own keymaps, copy existing keymaps, and tell
+Readline which keymap to use.
+
+@deftypefun Keymap rl_make_bare_keymap (void)
+Returns a new, empty keymap.  The space for the keymap is allocated with
+@code{malloc()}; the caller should free it by calling
+@code{rl_free_keymap()} when done.
+@end deftypefun
+
+@deftypefun Keymap rl_copy_keymap (Keymap map)
+Return a new keymap which is a copy of @var{map}.
+@end deftypefun
+
+@deftypefun Keymap rl_make_keymap (void)
+Return a new keymap with the printing characters bound to rl_insert,
+the lowercase Meta characters bound to run their equivalents, and
+the Meta digits bound to produce numeric arguments.
+@end deftypefun
+
+@deftypefun void rl_discard_keymap (Keymap keymap)
+Free the storage associated with the data in @var{keymap}.
+The caller should free @var{keymap}.
+@end deftypefun
+
+@deftypefun void rl_free_keymap (Keymap keymap)
+Free all storage associated with @var{keymap}.  This calls
+@code{rl_discard_keymap} to free subordindate keymaps and macros.
+@end deftypefun
+
+@deftypefun int rl_empty_keymap (Keymap keymap)
+Return non-zero if there are no keys bound to functions in @var{keymap};
+zero if there are any keys bound.
+@end deftypefun
+
+Readline has several internal keymaps.  These functions allow you to
+change which keymap is active.
+
+@deftypefun Keymap rl_get_keymap (void)
+Returns the currently active keymap.
+@end deftypefun
+
+@deftypefun void rl_set_keymap (Keymap keymap)
+Makes @var{keymap} the currently active keymap.
+@end deftypefun
+
+@deftypefun Keymap rl_get_keymap_by_name (const char *name)
+Return the keymap matching @var{name}.  @var{name} is one which would
+be supplied in a @code{set keymap} inputrc line (@pxref{Readline Init File}).
+@end deftypefun
+
+@deftypefun {char *} rl_get_keymap_name (Keymap keymap)
+Return the name matching @var{keymap}.  @var{name} is one which would
+be supplied in a @code{set keymap} inputrc line (@pxref{Readline Init File}).
+@end deftypefun
+
+@deftypefun int rl_set_keymap_name (const char *name, Keymap keymap)
+Set the name of @var{keymap}.  This name will then be "registered" and
+available for use in a @code{set keymap} inputrc directive
+@pxref{Readline Init File}).
+The @var{name} may not be one of Readline's builtin keymap names;
+you may not add a different name for one of Readline's builtin keymaps.
+You may replace the name associated with a given keymap by calling this
+function more than once with the same @var{keymap} argument.
+You may associate a registered @var{name} with a new keymap by calling this
+function more than once  with the same @var{name} argument.
+There is no way to remove a named keymap once the name has been
+registered.
+Readline will make a copy of @var{name}.
+The return value is greater than zero unless @var{name} is one of
+Readline's builtin keymap names or @var{keymap} is one of Readline's
+builtin keymaps.
+@end deftypefun
+
+@node Binding Keys
+@subsection Binding Keys
+
+Key sequences are associate with functions through the keymap.
+Readline has several internal keymaps: @code{emacs_standard_keymap},
+@code{emacs_meta_keymap}, @code{emacs_ctlx_keymap},
+@code{vi_movement_keymap}, and @code{vi_insertion_keymap}.
+@code{emacs_standard_keymap} is the default, and the examples in
+this manual assume that.
+
+Since @code{readline()} installs a set of default key bindings the first
+time it is called, there is always the danger that a custom binding
+installed before the first call to @code{readline()} will be overridden.
+An alternate mechanism is to install custom key bindings in an
+initialization function assigned to the @code{rl_startup_hook} variable
+(@pxref{Readline Variables}).
+
+These functions manage key bindings.
+
+@deftypefun int rl_bind_key (int key, rl_command_func_t *function)
+Binds @var{key} to @var{function} in the currently active keymap.
+Returns non-zero in the case of an invalid @var{key}.
+@end deftypefun
+
+@deftypefun int rl_bind_key_in_map (int key, rl_command_func_t *function, Keymap map)
+Bind @var{key} to @var{function} in @var{map}.
+Returns non-zero in the case of an invalid @var{key}.
+@end deftypefun
+
+@deftypefun int rl_bind_key_if_unbound (int key, rl_command_func_t *function)
+Binds @var{key} to @var{function} if it is not already bound in the
+currently active keymap.
+Returns non-zero in the case of an invalid @var{key} or if @var{key} is
+already bound.
+@end deftypefun
+
+@deftypefun int rl_bind_key_if_unbound_in_map (int key, rl_command_func_t *function, Keymap map)
+Binds @var{key} to @var{function} if it is not already bound in @var{map}.
+Returns non-zero in the case of an invalid @var{key} or if @var{key} is
+already bound.
+@end deftypefun
+
+@deftypefun int rl_unbind_key (int key)
+Bind @var{key} to the null function in the currently active keymap.
+Returns non-zero in case of error.
+@end deftypefun
+
+@deftypefun int rl_unbind_key_in_map (int key, Keymap map)
+Bind @var{key} to the null function in @var{map}.
+Returns non-zero in case of error.
+@end deftypefun
+
+@deftypefun int rl_unbind_function_in_map (rl_command_func_t *function, Keymap map)
+Unbind all keys that execute @var{function} in @var{map}.
+@end deftypefun
+
+@deftypefun int rl_unbind_command_in_map (const char *command, Keymap map)
+Unbind all keys that are bound to @var{command} in @var{map}.
+@end deftypefun
+
+@deftypefun int rl_bind_keyseq (const char *keyseq, rl_command_func_t *function)
+Bind the key sequence represented by the string @var{keyseq} to the function
+@var{function}, beginning in the current keymap.
+This makes new keymaps as necessary.
+The return value is non-zero if @var{keyseq} is invalid.
+@end deftypefun
+
+@deftypefun int rl_bind_keyseq_in_map (const char *keyseq, rl_command_func_t *function, Keymap map)
+Bind the key sequence represented by the string @var{keyseq} to the function
+@var{function}.  This makes new keymaps as necessary.
+Initial bindings are performed in @var{map}.
+The return value is non-zero if @var{keyseq} is invalid.
+@end deftypefun
+
+@deftypefun int rl_set_key (const char *keyseq, rl_command_func_t *function, Keymap map)
+Equivalent to @code{rl_bind_keyseq_in_map}.
+@end deftypefun
+
+@deftypefun int rl_bind_keyseq_if_unbound (const char *keyseq, rl_command_func_t *function)
+Binds @var{keyseq} to @var{function} if it is not already bound in the
+currently active keymap.
+Returns non-zero in the case of an invalid @var{keyseq} or if @var{keyseq} is
+already bound.
+@end deftypefun
+
+@deftypefun int rl_bind_keyseq_if_unbound_in_map (const char *keyseq, rl_command_func_t *function, Keymap map)
+Binds @var{keyseq} to @var{function} if it is not already bound in @var{map}.
+Returns non-zero in the case of an invalid @var{keyseq} or if @var{keyseq} is
+already bound.
+@end deftypefun
+
+@deftypefun int rl_generic_bind (int type, const char *keyseq, char *data, Keymap map)
+Bind the key sequence represented by the string @var{keyseq} to the arbitrary
+pointer @var{data}.  @var{type} says what kind of data is pointed to by
+@var{data}; this can be a function (@code{ISFUNC}), a macro
+(@code{ISMACR}), or a keymap (@code{ISKMAP}).  This makes new keymaps as
+necessary.  The initial keymap in which to do bindings is @var{map}.
+@end deftypefun
+
+@deftypefun int rl_parse_and_bind (char *line)
+Parse @var{line} as if it had been read from the @code{inputrc} file and
+perform any key bindings and variable assignments found
+(@pxref{Readline Init File}).
+@end deftypefun
+
+@deftypefun int rl_read_init_file (const char *filename)
+Read keybindings and variable assignments from @var{filename}
+(@pxref{Readline Init File}).
+@end deftypefun
+
+@node Associating Function Names and Bindings
+@subsection Associating Function Names and Bindings
+
+These functions allow you to find out what keys invoke named functions
+and the functions invoked by a particular key sequence.  You may also
+associate a new function name with an arbitrary function.
+
+@deftypefun {rl_command_func_t *} rl_named_function (const char *name)
+Return the function with name @var{name}.
+@end deftypefun
+
+@deftypefun {rl_command_func_t *} rl_function_of_keyseq (const char *keyseq, Keymap map, int *type)
+Return the function invoked by @var{keyseq} in keymap @var{map}.
+If @var{map} is @code{NULL}, the current keymap is used.  If @var{type} is
+not @code{NULL}, the type of the object is returned in the @code{int} variable
+it points to (one of @code{ISFUNC}, @code{ISKMAP}, or @code{ISMACR}).
+It takes a "translated" key sequence and should not be used if the key sequence
+can include NUL.
+@end deftypefun
+
+@deftypefun {rl_command_func_t *} rl_function_of_keyseq_len (const char *keyseq, size_t len, Keymap map, int *type)
+Return the function invoked by @var{keyseq} of length @var{len}
+in keymap @var{map}. Equivalent to @code{rl_function_of_keyseq} with the
+addition of the @var{len} parameter.
+It takes a "translated" key sequence and should be used if the key sequence
+can include NUL.
+@end deftypefun
+
+@deftypefun {char **} rl_invoking_keyseqs (rl_command_func_t *function)
+Return an array of strings representing the key sequences used to
+invoke @var{function} in the current keymap.
+@end deftypefun
+
+@deftypefun {char **} rl_invoking_keyseqs_in_map (rl_command_func_t *function, Keymap map)
+Return an array of strings representing the key sequences used to
+invoke @var{function} in the keymap @var{map}.
+@end deftypefun
+
+@deftypefun void rl_function_dumper (int readable)
+Print the readline function names and the key sequences currently
+bound to them to @code{rl_outstream}.  If @var{readable} is non-zero,
+the list is formatted in such a way that it can be made part of an
+@code{inputrc} file and re-read.
+@end deftypefun
+
+@deftypefun void rl_list_funmap_names (void)
+Print the names of all bindable Readline functions to @code{rl_outstream}.
+@end deftypefun
+
+@deftypefun {const char **} rl_funmap_names (void)
+Return a NULL terminated array of known function names.  The array is
+sorted.  The array itself is allocated, but not the strings inside.  You
+should free the array, but not the pointers, using @code{free} or
+@code{rl_free} when you are done.
+@end deftypefun
+
+@deftypefun int rl_add_funmap_entry (const char *name, rl_command_func_t *function)
+Add @var{name} to the list of bindable Readline command names, and make
+@var{function} the function to be called when @var{name} is invoked.
+@end deftypefun
+
+@node Allowing Undoing
+@subsection Allowing Undoing
+
+Supporting the undo command is a painless thing, and makes your
+functions much more useful.  It is certainly easy to try
+something if you know you can undo it.
+
+If your function simply inserts text once, or deletes text once, and
+uses @code{rl_insert_text()} or @code{rl_delete_text()} to do it, then
+undoing is already done for you automatically.
+
+If you do multiple insertions or multiple deletions, or any combination
+of these operations, you should group them together into one operation.
+This is done with @code{rl_begin_undo_group()} and
+@code{rl_end_undo_group()}.
+
+The types of events that can be undone are:
+
+@smallexample
+enum undo_code @{ UNDO_DELETE, UNDO_INSERT, UNDO_BEGIN, UNDO_END @}; 
+@end smallexample
+
+Notice that @code{UNDO_DELETE} means to insert some text, and
+@code{UNDO_INSERT} means to delete some text.  That is, the undo code
+tells what to undo, not how to undo it.  @code{UNDO_BEGIN} and
+@code{UNDO_END} are tags added by @code{rl_begin_undo_group()} and
+@code{rl_end_undo_group()}.
+
+@deftypefun int rl_begin_undo_group (void)
+Begins saving undo information in a group construct.  The undo
+information usually comes from calls to @code{rl_insert_text()} and
+@code{rl_delete_text()}, but could be the result of calls to
+@code{rl_add_undo()}.
+@end deftypefun
+
+@deftypefun int rl_end_undo_group (void)
+Closes the current undo group started with @code{rl_begin_undo_group
+()}.  There should be one call to @code{rl_end_undo_group()}
+for each call to @code{rl_begin_undo_group()}.
+@end deftypefun
+
+@deftypefun void rl_add_undo (enum undo_code what, int start, int end, char *text)
+Remember how to undo an event (according to @var{what}).  The affected
+text runs from @var{start} to @var{end}, and encompasses @var{text}.
+@end deftypefun
+
+@deftypefun void rl_free_undo_list (void)
+Free the existing undo list.
+@end deftypefun
+
+@deftypefun int rl_do_undo (void)
+Undo the first thing on the undo list.  Returns @code{0} if there was
+nothing to undo, non-zero if something was undone.
+@end deftypefun
+
+Finally, if you neither insert nor delete text, but directly modify the
+existing text (e.g., change its case), call @code{rl_modifying()}
+once, just before you modify the text.  You must supply the indices of
+the text range that you are going to modify.
+
+@deftypefun int rl_modifying (int start, int end)
+Tell Readline to save the text between @var{start} and @var{end} as a
+single undo unit.  It is assumed that you will subsequently modify
+that text.
+@end deftypefun
+
+@node Redisplay
+@subsection Redisplay
+
+@deftypefun void rl_redisplay (void)
+Change what's displayed on the screen to reflect the current contents
+of @code{rl_line_buffer}.
+@end deftypefun
+
+@deftypefun int rl_forced_update_display (void)
+Force the line to be updated and redisplayed, whether or not
+Readline thinks the screen display is correct.
+@end deftypefun
+
+@deftypefun int rl_on_new_line (void)
+Tell the update functions that we have moved onto a new (empty) line,
+usually after outputting a newline.
+@end deftypefun
+
+@deftypefun int rl_on_new_line_with_prompt (void)
+Tell the update functions that we have moved onto a new line, with
+@var{rl_prompt} already displayed.
+This could be used by applications that want to output the prompt string
+themselves, but still need Readline to know the prompt string length for
+redisplay.
+It should be used after setting @var{rl_already_prompted}.
+@end deftypefun
+
+@deftypefun int rl_clear_visible_line (void)
+Clear the screen lines corresponding to the current line's contents.
+@end deftypefun
+
+@deftypefun int rl_reset_line_state (void)
+Reset the display state to a clean state and redisplay the current line
+starting on a new line.
+@end deftypefun
+
+@deftypefun int rl_crlf (void)
+Move the cursor to the start of the next screen line.
+@end deftypefun
+
+@deftypefun int rl_show_char (int c)
+Display character @var{c} on @code{rl_outstream}.
+If Readline has not been set to display meta characters directly, this
+will convert meta characters to a meta-prefixed key sequence.
+This is intended for use by applications which wish to do their own
+redisplay.
+@end deftypefun
+
+@deftypefun int rl_message (const char *, @dots{})
+The arguments are a format string as would be supplied to @code{printf},
+possibly containing conversion specifications such as @samp{%d}, and
+any additional arguments necessary to satisfy the conversion specifications.
+The resulting string is displayed in the @dfn{echo area}.  The echo area
+is also used to display numeric arguments and search strings.
+You should call @code{rl_save_prompt} to save the prompt information
+before calling this function.
+@end deftypefun
+
+@deftypefun int rl_clear_message (void)
+Clear the message in the echo area.  If the prompt was saved with a call to
+@code{rl_save_prompt} before the last call to @code{rl_message},
+call @code{rl_restore_prompt} before calling this function.
+@end deftypefun
+
+@deftypefun void rl_save_prompt (void)
+Save the local Readline prompt display state in preparation for
+displaying a new message in the message area with @code{rl_message()}.
+@end deftypefun
+
+@deftypefun void rl_restore_prompt (void)
+Restore the local Readline prompt display state saved by the most
+recent call to @code{rl_save_prompt}.
+if @code{rl_save_prompt} was called to save the prompt before a call
+to @code{rl_message}, this function should be called before the
+corresponding call to @code{rl_clear_message}.
+@end deftypefun
+
+@deftypefun int rl_expand_prompt (char *prompt)
+Expand any special character sequences in @var{prompt} and set up the
+local Readline prompt redisplay variables.
+This function is called by @code{readline()}.  It may also be called to
+expand the primary prompt if the @code{rl_on_new_line_with_prompt()}
+function or @code{rl_already_prompted} variable is used.
+It returns the number of visible characters on the last line of the
+(possibly multi-line) prompt.
+Applications may indicate that the prompt contains characters that take
+up no physical screen space when displayed by bracketing a sequence of
+such characters with the special markers @code{RL_PROMPT_START_IGNORE}
+and @code{RL_PROMPT_END_IGNORE} (declared in @file{readline.h}).  This may
+be used to embed terminal-specific escape sequences in prompts.
+@end deftypefun
+
+@deftypefun int rl_set_prompt (const char *prompt)
+Make Readline use @var{prompt} for subsequent redisplay.  This calls
+@code{rl_expand_prompt()} to expand the prompt and sets @code{rl_prompt}
+to the result.
+@end deftypefun
+
+@node Modifying Text
+@subsection Modifying Text
+
+@deftypefun int rl_insert_text (const char *text)
+Insert @var{text} into the line at the current cursor position.
+Returns the number of characters inserted.
+@end deftypefun
+
+@deftypefun int rl_delete_text (int start, int end)
+Delete the text between @var{start} and @var{end} in the current line.
+Returns the number of characters deleted.
+@end deftypefun
+
+@deftypefun {char *} rl_copy_text (int start, int end)
+Return a copy of the text between @var{start} and @var{end} in
+the current line.
+@end deftypefun
+
+@deftypefun int rl_kill_text (int start, int end)
+Copy the text between @var{start} and @var{end} in the current line
+to the kill ring, appending or prepending to the last kill if the
+last command was a kill command.  The text is deleted.
+If @var{start} is less than @var{end},
+the text is appended, otherwise prepended.  If the last command was
+not a kill, a new kill ring slot is used.
+@end deftypefun
+
+@deftypefun int rl_push_macro_input (char *macro)
+Cause @var{macro} to be inserted into the line, as if it had been invoked
+by a key bound to a macro.  Not especially useful; use
+@code{rl_insert_text()} instead.
+@end deftypefun
+
+@node Character Input
+@subsection Character Input
+
+@deftypefun int rl_read_key (void)
+Return the next character available from Readline's current input stream.
+This handles input inserted into
+the input stream via @var{rl_pending_input} (@pxref{Readline Variables})
+and @code{rl_stuff_char()}, macros, and characters read from the keyboard.
+While waiting for input, this function will call any function assigned to
+the @code{rl_event_hook} variable.
+@end deftypefun
+
+@deftypefun int rl_getc (FILE *stream)
+Return the next character available from @var{stream}, which is assumed to
+be the keyboard.
+@end deftypefun
+
+@deftypefun int rl_stuff_char (int c)
+Insert @var{c} into the Readline input stream.  It will be "read"
+before Readline attempts to read characters from the terminal with
+@code{rl_read_key()}.  Up to 512 characters may be pushed back.
+@code{rl_stuff_char} returns 1 if the character was successfully inserted;
+0 otherwise.
+@end deftypefun
+
+@deftypefun int rl_execute_next (int c)
+Make @var{c} be the next command to be executed when @code{rl_read_key()}
+is called.  This sets @var{rl_pending_input}.
+@end deftypefun
+
+@deftypefun int rl_clear_pending_input (void)
+Unset @var{rl_pending_input}, effectively negating the effect of any
+previous call to @code{rl_execute_next()}.  This works only if the
+pending input has not already been read with @code{rl_read_key()}.
+@end deftypefun
+
+@deftypefun int rl_set_keyboard_input_timeout (int u)
+While waiting for keyboard input in @code{rl_read_key()}, Readline will
+wait for @var{u} microseconds for input before calling any function
+assigned to @code{rl_event_hook}.  @var{u} must be greater than or equal
+to zero (a zero-length timeout is equivalent to a poll).
+The default waiting period is one-tenth of a second.
+Returns the old timeout value.
+@end deftypefun
+
+@node Terminal Management
+@subsection Terminal Management
+
+@deftypefun void rl_prep_terminal (int meta_flag)
+Modify the terminal settings for Readline's use, so @code{readline()}
+can read a single character at a time from the keyboard.
+The @var{meta_flag} argument should be non-zero if Readline should
+read eight-bit input.
+@end deftypefun
+
+@deftypefun void rl_deprep_terminal (void)
+Undo the effects of @code{rl_prep_terminal()}, leaving the terminal in
+the state in which it was before the most recent call to
+@code{rl_prep_terminal()}.
+@end deftypefun
+
+@deftypefun void rl_tty_set_default_bindings (Keymap kmap)
+Read the operating system's terminal editing characters (as would be
+displayed by @code{stty}) to their Readline equivalents.
+The bindings are performed in @var{kmap}.
+@end deftypefun
+
+@deftypefun void rl_tty_unset_default_bindings (Keymap kmap)
+Reset the bindings manipulated by @code{rl_tty_set_default_bindings} so
+that the terminal editing characters are bound to @code{rl_insert}.
+The bindings are performed in @var{kmap}.
+@end deftypefun
+
+@deftypefun int rl_tty_set_echoing (int value)
+Set Readline's idea of whether or not it is echoing output to its output
+stream (@var{rl_outstream}).  If @var{value} is 0, Readline does not display
+output to @var{rl_outstream}; any other value enables output.  The initial
+value is set when Readline initializes the terminal settings.
+This function returns the previous value.
+@end deftypefun
+
+@deftypefun int rl_reset_terminal (const char *terminal_name)
+Reinitialize Readline's idea of the terminal settings using
+@var{terminal_name} as the terminal type (e.g., @code{vt100}).
+If @var{terminal_name} is @code{NULL}, the value of the @code{TERM}
+environment variable is used.
+@end deftypefun
+
+@node Utility Functions
+@subsection Utility Functions
+
+@deftypefun int rl_save_state (struct readline_state *sp)
+Save a snapshot of Readline's internal state to @var{sp}.
+The contents of the @var{readline_state} structure are documented
+in @file{readline.h}.
+The caller is responsible for allocating the structure.
+@end deftypefun
+
+@deftypefun int rl_restore_state (struct readline_state *sp)
+Restore Readline's internal state to that stored in @var{sp}, which must
+have been saved by a call to @code{rl_save_state}.
+The contents of the @var{readline_state} structure are documented
+in @file{readline.h}.
+The caller is responsible for freeing the structure.
+@end deftypefun
+
+@deftypefun void rl_free (void *mem)
+Deallocate the memory pointed to by @var{mem}.  @var{mem} must have been
+allocated by @code{malloc}.
+@end deftypefun
+
+@deftypefun void rl_replace_line (const char *text, int clear_undo)
+Replace the contents of @code{rl_line_buffer} with @var{text}.
+The point and mark are preserved, if possible.
+If @var{clear_undo} is non-zero, the undo list associated with the
+current line is cleared.
+@end deftypefun
+
+@deftypefun void rl_extend_line_buffer (int len)
+Ensure that @code{rl_line_buffer} has enough space to hold @var{len}
+characters, possibly reallocating it if necessary.
+@end deftypefun
+
+@deftypefun int rl_initialize (void)
+Initialize or re-initialize Readline's internal state.
+It's not strictly necessary to call this; @code{readline()} calls it before
+reading any input.
+@end deftypefun
+
+@deftypefun int rl_ding (void)
+Ring the terminal bell, obeying the setting of @code{bell-style}.
+@end deftypefun
+
+@deftypefun int rl_alphabetic (int c)
+Return 1 if @var{c} is an alphabetic character.
+@end deftypefun
+
+@deftypefun void rl_display_match_list (char **matches, int len, int max)
+A convenience function for displaying a list of strings in
+columnar format on Readline's output stream.  @code{matches} is the list
+of strings, in argv format, such as a list of completion matches.
+@code{len} is the number of strings in @code{matches}, and @code{max}
+is the length of the longest string in @code{matches}.  This function uses
+the setting of @code{print-completions-horizontally} to select how the
+matches are displayed (@pxref{Readline Init File Syntax}).
+When displaying completions, this function sets the number of columns used
+for display to the value of @code{completion-display-width}, the value of
+the environment variable @env{COLUMNS}, or the screen width, in that order.
+@end deftypefun
+
+The following are implemented as macros, defined in @code{chardefs.h}.
+Applications should refrain from using them.
+
+@deftypefun int _rl_uppercase_p (int c)
+Return 1 if @var{c} is an uppercase alphabetic character.
+@end deftypefun
+
+@deftypefun int _rl_lowercase_p (int c)
+Return 1 if @var{c} is a lowercase alphabetic character.
+@end deftypefun
+
+@deftypefun int _rl_digit_p (int c)
+Return 1 if @var{c} is a numeric character.
+@end deftypefun
+
+@deftypefun int _rl_to_upper (int c)
+If @var{c} is a lowercase alphabetic character, return the corresponding
+uppercase character.
+@end deftypefun
+
+@deftypefun int _rl_to_lower (int c)
+If @var{c} is an uppercase alphabetic character, return the corresponding
+lowercase character.
+@end deftypefun
+
+@deftypefun int _rl_digit_value (int c)
+If @var{c} is a number, return the value it represents.
+@end deftypefun
+
+@node Miscellaneous Functions
+@subsection Miscellaneous Functions
+
+@deftypefun int rl_macro_bind (const char *keyseq, const char *macro, Keymap map)
+Bind the key sequence @var{keyseq} to invoke the macro @var{macro}.
+The binding is performed in @var{map}.  When @var{keyseq} is invoked, the
+@var{macro} will be inserted into the line.  This function is deprecated;
+use @code{rl_generic_bind()} instead.
+@end deftypefun
+
+@deftypefun void rl_macro_dumper (int readable)
+Print the key sequences bound to macros and their values, using
+the current keymap, to @code{rl_outstream}.
+If @var{readable} is non-zero, the list is formatted in such a way
+that it can be made part of an @code{inputrc} file and re-read.
+@end deftypefun
+
+@deftypefun int rl_variable_bind (const char *variable, const char *value)
+Make the Readline variable @var{variable} have @var{value}.
+This behaves as if the readline command
+@samp{set @var{variable} @var{value}} had been executed in an @code{inputrc}
+file (@pxref{Readline Init File Syntax}).
+@end deftypefun
+
+@deftypefun {char *} rl_variable_value (const char *variable)
+Return a string representing the value of the Readline variable @var{variable}.
+For boolean variables, this string is either @samp{on} or @samp{off}.
+@end deftypefun
+
+@deftypefun void rl_variable_dumper (int readable)
+Print the readline variable names and their current values
+to @code{rl_outstream}.
+If @var{readable} is non-zero, the list is formatted in such a way
+that it can be made part of an @code{inputrc} file and re-read.
+@end deftypefun
+
+@deftypefun int rl_set_paren_blink_timeout (int u)
+Set the time interval (in microseconds) that Readline waits when showing
+a balancing character when @code{blink-matching-paren} has been enabled.
+@end deftypefun
+
+@deftypefun {char *} rl_get_termcap (const char *cap)
+Retrieve the string value of the termcap capability @var{cap}.
+Readline fetches the termcap entry for the current terminal name and
+uses those capabilities to move around the screen line and perform other
+terminal-specific operations, like erasing a line.  Readline does not
+use all of a terminal's capabilities, and this function will return
+values for only those capabilities Readline uses.
+@end deftypefun
+
+@deftypefun {void} rl_clear_history (void)
+Clear the history list by deleting all of the entries, in the same manner
+as the History library's @code{clear_history()} function.
+This differs from @code{clear_history} because it frees private data
+Readline saves in the history list.
+@end deftypefun
+
+@deftypefun {void} rl_activate_mark (void)
+Enable an @emph{active} mark.
+When this is enabled, the text between point and mark (the @var{region}) is
+displayed in the terminal's standout mode (a @var{face}).
+This is called by various readline functions that set the mark and insert
+text, and is available for applications to call.
+@end deftypefun
+
+@deftypefun {void} rl_deactivate_mark (void)
+Turn off the active mark.
+@end deftypefun
+
+@deftypefun {void} rl_keep_mark_active (void)
+Indicate that the mark should remain active when the current readline function
+completes and after redisplay occurs.
+In most cases, the mark remains active for only the duration of a single
+bindable readline function.
+@end deftypefun
+
+@deftypefun {int} rl_mark_active_p (void)
+Return a non-zero value if the mark is currently active; zero otherwise.
+@end deftypefun
+
+@node Alternate Interface
+@subsection Alternate Interface
+
+An alternate interface is available to plain @code{readline()}.  Some
+applications need to interleave keyboard I/O with file, device, or
+window system I/O, typically by using a main loop to @code{select()}
+on various file descriptors.  To accommodate this need, readline can
+also be invoked as a `callback' function from an event loop.  There
+are functions available to make this easy.
+
+@deftypefun void rl_callback_handler_install (const char *prompt, rl_vcpfunc_t *lhandler)
+Set up the terminal for readline I/O and display the initial
+expanded value of @var{prompt}.  Save the value of @var{lhandler} to
+use as a handler function to call when a complete line of input has been
+entered.
+The handler function receives the text of the line as an argument.
+As with @code{readline()}, the handler function should @code{free} the
+line when it it finished with it.
+@end deftypefun
+
+@deftypefun void rl_callback_read_char (void)
+Whenever an application determines that keyboard input is available, it
+should call @code{rl_callback_read_char()}, which will read the next
+character from the current input source.
+If that character completes the line, @code{rl_callback_read_char} will
+invoke the @var{lhandler} function installed by
+@code{rl_callback_handler_install} to process the line.
+Before calling the @var{lhandler} function, the terminal settings are
+reset to the values they had before calling
+@code{rl_callback_handler_install}.
+If the @var{lhandler} function returns,
+and the line handler remains installed,
+the terminal settings are modified for Readline's use again.
+@code{EOF} is indicated by calling @var{lhandler} with a
+@code{NULL} line.
+@end deftypefun
+
+@deftypefun void rl_callback_sigcleanup (void)
+Clean up any internal state the callback interface uses to maintain state
+between calls to rl_callback_read_char (e.g., the state of any active
+incremental searches).  This is intended to be used by applications that
+wish to perform their own signal handling; Readline's internal signal handler
+calls this when appropriate.
+@end deftypefun
+
+@deftypefun void rl_callback_handler_remove (void)
+Restore the terminal to its initial state and remove the line handler.
+You may call this function from within a callback as well as independently.
+If the @var{lhandler} installed by @code{rl_callback_handler_install}
+does not exit the program, either this function or the function referred
+to by the value of @code{rl_deprep_term_function} should be called before
+the program exits to reset the terminal settings.
+@end deftypefun
+
+@node A Readline Example
+@subsection A Readline Example
+
+Here is a function which changes lowercase characters to their uppercase
+equivalents, and uppercase characters to lowercase.  If
+this function was bound to @samp{M-c}, then typing @samp{M-c} would
+change the case of the character under point.  Typing @samp{M-1 0 M-c}
+would change the case of the following 10 characters, leaving the cursor on
+the last character changed.
+
+@example
+/* Invert the case of the COUNT following characters. */
+int
+invert_case_line (count, key)
+     int count, key;
+@{
+  register int start, end, i;
+
+  start = rl_point;
+
+  if (rl_point >= rl_end)
+    return (0);
+
+  if (count < 0)
+    @{
+      direction = -1;
+      count = -count;
+    @}
+  else
+    direction = 1;
+      
+  /* Find the end of the range to modify. */
+  end = start + (count * direction);
+
+  /* Force it to be within range. */
+  if (end > rl_end)
+    end = rl_end;
+  else if (end < 0)
+    end = 0;
+
+  if (start == end)
+    return (0);
+
+  if (start > end)
+    @{
+      int temp = start;
+      start = end;
+      end = temp;
+    @}
+
+  /* Tell readline that we are modifying the line,
+     so it will save the undo information. */
+  rl_modifying (start, end);
+
+  for (i = start; i != end; i++)
+    @{
+      if (_rl_uppercase_p (rl_line_buffer[i]))
+        rl_line_buffer[i] = _rl_to_lower (rl_line_buffer[i]);
+      else if (_rl_lowercase_p (rl_line_buffer[i]))
+        rl_line_buffer[i] = _rl_to_upper (rl_line_buffer[i]);
+    @}
+  /* Move point to on top of the last character changed. */
+  rl_point = (direction == 1) ? end - 1 : start;
+  return (0);
+@}
+@end example
+
+@node Alternate Interface Example
+@subsection Alternate Interface Example
+
+Here is a complete program that illustrates Readline's alternate interface.
+It reads lines from the terminal and displays them, providing the
+standard history and TAB completion functions.
+It understands the EOF character or "exit" to exit the program.
+
+@example
+/* Standard include files. stdio.h is required. */
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <locale.h>
+
+/* Used for select(2) */
+#include <sys/types.h>
+#include <sys/select.h>
+
+#include <signal.h>
+
+#include <stdio.h>
+
+/* Standard readline include files. */
+#include <readline/readline.h>
+#include <readline/history.h>
+
+static void cb_linehandler (char *);
+static void sighandler (int);
+
+int running;
+int sigwinch_received;
+const char *prompt = "rltest$ ";
+
+/* Handle SIGWINCH and window size changes when readline is not active and
+   reading a character. */
+static void
+sighandler (int sig)
+@{
+  sigwinch_received = 1;
+@}
+
+/* Callback function called for each line when accept-line executed, EOF
+   seen, or EOF character read.  This sets a flag and returns; it could
+   also call exit(3). */
+static void
+cb_linehandler (char *line)
+@{
+  /* Can use ^D (stty eof) or `exit' to exit. */
+  if (line == NULL || strcmp (line, "exit") == 0)
+    @{
+      if (line == 0)
+        printf ("\n");
+      printf ("exit\n");
+      /* This function needs to be called to reset the terminal settings,
+         and calling it from the line handler keeps one extra prompt from
+         being displayed. */
+      rl_callback_handler_remove ();
+
+      running = 0;
+    @}
+  else
+    @{
+      if (*line)
+        add_history (line);
+      printf ("input line: %s\n", line);
+      free (line);
+    @}
+@}
+
+int
+main (int c, char **v)
+@{
+  fd_set fds;
+  int r;
+
+  /* Set the default locale values according to environment variables. */
+  setlocale (LC_ALL, "");
+
+  /* Handle window size changes when readline is not active and reading
+     characters. */
+  signal (SIGWINCH, sighandler);
+
+  /* Install the line handler. */
+  rl_callback_handler_install (prompt, cb_linehandler);
+
+  /* Enter a simple event loop.  This waits until something is available
+     to read on readline's input stream (defaults to standard input) and
+     calls the builtin character read callback to read it.  It does not
+     have to modify the user's terminal settings. */
+  running = 1;
+  while (running)
+    @{
+      FD_ZERO (&fds);
+      FD_SET (fileno (rl_instream), &fds);    
+
+      r = select (FD_SETSIZE, &fds, NULL, NULL, NULL);
+      if (r < 0 && errno != EINTR)
+        @{
+          perror ("rltest: select");
+          rl_callback_handler_remove ();
+          break;
+        @}
+      if (sigwinch_received)
+	@{
+	  rl_resize_terminal ();
+	  sigwinch_received = 0;
+	@}
+      if (r < 0)
+	continue;     
+
+      if (FD_ISSET (fileno (rl_instream), &fds))
+        rl_callback_read_char ();
+    @}
+
+  printf ("rltest: Event loop has exited\n");
+  return 0;
+@}
+@end example
+
+@node Readline Signal Handling
+@section Readline Signal Handling
+
+Signals are asynchronous events sent to a process by the Unix kernel,
+sometimes on behalf of another process.  They are intended to indicate
+exceptional events, like a user pressing the interrupt key on his terminal,
+or a network connection being broken.  There is a class of signals that can
+be sent to the process currently reading input from the keyboard.  Since
+Readline changes the terminal attributes when it is called, it needs to
+perform special processing when such a signal is received in order to
+restore the terminal to a sane state, or provide application writers with
+functions to do so manually. 
+
+Readline contains an internal signal handler that is installed for a
+number of signals (@code{SIGINT}, @code{SIGQUIT}, @code{SIGTERM},
+@code{SIGHUP}, 
+@code{SIGALRM}, @code{SIGTSTP}, @code{SIGTTIN}, and @code{SIGTTOU}).
+When one of these signals is received, the signal handler
+will reset the terminal attributes to those that were in effect before
+@code{readline()} was called, reset the signal handling to what it was
+before @code{readline()} was called, and resend the signal to the calling
+application.
+If and when the calling application's signal handler returns, Readline
+will reinitialize the terminal and continue to accept input.
+When a @code{SIGINT} is received, the Readline signal handler performs
+some additional work, which will cause any partially-entered line to be
+aborted (see the description of @code{rl_free_line_state()} below).
+
+There is an additional Readline signal handler, for @code{SIGWINCH}, which
+the kernel sends to a process whenever the terminal's size changes (for
+example, if a user resizes an @code{xterm}).  The Readline @code{SIGWINCH}
+handler updates Readline's internal screen size information, and then calls
+any @code{SIGWINCH} signal handler the calling application has installed. 
+Readline calls the application's @code{SIGWINCH} signal handler without
+resetting the terminal to its original state.  If the application's signal
+handler does more than update its idea of the terminal size and return (for
+example, a @code{longjmp} back to a main processing loop), it @emph{must}
+call @code{rl_cleanup_after_signal()} (described below), to restore the
+terminal state.
+
+When an application is using the callback interface
+(@pxref{Alternate Interface}), Readline installs signal handlers only for
+the duration of the call to @code{rl_callback_read_char}.  Applications
+using the callback interface should be prepared to clean up Readline's
+state if they wish to handle the signal before the line handler completes
+and restores the terminal state.
+
+If an application using the callback interface wishes to have Readline
+install its signal handlers at the time the application calls
+@code{rl_callback_handler_install} and remove them only when a complete
+line of input has been read, it should set the
+@code{rl_persistent_signal_handlers} variable to a non-zero value.
+This allows an application to defer all of the handling of the signals
+Readline catches to Readline.
+Applications should use this variable with care; it can result in Readline
+catching signals and not acting on them (or allowing the application to react
+to them) until the application calls @code{rl_callback_read_char}.  This
+can result in an application becoming less responsive to keyboard signals
+like SIGINT.
+If an application does not want or need to perform any signal handling, or
+does not need to do any processing between calls to @code{rl_callback_read_char},
+setting this variable may be desirable.
+
+Readline provides two variables that allow application writers to
+control whether or not it will catch certain signals and act on them
+when they are received.  It is important that applications change the
+values of these variables only when calling @code{readline()}, not in
+a signal handler, so Readline's internal signal state is not corrupted.
+
+@deftypevar int rl_catch_signals
+If this variable is non-zero, Readline will install signal handlers for
+@code{SIGINT}, @code{SIGQUIT}, @code{SIGTERM}, @code{SIGHUP}, @code{SIGALRM},
+@code{SIGTSTP}, @code{SIGTTIN}, and @code{SIGTTOU}.
+
+The default value of @code{rl_catch_signals} is 1.
+@end deftypevar
+
+@deftypevar int rl_catch_sigwinch
+If this variable is set to a non-zero value,
+Readline will install a signal handler for @code{SIGWINCH}.
+
+The default value of @code{rl_catch_sigwinch} is 1.
+@end deftypevar
+
+@deftypevar int rl_persistent_signal_handlers
+If an application using the callback interface wishes Readline's signal
+handlers to be installed and active during the set of calls to
+@code{rl_callback_read_char} that constitutes an entire single line,
+it should set this variable to a non-zero value.
+
+The default value of @code{rl_persistent_signal_handlers} is 0.
+@end deftypevar
+
+@deftypevar int rl_change_environment
+If this variable is set to a non-zero value,
+and Readline is handling @code{SIGWINCH}, Readline will modify the
+@var{LINES} and @var{COLUMNS} environment variables upon receipt of a
+@code{SIGWINCH}
+
+The default value of @code{rl_change_environment} is 1.
+@end deftypevar
+
+If an application does not wish to have Readline catch any signals, or
+to handle signals other than those Readline catches (@code{SIGHUP},
+for example), 
+Readline provides convenience functions to do the necessary terminal
+and internal state cleanup upon receipt of a signal.
+
+@deftypefun int rl_pending_signal (void)
+Return the signal number of the most recent signal Readline received but
+has not yet handled, or 0 if there is no pending signal.
+@end deftypefun
+
+@deftypefun void rl_cleanup_after_signal (void)
+This function will reset the state of the terminal to what it was before
+@code{readline()} was called, and remove the Readline signal handlers for
+all signals, depending on the values of @code{rl_catch_signals} and
+@code{rl_catch_sigwinch}.
+@end deftypefun
+
+@deftypefun void rl_free_line_state (void)
+This will free any partial state associated with the current input line
+(undo information, any partial history entry, any partially-entered
+keyboard macro, and any partially-entered numeric argument).  This
+should be called before @code{rl_cleanup_after_signal()}.  The
+Readline signal handler for @code{SIGINT} calls this to abort the
+current input line.
+@end deftypefun
+
+@deftypefun void rl_reset_after_signal (void)
+This will reinitialize the terminal and reinstall any Readline signal
+handlers, depending on the values of @code{rl_catch_signals} and
+@code{rl_catch_sigwinch}.
+@end deftypefun
+
+If an application wants to force Readline to handle any signals that
+have arrived while it has been executing, @code{rl_check_signals()}
+will call Readline's internal signal handler if there are any pending
+signals.  This is primarily intended for those applications that use
+a custom @code{rl_getc_function} (@pxref{Readline Variables}) and wish
+to handle signals received while waiting for input.
+
+@deftypefun void rl_check_signals (void)
+If there are any pending signals, call Readline's internal signal handling
+functions to process them. @code{rl_pending_signal()} can be used independently
+to determine whether or not there are any pending signals.
+@end deftypefun
+
+If an application does not wish Readline to catch @code{SIGWINCH}, it may
+call @code{rl_resize_terminal()} or @code{rl_set_screen_size()} to force
+Readline to update its idea of the terminal size when it receives
+a @code{SIGWINCH}.
+
+@deftypefun void rl_echo_signal_char (int sig)
+If an application wishes to install its own signal handlers, but still
+have readline display characters that generate signals, calling this
+function with @var{sig} set to @code{SIGINT}, @code{SIGQUIT}, or
+@code{SIGTSTP} will display the character generating that signal.
+@end deftypefun
+
+@deftypefun void rl_resize_terminal (void)
+Update Readline's internal screen size by reading values from the kernel.
+@end deftypefun
+
+@deftypefun void rl_set_screen_size (int rows, int cols)
+Set Readline's idea of the terminal size to @var{rows} rows and
+@var{cols} columns.  If either @var{rows} or @var{columns} is less than
+or equal to 0, Readline's idea of that terminal dimension is unchanged.
+This is intended to tell Readline the physical dimensions of the terminal,
+and is used internally to calculate the maximum number of characters that
+may appear on a single line and on the screen.
+@end deftypefun
+
+If an application does not want to install a @code{SIGWINCH} handler, but
+is still interested in the screen dimensions, it may query Readline's idea
+of the screen size.
+
+@deftypefun void rl_get_screen_size (int *rows, int *cols)
+Return Readline's idea of the terminal's size in the
+variables pointed to by the arguments.
+@end deftypefun
+
+@deftypefun void rl_reset_screen_size (void)
+Cause Readline to reobtain the screen size and recalculate its dimensions.
+@end deftypefun
+
+The following functions install and remove Readline's signal handlers.
+
+@deftypefun int rl_set_signals (void)
+Install Readline's signal handler for @code{SIGINT}, @code{SIGQUIT},
+@code{SIGTERM}, @code{SIGHUP}, @code{SIGALRM}, @code{SIGTSTP}, @code{SIGTTIN},
+@code{SIGTTOU}, and @code{SIGWINCH}, depending on the values of
+@code{rl_catch_signals} and @code{rl_catch_sigwinch}.
+@end deftypefun
+
+@deftypefun int rl_clear_signals (void)
+Remove all of the Readline signal handlers installed by
+@code{rl_set_signals()}.
+@end deftypefun
+
+@node Custom Completers
+@section Custom Completers
+@cindex application-specific completion functions
+
+Typically, a program that reads commands from the user has a way of
+disambiguating commands and data.  If your program is one of these, then
+it can provide completion for commands, data, or both.
+The following sections describe how your program and Readline
+cooperate to provide this service.
+
+@menu
+* How Completing Works::	The logic used to do completion.
+* Completion Functions::	Functions provided by Readline.
+* Completion Variables::	Variables which control completion.
+* A Short Completion Example::	An example of writing completer subroutines.
+@end menu
+
+@node How Completing Works
+@subsection How Completing Works
+
+In order to complete some text, the full list of possible completions
+must be available.  That is, it is not possible to accurately
+expand a partial word without knowing all of the possible words
+which make sense in that context.  The Readline library provides
+the user interface to completion, and two of the most common
+completion functions:  filename and username.  For completing other types
+of text, you must write your own completion function.  This section
+describes exactly what such functions must do, and provides an example.
+
+There are three major functions used to perform completion:
+
+@enumerate
+@item
+The user-interface function @code{rl_complete()}.  This function is
+called with the same arguments as other bindable Readline functions:
+@var{count} and @var{invoking_key}.
+It isolates the word to be completed and calls
+@code{rl_completion_matches()} to generate a list of possible completions.
+It then either lists the possible completions, inserts the possible
+completions, or actually performs the
+completion, depending on which behavior is desired.
+
+@item
+The internal function @code{rl_completion_matches()} uses an
+application-supplied @dfn{generator} function to generate the list of
+possible matches, and then returns the array of these matches.
+The caller should place the address of its generator function in
+@code{rl_completion_entry_function}.
+
+@item
+The generator function is called repeatedly from
+@code{rl_completion_matches()}, returning a string each time.  The
+arguments to the generator function are @var{text} and @var{state}.
+@var{text} is the partial word to be completed.  @var{state} is zero the
+first time the function is called, allowing the generator to perform
+any necessary initialization, and a positive non-zero integer for
+each subsequent call.  The generator function returns
+@code{(char *)NULL} to inform @code{rl_completion_matches()} that there are
+no more possibilities left.  Usually the generator function computes the
+list of possible completions when @var{state} is zero, and returns them
+one at a time on subsequent calls.  Each string the generator function
+returns as a match must be allocated with @code{malloc()}; Readline
+frees the strings when it has finished with them.
+Such a generator function is referred to as an
+@dfn{application-specific completion function}.
+
+@end enumerate
+
+@deftypefun int rl_complete (int ignore, int invoking_key)
+Complete the word at or before point.  You have supplied the function
+that does the initial simple matching selection algorithm (see
+@code{rl_completion_matches()}).  The default is to do filename completion.
+@end deftypefun
+
+@deftypevar {rl_compentry_func_t *} rl_completion_entry_function
+This is a pointer to the generator function for
+@code{rl_completion_matches()}.
+If the value of @code{rl_completion_entry_function} is
+@code{NULL} then the default filename generator
+function, @code{rl_filename_completion_function()}, is used.
+An @dfn{application-specific completion function} is a function whose
+address is assigned to @code{rl_completion_entry_function} and whose
+return values are used to  generate possible completions.
+@end deftypevar
+
+@node Completion Functions
+@subsection Completion Functions
+
+Here is the complete list of callable completion functions present in
+Readline.
+
+@deftypefun int rl_complete_internal (int what_to_do)
+Complete the word at or before point.  @var{what_to_do} says what to do
+with the completion.  A value of @samp{?} means list the possible
+completions.  @samp{TAB} means do standard completion.  @samp{*} means
+insert all of the possible completions.  @samp{!} means to display
+all of the possible completions, if there is more than one, as well as
+performing partial completion.  @samp{@@} is similar to @samp{!}, but
+possible completions are not listed if the possible completions share
+a common prefix.
+@end deftypefun
+
+@deftypefun int rl_complete (int ignore, int invoking_key)
+Complete the word at or before point.  You have supplied the function
+that does the initial simple matching selection algorithm (see
+@code{rl_completion_matches()} and @code{rl_completion_entry_function}).
+The default is to do filename
+completion.  This calls @code{rl_complete_internal()} with an
+argument depending on @var{invoking_key}.
+@end deftypefun
+
+@deftypefun int rl_possible_completions (int count, int invoking_key)
+List the possible completions.  See description of @code{rl_complete
+()}.  This calls @code{rl_complete_internal()} with an argument of
+@samp{?}.
+@end deftypefun
+
+@deftypefun int rl_insert_completions (int count, int invoking_key)
+Insert the list of possible completions into the line, deleting the
+partially-completed word.  See description of @code{rl_complete()}.
+This calls @code{rl_complete_internal()} with an argument of @samp{*}.
+@end deftypefun
+
+@deftypefun int rl_completion_mode (rl_command_func_t *cfunc)
+Returns the appropriate value to pass to @code{rl_complete_internal()}
+depending on whether @var{cfunc} was called twice in succession and
+the values of the @code{show-all-if-ambiguous} and
+@code{show-all-if-unmodified} variables.
+Application-specific completion functions may use this function to present
+the same interface as @code{rl_complete()}.
+@end deftypefun
+
+@deftypefun {char **} rl_completion_matches (const char *text, rl_compentry_func_t *entry_func)
+Returns an array of strings which is a list of completions for
+@var{text}.  If there are no completions, returns @code{NULL}.
+The first entry in the returned array is the substitution for @var{text}.
+The remaining entries are the possible completions.  The array is
+terminated with a @code{NULL} pointer.
+
+@var{entry_func} is a function of two args, and returns a
+@code{char *}.  The first argument is @var{text}.  The second is a
+state argument; it is zero on the first call, and non-zero on subsequent
+calls.  @var{entry_func} returns a @code{NULL}  pointer to the caller
+when there are no more matches.
+@end deftypefun
+
+@deftypefun {char *} rl_filename_completion_function (const char *text, int state)
+A generator function for filename completion in the general case.
+@var{text} is a partial filename.
+The Bash source is a useful reference for writing application-specific
+completion functions (the Bash completion functions call this and other
+Readline functions).
+@end deftypefun
+
+@deftypefun {char *} rl_username_completion_function (const char *text, int state)
+A completion generator for usernames.  @var{text} contains a partial
+username preceded by a random character (usually @samp{~}).  As with all
+completion generators, @var{state} is zero on the first call and non-zero
+for subsequent calls.
+@end deftypefun
+
+@node Completion Variables
+@subsection Completion Variables
+
+@deftypevar {rl_compentry_func_t *} rl_completion_entry_function
+A pointer to the generator function for @code{rl_completion_matches()}.
+@code{NULL} means to use @code{rl_filename_completion_function()},
+the default filename completer.
+@end deftypevar
+
+@deftypevar {rl_completion_func_t *} rl_attempted_completion_function
+A pointer to an alternative function to create matches.
+The function is called with @var{text}, @var{start}, and @var{end}.
+@var{start} and @var{end} are indices in @code{rl_line_buffer} defining
+the boundaries of @var{text}, which is a character string.
+If this function exists and returns @code{NULL}, or if this variable is
+set to @code{NULL}, then @code{rl_complete()} will call the value of
+@code{rl_completion_entry_function} to generate matches, otherwise the
+array of strings returned will be used.
+If this function sets the @code{rl_attempted_completion_over}
+variable to a non-zero value, Readline will not perform its default
+completion even if this function returns no matches.
+@end deftypevar
+
+@deftypevar {rl_quote_func_t *} rl_filename_quoting_function
+A pointer to a function that will quote a filename in an
+application-specific fashion.  This is called if filename completion is being
+attempted and one of the characters in @code{rl_filename_quote_characters}
+appears in a completed filename.  The function is called with
+@var{text}, @var{match_type}, and @var{quote_pointer}.  The @var{text}
+is the filename to be quoted.  The @var{match_type} is either
+@code{SINGLE_MATCH}, if there is only one completion match, or
+@code{MULT_MATCH}.  Some functions use this to decide whether or not to
+insert a closing quote character.  The @var{quote_pointer} is a pointer
+to any opening quote character the user typed.  Some functions choose
+to reset this character.
+@end deftypevar
+
+@deftypevar {rl_dequote_func_t *} rl_filename_dequoting_function
+A pointer to a function that will remove application-specific quoting
+characters from a filename before completion is attempted, so those
+characters do not interfere with matching the text against names in
+the filesystem.  It is called with @var{text}, the text of the word
+to be dequoted, and @var{quote_char}, which is the quoting character 
+that delimits the filename (usually @samp{'} or @samp{"}).  If
+@var{quote_char} is zero, the filename was not in an embedded string.
+@end deftypevar
+
+@deftypevar {rl_linebuf_func_t *} rl_char_is_quoted_p
+A pointer to a function to call that determines whether or not a specific
+character in the line buffer is quoted, according to whatever quoting
+mechanism the program calling Readline uses.  The function is called with
+two arguments: @var{text}, the text of the line, and @var{index}, the
+index of the character in the line.  It is used to decide whether a
+character found in @code{rl_completer_word_break_characters} should be
+used to break words for the completer.
+@end deftypevar
+
+@deftypevar {rl_compignore_func_t *} rl_ignore_some_completions_function
+This function, if defined, is called by the completer when real filename
+completion is done, after all the matching names have been generated.
+It is passed a @code{NULL} terminated array of matches.
+The first element (@code{matches[0]}) is the
+maximal substring common to all matches. This function can
+re-arrange the list of matches as required, but each element deleted
+from the array must be freed.
+@end deftypevar
+
+@deftypevar {rl_icppfunc_t *} rl_directory_completion_hook
+This function, if defined, is allowed to modify the directory portion
+of filenames Readline completes.
+It could be used to expand symbolic links or shell variables in pathnames.
+It is called with the address of a string (the current directory name) as an
+argument, and may modify that string.
+If the string is replaced with a new string, the old value should be freed.
+Any modified directory name should have a trailing slash.
+The modified value will be used as part of the completion, replacing
+the directory portion of the pathname the user typed.
+At the least, even if no other expansion is performed, this function should
+remove any quote characters from the directory name, because its result will
+be passed directly to @code{opendir()}.
+
+The directory completion hook returns an integer that should be non-zero if
+the function modifies its directory argument.
+The function should not modify the directory argument if it returns 0.
+@end deftypevar
+
+@deftypevar {rl_icppfunc_t *} rl_directory_rewrite_hook;
+If non-zero, this is the address of a function to call when completing
+a directory name.  This function takes the address of the directory name
+to be modified as an argument.  Unlike @code{rl_directory_completion_hook},
+it only modifies the directory name used in @code{opendir}, not what is
+displayed when the possible completions are printed or inserted.  It is
+called before rl_directory_completion_hook.
+At the least, even if no other expansion is performed, this function should
+remove any quote characters from the directory name, because its result will
+be passed directly to @code{opendir()}.
+
+The directory rewrite hook returns an integer that should be non-zero if
+the function modifies its directory argument.
+The function should not modify the directory argument if it returns 0.
+@end deftypevar
+
+@deftypevar {rl_icppfunc_t *} rl_filename_stat_hook
+If non-zero, this is the address of a function for the completer to
+call before deciding which character to append to a completed name.
+This function modifies its filename name argument, and the modified value
+is passed to @code{stat()} to determine the file's type and characteristics.
+This function does not need to remove quote characters from the filename.
+
+The stat hook returns an integer that should be non-zero if
+the function modifies its directory argument.
+The function should not modify the directory argument if it returns 0.
+@end deftypevar
+
+@deftypevar {rl_dequote_func_t *} rl_filename_rewrite_hook
+If non-zero, this is the address of a function called when reading
+directory entries from the filesystem for completion and comparing
+them to the partial word to be completed.  The function should
+perform any necessary application or system-specific conversion on
+the filename, such as converting between character sets or converting
+from a filesystem format to a character input format.
+The function takes two arguments: @var{fname}, the filename to be converted,
+and @var{fnlen}, its length in bytes.
+It must either return its first argument (if no conversion takes place)
+or the converted filename in newly-allocated memory.  The converted
+form is used to compare against the word to be completed, and, if it
+matches, is added to the list of matches.  Readline will free the
+allocated string.
+@end deftypevar
+
+@deftypevar {rl_compdisp_func_t *} rl_completion_display_matches_hook
+If non-zero, then this is the address of a function to call when
+completing a word would normally display the list of possible matches.
+This function is called in lieu of Readline displaying the list.
+It takes three arguments:
+(@code{char **}@var{matches}, @code{int} @var{num_matches}, @code{int} @var{max_length})
+where @var{matches} is the array of matching strings,
+@var{num_matches} is the number of strings in that array, and
+@var{max_length} is the length of the longest string in that array.
+Readline provides a convenience function, @code{rl_display_match_list},
+that takes care of doing the display to Readline's output stream.
+You may call that function from this hook.
+@end deftypevar
+
+@deftypevar {const char *} rl_basic_word_break_characters
+The basic list of characters that signal a break between words for the
+completer routine.  The default value of this variable is the characters
+which break words for completion in Bash:
+@code{" \t\n\"\\'`@@$><=;|&@{("}.
+@end deftypevar
+
+@deftypevar {const char *} rl_basic_quote_characters
+A list of quote characters which can cause a word break.
+@end deftypevar
+
+@deftypevar {const char *} rl_completer_word_break_characters
+The list of characters that signal a break between words for
+@code{rl_complete_internal()}.  The default list is the value of
+@code{rl_basic_word_break_characters}.
+@end deftypevar
+
+@deftypevar {rl_cpvfunc_t *} rl_completion_word_break_hook
+If non-zero, this is the address of a function to call when Readline is
+deciding where to separate words for word completion.  It should return
+a character string like @code{rl_completer_word_break_characters} to be
+used to perform the current completion.  The function may choose to set
+@code{rl_completer_word_break_characters} itself.  If the function
+returns @code{NULL}, @code{rl_completer_word_break_characters} is used.
+@end deftypevar
+
+@deftypevar {const char *} rl_completer_quote_characters
+A list of characters which can be used to quote a substring of the line.
+Completion occurs on the entire substring, and within the substring
+@code{rl_completer_word_break_characters} are treated as any other character,
+unless they also appear within this list.
+@end deftypevar
+
+@deftypevar {const char *} rl_filename_quote_characters
+A list of characters that cause a filename to be quoted by the completer
+when they appear in a completed filename.  The default is the null string.
+@end deftypevar
+
+@deftypevar {const char *} rl_special_prefixes
+The list of characters that are word break characters, but should be
+left in @var{text} when it is passed to the completion function.
+Programs can use this to help determine what kind of completing to do.
+For instance, Bash sets this variable to "$@@" so that it can complete
+shell variables and hostnames.
+@end deftypevar
+
+@deftypevar int rl_completion_query_items
+Up to this many items will be displayed in response to a
+possible-completions call.  After that, readline asks the user if she is sure
+she wants to see them all.  The default value is 100.  A negative value 
+indicates that Readline should never ask the user.
+@end deftypevar
+
+@deftypevar {int} rl_completion_append_character
+When a single completion alternative matches at the end of the command
+line, this character is appended to the inserted completion text.  The
+default is a space character (@samp{ }).  Setting this to the null
+character (@samp{\0}) prevents anything being appended automatically.
+This can be changed in application-specific completion functions to
+provide the ``most sensible word separator character'' according to
+an application-specific command line syntax specification.
+It is set to the default before any application-specific completion function
+is called, and may only be changed within such a function.
+@end deftypevar
+
+@deftypevar int rl_completion_suppress_append
+If non-zero, @var{rl_completion_append_character} is not appended to
+matches at the end of the command line, as described above.
+It is set to 0 before any application-specific completion function
+is called, and may only be changed within such a function.
+@end deftypevar
+
+@deftypevar int rl_completion_quote_character
+When Readline is completing quoted text, as delimited by one of the
+characters in @var{rl_completer_quote_characters}, it sets this variable
+to the quoting character found.
+This is set before any application-specific completion function is called.
+@end deftypevar
+
+@deftypevar int rl_completion_suppress_quote
+If non-zero, Readline does not append a matching quote character when
+performing completion on a quoted string.
+It is set to 0 before any application-specific completion function
+is called, and may only be changed within such a function.
+@end deftypevar
+
+@deftypevar int rl_completion_found_quote
+When Readline is completing quoted text, it sets this variable
+to a non-zero value if the word being completed contains or is delimited
+by any quoting characters, including backslashes.
+This is set before any application-specific completion function is called.
+@end deftypevar
+
+@deftypevar int rl_completion_mark_symlink_dirs
+If non-zero, a slash will be appended to completed filenames that are
+symbolic links to directory names, subject to the value of the
+user-settable @var{mark-directories} variable.
+This variable exists so that application-specific completion functions
+can override the user's global preference (set via the
+@var{mark-symlinked-directories} Readline variable) if appropriate.
+This variable is set to the user's preference before any
+application-specific completion function is called, so unless that
+function modifies the value, the user's preferences are honored.
+@end deftypevar
+
+@deftypevar int rl_ignore_completion_duplicates
+If non-zero, then duplicates in the matches are removed.
+The default is 1.
+@end deftypevar
+
+@deftypevar int rl_filename_completion_desired
+Non-zero means that the results of the matches are to be treated as
+filenames.  This is @emph{always} zero when completion is attempted,
+and can only be changed
+within an application-specific completion function.  If it is set to a
+non-zero value by such a function, directory names have a slash appended
+and Readline attempts to quote completed filenames if they contain any
+characters in @code{rl_filename_quote_characters} and
+@code{rl_filename_quoting_desired} is set to a non-zero value.
+@end deftypevar
+
+@deftypevar int rl_filename_quoting_desired
+Non-zero means that the results of the matches are to be quoted using
+double quotes (or an application-specific quoting mechanism) if the
+completed filename contains any characters in
+@code{rl_filename_quote_chars}.  This is @emph{always} non-zero
+when completion is attempted, and can only be changed within an
+application-specific completion function.
+The quoting is effected via a call to the function pointed to
+by @code{rl_filename_quoting_function}.
+@end deftypevar
+
+@deftypevar int rl_attempted_completion_over
+If an application-specific completion function assigned to
+@code{rl_attempted_completion_function} sets this variable to a non-zero
+value, Readline will not perform its default filename completion even
+if the application's completion function returns no matches.
+It should be set only by an application's completion function.
+@end deftypevar
+
+@deftypevar int rl_sort_completion_matches
+If an application sets this variable to 0, Readline will not sort the
+list of completions (which implies that it cannot remove any duplicate
+completions).  The default value is 1, which means that Readline will
+sort the completions and, depending on the value of
+@code{rl_ignore_completion_duplicates}, will attempt to remove duplicate
+matches.
+@end deftypevar
+
+@deftypevar int rl_completion_type
+Set to a character describing the type of completion Readline is currently
+attempting; see the description of @code{rl_complete_internal()}
+(@pxref{Completion Functions}) for the list of characters.
+This is set to the appropriate value before any application-specific
+completion function is called, allowing such functions to present
+the same interface as @code{rl_complete()}.
+@end deftypevar
+
+@deftypevar int rl_completion_invoking_key
+Set to the final character in the key sequence that invoked one of the
+completion functions that call @code{rl_complete_internal()}.  This is
+set to the appropriate value before any application-specific completion
+function is called.
+@end deftypevar
+
+@deftypevar int rl_inhibit_completion
+If this variable is non-zero, completion is inhibited.  The completion
+character will be inserted as any other bound to @code{self-insert}.
+@end deftypevar
+
+@node A Short Completion Example
+@subsection A Short Completion Example
+
+Here is a small application demonstrating the use of the GNU Readline
+library.  It is called @code{fileman}, and the source code resides in
+@file{examples/fileman.c}.  This sample application provides
+completion of command names, line editing features, and access to the
+history list.
+
+@page
+@smallexample
+/* fileman.c -- A tiny application which demonstrates how to use the
+   GNU Readline library.  This application interactively allows users
+   to manipulate files and their modes. */
+
+#ifdef HAVE_CONFIG_H
+#  include <config.h>
+#endif
+
+#include <sys/types.h>
+#ifdef HAVE_SYS_FILE_H
+#  include <sys/file.h>
+#endif
+#include <sys/stat.h>
+
+#ifdef HAVE_UNISTD_H
+#  include <unistd.h>
+#endif
+
+#include <fcntl.h>
+#include <stdio.h>
+#include <errno.h>
+
+#if defined (HAVE_STRING_H)
+#  include <string.h>
+#else /* !HAVE_STRING_H */
+#  include <strings.h>
+#endif /* !HAVE_STRING_H */
+
+#ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+#endif
+
+#include <time.h>
+
+#include <readline/readline.h>
+#include <readline/history.h>
+
+extern char *xmalloc PARAMS((size_t));
+
+/* The names of functions that actually do the manipulation. */
+int com_list PARAMS((char *));
+int com_view PARAMS((char *));
+int com_rename PARAMS((char *));
+int com_stat PARAMS((char *));
+int com_pwd PARAMS((char *));
+int com_delete PARAMS((char *));
+int com_help PARAMS((char *));
+int com_cd PARAMS((char *));
+int com_quit PARAMS((char *));
+
+/* A structure which contains information on the commands this program
+   can understand. */
+
+typedef struct @{
+  char *name;			/* User printable name of the function. */
+  rl_icpfunc_t *func;		/* Function to call to do the job. */
+  char *doc;			/* Documentation for this function.  */
+@} COMMAND;
+
+COMMAND commands[] = @{
+  @{ "cd", com_cd, "Change to directory DIR" @},
+  @{ "delete", com_delete, "Delete FILE" @},
+  @{ "help", com_help, "Display this text" @},
+  @{ "?", com_help, "Synonym for `help'" @},
+  @{ "list", com_list, "List files in DIR" @},
+  @{ "ls", com_list, "Synonym for `list'" @},
+  @{ "pwd", com_pwd, "Print the current working directory" @},
+  @{ "quit", com_quit, "Quit using Fileman" @},
+  @{ "rename", com_rename, "Rename FILE to NEWNAME" @},
+  @{ "stat", com_stat, "Print out statistics on FILE" @},
+  @{ "view", com_view, "View the contents of FILE" @},
+  @{ (char *)NULL, (rl_icpfunc_t *)NULL, (char *)NULL @}
+@};
+
+/* Forward declarations. */
+char *stripwhite ();
+COMMAND *find_command ();
+
+/* The name of this program, as taken from argv[0]. */
+char *progname;
+
+/* When non-zero, this global means the user is done using this program. */
+int done;
+
+char *
+dupstr (s)
+     char *s;
+@{
+  char *r;
+
+  r = xmalloc (strlen (s) + 1);
+  strcpy (r, s);
+  return (r);
+@}
+
+main (argc, argv)
+     int argc;
+     char **argv;
+@{
+  char *line, *s;
+
+  progname = argv[0];
+
+  initialize_readline ();	/* Bind our completer. */
+
+  /* Loop reading and executing lines until the user quits. */
+  for ( ; done == 0; )
+    @{
+      line = readline ("FileMan: ");
+
+      if (!line)
+        break;
+
+      /* Remove leading and trailing whitespace from the line.
+         Then, if there is anything left, add it to the history list
+         and execute it. */
+      s = stripwhite (line);
+
+      if (*s)
+        @{
+          add_history (s);
+          execute_line (s);
+        @}
+
+      free (line);
+    @}
+  exit (0);
+@}
+
+/* Execute a command line. */
+int
+execute_line (line)
+     char *line;
+@{
+  register int i;
+  COMMAND *command;
+  char *word;
+
+  /* Isolate the command word. */
+  i = 0;
+  while (line[i] && whitespace (line[i]))
+    i++;
+  word = line + i;
+
+  while (line[i] && !whitespace (line[i]))
+    i++;
+
+  if (line[i])
+    line[i++] = '\0';
+
+  command = find_command (word);
+
+  if (!command)
+    @{
+      fprintf (stderr, "%s: No such command for FileMan.\n", word);
+      return (-1);
+    @}
+
+  /* Get argument to command, if any. */
+  while (whitespace (line[i]))
+    i++;
+
+  word = line + i;
+
+  /* Call the function. */
+  return ((*(command->func)) (word));
+@}
+
+/* Look up NAME as the name of a command, and return a pointer to that
+   command.  Return a NULL pointer if NAME isn't a command name. */
+COMMAND *
+find_command (name)
+     char *name;
+@{
+  register int i;
+
+  for (i = 0; commands[i].name; i++)
+    if (strcmp (name, commands[i].name) == 0)
+      return (&commands[i]);
+
+  return ((COMMAND *)NULL);
+@}
+
+/* Strip whitespace from the start and end of STRING.  Return a pointer
+   into STRING. */
+char *
+stripwhite (string)
+     char *string;
+@{
+  register char *s, *t;
+
+  for (s = string; whitespace (*s); s++)
+    ;
+    
+  if (*s == 0)
+    return (s);
+
+  t = s + strlen (s) - 1;
+  while (t > s && whitespace (*t))
+    t--;
+  *++t = '\0';
+
+  return s;
+@}
+
+/* **************************************************************** */
+/*                                                                  */
+/*                  Interface to Readline Completion                */
+/*                                                                  */
+/* **************************************************************** */
+
+char *command_generator PARAMS((const char *, int));
+char **fileman_completion PARAMS((const char *, int, int));
+
+/* Tell the GNU Readline library how to complete.  We want to try to complete
+   on command names if this is the first word in the line, or on filenames
+   if not. */
+initialize_readline ()
+@{
+  /* Allow conditional parsing of the ~/.inputrc file. */
+  rl_readline_name = "FileMan";
+
+  /* Tell the completer that we want a crack first. */
+  rl_attempted_completion_function = fileman_completion;
+@}
+
+/* Attempt to complete on the contents of TEXT.  START and END bound the
+   region of rl_line_buffer that contains the word to complete.  TEXT is
+   the word to complete.  We can use the entire contents of rl_line_buffer
+   in case we want to do some simple parsing.  Return the array of matches,
+   or NULL if there aren't any. */
+char **
+fileman_completion (text, start, end)
+     const char *text;
+     int start, end;
+@{
+  char **matches;
+
+  matches = (char **)NULL;
+
+  /* If this word is at the start of the line, then it is a command
+     to complete.  Otherwise it is the name of a file in the current
+     directory. */
+  if (start == 0)
+    matches = rl_completion_matches (text, command_generator);
+
+  return (matches);
+@}
+
+/* Generator function for command completion.  STATE lets us know whether
+   to start from scratch; without any state (i.e. STATE == 0), then we
+   start at the top of the list. */
+char *
+command_generator (text, state)
+     const char *text;
+     int state;
+@{
+  static int list_index, len;
+  char *name;
+
+  /* If this is a new word to complete, initialize now.  This includes
+     saving the length of TEXT for efficiency, and initializing the index
+     variable to 0. */
+  if (!state)
+    @{
+      list_index = 0;
+      len = strlen (text);
+    @}
+
+  /* Return the next name which partially matches from the command list. */
+  while (name = commands[list_index].name)
+    @{
+      list_index++;
+
+      if (strncmp (name, text, len) == 0)
+        return (dupstr(name));
+    @}
+
+  /* If no names matched, then return NULL. */
+  return ((char *)NULL);
+@}
+
+/* **************************************************************** */
+/*                                                                  */
+/*                       FileMan Commands                           */
+/*                                                                  */
+/* **************************************************************** */
+
+/* String to pass to system ().  This is for the LIST, VIEW and RENAME
+   commands. */
+static char syscom[1024];
+
+/* List the file(s) named in arg. */
+com_list (arg)
+     char *arg;
+@{
+  if (!arg)
+    arg = "";
+
+  sprintf (syscom, "ls -FClg %s", arg);
+  return (system (syscom));
+@}
+
+com_view (arg)
+     char *arg;
+@{
+  if (!valid_argument ("view", arg))
+    return 1;
+
+#if defined (__MSDOS__)
+  /* more.com doesn't grok slashes in pathnames */
+  sprintf (syscom, "less %s", arg);
+#else
+  sprintf (syscom, "more %s", arg);
+#endif
+  return (system (syscom));
+@}
+
+com_rename (arg)
+     char *arg;
+@{
+  too_dangerous ("rename");
+  return (1);
+@}
+
+com_stat (arg)
+     char *arg;
+@{
+  struct stat finfo;
+
+  if (!valid_argument ("stat", arg))
+    return (1);
+
+  if (stat (arg, &finfo) == -1)
+    @{
+      perror (arg);
+      return (1);
+    @}
+
+  printf ("Statistics for `%s':\n", arg);
+
+  printf ("%s has %d link%s, and is %d byte%s in length.\n",
+	  arg,
+          finfo.st_nlink,
+          (finfo.st_nlink == 1) ? "" : "s",
+          finfo.st_size,
+          (finfo.st_size == 1) ? "" : "s");
+  printf ("Inode Last Change at: %s", ctime (&finfo.st_ctime));
+  printf ("      Last access at: %s", ctime (&finfo.st_atime));
+  printf ("    Last modified at: %s", ctime (&finfo.st_mtime));
+  return (0);
+@}
+
+com_delete (arg)
+     char *arg;
+@{
+  too_dangerous ("delete");
+  return (1);
+@}
+
+/* Print out help for ARG, or for all of the commands if ARG is
+   not present. */
+com_help (arg)
+     char *arg;
+@{
+  register int i;
+  int printed = 0;
+
+  for (i = 0; commands[i].name; i++)
+    @{
+      if (!*arg || (strcmp (arg, commands[i].name) == 0))
+        @{
+          printf ("%s\t\t%s.\n", commands[i].name, commands[i].doc);
+          printed++;
+        @}
+    @}
+
+  if (!printed)
+    @{
+      printf ("No commands match `%s'.  Possibilities are:\n", arg);
+
+      for (i = 0; commands[i].name; i++)
+        @{
+          /* Print in six columns. */
+          if (printed == 6)
+            @{
+              printed = 0;
+              printf ("\n");
+            @}
+
+          printf ("%s\t", commands[i].name);
+          printed++;
+        @}
+
+      if (printed)
+        printf ("\n");
+    @}
+  return (0);
+@}
+
+/* Change to the directory ARG. */
+com_cd (arg)
+     char *arg;
+@{
+  if (chdir (arg) == -1)
+    @{
+      perror (arg);
+      return 1;
+    @}
+
+  com_pwd ("");
+  return (0);
+@}
+
+/* Print out the current working directory. */
+com_pwd (ignore)
+     char *ignore;
+@{
+  char dir[1024], *s;
+
+  s = getcwd (dir, sizeof(dir) - 1);
+  if (s == 0)
+    @{
+      printf ("Error getting pwd: %s\n", dir);
+      return 1;
+    @}
+
+  printf ("Current directory is %s\n", dir);
+  return 0;
+@}
+
+/* The user wishes to quit using this program.  Just set DONE non-zero. */
+com_quit (arg)
+     char *arg;
+@{
+  done = 1;
+  return (0);
+@}
+
+/* Function which tells you that you can't do this. */
+too_dangerous (caller)
+     char *caller;
+@{
+  fprintf (stderr,
+           "%s: Too dangerous for me to distribute.  Write it yourself.\n",
+           caller);
+@}
+
+/* Return non-zero if ARG is a valid argument for CALLER, else print
+   an error message and return zero. */
+int
+valid_argument (caller, arg)
+     char *caller, *arg;
+@{
+  if (!arg || !*arg)
+    @{
+      fprintf (stderr, "%s: Argument required.\n", caller);
+      return (0);
+    @}
+
+  return (1);
+@}
+@end smallexample
diff --git a/lib/readline/doc/rluser.texi b/lib/readline/doc/rluser.texi
new file mode 100644
index 0000000..26b0ff0
--- /dev/null
+++ b/lib/readline/doc/rluser.texi
@@ -0,0 +1,2422 @@
+@comment %**start of header (This is for running Texinfo on a region.)
+@setfilename rluser.info
+@comment %**end of header (This is for running Texinfo on a region.)
+
+@ignore
+This file documents the end user interface to the GNU command line
+editing features.  It is to be an appendix to manuals for programs which
+use these features.  There is a document entitled "readline.texinfo"
+which contains both end-user and programmer documentation for the
+GNU Readline Library.
+
+Copyright (C) 1988--2020 Free Software Foundation, Inc.
+
+Authored by Brian Fox and Chet Ramey.
+
+Permission is granted to process this file through Tex and print the
+results, provided the printed document carries copying permission notice
+identical to this one except for the removal of this paragraph (this
+paragraph not being relevant to the printed manual).
+
+Permission is granted to make and distribute verbatim copies of this manual
+provided the copyright notice and this permission notice are preserved on
+all copies.
+
+Permission is granted to copy and distribute modified versions of this
+manual under the conditions for verbatim copying, provided also that the
+GNU Copyright statement is available to the distributee, and provided that
+the entire resulting derived work is distributed under the terms of a
+permission notice identical to this one.
+
+Permission is granted to copy and distribute translations of this manual
+into another language, under the above conditions for modified versions.
+@end ignore
+
+@comment If you are including this manual as an appendix, then set the
+@comment variable readline-appendix.
+
+@ifclear BashFeatures
+@defcodeindex bt
+@end ifclear
+
+@node Command Line Editing
+@chapter Command Line Editing
+
+This chapter describes the basic features of the @sc{gnu}
+command line editing interface.
+@ifset BashFeatures
+Command line editing is provided by the Readline library, which is
+used by several different programs, including Bash.
+Command line editing is enabled by default when using an interactive shell,
+unless the @option{--noediting} option is supplied at shell invocation.
+Line editing is also used when using the @option{-e} option to the
+@code{read} builtin command (@pxref{Bash Builtins}).
+By default, the line editing commands are similar to those of Emacs.
+A vi-style line editing interface is also available.
+Line editing can be enabled at any time using the @option{-o emacs} or
+@option{-o vi} options to the @code{set} builtin command
+(@pxref{The Set Builtin}), or disabled using the @option{+o emacs} or 
+@option{+o vi} options to @code{set}.
+@end ifset
+
+@menu
+* Introduction and Notation::	Notation used in this text.
+* Readline Interaction::	The minimum set of commands for editing a line.
+* Readline Init File::		Customizing Readline from a user's view.
+* Bindable Readline Commands::	A description of most of the Readline commands
+				available for binding
+* Readline vi Mode::		A short description of how to make Readline
+				behave like the vi editor.
+@ifset BashFeatures
+* Programmable Completion::	How to specify the possible completions for
+				a specific command.
+* Programmable Completion Builtins::	Builtin commands to specify how to
+				complete arguments for a particular command.
+* A Programmable Completion Example::	An example shell function for
+				generating possible completions.
+@end ifset
+@end menu
+
+@node Introduction and Notation
+@section Introduction to Line Editing
+
+The following paragraphs describe the notation used to represent
+keystrokes.
+
+The text @kbd{C-k} is read as `Control-K' and describes the character
+produced when the @key{k} key is pressed while the Control key
+is depressed.
+
+The text @kbd{M-k} is read as `Meta-K' and describes the character
+produced when the Meta key (if you have one) is depressed, and the @key{k}
+key is pressed.
+The Meta key is labeled @key{ALT} on many keyboards.
+On keyboards with two keys labeled @key{ALT} (usually to either side of
+the space bar), the @key{ALT} on the left side is generally set to
+work as a Meta key.
+The @key{ALT} key on the right may also be configured to work as a
+Meta key or may be configured as some other modifier, such as a
+Compose key for typing accented characters.
+
+If you do not have a Meta or @key{ALT} key, or another key working as
+a Meta key, the identical keystroke can be generated by typing @key{ESC}
+@emph{first}, and then typing @key{k}.
+Either process is known as @dfn{metafying} the @key{k} key.
+
+The text @kbd{M-C-k} is read as `Meta-Control-k' and describes the
+character produced by @dfn{metafying} @kbd{C-k}.
+
+In addition, several keys have their own names.  Specifically,
+@key{DEL}, @key{ESC}, @key{LFD}, @key{SPC}, @key{RET}, and @key{TAB} all
+stand for themselves when seen in this text, or in an init file
+(@pxref{Readline Init File}).
+If your keyboard lacks a @key{LFD} key, typing @key{C-j} will
+produce the desired character.
+The @key{RET} key may be labeled @key{Return} or @key{Enter} on
+some keyboards.
+
+@node Readline Interaction
+@section Readline Interaction
+@cindex interaction, readline
+
+Often during an interactive session you type in a long line of text,
+only to notice that the first word on the line is misspelled.  The
+Readline library gives you a set of commands for manipulating the text
+as you type it in, allowing you to just fix your typo, and not forcing
+you to retype the majority of the line.  Using these editing commands,
+you move the cursor to the place that needs correction, and delete or
+insert the text of the corrections.  Then, when you are satisfied with
+the line, you simply press @key{RET}.  You do not have to be at the
+end of the line to press @key{RET}; the entire line is accepted
+regardless of the location of the cursor within the line.
+
+@menu
+* Readline Bare Essentials::	The least you need to know about Readline.
+* Readline Movement Commands::	Moving about the input line.
+* Readline Killing Commands::	How to delete text, and how to get it back!
+* Readline Arguments::		Giving numeric arguments to commands.
+* Searching::			Searching through previous lines.
+@end menu
+
+@node Readline Bare Essentials
+@subsection Readline Bare Essentials
+@cindex notation, readline
+@cindex command editing
+@cindex editing command lines
+
+In order to enter characters into the line, simply type them.  The typed
+character appears where the cursor was, and then the cursor moves one
+space to the right.  If you mistype a character, you can use your
+erase character to back up and delete the mistyped character.
+
+Sometimes you may mistype a character, and
+not notice the error until you have typed several other characters.  In
+that case, you can type @kbd{C-b} to move the cursor to the left, and then
+correct your mistake.  Afterwards, you can move the cursor to the right
+with @kbd{C-f}.
+
+When you add text in the middle of a line, you will notice that characters
+to the right of the cursor are `pushed over' to make room for the text
+that you have inserted.  Likewise, when you delete text behind the cursor,
+characters to the right of the cursor are `pulled back' to fill in the
+blank space created by the removal of the text.  A list of the bare
+essentials for editing the text of an input line follows.
+
+@table @asis
+@item @kbd{C-b}
+Move back one character.
+@item @kbd{C-f}
+Move forward one character.
+@item @key{DEL} or @key{Backspace}
+Delete the character to the left of the cursor.
+@item @kbd{C-d}
+Delete the character underneath the cursor.
+@item @w{Printing characters}
+Insert the character into the line at the cursor.
+@item @kbd{C-_} or @kbd{C-x C-u}
+Undo the last editing command.  You can undo all the way back to an
+empty line.
+@end table
+
+@noindent
+(Depending on your configuration, the @key{Backspace} key be set to
+delete the character to the left of the cursor and the @key{DEL} key set
+to delete the character underneath the cursor, like @kbd{C-d}, rather
+than the character to the left of the cursor.)
+
+@node Readline Movement Commands
+@subsection Readline Movement Commands
+
+
+The above table describes the most basic keystrokes that you need
+in order to do editing of the input line.  For your convenience, many
+other commands have been added in addition to @kbd{C-b}, @kbd{C-f},
+@kbd{C-d}, and @key{DEL}.  Here are some commands for moving more rapidly
+about the line.
+
+@table @kbd
+@item C-a
+Move to the start of the line.
+@item C-e
+Move to the end of the line.
+@item M-f
+Move forward a word, where a word is composed of letters and digits.
+@item M-b
+Move backward a word.
+@item C-l
+Clear the screen, reprinting the current line at the top.
+@end table
+
+Notice how @kbd{C-f} moves forward a character, while @kbd{M-f} moves
+forward a word.  It is a loose convention that control keystrokes
+operate on characters while meta keystrokes operate on words.
+
+@node Readline Killing Commands
+@subsection Readline Killing Commands
+
+@cindex killing text
+@cindex yanking text
+
+@dfn{Killing} text means to delete the text from the line, but to save
+it away for later use, usually by @dfn{yanking} (re-inserting)
+it back into the line.
+(`Cut' and `paste' are more recent jargon for `kill' and `yank'.)
+
+If the description for a command says that it `kills' text, then you can
+be sure that you can get the text back in a different (or the same)
+place later.
+
+When you use a kill command, the text is saved in a @dfn{kill-ring}.
+Any number of consecutive kills save all of the killed text together, so
+that when you yank it back, you get it all.  The kill
+ring is not line specific; the text that you killed on a previously
+typed line is available to be yanked back later, when you are typing
+another line.
+@cindex kill ring
+
+Here is the list of commands for killing text.
+
+@table @kbd
+@item C-k
+Kill the text from the current cursor position to the end of the line.
+
+@item M-d
+Kill from the cursor to the end of the current word, or, if between
+words, to the end of the next word.
+Word boundaries are the same as those used by @kbd{M-f}.
+
+@item M-@key{DEL}
+Kill from the cursor the start of the current word, or, if between
+words, to the start of the previous word.
+Word boundaries are the same as those used by @kbd{M-b}.
+
+@item C-w
+Kill from the cursor to the previous whitespace.  This is different than
+@kbd{M-@key{DEL}} because the word boundaries differ.
+
+@end table
+
+Here is how to @dfn{yank} the text back into the line.  Yanking
+means to copy the most-recently-killed text from the kill buffer.
+
+@table @kbd
+@item C-y
+Yank the most recently killed text back into the buffer at the cursor.
+
+@item M-y
+Rotate the kill-ring, and yank the new top.  You can only do this if
+the prior command is @kbd{C-y} or @kbd{M-y}.
+@end table
+
+@node Readline Arguments
+@subsection Readline Arguments
+
+You can pass numeric arguments to Readline commands.  Sometimes the
+argument acts as a repeat count, other times it is the @i{sign} of the
+argument that is significant.  If you pass a negative argument to a
+command which normally acts in a forward direction, that command will
+act in a backward direction.  For example, to kill text back to the
+start of the line, you might type @samp{M-- C-k}.
+
+The general way to pass numeric arguments to a command is to type meta
+digits before the command.  If the first `digit' typed is a minus
+sign (@samp{-}), then the sign of the argument will be negative.  Once
+you have typed one meta digit to get the argument started, you can type
+the remainder of the digits, and then the command.  For example, to give
+the @kbd{C-d} command an argument of 10, you could type @samp{M-1 0 C-d},
+which will delete the next ten characters on the input line.
+
+@node Searching
+@subsection Searching for Commands in the History
+
+Readline provides commands for searching through the command history
+@ifset BashFeatures
+(@pxref{Bash History Facilities})
+@end ifset
+for lines containing a specified string.
+There are two search modes:  @dfn{incremental} and @dfn{non-incremental}.
+
+Incremental searches begin before the user has finished typing the
+search string.
+As each character of the search string is typed, Readline displays
+the next entry from the history matching the string typed so far.
+An incremental search requires only as many characters as needed to
+find the desired history entry.
+To search backward in the history for a particular string, type
+@kbd{C-r}.  Typing @kbd{C-s} searches forward through the history.
+The characters present in the value of the @code{isearch-terminators} variable
+are used to terminate an incremental search.
+If that variable has not been assigned a value, the @key{ESC} and
+@kbd{C-J} characters will terminate an incremental search.
+@kbd{C-g} will abort an incremental search and restore the original line.
+When the search is terminated, the history entry containing the
+search string becomes the current line.
+
+To find other matching entries in the history list, type @kbd{C-r} or
+@kbd{C-s} as appropriate.
+This will search backward or forward in the history for the next
+entry matching the search string typed so far.
+Any other key sequence bound to a Readline command will terminate
+the search and execute that command.
+For instance, a @key{RET} will terminate the search and accept
+the line, thereby executing the command from the history list.
+A movement command will terminate the search, make the last line found
+the current line, and begin editing.
+
+Readline remembers the last incremental search string.  If two
+@kbd{C-r}s are typed without any intervening characters defining a new
+search string, any remembered search string is used.
+
+Non-incremental searches read the entire search string before starting
+to search for matching history lines.  The search string may be
+typed by the user or be part of the contents of the current line.
+
+@node Readline Init File
+@section Readline Init File
+@cindex initialization file, readline
+
+Although the Readline library comes with a set of Emacs-like
+keybindings installed by default, it is possible to use a different set
+of keybindings.
+Any user can customize programs that use Readline by putting
+commands in an @dfn{inputrc} file, conventionally in his home directory.
+The name of this
+@ifset BashFeatures
+file is taken from the value of the shell variable @env{INPUTRC}.  If
+@end ifset
+@ifclear BashFeatures
+file is taken from the value of the environment variable @env{INPUTRC}.  If
+@end ifclear
+that variable is unset, the default is @file{~/.inputrc}.  If that
+file does not exist or cannot be read, the ultimate default is
+@file{/etc/inputrc}.
+@ifset BashFeatures
+The @w{@code{bind}} builtin command can also be used to set Readline
+keybindings and variables.
+@xref{Bash Builtins}.
+@end ifset
+
+When a program which uses the Readline library starts up, the
+init file is read, and the key bindings are set.
+
+In addition, the @code{C-x C-r} command re-reads this init file, thus
+incorporating any changes that you might have made to it.
+
+@menu
+* Readline Init File Syntax::	Syntax for the commands in the inputrc file.
+
+* Conditional Init Constructs::	Conditional key bindings in the inputrc file.
+
+* Sample Init File::		An example inputrc file.
+@end menu
+
+@node Readline Init File Syntax
+@subsection Readline Init File Syntax
+
+There are only a few basic constructs allowed in the
+Readline init file.  Blank lines are ignored.
+Lines beginning with a @samp{#} are comments.
+Lines beginning with a @samp{$} indicate conditional
+constructs (@pxref{Conditional Init Constructs}).  Other lines
+denote variable settings and key bindings.
+
+@table @asis
+@item Variable Settings
+You can modify the run-time behavior of Readline by
+altering the values of variables in Readline
+using the @code{set} command within the init file.
+The syntax is simple:
+
+@example
+set @var{variable} @var{value}
+@end example
+
+@noindent
+Here, for example, is how to
+change from the default Emacs-like key binding to use
+@code{vi} line editing commands:
+
+@example
+set editing-mode vi
+@end example
+
+Variable names and values, where appropriate, are recognized without regard
+to case.  Unrecognized variable names are ignored.
+
+Boolean variables (those that can be set to on or off) are set to on if
+the value is null or empty, @var{on} (case-insensitive), or 1.  Any other
+value results in the variable being set to off.
+
+@ifset BashFeatures
+The @w{@code{bind -V}} command lists the current Readline variable names
+and values.  @xref{Bash Builtins}.
+@end ifset
+
+A great deal of run-time behavior is changeable with the following
+variables.
+
+@cindex variables, readline
+@table @code
+
+@item bell-style
+@vindex bell-style
+Controls what happens when Readline wants to ring the terminal bell.
+If set to @samp{none}, Readline never rings the bell.  If set to
+@samp{visible}, Readline uses a visible bell if one is available.
+If set to @samp{audible} (the default), Readline attempts to ring
+the terminal's bell.
+
+@item bind-tty-special-chars
+@vindex bind-tty-special-chars
+If set to @samp{on} (the default), Readline attempts to bind the control
+characters   treated specially by the kernel's terminal driver to their
+Readline equivalents.
+
+@item blink-matching-paren
+@vindex blink-matching-paren
+If set to @samp{on}, Readline attempts to briefly move the cursor to an
+opening parenthesis when a closing parenthesis is inserted.  The default
+is @samp{off}.
+
+@item colored-completion-prefix
+@vindex colored-completion-prefix
+If set to @samp{on}, when listing completions, Readline displays the
+common prefix of the set of possible completions using a different color.
+The color definitions are taken from the value of the @env{LS_COLORS}
+environment variable.
+The default is @samp{off}.
+
+@item colored-stats
+@vindex colored-stats
+If set to @samp{on}, Readline displays possible completions using different
+colors to indicate their file type.
+The color definitions are taken from the value of the @env{LS_COLORS}
+environment variable.
+The default is @samp{off}.
+
+@item comment-begin
+@vindex comment-begin
+The string to insert at the beginning of the line when the
+@code{insert-comment} command is executed.  The default value
+is @code{"#"}.
+
+@item completion-display-width
+@vindex completion-display-width
+The number of screen columns used to display possible matches
+when performing completion.
+The value is ignored if it is less than 0 or greater than the terminal
+screen width.
+A value of 0 will cause matches to be displayed one per line.
+The default value is -1.
+
+@item completion-ignore-case
+@vindex completion-ignore-case
+If set to @samp{on}, Readline performs filename matching and completion
+in a case-insensitive fashion.
+The default value is @samp{off}.
+
+@item completion-map-case
+@vindex completion-map-case
+If set to @samp{on}, and @var{completion-ignore-case} is enabled, Readline
+treats hyphens (@samp{-}) and underscores (@samp{_}) as equivalent when
+performing case-insensitive filename matching and completion.
+The default value is @samp{off}.
+
+@item completion-prefix-display-length
+@vindex completion-prefix-display-length
+The length in characters of the common prefix of a list of possible
+completions that is displayed without modification.  When set to a
+value greater than zero, common prefixes longer than this value are
+replaced with an ellipsis when displaying possible completions.
+
+@item completion-query-items
+@vindex completion-query-items
+The number of possible completions that determines when the user is
+asked whether the list of possibilities should be displayed.
+If the number of possible completions is greater than or equal to this value,
+Readline will ask whether or not the user wishes to view them;
+otherwise, they are simply listed.
+This variable must be set to an integer value greater than or equal to 0.
+A negative value means Readline should never ask.
+The default limit is @code{100}.
+
+@item convert-meta
+@vindex convert-meta
+If set to @samp{on}, Readline will convert characters with the
+eighth bit set to an @sc{ascii} key sequence by stripping the eighth
+bit and prefixing an @key{ESC} character, converting them to a
+meta-prefixed key sequence.  The default value is @samp{on}, but
+will be set to @samp{off} if the locale is one that contains
+eight-bit characters.
+
+@item disable-completion
+@vindex disable-completion
+If set to @samp{On}, Readline will inhibit word completion.
+Completion  characters will be inserted into the line as if they had
+been mapped to @code{self-insert}.  The default is @samp{off}.
+
+@item echo-control-characters
+@vindex echo-control-characters
+When set to @samp{on}, on operating systems that indicate they support it,
+readline echoes a character corresponding to a signal generated from the
+keyboard.  The default is @samp{on}.
+
+@item editing-mode
+@vindex editing-mode
+The @code{editing-mode} variable controls which default set of
+key bindings is used.  By default, Readline starts up in Emacs editing
+mode, where the keystrokes are most similar to Emacs.  This variable can be
+set to either @samp{emacs} or @samp{vi}.
+
+@item emacs-mode-string
+@vindex emacs-mode-string
+If the @var{show-mode-in-prompt} variable is enabled,
+this string is displayed immediately before the last line of the primary
+prompt when emacs editing mode is active.  The value is expanded like a
+key binding, so the standard set of meta- and control prefixes and
+backslash escape sequences is available.
+Use the @samp{\1} and @samp{\2} escapes to begin and end sequences of
+non-printing characters, which can be used to embed a terminal control
+sequence into the mode string.
+The default is @samp{@@}.
+
+@item enable-bracketed-paste
+@vindex enable-bracketed-paste
+When set to @samp{On}, Readline will configure the terminal in a way
+that will enable it to insert each paste into the editing buffer as a
+single string of characters, instead of treating each character as if
+it had been read from the keyboard.  This can prevent pasted characters
+from being interpreted as editing commands.  The default is @samp{On}.
+
+@item enable-keypad
+@vindex enable-keypad
+When set to @samp{on}, Readline will try to enable the application
+keypad when it is called.  Some systems need this to enable the
+arrow keys.  The default is @samp{off}.
+
+@item enable-meta-key
+When set to @samp{on}, Readline will try to enable any meta modifier
+key the terminal claims to support when it is called.  On many terminals,
+the meta key is used to send eight-bit characters.
+The default is @samp{on}.
+
+@item expand-tilde
+@vindex expand-tilde
+If set to @samp{on}, tilde expansion is performed when Readline
+attempts word completion.  The default is @samp{off}.
+
+@item history-preserve-point
+@vindex history-preserve-point
+If set to @samp{on}, the history code attempts to place the point (the
+current cursor position) at the
+same location on each history line retrieved with @code{previous-history}
+or @code{next-history}.  The default is @samp{off}.
+
+@item history-size
+@vindex history-size
+Set the maximum number of history entries saved in the history list.
+If set to zero, any existing history entries are deleted and no new entries
+are saved.
+If set to a value less than zero, the number of history entries is not
+limited.
+By default, the number of history entries is not limited.
+If an attempt is made to set @var{history-size} to a non-numeric value,
+the maximum number of history entries will be set to 500.
+
+@item horizontal-scroll-mode
+@vindex horizontal-scroll-mode
+This variable can be set to either @samp{on} or @samp{off}.  Setting it
+to @samp{on} means that the text of the lines being edited will scroll
+horizontally on a single screen line when they are longer than the width
+of the screen, instead of wrapping onto a new screen line.
+This variable is automatically set to @samp{on} for terminals of height 1.
+By default, this variable is set to @samp{off}.
+
+@item input-meta
+@vindex input-meta
+@vindex meta-flag
+If set to @samp{on}, Readline will enable eight-bit input (it
+will not clear the eighth bit in the characters it reads),
+regardless of what the terminal claims it can support.  The
+default value is @samp{off}, but Readline will set it to @samp{on} if the 
+locale contains eight-bit characters.
+The name @code{meta-flag} is a synonym for this variable.
+
+@item isearch-terminators
+@vindex isearch-terminators
+The string of characters that should terminate an incremental search without
+subsequently executing the character as a command (@pxref{Searching}).
+If this variable has not been given a value, the characters @key{ESC} and
+@kbd{C-J} will terminate an incremental search.
+
+@item keymap
+@vindex keymap
+Sets Readline's idea of the current keymap for key binding commands.
+Built-in @code{keymap} names are
+@code{emacs},
+@code{emacs-standard},
+@code{emacs-meta},
+@code{emacs-ctlx},
+@code{vi},
+@code{vi-move},
+@code{vi-command}, and
+@code{vi-insert}.
+@code{vi} is equivalent to @code{vi-command} (@code{vi-move} is also a
+synonym); @code{emacs} is equivalent to @code{emacs-standard}.
+Applications may add additional names.
+The default value is @code{emacs}.
+The value of the @code{editing-mode} variable also affects the
+default keymap.
+
+@item keyseq-timeout
+Specifies the duration Readline will wait for a character when reading an
+ambiguous key sequence (one that can form a complete key sequence using
+the input read so far, or can take additional input to complete a longer
+key sequence).
+If no input is received within the timeout, Readline will use the shorter
+but complete key sequence.
+Readline uses this value to determine whether or not input is
+available on the current input source (@code{rl_instream} by default).
+The value is specified in milliseconds, so a value of 1000 means that
+Readline will wait one second for additional input.
+If this variable is set to a value less than or equal to zero, or to a
+non-numeric value, Readline will wait until another key is pressed to
+decide which key sequence to complete.
+The default value is @code{500}.
+
+@item mark-directories
+If set to @samp{on}, completed directory names have a slash
+appended.  The default is @samp{on}.
+
+@item mark-modified-lines
+@vindex mark-modified-lines
+This variable, when set to @samp{on}, causes Readline to display an
+asterisk (@samp{*}) at the start of history lines which have been modified.
+This variable is @samp{off} by default.
+
+@item mark-symlinked-directories
+@vindex mark-symlinked-directories
+If set to @samp{on}, completed names which are symbolic links
+to directories have a slash appended (subject to the value of
+@code{mark-directories}).
+The default is @samp{off}.
+
+@item match-hidden-files
+@vindex match-hidden-files
+This variable, when set to @samp{on}, causes Readline to match files whose
+names begin with a @samp{.} (hidden files) when performing filename
+completion.
+If set to @samp{off}, the leading @samp{.} must be
+supplied by the user in the filename to be completed.
+This variable is @samp{on} by default.
+
+@item menu-complete-display-prefix
+@vindex menu-complete-display-prefix
+If set to @samp{on}, menu completion displays the common prefix of the
+list of possible completions (which may be empty) before cycling through
+the list.  The default is @samp{off}.
+
+@item output-meta
+@vindex output-meta
+If set to @samp{on}, Readline will display characters with the
+eighth bit set directly rather than as a meta-prefixed escape
+sequence.
+The default is @samp{off}, but Readline will set it to @samp{on} if the
+locale contains eight-bit characters.
+
+@item page-completions
+@vindex page-completions
+If set to @samp{on}, Readline uses an internal @code{more}-like pager
+to display a screenful of possible completions at a time.
+This variable is @samp{on} by default.
+
+@item print-completions-horizontally
+If set to @samp{on}, Readline will display completions with matches
+sorted horizontally in alphabetical order, rather than down the screen.
+The default is @samp{off}.
+
+@item revert-all-at-newline
+@vindex revert-all-at-newline
+If set to @samp{on}, Readline will undo all changes to history lines
+before returning when @code{accept-line} is executed.  By default,
+history lines may be modified and retain individual undo lists across
+calls to @code{readline}.  The default is @samp{off}.
+
+@item show-all-if-ambiguous
+@vindex show-all-if-ambiguous
+This alters the default behavior of the completion functions.  If
+set to @samp{on}, 
+words which have more than one possible completion cause the
+matches to be listed immediately instead of ringing the bell.
+The default value is @samp{off}.
+
+@item show-all-if-unmodified
+@vindex show-all-if-unmodified
+This alters the default behavior of the completion functions in
+a fashion similar to @var{show-all-if-ambiguous}.
+If set to @samp{on}, 
+words which have more than one possible completion without any
+possible partial completion (the possible completions don't share
+a common prefix) cause the matches to be listed immediately instead
+of ringing the bell.
+The default value is @samp{off}.
+
+@item show-mode-in-prompt
+@vindex show-mode-in-prompt
+If set to @samp{on}, add a string to the beginning of the prompt
+indicating the editing mode: emacs, vi command, or vi insertion.
+The mode strings are user-settable (e.g., @var{emacs-mode-string}).
+The default value is @samp{off}.
+
+@item skip-completed-text
+@vindex skip-completed-text
+If set to @samp{on}, this alters the default completion behavior when
+inserting a single match into the line.  It's only active when
+performing completion in the middle of a word.  If enabled, readline
+does not insert characters from the completion that match characters
+after point in the word being completed, so portions of the word
+following the cursor are not duplicated.
+For instance, if this is enabled, attempting completion when the cursor
+is after the @samp{e} in @samp{Makefile} will result in @samp{Makefile}
+rather than @samp{Makefilefile}, assuming there is a single possible
+completion.
+The default value is @samp{off}.
+
+@item vi-cmd-mode-string
+@vindex vi-cmd-mode-string
+If the @var{show-mode-in-prompt} variable is enabled,
+this string is displayed immediately before the last line of the primary
+prompt when vi editing mode is active and in command mode.
+The value is expanded like a
+key binding, so the standard set of meta- and control prefixes and
+backslash escape sequences is available.
+Use the @samp{\1} and @samp{\2} escapes to begin and end sequences of
+non-printing characters, which can be used to embed a terminal control
+sequence into the mode string.
+The default is @samp{(cmd)}.
+
+@item vi-ins-mode-string
+@vindex vi-ins-mode-string
+If the @var{show-mode-in-prompt} variable is enabled,
+this string is displayed immediately before the last line of the primary
+prompt when vi editing mode is active and in insertion mode.
+The value is expanded like a
+key binding, so the standard set of meta- and control prefixes and
+backslash escape sequences is available.
+Use the @samp{\1} and @samp{\2} escapes to begin and end sequences of
+non-printing characters, which can be used to embed a terminal control
+sequence into the mode string.
+The default is @samp{(ins)}.
+
+@item visible-stats
+@vindex visible-stats
+If set to @samp{on}, a character denoting a file's type
+is appended to the filename when listing possible
+completions.  The default is @samp{off}.
+
+@end table
+
+@item Key Bindings
+The syntax for controlling key bindings in the init file is
+simple.  First you need to find the name of the command that you
+want to change.  The following sections contain tables of the command
+name, the default keybinding, if any, and a short description of what
+the command does.
+
+Once you know the name of the command, simply place on a line
+in the init file the name of the key
+you wish to bind the command to, a colon, and then the name of the
+command.
+There can be no space between the key name and the colon -- that will be
+interpreted as part of the key name.
+The name of the key can be expressed in different ways, depending on
+what you find most comfortable.
+
+In addition to command names, readline allows keys to be bound
+to a string that is inserted when the key is pressed (a @var{macro}).
+
+@ifset BashFeatures
+The @w{@code{bind -p}} command displays Readline function names and
+bindings in a format that can put directly into an initialization file.
+@xref{Bash Builtins}.
+@end ifset
+
+@table @asis
+@item @w{@var{keyname}: @var{function-name} or @var{macro}}
+@var{keyname} is the name of a key spelled out in English.  For example:
+@example
+Control-u: universal-argument
+Meta-Rubout: backward-kill-word
+Control-o: "> output"
+@end example
+
+In the example above, @kbd{C-u} is bound to the function
+@code{universal-argument},
+@kbd{M-DEL} is bound to the function @code{backward-kill-word}, and
+@kbd{C-o} is bound to run the macro
+expressed on the right hand side (that is, to insert the text
+@samp{> output} into the line).
+
+A number of symbolic character names are recognized while
+processing this key binding syntax:
+@var{DEL},
+@var{ESC},
+@var{ESCAPE},
+@var{LFD},
+@var{NEWLINE},
+@var{RET},
+@var{RETURN},
+@var{RUBOUT},
+@var{SPACE},
+@var{SPC},
+and
+@var{TAB}.
+
+@item @w{"@var{keyseq}": @var{function-name} or @var{macro}}
+@var{keyseq} differs from @var{keyname} above in that strings
+denoting an entire key sequence can be specified, by placing
+the key sequence in double quotes.  Some @sc{gnu} Emacs style key
+escapes can be used, as in the following example, but the
+special character names are not recognized.
+
+@example
+"\C-u": universal-argument
+"\C-x\C-r": re-read-init-file
+"\e[11~": "Function Key 1"
+@end example
+
+In the above example, @kbd{C-u} is again bound to the function
+@code{universal-argument} (just as it was in the first example),
+@samp{@kbd{C-x} @kbd{C-r}} is bound to the function @code{re-read-init-file},
+and @samp{@key{ESC} @key{[} @key{1} @key{1} @key{~}} is bound to insert
+the text @samp{Function Key 1}.
+
+@end table
+
+The following @sc{gnu} Emacs style escape sequences are available when
+specifying key sequences:
+
+@table @code
+@item @kbd{\C-}
+control prefix
+@item @kbd{\M-}
+meta prefix
+@item @kbd{\e}
+an escape character
+@item @kbd{\\}
+backslash
+@item @kbd{\"}
+@key{"}, a double quotation mark
+@item @kbd{\'}
+@key{'}, a single quote or apostrophe
+@end table
+
+In addition to the @sc{gnu} Emacs style escape sequences, a second
+set of backslash escapes is available:
+
+@table @code
+@item \a
+alert (bell)
+@item \b
+backspace
+@item \d
+delete
+@item \f
+form feed
+@item \n
+newline
+@item \r
+carriage return
+@item \t
+horizontal tab
+@item \v
+vertical tab
+@item \@var{nnn}
+the eight-bit character whose value is the octal value @var{nnn}
+(one to three digits)
+@item \x@var{HH}
+the eight-bit character whose value is the hexadecimal value @var{HH}
+(one or two hex digits)
+@end table
+
+When entering the text of a macro, single or double quotes must
+be used to indicate a macro definition.
+Unquoted text is assumed to be a function name.
+In the macro body, the backslash escapes described above are expanded.
+Backslash will quote any other character in the macro text,
+including @samp{"} and @samp{'}.
+For example, the following binding will make @samp{@kbd{C-x} \}
+insert a single @samp{\} into the line:
+@example
+"\C-x\\": "\\"
+@end example
+
+@end table
+
+@node Conditional Init Constructs
+@subsection Conditional Init Constructs
+
+Readline implements a facility similar in spirit to the conditional
+compilation features of the C preprocessor which allows key
+bindings and variable settings to be performed as the result
+of tests.  There are four parser directives used.
+
+@table @code
+@item $if
+The @code{$if} construct allows bindings to be made based on the
+editing mode, the terminal being used, or the application using
+Readline.  The text of the test, after any comparison operator,
+extends to the end of the line;
+unless otherwise noted, no characters are required to isolate it.
+
+@table @code
+@item mode
+The @code{mode=} form of the @code{$if} directive is used to test
+whether Readline is in @code{emacs} or @code{vi} mode.
+This may be used in conjunction
+with the @samp{set keymap} command, for instance, to set bindings in
+the @code{emacs-standard} and @code{emacs-ctlx} keymaps only if
+Readline is starting out in @code{emacs} mode.
+
+@item term
+The @code{term=} form may be used to include terminal-specific
+key bindings, perhaps to bind the key sequences output by the
+terminal's function keys.  The word on the right side of the
+@samp{=} is tested against both the full name of the terminal and
+the portion of the terminal name before the first @samp{-}.  This
+allows @code{sun} to match both @code{sun} and @code{sun-cmd},
+for instance.
+
+@item version
+The @code{version} test may be used to perform comparisons against
+specific Readline versions.
+The @code{version} expands to the current Readline version.
+The set of comparison operators includes
+@samp{=} (and @samp{==}), @samp{!=}, @samp{<=}, @samp{>=}, @samp{<},
+and @samp{>}.
+The version number supplied on the right side of the operator consists
+of a major version number, an optional decimal point, and an optional
+minor version (e.g., @samp{7.1}). If the minor version is omitted, it
+is assumed to be @samp{0}.
+The operator may be separated from the string @code{version} and
+from the version number argument by whitespace.
+The following example sets a variable if the Readline version being used
+is 7.0 or newer:
+@example
+$if version >= 7.0
+set show-mode-in-prompt on
+$endif
+@end example
+
+@item application
+The @var{application} construct is used to include
+application-specific settings.  Each program using the Readline
+library sets the @var{application name}, and you can test for
+a particular value. 
+This could be used to bind key sequences to functions useful for
+a specific program.  For instance, the following command adds a
+key sequence that quotes the current or previous word in Bash:
+@example
+$if Bash
+# Quote the current or previous word
+"\C-xq": "\eb\"\ef\""
+$endif
+@end example
+
+@item variable
+The @var{variable} construct provides simple equality tests for Readline
+variables and values.
+The permitted comparison operators are @samp{=}, @samp{==}, and @samp{!=}.
+The variable name must be separated from the comparison operator by
+whitespace; the operator may be separated from the value on the right hand
+side by whitespace.
+Both string and boolean variables may be tested. Boolean variables must be
+tested against the values @var{on} and @var{off}.
+The following example is equivalent to the @code{mode=emacs} test described
+above:
+@example
+$if editing-mode == emacs
+set show-mode-in-prompt on
+$endif
+@end example
+@end table
+
+@item $endif
+This command, as seen in the previous example, terminates an
+@code{$if} command.
+
+@item $else
+Commands in this branch of the @code{$if} directive are executed if
+the test fails.
+
+@item $include
+This directive takes a single filename as an argument and reads commands
+and bindings from that file.
+For example, the following directive reads from @file{/etc/inputrc}:
+@example
+$include /etc/inputrc
+@end example
+@end table
+
+@node Sample Init File
+@subsection Sample Init File
+
+Here is an example of an @var{inputrc} file.  This illustrates key
+binding, variable assignment, and conditional syntax.
+
+@example
+@page
+# This file controls the behaviour of line input editing for
+# programs that use the GNU Readline library.  Existing
+# programs include FTP, Bash, and GDB.
+#
+# You can re-read the inputrc file with C-x C-r.
+# Lines beginning with '#' are comments.
+#
+# First, include any system-wide bindings and variable
+# assignments from /etc/Inputrc
+$include /etc/Inputrc
+
+#
+# Set various bindings for emacs mode.
+
+set editing-mode emacs 
+
+$if mode=emacs
+
+Meta-Control-h:	backward-kill-word	Text after the function name is ignored
+
+#
+# Arrow keys in keypad mode
+#
+#"\M-OD":        backward-char
+#"\M-OC":        forward-char
+#"\M-OA":        previous-history
+#"\M-OB":        next-history
+#
+# Arrow keys in ANSI mode
+#
+"\M-[D":        backward-char
+"\M-[C":        forward-char
+"\M-[A":        previous-history
+"\M-[B":        next-history
+#
+# Arrow keys in 8 bit keypad mode
+#
+#"\M-\C-OD":       backward-char
+#"\M-\C-OC":       forward-char
+#"\M-\C-OA":       previous-history
+#"\M-\C-OB":       next-history
+#
+# Arrow keys in 8 bit ANSI mode
+#
+#"\M-\C-[D":       backward-char
+#"\M-\C-[C":       forward-char
+#"\M-\C-[A":       previous-history
+#"\M-\C-[B":       next-history
+
+C-q: quoted-insert
+
+$endif
+
+# An old-style binding.  This happens to be the default.
+TAB: complete
+
+# Macros that are convenient for shell interaction
+$if Bash
+# edit the path
+"\C-xp": "PATH=$@{PATH@}\e\C-e\C-a\ef\C-f"
+# prepare to type a quoted word --
+# insert open and close double quotes
+# and move to just after the open quote
+"\C-x\"": "\"\"\C-b"
+# insert a backslash (testing backslash escapes
+# in sequences and macros)
+"\C-x\\": "\\"
+# Quote the current or previous word
+"\C-xq": "\eb\"\ef\""
+# Add a binding to refresh the line, which is unbound
+"\C-xr": redraw-current-line
+# Edit variable on current line.
+"\M-\C-v": "\C-a\C-k$\C-y\M-\C-e\C-a\C-y="
+$endif
+
+# use a visible bell if one is available
+set bell-style visible
+
+# don't strip characters to 7 bits when reading
+set input-meta on
+
+# allow iso-latin1 characters to be inserted rather
+# than converted to prefix-meta sequences
+set convert-meta off
+
+# display characters with the eighth bit set directly
+# rather than as meta-prefixed characters
+set output-meta on
+
+# if there are 150 or more possible completions for a word,
+# ask whether or not the user wants to see all of them
+set completion-query-items 150
+
+# For FTP
+$if Ftp
+"\C-xg": "get \M-?"
+"\C-xt": "put \M-?"
+"\M-.": yank-last-arg
+$endif
+@end example
+
+@node Bindable Readline Commands
+@section Bindable Readline Commands
+
+@menu
+* Commands For Moving::		Moving about the line.
+* Commands For History::	Getting at previous lines.
+* Commands For Text::		Commands for changing text.
+* Commands For Killing::	Commands for killing and yanking.
+* Numeric Arguments::		Specifying numeric arguments, repeat counts.
+* Commands For Completion::	Getting Readline to do the typing for you.
+* Keyboard Macros::		Saving and re-executing typed characters
+* Miscellaneous Commands::	Other miscellaneous commands.
+@end menu
+
+This section describes Readline commands that may be bound to key
+sequences.
+@ifset BashFeatures
+You can list your key bindings by executing
+@w{@code{bind -P}} or, for a more terse format, suitable for an
+@var{inputrc} file, @w{@code{bind -p}}.  (@xref{Bash Builtins}.)
+@end ifset
+Command names without an accompanying key sequence are unbound by default.
+
+In the following descriptions, @dfn{point} refers to the current cursor
+position, and @dfn{mark} refers to a cursor position saved by the
+@code{set-mark} command.
+The text between the point and mark is referred to as the @dfn{region}.
+
+@node Commands For Moving
+@subsection Commands For Moving
+@ftable @code
+@item beginning-of-line (C-a)
+Move to the start of the current line.
+
+@item end-of-line (C-e)
+Move to the end of the line.
+
+@item forward-char (C-f)
+Move forward a character.
+
+@item backward-char (C-b)
+Move back a character.
+
+@item forward-word (M-f)
+Move forward to the end of the next word.
+Words are composed of letters and digits.
+
+@item backward-word (M-b)
+Move back to the start of the current or previous word.
+Words are composed of letters and digits.
+
+@ifset BashFeatures
+@item shell-forward-word (M-C-f)
+Move forward to the end of the next word.
+Words are delimited by non-quoted shell metacharacters.
+
+@item shell-backward-word (M-C-b)
+Move back to the start of the current or previous word.
+Words are delimited by non-quoted shell metacharacters.
+@end ifset
+
+@item previous-screen-line ()
+Attempt to move point to the same physical screen column on the previous
+physical screen line. This will not have the desired effect if the current
+Readline line does not take up more than one physical line or if point is not
+greater than the length of the prompt plus the screen width.
+
+@item next-screen-line ()
+Attempt to move point to the same physical screen column on the next
+physical screen line. This will not have the desired effect if the current
+Readline line does not take up more than one physical line or if the length
+of the current Readline line is not greater than the length of the prompt
+plus the screen width.
+
+@item clear-display (M-C-l)
+Clear the screen and, if possible, the terminal's scrollback buffer,
+then redraw the current line,
+leaving the current line at the top of the screen.
+
+@item clear-screen (C-l)
+Clear the screen,
+then redraw the current line,
+leaving the current line at the top of the screen.
+
+@item redraw-current-line ()
+Refresh the current line.  By default, this is unbound.
+
+@end ftable
+
+@node Commands For History
+@subsection Commands For Manipulating The History
+
+@ftable @code
+@item accept-line (Newline or Return)
+@ifset BashFeatures
+Accept the line regardless of where the cursor is.
+If this line is
+non-empty, add it to the history list according to the setting of
+the @env{HISTCONTROL} and @env{HISTIGNORE} variables.
+If this line is a modified history line, then restore the history line
+to its original state.
+@end ifset
+@ifclear BashFeatures
+Accept the line regardless of where the cursor is.
+If this line is
+non-empty, it may be added to the history list for future recall with
+@code{add_history()}.
+If this line is a modified history line, the history line is restored
+to its original state.
+@end ifclear
+
+@item previous-history (C-p)
+Move `back' through the history list, fetching the previous command.
+
+@item next-history (C-n)
+Move `forward' through the history list, fetching the next command.
+
+@item beginning-of-history (M-<)
+Move to the first line in the history.
+
+@item end-of-history (M->)
+Move to the end of the input history, i.e., the line currently
+being entered.
+
+@item reverse-search-history (C-r)
+Search backward starting at the current line and moving `up' through
+the history as necessary.  This is an incremental search.
+This command sets the region to the matched text and activates the mark.
+
+@item forward-search-history (C-s)
+Search forward starting at the current line and moving `down' through
+the history as necessary.  This is an incremental search.
+This command sets the region to the matched text and activates the mark.
+
+@item non-incremental-reverse-search-history (M-p)
+Search backward starting at the current line and moving `up'
+through the history as necessary using a non-incremental search
+for a string supplied by the user.
+The search string may match anywhere in a history line.
+
+@item non-incremental-forward-search-history (M-n)
+Search forward starting at the current line and moving `down'
+through the history as necessary using a non-incremental search
+for a string supplied by the user.
+The search string may match anywhere in a history line.
+
+@item history-search-forward ()
+Search forward through the history for the string of characters
+between the start of the current line and the point.
+The search string must match at the beginning of a history line.
+This is a non-incremental search.
+By default, this command is unbound.
+
+@item history-search-backward ()
+Search backward through the history for the string of characters
+between the start of the current line and the point.
+The search string must match at the beginning of a history line.
+This is a non-incremental search.
+By default, this command is unbound.
+
+@item history-substring-search-forward ()
+Search forward through the history for the string of characters
+between the start of the current line and the point.
+The search string may match anywhere in a history line.
+This is a non-incremental search.
+By default, this command is unbound.
+
+@item history-substring-search-backward ()
+Search backward through the history for the string of characters
+between the start of the current line and the point.
+The search string may match anywhere in a history line.
+This is a non-incremental search.
+By default, this command is unbound.
+
+@item yank-nth-arg (M-C-y)
+Insert the first argument to the previous command (usually
+the second word on the previous line) at point.
+With an argument @var{n},
+insert the @var{n}th word from the previous command (the words
+in the previous command begin with word 0).  A negative argument
+inserts the @var{n}th word from the end of the previous command.
+Once the argument @var{n} is computed, the argument is extracted
+as if the @samp{!@var{n}} history expansion had been specified.
+
+@item yank-last-arg (M-. or M-_)
+Insert last argument to the previous command (the last word of the
+previous history entry).
+With a numeric argument, behave exactly like @code{yank-nth-arg}.
+Successive calls to @code{yank-last-arg} move back through the history
+list, inserting the last word (or the word specified by the argument to
+the first call) of each line in turn.
+Any numeric argument supplied to these successive calls determines
+the direction to move through the history.  A negative argument switches
+the direction through the history (back or forward).
+The history expansion facilities are used to extract the last argument,
+as if the @samp{!$} history expansion had been specified.
+
+@item operate-and-get-next (C-o)
+Accept the current line for return to the calling application as if a
+newline had been entered,
+and fetch the next line relative to the current line from the history
+for editing.
+A numeric argument, if supplied, specifies the history entry to use instead
+of the current line.
+
+@end ftable
+
+@node Commands For Text
+@subsection Commands For Changing Text
+
+@ftable @code
+
+@item @i{end-of-file} (usually C-d)
+The character indicating end-of-file as set, for example, by
+@code{stty}.  If this character is read when there are no characters
+on the line, and point is at the beginning of the line, Readline
+interprets it as the end of input and returns @sc{eof}.
+
+@item delete-char (C-d)
+Delete the character at point.  If this function is bound to the
+same character as the tty @sc{eof} character, as @kbd{C-d}
+commonly is, see above for the effects.
+
+@item backward-delete-char (Rubout)
+Delete the character behind the cursor.  A numeric argument means
+to kill the characters instead of deleting them.
+
+@item forward-backward-delete-char ()
+Delete the character under the cursor, unless the cursor is at the
+end of the line, in which case the character behind the cursor is
+deleted.  By default, this is not bound to a key.
+
+@item quoted-insert (C-q or C-v)
+Add the next character typed to the line verbatim.  This is
+how to insert key sequences like @kbd{C-q}, for example.
+
+@ifclear BashFeatures
+@item tab-insert (M-@key{TAB})
+Insert a tab character.
+@end ifclear
+
+@item self-insert (a, b, A, 1, !, @dots{})
+Insert yourself.
+
+@item bracketed-paste-begin ()
+This function is intended to be bound to the "bracketed paste" escape
+sequence sent by some terminals, and such a binding is assigned by default.
+It allows Readline to insert the pasted text as a single unit without treating
+each character as if it had been read from the keyboard.  The characters
+are inserted as if each one was bound to @code{self-insert} instead of
+executing any editing commands.
+
+Bracketed paste sets the region (the characters between point and the mark)
+to the inserted text. It uses the concept of an @emph{active mark}: when the
+mark is active, Readline redisplay uses the terminal's standout mode to
+denote the region.
+
+@item transpose-chars (C-t)
+Drag the character before the cursor forward over
+the character at the cursor, moving the
+cursor forward as well.  If the insertion point
+is at the end of the line, then this
+transposes the last two characters of the line.
+Negative arguments have no effect.
+
+@item transpose-words (M-t)
+Drag the word before point past the word after point,
+moving point past that word as well.
+If the insertion point is at the end of the line, this transposes
+the last two words on the line.
+
+@item upcase-word (M-u)
+Uppercase the current (or following) word.  With a negative argument,
+uppercase the previous word, but do not move the cursor.
+
+@item downcase-word (M-l)
+Lowercase the current (or following) word.  With a negative argument,
+lowercase the previous word, but do not move the cursor.
+
+@item capitalize-word (M-c)
+Capitalize the current (or following) word.  With a negative argument,
+capitalize the previous word, but do not move the cursor.
+
+@item overwrite-mode ()
+Toggle overwrite mode.  With an explicit positive numeric argument,
+switches to overwrite mode.  With an explicit non-positive numeric
+argument, switches to insert mode.  This command affects only
+@code{emacs} mode; @code{vi} mode does overwrite differently.
+Each call to @code{readline()} starts in insert mode.
+
+In overwrite mode, characters bound to @code{self-insert} replace
+the text at point rather than pushing the text to the right.
+Characters bound to @code{backward-delete-char} replace the character
+before point with a space.
+
+By default, this command is unbound.
+
+@end ftable
+
+@node Commands For Killing
+@subsection Killing And Yanking
+
+@ftable @code
+
+@item kill-line (C-k)
+Kill the text from point to the end of the line.
+With a negative numeric argument, kill backward from the cursor to the
+beginning of the current line.
+
+@item backward-kill-line (C-x Rubout)
+Kill backward from the cursor to the beginning of the current line.
+With a negative numeric argument, kill forward from the cursor to the
+end of the current line.
+
+@item unix-line-discard (C-u)
+Kill backward from the cursor to the beginning of the current line.
+
+@item kill-whole-line ()
+Kill all characters on the current line, no matter where point is.
+By default, this is unbound.
+
+@item kill-word (M-d)
+Kill from point to the end of the current word, or if between
+words, to the end of the next word.
+Word boundaries are the same as @code{forward-word}.
+
+@item backward-kill-word (M-@key{DEL})
+Kill the word behind point.
+Word boundaries are the same as @code{backward-word}.
+
+@ifset BashFeatures
+@item shell-kill-word (M-C-d)
+Kill from point to the end of the current word, or if between
+words, to the end of the next word.
+Word boundaries are the same as @code{shell-forward-word}.
+
+@item shell-backward-kill-word ()
+Kill the word behind point.
+Word boundaries are the same as @code{shell-backward-word}.
+@end ifset
+
+@item shell-transpose-words (M-C-t)
+Drag the word before point past the word after point,
+moving point past that word as well.
+If the insertion point is at the end of the line, this transposes
+the last two words on the line.
+Word boundaries are the same as @code{shell-forward-word} and
+@code{shell-backward-word}.
+
+@item unix-word-rubout (C-w)
+Kill the word behind point, using white space as a word boundary.
+The killed text is saved on the kill-ring.
+
+@item unix-filename-rubout ()
+Kill the word behind point, using white space and the slash character
+as the word boundaries.
+The killed text is saved on the kill-ring.
+
+@item delete-horizontal-space ()
+Delete all spaces and tabs around point.  By default, this is unbound.
+
+@item kill-region ()
+Kill the text in the current region.
+By default, this command is unbound.
+
+@item copy-region-as-kill ()
+Copy the text in the region to the kill buffer, so it can be yanked
+right away.  By default, this command is unbound.
+
+@item copy-backward-word ()
+Copy the word before point to the kill buffer.
+The word boundaries are the same as @code{backward-word}.
+By default, this command is unbound.
+
+@item copy-forward-word ()
+Copy the word following point to the kill buffer.
+The word boundaries are the same as @code{forward-word}.
+By default, this command is unbound.
+
+@item yank (C-y)
+Yank the top of the kill ring into the buffer at point.
+
+@item yank-pop (M-y)
+Rotate the kill-ring, and yank the new top.  You can only do this if
+the prior command is @code{yank} or @code{yank-pop}.
+@end ftable
+
+@node Numeric Arguments
+@subsection Specifying Numeric Arguments
+@ftable @code
+
+@item digit-argument (@kbd{M-0}, @kbd{M-1}, @dots{} @kbd{M--})
+Add this digit to the argument already accumulating, or start a new
+argument.  @kbd{M--} starts a negative argument.
+
+@item universal-argument ()
+This is another way to specify an argument.
+If this command is followed by one or more digits, optionally with a
+leading minus sign, those digits define the argument.
+If the command is followed by digits, executing @code{universal-argument}
+again ends the numeric argument, but is otherwise ignored.
+As a special case, if this command is immediately followed by a
+character that is neither a digit nor minus sign, the argument count
+for the next command is multiplied by four.
+The argument count is initially one, so executing this function the
+first time makes the argument count four, a second time makes the
+argument count sixteen, and so on.
+By default, this is not bound to a key.
+@end ftable
+
+@node Commands For Completion
+@subsection Letting Readline Type For You
+
+@ftable @code
+@item complete (@key{TAB})
+Attempt to perform completion on the text before point.
+The actual completion performed is application-specific.
+@ifset BashFeatures
+Bash attempts completion treating the text as a variable (if the
+text begins with @samp{$}), username (if the text begins with
+@samp{~}), hostname (if the text begins with @samp{@@}), or
+command (including aliases and functions) in turn.  If none 
+of these produces a match, filename completion is attempted.
+@end ifset
+@ifclear BashFeatures
+The default is filename completion.
+@end ifclear
+
+@item possible-completions (M-?)
+List the possible completions of the text before point.
+When displaying completions, Readline sets the number of columns used
+for display to the value of @code{completion-display-width}, the value of
+the environment variable @env{COLUMNS}, or the screen width, in that order.
+
+@item insert-completions (M-*)
+Insert all completions of the text before point that would have
+been generated by @code{possible-completions}.
+
+@item menu-complete ()
+Similar to @code{complete}, but replaces the word to be completed
+with a single match from the list of possible completions.
+Repeated execution of @code{menu-complete} steps through the list
+of possible completions, inserting each match in turn.
+At the end of the list of completions, the bell is rung
+(subject to the setting of @code{bell-style})
+and the original text is restored.
+An argument of @var{n} moves @var{n} positions forward in the list
+of matches; a negative argument may be used to move backward
+through the list.
+This command is intended to be bound to @key{TAB}, but is unbound
+by default.
+
+@item menu-complete-backward ()
+Identical to @code{menu-complete}, but moves backward through the list
+of possible completions, as if @code{menu-complete} had been given a
+negative argument.
+
+@item delete-char-or-list ()
+Deletes the character under the cursor if not at the beginning or
+end of the line (like @code{delete-char}).
+If at the end of the line, behaves identically to
+@code{possible-completions}.
+This command is unbound by default.
+
+@ifset BashFeatures
+@item complete-filename (M-/)
+Attempt filename completion on the text before point.
+
+@item possible-filename-completions (C-x /)
+List the possible completions of the text before point,
+treating it as a filename.
+
+@item complete-username (M-~)
+Attempt completion on the text before point, treating
+it as a username.
+
+@item possible-username-completions (C-x ~)
+List the possible completions of the text before point,
+treating it as a username.
+
+@item complete-variable (M-$)
+Attempt completion on the text before point, treating
+it as a shell variable.
+
+@item possible-variable-completions (C-x $)
+List the possible completions of the text before point,
+treating it as a shell variable.
+
+@item complete-hostname (M-@@)
+Attempt completion on the text before point, treating
+it as a hostname.
+
+@item possible-hostname-completions (C-x @@)
+List the possible completions of the text before point,
+treating it as a hostname.
+
+@item complete-command (M-!)
+Attempt completion on the text before point, treating
+it as a command name.  Command completion attempts to
+match the text against aliases, reserved words, shell
+functions, shell builtins, and finally executable filenames,
+in that order.
+
+@item possible-command-completions (C-x !)
+List the possible completions of the text before point,
+treating it as a command name.
+
+@item dynamic-complete-history (M-@key{TAB})
+Attempt completion on the text before point, comparing
+the text against lines from the history list for possible
+completion matches.
+
+@item dabbrev-expand ()
+Attempt menu completion on the text before point, comparing
+the text against lines from the history list for possible
+completion matches.
+
+@item complete-into-braces (M-@{)
+Perform filename completion and insert the list of possible completions
+enclosed within braces so the list is available to the shell
+(@pxref{Brace Expansion}).
+
+@end ifset
+@end ftable
+
+@node Keyboard Macros
+@subsection Keyboard Macros
+@ftable @code
+
+@item start-kbd-macro (C-x ()
+Begin saving the characters typed into the current keyboard macro.
+
+@item end-kbd-macro (C-x ))
+Stop saving the characters typed into the current keyboard macro
+and save the definition.
+
+@item call-last-kbd-macro (C-x e)
+Re-execute the last keyboard macro defined, by making the characters
+in the macro appear as if typed at the keyboard.
+
+@item print-last-kbd-macro ()
+Print the last keboard macro defined in a format suitable for the
+@var{inputrc} file.
+
+@end ftable
+
+@node Miscellaneous Commands
+@subsection Some Miscellaneous Commands
+@ftable @code
+
+@item re-read-init-file (C-x C-r)
+Read in the contents of the @var{inputrc} file, and incorporate
+any bindings or variable assignments found there.
+
+@item abort (C-g)
+Abort the current editing command and
+ring the terminal's bell (subject to the setting of
+@code{bell-style}).
+
+@item do-lowercase-version (M-A, M-B, M-@var{x}, @dots{})
+If the metafied character @var{x} is upper case, run the command
+that is bound to the corresponding metafied lower case character.
+The behavior is undefined if @var{x} is already lower case.
+
+@item prefix-meta (@key{ESC})
+Metafy the next character typed.  This is for keyboards
+without a meta key.  Typing @samp{@key{ESC} f} is equivalent to typing
+@kbd{M-f}.
+
+@item undo (C-_ or C-x C-u)
+Incremental undo, separately remembered for each line.
+
+@item revert-line (M-r)
+Undo all changes made to this line.  This is like executing the @code{undo}
+command enough times to get back to the beginning.
+
+@ifset BashFeatures
+@item tilde-expand (M-&)
+@end ifset
+@ifclear BashFeatures
+@item tilde-expand (M-~)
+@end ifclear
+Perform tilde expansion on the current word.
+
+@item set-mark (C-@@)
+Set the mark to the point.  If a
+numeric argument is supplied, the mark is set to that position.
+
+@item exchange-point-and-mark (C-x C-x)
+Swap the point with the mark.  The current cursor position is set to
+the saved position, and the old cursor position is saved as the mark.
+
+@item character-search (C-])
+A character is read and point is moved to the next occurrence of that
+character.  A negative count searches for previous occurrences.
+
+@item character-search-backward (M-C-])
+A character is read and point is moved to the previous occurrence
+of that character.  A negative count searches for subsequent
+occurrences.
+
+@item skip-csi-sequence ()
+Read enough characters to consume a multi-key sequence such as those
+defined for keys like Home and End.  Such sequences begin with a
+Control Sequence Indicator (CSI), usually ESC-[.  If this sequence is
+bound to "\e[", keys producing such sequences will have no effect
+unless explicitly bound to a readline command, instead of inserting
+stray characters into the editing buffer.  This is unbound by default,
+but usually bound to ESC-[.
+
+@item insert-comment (M-#)
+Without a numeric argument, the value of the @code{comment-begin}
+variable is inserted at the beginning of the current line.
+If a numeric argument is supplied, this command acts as a toggle:  if
+the characters at the beginning of the line do not match the value
+of @code{comment-begin}, the value is inserted, otherwise
+the characters in @code{comment-begin} are deleted from the beginning of
+the line.
+In either case, the line is accepted as if a newline had been typed.
+@ifset BashFeatures
+The default value of @code{comment-begin} causes this command
+to make the current line a shell comment.
+If a numeric argument causes the comment character to be removed, the line
+will be executed by the shell.
+@end ifset
+
+@item dump-functions ()
+Print all of the functions and their key bindings to the
+Readline output stream.  If a numeric argument is supplied,
+the output is formatted in such a way that it can be made part
+of an @var{inputrc} file.  This command is unbound by default.
+
+@item dump-variables ()
+Print all of the settable variables and their values to the
+Readline output stream.  If a numeric argument is supplied,
+the output is formatted in such a way that it can be made part
+of an @var{inputrc} file.  This command is unbound by default.
+
+@item dump-macros ()
+Print all of the Readline key sequences bound to macros and the
+strings they output.  If a numeric argument is supplied,
+the output is formatted in such a way that it can be made part
+of an @var{inputrc} file.  This command is unbound by default.
+
+@ifset BashFeatures
+@item glob-complete-word (M-g)
+The word before point is treated as a pattern for pathname expansion,
+with an asterisk implicitly appended.  This pattern is used to
+generate a list of matching file names for possible completions.
+
+@item glob-expand-word (C-x *)
+The word before point is treated as a pattern for pathname expansion,
+and the list of matching file names is inserted, replacing the word.
+If a numeric argument is supplied, a @samp{*} is appended before
+pathname expansion.
+
+@item glob-list-expansions (C-x g)
+The list of expansions that would have been generated by
+@code{glob-expand-word} is displayed, and the line is redrawn.
+If a numeric argument is supplied, a @samp{*} is appended before
+pathname expansion.
+
+@item display-shell-version (C-x C-v)
+Display version information about the current instance of Bash.
+
+@item shell-expand-line (M-C-e)
+Expand the line as the shell does.
+This performs alias and history expansion as well as all of the shell
+word expansions (@pxref{Shell Expansions}).
+
+@item history-expand-line (M-^)
+Perform history expansion on the current line.
+
+@item magic-space ()
+Perform history expansion on the current line and insert a space
+(@pxref{History Interaction}).
+
+@item alias-expand-line ()
+Perform alias expansion on the current line (@pxref{Aliases}).
+
+@item history-and-alias-expand-line ()
+Perform history and alias expansion on the current line.
+
+@item insert-last-argument (M-. or M-_)
+A synonym for @code{yank-last-arg}.
+
+@item edit-and-execute-command (C-x C-e)
+Invoke an editor on the current command line, and execute the result as shell
+commands.
+Bash attempts to invoke
+@code{$VISUAL}, @code{$EDITOR}, and @code{emacs}
+as the editor, in that order.
+
+@end ifset
+
+@ifclear BashFeatures
+@item emacs-editing-mode (C-e)
+When in @code{vi} command mode, this causes a switch to @code{emacs}
+editing mode.
+
+@item vi-editing-mode (M-C-j)
+When in @code{emacs} editing mode, this causes a switch to @code{vi}
+editing mode.
+
+@end ifclear
+
+@end ftable
+
+@node Readline vi Mode
+@section Readline vi Mode
+
+While the Readline library does not have a full set of @code{vi}
+editing functions, it does contain enough to allow simple editing
+of the line.  The Readline @code{vi} mode behaves as specified in
+the @sc{posix} standard.
+
+@ifset BashFeatures
+In order to switch interactively between @code{emacs} and @code{vi}
+editing modes, use the @samp{set -o emacs} and @samp{set -o vi}
+commands (@pxref{The Set Builtin}).
+@end ifset
+@ifclear BashFeatures
+In order to switch interactively between @code{emacs} and @code{vi}
+editing modes, use the command @kbd{M-C-j} (bound to emacs-editing-mode
+when in @code{vi} mode and to vi-editing-mode in @code{emacs} mode).
+@end ifclear
+The Readline default is @code{emacs} mode.
+
+When you enter a line in @code{vi} mode, you are already placed in
+`insertion' mode, as if you had typed an @samp{i}.  Pressing @key{ESC}
+switches you into `command' mode, where you can edit the text of the
+line with the standard @code{vi} movement keys, move to previous
+history lines with @samp{k} and subsequent lines with @samp{j}, and
+so forth.
+
+@ifset BashFeatures
+@node Programmable Completion
+@section Programmable Completion
+@cindex programmable completion
+
+When word completion is attempted for an argument to a command for
+which a completion specification (a @var{compspec}) has been defined
+using the @code{complete} builtin (@pxref{Programmable Completion Builtins}),
+the programmable completion facilities are invoked. 
+
+First, the command name is identified.
+If a compspec has been defined for that command, the
+compspec is used to generate the list of possible completions for the word.
+If the command word is the empty string (completion attempted at the
+beginning of an empty line), any compspec defined with
+the @option{-E} option to @code{complete} is used.
+If the command word is a full pathname, a compspec for the full
+pathname is searched for first.
+If no compspec is found for the full pathname, an attempt is made to
+find a compspec for the portion following the final slash.
+If those searches do not result in a compspec, any compspec defined with
+the @option{-D} option to @code{complete} is used as the default.
+If there is no default compspec, Bash attempts alias expansion
+on the command word as a final resort, and attempts to find a compspec
+for the command word from any successful expansion 
+
+Once a compspec has been found, it is used to generate the list of
+matching words.
+If a compspec is not found, the default Bash completion
+described above (@pxref{Commands For Completion}) is performed.
+
+First, the actions specified by the compspec are used.
+Only matches which are prefixed by the word being completed are
+returned.
+When the @option{-f} or @option{-d} option is used for filename or
+directory name completion, the shell variable @env{FIGNORE} is
+used to filter the matches.
+@xref{Bash Variables}, for a description of @env{FIGNORE}.
+
+Any completions specified by a filename expansion pattern to the
+@option{-G} option are generated next.
+The words generated by the pattern need not match the word being completed.
+The @env{GLOBIGNORE} shell variable is not used to filter the matches,
+but the @env{FIGNORE} shell variable is used.
+
+Next, the string specified as the argument to the @option{-W} option
+is considered.
+The string is first split using the characters in the @env{IFS}
+special variable as delimiters.
+Shell quoting is honored within the string, in order to provide a
+mechanism for the words to contain shell metacharacters or characters
+in the value of @env{IFS}.
+Each word is then expanded using
+brace expansion, tilde expansion, parameter and variable expansion,
+command substitution, and arithmetic expansion,
+as described above (@pxref{Shell Expansions}).
+The results are split using the rules described above
+(@pxref{Word Splitting}).
+The results of the expansion are prefix-matched against the word being
+completed, and the matching words become the possible completions.
+
+After these matches have been generated, any shell function or command
+specified with the @option{-F} and @option{-C} options is invoked.
+When the command or function is invoked, the @env{COMP_LINE},
+@env{COMP_POINT}, @env{COMP_KEY}, and @env{COMP_TYPE} variables are
+assigned values as described above (@pxref{Bash Variables}).
+If a shell function is being invoked, the @env{COMP_WORDS} and
+@env{COMP_CWORD} variables are also set.
+When the function or command is invoked, the first argument ($1) is the
+name of the command whose arguments are being completed, the
+second argument ($2) is the word being completed, and the third argument
+($3) is the word preceding the word being completed on the current command
+line.
+No filtering of the generated completions against the word being completed
+is performed; the function or command has complete freedom in generating
+the matches.
+
+Any function specified with @option{-F} is invoked first.
+The function may use any of the shell facilities, including the
+@code{compgen} and @code{compopt} builtins described below
+(@pxref{Programmable Completion Builtins}), to generate the matches.
+It must put the possible completions in the @env{COMPREPLY} array
+variable, one per array element.
+
+Next, any command specified with the @option{-C} option is invoked
+in an environment equivalent to command substitution.
+It should print a list of completions, one per line, to
+the standard output.
+Backslash may be used to escape a newline, if necessary.
+
+After all of the possible completions are generated, any filter
+specified with the @option{-X} option is applied to the list.
+The filter is a pattern as used for pathname expansion; a @samp{&}
+in the pattern is replaced with the text of the word being completed.
+A literal @samp{&} may be escaped with a backslash; the backslash
+is removed before attempting a match.
+Any completion that matches the pattern will be removed from the list.
+A leading @samp{!} negates the pattern; in this case any completion
+not matching the pattern will be removed.
+If the @code{nocasematch} shell option
+(see the description of @code{shopt} in @ref{The Shopt Builtin})
+is enabled, the match is performed without regard to the case
+of alphabetic characters.
+
+Finally, any prefix and suffix specified with the @option{-P} and @option{-S}
+options are added to each member of the completion list, and the result is
+returned to the Readline completion code as the list of possible
+completions.
+
+If the previously-applied actions do not generate any matches, and the
+@option{-o dirnames} option was supplied to @code{complete} when the
+compspec was defined, directory name completion is attempted. 
+
+If the @option{-o plusdirs} option was supplied to @code{complete} when
+the compspec was defined, directory name completion is attempted and any
+matches are added to the results of the other actions.
+
+By default, if a compspec is found, whatever it generates is returned to
+the completion code as the full set of possible completions.
+The default Bash completions are not attempted, and the Readline default
+of filename completion is disabled.
+If the @option{-o bashdefault} option was supplied to @code{complete} when
+the compspec was defined, the default Bash completions are attempted
+if the compspec generates no matches.
+If the @option{-o default} option was supplied to @code{complete} when the
+compspec was defined, Readline's default completion will be performed
+if the compspec (and, if attempted, the default Bash completions)
+generate no matches.
+
+When a compspec indicates that directory name completion is desired,
+the programmable completion functions force Readline to append a slash
+to completed names which are symbolic links to directories, subject to
+the value of the @var{mark-directories} Readline variable, regardless
+of the setting of the @var{mark-symlinked-directories} Readline variable.
+
+There is some support for dynamically modifying completions.  This is
+most useful when used in combination with a default completion specified
+with @option{-D}.  It's possible for shell functions executed as completion
+handlers to indicate that completion should be retried by returning an
+exit status of 124.  If a shell function returns 124, and changes
+the compspec associated with the command on which completion is being
+attempted (supplied as the first argument when the function is executed),
+programmable completion restarts from the beginning, with an
+attempt to find a new compspec for that command.  This allows a set of
+completions to be built dynamically as completion is attempted, rather than
+being loaded all at once.
+
+For instance, assuming that there is a library of compspecs, each kept in a
+file corresponding to the name of the command, the following default
+completion function would load completions dynamically:
+
+@example
+_completion_loader()
+@{
+    . "/etc/bash_completion.d/$1.sh" >/dev/null 2>&1 && return 124
+@}
+complete -D -F _completion_loader -o bashdefault -o default
+@end example
+
+@node Programmable Completion Builtins
+@section Programmable Completion Builtins
+@cindex completion builtins
+
+Three builtin commands are available to manipulate the programmable completion
+facilities: one to specify how the arguments to a particular command are to
+be completed, and two to modify the completion as it is happening.
+
+@table @code
+@item compgen
+@btindex compgen
+@example
+@code{compgen [@var{option}] [@var{word}]}
+@end example
+
+Generate possible completion matches for @var{word} according to
+the @var{option}s, which may be any option accepted by the
+@code{complete}
+builtin with the exception of @option{-p} and @option{-r}, and write
+the matches to the standard output.
+When using the @option{-F} or @option{-C} options, the various shell variables
+set by the programmable completion facilities, while available, will not
+have useful values.
+
+The matches will be generated in the same way as if the programmable
+completion code had generated them directly from a completion specification
+with the same flags.
+If @var{word} is specified, only those completions matching @var{word}
+will be displayed.
+
+The return value is true unless an invalid option is supplied, or no
+matches were generated.
+
+@item complete
+@btindex complete
+@example
+@code{complete [-abcdefgjksuv] [-o @var{comp-option}] [-DEI] [-A @var{action}] [-G @var{globpat}]
+[-W @var{wordlist}] [-F @var{function}] [-C @var{command}] [-X @var{filterpat}]
+[-P @var{prefix}] [-S @var{suffix}] @var{name} [@var{name} @dots{}]}
+@code{complete -pr [-DEI] [@var{name} @dots{}]}
+@end example
+
+Specify how arguments to each @var{name} should be completed.
+If the @option{-p} option is supplied, or if no options are supplied, existing
+completion specifications are printed in a way that allows them to be
+reused as input.
+The @option{-r} option removes a completion specification for
+each @var{name}, or, if no @var{name}s are supplied, all
+completion specifications.
+The @option{-D} option indicates that other supplied options and actions should
+apply to the ``default'' command completion; that is, completion attempted
+on a command for which no completion has previously been defined.
+The @option{-E} option indicates that other supplied options and actions should
+apply to ``empty'' command completion; that is, completion attempted on a 
+blank line.
+The @option{-I} option indicates that other supplied options and actions should
+apply to completion on the initial non-assignment word on the line, or after a
+command delimiter such as @samp{;} or @samp{|}, which is usually command
+name completion.
+If multiple options are supplied, the @option{-D} option takes precedence
+over @option{-E}, and both take precedence over @option{-I}.
+If any of @option{-D}, @option{-E}, or @option{-I} are supplied, any other
+@var{name} arguments are ignored; these completions only apply to the case
+specified by the option.
+
+The process of applying these completion specifications when word completion
+is attempted is described above (@pxref{Programmable Completion}).
+
+Other options, if specified, have the following meanings.
+The arguments to the @option{-G}, @option{-W}, and @option{-X} options
+(and, if necessary, the @option{-P} and @option{-S} options)
+should be quoted to protect them from expansion before the
+@code{complete} builtin is invoked.
+
+
+@table @code
+@item -o @var{comp-option}
+The @var{comp-option} controls several aspects of the compspec's behavior
+beyond the simple generation of completions.
+@var{comp-option} may be one of: 
+
+@table @code
+
+@item bashdefault
+Perform the rest of the default Bash completions if the compspec
+generates no matches.
+
+@item default
+Use Readline's default filename completion if the compspec generates
+no matches.
+
+@item dirnames
+Perform directory name completion if the compspec generates no matches.
+
+@item filenames
+Tell Readline that the compspec generates filenames, so it can perform any
+filename-specific processing (like adding a slash to directory names,
+quoting special characters, or suppressing trailing spaces).
+This option is intended to be used with shell functions specified
+with @option{-F}.
+
+@item noquote
+Tell Readline not to quote the completed words if they are filenames
+(quoting filenames is the default).
+
+@item nosort
+Tell Readline not to sort the list of possible completions alphabetically.
+
+@item nospace
+Tell Readline not to append a space (the default) to words completed at
+the end of the line.
+
+@item plusdirs
+After any matches defined by the compspec are generated, 
+directory name completion is attempted and any
+matches are added to the results of the other actions.
+
+@end table
+
+@item -A @var{action}
+The @var{action} may be one of the following to generate a list of possible
+completions:
+
+@table @code
+@item alias
+Alias names.  May also be specified as @option{-a}.
+
+@item arrayvar
+Array variable names.
+
+@item binding
+Readline key binding names (@pxref{Bindable Readline Commands}).
+
+@item builtin
+Names of shell builtin commands.  May also be specified as @option{-b}.
+
+@item command
+Command names.  May also be specified as @option{-c}.
+
+@item directory
+Directory names.  May also be specified as @option{-d}.
+
+@item disabled
+Names of disabled shell builtins.
+
+@item enabled
+Names of enabled shell builtins.
+
+@item export
+Names of exported shell variables.  May also be specified as @option{-e}.
+
+@item file
+File names.  May also be specified as @option{-f}.
+
+@item function
+Names of shell functions.
+
+@item group
+Group names.  May also be specified as @option{-g}.
+
+@item helptopic
+Help topics as accepted by the @code{help} builtin (@pxref{Bash Builtins}).
+
+@item hostname
+Hostnames, as taken from the file specified by the
+@env{HOSTFILE} shell variable (@pxref{Bash Variables}).
+
+@item job
+Job names, if job control is active.  May also be specified as @option{-j}.
+
+@item keyword
+Shell reserved words.  May also be specified as @option{-k}.
+
+@item running
+Names of running jobs, if job control is active.
+
+@item service
+Service names.  May also be specified as @option{-s}.
+
+@item setopt
+Valid arguments for the @option{-o} option to the @code{set} builtin
+(@pxref{The Set Builtin}).
+
+@item shopt
+Shell option names as accepted by the @code{shopt} builtin
+(@pxref{Bash Builtins}).
+
+@item signal
+Signal names.
+
+@item stopped
+Names of stopped jobs, if job control is active.
+
+@item user
+User names.  May also be specified as @option{-u}.
+
+@item variable
+Names of all shell variables.  May also be specified as @option{-v}.
+@end table
+
+@item -C @var{command}
+@var{command} is executed in a subshell environment, and its output is
+used as the possible completions.
+
+@item -F @var{function}
+The shell function @var{function} is executed in the current shell
+environment.
+When it is executed, $1 is the name of the command whose arguments are
+being completed, $2 is the word being completed, and $3 is the word
+preceding the word being completed, as described above
+(@pxref{Programmable Completion}).
+When it finishes, the possible completions are retrieved from the value
+of the @env{COMPREPLY} array variable.
+
+@item -G @var{globpat}
+The filename expansion pattern @var{globpat} is expanded to generate
+the possible completions.
+
+@item -P @var{prefix}
+@var{prefix} is added at the beginning of each possible completion
+after all other options have been applied.
+
+@item -S @var{suffix}
+@var{suffix} is appended to each possible completion
+after all other options have been applied.
+
+@item -W @var{wordlist}
+The @var{wordlist} is split using the characters in the
+@env{IFS} special variable as delimiters, and each resultant word
+is expanded.
+The possible completions are the members of the resultant list which
+match the word being completed.
+
+@item -X @var{filterpat}
+@var{filterpat} is a pattern as used for filename expansion.
+It is applied to the list of possible completions generated by the
+preceding options and arguments, and each completion matching
+@var{filterpat} is removed from the list.
+A leading @samp{!} in @var{filterpat} negates the pattern; in this
+case, any completion not matching @var{filterpat} is removed.
+@end table
+
+The return value is true unless an invalid option is supplied, an option
+other than @option{-p} or @option{-r} is supplied without a @var{name}
+argument, an attempt is made to remove a completion specification for
+a @var{name} for which no specification exists, or
+an error occurs adding a completion specification.
+
+@item compopt
+@btindex compopt
+@example
+@code{compopt} [-o @var{option}] [-DEI] [+o @var{option}] [@var{name}]
+@end example
+Modify completion options for each @var{name} according to the
+@var{option}s, or for the currently-executing completion if no @var{name}s
+are supplied.
+If no @var{option}s are given, display the completion options for each
+@var{name} or the current completion.
+The possible values of @var{option} are those valid for the @code{complete}
+builtin described above.
+The @option{-D} option indicates that other supplied options should
+apply to the ``default'' command completion; that is, completion attempted
+on a command for which no completion has previously been defined.
+The @option{-E} option indicates that other supplied options should
+apply to ``empty'' command completion; that is, completion attempted on a 
+blank line.
+The @option{-I} option indicates that other supplied options should
+apply to completion on the initial non-assignment word on the line, or after a
+command delimiter such as @samp{;} or @samp{|}, which is usually command
+name completion.
+
+If multiple options are supplied, the @option{-D} option takes precedence
+over @option{-E}, and both take precedence over @option{-I}
+
+The return value is true unless an invalid option is supplied, an attempt
+is made to modify the options for a @var{name} for which no completion
+specification exists, or an output error occurs.
+
+@end table
+
+@node A Programmable Completion Example
+@section A Programmable Completion Example
+
+The most common way to obtain additional completion functionality beyond
+the default actions @code{complete} and @code{compgen} provide is to use
+a shell function and bind it to a particular command using @code{complete -F}.
+
+The following function provides completions for the @code{cd} builtin.
+It is a reasonably good example of what shell functions must do when
+used for completion.  This function uses the word passed as @code{$2}
+to determine the directory name to complete.  You can also use the
+@code{COMP_WORDS} array variable; the current word is indexed by the
+@code{COMP_CWORD} variable.
+
+The function relies on the @code{complete} and @code{compgen} builtins
+to do much of the work, adding only the things that the Bash @code{cd}
+does beyond accepting basic directory names:
+tilde expansion (@pxref{Tilde Expansion}),
+searching directories in @var{$CDPATH}, which is described above
+(@pxref{Bourne Shell Builtins}),
+and basic support for the @code{cdable_vars} shell option
+(@pxref{The Shopt Builtin}).
+@code{_comp_cd} modifies the value of @var{IFS} so that it contains only
+a newline to accommodate file names containing spaces and tabs --
+@code{compgen} prints the possible completions it generates one per line.
+
+Possible completions go into the @var{COMPREPLY} array variable, one
+completion per array element.  The programmable completion system retrieves
+the completions from there when the function returns.
+
+@example
+# A completion function for the cd builtin
+# based on the cd completion function from the bash_completion package
+_comp_cd()
+@{
+    local IFS=$' \t\n'    # normalize IFS
+    local cur _skipdot _cdpath
+    local i j k
+
+    # Tilde expansion, which also expands tilde to full pathname
+    case "$2" in
+    \~*)    eval cur="$2" ;;
+    *)      cur=$2 ;;
+    esac
+
+    # no cdpath or absolute pathname -- straight directory completion
+    if [[ -z "$@{CDPATH:-@}" ]] || [[ "$cur" == @@(./*|../*|/*) ]]; then
+        # compgen prints paths one per line; could also use while loop
+        IFS=$'\n'
+        COMPREPLY=( $(compgen -d -- "$cur") )
+        IFS=$' \t\n'
+    # CDPATH+directories in the current directory if not in CDPATH
+    else
+        IFS=$'\n'
+        _skipdot=false
+        # preprocess CDPATH to convert null directory names to .
+        _cdpath=$@{CDPATH/#:/.:@}
+        _cdpath=$@{_cdpath//::/:.:@}
+        _cdpath=$@{_cdpath/%:/:.@}
+        for i in $@{_cdpath//:/$'\n'@}; do
+            if [[ $i -ef . ]]; then _skipdot=true; fi
+            k="$@{#COMPREPLY[@@]@}"
+            for j in $( compgen -d -- "$i/$cur" ); do
+                COMPREPLY[k++]=$@{j#$i/@}        # cut off directory
+            done
+        done
+        $_skipdot || COMPREPLY+=( $(compgen -d -- "$cur") )
+        IFS=$' \t\n'
+    fi
+
+    # variable names if appropriate shell option set and no completions
+    if shopt -q cdable_vars && [[ $@{#COMPREPLY[@@]@} -eq 0 ]]; then
+        COMPREPLY=( $(compgen -v -- "$cur") )
+    fi
+
+    return 0
+@}
+@end example
+
+We install the completion function using the @option{-F} option to
+@code{complete}:
+
+@example
+# Tell readline to quote appropriate and append slashes to directories;
+# use the bash default completion for other arguments
+complete -o filenames -o nospace -o bashdefault -F _comp_cd cd
+@end example
+
+@noindent
+Since we'd like Bash and Readline to take care of some
+of the other details for us, we use several other options to tell Bash
+and Readline what to do.  The @option{-o filenames} option tells Readline
+that the possible completions should be treated as filenames, and quoted
+appropriately.  That option will also cause Readline to append a slash to
+filenames it can determine are directories (which is why we might want to
+extend @code{_comp_cd} to append a slash if we're using directories found
+via @var{CDPATH}: Readline can't tell those completions are directories).
+The @option{-o nospace} option tells Readline to not append a space
+character to the directory name, in case we want to append to it.
+The @option{-o bashdefault} option brings in the rest of the "Bash default"
+completions -- possible completion that Bash adds to the default Readline
+set.  These include things like command name completion, variable completion
+for words beginning with @samp{$} or @samp{$@{}, completions containing pathname
+expansion patterns (@pxref{Filename Expansion}), and so on.
+
+Once installed using @code{complete}, @code{_comp_cd} will be called every
+time we attempt word completion for a @code{cd} command.
+
+Many more examples -- an extensive collection of completions for most of
+the common GNU, Unix, and Linux commands -- are available as part of the
+bash_completion project.  This is installed by default on many GNU/Linux
+distributions.  Originally written by Ian Macdonald, the project now lives
+at @url{https://github.com/scop/bash-completion/}.  There are ports for
+other systems such as Solaris and Mac OS X.
+
+An older version of the bash_completion package is distributed with bash
+in the @file{examples/complete} subdirectory.
+
+@end ifset
diff --git a/lib/readline/doc/rluserman.texi b/lib/readline/doc/rluserman.texi
new file mode 100644
index 0000000..6e8e848
--- /dev/null
+++ b/lib/readline/doc/rluserman.texi
@@ -0,0 +1,70 @@
+\input texinfo    @c -*-texinfo-*-
+@comment %**start of header (This is for running Texinfo on a region.)
+@setfilename rluserman.info
+@settitle GNU Readline Library
+@include version.texi
+
+@comment %**end of header (This is for running Texinfo on a region.)
+
+@copying
+This manual describes the end user interface of the GNU Readline Library
+(version @value{VERSION}, @value{UPDATED}), a library which aids in the
+consistency of user interface across discrete programs which provide
+a command line interface.
+
+Copyright @copyright{} 1988--2020 Free Software Foundation, Inc.
+
+@quotation
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.3 or
+any later version published by the Free Software Foundation; with no
+Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.
+A copy of the license is included in the section entitled
+``GNU Free Documentation License''.
+
+@end quotation
+@end copying
+
+@dircategory Libraries
+@direntry
+* RLuserman: (rluserman).       The GNU readline library User's Manual.
+@end direntry
+
+@titlepage
+@title GNU Readline Library User Interface
+@subtitle Edition @value{EDITION}, for @code{Readline Library} Version @value{VERSION}.
+@subtitle @value{UPDATED-MONTH}
+@author Chet Ramey, Case Western Reserve University
+@author Brian Fox, Free Software Foundation
+
+@page
+@vskip 0pt plus 1filll
+@insertcopying
+
+@end titlepage
+
+@contents
+
+@ifnottex
+@node Top
+@top GNU Readline Library
+
+This document describes the end user interface of the GNU Readline Library,
+a utility which aids in the consistency of user interface across discrete
+programs which provide a command line interface.
+The Readline home page is @url{http://www.gnu.org/software/readline/}.
+
+@menu
+* Command Line Editing::	   GNU Readline User's Manual.
+* GNU Free Documentation License::	License for copying this manual.
+@end menu
+@end ifnottex
+
+@include rluser.texi
+
+@node GNU Free Documentation License
+@appendix GNU Free Documentation License
+
+@include fdl.texi
+
+@bye
diff --git a/lib/readline/doc/version.texi b/lib/readline/doc/version.texi
new file mode 100644
index 0000000..abb9cb6
--- /dev/null
+++ b/lib/readline/doc/version.texi
@@ -0,0 +1,10 @@
+@ignore
+Copyright (C) 1988-2020 Free Software Foundation, Inc. 
+@end ignore
+
+@set EDITION 8.1
+@set VERSION 8.1
+@set UPDATED 29 October 2020
+@set UPDATED-MONTH October 2020
+
+@set LASTCHANGE Thu Oct 29 16:49:01 EDT 2020
diff --git a/lib/readline/emacs_keymap.c b/lib/readline/emacs_keymap.c
new file mode 100644
index 0000000..02597da
--- /dev/null
+++ b/lib/readline/emacs_keymap.c
@@ -0,0 +1,872 @@
+/* emacs_keymap.c -- the keymap for emacs_mode in readline (). */
+
+/* Copyright (C) 1987-2017 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (BUFSIZ)
+#include <stdio.h>
+#endif /* !BUFSIZ */
+
+#include "readline.h"
+
+/* An array of function pointers, one for each possible key.
+   If the type byte is ISKMAP, then the pointer is the address of
+   a keymap. */
+
+KEYMAP_ENTRY_ARRAY emacs_standard_keymap = {
+
+  /* Control keys. */
+  { ISFUNC, rl_set_mark },			/* Control-@ */
+  { ISFUNC, rl_beg_of_line },			/* Control-a */
+  { ISFUNC, rl_backward_char },			/* Control-b */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-c */
+  { ISFUNC, rl_delete },			/* Control-d */
+  { ISFUNC, rl_end_of_line },			/* Control-e */
+  { ISFUNC, rl_forward_char },			/* Control-f */
+  { ISFUNC, rl_abort },				/* Control-g */
+  { ISFUNC, rl_rubout },			/* Control-h */
+  { ISFUNC, rl_complete },			/* Control-i */
+  { ISFUNC, rl_newline },			/* Control-j */
+  { ISFUNC, rl_kill_line },			/* Control-k */
+  { ISFUNC, rl_clear_screen },			/* Control-l */
+  { ISFUNC, rl_newline },			/* Control-m */
+  { ISFUNC, rl_get_next_history },		/* Control-n */
+  { ISFUNC, rl_operate_and_get_next },		/* Control-o */
+  { ISFUNC, rl_get_previous_history },		/* Control-p */
+  { ISFUNC, rl_quoted_insert },			/* Control-q */
+  { ISFUNC, rl_reverse_search_history },	/* Control-r */
+  { ISFUNC, rl_forward_search_history },	/* Control-s */
+  { ISFUNC, rl_transpose_chars },		/* Control-t */
+  { ISFUNC, rl_unix_line_discard },		/* Control-u */
+  { ISFUNC, rl_quoted_insert },			/* Control-v */
+  { ISFUNC, rl_unix_word_rubout },		/* Control-w */
+  { ISKMAP, (rl_command_func_t *)emacs_ctlx_keymap },	/* Control-x */
+  { ISFUNC, rl_yank },				/* Control-y */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-z */
+  { ISKMAP, (rl_command_func_t *)emacs_meta_keymap }, /* Control-[ */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-\ */
+  { ISFUNC, rl_char_search },			/* Control-] */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-^ */
+  { ISFUNC, rl_undo_command },			/* Control-_ */
+
+  /* The start of printing characters. */
+  { ISFUNC, rl_insert },		/* SPACE */
+  { ISFUNC, rl_insert },		/* ! */
+  { ISFUNC, rl_insert },		/* " */
+  { ISFUNC, rl_insert },		/* # */
+  { ISFUNC, rl_insert },		/* $ */
+  { ISFUNC, rl_insert },		/* % */
+  { ISFUNC, rl_insert },		/* & */
+  { ISFUNC, rl_insert },		/* ' */
+  { ISFUNC, rl_insert },		/* ( */
+  { ISFUNC, rl_insert },		/* ) */
+  { ISFUNC, rl_insert },		/* * */
+  { ISFUNC, rl_insert },		/* + */
+  { ISFUNC, rl_insert },		/* , */
+  { ISFUNC, rl_insert },		/* - */
+  { ISFUNC, rl_insert },		/* . */
+  { ISFUNC, rl_insert },		/* / */
+	
+	  /* Regular digits. */
+  { ISFUNC, rl_insert },		/* 0 */
+  { ISFUNC, rl_insert },		/* 1 */
+  { ISFUNC, rl_insert },		/* 2 */
+  { ISFUNC, rl_insert },		/* 3 */
+  { ISFUNC, rl_insert },		/* 4 */
+  { ISFUNC, rl_insert },		/* 5 */
+  { ISFUNC, rl_insert },		/* 6 */
+  { ISFUNC, rl_insert },		/* 7 */
+  { ISFUNC, rl_insert },		/* 8 */
+  { ISFUNC, rl_insert },		/* 9 */
+
+  /* A little more punctuation. */
+  { ISFUNC, rl_insert },		/* : */
+  { ISFUNC, rl_insert },		/* ; */
+  { ISFUNC, rl_insert },		/* < */
+  { ISFUNC, rl_insert },		/* = */
+  { ISFUNC, rl_insert },		/* > */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* @ */
+
+  /* Uppercase alphabet. */
+  { ISFUNC, rl_insert },		/* A */
+  { ISFUNC, rl_insert },		/* B */
+  { ISFUNC, rl_insert },		/* C */
+  { ISFUNC, rl_insert },		/* D */
+  { ISFUNC, rl_insert },		/* E */
+  { ISFUNC, rl_insert },		/* F */
+  { ISFUNC, rl_insert },		/* G */
+  { ISFUNC, rl_insert },		/* H */
+  { ISFUNC, rl_insert },		/* I */
+  { ISFUNC, rl_insert },		/* J */
+  { ISFUNC, rl_insert },		/* K */
+  { ISFUNC, rl_insert },		/* L */
+  { ISFUNC, rl_insert },		/* M */
+  { ISFUNC, rl_insert },		/* N */
+  { ISFUNC, rl_insert },		/* O */
+  { ISFUNC, rl_insert },		/* P */
+  { ISFUNC, rl_insert },		/* Q */
+  { ISFUNC, rl_insert },		/* R */
+  { ISFUNC, rl_insert },		/* S */
+  { ISFUNC, rl_insert },		/* T */
+  { ISFUNC, rl_insert },		/* U */
+  { ISFUNC, rl_insert },		/* V */
+  { ISFUNC, rl_insert },		/* W */
+  { ISFUNC, rl_insert },		/* X */
+  { ISFUNC, rl_insert },		/* Y */
+  { ISFUNC, rl_insert },		/* Z */
+
+  /* Some more punctuation. */
+  { ISFUNC, rl_insert },		/* [ */
+  { ISFUNC, rl_insert },		/* \ */
+  { ISFUNC, rl_insert },		/* ] */
+  { ISFUNC, rl_insert },		/* ^ */
+  { ISFUNC, rl_insert },		/* _ */
+  { ISFUNC, rl_insert },		/* ` */
+
+  /* Lowercase alphabet. */
+  { ISFUNC, rl_insert },		/* a */
+  { ISFUNC, rl_insert },		/* b */
+  { ISFUNC, rl_insert },		/* c */
+  { ISFUNC, rl_insert },		/* d */
+  { ISFUNC, rl_insert },		/* e */
+  { ISFUNC, rl_insert },		/* f */
+  { ISFUNC, rl_insert },		/* g */
+  { ISFUNC, rl_insert },		/* h */
+  { ISFUNC, rl_insert },		/* i */
+  { ISFUNC, rl_insert },		/* j */
+  { ISFUNC, rl_insert },		/* k */
+  { ISFUNC, rl_insert },		/* l */
+  { ISFUNC, rl_insert },		/* m */
+  { ISFUNC, rl_insert },		/* n */
+  { ISFUNC, rl_insert },		/* o */
+  { ISFUNC, rl_insert },		/* p */
+  { ISFUNC, rl_insert },		/* q */
+  { ISFUNC, rl_insert },		/* r */
+  { ISFUNC, rl_insert },		/* s */
+  { ISFUNC, rl_insert },		/* t */
+  { ISFUNC, rl_insert },		/* u */
+  { ISFUNC, rl_insert },		/* v */
+  { ISFUNC, rl_insert },		/* w */
+  { ISFUNC, rl_insert },		/* x */
+  { ISFUNC, rl_insert },		/* y */
+  { ISFUNC, rl_insert },		/* z */
+
+  /* Final punctuation. */
+  { ISFUNC, rl_insert },		/* { */
+  { ISFUNC, rl_insert },		/* | */
+  { ISFUNC, rl_insert },		/* } */
+  { ISFUNC, rl_insert },		/* ~ */
+  { ISFUNC, rl_rubout },		/* RUBOUT */
+
+#if KEYMAP_SIZE > 128
+  /* Pure 8-bit characters (128 - 159).
+     These might be used in some
+     character sets. */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+  { ISFUNC, rl_insert },		/* ? */
+
+  /* ISO Latin-1 characters (160 - 255) */
+  { ISFUNC, rl_insert },	/* No-break space */
+  { ISFUNC, rl_insert },	/* Inverted exclamation mark */
+  { ISFUNC, rl_insert },	/* Cent sign */
+  { ISFUNC, rl_insert },	/* Pound sign */
+  { ISFUNC, rl_insert },	/* Currency sign */
+  { ISFUNC, rl_insert },	/* Yen sign */
+  { ISFUNC, rl_insert },	/* Broken bar */
+  { ISFUNC, rl_insert },	/* Section sign */
+  { ISFUNC, rl_insert },	/* Diaeresis */
+  { ISFUNC, rl_insert },	/* Copyright sign */
+  { ISFUNC, rl_insert },	/* Feminine ordinal indicator */
+  { ISFUNC, rl_insert },	/* Left pointing double angle quotation mark */
+  { ISFUNC, rl_insert },	/* Not sign */
+  { ISFUNC, rl_insert },	/* Soft hyphen */
+  { ISFUNC, rl_insert },	/* Registered sign */
+  { ISFUNC, rl_insert },	/* Macron */
+  { ISFUNC, rl_insert },	/* Degree sign */
+  { ISFUNC, rl_insert },	/* Plus-minus sign */
+  { ISFUNC, rl_insert },	/* Superscript two */
+  { ISFUNC, rl_insert },	/* Superscript three */
+  { ISFUNC, rl_insert },	/* Acute accent */
+  { ISFUNC, rl_insert },	/* Micro sign */
+  { ISFUNC, rl_insert },	/* Pilcrow sign */
+  { ISFUNC, rl_insert },	/* Middle dot */
+  { ISFUNC, rl_insert },	/* Cedilla */
+  { ISFUNC, rl_insert },	/* Superscript one */
+  { ISFUNC, rl_insert },	/* Masculine ordinal indicator */
+  { ISFUNC, rl_insert },	/* Right pointing double angle quotation mark */
+  { ISFUNC, rl_insert },	/* Vulgar fraction one quarter */
+  { ISFUNC, rl_insert },	/* Vulgar fraction one half */
+  { ISFUNC, rl_insert },	/* Vulgar fraction three quarters */
+  { ISFUNC, rl_insert },	/* Inverted questionk mark */
+  { ISFUNC, rl_insert },	/* Latin capital letter a with grave */
+  { ISFUNC, rl_insert },	/* Latin capital letter a with acute */
+  { ISFUNC, rl_insert },	/* Latin capital letter a with circumflex */
+  { ISFUNC, rl_insert },	/* Latin capital letter a with tilde */
+  { ISFUNC, rl_insert },	/* Latin capital letter a with diaeresis */
+  { ISFUNC, rl_insert },	/* Latin capital letter a with ring above */
+  { ISFUNC, rl_insert },	/* Latin capital letter ae */
+  { ISFUNC, rl_insert },	/* Latin capital letter c with cedilla */
+  { ISFUNC, rl_insert },	/* Latin capital letter e with grave */
+  { ISFUNC, rl_insert },	/* Latin capital letter e with acute */
+  { ISFUNC, rl_insert },	/* Latin capital letter e with circumflex */
+  { ISFUNC, rl_insert },	/* Latin capital letter e with diaeresis */
+  { ISFUNC, rl_insert },	/* Latin capital letter i with grave */
+  { ISFUNC, rl_insert },	/* Latin capital letter i with acute */
+  { ISFUNC, rl_insert },	/* Latin capital letter i with circumflex */
+  { ISFUNC, rl_insert },	/* Latin capital letter i with diaeresis */
+  { ISFUNC, rl_insert },	/* Latin capital letter eth (Icelandic) */
+  { ISFUNC, rl_insert },	/* Latin capital letter n with tilde */
+  { ISFUNC, rl_insert },	/* Latin capital letter o with grave */
+  { ISFUNC, rl_insert },	/* Latin capital letter o with acute */
+  { ISFUNC, rl_insert },	/* Latin capital letter o with circumflex */
+  { ISFUNC, rl_insert },	/* Latin capital letter o with tilde */
+  { ISFUNC, rl_insert },	/* Latin capital letter o with diaeresis */
+  { ISFUNC, rl_insert },	/* Multiplication sign */
+  { ISFUNC, rl_insert },	/* Latin capital letter o with stroke */
+  { ISFUNC, rl_insert },	/* Latin capital letter u with grave */
+  { ISFUNC, rl_insert },	/* Latin capital letter u with acute */
+  { ISFUNC, rl_insert },	/* Latin capital letter u with circumflex */
+  { ISFUNC, rl_insert },	/* Latin capital letter u with diaeresis */
+  { ISFUNC, rl_insert },	/* Latin capital letter Y with acute */
+  { ISFUNC, rl_insert },	/* Latin capital letter thorn (Icelandic) */
+  { ISFUNC, rl_insert },	/* Latin small letter sharp s (German) */
+  { ISFUNC, rl_insert },	/* Latin small letter a with grave */
+  { ISFUNC, rl_insert },	/* Latin small letter a with acute */
+  { ISFUNC, rl_insert },	/* Latin small letter a with circumflex */
+  { ISFUNC, rl_insert },	/* Latin small letter a with tilde */
+  { ISFUNC, rl_insert },	/* Latin small letter a with diaeresis */
+  { ISFUNC, rl_insert },	/* Latin small letter a with ring above */
+  { ISFUNC, rl_insert },	/* Latin small letter ae */
+  { ISFUNC, rl_insert },	/* Latin small letter c with cedilla */
+  { ISFUNC, rl_insert },	/* Latin small letter e with grave */
+  { ISFUNC, rl_insert },	/* Latin small letter e with acute */
+  { ISFUNC, rl_insert },	/* Latin small letter e with circumflex */
+  { ISFUNC, rl_insert },	/* Latin small letter e with diaeresis */
+  { ISFUNC, rl_insert },	/* Latin small letter i with grave */
+  { ISFUNC, rl_insert },	/* Latin small letter i with acute */
+  { ISFUNC, rl_insert },	/* Latin small letter i with circumflex */
+  { ISFUNC, rl_insert },	/* Latin small letter i with diaeresis */
+  { ISFUNC, rl_insert },	/* Latin small letter eth (Icelandic) */
+  { ISFUNC, rl_insert },	/* Latin small letter n with tilde */
+  { ISFUNC, rl_insert },	/* Latin small letter o with grave */
+  { ISFUNC, rl_insert },	/* Latin small letter o with acute */
+  { ISFUNC, rl_insert },	/* Latin small letter o with circumflex */
+  { ISFUNC, rl_insert },	/* Latin small letter o with tilde */
+  { ISFUNC, rl_insert },	/* Latin small letter o with diaeresis */
+  { ISFUNC, rl_insert },	/* Division sign */
+  { ISFUNC, rl_insert },	/* Latin small letter o with stroke */
+  { ISFUNC, rl_insert },	/* Latin small letter u with grave */
+  { ISFUNC, rl_insert },	/* Latin small letter u with acute */
+  { ISFUNC, rl_insert },	/* Latin small letter u with circumflex */
+  { ISFUNC, rl_insert },	/* Latin small letter u with diaeresis */
+  { ISFUNC, rl_insert },	/* Latin small letter y with acute */
+  { ISFUNC, rl_insert },	/* Latin small letter thorn (Icelandic) */
+  { ISFUNC, rl_insert }		/* Latin small letter y with diaeresis */
+#endif /* KEYMAP_SIZE > 128 */
+};
+
+KEYMAP_ENTRY_ARRAY emacs_meta_keymap = {
+
+  /* Meta keys.  Just like above, but the high bit is set. */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-Control-@ */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-Control-a */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-Control-b */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-Control-c */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-Control-d */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-Control-e */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-Control-f */
+  { ISFUNC, rl_abort },			/* Meta-Control-g */
+  { ISFUNC, rl_backward_kill_word },	/* Meta-Control-h */
+  { ISFUNC, rl_tab_insert },		/* Meta-Control-i */
+  { ISFUNC, rl_vi_editing_mode },	/* Meta-Control-j */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-Control-k */
+  { ISFUNC, rl_clear_display },		/* Meta-Control-l */
+  { ISFUNC, rl_vi_editing_mode }, 	/* Meta-Control-m */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-Control-n */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-Control-o */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-Control-p */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-Control-q */
+  { ISFUNC, rl_revert_line },		/* Meta-Control-r */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-Control-s */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-Control-t */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-Control-u */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-Control-v */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-Control-w */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-Control-x */
+  { ISFUNC, rl_yank_nth_arg },		/* Meta-Control-y */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-Control-z */
+
+  { ISFUNC, rl_complete },		/* Meta-Control-[ */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-Control-\ */
+  { ISFUNC, rl_backward_char_search },	/* Meta-Control-] */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-Control-^ */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-Control-_ */
+
+  /* The start of printing characters. */
+  { ISFUNC, rl_set_mark },		/* Meta-SPACE */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-! */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-" */
+  { ISFUNC, rl_insert_comment },	/* Meta-# */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-$ */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-% */
+  { ISFUNC, rl_tilde_expand },		/* Meta-& */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-' */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-( */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-) */
+  { ISFUNC, rl_insert_completions },	/* Meta-* */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-+ */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-, */
+  { ISFUNC, rl_digit_argument }, 	/* Meta-- */
+  { ISFUNC, rl_yank_last_arg},		/* Meta-. */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-/ */
+
+  /* Regular digits. */
+  { ISFUNC, rl_digit_argument }, 	/* Meta-0 */
+  { ISFUNC, rl_digit_argument }, 	/* Meta-1 */
+  { ISFUNC, rl_digit_argument }, 	/* Meta-2 */
+  { ISFUNC, rl_digit_argument }, 	/* Meta-3 */
+  { ISFUNC, rl_digit_argument }, 	/* Meta-4 */
+  { ISFUNC, rl_digit_argument }, 	/* Meta-5 */
+  { ISFUNC, rl_digit_argument }, 	/* Meta-6 */
+  { ISFUNC, rl_digit_argument }, 	/* Meta-7 */
+  { ISFUNC, rl_digit_argument }, 	/* Meta-8 */
+  { ISFUNC, rl_digit_argument }, 	/* Meta-9 */
+
+  /* A little more punctuation. */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-: */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-; */
+  { ISFUNC, rl_beginning_of_history },	/* Meta-< */
+  { ISFUNC, rl_possible_completions },	/* Meta-= */
+  { ISFUNC, rl_end_of_history },	/* Meta-> */
+  { ISFUNC, rl_possible_completions },	/* Meta-? */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-@ */
+
+  /* Uppercase alphabet. */
+  { ISFUNC, rl_do_lowercase_version },	/* Meta-A */
+  { ISFUNC, rl_do_lowercase_version },	/* Meta-B */
+  { ISFUNC, rl_do_lowercase_version },	/* Meta-C */
+  { ISFUNC, rl_do_lowercase_version },	/* Meta-D */
+  { ISFUNC, rl_do_lowercase_version },	/* Meta-E */
+  { ISFUNC, rl_do_lowercase_version },	/* Meta-F */
+  { ISFUNC, rl_do_lowercase_version },	/* Meta-G */
+  { ISFUNC, rl_do_lowercase_version },	/* Meta-H */
+  { ISFUNC, rl_do_lowercase_version },	/* Meta-I */
+  { ISFUNC, rl_do_lowercase_version },	/* Meta-J */
+  { ISFUNC, rl_do_lowercase_version },	/* Meta-K */
+  { ISFUNC, rl_do_lowercase_version },	/* Meta-L */
+  { ISFUNC, rl_do_lowercase_version },	/* Meta-M */
+  { ISFUNC, rl_do_lowercase_version },	/* Meta-N */
+  { ISFUNC, rl_do_lowercase_version },	/* Meta-O */
+  { ISFUNC, rl_do_lowercase_version },	/* Meta-P */
+  { ISFUNC, rl_do_lowercase_version },	/* Meta-Q */
+  { ISFUNC, rl_do_lowercase_version },	/* Meta-R */
+  { ISFUNC, rl_do_lowercase_version },	/* Meta-S */
+  { ISFUNC, rl_do_lowercase_version },	/* Meta-T */
+  { ISFUNC, rl_do_lowercase_version },	/* Meta-U */
+  { ISFUNC, rl_do_lowercase_version },	/* Meta-V */
+  { ISFUNC, rl_do_lowercase_version },	/* Meta-W */
+  { ISFUNC, rl_do_lowercase_version },	/* Meta-X */
+  { ISFUNC, rl_do_lowercase_version },	/* Meta-Y */
+  { ISFUNC, rl_do_lowercase_version },	/* Meta-Z */
+
+  /* Some more punctuation. */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Meta-[ */	/* was rl_arrow_keys */
+  { ISFUNC, rl_delete_horizontal_space },	/* Meta-\ */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Meta-] */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Meta-^ */
+  { ISFUNC, rl_yank_last_arg },			/* Meta-_ */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Meta-` */
+
+  /* Lowercase alphabet. */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-a */
+  { ISFUNC, rl_backward_word },		/* Meta-b */
+  { ISFUNC, rl_capitalize_word }, 	/* Meta-c */
+  { ISFUNC, rl_kill_word },		/* Meta-d */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-e */
+  { ISFUNC, rl_forward_word },		/* Meta-f */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-g */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-h */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-i */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-j */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-k */
+  { ISFUNC, rl_downcase_word },		/* Meta-l */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-m */
+  { ISFUNC, rl_noninc_forward_search },	/* Meta-n */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-o */	/* was rl_arrow_keys */
+  { ISFUNC, rl_noninc_reverse_search },	/* Meta-p */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-q */
+  { ISFUNC, rl_revert_line },		/* Meta-r */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-s */
+  { ISFUNC, rl_transpose_words }, 	/* Meta-t */
+  { ISFUNC, rl_upcase_word },		/* Meta-u */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-v */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-w */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-x */
+  { ISFUNC, rl_yank_pop },		/* Meta-y */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-z */
+
+  /* Final punctuation. */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-{ */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-| */
+  { ISFUNC, (rl_command_func_t *)0x0 },	/* Meta-} */
+  { ISFUNC, rl_tilde_expand },		/* Meta-~ */
+  { ISFUNC, rl_backward_kill_word },	/* Meta-rubout */
+
+#if KEYMAP_SIZE > 128
+  /* Undefined keys. */
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 }
+#endif /* KEYMAP_SIZE > 128 */
+};
+
+KEYMAP_ENTRY_ARRAY emacs_ctlx_keymap = {
+
+  /* Control keys. */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-@ */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-a */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-b */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-c */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-d */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-e */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-f */
+  { ISFUNC, rl_abort },				/* Control-g */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-h */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-i */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-j */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-k */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-l */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-m */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-n */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-o */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-p */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-q */
+  { ISFUNC, rl_re_read_init_file },		/* Control-r */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-s */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-t */
+  { ISFUNC, rl_undo_command },			/* Control-u */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-v */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-w */
+  { ISFUNC, rl_exchange_point_and_mark },	/* Control-x */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-y */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-z */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-[ */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-\ */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-] */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-^ */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-_ */
+
+  /* The start of printing characters. */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* SPACE */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* ! */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* " */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* # */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* $ */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* % */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* & */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* ' */
+  { ISFUNC, rl_start_kbd_macro },		/* ( */
+  { ISFUNC, rl_end_kbd_macro  },		/* ) */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* * */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* + */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* , */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* - */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* . */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* / */
+
+  /* Regular digits. */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* 0 */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* 1 */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* 2 */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* 3 */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* 4 */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* 5 */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* 6 */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* 7 */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* 8 */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* 9 */
+
+  /* A little more punctuation. */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* : */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* ; */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* < */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* = */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* > */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* ? */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* @ */
+
+  /* Uppercase alphabet. */
+  { ISFUNC, rl_do_lowercase_version },		/* A */
+  { ISFUNC, rl_do_lowercase_version },		/* B */
+  { ISFUNC, rl_do_lowercase_version },		/* C */
+  { ISFUNC, rl_do_lowercase_version },		/* D */
+  { ISFUNC, rl_do_lowercase_version },		/* E */
+  { ISFUNC, rl_do_lowercase_version },		/* F */
+  { ISFUNC, rl_do_lowercase_version },		/* G */
+  { ISFUNC, rl_do_lowercase_version },		/* H */
+  { ISFUNC, rl_do_lowercase_version },		/* I */
+  { ISFUNC, rl_do_lowercase_version },		/* J */
+  { ISFUNC, rl_do_lowercase_version },		/* K */
+  { ISFUNC, rl_do_lowercase_version },		/* L */
+  { ISFUNC, rl_do_lowercase_version },		/* M */
+  { ISFUNC, rl_do_lowercase_version },		/* N */
+  { ISFUNC, rl_do_lowercase_version },		/* O */
+  { ISFUNC, rl_do_lowercase_version },		/* P */
+  { ISFUNC, rl_do_lowercase_version },		/* Q */
+  { ISFUNC, rl_do_lowercase_version },		/* R */
+  { ISFUNC, rl_do_lowercase_version },		/* S */
+  { ISFUNC, rl_do_lowercase_version },		/* T */
+  { ISFUNC, rl_do_lowercase_version },		/* U */
+  { ISFUNC, rl_do_lowercase_version },		/* V */
+  { ISFUNC, rl_do_lowercase_version },		/* W */
+  { ISFUNC, rl_do_lowercase_version },		/* X */
+  { ISFUNC, rl_do_lowercase_version },		/* Y */
+  { ISFUNC, rl_do_lowercase_version },		/* Z */
+
+  /* Some more punctuation. */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* [ */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* \ */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* ] */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* ^ */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* _ */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* ` */
+
+  /* Lowercase alphabet. */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* a */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* b */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* c */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* d */
+  { ISFUNC, rl_call_last_kbd_macro },		/* e */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* f */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* g */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* h */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* i */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* j */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* k */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* l */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* m */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* n */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* o */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* p */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* q */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* r */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* s */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* t */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* u */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* v */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* w */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* x */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* y */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* z */
+
+  /* Final punctuation. */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* { */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* | */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* } */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* ~ */
+  { ISFUNC, rl_backward_kill_line },		/* RUBOUT */
+
+#if KEYMAP_SIZE > 128
+  /* Undefined keys. */
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 }
+#endif /* KEYMAP_SIZE > 128 */
+};
diff --git a/lib/readline/examples/Inputrc b/lib/readline/examples/Inputrc
new file mode 100644
index 0000000..a358bc4
--- /dev/null
+++ b/lib/readline/examples/Inputrc
@@ -0,0 +1,81 @@
+# My ~/.inputrc file is in -*- text -*- for easy editing with Emacs.
+#
+# Notice the various bindings which are conditionalized depending
+# on which program is running, or what terminal is active.
+#
+
+#   Copyright (C) 1989-2009 Free Software Foundation, Inc.
+#
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+# In all programs, all terminals, make sure this is bound.
+"\C-x\C-r": re-read-init-file
+
+# Hp terminals (and some others) have ugly default behaviour for C-h.
+"\C-h": backward-delete-char
+"\e\C-h": backward-kill-word
+"\C-xd": dump-functions
+
+# In xterm windows, make the arrow keys do the right thing.
+$if TERM=xterm
+"\e[A": previous-history
+"\e[B": next-history
+"\e[C": forward-char
+"\e[D": backward-char
+
+# alternate arrow key prefix
+"\eOA": previous-history
+"\eOB": next-history
+"\eOC": forward-char
+"\eOD": backward-char
+
+# Under Xterm in Bash, we bind local Function keys to do something useful.
+$if Bash
+"\e[11~": "Function Key 1"
+"\e[12~": "Function Key 2"
+"\e[13~": "Function Key 3"
+"\e[14~": "Function Key 4"
+"\e[15~": "Function Key 5"
+
+# I know the following escape sequence numbers are 1 greater than
+# the function key.  Don't ask me why, I didn't design the xterm terminal.
+"\e[17~": "Function Key 6"
+"\e[18~": "Function Key 7"
+"\e[19~": "Function Key 8"
+"\e[20~": "Function Key 9"
+"\e[21~": "Function Key 10"
+$endif
+$endif
+
+# For Bash, all terminals, add some Bash specific hacks.
+$if Bash
+"\C-xv": show-bash-version
+"\C-x\C-e": shell-expand-line
+
+# Here is one for editing my path.
+"\C-xp": "$PATH\C-x\C-e\C-e\"\C-aPATH=\":\C-b"
+
+# Make C-x r read my mail in emacs.
+# "\C-xr": "emacs -f rmail\C-j"
+$endif
+
+# For FTP, different hacks:
+$if Ftp
+"\C-xg": "get \M-?"
+"\C-xt": "put \M-?"
+"\M-.": yank-last-arg
+$endif
+
+" ": self-insert
diff --git a/lib/readline/examples/Makefile b/lib/readline/examples/Makefile
new file mode 100644
index 0000000..2df2240
--- /dev/null
+++ b/lib/readline/examples/Makefile
@@ -0,0 +1,44 @@
+# This is the Makefile for the examples subdirectory of readline. -*- text -*-
+#
+# Copyright (C) 1994 Free Software Foundation, Inc.
+
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+EXECUTABLES = fileman rltest rl
+CFLAGS  = -g -I../.. -I.. -DREADLINE_LIBRARY
+LDFLAGS = -g -L..
+
+.c.o:
+	$(CC) $(CFLAGS) -c $<
+
+all: $(EXECUTABLES)
+
+
+rl: rl.o
+	$(CC) $(LDFLAGS) -o $@ rl.o -lreadline -ltermcap
+
+fileman: fileman.o
+	$(CC) $(LDFLAGS) -o $@ fileman.o -lreadline -ltermcap
+
+rltest: rltest.o
+	$(CC) $(LDFLAGS) -o $@ rltest.o -lreadline -ltermcap
+
+rlcat: rlcat.o
+	$(CC) $(LDFLAGS) -o $@ rlcat.o -lreadline -ltermcap
+
+fileman.o: fileman.c
+rltest.o: rltest.c
+rl.o: rl.c
+rlcat.o: rlcat.c
diff --git a/lib/readline/examples/excallback.c b/lib/readline/examples/excallback.c
new file mode 100644
index 0000000..4206acf
--- /dev/null
+++ b/lib/readline/examples/excallback.c
@@ -0,0 +1,196 @@
+/*
+From: Jeff Solomon <jsolomon@stanford.edu>
+Date: Fri,  9 Apr 1999 10:13:27 -0700 (PDT)
+To: chet@po.cwru.edu
+Subject: new readline example
+Message-ID: <14094.12094.527305.199695@mrclean.Stanford.EDU>
+
+Chet,
+
+I've been using readline 4.0. Specifically, I've been using the perl
+version Term::ReadLine::Gnu. It works great.
+
+Anyway, I've been playing around the alternate interface and I wanted
+to contribute a little C program, callback.c, to you that you could
+use as an example of the alternate interface in the /examples
+directory of the readline distribution.
+
+My example shows how, using the alternate interface, you can
+interactively change the prompt (which is very nice imo). Also, I
+point out that you must roll your own terminal setting when using the
+alternate interface because readline depreps (using your parlance) the
+terminal while in the user callback. I try to demostrate what I mean
+with an example. I've included the program below.
+
+To compile, I just put the program in the examples directory and made
+the appropriate changes to the EXECUTABLES and OBJECTS line and added
+an additional target 'callback'.
+
+I compiled on my Sun Solaris2.6 box using Sun's cc.
+
+Let me know what you think.
+
+Jeff
+*/
+/*
+Copyright (C) 1999 Jeff Solomon
+*/
+
+#if defined (HAVE_CONFIG_H)
+#include <config.h>
+#endif
+
+#include <sys/types.h>
+
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#include <stdlib.h>
+
+#include <stdio.h>
+#include <termios.h>	/* xxx - should make this more general */
+
+#ifdef READLINE_LIBRARY
+#  include "readline.h"
+#else
+#  include <readline/readline.h>
+#endif
+
+#ifndef STDIN_FILENO
+#  define STDIN_FILENO 0
+#endif
+
+/* This little examples demonstrates the alternate interface to using readline.
+ * In the alternate interface, the user maintains control over program flow and
+ * only calls readline when STDIN is readable. Using the alternate interface,
+ * you can do anything else while still using readline (like talking to a
+ * network or another program) without blocking.
+ *
+ * Specifically, this program highlights two importants features of the
+ * alternate interface. The first is the ability to interactively change the
+ * prompt, which can't be done using the regular interface since rl_prompt is
+ * read-only.
+ * 
+ * The second feature really highlights a subtle point when using the alternate
+ * interface. That is, readline will not alter the terminal when inside your
+ * callback handler. So let's so, your callback executes a user command that
+ * takes a non-trivial amount of time to complete (seconds). While your
+ * executing the command, the user continues to type keystrokes and expects them
+ * to be re-echoed on the new prompt when it returns. Unfortunately, the default
+ * terminal configuration doesn't do this. After the prompt returns, the user
+ * must hit one additional keystroke and then will see all of his previous
+ * keystrokes. To illustrate this, compile and run this program. Type "sleep" at
+ * the prompt and then type "bar" before the prompt returns (you have 3
+ * seconds). Notice how "bar" is re-echoed on the prompt after the prompt
+ * returns? This is what you expect to happen. Now comment out the 4 lines below
+ * the line that says COMMENT LINE BELOW. Recompile and rerun the program and do
+ * the same thing. When the prompt returns, you should not see "bar". Now type
+ * "f", see how "barf" magically appears? This behavior is un-expected and not
+ * desired.
+ */
+
+void process_line(char *line);
+int  change_prompt(void);
+char *get_prompt(void);
+
+int prompt = 1;
+char prompt_buf[40], line_buf[256];
+tcflag_t old_lflag;
+cc_t     old_vtime;
+struct termios term;
+
+int 
+main()
+{
+    fd_set fds;
+
+    /* Adjust the terminal slightly before the handler is installed. Disable
+     * canonical mode processing and set the input character time flag to be
+     * non-blocking.
+     */
+    if( tcgetattr(STDIN_FILENO, &term) < 0 ) {
+        perror("tcgetattr");
+        exit(1);
+    }
+    old_lflag = term.c_lflag;
+    old_vtime = term.c_cc[VTIME];
+    term.c_lflag &= ~ICANON;
+    term.c_cc[VTIME] = 1;
+    /* COMMENT LINE BELOW - see above */
+    if( tcsetattr(STDIN_FILENO, TCSANOW, &term) < 0 ) {
+        perror("tcsetattr");
+        exit(1);
+    }
+
+    rl_add_defun("change-prompt", change_prompt, CTRL('t'));
+    rl_callback_handler_install(get_prompt(), process_line);
+
+    while(1) {
+      FD_ZERO(&fds);
+      FD_SET(fileno(stdin), &fds);
+
+      if( select(FD_SETSIZE, &fds, NULL, NULL, NULL) < 0) {
+        perror("select");
+        exit(1);
+      }
+
+      if( FD_ISSET(fileno(stdin), &fds) ) {
+        rl_callback_read_char();
+      }
+    }
+}
+
+void
+process_line(char *line)
+{
+  if( line == NULL ) {
+    fprintf(stderr, "\n", line);
+
+    /* reset the old terminal setting before exiting */
+    term.c_lflag     = old_lflag;
+    term.c_cc[VTIME] = old_vtime;
+    if( tcsetattr(STDIN_FILENO, TCSANOW, &term) < 0 ) {
+        perror("tcsetattr");
+        exit(1);
+    }
+    exit(0);
+  }
+
+  if( strcmp(line, "sleep") == 0 ) {
+    sleep(3);
+  } else {
+    fprintf(stderr, "|%s|\n", line);
+  }
+
+  free (line);
+}
+
+int
+change_prompt(void)
+{
+  /* toggle the prompt variable */
+  prompt = !prompt;
+
+  /* save away the current contents of the line */
+  strcpy(line_buf, rl_line_buffer);
+
+  /* install a new handler which will change the prompt and erase the current line */
+  rl_callback_handler_install(get_prompt(), process_line);
+
+  /* insert the old text on the new line */
+  rl_insert_text(line_buf);
+
+  /* redraw the current line - this is an undocumented function. It invokes the
+   * redraw-current-line command.
+   */
+  rl_refresh_line(0, 0);
+}
+
+char *
+get_prompt(void)
+{
+  /* The prompts can even be different lengths! */
+  sprintf(prompt_buf, "%s", 
+    prompt ? "Hit ctrl-t to toggle prompt> " : "Pretty cool huh?> ");
+  return prompt_buf;
+}
diff --git a/lib/readline/examples/fileman.c b/lib/readline/examples/fileman.c
new file mode 100644
index 0000000..2a8b097
--- /dev/null
+++ b/lib/readline/examples/fileman.c
@@ -0,0 +1,506 @@
+/* fileman.c - file manager example for readline library. */
+
+/* Copyright (C) 1987-2009 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library for
+   reading lines of text with interactive input and history editing.
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* fileman.c -- A tiny application which demonstrates how to use the
+   GNU Readline library.  This application interactively allows users
+   to manipulate files and their modes. */
+
+#ifdef HAVE_CONFIG_H
+#  include <config.h>
+#endif
+
+#include <sys/types.h>
+#ifdef HAVE_SYS_FILE_H
+#  include <sys/file.h>
+#endif
+#include <sys/stat.h>
+
+#ifdef HAVE_UNISTD_H
+#  include <unistd.h>
+#endif
+
+#include <fcntl.h>
+#include <stdio.h>
+#include <errno.h>
+
+#if defined (HAVE_STRING_H)
+#  include <string.h>
+#else /* !HAVE_STRING_H */
+#  include <strings.h>
+#endif /* !HAVE_STRING_H */
+
+#ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+#endif
+
+#include <time.h>
+
+#ifdef READLINE_LIBRARY
+#  include "readline.h"
+#  include "history.h"
+#else
+#  include <readline/readline.h>
+#  include <readline/history.h>
+#endif
+
+extern char *xmalloc PARAMS((size_t));
+
+void initialize_readline PARAMS((void));
+void too_dangerous PARAMS((char *));
+
+int execute_line PARAMS((char *));
+int valid_argument PARAMS((char *, char *));
+
+/* The names of functions that actually do the manipulation. */
+int com_list PARAMS((char *));
+int com_view PARAMS((char *));
+int com_rename PARAMS((char *));
+int com_stat PARAMS((char *));
+int com_pwd PARAMS((char *));
+int com_delete PARAMS((char *));
+int com_help PARAMS((char *));
+int com_cd PARAMS((char *));
+int com_quit PARAMS((char *));
+
+/* A structure which contains information on the commands this program
+   can understand. */
+
+typedef struct {
+  char *name;			/* User printable name of the function. */
+  rl_icpfunc_t *func;		/* Function to call to do the job. */
+  char *doc;			/* Documentation for this function.  */
+} COMMAND;
+
+COMMAND commands[] = {
+  { "cd", com_cd, "Change to directory DIR" },
+  { "delete", com_delete, "Delete FILE" },
+  { "help", com_help, "Display this text" },
+  { "?", com_help, "Synonym for `help'" },
+  { "list", com_list, "List files in DIR" },
+  { "ls", com_list, "Synonym for `list'" },
+  { "pwd", com_pwd, "Print the current working directory" },
+  { "quit", com_quit, "Quit using Fileman" },
+  { "rename", com_rename, "Rename FILE to NEWNAME" },
+  { "stat", com_stat, "Print out statistics on FILE" },
+  { "view", com_view, "View the contents of FILE" },
+  { (char *)NULL, (rl_icpfunc_t *)NULL, (char *)NULL }
+};
+
+/* Forward declarations. */
+char *stripwhite ();
+COMMAND *find_command ();
+
+/* The name of this program, as taken from argv[0]. */
+char *progname;
+
+/* When non-zero, this global means the user is done using this program. */
+int done;
+
+char *
+dupstr (s)
+     char *s;
+{
+  char *r;
+
+  r = xmalloc (strlen (s) + 1);
+  strcpy (r, s);
+  return (r);
+}
+
+int
+main (argc, argv)
+     int argc;
+     char **argv;
+{
+  char *line, *s;
+
+  progname = argv[0];
+
+  initialize_readline ();	/* Bind our completer. */
+
+  /* Loop reading and executing lines until the user quits. */
+  for ( ; done == 0; )
+    {
+      line = readline ("FileMan: ");
+
+      if (!line)
+        break;
+
+      /* Remove leading and trailing whitespace from the line.
+         Then, if there is anything left, add it to the history list
+         and execute it. */
+      s = stripwhite (line);
+
+      if (*s)
+        {
+          add_history (s);
+          execute_line (s);
+        }
+
+      free (line);
+    }
+  exit (0);
+}
+
+/* Execute a command line. */
+int
+execute_line (line)
+     char *line;
+{
+  register int i;
+  COMMAND *command;
+  char *word;
+
+  /* Isolate the command word. */
+  i = 0;
+  while (line[i] && whitespace (line[i]))
+    i++;
+  word = line + i;
+
+  while (line[i] && !whitespace (line[i]))
+    i++;
+
+  if (line[i])
+    line[i++] = '\0';
+
+  command = find_command (word);
+
+  if (!command)
+    {
+      fprintf (stderr, "%s: No such command for FileMan.\n", word);
+      return (-1);
+    }
+
+  /* Get argument to command, if any. */
+  while (whitespace (line[i]))
+    i++;
+
+  word = line + i;
+
+  /* Call the function. */
+  return ((*(command->func)) (word));
+}
+
+/* Look up NAME as the name of a command, and return a pointer to that
+   command.  Return a NULL pointer if NAME isn't a command name. */
+COMMAND *
+find_command (name)
+     char *name;
+{
+  register int i;
+
+  for (i = 0; commands[i].name; i++)
+    if (strcmp (name, commands[i].name) == 0)
+      return (&commands[i]);
+
+  return ((COMMAND *)NULL);
+}
+
+/* Strip whitespace from the start and end of STRING.  Return a pointer
+   into STRING. */
+char *
+stripwhite (string)
+     char *string;
+{
+  register char *s, *t;
+
+  for (s = string; whitespace (*s); s++)
+    ;
+    
+  if (*s == 0)
+    return (s);
+
+  t = s + strlen (s) - 1;
+  while (t > s && whitespace (*t))
+    t--;
+  *++t = '\0';
+
+  return s;
+}
+
+/* **************************************************************** */
+/*                                                                  */
+/*                  Interface to Readline Completion                */
+/*                                                                  */
+/* **************************************************************** */
+
+char *command_generator PARAMS((const char *, int));
+char **fileman_completion PARAMS((const char *, int, int));
+
+/* Tell the GNU Readline library how to complete.  We want to try to complete
+   on command names if this is the first word in the line, or on filenames
+   if not. */
+void
+initialize_readline ()
+{
+  /* Allow conditional parsing of the ~/.inputrc file. */
+  rl_readline_name = "FileMan";
+
+  /* Tell the completer that we want a crack first. */
+  rl_attempted_completion_function = fileman_completion;
+}
+
+/* Attempt to complete on the contents of TEXT.  START and END bound the
+   region of rl_line_buffer that contains the word to complete.  TEXT is
+   the word to complete.  We can use the entire contents of rl_line_buffer
+   in case we want to do some simple parsing.  Return the array of matches,
+   or NULL if there aren't any. */
+char **
+fileman_completion (text, start, end)
+     const char *text;
+     int start, end;
+{
+  char **matches;
+
+  matches = (char **)NULL;
+
+  /* If this word is at the start of the line, then it is a command
+     to complete.  Otherwise it is the name of a file in the current
+     directory. */
+  if (start == 0)
+    matches = rl_completion_matches (text, command_generator);
+
+  return (matches);
+}
+
+/* Generator function for command completion.  STATE lets us know whether
+   to start from scratch; without any state (i.e. STATE == 0), then we
+   start at the top of the list. */
+char *
+command_generator (text, state)
+     const char *text;
+     int state;
+{
+  static int list_index, len;
+  char *name;
+
+  /* If this is a new word to complete, initialize now.  This includes
+     saving the length of TEXT for efficiency, and initializing the index
+     variable to 0. */
+  if (!state)
+    {
+      list_index = 0;
+      len = strlen (text);
+    }
+
+  /* Return the next name which partially matches from the command list. */
+  while (name = commands[list_index].name)
+    {
+      list_index++;
+
+      if (strncmp (name, text, len) == 0)
+        return (dupstr(name));
+    }
+
+  /* If no names matched, then return NULL. */
+  return ((char *)NULL);
+}
+
+/* **************************************************************** */
+/*                                                                  */
+/*                       FileMan Commands                           */
+/*                                                                  */
+/* **************************************************************** */
+
+/* String to pass to system ().  This is for the LIST, VIEW and RENAME
+   commands. */
+static char syscom[1024];
+
+/* List the file(s) named in arg. */
+int
+com_list (arg)
+     char *arg;
+{
+  if (!arg)
+    arg = "";
+
+  sprintf (syscom, "ls -FClg %s", arg);
+  return (system (syscom));
+}
+
+int
+com_view (arg)
+     char *arg;
+{
+  if (!valid_argument ("view", arg))
+    return 1;
+
+#if defined (__MSDOS__)
+  /* more.com doesn't grok slashes in pathnames */
+  sprintf (syscom, "less %s", arg);
+#else
+  sprintf (syscom, "more %s", arg);
+#endif
+  return (system (syscom));
+}
+
+int
+com_rename (arg)
+     char *arg;
+{
+  too_dangerous ("rename");
+  return (1);
+}
+
+int
+com_stat (arg)
+     char *arg;
+{
+  struct stat finfo;
+
+  if (!valid_argument ("stat", arg))
+    return (1);
+
+  if (stat (arg, &finfo) == -1)
+    {
+      perror (arg);
+      return (1);
+    }
+
+  printf ("Statistics for `%s':\n", arg);
+
+  printf ("%s has %d link%s, and is %lu byte%s in length.\n",
+	  arg,
+          finfo.st_nlink,
+          (finfo.st_nlink == 1) ? "" : "s",
+          (unsigned long)finfo.st_size,
+          (finfo.st_size == 1) ? "" : "s");
+  printf ("Inode Last Change at: %s", ctime (&finfo.st_ctime));
+  printf ("      Last access at: %s", ctime (&finfo.st_atime));
+  printf ("    Last modified at: %s", ctime (&finfo.st_mtime));
+  return (0);
+}
+
+int
+com_delete (arg)
+     char *arg;
+{
+  too_dangerous ("delete");
+  return (1);
+}
+
+/* Print out help for ARG, or for all of the commands if ARG is
+   not present. */
+int
+com_help (arg)
+     char *arg;
+{
+  register int i;
+  int printed = 0;
+
+  for (i = 0; commands[i].name; i++)
+    {
+      if (!*arg || (strcmp (arg, commands[i].name) == 0))
+        {
+          printf ("%s\t\t%s.\n", commands[i].name, commands[i].doc);
+          printed++;
+        }
+    }
+
+  if (!printed)
+    {
+      printf ("No commands match `%s'.  Possibilities are:\n", arg);
+
+      for (i = 0; commands[i].name; i++)
+        {
+          /* Print in six columns. */
+          if (printed == 6)
+            {
+              printed = 0;
+              printf ("\n");
+            }
+
+          printf ("%s\t", commands[i].name);
+          printed++;
+        }
+
+      if (printed)
+        printf ("\n");
+    }
+  return (0);
+}
+
+/* Change to the directory ARG. */
+int
+com_cd (arg)
+     char *arg;
+{
+  if (chdir (arg) == -1)
+    {
+      perror (arg);
+      return 1;
+    }
+
+  com_pwd ("");
+  return (0);
+}
+
+/* Print out the current working directory. */
+int
+com_pwd (ignore)
+     char *ignore;
+{
+  char dir[1024], *s;
+
+  s = getcwd (dir, sizeof(dir) - 1);
+  if (s == 0)
+    {
+      printf ("Error getting pwd: %s\n", dir);
+      return 1;
+    }
+
+  printf ("Current directory is %s\n", dir);
+  return 0;
+}
+
+/* The user wishes to quit using this program.  Just set DONE non-zero. */
+int
+com_quit (arg)
+     char *arg;
+{
+  done = 1;
+  return (0);
+}
+
+/* Function which tells you that you can't do this. */
+void
+too_dangerous (caller)
+     char *caller;
+{
+  fprintf (stderr,
+           "%s: Too dangerous for me to distribute.  Write it yourself.\n",
+           caller);
+}
+
+/* Return non-zero if ARG is a valid argument for CALLER, else print
+   an error message and return zero. */
+int
+valid_argument (caller, arg)
+     char *caller, *arg;
+{
+  if (!arg || !*arg)
+    {
+      fprintf (stderr, "%s: Argument required.\n", caller);
+      return (0);
+    }
+
+  return (1);
+}
diff --git a/lib/readline/examples/histexamp.c b/lib/readline/examples/histexamp.c
new file mode 100644
index 0000000..3b43674
--- /dev/null
+++ b/lib/readline/examples/histexamp.c
@@ -0,0 +1,125 @@
+/* histexamp.c - history library example program. */
+
+/* Copyright (C) 1987-2009 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library for
+   reading lines of text with interactive input and history editing.
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdio.h>
+
+#ifdef READLINE_LIBRARY
+#  include "history.h"
+#else
+#  include <readline/history.h>
+#endif
+
+#include <string.h>
+
+main (argc, argv)
+     int argc;
+     char **argv;
+{
+  char line[1024], *t;
+  int len, done;
+
+  line[0] = 0;
+  done = 0;
+
+  using_history ();
+  while (!done)
+    {
+      printf ("history$ ");
+      fflush (stdout);
+      t = fgets (line, sizeof (line) - 1, stdin);
+      if (t && *t)
+	{
+	  len = strlen (t);
+	  if (t[len - 1] == '\n')
+	    t[len - 1] = '\0';
+	}
+
+      if (!t)
+	strcpy (line, "quit");
+
+      if (line[0])
+	{
+	  char *expansion;
+	  int result;
+
+	  using_history ();
+
+	  result = history_expand (line, &expansion);
+	  if (result)
+	    fprintf (stderr, "%s\n", expansion);
+
+	  if (result < 0 || result == 2)
+	    {
+	      free (expansion);
+	      continue;
+	    }
+
+	  add_history (expansion);
+	  strncpy (line, expansion, sizeof (line) - 1);
+	  free (expansion);
+	}
+
+      if (strcmp (line, "quit") == 0)
+	done = 1;
+      else if (strcmp (line, "save") == 0)
+	write_history ("history_file");
+      else if (strcmp (line, "read") == 0)
+	read_history ("history_file");
+      else if (strcmp (line, "list") == 0)
+	{
+	  register HIST_ENTRY **the_list;
+	  register int i;
+	  time_t tt;
+	  char timestr[128];
+
+	  the_list = history_list ();
+	  if (the_list)
+	    for (i = 0; the_list[i]; i++)
+	      {
+	      	tt = history_get_time (the_list[i]);
+		if (tt)
+		  strftime (timestr, sizeof (timestr), "%a %R", localtime(&tt));
+		else
+		  strcpy (timestr, "??");
+	        printf ("%d: %s: %s\n", i + history_base, timestr, the_list[i]->line);
+	      }
+	}
+      else if (strncmp (line, "delete", 6) == 0)
+	{
+	  int which;
+	  if ((sscanf (line + 6, "%d", &which)) == 1)
+	    {
+	      HIST_ENTRY *entry = remove_history (which);
+	      if (!entry)
+		fprintf (stderr, "No such entry %d\n", which);
+	      else
+		{
+		  free (entry->line);
+		  free (entry);
+		}
+	    }
+	  else
+	    {
+	      fprintf (stderr, "non-numeric arg given to `delete'\n");
+	    }
+	}
+    }
+}
diff --git a/lib/readline/examples/manexamp.c b/lib/readline/examples/manexamp.c
new file mode 100644
index 0000000..351c628
--- /dev/null
+++ b/lib/readline/examples/manexamp.c
@@ -0,0 +1,111 @@
+/* manexamp.c -- The examples which appear in the documentation are here. */
+
+/* Copyright (C) 1987-2009 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library for
+   reading lines of text with interactive input and history editing.
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdio.h>
+#include <readline/readline.h>
+
+/* **************************************************************** */
+/*                                                                  */
+/*   			How to Emulate gets ()			    */
+/*                                                                  */
+/* **************************************************************** */
+
+/* A static variable for holding the line. */
+static char *line_read = (char *)NULL;
+
+/* Read a string, and return a pointer to it.  Returns NULL on EOF. */
+char *
+rl_gets ()
+{
+  /* If the buffer has already been allocated, return the memory
+     to the free pool. */
+  if (line_read)
+    {
+      free (line_read);
+      line_read = (char *)NULL;
+    }
+
+  /* Get a line from the user. */
+  line_read = readline ("");
+
+  /* If the line has any text in it, save it on the history. */
+  if (line_read && *line_read)
+    add_history (line_read);
+
+  return (line_read);
+}
+
+/* **************************************************************** */
+/*                                                                  */
+/*        Writing a Function to be Called by Readline.              */
+/*                                                                  */
+/* **************************************************************** */
+
+/* Invert the case of the COUNT following characters. */
+invert_case_line (count, key)
+     int count, key;
+{
+  register int start, end;
+
+  start = rl_point;
+
+  if (count < 0)
+    {
+      direction = -1;
+      count = -count;
+    }
+  else
+    direction = 1;
+      
+  /* Find the end of the range to modify. */
+  end = start + (count * direction);
+
+  /* Force it to be within range. */
+  if (end > rl_end)
+    end = rl_end;
+  else if (end < 0)
+    end = -1;
+
+  if (start > end)
+    {
+      int temp = start;
+      start = end;
+      end = temp;
+    }
+
+  if (start == end)
+    return;
+
+  /* Tell readline that we are modifying the line, so save the undo
+     information. */
+  rl_modifying (start, end);
+
+  for (; start != end; start += direction)
+    {
+      if (_rl_uppercase_p (rl_line_buffer[start]))
+	rl_line_buffer[start] = _rl_to_lower (rl_line_buffer[start]);
+      else if (_rl_lowercase_p (rl_line_buffer[start]))
+	rl_line_buffer[start] = _rl_to_upper (rl_line_buffer[start]);
+    }
+
+  /* Move point to on top of the last character changed. */
+  rl_point = end - direction;
+}
diff --git a/lib/readline/examples/rl-callbacktest.c b/lib/readline/examples/rl-callbacktest.c
new file mode 100644
index 0000000..0f00e57
--- /dev/null
+++ b/lib/readline/examples/rl-callbacktest.c
@@ -0,0 +1,90 @@
+/* Standard include files. stdio.h is required. */
+#include <stdlib.h>
+#include <unistd.h>
+#include <string.h>
+
+/* Used for select(2) */
+#include <sys/types.h>
+#include <sys/select.h>
+
+#include <errno.h>
+#include <stdio.h>
+
+/* Standard readline include files. */
+#if defined (READLINE_LIBRARY)
+#  include "readline.h"
+#  include "history.h"
+#else
+#  include <readline/readline.h>
+#  include <readline/history.h>
+#endif
+
+extern int errno;
+
+static void cb_linehandler (char *);
+
+int running;
+const char *prompt = "rltest$ ";
+
+/* Callback function called for each line when accept-line executed, EOF
+   seen, or EOF character read.  This sets a flag and returns; it could
+   also call exit(3). */
+static void
+cb_linehandler (char *line)
+{
+  /* Can use ^D (stty eof) or `exit' to exit. */
+  if (line == NULL || strcmp (line, "exit") == 0)
+    {
+      if (line == 0)
+        printf ("\n");
+      printf ("exit\n");
+      /* This function needs to be called to reset the terminal settings,
+	 and calling it from the line handler keeps one extra prompt from
+	 being displayed. */
+      rl_callback_handler_remove ();
+
+      running = 0;
+    }
+  else
+    {
+      if (*line)
+	add_history (line);
+      printf ("input line: %s\n", line);
+      free (line);
+    }
+}
+
+int
+main (int c, char **v)
+{
+  fd_set fds;
+  int r;
+
+  /* Install the line handler. */
+  rl_callback_handler_install (prompt, cb_linehandler);
+
+  /* Enter a simple event loop.  This waits until something is available
+     to read on readline's input stream (defaults to standard input) and
+     calls the builtin character read callback to read it.  It does not
+     have to modify the user's terminal settings. */
+  running = 1;
+  while (running)
+    {
+      FD_ZERO (&fds);
+      FD_SET (fileno (rl_instream), &fds);    
+
+      r = select (FD_SETSIZE, &fds, NULL, NULL, NULL);
+      if (r < 0 && errno != EINTR)
+	{
+	  perror ("rltest: select");
+	  rl_callback_handler_remove ();
+	  break;
+	}
+
+      if (FD_ISSET (fileno (rl_instream), &fds))
+	rl_callback_read_char ();
+    }
+
+  printf ("rltest: Event loop has exited\n");
+  return 0;
+}
diff --git a/lib/readline/examples/rl.c b/lib/readline/examples/rl.c
new file mode 100644
index 0000000..a5cf276
--- /dev/null
+++ b/lib/readline/examples/rl.c
@@ -0,0 +1,158 @@
+/*
+ * rl - command-line interface to read a line from the standard input
+ *      (or another fd) using readline.
+ *
+ * usage: rl [-p prompt] [-u unit] [-d default] [-n nchars]
+ */
+
+/* Copyright (C) 1987-2009 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library for
+   reading lines of text with interactive input and history editing.
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <unistd.h>
+#include <stdio.h>
+#include <sys/types.h>
+
+#ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+#else 
+extern void exit();
+#endif
+
+#if defined (READLINE_LIBRARY)
+#  include "posixstat.h"
+#  include "readline.h"
+#  include "history.h"
+#else
+#  include <sys/stat.h>
+#  include <readline/readline.h>
+#  include <readline/history.h>
+#endif
+
+extern int optind;
+extern char *optarg;
+
+#if !defined (strchr) && !defined (__STDC__)
+extern char *strrchr();
+#endif
+
+static char *progname;
+static char *deftext;
+
+static int
+set_deftext ()
+{
+  if (deftext)
+    {
+      rl_insert_text (deftext);
+      deftext = (char *)NULL;
+      rl_startup_hook = (rl_hook_func_t *)NULL;
+    }
+  return 0;
+}
+
+static void
+usage()
+{
+  fprintf (stderr, "%s: usage: %s [-p prompt] [-u unit] [-d default] [-n nchars]\n",
+		progname, progname);
+}
+
+int
+main (argc, argv)
+     int argc;
+     char **argv;
+{
+  char *temp, *prompt;
+  struct stat sb;
+  int opt, fd, nch;
+  FILE *ifp;
+
+  progname = strrchr(argv[0], '/');
+  if (progname == 0)
+    progname = argv[0];
+  else
+    progname++;
+
+  /* defaults */
+  prompt = "readline$ ";
+  fd = nch = 0;
+  deftext = (char *)0;
+
+  while ((opt = getopt(argc, argv, "p:u:d:n:")) != EOF)
+    {
+      switch (opt)
+	{
+	case 'p':
+	  prompt = optarg;
+	  break;
+	case 'u':
+	  fd = atoi(optarg);
+	  if (fd < 0)
+	    {
+	      fprintf (stderr, "%s: bad file descriptor `%s'\n", progname, optarg);
+	      exit (2);
+	    }
+	  break;
+	case 'd':
+	  deftext = optarg;
+	  break;
+	case 'n':
+	  nch = atoi(optarg);
+	  if (nch < 0)
+	    {
+	      fprintf (stderr, "%s: bad value for -n: `%s'\n", progname, optarg);
+	      exit (2);
+	    }
+	  break;
+	default:
+	  usage ();
+	  exit (2);
+	}
+    }
+
+  if (fd != 0)
+    {
+      if (fstat (fd, &sb) < 0)
+	{
+	  fprintf (stderr, "%s: %d: bad file descriptor\n", progname, fd);
+	  exit (1);
+	}
+      ifp = fdopen (fd, "r");
+      rl_instream = ifp;
+    }
+
+  if (deftext && *deftext)
+    rl_startup_hook = set_deftext;
+
+  if (nch > 0)
+    rl_num_chars_to_read = nch;
+
+  temp = readline (prompt);
+
+  /* Test for EOF. */
+  if (temp == 0)
+    exit (1);
+
+  printf ("%s\n", temp);
+  exit (0);
+}
diff --git a/lib/readline/examples/rlcat.c b/lib/readline/examples/rlcat.c
new file mode 100644
index 0000000..b494241
--- /dev/null
+++ b/lib/readline/examples/rlcat.c
@@ -0,0 +1,179 @@
+/*
+ * rlcat - cat(1) using readline
+ *
+ * usage: rlcat
+ */
+
+/* Copyright (C) 1987-2009 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library for
+   reading lines of text with interactive input and history editing.
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#ifdef HAVE_UNISTD_H
+#  include <unistd.h>
+#endif
+
+#include <sys/types.h>
+#include "posixstat.h"
+
+#include <stdio.h>
+#include <ctype.h>
+#include <string.h>
+#include <errno.h>
+
+#ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+#else 
+extern void exit();
+#endif
+
+#ifndef errno
+extern int errno;
+#endif
+
+#if defined (READLINE_LIBRARY)
+#  include "readline.h"
+#  include "history.h"
+#else
+#  include <readline/readline.h>
+#  include <readline/history.h>
+#endif
+
+extern int optind;
+extern char *optarg;
+
+static int stdcat();
+
+static char *progname;
+static int vflag;
+
+static void
+usage()
+{
+  fprintf (stderr, "%s: usage: %s [-vEVN] [filename]\n", progname, progname);
+}
+
+int
+main (argc, argv)
+     int argc;
+     char **argv;
+{
+  char *temp;
+  int opt, Vflag, Nflag;
+
+  progname = strrchr(argv[0], '/');
+  if (progname == 0)
+    progname = argv[0];
+  else
+    progname++;
+
+  vflag = Vflag = Nflag = 0;
+  while ((opt = getopt(argc, argv, "vEVN")) != EOF)
+    {
+      switch (opt)
+	{
+	case 'v':
+	  vflag = 1;
+	  break;
+	case 'V':
+	  Vflag = 1;
+	  break;
+	case 'E':
+	  Vflag = 0;
+	  break;
+	case 'N':
+	  Nflag = 1;
+	  break;
+	default:
+	  usage ();
+	  exit (2);
+	}
+    }
+
+  argc -= optind;
+  argv += optind;
+
+  if (isatty(0) == 0 || argc || Nflag)
+    return stdcat(argc, argv);
+
+  rl_variable_bind ("editing-mode", Vflag ? "vi" : "emacs");
+  while (temp = readline (""))
+    {
+      if (*temp)
+        add_history (temp);
+      printf ("%s\n", temp);
+    }
+
+  return (ferror (stdout));
+}
+
+static int
+fcopy(fp)
+     FILE *fp;
+{
+  int c;
+  char *x;
+
+  while ((c = getc(fp)) != EOF)
+    {
+      if (vflag && isascii ((unsigned char)c) && isprint((unsigned char)c) == 0)
+	{
+	  x = rl_untranslate_keyseq (c);
+	  if (fputs (x, stdout) == EOF)
+	    return 1;
+	}
+      else if (putchar (c) == EOF)
+        return 1;
+    }
+  return (ferror (stdout));
+}
+
+int
+stdcat (argc, argv)
+     int argc;
+     char **argv;
+{
+  int  i, fd, r;
+  char *s;
+  FILE *fp;
+
+  if (argc == 0)
+    return (fcopy(stdin));
+
+  for (i = 0, r = 1; i < argc; i++)
+    {
+      if (*argv[i] == '-' && argv[i][1] == 0)
+	fp = stdin;
+      else
+	{
+	  fp = fopen (argv[i], "r");
+	  if (fp == 0)
+	    {
+	      fprintf (stderr, "%s: %s: cannot open: %s\n", progname, argv[i], strerror(errno));
+	      continue;
+	    }
+        }
+      r = fcopy (fp);
+      if (fp != stdin)
+	fclose(fp);
+    }
+  return r;
+}
diff --git a/lib/readline/examples/rltest.c b/lib/readline/examples/rltest.c
new file mode 100644
index 0000000..65abe87
--- /dev/null
+++ b/lib/readline/examples/rltest.c
@@ -0,0 +1,93 @@
+/* **************************************************************** */
+/*								    */
+/*			Testing Readline			    */
+/*								    */
+/* **************************************************************** */
+
+/* Copyright (C) 1987-2009 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library for
+   reading lines of text with interactive input and history editing.
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if defined (HAVE_CONFIG_H)
+#include <config.h>
+#endif
+
+#include <stdio.h>
+#include <sys/types.h>
+
+#ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+#else 
+extern void exit();
+#endif
+
+#ifdef READLINE_LIBRARY
+#  include "readline.h"
+#  include "history.h"
+#else
+#  include <readline/readline.h>
+#  include <readline/history.h>
+#endif
+
+extern HIST_ENTRY **history_list ();
+
+int
+main ()
+{
+  char *temp, *prompt;
+  int done;
+
+  temp = (char *)NULL;
+  prompt = "readline$ ";
+  done = 0;
+
+  while (!done)
+    {
+      temp = readline (prompt);
+
+      /* Test for EOF. */
+      if (!temp)
+	exit (1);
+
+      /* If there is anything on the line, print it and remember it. */
+      if (*temp)
+	{
+	  fprintf (stderr, "%s\r\n", temp);
+	  add_history (temp);
+	}
+
+      /* Check for `command' that we handle. */
+      if (strcmp (temp, "quit") == 0)
+	done = 1;
+
+      if (strcmp (temp, "list") == 0)
+	{
+	  HIST_ENTRY **list;
+	  register int i;
+
+	  list = history_list ();
+	  if (list)
+	    {
+	      for (i = 0; list[i]; i++)
+		fprintf (stderr, "%d: %s\r\n", i, list[i]->line);
+	    }
+	}
+      free (temp);
+    }
+  exit (0);
+}
diff --git a/lib/readline/funmap.c b/lib/readline/funmap.c
new file mode 100644
index 0000000..eca49a3
--- /dev/null
+++ b/lib/readline/funmap.c
@@ -0,0 +1,271 @@
+/* funmap.c -- attach names to functions. */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#if !defined (BUFSIZ)
+#include <stdio.h>
+#endif /* BUFSIZ */
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#include "rlconf.h"
+#include "readline.h"
+
+#include "xmalloc.h"
+
+#ifdef __STDC__
+typedef int QSFUNC (const void *, const void *);
+#else
+typedef int QSFUNC ();
+#endif
+
+extern int _rl_qsort_string_compare PARAMS((char **, char **));
+
+FUNMAP **funmap;
+static int funmap_size;
+static int funmap_entry;
+
+/* After initializing the function map, this is the index of the first
+   program specific function. */
+int funmap_program_specific_entry_start;
+
+static const FUNMAP default_funmap[] = {
+  { "abort", rl_abort },
+  { "accept-line", rl_newline },
+  { "arrow-key-prefix", rl_arrow_keys },
+  { "backward-byte", rl_backward_byte },
+  { "backward-char", rl_backward_char },
+  { "backward-delete-char", rl_rubout },
+  { "backward-kill-line", rl_backward_kill_line },
+  { "backward-kill-word", rl_backward_kill_word },
+  { "backward-word", rl_backward_word },
+  { "beginning-of-history", rl_beginning_of_history },
+  { "beginning-of-line", rl_beg_of_line },
+  { "bracketed-paste-begin", rl_bracketed_paste_begin },
+  { "call-last-kbd-macro", rl_call_last_kbd_macro },
+  { "capitalize-word", rl_capitalize_word },
+  { "character-search", rl_char_search },
+  { "character-search-backward", rl_backward_char_search },
+  { "clear-display", rl_clear_display },
+  { "clear-screen", rl_clear_screen },
+  { "complete", rl_complete },
+  { "copy-backward-word", rl_copy_backward_word },
+  { "copy-forward-word", rl_copy_forward_word },
+  { "copy-region-as-kill", rl_copy_region_to_kill },
+  { "delete-char", rl_delete },
+  { "delete-char-or-list", rl_delete_or_show_completions },
+  { "delete-horizontal-space", rl_delete_horizontal_space },
+  { "digit-argument", rl_digit_argument },
+  { "do-lowercase-version", rl_do_lowercase_version },
+  { "downcase-word", rl_downcase_word },
+  { "dump-functions", rl_dump_functions },
+  { "dump-macros", rl_dump_macros },
+  { "dump-variables", rl_dump_variables },
+  { "emacs-editing-mode", rl_emacs_editing_mode },
+  { "end-kbd-macro", rl_end_kbd_macro },
+  { "end-of-history", rl_end_of_history },
+  { "end-of-line", rl_end_of_line },
+  { "exchange-point-and-mark", rl_exchange_point_and_mark },
+  { "forward-backward-delete-char", rl_rubout_or_delete },
+  { "forward-byte", rl_forward_byte },
+  { "forward-char", rl_forward_char },
+  { "forward-search-history", rl_forward_search_history },
+  { "forward-word", rl_forward_word },
+  { "history-search-backward", rl_history_search_backward },
+  { "history-search-forward", rl_history_search_forward },
+  { "history-substring-search-backward", rl_history_substr_search_backward },
+  { "history-substring-search-forward", rl_history_substr_search_forward },
+  { "insert-comment", rl_insert_comment },
+  { "insert-completions", rl_insert_completions },
+  { "kill-whole-line", rl_kill_full_line },
+  { "kill-line", rl_kill_line },
+  { "kill-region", rl_kill_region },
+  { "kill-word", rl_kill_word },
+  { "menu-complete", rl_menu_complete },
+  { "menu-complete-backward", rl_backward_menu_complete },
+  { "next-history", rl_get_next_history },
+  { "next-screen-line", rl_next_screen_line },
+  { "non-incremental-forward-search-history", rl_noninc_forward_search },
+  { "non-incremental-reverse-search-history", rl_noninc_reverse_search },
+  { "non-incremental-forward-search-history-again", rl_noninc_forward_search_again },
+  { "non-incremental-reverse-search-history-again", rl_noninc_reverse_search_again },
+  { "old-menu-complete", rl_old_menu_complete },
+  { "operate-and-get-next", rl_operate_and_get_next },
+  { "overwrite-mode", rl_overwrite_mode },
+#if defined (_WIN32)
+  { "paste-from-clipboard", rl_paste_from_clipboard },
+#endif
+  { "possible-completions", rl_possible_completions },
+  { "previous-history", rl_get_previous_history },
+  { "previous-screen-line", rl_previous_screen_line },
+  { "print-last-kbd-macro", rl_print_last_kbd_macro },
+  { "quoted-insert", rl_quoted_insert },
+  { "re-read-init-file", rl_re_read_init_file },
+  { "redraw-current-line", rl_refresh_line},
+  { "reverse-search-history", rl_reverse_search_history },
+  { "revert-line", rl_revert_line },
+  { "self-insert", rl_insert },
+  { "set-mark", rl_set_mark },
+  { "skip-csi-sequence", rl_skip_csi_sequence },
+  { "start-kbd-macro", rl_start_kbd_macro },
+  { "tab-insert", rl_tab_insert },
+  { "tilde-expand", rl_tilde_expand },
+  { "transpose-chars", rl_transpose_chars },
+  { "transpose-words", rl_transpose_words },
+  { "tty-status", rl_tty_status },
+  { "undo", rl_undo_command },
+  { "universal-argument", rl_universal_argument },
+  { "unix-filename-rubout", rl_unix_filename_rubout },
+  { "unix-line-discard", rl_unix_line_discard },
+  { "unix-word-rubout", rl_unix_word_rubout },
+  { "upcase-word", rl_upcase_word },
+  { "yank", rl_yank },
+  { "yank-last-arg", rl_yank_last_arg },
+  { "yank-nth-arg", rl_yank_nth_arg },
+  { "yank-pop", rl_yank_pop },
+
+#if defined (VI_MODE)
+  { "vi-append-eol", rl_vi_append_eol },
+  { "vi-append-mode", rl_vi_append_mode },
+  { "vi-arg-digit", rl_vi_arg_digit },
+  { "vi-back-to-indent", rl_vi_back_to_indent },
+  { "vi-backward-bigword", rl_vi_bWord },
+  { "vi-backward-word", rl_vi_bword },
+  { "vi-bWord", rl_vi_bWord },
+  { "vi-bword", rl_vi_bword },	/* BEWARE: name matching is case insensitive */
+  { "vi-change-case", rl_vi_change_case },
+  { "vi-change-char", rl_vi_change_char },
+  { "vi-change-to", rl_vi_change_to },
+  { "vi-char-search", rl_vi_char_search },
+  { "vi-column", rl_vi_column },
+  { "vi-complete", rl_vi_complete },
+  { "vi-delete", rl_vi_delete },
+  { "vi-delete-to", rl_vi_delete_to },
+  { "vi-eWord", rl_vi_eWord },
+  { "vi-editing-mode", rl_vi_editing_mode },
+  { "vi-end-bigword", rl_vi_eWord },
+  { "vi-end-word", rl_vi_end_word },
+  { "vi-eof-maybe", rl_vi_eof_maybe },
+  { "vi-eword", rl_vi_eword },	/* BEWARE: name matching is case insensitive */
+  { "vi-fWord", rl_vi_fWord },
+  { "vi-fetch-history", rl_vi_fetch_history },
+  { "vi-first-print", rl_vi_first_print },
+  { "vi-forward-bigword", rl_vi_fWord },
+  { "vi-forward-word", rl_vi_fword },
+  { "vi-fword", rl_vi_fword },	/* BEWARE: name matching is case insensitive */
+  { "vi-goto-mark", rl_vi_goto_mark },
+  { "vi-insert-beg", rl_vi_insert_beg },
+  { "vi-insertion-mode", rl_vi_insert_mode },
+  { "vi-match", rl_vi_match },
+  { "vi-movement-mode", rl_vi_movement_mode },
+  { "vi-next-word", rl_vi_next_word },
+  { "vi-overstrike", rl_vi_overstrike },
+  { "vi-overstrike-delete", rl_vi_overstrike_delete },
+  { "vi-prev-word", rl_vi_prev_word },
+  { "vi-put", rl_vi_put },
+  { "vi-redo", rl_vi_redo },
+  { "vi-replace", rl_vi_replace },
+  { "vi-rubout", rl_vi_rubout },
+  { "vi-search", rl_vi_search },
+  { "vi-search-again", rl_vi_search_again },
+  { "vi-set-mark", rl_vi_set_mark },
+  { "vi-subst", rl_vi_subst },
+  { "vi-tilde-expand", rl_vi_tilde_expand },
+  { "vi-unix-word-rubout", rl_vi_unix_word_rubout },
+  { "vi-yank-arg", rl_vi_yank_arg },
+  { "vi-yank-pop", rl_vi_yank_pop },
+  { "vi-yank-to", rl_vi_yank_to },
+#endif /* VI_MODE */
+
+ {(char *)NULL, (rl_command_func_t *)NULL }
+};
+
+int
+rl_add_funmap_entry (const char *name, rl_command_func_t *function)
+{
+  if (funmap_entry + 2 >= funmap_size)
+    {
+      funmap_size += 64;
+      funmap = (FUNMAP **)xrealloc (funmap, funmap_size * sizeof (FUNMAP *));
+    }
+  
+  funmap[funmap_entry] = (FUNMAP *)xmalloc (sizeof (FUNMAP));
+  funmap[funmap_entry]->name = name;
+  funmap[funmap_entry]->function = function;
+
+  funmap[++funmap_entry] = (FUNMAP *)NULL;
+  return funmap_entry;
+}
+
+static int funmap_initialized;
+
+/* Make the funmap contain all of the default entries. */
+void
+rl_initialize_funmap (void)
+{
+  register int i;
+
+  if (funmap_initialized)
+    return;
+
+  for (i = 0; default_funmap[i].name; i++)
+    rl_add_funmap_entry (default_funmap[i].name, default_funmap[i].function);
+
+  funmap_initialized = 1;
+  funmap_program_specific_entry_start = i;
+}
+
+/* Produce a NULL terminated array of known function names.  The array
+   is sorted.  The array itself is allocated, but not the strings inside.
+   You should free () the array when you done, but not the pointers. */
+const char **
+rl_funmap_names (void)
+{
+  const char **result;
+  int result_size, result_index;
+
+  /* Make sure that the function map has been initialized. */
+  rl_initialize_funmap ();
+
+  for (result_index = result_size = 0, result = (const char **)NULL; funmap[result_index]; result_index++)
+    {
+      if (result_index + 2 > result_size)
+	{
+	  result_size += 20;
+	  result = (const char **)xrealloc (result, result_size * sizeof (char *));
+	}
+
+      result[result_index] = funmap[result_index]->name;
+      result[result_index + 1] = (char *)NULL;
+    }
+
+  qsort (result, result_index, sizeof (char *), (QSFUNC *)_rl_qsort_string_compare);
+  return (result);
+}
diff --git a/lib/readline/histexpand.c b/lib/readline/histexpand.c
new file mode 100644
index 0000000..b986dba
--- /dev/null
+++ b/lib/readline/histexpand.c
@@ -0,0 +1,1695 @@
+/* histexpand.c -- history expansion. */
+
+/* Copyright (C) 1989-2018 Free Software Foundation, Inc.
+
+   This file contains the GNU History Library (History), a set of
+   routines for managing the text of previously typed lines.
+
+   History is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   History is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with History.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <stdio.h>
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#if defined (HAVE_UNISTD_H)
+#  ifndef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include "rlmbutil.h"
+
+#include "history.h"
+#include "histlib.h"
+#include "chardefs.h"
+
+#include "rlshell.h"
+#include "xmalloc.h"
+
+#define HISTORY_WORD_DELIMITERS		" \t\n;&()|<>"
+#define HISTORY_QUOTE_CHARACTERS	"\"'`"
+#define HISTORY_EVENT_DELIMITERS	"^$*%-"
+
+#define slashify_in_quotes "\\`\"$"
+
+#define fielddelim(c)	(whitespace(c) || (c) == '\n')
+
+typedef int _hist_search_func_t PARAMS((const char *, int));
+
+static char error_pointer;
+
+static char *subst_lhs;
+static char *subst_rhs;
+static int subst_lhs_len;
+static int subst_rhs_len;
+
+/* Characters that delimit history event specifications and separate event
+   specifications from word designators.  Static for now */
+static char *history_event_delimiter_chars = HISTORY_EVENT_DELIMITERS;
+
+static char *get_history_word_specifier PARAMS((char *, char *, int *));
+static int history_tokenize_word PARAMS((const char *, int));
+static char **history_tokenize_internal PARAMS((const char *, int, int *));
+static char *history_substring PARAMS((const char *, int, int));
+static void freewords PARAMS((char **, int));
+static char *history_find_word PARAMS((char *, int));
+
+static char *quote_breaks PARAMS((char *));
+
+/* Variables exported by this file. */
+/* The character that represents the start of a history expansion
+   request.  This is usually `!'. */
+char history_expansion_char = '!';
+
+/* The character that invokes word substitution if found at the start of
+   a line.  This is usually `^'. */
+char history_subst_char = '^';
+
+/* During tokenization, if this character is seen as the first character
+   of a word, then it, and all subsequent characters up to a newline are
+   ignored.  For a Bourne shell, this should be '#'.  Bash special cases
+   the interactive comment character to not be a comment delimiter. */
+char history_comment_char = '\0';
+
+/* The list of characters which inhibit the expansion of text if found
+   immediately following history_expansion_char. */
+char *history_no_expand_chars = " \t\n\r=";
+
+/* If set to a non-zero value, single quotes inhibit history expansion.
+   The default is 0. */
+int history_quotes_inhibit_expansion = 0;
+
+/* Used to split words by history_tokenize_internal. */
+char *history_word_delimiters = HISTORY_WORD_DELIMITERS;
+
+/* If set, this points to a function that is called to verify that a
+   particular history expansion should be performed. */
+rl_linebuf_func_t *history_inhibit_expansion_function;
+
+int history_quoting_state = 0;
+
+/* **************************************************************** */
+/*								    */
+/*			History Expansion			    */
+/*								    */
+/* **************************************************************** */
+
+/* Hairy history expansion on text, not tokens.  This is of general
+   use, and thus belongs in this library. */
+
+/* The last string searched for by a !?string? search. */
+static char *search_string;
+/* The last string matched by a !?string? search. */
+static char *search_match;
+
+/* Return the event specified at TEXT + OFFSET modifying OFFSET to
+   point to after the event specifier.  Just a pointer to the history
+   line is returned; NULL is returned in the event of a bad specifier.
+   You pass STRING with *INDEX equal to the history_expansion_char that
+   begins this specification.
+   DELIMITING_QUOTE is a character that is allowed to end the string
+   specification for what to search for in addition to the normal
+   characters `:', ` ', `\t', `\n', and sometimes `?'.
+   So you might call this function like:
+   line = get_history_event ("!echo:p", &index, 0);  */
+char *
+get_history_event (const char *string, int *caller_index, int delimiting_quote)
+{
+  register int i;
+  register char c;
+  HIST_ENTRY *entry;
+  int which, sign, local_index, substring_okay;
+  _hist_search_func_t *search_func;
+  char *temp;
+
+  /* The event can be specified in a number of ways.
+
+     !!   the previous command
+     !n   command line N
+     !-n  current command-line minus N
+     !str the most recent command starting with STR
+     !?str[?]
+	  the most recent command containing STR
+
+     All values N are determined via HISTORY_BASE. */
+
+  i = *caller_index;
+
+  if (string[i] != history_expansion_char)
+    return ((char *)NULL);
+
+  /* Move on to the specification. */
+  i++;
+
+  sign = 1;
+  substring_okay = 0;
+
+#define RETURN_ENTRY(e, w) \
+	return ((e = history_get (w)) ? e->line : (char *)NULL)
+
+  /* Handle !! case. */
+  if (string[i] == history_expansion_char)
+    {
+      i++;
+      which = history_base + (history_length - 1);
+      *caller_index = i;
+      RETURN_ENTRY (entry, which);
+    }
+
+  /* Hack case of numeric line specification. */
+  if (string[i] == '-' && _rl_digit_p (string[i+1]))
+    {
+      sign = -1;
+      i++;
+    }
+
+  if (_rl_digit_p (string[i]))
+    {
+      /* Get the extent of the digits and compute the value. */
+      for (which = 0; _rl_digit_p (string[i]); i++)
+	which = (which * 10) + _rl_digit_value (string[i]);
+
+      *caller_index = i;
+
+      if (sign < 0)
+	which = (history_length + history_base) - which;
+
+      RETURN_ENTRY (entry, which);
+    }
+
+  /* This must be something to search for.  If the spec begins with
+     a '?', then the string may be anywhere on the line.  Otherwise,
+     the string must be found at the start of a line. */
+  if (string[i] == '?')
+    {
+      substring_okay++;
+      i++;
+    }
+
+  /* Only a closing `?' or a newline delimit a substring search string. */
+  for (local_index = i; c = string[i]; i++)
+    {
+#if defined (HANDLE_MULTIBYTE)
+      if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+	{
+	  int v;
+	  mbstate_t ps;
+
+	  memset (&ps, 0, sizeof (mbstate_t));
+	  /* These produce warnings because we're passing a const string to a
+	     function that takes a non-const string. */
+	  _rl_adjust_point ((char *)string, i, &ps);
+	  if ((v = _rl_get_char_len ((char *)string + i, &ps)) > 1)
+	    {
+	      i += v - 1;
+	      continue;
+	    }
+        }
+
+#endif /* HANDLE_MULTIBYTE */
+      if ((!substring_okay &&
+	    (whitespace (c) || c == ':' ||
+	    (i > local_index && history_event_delimiter_chars && c == '-') ||
+	    (c != '-' && history_event_delimiter_chars && member (c, history_event_delimiter_chars)) ||
+	    (history_search_delimiter_chars && member (c, history_search_delimiter_chars)) ||
+	    string[i] == delimiting_quote)) ||
+	  string[i] == '\n' ||
+	  (substring_okay && string[i] == '?'))
+	break;
+    }
+
+  which = i - local_index;
+  temp = (char *)xmalloc (1 + which);
+  if (which)
+    strncpy (temp, string + local_index, which);
+  temp[which] = '\0';
+
+  if (substring_okay && string[i] == '?')
+    i++;
+
+  *caller_index = i;
+
+#define FAIL_SEARCH() \
+  do { \
+    history_offset = history_length; xfree (temp) ; return (char *)NULL; \
+  } while (0)
+
+  /* If there is no search string, try to use the previous search string,
+     if one exists.  If not, fail immediately. */
+  if (*temp == '\0' && substring_okay)
+    {
+      if (search_string)
+        {
+          xfree (temp);
+          temp = savestring (search_string);
+        }
+      else
+        FAIL_SEARCH ();
+    }
+
+  search_func = substring_okay ? history_search : history_search_prefix;
+  while (1)
+    {
+      local_index = (*search_func) (temp, -1);
+
+      if (local_index < 0)
+	FAIL_SEARCH ();
+
+      if (local_index == 0 || substring_okay)
+	{
+	  entry = current_history ();
+	  if (entry == 0)
+	    FAIL_SEARCH ();
+	  history_offset = history_length;
+	
+	  /* If this was a substring search, then remember the
+	     string that we matched for word substitution. */
+	  if (substring_okay)
+	    {
+	      FREE (search_string);
+	      search_string = temp;
+
+	      FREE (search_match);
+	      search_match = history_find_word (entry->line, local_index);
+	    }
+	  else
+	    xfree (temp);
+
+	  return (entry->line);
+	}
+
+      if (history_offset)
+	history_offset--;
+      else
+	FAIL_SEARCH ();
+    }
+#undef FAIL_SEARCH
+#undef RETURN_ENTRY
+}
+
+/* Function for extracting single-quoted strings.  Used for inhibiting
+   history expansion within single quotes. */
+
+/* Extract the contents of STRING as if it is enclosed in single quotes.
+   SINDEX, when passed in, is the offset of the character immediately
+   following the opening single quote; on exit, SINDEX is left pointing
+   to the closing single quote.  FLAGS currently used to allow backslash
+   to escape a single quote (e.g., for bash $'...'). */
+static void
+hist_string_extract_single_quoted (char *string, int *sindex, int flags)
+{
+  register int i;
+
+  for (i = *sindex; string[i] && string[i] != '\''; i++)
+    {
+      if ((flags & 1) && string[i] == '\\' && string[i+1])
+        i++;
+    }
+
+  *sindex = i;
+}
+
+static char *
+quote_breaks (char *s)
+{
+  register char *p, *r;
+  char *ret;
+  int len = 3;
+
+  for (p = s; p && *p; p++, len++)
+    {
+      if (*p == '\'')
+	len += 3;
+      else if (whitespace (*p) || *p == '\n')
+	len += 2;
+    }
+
+  r = ret = (char *)xmalloc (len);
+  *r++ = '\'';
+  for (p = s; p && *p; )
+    {
+      if (*p == '\'')
+	{
+	  *r++ = '\'';
+	  *r++ = '\\';
+	  *r++ = '\'';
+	  *r++ = '\'';
+	  p++;
+	}
+      else if (whitespace (*p) || *p == '\n')
+	{
+	  *r++ = '\'';
+	  *r++ = *p++;
+	  *r++ = '\'';
+	}
+      else
+	*r++ = *p++;
+    }
+  *r++ = '\'';
+  *r = '\0';
+  return ret;
+}
+
+static char *
+hist_error(char *s, int start, int current, int errtype)
+{
+  char *temp;
+  const char *emsg;
+  int ll, elen;
+
+  ll = current - start;
+
+  switch (errtype)
+    {
+    case EVENT_NOT_FOUND:
+      emsg = "event not found";
+      elen = 15;
+      break;
+    case BAD_WORD_SPEC:
+      emsg = "bad word specifier";
+      elen = 18;
+      break;
+    case SUBST_FAILED:
+      emsg = "substitution failed";
+      elen = 19;
+      break;
+    case BAD_MODIFIER:
+      emsg = "unrecognized history modifier";
+      elen = 29;
+      break;
+    case NO_PREV_SUBST:
+      emsg = "no previous substitution";
+      elen = 24;
+      break;
+    default:
+      emsg = "unknown expansion error";
+      elen = 23;
+      break;
+    }
+
+  temp = (char *)xmalloc (ll + elen + 3);
+  if (s[start])
+    strncpy (temp, s + start, ll);
+  else
+    ll = 0;
+  temp[ll] = ':';
+  temp[ll + 1] = ' ';
+  strcpy (temp + ll + 2, emsg);
+  return (temp);
+}
+
+/* Get a history substitution string from STR starting at *IPTR
+   and return it.  The length is returned in LENPTR.
+
+   A backslash can quote the delimiter.  If the string is the
+   empty string, the previous pattern is used.  If there is
+   no previous pattern for the lhs, the last history search
+   string is used.
+
+   If IS_RHS is 1, we ignore empty strings and set the pattern
+   to "" anyway.  subst_lhs is not changed if the lhs is empty;
+   subst_rhs is allowed to be set to the empty string. */
+
+static char *
+get_subst_pattern (char *str, int *iptr, int delimiter, int is_rhs, int *lenptr)
+{
+  register int si, i, j, k;
+  char *s;
+#if defined (HANDLE_MULTIBYTE)
+  mbstate_t ps;
+#endif
+
+  s = (char *)NULL;
+  i = *iptr;
+
+#if defined (HANDLE_MULTIBYTE)
+  memset (&ps, 0, sizeof (mbstate_t));
+  _rl_adjust_point (str, i, &ps);
+#endif
+
+  for (si = i; str[si] && str[si] != delimiter; si++)
+#if defined (HANDLE_MULTIBYTE)
+    if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+      {
+	int v;
+	if ((v = _rl_get_char_len (str + si, &ps)) > 1)
+	  si += v - 1;
+	else if (str[si] == '\\' && str[si + 1] == delimiter)
+	  si++;
+      }
+    else
+#endif /* HANDLE_MULTIBYTE */
+      if (str[si] == '\\' && str[si + 1] == delimiter)
+	si++;
+
+  if (si > i || is_rhs)
+    {
+      s = (char *)xmalloc (si - i + 1);
+      for (j = 0, k = i; k < si; j++, k++)
+	{
+	  /* Remove a backslash quoting the search string delimiter. */
+	  if (str[k] == '\\' && str[k + 1] == delimiter)
+	    k++;
+	  s[j] = str[k];
+	}
+      s[j] = '\0';
+      if (lenptr)
+	*lenptr = j;
+    }
+
+  i = si;
+  if (str[i])
+    i++;
+  *iptr = i;
+
+  return s;
+}
+
+static void
+postproc_subst_rhs (void)
+{
+  char *new;
+  int i, j, new_size;
+
+  new = (char *)xmalloc (new_size = subst_rhs_len + subst_lhs_len);
+  for (i = j = 0; i < subst_rhs_len; i++)
+    {
+      if (subst_rhs[i] == '&')
+	{
+	  if (j + subst_lhs_len >= new_size)
+	    new = (char *)xrealloc (new, (new_size = new_size * 2 + subst_lhs_len));
+	  strcpy (new + j, subst_lhs);
+	  j += subst_lhs_len;
+	}
+      else
+	{
+	  /* a single backslash protects the `&' from lhs interpolation */
+	  if (subst_rhs[i] == '\\' && subst_rhs[i + 1] == '&')
+	    i++;
+	  if (j >= new_size)
+	    new = (char *)xrealloc (new, new_size *= 2);
+	  new[j++] = subst_rhs[i];
+	}
+    }
+  new[j] = '\0';
+  xfree (subst_rhs);
+  subst_rhs = new;
+  subst_rhs_len = j;
+}
+
+/* Expand the bulk of a history specifier starting at STRING[START].
+   Returns 0 if everything is OK, -1 if an error occurred, and 1
+   if the `p' modifier was supplied and the caller should just print
+   the returned string.  Returns the new index into string in
+   *END_INDEX_PTR, and the expanded specifier in *RET_STRING. */
+/* need current line for !# */
+static int
+history_expand_internal (char *string, int start, int qc, int *end_index_ptr, char **ret_string, char *current_line)
+{
+  int i, n, starting_index;
+  int substitute_globally, subst_bywords, want_quotes, print_only;
+  char *event, *temp, *result, *tstr, *t, c, *word_spec;
+  int result_len;
+#if defined (HANDLE_MULTIBYTE)
+  mbstate_t ps;
+
+  memset (&ps, 0, sizeof (mbstate_t));
+#endif
+
+  result = (char *)xmalloc (result_len = 128);
+
+  i = start;
+
+  /* If it is followed by something that starts a word specifier,
+     then !! is implied as the event specifier. */
+
+  if (member (string[i + 1], ":$*%^"))
+    {
+      char fake_s[3];
+      int fake_i = 0;
+      i++;
+      fake_s[0] = fake_s[1] = history_expansion_char;
+      fake_s[2] = '\0';
+      event = get_history_event (fake_s, &fake_i, 0);
+    }
+  else if (string[i + 1] == '#')
+    {
+      i += 2;
+      event = current_line;
+    }
+  else
+    event = get_history_event (string, &i, qc);
+	  
+  if (event == 0)
+    {
+      *ret_string = hist_error (string, start, i, EVENT_NOT_FOUND);
+      xfree (result);
+      return (-1);
+    }
+
+  /* If a word specifier is found, then do what that requires. */
+  starting_index = i;
+  word_spec = get_history_word_specifier (string, event, &i);
+
+  /* There is no such thing as a `malformed word specifier'.  However,
+     it is possible for a specifier that has no match.  In that case,
+     we complain. */
+  if (word_spec == (char *)&error_pointer)
+    {
+      *ret_string = hist_error (string, starting_index, i, BAD_WORD_SPEC);
+      xfree (result);
+      return (-1);
+    }
+
+  /* If no word specifier, than the thing of interest was the event. */
+  temp = word_spec ? savestring (word_spec) : savestring (event);
+  FREE (word_spec);
+
+  /* Perhaps there are other modifiers involved.  Do what they say. */
+  want_quotes = substitute_globally = subst_bywords = print_only = 0;
+  starting_index = i;
+
+  while (string[i] == ':')
+    {
+      c = string[i + 1];
+
+      if (c == 'g' || c == 'a')
+	{
+	  substitute_globally = 1;
+	  i++;
+	  c = string[i + 1];
+	}
+      else if (c == 'G')
+	{
+	  subst_bywords = 1;
+	  i++;
+	  c = string[i + 1];
+	}
+
+      switch (c)
+	{
+	default:
+	  *ret_string = hist_error (string, i+1, i+2, BAD_MODIFIER);
+	  xfree (result);
+	  xfree (temp);
+	  return -1;
+
+	case 'q':
+	  want_quotes = 'q';
+	  break;
+
+	case 'x':
+	  want_quotes = 'x';
+	  break;
+
+	  /* :p means make this the last executed line.  So we
+	     return an error state after adding this line to the
+	     history. */
+	case 'p':
+	  print_only = 1;
+	  break;
+
+	  /* :t discards all but the last part of the pathname. */
+	case 't':
+	  tstr = strrchr (temp, '/');
+	  if (tstr)
+	    {
+	      tstr++;
+	      t = savestring (tstr);
+	      xfree (temp);
+	      temp = t;
+	    }
+	  break;
+
+	  /* :h discards the last part of a pathname. */
+	case 'h':
+	  tstr = strrchr (temp, '/');
+	  if (tstr)
+	    *tstr = '\0';
+	  break;
+
+	  /* :r discards the suffix. */
+	case 'r':
+	  tstr = strrchr (temp, '.');
+	  if (tstr)
+	    *tstr = '\0';
+	  break;
+
+	  /* :e discards everything but the suffix. */
+	case 'e':
+	  tstr = strrchr (temp, '.');
+	  if (tstr)
+	    {
+	      t = savestring (tstr);
+	      xfree (temp);
+	      temp = t;
+	    }
+	  break;
+
+	/* :s/this/that substitutes `that' for the first
+	   occurrence of `this'.  :gs/this/that substitutes `that'
+	   for each occurrence of `this'.  :& repeats the last
+	   substitution.  :g& repeats the last substitution
+	   globally. */
+
+	case '&':
+	case 's':
+	  {
+	    char *new_event;
+	    int delimiter, failed, si, l_temp, ws, we;
+
+	    if (c == 's')
+	      {
+		if (i + 2 < (int)strlen (string))
+		  {
+#if defined (HANDLE_MULTIBYTE)
+		    if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+		      {
+			_rl_adjust_point (string, i + 2, &ps);
+			if (_rl_get_char_len (string + i + 2, &ps) > 1)
+			  delimiter = 0;
+			else
+			  delimiter = string[i + 2];
+		      }
+		    else
+#endif /* HANDLE_MULTIBYTE */
+		      delimiter = string[i + 2];
+		  }
+		else
+		  break;	/* no search delimiter */
+
+		i += 3;
+
+		t = get_subst_pattern (string, &i, delimiter, 0, &subst_lhs_len);
+		/* An empty substitution lhs with no previous substitution
+		   uses the last search string as the lhs. */
+		if (t)
+		  {
+		    FREE (subst_lhs);
+		    subst_lhs = t;
+		  }
+		else if (!subst_lhs)
+		  {
+		    if (search_string && *search_string)
+		      {
+			subst_lhs = savestring (search_string);
+			subst_lhs_len = strlen (subst_lhs);
+		      }
+		    else
+		      {
+			subst_lhs = (char *) NULL;
+			subst_lhs_len = 0;
+		      }
+		  }
+
+		FREE (subst_rhs);
+		subst_rhs = get_subst_pattern (string, &i, delimiter, 1, &subst_rhs_len);
+
+		/* If `&' appears in the rhs, it's supposed to be replaced
+		   with the lhs. */
+		if (member ('&', subst_rhs))
+		  postproc_subst_rhs ();
+	      }
+	    else
+	      i += 2;
+
+	    /* If there is no lhs, the substitution can't succeed. */
+	    if (subst_lhs_len == 0)
+	      {
+		*ret_string = hist_error (string, starting_index, i, NO_PREV_SUBST);
+		xfree (result);
+		xfree (temp);
+		return -1;
+	      }
+
+	    l_temp = strlen (temp);
+	    /* Ignore impossible cases. */
+	    if (subst_lhs_len > l_temp)
+	      {
+		*ret_string = hist_error (string, starting_index, i, SUBST_FAILED);
+		xfree (result);
+		xfree (temp);
+		return (-1);
+	      }
+
+	    /* Find the first occurrence of THIS in TEMP. */
+	    /* Substitute SUBST_RHS for SUBST_LHS in TEMP.  There are three
+	       cases to consider:
+
+		 1.  substitute_globally == subst_bywords == 0
+		 2.  substitute_globally == 1 && subst_bywords == 0
+		 3.  substitute_globally == 0 && subst_bywords == 1
+
+	       In the first case, we substitute for the first occurrence only.
+	       In the second case, we substitute for every occurrence.
+	       In the third case, we tokenize into words and substitute the
+	       first occurrence of each word. */
+
+	    si = we = 0;
+	    for (failed = 1; (si + subst_lhs_len) <= l_temp; si++)
+	      {
+		/* First skip whitespace and find word boundaries if
+		   we're past the end of the word boundary we found
+		   the last time. */
+		if (subst_bywords && si > we)
+		  {
+		    for (; temp[si] && fielddelim (temp[si]); si++)
+		      ;
+		    ws = si;
+		    we = history_tokenize_word (temp, si);
+		  }
+
+		if (STREQN (temp+si, subst_lhs, subst_lhs_len))
+		  {
+		    int len = subst_rhs_len - subst_lhs_len + l_temp;
+		    new_event = (char *)xmalloc (1 + len);
+		    strncpy (new_event, temp, si);
+		    strncpy (new_event + si, subst_rhs, subst_rhs_len);
+		    strncpy (new_event + si + subst_rhs_len,
+			     temp + si + subst_lhs_len,
+			     l_temp - (si + subst_lhs_len));
+		    new_event[len] = '\0';
+		    xfree (temp);
+		    temp = new_event;
+
+		    failed = 0;
+
+		    if (substitute_globally)
+		      {
+			/* Reported to fix a bug that causes it to skip every
+			   other match when matching a single character.  Was
+			   si += subst_rhs_len previously. */
+			si += subst_rhs_len - 1;
+			l_temp = strlen (temp);
+			substitute_globally++;
+			continue;
+		      }
+		    else if (subst_bywords)
+		      {
+			si = we;
+			l_temp = strlen (temp);
+			continue;
+		      }
+		    else
+		      break;
+		  }
+	      }
+
+	    if (substitute_globally > 1)
+	      {
+		substitute_globally = 0;
+		continue;	/* don't want to increment i */
+	      }
+
+	    if (failed == 0)
+	      continue;		/* don't want to increment i */
+
+	    *ret_string = hist_error (string, starting_index, i, SUBST_FAILED);
+	    xfree (result);
+	    xfree (temp);
+	    return (-1);
+	  }
+	}
+      i += 2;
+    }
+  /* Done with modifiers. */
+  /* Believe it or not, we have to back the pointer up by one. */
+  --i;
+
+  if (want_quotes)
+    {
+      char *x;
+
+      if (want_quotes == 'q')
+	x = sh_single_quote (temp);
+      else if (want_quotes == 'x')
+	x = quote_breaks (temp);
+      else
+	x = savestring (temp);
+
+      xfree (temp);
+      temp = x;
+    }
+
+  n = strlen (temp);
+  if (n >= result_len)
+    result = (char *)xrealloc (result, n + 2);
+  strcpy (result, temp);
+  xfree (temp);
+
+  *end_index_ptr = i;
+  *ret_string = result;
+  return (print_only);
+}
+
+/* Expand the string STRING, placing the result into OUTPUT, a pointer
+   to a string.  Returns:
+
+  -1) If there was an error in expansion.
+   0) If no expansions took place (or, if the only change in
+      the text was the de-slashifying of the history expansion
+      character)
+   1) If expansions did take place
+   2) If the `p' modifier was given and the caller should print the result
+
+  If an error occurred in expansion, then OUTPUT contains a descriptive
+  error message. */
+
+#define ADD_STRING(s) \
+	do \
+	  { \
+	    int sl = strlen (s); \
+	    j += sl; \
+	    if (j >= result_len) \
+	      { \
+		while (j >= result_len) \
+		  result_len += 128; \
+		result = (char *)xrealloc (result, result_len); \
+	      } \
+	    strcpy (result + j - sl, s); \
+	  } \
+	while (0)
+
+#define ADD_CHAR(c) \
+	do \
+	  { \
+	    if (j >= result_len - 1) \
+	      result = (char *)xrealloc (result, result_len += 64); \
+	    result[j++] = c; \
+	    result[j] = '\0'; \
+	  } \
+	while (0)
+
+int
+history_expand (char *hstring, char **output)
+{
+  register int j;
+  int i, r, l, passc, cc, modified, eindex, only_printing, dquote, squote, flag;
+  char *string;
+
+  /* The output string, and its length. */
+  int result_len;
+  char *result;
+
+#if defined (HANDLE_MULTIBYTE)
+  char mb[MB_LEN_MAX];
+  mbstate_t ps;
+#endif
+
+  /* Used when adding the string. */
+  char *temp;
+
+  if (output == 0)
+    return 0;
+
+  /* Setting the history expansion character to 0 inhibits all
+     history expansion. */
+  if (history_expansion_char == 0)
+    {
+      *output = savestring (hstring);
+      return (0);
+    }
+    
+  /* Prepare the buffer for printing error messages. */
+  result = (char *)xmalloc (result_len = 256);
+  result[0] = '\0';
+
+  only_printing = modified = 0;
+  l = strlen (hstring);
+
+  /* Grovel the string.  Only backslash and single quotes can quote the
+     history escape character.  We also handle arg specifiers. */
+
+  /* Before we grovel forever, see if the history_expansion_char appears
+     anywhere within the text. */
+
+  /* The quick substitution character is a history expansion all right.  That
+     is to say, "^this^that^" is equivalent to "!!:s^this^that^", and in fact,
+     that is the substitution that we do. */
+  if (hstring[0] == history_subst_char)
+    {
+      string = (char *)xmalloc (l + 5);
+
+      string[0] = string[1] = history_expansion_char;
+      string[2] = ':';
+      string[3] = 's';
+      strcpy (string + 4, hstring);
+      l += 4;
+    }
+  else
+    {
+#if defined (HANDLE_MULTIBYTE)
+      memset (&ps, 0, sizeof (mbstate_t));
+#endif
+
+      string = hstring;
+      /* If not quick substitution, still maybe have to do expansion. */
+
+      /* `!' followed by one of the characters in history_no_expand_chars
+	 is NOT an expansion. */
+      dquote = history_quoting_state == '"';
+      squote = history_quoting_state == '\'';
+
+      /* If the calling application tells us we are already reading a
+	 single-quoted string, consume the rest of the string right now
+	 and then go on. */
+      i = 0;
+      if (squote && history_quotes_inhibit_expansion)
+	{
+	  hist_string_extract_single_quoted (string, &i, 0);
+	  squote = 0;
+	  if (string[i])
+	    i++;
+	}
+
+      for ( ; string[i]; i++)
+	{
+#if defined (HANDLE_MULTIBYTE)
+	  if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+	    {
+	      int v;
+	      v = _rl_get_char_len (string + i, &ps);
+	      if (v > 1)
+		{
+		  i += v - 1;
+		  continue;
+		}
+	    }
+#endif /* HANDLE_MULTIBYTE */
+
+	  cc = string[i + 1];
+	  /* The history_comment_char, if set, appearing at the beginning
+	     of a word signifies that the rest of the line should not have
+	     history expansion performed on it.
+	     Skip the rest of the line and break out of the loop. */
+	  if (history_comment_char && string[i] == history_comment_char &&
+	      dquote == 0 &&
+	      (i == 0 || member (string[i - 1], history_word_delimiters)))
+	    {
+	      while (string[i])
+		i++;
+	      break;
+	    }
+	  else if (string[i] == history_expansion_char)
+	    {
+	      if (cc == 0 || member (cc, history_no_expand_chars))
+		continue;
+	      /* DQUOTE won't be set unless history_quotes_inhibit_expansion
+		 is set.  The idea here is to treat double-quoted strings the
+		 same as the word outside double quotes; in effect making the
+		 double quote part of history_no_expand_chars when DQUOTE is
+		 set. */
+	      else if (dquote && cc == '"')
+		continue;
+	      /* If the calling application has set
+		 history_inhibit_expansion_function to a function that checks
+		 for special cases that should not be history expanded,
+		 call the function and skip the expansion if it returns a
+		 non-zero value. */
+	      else if (history_inhibit_expansion_function &&
+			(*history_inhibit_expansion_function) (string, i))
+		continue;
+	      else
+		break;
+	    }
+	  /* Shell-like quoting: allow backslashes to quote double quotes
+	     inside a double-quoted string. */
+	  else if (dquote && string[i] == '\\' && cc == '"')
+	    i++;
+	  /* More shell-like quoting:  if we're paying attention to single
+	     quotes and letting them quote the history expansion character,
+	     then we need to pay attention to double quotes, because single
+	     quotes are not special inside double-quoted strings. */
+	  else if (history_quotes_inhibit_expansion && string[i] == '"')
+	    {
+	      dquote = 1 - dquote;
+	    }
+	  else if (dquote == 0 && history_quotes_inhibit_expansion && string[i] == '\'')
+	    {
+	      /* If this is bash, single quotes inhibit history expansion. */
+	      flag = (i > 0 && string[i - 1] == '$');
+	      i++;
+	      hist_string_extract_single_quoted (string, &i, flag);
+	    }
+	  else if (history_quotes_inhibit_expansion && string[i] == '\\')
+	    {
+	      /* If this is bash, allow backslashes to quote single
+		 quotes and the history expansion character. */
+	      if (cc == '\'' || cc == history_expansion_char)
+		i++;
+	    }
+	  
+	}
+	  
+      if (string[i] != history_expansion_char)
+	{
+	  xfree (result);
+	  *output = savestring (string);
+	  return (0);
+	}
+    }
+
+  /* Extract and perform the substitution. */
+  dquote = history_quoting_state == '"';
+  squote = history_quoting_state == '\'';
+
+  /* If the calling application tells us we are already reading a
+     single-quoted string, consume the rest of the string right now
+     and then go on. */
+  i = j = 0;
+  if (squote && history_quotes_inhibit_expansion)
+    {
+      int c;
+
+      hist_string_extract_single_quoted (string, &i, 0);
+      squote = 0;
+      for (c = 0; c < i; c++)
+	ADD_CHAR (string[c]);      
+      if (string[i])
+	{
+	  ADD_CHAR (string[i]);
+	  i++;
+	}
+    }
+
+  for (passc = 0; i < l; i++)
+    {
+      int qc, tchar = string[i];
+
+      if (passc)
+	{
+	  passc = 0;
+	  ADD_CHAR (tchar);
+	  continue;
+	}
+
+#if defined (HANDLE_MULTIBYTE)
+      if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+	{
+	  int k, c;
+
+	  c = tchar;
+	  memset (mb, 0, sizeof (mb));
+	  for (k = 0; k < MB_LEN_MAX; k++)
+	    {
+	      mb[k] = (char)c;
+	      memset (&ps, 0, sizeof (mbstate_t));
+	      if (_rl_get_char_len (mb, &ps) == -2)
+		c = string[++i];
+	      else
+		break;
+	    }
+	  if (strlen (mb) > 1)
+	    {
+	      ADD_STRING (mb);
+	      continue;
+	    }
+	}
+#endif /* HANDLE_MULTIBYTE */
+
+      if (tchar == history_expansion_char)
+	tchar = -3;
+      else if (tchar == history_comment_char)
+	tchar = -2;
+
+      switch (tchar)
+	{
+	default:
+	  ADD_CHAR (string[i]);
+	  break;
+
+	case '\\':
+	  passc++;
+	  ADD_CHAR (tchar);
+	  break;
+
+	case '"':
+	  dquote = 1 - dquote;
+	  ADD_CHAR (tchar);
+	  break;
+	  
+	case '\'':
+	  {
+	    /* If history_quotes_inhibit_expansion is set, single quotes
+	       inhibit history expansion, otherwise they are treated like
+	       double quotes. */
+	    if (squote)
+	      {
+	        squote = 0;
+	        ADD_CHAR (tchar);
+	      }
+	    else if (dquote == 0 && history_quotes_inhibit_expansion)
+	      {
+		int quote, slen;
+
+		flag = (i > 0 && string[i - 1] == '$');
+		quote = i++;
+		hist_string_extract_single_quoted (string, &i, flag);
+
+		slen = i - quote + 2;
+		temp = (char *)xmalloc (slen);
+		strncpy (temp, string + quote, slen);
+		temp[slen - 1] = '\0';
+		ADD_STRING (temp);
+		xfree (temp);
+	      }
+	    else if (dquote == 0 && squote == 0 && history_quotes_inhibit_expansion == 0)
+	      {
+	        squote = 1;
+	        ADD_CHAR (string[i]);
+	      }
+	    else
+	      ADD_CHAR (string[i]);
+	    break;
+	  }
+
+	case -2:		/* history_comment_char */
+	  if ((dquote == 0 || history_quotes_inhibit_expansion == 0) &&
+	      (i == 0 || member (string[i - 1], history_word_delimiters)))
+	    {
+	      temp = (char *)xmalloc (l - i + 1);
+	      strcpy (temp, string + i);
+	      ADD_STRING (temp);
+	      xfree (temp);
+	      i = l;
+	    }
+	  else
+	    ADD_CHAR (string[i]);
+	  break;
+
+	case -3:		/* history_expansion_char */
+	  cc = string[i + 1];
+
+	  /* If the history_expansion_char is followed by one of the
+	     characters in history_no_expand_chars, then it is not a
+	     candidate for expansion of any kind. */
+	  if (cc == 0 || member (cc, history_no_expand_chars) ||
+			 (dquote && cc == '"') ||
+	  		 (history_inhibit_expansion_function && (*history_inhibit_expansion_function) (string, i)))
+	    {
+	      ADD_CHAR (string[i]);
+	      break;
+	    }
+
+#if defined (NO_BANG_HASH_MODIFIERS)
+	  /* There is something that is listed as a `word specifier' in csh
+	     documentation which means `the expanded text to this point'.
+	     That is not a word specifier, it is an event specifier.  If we
+	     don't want to allow modifiers with `!#', just stick the current
+	     output line in again. */
+	  if (cc == '#')
+	    {
+	      if (result)
+		{
+		  temp = (char *)xmalloc (1 + strlen (result));
+		  strcpy (temp, result);
+		  ADD_STRING (temp);
+		  xfree (temp);
+		}
+	      i++;
+	      break;
+	    }
+#endif
+	  qc = squote ? '\'' : (dquote ? '"' : 0);
+	  r = history_expand_internal (string, i, qc, &eindex, &temp, result);
+	  if (r < 0)
+	    {
+	      *output = temp;
+	      xfree (result);
+	      if (string != hstring)
+		xfree (string);
+	      return -1;
+	    }
+	  else
+	    {
+	      if (temp)
+		{
+		  modified++;
+		  if (*temp)
+		    ADD_STRING (temp);
+		  xfree (temp);
+		}
+	      only_printing += r == 1;
+	      i = eindex;
+	    }
+	  break;
+	}
+    }
+
+  *output = result;
+  if (string != hstring)
+    xfree (string);
+
+  if (only_printing)
+    {
+#if 0
+      add_history (result);
+#endif
+      return (2);
+    }
+
+  return (modified != 0);
+}
+
+/* Return a consed string which is the word specified in SPEC, and found
+   in FROM.  NULL is returned if there is no spec.  The address of
+   ERROR_POINTER is returned if the word specified cannot be found.
+   CALLER_INDEX is the offset in SPEC to start looking; it is updated
+   to point to just after the last character parsed. */
+static char *
+get_history_word_specifier (char *spec, char *from, int *caller_index)
+{
+  register int i = *caller_index;
+  int first, last;
+  int expecting_word_spec = 0;
+  char *result;
+
+  /* The range of words to return doesn't exist yet. */
+  first = last = 0;
+  result = (char *)NULL;
+
+  /* If we found a colon, then this *must* be a word specification.  If
+     it isn't, then it is an error. */
+  if (spec[i] == ':')
+    {
+      i++;
+      expecting_word_spec++;
+    }
+
+  /* Handle special cases first. */
+
+  /* `%' is the word last searched for. */
+  if (spec[i] == '%')
+    {
+      *caller_index = i + 1;
+      return (search_match ? savestring (search_match) : savestring (""));
+    }
+
+  /* `*' matches all of the arguments, but not the command. */
+  if (spec[i] == '*')
+    {
+      *caller_index = i + 1;
+      result = history_arg_extract (1, '$', from);
+      return (result ? result : savestring (""));
+    }
+
+  /* `$' is last arg. */
+  if (spec[i] == '$')
+    {
+      *caller_index = i + 1;
+      return (history_arg_extract ('$', '$', from));
+    }
+
+  /* Try to get FIRST and LAST figured out. */
+
+  if (spec[i] == '-')
+    first = 0;
+  else if (spec[i] == '^')
+    {
+      first = 1;
+      i++;
+    }
+  else if (_rl_digit_p (spec[i]) && expecting_word_spec)
+    {
+      for (first = 0; _rl_digit_p (spec[i]); i++)
+	first = (first * 10) + _rl_digit_value (spec[i]);
+    }
+  else
+    return ((char *)NULL);	/* no valid `first' for word specifier */
+
+  if (spec[i] == '^' || spec[i] == '*')
+    {
+      last = (spec[i] == '^') ? 1 : '$';	/* x* abbreviates x-$ */
+      i++;
+    }
+  else if (spec[i] != '-')
+    last = first;
+  else
+    {
+      i++;
+
+      if (_rl_digit_p (spec[i]))
+	{
+	  for (last = 0; _rl_digit_p (spec[i]); i++)
+	    last = (last * 10) + _rl_digit_value (spec[i]);
+	}
+      else if (spec[i] == '$')
+	{
+	  i++;
+	  last = '$';
+	}
+      else if (spec[i] == '^')
+	{
+	  i++;
+	  last = 1;
+	}
+#if 0
+      else if (!spec[i] || spec[i] == ':')
+	/* check against `:' because there could be a modifier separator */
+#else
+      else
+	/* csh seems to allow anything to terminate the word spec here,
+	   leaving it as an abbreviation. */
+#endif
+	last = -1;		/* x- abbreviates x-$ omitting word `$' */
+    }
+
+  *caller_index = i;
+
+  if (last >= first || last == '$' || last < 0)
+    result = history_arg_extract (first, last, from);
+
+  return (result ? result : (char *)&error_pointer);
+}
+
+/* Extract the args specified, starting at FIRST, and ending at LAST.
+   The args are taken from STRING.  If either FIRST or LAST is < 0,
+   then make that arg count from the right (subtract from the number of
+   tokens, so that FIRST = -1 means the next to last token on the line).
+   If LAST is `$' the last arg from STRING is used. */
+char *
+history_arg_extract (int first, int last, const char *string)
+{
+  register int i, len;
+  char *result;
+  int size, offset;
+  char **list;
+
+  /* XXX - think about making history_tokenize return a struct array,
+     each struct in array being a string and a length to avoid the
+     calls to strlen below. */
+  if ((list = history_tokenize (string)) == NULL)
+    return ((char *)NULL);
+
+  for (len = 0; list[len]; len++)
+    ;
+
+  if (last < 0)
+    last = len + last - 1;
+
+  if (first < 0)
+    first = len + first - 1;
+
+  if (last == '$')
+    last = len - 1;
+
+  if (first == '$')
+    first = len - 1;
+
+  last++;
+
+  if (first >= len || last > len || first < 0 || last < 0 || first > last)
+    result = ((char *)NULL);
+  else
+    {
+      for (size = 0, i = first; i < last; i++)
+	size += strlen (list[i]) + 1;
+      result = (char *)xmalloc (size + 1);
+      result[0] = '\0';
+
+      for (i = first, offset = 0; i < last; i++)
+	{
+	  strcpy (result + offset, list[i]);
+	  offset += strlen (list[i]);
+	  if (i + 1 < last)
+	    {
+      	      result[offset++] = ' ';
+	      result[offset] = 0;
+	    }
+	}
+    }
+
+  for (i = 0; i < len; i++)
+    xfree (list[i]);
+  xfree (list);
+
+  return (result);
+}
+
+static int
+history_tokenize_word (const char *string, int ind)
+{
+  register int i, j;
+  int delimiter, nestdelim, delimopen;
+
+  i = ind;
+  delimiter = nestdelim = 0;
+
+  if (member (string[i], "()\n"))	/* XXX - included \n, but why? been here forever */
+    {
+      i++;
+      return i;
+    }
+
+  if (ISDIGIT (string[i]))
+    {
+      j = i;
+      while (string[j] && ISDIGIT (string[j]))
+	j++;
+      if (string[j] == 0)
+	return (j);
+      if (string[j] == '<' || string[j] == '>')
+	i = j;			/* digit sequence is a file descriptor */
+      else
+	{
+	  i = j;
+	  goto get_word;	/* digit sequence is part of a word */
+	}
+    }
+
+  if (member (string[i], "<>;&|"))
+    {
+      int peek = string[i + 1];
+
+      if (peek == string[i])
+	{
+	  if (peek == '<' && string[i + 2] == '-')
+	    i++;
+	  else if (peek == '<' && string[i + 2] == '<')
+	    i++;
+	  i += 2;
+	  return i;
+	}
+      else if (peek == '&' && (string[i] == '>' || string[i] == '<'))
+	{
+	  j = i + 2;
+	  while (string[j] && ISDIGIT (string[j]))	/* file descriptor */
+	    j++;
+	  if (string[j] =='-')		/* <&[digits]-, >&[digits]- */
+	    j++;
+	  return j;
+	}
+      else if ((peek == '>' && string[i] == '&') || (peek == '|' && string[i] == '>'))
+	{
+	  i += 2;
+	  return i;
+	}
+      /* XXX - process substitution -- separated out for later -- bash-4.2 */
+      else if (peek == '(' && (string[i] == '>' || string[i] == '<')) /*)*/
+	{
+	  i += 2;
+	  delimopen = '(';
+	  delimiter = ')';
+	  nestdelim = 1;
+	  goto get_word;
+	}
+
+      i++;
+      return i;
+    }
+
+get_word:
+  /* Get word from string + i; */
+
+  if (delimiter == 0 && member (string[i], HISTORY_QUOTE_CHARACTERS))
+    delimiter = string[i++];
+
+  for (; string[i]; i++)
+    {
+      if (string[i] == '\\' && string[i + 1] == '\n')
+	{
+	  i++;
+	  continue;
+	}
+
+      if (string[i] == '\\' && delimiter != '\'' &&
+	  (delimiter != '"' || member (string[i], slashify_in_quotes)))
+	{
+	  i++;
+	  continue;
+	}
+
+      /* delimiter must be set and set to something other than a quote if
+	 nestdelim is set, so these tests are safe. */
+      if (nestdelim && string[i] == delimopen)
+	{
+	  nestdelim++;
+	  continue;
+	}
+      if (nestdelim && string[i] == delimiter)
+	{
+	  nestdelim--;
+	  if (nestdelim == 0)
+	    delimiter = 0;
+	  continue;
+	}
+      
+      if (delimiter && string[i] == delimiter)
+	{
+	  delimiter = 0;
+	  continue;
+	}
+
+      /* Command and process substitution; shell extended globbing patterns */
+      if (nestdelim == 0 && delimiter == 0 && member (string[i], "<>$!@?+*") && string[i+1] == '(') /*)*/
+	{
+	  i += 2;
+	  delimopen = '(';
+	  delimiter = ')';
+	  nestdelim = 1;
+	  continue;
+	}
+      
+      if (delimiter == 0 && (member (string[i], history_word_delimiters)))
+	break;
+
+      if (delimiter == 0 && member (string[i], HISTORY_QUOTE_CHARACTERS))
+	delimiter = string[i];
+    }
+
+  return i;
+}
+
+static char *
+history_substring (const char *string, int start, int end)
+{
+  register int len;
+  register char *result;
+
+  len = end - start;
+  result = (char *)xmalloc (len + 1);
+  strncpy (result, string + start, len);
+  result[len] = '\0';
+  return result;
+}
+
+/* Parse STRING into tokens and return an array of strings.  If WIND is
+   not -1 and INDP is not null, we also want the word surrounding index
+   WIND.  The position in the returned array of strings is returned in
+   *INDP. */
+static char **
+history_tokenize_internal (const char *string, int wind, int *indp)
+{
+  char **result;
+  register int i, start, result_index, size;
+
+  /* If we're searching for a string that's not part of a word (e.g., " "),
+     make sure we set *INDP to a reasonable value. */
+  if (indp && wind != -1)
+    *indp = -1;
+
+  /* Get a token, and stuff it into RESULT.  The tokens are split
+     exactly where the shell would split them. */
+  for (i = result_index = size = 0, result = (char **)NULL; string[i]; )
+    {
+      /* Skip leading whitespace. */
+      for (; string[i] && fielddelim (string[i]); i++)
+	;
+      if (string[i] == 0 || string[i] == history_comment_char)
+	return (result);
+
+      start = i;
+
+      i = history_tokenize_word (string, start);
+
+      /* If we have a non-whitespace delimiter character (which would not be
+	 skipped by the loop above), use it and any adjacent delimiters to
+	 make a separate field.  Any adjacent white space will be skipped the
+	 next time through the loop. */
+      if (i == start && history_word_delimiters)
+	{
+	  i++;
+	  while (string[i] && member (string[i], history_word_delimiters))
+	    i++;
+	}
+
+      /* If we are looking for the word in which the character at a
+	 particular index falls, remember it. */
+      if (indp && wind != -1 && wind >= start && wind < i)
+        *indp = result_index;
+
+      if (result_index + 2 >= size)
+	result = (char **)xrealloc (result, ((size += 10) * sizeof (char *)));
+
+      result[result_index++] = history_substring (string, start, i);
+      result[result_index] = (char *)NULL;
+    }
+
+  return (result);
+}
+
+/* Return an array of tokens, much as the shell might.  The tokens are
+   parsed out of STRING. */
+char **
+history_tokenize (const char *string)
+{
+  return (history_tokenize_internal (string, -1, (int *)NULL));
+}
+
+/* Free members of WORDS from START to an empty string */
+static void
+freewords (char **words, int start)
+{
+  register int i;
+
+  for (i = start; words[i]; i++)
+    xfree (words[i]);
+}
+
+/* Find and return the word which contains the character at index IND
+   in the history line LINE.  Used to save the word matched by the
+   last history !?string? search. */
+static char *
+history_find_word (char *line, int ind)
+{
+  char **words, *s;
+  int i, wind;
+
+  words = history_tokenize_internal (line, ind, &wind);
+  if (wind == -1 || words == 0)
+    {
+      if (words)
+	freewords (words, 0);
+      FREE (words);
+      return ((char *)NULL);
+    }
+  s = words[wind];
+  for (i = 0; i < wind; i++)
+    xfree (words[i]);
+  freewords (words, wind + 1);
+  xfree (words);
+  return s;
+}
diff --git a/lib/readline/histfile.c b/lib/readline/histfile.c
new file mode 100644
index 0000000..f0fa5ce
--- /dev/null
+++ b/lib/readline/histfile.c
@@ -0,0 +1,835 @@
+/* histfile.c - functions to manipulate the history file. */
+
+/* Copyright (C) 1989-2019 Free Software Foundation, Inc.
+
+   This file contains the GNU History Library (History), a set of
+   routines for managing the text of previously typed lines.
+
+   History is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   History is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with History.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* The goal is to make the implementation transparent, so that you
+   don't have to know what data types are used, just what functions
+   you can call.  I think I have done that. */
+
+#define READLINE_LIBRARY
+
+#if defined (__TANDEM)
+#  define _XOPEN_SOURCE_EXTENDED 1
+#  include <unistd.h>
+#  include <floss.h>
+#endif
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <stdio.h>
+
+#if defined (HAVE_LIMITS_H)
+#  include <limits.h>
+#endif
+
+#include <sys/types.h>
+#if ! defined (_MINIX) && defined (HAVE_SYS_FILE_H)
+#  include <sys/file.h>
+#endif
+#include "posixstat.h"
+#include <fcntl.h>
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <ctype.h>
+
+#if defined (__EMX__)
+#  undef HAVE_MMAP
+#endif
+
+#ifdef HISTORY_USE_MMAP
+#  include <sys/mman.h>
+
+#  ifdef MAP_FILE
+#    define MAP_RFLAGS	(MAP_FILE|MAP_PRIVATE)
+#    define MAP_WFLAGS	(MAP_FILE|MAP_SHARED)
+#  else
+#    define MAP_RFLAGS	MAP_PRIVATE
+#    define MAP_WFLAGS	MAP_SHARED
+#  endif
+
+#  ifndef MAP_FAILED
+#    define MAP_FAILED	((void *)-1)
+#  endif
+
+#endif /* HISTORY_USE_MMAP */
+
+#if defined(_WIN32)
+#  define WIN32_LEAN_AND_MEAN
+#  include <windows.h>
+#endif
+
+/* If we're compiling for __EMX__ (OS/2) or __CYGWIN__ (cygwin32 environment
+   on win 95/98/nt), we want to open files with O_BINARY mode so that there
+   is no \n -> \r\n conversion performed.  On other systems, we don't want to
+   mess around with O_BINARY at all, so we ensure that it's defined to 0. */
+#if defined (__EMX__) || defined (__CYGWIN__)
+#  ifndef O_BINARY
+#    define O_BINARY 0
+#  endif
+#else /* !__EMX__ && !__CYGWIN__ */
+#  undef O_BINARY
+#  define O_BINARY 0
+#endif /* !__EMX__ && !__CYGWIN__ */
+
+#include <errno.h>
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+#include "history.h"
+#include "histlib.h"
+
+#include "rlshell.h"
+#include "xmalloc.h"
+
+#if !defined (PATH_MAX)
+#  define PATH_MAX	1024	/* default */
+#endif
+
+extern void _hs_append_history_line PARAMS((int, const char *));
+
+/* history file version; currently unused */
+int history_file_version = 1;
+
+/* If non-zero, we write timestamps to the history file in history_do_write() */
+int history_write_timestamps = 0;
+
+/* If non-zero, we assume that a history file that starts with a timestamp
+   uses timestamp-delimited entries and can include multi-line history
+   entries. Used by read_history_range */
+int history_multiline_entries = 0;
+
+/* Immediately after a call to read_history() or read_history_range(), this
+   will return the number of lines just read from the history file in that
+   call. */
+int history_lines_read_from_file = 0;
+
+/* Immediately after a call to write_history() or history_do_write(), this
+   will return the number of lines just written to the history file in that
+   call.  This also works with history_truncate_file. */
+int history_lines_written_to_file = 0;
+
+/* Does S look like the beginning of a history timestamp entry?  Placeholder
+   for more extensive tests. */
+#define HIST_TIMESTAMP_START(s)		(*(s) == history_comment_char && isdigit ((unsigned char)(s)[1]) )
+
+static char *history_backupfile PARAMS((const char *));
+static char *history_tempfile PARAMS((const char *));
+static int histfile_backup PARAMS((const char *, const char *));
+static int histfile_restore PARAMS((const char *, const char *));
+static int history_rename PARAMS((const char *, const char *));
+
+/* Return the string that should be used in the place of this
+   filename.  This only matters when you don't specify the
+   filename to read_history (), or write_history (). */
+static char *
+history_filename (const char *filename)
+{
+  char *return_val;
+  const char *home;
+  int home_len;
+
+  return_val = filename ? savestring (filename) : (char *)NULL;
+
+  if (return_val)
+    return (return_val);
+  
+  home = sh_get_env_value ("HOME");
+#if defined (_WIN32)
+  if (home == 0)
+    home = sh_get_env_value ("APPDATA");
+#endif
+
+  if (home == 0)
+    return (NULL);
+  else
+    home_len = strlen (home);
+
+  return_val = (char *)xmalloc (2 + home_len + 8); /* strlen(".history") == 8 */
+  strcpy (return_val, home);
+  return_val[home_len] = '/';
+#if defined (__MSDOS__)
+  strcpy (return_val + home_len + 1, "_history");
+#else
+  strcpy (return_val + home_len + 1, ".history");
+#endif
+
+  return (return_val);
+}
+
+static char *
+history_backupfile (const char *filename)
+{
+  const char *fn;
+  char *ret, linkbuf[PATH_MAX+1];
+  size_t len;
+  ssize_t n;
+  struct stat fs;
+
+  fn = filename;  
+#if defined (HAVE_READLINK)
+  /* Follow symlink to avoid backing up symlink itself; call will fail if
+     not a symlink */
+  if ((n = readlink (filename, linkbuf, sizeof (linkbuf) - 1)) > 0)
+    {
+      linkbuf[n] = '\0';
+      fn = linkbuf;
+    }
+#endif
+      
+  len = strlen (fn);
+  ret = xmalloc (len + 2);
+  strcpy (ret, fn);
+  ret[len] = '-';
+  ret[len+1] = '\0';
+  return ret;
+}
+  
+static char *
+history_tempfile (const char *filename)
+{
+  const char *fn;
+  char *ret, linkbuf[PATH_MAX+1];
+  size_t len;
+  ssize_t n;
+  struct stat fs;
+  int pid;
+
+  fn = filename;  
+#if defined (HAVE_READLINK)
+  /* Follow symlink so tempfile created in the same directory as any symlinked
+     history file; call will fail if not a symlink */
+  if ((n = readlink (filename, linkbuf, sizeof (linkbuf) - 1)) > 0)
+    {
+      linkbuf[n] = '\0';
+      fn = linkbuf;
+    }
+#endif
+      
+  len = strlen (fn);
+  ret = xmalloc (len + 11);
+  strcpy (ret, fn);
+
+  pid = (int)getpid ();
+
+  /* filename-PID.tmp */
+  ret[len] = '-';
+  ret[len+1] = (pid / 10000 % 10) + '0';
+  ret[len+2] = (pid / 1000 % 10) + '0';
+  ret[len+3] = (pid / 100 % 10) + '0';
+  ret[len+4] = (pid / 10 % 10) + '0';
+  ret[len+5] = (pid % 10) + '0';
+  strcpy (ret + len + 6, ".tmp");
+
+  return ret;
+}
+  
+/* Add the contents of FILENAME to the history list, a line at a time.
+   If FILENAME is NULL, then read from ~/.history.  Returns 0 if
+   successful, or errno if not. */
+int
+read_history (const char *filename)
+{
+  return (read_history_range (filename, 0, -1));
+}
+
+/* Read a range of lines from FILENAME, adding them to the history list.
+   Start reading at the FROM'th line and end at the TO'th.  If FROM
+   is zero, start at the beginning.  If TO is less than FROM, read
+   until the end of the file.  If FILENAME is NULL, then read from
+   ~/.history.  Returns 0 if successful, or errno if not. */
+int
+read_history_range (const char *filename, int from, int to)
+{
+  register char *line_start, *line_end, *p;
+  char *input, *buffer, *bufend, *last_ts;
+  int file, current_line, chars_read, has_timestamps, reset_comment_char;
+  struct stat finfo;
+  size_t file_size;
+#if defined (EFBIG)
+  int overflow_errno = EFBIG;
+#elif defined (EOVERFLOW)
+  int overflow_errno = EOVERFLOW;
+#else
+  int overflow_errno = EIO;
+#endif
+
+  history_lines_read_from_file = 0;
+
+  buffer = last_ts = (char *)NULL;
+  input = history_filename (filename);
+  file = input ? open (input, O_RDONLY|O_BINARY, 0666) : -1;
+
+  if ((file < 0) || (fstat (file, &finfo) == -1))
+    goto error_and_exit;
+
+  if (S_ISREG (finfo.st_mode) == 0)
+    {
+#ifdef EFTYPE
+      errno = EFTYPE;
+#else
+      errno = EINVAL;
+#endif
+      goto error_and_exit;
+    }
+
+  file_size = (size_t)finfo.st_size;
+
+  /* check for overflow on very large files */
+  if (file_size != finfo.st_size || file_size + 1 < file_size)
+    {
+      errno = overflow_errno;
+      goto error_and_exit;
+    }
+
+  if (file_size == 0)
+    {
+      free (input);
+      close (file);
+      return 0;	/* don't waste time if we don't have to */
+    }
+
+#ifdef HISTORY_USE_MMAP
+  /* We map read/write and private so we can change newlines to NULs without
+     affecting the underlying object. */
+  buffer = (char *)mmap (0, file_size, PROT_READ|PROT_WRITE, MAP_RFLAGS, file, 0);
+  if ((void *)buffer == MAP_FAILED)
+    {
+      errno = overflow_errno;
+      goto error_and_exit;
+    }
+  chars_read = file_size;
+#else
+  buffer = (char *)malloc (file_size + 1);
+  if (buffer == 0)
+    {
+      errno = overflow_errno;
+      goto error_and_exit;
+    }
+
+  chars_read = read (file, buffer, file_size);
+#endif
+  if (chars_read < 0)
+    {
+  error_and_exit:
+      if (errno != 0)
+	chars_read = errno;
+      else
+	chars_read = EIO;
+      if (file >= 0)
+	close (file);
+
+      FREE (input);
+#ifndef HISTORY_USE_MMAP
+      FREE (buffer);
+#endif
+
+      return (chars_read);
+    }
+
+  close (file);
+
+  /* Set TO to larger than end of file if negative. */
+  if (to < 0)
+    to = chars_read;
+
+  /* Start at beginning of file, work to end. */
+  bufend = buffer + chars_read;
+  *bufend = '\0';		/* null-terminate buffer for timestamp checks */
+  current_line = 0;
+
+  /* Heuristic: the history comment character rarely changes, so assume we
+     have timestamps if the buffer starts with `#[:digit:]' and temporarily
+     set history_comment_char so timestamp parsing works right */
+  reset_comment_char = 0;
+  if (history_comment_char == '\0' && buffer[0] == '#' && isdigit ((unsigned char)buffer[1]))
+    {
+      history_comment_char = '#';
+      reset_comment_char = 1;
+    }
+
+  has_timestamps = HIST_TIMESTAMP_START (buffer);
+  history_multiline_entries += has_timestamps && history_write_timestamps;
+
+  /* Skip lines until we are at FROM. */
+  if (has_timestamps)
+    last_ts = buffer;
+  for (line_start = line_end = buffer; line_end < bufend && current_line < from; line_end++)
+    if (*line_end == '\n')
+      {
+      	p = line_end + 1;
+      	/* If we see something we think is a timestamp, continue with this
+	   line.  We should check more extensively here... */
+	if (HIST_TIMESTAMP_START(p) == 0)
+	  current_line++;
+	else
+	  last_ts = p;
+	line_start = p;
+	/* If we are at the last line (current_line == from) but we have
+	   timestamps (has_timestamps), then line_start points to the
+	   text of the last command, and we need to skip to its end. */
+	if (current_line >= from && has_timestamps)
+	  {
+	    for (line_end = p; line_end < bufend && *line_end != '\n'; line_end++)
+	      ;
+	    line_start = (*line_end == '\n') ? line_end + 1 : line_end;
+	  }
+      }
+
+  /* If there are lines left to gobble, then gobble them now. */
+  for (line_end = line_start; line_end < bufend; line_end++)
+    if (*line_end == '\n')
+      {
+	/* Change to allow Windows-like \r\n end of line delimiter. */
+	if (line_end > line_start && line_end[-1] == '\r')
+	  line_end[-1] = '\0';
+	else
+	  *line_end = '\0';
+
+	if (*line_start)
+	  {
+	    if (HIST_TIMESTAMP_START(line_start) == 0)
+	      {
+	      	if (last_ts == NULL && history_length > 0 && history_multiline_entries)
+		  _hs_append_history_line (history_length - 1, line_start);
+		else
+		  add_history (line_start);
+		if (last_ts)
+		  {
+		    add_history_time (last_ts);
+		    last_ts = NULL;
+		  }
+	      }
+	    else
+	      {
+		last_ts = line_start;
+		current_line--;
+	      }
+	  }
+
+	current_line++;
+
+	if (current_line >= to)
+	  break;
+
+	line_start = line_end + 1;
+      }
+
+  history_lines_read_from_file = current_line;
+  if (reset_comment_char)
+    history_comment_char = '\0';
+
+  FREE (input);
+#ifndef HISTORY_USE_MMAP
+  FREE (buffer);
+#else
+  munmap (buffer, file_size);
+#endif
+
+  return (0);
+}
+
+/* We need a special version for WIN32 because Windows rename() refuses to
+   overwrite an existing file. */
+static int
+history_rename (const char *old, const char *new)
+{
+#if defined (_WIN32)
+  return (MoveFileEx (old, new, MOVEFILE_REPLACE_EXISTING) == 0 ? -1 : 0);
+#else
+  return (rename (old, new));
+#endif
+}
+
+/* Save FILENAME to BACK, handling case where FILENAME is a symlink
+   (e.g., ~/.bash_history -> .histfiles/.bash_history.$HOSTNAME) */
+static int
+histfile_backup (const char *filename, const char *back)
+{
+#if defined (HAVE_READLINK)
+  char linkbuf[PATH_MAX+1];
+  ssize_t n;
+
+  /* Follow to target of symlink to avoid renaming symlink itself */
+  if ((n = readlink (filename, linkbuf, sizeof (linkbuf) - 1)) > 0)
+    {
+      linkbuf[n] = '\0';
+      return (history_rename (linkbuf, back));
+    }
+#endif
+  return (history_rename (filename, back));
+}
+
+/* Restore ORIG from BACKUP handling case where ORIG is a symlink
+   (e.g., ~/.bash_history -> .histfiles/.bash_history.$HOSTNAME) */
+static int
+histfile_restore (const char *backup, const char *orig)
+{
+#if defined (HAVE_READLINK)
+  char linkbuf[PATH_MAX+1];
+  ssize_t n;
+
+  /* Follow to target of symlink to avoid renaming symlink itself */
+  if ((n = readlink (orig, linkbuf, sizeof (linkbuf) - 1)) > 0)
+    {
+      linkbuf[n] = '\0';
+      return (history_rename (backup, linkbuf));
+    }
+#endif
+  return (history_rename (backup, orig));
+}
+
+/* Should we call chown, based on whether finfo and nfinfo describe different
+   files with different owners? */
+
+#define SHOULD_CHOWN(finfo, nfinfo) \
+  (finfo.st_uid != nfinfo.st_uid || finfo.st_gid != nfinfo.st_gid)
+  
+/* Truncate the history file FNAME, leaving only LINES trailing lines.
+   If FNAME is NULL, then use ~/.history.  Writes a new file and renames
+   it to the original name.  Returns 0 on success, errno on failure. */
+int
+history_truncate_file (const char *fname, int lines)
+{
+  char *buffer, *filename, *tempname, *bp, *bp1;		/* bp1 == bp+1 */
+  int file, chars_read, rv, orig_lines, exists, r;
+  struct stat finfo, nfinfo;
+  size_t file_size;
+
+  history_lines_written_to_file = 0;
+
+  buffer = (char *)NULL;
+  filename = history_filename (fname);
+  tempname = 0;
+  file = filename ? open (filename, O_RDONLY|O_BINARY, 0666) : -1;
+  rv = exists = 0;
+
+  /* Don't try to truncate non-regular files. */
+  if (file == -1 || fstat (file, &finfo) == -1)
+    {
+      rv = errno;
+      if (file != -1)
+	close (file);
+      goto truncate_exit;
+    }
+  exists = 1;
+
+  nfinfo.st_uid = finfo.st_uid;
+  nfinfo.st_gid = finfo.st_gid;
+
+  if (S_ISREG (finfo.st_mode) == 0)
+    {
+      close (file);
+#ifdef EFTYPE
+      rv = EFTYPE;
+#else
+      rv = EINVAL;
+#endif
+      goto truncate_exit;
+    }
+
+  file_size = (size_t)finfo.st_size;
+
+  /* check for overflow on very large files */
+  if (file_size != finfo.st_size || file_size + 1 < file_size)
+    {
+      close (file);
+#if defined (EFBIG)
+      rv = errno = EFBIG;
+#elif defined (EOVERFLOW)
+      rv = errno = EOVERFLOW;
+#else
+      rv = errno = EINVAL;
+#endif
+      goto truncate_exit;
+    }
+
+  buffer = (char *)malloc (file_size + 1);
+  if (buffer == 0)
+    {
+      rv = errno;
+      close (file);
+      goto truncate_exit;
+    }
+
+  chars_read = read (file, buffer, file_size);
+  close (file);
+
+  if (chars_read <= 0)
+    {
+      rv = (chars_read < 0) ? errno : 0;
+      goto truncate_exit;
+    }
+
+  orig_lines = lines;
+  /* Count backwards from the end of buffer until we have passed
+     LINES lines.  bp1 is set funny initially.  But since bp[1] can't
+     be a comment character (since it's off the end) and *bp can't be
+     both a newline and the history comment character, it should be OK. */
+  for (bp1 = bp = buffer + chars_read - 1; lines && bp > buffer; bp--)
+    {
+      if (*bp == '\n' && HIST_TIMESTAMP_START(bp1) == 0)
+	lines--;
+      bp1 = bp;
+    }
+
+  /* If this is the first line, then the file contains exactly the
+     number of lines we want to truncate to, so we don't need to do
+     anything.  It's the first line if we don't find a newline between
+     the current value of i and 0.  Otherwise, write from the start of
+     this line until the end of the buffer. */
+  for ( ; bp > buffer; bp--)
+    {
+      if (*bp == '\n' && HIST_TIMESTAMP_START(bp1) == 0)
+        {
+	  bp++;
+	  break;
+        }
+      bp1 = bp;
+    }
+
+  /* Write only if there are more lines in the file than we want to
+     truncate to. */
+  if (bp <= buffer)
+    {
+      rv = 0;
+      /* No-op if LINES == 0 at this point */
+      history_lines_written_to_file = orig_lines - lines;
+      goto truncate_exit;
+    }
+
+  tempname = history_tempfile (filename);
+
+  if ((file = open (tempname, O_WRONLY|O_CREAT|O_TRUNC|O_BINARY, 0600)) != -1)
+    {
+      if (write (file, bp, chars_read - (bp - buffer)) < 0)
+	rv = errno;
+
+      if (fstat (file, &nfinfo) < 0 && rv == 0)
+	rv = errno;
+
+      if (close (file) < 0 && rv == 0)
+	rv = errno;
+    }
+  else
+    rv = errno;
+
+ truncate_exit:
+  FREE (buffer);
+
+  history_lines_written_to_file = orig_lines - lines;
+
+  if (rv == 0 && filename && tempname)
+    rv = histfile_restore (tempname, filename);
+
+  if (rv != 0)
+    {
+      rv = errno;
+      if (tempname)
+	unlink (tempname);
+      history_lines_written_to_file = 0;
+    }
+
+#if defined (HAVE_CHOWN)
+  /* Make sure the new filename is owned by the same user as the old.  If one
+     user is running this, it's a no-op.  If the shell is running after sudo
+     with a shared history file, we don't want to leave the history file
+     owned by root. */
+  if (rv == 0 && exists && SHOULD_CHOWN (finfo, nfinfo))
+    r = chown (filename, finfo.st_uid, finfo.st_gid);
+#endif
+
+  xfree (filename);
+  FREE (tempname);
+
+  return rv;
+}
+
+/* Workhorse function for writing history.  Writes the last NELEMENT entries
+   from the history list to FILENAME.  OVERWRITE is non-zero if you
+   wish to replace FILENAME with the entries. */
+static int
+history_do_write (const char *filename, int nelements, int overwrite)
+{
+  register int i;
+  char *output, *tempname, *histname;
+  int file, mode, rv, exists;
+  struct stat finfo, nfinfo;
+#ifdef HISTORY_USE_MMAP
+  size_t cursize;
+
+  history_lines_written_to_file = 0;
+
+  mode = overwrite ? O_RDWR|O_CREAT|O_TRUNC|O_BINARY : O_RDWR|O_APPEND|O_BINARY;
+#else
+  mode = overwrite ? O_WRONLY|O_CREAT|O_TRUNC|O_BINARY : O_WRONLY|O_APPEND|O_BINARY;
+#endif
+  histname = history_filename (filename);
+  exists = histname ? (stat (histname, &finfo) == 0) : 0;
+
+  tempname = (overwrite && exists && S_ISREG (finfo.st_mode)) ? history_tempfile (histname) : 0;
+  output = tempname ? tempname : histname;
+
+  file = output ? open (output, mode, 0600) : -1;
+  rv = 0;
+
+  if (file == -1)
+    {
+      rv = errno;
+      FREE (histname);
+      FREE (tempname);
+      return (rv);
+    }
+
+#ifdef HISTORY_USE_MMAP
+  cursize = overwrite ? 0 : lseek (file, 0, SEEK_END);
+#endif
+
+  if (nelements > history_length)
+    nelements = history_length;
+
+  /* Build a buffer of all the lines to write, and write them in one syscall.
+     Suggested by Peter Ho (peter@robosts.oxford.ac.uk). */
+  {
+    HIST_ENTRY **the_history;	/* local */
+    register int j;
+    int buffer_size;
+    char *buffer;
+
+    the_history = history_list ();
+    /* Calculate the total number of bytes to write. */
+    for (buffer_size = 0, i = history_length - nelements; i < history_length; i++)
+      {
+	if (history_write_timestamps && the_history[i]->timestamp && the_history[i]->timestamp[0])
+	  buffer_size += strlen (the_history[i]->timestamp) + 1;
+	buffer_size += strlen (the_history[i]->line) + 1;
+      }
+
+    /* Allocate the buffer, and fill it. */
+#ifdef HISTORY_USE_MMAP
+    if (ftruncate (file, buffer_size+cursize) == -1)
+      goto mmap_error;
+    buffer = (char *)mmap (0, buffer_size, PROT_READ|PROT_WRITE, MAP_WFLAGS, file, cursize);
+    if ((void *)buffer == MAP_FAILED)
+      {
+mmap_error:
+	rv = errno;
+	close (file);
+	if (tempname)
+	  unlink (tempname);
+	FREE (histname);
+	FREE (tempname);
+	return rv;
+      }
+#else    
+    buffer = (char *)malloc (buffer_size);
+    if (buffer == 0)
+      {
+      	rv = errno;
+	close (file);
+	if (tempname)
+	  unlink (tempname);
+	FREE (histname);
+	FREE (tempname);
+	return rv;
+      }
+#endif
+
+    for (j = 0, i = history_length - nelements; i < history_length; i++)
+      {
+	if (history_write_timestamps && the_history[i]->timestamp && the_history[i]->timestamp[0])
+	  {
+	    strcpy (buffer + j, the_history[i]->timestamp);
+	    j += strlen (the_history[i]->timestamp);
+	    buffer[j++] = '\n';
+	  }
+	strcpy (buffer + j, the_history[i]->line);
+	j += strlen (the_history[i]->line);
+	buffer[j++] = '\n';
+      }
+
+#ifdef HISTORY_USE_MMAP
+    if (msync (buffer, buffer_size, MS_ASYNC) != 0 || munmap (buffer, buffer_size) != 0)
+      rv = errno;
+#else
+    if (write (file, buffer, buffer_size) < 0)
+      rv = errno;
+    xfree (buffer);
+#endif
+  }
+
+  history_lines_written_to_file = nelements;
+
+  if (close (file) < 0 && rv == 0)
+    rv = errno;
+
+  if (rv == 0 && histname && tempname)
+    rv = histfile_restore (tempname, histname);
+
+  if (rv != 0)
+    {
+      rv = errno;
+      if (tempname)
+	unlink (tempname);
+      history_lines_written_to_file = 0;
+    }
+
+#if defined (HAVE_CHOWN)
+  /* Make sure the new filename is owned by the same user as the old.  If one
+     user is running this, it's a no-op.  If the shell is running after sudo
+     with a shared history file, we don't want to leave the history file
+     owned by root. */
+  if (rv == 0 && exists)
+    mode = chown (histname, finfo.st_uid, finfo.st_gid);
+#endif
+
+  FREE (histname);
+  FREE (tempname);
+
+  return (rv);
+}
+
+/* Append NELEMENT entries to FILENAME.  The entries appended are from
+   the end of the list minus NELEMENTs up to the end of the list. */
+int
+append_history (int nelements, const char *filename)
+{
+  return (history_do_write (filename, nelements, HISTORY_APPEND));
+}
+
+/* Overwrite FILENAME with the current history.  If FILENAME is NULL,
+   then write the history list to ~/.history.  Values returned
+   are as in read_history ().*/
+int
+write_history (const char *filename)
+{
+  return (history_do_write (filename, history_length, HISTORY_OVERWRITE));
+}
diff --git a/lib/readline/histlib.h b/lib/readline/histlib.h
new file mode 100644
index 0000000..9627b24
--- /dev/null
+++ b/lib/readline/histlib.h
@@ -0,0 +1,85 @@
+/* histlib.h -- internal definitions for the history library. */
+
+/* Copyright (C) 1989-2009 Free Software Foundation, Inc.
+
+   This file contains the GNU History Library (History), a set of
+   routines for managing the text of previously typed lines.
+
+   History is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   History is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with History.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_HISTLIB_H_)
+#define _HISTLIB_H_
+
+#if defined (HAVE_STRING_H)
+#  include <string.h>
+#else
+#  include <strings.h>
+#endif /* !HAVE_STRING_H */
+
+#if !defined (STREQ)
+#define STREQ(a, b)	(((a)[0] == (b)[0]) && (strcmp ((a), (b)) == 0))
+#define STREQN(a, b, n) (((n) == 0) ? (1) \
+				    : ((a)[0] == (b)[0]) && (strncmp ((a), (b), (n)) == 0))
+#endif
+
+#ifndef savestring
+#define savestring(x) strcpy (xmalloc (1 + strlen (x)), (x))
+#endif
+
+#ifndef whitespace
+#define whitespace(c) (((c) == ' ') || ((c) == '\t'))
+#endif
+
+#ifndef _rl_digit_p
+#define _rl_digit_p(c)  ((c) >= '0' && (c) <= '9')
+#endif
+
+#ifndef _rl_digit_value
+#define _rl_digit_value(c) ((c) - '0')
+#endif
+
+#ifndef member
+#  if !defined (strchr) && !defined (__STDC__)
+extern char *strchr ();
+#  endif /* !strchr && !__STDC__ */
+#define member(c, s) ((c) ? ((char *)strchr ((s), (c)) != (char *)NULL) : 0)
+#endif
+
+#ifndef FREE
+#  define FREE(x)	if (x) free (x)
+#endif
+
+/* Possible history errors passed to hist_error. */
+#define EVENT_NOT_FOUND 0
+#define BAD_WORD_SPEC	1
+#define SUBST_FAILED	2
+#define BAD_MODIFIER	3
+#define NO_PREV_SUBST	4
+
+/* Possible definitions for history starting point specification. */
+#define NON_ANCHORED_SEARCH	0
+#define ANCHORED_SEARCH		0x01
+#define PATTERN_SEARCH		0x02
+
+/* Possible definitions for what style of writing the history file we want. */
+#define HISTORY_APPEND 0
+#define HISTORY_OVERWRITE 1
+
+/* internal extern function declarations used by other parts of the library */
+
+/* histsearch.c */
+extern int _hs_history_patsearch PARAMS((const char *, int, int));
+
+#endif /* !_HISTLIB_H_ */
diff --git a/lib/readline/history.c b/lib/readline/history.c
new file mode 100644
index 0000000..67158b1
--- /dev/null
+++ b/lib/readline/history.c
@@ -0,0 +1,607 @@
+/* history.c -- standalone history library */
+
+/* Copyright (C) 1989-2017 Free Software Foundation, Inc.
+
+   This file contains the GNU History Library (History), a set of
+   routines for managing the text of previously typed lines.
+
+   History is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   History is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with History.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* The goal is to make the implementation transparent, so that you
+   don't have to know what data types are used, just what functions
+   you can call.  I think I have done that. */
+#define READLINE_LIBRARY
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <stdio.h>
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include <errno.h>
+
+#include "history.h"
+#include "histlib.h"
+
+#include "xmalloc.h"
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+/* How big to make the_history when we first allocate it. */
+#define DEFAULT_HISTORY_INITIAL_SIZE	502
+
+#define MAX_HISTORY_INITIAL_SIZE	8192
+
+/* The number of slots to increase the_history by. */
+#define DEFAULT_HISTORY_GROW_SIZE 50
+
+static char *hist_inittime PARAMS((void));
+
+/* **************************************************************** */
+/*								    */
+/*			History Functions			    */
+/*								    */
+/* **************************************************************** */
+
+/* An array of HIST_ENTRY.  This is where we store the history. */
+static HIST_ENTRY **the_history = (HIST_ENTRY **)NULL;
+
+/* Non-zero means that we have enforced a limit on the amount of
+   history that we save. */
+static int history_stifled;
+
+/* The current number of slots allocated to the input_history. */
+static int history_size;
+
+/* If HISTORY_STIFLED is non-zero, then this is the maximum number of
+   entries to remember. */
+int history_max_entries;
+int max_input_history;	/* backwards compatibility */
+
+/* The current location of the interactive history pointer.  Just makes
+   life easier for outside callers. */
+int history_offset;
+
+/* The number of strings currently stored in the history list. */
+int history_length;
+
+/* The logical `base' of the history array.  It defaults to 1. */
+int history_base = 1;
+
+/* Return the current HISTORY_STATE of the history. */
+HISTORY_STATE *
+history_get_history_state (void)
+{
+  HISTORY_STATE *state;
+
+  state = (HISTORY_STATE *)xmalloc (sizeof (HISTORY_STATE));
+  state->entries = the_history;
+  state->offset = history_offset;
+  state->length = history_length;
+  state->size = history_size;
+  state->flags = 0;
+  if (history_stifled)
+    state->flags |= HS_STIFLED;
+
+  return (state);
+}
+
+/* Set the state of the current history array to STATE. */
+void
+history_set_history_state (HISTORY_STATE *state)
+{
+  the_history = state->entries;
+  history_offset = state->offset;
+  history_length = state->length;
+  history_size = state->size;
+  if (state->flags & HS_STIFLED)
+    history_stifled = 1;
+}
+
+/* Begin a session in which the history functions might be used.  This
+   initializes interactive variables. */
+void
+using_history (void)
+{
+  history_offset = history_length;
+}
+
+/* Return the number of bytes that the primary history entries are using.
+   This just adds up the lengths of the_history->lines and the associated
+   timestamps. */
+int
+history_total_bytes (void)
+{
+  register int i, result;
+
+  for (i = result = 0; the_history && the_history[i]; i++)
+    result += HISTENT_BYTES (the_history[i]);
+
+  return (result);
+}
+
+/* Returns the magic number which says what history element we are
+   looking at now.  In this implementation, it returns history_offset. */
+int
+where_history (void)
+{
+  return (history_offset);
+}
+
+/* Make the current history item be the one at POS, an absolute index.
+   Returns zero if POS is out of range, else non-zero. */
+int
+history_set_pos (int pos)
+{
+  if (pos > history_length || pos < 0 || !the_history)
+    return (0);
+  history_offset = pos;
+  return (1);
+}
+ 
+/* Return the current history array.  The caller has to be careful, since this
+   is the actual array of data, and could be bashed or made corrupt easily.
+   The array is terminated with a NULL pointer. */
+HIST_ENTRY **
+history_list (void)
+{
+  return (the_history);
+}
+
+/* Return the history entry at the current position, as determined by
+   history_offset.  If there is no entry there, return a NULL pointer. */
+HIST_ENTRY *
+current_history (void)
+{
+  return ((history_offset == history_length) || the_history == 0)
+		? (HIST_ENTRY *)NULL
+		: the_history[history_offset];
+}
+
+/* Back up history_offset to the previous history entry, and return
+   a pointer to that entry.  If there is no previous entry then return
+   a NULL pointer. */
+HIST_ENTRY *
+previous_history (void)
+{
+  return history_offset ? the_history[--history_offset] : (HIST_ENTRY *)NULL;
+}
+
+/* Move history_offset forward to the next history entry, and return
+   a pointer to that entry.  If there is no next entry then return a
+   NULL pointer. */
+HIST_ENTRY *
+next_history (void)
+{
+  return (history_offset == history_length) ? (HIST_ENTRY *)NULL : the_history[++history_offset];
+}
+
+/* Return the history entry which is logically at OFFSET in the history array.
+   OFFSET is relative to history_base. */
+HIST_ENTRY *
+history_get (int offset)
+{
+  int local_index;
+
+  local_index = offset - history_base;
+  return (local_index >= history_length || local_index < 0 || the_history == 0)
+		? (HIST_ENTRY *)NULL
+		: the_history[local_index];
+}
+
+HIST_ENTRY *
+alloc_history_entry (char *string, char *ts)
+{
+  HIST_ENTRY *temp;
+
+  temp = (HIST_ENTRY *)xmalloc (sizeof (HIST_ENTRY));
+
+  temp->line = string ? savestring (string) : string;
+  temp->data = (char *)NULL;
+  temp->timestamp = ts;
+
+  return temp;
+}
+
+time_t
+history_get_time (HIST_ENTRY *hist)
+{
+  char *ts;
+  time_t t;
+
+  if (hist == 0 || hist->timestamp == 0)
+    return 0;
+  ts = hist->timestamp;
+  if (ts[0] != history_comment_char)
+    return 0;
+  errno = 0;
+  t = (time_t) strtol (ts + 1, (char **)NULL, 10);		/* XXX - should use strtol() here */
+  if (errno == ERANGE)
+    return (time_t)0;
+  return t;
+}
+
+static char *
+hist_inittime (void)
+{
+  time_t t;
+  char ts[64], *ret;
+
+  t = (time_t) time ((time_t *)0);
+#if defined (HAVE_VSNPRINTF)		/* assume snprintf if vsnprintf exists */
+  snprintf (ts, sizeof (ts) - 1, "X%lu", (unsigned long) t);
+#else
+  sprintf (ts, "X%lu", (unsigned long) t);
+#endif
+  ret = savestring (ts);
+  ret[0] = history_comment_char;
+
+  return ret;
+}
+
+/* Place STRING at the end of the history list.  The data field
+   is  set to NULL. */
+void
+add_history (const char *string)
+{
+  HIST_ENTRY *temp;
+  int new_length;
+
+  if (history_stifled && (history_length == history_max_entries))
+    {
+      register int i;
+
+      /* If the history is stifled, and history_length is zero,
+	 and it equals history_max_entries, we don't save items. */
+      if (history_length == 0)
+	return;
+
+      /* If there is something in the slot, then remove it. */
+      if (the_history[0])
+	(void) free_history_entry (the_history[0]);
+
+      /* Copy the rest of the entries, moving down one slot.  Copy includes
+	 trailing NULL.  */
+      memmove (the_history, the_history + 1, history_length * sizeof (HIST_ENTRY *));
+
+      new_length = history_length;
+      history_base++;
+    }
+  else
+    {
+      if (history_size == 0)
+	{
+	  if (history_stifled && history_max_entries > 0)
+	    history_size = (history_max_entries > MAX_HISTORY_INITIAL_SIZE)
+				? MAX_HISTORY_INITIAL_SIZE
+				: history_max_entries + 2;
+	  else
+	    history_size = DEFAULT_HISTORY_INITIAL_SIZE;
+	  the_history = (HIST_ENTRY **)xmalloc (history_size * sizeof (HIST_ENTRY *));
+	  new_length = 1;
+	}
+      else
+	{
+	  if (history_length == (history_size - 1))
+	    {
+	      history_size += DEFAULT_HISTORY_GROW_SIZE;
+	      the_history = (HIST_ENTRY **)
+		xrealloc (the_history, history_size * sizeof (HIST_ENTRY *));
+	    }
+	  new_length = history_length + 1;
+	}
+    }
+
+  temp = alloc_history_entry ((char *)string, hist_inittime ());
+
+  the_history[new_length] = (HIST_ENTRY *)NULL;
+  the_history[new_length - 1] = temp;
+  history_length = new_length;
+}
+
+/* Change the time stamp of the most recent history entry to STRING. */
+void
+add_history_time (const char *string)
+{
+  HIST_ENTRY *hs;
+
+  if (string == 0 || history_length < 1)
+    return;
+  hs = the_history[history_length - 1];
+  FREE (hs->timestamp);
+  hs->timestamp = savestring (string);
+}
+
+/* Free HIST and return the data so the calling application can free it
+   if necessary and desired. */
+histdata_t
+free_history_entry (HIST_ENTRY *hist)
+{
+  histdata_t x;
+
+  if (hist == 0)
+    return ((histdata_t) 0);
+  FREE (hist->line);
+  FREE (hist->timestamp);
+  x = hist->data;
+  xfree (hist);
+  return (x);
+}
+
+HIST_ENTRY *
+copy_history_entry (HIST_ENTRY *hist)
+{
+  HIST_ENTRY *ret;
+  char *ts;
+
+  if (hist == 0)
+    return hist;
+
+  ret = alloc_history_entry (hist->line, (char *)NULL);
+
+  ts = hist->timestamp ? savestring (hist->timestamp) : hist->timestamp;
+  ret->timestamp = ts;
+
+  ret->data = hist->data;
+
+  return ret;
+}
+  
+/* Make the history entry at WHICH have LINE and DATA.  This returns
+   the old entry so you can dispose of the data.  In the case of an
+   invalid WHICH, a NULL pointer is returned. */
+HIST_ENTRY *
+replace_history_entry (int which, const char *line, histdata_t data)
+{
+  HIST_ENTRY *temp, *old_value;
+
+  if (which < 0 || which >= history_length)
+    return ((HIST_ENTRY *)NULL);
+
+  temp = (HIST_ENTRY *)xmalloc (sizeof (HIST_ENTRY));
+  old_value = the_history[which];
+
+  temp->line = savestring (line);
+  temp->data = data;
+  temp->timestamp = savestring (old_value->timestamp);
+  the_history[which] = temp;
+
+  return (old_value);
+}
+
+/* Append LINE to the history line at offset WHICH, adding a newline to the
+   end of the current line first.  This can be used to construct multi-line
+   history entries while reading lines from the history file. */
+void
+_hs_append_history_line (int which, const char *line)
+{
+  HIST_ENTRY *hent;
+  size_t newlen, curlen, minlen;
+  char *newline;
+
+  hent = the_history[which];
+  curlen = strlen (hent->line);
+  minlen = curlen + strlen (line) + 2;	/* min space needed */
+  if (curlen > 256)		/* XXX - for now */
+    {
+      newlen = 512;		/* now realloc in powers of 2 */
+      /* we recalcluate every time; the operations are cheap */
+      while (newlen < minlen)
+	newlen <<= 1;
+    }
+  else
+    newlen = minlen;
+  /* Assume that realloc returns the same pointer and doesn't try a new
+     alloc/copy if the new size is the same as the one last passed. */
+  newline = realloc (hent->line, newlen);
+  if (newline)
+    {
+      hent->line = newline;
+      hent->line[curlen++] = '\n';
+      strcpy (hent->line + curlen, line);
+    }
+}
+
+/* Replace the DATA in the specified history entries, replacing OLD with
+   NEW.  WHICH says which one(s) to replace:  WHICH == -1 means to replace
+   all of the history entries where entry->data == OLD; WHICH == -2 means
+   to replace the `newest' history entry where entry->data == OLD; and
+   WHICH >= 0 means to replace that particular history entry's data, as
+   long as it matches OLD. */
+void
+_hs_replace_history_data (int which, histdata_t *old, histdata_t *new)
+{
+  HIST_ENTRY *entry;
+  register int i, last;
+
+  if (which < -2 || which >= history_length || history_length == 0 || the_history == 0)
+    return;
+
+  if (which >= 0)
+    {
+      entry = the_history[which];
+      if (entry && entry->data == old)
+	entry->data = new;
+      return;
+    }
+
+  last = -1;
+  for (i = 0; i < history_length; i++)
+    {
+      entry = the_history[i];
+      if (entry == 0)
+	continue;
+      if (entry->data == old)
+	{
+	  last = i;
+	  if (which == -1)
+	    entry->data = new;
+	}
+    }
+  if (which == -2 && last >= 0)
+    {
+      entry = the_history[last];
+      entry->data = new;	/* XXX - we don't check entry->old */
+    }
+}      
+  
+/* Remove history element WHICH from the history.  The removed
+   element is returned to you so you can free the line, data,
+   and containing structure. */
+HIST_ENTRY *
+remove_history (int which)
+{
+  HIST_ENTRY *return_value;
+  register int i;
+#if 1
+  int nentries;
+  HIST_ENTRY **start, **end;
+#endif
+
+  if (which < 0 || which >= history_length || history_length ==  0 || the_history == 0)
+    return ((HIST_ENTRY *)NULL);
+
+  return_value = the_history[which];
+
+#if 1
+  /* Copy the rest of the entries, moving down one slot.  Copy includes
+     trailing NULL.  */
+  nentries = history_length - which;
+  start = the_history + which;
+  end = start + 1;
+  memmove (start, end, nentries * sizeof (HIST_ENTRY *));
+#else
+  for (i = which; i < history_length; i++)
+    the_history[i] = the_history[i + 1];
+#endif
+
+  history_length--;
+
+  return (return_value);
+}
+
+HIST_ENTRY **
+remove_history_range (int first, int last)
+{
+  HIST_ENTRY **return_value;
+  register int i;
+  int nentries;
+  HIST_ENTRY **start, **end;
+
+  if (the_history == 0 || history_length == 0)
+    return ((HIST_ENTRY **)NULL);
+  if (first < 0 || first >= history_length || last < 0 || last >= history_length)
+    return ((HIST_ENTRY **)NULL);
+  if (first > last)
+    return (HIST_ENTRY **)NULL;
+
+  nentries = last - first + 1;
+  return_value = (HIST_ENTRY **)malloc ((nentries + 1) * sizeof (HIST_ENTRY *));
+  if (return_value == 0)
+    return return_value;
+
+  /* Return all the deleted entries in a list */
+  for (i = first ; i <= last; i++)
+    return_value[i - first] = the_history[i];
+  return_value[i - first] = (HIST_ENTRY *)NULL;
+
+  /* Copy the rest of the entries, moving down NENTRIES slots.  Copy includes
+     trailing NULL.  */
+  start = the_history + first;
+  end = the_history + last + 1;
+  memmove (start, end, (history_length - last) * sizeof (HIST_ENTRY *));
+
+  history_length -= nentries;
+
+  return (return_value);
+}
+
+/* Stifle the history list, remembering only MAX number of lines. */
+void
+stifle_history (int max)
+{
+  register int i, j;
+
+  if (max < 0)
+    max = 0;
+
+  if (history_length > max)
+    {
+      /* This loses because we cannot free the data. */
+      for (i = 0, j = history_length - max; i < j; i++)
+	free_history_entry (the_history[i]);
+
+      history_base = i;
+      for (j = 0, i = history_length - max; j < max; i++, j++)
+	the_history[j] = the_history[i];
+      the_history[j] = (HIST_ENTRY *)NULL;
+      history_length = j;
+    }
+
+  history_stifled = 1;
+  max_input_history = history_max_entries = max;
+}
+
+/* Stop stifling the history.  This returns the previous maximum
+   number of history entries.  The value is positive if the history
+   was stifled, negative if it wasn't. */
+int
+unstifle_history (void)
+{
+  if (history_stifled)
+    {
+      history_stifled = 0;
+      return (history_max_entries);
+    }
+  else
+    return (-history_max_entries);
+}
+
+int
+history_is_stifled (void)
+{
+  return (history_stifled);
+}
+
+void
+clear_history (void)
+{
+  register int i;
+
+  /* This loses because we cannot free the data. */
+  for (i = 0; i < history_length; i++)
+    {
+      free_history_entry (the_history[i]);
+      the_history[i] = (HIST_ENTRY *)NULL;
+    }
+
+  history_offset = history_length = 0;
+  history_base = 1;		/* reset history base to default */
+}
diff --git a/lib/readline/history.h b/lib/readline/history.h
new file mode 100644
index 0000000..cc3de29
--- /dev/null
+++ b/lib/readline/history.h
@@ -0,0 +1,286 @@
+/* history.h -- the names of functions that you can call in history. */
+
+/* Copyright (C) 1989-2015 Free Software Foundation, Inc.
+
+   This file contains the GNU History Library (History), a set of
+   routines for managing the text of previously typed lines.
+
+   History is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   History is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with History.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _HISTORY_H_
+#define _HISTORY_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <time.h>		/* XXX - for history timestamp code */
+
+#if defined READLINE_LIBRARY
+#  include "rlstdc.h"
+#  include "rltypedefs.h"
+#else
+#  include <readline/rlstdc.h>
+#  include <readline/rltypedefs.h>
+#endif
+
+#ifdef __STDC__
+typedef void *histdata_t;
+#else
+typedef char *histdata_t;
+#endif
+
+/* The structure used to store a history entry. */
+typedef struct _hist_entry {
+  char *line;
+  char *timestamp;		/* char * rather than time_t for read/write */
+  histdata_t data;
+} HIST_ENTRY;
+
+/* Size of the history-library-managed space in history entry HS. */
+#define HISTENT_BYTES(hs)	(strlen ((hs)->line) + strlen ((hs)->timestamp))
+
+/* A structure used to pass the current state of the history stuff around. */
+typedef struct _hist_state {
+  HIST_ENTRY **entries;		/* Pointer to the entries themselves. */
+  int offset;			/* The location pointer within this array. */
+  int length;			/* Number of elements within this array. */
+  int size;			/* Number of slots allocated to this array. */
+  int flags;
+} HISTORY_STATE;
+
+/* Flag values for the `flags' member of HISTORY_STATE. */
+#define HS_STIFLED	0x01
+
+/* Initialization and state management. */
+
+/* Begin a session in which the history functions might be used.  This
+   just initializes the interactive variables. */
+extern void using_history PARAMS((void));
+
+/* Return the current HISTORY_STATE of the history. */
+extern HISTORY_STATE *history_get_history_state PARAMS((void));
+
+/* Set the state of the current history array to STATE. */
+extern void history_set_history_state PARAMS((HISTORY_STATE *));
+
+/* Manage the history list. */
+
+/* Place STRING at the end of the history list.
+   The associated data field (if any) is set to NULL. */
+extern void add_history PARAMS((const char *));
+
+/* Change the timestamp associated with the most recent history entry to
+   STRING. */
+extern void add_history_time PARAMS((const char *));
+
+/* Remove an entry from the history list.  WHICH is the magic number that
+   tells us which element to delete.  The elements are numbered from 0. */
+extern HIST_ENTRY *remove_history PARAMS((int));
+
+/* Remove a set of entries from the history list: FIRST to LAST, inclusive */
+extern HIST_ENTRY **remove_history_range PARAMS((int, int));
+
+/* Allocate a history entry consisting of STRING and TIMESTAMP and return
+   a pointer to it. */
+extern HIST_ENTRY *alloc_history_entry PARAMS((char *, char *));
+
+/* Copy the history entry H, but not the (opaque) data pointer */
+extern HIST_ENTRY *copy_history_entry PARAMS((HIST_ENTRY *));
+
+/* Free the history entry H and return any application-specific data
+   associated with it. */
+extern histdata_t free_history_entry PARAMS((HIST_ENTRY *));
+
+/* Make the history entry at WHICH have LINE and DATA.  This returns
+   the old entry so you can dispose of the data.  In the case of an
+   invalid WHICH, a NULL pointer is returned. */
+extern HIST_ENTRY *replace_history_entry PARAMS((int, const char *, histdata_t));
+
+/* Clear the history list and start over. */
+extern void clear_history PARAMS((void));
+
+/* Stifle the history list, remembering only MAX number of entries. */
+extern void stifle_history PARAMS((int));
+
+/* Stop stifling the history.  This returns the previous amount the
+   history was stifled by.  The value is positive if the history was
+   stifled, negative if it wasn't. */
+extern int unstifle_history PARAMS((void));
+
+/* Return 1 if the history is stifled, 0 if it is not. */
+extern int history_is_stifled PARAMS((void));
+
+/* Information about the history list. */
+
+/* Return a NULL terminated array of HIST_ENTRY which is the current input
+   history.  Element 0 of this list is the beginning of time.  If there
+   is no history, return NULL. */
+extern HIST_ENTRY **history_list PARAMS((void));
+
+/* Returns the number which says what history element we are now
+   looking at.  */
+extern int where_history PARAMS((void));
+  
+/* Return the history entry at the current position, as determined by
+   history_offset.  If there is no entry there, return a NULL pointer. */
+extern HIST_ENTRY *current_history PARAMS((void));
+
+/* Return the history entry which is logically at OFFSET in the history
+   array.  OFFSET is relative to history_base. */
+extern HIST_ENTRY *history_get PARAMS((int));
+
+/* Return the timestamp associated with the HIST_ENTRY * passed as an
+   argument */
+extern time_t history_get_time PARAMS((HIST_ENTRY *));
+
+/* Return the number of bytes that the primary history entries are using.
+   This just adds up the lengths of the_history->lines. */
+extern int history_total_bytes PARAMS((void));
+
+/* Moving around the history list. */
+
+/* Set the position in the history list to POS. */
+extern int history_set_pos PARAMS((int));
+
+/* Back up history_offset to the previous history entry, and return
+   a pointer to that entry.  If there is no previous entry, return
+   a NULL pointer. */
+extern HIST_ENTRY *previous_history PARAMS((void));
+
+/* Move history_offset forward to the next item in the input_history,
+   and return the a pointer to that entry.  If there is no next entry,
+   return a NULL pointer. */
+extern HIST_ENTRY *next_history PARAMS((void));
+
+/* Searching the history list. */
+
+/* Search the history for STRING, starting at history_offset.
+   If DIRECTION < 0, then the search is through previous entries,
+   else through subsequent.  If the string is found, then
+   current_history () is the history entry, and the value of this function
+   is the offset in the line of that history entry that the string was
+   found in.  Otherwise, nothing is changed, and a -1 is returned. */
+extern int history_search PARAMS((const char *, int));
+
+/* Search the history for STRING, starting at history_offset.
+   The search is anchored: matching lines must begin with string.
+   DIRECTION is as in history_search(). */
+extern int history_search_prefix PARAMS((const char *, int));
+
+/* Search for STRING in the history list, starting at POS, an
+   absolute index into the list.  DIR, if negative, says to search
+   backwards from POS, else forwards.
+   Returns the absolute index of the history element where STRING
+   was found, or -1 otherwise. */
+extern int history_search_pos PARAMS((const char *, int, int));
+
+/* Managing the history file. */
+
+/* Add the contents of FILENAME to the history list, a line at a time.
+   If FILENAME is NULL, then read from ~/.history.  Returns 0 if
+   successful, or errno if not. */
+extern int read_history PARAMS((const char *));
+
+/* Read a range of lines from FILENAME, adding them to the history list.
+   Start reading at the FROM'th line and end at the TO'th.  If FROM
+   is zero, start at the beginning.  If TO is less than FROM, read
+   until the end of the file.  If FILENAME is NULL, then read from
+   ~/.history.  Returns 0 if successful, or errno if not. */
+extern int read_history_range PARAMS((const char *, int, int));
+
+/* Write the current history to FILENAME.  If FILENAME is NULL,
+   then write the history list to ~/.history.  Values returned
+   are as in read_history ().  */
+extern int write_history PARAMS((const char *));
+
+/* Append NELEMENT entries to FILENAME.  The entries appended are from
+   the end of the list minus NELEMENTs up to the end of the list. */
+extern int append_history PARAMS((int, const char *));
+
+/* Truncate the history file, leaving only the last NLINES lines. */
+extern int history_truncate_file PARAMS((const char *, int));
+
+/* History expansion. */
+
+/* Expand the string STRING, placing the result into OUTPUT, a pointer
+   to a string.  Returns:
+
+   0) If no expansions took place (or, if the only change in
+      the text was the de-slashifying of the history expansion
+      character)
+   1) If expansions did take place
+  -1) If there was an error in expansion.
+   2) If the returned line should just be printed.
+
+  If an error occurred in expansion, then OUTPUT contains a descriptive
+  error message. */
+extern int history_expand PARAMS((char *, char **));
+
+/* Extract a string segment consisting of the FIRST through LAST
+   arguments present in STRING.  Arguments are broken up as in
+   the shell. */
+extern char *history_arg_extract PARAMS((int, int, const char *));
+
+/* Return the text of the history event beginning at the current
+   offset into STRING.  Pass STRING with *INDEX equal to the
+   history_expansion_char that begins this specification.
+   DELIMITING_QUOTE is a character that is allowed to end the string
+   specification for what to search for in addition to the normal
+   characters `:', ` ', `\t', `\n', and sometimes `?'. */
+extern char *get_history_event PARAMS((const char *, int *, int));
+
+/* Return an array of tokens, much as the shell might.  The tokens are
+   parsed out of STRING. */
+extern char **history_tokenize PARAMS((const char *));
+
+/* Exported history variables. */
+extern int history_base;
+extern int history_length;
+extern int history_max_entries;
+extern int history_offset;
+
+extern int history_lines_read_from_file;
+extern int history_lines_written_to_file;
+
+extern char history_expansion_char;
+extern char history_subst_char;
+extern char *history_word_delimiters;
+extern char history_comment_char;
+extern char *history_no_expand_chars;
+extern char *history_search_delimiter_chars;
+
+extern int history_quotes_inhibit_expansion;
+extern int history_quoting_state;
+
+extern int history_write_timestamps;
+
+/* These two are undocumented; the second is reserved for future use */
+extern int history_multiline_entries;
+extern int history_file_version;
+
+/* Backwards compatibility */
+extern int max_input_history;
+
+/* If set, this function is called to decide whether or not a particular
+   history expansion should be treated as a special case for the calling
+   application and not expanded. */
+extern rl_linebuf_func_t *history_inhibit_expansion_function;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* !_HISTORY_H_ */
diff --git a/lib/readline/histsearch.c b/lib/readline/histsearch.c
new file mode 100644
index 0000000..7a426c9
--- /dev/null
+++ b/lib/readline/histsearch.c
@@ -0,0 +1,287 @@
+/* histsearch.c -- searching the history list. */
+
+/* Copyright (C) 1989, 1992-2009,2017 Free Software Foundation, Inc.
+
+   This file contains the GNU History Library (History), a set of
+   routines for managing the text of previously typed lines.
+
+   History is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   History is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with History.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <stdio.h>
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#if defined (HAVE_FNMATCH)
+#  include <fnmatch.h>
+#endif
+
+#include "history.h"
+#include "histlib.h"
+#include "xmalloc.h"
+
+/* The list of alternate characters that can delimit a history search
+   string. */
+char *history_search_delimiter_chars = (char *)NULL;
+
+static int history_search_internal PARAMS((const char *, int, int));
+
+/* Search the history for STRING, starting at history_offset.
+   If DIRECTION < 0, then the search is through previous entries, else
+   through subsequent.  If ANCHORED is non-zero, the string must
+   appear at the beginning of a history line, otherwise, the string
+   may appear anywhere in the line.  If the string is found, then
+   current_history () is the history entry, and the value of this
+   function is the offset in the line of that history entry that the
+   string was found in.  Otherwise, nothing is changed, and a -1 is
+   returned. */
+
+static int
+history_search_internal (const char *string, int direction, int flags)
+{
+  register int i, reverse;
+  register char *line;
+  register int line_index;
+  int string_len, anchored, patsearch;
+  HIST_ENTRY **the_history; 	/* local */
+
+  i = history_offset;
+  reverse = (direction < 0);
+  anchored = (flags & ANCHORED_SEARCH);
+#if defined (HAVE_FNMATCH)
+  patsearch = (flags & PATTERN_SEARCH);
+#else
+  patsearch = 0;
+#endif
+
+  /* Take care of trivial cases first. */
+  if (string == 0 || *string == '\0')
+    return (-1);
+
+  if (!history_length || ((i >= history_length) && !reverse))
+    return (-1);
+
+  if (reverse && (i >= history_length))
+    i = history_length - 1;
+
+#define NEXT_LINE() do { if (reverse) i--; else i++; } while (0)
+
+  the_history = history_list ();
+  string_len = strlen (string);
+  while (1)
+    {
+      /* Search each line in the history list for STRING. */
+
+      /* At limit for direction? */
+      if ((reverse && i < 0) || (!reverse && i == history_length))
+	return (-1);
+
+      line = the_history[i]->line;
+      line_index = strlen (line);
+
+      /* If STRING is longer than line, no match. */
+      if (patsearch == 0 && (string_len > line_index))
+	{
+	  NEXT_LINE ();
+	  continue;
+	}
+
+      /* Handle anchored searches first. */
+      if (anchored == ANCHORED_SEARCH)
+	{
+#if defined (HAVE_FNMATCH)
+	  if (patsearch)
+	    {
+	      if (fnmatch (string, line, 0) == 0)
+		{
+		  history_offset = i;
+		  return (0);
+		}
+	    }
+	  else
+#endif
+	  if (STREQN (string, line, string_len))
+	    {
+	      history_offset = i;
+	      return (0);
+	    }
+
+	  NEXT_LINE ();
+	  continue;
+	}
+
+      /* Do substring search. */
+      if (reverse)
+	{
+	  line_index -= (patsearch == 0) ? string_len : 1;
+
+	  while (line_index >= 0)
+	    {
+#if defined (HAVE_FNMATCH)
+	      if (patsearch)
+		{
+		  if (fnmatch (string, line + line_index, 0) == 0)
+		    {
+		      history_offset = i;
+		      return (line_index);
+		    }
+		}
+	      else
+#endif
+	      if (STREQN (string, line + line_index, string_len))
+		{
+		  history_offset = i;
+		  return (line_index);
+		}
+	      line_index--;
+	    }
+	}
+      else
+	{
+	  register int limit;
+
+	  limit = line_index - string_len + 1;
+	  line_index = 0;
+
+	  while (line_index < limit)
+	    {
+#if defined (HAVE_FNMATCH)
+	      if (patsearch)
+		{
+		  if (fnmatch (string, line + line_index, 0) == 0)
+		    {
+		      history_offset = i;
+		      return (line_index);
+		    }
+		}
+	      else
+#endif
+	      if (STREQN (string, line + line_index, string_len))
+		{
+		  history_offset = i;
+		  return (line_index);
+		}
+	      line_index++;
+	    }
+	}
+      NEXT_LINE ();
+    }
+}
+
+int
+_hs_history_patsearch (const char *string, int direction, int flags)
+{
+  char *pat;
+  size_t len, start;
+  int ret, unescaped_backslash;
+
+#if defined (HAVE_FNMATCH)
+  /* Assume that the string passed does not have a leading `^' and any
+     anchored search request is captured in FLAGS */
+  len = strlen (string);
+  ret = len - 1;
+  /* fnmatch is required to reject a pattern that ends with an unescaped
+     backslash */
+  if (unescaped_backslash = (string[ret] == '\\'))
+    {
+      while (ret > 0 && string[--ret] == '\\')
+	unescaped_backslash = 1 - unescaped_backslash;
+    }
+  if (unescaped_backslash)
+    return -1;
+  pat = (char *)xmalloc (len + 3);
+  /* If the search string is not anchored, we'll be calling fnmatch (assuming
+     we have it). Prefix a `*' to the front of the search string so we search
+     anywhere in the line. */
+  if ((flags & ANCHORED_SEARCH) == 0 && string[0] != '*')
+    {
+      pat[0] = '*';
+      start = 1;
+      len++;
+    }
+  else
+    {
+      start = 0;
+    }
+
+  /* Attempt to reduce the number of searches by tacking a `*' onto the end
+     of a pattern that doesn't have one.  Assume a pattern that ends in a
+     backslash contains an even number of trailing backslashes; we check
+     above */
+  strcpy (pat + start, string);
+  if (pat[len - 1] != '*')
+    {
+      pat[len] = '*';		/* XXX */
+      pat[len+1] = '\0';
+    }
+#else
+  pat = string;
+#endif
+
+  ret = history_search_internal (pat, direction, flags|PATTERN_SEARCH);
+
+  if (pat != string)
+    free (pat);
+  return ret;
+}
+	
+/* Do a non-anchored search for STRING through the history in DIRECTION. */
+int
+history_search (const char *string, int direction)
+{
+  return (history_search_internal (string, direction, NON_ANCHORED_SEARCH));
+}
+
+/* Do an anchored search for string through the history in DIRECTION. */
+int
+history_search_prefix (const char *string, int direction)
+{
+  return (history_search_internal (string, direction, ANCHORED_SEARCH));
+}
+
+/* Search for STRING in the history list.  DIR is < 0 for searching
+   backwards.  POS is an absolute index into the history list at
+   which point to begin searching. */
+int
+history_search_pos (const char *string, int dir, int pos)
+{
+  int ret, old;
+
+  old = where_history ();
+  history_set_pos (pos);
+  if (history_search (string, dir) == -1)
+    {
+      history_set_pos (old);
+      return (-1);
+    }
+  ret = where_history ();
+  history_set_pos (old);
+  return ret;
+}
diff --git a/lib/readline/input.c b/lib/readline/input.c
new file mode 100644
index 0000000..61b0fde
--- /dev/null
+++ b/lib/readline/input.c
@@ -0,0 +1,715 @@
+/* input.c -- character input functions for readline. */
+
+/* Copyright (C) 1994-2017 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#if defined (__TANDEM)
+#  define _XOPEN_SOURCE_EXTENDED 1
+#  define _TANDEM_SOURCE 1
+#  include <floss.h>
+#endif
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <sys/types.h>
+#include <fcntl.h>
+#if defined (HAVE_SYS_FILE_H)
+#  include <sys/file.h>
+#endif /* HAVE_SYS_FILE_H */
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif /* HAVE_UNISTD_H */
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#include <signal.h>
+
+#include "posixselect.h"
+
+#if defined (FIONREAD_IN_SYS_IOCTL)
+#  include <sys/ioctl.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+/* System-specific feature definitions and include files. */
+#include "rldefs.h"
+#include "rlmbutil.h"
+
+/* Some standard library routines. */
+#include "readline.h"
+
+#include "rlprivate.h"
+#include "rlshell.h"
+#include "xmalloc.h"
+
+/* What kind of non-blocking I/O do we have? */
+#if !defined (O_NDELAY) && defined (O_NONBLOCK)
+#  define O_NDELAY O_NONBLOCK	/* Posix style */
+#endif
+
+#if defined (HAVE_PSELECT)
+extern sigset_t _rl_orig_sigset;
+#endif
+
+/* Non-null means it is a pointer to a function to run while waiting for
+   character input. */
+rl_hook_func_t *rl_event_hook = (rl_hook_func_t *)NULL;
+
+/* A function to call if a read(2) is interrupted by a signal. */
+rl_hook_func_t *rl_signal_event_hook = (rl_hook_func_t *)NULL;
+
+/* A function to replace _rl_input_available for applications using the
+   callback interface. */
+rl_hook_func_t *rl_input_available_hook = (rl_hook_func_t *)NULL;
+
+rl_getc_func_t *rl_getc_function = rl_getc;
+
+static int _keyboard_input_timeout = 100000;		/* 0.1 seconds; it's in usec */
+
+static int ibuffer_space PARAMS((void));
+static int rl_get_char PARAMS((int *));
+static int rl_gather_tyi PARAMS((void));
+
+/* Windows isatty returns true for every character device, including the null
+   device, so we need to perform additional checks. */
+#if defined (_WIN32) && !defined (__CYGWIN__)
+#include <io.h>
+#include <conio.h>
+#define WIN32_LEAN_AND_MEAN 1
+#include <windows.h>
+
+int
+win32_isatty (int fd)
+{
+  if (_isatty(fd))
+    {
+      HANDLE h;
+      DWORD ignored;
+
+      if ((h = (HANDLE) _get_osfhandle (fd)) == INVALID_HANDLE_VALUE)
+	{
+	  errno = EBADF;
+	  return 0;
+	}
+      if (GetConsoleMode (h, &ignored) != 0)
+	return 1;
+    }
+  errno = ENOTTY;
+  return 0;
+}
+
+#define isatty(x)	win32_isatty(x)
+#endif
+
+/* **************************************************************** */
+/*								    */
+/*			Character Input Buffering       	    */
+/*								    */
+/* **************************************************************** */
+
+static int pop_index, push_index;
+static unsigned char ibuffer[512];
+static int ibuffer_len = sizeof (ibuffer) - 1;
+
+#define any_typein (push_index != pop_index)
+
+int
+_rl_any_typein (void)
+{
+  return any_typein;
+}
+
+int
+_rl_pushed_input_available (void)
+{
+  return (push_index != pop_index);
+}
+
+/* Return the amount of space available in the buffer for stuffing
+   characters. */
+static int
+ibuffer_space (void)
+{
+  if (pop_index > push_index)
+    return (pop_index - push_index - 1);
+  else
+    return (ibuffer_len - (push_index - pop_index));
+}
+
+/* Get a key from the buffer of characters to be read.
+   Return the key in KEY.
+   Result is non-zero if there was a key, or 0 if there wasn't. */
+static int
+rl_get_char (int *key)
+{
+  if (push_index == pop_index)
+    return (0);
+
+  *key = ibuffer[pop_index++];
+#if 0
+  if (pop_index >= ibuffer_len)
+#else
+  if (pop_index > ibuffer_len)
+#endif
+    pop_index = 0;
+
+  return (1);
+}
+
+/* Stuff KEY into the *front* of the input buffer.
+   Returns non-zero if successful, zero if there is
+   no space left in the buffer. */
+int
+_rl_unget_char (int key)
+{
+  if (ibuffer_space ())
+    {
+      pop_index--;
+      if (pop_index < 0)
+	pop_index = ibuffer_len;
+      ibuffer[pop_index] = key;
+      return (1);
+    }
+  return (0);
+}
+
+/* If a character is available to be read, then read it and stuff it into
+   IBUFFER.  Otherwise, just return.  Returns number of characters read
+   (0 if none available) and -1 on error (EIO). */
+static int
+rl_gather_tyi (void)
+{
+  int tty;
+  register int tem, result;
+  int chars_avail, k;
+  char input;
+#if defined(HAVE_SELECT)
+  fd_set readfds, exceptfds;
+  struct timeval timeout;
+#endif
+
+  chars_avail = 0;
+  input = 0;
+  tty = fileno (rl_instream);
+
+#if defined (HAVE_SELECT)
+  FD_ZERO (&readfds);
+  FD_ZERO (&exceptfds);
+  FD_SET (tty, &readfds);
+  FD_SET (tty, &exceptfds);
+  USEC_TO_TIMEVAL (_keyboard_input_timeout, timeout);
+  result = select (tty + 1, &readfds, (fd_set *)NULL, &exceptfds, &timeout);
+  if (result <= 0)
+    return 0;	/* Nothing to read. */
+#endif
+
+  result = -1;
+  errno = 0;
+#if defined (FIONREAD)
+  result = ioctl (tty, FIONREAD, &chars_avail);
+  if (result == -1 && errno == EIO)
+    return -1;
+  if (result == -1)
+    chars_avail = 0;
+#endif
+
+#if defined (O_NDELAY)
+  if (result == -1)
+    {
+      tem = fcntl (tty, F_GETFL, 0);
+
+      fcntl (tty, F_SETFL, (tem | O_NDELAY));
+      chars_avail = read (tty, &input, 1);
+
+      fcntl (tty, F_SETFL, tem);
+      if (chars_avail == -1 && errno == EAGAIN)
+	return 0;
+      if (chars_avail == -1 && errno == EIO)
+	return -1;
+      if (chars_avail == 0)	/* EOF */
+	{
+	  rl_stuff_char (EOF);
+	  return (0);
+	}
+    }
+#endif /* O_NDELAY */
+
+#if defined (__MINGW32__)
+  /* Use getch/_kbhit to check for available console input, in the same way
+     that we read it normally. */
+   chars_avail = isatty (tty) ? _kbhit () : 0;
+   result = 0;
+#endif
+
+  /* If there's nothing available, don't waste time trying to read
+     something. */
+  if (chars_avail <= 0)
+    return 0;
+
+  tem = ibuffer_space ();
+
+  if (chars_avail > tem)
+    chars_avail = tem;
+
+  /* One cannot read all of the available input.  I can only read a single
+     character at a time, or else programs which require input can be
+     thwarted.  If the buffer is larger than one character, I lose.
+     Damn! */
+  if (tem < ibuffer_len)
+    chars_avail = 0;
+
+  if (result != -1)
+    {
+      while (chars_avail--)
+	{
+	  RL_CHECK_SIGNALS ();
+	  k = (*rl_getc_function) (rl_instream);
+	  if (rl_stuff_char (k) == 0)
+	    break;			/* some problem; no more room */
+	  if (k == NEWLINE || k == RETURN)
+	    break;
+	}
+    }
+  else
+    {
+      if (chars_avail)
+	rl_stuff_char (input);
+    }
+
+  return 1;
+}
+
+int
+rl_set_keyboard_input_timeout (int u)
+{
+  int o;
+
+  o = _keyboard_input_timeout;
+  if (u >= 0)
+    _keyboard_input_timeout = u;
+  return (o);
+}
+
+/* Is there input available to be read on the readline input file
+   descriptor?  Only works if the system has select(2) or FIONREAD.
+   Uses the value of _keyboard_input_timeout as the timeout; if another
+   readline function wants to specify a timeout and not leave it up to
+   the user, it should use _rl_input_queued(timeout_value_in_microseconds)
+   instead. */
+int
+_rl_input_available (void)
+{
+#if defined(HAVE_SELECT)
+  fd_set readfds, exceptfds;
+  struct timeval timeout;
+#endif
+#if !defined (HAVE_SELECT) && defined(FIONREAD)
+  int chars_avail;
+#endif
+  int tty;
+
+  if (rl_input_available_hook)
+    return (*rl_input_available_hook) ();
+
+  tty = fileno (rl_instream);
+
+#if defined (HAVE_SELECT)
+  FD_ZERO (&readfds);
+  FD_ZERO (&exceptfds);
+  FD_SET (tty, &readfds);
+  FD_SET (tty, &exceptfds);
+  USEC_TO_TIMEVAL (_keyboard_input_timeout, timeout);
+  return (select (tty + 1, &readfds, (fd_set *)NULL, &exceptfds, &timeout) > 0);
+#else
+
+#if defined (FIONREAD)
+  if (ioctl (tty, FIONREAD, &chars_avail) == 0)
+    return (chars_avail);
+#endif
+
+#endif
+
+#if defined (__MINGW32__)
+  if (isatty (tty))
+    return (_kbhit ());
+#endif
+
+  return 0;
+}
+
+int
+_rl_nchars_available ()
+{
+  int chars_avail, fd, result;
+  
+  chars_avail = 0;
+     
+#if defined (FIONREAD)
+  fd = fileno (rl_instream);
+  errno = 0;    
+  result = ioctl (fd, FIONREAD, &chars_avail);    
+  if (result == -1 && errno == EIO)    
+    return -1;    
+#endif
+
+  return chars_avail;
+}
+
+int
+_rl_input_queued (int t)
+{
+  int old_timeout, r;
+
+  old_timeout = rl_set_keyboard_input_timeout (t);
+  r = _rl_input_available ();
+  rl_set_keyboard_input_timeout (old_timeout);
+  return r;
+}
+
+void
+_rl_insert_typein (int c)
+{    	
+  int key, t, i;
+  char *string;
+
+  i = key = 0;
+  string = (char *)xmalloc (ibuffer_len + 1);
+  string[i++] = (char) c;
+
+  while ((t = rl_get_char (&key)) &&
+	 _rl_keymap[key].type == ISFUNC &&
+	 _rl_keymap[key].function == rl_insert)
+    string[i++] = key;
+
+  if (t)
+    _rl_unget_char (key);
+
+  string[i] = '\0';
+  rl_insert_text (string);
+  xfree (string);
+}
+
+/* Add KEY to the buffer of characters to be read.  Returns 1 if the
+   character was stuffed correctly; 0 otherwise. */
+int
+rl_stuff_char (int key)
+{
+  if (ibuffer_space () == 0)
+    return 0;
+
+  if (key == EOF)
+    {
+      key = NEWLINE;
+      rl_pending_input = EOF;
+      RL_SETSTATE (RL_STATE_INPUTPENDING);
+    }
+  ibuffer[push_index++] = key;
+#if 0
+  if (push_index >= ibuffer_len)
+#else
+  if (push_index > ibuffer_len)
+#endif
+    push_index = 0;
+
+  return 1;
+}
+
+/* Make C be the next command to be executed. */
+int
+rl_execute_next (int c)
+{
+  rl_pending_input = c;
+  RL_SETSTATE (RL_STATE_INPUTPENDING);
+  return 0;
+}
+
+/* Clear any pending input pushed with rl_execute_next() */
+int
+rl_clear_pending_input (void)
+{
+  rl_pending_input = 0;
+  RL_UNSETSTATE (RL_STATE_INPUTPENDING);
+  return 0;
+}
+
+/* **************************************************************** */
+/*								    */
+/*			     Character Input			    */
+/*								    */
+/* **************************************************************** */
+
+/* Read a key, including pending input. */
+int
+rl_read_key (void)
+{
+  int c, r;
+
+  if (rl_pending_input)
+    {
+      c = rl_pending_input;	/* XXX - cast to unsigned char if > 0? */
+      rl_clear_pending_input ();
+    }
+  else
+    {
+      /* If input is coming from a macro, then use that. */
+      if (c = _rl_next_macro_key ())
+	return ((unsigned char)c);
+
+      /* If the user has an event function, then call it periodically. */
+      if (rl_event_hook)
+	{
+	  while (rl_event_hook)
+	    {
+	      if (rl_get_char (&c) != 0)
+		break;
+		
+	      if ((r = rl_gather_tyi ()) < 0)	/* XXX - EIO */
+		{
+		  rl_done = 1;
+		  return (errno == EIO ? (RL_ISSTATE (RL_STATE_READCMD) ? READERR : EOF) : '\n');
+		}
+	      else if (r > 0)			/* read something */
+		continue;
+
+	      RL_CHECK_SIGNALS ();
+	      if (rl_done)		/* XXX - experimental */
+		return ('\n');
+	      (*rl_event_hook) ();
+	    }
+	}
+      else
+	{
+	  if (rl_get_char (&c) == 0)
+	    c = (*rl_getc_function) (rl_instream);
+/* fprintf(stderr, "rl_read_key: calling RL_CHECK_SIGNALS: _rl_caught_signal = %d\r\n", _rl_caught_signal); */
+	  RL_CHECK_SIGNALS ();
+	}
+    }
+
+  return (c);
+}
+
+int
+rl_getc (FILE *stream)
+{
+  int result;
+  unsigned char c;
+#if defined (HAVE_PSELECT)
+  sigset_t empty_set;
+  fd_set readfds;
+#endif
+
+  while (1)
+    {
+      RL_CHECK_SIGNALS ();
+
+      /* We know at this point that _rl_caught_signal == 0 */
+
+#if defined (__MINGW32__)
+      if (isatty (fileno (stream)))
+	return (_getch ());	/* "There is no error return." */
+#endif
+      result = 0;
+#if defined (HAVE_PSELECT)
+      FD_ZERO (&readfds);
+      FD_SET (fileno (stream), &readfds);
+#  if defined (HANDLE_SIGNALS)
+      result = pselect (fileno (stream) + 1, &readfds, NULL, NULL, NULL, &_rl_orig_sigset);
+#  else
+      sigemptyset (&empty_set);
+      sigprocmask (SIG_BLOCK, (sigset_t *)NULL, &empty_set);
+      result = pselect (fileno (stream) + 1, &readfds, NULL, NULL, NULL, &empty_set);
+#  endif /* HANDLE_SIGNALS */
+#endif
+      if (result >= 0)
+	result = read (fileno (stream), &c, sizeof (unsigned char));
+
+      if (result == sizeof (unsigned char))
+	return (c);
+
+      /* If zero characters are returned, then the file that we are
+	 reading from is empty!  Return EOF in that case. */
+      if (result == 0)
+	return (EOF);
+
+#if defined (__BEOS__)
+      if (errno == EINTR)
+	continue;
+#endif
+
+#if defined (EWOULDBLOCK)
+#  define X_EWOULDBLOCK EWOULDBLOCK
+#else
+#  define X_EWOULDBLOCK -99
+#endif
+
+#if defined (EAGAIN)
+#  define X_EAGAIN EAGAIN
+#else
+#  define X_EAGAIN -99
+#endif
+
+      if (errno == X_EWOULDBLOCK || errno == X_EAGAIN)
+	{
+	  if (sh_unset_nodelay_mode (fileno (stream)) < 0)
+	    return (EOF);
+	  continue;
+	}
+
+#undef X_EWOULDBLOCK
+#undef X_EAGAIN
+
+/* fprintf(stderr, "rl_getc: result = %d errno = %d\n", result, errno); */
+
+handle_error:
+      /* If the error that we received was EINTR, then try again,
+	 this is simply an interrupted system call to read ().  We allow
+	 the read to be interrupted if we caught SIGHUP, SIGTERM, or any
+	 of the other signals readline treats specially. If the
+	 application sets an event hook, call it for other signals.
+	 Otherwise (not EINTR), some error occurred, also signifying EOF. */
+      if (errno != EINTR)
+	return (RL_ISSTATE (RL_STATE_READCMD) ? READERR : EOF);
+      /* fatal signals of interest */
+#if defined (SIGHUP)
+      else if (_rl_caught_signal == SIGHUP || _rl_caught_signal == SIGTERM)
+#else
+      else if (_rl_caught_signal == SIGTERM)
+#endif
+	return (RL_ISSTATE (RL_STATE_READCMD) ? READERR : EOF);
+      /* keyboard-generated signals of interest */
+#if defined (SIGQUIT)
+      else if (_rl_caught_signal == SIGINT || _rl_caught_signal == SIGQUIT)
+#else
+      else if (_rl_caught_signal == SIGINT)
+#endif
+        RL_CHECK_SIGNALS ();
+#if defined (SIGTSTP)
+      else if (_rl_caught_signal == SIGTSTP)
+	RL_CHECK_SIGNALS ();
+#endif
+      /* non-keyboard-generated signals of interest */
+#if defined (SIGWINCH)
+      else if (_rl_caught_signal == SIGWINCH)
+	RL_CHECK_SIGNALS ();
+#endif /* SIGWINCH */
+#if defined (SIGALRM)
+      else if (_rl_caught_signal == SIGALRM
+#  if defined (SIGVTALRM)
+		|| _rl_caught_signal == SIGVTALRM
+#  endif
+	      )
+        RL_CHECK_SIGNALS ();
+#endif  /* SIGALRM */
+
+      if (rl_signal_event_hook)
+	(*rl_signal_event_hook) ();
+    }
+}
+
+#if defined (HANDLE_MULTIBYTE)
+/* read multibyte char */
+int
+_rl_read_mbchar (char *mbchar, int size)
+{
+  int mb_len, c;
+  size_t mbchar_bytes_length;
+  wchar_t wc;
+  mbstate_t ps, ps_back;
+
+  memset(&ps, 0, sizeof (mbstate_t));
+  memset(&ps_back, 0, sizeof (mbstate_t));
+
+  mb_len = 0;  
+  while (mb_len < size)
+    {
+      c = (mb_len == 0) ? _rl_bracketed_read_key () : rl_read_key ();
+
+      if (c < 0)
+	break;
+
+      mbchar[mb_len++] = c;
+
+      mbchar_bytes_length = mbrtowc (&wc, mbchar, mb_len, &ps);
+      if (mbchar_bytes_length == (size_t)(-1))
+	break;		/* invalid byte sequence for the current locale */
+      else if (mbchar_bytes_length == (size_t)(-2))
+	{
+	  /* shorted bytes */
+	  ps = ps_back;
+	  continue;
+	} 
+      else if (mbchar_bytes_length == 0)
+	{
+	  mbchar[0] = '\0';	/* null wide character */
+	  mb_len = 1;
+	  break;
+	}
+      else if (mbchar_bytes_length > (size_t)(0))
+	break;
+    }
+
+  return mb_len;
+}
+
+/* Read a multibyte-character string whose first character is FIRST into
+   the buffer MB of length MLEN.  Returns the last character read, which
+   may be FIRST.  Used by the search functions, among others.  Very similar
+   to _rl_read_mbchar. */
+int
+_rl_read_mbstring (int first, char *mb, int mlen)
+{
+  int i, c, n;
+  mbstate_t ps;
+
+  c = first;
+  memset (mb, 0, mlen);
+  for (i = 0; c >= 0 && i < mlen; i++)
+    {
+      mb[i] = (char)c;
+      memset (&ps, 0, sizeof (mbstate_t));
+      n = _rl_get_char_len (mb, &ps);
+      if (n == -2)
+	{
+	  /* Read more for multibyte character */
+	  RL_SETSTATE (RL_STATE_MOREINPUT);
+	  c = rl_read_key ();
+	  RL_UNSETSTATE (RL_STATE_MOREINPUT);
+	}
+      else
+	break;
+    }
+  return c;
+}
+#endif /* HANDLE_MULTIBYTE */
diff --git a/lib/readline/isearch.c b/lib/readline/isearch.c
new file mode 100644
index 0000000..080ba3c
--- /dev/null
+++ b/lib/readline/isearch.c
@@ -0,0 +1,890 @@
+/* isearch.c - incremental searching */
+
+/* **************************************************************** */
+/*								    */
+/*			I-Search and Searching			    */
+/*								    */
+/* **************************************************************** */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <sys/types.h>
+
+#include <stdio.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif
+
+#include "rldefs.h"
+#include "rlmbutil.h"
+
+#include "readline.h"
+#include "history.h"
+
+#include "rlprivate.h"
+#include "xmalloc.h"
+
+/* Variables exported to other files in the readline library. */
+char *_rl_isearch_terminators = (char *)NULL;
+
+_rl_search_cxt *_rl_iscxt = 0;
+
+/* Variables imported from other files in the readline library. */
+extern HIST_ENTRY *_rl_saved_line_for_history;
+
+static int rl_search_history PARAMS((int, int));
+
+static _rl_search_cxt *_rl_isearch_init PARAMS((int));
+static void _rl_isearch_fini PARAMS((_rl_search_cxt *));
+
+/* Last line found by the current incremental search, so we don't `find'
+   identical lines many times in a row.  Now part of isearch context. */
+/* static char *prev_line_found; */
+
+/* Last search string and its length. */
+static char *last_isearch_string;
+static int last_isearch_string_len;
+
+static char * const default_isearch_terminators = "\033\012";
+
+_rl_search_cxt *
+_rl_scxt_alloc (int type, int flags)
+{
+  _rl_search_cxt *cxt;
+
+  cxt = (_rl_search_cxt *)xmalloc (sizeof (_rl_search_cxt));
+
+  cxt->type = type;
+  cxt->sflags = flags;
+
+  cxt->search_string = 0;
+  cxt->search_string_size = cxt->search_string_index = 0;
+
+  cxt->lines = 0;
+  cxt->allocated_line = 0;
+  cxt->hlen = cxt->hindex = 0;
+
+  cxt->save_point = rl_point;
+  cxt->save_mark = rl_mark;
+  cxt->save_line = where_history ();
+  cxt->last_found_line = cxt->save_line;
+  cxt->prev_line_found = 0;
+
+  cxt->save_undo_list = 0;
+
+  cxt->keymap = _rl_keymap;
+  cxt->okeymap = _rl_keymap;
+
+  cxt->history_pos = 0;
+  cxt->direction = 0;
+
+  cxt->prevc = cxt->lastc = 0;
+
+  cxt->sline = 0;
+  cxt->sline_len = cxt->sline_index = 0;
+
+  cxt->search_terminators = 0;
+
+  return cxt;
+}
+
+void
+_rl_scxt_dispose (_rl_search_cxt *cxt, int flags)
+{
+  FREE (cxt->search_string);
+  FREE (cxt->allocated_line);
+  FREE (cxt->lines);
+
+  xfree (cxt);
+}
+
+/* Search backwards through the history looking for a string which is typed
+   interactively.  Start with the current line. */
+int
+rl_reverse_search_history (int sign, int key)
+{
+  return (rl_search_history (-sign, key));
+}
+
+/* Search forwards through the history looking for a string which is typed
+   interactively.  Start with the current line. */
+int
+rl_forward_search_history (int sign, int key)
+{
+  return (rl_search_history (sign, key));
+}
+
+/* Display the current state of the search in the echo-area.
+   SEARCH_STRING contains the string that is being searched for,
+   DIRECTION is zero for forward, or non-zero for reverse,
+   WHERE is the history list number of the current line.  If it is
+   -1, then this line is the starting one. */
+static void
+rl_display_search (char *search_string, int flags, int where)
+{
+  char *message;
+  int msglen, searchlen;
+
+  searchlen = (search_string && *search_string) ? strlen (search_string) : 0;
+
+  message = (char *)xmalloc (searchlen + 64);
+  msglen = 0;
+
+#if defined (NOTDEF)
+  if (where != -1)
+    {
+      sprintf (message, "[%d]", where + history_base);
+      msglen = strlen (message);
+    }
+#endif /* NOTDEF */
+
+  message[msglen++] = '(';
+
+  if (flags & SF_FAILED)
+    {
+      strcpy (message + msglen, "failed ");
+      msglen += 7;
+    }
+
+  if (flags & SF_REVERSE)
+    {
+      strcpy (message + msglen, "reverse-");
+      msglen += 8;
+    }
+
+  strcpy (message + msglen, "i-search)`");
+  msglen += 10;
+
+  if (search_string && *search_string)
+    {
+      strcpy (message + msglen, search_string);
+      msglen += searchlen;
+    }
+  else
+    _rl_optimize_redisplay ();
+
+  strcpy (message + msglen, "': ");
+
+  rl_message ("%s", message);
+  xfree (message);
+  (*rl_redisplay_function) ();
+}
+
+static _rl_search_cxt *
+_rl_isearch_init (int direction)
+{
+  _rl_search_cxt *cxt;
+  register int i;
+  HIST_ENTRY **hlist;
+
+  cxt = _rl_scxt_alloc (RL_SEARCH_ISEARCH, 0);
+  if (direction < 0)
+    cxt->sflags |= SF_REVERSE;
+
+  cxt->search_terminators = _rl_isearch_terminators ? _rl_isearch_terminators
+						: default_isearch_terminators;
+
+  /* Create an array of pointers to the lines that we want to search. */
+  hlist = history_list ();
+  rl_maybe_replace_line ();
+  i = 0;
+  if (hlist)
+    for (i = 0; hlist[i]; i++);
+
+  /* Allocate space for this many lines, +1 for the current input line,
+     and remember those lines. */
+  cxt->lines = (char **)xmalloc ((1 + (cxt->hlen = i)) * sizeof (char *));
+  for (i = 0; i < cxt->hlen; i++)
+    cxt->lines[i] = hlist[i]->line;
+
+  if (_rl_saved_line_for_history)
+    cxt->lines[i] = _rl_saved_line_for_history->line;
+  else
+    {
+      /* Keep track of this so we can free it. */
+      cxt->allocated_line = (char *)xmalloc (1 + strlen (rl_line_buffer));
+      strcpy (cxt->allocated_line, &rl_line_buffer[0]);
+      cxt->lines[i] = cxt->allocated_line;
+    }
+
+  cxt->hlen++;
+
+  /* The line where we start the search. */
+  cxt->history_pos = cxt->save_line;
+
+  rl_save_prompt ();
+
+  /* Initialize search parameters. */
+  cxt->search_string = (char *)xmalloc (cxt->search_string_size = 128);
+  cxt->search_string[cxt->search_string_index = 0] = '\0';
+
+  /* Normalize DIRECTION into 1 or -1. */
+  cxt->direction = (direction >= 0) ? 1 : -1;
+
+  cxt->sline = rl_line_buffer;
+  cxt->sline_len = strlen (cxt->sline);
+  cxt->sline_index = rl_point;
+
+  _rl_iscxt = cxt;		/* save globally */
+
+  /* experimental right now */
+  _rl_init_executing_keyseq ();
+
+  return cxt;
+}
+
+static void
+_rl_isearch_fini (_rl_search_cxt *cxt)
+{
+  /* First put back the original state. */
+  rl_replace_line (cxt->lines[cxt->save_line], 0);
+
+  rl_restore_prompt ();
+
+  /* Save the search string for possible later use. */
+  FREE (last_isearch_string);
+  last_isearch_string = cxt->search_string;
+  last_isearch_string_len = cxt->search_string_index;
+  cxt->search_string = 0;
+
+  if (cxt->last_found_line < cxt->save_line)
+    rl_get_previous_history (cxt->save_line - cxt->last_found_line, 0);
+  else
+    rl_get_next_history (cxt->last_found_line - cxt->save_line, 0);
+
+  /* If the string was not found, put point at the end of the last matching
+     line.  If last_found_line == orig_line, we didn't find any matching
+     history lines at all, so put point back in its original position. */
+  if (cxt->sline_index < 0)
+    {
+      if (cxt->last_found_line == cxt->save_line)
+	cxt->sline_index = cxt->save_point;
+      else
+	cxt->sline_index = strlen (rl_line_buffer);
+      rl_mark = cxt->save_mark;
+      rl_deactivate_mark ();
+    }
+
+  rl_point = cxt->sline_index;
+  /* Don't worry about where to put the mark here; rl_get_previous_history
+     and rl_get_next_history take care of it.
+     If we want to highlight the search string, this is where to set the
+     point and mark to do it. */
+  _rl_fix_point (0);
+  rl_deactivate_mark ();
+
+/*  _rl_optimize_redisplay (); */
+  rl_clear_message ();
+}
+
+/* XXX - we could use _rl_bracketed_read_mbstring () here. */
+int
+_rl_search_getchar (_rl_search_cxt *cxt)
+{
+  int c;
+
+  /* Read a key and decide how to proceed. */
+  RL_SETSTATE(RL_STATE_MOREINPUT);
+  c = cxt->lastc = rl_read_key ();
+  RL_UNSETSTATE(RL_STATE_MOREINPUT);
+
+#if defined (HANDLE_MULTIBYTE)
+  /* This ends up with C (and LASTC) being set to the last byte of the
+     multibyte character.  In most cases c == lastc == mb[0] */
+  if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+    c = cxt->lastc = _rl_read_mbstring (cxt->lastc, cxt->mb, MB_LEN_MAX);
+#endif
+
+  RL_CHECK_SIGNALS ();
+  return c;
+}
+
+#define ENDSRCH_CHAR(c) \
+  ((CTRL_CHAR (c) || META_CHAR (c) || (c) == RUBOUT) && ((c) != CTRL ('G')))
+
+/* Process just-read character C according to isearch context CXT.  Return
+   -1 if the caller should just free the context and return, 0 if we should
+   break out of the loop, and 1 if we should continue to read characters. */
+int
+_rl_isearch_dispatch (_rl_search_cxt *cxt, int c)
+{
+  int n, wstart, wlen, limit, cval, incr;
+  char *paste;
+  size_t pastelen;
+  int j;
+  rl_command_func_t *f;
+
+  f = (rl_command_func_t *)NULL;
+
+  if (c < 0)
+    {
+      cxt->sflags |= SF_FAILED;
+      cxt->history_pos = cxt->last_found_line;
+      return -1;
+    }
+
+  _rl_add_executing_keyseq (c);
+
+  /* XXX - experimental code to allow users to bracketed-paste into the search
+     string even when ESC is one of the isearch-terminators. Not perfect yet. */
+  if (_rl_enable_bracketed_paste && c == ESC && strchr (cxt->search_terminators, c) && (n = _rl_nchars_available ()) > (BRACK_PASTE_SLEN-1))
+    {
+      j = _rl_read_bracketed_paste_prefix (c);
+      if (j == 1)
+	{
+	  cxt->lastc = -7;		/* bracketed paste, see below */
+	  goto opcode_dispatch;	
+        }
+      else if (_rl_pushed_input_available ())	/* eat extra char we pushed back */
+	c = cxt->lastc = rl_read_key ();
+      else
+	c = cxt->lastc;			/* last ditch */
+    }
+
+  /* If we are moving into a new keymap, modify cxt->keymap and go on.
+     This can be a problem if c == ESC and we want to terminate the
+     incremental search, so we check */
+  if (c >= 0 && cxt->keymap[c].type == ISKMAP && strchr (cxt->search_terminators, cxt->lastc) == 0)
+    {
+      /* _rl_keyseq_timeout specified in milliseconds; _rl_input_queued
+	 takes microseconds, so multiply by 1000.  If we don't get any
+	 additional input and this keymap shadows another function, process
+	 that key as if it was all we read. */
+      if (_rl_keyseq_timeout > 0 &&
+	    RL_ISSTATE (RL_STATE_CALLBACK) == 0 &&
+	    RL_ISSTATE (RL_STATE_INPUTPENDING) == 0 &&
+	    _rl_pushed_input_available () == 0 &&
+	    ((Keymap)(cxt->keymap[c].function))[ANYOTHERKEY].function &&
+	    _rl_input_queued (_rl_keyseq_timeout*1000) == 0)
+	goto add_character;
+
+      cxt->okeymap = cxt->keymap;
+      cxt->keymap = FUNCTION_TO_KEYMAP (cxt->keymap, c);
+      cxt->sflags |= SF_CHGKMAP;
+      /* XXX - we should probably save this sequence, so we can do
+	 something useful if this doesn't end up mapping to a command we
+	 interpret here.  Right now we just save the most recent character
+	 that caused the index into a new keymap. */
+      cxt->prevc = c;
+#if defined (HANDLE_MULTIBYTE)
+      if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+	{
+	  if (cxt->mb[1] == 0)
+	    {
+	      cxt->pmb[0] = c;		/* XXX should be == cxt->mb[0] */
+	      cxt->pmb[1] = '\0';
+	    }
+	  else
+	    memcpy (cxt->pmb, cxt->mb, sizeof (cxt->pmb));
+	}
+#endif
+      return 1;
+    }
+
+add_character:
+
+  /* Translate the keys we do something with to opcodes. */
+  if (c >= 0 && cxt->keymap[c].type == ISFUNC)
+    {
+      /* If we have a multibyte character, see if it's bound to something that
+	 affects the search. */
+#if defined (HANDLE_MULTIBYTE)
+      if (MB_CUR_MAX > 1 && rl_byte_oriented == 0 && cxt->mb[1])
+	f = rl_function_of_keyseq (cxt->mb, cxt->keymap, (int *)NULL);
+      else
+#endif
+	{
+	  f = cxt->keymap[c].function;
+	  if (f == rl_do_lowercase_version)
+	    f = cxt->keymap[_rl_to_lower (c)].function;
+	}
+
+      if (f == rl_reverse_search_history)
+	cxt->lastc = (cxt->sflags & SF_REVERSE) ? -1 : -2;
+      else if (f == rl_forward_search_history)
+	cxt->lastc = (cxt->sflags & SF_REVERSE) ? -2 : -1;
+      else if (f == rl_rubout)
+	cxt->lastc = -3;
+      else if (c == CTRL ('G') || f == rl_abort)
+	cxt->lastc = -4;
+      else if (c == CTRL ('W') || f == rl_unix_word_rubout)	/* XXX */
+	cxt->lastc = -5;
+      else if (c == CTRL ('Y') || f == rl_yank)	/* XXX */
+	cxt->lastc = -6;
+      else if (f == rl_bracketed_paste_begin)
+	cxt->lastc = -7;
+    }
+
+  /* If we changed the keymap earlier while translating a key sequence into
+     a command, restore it now that we've succeeded. */
+  if (cxt->sflags & SF_CHGKMAP)
+    {
+      cxt->keymap = cxt->okeymap;
+      cxt->sflags &= ~SF_CHGKMAP;
+      /* If we indexed into a new keymap, but didn't map to a command that
+	 affects the search (lastc > 0), and the character that mapped to a
+	 new keymap would have ended the search (ENDSRCH_CHAR(cxt->prevc)),
+	 handle that now as if the previous char would have ended the search
+	 and we would have read the current character. */
+      /* XXX - should we check cxt->mb? */
+      if (cxt->lastc > 0 && ENDSRCH_CHAR (cxt->prevc))
+	{
+	  rl_stuff_char (cxt->lastc);
+	  rl_execute_next (cxt->prevc);
+	  /* XXX - do we insert everything in cxt->pmb? */
+	  return (0);
+	}
+      /* Otherwise, if the current character is mapped to self-insert or
+	 nothing (i.e., not an editing command), and the previous character
+	 was a keymap index, then we need to insert both the previous
+	 character and the current character into the search string. */
+      else if (cxt->lastc > 0 && cxt->prevc > 0 &&
+	       cxt->keymap[cxt->prevc].type == ISKMAP &&
+	       (f == 0 || f == rl_insert))
+	{
+	  /* Make lastc be the next character read */
+	  /* XXX - do we insert everything in cxt->mb? */
+	  rl_execute_next (cxt->lastc);
+	  /* Dispatch on the previous character (insert into search string) */
+	  cxt->lastc = cxt->prevc;
+#if defined (HANDLE_MULTIBYTE)
+	  /* Have to overwrite cxt->mb here because dispatch uses it below */
+	  if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+	    {  
+	      if (cxt->pmb[1] == 0)	  
+		{
+		  cxt->mb[0] = cxt->lastc;	/* == cxt->prevc */
+		  cxt->mb[1] = '\0';
+		}
+	      else
+		memcpy (cxt->mb, cxt->pmb, sizeof (cxt->mb));
+	    }
+#endif
+	  cxt->prevc = 0;	  
+	}
+      else if (cxt->lastc > 0 && cxt->prevc > 0 && f && f != rl_insert)
+	{
+	  _rl_term_executing_keyseq ();		/* should this go in the caller? */
+
+	  _rl_pending_command.map = cxt->keymap;
+	  _rl_pending_command.count = 1;	/* XXX */
+	  _rl_pending_command.key = cxt->lastc;
+	  _rl_pending_command.func = f;
+	  _rl_command_to_execute = &_rl_pending_command;
+
+	  return (0);
+	}
+    }
+
+  /* The characters in isearch_terminators (set from the user-settable
+     variable isearch-terminators) are used to terminate the search but
+     not subsequently execute the character as a command.  The default
+     value is "\033\012" (ESC and C-J). */
+  if (cxt->lastc > 0 && strchr (cxt->search_terminators, cxt->lastc))
+    {
+      /* ESC still terminates the search, but if there is pending
+	 input or if input arrives within 0.1 seconds (on systems
+	 with select(2)) it is used as a prefix character
+	 with rl_execute_next.  WATCH OUT FOR THIS!  This is intended
+	 to allow the arrow keys to be used like ^F and ^B are used
+	 to terminate the search and execute the movement command.
+	 XXX - since _rl_input_available depends on the application-
+	 settable keyboard timeout value, this could alternatively
+	 use _rl_input_queued(100000) */
+      if (cxt->lastc == ESC && (_rl_pushed_input_available () || _rl_input_available ()))
+	rl_execute_next (ESC);
+      return (0);
+    }
+
+#if defined (HANDLE_MULTIBYTE)
+  if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+    {
+      if (cxt->lastc >= 0 && (cxt->mb[0] && cxt->mb[1] == '\0') && ENDSRCH_CHAR (cxt->lastc))
+	{
+	  /* This sets rl_pending_input to LASTC; it will be picked up the next
+	     time rl_read_key is called. */
+	  rl_execute_next (cxt->lastc);
+	  return (0);
+	}
+    }
+  else
+#endif
+    if (cxt->lastc >= 0 && ENDSRCH_CHAR (cxt->lastc))
+      {
+	/* This sets rl_pending_input to LASTC; it will be picked up the next
+	   time rl_read_key is called. */
+	rl_execute_next (cxt->lastc);
+	return (0);
+      }
+
+  _rl_init_executing_keyseq ();
+
+opcode_dispatch:
+  /* Now dispatch on the character.  `Opcodes' affect the search string or
+     state.  Other characters are added to the string.  */
+  switch (cxt->lastc)
+    {
+    /* search again */
+    case -1:
+      if (cxt->search_string_index == 0)
+	{
+	  if (last_isearch_string)
+	    {
+	      cxt->search_string_size = 64 + last_isearch_string_len;
+	      cxt->search_string = (char *)xrealloc (cxt->search_string, cxt->search_string_size);
+	      strcpy (cxt->search_string, last_isearch_string);
+	      cxt->search_string_index = last_isearch_string_len;
+	      rl_display_search (cxt->search_string, cxt->sflags, -1);
+	      break;
+	    }
+	  /* XXX - restore keymap here? */
+	  return (1);
+	}
+      else if ((cxt->sflags & SF_REVERSE) && cxt->sline_index >= 0)
+	cxt->sline_index--;
+      else if (cxt->sline_index != cxt->sline_len)
+	cxt->sline_index++;
+      else
+	rl_ding ();
+      break;
+
+    /* switch directions */
+    case -2:
+      cxt->direction = -cxt->direction;
+      if (cxt->direction < 0)
+	cxt->sflags |= SF_REVERSE;
+      else
+	cxt->sflags &= ~SF_REVERSE;
+      break;
+
+    /* delete character from search string. */
+    case -3:	/* C-H, DEL */
+      /* This is tricky.  To do this right, we need to keep a
+	 stack of search positions for the current search, with
+	 sentinels marking the beginning and end.  But this will
+	 do until we have a real isearch-undo. */
+      if (cxt->search_string_index == 0)
+	rl_ding ();
+      else if (MB_CUR_MAX == 1 || rl_byte_oriented)
+	cxt->search_string[--cxt->search_string_index] = '\0';
+      else
+	{
+	  wstart = _rl_find_prev_mbchar (cxt->search_string, cxt->search_string_index, MB_FIND_NONZERO);
+	  if (wstart >= 0)
+	    cxt->search_string[cxt->search_string_index = wstart] = '\0';
+	  else
+	    cxt->search_string[cxt->search_string_index = 0] = '\0';
+	}
+
+      if (cxt->search_string_index == 0)
+	rl_ding ();
+
+      break;
+
+    case -4:	/* C-G, abort */
+      rl_replace_line (cxt->lines[cxt->save_line], 0);
+      rl_point = cxt->save_point;
+      rl_mark = cxt->save_mark;
+      rl_deactivate_mark ();
+      rl_restore_prompt();
+      rl_clear_message ();
+
+      _rl_fix_point (1);	/* in case save_line and save_point are out of sync */
+      return -1;
+
+    case -5:	/* C-W */
+      /* skip over portion of line we already matched and yank word */
+      wstart = rl_point + cxt->search_string_index;
+      if (wstart >= rl_end)
+	{
+	  rl_ding ();
+	  break;
+	}
+
+      /* if not in a word, move to one. */
+      cval = _rl_char_value (rl_line_buffer, wstart);
+      if (_rl_walphabetic (cval) == 0)
+	{
+	  rl_ding ();
+	  break;
+	}
+      n = MB_NEXTCHAR (rl_line_buffer, wstart, 1, MB_FIND_NONZERO);;
+      while (n < rl_end)
+	{
+	  cval = _rl_char_value (rl_line_buffer, n);
+	  if (_rl_walphabetic (cval) == 0)
+	    break;
+	  n = MB_NEXTCHAR (rl_line_buffer, n, 1, MB_FIND_NONZERO);;
+	}
+      wlen = n - wstart + 1;
+      if (cxt->search_string_index + wlen + 1 >= cxt->search_string_size)
+	{
+	  cxt->search_string_size += wlen + 1;
+	  cxt->search_string = (char *)xrealloc (cxt->search_string, cxt->search_string_size);
+	}
+      for (; wstart < n; wstart++)
+	cxt->search_string[cxt->search_string_index++] = rl_line_buffer[wstart];
+      cxt->search_string[cxt->search_string_index] = '\0';
+      break;
+
+    case -6:	/* C-Y */
+      /* skip over portion of line we already matched and yank rest */
+      wstart = rl_point + cxt->search_string_index;
+      if (wstart >= rl_end)
+	{
+	  rl_ding ();
+	  break;
+	}
+      n = rl_end - wstart + 1;
+      if (cxt->search_string_index + n + 1 >= cxt->search_string_size)
+	{
+	  cxt->search_string_size += n + 1;
+	  cxt->search_string = (char *)xrealloc (cxt->search_string, cxt->search_string_size);
+	}
+      for (n = wstart; n < rl_end; n++)
+	cxt->search_string[cxt->search_string_index++] = rl_line_buffer[n];
+      cxt->search_string[cxt->search_string_index] = '\0';
+      break;
+
+    case -7:	/* bracketed paste */
+      paste = _rl_bracketed_text (&pastelen);
+      if (paste == 0 || *paste == 0)
+	{
+	  free (paste);
+	  break;
+	}
+      if (_rl_enable_active_region)
+	rl_activate_mark ();
+      if (cxt->search_string_index + pastelen + 1 >= cxt->search_string_size)
+	{
+	  cxt->search_string_size += pastelen + 2;
+	  cxt->search_string = (char *)xrealloc (cxt->search_string, cxt->search_string_size);
+	}
+      strcpy (cxt->search_string + cxt->search_string_index, paste);
+      cxt->search_string_index += pastelen;
+      free (paste);
+      break;
+
+    /* Add character to search string and continue search. */
+    default:
+#if defined (HANDLE_MULTIBYTE)
+      wlen = (cxt->mb[0] == 0 || cxt->mb[1] == 0) ? 1 : RL_STRLEN (cxt->mb);
+#else
+      wlen = 1;
+#endif
+      if (cxt->search_string_index + wlen + 1 >= cxt->search_string_size)
+	{
+	  cxt->search_string_size += 128;	/* 128 much greater than MB_CUR_MAX */
+	  cxt->search_string = (char *)xrealloc (cxt->search_string, cxt->search_string_size);
+	}
+#if defined (HANDLE_MULTIBYTE)
+      if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+	{
+	  int j;
+
+	  if (cxt->mb[0] == 0 || cxt->mb[1] == 0)
+	    cxt->search_string[cxt->search_string_index++] = cxt->mb[0];
+	  else
+	    for (j = 0; j < wlen; )
+	      cxt->search_string[cxt->search_string_index++] = cxt->mb[j++];
+	}
+      else
+#endif
+	cxt->search_string[cxt->search_string_index++] = cxt->lastc;	/* XXX - was c instead of lastc */
+      cxt->search_string[cxt->search_string_index] = '\0';
+      break;
+    }
+
+  for (cxt->sflags &= ~(SF_FOUND|SF_FAILED);; )
+    {
+      if (cxt->search_string_index == 0)
+	{
+	  cxt->sflags |= SF_FAILED;
+	  break;
+	}
+
+      limit = cxt->sline_len - cxt->search_string_index + 1;
+
+      /* Search the current line. */
+      while ((cxt->sflags & SF_REVERSE) ? (cxt->sline_index >= 0) : (cxt->sline_index < limit))
+	{
+	  if (STREQN (cxt->search_string, cxt->sline + cxt->sline_index, cxt->search_string_index))
+	    {
+	      cxt->sflags |= SF_FOUND;
+	      break;
+	    }
+	  else
+	    cxt->sline_index += cxt->direction;
+
+	  if (cxt->sline_index < 0)
+	    {
+	      cxt->sline_index = 0;
+	      break;
+	    }
+	}
+      if (cxt->sflags & SF_FOUND)
+	break;
+
+      /* Move to the next line, but skip new copies of the line
+	 we just found and lines shorter than the string we're
+	 searching for. */
+      do
+	{
+	  /* Move to the next line. */
+	  cxt->history_pos += cxt->direction;
+
+	  /* At limit for direction? */
+	  if ((cxt->sflags & SF_REVERSE) ? (cxt->history_pos < 0) : (cxt->history_pos == cxt->hlen))
+	    {
+	      cxt->sflags |= SF_FAILED;
+	      break;
+	    }
+
+	  /* We will need these later. */
+	  cxt->sline = cxt->lines[cxt->history_pos];
+	  cxt->sline_len = strlen (cxt->sline);
+	}
+      while ((cxt->prev_line_found && STREQ (cxt->prev_line_found, cxt->lines[cxt->history_pos])) ||
+	     (cxt->search_string_index > cxt->sline_len));
+
+      if (cxt->sflags & SF_FAILED)
+	{
+	  /* XXX - reset sline_index if < 0 */
+	  if (cxt->sline_index < 0)
+	    cxt->sline_index = 0;
+	  break;
+	}
+
+      /* Now set up the line for searching... */
+      cxt->sline_index = (cxt->sflags & SF_REVERSE) ? cxt->sline_len - cxt->search_string_index : 0;
+    }
+
+  /* reset the keymaps for the next time through the loop */
+  cxt->keymap = cxt->okeymap = _rl_keymap;
+
+  if (cxt->sflags & SF_FAILED)
+    {
+      /* We cannot find the search string.  Ding the bell. */
+      rl_ding ();
+      cxt->history_pos = cxt->last_found_line;
+      rl_deactivate_mark ();
+      rl_display_search (cxt->search_string, cxt->sflags, (cxt->history_pos == cxt->save_line) ? -1 : cxt->history_pos);
+      return 1;
+    }
+
+  /* We have found the search string.  Just display it.  But don't
+     actually move there in the history list until the user accepts
+     the location. */
+  if (cxt->sflags & SF_FOUND)
+    {
+      cxt->prev_line_found = cxt->lines[cxt->history_pos];
+      rl_replace_line (cxt->lines[cxt->history_pos], 0);
+      if (_rl_enable_active_region)
+	rl_activate_mark ();	
+      rl_point = cxt->sline_index;
+      if (rl_mark_active_p () && cxt->search_string_index > 0)
+	rl_mark = rl_point + cxt->search_string_index;
+      cxt->last_found_line = cxt->history_pos;
+      rl_display_search (cxt->search_string, cxt->sflags, (cxt->history_pos == cxt->save_line) ? -1 : cxt->history_pos);
+    }
+
+  return 1;
+}
+
+int
+_rl_isearch_cleanup (_rl_search_cxt *cxt, int r)
+{
+  if (r >= 0)
+    _rl_isearch_fini (cxt);
+  _rl_scxt_dispose (cxt, 0);
+  _rl_iscxt = 0;
+
+  RL_UNSETSTATE(RL_STATE_ISEARCH);
+
+  return (r != 0);
+}
+
+/* Search through the history looking for an interactively typed string.
+   This is analogous to i-search.  We start the search in the current line.
+   DIRECTION is which direction to search; >= 0 means forward, < 0 means
+   backwards. */
+static int
+rl_search_history (int direction, int invoking_key)
+{
+  _rl_search_cxt *cxt;		/* local for now, but saved globally */
+  int c, r;
+
+  RL_SETSTATE(RL_STATE_ISEARCH);
+  cxt = _rl_isearch_init (direction);
+
+  rl_display_search (cxt->search_string, cxt->sflags, -1);
+
+  /* If we are using the callback interface, all we do is set up here and
+      return.  The key is that we leave RL_STATE_ISEARCH set. */
+  if (RL_ISSTATE (RL_STATE_CALLBACK))
+    return (0);
+
+  r = -1;
+  for (;;)
+    {
+      c = _rl_search_getchar (cxt);
+      /* We might want to handle EOF here (c == 0) */
+      r = _rl_isearch_dispatch (cxt, cxt->lastc);
+      if (r <= 0)
+        break;
+    }
+
+  /* The searching is over.  The user may have found the string that she
+     was looking for, or else she may have exited a failing search.  If
+     LINE_INDEX is -1, then that shows that the string searched for was
+     not found.  We use this to determine where to place rl_point. */
+  return (_rl_isearch_cleanup (cxt, r));
+}
+
+#if defined (READLINE_CALLBACKS)
+/* Called from the callback functions when we are ready to read a key.  The
+   callback functions know to call this because RL_ISSTATE(RL_STATE_ISEARCH).
+   If _rl_isearch_dispatch finishes searching, this function is responsible
+   for turning off RL_STATE_ISEARCH, which it does using _rl_isearch_cleanup. */
+int
+_rl_isearch_callback (_rl_search_cxt *cxt)
+{
+  int c, r;
+
+  c = _rl_search_getchar (cxt);
+  /* We might want to handle EOF here */
+  r = _rl_isearch_dispatch (cxt, cxt->lastc);
+
+  return (r <= 0) ? _rl_isearch_cleanup (cxt, r) : 0;
+}
+#endif
diff --git a/lib/readline/keymaps.c b/lib/readline/keymaps.c
new file mode 100644
index 0000000..4ade30b
--- /dev/null
+++ b/lib/readline/keymaps.c
@@ -0,0 +1,174 @@
+/* keymaps.c -- Functions and keymaps for the GNU Readline library. */
+
+/* Copyright (C) 1988,1989-2009,2017 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#include <stdio.h>	/* for FILE * definition for readline.h */
+
+#include "readline.h"
+#include "rlconf.h"
+
+#include "emacs_keymap.c"
+
+#if defined (VI_MODE)
+#include "vi_keymap.c"
+#endif
+
+#include "xmalloc.h"
+
+/* **************************************************************** */
+/*								    */
+/*		      Functions for manipulating Keymaps.	    */
+/*								    */
+/* **************************************************************** */
+
+
+/* Return a new, empty keymap.
+   Free it with free() when you are done. */
+Keymap
+rl_make_bare_keymap (void)
+{
+  register int i;
+  Keymap keymap;
+
+  keymap = (Keymap)xmalloc (KEYMAP_SIZE * sizeof (KEYMAP_ENTRY));
+  for (i = 0; i < KEYMAP_SIZE; i++)
+    {
+      keymap[i].type = ISFUNC;
+      keymap[i].function = (rl_command_func_t *)NULL;
+    }
+
+#if 0
+  for (i = 'A'; i < ('Z' + 1); i++)
+    {
+      keymap[i].type = ISFUNC;
+      keymap[i].function = rl_do_lowercase_version;
+    }
+#endif
+
+  return (keymap);
+}
+
+/* A convenience function that returns 1 if there are no keys bound to
+   functions in KEYMAP */
+int
+rl_empty_keymap (Keymap keymap)
+{
+  int i;
+
+  for (i = 0; i < ANYOTHERKEY; i++)
+    {
+      if (keymap[i].type != ISFUNC || keymap[i].function)
+	return 0;
+    }
+  return 1;
+}
+
+/* Return a new keymap which is a copy of MAP.  Just copies pointers, does
+   not copy text of macros or descend into child keymaps. */
+Keymap
+rl_copy_keymap (Keymap map)
+{
+  register int i;
+  Keymap temp;
+
+  temp = rl_make_bare_keymap ();
+  for (i = 0; i < KEYMAP_SIZE; i++)
+    {
+      temp[i].type = map[i].type;
+      temp[i].function = map[i].function;
+    }
+  return (temp);
+}
+
+/* Return a new keymap with the printing characters bound to rl_insert,
+   the uppercase Meta characters bound to run their lowercase equivalents,
+   and the Meta digits bound to produce numeric arguments. */
+Keymap
+rl_make_keymap (void)
+{
+  register int i;
+  Keymap newmap;
+
+  newmap = rl_make_bare_keymap ();
+
+  /* All ASCII printing characters are self-inserting. */
+  for (i = ' '; i < 127; i++)
+    newmap[i].function = rl_insert;
+
+  newmap[TAB].function = rl_insert;
+  newmap[RUBOUT].function = rl_rubout;	/* RUBOUT == 127 */
+  newmap[CTRL('H')].function = rl_rubout;
+
+#if KEYMAP_SIZE > 128
+  /* Printing characters in ISO Latin-1 and some 8-bit character sets. */
+  for (i = 128; i < 256; i++)
+    newmap[i].function = rl_insert;
+#endif /* KEYMAP_SIZE > 128 */
+
+  return (newmap);
+}
+
+/* Free the storage associated with MAP. */
+void
+rl_discard_keymap (Keymap map)
+{
+  int i;
+
+  if (map == 0)
+    return;
+
+  for (i = 0; i < KEYMAP_SIZE; i++)
+    {
+      switch (map[i].type)
+	{
+	case ISFUNC:
+	  break;
+
+	case ISKMAP:
+	  rl_discard_keymap ((Keymap)map[i].function);
+	  xfree ((char *)map[i].function);
+	  break;
+
+	case ISMACR:
+	  xfree ((char *)map[i].function);
+	  break;
+	}
+    }
+}
+
+/* Convenience function that discards, then frees, MAP. */
+void
+rl_free_keymap (Keymap map)
+{
+  rl_discard_keymap (map);
+  xfree ((char *)map);
+}
diff --git a/lib/readline/keymaps.h b/lib/readline/keymaps.h
new file mode 100644
index 0000000..1fa853d
--- /dev/null
+++ b/lib/readline/keymaps.h
@@ -0,0 +1,100 @@
+/* keymaps.h -- Manipulation of readline keymaps. */
+
+/* Copyright (C) 1987, 1989, 1992 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _KEYMAPS_H_
+#define _KEYMAPS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined (READLINE_LIBRARY)
+#  include "rlstdc.h"
+#  include "chardefs.h"
+#  include "rltypedefs.h"
+#else
+#  include <readline/rlstdc.h>
+#  include <readline/chardefs.h>
+#  include <readline/rltypedefs.h>
+#endif
+
+/* A keymap contains one entry for each key in the ASCII set.
+   Each entry consists of a type and a pointer.
+   FUNCTION is the address of a function to run, or the
+   address of a keymap to indirect through.
+   TYPE says which kind of thing FUNCTION is. */
+typedef struct _keymap_entry {
+  char type;
+  rl_command_func_t *function;
+} KEYMAP_ENTRY;
+
+/* This must be large enough to hold bindings for all of the characters
+   in a desired character set (e.g, 128 for ASCII, 256 for ISO Latin-x,
+   and so on) plus one for subsequence matching. */
+#define KEYMAP_SIZE 257
+#define ANYOTHERKEY KEYMAP_SIZE-1
+
+typedef KEYMAP_ENTRY KEYMAP_ENTRY_ARRAY[KEYMAP_SIZE];
+typedef KEYMAP_ENTRY *Keymap;
+
+/* The values that TYPE can have in a keymap entry. */
+#define ISFUNC 0
+#define ISKMAP 1
+#define ISMACR 2
+
+extern KEYMAP_ENTRY_ARRAY emacs_standard_keymap, emacs_meta_keymap, emacs_ctlx_keymap;
+extern KEYMAP_ENTRY_ARRAY vi_insertion_keymap, vi_movement_keymap;
+
+/* Return a new, empty keymap.
+   Free it with free() when you are done. */
+extern Keymap rl_make_bare_keymap PARAMS((void));
+
+/* Return a new keymap which is a copy of MAP. */
+extern Keymap rl_copy_keymap PARAMS((Keymap));
+
+/* Return a new keymap with the printing characters bound to rl_insert,
+   the lowercase Meta characters bound to run their equivalents, and
+   the Meta digits bound to produce numeric arguments. */
+extern Keymap rl_make_keymap PARAMS((void));
+
+/* Free the storage associated with a keymap. */
+extern void rl_discard_keymap PARAMS((Keymap));
+
+/* These functions actually appear in bind.c */
+
+/* Return the keymap corresponding to a given name.  Names look like
+   `emacs' or `emacs-meta' or `vi-insert'.  */
+extern Keymap rl_get_keymap_by_name PARAMS((const char *));
+
+/* Return the current keymap. */
+extern Keymap rl_get_keymap PARAMS((void));
+
+/* Set the current keymap to MAP. */
+extern void rl_set_keymap PARAMS((Keymap));
+
+/* Set the name of MAP to NAME */
+extern int rl_set_keymap_name PARAMS((const char *, Keymap));
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _KEYMAPS_H_ */
diff --git a/lib/readline/kill.c b/lib/readline/kill.c
new file mode 100644
index 0000000..50c3fde
--- /dev/null
+++ b/lib/readline/kill.c
@@ -0,0 +1,866 @@
+/* kill.c -- kill ring management. */
+
+/* Copyright (C) 1994-2020 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <sys/types.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>           /* for _POSIX_VERSION */
+#endif /* HAVE_UNISTD_H */
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#include <stdio.h>
+
+/* System-specific feature definitions and include files. */
+#include "rldefs.h"
+
+/* Some standard library routines. */
+#include "readline.h"
+#include "history.h"
+
+#include "rlprivate.h"
+#include "xmalloc.h"
+
+/* **************************************************************** */
+/*								    */
+/*			Killing Mechanism			    */
+/*								    */
+/* **************************************************************** */
+
+/* What we assume for a max number of kills. */
+#define DEFAULT_MAX_KILLS 10
+
+/* The real variable to look at to find out when to flush kills. */
+static int rl_max_kills =  DEFAULT_MAX_KILLS;
+
+/* Where to store killed text. */
+static char **rl_kill_ring = (char **)NULL;
+
+/* Where we are in the kill ring. */
+static int rl_kill_index;
+
+/* How many slots we have in the kill ring. */
+static int rl_kill_ring_length;
+
+static int _rl_copy_to_kill_ring PARAMS((char *, int));
+static int region_kill_internal PARAMS((int));
+static int _rl_copy_word_as_kill PARAMS((int, int));
+static int rl_yank_nth_arg_internal PARAMS((int, int, int));
+
+/* How to say that you only want to save a certain amount
+   of kill material. */
+int
+rl_set_retained_kills (int num)
+{
+  return 0;
+}
+
+/* Add TEXT to the kill ring, allocating a new kill ring slot as necessary.
+   This uses TEXT directly, so the caller must not free it.  If APPEND is
+   non-zero, and the last command was a kill, the text is appended to the
+   current kill ring slot, otherwise prepended. */
+static int
+_rl_copy_to_kill_ring (char *text, int append)
+{
+  char *old, *new;
+  int slot;
+
+  /* First, find the slot to work with. */
+  if (_rl_last_command_was_kill == 0 || rl_kill_ring == 0)
+    {
+      /* Get a new slot.  */
+      if (rl_kill_ring == 0)
+	{
+	  /* If we don't have any defined, then make one. */
+	  rl_kill_ring = (char **)
+	    xmalloc (((rl_kill_ring_length = 1) + 1) * sizeof (char *));
+	  rl_kill_ring[slot = 0] = (char *)NULL;
+	}
+      else
+	{
+	  /* We have to add a new slot on the end, unless we have
+	     exceeded the max limit for remembering kills. */
+	  slot = rl_kill_ring_length;
+	  if (slot == rl_max_kills)
+	    {
+	      register int i;
+	      xfree (rl_kill_ring[0]);
+	      for (i = 0; i < slot; i++)
+		rl_kill_ring[i] = rl_kill_ring[i + 1];
+	    }
+	  else
+	    {
+	      slot = rl_kill_ring_length += 1;
+	      rl_kill_ring = (char **)xrealloc (rl_kill_ring, (slot + 1) * sizeof (char *));
+	    }
+	  rl_kill_ring[--slot] = (char *)NULL;
+	}
+    }
+  else
+    slot = rl_kill_ring_length - 1;
+
+  /* If the last command was a kill, prepend or append. */
+  if (_rl_last_command_was_kill && rl_kill_ring[slot] && rl_editing_mode != vi_mode)
+    {
+      old = rl_kill_ring[slot];
+      new = (char *)xmalloc (1 + strlen (old) + strlen (text));
+
+      if (append)
+	{
+	  strcpy (new, old);
+	  strcat (new, text);
+	}
+      else
+	{
+	  strcpy (new, text);
+	  strcat (new, old);
+	}
+      xfree (old);
+      xfree (text);
+      rl_kill_ring[slot] = new;
+    }
+  else
+    rl_kill_ring[slot] = text;
+
+  rl_kill_index = slot;
+  return 0;
+}
+
+/* The way to kill something.  This appends or prepends to the last
+   kill, if the last command was a kill command.  if FROM is less
+   than TO, then the text is appended, otherwise prepended.  If the
+   last command was not a kill command, then a new slot is made for
+   this kill. */
+int
+rl_kill_text (int from, int to)
+{
+  char *text;
+
+  /* Is there anything to kill? */
+  if (from == to)
+    {
+      _rl_last_command_was_kill++;
+      return 0;
+    }
+
+  text = rl_copy_text (from, to);
+
+  /* Delete the copied text from the line. */
+  rl_delete_text (from, to);
+
+  _rl_copy_to_kill_ring (text, from < to);
+
+  _rl_last_command_was_kill++;
+  return 0;
+}
+
+/* Now REMEMBER!  In order to do prepending or appending correctly, kill
+   commands always make rl_point's original position be the FROM argument,
+   and rl_point's extent be the TO argument. */
+
+/* **************************************************************** */
+/*								    */
+/*			Killing Commands			    */
+/*								    */
+/* **************************************************************** */
+
+/* Delete the word at point, saving the text in the kill ring. */
+int
+rl_kill_word (int count, int key)
+{
+  int orig_point;
+
+  if (count < 0)
+    return (rl_backward_kill_word (-count, key));
+  else
+    {
+      orig_point = rl_point;
+      rl_forward_word (count, key);
+
+      if (rl_point != orig_point)
+	rl_kill_text (orig_point, rl_point);
+
+      rl_point = orig_point;
+      if (rl_editing_mode == emacs_mode)
+	rl_mark = rl_point;
+    }
+  return 0;
+}
+
+/* Rubout the word before point, placing it on the kill ring. */
+int
+rl_backward_kill_word (int count, int key)
+{
+  int orig_point;
+
+  if (count < 0)
+    return (rl_kill_word (-count, key));
+  else
+    {
+      orig_point = rl_point;
+      rl_backward_word (count, key);
+
+      if (rl_point != orig_point)
+	rl_kill_text (orig_point, rl_point);
+
+      if (rl_editing_mode == emacs_mode)
+	rl_mark = rl_point;
+    }
+  return 0;
+}
+
+/* Kill from here to the end of the line.  If DIRECTION is negative, kill
+   back to the line start instead. */
+int
+rl_kill_line (int direction, int key)
+{
+  int orig_point;
+
+  if (direction < 0)
+    return (rl_backward_kill_line (1, key));
+  else
+    {
+      orig_point = rl_point;
+      rl_end_of_line (1, key);
+      if (orig_point != rl_point)
+	rl_kill_text (orig_point, rl_point);
+      rl_point = orig_point;
+      if (rl_editing_mode == emacs_mode)
+	rl_mark = rl_point;
+    }
+  return 0;
+}
+
+/* Kill backwards to the start of the line.  If DIRECTION is negative, kill
+   forwards to the line end instead. */
+int
+rl_backward_kill_line (int direction, int key)
+{
+  int orig_point;
+
+  if (direction < 0)
+    return (rl_kill_line (1, key));
+  else
+    {
+      if (rl_point == 0)
+	rl_ding ();
+      else
+	{
+	  orig_point = rl_point;
+	  rl_beg_of_line (1, key);
+	  if (rl_point != orig_point)
+	    rl_kill_text (orig_point, rl_point);
+	  if (rl_editing_mode == emacs_mode)
+	    rl_mark = rl_point;
+	}
+    }
+  return 0;
+}
+
+/* Kill the whole line, no matter where point is. */
+int
+rl_kill_full_line (int count, int key)
+{
+  rl_begin_undo_group ();
+  rl_point = 0;
+  rl_kill_text (rl_point, rl_end);
+  rl_mark = 0;
+  rl_end_undo_group ();
+  return 0;
+}
+
+/* The next two functions mimic unix line editing behaviour, except they
+   save the deleted text on the kill ring.  This is safer than not saving
+   it, and since we have a ring, nobody should get screwed. */
+
+/* This does what C-w does in Unix.  We can't prevent people from
+   using behaviour that they expect. */
+int
+rl_unix_word_rubout (int count, int key)
+{
+  int orig_point;
+
+  if (rl_point == 0)
+    rl_ding ();
+  else
+    {
+      orig_point = rl_point;
+      if (count <= 0)
+	count = 1;
+
+      while (count--)
+	{
+	  while (rl_point && whitespace (rl_line_buffer[rl_point - 1]))
+	    rl_point--;
+
+	  while (rl_point && (whitespace (rl_line_buffer[rl_point - 1]) == 0))
+	    rl_point--;		/* XXX - multibyte? */
+	}
+
+      rl_kill_text (orig_point, rl_point);
+      if (rl_editing_mode == emacs_mode)
+	rl_mark = rl_point;
+    }
+
+  return 0;
+}
+
+/* This deletes one filename component in a Unix pathname.  That is, it
+   deletes backward to directory separator (`/') or whitespace.  */
+int
+rl_unix_filename_rubout (int count, int key)
+{
+  int orig_point, c;
+
+  if (rl_point == 0)
+    rl_ding ();
+  else
+    {
+      orig_point = rl_point;
+      if (count <= 0)
+	count = 1;
+
+      while (count--)
+	{
+	  c = rl_line_buffer[rl_point - 1];
+	  while (rl_point && (whitespace (c) || c == '/'))
+	    {
+	      rl_point--;
+	      c = rl_line_buffer[rl_point - 1];
+	    }
+
+	  while (rl_point && (whitespace (c) == 0) && c != '/')
+	    {
+	      rl_point--;	/* XXX - multibyte? */
+	      c = rl_line_buffer[rl_point - 1];
+	    }
+	}
+
+      rl_kill_text (orig_point, rl_point);
+      if (rl_editing_mode == emacs_mode)
+	rl_mark = rl_point;
+    }
+
+  return 0;
+}
+
+/* Here is C-u doing what Unix does.  You don't *have* to use these
+   key-bindings.  We have a choice of killing the entire line, or
+   killing from where we are to the start of the line.  We choose the
+   latter, because if you are a Unix weenie, then you haven't backspaced
+   into the line at all, and if you aren't, then you know what you are
+   doing. */
+int
+rl_unix_line_discard (int count, int key)
+{
+  if (rl_point == 0)
+    rl_ding ();
+  else
+    {
+      rl_kill_text (rl_point, 0);
+      rl_point = 0;
+      if (rl_editing_mode == emacs_mode)
+	rl_mark = rl_point;
+    }
+  return 0;
+}
+
+/* Copy the text in the `region' to the kill ring.  If DELETE is non-zero,
+   delete the text from the line as well. */
+static int
+region_kill_internal (int delete)
+{
+  char *text;
+
+  if (rl_mark != rl_point)
+    {
+      text = rl_copy_text (rl_point, rl_mark);
+      if (delete)
+	rl_delete_text (rl_point, rl_mark);
+      _rl_copy_to_kill_ring (text, rl_point < rl_mark);
+    }
+
+  _rl_fix_point (1);
+  _rl_last_command_was_kill++;
+  return 0;
+}
+
+/* Copy the text in the region to the kill ring. */
+int
+rl_copy_region_to_kill (int count, int key)
+{
+  return (region_kill_internal (0));
+}
+
+/* Kill the text between the point and mark. */
+int
+rl_kill_region (int count, int key)
+{
+  int r, npoint;
+
+  npoint = (rl_point < rl_mark) ? rl_point : rl_mark;
+  r = region_kill_internal (1);
+  rl_point = npoint;
+  _rl_fix_point (1);
+  return r;
+}
+
+/* Copy COUNT words to the kill ring.  DIR says which direction we look
+   to find the words. */
+static int
+_rl_copy_word_as_kill (int count, int dir)
+{
+  int om, op, r;
+
+  om = rl_mark;
+  op = rl_point;
+
+  if (dir > 0)
+    rl_forward_word (count, 0);
+  else
+    rl_backward_word (count, 0);
+
+  rl_mark = rl_point;
+
+  if (dir > 0)
+    rl_backward_word (count, 0);
+  else
+    rl_forward_word (count, 0);
+
+  r = region_kill_internal (0);
+
+  rl_mark = om;
+  rl_point = op;
+
+  return r;
+}
+
+int
+rl_copy_forward_word (int count, int key)
+{
+  if (count < 0)
+    return (rl_copy_backward_word (-count, key));
+
+  return (_rl_copy_word_as_kill (count, 1));
+}
+
+int
+rl_copy_backward_word (int count, int key)
+{
+  if (count < 0)
+    return (rl_copy_forward_word (-count, key));
+
+  return (_rl_copy_word_as_kill (count, -1));
+}
+  
+/* Yank back the last killed text.  This ignores arguments. */
+int
+rl_yank (int count, int key)
+{
+  if (rl_kill_ring == 0)
+    {
+      _rl_abort_internal ();
+      return 1;
+    }
+
+  _rl_set_mark_at_pos (rl_point);
+  rl_insert_text (rl_kill_ring[rl_kill_index]);
+  return 0;
+}
+
+/* If the last command was yank, or yank_pop, and the text just
+   before point is identical to the current kill item, then
+   delete that text from the line, rotate the index down, and
+   yank back some other text. */
+int
+rl_yank_pop (int count, int key)
+{
+  int l, n;
+
+  if (((rl_last_func != rl_yank_pop) && (rl_last_func != rl_yank)) ||
+      !rl_kill_ring)
+    {
+      _rl_abort_internal ();
+      return 1;
+    }
+
+  l = strlen (rl_kill_ring[rl_kill_index]);
+  n = rl_point - l;
+  if (n >= 0 && STREQN (rl_line_buffer + n, rl_kill_ring[rl_kill_index], l))
+    {
+      rl_delete_text (n, rl_point);
+      rl_point = n;
+      rl_kill_index--;
+      if (rl_kill_index < 0)
+	rl_kill_index = rl_kill_ring_length - 1;
+      rl_yank (1, 0);
+      return 0;
+    }
+  else
+    {
+      _rl_abort_internal ();
+      return 1;
+    }
+}
+
+#if defined (VI_MODE)
+int
+rl_vi_yank_pop (int count, int key)
+{
+  int l, n;
+
+  if (((rl_last_func != rl_vi_yank_pop) && (rl_last_func != rl_vi_put)) ||
+      !rl_kill_ring)
+    {
+      _rl_abort_internal ();
+      return 1;
+    }
+
+  l = strlen (rl_kill_ring[rl_kill_index]);
+  n = rl_point - l;
+  if (n >= 0 && STREQN (rl_line_buffer + n, rl_kill_ring[rl_kill_index], l))
+    {
+      rl_delete_text (n, rl_point);
+      rl_point = n;
+      rl_kill_index--;
+      if (rl_kill_index < 0)
+	rl_kill_index = rl_kill_ring_length - 1;
+      rl_vi_put (1, 'p');
+      return 0;
+    }
+  else
+    {
+      _rl_abort_internal ();
+      return 1;
+    }
+}
+#endif /* VI_MODE */
+
+/* Yank the COUNTh argument from the previous history line, skipping
+   HISTORY_SKIP lines before looking for the `previous line'. */
+static int
+rl_yank_nth_arg_internal (int count, int key, int history_skip)
+{
+  register HIST_ENTRY *entry;
+  char *arg;
+  int i, pos;
+
+  pos = where_history ();
+
+  if (history_skip)
+    {
+      for (i = 0; i < history_skip; i++)
+	entry = previous_history ();
+    }
+
+  entry = previous_history ();
+
+  history_set_pos (pos);
+
+  if (entry == 0)
+    {
+      rl_ding ();
+      return 1;
+    }
+
+  arg = history_arg_extract (count, count, entry->line);
+  if (!arg || !*arg)
+    {
+      rl_ding ();
+      FREE (arg);
+      return 1;
+    }
+
+  rl_begin_undo_group ();
+
+  _rl_set_mark_at_pos (rl_point);
+
+#if defined (VI_MODE)
+  /* Vi mode always inserts a space before yanking the argument, and it
+     inserts it right *after* rl_point. */
+  if (rl_editing_mode == vi_mode && _rl_keymap == vi_movement_keymap)
+    {
+      rl_vi_append_mode (1, key);
+      rl_insert_text (" ");
+    }
+#endif /* VI_MODE */
+
+  rl_insert_text (arg);
+  xfree (arg);
+
+  rl_end_undo_group ();
+  return 0;
+}
+
+/* Yank the COUNTth argument from the previous history line. */
+int
+rl_yank_nth_arg (int count, int key)
+{
+  return (rl_yank_nth_arg_internal (count, key, 0));
+}
+
+/* Yank the last argument from the previous history line.  This `knows'
+   how rl_yank_nth_arg treats a count of `$'.  With an argument, this
+   behaves the same as rl_yank_nth_arg. */
+int
+rl_yank_last_arg (int count, int key)
+{
+  static int history_skip = 0;
+  static int explicit_arg_p = 0;
+  static int count_passed = 1;
+  static int direction = 1;
+  static int undo_needed = 0;
+  int retval;
+
+  if (rl_last_func != rl_yank_last_arg)
+    {
+      history_skip = 0;
+      explicit_arg_p = rl_explicit_arg;
+      count_passed = count;
+      direction = 1;
+    }
+  else
+    {
+      if (undo_needed)
+	rl_do_undo ();
+      if (count < 0)		/* XXX - was < 1 */
+        direction = -direction;
+      history_skip += direction;
+      if (history_skip < 0)
+	history_skip = 0;
+    }
+ 
+  if (explicit_arg_p)
+    retval = rl_yank_nth_arg_internal (count_passed, key, history_skip);
+  else
+    retval = rl_yank_nth_arg_internal ('$', key, history_skip);
+
+  undo_needed = retval == 0;
+  return retval;
+}
+
+/* Having read the special escape sequence denoting the beginning of a
+   `bracketed paste' sequence, read the rest of the pasted input until the
+   closing sequence and return the pasted text. */
+char *
+_rl_bracketed_text (size_t *lenp)
+{
+  int c;
+  size_t len, cap;
+  char *buf;
+
+  len = 0;
+  buf = xmalloc (cap = 64);
+  buf[0] = '\0';
+
+  RL_SETSTATE (RL_STATE_MOREINPUT);
+  while ((c = rl_read_key ()) >= 0)
+    {
+      if (RL_ISSTATE (RL_STATE_MACRODEF))
+	_rl_add_macro_char (c);
+
+      if (c == '\r')		/* XXX */
+	c = '\n';
+
+      if (len == cap)
+	buf = xrealloc (buf, cap *= 2);
+
+      buf[len++] = c;
+      if (len >= BRACK_PASTE_SLEN && c == BRACK_PASTE_LAST &&
+	  STREQN (buf + len - BRACK_PASTE_SLEN, BRACK_PASTE_SUFF, BRACK_PASTE_SLEN))
+	{
+	  len -= BRACK_PASTE_SLEN;
+	  break;
+	}
+    }
+  RL_UNSETSTATE (RL_STATE_MOREINPUT);
+
+  if (c >= 0)
+    {
+      if (len == cap)
+	buf = xrealloc (buf, cap + 1);
+      buf[len] = '\0';
+    }
+
+  if (lenp)
+    *lenp = len;
+  return (buf);
+}
+
+/* Having read the special escape sequence denoting the beginning of a
+   `bracketed paste' sequence, read the rest of the pasted input until the
+   closing sequence and insert the pasted text as a single unit without
+   interpretation. Temporarily highlight the inserted text. */
+int
+rl_bracketed_paste_begin (int count, int key)
+{
+  int retval, c;
+  size_t len, cap;
+  char *buf;
+
+  buf = _rl_bracketed_text (&len);
+  rl_mark = rl_point;
+  retval = rl_insert_text (buf) == len ? 0 : 1;
+  if (_rl_enable_active_region)
+    rl_activate_mark ();
+
+  xfree (buf);
+  return (retval);
+}
+
+int
+_rl_read_bracketed_paste_prefix (int c)
+{
+  char pbuf[BRACK_PASTE_SLEN+1], *pbpref;
+  int key, ind, j;
+
+  pbpref = BRACK_PASTE_PREF;		/* XXX - debugging */
+  if (c != pbpref[0])
+    return (0);
+  pbuf[ind = 0] = c;
+  while (ind < BRACK_PASTE_SLEN-1 &&
+	 (RL_ISSTATE (RL_STATE_INPUTPENDING|RL_STATE_MACROINPUT) == 0) &&
+         _rl_pushed_input_available () == 0 &&
+         _rl_input_queued (0))
+    {
+      key = rl_read_key ();		/* XXX - for now */
+      if (key < 0)
+	break;
+      pbuf[++ind] = key;
+      if (pbuf[ind] != pbpref[ind])
+        break;
+    }
+
+  if (ind < BRACK_PASTE_SLEN-1)		/* read incomplete sequence */
+    {
+      while (ind >= 0)
+	_rl_unget_char (pbuf[ind--]);
+      return (key < 0 ? key : 0);
+    }
+  return (key < 0 ? key : 1);
+}
+
+/* Get a character from wherever we read input, handling input in bracketed
+   paste mode. If we don't have or use bracketed paste mode, this can be
+   used in place of rl_read_key(). */
+int
+_rl_bracketed_read_key ()
+{
+  int c, r;
+  char *pbuf;
+  size_t pblen;
+
+  RL_SETSTATE(RL_STATE_MOREINPUT);
+  c = rl_read_key ();
+  RL_UNSETSTATE(RL_STATE_MOREINPUT);
+
+  if (c < 0)
+    return -1;
+
+  /* read pasted data with bracketed-paste mode enabled. */
+  if (_rl_enable_bracketed_paste && c == ESC && (r = _rl_read_bracketed_paste_prefix (c)) == 1)
+    {
+      pbuf = _rl_bracketed_text (&pblen);
+      if (pblen == 0)
+	{
+	  xfree (pbuf);
+	  return 0;		/* XXX */
+	}
+      c = (unsigned char)pbuf[0];
+      if (pblen > 1)
+	{
+	  while (--pblen > 0)
+	    _rl_unget_char ((unsigned char)pbuf[pblen]);
+	}
+      xfree (pbuf);
+    }
+
+  return c;
+}
+
+/* Get a character from wherever we read input, handling input in bracketed
+   paste mode. If we don't have or use bracketed paste mode, this can be
+   used in place of rl_read_key(). */
+int
+_rl_bracketed_read_mbstring (char *mb, int mlen)
+{
+  int c, r;
+
+  c = _rl_bracketed_read_key ();
+  if (c < 0)
+    return -1;
+
+#if defined (HANDLE_MULTIBYTE)
+  if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+    c = _rl_read_mbstring (c, mb, mlen);
+  else
+#endif
+    mb[0] = c;
+  mb[mlen] = '\0';		/* just in case */
+
+  return c;
+}
+
+/* A special paste command for Windows users. */
+#if defined (_WIN32)
+#include <windows.h>
+
+int
+rl_paste_from_clipboard (int count, int key)
+{
+  char *data, *ptr;
+  int len;
+
+  if (OpenClipboard (NULL) == 0)
+    return (0);
+
+  data = (char *)GetClipboardData (CF_TEXT);
+  if (data)
+    {
+      ptr = strchr (data, '\r');
+      if (ptr)
+	{
+	  len = ptr - data;
+	  ptr = (char *)xmalloc (len + 1);
+	  ptr[len] = '\0';
+	  strncpy (ptr, data, len);
+	}
+      else
+        ptr = data;
+      _rl_set_mark_at_pos (rl_point);
+      rl_insert_text (ptr);
+      if (ptr != data)
+	xfree (ptr);
+      CloseClipboard ();
+    }
+  return (0);
+}
+#endif /* _WIN32 */
diff --git a/lib/readline/macro.c b/lib/readline/macro.c
new file mode 100644
index 0000000..92cc55c
--- /dev/null
+++ b/lib/readline/macro.c
@@ -0,0 +1,332 @@
+/* macro.c -- keyboard macros for readline. */
+
+/* Copyright (C) 1994-2009,2017 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <sys/types.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>           /* for _POSIX_VERSION */
+#endif /* HAVE_UNISTD_H */
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#include <stdio.h>
+
+/* System-specific feature definitions and include files. */
+#include "rldefs.h"
+
+/* Some standard library routines. */
+#include "readline.h"
+#include "history.h"
+
+#include "rlprivate.h"
+#include "xmalloc.h"
+
+#define MAX_MACRO_LEVEL 16
+
+/* **************************************************************** */
+/*								    */
+/*			Hacking Keyboard Macros 		    */
+/*								    */
+/* **************************************************************** */
+
+/* The currently executing macro string.  If this is non-zero,
+   then it is a malloc ()'ed string where input is coming from. */
+char *rl_executing_macro = (char *)NULL;
+
+/* The offset in the above string to the next character to be read. */
+static int executing_macro_index;
+
+/* The current macro string being built.  Characters get stuffed
+   in here by add_macro_char (). */
+static char *current_macro = (char *)NULL;
+
+/* The size of the buffer allocated to current_macro. */
+static int current_macro_size;
+
+/* The index at which characters are being added to current_macro. */
+static int current_macro_index;
+
+/* A structure used to save nested macro strings.
+   It is a linked list of string/index for each saved macro. */
+struct saved_macro {
+  struct saved_macro *next;
+  char *string;
+  int sindex;
+};
+
+/* The list of saved macros. */
+static struct saved_macro *macro_list = (struct saved_macro *)NULL;
+
+static int macro_level = 0;
+
+/* Set up to read subsequent input from STRING.
+   STRING is free ()'ed when we are done with it. */
+void
+_rl_with_macro_input (char *string)
+{
+  if (macro_level > MAX_MACRO_LEVEL)
+    {
+      _rl_errmsg ("maximum macro execution nesting level exceeded");
+      _rl_abort_internal ();
+      return;
+    }
+
+#if 0
+  if (rl_executing_macro)		/* XXX - later */
+#endif
+    _rl_push_executing_macro ();
+  rl_executing_macro = string;
+  executing_macro_index = 0;
+  RL_SETSTATE(RL_STATE_MACROINPUT);
+}
+
+/* Return the next character available from a macro, or 0 if
+   there are no macro characters. */
+int
+_rl_next_macro_key (void)
+{
+  int c;
+
+  if (rl_executing_macro == 0)
+    return (0);
+
+  if (rl_executing_macro[executing_macro_index] == 0)
+    {
+      _rl_pop_executing_macro ();
+      return (_rl_next_macro_key ());
+    }
+
+#if defined (READLINE_CALLBACKS)
+  c = rl_executing_macro[executing_macro_index++];
+  if (RL_ISSTATE (RL_STATE_CALLBACK) && RL_ISSTATE (RL_STATE_READCMD|RL_STATE_MOREINPUT) && rl_executing_macro[executing_macro_index] == 0)
+      _rl_pop_executing_macro ();
+  return c;
+#else
+  /* XXX - consider doing the same as the callback code, just not testing
+     whether we're running in callback mode */
+  return (rl_executing_macro[executing_macro_index++]);
+#endif
+}
+
+int
+_rl_peek_macro_key (void)
+{
+  if (rl_executing_macro == 0)
+    return (0);
+  if (rl_executing_macro[executing_macro_index] == 0 && (macro_list == 0 || macro_list->string == 0))
+    return (0);
+  if (rl_executing_macro[executing_macro_index] == 0 && macro_list && macro_list->string)
+    return (macro_list->string[0]);
+  return (rl_executing_macro[executing_macro_index]);
+}
+
+int
+_rl_prev_macro_key (void)
+{
+  if (rl_executing_macro == 0)
+    return (0);
+
+  if (executing_macro_index == 0)
+    return (0);
+
+  executing_macro_index--;
+  return (rl_executing_macro[executing_macro_index]);
+}
+
+/* Save the currently executing macro on a stack of saved macros. */
+void
+_rl_push_executing_macro (void)
+{
+  struct saved_macro *saver;
+
+  saver = (struct saved_macro *)xmalloc (sizeof (struct saved_macro));
+  saver->next = macro_list;
+  saver->sindex = executing_macro_index;
+  saver->string = rl_executing_macro;
+
+  macro_list = saver;
+
+  macro_level++;
+}
+
+/* Discard the current macro, replacing it with the one
+   on the top of the stack of saved macros. */
+void
+_rl_pop_executing_macro (void)
+{
+  struct saved_macro *macro;
+
+  FREE (rl_executing_macro);
+  rl_executing_macro = (char *)NULL;
+  executing_macro_index = 0;
+
+  if (macro_list)
+    {
+      macro = macro_list;
+      rl_executing_macro = macro_list->string;
+      executing_macro_index = macro_list->sindex;
+      macro_list = macro_list->next;
+      xfree (macro);
+    }
+
+  macro_level--;
+
+  if (rl_executing_macro == 0)
+    RL_UNSETSTATE(RL_STATE_MACROINPUT);
+}
+
+/* Add a character to the macro being built. */
+void
+_rl_add_macro_char (int c)
+{
+  if (current_macro_index + 1 >= current_macro_size)
+    {
+      if (current_macro == 0)
+	current_macro = (char *)xmalloc (current_macro_size = 25);
+      else
+	current_macro = (char *)xrealloc (current_macro, current_macro_size += 25);
+    }
+
+  current_macro[current_macro_index++] = c;
+  current_macro[current_macro_index] = '\0';
+}
+
+void
+_rl_kill_kbd_macro (void)
+{
+  if (current_macro)
+    {
+      xfree (current_macro);
+      current_macro = (char *) NULL;
+    }
+  current_macro_size = current_macro_index = 0;
+
+  FREE (rl_executing_macro);
+  rl_executing_macro = (char *) NULL;
+  executing_macro_index = 0;
+
+  RL_UNSETSTATE(RL_STATE_MACRODEF);
+}
+
+/* Begin defining a keyboard macro.
+   Keystrokes are recorded as they are executed.
+   End the definition with rl_end_kbd_macro ().
+   If a numeric argument was explicitly typed, then append this
+   definition to the end of the existing macro, and start by
+   re-executing the existing macro. */
+int
+rl_start_kbd_macro (int ignore1, int ignore2)
+{
+  if (RL_ISSTATE (RL_STATE_MACRODEF))
+    {
+      _rl_abort_internal ();
+      return 1;
+    }
+
+  if (rl_explicit_arg)
+    {
+      if (current_macro)
+	_rl_with_macro_input (savestring (current_macro));
+    }
+  else
+    current_macro_index = 0;
+
+  RL_SETSTATE(RL_STATE_MACRODEF);
+  return 0;
+}
+
+/* Stop defining a keyboard macro.
+   A numeric argument says to execute the macro right now,
+   that many times, counting the definition as the first time. */
+int
+rl_end_kbd_macro (int count, int ignore)
+{
+  if (RL_ISSTATE (RL_STATE_MACRODEF) == 0)
+    {
+      _rl_abort_internal ();
+      return 1;
+    }
+
+  current_macro_index -= rl_key_sequence_length;
+  current_macro[current_macro_index] = '\0';
+
+  RL_UNSETSTATE(RL_STATE_MACRODEF);
+
+  return (rl_call_last_kbd_macro (--count, 0));
+}
+
+/* Execute the most recently defined keyboard macro.
+   COUNT says how many times to execute it. */
+int
+rl_call_last_kbd_macro (int count, int ignore)
+{
+  if (current_macro == 0)
+    _rl_abort_internal ();
+
+  if (RL_ISSTATE (RL_STATE_MACRODEF))
+    {
+      rl_ding ();		/* no recursive macros */
+      current_macro[--current_macro_index] = '\0';	/* erase this char */
+      return 0;
+    }
+
+  while (count--)
+    _rl_with_macro_input (savestring (current_macro));
+  return 0;
+}
+
+int
+rl_print_last_kbd_macro (int count, int ignore)
+{
+  char *m;
+
+  if (current_macro == 0)
+    {
+      rl_ding ();
+      return 0;
+    }
+  m = _rl_untranslate_macro_value (current_macro, 1);
+  rl_crlf ();
+  printf ("%s", m);
+  fflush (stdout);
+  rl_crlf ();
+  FREE (m);
+  rl_forced_update_display ();
+  rl_display_fixed = 1;
+
+  return 0;
+}
+
+void
+rl_push_macro_input (char *macro)
+{
+  _rl_with_macro_input (macro);
+}
diff --git a/lib/readline/mbutil.c b/lib/readline/mbutil.c
new file mode 100644
index 0000000..dc62b4c
--- /dev/null
+++ b/lib/readline/mbutil.c
@@ -0,0 +1,524 @@
+/* mbutil.c -- readline multibyte character utility functions */
+
+/* Copyright (C) 2001-2020 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <sys/types.h>
+#include <fcntl.h>
+#include "posixjmp.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>	   /* for _POSIX_VERSION */
+#endif /* HAVE_UNISTD_H */
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#include <stdio.h>
+#include <ctype.h>
+
+/* System-specific feature definitions and include files. */
+#include "rldefs.h"
+#include "rlmbutil.h"
+
+#if defined (TIOCSTAT_IN_SYS_IOCTL)
+#  include <sys/ioctl.h>
+#endif /* TIOCSTAT_IN_SYS_IOCTL */
+
+/* Some standard library routines. */
+#include "readline.h"
+
+#include "rlprivate.h"
+#include "xmalloc.h"
+
+/* Declared here so it can be shared between the readline and history
+   libraries. */
+#if defined (HANDLE_MULTIBYTE)
+int rl_byte_oriented = 0;
+#else
+int rl_byte_oriented = 1;
+#endif
+
+/* Ditto */
+int _rl_utf8locale = 0;
+
+/* **************************************************************** */
+/*								    */
+/*		Multibyte Character Utility Functions		    */
+/*								    */
+/* **************************************************************** */
+
+#if defined(HANDLE_MULTIBYTE)
+
+/* **************************************************************** */
+/*								    */
+/*		UTF-8 specific Character Utility Functions	    */
+/*								    */
+/* **************************************************************** */
+
+/* Return the length in bytes of the possibly-multibyte character beginning
+   at S. Encoding is UTF-8. */
+static int
+_rl_utf8_mblen (const char *s, size_t n)
+{
+  unsigned char c, c1, c2, c3;
+
+  if (s == 0)
+    return (0);	/* no shift states */
+  if (n <= 0)
+    return (-1);
+
+  c = (unsigned char)*s;
+  if (c < 0x80)
+    return (c != 0);
+  if (c >= 0xc2)
+    {
+      c1 = (unsigned char)s[1];
+      if (c < 0xe0)
+	{
+	  if (n == 1)
+	    return -2;
+	  if (n >= 2 && (c1 ^ 0x80) < 0x40)
+	    return 2;
+	}
+      else if (c < 0xf0)
+	{
+	  if (n == 1)
+	    return -2;
+	  if ((c1 ^ 0x80) < 0x40
+		&& (c >= 0xe1 || c1 >= 0xa0)
+		&& (c != 0xed || c1 < 0xa0))
+	    {
+	      if (n == 2)
+		return -2;
+	      c2 = (unsigned char)s[2];
+	      if ((c2 ^ 0x80) < 0x40)
+		return 3;
+	    }
+	}
+      else if (c < 0xf4)
+	{
+	  if (n == 1)
+	    return -2;
+	  if (((c1 ^ 0x80) < 0x40)
+		&& (c >= 0xf1 || c1 >= 0x90)
+		&& (c < 0xf4 || (c == 0xf4 && c1 < 0x90)))
+	    {
+	      if (n == 2)
+		return -2;
+	      c2 = (unsigned char)s[2];
+	      if ((c2 ^ 0x80) < 0x40)
+		{
+		  if (n == 3)
+		    return -2;
+		  c3 = (unsigned char)s[3];
+		  if ((c3 ^ 0x80) < 0x40)
+		    return 4;
+		}
+	    }
+	}
+    }
+  /* invalid or incomplete multibyte character */
+  return -1;
+}
+
+static int
+_rl_find_next_mbchar_internal (char *string, int seed, int count, int find_non_zero)
+{
+  size_t tmp, len;
+  mbstate_t ps;
+  int point;
+  wchar_t wc;
+
+  tmp = 0;
+
+  memset(&ps, 0, sizeof (mbstate_t));
+  if (seed < 0)
+    seed = 0;
+  if (count <= 0)
+    return seed;
+
+  point = seed + _rl_adjust_point (string, seed, &ps);
+  /* if _rl_adjust_point returns -1, the character or string is invalid.
+     treat as a byte. */
+  if (point == seed - 1)	/* invalid */
+    return seed + 1;
+    
+  /* if this is true, means that seed was not pointing to a byte indicating
+     the beginning of a multibyte character.  Correct the point and consume
+     one char. */
+  if (seed < point)
+    count--;
+
+  while (count > 0)  
+    {
+      len = strlen (string + point);
+      if (len == 0)
+	break;
+      if (_rl_utf8locale && UTF8_SINGLEBYTE(string[point]))
+	{
+	  tmp = 1;
+	  wc = (wchar_t) string[point];
+	  memset(&ps, 0, sizeof(mbstate_t));
+	}
+      else
+	tmp = mbrtowc (&wc, string+point, len, &ps);
+      if (MB_INVALIDCH ((size_t)tmp))
+	{
+	  /* invalid bytes. assume a byte represents a character */
+	  point++;
+	  count--;
+	  /* reset states. */
+	  memset(&ps, 0, sizeof(mbstate_t));
+	}
+      else if (MB_NULLWCH (tmp))
+	break;			/* found wide '\0' */
+      else
+	{
+	  /* valid bytes */
+	  point += tmp;
+	  if (find_non_zero)
+	    {
+	      if (WCWIDTH (wc) == 0)
+		continue;
+	      else
+		count--;
+	    }
+	  else
+	    count--;
+	}
+    }
+
+  if (find_non_zero)
+    {
+      tmp = mbrtowc (&wc, string + point, strlen (string + point), &ps);
+      while (MB_NULLWCH (tmp) == 0 && MB_INVALIDCH (tmp) == 0 && WCWIDTH (wc) == 0)
+	{
+	  point += tmp;
+	  tmp = mbrtowc (&wc, string + point, strlen (string + point), &ps);
+	}
+    }
+
+  return point;
+}
+
+static inline int
+_rl_test_nonzero (char *string, int ind, int len)
+{
+  size_t tmp;
+  wchar_t wc;
+  mbstate_t ps;
+
+  memset (&ps, 0, sizeof (mbstate_t));
+  tmp = mbrtowc (&wc, string + ind, len - ind, &ps);
+  /* treat invalid multibyte sequences as non-zero-width */
+  return (MB_INVALIDCH (tmp) || MB_NULLWCH (tmp) || WCWIDTH (wc) > 0);
+}
+
+/* experimental -- needs to handle zero-width characters better */
+static int
+_rl_find_prev_utf8char (char *string, int seed, int find_non_zero)
+{
+  char *s;
+  unsigned char b;
+  int save, prev;
+  size_t len;
+
+  if (find_non_zero)
+    len = RL_STRLEN (string);
+
+  prev = seed - 1;
+  while (prev >= 0)
+   {
+      b = (unsigned char)string[prev];
+      if (UTF8_SINGLEBYTE (b))
+	return (prev);
+
+      save = prev;
+
+      /* Move back until we're not in the middle of a multibyte char */
+      if (UTF8_MBCHAR (b))
+	{
+	  while (prev > 0 && (b = (unsigned char)string[--prev]) && UTF8_MBCHAR (b))
+	    ;
+	}
+
+      if (UTF8_MBFIRSTCHAR (b))
+	{
+	  if (find_non_zero)
+	    {
+	      if (_rl_test_nonzero (string, prev, len))
+		return (prev);
+	      else		/* valid but WCWIDTH (wc) == 0 */
+		prev = prev - 1;
+	    }
+	  else
+	    return (prev);
+	}
+      else
+	return (save);			/* invalid utf-8 multibyte sequence */
+    }
+
+  return ((prev < 0) ? 0 : prev);
+}  
+
+/*static*/ int
+_rl_find_prev_mbchar_internal (char *string, int seed, int find_non_zero)
+{
+  mbstate_t ps;
+  int prev, non_zero_prev, point, length;
+  size_t tmp;
+  wchar_t wc;
+
+  if (_rl_utf8locale)
+    return (_rl_find_prev_utf8char (string, seed, find_non_zero));
+
+  memset(&ps, 0, sizeof(mbstate_t));
+  length = strlen(string);
+  
+  if (seed < 0)
+    return 0;
+  else if (length < seed)
+    return length;
+
+  prev = non_zero_prev = point = 0;
+  while (point < seed)
+    {
+      if (_rl_utf8locale && UTF8_SINGLEBYTE(string[point]))
+	{
+	  tmp = 1;
+	  wc = (wchar_t) string[point];
+	  memset(&ps, 0, sizeof(mbstate_t));
+	}
+      else
+	tmp = mbrtowc (&wc, string + point, length - point, &ps);
+      if (MB_INVALIDCH ((size_t)tmp))
+	{
+	  /* in this case, bytes are invalid or too short to compose
+	     multibyte char, so assume that the first byte represents
+	     a single character anyway. */
+	  tmp = 1;
+	  /* clear the state of the byte sequence, because
+	     in this case effect of mbstate is undefined  */
+	  memset(&ps, 0, sizeof (mbstate_t));
+
+	  /* Since we're assuming that this byte represents a single
+	     non-zero-width character, don't forget about it. */
+	  prev = point;
+	}
+      else if (MB_NULLWCH (tmp))
+	break;			/* Found '\0' char.  Can this happen? */
+      else
+	{
+	  if (find_non_zero)
+	    {
+	      if (WCWIDTH (wc) != 0)
+		prev = point;
+	    }
+	  else
+	    prev = point;  
+	}
+
+      point += tmp;
+    }
+
+  return prev;
+}
+
+/* return the number of bytes parsed from the multibyte sequence starting
+   at src, if a non-L'\0' wide character was recognized. It returns 0, 
+   if a L'\0' wide character was recognized. It  returns (size_t)(-1), 
+   if an invalid multibyte sequence was encountered. It returns (size_t)(-2) 
+   if it couldn't parse a complete  multibyte character.  */
+int
+_rl_get_char_len (char *src, mbstate_t *ps)
+{
+  size_t tmp, l;
+  int mb_cur_max;
+
+  /* Look at no more than MB_CUR_MAX characters */
+  l = (size_t)strlen (src);
+  if (_rl_utf8locale && l > 0 && UTF8_SINGLEBYTE(*src))
+    tmp = (*src != 0) ? 1 : 0;
+  else
+    {
+      mb_cur_max = MB_CUR_MAX;
+      tmp = mbrlen((const char *)src, (l < mb_cur_max) ? l : mb_cur_max, ps);
+    }
+  if (tmp == (size_t)(-2))
+    {
+      /* too short to compose multibyte char */
+      if (ps)
+	memset (ps, 0, sizeof(mbstate_t));
+      return -2;
+    }
+  else if (tmp == (size_t)(-1))
+    {
+      /* invalid to compose multibyte char */
+      /* initialize the conversion state */
+      if (ps)
+	memset (ps, 0, sizeof(mbstate_t));
+      return -1;
+    }
+  else if (tmp == (size_t)0)
+    return 0;
+  else
+    return (int)tmp;
+}
+
+/* compare the specified two characters. If the characters matched,
+   return 1. Otherwise return 0. */
+int
+_rl_compare_chars (char *buf1, int pos1, mbstate_t *ps1, char *buf2, int pos2, mbstate_t *ps2)
+{
+  int i, w1, w2;
+
+  if ((w1 = _rl_get_char_len (&buf1[pos1], ps1)) <= 0 || 
+	(w2 = _rl_get_char_len (&buf2[pos2], ps2)) <= 0 ||
+	(w1 != w2) ||
+	(buf1[pos1] != buf2[pos2]))
+    return 0;
+
+  for (i = 1; i < w1; i++)
+    if (buf1[pos1+i] != buf2[pos2+i])
+      return 0;
+
+  return 1;
+}
+
+/* adjust pointed byte and find mbstate of the point of string.
+   adjusted point will be point <= adjusted_point, and returns
+   differences of the byte(adjusted_point - point).
+   if point is invalid (point < 0 || more than string length),
+   it returns -1 */
+int
+_rl_adjust_point (char *string, int point, mbstate_t *ps)
+{
+  size_t tmp;
+  int length, pos;
+
+  tmp = 0;
+  pos = 0;
+  length = strlen(string);
+  if (point < 0)
+    return -1;
+  if (length < point)
+    return -1;
+  
+  while (pos < point)
+    {
+      if (_rl_utf8locale && UTF8_SINGLEBYTE(string[pos]))
+	tmp = 1;
+      else
+	tmp = mbrlen (string + pos, length - pos, ps);
+      if (MB_INVALIDCH ((size_t)tmp))
+	{
+	  /* in this case, bytes are invalid or too short to compose
+	     multibyte char, so assume that the first byte represents
+	     a single character anyway. */
+	  pos++;
+	  /* clear the state of the byte sequence, because
+	     in this case effect of mbstate is undefined  */
+	  if (ps)
+	    memset (ps, 0, sizeof (mbstate_t));
+	}
+      else if (MB_NULLWCH (tmp))
+	pos++;
+      else
+	pos += tmp;
+    }
+
+  return (pos - point);
+}
+
+int
+_rl_is_mbchar_matched (char *string, int seed, int end, char *mbchar, int length)
+{
+  int i;
+
+  if ((end - seed) < length)
+    return 0;
+
+  for (i = 0; i < length; i++)
+    if (string[seed + i] != mbchar[i])
+      return 0;
+  return 1;
+}
+
+wchar_t
+_rl_char_value (char *buf, int ind)
+{
+  size_t tmp;
+  wchar_t wc;
+  mbstate_t ps;
+  int l;
+
+  if (MB_LEN_MAX == 1 || rl_byte_oriented)
+    return ((wchar_t) buf[ind]);
+  if (_rl_utf8locale && UTF8_SINGLEBYTE(buf[ind]))
+    return ((wchar_t) buf[ind]);
+  l = strlen (buf);
+  if (ind >= l - 1)
+    return ((wchar_t) buf[ind]);
+  if (l < ind)			/* Sanity check */
+    l = strlen (buf+ind);
+  memset (&ps, 0, sizeof (mbstate_t));
+  tmp = mbrtowc (&wc, buf + ind, l - ind, &ps);
+  if (MB_INVALIDCH (tmp) || MB_NULLWCH (tmp))  
+    return ((wchar_t) buf[ind]);
+  return wc;
+}
+#endif /* HANDLE_MULTIBYTE */
+
+/* Find next `count' characters started byte point of the specified seed.
+   If flags is MB_FIND_NONZERO, we look for non-zero-width multibyte
+   characters. */
+#undef _rl_find_next_mbchar
+int
+_rl_find_next_mbchar (char *string, int seed, int count, int flags)
+{
+#if defined (HANDLE_MULTIBYTE)
+  return _rl_find_next_mbchar_internal (string, seed, count, flags);
+#else
+  return (seed + count);
+#endif
+}
+
+/* Find previous character started byte point of the specified seed.
+   Returned point will be point <= seed.  If flags is MB_FIND_NONZERO,
+   we look for non-zero-width multibyte characters. */
+#undef _rl_find_prev_mbchar
+int
+_rl_find_prev_mbchar (char *string, int seed, int flags)
+{
+#if defined (HANDLE_MULTIBYTE)
+  return _rl_find_prev_mbchar_internal (string, seed, flags);
+#else
+  return ((seed == 0) ? seed : seed - 1);
+#endif
+}
diff --git a/lib/readline/misc.c b/lib/readline/misc.c
new file mode 100644
index 0000000..3d9a674
--- /dev/null
+++ b/lib/readline/misc.c
@@ -0,0 +1,737 @@
+/* misc.c -- miscellaneous bindable readline functions. */
+
+/* Copyright (C) 1987-2019 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif /* HAVE_UNISTD_H */
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#if defined (HAVE_LOCALE_H)
+#  include <locale.h>
+#endif
+
+#include <stdio.h>
+
+/* System-specific feature definitions and include files. */
+#include "rldefs.h"
+#include "rlmbutil.h"
+
+/* Some standard library routines. */
+#include "readline.h"
+#include "history.h"
+
+#include "rlprivate.h"
+#include "rlshell.h"
+#include "xmalloc.h"
+
+static int rl_digit_loop PARAMS((void));
+static void _rl_history_set_point PARAMS((void));
+
+/* Forward declarations used in this file */
+void _rl_free_history_entry PARAMS((HIST_ENTRY *));
+
+/* If non-zero, rl_get_previous_history and rl_get_next_history attempt
+   to preserve the value of rl_point from line to line. */
+int _rl_history_preserve_point = 0;
+
+_rl_arg_cxt _rl_argcxt;
+
+/* Saved target point for when _rl_history_preserve_point is set.  Special
+   value of -1 means that point is at the end of the line. */
+int _rl_history_saved_point = -1;
+
+/* **************************************************************** */
+/*								    */
+/*			Numeric Arguments			    */
+/*								    */
+/* **************************************************************** */
+
+int
+_rl_arg_overflow (void)
+{
+  if (rl_numeric_arg > 1000000)
+    {
+      _rl_argcxt = 0;
+      rl_explicit_arg = rl_numeric_arg = 0;
+      rl_ding ();
+      rl_restore_prompt ();
+      rl_clear_message ();
+      RL_UNSETSTATE(RL_STATE_NUMERICARG);
+      return 1;
+    }
+  return 0;
+}
+
+void
+_rl_arg_init (void)
+{
+  rl_save_prompt ();
+  _rl_argcxt = 0;
+  RL_SETSTATE(RL_STATE_NUMERICARG);
+}
+
+int
+_rl_arg_getchar (void)
+{
+  int c;
+
+  rl_message ("(arg: %d) ", rl_arg_sign * rl_numeric_arg);
+  RL_SETSTATE(RL_STATE_MOREINPUT);
+  c = rl_read_key ();
+  RL_UNSETSTATE(RL_STATE_MOREINPUT);
+
+  return c;
+}
+
+/* Process C as part of the current numeric argument.  Return -1 if the
+   argument should be aborted, 0 if we should not read any more chars, and
+   1 if we should continue to read chars. */
+int
+_rl_arg_dispatch (_rl_arg_cxt cxt, int c)
+{
+  int key, r;
+
+  key = c;
+
+  /* If we see a key bound to `universal-argument' after seeing digits,
+      it ends the argument but is otherwise ignored. */
+  if (c >= 0 && _rl_keymap[c].type == ISFUNC && _rl_keymap[c].function == rl_universal_argument)
+    {
+      if ((cxt & NUM_SAWDIGITS) == 0)
+	{
+	  rl_numeric_arg *= 4;
+	  return 1;
+	}
+      else if (RL_ISSTATE (RL_STATE_CALLBACK))
+        {
+          _rl_argcxt |= NUM_READONE;
+          return 0;	/* XXX */
+        }
+      else
+	{
+	  key = _rl_bracketed_read_key ();
+	  rl_restore_prompt ();
+	  rl_clear_message ();
+	  RL_UNSETSTATE(RL_STATE_NUMERICARG);
+	  if (key < 0)
+	    return -1;
+	  return (_rl_dispatch (key, _rl_keymap));
+	}
+    }
+
+  c = UNMETA (c);
+
+  if (_rl_digit_p (c))
+    {
+      r = _rl_digit_value (c);    	
+      rl_numeric_arg = rl_explicit_arg ? (rl_numeric_arg * 10) +  r : r;
+      rl_explicit_arg = 1;
+      _rl_argcxt |= NUM_SAWDIGITS;
+    }
+  else if (c == '-' && rl_explicit_arg == 0)
+    {
+      rl_numeric_arg = 1;
+      _rl_argcxt |= NUM_SAWMINUS;
+      rl_arg_sign = -1;
+    }
+  else
+    {
+      /* Make M-- command equivalent to M--1 command. */
+      if ((_rl_argcxt & NUM_SAWMINUS) && rl_numeric_arg == 1 && rl_explicit_arg == 0)
+	rl_explicit_arg = 1;
+      rl_restore_prompt ();
+      rl_clear_message ();
+      RL_UNSETSTATE(RL_STATE_NUMERICARG);
+
+      r = _rl_dispatch (key, _rl_keymap);
+      if (RL_ISSTATE (RL_STATE_CALLBACK))
+	{
+	  /* At worst, this will cause an extra redisplay.  Otherwise,
+	     we have to wait until the next character comes in. */
+	  if (rl_done == 0)
+	    (*rl_redisplay_function) ();
+	  r = 0;
+	}
+      return r;
+    }
+
+  return 1;
+}
+
+/* Handle C-u style numeric args, as well as M--, and M-digits. */
+static int
+rl_digit_loop (void)
+{
+  int c, r;
+
+  while (1)
+    {
+      if (_rl_arg_overflow ())
+	return 1;
+
+      c = _rl_arg_getchar ();
+
+      if (c < 0)
+	{
+	  _rl_abort_internal ();
+	  return -1;
+	}
+
+      r = _rl_arg_dispatch (_rl_argcxt, c);
+      if (r <= 0 || (RL_ISSTATE (RL_STATE_NUMERICARG) == 0))
+        break;
+    }
+
+  return r;
+}
+
+/* Create a default argument. */
+void
+_rl_reset_argument (void)
+{
+  rl_numeric_arg = rl_arg_sign = 1;
+  rl_explicit_arg = 0;
+  _rl_argcxt = 0;
+}
+
+/* Start a numeric argument with initial value KEY */
+int
+rl_digit_argument (int ignore, int key)
+{
+  _rl_arg_init ();
+  if (RL_ISSTATE (RL_STATE_CALLBACK))
+    {
+      _rl_arg_dispatch (_rl_argcxt, key);
+      rl_message ("(arg: %d) ", rl_arg_sign * rl_numeric_arg);
+      return 0;
+    }
+  else
+    {
+      rl_execute_next (key);
+      return (rl_digit_loop ());
+    }
+}
+
+/* C-u, universal argument.  Multiply the current argument by 4.
+   Read a key.  If the key has nothing to do with arguments, then
+   dispatch on it.  If the key is the abort character then abort. */
+int
+rl_universal_argument (int count, int key)
+{
+  _rl_arg_init ();
+  rl_numeric_arg *= 4;
+
+  return (RL_ISSTATE (RL_STATE_CALLBACK) ? 0 : rl_digit_loop ());
+}
+
+int
+_rl_arg_callback (_rl_arg_cxt cxt)
+{
+  int c, r;
+
+  c = _rl_arg_getchar ();
+  if (c < 0)
+    return (1);		/* EOF */
+
+  if (_rl_argcxt & NUM_READONE)
+    {
+      _rl_argcxt &= ~NUM_READONE;
+      rl_restore_prompt ();
+      rl_clear_message ();
+      RL_UNSETSTATE(RL_STATE_NUMERICARG);
+      rl_execute_next (c);
+      return 0;
+    }
+
+  r = _rl_arg_dispatch (cxt, c);
+  if (r > 0)
+    rl_message ("(arg: %d) ", rl_arg_sign * rl_numeric_arg);
+  return (r != 1);
+}
+
+/* What to do when you abort reading an argument. */
+int
+rl_discard_argument (void)
+{
+  rl_ding ();
+  rl_clear_message ();
+  _rl_reset_argument ();
+
+  return 0;
+}
+
+/* **************************************************************** */
+/*								    */
+/*			History Utilities			    */
+/*								    */
+/* **************************************************************** */
+
+/* We already have a history library, and that is what we use to control
+   the history features of readline.  This is our local interface to
+   the history mechanism. */
+
+/* While we are editing the history, this is the saved
+   version of the original line. */
+HIST_ENTRY *_rl_saved_line_for_history = (HIST_ENTRY *)NULL;
+
+/* Set the history pointer back to the last entry in the history. */
+void
+_rl_start_using_history (void)
+{
+  using_history ();
+  if (_rl_saved_line_for_history)
+    _rl_free_history_entry (_rl_saved_line_for_history);
+
+  _rl_saved_line_for_history = (HIST_ENTRY *)NULL;
+}
+
+/* Free the contents (and containing structure) of a HIST_ENTRY. */
+void
+_rl_free_history_entry (HIST_ENTRY *entry)
+{
+  if (entry == 0)
+    return;
+
+  FREE (entry->line);
+  FREE (entry->timestamp);
+
+  xfree (entry);
+}
+
+/* Perhaps put back the current line if it has changed. */
+int
+rl_maybe_replace_line (void)
+{
+  HIST_ENTRY *temp;
+
+  temp = current_history ();
+  /* If the current line has changed, save the changes. */
+  if (temp && ((UNDO_LIST *)(temp->data) != rl_undo_list))
+    {
+      temp = replace_history_entry (where_history (), rl_line_buffer, (histdata_t)rl_undo_list);
+      xfree (temp->line);
+      FREE (temp->timestamp);
+      xfree (temp);
+    }
+  return 0;
+}
+
+/* Restore the _rl_saved_line_for_history if there is one. */
+int
+rl_maybe_unsave_line (void)
+{
+  if (_rl_saved_line_for_history)
+    {
+      /* Can't call with `1' because rl_undo_list might point to an undo
+	 list from a history entry, as in rl_replace_from_history() below. */
+      rl_replace_line (_rl_saved_line_for_history->line, 0);
+      rl_undo_list = (UNDO_LIST *)_rl_saved_line_for_history->data;
+      _rl_free_history_entry (_rl_saved_line_for_history);
+      _rl_saved_line_for_history = (HIST_ENTRY *)NULL;
+      rl_point = rl_end;	/* rl_replace_line sets rl_end */
+    }
+  else
+    rl_ding ();
+  return 0;
+}
+
+/* Save the current line in _rl_saved_line_for_history. */
+int
+rl_maybe_save_line (void)
+{
+  if (_rl_saved_line_for_history == 0)
+    {
+      _rl_saved_line_for_history = (HIST_ENTRY *)xmalloc (sizeof (HIST_ENTRY));
+      _rl_saved_line_for_history->line = savestring (rl_line_buffer);
+      _rl_saved_line_for_history->timestamp = (char *)NULL;
+      _rl_saved_line_for_history->data = (char *)rl_undo_list;
+    }
+
+  return 0;
+}
+
+int
+_rl_free_saved_history_line (void)
+{
+  if (_rl_saved_line_for_history)
+    {
+      _rl_free_history_entry (_rl_saved_line_for_history);
+      _rl_saved_line_for_history = (HIST_ENTRY *)NULL;
+    }
+  return 0;
+}
+
+static void
+_rl_history_set_point (void)
+{
+  rl_point = (_rl_history_preserve_point && _rl_history_saved_point != -1)
+		? _rl_history_saved_point
+		: rl_end;
+  if (rl_point > rl_end)
+    rl_point = rl_end;
+
+#if defined (VI_MODE)
+  if (rl_editing_mode == vi_mode && _rl_keymap != vi_insertion_keymap)
+    rl_point = 0;
+#endif /* VI_MODE */
+
+  if (rl_editing_mode == emacs_mode)
+    rl_mark = (rl_point == rl_end ? 0 : rl_end);
+}
+
+void
+rl_replace_from_history (HIST_ENTRY *entry, int flags)
+{
+  /* Can't call with `1' because rl_undo_list might point to an undo list
+     from a history entry, just like we're setting up here. */
+  rl_replace_line (entry->line, 0);
+  rl_undo_list = (UNDO_LIST *)entry->data;
+  rl_point = rl_end;
+  rl_mark = 0;
+
+#if defined (VI_MODE)
+  if (rl_editing_mode == vi_mode)
+    {
+      rl_point = 0;
+      rl_mark = rl_end;
+    }
+#endif
+}
+
+/* Process and free undo lists attached to each history entry prior to the
+   current entry, inclusive, reverting each line to its saved state.  This 
+   is destructive, and state about the current line is lost.  This is not
+   intended to be called while actively editing, and the current line is
+   not assumed to have been added to the history list. */
+void
+_rl_revert_previous_lines (void)
+{
+  int hpos;
+  HIST_ENTRY *entry;
+  UNDO_LIST *ul, *saved_undo_list;
+  char *lbuf;
+
+  lbuf = savestring (rl_line_buffer);
+  saved_undo_list = rl_undo_list;
+  hpos = where_history ();
+
+  entry = (hpos == history_length) ? previous_history () : current_history ();
+  while (entry)
+    {
+      if (ul = (UNDO_LIST *)entry->data)
+	{
+	  if (ul == saved_undo_list)
+	    saved_undo_list = 0;
+	  /* Set up rl_line_buffer and other variables from history entry */
+	  rl_replace_from_history (entry, 0);	/* entry->line is now current */
+	  entry->data = 0;			/* entry->data is now current undo list */
+	  /* Undo all changes to this history entry */
+	  while (rl_undo_list)
+	    rl_do_undo ();
+	  /* And copy the reverted line back to the history entry, preserving
+	     the timestamp. */
+	  FREE (entry->line);
+	  entry->line = savestring (rl_line_buffer);
+	}
+      entry = previous_history ();
+    }
+
+  /* Restore history state */
+  rl_undo_list = saved_undo_list;	/* may have been set to null */
+  history_set_pos (hpos);
+  
+  /* reset the line buffer */
+  rl_replace_line (lbuf, 0);
+  _rl_set_the_line ();
+
+  /* and clean up */
+  xfree (lbuf);
+}  
+
+/* Revert all lines in the history by making sure we are at the end of the
+   history before calling _rl_revert_previous_lines() */
+void
+_rl_revert_all_lines (void)
+{
+  int pos;
+
+  pos = where_history ();
+  using_history ();
+  _rl_revert_previous_lines ();
+  history_set_pos (pos);
+}
+
+/* Free the history list, including private readline data and take care
+   of pointer aliases to history data.  Resets rl_undo_list if it points
+   to an UNDO_LIST * saved as some history entry's data member.  This
+   should not be called while editing is active. */
+void
+rl_clear_history (void)
+{
+  HIST_ENTRY **hlist, *hent;
+  register int i;
+  UNDO_LIST *ul, *saved_undo_list;
+
+  saved_undo_list = rl_undo_list;
+  hlist = history_list ();		/* direct pointer, not copy */
+
+  for (i = 0; i < history_length; i++)
+    {
+      hent = hlist[i];
+      if (ul = (UNDO_LIST *)hent->data)
+	{
+	  if (ul == saved_undo_list)
+	    saved_undo_list = 0;
+	  _rl_free_undo_list (ul);
+	  hent->data = 0;
+	}
+      _rl_free_history_entry (hent);
+    }
+
+  history_offset = history_length = 0;
+  rl_undo_list = saved_undo_list;	/* should be NULL */
+}
+
+/* **************************************************************** */
+/*								    */
+/*			History Commands			    */
+/*								    */
+/* **************************************************************** */
+
+/* Meta-< goes to the start of the history. */
+int
+rl_beginning_of_history (int count, int key)
+{
+  return (rl_get_previous_history (1 + where_history (), key));
+}
+
+/* Meta-> goes to the end of the history.  (The current line). */
+int
+rl_end_of_history (int count, int key)
+{
+  rl_maybe_replace_line ();
+  using_history ();
+  rl_maybe_unsave_line ();
+  return 0;
+}
+
+/* Move down to the next history line. */
+int
+rl_get_next_history (int count, int key)
+{
+  HIST_ENTRY *temp;
+
+  if (count < 0)
+    return (rl_get_previous_history (-count, key));
+
+  if (count == 0)
+    return 0;
+
+  rl_maybe_replace_line ();
+
+  /* either not saved by rl_newline or at end of line, so set appropriately. */
+  if (_rl_history_saved_point == -1 && (rl_point || rl_end))
+    _rl_history_saved_point = (rl_point == rl_end) ? -1 : rl_point;
+
+  temp = (HIST_ENTRY *)NULL;
+  while (count)
+    {
+      temp = next_history ();
+      if (!temp)
+	break;
+      --count;
+    }
+
+  if (temp == 0)
+    rl_maybe_unsave_line ();
+  else
+    {
+      rl_replace_from_history (temp, 0);
+      _rl_history_set_point ();
+    }
+  return 0;
+}
+
+/* Get the previous item out of our interactive history, making it the current
+   line.  If there is no previous history, just ding. */
+int
+rl_get_previous_history (int count, int key)
+{
+  HIST_ENTRY *old_temp, *temp;
+  int had_saved_line;
+
+  if (count < 0)
+    return (rl_get_next_history (-count, key));
+
+  if (count == 0 || history_list () == 0)
+    return 0;
+
+  /* either not saved by rl_newline or at end of line, so set appropriately. */
+  if (_rl_history_saved_point == -1 && (rl_point || rl_end))
+    _rl_history_saved_point = (rl_point == rl_end) ? -1 : rl_point;
+
+  /* If we don't have a line saved, then save this one. */
+  had_saved_line = _rl_saved_line_for_history != 0;
+  rl_maybe_save_line ();
+
+  /* If the current line has changed, save the changes. */
+  rl_maybe_replace_line ();
+
+  temp = old_temp = (HIST_ENTRY *)NULL;
+  while (count)
+    {
+      temp = previous_history ();
+      if (temp == 0)
+	break;
+
+      old_temp = temp;
+      --count;
+    }
+
+  /* If there was a large argument, and we moved back to the start of the
+     history, that is not an error.  So use the last value found. */
+  if (!temp && old_temp)
+    temp = old_temp;
+
+  if (temp == 0)
+    {
+      if (had_saved_line == 0)
+        _rl_free_saved_history_line ();
+      rl_ding ();
+    }
+  else
+    {
+      rl_replace_from_history (temp, 0);
+      _rl_history_set_point ();
+    }
+
+  return 0;
+}
+
+/* The equivalent of the Korn shell C-o operate-and-get-next-history-line
+   editing command. */
+
+/* This could stand to be global to the readline library */
+static rl_hook_func_t *_rl_saved_internal_startup_hook = 0;
+static int saved_history_logical_offset = -1;
+
+#define HISTORY_FULL() (history_is_stifled () && history_length >= history_max_entries)
+
+static int
+set_saved_history ()
+{
+  int absolute_offset, count;
+
+  if (saved_history_logical_offset >= 0)
+    {
+      absolute_offset = saved_history_logical_offset - history_base;
+      count = where_history () - absolute_offset;
+      rl_get_previous_history (count, 0);
+    }
+  saved_history_logical_offset = -1;
+  _rl_internal_startup_hook = _rl_saved_internal_startup_hook;
+
+  return (0);
+}
+
+int
+rl_operate_and_get_next (count, c)
+     int count, c;
+{
+  /* Accept the current line. */
+  rl_newline (1, c);
+
+  saved_history_logical_offset = rl_explicit_arg ? count : where_history () + history_base + 1;
+
+
+  _rl_saved_internal_startup_hook = _rl_internal_startup_hook;
+  _rl_internal_startup_hook = set_saved_history;
+
+  return 0;
+}
+
+/* **************************************************************** */
+/*								    */
+/*			    Editing Modes			    */
+/*								    */
+/* **************************************************************** */
+/* How to toggle back and forth between editing modes. */
+int
+rl_vi_editing_mode (int count, int key)
+{
+#if defined (VI_MODE)
+  _rl_set_insert_mode (RL_IM_INSERT, 1);	/* vi mode ignores insert mode */
+  rl_editing_mode = vi_mode;
+  rl_vi_insert_mode (1, key);
+#endif /* VI_MODE */
+
+  return 0;
+}
+
+int
+rl_emacs_editing_mode (int count, int key)
+{
+  rl_editing_mode = emacs_mode;
+  _rl_set_insert_mode (RL_IM_INSERT, 1); /* emacs mode default is insert mode */
+  _rl_keymap = emacs_standard_keymap;
+
+  if (_rl_show_mode_in_prompt)
+    _rl_reset_prompt ();
+
+  return 0;
+}
+
+/* Function for the rest of the library to use to set insert/overwrite mode. */
+void
+_rl_set_insert_mode (int im, int force)
+{
+#ifdef CURSOR_MODE
+  _rl_set_cursor (im, force);
+#endif
+
+  rl_insert_mode = im;
+}
+
+/* Toggle overwrite mode.  A positive explicit argument selects overwrite
+   mode.  A negative or zero explicit argument selects insert mode. */
+int
+rl_overwrite_mode (int count, int key)
+{
+  if (rl_explicit_arg == 0)
+    _rl_set_insert_mode (rl_insert_mode ^ 1, 0);
+  else if (count > 0)
+    _rl_set_insert_mode (RL_IM_OVERWRITE, 0);
+  else
+    _rl_set_insert_mode (RL_IM_INSERT, 0);
+
+  return 0;
+}
diff --git a/lib/readline/nls.c b/lib/readline/nls.c
new file mode 100644
index 0000000..d2f67e0
--- /dev/null
+++ b/lib/readline/nls.c
@@ -0,0 +1,290 @@
+/* nls.c -- skeletal internationalization code. */
+
+/* Copyright (C) 1996-2017 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <sys/types.h>
+
+#include <stdio.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif /* HAVE_UNISTD_H */
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#if defined (HAVE_LOCALE_H)
+#  include <locale.h>
+#endif
+
+#if defined (HAVE_LANGINFO_CODESET)
+#  include <langinfo.h>
+#endif
+
+#include <ctype.h>
+
+#include "rldefs.h"
+#include "readline.h"
+#include "rlshell.h"
+#include "rlprivate.h"
+
+static int utf8locale PARAMS((char *));
+
+#if !defined (HAVE_SETLOCALE)    
+/* A list of legal values for the LANG or LC_CTYPE environment variables.
+   If a locale name in this list is the value for the LC_ALL, LC_CTYPE,
+   or LANG environment variable (using the first of those with a value),
+   readline eight-bit mode is enabled. */
+static char *legal_lang_values[] =
+{
+ "iso88591",
+ "iso88592",
+ "iso88593",
+ "iso88594",
+ "iso88595",
+ "iso88596",
+ "iso88597",
+ "iso88598",
+ "iso88599",
+ "iso885910",
+ "koi8r",
+ "utf8",
+  0
+};
+
+static char *normalize_codeset PARAMS((char *));
+#endif /* !HAVE_SETLOCALE */
+
+static char *find_codeset PARAMS((char *, size_t *));
+
+static char *_rl_get_locale_var PARAMS((const char *));
+
+static char *
+_rl_get_locale_var (const char *v)
+{
+  char *lspec;
+
+  lspec = sh_get_env_value ("LC_ALL");
+  if (lspec == 0 || *lspec == 0)
+    lspec = sh_get_env_value (v);
+  if (lspec == 0 || *lspec == 0)
+    lspec = sh_get_env_value ("LANG");
+
+  return lspec;
+}
+
+static int
+utf8locale (char *lspec)
+{
+  char *cp;
+  size_t len;
+
+#if HAVE_LANGINFO_CODESET
+  cp = nl_langinfo (CODESET);
+  return (STREQ (cp, "UTF-8") || STREQ (cp, "utf8"));
+#else
+  cp = find_codeset (lspec, &len);
+
+  if (cp == 0 || len < 4 || len > 5)
+    return 0;
+  return ((len == 5) ? strncmp (cp, "UTF-8", len) == 0 : strncmp (cp, "utf8", 4) == 0);
+#endif
+}
+
+/* Query the right environment variables and call setlocale() to initialize
+   the C library locale settings. */
+char *
+_rl_init_locale (void)
+{
+  char *ret, *lspec;
+
+  /* Set the LC_CTYPE locale category from environment variables. */
+  lspec = _rl_get_locale_var ("LC_CTYPE");
+  /* Since _rl_get_locale_var queries the right environment variables,
+     we query the current locale settings with setlocale(), and, if
+     that doesn't return anything, we set lspec to the empty string to
+     force the subsequent call to setlocale() to define the `native'
+     environment. */
+  if (lspec == 0 || *lspec == 0)
+    lspec = setlocale (LC_CTYPE, (char *)NULL);
+  if (lspec == 0)
+    lspec = "";
+  ret = setlocale (LC_CTYPE, lspec);	/* ok, since it does not change locale */
+
+  _rl_utf8locale = (ret && *ret) ? utf8locale (ret) : 0;
+
+  return ret;
+}
+
+/* Check for LC_ALL, LC_CTYPE, and LANG and use the first with a value
+   to decide the defaults for 8-bit character input and output.  Returns
+   1 if we set eight-bit mode. */
+int
+_rl_init_eightbit (void)
+{
+/* If we have setlocale(3), just check the current LC_CTYPE category
+   value, and go into eight-bit mode if it's not C or POSIX. */
+#if defined (HAVE_SETLOCALE)
+  char *lspec, *t;
+
+  t = _rl_init_locale ();	/* returns static pointer */
+
+  if (t && *t && (t[0] != 'C' || t[1]) && (STREQ (t, "POSIX") == 0))
+    {
+      _rl_meta_flag = 1;
+      _rl_convert_meta_chars_to_ascii = 0;
+      _rl_output_meta_chars = 1;
+      return (1);
+    }
+  else
+    return (0);
+
+#else /* !HAVE_SETLOCALE */
+  char *lspec, *t;
+  int i;
+
+  /* We don't have setlocale.  Finesse it.  Check the environment for the
+     appropriate variables and set eight-bit mode if they have the right
+     values. */
+  lspec = _rl_get_locale_var ("LC_CTYPE");
+
+  if (lspec == 0 || (t = normalize_codeset (lspec)) == 0)
+    return (0);
+  for (i = 0; t && legal_lang_values[i]; i++)
+    if (STREQ (t, legal_lang_values[i]))
+      {
+	_rl_meta_flag = 1;
+	_rl_convert_meta_chars_to_ascii = 0;
+	_rl_output_meta_chars = 1;
+	break;
+      }
+
+  _rl_utf8locale = *t ? STREQ (t, "utf8") : 0;
+
+  xfree (t);
+  return (legal_lang_values[i] ? 1 : 0);
+#endif /* !HAVE_SETLOCALE */
+}
+
+#if !defined (HAVE_SETLOCALE)
+static char *
+normalize_codeset (char *codeset)
+{
+  size_t namelen, i;
+  int len, all_digits;
+  char *wp, *retval;
+
+  codeset = find_codeset (codeset, &namelen);
+
+  if (codeset == 0)
+    return (codeset);
+
+  all_digits = 1;
+  for (len = 0, i = 0; i < namelen; i++)
+    {
+      if (ISALNUM ((unsigned char)codeset[i]))
+	{
+	  len++;
+	  all_digits &= _rl_digit_p (codeset[i]);
+	}
+    }
+
+  retval = (char *)malloc ((all_digits ? 3 : 0) + len + 1);
+  if (retval == 0)
+    return ((char *)0);
+
+  wp = retval;
+  /* Add `iso' to beginning of an all-digit codeset */
+  if (all_digits)
+    {
+      *wp++ = 'i';
+      *wp++ = 's';
+      *wp++ = 'o';
+    }
+
+  for (i = 0; i < namelen; i++)
+    if (ISALPHA ((unsigned char)codeset[i]))
+      *wp++ = _rl_to_lower (codeset[i]);
+    else if (_rl_digit_p (codeset[i]))
+      *wp++ = codeset[i];
+  *wp = '\0';
+
+  return retval;
+}
+#endif /* !HAVE_SETLOCALE */
+
+/* Isolate codeset portion of locale specification. */
+static char *
+find_codeset (char *name, size_t *lenp)
+{
+  char *cp, *language, *result;
+
+  cp = language = name;
+  result = (char *)0;
+
+  while (*cp && *cp != '_' && *cp != '@' && *cp != '+' && *cp != ',')
+    cp++;
+
+  /* This does not make sense: language has to be specified.  As
+     an exception we allow the variable to contain only the codeset
+     name.  Perhaps there are funny codeset names.  */
+  if (language == cp) 
+    {
+      *lenp = strlen (language);
+      result = language;
+    }
+  else
+    {
+      /* Next is the territory. */
+      if (*cp == '_')
+	do
+	  ++cp;
+	while (*cp && *cp != '.' && *cp != '@' && *cp != '+' && *cp != ',' && *cp != '_');
+
+      /* Now, finally, is the codeset. */
+      result = cp;
+      if (*cp == '.')
+	do
+	  ++cp;
+	while (*cp && *cp != '@');
+
+      if (cp - result > 2)
+	{
+	  result++;
+	  *lenp = cp - result;
+	}
+      else
+	{
+	  *lenp = strlen (language);
+	  result = language;
+	}
+    }
+
+  return result;
+}
diff --git a/lib/readline/parens.c b/lib/readline/parens.c
new file mode 100644
index 0000000..af47977
--- /dev/null
+++ b/lib/readline/parens.c
@@ -0,0 +1,180 @@
+/* parens.c -- implementation of matching parentheses feature. */
+
+/* Copyright (C) 1987, 1989, 1992-2015, 2017 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#if defined (__TANDEM)
+#  include <floss.h>
+#endif
+
+#include "rlconf.h"
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <stdio.h>
+#include <sys/types.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "posixselect.h"
+
+#if defined (HAVE_STRING_H)
+#  include <string.h>
+#else /* !HAVE_STRING_H */
+#  include <strings.h>
+#endif /* !HAVE_STRING_H */
+
+#if !defined (strchr) && !defined (__STDC__)
+extern char *strchr (), *strrchr ();
+#endif /* !strchr && !__STDC__ */
+
+#include "readline.h"
+#include "rlprivate.h"
+
+static int find_matching_open PARAMS((char *, int, int));
+
+/* Non-zero means try to blink the matching open parenthesis when the
+   close parenthesis is inserted. */
+int rl_blink_matching_paren = 0;
+
+static int _paren_blink_usec = 500000;
+
+/* Change emacs_standard_keymap to have bindings for paren matching when
+   ON_OR_OFF is 1, change them back to self_insert when ON_OR_OFF == 0. */
+void
+_rl_enable_paren_matching (int on_or_off)
+{
+  if (on_or_off)
+    {
+      /* ([{ */
+      rl_bind_key_in_map (')', rl_insert_close, emacs_standard_keymap);
+      rl_bind_key_in_map (']', rl_insert_close, emacs_standard_keymap);
+      rl_bind_key_in_map ('}', rl_insert_close, emacs_standard_keymap);
+
+#if defined (VI_MODE)
+      /* ([{ */
+      rl_bind_key_in_map (')', rl_insert_close, vi_insertion_keymap);
+      rl_bind_key_in_map (']', rl_insert_close, vi_insertion_keymap);
+      rl_bind_key_in_map ('}', rl_insert_close, vi_insertion_keymap);
+#endif
+    }
+  else
+    {
+      /* ([{ */
+      rl_bind_key_in_map (')', rl_insert, emacs_standard_keymap);
+      rl_bind_key_in_map (']', rl_insert, emacs_standard_keymap);
+      rl_bind_key_in_map ('}', rl_insert, emacs_standard_keymap);
+
+#if defined (VI_MODE)
+      /* ([{ */
+      rl_bind_key_in_map (')', rl_insert, vi_insertion_keymap);
+      rl_bind_key_in_map (']', rl_insert, vi_insertion_keymap);
+      rl_bind_key_in_map ('}', rl_insert, vi_insertion_keymap);
+#endif
+    }
+}
+
+int
+rl_set_paren_blink_timeout (int u)
+{
+  int o;
+
+  o = _paren_blink_usec;
+  if (u > 0)
+    _paren_blink_usec = u;
+  return (o);
+}
+
+int
+rl_insert_close (int count, int invoking_key)
+{
+  if (rl_explicit_arg || !rl_blink_matching_paren)
+    _rl_insert_char (count, invoking_key);
+  else
+    {
+#if defined (HAVE_SELECT)
+      int orig_point, match_point, ready;
+      struct timeval timer;
+      fd_set readfds;
+
+      _rl_insert_char (1, invoking_key);
+      (*rl_redisplay_function) ();
+      match_point =
+	find_matching_open (rl_line_buffer, rl_point - 2, invoking_key);
+
+      /* Emacs might message or ring the bell here, but I don't. */
+      if (match_point < 0)
+	return 1;
+
+      FD_ZERO (&readfds);
+      FD_SET (fileno (rl_instream), &readfds);
+      USEC_TO_TIMEVAL (_paren_blink_usec, timer);
+
+      orig_point = rl_point;
+      rl_point = match_point;
+      (*rl_redisplay_function) ();
+      ready = select (1, &readfds, (fd_set *)NULL, (fd_set *)NULL, &timer);
+      rl_point = orig_point;
+#else /* !HAVE_SELECT */
+      _rl_insert_char (count, invoking_key);
+#endif /* !HAVE_SELECT */
+    }
+  return 0;
+}
+
+static int
+find_matching_open (char *string, int from, int closer)
+{
+  register int i;
+  int opener, level, delimiter;
+
+  switch (closer)
+    {
+    case ']': opener = '['; break;
+    case '}': opener = '{'; break;
+    case ')': opener = '('; break;
+    default:
+      return (-1);
+    }
+
+  level = 1;			/* The closer passed in counts as 1. */
+  delimiter = 0;		/* Delimited state unknown. */
+
+  for (i = from; i > -1; i--)
+    {
+      if (delimiter && (string[i] == delimiter))
+	delimiter = 0;
+      else if (rl_basic_quote_characters && strchr (rl_basic_quote_characters, string[i]))
+	delimiter = string[i];
+      else if (!delimiter && (string[i] == closer))
+	level++;
+      else if (!delimiter && (string[i] == opener))
+	level--;
+
+      if (!level)
+	break;
+    }
+  return (i);
+}
diff --git a/lib/readline/parse-colors.c b/lib/readline/parse-colors.c
new file mode 100644
index 0000000..05ec9bc
--- /dev/null
+++ b/lib/readline/parse-colors.c
@@ -0,0 +1,440 @@
+/* `dir', `vdir' and `ls' directory listing programs for GNU.
+
+   Modified by Chet Ramey for Readline.
+
+   Copyright (C) 1985, 1988, 1990-1991, 1995-2010, 2012, 2017
+   Free Software Foundation, Inc.
+
+   This program is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+/* Written by Richard Stallman and David MacKenzie.  */
+
+/* Color support by Peter Anvin <Peter.Anvin@linux.org> and Dennis
+   Flaherty <dennisf@denix.elk.miles.com> based on original patches by
+   Greg Lee <lee@uhunix.uhcc.hawaii.edu>.  */
+
+#define READLINE_LIBRARY
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <stdio.h>
+
+// strdup() / strcpy()
+#if defined (HAVE_STRING_H)
+#  include <string.h>
+#else /* !HAVE_STRING_H */
+#  include <strings.h>
+#endif /* !HAVE_STRING_H */
+
+// abort()
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#include "rldefs.h"	// STREQ, savestring
+#include "readline.h"
+#include "rlprivate.h"
+#include "rlshell.h"
+#include "xmalloc.h"
+
+#include "colors.h"
+#include "parse-colors.h"
+
+#if defined (COLOR_SUPPORT)
+
+static bool get_funky_string (char **dest, const char **src, bool equals_end, size_t *output_count);
+
+struct bin_str _rl_color_indicator[] =
+  {
+    { LEN_STR_PAIR ("\033[") },         //  lc: Left of color sequence
+    { LEN_STR_PAIR ("m") },             //  rc: Right of color sequence
+    { 0, NULL },                        //  ec: End color (replaces lc+no+rc)
+    { LEN_STR_PAIR ("0") },             //  rs: Reset to ordinary colors
+    { 0, NULL },                        //  no: Normal
+    { 0, NULL },                        //  fi: File: default
+    { LEN_STR_PAIR ("01;34") },         //  di: Directory: bright blue
+    { LEN_STR_PAIR ("01;36") },         //  ln: Symlink: bright cyan
+    { LEN_STR_PAIR ("33") },            //  pi: Pipe: yellow/brown
+    { LEN_STR_PAIR ("01;35") },         //  so: Socket: bright magenta
+    { LEN_STR_PAIR ("01;33") },         //  bd: Block device: bright yellow
+    { LEN_STR_PAIR ("01;33") },         //  cd: Char device: bright yellow
+    { 0, NULL },                        //  mi: Missing file: undefined
+    { 0, NULL },                        //  or: Orphaned symlink: undefined
+    { LEN_STR_PAIR ("01;32") },         //  ex: Executable: bright green
+    { LEN_STR_PAIR ("01;35") },         //  do: Door: bright magenta
+    { LEN_STR_PAIR ("37;41") },         //  su: setuid: white on red
+    { LEN_STR_PAIR ("30;43") },         //  sg: setgid: black on yellow
+    { LEN_STR_PAIR ("37;44") },         //  st: sticky: black on blue
+    { LEN_STR_PAIR ("34;42") },         //  ow: other-writable: blue on green
+    { LEN_STR_PAIR ("30;42") },         //  tw: ow w/ sticky: black on green
+    { LEN_STR_PAIR ("30;41") },         //  ca: black on red
+    { 0, NULL },                        //  mh: disabled by default
+    { LEN_STR_PAIR ("\033[K") },        //  cl: clear to end of line
+  };
+
+/* Parse a string as part of the LS_COLORS variable; this may involve
+   decoding all kinds of escape characters.  If equals_end is set an
+   unescaped equal sign ends the string, otherwise only a : or \0
+   does.  Set *OUTPUT_COUNT to the number of bytes output.  Return
+   true if successful.
+
+   The resulting string is *not* null-terminated, but may contain
+   embedded nulls.
+
+   Note that both dest and src are char **; on return they point to
+   the first free byte after the array and the character that ended
+   the input string, respectively.  */
+
+static bool
+get_funky_string (char **dest, const char **src, bool equals_end, size_t *output_count) {
+  char num;			/* For numerical codes */
+  size_t count;			/* Something to count with */
+  enum {
+    ST_GND, ST_BACKSLASH, ST_OCTAL, ST_HEX, ST_CARET, ST_END, ST_ERROR
+  } state;
+  const char *p;
+  char *q;
+
+  p = *src;			/* We don't want to double-indirect */
+  q = *dest;			/* the whole darn time.  */
+
+  count = 0;			/* No characters counted in yet.  */
+  num = 0;
+
+  state = ST_GND;		/* Start in ground state.  */
+  while (state < ST_END)
+    {
+      switch (state)
+        {
+        case ST_GND:		/* Ground state (no escapes) */
+          switch (*p)
+            {
+            case ':':
+            case '\0':
+              state = ST_END;	/* End of string */
+              break;
+            case '\\':
+              state = ST_BACKSLASH; /* Backslash scape sequence */
+              ++p;
+              break;
+            case '^':
+              state = ST_CARET; /* Caret escape */
+              ++p;
+              break;
+            case '=':
+              if (equals_end)
+                {
+                  state = ST_END; /* End */
+                  break;
+                }
+              /* else fall through */
+            default:
+              *(q++) = *(p++);
+              ++count;
+              break;
+            }
+          break;
+
+        case ST_BACKSLASH:	/* Backslash escaped character */
+          switch (*p)
+            {
+            case '0':
+            case '1':
+            case '2':
+            case '3':
+            case '4':
+            case '5':
+            case '6':
+            case '7':
+              state = ST_OCTAL;	/* Octal sequence */
+              num = *p - '0';
+              break;
+            case 'x':
+            case 'X':
+              state = ST_HEX;	/* Hex sequence */
+              num = 0;
+              break;
+            case 'a':		/* Bell */
+              num = '\a';
+              break;
+            case 'b':		/* Backspace */
+              num = '\b';
+              break;
+            case 'e':		/* Escape */
+              num = 27;
+              break;
+            case 'f':		/* Form feed */
+              num = '\f';
+              break;
+            case 'n':		/* Newline */
+              num = '\n';
+              break;
+            case 'r':		/* Carriage return */
+              num = '\r';
+              break;
+            case 't':		/* Tab */
+              num = '\t';
+              break;
+            case 'v':		/* Vtab */
+              num = '\v';
+              break;
+            case '?':		/* Delete */
+              num = 127;
+              break;
+            case '_':		/* Space */
+              num = ' ';
+              break;
+            case '\0':		/* End of string */
+              state = ST_ERROR;	/* Error! */
+              break;
+            default:		/* Escaped character like \ ^ : = */
+              num = *p;
+              break;
+            }
+          if (state == ST_BACKSLASH)
+            {
+              *(q++) = num;
+              ++count;
+              state = ST_GND;
+            }
+          ++p;
+          break;
+
+        case ST_OCTAL:		/* Octal sequence */
+          if (*p < '0' || *p > '7')
+            {
+              *(q++) = num;
+              ++count;
+              state = ST_GND;
+            }
+          else
+            num = (num << 3) + (*(p++) - '0');
+          break;
+
+        case ST_HEX:		/* Hex sequence */
+          switch (*p)
+            {
+            case '0':
+            case '1':
+            case '2':
+            case '3':
+            case '4':
+            case '5':
+            case '6':
+            case '7':
+            case '8':
+            case '9':
+              num = (num << 4) + (*(p++) - '0');
+              break;
+            case 'a':
+            case 'b':
+            case 'c':
+            case 'd':
+            case 'e':
+            case 'f':
+              num = (num << 4) + (*(p++) - 'a') + 10;
+              break;
+            case 'A':
+            case 'B':
+            case 'C':
+            case 'D':
+            case 'E':
+            case 'F':
+              num = (num << 4) + (*(p++) - 'A') + 10;
+              break;
+            default:
+              *(q++) = num;
+              ++count;
+              state = ST_GND;
+              break;
+            }
+          break;
+
+        case ST_CARET:		/* Caret escape */
+          state = ST_GND;	/* Should be the next state... */
+          if (*p >= '@' && *p <= '~')
+            {
+              *(q++) = *(p++) & 037;
+              ++count;
+            }
+          else if (*p == '?')
+            {
+              *(q++) = 127;
+              ++count;
+            }
+          else
+            state = ST_ERROR;
+          break;
+
+        default:
+	  /* should we ? */
+          /* abort ();	no, we should not */
+          state = ST_ERROR;
+          break;
+        }
+    }
+
+  *dest = q;
+  *src = p;
+  *output_count = count;
+
+  return state != ST_ERROR;
+}
+#endif /* COLOR_SUPPORT */
+
+void _rl_parse_colors(void)
+{
+#if defined (COLOR_SUPPORT)
+  const char *p;		/* Pointer to character being parsed */
+  char *buf;			/* color_buf buffer pointer */
+  int state;			/* State of parser */
+  int ind_no;			/* Indicator number */
+  char label[3];		/* Indicator label */
+  COLOR_EXT_TYPE *ext;		/* Extension we are working on */
+
+  p = sh_get_env_value ("LS_COLORS");
+  if (p == 0 || *p == '\0')
+    {
+      _rl_color_ext_list = NULL;
+      return;
+    }
+
+  ext = NULL;
+  strcpy (label, "??");
+
+  /* This is an overly conservative estimate, but any possible
+     LS_COLORS string will *not* generate a color_buf longer than
+     itself, so it is a safe way of allocating a buffer in
+     advance.  */
+  buf = color_buf = savestring (p);
+
+  state = 1;
+  while (state > 0)
+    {
+      switch (state)
+        {
+        case 1:		/* First label character */
+          switch (*p)
+            {
+            case ':':
+              ++p;
+              break;
+
+            case '*':
+              /* Allocate new extension block and add to head of
+                 linked list (this way a later definition will
+                 override an earlier one, which can be useful for
+                 having terminal-specific defs override global).  */
+
+              ext = (COLOR_EXT_TYPE *)xmalloc (sizeof *ext);
+              ext->next = _rl_color_ext_list;
+              _rl_color_ext_list = ext;
+
+              ++p;
+              ext->ext.string = buf;
+
+              state = (get_funky_string (&buf, &p, true, &ext->ext.len)
+                       ? 4 : -1);
+              break;
+
+            case '\0':
+              state = 0;	/* Done! */
+              break;
+
+            default:	/* Assume it is file type label */
+              label[0] = *(p++);
+              state = 2;
+              break;
+            }
+          break;
+
+        case 2:		/* Second label character */
+          if (*p)
+            {
+              label[1] = *(p++);
+              state = 3;
+            }
+          else
+            state = -1;	/* Error */
+          break;
+
+        case 3:		/* Equal sign after indicator label */
+          state = -1;	/* Assume failure...  */
+          if (*(p++) == '=')/* It *should* be...  */
+            {
+              for (ind_no = 0; indicator_name[ind_no] != NULL; ++ind_no)
+                {
+                  if (STREQ (label, indicator_name[ind_no]))
+                    {
+                      _rl_color_indicator[ind_no].string = buf;
+                      state = (get_funky_string (&buf, &p, false,
+                                                 &_rl_color_indicator[ind_no].len)
+                               ? 1 : -1);
+                      break;
+                    }
+                }
+              if (state == -1)
+		{
+                  _rl_errmsg ("LS_COLORS: unrecognized prefix: %s", label);
+                  /* recover from an unrecognized prefix */
+                  while (p && *p && *p != ':')
+		    p++;
+		  if (p && *p == ':')
+		    state = 1;
+		  else if (p && *p == 0)
+		    state = 0;
+		}
+            }
+          break;
+
+        case 4:		/* Equal sign after *.ext */
+          if (*(p++) == '=')
+            {
+              ext->seq.string = buf;
+              state = (get_funky_string (&buf, &p, false, &ext->seq.len)
+                       ? 1 : -1);
+            }
+          else
+            state = -1;
+          /* XXX - recover here as with an unrecognized prefix? */
+          if (state == -1 && ext->ext.string)
+	    _rl_errmsg ("LS_COLORS: syntax error: %s", ext->ext.string);
+          break;
+        }
+    }
+
+  if (state < 0)
+    {
+      COLOR_EXT_TYPE *e;
+      COLOR_EXT_TYPE *e2;
+
+      _rl_errmsg ("unparsable value for LS_COLORS environment variable");
+      free (color_buf);
+      for (e = _rl_color_ext_list; e != NULL; /* empty */)
+        {
+          e2 = e;
+          e = e->next;
+          free (e2);
+        }
+      _rl_color_ext_list = NULL;
+      _rl_colored_stats = 0;	/* can't have colored stats without colors */
+    }
+#else /* !COLOR_SUPPORT */
+  ;
+#endif /* !COLOR_SUPPORT */
+}
diff --git a/lib/readline/parse-colors.h b/lib/readline/parse-colors.h
new file mode 100644
index 0000000..aef86f7
--- /dev/null
+++ b/lib/readline/parse-colors.h
@@ -0,0 +1,46 @@
+/* `dir', `vdir' and `ls' directory listing programs for GNU.
+
+   Modified by Chet Ramey for Readline.
+
+   Copyright (C) 1985, 1988, 1990-1991, 1995-2010, 2012 Free Software Foundation,
+   Inc.
+
+   This program is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+/* Written by Richard Stallman and David MacKenzie.  */
+
+/* Color support by Peter Anvin <Peter.Anvin@linux.org> and Dennis
+   Flaherty <dennisf@denix.elk.miles.com> based on original patches by
+   Greg Lee <lee@uhunix.uhcc.hawaii.edu>.  */
+
+#ifndef _PARSE_COLORS_H_
+#define _PARSE_COLORS_H_
+
+#include "readline.h"
+
+#define LEN_STR_PAIR(s) sizeof (s) - 1, s
+
+void _rl_parse_colors (void);
+
+static const char *const indicator_name[]=
+  {
+    "lc", "rc", "ec", "rs", "no", "fi", "di", "ln", "pi", "so",
+    "bd", "cd", "mi", "or", "ex", "do", "su", "sg", "st",
+    "ow", "tw", "ca", "mh", "cl", NULL
+  };
+
+/* Buffer for color sequences */
+static char *color_buf;
+
+#endif /* !_PARSE_COLORS_H_ */
diff --git a/lib/readline/posixdir.h b/lib/readline/posixdir.h
new file mode 100644
index 0000000..af5be80
--- /dev/null
+++ b/lib/readline/posixdir.h
@@ -0,0 +1,71 @@
+/* posixdir.h -- Posix directory reading includes and defines. */
+
+/* Copyright (C) 1987,1991,2012 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* This file should be included instead of <dirent.h> or <sys/dir.h>. */
+
+#if !defined (_POSIXDIR_H_)
+#define _POSIXDIR_H_
+
+#if defined (HAVE_DIRENT_H)
+#  include <dirent.h>
+#  if defined (HAVE_STRUCT_DIRENT_D_NAMLEN)
+#    define D_NAMLEN(d)	((d)->d_namlen)
+#  else
+#    define D_NAMLEN(d)   (strlen ((d)->d_name))
+#  endif /* !HAVE_STRUCT_DIRENT_D_NAMLEN */
+#else
+#  if defined (HAVE_SYS_NDIR_H)
+#    include <sys/ndir.h>
+#  endif
+#  if defined (HAVE_SYS_DIR_H)
+#    include <sys/dir.h>
+#  endif
+#  if defined (HAVE_NDIR_H)
+#    include <ndir.h>
+#  endif
+#  if !defined (dirent)
+#    define dirent direct
+#  endif /* !dirent */
+#  define D_NAMLEN(d)   ((d)->d_namlen)
+#endif /* !HAVE_DIRENT_H */
+
+/* The bash code fairly consistently uses d_fileno; make sure it's available */
+#if defined (HAVE_STRUCT_DIRENT_D_INO) && !defined (HAVE_STRUCT_DIRENT_D_FILENO)
+#  define d_fileno d_ino
+#endif
+
+/* Posix does not require that the d_ino field be present, and some
+   systems do not provide it. */
+#if !defined (HAVE_STRUCT_DIRENT_D_INO) || defined (BROKEN_DIRENT_D_INO)
+#  define REAL_DIR_ENTRY(dp) 1
+#else
+#  define REAL_DIR_ENTRY(dp) (dp->d_ino != 0)
+#endif /* _POSIX_SOURCE */
+
+#if defined (HAVE_STRUCT_DIRENT_D_INO) && !defined (BROKEN_DIRENT_D_INO)
+#  define D_INO_AVAILABLE
+#endif
+
+/* Signal the rest of the code that it can safely use dirent.d_fileno */
+#if defined (D_INO_AVAILABLE) || defined (HAVE_STRUCT_DIRENT_D_FILENO)
+#  define D_FILENO_AVAILABLE 1
+#endif
+
+#endif /* !_POSIXDIR_H_ */
diff --git a/lib/readline/posixjmp.h b/lib/readline/posixjmp.h
new file mode 100644
index 0000000..9c7e99e
--- /dev/null
+++ b/lib/readline/posixjmp.h
@@ -0,0 +1,46 @@
+/* posixjmp.h -- wrapper for setjmp.h with changes for POSIX systems. */
+
+/* Copyright (C) 1987,1991-2015 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _POSIXJMP_H_
+#define _POSIXJMP_H_
+
+#include <setjmp.h>
+
+/* This *must* be included *after* config.h */
+
+#if defined (HAVE_POSIX_SIGSETJMP)
+#  define procenv_t	sigjmp_buf
+
+#  define setjmp_nosigs(x)	sigsetjmp((x), 0)
+#  define setjmp_sigs(x)	sigsetjmp((x), 1)
+
+#  define _rl_longjmp(x, n)	siglongjmp((x), (n))
+#  define sh_longjmp(x, n)	siglongjmp((x), (n))
+#else
+#  define procenv_t	jmp_buf
+
+#  define setjmp_nosigs		setjmp
+#  define setjmp_sigs		setjmp
+
+#  define _rl_longjmp(x, n)	longjmp((x), (n))
+#  define sh_longjmp(x, n)	longjmp((x), (n))
+#endif
+
+#endif /* _POSIXJMP_H_ */
diff --git a/lib/readline/posixselect.h b/lib/readline/posixselect.h
new file mode 100644
index 0000000..da6a1ac
--- /dev/null
+++ b/lib/readline/posixselect.h
@@ -0,0 +1,47 @@
+/* posixselect.h -- wrapper for select(2) includes and definitions */
+
+/* Copyright (C) 2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _POSIXSELECT_H_
+#define _POSIXSELECT_H_
+
+#if defined (FD_SET) && !defined (HAVE_SELECT)
+#  define HAVE_SELECT 1
+#endif
+
+#if defined (HAVE_SELECT)
+#  if !defined (HAVE_SYS_SELECT_H) || !defined (M_UNIX)
+#    include <sys/time.h>
+#  endif
+#endif /* HAVE_SELECT */
+#if defined (HAVE_SYS_SELECT_H)
+#  include <sys/select.h>
+#endif
+
+#ifndef USEC_PER_SEC
+#  define USEC_PER_SEC 1000000
+#endif
+
+#define USEC_TO_TIMEVAL(us, tv) \
+do { \
+  (tv).tv_sec = (us) / USEC_PER_SEC; \
+  (tv).tv_usec = (us) % USEC_PER_SEC; \
+} while (0)
+
+#endif /* _POSIXSELECT_H_ */
diff --git a/lib/readline/posixstat.h b/lib/readline/posixstat.h
new file mode 100644
index 0000000..b607786
--- /dev/null
+++ b/lib/readline/posixstat.h
@@ -0,0 +1,162 @@
+/* posixstat.h -- Posix stat(2) definitions for systems that
+   don't have them. */
+
+/* Copyright (C) 1987-2019 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* This file should be included instead of <sys/stat.h>.
+   It relies on the local sys/stat.h to work though. */
+#if !defined (_POSIXSTAT_H_)
+#define _POSIXSTAT_H_
+
+#include <sys/stat.h>
+
+#if defined (STAT_MACROS_BROKEN)
+#  undef S_ISBLK
+#  undef S_ISCHR
+#  undef S_ISDIR
+#  undef S_ISFIFO
+#  undef S_ISREG
+#  undef S_ISLNK
+#endif /* STAT_MACROS_BROKEN */
+
+/* These are guaranteed to work only on isc386 */
+#if !defined (S_IFDIR) && !defined (S_ISDIR)
+#  define S_IFDIR 0040000
+#endif /* !S_IFDIR && !S_ISDIR */
+#if !defined (S_IFMT)
+#  define S_IFMT  0170000
+#endif /* !S_IFMT */
+
+/* Posix 1003.1 5.6.1.1 <sys/stat.h> file types */
+
+/* Some Posix-wannabe systems define _S_IF* macros instead of S_IF*, but
+   do not provide the S_IS* macros that Posix requires. */
+
+#if defined (_S_IFMT) && !defined (S_IFMT)
+#define S_IFMT _S_IFMT
+#endif
+#if defined (_S_IFIFO) && !defined (S_IFIFO)
+#define S_IFIFO _S_IFIFO
+#endif
+#if defined (_S_IFCHR) && !defined (S_IFCHR)
+#define S_IFCHR _S_IFCHR
+#endif
+#if defined (_S_IFDIR) && !defined (S_IFDIR)
+#define S_IFDIR _S_IFDIR
+#endif
+#if defined (_S_IFBLK) && !defined (S_IFBLK)
+#define S_IFBLK _S_IFBLK
+#endif
+#if defined (_S_IFREG) && !defined (S_IFREG)
+#define S_IFREG _S_IFREG
+#endif
+#if defined (_S_IFLNK) && !defined (S_IFLNK)
+#define S_IFLNK _S_IFLNK
+#endif
+#if defined (_S_IFSOCK) && !defined (S_IFSOCK)
+#define S_IFSOCK _S_IFSOCK
+#endif
+
+/* Test for each symbol individually and define the ones necessary (some
+   systems claiming Posix compatibility define some but not all). */
+
+#if defined (S_IFBLK) && !defined (S_ISBLK)
+#define	S_ISBLK(m)	(((m)&S_IFMT) == S_IFBLK)	/* block device */
+#endif
+
+#if defined (S_IFCHR) && !defined (S_ISCHR)
+#define	S_ISCHR(m)	(((m)&S_IFMT) == S_IFCHR)	/* character device */
+#endif
+
+#if defined (S_IFDIR) && !defined (S_ISDIR)
+#define	S_ISDIR(m)	(((m)&S_IFMT) == S_IFDIR)	/* directory */
+#endif
+
+#if defined (S_IFREG) && !defined (S_ISREG)
+#define	S_ISREG(m)	(((m)&S_IFMT) == S_IFREG)	/* file */
+#endif
+
+#if defined (S_IFIFO) && !defined (S_ISFIFO)
+#define	S_ISFIFO(m)	(((m)&S_IFMT) == S_IFIFO)	/* fifo - named pipe */
+#endif
+
+#if defined (S_IFLNK) && !defined (S_ISLNK)
+#define	S_ISLNK(m)	(((m)&S_IFMT) == S_IFLNK)	/* symbolic link */
+#endif
+
+#if defined (S_IFSOCK) && !defined (S_ISSOCK)
+#define	S_ISSOCK(m)	(((m)&S_IFMT) == S_IFSOCK)	/* socket */
+#endif
+
+/*
+ * POSIX 1003.1 5.6.1.2 <sys/stat.h> File Modes
+ */
+
+#if !defined (S_IRWXU)
+#  if !defined (S_IREAD)
+#    define S_IREAD	00400
+#    define S_IWRITE	00200
+#    define S_IEXEC	00100
+#  endif /* S_IREAD */
+
+#  if !defined (S_IRUSR)
+#    define S_IRUSR	S_IREAD			/* read, owner */
+#    define S_IWUSR	S_IWRITE		/* write, owner */
+#    define S_IXUSR	S_IEXEC			/* execute, owner */
+
+#    define S_IRGRP	(S_IREAD  >> 3)		/* read, group */
+#    define S_IWGRP	(S_IWRITE >> 3)		/* write, group */
+#    define S_IXGRP	(S_IEXEC  >> 3)		/* execute, group */
+
+#    define S_IROTH	(S_IREAD  >> 6)		/* read, other */
+#    define S_IWOTH	(S_IWRITE >> 6)		/* write, other */
+#    define S_IXOTH	(S_IEXEC  >> 6)		/* execute, other */
+#  endif /* !S_IRUSR */
+
+#  define S_IRWXU	(S_IRUSR | S_IWUSR | S_IXUSR)
+#  define S_IRWXG	(S_IRGRP | S_IWGRP | S_IXGRP)
+#  define S_IRWXO	(S_IROTH | S_IWOTH | S_IXOTH)
+#else /* !S_IRWXU */
+  /* S_IRWXU is defined, but "group" and "other" bits might not be
+     (happens in certain versions of MinGW).  */
+#  if !defined (S_IRGRP)
+#    define S_IRGRP	(S_IREAD  >> 3)		/* read, group */
+#    define S_IWGRP	(S_IWRITE >> 3)		/* write, group */
+#    define S_IXGRP	(S_IEXEC  >> 3)		/* execute, group */
+#  endif /* !S_IRGRP */
+
+#  if !defined (S_IROTH)
+#    define S_IROTH	(S_IREAD  >> 6)		/* read, other */
+#    define S_IWOTH	(S_IWRITE >> 6)		/* write, other */
+#    define S_IXOTH	(S_IEXEC  >> 6)		/* execute, other */
+#  endif /* !S_IROTH */
+#  if !defined (S_IRWXG)
+#    define S_IRWXG	(S_IRGRP | S_IWGRP | S_IXGRP)
+#  endif
+#  if !defined (S_IRWXO)
+#    define S_IRWXO	(S_IROTH | S_IWOTH | S_IXOTH)
+#  endif
+#endif /* !S_IRWXU */
+
+/* These are non-standard, but are used in builtins.c$symbolic_umask() */
+#define S_IRUGO		(S_IRUSR | S_IRGRP | S_IROTH)
+#define S_IWUGO		(S_IWUSR | S_IWGRP | S_IWOTH)
+#define S_IXUGO		(S_IXUSR | S_IXGRP | S_IXOTH)
+
+#endif /* _POSIXSTAT_H_ */
diff --git a/lib/readline/readline.c b/lib/readline/readline.c
new file mode 100644
index 0000000..e61d188
--- /dev/null
+++ b/lib/readline/readline.c
@@ -0,0 +1,1534 @@
+/* readline.c -- a general facility for reading lines of input
+   with emacs style editing and completion. */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <sys/types.h>
+#include "posixstat.h"
+#include <fcntl.h>
+#if defined (HAVE_SYS_FILE_H)
+#  include <sys/file.h>
+#endif /* HAVE_SYS_FILE_H */
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif /* HAVE_UNISTD_H */
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#if defined (HAVE_LOCALE_H)
+#  include <locale.h>
+#endif
+
+#include <stdio.h>
+#include "posixjmp.h"
+#include <errno.h>
+
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+/* System-specific feature definitions and include files. */
+#include "rldefs.h"
+#include "rlmbutil.h"
+
+#if defined (__EMX__)
+#  define INCL_DOSPROCESS
+#  include <os2.h>
+#endif /* __EMX__ */
+
+/* Some standard library routines. */
+#include "readline.h"
+#include "history.h"
+
+#include "rlprivate.h"
+#include "rlshell.h"
+#include "xmalloc.h"
+
+#ifndef RL_LIBRARY_VERSION
+#  define RL_LIBRARY_VERSION "8.0"
+#endif
+
+#ifndef RL_READLINE_VERSION
+#  define RL_READLINE_VERSION	0x0800
+#endif
+
+extern void _rl_free_history_entry PARAMS((HIST_ENTRY *));
+
+#if defined (COLOR_SUPPORT)
+extern void _rl_parse_colors PARAMS((void));		/* XXX */
+#endif
+
+
+/* Forward declarations used in this file. */
+static char *readline_internal PARAMS((void));
+static void readline_initialize_everything PARAMS((void));
+
+static void bind_arrow_keys_internal PARAMS((Keymap));
+static void bind_arrow_keys PARAMS((void));
+
+static void bind_bracketed_paste_prefix PARAMS((void));
+
+static void readline_default_bindings PARAMS((void));
+static void reset_default_bindings PARAMS((void));
+
+static int _rl_subseq_result PARAMS((int, Keymap, int, int));
+static int _rl_subseq_getchar PARAMS((int));
+
+/* **************************************************************** */
+/*								    */
+/*			Line editing input utility		    */
+/*								    */
+/* **************************************************************** */
+
+const char *rl_library_version = RL_LIBRARY_VERSION;
+
+int rl_readline_version = RL_READLINE_VERSION;
+
+/* True if this is `real' readline as opposed to some stub substitute. */
+int rl_gnu_readline_p = 1;
+
+/* A pointer to the keymap that is currently in use.
+   By default, it is the standard emacs keymap. */
+Keymap _rl_keymap = emacs_standard_keymap;
+
+/* The current style of editing. */
+int rl_editing_mode = emacs_mode;
+
+/* The current insert mode:  input (the default) or overwrite */
+int rl_insert_mode = RL_IM_DEFAULT;
+
+/* Non-zero if we called this function from _rl_dispatch().  It's present
+   so functions can find out whether they were called from a key binding
+   or directly from an application. */
+int rl_dispatching;
+
+/* Non-zero if the previous command was a kill command. */
+int _rl_last_command_was_kill = 0;
+
+/* The current value of the numeric argument specified by the user. */
+int rl_numeric_arg = 1;
+
+/* Non-zero if an argument was typed. */
+int rl_explicit_arg = 0;
+
+/* Temporary value used while generating the argument. */
+int rl_arg_sign = 1;
+
+/* Non-zero means we have been called at least once before. */
+static int rl_initialized;
+
+#if 0
+/* If non-zero, this program is running in an EMACS buffer. */
+static int running_in_emacs;
+#endif
+
+/* Flags word encapsulating the current readline state. */
+unsigned long rl_readline_state = RL_STATE_NONE;
+
+/* The current offset in the current input line. */
+int rl_point;
+
+/* Mark in the current input line. */
+int rl_mark;
+
+/* Length of the current input line. */
+int rl_end;
+
+/* Make this non-zero to return the current input_line. */
+int rl_done;
+
+/* The last function executed by readline. */
+rl_command_func_t *rl_last_func = (rl_command_func_t *)NULL;
+
+/* Top level environment for readline_internal (). */
+procenv_t _rl_top_level;
+
+/* The streams we interact with. */
+FILE *_rl_in_stream, *_rl_out_stream;
+
+/* The names of the streams that we do input and output to. */
+FILE *rl_instream = (FILE *)NULL;
+FILE *rl_outstream = (FILE *)NULL;
+
+/* Non-zero means echo characters as they are read.  Defaults to no echo;
+   set to 1 if there is a controlling terminal, we can get its attributes,
+   and the attributes include `echo'.  Look at rltty.c:prepare_terminal_settings
+   for the code that sets it. */
+int _rl_echoing_p = 0;
+
+/* Current prompt. */
+char *rl_prompt = (char *)NULL;
+int rl_visible_prompt_length = 0;
+
+/* Set to non-zero by calling application if it has already printed rl_prompt
+   and does not want readline to do it the first time. */
+int rl_already_prompted = 0;
+
+/* The number of characters read in order to type this complete command. */
+int rl_key_sequence_length = 0;
+
+/* If non-zero, then this is the address of a function to call just
+   before readline_internal_setup () prints the first prompt. */
+rl_hook_func_t *rl_startup_hook = (rl_hook_func_t *)NULL;
+
+/* Any readline function can set this and have it run just before the user's
+   rl_startup_hook. */
+rl_hook_func_t *_rl_internal_startup_hook = (rl_hook_func_t *)NULL;
+
+/* If non-zero, this is the address of a function to call just before
+   readline_internal_setup () returns and readline_internal starts
+   reading input characters. */
+rl_hook_func_t *rl_pre_input_hook = (rl_hook_func_t *)NULL;
+
+/* What we use internally.  You should always refer to RL_LINE_BUFFER. */
+static char *the_line;
+
+/* The character that can generate an EOF.  Really read from
+   the terminal driver... just defaulted here. */
+int _rl_eof_char = CTRL ('D');
+
+/* Non-zero makes this the next keystroke to read. */
+int rl_pending_input = 0;
+
+/* If non-zero when readline_internal returns, it means we found EOF */
+int _rl_eof_found = 0;
+
+/* Pointer to a useful terminal name. */
+const char *rl_terminal_name = (const char *)NULL;
+
+/* Non-zero means to always use horizontal scrolling in line display. */
+int _rl_horizontal_scroll_mode = 0;
+
+/* Non-zero means to display an asterisk at the starts of history lines
+   which have been modified. */
+int _rl_mark_modified_lines = 0;
+
+/* The style of `bell' notification preferred.  This can be set to NO_BELL,
+   AUDIBLE_BELL, or VISIBLE_BELL. */
+int _rl_bell_preference = AUDIBLE_BELL;
+     
+/* String inserted into the line by rl_insert_comment (). */
+char *_rl_comment_begin;
+
+/* Keymap holding the function currently being executed. */
+Keymap rl_executing_keymap;
+
+/* Keymap we're currently using to dispatch. */
+Keymap _rl_dispatching_keymap;
+
+/* Non-zero means to erase entire line, including prompt, on empty input lines. */
+int rl_erase_empty_line = 0;
+
+/* Non-zero means to read only this many characters rather than up to a
+   character bound to accept-line. */
+int rl_num_chars_to_read = 0;
+
+/* Line buffer and maintenance. */
+char *rl_line_buffer = (char *)NULL;
+int rl_line_buffer_len = 0;
+
+/* Key sequence `contexts' */
+_rl_keyseq_cxt *_rl_kscxt = 0;
+
+int rl_executing_key;
+char *rl_executing_keyseq = 0;
+int _rl_executing_keyseq_size = 0;
+
+struct _rl_cmd _rl_pending_command;
+struct _rl_cmd *_rl_command_to_execute = (struct _rl_cmd *)NULL;
+
+/* Timeout (specified in milliseconds) when reading characters making up an
+   ambiguous multiple-key sequence */
+int _rl_keyseq_timeout = 500;
+
+#define RESIZE_KEYSEQ_BUFFER() \
+  do \
+    { \
+      if (rl_key_sequence_length + 2 >= _rl_executing_keyseq_size) \
+	{ \
+	  _rl_executing_keyseq_size += 16; \
+	  rl_executing_keyseq = xrealloc (rl_executing_keyseq, _rl_executing_keyseq_size); \
+	} \
+    } \
+  while (0);
+        
+/* Forward declarations used by the display, termcap, and history code. */
+
+/* **************************************************************** */
+/*								    */
+/*			`Forward' declarations  		    */
+/*								    */
+/* **************************************************************** */
+
+/* Non-zero means do not parse any lines other than comments and
+   parser directives. */
+unsigned char _rl_parsing_conditionalized_out = 0;
+
+/* Non-zero means to convert characters with the meta bit set to
+   escape-prefixed characters so we can indirect through
+   emacs_meta_keymap or vi_escape_keymap. */
+int _rl_convert_meta_chars_to_ascii = 1;
+
+/* Non-zero means to output characters with the meta bit set directly
+   rather than as a meta-prefixed escape sequence. */
+int _rl_output_meta_chars = 0;
+
+/* Non-zero means to look at the termios special characters and bind
+   them to equivalent readline functions at startup. */
+int _rl_bind_stty_chars = 1;
+
+/* Non-zero means to go through the history list at every newline (or
+   whenever rl_done is set and readline returns) and revert each line to
+   its initial state. */
+int _rl_revert_all_at_newline = 0;
+
+/* Non-zero means to honor the termios ECHOCTL bit and echo control
+   characters corresponding to keyboard-generated signals. */
+int _rl_echo_control_chars = 1;
+
+/* Non-zero means to prefix the displayed prompt with a character indicating
+   the editing mode: @ for emacs, : for vi-command, + for vi-insert. */
+int _rl_show_mode_in_prompt = 0;
+
+/* Non-zero means to attempt to put the terminal in `bracketed paste mode',
+   where it will prefix pasted text with an escape sequence and send
+   another to mark the end of the paste. */
+int _rl_enable_bracketed_paste = BRACKETED_PASTE_DEFAULT;
+int _rl_enable_active_region = BRACKETED_PASTE_DEFAULT;
+
+/* **************************************************************** */
+/*								    */
+/*			Top Level Functions			    */
+/*								    */
+/* **************************************************************** */
+
+/* Non-zero means treat 0200 bit in terminal input as Meta bit. */
+int _rl_meta_flag = 0;	/* Forward declaration */
+
+/* Set up the prompt and expand it.  Called from readline() and
+   rl_callback_handler_install (). */
+int
+rl_set_prompt (const char *prompt)
+{
+  FREE (rl_prompt);
+  rl_prompt = prompt ? savestring (prompt) : (char *)NULL;
+  rl_display_prompt = rl_prompt ? rl_prompt : "";
+
+  rl_visible_prompt_length = rl_expand_prompt (rl_prompt);
+  return 0;
+}
+  
+/* Read a line of input.  Prompt with PROMPT.  An empty PROMPT means
+   none.  A return value of NULL means that EOF was encountered. */
+char *
+readline (const char *prompt)
+{
+  char *value;
+#if 0
+  int in_callback;
+#endif
+
+  /* If we are at EOF return a NULL string. */
+  if (rl_pending_input == EOF)
+    {
+      rl_clear_pending_input ();
+      return ((char *)NULL);
+    }
+
+#if 0
+  /* If readline() is called after installing a callback handler, temporarily
+     turn off the callback state to avoid ensuing messiness.  Patch supplied
+     by the gdb folks.  XXX -- disabled.  This can be fooled and readline
+     left in a strange state by a poorly-timed longjmp. */
+  if (in_callback = RL_ISSTATE (RL_STATE_CALLBACK))
+    RL_UNSETSTATE (RL_STATE_CALLBACK);
+#endif
+
+  rl_set_prompt (prompt);
+
+  rl_initialize ();
+  if (rl_prep_term_function)
+    (*rl_prep_term_function) (_rl_meta_flag);
+
+#if defined (HANDLE_SIGNALS)
+  rl_set_signals ();
+#endif
+
+  value = readline_internal ();
+  if (rl_deprep_term_function)
+    (*rl_deprep_term_function) ();
+
+#if defined (HANDLE_SIGNALS)
+  rl_clear_signals ();
+#endif
+
+#if 0
+  if (in_callback)
+    RL_SETSTATE (RL_STATE_CALLBACK);
+#endif
+
+#if HAVE_DECL_AUDIT_USER_TTY && defined (HAVE_LIBAUDIT_H) && defined (ENABLE_TTY_AUDIT_SUPPORT)
+  if (value)
+    _rl_audit_tty (value);
+#endif
+
+  return (value);
+}
+
+#if defined (READLINE_CALLBACKS)
+#  define STATIC_CALLBACK
+#else
+#  define STATIC_CALLBACK static
+#endif
+
+STATIC_CALLBACK void
+readline_internal_setup (void)
+{
+  char *nprompt;
+
+  _rl_in_stream = rl_instream;
+  _rl_out_stream = rl_outstream;
+
+  /* Enable the meta key only for the duration of readline(), if this
+     terminal has one and the terminal has been initialized */
+  if (_rl_enable_meta & RL_ISSTATE (RL_STATE_TERMPREPPED))
+    _rl_enable_meta_key ();
+
+  if (rl_startup_hook)
+    (*rl_startup_hook) ();
+
+  if (_rl_internal_startup_hook)
+    (*_rl_internal_startup_hook) ();
+
+  rl_deactivate_mark ();
+
+#if defined (VI_MODE)
+  if (rl_editing_mode == vi_mode)
+    rl_vi_insertion_mode (1, 'i');	/* don't want to reset last */
+  else
+#endif /* VI_MODE */
+    if (_rl_show_mode_in_prompt)
+      _rl_reset_prompt ();
+
+  /* If we're not echoing, we still want to at least print a prompt, because
+     rl_redisplay will not do it for us.  If the calling application has a
+     custom redisplay function, though, let that function handle it. */
+  if (_rl_echoing_p == 0 && rl_redisplay_function == rl_redisplay)
+    {
+      if (rl_prompt && rl_already_prompted == 0)
+	{
+	  nprompt = _rl_strip_prompt (rl_prompt);
+	  fprintf (_rl_out_stream, "%s", nprompt);
+	  fflush (_rl_out_stream);
+	  xfree (nprompt);
+	}
+    }
+  else
+    {
+      if (rl_prompt && rl_already_prompted)
+	rl_on_new_line_with_prompt ();
+      else
+	rl_on_new_line ();
+      (*rl_redisplay_function) ();
+    }
+
+  if (rl_pre_input_hook)
+    (*rl_pre_input_hook) ();
+
+  RL_CHECK_SIGNALS ();
+}
+
+STATIC_CALLBACK char *
+readline_internal_teardown (int eof)
+{
+  char *temp;
+  HIST_ENTRY *entry;
+
+  RL_CHECK_SIGNALS ();
+
+  /* Restore the original of this history line, iff the line that we
+     are editing was originally in the history, AND the line has changed. */
+  entry = current_history ();
+
+  if (entry && rl_undo_list)
+    {
+      temp = savestring (the_line);
+      rl_revert_line (1, 0);
+      entry = replace_history_entry (where_history (), the_line, (histdata_t)NULL);
+      _rl_free_history_entry (entry);
+
+      strcpy (the_line, temp);
+      xfree (temp);
+    }
+
+  if (_rl_revert_all_at_newline)
+    _rl_revert_all_lines ();
+
+  /* At any rate, it is highly likely that this line has an undo list.  Get
+     rid of it now. */
+  if (rl_undo_list)
+    rl_free_undo_list ();
+
+  /* Disable the meta key, if this terminal has one and we were told to use it.
+     The check whether or not we sent the enable string is in
+     _rl_disable_meta_key(); the flag is set in _rl_enable_meta_key */
+  _rl_disable_meta_key ();
+
+  /* Restore normal cursor, if available. */
+  _rl_set_insert_mode (RL_IM_INSERT, 0);
+
+  return (eof ? (char *)NULL : savestring (the_line));
+}
+
+void
+_rl_internal_char_cleanup (void)
+{
+#if defined (VI_MODE)
+  /* In vi mode, when you exit insert mode, the cursor moves back
+     over the previous character.  We explicitly check for that here. */
+  if (rl_editing_mode == vi_mode && _rl_keymap == vi_movement_keymap)
+    rl_vi_check ();
+#endif /* VI_MODE */
+
+  if (rl_num_chars_to_read && rl_end >= rl_num_chars_to_read)
+    {
+      (*rl_redisplay_function) ();
+      _rl_want_redisplay = 0;
+      rl_newline (1, '\n');
+    }
+
+  if (rl_done == 0)
+    {
+      (*rl_redisplay_function) ();
+      _rl_want_redisplay = 0;
+    }
+
+  /* If the application writer has told us to erase the entire line if
+     the only character typed was something bound to rl_newline, do so. */
+  if (rl_erase_empty_line && rl_done && rl_last_func == rl_newline &&
+      rl_point == 0 && rl_end == 0)
+    _rl_erase_entire_line ();
+}
+
+STATIC_CALLBACK int
+#if defined (READLINE_CALLBACKS)
+readline_internal_char (void)
+#else
+readline_internal_charloop (void)
+#endif
+{
+  static int lastc, eof_found;
+  int c, code, lk, r;
+
+  lastc = EOF;
+
+#if !defined (READLINE_CALLBACKS)
+  eof_found = 0;
+  while (rl_done == 0)
+    {
+#endif
+      lk = _rl_last_command_was_kill;
+
+#if defined (HAVE_POSIX_SIGSETJMP)
+      code = sigsetjmp (_rl_top_level, 0);
+#else
+      code = setjmp (_rl_top_level);
+#endif
+
+      if (code)
+	{
+	  (*rl_redisplay_function) ();
+	  _rl_want_redisplay = 0;
+	  /* If we get here, we're not being called from something dispatched
+	     from _rl_callback_read_char(), which sets up its own value of
+	     _rl_top_level (saving and restoring the old, of course), so
+	     we can just return here. */
+	  if (RL_ISSTATE (RL_STATE_CALLBACK))
+	    return (0);
+	}
+
+      if (rl_pending_input == 0)
+	{
+	  /* Then initialize the argument and number of keys read. */
+	  _rl_reset_argument ();
+	  rl_executing_keyseq[rl_key_sequence_length = 0] = '\0';
+	}
+
+      RL_SETSTATE(RL_STATE_READCMD);
+      c = rl_read_key ();
+      RL_UNSETSTATE(RL_STATE_READCMD);
+
+      /* look at input.c:rl_getc() for the circumstances under which this will
+	 be returned; punt immediately on read error without converting it to
+	 a newline; assume that rl_read_key has already called the signal
+	 handler. */
+      if (c == READERR)
+	{
+#if defined (READLINE_CALLBACKS)
+	  RL_SETSTATE(RL_STATE_DONE);
+	  return (rl_done = 1);
+#else
+	  eof_found = 1;
+	  break;
+#endif
+	}
+
+      /* EOF typed to a non-blank line is ^D the first time, EOF the second
+	 time in a row.  This won't return any partial line read from the tty.
+	 If we want to change this, to force any existing line to be returned
+	 when read(2) reads EOF, for example, this is the place to change. */
+      if (c == EOF && rl_end)
+	{
+	  if (RL_SIG_RECEIVED ())
+	    {
+	      RL_CHECK_SIGNALS ();
+	      if (rl_signal_event_hook)
+		(*rl_signal_event_hook) ();		/* XXX */
+	    }
+
+	  /* XXX - reading two consecutive EOFs returns EOF */
+	  if (RL_ISSTATE (RL_STATE_TERMPREPPED))
+	    {
+	      if (lastc == _rl_eof_char || lastc == EOF)
+		rl_end = 0;
+	      else
+	        c = _rl_eof_char;
+	    }
+	  else
+	    c = NEWLINE;
+	}
+
+      /* The character _rl_eof_char typed to blank line, and not as the
+	 previous character is interpreted as EOF.  This doesn't work when
+	 READLINE_CALLBACKS is defined, so hitting a series of ^Ds will
+	 erase all the chars on the line and then return EOF. */
+      if (((c == _rl_eof_char && lastc != c) || c == EOF) && rl_end == 0)
+	{
+#if defined (READLINE_CALLBACKS)
+	  RL_SETSTATE(RL_STATE_DONE);
+	  return (rl_done = 1);
+#else
+	  eof_found = 1;
+	  break;
+#endif
+	}
+
+      lastc = c;
+      r = _rl_dispatch ((unsigned char)c, _rl_keymap);
+      RL_CHECK_SIGNALS ();
+
+      if (_rl_command_to_execute)
+	{
+	  (*rl_redisplay_function) ();
+
+	  rl_executing_keymap = _rl_command_to_execute->map;
+	  rl_executing_key = _rl_command_to_execute->key;
+
+	  rl_dispatching = 1;
+	  RL_SETSTATE(RL_STATE_DISPATCHING);
+	  r = (*(_rl_command_to_execute->func)) (_rl_command_to_execute->count, _rl_command_to_execute->key);
+	  _rl_command_to_execute = 0;
+	  RL_UNSETSTATE(RL_STATE_DISPATCHING);
+	  rl_dispatching = 0;
+
+	  RL_CHECK_SIGNALS ();
+	}
+
+      /* If there was no change in _rl_last_command_was_kill, then no kill
+	 has taken place.  Note that if input is pending we are reading
+	 a prefix command, so nothing has changed yet. */
+      if (rl_pending_input == 0 && lk == _rl_last_command_was_kill)
+	_rl_last_command_was_kill = 0;
+
+      if (_rl_keep_mark_active)
+        _rl_keep_mark_active = 0;
+      else if (rl_mark_active_p ())
+        rl_deactivate_mark ();
+
+      _rl_internal_char_cleanup ();
+
+#if defined (READLINE_CALLBACKS)
+      return 0;
+#else
+    }
+
+  return (eof_found);
+#endif
+}
+
+#if defined (READLINE_CALLBACKS)
+static int
+readline_internal_charloop (void)
+{
+  int eof = 1;
+
+  while (rl_done == 0)
+    eof = readline_internal_char ();
+  return (eof);
+}
+#endif /* READLINE_CALLBACKS */
+
+/* Read a line of input from the global rl_instream, doing output on
+   the global rl_outstream.
+   If rl_prompt is non-null, then that is our prompt. */
+static char *
+readline_internal (void)
+{
+  readline_internal_setup ();
+  _rl_eof_found = readline_internal_charloop ();
+  return (readline_internal_teardown (_rl_eof_found));
+}
+
+void
+_rl_init_line_state (void)
+{
+  rl_point = rl_end = rl_mark = 0;
+  the_line = rl_line_buffer;
+  the_line[0] = 0;
+}
+
+void
+_rl_set_the_line (void)
+{
+  the_line = rl_line_buffer;
+}
+
+#if defined (READLINE_CALLBACKS)
+_rl_keyseq_cxt *
+_rl_keyseq_cxt_alloc (void)
+{
+  _rl_keyseq_cxt *cxt;
+
+  cxt = (_rl_keyseq_cxt *)xmalloc (sizeof (_rl_keyseq_cxt));
+
+  cxt->flags = cxt->subseq_arg = cxt->subseq_retval = 0;
+
+  cxt->okey = 0;
+  cxt->ocxt = _rl_kscxt;
+  cxt->childval = 42;		/* sentinel value */
+
+  return cxt;
+}
+
+void
+_rl_keyseq_cxt_dispose (_rl_keyseq_cxt *cxt)
+{
+  xfree (cxt);
+}
+
+void
+_rl_keyseq_chain_dispose (void)
+{
+  _rl_keyseq_cxt *cxt;
+
+  while (_rl_kscxt)
+    {
+      cxt = _rl_kscxt;
+      _rl_kscxt = _rl_kscxt->ocxt;
+      _rl_keyseq_cxt_dispose (cxt);
+    }
+}
+#endif
+
+static int
+_rl_subseq_getchar (int key)
+{
+  int k;
+
+  if (key == ESC)
+    RL_SETSTATE(RL_STATE_METANEXT);
+  RL_SETSTATE(RL_STATE_MOREINPUT);
+  k = rl_read_key ();
+  RL_UNSETSTATE(RL_STATE_MOREINPUT);
+  if (key == ESC)
+    RL_UNSETSTATE(RL_STATE_METANEXT);
+
+  return k;
+}
+
+#if defined (READLINE_CALLBACKS)
+int
+_rl_dispatch_callback (_rl_keyseq_cxt *cxt)
+{
+  int nkey, r;
+
+  /* For now */
+  /* The first time this context is used, we want to read input and dispatch
+     on it.  When traversing the chain of contexts back `up', we want to use
+     the value from the next context down.  We're simulating recursion using
+     a chain of contexts. */
+  if ((cxt->flags & KSEQ_DISPATCHED) == 0)
+    {
+      nkey = _rl_subseq_getchar (cxt->okey);
+      if (nkey < 0)
+	{
+	  _rl_abort_internal ();
+	  return -1;
+	}
+      r = _rl_dispatch_subseq (nkey, cxt->dmap, cxt->subseq_arg);
+      cxt->flags |= KSEQ_DISPATCHED;
+    }
+  else
+    r = cxt->childval;
+
+  /* For now */
+  if (r != -3)	/* don't do this if we indicate there will be other matches */
+    r = _rl_subseq_result (r, cxt->oldmap, cxt->okey, (cxt->flags & KSEQ_SUBSEQ));
+
+  RL_CHECK_SIGNALS ();
+  /* We only treat values < 0 specially to simulate recursion. */
+  if (r >= 0 || (r == -1 && (cxt->flags & KSEQ_SUBSEQ) == 0))	/* success! or failure! */
+    {
+      _rl_keyseq_chain_dispose ();
+      RL_UNSETSTATE (RL_STATE_MULTIKEY);
+      return r;
+    }
+
+  if (r != -3)			/* magic value that says we added to the chain */
+    _rl_kscxt = cxt->ocxt;
+  if (_rl_kscxt)
+    _rl_kscxt->childval = r;
+  if (r != -3)
+    _rl_keyseq_cxt_dispose (cxt);
+
+  return r;
+}
+#endif /* READLINE_CALLBACKS */
+  
+/* Do the command associated with KEY in MAP.
+   If the associated command is really a keymap, then read
+   another key, and dispatch into that map. */
+int
+_rl_dispatch (register int key, Keymap map)
+{
+  _rl_dispatching_keymap = map;
+  return _rl_dispatch_subseq (key, map, 0);
+}
+
+int
+_rl_dispatch_subseq (register int key, Keymap map, int got_subseq)
+{
+  int r, newkey;
+  char *macro;
+  rl_command_func_t *func;
+#if defined (READLINE_CALLBACKS)
+  _rl_keyseq_cxt *cxt;
+#endif
+
+  if (META_CHAR (key) && _rl_convert_meta_chars_to_ascii)
+    {
+      if (map[ESC].type == ISKMAP)
+	{
+	  if (RL_ISSTATE (RL_STATE_MACRODEF))
+	    _rl_add_macro_char (ESC);
+	  RESIZE_KEYSEQ_BUFFER ();
+	  rl_executing_keyseq[rl_key_sequence_length++] = ESC;
+	  map = FUNCTION_TO_KEYMAP (map, ESC);
+	  key = UNMETA (key);
+	  return (_rl_dispatch (key, map));
+	}
+      else
+	rl_ding ();
+      return 0;
+    }
+
+  if (RL_ISSTATE (RL_STATE_MACRODEF))
+    _rl_add_macro_char (key);
+
+  r = 0;
+  switch (map[key].type)
+    {
+    case ISFUNC:
+      func = map[key].function;
+      if (func)
+	{
+	  /* Special case rl_do_lowercase_version (). */
+	  if (func == rl_do_lowercase_version)
+	    /* Should we do anything special if key == ANYOTHERKEY? */
+	    return (_rl_dispatch (_rl_to_lower ((unsigned char)key), map));
+
+	  rl_executing_keymap = map;
+	  rl_executing_key = key;
+
+	  RESIZE_KEYSEQ_BUFFER();
+	  rl_executing_keyseq[rl_key_sequence_length++] = key;
+	  rl_executing_keyseq[rl_key_sequence_length] = '\0';
+
+	  rl_dispatching = 1;
+	  RL_SETSTATE(RL_STATE_DISPATCHING);
+	  r = (*func) (rl_numeric_arg * rl_arg_sign, key);
+	  RL_UNSETSTATE(RL_STATE_DISPATCHING);
+	  rl_dispatching = 0;
+
+	  /* If we have input pending, then the last command was a prefix
+	     command.  Don't change the state of rl_last_func.  Otherwise,
+	     remember the last command executed in this variable. */
+#if defined (VI_MODE)
+	  if (rl_pending_input == 0 && map[key].function != rl_digit_argument && map[key].function != rl_vi_arg_digit)
+#else
+	  if (rl_pending_input == 0 && map[key].function != rl_digit_argument)
+#endif
+	    rl_last_func = map[key].function;
+
+	  RL_CHECK_SIGNALS ();
+	}
+      else if (map[ANYOTHERKEY].function)
+	{
+	  /* OK, there's no function bound in this map, but there is a
+	     shadow function that was overridden when the current keymap
+	     was created.  Return -2 to note  that. */
+	  if (RL_ISSTATE (RL_STATE_MACROINPUT))
+	    _rl_prev_macro_key ();
+	  else
+	    _rl_unget_char  (key);
+	  if (rl_key_sequence_length > 0)
+	    rl_executing_keyseq[--rl_key_sequence_length] = '\0';
+	  return -2;
+	}
+      else if (got_subseq)
+	{
+	  /* Return -1 to note that we're in a subsequence, but  we don't
+	     have a matching key, nor was one overridden.  This means
+	     we need to back up the recursion chain and find the last
+	     subsequence that is bound to a function. */
+	  if (RL_ISSTATE (RL_STATE_MACROINPUT))
+	    _rl_prev_macro_key ();
+	  else
+	    _rl_unget_char (key);
+	  if (rl_key_sequence_length > 0)
+	    rl_executing_keyseq[--rl_key_sequence_length] = '\0';
+	  return -1;
+	}
+      else
+	{
+#if defined (READLINE_CALLBACKS)
+	  RL_UNSETSTATE (RL_STATE_MULTIKEY);
+	  _rl_keyseq_chain_dispose ();
+#endif
+	  _rl_abort_internal ();
+	  return -1;
+	}
+      break;
+
+    case ISKMAP:
+      if (map[key].function != 0)
+	{
+#if defined (VI_MODE)
+	  /* The only way this test will be true is if a subsequence has been
+	     bound starting with ESC, generally the arrow keys.  What we do is
+	     check whether there's input in the queue, which there generally
+	     will be if an arrow key has been pressed, and, if there's not,
+	     just dispatch to (what we assume is) rl_vi_movement_mode right
+	     away.  This is essentially an input test with a zero timeout (by
+	     default) or a timeout determined by the value of `keyseq-timeout' */
+	  /* _rl_keyseq_timeout specified in milliseconds; _rl_input_queued
+	     takes microseconds, so multiply by 1000 */
+	  if (rl_editing_mode == vi_mode && key == ESC && map == vi_insertion_keymap &&
+	      (RL_ISSTATE (RL_STATE_INPUTPENDING|RL_STATE_MACROINPUT) == 0) &&
+              _rl_pushed_input_available () == 0 &&
+	      _rl_input_queued ((_rl_keyseq_timeout > 0) ? _rl_keyseq_timeout*1000 : 0) == 0)
+	    return (_rl_dispatch (ANYOTHERKEY, FUNCTION_TO_KEYMAP (map, key)));
+	  /* This is a very specific test.  It can possibly be generalized in
+	     the future, but for now it handles a specific case of ESC being
+	     the last character in a keyboard macro. */
+	  if (rl_editing_mode == vi_mode && key == ESC && map == vi_insertion_keymap &&
+	      (RL_ISSTATE (RL_STATE_INPUTPENDING) == 0) &&
+	      (RL_ISSTATE (RL_STATE_MACROINPUT) && _rl_peek_macro_key () == 0) &&
+	      _rl_pushed_input_available () == 0 &&
+	      _rl_input_queued ((_rl_keyseq_timeout > 0) ? _rl_keyseq_timeout*1000 : 0) == 0)
+	    return (_rl_dispatch (ANYOTHERKEY, FUNCTION_TO_KEYMAP (map, key)));	      
+#endif
+
+	  RESIZE_KEYSEQ_BUFFER ();
+	  rl_executing_keyseq[rl_key_sequence_length++] = key;
+	  _rl_dispatching_keymap = FUNCTION_TO_KEYMAP (map, key);
+
+	  /* Allocate new context here.  Use linked contexts (linked through
+	     cxt->ocxt) to simulate recursion */
+#if defined (READLINE_CALLBACKS)
+#  if defined (VI_MODE)
+	  /* If we're redoing a vi mode command and we know there is a shadowed
+	     function corresponding to this key, just call it -- all the redoable
+	     vi mode commands already have all the input they need, and rl_vi_redo
+	     assumes that one call to rl_dispatch is sufficient to complete the
+	     command. */
+	  if (_rl_vi_redoing && RL_ISSTATE (RL_STATE_CALLBACK) &&
+	      map[ANYOTHERKEY].function != 0)
+	    return (_rl_subseq_result (-2, map, key, got_subseq));
+#  endif
+	  if (RL_ISSTATE (RL_STATE_CALLBACK))
+	    {
+	      /* Return 0 only the first time, to indicate success to
+		 _rl_callback_read_char.  The rest of the time, we're called
+		 from _rl_dispatch_callback, so we return -3 to indicate
+		 special handling is necessary. */
+	      r = RL_ISSTATE (RL_STATE_MULTIKEY) ? -3 : 0;
+	      cxt = _rl_keyseq_cxt_alloc ();
+
+	      if (got_subseq)
+		cxt->flags |= KSEQ_SUBSEQ;
+	      cxt->okey = key;
+	      cxt->oldmap = map;
+	      cxt->dmap = _rl_dispatching_keymap;
+	      cxt->subseq_arg = got_subseq || cxt->dmap[ANYOTHERKEY].function;
+
+	      RL_SETSTATE (RL_STATE_MULTIKEY);
+	      _rl_kscxt = cxt;
+
+	      return r;		/* don't indicate immediate success */
+	    }
+#endif
+
+	  /* Tentative inter-character timeout for potential multi-key
+	     sequences?  If no input within timeout, abort sequence and
+	     act as if we got non-matching input. */
+	  /* _rl_keyseq_timeout specified in milliseconds; _rl_input_queued
+	     takes microseconds, so multiply by 1000 */
+	  if (_rl_keyseq_timeout > 0 &&
+	  	(RL_ISSTATE (RL_STATE_INPUTPENDING|RL_STATE_MACROINPUT) == 0) &&
+	  	_rl_pushed_input_available () == 0 &&
+		_rl_dispatching_keymap[ANYOTHERKEY].function &&
+		_rl_input_queued (_rl_keyseq_timeout*1000) == 0)
+	    {
+	      if (rl_key_sequence_length > 0)
+		rl_executing_keyseq[--rl_key_sequence_length] = '\0';
+	      return (_rl_subseq_result (-2, map, key, got_subseq));
+	    }
+
+	  newkey = _rl_subseq_getchar (key);
+	  if (newkey < 0)
+	    {
+	      _rl_abort_internal ();
+	      return -1;
+	    }
+
+	  r = _rl_dispatch_subseq (newkey, _rl_dispatching_keymap, got_subseq || map[ANYOTHERKEY].function);
+	  return _rl_subseq_result (r, map, key, got_subseq);
+	}
+      else
+	{
+	  _rl_abort_internal ();	/* XXX */
+	  return -1;
+	}
+      break;
+
+    case ISMACR:
+      if (map[key].function != 0)
+	{
+	  rl_executing_keyseq[rl_key_sequence_length] = '\0';
+	  macro = savestring ((char *)map[key].function);
+	  _rl_with_macro_input (macro);
+	  return 0;
+	}
+      break;
+    }
+
+#if defined (VI_MODE)
+  if (rl_editing_mode == vi_mode && _rl_keymap == vi_movement_keymap &&
+      key != ANYOTHERKEY &&
+      _rl_dispatching_keymap == vi_movement_keymap &&
+      _rl_vi_textmod_command (key))
+    _rl_vi_set_last (key, rl_numeric_arg, rl_arg_sign);
+#endif
+
+  return (r);
+}
+
+static int
+_rl_subseq_result (int r, Keymap map, int key, int got_subseq)
+{
+  Keymap m;
+  int type, nt;
+  rl_command_func_t *func, *nf;
+
+  if (r == -2)
+    /* We didn't match anything, and the keymap we're indexed into
+       shadowed a function previously bound to that prefix.  Call
+       the function.  The recursive call to _rl_dispatch_subseq has
+       already taken care of pushing any necessary input back onto
+       the input queue with _rl_unget_char. */
+    {
+      m = _rl_dispatching_keymap;
+      type = m[ANYOTHERKEY].type;
+      func = m[ANYOTHERKEY].function;
+      if (type == ISFUNC && func == rl_do_lowercase_version)
+	r = _rl_dispatch (_rl_to_lower ((unsigned char)key), map);
+      else if (type == ISFUNC)
+	{
+	  /* If we shadowed a function, whatever it is, we somehow need a
+	     keymap with map[key].func == shadowed-function.
+	     Let's use this one.  Then we can dispatch using the original
+	     key, since there are commands (e.g., in vi mode) for which it
+	     matters. */
+	  nt = m[key].type;
+	  nf = m[key].function;
+
+	  m[key].type = type;
+	  m[key].function = func;
+	  /* Don't change _rl_dispatching_keymap, set it here */
+	  _rl_dispatching_keymap = map;		/* previous map */
+	  r = _rl_dispatch_subseq (key, m, 0);
+	  m[key].type = nt;
+	  m[key].function = nf;
+	}
+      else
+	/* We probably shadowed a keymap, so keep going. */
+	r = _rl_dispatch (ANYOTHERKEY, m);
+    }
+  else if (r < 0 && map[ANYOTHERKEY].function)
+    {
+      /* We didn't match (r is probably -1), so return something to
+	 tell the caller that it should try ANYOTHERKEY for an
+	 overridden function. */
+      if (RL_ISSTATE (RL_STATE_MACROINPUT))
+	_rl_prev_macro_key ();
+      else
+	_rl_unget_char (key);
+      if (rl_key_sequence_length > 0)
+	rl_executing_keyseq[--rl_key_sequence_length] = '\0';
+      _rl_dispatching_keymap = map;
+      return -2;
+    }
+  else if (r < 0 && got_subseq)		/* XXX */
+    {
+      /* OK, back up the chain. */
+      if (RL_ISSTATE (RL_STATE_MACROINPUT))
+	_rl_prev_macro_key ();
+      else
+	_rl_unget_char (key);
+      if (rl_key_sequence_length > 0)
+	rl_executing_keyseq[--rl_key_sequence_length] = '\0';
+      _rl_dispatching_keymap = map;
+      return -1;
+    }
+
+  return r;
+}
+
+/* **************************************************************** */
+/*								    */
+/*			Initializations 			    */
+/*								    */
+/* **************************************************************** */
+
+/* Initialize readline (and terminal if not already). */
+int
+rl_initialize (void)
+{
+  /* If we have never been called before, initialize the
+     terminal and data structures. */
+  if (rl_initialized == 0)
+    {
+      RL_SETSTATE(RL_STATE_INITIALIZING);
+      readline_initialize_everything ();
+      RL_UNSETSTATE(RL_STATE_INITIALIZING);
+      rl_initialized++;
+      RL_SETSTATE(RL_STATE_INITIALIZED);
+    }
+  else
+    (void)_rl_init_locale ();	/* check current locale */
+
+  /* Initialize the current line information. */
+  _rl_init_line_state ();
+
+  /* We aren't done yet.  We haven't even gotten started yet! */
+  rl_done = 0;
+  RL_UNSETSTATE(RL_STATE_DONE);
+
+  /* Tell the history routines what is going on. */
+  _rl_start_using_history ();
+
+  /* Make the display buffer match the state of the line. */
+  rl_reset_line_state ();
+
+  /* No such function typed yet. */
+  rl_last_func = (rl_command_func_t *)NULL;
+
+  /* Parsing of key-bindings begins in an enabled state. */
+  _rl_parsing_conditionalized_out = 0;
+
+#if defined (VI_MODE)
+  if (rl_editing_mode == vi_mode)
+    _rl_vi_initialize_line ();
+#endif
+
+  /* Each line starts in insert mode (the default). */
+  _rl_set_insert_mode (RL_IM_DEFAULT, 1);
+
+  return 0;
+}
+
+#if 0
+#if defined (__EMX__)
+static void
+_emx_build_environ (void)
+{
+  TIB *tibp;
+  PIB *pibp;
+  char *t, **tp;
+  int c;
+
+  DosGetInfoBlocks (&tibp, &pibp);
+  t = pibp->pib_pchenv;
+  for (c = 1; *t; c++)
+    t += strlen (t) + 1;
+  tp = environ = (char **)xmalloc ((c + 1) * sizeof (char *));
+  t = pibp->pib_pchenv;
+  while (*t)
+    {
+      *tp++ = t;
+      t += strlen (t) + 1;
+    }
+  *tp = 0;
+}
+#endif /* __EMX__ */
+#endif
+
+/* Initialize the entire state of the world. */
+static void
+readline_initialize_everything (void)
+{
+#if 0
+#if defined (__EMX__)
+  if (environ == 0)
+    _emx_build_environ ();
+#endif
+#endif
+
+#if 0
+  /* Find out if we are running in Emacs -- UNUSED. */
+  running_in_emacs = sh_get_env_value ("EMACS") != (char *)0;
+#endif
+
+  /* Set up input and output if they are not already set up. */
+  if (!rl_instream)
+    rl_instream = stdin;
+
+  if (!rl_outstream)
+    rl_outstream = stdout;
+
+  /* Bind _rl_in_stream and _rl_out_stream immediately.  These values
+     may change, but they may also be used before readline_internal ()
+     is called. */
+  _rl_in_stream = rl_instream;
+  _rl_out_stream = rl_outstream;
+
+  /* Allocate data structures. */
+  if (rl_line_buffer == 0)
+    rl_line_buffer = (char *)xmalloc (rl_line_buffer_len = DEFAULT_BUFFER_SIZE);
+
+  /* Initialize the terminal interface. */
+  if (rl_terminal_name == 0)
+    rl_terminal_name = sh_get_env_value ("TERM");
+  _rl_init_terminal_io (rl_terminal_name);
+
+  /* Bind tty characters to readline functions. */
+  readline_default_bindings ();
+
+  /* Initialize the function names. */
+  rl_initialize_funmap ();
+
+  /* Decide whether we should automatically go into eight-bit mode. */
+  _rl_init_eightbit ();
+      
+  /* Read in the init file. */
+  rl_read_init_file ((char *)NULL);
+
+  /* XXX */
+  if (_rl_horizontal_scroll_mode && _rl_term_autowrap)
+    {
+      _rl_screenwidth--;
+      _rl_screenchars -= _rl_screenheight;
+    }
+
+  /* Override the effect of any `set keymap' assignments in the
+     inputrc file. */
+  rl_set_keymap_from_edit_mode ();
+
+  /* Try to bind a common arrow key prefix, if not already bound. */
+  bind_arrow_keys ();
+
+  /* Bind the bracketed paste prefix assuming that the user will enable
+     it on terminals that support it. */
+  bind_bracketed_paste_prefix ();
+
+  /* If the completion parser's default word break characters haven't
+     been set yet, then do so now. */
+  if (rl_completer_word_break_characters == (char *)NULL)
+    rl_completer_word_break_characters = (char *)rl_basic_word_break_characters;
+
+#if defined (COLOR_SUPPORT)
+  if (_rl_colored_stats || _rl_colored_completion_prefix)
+    _rl_parse_colors ();
+#endif
+
+  rl_executing_keyseq = malloc (_rl_executing_keyseq_size = 16);
+  if (rl_executing_keyseq)
+    rl_executing_keyseq[rl_key_sequence_length = 0] = '\0';
+}
+
+/* If this system allows us to look at the values of the regular
+   input editing characters, then bind them to their readline
+   equivalents, iff the characters are not bound to keymaps. */
+static void
+readline_default_bindings (void)
+{
+  if (_rl_bind_stty_chars)
+    rl_tty_set_default_bindings (_rl_keymap);
+}
+
+/* Reset the default bindings for the terminal special characters we're
+   interested in back to rl_insert and read the new ones. */
+static void
+reset_default_bindings (void)
+{
+  if (_rl_bind_stty_chars)
+    {
+      rl_tty_unset_default_bindings (_rl_keymap);
+      rl_tty_set_default_bindings (_rl_keymap);
+    }
+}
+
+/* Bind some common arrow key sequences in MAP. */
+static void
+bind_arrow_keys_internal (Keymap map)
+{
+  Keymap xkeymap;
+
+  xkeymap = _rl_keymap;
+  _rl_keymap = map;
+
+#if defined (__MSDOS__)
+  rl_bind_keyseq_if_unbound ("\033[0A", rl_get_previous_history);
+  rl_bind_keyseq_if_unbound ("\033[0B", rl_backward_char);
+  rl_bind_keyseq_if_unbound ("\033[0C", rl_forward_char);
+  rl_bind_keyseq_if_unbound ("\033[0D", rl_get_next_history);
+#endif
+
+  rl_bind_keyseq_if_unbound ("\033[A", rl_get_previous_history);
+  rl_bind_keyseq_if_unbound ("\033[B", rl_get_next_history);
+  rl_bind_keyseq_if_unbound ("\033[C", rl_forward_char);
+  rl_bind_keyseq_if_unbound ("\033[D", rl_backward_char);
+  rl_bind_keyseq_if_unbound ("\033[H", rl_beg_of_line);
+  rl_bind_keyseq_if_unbound ("\033[F", rl_end_of_line);
+
+  rl_bind_keyseq_if_unbound ("\033OA", rl_get_previous_history);
+  rl_bind_keyseq_if_unbound ("\033OB", rl_get_next_history);
+  rl_bind_keyseq_if_unbound ("\033OC", rl_forward_char);
+  rl_bind_keyseq_if_unbound ("\033OD", rl_backward_char);
+  rl_bind_keyseq_if_unbound ("\033OH", rl_beg_of_line);
+  rl_bind_keyseq_if_unbound ("\033OF", rl_end_of_line);
+
+  /* Key bindings for control-arrow keys */
+  rl_bind_keyseq_if_unbound ("\033[1;5C", rl_forward_word);
+  rl_bind_keyseq_if_unbound ("\033[1;5D", rl_backward_word);
+  rl_bind_keyseq_if_unbound ("\033[3;5~", rl_kill_word);
+
+  /* Key bindings for alt-arrow keys */
+  rl_bind_keyseq_if_unbound ("\033[1;3C", rl_forward_word);
+  rl_bind_keyseq_if_unbound ("\033[1;3D", rl_backward_word);
+
+#if defined (__MINGW32__)
+  rl_bind_keyseq_if_unbound ("\340H", rl_get_previous_history);
+  rl_bind_keyseq_if_unbound ("\340P", rl_get_next_history);
+  rl_bind_keyseq_if_unbound ("\340M", rl_forward_char);
+  rl_bind_keyseq_if_unbound ("\340K", rl_backward_char);
+  rl_bind_keyseq_if_unbound ("\340G", rl_beg_of_line);
+  rl_bind_keyseq_if_unbound ("\340O", rl_end_of_line);
+  rl_bind_keyseq_if_unbound ("\340S", rl_delete);
+  rl_bind_keyseq_if_unbound ("\340R", rl_overwrite_mode);
+
+  /* These may or may not work because of the embedded NUL. */
+  rl_bind_keyseq_if_unbound ("\\000H", rl_get_previous_history);
+  rl_bind_keyseq_if_unbound ("\\000P", rl_get_next_history);
+  rl_bind_keyseq_if_unbound ("\\000M", rl_forward_char);
+  rl_bind_keyseq_if_unbound ("\\000K", rl_backward_char);
+  rl_bind_keyseq_if_unbound ("\\000G", rl_beg_of_line);
+  rl_bind_keyseq_if_unbound ("\\000O", rl_end_of_line);
+  rl_bind_keyseq_if_unbound ("\\000S", rl_delete);
+  rl_bind_keyseq_if_unbound ("\\000R", rl_overwrite_mode);
+#endif
+
+  _rl_keymap = xkeymap;
+}
+
+/* Try and bind the common arrow key prefixes after giving termcap and
+   the inputrc file a chance to bind them and create `real' keymaps
+   for the arrow key prefix. */
+static void
+bind_arrow_keys (void)
+{
+  bind_arrow_keys_internal (emacs_standard_keymap);
+
+#if defined (VI_MODE)
+  bind_arrow_keys_internal (vi_movement_keymap);
+  /* Unbind vi_movement_keymap[ESC] to allow users to repeatedly hit ESC
+     in vi command mode while still allowing the arrow keys to work. */
+  if (vi_movement_keymap[ESC].type == ISKMAP)
+    rl_bind_keyseq_in_map ("\033", (rl_command_func_t *)NULL, vi_movement_keymap);
+  bind_arrow_keys_internal (vi_insertion_keymap);
+#endif
+}
+
+static void
+bind_bracketed_paste_prefix (void)
+{
+  Keymap xkeymap;
+
+  xkeymap = _rl_keymap;
+
+  _rl_keymap = emacs_standard_keymap;
+  rl_bind_keyseq_if_unbound (BRACK_PASTE_PREF, rl_bracketed_paste_begin);
+
+#if defined (VI_MODE)
+  _rl_keymap = vi_insertion_keymap;
+  rl_bind_keyseq_if_unbound (BRACK_PASTE_PREF, rl_bracketed_paste_begin);
+  /* XXX - is there a reason to do this in the vi command keymap? */
+#endif
+
+  _rl_keymap = xkeymap;
+}
+  
+/* **************************************************************** */
+/*								    */
+/*		Saving and Restoring Readline's state		    */
+/*								    */
+/* **************************************************************** */
+
+int
+rl_save_state (struct readline_state *sp)
+{
+  if (sp == 0)
+    return -1;
+
+  sp->point = rl_point;
+  sp->end = rl_end;
+  sp->mark = rl_mark;
+  sp->buffer = rl_line_buffer;
+  sp->buflen = rl_line_buffer_len;
+  sp->ul = rl_undo_list;
+  sp->prompt = rl_prompt;
+
+  sp->rlstate = rl_readline_state;
+  sp->done = rl_done;
+  sp->kmap = _rl_keymap;
+
+  sp->lastfunc = rl_last_func;
+  sp->insmode = rl_insert_mode;
+  sp->edmode = rl_editing_mode;
+  sp->kseq = rl_executing_keyseq;
+  sp->kseqlen = rl_key_sequence_length;
+  sp->inf = rl_instream;
+  sp->outf = rl_outstream;
+  sp->pendingin = rl_pending_input;
+  sp->macro = rl_executing_macro;
+
+  sp->catchsigs = rl_catch_signals;
+  sp->catchsigwinch = rl_catch_sigwinch;
+
+  sp->entryfunc = rl_completion_entry_function;
+  sp->menuentryfunc = rl_menu_completion_entry_function;
+  sp->ignorefunc = rl_ignore_some_completions_function;
+  sp->attemptfunc = rl_attempted_completion_function;
+  sp->wordbreakchars = rl_completer_word_break_characters;
+
+  return (0);
+}
+
+int
+rl_restore_state (struct readline_state *sp)
+{
+  if (sp == 0)
+    return -1;
+
+  rl_point = sp->point;
+  rl_end = sp->end;
+  rl_mark = sp->mark;
+  the_line = rl_line_buffer = sp->buffer;
+  rl_line_buffer_len = sp->buflen;
+  rl_undo_list = sp->ul;
+  rl_prompt = sp->prompt;
+
+  rl_readline_state = sp->rlstate;
+  rl_done = sp->done;
+  _rl_keymap = sp->kmap;
+
+  rl_last_func = sp->lastfunc;
+  rl_insert_mode = sp->insmode;
+  rl_editing_mode = sp->edmode;
+  rl_executing_keyseq = sp->kseq;
+  rl_key_sequence_length = sp->kseqlen;
+  rl_instream = sp->inf;
+  rl_outstream = sp->outf;
+  rl_pending_input = sp->pendingin;
+  rl_executing_macro = sp->macro;
+
+  rl_catch_signals = sp->catchsigs;
+  rl_catch_sigwinch = sp->catchsigwinch;
+
+  rl_completion_entry_function = sp->entryfunc;
+  rl_menu_completion_entry_function = sp->menuentryfunc;
+  rl_ignore_some_completions_function = sp->ignorefunc;
+  rl_attempted_completion_function = sp->attemptfunc;
+  rl_completer_word_break_characters = sp->wordbreakchars;
+
+  rl_deactivate_mark ();
+
+  return (0);
+}
+
+/* Functions to manage the string that is the current key sequence. */
+
+void
+_rl_init_executing_keyseq (void)
+{
+  rl_executing_keyseq[rl_key_sequence_length = 0] = '\0';
+}
+
+void
+_rl_term_executing_keyseq (void)
+{
+  rl_executing_keyseq[rl_key_sequence_length] = '\0';
+}
+
+void
+_rl_end_executing_keyseq (void)
+{
+  if (rl_key_sequence_length > 0)
+    rl_executing_keyseq[--rl_key_sequence_length] = '\0';
+}
+
+void
+_rl_add_executing_keyseq (int key)
+{
+  RESIZE_KEYSEQ_BUFFER ();
+ rl_executing_keyseq[rl_key_sequence_length++] = key;
+}
diff --git a/lib/readline/readline.h b/lib/readline/readline.h
new file mode 100644
index 0000000..78fa39d
--- /dev/null
+++ b/lib/readline/readline.h
@@ -0,0 +1,969 @@
+/* Readline.h -- the names of functions callable from within readline. */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_READLINE_H_)
+#define _READLINE_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined (READLINE_LIBRARY)
+#  include "rlstdc.h"
+#  include "rltypedefs.h"
+#  include "keymaps.h"
+#  include "tilde.h"
+#else
+#  include <readline/rlstdc.h>
+#  include <readline/rltypedefs.h>
+#  include <readline/keymaps.h>
+#  include <readline/tilde.h>
+#endif
+
+/* Hex-encoded Readline version number. */
+#define RL_READLINE_VERSION	0x0801		/* Readline 8.0 */
+#define RL_VERSION_MAJOR	8
+#define RL_VERSION_MINOR	1
+
+/* Readline data structures. */
+
+/* Maintaining the state of undo.  We remember individual deletes and inserts
+   on a chain of things to do. */
+
+/* The actions that undo knows how to undo.  Notice that UNDO_DELETE means
+   to insert some text, and UNDO_INSERT means to delete some text.   I.e.,
+   the code tells undo what to undo, not how to undo it. */
+enum undo_code { UNDO_DELETE, UNDO_INSERT, UNDO_BEGIN, UNDO_END };
+
+/* What an element of THE_UNDO_LIST looks like. */
+typedef struct undo_list {
+  struct undo_list *next;
+  int start, end;		/* Where the change took place. */
+  char *text;			/* The text to insert, if undoing a delete. */
+  enum undo_code what;		/* Delete, Insert, Begin, End. */
+} UNDO_LIST;
+
+/* The current undo list for RL_LINE_BUFFER. */
+extern UNDO_LIST *rl_undo_list;
+
+/* The data structure for mapping textual names to code addresses. */
+typedef struct _funmap {
+  const char *name;
+  rl_command_func_t *function;
+} FUNMAP;
+
+extern FUNMAP **funmap;
+
+/* **************************************************************** */
+/*								    */
+/*	     Functions available to bind to key sequences	    */
+/*								    */
+/* **************************************************************** */
+
+/* Bindable commands for numeric arguments. */
+extern int rl_digit_argument PARAMS((int, int));
+extern int rl_universal_argument PARAMS((int, int));
+
+/* Bindable commands for moving the cursor. */
+extern int rl_forward_byte PARAMS((int, int));
+extern int rl_forward_char PARAMS((int, int));
+extern int rl_forward PARAMS((int, int));
+extern int rl_backward_byte PARAMS((int, int));
+extern int rl_backward_char PARAMS((int, int));
+extern int rl_backward PARAMS((int, int));
+extern int rl_beg_of_line PARAMS((int, int));
+extern int rl_end_of_line PARAMS((int, int));
+extern int rl_forward_word PARAMS((int, int));
+extern int rl_backward_word PARAMS((int, int));
+extern int rl_refresh_line PARAMS((int, int));
+extern int rl_clear_screen PARAMS((int, int));
+extern int rl_clear_display PARAMS((int, int));
+extern int rl_skip_csi_sequence PARAMS((int, int));
+extern int rl_arrow_keys PARAMS((int, int));
+
+extern int rl_previous_screen_line PARAMS((int, int));
+extern int rl_next_screen_line PARAMS((int, int));
+
+/* Bindable commands for inserting and deleting text. */
+extern int rl_insert PARAMS((int, int));
+extern int rl_quoted_insert PARAMS((int, int));
+extern int rl_tab_insert PARAMS((int, int));
+extern int rl_newline PARAMS((int, int));
+extern int rl_do_lowercase_version PARAMS((int, int));
+extern int rl_rubout PARAMS((int, int));
+extern int rl_delete PARAMS((int, int));
+extern int rl_rubout_or_delete PARAMS((int, int));
+extern int rl_delete_horizontal_space PARAMS((int, int));
+extern int rl_delete_or_show_completions PARAMS((int, int));
+extern int rl_insert_comment PARAMS((int, int));
+
+/* Bindable commands for changing case. */
+extern int rl_upcase_word PARAMS((int, int));
+extern int rl_downcase_word PARAMS((int, int));
+extern int rl_capitalize_word PARAMS((int, int));
+
+/* Bindable commands for transposing characters and words. */
+extern int rl_transpose_words PARAMS((int, int));
+extern int rl_transpose_chars PARAMS((int, int));
+
+/* Bindable commands for searching within a line. */
+extern int rl_char_search PARAMS((int, int));
+extern int rl_backward_char_search PARAMS((int, int));
+
+/* Bindable commands for readline's interface to the command history. */
+extern int rl_beginning_of_history PARAMS((int, int));
+extern int rl_end_of_history PARAMS((int, int));
+extern int rl_get_next_history PARAMS((int, int));
+extern int rl_get_previous_history PARAMS((int, int));
+extern int rl_operate_and_get_next PARAMS((int, int));
+
+/* Bindable commands for managing the mark and region. */
+extern int rl_set_mark PARAMS((int, int));
+extern int rl_exchange_point_and_mark PARAMS((int, int));
+
+/* Bindable commands to set the editing mode (emacs or vi). */
+extern int rl_vi_editing_mode PARAMS((int, int));
+extern int rl_emacs_editing_mode PARAMS((int, int));
+
+/* Bindable commands to change the insert mode (insert or overwrite) */
+extern int rl_overwrite_mode PARAMS((int, int));
+
+/* Bindable commands for managing key bindings. */
+extern int rl_re_read_init_file PARAMS((int, int));
+extern int rl_dump_functions PARAMS((int, int));
+extern int rl_dump_macros PARAMS((int, int));
+extern int rl_dump_variables PARAMS((int, int));
+
+/* Bindable commands for word completion. */
+extern int rl_complete PARAMS((int, int));
+extern int rl_possible_completions PARAMS((int, int));
+extern int rl_insert_completions PARAMS((int, int));
+extern int rl_old_menu_complete PARAMS((int, int));
+extern int rl_menu_complete PARAMS((int, int));
+extern int rl_backward_menu_complete PARAMS((int, int));
+
+/* Bindable commands for killing and yanking text, and managing the kill ring. */
+extern int rl_kill_word PARAMS((int, int));
+extern int rl_backward_kill_word PARAMS((int, int));
+extern int rl_kill_line PARAMS((int, int));
+extern int rl_backward_kill_line PARAMS((int, int));
+extern int rl_kill_full_line PARAMS((int, int));
+extern int rl_unix_word_rubout PARAMS((int, int));
+extern int rl_unix_filename_rubout PARAMS((int, int));
+extern int rl_unix_line_discard PARAMS((int, int));
+extern int rl_copy_region_to_kill PARAMS((int, int));
+extern int rl_kill_region PARAMS((int, int));
+extern int rl_copy_forward_word PARAMS((int, int));
+extern int rl_copy_backward_word PARAMS((int, int));
+extern int rl_yank PARAMS((int, int));
+extern int rl_yank_pop PARAMS((int, int));
+extern int rl_yank_nth_arg PARAMS((int, int));
+extern int rl_yank_last_arg PARAMS((int, int));
+extern int rl_bracketed_paste_begin PARAMS((int, int));
+/* Not available unless _WIN32 is defined. */
+#if defined (_WIN32)
+extern int rl_paste_from_clipboard PARAMS((int, int));
+#endif
+
+/* Bindable commands for incremental searching. */
+extern int rl_reverse_search_history PARAMS((int, int));
+extern int rl_forward_search_history PARAMS((int, int));
+
+/* Bindable keyboard macro commands. */
+extern int rl_start_kbd_macro PARAMS((int, int));
+extern int rl_end_kbd_macro PARAMS((int, int));
+extern int rl_call_last_kbd_macro PARAMS((int, int));
+extern int rl_print_last_kbd_macro PARAMS((int, int));
+
+/* Bindable undo commands. */
+extern int rl_revert_line PARAMS((int, int));
+extern int rl_undo_command PARAMS((int, int));
+
+/* Bindable tilde expansion commands. */
+extern int rl_tilde_expand PARAMS((int, int));
+
+/* Bindable terminal control commands. */
+extern int rl_restart_output PARAMS((int, int));
+extern int rl_stop_output PARAMS((int, int));
+
+/* Miscellaneous bindable commands. */
+extern int rl_abort PARAMS((int, int));
+extern int rl_tty_status PARAMS((int, int));
+
+/* Bindable commands for incremental and non-incremental history searching. */
+extern int rl_history_search_forward PARAMS((int, int));
+extern int rl_history_search_backward PARAMS((int, int));
+extern int rl_history_substr_search_forward PARAMS((int, int));
+extern int rl_history_substr_search_backward PARAMS((int, int));
+extern int rl_noninc_forward_search PARAMS((int, int));
+extern int rl_noninc_reverse_search PARAMS((int, int));
+extern int rl_noninc_forward_search_again PARAMS((int, int));
+extern int rl_noninc_reverse_search_again PARAMS((int, int));
+
+/* Bindable command used when inserting a matching close character. */
+extern int rl_insert_close PARAMS((int, int));
+
+/* Not available unless READLINE_CALLBACKS is defined. */
+extern void rl_callback_handler_install PARAMS((const char *, rl_vcpfunc_t *));
+extern void rl_callback_read_char PARAMS((void));
+extern void rl_callback_handler_remove PARAMS((void));
+extern void rl_callback_sigcleanup PARAMS((void));
+
+/* Things for vi mode. Not available unless readline is compiled -DVI_MODE. */
+/* VI-mode bindable commands. */
+extern int rl_vi_redo PARAMS((int, int));
+extern int rl_vi_undo PARAMS((int, int));
+extern int rl_vi_yank_arg PARAMS((int, int));
+extern int rl_vi_fetch_history PARAMS((int, int));
+extern int rl_vi_search_again PARAMS((int, int));
+extern int rl_vi_search PARAMS((int, int));
+extern int rl_vi_complete PARAMS((int, int));
+extern int rl_vi_tilde_expand PARAMS((int, int));
+extern int rl_vi_prev_word PARAMS((int, int));
+extern int rl_vi_next_word PARAMS((int, int));
+extern int rl_vi_end_word PARAMS((int, int));
+extern int rl_vi_insert_beg PARAMS((int, int));
+extern int rl_vi_append_mode PARAMS((int, int));
+extern int rl_vi_append_eol PARAMS((int, int));
+extern int rl_vi_eof_maybe PARAMS((int, int));
+extern int rl_vi_insertion_mode PARAMS((int, int));
+extern int rl_vi_insert_mode PARAMS((int, int));
+extern int rl_vi_movement_mode PARAMS((int, int));
+extern int rl_vi_arg_digit PARAMS((int, int));
+extern int rl_vi_change_case PARAMS((int, int));
+extern int rl_vi_put PARAMS((int, int));
+extern int rl_vi_column PARAMS((int, int));
+extern int rl_vi_delete_to PARAMS((int, int));
+extern int rl_vi_change_to PARAMS((int, int));
+extern int rl_vi_yank_to PARAMS((int, int));
+extern int rl_vi_yank_pop PARAMS((int, int));
+extern int rl_vi_rubout PARAMS((int, int));
+extern int rl_vi_delete PARAMS((int, int));
+extern int rl_vi_back_to_indent PARAMS((int, int));
+extern int rl_vi_unix_word_rubout PARAMS((int, int));
+extern int rl_vi_first_print PARAMS((int, int));
+extern int rl_vi_char_search PARAMS((int, int));
+extern int rl_vi_match PARAMS((int, int));
+extern int rl_vi_change_char PARAMS((int, int));
+extern int rl_vi_subst PARAMS((int, int));
+extern int rl_vi_overstrike PARAMS((int, int));
+extern int rl_vi_overstrike_delete PARAMS((int, int));
+extern int rl_vi_replace PARAMS((int, int));
+extern int rl_vi_set_mark PARAMS((int, int));
+extern int rl_vi_goto_mark PARAMS((int, int));
+
+/* VI-mode utility functions. */
+extern int rl_vi_check PARAMS((void));
+extern int rl_vi_domove PARAMS((int, int *));
+extern int rl_vi_bracktype PARAMS((int));
+
+extern void rl_vi_start_inserting PARAMS((int, int, int));
+
+/* VI-mode pseudo-bindable commands, used as utility functions. */
+extern int rl_vi_fWord PARAMS((int, int));
+extern int rl_vi_bWord PARAMS((int, int));
+extern int rl_vi_eWord PARAMS((int, int));
+extern int rl_vi_fword PARAMS((int, int));
+extern int rl_vi_bword PARAMS((int, int));
+extern int rl_vi_eword PARAMS((int, int));
+
+/* **************************************************************** */
+/*								    */
+/*			Well Published Functions		    */
+/*								    */
+/* **************************************************************** */
+
+/* Readline functions. */
+/* Read a line of input.  Prompt with PROMPT.  A NULL PROMPT means none. */
+extern char *readline PARAMS((const char *));
+
+extern int rl_set_prompt PARAMS((const char *));
+extern int rl_expand_prompt PARAMS((char *));
+
+extern int rl_initialize PARAMS((void));
+
+/* Undocumented; unused by readline */
+extern int rl_discard_argument PARAMS((void));
+
+/* Utility functions to bind keys to readline commands. */
+extern int rl_add_defun PARAMS((const char *, rl_command_func_t *, int));
+extern int rl_bind_key PARAMS((int, rl_command_func_t *));
+extern int rl_bind_key_in_map PARAMS((int, rl_command_func_t *, Keymap));
+extern int rl_unbind_key PARAMS((int));
+extern int rl_unbind_key_in_map PARAMS((int, Keymap));
+extern int rl_bind_key_if_unbound PARAMS((int, rl_command_func_t *));
+extern int rl_bind_key_if_unbound_in_map PARAMS((int, rl_command_func_t *, Keymap));
+extern int rl_unbind_function_in_map PARAMS((rl_command_func_t *, Keymap));
+extern int rl_unbind_command_in_map PARAMS((const char *, Keymap));
+extern int rl_bind_keyseq PARAMS((const char *, rl_command_func_t *));
+extern int rl_bind_keyseq_in_map PARAMS((const char *, rl_command_func_t *, Keymap));
+extern int rl_bind_keyseq_if_unbound PARAMS((const char *, rl_command_func_t *));
+extern int rl_bind_keyseq_if_unbound_in_map PARAMS((const char *, rl_command_func_t *, Keymap));
+extern int rl_generic_bind PARAMS((int, const char *, char *, Keymap));
+
+extern char *rl_variable_value PARAMS((const char *));
+extern int rl_variable_bind PARAMS((const char *, const char *));
+
+/* Backwards compatibility, use rl_bind_keyseq_in_map instead. */
+extern int rl_set_key PARAMS((const char *, rl_command_func_t *, Keymap));
+
+/* Backwards compatibility, use rl_generic_bind instead. */
+extern int rl_macro_bind PARAMS((const char *, const char *, Keymap));
+
+/* Undocumented in the texinfo manual; not really useful to programs. */
+extern int rl_translate_keyseq PARAMS((const char *, char *, int *));
+extern char *rl_untranslate_keyseq PARAMS((int));
+
+extern rl_command_func_t *rl_named_function PARAMS((const char *));
+extern rl_command_func_t *rl_function_of_keyseq PARAMS((const char *, Keymap, int *));
+extern rl_command_func_t *rl_function_of_keyseq_len PARAMS((const char *, size_t, Keymap, int *));
+
+extern void rl_list_funmap_names PARAMS((void));
+extern char **rl_invoking_keyseqs_in_map PARAMS((rl_command_func_t *, Keymap));
+extern char **rl_invoking_keyseqs PARAMS((rl_command_func_t *));
+ 
+extern void rl_function_dumper PARAMS((int));
+extern void rl_macro_dumper PARAMS((int));
+extern void rl_variable_dumper PARAMS((int));
+
+extern int rl_read_init_file PARAMS((const char *));
+extern int rl_parse_and_bind PARAMS((char *));
+
+/* Functions for manipulating keymaps. */
+extern Keymap rl_make_bare_keymap PARAMS((void));
+extern int rl_empty_keymap PARAMS((Keymap));
+extern Keymap rl_copy_keymap PARAMS((Keymap));
+extern Keymap rl_make_keymap PARAMS((void));
+extern void rl_discard_keymap PARAMS((Keymap));
+extern void rl_free_keymap PARAMS((Keymap));
+
+extern Keymap rl_get_keymap_by_name PARAMS((const char *));
+extern char *rl_get_keymap_name PARAMS((Keymap));
+extern void rl_set_keymap PARAMS((Keymap));
+extern Keymap rl_get_keymap PARAMS((void));
+
+extern int rl_set_keymap_name PARAMS((const char *, Keymap));
+
+/* Undocumented; used internally only. */
+extern void rl_set_keymap_from_edit_mode PARAMS((void));
+extern char *rl_get_keymap_name_from_edit_mode PARAMS((void));
+
+/* Functions for manipulating the funmap, which maps command names to functions. */
+extern int rl_add_funmap_entry PARAMS((const char *, rl_command_func_t *));
+extern const char **rl_funmap_names PARAMS((void));
+/* Undocumented, only used internally -- there is only one funmap, and this
+   function may be called only once. */
+extern void rl_initialize_funmap PARAMS((void));
+
+/* Utility functions for managing keyboard macros. */
+extern void rl_push_macro_input PARAMS((char *));
+
+/* Functions for undoing, from undo.c */
+extern void rl_add_undo PARAMS((enum undo_code, int, int, char *));
+extern void rl_free_undo_list PARAMS((void));
+extern int rl_do_undo PARAMS((void));
+extern int rl_begin_undo_group PARAMS((void));
+extern int rl_end_undo_group PARAMS((void));
+extern int rl_modifying PARAMS((int, int));
+
+/* Functions for redisplay. */
+extern void rl_redisplay PARAMS((void));
+extern int rl_on_new_line PARAMS((void));
+extern int rl_on_new_line_with_prompt PARAMS((void));
+extern int rl_forced_update_display PARAMS((void));
+extern int rl_clear_visible_line PARAMS((void));
+extern int rl_clear_message PARAMS((void));
+extern int rl_reset_line_state PARAMS((void));
+extern int rl_crlf PARAMS((void));
+
+/* Functions to manage the mark and region, especially the notion of an
+   active mark and an active region. */
+extern void rl_keep_mark_active PARAMS((void));
+
+extern void rl_activate_mark PARAMS((void));
+extern void rl_deactivate_mark PARAMS((void));
+extern int rl_mark_active_p PARAMS((void));
+
+#if defined (USE_VARARGS) && defined (PREFER_STDARG)
+extern int rl_message (const char *, ...)  __attribute__((__format__ (printf, 1, 2)));
+#else
+extern int rl_message ();
+#endif
+
+extern int rl_show_char PARAMS((int));
+
+/* Undocumented in texinfo manual. */
+extern int rl_character_len PARAMS((int, int));
+extern void rl_redraw_prompt_last_line PARAMS((void));
+
+/* Save and restore internal prompt redisplay information. */
+extern void rl_save_prompt PARAMS((void));
+extern void rl_restore_prompt PARAMS((void));
+
+/* Modifying text. */
+extern void rl_replace_line PARAMS((const char *, int));
+extern int rl_insert_text PARAMS((const char *));
+extern int rl_delete_text PARAMS((int, int));
+extern int rl_kill_text PARAMS((int, int));
+extern char *rl_copy_text PARAMS((int, int));
+
+/* Terminal and tty mode management. */
+extern void rl_prep_terminal PARAMS((int));
+extern void rl_deprep_terminal PARAMS((void));
+extern void rl_tty_set_default_bindings PARAMS((Keymap));
+extern void rl_tty_unset_default_bindings PARAMS((Keymap));
+
+extern int rl_tty_set_echoing PARAMS((int));
+extern int rl_reset_terminal PARAMS((const char *));
+extern void rl_resize_terminal PARAMS((void));
+extern void rl_set_screen_size PARAMS((int, int));
+extern void rl_get_screen_size PARAMS((int *, int *));
+extern void rl_reset_screen_size PARAMS((void));
+
+extern char *rl_get_termcap PARAMS((const char *));
+
+/* Functions for character input. */
+extern int rl_stuff_char PARAMS((int));
+extern int rl_execute_next PARAMS((int));
+extern int rl_clear_pending_input PARAMS((void));
+extern int rl_read_key PARAMS((void));
+extern int rl_getc PARAMS((FILE *));
+extern int rl_set_keyboard_input_timeout PARAMS((int));
+
+/* `Public' utility functions . */
+extern void rl_extend_line_buffer PARAMS((int));
+extern int rl_ding PARAMS((void));
+extern int rl_alphabetic PARAMS((int));
+extern void rl_free PARAMS((void *));
+
+/* Readline signal handling, from signals.c */
+extern int rl_set_signals PARAMS((void));
+extern int rl_clear_signals PARAMS((void));
+extern void rl_cleanup_after_signal PARAMS((void));
+extern void rl_reset_after_signal PARAMS((void));
+extern void rl_free_line_state PARAMS((void));
+
+extern int rl_pending_signal PARAMS((void));
+extern void rl_check_signals PARAMS((void));
+
+extern void rl_echo_signal_char PARAMS((int)); 
+
+extern int rl_set_paren_blink_timeout PARAMS((int));
+
+/* History management functions. */
+
+extern void rl_clear_history PARAMS((void));
+
+/* Undocumented. */
+extern int rl_maybe_save_line PARAMS((void));
+extern int rl_maybe_unsave_line PARAMS((void));
+extern int rl_maybe_replace_line PARAMS((void));
+
+/* Completion functions. */
+extern int rl_complete_internal PARAMS((int));
+extern void rl_display_match_list PARAMS((char **, int, int));
+
+extern char **rl_completion_matches PARAMS((const char *, rl_compentry_func_t *));
+extern char *rl_username_completion_function PARAMS((const char *, int));
+extern char *rl_filename_completion_function PARAMS((const char *, int));
+
+extern int rl_completion_mode PARAMS((rl_command_func_t *));
+
+#if 0
+/* Backwards compatibility (compat.c).  These will go away sometime. */
+extern void free_undo_list PARAMS((void));
+extern int maybe_save_line PARAMS((void));
+extern int maybe_unsave_line PARAMS((void));
+extern int maybe_replace_line PARAMS((void));
+
+extern int ding PARAMS((void));
+extern int alphabetic PARAMS((int));
+extern int crlf PARAMS((void));
+
+extern char **completion_matches PARAMS((char *, rl_compentry_func_t *));
+extern char *username_completion_function PARAMS((const char *, int));
+extern char *filename_completion_function PARAMS((const char *, int));
+#endif
+
+/* **************************************************************** */
+/*								    */
+/*			Well Published Variables		    */
+/*								    */
+/* **************************************************************** */
+
+/* The version of this incarnation of the readline library. */
+extern const char *rl_library_version;		/* e.g., "4.2" */
+extern int rl_readline_version;			/* e.g., 0x0402 */
+
+/* True if this is real GNU readline. */
+extern int rl_gnu_readline_p;
+
+/* Flags word encapsulating the current readline state. */
+extern unsigned long rl_readline_state;
+
+/* Says which editing mode readline is currently using.  1 means emacs mode;
+   0 means vi mode. */
+extern int rl_editing_mode;
+
+/* Insert or overwrite mode for emacs mode.  1 means insert mode; 0 means
+   overwrite mode.  Reset to insert mode on each input line. */
+extern int rl_insert_mode;
+
+/* The name of the calling program.  You should initialize this to
+   whatever was in argv[0].  It is used when parsing conditionals. */
+extern const char *rl_readline_name;
+
+/* The prompt readline uses.  This is set from the argument to
+   readline (), and should not be assigned to directly. */
+extern char *rl_prompt;
+
+/* The prompt string that is actually displayed by rl_redisplay.  Public so
+   applications can more easily supply their own redisplay functions. */
+extern char *rl_display_prompt;
+
+/* The line buffer that is in use. */
+extern char *rl_line_buffer;
+
+/* The location of point, and end. */
+extern int rl_point;
+extern int rl_end;
+
+/* The mark, or saved cursor position. */
+extern int rl_mark;
+
+/* Flag to indicate that readline has finished with the current input
+   line and should return it. */
+extern int rl_done;
+
+/* If set to a character value, that will be the next keystroke read. */
+extern int rl_pending_input;
+
+/* Non-zero if we called this function from _rl_dispatch().  It's present
+   so functions can find out whether they were called from a key binding
+   or directly from an application. */
+extern int rl_dispatching;
+
+/* Non-zero if the user typed a numeric argument before executing the
+   current function. */
+extern int rl_explicit_arg;
+
+/* The current value of the numeric argument specified by the user. */
+extern int rl_numeric_arg;
+
+/* The address of the last command function Readline executed. */
+extern rl_command_func_t *rl_last_func;
+
+/* The name of the terminal to use. */
+extern const char *rl_terminal_name;
+
+/* The input and output streams. */
+extern FILE *rl_instream;
+extern FILE *rl_outstream;
+
+/* If non-zero, Readline gives values of LINES and COLUMNS from the environment
+   greater precedence than values fetched from the kernel when computing the
+   screen dimensions. */
+extern int rl_prefer_env_winsize;
+
+/* If non-zero, then this is the address of a function to call just
+   before readline_internal () prints the first prompt. */
+extern rl_hook_func_t *rl_startup_hook;
+
+/* If non-zero, this is the address of a function to call just before
+   readline_internal_setup () returns and readline_internal starts
+   reading input characters. */
+extern rl_hook_func_t *rl_pre_input_hook;
+      
+/* The address of a function to call periodically while Readline is
+   awaiting character input, or NULL, for no event handling. */
+extern rl_hook_func_t *rl_event_hook;
+
+/* The address of a function to call if a read is interrupted by a signal. */
+extern rl_hook_func_t *rl_signal_event_hook;
+
+/* The address of a function to call if Readline needs to know whether or not
+   there is data available from the current input source. */
+extern rl_hook_func_t *rl_input_available_hook;
+
+/* The address of the function to call to fetch a character from the current
+   Readline input stream */
+extern rl_getc_func_t *rl_getc_function;
+
+extern rl_voidfunc_t *rl_redisplay_function;
+
+extern rl_vintfunc_t *rl_prep_term_function;
+extern rl_voidfunc_t *rl_deprep_term_function;
+
+/* Dispatch variables. */
+extern Keymap rl_executing_keymap;
+extern Keymap rl_binding_keymap;
+
+extern int rl_executing_key;
+extern char *rl_executing_keyseq;
+extern int rl_key_sequence_length;
+
+/* Display variables. */
+/* If non-zero, readline will erase the entire line, including any prompt,
+   if the only thing typed on an otherwise-blank line is something bound to
+   rl_newline. */
+extern int rl_erase_empty_line;
+
+/* If non-zero, the application has already printed the prompt (rl_prompt)
+   before calling readline, so readline should not output it the first time
+   redisplay is done. */
+extern int rl_already_prompted;
+
+/* A non-zero value means to read only this many characters rather than
+   up to a character bound to accept-line. */
+extern int rl_num_chars_to_read;
+
+/* The text of a currently-executing keyboard macro. */
+extern char *rl_executing_macro;
+
+/* Variables to control readline signal handling. */
+/* If non-zero, readline will install its own signal handlers for
+   SIGINT, SIGTERM, SIGQUIT, SIGALRM, SIGTSTP, SIGTTIN, and SIGTTOU. */
+extern int rl_catch_signals;
+
+/* If non-zero, readline will install a signal handler for SIGWINCH
+   that also attempts to call any calling application's SIGWINCH signal
+   handler.  Note that the terminal is not cleaned up before the
+   application's signal handler is called; use rl_cleanup_after_signal()
+   to do that. */
+extern int rl_catch_sigwinch;
+
+/* If non-zero, the readline SIGWINCH handler will modify LINES and
+   COLUMNS in the environment. */
+extern int rl_change_environment;
+
+/* Completion variables. */
+/* Pointer to the generator function for completion_matches ().
+   NULL means to use rl_filename_completion_function (), the default
+   filename completer. */
+extern rl_compentry_func_t *rl_completion_entry_function;
+
+/* Optional generator for menu completion.  Default is
+   rl_completion_entry_function (rl_filename_completion_function). */
+extern rl_compentry_func_t *rl_menu_completion_entry_function;
+
+/* If rl_ignore_some_completions_function is non-NULL it is the address
+   of a function to call after all of the possible matches have been
+   generated, but before the actual completion is done to the input line.
+   The function is called with one argument; a NULL terminated array
+   of (char *).  If your function removes any of the elements, they
+   must be free()'ed. */
+extern rl_compignore_func_t *rl_ignore_some_completions_function;
+
+/* Pointer to alternative function to create matches.
+   Function is called with TEXT, START, and END.
+   START and END are indices in RL_LINE_BUFFER saying what the boundaries
+   of TEXT are.
+   If this function exists and returns NULL then call the value of
+   rl_completion_entry_function to try to match, otherwise use the
+   array of strings returned. */
+extern rl_completion_func_t *rl_attempted_completion_function;
+
+/* The basic list of characters that signal a break between words for the
+   completer routine.  The initial contents of this variable is what
+   breaks words in the shell, i.e. "n\"\\'`@$>". */
+extern const char *rl_basic_word_break_characters;
+
+/* The list of characters that signal a break between words for
+   rl_complete_internal.  The default list is the contents of
+   rl_basic_word_break_characters.  */
+extern /*const*/ char *rl_completer_word_break_characters;
+
+/* Hook function to allow an application to set the completion word
+   break characters before readline breaks up the line.  Allows
+   position-dependent word break characters. */
+extern rl_cpvfunc_t *rl_completion_word_break_hook;
+
+/* List of characters which can be used to quote a substring of the line.
+   Completion occurs on the entire substring, and within the substring   
+   rl_completer_word_break_characters are treated as any other character,
+   unless they also appear within this list. */
+extern const char *rl_completer_quote_characters;
+
+/* List of quote characters which cause a word break. */
+extern const char *rl_basic_quote_characters;
+
+/* List of characters that need to be quoted in filenames by the completer. */
+extern const char *rl_filename_quote_characters;
+
+/* List of characters that are word break characters, but should be left
+   in TEXT when it is passed to the completion function.  The shell uses
+   this to help determine what kind of completing to do. */
+extern const char *rl_special_prefixes;
+
+/* If non-zero, then this is the address of a function to call when
+   completing on a directory name.  The function is called with
+   the address of a string (the current directory name) as an arg.  It
+   changes what is displayed when the possible completions are printed
+   or inserted.  The directory completion hook should perform
+   any necessary dequoting.  This function should return 1 if it modifies
+   the directory name pointer passed as an argument.  If the directory
+   completion hook returns 0, it should not modify the directory name
+   pointer passed as an argument. */
+extern rl_icppfunc_t *rl_directory_completion_hook;
+
+/* If non-zero, this is the address of a function to call when completing
+   a directory name.  This function takes the address of the directory name
+   to be modified as an argument.  Unlike rl_directory_completion_hook, it
+   only modifies the directory name used in opendir(2), not what is displayed
+   when the possible completions are printed or inserted.  If set, it takes
+   precedence over rl_directory_completion_hook.  The directory rewrite
+   hook should perform any necessary dequoting.  This function has the same
+   return value properties as the directory_completion_hook.
+
+   I'm not happy with how this works yet, so it's undocumented.  I'm trying
+   it in bash to see how well it goes. */
+extern rl_icppfunc_t *rl_directory_rewrite_hook;
+
+/* If non-zero, this is the address of a function for the completer to call
+   before deciding which character to append to a completed name.  It should
+   modify the directory name passed as an argument if appropriate, and return
+   non-zero if it modifies the name.  This should not worry about dequoting
+   the filename; that has already happened by the time it gets here. */
+extern rl_icppfunc_t *rl_filename_stat_hook;
+
+/* If non-zero, this is the address of a function to call when reading
+   directory entries from the filesystem for completion and comparing
+   them to the partial word to be completed.  The function should
+   either return its first argument (if no conversion takes place) or
+   newly-allocated memory.  This can, for instance, convert filenames
+   between character sets for comparison against what's typed at the
+   keyboard.  The returned value is what is added to the list of
+   matches.  The second argument is the length of the filename to be
+   converted. */
+extern rl_dequote_func_t *rl_filename_rewrite_hook;
+
+/* Backwards compatibility with previous versions of readline. */
+#define rl_symbolic_link_hook rl_directory_completion_hook
+
+/* If non-zero, then this is the address of a function to call when
+   completing a word would normally display the list of possible matches.
+   This function is called instead of actually doing the display.
+   It takes three arguments: (char **matches, int num_matches, int max_length)
+   where MATCHES is the array of strings that matched, NUM_MATCHES is the
+   number of strings in that array, and MAX_LENGTH is the length of the
+   longest string in that array. */
+extern rl_compdisp_func_t *rl_completion_display_matches_hook;
+
+/* Non-zero means that the results of the matches are to be treated
+   as filenames.  This is ALWAYS zero on entry, and can only be changed
+   within a completion entry finder function. */
+extern int rl_filename_completion_desired;
+
+/* Non-zero means that the results of the matches are to be quoted using
+   double quotes (or an application-specific quoting mechanism) if the
+   filename contains any characters in rl_word_break_chars.  This is
+   ALWAYS non-zero on entry, and can only be changed within a completion
+   entry finder function. */
+extern int rl_filename_quoting_desired;
+
+/* Set to a function to quote a filename in an application-specific fashion.
+   Called with the text to quote, the type of match found (single or multiple)
+   and a pointer to the quoting character to be used, which the function can
+   reset if desired. */
+extern rl_quote_func_t *rl_filename_quoting_function;
+
+/* Function to call to remove quoting characters from a filename.  Called
+   before completion is attempted, so the embedded quotes do not interfere
+   with matching names in the file system. */
+extern rl_dequote_func_t *rl_filename_dequoting_function;
+
+/* Function to call to decide whether or not a word break character is
+   quoted.  If a character is quoted, it does not break words for the
+   completer. */
+extern rl_linebuf_func_t *rl_char_is_quoted_p;
+
+/* Non-zero means to suppress normal filename completion after the
+   user-specified completion function has been called. */
+extern int rl_attempted_completion_over;
+
+/* Set to a character describing the type of completion being attempted by
+   rl_complete_internal; available for use by application completion
+   functions. */
+extern int rl_completion_type;
+
+/* Set to the last key used to invoke one of the completion functions */
+extern int rl_completion_invoking_key;
+
+/* Up to this many items will be displayed in response to a
+   possible-completions call.  After that, we ask the user if she
+   is sure she wants to see them all.  The default value is 100. */
+extern int rl_completion_query_items;
+
+/* Character appended to completed words when at the end of the line.  The
+   default is a space.  Nothing is added if this is '\0'. */
+extern int rl_completion_append_character;
+
+/* If set to non-zero by an application completion function,
+   rl_completion_append_character will not be appended. */
+extern int rl_completion_suppress_append;
+
+/* Set to any quote character readline thinks it finds before any application
+   completion function is called. */
+extern int rl_completion_quote_character;
+
+/* Set to a non-zero value if readline found quoting anywhere in the word to
+   be completed; set before any application completion function is called. */
+extern int rl_completion_found_quote;
+
+/* If non-zero, the completion functions don't append any closing quote.
+   This is set to 0 by rl_complete_internal and may be changed by an
+   application-specific completion function. */
+extern int rl_completion_suppress_quote;
+
+/* If non-zero, readline will sort the completion matches.  On by default. */
+extern int rl_sort_completion_matches;
+
+/* If non-zero, a slash will be appended to completed filenames that are
+   symbolic links to directory names, subject to the value of the
+   mark-directories variable (which is user-settable).  This exists so
+   that application completion functions can override the user's preference
+   (set via the mark-symlinked-directories variable) if appropriate.
+   It's set to the value of _rl_complete_mark_symlink_dirs in
+   rl_complete_internal before any application-specific completion
+   function is called, so without that function doing anything, the user's
+   preferences are honored. */
+extern int rl_completion_mark_symlink_dirs;
+
+/* If non-zero, then disallow duplicates in the matches. */
+extern int rl_ignore_completion_duplicates;
+
+/* If this is non-zero, completion is (temporarily) inhibited, and the
+   completion character will be inserted as any other. */
+extern int rl_inhibit_completion;
+
+/* Applications can set this to non-zero to have readline's signal handlers
+   installed during the entire duration of reading a complete line, as in
+   readline-6.2.  This should be used with care, because it can result in
+   readline receiving signals and not handling them until it's called again
+   via rl_callback_read_char, thereby stealing them from the application.
+   By default, signal handlers are only active while readline is active. */   
+extern int rl_persistent_signal_handlers;
+
+/* Input error; can be returned by (*rl_getc_function) if readline is reading
+   a top-level command (RL_ISSTATE (RL_STATE_READCMD)). */
+#define READERR			(-2)
+
+/* Definitions available for use by readline clients. */
+#define RL_PROMPT_START_IGNORE	'\001'
+#define RL_PROMPT_END_IGNORE	'\002'
+
+/* Possible values for do_replace argument to rl_filename_quoting_function,
+   called by rl_complete_internal. */
+#define NO_MATCH        0
+#define SINGLE_MATCH    1
+#define MULT_MATCH      2
+
+/* Possible state values for rl_readline_state */
+#define RL_STATE_NONE		0x000000		/* no state; before first call */
+
+#define RL_STATE_INITIALIZING	0x0000001	/* initializing */
+#define RL_STATE_INITIALIZED	0x0000002	/* initialization done */
+#define RL_STATE_TERMPREPPED	0x0000004	/* terminal is prepped */
+#define RL_STATE_READCMD	0x0000008	/* reading a command key */
+#define RL_STATE_METANEXT	0x0000010	/* reading input after ESC */
+#define RL_STATE_DISPATCHING	0x0000020	/* dispatching to a command */
+#define RL_STATE_MOREINPUT	0x0000040	/* reading more input in a command function */
+#define RL_STATE_ISEARCH	0x0000080	/* doing incremental search */
+#define RL_STATE_NSEARCH	0x0000100	/* doing non-inc search */
+#define RL_STATE_SEARCH		0x0000200	/* doing a history search */
+#define RL_STATE_NUMERICARG	0x0000400	/* reading numeric argument */
+#define RL_STATE_MACROINPUT	0x0000800	/* getting input from a macro */
+#define RL_STATE_MACRODEF	0x0001000	/* defining keyboard macro */
+#define RL_STATE_OVERWRITE	0x0002000	/* overwrite mode */
+#define RL_STATE_COMPLETING	0x0004000	/* doing completion */
+#define RL_STATE_SIGHANDLER	0x0008000	/* in readline sighandler */
+#define RL_STATE_UNDOING	0x0010000	/* doing an undo */
+#define RL_STATE_INPUTPENDING	0x0020000	/* rl_execute_next called */
+#define RL_STATE_TTYCSAVED	0x0040000	/* tty special chars saved */
+#define RL_STATE_CALLBACK	0x0080000	/* using the callback interface */
+#define RL_STATE_VIMOTION	0x0100000	/* reading vi motion arg */
+#define RL_STATE_MULTIKEY	0x0200000	/* reading multiple-key command */
+#define RL_STATE_VICMDONCE	0x0400000	/* entered vi command mode at least once */
+#define RL_STATE_CHARSEARCH	0x0800000	/* vi mode char search */
+#define RL_STATE_REDISPLAYING	0x1000000	/* updating terminal display */
+
+#define RL_STATE_DONE		0x2000000	/* done; accepted line */
+
+#define RL_SETSTATE(x)		(rl_readline_state |= (x))
+#define RL_UNSETSTATE(x)	(rl_readline_state &= ~(x))
+#define RL_ISSTATE(x)		(rl_readline_state & (x))
+
+struct readline_state {
+  /* line state */
+  int point;
+  int end;
+  int mark;
+  int buflen;
+  char *buffer;
+  UNDO_LIST *ul;
+  char *prompt;
+
+  /* global state */
+  int rlstate;
+  int done;
+  Keymap kmap;
+
+  /* input state */
+  rl_command_func_t *lastfunc;
+  int insmode;
+  int edmode;
+  char *kseq;
+  int kseqlen;
+
+  int pendingin;
+  FILE *inf;
+  FILE *outf;
+  char *macro;
+
+  /* signal state */
+  int catchsigs;
+  int catchsigwinch;
+
+  /* search state */
+
+  /* completion state */
+  rl_compentry_func_t *entryfunc;
+  rl_compentry_func_t *menuentryfunc;
+  rl_compignore_func_t *ignorefunc;
+  rl_completion_func_t *attemptfunc;
+  char *wordbreakchars;
+
+  /* options state */
+
+  /* hook state */
+  
+  /* reserved for future expansion, so the struct size doesn't change */
+  char reserved[64];
+};
+
+extern int rl_save_state PARAMS((struct readline_state *));
+extern int rl_restore_state PARAMS((struct readline_state *));
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _READLINE_H_ */
diff --git a/lib/readline/rlconf.h b/lib/readline/rlconf.h
new file mode 100644
index 0000000..b6d6a2f
--- /dev/null
+++ b/lib/readline/rlconf.h
@@ -0,0 +1,79 @@
+/* rlconf.h -- readline configuration definitions */
+
+/* Copyright (C) 1992-2015 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_RLCONF_H_)
+#define _RLCONF_H_
+
+/* Define this if you want the vi-mode editing available. */
+#define VI_MODE
+
+/* Define this to get an indication of file type when listing completions. */
+#define VISIBLE_STATS
+
+/* Define this to get support for colors when listing completions and in
+   other places. */
+#define COLOR_SUPPORT
+
+/* This definition is needed by readline.c, rltty.c, and signals.c. */
+/* If on, then readline handles signals in a way that doesn't suck. */
+#define HANDLE_SIGNALS
+
+/* Ugly but working hack for binding prefix meta. */
+#define PREFIX_META_HACK
+
+/* The next-to-last-ditch effort file name for a user-specific init file. */
+#define DEFAULT_INPUTRC "~/.inputrc"
+
+/* The ultimate last-ditch filename for an init file -- system-wide. */
+#define SYS_INPUTRC "/etc/inputrc"
+
+/* If defined, expand tabs to spaces. */
+#define DISPLAY_TABS
+
+/* If defined, use the terminal escape sequence to move the cursor forward
+   over a character when updating the line rather than rewriting it. */
+/* #define HACK_TERMCAP_MOTION */
+
+/* The string inserted by the `insert comment' command. */
+#define RL_COMMENT_BEGIN_DEFAULT "#"
+
+/* Define this if you want code that allows readline to be used in an
+   X `callback' style. */
+#define READLINE_CALLBACKS
+
+/* Define this if you want the cursor to indicate insert or overwrite mode. */
+/* #define CURSOR_MODE */
+
+/* Define this if you want to enable code that talks to the Linux kernel
+   tty auditing system. */
+/* #define ENABLE_TTY_AUDIT_SUPPORT */
+
+/* Defaults for the various editing mode indicators, inserted at the beginning
+   of the last (maybe only) line of the prompt if show-mode-in-prompt is on */
+#define RL_EMACS_MODESTR_DEFAULT	"@"
+#define RL_EMACS_MODESTR_DEFLEN		1
+
+#define RL_VI_INS_MODESTR_DEFAULT	"(ins)"
+#define RL_VI_INS_MODESTR_DEFLEN	5
+#define RL_VI_CMD_MODESTR_DEFAULT	"(cmd)"
+#define RL_VI_CMD_MODESTR_DEFLEN	5
+
+#endif /* _RLCONF_H_ */
diff --git a/lib/readline/rldefs.h b/lib/readline/rldefs.h
new file mode 100644
index 0000000..dab1beb
--- /dev/null
+++ b/lib/readline/rldefs.h
@@ -0,0 +1,166 @@
+/* rldefs.h -- an attempt to isolate some of the system-specific defines
+   for readline.  This should be included after any files that define
+   system-specific constants like _POSIX_VERSION or USG. */
+
+/* Copyright (C) 1987-2011 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_RLDEFS_H_)
+#define _RLDEFS_H_
+
+#if defined (HAVE_CONFIG_H)
+#  include "config.h"
+#endif
+
+#include "rlstdc.h"
+
+#if defined (STRCOLL_BROKEN)
+#  undef HAVE_STRCOLL
+#endif
+
+#if defined (_POSIX_VERSION) && !defined (TERMIOS_MISSING)
+#  define TERMIOS_TTY_DRIVER
+#else
+#  if defined (HAVE_TERMIO_H)
+#    define TERMIO_TTY_DRIVER
+#  else
+#    if !defined (__MINGW32__)
+#      define NEW_TTY_DRIVER
+#    else
+#      define NO_TTY_DRIVER
+#    endif
+#  endif
+#endif
+
+/* Posix macro to check file in statbuf for directory-ness.
+   This requires that <sys/stat.h> be included before this test. */
+#if defined (S_IFDIR) && !defined (S_ISDIR)
+#  define S_ISDIR(m) (((m)&S_IFMT) == S_IFDIR)
+#endif
+
+/* Decide which flavor of the header file describing the C library
+   string functions to include and include it. */
+
+#if defined (HAVE_STRING_H)
+#  include <string.h>
+#else /* !HAVE_STRING_H */
+#  include <strings.h>
+#endif /* !HAVE_STRING_H */
+
+#if !defined (strchr) && !defined (__STDC__)
+extern char *strchr (), *strrchr ();
+#endif /* !strchr && !__STDC__ */
+
+#if defined (PREFER_STDARG)
+#  include <stdarg.h>
+#else
+#  if defined (PREFER_VARARGS)
+#    include <varargs.h>
+#  endif
+#endif
+
+#if defined (HAVE_STRCASECMP)
+#define _rl_stricmp strcasecmp
+#define _rl_strnicmp strncasecmp
+#else
+extern int _rl_stricmp PARAMS((const char *, const char *));
+extern int _rl_strnicmp PARAMS((const char *, const char *, int));
+#endif
+
+#if defined (HAVE_STRPBRK) && !defined (HAVE_MULTIBYTE)
+#  define _rl_strpbrk(a,b)	strpbrk((a),(b))
+#else
+extern char *_rl_strpbrk PARAMS((const char *, const char *));
+#endif
+
+#if !defined (emacs_mode)
+#  define no_mode -1
+#  define vi_mode 0
+#  define emacs_mode 1
+#endif
+
+#if !defined (RL_IM_INSERT)
+#  define RL_IM_INSERT		1
+#  define RL_IM_OVERWRITE	0
+#
+#  define RL_IM_DEFAULT		RL_IM_INSERT
+#endif
+
+/* If you cast map[key].function to type (Keymap) on a Cray,
+   the compiler takes the value of map[key].function and
+   divides it by 4 to convert between pointer types (pointers
+   to functions and pointers to structs are different sizes).
+   This is not what is wanted. */
+#if defined (CRAY)
+#  define FUNCTION_TO_KEYMAP(map, key)	(Keymap)((int)map[key].function)
+#  define KEYMAP_TO_FUNCTION(data)	(rl_command_func_t *)((int)(data))
+#else
+#  define FUNCTION_TO_KEYMAP(map, key)	(Keymap)(map[key].function)
+#  define KEYMAP_TO_FUNCTION(data)	(rl_command_func_t *)(data)
+#endif
+
+#ifndef savestring
+#define savestring(x) strcpy ((char *)xmalloc (1 + strlen (x)), (x))
+#endif
+
+/* Possible values for _rl_bell_preference. */
+#define NO_BELL 0
+#define AUDIBLE_BELL 1
+#define VISIBLE_BELL 2
+
+/* Definitions used when searching the line for characters. */
+/* NOTE: it is necessary that opposite directions are inverses */
+#define	FTO	 1		/* forward to */
+#define BTO	-1		/* backward to */
+#define FFIND	 2		/* forward find */
+#define BFIND	-2		/* backward find */
+
+/* Possible values for the found_quote flags word used by the completion
+   functions.  It says what kind of (shell-like) quoting we found anywhere
+   in the line. */
+#define RL_QF_SINGLE_QUOTE	0x01
+#define RL_QF_DOUBLE_QUOTE	0x02
+#define RL_QF_BACKSLASH		0x04
+#define RL_QF_OTHER_QUOTE	0x08
+
+/* Default readline line buffer length. */
+#define DEFAULT_BUFFER_SIZE 256
+
+#if !defined (STREQ)
+#define STREQ(a, b)	(((a)[0] == (b)[0]) && (strcmp ((a), (b)) == 0))
+#define STREQN(a, b, n)	(((n) == 0) ? (1) \
+				    : ((a)[0] == (b)[0]) && (strncmp ((a), (b), (n)) == 0))
+#endif
+
+#if !defined (RL_STRLEN)
+#  define RL_STRLEN(s) (((s) && (s)[0]) ? ((s)[1] ? ((s)[2] ? strlen(s) : 2) : 1) : 0)
+#endif
+
+#if !defined (FREE)
+#  define FREE(x)	if (x) free (x)
+#endif
+
+#if !defined (SWAP)
+#  define SWAP(s, e)  do { int t; t = s; s = e; e = t; } while (0)
+#endif
+
+/* CONFIGURATION SECTION */
+#include "rlconf.h"
+
+#endif /* !_RLDEFS_H_ */
diff --git a/lib/readline/rlmbutil.h b/lib/readline/rlmbutil.h
new file mode 100644
index 0000000..4d3e907
--- /dev/null
+++ b/lib/readline/rlmbutil.h
@@ -0,0 +1,213 @@
+/* rlmbutil.h -- utility functions for multibyte characters. */
+
+/* Copyright (C) 2001-2015 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_RL_MBUTIL_H_)
+#define _RL_MBUTIL_H_
+
+#include "rlstdc.h"
+
+/************************************************/
+/* check multibyte capability for I18N code     */
+/************************************************/
+
+/* For platforms which support the ISO C amendment 1 functionality we
+   support user defined character classes.  */
+   /* Solaris 2.5 has a bug: <wchar.h> must be included before <wctype.h>.  */
+#if defined (HAVE_WCTYPE_H) && defined (HAVE_WCHAR_H) && defined (HAVE_LOCALE_H)
+#  include <wchar.h>
+#  include <wctype.h>
+#  if defined (HAVE_ISWCTYPE) && \
+      defined (HAVE_ISWLOWER) && \
+      defined (HAVE_ISWUPPER) && \
+      defined (HAVE_MBSRTOWCS) && \
+      defined (HAVE_MBRTOWC) && \
+      defined (HAVE_MBRLEN) && \
+      defined (HAVE_TOWLOWER) && \
+      defined (HAVE_TOWUPPER) && \
+      defined (HAVE_WCHAR_T) && \
+      defined (HAVE_WCWIDTH)
+     /* system is supposed to support XPG5 */
+#    define HANDLE_MULTIBYTE      1
+#  endif
+#endif
+
+/* If we don't want multibyte chars even on a system that supports them, let
+   the configuring user turn multibyte support off. */
+#if defined (NO_MULTIBYTE_SUPPORT)
+#  undef HANDLE_MULTIBYTE
+#endif
+
+/* Some systems, like BeOS, have multibyte encodings but lack mbstate_t.  */
+#if HANDLE_MULTIBYTE && !defined (HAVE_MBSTATE_T)
+#  define wcsrtombs(dest, src, len, ps) (wcsrtombs) (dest, src, len, 0)
+#  define mbsrtowcs(dest, src, len, ps) (mbsrtowcs) (dest, src, len, 0)
+#  define wcrtomb(s, wc, ps) (wcrtomb) (s, wc, 0)
+#  define mbrtowc(pwc, s, n, ps) (mbrtowc) (pwc, s, n, 0)
+#  define mbrlen(s, n, ps) (mbrlen) (s, n, 0)
+#  define mbstate_t int
+#endif
+
+/* Make sure MB_LEN_MAX is at least 16 on systems that claim to be able to
+   handle multibyte chars (some systems define MB_LEN_MAX as 1) */
+#ifdef HANDLE_MULTIBYTE
+#  include <limits.h>
+#  if defined(MB_LEN_MAX) && (MB_LEN_MAX < 16)
+#    undef MB_LEN_MAX
+#  endif
+#  if !defined (MB_LEN_MAX)
+#    define MB_LEN_MAX 16
+#  endif
+#endif
+
+/************************************************/
+/* end of multibyte capability checks for I18N  */
+/************************************************/
+
+/*
+ * Flags for _rl_find_prev_mbchar and _rl_find_next_mbchar:
+ *
+ * MB_FIND_ANY		find any multibyte character
+ * MB_FIND_NONZERO	find a non-zero-width multibyte character
+ */
+
+#define MB_FIND_ANY	0x00
+#define MB_FIND_NONZERO	0x01
+
+extern int _rl_find_prev_mbchar PARAMS((char *, int, int));
+extern int _rl_find_next_mbchar PARAMS((char *, int, int, int));
+
+#ifdef HANDLE_MULTIBYTE
+
+extern int _rl_compare_chars PARAMS((char *, int, mbstate_t *, char *, int, mbstate_t *));
+extern int _rl_get_char_len PARAMS((char *, mbstate_t *));
+extern int _rl_adjust_point PARAMS((char *, int, mbstate_t *));
+
+extern int _rl_read_mbchar PARAMS((char *, int));
+extern int _rl_read_mbstring PARAMS((int, char *, int));
+
+extern int _rl_is_mbchar_matched PARAMS((char *, int, int, char *, int));
+
+extern wchar_t _rl_char_value PARAMS((char *, int));
+extern int _rl_walphabetic PARAMS((wchar_t));
+
+#define _rl_to_wupper(wc)	(iswlower (wc) ? towupper (wc) : (wc))
+#define _rl_to_wlower(wc)	(iswupper (wc) ? towlower (wc) : (wc))
+
+#define MB_NEXTCHAR(b,s,c,f) \
+	((MB_CUR_MAX > 1 && rl_byte_oriented == 0) \
+		? _rl_find_next_mbchar ((b), (s), (c), (f)) \
+		: ((s) + (c)))
+#define MB_PREVCHAR(b,s,f) \
+	((MB_CUR_MAX > 1 && rl_byte_oriented == 0) \
+		? _rl_find_prev_mbchar ((b), (s), (f)) \
+		: ((s) - 1))
+
+#define MB_INVALIDCH(x)		((x) == (size_t)-1 || (x) == (size_t)-2)
+#define MB_NULLWCH(x)		((x) == 0)
+
+/* Try and shortcut the printable ascii characters to cut down the number of
+   calls to a libc wcwidth() */
+static inline int
+_rl_wcwidth (wc)
+     wchar_t wc;
+{
+  switch (wc)
+    {
+    case ' ': case '!': case '"': case '#': case '%':
+    case '&': case '\'': case '(': case ')': case '*':
+    case '+': case ',': case '-': case '.': case '/':
+    case '0': case '1': case '2': case '3': case '4':
+    case '5': case '6': case '7': case '8': case '9':
+    case ':': case ';': case '<': case '=': case '>':
+    case '?':
+    case 'A': case 'B': case 'C': case 'D': case 'E':
+    case 'F': case 'G': case 'H': case 'I': case 'J':
+    case 'K': case 'L': case 'M': case 'N': case 'O':
+    case 'P': case 'Q': case 'R': case 'S': case 'T':
+    case 'U': case 'V': case 'W': case 'X': case 'Y':
+    case 'Z':
+    case '[': case '\\': case ']': case '^': case '_':
+    case 'a': case 'b': case 'c': case 'd': case 'e':
+    case 'f': case 'g': case 'h': case 'i': case 'j':
+    case 'k': case 'l': case 'm': case 'n': case 'o':
+    case 'p': case 'q': case 'r': case 's': case 't':
+    case 'u': case 'v': case 'w': case 'x': case 'y':
+    case 'z': case '{': case '|': case '}': case '~':
+      return 1;
+    default:
+      return wcwidth (wc);
+    }
+}
+
+/* Unicode combining characters range from U+0300 to U+036F */
+#define UNICODE_COMBINING_CHAR(x) ((x) >= 768 && (x) <= 879)
+
+#if defined (WCWIDTH_BROKEN)
+#  define WCWIDTH(wc)	((_rl_utf8locale && UNICODE_COMBINING_CHAR(wc)) ? 0 : _rl_wcwidth(wc))
+#else
+#  define WCWIDTH(wc)	_rl_wcwidth(wc)
+#endif
+
+#if defined (WCWIDTH_BROKEN)
+#  define IS_COMBINING_CHAR(x)	(WCWIDTH(x) == 0 && iswcntrl(x) == 0)
+#else
+#  define IS_COMBINING_CHAR(x)	(WCWIDTH(x) == 0)
+#endif
+
+#define UTF8_SINGLEBYTE(c)	(((c) & 0x80) == 0)
+#define UTF8_MBFIRSTCHAR(c)	(((c) & 0xc0) == 0xc0)
+#define UTF8_MBCHAR(c)		(((c) & 0xc0) == 0x80)
+
+#else /* !HANDLE_MULTIBYTE */
+
+#undef MB_LEN_MAX
+#undef MB_CUR_MAX
+
+#define MB_LEN_MAX	1
+#define MB_CUR_MAX	1
+
+#define _rl_find_prev_mbchar(b, i, f)		(((i) == 0) ? (i) : ((i) - 1))
+#define _rl_find_next_mbchar(b, i1, i2, f)	((i1) + (i2))
+
+#define _rl_char_value(buf,ind)	((buf)[(ind)])
+
+#define _rl_walphabetic(c)	(rl_alphabetic (c))
+
+#define _rl_to_wupper(c)	(_rl_to_upper (c))
+#define _rl_to_wlower(c)	(_rl_to_lower (c))
+
+#define MB_NEXTCHAR(b,s,c,f)	((s) + (c))
+#define MB_PREVCHAR(b,s,f)	((s) - 1)
+
+#define MB_INVALIDCH(x)		(0)
+#define MB_NULLWCH(x)		(0)
+
+#define UTF8_SINGLEBYTE(c)	(1)
+
+#if !defined (HAVE_WCHAR_T) && !defined (wchar_t)
+#  define wchar_t int
+#endif
+
+#endif /* !HANDLE_MULTIBYTE */
+
+extern int rl_byte_oriented;
+
+#endif /* _RL_MBUTIL_H_ */
diff --git a/lib/readline/rlprivate.h b/lib/readline/rlprivate.h
new file mode 100644
index 0000000..23ab2d8
--- /dev/null
+++ b/lib/readline/rlprivate.h
@@ -0,0 +1,605 @@
+/* rlprivate.h -- functions and variables global to the readline library,
+		  but not intended for use by applications. */
+
+/* Copyright (C) 1999-2020 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_RL_PRIVATE_H_)
+#define _RL_PRIVATE_H_
+
+#include "rlconf.h"	/* for VISIBLE_STATS */
+#include "rlstdc.h"
+#include "posixjmp.h"	/* defines procenv_t */
+#include "rlmbutil.h"	/* for HANDLE_MULTIBYTE */
+
+/*************************************************************************
+ *									 *
+ * Convenience definitions						 *
+ *									 *
+ *************************************************************************/
+
+#define EMACS_MODE()		(rl_editing_mode == emacs_mode)
+#define VI_COMMAND_MODE()	(rl_editing_mode == vi_mode && _rl_keymap == vi_movement_keymap)
+#define VI_INSERT_MODE()	(rl_editing_mode == vi_mode && _rl_keymap == vi_insertion_keymap)
+
+#define RL_CHECK_SIGNALS() \
+	do { \
+	  if (_rl_caught_signal) _rl_signal_handler (_rl_caught_signal); \
+	} while (0)
+
+#define RL_SIG_RECEIVED() (_rl_caught_signal != 0)
+#define RL_SIGINT_RECEIVED() (_rl_caught_signal == SIGINT)
+#define RL_SIGWINCH_RECEIVED() (_rl_caught_signal == SIGWINCH)
+
+#define CUSTOM_REDISPLAY_FUNC() (rl_redisplay_function != rl_redisplay)
+#define CUSTOM_INPUT_FUNC() (rl_getc_function != rl_getc)
+
+/*************************************************************************
+ *									 *
+ * Global structs undocumented in texinfo manual and not in readline.h   *
+ *									 *
+ *************************************************************************/
+/* search types */
+#define RL_SEARCH_ISEARCH	0x01		/* incremental search */
+#define RL_SEARCH_NSEARCH	0x02		/* non-incremental search */
+#define RL_SEARCH_CSEARCH	0x04		/* intra-line char search */
+
+/* search flags */
+#define SF_REVERSE		0x01
+#define SF_FOUND		0x02
+#define SF_FAILED		0x04
+#define SF_CHGKMAP		0x08
+#define SF_PATTERN		0x10
+#define SF_NOCASE		0x20		/* unused so far */
+
+typedef struct  __rl_search_context
+{
+  int type;
+  int sflags;
+
+  char *search_string;
+  int search_string_index;
+  int search_string_size;
+
+  char **lines;
+  char *allocated_line;    
+  int hlen;
+  int hindex;
+
+  int save_point;
+  int save_mark;
+  int save_line;
+  int last_found_line;
+  char *prev_line_found;
+
+  UNDO_LIST *save_undo_list;
+
+  Keymap keymap;	/* used when dispatching commands in search string */
+  Keymap okeymap;	/* original keymap */
+
+  int history_pos;
+  int direction;
+
+  int prevc;
+  int lastc;
+#if defined (HANDLE_MULTIBYTE)
+  char mb[MB_LEN_MAX];
+  char pmb[MB_LEN_MAX];
+#endif
+
+  char *sline;
+  int sline_len;
+  int sline_index;
+
+  char  *search_terminators;
+} _rl_search_cxt;
+
+struct _rl_cmd {
+  Keymap map;
+  int count;
+  int key;
+  rl_command_func_t *func;
+};
+extern struct _rl_cmd _rl_pending_command;
+extern struct _rl_cmd *_rl_command_to_execute;
+
+/* Callback data for reading numeric arguments */
+#define NUM_SAWMINUS	0x01
+#define NUM_SAWDIGITS	0x02
+#define NUM_READONE	0x04
+
+typedef int _rl_arg_cxt;
+
+/* A context for reading key sequences longer than a single character when
+   using the callback interface. */
+#define KSEQ_DISPATCHED	0x01
+#define KSEQ_SUBSEQ	0x02
+#define KSEQ_RECURSIVE	0x04
+
+typedef struct __rl_keyseq_context
+{
+  int flags;
+  int subseq_arg;
+  int subseq_retval;		/* XXX */
+  int okey;
+
+  Keymap dmap;
+  Keymap oldmap;
+
+  struct __rl_keyseq_context *ocxt;
+  int childval;
+} _rl_keyseq_cxt;
+
+/* vi-mode commands that use result of motion command to define boundaries */
+#define VIM_DELETE	0x01
+#define VIM_CHANGE	0x02
+#define VIM_YANK	0x04
+
+/* various states for vi-mode commands that use motion commands.  reflects
+   RL_READLINE_STATE */
+#define VMSTATE_READ	0x01
+#define VMSTATE_NUMARG	0x02
+
+typedef struct __rl_vimotion_context
+{
+  int op;
+  int state;
+  int flags;		/* reserved */
+  _rl_arg_cxt ncxt;
+  int numeric_arg;
+  int start, end;	/* rl_point, rl_end */
+  int key, motion;	/* initial key, motion command */
+} _rl_vimotion_cxt;
+
+/* fill in more as needed */
+/* `Generic' callback data and functions */
+typedef struct __rl_callback_generic_arg 
+{
+  int count;
+  int i1, i2;
+  /* add here as needed */
+} _rl_callback_generic_arg;
+
+typedef int _rl_callback_func_t PARAMS((_rl_callback_generic_arg *));
+
+typedef void _rl_sigcleanup_func_t PARAMS((int, void *));
+
+/*************************************************************************
+ *									 *
+ * Global functions undocumented in texinfo manual and not in readline.h *
+ *									 *
+ *************************************************************************/
+
+/*************************************************************************
+ *									 *
+ * Global variables undocumented in texinfo manual and not in readline.h *
+ *									 *
+ *************************************************************************/
+
+/* complete.c */
+extern int rl_complete_with_tilde_expansion;
+#if defined (VISIBLE_STATS)
+extern int rl_visible_stats;
+#endif /* VISIBLE_STATS */
+#if defined (COLOR_SUPPORT)
+extern int _rl_colored_stats;
+extern int _rl_colored_completion_prefix;
+#endif
+
+/* readline.c */
+extern int rl_line_buffer_len;
+extern int rl_arg_sign;
+extern int rl_visible_prompt_length;
+extern int rl_byte_oriented;
+
+/* display.c */
+extern int rl_display_fixed;
+
+/* parens.c */
+extern int rl_blink_matching_paren;
+
+/*************************************************************************
+ *									 *
+ * Global functions and variables unused and undocumented		 *
+ *									 *
+ *************************************************************************/
+
+/* kill.c */
+extern int rl_set_retained_kills PARAMS((int));
+
+/* terminal.c */
+extern void _rl_set_screen_size PARAMS((int, int));
+
+/* undo.c */
+extern int _rl_fix_last_undo_of_type PARAMS((int, int, int));
+
+/* util.c */
+extern char *_rl_savestring PARAMS((const char *));
+
+/*************************************************************************
+ *									 *
+ * Functions and variables private to the readline library		 *
+ *									 *
+ *************************************************************************/
+
+/* NOTE: Functions and variables prefixed with `_rl_' are
+   pseudo-global: they are global so they can be shared
+   between files in the readline library, but are not intended
+   to be visible to readline callers. */
+
+/*************************************************************************
+ * Undocumented private functions					 *
+ *************************************************************************/
+
+#if defined(READLINE_CALLBACKS)
+
+/* readline.c */
+extern void readline_internal_setup PARAMS((void));
+extern char *readline_internal_teardown PARAMS((int));
+extern int readline_internal_char PARAMS((void));
+
+extern _rl_keyseq_cxt *_rl_keyseq_cxt_alloc PARAMS((void));
+extern void _rl_keyseq_cxt_dispose PARAMS((_rl_keyseq_cxt *));
+extern void _rl_keyseq_chain_dispose PARAMS((void));
+
+extern int _rl_dispatch_callback PARAMS((_rl_keyseq_cxt *));
+     
+/* callback.c */
+extern _rl_callback_generic_arg *_rl_callback_data_alloc PARAMS((int));
+extern void _rl_callback_data_dispose PARAMS((_rl_callback_generic_arg *));
+
+#endif /* READLINE_CALLBACKS */
+
+/* bind.c */
+extern char *_rl_untranslate_macro_value PARAMS((char *, int));
+
+/* complete.c */
+extern void _rl_reset_completion_state PARAMS((void));
+extern char _rl_find_completion_word PARAMS((int *, int *));
+extern void _rl_free_match_list PARAMS((char **));
+
+/* display.c */
+extern char *_rl_strip_prompt PARAMS((char *));
+extern void _rl_reset_prompt PARAMS((void));
+extern void _rl_move_vert PARAMS((int));
+extern void _rl_save_prompt PARAMS((void));
+extern void _rl_restore_prompt PARAMS((void));
+extern char *_rl_make_prompt_for_search PARAMS((int));
+extern void _rl_erase_at_end_of_line PARAMS((int));
+extern void _rl_clear_to_eol PARAMS((int));
+extern void _rl_clear_screen PARAMS((int));
+extern void _rl_update_final PARAMS((void));
+extern void _rl_optimize_redisplay PARAMS((void));
+extern void _rl_redisplay_after_sigwinch PARAMS((void));
+extern void _rl_clean_up_for_exit PARAMS((void));
+extern void _rl_erase_entire_line PARAMS((void));
+extern int _rl_current_display_line PARAMS((void));
+extern void _rl_refresh_line PARAMS((void));
+
+/* input.c */
+extern int _rl_any_typein PARAMS((void));
+extern int _rl_input_available PARAMS((void));
+extern int _rl_nchars_available PARAMS((void));
+extern int _rl_input_queued PARAMS((int));
+extern void _rl_insert_typein PARAMS((int));
+extern int _rl_unget_char PARAMS((int));
+extern int _rl_pushed_input_available PARAMS((void));
+
+/* isearch.c */
+extern _rl_search_cxt *_rl_scxt_alloc PARAMS((int, int));
+extern void _rl_scxt_dispose PARAMS((_rl_search_cxt *, int));
+
+extern int _rl_isearch_dispatch PARAMS((_rl_search_cxt *, int));
+extern int _rl_isearch_callback PARAMS((_rl_search_cxt *));
+extern int _rl_isearch_cleanup PARAMS((_rl_search_cxt *, int));
+
+extern int _rl_search_getchar PARAMS((_rl_search_cxt *));
+
+/* kill.c */
+#ifndef BRACKETED_PASTE_DEFAULT
+#  define BRACKETED_PASTE_DEFAULT	1	/* XXX - for now */
+#endif
+
+#define BRACK_PASTE_PREF	"\033[200~"
+#define BRACK_PASTE_SUFF	"\033[201~"
+
+#define BRACK_PASTE_LAST	'~'
+#define BRACK_PASTE_SLEN	6
+
+#define BRACK_PASTE_INIT	"\033[?2004h"
+#define BRACK_PASTE_FINI	"\033[?2004l\r"
+
+extern int _rl_read_bracketed_paste_prefix PARAMS((int));
+extern char *_rl_bracketed_text PARAMS((size_t *));
+extern int _rl_bracketed_read_key PARAMS((void));
+extern int _rl_bracketed_read_mbstring PARAMS((char *, int));
+
+/* macro.c */
+extern void _rl_with_macro_input PARAMS((char *));
+extern int _rl_peek_macro_key PARAMS((void));
+extern int _rl_next_macro_key PARAMS((void));
+extern int _rl_prev_macro_key PARAMS((void));
+extern void _rl_push_executing_macro PARAMS((void));
+extern void _rl_pop_executing_macro PARAMS((void));
+extern void _rl_add_macro_char PARAMS((int));
+extern void _rl_kill_kbd_macro PARAMS((void));
+
+/* misc.c */
+extern int _rl_arg_overflow PARAMS((void));
+extern void _rl_arg_init PARAMS((void));
+extern int _rl_arg_getchar PARAMS((void));
+extern int _rl_arg_callback PARAMS((_rl_arg_cxt));
+extern void _rl_reset_argument PARAMS((void));
+
+extern void _rl_start_using_history PARAMS((void));
+extern int _rl_free_saved_history_line PARAMS((void));
+extern void _rl_set_insert_mode PARAMS((int, int));
+
+extern void _rl_revert_previous_lines PARAMS((void));
+extern void _rl_revert_all_lines PARAMS((void));
+
+/* nls.c */
+extern char *_rl_init_locale PARAMS((void));
+extern int _rl_init_eightbit PARAMS((void));
+
+/* parens.c */
+extern void _rl_enable_paren_matching PARAMS((int));
+
+/* readline.c */
+extern void _rl_init_line_state PARAMS((void));
+extern void _rl_set_the_line PARAMS((void));
+extern int _rl_dispatch PARAMS((int, Keymap));
+extern int _rl_dispatch_subseq PARAMS((int, Keymap, int));
+extern void _rl_internal_char_cleanup PARAMS((void));
+
+extern void _rl_init_executing_keyseq PARAMS((void));
+extern void _rl_term_executing_keyseq PARAMS((void));
+extern void _rl_end_executing_keyseq PARAMS((void));
+extern void _rl_add_executing_keyseq PARAMS((int)); 
+
+/* rltty.c */
+extern int _rl_disable_tty_signals PARAMS((void));
+extern int _rl_restore_tty_signals PARAMS((void));
+
+/* search.c */
+extern int _rl_nsearch_callback PARAMS((_rl_search_cxt *));
+extern int _rl_nsearch_cleanup PARAMS((_rl_search_cxt *, int));
+
+/* signals.c */
+extern void _rl_signal_handler PARAMS((int));
+
+extern void _rl_block_sigint PARAMS((void));
+extern void _rl_release_sigint PARAMS((void));
+extern void _rl_block_sigwinch PARAMS((void));
+extern void _rl_release_sigwinch PARAMS((void));
+
+/* terminal.c */
+extern void _rl_get_screen_size PARAMS((int, int));
+extern void _rl_sigwinch_resize_terminal PARAMS((void));
+extern int _rl_init_terminal_io PARAMS((const char *));
+#ifdef _MINIX
+extern void _rl_output_character_function PARAMS((int));
+#else
+extern int _rl_output_character_function PARAMS((int));
+#endif
+extern void _rl_cr PARAMS((void));
+extern void _rl_output_some_chars PARAMS((const char *, int));
+extern int _rl_backspace PARAMS((int));
+extern void _rl_enable_meta_key PARAMS((void));
+extern void _rl_disable_meta_key PARAMS((void));
+extern void _rl_control_keypad PARAMS((int));
+extern void _rl_set_cursor PARAMS((int, int));
+extern void _rl_standout_on PARAMS((void));
+extern void _rl_standout_off PARAMS((void));
+
+/* text.c */
+extern void _rl_fix_point PARAMS((int));
+extern void _rl_fix_mark PARAMS((void));
+extern int _rl_replace_text PARAMS((const char *, int, int));
+extern int _rl_forward_char_internal PARAMS((int));
+extern int _rl_backward_char_internal PARAMS((int));
+extern int _rl_insert_char PARAMS((int, int));
+extern int _rl_overwrite_char PARAMS((int, int));
+extern int _rl_overwrite_rubout PARAMS((int, int));
+extern int _rl_rubout_char PARAMS((int, int));
+#if defined (HANDLE_MULTIBYTE)
+extern int _rl_char_search_internal PARAMS((int, int, char *, int));
+#else
+extern int _rl_char_search_internal PARAMS((int, int, int));
+#endif
+extern int _rl_set_mark_at_pos PARAMS((int));
+
+/* undo.c */
+extern UNDO_LIST *_rl_copy_undo_entry PARAMS((UNDO_LIST *));
+extern UNDO_LIST *_rl_copy_undo_list PARAMS((UNDO_LIST *));
+extern void _rl_free_undo_list PARAMS((UNDO_LIST *));
+
+/* util.c */
+#if defined (USE_VARARGS) && defined (PREFER_STDARG)
+extern void _rl_ttymsg (const char *, ...)  __attribute__((__format__ (printf, 1, 2)));
+extern void _rl_errmsg (const char *, ...)  __attribute__((__format__ (printf, 1, 2)));
+extern void _rl_trace (const char *, ...)  __attribute__((__format__ (printf, 1, 2)));
+#else
+extern void _rl_ttymsg ();
+extern void _rl_errmsg ();
+extern void _rl_trace ();
+#endif
+extern void _rl_audit_tty PARAMS((char *));
+
+extern int _rl_tropen PARAMS((void));
+
+extern int _rl_abort_internal PARAMS((void));
+extern int _rl_null_function PARAMS((int, int));
+extern char *_rl_strindex PARAMS((const char *, const char *));
+extern int _rl_qsort_string_compare PARAMS((char **, char **));
+extern int (_rl_uppercase_p) PARAMS((int));
+extern int (_rl_lowercase_p) PARAMS((int));
+extern int (_rl_pure_alphabetic) PARAMS((int));
+extern int (_rl_digit_p) PARAMS((int));
+extern int (_rl_to_lower) PARAMS((int));
+extern int (_rl_to_upper) PARAMS((int));
+extern int (_rl_digit_value) PARAMS((int));
+
+/* vi_mode.c */
+extern void _rl_vi_initialize_line PARAMS((void));
+extern void _rl_vi_reset_last PARAMS((void));
+extern void _rl_vi_set_last PARAMS((int, int, int));
+extern int _rl_vi_textmod_command PARAMS((int));
+extern int _rl_vi_motion_command PARAMS((int));
+extern void _rl_vi_done_inserting PARAMS((void));
+extern int _rl_vi_domove_callback PARAMS((_rl_vimotion_cxt *));
+extern int _rl_vi_domove_motion_cleanup PARAMS((int, _rl_vimotion_cxt *));
+
+/*************************************************************************
+ * Undocumented private variables					 *
+ *************************************************************************/
+
+/* bind.c */
+extern const char * const _rl_possible_control_prefixes[];
+extern const char * const _rl_possible_meta_prefixes[];
+
+/* callback.c */
+extern _rl_callback_func_t *_rl_callback_func;
+extern _rl_callback_generic_arg *_rl_callback_data;
+
+/* complete.c */
+extern int _rl_complete_show_all;
+extern int _rl_complete_show_unmodified;
+extern int _rl_complete_mark_directories;
+extern int _rl_complete_mark_symlink_dirs;
+extern int _rl_completion_prefix_display_length;
+extern int _rl_completion_columns;
+extern int _rl_print_completions_horizontally;
+extern int _rl_completion_case_fold;
+extern int _rl_completion_case_map;
+extern int _rl_match_hidden_files;
+extern int _rl_page_completions;
+extern int _rl_skip_completed_text;
+extern int _rl_menu_complete_prefix_first;
+
+/* display.c */
+extern int _rl_vis_botlin;
+extern int _rl_last_c_pos;
+extern int _rl_suppress_redisplay;
+extern int _rl_want_redisplay;
+
+extern char *_rl_emacs_mode_str;
+extern int _rl_emacs_modestr_len;
+extern char *_rl_vi_ins_mode_str;
+extern int _rl_vi_ins_modestr_len;
+extern char *_rl_vi_cmd_mode_str;
+extern int _rl_vi_cmd_modestr_len;
+
+/* isearch.c */
+extern char *_rl_isearch_terminators;
+
+extern _rl_search_cxt *_rl_iscxt;
+
+/* macro.c */
+extern char *_rl_executing_macro;
+
+/* misc.c */
+extern int _rl_history_preserve_point;
+extern int _rl_history_saved_point;
+
+extern _rl_arg_cxt _rl_argcxt;
+
+/* nls.c */
+extern int _rl_utf8locale;
+
+/* readline.c */
+extern int _rl_echoing_p;
+extern int _rl_horizontal_scroll_mode;
+extern int _rl_mark_modified_lines;
+extern int _rl_bell_preference;
+extern int _rl_meta_flag;
+extern int _rl_convert_meta_chars_to_ascii;
+extern int _rl_output_meta_chars;
+extern int _rl_bind_stty_chars;
+extern int _rl_revert_all_at_newline;
+extern int _rl_echo_control_chars;
+extern int _rl_show_mode_in_prompt;
+extern int _rl_enable_bracketed_paste;
+extern int _rl_enable_active_region;
+extern char *_rl_comment_begin;
+extern unsigned char _rl_parsing_conditionalized_out;
+extern Keymap _rl_keymap;
+extern FILE *_rl_in_stream;
+extern FILE *_rl_out_stream;
+extern int _rl_last_command_was_kill;
+extern int _rl_eof_char;
+extern int _rl_eof_found;
+extern procenv_t _rl_top_level;
+extern _rl_keyseq_cxt *_rl_kscxt;
+extern int _rl_keyseq_timeout;
+
+extern int _rl_executing_keyseq_size;
+
+extern rl_hook_func_t *_rl_internal_startup_hook;
+
+/* search.c */
+extern _rl_search_cxt *_rl_nscxt;
+
+/* signals.c */
+extern int volatile _rl_caught_signal;
+
+extern _rl_sigcleanup_func_t *_rl_sigcleanup;
+extern void *_rl_sigcleanarg;
+
+extern int _rl_echoctl;
+
+extern int _rl_intr_char;
+extern int _rl_quit_char;
+extern int _rl_susp_char;
+
+/* terminal.c */
+extern int _rl_enable_keypad;
+extern int _rl_enable_meta;
+extern char *_rl_term_clreol;
+extern char *_rl_term_clrpag;
+extern char *_rl_term_clrscroll;
+extern char *_rl_term_im;
+extern char *_rl_term_ic;
+extern char *_rl_term_ei;
+extern char *_rl_term_DC;
+extern char *_rl_term_up;
+extern char *_rl_term_dc;
+extern char *_rl_term_cr;
+extern char *_rl_term_IC;
+extern char *_rl_term_forward_char;
+extern int _rl_screenheight;
+extern int _rl_screenwidth;
+extern int _rl_screenchars;
+extern int _rl_terminal_can_insert;
+extern int _rl_term_autowrap;
+
+/* text.c */
+extern int _rl_optimize_typeahead;
+extern int _rl_keep_mark_active;
+
+/* undo.c */
+extern int _rl_doing_an_undo;
+extern int _rl_undo_group_level;
+
+/* vi_mode.c */
+extern int _rl_vi_last_command;
+extern int _rl_vi_redoing;
+extern _rl_vimotion_cxt *_rl_vimvcxt;
+
+#endif /* _RL_PRIVATE_H_ */
diff --git a/lib/readline/rlshell.h b/lib/readline/rlshell.h
new file mode 100644
index 0000000..3e17d8b
--- /dev/null
+++ b/lib/readline/rlshell.h
@@ -0,0 +1,33 @@
+/* rlshell.h -- utility functions normally provided by bash. */
+
+/* Copyright (C) 1999-2009 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_RL_SHELL_H_)
+#define _RL_SHELL_H_
+
+#include "rlstdc.h"
+
+extern char *sh_single_quote PARAMS((char *));
+extern void sh_set_lines_and_columns PARAMS((int, int));
+extern char *sh_get_env_value PARAMS((const char *));
+extern char *sh_get_home_dir PARAMS((void));
+extern int sh_unset_nodelay_mode PARAMS((int));
+
+#endif /* _RL_SHELL_H_ */
diff --git a/lib/readline/rlstdc.h b/lib/readline/rlstdc.h
new file mode 100644
index 0000000..2aaa30b
--- /dev/null
+++ b/lib/readline/rlstdc.h
@@ -0,0 +1,57 @@
+/* stdc.h -- macros to make source compile on both ANSI C and K&R C compilers. */
+
+/* Copyright (C) 1993-2009 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_RL_STDC_H_)
+#define _RL_STDC_H_
+
+/* Adapted from BSD /usr/include/sys/cdefs.h. */
+
+/* A function can be defined using prototypes and compile on both ANSI C
+   and traditional C compilers with something like this:
+	extern char *func PARAMS((char *, char *, int)); */
+
+#if !defined (PARAMS)
+#  if defined (__STDC__) || defined (__GNUC__) || defined (__cplusplus)
+#    define PARAMS(protos) protos
+#  else
+#    define PARAMS(protos) ()
+#  endif
+#endif
+
+#ifndef __attribute__
+#  if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 8)
+#    define __attribute__(x)
+#  endif
+#endif
+
+/* Moved from config.h.in because readline.h:rl_message depends on these
+   defines. */
+#if defined (__STDC__) && defined (HAVE_STDARG_H)
+#  define PREFER_STDARG
+#  define USE_VARARGS
+#else
+#  if defined (HAVE_VARARGS_H)
+#    define PREFER_VARARGS
+#    define USE_VARARGS
+#  endif
+#endif
+
+#endif /* !_RL_STDC_H_ */
diff --git a/lib/readline/rltty.c b/lib/readline/rltty.c
new file mode 100644
index 0000000..d0cd572
--- /dev/null
+++ b/lib/readline/rltty.c
@@ -0,0 +1,991 @@
+/* rltty.c -- functions to prepare and restore the terminal for readline's
+   use. */
+
+/* Copyright (C) 1992-2017 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <sys/types.h>
+#include <signal.h>
+#include <errno.h>
+#include <stdio.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif /* HAVE_UNISTD_H */
+
+#include "rldefs.h"
+
+#include "rltty.h"
+#if defined (HAVE_SYS_IOCTL_H)
+#  include <sys/ioctl.h>		/* include for declaration of ioctl */
+#endif
+
+#include "readline.h"
+#include "rlprivate.h"
+
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+rl_vintfunc_t *rl_prep_term_function = rl_prep_terminal;
+rl_voidfunc_t *rl_deprep_term_function = rl_deprep_terminal;
+
+static void set_winsize PARAMS((int));
+
+/* **************************************************************** */
+/*								    */
+/*		      Saving and Restoring the TTY	    	    */
+/*								    */
+/* **************************************************************** */
+
+/* Non-zero means that the terminal is in a prepped state.  There are several
+   flags that are OR'd in to denote whether or not we have sent various
+   init strings to the terminal. */
+#define TPX_PREPPED	0x01
+#define TPX_BRACKPASTE	0x02
+#define TPX_METAKEY	0x04
+
+static int terminal_prepped;
+
+static _RL_TTY_CHARS _rl_tty_chars, _rl_last_tty_chars;
+
+/* If non-zero, means that this process has called tcflow(fd, TCOOFF)
+   and output is suspended. */
+#if defined (__ksr1__)
+static int ksrflow;
+#endif
+
+/* Dummy call to force a backgrounded readline to stop before it tries
+   to get the tty settings. */
+static void
+set_winsize (tty)
+     int tty;
+{
+#if defined (TIOCGWINSZ)
+  struct winsize w;
+
+  if (ioctl (tty, TIOCGWINSZ, &w) == 0)
+      (void) ioctl (tty, TIOCSWINSZ, &w);
+#endif /* TIOCGWINSZ */
+}
+
+#if defined (NO_TTY_DRIVER)
+/* Nothing */
+#elif defined (NEW_TTY_DRIVER)
+
+/* Values for the `flags' field of a struct bsdtty.  This tells which
+   elements of the struct bsdtty have been fetched from the system and
+   are valid. */
+#define SGTTY_SET	0x01
+#define LFLAG_SET	0x02
+#define TCHARS_SET	0x04
+#define LTCHARS_SET	0x08
+
+struct bsdtty {
+  struct sgttyb sgttyb;	/* Basic BSD tty driver information. */
+  int lflag;		/* Local mode flags, like LPASS8. */
+#if defined (TIOCGETC)
+  struct tchars tchars;	/* Terminal special characters, including ^S and ^Q. */
+#endif
+#if defined (TIOCGLTC)
+  struct ltchars ltchars; /* 4.2 BSD editing characters */
+#endif
+  int flags;		/* Bitmap saying which parts of the struct are valid. */
+};
+
+#define TIOTYPE struct bsdtty
+
+static TIOTYPE otio;
+
+static void save_tty_chars PARAMS((TIOTYPE *));
+static int _get_tty_settings PARAMS((int, TIOTYPE *));
+static int get_tty_settings PARAMS((int, TIOTYPE *));
+static int _set_tty_settings PARAMS((int, TIOTYPE *));
+static int set_tty_settings PARAMS((int, TIOTYPE *));
+
+static void prepare_terminal_settings PARAMS((int, TIOTYPE, TIOTYPE *));
+
+static void set_special_char PARAMS((Keymap, TIOTYPE *, int, rl_command_func_t *));
+
+static void
+save_tty_chars (TIOTYPE *tiop)
+{
+  _rl_last_tty_chars = _rl_tty_chars;
+
+  if (tiop->flags & SGTTY_SET)
+    {
+      _rl_tty_chars.t_erase = tiop->sgttyb.sg_erase;
+      _rl_tty_chars.t_kill = tiop->sgttyb.sg_kill;
+    }
+
+  if (tiop->flags & TCHARS_SET)
+    {
+      _rl_intr_char = _rl_tty_chars.t_intr = tiop->tchars.t_intrc;
+      _rl_quit_char = _rl_tty_chars.t_quit = tiop->tchars.t_quitc;
+
+      _rl_tty_chars.t_start = tiop->tchars.t_startc;
+      _rl_tty_chars.t_stop = tiop->tchars.t_stopc;
+      _rl_tty_chars.t_eof = tiop->tchars.t_eofc;
+      _rl_tty_chars.t_eol = '\n';
+      _rl_tty_chars.t_eol2 = tiop->tchars.t_brkc;
+    }
+
+  if (tiop->flags & LTCHARS_SET)
+    {
+      _rl_susp_char = _rl_tty_chars.t_susp = tiop->ltchars.t_suspc;
+
+      _rl_tty_chars.t_dsusp = tiop->ltchars.t_dsuspc;
+      _rl_tty_chars.t_reprint = tiop->ltchars.t_rprntc;
+      _rl_tty_chars.t_flush = tiop->ltchars.t_flushc;
+      _rl_tty_chars.t_werase = tiop->ltchars.t_werasc;
+      _rl_tty_chars.t_lnext = tiop->ltchars.t_lnextc;
+    }
+
+  _rl_tty_chars.t_status = -1;
+}
+
+static int
+get_tty_settings (int tty, TIOTYPE *tiop)
+{
+  set_winsize (tty);
+
+  tiop->flags = tiop->lflag = 0;
+
+  errno = 0;
+  if (ioctl (tty, TIOCGETP, &(tiop->sgttyb)) < 0)
+    return -1;
+  tiop->flags |= SGTTY_SET;
+
+#if defined (TIOCLGET)
+  if (ioctl (tty, TIOCLGET, &(tiop->lflag)) == 0)
+    tiop->flags |= LFLAG_SET;
+#endif
+
+#if defined (TIOCGETC)
+  if (ioctl (tty, TIOCGETC, &(tiop->tchars)) == 0)
+    tiop->flags |= TCHARS_SET;
+#endif
+
+#if defined (TIOCGLTC)
+  if (ioctl (tty, TIOCGLTC, &(tiop->ltchars)) == 0)
+    tiop->flags |= LTCHARS_SET;
+#endif
+
+  return 0;
+}
+
+static int
+set_tty_settings (int tty, TIOTYPE *tiop)
+{
+  if (tiop->flags & SGTTY_SET)
+    {
+      ioctl (tty, TIOCSETN, &(tiop->sgttyb));
+      tiop->flags &= ~SGTTY_SET;
+    }
+  _rl_echoing_p = 1;
+
+#if defined (TIOCLSET)
+  if (tiop->flags & LFLAG_SET)
+    {
+      ioctl (tty, TIOCLSET, &(tiop->lflag));
+      tiop->flags &= ~LFLAG_SET;
+    }
+#endif
+
+#if defined (TIOCSETC)
+  if (tiop->flags & TCHARS_SET)
+    {
+      ioctl (tty, TIOCSETC, &(tiop->tchars));
+      tiop->flags &= ~TCHARS_SET;
+    }
+#endif
+
+#if defined (TIOCSLTC)
+  if (tiop->flags & LTCHARS_SET)
+    {
+      ioctl (tty, TIOCSLTC, &(tiop->ltchars));
+      tiop->flags &= ~LTCHARS_SET;
+    }
+#endif
+
+  return 0;
+}
+
+static void
+prepare_terminal_settings (int meta_flag, TIOTYPE oldtio, TIOTYPE *tiop)
+{
+  _rl_echoing_p = (oldtio.sgttyb.sg_flags & ECHO);
+  _rl_echoctl = (oldtio.sgttyb.sg_flags & ECHOCTL);
+
+  /* Copy the original settings to the structure we're going to use for
+     our settings. */
+  tiop->sgttyb = oldtio.sgttyb;
+  tiop->lflag = oldtio.lflag;
+#if defined (TIOCGETC)
+  tiop->tchars = oldtio.tchars;
+#endif
+#if defined (TIOCGLTC)
+  tiop->ltchars = oldtio.ltchars;
+#endif
+  tiop->flags = oldtio.flags;
+
+  /* First, the basic settings to put us into character-at-a-time, no-echo
+     input mode. */
+  tiop->sgttyb.sg_flags &= ~(ECHO | CRMOD);
+  tiop->sgttyb.sg_flags |= CBREAK;
+
+  /* If this terminal doesn't care how the 8th bit is used, then we can
+     use it for the meta-key.  If only one of even or odd parity is
+     specified, then the terminal is using parity, and we cannot. */
+#if !defined (ANYP)
+#  define ANYP (EVENP | ODDP)
+#endif
+  if (((oldtio.sgttyb.sg_flags & ANYP) == ANYP) ||
+      ((oldtio.sgttyb.sg_flags & ANYP) == 0))
+    {
+      tiop->sgttyb.sg_flags |= ANYP;
+
+      /* Hack on local mode flags if we can. */
+#if defined (TIOCLGET)
+#  if defined (LPASS8)
+      tiop->lflag |= LPASS8;
+#  endif /* LPASS8 */
+#endif /* TIOCLGET */
+    }
+
+#if defined (TIOCGETC)
+#  if defined (USE_XON_XOFF)
+  /* Get rid of terminal output start and stop characters. */
+  tiop->tchars.t_stopc = -1; /* C-s */
+  tiop->tchars.t_startc = -1; /* C-q */
+
+  /* If there is an XON character, bind it to restart the output. */
+  if (oldtio.tchars.t_startc != -1)
+    rl_bind_key (oldtio.tchars.t_startc, rl_restart_output);
+#  endif /* USE_XON_XOFF */
+
+  /* If there is an EOF char, bind _rl_eof_char to it. */
+  if (oldtio.tchars.t_eofc != -1)
+    _rl_eof_char = oldtio.tchars.t_eofc;
+
+#  if defined (NO_KILL_INTR)
+  /* Get rid of terminal-generated SIGQUIT and SIGINT. */
+  tiop->tchars.t_quitc = -1; /* C-\ */
+  tiop->tchars.t_intrc = -1; /* C-c */
+#  endif /* NO_KILL_INTR */
+#endif /* TIOCGETC */
+
+#if defined (TIOCGLTC)
+  /* Make the interrupt keys go away.  Just enough to make people happy. */
+  tiop->ltchars.t_dsuspc = -1;	/* C-y */
+  tiop->ltchars.t_lnextc = -1;	/* C-v */
+#endif /* TIOCGLTC */
+}
+
+#else  /* !defined (NEW_TTY_DRIVER) */
+
+#if !defined (VMIN)
+#  define VMIN VEOF
+#endif
+
+#if !defined (VTIME)
+#  define VTIME VEOL
+#endif
+
+#if defined (TERMIOS_TTY_DRIVER)
+#  define TIOTYPE struct termios
+#  define DRAIN_OUTPUT(fd)	tcdrain (fd)
+#  define GETATTR(tty, tiop)	(tcgetattr (tty, tiop))
+#  ifdef M_UNIX
+#    define SETATTR(tty, tiop)	(tcsetattr (tty, TCSANOW, tiop))
+#  else
+#    define SETATTR(tty, tiop)	(tcsetattr (tty, TCSADRAIN, tiop))
+#  endif /* !M_UNIX */
+#else
+#  define TIOTYPE struct termio
+#  define DRAIN_OUTPUT(fd)
+#  define GETATTR(tty, tiop)	(ioctl (tty, TCGETA, tiop))
+#  define SETATTR(tty, tiop)	(ioctl (tty, TCSETAW, tiop))
+#endif /* !TERMIOS_TTY_DRIVER */
+
+static TIOTYPE otio;
+
+static void save_tty_chars PARAMS((TIOTYPE *));
+static int _get_tty_settings PARAMS((int, TIOTYPE *));
+static int get_tty_settings PARAMS((int, TIOTYPE *));
+static int _set_tty_settings PARAMS((int, TIOTYPE *));
+static int set_tty_settings PARAMS((int, TIOTYPE *));
+
+static void prepare_terminal_settings PARAMS((int, TIOTYPE, TIOTYPE *));
+
+static void set_special_char PARAMS((Keymap, TIOTYPE *, int, rl_command_func_t *));
+static void _rl_bind_tty_special_chars PARAMS((Keymap, TIOTYPE));
+
+#if defined (FLUSHO)
+#  define OUTPUT_BEING_FLUSHED(tp)  (tp->c_lflag & FLUSHO)
+#else
+#  define OUTPUT_BEING_FLUSHED(tp)  0
+#endif
+
+static void
+save_tty_chars (TIOTYPE *tiop)
+{
+  _rl_last_tty_chars = _rl_tty_chars;
+
+  _rl_tty_chars.t_eof = tiop->c_cc[VEOF];
+  _rl_tty_chars.t_eol = tiop->c_cc[VEOL];
+#ifdef VEOL2
+  _rl_tty_chars.t_eol2 = tiop->c_cc[VEOL2];
+#endif
+  _rl_tty_chars.t_erase = tiop->c_cc[VERASE];
+#ifdef VWERASE
+  _rl_tty_chars.t_werase = tiop->c_cc[VWERASE];
+#endif
+  _rl_tty_chars.t_kill = tiop->c_cc[VKILL];
+#ifdef VREPRINT
+  _rl_tty_chars.t_reprint = tiop->c_cc[VREPRINT];
+#endif
+  _rl_intr_char = _rl_tty_chars.t_intr = tiop->c_cc[VINTR];
+  _rl_quit_char = _rl_tty_chars.t_quit = tiop->c_cc[VQUIT];
+#ifdef VSUSP
+  _rl_susp_char = _rl_tty_chars.t_susp = tiop->c_cc[VSUSP];
+#endif
+#ifdef VDSUSP
+  _rl_tty_chars.t_dsusp = tiop->c_cc[VDSUSP];
+#endif
+#ifdef VSTART
+  _rl_tty_chars.t_start = tiop->c_cc[VSTART];
+#endif
+#ifdef VSTOP
+  _rl_tty_chars.t_stop = tiop->c_cc[VSTOP];
+#endif
+#ifdef VLNEXT
+  _rl_tty_chars.t_lnext = tiop->c_cc[VLNEXT];
+#endif
+#ifdef VDISCARD
+  _rl_tty_chars.t_flush = tiop->c_cc[VDISCARD];
+#endif
+#ifdef VSTATUS
+  _rl_tty_chars.t_status = tiop->c_cc[VSTATUS];
+#endif
+}
+
+#if defined (_AIX) || defined (_AIX41)
+/* Currently this is only used on AIX */
+static void
+rltty_warning (char *msg)
+{
+  _rl_errmsg ("warning: %s", msg);
+}
+#endif
+
+#if defined (_AIX)
+void
+setopost (TIOTYPE *tp)
+{
+  if ((tp->c_oflag & OPOST) == 0)
+    {
+      _rl_errmsg ("warning: turning on OPOST for terminal\r");
+      tp->c_oflag |= OPOST|ONLCR;
+    }
+}
+#endif
+
+static int
+_get_tty_settings (int tty, TIOTYPE *tiop)
+{
+  int ioctl_ret;
+
+  while (1)
+    {
+      ioctl_ret = GETATTR (tty, tiop);
+      if (ioctl_ret < 0)
+	{
+	  if (errno != EINTR)
+	    return -1;
+	  else
+	    continue;
+	}
+      if (OUTPUT_BEING_FLUSHED (tiop))
+	{
+#if defined (FLUSHO)
+	  _rl_errmsg ("warning: turning off output flushing");
+	  tiop->c_lflag &= ~FLUSHO;
+	  break;
+#else
+	  continue;
+#endif
+	}
+      break;
+    }
+
+  return 0;
+}
+
+static int
+get_tty_settings (int tty, TIOTYPE *tiop)
+{
+  set_winsize (tty);
+
+  errno = 0;
+  if (_get_tty_settings (tty, tiop) < 0)
+    return -1;
+
+#if defined (_AIX)
+  setopost(tiop);
+#endif
+
+  return 0;
+}
+
+static int
+_set_tty_settings (int tty, TIOTYPE *tiop)
+{
+  while (SETATTR (tty, tiop) < 0)
+    {
+      if (errno != EINTR)
+	return -1;
+      errno = 0;
+    }
+  return 0;
+}
+
+static int
+set_tty_settings (int tty, TIOTYPE *tiop)
+{
+  if (_set_tty_settings (tty, tiop) < 0)
+    return -1;
+    
+#if 0
+
+#if defined (TERMIOS_TTY_DRIVER)
+#  if defined (__ksr1__)
+  if (ksrflow)
+    {
+      ksrflow = 0;
+      tcflow (tty, TCOON);
+    }
+#  else /* !ksr1 */
+  tcflow (tty, TCOON);		/* Simulate a ^Q. */
+#  endif /* !ksr1 */
+#else
+  ioctl (tty, TCXONC, 1);	/* Simulate a ^Q. */
+#endif /* !TERMIOS_TTY_DRIVER */
+
+#endif /* 0 */
+
+  return 0;
+}
+
+static void
+prepare_terminal_settings (int meta_flag, TIOTYPE oldtio, TIOTYPE *tiop)
+{
+  int sc;
+  Keymap kmap;
+
+  _rl_echoing_p = (oldtio.c_lflag & ECHO);
+#if defined (ECHOCTL)
+  _rl_echoctl = (oldtio.c_lflag & ECHOCTL);
+#endif
+
+  tiop->c_lflag &= ~(ICANON | ECHO);
+
+  if ((unsigned char) oldtio.c_cc[VEOF] != (unsigned char) _POSIX_VDISABLE)
+    _rl_eof_char = oldtio.c_cc[VEOF];
+
+#if defined (USE_XON_XOFF)
+#if defined (IXANY)
+  tiop->c_iflag &= ~(IXON | IXANY);
+#else
+  /* `strict' Posix systems do not define IXANY. */
+  tiop->c_iflag &= ~IXON;
+#endif /* IXANY */
+#endif /* USE_XON_XOFF */
+
+  /* Only turn this off if we are using all 8 bits. */
+  if (((tiop->c_cflag & CSIZE) == CS8) || meta_flag)
+    tiop->c_iflag &= ~(ISTRIP | INPCK);
+
+  /* Make sure we differentiate between CR and NL on input. */
+  tiop->c_iflag &= ~(ICRNL | INLCR);
+
+#if !defined (HANDLE_SIGNALS)
+  tiop->c_lflag &= ~ISIG;
+#else
+  tiop->c_lflag |= ISIG;
+#endif
+
+  tiop->c_cc[VMIN] = 1;
+  tiop->c_cc[VTIME] = 0;
+
+#if defined (FLUSHO)
+  if (OUTPUT_BEING_FLUSHED (tiop))
+    {
+      tiop->c_lflag &= ~FLUSHO;
+      oldtio.c_lflag &= ~FLUSHO;
+    }
+#endif
+
+  /* Turn off characters that we need on Posix systems with job control,
+     just to be sure.  This includes ^Y and ^V.  This should not really
+     be necessary.  */
+#if defined (TERMIOS_TTY_DRIVER) && defined (_POSIX_VDISABLE)
+
+#if defined (VLNEXT)
+  tiop->c_cc[VLNEXT] = _POSIX_VDISABLE;
+#endif
+
+#if defined (VDSUSP)
+  tiop->c_cc[VDSUSP] = _POSIX_VDISABLE;
+#endif
+
+  /* Conditionally disable some other tty special characters if there is a
+     key binding for them in the current keymap.  Readline ordinarily doesn't
+     bind these characters, but an application or user might. */
+#if defined (VI_MODE)
+      kmap = (rl_editing_mode == vi_mode) ? vi_insertion_keymap : _rl_keymap;
+#else
+      kmap = _rl_keymap;
+#endif
+#if defined (VDISCARD)
+  sc = tiop->c_cc[VDISCARD];
+  if (sc != _POSIX_VDISABLE && kmap[(unsigned char)sc].type == ISFUNC)
+    tiop->c_cc[VDISCARD] = _POSIX_VDISABLE;
+#endif /* VDISCARD */
+
+#endif /* TERMIOS_TTY_DRIVER && _POSIX_VDISABLE */
+}
+#endif  /* !NEW_TTY_DRIVER */
+
+/* Put the terminal in CBREAK mode so that we can detect key presses. */
+#if defined (NO_TTY_DRIVER)
+void
+rl_prep_terminal (int meta_flag)
+{
+  _rl_echoing_p = 1;
+}
+
+void
+rl_deprep_terminal (void)
+{
+}
+
+#else /* ! NO_TTY_DRIVER */
+void
+rl_prep_terminal (int meta_flag)
+{
+  int tty, nprep;
+  TIOTYPE tio;
+
+  if (terminal_prepped)
+    return;
+
+  /* Try to keep this function from being INTerrupted. */
+  _rl_block_sigint ();
+
+  tty = rl_instream ? fileno (rl_instream) : fileno (stdin);
+
+  if (get_tty_settings (tty, &tio) < 0)
+    {
+#if defined (ENOTSUP)
+      /* MacOS X and Linux, at least, lie about the value of errno if
+	 tcgetattr fails. */
+      if (errno == ENOTTY || errno == EINVAL || errno == ENOTSUP)
+#else
+      if (errno == ENOTTY || errno == EINVAL)
+#endif
+	_rl_echoing_p = 1;		/* XXX */
+
+      _rl_release_sigint ();
+      return;
+    }
+
+  otio = tio;
+
+  if (_rl_bind_stty_chars)
+    {
+#if defined (VI_MODE)
+      /* If editing in vi mode, make sure we restore the bindings in the
+	 insertion keymap no matter what keymap we ended up in. */
+      if (rl_editing_mode == vi_mode)
+	rl_tty_unset_default_bindings (vi_insertion_keymap);
+      else
+#endif
+	rl_tty_unset_default_bindings (_rl_keymap);
+    }
+  save_tty_chars (&otio);
+  RL_SETSTATE(RL_STATE_TTYCSAVED);
+  if (_rl_bind_stty_chars)
+    {
+#if defined (VI_MODE)
+      /* If editing in vi mode, make sure we set the bindings in the
+	 insertion keymap no matter what keymap we ended up in. */
+      if (rl_editing_mode == vi_mode)
+	_rl_bind_tty_special_chars (vi_insertion_keymap, tio);
+      else
+#endif
+	_rl_bind_tty_special_chars (_rl_keymap, tio);
+    }
+
+  prepare_terminal_settings (meta_flag, otio, &tio);
+
+  if (set_tty_settings (tty, &tio) < 0)
+    {
+      _rl_release_sigint ();
+      return;
+    }
+
+  if (_rl_enable_keypad)
+    _rl_control_keypad (1);
+
+  nprep = TPX_PREPPED;
+
+  if (_rl_enable_bracketed_paste)
+    {
+      fprintf (rl_outstream, BRACK_PASTE_INIT);
+      nprep |= TPX_BRACKPASTE;
+    }
+
+  fflush (rl_outstream);
+  terminal_prepped = nprep;
+  RL_SETSTATE(RL_STATE_TERMPREPPED);
+
+  _rl_release_sigint ();
+}
+
+/* Restore the terminal's normal settings and modes. */
+void
+rl_deprep_terminal (void)
+{
+  int tty;
+
+  if (terminal_prepped == 0)
+    return;
+
+  /* Try to keep this function from being interrupted. */
+  _rl_block_sigint ();
+
+  tty = rl_instream ? fileno (rl_instream) : fileno (stdin);
+
+  if (terminal_prepped & TPX_BRACKPASTE)
+    {
+      fprintf (rl_outstream, BRACK_PASTE_FINI);
+      if (_rl_eof_found)
+ 	fprintf (rl_outstream, "\n");
+    }
+
+  if (_rl_enable_keypad)
+    _rl_control_keypad (0);
+
+  fflush (rl_outstream);
+
+  if (set_tty_settings (tty, &otio) < 0)
+    {
+      _rl_release_sigint ();
+      return;
+    }
+
+  terminal_prepped = 0;
+  RL_UNSETSTATE(RL_STATE_TERMPREPPED);
+
+  _rl_release_sigint ();
+}
+#endif /* !NO_TTY_DRIVER */
+
+/* Set readline's idea of whether or not it is echoing output to the terminal,
+   returning the old value. */
+int
+rl_tty_set_echoing (int u)
+{
+  int o;
+
+  o = _rl_echoing_p;
+  _rl_echoing_p = u;
+  return o;
+}
+
+/* **************************************************************** */
+/*								    */
+/*			Bogus Flow Control      		    */
+/*								    */
+/* **************************************************************** */
+
+int
+rl_restart_output (int count, int key)
+{
+#if defined (__MINGW32__)
+  return 0;
+#else /* !__MING32__ */
+
+  int fildes = fileno (rl_outstream);
+#if defined (TIOCSTART)
+#if defined (apollo)
+  ioctl (&fildes, TIOCSTART, 0);
+#else
+  ioctl (fildes, TIOCSTART, 0);
+#endif /* apollo */
+
+#else /* !TIOCSTART */
+#  if defined (TERMIOS_TTY_DRIVER)
+#    if defined (__ksr1__)
+  if (ksrflow)
+    {
+      ksrflow = 0;
+      tcflow (fildes, TCOON);
+    }
+#    else /* !ksr1 */
+  tcflow (fildes, TCOON);		/* Simulate a ^Q. */
+#    endif /* !ksr1 */
+#  else /* !TERMIOS_TTY_DRIVER */
+#    if defined (TCXONC)
+  ioctl (fildes, TCXONC, TCOON);
+#    endif /* TCXONC */
+#  endif /* !TERMIOS_TTY_DRIVER */
+#endif /* !TIOCSTART */
+
+  return 0;
+#endif /* !__MINGW32__ */
+}
+
+int
+rl_stop_output (int count, int key)
+{
+#if defined (__MINGW32__)
+  return 0;
+#else
+
+  int fildes = fileno (rl_instream);
+
+#if defined (TIOCSTOP)
+# if defined (apollo)
+  ioctl (&fildes, TIOCSTOP, 0);
+# else
+  ioctl (fildes, TIOCSTOP, 0);
+# endif /* apollo */
+#else /* !TIOCSTOP */
+# if defined (TERMIOS_TTY_DRIVER)
+#  if defined (__ksr1__)
+  ksrflow = 1;
+#  endif /* ksr1 */
+  tcflow (fildes, TCOOFF);
+# else
+#   if defined (TCXONC)
+  ioctl (fildes, TCXONC, TCOON);
+#   endif /* TCXONC */
+# endif /* !TERMIOS_TTY_DRIVER */
+#endif /* !TIOCSTOP */
+
+  return 0;
+#endif /* !__MINGW32__ */
+}
+
+/* **************************************************************** */
+/*								    */
+/*			Default Key Bindings			    */
+/*								    */
+/* **************************************************************** */
+
+#if !defined (NO_TTY_DRIVER)
+#define SET_SPECIAL(sc, func)	set_special_char(kmap, &ttybuff, sc, func)
+#endif
+
+#if defined (NO_TTY_DRIVER)
+
+#define SET_SPECIAL(sc, func)
+#define RESET_SPECIAL(c)
+
+#elif defined (NEW_TTY_DRIVER)
+static void
+set_special_char (Keymap kmap, TIOTYPE *tiop, int sc, rl_command_func_t *func)
+{
+  if (sc != -1 && kmap[(unsigned char)sc].type == ISFUNC)
+    kmap[(unsigned char)sc].function = func;
+}
+
+#define RESET_SPECIAL(c) \
+  if (c != -1 && kmap[(unsigned char)c].type == ISFUNC) \
+    kmap[(unsigned char)c].function = rl_insert;
+
+static void
+_rl_bind_tty_special_chars (Keymap kmap, TIOTYPE ttybuff)
+{
+  if (ttybuff.flags & SGTTY_SET)
+    {
+      SET_SPECIAL (ttybuff.sgttyb.sg_erase, rl_rubout);
+      SET_SPECIAL (ttybuff.sgttyb.sg_kill, rl_unix_line_discard);
+    }
+
+#  if defined (TIOCGLTC)
+  if (ttybuff.flags & LTCHARS_SET)
+    {
+      SET_SPECIAL (ttybuff.ltchars.t_werasc, rl_unix_word_rubout);
+      SET_SPECIAL (ttybuff.ltchars.t_lnextc, rl_quoted_insert);
+    }
+#  endif /* TIOCGLTC */
+}
+
+#else /* !NEW_TTY_DRIVER */
+static void
+set_special_char (Keymap kmap, TIOTYPE *tiop, int sc, rl_command_func_t *func)
+{
+  unsigned char uc;
+
+  uc = tiop->c_cc[sc];
+  if (uc != (unsigned char)_POSIX_VDISABLE && kmap[uc].type == ISFUNC)
+    kmap[uc].function = func;
+}
+
+/* used later */
+#define RESET_SPECIAL(uc) \
+  if (uc != (unsigned char)_POSIX_VDISABLE && kmap[uc].type == ISFUNC) \
+    kmap[uc].function = rl_insert;
+
+static void
+_rl_bind_tty_special_chars (Keymap kmap, TIOTYPE ttybuff)
+{
+  SET_SPECIAL (VERASE, rl_rubout);
+  SET_SPECIAL (VKILL, rl_unix_line_discard);
+
+#  if defined (VLNEXT) && defined (TERMIOS_TTY_DRIVER)
+  SET_SPECIAL (VLNEXT, rl_quoted_insert);
+#  endif /* VLNEXT && TERMIOS_TTY_DRIVER */
+
+#  if defined (VWERASE) && defined (TERMIOS_TTY_DRIVER)
+#    if defined (VI_MODE)
+  if (rl_editing_mode == vi_mode)
+    SET_SPECIAL (VWERASE, rl_vi_unix_word_rubout);
+  else
+#    endif
+  SET_SPECIAL (VWERASE, rl_unix_word_rubout);
+#  endif /* VWERASE && TERMIOS_TTY_DRIVER */
+}
+
+#endif /* !NEW_TTY_DRIVER */
+
+/* Set the system's default editing characters to their readline equivalents
+   in KMAP.  Should be static, now that we have rl_tty_set_default_bindings. */
+void
+rltty_set_default_bindings (Keymap kmap)
+{
+#if !defined (NO_TTY_DRIVER)
+  TIOTYPE ttybuff;
+  int tty;
+
+  tty = fileno (rl_instream);
+
+  if (get_tty_settings (tty, &ttybuff) == 0)
+    _rl_bind_tty_special_chars (kmap, ttybuff);
+#endif
+}
+
+/* New public way to set the system default editing chars to their readline
+   equivalents. */
+void
+rl_tty_set_default_bindings (Keymap kmap)
+{
+  rltty_set_default_bindings (kmap);
+}
+
+/* Rebind all of the tty special chars that readline worries about back
+   to self-insert.  Call this before saving the current terminal special
+   chars with save_tty_chars().  This only works on POSIX termios or termio
+   systems. */
+void
+rl_tty_unset_default_bindings (Keymap kmap)
+{
+  /* Don't bother before we've saved the tty special chars at least once. */
+  if (RL_ISSTATE(RL_STATE_TTYCSAVED) == 0)
+    return;
+
+  RESET_SPECIAL (_rl_tty_chars.t_erase);
+  RESET_SPECIAL (_rl_tty_chars.t_kill);
+
+#  if defined (VLNEXT) && defined (TERMIOS_TTY_DRIVER)
+  RESET_SPECIAL (_rl_tty_chars.t_lnext);
+#  endif /* VLNEXT && TERMIOS_TTY_DRIVER */
+
+#  if defined (VWERASE) && defined (TERMIOS_TTY_DRIVER)
+  RESET_SPECIAL (_rl_tty_chars.t_werase);
+#  endif /* VWERASE && TERMIOS_TTY_DRIVER */
+}
+
+#if defined (HANDLE_SIGNALS)
+
+#if defined (NEW_TTY_DRIVER) || defined (NO_TTY_DRIVER)
+int
+_rl_disable_tty_signals (void)
+{
+  return 0;
+}
+
+int
+_rl_restore_tty_signals (void)
+{
+  return 0;
+}
+#else
+
+static TIOTYPE sigstty, nosigstty;
+static int tty_sigs_disabled = 0;
+
+int
+_rl_disable_tty_signals (void)
+{
+  if (tty_sigs_disabled)
+    return 0;
+
+  if (_get_tty_settings (fileno (rl_instream), &sigstty) < 0)
+    return -1;
+
+  nosigstty = sigstty;
+
+  nosigstty.c_lflag &= ~ISIG;
+  nosigstty.c_iflag &= ~IXON;
+
+  if (_set_tty_settings (fileno (rl_instream), &nosigstty) < 0)
+    return (_set_tty_settings (fileno (rl_instream), &sigstty));
+
+  tty_sigs_disabled = 1;
+  return 0;
+}
+
+int
+_rl_restore_tty_signals (void)
+{
+  int r;
+
+  if (tty_sigs_disabled == 0)
+    return 0;
+
+  r = _set_tty_settings (fileno (rl_instream), &sigstty);
+
+  if (r == 0)
+    tty_sigs_disabled = 0;
+
+  return r;
+}
+#endif /* !NEW_TTY_DRIVER */
+
+#endif /* HANDLE_SIGNALS */
diff --git a/lib/readline/rltty.h b/lib/readline/rltty.h
new file mode 100644
index 0000000..5bcc946
--- /dev/null
+++ b/lib/readline/rltty.h
@@ -0,0 +1,80 @@
+/* rltty.h - tty driver-related definitions used by some library files. */
+
+/* Copyright (C) 1995-2009 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_RLTTY_H_)
+#define _RLTTY_H_
+
+/* Posix systems use termios and the Posix signal functions. */
+#if defined (TERMIOS_TTY_DRIVER)
+#  include <termios.h>
+#endif /* TERMIOS_TTY_DRIVER */
+
+/* System V machines use termio. */
+#if defined (TERMIO_TTY_DRIVER)
+#  include <termio.h>
+#  if !defined (TCOON)
+#    define TCOON 1
+#  endif
+#endif /* TERMIO_TTY_DRIVER */
+
+/* Other (BSD) machines use sgtty. */
+#if defined (NEW_TTY_DRIVER)
+#  include <sgtty.h>
+#endif
+
+#include "rlwinsize.h"
+
+/* Define _POSIX_VDISABLE if we are not using the `new' tty driver and
+   it is not already defined.  It is used both to determine if a
+   special character is disabled and to disable certain special
+   characters.  Posix systems should set to 0, USG systems to -1. */
+#if !defined (NEW_TTY_DRIVER) && !defined (_POSIX_VDISABLE)
+#  if defined (_SVR4_VDISABLE)
+#    define _POSIX_VDISABLE _SVR4_VDISABLE
+#  else
+#    if defined (_POSIX_VERSION)
+#      define _POSIX_VDISABLE 0
+#    else /* !_POSIX_VERSION */
+#      define _POSIX_VDISABLE -1
+#    endif /* !_POSIX_VERSION */
+#  endif /* !_SVR4_DISABLE */
+#endif /* !NEW_TTY_DRIVER && !_POSIX_VDISABLE */
+
+typedef struct _rl_tty_chars {
+  unsigned char t_eof;
+  unsigned char t_eol;
+  unsigned char t_eol2;
+  unsigned char t_erase;
+  unsigned char t_werase;
+  unsigned char t_kill;
+  unsigned char t_reprint;
+  unsigned char t_intr;
+  unsigned char t_quit;
+  unsigned char t_susp;
+  unsigned char t_dsusp;
+  unsigned char t_start;
+  unsigned char t_stop;
+  unsigned char t_lnext;
+  unsigned char t_flush;
+  unsigned char t_status;
+} _RL_TTY_CHARS;
+
+#endif /* _RLTTY_H_ */
diff --git a/lib/readline/rltypedefs.h b/lib/readline/rltypedefs.h
new file mode 100644
index 0000000..f9f5cd3
--- /dev/null
+++ b/lib/readline/rltypedefs.h
@@ -0,0 +1,100 @@
+/* rltypedefs.h -- Type declarations for readline functions. */
+
+/* Copyright (C) 2000-2011 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _RL_TYPEDEFS_H_
+#define _RL_TYPEDEFS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Old-style, attempt to mark as deprecated in some way people will notice. */
+
+#if !defined (_FUNCTION_DEF)
+#  define _FUNCTION_DEF
+
+#if defined(__GNUC__) || defined(__clang__)
+typedef int Function () __attribute__ ((deprecated));
+typedef void VFunction () __attribute__ ((deprecated));
+typedef char *CPFunction () __attribute__ ((deprecated));
+typedef char **CPPFunction () __attribute__ ((deprecated));
+#else
+typedef int Function ();
+typedef void VFunction ();
+typedef char *CPFunction ();
+typedef char **CPPFunction ();
+#endif
+
+#endif /* _FUNCTION_DEF */
+
+/* New style. */
+
+#if !defined (_RL_FUNCTION_TYPEDEF)
+#  define _RL_FUNCTION_TYPEDEF
+
+/* Bindable functions */
+typedef int rl_command_func_t PARAMS((int, int));
+
+/* Typedefs for the completion system */
+typedef char *rl_compentry_func_t PARAMS((const char *, int));
+typedef char **rl_completion_func_t PARAMS((const char *, int, int));
+
+typedef char *rl_quote_func_t PARAMS((char *, int, char *));
+typedef char *rl_dequote_func_t PARAMS((char *, int));
+
+typedef int rl_compignore_func_t PARAMS((char **));
+
+typedef void rl_compdisp_func_t PARAMS((char **, int, int));
+
+/* Type for input and pre-read hook functions like rl_event_hook */
+typedef int rl_hook_func_t PARAMS((void));
+
+/* Input function type */
+typedef int rl_getc_func_t PARAMS((FILE *));
+
+/* Generic function that takes a character buffer (which could be the readline
+   line buffer) and an index into it (which could be rl_point) and returns
+   an int. */
+typedef int rl_linebuf_func_t PARAMS((char *, int));
+
+/* `Generic' function pointer typedefs */
+typedef int rl_intfunc_t PARAMS((int));
+#define rl_ivoidfunc_t rl_hook_func_t
+typedef int rl_icpfunc_t PARAMS((char *));
+typedef int rl_icppfunc_t PARAMS((char **));
+
+typedef void rl_voidfunc_t PARAMS((void));
+typedef void rl_vintfunc_t PARAMS((int));
+typedef void rl_vcpfunc_t PARAMS((char *));
+typedef void rl_vcppfunc_t PARAMS((char **));
+
+typedef char *rl_cpvfunc_t PARAMS((void));
+typedef char *rl_cpifunc_t PARAMS((int));
+typedef char *rl_cpcpfunc_t PARAMS((char  *));
+typedef char *rl_cpcppfunc_t PARAMS((char  **));
+
+#endif /* _RL_FUNCTION_TYPEDEF */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RL_TYPEDEFS_H_ */
diff --git a/lib/readline/rlwinsize.h b/lib/readline/rlwinsize.h
new file mode 100644
index 0000000..d198fcf
--- /dev/null
+++ b/lib/readline/rlwinsize.h
@@ -0,0 +1,58 @@
+/* rlwinsize.h -- an attempt to isolate some of the system-specific defines
+   for `struct winsize' and TIOCGWINSZ. */
+
+/* Copyright (C) 1997-2009 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_RLWINSIZE_H_)
+#define _RLWINSIZE_H_
+
+#if defined (HAVE_CONFIG_H)
+#  include "config.h"
+#endif
+
+/* Try to find the definitions of `struct winsize' and TIOGCWINSZ */
+
+#if defined (GWINSZ_IN_SYS_IOCTL) && !defined (TIOCGWINSZ)
+#  include <sys/ioctl.h>
+#endif /* GWINSZ_IN_SYS_IOCTL && !TIOCGWINSZ */
+
+#if defined (STRUCT_WINSIZE_IN_TERMIOS) && !defined (STRUCT_WINSIZE_IN_SYS_IOCTL)
+#  include <termios.h>
+#endif /* STRUCT_WINSIZE_IN_TERMIOS && !STRUCT_WINSIZE_IN_SYS_IOCTL */
+
+/* Not in either of the standard places, look around. */
+#if !defined (STRUCT_WINSIZE_IN_TERMIOS) && !defined (STRUCT_WINSIZE_IN_SYS_IOCTL)
+#  if defined (HAVE_SYS_STREAM_H)
+#    include <sys/stream.h>
+#  endif /* HAVE_SYS_STREAM_H */
+#  if defined (HAVE_SYS_PTEM_H) /* SVR4.2, at least, has it here */
+#    include <sys/ptem.h>
+#    define _IO_PTEM_H          /* work around SVR4.2 1.1.4 bug */
+#  endif /* HAVE_SYS_PTEM_H */
+#  if defined (HAVE_SYS_PTE_H)  /* ??? */
+#    include <sys/pte.h>
+#  endif /* HAVE_SYS_PTE_H */
+#endif /* !STRUCT_WINSIZE_IN_TERMIOS && !STRUCT_WINSIZE_IN_SYS_IOCTL */
+
+#if defined (M_UNIX) && !defined (_SCO_DS) && !defined (tcflow)
+#  define tcflow(fd, action)	ioctl(fd, TCXONC, action)
+#endif
+
+#endif /* _RL_WINSIZE_H */
diff --git a/lib/readline/savestring.c b/lib/readline/savestring.c
new file mode 100644
index 0000000..f4bb6aa
--- /dev/null
+++ b/lib/readline/savestring.c
@@ -0,0 +1,40 @@
+/* savestring.c - function version of savestring for backwards compatibility */
+
+/* Copyright (C) 1998,2003,2017 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#include <config.h>
+#ifdef HAVE_STRING_H
+#  include <string.h>
+#endif
+#include "xmalloc.h"
+
+/* Backwards compatibility, now that savestring has been removed from
+   all `public' readline header files. */
+char *
+savestring (const char *s)
+{
+  char *ret;
+
+  ret = (char *)xmalloc (strlen (s) + 1);
+  strcpy (ret, s);
+  return ret;
+}
diff --git a/lib/readline/search.c b/lib/readline/search.c
new file mode 100644
index 0000000..38a2936
--- /dev/null
+++ b/lib/readline/search.c
@@ -0,0 +1,695 @@
+/* search.c - code for non-incremental searching in emacs and vi modes. */
+
+/* Copyright (C) 1992-2020 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <sys/types.h>
+#include <stdio.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif
+
+#include "rldefs.h"
+#include "rlmbutil.h"
+
+#include "readline.h"
+#include "history.h"
+#include "histlib.h"
+
+#include "rlprivate.h"
+#include "xmalloc.h"
+
+#ifdef abs
+#  undef abs
+#endif
+#define abs(x)		(((x) >= 0) ? (x) : -(x))
+
+_rl_search_cxt *_rl_nscxt = 0;
+
+extern HIST_ENTRY *_rl_saved_line_for_history;
+
+/* Functions imported from the rest of the library. */
+extern void _rl_free_history_entry PARAMS((HIST_ENTRY *));
+
+static char *noninc_search_string = (char *) NULL;
+static int noninc_history_pos;
+
+static char *prev_line_found = (char *) NULL;
+
+static int rl_history_search_len;
+static int rl_history_search_pos;
+static int rl_history_search_flags;
+
+static char *history_search_string;
+static int history_string_size;
+
+static void make_history_line_current PARAMS((HIST_ENTRY *));
+static int noninc_search_from_pos PARAMS((char *, int, int, int, int *));
+static int noninc_dosearch PARAMS((char *, int, int));
+static int noninc_search PARAMS((int, int));
+static int rl_history_search_internal PARAMS((int, int));
+static void rl_history_search_reinit PARAMS((int));
+
+static _rl_search_cxt *_rl_nsearch_init PARAMS((int, int));
+static void _rl_nsearch_abort PARAMS((_rl_search_cxt *));
+static int _rl_nsearch_dispatch PARAMS((_rl_search_cxt *, int));
+
+/* Make the data from the history entry ENTRY be the contents of the
+   current line.  This doesn't do anything with rl_point; the caller
+   must set it. */
+static void
+make_history_line_current (HIST_ENTRY *entry)
+{
+  _rl_replace_text (entry->line, 0, rl_end);
+  _rl_fix_point (1);
+#if defined (VI_MODE)
+  if (rl_editing_mode == vi_mode)
+    /* POSIX.2 says that the `U' command doesn't affect the copy of any
+       command lines to the edit line.  We're going to implement that by
+       making the undo list start after the matching line is copied to the
+       current editing buffer. */
+    rl_free_undo_list ();
+#endif
+
+  if (_rl_saved_line_for_history)
+    _rl_free_history_entry (_rl_saved_line_for_history);
+  _rl_saved_line_for_history = (HIST_ENTRY *)NULL;
+}
+
+/* Search the history list for STRING starting at absolute history position
+   POS.  If STRING begins with `^', the search must match STRING at the
+   beginning of a history line, otherwise a full substring match is performed
+   for STRING.  DIR < 0 means to search backwards through the history list,
+   DIR >= 0 means to search forward. */
+static int
+noninc_search_from_pos (char *string, int pos, int dir, int flags, int *ncp)
+{
+  int ret, old, sflags;
+  char *s;
+
+  if (pos < 0)
+    return -1;
+
+  old = where_history ();
+  if (history_set_pos (pos) == 0)
+    return -1;
+
+  RL_SETSTATE(RL_STATE_SEARCH);
+  /* These functions return the match offset in the line; history_offset gives
+     the matching line in the history list */
+  if (flags & SF_PATTERN)
+    {
+      s = string;
+      sflags = 0;		/* Non-anchored search */
+      if (*s == '^')
+	{
+	  sflags |= ANCHORED_SEARCH;
+	  s++;
+	}
+      ret = _hs_history_patsearch (s, dir, sflags);
+    }
+  else if (*string == '^')
+    ret = history_search_prefix (string + 1, dir);
+  else
+    ret = history_search (string, dir);
+  RL_UNSETSTATE(RL_STATE_SEARCH);
+
+  if (ncp)
+    *ncp = ret;		/* caller will catch -1 to indicate no-op */
+
+  if (ret != -1)
+    ret = where_history ();
+
+  history_set_pos (old);
+  return (ret);
+}
+
+/* Search for a line in the history containing STRING.  If DIR is < 0, the
+   search is backwards through previous entries, else through subsequent
+   entries.  Returns 1 if the search was successful, 0 otherwise. */
+static int
+noninc_dosearch (char *string, int dir, int flags)
+{
+  int oldpos, pos, ind;
+  HIST_ENTRY *entry;
+
+  if (string == 0 || *string == '\0' || noninc_history_pos < 0)
+    {
+      rl_ding ();
+      return 0;
+    }
+
+  pos = noninc_search_from_pos (string, noninc_history_pos + dir, dir, flags, &ind);
+  if (pos == -1)
+    {
+      /* Search failed, current history position unchanged. */
+      rl_maybe_unsave_line ();
+      rl_clear_message ();
+      rl_point = 0;
+      rl_ding ();
+      return 0;
+    }
+
+  noninc_history_pos = pos;
+
+  oldpos = where_history ();
+  history_set_pos (noninc_history_pos);
+  entry = current_history ();		/* will never be NULL after successful search */
+  
+#if defined (VI_MODE)
+  if (rl_editing_mode != vi_mode)
+#endif
+    history_set_pos (oldpos);
+
+  make_history_line_current (entry);
+
+  if (_rl_enable_active_region && ((flags & SF_PATTERN) == 0) && ind > 0 && ind < rl_end)
+    {
+      rl_point = ind;
+      rl_mark = ind + strlen (string);
+      if (rl_mark > rl_end)
+	rl_mark = rl_end;	/* can't happen? */
+      rl_activate_mark ();
+    }
+  else
+    {  
+      rl_point = 0;
+      rl_mark = rl_end;
+    }
+
+  rl_clear_message ();
+  return 1;
+}
+
+static _rl_search_cxt *
+_rl_nsearch_init (int dir, int pchar)
+{
+  _rl_search_cxt *cxt;
+  char *p;
+
+  cxt = _rl_scxt_alloc (RL_SEARCH_NSEARCH, 0);
+  if (dir < 0)
+    cxt->sflags |= SF_REVERSE;		/* not strictly needed */
+#if defined (VI_MODE)
+  if (VI_COMMAND_MODE() && (pchar == '?' || pchar == '/'))
+    cxt->sflags |= SF_PATTERN;
+#endif
+
+  cxt->direction = dir;
+  cxt->history_pos = cxt->save_line;
+
+  rl_maybe_save_line ();
+
+  /* Clear the undo list, since reading the search string should create its
+     own undo list, and the whole list will end up being freed when we
+     finish reading the search string. */
+  rl_undo_list = 0;
+
+  /* Use the line buffer to read the search string. */
+  rl_line_buffer[0] = 0;
+  rl_end = rl_point = 0;
+
+  p = _rl_make_prompt_for_search (pchar ? pchar : ':');
+  rl_message ("%s", p);
+  xfree (p);
+
+  RL_SETSTATE(RL_STATE_NSEARCH);
+
+  _rl_nscxt = cxt;
+
+  return cxt;
+}
+
+int
+_rl_nsearch_cleanup (_rl_search_cxt *cxt, int r)
+{
+  _rl_scxt_dispose (cxt, 0);
+  _rl_nscxt = 0;
+
+  RL_UNSETSTATE(RL_STATE_NSEARCH);
+
+  return (r != 1);
+}
+
+static void
+_rl_nsearch_abort (_rl_search_cxt *cxt)
+{
+  rl_maybe_unsave_line ();
+  rl_clear_message ();
+  rl_point = cxt->save_point;
+  rl_mark = cxt->save_mark;
+  _rl_fix_point (1);
+  rl_restore_prompt ();
+
+  RL_UNSETSTATE (RL_STATE_NSEARCH);
+}
+
+/* Process just-read character C according to search context CXT.  Return -1
+   if the caller should abort the search, 0 if we should break out of the
+   loop, and 1 if we should continue to read characters. */
+static int
+_rl_nsearch_dispatch (_rl_search_cxt *cxt, int c)
+{
+  int n;
+
+  if (c < 0)
+    c = CTRL ('C');  
+
+  switch (c)
+    {
+    case CTRL('W'):
+      rl_unix_word_rubout (1, c);
+      break;
+
+    case CTRL('U'):
+      rl_unix_line_discard (1, c);
+      break;
+
+    case RETURN:
+    case NEWLINE:
+      return 0;
+
+    case CTRL('H'):
+    case RUBOUT:
+      if (rl_point == 0)
+	{
+	  _rl_nsearch_abort (cxt);
+	  return -1;
+	}
+      _rl_rubout_char (1, c);
+      break;
+
+    case CTRL('C'):
+    case CTRL('G'):
+      rl_ding ();
+      _rl_nsearch_abort (cxt);
+      return -1;
+
+    case ESC:
+      /* XXX - experimental code to allow users to bracketed-paste into the
+	 search string. Similar code is in isearch.c:_rl_isearch_dispatch().
+	 The difference here is that the bracketed paste sometimes doesn't
+	 paste everything, so checking for the prefix and the suffix in the
+	 input queue doesn't work well. We just have to check to see if the
+	 number of chars in the input queue is enough for the bracketed paste
+	 prefix and hope for the best. */
+      if (_rl_enable_bracketed_paste && ((n = _rl_nchars_available ()) >= (BRACK_PASTE_SLEN-1)))
+	{
+	  if (_rl_read_bracketed_paste_prefix (c) == 1)
+	    rl_bracketed_paste_begin (1, c);
+	  else
+	    {
+	      c = rl_read_key ();	/* get the ESC that got pushed back */
+	      _rl_insert_char (1, c);
+	    }
+        }
+      else
+        _rl_insert_char (1, c);
+      break;
+
+    default:
+#if defined (HANDLE_MULTIBYTE)
+      if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+	rl_insert_text (cxt->mb);
+      else
+#endif
+	_rl_insert_char (1, c);
+      break;
+    }
+
+  (*rl_redisplay_function) ();
+  rl_deactivate_mark ();
+  return 1;
+}
+
+/* Perform one search according to CXT, using NONINC_SEARCH_STRING.  Return
+   -1 if the search should be aborted, any other value means to clean up
+   using _rl_nsearch_cleanup ().  Returns 1 if the search was successful,
+   0 otherwise. */
+static int
+_rl_nsearch_dosearch (_rl_search_cxt *cxt)
+{
+  rl_mark = cxt->save_mark;
+
+  /* If rl_point == 0, we want to re-use the previous search string and
+     start from the saved history position.  If there's no previous search
+     string, punt. */
+  if (rl_point == 0)
+    {
+      if (noninc_search_string == 0)
+	{
+	  rl_ding ();
+	  rl_restore_prompt ();
+	  RL_UNSETSTATE (RL_STATE_NSEARCH);
+	  return -1;
+	}
+    }
+  else
+    {
+      /* We want to start the search from the current history position. */
+      noninc_history_pos = cxt->save_line;
+      FREE (noninc_search_string);
+      noninc_search_string = savestring (rl_line_buffer);
+
+      /* If we don't want the subsequent undo list generated by the search
+	 matching a history line to include the contents of the search string,
+	 we need to clear rl_line_buffer here.  For now, we just clear the
+	 undo list generated by reading the search string.  (If the search
+	 fails, the old undo list will be restored by rl_maybe_unsave_line.) */
+      rl_free_undo_list ();
+    }
+
+  rl_restore_prompt ();
+  return (noninc_dosearch (noninc_search_string, cxt->direction, cxt->sflags&SF_PATTERN));
+}
+
+/* Search non-interactively through the history list.  DIR < 0 means to
+   search backwards through the history of previous commands; otherwise
+   the search is for commands subsequent to the current position in the
+   history list.  PCHAR is the character to use for prompting when reading
+   the search string; if not specified (0), it defaults to `:'. */
+static int
+noninc_search (int dir, int pchar)
+{
+  _rl_search_cxt *cxt;
+  int c, r;
+
+  cxt = _rl_nsearch_init (dir, pchar);
+
+  if (RL_ISSTATE (RL_STATE_CALLBACK))
+    return (0);
+
+  /* Read the search string. */
+  r = 0;
+  while (1)
+    {
+      c = _rl_search_getchar (cxt);
+
+      if (c < 0)
+	{
+	  _rl_nsearch_abort (cxt);
+	  return 1;
+	}
+	  
+      if (c == 0)
+	break;
+
+      r = _rl_nsearch_dispatch (cxt, c);
+      if (r < 0)
+        return 1;
+      else if (r == 0)
+	break;        
+    }
+
+  r = _rl_nsearch_dosearch (cxt);
+  return ((r >= 0) ? _rl_nsearch_cleanup (cxt, r) : (r != 1));
+}
+
+/* Search forward through the history list for a string.  If the vi-mode
+   code calls this, KEY will be `?'. */
+int
+rl_noninc_forward_search (int count, int key)
+{
+  return noninc_search (1, (key == '?') ? '?' : 0);
+}
+
+/* Reverse search the history list for a string.  If the vi-mode code
+   calls this, KEY will be `/'. */
+int
+rl_noninc_reverse_search (int count, int key)
+{
+  return noninc_search (-1, (key == '/') ? '/' : 0);
+}
+
+/* Search forward through the history list for the last string searched
+   for.  If there is no saved search string, abort.  If the vi-mode code
+   calls this, KEY will be `N'. */
+int
+rl_noninc_forward_search_again (int count, int key)
+{
+  int r;
+
+  if (!noninc_search_string)
+    {
+      rl_ding ();
+      return (1);
+    }
+#if defined (VI_MODE)
+  if (VI_COMMAND_MODE() && key == 'N')
+    r = noninc_dosearch (noninc_search_string, 1, SF_PATTERN);
+  else
+#endif
+    r = noninc_dosearch (noninc_search_string, 1, 0);
+  return (r != 1);
+}
+
+/* Reverse search in the history list for the last string searched
+   for.  If there is no saved search string, abort.  If the vi-mode code
+   calls this, KEY will be `n'. */
+int
+rl_noninc_reverse_search_again (int count, int key)
+{
+  int r;
+
+  if (!noninc_search_string)
+    {
+      rl_ding ();
+      return (1);
+    }
+#if defined (VI_MODE)
+  if (VI_COMMAND_MODE() && key == 'n')
+    r = noninc_dosearch (noninc_search_string, -1, SF_PATTERN);
+  else
+#endif
+    r = noninc_dosearch (noninc_search_string, -1, 0);
+  return (r != 1);
+}
+
+#if defined (READLINE_CALLBACKS)
+int
+_rl_nsearch_callback (_rl_search_cxt *cxt)
+{
+  int c, r;
+
+  c = _rl_search_getchar (cxt);
+  if (c <= 0)
+    {
+      if (c < 0)
+        _rl_nsearch_abort (cxt);
+      return 1;
+    }
+  r = _rl_nsearch_dispatch (cxt, c);
+  if (r != 0)
+    return 1;
+
+  r = _rl_nsearch_dosearch (cxt);
+  return ((r >= 0) ? _rl_nsearch_cleanup (cxt, r) : (r != 1));
+}
+#endif
+  
+static int
+rl_history_search_internal (int count, int dir)
+{
+  HIST_ENTRY *temp;
+  int ret, oldpos, newcol;
+  char *t;
+
+  rl_maybe_save_line ();
+  temp = (HIST_ENTRY *)NULL;
+
+  /* Search COUNT times through the history for a line matching
+     history_search_string.  If history_search_string[0] == '^', the
+     line must match from the start; otherwise any substring can match.
+     When this loop finishes, TEMP, if non-null, is the history line to
+     copy into the line buffer. */
+  while (count)
+    {
+      RL_CHECK_SIGNALS ();
+      ret = noninc_search_from_pos (history_search_string, rl_history_search_pos + dir, dir, 0, &newcol);
+      if (ret == -1)
+	break;
+
+      /* Get the history entry we found. */
+      rl_history_search_pos = ret;
+      oldpos = where_history ();
+      history_set_pos (rl_history_search_pos);
+      temp = current_history ();	/* will never be NULL after successful search */
+      history_set_pos (oldpos);
+
+      /* Don't find multiple instances of the same line. */
+      if (prev_line_found && STREQ (prev_line_found, temp->line))
+        continue;
+      prev_line_found = temp->line;
+      count--;
+    }
+
+  /* If we didn't find anything at all, return. */
+  if (temp == 0)
+    {
+      rl_maybe_unsave_line ();
+      rl_ding ();
+      /* If you don't want the saved history line (last match) to show up
+         in the line buffer after the search fails, change the #if 0 to
+         #if 1 */
+#if 0
+      if (rl_point > rl_history_search_len)
+        {
+          rl_point = rl_end = rl_history_search_len;
+          rl_line_buffer[rl_end] = '\0';
+          rl_mark = 0;
+        }
+#else
+      rl_point = rl_history_search_len;	/* rl_maybe_unsave_line changes it */
+      rl_mark = rl_end;
+#endif
+      return 1;
+    }
+
+  /* Copy the line we found into the current line buffer. */
+  make_history_line_current (temp);
+
+  /* decide where to put rl_point -- need to change this for pattern search */
+  if (rl_history_search_flags & ANCHORED_SEARCH)
+    rl_point = rl_history_search_len;	/* easy case */
+  else
+    {
+#if 0
+      t = strstr (rl_line_buffer, history_search_string);	/* XXX */
+      rl_point = t ? (int)(t - rl_line_buffer) + rl_history_search_len : rl_end;
+#else
+      rl_point = (newcol >= 0) ? newcol : rl_end;
+#endif
+    }
+  rl_mark = rl_end;
+
+  return 0;
+}
+
+static void
+rl_history_search_reinit (int flags)
+{
+  int sind;
+
+  rl_history_search_pos = where_history ();
+  rl_history_search_len = rl_point;
+  rl_history_search_flags = flags;
+
+  prev_line_found = (char *)NULL;
+  if (rl_point)
+    {
+      /* Allocate enough space for anchored and non-anchored searches */
+      if (rl_history_search_len >= history_string_size - 2)
+	{
+	  history_string_size = rl_history_search_len + 2;
+	  history_search_string = (char *)xrealloc (history_search_string, history_string_size);
+	}
+      sind = 0;
+      if (flags & ANCHORED_SEARCH)
+	history_search_string[sind++] = '^';
+      strncpy (history_search_string + sind, rl_line_buffer, rl_point);
+      history_search_string[rl_point + sind] = '\0';
+    }
+  _rl_free_saved_history_line ();
+}
+
+/* Search forward in the history for the string of characters
+   from the start of the line to rl_point.  This is a non-incremental
+   search.  The search is anchored to the beginning of the history line. */
+int
+rl_history_search_forward (int count, int ignore)
+{
+  if (count == 0)
+    return (0);
+
+  if (rl_last_func != rl_history_search_forward &&
+      rl_last_func != rl_history_search_backward)
+    rl_history_search_reinit (ANCHORED_SEARCH);
+
+  if (rl_history_search_len == 0)
+    return (rl_get_next_history (count, ignore));
+  return (rl_history_search_internal (abs (count), (count > 0) ? 1 : -1));
+}
+
+/* Search backward through the history for the string of characters
+   from the start of the line to rl_point.  This is a non-incremental
+   search. */
+int
+rl_history_search_backward (int count, int ignore)
+{
+  if (count == 0)
+    return (0);
+
+  if (rl_last_func != rl_history_search_forward &&
+      rl_last_func != rl_history_search_backward)
+    rl_history_search_reinit (ANCHORED_SEARCH);
+
+  if (rl_history_search_len == 0)
+    return (rl_get_previous_history (count, ignore));
+  return (rl_history_search_internal (abs (count), (count > 0) ? -1 : 1));
+}
+
+/* Search forward in the history for the string of characters
+   from the start of the line to rl_point.  This is a non-incremental
+   search.  The search succeeds if the search string is present anywhere
+   in the history line. */
+int
+rl_history_substr_search_forward (int count, int ignore)
+{
+  if (count == 0)
+    return (0);
+
+  if (rl_last_func != rl_history_substr_search_forward &&
+      rl_last_func != rl_history_substr_search_backward)
+    rl_history_search_reinit (NON_ANCHORED_SEARCH);
+
+  if (rl_history_search_len == 0)
+    return (rl_get_next_history (count, ignore));
+  return (rl_history_search_internal (abs (count), (count > 0) ? 1 : -1));
+}
+
+/* Search backward through the history for the string of characters
+   from the start of the line to rl_point.  This is a non-incremental
+   search. */
+int
+rl_history_substr_search_backward (int count, int ignore)
+{
+  if (count == 0)
+    return (0);
+
+  if (rl_last_func != rl_history_substr_search_forward &&
+      rl_last_func != rl_history_substr_search_backward)
+    rl_history_search_reinit (NON_ANCHORED_SEARCH);
+
+  if (rl_history_search_len == 0)
+    return (rl_get_previous_history (count, ignore));
+  return (rl_history_search_internal (abs (count), (count > 0) ? -1 : 1));
+}
diff --git a/lib/readline/shell.c b/lib/readline/shell.c
new file mode 100644
index 0000000..7fe2e97
--- /dev/null
+++ b/lib/readline/shell.c
@@ -0,0 +1,214 @@
+/* shell.c -- readline utility functions that are normally provided by
+	      bash when readline is linked as part of the shell. */
+
+/* Copyright (C) 1997-2009,2017 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <sys/types.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif /* HAVE_UNISTD_H */
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#if defined (HAVE_STRING_H)
+#  include <string.h>
+#else
+#  include <strings.h>
+#endif /* !HAVE_STRING_H */
+
+#if defined (HAVE_LIMITS_H)
+#  include <limits.h>
+#endif
+
+#if defined (HAVE_FCNTL_H)
+#include <fcntl.h>
+#endif
+#if defined (HAVE_PWD_H)
+#include <pwd.h>
+#endif
+
+#include <stdio.h>
+
+#include "rlstdc.h"
+#include "rlshell.h"
+#include "rldefs.h"
+
+#include "xmalloc.h"
+
+#if defined (HAVE_GETPWUID) && !defined (HAVE_GETPW_DECLS)
+extern struct passwd *getpwuid PARAMS((uid_t));
+#endif /* HAVE_GETPWUID && !HAVE_GETPW_DECLS */
+
+#ifndef NULL
+#  define NULL 0
+#endif
+
+#ifndef CHAR_BIT
+#  define CHAR_BIT 8
+#endif
+
+/* Nonzero if the integer type T is signed.  */
+#define TYPE_SIGNED(t) (! ((t) 0 < (t) -1))
+
+/* Bound on length of the string representing an integer value of type T.
+   Subtract one for the sign bit if T is signed;
+   302 / 1000 is log10 (2) rounded up;
+   add one for integer division truncation;
+   add one more for a minus sign if t is signed.  */
+#define INT_STRLEN_BOUND(t) \
+  ((sizeof (t) * CHAR_BIT - TYPE_SIGNED (t)) * 302 / 1000 \
+   + 1 + TYPE_SIGNED (t))
+
+/* All of these functions are resolved from bash if we are linking readline
+   as part of bash. */
+
+/* Does shell-like quoting using single quotes. */
+char *
+sh_single_quote (char *string)
+{
+  register int c;
+  char *result, *r, *s;
+
+  result = (char *)xmalloc (3 + (4 * strlen (string)));
+  r = result;
+  *r++ = '\'';
+
+  for (s = string; s && (c = *s); s++)
+    {
+      *r++ = c;
+
+      if (c == '\'')
+	{
+	  *r++ = '\\';	/* insert escaped single quote */
+	  *r++ = '\'';
+	  *r++ = '\'';	/* start new quoted string */
+	}
+    }
+
+  *r++ = '\'';
+  *r = '\0';
+
+  return (result);
+}
+
+/* Set the environment variables LINES and COLUMNS to lines and cols,
+   respectively. */
+static char setenv_buf[INT_STRLEN_BOUND (int) + 1];
+static char putenv_buf1[INT_STRLEN_BOUND (int) + 6 + 1];	/* sizeof("LINES=") == 6 */
+static char putenv_buf2[INT_STRLEN_BOUND (int) + 8 + 1];	/* sizeof("COLUMNS=") == 8 */
+
+void
+sh_set_lines_and_columns (int lines, int cols)
+{
+#if defined (HAVE_SETENV)
+  sprintf (setenv_buf, "%d", lines);
+  setenv ("LINES", setenv_buf, 1);
+
+  sprintf (setenv_buf, "%d", cols);
+  setenv ("COLUMNS", setenv_buf, 1);
+#else /* !HAVE_SETENV */
+#  if defined (HAVE_PUTENV)
+  sprintf (putenv_buf1, "LINES=%d", lines);
+  putenv (putenv_buf1);
+
+  sprintf (putenv_buf2, "COLUMNS=%d", cols);
+  putenv (putenv_buf2);
+#  endif /* HAVE_PUTENV */
+#endif /* !HAVE_SETENV */
+}
+
+char *
+sh_get_env_value (const char *varname)
+{
+  return ((char *)getenv (varname));
+}
+
+char *
+sh_get_home_dir (void)
+{
+  static char *home_dir = (char *)NULL;
+  struct passwd *entry;
+
+  if (home_dir)
+    return (home_dir);
+
+  home_dir = (char *)NULL;
+#if defined (HAVE_GETPWUID)
+#  if defined (__TANDEM)
+  entry = getpwnam (getlogin ());
+#  else
+  entry = getpwuid (getuid ());
+#  endif
+  if (entry)
+    home_dir = savestring (entry->pw_dir);
+#endif
+
+#if defined (HAVE_GETPWENT)
+  endpwent ();		/* some systems need this */
+#endif
+
+  return (home_dir);
+}
+
+#if !defined (O_NDELAY)
+#  if defined (FNDELAY)
+#    define O_NDELAY FNDELAY
+#  endif
+#endif
+
+int
+sh_unset_nodelay_mode (int fd)
+{
+#if defined (HAVE_FCNTL)
+  int flags, bflags;
+
+  if ((flags = fcntl (fd, F_GETFL, 0)) < 0)
+    return -1;
+
+  bflags = 0;
+
+#ifdef O_NONBLOCK
+  bflags |= O_NONBLOCK;
+#endif
+
+#ifdef O_NDELAY
+  bflags |= O_NDELAY;
+#endif
+
+  if (flags & bflags)
+    {
+      flags &= ~bflags;
+      return (fcntl (fd, F_SETFL, flags));
+    }
+#endif
+
+  return 0;
+}
diff --git a/lib/readline/signals.c b/lib/readline/signals.c
new file mode 100644
index 0000000..f9174ab
--- /dev/null
+++ b/lib/readline/signals.c
@@ -0,0 +1,779 @@
+/* signals.c -- signal handling support for readline. */
+
+/* Copyright (C) 1987-2017 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <stdio.h>		/* Just for NULL.  Yuck. */
+#include <sys/types.h>
+#include <signal.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif /* HAVE_UNISTD_H */
+
+/* System-specific feature definitions and include files. */
+#include "rldefs.h"
+
+#if defined (GWINSZ_IN_SYS_IOCTL)
+#  include <sys/ioctl.h>
+#endif /* GWINSZ_IN_SYS_IOCTL */
+
+/* Some standard library routines. */
+#include "readline.h"
+#include "history.h"
+
+#include "rlprivate.h"
+
+#if defined (HANDLE_SIGNALS)
+
+#if !defined (RETSIGTYPE)
+#  if defined (VOID_SIGHANDLER)
+#    define RETSIGTYPE void
+#  else
+#    define RETSIGTYPE int
+#  endif /* !VOID_SIGHANDLER */
+#endif /* !RETSIGTYPE */
+
+#if defined (VOID_SIGHANDLER)
+#  define SIGHANDLER_RETURN return
+#else
+#  define SIGHANDLER_RETURN return (0)
+#endif
+
+/* This typedef is equivalent to the one for Function; it allows us
+   to say SigHandler *foo = signal (SIGKILL, SIG_IGN); */
+typedef RETSIGTYPE SigHandler ();
+
+#if defined (HAVE_POSIX_SIGNALS)
+typedef struct sigaction sighandler_cxt;
+#  define rl_sigaction(s, nh, oh)	sigaction(s, nh, oh)
+#else
+typedef struct { SigHandler *sa_handler; int sa_mask, sa_flags; } sighandler_cxt;
+#  define sigemptyset(m)
+#endif /* !HAVE_POSIX_SIGNALS */
+
+#ifndef SA_RESTART
+#  define SA_RESTART 0
+#endif
+
+static SigHandler *rl_set_sighandler PARAMS((int, SigHandler *, sighandler_cxt *));
+static void rl_maybe_set_sighandler PARAMS((int, SigHandler *, sighandler_cxt *));
+static void rl_maybe_restore_sighandler PARAMS((int, sighandler_cxt *));
+
+static RETSIGTYPE rl_signal_handler PARAMS((int));
+static RETSIGTYPE _rl_handle_signal PARAMS((int));
+     
+/* Exported variables for use by applications. */
+
+/* If non-zero, readline will install its own signal handlers for
+   SIGINT, SIGTERM, SIGHUP, SIGQUIT, SIGALRM, SIGTSTP, SIGTTIN, and SIGTTOU. */
+int rl_catch_signals = 1;
+
+/* If non-zero, readline will install a signal handler for SIGWINCH. */
+#ifdef SIGWINCH
+int rl_catch_sigwinch = 1;
+#else
+int rl_catch_sigwinch = 0;	/* for the readline state struct in readline.c */
+#endif
+
+/* Private variables. */
+int volatile _rl_caught_signal = 0;	/* should be sig_atomic_t, but that requires including <signal.h> everywhere */
+
+/* If non-zero, print characters corresponding to received signals as long as
+   the user has indicated his desire to do so (_rl_echo_control_chars). */
+int _rl_echoctl = 0;
+
+int _rl_intr_char = 0;
+int _rl_quit_char = 0;
+int _rl_susp_char = 0;
+
+static int signals_set_flag;
+static int sigwinch_set_flag;
+
+#if defined (HAVE_POSIX_SIGNALS)
+sigset_t _rl_orig_sigset;
+#endif /* !HAVE_POSIX_SIGNALS */
+
+/* **************************************************************** */
+/*					        		    */
+/*			   Signal Handling                          */
+/*								    */
+/* **************************************************************** */
+
+static sighandler_cxt old_int, old_term, old_hup, old_alrm, old_quit;
+#if defined (SIGTSTP)
+static sighandler_cxt old_tstp, old_ttou, old_ttin;
+#endif
+#if defined (SIGWINCH)
+static sighandler_cxt old_winch;
+#endif
+
+_rl_sigcleanup_func_t *_rl_sigcleanup;
+void *_rl_sigcleanarg;
+
+/* Readline signal handler functions. */
+
+/* Called from RL_CHECK_SIGNALS() macro to run signal handling code. */
+RETSIGTYPE
+_rl_signal_handler (int sig)
+{
+  _rl_caught_signal = 0;	/* XXX */
+
+#if defined (SIGWINCH)
+  if (sig == SIGWINCH)
+    {
+      RL_SETSTATE(RL_STATE_SIGHANDLER);
+
+      rl_resize_terminal ();
+      /* XXX - experimental for now */
+      /* Call a signal hook because though we called the original signal handler
+	 in rl_sigwinch_handler below, we will not resend the signal to
+	 ourselves. */
+      if (rl_signal_event_hook)
+	(*rl_signal_event_hook) ();
+
+      RL_UNSETSTATE(RL_STATE_SIGHANDLER);
+    }
+  else
+#endif
+    _rl_handle_signal (sig);
+
+  SIGHANDLER_RETURN;
+}
+
+static RETSIGTYPE
+rl_signal_handler (int sig)
+{
+  _rl_caught_signal = sig;
+  SIGHANDLER_RETURN;
+}
+
+/* This is called to handle a signal when it is safe to do so (out of the
+   signal handler execution path). Called by _rl_signal_handler for all the
+   signals readline catches except SIGWINCH. */
+static RETSIGTYPE
+_rl_handle_signal (int sig)
+{
+  int block_sig;
+
+#if defined (HAVE_POSIX_SIGNALS)
+  sigset_t set, oset;
+#else /* !HAVE_POSIX_SIGNALS */
+#  if defined (HAVE_BSD_SIGNALS)
+  long omask;
+#  else /* !HAVE_BSD_SIGNALS */
+  sighandler_cxt dummy_cxt;	/* needed for rl_set_sighandler call */
+#  endif /* !HAVE_BSD_SIGNALS */
+#endif /* !HAVE_POSIX_SIGNALS */
+
+  RL_SETSTATE(RL_STATE_SIGHANDLER);
+
+#if !defined (HAVE_BSD_SIGNALS) && !defined (HAVE_POSIX_SIGNALS)
+  /* Since the signal will not be blocked while we are in the signal
+     handler, ignore it until rl_clear_signals resets the catcher. */
+#  if defined (SIGALRM)
+  if (sig == SIGINT || sig == SIGALRM)
+#  else
+  if (sig == SIGINT)
+#  endif
+    rl_set_sighandler (sig, SIG_IGN, &dummy_cxt);
+#endif /* !HAVE_BSD_SIGNALS && !HAVE_POSIX_SIGNALS */
+
+  /* If there's a sig cleanup function registered, call it and `deregister'
+     the cleanup function to avoid multiple calls */
+  if (_rl_sigcleanup)
+    {
+      (*_rl_sigcleanup) (sig, _rl_sigcleanarg);
+      _rl_sigcleanup = 0;
+      _rl_sigcleanarg = 0;
+    }
+
+#if defined (HAVE_POSIX_SIGNALS)
+  /* Get the current set of blocked signals. If we want to block a signal for
+     the duration of the cleanup functions, make sure to add it to SET and
+     set block_sig = 1 (see the SIGHUP case below). */
+  block_sig = 0;	/* sentinel to block signals with sigprocmask */
+  sigemptyset (&set);
+  sigprocmask (SIG_BLOCK, (sigset_t *)NULL, &set);
+#endif
+
+  switch (sig)
+    {
+    case SIGINT:
+      _rl_reset_completion_state ();
+      rl_free_line_state ();
+#if defined (READLINE_CALLBACKS)
+      rl_callback_sigcleanup ();
+#endif
+
+      /* FALLTHROUGH */
+
+#if defined (SIGTSTP)
+    case SIGTSTP:
+    case SIGTTIN:
+    case SIGTTOU:
+#  if defined (HAVE_POSIX_SIGNALS)
+      /* Block SIGTTOU so we can restore the terminal settings to something
+	 sane without stopping on SIGTTOU if we have been placed into the
+	 background.  Even trying to get the current terminal pgrp with
+	 tcgetpgrp() will generate SIGTTOU, so we don't bother.  We still do
+	 this even if we've been stopped on SIGTTOU, since we handle signals
+	 when we have returned from the signal handler and the signal is no
+	 longer blocked. */
+      sigaddset (&set, SIGTTOU);
+      block_sig = 1;
+#  endif
+#endif /* SIGTSTP */
+   /* Any signals that should be blocked during cleanup should go here. */
+#if defined (SIGHUP)
+    case SIGHUP:
+#  if defined (_AIX)
+      if (block_sig == 0)
+	{
+	  sigaddset (&set, sig);
+	  block_sig = 1;
+	}
+#  endif // _AIX
+#endif
+    /* Signals that don't require blocking during cleanup should go here. */
+    case SIGTERM:
+#if defined (SIGALRM)
+    case SIGALRM:
+#endif
+#if defined (SIGQUIT)
+    case SIGQUIT:
+#endif
+
+      if (block_sig)
+	sigprocmask (SIG_BLOCK, &set, &oset);
+
+      rl_echo_signal_char (sig);
+      rl_cleanup_after_signal ();
+
+      /* At this point, the application's signal handler, if any, is the
+	 current handler. */
+
+#if defined (HAVE_POSIX_SIGNALS)
+      /* Unblock any signal(s) blocked above */
+      if (block_sig)
+	sigprocmask (SIG_UNBLOCK, &oset, (sigset_t *)NULL);
+#endif
+
+      /* We don't have to bother unblocking the signal because we are not
+	 running in a signal handler context. */
+#if 0
+#if defined (HAVE_POSIX_SIGNALS)
+      /* Make sure this signal is not blocked when we resend it to the
+	 calling application. */
+      sigemptyset (&set);
+      sigprocmask (SIG_BLOCK, (sigset_t *)NULL, &set);
+      sigdelset (&set, sig);
+#else /* !HAVE_POSIX_SIGNALS */
+#  if defined (HAVE_BSD_SIGNALS)
+      omask = sigblock (0);
+#  endif /* HAVE_BSD_SIGNALS */
+#endif /* !HAVE_POSIX_SIGNALS */
+#endif
+
+#if defined (__EMX__)
+      signal (sig, SIG_ACK);
+#endif
+
+#if defined (HAVE_KILL)
+      kill (getpid (), sig);
+#else
+      raise (sig);		/* assume we have raise */
+#endif
+
+      /* We don't need to modify the signal mask now that this is not run in
+	 a signal handler context. */
+#if 0
+      /* Let the signal that we just sent through if it is blocked.  */
+#if defined (HAVE_POSIX_SIGNALS)
+      sigprocmask (SIG_SETMASK, &set, (sigset_t *)NULL);
+#else /* !HAVE_POSIX_SIGNALS */
+#  if defined (HAVE_BSD_SIGNALS)
+      sigsetmask (omask & ~(sigmask (sig)));
+#  endif /* HAVE_BSD_SIGNALS */
+#endif /* !HAVE_POSIX_SIGNALS */
+#endif
+
+      rl_reset_after_signal ();      
+    }
+
+  RL_UNSETSTATE(RL_STATE_SIGHANDLER);
+  SIGHANDLER_RETURN;
+}
+
+#if defined (SIGWINCH)
+static RETSIGTYPE
+rl_sigwinch_handler (int sig)
+{
+  SigHandler *oh;
+
+#if defined (MUST_REINSTALL_SIGHANDLERS)
+  sighandler_cxt dummy_winch;
+
+  /* We don't want to change old_winch -- it holds the state of SIGWINCH
+     disposition set by the calling application.  We need this state
+     because we call the application's SIGWINCH handler after updating
+     our own idea of the screen size. */
+  rl_set_sighandler (SIGWINCH, rl_sigwinch_handler, &dummy_winch);
+#endif
+
+  RL_SETSTATE(RL_STATE_SIGHANDLER);
+  _rl_caught_signal = sig;
+
+  /* If another sigwinch handler has been installed, call it. */
+  oh = (SigHandler *)old_winch.sa_handler;
+  if (oh &&  oh != (SigHandler *)SIG_IGN && oh != (SigHandler *)SIG_DFL)
+    (*oh) (sig);
+
+  RL_UNSETSTATE(RL_STATE_SIGHANDLER);
+  SIGHANDLER_RETURN;
+}
+#endif  /* SIGWINCH */
+
+/* Functions to manage signal handling. */
+
+#if !defined (HAVE_POSIX_SIGNALS)
+static int
+rl_sigaction (int sig, sighandler_cxt *nh, sighandler_cxt *oh)
+{
+  oh->sa_handler = signal (sig, nh->sa_handler);
+  return 0;
+}
+#endif /* !HAVE_POSIX_SIGNALS */
+
+/* Set up a readline-specific signal handler, saving the old signal
+   information in OHANDLER.  Return the old signal handler, like
+   signal(). */
+static SigHandler *
+rl_set_sighandler (int sig, SigHandler *handler, sighandler_cxt *ohandler)
+{
+  sighandler_cxt old_handler;
+#if defined (HAVE_POSIX_SIGNALS)
+  struct sigaction act;
+
+  act.sa_handler = handler;
+#  if defined (SIGWINCH)
+  act.sa_flags = (sig == SIGWINCH) ? SA_RESTART : 0;
+#  else
+  act.sa_flags = 0;
+#  endif /* SIGWINCH */
+  sigemptyset (&act.sa_mask);
+  sigemptyset (&ohandler->sa_mask);
+  sigaction (sig, &act, &old_handler);
+#else
+  old_handler.sa_handler = (SigHandler *)signal (sig, handler);
+#endif /* !HAVE_POSIX_SIGNALS */
+
+  /* XXX -- assume we have memcpy */
+  /* If rl_set_signals is called twice in a row, don't set the old handler to
+     rl_signal_handler, because that would cause infinite recursion. */
+  if (handler != rl_signal_handler || old_handler.sa_handler != rl_signal_handler)
+    memcpy (ohandler, &old_handler, sizeof (sighandler_cxt));
+
+  return (ohandler->sa_handler);
+}
+
+/* Set disposition of SIG to HANDLER, returning old state in OHANDLER.  Don't
+   change disposition if OHANDLER indicates the signal was ignored. */
+static void
+rl_maybe_set_sighandler (int sig, SigHandler *handler, sighandler_cxt *ohandler)
+{
+  sighandler_cxt dummy;
+  SigHandler *oh;
+
+  sigemptyset (&dummy.sa_mask);
+  dummy.sa_flags = 0;
+  oh = rl_set_sighandler (sig, handler, ohandler);
+  if (oh == (SigHandler *)SIG_IGN)
+    rl_sigaction (sig, ohandler, &dummy);
+}
+
+/* Set the disposition of SIG to HANDLER, if HANDLER->sa_handler indicates the
+   signal was not being ignored.  MUST only be called for signals whose
+   disposition was changed using rl_maybe_set_sighandler or for which the
+   SIG_IGN check was performed inline (e.g., SIGALRM below). */
+static void
+rl_maybe_restore_sighandler (int sig, sighandler_cxt *handler)
+{
+  sighandler_cxt dummy;
+
+  sigemptyset (&dummy.sa_mask);
+  dummy.sa_flags = 0;
+  if (handler->sa_handler != SIG_IGN)
+    rl_sigaction (sig, handler, &dummy);
+}
+
+int
+rl_set_signals (void)
+{
+  sighandler_cxt dummy;
+  SigHandler *oh;
+#if defined (HAVE_POSIX_SIGNALS)
+  static int sigmask_set = 0;
+  static sigset_t bset, oset;
+#endif
+
+#if defined (HAVE_POSIX_SIGNALS)
+  if (rl_catch_signals && sigmask_set == 0)
+    {
+      sigemptyset (&bset);
+
+      sigaddset (&bset, SIGINT);
+      sigaddset (&bset, SIGTERM);
+#if defined (SIGHUP)
+      sigaddset (&bset, SIGHUP);
+#endif
+#if defined (SIGQUIT)
+      sigaddset (&bset, SIGQUIT);
+#endif
+#if defined (SIGALRM)
+      sigaddset (&bset, SIGALRM);
+#endif
+#if defined (SIGTSTP)
+      sigaddset (&bset, SIGTSTP);
+#endif
+#if defined (SIGTTIN)
+      sigaddset (&bset, SIGTTIN);
+#endif
+#if defined (SIGTTOU)
+      sigaddset (&bset, SIGTTOU);
+#endif
+      sigmask_set = 1;
+    }      
+#endif /* HAVE_POSIX_SIGNALS */
+
+  if (rl_catch_signals && signals_set_flag == 0)
+    {
+#if defined (HAVE_POSIX_SIGNALS)
+      sigemptyset (&_rl_orig_sigset);
+      sigprocmask (SIG_BLOCK, &bset, &_rl_orig_sigset);
+#endif
+
+      rl_maybe_set_sighandler (SIGINT, rl_signal_handler, &old_int);
+      rl_maybe_set_sighandler (SIGTERM, rl_signal_handler, &old_term);
+#if defined (SIGHUP)
+      rl_maybe_set_sighandler (SIGHUP, rl_signal_handler, &old_hup);
+#endif
+#if defined (SIGQUIT)
+      rl_maybe_set_sighandler (SIGQUIT, rl_signal_handler, &old_quit);
+#endif
+
+#if defined (SIGALRM)
+      oh = rl_set_sighandler (SIGALRM, rl_signal_handler, &old_alrm);
+      if (oh == (SigHandler *)SIG_IGN)
+	rl_sigaction (SIGALRM, &old_alrm, &dummy);
+#if defined (HAVE_POSIX_SIGNALS) && defined (SA_RESTART)
+      /* If the application using readline has already installed a signal
+	 handler with SA_RESTART, SIGALRM will cause reads to be restarted
+	 automatically, so readline should just get out of the way.  Since
+	 we tested for SIG_IGN above, we can just test for SIG_DFL here. */
+      if (oh != (SigHandler *)SIG_DFL && (old_alrm.sa_flags & SA_RESTART))
+	rl_sigaction (SIGALRM, &old_alrm, &dummy);
+#endif /* HAVE_POSIX_SIGNALS */
+#endif /* SIGALRM */
+
+#if defined (SIGTSTP)
+      rl_maybe_set_sighandler (SIGTSTP, rl_signal_handler, &old_tstp);
+#endif /* SIGTSTP */
+
+#if defined (SIGTTOU)
+      rl_maybe_set_sighandler (SIGTTOU, rl_signal_handler, &old_ttou);
+#endif /* SIGTTOU */
+
+#if defined (SIGTTIN)
+      rl_maybe_set_sighandler (SIGTTIN, rl_signal_handler, &old_ttin);
+#endif /* SIGTTIN */
+
+      signals_set_flag = 1;
+
+#if defined (HAVE_POSIX_SIGNALS)
+      sigprocmask (SIG_SETMASK, &_rl_orig_sigset, (sigset_t *)NULL);
+#endif
+    }
+  else if (rl_catch_signals == 0)
+    {
+#if defined (HAVE_POSIX_SIGNALS)
+      sigemptyset (&_rl_orig_sigset);
+      sigprocmask (SIG_BLOCK, (sigset_t *)NULL, &_rl_orig_sigset);
+#endif
+    }
+
+#if defined (SIGWINCH)
+  if (rl_catch_sigwinch && sigwinch_set_flag == 0)
+    {
+      rl_maybe_set_sighandler (SIGWINCH, rl_sigwinch_handler, &old_winch);
+      sigwinch_set_flag = 1;
+    }
+#endif /* SIGWINCH */
+
+  return 0;
+}
+
+int
+rl_clear_signals (void)
+{
+  sighandler_cxt dummy;
+
+  if (rl_catch_signals && signals_set_flag == 1)
+    {
+      /* Since rl_maybe_set_sighandler doesn't override a SIG_IGN handler,
+	 we should in theory not have to restore a handler where
+	 old_xxx.sa_handler == SIG_IGN.  That's what rl_maybe_restore_sighandler
+	 does.  Fewer system calls should reduce readline's per-line
+	 overhead */
+      rl_maybe_restore_sighandler (SIGINT, &old_int);
+      rl_maybe_restore_sighandler (SIGTERM, &old_term);
+#if defined (SIGHUP)
+      rl_maybe_restore_sighandler (SIGHUP, &old_hup);
+#endif
+#if defined (SIGQUIT)
+      rl_maybe_restore_sighandler (SIGQUIT, &old_quit);
+#endif
+#if defined (SIGALRM)
+      rl_maybe_restore_sighandler (SIGALRM, &old_alrm);
+#endif
+
+#if defined (SIGTSTP)
+      rl_maybe_restore_sighandler (SIGTSTP, &old_tstp);
+#endif /* SIGTSTP */
+
+#if defined (SIGTTOU)
+      rl_maybe_restore_sighandler (SIGTTOU, &old_ttou);
+#endif /* SIGTTOU */
+
+#if defined (SIGTTIN)
+      rl_maybe_restore_sighandler (SIGTTIN, &old_ttin);
+#endif /* SIGTTIN */
+
+      signals_set_flag = 0;
+    }
+
+#if defined (SIGWINCH)
+  if (rl_catch_sigwinch && sigwinch_set_flag == 1)
+    {
+      sigemptyset (&dummy.sa_mask);
+      rl_sigaction (SIGWINCH, &old_winch, &dummy);
+      sigwinch_set_flag = 0;
+    }
+#endif
+
+  return 0;
+}
+
+/* Clean up the terminal and readline state after catching a signal, before
+   resending it to the calling application. */
+void
+rl_cleanup_after_signal (void)
+{
+  _rl_clean_up_for_exit ();
+  if (rl_deprep_term_function)
+    (*rl_deprep_term_function) ();
+  rl_clear_pending_input ();
+  rl_clear_signals ();
+}
+
+/* Reset the terminal and readline state after a signal handler returns. */
+void
+rl_reset_after_signal (void)
+{
+  if (rl_prep_term_function)
+    (*rl_prep_term_function) (_rl_meta_flag);
+  rl_set_signals ();
+}
+
+/* Free up the readline variable line state for the current line (undo list,
+   any partial history entry, any keyboard macros in progress, and any
+   numeric arguments in process) after catching a signal, before calling
+   rl_cleanup_after_signal(). */ 
+void
+rl_free_line_state (void)
+{
+  register HIST_ENTRY *entry;
+
+  rl_free_undo_list ();
+
+  entry = current_history ();
+  if (entry)
+    entry->data = (char *)NULL;
+
+  _rl_kill_kbd_macro ();
+  rl_clear_message ();
+  _rl_reset_argument ();
+}
+
+int
+rl_pending_signal (void)
+{
+  return (_rl_caught_signal);
+}
+
+void
+rl_check_signals (void)
+{
+  RL_CHECK_SIGNALS ();
+}
+#endif  /* HANDLE_SIGNALS */
+
+/* **************************************************************** */
+/*								    */
+/*			   SIGINT Management			    */
+/*								    */
+/* **************************************************************** */
+
+#if defined (HAVE_POSIX_SIGNALS)
+static sigset_t sigint_set, sigint_oset;
+static sigset_t sigwinch_set, sigwinch_oset;
+#else /* !HAVE_POSIX_SIGNALS */
+#  if defined (HAVE_BSD_SIGNALS)
+static int sigint_oldmask;
+static int sigwinch_oldmask;
+#  endif /* HAVE_BSD_SIGNALS */
+#endif /* !HAVE_POSIX_SIGNALS */
+
+static int sigint_blocked;
+static int sigwinch_blocked;
+
+/* Cause SIGINT to not be delivered until the corresponding call to
+   release_sigint(). */
+void
+_rl_block_sigint (void)
+{
+  if (sigint_blocked)
+    return;
+
+  sigint_blocked = 1;
+}
+
+/* Allow SIGINT to be delivered. */
+void
+_rl_release_sigint (void)
+{
+  if (sigint_blocked == 0)
+    return;
+
+  sigint_blocked = 0;
+  RL_CHECK_SIGNALS ();
+}
+
+/* Cause SIGWINCH to not be delivered until the corresponding call to
+   release_sigwinch(). */
+void
+_rl_block_sigwinch (void)
+{
+  if (sigwinch_blocked)
+    return;
+
+#if defined (SIGWINCH)
+
+#if defined (HAVE_POSIX_SIGNALS)
+  sigemptyset (&sigwinch_set);
+  sigemptyset (&sigwinch_oset);
+  sigaddset (&sigwinch_set, SIGWINCH);
+  sigprocmask (SIG_BLOCK, &sigwinch_set, &sigwinch_oset);
+#else /* !HAVE_POSIX_SIGNALS */
+#  if defined (HAVE_BSD_SIGNALS)
+  sigwinch_oldmask = sigblock (sigmask (SIGWINCH));
+#  else /* !HAVE_BSD_SIGNALS */
+#    if defined (HAVE_USG_SIGHOLD)
+  sighold (SIGWINCH);
+#    endif /* HAVE_USG_SIGHOLD */
+#  endif /* !HAVE_BSD_SIGNALS */
+#endif /* !HAVE_POSIX_SIGNALS */
+
+#endif /* SIGWINCH */
+
+  sigwinch_blocked = 1;
+}
+
+/* Allow SIGWINCH to be delivered. */
+void
+_rl_release_sigwinch (void)
+{
+  if (sigwinch_blocked == 0)
+    return;
+
+#if defined (SIGWINCH)
+
+#if defined (HAVE_POSIX_SIGNALS)
+  sigprocmask (SIG_SETMASK, &sigwinch_oset, (sigset_t *)NULL);
+#else
+#  if defined (HAVE_BSD_SIGNALS)
+  sigsetmask (sigwinch_oldmask);
+#  else /* !HAVE_BSD_SIGNALS */
+#    if defined (HAVE_USG_SIGHOLD)
+  sigrelse (SIGWINCH);
+#    endif /* HAVE_USG_SIGHOLD */
+#  endif /* !HAVE_BSD_SIGNALS */
+#endif /* !HAVE_POSIX_SIGNALS */
+
+#endif /* SIGWINCH */
+
+  sigwinch_blocked = 0;
+}
+
+/* **************************************************************** */
+/*								    */
+/*		Echoing special control characters		    */
+/*								    */
+/* **************************************************************** */
+void
+rl_echo_signal_char (int sig)
+{
+  char cstr[3];
+  int cslen, c;
+
+  if (_rl_echoctl == 0 || _rl_echo_control_chars == 0)
+    return;
+
+  switch (sig)
+    {
+    case SIGINT:  c = _rl_intr_char; break;
+#if defined (SIGQUIT)
+    case SIGQUIT: c = _rl_quit_char; break;
+#endif
+#if defined (SIGTSTP)
+    case SIGTSTP: c = _rl_susp_char; break;
+#endif
+    default: return;
+    }
+
+  if (CTRL_CHAR (c) || c == RUBOUT)
+    {
+      cstr[0] = '^';
+      cstr[1] = CTRL_CHAR (c) ? UNCTRL (c) : '?';
+      cstr[cslen = 2] = '\0';
+    }
+  else
+    {
+      cstr[0] = c;
+      cstr[cslen = 1] = '\0';
+    }
+
+  _rl_output_some_chars (cstr, cslen);
+}
diff --git a/lib/readline/tcap.h b/lib/readline/tcap.h
new file mode 100644
index 0000000..859e6ee
--- /dev/null
+++ b/lib/readline/tcap.h
@@ -0,0 +1,60 @@
+/* tcap.h -- termcap library functions and variables. */
+
+/* Copyright (C) 1996-2015 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_RLTCAP_H_)
+#define _RLTCAP_H_
+
+#if defined (HAVE_CONFIG_H)
+#  include "config.h"
+#endif
+
+#if defined (HAVE_TERMCAP_H)
+#  if defined (__linux__) && !defined (SPEED_T_IN_SYS_TYPES)
+#    include "rltty.h"
+#  endif
+#  include <termcap.h>
+#elif defined (HAVE_NCURSES_TERMCAP_H)
+#  include <ncurses/termcap.h>
+#else
+
+/* On Solaris2, sys/types.h #includes sys/reg.h, which #defines PC.
+   Unfortunately, PC is a global variable used by the termcap library. */
+#ifdef PC
+#  undef PC
+#endif
+
+extern char PC;
+extern char *UP, *BC;
+
+extern short ospeed;
+
+extern int tgetent ();
+extern int tgetflag ();
+extern int tgetnum ();
+extern char *tgetstr ();
+
+extern int tputs ();
+
+extern char *tgoto ();
+
+#endif /* HAVE_TERMCAP_H */
+
+#endif /* !_RLTCAP_H_ */
diff --git a/lib/readline/terminal.c b/lib/readline/terminal.c
new file mode 100644
index 0000000..05415dc
--- /dev/null
+++ b/lib/readline/terminal.c
@@ -0,0 +1,845 @@
+/* terminal.c -- controlling the terminal with termcap. */
+
+/* Copyright (C) 1996-2017 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <sys/types.h>
+#include "posixstat.h"
+#include <fcntl.h>
+#if defined (HAVE_SYS_FILE_H)
+#  include <sys/file.h>
+#endif /* HAVE_SYS_FILE_H */
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif /* HAVE_UNISTD_H */
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#if defined (HAVE_LOCALE_H)
+#  include <locale.h>
+#endif
+
+#include <stdio.h>
+
+/* System-specific feature definitions and include files. */
+#include "rldefs.h"
+
+#ifdef __MSDOS__
+#  include <pc.h>
+#endif
+
+#include "rltty.h"
+#if defined (HAVE_SYS_IOCTL_H)
+#  include <sys/ioctl.h>		/* include for declaration of ioctl */
+#endif
+#include "tcap.h"
+
+/* Some standard library routines. */
+#include "readline.h"
+#include "history.h"
+
+#include "rlprivate.h"
+#include "rlshell.h"
+#include "xmalloc.h"
+
+#if defined (__MINGW32__)
+#  include <windows.h>
+#  include <wincon.h>
+
+static void _win_get_screensize PARAMS((int *, int *));
+#endif
+
+#if defined (__EMX__)
+static void _emx_get_screensize PARAMS((int *, int *));
+#endif
+
+/* If the calling application sets this to a non-zero value, readline will
+   use the $LINES and $COLUMNS environment variables to set its idea of the
+   window size before interrogating the kernel. */
+int rl_prefer_env_winsize = 0;
+
+/* If this is non-zero, readline will set LINES and COLUMNS in the
+   environment when it handles SIGWINCH. */
+int rl_change_environment = 1;
+
+/* **************************************************************** */
+/*								    */
+/*			Terminal and Termcap			    */
+/*								    */
+/* **************************************************************** */
+
+#ifndef __MSDOS__
+static char *term_buffer = (char *)NULL;
+static char *term_string_buffer = (char *)NULL;
+#endif
+
+static int tcap_initialized;
+
+#if !defined (__linux__) && !defined (NCURSES_VERSION)
+#  if defined (__EMX__) || defined (NEED_EXTERN_PC)
+extern 
+#  endif /* __EMX__ || NEED_EXTERN_PC */
+char PC, *BC, *UP;
+#endif /* !__linux__ && !NCURSES_VERSION */
+
+/* Some strings to control terminal actions.  These are output by tputs (). */
+char *_rl_term_clreol;
+char *_rl_term_clrpag;
+char *_rl_term_clrscroll;
+char *_rl_term_cr;
+char *_rl_term_backspace;
+char *_rl_term_goto;
+char *_rl_term_pc;
+
+/* Non-zero if we determine that the terminal can do character insertion. */
+int _rl_terminal_can_insert = 0;
+
+/* How to insert characters. */
+char *_rl_term_im;
+char *_rl_term_ei;
+char *_rl_term_ic;
+char *_rl_term_ip;
+char *_rl_term_IC;
+
+/* How to delete characters. */
+char *_rl_term_dc;
+char *_rl_term_DC;
+
+/* How to move forward a char, non-destructively */
+char *_rl_term_forward_char;
+
+/* How to go up a line. */
+char *_rl_term_up;
+
+/* A visible bell; char if the terminal can be made to flash the screen. */
+static char *_rl_visible_bell;
+
+/* Non-zero means the terminal can auto-wrap lines. */
+int _rl_term_autowrap = -1;
+
+/* Non-zero means that this terminal has a meta key. */
+static int term_has_meta;
+
+/* The sequences to write to turn on and off the meta key, if this
+   terminal has one. */
+static char *_rl_term_mm;
+static char *_rl_term_mo;
+
+/* The sequences to enter and exit standout mode. */
+static char *_rl_term_so;
+static char *_rl_term_se;
+
+/* The key sequences output by the arrow keys, if this terminal has any. */
+static char *_rl_term_ku;
+static char *_rl_term_kd;
+static char *_rl_term_kr;
+static char *_rl_term_kl;
+
+/* How to initialize and reset the arrow keys, if this terminal has any. */
+static char *_rl_term_ks;
+static char *_rl_term_ke;
+
+/* The key sequences sent by the Home and End keys, if any. */
+static char *_rl_term_kh;
+static char *_rl_term_kH;
+static char *_rl_term_at7;	/* @7 */
+
+/* Delete key */
+static char *_rl_term_kD;
+
+/* Insert key */
+static char *_rl_term_kI;
+
+/* Cursor control */
+static char *_rl_term_vs;	/* very visible */
+static char *_rl_term_ve;	/* normal */
+
+/* It's not clear how HPUX is so broken here. */
+#ifdef TGETENT_BROKEN
+#  define TGETENT_SUCCESS 0
+#else
+#  define TGETENT_SUCCESS 1
+#endif
+#ifdef TGETFLAG_BROKEN
+#  define TGETFLAG_SUCCESS 0
+#else
+#  define TGETFLAG_SUCCESS 1
+#endif
+#define TGETFLAG(cap)	(tgetflag (cap) == TGETFLAG_SUCCESS)
+
+static void bind_termcap_arrow_keys PARAMS((Keymap));
+
+/* Variables that hold the screen dimensions, used by the display code. */
+int _rl_screenwidth, _rl_screenheight, _rl_screenchars;
+
+/* Non-zero means the user wants to enable the keypad. */
+int _rl_enable_keypad;
+
+/* Non-zero means the user wants to enable a meta key. */
+int _rl_enable_meta = 1;
+
+#if defined (__EMX__)
+static void
+_emx_get_screensize (int *swp, int *shp)
+{
+  int sz[2];
+
+  _scrsize (sz);
+
+  if (swp)
+    *swp = sz[0];
+  if (shp)
+    *shp = sz[1];
+}
+#endif
+
+#if defined (__MINGW32__)
+static void
+_win_get_screensize (int *swp, int *shp)
+{
+  HANDLE hConOut;
+  CONSOLE_SCREEN_BUFFER_INFO scr;
+
+  hConOut = GetStdHandle (STD_OUTPUT_HANDLE);
+  if (hConOut != INVALID_HANDLE_VALUE)
+    {
+      if (GetConsoleScreenBufferInfo (hConOut, &scr))
+	{
+	  *swp = scr.dwSize.X;
+	  *shp = scr.srWindow.Bottom - scr.srWindow.Top + 1;
+	}
+    }
+}
+#endif
+
+/* Get readline's idea of the screen size.  TTY is a file descriptor open
+   to the terminal.  If IGNORE_ENV is true, we do not pay attention to the
+   values of $LINES and $COLUMNS.  The tests for TERM_STRING_BUFFER being
+   non-null serve to check whether or not we have initialized termcap. */
+void
+_rl_get_screen_size (int tty, int ignore_env)
+{
+  char *ss;
+#if defined (TIOCGWINSZ)
+  struct winsize window_size;
+#endif /* TIOCGWINSZ */
+  int wr, wc;
+
+  wr = wc = -1;
+#if defined (TIOCGWINSZ)
+  if (ioctl (tty, TIOCGWINSZ, &window_size) == 0)
+    {
+      wc = (int) window_size.ws_col;
+      wr = (int) window_size.ws_row;
+    }
+#endif /* TIOCGWINSZ */
+
+#if defined (__EMX__)
+  _emx_get_screensize (&wc, &wr);
+#elif defined (__MINGW32__)
+  _win_get_screensize (&wc, &wr);
+#endif
+
+  if (ignore_env || rl_prefer_env_winsize == 0)
+    {
+      _rl_screenwidth = wc;
+      _rl_screenheight = wr;
+    }
+  else
+    _rl_screenwidth = _rl_screenheight = -1;
+
+  /* Environment variable COLUMNS overrides setting of "co" if IGNORE_ENV
+     is unset.  If we prefer the environment, check it first before
+     assigning the value returned by the kernel. */
+  if (_rl_screenwidth <= 0)
+    {
+      if (ignore_env == 0 && (ss = sh_get_env_value ("COLUMNS")))
+	_rl_screenwidth = atoi (ss);
+
+      if (_rl_screenwidth <= 0)
+        _rl_screenwidth = wc;
+
+#if defined (__DJGPP__)
+      if (_rl_screenwidth <= 0)
+	_rl_screenwidth = ScreenCols ();
+#else
+      if (_rl_screenwidth <= 0 && term_string_buffer)
+	_rl_screenwidth = tgetnum ("co");
+#endif
+    }
+
+  /* Environment variable LINES overrides setting of "li" if IGNORE_ENV
+     is unset. */
+  if (_rl_screenheight <= 0)
+    {
+      if (ignore_env == 0 && (ss = sh_get_env_value ("LINES")))
+	_rl_screenheight = atoi (ss);
+
+      if (_rl_screenheight <= 0)
+        _rl_screenheight = wr;
+
+#if defined (__DJGPP__)
+      if (_rl_screenheight <= 0)
+	_rl_screenheight = ScreenRows ();
+#else
+      if (_rl_screenheight <= 0 && term_string_buffer)
+	_rl_screenheight = tgetnum ("li");
+#endif
+    }
+
+  /* If all else fails, default to 80x24 terminal. */
+  if (_rl_screenwidth <= 1)
+    _rl_screenwidth = 80;
+
+  if (_rl_screenheight <= 0)
+    _rl_screenheight = 24;
+
+  /* If we're being compiled as part of bash, set the environment
+     variables $LINES and $COLUMNS to new values.  Otherwise, just
+     do a pair of putenv () or setenv () calls. */
+  if (rl_change_environment)
+    sh_set_lines_and_columns (_rl_screenheight, _rl_screenwidth);
+
+  if (_rl_term_autowrap == 0)
+    _rl_screenwidth--;
+
+  _rl_screenchars = _rl_screenwidth * _rl_screenheight;
+}
+
+void
+_rl_set_screen_size (int rows, int cols)
+{
+  if (_rl_term_autowrap == -1)
+    _rl_init_terminal_io (rl_terminal_name);
+
+  if (rows > 0)
+    _rl_screenheight = rows;
+  if (cols > 0)
+    {
+      _rl_screenwidth = cols;
+      if (_rl_term_autowrap == 0)
+	_rl_screenwidth--;
+    }
+
+  if (rows > 0 || cols > 0)
+    _rl_screenchars = _rl_screenwidth * _rl_screenheight;
+}
+
+void
+rl_set_screen_size (int rows, int cols)
+{
+  _rl_set_screen_size (rows, cols);
+}
+
+void
+rl_get_screen_size (int *rows, int *cols)
+{
+  if (rows)
+    *rows = _rl_screenheight;
+  if (cols)
+    *cols = _rl_screenwidth;
+}
+
+void
+rl_reset_screen_size (void)
+{
+  _rl_get_screen_size (fileno (rl_instream), 0);
+}
+
+void
+_rl_sigwinch_resize_terminal (void)
+{
+  _rl_get_screen_size (fileno (rl_instream), 1);
+}
+	
+void
+rl_resize_terminal (void)
+{
+  _rl_get_screen_size (fileno (rl_instream), 1);
+  if (_rl_echoing_p)
+    {
+      if (CUSTOM_REDISPLAY_FUNC ())
+	rl_forced_update_display ();
+      else if (RL_ISSTATE(RL_STATE_REDISPLAYING) == 0)
+	_rl_redisplay_after_sigwinch ();
+    }
+}
+
+struct _tc_string {
+     const char * const tc_var;
+     char **tc_value;
+};
+
+/* This should be kept sorted, just in case we decide to change the
+   search algorithm to something smarter. */
+static const struct _tc_string tc_strings[] =
+{
+  { "@7", &_rl_term_at7 },
+  { "DC", &_rl_term_DC },
+  { "E3", &_rl_term_clrscroll },
+  { "IC", &_rl_term_IC },
+  { "ce", &_rl_term_clreol },
+  { "cl", &_rl_term_clrpag },
+  { "cr", &_rl_term_cr },
+  { "dc", &_rl_term_dc },
+  { "ei", &_rl_term_ei },
+  { "ic", &_rl_term_ic },
+  { "im", &_rl_term_im },
+  { "kD", &_rl_term_kD },	/* delete */
+  { "kH", &_rl_term_kH },	/* home down ?? */
+  { "kI", &_rl_term_kI },	/* insert */
+  { "kd", &_rl_term_kd },
+  { "ke", &_rl_term_ke },	/* end keypad mode */
+  { "kh", &_rl_term_kh },	/* home */
+  { "kl", &_rl_term_kl },
+  { "kr", &_rl_term_kr },
+  { "ks", &_rl_term_ks },	/* start keypad mode */
+  { "ku", &_rl_term_ku },
+  { "le", &_rl_term_backspace },
+  { "mm", &_rl_term_mm },
+  { "mo", &_rl_term_mo },
+  { "nd", &_rl_term_forward_char },
+  { "pc", &_rl_term_pc },
+  { "se", &_rl_term_se },
+  { "so", &_rl_term_so },
+  { "up", &_rl_term_up },
+  { "vb", &_rl_visible_bell },
+  { "vs", &_rl_term_vs },
+  { "ve", &_rl_term_ve },
+};
+
+#define NUM_TC_STRINGS (sizeof (tc_strings) / sizeof (struct _tc_string))
+
+/* Read the desired terminal capability strings into BP.  The capabilities
+   are described in the TC_STRINGS table. */
+static void
+get_term_capabilities (char **bp)
+{
+#if !defined (__DJGPP__)	/* XXX - doesn't DJGPP have a termcap library? */
+  register int i;
+
+  for (i = 0; i < NUM_TC_STRINGS; i++)
+    *(tc_strings[i].tc_value) = tgetstr ((char *)tc_strings[i].tc_var, bp);
+#endif
+  tcap_initialized = 1;
+}
+
+int
+_rl_init_terminal_io (const char *terminal_name)
+{
+  const char *term;
+  char *buffer;
+  int tty, tgetent_ret, dumbterm;
+
+  term = terminal_name ? terminal_name : sh_get_env_value ("TERM");
+  _rl_term_clrpag = _rl_term_cr = _rl_term_clreol = _rl_term_clrscroll = (char *)NULL;
+  tty = rl_instream ? fileno (rl_instream) : 0;
+
+  if (term == 0)
+    term = "dumb";
+
+  dumbterm = STREQ (term, "dumb");
+
+#ifdef __MSDOS__
+  _rl_term_im = _rl_term_ei = _rl_term_ic = _rl_term_IC = (char *)NULL;
+  _rl_term_up = _rl_term_dc = _rl_term_DC = _rl_visible_bell = (char *)NULL;
+  _rl_term_ku = _rl_term_kd = _rl_term_kl = _rl_term_kr = (char *)NULL;
+  _rl_term_mm = _rl_term_mo = (char *)NULL;
+  _rl_terminal_can_insert = term_has_meta = _rl_term_autowrap = 0;
+  _rl_term_cr = "\r";
+  _rl_term_backspace = (char *)NULL;
+  _rl_term_goto = _rl_term_pc = _rl_term_ip = (char *)NULL;
+  _rl_term_ks = _rl_term_ke =_rl_term_vs = _rl_term_ve = (char *)NULL;
+  _rl_term_kh = _rl_term_kH = _rl_term_at7 = _rl_term_kI = (char *)NULL;
+  _rl_term_so = _rl_term_se = (char *)NULL;
+#if defined(HACK_TERMCAP_MOTION)
+  _rl_term_forward_char = (char *)NULL;
+#endif
+
+  _rl_get_screen_size (tty, 0);
+#else  /* !__MSDOS__ */
+  /* I've separated this out for later work on not calling tgetent at all
+     if the calling application has supplied a custom redisplay function,
+     (and possibly if the application has supplied a custom input function). */
+  if (CUSTOM_REDISPLAY_FUNC())
+    {
+      tgetent_ret = -1;
+    }
+  else
+    {
+      if (term_string_buffer == 0)
+	term_string_buffer = (char *)xmalloc(2032);
+
+      if (term_buffer == 0)
+	term_buffer = (char *)xmalloc(4080);
+
+      buffer = term_string_buffer;
+
+      tgetent_ret = tgetent (term_buffer, term);
+    }
+
+  if (tgetent_ret != TGETENT_SUCCESS)
+    {
+      FREE (term_string_buffer);
+      FREE (term_buffer);
+      buffer = term_buffer = term_string_buffer = (char *)NULL;
+
+      _rl_term_autowrap = 0;	/* used by _rl_get_screen_size */
+
+      /* Allow calling application to set default height and width, using
+	 rl_set_screen_size */
+      if (_rl_screenwidth <= 0 || _rl_screenheight <= 0)
+	{
+#if defined (__EMX__)
+	  _emx_get_screensize (&_rl_screenwidth, &_rl_screenheight);
+	  _rl_screenwidth--;
+#else /* !__EMX__ */
+	  _rl_get_screen_size (tty, 0);
+#endif /* !__EMX__ */
+	}
+
+      /* Defaults. */
+      if (_rl_screenwidth <= 0 || _rl_screenheight <= 0)
+        {
+	  _rl_screenwidth = 79;
+	  _rl_screenheight = 24;
+        }
+
+      /* Everything below here is used by the redisplay code (tputs). */
+      _rl_screenchars = _rl_screenwidth * _rl_screenheight;
+      _rl_term_cr = "\r";
+      _rl_term_im = _rl_term_ei = _rl_term_ic = _rl_term_IC = (char *)NULL;
+      _rl_term_up = _rl_term_dc = _rl_term_DC = _rl_visible_bell = (char *)NULL;
+      _rl_term_ku = _rl_term_kd = _rl_term_kl = _rl_term_kr = (char *)NULL;
+      _rl_term_kh = _rl_term_kH = _rl_term_kI = _rl_term_kD = (char *)NULL;
+      _rl_term_ks = _rl_term_ke = _rl_term_at7 = (char *)NULL;
+      _rl_term_mm = _rl_term_mo = (char *)NULL;
+      _rl_term_ve = _rl_term_vs = (char *)NULL;
+      _rl_term_forward_char = (char *)NULL;
+      _rl_term_so = _rl_term_se = (char *)NULL;
+      _rl_terminal_can_insert = term_has_meta = 0;
+
+      /* Assume generic unknown terminal can't handle the enable/disable
+	 escape sequences */
+      _rl_enable_bracketed_paste = 0;
+
+      /* Reasonable defaults for tgoto().  Readline currently only uses
+         tgoto if _rl_term_IC or _rl_term_DC is defined, but just in case we
+         change that later... */
+      PC = '\0';
+      BC = _rl_term_backspace = "\b";
+      UP = _rl_term_up;
+
+      return 0;
+    }
+
+  get_term_capabilities (&buffer);
+
+  /* Set up the variables that the termcap library expects the application
+     to provide. */
+  PC = _rl_term_pc ? *_rl_term_pc : 0;
+  BC = _rl_term_backspace;
+  UP = _rl_term_up;
+
+  if (_rl_term_cr == 0)
+    _rl_term_cr = "\r";
+
+  _rl_term_autowrap = TGETFLAG ("am") && TGETFLAG ("xn");
+
+  /* Allow calling application to set default height and width, using
+     rl_set_screen_size */
+  if (_rl_screenwidth <= 0 || _rl_screenheight <= 0)
+    _rl_get_screen_size (tty, 0);
+
+  /* "An application program can assume that the terminal can do
+      character insertion if *any one of* the capabilities `IC',
+      `im', `ic' or `ip' is provided."  But we can't do anything if
+      only `ip' is provided, so... */
+  _rl_terminal_can_insert = (_rl_term_IC || _rl_term_im || _rl_term_ic);
+
+  /* Check to see if this terminal has a meta key and clear the capability
+     variables if there is none. */
+  term_has_meta = TGETFLAG ("km");
+  if (term_has_meta == 0)
+    _rl_term_mm = _rl_term_mo = (char *)NULL;
+#endif /* !__MSDOS__ */
+
+  /* Attempt to find and bind the arrow keys.  Do not override already
+     bound keys in an overzealous attempt, however. */
+
+  bind_termcap_arrow_keys (emacs_standard_keymap);
+
+#if defined (VI_MODE)
+  bind_termcap_arrow_keys (vi_movement_keymap);
+  bind_termcap_arrow_keys (vi_insertion_keymap);
+#endif /* VI_MODE */
+
+  /* There's no way to determine whether or not a given terminal supports
+     bracketed paste mode, so we assume a terminal named "dumb" does not. */
+  if (dumbterm)
+    _rl_enable_bracketed_paste = 0;
+    
+  return 0;
+}
+
+/* Bind the arrow key sequences from the termcap description in MAP. */
+static void
+bind_termcap_arrow_keys (Keymap map)
+{
+  Keymap xkeymap;
+
+  xkeymap = _rl_keymap;
+  _rl_keymap = map;
+
+  rl_bind_keyseq_if_unbound (_rl_term_ku, rl_get_previous_history);
+  rl_bind_keyseq_if_unbound (_rl_term_kd, rl_get_next_history);
+  rl_bind_keyseq_if_unbound (_rl_term_kr, rl_forward_char);
+  rl_bind_keyseq_if_unbound (_rl_term_kl, rl_backward_char);
+
+  rl_bind_keyseq_if_unbound (_rl_term_kh, rl_beg_of_line);	/* Home */
+  rl_bind_keyseq_if_unbound (_rl_term_at7, rl_end_of_line);	/* End */
+
+  rl_bind_keyseq_if_unbound (_rl_term_kD, rl_delete);
+  rl_bind_keyseq_if_unbound (_rl_term_kI, rl_overwrite_mode);	/* Insert */
+
+  _rl_keymap = xkeymap;
+}
+
+char *
+rl_get_termcap (const char *cap)
+{
+  register int i;
+
+  if (tcap_initialized == 0)
+    return ((char *)NULL);
+  for (i = 0; i < NUM_TC_STRINGS; i++)
+    {
+      if (tc_strings[i].tc_var[0] == cap[0] && strcmp (tc_strings[i].tc_var, cap) == 0)
+        return *(tc_strings[i].tc_value);
+    }
+  return ((char *)NULL);
+}
+
+/* Re-initialize the terminal considering that the TERM/TERMCAP variable
+   has changed. */
+int
+rl_reset_terminal (const char *terminal_name)
+{
+  _rl_screenwidth = _rl_screenheight = 0;
+  _rl_init_terminal_io (terminal_name);
+  return 0;
+}
+
+/* A function for the use of tputs () */
+#ifdef _MINIX
+void
+_rl_output_character_function (int c)
+{
+  putc (c, _rl_out_stream);
+}
+#else /* !_MINIX */
+int
+_rl_output_character_function (int c)
+{
+  return putc (c, _rl_out_stream);
+}
+#endif /* !_MINIX */
+
+/* Write COUNT characters from STRING to the output stream. */
+void
+_rl_output_some_chars (const char *string, int count)
+{
+  fwrite (string, 1, count, _rl_out_stream);
+}
+
+/* Move the cursor back. */
+int
+_rl_backspace (int count)
+{
+  register int i;
+
+#ifndef __MSDOS__
+  if (_rl_term_backspace)
+    for (i = 0; i < count; i++)
+      tputs (_rl_term_backspace, 1, _rl_output_character_function);
+  else
+#endif
+    for (i = 0; i < count; i++)
+      putc ('\b', _rl_out_stream);
+  return 0;
+}
+
+/* Move to the start of the next line. */
+int
+rl_crlf (void)
+{
+#if defined (NEW_TTY_DRIVER) || defined (__MINT__)
+  if (_rl_term_cr)
+    tputs (_rl_term_cr, 1, _rl_output_character_function);
+#endif /* NEW_TTY_DRIVER || __MINT__ */
+  putc ('\n', _rl_out_stream);
+  return 0;
+}
+
+void
+_rl_cr (void)
+{
+#if defined (__MSDOS__)
+  putc ('\r', rl_outstream);
+#else
+  tputs (_rl_term_cr, 1, _rl_output_character_function);
+#endif
+}
+
+/* Ring the terminal bell. */
+int
+rl_ding (void)
+{
+  if (_rl_echoing_p)
+    {
+      switch (_rl_bell_preference)
+        {
+	case NO_BELL:
+	default:
+	  break;
+	case VISIBLE_BELL:
+	  if (_rl_visible_bell)
+	    {
+#ifdef __DJGPP__
+	      ScreenVisualBell ();
+#else
+	      tputs (_rl_visible_bell, 1, _rl_output_character_function);
+#endif
+	      break;
+	    }
+	  /* FALLTHROUGH */
+	case AUDIBLE_BELL:
+	  fprintf (stderr, "\007");
+	  fflush (stderr);
+	  break;
+        }
+      return (0);
+    }
+  return (-1);
+}
+
+/* **************************************************************** */
+/*								    */
+/*		Entering and leaving terminal standout mode	    */
+/*								    */
+/* **************************************************************** */
+
+void
+_rl_standout_on (void)
+{
+#ifndef __MSDOS__
+  if (_rl_term_so && _rl_term_se)
+    tputs (_rl_term_so, 1, _rl_output_character_function);
+#endif
+}
+
+void
+_rl_standout_off (void)
+{
+#ifndef __MSDOS__
+  if (_rl_term_so && _rl_term_se)
+    tputs (_rl_term_se, 1, _rl_output_character_function);
+#endif
+}
+
+/* **************************************************************** */
+/*								    */
+/*	 	Controlling the Meta Key and Keypad		    */
+/*								    */
+/* **************************************************************** */
+
+static int enabled_meta = 0;	/* flag indicating we enabled meta mode */
+
+void
+_rl_enable_meta_key (void)
+{
+#if !defined (__DJGPP__)
+  if (term_has_meta && _rl_term_mm)
+    {
+      tputs (_rl_term_mm, 1, _rl_output_character_function);
+      enabled_meta = 1;
+    }
+#endif
+}
+
+void
+_rl_disable_meta_key (void)
+{
+#if !defined (__DJGPP__)
+  if (term_has_meta && _rl_term_mo && enabled_meta)
+    {
+      tputs (_rl_term_mo, 1, _rl_output_character_function);
+      enabled_meta = 0;
+    }
+#endif
+}
+
+void
+_rl_control_keypad (int on)
+{
+#if !defined (__DJGPP__)
+  if (on && _rl_term_ks)
+    tputs (_rl_term_ks, 1, _rl_output_character_function);
+  else if (!on && _rl_term_ke)
+    tputs (_rl_term_ke, 1, _rl_output_character_function);
+#endif
+}
+
+/* **************************************************************** */
+/*								    */
+/*	 		Controlling the Cursor			    */
+/*								    */
+/* **************************************************************** */
+
+/* Set the cursor appropriately depending on IM, which is one of the
+   insert modes (insert or overwrite).  Insert mode gets the normal
+   cursor.  Overwrite mode gets a very visible cursor.  Only does
+   anything if we have both capabilities. */
+void
+_rl_set_cursor (int im, int force)
+{
+#ifndef __MSDOS__
+  if (_rl_term_ve && _rl_term_vs)
+    {
+      if (force || im != rl_insert_mode)
+	{
+	  if (im == RL_IM_OVERWRITE)
+	    tputs (_rl_term_vs, 1, _rl_output_character_function);
+	  else
+	    tputs (_rl_term_ve, 1, _rl_output_character_function);
+	}
+    }
+#endif
+}
diff --git a/lib/readline/text.c b/lib/readline/text.c
new file mode 100644
index 0000000..2567dea
--- /dev/null
+++ b/lib/readline/text.c
@@ -0,0 +1,1880 @@
+/* text.c -- text handling commands for readline. */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif /* HAVE_UNISTD_H */
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#if defined (HAVE_LOCALE_H)
+#  include <locale.h>
+#endif
+
+#include <stdio.h>
+
+/* System-specific feature definitions and include files. */
+#include "rldefs.h"
+#include "rlmbutil.h"
+
+#if defined (__EMX__)
+#  define INCL_DOSPROCESS
+#  include <os2.h>
+#endif /* __EMX__ */
+
+/* Some standard library routines. */
+#include "readline.h"
+#include "history.h"
+
+#include "rlprivate.h"
+#include "rlshell.h"
+#include "xmalloc.h"
+
+/* Forward declarations. */
+static int rl_change_case PARAMS((int, int));
+static int _rl_char_search PARAMS((int, int, int));
+
+#if defined (READLINE_CALLBACKS)
+static int _rl_insert_next_callback PARAMS((_rl_callback_generic_arg *));
+static int _rl_char_search_callback PARAMS((_rl_callback_generic_arg *));
+#endif
+
+/* The largest chunk of text that can be inserted in one call to
+   rl_insert_text.  Text blocks larger than this are divided. */
+#define TEXT_COUNT_MAX	1024
+
+int _rl_optimize_typeahead = 1;	/* rl_insert tries to read typeahead */
+
+/* **************************************************************** */
+/*								    */
+/*			Insert and Delete			    */
+/*								    */
+/* **************************************************************** */
+
+/* Insert a string of text into the line at point.  This is the only
+   way that you should do insertion.  _rl_insert_char () calls this
+   function.  Returns the number of characters inserted. */
+int
+rl_insert_text (const char *string)
+{
+  register int i, l;
+
+  l = (string && *string) ? strlen (string) : 0;
+  if (l == 0)
+    return 0;
+
+  if (rl_end + l >= rl_line_buffer_len)
+    rl_extend_line_buffer (rl_end + l);
+
+  for (i = rl_end; i >= rl_point; i--)
+    rl_line_buffer[i + l] = rl_line_buffer[i];
+  strncpy (rl_line_buffer + rl_point, string, l);
+
+  /* Remember how to undo this if we aren't undoing something. */
+  if (_rl_doing_an_undo == 0)
+    {
+      /* If possible and desirable, concatenate the undos. */
+      if ((l == 1) &&
+	  rl_undo_list &&
+	  (rl_undo_list->what == UNDO_INSERT) &&
+	  (rl_undo_list->end == rl_point) &&
+	  (rl_undo_list->end - rl_undo_list->start < 20))
+	rl_undo_list->end++;
+      else
+	rl_add_undo (UNDO_INSERT, rl_point, rl_point + l, (char *)NULL);
+    }
+  rl_point += l;
+  rl_end += l;
+  rl_line_buffer[rl_end] = '\0';
+  return l;
+}
+
+/* Delete the string between FROM and TO.  FROM is inclusive, TO is not.
+   Returns the number of characters deleted. */
+int
+rl_delete_text (int from, int to)
+{
+  register char *text;
+  register int diff, i;
+
+  /* Fix it if the caller is confused. */
+  if (from > to)
+    SWAP (from, to);
+
+  /* fix boundaries */
+  if (to > rl_end)
+    {
+      to = rl_end;
+      if (from > to)
+	from = to;
+    }
+  if (from < 0)
+    from = 0;
+
+  text = rl_copy_text (from, to);
+
+  /* Some versions of strncpy() can't handle overlapping arguments. */
+  diff = to - from;
+  for (i = from; i < rl_end - diff; i++)
+    rl_line_buffer[i] = rl_line_buffer[i + diff];
+
+  /* Remember how to undo this delete. */
+  if (_rl_doing_an_undo == 0)
+    rl_add_undo (UNDO_DELETE, from, to, text);
+  else
+    xfree (text);
+
+  rl_end -= diff;
+  rl_line_buffer[rl_end] = '\0';
+  _rl_fix_mark ();
+  return (diff);
+}
+
+/* Fix up point so that it is within the line boundaries after killing
+   text.  If FIX_MARK_TOO is non-zero, the mark is forced within line
+   boundaries also. */
+
+#define _RL_FIX_POINT(x) \
+	do { \
+	if (x > rl_end) \
+	  x = rl_end; \
+	else if (x < 0) \
+	  x = 0; \
+	} while (0)
+
+void
+_rl_fix_point (int fix_mark_too)
+{
+  _RL_FIX_POINT (rl_point);
+  if (fix_mark_too)
+    _RL_FIX_POINT (rl_mark);
+}
+
+void
+_rl_fix_mark (void)
+{
+  _RL_FIX_POINT (rl_mark);
+}
+#undef _RL_FIX_POINT
+
+/* Replace the contents of the line buffer between START and END with
+   TEXT.  The operation is undoable.  To replace the entire line in an
+   undoable mode, use _rl_replace_text(text, 0, rl_end); */
+int
+_rl_replace_text (const char *text, int start, int end)
+{
+  int n;
+
+  n = 0;
+  rl_begin_undo_group ();
+  if (start <= end)
+    rl_delete_text (start, end + 1);
+  rl_point = start;
+  if (*text)
+    n = rl_insert_text (text);
+  rl_end_undo_group ();
+
+  return n;
+}
+
+/* Replace the current line buffer contents with TEXT.  If CLEAR_UNDO is
+   non-zero, we free the current undo list. */
+void
+rl_replace_line (const char *text, int clear_undo)
+{
+  int len;
+
+  len = strlen (text);
+  if (len >= rl_line_buffer_len)
+    rl_extend_line_buffer (len);
+  strcpy (rl_line_buffer, text);
+  rl_end = len;
+
+  if (clear_undo)
+    rl_free_undo_list ();
+
+  _rl_fix_point (1);
+}
+
+/* **************************************************************** */
+/*								    */
+/*			Readline character functions		    */
+/*								    */
+/* **************************************************************** */
+
+/* This is not a gap editor, just a stupid line input routine.  No hair
+   is involved in writing any of the functions, and none should be. */
+
+/* Note that:
+
+   rl_end is the place in the string that we would place '\0';
+   i.e., it is always safe to place '\0' there.
+
+   rl_point is the place in the string where the cursor is.  Sometimes
+   this is the same as rl_end.
+
+   Any command that is called interactively receives two arguments.
+   The first is a count: the numeric arg passed to this command.
+   The second is the key which invoked this command.
+*/
+
+/* **************************************************************** */
+/*								    */
+/*			Movement Commands			    */
+/*								    */
+/* **************************************************************** */
+
+/* Note that if you `optimize' the display for these functions, you cannot
+   use said functions in other functions which do not do optimizing display.
+   I.e., you will have to update the data base for rl_redisplay, and you
+   might as well let rl_redisplay do that job. */
+
+/* Move forward COUNT bytes. */
+int
+rl_forward_byte (int count, int key)
+{
+  if (count < 0)
+    return (rl_backward_byte (-count, key));
+
+  if (count > 0)
+    {
+      int end, lend;
+
+      end = rl_point + count;
+#if defined (VI_MODE)
+      lend = rl_end > 0 ? rl_end - (VI_COMMAND_MODE()) : rl_end;
+#else
+      lend = rl_end;
+#endif
+
+      if (end > lend)
+	{
+	  rl_point = lend;
+	  rl_ding ();
+	}
+      else
+	rl_point = end;
+    }
+
+  if (rl_end < 0)
+    rl_end = 0;
+
+  return 0;
+}
+
+int
+_rl_forward_char_internal (int count)
+{
+  int point;
+
+#if defined (HANDLE_MULTIBYTE)
+  point = _rl_find_next_mbchar (rl_line_buffer, rl_point, count, MB_FIND_NONZERO);
+
+#if defined (VI_MODE)
+  if (point >= rl_end && VI_COMMAND_MODE())
+    point = _rl_find_prev_mbchar (rl_line_buffer, rl_end, MB_FIND_NONZERO);
+#endif
+
+    if (rl_end < 0)
+      rl_end = 0;
+#else
+  point = rl_point + count;
+#endif
+
+  if (point > rl_end)
+    point = rl_end;
+  return (point);
+}
+
+int
+_rl_backward_char_internal (int count)
+{
+  int point;
+
+  point = rl_point;
+#if defined (HANDLE_MULTIBYTE)
+  if (count > 0)
+    {
+      while (count > 0 && point > 0)
+	{
+	  point = _rl_find_prev_mbchar (rl_line_buffer, point, MB_FIND_NONZERO);
+	  count--;
+	}
+      if (count > 0)
+        return 0;	/* XXX - rl_ding() here? */
+    }
+#else
+  if (count > 0)
+    point -= count;
+#endif
+
+  if (point < 0)
+    point = 0;
+  return (point);
+}
+
+#if defined (HANDLE_MULTIBYTE)
+/* Move forward COUNT characters. */
+int
+rl_forward_char (int count, int key)
+{
+  int point;
+
+  if (MB_CUR_MAX == 1 || rl_byte_oriented)
+    return (rl_forward_byte (count, key));
+
+  if (count < 0)
+    return (rl_backward_char (-count, key));
+
+  if (count > 0)
+    {
+      if (rl_point == rl_end && EMACS_MODE())
+	{
+	  rl_ding ();
+	  return 0;
+	}
+
+      point = _rl_forward_char_internal (count);
+
+      if (rl_point == point)
+	rl_ding ();
+
+      rl_point = point;
+    }
+
+  return 0;
+}
+#else /* !HANDLE_MULTIBYTE */
+int
+rl_forward_char (int count, int key)
+{
+  return (rl_forward_byte (count, key));
+}
+#endif /* !HANDLE_MULTIBYTE */
+  
+/* Backwards compatibility. */
+int
+rl_forward (int count, int key)
+{
+  return (rl_forward_char (count, key));
+}
+
+/* Move backward COUNT bytes. */
+int
+rl_backward_byte (int count, int key)
+{
+  if (count < 0)
+    return (rl_forward_byte (-count, key));
+
+  if (count > 0)
+    {
+      if (rl_point < count)
+	{
+	  rl_point = 0;
+	  rl_ding ();
+	}
+      else
+	rl_point -= count;
+    }
+
+  if (rl_point < 0)
+    rl_point = 0;
+
+  return 0;
+}
+
+#if defined (HANDLE_MULTIBYTE)
+/* Move backward COUNT characters. */
+int
+rl_backward_char (int count, int key)
+{
+  int point;
+
+  if (MB_CUR_MAX == 1 || rl_byte_oriented)
+    return (rl_backward_byte (count, key));
+
+  if (count < 0)
+    return (rl_forward_char (-count, key));
+
+  if (count > 0)
+    {
+      point = rl_point;
+
+      while (count > 0 && point > 0)
+	{
+	  point = _rl_find_prev_mbchar (rl_line_buffer, point, MB_FIND_NONZERO);
+	  count--;
+	}
+      if (count > 0)
+	{
+	  rl_point = 0;
+	  rl_ding ();
+	}
+      else
+        rl_point = point;
+    }
+
+  return 0;
+}
+#else
+int
+rl_backward_char (int count, int key)
+{
+  return (rl_backward_byte (count, key));
+}
+#endif
+
+/* Backwards compatibility. */
+int
+rl_backward (int count, int key)
+{
+  return (rl_backward_char (count, key));
+}
+
+/* Move to the beginning of the line. */
+int
+rl_beg_of_line (int count, int key)
+{
+  rl_point = 0;
+  return 0;
+}
+
+/* Move to the end of the line. */
+int
+rl_end_of_line (int count, int key)
+{
+  rl_point = rl_end;
+  return 0;
+}
+
+/* Move forward a word.  We do what Emacs does.  Handles multibyte chars. */
+int
+rl_forward_word (int count, int key)
+{
+  int c;
+
+  if (count < 0)
+    return (rl_backward_word (-count, key));
+
+  while (count)
+    {
+      if (rl_point > rl_end)
+	rl_point = rl_end;
+      if (rl_point == rl_end)
+	return 0;
+
+      /* If we are not in a word, move forward until we are in one.
+	 Then, move forward until we hit a non-alphabetic character. */
+      c = _rl_char_value (rl_line_buffer, rl_point);
+
+      if (_rl_walphabetic (c) == 0)
+	{
+	  rl_point = MB_NEXTCHAR (rl_line_buffer, rl_point, 1, MB_FIND_NONZERO);
+	  while (rl_point < rl_end)
+	    {
+	      c = _rl_char_value (rl_line_buffer, rl_point);
+	      if (_rl_walphabetic (c))
+		break;
+	      rl_point = MB_NEXTCHAR (rl_line_buffer, rl_point, 1, MB_FIND_NONZERO);
+	    }
+	}
+
+      if (rl_point > rl_end)
+	rl_point = rl_end;
+      if (rl_point == rl_end)
+	return 0;
+
+      rl_point = MB_NEXTCHAR (rl_line_buffer, rl_point, 1, MB_FIND_NONZERO);
+      while (rl_point < rl_end)
+	{
+	  c = _rl_char_value (rl_line_buffer, rl_point);
+	  if (_rl_walphabetic (c) == 0)
+	    break;
+	  rl_point = MB_NEXTCHAR (rl_line_buffer, rl_point, 1, MB_FIND_NONZERO);
+	}
+
+      --count;
+    }
+
+  return 0;
+}
+
+/* Move backward a word.  We do what Emacs does.  Handles multibyte chars. */
+int
+rl_backward_word (int count, int key)
+{
+  int c, p;
+
+  if (count < 0)
+    return (rl_forward_word (-count, key));
+
+  while (count)
+    {
+      if (rl_point == 0)
+	return 0;
+
+      /* Like rl_forward_word (), except that we look at the characters
+	 just before point. */
+
+      p = MB_PREVCHAR (rl_line_buffer, rl_point, MB_FIND_NONZERO);
+      c = _rl_char_value (rl_line_buffer, p);
+
+      if (_rl_walphabetic (c) == 0)
+	{
+	  rl_point = p;
+	  while (rl_point > 0)
+	    {
+	      p = MB_PREVCHAR (rl_line_buffer, rl_point, MB_FIND_NONZERO);
+	      c = _rl_char_value (rl_line_buffer, p);
+	      if (_rl_walphabetic (c))
+		break;
+	      rl_point = p;
+	    }
+	}
+
+      while (rl_point)
+	{
+	  p = MB_PREVCHAR (rl_line_buffer, rl_point, MB_FIND_NONZERO);
+	  c = _rl_char_value (rl_line_buffer, p);	  
+	  if (_rl_walphabetic (c) == 0)
+	    break;
+	  else
+	    rl_point = p;
+	}
+
+      --count;
+    }
+
+  return 0;
+}
+
+/* Clear the current line.  Numeric argument to C-l does this. */
+int
+rl_refresh_line (int ignore1, int ignore2)
+{
+  _rl_refresh_line ();
+  rl_display_fixed = 1;
+  return 0;
+}
+
+/* C-l typed to a line without quoting clears the screen, and then reprints
+   the prompt and the current input line.  Given a numeric arg, redraw only
+   the current line. */
+int
+rl_clear_screen (int count, int key)
+{
+  if (rl_explicit_arg)
+    {
+      rl_refresh_line (count, key);
+      return 0;
+    }
+
+  _rl_clear_screen (0);		/* calls termcap function to clear screen */
+  rl_keep_mark_active ();
+  rl_forced_update_display ();
+  rl_display_fixed = 1;
+
+  return 0;
+}
+
+int
+rl_clear_display (int count, int key)
+{
+  _rl_clear_screen (1);		/* calls termcap function to clear screen and scrollback buffer */
+  rl_forced_update_display ();
+  rl_display_fixed = 1;
+
+  return 0;
+}
+
+int
+rl_previous_screen_line (int count, int key)
+{
+  int c;
+
+  c = _rl_term_autowrap ? _rl_screenwidth : (_rl_screenwidth + 1);
+  return (rl_backward_char (c, key));
+}
+
+int
+rl_next_screen_line (int count, int key)
+{
+  int c;
+
+  c = _rl_term_autowrap ? _rl_screenwidth : (_rl_screenwidth + 1);
+  return (rl_forward_char (c, key));
+}
+
+int
+rl_skip_csi_sequence (int count, int key)
+{
+  int ch;
+
+  RL_SETSTATE (RL_STATE_MOREINPUT);
+  do
+    ch = rl_read_key ();
+  while (ch >= 0x20 && ch < 0x40);
+  RL_UNSETSTATE (RL_STATE_MOREINPUT);
+
+  return (ch < 0);
+}
+
+int
+rl_arrow_keys (int count, int key)
+{
+  int ch;
+
+  RL_SETSTATE(RL_STATE_MOREINPUT);
+  ch = rl_read_key ();
+  RL_UNSETSTATE(RL_STATE_MOREINPUT);
+  if (ch < 0)
+    return (1);
+
+  switch (_rl_to_upper (ch))
+    {
+    case 'A':
+      rl_get_previous_history (count, ch);
+      break;
+
+    case 'B':
+      rl_get_next_history (count, ch);
+      break;
+
+    case 'C':
+      if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+	rl_forward_char (count, ch);
+      else
+	rl_forward_byte (count, ch);
+      break;
+
+    case 'D':
+      if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+	rl_backward_char (count, ch);
+      else
+	rl_backward_byte (count, ch);
+      break;
+
+    default:
+      rl_ding ();
+    }
+
+  return 0;
+}
+
+/* **************************************************************** */
+/*								    */
+/*			Text commands				    */
+/*								    */
+/* **************************************************************** */
+
+#ifdef HANDLE_MULTIBYTE
+static char pending_bytes[MB_LEN_MAX];
+static int pending_bytes_length = 0;
+static mbstate_t ps = {0};
+#endif
+
+/* Insert the character C at the current location, moving point forward.
+   If C introduces a multibyte sequence, we read the whole sequence and
+   then insert the multibyte char into the line buffer. */
+int
+_rl_insert_char (int count, int c)
+{
+  register int i;
+  char *string;
+#ifdef HANDLE_MULTIBYTE
+  int string_size;
+  char incoming[MB_LEN_MAX + 1];
+  int incoming_length = 0;
+  mbstate_t ps_back;
+  static int stored_count = 0;
+#endif
+
+  if (count <= 0)
+    return 0;
+
+#if defined (HANDLE_MULTIBYTE)
+  if (MB_CUR_MAX == 1 || rl_byte_oriented)
+    {
+      incoming[0] = c;
+      incoming[1] = '\0';
+      incoming_length = 1;
+    }
+  else if (_rl_utf8locale && (c & 0x80) == 0)
+    {
+      incoming[0] = c;
+      incoming[1] = '\0';
+      incoming_length = 1;
+    }
+  else
+    {
+      wchar_t wc;
+      size_t ret;
+
+      if (stored_count <= 0)
+	stored_count = count;
+      else
+	count = stored_count;
+
+      ps_back = ps;
+      pending_bytes[pending_bytes_length++] = c;
+      ret = mbrtowc (&wc, pending_bytes, pending_bytes_length, &ps);
+
+      if (ret == (size_t)-2)
+	{
+	  /* Bytes too short to compose character, try to wait for next byte.
+	     Restore the state of the byte sequence, because in this case the
+	     effect of mbstate is undefined. */
+	  ps = ps_back;
+	  return 1;
+	}
+      else if (ret == (size_t)-1)
+	{
+	  /* Invalid byte sequence for the current locale.  Treat first byte
+	     as a single character. */
+	  incoming[0] = pending_bytes[0];
+	  incoming[1] = '\0';
+	  incoming_length = 1;
+	  pending_bytes_length--;
+	  memmove (pending_bytes, pending_bytes + 1, pending_bytes_length);
+	  /* Clear the state of the byte sequence, because in this case the
+	     effect of mbstate is undefined. */
+	  memset (&ps, 0, sizeof (mbstate_t));
+	}
+      else if (ret == (size_t)0)
+	{
+	  incoming[0] = '\0';
+	  incoming_length = 0;
+	  pending_bytes_length--;
+	  /* Clear the state of the byte sequence, because in this case the
+	     effect of mbstate is undefined. */
+	  memset (&ps, 0, sizeof (mbstate_t));
+	}
+      else if (ret == 1)
+	{
+	  incoming[0] = pending_bytes[0];
+	  incoming[incoming_length = 1] = '\0';
+	  pending_bytes_length = 0;
+	}
+      else
+	{
+	  /* We successfully read a single multibyte character. */
+	  memcpy (incoming, pending_bytes, pending_bytes_length);
+	  incoming[pending_bytes_length] = '\0';
+	  incoming_length = pending_bytes_length;
+	  pending_bytes_length = 0;
+	}
+    }
+#endif /* HANDLE_MULTIBYTE */
+	  
+  /* If we can optimize, then do it.  But don't let people crash
+     readline because of extra large arguments. */
+  if (count > 1 && count <= TEXT_COUNT_MAX)
+    {
+#if defined (HANDLE_MULTIBYTE)
+      string_size = count * incoming_length;
+      string = (char *)xmalloc (1 + string_size);
+
+      i = 0;
+      while (i < string_size)
+	{
+	  if (incoming_length == 1)
+	    string[i++] = *incoming;
+	  else
+	    {
+	      strncpy (string + i, incoming, incoming_length);
+	      i += incoming_length;
+	    }
+	}
+      incoming_length = 0;
+      stored_count = 0;
+#else /* !HANDLE_MULTIBYTE */
+      string = (char *)xmalloc (1 + count);
+
+      for (i = 0; i < count; i++)
+	string[i] = c;
+#endif /* !HANDLE_MULTIBYTE */
+
+      string[i] = '\0';
+      rl_insert_text (string);
+      xfree (string);
+
+      return 0;
+    }
+
+  if (count > TEXT_COUNT_MAX)
+    {
+      int decreaser;
+#if defined (HANDLE_MULTIBYTE)
+      string_size = incoming_length * TEXT_COUNT_MAX;
+      string = (char *)xmalloc (1 + string_size);
+
+      i = 0;
+      while (i < string_size)
+	{
+	  if (incoming_length == 1)
+	    string[i++] = *incoming;
+	  else
+	    {
+	      strncpy (string + i, incoming, incoming_length);
+	      i += incoming_length;
+	    }
+	}
+
+      while (count)
+	{
+	  decreaser = (count > TEXT_COUNT_MAX) ? TEXT_COUNT_MAX : count;
+	  string[decreaser*incoming_length] = '\0';
+	  rl_insert_text (string);
+	  count -= decreaser;
+	}
+
+      xfree (string);
+      incoming_length = 0;
+      stored_count = 0;
+#else /* !HANDLE_MULTIBYTE */
+      char str[TEXT_COUNT_MAX+1];
+
+      for (i = 0; i < TEXT_COUNT_MAX; i++)
+	str[i] = c;
+
+      while (count)
+	{
+	  decreaser = (count > TEXT_COUNT_MAX ? TEXT_COUNT_MAX : count);
+	  str[decreaser] = '\0';
+	  rl_insert_text (str);
+	  count -= decreaser;
+	}
+#endif /* !HANDLE_MULTIBYTE */
+
+      return 0;
+    }
+
+  if (MB_CUR_MAX == 1 || rl_byte_oriented)
+    {
+      /* We are inserting a single character.
+	 If there is pending input, then make a string of all of the
+	 pending characters that are bound to rl_insert, and insert
+	 them all.  Don't do this if we're current reading input from
+	 a macro. */
+      if ((RL_ISSTATE (RL_STATE_MACROINPUT) == 0) && _rl_pushed_input_available ())
+	_rl_insert_typein (c);
+      else
+	{
+	  /* Inserting a single character. */
+	  char str[2];
+
+	  str[1] = '\0';
+	  str[0] = c;
+	  rl_insert_text (str);
+	}
+    }
+#if defined (HANDLE_MULTIBYTE)
+  else
+    {
+      rl_insert_text (incoming);
+      stored_count = 0;
+    }
+#endif
+
+  return 0;
+}
+
+/* Overwrite the character at point (or next COUNT characters) with C.
+   If C introduces a multibyte character sequence, read the entire sequence
+   before starting the overwrite loop. */
+int
+_rl_overwrite_char (int count, int c)
+{
+  int i;
+#if defined (HANDLE_MULTIBYTE)
+  char mbkey[MB_LEN_MAX];
+  int k;
+
+  /* Read an entire multibyte character sequence to insert COUNT times. */
+  if (count > 0 && MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+    k = _rl_read_mbstring (c, mbkey, MB_LEN_MAX);
+#endif
+
+  rl_begin_undo_group ();
+
+  for (i = 0; i < count; i++)
+    {
+#if defined (HANDLE_MULTIBYTE)
+      if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+	rl_insert_text (mbkey);
+      else
+#endif
+	_rl_insert_char (1, c);
+
+      if (rl_point < rl_end)
+	rl_delete (1, c);
+    }
+
+  rl_end_undo_group ();
+
+  return 0;
+}
+
+int
+rl_insert (int count, int c)
+{
+  int r, n, x;
+
+  r = (rl_insert_mode == RL_IM_INSERT) ? _rl_insert_char (count, c) : _rl_overwrite_char (count, c);
+
+  /* XXX -- attempt to batch-insert pending input that maps to self-insert */
+  x = 0;
+  n = (unsigned short)-2;
+  while (_rl_optimize_typeahead &&
+	 rl_num_chars_to_read == 0 &&
+	 (RL_ISSTATE (RL_STATE_INPUTPENDING|RL_STATE_MACROINPUT) == 0) &&
+	 _rl_pushed_input_available () == 0 &&
+	 _rl_input_queued (0) &&
+	 (n = rl_read_key ()) > 0 &&
+	 _rl_keymap[(unsigned char)n].type == ISFUNC &&
+	 _rl_keymap[(unsigned char)n].function == rl_insert)
+    {
+      r = (rl_insert_mode == RL_IM_INSERT) ? _rl_insert_char (1, n) : _rl_overwrite_char (1, n);
+      /* _rl_insert_char keeps its own set of pending characters to compose a
+	 complete multibyte character, and only returns 1 if it sees a character
+	 that's part of a multibyte character but too short to complete one.  We
+	 can try to read another character in the hopes that we will get the
+	 next one or just punt.  Right now we try to read another character.
+	 We don't want to call rl_insert_next if _rl_insert_char has already
+	 stored the character in the pending_bytes array because that will
+	 result in doubled input. */
+      n = (unsigned short)-2;
+      x++;		/* count of bytes of typeahead read, currently unused */
+      if (r == 1)	/* read partial multibyte character */
+	continue;
+      if (rl_done || r != 0)
+	break;
+    }
+
+  if (n != (unsigned short)-2)		/* -2 = sentinel value for having inserted N */
+    {
+      /* setting rl_pending_input inhibits setting rl_last_func so we do it
+	 ourselves here */
+      rl_last_func = rl_insert; 
+      _rl_reset_argument ();
+      rl_executing_keyseq[rl_key_sequence_length = 0] = '\0';
+      r = rl_execute_next (n);
+    }
+
+  return r;
+}
+
+/* Insert the next typed character verbatim. */
+static int
+_rl_insert_next (int count)
+{
+  int c;
+
+  RL_SETSTATE(RL_STATE_MOREINPUT);
+  c = rl_read_key ();
+  RL_UNSETSTATE(RL_STATE_MOREINPUT);
+
+  if (c < 0)
+    return 1;
+
+  if (RL_ISSTATE (RL_STATE_MACRODEF))
+    _rl_add_macro_char (c);
+
+#if defined (HANDLE_SIGNALS)
+  if (RL_ISSTATE (RL_STATE_CALLBACK) == 0)
+    _rl_restore_tty_signals ();
+#endif
+
+  return (_rl_insert_char (count, c));  
+}
+
+#if defined (READLINE_CALLBACKS)
+static int
+_rl_insert_next_callback (_rl_callback_generic_arg *data)
+{
+  int count, r;
+
+  count = data->count;
+  r = 0;
+
+  if (count < 0)
+    {
+      data->count++;
+      r = _rl_insert_next (1);
+      _rl_want_redisplay = 1;
+      /* If we should keep going, leave the callback function installed */
+      if (data->count < 0 && r == 0)
+	return r;
+      count = 0;	/* data->count == 0 || r != 0; force break below */
+    }
+
+  /* Deregister function, let rl_callback_read_char deallocate data */
+  _rl_callback_func = 0;
+  _rl_want_redisplay = 1;
+
+  if (count == 0)
+    return r;
+
+  return _rl_insert_next (count);
+}
+#endif
+  
+int
+rl_quoted_insert (int count, int key)
+{
+  /* Let's see...should the callback interface futz with signal handling? */
+#if defined (HANDLE_SIGNALS)
+  if (RL_ISSTATE (RL_STATE_CALLBACK) == 0)
+    _rl_disable_tty_signals ();
+#endif
+
+#if defined (READLINE_CALLBACKS)
+  if (RL_ISSTATE (RL_STATE_CALLBACK))
+    {
+      _rl_callback_data = _rl_callback_data_alloc (count);
+      _rl_callback_func = _rl_insert_next_callback;
+      return (0);
+    }
+#endif
+
+  /* A negative count means to quote the next -COUNT characters. */
+  if (count < 0)
+    {
+      int r;
+
+      do
+	r = _rl_insert_next (1);
+      while (r == 0 && ++count < 0);
+      return r;
+    }
+
+  return _rl_insert_next (count);
+}
+
+/* Insert a tab character. */
+int
+rl_tab_insert (int count, int key)
+{
+  return (_rl_insert_char (count, '\t'));
+}
+
+/* What to do when a NEWLINE is pressed.  We accept the whole line.
+   KEY is the key that invoked this command.  I guess it could have
+   meaning in the future. */
+int
+rl_newline (int count, int key)
+{
+  if (rl_mark_active_p ())
+    {
+      rl_deactivate_mark ();
+      (*rl_redisplay_function) ();
+      _rl_want_redisplay = 0;
+    }
+
+  rl_done = 1;
+
+  if (_rl_history_preserve_point)
+    _rl_history_saved_point = (rl_point == rl_end) ? -1 : rl_point;
+
+  RL_SETSTATE(RL_STATE_DONE);
+
+#if defined (VI_MODE)
+  if (rl_editing_mode == vi_mode)
+    {
+      _rl_vi_done_inserting ();
+      if (_rl_vi_textmod_command (_rl_vi_last_command) == 0)	/* XXX */
+	_rl_vi_reset_last ();
+    }
+#endif /* VI_MODE */
+
+  /* If we've been asked to erase empty lines, suppress the final update,
+     since _rl_update_final calls rl_crlf(). */
+  if (rl_erase_empty_line && rl_point == 0 && rl_end == 0)
+    return 0;
+
+  if (_rl_echoing_p)
+    _rl_update_final ();
+  return 0;
+}
+
+/* What to do for some uppercase characters, like meta characters,
+   and some characters appearing in emacs_ctlx_keymap.  This function
+   is just a stub, you bind keys to it and the code in _rl_dispatch ()
+   is special cased. */
+int
+rl_do_lowercase_version (int ignore1, int ignore2)
+{
+  return 0;
+}
+
+/* This is different from what vi does, so the code's not shared.  Emacs
+   rubout in overwrite mode has one oddity:  it replaces a control
+   character that's displayed as two characters (^X) with two spaces. */
+int
+_rl_overwrite_rubout (int count, int key)
+{
+  int opoint;
+  int i, l;
+
+  if (rl_point == 0)
+    {
+      rl_ding ();
+      return 1;
+    }
+
+  opoint = rl_point;
+
+  /* L == number of spaces to insert */
+  for (i = l = 0; i < count; i++)
+    {
+      rl_backward_char (1, key);
+      l += rl_character_len (rl_line_buffer[rl_point], rl_point);	/* not exactly right */
+    }
+
+  rl_begin_undo_group ();
+
+  if (count > 1 || rl_explicit_arg)
+    rl_kill_text (opoint, rl_point);
+  else
+    rl_delete_text (opoint, rl_point);
+
+  /* Emacs puts point at the beginning of the sequence of spaces. */
+  if (rl_point < rl_end)
+    {
+      opoint = rl_point;
+      _rl_insert_char (l, ' ');
+      rl_point = opoint;
+    }
+
+  rl_end_undo_group ();
+
+  return 0;
+}
+  
+/* Rubout the character behind point. */
+int
+rl_rubout (int count, int key)
+{
+  if (count < 0)
+    return (rl_delete (-count, key));
+
+  if (!rl_point)
+    {
+      rl_ding ();
+      return 1;
+    }
+
+  if (rl_insert_mode == RL_IM_OVERWRITE)
+    return (_rl_overwrite_rubout (count, key));
+
+  return (_rl_rubout_char (count, key));
+}
+
+int
+_rl_rubout_char (int count, int key)
+{
+  int orig_point;
+  unsigned char c;
+
+  /* Duplicated code because this is called from other parts of the library. */
+  if (count < 0)
+    return (rl_delete (-count, key));
+
+  if (rl_point == 0)
+    {
+      rl_ding ();
+      return 1;
+    }
+
+  orig_point = rl_point;
+  if (count > 1 || rl_explicit_arg)
+    {
+      rl_backward_char (count, key);
+      rl_kill_text (orig_point, rl_point);
+    }
+  else if (MB_CUR_MAX == 1 || rl_byte_oriented)
+    {
+      c = rl_line_buffer[--rl_point];
+      rl_delete_text (rl_point, orig_point);
+      /* The erase-at-end-of-line hack is of questionable merit now. */
+      if (rl_point == rl_end && ISPRINT ((unsigned char)c) && _rl_last_c_pos)
+	{
+	  int l;
+	  l = rl_character_len (c, rl_point);
+	  _rl_erase_at_end_of_line (l);
+	}
+    }
+  else
+    {
+      rl_point = _rl_find_prev_mbchar (rl_line_buffer, rl_point, MB_FIND_NONZERO);
+      rl_delete_text (rl_point, orig_point);
+    }
+
+  return 0;
+}
+
+/* Delete the character under the cursor.  Given a numeric argument,
+   kill that many characters instead. */
+int
+rl_delete (int count, int key)
+{
+  int xpoint;
+
+  if (count < 0)
+    return (_rl_rubout_char (-count, key));
+
+  if (rl_point == rl_end)
+    {
+      rl_ding ();
+      return 1;
+    }
+
+  if (count > 1 || rl_explicit_arg)
+    {
+      xpoint = rl_point;
+      if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+	rl_forward_char (count, key);
+      else
+	rl_forward_byte (count, key);
+
+      rl_kill_text (xpoint, rl_point);
+      rl_point = xpoint;
+    }
+  else
+    {
+      xpoint = MB_NEXTCHAR (rl_line_buffer, rl_point, 1, MB_FIND_NONZERO);
+      rl_delete_text (rl_point, xpoint);
+    }
+  return 0;
+}
+
+/* Delete the character under the cursor, unless the insertion
+   point is at the end of the line, in which case the character
+   behind the cursor is deleted.  COUNT is obeyed and may be used
+   to delete forward or backward that many characters. */      
+int
+rl_rubout_or_delete (int count, int key)
+{
+  if (rl_end != 0 && rl_point == rl_end)
+    return (_rl_rubout_char (count, key));
+  else
+    return (rl_delete (count, key));
+}  
+
+/* Delete all spaces and tabs around point. */
+int
+rl_delete_horizontal_space (int count, int ignore)
+{
+  int start;
+
+  while (rl_point && whitespace (rl_line_buffer[rl_point - 1]))
+    rl_point--;
+
+  start = rl_point;
+
+  while (rl_point < rl_end && whitespace (rl_line_buffer[rl_point]))
+    rl_point++;
+
+  if (start != rl_point)
+    {
+      rl_delete_text (start, rl_point);
+      rl_point = start;
+    }
+
+  if (rl_point < 0)
+    rl_point = 0;
+
+  return 0;
+}
+
+/* Like the tcsh editing function delete-char-or-list.  The eof character
+   is caught before this is invoked, so this really does the same thing as
+   delete-char-or-list-or-eof, as long as it's bound to the eof character. */
+int
+rl_delete_or_show_completions (int count, int key)
+{
+  if (rl_end != 0 && rl_point == rl_end)
+    return (rl_possible_completions (count, key));
+  else
+    return (rl_delete (count, key));
+}
+
+#ifndef RL_COMMENT_BEGIN_DEFAULT
+#define RL_COMMENT_BEGIN_DEFAULT "#"
+#endif
+
+/* Turn the current line into a comment in shell history.
+   A K*rn shell style function. */
+int
+rl_insert_comment (int count, int key)
+{
+  char *rl_comment_text;
+  int rl_comment_len;
+
+  rl_beg_of_line (1, key);
+  rl_comment_text = _rl_comment_begin ? _rl_comment_begin : RL_COMMENT_BEGIN_DEFAULT;
+
+  if (rl_explicit_arg == 0)
+    rl_insert_text (rl_comment_text);
+  else
+    {
+      rl_comment_len = strlen (rl_comment_text);
+      if (STREQN (rl_comment_text, rl_line_buffer, rl_comment_len))
+	rl_delete_text (rl_point, rl_point + rl_comment_len);
+      else
+	rl_insert_text (rl_comment_text);
+    }
+
+  (*rl_redisplay_function) ();
+  rl_newline (1, '\n');
+
+  return (0);
+}
+
+/* **************************************************************** */
+/*								    */
+/*			Changing Case				    */
+/*								    */
+/* **************************************************************** */
+
+/* The three kinds of things that we know how to do. */
+#define UpCase 1
+#define DownCase 2
+#define CapCase 3
+
+/* Uppercase the word at point. */
+int
+rl_upcase_word (int count, int key)
+{
+  return (rl_change_case (count, UpCase));
+}
+
+/* Lowercase the word at point. */
+int
+rl_downcase_word (int count, int key)
+{
+  return (rl_change_case (count, DownCase));
+}
+
+/* Upcase the first letter, downcase the rest. */
+int
+rl_capitalize_word (int count, int key)
+{
+ return (rl_change_case (count, CapCase));
+}
+
+/* The meaty function.
+   Change the case of COUNT words, performing OP on them.
+   OP is one of UpCase, DownCase, or CapCase.
+   If a negative argument is given, leave point where it started,
+   otherwise, leave it where it moves to. */
+static int
+rl_change_case (int count, int op)
+{
+  int start, next, end;
+  int inword, nc, nop;
+  wchar_t c;
+#if defined (HANDLE_MULTIBYTE)
+  wchar_t wc, nwc;
+  char mb[MB_LEN_MAX+1];
+  int mlen;
+  size_t m;
+  mbstate_t mps;
+#endif
+
+  start = rl_point;
+  rl_forward_word (count, 0);
+  end = rl_point;
+
+  if (op != UpCase && op != DownCase && op != CapCase)
+    {
+      rl_ding ();
+      return 1;
+    }
+
+  if (count < 0)
+    SWAP (start, end);
+
+#if defined (HANDLE_MULTIBYTE)
+  memset (&mps, 0, sizeof (mbstate_t));
+#endif
+
+  /* We are going to modify some text, so let's prepare to undo it. */
+  rl_modifying (start, end);
+
+  inword = 0;
+  while (start < end)
+    {
+      c = _rl_char_value (rl_line_buffer, start);
+      /*  This assumes that the upper and lower case versions are the same width. */
+      next = MB_NEXTCHAR (rl_line_buffer, start, 1, MB_FIND_NONZERO);
+
+      if (_rl_walphabetic (c) == 0)
+	{
+	  inword = 0;
+	  start = next;
+	  continue;
+	}
+
+      if (op == CapCase)
+	{
+	  nop = inword ? DownCase : UpCase;
+	  inword = 1;
+	}
+      else
+	nop = op;
+      /* Can't check isascii here; some languages (e.g, Turkish) have
+	 multibyte upper and lower case equivalents of single-byte ascii
+	 characters */
+      if (MB_CUR_MAX == 1 || rl_byte_oriented)
+	{
+	  nc = (nop == UpCase) ? _rl_to_upper (c) : _rl_to_lower (c);
+	  rl_line_buffer[start] = nc;
+	}
+#if defined (HANDLE_MULTIBYTE)
+      else
+	{
+	  m = mbrtowc (&wc, rl_line_buffer + start, end - start, &mps);
+	  if (MB_INVALIDCH (m))
+	    wc = (wchar_t)rl_line_buffer[start];
+	  else if (MB_NULLWCH (m))
+	    wc = L'\0';
+	  nwc = (nop == UpCase) ? _rl_to_wupper (wc) : _rl_to_wlower (wc);
+	  if  (nwc != wc)	/*  just skip unchanged characters */
+	    {
+	      char *s, *e;
+	      mbstate_t ts;
+
+	      memset (&ts, 0, sizeof (mbstate_t));
+	      mlen = wcrtomb (mb, nwc, &ts);
+	      if (mlen < 0)
+		{
+		  nwc = wc;
+		  memset (&ts, 0, sizeof (mbstate_t));
+		  mlen = wcrtomb (mb, nwc, &ts);
+		  if (mlen < 0)		/* should not happen */
+		    strncpy (mb, rl_line_buffer + start, mlen = m);
+		}
+	      if (mlen > 0)
+		mb[mlen] = '\0';
+	      /* what to do if m != mlen? adjust below */
+	      /* m == length of old char, mlen == length of new char */
+	      s = rl_line_buffer + start;
+	      e = rl_line_buffer + rl_end;
+	      if (m == mlen)
+		memcpy (s, mb, mlen);
+	      else if (m > mlen)
+		{
+		  memcpy (s, mb, mlen);
+		  memmove (s + mlen, s + m, (e - s) - m);
+		  next -= m - mlen;	/* next char changes */
+		  end -= m - mlen;	/* end of word changes */
+		  rl_end -= m - mlen;	/* end of line changes */
+		  rl_line_buffer[rl_end] = 0;
+		}
+	      else if (m < mlen)
+		{
+		  rl_extend_line_buffer (rl_end + mlen + (e - s) - m + 2);
+		  s = rl_line_buffer + start;	/* have to redo this */
+		  e = rl_line_buffer + rl_end;
+		  memmove (s + mlen, s + m, (e - s) - m);
+		  memcpy (s, mb, mlen);
+		  next += mlen - m;	/* next char changes */
+		  end += mlen - m;	/* end of word changes */
+		  rl_end += mlen - m;	/* end of line changes */
+		  rl_line_buffer[rl_end] = 0;
+		}
+	    }
+	}
+#endif
+
+      start = next;
+    }
+
+  rl_point = end;
+  return 0;
+}
+
+/* **************************************************************** */
+/*								    */
+/*			Transposition				    */
+/*								    */
+/* **************************************************************** */
+
+/* Transpose the words at point.  If point is at the end of the line,
+   transpose the two words before point. */
+int
+rl_transpose_words (int count, int key)
+{
+  char *word1, *word2;
+  int w1_beg, w1_end, w2_beg, w2_end;
+  int orig_point = rl_point;
+
+  if (!count)
+    return 0;
+
+  /* Find the two words. */
+  rl_forward_word (count, key);
+  w2_end = rl_point;
+  rl_backward_word (1, key);
+  w2_beg = rl_point;
+  rl_backward_word (count, key);
+  w1_beg = rl_point;
+  rl_forward_word (1, key);
+  w1_end = rl_point;
+
+  /* Do some check to make sure that there really are two words. */
+  if ((w1_beg == w2_beg) || (w2_beg < w1_end))
+    {
+      rl_ding ();
+      rl_point = orig_point;
+      return 1;
+    }
+
+  /* Get the text of the words. */
+  word1 = rl_copy_text (w1_beg, w1_end);
+  word2 = rl_copy_text (w2_beg, w2_end);
+
+  /* We are about to do many insertions and deletions.  Remember them
+     as one operation. */
+  rl_begin_undo_group ();
+
+  /* Do the stuff at word2 first, so that we don't have to worry
+     about word1 moving. */
+  rl_point = w2_beg;
+  rl_delete_text (w2_beg, w2_end);
+  rl_insert_text (word1);
+
+  rl_point = w1_beg;
+  rl_delete_text (w1_beg, w1_end);
+  rl_insert_text (word2);
+
+  /* This is exactly correct since the text before this point has not
+     changed in length. */
+  rl_point = w2_end;
+
+  /* I think that does it. */
+  rl_end_undo_group ();
+  xfree (word1);
+  xfree (word2);
+
+  return 0;
+}
+
+/* Transpose the characters at point.  If point is at the end of the line,
+   then transpose the characters before point. */
+int
+rl_transpose_chars (int count, int key)
+{
+#if defined (HANDLE_MULTIBYTE)
+  char *dummy;
+  int i;
+#else
+  char dummy[2];
+#endif
+  int char_length, prev_point;
+
+  if (count == 0)
+    return 0;
+
+  if (!rl_point || rl_end < 2)
+    {
+      rl_ding ();
+      return 1;
+    }
+
+  rl_begin_undo_group ();
+
+  if (rl_point == rl_end)
+    {
+      rl_point = MB_PREVCHAR (rl_line_buffer, rl_point, MB_FIND_NONZERO);
+      count = 1;
+    }
+
+  prev_point = rl_point;
+  rl_point = MB_PREVCHAR (rl_line_buffer, rl_point, MB_FIND_NONZERO);
+
+#if defined (HANDLE_MULTIBYTE)
+  char_length = prev_point - rl_point;
+  dummy = (char *)xmalloc (char_length + 1);
+  for (i = 0; i < char_length; i++)
+    dummy[i] = rl_line_buffer[rl_point + i];
+  dummy[i] = '\0';
+#else
+  dummy[0] = rl_line_buffer[rl_point];
+  dummy[char_length = 1] = '\0';
+#endif
+
+  rl_delete_text (rl_point, rl_point + char_length);
+
+  rl_point = _rl_find_next_mbchar (rl_line_buffer, rl_point, count, MB_FIND_NONZERO);
+
+  _rl_fix_point (0);
+  rl_insert_text (dummy);
+  rl_end_undo_group ();
+
+#if defined (HANDLE_MULTIBYTE)
+  xfree (dummy);
+#endif
+
+  return 0;
+}
+
+/* **************************************************************** */
+/*								    */
+/*			Character Searching			    */
+/*								    */
+/* **************************************************************** */
+
+int
+#if defined (HANDLE_MULTIBYTE)
+_rl_char_search_internal (int count, int dir, char *smbchar, int len)
+#else
+_rl_char_search_internal (int count, int dir, int schar)
+#endif
+{
+  int pos, inc;
+#if defined (HANDLE_MULTIBYTE)
+  int prepos;
+#endif
+
+  if (dir == 0)
+    return 1;
+
+  pos = rl_point;
+  inc = (dir < 0) ? -1 : 1;
+  while (count)
+    {
+      if ((dir < 0 && pos <= 0) || (dir > 0 && pos >= rl_end))
+	{
+	  rl_ding ();
+	  return 1;
+	}
+
+#if defined (HANDLE_MULTIBYTE)
+      pos = (inc > 0) ? _rl_find_next_mbchar (rl_line_buffer, pos, 1, MB_FIND_ANY)
+		      : _rl_find_prev_mbchar (rl_line_buffer, pos, MB_FIND_ANY);
+#else
+      pos += inc;
+#endif
+      do
+	{
+#if defined (HANDLE_MULTIBYTE)
+	  if (_rl_is_mbchar_matched (rl_line_buffer, pos, rl_end, smbchar, len))
+#else
+	  if (rl_line_buffer[pos] == schar)
+#endif
+	    {
+	      count--;
+	      if (dir < 0)
+	        rl_point = (dir == BTO) ? _rl_find_next_mbchar (rl_line_buffer, pos, 1, MB_FIND_ANY)
+					: pos;
+	      else
+		rl_point = (dir == FTO) ? _rl_find_prev_mbchar (rl_line_buffer, pos, MB_FIND_ANY)
+					: pos;
+	      break;
+	    }
+#if defined (HANDLE_MULTIBYTE)
+	  prepos = pos;
+#endif
+	}
+#if defined (HANDLE_MULTIBYTE)
+      while ((dir < 0) ? (pos = _rl_find_prev_mbchar (rl_line_buffer, pos, MB_FIND_ANY)) != prepos
+		       : (pos = _rl_find_next_mbchar (rl_line_buffer, pos, 1, MB_FIND_ANY)) != prepos);
+#else
+      while ((dir < 0) ? pos-- : ++pos < rl_end);
+#endif
+    }
+  return (0);
+}
+
+/* Search COUNT times for a character read from the current input stream.
+   FDIR is the direction to search if COUNT is non-negative; otherwise
+   the search goes in BDIR.  So much is dependent on HANDLE_MULTIBYTE
+   that there are two separate versions of this function. */
+#if defined (HANDLE_MULTIBYTE)
+static int
+_rl_char_search (int count, int fdir, int bdir)
+{
+  char mbchar[MB_LEN_MAX];
+  int mb_len;
+
+  mb_len = _rl_read_mbchar (mbchar, MB_LEN_MAX);
+
+  if (mb_len <= 0)
+    return 1;
+
+  if (count < 0)
+    return (_rl_char_search_internal (-count, bdir, mbchar, mb_len));
+  else
+    return (_rl_char_search_internal (count, fdir, mbchar, mb_len));
+}
+#else /* !HANDLE_MULTIBYTE */
+static int
+_rl_char_search (int count, int fdir, int bdir)
+{
+  int c;
+
+  c = _rl_bracketed_read_key ();
+  if (c < 0)
+    return 1;
+
+  if (count < 0)
+    return (_rl_char_search_internal (-count, bdir, c));
+  else
+    return (_rl_char_search_internal (count, fdir, c));
+}
+#endif /* !HANDLE_MULTIBYTE */
+
+#if defined (READLINE_CALLBACKS)
+static int
+_rl_char_search_callback (data)
+     _rl_callback_generic_arg *data;
+{
+  _rl_callback_func = 0;
+  _rl_want_redisplay = 1;
+
+  return (_rl_char_search (data->count, data->i1, data->i2));
+}
+#endif
+
+int
+rl_char_search (int count, int key)
+{
+#if defined (READLINE_CALLBACKS)
+  if (RL_ISSTATE (RL_STATE_CALLBACK))
+    {
+      _rl_callback_data = _rl_callback_data_alloc (count);
+      _rl_callback_data->i1 = FFIND;
+      _rl_callback_data->i2 = BFIND;
+      _rl_callback_func = _rl_char_search_callback;
+      return (0);
+    }
+#endif
+  
+  return (_rl_char_search (count, FFIND, BFIND));
+}
+
+int
+rl_backward_char_search (int count, int key)
+{
+#if defined (READLINE_CALLBACKS)
+  if (RL_ISSTATE (RL_STATE_CALLBACK))
+    {
+      _rl_callback_data = _rl_callback_data_alloc (count);
+      _rl_callback_data->i1 = BFIND;
+      _rl_callback_data->i2 = FFIND;
+      _rl_callback_func = _rl_char_search_callback;
+      return (0);
+    }
+#endif
+
+  return (_rl_char_search (count, BFIND, FFIND));
+}
+
+/* **************************************************************** */
+/*								    */
+/*		   The Mark and the Region.			    */
+/*								    */
+/* **************************************************************** */
+
+/* Set the mark at POSITION. */
+int
+_rl_set_mark_at_pos (int position)
+{
+  if (position < 0 || position > rl_end)
+    return 1;
+
+  rl_mark = position;
+  return 0;
+}
+
+/* A bindable command to set the mark. */
+int
+rl_set_mark (int count, int key)
+{
+  return (_rl_set_mark_at_pos (rl_explicit_arg ? count : rl_point));
+}
+
+/* Exchange the position of mark and point. */
+int
+rl_exchange_point_and_mark (int count, int key)
+{
+  if (rl_mark > rl_end)
+    rl_mark = -1;
+
+  if (rl_mark < 0)
+    {
+      rl_ding ();
+      rl_mark = 0;		/* like _RL_FIX_POINT */
+      return 1;
+    }
+  else
+    {
+      SWAP (rl_point, rl_mark);
+      rl_activate_mark ();
+    }
+
+  return 0;
+}
+
+/* Active mark support */
+
+/* Is the region active? */
+static int mark_active = 0;
+
+/* Does the current command want the mark to remain active when it completes? */
+int _rl_keep_mark_active;
+
+void
+rl_keep_mark_active (void)
+{
+  _rl_keep_mark_active++;
+}
+
+void
+rl_activate_mark (void)
+{
+  mark_active = 1;
+  rl_keep_mark_active ();
+}
+
+void
+rl_deactivate_mark (void)
+{
+  mark_active = 0;
+}
+
+int
+rl_mark_active_p (void)
+{
+  return (mark_active);
+}
diff --git a/lib/readline/tilde.c b/lib/readline/tilde.c
new file mode 100644
index 0000000..d678a31
--- /dev/null
+++ b/lib/readline/tilde.c
@@ -0,0 +1,493 @@
+/* tilde.c -- Tilde expansion code (~/foo := $HOME/foo). */
+
+/* Copyright (C) 1988-2020 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#if defined (HAVE_STRING_H)
+#  include <string.h>
+#else /* !HAVE_STRING_H */
+#  include <strings.h>
+#endif /* !HAVE_STRING_H */  
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#include <sys/types.h>
+#if defined (HAVE_PWD_H)
+#include <pwd.h>
+#endif
+
+#include "tilde.h"
+
+#if defined (TEST) || defined (STATIC_MALLOC)
+static void *xmalloc (), *xrealloc ();
+#else
+#  include "xmalloc.h"
+#endif /* TEST || STATIC_MALLOC */
+
+#if !defined (HAVE_GETPW_DECLS)
+#  if defined (HAVE_GETPWUID)
+extern struct passwd *getpwuid (uid_t);
+#  endif
+#  if defined (HAVE_GETPWNAM)
+extern struct passwd *getpwnam (const char *);
+#  endif
+#endif /* !HAVE_GETPW_DECLS */
+
+#if !defined (savestring)
+#define savestring(x) strcpy ((char *)xmalloc (1 + strlen (x)), (x))
+#endif /* !savestring */
+
+#if !defined (NULL)
+#  if defined (__STDC__)
+#    define NULL ((void *) 0)
+#  else
+#    define NULL 0x0
+#  endif /* !__STDC__ */
+#endif /* !NULL */
+
+/* If being compiled as part of bash, these will be satisfied from
+   variables.o.  If being compiled as part of readline, they will
+   be satisfied from shell.o. */
+extern char *sh_get_home_dir (void);
+extern char *sh_get_env_value (const char *);
+
+/* The default value of tilde_additional_prefixes.  This is set to
+   whitespace preceding a tilde so that simple programs which do not
+   perform any word separation get desired behaviour. */
+static const char *default_prefixes[] =
+  { " ~", "\t~", (const char *)NULL };
+
+/* The default value of tilde_additional_suffixes.  This is set to
+   whitespace or newline so that simple programs which do not
+   perform any word separation get desired behaviour. */
+static const char *default_suffixes[] =
+  { " ", "\n", (const char *)NULL };
+
+/* If non-null, this contains the address of a function that the application
+   wants called before trying the standard tilde expansions.  The function
+   is called with the text sans tilde, and returns a malloc()'ed string
+   which is the expansion, or a NULL pointer if the expansion fails. */
+tilde_hook_func_t *tilde_expansion_preexpansion_hook = (tilde_hook_func_t *)NULL;
+
+/* If non-null, this contains the address of a function to call if the
+   standard meaning for expanding a tilde fails.  The function is called
+   with the text (sans tilde, as in "foo"), and returns a malloc()'ed string
+   which is the expansion, or a NULL pointer if there is no expansion. */
+tilde_hook_func_t *tilde_expansion_failure_hook = (tilde_hook_func_t *)NULL;
+
+/* When non-null, this is a NULL terminated array of strings which
+   are duplicates for a tilde prefix.  Bash uses this to expand
+   `=~' and `:~'. */
+char **tilde_additional_prefixes = (char **)default_prefixes;
+
+/* When non-null, this is a NULL terminated array of strings which match
+   the end of a username, instead of just "/".  Bash sets this to
+   `:' and `=~'. */
+char **tilde_additional_suffixes = (char **)default_suffixes;
+
+static int tilde_find_prefix (const char *, int *);
+static int tilde_find_suffix (const char *);
+static char *isolate_tilde_prefix (const char *, int *);
+static char *glue_prefix_and_suffix (char *, const char *, int);
+
+/* Find the start of a tilde expansion in STRING, and return the index of
+   the tilde which starts the expansion.  Place the length of the text
+   which identified this tilde starter in LEN, excluding the tilde itself. */
+static int
+tilde_find_prefix (const char *string, int *len)
+{
+  register int i, j, string_len;
+  register char **prefixes;
+
+  prefixes = tilde_additional_prefixes;
+
+  string_len = strlen (string);
+  *len = 0;
+
+  if (*string == '\0' || *string == '~')
+    return (0);
+
+  if (prefixes)
+    {
+      for (i = 0; i < string_len; i++)
+	{
+	  for (j = 0; prefixes[j]; j++)
+	    {
+	      if (strncmp (string + i, prefixes[j], strlen (prefixes[j])) == 0)
+		{
+		  *len = strlen (prefixes[j]) - 1;
+		  return (i + *len);
+		}
+	    }
+	}
+    }
+  return (string_len);
+}
+
+/* Find the end of a tilde expansion in STRING, and return the index of
+   the character which ends the tilde definition.  */
+static int
+tilde_find_suffix (const char *string)
+{
+  register int i, j, string_len;
+  register char **suffixes;
+
+  suffixes = tilde_additional_suffixes;
+  string_len = strlen (string);
+
+  for (i = 0; i < string_len; i++)
+    {
+#if defined (__MSDOS__)
+      if (string[i] == '/' || string[i] == '\\' /* || !string[i] */)
+#else
+      if (string[i] == '/' /* || !string[i] */)
+#endif
+	break;
+
+      for (j = 0; suffixes && suffixes[j]; j++)
+	{
+	  if (strncmp (string + i, suffixes[j], strlen (suffixes[j])) == 0)
+	    return (i);
+	}
+    }
+  return (i);
+}
+
+/* Return a new string which is the result of tilde expanding STRING. */
+char *
+tilde_expand (const char *string)
+{
+  char *result;
+  int result_size, result_index;
+
+  result_index = result_size = 0;
+  if (result = strchr (string, '~'))
+    result = (char *)xmalloc (result_size = (strlen (string) + 16));
+  else
+    result = (char *)xmalloc (result_size = (strlen (string) + 1));
+
+  /* Scan through STRING expanding tildes as we come to them. */
+  while (1)
+    {
+      register int start, end;
+      char *tilde_word, *expansion;
+      int len;
+
+      /* Make START point to the tilde which starts the expansion. */
+      start = tilde_find_prefix (string, &len);
+
+      /* Copy the skipped text into the result. */
+      if ((result_index + start + 1) > result_size)
+	result = (char *)xrealloc (result, 1 + (result_size += (start + 20)));
+
+      strncpy (result + result_index, string, start);
+      result_index += start;
+
+      /* Advance STRING to the starting tilde. */
+      string += start;
+
+      /* Make END be the index of one after the last character of the
+	 username. */
+      end = tilde_find_suffix (string);
+
+      /* If both START and END are zero, we are all done. */
+      if (!start && !end)
+	break;
+
+      /* Expand the entire tilde word, and copy it into RESULT. */
+      tilde_word = (char *)xmalloc (1 + end);
+      strncpy (tilde_word, string, end);
+      tilde_word[end] = '\0';
+      string += end;
+
+      expansion = tilde_expand_word (tilde_word);
+
+      if (expansion == 0)
+	expansion = tilde_word;
+      else
+	xfree (tilde_word);	
+
+      len = strlen (expansion);
+#ifdef __CYGWIN__
+      /* Fix for Cygwin to prevent ~user/xxx from expanding to //xxx when
+	 $HOME for `user' is /.  On cygwin, // denotes a network drive. */
+      if (len > 1 || *expansion != '/' || *string != '/')
+#endif
+	{
+	  if ((result_index + len + 1) > result_size)
+	    result = (char *)xrealloc (result, 1 + (result_size += (len + 20)));
+
+	  strcpy (result + result_index, expansion);
+	  result_index += len;
+	}
+      xfree (expansion);
+    }
+
+  result[result_index] = '\0';
+
+  return (result);
+}
+
+/* Take FNAME and return the tilde prefix we want expanded.  If LENP is
+   non-null, the index of the end of the prefix into FNAME is returned in
+   the location it points to. */
+static char *
+isolate_tilde_prefix (const char *fname, int *lenp)
+{
+  char *ret;
+  int i;
+
+  ret = (char *)xmalloc (strlen (fname));
+#if defined (__MSDOS__)
+  for (i = 1; fname[i] && fname[i] != '/' && fname[i] != '\\'; i++)
+#else
+  for (i = 1; fname[i] && fname[i] != '/'; i++)
+#endif
+    ret[i - 1] = fname[i];
+  ret[i - 1] = '\0';
+  if (lenp)
+    *lenp = i;
+  return ret;
+}
+
+#if 0
+/* Public function to scan a string (FNAME) beginning with a tilde and find
+   the portion of the string that should be passed to the tilde expansion
+   function.  Right now, it just calls tilde_find_suffix and allocates new
+   memory, but it can be expanded to do different things later. */
+char *
+tilde_find_word (const char *fname, int flags, int *lenp)
+{
+  int x;
+  char *r;
+
+  x = tilde_find_suffix (fname);
+  if (x == 0)
+    {
+      r = savestring (fname);
+      if (lenp)
+	*lenp = 0;
+    }
+  else
+    {
+      r = (char *)xmalloc (1 + x);
+      strncpy (r, fname, x);
+      r[x] = '\0';
+      if (lenp)
+	*lenp = x;
+    }
+
+  return r;
+}
+#endif
+
+/* Return a string that is PREFIX concatenated with SUFFIX starting at
+   SUFFIND. */
+static char *
+glue_prefix_and_suffix (char *prefix, const char *suffix, int suffind)
+{
+  char *ret;
+  int plen, slen;
+
+  plen = (prefix && *prefix) ? strlen (prefix) : 0;
+  slen = strlen (suffix + suffind);
+  ret = (char *)xmalloc (plen + slen + 1);
+  if (plen)
+    strcpy (ret, prefix);
+  strcpy (ret + plen, suffix + suffind);
+  return ret;
+}
+
+/* Do the work of tilde expansion on FILENAME.  FILENAME starts with a
+   tilde.  If there is no expansion, call tilde_expansion_failure_hook.
+   This always returns a newly-allocated string, never static storage. */
+char *
+tilde_expand_word (const char *filename)
+{
+  char *dirname, *expansion, *username;
+  int user_len;
+  struct passwd *user_entry;
+
+  if (filename == 0)
+    return ((char *)NULL);
+
+  if (*filename != '~')
+    return (savestring (filename));
+
+  /* A leading `~/' or a bare `~' is *always* translated to the value of
+     $HOME or the home directory of the current user, regardless of any
+     preexpansion hook. */
+  if (filename[1] == '\0' || filename[1] == '/')
+    {
+      /* Prefix $HOME to the rest of the string. */
+      expansion = sh_get_env_value ("HOME");
+#if defined (_WIN32)
+      if (expansion == 0)
+	expansion = sh_get_env_value ("APPDATA");
+#endif
+
+      /* If there is no HOME variable, look up the directory in
+	 the password database. */
+      if (expansion == 0)
+	expansion = sh_get_home_dir ();
+
+      return (glue_prefix_and_suffix (expansion, filename, 1));
+    }
+
+  username = isolate_tilde_prefix (filename, &user_len);
+
+  if (tilde_expansion_preexpansion_hook)
+    {
+      expansion = (*tilde_expansion_preexpansion_hook) (username);
+      if (expansion)
+	{
+	  dirname = glue_prefix_and_suffix (expansion, filename, user_len);
+	  xfree (username);
+	  xfree (expansion);
+	  return (dirname);
+	}
+    }
+
+  /* No preexpansion hook, or the preexpansion hook failed.  Look in the
+     password database. */
+  dirname = (char *)NULL;
+#if defined (HAVE_GETPWNAM)
+  user_entry = getpwnam (username);
+#else
+  user_entry = 0;
+#endif
+  if (user_entry == 0)
+    {
+      /* If the calling program has a special syntax for expanding tildes,
+	 and we couldn't find a standard expansion, then let them try. */
+      if (tilde_expansion_failure_hook)
+	{
+	  expansion = (*tilde_expansion_failure_hook) (username);
+	  if (expansion)
+	    {
+	      dirname = glue_prefix_and_suffix (expansion, filename, user_len);
+	      xfree (expansion);
+	    }
+	}
+      /* If we don't have a failure hook, or if the failure hook did not
+	 expand the tilde, return a copy of what we were passed. */
+      if (dirname == 0)
+	dirname = savestring (filename);
+    }
+#if defined (HAVE_GETPWENT)
+  else
+    dirname = glue_prefix_and_suffix (user_entry->pw_dir, filename, user_len);
+#endif
+
+  xfree (username);
+#if defined (HAVE_GETPWENT)
+  endpwent ();
+#endif
+  return (dirname);
+}
+
+
+#if defined (TEST)
+#undef NULL
+#include <stdio.h>
+
+main (int argc, char **argv)
+{
+  char *result, line[512];
+  int done = 0;
+
+  while (!done)
+    {
+      printf ("~expand: ");
+      fflush (stdout);
+
+      if (!gets (line))
+	strcpy (line, "done");
+
+      if ((strcmp (line, "done") == 0) ||
+	  (strcmp (line, "quit") == 0) ||
+	  (strcmp (line, "exit") == 0))
+	{
+	  done = 1;
+	  break;
+	}
+
+      result = tilde_expand (line);
+      printf ("  --> %s\n", result);
+      free (result);
+    }
+  exit (0);
+}
+
+static void memory_error_and_abort (void);
+
+static void *
+xmalloc (size_t bytes)
+{
+  void *temp = (char *)malloc (bytes);
+
+  if (!temp)
+    memory_error_and_abort ();
+  return (temp);
+}
+
+static void *
+xrealloc (void *pointer, int bytes)
+{
+  void *temp;
+
+  if (!pointer)
+    temp = malloc (bytes);
+  else
+    temp = realloc (pointer, bytes);
+
+  if (!temp)
+    memory_error_and_abort ();
+
+  return (temp);
+}
+
+static void
+memory_error_and_abort (void)
+{
+  fprintf (stderr, "readline: out of virtual memory\n");
+  abort ();
+}
+
+/*
+ * Local variables:
+ * compile-command: "gcc -g -DTEST -o tilde tilde.c"
+ * end:
+ */
+#endif /* TEST */
diff --git a/lib/readline/tilde.h b/lib/readline/tilde.h
new file mode 100644
index 0000000..e26dd04
--- /dev/null
+++ b/lib/readline/tilde.h
@@ -0,0 +1,80 @@
+/* tilde.h: Externally available variables and function in libtilde.a. */
+
+/* Copyright (C) 1992-2009 Free Software Foundation, Inc.
+
+   This file contains the Readline Library (Readline), a set of
+   routines for providing Emacs style line input to programs that ask
+   for it.
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_TILDE_H_)
+#  define _TILDE_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* A function can be defined using prototypes and compile on both ANSI C
+   and traditional C compilers with something like this:
+	extern char *func PARAMS((char *, char *, int)); */
+
+#if !defined (PARAMS)
+#  if defined (__STDC__) || defined (__GNUC__) || defined (__cplusplus)
+#    define PARAMS(protos) protos
+#  else
+#    define PARAMS(protos) ()
+#  endif
+#endif
+
+typedef char *tilde_hook_func_t PARAMS((char *));
+
+/* If non-null, this contains the address of a function that the application
+   wants called before trying the standard tilde expansions.  The function
+   is called with the text sans tilde, and returns a malloc()'ed string
+   which is the expansion, or a NULL pointer if the expansion fails. */
+extern tilde_hook_func_t *tilde_expansion_preexpansion_hook;
+
+/* If non-null, this contains the address of a function to call if the
+   standard meaning for expanding a tilde fails.  The function is called
+   with the text (sans tilde, as in "foo"), and returns a malloc()'ed string
+   which is the expansion, or a NULL pointer if there is no expansion. */
+extern tilde_hook_func_t *tilde_expansion_failure_hook;
+
+/* When non-null, this is a NULL terminated array of strings which
+   are duplicates for a tilde prefix.  Bash uses this to expand
+   `=~' and `:~'. */
+extern char **tilde_additional_prefixes;
+
+/* When non-null, this is a NULL terminated array of strings which match
+   the end of a username, instead of just "/".  Bash sets this to
+   `:' and `=~'. */
+extern char **tilde_additional_suffixes;
+
+/* Return a new string which is the result of tilde expanding STRING. */
+extern char *tilde_expand PARAMS((const char *));
+
+/* Do the work of tilde expansion on FILENAME.  FILENAME starts with a
+   tilde.  If there is no expansion, call tilde_expansion_failure_hook. */
+extern char *tilde_expand_word PARAMS((const char *));
+
+/* Find the portion of the string beginning with ~ that should be expanded. */
+extern char *tilde_find_word PARAMS((const char *, int, int *));
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _TILDE_H_ */
diff --git a/lib/readline/undo.c b/lib/readline/undo.c
new file mode 100644
index 0000000..1479991
--- /dev/null
+++ b/lib/readline/undo.c
@@ -0,0 +1,367 @@
+/* undo.c - manage list of changes to lines, offering opportunity to undo them */
+
+/* Copyright (C) 1987-2017 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <sys/types.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>           /* for _POSIX_VERSION */
+#endif /* HAVE_UNISTD_H */
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#include <stdio.h>
+
+/* System-specific feature definitions and include files. */
+#include "rldefs.h"
+
+/* Some standard library routines. */
+#include "readline.h"
+#include "history.h"
+
+#include "rlprivate.h"
+#include "xmalloc.h"
+
+extern void _hs_replace_history_data PARAMS((int, histdata_t *, histdata_t *));
+
+extern HIST_ENTRY *_rl_saved_line_for_history;
+
+/* Non-zero tells rl_delete_text and rl_insert_text to not add to
+   the undo list. */
+int _rl_doing_an_undo = 0;
+
+/* How many unclosed undo groups we currently have. */
+int _rl_undo_group_level = 0;
+
+/* The current undo list for THE_LINE. */
+UNDO_LIST *rl_undo_list = (UNDO_LIST *)NULL;
+
+/* **************************************************************** */
+/*								    */
+/*			Undo, and Undoing			    */
+/*								    */
+/* **************************************************************** */
+
+static UNDO_LIST *
+alloc_undo_entry (enum undo_code what, int start, int end, char *text)
+{
+  UNDO_LIST *temp;
+
+  temp = (UNDO_LIST *)xmalloc (sizeof (UNDO_LIST));
+  temp->what = what;
+  temp->start = start;
+  temp->end = end;
+  temp->text = text;
+
+  temp->next = (UNDO_LIST *)NULL;
+  return temp;
+}
+
+/* Remember how to undo something.  Concatenate some undos if that
+   seems right. */
+void
+rl_add_undo (enum undo_code what, int start, int end, char *text)
+{
+  UNDO_LIST *temp;
+
+  temp = alloc_undo_entry (what, start, end, text);
+  temp->next = rl_undo_list;
+  rl_undo_list = temp;
+}
+
+/* Free an UNDO_LIST */
+void
+_rl_free_undo_list (UNDO_LIST *ul)
+{
+  UNDO_LIST *release;
+
+  while (ul)
+    {
+      release = ul;
+      ul = ul->next;
+
+      if (release->what == UNDO_DELETE)
+	xfree (release->text);
+
+      xfree (release);
+    }
+}
+
+/* Free the existing undo list. */
+void
+rl_free_undo_list (void)
+{
+  UNDO_LIST *release, *orig_list;
+
+  orig_list = rl_undo_list;
+  _rl_free_undo_list (rl_undo_list);
+  rl_undo_list = (UNDO_LIST *)NULL;
+  _hs_replace_history_data (-1, (histdata_t *)orig_list, (histdata_t *)NULL);
+}
+
+UNDO_LIST *
+_rl_copy_undo_entry (UNDO_LIST *entry)
+{
+  UNDO_LIST *new;
+
+  new = alloc_undo_entry (entry->what, entry->start, entry->end, (char *)NULL);
+  new->text = entry->text ? savestring (entry->text) : 0;
+  return new;
+}
+
+UNDO_LIST *
+_rl_copy_undo_list (UNDO_LIST *head)
+{
+  UNDO_LIST *list, *new, *roving, *c;
+
+  if (head == 0)
+    return head;
+
+  list = head;
+  new = 0;
+  while (list)
+    {
+      c = _rl_copy_undo_entry (list);
+      if (new == 0)
+	roving = new = c;
+      else
+	{
+	  roving->next = c;
+	  roving = roving->next;
+	}
+      list = list->next;
+    }
+
+  roving->next = 0;
+  return new;
+}
+
+/* Undo the next thing in the list.  Return 0 if there
+   is nothing to undo, or non-zero if there was. */
+int
+rl_do_undo (void)
+{
+  UNDO_LIST *release, *search;
+  int waiting_for_begin, start, end;
+  HIST_ENTRY *cur, *temp;
+
+#define TRANS(i) ((i) == -1 ? rl_point : ((i) == -2 ? rl_end : (i)))
+
+  start = end = waiting_for_begin = 0;
+  do
+    {
+      if (rl_undo_list == 0)
+	return (0);
+
+      _rl_doing_an_undo = 1;
+      RL_SETSTATE(RL_STATE_UNDOING);
+
+      /* To better support vi-mode, a start or end value of -1 means
+	 rl_point, and a value of -2 means rl_end. */
+      if (rl_undo_list->what == UNDO_DELETE || rl_undo_list->what == UNDO_INSERT)
+	{
+	  start = TRANS (rl_undo_list->start);
+	  end = TRANS (rl_undo_list->end);
+	}
+
+      switch (rl_undo_list->what)
+	{
+	/* Undoing deletes means inserting some text. */
+	case UNDO_DELETE:
+	  rl_point = start;
+	  _rl_fix_point (1);
+	  rl_insert_text (rl_undo_list->text);
+	  xfree (rl_undo_list->text);
+	  break;
+
+	/* Undoing inserts means deleting some text. */
+	case UNDO_INSERT:
+	  rl_delete_text (start, end);
+	  rl_point = start;
+	  _rl_fix_point (1);
+	  break;
+
+	/* Undoing an END means undoing everything 'til we get to a BEGIN. */
+	case UNDO_END:
+	  waiting_for_begin++;
+	  break;
+
+	/* Undoing a BEGIN means that we are done with this group. */
+	case UNDO_BEGIN:
+	  if (waiting_for_begin)
+	    waiting_for_begin--;
+	  else
+	    rl_ding ();
+	  break;
+	}
+
+      _rl_doing_an_undo = 0;
+      RL_UNSETSTATE(RL_STATE_UNDOING);
+
+      release = rl_undo_list;
+      rl_undo_list = rl_undo_list->next;
+      release->next = 0;	/* XXX */
+
+      /* If we are editing a history entry, make sure the change is replicated
+	 in the history entry's line */
+      cur = current_history ();
+      if (cur && cur->data && (UNDO_LIST *)cur->data == release)
+	{
+	  temp = replace_history_entry (where_history (), rl_line_buffer, (histdata_t)rl_undo_list);
+	  xfree (temp->line);
+	  FREE (temp->timestamp);
+	  xfree (temp);
+	}
+
+      /* Make sure there aren't any history entries with that undo list */
+      _hs_replace_history_data (-1, (histdata_t *)release, (histdata_t *)rl_undo_list);
+
+      /* And make sure this list isn't anywhere in the saved line for history */
+      if (_rl_saved_line_for_history && _rl_saved_line_for_history->data)
+	{
+	  /* Brute force; no finesse here */
+	  search = (UNDO_LIST *)_rl_saved_line_for_history->data;
+	  if (search == release)
+	    _rl_saved_line_for_history->data = rl_undo_list;
+	  else
+	    {
+	      while (search->next)
+		{
+		  if (search->next == release)
+		    {
+		      search->next = rl_undo_list;
+		      break;
+		    }
+		  search = search->next;
+		}
+	    }
+	}
+
+      xfree (release);
+    }
+  while (waiting_for_begin);
+
+  return (1);
+}
+#undef TRANS
+
+int
+_rl_fix_last_undo_of_type (int type, int start, int end)
+{
+  UNDO_LIST *rl;
+
+  for (rl = rl_undo_list; rl; rl = rl->next)
+    {
+      if (rl->what == type)
+	{
+	  rl->start = start;
+	  rl->end = end;
+	  return 0;
+	}
+    }
+  return 1;
+}
+
+/* Begin a group.  Subsequent undos are undone as an atomic operation. */
+int
+rl_begin_undo_group (void)
+{
+  rl_add_undo (UNDO_BEGIN, 0, 0, 0);
+  _rl_undo_group_level++;
+  return 0;
+}
+
+/* End an undo group started with rl_begin_undo_group (). */
+int
+rl_end_undo_group (void)
+{
+  rl_add_undo (UNDO_END, 0, 0, 0);
+  _rl_undo_group_level--;
+  return 0;
+}
+
+/* Save an undo entry for the text from START to END. */
+int
+rl_modifying (int start, int end)
+{
+  if (start > end)
+    {
+      SWAP (start, end);
+    }
+
+  if (start != end)
+    {
+      char *temp = rl_copy_text (start, end);
+      rl_begin_undo_group ();
+      rl_add_undo (UNDO_DELETE, start, end, temp);
+      rl_add_undo (UNDO_INSERT, start, end, (char *)NULL);
+      rl_end_undo_group ();
+    }
+  return 0;
+}
+
+/* Revert the current line to its previous state. */
+int
+rl_revert_line (int count, int key)
+{
+  if (rl_undo_list == 0)
+    rl_ding ();
+  else
+    {
+      while (rl_undo_list)
+	rl_do_undo ();
+#if defined (VI_MODE)
+      if (rl_editing_mode == vi_mode)
+	rl_point = rl_mark = 0;		/* rl_end should be set correctly */
+#endif
+    }
+    
+  return 0;
+}
+
+/* Do some undoing of things that were done. */
+int
+rl_undo_command (int count, int key)
+{
+  if (count < 0)
+    return 0;	/* Nothing to do. */
+
+  while (count)
+    {
+      if (rl_do_undo ())
+	count--;
+      else
+	{
+	  rl_ding ();
+	  break;
+	}
+    }
+  return 0;
+}
diff --git a/lib/readline/util.c b/lib/readline/util.c
new file mode 100644
index 0000000..1576b55
--- /dev/null
+++ b/lib/readline/util.c
@@ -0,0 +1,576 @@
+/* util.c -- readline utility functions */
+
+/* Copyright (C) 1987-2017 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <sys/types.h>
+#include <fcntl.h>
+#include "posixjmp.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>           /* for _POSIX_VERSION */
+#endif /* HAVE_UNISTD_H */
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#include <stdio.h>
+#include <ctype.h>
+
+/* System-specific feature definitions and include files. */
+#include "rldefs.h"
+#include "rlmbutil.h"
+
+#if defined (TIOCSTAT_IN_SYS_IOCTL)
+#  include <sys/ioctl.h>
+#endif /* TIOCSTAT_IN_SYS_IOCTL */
+
+/* Some standard library routines. */
+#include "readline.h"
+
+#include "rlprivate.h"
+#include "xmalloc.h"
+#include "rlshell.h"
+
+/* **************************************************************** */
+/*								    */
+/*			Utility Functions			    */
+/*								    */
+/* **************************************************************** */
+
+/* Return 0 if C is not a member of the class of characters that belong
+   in words, or 1 if it is. */
+
+int _rl_allow_pathname_alphabetic_chars = 0;
+static const char * const pathname_alphabetic_chars = "/-_=~.#$";
+
+int
+rl_alphabetic (int c)
+{
+  if (ALPHABETIC (c))
+    return (1);
+
+  return (_rl_allow_pathname_alphabetic_chars &&
+	    strchr (pathname_alphabetic_chars, c) != NULL);
+}
+
+#if defined (HANDLE_MULTIBYTE)
+int
+_rl_walphabetic (wchar_t wc)
+{
+  int c;
+
+  if (iswalnum (wc))
+    return (1);     
+
+  c = wc & 0177;
+  return (_rl_allow_pathname_alphabetic_chars &&
+	    strchr (pathname_alphabetic_chars, c) != NULL);
+}
+#endif
+
+/* How to abort things. */
+int
+_rl_abort_internal (void)
+{
+  rl_ding ();
+  rl_clear_message ();
+  _rl_reset_argument ();
+  rl_clear_pending_input ();
+  rl_deactivate_mark ();
+
+  while (rl_executing_macro)
+    _rl_pop_executing_macro ();
+  _rl_kill_kbd_macro ();
+
+  RL_UNSETSTATE (RL_STATE_MULTIKEY);	/* XXX */
+
+  rl_last_func = (rl_command_func_t *)NULL;
+
+  _rl_longjmp (_rl_top_level, 1);
+  return (0);
+}
+
+int
+rl_abort (int count, int key)
+{
+  return (_rl_abort_internal ());
+}
+
+int
+_rl_null_function (int count, int key)
+{
+  return 0;
+}
+
+int
+rl_tty_status (int count, int key)
+{
+#if defined (TIOCSTAT)
+  ioctl (1, TIOCSTAT, (char *)0);
+  rl_refresh_line (count, key);
+#else
+  rl_ding ();
+#endif
+  return 0;
+}
+
+/* Return a copy of the string between FROM and TO.
+   FROM is inclusive, TO is not. */
+char *
+rl_copy_text (int from, int to)
+{
+  register int length;
+  char *copy;
+
+  /* Fix it if the caller is confused. */
+  if (from > to)
+    SWAP (from, to);
+
+  length = to - from;
+  copy = (char *)xmalloc (1 + length);
+  strncpy (copy, rl_line_buffer + from, length);
+  copy[length] = '\0';
+  return (copy);
+}
+
+/* Increase the size of RL_LINE_BUFFER until it has enough space to hold
+   LEN characters. */
+void
+rl_extend_line_buffer (int len)
+{
+  while (len >= rl_line_buffer_len)
+    {
+      rl_line_buffer_len += DEFAULT_BUFFER_SIZE;
+      rl_line_buffer = (char *)xrealloc (rl_line_buffer, rl_line_buffer_len);
+    }
+
+  _rl_set_the_line ();
+}
+
+
+/* A function for simple tilde expansion. */
+int
+rl_tilde_expand (int ignore, int key)
+{
+  register int start, end;
+  char *homedir, *temp;
+  int len;
+
+  end = rl_point;
+  start = end - 1;
+
+  if (rl_point == rl_end && rl_line_buffer[rl_point] == '~')
+    {
+      homedir = tilde_expand ("~");
+      _rl_replace_text (homedir, start, end);
+      xfree (homedir);
+      return (0);
+    }
+  else if (start >= 0 && rl_line_buffer[start] != '~')
+    {
+      for (; start >= 0 && !whitespace (rl_line_buffer[start]); start--)
+        ;
+      start++;
+    }
+  else if (start < 0)
+    start = 0;
+
+  end = start;
+  do
+    end++;
+  while (whitespace (rl_line_buffer[end]) == 0 && end < rl_end);
+
+  if (whitespace (rl_line_buffer[end]) || end >= rl_end)
+    end--;
+
+  /* If the first character of the current word is a tilde, perform
+     tilde expansion and insert the result.  If not a tilde, do
+     nothing. */
+  if (rl_line_buffer[start] == '~')
+    {
+      len = end - start + 1;
+      temp = (char *)xmalloc (len + 1);
+      strncpy (temp, rl_line_buffer + start, len);
+      temp[len] = '\0';
+      homedir = tilde_expand (temp);
+      xfree (temp);
+
+      _rl_replace_text (homedir, start, end);
+      xfree (homedir);
+    }
+
+  return (0);
+}
+
+#if defined (USE_VARARGS)
+void
+#if defined (PREFER_STDARG)
+_rl_ttymsg (const char *format, ...)
+#else
+_rl_ttymsg (va_alist)
+     va_dcl
+#endif
+{
+  va_list args;
+#if defined (PREFER_VARARGS)
+  char *format;
+#endif
+
+#if defined (PREFER_STDARG)
+  va_start (args, format);
+#else
+  va_start (args);
+  format = va_arg (args, char *);
+#endif
+
+  fprintf (stderr, "readline: ");
+  vfprintf (stderr, format, args);
+  fprintf (stderr, "\n");
+  fflush (stderr);
+
+  va_end (args);
+
+  rl_forced_update_display ();
+}
+
+void
+#if defined (PREFER_STDARG)
+_rl_errmsg (const char *format, ...)
+#else
+_rl_errmsg (va_alist)
+     va_dcl
+#endif
+{
+  va_list args;
+#if defined (PREFER_VARARGS)
+  char *format;
+#endif
+
+#if defined (PREFER_STDARG)
+  va_start (args, format);
+#else
+  va_start (args);
+  format = va_arg (args, char *);
+#endif
+
+  fprintf (stderr, "readline: ");
+  vfprintf (stderr, format, args);
+  fprintf (stderr, "\n");
+  fflush (stderr);
+
+  va_end (args);
+}
+
+#else /* !USE_VARARGS */
+void
+_rl_ttymsg (format, arg1, arg2)
+     char *format;
+{
+  fprintf (stderr, "readline: ");
+  fprintf (stderr, format, arg1, arg2);
+  fprintf (stderr, "\n");
+
+  rl_forced_update_display ();
+}
+
+void
+_rl_errmsg (format, arg1, arg2)
+     char *format;
+{
+  fprintf (stderr, "readline: ");
+  fprintf (stderr, format, arg1, arg2);
+  fprintf (stderr, "\n");
+}
+#endif /* !USE_VARARGS */
+
+/* **************************************************************** */
+/*								    */
+/*			String Utility Functions		    */
+/*								    */
+/* **************************************************************** */
+
+/* Determine if s2 occurs in s1.  If so, return a pointer to the
+   match in s1.  The compare is case insensitive. */
+char *
+_rl_strindex (const char *s1, const char *s2)
+{
+  register int i, l, len;
+
+  for (i = 0, l = strlen (s2), len = strlen (s1); (len - i) >= l; i++)
+    if (_rl_strnicmp (s1 + i, s2, l) == 0)
+      return ((char *) (s1 + i));
+  return ((char *)NULL);
+}
+
+#ifndef HAVE_STRPBRK
+/* Find the first occurrence in STRING1 of any character from STRING2.
+   Return a pointer to the character in STRING1. */
+char *
+_rl_strpbrk (const char *string1, const char *string2)
+{
+  register const char *scan;
+#if defined (HANDLE_MULTIBYTE)
+  mbstate_t ps;
+  register int i, v;
+
+  memset (&ps, 0, sizeof (mbstate_t));
+#endif
+
+  for (; *string1; string1++)
+    {
+      for (scan = string2; *scan; scan++)
+	{
+	  if (*string1 == *scan)
+	    return ((char *)string1);
+	}
+#if defined (HANDLE_MULTIBYTE)
+      if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+	{
+	  v = _rl_get_char_len (string1, &ps);
+	  if (v > 1)
+	    string1 += v - 1;	/* -1 to account for auto-increment in loop */
+	}
+#endif
+    }
+  return ((char *)NULL);
+}
+#endif
+
+#if !defined (HAVE_STRCASECMP)
+/* Compare at most COUNT characters from string1 to string2.  Case
+   doesn't matter (strncasecmp). */
+int
+_rl_strnicmp (const char *string1, const char *string2, int count)
+{
+  register const char *s1;
+  register const char *s2;
+  register int d;
+
+  if (count <= 0 || (string1 == string2))
+    return 0;
+
+  s1 = string1;
+  s2 = string2;
+  do
+    {
+      d = _rl_to_lower (*s1) - _rl_to_lower (*s2);	/* XXX - cast to unsigned char? */
+      if (d != 0)
+	return d;
+      if (*s1++ == '\0')
+        break;
+      s2++;
+    }
+  while (--count != 0);
+
+  return (0);
+}
+
+/* strcmp (), but caseless (strcasecmp). */
+int
+_rl_stricmp (const char *string1, const char *string2)
+{
+  register const char *s1;
+  register const char *s2;
+  register int d;
+
+  s1 = string1;
+  s2 = string2;
+
+  if (s1 == s2)
+    return 0;
+
+  while ((d = _rl_to_lower (*s1) - _rl_to_lower (*s2)) == 0)
+    {
+      if (*s1++ == '\0')
+        return 0;
+      s2++;
+    }
+
+  return (d);
+}
+#endif /* !HAVE_STRCASECMP */
+
+/* Stupid comparison routine for qsort () ing strings. */
+int
+_rl_qsort_string_compare (char **s1, char **s2)
+{
+#if defined (HAVE_STRCOLL)
+  return (strcoll (*s1, *s2));
+#else
+  int result;
+
+  result = **s1 - **s2;
+  if (result == 0)
+    result = strcmp (*s1, *s2);
+
+  return result;
+#endif
+}
+
+/* Function equivalents for the macros defined in chardefs.h. */
+#define FUNCTION_FOR_MACRO(f)	int (f) (int c) { return f (c); }
+
+FUNCTION_FOR_MACRO (_rl_digit_p)
+FUNCTION_FOR_MACRO (_rl_digit_value)
+FUNCTION_FOR_MACRO (_rl_lowercase_p)
+FUNCTION_FOR_MACRO (_rl_pure_alphabetic)
+FUNCTION_FOR_MACRO (_rl_to_lower)
+FUNCTION_FOR_MACRO (_rl_to_upper)
+FUNCTION_FOR_MACRO (_rl_uppercase_p)
+
+/* A convenience function, to force memory deallocation to be performed
+   by readline.  DLLs on Windows apparently require this. */
+void
+rl_free (void *mem)
+{
+  if (mem)
+    free (mem);
+}
+
+/* Backwards compatibility, now that savestring has been removed from
+   all `public' readline header files. */
+#undef _rl_savestring
+char *
+_rl_savestring (const char *s)
+{
+  return (strcpy ((char *)xmalloc (1 + (int)strlen (s)), (s)));
+}
+
+#if defined (DEBUG)
+#if defined (USE_VARARGS)
+static FILE *_rl_tracefp;
+
+void
+#if defined (PREFER_STDARG)
+_rl_trace (const char *format, ...)
+#else
+_rl_trace (va_alist)
+     va_dcl
+#endif
+{
+  va_list args;
+#if defined (PREFER_VARARGS)
+  char *format;
+#endif
+
+#if defined (PREFER_STDARG)
+  va_start (args, format);
+#else
+  va_start (args);
+  format = va_arg (args, char *);
+#endif
+
+  if (_rl_tracefp == 0)
+    _rl_tropen ();
+  vfprintf (_rl_tracefp, format, args);
+  fprintf (_rl_tracefp, "\n");
+  fflush (_rl_tracefp);
+
+  va_end (args);
+}
+
+int
+_rl_tropen (void)
+{
+  char fnbuf[128], *x;
+
+  if (_rl_tracefp)
+    fclose (_rl_tracefp);
+#if defined (_WIN32) && !defined (__CYGWIN__)
+  x = sh_get_env_value ("TEMP");
+  if (x == 0)
+    x = ".";
+#else
+  x = "/var/tmp";
+#endif
+  snprintf (fnbuf, sizeof (fnbuf), "%s/rltrace.%ld", x, (long)getpid());
+  unlink(fnbuf);
+  _rl_tracefp = fopen (fnbuf, "w+");
+  return _rl_tracefp != 0;
+}
+
+int
+_rl_trclose (void)
+{
+  int r;
+
+  r = fclose (_rl_tracefp);
+  _rl_tracefp = 0;
+  return r;
+}
+
+void
+_rl_settracefp (FILE *fp)
+{
+  _rl_tracefp = fp;
+}
+#endif
+#endif /* DEBUG */
+
+
+#if HAVE_DECL_AUDIT_USER_TTY && defined (HAVE_LIBAUDIT_H) && defined (ENABLE_TTY_AUDIT_SUPPORT)
+#include <sys/socket.h>
+#include <libaudit.h>
+#include <linux/audit.h>
+#include <linux/netlink.h>
+
+/* Report STRING to the audit system. */
+void
+_rl_audit_tty (char *string)
+{
+  struct audit_message req;
+  struct sockaddr_nl addr;
+  size_t size;
+  int fd;
+
+  fd = socket (PF_NETLINK, SOCK_RAW, NETLINK_AUDIT);
+  if (fd < 0)
+    return;
+  size = strlen (string) + 1;
+
+  if (NLMSG_SPACE (size) > MAX_AUDIT_MESSAGE_LENGTH)
+    return;
+
+  memset (&req, 0, sizeof(req));
+  req.nlh.nlmsg_len = NLMSG_SPACE (size);
+  req.nlh.nlmsg_type = AUDIT_USER_TTY;
+  req.nlh.nlmsg_flags = NLM_F_REQUEST;
+  req.nlh.nlmsg_seq = 0;
+  if (size && string)
+    memcpy (NLMSG_DATA(&req.nlh), string, size);
+  memset (&addr, 0, sizeof(addr));
+
+  addr.nl_family = AF_NETLINK;
+  addr.nl_pid = 0;
+  addr.nl_groups = 0;
+
+  sendto (fd, &req, req.nlh.nlmsg_len, 0, (struct sockaddr*)&addr, sizeof(addr));
+  close (fd);
+}
+#endif
diff --git a/lib/readline/vi_keymap.c b/lib/readline/vi_keymap.c
new file mode 100644
index 0000000..045258b
--- /dev/null
+++ b/lib/readline/vi_keymap.c
@@ -0,0 +1,875 @@
+/* vi_keymap.c -- the keymap for vi_mode in readline (). */
+
+/* Copyright (C) 1987-2017 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (BUFSIZ)
+#include <stdio.h>
+#endif /* !BUFSIZ */
+
+#include "readline.h"
+
+#if 0
+extern KEYMAP_ENTRY_ARRAY vi_escape_keymap;
+#endif
+
+/* The keymap arrays for handling vi mode. */
+KEYMAP_ENTRY_ARRAY vi_movement_keymap = {
+  /* The regular control keys come first. */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-@ */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-a */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-b */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-c */
+  { ISFUNC, rl_vi_eof_maybe },			/* Control-d */
+  { ISFUNC, rl_emacs_editing_mode },		/* Control-e */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-f */
+  { ISFUNC, rl_abort },				/* Control-g */
+  { ISFUNC, rl_backward_char },			/* Control-h */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-i */
+  { ISFUNC, rl_newline },			/* Control-j */
+  { ISFUNC, rl_kill_line },			/* Control-k */
+  { ISFUNC, rl_clear_screen },			/* Control-l */
+  { ISFUNC, rl_newline },			/* Control-m */
+  { ISFUNC, rl_get_next_history },		/* Control-n */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-o */
+  { ISFUNC, rl_get_previous_history },		/* Control-p */
+  { ISFUNC, rl_quoted_insert },			/* Control-q */
+  { ISFUNC, rl_reverse_search_history },	/* Control-r */
+  { ISFUNC, rl_forward_search_history },	/* Control-s */
+  { ISFUNC, rl_transpose_chars },		/* Control-t */
+  { ISFUNC, rl_unix_line_discard },		/* Control-u */
+  { ISFUNC, rl_quoted_insert },			/* Control-v */
+  { ISFUNC, rl_vi_unix_word_rubout },		/* Control-w */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-x */
+  { ISFUNC, rl_yank },				/* Control-y */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-z */
+
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-[ */	/* vi_escape_keymap */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-\ */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-] */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-^ */
+  { ISFUNC, rl_vi_undo },			/* Control-_ */
+
+  /* The start of printing characters. */
+  { ISFUNC, rl_forward_char },			/* SPACE */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* ! */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* " */
+  { ISFUNC, rl_insert_comment },		/* # */
+  { ISFUNC, rl_end_of_line },			/* $ */
+  { ISFUNC, rl_vi_match },			/* % */
+  { ISFUNC, rl_vi_tilde_expand },		/* & */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* ' */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* ( */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* ) */
+  { ISFUNC, rl_vi_complete },			/* * */
+  { ISFUNC, rl_get_next_history},		/* + */
+  { ISFUNC, rl_vi_char_search },		/* , */
+  { ISFUNC, rl_get_previous_history },		/* - */
+  { ISFUNC, rl_vi_redo },			/* . */
+  { ISFUNC, rl_vi_search },			/* / */
+
+  /* Regular digits. */
+  { ISFUNC, rl_beg_of_line },			/* 0 */
+  { ISFUNC, rl_vi_arg_digit },			/* 1 */
+  { ISFUNC, rl_vi_arg_digit },			/* 2 */
+  { ISFUNC, rl_vi_arg_digit },			/* 3 */
+  { ISFUNC, rl_vi_arg_digit },			/* 4 */
+  { ISFUNC, rl_vi_arg_digit },			/* 5 */
+  { ISFUNC, rl_vi_arg_digit },			/* 6 */
+  { ISFUNC, rl_vi_arg_digit },			/* 7 */
+  { ISFUNC, rl_vi_arg_digit },			/* 8 */
+  { ISFUNC, rl_vi_arg_digit },			/* 9 */
+
+  /* A little more punctuation. */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* : */
+  { ISFUNC, rl_vi_char_search },		/* ; */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* < */
+  { ISFUNC, rl_vi_complete },			/* = */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* > */
+  { ISFUNC, rl_vi_search },			/* ? */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* @ */
+
+  /* Uppercase alphabet. */
+  { ISFUNC, rl_vi_append_eol },			/* A */
+  { ISFUNC, rl_vi_prev_word},			/* B */
+  { ISFUNC, rl_vi_change_to },			/* C */
+  { ISFUNC, rl_vi_delete_to },			/* D */
+  { ISFUNC, rl_vi_end_word },			/* E */
+  { ISFUNC, rl_vi_char_search },		/* F */
+  { ISFUNC, rl_vi_fetch_history },		/* G */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* H */
+  { ISFUNC, rl_vi_insert_beg },			/* I */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* J */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* K */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* L */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* M */
+  { ISFUNC, rl_vi_search_again },		/* N */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* O */
+  { ISFUNC, rl_vi_put },			/* P */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Q */
+  { ISFUNC, rl_vi_replace },			/* R */
+  { ISFUNC, rl_vi_subst },			/* S */
+  { ISFUNC, rl_vi_char_search },		/* T */
+  { ISFUNC, rl_revert_line },			/* U */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* V */
+  { ISFUNC, rl_vi_next_word },			/* W */
+  { ISFUNC, rl_vi_rubout },			/* X */
+  { ISFUNC, rl_vi_yank_to },			/* Y */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Z */
+
+  /* Some more punctuation. */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* [ */
+  { ISFUNC, rl_vi_complete },			/* \ */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* ] */
+  { ISFUNC, rl_vi_first_print },		/* ^ */
+  { ISFUNC, rl_vi_yank_arg },			/* _ */
+  { ISFUNC, rl_vi_goto_mark },			/* ` */
+
+  /* Lowercase alphabet. */
+  { ISFUNC, rl_vi_append_mode },		/* a */
+  { ISFUNC, rl_vi_prev_word },			/* b */
+  { ISFUNC, rl_vi_change_to },			/* c */
+  { ISFUNC, rl_vi_delete_to },			/* d */
+  { ISFUNC, rl_vi_end_word },			/* e */
+  { ISFUNC, rl_vi_char_search },		/* f */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* g */
+  { ISFUNC, rl_backward_char },			/* h */
+  { ISFUNC, rl_vi_insert_mode },		/* i */
+  { ISFUNC, rl_get_next_history },		/* j */
+  { ISFUNC, rl_get_previous_history },		/* k */
+  { ISFUNC, rl_forward_char },			/* l */
+  { ISFUNC, rl_vi_set_mark },			/* m */
+  { ISFUNC, rl_vi_search_again },		/* n */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* o */
+  { ISFUNC, rl_vi_put },			/* p */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* q */
+  { ISFUNC, rl_vi_change_char },		/* r */
+  { ISFUNC, rl_vi_subst },			/* s */
+  { ISFUNC, rl_vi_char_search },		/* t */
+  { ISFUNC, rl_vi_undo },			/* u */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* v */
+  { ISFUNC, rl_vi_next_word },			/* w */
+  { ISFUNC, rl_vi_delete },			/* x */
+  { ISFUNC, rl_vi_yank_to },			/* y */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* z */
+
+  /* Final punctuation. */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* { */
+  { ISFUNC, rl_vi_column },			/* | */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* } */
+  { ISFUNC, rl_vi_change_case },		/* ~ */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* RUBOUT */
+
+#if KEYMAP_SIZE > 128
+  /* Undefined keys. */
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 }
+#endif /* KEYMAP_SIZE > 128 */
+};
+
+KEYMAP_ENTRY_ARRAY vi_insertion_keymap = {
+  /* The regular control keys come first. */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-@ */
+  { ISFUNC, rl_insert },			/* Control-a */
+  { ISFUNC, rl_insert },			/* Control-b */
+  { ISFUNC, rl_insert },			/* Control-c */
+  { ISFUNC, rl_vi_eof_maybe },			/* Control-d */
+  { ISFUNC, rl_insert },			/* Control-e */
+  { ISFUNC, rl_insert },			/* Control-f */
+  { ISFUNC, rl_insert },			/* Control-g */
+  { ISFUNC, rl_rubout },			/* Control-h */
+  { ISFUNC, rl_complete },			/* Control-i */
+  { ISFUNC, rl_newline },			/* Control-j */
+  { ISFUNC, rl_insert },			/* Control-k */
+  { ISFUNC, rl_insert },			/* Control-l */
+  { ISFUNC, rl_newline },			/* Control-m */
+  { ISFUNC, rl_menu_complete},			/* Control-n */
+  { ISFUNC, rl_insert },			/* Control-o */
+  { ISFUNC, rl_backward_menu_complete },	/* Control-p */
+  { ISFUNC, rl_insert },			/* Control-q */
+  { ISFUNC, rl_reverse_search_history },	/* Control-r */
+  { ISFUNC, rl_forward_search_history },	/* Control-s */
+  { ISFUNC, rl_transpose_chars },		/* Control-t */
+  { ISFUNC, rl_unix_line_discard },		/* Control-u */
+  { ISFUNC, rl_quoted_insert },			/* Control-v */
+  { ISFUNC, rl_vi_unix_word_rubout },		/* Control-w */
+  { ISFUNC, rl_insert },			/* Control-x */
+  { ISFUNC, rl_yank },				/* Control-y */
+  { ISFUNC, rl_insert },			/* Control-z */
+
+  { ISFUNC, rl_vi_movement_mode },		/* Control-[ */
+  { ISFUNC, rl_insert },			/* Control-\ */
+  { ISFUNC, rl_insert },			/* Control-] */
+  { ISFUNC, rl_insert },			/* Control-^ */
+  { ISFUNC, rl_vi_undo },			/* Control-_ */
+
+  /* The start of printing characters. */
+  { ISFUNC, rl_insert },			/* SPACE */
+  { ISFUNC, rl_insert },			/* ! */
+  { ISFUNC, rl_insert },			/* " */
+  { ISFUNC, rl_insert },			/* # */
+  { ISFUNC, rl_insert },			/* $ */
+  { ISFUNC, rl_insert },			/* % */
+  { ISFUNC, rl_insert },			/* & */
+  { ISFUNC, rl_insert },			/* ' */
+  { ISFUNC, rl_insert },			/* ( */
+  { ISFUNC, rl_insert },			/* ) */
+  { ISFUNC, rl_insert },			/* * */
+  { ISFUNC, rl_insert },			/* + */
+  { ISFUNC, rl_insert },			/* , */
+  { ISFUNC, rl_insert },			/* - */
+  { ISFUNC, rl_insert },			/* . */
+  { ISFUNC, rl_insert },			/* / */
+
+  /* Regular digits. */
+  { ISFUNC, rl_insert },			/* 0 */
+  { ISFUNC, rl_insert },			/* 1 */
+  { ISFUNC, rl_insert },			/* 2 */
+  { ISFUNC, rl_insert },			/* 3 */
+  { ISFUNC, rl_insert },			/* 4 */
+  { ISFUNC, rl_insert },			/* 5 */
+  { ISFUNC, rl_insert },			/* 6 */
+  { ISFUNC, rl_insert },			/* 7 */
+  { ISFUNC, rl_insert },			/* 8 */
+  { ISFUNC, rl_insert },			/* 9 */
+
+  /* A little more punctuation. */
+  { ISFUNC, rl_insert },			/* : */
+  { ISFUNC, rl_insert },			/* ; */
+  { ISFUNC, rl_insert },			/* < */
+  { ISFUNC, rl_insert },			/* = */
+  { ISFUNC, rl_insert },			/* > */
+  { ISFUNC, rl_insert },			/* ? */
+  { ISFUNC, rl_insert },			/* @ */
+
+  /* Uppercase alphabet. */
+  { ISFUNC, rl_insert },			/* A */
+  { ISFUNC, rl_insert },			/* B */
+  { ISFUNC, rl_insert },			/* C */
+  { ISFUNC, rl_insert },			/* D */
+  { ISFUNC, rl_insert },			/* E */
+  { ISFUNC, rl_insert },			/* F */
+  { ISFUNC, rl_insert },			/* G */
+  { ISFUNC, rl_insert },			/* H */
+  { ISFUNC, rl_insert },			/* I */
+  { ISFUNC, rl_insert },			/* J */
+  { ISFUNC, rl_insert },			/* K */
+  { ISFUNC, rl_insert },			/* L */
+  { ISFUNC, rl_insert },			/* M */
+  { ISFUNC, rl_insert },			/* N */
+  { ISFUNC, rl_insert },			/* O */
+  { ISFUNC, rl_insert },			/* P */
+  { ISFUNC, rl_insert },			/* Q */
+  { ISFUNC, rl_insert },			/* R */
+  { ISFUNC, rl_insert },			/* S */
+  { ISFUNC, rl_insert },			/* T */
+  { ISFUNC, rl_insert },			/* U */
+  { ISFUNC, rl_insert },			/* V */
+  { ISFUNC, rl_insert },			/* W */
+  { ISFUNC, rl_insert },			/* X */
+  { ISFUNC, rl_insert },			/* Y */
+  { ISFUNC, rl_insert },			/* Z */
+
+  /* Some more punctuation. */
+  { ISFUNC, rl_insert },			/* [ */
+  { ISFUNC, rl_insert },			/* \ */
+  { ISFUNC, rl_insert },			/* ] */
+  { ISFUNC, rl_insert },			/* ^ */
+  { ISFUNC, rl_insert },			/* _ */
+  { ISFUNC, rl_insert },			/* ` */
+
+  /* Lowercase alphabet. */
+  { ISFUNC, rl_insert },			/* a */
+  { ISFUNC, rl_insert },			/* b */
+  { ISFUNC, rl_insert },			/* c */
+  { ISFUNC, rl_insert },			/* d */
+  { ISFUNC, rl_insert },			/* e */
+  { ISFUNC, rl_insert },			/* f */
+  { ISFUNC, rl_insert },			/* g */
+  { ISFUNC, rl_insert },			/* h */
+  { ISFUNC, rl_insert },			/* i */
+  { ISFUNC, rl_insert },			/* j */
+  { ISFUNC, rl_insert },			/* k */
+  { ISFUNC, rl_insert },			/* l */
+  { ISFUNC, rl_insert },			/* m */
+  { ISFUNC, rl_insert },			/* n */
+  { ISFUNC, rl_insert },			/* o */
+  { ISFUNC, rl_insert },			/* p */
+  { ISFUNC, rl_insert },			/* q */
+  { ISFUNC, rl_insert },			/* r */
+  { ISFUNC, rl_insert },			/* s */
+  { ISFUNC, rl_insert },			/* t */
+  { ISFUNC, rl_insert },			/* u */
+  { ISFUNC, rl_insert },			/* v */
+  { ISFUNC, rl_insert },			/* w */
+  { ISFUNC, rl_insert },			/* x */
+  { ISFUNC, rl_insert },			/* y */
+  { ISFUNC, rl_insert },			/* z */
+
+  /* Final punctuation. */
+  { ISFUNC, rl_insert },			/* { */
+  { ISFUNC, rl_insert },			/* | */
+  { ISFUNC, rl_insert },			/* } */
+  { ISFUNC, rl_insert },			/* ~ */
+  { ISFUNC, rl_rubout },			/* RUBOUT */
+
+#if KEYMAP_SIZE > 128
+  /* Pure 8-bit characters (128 - 159).
+     These might be used in some
+     character sets. */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+  { ISFUNC, rl_insert },	/* ? */
+
+  /* ISO Latin-1 characters (160 - 255) */
+  { ISFUNC, rl_insert },	/* No-break space */
+  { ISFUNC, rl_insert },	/* Inverted exclamation mark */
+  { ISFUNC, rl_insert },	/* Cent sign */
+  { ISFUNC, rl_insert },	/* Pound sign */
+  { ISFUNC, rl_insert },	/* Currency sign */
+  { ISFUNC, rl_insert },	/* Yen sign */
+  { ISFUNC, rl_insert },	/* Broken bar */
+  { ISFUNC, rl_insert },	/* Section sign */
+  { ISFUNC, rl_insert },	/* Diaeresis */
+  { ISFUNC, rl_insert },	/* Copyright sign */
+  { ISFUNC, rl_insert },	/* Feminine ordinal indicator */
+  { ISFUNC, rl_insert },	/* Left pointing double angle quotation mark */
+  { ISFUNC, rl_insert },	/* Not sign */
+  { ISFUNC, rl_insert },	/* Soft hyphen */
+  { ISFUNC, rl_insert },	/* Registered sign */
+  { ISFUNC, rl_insert },	/* Macron */
+  { ISFUNC, rl_insert },	/* Degree sign */
+  { ISFUNC, rl_insert },	/* Plus-minus sign */
+  { ISFUNC, rl_insert },	/* Superscript two */
+  { ISFUNC, rl_insert },	/* Superscript three */
+  { ISFUNC, rl_insert },	/* Acute accent */
+  { ISFUNC, rl_insert },	/* Micro sign */
+  { ISFUNC, rl_insert },	/* Pilcrow sign */
+  { ISFUNC, rl_insert },	/* Middle dot */
+  { ISFUNC, rl_insert },	/* Cedilla */
+  { ISFUNC, rl_insert },	/* Superscript one */
+  { ISFUNC, rl_insert },	/* Masculine ordinal indicator */
+  { ISFUNC, rl_insert },	/* Right pointing double angle quotation mark */
+  { ISFUNC, rl_insert },	/* Vulgar fraction one quarter */
+  { ISFUNC, rl_insert },	/* Vulgar fraction one half */
+  { ISFUNC, rl_insert },	/* Vulgar fraction three quarters */
+  { ISFUNC, rl_insert },	/* Inverted questionk mark */
+  { ISFUNC, rl_insert },	/* Latin capital letter a with grave */
+  { ISFUNC, rl_insert },	/* Latin capital letter a with acute */
+  { ISFUNC, rl_insert },	/* Latin capital letter a with circumflex */
+  { ISFUNC, rl_insert },	/* Latin capital letter a with tilde */
+  { ISFUNC, rl_insert },	/* Latin capital letter a with diaeresis */
+  { ISFUNC, rl_insert },	/* Latin capital letter a with ring above */
+  { ISFUNC, rl_insert },	/* Latin capital letter ae */
+  { ISFUNC, rl_insert },	/* Latin capital letter c with cedilla */
+  { ISFUNC, rl_insert },	/* Latin capital letter e with grave */
+  { ISFUNC, rl_insert },	/* Latin capital letter e with acute */
+  { ISFUNC, rl_insert },	/* Latin capital letter e with circumflex */
+  { ISFUNC, rl_insert },	/* Latin capital letter e with diaeresis */
+  { ISFUNC, rl_insert },	/* Latin capital letter i with grave */
+  { ISFUNC, rl_insert },	/* Latin capital letter i with acute */
+  { ISFUNC, rl_insert },	/* Latin capital letter i with circumflex */
+  { ISFUNC, rl_insert },	/* Latin capital letter i with diaeresis */
+  { ISFUNC, rl_insert },	/* Latin capital letter eth (Icelandic) */
+  { ISFUNC, rl_insert },	/* Latin capital letter n with tilde */
+  { ISFUNC, rl_insert },	/* Latin capital letter o with grave */
+  { ISFUNC, rl_insert },	/* Latin capital letter o with acute */
+  { ISFUNC, rl_insert },	/* Latin capital letter o with circumflex */
+  { ISFUNC, rl_insert },	/* Latin capital letter o with tilde */
+  { ISFUNC, rl_insert },	/* Latin capital letter o with diaeresis */
+  { ISFUNC, rl_insert },	/* Multiplication sign */
+  { ISFUNC, rl_insert },	/* Latin capital letter o with stroke */
+  { ISFUNC, rl_insert },	/* Latin capital letter u with grave */
+  { ISFUNC, rl_insert },	/* Latin capital letter u with acute */
+  { ISFUNC, rl_insert },	/* Latin capital letter u with circumflex */
+  { ISFUNC, rl_insert },	/* Latin capital letter u with diaeresis */
+  { ISFUNC, rl_insert },	/* Latin capital letter Y with acute */
+  { ISFUNC, rl_insert },	/* Latin capital letter thorn (Icelandic) */
+  { ISFUNC, rl_insert },	/* Latin small letter sharp s (German) */
+  { ISFUNC, rl_insert },	/* Latin small letter a with grave */
+  { ISFUNC, rl_insert },	/* Latin small letter a with acute */
+  { ISFUNC, rl_insert },	/* Latin small letter a with circumflex */
+  { ISFUNC, rl_insert },	/* Latin small letter a with tilde */
+  { ISFUNC, rl_insert },	/* Latin small letter a with diaeresis */
+  { ISFUNC, rl_insert },	/* Latin small letter a with ring above */
+  { ISFUNC, rl_insert },	/* Latin small letter ae */
+  { ISFUNC, rl_insert },	/* Latin small letter c with cedilla */
+  { ISFUNC, rl_insert },	/* Latin small letter e with grave */
+  { ISFUNC, rl_insert },	/* Latin small letter e with acute */
+  { ISFUNC, rl_insert },	/* Latin small letter e with circumflex */
+  { ISFUNC, rl_insert },	/* Latin small letter e with diaeresis */
+  { ISFUNC, rl_insert },	/* Latin small letter i with grave */
+  { ISFUNC, rl_insert },	/* Latin small letter i with acute */
+  { ISFUNC, rl_insert },	/* Latin small letter i with circumflex */
+  { ISFUNC, rl_insert },	/* Latin small letter i with diaeresis */
+  { ISFUNC, rl_insert },	/* Latin small letter eth (Icelandic) */
+  { ISFUNC, rl_insert },	/* Latin small letter n with tilde */
+  { ISFUNC, rl_insert },	/* Latin small letter o with grave */
+  { ISFUNC, rl_insert },	/* Latin small letter o with acute */
+  { ISFUNC, rl_insert },	/* Latin small letter o with circumflex */
+  { ISFUNC, rl_insert },	/* Latin small letter o with tilde */
+  { ISFUNC, rl_insert },	/* Latin small letter o with diaeresis */
+  { ISFUNC, rl_insert },	/* Division sign */
+  { ISFUNC, rl_insert },	/* Latin small letter o with stroke */
+  { ISFUNC, rl_insert },	/* Latin small letter u with grave */
+  { ISFUNC, rl_insert },	/* Latin small letter u with acute */
+  { ISFUNC, rl_insert },	/* Latin small letter u with circumflex */
+  { ISFUNC, rl_insert },	/* Latin small letter u with diaeresis */
+  { ISFUNC, rl_insert },	/* Latin small letter y with acute */
+  { ISFUNC, rl_insert },	/* Latin small letter thorn (Icelandic) */
+  { ISFUNC, rl_insert }		/* Latin small letter y with diaeresis */
+#endif /* KEYMAP_SIZE > 128 */
+};
+
+/* Unused for the time being. */
+#if 0
+KEYMAP_ENTRY_ARRAY vi_escape_keymap = {
+  /* The regular control keys come first. */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-@ */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-a */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-b */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-c */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-d */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-e */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-f */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-g */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-h */
+  { ISFUNC, rl_tab_insert},			/* Control-i */
+  { ISFUNC, rl_emacs_editing_mode},		/* Control-j */
+  { ISFUNC, rl_kill_line },			/* Control-k */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-l */
+  { ISFUNC, rl_emacs_editing_mode},		/* Control-m */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-n */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-o */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-p */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-q */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-r */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-s */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-t */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-u */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-v */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-w */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-x */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-y */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-z */
+
+  { ISFUNC, rl_vi_movement_mode },		/* Control-[ */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-\ */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-] */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* Control-^ */
+  { ISFUNC, rl_vi_undo },			/* Control-_ */
+
+  /* The start of printing characters. */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* SPACE */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* ! */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* " */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* # */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* $ */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* % */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* & */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* ' */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* ( */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* ) */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* * */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* + */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* , */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* - */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* . */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* / */
+
+  /* Regular digits. */
+  { ISFUNC, rl_vi_arg_digit },			/* 0 */
+  { ISFUNC, rl_vi_arg_digit },			/* 1 */
+  { ISFUNC, rl_vi_arg_digit },			/* 2 */
+  { ISFUNC, rl_vi_arg_digit },			/* 3 */
+  { ISFUNC, rl_vi_arg_digit },			/* 4 */
+  { ISFUNC, rl_vi_arg_digit },			/* 5 */
+  { ISFUNC, rl_vi_arg_digit },			/* 6 */
+  { ISFUNC, rl_vi_arg_digit },			/* 7 */
+  { ISFUNC, rl_vi_arg_digit },			/* 8 */
+  { ISFUNC, rl_vi_arg_digit },			/* 9 */
+
+  /* A little more punctuation. */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* : */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* ; */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* < */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* = */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* > */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* ? */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* @ */
+
+  /* Uppercase alphabet. */
+  { ISFUNC, rl_do_lowercase_version },		/* A */
+  { ISFUNC, rl_do_lowercase_version },		/* B */
+  { ISFUNC, rl_do_lowercase_version },		/* C */
+  { ISFUNC, rl_do_lowercase_version },		/* D */
+  { ISFUNC, rl_do_lowercase_version },		/* E */
+  { ISFUNC, rl_do_lowercase_version },		/* F */
+  { ISFUNC, rl_do_lowercase_version },		/* G */
+  { ISFUNC, rl_do_lowercase_version },		/* H */
+  { ISFUNC, rl_do_lowercase_version },		/* I */
+  { ISFUNC, rl_do_lowercase_version },		/* J */
+  { ISFUNC, rl_do_lowercase_version },		/* K */
+  { ISFUNC, rl_do_lowercase_version },		/* L */
+  { ISFUNC, rl_do_lowercase_version },		/* M */
+  { ISFUNC, rl_do_lowercase_version },		/* N */
+  { ISFUNC, rl_do_lowercase_version },		/* O */
+  { ISFUNC, rl_do_lowercase_version },		/* P */
+  { ISFUNC, rl_do_lowercase_version },		/* Q */
+  { ISFUNC, rl_do_lowercase_version },		/* R */
+  { ISFUNC, rl_do_lowercase_version },		/* S */
+  { ISFUNC, rl_do_lowercase_version },		/* T */
+  { ISFUNC, rl_do_lowercase_version },		/* U */
+  { ISFUNC, rl_do_lowercase_version },		/* V */
+  { ISFUNC, rl_do_lowercase_version },		/* W */
+  { ISFUNC, rl_do_lowercase_version },		/* X */
+  { ISFUNC, rl_do_lowercase_version },		/* Y */
+  { ISFUNC, rl_do_lowercase_version },		/* Z */
+
+  /* Some more punctuation. */
+  { ISFUNC, rl_arrow_keys },			/* [ */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* \ */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* ] */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* ^ */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* _ */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* ` */
+
+  /* Lowercase alphabet. */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* a */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* b */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* c */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* d */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* e */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* f */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* g */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* h */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* i */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* j */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* k */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* l */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* m */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* n */
+  { ISFUNC, rl_arrow_keys },			/* o */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* p */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* q */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* r */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* s */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* t */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* u */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* v */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* w */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* x */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* y */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* z */
+
+  /* Final punctuation. */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* { */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* | */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* } */
+  { ISFUNC, (rl_command_func_t *)0x0 },		/* ~ */
+  { ISFUNC, rl_backward_kill_word },		/* RUBOUT */
+
+#if KEYMAP_SIZE > 128
+  /* Undefined keys. */
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 },
+  { ISFUNC, (rl_command_func_t *)0x0 }
+#endif /* KEYMAP_SIZE > 128 */
+};
+#endif
diff --git a/lib/readline/vi_mode.c b/lib/readline/vi_mode.c
new file mode 100644
index 0000000..742341e
--- /dev/null
+++ b/lib/readline/vi_mode.c
@@ -0,0 +1,2408 @@
+/* vi_mode.c -- A vi emulation mode for Bash.
+   Derived from code written by Jeff Sparkes (jsparkes@bnr.ca).  */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+/* **************************************************************** */
+/*								    */
+/*			VI Emulation Mode			    */
+/*								    */
+/* **************************************************************** */
+#include "rlconf.h"
+
+#if defined (VI_MODE)
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <sys/types.h>
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+
+/* Some standard library routines. */
+#include "rldefs.h"
+#include "rlmbutil.h"
+
+#include "readline.h"
+#include "history.h"
+
+#include "rlprivate.h"
+#include "xmalloc.h"
+
+#ifndef member
+#define member(c, s) ((c) ? (char *)strchr ((s), (c)) != (char *)NULL : 0)
+#endif
+
+/* Increment START to the next character in RL_LINE_BUFFER, handling multibyte chars */
+#if defined (HANDLE_MULTIBYTE)
+#define INCREMENT_POS(start) \
+  do { \
+	if (MB_CUR_MAX == 1 || rl_byte_oriented) \
+	  start++; \
+	else \
+	  start = _rl_find_next_mbchar (rl_line_buffer, start, 1, MB_FIND_ANY); \
+  } while (0)
+#else /* !HANDLE_MULTIBYTE */
+#define INCREMENT_POS(start)    (start)++
+#endif /* !HANDLE_MULTIBYTE */
+
+/* This is global so other parts of the code can check whether the last
+   command was a text modification command. */
+int _rl_vi_last_command = 'i';	/* default `.' puts you in insert mode */
+
+_rl_vimotion_cxt *_rl_vimvcxt = 0;
+
+/* Non-zero indicates we are redoing a vi-mode command with `.' */
+int _rl_vi_redoing;
+
+/* Non-zero means enter insertion mode. */
+static int _rl_vi_doing_insert;
+
+/* Command keys which do movement for xxx_to commands. */
+static const char * const vi_motion = " hl^$0ftFT;,%wbeWBE|`";
+
+/* Keymap used for vi replace characters.  Created dynamically since
+   rarely used. */
+static Keymap vi_replace_map;
+
+/* The number of characters inserted in the last replace operation. */
+static int vi_replace_count;
+
+/* If non-zero, we have text inserted after a c[motion] command that put
+   us implicitly into insert mode.  Some people want this text to be
+   attached to the command so that it is `redoable' with `.'. */
+static int vi_continued_command;
+static char *vi_insert_buffer;
+static int vi_insert_buffer_size;
+
+static int _rl_vi_last_repeat = 1;
+static int _rl_vi_last_arg_sign = 1;
+static int _rl_vi_last_motion;
+#if defined (HANDLE_MULTIBYTE)
+static char _rl_vi_last_search_mbchar[MB_LEN_MAX];
+static int _rl_vi_last_search_mblen;
+#else
+static int _rl_vi_last_search_char;
+#endif
+static char _rl_vi_last_replacement[MB_LEN_MAX+1];	/* reserve for trailing NULL */
+
+static int _rl_vi_last_key_before_insert;
+
+/* Text modification commands.  These are the `redoable' commands. */
+static const char * const vi_textmod = "_*\\AaIiCcDdPpYyRrSsXx~";
+
+/* Arrays for the saved marks. */
+static int vi_mark_chars['z' - 'a' + 1];
+
+static void _rl_vi_replace_insert PARAMS((int));
+static void _rl_vi_save_replace PARAMS((void));
+static void _rl_vi_stuff_insert PARAMS((int));
+static void _rl_vi_save_insert PARAMS((UNDO_LIST *));
+
+static void vi_save_insert_buffer PARAMS ((int, int));
+
+static inline void _rl_vi_backup PARAMS((void));
+
+static int _rl_vi_arg_dispatch PARAMS((int));
+static int rl_digit_loop1 PARAMS((void));
+
+static int _rl_vi_set_mark PARAMS((void));
+static int _rl_vi_goto_mark PARAMS((void));
+
+static inline int _rl_vi_advance_point PARAMS((void));
+static inline int _rl_vi_backup_point PARAMS((void));
+
+static void _rl_vi_append_forward PARAMS((int));
+
+static int _rl_vi_callback_getchar PARAMS((char *, int));
+
+#if defined (READLINE_CALLBACKS)
+static int _rl_vi_callback_set_mark PARAMS((_rl_callback_generic_arg *));
+static int _rl_vi_callback_goto_mark PARAMS((_rl_callback_generic_arg *));
+static int _rl_vi_callback_change_char PARAMS((_rl_callback_generic_arg *));
+static int _rl_vi_callback_char_search PARAMS((_rl_callback_generic_arg *));
+#endif
+
+static int rl_domove_read_callback PARAMS((_rl_vimotion_cxt *));
+static int rl_domove_motion_callback PARAMS((_rl_vimotion_cxt *));
+static int rl_vi_domove_getchar PARAMS((_rl_vimotion_cxt *));
+
+static int vi_change_dispatch PARAMS((_rl_vimotion_cxt *));
+static int vi_delete_dispatch PARAMS((_rl_vimotion_cxt *));
+static int vi_yank_dispatch PARAMS((_rl_vimotion_cxt *));
+
+static int vidomove_dispatch PARAMS((_rl_vimotion_cxt *));
+
+void
+_rl_vi_initialize_line (void)
+{
+  register int i, n;
+
+  n = sizeof (vi_mark_chars) / sizeof (vi_mark_chars[0]);
+  for (i = 0; i < n; i++)
+    vi_mark_chars[i] = -1;
+
+  RL_UNSETSTATE(RL_STATE_VICMDONCE);
+}
+
+void
+_rl_vi_reset_last (void)
+{
+  _rl_vi_last_command = 'i';
+  _rl_vi_last_repeat = 1;
+  _rl_vi_last_arg_sign = 1;
+  _rl_vi_last_motion = 0;
+}
+
+void
+_rl_vi_set_last (int key, int repeat, int sign)
+{
+  _rl_vi_last_command = key;
+  _rl_vi_last_repeat = repeat;
+  _rl_vi_last_arg_sign = sign;
+}
+
+/* A convenience function that calls _rl_vi_set_last to save the last command
+   information and enters insertion mode. */
+void
+rl_vi_start_inserting (int key, int repeat, int sign)
+{
+  _rl_vi_set_last (key, repeat, sign);
+  rl_begin_undo_group ();		/* ensure inserts aren't concatenated */
+  rl_vi_insertion_mode (1, key);
+}
+
+/* Is the command C a VI mode text modification command? */
+int
+_rl_vi_textmod_command (int c)
+{
+  return (member (c, vi_textmod));
+}
+
+int
+_rl_vi_motion_command (int c)
+{
+  return (member (c, vi_motion));
+}
+
+static void
+_rl_vi_replace_insert (int count)
+{
+  int nchars;
+
+  nchars = strlen (vi_insert_buffer);
+
+  rl_begin_undo_group ();
+  while (count--)
+    /* nchars-1 to compensate for _rl_replace_text using `end+1' in call
+       to rl_delete_text */
+    _rl_replace_text (vi_insert_buffer, rl_point, rl_point+nchars-1);
+  rl_end_undo_group ();
+}
+
+static void
+_rl_vi_stuff_insert (int count)
+{
+  rl_begin_undo_group ();
+  while (count--)
+    rl_insert_text (vi_insert_buffer);
+  rl_end_undo_group ();
+}
+
+/* Bound to `.'.  Called from command mode, so we know that we have to
+   redo a text modification command.  The default for _rl_vi_last_command
+   puts you back into insert mode. */
+int
+rl_vi_redo (int count, int c)
+{
+  int r;
+
+  if (rl_explicit_arg == 0)
+    {
+      rl_numeric_arg = _rl_vi_last_repeat;
+      rl_arg_sign = _rl_vi_last_arg_sign;
+    }
+
+  r = 0;
+  _rl_vi_redoing = 1;
+  /* If we're redoing an insert with `i', stuff in the inserted text
+     and do not go into insertion mode. */
+  if (_rl_vi_last_command == 'i' && vi_insert_buffer && *vi_insert_buffer)
+    {
+      _rl_vi_stuff_insert (count);
+      /* And back up point over the last character inserted. */
+      if (rl_point > 0)
+	_rl_vi_backup ();
+    }
+  else if (_rl_vi_last_command == 'R' && vi_insert_buffer && *vi_insert_buffer)
+    {
+      _rl_vi_replace_insert (count);
+      /* And back up point over the last character inserted. */
+      if (rl_point > 0)
+	_rl_vi_backup ();
+    }
+  /* Ditto for redoing an insert with `I', but move to the beginning of the
+     line like the `I' command does. */
+  else if (_rl_vi_last_command == 'I' && vi_insert_buffer && *vi_insert_buffer)
+    {
+      rl_beg_of_line (1, 'I');
+      _rl_vi_stuff_insert (count);
+      if (rl_point > 0)
+	_rl_vi_backup ();
+    }
+  /* Ditto for redoing an insert with `a', but move forward a character first
+     like the `a' command does. */
+  else if (_rl_vi_last_command == 'a' && vi_insert_buffer && *vi_insert_buffer)
+    {
+      _rl_vi_append_forward ('a');
+      _rl_vi_stuff_insert (count);
+      if (rl_point > 0)
+	_rl_vi_backup ();
+    }
+  /* Ditto for redoing an insert with `A', but move to the end of the line
+     like the `A' command does. */
+  else if (_rl_vi_last_command == 'A' && vi_insert_buffer && *vi_insert_buffer)
+    {
+      rl_end_of_line (1, 'A');
+      _rl_vi_stuff_insert (count);
+      if (rl_point > 0)
+	_rl_vi_backup ();
+    }
+  else if (_rl_vi_last_command == '.' && _rl_keymap == vi_movement_keymap)
+    {
+      rl_ding ();
+      r = 0;
+    }
+  else
+    r = _rl_dispatch (_rl_vi_last_command, _rl_keymap);
+
+  _rl_vi_redoing = 0;
+
+  return (r);
+}
+
+/* A placeholder for further expansion. */
+int
+rl_vi_undo (int count, int key)
+{
+  return (rl_undo_command (count, key));
+}
+    
+/* Yank the nth arg from the previous line into this line at point. */
+int
+rl_vi_yank_arg (int count, int key)
+{
+  /* Readline thinks that the first word on a line is the 0th, while vi
+     thinks the first word on a line is the 1st.  Compensate. */
+  if (rl_explicit_arg)
+    rl_yank_nth_arg (count - 1, key);
+  else
+    rl_yank_nth_arg ('$', key);
+
+  return (0);
+}
+
+/* With an argument, move back that many history lines, else move to the
+   beginning of history. */
+int
+rl_vi_fetch_history (int count, int c)
+{
+  int wanted;
+
+  /* Giving an argument of n means we want the nth command in the history
+     file.  The command number is interpreted the same way that the bash
+     `history' command does it -- that is, giving an argument count of 450
+     to this command would get the command listed as number 450 in the
+     output of `history'. */
+  if (rl_explicit_arg)
+    {
+      wanted = history_base + where_history () - count;
+      if (wanted <= 0)
+        rl_beginning_of_history (0, 0);
+      else
+        rl_get_previous_history (wanted, c);
+    }
+  else
+    rl_beginning_of_history (count, 0);
+  return (0);
+}
+
+/* Search again for the last thing searched for. */
+int
+rl_vi_search_again (int count, int key)
+{
+  switch (key)
+    {
+    case 'n':
+      rl_noninc_reverse_search_again (count, key);
+      break;
+
+    case 'N':
+      rl_noninc_forward_search_again (count, key);
+      break;
+    }
+  return (0);
+}
+
+/* Do a vi style search. */
+int
+rl_vi_search (int count, int key)
+{
+  switch (key)
+    {
+    case '?':
+      _rl_free_saved_history_line ();
+      rl_noninc_forward_search (count, key);
+      break;
+
+    case '/':
+      _rl_free_saved_history_line ();
+      rl_noninc_reverse_search (count, key);
+      break;
+
+    default:
+      rl_ding ();
+      break;
+    }
+  return (0);
+}
+
+/* Completion, from vi's point of view. */
+int
+rl_vi_complete (int ignore, int key)
+{
+  if ((rl_point < rl_end) && (!whitespace (rl_line_buffer[rl_point])))
+    {
+      if (!whitespace (rl_line_buffer[rl_point + 1]))
+	rl_vi_end_word (1, 'E');
+      _rl_vi_advance_point ();
+    }
+
+  if (key == '*')
+    rl_complete_internal ('*');	/* Expansion and replacement. */
+  else if (key == '=')
+    rl_complete_internal ('?');	/* List possible completions. */
+  else if (key == '\\')
+    rl_complete_internal (TAB);	/* Standard Readline completion. */
+  else
+    rl_complete (0, key);
+
+  if (key == '*' || key == '\\')
+    rl_vi_start_inserting (key, 1, rl_arg_sign);
+
+  return (0);
+}
+
+/* Tilde expansion for vi mode. */
+int
+rl_vi_tilde_expand (int ignore, int key)
+{
+  rl_tilde_expand (0, key);
+  rl_vi_start_inserting (key, 1, rl_arg_sign);
+  return (0);
+}
+
+/* Previous word in vi mode. */
+int
+rl_vi_prev_word (int count, int key)
+{
+  if (count < 0)
+    return (rl_vi_next_word (-count, key));
+
+  if (rl_point == 0)
+    {
+      rl_ding ();
+      return (0);
+    }
+
+  if (_rl_uppercase_p (key))
+    rl_vi_bWord (count, key);
+  else
+    rl_vi_bword (count, key);
+
+  return (0);
+}
+
+/* Next word in vi mode. */
+int
+rl_vi_next_word (int count, int key)
+{
+  if (count < 0)
+    return (rl_vi_prev_word (-count, key));
+
+  if (rl_point >= (rl_end - 1))
+    {
+      rl_ding ();
+      return (0);
+    }
+
+  if (_rl_uppercase_p (key))
+    rl_vi_fWord (count, key);
+  else
+    rl_vi_fword (count, key);
+  return (0);
+}
+
+static inline int
+_rl_vi_advance_point (void)
+{
+  int point;
+
+  point = rl_point;
+  if (rl_point < rl_end)
+#if defined (HANDLE_MULTIBYTE)
+    {
+      if (MB_CUR_MAX == 1 || rl_byte_oriented)
+	rl_point++;
+      else
+	{
+	  point = rl_point;
+	  rl_point = _rl_forward_char_internal (1);
+	  if (point == rl_point || rl_point > rl_end)
+	    rl_point = rl_end;
+	}
+    }
+#else
+    rl_point++;
+#endif
+
+  return point;
+}
+
+/* Move the cursor back one character. */
+static inline void
+_rl_vi_backup (void)
+{
+  if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+    rl_point = _rl_find_prev_mbchar (rl_line_buffer, rl_point, MB_FIND_NONZERO);
+  else
+    rl_point--;
+}
+
+/* Move the point back one character, returning the starting value and not
+   doing anything at the beginning of the line */
+static inline int
+_rl_vi_backup_point (void)
+{
+  int point;
+
+  point = rl_point;
+  if (rl_point > 0)
+#if defined (HANDLE_MULTIBYTE)
+    {
+      if (MB_CUR_MAX == 1 || rl_byte_oriented)
+	rl_point--;
+      else
+	{
+	  point = rl_point;
+	  rl_point = _rl_backward_char_internal (1);
+	  if (rl_point < 0)
+	    rl_point = 0;		/* XXX - not really necessary */
+	}
+    }
+#else
+    rl_point--;
+#endif
+  return point;
+}
+
+/* Move to the end of the ?next? word. */
+int
+rl_vi_end_word (int count, int key)
+{
+  if (count < 0)
+    {
+      rl_ding ();
+      return 1;
+    }
+
+  if (_rl_uppercase_p (key))
+    rl_vi_eWord (count, key);
+  else
+    rl_vi_eword (count, key);
+  return (0);
+}
+
+/* Move forward a word the way that 'W' does. */
+int
+rl_vi_fWord (int count, int ignore)
+{
+  while (count-- && rl_point < (rl_end - 1))
+    {
+      /* Skip until whitespace. */
+      while (!whitespace (rl_line_buffer[rl_point]) && rl_point < rl_end)
+	_rl_vi_advance_point ();
+
+      /* Now skip whitespace. */
+      while (whitespace (rl_line_buffer[rl_point]) && rl_point < rl_end)
+	_rl_vi_advance_point ();
+    }
+  return (0);
+}
+
+int
+rl_vi_bWord (int count, int ignore)
+{
+  while (count-- && rl_point > 0)
+    {
+      /* If we are at the start of a word, move back to whitespace so
+	 we will go back to the start of the previous word. */
+      if (!whitespace (rl_line_buffer[rl_point]) &&
+	  whitespace (rl_line_buffer[rl_point - 1]))
+	rl_point--;
+
+      while (rl_point > 0 && whitespace (rl_line_buffer[rl_point]))
+	_rl_vi_backup_point ();
+
+      if (rl_point > 0)
+	{
+	  do
+	    _rl_vi_backup_point ();
+	  while (rl_point > 0 && !whitespace (rl_line_buffer[rl_point]));
+	  if (rl_point > 0)	/* hit whitespace */
+	    rl_point++;		
+
+	  if (rl_point < 0)
+	    rl_point = 0;
+	}
+    }
+  return (0);
+}
+
+int
+rl_vi_eWord (int count, int ignore)
+{
+  int opoint;
+
+  while (count-- && rl_point < (rl_end - 1))
+    {
+      if (whitespace (rl_line_buffer[rl_point]) == 0)
+	_rl_vi_advance_point ();
+
+      /* Move to the next non-whitespace character (to the start of the
+	 next word). */
+      while (rl_point < rl_end && whitespace (rl_line_buffer[rl_point]))
+	_rl_vi_advance_point ();
+
+      if (rl_point && rl_point < rl_end)
+	{
+	  opoint = rl_point;
+
+	  /* Skip whitespace. */
+	  while (rl_point < rl_end && whitespace (rl_line_buffer[rl_point]))
+	    opoint = _rl_vi_advance_point ();	/* XXX - why? */
+
+	  /* Skip until whitespace. */
+	  while (rl_point < rl_end && !whitespace (rl_line_buffer[rl_point]))
+	    opoint = _rl_vi_advance_point ();
+
+	  /* Move back to the last character of the word. */
+	  rl_point = opoint;
+	}
+    }
+  return (0);
+}
+
+int
+rl_vi_fword (int count, int ignore)
+{
+  int opoint;
+
+  while (count-- && rl_point < (rl_end - 1))
+    {
+      /* Move to white space (really non-identifer). */
+      if (_rl_isident (rl_line_buffer[rl_point]))
+	{
+	  while (_rl_isident (rl_line_buffer[rl_point]) && rl_point < rl_end)
+	    _rl_vi_advance_point ();
+	}
+      else /* if (!whitespace (rl_line_buffer[rl_point])) */
+	{
+	  while (!_rl_isident (rl_line_buffer[rl_point]) &&
+		 !whitespace (rl_line_buffer[rl_point]) && rl_point < rl_end)
+	    _rl_vi_advance_point ();
+	}
+
+      opoint = rl_point;
+
+      /* Move past whitespace. */
+      while (whitespace (rl_line_buffer[rl_point]) && rl_point < rl_end)
+	opoint = _rl_vi_advance_point ();
+    }
+  return (0);
+}
+
+int
+rl_vi_bword (int count, int ignore)
+{
+  int opoint;
+
+  while (count-- && rl_point > 0)
+    {
+      int prev_is_ident, cur_is_ident;
+
+      /* If we are at the start of a word, move back to whitespace
+	 so we will go back to the start of the previous word. */
+      if (!whitespace (rl_line_buffer[rl_point]) &&
+	  whitespace (rl_line_buffer[rl_point - 1]))
+	if (--rl_point == 0)
+	  break;
+
+      /* If this character and the previous character are `opposite', move
+	 back so we don't get messed up by the rl_point++ down there in
+	 the while loop.  Without this code, words like `l;' screw up the
+	 function. */
+      cur_is_ident = _rl_isident (rl_line_buffer[rl_point]);
+      opoint = _rl_vi_backup_point ();
+      prev_is_ident = _rl_isident (rl_line_buffer[rl_point]);
+      if ((cur_is_ident && !prev_is_ident) || (!cur_is_ident && prev_is_ident))
+	;	/* leave point alone, we backed it up one character */
+      else
+	rl_point = opoint;
+
+      while (rl_point > 0 && whitespace (rl_line_buffer[rl_point]))
+	_rl_vi_backup_point ();
+
+      if (rl_point > 0)
+	{
+	  opoint = rl_point;
+	  if (_rl_isident (rl_line_buffer[rl_point]))
+	    do
+	      opoint = _rl_vi_backup_point ();
+	    while (rl_point > 0 && _rl_isident (rl_line_buffer[rl_point]));
+	  else
+	    do
+	      opoint = _rl_vi_backup_point ();
+	    while (rl_point > 0 && !_rl_isident (rl_line_buffer[rl_point]) &&
+		   !whitespace (rl_line_buffer[rl_point]));
+
+	  if (rl_point > 0)
+	    rl_point = opoint;
+
+	  if (rl_point < 0)
+	    rl_point = 0;
+	}
+    }
+  return (0);
+}
+
+int
+rl_vi_eword (int count, int ignore)
+{
+  int opoint;
+
+  while (count-- && rl_point < (rl_end - 1))
+    {
+      if (whitespace (rl_line_buffer[rl_point]) == 0)
+	_rl_vi_advance_point ();
+
+      while (rl_point < rl_end && whitespace (rl_line_buffer[rl_point]))
+	_rl_vi_advance_point ();
+
+      opoint = rl_point;
+      if (rl_point < rl_end)
+	{
+	  if (_rl_isident (rl_line_buffer[rl_point]))
+	    do
+	      {
+		opoint = _rl_vi_advance_point ();
+	      }
+	    while (rl_point < rl_end && _rl_isident (rl_line_buffer[rl_point]));
+	  else
+	    do
+	      {
+		opoint = _rl_vi_advance_point ();
+	      }
+	    while (rl_point < rl_end && !_rl_isident (rl_line_buffer[rl_point])
+		   && !whitespace (rl_line_buffer[rl_point]));
+	}
+      rl_point = opoint;
+    }
+  return (0);
+}
+
+int
+rl_vi_insert_beg (int count, int key)
+{
+  rl_beg_of_line (1, key);
+  rl_vi_insert_mode (1, key);
+  return (0);
+}
+
+static void
+_rl_vi_append_forward (int key)
+{
+  _rl_vi_advance_point ();
+}
+
+int
+rl_vi_append_mode (int count, int key)
+{
+  _rl_vi_append_forward (key);
+  rl_vi_start_inserting (key, 1, rl_arg_sign);
+  return (0);
+}
+
+int
+rl_vi_append_eol (int count, int key)
+{
+  rl_end_of_line (1, key);
+  rl_vi_append_mode (1, key);
+  return (0);
+}
+
+/* What to do in the case of C-d. */
+int
+rl_vi_eof_maybe (int count, int c)
+{
+  return (rl_newline (1, '\n'));
+}
+
+/* Insertion mode stuff. */
+
+/* Switching from one mode to the other really just involves
+   switching keymaps. */
+int
+rl_vi_insertion_mode (int count, int key)
+{
+  _rl_keymap = vi_insertion_keymap;
+  _rl_vi_last_key_before_insert = key;
+  if (_rl_show_mode_in_prompt)
+    _rl_reset_prompt ();
+  return (0);
+}
+
+int
+rl_vi_insert_mode (int count, int key)
+{
+  rl_vi_start_inserting (key, 1, rl_arg_sign);
+  return (0);
+}
+
+static void
+vi_save_insert_buffer (int start, int len)
+{
+  /* Same code as _rl_vi_save_insert below */
+  if (len >= vi_insert_buffer_size)
+    {
+      vi_insert_buffer_size += (len + 32) - (len % 32);
+      vi_insert_buffer = (char *)xrealloc (vi_insert_buffer, vi_insert_buffer_size);
+    }
+  strncpy (vi_insert_buffer, rl_line_buffer + start, len - 1);
+  vi_insert_buffer[len-1] = '\0';
+}
+
+static void
+_rl_vi_save_replace (void)
+{
+  int len, start, end;
+  UNDO_LIST *up;
+
+  up = rl_undo_list;
+  if (up == 0 || up->what != UNDO_END || vi_replace_count <= 0)
+    {
+      if (vi_insert_buffer_size >= 1)
+	vi_insert_buffer[0] = '\0';
+      return;
+    }
+  /* Let's try it the quick and easy way for now.  This should essentially
+     accommodate every UNDO_INSERT and save the inserted text to
+     vi_insert_buffer */
+  end = rl_point;
+  start = end - vi_replace_count + 1;
+  len = vi_replace_count + 1;
+
+  if (start < 0)
+    {
+      len = end + 1;
+      start = 0;
+    }
+
+  vi_save_insert_buffer (start, len);  
+}
+
+static void
+_rl_vi_save_insert (UNDO_LIST *up)
+{
+  int len, start, end;
+
+  if (up == 0 || up->what != UNDO_INSERT)
+    {
+      if (vi_insert_buffer_size >= 1)
+	vi_insert_buffer[0] = '\0';
+      return;
+    }
+
+  start = up->start;
+  end = up->end;
+  len = end - start + 1;
+
+  vi_save_insert_buffer (start, len);
+}
+    
+void
+_rl_vi_done_inserting (void)
+{
+  if (_rl_vi_doing_insert)
+    {
+      /* The `c', `s', `S', and `R' commands set this. */
+      rl_end_undo_group ();	/* for the group in rl_vi_start_inserting */
+      /* Now, the text between rl_undo_list->next->start and
+	 rl_undo_list->next->end is what was inserted while in insert
+	 mode.  It gets copied to VI_INSERT_BUFFER because it depends
+	 on absolute indices into the line which may change (though they
+	 probably will not). */
+      _rl_vi_doing_insert = 0;
+      if (_rl_vi_last_key_before_insert == 'R')
+	_rl_vi_save_replace ();		/* Half the battle */
+      else
+	_rl_vi_save_insert (rl_undo_list->next);
+      /* sanity check, should always be >= 1 here */
+      if (_rl_undo_group_level > 0)
+	rl_end_undo_group ();	/* for the group in the command (change or replace) */
+    }
+  else
+    {
+      if (rl_undo_list && (_rl_vi_last_key_before_insert == 'i' ||
+			   _rl_vi_last_key_before_insert == 'a' ||
+			   _rl_vi_last_key_before_insert == 'I' ||
+			   _rl_vi_last_key_before_insert == 'A'))
+	_rl_vi_save_insert (rl_undo_list);
+      /* XXX - Other keys probably need to be checked. */
+      else if (_rl_vi_last_key_before_insert == 'C')
+	rl_end_undo_group ();
+    }
+
+  /* Sanity check, make sure all the undo groups are closed before we leave
+     insert mode */
+  while (_rl_undo_group_level > 0)
+    rl_end_undo_group ();
+}
+
+int
+rl_vi_movement_mode (int count, int key)
+{
+  if (rl_point > 0)
+    rl_backward_char (1, key);
+
+  _rl_keymap = vi_movement_keymap;
+  _rl_vi_done_inserting ();
+
+  /* This is how POSIX.2 says `U' should behave -- everything up until the
+     first time you go into command mode should not be undone. */
+  if (RL_ISSTATE (RL_STATE_VICMDONCE) == 0)
+    rl_free_undo_list ();
+
+  if (_rl_show_mode_in_prompt)
+    _rl_reset_prompt ();
+
+  RL_SETSTATE (RL_STATE_VICMDONCE);
+  return (0);
+}
+
+int
+rl_vi_arg_digit (int count, int c)
+{
+  if (c == '0' && rl_numeric_arg == 1 && !rl_explicit_arg)
+    return (rl_beg_of_line (1, c));
+  else
+    return (rl_digit_argument (count, c));
+}
+
+/* Change the case of the next COUNT characters. */
+#if defined (HANDLE_MULTIBYTE)
+static int
+_rl_vi_change_mbchar_case (int count)
+{
+  wchar_t wc;
+  char mb[MB_LEN_MAX+1];
+  int mlen, p;
+  size_t m;
+  mbstate_t ps;
+
+  memset (&ps, 0, sizeof (mbstate_t));
+  if (_rl_adjust_point (rl_line_buffer, rl_point, &ps) > 0)
+    count--;
+  while (count-- && rl_point < rl_end)
+    {
+      m = mbrtowc (&wc, rl_line_buffer + rl_point, rl_end - rl_point, &ps);
+      if (MB_INVALIDCH (m))
+	wc = (wchar_t)rl_line_buffer[rl_point];
+      else if (MB_NULLWCH (m))
+	wc = L'\0';
+      if (iswupper (wc))
+	wc = towlower (wc);
+      else if (iswlower (wc))
+	wc = towupper (wc);
+      else
+	{
+	  /* Just skip over chars neither upper nor lower case */
+	  rl_forward_char (1, 0);
+	  continue;
+	}
+
+      /* Vi is kind of strange here. */
+      if (wc)
+	{
+	  p = rl_point;
+	  mlen = wcrtomb (mb, wc, &ps);
+	  if (mlen >= 0)
+	    mb[mlen] = '\0';
+	  rl_begin_undo_group ();
+	  rl_vi_delete (1, 0);
+	  if (rl_point < p)	/* Did we retreat at EOL? */
+	    _rl_vi_advance_point ();
+	  rl_insert_text (mb);
+	  rl_end_undo_group ();
+	  rl_vi_check ();
+	}
+      else
+	rl_forward_char (1, 0);
+    }
+
+  return 0;
+}
+#endif
+
+int
+rl_vi_change_case (int count, int ignore)
+{
+  int c, p;
+
+  /* Don't try this on an empty line. */
+  if (rl_point >= rl_end)
+    return (0);
+
+  c = 0;
+#if defined (HANDLE_MULTIBYTE)
+  if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+    return (_rl_vi_change_mbchar_case (count));
+#endif
+
+  while (count-- && rl_point < rl_end)
+    {
+      if (_rl_uppercase_p (rl_line_buffer[rl_point]))
+	c = _rl_to_lower (rl_line_buffer[rl_point]);
+      else if (_rl_lowercase_p (rl_line_buffer[rl_point]))
+	c = _rl_to_upper (rl_line_buffer[rl_point]);
+      else
+	{
+	  /* Just skip over characters neither upper nor lower case. */
+	  rl_forward_char (1, c);
+	  continue;
+	}
+
+      /* Vi is kind of strange here. */
+      if (c)
+	{
+	  p = rl_point;
+	  rl_begin_undo_group ();
+	  rl_vi_delete (1, c);
+	  if (rl_point < p)	/* Did we retreat at EOL? */
+	    rl_point++;
+	  _rl_insert_char (1, c);
+	  rl_end_undo_group ();
+	  rl_vi_check ();
+	}
+      else
+	rl_forward_char (1, c);
+    }
+  return (0);
+}
+
+int
+rl_vi_put (int count, int key)
+{
+  if (!_rl_uppercase_p (key) && (rl_point + 1 <= rl_end))
+    rl_point = _rl_find_next_mbchar (rl_line_buffer, rl_point, 1, MB_FIND_NONZERO);
+
+  while (count--)
+    rl_yank (1, key);
+
+  rl_backward_char (1, key);
+  return (0);
+}
+
+/* Move the cursor back one character if you're at the end of the line */
+int
+rl_vi_check (void)
+{
+  if (rl_point && rl_point == rl_end)
+    _rl_vi_backup ();
+  return (0);
+}
+
+/* Move to the character position specified by COUNT */
+int
+rl_vi_column (int count, int key)
+{
+  if (count > rl_end)
+    rl_end_of_line (1, key);
+  else
+    {
+      rl_point = 0;
+      rl_point = _rl_forward_char_internal (count - 1);
+    }
+  return (0);
+}
+
+/* Process C as part of the current numeric argument.  Return -1 if the
+   argument should be aborted, 0 if we should not read any more chars, and
+   1 if we should continue to read chars. */
+static int
+_rl_vi_arg_dispatch (int c)
+{
+  int key;
+
+  key = c;
+  if (c >= 0 && _rl_keymap[c].type == ISFUNC && _rl_keymap[c].function == rl_universal_argument)
+    {
+      rl_numeric_arg *= 4;
+      return 1;
+    }
+
+  c = UNMETA (c);
+
+  if (_rl_digit_p (c))
+    {
+      if (rl_explicit_arg)
+	rl_numeric_arg = (rl_numeric_arg * 10) + _rl_digit_value (c);
+      else
+	rl_numeric_arg = _rl_digit_value (c);
+      rl_explicit_arg = 1;
+      return 1;		/* keep going */
+    }
+  else
+    {
+      rl_clear_message ();
+      rl_stuff_char (key);
+      return 0;		/* done */
+    }
+}
+
+/* A simplified loop for vi. Don't dispatch key at end.
+   Don't recognize minus sign?
+   Should this do rl_save_prompt/rl_restore_prompt? */
+static int
+rl_digit_loop1 (void)
+{
+  int c, r;
+
+  while (1)
+    {
+      if (_rl_arg_overflow ())
+	return 1;
+
+      c = _rl_arg_getchar ();
+
+      r = _rl_vi_arg_dispatch (c);
+      if (r <= 0)
+	break;
+    }
+
+  RL_UNSETSTATE(RL_STATE_NUMERICARG);
+  return (0);
+}
+
+/* This set of functions is basically to handle the commands that take a
+   motion argument while in callback mode: read the command, read the motion
+   command modifier, find the extent of the text to affect, and dispatch the
+   command for execution. */
+static void
+_rl_mvcxt_init (_rl_vimotion_cxt *m, int op, int key)
+{
+  m->op = op;
+  m->state = m->flags = 0;
+  m->ncxt = 0;
+  m->numeric_arg = -1;
+  m->start = rl_point;
+  m->end = rl_end;
+  m->key = key;
+  m->motion = -1;
+}
+
+static _rl_vimotion_cxt *
+_rl_mvcxt_alloc (int op, int key)
+{
+  _rl_vimotion_cxt *m;
+
+  m = xmalloc (sizeof (_rl_vimotion_cxt));
+  _rl_mvcxt_init (m, op, key);
+  return m;
+}
+
+static void
+_rl_mvcxt_dispose (_rl_vimotion_cxt *m)
+{
+  xfree (m);
+}
+
+static int
+rl_domove_motion_callback (_rl_vimotion_cxt *m)
+{
+  int c;
+
+  _rl_vi_last_motion = c = m->motion;
+
+  /* Append a blank character temporarily so that the motion routines
+     work right at the end of the line.  Original value of rl_end is saved
+     as m->end. */
+  rl_extend_line_buffer (rl_end + 1);
+  rl_line_buffer[rl_end++] = ' ';
+  rl_line_buffer[rl_end] = '\0';
+
+  _rl_dispatch (c, _rl_keymap);
+
+#if defined (READLINE_CALLBACKS)
+  if (RL_ISSTATE (RL_STATE_CALLBACK))
+    {
+      /* Messy case where char search can be vi motion command; see rest of
+	 details in callback.c.  vi_char_search and callback_char_search just
+	 set and unset the CHARSEARCH state.  This is where any vi motion
+	 command that needs to set its own state should be handled, with any
+	 corresponding code to manage that state in callback.c */
+      if (RL_ISSTATE (RL_STATE_CHARSEARCH))
+	return 0;
+      else
+	return (_rl_vi_domove_motion_cleanup (c, m));
+    }
+#endif
+
+  return (_rl_vi_domove_motion_cleanup (c, m));
+}
+
+int
+_rl_vi_domove_motion_cleanup (int c, _rl_vimotion_cxt *m)
+{
+  int r;
+
+  /* Remove the blank that we added in rl_domove_motion_callback. */
+  rl_end = m->end;
+  rl_line_buffer[rl_end] = '\0';
+  _rl_fix_point (0);
+
+  /* No change in position means the command failed. */
+  if (rl_mark == rl_point)
+    {
+      /* 'c' and 'C' enter insert mode after the delete even if the motion
+	 didn't delete anything, as long as the motion command is valid. */
+      if (_rl_to_upper (m->key) == 'C' && _rl_vi_motion_command (c))
+	return (vidomove_dispatch (m));
+      RL_UNSETSTATE (RL_STATE_VIMOTION);
+      return (-1);
+    }
+
+  /* rl_vi_f[wW]ord () leaves the cursor on the first character of the next
+     word.  If we are not at the end of the line, and we are on a
+     non-whitespace character, move back one (presumably to whitespace). */
+  if ((_rl_to_upper (c) == 'W') && rl_point < rl_end && rl_point > rl_mark &&
+      !whitespace (rl_line_buffer[rl_point]))
+    rl_point--;		/* XXX */
+
+  /* If cw or cW, back up to the end of a word, so the behaviour of ce
+     or cE is the actual result.  Brute-force, no subtlety. */
+  if (m->key == 'c' && rl_point >= rl_mark && (_rl_to_upper (c) == 'W'))
+    {
+      /* Don't move farther back than where we started. */
+      while (rl_point > rl_mark && whitespace (rl_line_buffer[rl_point]))
+	rl_point--;
+
+      /* Posix.2 says that if cw or cW moves the cursor towards the end of
+	 the line, the character under the cursor should be deleted. */
+      if (rl_point == rl_mark)
+	_rl_vi_advance_point ();
+      else
+	{
+	  /* Move past the end of the word so that the kill doesn't
+	     remove the last letter of the previous word.  Only do this
+	     if we are not at the end of the line. */
+	  if (rl_point >= 0 && rl_point < (rl_end - 1) && !whitespace (rl_line_buffer[rl_point]))
+	    _rl_vi_advance_point ();
+	}
+    }
+
+  if (rl_mark < rl_point)
+    SWAP (rl_point, rl_mark);
+
+#if defined (READLINE_CALLBACKS)
+  if (RL_ISSTATE (RL_STATE_CALLBACK))
+    (*rl_redisplay_function)();		/* make sure motion is displayed */
+#endif
+
+  r = vidomove_dispatch (m);
+
+  return (r);
+}
+
+#define RL_VIMOVENUMARG()	(RL_ISSTATE (RL_STATE_VIMOTION) && RL_ISSTATE (RL_STATE_NUMERICARG))
+
+static int
+rl_domove_read_callback (_rl_vimotion_cxt *m)
+{
+  int c, save;
+
+  c = m->motion;
+
+  if (member (c, vi_motion))
+    {
+#if defined (READLINE_CALLBACKS)
+      /* If we just read a vi-mode motion command numeric argument, turn off
+	 the `reading numeric arg' state */
+      if (RL_ISSTATE (RL_STATE_CALLBACK) && RL_VIMOVENUMARG())
+	RL_UNSETSTATE (RL_STATE_NUMERICARG);
+#endif
+      /* Should do everything, including turning off RL_STATE_VIMOTION */
+      return (rl_domove_motion_callback (m));
+    }
+  else if (m->key == c && (m->key == 'd' || m->key == 'y' || m->key == 'c'))
+    {
+      rl_mark = rl_end;
+      rl_beg_of_line (1, c);
+      _rl_vi_last_motion = c;
+      RL_UNSETSTATE (RL_STATE_VIMOTION);
+      return (vidomove_dispatch (m));
+    }
+#if defined (READLINE_CALLBACKS)
+  /* XXX - these need to handle rl_universal_argument bindings */
+  /* Reading vi motion char continuing numeric argument */
+  else if (_rl_digit_p (c) && RL_ISSTATE (RL_STATE_CALLBACK) && RL_VIMOVENUMARG())
+    {
+      return (_rl_vi_arg_dispatch (c));
+    }
+  /* Readine vi motion char starting numeric argument */
+  else if (_rl_digit_p (c) && RL_ISSTATE (RL_STATE_CALLBACK) && RL_ISSTATE (RL_STATE_VIMOTION) && (RL_ISSTATE (RL_STATE_NUMERICARG) == 0))
+    {
+      RL_SETSTATE (RL_STATE_NUMERICARG);
+      return (_rl_vi_arg_dispatch (c));
+    }
+#endif
+  else if (_rl_digit_p (c))
+    {
+      /* This code path taken when not in callback mode */
+      save = rl_numeric_arg;
+      rl_numeric_arg = _rl_digit_value (c);
+      rl_explicit_arg = 1;
+      RL_SETSTATE (RL_STATE_NUMERICARG);
+      rl_digit_loop1 ();
+      rl_numeric_arg *= save;
+      c = rl_vi_domove_getchar (m);
+      if (c < 0)
+	{
+	  m->motion = 0;
+	  return -1;
+	}
+      m->motion = c;
+      return (rl_domove_motion_callback (m));
+    }
+  else
+    {
+      RL_UNSETSTATE (RL_STATE_VIMOTION);
+      RL_UNSETSTATE (RL_STATE_NUMERICARG);
+      return (1);
+    }
+}
+
+static int
+rl_vi_domove_getchar (_rl_vimotion_cxt *m)
+{
+  return (_rl_bracketed_read_key ());
+}
+
+#if defined (READLINE_CALLBACKS)
+int
+_rl_vi_domove_callback (_rl_vimotion_cxt *m)
+{
+  int c, r;
+
+  m->motion = c = rl_vi_domove_getchar (m);
+  if (c < 0)
+    return 1;		/* EOF */
+  r = rl_domove_read_callback (m);
+
+  return ((r == 0) ? r : 1);	/* normalize return values */
+}
+#endif
+
+/* This code path is taken when not in callback mode. */
+int
+rl_vi_domove (int x, int *ignore)
+{
+  int r;
+  _rl_vimotion_cxt *m;
+
+  m = _rl_vimvcxt;
+  *ignore = m->motion = rl_vi_domove_getchar (m);
+
+  if (m->motion < 0)
+    {
+      m->motion = 0;
+      return -1;
+    }
+
+  return (rl_domove_read_callback (m));
+}
+
+static int
+vi_delete_dispatch (_rl_vimotion_cxt *m)
+{
+  /* These are the motion commands that do not require adjusting the
+     mark. */
+  if (((strchr (" l|h^0bBFT`", m->motion) == 0) && (rl_point >= m->start)) &&
+      (rl_mark < rl_end))
+    INCREMENT_POS (rl_mark);
+
+  rl_kill_text (rl_point, rl_mark);
+  return (0);
+}
+
+int
+rl_vi_delete_to (int count, int key)
+{
+  int c, r;
+
+  if (_rl_vimvcxt)
+    _rl_mvcxt_init (_rl_vimvcxt, VIM_DELETE, key);
+  else
+    _rl_vimvcxt = _rl_mvcxt_alloc (VIM_DELETE, key);
+
+  _rl_vimvcxt->start = rl_point;
+
+  rl_mark = rl_point;
+  if (_rl_uppercase_p (key))
+    {
+      _rl_vimvcxt->motion = '$';
+      r = rl_domove_motion_callback (_rl_vimvcxt);
+    }
+  else if (_rl_vi_redoing && _rl_vi_last_motion != 'd')	/* `dd' is special */
+    {
+      _rl_vimvcxt->motion = _rl_vi_last_motion;
+      r = rl_domove_motion_callback (_rl_vimvcxt);
+    }
+  else if (_rl_vi_redoing)		/* handle redoing `dd' here */
+    {
+      _rl_vimvcxt->motion = _rl_vi_last_motion;
+      rl_mark = rl_end;
+      rl_beg_of_line (1, key);
+      RL_UNSETSTATE (RL_STATE_VIMOTION);
+      r = vidomove_dispatch (_rl_vimvcxt);
+    }
+#if defined (READLINE_CALLBACKS)
+  else if (RL_ISSTATE (RL_STATE_CALLBACK))
+    {
+      RL_SETSTATE (RL_STATE_VIMOTION);
+      return (0);
+    }
+#endif
+  else
+    r = rl_vi_domove (key, &c);
+
+  if (r < 0)
+    {
+      rl_ding ();
+      r = -1;
+    }
+
+  _rl_mvcxt_dispose (_rl_vimvcxt);
+  _rl_vimvcxt = 0;
+
+  return r;
+}
+
+static int
+vi_change_dispatch (_rl_vimotion_cxt *m)
+{
+  /* These are the motion commands that do not require adjusting the
+     mark.  c[wW] are handled by special-case code in rl_vi_domove(),
+     and already leave the mark at the correct location. */
+  if (((strchr (" l|hwW^0bBFT`", m->motion) == 0) && (rl_point >= m->start)) &&
+      (rl_mark < rl_end))
+    INCREMENT_POS (rl_mark);
+
+  /* The cursor never moves with c[wW]. */
+  if ((_rl_to_upper (m->motion) == 'W') && rl_point < m->start)
+    rl_point = m->start;
+
+  if (_rl_vi_redoing)
+    {
+      if (vi_insert_buffer && *vi_insert_buffer)
+	rl_begin_undo_group ();
+      rl_delete_text (rl_point, rl_mark);
+      if (vi_insert_buffer && *vi_insert_buffer)
+	{
+	  rl_insert_text (vi_insert_buffer);
+	  rl_end_undo_group ();
+	}
+    }
+  else
+    {
+      rl_begin_undo_group ();		/* to make the `u' command work */
+      rl_kill_text (rl_point, rl_mark);
+      /* `C' does not save the text inserted for undoing or redoing. */
+      if (_rl_uppercase_p (m->key) == 0)
+	_rl_vi_doing_insert = 1;
+      /* XXX -- TODO -- use m->numericarg? */
+      rl_vi_start_inserting (m->key, rl_numeric_arg, rl_arg_sign);
+    }
+
+  return (0);
+}
+
+int
+rl_vi_change_to (int count, int key)
+{
+  int c, r;
+
+  if (_rl_vimvcxt)
+    _rl_mvcxt_init (_rl_vimvcxt, VIM_CHANGE, key);
+  else
+    _rl_vimvcxt = _rl_mvcxt_alloc (VIM_CHANGE, key);
+  _rl_vimvcxt->start = rl_point;
+
+  rl_mark = rl_point;
+  if (_rl_uppercase_p (key))
+    {
+      _rl_vimvcxt->motion = '$';
+      r = rl_domove_motion_callback (_rl_vimvcxt);
+    }
+  else if (_rl_vi_redoing && _rl_vi_last_motion != 'c')	/* `cc' is special */
+    {
+      _rl_vimvcxt->motion = _rl_vi_last_motion;
+      r = rl_domove_motion_callback (_rl_vimvcxt);
+    }
+  else if (_rl_vi_redoing)		/* handle redoing `cc' here */
+    {
+      _rl_vimvcxt->motion = _rl_vi_last_motion;
+      rl_mark = rl_end;
+      rl_beg_of_line (1, key);
+      RL_UNSETSTATE (RL_STATE_VIMOTION);
+      r = vidomove_dispatch (_rl_vimvcxt);
+    }
+#if defined (READLINE_CALLBACKS)
+  else if (RL_ISSTATE (RL_STATE_CALLBACK))
+    {
+      RL_SETSTATE (RL_STATE_VIMOTION);
+      return (0);
+    }
+#endif
+  else
+    r = rl_vi_domove (key, &c);
+
+  if (r < 0)
+    {
+      rl_ding ();
+      r = -1;	/* normalize return value */
+    }
+
+  _rl_mvcxt_dispose (_rl_vimvcxt);
+  _rl_vimvcxt = 0;
+
+  return r;
+}
+
+static int
+vi_yank_dispatch (_rl_vimotion_cxt *m)
+{
+  /* These are the motion commands that do not require adjusting the
+     mark. */
+  if (((strchr (" l|h^0%bBFT`", m->motion) == 0) && (rl_point >= m->start)) &&
+      (rl_mark < rl_end))
+    INCREMENT_POS (rl_mark);
+
+  rl_begin_undo_group ();
+  rl_kill_text (rl_point, rl_mark);
+  rl_end_undo_group ();
+  rl_do_undo ();
+  rl_point = m->start;
+
+  _rl_fix_point (1);
+
+  return (0);
+}
+
+int
+rl_vi_yank_to (int count, int key)
+{
+  int c, r;
+
+  if (_rl_vimvcxt)
+    _rl_mvcxt_init (_rl_vimvcxt, VIM_YANK, key);
+  else
+    _rl_vimvcxt = _rl_mvcxt_alloc (VIM_YANK, key);
+  _rl_vimvcxt->start = rl_point;
+
+  rl_mark = rl_point;
+  if (_rl_uppercase_p (key))
+    {
+      _rl_vimvcxt->motion = '$';
+      r = rl_domove_motion_callback (_rl_vimvcxt);
+    }
+  else if (_rl_vi_redoing && _rl_vi_last_motion != 'y')	/* `yy' is special */
+    {
+      _rl_vimvcxt->motion = _rl_vi_last_motion;
+      r = rl_domove_motion_callback (_rl_vimvcxt);
+    }
+  else if (_rl_vi_redoing)			/* handle redoing `yy' here */
+    {
+      _rl_vimvcxt->motion = _rl_vi_last_motion;
+      rl_mark = rl_end;
+      rl_beg_of_line (1, key);
+      RL_UNSETSTATE (RL_STATE_VIMOTION);
+      r = vidomove_dispatch (_rl_vimvcxt);
+    }
+#if defined (READLINE_CALLBACKS)
+  else if (RL_ISSTATE (RL_STATE_CALLBACK))
+    {
+      RL_SETSTATE (RL_STATE_VIMOTION);
+      return (0);
+    }
+#endif
+  else
+    r = rl_vi_domove (key, &c);
+
+  if (r < 0)
+    {
+      rl_ding ();
+      r = -1;
+    }
+
+  _rl_mvcxt_dispose (_rl_vimvcxt);
+  _rl_vimvcxt = 0;
+
+  return r;
+}
+
+static int
+vidomove_dispatch (_rl_vimotion_cxt *m)
+{
+  int r;
+
+  switch (m->op)
+    {
+    case VIM_DELETE:
+      r = vi_delete_dispatch (m);
+      break;
+    case VIM_CHANGE:
+      r = vi_change_dispatch (m);
+      break;
+    case VIM_YANK:
+      r = vi_yank_dispatch (m);
+      break;
+    default:
+      _rl_errmsg ("vidomove_dispatch: unknown operator %d", m->op);
+      r = 1;
+      break;
+    }
+
+  RL_UNSETSTATE (RL_STATE_VIMOTION);
+  return r;
+}
+
+int
+rl_vi_rubout (int count, int key)
+{
+  int opoint;
+
+  if (count < 0)
+    return (rl_vi_delete (-count, key));
+
+  if (rl_point == 0)
+    {
+      rl_ding ();
+      return 1;
+    }
+
+  opoint = rl_point;
+  if (count > 1 && MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+    rl_backward_char (count, key);
+  else if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+    rl_point = _rl_find_prev_mbchar (rl_line_buffer, rl_point, MB_FIND_NONZERO);
+  else
+    rl_point -= count;
+
+  if (rl_point < 0)
+    rl_point = 0;
+
+  rl_kill_text (rl_point, opoint);
+  
+  return (0);
+}
+
+int
+rl_vi_delete (int count, int key)
+{
+  int end;
+
+  if (count < 0)
+    return (rl_vi_rubout (-count, key));
+
+  if (rl_end == 0)
+    {
+      rl_ding ();
+      return 1;
+    }
+
+  if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+    end = _rl_find_next_mbchar (rl_line_buffer, rl_point, count, MB_FIND_NONZERO);
+  else
+    end = rl_point + count;
+
+  if (end >= rl_end)
+    end = rl_end;
+
+  rl_kill_text (rl_point, end);
+  
+  if (rl_point > 0 && rl_point == rl_end)
+    rl_backward_char (1, key);
+
+  return (0);
+}
+
+/* This does what Posix specifies vi-mode C-w to do: using whitespace and
+   punctuation characters as the word boundaries. */
+
+#define vi_unix_word_boundary(c)	(whitespace(c) || ispunct(c))
+
+int
+rl_vi_unix_word_rubout (int count, int key)
+{
+  int orig_point;
+
+  if (rl_point == 0)
+    rl_ding ();
+  else
+    {
+      orig_point = rl_point;
+      if (count <= 0)
+	count = 1;
+
+      while (count--)
+	{
+	  /* This isn't quite what ksh93 does but it seems to match what the
+	     Posix description of sh specifies, with a few accommodations
+	     for sequences of whitespace characters between words and at
+	     the end of the line. */
+
+	  /* Skip over whitespace at the end of the line as a special case */
+	  if (rl_point > 0 && (rl_line_buffer[rl_point] == 0) &&
+		whitespace (rl_line_buffer[rl_point - 1]))
+	    while (--rl_point > 0 && whitespace (rl_line_buffer[rl_point]))
+	      ;
+
+	  /* If we're at the start of a word, move back to word boundary so we
+	     move back to the `preceding' word */
+	  if (rl_point > 0 && (vi_unix_word_boundary (rl_line_buffer[rl_point]) == 0) &&
+		vi_unix_word_boundary (rl_line_buffer[rl_point - 1]))
+	    rl_point--;
+
+	  /* If we are at a word boundary (whitespace/punct), move backward
+	     past a sequence of word boundary characters.  If we are at the
+	     end of a word (non-word boundary), move back to a word boundary */
+	  if (rl_point > 0 && vi_unix_word_boundary (rl_line_buffer[rl_point]))
+	    while (rl_point && vi_unix_word_boundary (rl_line_buffer[rl_point - 1]))
+	      rl_point--;
+	  else if (rl_point > 0 && vi_unix_word_boundary (rl_line_buffer[rl_point]) == 0)
+	    while (rl_point > 0 && (vi_unix_word_boundary (rl_line_buffer[rl_point - 1]) == 0))
+	      _rl_vi_backup_point ();
+	}
+
+      rl_kill_text (orig_point, rl_point);
+    }
+
+  return 0;
+}
+
+
+int
+rl_vi_back_to_indent (int count, int key)
+{
+  rl_beg_of_line (1, key);
+  while (rl_point < rl_end && whitespace (rl_line_buffer[rl_point]))
+    rl_point++;
+  return (0);
+}
+
+int
+rl_vi_first_print (int count, int key)
+{
+  return (rl_vi_back_to_indent (1, key));
+}
+
+static int _rl_cs_dir, _rl_cs_orig_dir;
+
+#if defined (READLINE_CALLBACKS)
+static int
+_rl_vi_callback_char_search (_rl_callback_generic_arg *data)
+{
+  int c;
+#if defined (HANDLE_MULTIBYTE)
+  c = _rl_vi_last_search_mblen = _rl_read_mbchar (_rl_vi_last_search_mbchar, MB_LEN_MAX);
+#else
+  RL_SETSTATE(RL_STATE_MOREINPUT);
+  c = rl_read_key ();
+  RL_UNSETSTATE(RL_STATE_MOREINPUT);
+#endif
+
+  if (c <= 0)
+    {
+      RL_UNSETSTATE (RL_STATE_CHARSEARCH);
+      return -1;
+    }
+
+#if !defined (HANDLE_MULTIBYTE)
+  _rl_vi_last_search_char = c;
+#endif
+
+  _rl_callback_func = 0;
+  _rl_want_redisplay = 1;
+  RL_UNSETSTATE (RL_STATE_CHARSEARCH);
+
+#if defined (HANDLE_MULTIBYTE)
+  return (_rl_char_search_internal (data->count, _rl_cs_dir, _rl_vi_last_search_mbchar, _rl_vi_last_search_mblen));
+#else
+  return (_rl_char_search_internal (data->count, _rl_cs_dir, _rl_vi_last_search_char));
+#endif  
+}
+#endif
+
+int
+rl_vi_char_search (int count, int key)
+{
+  int c;
+#if defined (HANDLE_MULTIBYTE)
+  static char *target;
+  static int tlen;
+#else
+  static char target;
+#endif
+
+  if (key == ';' || key == ',')
+    {
+      if (_rl_cs_orig_dir == 0)
+	return 1;
+#if defined (HANDLE_MULTIBYTE)
+      if (_rl_vi_last_search_mblen == 0)
+	return 1;
+#else
+      if (_rl_vi_last_search_char == 0)
+	return 1;
+#endif
+      _rl_cs_dir = (key == ';') ? _rl_cs_orig_dir : -_rl_cs_orig_dir;
+    }
+  else
+    {
+      switch (key)
+	{
+	case 't':
+	  _rl_cs_orig_dir = _rl_cs_dir = FTO;
+	  break;
+
+	case 'T':
+	  _rl_cs_orig_dir = _rl_cs_dir = BTO;
+	  break;
+
+	case 'f':
+	  _rl_cs_orig_dir = _rl_cs_dir = FFIND;
+	  break;
+
+	case 'F':
+	  _rl_cs_orig_dir = _rl_cs_dir = BFIND;
+	  break;
+	}
+
+      if (_rl_vi_redoing)
+	{
+	  /* set target and tlen below */
+	}
+#if defined (READLINE_CALLBACKS)
+      else if (RL_ISSTATE (RL_STATE_CALLBACK))
+	{
+	  _rl_callback_data = _rl_callback_data_alloc (count);
+	  _rl_callback_data->i1 = _rl_cs_dir;
+	  _rl_callback_data->i2 = key;
+	  _rl_callback_func = _rl_vi_callback_char_search;
+	  RL_SETSTATE (RL_STATE_CHARSEARCH);
+	  return (0);
+	}
+#endif
+      else
+	{
+#if defined (HANDLE_MULTIBYTE)
+	  c = _rl_read_mbchar (_rl_vi_last_search_mbchar, MB_LEN_MAX);
+	  if (c <= 0)
+	    return -1;
+	  _rl_vi_last_search_mblen = c;
+#else
+	  RL_SETSTATE(RL_STATE_MOREINPUT);
+	  c = rl_read_key ();
+	  RL_UNSETSTATE(RL_STATE_MOREINPUT);
+	  if (c < 0)
+	    return -1;
+	  _rl_vi_last_search_char = c;
+#endif
+	}
+    }
+
+#if defined (HANDLE_MULTIBYTE)
+  target = _rl_vi_last_search_mbchar;
+  tlen = _rl_vi_last_search_mblen;
+#else
+  target = _rl_vi_last_search_char;
+#endif
+
+#if defined (HANDLE_MULTIBYTE)
+  return (_rl_char_search_internal (count, _rl_cs_dir, target, tlen));
+#else
+  return (_rl_char_search_internal (count, _rl_cs_dir, target));
+#endif
+}
+
+/* Match brackets */
+int
+rl_vi_match (int ignore, int key)
+{
+  int count = 1, brack, pos, tmp, pre;
+
+  pos = rl_point;
+  if ((brack = rl_vi_bracktype (rl_line_buffer[rl_point])) == 0)
+    {
+      if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+	{
+	  while ((brack = rl_vi_bracktype (rl_line_buffer[rl_point])) == 0)
+	    {
+	      pre = rl_point;
+	      rl_forward_char (1, key);
+	      if (pre == rl_point)
+		break;
+	    }
+	}
+      else
+	while ((brack = rl_vi_bracktype (rl_line_buffer[rl_point])) == 0 &&
+		rl_point < rl_end - 1)
+	  rl_forward_char (1, key);
+
+      if (brack <= 0)
+	{
+	  rl_point = pos;
+	  rl_ding ();
+	  return 1;
+	}
+    }
+
+  pos = rl_point;
+
+  if (brack < 0)
+    {
+      while (count)
+	{
+	  tmp = pos;
+	  if (MB_CUR_MAX == 1 || rl_byte_oriented)
+	    pos--;
+	  else
+	    {
+	      pos = _rl_find_prev_mbchar (rl_line_buffer, pos, MB_FIND_ANY);
+	      if (tmp == pos)
+		pos--;
+	    }
+	  if (pos >= 0)
+	    {
+	      int b = rl_vi_bracktype (rl_line_buffer[pos]);
+	      if (b == -brack)
+		count--;
+	      else if (b == brack)
+		count++;
+	    }
+	  else
+	    {
+	      rl_ding ();
+	      return 1;
+	    }
+	}
+    }
+  else
+    {			/* brack > 0 */
+      while (count)
+	{
+	  if (MB_CUR_MAX == 1 || rl_byte_oriented)
+	    pos++;
+	  else
+	    pos = _rl_find_next_mbchar (rl_line_buffer, pos, 1, MB_FIND_ANY);
+
+	  if (pos < rl_end)
+	    {
+	      int b = rl_vi_bracktype (rl_line_buffer[pos]);
+	      if (b == -brack)
+		count--;
+	      else if (b == brack)
+		count++;
+	    }
+	  else
+	    {
+	      rl_ding ();
+	      return 1;
+	    }
+	}
+    }
+  rl_point = pos;
+  return (0);
+}
+
+int
+rl_vi_bracktype (int c)
+{
+  switch (c)
+    {
+    case '(': return  1;
+    case ')': return -1;
+    case '[': return  2;
+    case ']': return -2;
+    case '{': return  3;
+    case '}': return -3;
+    default:  return  0;
+    }
+}
+
+static int
+_rl_vi_change_char (int count, int c, char *mb)
+{
+  int p;
+
+  if (c == '\033' || c == CTRL ('C'))
+    return -1;
+
+  rl_begin_undo_group ();
+  while (count-- && rl_point < rl_end)
+    {
+      p = rl_point;
+      rl_vi_delete (1, c);
+      if (rl_point < p)		/* Did we retreat at EOL? */
+	_rl_vi_append_forward (c);
+#if defined (HANDLE_MULTIBYTE)
+      if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+	rl_insert_text (mb);
+      else
+#endif
+	_rl_insert_char (1, c);
+    }
+
+  /* The cursor shall be left on the last character changed. */
+  rl_backward_char (1, c);
+
+  rl_end_undo_group ();
+
+  return (0);
+}
+
+static int
+_rl_vi_callback_getchar (char *mb, int mlen)
+{
+  return (_rl_bracketed_read_mbstring (mb, mlen));
+}
+
+#if defined (READLINE_CALLBACKS)
+static int
+_rl_vi_callback_change_char (_rl_callback_generic_arg *data)
+{
+  int c;
+  char mb[MB_LEN_MAX+1];
+
+  c = _rl_vi_callback_getchar (mb, MB_LEN_MAX);
+#if defined (HANDLE_MULTIBYTE)
+  if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+    strncpy (_rl_vi_last_replacement, mb, MB_LEN_MAX);
+  else
+#endif
+    _rl_vi_last_replacement[0] = c;
+  _rl_vi_last_replacement[MB_LEN_MAX] = '\0';	/* XXX */
+
+  if (c < 0)
+    return -1;
+
+  _rl_callback_func = 0;
+  _rl_want_redisplay = 1;
+
+  return (_rl_vi_change_char (data->count, c, mb));
+}
+#endif
+
+int
+rl_vi_change_char (int count, int key)
+{
+  int c;
+  char mb[MB_LEN_MAX+1];
+
+  if (_rl_vi_redoing)
+    {
+      strncpy (mb, _rl_vi_last_replacement, MB_LEN_MAX);
+      c = (unsigned char)_rl_vi_last_replacement[0];	/* XXX */
+      mb[MB_LEN_MAX] = '\0';
+    }
+#if defined (READLINE_CALLBACKS)
+  else if (RL_ISSTATE (RL_STATE_CALLBACK))
+    {
+      _rl_callback_data = _rl_callback_data_alloc (count);
+      _rl_callback_func = _rl_vi_callback_change_char;
+      return (0);
+    }
+#endif
+  else
+    {
+      c = _rl_vi_callback_getchar (mb, MB_LEN_MAX);
+#ifdef HANDLE_MULTIBYTE
+      if (MB_CUR_MAX > 1 && rl_byte_oriented == 0)
+	strncpy (_rl_vi_last_replacement, mb, MB_LEN_MAX);
+      else
+#endif
+	_rl_vi_last_replacement[0] = c;
+      _rl_vi_last_replacement[MB_LEN_MAX] = '\0';	/* just in case */      
+    }
+
+  if (c < 0)
+    return -1;
+
+  return (_rl_vi_change_char (count, c, mb));
+}
+
+int
+rl_vi_subst (int count, int key)
+{
+  /* If we are redoing, rl_vi_change_to will stuff the last motion char */
+  if (_rl_vi_redoing == 0)
+    rl_stuff_char ((key == 'S') ? 'c' : 'l');	/* `S' == `cc', `s' == `cl' */
+
+  return (rl_vi_change_to (count, 'c'));
+}
+
+int
+rl_vi_overstrike (int count, int key)
+{
+  if (_rl_vi_doing_insert == 0)
+    {
+      _rl_vi_doing_insert = 1;
+      rl_begin_undo_group ();
+    }
+
+  if (count > 0)
+    {
+      _rl_overwrite_char (count, key);
+      vi_replace_count += count;
+    }
+
+  return (0);
+}
+
+int
+rl_vi_overstrike_delete (int count, int key)
+{
+  int i, s;
+
+  for (i = 0; i < count; i++)
+    {
+      if (vi_replace_count == 0)
+	{
+	  rl_ding ();
+	  break;
+	}
+      s = rl_point;
+
+      if (rl_do_undo ())
+	vi_replace_count--;		/* XXX */
+
+      if (rl_point == s)
+	rl_backward_char (1, key);
+    }
+
+  if (vi_replace_count == 0 && _rl_vi_doing_insert)
+    {
+      rl_end_undo_group ();
+      rl_do_undo ();
+      _rl_vi_doing_insert = 0;
+    }
+  return (0);
+}
+
+static int
+rl_vi_overstrike_kill_line (int count, int key)
+{
+  int r, end;
+
+  end = rl_end;
+  r = rl_unix_line_discard (count, key);
+  vi_replace_count -= end - rl_end;
+  return r;
+}
+
+static int
+rl_vi_overstrike_kill_word (int count, int key)
+{
+  int r, end;
+
+  end = rl_end;
+  r = rl_vi_unix_word_rubout (count, key);
+  vi_replace_count -= end - rl_end;
+  return r;
+}
+
+static int
+rl_vi_overstrike_yank (int count, int key)
+{
+  int r, end;
+
+  end = rl_end;
+  r = rl_yank (count, key);
+  vi_replace_count += rl_end - end;
+  return r;
+}
+
+/* Read bracketed paste mode pasted text and insert it in overwrite mode */
+static int
+rl_vi_overstrike_bracketed_paste (int count, int key)
+{
+  int r;
+  char *pbuf;
+  size_t pblen;
+
+  pbuf = _rl_bracketed_text (&pblen);
+  if (pblen == 0)
+    {
+      xfree (pbuf);
+      return 0;
+    }
+  r = pblen;
+  while (--r >= 0)
+    _rl_unget_char ((unsigned char)pbuf[r]);
+  xfree (pbuf);
+
+  while (_rl_pushed_input_available ())
+    {
+      key = rl_read_key ();
+      r = rl_vi_overstrike (1, key);
+    }
+
+  return r;
+}
+
+int
+rl_vi_replace (int count, int key)
+{
+  int i;
+
+  vi_replace_count = 0;
+
+  if (vi_replace_map == 0)
+    {
+      vi_replace_map = rl_make_bare_keymap ();
+
+      for (i = 0; i < ' '; i++)
+	if (vi_insertion_keymap[i].type == ISFUNC)
+	  vi_replace_map[i].function = vi_insertion_keymap[i].function;
+
+      for (i = ' '; i < KEYMAP_SIZE; i++)
+	vi_replace_map[i].function = rl_vi_overstrike;
+
+      vi_replace_map[RUBOUT].function = rl_vi_overstrike_delete;
+
+      /* Make sure these are what we want. */
+      vi_replace_map[ESC].function = rl_vi_movement_mode;
+      vi_replace_map[RETURN].function = rl_newline;
+      vi_replace_map[NEWLINE].function = rl_newline;
+
+      /* If the normal vi insertion keymap has ^H bound to erase, do the
+	 same here.  Probably should remove the assignment to RUBOUT up
+	 there, but I don't think it will make a difference in real life. */
+      if (vi_insertion_keymap[CTRL ('H')].type == ISFUNC &&
+	  vi_insertion_keymap[CTRL ('H')].function == rl_rubout)
+	vi_replace_map[CTRL ('H')].function = rl_vi_overstrike_delete;
+
+      /* Same for ^U and unix-line-discard. */
+      if (vi_insertion_keymap[CTRL ('U')].type == ISFUNC &&
+	  vi_insertion_keymap[CTRL ('U')].function == rl_unix_line_discard)
+	vi_replace_map[CTRL ('U')].function = rl_vi_overstrike_kill_line;
+
+      /* And for ^W and unix-word-rubout. */
+      if (vi_insertion_keymap[CTRL ('W')].type == ISFUNC &&
+	  vi_insertion_keymap[CTRL ('W')].function == rl_vi_unix_word_rubout)
+	vi_replace_map[CTRL ('W')].function = rl_vi_overstrike_kill_word;
+
+      /* And finally for ^Y and yank. */
+      if (vi_insertion_keymap[CTRL ('Y')].type == ISFUNC &&
+	  vi_insertion_keymap[CTRL ('Y')].function == rl_yank)
+	vi_replace_map[CTRL ('Y')].function = rl_vi_overstrike_yank;
+
+      /* Make sure this is the value we need. */
+      vi_replace_map[ANYOTHERKEY].type = ISFUNC;
+      vi_replace_map[ANYOTHERKEY].function = (rl_command_func_t *)NULL;
+    }
+
+  rl_vi_start_inserting (key, 1, rl_arg_sign);
+
+  _rl_vi_last_key_before_insert = 'R';	/* in case someone rebinds it */
+  _rl_keymap = vi_replace_map;
+
+  if (_rl_enable_bracketed_paste)
+    rl_bind_keyseq_if_unbound (BRACK_PASTE_PREF, rl_vi_overstrike_bracketed_paste);
+
+  return (0);
+}
+
+#if 0
+/* Try to complete the word we are standing on or the word that ends with
+   the previous character.  A space matches everything.  Word delimiters are
+   space and ;. */
+int
+rl_vi_possible_completions (void)
+{
+  int save_pos = rl_point;
+
+  if (rl_line_buffer[rl_point] != ' ' && rl_line_buffer[rl_point] != ';')
+    {
+      while (rl_point < rl_end && rl_line_buffer[rl_point] != ' ' &&
+	     rl_line_buffer[rl_point] != ';')
+	_rl_vi_advance_point ();
+    }
+  else if (rl_line_buffer[rl_point - 1] == ';')
+    {
+      rl_ding ();
+      return (0);
+    }
+
+  rl_possible_completions ();
+  rl_point = save_pos;
+
+  return (0);
+}
+#endif
+
+/* Functions to save and restore marks. */
+static int
+_rl_vi_set_mark (void)
+{
+  int ch;
+
+  RL_SETSTATE(RL_STATE_MOREINPUT);
+  ch = rl_read_key ();
+  RL_UNSETSTATE(RL_STATE_MOREINPUT);
+
+  if (ch < 0 || ch < 'a' || ch > 'z')	/* make test against 0 explicit */
+    {
+      rl_ding ();
+      return 1;
+    }
+  ch -= 'a';
+  vi_mark_chars[ch] = rl_point;
+  return 0;
+}
+
+#if defined (READLINE_CALLBACKS)
+static int
+_rl_vi_callback_set_mark (_rl_callback_generic_arg *data)
+{
+  _rl_callback_func = 0;
+  _rl_want_redisplay = 1;
+
+  return (_rl_vi_set_mark ());
+}
+#endif
+
+int
+rl_vi_set_mark (int count, int key)
+{
+#if defined (READLINE_CALLBACKS)
+  if (RL_ISSTATE (RL_STATE_CALLBACK))
+    {
+      _rl_callback_data = 0;
+      _rl_callback_func = _rl_vi_callback_set_mark;
+      return (0);
+    }
+#endif
+
+  return (_rl_vi_set_mark ());
+}
+
+static int
+_rl_vi_goto_mark (void)
+{
+  int ch;
+
+  RL_SETSTATE(RL_STATE_MOREINPUT);
+  ch = rl_read_key ();
+  RL_UNSETSTATE(RL_STATE_MOREINPUT);
+
+  if (ch == '`')
+    {
+      rl_point = rl_mark;
+      _rl_fix_point (1);
+      return 0;
+    }
+  else if (ch < 0 || ch < 'a' || ch > 'z')	/* make test against 0 explicit */
+    {
+      rl_ding ();
+      return 1;
+    }
+
+  ch -= 'a';
+  if (vi_mark_chars[ch] == -1)
+    {
+      rl_ding ();
+      return 1;
+    }
+  rl_point = vi_mark_chars[ch];
+  _rl_fix_point (1);
+  return 0;
+}
+
+#if defined (READLINE_CALLBACKS)
+static int
+_rl_vi_callback_goto_mark (_rl_callback_generic_arg *data)
+{
+  _rl_callback_func = 0;
+  _rl_want_redisplay = 1;
+
+  return (_rl_vi_goto_mark ());
+}
+#endif
+
+int
+rl_vi_goto_mark (int count, int key)
+{
+#if defined (READLINE_CALLBACKS)
+  if (RL_ISSTATE (RL_STATE_CALLBACK))
+    {
+      _rl_callback_data = 0;
+      _rl_callback_func = _rl_vi_callback_goto_mark;
+      return (0);
+    }
+#endif
+
+  return (_rl_vi_goto_mark ());
+}
+#endif /* VI_MODE */
diff --git a/lib/readline/xfree.c b/lib/readline/xfree.c
new file mode 100644
index 0000000..c199b29
--- /dev/null
+++ b/lib/readline/xfree.c
@@ -0,0 +1,49 @@
+/* xfree.c -- safe version of free that ignores attempts to free NUL */
+
+/* Copyright (C) 1991-2010,2017 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#if defined (HAVE_CONFIG_H)
+#include <config.h>
+#endif
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#include "xmalloc.h"
+
+/* **************************************************************** */
+/*								    */
+/*		   Memory Deallocation.				    */
+/*								    */
+/* **************************************************************** */
+
+/* Use this as the function to call when adding unwind protects so we
+   don't need to know what free() returns. */
+void
+xfree (PTR_T string)
+{
+  if (string)
+    free (string);
+}
diff --git a/lib/readline/xmalloc.c b/lib/readline/xmalloc.c
new file mode 100644
index 0000000..5d01d75
--- /dev/null
+++ b/lib/readline/xmalloc.c
@@ -0,0 +1,75 @@
+/* xmalloc.c -- safe versions of malloc and realloc */
+
+/* Copyright (C) 1991-2017 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define READLINE_LIBRARY
+
+#if defined (HAVE_CONFIG_H)
+#include <config.h>
+#endif
+
+#include <stdio.h>
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#include "xmalloc.h"
+
+/* **************************************************************** */
+/*								    */
+/*		   Memory Allocation and Deallocation.		    */
+/*								    */
+/* **************************************************************** */
+
+static void
+memory_error_and_abort (char *fname)
+{
+  fprintf (stderr, "%s: out of virtual memory\n", fname);
+  exit (2);
+}
+
+/* Return a pointer to free()able block of memory large enough
+   to hold BYTES number of bytes.  If the memory cannot be allocated,
+   print an error message and abort. */
+PTR_T
+xmalloc (size_t bytes)
+{
+  PTR_T temp;
+
+  temp = malloc (bytes);
+  if (temp == 0)
+    memory_error_and_abort ("xmalloc");
+  return (temp);
+}
+
+PTR_T
+xrealloc (PTR_T pointer, size_t bytes)
+{
+  PTR_T temp;
+
+  temp = pointer ? realloc (pointer, bytes) : malloc (bytes);
+
+  if (temp == 0)
+    memory_error_and_abort ("xrealloc");
+  return (temp);
+}
diff --git a/lib/readline/xmalloc.h b/lib/readline/xmalloc.h
new file mode 100644
index 0000000..f40d7a5
--- /dev/null
+++ b/lib/readline/xmalloc.h
@@ -0,0 +1,45 @@
+/* xmalloc.h -- memory allocation that aborts on errors. */
+
+/* Copyright (C) 1999-2009 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.      
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_XMALLOC_H_)
+#define _XMALLOC_H_
+
+#if defined (READLINE_LIBRARY)
+#  include "rlstdc.h"
+#else
+#  include <readline/rlstdc.h>
+#endif
+
+#ifndef PTR_T
+
+#ifdef __STDC__
+#  define PTR_T	void *
+#else
+#  define PTR_T	char *
+#endif
+
+#endif /* !PTR_T */
+
+extern PTR_T xmalloc PARAMS((size_t));
+extern PTR_T xrealloc PARAMS((void *, size_t));
+extern void xfree PARAMS((void *));
+
+#endif /* _XMALLOC_H_ */
diff --git a/lib/sh/Makefile.in b/lib/sh/Makefile.in
new file mode 100644
index 0000000..98064de
--- /dev/null
+++ b/lib/sh/Makefile.in
@@ -0,0 +1,639 @@
+#
+# Makefile for the Bash library
+#
+#
+# Copyright (C) 1998-2020 Free Software Foundation, Inc.
+
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+PACKAGE = @PACKAGE_NAME@
+VERSION = @PACKAGE_VERSION@
+
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+
+srcdir = @srcdir@
+VPATH = @srcdir@
+topdir = @top_srcdir@
+BUILD_DIR = @BUILD_DIR@
+
+LIBBUILD = ${BUILD_DIR}/lib
+
+BASHINCDIR = ${topdir}/include
+
+INTL_LIBSRC = ${topdir}/lib/intl
+INTL_BUILDDIR = ${LIBBUILD}/intl
+INTL_INC = @INTL_INC@
+LIBINTL_H = @LIBINTL_H@
+
+datarootdir = @datarootdir@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+
+CC = @CC@
+RANLIB = @RANLIB@
+AR = @AR@
+ARFLAGS = @ARFLAGS@
+RM = rm -f
+CP = cp
+MV = mv
+
+SHELL = @MAKE_SHELL@
+
+CFLAGS = @CFLAGS@
+LOCAL_CFLAGS = @LOCAL_CFLAGS@ ${DEBUG}
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@ @LOCAL_LDFLAGS@
+
+PROFILE_FLAGS = @PROFILE_FLAGS@
+
+DEFS = @DEFS@
+LOCAL_DEFS = @LOCAL_DEFS@
+
+INCLUDES = -I. -I../.. -I$(topdir) -I$(topdir)/lib -I$(BASHINCDIR) -I$(srcdir) $(INTL_INC)
+
+CCFLAGS = ${ADDON_CFLAGS} ${PROFILE_FLAGS} ${INCLUDES} $(DEFS) $(LOCAL_DEFS) \
+	  $(LOCAL_CFLAGS) $(CFLAGS) $(CPPFLAGS) 
+
+GCC_LINT_FLAGS = -Wall -Wshadow -Wpointer-arith -Wcast-qual \
+		 -Wcast-align -Wstrict-prototypes -Wconversion \
+		 -Wmissing-prototypes -Wtraditional -Wredundant-decls -pedantic
+
+.c.o:
+	$(CC) -c $(CCFLAGS) $<
+
+# The name of the library target.
+LIBRARY_NAME = libsh.a
+
+# The C code source files for this library.
+CSOURCES = clktck.c clock.c getcwd.c getenv.c oslib.c setlinebuf.c \
+	   strcasecmp.c strerror.c strtod.c strtol.c strtoul.c \
+	   vprint.c itos.c rename.c zread.c zwrite.c shtty.c \
+	   inet_aton.c netconn.c netopen.c strpbrk.c timeval.c makepath.c \
+	   pathcanon.c pathphys.c tmpfile.c stringlist.c stringvec.c spell.c \
+	   shquote.c strtrans.c strcasestr.c snprintf.c mailstat.c \
+	   fmtulong.c fmtullong.c fmtumax.c shmatch.c strnlen.c \
+	   strtoll.c strtoull.c strtoimax.c strtoumax.c memset.c strstr.c \
+	   mktime.c strftime.c mbschr.c zcatfd.c zmapfd.c winsize.c eaccess.c \
+	   wcsdup.c fpurge.c zgetline.c mbscmp.c uconvert.c ufuncs.c \
+	   casemod.c dprintf.c input_avail.c mbscasecmp.c fnxform.c \
+	   strchrnul.c unicode.c wcswidth.c wcsnwidth.c shmbchar.c strdup.c \
+	   utf8.c random.c gettimeofday.c
+
+# The header files for this library.
+HSOURCES = 
+
+# The object files contained in $(LIBRARY_NAME)
+LIBOBJS = @LIBOBJS@
+OBJECTS = clktck.o clock.o getenv.o oslib.o setlinebuf.o strnlen.o \
+	  itos.o zread.o zwrite.o shtty.o shmatch.o eaccess.o \
+	  netconn.o netopen.o timeval.o makepath.o pathcanon.o \
+	  pathphys.o tmpfile.o stringlist.o stringvec.o spell.o shquote.o \
+	  strtrans.o snprintf.o mailstat.o fmtulong.o \
+	  fmtullong.o fmtumax.o zcatfd.o zmapfd.o winsize.o wcsdup.o \
+	  fpurge.o zgetline.o mbscmp.o uconvert.o ufuncs.o casemod.o \
+	  input_avail.o mbscasecmp.o fnxform.o unicode.o shmbchar.o \
+	  utf8.o random.o gettimeofday.o wcsnwidth.o ${LIBOBJS}
+
+SUPPORT = Makefile
+
+all: $(LIBRARY_NAME)
+
+$(LIBRARY_NAME): $(OBJECTS)
+	$(RM) $@
+	$(AR) $(ARFLAGS) $@ $(OBJECTS)
+	-test -n "$(RANLIB)" && $(RANLIB) $@
+
+force:
+
+# The rule for 'includes' is written funny so that the if statement
+# always returns TRUE unless there really was an error installing the
+# include files.
+install:
+
+clean:
+	$(RM) $(OBJECTS) $(LIBRARY_NAME)
+
+realclean distclean maintainer-clean: clean
+	$(RM) Makefile
+
+mostlyclean: clean
+
+# Dependencies
+
+${BUILD_DIR}/version.h: ${BUILD_DIR}/config.h ${BUILD_DIR}/Makefile Makefile
+	-( cd ${BUILD_DIR} && ${MAKE} ${MFLAGS} version.h )
+
+${BUILD_DIR}/pathnames.h: ${BUILD_DIR}/config.h ${BUILD_DIR}/Makefile Makefile
+	-( cd ${BUILD_DIR} && ${MAKE} ${MFLAGS} pathnames.h )
+
+# rules for losing makes, like SunOS
+casemod.o: casemod.c
+clktck.o: clktck.c
+clock.o: clock.c
+eaccess.o: eaccess.c
+dprintf.o: dprintf.c
+fmtullong.o: fmtullong.c
+fmtulong.o: fmtulong.c
+fmtumax.o: fmtumax.c
+fnxform.o: fnxform.c
+fpurge.o: fpurge.c
+getcwd.o: getcwd.c
+getenv.o: getenv.c
+gettimeofday.o: gettimeofday.c
+inet_aton.o: inet_aton.c
+input_avail.o: input_avail.c
+itos.o: itos.c
+mailstat.o: mailstat.c
+makepath.o: makepath.c
+mbscasecmp.o: mbscasecmp.c
+mbschr.o: mbschr.c
+mbscmp.o: mbscmp.c
+memset.o: memset.c
+mktime.o: mktime.c
+netconn.o: netconn.c
+netopen.o: netopen.c
+oslib.o: oslib.c
+pathcanon.o: pathcanon.c
+pathphys.o: pathphys.c
+random.o: random.c
+rename.o: rename.c
+setlinebuf.o: setlinebuf.c
+shmatch.o: shmatch.c
+shmbchar.o: shmbchar.c
+shquote.o: shquote.c
+shtty.o: shtty.c
+snprintf.o: snprintf.c
+spell.o: spell.c
+strcasecmp.o: strcasecmp.c
+strchrnul.o: strchrnul.c
+strerror.o: strerror.c
+strftime.o: strftime.c
+strcasestr.o: strcasestr.c
+stringlist.o: stringlist.c
+stringvec.o: stringvec.c
+strnlen.o: strnlen.c
+strpbrk.o: strpbrk.c
+strtod.o: strtod.c
+strtoimax.o: strtoimax.c
+strtol.o: strtol.c
+strtoll.o: strtoll.c
+strtoul.o: strtoul.c
+strtoull.o: strtoull.c
+strtoumax.o: strtoumax.c
+strtrans.o: strtrans.c
+times.o: times.c
+timeval.o: timeval.c
+tmpfile.o: tmpfile.c
+uconvert.o: uconvert.c
+ufuncs.o: ufuncs.c
+unicode.o: unicode.c
+utf8.o: utf8.c
+vprint.o: vprint.c
+wcsdup.o: wcsdup.c
+wcsnwidth.o: wcsnwidth.c
+wcswidth.o: wcswidth.c
+winsize.o: winsize.c
+zcatfd.o: zcatfd.c
+zmapfd.o: zmapfd.c
+zgetline.o: zgetline.c
+zread.o: zread.c
+zwrite.o: zwrite.c
+
+# dependencies for c files that include other c files
+fmtullong.o: fmtulong.c
+fmtumax.o: fmtulong.c
+strtoll.o: strtol.c
+strtoul.o: strtol.c
+strtoull.o: strtol.c
+
+# all files in the library depend on config.h
+casemod.o: ${BUILD_DIR}/config.h
+clktck.o: ${BUILD_DIR}/config.h
+clock.o: ${BUILD_DIR}/config.h
+eaccess.o: ${BUILD_DIR}/config.h
+dprintf.o: ${BUILD_DIR}/config.h
+fmtullong.o: ${BUILD_DIR}/config.h
+fmtulong.o: ${BUILD_DIR}/config.h
+fmtumax.o: ${BUILD_DIR}/config.h
+fnxform.o: ${BUILD_DIR}/config.h
+fpurge.o: ${BUILD_DIR}/config.h
+getcwd.o: ${BUILD_DIR}/config.h
+getenv.o: ${BUILD_DIR}/config.h
+gettimeofday.o: ${BUILD_DIR}/config.h
+inet_aton.o: ${BUILD_DIR}/config.h
+input_avail.o: ${BUILD_DIR}/config.h
+itos.o: ${BUILD_DIR}/config.h
+mailstat.o: ${BUILD_DIR}/config.h
+makepath.o: ${BUILD_DIR}/config.h
+mbscasecmp.o: ${BUILD_DIR}/config.h
+mbschr.o: ${BUILD_DIR}/config.h
+mbscmp.o: ${BUILD_DIR}/config.h
+memset.o: ${BUILD_DIR}/config.h
+mktime.o: ${BUILD_DIR}/config.h
+netconn.o: ${BUILD_DIR}/config.h
+netopen.o: ${BUILD_DIR}/config.h
+oslib.o: ${BUILD_DIR}/config.h
+pathcanon.o: ${BUILD_DIR}/config.h
+pathphys.o: ${BUILD_DIR}/config.h
+random.o: ${BUILD_DIR}/config.h
+rename.o: ${BUILD_DIR}/config.h
+setlinebuf.o: ${BUILD_DIR}/config.h
+shmatch.o: ${BUILD_DIR}/config.h
+shmbchar.o: ${BUILD_DIR}/config.h
+shquote.o: ${BUILD_DIR}/config.h
+shtty.o: ${BUILD_DIR}/config.h
+snprintf.o: ${BUILD_DIR}/config.h
+spell.o: ${BUILD_DIR}/config.h
+strcasecmp.o: ${BUILD_DIR}/config.h
+strchrnul.o: ${BUILD_DIR}/config.h
+strerror.o: ${BUILD_DIR}/config.h
+strftime.o: ${BUILD_DIR}/config.h
+strcasestr.o: ${BUILD_DIR}/config.h
+stringlist.o: ${BUILD_DIR}/config.h
+stringvec.o: ${BUILD_DIR}/config.h
+strnlen.o: ${BUILD_DIR}/config.h
+strpbrk.o: ${BUILD_DIR}/config.h
+strtod.o: ${BUILD_DIR}/config.h
+strtoimax.o: ${BUILD_DIR}/config.h
+strtol.o: ${BUILD_DIR}/config.h
+strtoll.o: ${BUILD_DIR}/config.h
+strtoul.o: ${BUILD_DIR}/config.h
+strtoull.o: ${BUILD_DIR}/config.h
+strtoumax.o: ${BUILD_DIR}/config.h
+strtrans.o: ${BUILD_DIR}/config.h
+times.o: ${BUILD_DIR}/config.h
+timeval.o: ${BUILD_DIR}/config.h
+tmpfile.o: ${BUILD_DIR}/config.h ${topdir}/config-top.h 
+uconvert.o: ${BUILD_DIR}/config.h
+ufuncs.o: ${BUILD_DIR}/config.h
+unicode.o: ${BUILD_DIR}/config.h
+utf8.o: ${BUILD_DIR}/config.h
+vprint.o: ${BUILD_DIR}/config.h
+wcsdup.o: ${BUILD_DIR}/config.h
+wcsnwidth.o: ${BUILD_DIR}/config.h
+wcswidth.o: ${BUILD_DIR}/config.h
+winsize.o: ${BUILD_DIR}/config.h
+zcatfd.o: ${BUILD_DIR}/config.h
+zgetline.o: ${BUILD_DIR}/config.h
+zmapfd.o: ${BUILD_DIR}/config.h
+zread.o: ${BUILD_DIR}/config.h
+zwrite.o: ${BUILD_DIR}/config.h
+
+clktck.o: ${topdir}/bashtypes.h
+
+getcwd.o: ${topdir}/bashtypes.h ${topdir}/bashansi.h ${BASHINCDIR}/maxpath.h
+getcwd.o: ${BASHINCDIR}/posixstat.h ${BASHINCDIR}/posixdir.h
+getcwd.o: ${BASHINCDIR}/memalloc.h ${BASHINCDIR}/ansi_stdlib.h
+
+getenv.o: ${topdir}/bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+getenv.o: ${topdir}/shell.h ${topdir}/syntax.h ${topdir}/bashjmp.h ${BASHINCDIR}/posixjmp.h
+getenv.o: ${topdir}/command.h ${BASHINCDIR}/stdc.h ${topdir}/error.h
+getenv.o: ${topdir}/general.h ${topdir}/bashtypes.h ${topdir}/variables.h ${topdir}/conftypes.h
+getenv.o: ${topdir}/array.h ${topdir}/hashlib.h ${topdir}/quit.h
+getenv.o: ${topdir}/unwind_prot.h ${topdir}/dispose_cmd.h
+getenv.o: ${topdir}/make_cmd.h ${topdir}/subst.h ${topdir}/sig.h
+getenv.o: ${BUILD_DIR}/pathnames.h ${topdir}/externs.h
+#getenv.o: ${BUILD_DIR}/version.h
+
+inet_aton.o: ${topdir}/bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+inet_aton.o: ${BASHINCDIR}/stdc.h
+
+itos.o: ${topdir}/bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+itos.o: ${topdir}/shell.h ${topdir}/syntax.h ${topdir}/bashjmp.h ${BASHINCDIR}/posixjmp.h
+itos.o: ${topdir}/command.h ${BASHINCDIR}/stdc.h ${topdir}/error.h
+itos.o: ${topdir}/general.h ${topdir}/bashtypes.h ${topdir}/variables.h ${topdir}/conftypes.h
+itos.o: ${topdir}/array.h ${topdir}/hashlib.h ${topdir}/quit.h
+itos.o: ${topdir}/unwind_prot.h ${topdir}/dispose_cmd.h
+itos.o: ${topdir}/make_cmd.h ${topdir}/subst.h ${topdir}/sig.h
+itos.o: ${BUILD_DIR}/pathnames.h ${topdir}/externs.h
+#itos.o: ${BUILD_DIR}/version.h
+
+makepath.o: ${topdir}/bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+makepath.o: ${topdir}/shell.h ${topdir}/syntax.h ${topdir}/bashjmp.h ${BASHINCDIR}/posixjmp.h
+makepath.o: ${topdir}/command.h ${BASHINCDIR}/stdc.h ${topdir}/error.h
+makepath.o: ${topdir}/general.h ${topdir}/bashtypes.h ${topdir}/variables.h ${topdir}/conftypes.h
+makepath.o: ${topdir}/array.h ${topdir}/hashlib.h ${topdir}/quit.h
+makepath.o: ${topdir}/unwind_prot.h ${topdir}/dispose_cmd.h
+makepath.o: ${topdir}/make_cmd.h ${topdir}/subst.h ${topdir}/sig.h
+makepath.o: ${BUILD_DIR}/pathnames.h ${topdir}/externs.h
+#makepath.o: ${BUILD_DIR}/version.h
+
+netconn.o: ${BASHINCDIR}/posixstat.h ${BASHINCDIR}/filecntl.h
+netconn.o: ${topdir}/bashtypes.h
+
+netopen.o: ${topdir}/bashansi.h ${BASHINCDIR}/ansi_stdlib.h ${topdir}/xmalloc.h
+netopen.o: ${topdir}/shell.h ${topdir}/syntax.h ${topdir}/bashjmp.h ${BASHINCDIR}/posixjmp.h
+netopen.o: ${topdir}/command.h ${BASHINCDIR}/stdc.h ${topdir}/error.h
+netopen.o: ${topdir}/general.h ${topdir}/bashtypes.h ${topdir}/variables.h ${topdir}/conftypes.h
+netopen.o: ${topdir}/array.h ${topdir}/hashlib.h ${topdir}/quit.h
+netopen.o: ${topdir}/unwind_prot.h ${topdir}/dispose_cmd.h
+netopen.o: ${topdir}/make_cmd.h ${topdir}/subst.h ${topdir}/sig.h
+netopen.o: ${BUILD_DIR}/pathnames.h ${topdir}/externs.h
+netopen.o: ${topdir}/bashintl.h ${LIBINTL_H} $(BASHINCDIR)/gettext.h
+#netopen.o: ${BUILD_DIR}/version.h
+
+oslib.o: ${topdir}/bashtypes.h ${topdir}/bashansi.h ${BASHINCDIR}/maxpath.h
+oslib.o: ${topdir}/shell.h ${topdir}/syntax.h ${topdir}/bashjmp.h ${BASHINCDIR}/posixjmp.h
+oslib.o: ${topdir}/command.h ${BASHINCDIR}/stdc.h ${topdir}/error.h
+oslib.o: ${topdir}/general.h ${topdir}/bashtypes.h ${topdir}/variables.h ${topdir}/conftypes.h
+oslib.o: ${topdir}/array.h ${topdir}/hashlib.h ${topdir}/quit.h
+oslib.o: ${topdir}/unwind_prot.h ${topdir}/dispose_cmd.h
+oslib.o: ${topdir}/make_cmd.h ${topdir}/subst.h ${topdir}/sig.h
+oslib.o: ${BUILD_DIR}/pathnames.h ${topdir}/externs.h
+oslib.o: ${BASHINCDIR}/posixstat.h ${BASHINCDIR}/filecntl.h
+oslib.o: ${BASHINCDIR}/ansi_stdlib.h ${BASHINCDIR}/chartypes.h
+#oslib.o: ${BUILD_DIR}/version.h
+
+pathcanon.o: ${topdir}/bashtypes.h ${topdir}/bashansi.h ${BASHINCDIR}/maxpath.h
+pathcanon.o: ${topdir}/shell.h ${topdir}/syntax.h ${topdir}/bashjmp.h ${BASHINCDIR}/posixjmp.h
+pathcanon.o: ${topdir}/command.h ${BASHINCDIR}/stdc.h ${topdir}/error.h
+pathcanon.o: ${topdir}/general.h ${topdir}/bashtypes.h ${topdir}/variables.h ${topdir}/conftypes.h
+pathcanon.o: ${topdir}/array.h ${topdir}/hashlib.h ${topdir}/quit.h
+pathcanon.o: ${topdir}/unwind_prot.h ${topdir}/dispose_cmd.h
+pathcanon.o: ${topdir}/make_cmd.h ${topdir}/subst.h ${topdir}/sig.h
+pathcanon.o: ${BUILD_DIR}/pathnames.h ${topdir}/externs.h
+pathcanon.o: ${BASHINCDIR}/posixstat.h ${BASHINCDIR}/filecntl.h
+pathcanon.o: ${BASHINCDIR}/ansi_stdlib.h ${BASHINCDIR}/chartypes.h
+#pathcanon.o: ${BUILD_DIR}/version.h
+
+pathphys.o: ${topdir}/bashtypes.h ${topdir}/bashansi.h ${BASHINCDIR}/maxpath.h
+pathphys.o: ${topdir}/shell.h ${topdir}/syntax.h ${topdir}/bashjmp.h ${BASHINCDIR}/posixjmp.h
+pathphys.o: ${topdir}/command.h ${BASHINCDIR}/stdc.h ${topdir}/error.h
+pathphys.o: ${topdir}/general.h ${topdir}/bashtypes.h ${topdir}/variables.h ${topdir}/conftypes.h
+pathphys.o: ${topdir}/array.h ${topdir}/hashlib.h ${topdir}/quit.h
+pathphys.o: ${topdir}/unwind_prot.h ${topdir}/dispose_cmd.h
+pathphys.o: ${topdir}/make_cmd.h ${topdir}/subst.h ${topdir}/sig.h
+pathphys.o: ${BUILD_DIR}/pathnames.h ${topdir}/externs.h
+pathphys.o: ${BASHINCDIR}/posixstat.h ${BASHINCDIR}/filecntl.h
+pathphys.o: ${BASHINCDIR}/ansi_stdlib.h ${BASHINCDIR}/chartypes.h
+#pathphys.o: ${BUILD_DIR}/version.h
+
+random.o: ${topdir}/bashtypes.h ${BASHINCDIR}/stdc.h
+random.o: ${topdir}/bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+random.o: ${BASHINCDIR}/filecntl.h
+
+rename.o: ${topdir}/bashtypes.h ${BASHINCDIR}/stdc.h
+rename.o: ${BASHINCDIR}/posixstat.h
+
+setlinebuf.o: ${topdir}/xmalloc.h ${topdir}/bashansi.h
+setlinebuf.o: ${BASHINCDIR}/ansi_stdlib.h ${BASHINCDIR}/stdc.h
+
+eaccess.o: ${topdir}/bashtypes.h
+eaccess.o: ${BASHINCDIR}/posixstat.h
+eaccess.o: ${topdir}/bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+eaccess.o: ${BASHINCDIR}/filecntl.h
+eaccess.o: ${BASHINCDIR}/stdc.h
+eaccess.o: ${topdir}/shell.h ${topdir}/syntax.h ${topdir}/bashjmp.h ${BASHINCDIR}/posixjmp.h
+eaccess.o: ${topdir}/command.h ${BASHINCDIR}/stdc.h ${topdir}/error.h
+eaccess.o: ${topdir}/general.h ${topdir}/bashtypes.h ${topdir}/variables.h ${topdir}/conftypes.h
+eaccess.o: ${topdir}/array.h ${topdir}/hashlib.h ${topdir}/quit.h
+eaccess.o: ${topdir}/unwind_prot.h ${topdir}/dispose_cmd.h
+eaccess.o: ${topdir}/make_cmd.h ${topdir}/subst.h ${topdir}/sig.h
+eaccess.o: ${BUILD_DIR}/pathnames.h ${topdir}/externs.h
+#eaccess.o: ${BUILD_DIR}/version.h
+
+shmatch.o: ${BASHINCDIR}/stdc.h ${topdir}/bashansi.h
+shmatch.o: ${BASHINCDIR}/ansi_stdlib.h ${topdir}/xmalloc.h
+shmatch.o: ${topdir}/shell.h ${topdir}/syntax.h ${topdir}/bashjmp.h ${BASHINCDIR}/posixjmp.h
+shmatch.o: ${topdir}/command.h ${BASHINCDIR}/stdc.h ${topdir}/error.h
+shmatch.o: ${topdir}/general.h ${topdir}/bashtypes.h ${topdir}/variables.h ${topdir}/conftypes.h
+shmatch.o: ${topdir}/array.h ${topdir}/hashlib.h ${topdir}/quit.h
+shmatch.o: ${topdir}/unwind_prot.h ${topdir}/dispose_cmd.h
+shmatch.o: ${topdir}/make_cmd.h ${topdir}/subst.h ${topdir}/sig.h
+shmatch.o: ${BUILD_DIR}/pathnames.h ${topdir}/externs.h
+
+shquote.o: ${BASHINCDIR}/stdc.h ${topdir}/bashansi.h
+shquote.o: ${BASHINCDIR}/ansi_stdlib.h ${topdir}/xmalloc.h
+shquote.o: ${BASHINCDIR}/shmbutil.h ${BASHINCDIR}/shmbchar.h
+
+shtty.o: ${BASHINCDIR}/shtty.h
+shtty.o: ${BASHINCDIR}/stdc.h
+
+snprintf.o: ${BASHINCDIR}/stdc.h ${topdir}/bashansi.h ${topdir}/xmalloc.h
+snprintf.o: ${BASHINCDIR}/ansi_stdlib.h ${BASHINCDIR}/chartypes.h
+snprintf.o: ${BASHINCDIR}/shmbutil.h ${BASHINCDIR}/shmbchar.h
+snprintf.o: ${BASHINCDIR}/typemax.h
+
+spell.o: ${topdir}/bashtypes.h
+spell.o: ${BASHINCDIR}/posixstat.h ${BASHINCDIR}/posixdir.h
+spell.o: ${BASHINCDIR}/ansi_stdlib.h
+
+strcasecmp.o: ${BASHINCDIR}/stdc.h ${topdir}/bashansi.h
+strcasecmp.o: ${BASHINCDIR}/ansi_stdlib.h ${BASHINCDIR}/chartypes.h
+
+strerror.o: ${topdir}/bashtypes.h
+strerror.o: ${topdir}/shell.h ${topdir}/syntax.h ${topdir}/bashjmp.h ${BASHINCDIR}/posixjmp.h
+strerror.o: ${topdir}/command.h ${BASHINCDIR}/stdc.h ${topdir}/error.h
+strerror.o: ${topdir}/general.h ${topdir}/bashtypes.h ${topdir}/variables.h ${topdir}/conftypes.h
+strerror.o: ${topdir}/array.h ${topdir}/hashlib.h ${topdir}/quit.h
+strerror.o: ${topdir}/unwind_prot.h ${topdir}/dispose_cmd.h
+strerror.o: ${topdir}/make_cmd.h ${topdir}/subst.h ${topdir}/sig.h
+strerror.o: ${BUILD_DIR}/pathnames.h ${topdir}/externs.h
+#strerror.o: ${BUILD_DIR}/version.h
+
+strcasestr.o: ${BASHINCDIR}/stdc.h ${topdir}/bashansi.h
+strcasestr.o: ${BASHINCDIR}/ansi_stdlib.h ${BASHINCDIR}/chartypes.h
+
+stringlist.o: ${topdir}/bashansi.h
+stringlist.o: ${topdir}/shell.h ${topdir}/syntax.h ${topdir}/bashjmp.h ${BASHINCDIR}/posixjmp.h
+stringlist.o: ${topdir}/command.h ${BASHINCDIR}/stdc.h ${topdir}/error.h
+stringlist.o: ${topdir}/general.h ${topdir}/bashtypes.h ${topdir}/variables.h ${topdir}/conftypes.h
+stringlist.o: ${topdir}/array.h ${topdir}/hashlib.h ${topdir}/quit.h
+stringlist.o: ${topdir}/unwind_prot.h ${topdir}/dispose_cmd.h
+stringlist.o: ${topdir}/make_cmd.h ${topdir}/subst.h ${topdir}/sig.h
+stringlist.o: ${BUILD_DIR}/pathnames.h ${topdir}/externs.h
+#stringlist.o: ${BUILD_DIR}/version.h
+
+stringvec.o: ${topdir}/bashansi.h ${BASHINCDIR}/chartypes.h
+stringvec.o: ${topdir}/shell.h ${topdir}/syntax.h ${topdir}/bashjmp.h ${BASHINCDIR}/posixjmp.h
+stringvec.o: ${topdir}/command.h ${BASHINCDIR}/stdc.h ${topdir}/error.h
+stringvec.o: ${topdir}/general.h ${topdir}/bashtypes.h ${topdir}/variables.h ${topdir}/conftypes.h
+stringvec.o: ${topdir}/array.h ${topdir}/hashlib.h ${topdir}/quit.h
+stringvec.o: ${topdir}/unwind_prot.h ${topdir}/dispose_cmd.h
+stringvec.o: ${topdir}/make_cmd.h ${topdir}/subst.h ${topdir}/sig.h
+stringvec.o: ${BUILD_DIR}/pathnames.h ${topdir}/externs.h
+#stringvec.o: ${BUILD_DIR}/version.h
+
+strnlen.o: ${BASHINCDIR}/stdc.h
+
+strpbrk.o: ${BASHINCDIR}/stdc.h
+
+strtod.o: ${topdir}/bashansi.h
+strtod.o: ${BASHINCDIR}/ansi_stdlib.h ${BASHINCDIR}/chartypes.h
+
+strtoimax.o: ${BASHINCDIR}/stdc.h
+
+strtol.o: ${topdir}/bashansi.h
+strtol.o: ${BASHINCDIR}/ansi_stdlib.h ${BASHINCDIR}/chartypes.h
+strtol.o: ${BASHINCDIR}/typemax.h
+
+strtoll.o: ${topdir}/bashansi.h
+strtoll.o: ${BASHINCDIR}/ansi_stdlib.h ${BASHINCDIR}/chartypes.h
+strtoll.o: ${BASHINCDIR}/typemax.h
+
+strtoul.o: ${topdir}/bashansi.h
+strtoul.o: ${BASHINCDIR}/ansi_stdlib.h ${BASHINCDIR}/chartypes.h
+strtoul.o: ${BASHINCDIR}/typemax.h
+
+strtoull.o: ${topdir}/bashansi.h
+strtoull.o: ${BASHINCDIR}/ansi_stdlib.h ${BASHINCDIR}/chartypes.h
+strtoull.o: ${BASHINCDIR}/typemax.h
+
+strtoumax.o: ${BASHINCDIR}/stdc.h
+
+strtrans.o: ${topdir}/bashansi.h
+strtrans.o: ${BASHINCDIR}/ansi_stdlib.h ${BASHINCDIR}/chartypes.h
+strtrans.o: ${topdir}/shell.h ${topdir}/syntax.h ${topdir}/bashjmp.h ${BASHINCDIR}/posixjmp.h
+strtrans.o: ${topdir}/command.h ${BASHINCDIR}/stdc.h ${topdir}/error.h
+strtrans.o: ${topdir}/general.h ${topdir}/bashtypes.h ${topdir}/variables.h ${topdir}/conftypes.h
+strtrans.o: ${topdir}/array.h ${topdir}/hashlib.h ${topdir}/quit.h
+strtrans.o: ${topdir}/unwind_prot.h ${topdir}/dispose_cmd.h
+strtrans.o: ${topdir}/make_cmd.h ${topdir}/subst.h ${topdir}/sig.h
+strtrans.o: ${BUILD_DIR}/pathnames.h ${topdir}/externs.h
+strtrans.o: ${BASHINCDIR}/shmbutil.h ${BASHINCDIR}/shmbchar.h
+#strtrans.o: ${BUILD_DIR}/version.h
+
+times.o: ${BASHINCDIR}/systimes.h
+times.o: ${BASHINCDIR}/posixtime.h
+
+timeval.o: ${BASHINCDIR}/posixtime.h
+gettimeofday.o: ${BASHINCDIR}/posixtime.h
+
+tmpfile.o: ${topdir}/bashtypes.h
+tmpfile.o: ${BASHINCDIR}/chartypes.h
+tmpfile.o: ${BASHINCDIR}/posixstat.h
+tmpfile.o: ${BASHINCDIR}/filecntl.h
+tmpfile.o: ${topdir}/shell.h ${topdir}/syntax.h ${topdir}/bashjmp.h ${BASHINCDIR}/posixjmp.h
+tmpfile.o: ${topdir}/command.h ${BASHINCDIR}/stdc.h ${topdir}/error.h
+tmpfile.o: ${topdir}/general.h ${topdir}/bashtypes.h ${topdir}/variables.h ${topdir}/conftypes.h
+tmpfile.o: ${topdir}/array.h ${topdir}/hashlib.h ${topdir}/quit.h
+tmpfile.o: ${topdir}/unwind_prot.h ${topdir}/dispose_cmd.h
+tmpfile.o: ${topdir}/make_cmd.h ${topdir}/subst.h ${topdir}/sig.h
+tmpfile.o: ${BUILD_DIR}/pathnames.h ${topdir}/externs.h
+
+uconvert.o: ${topdir}/bashtypes.h
+uconvert.o: ${BASHINCDIR}/chartypes.h
+uconvert.o: ${topdir}/shell.h ${topdir}/syntax.h ${topdir}/bashjmp.h ${BASHINCDIR}/posixjmp.h
+uconvert.o: ${topdir}/command.h ${BASHINCDIR}/stdc.h ${topdir}/error.h
+uconvert.o: ${topdir}/general.h ${topdir}/bashtypes.h ${topdir}/variables.h ${topdir}/conftypes.h
+uconvert.o: ${topdir}/array.h ${topdir}/hashlib.h ${topdir}/quit.h
+uconvert.o: ${topdir}/unwind_prot.h ${topdir}/dispose_cmd.h
+uconvert.o: ${topdir}/make_cmd.h ${topdir}/subst.h ${topdir}/sig.h
+uconvert.o: ${BUILD_DIR}/pathnames.h ${topdir}/externs.h
+
+ufuncs.o: ${topdir}/bashtypes.h
+
+clock.o: ${BASHINCDIR}/posixtime.h
+
+mailstat.o: ${topdir}/bashansi.h
+mailstat.o: ${topdir}/bashtypes.h
+mailstat.o: ${BASHINCDIR}/ansi_stdlib.h
+mailstat.o: ${BASHINCDIR}/posixstat.h
+mailstat.o: ${BASHINCDIR}/posixdir.h
+mailstat.o: ${BASHINCDIR}/maxpath.h
+
+fmtulong.o: ${topdir}/bashansi.h
+fmtulong.o: ${BASHINCDIR}/ansi_stdlib.h
+fmtulong.o: ${BASHINCDIR}/chartypes.h
+fmtulong.o: ${BASHINCDIR}/stdc.h
+fmtulong.o: ${BASHINCDIR}/typemax.h
+fmtulong.o: ${topdir}/bashintl.h ${LIBINTL_H} ${BASHINCDIR}/gettext.h
+
+fmtullong.o: ${topdir}/bashansi.h
+fmtullong.o: ${BASHINCDIR}/ansi_stdlib.h
+fmtullong.o: ${BASHINCDIR}/chartypes.h
+fmtullong.o: ${BASHINCDIR}/stdc.h
+fmtullong.o: ${BASHINCDIR}/typemax.h
+fmtullong.o: ${topdir}/bashintl.h ${LIBINTL_H} ${BASHINCDIR}/gettext.h
+
+fmtumax.o: ${topdir}/bashansi.h
+fmtumax.o: ${BASHINCDIR}/ansi_stdlib.h
+fmtumax.o: ${BASHINCDIR}/chartypes.h
+fmtumax.o: ${BASHINCDIR}/stdc.h
+fmtumax.o: ${BASHINCDIR}/typemax.h
+fmtumax.o: ${topdir}/bashintl.h ${LIBINTL_H} ${BASHINCDIR}/gettext.h
+
+wcsdup.o: ${topdir}/bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+wcsdup.o: ${BASHINCDIR}/stdc.h
+wcsdup.o: ${topdir}/xmalloc.h
+
+wcsnwidth.o: ${topdir}/bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+wcsnwidth.o: ${BASHINCDIR}/stdc.h
+
+wcswidth.o: ${topdir}/bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+wcswidth.o: ${BASHINCDIR}/stdc.h
+
+mbschr.o: ${topdir}/bashansi.h
+mbschr.o: ${BASHINCDIR}/ansi_stdlib.h
+mbschr.o: ${BASHINCDIR}/shmbutil.h ${BASHINCDIR}/shmbchar.h
+
+zgetline.o: ${topdir}/bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+zgetline.o: ${BASHINCDIR}/stdc.h
+zgetline.o: ${topdir}/xmalloc.h
+zgetline.o: ${topdir}/bashtypes.h
+
+mbscasecmp.o: ${topdir}/bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+mbscasecmp.o: ${BASHINCDIR}/stdc.h
+mbscasecmp.o: ${topdir}/xmalloc.h
+
+mbscmp.o: ${topdir}/bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+mbscmp.o: ${BASHINCDIR}/stdc.h
+mbscmp.o: ${topdir}/xmalloc.h
+
+casemod.o: ${topdir}/bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+casemod.o: ${BASHINCDIR}/stdc.h
+casemod.o: ${topdir}/xmalloc.h
+casemod.o: ${topdir}/bashtypes.h
+casemod.o: ${BASHINCDIR}/shmbutil.h ${BASHINCDIR}/shmbchar.h
+casemod.o: ${topdir}/bashintl.h ${LIBINTL_H} ${BASHINCDIR}/gettext.h
+
+dprintf.o: ${BASHINCDIR}/stdc.h
+
+input_avail.o: ${topdir}/bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+input_avail.o: ${BASHINCDIR}/stdc.h
+input_avail.o: ${topdir}/xmalloc.h ${BASHINCDIR}/posixselect.h
+
+mktime.o: ${topdir}/bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+mktime.o: ${BASHINCDIR}/stdc.h
+
+fnxform.o: ${topdir}/bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+fnxform.o: ${BASHINCDIR}/stdc.h
+fnxform.o: ${topdir}/bashtypes.h
+fnxform.o: ${topdir}/bashintl.h ${LIBINTL_H} ${BASHINCDIR}/gettext.h
+
+shmbchar.o: ${BASHINCDIR}/shmbchar.h
+shmbchar.o: ${BASHINCDIR}/shmbutil.h
+
+unicode.o: ${topdir}/bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+unicode.o: ${BASHINCDIR}/stdc.h
+unicode.o: ${topdir}/xmalloc.h
+
+utf8.o: ${topdir}/bashansi.h
+utf8.o: ${BASHINCDIR}/ansi_stdlib.h
+utf8.o: ${BASHINCDIR}/shmbutil.h ${BASHINCDIR}/shmbchar.h
+
+winsize.o: ${BASHINCDIR}/stdc.h
+winsize.o: ${topdir}/xmalloc.h
+winsize.o: ${topdir}/bashtypes.h
+
+zmapfd.o: ${topdir}/bashansi.h ${BASHINCDIR}/ansi_stdlib.h
+zmapfd.o: ${BASHINCDIR}/stdc.h
+zmapfd.o: ${topdir}/command.h
+zmapfd.o: ${topdir}/general.h
+zmapfd.o: ${topdir}/bashtypes.h ${BASHINCDIR}/chartypes.h ${topdir}/xmalloc.h
diff --git a/lib/sh/casemod.c b/lib/sh/casemod.c
new file mode 100644
index 0000000..bdd96f8
--- /dev/null
+++ b/lib/sh/casemod.c
@@ -0,0 +1,273 @@
+/* casemod.c -- functions to change case of strings */
+
+/* Copyright (C) 2008-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif /* HAVE_UNISTD_H */
+
+#include <stdc.h>
+
+#include <bashansi.h>
+#include <bashintl.h>
+#include <bashtypes.h>
+
+#include <stdio.h>
+#include <ctype.h>
+#include <xmalloc.h>
+
+#include <shmbchar.h>
+#include <shmbutil.h>
+#include <chartypes.h>
+#include <typemax.h>
+
+#include <glob/strmatch.h>
+
+#define _to_wupper(wc)	(iswlower (wc) ? towupper (wc) : (wc))
+#define _to_wlower(wc)	(iswupper (wc) ? towlower (wc) : (wc))
+
+#if !defined (HANDLE_MULTIBYTE)
+#  define cval(s, i)	((s)[(i)])
+#  define iswalnum(c)	(isalnum(c))
+#  define TOGGLE(x)	(ISUPPER (x) ? tolower ((unsigned char)x) : (TOUPPER (x)))
+#else
+#  define TOGGLE(x)	(iswupper (x) ? towlower (x) : (_to_wupper(x)))
+#endif
+
+/* These must agree with the defines in externs.h */
+#define CASE_NOOP	0x0000
+#define CASE_LOWER	0x0001
+#define CASE_UPPER	0x0002
+#define CASE_CAPITALIZE	0x0004
+#define CASE_UNCAP	0x0008
+#define CASE_TOGGLE	0x0010
+#define CASE_TOGGLEALL	0x0020
+#define CASE_UPFIRST	0x0040
+#define CASE_LOWFIRST	0x0080
+
+#define CASE_USEWORDS	0x1000		/* modify behavior to act on words in passed string */
+
+extern char *substring PARAMS((char *, int, int));
+
+#ifndef UCHAR_MAX
+#  define UCHAR_MAX	TYPE_MAXIMUM(unsigned char)
+#endif
+
+#if defined (HANDLE_MULTIBYTE)
+static wchar_t
+cval (s, i)
+     char *s;
+     int i;
+{
+  size_t tmp;
+  wchar_t wc;
+  int l;
+  mbstate_t mps;  
+
+  if (MB_CUR_MAX == 1 || is_basic (s[i]))
+    return ((wchar_t)s[i]);
+  l = strlen (s);
+  if (i >= (l - 1))
+    return ((wchar_t)s[i]);
+  memset (&mps, 0, sizeof (mbstate_t));
+  tmp = mbrtowc (&wc, s + i, l - i, &mps);
+  if (MB_INVALIDCH (tmp) || MB_NULLWCH (tmp))
+    return ((wchar_t)s[i]);
+  return wc;  
+}
+#endif
+
+/* Modify the case of characters in STRING matching PAT based on the value of
+   FLAGS.  If PAT is null, modify the case of each character */
+char *
+sh_modcase (string, pat, flags)
+     const char *string;
+     char *pat;
+     int flags;
+{
+  int start, next, end, retind;
+  int inword, c, nc, nop, match, usewords;
+  char *ret, *s;
+  wchar_t wc;
+  int mb_cur_max;
+#if defined (HANDLE_MULTIBYTE)
+  wchar_t nwc;
+  char mb[MB_LEN_MAX+1];
+  int mlen;
+  size_t m;
+  mbstate_t state;
+#endif
+
+  if (string == 0 || *string == 0)
+    {
+      ret = (char *)xmalloc (1);
+      ret[0] = '\0';
+      return ret;
+    }
+
+#if defined (HANDLE_MULTIBYTE)
+  memset (&state, 0, sizeof (mbstate_t));
+#endif
+
+  start = 0;
+  end = strlen (string);
+  mb_cur_max = MB_CUR_MAX;
+
+  ret = (char *)xmalloc (2*end + 1);
+  retind = 0;
+
+  /* See if we are supposed to split on alphanumerics and operate on each word */
+  usewords = (flags & CASE_USEWORDS);
+  flags &= ~CASE_USEWORDS;
+
+  inword = 0;
+  while (start < end)
+    {
+      wc = cval ((char *)string, start);
+
+      if (iswalnum (wc) == 0)
+	inword = 0;
+
+      if (pat)
+	{
+	  next = start;
+	  ADVANCE_CHAR (string, end, next);
+	  s = substring ((char *)string, start, next);
+	  match = strmatch (pat, s, FNM_EXTMATCH) != FNM_NOMATCH;
+	  free (s);
+	  if (match == 0)
+            {
+              /* copy unmatched portion */
+              memcpy (ret + retind, string + start, next - start);
+              retind += next - start;
+              start = next;
+              inword = 1;
+              continue;
+            }
+	}
+
+      /* XXX - for now, the toggling operators work on the individual
+	 words in the string, breaking on alphanumerics.  Should I
+	 leave the capitalization operators to do that also? */
+      if (flags == CASE_CAPITALIZE)
+	{
+	  if (usewords)
+	    nop = inword ? CASE_LOWER : CASE_UPPER;
+	  else
+	    nop = (start > 0) ? CASE_LOWER : CASE_UPPER;
+	  inword = 1;
+	}
+      else if (flags == CASE_UNCAP)
+	{
+	  if (usewords)
+	    nop = inword ? CASE_UPPER : CASE_LOWER;
+	  else
+	    nop = (start > 0) ? CASE_UPPER : CASE_LOWER;
+	  inword = 1;
+	}
+      else if (flags == CASE_UPFIRST)
+ 	{
+ 	  if (usewords)
+	    nop = inword ? CASE_NOOP : CASE_UPPER;
+	  else
+	    nop = (start > 0) ? CASE_NOOP : CASE_UPPER;
+ 	  inword = 1;
+ 	}
+      else if (flags == CASE_LOWFIRST)
+ 	{
+ 	  if (usewords)
+	    nop = inword ? CASE_NOOP : CASE_LOWER;
+	  else
+	    nop = (start > 0) ? CASE_NOOP : CASE_LOWER;
+ 	  inword = 1;
+ 	}
+      else if (flags == CASE_TOGGLE)
+	{
+	  nop = inword ? CASE_NOOP : CASE_TOGGLE;
+	  inword = 1;
+	}
+      else
+	nop = flags;
+
+      /* Can't short-circuit, some locales have multibyte upper and lower
+	 case equivalents of single-byte ascii characters (e.g., Turkish) */
+      if (mb_cur_max == 1)
+	{
+singlebyte:
+	  switch (nop)
+	    {
+	    default:
+	    case CASE_NOOP:  nc = wc; break;
+	    case CASE_UPPER:  nc = TOUPPER (wc); break;
+	    case CASE_LOWER:  nc = TOLOWER (wc); break;
+	    case CASE_TOGGLEALL:
+	    case CASE_TOGGLE: nc = TOGGLE (wc); break;
+	    }
+	  ret[retind++] = nc;
+	}
+#if defined (HANDLE_MULTIBYTE)
+      else
+	{
+	  m = mbrtowc (&wc, string + start, end - start, &state);
+	  /* Have to go through wide case conversion even for single-byte
+	     chars, to accommodate single-byte characters where the
+	     corresponding upper or lower case equivalent is multibyte. */
+	  if (MB_INVALIDCH (m))
+	    {
+	      wc = (unsigned char)string[start];
+	      goto singlebyte;
+	    }
+	  else if (MB_NULLWCH (m))
+	    wc = L'\0';
+	  switch (nop)
+	    {
+	    default:
+	    case CASE_NOOP:  nwc = wc; break;
+	    case CASE_UPPER:  nwc = _to_wupper (wc); break;
+	    case CASE_LOWER:  nwc = _to_wlower (wc); break;
+	    case CASE_TOGGLEALL:
+	    case CASE_TOGGLE: nwc = TOGGLE (wc); break;
+	    }
+
+	  /* We don't have to convert `wide' characters that are in the
+	     unsigned char range back to single-byte `multibyte' characters. */
+	  if ((int)nwc <= UCHAR_MAX && is_basic ((int)nwc))
+	    ret[retind++] = nwc;
+	  else
+	    {
+	      mlen = wcrtomb (mb, nwc, &state);
+	      if (mlen > 0)
+		mb[mlen] = '\0';
+	      /* Don't assume the same width */
+	      strncpy (ret + retind, mb, mlen);
+	      retind += mlen;
+	    }
+	}
+#endif
+
+      ADVANCE_CHAR (string, end, start);
+    }
+
+  ret[retind] = '\0';
+  return ret;
+}
diff --git a/lib/sh/clktck.c b/lib/sh/clktck.c
new file mode 100644
index 0000000..8b9b5b3
--- /dev/null
+++ b/lib/sh/clktck.c
@@ -0,0 +1,61 @@
+/* clktck.c - get the value of CLK_TCK. */
+
+/* Copyright (C) 1997 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#include <bashtypes.h>
+#if defined (HAVE_SYS_PARAM_H)
+#  include <sys/param.h>
+#endif
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#if defined (HAVE_LIMITS_H)
+#  include <limits.h>
+#endif
+
+#if !defined (HAVE_SYSCONF) || !defined (_SC_CLK_TCK)
+#  if !defined (CLK_TCK)
+#    if defined (HZ)
+#      define CLK_TCK HZ
+#    else
+#      define CLK_TCK 60
+#    endif
+#  endif /* !CLK_TCK */
+#endif /* !HAVE_SYSCONF && !_SC_CLK_TCK */
+
+long
+get_clk_tck ()
+{
+  static long retval = 0;
+
+  if (retval != 0)
+    return (retval);
+
+#if defined (HAVE_SYSCONF) && defined (_SC_CLK_TCK)
+  retval = sysconf (_SC_CLK_TCK);
+#else /* !SYSCONF || !_SC_CLK_TCK */
+  retval = CLK_TCK;
+#endif /* !SYSCONF || !_SC_CLK_TCK */
+
+  return (retval);
+}
diff --git a/lib/sh/clock.c b/lib/sh/clock.c
new file mode 100644
index 0000000..c6c52bf
--- /dev/null
+++ b/lib/sh/clock.c
@@ -0,0 +1,87 @@
+/* clock.c - operations on struct tms and clock_t's */
+
+/* Copyright (C) 1999 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (HAVE_TIMES)
+
+#include <sys/types.h>
+#include <posixtime.h>
+
+#if defined (HAVE_SYS_TIMES_H)
+#  include <sys/times.h>
+#endif
+
+#include <stdio.h>
+#include <stdc.h>
+
+#include <bashintl.h>
+
+#ifndef locale_decpoint
+extern int locale_decpoint PARAMS((void));
+#endif
+
+extern long get_clk_tck PARAMS((void));
+
+void
+clock_t_to_secs (t, sp, sfp)
+     clock_t t;
+     time_t *sp;
+     int *sfp;
+{
+  static long clk_tck = -1;
+
+  if (clk_tck == -1)
+    clk_tck = get_clk_tck ();
+
+  *sfp = t % clk_tck;
+  *sfp = (*sfp * 1000) / clk_tck;
+
+  *sp = t / clk_tck;
+
+  /* Sanity check */
+  if (*sfp >= 1000)
+    {
+      *sp += 1;
+      *sfp -= 1000;
+    }
+}
+
+/* Print the time defined by a clock_t (returned by the `times' and `time'
+   system calls) in a standard way to stdio stream FP.  This is scaled in
+   terms of the value of CLK_TCK, which is what is returned by the
+   `times' call. */
+void
+print_clock_t (fp, t)
+     FILE *fp;
+     clock_t t;
+{
+  time_t timestamp;
+  long minutes;
+  int seconds, seconds_fraction;
+
+  clock_t_to_secs (t, &timestamp, &seconds_fraction);
+
+  minutes = timestamp / 60;
+  seconds = timestamp % 60;
+
+  fprintf (fp, "%ldm%d%c%03ds",  minutes, seconds, locale_decpoint(), seconds_fraction);
+}
+#endif /* HAVE_TIMES */
diff --git a/lib/sh/dprintf.c b/lib/sh/dprintf.c
new file mode 100644
index 0000000..b3b5d64
--- /dev/null
+++ b/lib/sh/dprintf.c
@@ -0,0 +1,70 @@
+/* dprintf -- printf to a file descriptor */
+
+/* Copyright (C) 2008-2010 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+                                 
+#ifdef HAVE_CONFIG_H
+#  include <config.h>
+#endif
+
+#include <stdc.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#if defined (PREFER_STDARG)
+#  include <stdarg.h>
+#else
+#  include <varargs.h>
+#endif
+
+#include <stdio.h>
+
+int
+#if defined (PREFER_STDARG)
+dprintf(int fd, const char *format, ...)
+#else
+dprintf(fd, format, va_alist)
+     int fd;
+     const char *format;
+     va_dcl
+#endif
+{
+  FILE *fp;
+  int fd2, rc, r2;
+  va_list args;
+
+  if ((fd2 = dup(fd)) < 0)
+    return -1;
+  fp = fdopen (fd2, "w");
+  if (fp == 0)
+    {
+      close (fd2);
+      return -1;
+    }
+
+  SH_VA_START (args, format);
+  rc = vfprintf (fp, format, args);
+  fflush (fp);
+  va_end (args);
+
+  r2 = fclose (fp);	/* check here */
+
+  return rc;
+}           
diff --git a/lib/sh/eaccess.c b/lib/sh/eaccess.c
new file mode 100644
index 0000000..c3043ec
--- /dev/null
+++ b/lib/sh/eaccess.c
@@ -0,0 +1,244 @@
+/* eaccess.c - eaccess replacement for the shell, plus other access functions. */
+
+/* Copyright (C) 2006-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <stdio.h>
+
+#include "bashtypes.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "bashansi.h"
+
+#include <errno.h>
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+#if !defined (_POSIX_VERSION) && defined (HAVE_SYS_FILE_H)
+#  include <sys/file.h>
+#endif /* !_POSIX_VERSION */
+#include "posixstat.h"
+#include "filecntl.h"
+
+#include "shell.h"
+
+#if !defined (R_OK)
+#define R_OK 4
+#define W_OK 2
+#define X_OK 1
+#define F_OK 0
+#endif /* R_OK */
+
+static int path_is_devfd PARAMS((const char *));
+static int sh_stataccess PARAMS((const char *, int));
+#if HAVE_DECL_SETREGID
+static int sh_euidaccess PARAMS((const char *, int));
+#endif
+
+static int
+path_is_devfd (path)
+     const char *path;
+{
+  if (path[0] == '/' && path[1] == 'd' && strncmp (path, "/dev/fd/", 8) == 0)
+    return 1;
+  else if (STREQN (path, "/dev/std", 8))
+    {
+      if (STREQ (path+8, "in") || STREQ (path+8, "out") || STREQ (path+8, "err"))
+	return 1;
+      else
+	return 0;
+    }
+  else
+    return 0;
+}
+
+/* A wrapper for stat () which disallows pathnames that are empty strings
+   and handles /dev/fd emulation on systems that don't have it. */
+int
+sh_stat (path, finfo)
+     const char *path;
+     struct stat *finfo;
+{
+  static char *pbuf = 0;
+
+  if (*path == '\0')
+    {
+      errno = ENOENT;
+      return (-1);
+    }
+  if (path[0] == '/' && path[1] == 'd' && strncmp (path, "/dev/fd/", 8) == 0)
+    {
+      /* If stating /dev/fd/n doesn't produce the same results as fstat of
+	 FD N, then define DEV_FD_STAT_BROKEN */
+#if !defined (HAVE_DEV_FD) || defined (DEV_FD_STAT_BROKEN)
+      intmax_t fd;
+      int r;
+
+      if (legal_number (path + 8, &fd) && fd == (int)fd)
+        {
+          r = fstat ((int)fd, finfo);
+          if (r == 0 || errno != EBADF)
+            return (r);
+        }
+      errno = ENOENT;
+      return (-1);
+#else
+  /* If HAVE_DEV_FD is defined, DEV_FD_PREFIX is defined also, and has a
+     trailing slash.  Make sure /dev/fd/xx really uses DEV_FD_PREFIX/xx.
+     On most systems, with the notable exception of linux, this is
+     effectively a no-op. */
+      pbuf = xrealloc (pbuf, sizeof (DEV_FD_PREFIX) + strlen (path + 8));
+      strcpy (pbuf, DEV_FD_PREFIX);
+      strcat (pbuf, path + 8);
+      return (stat (pbuf, finfo));
+#endif /* !HAVE_DEV_FD */
+    }
+#if !defined (HAVE_DEV_STDIN)
+  else if (STREQN (path, "/dev/std", 8))
+    {
+      if (STREQ (path+8, "in"))
+	return (fstat (0, finfo));
+      else if (STREQ (path+8, "out"))
+	return (fstat (1, finfo));
+      else if (STREQ (path+8, "err"))
+	return (fstat (2, finfo));
+      else
+	return (stat (path, finfo));
+    }
+#endif /* !HAVE_DEV_STDIN */
+  return (stat (path, finfo));
+}
+
+/* Do the same thing access(2) does, but use the effective uid and gid,
+   and don't make the mistake of telling root that any file is
+   executable.  This version uses stat(2). */
+static int
+sh_stataccess (path, mode)
+     const char *path;
+     int mode;
+{
+  struct stat st;
+
+  if (sh_stat (path, &st) < 0)
+    return (-1);
+
+  if (current_user.euid == 0)
+    {
+      /* Root can read or write any file. */
+      if ((mode & X_OK) == 0)
+	return (0);
+
+      /* Root can execute any file that has any one of the execute
+	 bits set. */
+      if (st.st_mode & S_IXUGO)
+	return (0);
+    }
+
+  if (st.st_uid == current_user.euid)	/* owner */
+    mode <<= 6;
+  else if (group_member (st.st_gid))
+    mode <<= 3;
+
+  if (st.st_mode & mode)
+    return (0);
+
+  errno = EACCES;
+  return (-1);
+}
+
+#if HAVE_DECL_SETREGID
+/* Version to call when uid != euid or gid != egid.  We temporarily swap
+   the effective and real uid and gid as appropriate. */
+static int
+sh_euidaccess (path, mode)
+     const char *path;
+     int mode;
+{
+  int r, e;
+
+  if (current_user.uid != current_user.euid)
+    setreuid (current_user.euid, current_user.uid);
+  if (current_user.gid != current_user.egid)
+    setregid (current_user.egid, current_user.gid);
+
+  r = access (path, mode);
+  e = errno;
+
+  if (current_user.uid != current_user.euid)
+    setreuid (current_user.uid, current_user.euid);
+  if (current_user.gid != current_user.egid)
+    setregid (current_user.gid, current_user.egid);
+
+  errno = e;
+  return r;  
+}
+#endif
+
+int
+sh_eaccess (path, mode)
+     const char *path;
+     int mode;
+{
+  int ret;
+
+  if (path_is_devfd (path))
+    return (sh_stataccess (path, mode));
+
+#if (defined (HAVE_FACCESSAT) && defined (AT_EACCESS)) || defined (HAVE_EACCESS)
+#  if defined (HAVE_FACCESSAT) && defined (AT_EACCESS)
+  ret = faccessat (AT_FDCWD, path, mode, AT_EACCESS);
+#  else		/* HAVE_EACCESS */	/* FreeBSD */
+  ret = eaccess (path, mode);	/* XXX -- not always correct for X_OK */
+#  endif	/* HAVE_EACCESS */
+#  if defined (__FreeBSD__) || defined (SOLARIS) || defined (_AIX)
+  if (ret == 0 && current_user.euid == 0 && mode == X_OK)
+    return (sh_stataccess (path, mode));
+#  endif	/* __FreeBSD__ || SOLARIS || _AIX */
+  return ret;
+#elif defined (EFF_ONLY_OK)		/* SVR4(?), SVR4.2 */
+  return access (path, mode|EFF_ONLY_OK);
+#else
+  if (mode == F_OK)
+    return (sh_stataccess (path, mode));
+    
+#  if HAVE_DECL_SETREGID
+  if (current_user.uid != current_user.euid || current_user.gid != current_user.egid)
+    return (sh_euidaccess (path, mode));
+#  endif
+
+  if (current_user.uid == current_user.euid && current_user.gid == current_user.egid)
+    {
+      ret = access (path, mode);
+#if defined (__FreeBSD__) || defined (SOLARIS)
+      if (ret == 0 && current_user.euid == 0 && mode == X_OK)
+	return (sh_stataccess (path, mode));
+#endif
+      return ret;
+    }
+
+  return (sh_stataccess (path, mode));
+#endif
+}
diff --git a/lib/sh/fmtullong.c b/lib/sh/fmtullong.c
new file mode 100644
index 0000000..97a1dc1
--- /dev/null
+++ b/lib/sh/fmtullong.c
@@ -0,0 +1,31 @@
+/* fmtullong.c - convert `long long int' to string */
+
+/* Copyright (C) 2001-2002 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#ifdef HAVE_LONG_LONG
+
+#define LONG		long long
+#define UNSIGNED_LONG	unsigned long long
+#define fmtulong	fmtullong
+
+#include "fmtulong.c"
+
+#endif
diff --git a/lib/sh/fmtulong.c b/lib/sh/fmtulong.c
new file mode 100644
index 0000000..0ccc22b
--- /dev/null
+++ b/lib/sh/fmtulong.c
@@ -0,0 +1,191 @@
+/* fmtulong.c -- Convert unsigned long int to string. */
+
+/* Copyright (C) 1998-2011 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef HAVE_CONFIG_H
+#  include <config.h>
+#endif
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#if defined (HAVE_LIMITS_H)
+#  include <limits.h>
+#endif
+
+#include <bashansi.h>
+#ifdef HAVE_STDDEF_H
+#  include <stddef.h>
+#endif
+
+#ifdef HAVE_STDINT_H
+#  include <stdint.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+#  include <inttypes.h>
+#endif
+#include <chartypes.h>
+#include <errno.h>
+
+#include <bashintl.h>
+
+#include "stdc.h"
+
+#include <typemax.h>
+
+#ifndef errno
+extern int errno;
+#endif
+
+#define x_digs  "0123456789abcdef"
+#define X_digs  "0123456789ABCDEF"
+
+/* XXX -- assumes uppercase letters, lowercase letters, and digits are
+   contiguous */
+#define FMTCHAR(x) \
+  ((x) < 10) ? (x) + '0' \
+	     : (((x) < 36) ? (x) - 10 + 'a' \
+			   : (((x) < 62) ? (x) - 36 + 'A' \
+					 : (((x) == 62) ? '@' : '_')))
+
+#ifndef FL_PREFIX
+#  define FL_PREFIX	0x01	/* add 0x, 0X, or 0 prefix as appropriate */
+#  define FL_ADDBASE	0x02	/* add base# prefix to converted value */
+#  define FL_HEXUPPER	0x04	/* use uppercase when converting to hex */
+#  define FL_UNSIGNED	0x08	/* don't add any sign */
+#endif
+
+#ifndef LONG
+#  define LONG	long
+#  define UNSIGNED_LONG unsigned long
+#endif
+
+/* `unsigned long' (or unsigned long long) to string conversion for a given
+   base.  The caller passes the output buffer and the size.  This should
+   check for buffer underflow, but currently does not. */
+char *
+fmtulong (ui, base, buf, len, flags)
+     UNSIGNED_LONG ui;
+     int base;
+     char *buf;
+     size_t len;
+     int flags;
+{
+  char *p;
+  int sign;
+  LONG si;
+
+  if (base == 0)
+    base = 10;
+
+  if (base < 2 || base > 64)
+    {
+#if 1
+      /* XXX - truncation possible with long translation */
+      strncpy (buf, _("invalid base"), len - 1);
+      buf[len-1] = '\0';
+      errno = EINVAL;
+      return (p = buf);
+#else
+      base = 10;
+#endif
+    }
+
+  sign = 0;
+  if ((flags & FL_UNSIGNED) == 0 && (LONG)ui < 0)
+    {
+      ui = -ui;
+      sign = '-';
+    }
+
+  p = buf + len - 2;
+  p[1] = '\0';
+
+  /* handle common cases explicitly */
+  switch (base)
+    {
+    case 10:
+      if (ui < 10)
+	{
+	  *p-- = TOCHAR (ui);
+	  break;
+	}
+      /* Favor signed arithmetic over unsigned arithmetic; it is faster on
+	 many machines. */
+      if ((LONG)ui < 0)
+	{
+	  *p-- = TOCHAR (ui % 10);
+	  si = ui / 10;
+	}
+      else
+        si = ui;
+      do
+	*p-- = TOCHAR (si % 10);
+      while (si /= 10);
+      break;
+
+    case 8:
+      do
+	*p-- = TOCHAR (ui & 7);
+      while (ui >>= 3);
+      break;
+
+    case 16:
+      do
+	*p-- = (flags & FL_HEXUPPER) ? X_digs[ui & 15] : x_digs[ui & 15];
+      while (ui >>= 4);
+      break;
+
+    case 2:
+      do
+	*p-- = TOCHAR (ui & 1);
+      while (ui >>= 1);
+      break;
+
+    default:
+      do
+	*p-- = FMTCHAR (ui % base);
+      while (ui /= base);
+      break;
+    }
+
+  if ((flags & FL_PREFIX) && (base == 8 || base == 16))
+    {
+      if (base == 16)
+	{
+	  *p-- = (flags & FL_HEXUPPER) ? 'X' : 'x';
+	  *p-- = '0';
+	}
+      else if (p[1] != '0')
+	*p-- = '0';
+    }
+  else if ((flags & FL_ADDBASE) && base != 10)
+    {
+      *p-- = '#';
+      *p-- = TOCHAR (base % 10);
+      if (base > 10)
+        *p-- = TOCHAR (base / 10);
+    }
+
+  if (sign)
+    *p-- = '-';
+
+  return (p + 1);
+}
diff --git a/lib/sh/fmtumax.c b/lib/sh/fmtumax.c
new file mode 100644
index 0000000..f2786b5
--- /dev/null
+++ b/lib/sh/fmtumax.c
@@ -0,0 +1,27 @@
+/* fmtumax.c -- Convert uintmax_t to string.  */
+
+/* Copyright (C) 2002 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#define LONG	intmax_t
+#define UNSIGNED_LONG	uintmax_t
+#define fmtulong	fmtumax
+
+#include "fmtulong.c"
diff --git a/lib/sh/fnxform.c b/lib/sh/fnxform.c
new file mode 100644
index 0000000..35d7e73
--- /dev/null
+++ b/lib/sh/fnxform.c
@@ -0,0 +1,199 @@
+/* fnxform - use iconv(3) to transform strings to and from "filename" format */
+
+/* Copyright (C) 2009-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+#include "bashansi.h"
+#include <stdio.h>
+#include "bashtypes.h"
+
+#include "stdc.h"
+#include "bashintl.h"
+#include <xmalloc.h>
+
+#if defined (HAVE_ICONV)
+#  include <iconv.h>
+#endif
+
+#if defined (HAVE_LOCALE_CHARSET)
+extern const char *locale_charset PARAMS((void));
+#else
+extern char *get_locale_var PARAMS((char *));
+#endif
+
+#if defined (HAVE_ICONV)
+static iconv_t conv_fromfs = (iconv_t)-1;
+static iconv_t conv_tofs = (iconv_t)-1;
+
+#define OUTLEN_MAX 4096
+
+static char *outbuf = 0;
+static size_t outlen = 0;
+
+static char *curencoding PARAMS((void));
+static void init_tofs PARAMS((void));
+static void init_fromfs PARAMS((void));
+
+static char *
+curencoding ()
+{
+  char *loc;
+#if defined (HAVE_LOCALE_CHARSET)
+  loc = (char *)locale_charset ();
+  return loc;
+#else
+  char *dot, *mod;
+
+  loc = get_locale_var ("LC_CTYPE");
+  if (loc == 0 || *loc == 0)
+    return "";
+  dot = strchr (loc, '.');
+  if (dot == 0)
+    return loc;
+  mod = strchr (dot, '@');
+  if (mod)
+    *mod = '\0';
+  return ++dot;
+#endif
+}  
+
+static void
+init_tofs ()
+{
+  char *cur;
+
+  cur = curencoding ();
+  conv_tofs = iconv_open ("UTF-8-MAC", cur);
+}
+
+static void
+init_fromfs ()
+{
+  char *cur;
+
+  cur = curencoding ();
+  conv_fromfs = iconv_open (cur, "UTF-8-MAC");
+}
+
+char *
+fnx_tofs (string, len)
+     char *string;
+     size_t len;
+{
+#ifdef MACOSX
+  ICONV_CONST char *inbuf;
+  char *tempbuf;
+  size_t templen;
+  
+  if (conv_tofs == (iconv_t)-1)
+    init_tofs ();
+  if (conv_tofs == (iconv_t)-1)
+    return string;
+
+  /* Free and reallocate outbuf if it's *too* big */
+  if (outlen >= OUTLEN_MAX && len < OUTLEN_MAX - 8)
+    {
+      free (outbuf);
+      outbuf = 0;
+      outlen = 0;
+    }
+
+  inbuf = string;
+  if (outbuf == 0 || outlen < len + 8)
+    {
+      outlen = len + 8;
+      outbuf = outbuf ? xrealloc (outbuf, outlen + 1) : xmalloc (outlen + 1);
+    }
+  tempbuf = outbuf;
+  templen = outlen;
+
+  iconv (conv_tofs, NULL, NULL, NULL, NULL);
+
+  if (iconv (conv_tofs, &inbuf, &len, &tempbuf, &templen) == (size_t)-1)
+    return string;
+
+  *tempbuf = '\0';
+  return outbuf;
+#else
+  return string;
+#endif
+}
+
+char *
+fnx_fromfs (string, len)
+     char *string;
+     size_t len;
+{
+#ifdef MACOSX
+  ICONV_CONST char *inbuf;
+  char *tempbuf;
+  size_t templen;
+
+  if (conv_fromfs == (iconv_t)-1)
+    init_fromfs ();
+  if (conv_fromfs == (iconv_t)-1)
+    return string;
+
+  /* Free and reallocate outbuf if it's *too* big */
+  if (outlen >= OUTLEN_MAX && len < OUTLEN_MAX - 8)
+    {
+      free (outbuf);
+      outbuf = 0;
+      outlen = 0;
+    }
+
+  inbuf = string;
+  if (outbuf == 0 || outlen < (len + 8))
+    {
+      outlen = len + 8;
+      outbuf = outbuf ? xrealloc (outbuf, outlen + 1) : xmalloc (outlen + 1);
+    }
+  tempbuf = outbuf;
+  templen = outlen;
+
+  iconv (conv_fromfs, NULL, NULL, NULL, NULL);
+
+  if (iconv (conv_fromfs, &inbuf, &len, &tempbuf, &templen) == (size_t)-1)
+    return string;
+
+  *tempbuf = '\0';
+  return outbuf;
+#else
+  return string;
+#endif
+}
+
+#else
+char *
+fnx_tofs (string)
+     char *string;
+{
+  return string;
+}
+
+char *
+fnx_fromfs (string)
+     char *string;
+{
+  return string;
+}
+#endif
diff --git a/lib/sh/fpurge.c b/lib/sh/fpurge.c
new file mode 100644
index 0000000..8cd4e36
--- /dev/null
+++ b/lib/sh/fpurge.c
@@ -0,0 +1,232 @@
+/* fpurge - Flushing buffers of a FILE stream. */
+
+/* Copyright (C) 2007-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#include "stdc.h"
+
+#include <stdio.h>
+
+/* Specification.  Same as in ../../externs.h.  */
+#define NEED_FPURGE_DECL
+#if HAVE_FPURGE
+#  define fpurge _bash_fpurge
+#endif
+extern int fpurge PARAMS((FILE *stream));
+
+#if HAVE___FPURGE                   /* glibc >= 2.2, Haiku, Solaris >= 7 */
+# include <stdio_ext.h>
+#endif
+#include <stdlib.h>
+
+/* Inline contents of gnulib:stdio-impl.h */
+
+/* Many stdio implementations have the same logic and therefore can share
+   the same implementation of stdio extension API, except that some fields
+   have different naming conventions, or their access requires some casts.  */
+
+/* BSD stdio derived implementations.  */
+
+#if defined __NetBSD__                         /* NetBSD */
+/* Get __NetBSD_Version__.  */
+# include <sys/param.h>
+#endif
+
+#if defined __sferror || defined __DragonFly__ /* FreeBSD, NetBSD, OpenBSD, DragonFly, MacOS X, Cygwin */
+
+# if defined __DragonFly__          /* DragonFly */
+  /* See <http://www.dragonflybsd.org/cvsweb/src/lib/libc/stdio/priv_stdio.h?rev=HEAD&content-type=text/x-cvsweb-markup>.  */
+#  define fp_ ((struct { struct __FILE_public pub; \
+                         struct { unsigned char *_base; int _size; } _bf; \
+                         void *cookie; \
+                         void *_close; \
+                         void *_read; \
+                         void *_seek; \
+                         void *_write; \
+                         struct { unsigned char *_base; int _size; } _ub; \
+                         int _ur; \
+                         unsigned char _ubuf[3]; \
+                         unsigned char _nbuf[1]; \
+                         struct { unsigned char *_base; int _size; } _lb; \
+                         int _blksize; \
+                         fpos_t _offset; \
+                         /* More fields, not relevant here.  */ \
+                       } *) fp)
+  /* See <http://www.dragonflybsd.org/cvsweb/src/include/stdio.h?rev=HEAD&content-type=text/x-cvsweb-markup>.  */
+#  define _p pub._p
+#  define _flags pub._flags
+#  define _r pub._r
+#  define _w pub._w
+# else
+#  define fp_ fp
+# endif
+
+# if (defined __NetBSD__ && __NetBSD_Version__ >= 105270000) || defined __OpenBSD__ /* NetBSD >= 1.5ZA, OpenBSD */
+  /* See <http://cvsweb.netbsd.org/bsdweb.cgi/src/lib/libc/stdio/fileext.h?rev=HEAD&content-type=text/x-cvsweb-markup>
+     and <http://www.openbsd.org/cgi-bin/cvsweb/src/lib/libc/stdio/fileext.h?rev=HEAD&content-type=text/x-cvsweb-markup> */
+  struct __sfileext
+    {
+      struct  __sbuf _ub; /* ungetc buffer */
+      /* More fields, not relevant here.  */
+    };
+#  define fp_ub ((struct __sfileext *) fp->_ext._base)->_ub
+# else                                         /* FreeBSD, NetBSD <= 1.5Z, DragonFly, MacOS X, Cygwin */
+#  define fp_ub fp_->_ub
+# endif
+
+# define HASUB(fp) (fp_ub._base != NULL)
+
+#endif
+
+/* SystemV derived implementations.  */
+
+#if defined _IOERR
+
+# if defined __sun && defined _LP64 /* Solaris/{SPARC,AMD64} 64-bit */
+#  define fp_ ((struct { unsigned char *_ptr; \
+                         unsigned char *_base; \
+                         unsigned char *_end; \
+                         long _cnt; \
+                         int _file; \
+                         unsigned int _flag; \
+                       } *) fp)
+# else
+#  define fp_ fp
+# endif
+
+# if defined _SCO_DS                /* OpenServer */
+#  define _cnt __cnt
+#  define _ptr __ptr
+#  define _base __base
+#  define _flag __flag
+# endif
+
+#endif
+
+int
+fpurge (FILE *fp)
+{
+#if HAVE___FPURGE                   /* glibc >= 2.2, Haiku, Solaris >= 7 */
+
+  __fpurge (fp);
+  /* The __fpurge function does not have a return value.  */
+  return 0;
+
+#elif HAVE_FPURGE                   /* FreeBSD, NetBSD, OpenBSD, DragonFly, MacOS X, Cygwin 1.7 */
+
+  /* Call the system's fpurge function.  */
+# undef fpurge
+# if !HAVE_DECL_FPURGE
+  extern int fpurge (FILE *);
+# endif
+  int result = fpurge (fp);
+# if defined __sferror || defined __DragonFly__ /* FreeBSD, NetBSD, OpenBSD, DragonFly, MacOS X, Cygwin */
+  if (result == 0)
+    /* Correct the invariants that fpurge broke.
+       <stdio.h> on BSD systems says:
+         "The following always hold: if _flags & __SRD, _w is 0."
+       If this invariant is not fulfilled and the stream is read-write but
+       currently reading, subsequent putc or fputc calls will write directly
+       into the buffer, although they shouldn't be allowed to.  */
+    if ((fp_->_flags & __SRD) != 0)
+      fp_->_w = 0;
+# endif
+  return result;
+
+#else
+
+  /* Most systems provide FILE as a struct and the necessary bitmask in
+     <stdio.h>, because they need it for implementing getc() and putc() as
+     fast macros.  */
+# if defined _IO_ftrylockfile || __GNU_LIBRARY__ == 1 /* GNU libc, BeOS, Haiku, Linux libc5 */
+  fp->_IO_read_end = fp->_IO_read_ptr;
+  fp->_IO_write_ptr = fp->_IO_write_base;
+  /* Avoid memory leak when there is an active ungetc buffer.  */
+  if (fp->_IO_save_base != NULL)
+    {
+      free (fp->_IO_save_base);
+      fp->_IO_save_base = NULL;
+    }
+  return 0;
+# elif defined __sferror || defined __DragonFly__ /* FreeBSD, NetBSD, OpenBSD, DragonFly, MacOS X, Cygwin */
+  fp_->_p = fp_->_bf._base;
+  fp_->_r = 0;
+  fp_->_w = ((fp_->_flags & (__SLBF | __SNBF | __SRD)) == 0 /* fully buffered and not currently reading? */
+	     ? fp_->_bf._size
+	     : 0);
+  /* Avoid memory leak when there is an active ungetc buffer.  */
+  if (fp_ub._base != NULL)
+    {
+      if (fp_ub._base != fp_->_ubuf)
+	free (fp_ub._base);
+      fp_ub._base = NULL;
+    }
+  return 0;
+# elif defined __EMX__              /* emx+gcc */
+  fp->_ptr = fp->_buffer;
+  fp->_rcount = 0;
+  fp->_wcount = 0;
+  fp->_ungetc_count = 0;
+  return 0;
+# elif defined _IOERR || defined __TANDEM    /* AIX, HP-UX, IRIX, OSF/1, Solaris, OpenServer, mingw */
+  fp->_ptr = fp->_base;
+  if (fp->_ptr != NULL)
+    fp->_cnt = 0;
+  return 0;
+# elif defined __UCLIBC__           /* uClibc */
+#  ifdef __STDIO_BUFFERS
+  if (fp->__modeflags & __FLAG_WRITING)
+    fp->__bufpos = fp->__bufstart;
+  else if (fp->__modeflags & (__FLAG_READONLY | __FLAG_READING))
+    fp->__bufpos = fp->__bufread;
+#  endif
+  return 0;
+# elif defined __QNX__              /* QNX */
+  fp->_Rback = fp->_Back + sizeof (fp->_Back);
+  fp->_Rsave = NULL;
+  if (fp->_Mode & 0x2000 /* _MWRITE */)
+    /* fp->_Buf <= fp->_Next <= fp->_Wend */
+    fp->_Next = fp->_Buf;
+  else
+    /* fp->_Buf <= fp->_Next <= fp->_Rend */
+    fp->_Rend = fp->_Next;
+  return 0;
+# elif defined __MINT__             /* Atari FreeMiNT */
+  if (fp->__pushed_back)
+    {
+      fp->__bufp = fp->__pushback_bufp;
+      fp->__pushed_back = 0;
+    }
+  /* Preserve the current file position.  */
+  if (fp->__target != -1)
+    fp->__target += fp->__bufp - fp->__buffer;
+  fp->__bufp = fp->__buffer;
+  /* Nothing in the buffer, next getc is nontrivial.  */
+  fp->__get_limit = fp->__bufp;
+  /* Nothing in the buffer, next putc is nontrivial.  */
+  fp->__put_limit = fp->__buffer;
+  return 0;
+# else
+# warning "Please port gnulib fpurge.c to your platform! Look at the definitions of fflush, setvbuf and ungetc on your system, then report this to bug-gnulib."
+  return 0;
+# endif
+
+#endif
+}
diff --git a/lib/sh/getcwd.c b/lib/sh/getcwd.c
new file mode 100644
index 0000000..d7bd241
--- /dev/null
+++ b/lib/sh/getcwd.c
@@ -0,0 +1,356 @@
+/* getcwd.c -- get pathname of current directory */
+
+/* Copyright (C) 1991 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if !defined (HAVE_GETCWD)
+
+#if !defined (__GNUC__) && !defined (HAVE_ALLOCA_H) && defined (_AIX)
+  #pragma alloca
+#endif /* _AIX && RISC6000 && !__GNUC__ */
+
+#if defined (__QNX__)
+#  undef HAVE_LSTAT
+#endif
+
+#include <bashtypes.h>
+#include <errno.h>
+
+#if defined (HAVE_LIMITS_H)
+#  include <limits.h>
+#endif
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <posixdir.h>
+#include <posixstat.h>
+#include <maxpath.h>
+#include <memalloc.h>
+
+#include <bashansi.h>
+
+#if !defined (D_FILENO_AVAILABLE)
+#  include "command.h"
+#  include "general.h"
+#  include "externs.h"
+#endif
+
+#include <xmalloc.h>
+
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+#if !defined (HAVE_LSTAT)
+#  define lstat stat
+#endif
+
+#if !defined (NULL)
+#  define NULL 0
+#endif
+
+/* If the d_fileno member of a struct dirent doesn't return anything useful,
+   we need to check inode number equivalence the hard way.  Return 1 if
+   the inode corresponding to PATH/DIR is identical to THISINO. */
+#if !defined (D_FILENO_AVAILABLE)
+static int
+_path_checkino (dotp, name, thisino)
+     char *dotp;
+     char *name;
+     ino_t thisino;
+{
+  char *fullpath;
+  int r, e;
+  struct stat st;
+
+  e = errno;
+  fullpath = sh_makepath (dotp, name, MP_RMDOT);
+  if (stat (fullpath, &st) < 0)
+    {
+      errno = e;
+      return 0;
+    }
+  free (fullpath);
+  errno = e;
+  return (st.st_ino == thisino);
+}
+#endif
+    
+/* Get the pathname of the current working directory,
+   and put it in SIZE bytes of BUF.  Returns NULL if the
+   directory couldn't be determined or SIZE was too small.
+   If successful, returns BUF.  In GNU, if BUF is NULL,
+   an array is allocated with `malloc'; the array is SIZE
+   bytes long, unless SIZE <= 0, in which case it is as
+   big as necessary.  */
+#if defined (__STDC__)
+char *
+getcwd (char *buf, size_t size)
+#else /* !__STDC__ */
+char *
+getcwd (buf, size)
+     char *buf;
+     size_t size;
+#endif /* !__STDC__ */
+{
+  static const char dots[]
+    = "../../../../../../../../../../../../../../../../../../../../../../../\
+../../../../../../../../../../../../../../../../../../../../../../../../../../\
+../../../../../../../../../../../../../../../../../../../../../../../../../..";
+  const char *dotp, *dotlist;
+  size_t dotsize;
+  dev_t rootdev, thisdev;
+  ino_t rootino, thisino;
+  char path[PATH_MAX + 1];
+  register char *pathp;
+  char *pathbuf;
+  size_t pathsize;
+  struct stat st;
+  int saved_errno;
+
+  if (buf != NULL && size == 0)
+    {
+      errno = EINVAL;
+      return ((char *)NULL);
+    }
+
+  pathsize = sizeof (path);
+  pathp = &path[pathsize];
+  *--pathp = '\0';
+  pathbuf = path;
+
+  if (stat (".", &st) < 0)
+    return ((char *)NULL);
+  thisdev = st.st_dev;
+  thisino = st.st_ino;
+
+  if (stat ("/", &st) < 0)
+    return ((char *)NULL);
+  rootdev = st.st_dev;
+  rootino = st.st_ino;
+
+  saved_errno = 0;
+
+  dotsize = sizeof (dots) - 1;
+  dotp = &dots[sizeof (dots)];
+  dotlist = dots;
+  while (!(thisdev == rootdev && thisino == rootino))
+    {
+      register DIR *dirstream;
+      register struct dirent *d;
+      dev_t dotdev;
+      ino_t dotino;
+      char mount_point;
+      int namlen;
+
+      /* Look at the parent directory.  */
+      if (dotp == dotlist)
+	{
+	  /* My, what a deep directory tree you have, Grandma.  */
+	  char *new;
+	  if (dotlist == dots)
+	    {
+	      new = (char *)malloc (dotsize * 2 + 1);
+	      if (new == NULL)
+		goto lose;
+	      memcpy (new, dots, dotsize);
+	    }
+	  else
+	    {
+	      new = (char *)realloc ((PTR_T) dotlist, dotsize * 2 + 1);
+	      if (new == NULL)
+		goto lose;
+	    }
+	  memcpy (&new[dotsize], new, dotsize);
+	  dotp = &new[dotsize];
+	  dotsize *= 2;
+	  new[dotsize] = '\0';
+	  dotlist = new;
+	}
+
+      dotp -= 3;
+
+      /* Figure out if this directory is a mount point.  */
+      if (stat (dotp, &st) < 0)
+	goto lose;
+      dotdev = st.st_dev;
+      dotino = st.st_ino;
+      mount_point = dotdev != thisdev;
+
+      /* Search for the last directory.  */
+      dirstream = opendir (dotp);
+      if (dirstream == NULL)
+	goto lose;
+      while ((d = readdir (dirstream)) != NULL)
+	{
+	  if (d->d_name[0] == '.' &&
+	      (d->d_name[1] == '\0' ||
+		(d->d_name[1] == '.' && d->d_name[2] == '\0')))
+	    continue;
+#if defined (D_FILENO_AVAILABLE)
+	  if (mount_point || d->d_fileno == thisino)
+#else
+	  if (mount_point || _path_checkino (dotp, d->d_name, thisino))
+#endif
+	    {
+	      char *name;
+
+	      namlen = D_NAMLEN(d);
+	      name = (char *)
+		alloca (dotlist + dotsize - dotp + 1 + namlen + 1);
+	      memcpy (name, dotp, dotlist + dotsize - dotp);
+	      name[dotlist + dotsize - dotp] = '/';
+	      memcpy (&name[dotlist + dotsize - dotp + 1],
+		      d->d_name, namlen + 1);
+	      if (lstat (name, &st) < 0)
+		{
+#if 0
+		  int save = errno;
+		  (void) closedir (dirstream);
+		  errno = save;
+		  goto lose;
+#else
+		  saved_errno = errno;
+#endif
+		}
+	      if (st.st_dev == thisdev && st.st_ino == thisino)
+		break;
+	    }
+	}
+      if (d == NULL)
+	{
+#if 0
+	  int save = errno;
+#else
+	  int save = errno ? errno : saved_errno;
+#endif
+	  (void) closedir (dirstream);
+	  errno = save;
+	  goto lose;
+	}
+      else
+	{
+	  size_t space;
+
+	  while ((space = pathp - pathbuf) <= namlen)
+	    {
+	      char *new;
+
+	      if (pathbuf == path)
+		{
+		  new = (char *)malloc (pathsize * 2);
+		  if (!new)
+		    goto lose;
+		}
+	      else
+		{
+		  new = (char *)realloc ((PTR_T) pathbuf, (pathsize * 2));
+		  if (!new)
+		    goto lose;
+		  pathp = new + space;
+		}
+	      (void) memcpy (new + pathsize + space, pathp, pathsize - space);
+	      pathp = new + pathsize + space;
+	      pathbuf = new;
+	      pathsize *= 2;
+	    }
+
+	  pathp -= namlen;
+	  (void) memcpy (pathp, d->d_name, namlen);
+	  *--pathp = '/';
+	  (void) closedir (dirstream);
+	}
+
+      thisdev = dotdev;
+      thisino = dotino;
+    }
+
+  if (pathp == &path[sizeof(path) - 1])
+    *--pathp = '/';
+
+  if (dotlist != dots)
+    free ((PTR_T) dotlist);
+
+  {
+    size_t len = pathbuf + pathsize - pathp;
+    if (buf == NULL && size <= 0)
+      size = len;
+
+    if ((size_t) size < len)
+      {
+	errno = ERANGE;
+	goto lose2;
+      }
+    if (buf == NULL)
+      {
+	buf = (char *) malloc (size);
+	if (buf == NULL)
+	  goto lose2;
+      }
+
+    (void) memcpy((PTR_T) buf, (PTR_T) pathp, len);
+  }
+
+  if (pathbuf != path)
+    free (pathbuf);
+
+  return (buf);
+
+ lose:
+  if ((dotlist != dots) && dotlist)
+    {
+      int e = errno;
+      free ((PTR_T) dotlist);
+      errno = e;
+    }
+
+ lose2:
+  if ((pathbuf != path) && pathbuf)
+    {
+      int e = errno;
+      free ((PTR_T) pathbuf);
+      errno = e;
+    }
+  return ((char *)NULL);
+}
+
+#if defined (TEST)
+#  include <stdio.h>
+main (argc, argv)
+     int argc;
+     char **argv;
+{
+  char b[PATH_MAX];
+
+  if (getcwd(b, sizeof(b)))
+    {
+      printf ("%s\n", b);
+      exit (0);
+    }
+  else
+    {
+      perror ("cwd: getcwd");
+      exit (1);
+    }
+}
+#endif /* TEST */
+#endif /* !HAVE_GETCWD */
diff --git a/lib/sh/getenv.c b/lib/sh/getenv.c
new file mode 100644
index 0000000..1e682ae
--- /dev/null
+++ b/lib/sh/getenv.c
@@ -0,0 +1,233 @@
+/* getenv.c - get environment variable value from the shell's variable
+	      list. */
+
+/* Copyright (C) 1997-2002 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (CAN_REDEFINE_GETENV)
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <bashansi.h>
+#include <errno.h>
+#include <shell.h>
+
+#ifndef errno
+extern int errno;
+#endif
+
+extern char **environ;
+
+/* We supply our own version of getenv () because we want library
+   routines to get the changed values of exported variables. */
+
+/* The NeXT C library has getenv () defined and used in the same file.
+   This screws our scheme.  However, Bash will run on the NeXT using
+   the C library getenv (), since right now the only environment variable
+   that we care about is HOME, and that is already defined.  */
+static char *last_tempenv_value = (char *)NULL;
+
+char *
+getenv (name)
+     const char *name;
+{
+  SHELL_VAR *var;
+
+  if (name == 0 || *name == '\0')
+    return ((char *)NULL);
+
+  var = find_tempenv_variable ((char *)name);
+  if (var)
+    {
+      FREE (last_tempenv_value);
+
+      last_tempenv_value = value_cell (var) ? savestring (value_cell (var)) : (char *)NULL;
+      return (last_tempenv_value);
+    }
+  else if (shell_variables)
+    {
+      var = find_variable ((char *)name);
+      if (var && exported_p (var))
+	return (value_cell (var));
+    }
+  else if (environ)
+    {
+      register int i, len;
+
+      /* In some cases, s5r3 invokes getenv() before main(); BSD systems
+	 using gprof also exhibit this behavior.  This means that
+	 shell_variables will be 0 when this is invoked.  We look up the
+	 variable in the real environment in that case. */
+
+      for (i = 0, len = strlen (name); environ[i]; i++)
+	{
+	  if ((STREQN (environ[i], name, len)) && (environ[i][len] == '='))
+	    return (environ[i] + len + 1);
+	}
+    }
+
+  return ((char *)NULL);
+}
+
+/* Some versions of Unix use _getenv instead. */
+char *
+_getenv (name)
+     const char *name;
+{
+  return (getenv (name));
+}
+
+/* SUSv3 says argument is a `char *'; BSD implementations disagree */
+int
+putenv (str)
+#ifndef HAVE_STD_PUTENV
+     const char *str;
+#else
+     char *str;
+#endif
+{
+  SHELL_VAR *var;
+  char *name, *value;
+  int offset;
+
+  if (str == 0 || *str == '\0')
+    {
+      errno = EINVAL;
+      return -1;
+    }
+
+  offset = assignment (str, 0);
+  if (str[offset] != '=')
+    {
+      errno = EINVAL;
+      return -1;
+    }
+  name = savestring (str);
+  name[offset] = 0;
+
+  value = name + offset + 1;
+
+  /* XXX - should we worry about readonly here? */
+  var = bind_variable (name, value, 0);
+  if (var == 0)
+    {
+      errno = EINVAL;
+      return -1;
+    }
+
+  VUNSETATTR (var, att_invisible);
+  VSETATTR (var, att_exported);
+
+  return 0;
+}
+
+#if 0
+int
+_putenv (name)
+#ifndef HAVE_STD_PUTENV
+     const char *name;
+#else
+     char *name;
+#endif
+{
+  return putenv (name);
+}
+#endif
+
+int
+setenv (name, value, rewrite)
+     const char *name;
+     const char *value;
+     int rewrite;
+{
+  SHELL_VAR *var;
+  char *v;
+
+  if (name == 0 || *name == '\0' || strchr (name, '=') != 0)
+    {
+      errno = EINVAL;
+      return -1;
+    }
+
+  var = 0;
+  v = (char *)value;	/* some compilers need explicit cast */
+  /* XXX - should we worry about readonly here? */
+  if (rewrite == 0)
+    var = find_variable (name);
+
+  if (var == 0)
+    var = bind_variable (name, v, 0);
+
+  if (var == 0)
+    return -1;
+
+  VUNSETATTR (var, att_invisible);
+  VSETATTR (var, att_exported);
+
+  return 0;
+}
+
+#if 0
+int
+_setenv (name, value, rewrite)
+     const char *name;
+     const char *value;
+     int rewrite;
+{
+  return setenv (name, value, rewrite);
+}
+#endif
+
+/* SUSv3 says unsetenv returns int; existing implementations (BSD) disagree. */
+
+#ifdef HAVE_STD_UNSETENV
+#define UNSETENV_RETURN(N)	return(N)
+#define UNSETENV_RETTYPE	int
+#else
+#define UNSETENV_RETURN(N)	return
+#define UNSETENV_RETTYPE	void
+#endif
+
+UNSETENV_RETTYPE
+unsetenv (name)
+     const char *name;
+{
+  if (name == 0 || *name == '\0' || strchr (name, '=') != 0)
+    {
+      errno = EINVAL;
+      UNSETENV_RETURN(-1);
+    }
+
+  /* XXX - should we just remove the export attribute here? */
+#if 1
+  unbind_variable (name);
+#else
+  SHELL_VAR *v;
+
+  v = find_variable (name);
+  if (v)
+    VUNSETATTR (v, att_exported);
+#endif
+
+  UNSETENV_RETURN(0);
+}
+#endif /* CAN_REDEFINE_GETENV */
diff --git a/lib/sh/gettimeofday.c b/lib/sh/gettimeofday.c
new file mode 100644
index 0000000..b654c15
--- /dev/null
+++ b/lib/sh/gettimeofday.c
@@ -0,0 +1,35 @@
+/* gettimeofday.c - gettimeofday replacement using time() */
+
+/* Copyright (C) 2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#if !defined (HAVE_GETTIMEOFDAY)
+
+#include "posixtime.h"
+
+/* A version of gettimeofday that just sets tv_sec from time(3) */
+int
+gettimeofday (struct timeval *tv, void *tz)
+{
+  tv->tv_sec = (time_t) time ((time_t *)0);
+  tv->tv_usec = 0;
+  return 0;
+}
+#endif
diff --git a/lib/sh/inet_aton.c b/lib/sh/inet_aton.c
new file mode 100644
index 0000000..e377178
--- /dev/null
+++ b/lib/sh/inet_aton.c
@@ -0,0 +1,214 @@
+/* inet_aton - convert string to numeric IP address */
+
+/* Snagged from GNU C library, version 2.0.3. */
+
+/*
+ * ++Copyright++ 1983, 1990, 1993
+ * -
+ * Copyright (c) 1983, 1990, 1993
+ *    The Regents of the University of California.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ * 	This product includes software developed by the University of
+ * 	California, Berkeley and its contributors.
+ * 4. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * -
+ * Portions Copyright (c) 1993 by Digital Equipment Corporation.
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies, and that
+ * the name of Digital Equipment Corporation not be used in advertising or
+ * publicity pertaining to distribution of the document or software without
+ * specific, written prior permission.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND DIGITAL EQUIPMENT CORP. DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS.   IN NO EVENT SHALL DIGITAL EQUIPMENT
+ * CORPORATION BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
+ * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+ * SOFTWARE.
+ * -
+ * --Copyright--
+ */
+
+#if defined(LIBC_SCCS) && !defined(lint)
+static char sccsid[] = "@(#)inet_addr.c	8.1 (Berkeley) 6/17/93";
+static char rcsid[] = "$Id: inet_addr.c,v 1.5 1996/08/14 03:48:37 drepper Exp $";
+#endif /* LIBC_SCCS and not lint */
+
+#include <config.h>
+
+#if !defined (HAVE_INET_ATON) && defined (HAVE_NETWORK) && defined (HAVE_NETINET_IN_H) && defined (HAVE_ARPA_INET_H)
+
+#include <sys/types.h>
+#if defined (HAVE_SYS_PARAM_H)
+#include <sys/param.h>
+#endif
+#include <netinet/in.h>
+#include <arpa/inet.h>
+
+#ifdef HAVE_UNISTD_H
+#  include <unistd.h>
+#endif
+
+#include <bashansi.h>
+#include <ctype.h>
+#include <stdc.h>
+
+#ifndef INADDR_NONE
+#  define INADDR_NONE 0xffffffff
+#endif
+
+/* these are compatibility routines, not needed on recent BSD releases */
+
+#if 0
+/* Not used, not needed. */
+/*
+ * Ascii internet address interpretation routine.
+ * The value returned is in network order.
+ */
+u_long
+inet_addr(cp)
+	register const char *cp;
+{
+	struct in_addr val;
+
+	if (inet_aton(cp, &val))
+		return (val.s_addr);
+	return (INADDR_NONE);
+}
+#endif
+
+/*
+ * Check whether "cp" is a valid ascii representation
+ * of an Internet address and convert to a binary address.
+ * Returns 1 if the address is valid, 0 if not.
+ * This replaces inet_addr, the return value from which
+ * cannot distinguish between failure and a local broadcast address.
+ */
+int
+inet_aton(cp, addr)
+	register const char *cp;
+	struct in_addr *addr;
+{
+	register u_bits32_t val;
+	register int base, n;
+	register unsigned char c;
+	u_int parts[4];
+	register u_int *pp = parts;
+
+	c = *cp;
+	for (;;) {
+		/*
+		 * Collect number up to ``.''.
+		 * Values are specified as for C:
+		 * 0x=hex, 0=octal, isdigit=decimal.
+		 */
+#if 0
+		if (!isdigit(c))
+#else
+		if (c != '0' && c != '1' && c != '2' && c != '3' && c != '4' &&
+		    c != '5' && c != '6' && c != '7' && c != '8' && c != '9')
+#endif
+			return (0);
+		val = 0; base = 10;
+		if (c == '0') {
+			c = *++cp;
+			if (c == 'x' || c == 'X')
+				base = 16, c = *++cp;
+			else
+				base = 8;
+		}
+		for (;;) {
+			if (isascii(c) && isdigit(c)) {
+				val = (val * base) + (c - '0');
+				c = *++cp;
+			} else if (base == 16 && isascii(c) && isxdigit(c)) {
+				val = (val << 4) |
+					(c + 10 - (islower(c) ? 'a' : 'A'));
+				c = *++cp;
+			} else
+				break;
+		}
+		if (c == '.') {
+			/*
+			 * Internet format:
+			 *	a.b.c.d
+			 *	a.b.c	(with c treated as 16 bits)
+			 *	a.b	(with b treated as 24 bits)
+			 */
+			if (pp >= parts + 3)
+				return (0);
+			*pp++ = val;
+			c = *++cp;
+		} else
+			break;
+	}
+	/*
+	 * Check for trailing characters.
+	 */
+	if (c != '\0' && (!isascii(c) || !isspace(c)))
+		return (0);
+	/*
+	 * Concoct the address according to
+	 * the number of parts specified.
+	 */
+	n = pp - parts + 1;
+	switch (n) {
+
+	case 0:
+		return (0);		/* initial nondigit */
+
+	case 1:				/* a -- 32 bits */
+		break;
+
+	case 2:				/* a.b -- 8.24 bits */
+		if (val > 0xffffff)
+			return (0);
+		val |= parts[0] << 24;
+		break;
+
+	case 3:				/* a.b.c -- 8.8.16 bits */
+		if (val > 0xffff)
+			return (0);
+		val |= (parts[0] << 24) | (parts[1] << 16);
+		break;
+
+	case 4:				/* a.b.c.d -- 8.8.8.8 bits */
+		if (val > 0xff)
+			return (0);
+		val |= (parts[0] << 24) | (parts[1] << 16) | (parts[2] << 8);
+		break;
+	}
+	if (addr)
+		addr->s_addr = htonl(val);
+	return (1);
+}
+
+#endif /* !HAVE_INET_ATON */
diff --git a/lib/sh/input_avail.c b/lib/sh/input_avail.c
new file mode 100644
index 0000000..695165f
--- /dev/null
+++ b/lib/sh/input_avail.c
@@ -0,0 +1,165 @@
+/* input_avail.c -- check whether or not data is available for reading on a
+		    specified file descriptor. */
+
+/* Copyright (C) 2008,2009-2019 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if defined (__TANDEM)
+#  include <floss.h>
+#endif
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <sys/types.h>
+#include <fcntl.h>
+#if defined (HAVE_SYS_FILE_H)
+#  include <sys/file.h>
+#endif /* HAVE_SYS_FILE_H */
+
+#if defined (HAVE_PSELECT)
+#  include <signal.h>
+#endif
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif /* HAVE_UNISTD_H */
+
+#include "bashansi.h"
+
+#include "posixselect.h"
+
+#if defined (FIONREAD_IN_SYS_IOCTL)
+#  include <sys/ioctl.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+#if !defined (O_NDELAY) && defined (O_NONBLOCK)
+#  define O_NDELAY O_NONBLOCK	/* Posix style */
+#endif
+
+/* Return >= 1 if select/FIONREAD indicates data available for reading on
+   file descriptor FD; 0 if no data available.  Return -1 on error. */
+int
+input_avail (fd)
+     int fd;
+{
+  int result, chars_avail;
+#if defined(HAVE_SELECT)
+  fd_set readfds, exceptfds;
+  struct timeval timeout;
+#endif
+
+  if (fd < 0)
+    return -1;
+
+  chars_avail = 0;
+
+#if defined (HAVE_SELECT)
+  FD_ZERO (&readfds);
+  FD_ZERO (&exceptfds);
+  FD_SET (fd, &readfds);
+  FD_SET (fd, &exceptfds);
+  timeout.tv_sec = 0;
+  timeout.tv_usec = 0;
+  result = select (fd + 1, &readfds, (fd_set *)NULL, &exceptfds, &timeout);
+  return ((result <= 0) ? 0 : 1);
+#endif
+
+#if defined (FIONREAD)
+  errno = 0;
+  result = ioctl (fd, FIONREAD, &chars_avail);
+  if (result == -1 && errno == EIO)
+    return -1;
+  return (chars_avail);
+#endif
+
+  return 0;
+}
+
+/* Wait until NCHARS are available for reading on file descriptor FD.
+   This can wait indefinitely. Return -1 on error. */
+int
+nchars_avail (fd, nchars)
+     int fd;
+     int nchars;
+{
+  int result, chars_avail;
+#if defined(HAVE_SELECT)
+  fd_set readfds, exceptfds;
+#endif
+#if defined (HAVE_PSELECT)
+  sigset_t set, oset;
+#endif
+
+  if (fd < 0 || nchars < 0)
+    return -1;
+  if (nchars == 0)
+    return (input_avail (fd));
+
+  chars_avail = 0;
+
+#if defined (HAVE_SELECT)
+  FD_ZERO (&readfds);
+  FD_ZERO (&exceptfds);
+  FD_SET (fd, &readfds);
+  FD_SET (fd, &exceptfds);
+#endif
+#if defined (HAVE_SELECT) || defined (HAVE_PSELECT)
+  sigprocmask (SIG_BLOCK, (sigset_t *)NULL, &set);
+#  ifdef SIGCHLD
+  sigaddset (&set, SIGCHLD);
+#  endif
+  sigemptyset (&oset);
+#endif
+
+  while (1)
+    {
+      result = 0;
+#if defined (HAVE_PSELECT)
+      /* XXX - use pselect(2) to block SIGCHLD atomically */
+      result = pselect (fd + 1, &readfds, (fd_set *)NULL, &exceptfds, (struct timespec *)NULL, &set);
+#elif defined (HAVE_SELECT)
+      sigprocmask (SIG_BLOCK, &set, &oset);
+      result = select (fd + 1, &readfds, (fd_set *)NULL, &exceptfds, (struct timeval *)NULL);
+      sigprocmask (SIG_BLOCK, &oset, (sigset_t *)NULL);
+#endif
+      if (result < 0)
+        return -1;
+
+#if defined (FIONREAD)
+      errno = 0;
+      result = ioctl (fd, FIONREAD, &chars_avail);
+      if (result == -1 && errno == EIO)
+        return -1;
+      if (chars_avail >= nchars)
+        break;
+#else
+      break;
+#endif
+    }
+
+  return 0;
+}
diff --git a/lib/sh/itos.c b/lib/sh/itos.c
new file mode 100644
index 0000000..cd36ef3
--- /dev/null
+++ b/lib/sh/itos.c
@@ -0,0 +1,84 @@
+/* itos.c -- Convert integer to string. */
+
+/* Copyright (C) 1998-2002 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef HAVE_CONFIG_H
+#  include <config.h>
+#endif
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <bashansi.h>
+#include "shell.h"
+
+char *
+inttostr (i, buf, len)
+     intmax_t i;
+     char *buf;
+     size_t len;
+{
+  return (fmtumax (i, 10, buf, len, 0));
+}
+
+/* Integer to string conversion.  This conses the string; the
+   caller should free it. */
+char *
+itos (i)
+     intmax_t i;
+{
+  char *p, lbuf[INT_STRLEN_BOUND(intmax_t) + 1];
+
+  p = fmtumax (i, 10, lbuf, sizeof(lbuf), 0);
+  return (savestring (p));
+}
+
+/* Integer to string conversion.  This conses the string using strdup;
+   caller should free it and be prepared to deal with NULL return. */
+char *
+mitos (i)
+     intmax_t i;
+{
+  char *p, lbuf[INT_STRLEN_BOUND(intmax_t) + 1];
+
+  p = fmtumax (i, 10, lbuf, sizeof(lbuf), 0);
+  return (strdup (p));
+}
+
+char *
+uinttostr (i, buf, len)
+     uintmax_t i;
+     char *buf;
+     size_t len;
+{
+  return (fmtumax (i, 10, buf, len, FL_UNSIGNED));
+}
+
+/* Integer to string conversion.  This conses the string; the
+   caller should free it. */
+char *
+uitos (i)
+     uintmax_t i;
+{
+  char *p, lbuf[INT_STRLEN_BOUND(uintmax_t) + 1];
+
+  p = fmtumax (i, 10, lbuf, sizeof(lbuf), FL_UNSIGNED);
+  return (savestring (p));
+}
diff --git a/lib/sh/mailstat.c b/lib/sh/mailstat.c
new file mode 100644
index 0000000..bd5c25f
--- /dev/null
+++ b/lib/sh/mailstat.c
@@ -0,0 +1,159 @@
+/* mailstat.c -- stat a mailbox file, handling maildir-type mail directories */
+
+/* Copyright (C) 2001 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+ 
+#include <stdio.h>
+#include <errno.h>
+
+#include <bashtypes.h>
+#include <posixstat.h>
+#include <posixdir.h>
+#include <bashansi.h>
+
+#if defined (HAVE_SYS_PARAM_H)
+#  include <sys/param.h>
+#endif
+
+#include <maxpath.h>
+
+/*
+ *     Stat a file. If it's a maildir, check all messages
+ *     in the maildir and present the grand total as a file.
+ *     The fields in the 'struct stat' are from the mail directory.
+ *     The following fields are emulated:
+ *
+ *     st_nlink	always 1, unless st_blocks is not present, in which case it's
+ *		the total number of messages
+ *     st_size	 total number of bytes in all files
+ *     st_blocks       total number of messages, if present in struct stat
+ *     st_atime	access time of newest file in maildir
+ *     st_mtime	modify time of newest file in maildir
+ *     st_mode	 S_IFDIR changed to S_IFREG
+ *
+ *     This is good enough for most mail-checking applications.
+ */
+
+int
+mailstat(path, st)
+     const char *path;
+     struct stat *st;
+{
+  static struct stat st_new_last, st_ret_last;
+  struct stat st_ret, st_tmp;
+  DIR *dd;
+  struct dirent *fn;
+  char dir[PATH_MAX * 2], file[PATH_MAX * 2 + 1];
+  int i, l;
+  time_t atime, mtime;
+
+  atime = mtime = 0;
+
+  /* First see if it's a directory. */
+  if ((i = stat(path, st)) != 0 || S_ISDIR(st->st_mode) == 0)
+    return i;
+
+  if (strlen(path) > sizeof(dir) - 5)
+    {
+#ifdef ENAMETOOLONG
+      errno = ENAMETOOLONG;
+#else
+      errno = EINVAL;
+#endif
+      return -1;
+    }
+
+  st_ret = *st;
+  st_ret.st_nlink = 1;
+  st_ret.st_size  = 0;
+#ifdef HAVE_STRUCT_STAT_ST_BLOCKS
+  st_ret.st_blocks  = 0;
+#else
+  st_ret.st_nlink = 0;
+#endif
+  st_ret.st_mode  &= ~S_IFDIR;
+  st_ret.st_mode  |= S_IFREG;
+
+  /* See if cur/ is present */
+  sprintf(dir, "%s/cur", path);
+  if (stat(dir, &st_tmp) || S_ISDIR(st_tmp.st_mode) == 0)
+    return 0;
+  st_ret.st_atime = st_tmp.st_atime;
+
+  /* See if tmp/ is present */
+  sprintf(dir, "%s/tmp", path);
+  if (stat(dir, &st_tmp) || S_ISDIR(st_tmp.st_mode) == 0)
+    return 0;
+  st_ret.st_mtime = st_tmp.st_mtime;
+
+  /* And new/ */
+  sprintf(dir, "%s/new", path);
+  if (stat(dir, &st_tmp) || S_ISDIR(st_tmp.st_mode) == 0)
+    return 0;
+  st_ret.st_mtime = st_tmp.st_mtime;
+
+  /* Optimization - if new/ didn't change, nothing else did. */
+  if (st_tmp.st_dev == st_new_last.st_dev &&
+      st_tmp.st_ino == st_new_last.st_ino &&
+      st_tmp.st_atime == st_new_last.st_atime &&
+      st_tmp.st_mtime == st_new_last.st_mtime)
+    {
+      *st = st_ret_last;
+      return 0;
+    }
+  st_new_last = st_tmp;
+
+  /* Loop over new/ and cur/ */
+  for (i = 0; i < 2; i++)
+    {
+      sprintf(dir, "%s/%s", path, i ? "cur" : "new");
+      sprintf(file, "%s/", dir);
+      l = strlen(file);
+      if ((dd = opendir(dir)) == NULL)
+	return 0;
+      while ((fn = readdir(dd)) != NULL)
+	{
+	  if (fn->d_name[0] == '.' || strlen(fn->d_name) + l >= sizeof(file))
+	    continue;
+	  strcpy(file + l, fn->d_name);
+	  if (stat(file, &st_tmp) != 0)
+	    continue;
+	  st_ret.st_size += st_tmp.st_size;
+#ifdef HAVE_STRUCT_STAT_ST_BLOCKS
+	  st_ret.st_blocks++;
+#else
+	  st_ret.st_nlink++;
+#endif
+	  if (st_tmp.st_atime != st_tmp.st_mtime && st_tmp.st_atime > atime)
+	    atime = st_tmp.st_atime;
+	  if (st_tmp.st_mtime > mtime)
+	    mtime = st_tmp.st_mtime;
+	}
+      closedir(dd);
+    }
+
+/*  if (atime) */	/* Set atime even if cur/ is empty */
+      st_ret.st_atime = atime;
+    if (mtime)
+      st_ret.st_mtime = mtime;
+
+    *st = st_ret_last = st_ret;
+    return 0;
+}
diff --git a/lib/sh/makepath.c b/lib/sh/makepath.c
new file mode 100644
index 0000000..ab46c96
--- /dev/null
+++ b/lib/sh/makepath.c
@@ -0,0 +1,128 @@
+/* makepath.c - glue PATH and DIR together into a full pathname. */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include <bashansi.h>
+#include "shell.h"
+
+#include <tilde/tilde.h>
+
+#ifndef NULL
+#  define NULL 0
+#endif
+
+/* MAKE SURE THESE AGREE WITH ../../externs.h. */
+
+#ifndef MP_DOTILDE
+#  define MP_DOTILDE	0x01
+#  define MP_DOCWD	0x02
+#  define MP_RMDOT	0x04
+#  define MP_IGNDOT	0x08
+#endif
+
+extern char *get_working_directory PARAMS((char *));
+
+static char *nullpath = "";
+
+/* Take PATH, an element from, e.g., $CDPATH, and DIR, a directory name,
+   and paste them together into PATH/DIR.  Tilde expansion is performed on
+   PATH if (flags & MP_DOTILDE) is non-zero.  If PATH is NULL or the empty
+   string, it is converted to the current directory.  A full pathname is
+   used if (flags & MP_DOCWD) is non-zero, otherwise `./' is used.  If
+   (flags & MP_RMDOT) is non-zero, any `./' is removed from the beginning
+   of DIR.  If (flags & MP_IGNDOT) is non-zero, a PATH that is "." or "./"
+   is ignored. */
+
+#define MAKEDOT() \
+  do { \
+    xpath = (char *)xmalloc (2); \
+    xpath[0] = '.'; \
+    xpath[1] = '\0'; \
+    pathlen = 1; \
+  } while (0)
+
+char *
+sh_makepath (path, dir, flags)
+     const char *path, *dir;
+     int flags;
+{
+  int dirlen, pathlen;
+  char *ret, *xpath, *xdir, *r, *s;
+
+  if (path == 0 || *path == '\0')
+    {
+      if (flags & MP_DOCWD)
+	{
+	  xpath = get_working_directory ("sh_makepath");
+	  if (xpath == 0)
+	    {
+	      ret = get_string_value ("PWD");
+	      if (ret)
+		xpath = savestring (ret);
+	    }
+	  if (xpath == 0)
+	    MAKEDOT();
+	  else
+	    pathlen = strlen (xpath);
+	}
+      else
+	MAKEDOT();
+    }
+  else if ((flags & MP_IGNDOT) && path[0] == '.' && (path[1] == '\0' ||
+						     (path[1] == '/' && path[2] == '\0')))
+    {
+      xpath = nullpath;
+      pathlen = 0;
+    }
+  else
+    {
+      xpath = ((flags & MP_DOTILDE) && *path == '~') ? bash_tilde_expand (path, 0) : (char *)path;
+      pathlen = strlen (xpath);
+    }
+
+  xdir = (char *)dir;
+  dirlen = strlen (xdir);
+  if ((flags & MP_RMDOT) && dir[0] == '.' && dir[1] == '/')
+    {
+      xdir += 2;
+      dirlen -= 2;
+    }
+
+  r = ret = (char *)xmalloc (2 + dirlen + pathlen);
+  s = xpath;
+  while (*s)
+    *r++ = *s++;
+  if (s > xpath && s[-1] != '/')
+    *r++ = '/';      
+  s = xdir;
+  while (*r++ = *s++)
+    ;
+  if (xpath != path && xpath != nullpath)
+    free (xpath);
+  return (ret);
+}
diff --git a/lib/sh/mbscasecmp.c b/lib/sh/mbscasecmp.c
new file mode 100644
index 0000000..0ab9560
--- /dev/null
+++ b/lib/sh/mbscasecmp.c
@@ -0,0 +1,79 @@
+/* mbscasecmp - case-insensitive multibyte string comparison. */
+
+/* Copyright (C) 2009-2015 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if !defined (HAVE_MBSCASECMP) && defined (HANDLE_MULTIBYTE)
+
+#include <stdlib.h>
+#include <stddef.h>
+#include <string.h>
+
+#include <wchar.h>
+#include <wctype.h>
+
+/* Compare MBS1 and MBS2 without regard to case.  */
+int
+mbscasecmp (mbs1, mbs2)
+    const char *mbs1;
+    const char *mbs2;
+{
+  int len1, len2, mb_cur_max;
+  wchar_t c1, c2, l1, l2;
+
+  len1 = len2 = 0;
+  /* Reset multibyte characters to their initial state.	 */
+  (void) mblen ((char *) NULL, 0);
+
+  mb_cur_max = MB_CUR_MAX;
+  do
+    {
+      len1 = mbtowc (&c1, mbs1, mb_cur_max);
+      len2 = mbtowc (&c2, mbs2, mb_cur_max);
+
+      if (len1 == 0)
+	return len2 == 0 ? 0 : -1;
+      else if (len2 == 0)
+	return 1;
+      else if (len1 > 0 && len2 < 0)
+        return -1;
+      else if (len1 < 0 && len2 > 0)
+        return 1;
+      else if (len1 < 0 && len2 < 0)
+	{
+	  len1 = strlen (mbs1);
+	  len2 = strlen (mbs2);
+	  return (len1 == len2 ? memcmp (mbs1, mbs2, len1)
+			       : ((len1 < len2) ? (memcmp (mbs1, mbs2, len1) > 0 ? 1 : -1)
+						: (memcmp (mbs1, mbs2, len2) >= 0 ? 1 : -1)));
+	}
+
+      l1 = towlower (c1);
+      l2 = towlower (c2);
+ 
+      mbs1 += len1;
+      mbs2 += len2;
+    }
+  while (l1 == l2);
+
+  return l1 - l2;
+}
+
+#endif
diff --git a/lib/sh/mbschr.c b/lib/sh/mbschr.c
new file mode 100644
index 0000000..639962d
--- /dev/null
+++ b/lib/sh/mbschr.c
@@ -0,0 +1,91 @@
+/* mbschr.c - strchr(3) that handles multibyte characters. */
+
+/* Copyright (C) 2002 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+#endif
+
+#include "bashansi.h"
+#include "shmbutil.h"
+
+extern int locale_mb_cur_max;
+extern int locale_utf8locale;
+
+#undef mbschr
+
+extern char *utf8_mbschr (const char *, int);	/* XXX */
+
+/* In some locales, the non-first byte of some multibyte characters have
+   the same value as some ascii character.  Faced with these strings, a
+   legacy strchr() might return the wrong value. */
+
+char *
+#if defined (PROTOTYPES)
+mbschr (const char *s, int c)
+#else
+mbschr (s, c)
+     const char *s;
+     int c;
+#endif
+{
+#if HANDLE_MULTIBYTE
+  char *pos;
+  mbstate_t state;
+  size_t strlength, mblength;
+
+  if (locale_utf8locale && c < 0x80)
+    return (utf8_mbschr (s, c));		/* XXX */
+
+  /* The locale encodings with said weird property are BIG5, BIG5-HKSCS,
+     GBK, GB18030, SHIFT_JIS, and JOHAB.  They exhibit the problem only
+     when c >= 0x30.  We can therefore use the faster bytewise search if
+     c <= 0x30. */
+  if ((unsigned char)c >= '0' && locale_mb_cur_max > 1)
+    {
+      pos = (char *)s;
+      memset (&state, '\0', sizeof(mbstate_t));
+      strlength = strlen (s);
+
+      while (strlength > 0)
+	{
+	  if (is_basic (*pos))
+	    mblength = 1;
+	  else
+	    {
+	      mblength = mbrlen (pos, strlength, &state);
+	      if (mblength == (size_t)-2 || mblength == (size_t)-1 || mblength == (size_t)0)
+	        mblength = 1;
+	    }
+
+	  if (mblength == 1 && c == (unsigned char)*pos)
+	    return pos;
+
+	  strlength -= mblength;
+	  pos += mblength;
+	}
+
+      return ((char *)NULL);
+    }
+  else
+#endif
+  return (strchr (s, c));
+}
diff --git a/lib/sh/mbscmp.c b/lib/sh/mbscmp.c
new file mode 100644
index 0000000..c7c8443
--- /dev/null
+++ b/lib/sh/mbscmp.c
@@ -0,0 +1,77 @@
+/* mbscmp - multibyte string comparison. */
+
+/* Copyright (C) 1995-2018 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if !defined (HAVE_MBSCMP) && defined (HANDLE_MULTIBYTE)
+
+#include <stdlib.h>
+#include <stddef.h>
+#include <string.h>
+
+extern int locale_utf8locale;
+
+extern int utf8_mbscmp (const char *, const char *);
+
+/* Compare MBS1 and MBS2.  */
+int
+mbscmp (mbs1, mbs2)
+    const char *mbs1;
+    const char *mbs2;
+{
+  int len1, len2, mb_cur_max;
+  wchar_t c1, c2;
+
+  len1 = len2 = 0;
+  /* Reset multibyte characters to their initial state.	 */
+  (void) mblen ((char *) NULL, 0);
+
+  mb_cur_max = MB_CUR_MAX;
+  do
+    {
+      len1 = mbtowc (&c1, mbs1, mb_cur_max);
+      len2 = mbtowc (&c2, mbs2, mb_cur_max);
+
+      if (len1 == 0)
+	return len2 == 0 ? 0 : -1;
+      else if (len2 == 0)
+	return 1;
+      else if (len1 > 0 && len2 < 0)
+        return -1;
+      else if (len1 < 0 && len2 > 0)
+        return 1;
+      else if (len1 < 0 && len2 < 0)
+	{
+	  len1 = strlen (mbs1);
+	  len2 = strlen (mbs2);
+	  return (len1 == len2 ? memcmp (mbs1, mbs2, len1)
+			       : ((len1 < len2) ? (memcmp (mbs1, mbs2, len1) > 0 ? 1 : -1)
+						: (memcmp (mbs1, mbs2, len2) >= 0 ? 1 : -1)));
+	}
+
+      mbs1 += len1;
+      mbs2 += len2;
+    }
+  while (c1 == c2);
+
+  return c1 - c2;
+}
+
+#endif
diff --git a/lib/sh/memset.c b/lib/sh/memset.c
new file mode 100644
index 0000000..4ebc418
--- /dev/null
+++ b/lib/sh/memset.c
@@ -0,0 +1,29 @@
+/* memset.c -- set an area of memory to a given value */
+
+/* Copyright (C) 1991-2002 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+char *
+memset (char *str, int c, unsigned int len)
+{
+  register char *st = str;
+
+  while (len-- > 0)
+    *st++ = c;
+  return str;
+}
diff --git a/lib/sh/mktime.c b/lib/sh/mktime.c
new file mode 100644
index 0000000..9ee675b
--- /dev/null
+++ b/lib/sh/mktime.c
@@ -0,0 +1,438 @@
+/* mktime - convert struct tm to a time_t value */
+
+/* Copyright (C) 1993-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+   Contributed by Paul Eggert (eggert@twinsun.com).
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+/* Define this to have a standalone program to test this implementation of
+   mktime.  */
+/* #define DEBUG 1 */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#ifdef _LIBC
+# define HAVE_LIMITS_H 1
+# define HAVE_LOCALTIME_R 1
+# define STDC_HEADERS 1
+#endif
+
+/* Assume that leap seconds are possible, unless told otherwise.
+   If the host has a `zic' command with a `-L leapsecondfilename' option,
+   then it supports leap seconds; otherwise it probably doesn't.  */
+#ifndef LEAP_SECONDS_POSSIBLE
+#define LEAP_SECONDS_POSSIBLE 1
+#endif
+
+#ifndef VMS
+#include <sys/types.h>		/* Some systems define `time_t' here.  */
+#endif
+#include <time.h>
+
+#if HAVE_LIMITS_H
+#include <limits.h>
+#endif
+
+#include "bashansi.h"
+
+#if DEBUG_MKTIME
+#include <stdio.h>
+/* Make it work even if the system's libc has its own mktime routine.  */
+#define mktime my_mktime
+#endif /* DEBUG_MKTIME */
+
+#ifndef PARAMS
+#if defined (__GNUC__) || (defined (__STDC__) && __STDC__)
+#define PARAMS(args) args
+#else
+#define PARAMS(args) ()
+#endif  /* GCC.  */
+#endif  /* Not PARAMS.  */
+
+#ifndef CHAR_BIT
+#define CHAR_BIT 8
+#endif
+
+#ifndef INT_MIN
+#define INT_MIN (~0 << (sizeof (int) * CHAR_BIT - 1))
+#endif
+#ifndef INT_MAX
+#define INT_MAX (~0 - INT_MIN)
+#endif
+
+/* True if the arithmetic type T is signed.  */
+#define TYPE_SIGNED(t) (! ((t) 0 < (t) -1))
+
+/* The maximum and minimum values for the integer type T.  These
+   macros have undefined behavior if T is signed and has padding bits.
+   If this is a problem for you, please let us know how to fix it for
+   your host.  */
+#define TYPE_MINIMUM(t) \
+  ((t) (! TYPE_SIGNED (t) \
+	? (t) 0 \
+	: ~ TYPE_MAXIMUM (t)))
+#define TYPE_MAXIMUM(t) \
+  ((t) (! TYPE_SIGNED (t) \
+	? (t) -1 \
+	: ((((t) 1 << (sizeof (t) * CHAR_BIT - 2)) - 1) * 2 + 1)))
+                  
+#ifndef TIME_T_MIN
+# define TIME_T_MIN TYPE_MINIMUM (time_t)
+#endif
+#ifndef TIME_T_MAX
+# define TIME_T_MAX TYPE_MAXIMUM (time_t)
+#endif
+
+#define TM_YEAR_BASE 1900
+#define EPOCH_YEAR 1970
+
+#ifndef __isleap
+/* Nonzero if YEAR is a leap year (every 4 years,
+   except every 100th isn't, and every 400th is).  */
+#define	__isleap(year)	\
+  ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
+#endif
+
+/* How many days come before each month (0-12).  */
+const unsigned short int __mon_yday[2][13] =
+  {
+    /* Normal years.  */
+    { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365 },
+    /* Leap years.  */
+    { 0, 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335, 366 }
+  };
+
+static time_t ydhms_tm_diff PARAMS ((int, int, int, int, int, const struct tm *));
+time_t __mktime_internal PARAMS ((struct tm *,
+			       struct tm *(*) (const time_t *, struct tm *),
+			       time_t *));
+
+
+static struct tm *my_localtime_r PARAMS ((const time_t *, struct tm *));
+static struct tm *
+my_localtime_r (t, tp)
+     const time_t *t;
+     struct tm *tp;
+{
+  struct tm *l = localtime (t);
+  if (! l)
+    return 0;
+  *tp = *l;
+  return tp;
+}
+
+
+/* Yield the difference between (YEAR-YDAY HOUR:MIN:SEC) and (*TP),
+   measured in seconds, ignoring leap seconds.
+   YEAR uses the same numbering as TM->tm_year.
+   All values are in range, except possibly YEAR.
+   If overflow occurs, yield the low order bits of the correct answer.  */
+static time_t
+ydhms_tm_diff (year, yday, hour, min, sec, tp)
+     int year, yday, hour, min, sec;
+     const struct tm *tp;
+{
+  /* Compute intervening leap days correctly even if year is negative.
+     Take care to avoid int overflow.  time_t overflow is OK, since
+     only the low order bits of the correct time_t answer are needed.
+     Don't convert to time_t until after all divisions are done, since
+     time_t might be unsigned.  */
+  int a4 = (year >> 2) + (TM_YEAR_BASE >> 2) - ! (year & 3);
+  int b4 = (tp->tm_year >> 2) + (TM_YEAR_BASE >> 2) - ! (tp->tm_year & 3);
+  int a100 = a4 / 25 - (a4 % 25 < 0);
+  int b100 = b4 / 25 - (b4 % 25 < 0);
+  int a400 = a100 >> 2;
+  int b400 = b100 >> 2;
+  int intervening_leap_days = (a4 - b4) - (a100 - b100) + (a400 - b400);
+  time_t years = year - (time_t) tp->tm_year;
+  time_t days = (365 * years + intervening_leap_days
+		 + (yday - tp->tm_yday));
+  return (60 * (60 * (24 * days + (hour - tp->tm_hour))
+		+ (min - tp->tm_min))
+	  + (sec - tp->tm_sec));
+}
+
+
+static time_t localtime_offset;
+
+/* Convert *TP to a time_t value.  */
+time_t
+mktime (tp)
+     struct tm *tp;
+{
+#ifdef _LIBC
+  /* POSIX.1 8.1.1 requires that whenever mktime() is called, the
+     time zone names contained in the external variable `tzname' shall
+     be set as if the tzset() function had been called.  */
+  __tzset ();
+#endif
+
+  return __mktime_internal (tp, my_localtime_r, &localtime_offset);
+}
+
+/* Convert *TP to a time_t value, inverting
+   the monotonic and mostly-unit-linear conversion function CONVERT.
+   Use *OFFSET to keep track of a guess at the offset of the result,
+   compared to what the result would be for UTC without leap seconds.
+   If *OFFSET's guess is correct, only one CONVERT call is needed.  */
+time_t
+__mktime_internal (tp, convert, offset)
+     struct tm *tp;
+     struct tm *(*convert) PARAMS ((const time_t *, struct tm *));
+     time_t *offset;
+{
+  time_t t, dt, t0;
+  struct tm tm;
+
+  /* The maximum number of probes (calls to CONVERT) should be enough
+     to handle any combinations of time zone rule changes, solar time,
+     and leap seconds.  Posix.1 prohibits leap seconds, but some hosts
+     have them anyway.  */
+  int remaining_probes = 4;
+
+  /* Time requested.  Copy it in case CONVERT modifies *TP; this can
+     occur if TP is localtime's returned value and CONVERT is localtime.  */
+  int sec = tp->tm_sec;
+  int min = tp->tm_min;
+  int hour = tp->tm_hour;
+  int mday = tp->tm_mday;
+  int mon = tp->tm_mon;
+  int year_requested = tp->tm_year;
+  int isdst = tp->tm_isdst;
+
+  /* Ensure that mon is in range, and set year accordingly.  */
+  int mon_remainder = mon % 12;
+  int negative_mon_remainder = mon_remainder < 0;
+  int mon_years = mon / 12 - negative_mon_remainder;
+  int year = year_requested + mon_years;
+
+  /* The other values need not be in range:
+     the remaining code handles minor overflows correctly,
+     assuming int and time_t arithmetic wraps around.
+     Major overflows are caught at the end.  */
+
+  /* Calculate day of year from year, month, and day of month.
+     The result need not be in range.  */
+  int yday = ((__mon_yday[__isleap (year + TM_YEAR_BASE)]
+	       [mon_remainder + 12 * negative_mon_remainder])
+	      + mday - 1);
+
+#if LEAP_SECONDS_POSSIBLE
+  /* Handle out-of-range seconds specially,
+     since ydhms_tm_diff assumes every minute has 60 seconds.  */
+  int sec_requested = sec;
+  if (sec < 0)
+    sec = 0;
+  if (59 < sec)
+    sec = 59;
+#endif
+
+  /* Invert CONVERT by probing.  First assume the same offset as last time.
+     Then repeatedly use the error to improve the guess.  */
+
+  tm.tm_year = EPOCH_YEAR - TM_YEAR_BASE;
+  tm.tm_yday = tm.tm_hour = tm.tm_min = tm.tm_sec = 0;
+  t0 = ydhms_tm_diff (year, yday, hour, min, sec, &tm);
+
+  for (t = t0 + *offset;
+       (dt = ydhms_tm_diff (year, yday, hour, min, sec, (*convert) (&t, &tm)));
+       t += dt)
+    if (--remaining_probes == 0)
+      return -1;
+
+  /* Check whether tm.tm_isdst has the requested value, if any.  */
+  if (0 <= isdst && 0 <= tm.tm_isdst)
+    {
+      int dst_diff = (isdst != 0) - (tm.tm_isdst != 0);
+      if (dst_diff)
+	{
+	  /* Move two hours in the direction indicated by the disagreement,
+	     probe some more, and switch to a new time if found.
+	     The largest known fallback due to daylight savings is two hours:
+	     once, in Newfoundland, 1988-10-30 02:00 -> 00:00.  */
+	  time_t ot = t - 2 * 60 * 60 * dst_diff;
+	  while (--remaining_probes != 0)
+	    {
+	      struct tm otm;
+	      if (! (dt = ydhms_tm_diff (year, yday, hour, min, sec,
+					 (*convert) (&ot, &otm))))
+		{
+		  t = ot;
+		  tm = otm;
+		  break;
+		}
+	      if ((ot += dt) == t)
+		break;  /* Avoid a redundant probe.  */
+	    }
+	}
+    }
+
+  *offset = t - t0;
+
+#if LEAP_SECONDS_POSSIBLE
+  if (sec_requested != tm.tm_sec)
+    {
+      /* Adjust time to reflect the tm_sec requested, not the normalized value.
+	 Also, repair any damage from a false match due to a leap second.  */
+      t += sec_requested - sec + (sec == 0 && tm.tm_sec == 60);
+      (*convert) (&t, &tm);
+    }
+#endif
+
+  if (TIME_T_MAX / INT_MAX / 366 / 24 / 60 / 60 < 3)
+    {
+      /* time_t isn't large enough to rule out overflows in ydhms_tm_diff,
+	 so check for major overflows.  A gross check suffices,
+	 since if t has overflowed, it is off by a multiple of
+	 TIME_T_MAX - TIME_T_MIN + 1.  So ignore any component of
+	 the difference that is bounded by a small value.  */
+
+      double dyear = (double) year_requested + mon_years - tm.tm_year;
+      double dday = 366 * dyear + mday;
+      double dsec = 60 * (60 * (24 * dday + hour) + min) + sec_requested;
+
+      if (TIME_T_MAX / 3 - TIME_T_MIN / 3 < (dsec < 0 ? - dsec : dsec))
+	return -1;
+    }
+
+  *tp = tm;
+  return t;
+}
+
+#ifdef weak_alias
+weak_alias (mktime, timelocal)
+#endif
+
+#if DEBUG_MKTIME
+
+static int
+not_equal_tm (a, b)
+     struct tm *a;
+     struct tm *b;
+{
+  return ((a->tm_sec ^ b->tm_sec)
+	  | (a->tm_min ^ b->tm_min)
+	  | (a->tm_hour ^ b->tm_hour)
+	  | (a->tm_mday ^ b->tm_mday)
+	  | (a->tm_mon ^ b->tm_mon)
+	  | (a->tm_year ^ b->tm_year)
+	  | (a->tm_mday ^ b->tm_mday)
+	  | (a->tm_yday ^ b->tm_yday)
+	  | (a->tm_isdst ^ b->tm_isdst));
+}
+
+static void
+print_tm (tp)
+     struct tm *tp;
+{
+  printf ("%04d-%02d-%02d %02d:%02d:%02d yday %03d wday %d isdst %d",
+	  tp->tm_year + TM_YEAR_BASE, tp->tm_mon + 1, tp->tm_mday,
+	  tp->tm_hour, tp->tm_min, tp->tm_sec,
+	  tp->tm_yday, tp->tm_wday, tp->tm_isdst);
+}
+
+static int
+check_result (tk, tmk, tl, tml)
+     time_t tk;
+     struct tm tmk;
+     time_t tl;
+     struct tm tml;
+{
+  if (tk != tl || not_equal_tm (&tmk, &tml))
+    {
+      printf ("mktime (");
+      print_tm (&tmk);
+      printf (")\nyields (");
+      print_tm (&tml);
+      printf (") == %ld, should be %ld\n", (long) tl, (long) tk);
+      return 1;
+    }
+
+  return 0;
+}
+
+int
+main (argc, argv)
+     int argc;
+     char **argv;
+{
+  int status = 0;
+  struct tm tm, tmk, tml;
+  time_t tk, tl;
+  char trailer;
+
+  if ((argc == 3 || argc == 4)
+      && (sscanf (argv[1], "%d-%d-%d%c",
+		  &tm.tm_year, &tm.tm_mon, &tm.tm_mday, &trailer)
+	  == 3)
+      && (sscanf (argv[2], "%d:%d:%d%c",
+		  &tm.tm_hour, &tm.tm_min, &tm.tm_sec, &trailer)
+	  == 3))
+    {
+      tm.tm_year -= TM_YEAR_BASE;
+      tm.tm_mon--;
+      tm.tm_isdst = argc == 3 ? -1 : atoi (argv[3]);
+      tmk = tm;
+      tl = mktime (&tmk);
+      tml = *localtime (&tl);
+      printf ("mktime returns %ld == ", (long) tl);
+      print_tm (&tmk);
+      printf ("\n");
+      status = check_result (tl, tmk, tl, tml);
+    }
+  else if (argc == 4 || (argc == 5 && strcmp (argv[4], "-") == 0))
+    {
+      time_t from = atol (argv[1]);
+      time_t by = atol (argv[2]);
+      time_t to = atol (argv[3]);
+
+      if (argc == 4)
+	for (tl = from; tl <= to; tl += by)
+	  {
+	    tml = *localtime (&tl);
+	    tmk = tml;
+	    tk = mktime (&tmk);
+	    status |= check_result (tk, tmk, tl, tml);
+	  }
+      else
+	for (tl = from; tl <= to; tl += by)
+	  {
+	    /* Null benchmark.  */
+	    tml = *localtime (&tl);
+	    tmk = tml;
+	    tk = tl;
+	    status |= check_result (tk, tmk, tl, tml);
+	  }
+    }
+  else
+    printf ("Usage:\
+\t%s YYYY-MM-DD HH:MM:SS [ISDST] # Test given time.\n\
+\t%s FROM BY TO # Test values FROM, FROM+BY, ..., TO.\n\
+\t%s FROM BY TO - # Do not test those values (for benchmark).\n",
+	    argv[0], argv[0], argv[0]);
+
+  return status;
+}
+
+#endif /* DEBUG_MKTIME */
+
+/*
+Local Variables:
+compile-command: "gcc -DDEBUG=1 -Wall -O -g mktime.c -o mktime"
+End:
+*/
diff --git a/lib/sh/netconn.c b/lib/sh/netconn.c
new file mode 100644
index 0000000..e20f104
--- /dev/null
+++ b/lib/sh/netconn.c
@@ -0,0 +1,82 @@
+/* netconn.c -- is a particular file descriptor a network connection?. */
+
+/* Copyright (C) 2002-2005 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#include <bashtypes.h>
+#if ! defined(_MINIX) && defined (HAVE_SYS_FILE_H)
+#  include <sys/file.h>
+#endif
+#include <posixstat.h>
+#include <filecntl.h>
+
+#include <errno.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+/* The second and subsequent conditions must match those used to decide
+   whether or not to call getpeername() in isnetconn(). */
+#if defined (HAVE_SYS_SOCKET_H) && defined (HAVE_GETPEERNAME) && !defined (SVR4_2)
+#  include <sys/socket.h>
+#endif
+
+/* Is FD a socket or network connection? */
+int
+isnetconn (fd)
+     int fd;
+{
+#if defined (HAVE_SYS_SOCKET_H) && defined (HAVE_GETPEERNAME) && !defined (SVR4_2) && !defined (__BEOS__)
+  int rv;
+  socklen_t l;
+  struct sockaddr sa;
+
+  l = sizeof(sa);
+  rv = getpeername(fd, &sa, &l);
+  /* Posix.2 says getpeername can return these errors. */
+  return ((rv < 0 && (errno == ENOTSOCK || errno == ENOTCONN || errno == EINVAL || errno == EBADF)) ? 0 : 1);
+#else /* !HAVE_GETPEERNAME || SVR4_2 || __BEOS__ */
+#  if defined (SVR4) || defined (SVR4_2)
+  /* Sockets on SVR4 and SVR4.2 are character special (streams) devices. */
+  struct stat sb;
+
+  if (isatty (fd))
+    return (0);
+  if (fstat (fd, &sb) < 0)
+    return (0);
+#    if defined (S_ISFIFO)
+  if (S_ISFIFO (sb.st_mode))
+    return (0);
+#    endif /* S_ISFIFO */
+  return (S_ISCHR (sb.st_mode));
+#  else /* !SVR4 && !SVR4_2 */
+#    if defined (S_ISSOCK) && !defined (__BEOS__)
+  struct stat sb;
+
+  if (fstat (fd, &sb) < 0)
+    return (0);
+  return (S_ISSOCK (sb.st_mode));
+#    else /* !S_ISSOCK || __BEOS__ */
+  return (0);
+#    endif /* !S_ISSOCK || __BEOS__ */
+#  endif /* !SVR4 && !SVR4_2 */
+#endif /* !HAVE_GETPEERNAME || SVR4_2 || __BEOS__ */
+}
diff --git a/lib/sh/netopen.c b/lib/sh/netopen.c
new file mode 100644
index 0000000..ee0baf6
--- /dev/null
+++ b/lib/sh/netopen.c
@@ -0,0 +1,351 @@
+/*   
+ * netopen.c -- functions to make tcp/udp connections
+ *
+ * Chet Ramey
+ * chet@ins.CWRU.Edu
+ */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (HAVE_NETWORK)
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <stdio.h> 
+#include <sys/types.h>
+
+#if defined (HAVE_SYS_SOCKET_H)
+#  include <sys/socket.h>
+#endif
+
+#if defined (HAVE_NETINET_IN_H)
+#  include <netinet/in.h>
+#endif
+
+#if defined (HAVE_NETDB_H)
+#  include <netdb.h>
+#endif
+
+#if defined (HAVE_ARPA_INET_H)
+#  include <arpa/inet.h>
+#endif
+
+#include <bashansi.h>
+#include <bashintl.h>
+
+#include <errno.h>
+
+#include <shell.h>
+#include <xmalloc.h>
+
+#ifndef errno
+extern int errno;
+#endif
+
+#if !defined (HAVE_INET_ATON)
+extern int inet_aton PARAMS((const char *, struct in_addr *));
+#endif
+
+#ifndef HAVE_GETADDRINFO
+static int _getaddr PARAMS((char *, struct in_addr *));
+static int _getserv PARAMS((char *, int, unsigned short *));
+static int _netopen4 PARAMS((char *, char *, int));
+#else /* HAVE_GETADDRINFO */
+static int _netopen6 PARAMS((char *, char *, int));
+#endif
+
+static int _netopen PARAMS((char *, char *, int));
+
+#ifndef HAVE_GETADDRINFO
+/* Stuff the internet address corresponding to HOST into AP, in network
+   byte order.  Return 1 on success, 0 on failure. */
+
+static int
+_getaddr (host, ap)
+     char *host;
+     struct in_addr *ap;
+{
+  struct hostent *h;
+  int r;
+
+  r = 0;
+  if (host[0] >= '0' && host[0] <= '9')
+    {
+      /* If the first character is a digit, guess that it's an
+	 Internet address and return immediately if inet_aton succeeds. */
+      r = inet_aton (host, ap);
+      if (r)
+	return r;
+    }
+#if !defined (HAVE_GETHOSTBYNAME)
+  return 0;
+#else
+  h = gethostbyname (host);
+  if (h && h->h_addr)
+    {
+      bcopy(h->h_addr, (char *)ap, h->h_length);
+      return 1;
+    }
+#endif
+  return 0;
+  
+}
+
+/* Return 1 if SERV is a valid port number and stuff the converted value into
+   PP in network byte order. */   
+static int
+_getserv (serv, proto, pp)
+     char *serv;
+     int proto;
+     unsigned short *pp;
+{
+  intmax_t l;
+  unsigned short s;
+
+  if (legal_number (serv, &l))
+    {
+      s = (unsigned short)(l & 0xFFFF);
+      if (s != l)
+	return (0);
+      s = htons (s);
+      if (pp)
+	*pp = s;
+      return 1;
+    }
+  else
+#if defined (HAVE_GETSERVBYNAME)
+    {
+      struct servent *se;
+
+      se = getservbyname (serv, (proto == 't') ? "tcp" : "udp");
+      if (se == 0)
+	return 0;
+      if (pp)
+	*pp = se->s_port;	/* ports returned in network byte order */
+      return 1;
+    }
+#else /* !HAVE_GETSERVBYNAME */
+    return 0;
+#endif /* !HAVE_GETSERVBYNAME */
+}
+
+/*
+ * Open a TCP or UDP connection to HOST on port SERV.  Uses the
+ * traditional BSD mechanisms.  Returns the connected socket or -1 on error.
+ */
+static int 
+_netopen4(host, serv, typ)
+     char *host, *serv;
+     int typ;
+{
+  struct in_addr ina;
+  struct sockaddr_in sin;
+  unsigned short p;
+  int s, e;
+
+  if (_getaddr(host, &ina) == 0)
+    {
+      internal_error (_("%s: host unknown"), host);
+      errno = EINVAL;
+      return -1;
+    }
+
+  if (_getserv(serv, typ, &p) == 0)
+    {
+      internal_error(_("%s: invalid service"), serv);
+      errno = EINVAL;
+      return -1;
+    }
+	
+  memset ((char *)&sin, 0, sizeof(sin));
+  sin.sin_family = AF_INET;
+  sin.sin_port = p;
+  sin.sin_addr = ina;
+
+  s = socket(AF_INET, (typ == 't') ? SOCK_STREAM : SOCK_DGRAM, 0);
+  if (s < 0)
+    {
+      sys_error ("socket");
+      return (-1);
+    }
+
+  if (connect (s, (struct sockaddr *)&sin, sizeof (sin)) < 0)
+    {
+      e = errno;
+      sys_error("connect");
+      close(s);
+      errno = e;
+      return (-1);
+    }
+
+  return(s);
+}
+#endif /* ! HAVE_GETADDRINFO */
+
+#ifdef HAVE_GETADDRINFO
+/*
+ * Open a TCP or UDP connection to HOST on port SERV.  Uses getaddrinfo(3)
+ * which provides support for IPv6.  Returns the connected socket or -1
+ * on error.
+ */
+static int
+_netopen6 (host, serv, typ)
+     char *host, *serv;
+     int typ;
+{
+  int s, e;
+  struct addrinfo hints, *res, *res0;
+  int gerr;
+
+  memset ((char *)&hints, 0, sizeof (hints));
+  /* XXX -- if problems with IPv6, set to PF_INET for IPv4 only */
+#ifdef DEBUG	/* PF_INET is the one that works for me */
+  hints.ai_family = PF_INET;
+#else
+  hints.ai_family = PF_UNSPEC;
+#endif
+  hints.ai_socktype = (typ == 't') ? SOCK_STREAM : SOCK_DGRAM;
+
+  gerr = getaddrinfo (host, serv, &hints, &res0);
+  if (gerr)
+    {
+      if (gerr == EAI_SERVICE)
+	internal_error ("%s: %s", serv, gai_strerror (gerr));
+      else
+	internal_error ("%s: %s", host, gai_strerror (gerr));
+      errno = EINVAL;
+      return -1;
+    }
+
+  for (res = res0; res; res = res->ai_next)
+    {
+      if ((s = socket (res->ai_family, res->ai_socktype, res->ai_protocol)) < 0)
+	{
+	  if (res->ai_next)
+	    continue;
+	  sys_error ("socket");
+	  freeaddrinfo (res0);
+	  return -1;
+	}
+      if (connect (s, res->ai_addr, res->ai_addrlen) < 0)
+	{
+	  if (res->ai_next)
+	    {
+	      close (s);
+	      continue;
+	    }
+	  e = errno;
+	  sys_error ("connect");
+	  close (s);
+	  freeaddrinfo (res0);
+	  errno = e;
+	  return -1;
+	}
+      freeaddrinfo (res0);
+      break;
+    }
+  return s;
+}
+#endif /* HAVE_GETADDRINFO */
+
+/*
+ * Open a TCP or UDP connection to HOST on port SERV.  Uses getaddrinfo(3)
+ * if available, falling back to the traditional BSD mechanisms otherwise.
+ * Returns the connected socket or -1 on error.
+ */
+static int 
+_netopen(host, serv, typ)
+     char *host, *serv;
+     int typ;
+{
+#ifdef HAVE_GETADDRINFO
+  return (_netopen6 (host, serv, typ));
+#else
+  return (_netopen4 (host, serv, typ));
+#endif
+}
+
+/*
+ * Open a TCP or UDP connection given a path like `/dev/tcp/host/port' to
+ * host `host' on port `port' and return the connected socket.
+ */
+int
+netopen (path)
+     char *path;
+{
+  char *np, *s, *t;
+  int fd;
+
+  np = (char *)xmalloc (strlen (path) + 1);
+  strcpy (np, path);
+
+  s = np + 9;
+  t = strchr (s, '/');
+  if (t == 0)
+    {
+      internal_error (_("%s: bad network path specification"), path);
+      free (np);
+      return -1;
+    }
+  *t++ = '\0';
+  fd = _netopen (s, t, path[5]);
+  free (np);
+
+  return fd;
+}
+
+#if 0
+/*
+ * Open a TCP connection to host `host' on the port defined for service
+ * `serv' and return the connected socket.
+ */
+int
+tcpopen (host, serv)
+     char *host, *serv;
+{
+  return (_netopen (host, serv, 't'));
+}
+
+/*
+ * Open a UDP connection to host `host' on the port defined for service
+ * `serv' and return the connected socket.
+ */
+int
+udpopen (host, serv)
+     char *host, *serv;
+{
+  return _netopen (host, serv, 'u');
+}
+#endif
+
+#else /* !HAVE_NETWORK */
+
+int
+netopen (path)
+     char *path;
+{
+  internal_error (_("network operations not supported"));
+  return -1;
+}
+
+#endif /* !HAVE_NETWORK */
diff --git a/lib/sh/oslib.c b/lib/sh/oslib.c
new file mode 100644
index 0000000..65eb99d
--- /dev/null
+++ b/lib/sh/oslib.c
@@ -0,0 +1,301 @@
+/* oslib.c - functions present only in some unix versions. */
+
+/* Copyright (C) 1995,2010 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#include <bashtypes.h>
+#if defined (HAVE_SYS_PARAM_H)
+#  include <sys/param.h>
+#endif
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#if defined (HAVE_LIMITS_H)
+#  include <limits.h>
+#endif
+
+#include <posixstat.h>
+#include <filecntl.h>
+#include <bashansi.h>
+
+#if !defined (HAVE_KILLPG)
+#  include <signal.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+#include <chartypes.h>
+
+#include <shell.h>
+
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+/* Make the functions strchr and strrchr if they do not exist. */
+#if !defined (HAVE_STRCHR)
+char *
+strchr (string, c)
+     char *string;
+     int c;
+{
+  register char *s;
+
+  for (s = string; s && *s; s++)
+    if (*s == c)
+      return (s);
+
+  return ((char *) NULL);
+}
+
+char *
+strrchr (string, c)
+     char *string;
+     int c;
+{
+  register char *s, *t;
+
+  for (s = string, t = (char *)NULL; s && *s; s++)
+    if (*s == c)
+      t = s;
+  return (t);
+}
+#endif /* !HAVE_STRCHR */
+
+#if !defined (HAVE_DUP2) || defined (DUP2_BROKEN)
+/* Replacement for dup2 (), for those systems which either don't have it,
+   or supply one with broken behaviour. */
+int
+dup2 (fd1, fd2)
+     int fd1, fd2;
+{
+  int saved_errno, r;
+
+  /* If FD1 is not a valid file descriptor, then return immediately with
+     an error. */
+  if (fcntl (fd1, F_GETFL, 0) == -1)
+    return (-1);
+
+  if (fd2 < 0 || fd2 >= getdtablesize ())
+    {
+      errno = EBADF;
+      return (-1);
+    }
+
+  if (fd1 == fd2)
+    return (0);
+
+  saved_errno = errno;
+
+  (void) close (fd2);
+  r = fcntl (fd1, F_DUPFD, fd2);
+
+  if (r >= 0)
+    errno = saved_errno;
+  else
+    if (errno == EINVAL)
+      errno = EBADF;
+
+  /* Force the new file descriptor to remain open across exec () calls. */
+  SET_OPEN_ON_EXEC (fd2);
+  return (r);
+}
+#endif /* !HAVE_DUP2 */
+
+/*
+ * Return the total number of available file descriptors.
+ *
+ * On some systems, like 4.2BSD and its descendants, there is a system call
+ * that returns the size of the descriptor table: getdtablesize().  There are
+ * lots of ways to emulate this on non-BSD systems.
+ *
+ * On System V.3, this can be obtained via a call to ulimit:
+ *	return (ulimit(4, 0L));
+ *
+ * On other System V systems, NOFILE is defined in /usr/include/sys/param.h
+ * (this is what we assume below), so we can simply use it:
+ *	return (NOFILE);
+ *
+ * On POSIX systems, there are specific functions for retrieving various
+ * configuration parameters:
+ *	return (sysconf(_SC_OPEN_MAX));
+ *
+ */
+
+#if !defined (HAVE_GETDTABLESIZE)
+int
+getdtablesize ()
+{
+#  if defined (_POSIX_VERSION) && defined (HAVE_SYSCONF) && defined (_SC_OPEN_MAX)
+  return (sysconf(_SC_OPEN_MAX));	/* Posix systems use sysconf */
+#  else /* ! (_POSIX_VERSION && HAVE_SYSCONF && _SC_OPEN_MAX) */
+#    if defined (ULIMIT_MAXFDS)
+  return (ulimit (4, 0L));	/* System V.3 systems use ulimit(4, 0L) */
+#    else /* !ULIMIT_MAXFDS */
+#      if defined (NOFILE)	/* Other systems use NOFILE */
+  return (NOFILE);
+#      else /* !NOFILE */
+  return (20);			/* XXX - traditional value is 20 */
+#      endif /* !NOFILE */
+#    endif /* !ULIMIT_MAXFDS */
+#  endif /* ! (_POSIX_VERSION && _SC_OPEN_MAX) */
+}
+#endif /* !HAVE_GETDTABLESIZE */
+
+#if !defined (HAVE_BCOPY)
+#  if defined (bcopy)
+#    undef bcopy
+#  endif
+void
+bcopy (s,d,n)
+     char *d, *s;
+     int n;
+{
+  FASTCOPY (s, d, n);
+}
+#endif /* !HAVE_BCOPY */
+
+#if !defined (HAVE_BZERO)
+#  if defined (bzero)
+#    undef bzero
+#  endif
+void
+bzero (s, n)
+     char *s;
+     int n;
+{
+  register int i;
+  register char *r;
+
+  for (i = 0, r = s; i < n; i++)
+    *r++ = '\0';
+}
+#endif
+
+#if !defined (HAVE_GETHOSTNAME)
+#  if defined (HAVE_UNAME)
+#    include <sys/utsname.h>
+int
+gethostname (name, namelen)
+     char *name;
+     int namelen;
+{
+  int i;
+  struct utsname ut;
+
+  --namelen;
+
+  uname (&ut);
+  i = strlen (ut.nodename) + 1;
+  strncpy (name, ut.nodename, i < namelen ? i : namelen);
+  name[namelen] = '\0';
+  return (0);
+}
+#  else /* !HAVE_UNAME */
+int
+gethostname (name, namelen)
+     char *name;
+     int namelen;
+{
+  strncpy (name, "unknown", namelen);
+  name[namelen] = '\0';
+  return 0;
+}
+#  endif /* !HAVE_UNAME */
+#endif /* !HAVE_GETHOSTNAME */
+
+#if !defined (HAVE_KILLPG)
+int
+killpg (pgrp, sig)
+     pid_t pgrp;
+     int sig;
+{
+  return (kill (-pgrp, sig));
+}
+#endif /* !HAVE_KILLPG */
+
+#if !defined (HAVE_MKFIFO) && defined (PROCESS_SUBSTITUTION)
+int
+mkfifo (path, mode)
+     char *path;
+     int mode;
+{
+#if defined (S_IFIFO)
+  return (mknod (path, (mode | S_IFIFO), 0));
+#else /* !S_IFIFO */
+  return (-1);
+#endif /* !S_IFIFO */
+}
+#endif /* !HAVE_MKFIFO && PROCESS_SUBSTITUTION */
+
+#define DEFAULT_MAXGROUPS 64
+
+int
+getmaxgroups ()
+{
+  static int maxgroups = -1;
+
+  if (maxgroups > 0)
+    return maxgroups;
+
+#if defined (HAVE_SYSCONF) && defined (_SC_NGROUPS_MAX)
+  maxgroups = sysconf (_SC_NGROUPS_MAX);
+#else
+#  if defined (NGROUPS_MAX)
+  maxgroups = NGROUPS_MAX;
+#  else /* !NGROUPS_MAX */
+#    if defined (NGROUPS)
+  maxgroups = NGROUPS;
+#    else /* !NGROUPS */
+  maxgroups = DEFAULT_MAXGROUPS;
+#    endif /* !NGROUPS */
+#  endif /* !NGROUPS_MAX */  
+#endif /* !HAVE_SYSCONF || !SC_NGROUPS_MAX */
+
+  if (maxgroups <= 0)
+    maxgroups = DEFAULT_MAXGROUPS;
+
+  return maxgroups;
+}
+
+long
+getmaxchild ()
+{
+  static long maxchild = -1L;
+
+  if (maxchild > 0)
+    return maxchild;
+
+#if defined (HAVE_SYSCONF) && defined (_SC_CHILD_MAX)
+  maxchild = sysconf (_SC_CHILD_MAX);
+#else
+#  if defined (CHILD_MAX)
+  maxchild = CHILD_MAX;
+#  else
+#    if defined (MAXUPRC)
+  maxchild = MAXUPRC;
+#    endif /* MAXUPRC */
+#  endif /* CHILD_MAX */
+#endif /* !HAVE_SYSCONF || !_SC_CHILD_MAX */
+
+  return (maxchild);
+}
diff --git a/lib/sh/pathcanon.c b/lib/sh/pathcanon.c
new file mode 100644
index 0000000..7d0df9f
--- /dev/null
+++ b/lib/sh/pathcanon.c
@@ -0,0 +1,234 @@
+/* pathcanon.c -- canonicalize and manipulate pathnames. */
+
+/* Copyright (C) 2000 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#include <bashtypes.h>
+#if defined (HAVE_SYS_PARAM_H)
+#  include <sys/param.h>
+#endif
+#include <posixstat.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <filecntl.h>
+#include <bashansi.h>
+#include <stdio.h>
+#include <chartypes.h>
+#include <errno.h>
+
+#include "shell.h"
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+#if defined (__CYGWIN__)
+#include <sys/cygwin.h>
+
+static int
+_is_cygdrive (path)
+     char *path;
+{
+  static char user[MAXPATHLEN];
+  static char system[MAXPATHLEN];
+  static int first_time = 1;
+
+  /* If the path is the first part of a network path, treat it as
+     existing. */
+  if (path[0] == '/' && path[1] == '/' && !strchr (path + 2, '/'))
+    return 1; 
+  /* Otherwise check for /cygdrive prefix. */
+  if (first_time)
+    {
+      char user_flags[MAXPATHLEN];
+      char system_flags[MAXPATHLEN];
+      /* Get the cygdrive info */
+      cygwin_internal (CW_GET_CYGDRIVE_INFO, user, system, user_flags, system_flags);
+      first_time = 0;
+    }
+  return !strcasecmp (path, user) || !strcasecmp (path, system);
+}
+#endif /* __CYGWIN__ */	
+
+/* Return 1 if PATH corresponds to a directory.  A function for debugging. */
+static int
+_path_isdir (path)
+     char *path;
+{
+  int l;
+  struct stat sb;
+
+  /* This should leave errno set to the correct value. */
+  errno = 0;
+  l = stat (path, &sb) == 0 && S_ISDIR (sb.st_mode);
+#if defined (__CYGWIN__)
+  if (l == 0)
+    l = _is_cygdrive (path);
+#endif
+  return l;
+}
+
+/* Canonicalize PATH, and return a new path.  The new path differs from PATH
+   in that:
+	Multiple `/'s are collapsed to a single `/'.
+	Leading `./'s and trailing `/.'s are removed.
+	Trailing `/'s are removed.
+	Non-leading `../'s and trailing `..'s are handled by removing
+	portions of the path. */
+
+/* Look for ROOTEDPATH, PATHSEP, DIRSEP, and ISDIRSEP in ../../general.h */
+
+#define DOUBLE_SLASH(p)	((p[0] == '/') && (p[1] == '/') && p[2] != '/')
+
+char *
+sh_canonpath (path, flags)
+     char *path;
+     int flags;
+{
+  char stub_char;
+  char *result, *p, *q, *base, *dotdot;
+  int rooted, double_slash_path;
+
+  /* The result cannot be larger than the input PATH. */
+  result = (flags & PATH_NOALLOC) ? path : savestring (path);
+
+  /* POSIX.2 says to leave a leading `//' alone.  On cygwin, we skip over any
+     leading `x:' (dos drive name). */
+  if (rooted = ROOTEDPATH(path))
+    {
+      stub_char = DIRSEP;
+#if defined (__CYGWIN__)
+      base = (ISALPHA((unsigned char)result[0]) && result[1] == ':') ? result + 3 : result + 1;
+#else
+      base = result + 1;
+#endif
+      double_slash_path = DOUBLE_SLASH (path);
+      base += double_slash_path;
+    }
+  else
+    {
+      stub_char = '.';
+#if defined (__CYGWIN__)
+      base = (ISALPHA((unsigned char)result[0]) && result[1] == ':') ? result + 2 : result;
+#else
+      base = result;
+#endif
+      double_slash_path = 0;
+    }
+
+  /*
+   * invariants:
+   *	  base points to the portion of the path we want to modify
+   *      p points at beginning of path element we're considering.
+   *      q points just past the last path element we wrote (no slash).
+   *      dotdot points just past the point where .. cannot backtrack
+   *	  any further (no slash).
+   */
+  p = q = dotdot = base;
+
+  while (*p)
+    {
+      if (ISDIRSEP(p[0])) /* null element */
+	p++;
+      else if(p[0] == '.' && PATHSEP(p[1]))	/* . and ./ */
+	p += 1; 	/* don't count the separator in case it is nul */
+      else if (p[0] == '.' && p[1] == '.' && PATHSEP(p[2])) /* .. and ../ */
+	{
+	  p += 2; /* skip `..' */
+	  if (q > dotdot)	/* can backtrack */
+	    {
+	      if (flags & PATH_CHECKDOTDOT)
+		{
+		  char c;
+
+		  /* Make sure what we have so far corresponds to a valid
+		     path before we chop some of it off. */
+		  c = *q;
+		  *q = '\0';
+		  if (_path_isdir (result) == 0)
+		    {
+		      if ((flags & PATH_NOALLOC) == 0)
+			free (result);
+		      return ((char *)NULL);
+		    }
+		  *q = c;
+		}
+
+	      while (--q > dotdot && ISDIRSEP(*q) == 0)
+		;
+	    }
+	  else if (rooted == 0)
+	    {
+	      /* /.. is / but ./../ is .. */
+	      if (q != base)
+		*q++ = DIRSEP;
+	      *q++ = '.';
+	      *q++ = '.';
+	      dotdot = q;
+	    }
+	}
+      else	/* real path element */
+	{
+	  /* add separator if not at start of work portion of result */
+	  if (q != base)
+	    *q++ = DIRSEP;
+	  while (*p && (ISDIRSEP(*p) == 0))
+	    *q++ = *p++;
+	  /* Check here for a valid directory with _path_isdir. */
+	  if (flags & PATH_CHECKEXISTS)
+	    {
+	      char c;
+
+	      /* Make sure what we have so far corresponds to a valid
+		 path before we chop some of it off. */
+	      c = *q;
+	      *q = '\0';
+	      if (_path_isdir (result) == 0)
+		{
+		  if ((flags & PATH_NOALLOC) == 0)
+		    free (result);
+		  return ((char *)NULL);
+		}
+	      *q = c;
+	    }
+	}
+    }
+
+  /* Empty string is really ``.'' or `/', depending on what we started with. */
+  if (q == result)
+    *q++ = stub_char;
+  *q = '\0';
+
+  /* If the result starts with `//', but the original path does not, we
+     can turn the // into /.  Because of how we set `base', this should never
+     be true, but it's a sanity check. */
+  if (DOUBLE_SLASH(result) && double_slash_path == 0)
+    {
+      if (result[2] == '\0')	/* short-circuit for bare `//' */
+	result[1] = '\0';
+      else
+	memmove (result, result + 1, strlen (result + 1) + 1);
+    }
+
+  return (result);
+}
diff --git a/lib/sh/pathphys.c b/lib/sh/pathphys.c
new file mode 100644
index 0000000..95b72f1
--- /dev/null
+++ b/lib/sh/pathphys.c
@@ -0,0 +1,296 @@
+/* pathphys.c -- return pathname with all symlinks expanded. */
+
+/* Copyright (C) 2000-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#include <bashtypes.h>
+#if defined (HAVE_SYS_PARAM_H)
+#  include <sys/param.h>
+#endif
+#include <posixstat.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <filecntl.h>
+#include <bashansi.h>
+#include <stdio.h>
+#include <chartypes.h>
+#include <errno.h>
+
+#include "shell.h"
+
+#if !defined (MAXSYMLINKS)
+#  define MAXSYMLINKS 32
+#endif
+
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+extern char *get_working_directory PARAMS((char *));
+
+static int
+_path_readlink (path, buf, bufsiz)
+     char *path;
+     char *buf;
+     int bufsiz;
+{
+#ifdef HAVE_READLINK
+  return readlink (path, buf, bufsiz);
+#else
+  errno = EINVAL;
+  return -1;
+#endif
+}
+
+/* Look for ROOTEDPATH, PATHSEP, DIRSEP, and ISDIRSEP in ../../general.h */
+
+#define DOUBLE_SLASH(p)	((p[0] == '/') && (p[1] == '/') && p[2] != '/')
+
+/*
+ * Return PATH with all symlinks expanded in newly-allocated memory.
+ * This always gets an absolute pathname.
+ */
+
+char *
+sh_physpath (path, flags)
+     char *path;
+     int flags;
+{
+  char tbuf[PATH_MAX+1], linkbuf[PATH_MAX+1];
+  char *result, *p, *q, *qsave, *qbase, *workpath;
+  int double_slash_path, linklen, nlink;
+
+  linklen = strlen (path);
+
+#if 0
+  /* First sanity check -- punt immediately if the name is too long. */
+  if (linklen >= PATH_MAX)
+    return (savestring (path));
+#endif
+
+  nlink = 0;
+  q = result = (char *)xmalloc (PATH_MAX + 1);
+
+  /* Even if we get something longer than PATH_MAX, we might be able to
+     shorten it, so we try. */
+  if (linklen >= PATH_MAX)
+    workpath = savestring (path);
+  else
+    {
+      workpath = (char *)xmalloc (PATH_MAX + 1);
+      strcpy (workpath, path);
+    }
+
+  /* This always gets an absolute pathname. */
+
+  /* POSIX.2 says to leave a leading `//' alone.  On cygwin, we skip over any
+     leading `x:' (dos drive name). */
+#if defined (__CYGWIN__)
+  qbase = (ISALPHA((unsigned char)workpath[0]) && workpath[1] == ':') ? workpath + 3 : workpath + 1;
+#else
+  qbase = workpath + 1;
+#endif
+  double_slash_path = DOUBLE_SLASH (workpath);
+  qbase += double_slash_path;
+
+  for (p = workpath; p < qbase; )
+    *q++ = *p++;
+  qbase = q;
+
+  /*
+   * invariants:
+   *	  qbase points to the portion of the result path we want to modify
+   *      p points at beginning of path element we're considering.
+   *      q points just past the last path element we wrote (no slash).
+   *
+   * XXX -- need to fix error checking for too-long pathnames
+   */
+
+  while (*p)
+    {
+      if (ISDIRSEP(p[0])) /* null element */
+	p++;
+      else if(p[0] == '.' && PATHSEP(p[1]))	/* . and ./ */
+	p += 1; 	/* don't count the separator in case it is nul */
+      else if (p[0] == '.' && p[1] == '.' && PATHSEP(p[2])) /* .. and ../ */
+	{
+	  p += 2; /* skip `..' */
+	  if (q > qbase)
+	    {
+	      while (--q > qbase && ISDIRSEP(*q) == 0)
+		;
+	    }
+	}
+      else	/* real path element */
+	{
+	  /* add separator if not at start of work portion of result */
+	  qsave = q;
+	  if (q != qbase)
+	    *q++ = DIRSEP;
+	  while (*p && (ISDIRSEP(*p) == 0))
+	    {
+	      if (q - result >= PATH_MAX)
+		{
+#ifdef ENAMETOOLONG
+		  errno = ENAMETOOLONG;
+#else
+		  errno = EINVAL;
+#endif
+		  goto error;
+		}
+		
+	      *q++ = *p++;
+	    }
+
+	  *q = '\0';
+
+	  linklen = _path_readlink (result, linkbuf, PATH_MAX);
+	  if (linklen < 0)	/* if errno == EINVAL, it's not a symlink */
+	    {
+	      if (errno != EINVAL)
+		goto error;
+	      continue;
+	    }
+
+	  /* It's a symlink, and the value is in LINKBUF. */
+	  nlink++;
+	  if (nlink > MAXSYMLINKS)
+	    {
+#ifdef ELOOP
+	      errno = ELOOP;
+#else
+	      errno = EINVAL;
+#endif
+error:
+	      free (result);
+	      free (workpath);
+	      return ((char *)NULL);
+	    }
+
+	  linkbuf[linklen] = '\0';
+
+	  /* If the new path length would overrun PATH_MAX, punt now. */
+	  if ((strlen (p) + linklen + 2) >= PATH_MAX)
+	    {
+#ifdef ENAMETOOLONG
+	      errno = ENAMETOOLONG;
+#else
+	      errno = EINVAL;
+#endif
+	      goto error;
+	    }
+
+	  /* Form the new pathname by copying the link value to a temporary
+	     buffer and appending the rest of `workpath'.  Reset p to point
+	     to the start of the rest of the path.  If the link value is an
+	     absolute pathname, reset p, q, and qbase.  If not, reset p
+	     and q. */
+	  strcpy (tbuf, linkbuf);
+	  tbuf[linklen] = '/';
+	  strcpy (tbuf + linklen, p);
+	  strcpy (workpath, tbuf);
+
+	  if (ABSPATH(linkbuf))
+	    {
+	      q = result;
+	      /* Duplicating some code here... */
+#if defined (__CYGWIN__)
+	      qbase = (ISALPHA((unsigned char)workpath[0]) && workpath[1] == ':') ? workpath + 3 : workpath + 1;
+#else
+	      qbase = workpath + 1;
+#endif
+	      double_slash_path = DOUBLE_SLASH (workpath);
+	      qbase += double_slash_path;
+    
+	      for (p = workpath; p < qbase; )
+		*q++ = *p++;
+	      qbase = q;
+	    }
+	  else
+	    {
+	      p = workpath;
+	      q = qsave;
+	    }
+	}
+    }
+
+  *q = '\0';
+  free (workpath);
+
+  /* If the result starts with `//', but the original path does not, we
+     can turn the // into /.  Because of how we set `qbase', this should never
+     be true, but it's a sanity check. */
+  if (DOUBLE_SLASH(result) && double_slash_path == 0)
+    {
+      if (result[2] == '\0')	/* short-circuit for bare `//' */
+	result[1] = '\0';
+      else
+	memmove (result, result + 1, strlen (result + 1) + 1);
+    }
+
+  return (result);
+}
+
+char *
+sh_realpath (pathname, resolved)
+     const char *pathname;
+     char *resolved;
+{
+  char *tdir, *wd;
+
+  if (pathname == 0 || *pathname == '\0')
+    {
+      errno = (pathname == 0) ? EINVAL : ENOENT;
+      return ((char *)NULL);
+    }
+
+  if (ABSPATH (pathname) == 0)
+    {
+      wd = get_working_directory ("sh_realpath");
+      if (wd == 0)
+	return ((char *)NULL);
+      tdir = sh_makepath (wd, (char *)pathname, 0);
+      free (wd);
+    }
+  else
+    tdir = savestring (pathname);
+
+  wd = sh_physpath (tdir, 0);
+  free (tdir);
+
+  if (resolved == 0)
+    return (wd);
+
+  if (wd)
+    {
+      strncpy (resolved, wd, PATH_MAX - 1);
+      resolved[PATH_MAX - 1] = '\0';
+      free (wd);
+      return resolved;
+    }
+  else
+    {
+      resolved[0] = '\0';
+      return wd;
+    }
+}
diff --git a/lib/sh/random.c b/lib/sh/random.c
new file mode 100644
index 0000000..1eaa71a
--- /dev/null
+++ b/lib/sh/random.c
@@ -0,0 +1,240 @@
+/* random.c -- Functions for managing 16-bit and 32-bit random numbers. */
+
+/* Copyright (C) 2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include "bashtypes.h"
+
+#if defined (HAVE_SYS_RANDOM_H)
+#  include <sys/random.h>
+#endif
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+#include "filecntl.h"
+
+#include <stdio.h>
+#include "bashansi.h"
+
+#include "shell.h"
+
+extern time_t shell_start_time;
+
+extern int last_random_value;
+
+static u_bits32_t intrand32 PARAMS((u_bits32_t));
+static u_bits32_t genseed PARAMS((void));
+
+static u_bits32_t brand32 PARAMS((void));
+static void sbrand32 PARAMS((u_bits32_t));
+static void perturb_rand32 PARAMS((void));
+
+/* The random number seed.  You can change this by setting RANDOM. */
+static u_bits32_t rseed = 1;
+
+/* Returns a 32-bit pseudo-random number. */
+static u_bits32_t
+intrand32 (last)
+     u_bits32_t last;
+{
+  /* Minimal Standard generator from
+     "Random number generators: good ones are hard to find",
+     Park and Miller, Communications of the ACM, vol. 31, no. 10,
+     October 1988, p. 1195. Filtered through FreeBSD.
+
+     x(n+1) = 16807 * x(n) mod (m).
+
+     We split up the calculations to avoid overflow.
+
+     h = last / q; l = x - h * q; t = a * l - h * r
+     m = 2147483647, a = 16807, q = 127773, r = 2836
+
+     There are lots of other combinations of constants to use; look at
+     https://www.gnu.org/software/gsl/manual/html_node/Other-random-number-generators.html#Other-random-number-generators */
+
+  bits32_t h, l, t;
+  u_bits32_t ret;
+
+  /* Can't seed with 0. */
+  ret = (last == 0) ? 123459876 : last;
+  h = ret / 127773;
+  l = ret - (127773 * h);
+  t = 16807 * l - 2836 * h;
+  ret = (t < 0) ? t + 0x7fffffff : t;
+
+  return (ret);
+}
+
+static u_bits32_t
+genseed ()
+{
+  struct timeval tv;
+  u_bits32_t iv;
+
+  gettimeofday (&tv, NULL);
+  iv = (u_bits32_t)seedrand;		/* let the compiler truncate */
+  iv = tv.tv_sec ^ tv.tv_usec ^ getpid () ^ getppid () ^ current_user.uid ^ iv;
+  return (iv);
+}
+
+#define BASH_RAND_MAX	32767		/* 0x7fff - 16 bits */
+
+/* Returns a pseudo-random number between 0 and 32767. */
+int
+brand ()
+{
+  unsigned int ret;
+
+  rseed = intrand32 (rseed);
+  if (shell_compatibility_level > 50)
+    ret = (rseed >> 16) ^ (rseed & 65535);
+  else
+    ret = rseed;
+  return (ret & BASH_RAND_MAX);
+}
+
+/* Set the random number generator seed to SEED. */
+void
+sbrand (seed)
+     unsigned long seed;
+{
+  rseed = seed;
+  last_random_value = 0;
+}
+
+void
+seedrand ()
+{
+  u_bits32_t iv;
+
+  iv = genseed ();
+  sbrand (iv);
+}
+
+static u_bits32_t rseed32 = 1073741823;
+static int last_rand32;
+
+static int urandfd = -1;
+
+#define BASH_RAND32_MAX	0x7fffffff	/* 32 bits */
+
+/* Returns a 32-bit pseudo-random number between 0 and 4294967295. */
+static u_bits32_t
+brand32 ()
+{
+  u_bits32_t ret;
+
+  rseed32 = intrand32 (rseed32);
+  return (rseed32 & BASH_RAND32_MAX);
+}
+
+static void
+sbrand32 (seed)
+     u_bits32_t seed;
+{
+  last_rand32 = rseed32 = seed;
+}
+
+void
+seedrand32 ()
+{
+  u_bits32_t iv;
+
+  iv = genseed ();
+  sbrand32 (iv);
+}
+
+static void
+perturb_rand32 ()
+{
+  rseed32 ^= genseed ();
+}
+
+/* Force another attempt to open /dev/urandom on the next call to get_urandom32 */
+void
+urandom_close ()
+{
+  if (urandfd >= 0)
+    close (urandfd);
+  urandfd = -1;
+}
+
+#if !defined (HAVE_GETRANDOM)
+/* Imperfect emulation of getrandom(2). */
+#ifndef GRND_NONBLOCK
+#  define GRND_NONBLOCK 1
+#  define GRND_RANDOM 2
+#endif
+
+static ssize_t
+getrandom (buf, len, flags)
+     void *buf;
+     size_t len;
+     unsigned int flags;
+{
+  int oflags;
+  ssize_t r;
+  static int urand_unavail = 0;
+
+#if HAVE_GETENTROPY
+  r = getentropy (buf, len);
+  return (r == 0) ? len : -1;
+#endif
+
+  if (urandfd == -1 && urand_unavail == 0)
+    {
+      oflags = O_RDONLY;
+      if (flags & GRND_NONBLOCK)
+	oflags |= O_NONBLOCK;
+      urandfd = open ("/dev/urandom", oflags, 0);
+      if (urandfd >= 0)
+	SET_CLOSE_ON_EXEC (urandfd);
+      else
+	{
+	  urand_unavail = 1;
+	  return -1;
+	}
+    }
+  if (urandfd >= 0 && (r = read (urandfd, buf, len)) == len)
+    return (r);
+  return -1;
+}
+#endif
+      
+u_bits32_t
+get_urandom32 ()
+{
+  u_bits32_t ret;
+
+  if (getrandom ((void *)&ret, sizeof (ret), GRND_NONBLOCK) == sizeof (ret))
+    return (last_rand32 = ret);
+
+#if defined (HAVE_ARC4RANDOM)
+  ret = arc4random ();
+#else
+  if (subshell_environment)
+    perturb_rand32 ();
+  do
+    ret = brand32 ();
+  while (ret == last_rand32);
+#endif
+  return (last_rand32 = ret);
+}
diff --git a/lib/sh/rename.c b/lib/sh/rename.c
new file mode 100644
index 0000000..e410b5e
--- /dev/null
+++ b/lib/sh/rename.c
@@ -0,0 +1,76 @@
+/*
+ * rename - rename a file
+ */
+
+/* Copyright (C) 1999 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if !defined (HAVE_RENAME)
+
+#include <bashtypes.h>
+#include <posixstat.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+#include <errno.h>
+
+#include <stdc.h>
+
+#ifndef errno
+extern int errno;
+#endif
+
+int
+rename (from, to)
+     const char *from, *to;
+{
+  struct stat fb, tb;
+
+  if (stat (from, &fb) < 0)
+    return -1;  
+
+  if (stat (to, &tb) < 0)
+    {
+      if (errno != ENOENT)
+	return -1;
+    }
+  else
+    {
+      if (fb.st_dev == tb.st_dev && fb.st_ino == tb.st_ino)
+        return 0;		/* same file */
+      if (unlink (to) < 0 && errno != ENOENT)
+        return -1;
+    }
+
+  if (link (from, to) < 0)
+    return (-1);
+
+  if (unlink (from) < 0 && errno != ENOENT)
+    {
+      int e = errno;
+      unlink (to);
+      errno = e;
+      return (-1);
+    }
+
+  return (0);
+}
+#endif /* !HAVE_RENAME */
diff --git a/lib/sh/setlinebuf.c b/lib/sh/setlinebuf.c
new file mode 100644
index 0000000..6473ddf
--- /dev/null
+++ b/lib/sh/setlinebuf.c
@@ -0,0 +1,63 @@
+/* setlinebuf.c - line-buffer a stdio stream. */
+
+/* Copyright (C) 1997 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#include <stdio.h>
+
+#include <xmalloc.h>
+
+#if defined (USING_BASH_MALLOC)
+#  define LBUF_BUFSIZE	1008
+#else
+#  define LBUF_BUFSIZE	BUFSIZ
+#endif
+
+/* Cause STREAM to buffer lines as opposed to characters or blocks. */
+int
+sh_setlinebuf (stream)
+     FILE *stream;
+{
+  char *local_linebuf;
+
+#if !defined (HAVE_SETLINEBUF) && !defined (HAVE_SETVBUF)
+  return (0);
+#endif
+
+#if defined (USING_BASH_MALLOC)
+  local_linebuf = (char *)xmalloc (LBUF_BUFSIZE);
+#else
+  local_linebuf = (char *)NULL;
+#endif
+
+#if defined (HAVE_SETVBUF)
+
+#  if defined (SETVBUF_REVERSED)
+  return (setvbuf (stream, _IOLBF, local_linebuf, LBUF_BUFSIZE));
+#  else /* !SETVBUF_REVERSED */
+  return (setvbuf (stream, local_linebuf, _IOLBF, LBUF_BUFSIZE));
+#  endif /* !SETVBUF_REVERSED */
+# else /* !HAVE_SETVBUF */
+
+  setlinebuf (stream);
+  return (0);
+
+#endif /* !HAVE_SETVBUF */
+}
diff --git a/lib/sh/shmatch.c b/lib/sh/shmatch.c
new file mode 100644
index 0000000..d6e7f90
--- /dev/null
+++ b/lib/sh/shmatch.c
@@ -0,0 +1,123 @@
+/*
+ * shmatch.c -- shell interface to posix regular expression matching.
+ */
+
+/* Copyright (C) 2003-2015 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef HAVE_CONFIG_H
+#  include <config.h>
+#endif
+
+#if defined (HAVE_POSIX_REGEXP)
+
+#ifdef HAVE_UNISTD_H
+#  include <unistd.h>
+#endif
+
+#include "bashansi.h"
+
+#include <stdio.h>
+#include <regex.h>
+
+#include "shell.h"
+#include "variables.h"
+#include "externs.h"
+
+extern int glob_ignore_case, match_ignore_case;
+
+int
+sh_regmatch (string, pattern, flags)
+     const char *string;
+     const char *pattern;
+     int flags;
+{
+  regex_t regex = { 0 };
+  regmatch_t *matches;
+  int rflags;
+#if defined (ARRAY_VARS)
+  SHELL_VAR *rematch;
+  ARRAY *amatch;
+  int subexp_ind;
+  char *subexp_str;
+  int subexp_len;
+#endif
+  int result;
+
+#if defined (ARRAY_VARS)
+  rematch = (SHELL_VAR *)NULL;
+#endif
+
+  rflags = REG_EXTENDED;
+  if (match_ignore_case)
+    rflags |= REG_ICASE;
+#if !defined (ARRAY_VARS)
+  rflags |= REG_NOSUB;
+#endif
+
+  if (regcomp (&regex, pattern, rflags))
+    return 2;		/* flag for printing a warning here. */
+
+#if defined (ARRAY_VARS)
+  matches = (regmatch_t *)malloc (sizeof (regmatch_t) * (regex.re_nsub + 1));
+#else
+  matches = NULL;
+#endif
+
+  /* man regexec: NULL PMATCH ignored if NMATCH == 0 */
+  if (regexec (&regex, string, matches ? regex.re_nsub + 1 : 0, matches, 0))
+    result = EXECUTION_FAILURE;
+  else
+    result = EXECUTION_SUCCESS;		/* match */
+
+#if defined (ARRAY_VARS)
+  subexp_len = strlen (string) + 10;
+  subexp_str = malloc (subexp_len + 1);
+
+  /* Store the parenthesized subexpressions in the array BASH_REMATCH.
+     Element 0 is the portion that matched the entire regexp.  Element 1
+     is the part that matched the first subexpression, and so on. */
+  unbind_variable_noref ("BASH_REMATCH");
+  rematch = make_new_array_variable ("BASH_REMATCH");
+  amatch = array_cell (rematch);
+
+  if (matches && (flags & SHMAT_SUBEXP) && result == EXECUTION_SUCCESS && subexp_str)
+    {
+      for (subexp_ind = 0; subexp_ind <= regex.re_nsub; subexp_ind++)
+	{
+	  memset (subexp_str, 0, subexp_len);
+	  strncpy (subexp_str, string + matches[subexp_ind].rm_so,
+		     matches[subexp_ind].rm_eo - matches[subexp_ind].rm_so);
+	  array_insert (amatch, subexp_ind, subexp_str);
+	}
+    }
+
+#if 0
+  VSETATTR (rematch, att_readonly);
+#endif
+
+  free (subexp_str);
+  free (matches);
+#endif /* ARRAY_VARS */
+
+  regfree (&regex);
+
+  return result;
+}
+
+#endif /* HAVE_POSIX_REGEXP */
diff --git a/lib/sh/shmbchar.c b/lib/sh/shmbchar.c
new file mode 100644
index 0000000..f2f2582
--- /dev/null
+++ b/lib/sh/shmbchar.c
@@ -0,0 +1,137 @@
+/* Copyright (C) 2001, 2006, 2009, 2010, 2012, 2015-2018 Free Software Foundation, Inc.
+
+   This program is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+
+#include <config.h>
+
+#if defined (HANDLE_MULTIBYTE)
+#include <stdlib.h>
+#include <limits.h>
+
+#include <errno.h>
+
+#include <shmbutil.h>
+#include <shmbchar.h>
+
+#ifndef errno
+extern int errno;
+#endif
+
+#if IS_BASIC_ASCII
+
+/* Bit table of characters in the ISO C "basic character set".  */
+const unsigned int is_basic_table [UCHAR_MAX / 32 + 1] =
+{
+  0x00001a00,           /* '\t' '\v' '\f' */
+  0xffffffef,           /* ' '...'#' '%'...'?' */
+  0xfffffffe,           /* 'A'...'Z' '[' '\\' ']' '^' '_' */
+  0x7ffffffe            /* 'a'...'z' '{' '|' '}' '~' */
+  /* The remaining bits are 0.  */
+};
+
+#endif /* IS_BASIC_ASCII */
+
+extern int locale_utf8locale;
+
+extern char *utf8_mbsmbchar (const char *);
+extern int utf8_mblen (const char *, size_t);
+
+/* Count the number of characters in S, counting multi-byte characters as a
+   single character. */
+size_t
+mbstrlen (s)
+     const char *s;
+{
+  size_t clen, nc;
+  mbstate_t mbs = { 0 }, mbsbak = { 0 };
+  int f, mb_cur_max;
+
+  nc = 0;
+  mb_cur_max = MB_CUR_MAX;
+  while (*s && (clen = (f = is_basic (*s)) ? 1 : mbrlen(s, mb_cur_max, &mbs)) != 0)
+    {
+      if (MB_INVALIDCH(clen))
+	{
+	  clen = 1;	/* assume single byte */
+	  mbs = mbsbak;
+	}
+
+      if (f == 0)
+	mbsbak = mbs;
+
+      s += clen;
+      nc++;
+    }
+  return nc;
+}
+
+/* Return pointer to first multibyte char in S, or NULL if none. */
+/* XXX - if we know that the locale is UTF-8, we can just check whether or
+   not any byte has the eighth bit turned on */
+char *
+mbsmbchar (s)
+     const char *s;
+{
+  char *t;
+  size_t clen;
+  mbstate_t mbs = { 0 };
+  int mb_cur_max;
+
+  if (locale_utf8locale)
+    return (utf8_mbsmbchar (s));	/* XXX */
+
+  mb_cur_max = MB_CUR_MAX;
+  for (t = (char *)s; *t; t++)
+    {
+      if (is_basic (*t))
+	continue;
+
+      if (locale_utf8locale)		/* not used if above code active */
+	clen = utf8_mblen (t, mb_cur_max);
+      else
+	clen = mbrlen (t, mb_cur_max, &mbs);
+
+      if (clen == 0)
+        return 0;
+      if (MB_INVALIDCH(clen))
+	continue;
+
+      if (clen > 1)
+	return t;
+    }
+  return 0;
+}
+
+int
+sh_mbsnlen(src, srclen, maxlen)
+     const char *src;
+     size_t srclen;
+     int maxlen;
+{
+  int count;
+  int sind;
+  DECLARE_MBSTATE;
+
+  for (sind = count = 0; src[sind]; )
+    {
+      count++;		/* number of multibyte characters */
+      ADVANCE_CHAR (src, srclen, sind);
+      if (sind > maxlen)
+        break;
+    }
+
+  return count;
+}
+#endif
diff --git a/lib/sh/shquote.c b/lib/sh/shquote.c
new file mode 100644
index 0000000..680f84e
--- /dev/null
+++ b/lib/sh/shquote.c
@@ -0,0 +1,431 @@
+/* shquote - functions to quote and dequote strings */
+
+/* Copyright (C) 1999-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include <stdc.h>
+
+#include "syntax.h"
+#include <xmalloc.h>
+
+#include "shmbchar.h"
+#include "shmbutil.h"
+
+extern char *ansic_quote PARAMS((char *, int, int *));
+extern int ansic_shouldquote PARAMS((const char *));
+
+/* Default set of characters that should be backslash-quoted in strings */
+static const char bstab[256] =
+  {
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 1, 1, 0, 0, 0, 0, 0,	/* TAB, NL */
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+
+    1, 1, 1, 0, 1, 0, 1, 1,	/* SPACE, !, DQUOTE, DOL, AMP, SQUOTE */
+    1, 1, 1, 0, 1, 0, 0, 0,	/* LPAR, RPAR, STAR, COMMA */
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 1, 1, 0, 1, 1,	/* SEMI, LESSTHAN, GREATERTHAN, QUEST */
+
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 1, 1, 1, 1, 0,	/* LBRACK, BS, RBRACK, CARAT */
+
+    1, 0, 0, 0, 0, 0, 0, 0,	/* BACKQ */
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 1, 1, 1, 0, 0,	/* LBRACE, BAR, RBRACE */
+
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+  };
+
+/* **************************************************************** */
+/*								    */
+/*	 Functions for quoting strings to be re-read as input	    */
+/*								    */
+/* **************************************************************** */
+
+/* Return a new string which is the single-quoted version of STRING.
+   Used by alias and trap, among others. */
+char *
+sh_single_quote (string)
+     const char *string;
+{
+  register int c;
+  char *result, *r;
+  const char *s;
+
+  result = (char *)xmalloc (3 + (4 * strlen (string)));
+  r = result;
+
+  if (string[0] == '\'' && string[1] == 0)
+    {
+      *r++ = '\\';
+      *r++ = '\'';
+      *r++ = 0;
+      return result;
+    }
+
+  *r++ = '\'';
+
+  for (s = string; s && (c = *s); s++)
+    {
+      *r++ = c;
+
+      if (c == '\'')
+	{
+	  *r++ = '\\';	/* insert escaped single quote */
+	  *r++ = '\'';
+	  *r++ = '\'';	/* start new quoted string */
+	}
+    }
+
+  *r++ = '\'';
+  *r = '\0';
+
+  return (result);
+}
+
+/* Quote STRING using double quotes.  Return a new string. */
+char *
+sh_double_quote (string)
+     const char *string;
+{
+  register unsigned char c;
+  int mb_cur_max;
+  char *result, *r;
+  size_t slen;
+  const char *s, *send;
+  DECLARE_MBSTATE;
+
+  slen = strlen (string);
+  send = string + slen;
+  mb_cur_max = MB_CUR_MAX;
+
+  result = (char *)xmalloc (3 + (2 * strlen (string)));
+  r = result;
+  *r++ = '"';
+
+  for (s = string; s && (c = *s); s++)
+    {
+      /* Backslash-newline disappears within double quotes, so don't add one. */
+      if ((sh_syntaxtab[c] & CBSDQUOTE) && c != '\n')
+	*r++ = '\\';
+
+#if defined (HANDLE_MULTIBYTE)
+      if ((locale_utf8locale && (c & 0x80)) ||
+	  (locale_utf8locale == 0 && mb_cur_max > 1 && is_basic (c) == 0))
+	{
+	  COPY_CHAR_P (r, s, send);
+	  s--;		/* compensate for auto-increment in loop above */
+	  continue;
+	}
+#endif
+
+      /* Assume that the string will not be further expanded, so no need to
+	 add CTLESC to protect CTLESC or CTLNUL. */
+      *r++ = c;
+    }
+
+  *r++ = '"';
+  *r = '\0';
+
+  return (result);
+}
+
+/* Turn S into a simple double-quoted string.  If FLAGS is non-zero, quote
+   double quote characters in S with backslashes. */
+char *
+sh_mkdoublequoted (s, slen, flags)
+     const char *s;
+     int slen, flags;
+{
+  char *r, *ret;
+  const char *send;
+  int rlen, mb_cur_max;
+  DECLARE_MBSTATE;
+
+  send = s + slen;
+  mb_cur_max = flags ? MB_CUR_MAX : 1;
+  rlen = (flags == 0) ? slen + 3 : (2 * slen) + 1;
+  ret = r = (char *)xmalloc (rlen);
+
+  *r++ = '"';
+  while (*s)
+    {
+      if (flags && *s == '"')
+	*r++ = '\\';
+
+#if defined (HANDLE_MULTIBYTE)
+      if  (flags && ((locale_utf8locale && (*s & 0x80)) ||
+		     (locale_utf8locale == 0 && mb_cur_max > 1 && is_basic (*s) == 0)))
+	{
+	  COPY_CHAR_P (r, s, send);
+	  continue;
+	}
+#endif
+      *r++ = *s++;
+    }
+  *r++ = '"';
+  *r = '\0';
+
+  return ret;
+}
+
+/* Remove backslashes that are quoting characters that are special between
+   double quotes.  Return a new string.  XXX - should this handle CTLESC
+   and CTLNUL? */
+char *
+sh_un_double_quote (string)
+     char *string;
+{
+  register int c, pass_next;
+  char *result, *r, *s;
+
+  r = result = (char *)xmalloc (strlen (string) + 1);
+
+  for (pass_next = 0, s = string; s && (c = *s); s++)
+    {
+      if (pass_next)
+	{
+	  *r++ = c;
+	  pass_next = 0;
+	  continue;
+	}
+      if (c == '\\' && (sh_syntaxtab[(unsigned char) s[1]] & CBSDQUOTE))
+	{
+	  pass_next = 1;
+	  continue;
+	}
+      *r++ = c;
+    }
+
+  *r = '\0';
+  return result;
+}
+
+/* Quote special characters in STRING using backslashes.  Return a new
+   string.  NOTE:  if the string is to be further expanded, we need a
+   way to protect the CTLESC and CTLNUL characters.  As I write this,
+   the current callers will never cause the string to be expanded without
+   going through the shell parser, which will protect the internal
+   quoting characters.  TABLE, if set, points to a map of the ascii code
+   set with char needing to be backslash-quoted if table[char]==1.  FLAGS,
+   if 1, causes tildes to be quoted as well.  If FLAGS&2, backslash-quote
+   other shell blank characters. */
+   
+char *
+sh_backslash_quote (string, table, flags)
+     char *string;
+     char *table;
+     int flags;
+{
+  int c, mb_cur_max;
+  size_t slen;
+  char *result, *r, *s, *backslash_table, *send;
+  DECLARE_MBSTATE;
+
+  slen = strlen (string);
+  send = string + slen;
+  result = (char *)xmalloc (2 * slen + 1);
+
+  backslash_table = table ? table : (char *)bstab;
+  mb_cur_max = MB_CUR_MAX;
+
+  for (r = result, s = string; s && (c = *s); s++)
+    {
+#if defined (HANDLE_MULTIBYTE)
+      /* XXX - isascii, even if is_basic(c) == 0 - works in most cases. */
+      if (c >= 0 && c <= 127 && backslash_table[(unsigned char)c] == 1)
+	{
+	  *r++ = '\\';
+	  *r++ = c;
+	  continue;
+	}
+      if ((locale_utf8locale && (c & 0x80)) ||
+	  (locale_utf8locale == 0 && mb_cur_max > 1 && is_basic (c) == 0))
+	{
+	  COPY_CHAR_P (r, s, send);
+	  s--;		/* compensate for auto-increment in loop above */
+	  continue;
+	}
+#endif
+      if (backslash_table[(unsigned char)c] == 1)
+	*r++ = '\\';
+      else if (c == '#' && s == string)			/* comment char */
+	*r++ = '\\';
+      else if ((flags&1) && c == '~' && (s == string || s[-1] == ':' || s[-1] == '='))
+        /* Tildes are special at the start of a word or after a `:' or `='
+	   (technically unquoted, but it doesn't make a difference in practice) */
+	*r++ = '\\';
+      else if ((flags&2) && shellblank((unsigned char)c))
+	*r++ = '\\';
+      *r++ = c;
+    }
+
+  *r = '\0';
+  return (result);
+}
+
+#if defined (PROMPT_STRING_DECODE)
+/* Quote characters that get special treatment when in double quotes in STRING
+   using backslashes.  Return a new string. */
+char *
+sh_backslash_quote_for_double_quotes (string)
+     char *string;
+{
+  unsigned char c;
+  char *result, *r, *s, *send;
+  size_t slen;
+  int mb_cur_max;
+  DECLARE_MBSTATE;
+ 
+  slen = strlen (string);
+  send = string + slen;
+  mb_cur_max = MB_CUR_MAX;
+  result = (char *)xmalloc (2 * slen + 1);
+
+  for (r = result, s = string; s && (c = *s); s++)
+    {
+      /* Backslash-newline disappears within double quotes, so don't add one. */
+      if ((sh_syntaxtab[c] & CBSDQUOTE) && c != '\n')
+	*r++ = '\\';
+      /* I should probably use the CSPECL flag for these in sh_syntaxtab[] */
+      else if (c == CTLESC || c == CTLNUL)
+	*r++ = CTLESC;		/* could be '\\'? */
+
+#if defined (HANDLE_MULTIBYTE)
+      if ((locale_utf8locale && (c & 0x80)) ||
+	  (locale_utf8locale == 0 && mb_cur_max > 1 && is_basic (c) == 0))
+	{
+	  COPY_CHAR_P (r, s, send);
+	  s--;		/* compensate for auto-increment in loop above */
+	  continue;
+	}
+#endif
+
+      *r++ = c;
+    }
+
+  *r = '\0';
+  return (result);
+}
+#endif /* PROMPT_STRING_DECODE */
+
+char *
+sh_quote_reusable (s, flags)
+     char *s;
+     int flags;
+{
+  char *ret;
+
+  if (s == 0)
+    return s;
+  else if (*s == 0)
+    {
+      ret = (char *)xmalloc (3);
+      ret[0] = ret[1] = '\'';
+      ret[2] = '\0';
+    }
+  else if (ansic_shouldquote (s))
+    ret = ansic_quote (s, 0, (int *)0);
+  else if (flags)
+    ret = sh_backslash_quote (s, 0, 1);
+  else
+    ret = sh_single_quote (s);
+
+  return ret;
+}
+
+int
+sh_contains_shell_metas (string)
+     const char *string;
+{
+  const char *s;
+
+  for (s = string; s && *s; s++)
+    {
+      switch (*s)
+	{
+	case ' ': case '\t': case '\n':		/* IFS white space */
+	case '\'': case '"': case '\\':		/* quoting chars */
+	case '|': case '&': case ';':		/* shell metacharacters */
+	case '(': case ')': case '<': case '>':
+	case '!': case '{': case '}':		/* reserved words */
+	case '*': case '[': case '?': case ']':	/* globbing chars */
+	case '^':
+	case '$': case '`':			/* expansion chars */
+	  return (1);
+	case '~':				/* tilde expansion */
+	  if (s == string || s[-1] == '=' || s[-1] == ':')
+	    return (1);
+	  break;
+	case '#':
+	  if (s == string)			/* comment char */
+	    return (1);
+	  /* FALLTHROUGH */
+	default:
+	  break;
+	}
+    }
+
+  return (0);
+}
+
+int
+sh_contains_quotes (string)
+     const char *string;
+{
+  const char *s;
+
+  for (s = string; s && *s; s++)
+    {
+      if (*s == '\'' || *s == '"' || *s == '\\')
+	return 1;
+    }
+  return 0;
+}
diff --git a/lib/sh/shtty.c b/lib/sh/shtty.c
new file mode 100644
index 0000000..0433f5e
--- /dev/null
+++ b/lib/sh/shtty.c
@@ -0,0 +1,330 @@
+/*
+ * shtty.c -- abstract interface to the terminal, focusing on capabilities.
+ */
+
+/* Copyright (C) 1999 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef HAVE_CONFIG_H
+#  include <config.h>
+#endif
+
+#ifdef HAVE_UNISTD_H
+#  include <unistd.h>
+#endif
+
+#include <shtty.h>
+
+static TTYSTRUCT ttin, ttout;
+static int ttsaved = 0;
+
+int
+ttgetattr(fd, ttp)
+int	fd;
+TTYSTRUCT *ttp;
+{
+#ifdef TERMIOS_TTY_DRIVER
+  return tcgetattr(fd, ttp);
+#else
+#  ifdef TERMIO_TTY_DRIVER
+  return ioctl(fd, TCGETA, ttp);
+#  else
+  return ioctl(fd, TIOCGETP, ttp);
+#  endif
+#endif
+}
+
+int
+ttsetattr(fd, ttp)
+int	fd;
+TTYSTRUCT *ttp;
+{
+#ifdef TERMIOS_TTY_DRIVER
+  return tcsetattr(fd, TCSADRAIN, ttp);
+#else
+#  ifdef TERMIO_TTY_DRIVER
+  return ioctl(fd, TCSETAW, ttp);
+#  else
+  return ioctl(fd, TIOCSETN, ttp);
+#  endif
+#endif
+}
+
+void
+ttsave()
+{
+  if (ttsaved)
+   return;
+  ttgetattr (0, &ttin);
+  ttgetattr (1, &ttout);
+  ttsaved = 1;
+}
+
+void
+ttrestore()
+{
+  if (ttsaved == 0)
+    return;
+  ttsetattr (0, &ttin);
+  ttsetattr (1, &ttout);
+  ttsaved = 0;
+}
+
+/* Retrieve the internally-saved attributes associated with tty fd FD. */
+TTYSTRUCT *
+ttattr (fd)
+     int fd;
+{
+  if (ttsaved == 0)
+    return ((TTYSTRUCT *)0);
+  if (fd == 0)
+    return &ttin;
+  else if (fd == 1)
+    return &ttout;
+  else
+    return ((TTYSTRUCT *)0);
+}
+
+/*
+ * Change attributes in ttp so that when it is installed using
+ * ttsetattr, the terminal will be in one-char-at-a-time mode.
+ */
+int
+tt_setonechar(ttp)
+     TTYSTRUCT *ttp;
+{
+#if defined (TERMIOS_TTY_DRIVER) || defined (TERMIO_TTY_DRIVER)
+
+  /* XXX - might not want this -- it disables erase and kill processing. */
+  ttp->c_lflag &= ~ICANON;
+
+  ttp->c_lflag |= ISIG;
+#  ifdef IEXTEN
+  ttp->c_lflag |= IEXTEN;
+#  endif
+
+  ttp->c_iflag |= ICRNL;	/* make sure we get CR->NL on input */
+  ttp->c_iflag &= ~INLCR;	/* but no NL->CR */
+
+#  ifdef OPOST
+  ttp->c_oflag |= OPOST;
+#  endif
+#  ifdef ONLCR
+  ttp->c_oflag |= ONLCR;
+#  endif
+#  ifdef OCRNL
+  ttp->c_oflag &= ~OCRNL;
+#  endif
+#  ifdef ONOCR
+  ttp->c_oflag &= ~ONOCR;
+#  endif
+#  ifdef ONLRET
+  ttp->c_oflag &= ~ONLRET;
+#  endif
+
+  ttp->c_cc[VMIN] = 1;
+  ttp->c_cc[VTIME] = 0;
+
+#else
+
+  ttp->sg_flags |= CBREAK;
+
+#endif
+
+  return 0;
+}
+
+/* Set the tty associated with FD and TTP into one-character-at-a-time mode */
+int
+ttfd_onechar (fd, ttp)
+     int fd;
+     TTYSTRUCT *ttp;
+{
+  if (tt_setonechar(ttp) < 0)
+    return -1;
+  return (ttsetattr (fd, ttp));
+}
+
+/* Set the terminal into one-character-at-a-time mode */
+int
+ttonechar ()
+{
+  TTYSTRUCT tt;
+
+  if (ttsaved == 0)
+    return -1;
+  tt = ttin;
+  return (ttfd_onechar (0, &tt));
+}
+
+/*
+ * Change attributes in ttp so that when it is installed using
+ * ttsetattr, the terminal will be in no-echo mode.
+ */
+int
+tt_setnoecho(ttp)
+     TTYSTRUCT *ttp;
+{
+#if defined (TERMIOS_TTY_DRIVER) || defined (TERMIO_TTY_DRIVER)
+  ttp->c_lflag &= ~(ECHO|ECHOK|ECHONL);
+#else
+  ttp->sg_flags &= ~ECHO;
+#endif
+
+  return 0;
+}
+
+/* Set the tty associated with FD and TTP into no-echo mode */
+int
+ttfd_noecho (fd, ttp)
+     int fd;
+     TTYSTRUCT *ttp;
+{
+  if (tt_setnoecho (ttp) < 0)
+    return -1;
+  return (ttsetattr (fd, ttp));
+}
+
+/* Set the terminal into no-echo mode */
+int
+ttnoecho ()
+{
+  TTYSTRUCT tt;
+
+  if (ttsaved == 0)
+    return -1;
+  tt = ttin;
+  return (ttfd_noecho (0, &tt));
+}
+
+/*
+ * Change attributes in ttp so that when it is installed using
+ * ttsetattr, the terminal will be in eight-bit mode (pass8).
+ */
+int
+tt_seteightbit (ttp)
+     TTYSTRUCT *ttp;
+{
+#if defined (TERMIOS_TTY_DRIVER) || defined (TERMIO_TTY_DRIVER)
+  ttp->c_iflag &= ~ISTRIP;
+  ttp->c_cflag |= CS8;
+  ttp->c_cflag &= ~PARENB;
+#else
+  ttp->sg_flags |= ANYP;
+#endif
+
+  return 0;
+}
+
+/* Set the tty associated with FD and TTP into eight-bit mode */
+int
+ttfd_eightbit (fd, ttp)
+     int fd;
+     TTYSTRUCT *ttp;
+{
+  if (tt_seteightbit (ttp) < 0)
+    return -1;
+  return (ttsetattr (fd, ttp));
+}
+
+/* Set the terminal into eight-bit mode */
+int
+tteightbit ()
+{
+  TTYSTRUCT tt;
+
+  if (ttsaved == 0)
+    return -1;
+  tt = ttin;
+  return (ttfd_eightbit (0, &tt));
+}
+
+/*
+ * Change attributes in ttp so that when it is installed using
+ * ttsetattr, the terminal will be in non-canonical input mode.
+ */
+int
+tt_setnocanon (ttp)
+     TTYSTRUCT *ttp;
+{
+#if defined (TERMIOS_TTY_DRIVER) || defined (TERMIO_TTY_DRIVER)
+  ttp->c_lflag &= ~ICANON;
+#endif
+
+  return 0;
+}
+
+/* Set the tty associated with FD and TTP into non-canonical mode */
+int
+ttfd_nocanon (fd, ttp)
+     int fd;
+     TTYSTRUCT *ttp;
+{
+  if (tt_setnocanon (ttp) < 0)
+    return -1;
+  return (ttsetattr (fd, ttp));
+}
+
+/* Set the terminal into non-canonical mode */
+int
+ttnocanon ()
+{
+  TTYSTRUCT tt;
+
+  if (ttsaved == 0)
+    return -1;
+  tt = ttin;
+  return (ttfd_nocanon (0, &tt));
+}
+
+/*
+ * Change attributes in ttp so that when it is installed using
+ * ttsetattr, the terminal will be in cbreak, no-echo mode.
+ */
+int
+tt_setcbreak(ttp)
+     TTYSTRUCT *ttp;
+{
+  if (tt_setonechar (ttp) < 0)
+    return -1;
+  return (tt_setnoecho (ttp));
+}
+
+/* Set the tty associated with FD and TTP into cbreak (no-echo,
+   one-character-at-a-time) mode */
+int
+ttfd_cbreak (fd, ttp)
+     int fd;
+     TTYSTRUCT *ttp;
+{
+  if (tt_setcbreak (ttp) < 0)
+    return -1;
+  return (ttsetattr (fd, ttp));
+}
+
+/* Set the terminal into cbreak (no-echo, one-character-at-a-time) mode */
+int
+ttcbreak ()
+{
+  TTYSTRUCT tt;
+
+  if (ttsaved == 0)
+    return -1;
+  tt = ttin;
+  return (ttfd_cbreak (0, &tt));
+}
diff --git a/lib/sh/snprintf.c b/lib/sh/snprintf.c
new file mode 100644
index 0000000..406a3a5
--- /dev/null
+++ b/lib/sh/snprintf.c
@@ -0,0 +1,2221 @@
+/* snprintf - formatted output to strings, with bounds checking and allocation */
+
+/*
+ build a test version with
+   gcc -g -DDRIVER -I../.. -I../../include -o test-snprintf snprintf.c fmtu*long.o
+*/
+ 
+/*
+   Unix snprintf implementation.
+   derived from inetutils/libinetutils/snprintf.c Version 1.1
+
+   Copyright (C) 2001-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+   
+   Original (pre-bash) Revision History:
+
+   1.1:
+      *  added changes from Miles Bader
+      *  corrected a bug with %f
+      *  added support for %#g
+      *  added more comments :-)
+   1.0:
+      *  supporting must ANSI syntaxic_sugars
+   0.0:
+      *  support %s %c %d
+
+ THANKS(for the patches and ideas):
+     Miles Bader
+     Cyrille Rustom
+     Jacek Slabocewiz
+     Mike Parker(mouse)
+
+*/
+
+/*
+ * Currently doesn't handle (and bash/readline doesn't use):
+ *	* *M$ width, precision specifications
+ *	* %N$ numbered argument conversions
+ *	* support for `F' is imperfect with ldfallback(), since underlying
+ *	  printf may not handle it -- should ideally have another autoconf test
+ */
+
+#define FLOATING_POINT
+
+#ifdef HAVE_CONFIG_H
+#  include <config.h>
+#endif
+
+/* GCC 4.2 on Snow Leopard doesn't like the snprintf prototype */
+#if defined(DEBUG) && !defined (MACOSX)
+#  undef HAVE_SNPRINTF
+#  undef HAVE_ASPRINTF
+
+#  define HAVE_SNPRINTF 0
+#  define HAVE_ASPRINTF 0
+#endif
+
+#if defined(DRIVER) && !defined(HAVE_CONFIG_H)
+#define HAVE_LONG_LONG
+#define HAVE_LONG_DOUBLE
+#ifdef __linux__
+#define HAVE_PRINTF_A_FORMAT
+#endif
+#define HAVE_ISINF_IN_LIBC
+#define HAVE_ISNAN_IN_LIBC
+#define PREFER_STDARG
+#define HAVE_STRINGIZE
+#define HAVE_LIMITS_H
+#define HAVE_STDDEF_H
+#define HAVE_LOCALE_H
+#define intmax_t long
+#endif
+
+#if !HAVE_SNPRINTF || !HAVE_ASPRINTF
+
+#include <bashtypes.h>
+
+#if defined(PREFER_STDARG)
+#  include <stdarg.h>
+#else
+#  include <varargs.h>
+#endif
+
+#ifdef HAVE_LIMITS_H
+#  include <limits.h>
+#endif
+#include <bashansi.h>
+#ifdef HAVE_STDDEF_H
+#  include <stddef.h>
+#endif
+#include <chartypes.h>
+
+#ifdef HAVE_STDINT_H
+#  include <stdint.h>
+#endif
+
+#ifdef FLOATING_POINT
+#  include <float.h>	/* for manifest constants */
+#  include <stdio.h>	/* for sprintf */
+#endif
+
+#include <typemax.h>
+
+#ifdef HAVE_LOCALE_H
+#  include <locale.h>
+#endif
+
+#include "stdc.h"
+#include <shmbutil.h>
+
+#ifndef DRIVER
+#  include "shell.h"
+#else
+#  define FL_PREFIX     0x01    /* add 0x, 0X, or 0 prefix as appropriate */
+#  define FL_ADDBASE    0x02    /* add base# prefix to converted value */
+#  define FL_HEXUPPER   0x04    /* use uppercase when converting to hex */
+#  define FL_UNSIGNED   0x08    /* don't add any sign */
+extern char *fmtulong PARAMS((unsigned long int, int, char *, size_t, int));
+extern char *fmtullong PARAMS((unsigned long long int, int, char *, size_t, int));
+#endif
+
+#ifndef FREE
+#  define FREE(x)	if (x) free (x)
+#endif
+
+/* Bound on length of the string representing an integer value of type T.
+   Subtract one for the sign bit if T is signed;
+   302 / 1000 is log10 (2) rounded up;
+   add one for integer division truncation;
+   add one more for a minus sign if t is signed.  */
+#ifndef INT_STRLEN_BOUND
+#define INT_STRLEN_BOUND(t) \
+  ((sizeof (t) * CHAR_BIT - TYPE_SIGNED (t)) * 302 / 1000 \
+     + 1 + TYPE_SIGNED (t))
+#endif
+
+/* conversion flags */
+#define PF_ALTFORM	0x00001		/* # */
+#define PF_HEXPREFIX	0x00002		/* 0[Xx] */
+#define PF_LADJUST	0x00004		/* - */
+#define PF_ZEROPAD	0x00008		/* 0 */
+#define PF_PLUS		0x00010		/* + */
+#define PF_SPACE	0x00020		/* ' ' */
+#define PF_THOUSANDS	0x00040		/* ' */
+
+#define PF_DOT		0x00080		/* `.precision' */
+#define PF_STAR_P	0x00100		/* `*' after precision */
+#define PF_STAR_W	0x00200		/* `*' before or without precision */
+
+/* length modifiers */
+#define PF_SIGNEDCHAR	0x00400		/* hh */
+#define PF_SHORTINT	0x00800		/* h */
+#define PF_LONGINT	0x01000		/* l */
+#define PF_LONGLONG	0x02000		/* ll */
+#define PF_LONGDBL	0x04000		/* L */
+#define PF_INTMAX_T	0x08000		/* j */
+#define PF_SIZE_T	0x10000		/* z */
+#define PF_PTRDIFF_T	0x20000		/* t */
+
+#define PF_ALLOCBUF	0x40000		/* for asprintf, vasprintf */
+
+#define PFM_SN		0x01		/* snprintf, vsnprintf */
+#define PFM_AS		0x02		/* asprintf, vasprintf */
+
+#define ASBUFSIZE	128
+
+#define x_digs	"0123456789abcdef"
+#define X_digs	"0123456789ABCDEF"
+
+static char intbuf[INT_STRLEN_BOUND(unsigned long) + 1];
+
+static int decpoint;
+static int thoussep;
+static char *grouping;
+
+/* 
+ * For the FLOATING POINT FORMAT :
+ *  the challenge was finding a way to
+ *  manipulate the Real numbers without having
+ *  to resort to mathematical function(it
+ *  would require to link with -lm) and not
+ *  going down to the bit pattern(not portable)
+ *
+ *  so a number, a real is:
+
+      real = integral + fraction
+
+      integral = ... + a(2)*10^2 + a(1)*10^1 + a(0)*10^0
+      fraction = b(1)*10^-1 + b(2)*10^-2 + ...
+
+      where:
+       0 <= a(i) => 9 
+       0 <= b(i) => 9 
+ 
+    from then it was simple math
+ */
+
+/*
+ * size of the buffer for the integral part
+ * and the fraction part 
+ */
+#define MAX_INT  99 + 1 /* 1 for the null */
+#define MAX_FRACT 307 + 1
+
+/* 
+ * These functions use static buffers to store the results,
+ * and so are not reentrant
+ */
+#define itoa(n) fmtulong(n, 10, intbuf, sizeof(intbuf), 0);
+#define dtoa(n, p, f) numtoa(n, 10, p, f)
+
+#define SWAP_INT(a,b) {int t; t = (a); (a) = (b); (b) = t;}
+
+#define GETARG(type)	(va_arg(args, type))
+
+/* Macros that do proper sign extension and handle length modifiers.  Used
+   for the integer conversion specifiers. */
+#define GETSIGNED(p) \
+  (((p)->flags & PF_LONGINT) \
+	? GETARG (long) \
+  	: (((p)->flags & PF_SHORTINT) ? (long)(short)GETARG (int) \
+				      : (long)GETARG (int)))
+
+#define GETUNSIGNED(p) \
+  (((p)->flags & PF_LONGINT) \
+	? GETARG (unsigned long) \
+	: (((p)->flags & PF_SHORTINT) ? (unsigned long)(unsigned short)GETARG (int) \
+				      : (unsigned long)GETARG (unsigned int)))
+
+
+#ifdef HAVE_LONG_DOUBLE
+#define GETLDOUBLE(p) GETARG (long double)
+#endif
+#define GETDOUBLE(p) GETARG (double)
+
+#define SET_SIZE_FLAGS(p, type) \
+  if (sizeof (type) > sizeof (int)) \
+    (p)->flags |= PF_LONGINT; \
+  if (sizeof (type) > sizeof (long)) \
+    (p)->flags |= PF_LONGLONG;
+
+/* this struct holds everything we need */
+struct DATA
+{
+  int length;
+  char *base;		/* needed for [v]asprintf */
+  char *holder;
+  int counter;
+  const char *pf;
+
+/* FLAGS */
+  int flags;
+  int justify;
+  int width, precision;
+  char pad;
+};
+
+/* the floating point stuff */
+#ifdef FLOATING_POINT
+static double pow_10 PARAMS((int));
+static int log_10 PARAMS((double));
+static double integral PARAMS((double, double *));
+static char *numtoa PARAMS((double, int, int, char **));
+#endif
+
+static void init_data PARAMS((struct DATA *, char *, size_t, const char *, int));
+static void init_conv_flag PARAMS((struct DATA *));
+
+/* for the format */
+#ifdef FLOATING_POINT
+static void floating PARAMS((struct DATA *, double));
+static void exponent PARAMS((struct DATA *, double));
+#endif
+static void number PARAMS((struct DATA *, unsigned long, int));
+#ifdef HAVE_LONG_LONG
+static void lnumber PARAMS((struct DATA *, unsigned long long, int));
+#endif
+static void pointer PARAMS((struct DATA *, unsigned long));
+static void strings PARAMS((struct DATA *, char *));
+
+#ifdef FLOATING_POINT
+#  define FALLBACK_FMTSIZE	32
+#  define FALLBACK_BASE		4096
+#  define LFALLBACK_BASE	5120
+#  ifdef HAVE_LONG_DOUBLE
+static void ldfallback PARAMS((struct DATA *, const char *, const char *, long double));
+#  endif
+static void dfallback PARAMS((struct DATA *, const char *, const char *, double));
+#endif
+
+static char *groupnum PARAMS((char *));
+
+#if defined (HAVE_LONG_DOUBLE)
+#  define LONGDOUBLE long double
+#else
+#  define LONGDOUBLE double
+#endif
+
+#ifndef isnan
+  static inline int isnan_f  (float       x) { return x != x; }
+  static inline int isnan_d  (double      x) { return x != x; }
+  static inline int isnan_ld (LONGDOUBLE  x) { return x != x; }
+  # define isnan(x) \
+      (sizeof (x) == sizeof (LONGDOUBLE) ? isnan_ld (x) \
+       : sizeof (x) == sizeof (double) ? isnan_d (x) \
+       : isnan_f (x))
+#endif
+  
+#ifndef isinf
+  static inline int isinf_f  (float       x) { return !isnan (x) && isnan (x - x); }
+  static inline int isinf_d  (double      x) { return !isnan (x) && isnan (x - x); }
+  static inline int isinf_ld (LONGDOUBLE  x) { return !isnan (x) && isnan (x - x); }
+  # define isinf(x) \
+      (sizeof (x) == sizeof (LONGDOUBLE) ? isinf_ld (x) \
+       : sizeof (x) == sizeof (double) ? isinf_d (x) \
+       : isinf_f (x))
+#endif
+
+#ifdef DRIVER
+static void memory_error_and_abort ();
+static void *xmalloc PARAMS((size_t));
+static void *xrealloc PARAMS((void *, size_t));
+static void xfree PARAMS((void *));
+#else
+#  include <xmalloc.h>
+#endif
+
+/* those are defines specific to snprintf to hopefully
+ * make the code clearer :-)
+ */
+#define RIGHT 1
+#define LEFT  0
+#define NOT_FOUND -1
+#define FOUND 1
+#define MAX_FIELD 15
+
+/* round off to the precision */
+#define ROUND(d, p) \
+	    (d < 0.) ? \
+	     d - pow_10(-(p)->precision) * 0.5 : \
+	     d + pow_10(-(p)->precision) * 0.5
+
+/* set default precision */
+#define DEF_PREC(p) \
+	    if ((p)->precision == NOT_FOUND) \
+	      (p)->precision = 6
+
+/* put a char.  increment the number of chars written even if we've exceeded
+   the vsnprintf/snprintf buffer size (for the return value) */
+#define PUT_CHAR(c, p) \
+	do \
+	  { \
+	    if (((p)->flags & PF_ALLOCBUF) && ((p)->counter >= (p)->length - 1)) \
+	      { \
+		(p)->length += ASBUFSIZE; \
+		(p)->base = (char *)xrealloc((p)->base, (p)->length); \
+		(p)->holder = (p)->base + (p)->counter; /* in case reallocated */ \
+	      } \
+	    if ((p)->counter < (p)->length) \
+	      *(p)->holder++ = (c); \
+	    (p)->counter++; \
+	  } \
+	while (0)
+
+/* Output a string.  P->WIDTH has already been adjusted for padding. */
+#define PUT_STRING(string, len, p) \
+	do \
+	  { \
+	    PAD_RIGHT (p); \
+	    while ((len)-- > 0) \
+	      { \
+		PUT_CHAR (*(string), (p)); \
+		(string)++; \
+	      } \
+	    PAD_LEFT (p); \
+	  } \
+	while (0)
+
+#define PUT_PLUS(d, p, zero) \
+	    if (((p)->flags & PF_PLUS) && (d) > zero) \
+	      PUT_CHAR('+', p)
+
+#define PUT_SPACE(d, p, zero) \
+	    if (((p)->flags & PF_SPACE) && (d) > zero) \
+	      PUT_CHAR(' ', p)
+
+/* pad right */ 
+#define PAD_RIGHT(p) \
+	    if ((p)->width > 0 && (p)->justify != LEFT) \
+	      for (; (p)->width > 0; (p)->width--) \
+		 PUT_CHAR((p)->pad, p)
+
+/* pad left */
+#define PAD_LEFT(p) \
+	    if ((p)->width > 0 && (p)->justify == LEFT) \
+	      for (; (p)->width > 0; (p)->width--) \
+		 PUT_CHAR((p)->pad, p)
+
+/* pad with zeros from decimal precision */
+#define PAD_ZERO(p) \
+	if ((p)->precision > 0) \
+	  for (; (p)->precision > 0; (p)->precision--) \
+	    PUT_CHAR('0', p)
+
+/* if width and prec. in the args */
+#define STAR_ARGS(p) \
+	do { \
+	    if ((p)->flags & PF_STAR_W) \
+	      { \
+		(p)->width = GETARG (int); \
+		if ((p)->width < 0) \
+		  { \
+		    (p)->flags |= PF_LADJUST; \
+		    (p)->justify = LEFT; \
+		    (p)->width = -(p)->width; \
+		  } \
+	      } \
+	    if ((p)->flags & PF_STAR_P) \
+	      { \
+		(p)->precision = GETARG (int); \
+		if ((p)->precision < 0) \
+		  { \
+		    (p)->flags &= ~PF_STAR_P; \
+		    (p)->precision = NOT_FOUND; \
+		  } \
+	      } \
+	} while (0)
+
+#if defined (HAVE_LOCALE_H) && defined (HAVE_LOCALECONV)
+#  define GETLOCALEDATA(d, t, g) \
+      do \
+	{ \
+	  struct lconv *lv; \
+	  if ((d) == 0) { \
+	  (d) = '.'; (t) = -1; (g) = 0; /* defaults */ \
+	  lv = localeconv(); \
+	  if (lv) \
+	    { \
+	      if (lv->decimal_point && lv->decimal_point[0]) \
+		(d) = lv->decimal_point[0]; \
+	      if (lv->thousands_sep && lv->thousands_sep[0]) \
+		(t) = lv->thousands_sep[0]; \
+	      (g) = lv->grouping ? lv->grouping : ""; \
+	      if (*(g) == '\0' || *(g) == CHAR_MAX || (t) == -1) (g) = 0; \
+	    } \
+	  } \
+	} \
+      while (0);
+#else
+#  define GETLOCALEDATA(d, t, g) \
+      ( (d) = '.', (t) = ',', g = "\003" )
+#endif
+
+#ifdef FLOATING_POINT
+/*
+ * Find the nth power of 10
+ */
+static double
+pow_10(n)
+     int n;
+{ 
+  double P;
+
+  /* handle common cases with fast switch statement. */
+  switch (n)
+    {
+    case -3:	return .001;
+    case -2:	return .01;
+    case -1:	return .1;
+    case 0:	return 1.;
+    case 1:	return 10.;
+    case 2:	return 100.;
+    case 3:	return 1000.;
+    }
+
+  if (n < 0)
+    {
+      P = .0001;
+      for (n += 4; n < 0; n++)
+	P /= 10.;
+    }
+  else
+    {
+      P = 10000.;
+      for (n -= 4; n > 0; n--)
+	P *= 10.;
+    }
+
+  return P;
+}
+
+/*
+ * Find the integral part of the log in base 10 
+ * Note: this not a real log10()
+	 I just need and approximation(integerpart) of x in:
+	  10^x ~= r
+ * log_10(200) = 2;
+ * log_10(250) = 2;
+ *
+ * NOTE: do not call this with r == 0 -- an infinite loop results.
+ */
+static int
+log_10(r)
+     double r;
+{ 
+  int i = 0;
+  double result = 1.;
+
+  if (r < 0.)
+    r = -r;
+
+  if (r < 1.)
+    {
+      while (result >= r)
+	{
+	  result /= 10.;
+	  i++;
+	}
+      return (-i);
+    }
+  else
+    {
+      while (result <= r)
+	{
+	  result *= 10.;
+	  i++;
+	}
+      return (i - 1);
+    }
+}
+
+/*
+ * This function return the fraction part of a double
+ * and set in ip the integral part.
+ * In many ways it resemble the modf() found on most Un*x
+ */
+static double
+integral(real, ip)
+     double real;
+     double *ip;
+{ 
+  int j;
+  double i, s, p;
+  double real_integral = 0.;
+
+  /* take care of the obvious */
+  /* equal to zero ? */
+  if (real == 0.)
+    {
+      *ip = 0.;
+      return (0.);
+    }
+
+  /* negative number ? */
+  if (real < 0.)
+    real = -real;
+
+  /* a fraction ? */
+  if ( real < 1.)
+    {
+      *ip = 0.;
+      return real;
+    }
+
+  /* the real work :-) */
+  for (j = log_10(real); j >= 0; j--)
+    {
+      p = pow_10(j);
+      s = (real - real_integral)/p;
+      i = 0.;
+      while (i + 1. <= s)
+	i++;
+      real_integral += i*p;
+    }
+  *ip = real_integral;
+  return (real - real_integral);
+}
+
+#define PRECISION 1.e-6
+/* 
+ * return an ascii representation of the integral part of the number
+ * and set fract to be an ascii representation of the fraction part
+ * the container for the fraction and the integral part or statically
+ * declare with fix size 
+ */
+static char *
+numtoa(number, base, precision, fract)
+     double number;
+     int base, precision;
+     char **fract;
+{
+  register int i, j;
+  double ip, fp; /* integer and fraction part */
+  double fraction;
+  int digits, sign;
+  static char integral_part[MAX_INT];
+  static char fraction_part[MAX_FRACT];
+  int ch;
+
+  /* taking care of the obvious case: 0.0 */
+  if (number == 0.)
+    { 
+      integral_part[0] = '0';
+      integral_part[1] = '\0';
+      /* The fractional part has to take the precision into account */
+      for (ch = 0; ch < precision-1; ch++)
+ 	fraction_part[ch] = '0';
+      fraction_part[ch] = '0';
+      fraction_part[ch+1] = '\0';
+      if (fract)
+	*fract = fraction_part;
+      return integral_part;
+    }
+
+  /* -0 is tricky */
+  sign = (number == -0.) ? '-' : ((number < 0.) ? '-' : '+');
+  digits = MAX_INT - 1;
+
+  /* for negative numbers */
+  if (sign == '-')
+    {
+      number = -number;
+      digits--; /* sign consume one digit */
+    }
+
+  fraction = integral(number, &ip);
+  number = ip;
+
+  /* do the integral part */
+  if (ip == 0.)
+    {
+      integral_part[0] = '0';
+      i = 1;
+    }
+  else
+    {
+      for ( i = 0; i < digits && number != 0.; ++i)
+	{
+	  number /= base;
+	  fp = integral(number, &ip);
+	  ch = (int)((fp + PRECISION)*base); /* force to round */
+	  integral_part[i] = (ch <= 9) ? ch + '0' : ch + 'a' - 10;
+	  if (! ISXDIGIT((unsigned char)integral_part[i]))
+	    break;	/* bail out overflow !! */
+	  number = ip;
+	 }
+    }
+     
+  /* Oh No !! out of bound, ho well fill it up ! */
+  if (number != 0.)
+    for (i = 0; i < digits; ++i)
+      integral_part[i] = '9';
+
+  /* put the sign ? */
+  if (sign == '-')
+    integral_part[i++] = '-';
+
+  integral_part[i] = '\0';
+
+  /* reverse every thing */
+  for ( i--, j = 0; j < i; j++, i--)
+    SWAP_INT(integral_part[i], integral_part[j]);  
+
+  /* the fractional part */
+  for (i=0, fp=fraction; precision > 0 && i < MAX_FRACT ; i++, precision--)
+    {
+      fraction_part[i] = (int)((fp + PRECISION)*10. + '0');
+      if (! DIGIT(fraction_part[i])) /* underflow ? */
+	break;
+      fp = (fp*10.0) - (double)(long)((fp + PRECISION)*10.);
+    }
+  fraction_part[i] = '\0';
+
+  if (fract != (char **)0)
+    *fract = fraction_part;
+
+  return integral_part;
+}
+#endif
+
+/* for %d and friends, it puts in holder
+ * the representation with the right padding
+ */
+static void
+number(p, d, base)
+     struct DATA *p;
+     unsigned long d;
+     int base;
+{
+  char *tmp, *t;
+  long sd;
+  int flags;
+
+  /* An explicit precision turns off the zero-padding flag and sets the
+     pad character back to space. */
+  if ((p->flags & PF_ZEROPAD) && p->precision >= 0 && (p->flags & PF_DOT))
+    {
+      p->flags &= ~PF_ZEROPAD;
+      p->pad = ' ';
+    }
+
+  sd = d;	/* signed for ' ' padding in base 10 */
+  flags = 0;
+  flags = (*p->pf == 'x' || *p->pf == 'X' || *p->pf == 'o' || *p->pf == 'u' || *p->pf == 'U') ? FL_UNSIGNED : 0;
+  if (*p->pf == 'X')
+    flags |= FL_HEXUPPER;
+
+  tmp = fmtulong (d, base, intbuf, sizeof(intbuf), flags);
+  t = 0;
+  if ((p->flags & PF_THOUSANDS))
+    {
+      GETLOCALEDATA(decpoint, thoussep, grouping);
+      if (grouping && (t = groupnum (tmp)))
+	tmp = t;
+    }
+
+  /* need to add one for any `+', but we only add one in base 10 */
+  p->width -= strlen(tmp) + (base == 10 && d > 0 && (p->flags & PF_PLUS));
+  PAD_RIGHT(p);
+
+  if ((p->flags & PF_DOT) && p->precision > 0)
+    {
+      p->precision -= strlen(tmp);
+      PAD_ZERO(p);
+    }
+
+  switch (base)
+    {
+    case 10:
+      PUT_PLUS(sd, p, 0);
+      PUT_SPACE(sd, p, 0);
+      break;
+    case 8:
+      if (p->flags & PF_ALTFORM)
+	PUT_CHAR('0', p);
+      break;
+    case 16:
+      if (p->flags & PF_ALTFORM)
+	{
+	  PUT_CHAR('0', p);
+	  PUT_CHAR(*p->pf, p);
+	}
+      break;
+    }
+
+  while (*tmp)
+    {
+      PUT_CHAR(*tmp, p);
+      tmp++;
+    }
+
+  PAD_LEFT(p);
+  FREE (t);
+}
+
+#ifdef HAVE_LONG_LONG
+/*
+ * identical to number() but works for `long long'
+ */
+static void
+lnumber(p, d, base)
+     struct DATA *p;
+     unsigned long long d;
+     int base;
+{
+  char *tmp, *t;
+  long long sd;
+  int flags;
+
+  /* An explicit precision turns off the zero-padding flag and sets the
+     pad character back to space. */
+  if ((p->flags & PF_ZEROPAD) && p->precision >= 0 && (p->flags & PF_DOT))
+    {
+      p->flags &= ~PF_ZEROPAD;
+      p->pad = ' ';
+    }
+
+  sd = d;	/* signed for ' ' padding in base 10 */
+  flags = (*p->pf == 'x' || *p->pf == 'X' || *p->pf == 'o' || *p->pf == 'u' || *p->pf == 'U') ? FL_UNSIGNED : 0;
+  if (*p->pf == 'X')
+    flags |= FL_HEXUPPER;
+
+  tmp = fmtullong (d, base, intbuf, sizeof(intbuf), flags);
+  t = 0;
+  if ((p->flags & PF_THOUSANDS))
+    {
+      GETLOCALEDATA(decpoint, thoussep, grouping);
+      if (grouping && (t = groupnum (tmp)))
+	tmp = t;
+    }
+
+  /* need to add one for any `+', but we only add one in base 10 */
+  p->width -= strlen(tmp) + (base == 10 && d > 0 && (p->flags & PF_PLUS));
+  PAD_RIGHT(p);
+
+  if ((p->flags & PF_DOT) && p->precision > 0)
+    {
+      p->precision -= strlen(tmp);
+      PAD_ZERO(p);
+    }
+
+  switch (base)
+    {
+    case 10:
+      PUT_PLUS(sd, p, 0);
+      PUT_SPACE(sd, p, 0);
+      break;
+    case 8:
+      if (p->flags & PF_ALTFORM)
+	PUT_CHAR('0', p);
+      break;
+    case 16:
+      if (p->flags & PF_ALTFORM)
+	{
+	  PUT_CHAR('0', p);
+	  PUT_CHAR(*p->pf, p);
+	}
+      break;
+    }
+
+  while (*tmp)
+    {
+      PUT_CHAR(*tmp, p);
+      tmp++;
+    }
+
+  PAD_LEFT(p);
+  FREE (t);
+}
+#endif
+
+static void
+pointer(p, d)
+     struct DATA *p;
+     unsigned long d;
+{
+  char *tmp;
+
+  tmp = fmtulong(d, 16, intbuf, sizeof(intbuf), 0);
+  p->width -= strlen(tmp);
+  PAD_RIGHT(p);
+
+  /* prefix '0x' for pointers */
+  PUT_CHAR('0', p);
+  PUT_CHAR('x', p);
+
+  while (*tmp)
+    {
+      PUT_CHAR(*tmp, p);
+      tmp++;
+    }
+
+  PAD_LEFT(p);
+}
+
+/* %s strings */
+static void
+strings(p, tmp)
+     struct DATA *p;
+     char *tmp;
+{
+  size_t len;
+
+  len = strlen(tmp);
+  if (p->precision != NOT_FOUND) /* the smallest number */
+    len = (len < p->precision ? len : p->precision);
+  p->width -= len;
+
+  PUT_STRING (tmp, len, p);
+}
+
+#if HANDLE_MULTIBYTE
+/* %ls wide-character strings */
+static void
+wstrings(p, tmp)
+     struct DATA *p;
+     wchar_t *tmp;
+{
+  size_t len;
+  mbstate_t mbs;
+  char *os;
+  const wchar_t *ws;
+
+  memset (&mbs, '\0', sizeof (mbstate_t));
+  ws = (const wchar_t *)tmp;
+
+  os = (char *)NULL;
+  if (p->precision != NOT_FOUND)
+    {
+      os = (char *)xmalloc (p->precision + 1);
+      len = wcsrtombs (os, &ws, p->precision, &mbs);
+    }
+  else
+    {
+      len = wcsrtombs (NULL, &ws, 0, &mbs);
+      if (len != (size_t)-1)
+	{
+	  memset (&mbs, '\0', sizeof (mbstate_t));
+	  os = (char *)xmalloc (len + 1);
+	  (void)wcsrtombs (os, &ws, len + 1, &mbs);
+	}
+    }
+  if (len == (size_t)-1)
+    {
+      /* invalid multibyte sequence; bail now. */
+      FREE (os);      
+      return;
+    }
+
+  p->width -= len;
+  PUT_STRING (os, len, p);
+  free (os);
+}
+
+static void
+wchars (p, wc)
+     struct DATA *p;
+     wint_t wc;
+{
+  char *lbuf, *l;
+  mbstate_t mbs;
+  size_t len;
+
+  lbuf = (char *)malloc (MB_CUR_MAX+1);
+  if (lbuf == 0)
+    return;
+  memset (&mbs, '\0', sizeof (mbstate_t));
+  len = wcrtomb (lbuf, wc, &mbs);
+  if (len == (size_t)-1)
+    /* conversion failed; bail now. */
+    return;
+  p->width -= len;
+  l = lbuf;
+  PUT_STRING (l, len, p);
+  free (lbuf);
+}
+#endif /* HANDLE_MULTIBYTE */
+
+#ifdef FLOATING_POINT
+
+/* Check for [+-]infinity and NaN.  If MODE == 1, we check for Infinity, else
+   (mode == 2) we check for NaN.  This does the necessary printing.  Returns
+   1 if Inf or Nan, 0 if not. */
+static int
+chkinfnan(p, d, mode)
+     struct DATA *p;
+     double d;
+     int mode;		/* == 1 for inf, == 2 for nan */
+{
+  int i;
+  char *tmp;
+  char *big, *small;
+
+  i = (mode == 1) ? isinf(d) : isnan(d);
+  if (i == 0)
+    return 0;
+  big = (mode == 1) ? "INF" : "NAN";
+  small = (mode == 1) ? "inf" : "nan";
+
+  tmp = (*p->pf == 'F' || *p->pf == 'G' || *p->pf == 'E') ? big : small;
+
+  if (i < 0)
+    PUT_CHAR('-', p);
+
+  while (*tmp)
+    {
+      PUT_CHAR (*tmp, p);
+      tmp++;
+    }
+
+  return 1;
+}
+
+/* %f %F %g %G floating point representation */
+static void
+floating(p, d)
+     struct DATA *p;
+     double d;
+{
+  char *tmp, *tmp2, *t;
+  int i;
+
+  if (d != 0 && (chkinfnan(p, d, 1) || chkinfnan(p, d, 2)))
+    return;	/* already printed nan or inf */
+
+  GETLOCALEDATA(decpoint, thoussep, grouping);
+  DEF_PREC(p);
+  d = ROUND(d, p);
+  tmp = dtoa(d, p->precision, &tmp2);
+  t = 0;
+  if ((p->flags & PF_THOUSANDS) && grouping && (t = groupnum (tmp)))
+    tmp = t;
+
+  if ((*p->pf == 'g' || *p->pf == 'G') && (p->flags & PF_ALTFORM) == 0)
+    {
+      /* smash the trailing zeros unless altform */
+      for (i = strlen(tmp2) - 1; i >= 0 && tmp2[i] == '0'; i--)
+	tmp2[i] = '\0'; 
+      if (tmp2[0] == '\0')
+	p->precision = 0;
+    }
+
+  /* calculate the padding. 1 for the dot */
+  p->width = p->width -
+  	    /* XXX - should this be d>0. && (p->flags & PF_PLUS) ? */
+#if 0
+	    ((d > 0. && p->justify == RIGHT) ? 1:0) -
+#else
+	    ((d > 0. && (p->flags & PF_PLUS)) ? 1:0) -
+#endif
+	    ((p->flags & PF_SPACE) ? 1:0) -
+	    strlen(tmp) - p->precision -
+	    ((p->precision != 0 || (p->flags & PF_ALTFORM)) ? 1 : 0);	/* radix char */
+
+  if (p->pad == ' ')
+    {
+      PAD_RIGHT(p);
+      PUT_PLUS(d, p, 0.);
+    }
+  else
+    {
+      if (*tmp == '-')
+	PUT_CHAR(*tmp++, p);
+      PUT_PLUS(d, p, 0.);
+      PAD_RIGHT(p);
+    }
+  PUT_SPACE(d, p, 0.);
+
+  while (*tmp)
+    {
+      PUT_CHAR(*tmp, p);	/* the integral */
+      tmp++;
+    }
+  FREE (t);
+
+  if (p->precision != 0 || (p->flags & PF_ALTFORM))
+    PUT_CHAR(decpoint, p);  /* put the '.' */
+
+  for (; *tmp2; tmp2++)
+    PUT_CHAR(*tmp2, p); /* the fraction */
+  
+  PAD_LEFT(p);
+} 
+
+/* %e %E %g %G exponent representation */
+static void
+exponent(p, d)
+     struct DATA *p;
+     double d;
+{
+  char *tmp, *tmp2;
+  int j, i;
+
+  if (d != 0 && (chkinfnan(p, d, 1) || chkinfnan(p, d, 2)))
+    return;	/* already printed nan or inf */
+
+  GETLOCALEDATA(decpoint, thoussep, grouping);
+  DEF_PREC(p);
+  if (d == 0.)
+    j = 0;
+  else
+    {
+      j = log_10(d);
+      d = d / pow_10(j);  /* get the Mantissa */
+      d = ROUND(d, p);		  
+    }
+  tmp = dtoa(d, p->precision, &tmp2);
+
+  /* 1 for unit, 1 for the '.', 1 for 'e|E',
+   * 1 for '+|-', 2 for 'exp'  (but no `.' if precision == 0 */
+  /* calculate how much padding need */
+  p->width = p->width - 
+  	    /* XXX - should this be d>0. && (p->flags & PF_PLUS) ? */
+#if 0
+	     ((d > 0. && p->justify == RIGHT) ? 1:0) -
+#else
+	     ((d > 0. && (p->flags & PF_PLUS)) ? 1:0) -
+#endif
+	     (p->precision != 0 || (p->flags & PF_ALTFORM)) -
+	     ((p->flags & PF_SPACE) ? 1:0) - p->precision - 5;
+
+  if (p->pad == ' ')
+    {
+      PAD_RIGHT(p);
+      PUT_PLUS(d, p, 0.);
+    }
+  else
+    {
+      if (*tmp == '-')
+	PUT_CHAR(*tmp++, p);
+      PUT_PLUS(d, p, 0.);
+      PAD_RIGHT(p);
+    }
+  PUT_SPACE(d, p, 0.);
+
+  while (*tmp)
+    {
+      PUT_CHAR(*tmp, p);
+      tmp++;
+    }
+
+  if (p->precision != 0 || (p->flags & PF_ALTFORM))
+      PUT_CHAR(decpoint, p);  /* the '.' */
+
+  if ((*p->pf == 'g' || *p->pf == 'G') && (p->flags & PF_ALTFORM) == 0)
+    /* smash the trailing zeros unless altform */
+    for (i = strlen(tmp2) - 1; i >= 0 && tmp2[i] == '0'; i--)
+      tmp2[i] = '\0'; 
+
+  for (; *tmp2; tmp2++)
+    PUT_CHAR(*tmp2, p); /* the fraction */
+
+  /* the exponent put the 'e|E' */
+  if (*p->pf == 'g' || *p->pf == 'e')
+    PUT_CHAR('e', p);
+  else
+    PUT_CHAR('E', p);
+
+  /* the sign of the exp */
+  if (j >= 0)
+    PUT_CHAR('+', p);
+  else
+    {
+      PUT_CHAR('-', p);
+      j = -j;
+    }
+
+   tmp = itoa(j);
+   /* pad out to at least two spaces.  pad with `0' if the exponent is a
+      single digit. */
+   if (j <= 9)
+     PUT_CHAR('0', p);
+
+   /* the exponent */
+   while (*tmp)
+     {
+       PUT_CHAR(*tmp, p);
+       tmp++;
+     }
+
+   PAD_LEFT(p);
+}
+#endif
+
+/* Return a new string with the digits in S grouped according to the locale's
+   grouping info and thousands separator.  If no grouping should be performed,
+   this returns NULL; the caller needs to check for it. */
+static char *
+groupnum (s)
+     char *s;
+{
+  char *se, *ret, *re, *g;
+  int len, slen;
+
+  if (grouping == 0 || *grouping <= 0 || *grouping == CHAR_MAX)
+    return ((char *)NULL);
+
+  /* find min grouping to size returned string */
+  for (len = *grouping, g = grouping; *g; g++)
+      if (*g > 0 && *g < len)
+	len = *g;
+
+  slen = strlen (s);
+  len = slen / len + 1;
+  ret = (char *)xmalloc (slen + len + 1);
+  re = ret + slen + len;
+  *re = '\0';
+
+  g = grouping;
+  se = s + slen;
+  len = *g;
+
+  while (se > s)
+    {
+      *--re = *--se;
+
+      /* handle `-' inserted by numtoa() and the fmtu* family here. */
+      if (se > s && se[-1] == '-')
+	continue;
+
+      /* begin new group. */
+      if (--len == 0 && se > s)
+	{
+	  *--re = thoussep;
+	  len = *++g;		/* was g++, but that uses first char twice (glibc bug, too) */
+	  if (*g == '\0')
+	    len = *--g;		/* use previous grouping */
+	  else if (*g == CHAR_MAX)
+	    {
+	      do
+		*--re = *--se;
+	      while (se > s);
+	      break;
+	    }
+	}
+    }
+
+  if (re > ret)
+#ifdef HAVE_MEMMOVE
+    memmove (ret, re, strlen (re) + 1);
+#else
+    strcpy (ret, re);
+#endif
+   
+  return ret;
+}
+
+/* initialize the conversion specifiers */
+static void
+init_conv_flag (p)
+     struct DATA *p;
+{
+  p->flags &= PF_ALLOCBUF;		/* preserve PF_ALLOCBUF flag */
+  p->precision = p->width = NOT_FOUND;
+  p->justify = NOT_FOUND;
+  p->pad = ' ';
+}
+
+static void
+init_data (p, string, length, format, mode)
+     struct DATA *p;
+     char *string;
+     size_t length;
+     const char *format;
+     int mode;
+{
+  p->length = length - 1; /* leave room for '\0' */
+  p->holder = p->base = string;
+  p->pf = format;
+  p->counter = 0;
+  p->flags = (mode == PFM_AS) ? PF_ALLOCBUF : 0;
+}
+
+static int
+#if defined (__STDC__)
+vsnprintf_internal(struct DATA *data, char *string, size_t length, const char *format, va_list args)
+#else
+vsnprintf_internal(data, string, length, format, args)
+     struct DATA *data;
+     char *string;
+     size_t length;
+     const char *format;
+     va_list args;
+#endif
+{
+  double d; /* temporary holder */
+#ifdef HAVE_LONG_DOUBLE
+  long double ld;	/* for later */
+#endif
+  unsigned long ul;
+#ifdef HAVE_LONG_LONG
+  unsigned long long ull;
+#endif
+  int state, i, c, n;
+  char *s;
+#if HANDLE_MULTIBYTE
+  wchar_t *ws;
+  wint_t wc;
+#endif
+  const char *convstart;
+  int negprec;
+
+  /* Sanity check, the string length must be >= 0.  C99 actually says that
+     LENGTH can be zero here, in the case of snprintf/vsnprintf (it's never
+     0 in the case of asprintf/vasprintf), and the return value is the number
+     of characters that would have been written. */
+  if (length < 0)
+    return -1;
+
+  if (format == 0)
+    return 0;
+
+  /* Reset these for each call because the locale might have changed. */
+  decpoint = thoussep = 0;
+  grouping = 0;
+
+  negprec = 0;
+  for (; c = *(data->pf); data->pf++)
+    {
+      if (c != '%')
+	{
+	  PUT_CHAR (c, data);
+	  continue;
+	}
+
+      convstart = data->pf;
+      init_conv_flag (data); /* initialise format flags */
+
+      state = 1;
+      for (state = 1; state && *data->pf; )
+	{
+	  c = *(++data->pf);
+	      /* fmtend = data->pf */
+#if defined (FLOATING_POINT) && defined (HAVE_LONG_DOUBLE)
+	  if (data->flags & PF_LONGDBL)
+	    {
+	      switch (c)
+		{
+		case 'f': case 'F':
+		case 'e': case 'E':
+		case 'g': case 'G':
+#  ifdef HAVE_PRINTF_A_FORMAT
+		case 'a': case 'A':
+#  endif
+		  STAR_ARGS (data);
+		  ld = GETLDOUBLE (data);
+		  ldfallback (data, convstart, data->pf, ld);
+		  goto conv_break;
+		}
+	    }
+#endif /* FLOATING_POINT && HAVE_LONG_DOUBLE */
+
+	  switch (c)
+	    {
+	      /* Parse format flags */
+	      case '\0': /* a NULL here ? ? bail out */
+		*data->holder = '\0';
+		return data->counter;
+		break;
+	      case '#':
+		data->flags |= PF_ALTFORM;
+		continue;
+	      case '*':
+		if (data->flags & PF_DOT)
+		  data->flags |= PF_STAR_P;
+		else
+		  data->flags |= PF_STAR_W;
+		continue;
+	      case '-':
+		if ((data->flags & PF_DOT) == 0)
+		  {
+		    data->flags |= PF_LADJUST;
+		    data->justify = LEFT;
+		  }
+		else
+		  negprec = 1;
+		continue;
+	      case ' ':
+		if ((data->flags & PF_PLUS) == 0)
+		  data->flags |= PF_SPACE;
+		continue;
+	      case '+':
+		if ((data->flags & PF_DOT) == 0)
+		  {
+		    data->flags |= PF_PLUS;
+		    if ((data->flags & PF_LADJUST) == 0)
+		      data->justify = RIGHT;
+		  }
+		continue;
+	      case '\'':
+		data->flags |= PF_THOUSANDS;
+		continue;
+
+	      case '0':
+		/* If we're not specifying precision (in which case we've seen
+		   a `.') and we're not performing left-adjustment (in which
+		   case the `0' is ignored), a `0' is taken as the zero-padding
+		   flag. */
+	        if ((data->flags & (PF_DOT|PF_LADJUST)) == 0)
+		  {
+		    data->flags |= PF_ZEROPAD;
+		    data->pad = '0';
+		    continue;
+		  }
+	      case '1': case '2': case '3':
+	      case '4': case '5': case '6':
+	      case '7': case '8': case '9':
+		n = 0;
+		do
+		  {
+		    n = n * 10 + TODIGIT(c);
+		    c = *(++data->pf);
+		  }
+		while (DIGIT(c));
+		data->pf--;		/* went too far */
+		if (n < 0)
+		  n = 0;
+		if (data->flags & PF_DOT)
+		  data->precision = negprec ? NOT_FOUND : n;
+		else
+		  data->width = n;
+		continue;
+
+	      /* optional precision */
+	      case '.':
+		data->flags |= PF_DOT;
+		data->precision = 0;
+		continue;
+
+	      /* length modifiers */
+	      case 'h':
+		data->flags |= (data->flags & PF_SHORTINT) ? PF_SIGNEDCHAR : PF_SHORTINT;
+		continue;
+	      case 'l':
+		data->flags |= (data->flags & PF_LONGINT) ? PF_LONGLONG : PF_LONGINT;
+		continue;
+	      case 'L':
+		data->flags |= PF_LONGDBL;
+		continue;
+	      case 'q':
+		data->flags |= PF_LONGLONG;
+		continue;
+	      case 'j':
+		data->flags |= PF_INTMAX_T;
+		SET_SIZE_FLAGS(data, intmax_t);
+		continue;
+	      case 'z':
+		data->flags |= PF_SIZE_T;
+		SET_SIZE_FLAGS(data, size_t);
+		continue;
+	      case 't':
+		data->flags |= PF_PTRDIFF_T;
+		SET_SIZE_FLAGS(data, ptrdiff_t);
+		continue;
+		
+	      /* Conversion specifiers */
+#ifdef FLOATING_POINT
+	      case 'f':  /* float, double */
+	      case 'F':
+		STAR_ARGS(data);
+		d = GETDOUBLE(data);
+		floating(data, d);
+conv_break:		
+		state = 0;
+		break;
+	      case 'g': 
+	      case 'G':
+		STAR_ARGS(data);
+		DEF_PREC(data);
+		d = GETDOUBLE(data);
+		i = (d != 0.) ? log_10(d) : -1;
+		/*
+		 * for '%g|%G' ANSI: use f if exponent
+		 * is in the range or [-4,p] exclusively
+		 * else use %e|%E
+		 */
+		if (-4 < i && i < data->precision)
+		  {
+		    /* reset precision */
+		    data->precision -= i + 1;
+		    floating(data, d);
+		  }
+		else
+		  {
+		    /* reduce precision by 1 because of leading digit before
+		       decimal point in e format, unless specified as 0. */
+		    if (data->precision > 0)
+		      data->precision--;
+		    exponent(data, d);
+		  }
+		state = 0;
+		break;
+	      case 'e':
+	      case 'E':  /* Exponent double */
+		STAR_ARGS(data);
+		d = GETDOUBLE(data);
+		exponent(data, d);
+		state = 0;
+		break;
+#  ifdef HAVE_PRINTF_A_FORMAT
+	      case 'a':
+	      case 'A':
+		STAR_ARGS(data);
+		d = GETDOUBLE(data);
+		dfallback(data, convstart, data->pf, d);
+		state = 0;
+		break;
+#  endif /* HAVE_PRINTF_A_FORMAT */
+#endif /* FLOATING_POINT */
+	      case 'U':
+		data->flags |= PF_LONGINT;
+		/* FALLTHROUGH */
+	      case 'u':
+		STAR_ARGS(data);
+#ifdef HAVE_LONG_LONG
+		if (data->flags & PF_LONGLONG)
+		  {
+		    ull = GETARG (unsigned long long);
+		    lnumber(data, ull, 10);
+		  }
+		else
+#endif
+		  {
+		    ul = GETUNSIGNED(data);
+		    number(data, ul, 10);
+		  }
+		state = 0;
+		break;
+	      case 'D':
+		data->flags |= PF_LONGINT;
+		/* FALLTHROUGH */
+	      case 'd':  /* decimal */
+	      case 'i':
+		STAR_ARGS(data);
+#ifdef HAVE_LONG_LONG
+		if (data->flags & PF_LONGLONG)
+		  {
+		    ull = GETARG (long long);
+		    lnumber(data, ull, 10);
+		  }
+		else
+#endif
+		  {
+		    ul = GETSIGNED(data);
+		    number(data, ul, 10);
+		  }
+		state = 0;
+		break;
+	      case 'o':  /* octal */
+		STAR_ARGS(data);
+#ifdef HAVE_LONG_LONG
+		if (data->flags & PF_LONGLONG)
+		  {
+		    ull = GETARG (unsigned long long);
+		    lnumber(data, ull, 8);
+		  }
+		else
+#endif
+		  {
+		    ul = GETUNSIGNED(data);
+		    number(data, ul, 8);
+		  }
+		state = 0;
+		break;
+	      case 'x': 
+	      case 'X':  /* hexadecimal */
+		STAR_ARGS(data);
+#ifdef HAVE_LONG_LONG
+		if (data->flags & PF_LONGLONG)
+		  {
+		    ull = GETARG (unsigned long long);
+		    lnumber(data, ull, 16);
+		  }
+		else
+#endif
+		  {
+		    ul = GETUNSIGNED(data);
+		    number(data, ul, 16);
+		  }
+		state = 0;
+		break;
+	      case 'p':
+		STAR_ARGS(data);
+		ul = (unsigned long)GETARG (void *);
+		pointer(data, ul);
+		state = 0;
+		break;
+#if HANDLE_MULTIBYTE
+	      case 'C':
+		data->flags |= PF_LONGINT;
+		/* FALLTHROUGH */
+#endif
+	      case 'c': /* character */
+		STAR_ARGS(data);
+#if HANDLE_MULTIBYTE
+		if (data->flags & PF_LONGINT)
+		  {
+		    wc = GETARG (wint_t);
+		    wchars (data, wc);
+		  }
+		else
+#endif
+		  {		
+		    ul = GETARG (int);
+		    PUT_CHAR(ul, data);
+		  }
+		state = 0;
+		break;
+#if HANDLE_MULTIBYTE
+	      case 'S':
+		data->flags |= PF_LONGINT;
+		/* FALLTHROUGH */
+#endif
+	      case 's':  /* string */
+		STAR_ARGS(data);
+#if HANDLE_MULTIBYTE
+		if (data->flags & PF_LONGINT)
+		  {
+		    ws = GETARG (wchar_t *);
+		    wstrings (data, ws);
+		  }
+		else
+#endif
+		  {
+		    s = GETARG (char *);
+		    strings(data, s);
+		  }
+		state = 0;
+		break;
+	      case 'n':
+#ifdef HAVE_LONG_LONG
+		if (data->flags & PF_LONGLONG)
+		  *(GETARG (long long *)) = data->counter;
+		else
+#endif
+		if (data->flags & PF_LONGINT)
+		  *(GETARG (long *)) = data->counter;
+		else if (data->flags & PF_SHORTINT)
+		  *(GETARG (short *)) = data->counter;
+		else
+		  *(GETARG (int *)) = data->counter;
+		state = 0;
+		break;
+	      case '%':  /* nothing just % */
+		PUT_CHAR('%', data);
+		state = 0;
+		break;
+  	      default:
+		/* is this an error ? maybe bail out */
+		state = 0;
+		break;
+	} /* end switch */
+      } /* end of `%' for loop */
+    } /* end of format string for loop */
+
+  if (data->length >= 0)
+    *data->holder = '\0'; /* the end ye ! */
+
+  return data->counter;
+}
+
+#if defined (FLOATING_POINT) && defined (HAVE_LONG_DOUBLE)
+/*
+ * Printing floating point numbers accurately is an art.  I'm not good
+ * at it.  Fall back to sprintf for long double formats.
+ */
+static void
+ldfallback (data, fs, fe, ld)
+     struct DATA *data;
+     const char *fs, *fe;
+     long double ld;
+{
+  register char *x;
+  char fmtbuf[FALLBACK_FMTSIZE], *obuf;
+  int fl;
+
+  fl = LFALLBACK_BASE + (data->precision < 6 ? 6 : data->precision) + 2;
+  obuf = (char *)xmalloc (fl);
+  fl = fe - fs + 1;
+  strncpy (fmtbuf, fs, fl);
+  fmtbuf[fl] = '\0';
+
+  if ((data->flags & PF_STAR_W) && (data->flags & PF_STAR_P))
+    sprintf (obuf, fmtbuf, data->width, data->precision, ld);
+  else if (data->flags & PF_STAR_W)
+    sprintf (obuf, fmtbuf, data->width, ld);
+  else if (data->flags & PF_STAR_P)
+    sprintf (obuf, fmtbuf, data->precision, ld);
+  else
+    sprintf (obuf, fmtbuf, ld);
+
+  for (x = obuf; *x; x++)
+    PUT_CHAR (*x, data);    
+  xfree (obuf);
+}
+#endif /* FLOATING_POINT && HAVE_LONG_DOUBLE */
+
+#ifdef FLOATING_POINT
+/* Used for %a, %A if the libc printf supports them. */
+static void
+dfallback (data, fs, fe, d)
+     struct DATA *data;
+     const char *fs, *fe;
+     double d;
+{
+  register char *x;
+  char fmtbuf[FALLBACK_FMTSIZE], obuf[FALLBACK_BASE];
+  int fl;
+
+  fl = fe - fs + 1;
+  strncpy (fmtbuf, fs, fl);
+  fmtbuf[fl] = '\0';
+
+  if ((data->flags & PF_STAR_W) && (data->flags & PF_STAR_P))
+    sprintf (obuf, fmtbuf, data->width, data->precision, d);
+  else if (data->flags & PF_STAR_W)
+    sprintf (obuf, fmtbuf, data->width, d);
+  else if (data->flags & PF_STAR_P)
+    sprintf (obuf, fmtbuf, data->precision, d);
+  else
+    sprintf (obuf, fmtbuf, d);
+
+  for (x = obuf; *x; x++)
+    PUT_CHAR (*x, data);    
+}
+#endif /* FLOATING_POINT */
+
+#if !HAVE_SNPRINTF
+
+int
+#if defined (__STDC__)
+vsnprintf(char *string, size_t length, const char *format, va_list args)
+#else
+vsnprintf(string, length, format, args)
+     char *string;
+     size_t length;
+     const char *format;
+     va_list args;
+#endif
+{
+  struct DATA data;
+
+  if (string == 0 && length != 0)
+    return 0;
+  init_data (&data, string, length, format, PFM_SN);
+  return (vsnprintf_internal(&data, string, length, format, args));
+}
+
+int
+#if defined(PREFER_STDARG)
+snprintf(char *string, size_t length, const char * format, ...)
+#else
+snprintf(string, length, format, va_alist)
+     char *string;
+     size_t length;
+     const char *format;
+     va_dcl
+#endif
+{
+  struct DATA data;
+  int rval;
+  va_list args;
+
+  SH_VA_START(args, format);
+
+  if (string == 0 && length != 0)
+    return 0;
+  init_data (&data, string, length, format, PFM_SN);
+  rval = vsnprintf_internal (&data, string, length, format, args);
+
+  va_end(args);
+
+  return rval;
+}
+
+#endif /* HAVE_SNPRINTF */
+
+#if !HAVE_ASPRINTF
+
+int
+#if defined (__STDC__)
+vasprintf(char **stringp, const char *format, va_list args)
+#else
+vasprintf(stringp, format, args)
+     char **stringp;
+     const char *format;
+     va_list args;
+#endif
+{
+  struct DATA data;
+  char *string;
+  int r;
+
+  string = (char *)xmalloc(ASBUFSIZE);
+  init_data (&data, string, ASBUFSIZE, format, PFM_AS);
+  r = vsnprintf_internal(&data, string, ASBUFSIZE, format, args);
+  *stringp = data.base;		/* not string in case reallocated */
+  return r;
+}
+
+int
+#if defined(PREFER_STDARG)
+asprintf(char **stringp, const char * format, ...)
+#else
+asprintf(stringp, format, va_alist)
+     char **stringp;
+     const char *format;
+     va_dcl
+#endif
+{
+  int rval;
+  va_list args;
+
+  SH_VA_START(args, format);
+
+  rval = vasprintf (stringp, format, args);
+
+  va_end(args);
+
+  return rval;
+}
+
+#endif /* !HAVE_ASPRINTF */
+
+#endif /* !HAVE_SNPRINTF || !HAVE_ASPRINTF */
+
+#ifdef DRIVER
+
+static void
+memory_error_and_abort ()
+{
+  write (2, "out of virtual memory\n", 22);
+  abort ();
+}
+
+static void *
+xmalloc(bytes)
+     size_t bytes;
+{
+  void *ret;
+
+  ret = malloc(bytes);
+  if (ret == 0)
+    memory_error_and_abort ();
+  return ret;
+}
+
+static void *
+xrealloc (pointer, bytes)
+     void *pointer;
+     size_t bytes;
+{
+  void *ret;
+
+  ret = pointer ? realloc(pointer, bytes) : malloc(bytes);
+  if (ret == 0)
+    memory_error_and_abort ();
+  return ret;
+}
+
+static void
+xfree(x)
+     void *x;
+{
+  if (x)
+    free (x);
+}
+
+/* set of small tests for snprintf() */
+main()
+{
+  char holder[100];
+  char *h;
+  int i, si, ai;
+
+#ifdef HAVE_LOCALE_H
+  setlocale(LC_ALL, "");
+#endif
+
+#if 1
+  si = snprintf((char *)NULL, 0, "abcde\n");
+  printf("snprintf returns %d with NULL first argument and size of 0\n", si);
+  si = snprintf(holder, 0, "abcde\n");
+  printf("snprintf returns %d with non-NULL first argument and size of 0\n", si);
+  si = snprintf((char *)NULL, 16, "abcde\n");
+  printf("snprintf returns %d with NULL first argument and non-zero size\n", si);
+  
+/*
+  printf("Suite of test for snprintf:\n");
+  printf("a_format\n");
+  printf("printf() format\n");
+  printf("snprintf() format\n\n");
+*/
+/* Checking the field widths */
+
+  printf("/%%ld %%ld/, 336, 336\n");
+  snprintf(holder, sizeof holder, "/%ld %ld/\n", 336, 336);
+  asprintf(&h, "/%ld %ld/\n", 336, 336);
+  printf("/%ld %ld/\n", 336, 336);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("/%%d/, 336\n");
+  snprintf(holder, sizeof holder, "/%d/\n", 336);
+  asprintf(&h, "/%d/\n", 336);
+  printf("/%d/\n", 336);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("/%%2d/, 336\n");
+  snprintf(holder, sizeof holder, "/%2d/\n", 336);
+  asprintf(&h, "/%2d/\n", 336);
+  printf("/%2d/\n", 336);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("/%%10d/, 336\n");
+  snprintf(holder, sizeof holder, "/%10d/\n", 336);
+  asprintf(&h, "/%10d/\n", 336);
+  printf("/%10d/\n", 336);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("/%%-10d/, 336\n");
+  snprintf(holder, sizeof holder, "/%-10d/\n", 336);
+  asprintf(&h, "/%-10d/\n", 336);
+  printf("/%-10d/\n", 336);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+
+/* floating points */
+
+  printf("/%%f/, 1234.56\n");
+  snprintf(holder, sizeof holder, "/%f/\n", 1234.56);
+  asprintf(&h, "/%f/\n", 1234.56);
+  printf("/%f/\n", 1234.56);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("/%%e/, 1234.56\n");
+  snprintf(holder, sizeof holder, "/%e/\n", 1234.56);
+  asprintf(&h, "/%e/\n", 1234.56);
+  printf("/%e/\n", 1234.56);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("/%%4.2f/, 1234.56\n");
+  snprintf(holder, sizeof holder, "/%4.2f/\n", 1234.56);
+  asprintf(&h, "/%4.2f/\n", 1234.56);
+  printf("/%4.2f/\n", 1234.56);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("/%%3.1f/, 1234.56\n");
+  snprintf(holder, sizeof holder, "/%3.1f/\n", 1234.56);
+  asprintf(&h, "/%3.1f/\n", 1234.56);
+  printf("/%3.1f/\n", 1234.56);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("/%%10.3f/, 1234.56\n");
+  snprintf(holder, sizeof holder, "/%10.3f/\n", 1234.56);
+  asprintf(&h, "/%10.3f/\n", 1234.56);
+  printf("/%10.3f/\n", 1234.56);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("/%%10.3e/, 1234.56\n");
+  snprintf(holder, sizeof holder, "/%10.3e/\n", 1234.56);
+  asprintf(&h, "/%10.3e/\n", 1234.56);
+  printf("/%10.3e/\n", 1234.56);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("/%%+4.2f/, 1234.56\n");
+  snprintf(holder, sizeof holder, "/%+4.2f/\n", 1234.56);
+  asprintf(&h, "/%+4.2f/\n", 1234.56);
+  printf("/%+4.2f/\n", 1234.56);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("/%%010.2f/, 1234.56\n");
+  snprintf(holder, sizeof holder, "/%010.2f/\n", 1234.56);
+  asprintf(&h, "/%010.2f/\n", 1234.56);
+  printf("/%010.2f/\n", 1234.56);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+#define BLURB "Outstanding acting !"
+/* strings precisions */
+
+  printf("/%%2s/, \"%s\"\n", BLURB);
+  snprintf(holder, sizeof holder, "/%2s/\n", BLURB);
+  asprintf(&h, "/%2s/\n", BLURB);
+  printf("/%2s/\n", BLURB);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("/%%22s/ %s\n", BLURB);
+  snprintf(holder, sizeof holder, "/%22s/\n", BLURB);
+  asprintf(&h, "/%22s/\n", BLURB);
+  printf("/%22s/\n", BLURB);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("/%%22.5s/ %s\n", BLURB);
+  snprintf(holder, sizeof holder, "/%22.5s/\n", BLURB);
+  asprintf(&h, "/%22.5s/\n", BLURB);
+  printf("/%22.5s/\n", BLURB);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("/%%-22.5s/ %s\n", BLURB);
+  snprintf(holder, sizeof holder, "/%-22.5s/\n", BLURB);
+  asprintf(&h, "/%-22.5s/\n", BLURB);
+  printf("/%-22.5s/\n", BLURB);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+/* see some flags */
+
+  printf("%%x %%X %%#x, 31, 31, 31\n");
+  snprintf(holder, sizeof holder, "%x %X %#x\n", 31, 31, 31);
+  asprintf(&h, "%x %X %#x\n", 31, 31, 31);
+  printf("%x %X %#x\n", 31, 31, 31);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("**%%d**%% d**%% d**, 42, 42, -42\n");
+  snprintf(holder, sizeof holder, "**%d**% d**% d**\n", 42, 42, -42);
+  asprintf(&h, "**%d**% d**% d**\n", 42, 42, -42);
+  printf("**%d**% d**% d**\n", 42, 42, -42);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+/* other flags */
+
+  printf("/%%g/, 31.4\n");
+  snprintf(holder, sizeof holder, "/%g/\n", 31.4);
+  asprintf(&h, "/%g/\n", 31.4);
+  printf("/%g/\n", 31.4);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("/%%.6g/, 31.4\n");
+  snprintf(holder, sizeof holder, "/%.6g/\n", 31.4);
+  asprintf(&h, "/%.6g/\n", 31.4);
+  printf("/%.6g/\n", 31.4);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("/%%.1G/, 31.4\n");
+  snprintf(holder, sizeof holder, "/%.1G/\n", 31.4);
+  asprintf(&h, "/%.1G/\n", 31.4);
+  printf("/%.1G/\n", 31.4);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("/%%.1G/, 3100000000.4\n");
+  snprintf(holder, sizeof holder, "/%.1G/\n", 3100000000.4);  
+  asprintf(&h, "/%.1G/\n", 3100000000.4);  
+  printf("/%.1G/\n", 3100000000.4); 
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("abc%%n\n");
+  printf("abc%n", &i); printf("%d\n", i);
+  snprintf(holder, sizeof holder, "abc%n", &i);
+  printf("%s", holder); printf("%d\n\n", i);
+  asprintf(&h, "abc%n", &i);
+  printf("%s", h); printf("%d\n\n", i);
+  
+  printf("%%*.*s --> 10.10\n");
+  snprintf(holder, sizeof holder, "%*.*s\n", 10, 10, BLURB);
+  asprintf(&h, "%*.*s\n", 10, 10, BLURB);
+  printf("%*.*s\n", 10, 10, BLURB);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("%%%%%%%%\n");
+  snprintf(holder, sizeof holder, "%%%%\n");
+  asprintf(&h, "%%%%\n");
+  printf("%%%%\n");
+  printf("%s", holder);
+  printf("%s\n", h);
+
+#define BIG "Hello this is a too big string for the buffer"
+/*  printf("A buffer to small of 10, trying to put this:\n");*/
+  printf("<%%>, %s\n", BIG); 
+  i = snprintf(holder, 10, "%s\n", BIG);
+  i = asprintf(&h, "%s", BIG);
+  printf("<%s>\n", BIG);
+  printf("<%s>\n", holder);
+  printf("<%s>\n\n", h);
+
+  printf ("<%%p> vsnprintf\n");
+  i = snprintf(holder, 100, "%p", vsnprintf);
+  i = asprintf(&h, "%p", vsnprintf);
+  printf("<%p>\n", vsnprintf);
+  printf("<%s>\n", holder);  
+  printf("<%s>\n\n", h);
+
+  printf ("<%%lu> LONG_MAX+1\n");
+  i = snprintf(holder, 100, "%lu", (unsigned long)(LONG_MAX)+1);
+  i = asprintf(&h, "%lu", (unsigned long)(LONG_MAX)+1);
+  printf("<%lu>\n", (unsigned long)(LONG_MAX)+1);
+  printf("<%s>\n", holder);
+  printf("<%s>\n\n", h);
+
+#ifdef HAVE_LONG_LONG
+  printf ("<%%llu> LLONG_MAX+1\n");
+  i = snprintf(holder, 100, "%llu", (unsigned long long)(LLONG_MAX)+1);
+  i = asprintf(&h, "%llu", (unsigned long long)(LLONG_MAX)+1);
+  printf("<%llu>\n", (unsigned long long)(LLONG_MAX)+1);
+  printf("<%s>\n", holder);
+  printf("<%s>\n\n", h);
+#endif
+
+#ifdef HAVE_LONG_DOUBLE
+  printf ("<%%6.2LE> 42.42\n");
+  i = snprintf(holder, 100, "%6.2LE", (long double)42.42);
+  i = asprintf(&h, "%6.2LE", (long double)42.42);
+  printf ("<%6.2LE>\n", (long double)42.42);
+  printf ("<%s>\n", holder);
+  printf ("<%s>\n\n", h);
+#endif
+
+#ifdef HAVE_PRINTF_A_FORMAT
+  printf ("<%%6.2A> 42.42\n");
+  i = snprintf(holder, 100, "%6.2A", 42.42);
+  i = asprintf(&h, "%6.2A", 42.42);
+  printf ("<%6.2A>\n", 42.42);
+  printf ("<%s>\n", holder);
+  printf ("<%s>\n\n", h);
+
+  printf ("<%%6.2LA> 42.42\n");
+  i = snprintf(holder, 100, "%6.2LA", (long double)42.42);
+  i = asprintf(&h, "%6.2LA", (long double)42.42);
+  printf ("<%6.2LA>\n", (long double)42.42);
+  printf ("<%s>\n", holder);
+  printf ("<%s>\n\n", h);
+#endif
+
+  printf ("<%%.10240f> DBL_MAX\n");
+  si = snprintf(holder, 100, "%.10240f", DBL_MAX);
+  ai = asprintf(&h, "%.10240f", DBL_MAX);
+  printf ("<%.10240f>\n", DBL_MAX);
+  printf ("<%d> <%s>\n", si, holder);
+  printf ("<%d> <%s>\n\n", ai, h);
+
+  printf ("<%%.10240Lf> LDBL_MAX\n");
+  si = snprintf(holder, 100, "%.10240Lf", (long double)LDBL_MAX);
+  ai = asprintf(&h, "%.10240Lf", (long double)LDBL_MAX);
+  printf ("<%.10240Lf>\n", (long double)LDBL_MAX);
+  printf ("<%d> <%s>\n", si, holder);
+  printf ("<%d> <%s>\n\n", ai, h);
+
+  /* huh? */
+  printf("/%%g/, 421.2345\n");
+  snprintf(holder, sizeof holder, "/%g/\n", 421.2345);
+  asprintf(&h, "/%g/\n", 421.2345);
+  printf("/%g/\n", 421.2345);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("/%%g/, 4214.2345\n");
+  snprintf(holder, sizeof holder, "/%g/\n", 4214.2345);
+  asprintf(&h, "/%g/\n", 4214.2345);
+  printf("/%g/\n", 4214.2345);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("/%%.5g/, 4214.2345\n");
+  snprintf(holder, sizeof holder, "/%.5g/\n", 4214.2345);
+  asprintf(&h, "/%.5g/\n", 4214.2345);
+  printf("/%.5g/\n", 4214.2345);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("/%%.4g/, 4214.2345\n");
+  snprintf(holder, sizeof holder, "/%.4g/\n", 4214.2345);
+  asprintf(&h, "/%.4g/\n", 4214.2345);
+  printf("/%.4g/\n", 4214.2345);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("/%%'ld %%'ld/, 12345, 1234567\n");
+  snprintf(holder, sizeof holder, "/%'ld %'ld/\n", 12345, 1234567);
+  asprintf(&h, "/%'ld %'ld/\n", 12345, 1234567);
+  printf("/%'ld %'ld/\n", 12345, 1234567);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("/%%'ld %%'ld/, 336, 3336\n");
+  snprintf(holder, sizeof holder, "/%'ld %'ld/\n", 336, 3336);
+  asprintf(&h, "/%'ld %'ld/\n", 336, 3336);
+  printf("/%'ld %'ld/\n", 336, 3336);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("/%%'ld %%'ld/, -42786, -142786\n");
+  snprintf(holder, sizeof holder, "/%'ld %'ld/\n", -42786, -142786);
+  asprintf(&h, "/%'ld %'ld/\n", -42786, -142786);
+  printf("/%'ld %'ld/\n", -42786, -142786);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("/%%'f %%'f/, 421.2345, 421234.56789\n");
+  snprintf(holder, sizeof holder, "/%'f %'f/\n", 421.2345, 421234.56789);
+  asprintf(&h, "/%'f %'f/\n", 421.2345, 421234.56789);
+  printf("/%'f %'f/\n", 421.2345, 421234.56789);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("/%%'f %%'f/, -421.2345, -421234.56789\n");
+  snprintf(holder, sizeof holder, "/%'f %'f/\n", -421.2345, -421234.56789);
+  asprintf(&h, "/%'f %'f/\n", -421.2345, -421234.56789);
+  printf("/%'f %'f/\n", -421.2345, -421234.56789);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("/%%'g %%'g/, 421.2345, 421234.56789\n");
+  snprintf(holder, sizeof holder, "/%'g %'g/\n", 421.2345, 421234.56789);
+  asprintf(&h, "/%'g %'g/\n", 421.2345, 421234.56789);
+  printf("/%'g %'g/\n", 421.2345, 421234.56789);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  printf("/%%'g %%'g/, -421.2345, -421234.56789\n");
+  snprintf(holder, sizeof holder, "/%'g %'g/\n", -421.2345, -421234.56789);
+  asprintf(&h, "/%'g %'g/\n", -421.2345, -421234.56789);
+  printf("/%'g %'g/\n", -421.2345, -421234.56789);
+  printf("%s", holder);
+  printf("%s\n", h);
+#endif
+
+  printf("/%%'g/, 4213455.8392\n");
+  snprintf(holder, sizeof holder, "/%'g/\n", 4213455.8392);
+  asprintf(&h, "/%'g/\n", 4213455.8392);
+  printf("/%'g/\n", 4213455.8392);
+  printf("%s", holder);
+  printf("%s\n", h);
+
+  exit (0);
+}
+#endif
diff --git a/lib/sh/spell.c b/lib/sh/spell.c
new file mode 100644
index 0000000..cdf465b
--- /dev/null
+++ b/lib/sh/spell.c
@@ -0,0 +1,212 @@
+/* spell.c -- spelling correction for pathnames. */
+
+/* Copyright (C) 2000-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include <bashtypes.h>
+#include <posixdir.h>
+#include <posixstat.h>
+#if defined (HAVE_SYS_PARAM_H)
+#include <sys/param.h>
+#endif
+
+#include <stdio.h>
+
+#include <bashansi.h>
+#include <maxpath.h>
+#include <stdc.h>
+
+static int mindist PARAMS((char *, char *, char *));
+static int spdist PARAMS((char *, char *));
+
+/*
+ * `spname' and its helpers are inspired by the code in "The UNIX
+ * Programming Environment", Kernighan & Pike, Prentice-Hall 1984,
+ * pages 209 - 213.
+ */
+
+/*
+ *	`spname' -- return a correctly spelled filename
+ *
+ *	int spname(char * oldname, char * newname)
+ *	Returns:  -1 if no reasonable match found
+ *		   0 if exact match found
+ *		   1 if corrected
+ *	Stores corrected name in `newname'.
+ */
+int
+spname(oldname, newname)
+     char *oldname;
+     char *newname;
+{
+  char *op, *np, *p;
+  char guess[PATH_MAX + 1], best[PATH_MAX + 1];
+
+  op = oldname;
+  np = newname;
+  for (;;)
+    {
+      while (*op == '/')    /* Skip slashes */
+	*np++ = *op++;
+      *np = '\0';
+
+      if (*op == '\0')    /* Exact or corrected */
+	{
+	  /* `.' is rarely the right thing. */
+	  if (oldname[1] == '\0' && newname[1] == '\0' &&
+		oldname[0] != '.' && newname[0] == '.')
+	    return -1;
+	  return strcmp(oldname, newname) != 0;
+	}
+
+      /* Copy next component into guess */
+      for (p = guess; *op != '/' && *op != '\0'; op++)
+	if (p < guess + PATH_MAX)
+	  *p++ = *op;
+      *p = '\0';
+
+      if (mindist(newname, guess, best) >= 3)
+	return -1;  /* Hopeless */
+
+      /*
+       *  Add to end of newname
+       */
+      for (p = best; *np = *p++; np++)
+	;
+    }
+}
+
+/*
+ *  Search directory for a guess
+ */
+static int
+mindist(dir, guess, best)
+     char *dir;
+     char *guess;
+     char *best;
+{
+  DIR *fd;
+  struct dirent *dp;
+  int dist, x;
+
+  dist = 3;    /* Worst distance */
+  if (*dir == '\0')
+    dir = ".";
+
+  if ((fd = opendir(dir)) == NULL)
+    return dist;
+
+  while ((dp = readdir(fd)) != NULL)
+    {
+      /*
+       *  Look for a better guess.  If the new guess is as
+       *  good as the current one, we take it.  This way,
+       *  any single character match will be a better match
+       *  than ".".
+       */
+      x = spdist(dp->d_name, guess);
+      if (x <= dist && x != 3)
+	{
+	  strcpy(best, dp->d_name);
+	  dist = x;
+	  if (dist == 0)    /* Exact match */
+	    break;
+	}
+    }
+  (void)closedir(fd);
+
+  /* Don't return `.' */
+  if (best[0] == '.' && best[1] == '\0')
+    dist = 3;
+  return dist;
+}
+
+/*
+ *  `spdist' -- return the "distance" between two names.
+ *
+ *  int spname(char * oldname, char * newname)
+ *  Returns:  0 if strings are identical
+ *      1 if two characters are transposed
+ *      2 if one character is wrong, added or deleted
+ *      3 otherwise
+ */
+static int
+spdist(cur, new)
+     char *cur, *new;
+{
+  while (*cur == *new)
+    {
+      if (*cur == '\0')
+	return 0;    /* Exact match */
+      cur++;
+      new++;
+    }
+
+  if (*cur)
+    {
+      if (*new)
+	{
+	  if (cur[1] && new[1] && cur[0] == new[1] && cur[1] == new[0] && strcmp (cur + 2, new + 2) == 0)
+	    return 1;  /* Transposition */
+
+	  if (strcmp (cur + 1, new + 1) == 0)
+	    return 2;  /* One character mismatch */
+	}
+
+      if (strcmp(&cur[1], &new[0]) == 0)
+	return 2;    /* Extra character */
+    }
+
+  if (*new && strcmp(cur, new + 1) == 0)
+    return 2;      /* Missing character */
+
+  return 3;
+}
+
+char *
+dirspell (dirname)
+     char *dirname;
+{
+  int n;
+  char *guess;
+
+  n = (strlen (dirname) * 3 + 1) / 2 + 1;
+  guess = (char *)malloc (n);
+  if (guess == 0)
+    return 0;
+
+  switch (spname (dirname, guess))
+    {
+    case -1:
+    default:
+      free (guess);
+      return (char *)NULL;
+    case 0:
+    case 1:
+      return guess;
+    }
+}
diff --git a/lib/sh/strcasecmp.c b/lib/sh/strcasecmp.c
new file mode 100644
index 0000000..70d0551
--- /dev/null
+++ b/lib/sh/strcasecmp.c
@@ -0,0 +1,84 @@
+/* strcasecmp.c - functions for case-insensitive string comparison. */
+
+/* Copyright (C) 1995 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+   
+#include <config.h>
+
+#if !defined (HAVE_STRCASECMP)
+
+#include <stdc.h>
+#include <bashansi.h>
+#include <chartypes.h>
+
+/* Compare at most COUNT characters from string1 to string2.  Case
+   doesn't matter. */
+int
+strncasecmp (string1, string2, count)
+     const char *string1;
+     const char *string2;
+     size_t count;
+{
+  register const char *s1;
+  register const char *s2;
+  register int r;
+
+  if (count <= 0 || (string1 == string2))
+    return 0;
+
+  s1 = string1;
+  s2 = string2;
+  do
+    {
+      if ((r = TOLOWER ((unsigned char) *s1) - TOLOWER ((unsigned char) *s2)) != 0)
+	return r;
+      if (*s1++ == '\0')
+	break;
+      s2++;
+    }
+  while (--count != 0);
+
+  return (0);
+}
+
+/* strcmp (), but caseless. */
+int
+strcasecmp (string1, string2)
+     const char *string1;
+     const char *string2;
+{
+  register const char *s1;
+  register const char *s2;
+  register int r;
+
+  s1 = string1;
+  s2 = string2;
+
+  if (s1 == s2)
+    return (0);
+
+  while ((r = TOLOWER ((unsigned char)*s1) - TOLOWER ((unsigned char)*s2)) == 0)
+    {
+      if (*s1++ == '\0')
+	return 0;
+      s2++;
+    }
+
+  return (r);
+}
+#endif /* !HAVE_STRCASECMP */
diff --git a/lib/sh/strcasestr.c b/lib/sh/strcasestr.c
new file mode 100644
index 0000000..c819b3e
--- /dev/null
+++ b/lib/sh/strcasestr.c
@@ -0,0 +1,46 @@
+/* strcasestr.c - Find if one string appears as a substring of another string,
+		  without regard to case. */
+
+/* Copyright (C) 2000 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#include <bashansi.h>
+#include <chartypes.h>
+
+#include <stdc.h>
+
+/* Determine if s2 occurs in s1.  If so, return a pointer to the
+   match in s1.  The compare is case insensitive.  This is a
+   case-insensitive strstr(3). */
+char *
+strcasestr (s1, s2)
+     const char *s1;
+     const char *s2;
+{
+  register int i, l, len, c;
+
+  c = TOLOWER ((unsigned char)s2[0]);
+  len = strlen (s1);
+  l = strlen (s2);
+  for (i = 0; (len - i) >= l; i++)
+    if ((TOLOWER ((unsigned char)s1[i]) == c) && (strncasecmp (s1 + i, s2, l) == 0))
+      return ((char *)s1 + i);
+  return ((char *)0);
+}
diff --git a/lib/sh/strchrnul.c b/lib/sh/strchrnul.c
new file mode 100644
index 0000000..00cb88c
--- /dev/null
+++ b/lib/sh/strchrnul.c
@@ -0,0 +1,35 @@
+/* Searching in a string.
+   Copyright (C) 2012 Free Software Foundation, Inc.
+
+   This program is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include <config.h>
+#include <stdio.h>
+
+/* Specification.  */
+#include <string.h>
+
+/* Find the first occurrence of C in S or the final NUL byte.  */
+char *
+strchrnul (s, c_in)
+     const char *s;
+     int c_in;
+{
+  char c;
+  register char *s1;
+
+  for (c = c_in, s1 = (char *)s; s1 && *s1 && *s1 != c; s1++)
+    ;
+  return (s1);
+}
diff --git a/lib/sh/strdup.c b/lib/sh/strdup.c
new file mode 100644
index 0000000..90fa353
--- /dev/null
+++ b/lib/sh/strdup.c
@@ -0,0 +1,42 @@
+/* strdup - return a copy of a string in newly-allocated memory. */
+
+/* Copyright (C) 2013 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+   
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+                              
+
+#include <config.h>
+
+/* Get specification.  */
+#include <string.h>
+#include <stdlib.h>
+
+/* Duplicate S, returning an identical malloc'd string.  */
+char *
+strdup (s)
+     const char *s;
+{
+  size_t len;
+  void *new;
+
+  len = strlen (s) + 1;
+  if ((new = malloc (len)) == NULL)
+    return NULL;
+
+  memcpy (new, s, len);
+  return ((char *)new);
+}
diff --git a/lib/sh/strerror.c b/lib/sh/strerror.c
new file mode 100644
index 0000000..bf63926
--- /dev/null
+++ b/lib/sh/strerror.c
@@ -0,0 +1,74 @@
+/* strerror.c - string corresponding to a particular value of errno. */
+
+/* Copyright (C) 1995 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+   
+#include <config.h>
+
+#if !defined (HAVE_STRERROR)
+
+#include <bashtypes.h>
+#if defined (HAVE_SYS_PARAM_H)
+#  include <sys/param.h>
+#endif
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+
+#include <shell.h>
+
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+/* Return a string corresponding to the error number E.  From
+   the ANSI C spec. */
+#if defined (strerror)
+#  undef strerror
+#endif
+
+static char *errbase = "Unknown system error ";
+
+char *
+strerror (e)
+     int e;
+{
+  static char emsg[40];
+#if defined (HAVE_SYS_ERRLIST)
+  extern int sys_nerr;
+  extern char *sys_errlist[];
+
+  if (e > 0 && e < sys_nerr)
+    return (sys_errlist[e]);
+  else
+#endif /* HAVE_SYS_ERRLIST */
+    {
+      char *z;
+
+      z = itos (e);
+      strcpy (emsg, errbase);
+      strcat (emsg, z);
+      free (z);
+      return (&emsg[0]);
+    }
+}
+#endif /* HAVE_STRERROR */
diff --git a/lib/sh/strftime.c b/lib/sh/strftime.c
new file mode 100644
index 0000000..08ccb9a
--- /dev/null
+++ b/lib/sh/strftime.c
@@ -0,0 +1,1015 @@
+/* strftime - formatted time and date to a string */
+/*
+ * Modified slightly by Chet Ramey for inclusion in Bash
+ */
+/*
+ * strftime.c
+ *
+ * Public-domain implementation of ISO C library routine.
+ *
+ * If you can't do prototypes, get GCC.
+ *
+ * The C99 standard now specifies just about all of the formats
+ * that were additional in the earlier versions of this file.
+ *
+ * For extensions from SunOS, add SUNOS_EXT.
+ * For extensions from HP/UX, add HPUX_EXT.
+ * For VMS dates, add VMS_EXT.
+ * For complete POSIX semantics, add POSIX_SEMANTICS.
+ *
+ * The code for %c, %x, and %X follows the C99 specification for
+ * the "C" locale.
+ *
+ * This version ignores LOCALE information.
+ * It also doesn't worry about multi-byte characters.
+ * So there.
+ *
+ * Arnold Robbins
+ * January, February, March, 1991
+ * Updated March, April 1992
+ * Updated April, 1993
+ * Updated February, 1994
+ * Updated May, 1994
+ * Updated January, 1995
+ * Updated September, 1995
+ * Updated January, 1996
+ * Updated July, 1997
+ * Updated October, 1999
+ * Updated September, 2000
+ * Updated December, 2001
+ * Updated January, 2011
+ * Updated April, 2012
+ *
+ * Fixes from ado@elsie.nci.nih.gov,
+ * February 1991, May 1992
+ * Fixes from Tor Lillqvist tml@tik.vtt.fi,
+ * May 1993
+ * Further fixes from ado@elsie.nci.nih.gov,
+ * February 1994
+ * %z code from chip@chinacat.unicom.com,
+ * Applied September 1995
+ * %V code fixed (again) and %G, %g added,
+ * January 1996
+ * %v code fixed, better configuration,
+ * July 1997
+ * Moved to C99 specification.
+ * September 2000
+ * Fixes from Tanaka Akira <akr@m17n.org>
+ * December 2001
+ */
+#include <config.h>
+
+#include <stdio.h>
+#include <ctype.h>
+#include <time.h>
+#include <errno.h>
+
+#if defined(TM_IN_SYS_TIME)
+#include <sys/types.h>
+#include <sys/time.h>
+#endif
+
+#include <stdlib.h>
+#include <string.h>
+
+/* defaults: season to taste */
+#define SUNOS_EXT	1	/* stuff in SunOS strftime routine */
+#define VMS_EXT		1	/* include %v for VMS date format */
+#define HPUX_EXT	1	/* non-conflicting stuff in HP-UX date */
+#define POSIX_SEMANTICS	1	/* call tzset() if TZ changes */
+#define POSIX_2008	1	/* flag and fw for C, F, G, Y formats */
+
+#undef strchr	/* avoid AIX weirdness */
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+#if defined (SHELL)
+extern char *get_string_value (const char *);
+#endif
+
+extern void tzset(void);
+static int weeknumber(const struct tm *timeptr, int firstweekday);
+static int iso8601wknum(const struct tm *timeptr);
+
+#ifndef inline
+#ifdef __GNUC__
+#define inline	__inline__
+#else
+#define inline	/**/
+#endif
+#endif
+
+#define range(low, item, hi)	max(low, min(item, hi))
+
+/* Whew! This stuff is a mess. */
+#if !defined(OS2) && !defined(MSDOS) && !defined(__CYGWIN__) && defined(HAVE_TZNAME)
+extern char *tzname[2];
+extern int daylight;
+#if defined(SOLARIS) || defined(mips) || defined (M_UNIX)
+extern long int timezone, altzone;
+#else
+#  if defined (HPUX) || defined(__hpux)
+extern long int timezone;
+#  else
+#    if !defined(__CYGWIN__)
+extern int timezone, altzone;
+#    endif
+#  endif
+#endif
+#endif
+
+#undef min	/* just in case */
+
+/* min --- return minimum of two numbers */
+
+static inline int
+min(int a, int b)
+{
+	return (a < b ? a : b);
+}
+
+#undef max	/* also, just in case */
+
+/* max --- return maximum of two numbers */
+
+static inline int
+max(int a, int b)
+{
+	return (a > b ? a : b);
+}
+
+#ifdef POSIX_2008
+/* iso_8601_2000_year --- format a year per ISO 8601:2000 as in 1003.1 */
+
+static void
+iso_8601_2000_year(char *buf, int year, size_t fw)
+{
+	int extra;
+	char sign = '\0';
+
+	if (year >= -9999 && year <= 9999) {
+		sprintf(buf, "%0*d", (int) fw, year);
+		return;
+	}
+
+	/* now things get weird */
+	if (year > 9999) {
+		sign = '+';
+	} else {
+		sign = '-';
+		year = -year;
+	}
+
+	extra = year / 10000;
+	year %= 10000;
+	sprintf(buf, "%c_%04d_%d", sign, extra, year);
+}
+#endif /* POSIX_2008 */
+
+/* strftime --- produce formatted time */
+
+size_t
+strftime(char *s, size_t maxsize, const char *format, const struct tm *timeptr)
+{
+	char *endp = s + maxsize;
+	char *start = s;
+	auto char tbuf[100];
+	long off;
+	int i, w, oerrno;
+	long y;
+	static short first = 1;
+#ifdef POSIX_SEMANTICS
+	static char *savetz = NULL;
+	static int savetzlen = 0;
+	char *tz;
+#endif /* POSIX_SEMANTICS */
+#ifndef HAVE_TM_ZONE
+#ifndef HAVE_TM_NAME
+#ifndef HAVE_TZNAME
+#ifndef __CYGWIN__
+	extern char *timezone();
+	struct timeval tv;
+	struct timezone zone;
+#endif /* __CYGWIN__ */
+#endif /* HAVE_TZNAME */
+#endif /* HAVE_TM_NAME */
+#endif /* HAVE_TM_ZONE */
+#ifdef POSIX_2008
+	int pad;
+	size_t fw;
+	char flag;
+#endif /* POSIX_2008 */
+
+	/* various tables, useful in North America */
+	static const char *days_a[] = {
+		"Sun", "Mon", "Tue", "Wed",
+		"Thu", "Fri", "Sat",
+	};
+	static const char *days_l[] = {
+		"Sunday", "Monday", "Tuesday", "Wednesday",
+		"Thursday", "Friday", "Saturday",
+	};
+	static const char *months_a[] = {
+		"Jan", "Feb", "Mar", "Apr", "May", "Jun",
+		"Jul", "Aug", "Sep", "Oct", "Nov", "Dec",
+	};
+	static const char *months_l[] = {
+		"January", "February", "March", "April",
+		"May", "June", "July", "August", "September",
+		"October", "November", "December",
+	};
+	static const char *ampm[] = { "AM", "PM", };
+
+	oerrno = errno;
+
+	if (s == NULL || format == NULL || timeptr == NULL || maxsize == 0)
+		return 0;
+
+	/* quick check if we even need to bother */
+	if (strchr(format, '%') == NULL && strlen(format) + 1 >= maxsize)
+		return 0;
+
+#ifndef POSIX_SEMANTICS
+	if (first) {
+		tzset();
+		first = 0;
+	}
+#else	/* POSIX_SEMANTICS */
+#if defined (SHELL)
+	tz = get_string_value ("TZ");
+#else
+	tz = getenv("TZ");
+#endif
+	if (first) {
+		if (tz != NULL) {
+			int tzlen = strlen(tz);
+
+			savetz = (char *) malloc(tzlen + 1);
+			if (savetz != NULL) {
+				savetzlen = tzlen + 1;
+				strcpy(savetz, tz);
+			}
+		}
+		tzset();
+		first = 0;
+	}
+	/* if we have a saved TZ, and it is different, recapture and reset */
+	if (tz && savetz && (tz[0] != savetz[0] || strcmp(tz, savetz) != 0)) {
+		i = strlen(tz) + 1;
+		if (i > savetzlen) {
+			savetz = (char *) realloc(savetz, i);
+			if (savetz) {
+				savetzlen = i;
+				strcpy(savetz, tz);
+			}
+		} else
+			strcpy(savetz, tz);
+		tzset();
+	}
+#endif	/* POSIX_SEMANTICS */
+
+	for (; *format && s < endp - 1; format++) {
+		tbuf[0] = '\0';
+		if (*format != '%') {
+			*s++ = *format;
+			continue;
+		}
+#ifdef POSIX_2008
+		pad = '\0';
+		fw = 0;
+		flag = '\0';
+		switch (*++format) {
+		case '+':
+			flag = '+';
+			/* fall through */
+		case '0':
+			pad = '0';
+			format++;
+			break;
+
+		case '1':
+		case '2':
+		case '3':
+		case '4':
+		case '5':
+		case '6':
+		case '7':
+		case '8':
+		case '9':
+			break;
+
+		default:
+			format--;
+			goto again;
+		}
+		for (; isdigit(*format); format++) {
+			fw = fw * 10 + (*format - '0');
+		}
+		format--;
+#endif /* POSIX_2008 */
+
+	again:
+		switch (*++format) {
+		case '\0':
+			*s++ = '%';
+			goto out;
+
+		case '%':
+			*s++ = '%';
+			continue;
+
+		case 'a':	/* abbreviated weekday name */
+			if (timeptr->tm_wday < 0 || timeptr->tm_wday > 6)
+				strcpy(tbuf, "?");
+			else
+				strcpy(tbuf, days_a[timeptr->tm_wday]);
+			break;
+
+		case 'A':	/* full weekday name */
+			if (timeptr->tm_wday < 0 || timeptr->tm_wday > 6)
+				strcpy(tbuf, "?");
+			else
+				strcpy(tbuf, days_l[timeptr->tm_wday]);
+			break;
+
+		case 'b':	/* abbreviated month name */
+		short_month:
+			if (timeptr->tm_mon < 0 || timeptr->tm_mon > 11)
+				strcpy(tbuf, "?");
+			else
+				strcpy(tbuf, months_a[timeptr->tm_mon]);
+			break;
+
+		case 'B':	/* full month name */
+			if (timeptr->tm_mon < 0 || timeptr->tm_mon > 11)
+				strcpy(tbuf, "?");
+			else
+				strcpy(tbuf, months_l[timeptr->tm_mon]);
+			break;
+
+		case 'c':	/* appropriate date and time representation */
+			/*
+			 * This used to be:
+			 *
+			 * strftime(tbuf, sizeof tbuf, "%a %b %e %H:%M:%S %Y", timeptr);
+			 *
+			 * Now, per the ISO 1999 C standard, it this:
+			 */
+			strftime(tbuf, sizeof tbuf, "%A %B %d %T %Y", timeptr);
+			break;
+
+		case 'C':
+#ifdef POSIX_2008
+			if (pad != '\0' && fw > 0) {
+				size_t min_fw = (flag ? 3 : 2);
+
+				fw = max(fw, min_fw);
+				sprintf(tbuf, flag
+						? "%+0*ld"
+						: "%0*ld", (int) fw,
+						(timeptr->tm_year + 1900L) / 100);
+			} else
+#endif /* POSIX_2008 */
+		century:
+				sprintf(tbuf, "%02ld", (timeptr->tm_year + 1900L) / 100);
+			break;
+
+		case 'd':	/* day of the month, 01 - 31 */
+			i = range(1, timeptr->tm_mday, 31);
+			sprintf(tbuf, "%02d", i);
+			break;
+
+		case 'D':	/* date as %m/%d/%y */
+			strftime(tbuf, sizeof tbuf, "%m/%d/%y", timeptr);
+			break;
+
+		case 'e':	/* day of month, blank padded */
+			sprintf(tbuf, "%2d", range(1, timeptr->tm_mday, 31));
+			break;
+
+		case 'E':
+			/* POSIX (now C99) locale extensions, ignored for now */
+			goto again;
+
+		case 'F':	/* ISO 8601 date representation */
+		{
+#ifdef POSIX_2008
+			/*
+			 * Field width for %F is for the whole thing.
+			 * It must be at least 10.
+			 */
+			char m_d[10];
+			strftime(m_d, sizeof m_d, "-%m-%d", timeptr);
+			size_t min_fw = 10;
+
+			if (pad != '\0' && fw > 0) {
+				fw = max(fw, min_fw);
+			} else {
+				fw = min_fw;
+			}
+
+			fw -= 6;	/* -XX-XX at end are invariant */
+
+			iso_8601_2000_year(tbuf, timeptr->tm_year + 1900, fw);
+			strcat(tbuf, m_d);
+#else
+			strftime(tbuf, sizeof tbuf, "%Y-%m-%d", timeptr);
+#endif /* POSIX_2008 */
+		}
+			break;
+
+		case 'g':
+		case 'G':
+			/*
+			 * Year of ISO week.
+			 *
+			 * If it's December but the ISO week number is one,
+			 * that week is in next year.
+			 * If it's January but the ISO week number is 52 or
+			 * 53, that week is in last year.
+			 * Otherwise, it's this year.
+			 */
+			w = iso8601wknum(timeptr);
+			if (timeptr->tm_mon == 11 && w == 1)
+				y = 1900L + timeptr->tm_year + 1;
+			else if (timeptr->tm_mon == 0 && w >= 52)
+				y = 1900L + timeptr->tm_year - 1;
+			else
+				y = 1900L + timeptr->tm_year;
+
+			if (*format == 'G') {
+#ifdef POSIX_2008
+				if (pad != '\0' && fw > 0) {
+					size_t min_fw = 4;
+
+					fw = max(fw, min_fw);
+					sprintf(tbuf, flag
+							? "%+0*ld"
+							: "%0*ld", (int) fw,
+							y);
+				} else
+#endif /* POSIX_2008 */
+					sprintf(tbuf, "%ld", y);
+			}
+			else
+				sprintf(tbuf, "%02ld", y % 100);
+			break;
+
+		case 'h':	/* abbreviated month name */
+			goto short_month;
+
+		case 'H':	/* hour, 24-hour clock, 00 - 23 */
+			i = range(0, timeptr->tm_hour, 23);
+			sprintf(tbuf, "%02d", i);
+			break;
+
+		case 'I':	/* hour, 12-hour clock, 01 - 12 */
+			i = range(0, timeptr->tm_hour, 23);
+			if (i == 0)
+				i = 12;
+			else if (i > 12)
+				i -= 12;
+			sprintf(tbuf, "%02d", i);
+			break;
+
+		case 'j':	/* day of the year, 001 - 366 */
+			sprintf(tbuf, "%03d", timeptr->tm_yday + 1);
+			break;
+
+		case 'm':	/* month, 01 - 12 */
+			i = range(0, timeptr->tm_mon, 11);
+			sprintf(tbuf, "%02d", i + 1);
+			break;
+
+		case 'M':	/* minute, 00 - 59 */
+			i = range(0, timeptr->tm_min, 59);
+			sprintf(tbuf, "%02d", i);
+			break;
+
+		case 'n':	/* same as \n */
+			tbuf[0] = '\n';
+			tbuf[1] = '\0';
+			break;
+
+		case 'O':
+			/* POSIX (now C99) locale extensions, ignored for now */
+			goto again;
+
+		case 'p':	/* am or pm based on 12-hour clock */
+			i = range(0, timeptr->tm_hour, 23);
+			if (i < 12)
+				strcpy(tbuf, ampm[0]);
+			else
+				strcpy(tbuf, ampm[1]);
+			break;
+
+		case 'r':	/* time as %I:%M:%S %p */
+			strftime(tbuf, sizeof tbuf, "%I:%M:%S %p", timeptr);
+			break;
+
+		case 'R':	/* time as %H:%M */
+			strftime(tbuf, sizeof tbuf, "%H:%M", timeptr);
+			break;
+
+#if defined(HAVE_MKTIME)
+		case 's':	/* time as seconds since the Epoch */
+		{
+			struct tm non_const_timeptr;
+
+			non_const_timeptr = *timeptr;
+			sprintf(tbuf, "%ld", mktime(& non_const_timeptr));
+			break;
+		}
+#endif /* defined(HAVE_MKTIME) */
+
+		case 'S':	/* second, 00 - 60 */
+			i = range(0, timeptr->tm_sec, 60);
+			sprintf(tbuf, "%02d", i);
+			break;
+
+		case 't':	/* same as \t */
+			tbuf[0] = '\t';
+			tbuf[1] = '\0';
+			break;
+
+		case 'T':	/* time as %H:%M:%S */
+		the_time:
+			strftime(tbuf, sizeof tbuf, "%H:%M:%S", timeptr);
+			break;
+
+		case 'u':
+		/* ISO 8601: Weekday as a decimal number [1 (Monday) - 7] */
+			sprintf(tbuf, "%d", timeptr->tm_wday == 0 ? 7 :
+					timeptr->tm_wday);
+			break;
+
+		case 'U':	/* week of year, Sunday is first day of week */
+			sprintf(tbuf, "%02d", weeknumber(timeptr, 0));
+			break;
+
+		case 'V':	/* week of year according ISO 8601 */
+			sprintf(tbuf, "%02d", iso8601wknum(timeptr));
+			break;
+
+		case 'w':	/* weekday, Sunday == 0, 0 - 6 */
+			i = range(0, timeptr->tm_wday, 6);
+			sprintf(tbuf, "%d", i);
+			break;
+
+		case 'W':	/* week of year, Monday is first day of week */
+			sprintf(tbuf, "%02d", weeknumber(timeptr, 1));
+			break;
+
+		case 'x':	/* appropriate date representation */
+			strftime(tbuf, sizeof tbuf, "%A %B %d %Y", timeptr);
+			break;
+
+		case 'X':	/* appropriate time representation */
+			goto the_time;
+			break;
+
+		case 'y':	/* year without a century, 00 - 99 */
+		year:
+			i = timeptr->tm_year % 100;
+			sprintf(tbuf, "%02d", i);
+			break;
+
+		case 'Y':	/* year with century */
+#ifdef POSIX_2008
+			if (pad != '\0' && fw > 0) {
+				size_t min_fw = 4;
+
+				fw = max(fw, min_fw);
+				sprintf(tbuf, flag
+						? "%+0*ld"
+						: "%0*ld", (int) fw,
+						1900L + timeptr->tm_year);
+			} else
+#endif /* POSIX_2008 */
+			sprintf(tbuf, "%ld", 1900L + timeptr->tm_year);
+			break;
+
+		/*
+		 * From: Chip Rosenthal <chip@chinacat.unicom.com>
+		 * Date: Sun, 19 Mar 1995 00:33:29 -0600 (CST)
+		 * 
+		 * Warning: the %z [code] is implemented by inspecting the
+		 * timezone name conditional compile settings, and
+		 * inferring a method to get timezone offsets. I've tried
+		 * this code on a couple of machines, but I don't doubt
+		 * there is some system out there that won't like it.
+		 * Maybe the easiest thing to do would be to bracket this
+		 * with an #ifdef that can turn it off. The %z feature
+		 * would be an admittedly obscure one that most folks can
+		 * live without, but it would be a great help to those of
+		 * us that muck around with various message processors.
+		 */
+ 		case 'z':	/* time zone offset east of GMT e.g. -0600 */
+ 			if (timeptr->tm_isdst < 0)
+ 				break;
+#ifdef HAVE_TM_NAME
+			/*
+			 * Systems with tm_name probably have tm_tzadj as
+			 * secs west of GMT.  Convert to mins east of GMT.
+			 */
+			off = -timeptr->tm_tzadj / 60;
+#else /* !HAVE_TM_NAME */
+#ifdef HAVE_TM_ZONE
+			/*
+			 * Systems with tm_zone probably have tm_gmtoff as
+			 * secs east of GMT.  Convert to mins east of GMT.
+			 */
+			off = timeptr->tm_gmtoff / 60;
+#else /* !HAVE_TM_ZONE */
+#if HAVE_TZNAME
+			/*
+			 * Systems with tzname[] probably have timezone as
+			 * secs west of GMT.  Convert to mins east of GMT.
+			 */
+#  if defined(__hpux) || defined (HPUX) || defined(__CYGWIN__)
+			off = -timezone / 60;
+#  else
+			/* ADR: 4 August 2001, fixed this per gazelle@interaccess.com */
+			off = -(daylight ? altzone : timezone) / 60;
+#  endif
+#else /* !HAVE_TZNAME */
+			gettimeofday(& tv, & zone);
+			off = -zone.tz_minuteswest;
+#endif /* !HAVE_TZNAME */
+#endif /* !HAVE_TM_ZONE */
+#endif /* !HAVE_TM_NAME */
+			if (off < 0) {
+				tbuf[0] = '-';
+				off = -off;
+			} else {
+				tbuf[0] = '+';
+			}
+			sprintf(tbuf+1, "%02ld%02ld", off/60, off%60);
+			break;
+
+		case 'Z':	/* time zone name or abbreviation */
+#ifdef HAVE_TZNAME
+			i = (daylight && timeptr->tm_isdst > 0); /* 0 or 1 */
+			strcpy(tbuf, tzname[i]);
+#else
+#ifdef HAVE_TM_ZONE
+			strcpy(tbuf, timeptr->tm_zone);
+#else
+#ifdef HAVE_TM_NAME
+			strcpy(tbuf, timeptr->tm_name);
+#else
+			gettimeofday(& tv, & zone);
+			strcpy(tbuf, timezone(zone.tz_minuteswest,
+						timeptr->tm_isdst > 0));
+#endif /* HAVE_TM_NAME */
+#endif /* HAVE_TM_ZONE */
+#endif /* HAVE_TZNAME */
+			break;
+
+#ifdef SUNOS_EXT
+		case 'k':	/* hour, 24-hour clock, blank pad */
+			sprintf(tbuf, "%2d", range(0, timeptr->tm_hour, 23));
+			break;
+
+		case 'l':	/* hour, 12-hour clock, 1 - 12, blank pad */
+			i = range(0, timeptr->tm_hour, 23);
+			if (i == 0)
+				i = 12;
+			else if (i > 12)
+				i -= 12;
+			sprintf(tbuf, "%2d", i);
+			break;
+#endif
+
+#ifdef HPUX_EXT
+		case 'N':	/* Emperor/Era name */
+			/* this is essentially the same as the century */
+			goto century;	/* %C */
+
+		case 'o':	/* Emperor/Era year */
+			goto year;	/* %y */
+#endif /* HPUX_EXT */
+
+
+#ifdef VMS_EXT
+		case 'v':	/* date as dd-bbb-YYYY */
+			sprintf(tbuf, "%2d-%3.3s-%4ld",
+				range(1, timeptr->tm_mday, 31),
+				months_a[range(0, timeptr->tm_mon, 11)],
+				timeptr->tm_year + 1900L);
+			for (i = 3; i < 6; i++)
+				if (islower(tbuf[i]))
+					tbuf[i] = toupper(tbuf[i]);
+			break;
+#endif
+
+		default:
+			tbuf[0] = '%';
+			tbuf[1] = *format;
+			tbuf[2] = '\0';
+			break;
+		}
+		i = strlen(tbuf);
+		if (i) {
+			if (s + i < endp - 1) {
+				strcpy(s, tbuf);
+				s += i;
+			} else
+				return 0;
+		}
+	}
+out:
+	if (s < endp && *format == '\0') {
+		*s = '\0';
+		if (s == start)
+			errno = oerrno;
+		return (s - start);
+	} else
+		return 0;
+}
+
+/* isleap --- is a year a leap year? */
+
+static int
+isleap(long year)
+{
+	return ((year % 4 == 0 && year % 100 != 0) || year % 400 == 0);
+}
+
+
+/* iso8601wknum --- compute week number according to ISO 8601 */
+
+static int
+iso8601wknum(const struct tm *timeptr)
+{
+	/*
+	 * From 1003.2:
+	 *	If the week (Monday to Sunday) containing January 1
+	 *	has four or more days in the new year, then it is week 1;
+	 *	otherwise it is the highest numbered week of the previous
+	 *	year (52 or 53), and the next week is week 1.
+	 *
+	 * ADR: This means if Jan 1 was Monday through Thursday,
+	 *	it was week 1, otherwise week 52 or 53.
+	 *
+	 * XPG4 erroneously included POSIX.2 rationale text in the
+	 * main body of the standard. Thus it requires week 53.
+	 */
+
+	int weeknum, jan1day, diff;
+
+	/* get week number, Monday as first day of the week */
+	weeknum = weeknumber(timeptr, 1);
+
+	/*
+	 * With thanks and tip of the hatlo to tml@tik.vtt.fi
+	 *
+	 * What day of the week does January 1 fall on?
+	 * We know that
+	 *	(timeptr->tm_yday - jan1.tm_yday) MOD 7 ==
+	 *		(timeptr->tm_wday - jan1.tm_wday) MOD 7
+	 * and that
+	 * 	jan1.tm_yday == 0
+	 * and that
+	 * 	timeptr->tm_wday MOD 7 == timeptr->tm_wday
+	 * from which it follows that. . .
+ 	 */
+	jan1day = timeptr->tm_wday - (timeptr->tm_yday % 7);
+	if (jan1day < 0)
+		jan1day += 7;
+
+	/*
+	 * If Jan 1 was a Monday through Thursday, it was in
+	 * week 1.  Otherwise it was last year's highest week, which is
+	 * this year's week 0.
+	 *
+	 * What does that mean?
+	 * If Jan 1 was Monday, the week number is exactly right, it can
+	 *	never be 0.
+	 * If it was Tuesday through Thursday, the weeknumber is one
+	 *	less than it should be, so we add one.
+	 * Otherwise, Friday, Saturday or Sunday, the week number is
+	 * OK, but if it is 0, it needs to be 52 or 53.
+	 */
+	switch (jan1day) {
+	case 1:		/* Monday */
+		break;
+	case 2:		/* Tuesday */
+	case 3:		/* Wednesday */
+	case 4:		/* Thursday */
+		weeknum++;
+		break;
+	case 5:		/* Friday */
+	case 6:		/* Saturday */
+	case 0:		/* Sunday */
+		if (weeknum == 0) {
+#ifdef USE_BROKEN_XPG4
+			/* XPG4 (as of March 1994) says 53 unconditionally */
+			weeknum = 53;
+#else
+			/* get week number of last week of last year */
+			struct tm dec31ly;	/* 12/31 last year */
+			dec31ly = *timeptr;
+			dec31ly.tm_year--;
+			dec31ly.tm_mon = 11;
+			dec31ly.tm_mday = 31;
+			dec31ly.tm_wday = (jan1day == 0) ? 6 : jan1day - 1;
+			dec31ly.tm_yday = 364 + isleap(dec31ly.tm_year + 1900L);
+			weeknum = iso8601wknum(& dec31ly);
+#endif
+		}
+		break;
+	}
+
+	if (timeptr->tm_mon == 11) {
+		/*
+		 * The last week of the year
+		 * can be in week 1 of next year.
+		 * Sigh.
+		 *
+		 * This can only happen if
+		 *	M   T  W
+		 *	29  30 31
+		 *	30  31
+		 *	31
+		 */
+		int wday, mday;
+
+		wday = timeptr->tm_wday;
+		mday = timeptr->tm_mday;
+		if (   (wday == 1 && (mday >= 29 && mday <= 31))
+		    || (wday == 2 && (mday == 30 || mday == 31))
+		    || (wday == 3 &&  mday == 31))
+			weeknum = 1;
+	}
+
+	return weeknum;
+}
+
+/* weeknumber --- figure how many weeks into the year */
+
+/* With thanks and tip of the hatlo to ado@elsie.nci.nih.gov */
+
+static int
+weeknumber(const struct tm *timeptr, int firstweekday)
+{
+	int wday = timeptr->tm_wday;
+	int ret;
+
+	if (firstweekday == 1) {
+		if (wday == 0)	/* sunday */
+			wday = 6;
+		else
+			wday--;
+	}
+	ret = ((timeptr->tm_yday + 7 - wday) / 7);
+	if (ret < 0)
+		ret = 0;
+	return ret;
+}
+
+#if 0
+/* ADR --- I'm loathe to mess with ado's code ... */
+
+Date:         Wed, 24 Apr 91 20:54:08 MDT
+From: Michal Jaegermann <audfax!emory!vm.ucs.UAlberta.CA!NTOMCZAK>
+To: arnold@audiofax.com
+
+Hi Arnold,
+in a process of fixing of strftime() in libraries on Atari ST I grabbed
+some pieces of code from your own strftime.  When doing that it came
+to mind that your weeknumber() function compiles a little bit nicer
+in the following form:
+/*
+ * firstweekday is 0 if starting in Sunday, non-zero if in Monday
+ */
+{
+    return (timeptr->tm_yday - timeptr->tm_wday +
+	    (firstweekday ? (timeptr->tm_wday ? 8 : 1) : 7)) / 7;
+}
+How nicer it depends on a compiler, of course, but always a tiny bit.
+
+   Cheers,
+   Michal
+   ntomczak@vm.ucs.ualberta.ca
+#endif
+
+#ifdef	TEST_STRFTIME
+
+/*
+ * NAME:
+ *	tst
+ *
+ * SYNOPSIS:
+ *	tst
+ *
+ * DESCRIPTION:
+ *	"tst" is a test driver for the function "strftime".
+ *
+ * OPTIONS:
+ *	None.
+ *
+ * AUTHOR:
+ *	Karl Vogel
+ *	Control Data Systems, Inc.
+ *	vogelke@c-17igp.wpafb.af.mil
+ *
+ * BUGS:
+ *	None noticed yet.
+ *
+ * COMPILE:
+ *	cc -o tst -DTEST_STRFTIME strftime.c
+ */
+
+/* ADR: I reformatted this to my liking, and deleted some unneeded code. */
+
+#ifndef NULL
+#include	<stdio.h>
+#endif
+#include	<sys/time.h>
+#include	<string.h>
+
+#define		MAXTIME		132
+
+/*
+ * Array of time formats.
+ */
+
+static char *array[] =
+{
+	"(%%A)      full weekday name, var length (Sunday..Saturday)  %A",
+	"(%%B)       full month name, var length (January..December)  %B",
+	"(%%C)                                               Century  %C",
+	"(%%D)                                       date (%%m/%%d/%%y)  %D",
+	"(%%E)                           Locale extensions (ignored)  %E",
+	"(%%F)       full month name, var length (January..December)  %F",
+	"(%%H)                          hour (24-hour clock, 00..23)  %H",
+	"(%%I)                          hour (12-hour clock, 01..12)  %I",
+	"(%%M)                                       minute (00..59)  %M",
+	"(%%N)                                      Emperor/Era Name  %N",
+	"(%%O)                           Locale extensions (ignored)  %O",
+	"(%%R)                                 time, 24-hour (%%H:%%M)  %R",
+	"(%%S)                                       second (00..60)  %S",
+	"(%%T)                              time, 24-hour (%%H:%%M:%%S)  %T",
+	"(%%U)    week of year, Sunday as first day of week (00..53)  %U",
+	"(%%V)                    week of year according to ISO 8601  %V",
+	"(%%W)    week of year, Monday as first day of week (00..53)  %W",
+	"(%%X)     appropriate locale time representation (%H:%M:%S)  %X",
+	"(%%Y)                           year with century (1970...)  %Y",
+	"(%%Z) timezone (EDT), or blank if timezone not determinable  %Z",
+	"(%%a)          locale's abbreviated weekday name (Sun..Sat)  %a",
+	"(%%b)            locale's abbreviated month name (Jan..Dec)  %b",
+	"(%%c)           full date (Sat Nov  4 12:02:33 1989)%n%t%t%t  %c",
+	"(%%d)                             day of the month (01..31)  %d",
+	"(%%e)               day of the month, blank-padded ( 1..31)  %e",
+	"(%%h)                                should be same as (%%b)  %h",
+	"(%%j)                            day of the year (001..366)  %j",
+	"(%%k)               hour, 24-hour clock, blank pad ( 0..23)  %k",
+	"(%%l)               hour, 12-hour clock, blank pad ( 0..12)  %l",
+	"(%%m)                                        month (01..12)  %m",
+	"(%%o)                                      Emperor/Era Year  %o",
+	"(%%p)              locale's AM or PM based on 12-hour clock  %p",
+	"(%%r)                   time, 12-hour (same as %%I:%%M:%%S %%p)  %r",
+	"(%%u) ISO 8601: Weekday as decimal number [1 (Monday) - 7]   %u",
+	"(%%v)                                VMS date (dd-bbb-YYYY)  %v",
+	"(%%w)                       day of week (0..6, Sunday == 0)  %w",
+	"(%%x)                appropriate locale date representation  %x",
+	"(%%y)                      last two digits of year (00..99)  %y",
+	"(%%z)      timezone offset east of GMT as HHMM (e.g. -0500)  %z",
+	(char *) NULL
+};
+
+/* main routine. */
+
+int
+main(argc, argv)
+int argc;
+char **argv;
+{
+	long time();
+
+	char *next;
+	char string[MAXTIME];
+
+	int k;
+	int length;
+
+	struct tm *tm;
+
+	long clock;
+
+	/* Call the function. */
+
+	clock = time((long *) 0);
+	tm = localtime(&clock);
+
+	for (k = 0; next = array[k]; k++) {
+		length = strftime(string, MAXTIME, next, tm);
+		printf("%s\n", string);
+	}
+
+	exit(0);
+}
+#endif	/* TEST_STRFTIME */
diff --git a/lib/sh/stringlist.c b/lib/sh/stringlist.c
new file mode 100644
index 0000000..3f28b63
--- /dev/null
+++ b/lib/sh/stringlist.c
@@ -0,0 +1,297 @@
+/* stringlist.c - functions to handle a generic `list of strings' structure */
+
+/* Copyright (C) 2000-2019 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include <bashansi.h>
+
+#include "shell.h"
+
+#ifdef STRDUP
+#  undef STRDUP
+#endif
+#define STRDUP(x)	((x) ? savestring (x) : (char *)NULL)
+
+/* Allocate a new STRINGLIST, with room for N strings. */
+
+STRINGLIST *
+strlist_create (n)
+     int n;
+{
+  STRINGLIST *ret;
+  register int i;
+
+  ret = (STRINGLIST *)xmalloc (sizeof (STRINGLIST));
+  if (n)
+    {
+      ret->list = strvec_create (n+1);
+      ret->list_size = n;
+      for (i = 0; i < n; i++)
+	ret->list[i] = (char *)NULL;
+    }
+  else
+    {
+      ret->list = (char **)NULL;
+      ret->list_size = 0;
+    }
+  ret->list_len = 0;
+  return ret;
+}
+
+STRINGLIST *
+strlist_resize (sl, n)
+     STRINGLIST *sl;
+     int n;
+{
+  register int i;
+
+  if (sl == 0)
+    return (sl = strlist_create (n));
+
+  if (n > sl->list_size)
+    {
+      sl->list = strvec_resize (sl->list, n + 1);
+      for (i = sl->list_size; i <= n; i++)
+	sl->list[i] = (char *)NULL;
+      sl->list_size = n;
+    }
+  return sl;
+}
+
+void
+strlist_flush (sl)
+     STRINGLIST *sl;
+{
+  if (sl == 0 || sl->list == 0)
+    return;
+  strvec_flush (sl->list);
+  sl->list_len = 0;
+}
+  
+void
+strlist_dispose (sl)
+     STRINGLIST *sl;
+{
+  if (sl == 0)
+    return;
+  if (sl->list)
+    strvec_dispose (sl->list);
+  free (sl);
+}
+
+int
+strlist_remove (sl, s)
+     STRINGLIST *sl;
+     char *s;
+{
+  int r;
+
+  if (sl == 0 || sl->list == 0 || sl->list_len == 0)
+    return 0;
+
+  r = strvec_remove (sl->list, s);
+  if (r)
+    sl->list_len--;
+  return r;
+}
+
+STRINGLIST *
+strlist_copy (sl)
+     STRINGLIST *sl;
+{
+  STRINGLIST *new;
+  register int i;
+
+  if (sl == 0)
+    return ((STRINGLIST *)0);
+  new = strlist_create (sl->list_size);
+  /* I'd like to use strvec_copy, but that doesn't copy everything. */
+  if (sl->list)
+    {
+      for (i = 0; i < sl->list_size; i++)
+	new->list[i] = STRDUP (sl->list[i]);
+    }
+  new->list_size = sl->list_size;
+  new->list_len = sl->list_len;
+  /* just being careful */
+  if (new->list)
+    new->list[new->list_len] = (char *)NULL;
+  return new;
+}
+
+/* Return a new STRINGLIST with everything from M1 and M2. */
+
+STRINGLIST *
+strlist_merge (m1, m2)
+     STRINGLIST *m1, *m2;
+{
+  STRINGLIST *sl;
+  int i, n, l1, l2;
+
+  l1 = m1 ? m1->list_len : 0;
+  l2 = m2 ? m2->list_len : 0;
+
+  sl = strlist_create (l1 + l2 + 1);
+  for (i = n = 0; i < l1; i++, n++)
+    sl->list[n] = STRDUP (m1->list[i]);
+  for (i = 0; i < l2; i++, n++)
+    sl->list[n] = STRDUP (m2->list[i]);
+  sl->list_len = n;
+  sl->list[n] = (char *)NULL;
+  return (sl);
+}
+
+/* Make STRINGLIST M1 contain everything in M1 and M2. */
+STRINGLIST *
+strlist_append (m1, m2)
+     STRINGLIST *m1, *m2;
+{
+  register int i, n, len1, len2;
+
+  if (m1 == 0)
+    return (m2 ? strlist_copy (m2) : (STRINGLIST *)0);
+
+  len1 = m1->list_len;
+  len2 = m2 ? m2->list_len : 0;
+
+  if (len2)
+    {
+      m1 = strlist_resize (m1, len1 + len2 + 1);
+      for (i = 0, n = len1; i < len2; i++, n++)
+	m1->list[n] = STRDUP (m2->list[i]);
+      m1->list[n] = (char *)NULL;
+      m1->list_len = n;
+    }
+
+  return m1;
+}
+
+STRINGLIST *
+strlist_prefix_suffix (sl, prefix, suffix)
+     STRINGLIST *sl;
+     char *prefix, *suffix;
+{
+  int plen, slen, tlen, llen, i;
+  char *t;
+
+  if (sl == 0 || sl->list == 0 || sl->list_len == 0)
+    return sl;
+
+  plen = STRLEN (prefix);
+  slen = STRLEN (suffix);
+
+  if (plen == 0 && slen == 0)
+    return (sl);
+
+  for (i = 0; i < sl->list_len; i++)
+    {
+      llen = STRLEN (sl->list[i]);
+      tlen = plen + llen + slen + 1;
+      t = (char *)xmalloc (tlen + 1);
+      if (plen)
+	strcpy (t, prefix);
+      strcpy (t + plen, sl->list[i]);
+      if (slen)
+	strcpy (t + plen + llen, suffix);
+      free (sl->list[i]);
+      sl->list[i] = t;
+    }
+
+  return (sl);	 
+}
+   
+void
+strlist_print (sl, prefix)
+     STRINGLIST *sl;
+     char *prefix;
+{
+  register int i;
+
+  if (sl == 0)
+    return;
+  for (i = 0; i < sl->list_len; i++)
+    printf ("%s%s\n", prefix ? prefix : "", sl->list[i]);
+}
+
+void
+strlist_walk (sl, func)
+     STRINGLIST *sl;
+     sh_strlist_map_func_t *func;
+{
+  register int i;
+
+  if (sl == 0)
+    return;
+  for (i = 0; i < sl->list_len; i++)
+    if ((*func)(sl->list[i]) < 0)
+      break;
+} 
+     
+void
+strlist_sort (sl)
+     STRINGLIST *sl;
+{
+  if (sl == 0 || sl->list_len == 0 || sl->list == 0)
+    return;
+  strvec_sort (sl->list, 0);
+}
+
+STRINGLIST *
+strlist_from_word_list (list, alloc, starting_index, ip)
+     WORD_LIST *list;
+     int alloc, starting_index, *ip;
+{
+  STRINGLIST *ret;
+  int slen, len;
+
+  if (list == 0)
+    {
+      if (ip)
+        *ip = 0;
+      return ((STRINGLIST *)0);
+    }
+  slen = list_length (list);
+  ret = (STRINGLIST *)xmalloc (sizeof (STRINGLIST));
+  ret->list = strvec_from_word_list (list, alloc, starting_index, &len);
+  ret->list_size = slen + starting_index;
+  ret->list_len = len;
+  if (ip)
+    *ip = len;
+  return ret;
+}
+
+WORD_LIST *
+strlist_to_word_list (sl, alloc, starting_index)
+     STRINGLIST *sl;
+     int alloc, starting_index;
+{
+  WORD_LIST *list;
+
+  if (sl == 0 || sl->list == 0)
+    return ((WORD_LIST *)NULL);
+
+  list = strvec_to_word_list (sl->list, alloc, starting_index);
+  return list;
+}
diff --git a/lib/sh/stringvec.c b/lib/sh/stringvec.c
new file mode 100644
index 0000000..8600042
--- /dev/null
+++ b/lib/sh/stringvec.c
@@ -0,0 +1,272 @@
+/* stringvec.c - functions for managing arrays of strings. */
+
+/* Copyright (C) 2000-2002 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#include <bashtypes.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <bashansi.h>
+#include <stdio.h>
+#include <chartypes.h>
+
+#include "shell.h"
+
+/* Allocate an array of strings with room for N members. */
+char **
+strvec_create (n)
+     int n;
+{
+  return ((char **)xmalloc ((n) * sizeof (char *)));
+}
+
+/* Allocate an array of strings with room for N members. */
+char **
+strvec_mcreate (n)
+     int n;
+{
+  return ((char **)malloc ((n) * sizeof (char *)));
+}
+
+char **
+strvec_resize (array, nsize)
+     char **array;
+     int nsize;
+{
+  return ((char **)xrealloc (array, nsize * sizeof (char *)));
+}
+
+char **
+strvec_mresize (array, nsize)
+     char **array;
+     int nsize;
+{
+  return ((char **)realloc (array, nsize * sizeof (char *)));
+}
+
+/* Return the length of ARRAY, a NULL terminated array of char *. */
+int
+strvec_len (array)
+     char **array;
+{
+  register int i;
+
+  for (i = 0; array[i]; i++);
+  return (i);
+}
+
+/* Free the contents of ARRAY, a NULL terminated array of char *. */
+void
+strvec_flush (array)
+     char **array;
+{
+  register int i;
+
+  if (array == 0)
+    return;
+
+  for (i = 0; array[i]; i++)
+    free (array[i]);
+}
+
+void
+strvec_dispose (array)
+     char **array;
+{
+  if (array == 0)
+    return;
+
+  strvec_flush (array);
+  free (array);
+}
+
+int
+strvec_remove (array, name)
+     char **array, *name;
+{
+  register int i, j;
+  char *x;
+
+  if (array == 0)
+    return 0;
+
+  for (i = 0; array[i]; i++)
+    if (STREQ (name, array[i]))
+      {
+	x = array[i];
+	for (j = i; array[j]; j++)
+	  array[j] = array[j + 1];
+	free (x);
+	return 1;
+      }
+  return 0;
+}
+
+/* Find NAME in ARRAY.  Return the index of NAME, or -1 if not present.
+   ARRAY should be NULL terminated. */
+int
+strvec_search (array, name)
+     char **array, *name;
+{
+  int i;
+
+  for (i = 0; array[i]; i++)
+    if (STREQ (name, array[i]))
+      return (i);
+
+  return (-1);
+}
+
+/* Allocate and return a new copy of ARRAY and its contents. */
+char **
+strvec_copy (array)
+     char **array;
+{
+  register int i;
+  int len;
+  char **ret;
+
+  len = strvec_len (array);
+
+  ret = (char **)xmalloc ((len + 1) * sizeof (char *));
+  for (i = 0; array[i]; i++)
+    ret[i] = savestring (array[i]);
+  ret[i] = (char *)NULL;
+
+  return (ret);
+}
+
+/* Comparison routine for use by qsort that conforms to the new Posix
+   requirements (http://austingroupbugs.net/view.php?id=1070).
+
+   Perform a bytewise comparison if *S1 and *S2 collate equally. */
+int
+strvec_posixcmp (s1, s2)
+     register char **s1, **s2;
+{
+  int result;
+
+#if defined (HAVE_STRCOLL)
+   result = strcoll (*s1, *s2);
+   if (result != 0)
+     return result;
+#endif
+
+  if ((result = **s1 - **s2) == 0)
+    result = strcmp (*s1, *s2);
+
+  return (result);
+}
+
+/* Comparison routine for use with qsort() on arrays of strings.  Uses
+   strcoll(3) if available, otherwise it uses strcmp(3). */
+int
+strvec_strcmp (s1, s2)
+     register char **s1, **s2;
+{
+#if defined (HAVE_STRCOLL)
+   return (strcoll (*s1, *s2));
+#else /* !HAVE_STRCOLL */
+  int result;
+
+  if ((result = **s1 - **s2) == 0)
+    result = strcmp (*s1, *s2);
+
+  return (result);
+#endif /* !HAVE_STRCOLL */
+}
+
+/* Sort ARRAY, a null terminated array of pointers to strings. */
+void
+strvec_sort (array, posix)
+     char **array;
+     int posix;
+{
+  if (posix)
+    qsort (array, strvec_len (array), sizeof (char *), (QSFUNC *)strvec_posixcmp);
+  else
+    qsort (array, strvec_len (array), sizeof (char *), (QSFUNC *)strvec_strcmp);
+}
+
+/* Cons up a new array of words.  The words are taken from LIST,
+   which is a WORD_LIST *.  If ALLOC is true, everything is malloc'ed,
+   so you should free everything in this array when you are done.
+   The array is NULL terminated.  If IP is non-null, it gets the
+   number of words in the returned array.  STARTING_INDEX says where
+   to start filling in the returned array; it can be used to reserve
+   space at the beginning of the array. */
+
+char **
+strvec_from_word_list (list, alloc, starting_index, ip)
+     WORD_LIST *list;
+     int alloc, starting_index, *ip;
+{
+  int count;
+  char **array;
+
+  count = list_length (list);
+  array = (char **)xmalloc ((1 + count + starting_index) * sizeof (char *));
+
+  for (count = 0; count < starting_index; count++)
+    array[count] = (char *)NULL;
+  for (count = starting_index; list; count++, list = list->next)
+    array[count] = alloc ? savestring (list->word->word) : list->word->word;
+  array[count] = (char *)NULL;
+
+  if (ip)
+    *ip = count;
+  return (array);
+}
+
+/* Convert an array of strings into the form used internally by the shell.
+   ALLOC means to allocate new storage for each WORD_DESC in the returned
+   list rather than copy the values in ARRAY.  STARTING_INDEX says where
+   in ARRAY to begin. */
+
+WORD_LIST *
+strvec_to_word_list (array, alloc, starting_index)
+     char **array;
+     int alloc, starting_index;
+{
+  WORD_LIST *list;
+  WORD_DESC *w;
+  int i, count;
+
+  if (array == 0 || array[0] == 0)
+    return (WORD_LIST *)NULL;
+
+  for (count = 0; array[count]; count++)
+    ;
+
+  for (i = starting_index, list = (WORD_LIST *)NULL; i < count; i++)
+    {
+      w = make_bare_word (alloc ? array[i] : "");
+      if (alloc == 0)
+	{
+	  free (w->word);
+	  w->word = array[i];
+	}
+      list = make_word_list (w, list);
+    }
+  return (REVERSE_LIST (list, WORD_LIST *));
+}
diff --git a/lib/sh/strnlen.c b/lib/sh/strnlen.c
new file mode 100644
index 0000000..10414d3
--- /dev/null
+++ b/lib/sh/strnlen.c
@@ -0,0 +1,49 @@
+/* strnlen - return length of passed string, with length limit */
+
+/* Copyright (C) 2004 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+   
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#if !defined (HAVE_STRNLEN)
+
+#include <sys/types.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <stdc.h>
+
+/* Find the length of S, but scan at most MAXLEN characters.  If no '\0'
+   terminator is found within the first MAXLEN characters, return MAXLEN. */
+size_t
+strnlen (s, maxlen)
+     register const char *s;
+     size_t maxlen;
+{
+  register const char *e;
+  size_t n;
+
+  for (e = s, n = 0; *e && n < maxlen; e++, n++)
+    ;
+  return n;
+}
+#endif
diff --git a/lib/sh/strpbrk.c b/lib/sh/strpbrk.c
new file mode 100644
index 0000000..8cce830
--- /dev/null
+++ b/lib/sh/strpbrk.c
@@ -0,0 +1,49 @@
+/* strpbrk.c - locate multiple characters in a string */
+
+/* Copyright (C) 1991, 1994 Free Software Foundation, Inc.
+
+   NOTE: The canonical source of this file is maintained with the GNU C Library.
+   Bugs can be reported to bug-glibc@prep.ai.mit.edu.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#if !defined (HAVE_STRPBRK)
+
+#include <stdc.h>
+
+/* Find the first occurrence in S of any character in ACCEPT.  */
+char *
+strpbrk (s, accept)
+     register const char *s;
+     register const char *accept;
+{
+  while (*s != '\0')
+    {
+      const char *a = accept;
+      while (*a != '\0')
+	if (*a++ == *s)
+	  return (char *) s;
+      ++s;
+    }
+
+  return 0;
+}
+#endif
diff --git a/lib/sh/strstr.c b/lib/sh/strstr.c
new file mode 100644
index 0000000..c43b05e
--- /dev/null
+++ b/lib/sh/strstr.c
@@ -0,0 +1,125 @@
+/* strstr - find a substring within a string */
+
+/* Copyright (C) 1994, 1999 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * My personal strstr() implementation that beats most other algorithms.
+ * Until someone tells me otherwise, I assume that this is the
+ * fastest implementation of strstr() in C.
+ * I deliberately chose not to comment it.  You should have at least
+ * as much fun trying to understand it, as I had to write it :-).
+ *
+ * Stephen R. van den Berg, berg@pool.informatik.rwth-aachen.de	*/
+
+#if HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#if defined _LIBC || defined HAVE_STRING_H
+# include <string.h>
+#endif
+#include <sys/types.h>
+
+typedef unsigned chartype;
+
+#undef strstr
+
+char *
+strstr (const char *phaystack, const char *pneedle)
+{
+  register const unsigned char *haystack, *needle;
+  register chartype b, c;
+
+  haystack = (const unsigned char *) phaystack;
+  needle = (const unsigned char *) pneedle;
+
+  b = *needle;
+  if (b != '\0')
+    {
+      haystack--;				/* possible ANSI violation */
+      do
+	{
+	  c = *++haystack;
+	  if (c == '\0')
+	    goto ret0;
+	}
+      while (c != b);
+
+      c = *++needle;
+      if (c == '\0')
+	goto foundneedle;
+      ++needle;
+      goto jin;
+
+      for (;;)
+        {
+          register chartype a;
+	  register const unsigned char *rhaystack, *rneedle;
+
+	  do
+	    {
+	      a = *++haystack;
+	      if (a == '\0')
+		goto ret0;
+	      if (a == b)
+		break;
+	      a = *++haystack;
+	      if (a == '\0')
+		goto ret0;
+shloop:;    }
+          while (a != b);
+
+jin:	  a = *++haystack;
+	  if (a == '\0')
+	    goto ret0;
+
+	  if (a != c)
+	    goto shloop;
+
+	  rhaystack = haystack-- + 1;
+	  rneedle = needle;
+	  a = *rneedle;
+
+	  if (*rhaystack == a)
+	    do
+	      {
+		if (a == '\0')
+		  goto foundneedle;
+		++rhaystack;
+		a = *++needle;
+		if (*rhaystack != a)
+		  break;
+		if (a == '\0')
+		  goto foundneedle;
+		++rhaystack;
+		a = *++needle;
+	      }
+	    while (*rhaystack == a);
+
+	  needle = rneedle;		   /* took the register-poor approach */
+
+	  if (a == '\0')
+	    break;
+        }
+    }
+foundneedle:
+  return (char*) haystack;
+ret0:
+  return 0;
+}
diff --git a/lib/sh/strtod.c b/lib/sh/strtod.c
new file mode 100644
index 0000000..55e1154
--- /dev/null
+++ b/lib/sh/strtod.c
@@ -0,0 +1,207 @@
+/* strtod.c - convert string to double-precision floating-point value. */
+
+/* Copyright (C) 1991, 1992 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+   
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#ifndef HAVE_STRTOD
+
+#include <errno.h>
+#ifndef errno
+extern int errno;
+#endif
+
+#include <chartypes.h>
+#include <math.h>
+
+#if HAVE_FLOAT_H
+# include <float.h>
+#else
+# define DBL_MAX 1.7976931348623159e+308
+# define DBL_MIN 2.2250738585072010e-308
+#endif
+
+#include <bashansi.h>
+
+#ifndef NULL
+#  define NULL 0
+#endif
+
+#ifndef HUGE_VAL
+#  define HUGE_VAL HUGE
+#endif
+
+#ifndef locale_decpoint
+extern int locale_decpoint PARAMS((void));
+#endif
+
+/* Convert NPTR to a double.  If ENDPTR is not NULL, a pointer to the
+   character after the last one used in the number is put in *ENDPTR.  */
+double
+strtod (nptr, endptr)
+     const char *nptr;
+     char **endptr;
+{
+  register const char *s;
+  short sign;
+
+  /* The number so far.  */
+  double num;
+
+  int radixchar;
+  int got_dot;			/* Found a decimal point.  */
+  int got_digit;		/* Seen any digits.  */
+
+  /* The exponent of the number.  */
+  long int exponent;
+
+  if (nptr == NULL)
+    {
+      errno = EINVAL;
+      goto noconv;
+    }
+
+  s = nptr;
+
+  /* Eat whitespace.  */
+  while (ISSPACE ((unsigned char)*s))
+    ++s;
+
+  /* Get the sign.  */
+  sign = *s == '-' ? -1 : 1;
+  if (*s == '-' || *s == '+')
+    ++s;
+
+  radixchar = locale_decpoint ();
+  num = 0.0;
+  got_dot = 0;
+  got_digit = 0;
+  exponent = 0;
+  for (;; ++s)
+    {
+      if (DIGIT (*s))
+	{
+	  got_digit = 1;
+
+	  /* Make sure that multiplication by 10 will not overflow.  */
+	  if (num > DBL_MAX * 0.1)
+	    /* The value of the digit doesn't matter, since we have already
+	       gotten as many digits as can be represented in a `double'.
+	       This doesn't necessarily mean the result will overflow.
+	       The exponent may reduce it to within range.
+
+	       We just need to record that there was another
+	       digit so that we can multiply by 10 later.  */
+	    ++exponent;
+	  else
+	    num = (num * 10.0) + (*s - '0');
+
+	  /* Keep track of the number of digits after the decimal point.
+	     If we just divided by 10 here, we would lose precision.  */
+	  if (got_dot)
+	    --exponent;
+	}
+      else if (!got_dot && *s == radixchar)
+	/* Record that we have found the decimal point.  */
+	got_dot = 1;
+      else
+	/* Any other character terminates the number.  */
+	break;
+    }
+
+  if (!got_digit)
+    goto noconv;
+
+  if (TOLOWER ((unsigned char)*s) == 'e')
+    {
+      /* Get the exponent specified after the `e' or `E'.  */
+      int save = errno;
+      char *end;
+      long int exp;
+
+      errno = 0;
+      ++s;
+      exp = strtol (s, &end, 10);
+      if (errno == ERANGE)
+	{
+	  /* The exponent overflowed a `long int'.  It is probably a safe
+	     assumption that an exponent that cannot be represented by
+	     a `long int' exceeds the limits of a `double'.  */
+	  if (endptr != NULL)
+	    *endptr = end;
+	  if (exp < 0)
+	    goto underflow;
+	  else
+	    goto overflow;
+	}
+      else if (end == s)
+	/* There was no exponent.  Reset END to point to
+	   the 'e' or 'E', so *ENDPTR will be set there.  */
+	end = (char *) s - 1;
+      errno = save;
+      s = end;
+      exponent += exp;
+    }
+
+  if (endptr != NULL)
+    *endptr = (char *) s;
+
+  if (num == 0.0)
+    return 0.0;
+
+  /* Multiply NUM by 10 to the EXPONENT power,
+     checking for overflow and underflow.  */
+
+  if (exponent < 0)
+    {
+      if (num < DBL_MIN * pow (10.0, (double) -exponent))
+	goto underflow;
+    }
+  else if (exponent > 0)
+    {
+      if (num > DBL_MAX * pow (10.0, (double) -exponent))
+	goto overflow;
+    }
+
+  num *= pow (10.0, (double) exponent);
+
+  return num * sign;
+
+overflow:
+  /* Return an overflow error.  */
+  errno = ERANGE;
+  return HUGE_VAL * sign;
+
+underflow:
+  /* Return an underflow error.  */
+  if (endptr != NULL)
+    *endptr = (char *) nptr;
+  errno = ERANGE;
+  return 0.0;
+
+noconv:
+  /* There was no number.  */
+  if (endptr != NULL)
+    *endptr = (char *) nptr;
+  return 0.0;
+}
+
+#endif /* !HAVE_STRTOD */
diff --git a/lib/sh/strtoimax.c b/lib/sh/strtoimax.c
new file mode 100644
index 0000000..676e02e
--- /dev/null
+++ b/lib/sh/strtoimax.c
@@ -0,0 +1,113 @@
+/* strtoimax - convert string representation of a number into an intmax_t value. */
+
+/* Copyright 1999-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+   
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* Written by Paul Eggert.  Modified by Chet Ramey for Bash. */
+
+#if HAVE_CONFIG_H
+#  include <config.h>
+#endif
+
+#if HAVE_INTTYPES_H
+#  include <inttypes.h>
+#endif
+
+#if HAVE_STDINT_H
+#  include <stdint.h>
+#endif
+
+#if HAVE_STDLIB_H
+#  include <stdlib.h>
+#endif
+
+#include <stdc.h>
+
+/* Verify a requirement at compile-time (unlike assert, which is runtime).  */
+#define verify(name, assertion) struct name { char a[(assertion) ? 1 : -1]; }
+
+#ifndef HAVE_DECL_STRTOL
+"this configure-time declaration test was not run"
+#endif
+#if !HAVE_DECL_STRTOL
+extern long strtol PARAMS((const char *, char **, int));
+#endif
+
+#ifndef HAVE_DECL_STRTOLL
+"this configure-time declaration test was not run"
+#endif
+#if !HAVE_DECL_STRTOLL && HAVE_LONG_LONG
+extern long long strtoll PARAMS((const char *, char **, int));
+#endif
+
+#ifdef strtoimax
+#undef strtoimax
+#endif
+
+intmax_t
+strtoimax (ptr, endptr, base)
+     const char *ptr;
+     char **endptr;
+     int base;
+{
+#if HAVE_LONG_LONG
+  verify(size_is_that_of_long_or_long_long,
+	 (sizeof (intmax_t) == sizeof (long) ||
+	  sizeof (intmax_t) == sizeof (long long)));
+
+  if (sizeof (intmax_t) != sizeof (long))
+    return (strtoll (ptr, endptr, base));
+#else
+  verify (size_is_that_of_long, sizeof (intmax_t) == sizeof (long));
+#endif
+
+  return (strtol (ptr, endptr, base));
+}
+
+#ifdef TESTING
+# include <stdio.h>
+int
+main ()
+{
+  char *p, *endptr;
+  intmax_t x;
+#if HAVE_LONG_LONG
+  long long y;
+#endif
+  long z;
+  
+  printf ("sizeof intmax_t: %d\n", sizeof (intmax_t));
+
+#if HAVE_LONG_LONG
+  printf ("sizeof long long: %d\n", sizeof (long long));
+#endif
+  printf ("sizeof long: %d\n", sizeof (long));
+
+  x = strtoimax("42", &endptr, 10);
+#if HAVE_LONG_LONG
+  y = strtoll("42", &endptr, 10);
+#else
+  y = -1;
+#endif
+  z = strtol("42", &endptr, 10);
+
+  printf ("%lld %lld %ld\n", x, y, z);
+
+  exit (0);
+}
+#endif
diff --git a/lib/sh/strtol.c b/lib/sh/strtol.c
new file mode 100644
index 0000000..8aa7478
--- /dev/null
+++ b/lib/sh/strtol.c
@@ -0,0 +1,259 @@
+/* strtol - convert string representation of a number into a long integer value. */
+
+/* Copyright (C) 1991,92,94,95,96,97,98,99,2000,2001 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if !defined (HAVE_STRTOL)
+
+#include <chartypes.h>
+#include <errno.h>
+
+#ifndef errno
+extern int errno;
+#endif
+
+#ifndef __set_errno
+#  define __set_errno(Val) errno = (Val)
+#endif
+
+#ifdef HAVE_LIMITS_H
+#  include <limits.h>
+#endif
+
+#include <typemax.h>
+
+#include <stdc.h>
+#include <bashansi.h>
+
+#ifndef NULL
+#  define NULL 0
+#endif
+
+/* Nonzero if we are defining `strtoul' or `strtoull', operating on
+   unsigned integers.  */
+#ifndef UNSIGNED
+#  define UNSIGNED 0
+#  define INT LONG int
+#else
+#  define INT unsigned LONG int
+#endif
+
+#if UNSIGNED
+#  ifdef QUAD
+#    define strtol strtoull
+#  else
+#    define strtol strtoul
+#  endif
+#else
+#  ifdef QUAD
+#    define strtol strtoll
+#  endif
+#endif
+
+/* If QUAD is defined, we are defining `strtoll' or `strtoull',
+   operating on `long long ints.  */
+
+#ifdef QUAD
+#  define LONG long long
+#  define STRTOL_LONG_MIN LLONG_MIN
+#  define STRTOL_LONG_MAX LLONG_MAX
+#  define STRTOL_ULONG_MAX ULLONG_MAX
+#else	/* !QUAD */
+#  define LONG long
+#  define STRTOL_LONG_MIN LONG_MIN
+#  define STRTOL_LONG_MAX LONG_MAX
+#  define STRTOL_ULONG_MAX ULONG_MAX
+#endif
+
+/* Convert NPTR to an `unsigned long int' or `long int' in base BASE.
+   If BASE is 0 the base is determined by the presence of a leading
+   zero, indicating octal or a leading "0x" or "0X", indicating hexadecimal.
+   If BASE is < 2 or > 36, it is no longer reset to 10; EINVAL is returned.
+   If ENDPTR is not NULL, a pointer to the character after the last
+   one converted is stored in *ENDPTR.  */
+
+INT
+strtol (nptr, endptr, base)
+     const char *nptr;
+     char **endptr;
+     int base;
+{
+  int negative;
+  register unsigned LONG int cutoff;
+  register unsigned int cutlim;
+  register unsigned LONG int i;
+  register const char *s;
+  register unsigned char c;
+  const char *save, *end;
+  int overflow;
+
+  if (base < 0 || base == 1 || base > 36)
+    {
+      __set_errno (EINVAL);
+      return 0;
+    }
+
+  save = s = nptr;
+
+  /* Skip white space.  */
+  while (ISSPACE ((unsigned char)*s))
+    ++s;
+  if (*s == '\0')
+    goto noconv;
+
+  /* Check for a sign.  */
+  if (*s == '-' || *s == '+')
+    {
+      negative = (*s == '-');
+      ++s;
+    }
+  else
+    negative = 0;
+
+  /* Recognize number prefix and if BASE is zero, figure it out ourselves.  */
+  if (*s == '0')
+    {
+      if ((base == 0 || base == 16) && TOUPPER ((unsigned char) s[1]) == 'X')
+	{
+	  s += 2;
+	  base = 16;
+	}
+      else if (base == 0)
+	base = 8;
+    }
+  else if (base == 0)
+    base = 10;
+
+  /* Save the pointer so we can check later if anything happened.  */
+  save = s;
+
+  end = NULL;
+
+  cutoff = STRTOL_ULONG_MAX / (unsigned LONG int) base;
+  cutlim = STRTOL_ULONG_MAX % (unsigned LONG int) base;
+
+  overflow = 0;
+  i = 0;
+  c = *s;
+  if (sizeof (long int) != sizeof (LONG int))
+    {
+      unsigned long int j = 0;
+      unsigned long int jmax = ULONG_MAX / base;
+
+      for (;c != '\0'; c = *++s)
+	{
+	  if (s == end)
+	    break;
+	  if (DIGIT (c))
+	    c -= '0';
+	  else if (ISALPHA (c))
+	    c = TOUPPER (c) - 'A' + 10;
+	  else
+	    break;
+
+	  if ((int) c >= base)
+	    break;
+	  /* Note that we never can have an overflow.  */
+	  else if (j >= jmax)
+	    {
+	      /* We have an overflow.  Now use the long representation.  */
+	      i = (unsigned LONG int) j;
+	      goto use_long;
+	    }
+	  else
+	    j = j * (unsigned long int) base + c;
+	}
+
+      i = (unsigned LONG int) j;
+    }
+  else
+    for (;c != '\0'; c = *++s)
+      {
+	if (s == end)
+	  break;
+	if (DIGIT (c))
+	  c -= '0';
+	else if (ISALPHA (c))
+	  c = TOUPPER (c) - 'A' + 10;
+	else
+	  break;
+	if ((int) c >= base)
+	  break;
+	/* Check for overflow.  */
+	if (i > cutoff || (i == cutoff && c > cutlim))
+	  overflow = 1;
+	else
+	  {
+	  use_long:
+	    i *= (unsigned LONG int) base;
+	    i += c;
+	  }
+      }
+
+  /* Check if anything actually happened.  */
+  if (s == save)
+    goto noconv;
+
+  /* Store in ENDPTR the address of one character
+     past the last character we converted.  */
+  if (endptr != NULL)
+    *endptr = (char *) s;
+
+#if !UNSIGNED
+  /* Check for a value that is within the range of
+     `unsigned LONG int', but outside the range of `LONG int'.  */
+  if (overflow == 0
+      && i > (negative
+	      ? -((unsigned LONG int) (STRTOL_LONG_MIN + 1)) + 1
+	      : (unsigned LONG int) STRTOL_LONG_MAX))
+    overflow = 1;
+#endif
+
+  if (overflow)
+    {
+      __set_errno (ERANGE);
+#if UNSIGNED
+      return STRTOL_ULONG_MAX;
+#else
+      return negative ? STRTOL_LONG_MIN : STRTOL_LONG_MAX;
+#endif
+    }
+
+  /* Return the result of the appropriate sign.  */
+  return negative ? -i : i;
+
+noconv:
+  /* We must handle a special case here: the base is 0 or 16 and the
+     first two characters are '0' and 'x', but the rest are no
+     hexadecimal digits.  This is no error case.  We return 0 and
+     ENDPTR points to the `x`.  */
+  if (endptr != NULL)
+    {
+      if (save - nptr >= 2 && TOUPPER ((unsigned char) save[-1]) == 'X' && save[-2] == '0')
+	*endptr = (char *) &save[-1];
+      else
+	/*  There was no number to convert.  */
+	*endptr = (char *) nptr;
+    }
+
+  return 0L;
+}
+
+#endif /* !HAVE_STRTOL */
diff --git a/lib/sh/strtoll.c b/lib/sh/strtoll.c
new file mode 100644
index 0000000..f6060ee
--- /dev/null
+++ b/lib/sh/strtoll.c
@@ -0,0 +1,30 @@
+/* strtoll - convert string representation of a number into a long long value. */
+
+/* Copyright (C) 1997 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (HAVE_LONG_LONG) && !defined (HAVE_STRTOLL)
+
+#define QUAD		1
+#undef HAVE_STRTOL
+
+#include "strtol.c"
+
+#endif /* HAVE_LONG_LONG && !HAVE_STRTOLL */
diff --git a/lib/sh/strtoul.c b/lib/sh/strtoul.c
new file mode 100644
index 0000000..cbaa484
--- /dev/null
+++ b/lib/sh/strtoul.c
@@ -0,0 +1,30 @@
+/* strtoul - convert string representation of a number into an unsigned long value. */
+
+/* Copyright (C) 1997 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#ifndef HAVE_STRTOUL
+
+#define	UNSIGNED	1
+#undef HAVE_STRTOL
+
+#include <strtol.c>
+
+#endif /* !HAVE_STRTOUL */
diff --git a/lib/sh/strtoull.c b/lib/sh/strtoull.c
new file mode 100644
index 0000000..02ddebb
--- /dev/null
+++ b/lib/sh/strtoull.c
@@ -0,0 +1,31 @@
+/* strtoull - convert string representation of a number into an unsigned long long value. */
+
+/* Copyright (C) 1997 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (HAVE_LONG_LONG) && !defined (HAVE_STRTOULL)
+
+#define QUAD		1
+#define	UNSIGNED	1
+#undef HAVE_STRTOL
+
+#include "strtol.c"
+
+#endif /* HAVE_LONG_LONG && !HAVE_STRTOULL */
diff --git a/lib/sh/strtoumax.c b/lib/sh/strtoumax.c
new file mode 100644
index 0000000..0247e57
--- /dev/null
+++ b/lib/sh/strtoumax.c
@@ -0,0 +1,113 @@
+/* strtoumax - convert string representation of a number into an uintmax_t value. */
+
+/* Copyright 1999-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* Written by Paul Eggert.  Modified by Chet Ramey for Bash. */
+
+#if HAVE_CONFIG_H
+#  include <config.h>
+#endif
+
+#if HAVE_INTTYPES_H
+#  include <inttypes.h>
+#endif
+
+#if HAVE_STDINT_H
+#  include <stdint.h>
+#endif
+
+#if HAVE_STDLIB_H
+#  include <stdlib.h>
+#endif
+
+#include <stdc.h>
+
+/* Verify a requirement at compile-time (unlike assert, which is runtime).  */
+#define verify(name, assertion) struct name { char a[(assertion) ? 1 : -1]; }
+
+#ifndef HAVE_DECL_STRTOUL
+"this configure-time declaration test was not run"
+#endif
+#if !HAVE_DECL_STRTOUL
+extern unsigned long strtoul PARAMS((const char *, char **, int));
+#endif
+
+#ifndef HAVE_DECL_STRTOULL
+"this configure-time declaration test was not run"
+#endif
+#if !HAVE_DECL_STRTOULL && HAVE_UNSIGNED_LONG_LONG
+extern unsigned long long strtoull PARAMS((const char *, char **, int));
+#endif
+
+#ifdef strtoumax
+#undef strtoumax
+#endif
+
+uintmax_t
+strtoumax (ptr, endptr, base)
+     const char *ptr;
+     char **endptr;
+     int base;
+{
+#if HAVE_UNSIGNED_LONG_LONG
+  verify (size_is_that_of_unsigned_long_or_unsigned_long_long,
+	  (sizeof (uintmax_t) == sizeof (unsigned long) ||
+	   sizeof (uintmax_t) == sizeof (unsigned long long)));
+
+  if (sizeof (uintmax_t) != sizeof (unsigned long))
+    return (strtoull (ptr, endptr, base));
+#else
+  verify (size_is_that_of_unsigned_long, sizeof (uintmax_t) == sizeof (unsigned long));
+#endif
+
+  return (strtoul (ptr, endptr, base));
+}
+
+#ifdef TESTING
+# include <stdio.h>
+int
+main ()
+{
+  char *p, *endptr;
+  uintmax_t x;
+#if HAVE_UNSIGNED_LONG_LONG
+  unsigned long long y;
+#endif
+  unsigned long z;
+
+  printf ("sizeof uintmax_t: %d\n", sizeof (uintmax_t));
+
+#if HAVE_UNSIGNED_LONG_LONG
+  printf ("sizeof unsigned long long: %d\n", sizeof (unsigned long long));
+#endif
+  printf ("sizeof unsigned long: %d\n", sizeof (unsigned long));
+
+  x = strtoumax("42", &endptr, 10);
+#if HAVE_LONG_LONG
+  y = strtoull("42", &endptr, 10);
+#else
+  y = 0;
+#endif
+  z = strtoul("42", &endptr, 10);
+
+  printf ("%llu %llu %lu\n", x, y, z);
+
+  exit (0);
+}
+#endif
diff --git a/lib/sh/strtrans.c b/lib/sh/strtrans.c
new file mode 100644
index 0000000..b2b1acc
--- /dev/null
+++ b/lib/sh/strtrans.c
@@ -0,0 +1,400 @@
+/* strtrans.c - Translate and untranslate strings with ANSI-C escape sequences. */
+
+/* Copyright (C) 2000-2015 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <bashansi.h>
+#include <stdio.h>
+#include <chartypes.h>
+
+#include "shell.h"
+
+#include "shmbchar.h"
+#include "shmbutil.h"
+
+#ifdef ESC
+#undef ESC
+#endif
+#define ESC '\033'	/* ASCII */
+
+/* Convert STRING by expanding the escape sequences specified by the
+   ANSI C standard.  If SAWC is non-null, recognize `\c' and use that
+   as a string terminator.  If we see \c, set *SAWC to 1 before
+   returning.  LEN is the length of STRING.  If (FLAGS&1) is non-zero,
+   that we're translating a string for `echo -e', and therefore should not
+   treat a single quote as a character that may be escaped with a backslash.
+   If (FLAGS&2) is non-zero, we're expanding for the parser and want to
+   quote CTLESC and CTLNUL with CTLESC.  If (flags&4) is non-zero, we want
+   to remove the backslash before any unrecognized escape sequence. */
+char *
+ansicstr (string, len, flags, sawc, rlen)
+     char *string;
+     int len, flags, *sawc, *rlen;
+{
+  int c, temp;
+  char *ret, *r, *s;
+  unsigned long v;
+  size_t clen;
+  int b, mb_cur_max;
+#if defined (HANDLE_MULTIBYTE)
+  wchar_t wc;
+#endif
+
+  if (string == 0 || *string == '\0')
+    return ((char *)NULL);
+
+  mb_cur_max = MB_CUR_MAX;
+#if defined (HANDLE_MULTIBYTE)
+  temp = 4*len + 4;
+  if (temp < 12)
+    temp = 12;				/* ensure enough for eventual u32cesc */
+  ret = (char *)xmalloc (temp);
+#else
+  ret = (char *)xmalloc (2*len + 1);	/* 2*len for possible CTLESC */
+#endif
+  for (r = ret, s = string; s && *s; )
+    {
+      c = *s++;
+      if (c != '\\' || *s == '\0')
+	{
+	  clen = 1;
+#if defined (HANDLE_MULTIBYTE)
+	  if ((locale_utf8locale && (c & 0x80)) ||
+	      (locale_utf8locale == 0 && mb_cur_max > 0 && is_basic (c) == 0))
+	    {
+	      clen = mbrtowc (&wc, s - 1, mb_cur_max, 0);
+	      if (MB_INVALIDCH (clen))
+		clen = 1;
+	    }
+#endif
+	  *r++ = c;
+	  for (--clen; clen > 0; clen--)
+	    *r++ = *s++;
+	}
+      else
+	{
+	  switch (c = *s++)
+	    {
+#if defined (__STDC__)
+	    case 'a': c = '\a'; break;
+	    case 'v': c = '\v'; break;
+#else
+	    case 'a': c = (int) 0x07; break;
+	    case 'v': c = (int) 0x0B; break;
+#endif
+	    case 'b': c = '\b'; break;
+	    case 'e': case 'E':		/* ESC -- non-ANSI */
+	      c = ESC; break;
+	    case 'f': c = '\f'; break;
+	    case 'n': c = '\n'; break;
+	    case 'r': c = '\r'; break;
+	    case 't': c = '\t'; break;
+	    case '1': case '2': case '3':
+	    case '4': case '5': case '6':
+	    case '7':
+#if 1
+	      if (flags & 1)
+		{
+		  *r++ = '\\';
+		  break;
+		}
+	    /*FALLTHROUGH*/
+#endif
+	    case '0':
+	      /* If (FLAGS & 1), we're translating a string for echo -e (or
+		 the equivalent xpg_echo option), so we obey the SUSv3/
+		 POSIX-2001 requirement and accept 0-3 octal digits after
+		 a leading `0'. */
+	      temp = 2 + ((flags & 1) && (c == '0'));
+	      for (c -= '0'; ISOCTAL (*s) && temp--; s++)
+		c = (c * 8) + OCTVALUE (*s);
+	      c &= 0xFF;
+	      break;
+	    case 'x':			/* Hex digit -- non-ANSI */
+	      if ((flags & 2) && *s == '{')
+		{
+		  flags |= 16;		/* internal flag value */
+		  s++;
+		}
+	      /* Consume at least two hex characters */
+	      for (temp = 2, c = 0; ISXDIGIT ((unsigned char)*s) && temp--; s++)
+		c = (c * 16) + HEXVALUE (*s);
+	      /* DGK says that after a `\x{' ksh93 consumes ISXDIGIT chars
+		 until a non-xdigit or `}', so potentially more than two
+		 chars are consumed. */
+	      if (flags & 16)
+		{
+		  for ( ; ISXDIGIT ((unsigned char)*s); s++)
+		    c = (c * 16) + HEXVALUE (*s);
+		  flags &= ~16;
+		  if (*s == '}')
+		    s++;
+	        }
+	      /* \x followed by non-hex digits is passed through unchanged */
+	      else if (temp == 2)
+		{
+		  *r++ = '\\';
+		  c = 'x';
+		}
+	      c &= 0xFF;
+	      break;
+#if defined (HANDLE_MULTIBYTE)
+	    case 'u':
+	    case 'U':
+	      temp = (c == 'u') ? 4 : 8;	/* \uNNNN \UNNNNNNNN */
+	      for (v = 0; ISXDIGIT ((unsigned char)*s) && temp--; s++)
+		v = (v * 16) + HEXVALUE (*s);
+	      if (temp == ((c == 'u') ? 4 : 8))
+		{
+		  *r++ = '\\';	/* c remains unchanged */
+		  break;
+		}
+	      else if (v <= 0x7f)	/* <= 0x7f translates directly */
+		{
+		  c = v;
+		  break;
+		}
+	      else
+		{
+		  temp = u32cconv (v, r);
+		  r += temp;
+		  continue;
+		}
+#endif
+	    case '\\':
+	      break;
+	    case '\'': case '"': case '?':
+	      if (flags & 1)
+		*r++ = '\\';
+	      break;
+	    case 'c':
+	      if (sawc)
+		{
+		  *sawc = 1;
+		  *r = '\0';
+		  if (rlen)
+		    *rlen = r - ret;
+		  return ret;
+		}
+	      else if ((flags & 1) == 0 && *s == 0)
+		;		/* pass \c through */
+	      else if ((flags & 1) == 0 && (c = *s))
+		{
+		  s++;
+		  if ((flags & 2) && c == '\\' && c == *s)
+		    s++;	/* Posix requires $'\c\\' do backslash escaping */
+		  c = TOCTRL(c);
+		  break;
+		}
+		/*FALLTHROUGH*/
+	    default:
+		if ((flags & 4) == 0)
+		  *r++ = '\\';
+		break;
+	    }
+	  if ((flags & 2) && (c == CTLESC || c == CTLNUL))
+	    *r++ = CTLESC;
+	  *r++ = c;
+	}
+    }
+  *r = '\0';
+  if (rlen)
+    *rlen = r - ret;
+  return ret;
+}
+
+/* Take a string STR, possibly containing non-printing characters, and turn it
+   into a $'...' ANSI-C style quoted string.  Returns a new string. */
+char *
+ansic_quote (str, flags, rlen)
+     char *str;
+     int flags, *rlen;
+{
+  char *r, *ret, *s;
+  int l, rsize;
+  unsigned char c;
+  size_t clen;
+  int b;
+#if defined (HANDLE_MULTIBYTE)
+  wchar_t wc;
+#endif
+
+  if (str == 0 || *str == 0)
+    return ((char *)0);
+
+  l = strlen (str);
+  rsize = 4 * l + 4;
+  r = ret = (char *)xmalloc (rsize);
+
+  *r++ = '$';
+  *r++ = '\'';
+
+  for (s = str; c = *s; s++)
+    {
+      b = l = 1;		/* 1 == add backslash; 0 == no backslash */
+      clen = 1;
+
+      switch (c)
+	{
+	case ESC: c = 'E'; break;
+#ifdef __STDC__
+	case '\a': c = 'a'; break;
+	case '\v': c = 'v'; break;
+#else
+	case 0x07: c = 'a'; break;
+	case 0x0b: c = 'v'; break;
+#endif
+
+	case '\b': c = 'b'; break;
+	case '\f': c = 'f'; break;
+	case '\n': c = 'n'; break;
+	case '\r': c = 'r'; break;
+	case '\t': c = 't'; break;
+	case '\\':
+	case '\'':
+	  break;
+	default:
+#if defined (HANDLE_MULTIBYTE)
+	  b = is_basic (c);
+	  /* XXX - clen comparison to 0 is dicey */
+	  if ((b == 0 && ((clen = mbrtowc (&wc, s, MB_CUR_MAX, 0)) < 0 || MB_INVALIDCH (clen) || iswprint (wc) == 0)) ||
+	      (b == 1 && ISPRINT (c) == 0))
+#else
+	  if (ISPRINT (c) == 0)
+#endif
+	    {
+	      *r++ = '\\';
+	      *r++ = TOCHAR ((c >> 6) & 07);
+	      *r++ = TOCHAR ((c >> 3) & 07);
+	      *r++ = TOCHAR (c & 07);
+	      continue;
+	    }
+	  l = 0;
+	  break;
+	}
+      if (b == 0 && clen == 0)
+	break;
+
+      if (l)
+	*r++ = '\\';
+
+      if (clen == 1)
+	*r++ = c;
+      else
+	{
+	  for (b = 0; b < (int)clen; b++)
+	    *r++ = (unsigned char)s[b];
+	  s += clen - 1;	/* -1 because of the increment above */
+	}
+    }
+
+  *r++ = '\'';
+  *r = '\0';
+  if (rlen)
+    *rlen = r - ret;
+  return ret;
+}
+
+#if defined (HANDLE_MULTIBYTE)
+int
+ansic_wshouldquote (string)
+     const char *string;
+{
+  const wchar_t *wcs;
+  wchar_t wcc;
+  wchar_t *wcstr = NULL;
+  size_t slen;
+
+  slen = mbstowcs (wcstr, string, 0);
+
+  if (slen == (size_t)-1)
+    return 1;
+
+  wcstr = (wchar_t *)xmalloc (sizeof (wchar_t) * (slen + 1));
+  mbstowcs (wcstr, string, slen + 1);
+
+  for (wcs = wcstr; wcc = *wcs; wcs++)
+    if (iswprint(wcc) == 0)
+      {
+	free (wcstr);
+	return 1;
+      }
+
+  free (wcstr);
+  return 0;
+}
+#endif
+
+/* return 1 if we need to quote with $'...' because of non-printing chars. */
+int
+ansic_shouldquote (string)
+     const char *string;
+{
+  const char *s;
+  unsigned char c;
+
+  if (string == 0)
+    return 0;
+
+  for (s = string; c = *s; s++)
+    {
+#if defined (HANDLE_MULTIBYTE)
+      if (is_basic (c) == 0)
+	return (ansic_wshouldquote (s));
+#endif
+      if (ISPRINT (c) == 0)
+	return 1;
+    }
+
+  return 0;
+}
+
+/* $'...' ANSI-C expand the portion of STRING between START and END and
+   return the result.  The result cannot be longer than the input string. */
+char *
+ansiexpand (string, start, end, lenp)
+     char *string;
+     int start, end, *lenp;
+{
+  char *temp, *t;
+  int len, tlen;
+
+  temp = (char *)xmalloc (end - start + 1);
+  for (tlen = 0, len = start; len < end; )
+    temp[tlen++] = string[len++];
+  temp[tlen] = '\0';
+
+  if (*temp)
+    {
+      t = ansicstr (temp, tlen, 2, (int *)NULL, lenp);
+      free (temp);
+      return (t);
+    }
+  else
+    {
+      if (lenp)
+	*lenp = 0;
+      return (temp);
+    }
+}
diff --git a/lib/sh/times.c b/lib/sh/times.c
new file mode 100644
index 0000000..2423078
--- /dev/null
+++ b/lib/sh/times.c
@@ -0,0 +1,77 @@
+/* times.c - times(3) library function */
+
+/* Copyright (C) 1999-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if !defined (HAVE_TIMES)
+
+#include <sys/types.h>
+#include <posixtime.h>
+#include <systimes.h>
+
+#if defined (HAVE_SYS_RESOURCE_H) && defined (HAVE_GETRUSAGE)
+#  include <sys/resource.h>
+#endif /* HAVE_SYS_RESOURCE_H && HAVE_GETRUSAGE */
+
+extern long	get_clk_tck PARAMS((void));
+
+#define CONVTCK(r)      (r.tv_sec * clk_tck + r.tv_usec / (1000000 / clk_tck))
+
+clock_t
+times(tms)
+	struct tms *tms;
+{
+	clock_t rv;
+	static long clk_tck = -1;
+
+#if defined (HAVE_GETRUSAGE)
+	struct timeval tv;
+	struct rusage ru;
+
+	if (clk_tck == -1)
+		clk_tck = get_clk_tck();
+
+	if (getrusage(RUSAGE_SELF, &ru) < 0)
+		return ((clock_t)-1);
+	tms->tms_utime = CONVTCK(ru.ru_utime);
+	tms->tms_stime = CONVTCK(ru.ru_stime);
+
+	if (getrusage(RUSAGE_CHILDREN, &ru) < 0)
+		return ((clock_t)-1);
+	tms->tms_cutime = CONVTCK(ru.ru_utime);
+	tms->tms_cstime = CONVTCK(ru.ru_stime);
+
+	if (gettimeofday(&tv, NULL) < 0)
+		return ((clock_t)-1);
+	rv = (clock_t)(CONVTCK(tv));
+#else /* !HAVE_GETRUSAGE */
+	if (clk_tck == -1)
+		clk_tck = get_clk_tck();
+
+	/* We can't do anything. */
+	tms->tms_utime = tms->tms_stime = (clock_t)0;
+	tms->tms_cutime = tms->tms_cstime = (clock_t)0;
+
+	rv = (clock_t)time((time_t *)0) * clk_tck;
+# endif /* HAVE_GETRUSAGE */
+
+	return rv;
+}
+#endif /* !HAVE_TIMES */
diff --git a/lib/sh/timeval.c b/lib/sh/timeval.c
new file mode 100644
index 0000000..f2ca762
--- /dev/null
+++ b/lib/sh/timeval.c
@@ -0,0 +1,179 @@
+/* timeval.c - functions to perform operations on struct timevals */
+
+/* Copyright (C) 1999 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (HAVE_TIMEVAL)
+
+#include <sys/types.h>
+#include <posixtime.h>
+
+#include <bashintl.h>
+#include <stdc.h>
+
+#ifndef locale_decpoint
+extern int locale_decpoint PARAMS((void));
+#endif
+
+#include <stdio.h>
+
+struct timeval *
+difftimeval (d, t1, t2)
+     struct timeval *d, *t1, *t2;
+{
+  d->tv_sec = t2->tv_sec - t1->tv_sec;
+  d->tv_usec = t2->tv_usec - t1->tv_usec;
+  if (d->tv_usec < 0)
+    {
+      d->tv_usec += 1000000;
+      d->tv_sec -= 1;
+      if (d->tv_sec < 0)		/* ??? -- BSD/OS does this */
+	{
+	  d->tv_sec = 0;
+	  d->tv_usec = 0;
+	}
+    }
+  return d;
+}
+
+struct timeval *
+addtimeval (d, t1, t2)
+     struct timeval *d, *t1, *t2;
+{
+  d->tv_sec = t1->tv_sec + t2->tv_sec;
+  d->tv_usec = t1->tv_usec + t2->tv_usec;
+  if (d->tv_usec >= 1000000)
+    {
+      d->tv_usec -= 1000000;
+      d->tv_sec += 1;
+    }
+  return d;
+}
+
+struct timeval *
+multimeval (d, m)
+     struct timeval *d;
+     int m;
+{
+  time_t t;
+
+  t = d->tv_usec * m;
+  d->tv_sec = d->tv_sec * m + t / 1000000;
+  d->tv_usec = t % 1000000;
+  return d;
+}
+
+struct timeval *
+divtimeval (d, m)
+     struct timeval *d;
+     int m;
+{
+  time_t t;
+
+  t = d->tv_sec;
+  d->tv_sec = t / m;
+  d->tv_usec = (d->tv_usec + 1000000 * (t % m)) / m;
+  return d;
+}
+  
+/* Do "cpu = ((user + sys) * 10000) / real;" with timevals.
+   Barely-tested code from Deven T. Corzine <deven@ties.org>. */
+int
+timeval_to_cpu (rt, ut, st)
+     struct timeval *rt, *ut, *st;	/* real, user, sys */
+{
+  struct timeval t1, t2;
+  register int i;
+
+  addtimeval (&t1, ut, st);
+  t2.tv_sec = rt->tv_sec;
+  t2.tv_usec = rt->tv_usec;
+
+  for (i = 0; i < 6; i++)
+    {
+      if ((t1.tv_sec > 99999999) || (t2.tv_sec > 99999999))
+	break;
+      t1.tv_sec *= 10;
+      t1.tv_sec += t1.tv_usec / 100000;
+      t1.tv_usec *= 10;
+      t1.tv_usec %= 1000000;
+      t2.tv_sec *= 10;
+      t2.tv_sec += t2.tv_usec / 100000;
+      t2.tv_usec *= 10;
+      t2.tv_usec %= 1000000;
+    }
+  for (i = 0; i < 4; i++)
+    {
+      if (t1.tv_sec < 100000000)
+	t1.tv_sec *= 10;
+      else
+	t2.tv_sec /= 10;
+    }
+
+  return ((t2.tv_sec == 0) ? 0 : t1.tv_sec / t2.tv_sec);
+}  
+
+/* Convert a pointer to a struct timeval to seconds and thousandths of a
+   second, returning the values in *SP and *SFP, respectively.  This does
+   rounding on the fractional part, not just truncation to three places. */
+void
+timeval_to_secs (tvp, sp, sfp)
+     struct timeval *tvp;
+     time_t *sp;
+     int *sfp;
+{
+  int rest;
+
+  *sp = tvp->tv_sec;
+
+  *sfp = tvp->tv_usec % 1000000;	/* pretty much a no-op */
+  rest = *sfp % 1000;
+  *sfp = (*sfp * 1000) / 1000000;
+  if (rest >= 500)
+    *sfp += 1;
+
+  /* Sanity check */
+  if (*sfp >= 1000)
+    {
+      *sp += 1;
+      *sfp -= 1000;
+    }
+}
+  
+/* Print the contents of a struct timeval * in a standard way to stdio
+   stream FP.  */
+void
+print_timeval (fp, tvp)
+     FILE *fp;
+     struct timeval *tvp;
+{
+  time_t timestamp;
+  long minutes;
+  int seconds, seconds_fraction;
+
+  timeval_to_secs (tvp, &timestamp, &seconds_fraction);
+
+  minutes = timestamp / 60;
+  seconds = timestamp % 60;
+
+  fprintf (fp, "%ldm%d%c%03ds",  minutes, seconds, locale_decpoint (), seconds_fraction);
+}
+
+#endif /* HAVE_TIMEVAL */
diff --git a/lib/sh/tmpfile.c b/lib/sh/tmpfile.c
new file mode 100644
index 0000000..ef8b067
--- /dev/null
+++ b/lib/sh/tmpfile.c
@@ -0,0 +1,311 @@
+/*
+ * tmpfile.c - functions to create and safely open temp files for the shell.
+ */
+
+/* Copyright (C) 2000-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#include <bashtypes.h>
+#include <posixstat.h>
+#include <posixtime.h>
+#include <filecntl.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <bashansi.h>
+
+#include <stdio.h>
+#include <errno.h>
+
+#include <shell.h>
+
+#ifndef errno
+extern int errno;
+#endif
+
+#define BASEOPENFLAGS	(O_CREAT | O_TRUNC | O_EXCL | O_BINARY)
+
+#define DEFAULT_TMPDIR		"."	/* bogus default, should be changed */
+#define DEFAULT_NAMEROOT	"shtmp"
+
+/* Use ANSI-C rand() interface if random(3) is not available */
+#if !HAVE_RANDOM
+#define random() rand()
+#endif
+
+extern pid_t dollar_dollar_pid;
+
+static char *get_sys_tmpdir PARAMS((void));
+static char *get_tmpdir PARAMS((int));
+
+static char *sys_tmpdir = (char *)NULL;
+static int ntmpfiles;
+static int tmpnamelen = -1;
+static unsigned long filenum = 1L;
+
+static char *
+get_sys_tmpdir ()
+{
+  if (sys_tmpdir)
+    return sys_tmpdir;
+
+#ifdef P_tmpdir
+  sys_tmpdir = P_tmpdir;
+  if (file_iswdir (sys_tmpdir))
+    return sys_tmpdir;
+#endif
+
+  sys_tmpdir = "/tmp";
+  if (file_iswdir (sys_tmpdir))
+    return sys_tmpdir;
+
+  sys_tmpdir = "/var/tmp";
+  if (file_iswdir (sys_tmpdir))
+    return sys_tmpdir;
+
+  sys_tmpdir = "/usr/tmp";
+  if (file_iswdir (sys_tmpdir))
+    return sys_tmpdir;
+
+  sys_tmpdir = DEFAULT_TMPDIR;
+
+  return sys_tmpdir;
+}
+
+static char *
+get_tmpdir (flags)
+     int flags;
+{
+  char *tdir;
+
+  tdir = (flags & MT_USETMPDIR) ? get_string_value ("TMPDIR") : (char *)NULL;
+  if (tdir && (file_iswdir (tdir) == 0 || strlen (tdir) > PATH_MAX))
+    tdir = 0;
+
+  if (tdir == 0)
+    tdir = get_sys_tmpdir ();
+
+#if defined (HAVE_PATHCONF) && defined (_PC_NAME_MAX)
+  if (tmpnamelen == -1)
+    tmpnamelen = pathconf (tdir, _PC_NAME_MAX);
+#else
+  tmpnamelen = 0;
+#endif
+
+  return tdir;
+}
+
+static void
+sh_seedrand ()
+{
+#if HAVE_RANDOM
+  int d;
+  static int seeded = 0;
+  if (seeded == 0)
+    {
+      struct timeval tv;
+  	      
+      gettimeofday (&tv, NULL);
+      srandom (tv.tv_sec ^ tv.tv_usec ^ (getpid () << 16) ^ (uintptr_t)&d);
+      seeded = 1;
+    }
+#endif
+}
+
+char *
+sh_mktmpname (nameroot, flags)
+     char *nameroot;
+     int flags;
+{
+  char *filename, *tdir, *lroot;
+  struct stat sb;
+  int r, tdlen;
+  static int seeded = 0;
+
+  filename = (char *)xmalloc (PATH_MAX + 1);
+  tdir = get_tmpdir (flags);
+  tdlen = strlen (tdir);
+
+  lroot = nameroot ? nameroot : DEFAULT_NAMEROOT;
+  if (nameroot == 0)
+    flags &= ~MT_TEMPLATE;
+
+  if ((flags & MT_TEMPLATE) && strlen (nameroot) > PATH_MAX)
+    flags &= ~MT_TEMPLATE;
+
+#ifdef USE_MKTEMP
+  if (flags & MT_TEMPLATE)
+    strcpy (filename, nameroot);
+  else
+    sprintf (filename, "%s/%s.XXXXXX", tdir, lroot);
+  if (mktemp (filename) == 0)
+    {
+      free (filename);
+      filename = NULL;
+    }
+#else  /* !USE_MKTEMP */
+  sh_seedrand ();
+  while (1)
+    {
+      filenum = (filenum << 1) ^
+		(unsigned long) time ((time_t *)0) ^
+		(unsigned long) dollar_dollar_pid ^
+		(unsigned long) ((flags & MT_USERANDOM) ? random () : ntmpfiles++);
+      sprintf (filename, "%s/%s-%lu", tdir, lroot, filenum);
+      if (tmpnamelen > 0 && tmpnamelen < 32)
+	filename[tdlen + 1 + tmpnamelen] = '\0';
+#  ifdef HAVE_LSTAT
+      r = lstat (filename, &sb);
+#  else
+      r = stat (filename, &sb);
+#  endif
+      if (r < 0 && errno == ENOENT)
+	break;
+    }
+#endif /* !USE_MKTEMP */
+
+  return filename;
+}
+
+int
+sh_mktmpfd (nameroot, flags, namep)
+     char *nameroot;
+     int flags;
+     char **namep;
+{
+  char *filename, *tdir, *lroot;
+  int fd, tdlen;
+  
+  filename = (char *)xmalloc (PATH_MAX + 1);
+  tdir = get_tmpdir (flags);
+  tdlen = strlen (tdir);
+
+  lroot = nameroot ? nameroot : DEFAULT_NAMEROOT;
+  if (nameroot == 0)
+    flags &= ~MT_TEMPLATE;
+
+  if ((flags & MT_TEMPLATE) && strlen (nameroot) > PATH_MAX)
+    flags &= ~MT_TEMPLATE;
+
+#ifdef USE_MKSTEMP
+  if (flags & MT_TEMPLATE)
+    strcpy (filename, nameroot);
+  else
+    sprintf (filename, "%s/%s.XXXXXX", tdir, lroot);
+  fd = mkstemp (filename);
+  if (fd < 0 || namep == 0)
+    {
+      free (filename);
+      filename = NULL;
+    }
+  if (namep)
+    *namep = filename;
+  return fd;
+#else /* !USE_MKSTEMP */
+  sh_seedrand ();
+  do
+    {
+      filenum = (filenum << 1) ^
+		(unsigned long) time ((time_t *)0) ^
+		(unsigned long) dollar_dollar_pid ^
+		(unsigned long) ((flags & MT_USERANDOM) ? random () : ntmpfiles++);
+      sprintf (filename, "%s/%s-%lu", tdir, lroot, filenum);
+      if (tmpnamelen > 0 && tmpnamelen < 32)
+	filename[tdlen + 1 + tmpnamelen] = '\0';
+      fd = open (filename, BASEOPENFLAGS | ((flags & MT_READWRITE) ? O_RDWR : O_WRONLY), 0600);
+    }
+  while (fd < 0 && errno == EEXIST);
+
+  if (namep)
+    *namep = filename;
+  else
+    free (filename);
+
+  return fd;
+#endif /* !USE_MKSTEMP */
+}
+
+FILE *
+sh_mktmpfp (nameroot, flags, namep)
+     char *nameroot;
+     int flags;
+     char **namep;
+{
+  int fd;
+  FILE *fp;
+
+  fd = sh_mktmpfd (nameroot, flags, namep);
+  if (fd < 0)
+    return ((FILE *)NULL);
+  fp = fdopen (fd, (flags & MT_READWRITE) ? "w+" : "w");
+  if (fp == 0)
+    close (fd);
+  return fp;
+}
+
+char *
+sh_mktmpdir (nameroot, flags)
+     char *nameroot;
+     int flags;
+{
+  char *filename, *tdir, *lroot, *dirname;
+  int fd, tdlen;
+  
+#ifdef USE_MKDTEMP
+  filename = (char *)xmalloc (PATH_MAX + 1);
+  tdir = get_tmpdir (flags);
+  tdlen = strlen (tdir);
+
+  lroot = nameroot ? nameroot : DEFAULT_NAMEROOT;
+  if (nameroot == 0)
+    flags &= ~MT_TEMPLATE;
+
+  if ((flags & MT_TEMPLATE) && strlen (nameroot) > PATH_MAX)
+    flags &= ~MT_TEMPLATE;
+
+  if (flags & MT_TEMPLATE)
+    strcpy (filename, nameroot);
+  else
+    sprintf (filename, "%s/%s.XXXXXX", tdir, lroot);
+  dirname = mkdtemp (filename);
+  if (dirname == 0)
+    {
+      free (filename);
+      filename = NULL;
+    }
+  return dirname;
+#else /* !USE_MKDTEMP */
+  filename = (char *)NULL;
+  do
+    {
+      filename = sh_mktmpname (nameroot, flags);
+      fd = mkdir (filename, 0700);
+      if (fd == 0)
+	break;
+      free (filename);
+      filename = (char *)NULL;
+    }
+  while (fd < 0 && errno == EEXIST);
+
+  return (filename);
+#endif /* !USE_MKDTEMP */
+}
diff --git a/lib/sh/uconvert.c b/lib/sh/uconvert.c
new file mode 100644
index 0000000..457552e
--- /dev/null
+++ b/lib/sh/uconvert.c
@@ -0,0 +1,124 @@
+/* uconvert - convert string representations of decimal numbers into whole
+	      number/fractional value pairs. */
+
+/* Copyright (C) 2008,2009,2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include "bashtypes.h"
+
+#include "posixtime.h"
+
+#if defined (HAVE_UNISTD_H)
+#include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include "chartypes.h"
+
+#include "shell.h"
+#include "builtins.h"
+
+#define DECIMAL	'.'		/* XXX - should use locale */
+
+#define RETURN(x) \
+do { \
+  if (ip) *ip = ipart * mult; \
+  if (up) *up = upart; \
+  if (ep) *ep = p; \
+  return (x); \
+} while (0)
+
+/*
+ * An incredibly simplistic floating point converter.
+ */
+static int multiplier[7] = { 1, 100000, 10000, 1000, 100, 10, 1 };
+
+/* Take a decimal number int-part[.[micro-part]] and convert it to the whole
+   and fractional portions.  The fractional portion is returned in
+   millionths (micro); callers are responsible for multiplying appropriately.
+   EP, if non-null, gets the address of the character where conversion stops.
+   Return 1 if value converted; 0 if invalid integer for either whole or
+   fractional parts. */
+int
+uconvert(s, ip, up, ep)
+     char *s;
+     long *ip, *up;
+     char **ep;
+{
+  int n, mult;
+  long ipart, upart;
+  char *p;
+
+  ipart = upart = 0;
+  mult = 1;
+
+  if (s && (*s == '-' || *s == '+'))
+    {
+      mult = (*s == '-') ? -1 : 1;
+      p = s + 1;
+    }
+  else
+    p = s;
+
+  for ( ; p && *p; p++)
+    {
+      if (*p == DECIMAL)		/* decimal point */
+	break;
+      if (DIGIT(*p) == 0)
+	RETURN(0);
+      ipart = (ipart * 10) + (*p - '0');
+    }
+
+  if (p == 0 || *p == 0)	/* callers ensure p can never be 0; this is to shut up clang */
+    RETURN(1);
+
+  if (*p == DECIMAL)
+    p++;
+
+  /* Look for up to six digits past a decimal point. */
+  for (n = 0; n < 6 && p[n]; n++)
+    {
+      if (DIGIT(p[n]) == 0)
+	{
+	  if (ep)
+	    {
+	      upart *= multiplier[n];
+	      p += n;		/* To set EP */
+	    }
+	  RETURN(0);
+	}
+      upart = (upart * 10) + (p[n] - '0');
+    }
+
+  /* Now convert to millionths */
+  upart *= multiplier[n];
+
+  if (n == 6 && p[6] >= '5' && p[6] <= '9')
+    upart++;			/* round up 1 */
+
+  if (ep)
+    {
+      p += n;
+      while (DIGIT(*p))
+	p++;
+    }
+
+  RETURN(1);
+}
diff --git a/lib/sh/ufuncs.c b/lib/sh/ufuncs.c
new file mode 100644
index 0000000..4dc4853
--- /dev/null
+++ b/lib/sh/ufuncs.c
@@ -0,0 +1,140 @@
+/* ufuncs - sleep and alarm functions that understand fractional values */
+
+/* Copyright (C) 2008,2009-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include "bashtypes.h"
+
+#include "posixtime.h"
+
+#if defined (HAVE_UNISTD_H)
+#include <unistd.h>
+#endif
+
+#include <errno.h>
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+#if defined (HAVE_SELECT)
+#  include "posixselect.h"
+#  include "quit.h"
+#  include "trap.h"
+#  include "stat-time.h"
+#endif
+
+/* A version of `alarm' using setitimer if it's available. */
+
+#if defined (HAVE_SETITIMER)
+unsigned int
+falarm(secs, usecs)
+     unsigned int secs, usecs;
+{
+  struct itimerval it, oit;
+
+  it.it_interval.tv_sec = 0;
+  it.it_interval.tv_usec = 0;
+
+  it.it_value.tv_sec = secs;
+  it.it_value.tv_usec = usecs;
+
+  if (setitimer(ITIMER_REAL, &it, &oit) < 0)
+    return (-1);		/* XXX will be converted to unsigned */
+
+  /* Backwards compatibility with alarm(3) */
+  if (oit.it_value.tv_usec)
+    oit.it_value.tv_sec++;
+  return (oit.it_value.tv_sec);
+}
+#else
+int
+falarm (secs, usecs)
+     unsigned int secs, usecs;
+{
+  if (secs == 0 && usecs == 0)
+    return (alarm (0));
+
+  if (secs == 0 || usecs >= 500000)
+    {
+      secs++;
+      usecs = 0;
+    }
+  return (alarm (secs));
+}
+#endif /* !HAVE_SETITIMER */
+
+/* A version of sleep using fractional seconds and select.  I'd like to use
+   `usleep', but it's already taken */
+
+#if defined (HAVE_TIMEVAL) && (defined (HAVE_SELECT) || defined (HAVE_PSELECT))
+int
+fsleep(sec, usec)
+     unsigned int sec, usec;
+{
+  int e, r;
+  sigset_t blocked_sigs, prevmask;
+#if defined (HAVE_PSELECT)
+  struct timespec ts;
+#else
+  struct timeval tv;
+#endif
+
+  sigemptyset (&blocked_sigs);
+#  if defined (SIGCHLD)
+  sigaddset (&blocked_sigs, SIGCHLD);
+#  endif
+
+#if defined (HAVE_PSELECT)
+  ts.tv_sec = sec;
+  ts.tv_nsec = usec * 1000;
+#else
+  sigemptyset (&prevmask);
+  tv.tv_sec = sec;
+  tv.tv_usec = usec;
+#endif /* !HAVE_PSELECT */
+
+  do
+    {
+#if defined (HAVE_PSELECT)
+      r = pselect(0, (fd_set *)0, (fd_set *)0, (fd_set *)0, &ts, &blocked_sigs);
+#else
+      sigprocmask (SIG_SETMASK, &blocked_sigs, &prevmask);
+      r = select(0, (fd_set *)0, (fd_set *)0, (fd_set *)0, &tv);
+      sigprocmask (SIG_SETMASK, &prevmask, NULL);
+#endif
+      e = errno;
+      if (r < 0 && errno == EINTR)
+	return -1;		/* caller will handle */
+      errno = e;
+    }
+  while (r < 0 && errno == EINTR);
+
+  return r;
+}
+#else /* !HAVE_TIMEVAL || !HAVE_SELECT */
+int
+fsleep(sec, usec)
+     long sec, usec;
+{
+  if (usec >= 500000)	/* round */
+   sec++;
+  return (sleep(sec));
+}
+#endif /* !HAVE_TIMEVAL || !HAVE_SELECT */
diff --git a/lib/sh/unicode.c b/lib/sh/unicode.c
new file mode 100644
index 0000000..d95d1e2
--- /dev/null
+++ b/lib/sh/unicode.c
@@ -0,0 +1,339 @@
+/* unicode.c - functions to convert unicode characters */
+
+/* Copyright (C) 2010-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (HANDLE_MULTIBYTE)
+
+#include <stdc.h>
+#include <wchar.h>
+#include <bashansi.h>
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#include <stdio.h>
+#include <limits.h>
+
+#if HAVE_ICONV
+#  include <iconv.h>
+#endif
+
+#include <xmalloc.h>
+
+#ifndef USHORT_MAX
+#  ifdef USHRT_MAX
+#    define USHORT_MAX USHRT_MAX
+#  else
+#    define USHORT_MAX ((unsigned short) ~(unsigned short)0)
+#  endif
+#endif
+
+#if !defined (STREQ)
+#  define STREQ(a, b) ((a)[0] == (b)[0] && strcmp ((a), (b)) == 0)
+#endif /* !STREQ */
+
+#if defined (HAVE_LOCALE_CHARSET)
+extern const char *locale_charset PARAMS((void));
+#else
+extern char *get_locale_var PARAMS((char *));
+#endif
+
+extern int locale_utf8locale;
+
+static int u32init = 0;
+static int utf8locale = 0;
+#if defined (HAVE_ICONV)
+static iconv_t localconv;
+#endif
+
+#ifndef HAVE_LOCALE_CHARSET
+static char charsetbuf[40];
+
+static char *
+stub_charset ()
+{
+  char *locale, *s, *t;
+
+  locale = get_locale_var ("LC_CTYPE");
+  if (locale == 0 || *locale == 0)
+    {
+      strcpy (charsetbuf, "ASCII");
+      return charsetbuf;
+    }
+  s = strrchr (locale, '.');
+  if (s)
+    {
+      strncpy (charsetbuf, s+1, sizeof (charsetbuf) - 1);
+      charsetbuf[sizeof (charsetbuf) - 1] = '\0';
+      t = strchr (charsetbuf, '@');
+      if (t)
+	*t = 0;
+      return charsetbuf;
+    }
+  strncpy (charsetbuf, locale, sizeof (charsetbuf) - 1);
+  charsetbuf[sizeof (charsetbuf) - 1] = '\0';
+  return charsetbuf;
+}
+#endif
+
+void
+u32reset ()
+{
+#if defined (HAVE_ICONV)
+  if (u32init && localconv != (iconv_t)-1)
+    {
+      iconv_close (localconv);
+      localconv = (iconv_t)-1;
+    }
+#endif
+  u32init = 0;
+  utf8locale = 0;
+}
+
+/* u32toascii ? */
+int
+u32tochar (x, s)
+     unsigned long x;
+     char *s;
+{
+  int l;
+
+  l = (x <= UCHAR_MAX) ? 1 : ((x <= USHORT_MAX) ? 2 : 4);
+
+  if (x <= UCHAR_MAX)
+    s[0] = x & 0xFF;
+  else if (x <= USHORT_MAX)	/* assume unsigned short = 16 bits */
+    {
+      s[0] = (x >> 8) & 0xFF;
+      s[1] = x & 0xFF;
+    }
+  else
+    {
+      s[0] = (x >> 24) & 0xFF;
+      s[1] = (x >> 16) & 0xFF;
+      s[2] = (x >> 8) & 0xFF;
+      s[3] = x & 0xFF;
+    }
+  s[l] = '\0';
+  return l;  
+}
+
+int
+u32tocesc (wc, s)
+     u_bits32_t wc;
+     char *s;
+{
+  int l;
+
+  if (wc < 0x10000)
+    l = sprintf (s, "\\u%04X", wc);
+  else
+    l = sprintf (s, "\\u%08X", wc);
+  return l;
+}
+
+/* Convert unsigned 32-bit int to utf-8 character string */
+int
+u32toutf8 (wc, s)
+     u_bits32_t wc;
+     char *s;
+{
+  int l;
+
+  if (wc < 0x0080)
+    {
+      s[0] = (char)wc;
+      l = 1;
+    }
+  else if (wc < 0x0800)
+    {
+      s[0] = (wc >> 6) | 0xc0;
+      s[1] = (wc & 0x3f) | 0x80;
+      l = 2;
+    }
+  else if (wc < 0x10000)
+    {
+      /* Technically, we could return 0 here if 0xd800 <= wc <= 0x0dfff */
+      s[0] = (wc >> 12) | 0xe0;
+      s[1] = ((wc >> 6) & 0x3f) | 0x80;
+      s[2] = (wc & 0x3f) | 0x80;
+      l = 3;
+    }
+  else if (wc < 0x200000)
+    {
+      s[0] = (wc >> 18) | 0xf0;
+      s[1] = ((wc >> 12) & 0x3f) | 0x80;
+      s[2] = ((wc >>  6) & 0x3f) | 0x80;
+      s[3] = (wc & 0x3f) | 0x80;
+      l = 4;
+    }
+  /* Strictly speaking, UTF-8 doesn't have characters longer than 4 bytes */
+  else if (wc < 0x04000000)
+    {
+      s[0] = (wc >> 24) | 0xf8;
+      s[1] = ((wc >> 18) & 0x3f) | 0x80;
+      s[2] = ((wc >> 12) & 0x3f) | 0x80;
+      s[3] = ((wc >>  6) & 0x3f) | 0x80;
+      s[4] = (wc & 0x3f) | 0x80;
+      l = 5;
+    }
+  else if (wc < 0x080000000)
+    {
+      s[0] = (wc >> 30) | 0xfc;
+      s[1] = ((wc >> 24) & 0x3f) | 0x80;
+      s[2] = ((wc >> 18) & 0x3f) | 0x80;
+      s[3] = ((wc >> 12) & 0x3f) | 0x80;
+      s[4] = ((wc >>  6) & 0x3f) | 0x80;
+      s[5] = (wc & 0x3f) | 0x80;
+      l = 6;
+    }
+  else
+    l = 0;
+
+  s[l] = '\0';
+  return l;
+}
+
+/* Convert a 32-bit unsigned int (unicode) to a UTF-16 string.  Rarely used,
+   only if sizeof(wchar_t) == 2. */
+int
+u32toutf16 (c, s)
+     u_bits32_t c;
+     wchar_t *s;
+{
+  int l;
+
+  l = 0;
+  if (c < 0x0d800 || (c >= 0x0e000 && c <= 0x0ffff))
+    {
+      s[0] = (wchar_t) (c & 0xFFFF);
+      l = 1;
+    }
+  else if (c >= 0x10000 && c <= 0x010ffff)
+    {
+      c -= 0x010000;
+      s[0] = (wchar_t)((c >> 10) + 0xd800);
+      s[1] = (wchar_t)((c & 0x3ff) + 0xdc00);
+      l = 2;
+    }
+  s[l] = 0;
+  return l;
+}
+
+/* convert a single unicode-32 character into a multibyte string and put the
+   result in S, which must be large enough (at least max(10,MB_LEN_MAX) bytes) */
+int
+u32cconv (c, s)
+     unsigned long c;
+     char *s;
+{
+  wchar_t wc;
+  wchar_t ws[3];
+  int n;
+#if HAVE_ICONV
+  const char *charset;
+  char obuf[25], *optr;
+  size_t obytesleft;
+  const char *iptr;
+  size_t sn;
+#endif
+
+#if __STDC_ISO_10646__
+  wc = c;
+  if (sizeof (wchar_t) == 4 && c <= 0x7fffffff)
+    n = wctomb (s, wc);
+  else if (sizeof (wchar_t) == 2 && c <= 0x10ffff && u32toutf16 (c, ws))
+    n = wcstombs (s, ws, MB_LEN_MAX);
+  else
+    n = -1;
+  if (n != -1)
+    return n;
+#endif
+
+#if HAVE_ICONV
+  /* this is mostly from coreutils-8.5/lib/unicodeio.c */
+  if (u32init == 0)
+    {
+      utf8locale = locale_utf8locale;
+      localconv = (iconv_t)-1;
+      if (utf8locale == 0)
+	{
+#if HAVE_LOCALE_CHARSET
+	  charset = locale_charset ();
+#elif HAVE_NL_LANGINFO
+	  charset = nl_langinfo (CODESET);
+#else
+	  charset = stub_charset ();
+#endif
+	  localconv = iconv_open (charset, "UTF-8");
+	  if (localconv == (iconv_t)-1)
+	    /* We assume ASCII when presented with an unknown encoding. */
+	    localconv = iconv_open ("ASCII", "UTF-8");
+	}
+      u32init = 1;
+    }
+
+  /* NL_LANGINFO and locale_charset used when setting locale_utf8locale */
+  
+  /* If we have a UTF-8 locale, convert to UTF-8 and return converted value. */
+  n = u32toutf8 (c, s);
+  if (utf8locale)
+    return n;
+
+  /* If the conversion is not supported, even the ASCII requested above, we
+     bail now.  Currently we return the UTF-8 conversion.  We could return
+     u32tocesc(). */
+  if (localconv == (iconv_t)-1)
+    return n;
+    
+  optr = obuf;
+  obytesleft = sizeof (obuf);
+  iptr = s;
+  sn = n;
+
+  iconv (localconv, NULL, NULL, NULL, NULL);
+
+  if (iconv (localconv, (ICONV_CONST char **)&iptr, &sn, &optr, &obytesleft) == (size_t)-1)
+    {
+      /* You get ISO C99 escape sequences if iconv fails */      
+      n = u32tocesc (c, s);
+      return n;
+    }
+
+  *optr = '\0';
+
+  /* number of chars to be copied is optr - obuf if we want to do bounds
+     checking */
+  strcpy (s, obuf);
+  return (optr - obuf);
+#endif	/* HAVE_ICONV */
+
+  if (locale_utf8locale)
+    n = u32toutf8 (c, s);
+  else
+    n = u32tocesc (c, s);	/* fallback is ISO C99 escape sequences */
+  return n;
+}
+#else
+void
+u32reset ()
+{
+}
+#endif /* HANDLE_MULTIBYTE */
diff --git a/lib/sh/utf8.c b/lib/sh/utf8.c
new file mode 100644
index 0000000..fed2522
--- /dev/null
+++ b/lib/sh/utf8.c
@@ -0,0 +1,196 @@
+/* utf8.c - UTF-8 character handling functions */
+
+/* Copyright (C) 2018 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+#endif
+
+#include "bashansi.h"
+#include "shmbutil.h"
+
+extern int locale_mb_cur_max;
+extern int locale_utf8locale;
+
+#if defined (HANDLE_MULTIBYTE)
+
+char *
+utf8_mbschr (s, c)
+     const char *s;
+     int c;
+{
+  return strchr (s, c);		/* for now */
+}
+
+int
+utf8_mbscmp (s1, s2)
+     const char *s1, *s2;
+{
+  /* Use the fact that the UTF-8 encoding preserves lexicographic order.  */
+  return strcmp (s1, s2);
+}
+
+char *
+utf8_mbsmbchar (str)
+     const char *str;
+{
+  register char *s;
+
+  for (s = (char *)str; *s; s++)
+    if ((*s & 0xc0) == 0x80)
+      return s;
+  return (0);
+}
+
+int
+utf8_mbsnlen(src, srclen, maxlen)
+     const char *src;
+     size_t srclen;
+     int maxlen;
+{
+  register int sind, count;
+
+  for (sind = count = 0; src[sind] && sind <= maxlen; sind++)
+    {
+      if ((src[sind] & 0xc0) != 0x80)
+	count++;
+    }
+  return (count);
+}
+
+/* Adapted from GNU gnulib. Handles UTF-8 characters up to 4 bytes long */
+int
+utf8_mblen (s, n)
+     const char *s;
+     size_t n;
+{
+  unsigned char c, c1, c2, c3;
+
+  if (s == 0)
+    return (0);	/* no shift states */
+  if (n <= 0)
+    return (-1);
+
+  c = (unsigned char)*s;
+  if (c < 0x80)
+    return (c != 0);
+  if (c >= 0xc2)
+    {
+      c1 = (unsigned char)s[1];
+      if (c < 0xe0)
+	{
+	  if (n == 1)
+	    return -2;
+
+	  /*
+	   *				c	c1
+	   *
+	   *    U+0080..U+07FF       C2..DF   80..BF
+	   */
+
+	  if (n >= 2 && (c1 ^ 0x80) < 0x40)		/* 0x80..0xbf */
+	    return 2;
+	}
+      else if (c < 0xf0)
+	{
+	  if (n == 1)
+	    return -2;
+
+	  /*
+	   *				c	c1	c2
+	   *
+	   *    U+0800..U+0FFF       E0       A0..BF   80..BF
+	   *    U+1000..U+CFFF       E1..EC   80..BF   80..BF
+	   *    U+D000..U+D7FF       ED       80..9F   80..BF
+	   *    U+E000..U+FFFF       EE..EF   80..BF   80..BF
+	   */
+
+	  if ((c1 ^ 0x80) < 0x40
+		&& (c >= 0xe1 || c1 >= 0xa0)
+		&& (c != 0xed || c1 < 0xa0))
+	    {
+	      if (n == 2)
+		return -2;		/* incomplete */
+
+	      c2 = (unsigned char)s[2];
+	      if ((c2 ^ 0x80) < 0x40)
+		 return 3;
+	    }
+	}
+      else if (c <= 0xf4)
+	{
+	  if (n == 1)
+	    return -2;
+	 
+	  /*
+	   *				c	c1	c2	c3
+	   *
+	   *    U+10000..U+3FFFF     F0       90..BF   80..BF   80..BF
+	   *    U+40000..U+FFFFF     F1..F3   80..BF   80..BF   80..BF
+	   *    U+100000..U+10FFFF   F4       80..8F   80..BF   80..BF
+	   */
+	  if (((c1 ^ 0x80) < 0x40) 
+		&& (c >= 0xf1 || c1 >= 0x90)
+		&& (c < 0xf4 || (c == 0xf4 && c1 < 0x90)))
+	    {
+	      if (n == 2)
+		return -2;		/* incomplete */
+
+	      c2 = (unsigned char)s[2];
+	      if ((c2 ^ 0x80) < 0x40)
+		{
+		  if (n == 3)
+		    return -2;
+
+		  c3 = (unsigned char)s[3];
+	 	  if ((c3 ^ 0x80) < 0x40)
+	  	    return 4;
+		}
+	    }
+	}
+    }
+  /* invalid or incomplete multibyte character */
+  return -1;
+}
+
+/* We can optimize this if we know the locale is UTF-8, but needs to handle
+   malformed byte sequences. */
+size_t
+utf8_mbstrlen(s)
+     const char *s;
+{
+  size_t clen, nc;
+  int mb_cur_max;
+
+  nc = 0;
+  mb_cur_max = MB_CUR_MAX;
+  while (*s && (clen = (size_t)utf8_mblen(s, mb_cur_max)) != 0)
+    {
+      if (MB_INVALIDCH(clen))
+	clen = 1;	/* assume single byte */
+
+      s += clen;
+      nc++;
+    }
+  return nc;
+}
+
+#endif
diff --git a/lib/sh/vprint.c b/lib/sh/vprint.c
new file mode 100644
index 0000000..567fba3
--- /dev/null
+++ b/lib/sh/vprint.c
@@ -0,0 +1,85 @@
+/* vprint.c -- v[fs]printf() for 4.[23] BSD systems. */
+
+/* Copyright (C) 1987,1989 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (USE_VFPRINTF_EMULATION)
+
+#include <stdio.h>
+
+#if !defined (NULL)
+#  if defined (__STDC__)
+#    define NULL ((void *)0)
+#  else
+#    define NULL 0x0
+#  endif /* __STDC__ */
+#endif /* !NULL */
+
+/*
+ * Beware!  Don't trust the value returned by either of these functions; it
+ * seems that pre-4.3-tahoe implementations of _doprnt () return the first
+ * argument, i.e. a char *.
+ */
+#include <varargs.h>
+
+int
+vfprintf (iop, fmt, ap)
+     FILE *iop;
+     char *fmt;
+     va_list ap;
+{
+  int len;
+  char localbuf[BUFSIZ];
+
+  if (iop->_flag & _IONBF)
+    {
+      iop->_flag &= ~_IONBF;
+      iop->_ptr = iop->_base = localbuf;
+      len = _doprnt (fmt, ap, iop);
+      (void) fflush (iop);
+      iop->_flag |= _IONBF;
+      iop->_base = NULL;
+      iop->_bufsiz = 0;
+      iop->_cnt = 0;
+    }
+  else
+    len = _doprnt (fmt, ap, iop);
+  return (ferror (iop) ? EOF : len);
+}
+
+/*
+ * Ditto for vsprintf
+ */
+int
+vsprintf (str, fmt, ap)
+     char *str, *fmt;
+     va_list ap;
+{
+  FILE f;
+  int len;
+
+  f._flag = _IOWRT|_IOSTRG;
+  f._ptr = str;
+  f._cnt = 32767;
+  len = _doprnt (fmt, ap, &f);
+  *f._ptr = 0;
+  return (len);
+}
+#endif /* USE_VFPRINTF_EMULATION */
diff --git a/lib/sh/wcsdup.c b/lib/sh/wcsdup.c
new file mode 100644
index 0000000..62a3c86
--- /dev/null
+++ b/lib/sh/wcsdup.c
@@ -0,0 +1,44 @@
+/* wcsdup.c - duplicate wide character string */
+
+/* Copyright (C) 2006 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if !defined (HAVE_WCSDUP) && defined (HANDLE_MULTIBYTE)
+
+#include <stdc.h>
+#include <wchar.h>
+#include <bashansi.h>
+#include <xmalloc.h>
+
+wchar_t *
+wcsdup (ws)
+     const wchar_t *ws;
+{
+  wchar_t *ret;
+  size_t len;
+
+  len = wcslen (ws);
+  ret = xmalloc ((len + 1) * sizeof (wchar_t));
+  if (ret == 0)
+    return ret;
+  
+  return (wcscpy (ret, ws));
+}
+#endif /* !HAVE_WCSDUP && HANDLE_MULTIBYTE */
diff --git a/lib/sh/wcsnwidth.c b/lib/sh/wcsnwidth.c
new file mode 100644
index 0000000..9c7e7cc
--- /dev/null
+++ b/lib/sh/wcsnwidth.c
@@ -0,0 +1,56 @@
+/* wcsnwidth.c - compute display width of wide character string, up to max
+		 specified width, return length. */
+
+/* Copyright (C) 2012 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (HANDLE_MULTIBYTE)
+
+#include <stdc.h>
+#include <wchar.h>
+#include <bashansi.h>
+
+/* Return the number of wide characters that will be displayed from wide string
+   PWCS.  If the display width exceeds MAX, return the number of wide chars
+   from PWCS required to display MAX characters on the screen. */
+int
+wcsnwidth(pwcs, n, max)
+     const wchar_t *pwcs;
+     size_t n, max;
+{
+  wchar_t wc, *ws;
+  int len, l;
+
+  len = 0;
+  ws = (wchar_t *)pwcs;
+  while (n-- > 0 && (wc = *ws++) != L'\0')
+    {
+      l = wcwidth (wc);
+      if (l < 0)
+	return (-1);
+      else if (l == max - len)
+        return (ws - pwcs);
+      else if (l > max - len)
+        return (--ws - pwcs);
+      len += l;
+    }
+  return (ws - pwcs);
+}
+#endif
diff --git a/lib/sh/wcswidth.c b/lib/sh/wcswidth.c
new file mode 100644
index 0000000..1a30d9f
--- /dev/null
+++ b/lib/sh/wcswidth.c
@@ -0,0 +1,46 @@
+/* wcswidth.c - compute display width of wide character string */
+
+/* Copyright (C) 2010 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (HANDLE_MULTIBYTE) && !defined (HAVE_WCSWIDTH)
+
+#include <stdc.h>
+#include <wchar.h>
+#include <bashansi.h>
+
+int
+wcswidth(pwcs, n)
+     const wchar_t *pwcs;
+     size_t n;
+{
+  wchar_t wc;
+  int len, l;
+			
+  len = 0;
+  while (n-- > 0 && (wc = *pwcs++) != L'\0')
+    {
+      if ((l = wcwidth(wc)) < 0)
+	return (-1);
+      len += l;
+    }
+  return (len);
+}
+#endif
diff --git a/lib/sh/winsize.c b/lib/sh/winsize.c
new file mode 100644
index 0000000..861c7c8
--- /dev/null
+++ b/lib/sh/winsize.c
@@ -0,0 +1,98 @@
+/* winsize.c - handle window size changes and information. */
+
+/* Copyright (C) 2005-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include <stdc.h>
+
+#include "bashtypes.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <sys/ioctl.h>
+
+/* Try to find the definitions of `struct winsize' and TIOGCWINSZ */
+
+#if 0
+#if defined (GWINSZ_IN_SYS_IOCTL) && !defined (TIOCGWINSZ)
+#  include <sys/ioctl.h>
+#endif /* GWINSZ_IN_SYS_IOCTL && !TIOCGWINSZ */
+#endif
+
+#if defined (STRUCT_WINSIZE_IN_TERMIOS) && !defined (STRUCT_WINSIZE_IN_SYS_IOCTL)
+#  include <termios.h>
+#endif /* STRUCT_WINSIZE_IN_TERMIOS && !STRUCT_WINSIZE_IN_SYS_IOCTL */
+
+/* Not in either of the standard places, look around. */
+#if !defined (STRUCT_WINSIZE_IN_TERMIOS) && !defined (STRUCT_WINSIZE_IN_SYS_IOCTL)
+#  if defined (HAVE_SYS_STREAM_H)
+#    include <sys/stream.h>
+#  endif /* HAVE_SYS_STREAM_H */
+#  if defined (HAVE_SYS_PTEM_H) /* SVR4.2, at least, has it here */
+#    include <sys/ptem.h>
+#    define _IO_PTEM_H          /* work around SVR4.2 1.1.4 bug */
+#  endif /* HAVE_SYS_PTEM_H */
+#  if defined (HAVE_SYS_PTE_H)  /* ??? */
+#    include <sys/pte.h>
+#  endif /* HAVE_SYS_PTE_H */
+#endif /* !STRUCT_WINSIZE_IN_TERMIOS && !STRUCT_WINSIZE_IN_SYS_IOCTL */
+
+#include <stdio.h>
+
+/* Return the fd from which we are actually getting input. */
+#define input_tty() (shell_tty != -1) ? shell_tty : fileno (stderr)
+
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+extern int shell_tty;
+
+#if defined (READLINE)
+extern void rl_set_screen_size PARAMS((int, int));
+#endif
+extern void sh_set_lines_and_columns PARAMS((int, int));
+
+void
+get_new_window_size (from_sig, rp, cp)
+     int from_sig;
+     int *rp, *cp;
+{
+#if defined (TIOCGWINSZ)
+  struct winsize win;
+  int tty;
+
+  tty = input_tty ();
+  if (tty >= 0 && (ioctl (tty, TIOCGWINSZ, &win) == 0) &&
+      win.ws_row > 0 && win.ws_col > 0)
+    {
+      sh_set_lines_and_columns (win.ws_row, win.ws_col);
+#if defined (READLINE)
+      rl_set_screen_size (win.ws_row, win.ws_col);
+      if (rp)
+	*rp = win.ws_row;
+      if (cp)
+	*cp = win.ws_col;
+#endif
+    }
+#endif
+}
diff --git a/lib/sh/zcatfd.c b/lib/sh/zcatfd.c
new file mode 100644
index 0000000..aa8199f
--- /dev/null
+++ b/lib/sh/zcatfd.c
@@ -0,0 +1,74 @@
+/* zcatfd - copy contents of file descriptor to another */
+
+/* Copyright (C) 2002-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#include <sys/types.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <errno.h>
+
+#include <stdc.h>
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+#ifndef ZBUFSIZ
+#  define ZBUFSIZ 4096
+#endif
+
+extern ssize_t zread PARAMS((int, char *, size_t));
+extern int zwrite PARAMS((int, char *, ssize_t));
+
+/* Dump contents of file descriptor FD to OFD.  FN is the filename for
+   error messages (not used right now). */
+int
+zcatfd (fd, ofd, fn)
+     int fd, ofd;
+     char *fn;
+{
+  ssize_t nr;
+  int rval;
+  char lbuf[ZBUFSIZ];
+
+  rval = 0;
+  while (1)
+    {
+      nr = zread (fd, lbuf, sizeof (lbuf));
+      if (nr == 0)
+	break;
+      else if (nr < 0)
+	{
+	  rval = -1;
+	  break;
+	}
+      else if (zwrite (ofd, lbuf, nr) < 0)
+	{
+	  rval = -1;
+	  break;
+	}
+    }
+
+  return rval;
+}
diff --git a/lib/sh/zgetline.c b/lib/sh/zgetline.c
new file mode 100644
index 0000000..8ded144
--- /dev/null
+++ b/lib/sh/zgetline.c
@@ -0,0 +1,125 @@
+/* zgetline - read a line of input from a specified file descriptor and return
+	      a pointer to a newly-allocated buffer containing the data. */
+
+/* Copyright (C) 2008-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#include <sys/types.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <errno.h>
+#include "xmalloc.h"
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+extern ssize_t zread PARAMS((int, char *, size_t));
+extern ssize_t zreadc PARAMS((int, char *));
+extern ssize_t zreadintr PARAMS((int, char *, size_t));
+extern ssize_t zreadcintr PARAMS((int, char *));
+
+typedef ssize_t breadfunc_t PARAMS((int, char *, size_t));
+typedef ssize_t creadfunc_t PARAMS((int, char *));
+
+/* Initial memory allocation for automatic growing buffer in zreadlinec */
+#define GET_LINE_INITIAL_ALLOCATION 16
+
+/* Derived from GNU libc's getline.
+   The behavior is almost the same as getline. See man getline.
+   The differences are
+   	(1) using file descriptor instead of FILE *;
+	(2) the order of arguments: the file descriptor comes first;
+	(3) the addition of a fourth argument, DELIM; sets the delimiter to
+	    be something other than newline if desired.  If setting DELIM,
+	    the next argument should be 1; and
+	(4) the addition of a fifth argument, UNBUFFERED_READ; this argument
+	    controls whether get_line uses buffering or not to get a byte data
+	    from FD. get_line uses zreadc if UNBUFFERED_READ is zero; and
+	    uses zread if UNBUFFERED_READ is non-zero.
+
+   Returns number of bytes read or -1 on error. */
+
+ssize_t
+zgetline (fd, lineptr, n, delim, unbuffered_read)
+     int fd;
+     char **lineptr;
+     size_t *n;
+     int delim;
+     int unbuffered_read;
+{
+  int nr, retval;
+  char *line, c;
+
+  if (lineptr == 0 || n == 0 || (*lineptr == 0 && *n != 0))
+    return -1;
+
+  nr = 0;
+  line = *lineptr;
+  
+  while (1)
+    {
+      retval = unbuffered_read ? zread (fd, &c, 1) : zreadc(fd, &c);
+
+      if (retval <= 0)
+	{
+	  if (line && nr > 0)
+	    line[nr] = '\0';
+	  break;
+	}
+
+      if (nr + 2 >= *n)
+	{
+	  size_t new_size;
+
+	  new_size = (*n == 0) ? GET_LINE_INITIAL_ALLOCATION : *n * 2;
+	  line = (*n >= new_size) ? NULL : xrealloc (*lineptr, new_size);
+
+	  if (line)
+	    {
+	      *lineptr = line;
+	      *n = new_size;
+	    }
+	  else
+	    {
+	      if (*n > 0)
+		{
+		  (*lineptr)[*n - 1] = '\0';
+		  nr = *n - 2;
+		}
+	      break;
+	    }
+	}
+
+      line[nr] = c;
+      nr++;
+
+      if (c == delim)
+	{
+	  line[nr] = '\0';
+	  break;
+	}
+    }
+
+  return nr - 1;
+}
diff --git a/lib/sh/zmapfd.c b/lib/sh/zmapfd.c
new file mode 100644
index 0000000..f9e9ed7
--- /dev/null
+++ b/lib/sh/zmapfd.c
@@ -0,0 +1,93 @@
+/* zmapfd - read contents of file descriptor into a newly-allocated buffer */
+
+/* Copyright (C) 2006-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#include <sys/types.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <errno.h>
+
+#include "bashansi.h"
+#include "command.h"
+#include "general.h"
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+#ifndef ZBUFSIZ
+#  define ZBUFSIZ 4096
+#endif
+
+extern ssize_t zread PARAMS((int, char *, size_t));
+
+/* Dump contents of file descriptor FD to *OSTR.  FN is the filename for
+   error messages (not used right now). */
+int
+zmapfd (fd, ostr, fn)
+     int fd;
+     char **ostr;
+     char *fn;
+{
+  ssize_t nr;
+  int rval;
+  char lbuf[ZBUFSIZ];
+  char *result;
+  int rsize, rind;
+
+  rval = 0;
+  result = (char *)xmalloc (rsize = ZBUFSIZ);
+  rind = 0;
+
+  while (1)
+    {
+      nr = zread (fd, lbuf, sizeof (lbuf));
+      if (nr == 0)
+	{
+	  rval = rind;
+	  break;
+	}
+      else if (nr < 0)
+	{
+	  free (result);
+	  if (ostr)
+	    *ostr = (char *)NULL;
+	  return -1;
+	}
+
+      RESIZE_MALLOCED_BUFFER (result, rind, nr, rsize, ZBUFSIZ);
+      memcpy (result+rind, lbuf, nr);
+      rind += nr;
+    }
+
+  RESIZE_MALLOCED_BUFFER (result, rind, 1, rsize, 128);
+  result[rind] = '\0';
+
+  if (ostr)
+    *ostr = result;
+  else
+    free (result);
+
+  return rval;
+}
diff --git a/lib/sh/zread.c b/lib/sh/zread.c
new file mode 100644
index 0000000..71a06a7
--- /dev/null
+++ b/lib/sh/zread.c
@@ -0,0 +1,224 @@
+/* zread - read data from file descriptor into buffer with retries */
+
+/* Copyright (C) 1999-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#include <sys/types.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <signal.h>
+#include <errno.h>
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+#ifndef SEEK_CUR
+#  define SEEK_CUR 1
+#endif
+
+#ifndef ZBUFSIZ
+#  define ZBUFSIZ 4096
+#endif
+
+extern int executing_builtin;
+
+extern void check_signals_and_traps (void);
+extern void check_signals (void);
+extern int signal_is_trapped (int);
+
+/* Read LEN bytes from FD into BUF.  Retry the read on EINTR.  Any other
+   error causes the loop to break. */
+ssize_t
+zread (fd, buf, len)
+     int fd;
+     char *buf;
+     size_t len;
+{
+  ssize_t r;
+
+  check_signals ();	/* check for signals before a blocking read */
+  while ((r = read (fd, buf, len)) < 0 && errno == EINTR)
+    {
+      int t;
+      t = errno;
+      /* XXX - bash-5.0 */
+      /* We check executing_builtin and run traps here for backwards compatibility */
+      if (executing_builtin)
+	check_signals_and_traps ();	/* XXX - should it be check_signals()? */
+      else
+	check_signals ();
+      errno = t;
+    }
+
+  return r;
+}
+
+/* Read LEN bytes from FD into BUF.  Retry the read on EINTR, up to three
+   interrupts.  Any other error causes the loop to break. */
+
+#ifdef NUM_INTR
+#  undef NUM_INTR
+#endif
+#define NUM_INTR 3
+
+ssize_t
+zreadretry (fd, buf, len)
+     int fd;
+     char *buf;
+     size_t len;
+{
+  ssize_t r;
+  int nintr;
+
+  for (nintr = 0; ; )
+    {
+      r = read (fd, buf, len);
+      if (r >= 0)
+	return r;
+      if (r == -1 && errno == EINTR)
+	{
+	  if (++nintr >= NUM_INTR)
+	    return -1;
+	  continue;
+	}
+      return r;
+    }
+}
+
+/* Call read(2) and allow it to be interrupted.  Just a stub for now. */
+ssize_t
+zreadintr (fd, buf, len)
+     int fd;
+     char *buf;
+     size_t len;
+{
+  check_signals ();
+  return (read (fd, buf, len));
+}
+
+/* Read one character from FD and return it in CP.  Return values are as
+   in read(2).  This does some local buffering to avoid many one-character
+   calls to read(2), like those the `read' builtin performs. */
+
+static char lbuf[ZBUFSIZ];
+static size_t lind, lused;
+
+ssize_t
+zreadc (fd, cp)
+     int fd;
+     char *cp;
+{
+  ssize_t nr;
+
+  if (lind == lused || lused == 0)
+    {
+      nr = zread (fd, lbuf, sizeof (lbuf));
+      lind = 0;
+      if (nr <= 0)
+	{
+	  lused = 0;
+	  return nr;
+	}
+      lused = nr;
+    }
+  if (cp)
+    *cp = lbuf[lind++];
+  return 1;
+}
+
+/* Don't mix calls to zreadc and zreadcintr in the same function, since they
+   use the same local buffer. */
+ssize_t
+zreadcintr (fd, cp)
+     int fd;
+     char *cp;
+{
+  ssize_t nr;
+
+  if (lind == lused || lused == 0)
+    {
+      nr = zreadintr (fd, lbuf, sizeof (lbuf));
+      lind = 0;
+      if (nr <= 0)
+	{
+	  lused = 0;
+	  return nr;
+	}
+      lused = nr;
+    }
+  if (cp)
+    *cp = lbuf[lind++];
+  return 1;
+}
+
+/* Like zreadc, but read a specified number of characters at a time.  Used
+   for `read -N'. */
+ssize_t
+zreadn (fd, cp, len)
+     int fd;
+     char *cp;
+     size_t len;
+{
+  ssize_t nr;
+
+  if (lind == lused || lused == 0)
+    {
+      if (len > sizeof (lbuf))
+	len = sizeof (lbuf);
+      nr = zread (fd, lbuf, len);
+      lind = 0;
+      if (nr <= 0)
+	{
+	  lused = 0;
+	  return nr;
+	}
+      lused = nr;
+    }
+  if (cp)
+    *cp = lbuf[lind++];
+  return 1;
+}
+
+void
+zreset ()
+{
+  lind = lused = 0;
+}
+
+/* Sync the seek pointer for FD so that the kernel's idea of the last char
+   read is the last char returned by zreadc. */
+void
+zsyncfd (fd)
+     int fd;
+{
+  off_t off, r;
+
+  off = lused - lind;
+  r = 0;
+  if (off > 0)
+    r = lseek (fd, -off, SEEK_CUR);
+
+  if (r != -1)
+    lused = lind = 0;
+}
diff --git a/lib/sh/zwrite.c b/lib/sh/zwrite.c
new file mode 100644
index 0000000..3240f4f
--- /dev/null
+++ b/lib/sh/zwrite.c
@@ -0,0 +1,64 @@
+/* zwrite - write contents of buffer to file descriptor, retrying on error */
+
+/* Copyright (C) 1999-2002 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#include <sys/types.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <errno.h>
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+/* Write NB bytes from BUF to file descriptor FD, retrying the write if
+   it is interrupted.  We retry three times if we get a zero-length
+   write.  Any other signal causes this function to return prematurely. */
+int
+zwrite (fd, buf, nb)
+     int fd;
+     char *buf;
+     size_t nb;
+{
+  int n, i, nt;
+
+  for (n = nb, nt = 0;;)
+    {
+      i = write (fd, buf, n);
+      if (i > 0)
+	{
+	  n -= i;
+	  if (n <= 0)
+	    return nb;
+	  buf += i;
+	}
+      else if (i == 0)
+	{
+	  if (++nt > 3)
+	    return (nb - n);
+	}
+      else if (errno != EINTR)
+	return -1;
+    }
+}
diff --git a/lib/termcap/Makefile.in b/lib/termcap/Makefile.in
new file mode 100644
index 0000000..66dd7c1
--- /dev/null
+++ b/lib/termcap/Makefile.in
@@ -0,0 +1,90 @@
+## -*- text -*- ####################################################
+#								   #
+# Makefile for termcap replacement libbrary.			   #
+#								   #
+####################################################################
+
+# Copyright (C) 1996-2009 Free Software Foundation, Inc.
+
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+srcdir = @srcdir@
+VPATH = @srcdir@
+topdir = @top_srcdir@
+BUILD_DIR = @BUILD_DIR@
+
+libdir = @libdir@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+
+CC = @CC@
+RANLIB = @RANLIB@
+AR = @AR@
+ARFLAGS = @ARFLAGS@
+RM = rm -f
+CP = cp
+MV = mv
+
+SHELL = @MAKE_SHELL@
+
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+
+DEFS = @DEFS@
+
+INCLUDES = -I. -I../.. -I$(topdir) -I$(topdir)/lib -I$(srcdir)
+
+CCFLAGS = $(CFLAGS) $(DEFS) $(CPPFLAGS) ${INCLUDES}
+
+# Here is a rule for making .o files from .c files that doesn't force
+# the type of the machine (like -sun3) into the flags.
+.c.o:
+	$(CC) -c $(CCFLAGS) $<
+
+SOURCES = termcap.c tparam.c
+OBJECTS = termcap.o tparam.o
+
+DOCUMENTATION = termcap.texinfo
+
+THINGS_TO_TAR = $(SOURCES) $(DOCUMENTATION)
+
+##########################################################################
+
+all: libtermcap.a
+
+libtermcap.a:	$(OBJECTS)
+	$(RM) -f $@
+	$(AR) $(ARFLAGS) $@ $(OBJECTS)
+	-test -n "$(RANLIB)" && $(RANLIB) $@
+
+install:	
+
+clean:
+	$(RM) *.o *.a *.log *.cp *.tp *.vr *.fn *.aux *.pg *.toc
+
+mostlyclean: clean
+
+distclean maintainer-clean: clean
+	$(RM) Makefile
+
+$(DESTDIR)$(libdir)/libtermcap.a: libtermcap.a
+	${INSTALL_DATA} -c -m 644 libtermcap.a $@
+	-test -n "$(RANLIB)" && $(RANLIB) -t $@
+
+termcap.o: $(BUILD_DIR)/config.h
+tparam.o: $(BUILD_DIR)/config.h
+version.o: $(BUILD_DIR)/config.h
diff --git a/lib/termcap/ltcap.h b/lib/termcap/ltcap.h
new file mode 100644
index 0000000..a97f0d8
--- /dev/null
+++ b/lib/termcap/ltcap.h
@@ -0,0 +1,30 @@
+/* ltcap.h - Local declarations for termcap library. */
+
+/* Copyright (C) 1999-2009 Free Software Foundation, Inc.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _LTCAP_H_
+#define _LTCAP_H_ 1
+
+#if !defined (__APPLE__)
+#  define __private_extern__
+#endif
+
+#ifndef MAX_TGETENT_BUFSIZ
+#  define MAX_TGETENT_BUFSIZ 2048
+#endif
+
+#endif /* _LTCAP_H_ */
diff --git a/lib/termcap/termcap.c b/lib/termcap/termcap.c
new file mode 100644
index 0000000..ba3dab2
--- /dev/null
+++ b/lib/termcap/termcap.c
@@ -0,0 +1,817 @@
+/* termcap.c - Work-alike for termcap, plus extra features. */
+
+/* Copyright (C) 1985, 1986, 1993,1994, 1995, 1998, 2001,2003,2005,2006,2008,2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* Emacs config.h may rename various library functions such as malloc.  */
+#ifdef HAVE_CONFIG_H
+
+#include <config.h>
+
+/* Get the O_* definitions for open et al.  */
+#if !defined (_MINIX) && defined (HAVE_SYS_FILE_H)
+#  include <sys/file.h>
+#endif
+
+#include <fcntl.h>
+
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+
+#ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+#else
+extern char *getenv ();
+extern char *malloc ();
+extern char *realloc ();
+#endif
+
+#if defined (HAVE_STRING_H)
+#include <string.h>
+#endif
+
+#if !defined (HAVE_BCOPY) && (defined (HAVE_STRING_H) || defined (STDC_HEADERS))
+#  define bcopy(s, d, n)	memcpy ((d), (s), (n))
+#endif
+
+#else /* not HAVE_CONFIG_H */
+
+#ifdef STDC_HEADERS
+#include <stdlib.h>
+#include <string.h>
+#else
+char *getenv ();
+char *malloc ();
+char *realloc ();
+#endif
+
+/* Do this after the include, in case string.h prototypes bcopy.  */
+#if (defined(HAVE_STRING_H) || defined(STDC_HEADERS)) && !defined(bcopy)
+#define bcopy(s, d, n) memcpy ((d), (s), (n))
+#endif
+
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#ifdef _POSIX_VERSION
+#include <fcntl.h>
+#endif
+
+#endif /* not HAVE_CONFIG_H */
+
+#ifndef NULL
+#define NULL (char *) 0
+#endif
+
+#ifndef O_RDONLY
+#define O_RDONLY 0
+#endif
+
+/* BUFSIZE is the initial size allocated for the buffer
+   for reading the termcap file.
+   It is not a limit.
+   Make it large normally for speed.
+   Make it variable when debugging, so can exercise
+   increasing the space dynamically.  */
+
+#ifndef BUFSIZE
+#ifdef DEBUG
+#define BUFSIZE bufsize
+
+int bufsize = 128;
+#else
+#define BUFSIZE 2048
+#endif
+#endif
+
+#include "ltcap.h"
+
+#ifndef TERMCAP_FILE
+#define TERMCAP_FILE "/etc/termcap"
+#endif
+
+#ifndef emacs
+static void
+memory_out ()
+{
+  write (2, "virtual memory exhausted\n", 25);
+  exit (1);
+}
+
+static char *
+xmalloc (size)
+     unsigned size;
+{
+  register char *tem = malloc (size);
+
+  if (!tem)
+    memory_out ();
+  return tem;
+}
+
+static char *
+xrealloc (ptr, size)
+     char *ptr;
+     unsigned size;
+{
+  register char *tem = realloc (ptr, size);
+
+  if (!tem)
+    memory_out ();
+  return tem;
+}
+#endif /* not emacs */
+
+/* Looking up capabilities in the entry already found.  */
+
+/* The pointer to the data made by tgetent is left here
+   for tgetnum, tgetflag and tgetstr to find.  */
+static char *term_entry;
+
+static char *tgetst1 ();
+
+/* Search entry BP for capability CAP.
+   Return a pointer to the capability (in BP) if found,
+   0 if not found.  */
+
+static char *
+find_capability (bp, cap)
+     register char *bp, *cap;
+{
+  for (; *bp; bp++)
+    if (bp[0] == ':'
+	&& bp[1] == cap[0]
+	&& bp[2] == cap[1])
+      return &bp[4];
+  return NULL;
+}
+
+__private_extern__
+int
+tgetnum (cap)
+     char *cap;
+{
+  register char *ptr = find_capability (term_entry, cap);
+  if (!ptr || ptr[-1] != '#')
+    return -1;
+  return atoi (ptr);
+}
+
+__private_extern__
+int
+tgetflag (cap)
+     char *cap;
+{
+  register char *ptr = find_capability (term_entry, cap);
+  return ptr && ptr[-1] == ':';
+}
+
+/* Look up a string-valued capability CAP.
+   If AREA is non-null, it points to a pointer to a block in which
+   to store the string.  That pointer is advanced over the space used.
+   If AREA is null, space is allocated with `malloc'.  */
+
+__private_extern__
+char *
+tgetstr (cap, area)
+     char *cap;
+     char **area;
+{
+  register char *ptr = find_capability (term_entry, cap);
+  if (!ptr || (ptr[-1] != '=' && ptr[-1] != '~'))
+    return NULL;
+  return tgetst1 (ptr, area);
+}
+
+/* Table, indexed by a character in range 0100 to 0140 with 0100 subtracted,
+   gives meaning of character following \, or a space if no special meaning.
+   Eight characters per line within the string.  */
+
+static char esctab[]
+  = " \007\010  \033\014 \
+      \012 \
+  \015 \011 \013 \
+        ";
+
+/* PTR points to a string value inside a termcap entry.
+   Copy that value, processing \ and ^ abbreviations,
+   into the block that *AREA points to,
+   or to newly allocated storage if AREA is NULL.
+   Return the address to which we copied the value,
+   or NULL if PTR is NULL.  */
+
+static char *
+tgetst1 (ptr, area)
+     char *ptr;
+     char **area;
+{
+  register char *p, *r;
+  register int c;
+  register int size;
+  char *ret;
+  register int c1;
+
+  if (!ptr)
+    return NULL;
+
+  /* `ret' gets address of where to store the string.  */
+  if (!area)
+    {
+      /* Compute size of block needed (may overestimate).  */
+      p = ptr;
+      while ((c = *p++) && c != ':' && c != '\n')
+	;
+      ret = (char *) xmalloc (p - ptr + 1);
+    }
+  else
+    ret = *area;
+
+  /* Copy the string value, stopping at null or colon.
+     Also process ^ and \ abbreviations.  */
+  p = ptr;
+  r = ret;
+  while ((c = *p++) && c != ':' && c != '\n')
+    {
+      if (c == '^')
+	{
+	  c = *p++;
+	  if (c == '?')
+	    c = 0177;
+	  else
+	    c &= 037;
+	}
+      else if (c == '\\')
+	{
+	  c = *p++;
+	  if (c >= '0' && c <= '7')
+	    {
+	      c -= '0';
+	      size = 0;
+
+	      while (++size < 3 && (c1 = *p) >= '0' && c1 <= '7')
+		{
+		  c *= 8;
+		  c += c1 - '0';
+		  p++;
+		}
+	    }
+	  else if (c >= 0100 && c < 0200)
+	    {
+	      c1 = esctab[(c & ~040) - 0100];
+	      if (c1 != ' ')
+		c = c1;
+	    }
+	}
+      *r++ = c;
+    }
+  *r = '\0';
+  /* Update *AREA.  */
+  if (area)
+    *area = r + 1;
+  return ret;
+}
+
+/* Outputting a string with padding.  */
+
+short ospeed;
+/* If OSPEED is 0, we use this as the actual baud rate.  */
+int tputs_baud_rate;
+__private_extern__ char PC = '\0';
+
+/* Actual baud rate if positive;
+   - baud rate / 100 if negative.  */
+
+static int speeds[] =
+  {
+#ifdef VMS
+    0, 50, 75, 110, 134, 150, -3, -6, -12, -18,
+    -20, -24, -36, -48, -72, -96, -192
+#else /* not VMS */
+    0, 50, 75, 110, 135, 150, -2, -3, -6, -12,
+    -18, -24, -48, -96, -192, -288, -384, -576, -1152
+#endif /* not VMS */
+  };
+
+__private_extern__
+int
+tputs (str, nlines, outfun)
+     register char *str;
+     int nlines;
+     register int (*outfun) ();
+{
+  register int padcount = 0;
+  register int speed;
+
+#ifdef emacs
+  extern baud_rate;
+  speed = baud_rate;
+  /* For quite high speeds, convert to the smaller
+     units to avoid overflow.  */
+  if (speed > 10000)
+    speed = - speed / 100;
+#else
+  if (ospeed == 0)
+    speed = tputs_baud_rate;
+  else if (ospeed > 0 && ospeed < (sizeof speeds / sizeof speeds[0]))
+    speed = speeds[ospeed];
+  else
+    speed = 0;
+#endif
+
+  if (!str)
+    return -1;
+
+  while (*str >= '0' && *str <= '9')
+    {
+      padcount += *str++ - '0';
+      padcount *= 10;
+    }
+  if (*str == '.')
+    {
+      str++;
+      padcount += *str++ - '0';
+    }
+  if (*str == '*')
+    {
+      str++;
+      padcount *= nlines;
+    }
+  while (*str)
+    (*outfun) (*str++);
+
+  /* PADCOUNT is now in units of tenths of msec.
+     SPEED is measured in characters per 10 seconds
+     or in characters per .1 seconds (if negative).
+     We use the smaller units for larger speeds to avoid overflow.  */
+  padcount *= speed;
+  padcount += 500;
+  padcount /= 1000;
+  if (speed < 0)
+    padcount = -padcount;
+  else
+    {
+      padcount += 50;
+      padcount /= 100;
+    }
+
+  while (padcount-- > 0)
+    (*outfun) (PC);
+
+  return 0;
+}
+
+/* Finding the termcap entry in the termcap data base.  */
+
+struct buffer
+  {
+    char *beg;
+    int size;
+    char *ptr;
+    int ateof;
+    int full;
+  };
+
+/* Forward declarations of static functions.  */
+
+static int scan_file ();
+static char *gobble_line ();
+static int compare_contin ();
+static int name_match ();
+
+#ifdef VMS
+
+#include <rmsdef.h>
+#include <fab.h>
+#include <nam.h>
+
+static int
+valid_filename_p (fn)
+     char *fn;
+{
+  struct FAB fab = cc$rms_fab;
+  struct NAM nam = cc$rms_nam;
+  char esa[NAM$C_MAXRSS];
+
+  fab.fab$l_fna = fn;
+  fab.fab$b_fns = strlen(fn);
+  fab.fab$l_nam = &nam;
+  fab.fab$l_fop = FAB$M_NAM;
+
+  nam.nam$l_esa = esa;
+  nam.nam$b_ess = sizeof esa;
+
+  return SYS$PARSE(&fab, 0, 0) == RMS$_NORMAL;
+}
+
+#else /* !VMS */
+
+#ifdef MSDOS /* MW, May 1993 */
+static int
+valid_filename_p (fn)
+     char *fn;
+{
+  return *fn == '\\' || *fn == '/' ||
+    (*fn >= 'A' && *fn <= 'z' && fn[1] == ':');
+}
+#else
+#define valid_filename_p(fn) (*(fn) == '/')
+#endif
+
+#endif /* !VMS */
+
+/* Find the termcap entry data for terminal type NAME
+   and store it in the block that BP points to.
+   Record its address for future use.
+
+   If BP is null, space is dynamically allocated.
+
+   Return -1 if there is some difficulty accessing the data base
+   of terminal types,
+   0 if the data base is accessible but the type NAME is not defined
+   in it, and some other value otherwise.  */
+
+__private_extern__
+int
+tgetent (bp, name)
+     char *bp, *name;
+{
+  register char *termcap_name;
+  register int fd;
+  struct buffer buf;
+  register char *bp1;
+  char *bp2;
+  char *term;
+  int malloc_size = 0;
+  register int c;
+  char *tcenv;			/* TERMCAP value, if it contains :tc=.  */
+  char *indirect = NULL;	/* Terminal type in :tc= in TERMCAP value.  */
+  int filep;
+
+#ifdef INTERNAL_TERMINAL
+  /* For the internal terminal we don't want to read any termcap file,
+     so fake it.  */
+  if (!strcmp (name, "internal"))
+    {
+      term = INTERNAL_TERMINAL;
+      if (!bp)
+	{
+	  malloc_size = 1 + strlen (term);
+	  bp = (char *) xmalloc (malloc_size);
+	}
+      strcpy (bp, term);
+      goto ret;
+    }
+#endif /* INTERNAL_TERMINAL */
+
+  /* For compatibility with programs like `less' that want to
+     put data in the termcap buffer themselves as a fallback.  */
+  if (bp)
+    term_entry = bp;
+
+  termcap_name = getenv ("TERMCAP");
+  if (termcap_name && *termcap_name == '\0')
+    termcap_name = NULL;
+#if 0
+#if defined (MSDOS) && !defined (TEST)
+  if (termcap_name && (*termcap_name == '\\'
+		       || *termcap_name == '/'
+		       || termcap_name[1] == ':'))
+    dostounix_filename(termcap_name);
+#endif
+#endif
+
+  filep = termcap_name && valid_filename_p (termcap_name);
+
+  /* If termcap_name is non-null and starts with / (in the un*x case, that is),
+     it is a file name to use instead of /etc/termcap.
+     If it is non-null and does not start with /,
+     it is the entry itself, but only if
+     the name the caller requested matches the TERM variable.  */
+
+  if (termcap_name && !filep && !strcmp (name, getenv ("TERM")))
+    {
+      indirect = tgetst1 (find_capability (termcap_name, "tc"), (char **) 0);
+      if (!indirect)
+	{
+	  if (!bp)
+	    bp = termcap_name;
+	  else
+	    strcpy (bp, termcap_name);
+	  goto ret;
+	}
+      else
+	{			/* It has tc=.  Need to read /etc/termcap.  */
+	  tcenv = termcap_name;
+ 	  termcap_name = NULL;
+	}
+    }
+
+  if (!termcap_name || !filep)
+    termcap_name = TERMCAP_FILE;
+
+  /* Here we know we must search a file and termcap_name has its name.  */
+
+#ifdef MSDOS
+  fd = open (termcap_name, O_RDONLY|O_TEXT, 0);
+#else
+  fd = open (termcap_name, O_RDONLY, 0);
+#endif
+  if (fd < 0)
+    return -1;
+
+  buf.size = BUFSIZE;
+  /* Add 1 to size to ensure room for terminating null.  */
+  buf.beg = (char *) xmalloc (buf.size + 1);
+  term = indirect ? indirect : name;
+
+  if (!bp)
+    {
+      malloc_size = indirect ? strlen (tcenv) + 1 : buf.size;
+      bp = (char *) xmalloc (malloc_size);
+    }
+  bp1 = bp;
+
+  if (indirect)
+    /* Copy the data from the environment variable.  */
+    {
+      strcpy (bp, tcenv);
+      bp1 += strlen (tcenv);
+    }
+
+  while (term)
+    {
+      /* Scan the file, reading it via buf, till find start of main entry.  */
+      if (scan_file (term, fd, &buf) == 0)
+	{
+	  close (fd);
+	  free (buf.beg);
+	  if (malloc_size)
+	    free (bp);
+	  return 0;
+	}
+
+      /* Free old `term' if appropriate.  */
+      if (term != name)
+	free (term);
+
+      /* If BP is malloc'd by us, make sure it is big enough.  */
+      if (malloc_size)
+	{
+	  malloc_size = bp1 - bp + buf.size;
+	  termcap_name = (char *) xrealloc (bp, malloc_size);
+	  bp1 += termcap_name - bp;
+	  bp = termcap_name;
+	}
+
+      bp2 = bp1;
+
+      /* Copy the line of the entry from buf into bp.  */
+      termcap_name = buf.ptr;
+      while ((*bp1++ = c = *termcap_name++) && c != '\n')
+	/* Drop out any \ newline sequence.  */
+	if (c == '\\' && *termcap_name == '\n')
+	  {
+	    bp1--;
+	    termcap_name++;
+	  }
+      *bp1 = '\0';
+
+      /* Does this entry refer to another terminal type's entry?
+	 If something is found, copy it into heap and null-terminate it.  */
+      term = tgetst1 (find_capability (bp2, "tc"), (char **) 0);
+    }
+
+  close (fd);
+  free (buf.beg);
+
+  if (malloc_size)
+    bp = (char *) xrealloc (bp, bp1 - bp + 1);
+
+ ret:
+  term_entry = bp;
+  return 1;
+}
+
+/* Given file open on FD and buffer BUFP,
+   scan the file from the beginning until a line is found
+   that starts the entry for terminal type STR.
+   Return 1 if successful, with that line in BUFP,
+   or 0 if no entry is found in the file.  */
+
+static int
+scan_file (str, fd, bufp)
+     char *str;
+     int fd;
+     register struct buffer *bufp;
+{
+  register char *end;
+
+  bufp->ptr = bufp->beg;
+  bufp->full = 0;
+  bufp->ateof = 0;
+  *bufp->ptr = '\0';
+
+  lseek (fd, 0L, 0);
+
+  while (!bufp->ateof)
+    {
+      /* Read a line into the buffer.  */
+      end = NULL;
+      do
+	{
+	  /* if it is continued, append another line to it,
+	     until a non-continued line ends.  */
+	  end = gobble_line (fd, bufp, end);
+	}
+      while (!bufp->ateof && end[-2] == '\\');
+
+      if (*bufp->ptr != '#'
+	  && name_match (bufp->ptr, str))
+	return 1;
+
+      /* Discard the line just processed.  */
+      bufp->ptr = end;
+    }
+  return 0;
+}
+
+/* Return nonzero if NAME is one of the names specified
+   by termcap entry LINE.  */
+
+static int
+name_match (line, name)
+     char *line, *name;
+{
+  register char *tem;
+
+  if (!compare_contin (line, name))
+    return 1;
+  /* This line starts an entry.  Is it the right one?  */
+  for (tem = line; *tem && *tem != '\n' && *tem != ':'; tem++)
+    if (*tem == '|' && !compare_contin (tem + 1, name))
+      return 1;
+
+  return 0;
+}
+
+static int
+compare_contin (str1, str2)
+     register char *str1, *str2;
+{
+  register int c1, c2;
+  while (1)
+    {
+      c1 = *str1++;
+      c2 = *str2++;
+      while (c1 == '\\' && *str1 == '\n')
+	{
+	  str1++;
+	  while ((c1 = *str1++) == ' ' || c1 == '\t');
+	}
+      if (c2 == '\0')
+	{
+	  /* End of type being looked up.  */
+	  if (c1 == '|' || c1 == ':')
+	    /* If end of name in data base, we win.  */
+	    return 0;
+	  else
+	    return 1;
+        }
+      else if (c1 != c2)
+	return 1;
+    }
+}
+
+/* Make sure that the buffer <- BUFP contains a full line
+   of the file open on FD, starting at the place BUFP->ptr
+   points to.  Can read more of the file, discard stuff before
+   BUFP->ptr, or make the buffer bigger.
+
+   Return the pointer to after the newline ending the line,
+   or to the end of the file, if there is no newline to end it.
+
+   Can also merge on continuation lines.  If APPEND_END is
+   non-null, it points past the newline of a line that is
+   continued; we add another line onto it and regard the whole
+   thing as one line.  The caller decides when a line is continued.  */
+
+static char *
+gobble_line (fd, bufp, append_end)
+     int fd;
+     register struct buffer *bufp;
+     char *append_end;
+{
+  register char *end;
+  register int nread;
+  register char *buf = bufp->beg;
+  register char *tem;
+
+  if (!append_end)
+    append_end = bufp->ptr;
+
+  while (1)
+    {
+      end = append_end;
+      while (*end && *end != '\n') end++;
+      if (*end)
+        break;
+      if (bufp->ateof)
+	return buf + bufp->full;
+      if (bufp->ptr == buf)
+	{
+	  if (bufp->full == bufp->size)
+	    {
+	      bufp->size *= 2;
+	      /* Add 1 to size to ensure room for terminating null.  */
+	      tem = (char *) xrealloc (buf, bufp->size + 1);
+	      bufp->ptr = (bufp->ptr - buf) + tem;
+	      append_end = (append_end - buf) + tem;
+	      bufp->beg = buf = tem;
+	    }
+	}
+      else
+	{
+	  append_end -= bufp->ptr - buf;
+	  bcopy (bufp->ptr, buf, bufp->full -= bufp->ptr - buf);
+	  bufp->ptr = buf;
+	}
+      if (!(nread = read (fd, buf + bufp->full, bufp->size - bufp->full)))
+	bufp->ateof = 1;
+      bufp->full += nread;
+      buf[bufp->full] = '\0';
+    }
+  return end + 1;
+}
+
+#ifdef TEST
+
+#ifdef NULL
+#undef NULL
+#endif
+
+#include <stdio.h>
+
+main (argc, argv)
+     int argc;
+     char **argv;
+{
+  char *term;
+  char *buf;
+
+  term = argv[1];
+  printf ("TERM: %s\n", term);
+
+  buf = (char *) tgetent (0, term);
+  if ((int) buf <= 0)
+    {
+      printf ("No entry.\n");
+      return 0;
+    }
+
+  printf ("Entry: %s\n", buf);
+
+  tprint ("cm");
+  tprint ("AL");
+
+  printf ("co: %d\n", tgetnum ("co"));
+  printf ("am: %d\n", tgetflag ("am"));
+}
+
+tprint (cap)
+     char *cap;
+{
+  char *x = tgetstr (cap, 0);
+  register char *y;
+
+  printf ("%s: ", cap);
+  if (x)
+    {
+      for (y = x; *y; y++)
+	if (*y <= ' ' || *y == 0177)
+	  printf ("\\%0o", *y);
+	else
+	  putchar (*y);
+      free (x);
+    }
+  else
+    printf ("none");
+  putchar ('\n');
+}
+
+#endif /* TEST */
diff --git a/lib/termcap/termcap.h b/lib/termcap/termcap.h
new file mode 100644
index 0000000..b0e3061
--- /dev/null
+++ b/lib/termcap/termcap.h
@@ -0,0 +1,63 @@
+/* termcap.h - public declarations for termcap library. */
+
+/* Copyright (C) 1991, 1992, 1995, 2001, 2005, 2006, 2008,2009 Free Software Foundation, Inc.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _TERMCAP_H
+#define _TERMCAP_H 1
+
+#if __STDC__
+
+extern int tgetent (char *buffer, const char *termtype);
+
+extern int tgetnum (const char *name);
+extern int tgetflag (const char *name);
+extern char *tgetstr (const char *name, char **area);
+
+extern char PC;
+extern short ospeed;
+extern int tputs (const char *string, int nlines, int (*outfun) (int));
+
+extern char *tparam (const char *ctlstring, char *buffer, int size, ...);
+
+extern char *UP;
+extern char *BC;
+
+extern char *tgoto (const char *cstring, int hpos, int vpos);
+
+#else /* not __STDC__ */
+
+extern int tgetent ();
+
+extern int tgetnum ();
+extern int tgetflag ();
+extern char *tgetstr ();
+
+extern char PC;
+extern short ospeed;
+
+extern void tputs ();
+
+extern char *tparam ();
+
+extern char *UP;
+extern char *BC;
+
+extern char *tgoto ();
+
+#endif /* not __STDC__ */
+
+#endif /* not _TERMCAP_H */
diff --git a/lib/termcap/tparam.c b/lib/termcap/tparam.c
new file mode 100644
index 0000000..c4bff08
--- /dev/null
+++ b/lib/termcap/tparam.c
@@ -0,0 +1,345 @@
+/* tparam.c - merge parameters into a termcap entry string. */
+
+/* Copyright (C) 1985, 1986, 1993,1994, 1995, 1998, 2001,2003,2005,2006,2008,2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* Emacs config.h may rename various library functions such as malloc.  */
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+
+#ifdef HAVE_STDLIB_H 
+#  include <stdlib.h>
+#else
+extern char *getenv ();
+extern char *malloc ();
+extern char *realloc ();
+#endif
+
+#if defined (HAVE_STRING_H)
+#include <string.h>
+#endif
+
+#if !defined (HAVE_BCOPY) && (defined (HAVE_STRING_H) || defined (STDC_HEADERS))
+#  define bcopy(s, d, n)	memcpy ((d), (s), (n))
+#endif
+
+#else /* not HAVE_CONFIG_H */
+
+#if defined(HAVE_STRING_H) || defined(STDC_HEADERS)
+#define bcopy(s, d, n) memcpy ((d), (s), (n))
+#endif
+
+#ifdef STDC_HEADERS
+#include <stdlib.h>
+#include <string.h>
+#else
+char *malloc ();
+char *realloc ();
+#endif
+
+#endif /* not HAVE_CONFIG_H */
+
+#include "ltcap.h"
+
+#ifndef NULL
+#define NULL (char *) 0
+#endif
+
+#ifndef emacs
+static void
+memory_out ()
+{
+  write (2, "virtual memory exhausted\n", 25);
+  exit (1);
+}
+
+static char *
+xmalloc (size)
+     unsigned size;
+{
+  register char *tem = malloc (size);
+
+  if (!tem)
+    memory_out ();
+  return tem;
+}
+
+static char *
+xrealloc (ptr, size)
+     char *ptr;
+     unsigned size;
+{
+  register char *tem = realloc (ptr, size);
+
+  if (!tem)
+    memory_out ();
+  return tem;
+}
+#endif /* not emacs */
+
+/* Assuming STRING is the value of a termcap string entry
+   containing `%' constructs to expand parameters,
+   merge in parameter values and store result in block OUTSTRING points to.
+   LEN is the length of OUTSTRING.  If more space is needed,
+   a block is allocated with `malloc'.
+
+   The value returned is the address of the resulting string.
+   This may be OUTSTRING or may be the address of a block got with `malloc'.
+   In the latter case, the caller must free the block.
+
+   The fourth and following args to tparam serve as the parameter values.  */
+
+static char *tparam1 ();
+
+/* VARARGS 2 */
+char *
+tparam (string, outstring, len, arg0, arg1, arg2, arg3)
+     char *string;
+     char *outstring;
+     int len;
+     int arg0, arg1, arg2, arg3;
+{
+  int arg[4];
+
+  arg[0] = arg0;
+  arg[1] = arg1;
+  arg[2] = arg2;
+  arg[3] = arg3;
+  return tparam1 (string, outstring, len, NULL, NULL, arg);
+}
+
+__private_extern__ char *BC;
+__private_extern__ char *UP;
+
+static char tgoto_buf[50];
+
+__private_extern__
+char *
+tgoto (cm, hpos, vpos)
+     char *cm;
+     int hpos, vpos;
+{
+  int args[2];
+  if (!cm)
+    return NULL;
+  args[0] = vpos;
+  args[1] = hpos;
+  return tparam1 (cm, tgoto_buf, 50, UP, BC, args);
+}
+
+static char *
+tparam1 (string, outstring, len, up, left, argp)
+     char *string;
+     char *outstring;
+     int len;
+     char *up, *left;
+     register int *argp;
+{
+  register int c;
+  register char *p = string;
+  register char *op = outstring;
+  char *outend;
+  int outlen = 0;
+
+  register int tem;
+  int *old_argp = argp;
+  int doleft = 0;
+  int doup = 0;
+
+  outend = outstring + len;
+
+  while (1)
+    {
+      /* If the buffer might be too short, make it bigger.  */
+      if (op + 5 >= outend)
+	{
+	  register char *new;
+	  if (outlen == 0)
+	    {
+	      outlen = len + 40;
+	      new = (char *) xmalloc (outlen);
+	      outend += 40;
+	      bcopy (outstring, new, op - outstring);
+	    }
+	  else
+	    {
+	      outend += outlen;
+	      outlen *= 2;
+	      new = (char *) xrealloc (outstring, outlen);
+	    }
+	  op += new - outstring;
+	  outend += new - outstring;
+	  outstring = new;
+	}
+      c = *p++;
+      if (!c)
+	break;
+      if (c == '%')
+	{
+	  c = *p++;
+	  tem = *argp;
+	  switch (c)
+	    {
+	    case 'd':		/* %d means output in decimal.  */
+	      if (tem < 10)
+		goto onedigit;
+	      if (tem < 100)
+		goto twodigit;
+	    case '3':		/* %3 means output in decimal, 3 digits.  */
+	      if (tem > 999)
+		{
+		  *op++ = tem / 1000 + '0';
+		  tem %= 1000;
+		}
+	      *op++ = tem / 100 + '0';
+	    case '2':		/* %2 means output in decimal, 2 digits.  */
+	    twodigit:
+	      tem %= 100;
+	      *op++ = tem / 10 + '0';
+	    onedigit:
+	      *op++ = tem % 10 + '0';
+	      argp++;
+	      break;
+
+	    case 'C':
+	      /* For c-100: print quotient of value by 96, if nonzero,
+		 then do like %+.  */
+	      if (tem >= 96)
+		{
+		  *op++ = tem / 96;
+		  tem %= 96;
+		}
+	    case '+':		/* %+x means add character code of char x.  */
+	      tem += *p++;
+	    case '.':		/* %. means output as character.  */
+	      if (left)
+		{
+		  /* If want to forbid output of 0 and \n and \t,
+		     and this is one of them, increment it.  */
+		  while (tem == 0 || tem == '\n' || tem == '\t')
+		    {
+		      tem++;
+		      if (argp == old_argp)
+			doup++, outend -= strlen (up);
+		      else
+			doleft++, outend -= strlen (left);
+		    }
+		}
+	      *op++ = tem ? tem : 0200;
+	    case 'f':		/* %f means discard next arg.  */
+	      argp++;
+	      break;
+
+	    case 'b':		/* %b means back up one arg (and re-use it).  */
+	      argp--;
+	      break;
+
+	    case 'r':		/* %r means interchange following two args.  */
+	      argp[0] = argp[1];
+	      argp[1] = tem;
+	      old_argp++;
+	      break;
+
+	    case '>':		/* %>xy means if arg is > char code of x, */
+	      if (argp[0] > *p++) /* then add char code of y to the arg, */
+		argp[0] += *p;	/* and in any case don't output.  */
+	      p++;		/* Leave the arg to be output later.  */
+	      break;
+
+	    case 'a':		/* %a means arithmetic.  */
+	      /* Next character says what operation.
+		 Add or subtract either a constant or some other arg.  */
+	      /* First following character is + to add or - to subtract
+		 or = to assign.  */
+	      /* Next following char is 'p' and an arg spec
+		 (0100 plus position of that arg relative to this one)
+		 or 'c' and a constant stored in a character.  */
+	      tem = p[2] & 0177;
+	      if (p[1] == 'p')
+		tem = argp[tem - 0100];
+	      if (p[0] == '-')
+		argp[0] -= tem;
+	      else if (p[0] == '+')
+		argp[0] += tem;
+	      else if (p[0] == '*')
+		argp[0] *= tem;
+	      else if (p[0] == '/')
+		argp[0] /= tem;
+	      else
+		argp[0] = tem;
+
+	      p += 3;
+	      break;
+
+	    case 'i':		/* %i means add one to arg, */
+	      argp[0] ++;	/* and leave it to be output later.  */
+	      argp[1] ++;	/* Increment the following arg, too!  */
+	      break;
+
+	    case '%':		/* %% means output %; no arg.  */
+	      goto ordinary;
+
+	    case 'n':		/* %n means xor each of next two args with 140.  */
+	      argp[0] ^= 0140;
+	      argp[1] ^= 0140;
+	      break;
+
+	    case 'm':		/* %m means xor each of next two args with 177.  */
+	      argp[0] ^= 0177;
+	      argp[1] ^= 0177;
+	      break;
+
+	    case 'B':		/* %B means express arg as BCD char code.  */
+	      argp[0] += 6 * (tem / 10);
+	      break;
+
+	    case 'D':		/* %D means weird Delta Data transformation.  */
+	      argp[0] -= 2 * (tem % 16);
+	      break;
+	    }
+	}
+      else
+	/* Ordinary character in the argument string.  */
+      ordinary:
+	*op++ = c;
+    }
+  *op = 0;
+  while (doup-- > 0)
+    strcat (op, up);
+  while (doleft-- > 0)
+    strcat (op, left);
+  return outstring;
+}
+
+#ifdef DEBUG
+
+main (argc, argv)
+     int argc;
+     char **argv;
+{
+  char buf[50];
+  int args[3];
+  args[0] = atoi (argv[2]);
+  args[1] = atoi (argv[3]);
+  args[2] = atoi (argv[4]);
+  tparam1 (argv[1], buf, "LEFT", "UP", args);
+  printf ("%s\n", buf);
+  return 0;
+}
+
+#endif /* DEBUG */
diff --git a/lib/termcap/version.c b/lib/termcap/version.c
new file mode 100644
index 0000000..cad57be
--- /dev/null
+++ b/lib/termcap/version.c
@@ -0,0 +1,22 @@
+/* version.c - termcap library version information. */
+
+/* Copyright (C) 1985-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* Make the library identifiable with the RCS ident command.  */
+static char *termcap_version_string = "\n$Version: GNU termcap 1.3 $\n";
diff --git a/lib/tilde/Makefile.in b/lib/tilde/Makefile.in
new file mode 100644
index 0000000..c21d389
--- /dev/null
+++ b/lib/tilde/Makefile.in
@@ -0,0 +1,126 @@
+## -*- text -*- ####################################################
+#								   #
+# Makefile for the GNU Tilde Library.				   #
+#								   #
+####################################################################
+
+# Copyright (C) 1996-2009 Free Software Foundation, Inc.     
+
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+srcdir = @srcdir@
+VPATH = @srcdir@
+topdir = @top_srcdir@
+BUILD_DIR = @BUILD_DIR@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+
+CC = @CC@
+RANLIB = @RANLIB@
+AR = @AR@
+ARFLAGS = @ARFLAGS@
+RM = rm
+CP = cp
+MV = mv
+
+SHELL = @MAKE_SHELL@
+
+PROFILE_FLAGS = @PROFILE_FLAGS@
+
+CFLAGS = @CFLAGS@
+LOCAL_CFLAGS = @LOCAL_CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@ @LOCAL_LDFLAGS@
+
+DEFS = @DEFS@
+LOCAL_DEFS = @LOCAL_DEFS@
+
+BASHINCDIR = ${topdir}/include
+
+INCLUDES = -I. -I../.. -I$(topdir) -I${BASHINCDIR} -I$(topdir)/lib
+
+CCFLAGS = ${ASAN_CFLAGS} $(PROFILE_FLAGS) $(DEFS) $(LOCAL_DEFS) $(CPPFLAGS) \
+	  ${INCLUDES} $(LOCAL_CFLAGS) $(CFLAGS)
+
+.c.o:
+	$(CC) -c $(CCFLAGS) $<
+
+# The name of the library target.
+LIBRARY_NAME = libtilde.a
+
+# The C code source files for this library.
+CSOURCES = $(srcdir)/tilde.c
+
+# The header files for this library.
+HSOURCES = $(srcdir)/tilde.h
+
+OBJECTS = tilde.o
+
+# The texinfo files which document this library.
+DOCSOURCE = doc/tilde.texi
+DOCOBJECT = doc/tilde.dvi
+DOCSUPPORT = doc/Makefile
+DOCUMENTATION = $(DOCSOURCE) $(DOCOBJECT) $(DOCSUPPORT)
+
+SUPPORT = Makefile ChangeLog $(DOCSUPPORT)
+
+SOURCES  = $(CSOURCES) $(HSOURCES) $(DOCSOURCE)
+
+THINGS_TO_TAR = $(SOURCES) $(SUPPORT)
+
+######################################################################
+
+all: $(LIBRARY_NAME)
+
+$(LIBRARY_NAME): $(OBJECTS)
+	$(RM) -f $@
+	$(AR) $(ARFLAGS) $@ $(OBJECTS)
+	-test -n "$(RANLIB)" && $(RANLIB) $@
+
+documentation: force
+	-(cd doc; $(MAKE) $(MFLAGS))
+
+force:
+
+# The rule for 'includes' is written funny so that the if statement
+# always returns TRUE unless there really was an error installing the
+# include files.
+install:
+	$(INSTALL_DATA) -c -m 644 $(LIBRARY_NAME) $(libdir)/$(LIBRARY_NAME)
+	-test -n "$(RANLIB)" && $(RANLIB) -t $(libdir)/$(LIBRARY_NAME)
+
+clean:
+	$(RM) -f $(OBJECTS) $(LIBRARY_NAME)
+	-( cd doc && $(MAKE) $(MFLAGS) $@ )
+
+realclean distclean maintainer-clean: clean
+	-( cd doc && $(MAKE) $(MFLAGS) $@ )
+	$(RM) -f Makefile
+
+mostlyclean: clean
+	-( cd doc && $(MAKE) $(MFLAGS) $@ )
+
+######################################################################
+#								     #
+#  Dependencies for the object files which make up this library.     #
+#								     #
+######################################################################
+
+tilde.o: tilde.h $(BASHINCDIR)/ansi_stdlib.h
+tilde.o: $(BUILD_DIR)/config.h
+
+# Rules for deficient makes, like SunOS and Solaris
+tilde.o: tilde.c
diff --git a/lib/tilde/README b/lib/tilde/README
new file mode 100644
index 0000000..a8772f3
--- /dev/null
+++ b/lib/tilde/README
@@ -0,0 +1,5 @@
+If you're building this separately from bash or the readline library, add
+$(srcdir)/shell.c to the CSOURCES variable and shell.o to the OBJECTS
+variable in Makefile.in.  (Not that this is very useful without readline
+or bash.)
+
diff --git a/lib/tilde/shell.c b/lib/tilde/shell.c
new file mode 100644
index 0000000..9805a92
--- /dev/null
+++ b/lib/tilde/shell.c
@@ -0,0 +1,79 @@
+/* shell.c -- tilde utility functions that are normally provided by
+	      bash when readline is linked as part of the shell. */
+
+/* Copyright (C) 1998-2017 Free Software Foundation, Inc.
+
+   This file is part of the GNU Tilde Library.
+
+   The GNU Tilde Library is free software: you can redistribute it and/or
+   modify it under the terms of the GNU General Public License as published
+   by the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   The GNU Tilde Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with the GNU Tilde Library.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif /* HAVE_UNISTD_H */
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#if defined (HAVE_STRING_H)
+#  include <string.h>
+#else
+#  include <strings.h>
+#endif /* !HAVE_STRING_H */
+
+#include <pwd.h>
+
+#if !defined (HAVE_GETPW_DECLS)
+extern struct passwd *getpwuid ();
+#endif /* !HAVE_GETPW_DECLS */
+
+char *
+get_env_value (char *varname)
+{
+  return ((char *)getenv (varname));
+}
+
+/* If we're not using $HOME, assume that the passwd file information won't
+   change while this shell instance is running. */
+char *
+get_home_dir (void)
+{
+  static char *home_dir = (char *)NULL;
+  struct passwd *entry;
+
+  if (home_dir)
+    return (home_dir);
+
+#if defined (HAVE_GETPWUID)
+  entry = getpwuid (getuid ());
+  if (entry)
+    home_dir = savestring (entry->pw_dir);
+#endif
+
+#if defined (HAVE_GETPWENT)
+  endpwent ();		/* some systems need this */
+#endif
+
+  return (home_dir);
+}
diff --git a/lib/tilde/tilde.c b/lib/tilde/tilde.c
new file mode 100644
index 0000000..d678a31
--- /dev/null
+++ b/lib/tilde/tilde.c
@@ -0,0 +1,493 @@
+/* tilde.c -- Tilde expansion code (~/foo := $HOME/foo). */
+
+/* Copyright (C) 1988-2020 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library (Readline), a library
+   for reading lines of text with interactive input and history editing.
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#if defined (HAVE_STRING_H)
+#  include <string.h>
+#else /* !HAVE_STRING_H */
+#  include <strings.h>
+#endif /* !HAVE_STRING_H */  
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#include <sys/types.h>
+#if defined (HAVE_PWD_H)
+#include <pwd.h>
+#endif
+
+#include "tilde.h"
+
+#if defined (TEST) || defined (STATIC_MALLOC)
+static void *xmalloc (), *xrealloc ();
+#else
+#  include "xmalloc.h"
+#endif /* TEST || STATIC_MALLOC */
+
+#if !defined (HAVE_GETPW_DECLS)
+#  if defined (HAVE_GETPWUID)
+extern struct passwd *getpwuid (uid_t);
+#  endif
+#  if defined (HAVE_GETPWNAM)
+extern struct passwd *getpwnam (const char *);
+#  endif
+#endif /* !HAVE_GETPW_DECLS */
+
+#if !defined (savestring)
+#define savestring(x) strcpy ((char *)xmalloc (1 + strlen (x)), (x))
+#endif /* !savestring */
+
+#if !defined (NULL)
+#  if defined (__STDC__)
+#    define NULL ((void *) 0)
+#  else
+#    define NULL 0x0
+#  endif /* !__STDC__ */
+#endif /* !NULL */
+
+/* If being compiled as part of bash, these will be satisfied from
+   variables.o.  If being compiled as part of readline, they will
+   be satisfied from shell.o. */
+extern char *sh_get_home_dir (void);
+extern char *sh_get_env_value (const char *);
+
+/* The default value of tilde_additional_prefixes.  This is set to
+   whitespace preceding a tilde so that simple programs which do not
+   perform any word separation get desired behaviour. */
+static const char *default_prefixes[] =
+  { " ~", "\t~", (const char *)NULL };
+
+/* The default value of tilde_additional_suffixes.  This is set to
+   whitespace or newline so that simple programs which do not
+   perform any word separation get desired behaviour. */
+static const char *default_suffixes[] =
+  { " ", "\n", (const char *)NULL };
+
+/* If non-null, this contains the address of a function that the application
+   wants called before trying the standard tilde expansions.  The function
+   is called with the text sans tilde, and returns a malloc()'ed string
+   which is the expansion, or a NULL pointer if the expansion fails. */
+tilde_hook_func_t *tilde_expansion_preexpansion_hook = (tilde_hook_func_t *)NULL;
+
+/* If non-null, this contains the address of a function to call if the
+   standard meaning for expanding a tilde fails.  The function is called
+   with the text (sans tilde, as in "foo"), and returns a malloc()'ed string
+   which is the expansion, or a NULL pointer if there is no expansion. */
+tilde_hook_func_t *tilde_expansion_failure_hook = (tilde_hook_func_t *)NULL;
+
+/* When non-null, this is a NULL terminated array of strings which
+   are duplicates for a tilde prefix.  Bash uses this to expand
+   `=~' and `:~'. */
+char **tilde_additional_prefixes = (char **)default_prefixes;
+
+/* When non-null, this is a NULL terminated array of strings which match
+   the end of a username, instead of just "/".  Bash sets this to
+   `:' and `=~'. */
+char **tilde_additional_suffixes = (char **)default_suffixes;
+
+static int tilde_find_prefix (const char *, int *);
+static int tilde_find_suffix (const char *);
+static char *isolate_tilde_prefix (const char *, int *);
+static char *glue_prefix_and_suffix (char *, const char *, int);
+
+/* Find the start of a tilde expansion in STRING, and return the index of
+   the tilde which starts the expansion.  Place the length of the text
+   which identified this tilde starter in LEN, excluding the tilde itself. */
+static int
+tilde_find_prefix (const char *string, int *len)
+{
+  register int i, j, string_len;
+  register char **prefixes;
+
+  prefixes = tilde_additional_prefixes;
+
+  string_len = strlen (string);
+  *len = 0;
+
+  if (*string == '\0' || *string == '~')
+    return (0);
+
+  if (prefixes)
+    {
+      for (i = 0; i < string_len; i++)
+	{
+	  for (j = 0; prefixes[j]; j++)
+	    {
+	      if (strncmp (string + i, prefixes[j], strlen (prefixes[j])) == 0)
+		{
+		  *len = strlen (prefixes[j]) - 1;
+		  return (i + *len);
+		}
+	    }
+	}
+    }
+  return (string_len);
+}
+
+/* Find the end of a tilde expansion in STRING, and return the index of
+   the character which ends the tilde definition.  */
+static int
+tilde_find_suffix (const char *string)
+{
+  register int i, j, string_len;
+  register char **suffixes;
+
+  suffixes = tilde_additional_suffixes;
+  string_len = strlen (string);
+
+  for (i = 0; i < string_len; i++)
+    {
+#if defined (__MSDOS__)
+      if (string[i] == '/' || string[i] == '\\' /* || !string[i] */)
+#else
+      if (string[i] == '/' /* || !string[i] */)
+#endif
+	break;
+
+      for (j = 0; suffixes && suffixes[j]; j++)
+	{
+	  if (strncmp (string + i, suffixes[j], strlen (suffixes[j])) == 0)
+	    return (i);
+	}
+    }
+  return (i);
+}
+
+/* Return a new string which is the result of tilde expanding STRING. */
+char *
+tilde_expand (const char *string)
+{
+  char *result;
+  int result_size, result_index;
+
+  result_index = result_size = 0;
+  if (result = strchr (string, '~'))
+    result = (char *)xmalloc (result_size = (strlen (string) + 16));
+  else
+    result = (char *)xmalloc (result_size = (strlen (string) + 1));
+
+  /* Scan through STRING expanding tildes as we come to them. */
+  while (1)
+    {
+      register int start, end;
+      char *tilde_word, *expansion;
+      int len;
+
+      /* Make START point to the tilde which starts the expansion. */
+      start = tilde_find_prefix (string, &len);
+
+      /* Copy the skipped text into the result. */
+      if ((result_index + start + 1) > result_size)
+	result = (char *)xrealloc (result, 1 + (result_size += (start + 20)));
+
+      strncpy (result + result_index, string, start);
+      result_index += start;
+
+      /* Advance STRING to the starting tilde. */
+      string += start;
+
+      /* Make END be the index of one after the last character of the
+	 username. */
+      end = tilde_find_suffix (string);
+
+      /* If both START and END are zero, we are all done. */
+      if (!start && !end)
+	break;
+
+      /* Expand the entire tilde word, and copy it into RESULT. */
+      tilde_word = (char *)xmalloc (1 + end);
+      strncpy (tilde_word, string, end);
+      tilde_word[end] = '\0';
+      string += end;
+
+      expansion = tilde_expand_word (tilde_word);
+
+      if (expansion == 0)
+	expansion = tilde_word;
+      else
+	xfree (tilde_word);	
+
+      len = strlen (expansion);
+#ifdef __CYGWIN__
+      /* Fix for Cygwin to prevent ~user/xxx from expanding to //xxx when
+	 $HOME for `user' is /.  On cygwin, // denotes a network drive. */
+      if (len > 1 || *expansion != '/' || *string != '/')
+#endif
+	{
+	  if ((result_index + len + 1) > result_size)
+	    result = (char *)xrealloc (result, 1 + (result_size += (len + 20)));
+
+	  strcpy (result + result_index, expansion);
+	  result_index += len;
+	}
+      xfree (expansion);
+    }
+
+  result[result_index] = '\0';
+
+  return (result);
+}
+
+/* Take FNAME and return the tilde prefix we want expanded.  If LENP is
+   non-null, the index of the end of the prefix into FNAME is returned in
+   the location it points to. */
+static char *
+isolate_tilde_prefix (const char *fname, int *lenp)
+{
+  char *ret;
+  int i;
+
+  ret = (char *)xmalloc (strlen (fname));
+#if defined (__MSDOS__)
+  for (i = 1; fname[i] && fname[i] != '/' && fname[i] != '\\'; i++)
+#else
+  for (i = 1; fname[i] && fname[i] != '/'; i++)
+#endif
+    ret[i - 1] = fname[i];
+  ret[i - 1] = '\0';
+  if (lenp)
+    *lenp = i;
+  return ret;
+}
+
+#if 0
+/* Public function to scan a string (FNAME) beginning with a tilde and find
+   the portion of the string that should be passed to the tilde expansion
+   function.  Right now, it just calls tilde_find_suffix and allocates new
+   memory, but it can be expanded to do different things later. */
+char *
+tilde_find_word (const char *fname, int flags, int *lenp)
+{
+  int x;
+  char *r;
+
+  x = tilde_find_suffix (fname);
+  if (x == 0)
+    {
+      r = savestring (fname);
+      if (lenp)
+	*lenp = 0;
+    }
+  else
+    {
+      r = (char *)xmalloc (1 + x);
+      strncpy (r, fname, x);
+      r[x] = '\0';
+      if (lenp)
+	*lenp = x;
+    }
+
+  return r;
+}
+#endif
+
+/* Return a string that is PREFIX concatenated with SUFFIX starting at
+   SUFFIND. */
+static char *
+glue_prefix_and_suffix (char *prefix, const char *suffix, int suffind)
+{
+  char *ret;
+  int plen, slen;
+
+  plen = (prefix && *prefix) ? strlen (prefix) : 0;
+  slen = strlen (suffix + suffind);
+  ret = (char *)xmalloc (plen + slen + 1);
+  if (plen)
+    strcpy (ret, prefix);
+  strcpy (ret + plen, suffix + suffind);
+  return ret;
+}
+
+/* Do the work of tilde expansion on FILENAME.  FILENAME starts with a
+   tilde.  If there is no expansion, call tilde_expansion_failure_hook.
+   This always returns a newly-allocated string, never static storage. */
+char *
+tilde_expand_word (const char *filename)
+{
+  char *dirname, *expansion, *username;
+  int user_len;
+  struct passwd *user_entry;
+
+  if (filename == 0)
+    return ((char *)NULL);
+
+  if (*filename != '~')
+    return (savestring (filename));
+
+  /* A leading `~/' or a bare `~' is *always* translated to the value of
+     $HOME or the home directory of the current user, regardless of any
+     preexpansion hook. */
+  if (filename[1] == '\0' || filename[1] == '/')
+    {
+      /* Prefix $HOME to the rest of the string. */
+      expansion = sh_get_env_value ("HOME");
+#if defined (_WIN32)
+      if (expansion == 0)
+	expansion = sh_get_env_value ("APPDATA");
+#endif
+
+      /* If there is no HOME variable, look up the directory in
+	 the password database. */
+      if (expansion == 0)
+	expansion = sh_get_home_dir ();
+
+      return (glue_prefix_and_suffix (expansion, filename, 1));
+    }
+
+  username = isolate_tilde_prefix (filename, &user_len);
+
+  if (tilde_expansion_preexpansion_hook)
+    {
+      expansion = (*tilde_expansion_preexpansion_hook) (username);
+      if (expansion)
+	{
+	  dirname = glue_prefix_and_suffix (expansion, filename, user_len);
+	  xfree (username);
+	  xfree (expansion);
+	  return (dirname);
+	}
+    }
+
+  /* No preexpansion hook, or the preexpansion hook failed.  Look in the
+     password database. */
+  dirname = (char *)NULL;
+#if defined (HAVE_GETPWNAM)
+  user_entry = getpwnam (username);
+#else
+  user_entry = 0;
+#endif
+  if (user_entry == 0)
+    {
+      /* If the calling program has a special syntax for expanding tildes,
+	 and we couldn't find a standard expansion, then let them try. */
+      if (tilde_expansion_failure_hook)
+	{
+	  expansion = (*tilde_expansion_failure_hook) (username);
+	  if (expansion)
+	    {
+	      dirname = glue_prefix_and_suffix (expansion, filename, user_len);
+	      xfree (expansion);
+	    }
+	}
+      /* If we don't have a failure hook, or if the failure hook did not
+	 expand the tilde, return a copy of what we were passed. */
+      if (dirname == 0)
+	dirname = savestring (filename);
+    }
+#if defined (HAVE_GETPWENT)
+  else
+    dirname = glue_prefix_and_suffix (user_entry->pw_dir, filename, user_len);
+#endif
+
+  xfree (username);
+#if defined (HAVE_GETPWENT)
+  endpwent ();
+#endif
+  return (dirname);
+}
+
+
+#if defined (TEST)
+#undef NULL
+#include <stdio.h>
+
+main (int argc, char **argv)
+{
+  char *result, line[512];
+  int done = 0;
+
+  while (!done)
+    {
+      printf ("~expand: ");
+      fflush (stdout);
+
+      if (!gets (line))
+	strcpy (line, "done");
+
+      if ((strcmp (line, "done") == 0) ||
+	  (strcmp (line, "quit") == 0) ||
+	  (strcmp (line, "exit") == 0))
+	{
+	  done = 1;
+	  break;
+	}
+
+      result = tilde_expand (line);
+      printf ("  --> %s\n", result);
+      free (result);
+    }
+  exit (0);
+}
+
+static void memory_error_and_abort (void);
+
+static void *
+xmalloc (size_t bytes)
+{
+  void *temp = (char *)malloc (bytes);
+
+  if (!temp)
+    memory_error_and_abort ();
+  return (temp);
+}
+
+static void *
+xrealloc (void *pointer, int bytes)
+{
+  void *temp;
+
+  if (!pointer)
+    temp = malloc (bytes);
+  else
+    temp = realloc (pointer, bytes);
+
+  if (!temp)
+    memory_error_and_abort ();
+
+  return (temp);
+}
+
+static void
+memory_error_and_abort (void)
+{
+  fprintf (stderr, "readline: out of virtual memory\n");
+  abort ();
+}
+
+/*
+ * Local variables:
+ * compile-command: "gcc -g -DTEST -o tilde tilde.c"
+ * end:
+ */
+#endif /* TEST */
diff --git a/lib/tilde/tilde.h b/lib/tilde/tilde.h
new file mode 100644
index 0000000..e26dd04
--- /dev/null
+++ b/lib/tilde/tilde.h
@@ -0,0 +1,80 @@
+/* tilde.h: Externally available variables and function in libtilde.a. */
+
+/* Copyright (C) 1992-2009 Free Software Foundation, Inc.
+
+   This file contains the Readline Library (Readline), a set of
+   routines for providing Emacs style line input to programs that ask
+   for it.
+
+   Readline is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Readline is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Readline.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_TILDE_H_)
+#  define _TILDE_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* A function can be defined using prototypes and compile on both ANSI C
+   and traditional C compilers with something like this:
+	extern char *func PARAMS((char *, char *, int)); */
+
+#if !defined (PARAMS)
+#  if defined (__STDC__) || defined (__GNUC__) || defined (__cplusplus)
+#    define PARAMS(protos) protos
+#  else
+#    define PARAMS(protos) ()
+#  endif
+#endif
+
+typedef char *tilde_hook_func_t PARAMS((char *));
+
+/* If non-null, this contains the address of a function that the application
+   wants called before trying the standard tilde expansions.  The function
+   is called with the text sans tilde, and returns a malloc()'ed string
+   which is the expansion, or a NULL pointer if the expansion fails. */
+extern tilde_hook_func_t *tilde_expansion_preexpansion_hook;
+
+/* If non-null, this contains the address of a function to call if the
+   standard meaning for expanding a tilde fails.  The function is called
+   with the text (sans tilde, as in "foo"), and returns a malloc()'ed string
+   which is the expansion, or a NULL pointer if there is no expansion. */
+extern tilde_hook_func_t *tilde_expansion_failure_hook;
+
+/* When non-null, this is a NULL terminated array of strings which
+   are duplicates for a tilde prefix.  Bash uses this to expand
+   `=~' and `:~'. */
+extern char **tilde_additional_prefixes;
+
+/* When non-null, this is a NULL terminated array of strings which match
+   the end of a username, instead of just "/".  Bash sets this to
+   `:' and `=~'. */
+extern char **tilde_additional_suffixes;
+
+/* Return a new string which is the result of tilde expanding STRING. */
+extern char *tilde_expand PARAMS((const char *));
+
+/* Do the work of tilde expansion on FILENAME.  FILENAME starts with a
+   tilde.  If there is no expansion, call tilde_expansion_failure_hook. */
+extern char *tilde_expand_word PARAMS((const char *));
+
+/* Find the portion of the string beginning with ~ that should be expanded. */
+extern char *tilde_find_word PARAMS((const char *, int, int *));
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _TILDE_H_ */
diff --git a/list.c b/list.c
new file mode 100644
index 0000000..88835f5
--- /dev/null
+++ b/list.c
@@ -0,0 +1,136 @@
+/* list.c - Functions for manipulating linked lists of objects. */
+
+/* Copyright (C) 1996-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include "shell.h"
+
+/* A global variable which acts as a sentinel for an `error' list return. */
+GENERIC_LIST global_error_list;
+
+#ifdef INCLUDE_UNUSED
+/* Call FUNCTION on every member of LIST, a generic list. */
+void
+list_walk (list, function)
+     GENERIC_LIST *list;
+     sh_glist_func_t *function;
+{
+  for ( ; list; list = list->next)
+    if ((*function) (list) < 0)
+      return;
+}
+
+/* Call FUNCTION on every string in WORDS. */
+void
+wlist_walk (words, function)
+     WORD_LIST *words;
+     sh_icpfunc_t *function;
+{
+  for ( ; words; words = words->next)
+    if ((*function) (words->word->word) < 0)
+      return;
+}
+#endif /* INCLUDE_UNUSED */
+
+/* Reverse the chain of structures in LIST.  Output the new head
+   of the chain.  You should always assign the output value of this
+   function to something, or you will lose the chain. */
+GENERIC_LIST *
+list_reverse (list)
+     GENERIC_LIST *list;
+{
+  register GENERIC_LIST *next, *prev;
+
+  for (prev = (GENERIC_LIST *)NULL; list; )
+    {
+      next = list->next;
+      list->next = prev;
+      prev = list;
+      list = next;
+    }
+  return (prev);
+}
+
+/* Return the number of elements in LIST, a generic list. */
+int
+list_length (list)
+     GENERIC_LIST *list;
+{
+  register int i;
+
+  for (i = 0; list; list = list->next, i++);
+  return (i);
+}
+
+/* Append TAIL to HEAD.  Return the header of the list. */
+GENERIC_LIST *
+list_append (head, tail)
+     GENERIC_LIST *head, *tail;
+{
+  register GENERIC_LIST *t_head;
+
+  if (head == 0)
+    return (tail);
+
+  for (t_head = head; t_head->next; t_head = t_head->next)
+    ;
+  t_head->next = tail;
+  return (head);
+}
+
+#ifdef INCLUDE_UNUSED
+/* Delete the element of LIST which satisfies the predicate function COMPARER.
+   Returns the element that was deleted, so you can dispose of it, or -1 if
+   the element wasn't found.  COMPARER is called with the list element and
+   then ARG.  Note that LIST contains the address of a variable which points
+   to the list.  You might call this function like this:
+
+   SHELL_VAR *elt = list_remove (&variable_list, check_var_has_name, "foo");
+   dispose_variable (elt);
+*/
+GENERIC_LIST *
+list_remove (list, comparer, arg)
+     GENERIC_LIST **list;
+     Function *comparer;
+     char *arg;
+{
+  register GENERIC_LIST *prev, *temp;
+
+  for (prev = (GENERIC_LIST *)NULL, temp = *list; temp; prev = temp, temp = temp->next)
+    {
+      if ((*comparer) (temp, arg))
+	{
+	  if (prev)
+	    prev->next = temp->next;
+	  else
+	    *list = temp->next;
+	  return (temp);
+	}
+    }
+  return ((GENERIC_LIST *)&global_error_list);
+}
+#endif
diff --git a/locale.c b/locale.c
new file mode 100644
index 0000000..17ccc58
--- /dev/null
+++ b/locale.c
@@ -0,0 +1,641 @@
+/* locale.c - Miscellaneous internationalization functions. */
+
+/* Copyright (C) 1996-2009,2012,2016,2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include "bashtypes.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#if HAVE_LANGINFO_CODESET
+#  include <langinfo.h>
+#endif
+
+#include "bashintl.h"
+#include "bashansi.h"
+#include <stdio.h>
+#include "chartypes.h"
+#include <errno.h>
+
+#include "shell.h"
+#include "input.h"	/* For bash_input */
+
+#ifndef errno
+extern int errno;
+#endif
+
+int locale_utf8locale;
+int locale_mb_cur_max;	/* value of MB_CUR_MAX for current locale (LC_CTYPE) */
+int locale_shiftstates = 0;
+
+extern int dump_translatable_strings, dump_po_strings;
+
+/* The current locale when the program begins */
+static char *default_locale;
+
+/* The current domain for textdomain(3). */
+static char *default_domain;
+static char *default_dir;
+
+/* tracks the value of LC_ALL; used to override values for other locale
+   categories */
+static char *lc_all;
+
+/* tracks the value of LC_ALL; used to provide defaults for locale
+   categories */
+static char *lang;
+
+/* Called to reset all of the locale variables to their appropriate values
+   if (and only if) LC_ALL has not been assigned a value. */
+static int reset_locale_vars PARAMS((void));
+
+static void locale_setblanks PARAMS((void));
+static int locale_isutf8 PARAMS((char *));
+
+/* Set the value of default_locale and make the current locale the
+   system default locale.  This should be called very early in main(). */
+void
+set_default_locale ()
+{
+#if defined (HAVE_SETLOCALE)
+  default_locale = setlocale (LC_ALL, "");
+  if (default_locale)
+    default_locale = savestring (default_locale);
+#else
+  default_locale = savestring ("C");
+#endif /* HAVE_SETLOCALE */
+  bindtextdomain (PACKAGE, LOCALEDIR);
+  textdomain (PACKAGE);
+
+  locale_mb_cur_max = MB_CUR_MAX;
+  locale_utf8locale = locale_isutf8 (default_locale);
+#if defined (HANDLE_MULTIBYTE)
+  locale_shiftstates = mblen ((char *)NULL, 0);
+#else
+  local_shiftstates = 0;
+#endif
+}
+
+/* Set default values for LC_CTYPE, LC_COLLATE, LC_MESSAGES, LC_NUMERIC and
+   LC_TIME if they are not specified in the environment, but LC_ALL is.  This
+   should be called from main() after parsing the environment. */
+void
+set_default_locale_vars ()
+{
+  char *val;
+
+#if defined (HAVE_SETLOCALE)
+
+#  if defined (LC_CTYPE)
+  val = get_string_value ("LC_CTYPE");
+  if (val == 0 && lc_all && *lc_all)
+    {
+      setlocale (LC_CTYPE, lc_all);
+      locale_setblanks ();
+      locale_mb_cur_max = MB_CUR_MAX;
+      locale_utf8locale = locale_isutf8 (lc_all);
+
+#    if defined (HANDLE_MULTIBYTE)
+      locale_shiftstates = mblen ((char *)NULL, 0);
+#    else
+      local_shiftstates = 0;
+#    endif
+
+      u32reset ();
+    }
+#  endif
+
+#  if defined (LC_COLLATE)
+  val = get_string_value ("LC_COLLATE");
+  if (val == 0 && lc_all && *lc_all)
+    setlocale (LC_COLLATE, lc_all);
+#  endif /* LC_COLLATE */
+
+#  if defined (LC_MESSAGES)
+  val = get_string_value ("LC_MESSAGES");
+  if (val == 0 && lc_all && *lc_all)
+    setlocale (LC_MESSAGES, lc_all);
+#  endif /* LC_MESSAGES */
+
+#  if defined (LC_NUMERIC)
+  val = get_string_value ("LC_NUMERIC");
+  if (val == 0 && lc_all && *lc_all)
+    setlocale (LC_NUMERIC, lc_all);
+#  endif /* LC_NUMERIC */
+
+#  if defined (LC_TIME)
+  val = get_string_value ("LC_TIME");
+  if (val == 0 && lc_all && *lc_all)
+    setlocale (LC_TIME, lc_all);
+#  endif /* LC_TIME */
+
+#endif /* HAVE_SETLOCALE */
+
+  val = get_string_value ("TEXTDOMAIN");
+  if (val && *val)
+    {
+      FREE (default_domain);
+      default_domain = savestring (val);
+      if (default_dir && *default_dir)
+	bindtextdomain (default_domain, default_dir);
+    }
+
+  val = get_string_value ("TEXTDOMAINDIR");
+  if (val && *val)
+    {
+      FREE (default_dir);
+      default_dir = savestring (val);
+      if (default_domain && *default_domain)
+	bindtextdomain (default_domain, default_dir);
+    }
+}
+
+/* Set one of the locale categories (specified by VAR) to VALUE.  Returns 1
+  if successful, 0 otherwise. */
+int
+set_locale_var (var, value)
+     char *var, *value;
+{
+  int r;
+  char *x;
+
+  x = "";
+  errno = 0;
+  if (var[0] == 'T' && var[10] == 0)		/* TEXTDOMAIN */
+    {
+      FREE (default_domain);
+      default_domain = value ? savestring (value) : (char *)NULL;
+      if (default_dir && *default_dir)
+	bindtextdomain (default_domain, default_dir);
+      return (1);
+    }
+  else if (var[0] == 'T')			/* TEXTDOMAINDIR */
+    {
+      FREE (default_dir);
+      default_dir = value ? savestring (value) : (char *)NULL;
+      if (default_domain && *default_domain)
+	bindtextdomain (default_domain, default_dir);
+      return (1);
+    }
+
+  /* var[0] == 'L' && var[1] == 'C' && var[2] == '_' */
+
+  else if (var[3] == 'A')			/* LC_ALL */
+    {
+      FREE (lc_all);
+      if (value)
+	lc_all = savestring (value);
+      else
+	{
+	  lc_all = (char *)xmalloc (1);
+	  lc_all[0] = '\0';
+	}
+#if defined (HAVE_SETLOCALE)
+      r = *lc_all ? ((x = setlocale (LC_ALL, lc_all)) != 0) : reset_locale_vars ();
+      if (x == 0)
+	{
+	  if (errno == 0)
+	    internal_warning(_("setlocale: LC_ALL: cannot change locale (%s)"), lc_all);
+	  else
+	    internal_warning(_("setlocale: LC_ALL: cannot change locale (%s): %s"), lc_all, strerror (errno));
+	}
+      locale_setblanks ();
+      locale_mb_cur_max = MB_CUR_MAX;
+      /* if LC_ALL == "", reset_locale_vars has already called this */
+      if (*lc_all && x)
+	locale_utf8locale = locale_isutf8 (lc_all);
+#  if defined (HANDLE_MULTIBYTE)
+      locale_shiftstates = mblen ((char *)NULL, 0);
+#  else
+      local_shiftstates = 0;
+#  endif
+      u32reset ();
+      return r;
+#else
+      return (1);
+#endif
+    }
+
+#if defined (HAVE_SETLOCALE)
+  else if (var[3] == 'C' && var[4] == 'T')	/* LC_CTYPE */
+    {
+#  if defined (LC_CTYPE)
+      if (lc_all == 0 || *lc_all == '\0')
+	{
+	  x = setlocale (LC_CTYPE, get_locale_var ("LC_CTYPE"));
+	  locale_setblanks ();
+	  locale_mb_cur_max = MB_CUR_MAX;
+	  /* if setlocale() returns NULL, the locale is not changed */
+	  if (x)
+	    locale_utf8locale = locale_isutf8 (x);
+#if defined (HANDLE_MULTIBYTE)
+	  locale_shiftstates = mblen ((char *)NULL, 0);
+#else
+	  local_shiftstates = 0;
+#endif
+	  u32reset ();
+	}
+#  endif
+    }
+  else if (var[3] == 'C' && var[4] == 'O')	/* LC_COLLATE */
+    {
+#  if defined (LC_COLLATE)
+      if (lc_all == 0 || *lc_all == '\0')
+	x = setlocale (LC_COLLATE, get_locale_var ("LC_COLLATE"));
+#  endif /* LC_COLLATE */
+    }
+  else if (var[3] == 'M' && var[4] == 'E')	/* LC_MESSAGES */
+    {
+#  if defined (LC_MESSAGES)
+      if (lc_all == 0 || *lc_all == '\0')
+	x = setlocale (LC_MESSAGES, get_locale_var ("LC_MESSAGES"));
+#  endif /* LC_MESSAGES */
+    }
+  else if (var[3] == 'N' && var[4] == 'U')	/* LC_NUMERIC */
+    {
+#  if defined (LC_NUMERIC)
+      if (lc_all == 0 || *lc_all == '\0')
+	x = setlocale (LC_NUMERIC, get_locale_var ("LC_NUMERIC"));
+#  endif /* LC_NUMERIC */
+    }
+  else if (var[3] == 'T' && var[4] == 'I')	/* LC_TIME */
+    {
+#  if defined (LC_TIME)
+      if (lc_all == 0 || *lc_all == '\0')
+	x = setlocale (LC_TIME, get_locale_var ("LC_TIME"));
+#  endif /* LC_TIME */
+    }
+#endif /* HAVE_SETLOCALE */
+  
+  if (x == 0)
+    {
+      if (errno == 0)
+	internal_warning(_("setlocale: %s: cannot change locale (%s)"), var, get_locale_var (var));
+      else
+	internal_warning(_("setlocale: %s: cannot change locale (%s): %s"), var, get_locale_var (var), strerror (errno));
+    }
+
+  return (x != 0);
+}
+
+/* Called when LANG is assigned a value.  Tracks value in `lang'.  Calls
+   reset_locale_vars() to reset any default values if LC_ALL is unset or
+   null. */
+int
+set_lang (var, value)
+     char *var, *value;
+{
+  FREE (lang);
+  if (value)
+    lang = savestring (value);
+  else
+    {
+      lang = (char *)xmalloc (1);
+      lang[0] = '\0';
+    }
+
+  return ((lc_all == 0 || *lc_all == 0) ? reset_locale_vars () : 0);
+}
+
+/* Set default values for LANG and LC_ALL.  Default values for all other
+   locale-related variables depend on these. */
+void
+set_default_lang ()
+{
+  char *v;
+
+  v = get_string_value ("LC_ALL");
+  set_locale_var ("LC_ALL", v);
+
+  v = get_string_value ("LANG");
+  set_lang ("LANG", v);
+}
+
+/* Get the value of one of the locale variables (LC_MESSAGES, LC_CTYPE).
+   The precedence is as POSIX.2 specifies:  LC_ALL has precedence over
+   the specific locale variables, and LANG, if set, is used as the default. */
+char *
+get_locale_var (var)
+     char *var;
+{
+  char *locale;
+
+  locale = lc_all;
+
+  if (locale == 0 || *locale == 0)
+    locale = get_string_value (var);	/* XXX - no mem leak */
+  if (locale == 0 || *locale == 0)
+    locale = lang;
+  if (locale == 0 || *locale == 0)
+#if 0
+    locale = default_locale;	/* system-dependent; not really portable.  should it be "C"? */
+#else
+    locale = "";
+#endif
+  return (locale);
+}
+
+/* Called to reset all of the locale variables to their appropriate values
+   if (and only if) LC_ALL has not been assigned a value.  DO NOT CALL THIS
+   IF LC_ALL HAS BEEN ASSIGNED A VALUE. */
+static int
+reset_locale_vars ()
+{
+  char *t, *x;
+#if defined (HAVE_SETLOCALE)
+  if (lang == 0 || *lang == '\0')
+    maybe_make_export_env ();		/* trust that this will change environment for setlocale */
+  if (setlocale (LC_ALL, lang ? lang : "") == 0)
+    return 0;
+
+  x = 0;
+#  if defined (LC_CTYPE)
+  x = setlocale (LC_CTYPE, get_locale_var ("LC_CTYPE"));
+#  endif
+#  if defined (LC_COLLATE)
+  t = setlocale (LC_COLLATE, get_locale_var ("LC_COLLATE"));
+#  endif
+#  if defined (LC_MESSAGES)
+  t = setlocale (LC_MESSAGES, get_locale_var ("LC_MESSAGES"));
+#  endif
+#  if defined (LC_NUMERIC)
+  t = setlocale (LC_NUMERIC, get_locale_var ("LC_NUMERIC"));
+#  endif
+#  if defined (LC_TIME)
+  t = setlocale (LC_TIME, get_locale_var ("LC_TIME"));
+#  endif
+
+  locale_setblanks ();  
+  locale_mb_cur_max = MB_CUR_MAX;
+  if (x)
+    locale_utf8locale = locale_isutf8 (x);
+#  if defined (HANDLE_MULTIBYTE)
+  locale_shiftstates = mblen ((char *)NULL, 0);
+#  else
+  local_shiftstates = 0;
+#  endif
+  u32reset ();
+#endif
+  return 1;
+}
+
+/* Translate the contents of STRING, a $"..." quoted string, according
+   to the current locale.  In the `C' or `POSIX' locale, or if gettext()
+   is not available, the passed string is returned unchanged.  The
+   length of the translated string is returned in LENP, if non-null. */
+char *
+localetrans (string, len, lenp)
+     char *string;
+     int len, *lenp;
+{
+  char *locale, *t;
+  char *translated;
+  int tlen;
+
+  /* Don't try to translate null strings. */
+  if (string == 0 || *string == 0)
+    {
+      if (lenp)
+	*lenp = 0;
+      return ((char *)NULL);
+    }
+
+  locale = get_locale_var ("LC_MESSAGES");
+
+  /* If we don't have setlocale() or the current locale is `C' or `POSIX',
+     just return the string.  If we don't have gettext(), there's no use
+     doing anything else. */
+  if (locale == 0 || locale[0] == '\0' ||
+      (locale[0] == 'C' && locale[1] == '\0') || STREQ (locale, "POSIX"))
+    {
+      t = (char *)xmalloc (len + 1);
+      strcpy (t, string);
+      if (lenp)
+	*lenp = len;
+      return (t);
+    }
+
+  /* Now try to translate it. */
+  if (default_domain && *default_domain)
+    translated = dgettext (default_domain, string);
+  else
+    translated = string;
+
+  if (translated == string)	/* gettext returns its argument if untranslatable */
+    {
+      t = (char *)xmalloc (len + 1);
+      strcpy (t, string);
+      if (lenp)
+	*lenp = len;
+    }
+  else
+    {
+      tlen = strlen (translated);
+      t = (char *)xmalloc (tlen + 1);
+      strcpy (t, translated);
+      if (lenp)
+	*lenp = tlen;
+    }
+  return (t);
+}
+
+/* Change a bash string into a string suitable for inclusion in a `po' file.
+   This backslash-escapes `"' and `\' and changes newlines into \\\n"\n". */
+char *
+mk_msgstr (string, foundnlp)
+     char *string;
+     int *foundnlp;
+{
+  register int c, len;
+  char *result, *r, *s;
+
+  for (len = 0, s = string; s && *s; s++)
+    {
+      len++;
+      if (*s == '"' || *s == '\\')
+	len++;
+      else if (*s == '\n')
+	len += 5;
+    }
+  
+  r = result = (char *)xmalloc (len + 3);
+  *r++ = '"';
+
+  for (s = string; s && (c = *s); s++)
+    {
+      if (c == '\n')	/* <NL> -> \n"<NL>" */
+	{
+	  *r++ = '\\';
+	  *r++ = 'n';
+	  *r++ = '"';
+	  *r++ = '\n';
+	  *r++ = '"';
+	  if (foundnlp)
+	    *foundnlp = 1;
+	  continue;
+	}
+      if (c == '"' || c == '\\')
+	*r++ = '\\';
+      *r++ = c;
+    }
+
+  *r++ = '"';
+  *r++ = '\0';
+
+  return result;
+}
+
+/* $"..." -- Translate the portion of STRING between START and END
+   according to current locale using gettext (if available) and return
+   the result.  The caller will take care of leaving the quotes intact.
+   The string will be left without the leading `$' by the caller.
+   If translation is performed, the translated string will be double-quoted
+   by the caller.  The length of the translated string is returned in LENP,
+   if non-null. */
+char *
+localeexpand (string, start, end, lineno, lenp)
+     char *string;
+     int start, end, lineno, *lenp;
+{
+  int len, tlen, foundnl;
+  char *temp, *t, *t2;
+
+  temp = (char *)xmalloc (end - start + 1);
+  for (tlen = 0, len = start; len < end; )
+    temp[tlen++] = string[len++];
+  temp[tlen] = '\0';
+
+  /* If we're just dumping translatable strings, don't do anything with the
+     string itself, but if we're dumping in `po' file format, convert it into
+     a form more palatable to gettext(3) and friends by quoting `"' and `\'
+     with backslashes and converting <NL> into `\n"<NL>"'.  If we find a
+     newline in TEMP, we first output a `msgid ""' line and then the
+     translated string; otherwise we output the `msgid' and translated
+     string all on one line. */
+  if (dump_translatable_strings)
+    {
+      if (dump_po_strings)
+	{
+	  foundnl = 0;
+	  t = mk_msgstr (temp, &foundnl);
+	  t2 = foundnl ? "\"\"\n" : "";
+
+	  printf ("#: %s:%d\nmsgid %s%s\nmsgstr \"\"\n",
+			yy_input_name (), lineno, t2, t);
+	  free (t);
+	}
+      else
+	printf ("\"%s\"\n", temp);
+
+      if (lenp)
+	*lenp = tlen;
+      return (temp);
+    }
+  else if (*temp)
+    {
+      t = localetrans (temp, tlen, &len);
+      free (temp);
+      if (lenp)
+	*lenp = len;
+      return (t);
+    }
+  else
+    {
+      if (lenp)
+	*lenp = 0;
+      return (temp);
+    }
+}
+
+/* Set every character in the <blank> character class to be a shell break
+   character for the lexical analyzer when the locale changes. */
+static void
+locale_setblanks ()
+{
+  int x;
+
+  for (x = 0; x < sh_syntabsiz; x++)
+    {
+      if (isblank ((unsigned char)x))
+	sh_syntaxtab[x] |= CSHBRK|CBLANK;
+      else if (member (x, shell_break_chars))
+	{
+	  sh_syntaxtab[x] |= CSHBRK;
+	  sh_syntaxtab[x] &= ~CBLANK;
+	}
+      else
+	sh_syntaxtab[x] &= ~(CSHBRK|CBLANK);
+    }
+}
+
+/* Parse a locale specification
+     language[_territory][.codeset][@modifier][+special][,[sponsor][_revision]]
+   and return TRUE if the codeset is UTF-8 or utf8 */
+static int
+locale_isutf8 (lspec)
+     char *lspec;
+{
+  char *cp, *encoding;
+
+#if HAVE_LANGINFO_CODESET
+  cp = nl_langinfo (CODESET);
+  return (STREQ (cp, "UTF-8") || STREQ (cp, "utf8"));
+#elif HAVE_LOCALE_CHARSET
+  cp = locale_charset ();
+  return (STREQ (cp, "UTF-8") || STREQ (cp, "utf8"));
+#else
+  /* Take a shot */
+  for (cp = lspec; *cp && *cp != '@' && *cp != '+' && *cp != ','; cp++)
+    {
+      if (*cp == '.')
+	{
+	  for (encoding = ++cp; *cp && *cp != '@' && *cp != '+' && *cp != ','; cp++)
+	    ;
+	  /* The encoding (codeset) is the substring between encoding and cp */
+	  if ((cp - encoding == 5 && STREQN (encoding, "UTF-8", 5)) ||
+	      (cp - encoding == 4 && STREQN (encoding, "utf8", 4)))
+	    return 1;
+	  else
+	    return 0;
+	}
+    }
+  return 0;
+#endif
+}
+
+#if defined (HAVE_LOCALECONV)
+int
+locale_decpoint ()
+{
+  struct lconv *lv;
+
+  lv = localeconv ();
+  return (lv && lv->decimal_point && lv->decimal_point[0]) ? lv->decimal_point[0] : '.';
+}
+#else
+#  undef locale_decpoint
+int
+locale_decpoint ()
+{
+  return '.';
+}
+#endif
diff --git a/m4/codeset.m4 b/m4/codeset.m4
new file mode 100644
index 0000000..280f556
--- /dev/null
+++ b/m4/codeset.m4
@@ -0,0 +1,24 @@
+# codeset.m4 serial 5 (gettext-0.18.2)
+dnl Copyright (C) 2000-2002, 2006, 2008-2014, 2016, 2019 Free Software
+dnl Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([AM_LANGINFO_CODESET],
+[
+  AC_CACHE_CHECK([for nl_langinfo and CODESET], [am_cv_langinfo_codeset],
+    [AC_LINK_IFELSE(
+       [AC_LANG_PROGRAM(
+          [[#include <langinfo.h>]],
+          [[char* cs = nl_langinfo(CODESET); return !cs;]])],
+       [am_cv_langinfo_codeset=yes],
+       [am_cv_langinfo_codeset=no])
+    ])
+  if test $am_cv_langinfo_codeset = yes; then
+    AC_DEFINE([HAVE_LANGINFO_CODESET], [1],
+      [Define if you have <langinfo.h> and nl_langinfo(CODESET).])
+  fi
+])
diff --git a/m4/extern-inline.m4 b/m4/extern-inline.m4
new file mode 100644
index 0000000..ec9f221
--- /dev/null
+++ b/m4/extern-inline.m4
@@ -0,0 +1,114 @@
+dnl 'extern inline' a la ISO C99.
+
+dnl Copyright 2012-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+AC_DEFUN([gl_EXTERN_INLINE],
+[
+  AH_VERBATIM([extern_inline],
+[/* Please see the Gnulib manual for how to use these macros.
+
+   Suppress extern inline with HP-UX cc, as it appears to be broken; see
+   <https://lists.gnu.org/r/bug-texinfo/2013-02/msg00030.html>.
+
+   Suppress extern inline with Sun C in standards-conformance mode, as it
+   mishandles inline functions that call each other.  E.g., for 'inline void f
+   (void) { } inline void g (void) { f (); }', c99 incorrectly complains
+   'reference to static identifier "f" in extern inline function'.
+   This bug was observed with Sun C 5.12 SunOS_i386 2011/11/16.
+
+   Suppress extern inline (with or without __attribute__ ((__gnu_inline__)))
+   on configurations that mistakenly use 'static inline' to implement
+   functions or macros in standard C headers like <ctype.h>.  For example,
+   if isdigit is mistakenly implemented via a static inline function,
+   a program containing an extern inline function that calls isdigit
+   may not work since the C standard prohibits extern inline functions
+   from calling static functions (ISO C 99 section 6.7.4.(3).
+   This bug is known to occur on:
+
+     OS X 10.8 and earlier; see:
+     https://lists.gnu.org/r/bug-gnulib/2012-12/msg00023.html
+
+     DragonFly; see
+     http://muscles.dragonflybsd.org/bulk/bleeding-edge-potential/latest-per-pkg/ah-tty-0.3.12.log
+
+     FreeBSD; see:
+     https://lists.gnu.org/r/bug-gnulib/2014-07/msg00104.html
+
+   OS X 10.9 has a macro __header_inline indicating the bug is fixed for C and
+   for clang but remains for g++; see <https://trac.macports.org/ticket/41033>.
+   Assume DragonFly and FreeBSD will be similar.
+
+   GCC 4.3 and above with -std=c99 or -std=gnu99 implements ISO C99
+   inline semantics, unless -fgnu89-inline is used.  It defines a macro
+   __GNUC_STDC_INLINE__ to indicate this situation or a macro
+   __GNUC_GNU_INLINE__ to indicate the opposite situation.
+   GCC 4.2 with -std=c99 or -std=gnu99 implements the GNU C inline
+   semantics but warns, unless -fgnu89-inline is used:
+     warning: C99 inline functions are not supported; using GNU89
+     warning: to disable this warning use -fgnu89-inline or the gnu_inline function attribute
+   It defines a macro __GNUC_GNU_INLINE__ to indicate this situation.
+ */
+#if (((defined __APPLE__ && defined __MACH__) \
+      || defined __DragonFly__ || defined __FreeBSD__) \
+     && (defined __header_inline \
+         ? (defined __cplusplus && defined __GNUC_STDC_INLINE__ \
+            && ! defined __clang__) \
+         : ((! defined _DONT_USE_CTYPE_INLINE_ \
+             && (defined __GNUC__ || defined __cplusplus)) \
+            || (defined _FORTIFY_SOURCE && 0 < _FORTIFY_SOURCE \
+                && defined __GNUC__ && ! defined __cplusplus))))
+# define _GL_EXTERN_INLINE_STDHEADER_BUG
+#endif
+#if ((__GNUC__ \
+      ? defined __GNUC_STDC_INLINE__ && __GNUC_STDC_INLINE__ \
+      : (199901L <= __STDC_VERSION__ \
+         && !defined __HP_cc \
+         && !defined __PGI \
+         && !(defined __SUNPRO_C && __STDC__))) \
+     && !defined _GL_EXTERN_INLINE_STDHEADER_BUG)
+# define _GL_INLINE inline
+# define _GL_EXTERN_INLINE extern inline
+# define _GL_EXTERN_INLINE_IN_USE
+#elif (2 < __GNUC__ + (7 <= __GNUC_MINOR__) && !defined __STRICT_ANSI__ \
+       && !defined _GL_EXTERN_INLINE_STDHEADER_BUG)
+# if defined __GNUC_GNU_INLINE__ && __GNUC_GNU_INLINE__
+   /* __gnu_inline__ suppresses a GCC 4.2 diagnostic.  */
+#  define _GL_INLINE extern inline __attribute__ ((__gnu_inline__))
+# else
+#  define _GL_INLINE extern inline
+# endif
+# define _GL_EXTERN_INLINE extern
+# define _GL_EXTERN_INLINE_IN_USE
+#else
+# define _GL_INLINE static _GL_UNUSED
+# define _GL_EXTERN_INLINE static _GL_UNUSED
+#endif
+
+/* In GCC 4.6 (inclusive) to 5.1 (exclusive),
+   suppress bogus "no previous prototype for 'FOO'"
+   and "no previous declaration for 'FOO'" diagnostics,
+   when FOO is an inline function in the header; see
+   <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=54113> and
+   <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=63877>.  */
+#if __GNUC__ == 4 && 6 <= __GNUC_MINOR__
+# if defined __GNUC_STDC_INLINE__ && __GNUC_STDC_INLINE__
+#  define _GL_INLINE_HEADER_CONST_PRAGMA
+# else
+#  define _GL_INLINE_HEADER_CONST_PRAGMA \
+     _Pragma ("GCC diagnostic ignored \"-Wsuggest-attribute=const\"")
+# endif
+# define _GL_INLINE_HEADER_BEGIN \
+    _Pragma ("GCC diagnostic push") \
+    _Pragma ("GCC diagnostic ignored \"-Wmissing-prototypes\"") \
+    _Pragma ("GCC diagnostic ignored \"-Wmissing-declarations\"") \
+    _GL_INLINE_HEADER_CONST_PRAGMA
+# define _GL_INLINE_HEADER_END \
+    _Pragma ("GCC diagnostic pop")
+#else
+# define _GL_INLINE_HEADER_BEGIN
+# define _GL_INLINE_HEADER_END
+#endif])
+])
diff --git a/m4/fcntl-o.m4 b/m4/fcntl-o.m4
new file mode 100644
index 0000000..6ab3387
--- /dev/null
+++ b/m4/fcntl-o.m4
@@ -0,0 +1,139 @@
+# fcntl-o.m4 serial 6
+dnl Copyright (C) 2006, 2009-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl Written by Paul Eggert.
+
+AC_PREREQ([2.60])
+
+# Test whether the flags O_NOATIME and O_NOFOLLOW actually work.
+# Define HAVE_WORKING_O_NOATIME to 1 if O_NOATIME works, or to 0 otherwise.
+# Define HAVE_WORKING_O_NOFOLLOW to 1 if O_NOFOLLOW works, or to 0 otherwise.
+AC_DEFUN([gl_FCNTL_O_FLAGS],
+[
+  dnl Persuade glibc <fcntl.h> to define O_NOATIME and O_NOFOLLOW.
+  AC_REQUIRE([AC_USE_SYSTEM_EXTENSIONS])
+
+  AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles
+  AC_CHECK_HEADERS_ONCE([unistd.h])
+  AC_CHECK_FUNCS_ONCE([symlink])
+  AC_CACHE_CHECK([for working fcntl.h], [gl_cv_header_working_fcntl_h],
+    [AC_RUN_IFELSE(
+       [AC_LANG_PROGRAM(
+          [[#include <sys/types.h>
+           #include <sys/stat.h>
+           #if HAVE_UNISTD_H
+           # include <unistd.h>
+           #else /* on Windows with MSVC */
+           # include <io.h>
+           # include <stdlib.h>
+           # defined sleep(n) _sleep ((n) * 1000)
+           #endif
+           #include <fcntl.h>
+           #ifndef O_NOATIME
+            #define O_NOATIME 0
+           #endif
+           #ifndef O_NOFOLLOW
+            #define O_NOFOLLOW 0
+           #endif
+           static int const constants[] =
+            {
+              O_CREAT, O_EXCL, O_NOCTTY, O_TRUNC, O_APPEND,
+              O_NONBLOCK, O_SYNC, O_ACCMODE, O_RDONLY, O_RDWR, O_WRONLY
+            };
+          ]],
+          [[
+            int result = !constants;
+            #if HAVE_SYMLINK
+            {
+              static char const sym[] = "conftest.sym";
+              if (symlink ("/dev/null", sym) != 0)
+                result |= 2;
+              else
+                {
+                  int fd = open (sym, O_WRONLY | O_NOFOLLOW | O_CREAT, 0);
+                  if (fd >= 0)
+                    {
+                      close (fd);
+                      result |= 4;
+                    }
+                }
+              if (unlink (sym) != 0 || symlink (".", sym) != 0)
+                result |= 2;
+              else
+                {
+                  int fd = open (sym, O_RDONLY | O_NOFOLLOW);
+                  if (fd >= 0)
+                    {
+                      close (fd);
+                      result |= 4;
+                    }
+                }
+              unlink (sym);
+            }
+            #endif
+            {
+              static char const file[] = "confdefs.h";
+              int fd = open (file, O_RDONLY | O_NOATIME);
+              if (fd < 0)
+                result |= 8;
+              else
+                {
+                  struct stat st0;
+                  if (fstat (fd, &st0) != 0)
+                    result |= 16;
+                  else
+                    {
+                      char c;
+                      sleep (1);
+                      if (read (fd, &c, 1) != 1)
+                        result |= 24;
+                      else
+                        {
+                          if (close (fd) != 0)
+                            result |= 32;
+                          else
+                            {
+                              struct stat st1;
+                              if (stat (file, &st1) != 0)
+                                result |= 40;
+                              else
+                                if (st0.st_atime != st1.st_atime)
+                                  result |= 64;
+                            }
+                        }
+                    }
+                }
+            }
+            return result;]])],
+       [gl_cv_header_working_fcntl_h=yes],
+       [case $? in #(
+        4) gl_cv_header_working_fcntl_h='no (bad O_NOFOLLOW)';; #(
+        64) gl_cv_header_working_fcntl_h='no (bad O_NOATIME)';; #(
+        68) gl_cv_header_working_fcntl_h='no (bad O_NOATIME, O_NOFOLLOW)';; #(
+         *) gl_cv_header_working_fcntl_h='no';;
+        esac],
+       [case "$host_os" in
+                  # Guess 'no' on native Windows.
+          mingw*) gl_cv_header_working_fcntl_h='no' ;;
+          *)      gl_cv_header_working_fcntl_h=cross-compiling ;;
+        esac
+       ])
+    ])
+
+  case $gl_cv_header_working_fcntl_h in #(
+  *O_NOATIME* | no | cross-compiling) ac_val=0;; #(
+  *) ac_val=1;;
+  esac
+  AC_DEFINE_UNQUOTED([HAVE_WORKING_O_NOATIME], [$ac_val],
+    [Define to 1 if O_NOATIME works.])
+
+  case $gl_cv_header_working_fcntl_h in #(
+  *O_NOFOLLOW* | no | cross-compiling) ac_val=0;; #(
+  *) ac_val=1;;
+  esac
+  AC_DEFINE_UNQUOTED([HAVE_WORKING_O_NOFOLLOW], [$ac_val],
+    [Define to 1 if O_NOFOLLOW works.])
+])
diff --git a/m4/gettext.m4 b/m4/gettext.m4
new file mode 100644
index 0000000..fec3804
--- /dev/null
+++ b/m4/gettext.m4
@@ -0,0 +1,419 @@
+# gettext.m4 serial 69 (gettext-0.19.9)
+dnl Copyright (C) 1995-2014, 2016, 2018-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl   Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
+dnl   Bruno Haible <haible@clisp.cons.org>, 2000-2006, 2008-2010.
+
+dnl Macro to add for using GNU gettext.
+
+dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]).
+dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The
+dnl    default (if it is not specified or empty) is 'no-libtool'.
+dnl    INTLSYMBOL should be 'external' for packages with no intl directory,
+dnl    and 'no-libtool' or 'use-libtool' for packages with an intl directory.
+dnl    If INTLSYMBOL is 'use-libtool', then a libtool library
+dnl    $(top_builddir)/intl/libintl.la will be created (shared and/or static,
+dnl    depending on --{enable,disable}-{shared,static} and on the presence of
+dnl    AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library
+dnl    $(top_builddir)/intl/libintl.a will be created.
+dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext
+dnl    implementations (in libc or libintl) without the ngettext() function
+dnl    will be ignored.  If NEEDSYMBOL is specified and is
+dnl    'need-formatstring-macros', then GNU gettext implementations that don't
+dnl    support the ISO C 99 <inttypes.h> formatstring macros will be ignored.
+dnl INTLDIR is used to find the intl libraries.  If empty,
+dnl    the value '$(top_builddir)/intl/' is used.
+dnl
+dnl The result of the configuration is one of three cases:
+dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled
+dnl    and used.
+dnl    Catalog format: GNU --> install in $(datadir)
+dnl    Catalog extension: .mo after installation, .gmo in source tree
+dnl 2) GNU gettext has been found in the system's C library.
+dnl    Catalog format: GNU --> install in $(datadir)
+dnl    Catalog extension: .mo after installation, .gmo in source tree
+dnl 3) No internationalization, always use English msgid.
+dnl    Catalog format: none
+dnl    Catalog extension: none
+dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur.
+dnl The use of .gmo is historical (it was needed to avoid overwriting the
+dnl GNU format catalogs when building on a platform with an X/Open gettext),
+dnl but we keep it in order not to force irrelevant filename changes on the
+dnl maintainers.
+dnl
+AC_DEFUN([AM_GNU_GETTEXT],
+[
+  dnl Argument checking.
+  ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], ,
+    [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT
+])])])])])
+  ifelse(ifelse([$1], [], [old])[]ifelse([$1], [no-libtool], [old]), [old],
+    [AC_DIAGNOSE([obsolete], [Use of AM_GNU_GETTEXT without [external] argument is deprecated.])])
+  ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], ,
+    [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT
+])])])])
+  define([gt_included_intl],
+    ifelse([$1], [external],
+      ifdef([AM_GNU_GETTEXT_][INTL_SUBDIR], [yes], [no]),
+      [yes]))
+  define([gt_libtool_suffix_prefix], ifelse([$1], [use-libtool], [l], []))
+  gt_NEEDS_INIT
+  AM_GNU_GETTEXT_NEED([$2])
+
+  AC_REQUIRE([AM_PO_SUBDIRS])dnl
+  ifelse(gt_included_intl, yes, [
+    AC_REQUIRE([AM_INTL_SUBDIR])dnl
+  ])
+
+  dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
+  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+  AC_REQUIRE([AC_LIB_RPATH])
+
+  dnl Sometimes libintl requires libiconv, so first search for libiconv.
+  dnl Ideally we would do this search only after the
+  dnl      if test "$USE_NLS" = "yes"; then
+  dnl        if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
+  dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT
+  dnl the configure script would need to contain the same shell code
+  dnl again, outside any 'if'. There are two solutions:
+  dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'.
+  dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE.
+  dnl Since AC_PROVIDE_IFELSE is not documented, we avoid it.
+  ifelse(gt_included_intl, yes, , [
+    AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
+  ])
+
+  dnl Sometimes, on Mac OS X, libintl requires linking with CoreFoundation.
+  gt_INTL_MACOSX
+
+  dnl Set USE_NLS.
+  AC_REQUIRE([AM_NLS])
+
+  ifelse(gt_included_intl, yes, [
+    BUILD_INCLUDED_LIBINTL=no
+    USE_INCLUDED_LIBINTL=no
+  ])
+  LIBINTL=
+  LTLIBINTL=
+  POSUB=
+
+  dnl Add a version number to the cache macros.
+  case " $gt_needs " in
+    *" need-formatstring-macros "*) gt_api_version=3 ;;
+    *" need-ngettext "*) gt_api_version=2 ;;
+    *) gt_api_version=1 ;;
+  esac
+  gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc"
+  gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl"
+
+  dnl If we use NLS figure out what method
+  if test "$USE_NLS" = "yes"; then
+    gt_use_preinstalled_gnugettext=no
+    ifelse(gt_included_intl, yes, [
+      AC_MSG_CHECKING([whether included gettext is requested])
+      AC_ARG_WITH([included-gettext],
+        [  --with-included-gettext use the GNU gettext library included here],
+        nls_cv_force_use_gnu_gettext=$withval,
+        nls_cv_force_use_gnu_gettext=no)
+      AC_MSG_RESULT([$nls_cv_force_use_gnu_gettext])
+
+      nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+      if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+    ])
+        dnl User does not insist on using GNU NLS library.  Figure out what
+        dnl to use.  If GNU gettext is available we use this.  Else we have
+        dnl to fall back to GNU NLS library.
+
+        if test $gt_api_version -ge 3; then
+          gt_revision_test_code='
+#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+changequote(,)dnl
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+changequote([,])dnl
+'
+        else
+          gt_revision_test_code=
+        fi
+        if test $gt_api_version -ge 2; then
+          gt_expression_test_code=' + * ngettext ("", "", 0)'
+        else
+          gt_expression_test_code=
+        fi
+
+        AC_CACHE_CHECK([for GNU gettext in libc], [$gt_func_gnugettext_libc],
+         [AC_LINK_IFELSE(
+            [AC_LANG_PROGRAM(
+               [[
+#include <libintl.h>
+#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+extern int _nl_msg_cat_cntr;
+extern int *_nl_domain_bindings;
+#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_domain_bindings)
+#else
+#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0
+#endif
+$gt_revision_test_code
+               ]],
+               [[
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION
+               ]])],
+            [eval "$gt_func_gnugettext_libc=yes"],
+            [eval "$gt_func_gnugettext_libc=no"])])
+
+        if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
+          dnl Sometimes libintl requires libiconv, so first search for libiconv.
+          ifelse(gt_included_intl, yes, , [
+            AM_ICONV_LINK
+          ])
+          dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL
+          dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv])
+          dnl because that would add "-liconv" to LIBINTL and LTLIBINTL
+          dnl even if libiconv doesn't exist.
+          AC_LIB_LINKFLAGS_BODY([intl])
+          AC_CACHE_CHECK([for GNU gettext in libintl],
+            [$gt_func_gnugettext_libintl],
+           [gt_save_CPPFLAGS="$CPPFLAGS"
+            CPPFLAGS="$CPPFLAGS $INCINTL"
+            gt_save_LIBS="$LIBS"
+            LIBS="$LIBS $LIBINTL"
+            dnl Now see whether libintl exists and does not depend on libiconv.
+            AC_LINK_IFELSE(
+              [AC_LANG_PROGRAM(
+                 [[
+#include <libintl.h>
+#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);
+#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias (""))
+#else
+#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0
+#endif
+$gt_revision_test_code
+                 ]],
+                 [[
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION
+                 ]])],
+              [eval "$gt_func_gnugettext_libintl=yes"],
+              [eval "$gt_func_gnugettext_libintl=no"])
+            dnl Now see whether libintl exists and depends on libiconv.
+            if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then
+              LIBS="$LIBS $LIBICONV"
+              AC_LINK_IFELSE(
+                [AC_LANG_PROGRAM(
+                   [[
+#include <libintl.h>
+#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);
+#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias (""))
+#else
+#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0
+#endif
+$gt_revision_test_code
+                   ]],
+                   [[
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION
+                   ]])],
+                [LIBINTL="$LIBINTL $LIBICONV"
+                 LTLIBINTL="$LTLIBINTL $LTLIBICONV"
+                 eval "$gt_func_gnugettext_libintl=yes"
+                ])
+            fi
+            CPPFLAGS="$gt_save_CPPFLAGS"
+            LIBS="$gt_save_LIBS"])
+        fi
+
+        dnl If an already present or preinstalled GNU gettext() is found,
+        dnl use it.  But if this macro is used in GNU gettext, and GNU
+        dnl gettext is already preinstalled in libintl, we update this
+        dnl libintl.  (Cf. the install rule in intl/Makefile.in.)
+        if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \
+           || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \
+                && test "$PACKAGE" != gettext-runtime \
+                && test "$PACKAGE" != gettext-tools; }; then
+          gt_use_preinstalled_gnugettext=yes
+        else
+          dnl Reset the values set by searching for libintl.
+          LIBINTL=
+          LTLIBINTL=
+          INCINTL=
+        fi
+
+    ifelse(gt_included_intl, yes, [
+        if test "$gt_use_preinstalled_gnugettext" != "yes"; then
+          dnl GNU gettext is not found in the C library.
+          dnl Fall back on included GNU gettext library.
+          nls_cv_use_gnu_gettext=yes
+        fi
+      fi
+
+      if test "$nls_cv_use_gnu_gettext" = "yes"; then
+        dnl Mark actions used to generate GNU NLS library.
+        BUILD_INCLUDED_LIBINTL=yes
+        USE_INCLUDED_LIBINTL=yes
+        LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV $LIBTHREAD"
+        LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV $LTLIBTHREAD"
+        LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
+      fi
+
+      CATOBJEXT=
+      if test "$gt_use_preinstalled_gnugettext" = "yes" \
+         || test "$nls_cv_use_gnu_gettext" = "yes"; then
+        dnl Mark actions to use GNU gettext tools.
+        CATOBJEXT=.gmo
+      fi
+    ])
+
+    if test -n "$INTL_MACOSX_LIBS"; then
+      if test "$gt_use_preinstalled_gnugettext" = "yes" \
+         || test "$nls_cv_use_gnu_gettext" = "yes"; then
+        dnl Some extra flags are needed during linking.
+        LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
+        LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
+      fi
+    fi
+
+    if test "$gt_use_preinstalled_gnugettext" = "yes" \
+       || test "$nls_cv_use_gnu_gettext" = "yes"; then
+      AC_DEFINE([ENABLE_NLS], [1],
+        [Define to 1 if translation of program messages to the user's native language
+   is requested.])
+    else
+      USE_NLS=no
+    fi
+  fi
+
+  AC_MSG_CHECKING([whether to use NLS])
+  AC_MSG_RESULT([$USE_NLS])
+  if test "$USE_NLS" = "yes"; then
+    AC_MSG_CHECKING([where the gettext function comes from])
+    if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+      if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+        gt_source="external libintl"
+      else
+        gt_source="libc"
+      fi
+    else
+      gt_source="included intl directory"
+    fi
+    AC_MSG_RESULT([$gt_source])
+  fi
+
+  if test "$USE_NLS" = "yes"; then
+
+    if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+      if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+        AC_MSG_CHECKING([how to link with libintl])
+        AC_MSG_RESULT([$LIBINTL])
+        AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL])
+      fi
+
+      dnl For backward compatibility. Some packages may be using this.
+      AC_DEFINE([HAVE_GETTEXT], [1],
+       [Define if the GNU gettext() function is already present or preinstalled.])
+      AC_DEFINE([HAVE_DCGETTEXT], [1],
+       [Define if the GNU dcgettext() function is already present or preinstalled.])
+    fi
+
+    dnl We need to process the po/ directory.
+    POSUB=po
+  fi
+
+  ifelse(gt_included_intl, yes, [
+    dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL
+    dnl to 'yes' because some of the testsuite requires it.
+    if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then
+      BUILD_INCLUDED_LIBINTL=yes
+    fi
+
+    dnl Make all variables we use known to autoconf.
+    AC_SUBST([BUILD_INCLUDED_LIBINTL])
+    AC_SUBST([USE_INCLUDED_LIBINTL])
+    AC_SUBST([CATOBJEXT])
+
+    dnl For backward compatibility. Some configure.ins may be using this.
+    nls_cv_header_intl=
+    nls_cv_header_libgt=
+
+    dnl For backward compatibility. Some Makefiles may be using this.
+    DATADIRNAME=share
+    AC_SUBST([DATADIRNAME])
+
+    dnl For backward compatibility. Some Makefiles may be using this.
+    INSTOBJEXT=.mo
+    AC_SUBST([INSTOBJEXT])
+
+    dnl For backward compatibility. Some Makefiles may be using this.
+    GENCAT=gencat
+    AC_SUBST([GENCAT])
+
+    dnl For backward compatibility. Some Makefiles may be using this.
+    INTLOBJS=
+    if test "$USE_INCLUDED_LIBINTL" = yes; then
+      INTLOBJS="\$(GETTOBJS)"
+    fi
+    AC_SUBST([INTLOBJS])
+
+    dnl Enable libtool support if the surrounding package wishes it.
+    INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix
+    AC_SUBST([INTL_LIBTOOL_SUFFIX_PREFIX])
+  ])
+
+  dnl For backward compatibility. Some Makefiles may be using this.
+  INTLLIBS="$LIBINTL"
+  AC_SUBST([INTLLIBS])
+
+  dnl Make all documented variables known to autoconf.
+  AC_SUBST([LIBINTL])
+  AC_SUBST([LTLIBINTL])
+  AC_SUBST([POSUB])
+])
+
+
+dnl gt_NEEDS_INIT ensures that the gt_needs variable is initialized.
+m4_define([gt_NEEDS_INIT],
+[
+  m4_divert_text([DEFAULTS], [gt_needs=])
+  m4_define([gt_NEEDS_INIT], [])
+])
+
+
+dnl Usage: AM_GNU_GETTEXT_NEED([NEEDSYMBOL])
+AC_DEFUN([AM_GNU_GETTEXT_NEED],
+[
+  m4_divert_text([INIT_PREPARE], [gt_needs="$gt_needs $1"])
+])
+
+
+dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version])
+AC_DEFUN([AM_GNU_GETTEXT_VERSION], [])
+
+
+dnl Usage: AM_GNU_GETTEXT_REQUIRE_VERSION([gettext-version])
+AC_DEFUN([AM_GNU_GETTEXT_REQUIRE_VERSION], [])
diff --git a/m4/glibc2.m4 b/m4/glibc2.m4
new file mode 100644
index 0000000..17a7004
--- /dev/null
+++ b/m4/glibc2.m4
@@ -0,0 +1,31 @@
+# glibc2.m4 serial 3
+dnl Copyright (C) 2000-2002, 2004, 2008, 2010-2019 Free Software Foundation,
+dnl Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+# Test for the GNU C Library, version 2.0 or newer.
+# From Bruno Haible.
+
+AC_DEFUN([gt_GLIBC2],
+  [
+    AC_CACHE_CHECK([whether we are using the GNU C Library 2 or newer],
+      [ac_cv_gnu_library_2],
+      [AC_EGREP_CPP([Lucky GNU user],
+        [
+#include <features.h>
+#ifdef __GNU_LIBRARY__
+ #if (__GLIBC__ >= 2) && !defined __UCLIBC__
+  Lucky GNU user
+ #endif
+#endif
+        ],
+        [ac_cv_gnu_library_2=yes],
+        [ac_cv_gnu_library_2=no])
+      ]
+    )
+    AC_SUBST([GLIBC2])
+    GLIBC2="$ac_cv_gnu_library_2"
+  ]
+)
diff --git a/m4/glibc21.m4 b/m4/glibc21.m4
new file mode 100644
index 0000000..0ab0f23
--- /dev/null
+++ b/m4/glibc21.m4
@@ -0,0 +1,34 @@
+# glibc21.m4 serial 5
+dnl Copyright (C) 2000-2002, 2004, 2008, 2010-2019 Free Software Foundation,
+dnl Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+# Test for the GNU C Library, version 2.1 or newer, or uClibc.
+# From Bruno Haible.
+
+AC_DEFUN([gl_GLIBC21],
+  [
+    AC_CACHE_CHECK([whether we are using the GNU C Library >= 2.1 or uClibc],
+      [ac_cv_gnu_library_2_1],
+      [AC_EGREP_CPP([Lucky],
+        [
+#include <features.h>
+#ifdef __GNU_LIBRARY__
+ #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2)
+  Lucky GNU user
+ #endif
+#endif
+#ifdef __UCLIBC__
+ Lucky user
+#endif
+        ],
+        [ac_cv_gnu_library_2_1=yes],
+        [ac_cv_gnu_library_2_1=no])
+      ]
+    )
+    AC_SUBST([GLIBC21])
+    GLIBC21="$ac_cv_gnu_library_2_1"
+  ]
+)
diff --git a/m4/host-cpu-c-abi.m4 b/m4/host-cpu-c-abi.m4
new file mode 100644
index 0000000..4407296
--- /dev/null
+++ b/m4/host-cpu-c-abi.m4
@@ -0,0 +1,644 @@
+# host-cpu-c-abi.m4 serial 11
+dnl Copyright (C) 2002-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible and Sam Steingold.
+
+dnl Sets the HOST_CPU variable to the canonical name of the CPU.
+dnl Sets the HOST_CPU_C_ABI variable to the canonical name of the CPU with its
+dnl C language ABI (application binary interface).
+dnl Also defines __${HOST_CPU}__ and __${HOST_CPU_C_ABI}__ as C macros in
+dnl config.h.
+dnl
+dnl This canonical name can be used to select a particular assembly language
+dnl source file that will interoperate with C code on the given host.
+dnl
+dnl For example:
+dnl * 'i386' and 'sparc' are different canonical names, because code for i386
+dnl   will not run on SPARC CPUs and vice versa. They have different
+dnl   instruction sets.
+dnl * 'sparc' and 'sparc64' are different canonical names, because code for
+dnl   'sparc' and code for 'sparc64' cannot be linked together: 'sparc' code
+dnl   contains 32-bit instructions, whereas 'sparc64' code contains 64-bit
+dnl   instructions. A process on a SPARC CPU can be in 32-bit mode or in 64-bit
+dnl   mode, but not both.
+dnl * 'mips' and 'mipsn32' are different canonical names, because they use
+dnl   different argument passing and return conventions for C functions, and
+dnl   although the instruction set of 'mips' is a large subset of the
+dnl   instruction set of 'mipsn32'.
+dnl * 'mipsn32' and 'mips64' are different canonical names, because they use
+dnl   different sizes for the C types like 'int' and 'void *', and although
+dnl   the instruction sets of 'mipsn32' and 'mips64' are the same.
+dnl * The same canonical name is used for different endiannesses. You can
+dnl   determine the endianness through preprocessor symbols:
+dnl   - 'arm': test __ARMEL__.
+dnl   - 'mips', 'mipsn32', 'mips64': test _MIPSEB vs. _MIPSEL.
+dnl   - 'powerpc64': test _BIG_ENDIAN vs. _LITTLE_ENDIAN.
+dnl * The same name 'i386' is used for CPUs of type i386, i486, i586
+dnl   (Pentium), AMD K7, Pentium II, Pentium IV, etc., because
+dnl   - Instructions that do not exist on all of these CPUs (cmpxchg,
+dnl     MMX, SSE, SSE2, 3DNow! etc.) are not frequently used. If your
+dnl     assembly language source files use such instructions, you will
+dnl     need to make the distinction.
+dnl   - Speed of execution of the common instruction set is reasonable across
+dnl     the entire family of CPUs. If you have assembly language source files
+dnl     that are optimized for particular CPU types (like GNU gmp has), you
+dnl     will need to make the distinction.
+dnl   See <https://en.wikipedia.org/wiki/X86_instruction_listings>.
+AC_DEFUN([gl_HOST_CPU_C_ABI],
+[
+  AC_REQUIRE([AC_CANONICAL_HOST])
+  AC_REQUIRE([gl_C_ASM])
+  AC_CACHE_CHECK([host CPU and C ABI], [gl_cv_host_cpu_c_abi],
+    [case "$host_cpu" in
+
+changequote(,)dnl
+       i[4567]86 )
+changequote([,])dnl
+         gl_cv_host_cpu_c_abi=i386
+         ;;
+
+       x86_64 )
+         # On x86_64 systems, the C compiler may be generating code in one of
+         # these ABIs:
+         # - 64-bit instruction set, 64-bit pointers, 64-bit 'long': x86_64.
+         # - 64-bit instruction set, 64-bit pointers, 32-bit 'long': x86_64
+         #   with native Windows (mingw, MSVC).
+         # - 64-bit instruction set, 32-bit pointers, 32-bit 'long': x86_64-x32.
+         # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': i386.
+         AC_COMPILE_IFELSE(
+           [AC_LANG_SOURCE(
+              [[#if (defined __x86_64__ || defined __amd64__ \
+                     || defined _M_X64 || defined _M_AMD64)
+                 int ok;
+                #else
+                 error fail
+                #endif
+              ]])],
+           [AC_COMPILE_IFELSE(
+              [AC_LANG_SOURCE(
+                 [[#if defined __ILP32__ || defined _ILP32
+                    int ok;
+                   #else
+                    error fail
+                   #endif
+                 ]])],
+              [gl_cv_host_cpu_c_abi=x86_64-x32],
+              [gl_cv_host_cpu_c_abi=x86_64])],
+           [gl_cv_host_cpu_c_abi=i386])
+         ;;
+
+changequote(,)dnl
+       alphaev[4-8] | alphaev56 | alphapca5[67] | alphaev6[78] )
+changequote([,])dnl
+         gl_cv_host_cpu_c_abi=alpha
+         ;;
+
+       arm* | aarch64 )
+         # Assume arm with EABI.
+         # On arm64 systems, the C compiler may be generating code in one of
+         # these ABIs:
+         # - aarch64 instruction set, 64-bit pointers, 64-bit 'long': arm64.
+         # - aarch64 instruction set, 32-bit pointers, 32-bit 'long': arm64-ilp32.
+         # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': arm or armhf.
+         AC_COMPILE_IFELSE(
+           [AC_LANG_SOURCE(
+              [[#ifdef __aarch64__
+                 int ok;
+                #else
+                 error fail
+                #endif
+              ]])],
+           [AC_COMPILE_IFELSE(
+              [AC_LANG_SOURCE(
+                [[#if defined __ILP32__ || defined _ILP32
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+                ]])],
+              [gl_cv_host_cpu_c_abi=arm64-ilp32],
+              [gl_cv_host_cpu_c_abi=arm64])],
+           [# Don't distinguish little-endian and big-endian arm, since they
+            # don't require different machine code for simple operations and
+            # since the user can distinguish them through the preprocessor
+            # defines __ARMEL__ vs. __ARMEB__.
+            # But distinguish arm which passes floating-point arguments and
+            # return values in integer registers (r0, r1, ...) - this is
+            # gcc -mfloat-abi=soft or gcc -mfloat-abi=softfp - from arm which
+            # passes them in float registers (s0, s1, ...) and double registers
+            # (d0, d1, ...) - this is gcc -mfloat-abi=hard. GCC 4.6 or newer
+            # sets the preprocessor defines __ARM_PCS (for the first case) and
+            # __ARM_PCS_VFP (for the second case), but older GCC does not.
+            echo 'double ddd; void func (double dd) { ddd = dd; }' > conftest.c
+            # Look for a reference to the register d0 in the .s file.
+            AC_TRY_COMMAND(${CC-cc} $CFLAGS $CPPFLAGS $gl_c_asm_opt conftest.c) >/dev/null 2>&1
+            if LC_ALL=C grep 'd0,' conftest.$gl_asmext >/dev/null; then
+              gl_cv_host_cpu_c_abi=armhf
+            else
+              gl_cv_host_cpu_c_abi=arm
+            fi
+            rm -f conftest*
+           ])
+         ;;
+
+       hppa1.0 | hppa1.1 | hppa2.0* | hppa64 )
+         # On hppa, the C compiler may be generating 32-bit code or 64-bit
+         # code. In the latter case, it defines _LP64 and __LP64__.
+         AC_COMPILE_IFELSE(
+           [AC_LANG_SOURCE(
+              [[#ifdef __LP64__
+                 int ok;
+                #else
+                 error fail
+                #endif
+              ]])],
+           [gl_cv_host_cpu_c_abi=hppa64],
+           [gl_cv_host_cpu_c_abi=hppa])
+         ;;
+
+       ia64* )
+         # On ia64 on HP-UX, the C compiler may be generating 64-bit code or
+         # 32-bit code. In the latter case, it defines _ILP32.
+         AC_COMPILE_IFELSE(
+           [AC_LANG_SOURCE(
+              [[#ifdef _ILP32
+                 int ok;
+                #else
+                 error fail
+                #endif
+              ]])],
+           [gl_cv_host_cpu_c_abi=ia64-ilp32],
+           [gl_cv_host_cpu_c_abi=ia64])
+         ;;
+
+       mips* )
+         # We should also check for (_MIPS_SZPTR == 64), but gcc keeps this
+         # at 32.
+         AC_COMPILE_IFELSE(
+           [AC_LANG_SOURCE(
+              [[#if defined _MIPS_SZLONG && (_MIPS_SZLONG == 64)
+                 int ok;
+                #else
+                 error fail
+                #endif
+              ]])],
+           [gl_cv_host_cpu_c_abi=mips64],
+           [# In the n32 ABI, _ABIN32 is defined, _ABIO32 is not defined (but
+            # may later get defined by <sgidefs.h>), and _MIPS_SIM == _ABIN32.
+            # In the 32 ABI, _ABIO32 is defined, _ABIN32 is not defined (but
+            # may later get defined by <sgidefs.h>), and _MIPS_SIM == _ABIO32.
+            AC_COMPILE_IFELSE(
+              [AC_LANG_SOURCE(
+                 [[#if (_MIPS_SIM == _ABIN32)
+                    int ok;
+                   #else
+                    error fail
+                   #endif
+                 ]])],
+              [gl_cv_host_cpu_c_abi=mipsn32],
+              [gl_cv_host_cpu_c_abi=mips])])
+         ;;
+
+       powerpc* )
+         # Different ABIs are in use on AIX vs. Mac OS X vs. Linux,*BSD.
+         # No need to distinguish them here; the caller may distinguish
+         # them based on the OS.
+         # On powerpc64 systems, the C compiler may still be generating
+         # 32-bit code. And on powerpc-ibm-aix systems, the C compiler may
+         # be generating 64-bit code.
+         AC_COMPILE_IFELSE(
+           [AC_LANG_SOURCE(
+              [[#if defined __powerpc64__ || defined _ARCH_PPC64
+                 int ok;
+                #else
+                 error fail
+                #endif
+              ]])],
+           [# On powerpc64, there are two ABIs on Linux: The AIX compatible
+            # one and the ELFv2 one. The latter defines _CALL_ELF=2.
+            AC_COMPILE_IFELSE(
+              [AC_LANG_SOURCE(
+                 [[#if defined _CALL_ELF && _CALL_ELF == 2
+                    int ok;
+                   #else
+                    error fail
+                   #endif
+                 ]])],
+              [gl_cv_host_cpu_c_abi=powerpc64-elfv2],
+              [gl_cv_host_cpu_c_abi=powerpc64])
+           ],
+           [gl_cv_host_cpu_c_abi=powerpc])
+         ;;
+
+       rs6000 )
+         gl_cv_host_cpu_c_abi=powerpc
+         ;;
+
+       riscv32 | riscv64 )
+         # There are 2 architectures (with variants): rv32* and rv64*.
+         AC_COMPILE_IFELSE(
+           [AC_LANG_SOURCE(
+              [[#if __riscv_xlen == 64
+                  int ok;
+                #else
+                  error fail
+                #endif
+              ]])],
+           [cpu=riscv64],
+           [cpu=riscv32])
+         # There are 6 ABIs: ilp32, ilp32f, ilp32d, lp64, lp64f, lp64d.
+         # Size of 'long' and 'void *':
+         AC_COMPILE_IFELSE(
+           [AC_LANG_SOURCE(
+              [[#if defined __LP64__
+                  int ok;
+                #else
+                  error fail
+                #endif
+              ]])],
+           [main_abi=lp64],
+           [main_abi=ilp32])
+         # Float ABIs:
+         # __riscv_float_abi_double:
+         #   'float' and 'double' are passed in floating-point registers.
+         # __riscv_float_abi_single:
+         #   'float' are passed in floating-point registers.
+         # __riscv_float_abi_soft:
+         #   No values are passed in floating-point registers.
+         AC_COMPILE_IFELSE(
+           [AC_LANG_SOURCE(
+              [[#if defined __riscv_float_abi_double
+                  int ok;
+                #else
+                  error fail
+                #endif
+              ]])],
+           [float_abi=d],
+           [AC_COMPILE_IFELSE(
+              [AC_LANG_SOURCE(
+                 [[#if defined __riscv_float_abi_single
+                     int ok;
+                   #else
+                     error fail
+                   #endif
+                 ]])],
+              [float_abi=f],
+              [float_abi=''])
+           ])
+         gl_cv_host_cpu_c_abi="${cpu}-${main_abi}${float_abi}"
+         ;;
+
+       s390* )
+         # On s390x, the C compiler may be generating 64-bit (= s390x) code
+         # or 31-bit (= s390) code.
+         AC_COMPILE_IFELSE(
+           [AC_LANG_SOURCE(
+              [[#if defined __LP64__ || defined __s390x__
+                  int ok;
+                #else
+                  error fail
+                #endif
+              ]])],
+           [gl_cv_host_cpu_c_abi=s390x],
+           [gl_cv_host_cpu_c_abi=s390])
+         ;;
+
+       sparc | sparc64 )
+         # UltraSPARCs running Linux have `uname -m` = "sparc64", but the
+         # C compiler still generates 32-bit code.
+         AC_COMPILE_IFELSE(
+           [AC_LANG_SOURCE(
+              [[#if defined __sparcv9 || defined __arch64__
+                 int ok;
+                #else
+                 error fail
+                #endif
+              ]])],
+           [gl_cv_host_cpu_c_abi=sparc64],
+           [gl_cv_host_cpu_c_abi=sparc])
+         ;;
+
+       *)
+         gl_cv_host_cpu_c_abi="$host_cpu"
+         ;;
+     esac
+    ])
+
+  dnl In most cases, $HOST_CPU and $HOST_CPU_C_ABI are the same.
+  HOST_CPU=`echo "$gl_cv_host_cpu_c_abi" | sed -e 's/-.*//'`
+  HOST_CPU_C_ABI="$gl_cv_host_cpu_c_abi"
+  AC_SUBST([HOST_CPU])
+  AC_SUBST([HOST_CPU_C_ABI])
+
+  # This was
+  #   AC_DEFINE_UNQUOTED([__${HOST_CPU}__])
+  #   AC_DEFINE_UNQUOTED([__${HOST_CPU_C_ABI}__])
+  # earlier, but KAI C++ 3.2d doesn't like this.
+  sed -e 's/-/_/g' >> confdefs.h <<EOF
+#ifndef __${HOST_CPU}__
+#define __${HOST_CPU}__ 1
+#endif
+#ifndef __${HOST_CPU_C_ABI}__
+#define __${HOST_CPU_C_ABI}__ 1
+#endif
+EOF
+  AH_TOP([/* CPU and C ABI indicator */
+#ifndef __i386__
+#undef __i386__
+#endif
+#ifndef __x86_64_x32__
+#undef __x86_64_x32__
+#endif
+#ifndef __x86_64__
+#undef __x86_64__
+#endif
+#ifndef __alpha__
+#undef __alpha__
+#endif
+#ifndef __arm__
+#undef __arm__
+#endif
+#ifndef __armhf__
+#undef __armhf__
+#endif
+#ifndef __arm64_ilp32__
+#undef __arm64_ilp32__
+#endif
+#ifndef __arm64__
+#undef __arm64__
+#endif
+#ifndef __hppa__
+#undef __hppa__
+#endif
+#ifndef __hppa64__
+#undef __hppa64__
+#endif
+#ifndef __ia64_ilp32__
+#undef __ia64_ilp32__
+#endif
+#ifndef __ia64__
+#undef __ia64__
+#endif
+#ifndef __m68k__
+#undef __m68k__
+#endif
+#ifndef __mips__
+#undef __mips__
+#endif
+#ifndef __mipsn32__
+#undef __mipsn32__
+#endif
+#ifndef __mips64__
+#undef __mips64__
+#endif
+#ifndef __powerpc__
+#undef __powerpc__
+#endif
+#ifndef __powerpc64__
+#undef __powerpc64__
+#endif
+#ifndef __powerpc64_elfv2__
+#undef __powerpc64_elfv2__
+#endif
+#ifndef __riscv32__
+#undef __riscv32__
+#endif
+#ifndef __riscv64__
+#undef __riscv64__
+#endif
+#ifndef __riscv32_ilp32__
+#undef __riscv32_ilp32__
+#endif
+#ifndef __riscv32_ilp32f__
+#undef __riscv32_ilp32f__
+#endif
+#ifndef __riscv32_ilp32d__
+#undef __riscv32_ilp32d__
+#endif
+#ifndef __riscv64_ilp32__
+#undef __riscv64_ilp32__
+#endif
+#ifndef __riscv64_ilp32f__
+#undef __riscv64_ilp32f__
+#endif
+#ifndef __riscv64_ilp32d__
+#undef __riscv64_ilp32d__
+#endif
+#ifndef __riscv64_lp64__
+#undef __riscv64_lp64__
+#endif
+#ifndef __riscv64_lp64f__
+#undef __riscv64_lp64f__
+#endif
+#ifndef __riscv64_lp64d__
+#undef __riscv64_lp64d__
+#endif
+#ifndef __s390__
+#undef __s390__
+#endif
+#ifndef __s390x__
+#undef __s390x__
+#endif
+#ifndef __sh__
+#undef __sh__
+#endif
+#ifndef __sparc__
+#undef __sparc__
+#endif
+#ifndef __sparc64__
+#undef __sparc64__
+#endif
+])
+
+])
+
+
+dnl Sets the HOST_CPU_C_ABI_32BIT variable to 'yes' if the C language ABI
+dnl (application binary interface) is a 32-bit one, or to 'no' otherwise.
+dnl This is a simplified variant of gl_HOST_CPU_C_ABI.
+AC_DEFUN([gl_HOST_CPU_C_ABI_32BIT],
+[
+  AC_REQUIRE([AC_CANONICAL_HOST])
+  AC_CACHE_CHECK([32-bit host C ABI], [gl_cv_host_cpu_c_abi_32bit],
+    [if test -n "$gl_cv_host_cpu_c_abi"; then
+       case "$gl_cv_host_cpu_c_abi" in
+         i386 | x86_64-x32 | arm | armhf | arm64-ilp32 | hppa | ia64-ilp32 | mips | mipsn32 | powerpc | riscv*-ilp32* | s390 | sparc)
+           gl_cv_host_cpu_c_abi_32bit=yes ;;
+         *)
+           gl_cv_host_cpu_c_abi_32bit=no ;;
+       esac
+     else
+       case "$host_cpu" in
+
+changequote(,)dnl
+         i[4567]86 )
+changequote([,])dnl
+           gl_cv_host_cpu_c_abi_32bit=yes
+           ;;
+
+         x86_64 )
+           # On x86_64 systems, the C compiler may be generating code in one of
+           # these ABIs:
+           # - 64-bit instruction set, 64-bit pointers, 64-bit 'long': x86_64.
+           # - 64-bit instruction set, 64-bit pointers, 32-bit 'long': x86_64
+           #   with native Windows (mingw, MSVC).
+           # - 64-bit instruction set, 32-bit pointers, 32-bit 'long': x86_64-x32.
+           # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': i386.
+           AC_COMPILE_IFELSE(
+             [AC_LANG_SOURCE(
+                [[#if (defined __x86_64__ || defined __amd64__ \
+                       || defined _M_X64 || defined _M_AMD64) \
+                      && !(defined __ILP32__ || defined _ILP32)
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+                ]])],
+             [gl_cv_host_cpu_c_abi_32bit=no],
+             [gl_cv_host_cpu_c_abi_32bit=yes])
+           ;;
+
+         arm* | aarch64 )
+           # Assume arm with EABI.
+           # On arm64 systems, the C compiler may be generating code in one of
+           # these ABIs:
+           # - aarch64 instruction set, 64-bit pointers, 64-bit 'long': arm64.
+           # - aarch64 instruction set, 32-bit pointers, 32-bit 'long': arm64-ilp32.
+           # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': arm or armhf.
+           AC_COMPILE_IFELSE(
+             [AC_LANG_SOURCE(
+                [[#if defined __aarch64__ && !(defined __ILP32__ || defined _ILP32)
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+                ]])],
+             [gl_cv_host_cpu_c_abi_32bit=no],
+             [gl_cv_host_cpu_c_abi_32bit=yes])
+           ;;
+
+         hppa1.0 | hppa1.1 | hppa2.0* | hppa64 )
+           # On hppa, the C compiler may be generating 32-bit code or 64-bit
+           # code. In the latter case, it defines _LP64 and __LP64__.
+           AC_COMPILE_IFELSE(
+             [AC_LANG_SOURCE(
+                [[#ifdef __LP64__
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+                ]])],
+             [gl_cv_host_cpu_c_abi_32bit=no],
+             [gl_cv_host_cpu_c_abi_32bit=yes])
+           ;;
+
+         ia64* )
+           # On ia64 on HP-UX, the C compiler may be generating 64-bit code or
+           # 32-bit code. In the latter case, it defines _ILP32.
+           AC_COMPILE_IFELSE(
+             [AC_LANG_SOURCE(
+                [[#ifdef _ILP32
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+                ]])],
+             [gl_cv_host_cpu_c_abi_32bit=yes],
+             [gl_cv_host_cpu_c_abi_32bit=no])
+           ;;
+
+         mips* )
+           # We should also check for (_MIPS_SZPTR == 64), but gcc keeps this
+           # at 32.
+           AC_COMPILE_IFELSE(
+             [AC_LANG_SOURCE(
+                [[#if defined _MIPS_SZLONG && (_MIPS_SZLONG == 64)
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+                ]])],
+             [gl_cv_host_cpu_c_abi_32bit=no],
+             [gl_cv_host_cpu_c_abi_32bit=yes])
+           ;;
+
+         powerpc* )
+           # Different ABIs are in use on AIX vs. Mac OS X vs. Linux,*BSD.
+           # No need to distinguish them here; the caller may distinguish
+           # them based on the OS.
+           # On powerpc64 systems, the C compiler may still be generating
+           # 32-bit code. And on powerpc-ibm-aix systems, the C compiler may
+           # be generating 64-bit code.
+           AC_COMPILE_IFELSE(
+             [AC_LANG_SOURCE(
+                [[#if defined __powerpc64__ || defined _ARCH_PPC64
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+                ]])],
+             [gl_cv_host_cpu_c_abi_32bit=no],
+             [gl_cv_host_cpu_c_abi_32bit=yes])
+           ;;
+
+         rs6000 )
+           gl_cv_host_cpu_c_abi_32bit=yes
+           ;;
+
+         riscv32 | riscv64 )
+           # There are 6 ABIs: ilp32, ilp32f, ilp32d, lp64, lp64f, lp64d.
+           # Size of 'long' and 'void *':
+           AC_COMPILE_IFELSE(
+             [AC_LANG_SOURCE(
+                [[#if defined __LP64__
+                    int ok;
+                  #else
+                    error fail
+                  #endif
+                ]])],
+             [gl_cv_host_cpu_c_abi_32bit=no],
+             [gl_cv_host_cpu_c_abi_32bit=yes])
+           ;;
+
+         s390* )
+           # On s390x, the C compiler may be generating 64-bit (= s390x) code
+           # or 31-bit (= s390) code.
+           AC_COMPILE_IFELSE(
+             [AC_LANG_SOURCE(
+                [[#if defined __LP64__ || defined __s390x__
+                    int ok;
+                  #else
+                    error fail
+                  #endif
+                ]])],
+             [gl_cv_host_cpu_c_abi_32bit=no],
+             [gl_cv_host_cpu_c_abi_32bit=yes])
+           ;;
+
+         sparc | sparc64 )
+           # UltraSPARCs running Linux have `uname -m` = "sparc64", but the
+           # C compiler still generates 32-bit code.
+           AC_COMPILE_IFELSE(
+             [AC_LANG_SOURCE(
+                [[#if defined __sparcv9 || defined __arch64__
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+                ]])],
+             [gl_cv_host_cpu_c_abi_32bit=no],
+             [gl_cv_host_cpu_c_abi_32bit=yes])
+           ;;
+
+         *)
+           gl_cv_host_cpu_c_abi_32bit=no
+           ;;
+       esac
+     fi
+    ])
+
+  HOST_CPU_C_ABI_32BIT="$gl_cv_host_cpu_c_abi_32bit"
+])
diff --git a/m4/iconv.m4 b/m4/iconv.m4
new file mode 100644
index 0000000..a285e9d
--- /dev/null
+++ b/m4/iconv.m4
@@ -0,0 +1,288 @@
+# iconv.m4 serial 21
+dnl Copyright (C) 2000-2002, 2007-2014, 2016-2019 Free Software Foundation,
+dnl Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([AM_ICONV_LINKFLAGS_BODY],
+[
+  dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
+  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+  AC_REQUIRE([AC_LIB_RPATH])
+
+  dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
+  dnl accordingly.
+  AC_LIB_LINKFLAGS_BODY([iconv])
+])
+
+AC_DEFUN([AM_ICONV_LINK],
+[
+  dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
+  dnl those with the standalone portable GNU libiconv installed).
+  AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles
+
+  dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
+  dnl accordingly.
+  AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
+
+  dnl Add $INCICONV to CPPFLAGS before performing the following checks,
+  dnl because if the user has installed libiconv and not disabled its use
+  dnl via --without-libiconv-prefix, he wants to use it. The first
+  dnl AC_LINK_IFELSE will then fail, the second AC_LINK_IFELSE will succeed.
+  am_save_CPPFLAGS="$CPPFLAGS"
+  AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV])
+
+  AC_CACHE_CHECK([for iconv], [am_cv_func_iconv], [
+    am_cv_func_iconv="no, consider installing GNU libiconv"
+    am_cv_lib_iconv=no
+    AC_LINK_IFELSE(
+      [AC_LANG_PROGRAM(
+         [[
+#include <stdlib.h>
+#include <iconv.h>
+         ]],
+         [[iconv_t cd = iconv_open("","");
+           iconv(cd,NULL,NULL,NULL,NULL);
+           iconv_close(cd);]])],
+      [am_cv_func_iconv=yes])
+    if test "$am_cv_func_iconv" != yes; then
+      am_save_LIBS="$LIBS"
+      LIBS="$LIBS $LIBICONV"
+      AC_LINK_IFELSE(
+        [AC_LANG_PROGRAM(
+           [[
+#include <stdlib.h>
+#include <iconv.h>
+           ]],
+           [[iconv_t cd = iconv_open("","");
+             iconv(cd,NULL,NULL,NULL,NULL);
+             iconv_close(cd);]])],
+        [am_cv_lib_iconv=yes]
+        [am_cv_func_iconv=yes])
+      LIBS="$am_save_LIBS"
+    fi
+  ])
+  if test "$am_cv_func_iconv" = yes; then
+    AC_CACHE_CHECK([for working iconv], [am_cv_func_iconv_works], [
+      dnl This tests against bugs in AIX 5.1, AIX 6.1..7.1, HP-UX 11.11,
+      dnl Solaris 10.
+      am_save_LIBS="$LIBS"
+      if test $am_cv_lib_iconv = yes; then
+        LIBS="$LIBS $LIBICONV"
+      fi
+      am_cv_func_iconv_works=no
+      for ac_iconv_const in '' 'const'; do
+        AC_RUN_IFELSE(
+          [AC_LANG_PROGRAM(
+             [[
+#include <iconv.h>
+#include <string.h>
+
+#ifndef ICONV_CONST
+# define ICONV_CONST $ac_iconv_const
+#endif
+             ]],
+             [[int result = 0;
+  /* Test against AIX 5.1 bug: Failures are not distinguishable from successful
+     returns.  */
+  {
+    iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
+    if (cd_utf8_to_88591 != (iconv_t)(-1))
+      {
+        static ICONV_CONST char input[] = "\342\202\254"; /* EURO SIGN */
+        char buf[10];
+        ICONV_CONST char *inptr = input;
+        size_t inbytesleft = strlen (input);
+        char *outptr = buf;
+        size_t outbytesleft = sizeof (buf);
+        size_t res = iconv (cd_utf8_to_88591,
+                            &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if (res == 0)
+          result |= 1;
+        iconv_close (cd_utf8_to_88591);
+      }
+  }
+  /* Test against Solaris 10 bug: Failures are not distinguishable from
+     successful returns.  */
+  {
+    iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646");
+    if (cd_ascii_to_88591 != (iconv_t)(-1))
+      {
+        static ICONV_CONST char input[] = "\263";
+        char buf[10];
+        ICONV_CONST char *inptr = input;
+        size_t inbytesleft = strlen (input);
+        char *outptr = buf;
+        size_t outbytesleft = sizeof (buf);
+        size_t res = iconv (cd_ascii_to_88591,
+                            &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if (res == 0)
+          result |= 2;
+        iconv_close (cd_ascii_to_88591);
+      }
+  }
+  /* Test against AIX 6.1..7.1 bug: Buffer overrun.  */
+  {
+    iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1");
+    if (cd_88591_to_utf8 != (iconv_t)(-1))
+      {
+        static ICONV_CONST char input[] = "\304";
+        static char buf[2] = { (char)0xDE, (char)0xAD };
+        ICONV_CONST char *inptr = input;
+        size_t inbytesleft = 1;
+        char *outptr = buf;
+        size_t outbytesleft = 1;
+        size_t res = iconv (cd_88591_to_utf8,
+                            &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD)
+          result |= 4;
+        iconv_close (cd_88591_to_utf8);
+      }
+  }
+#if 0 /* This bug could be worked around by the caller.  */
+  /* Test against HP-UX 11.11 bug: Positive return value instead of 0.  */
+  {
+    iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
+    if (cd_88591_to_utf8 != (iconv_t)(-1))
+      {
+        static ICONV_CONST char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337";
+        char buf[50];
+        ICONV_CONST char *inptr = input;
+        size_t inbytesleft = strlen (input);
+        char *outptr = buf;
+        size_t outbytesleft = sizeof (buf);
+        size_t res = iconv (cd_88591_to_utf8,
+                            &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if ((int)res > 0)
+          result |= 8;
+        iconv_close (cd_88591_to_utf8);
+      }
+  }
+#endif
+  /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
+     provided.  */
+  {
+    /* Try standardized names.  */
+    iconv_t cd1 = iconv_open ("UTF-8", "EUC-JP");
+    /* Try IRIX, OSF/1 names.  */
+    iconv_t cd2 = iconv_open ("UTF-8", "eucJP");
+    /* Try AIX names.  */
+    iconv_t cd3 = iconv_open ("UTF-8", "IBM-eucJP");
+    /* Try HP-UX names.  */
+    iconv_t cd4 = iconv_open ("utf8", "eucJP");
+    if (cd1 == (iconv_t)(-1) && cd2 == (iconv_t)(-1)
+        && cd3 == (iconv_t)(-1) && cd4 == (iconv_t)(-1))
+      result |= 16;
+    if (cd1 != (iconv_t)(-1))
+      iconv_close (cd1);
+    if (cd2 != (iconv_t)(-1))
+      iconv_close (cd2);
+    if (cd3 != (iconv_t)(-1))
+      iconv_close (cd3);
+    if (cd4 != (iconv_t)(-1))
+      iconv_close (cd4);
+  }
+  return result;
+]])],
+          [am_cv_func_iconv_works=yes], ,
+          [case "$host_os" in
+             aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
+             *)            am_cv_func_iconv_works="guessing yes" ;;
+           esac])
+        test "$am_cv_func_iconv_works" = no || break
+      done
+      LIBS="$am_save_LIBS"
+    ])
+    case "$am_cv_func_iconv_works" in
+      *no) am_func_iconv=no am_cv_lib_iconv=no ;;
+      *)   am_func_iconv=yes ;;
+    esac
+  else
+    am_func_iconv=no am_cv_lib_iconv=no
+  fi
+  if test "$am_func_iconv" = yes; then
+    AC_DEFINE([HAVE_ICONV], [1],
+      [Define if you have the iconv() function and it works.])
+  fi
+  if test "$am_cv_lib_iconv" = yes; then
+    AC_MSG_CHECKING([how to link with libiconv])
+    AC_MSG_RESULT([$LIBICONV])
+  else
+    dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV
+    dnl either.
+    CPPFLAGS="$am_save_CPPFLAGS"
+    LIBICONV=
+    LTLIBICONV=
+  fi
+  AC_SUBST([LIBICONV])
+  AC_SUBST([LTLIBICONV])
+])
+
+dnl Define AM_ICONV using AC_DEFUN_ONCE for Autoconf >= 2.64, in order to
+dnl avoid warnings like
+dnl "warning: AC_REQUIRE: `AM_ICONV' was expanded before it was required".
+dnl This is tricky because of the way 'aclocal' is implemented:
+dnl - It requires defining an auxiliary macro whose name ends in AC_DEFUN.
+dnl   Otherwise aclocal's initial scan pass would miss the macro definition.
+dnl - It requires a line break inside the AC_DEFUN_ONCE and AC_DEFUN expansions.
+dnl   Otherwise aclocal would emit many "Use of uninitialized value $1"
+dnl   warnings.
+m4_define([gl_iconv_AC_DEFUN],
+  m4_version_prereq([2.64],
+    [[AC_DEFUN_ONCE(
+        [$1], [$2])]],
+    [m4_ifdef([gl_00GNULIB],
+       [[AC_DEFUN_ONCE(
+           [$1], [$2])]],
+       [[AC_DEFUN(
+           [$1], [$2])]])]))
+gl_iconv_AC_DEFUN([AM_ICONV],
+[
+  AM_ICONV_LINK
+  if test "$am_cv_func_iconv" = yes; then
+    AC_MSG_CHECKING([for iconv declaration])
+    AC_CACHE_VAL([am_cv_proto_iconv], [
+      AC_COMPILE_IFELSE(
+        [AC_LANG_PROGRAM(
+           [[
+#include <stdlib.h>
+#include <iconv.h>
+extern
+#ifdef __cplusplus
+"C"
+#endif
+#if defined(__STDC__) || defined(_MSC_VER) || defined(__cplusplus)
+size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
+#else
+size_t iconv();
+#endif
+           ]],
+           [[]])],
+        [am_cv_proto_iconv_arg1=""],
+        [am_cv_proto_iconv_arg1="const"])
+      am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"])
+    am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
+    AC_MSG_RESULT([
+         $am_cv_proto_iconv])
+  else
+    dnl When compiling GNU libiconv on a system that does not have iconv yet,
+    dnl pick the POSIX compliant declaration without 'const'.
+    am_cv_proto_iconv_arg1=""
+  fi
+  AC_DEFINE_UNQUOTED([ICONV_CONST], [$am_cv_proto_iconv_arg1],
+    [Define as const if the declaration of iconv() needs const.])
+  dnl Also substitute ICONV_CONST in the gnulib generated <iconv.h>.
+  m4_ifdef([gl_ICONV_H_DEFAULTS],
+    [AC_REQUIRE([gl_ICONV_H_DEFAULTS])
+     if test -n "$am_cv_proto_iconv_arg1"; then
+       ICONV_CONST="const"
+     fi
+    ])
+])
diff --git a/m4/intdiv0.m4 b/m4/intdiv0.m4
new file mode 100644
index 0000000..40dd43b
--- /dev/null
+++ b/m4/intdiv0.m4
@@ -0,0 +1,87 @@
+# intdiv0.m4 serial 6 (gettext-0.18.2)
+dnl Copyright (C) 2002, 2007-2008, 2010-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([gt_INTDIV0],
+[
+  AC_REQUIRE([AC_PROG_CC])dnl
+  AC_REQUIRE([AC_CANONICAL_HOST])dnl
+
+  AC_CACHE_CHECK([whether integer division by zero raises SIGFPE],
+    gt_cv_int_divbyzero_sigfpe,
+    [
+      gt_cv_int_divbyzero_sigfpe=
+changequote(,)dnl
+      case "$host_os" in
+        macos* | darwin[6-9]* | darwin[1-9][0-9]*)
+          # On Mac OS X 10.2 or newer, just assume the same as when cross-
+          # compiling. If we were to perform the real test, 1 Crash Report
+          # dialog window would pop up.
+          case "$host_cpu" in
+            i[34567]86 | x86_64)
+              gt_cv_int_divbyzero_sigfpe="guessing yes" ;;
+          esac
+          ;;
+      esac
+changequote([,])dnl
+      if test -z "$gt_cv_int_divbyzero_sigfpe"; then
+        AC_RUN_IFELSE(
+          [AC_LANG_SOURCE([[
+#include <stdlib.h>
+#include <signal.h>
+
+static void
+sigfpe_handler (int sig)
+{
+  /* Exit with code 0 if SIGFPE, with code 1 if any other signal.  */
+  exit (sig != SIGFPE);
+}
+
+int x = 1;
+int y = 0;
+int z;
+int xnan;
+
+int main ()
+{
+  signal (SIGFPE, sigfpe_handler);
+/* IRIX and AIX (when "xlc -qcheck" is used) yield signal SIGTRAP.  */
+#if (defined (__sgi) || defined (_AIX)) && defined (SIGTRAP)
+  signal (SIGTRAP, sigfpe_handler);
+#endif
+/* Linux/SPARC yields signal SIGILL.  */
+#if defined (__sparc__) && defined (__linux__)
+  signal (SIGILL, sigfpe_handler);
+#endif
+
+  z = x / y;
+  xnan = y / y;
+  exit (2);
+}
+]])],
+          [gt_cv_int_divbyzero_sigfpe=yes],
+          [gt_cv_int_divbyzero_sigfpe=no],
+          [
+            # Guess based on the CPU.
+changequote(,)dnl
+            case "$host_cpu" in
+              alpha* | i[34567]86 | x86_64 | m68k | s390*)
+                gt_cv_int_divbyzero_sigfpe="guessing yes";;
+              *)
+                gt_cv_int_divbyzero_sigfpe="guessing no";;
+            esac
+changequote([,])dnl
+          ])
+      fi
+    ])
+  case "$gt_cv_int_divbyzero_sigfpe" in
+    *yes) value=1;;
+    *) value=0;;
+  esac
+  AC_DEFINE_UNQUOTED([INTDIV0_RAISES_SIGFPE], [$value],
+    [Define if integer division by zero raises signal SIGFPE.])
+])
diff --git a/m4/intl-thread-locale.m4 b/m4/intl-thread-locale.m4
new file mode 100644
index 0000000..3ecba86
--- /dev/null
+++ b/m4/intl-thread-locale.m4
@@ -0,0 +1,183 @@
+# intl-thread-locale.m4 serial 4
+dnl Copyright (C) 2015-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Check how to retrieve the name of a per-thread locale (POSIX locale_t).
+dnl Sets gt_nameless_locales.
+AC_DEFUN([gt_INTL_THREAD_LOCALE_NAME],
+[
+  AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles
+
+  dnl Persuade Solaris <locale.h> to define 'locale_t'.
+  AC_REQUIRE([AC_USE_SYSTEM_EXTENSIONS])
+
+  dnl Test whether uselocale() exists and works at all.
+  gt_FUNC_USELOCALE
+
+  dnl On OpenBSD >= 6.2, the locale_t type and the uselocale(), newlocale(),
+  dnl duplocale(), freelocale() functions exist but are effectively useless,
+  dnl because the locale_t value depends only on the LC_CTYPE category of the
+  dnl locale and furthermore contains only one bit of information (it
+  dnl distinguishes the "C" locale from the *.UTF-8 locales). See
+  dnl <https://cvsweb.openbsd.org/src/lib/libc/locale/newlocale.c?rev=1.1&content-type=text/x-cvsweb-markup>.
+  dnl In the setlocale() implementation they have thought about the programs
+  dnl that use the API ("Even though only LC_CTYPE has any effect in the
+  dnl OpenBSD base system, store complete information about the global locale,
+  dnl such that third-party software can access it"), but for uselocale()
+  dnl they did not think about the programs.
+  dnl In this situation, even the HAVE_NAMELESS_LOCALES support does not work.
+  dnl So, define HAVE_FAKE_LOCALES and disable all locale_t support.
+  case "$gt_cv_func_uselocale_works" in
+    *yes)
+      AC_CHECK_HEADERS_ONCE([xlocale.h])
+      AC_CACHE_CHECK([for fake locale system (OpenBSD)],
+        [gt_cv_locale_fake],
+        [AC_RUN_IFELSE(
+           [AC_LANG_SOURCE([[
+#include <locale.h>
+#if HAVE_XLOCALE_H
+# include <xlocale.h>
+#endif
+int main ()
+{
+  locale_t loc1, loc2;
+  if (setlocale (LC_ALL, "de_DE.UTF-8") == NULL) return 1;
+  if (setlocale (LC_ALL, "fr_FR.UTF-8") == NULL) return 1;
+  loc1 = newlocale (LC_ALL_MASK, "de_DE.UTF-8", (locale_t)0);
+  loc2 = newlocale (LC_ALL_MASK, "fr_FR.UTF-8", (locale_t)0);
+  return !(loc1 == loc2);
+}]])],
+           [gt_cv_locale_fake=yes],
+           [gt_cv_locale_fake=no],
+           [dnl Guess the locale system is fake only on OpenBSD.
+            case "$host_os" in
+              openbsd*) gt_cv_locale_fake="guessing yes" ;;
+              *)        gt_cv_locale_fake="guessing no" ;;
+            esac
+           ])
+        ])
+      ;;
+    *) gt_cv_locale_fake=no ;;
+  esac
+  case "$gt_cv_locale_fake" in
+    *yes)
+      AC_DEFINE([HAVE_FAKE_LOCALES], [1],
+        [Define if the locale_t type contains insufficient information, as on OpenBSD.])
+      ;;
+  esac
+
+  case "$gt_cv_func_uselocale_works" in
+    *yes)
+      AC_CACHE_CHECK([for Solaris 11.4 locale system],
+        [gt_cv_locale_solaris114],
+        [case "$host_os" in
+           solaris*)
+             dnl Test whether <locale.h> defines locale_t as a typedef of
+             dnl 'struct _LC_locale_t **' (whereas Illumos defines it as a
+             dnl typedef of 'struct _locale *').
+             dnl Another possible test would be to include <sys/localedef.h>
+             dnl and test whether it defines the _LC_core_data_locale_t type.
+             dnl This type was added in Solaris 11.4.
+             AC_COMPILE_IFELSE(
+               [AC_LANG_PROGRAM([[
+                  #include <locale.h>
+                  struct _LC_locale_t *x;
+                  locale_t y;
+                ]],
+                [[*y = x;]])],
+               [gt_cv_locale_solaris114=yes],
+               [gt_cv_locale_solaris114=no])
+             ;;
+           *) gt_cv_locale_solaris114=no ;;
+         esac
+        ])
+      ;;
+    *) gt_cv_locale_solaris114=no ;;
+  esac
+  if test $gt_cv_locale_solaris114 = yes; then
+    AC_DEFINE([HAVE_SOLARIS114_LOCALES], [1],
+      [Define if the locale_t type is as on Solaris 11.4.])
+  fi
+
+  dnl Solaris 12 will maybe provide getlocalename_l.  If it does, it will
+  dnl improve the implementation of gl_locale_name_thread(), by removing
+  dnl the use of undocumented structures.
+  case "$gt_cv_func_uselocale_works" in
+    *yes)
+      AC_CHECK_FUNCS([getlocalename_l])
+      ;;
+  esac
+
+  dnl This code is for future use, in case we some day have to port to a
+  dnl platform where the locale_t type does not provide access to the name of
+  dnl each locale category.  This code has the drawback that it requires the
+  dnl gnulib overrides of 'newlocale', 'duplocale', 'freelocale', which is a
+  dnl problem for GNU libunistring.  Therefore try hard to avoid enabling this
+  dnl code!
+  gt_nameless_locales=no
+  if false; then
+    gt_nameless_locales=yes
+    AC_DEFINE([HAVE_NAMELESS_LOCALES], [1],
+      [Define if the locale_t type does not contain the name of each locale category.])
+  fi
+])
+
+dnl Tests whether uselocale() exists and is usable.
+dnl Sets gt_cv_func_uselocale_works. Defines HAVE_WORKING_USELOCALE.
+AC_DEFUN([gt_FUNC_USELOCALE],
+[
+  AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles
+
+  dnl Persuade Solaris <locale.h> to define 'locale_t'.
+  AC_REQUIRE([AC_USE_SYSTEM_EXTENSIONS])
+
+  AC_CHECK_FUNCS_ONCE([uselocale])
+
+  dnl On AIX 7.2, the uselocale() function is not documented and leads to
+  dnl crashes in subsequent setlocale() invocations.
+  if test $ac_cv_func_uselocale = yes; then
+    AC_CHECK_HEADERS_ONCE([xlocale.h])
+    AC_CACHE_CHECK([whether uselocale works],
+      [gt_cv_func_uselocale_works],
+      [AC_RUN_IFELSE(
+         [AC_LANG_SOURCE([[
+#include <locale.h>
+#if HAVE_XLOCALE_H
+# include <xlocale.h>
+#endif
+int main ()
+{
+  uselocale (NULL);
+  setlocale (LC_ALL, "en_US.UTF-8");
+  return 0;
+}]])],
+         [gt_cv_func_uselocale_works=yes],
+         [gt_cv_func_uselocale_works=no],
+         [# Guess no on AIX, yes otherwise.
+          case "$host_os" in
+            aix*) gt_cv_func_uselocale_works="guessing no" ;;
+            *)    gt_cv_func_uselocale_works="guessing yes" ;;
+          esac
+         ])
+      ])
+  else
+    gt_cv_func_uselocale_works=no
+  fi
+  case "$gt_cv_func_uselocale_works" in
+    *yes)
+      AC_DEFINE([HAVE_WORKING_USELOCALE], [1],
+        [Define if the uselocale function exists any may safely be called.])
+      ;;
+  esac
+])
diff --git a/m4/intl.m4 b/m4/intl.m4
new file mode 100644
index 0000000..b481c50
--- /dev/null
+++ b/m4/intl.m4
@@ -0,0 +1,312 @@
+# intl.m4 serial 34 (gettext-0.19.9)
+dnl Copyright (C) 1995-2014, 2016-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl   Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
+dnl   Bruno Haible <haible@clisp.cons.org>, 2000-2009.
+
+AC_PREREQ([2.60])
+
+dnl Checks for all prerequisites of the intl subdirectory,
+dnl except for INTL_LIBTOOL_SUFFIX_PREFIX (and possibly LIBTOOL), INTLOBJS,
+dnl            USE_INCLUDED_LIBINTL, BUILD_INCLUDED_LIBINTL.
+AC_DEFUN([AM_INTL_SUBDIR],
+[
+  AC_REQUIRE([AC_PROG_INSTALL])dnl
+  AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+  AC_REQUIRE([AC_PROG_CC])dnl
+  AC_REQUIRE([AC_CANONICAL_HOST])dnl
+  AC_REQUIRE([gt_GLIBC2])dnl
+  AC_REQUIRE([gl_VISIBILITY])dnl
+  AC_REQUIRE([gt_INTL_SUBDIR_CORE])dnl
+  AC_REQUIRE([AC_TYPE_LONG_LONG_INT])dnl
+  AC_REQUIRE([gt_TYPE_WCHAR_T])dnl
+  AC_REQUIRE([gt_TYPE_WINT_T])dnl
+  AC_REQUIRE([gl_AC_HEADER_INTTYPES_H])
+  AC_REQUIRE([gt_TYPE_INTMAX_T])
+  AC_REQUIRE([gt_PRINTF_POSIX])
+  AC_REQUIRE([gl_GLIBC21])dnl
+  AC_REQUIRE([gl_XSIZE])dnl
+  AC_REQUIRE([gl_FCNTL_O_FLAGS])dnl
+  AC_REQUIRE([gt_INTL_THREAD_LOCALE_NAME])
+  AC_REQUIRE([gt_INTL_MACOSX])dnl
+  AC_REQUIRE([gl_EXTERN_INLINE])dnl
+  AC_REQUIRE([gt_GL_ATTRIBUTE])dnl
+  AC_REQUIRE([AC_C_FLEXIBLE_ARRAY_MEMBER])dnl
+
+  dnl In projects that use gnulib, use gl_PROG_AR_RANLIB.
+  dnl The '][' hides this use from 'aclocal'.
+  m4_ifdef([g][l_PROG_AR_RANLIB],
+    [AC_REQUIRE([g][l_PROG_AR_RANLIB])],
+    [AC_REQUIRE([AC_PROG_RANLIB])
+     dnl Use Automake-documented default values for AR and ARFLAGS, but prefer
+     dnl ${host}-ar over ar (useful for cross-compiling).
+     AC_CHECK_TOOL([AR], [ar], [ar])
+     if test -z "$ARFLAGS"; then
+       ARFLAGS='cr'
+     fi
+     AC_SUBST([AR])
+     AC_SUBST([ARFLAGS])
+    ])
+
+  dnl Support for automake's --enable-silent-rules.
+  case "$enable_silent_rules" in
+    yes) INTL_DEFAULT_VERBOSITY=0;;
+    no)  INTL_DEFAULT_VERBOSITY=1;;
+    *)   INTL_DEFAULT_VERBOSITY=1;;
+  esac
+  AC_SUBST([INTL_DEFAULT_VERBOSITY])
+
+  AC_CHECK_TYPE([ptrdiff_t], ,
+    [AC_DEFINE([ptrdiff_t], [long],
+       [Define as the type of the result of subtracting two pointers, if the system doesn't define it.])
+    ])
+  AC_CHECK_HEADERS([features.h stddef.h stdlib.h string.h])
+  AC_CHECK_FUNCS([asprintf fwprintf newlocale putenv setenv setlocale \
+    snprintf strnlen uselocale wcslen wcsnlen mbrtowc wcrtomb])
+
+  dnl Use the _snprintf function only if it is declared (because on NetBSD it
+  dnl is defined as a weak alias of snprintf; we prefer to use the latter).
+  AC_CHECK_DECLS([_snprintf, _snwprintf], , , [#include <stdio.h>])
+
+  dnl Use the *_unlocked functions only if they are declared.
+  dnl (because some of them were defined without being declared in Solaris
+  dnl 2.5.1 but were removed in Solaris 2.6, whereas we want binaries built
+  dnl on Solaris 2.5.1 to run on Solaris 2.6).
+  AC_CHECK_DECLS([getc_unlocked], , , [#include <stdio.h>])
+
+  case $gt_cv_func_printf_posix in
+    *yes) HAVE_POSIX_PRINTF=1 ;;
+    *) HAVE_POSIX_PRINTF=0 ;;
+  esac
+  AC_SUBST([HAVE_POSIX_PRINTF])
+  if test "$ac_cv_func_asprintf" = yes; then
+    HAVE_ASPRINTF=1
+  else
+    HAVE_ASPRINTF=0
+  fi
+  AC_SUBST([HAVE_ASPRINTF])
+  if test "$ac_cv_func_snprintf" = yes; then
+    HAVE_SNPRINTF=1
+  else
+    HAVE_SNPRINTF=0
+  fi
+  AC_SUBST([HAVE_SNPRINTF])
+  if test "$ac_cv_func_newlocale" = yes; then
+    HAVE_NEWLOCALE=1
+  else
+    HAVE_NEWLOCALE=0
+  fi
+  AC_SUBST([HAVE_NEWLOCALE])
+  if test "$ac_cv_func_wprintf" = yes; then
+    HAVE_WPRINTF=1
+  else
+    HAVE_WPRINTF=0
+  fi
+  AC_SUBST([HAVE_WPRINTF])
+
+  AM_LANGINFO_CODESET
+  gt_LC_MESSAGES
+
+  if test $gt_nameless_locales = yes; then
+    HAVE_NAMELESS_LOCALES=1
+  else
+    HAVE_NAMELESS_LOCALES=0
+  fi
+  AC_SUBST([HAVE_NAMELESS_LOCALES])
+
+  dnl Compilation on mingw and Cygwin needs special Makefile rules, because
+  dnl 1. when we install a shared library, we must arrange to export
+  dnl    auxiliary pointer variables for every exported variable,
+  dnl 2. when we install a shared library and a static library simultaneously,
+  dnl    the include file specifies __declspec(dllimport) and therefore we
+  dnl    must arrange to define the auxiliary pointer variables for the
+  dnl    exported variables _also_ in the static library.
+  if test "$enable_shared" = yes; then
+    case "$host_os" in
+      mingw* | cygwin*) is_woe32dll=yes ;;
+      *) is_woe32dll=no ;;
+    esac
+  else
+    is_woe32dll=no
+  fi
+  WOE32DLL=$is_woe32dll
+  AC_SUBST([WOE32DLL])
+
+  dnl On mingw and Cygwin, we can activate special Makefile rules which add
+  dnl version information to the shared libraries and executables.
+  case "$host_os" in
+    mingw* | cygwin*) is_woe32=yes ;;
+    *) is_woe32=no ;;
+  esac
+  WOE32=$is_woe32
+  AC_SUBST([WOE32])
+  if test $WOE32 = yes; then
+    dnl Check for a program that compiles Windows resource files.
+    AC_CHECK_TOOL([WINDRES], [windres])
+  fi
+
+  dnl Rename some macros and functions used for locking.
+  AH_BOTTOM([
+#define __libc_lock_t                   gl_lock_t
+#define __libc_lock_define              gl_lock_define
+#define __libc_lock_define_initialized  gl_lock_define_initialized
+#define __libc_lock_init                gl_lock_init
+#define __libc_lock_lock                gl_lock_lock
+#define __libc_lock_unlock              gl_lock_unlock
+#define __libc_lock_recursive_t                   gl_recursive_lock_t
+#define __libc_lock_define_recursive              gl_recursive_lock_define
+#define __libc_lock_define_initialized_recursive  gl_recursive_lock_define_initialized
+#define __libc_lock_init_recursive                gl_recursive_lock_init
+#define __libc_lock_lock_recursive                gl_recursive_lock_lock
+#define __libc_lock_unlock_recursive              gl_recursive_lock_unlock
+#define glthread_in_use  libintl_thread_in_use
+#define glthread_lock_init_func     libintl_lock_init_func
+#define glthread_lock_lock_func     libintl_lock_lock_func
+#define glthread_lock_unlock_func   libintl_lock_unlock_func
+#define glthread_lock_destroy_func  libintl_lock_destroy_func
+#define glthread_rwlock_init_multithreaded     libintl_rwlock_init_multithreaded
+#define glthread_rwlock_init_func              libintl_rwlock_init_func
+#define glthread_rwlock_rdlock_multithreaded   libintl_rwlock_rdlock_multithreaded
+#define glthread_rwlock_rdlock_func            libintl_rwlock_rdlock_func
+#define glthread_rwlock_wrlock_multithreaded   libintl_rwlock_wrlock_multithreaded
+#define glthread_rwlock_wrlock_func            libintl_rwlock_wrlock_func
+#define glthread_rwlock_unlock_multithreaded   libintl_rwlock_unlock_multithreaded
+#define glthread_rwlock_unlock_func            libintl_rwlock_unlock_func
+#define glthread_rwlock_destroy_multithreaded  libintl_rwlock_destroy_multithreaded
+#define glthread_rwlock_destroy_func           libintl_rwlock_destroy_func
+#define glthread_recursive_lock_init_multithreaded     libintl_recursive_lock_init_multithreaded
+#define glthread_recursive_lock_init_func              libintl_recursive_lock_init_func
+#define glthread_recursive_lock_lock_multithreaded     libintl_recursive_lock_lock_multithreaded
+#define glthread_recursive_lock_lock_func              libintl_recursive_lock_lock_func
+#define glthread_recursive_lock_unlock_multithreaded   libintl_recursive_lock_unlock_multithreaded
+#define glthread_recursive_lock_unlock_func            libintl_recursive_lock_unlock_func
+#define glthread_recursive_lock_destroy_multithreaded  libintl_recursive_lock_destroy_multithreaded
+#define glthread_recursive_lock_destroy_func           libintl_recursive_lock_destroy_func
+#define glthread_once_func            libintl_once_func
+#define glthread_once_singlethreaded  libintl_once_singlethreaded
+#define glthread_once_multithreaded   libintl_once_multithreaded
+])
+])
+
+
+dnl Checks for the core files of the intl subdirectory:
+dnl   dcigettext.c
+dnl   eval-plural.h
+dnl   explodename.c
+dnl   finddomain.c
+dnl   gettextP.h
+dnl   gmo.h
+dnl   hash-string.h hash-string.c
+dnl   l10nflist.c
+dnl   libgnuintl.h.in (except the *printf stuff)
+dnl   loadinfo.h
+dnl   loadmsgcat.c
+dnl   localealias.c
+dnl   log.c
+dnl   plural-exp.h plural-exp.c
+dnl   plural.y
+dnl Used by libglocale.
+AC_DEFUN([gt_INTL_SUBDIR_CORE],
+[
+  AC_REQUIRE([AC_C_INLINE])dnl
+  AC_REQUIRE([AC_TYPE_SIZE_T])dnl
+  AC_REQUIRE([gl_AC_HEADER_STDINT_H])
+  AC_REQUIRE([AC_FUNC_ALLOCA])dnl
+  AC_REQUIRE([AC_FUNC_MMAP])dnl
+  AC_REQUIRE([gt_INTDIV0])dnl
+  AC_REQUIRE([gl_AC_TYPE_UINTMAX_T])dnl
+  AC_REQUIRE([gt_INTTYPES_PRI])dnl
+  AC_REQUIRE([gl_LOCK])dnl
+
+  AC_LINK_IFELSE(
+    [AC_LANG_PROGRAM(
+       [[int foo (int a) { a = __builtin_expect (a, 10); return a == 10 ? 0 : 1; }]],
+       [[]])],
+    [AC_DEFINE([HAVE_BUILTIN_EXPECT], [1],
+       [Define to 1 if the compiler understands __builtin_expect.])])
+
+  AC_CHECK_HEADERS([argz.h inttypes.h limits.h unistd.h sys/param.h])
+  AC_CHECK_FUNCS([getcwd getegid geteuid getgid getuid mempcpy munmap \
+    stpcpy strcasecmp strdup strtoul tsearch argz_count argz_stringify \
+    argz_next __fsetlocking])
+
+  dnl ADDED FOR BASH
+  AC_CHECK_FUNCS([localeconv])
+
+  dnl Use the *_unlocked functions only if they are declared.
+  dnl (because some of them were defined without being declared in Solaris
+  dnl 2.5.1 but were removed in Solaris 2.6, whereas we want binaries built
+  dnl on Solaris 2.5.1 to run on Solaris 2.6).
+  AC_CHECK_DECLS([feof_unlocked, fgets_unlocked], , , [#include <stdio.h>])
+
+  AM_ICONV
+
+  dnl intl/plural.c is generated from intl/plural.y. It requires bison,
+  dnl because plural.y uses bison specific features. It requires at least
+  dnl bison-2.7 for %define api.pure.
+  dnl bison is only needed for the maintainer (who touches plural.y). But in
+  dnl order to avoid separate Makefiles or --enable-maintainer-mode, we put
+  dnl the rule in general Makefile. Now, some people carelessly touch the
+  dnl files or have a broken "make" program, hence the plural.c rule will
+  dnl sometimes fire. To avoid an error, defines BISON to ":" if it is not
+  dnl present or too old.
+  AC_CHECK_PROGS([INTLBISON], [bison])
+  if test -z "$INTLBISON"; then
+    ac_verc_fail=yes
+  else
+    dnl Found it, now check the version.
+    AC_MSG_CHECKING([version of bison])
+changequote(<<,>>)dnl
+    ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison.* \([0-9]*\.[0-9.]*\).*$/\1/p'`
+    case $ac_prog_version in
+      '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;
+      2.[7-9]* | [3-9].*)
+changequote([,])dnl
+         ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;;
+      *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;;
+    esac
+    AC_MSG_RESULT([$ac_prog_version])
+  fi
+  if test $ac_verc_fail = yes; then
+    INTLBISON=:
+  fi
+])
+
+dnl Copies _GL_UNUSED and _GL_ATTRIBUTE_PURE definitions from
+dnl gnulib-common.m4 as a fallback, if the project isn't using Gnulib.
+AC_DEFUN([gt_GL_ATTRIBUTE], [
+  m4_ifndef([gl_[]COMMON],
+    AH_VERBATIM([gt_gl_attribute],
+[/* Define as a marker that can be attached to declarations that might not
+    be used.  This helps to reduce warnings, such as from
+    GCC -Wunused-parameter.  */
+#ifndef _GL_UNUSED
+# if __GNUC__ >= 3 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 7)
+#  define _GL_UNUSED __attribute__ ((__unused__))
+# else
+#  define _GL_UNUSED
+# endif
+#endif
+
+/* The __pure__ attribute was added in gcc 2.96.  */
+#ifndef _GL_ATTRIBUTE_PURE
+# if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 96)
+#  define _GL_ATTRIBUTE_PURE __attribute__ ((__pure__))
+# else
+#  define _GL_ATTRIBUTE_PURE /* empty */
+# endif
+#endif
+]))])
diff --git a/m4/intlmacosx.m4 b/m4/intlmacosx.m4
new file mode 100644
index 0000000..7a47427
--- /dev/null
+++ b/m4/intlmacosx.m4
@@ -0,0 +1,72 @@
+# intlmacosx.m4 serial 6 (gettext-0.19.9)
+dnl Copyright (C) 2004-2014, 2016, 2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Checks for special options needed on Mac OS X.
+dnl Defines INTL_MACOSX_LIBS.
+AC_DEFUN([gt_INTL_MACOSX],
+[
+  dnl Check for API introduced in Mac OS X 10.4.
+  AC_CACHE_CHECK([for CFPreferencesCopyAppValue],
+    [gt_cv_func_CFPreferencesCopyAppValue],
+    [gt_save_LIBS="$LIBS"
+     LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+     AC_LINK_IFELSE(
+       [AC_LANG_PROGRAM(
+          [[#include <CoreFoundation/CFPreferences.h>]],
+          [[CFPreferencesCopyAppValue(NULL, NULL)]])],
+       [gt_cv_func_CFPreferencesCopyAppValue=yes],
+       [gt_cv_func_CFPreferencesCopyAppValue=no])
+     LIBS="$gt_save_LIBS"])
+  if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
+    AC_DEFINE([HAVE_CFPREFERENCESCOPYAPPVALUE], [1],
+      [Define to 1 if you have the Mac OS X function CFPreferencesCopyAppValue in the CoreFoundation framework.])
+  fi
+  dnl Check for API introduced in Mac OS X 10.5.
+  AC_CACHE_CHECK([for CFLocaleCopyCurrent], [gt_cv_func_CFLocaleCopyCurrent],
+    [gt_save_LIBS="$LIBS"
+     LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+     AC_LINK_IFELSE(
+       [AC_LANG_PROGRAM(
+          [[#include <CoreFoundation/CFLocale.h>]],
+          [[CFLocaleCopyCurrent();]])],
+       [gt_cv_func_CFLocaleCopyCurrent=yes],
+       [gt_cv_func_CFLocaleCopyCurrent=no])
+     LIBS="$gt_save_LIBS"])
+  if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+    AC_DEFINE([HAVE_CFLOCALECOPYCURRENT], [1],
+      [Define to 1 if you have the Mac OS X function CFLocaleCopyCurrent in the CoreFoundation framework.])
+  fi
+  AC_CACHE_CHECK([for CFLocaleCopyPreferredLanguages], [gt_cv_func_CFLocaleCopyPreferredLanguages],
+    [gt_save_LIBS="$LIBS"
+     LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+     AC_LINK_IFELSE(
+       [AC_LANG_PROGRAM(
+          [[#include <CoreFoundation/CFLocale.h>]],
+          [[CFLocaleCopyPreferredLanguages();]])],
+       [gt_cv_func_CFLocaleCopyPreferredLanguages=yes],
+       [gt_cv_func_CFLocaleCopyPreferredLanguages=no])
+     LIBS="$gt_save_LIBS"])
+  if test $gt_cv_func_CFLocaleCopyPreferredLanguages = yes; then
+    AC_DEFINE([HAVE_CFLOCALECOPYPREFERREDLANGUAGES], [1],
+      [Define to 1 if you have the Mac OS X function CFLocaleCopyPreferredLanguages in the CoreFoundation framework.])
+  fi
+  INTL_MACOSX_LIBS=
+  if test $gt_cv_func_CFPreferencesCopyAppValue = yes \
+     || test $gt_cv_func_CFLocaleCopyCurrent = yes \
+     || test $gt_cv_func_CFLocaleCopyPreferredLanguages = yes; then
+    INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
+  fi
+  AC_SUBST([INTL_MACOSX_LIBS])
+])
diff --git a/m4/intmax.m4 b/m4/intmax.m4
new file mode 100644
index 0000000..2f4b450
--- /dev/null
+++ b/m4/intmax.m4
@@ -0,0 +1,36 @@
+# intmax.m4 serial 6 (gettext-0.18.2)
+dnl Copyright (C) 2002-2005, 2008-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+dnl Test whether the system has the 'intmax_t' type, but don't attempt to
+dnl find a replacement if it is lacking.
+
+AC_DEFUN([gt_TYPE_INTMAX_T],
+[
+  AC_REQUIRE([gl_AC_HEADER_INTTYPES_H])
+  AC_REQUIRE([gl_AC_HEADER_STDINT_H])
+  AC_CACHE_CHECK([for intmax_t], [gt_cv_c_intmax_t],
+    [AC_COMPILE_IFELSE(
+       [AC_LANG_PROGRAM(
+          [[
+#include <stddef.h>
+#include <stdlib.h>
+#if HAVE_STDINT_H_WITH_UINTMAX
+#include <stdint.h>
+#endif
+#if HAVE_INTTYPES_H_WITH_UINTMAX
+#include <inttypes.h>
+#endif
+          ]],
+          [[intmax_t x = -1;
+            return !x;]])],
+       [gt_cv_c_intmax_t=yes],
+       [gt_cv_c_intmax_t=no])])
+  if test $gt_cv_c_intmax_t = yes; then
+    AC_DEFINE([HAVE_INTMAX_T], [1],
+      [Define if you have the 'intmax_t' type in <stdint.h> or <inttypes.h>.])
+  fi
+])
diff --git a/m4/inttypes-pri.m4 b/m4/inttypes-pri.m4
new file mode 100644
index 0000000..38fe118
--- /dev/null
+++ b/m4/inttypes-pri.m4
@@ -0,0 +1,42 @@
+# inttypes-pri.m4 serial 7 (gettext-0.18.2)
+dnl Copyright (C) 1997-2002, 2006, 2008-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_PREREQ([2.53])
+
+# Define PRI_MACROS_BROKEN if <inttypes.h> exists and defines the PRI*
+# macros to non-string values.  This is the case on AIX 4.3.3.
+
+AC_DEFUN([gt_INTTYPES_PRI],
+[
+  AC_CHECK_HEADERS([inttypes.h])
+  if test $ac_cv_header_inttypes_h = yes; then
+    AC_CACHE_CHECK([whether the inttypes.h PRIxNN macros are broken],
+      [gt_cv_inttypes_pri_broken],
+      [
+        AC_COMPILE_IFELSE(
+          [AC_LANG_PROGRAM(
+             [[
+#include <inttypes.h>
+#ifdef PRId32
+char *p = PRId32;
+#endif
+             ]],
+             [[]])],
+          [gt_cv_inttypes_pri_broken=no],
+          [gt_cv_inttypes_pri_broken=yes])
+      ])
+  fi
+  if test "$gt_cv_inttypes_pri_broken" = yes; then
+    AC_DEFINE_UNQUOTED([PRI_MACROS_BROKEN], [1],
+      [Define if <inttypes.h> exists and defines unusable PRI* macros.])
+    PRI_MACROS_BROKEN=1
+  else
+    PRI_MACROS_BROKEN=0
+  fi
+  AC_SUBST([PRI_MACROS_BROKEN])
+])
diff --git a/m4/inttypes.m4 b/m4/inttypes.m4
new file mode 100644
index 0000000..c58a1be
--- /dev/null
+++ b/m4/inttypes.m4
@@ -0,0 +1,159 @@
+# inttypes.m4 serial 27
+dnl Copyright (C) 2006-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Derek Price, Bruno Haible.
+dnl Test whether <inttypes.h> is supported or must be substituted.
+
+AC_DEFUN([gl_INTTYPES_H],
+[
+  AC_REQUIRE([gl_INTTYPES_INCOMPLETE])
+  gl_INTTYPES_PRI_SCN
+])
+
+AC_DEFUN_ONCE([gl_INTTYPES_INCOMPLETE],
+[
+  AC_REQUIRE([gl_STDINT_H])
+  AC_CHECK_HEADERS_ONCE([inttypes.h])
+
+  dnl Override <inttypes.h> always, so that the portability warnings work.
+  AC_REQUIRE([gl_INTTYPES_H_DEFAULTS])
+  gl_CHECK_NEXT_HEADERS([inttypes.h])
+
+  AC_REQUIRE([gl_MULTIARCH])
+
+  dnl Check for declarations of anything we want to poison if the
+  dnl corresponding gnulib module is not in use.
+  gl_WARN_ON_USE_PREPARE([[#include <inttypes.h>
+    ]], [imaxabs imaxdiv strtoimax strtoumax])
+])
+
+# Ensure that the PRI* and SCN* macros are defined appropriately.
+AC_DEFUN([gl_INTTYPES_PRI_SCN],
+[
+  AC_REQUIRE([gt_INTTYPES_PRI])
+
+  PRIPTR_PREFIX=
+  if test -n "$STDINT_H"; then
+    dnl Using the gnulib <stdint.h>. It always defines intptr_t to 'long'.
+    PRIPTR_PREFIX='"l"'
+  else
+    dnl Using the system's <stdint.h>.
+    for glpfx in '' l ll I64; do
+      case $glpfx in
+        '')  gltype1='int';;
+        l)   gltype1='long int';;
+        ll)  gltype1='long long int';;
+        I64) gltype1='__int64';;
+      esac
+      AC_COMPILE_IFELSE(
+        [AC_LANG_PROGRAM([[#include <stdint.h>
+           extern intptr_t foo;
+           extern $gltype1 foo;]])],
+        [PRIPTR_PREFIX='"'$glpfx'"'])
+      test -n "$PRIPTR_PREFIX" && break
+    done
+  fi
+  AC_SUBST([PRIPTR_PREFIX])
+
+  gl_INTTYPES_CHECK_LONG_LONG_INT_CONDITION(
+    [INT32_MAX_LT_INTMAX_MAX],
+    [defined INT32_MAX && defined INTMAX_MAX],
+    [INT32_MAX < INTMAX_MAX],
+    [sizeof (int) < sizeof (long long int)])
+  if test $APPLE_UNIVERSAL_BUILD = 0; then
+    gl_INTTYPES_CHECK_LONG_LONG_INT_CONDITION(
+      [INT64_MAX_EQ_LONG_MAX],
+      [defined INT64_MAX],
+      [INT64_MAX == LONG_MAX],
+      [sizeof (long long int) == sizeof (long int)])
+  else
+    INT64_MAX_EQ_LONG_MAX=-1
+  fi
+  gl_INTTYPES_CHECK_LONG_LONG_INT_CONDITION(
+    [UINT32_MAX_LT_UINTMAX_MAX],
+    [defined UINT32_MAX && defined UINTMAX_MAX],
+    [UINT32_MAX < UINTMAX_MAX],
+    [sizeof (unsigned int) < sizeof (unsigned long long int)])
+  if test $APPLE_UNIVERSAL_BUILD = 0; then
+    gl_INTTYPES_CHECK_LONG_LONG_INT_CONDITION(
+      [UINT64_MAX_EQ_ULONG_MAX],
+      [defined UINT64_MAX],
+      [UINT64_MAX == ULONG_MAX],
+      [sizeof (unsigned long long int) == sizeof (unsigned long int)])
+  else
+    UINT64_MAX_EQ_ULONG_MAX=-1
+  fi
+])
+
+# Define the symbol $1 to be 1 if the condition is true, 0 otherwise.
+# If $2 is true, the condition is $3; otherwise if long long int is supported
+# approximate the condition with $4; otherwise, assume the condition is false.
+# The condition should work on all C99 platforms; the approximations should be
+# good enough to work on all practical pre-C99 platforms.
+# $2 is evaluated by the C preprocessor, $3 and $4 as compile-time constants.
+AC_DEFUN([gl_INTTYPES_CHECK_LONG_LONG_INT_CONDITION],
+[
+  AC_CACHE_CHECK([whether $3],
+    [gl_cv_test_$1],
+    [AC_COMPILE_IFELSE(
+       [AC_LANG_PROGRAM(
+          [[/* Work also in C++ mode.  */
+            #define __STDC_LIMIT_MACROS 1
+
+            /* Work if build is not clean.  */
+            #define _GL_JUST_INCLUDE_SYSTEM_STDINT_H
+
+            #include <limits.h>
+            #if HAVE_STDINT_H
+             #include <stdint.h>
+            #endif
+
+            #if $2
+             #define CONDITION ($3)
+            #elif HAVE_LONG_LONG_INT
+             #define CONDITION ($4)
+            #else
+             #define CONDITION 0
+            #endif
+            int test[CONDITION ? 1 : -1];]])],
+       [gl_cv_test_$1=yes],
+       [gl_cv_test_$1=no])])
+  if test $gl_cv_test_$1 = yes; then
+    $1=1;
+  else
+    $1=0;
+  fi
+  AC_SUBST([$1])
+])
+
+AC_DEFUN([gl_INTTYPES_MODULE_INDICATOR],
+[
+  dnl Use AC_REQUIRE here, so that the default settings are expanded once only.
+  AC_REQUIRE([gl_INTTYPES_H_DEFAULTS])
+  gl_MODULE_INDICATOR_SET_VARIABLE([$1])
+])
+
+AC_DEFUN([gl_INTTYPES_H_DEFAULTS],
+[
+  GNULIB_IMAXABS=0;      AC_SUBST([GNULIB_IMAXABS])
+  GNULIB_IMAXDIV=0;      AC_SUBST([GNULIB_IMAXDIV])
+  GNULIB_STRTOIMAX=0;    AC_SUBST([GNULIB_STRTOIMAX])
+  GNULIB_STRTOUMAX=0;    AC_SUBST([GNULIB_STRTOUMAX])
+  dnl Assume proper GNU behavior unless another module says otherwise.
+  HAVE_DECL_IMAXABS=1;   AC_SUBST([HAVE_DECL_IMAXABS])
+  HAVE_DECL_IMAXDIV=1;   AC_SUBST([HAVE_DECL_IMAXDIV])
+  HAVE_DECL_STRTOIMAX=1; AC_SUBST([HAVE_DECL_STRTOIMAX])
+  HAVE_DECL_STRTOUMAX=1; AC_SUBST([HAVE_DECL_STRTOUMAX])
+  HAVE_IMAXDIV_T=1;      AC_SUBST([HAVE_IMAXDIV_T])
+  REPLACE_STRTOIMAX=0;   AC_SUBST([REPLACE_STRTOIMAX])
+  REPLACE_STRTOUMAX=0;   AC_SUBST([REPLACE_STRTOUMAX])
+  INT32_MAX_LT_INTMAX_MAX=1;  AC_SUBST([INT32_MAX_LT_INTMAX_MAX])
+  INT64_MAX_EQ_LONG_MAX='defined _LP64';  AC_SUBST([INT64_MAX_EQ_LONG_MAX])
+  PRI_MACROS_BROKEN=0;   AC_SUBST([PRI_MACROS_BROKEN])
+  PRIPTR_PREFIX=__PRIPTR_PREFIX;  AC_SUBST([PRIPTR_PREFIX])
+  UINT32_MAX_LT_UINTMAX_MAX=1;  AC_SUBST([UINT32_MAX_LT_UINTMAX_MAX])
+  UINT64_MAX_EQ_ULONG_MAX='defined _LP64';  AC_SUBST([UINT64_MAX_EQ_ULONG_MAX])
+])
diff --git a/m4/inttypes_h.m4 b/m4/inttypes_h.m4
new file mode 100644
index 0000000..d20422a
--- /dev/null
+++ b/m4/inttypes_h.m4
@@ -0,0 +1,29 @@
+# inttypes_h.m4 serial 10
+dnl Copyright (C) 1997-2004, 2006, 2008-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Paul Eggert.
+
+# Define HAVE_INTTYPES_H_WITH_UINTMAX if <inttypes.h> exists,
+# doesn't clash with <sys/types.h>, and declares uintmax_t.
+
+AC_DEFUN([gl_AC_HEADER_INTTYPES_H],
+[
+  AC_CACHE_CHECK([for inttypes.h], [gl_cv_header_inttypes_h],
+    [AC_COMPILE_IFELSE(
+       [AC_LANG_PROGRAM(
+          [[
+#include <sys/types.h>
+#include <inttypes.h>
+          ]],
+          [[uintmax_t i = (uintmax_t) -1; return !i;]])],
+       [gl_cv_header_inttypes_h=yes],
+       [gl_cv_header_inttypes_h=no])])
+  if test $gl_cv_header_inttypes_h = yes; then
+    AC_DEFINE_UNQUOTED([HAVE_INTTYPES_H_WITH_UINTMAX], [1],
+      [Define if <inttypes.h> exists, doesn't clash with <sys/types.h>,
+       and declares uintmax_t. ])
+  fi
+])
diff --git a/m4/lcmessage.m4 b/m4/lcmessage.m4
new file mode 100644
index 0000000..8d32e10
--- /dev/null
+++ b/m4/lcmessage.m4
@@ -0,0 +1,35 @@
+# lcmessage.m4 serial 7 (gettext-0.18.2)
+dnl Copyright (C) 1995-2002, 2004-2005, 2008-2014, 2016, 2019 Free Software
+dnl Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl   Ulrich Drepper <drepper@cygnus.com>, 1995.
+
+# Check whether LC_MESSAGES is available in <locale.h>.
+
+AC_DEFUN([gt_LC_MESSAGES],
+[
+  AC_CACHE_CHECK([for LC_MESSAGES], [gt_cv_val_LC_MESSAGES],
+    [AC_LINK_IFELSE(
+       [AC_LANG_PROGRAM(
+          [[#include <locale.h>]],
+          [[return LC_MESSAGES]])],
+       [gt_cv_val_LC_MESSAGES=yes],
+       [gt_cv_val_LC_MESSAGES=no])])
+  if test $gt_cv_val_LC_MESSAGES = yes; then
+    AC_DEFINE([HAVE_LC_MESSAGES], [1],
+      [Define if your <locale.h> file defines LC_MESSAGES.])
+  fi
+])
diff --git a/m4/lib-ld.m4 b/m4/lib-ld.m4
new file mode 100644
index 0000000..a187196
--- /dev/null
+++ b/m4/lib-ld.m4
@@ -0,0 +1,168 @@
+# lib-ld.m4 serial 9
+dnl Copyright (C) 1996-2003, 2009-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl Subroutines of libtool.m4,
+dnl with replacements s/_*LT_PATH/AC_LIB_PROG/ and s/lt_/acl_/ to avoid
+dnl collision with libtool.m4.
+
+dnl From libtool-2.4. Sets the variable with_gnu_ld to yes or no.
+AC_DEFUN([AC_LIB_PROG_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], [acl_cv_prog_gnu_ld],
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  acl_cv_prog_gnu_ld=yes
+  ;;
+*)
+  acl_cv_prog_gnu_ld=no
+  ;;
+esac])
+with_gnu_ld=$acl_cv_prog_gnu_ld
+])
+
+dnl From libtool-2.4. Sets the variable LD.
+AC_DEFUN([AC_LIB_PROG_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+
+AC_ARG_WITH([gnu-ld],
+    [AS_HELP_STRING([--with-gnu-ld],
+        [assume the C compiler uses GNU ld [default=no]])],
+    [test "$withval" = no || with_gnu_ld=yes],
+    [with_gnu_ld=no])dnl
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
+  # contains only /bin. Note that ksh looks also at the FPATH variable,
+  # so we have to set that as well for the test.
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+    && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+           || PATH_SEPARATOR=';'
+       }
+fi
+
+if test -n "$LD"; then
+  AC_MSG_CHECKING([for ld])
+elif test "$GCC" = yes; then
+  AC_MSG_CHECKING([for ld used by $CC])
+elif test "$with_gnu_ld" = yes; then
+  AC_MSG_CHECKING([for GNU ld])
+else
+  AC_MSG_CHECKING([for non-GNU ld])
+fi
+if test -n "$LD"; then
+  # Let the user override the test with a path.
+  :
+else
+  AC_CACHE_VAL([acl_cv_path_LD],
+  [
+    acl_cv_path_LD= # Final result of this test
+    ac_prog=ld # Program to search in $PATH
+    if test "$GCC" = yes; then
+      # Check if gcc -print-prog-name=ld gives a path.
+      case $host in
+        *-*-mingw*)
+          # gcc leaves a trailing carriage return which upsets mingw
+          acl_output=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+        *)
+          acl_output=`($CC -print-prog-name=ld) 2>&5` ;;
+      esac
+      case $acl_output in
+        # Accept absolute paths.
+        [[\\/]]* | ?:[[\\/]]*)
+          re_direlt='/[[^/]][[^/]]*/\.\./'
+          # Canonicalize the pathname of ld
+          acl_output=`echo "$acl_output" | sed 's%\\\\%/%g'`
+          while echo "$acl_output" | grep "$re_direlt" > /dev/null 2>&1; do
+            acl_output=`echo $acl_output | sed "s%$re_direlt%/%"`
+          done
+          # Got the pathname. No search in PATH is needed.
+          acl_cv_path_LD="$acl_output"
+          ac_prog=
+          ;;
+        "")
+          # If it fails, then pretend we aren't using GCC.
+          ;;
+        *)
+          # If it is relative, then search for the first ld in PATH.
+          with_gnu_ld=unknown
+          ;;
+      esac
+    fi
+    if test -n "$ac_prog"; then
+      # Search for $ac_prog in $PATH.
+      acl_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+      for ac_dir in $PATH; do
+        IFS="$acl_save_ifs"
+        test -z "$ac_dir" && ac_dir=.
+        if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+          acl_cv_path_LD="$ac_dir/$ac_prog"
+          # Check to see if the program is GNU ld.  I'd rather use --version,
+          # but apparently some variants of GNU ld only accept -v.
+          # Break only if it was the GNU/non-GNU ld that we prefer.
+          case `"$acl_cv_path_LD" -v 2>&1 </dev/null` in
+            *GNU* | *'with BFD'*)
+              test "$with_gnu_ld" != no && break
+              ;;
+            *)
+              test "$with_gnu_ld" != yes && break
+              ;;
+          esac
+        fi
+      done
+      IFS="$acl_save_ifs"
+    fi
+    case $host in
+      *-*-aix*)
+        AC_COMPILE_IFELSE(
+          [AC_LANG_SOURCE(
+             [[#if defined __powerpc64__ || defined _ARCH_PPC64
+                int ok;
+               #else
+                error fail
+               #endif
+             ]])],
+          [# The compiler produces 64-bit code. Add option '-b64' so that the
+           # linker groks 64-bit object files.
+           case "$acl_cv_path_LD " in
+             *" -b64 "*) ;;
+             *) acl_cv_path_LD="$acl_cv_path_LD -b64" ;;
+           esac
+          ], [])
+        ;;
+      sparc64-*-netbsd*)
+        AC_COMPILE_IFELSE(
+          [AC_LANG_SOURCE(
+             [[#if defined __sparcv9 || defined __arch64__
+                int ok;
+               #else
+                error fail
+               #endif
+             ]])],
+          [],
+          [# The compiler produces 32-bit code. Add option '-m elf32_sparc'
+           # so that the linker groks 32-bit object files.
+           case "$acl_cv_path_LD " in
+             *" -m elf32_sparc "*) ;;
+             *) acl_cv_path_LD="$acl_cv_path_LD -m elf32_sparc" ;;
+           esac
+          ])
+        ;;
+    esac
+  ])
+  LD="$acl_cv_path_LD"
+fi
+if test -n "$LD"; then
+  AC_MSG_RESULT([$LD])
+else
+  AC_MSG_RESULT([no])
+  AC_MSG_ERROR([no acceptable ld found in \$PATH])
+fi
+AC_LIB_PROG_LD_GNU
+])
diff --git a/m4/lib-link.m4 b/m4/lib-link.m4
new file mode 100644
index 0000000..0ff1073
--- /dev/null
+++ b/m4/lib-link.m4
@@ -0,0 +1,774 @@
+# lib-link.m4 serial 28
+dnl Copyright (C) 2001-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_PREREQ([2.61])
+
+dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
+dnl augments the CPPFLAGS variable.
+dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
+dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
+AC_DEFUN([AC_LIB_LINKFLAGS],
+[
+  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+  AC_REQUIRE([AC_LIB_RPATH])
+  pushdef([Name],[m4_translit([$1],[./+-], [____])])
+  pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-],
+                                   [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
+  AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
+    AC_LIB_LINKFLAGS_BODY([$1], [$2])
+    ac_cv_lib[]Name[]_libs="$LIB[]NAME"
+    ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
+    ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
+    ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX"
+  ])
+  LIB[]NAME="$ac_cv_lib[]Name[]_libs"
+  LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
+  INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
+  LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix"
+  AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+  AC_SUBST([LIB]NAME)
+  AC_SUBST([LTLIB]NAME)
+  AC_SUBST([LIB]NAME[_PREFIX])
+  dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
+  dnl results of this search when this library appears as a dependency.
+  HAVE_LIB[]NAME=yes
+  popdef([NAME])
+  popdef([Name])
+])
+
+dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode, [missing-message])
+dnl searches for libname and the libraries corresponding to explicit and
+dnl implicit dependencies, together with the specified include files and
+dnl the ability to compile and link the specified testcode. The missing-message
+dnl defaults to 'no' and may contain additional hints for the user.
+dnl If found, it sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME}
+dnl and LTLIB${NAME} variables and augments the CPPFLAGS variable, and
+dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
+dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
+dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
+dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
+AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
+[
+  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+  AC_REQUIRE([AC_LIB_RPATH])
+  pushdef([Name],[m4_translit([$1],[./+-], [____])])
+  pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-],
+                                   [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
+
+  dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
+  dnl accordingly.
+  AC_LIB_LINKFLAGS_BODY([$1], [$2])
+
+  dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
+  dnl because if the user has installed lib[]Name and not disabled its use
+  dnl via --without-lib[]Name-prefix, he wants to use it.
+  ac_save_CPPFLAGS="$CPPFLAGS"
+  AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+
+  AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
+    ac_save_LIBS="$LIBS"
+    dnl If $LIB[]NAME contains some -l options, add it to the end of LIBS,
+    dnl because these -l options might require -L options that are present in
+    dnl LIBS. -l options benefit only from the -L options listed before it.
+    dnl Otherwise, add it to the front of LIBS, because it may be a static
+    dnl library that depends on another static library that is present in LIBS.
+    dnl Static libraries benefit only from the static libraries listed after
+    dnl it.
+    case " $LIB[]NAME" in
+      *" -l"*) LIBS="$LIBS $LIB[]NAME" ;;
+      *)       LIBS="$LIB[]NAME $LIBS" ;;
+    esac
+    AC_LINK_IFELSE(
+      [AC_LANG_PROGRAM([[$3]], [[$4]])],
+      [ac_cv_lib[]Name=yes],
+      [ac_cv_lib[]Name='m4_if([$5], [], [no], [[$5]])'])
+    LIBS="$ac_save_LIBS"
+  ])
+  if test "$ac_cv_lib[]Name" = yes; then
+    HAVE_LIB[]NAME=yes
+    AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the lib][$1 library.])
+    AC_MSG_CHECKING([how to link with lib[]$1])
+    AC_MSG_RESULT([$LIB[]NAME])
+  else
+    HAVE_LIB[]NAME=no
+    dnl If $LIB[]NAME didn't lead to a usable library, we don't need
+    dnl $INC[]NAME either.
+    CPPFLAGS="$ac_save_CPPFLAGS"
+    LIB[]NAME=
+    LTLIB[]NAME=
+    LIB[]NAME[]_PREFIX=
+  fi
+  AC_SUBST([HAVE_LIB]NAME)
+  AC_SUBST([LIB]NAME)
+  AC_SUBST([LTLIB]NAME)
+  AC_SUBST([LIB]NAME[_PREFIX])
+  popdef([NAME])
+  popdef([Name])
+])
+
+dnl Determine the platform dependent parameters needed to use rpath:
+dnl   acl_libext,
+dnl   acl_shlibext,
+dnl   acl_libname_spec,
+dnl   acl_library_names_spec,
+dnl   acl_hardcode_libdir_flag_spec,
+dnl   acl_hardcode_libdir_separator,
+dnl   acl_hardcode_direct,
+dnl   acl_hardcode_minus_L.
+AC_DEFUN([AC_LIB_RPATH],
+[
+  dnl Complain if config.rpath is missing.
+  AC_REQUIRE_AUX_FILE([config.rpath])
+  AC_REQUIRE([AC_PROG_CC])                dnl we use $CC, $GCC, $LDFLAGS
+  AC_REQUIRE([AC_LIB_PROG_LD])            dnl we use $LD, $with_gnu_ld
+  AC_REQUIRE([AC_CANONICAL_HOST])         dnl we use $host
+  AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
+  AC_CACHE_CHECK([for shared library run path origin], [acl_cv_rpath], [
+    CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+    ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+    . ./conftest.sh
+    rm -f ./conftest.sh
+    acl_cv_rpath=done
+  ])
+  wl="$acl_cv_wl"
+  acl_libext="$acl_cv_libext"
+  acl_shlibext="$acl_cv_shlibext"
+  acl_libname_spec="$acl_cv_libname_spec"
+  acl_library_names_spec="$acl_cv_library_names_spec"
+  acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+  acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+  acl_hardcode_direct="$acl_cv_hardcode_direct"
+  acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
+  dnl Determine whether the user wants rpath handling at all.
+  AC_ARG_ENABLE([rpath],
+    [  --disable-rpath         do not hardcode runtime library paths],
+    :, enable_rpath=yes)
+])
+
+dnl AC_LIB_FROMPACKAGE(name, package)
+dnl declares that libname comes from the given package. The configure file
+dnl will then not have a --with-libname-prefix option but a
+dnl --with-package-prefix option. Several libraries can come from the same
+dnl package. This declaration must occur before an AC_LIB_LINKFLAGS or similar
+dnl macro call that searches for libname.
+AC_DEFUN([AC_LIB_FROMPACKAGE],
+[
+  pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-],
+                                   [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
+  define([acl_frompackage_]NAME, [$2])
+  popdef([NAME])
+  pushdef([PACK],[$2])
+  pushdef([PACKUP],[m4_translit(PACK,[abcdefghijklmnopqrstuvwxyz./+-],
+                                     [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
+  define([acl_libsinpackage_]PACKUP,
+    m4_ifdef([acl_libsinpackage_]PACKUP, [m4_defn([acl_libsinpackage_]PACKUP)[, ]],)[lib$1])
+  popdef([PACKUP])
+  popdef([PACK])
+])
+
+dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
+dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found
+dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
+AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
+[
+  AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
+  pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-],
+                                   [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
+  pushdef([PACK],[m4_ifdef([acl_frompackage_]NAME, [acl_frompackage_]NAME, lib[$1])])
+  pushdef([PACKUP],[m4_translit(PACK,[abcdefghijklmnopqrstuvwxyz./+-],
+                                     [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
+  pushdef([PACKLIBS],[m4_ifdef([acl_frompackage_]NAME, [acl_libsinpackage_]PACKUP, lib[$1])])
+  dnl By default, look in $includedir and $libdir.
+  use_additional=yes
+  AC_LIB_WITH_FINAL_PREFIX([
+    eval additional_includedir=\"$includedir\"
+    eval additional_libdir=\"$libdir\"
+  ])
+  AC_ARG_WITH(PACK[-prefix],
+[[  --with-]]PACK[[-prefix[=DIR]  search for ]PACKLIBS[ in DIR/include and DIR/lib
+  --without-]]PACK[[-prefix     don't search for ]PACKLIBS[ in includedir and libdir]],
+[
+    if test "X$withval" = "Xno"; then
+      use_additional=no
+    else
+      if test "X$withval" = "X"; then
+        AC_LIB_WITH_FINAL_PREFIX([
+          eval additional_includedir=\"$includedir\"
+          eval additional_libdir=\"$libdir\"
+        ])
+      else
+        additional_includedir="$withval/include"
+        additional_libdir="$withval/$acl_libdirstem"
+        if test "$acl_libdirstem2" != "$acl_libdirstem" \
+           && test ! -d "$withval/$acl_libdirstem"; then
+          additional_libdir="$withval/$acl_libdirstem2"
+        fi
+      fi
+    fi
+])
+  dnl Search the library and its dependencies in $additional_libdir and
+  dnl $LDFLAGS. Using breadth-first-seach.
+  LIB[]NAME=
+  LTLIB[]NAME=
+  INC[]NAME=
+  LIB[]NAME[]_PREFIX=
+  dnl HAVE_LIB${NAME} is an indicator that LIB${NAME}, LTLIB${NAME} have been
+  dnl computed. So it has to be reset here.
+  HAVE_LIB[]NAME=
+  rpathdirs=
+  ltrpathdirs=
+  names_already_handled=
+  names_next_round='$1 $2'
+  while test -n "$names_next_round"; do
+    names_this_round="$names_next_round"
+    names_next_round=
+    for name in $names_this_round; do
+      already_handled=
+      for n in $names_already_handled; do
+        if test "$n" = "$name"; then
+          already_handled=yes
+          break
+        fi
+      done
+      if test -z "$already_handled"; then
+        names_already_handled="$names_already_handled $name"
+        dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
+        dnl or AC_LIB_HAVE_LINKFLAGS call.
+        uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'`
+        eval value=\"\$HAVE_LIB$uppername\"
+        if test -n "$value"; then
+          if test "$value" = yes; then
+            eval value=\"\$LIB$uppername\"
+            test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
+            eval value=\"\$LTLIB$uppername\"
+            test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
+          else
+            dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
+            dnl that this library doesn't exist. So just drop it.
+            :
+          fi
+        else
+          dnl Search the library lib$name in $additional_libdir and $LDFLAGS
+          dnl and the already constructed $LIBNAME/$LTLIBNAME.
+          found_dir=
+          found_la=
+          found_so=
+          found_a=
+          eval libname=\"$acl_libname_spec\"    # typically: libname=lib$name
+          if test -n "$acl_shlibext"; then
+            shrext=".$acl_shlibext"             # typically: shrext=.so
+          else
+            shrext=
+          fi
+          if test $use_additional = yes; then
+            dir="$additional_libdir"
+            dnl The same code as in the loop below:
+            dnl First look for a shared library.
+            if test -n "$acl_shlibext"; then
+              if test -f "$dir/$libname$shrext"; then
+                found_dir="$dir"
+                found_so="$dir/$libname$shrext"
+              else
+                if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                  ver=`(cd "$dir" && \
+                        for f in "$libname$shrext".*; do echo "$f"; done \
+                        | sed -e "s,^$libname$shrext\\\\.,," \
+                        | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                        | sed 1q ) 2>/dev/null`
+                  if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                    found_dir="$dir"
+                    found_so="$dir/$libname$shrext.$ver"
+                  fi
+                else
+                  eval library_names=\"$acl_library_names_spec\"
+                  for f in $library_names; do
+                    if test -f "$dir/$f"; then
+                      found_dir="$dir"
+                      found_so="$dir/$f"
+                      break
+                    fi
+                  done
+                fi
+              fi
+            fi
+            dnl Then look for a static library.
+            if test "X$found_dir" = "X"; then
+              if test -f "$dir/$libname.$acl_libext"; then
+                found_dir="$dir"
+                found_a="$dir/$libname.$acl_libext"
+              fi
+            fi
+            if test "X$found_dir" != "X"; then
+              if test -f "$dir/$libname.la"; then
+                found_la="$dir/$libname.la"
+              fi
+            fi
+          fi
+          if test "X$found_dir" = "X"; then
+            for x in $LDFLAGS $LTLIB[]NAME; do
+              AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+              case "$x" in
+                -L*)
+                  dir=`echo "X$x" | sed -e 's/^X-L//'`
+                  dnl First look for a shared library.
+                  if test -n "$acl_shlibext"; then
+                    if test -f "$dir/$libname$shrext"; then
+                      found_dir="$dir"
+                      found_so="$dir/$libname$shrext"
+                    else
+                      if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                        ver=`(cd "$dir" && \
+                              for f in "$libname$shrext".*; do echo "$f"; done \
+                              | sed -e "s,^$libname$shrext\\\\.,," \
+                              | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                              | sed 1q ) 2>/dev/null`
+                        if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                          found_dir="$dir"
+                          found_so="$dir/$libname$shrext.$ver"
+                        fi
+                      else
+                        eval library_names=\"$acl_library_names_spec\"
+                        for f in $library_names; do
+                          if test -f "$dir/$f"; then
+                            found_dir="$dir"
+                            found_so="$dir/$f"
+                            break
+                          fi
+                        done
+                      fi
+                    fi
+                  fi
+                  dnl Then look for a static library.
+                  if test "X$found_dir" = "X"; then
+                    if test -f "$dir/$libname.$acl_libext"; then
+                      found_dir="$dir"
+                      found_a="$dir/$libname.$acl_libext"
+                    fi
+                  fi
+                  if test "X$found_dir" != "X"; then
+                    if test -f "$dir/$libname.la"; then
+                      found_la="$dir/$libname.la"
+                    fi
+                  fi
+                  ;;
+              esac
+              if test "X$found_dir" != "X"; then
+                break
+              fi
+            done
+          fi
+          if test "X$found_dir" != "X"; then
+            dnl Found the library.
+            LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
+            if test "X$found_so" != "X"; then
+              dnl Linking with a shared library. We attempt to hardcode its
+              dnl directory into the executable's runpath, unless it's the
+              dnl standard /usr/lib.
+              if test "$enable_rpath" = no \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem" \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
+                dnl No hardcoding is needed.
+                LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+              else
+                dnl Use an explicit option to hardcode DIR into the resulting
+                dnl binary.
+                dnl Potentially add DIR to ltrpathdirs.
+                dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+                haveit=
+                for x in $ltrpathdirs; do
+                  if test "X$x" = "X$found_dir"; then
+                    haveit=yes
+                    break
+                  fi
+                done
+                if test -z "$haveit"; then
+                  ltrpathdirs="$ltrpathdirs $found_dir"
+                fi
+                dnl The hardcoding into $LIBNAME is system dependent.
+                if test "$acl_hardcode_direct" = yes; then
+                  dnl Using DIR/libNAME.so during linking hardcodes DIR into the
+                  dnl resulting binary.
+                  LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+                else
+                  if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+                    dnl Use an explicit option to hardcode DIR into the resulting
+                    dnl binary.
+                    LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+                    dnl Potentially add DIR to rpathdirs.
+                    dnl The rpathdirs will be appended to $LIBNAME at the end.
+                    haveit=
+                    for x in $rpathdirs; do
+                      if test "X$x" = "X$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      rpathdirs="$rpathdirs $found_dir"
+                    fi
+                  else
+                    dnl Rely on "-L$found_dir".
+                    dnl But don't add it if it's already contained in the LDFLAGS
+                    dnl or the already constructed $LIBNAME
+                    haveit=
+                    for x in $LDFLAGS $LIB[]NAME; do
+                      AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+                      if test "X$x" = "X-L$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
+                    fi
+                    if test "$acl_hardcode_minus_L" != no; then
+                      dnl FIXME: Not sure whether we should use
+                      dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+                      dnl here.
+                      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+                    else
+                      dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH
+                      dnl here, because this doesn't fit in flags passed to the
+                      dnl compiler. So give up. No hardcoding. This affects only
+                      dnl very old systems.
+                      dnl FIXME: Not sure whether we should use
+                      dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+                      dnl here.
+                      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+                    fi
+                  fi
+                fi
+              fi
+            else
+              if test "X$found_a" != "X"; then
+                dnl Linking with a static library.
+                LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
+              else
+                dnl We shouldn't come here, but anyway it's good to have a
+                dnl fallback.
+                LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
+              fi
+            fi
+            dnl Assume the include files are nearby.
+            additional_includedir=
+            case "$found_dir" in
+              */$acl_libdirstem | */$acl_libdirstem/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
+                if test "$name" = '$1'; then
+                  LIB[]NAME[]_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+              */$acl_libdirstem2 | */$acl_libdirstem2/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
+                if test "$name" = '$1'; then
+                  LIB[]NAME[]_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+            esac
+            if test "X$additional_includedir" != "X"; then
+              dnl Potentially add $additional_includedir to $INCNAME.
+              dnl But don't add it
+              dnl   1. if it's the standard /usr/include,
+              dnl   2. if it's /usr/local/include and we are using GCC on Linux,
+              dnl   3. if it's already present in $CPPFLAGS or the already
+              dnl      constructed $INCNAME,
+              dnl   4. if it doesn't exist as a directory.
+              if test "X$additional_includedir" != "X/usr/include"; then
+                haveit=
+                if test "X$additional_includedir" = "X/usr/local/include"; then
+                  if test -n "$GCC"; then
+                    case $host_os in
+                      linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                    esac
+                  fi
+                fi
+                if test -z "$haveit"; then
+                  for x in $CPPFLAGS $INC[]NAME; do
+                    AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+                    if test "X$x" = "X-I$additional_includedir"; then
+                      haveit=yes
+                      break
+                    fi
+                  done
+                  if test -z "$haveit"; then
+                    if test -d "$additional_includedir"; then
+                      dnl Really add $additional_includedir to $INCNAME.
+                      INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
+                    fi
+                  fi
+                fi
+              fi
+            fi
+            dnl Look for dependencies.
+            if test -n "$found_la"; then
+              dnl Read the .la file. It defines the variables
+              dnl dlname, library_names, old_library, dependency_libs, current,
+              dnl age, revision, installed, dlopen, dlpreopen, libdir.
+              save_libdir="$libdir"
+              case "$found_la" in
+                */* | *\\*) . "$found_la" ;;
+                *) . "./$found_la" ;;
+              esac
+              libdir="$save_libdir"
+              dnl We use only dependency_libs.
+              for dep in $dependency_libs; do
+                case "$dep" in
+                  -L*)
+                    additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+                    dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
+                    dnl But don't add it
+                    dnl   1. if it's the standard /usr/lib,
+                    dnl   2. if it's /usr/local/lib and we are using GCC on Linux,
+                    dnl   3. if it's already present in $LDFLAGS or the already
+                    dnl      constructed $LIBNAME,
+                    dnl   4. if it doesn't exist as a directory.
+                    if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
+                       && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
+                      haveit=
+                      if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
+                         || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
+                        if test -n "$GCC"; then
+                          case $host_os in
+                            linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                          esac
+                        fi
+                      fi
+                      if test -z "$haveit"; then
+                        haveit=
+                        for x in $LDFLAGS $LIB[]NAME; do
+                          AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                            dnl Really add $additional_libdir to $LIBNAME.
+                            LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
+                          fi
+                        fi
+                        haveit=
+                        for x in $LDFLAGS $LTLIB[]NAME; do
+                          AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                            dnl Really add $additional_libdir to $LTLIBNAME.
+                            LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
+                          fi
+                        fi
+                      fi
+                    fi
+                    ;;
+                  -R*)
+                    dir=`echo "X$dep" | sed -e 's/^X-R//'`
+                    if test "$enable_rpath" != no; then
+                      dnl Potentially add DIR to rpathdirs.
+                      dnl The rpathdirs will be appended to $LIBNAME at the end.
+                      haveit=
+                      for x in $rpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        rpathdirs="$rpathdirs $dir"
+                      fi
+                      dnl Potentially add DIR to ltrpathdirs.
+                      dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+                      haveit=
+                      for x in $ltrpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        ltrpathdirs="$ltrpathdirs $dir"
+                      fi
+                    fi
+                    ;;
+                  -l*)
+                    dnl Handle this in the next round.
+                    names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+                    ;;
+                  *.la)
+                    dnl Handle this in the next round. Throw away the .la's
+                    dnl directory; it is already contained in a preceding -L
+                    dnl option.
+                    names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+                    ;;
+                  *)
+                    dnl Most likely an immediate library name.
+                    LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
+                    LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
+                    ;;
+                esac
+              done
+            fi
+          else
+            dnl Didn't find the library; assume it is in the system directories
+            dnl known to the linker and runtime loader. (All the system
+            dnl directories known to the linker should also be known to the
+            dnl runtime loader, otherwise the system is severely misconfigured.)
+            LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+            LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
+          fi
+        fi
+      fi
+    done
+  done
+  if test "X$rpathdirs" != "X"; then
+    if test -n "$acl_hardcode_libdir_separator"; then
+      dnl Weird platform: only the last -rpath option counts, the user must
+      dnl pass all path elements in one option. We can arrange that for a
+      dnl single library, but not when more than one $LIBNAMEs are used.
+      alldirs=
+      for found_dir in $rpathdirs; do
+        alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
+      done
+      dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl.
+      acl_save_libdir="$libdir"
+      libdir="$alldirs"
+      eval flag=\"$acl_hardcode_libdir_flag_spec\"
+      libdir="$acl_save_libdir"
+      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+    else
+      dnl The -rpath options are cumulative.
+      for found_dir in $rpathdirs; do
+        acl_save_libdir="$libdir"
+        libdir="$found_dir"
+        eval flag=\"$acl_hardcode_libdir_flag_spec\"
+        libdir="$acl_save_libdir"
+        LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+      done
+    fi
+  fi
+  if test "X$ltrpathdirs" != "X"; then
+    dnl When using libtool, the option that works for both libraries and
+    dnl executables is -R. The -R options are cumulative.
+    for found_dir in $ltrpathdirs; do
+      LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
+    done
+  fi
+  popdef([PACKLIBS])
+  popdef([PACKUP])
+  popdef([PACK])
+  popdef([NAME])
+])
+
+dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
+dnl unless already present in VAR.
+dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
+dnl contains two or three consecutive elements that belong together.
+AC_DEFUN([AC_LIB_APPENDTOVAR],
+[
+  for element in [$2]; do
+    haveit=
+    for x in $[$1]; do
+      AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+      if test "X$x" = "X$element"; then
+        haveit=yes
+        break
+      fi
+    done
+    if test -z "$haveit"; then
+      [$1]="${[$1]}${[$1]:+ }$element"
+    fi
+  done
+])
+
+dnl For those cases where a variable contains several -L and -l options
+dnl referring to unknown libraries and directories, this macro determines the
+dnl necessary additional linker options for the runtime path.
+dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL])
+dnl sets LDADDVAR to linker options needed together with LIBSVALUE.
+dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed,
+dnl otherwise linking without libtool is assumed.
+AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS],
+[
+  AC_REQUIRE([AC_LIB_RPATH])
+  AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
+  $1=
+  if test "$enable_rpath" != no; then
+    if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+      dnl Use an explicit option to hardcode directories into the resulting
+      dnl binary.
+      rpathdirs=
+      next=
+      for opt in $2; do
+        if test -n "$next"; then
+          dir="$next"
+          dnl No need to hardcode the standard /usr/lib.
+          if test "X$dir" != "X/usr/$acl_libdirstem" \
+             && test "X$dir" != "X/usr/$acl_libdirstem2"; then
+            rpathdirs="$rpathdirs $dir"
+          fi
+          next=
+        else
+          case $opt in
+            -L) next=yes ;;
+            -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'`
+                 dnl No need to hardcode the standard /usr/lib.
+                 if test "X$dir" != "X/usr/$acl_libdirstem" \
+                    && test "X$dir" != "X/usr/$acl_libdirstem2"; then
+                   rpathdirs="$rpathdirs $dir"
+                 fi
+                 next= ;;
+            *) next= ;;
+          esac
+        fi
+      done
+      if test "X$rpathdirs" != "X"; then
+        if test -n ""$3""; then
+          dnl libtool is used for linking. Use -R options.
+          for dir in $rpathdirs; do
+            $1="${$1}${$1:+ }-R$dir"
+          done
+        else
+          dnl The linker is used for linking directly.
+          if test -n "$acl_hardcode_libdir_separator"; then
+            dnl Weird platform: only the last -rpath option counts, the user
+            dnl must pass all path elements in one option.
+            alldirs=
+            for dir in $rpathdirs; do
+              alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir"
+            done
+            acl_save_libdir="$libdir"
+            libdir="$alldirs"
+            eval flag=\"$acl_hardcode_libdir_flag_spec\"
+            libdir="$acl_save_libdir"
+            $1="$flag"
+          else
+            dnl The -rpath options are cumulative.
+            for dir in $rpathdirs; do
+              acl_save_libdir="$libdir"
+              libdir="$dir"
+              eval flag=\"$acl_hardcode_libdir_flag_spec\"
+              libdir="$acl_save_libdir"
+              $1="${$1}${$1:+ }$flag"
+            done
+          fi
+        fi
+      fi
+    fi
+  fi
+  AC_SUBST([$1])
+])
diff --git a/m4/lib-prefix.m4 b/m4/lib-prefix.m4
new file mode 100644
index 0000000..8adb17b
--- /dev/null
+++ b/m4/lib-prefix.m4
@@ -0,0 +1,249 @@
+# lib-prefix.m4 serial 14
+dnl Copyright (C) 2001-2005, 2008-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
+dnl to access previously installed libraries. The basic assumption is that
+dnl a user will want packages to use other packages he previously installed
+dnl with the same --prefix option.
+dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
+dnl libraries, but is otherwise very convenient.
+AC_DEFUN([AC_LIB_PREFIX],
+[
+  AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
+  AC_REQUIRE([AC_PROG_CC])
+  AC_REQUIRE([AC_CANONICAL_HOST])
+  AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
+  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+  dnl By default, look in $includedir and $libdir.
+  use_additional=yes
+  AC_LIB_WITH_FINAL_PREFIX([
+    eval additional_includedir=\"$includedir\"
+    eval additional_libdir=\"$libdir\"
+  ])
+  AC_ARG_WITH([lib-prefix],
+[[  --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
+  --without-lib-prefix    don't search for libraries in includedir and libdir]],
+[
+    if test "X$withval" = "Xno"; then
+      use_additional=no
+    else
+      if test "X$withval" = "X"; then
+        AC_LIB_WITH_FINAL_PREFIX([
+          eval additional_includedir=\"$includedir\"
+          eval additional_libdir=\"$libdir\"
+        ])
+      else
+        additional_includedir="$withval/include"
+        additional_libdir="$withval/$acl_libdirstem"
+      fi
+    fi
+])
+  if test $use_additional = yes; then
+    dnl Potentially add $additional_includedir to $CPPFLAGS.
+    dnl But don't add it
+    dnl   1. if it's the standard /usr/include,
+    dnl   2. if it's already present in $CPPFLAGS,
+    dnl   3. if it's /usr/local/include and we are using GCC on Linux,
+    dnl   4. if it doesn't exist as a directory.
+    if test "X$additional_includedir" != "X/usr/include"; then
+      haveit=
+      for x in $CPPFLAGS; do
+        AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+        if test "X$x" = "X-I$additional_includedir"; then
+          haveit=yes
+          break
+        fi
+      done
+      if test -z "$haveit"; then
+        if test "X$additional_includedir" = "X/usr/local/include"; then
+          if test -n "$GCC"; then
+            case $host_os in
+              linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+            esac
+          fi
+        fi
+        if test -z "$haveit"; then
+          if test -d "$additional_includedir"; then
+            dnl Really add $additional_includedir to $CPPFLAGS.
+            CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
+          fi
+        fi
+      fi
+    fi
+    dnl Potentially add $additional_libdir to $LDFLAGS.
+    dnl But don't add it
+    dnl   1. if it's the standard /usr/lib,
+    dnl   2. if it's already present in $LDFLAGS,
+    dnl   3. if it's /usr/local/lib and we are using GCC on Linux,
+    dnl   4. if it doesn't exist as a directory.
+    if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
+      haveit=
+      for x in $LDFLAGS; do
+        AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+        if test "X$x" = "X-L$additional_libdir"; then
+          haveit=yes
+          break
+        fi
+      done
+      if test -z "$haveit"; then
+        if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
+          if test -n "$GCC"; then
+            case $host_os in
+              linux*) haveit=yes;;
+            esac
+          fi
+        fi
+        if test -z "$haveit"; then
+          if test -d "$additional_libdir"; then
+            dnl Really add $additional_libdir to $LDFLAGS.
+            LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
+          fi
+        fi
+      fi
+    fi
+  fi
+])
+
+dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
+dnl acl_final_exec_prefix, containing the values to which $prefix and
+dnl $exec_prefix will expand at the end of the configure script.
+AC_DEFUN([AC_LIB_PREPARE_PREFIX],
+[
+  dnl Unfortunately, prefix and exec_prefix get only finally determined
+  dnl at the end of configure.
+  if test "X$prefix" = "XNONE"; then
+    acl_final_prefix="$ac_default_prefix"
+  else
+    acl_final_prefix="$prefix"
+  fi
+  if test "X$exec_prefix" = "XNONE"; then
+    acl_final_exec_prefix='${prefix}'
+  else
+    acl_final_exec_prefix="$exec_prefix"
+  fi
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+  prefix="$acl_save_prefix"
+])
+
+dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
+dnl variables prefix and exec_prefix bound to the values they will have
+dnl at the end of the configure script.
+AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
+[
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  $1
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+])
+
+dnl AC_LIB_PREPARE_MULTILIB creates
+dnl - a variable acl_libdirstem, containing the basename of the libdir, either
+dnl   "lib" or "lib64" or "lib/64",
+dnl - a variable acl_libdirstem2, as a secondary possible value for
+dnl   acl_libdirstem, either the same as acl_libdirstem or "lib/sparcv9" or
+dnl   "lib/amd64".
+AC_DEFUN([AC_LIB_PREPARE_MULTILIB],
+[
+  dnl There is no formal standard regarding lib and lib64.
+  dnl On glibc systems, the current practice is that on a system supporting
+  dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under
+  dnl $prefix/lib64 and 32-bit libraries go under $prefix/lib. We determine
+  dnl the compiler's default mode by looking at the compiler's library search
+  dnl path. If at least one of its elements ends in /lib64 or points to a
+  dnl directory whose absolute pathname ends in /lib64, we assume a 64-bit ABI.
+  dnl Otherwise we use the default, namely "lib".
+  dnl On Solaris systems, the current practice is that on a system supporting
+  dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under
+  dnl $prefix/lib/64 (which is a symlink to either $prefix/lib/sparcv9 or
+  dnl $prefix/lib/amd64) and 32-bit libraries go under $prefix/lib.
+  AC_REQUIRE([AC_CANONICAL_HOST])
+  AC_REQUIRE([gl_HOST_CPU_C_ABI_32BIT])
+
+  case "$host_os" in
+    solaris*)
+      AC_CACHE_CHECK([for 64-bit host], [gl_cv_solaris_64bit],
+        [AC_COMPILE_IFELSE(
+           [AC_LANG_SOURCE(
+              [[#ifdef _LP64
+                 int ok;
+                #else
+                 error fail
+                #endif
+              ]])],
+           [gl_cv_solaris_64bit=yes],
+           [gl_cv_solaris_64bit=no])
+        ]);;
+  esac
+
+  dnl Allow the user to override the result by setting acl_cv_libdirstems.
+  AC_CACHE_CHECK([for the common suffixes of directories in the library search path],
+    [acl_cv_libdirstems],
+    [acl_libdirstem=lib
+     acl_libdirstem2=
+     case "$host_os" in
+       solaris*)
+         dnl See Solaris 10 Software Developer Collection > Solaris 64-bit Developer's Guide > The Development Environment
+         dnl <https://docs.oracle.com/cd/E19253-01/816-5138/dev-env/index.html>.
+         dnl "Portable Makefiles should refer to any library directories using the 64 symbolic link."
+         dnl But we want to recognize the sparcv9 or amd64 subdirectory also if the
+         dnl symlink is missing, so we set acl_libdirstem2 too.
+         if test $gl_cv_solaris_64bit = yes; then
+           acl_libdirstem=lib/64
+           case "$host_cpu" in
+             sparc*)        acl_libdirstem2=lib/sparcv9 ;;
+             i*86 | x86_64) acl_libdirstem2=lib/amd64 ;;
+           esac
+         fi
+         ;;
+       *)
+         dnl If $CC generates code for a 32-bit ABI, the libraries are
+         dnl surely under $prefix/lib, not $prefix/lib64.
+         if test "$HOST_CPU_C_ABI_32BIT" != yes; then
+           dnl The result is a property of the system. However, non-system
+           dnl compilers sometimes have odd library search paths. Therefore
+           dnl prefer asking /usr/bin/gcc, if available, rather than $CC.
+           searchpath=`(if test -f /usr/bin/gcc \
+                           && LC_ALL=C /usr/bin/gcc -print-search-dirs >/dev/null 2>/dev/null; then \
+                          LC_ALL=C /usr/bin/gcc -print-search-dirs; \
+                        else \
+                          LC_ALL=C $CC -print-search-dirs; \
+                        fi) 2>/dev/null \
+                       | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
+           if test -n "$searchpath"; then
+             acl_save_IFS="${IFS= 	}"; IFS=":"
+             for searchdir in $searchpath; do
+               if test -d "$searchdir"; then
+                 case "$searchdir" in
+                   */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
+                   */../ | */.. )
+                     # Better ignore directories of this form. They are misleading.
+                     ;;
+                   *) searchdir=`cd "$searchdir" && pwd`
+                      case "$searchdir" in
+                        */lib64 ) acl_libdirstem=lib64 ;;
+                      esac ;;
+                 esac
+               fi
+             done
+             IFS="$acl_save_IFS"
+           fi
+         fi
+         ;;
+     esac
+     test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem"
+     acl_cv_libdirstems="$acl_libdirstem,$acl_libdirstem2"
+    ])
+  # Decompose acl_cv_libdirstems into acl_libdirstem and acl_libdirstem2.
+  acl_libdirstem=`echo "$acl_cv_libdirstems" | sed -e 's/,.*//'`
+  acl_libdirstem2=`echo "$acl_cv_libdirstems" | sed -e '/,/s/.*,//'`
+])
diff --git a/m4/lock.m4 b/m4/lock.m4
new file mode 100644
index 0000000..93b76fa
--- /dev/null
+++ b/m4/lock.m4
@@ -0,0 +1,47 @@
+# lock.m4 serial 14
+dnl Copyright (C) 2005-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([gl_LOCK],
+[
+  AC_REQUIRE([gl_THREADLIB])
+  if test "$gl_threads_api" = posix; then
+    # OSF/1 4.0 and Mac OS X 10.1 lack the pthread_rwlock_t type and the
+    # pthread_rwlock_* functions.
+    has_rwlock=false
+    AC_CHECK_TYPE([pthread_rwlock_t],
+      [has_rwlock=true
+       AC_DEFINE([HAVE_PTHREAD_RWLOCK], [1],
+         [Define if the POSIX multithreading library has read/write locks.])],
+      [],
+      [#include <pthread.h>])
+    if $has_rwlock; then
+      gl_PTHREAD_RWLOCK_RDLOCK_PREFER_WRITER
+    fi
+    # glibc defines PTHREAD_MUTEX_RECURSIVE as enum, not as a macro.
+    AC_COMPILE_IFELSE([
+      AC_LANG_PROGRAM(
+        [[#include <pthread.h>]],
+        [[
+#if __FreeBSD__ == 4
+error "No, in FreeBSD 4.0 recursive mutexes actually don't work."
+#elif (defined __ENVIRONMENT_MAC_OS_X_VERSION_MIN_REQUIRED__ \
+       && __ENVIRONMENT_MAC_OS_X_VERSION_MIN_REQUIRED__ < 1070)
+error "No, in Mac OS X < 10.7 recursive mutexes actually don't work."
+#else
+int x = (int)PTHREAD_MUTEX_RECURSIVE;
+return !x;
+#endif
+        ]])],
+      [AC_DEFINE([HAVE_PTHREAD_MUTEX_RECURSIVE], [1],
+         [Define if the <pthread.h> defines PTHREAD_MUTEX_RECURSIVE.])])
+  fi
+  gl_PREREQ_LOCK
+])
+
+# Prerequisites of lib/glthread/lock.c.
+AC_DEFUN([gl_PREREQ_LOCK], [:])
diff --git a/m4/nls.m4 b/m4/nls.m4
new file mode 100644
index 0000000..b62f614
--- /dev/null
+++ b/m4/nls.m4
@@ -0,0 +1,32 @@
+# nls.m4 serial 5 (gettext-0.18)
+dnl Copyright (C) 1995-2003, 2005-2006, 2008-2014, 2016, 2019 Free Software
+dnl Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl   Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
+dnl   Bruno Haible <haible@clisp.cons.org>, 2000-2003.
+
+AC_PREREQ([2.50])
+
+AC_DEFUN([AM_NLS],
+[
+  AC_MSG_CHECKING([whether NLS is requested])
+  dnl Default is enabled NLS
+  AC_ARG_ENABLE([nls],
+    [  --disable-nls           do not use Native Language Support],
+    USE_NLS=$enableval, USE_NLS=yes)
+  AC_MSG_RESULT([$USE_NLS])
+  AC_SUBST([USE_NLS])
+])
diff --git a/m4/po.m4 b/m4/po.m4
new file mode 100644
index 0000000..ce72d01
--- /dev/null
+++ b/m4/po.m4
@@ -0,0 +1,441 @@
+# po.m4 serial 24a
+dnl Copyright (C) 1995-2014, 2016, 2018-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl   Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
+dnl   Bruno Haible <haible@clisp.cons.org>, 2000-2003.
+
+AC_PREREQ([2.60])
+
+dnl Checks for all prerequisites of the po subdirectory.
+AC_DEFUN([AM_PO_SUBDIRS],
+[
+  AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+  AC_REQUIRE([AC_PROG_INSTALL])dnl
+  AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+  AC_REQUIRE([AC_PROG_SED])dnl
+  AC_REQUIRE([AM_NLS])dnl
+
+  dnl Release version of the gettext macros. This is used to ensure that
+  dnl the gettext macros and po/Makefile.in.in are in sync.
+  AC_SUBST([GETTEXT_MACRO_VERSION], [0.19])
+
+  dnl Perform the following tests also if --disable-nls has been given,
+  dnl because they are needed for "make dist" to work.
+
+  dnl Search for GNU msgfmt in the PATH.
+  dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions.
+  dnl The second test excludes FreeBSD msgfmt.
+  AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+    [$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
+     (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
+    :)
+  AC_PATH_PROG([GMSGFMT], [gmsgfmt], [$MSGFMT])
+
+  dnl Test whether it is GNU msgfmt >= 0.15.
+changequote(,)dnl
+  case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+    '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;;
+    *) MSGFMT_015=$MSGFMT ;;
+  esac
+changequote([,])dnl
+  AC_SUBST([MSGFMT_015])
+changequote(,)dnl
+  case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+    '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
+    *) GMSGFMT_015=$GMSGFMT ;;
+  esac
+changequote([,])dnl
+  AC_SUBST([GMSGFMT_015])
+
+  dnl Search for GNU xgettext 0.12 or newer in the PATH.
+  dnl The first test excludes Solaris xgettext and early GNU xgettext versions.
+  dnl The second test excludes FreeBSD xgettext.
+  AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+    [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
+     (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
+    :)
+  dnl Remove leftover from FreeBSD xgettext call.
+  rm -f messages.po
+
+  dnl Test whether it is GNU xgettext >= 0.15.
+changequote(,)dnl
+  case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+    '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
+    *) XGETTEXT_015=$XGETTEXT ;;
+  esac
+changequote([,])dnl
+  AC_SUBST([XGETTEXT_015])
+
+  dnl Search for GNU msgmerge 0.11 or newer in the PATH.
+  AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge,
+    [$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :)
+
+  dnl Support for AM_XGETTEXT_OPTION.
+  test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS=
+  AC_SUBST([XGETTEXT_EXTRA_OPTIONS])
+
+  AC_CONFIG_COMMANDS([po-directories], [[
+    for ac_file in $CONFIG_FILES; do
+      # Support "outfile[:infile[:infile...]]"
+      case "$ac_file" in
+        *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+      esac
+      # PO directories have a Makefile.in generated from Makefile.in.in.
+      case "$ac_file" in */Makefile.in)
+        # Adjust a relative srcdir.
+        ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+        ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'`
+        ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+        # In autoconf-2.13 it is called $ac_given_srcdir.
+        # In autoconf-2.50 it is called $srcdir.
+        test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+        case "$ac_given_srcdir" in
+          .)  top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+          /*) top_srcdir="$ac_given_srcdir" ;;
+          *)  top_srcdir="$ac_dots$ac_given_srcdir" ;;
+        esac
+        # Treat a directory as a PO directory if and only if it has a
+        # POTFILES.in file. This allows packages to have multiple PO
+        # directories under different names or in different locations.
+        if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
+          rm -f "$ac_dir/POTFILES"
+          test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
+          gt_tab=`printf '\t'`
+          cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*,     $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
+          POMAKEFILEDEPS="POTFILES.in"
+          # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
+          # on $ac_dir but don't depend on user-specified configuration
+          # parameters.
+          if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+            # The LINGUAS file contains the set of available languages.
+            if test -n "$OBSOLETE_ALL_LINGUAS"; then
+              test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+            fi
+            ALL_LINGUAS=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+            POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+          else
+            # The set of available languages was given in configure.in.
+            ALL_LINGUAS=$OBSOLETE_ALL_LINGUAS
+          fi
+          # Compute POFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+          # Compute UPDATEPOFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+          # Compute DUMMYPOFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+          # Compute GMOFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+          case "$ac_given_srcdir" in
+            .) srcdirpre= ;;
+            *) srcdirpre='$(srcdir)/' ;;
+          esac
+          POFILES=
+          UPDATEPOFILES=
+          DUMMYPOFILES=
+          GMOFILES=
+          for lang in $ALL_LINGUAS; do
+            POFILES="$POFILES $srcdirpre$lang.po"
+            UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+            DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+            GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+          done
+          # CATALOGS depends on both $ac_dir and the user's LINGUAS
+          # environment variable.
+          INST_LINGUAS=
+          if test -n "$ALL_LINGUAS"; then
+            for presentlang in $ALL_LINGUAS; do
+              useit=no
+              if test "%UNSET%" != "$LINGUAS"; then
+                desiredlanguages="$LINGUAS"
+              else
+                desiredlanguages="$ALL_LINGUAS"
+              fi
+              for desiredlang in $desiredlanguages; do
+                # Use the presentlang catalog if desiredlang is
+                #   a. equal to presentlang, or
+                #   b. a variant of presentlang (because in this case,
+                #      presentlang can be used as a fallback for messages
+                #      which are not translated in the desiredlang catalog).
+                case "$desiredlang" in
+                  "$presentlang"*) useit=yes;;
+                esac
+              done
+              if test $useit = yes; then
+                INST_LINGUAS="$INST_LINGUAS $presentlang"
+              fi
+            done
+          fi
+          CATALOGS=
+          if test -n "$INST_LINGUAS"; then
+            for lang in $INST_LINGUAS; do
+              CATALOGS="$CATALOGS $lang.gmo"
+            done
+          fi
+          test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
+          sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
+          for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
+            if test -f "$f"; then
+              case "$f" in
+                *.orig | *.bak | *~) ;;
+                *) cat "$f" >> "$ac_dir/Makefile" ;;
+              esac
+            fi
+          done
+        fi
+        ;;
+      esac
+    done]],
+   [# Capture the value of obsolete ALL_LINGUAS because we need it to compute
+    # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS.
+    OBSOLETE_ALL_LINGUAS="$ALL_LINGUAS"
+    # Capture the value of LINGUAS because we need it to compute CATALOGS.
+    LINGUAS="${LINGUAS-%UNSET%}"
+   ])
+])
+
+dnl Postprocesses a Makefile in a directory containing PO files.
+AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE],
+[
+  # When this code is run, in config.status, two variables have already been
+  # set:
+  # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in,
+  # - LINGUAS is the value of the environment variable LINGUAS at configure
+  #   time.
+
+changequote(,)dnl
+  # Adjust a relative srcdir.
+  ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+  ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'`
+  ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+  # In autoconf-2.13 it is called $ac_given_srcdir.
+  # In autoconf-2.50 it is called $srcdir.
+  test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+  case "$ac_given_srcdir" in
+    .)  top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+    /*) top_srcdir="$ac_given_srcdir" ;;
+    *)  top_srcdir="$ac_dots$ac_given_srcdir" ;;
+  esac
+
+  # Find a way to echo strings without interpreting backslash.
+  if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then
+    gt_echo='echo'
+  else
+    if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then
+      gt_echo='printf %s\n'
+    else
+      echo_func () {
+        cat <<EOT
+$*
+EOT
+      }
+      gt_echo='echo_func'
+    fi
+  fi
+
+  # A sed script that extracts the value of VARIABLE from a Makefile.
+  tab=`printf '\t'`
+  sed_x_variable='
+# Test if the hold space is empty.
+x
+s/P/P/
+x
+ta
+# Yes it was empty. Look if we have the expected variable definition.
+/^['"${tab}"' ]*VARIABLE['"${tab}"' ]*=/{
+  # Seen the first line of the variable definition.
+  s/^['"${tab}"' ]*VARIABLE['"${tab}"' ]*=//
+  ba
+}
+bd
+:a
+# Here we are processing a line from the variable definition.
+# Remove comment, more precisely replace it with a space.
+s/#.*$/ /
+# See if the line ends in a backslash.
+tb
+:b
+s/\\$//
+# Print the line, without the trailing backslash.
+p
+tc
+# There was no trailing backslash. The end of the variable definition is
+# reached. Clear the hold space.
+s/^.*$//
+x
+bd
+:c
+# A trailing backslash means that the variable definition continues in the
+# next line. Put a nonempty string into the hold space to indicate this.
+s/^.*$/P/
+x
+:d
+'
+changequote([,])dnl
+
+  # Set POTFILES to the value of the Makefile variable POTFILES.
+  sed_x_POTFILES=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/POTFILES/g'`
+  POTFILES=`sed -n -e "$sed_x_POTFILES" < "$ac_file"`
+  # Compute POTFILES_DEPS as
+  #   $(foreach file, $(POTFILES), $(top_srcdir)/$(file))
+  POTFILES_DEPS=
+  for file in $POTFILES; do
+    POTFILES_DEPS="$POTFILES_DEPS "'$(top_srcdir)/'"$file"
+  done
+  POMAKEFILEDEPS=""
+
+  if test -n "$OBSOLETE_ALL_LINGUAS"; then
+    test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+  fi
+  if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+    # The LINGUAS file contains the set of available languages.
+    ALL_LINGUAS=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+    POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+  else
+    # Set ALL_LINGUAS to the value of the Makefile variable LINGUAS.
+    sed_x_LINGUAS=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/LINGUAS/g'`
+    ALL_LINGUAS=`sed -n -e "$sed_x_LINGUAS" < "$ac_file"`
+  fi
+  # Compute POFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+  # Compute UPDATEPOFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+  # Compute DUMMYPOFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+  # Compute GMOFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+  # Compute PROPERTIESFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).properties)
+  # Compute CLASSFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).class)
+  # Compute QMFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).qm)
+  # Compute MSGFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang)).msg)
+  # Compute RESOURCESDLLFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang))/$(DOMAIN).resources.dll)
+  case "$ac_given_srcdir" in
+    .) srcdirpre= ;;
+    *) srcdirpre='$(srcdir)/' ;;
+  esac
+  POFILES=
+  UPDATEPOFILES=
+  DUMMYPOFILES=
+  GMOFILES=
+  PROPERTIESFILES=
+  CLASSFILES=
+  QMFILES=
+  MSGFILES=
+  RESOURCESDLLFILES=
+  for lang in $ALL_LINGUAS; do
+    POFILES="$POFILES $srcdirpre$lang.po"
+    UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+    DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+    GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+    PROPERTIESFILES="$PROPERTIESFILES \$(top_srcdir)/\$(DOMAIN)_$lang.properties"
+    CLASSFILES="$CLASSFILES \$(top_srcdir)/\$(DOMAIN)_$lang.class"
+    QMFILES="$QMFILES $srcdirpre$lang.qm"
+    frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+    MSGFILES="$MSGFILES $srcdirpre$frobbedlang.msg"
+    frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+    RESOURCESDLLFILES="$RESOURCESDLLFILES $srcdirpre$frobbedlang/\$(DOMAIN).resources.dll"
+  done
+  # CATALOGS depends on both $ac_dir and the user's LINGUAS
+  # environment variable.
+  INST_LINGUAS=
+  if test -n "$ALL_LINGUAS"; then
+    for presentlang in $ALL_LINGUAS; do
+      useit=no
+      if test "%UNSET%" != "$LINGUAS"; then
+        desiredlanguages="$LINGUAS"
+      else
+        desiredlanguages="$ALL_LINGUAS"
+      fi
+      for desiredlang in $desiredlanguages; do
+        # Use the presentlang catalog if desiredlang is
+        #   a. equal to presentlang, or
+        #   b. a variant of presentlang (because in this case,
+        #      presentlang can be used as a fallback for messages
+        #      which are not translated in the desiredlang catalog).
+        case "$desiredlang" in
+          "$presentlang"*) useit=yes;;
+        esac
+      done
+      if test $useit = yes; then
+        INST_LINGUAS="$INST_LINGUAS $presentlang"
+      fi
+    done
+  fi
+  CATALOGS=
+  JAVACATALOGS=
+  QTCATALOGS=
+  TCLCATALOGS=
+  CSHARPCATALOGS=
+  if test -n "$INST_LINGUAS"; then
+    for lang in $INST_LINGUAS; do
+      CATALOGS="$CATALOGS $lang.gmo"
+      JAVACATALOGS="$JAVACATALOGS \$(DOMAIN)_$lang.properties"
+      QTCATALOGS="$QTCATALOGS $lang.qm"
+      frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+      TCLCATALOGS="$TCLCATALOGS $frobbedlang.msg"
+      frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+      CSHARPCATALOGS="$CSHARPCATALOGS $frobbedlang/\$(DOMAIN).resources.dll"
+    done
+  fi
+
+  sed -e "s|@POTFILES_DEPS@|$POTFILES_DEPS|g" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@PROPERTIESFILES@|$PROPERTIESFILES|g" -e "s|@CLASSFILES@|$CLASSFILES|g" -e "s|@QMFILES@|$QMFILES|g" -e "s|@MSGFILES@|$MSGFILES|g" -e "s|@RESOURCESDLLFILES@|$RESOURCESDLLFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@JAVACATALOGS@|$JAVACATALOGS|g" -e "s|@QTCATALOGS@|$QTCATALOGS|g" -e "s|@TCLCATALOGS@|$TCLCATALOGS|g" -e "s|@CSHARPCATALOGS@|$CSHARPCATALOGS|g" -e 's,^#distdir:,distdir:,' < "$ac_file" > "$ac_file.tmp"
+  tab=`printf '\t'`
+  if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then
+    # Add dependencies that cannot be formulated as a simple suffix rule.
+    for lang in $ALL_LINGUAS; do
+      frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+      cat >> "$ac_file.tmp" <<EOF
+$frobbedlang.msg: $lang.po
+${tab}@echo "\$(MSGFMT) -c --tcl -d \$(srcdir) -l $lang $srcdirpre$lang.po"; \
+${tab}\$(MSGFMT) -c --tcl -d "\$(srcdir)" -l $lang $srcdirpre$lang.po || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
+EOF
+    done
+  fi
+  if grep -l '@CSHARPCATALOGS@' "$ac_file" > /dev/null; then
+    # Add dependencies that cannot be formulated as a simple suffix rule.
+    for lang in $ALL_LINGUAS; do
+      frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+      cat >> "$ac_file.tmp" <<EOF
+$frobbedlang/\$(DOMAIN).resources.dll: $lang.po
+${tab}@echo "\$(MSGFMT) -c --csharp -d \$(srcdir) -l $lang $srcdirpre$lang.po -r \$(DOMAIN)"; \
+${tab}\$(MSGFMT) -c --csharp -d "\$(srcdir)" -l $lang $srcdirpre$lang.po -r "\$(DOMAIN)" || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
+EOF
+    done
+  fi
+  if test -n "$POMAKEFILEDEPS"; then
+    cat >> "$ac_file.tmp" <<EOF
+Makefile: $POMAKEFILEDEPS
+EOF
+  fi
+  mv "$ac_file.tmp" "$ac_file"
+])
+
+dnl Initializes the accumulator used by AM_XGETTEXT_OPTION.
+AC_DEFUN([AM_XGETTEXT_OPTION_INIT],
+[
+  XGETTEXT_EXTRA_OPTIONS=
+])
+
+dnl Registers an option to be passed to xgettext in the po subdirectory.
+AC_DEFUN([AM_XGETTEXT_OPTION],
+[
+  AC_REQUIRE([AM_XGETTEXT_OPTION_INIT])
+  XGETTEXT_EXTRA_OPTIONS="$XGETTEXT_EXTRA_OPTIONS $1"
+])
diff --git a/m4/printf-posix.m4 b/m4/printf-posix.m4
new file mode 100644
index 0000000..2707cf7
--- /dev/null
+++ b/m4/printf-posix.m4
@@ -0,0 +1,48 @@
+# printf-posix.m4 serial 6 (gettext-0.18.2)
+dnl Copyright (C) 2003, 2007, 2009-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+dnl Test whether the printf() function supports POSIX/XSI format strings with
+dnl positions.
+
+AC_DEFUN([gt_PRINTF_POSIX],
+[
+  AC_REQUIRE([AC_PROG_CC])
+  AC_CACHE_CHECK([whether printf() supports POSIX/XSI format strings],
+    gt_cv_func_printf_posix,
+    [
+      AC_RUN_IFELSE(
+        [AC_LANG_SOURCE([[
+#include <stdio.h>
+#include <string.h>
+/* The string "%2$d %1$d", with dollar characters protected from the shell's
+   dollar expansion (possibly an autoconf bug).  */
+static char format[] = { '%', '2', '$', 'd', ' ', '%', '1', '$', 'd', '\0' };
+static char buf[100];
+int main ()
+{
+  sprintf (buf, format, 33, 55);
+  return (strcmp (buf, "55 33") != 0);
+}]])],
+        [gt_cv_func_printf_posix=yes],
+        [gt_cv_func_printf_posix=no],
+        [
+          AC_EGREP_CPP([notposix], [
+#if defined __NetBSD__ || defined __BEOS__ || defined _MSC_VER || defined __MINGW32__ || defined __CYGWIN__
+  notposix
+#endif
+            ],
+            [gt_cv_func_printf_posix="guessing no"],
+            [gt_cv_func_printf_posix="guessing yes"])
+        ])
+    ])
+  case $gt_cv_func_printf_posix in
+    *yes)
+      AC_DEFINE([HAVE_POSIX_PRINTF], [1],
+        [Define if your printf() function supports format strings with positions.])
+      ;;
+  esac
+])
diff --git a/m4/progtest.m4 b/m4/progtest.m4
new file mode 100644
index 0000000..5f186b1
--- /dev/null
+++ b/m4/progtest.m4
@@ -0,0 +1,91 @@
+# progtest.m4 serial 7 (gettext-0.18.2)
+dnl Copyright (C) 1996-2003, 2005, 2008-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl   Ulrich Drepper <drepper@cygnus.com>, 1996.
+
+AC_PREREQ([2.50])
+
+# Search path for a program which passes the given test.
+
+dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
+dnl   TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
+AC_DEFUN([AM_PATH_PROG_WITH_TEST],
+[
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
+  # contains only /bin. Note that ksh looks also at the FPATH variable,
+  # so we have to set that as well for the test.
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+    && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+           || PATH_SEPARATOR=';'
+       }
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+  ac_executable_p="test -x"
+else
+  ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "$2", so it can be a program name with args.
+set dummy $2; ac_word=[$]2
+AC_MSG_CHECKING([for $ac_word])
+AC_CACHE_VAL([ac_cv_path_$1],
+[case "[$]$1" in
+  [[\\/]]* | ?:[[\\/]]*)
+    ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
+    ;;
+  *)
+    ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in ifelse([$5], , $PATH, [$5]); do
+      IFS="$ac_save_IFS"
+      test -z "$ac_dir" && ac_dir=.
+      for ac_exec_ext in '' $ac_executable_extensions; do
+        if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+          echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD
+          if [$3]; then
+            ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext"
+            break 2
+          fi
+        fi
+      done
+    done
+    IFS="$ac_save_IFS"
+dnl If no 4th arg is given, leave the cache variable unset,
+dnl so AC_PATH_PROGS will keep looking.
+ifelse([$4], , , [  test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
+])dnl
+    ;;
+esac])dnl
+$1="$ac_cv_path_$1"
+if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
+  AC_MSG_RESULT([$][$1])
+else
+  AC_MSG_RESULT([no])
+fi
+AC_SUBST([$1])dnl
+])
diff --git a/m4/pthread_rwlock_rdlock.m4 b/m4/pthread_rwlock_rdlock.m4
new file mode 100644
index 0000000..3c1d645
--- /dev/null
+++ b/m4/pthread_rwlock_rdlock.m4
@@ -0,0 +1,165 @@
+# pthread_rwlock_rdlock.m4 serial 2
+dnl Copyright (C) 2017-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+dnl Inspired by
+dnl https://github.com/linux-test-project/ltp/blob/master/testcases/open_posix_testsuite/conformance/interfaces/pthread_rwlock_rdlock/2-2.c
+dnl by Intel Corporation.
+
+dnl Test whether in a situation where
+dnl   - an rwlock is taken by a reader and has a writer waiting,
+dnl   - an additional reader requests the lock,
+dnl   - the waiting writer and the requesting reader threads have the same
+dnl     priority,
+dnl the requesting reader thread gets blocked, so that at some point the
+dnl waiting writer can acquire the lock.
+dnl Without such a guarantee, when there a N readers and each of the readers
+dnl spends more than 1/Nth of the time with the lock held, there is a high
+dnl probability that the waiting writer will not get the lock in a given finite
+dnl time, a phenomenon called "writer starvation".
+dnl Without such a guarantee, applications have a hard time avoiding writer
+dnl starvation.
+dnl
+dnl POSIX:2017 makes this requirement only for implementations that support TPS
+dnl (Thread Priority Scheduling) and only for the scheduling policies SCHED_FIFO
+dnl and SCHED_RR, see
+dnl http://pubs.opengroup.org/onlinepubs/9699919799/functions/pthread_rwlock_rdlock.html
+dnl but this test verifies the guarantee regardless of TPS and regardless of
+dnl scheduling policy.
+dnl Glibc currently does not provide this guarantee, see
+dnl https://sourceware.org/bugzilla/show_bug.cgi?id=13701
+AC_DEFUN([gl_PTHREAD_RWLOCK_RDLOCK_PREFER_WRITER],
+[
+  AC_REQUIRE([gl_THREADLIB_EARLY])
+  AC_CACHE_CHECK([whether pthread_rwlock_rdlock prefers a writer to a reader],
+    [gl_cv_pthread_rwlock_rdlock_prefer_writer],
+    [save_LIBS="$LIBS"
+     LIBS="$LIBS $LIBMULTITHREAD"
+     AC_RUN_IFELSE(
+       [AC_LANG_SOURCE([[
+#include <errno.h>
+#include <pthread.h>
+#include <stdlib.h>
+#include <unistd.h>
+
+#define SUCCEED() exit (0)
+#define FAILURE() exit (1)
+#define UNEXPECTED(n) (exit (10 + (n)))
+
+/* The main thread creates the waiting writer and the requesting reader threads
+   in the default way; this guarantees that they have the same priority.
+   We can reuse the main thread as first reader thread.  */
+
+static pthread_rwlock_t lock;
+static pthread_t reader1;
+static pthread_t writer;
+static pthread_t reader2;
+static pthread_t timer;
+/* Used to pass control from writer to reader2 and from reader2 to timer,
+   as in a relay race.
+   Passing control from one running thread to another running thread
+   is most likely faster than to create the second thread.  */
+static pthread_mutex_t baton;
+
+static void *
+timer_func (void *ignored)
+{
+  /* Step 13 (can be before or after step 12):
+     The timer thread takes the baton, then waits a moment to make sure
+     it can tell whether the second reader thread is blocked at step 12.  */
+  if (pthread_mutex_lock (&baton))
+    UNEXPECTED (13);
+  usleep (100000);
+  /* By the time we get here, it's clear that the second reader thread is
+     blocked at step 12.  This is the desired behaviour.  */
+  SUCCEED ();
+}
+
+static void *
+reader2_func (void *ignored)
+{
+  int err;
+
+  /* Step 8 (can be before or after step 7):
+     The second reader thread takes the baton, then waits a moment to make sure
+     the writer thread has reached step 7.  */
+  if (pthread_mutex_lock (&baton))
+    UNEXPECTED (8);
+  usleep (100000);
+  /* Step 9: The second reader thread requests the lock.  */
+  err = pthread_rwlock_tryrdlock (&lock);
+  if (err == 0)
+    FAILURE ();
+  else if (err != EBUSY)
+    UNEXPECTED (9);
+  /* Step 10: Launch a timer, to test whether the next call blocks.  */
+  if (pthread_create (&timer, NULL, timer_func, NULL))
+    UNEXPECTED (10);
+  /* Step 11: Release the baton.  */
+  if (pthread_mutex_unlock (&baton))
+    UNEXPECTED (11);
+  /* Step 12: The second reader thread requests the lock.  */
+  err = pthread_rwlock_rdlock (&lock);
+  if (err == 0)
+    FAILURE ();
+  else
+    UNEXPECTED (12);
+}
+
+static void *
+writer_func (void *ignored)
+{
+  /* Step 4: Take the baton, so that the second reader thread does not go ahead
+     too early.  */
+  if (pthread_mutex_lock (&baton))
+    UNEXPECTED (4);
+  /* Step 5: Create the second reader thread.  */
+  if (pthread_create (&reader2, NULL, reader2_func, NULL))
+    UNEXPECTED (5);
+  /* Step 6: Release the baton.  */
+  if (pthread_mutex_unlock (&baton))
+    UNEXPECTED (6);
+  /* Step 7: The writer thread requests the lock.  */
+  if (pthread_rwlock_wrlock (&lock))
+    UNEXPECTED (7);
+  return NULL;
+}
+
+int
+main ()
+{
+  reader1 = pthread_self ();
+
+  /* Step 1: The main thread initializes the lock and the baton.  */
+  if (pthread_rwlock_init (&lock, NULL))
+    UNEXPECTED (1);
+  if (pthread_mutex_init (&baton, NULL))
+    UNEXPECTED (1);
+  /* Step 2: The main thread acquires the lock as a reader.  */
+  if (pthread_rwlock_rdlock (&lock))
+    UNEXPECTED (2);
+  /* Step 3: Create the writer thread.  */
+  if (pthread_create (&writer, NULL, writer_func, NULL))
+    UNEXPECTED (3);
+  /* Job done.  Go to sleep.  */
+  for (;;)
+    {
+      sleep (1);
+    }
+}
+]])],
+       [gl_cv_pthread_rwlock_rdlock_prefer_writer=yes],
+       [gl_cv_pthread_rwlock_rdlock_prefer_writer=no],
+       [gl_cv_pthread_rwlock_rdlock_prefer_writer="guessing yes"])
+     LIBS="$save_LIBS"
+    ])
+  case "$gl_cv_pthread_rwlock_rdlock_prefer_writer" in
+    *yes)
+      AC_DEFINE([HAVE_PTHREAD_RWLOCK_RDLOCK_PREFER_WRITER], [1],
+        [Define if the 'pthread_rwlock_rdlock' function prefers a writer to a reader.])
+      ;;
+  esac
+])
diff --git a/m4/size_max.m4 b/m4/size_max.m4
new file mode 100644
index 0000000..ab79052
--- /dev/null
+++ b/m4/size_max.m4
@@ -0,0 +1,75 @@
+# size_max.m4 serial 11
+dnl Copyright (C) 2003, 2005-2006, 2008-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_PREREQ([2.61])
+
+AC_DEFUN([gl_SIZE_MAX],
+[
+  AC_CHECK_HEADERS([stdint.h])
+  dnl First test whether the system already has SIZE_MAX.
+  AC_CACHE_CHECK([for SIZE_MAX], [gl_cv_size_max], [
+    gl_cv_size_max=
+    AC_EGREP_CPP([Found it], [
+#include <limits.h>
+#if HAVE_STDINT_H
+#include <stdint.h>
+#endif
+#ifdef SIZE_MAX
+Found it
+#endif
+], [gl_cv_size_max=yes])
+    if test -z "$gl_cv_size_max"; then
+      dnl Define it ourselves. Here we assume that the type 'size_t' is not wider
+      dnl than the type 'unsigned long'. Try hard to find a definition that can
+      dnl be used in a preprocessor #if, i.e. doesn't contain a cast.
+      AC_COMPUTE_INT([size_t_bits_minus_1], [sizeof (size_t) * CHAR_BIT - 1],
+        [#include <stddef.h>
+#include <limits.h>], [size_t_bits_minus_1=])
+      AC_COMPUTE_INT([fits_in_uint], [sizeof (size_t) <= sizeof (unsigned int)],
+        [#include <stddef.h>], [fits_in_uint=])
+      if test -n "$size_t_bits_minus_1" && test -n "$fits_in_uint"; then
+        if test $fits_in_uint = 1; then
+          dnl Even though SIZE_MAX fits in an unsigned int, it must be of type
+          dnl 'unsigned long' if the type 'size_t' is the same as 'unsigned long'.
+          AC_COMPILE_IFELSE(
+            [AC_LANG_PROGRAM(
+               [[#include <stddef.h>
+                 extern size_t foo;
+                 extern unsigned long foo;
+               ]],
+               [[]])],
+            [fits_in_uint=0])
+        fi
+        dnl We cannot use 'expr' to simplify this expression, because 'expr'
+        dnl works only with 'long' integers in the host environment, while we
+        dnl might be cross-compiling from a 32-bit platform to a 64-bit platform.
+        if test $fits_in_uint = 1; then
+          gl_cv_size_max="(((1U << $size_t_bits_minus_1) - 1) * 2 + 1)"
+        else
+          gl_cv_size_max="(((1UL << $size_t_bits_minus_1) - 1) * 2 + 1)"
+        fi
+      else
+        dnl Shouldn't happen, but who knows...
+        gl_cv_size_max='((size_t)~(size_t)0)'
+      fi
+    fi
+  ])
+  if test "$gl_cv_size_max" != yes; then
+    AC_DEFINE_UNQUOTED([SIZE_MAX], [$gl_cv_size_max],
+      [Define as the maximum value of type 'size_t', if the system doesn't define it.])
+  fi
+  dnl Don't redefine SIZE_MAX in config.h if config.h is re-included after
+  dnl <stdint.h>. Remember that the #undef in AH_VERBATIM gets replaced with
+  dnl #define by AC_DEFINE_UNQUOTED.
+  AH_VERBATIM([SIZE_MAX],
+[/* Define as the maximum value of type 'size_t', if the system doesn't define
+   it. */
+#ifndef SIZE_MAX
+# undef SIZE_MAX
+#endif])
+])
diff --git a/m4/stat-time.m4 b/m4/stat-time.m4
new file mode 100644
index 0000000..f5d67a1
--- /dev/null
+++ b/m4/stat-time.m4
@@ -0,0 +1,61 @@
+# Checks for stat-related time functions.
+
+# Copyright (C) 1998-1999, 2001, 2003, 2005-2007, 2009-2012 Free Software
+# Foundation, Inc.
+
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+dnl From Paul Eggert.
+dnl Modified by Chet Ramey for bash.
+
+# st_atim.tv_nsec - Linux, Solaris, Cygwin
+# st_atimespec.tv_nsec - FreeBSD, NetBSD, if ! defined _POSIX_SOURCE
+# st_atimensec - FreeBSD, NetBSD, if defined _POSIX_SOURCE
+# st_atim.st__tim.tv_nsec - UnixWare (at least 2.1.2 through 7.1)
+
+# st_birthtimespec - FreeBSD, NetBSD (hidden on OpenBSD 3.9, anyway)
+# st_birthtim - Cygwin 1.7.0+
+
+AC_DEFUN([BASH_STAT_TIME],
+[
+  AC_REQUIRE([AC_C_INLINE])
+  AC_CHECK_HEADERS_ONCE([sys/time.h])
+
+  AC_CHECK_MEMBERS([struct stat.st_atim.tv_nsec],
+    [AC_CACHE_CHECK([whether struct stat.st_atim is of type struct timespec],
+       [ac_cv_typeof_struct_stat_st_atim_is_struct_timespec],
+       [AC_COMPILE_IFELSE([AC_LANG_PROGRAM(
+          [[
+            #include <sys/types.h>
+            #include <sys/stat.h>
+            #if HAVE_SYS_TIME_H
+            # include <sys/time.h>
+            #endif
+            #include <time.h>
+            struct timespec ts;
+            struct stat st;
+          ]],
+          [[
+            st.st_atim = ts;
+          ]])],
+          [ac_cv_typeof_struct_stat_st_atim_is_struct_timespec=yes],
+          [ac_cv_typeof_struct_stat_st_atim_is_struct_timespec=no])])
+     if test $ac_cv_typeof_struct_stat_st_atim_is_struct_timespec = yes; then
+       AC_DEFINE([TYPEOF_STRUCT_STAT_ST_ATIM_IS_STRUCT_TIMESPEC], [1],
+         [Define to 1 if the type of the st_atim member of a struct stat is
+          struct timespec.])
+     fi],
+    [AC_CHECK_MEMBERS([struct stat.st_atimespec.tv_nsec], [],
+       [AC_CHECK_MEMBERS([struct stat.st_atimensec], [],
+          [AC_CHECK_MEMBERS([struct stat.st_atim.st__tim.tv_nsec], [], [],
+             [#include <sys/types.h>
+              #include <sys/stat.h>])],
+          [#include <sys/types.h>
+           #include <sys/stat.h>])],
+       [#include <sys/types.h>
+        #include <sys/stat.h>])],
+    [#include <sys/types.h>
+     #include <sys/stat.h>])
+])
diff --git a/m4/stdint_h.m4 b/m4/stdint_h.m4
new file mode 100644
index 0000000..6d5f1af
--- /dev/null
+++ b/m4/stdint_h.m4
@@ -0,0 +1,27 @@
+# stdint_h.m4 serial 9
+dnl Copyright (C) 1997-2004, 2006, 2008-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Paul Eggert.
+
+# Define HAVE_STDINT_H_WITH_UINTMAX if <stdint.h> exists,
+# doesn't clash with <sys/types.h>, and declares uintmax_t.
+
+AC_DEFUN([gl_AC_HEADER_STDINT_H],
+[
+  AC_CACHE_CHECK([for stdint.h], [gl_cv_header_stdint_h],
+    [AC_COMPILE_IFELSE(
+       [AC_LANG_PROGRAM(
+          [[#include <sys/types.h>
+            #include <stdint.h>]],
+          [[uintmax_t i = (uintmax_t) -1; return !i;]])],
+       [gl_cv_header_stdint_h=yes],
+       [gl_cv_header_stdint_h=no])])
+  if test $gl_cv_header_stdint_h = yes; then
+    AC_DEFINE_UNQUOTED([HAVE_STDINT_H_WITH_UINTMAX], [1],
+      [Define if <stdint.h> exists, doesn't clash with <sys/types.h>,
+       and declares uintmax_t. ])
+  fi
+])
diff --git a/m4/threadlib.m4 b/m4/threadlib.m4
new file mode 100644
index 0000000..bfc3bac
--- /dev/null
+++ b/m4/threadlib.m4
@@ -0,0 +1,393 @@
+# threadlib.m4 serial 16
+dnl Copyright (C) 2005-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_PREREQ([2.60])
+
+dnl gl_THREADLIB
+dnl ------------
+dnl Tests for a multithreading library to be used.
+dnl If the configure.ac contains a definition of the gl_THREADLIB_DEFAULT_NO
+dnl (it must be placed before the invocation of gl_THREADLIB_EARLY!), then the
+dnl default is 'no', otherwise it is system dependent. In both cases, the user
+dnl can change the choice through the options --enable-threads=choice or
+dnl --disable-threads.
+dnl Defines at most one of the macros USE_POSIX_THREADS, USE_SOLARIS_THREADS,
+dnl USE_PTH_THREADS, USE_WINDOWS_THREADS
+dnl Sets the variables LIBTHREAD and LTLIBTHREAD to the linker options for use
+dnl in a Makefile (LIBTHREAD for use without libtool, LTLIBTHREAD for use with
+dnl libtool).
+dnl Sets the variables LIBMULTITHREAD and LTLIBMULTITHREAD similarly, for
+dnl programs that really need multithread functionality. The difference
+dnl between LIBTHREAD and LIBMULTITHREAD is that on platforms supporting weak
+dnl symbols, typically LIBTHREAD is empty whereas LIBMULTITHREAD is not.
+dnl Adds to CPPFLAGS the flag -D_REENTRANT or -D_THREAD_SAFE if needed for
+dnl multithread-safe programs.
+
+AC_DEFUN([gl_THREADLIB_EARLY],
+[
+  AC_REQUIRE([gl_THREADLIB_EARLY_BODY])
+])
+
+dnl The guts of gl_THREADLIB_EARLY. Needs to be expanded only once.
+
+AC_DEFUN([gl_THREADLIB_EARLY_BODY],
+[
+  dnl Ordering constraints: This macro modifies CPPFLAGS in a way that
+  dnl influences the result of the autoconf tests that test for *_unlocked
+  dnl declarations, on AIX 5 at least. Therefore it must come early.
+  AC_BEFORE([$0], [gl_FUNC_GLIBC_UNLOCKED_IO])dnl
+  AC_BEFORE([$0], [gl_ARGP])dnl
+
+  AC_REQUIRE([AC_CANONICAL_HOST])
+  dnl _GNU_SOURCE is needed for pthread_rwlock_t on glibc systems.
+  AC_REQUIRE([AC_USE_SYSTEM_EXTENSIONS])
+  dnl Check for multithreading.
+  m4_ifdef([gl_THREADLIB_DEFAULT_NO],
+    [m4_divert_text([DEFAULTS], [gl_use_threads_default=no])],
+    [m4_divert_text([DEFAULTS], [gl_use_threads_default=])])
+  AC_ARG_ENABLE([threads],
+AC_HELP_STRING([--enable-threads={posix|solaris|pth|windows}], [specify multithreading API])m4_ifdef([gl_THREADLIB_DEFAULT_NO], [], [
+AC_HELP_STRING([--disable-threads], [build without multithread safety])]),
+    [gl_use_threads=$enableval],
+    [if test -n "$gl_use_threads_default"; then
+       gl_use_threads="$gl_use_threads_default"
+     else
+changequote(,)dnl
+       case "$host_os" in
+         dnl Disable multithreading by default on OSF/1, because it interferes
+         dnl with fork()/exec(): When msgexec is linked with -lpthread, its
+         dnl child process gets an endless segmentation fault inside execvp().
+         dnl Disable multithreading by default on Cygwin 1.5.x, because it has
+         dnl bugs that lead to endless loops or crashes. See
+         dnl <https://cygwin.com/ml/cygwin/2009-08/msg00283.html>.
+         osf*) gl_use_threads=no ;;
+         cygwin*)
+               case `uname -r` in
+                 1.[0-5].*) gl_use_threads=no ;;
+                 *)         gl_use_threads=yes ;;
+               esac
+               ;;
+         *)    gl_use_threads=yes ;;
+       esac
+changequote([,])dnl
+     fi
+    ])
+  if test "$gl_use_threads" = yes || test "$gl_use_threads" = posix; then
+    # For using <pthread.h>:
+    case "$host_os" in
+      osf*)
+        # On OSF/1, the compiler needs the flag -D_REENTRANT so that it
+        # groks <pthread.h>. cc also understands the flag -pthread, but
+        # we don't use it because 1. gcc-2.95 doesn't understand -pthread,
+        # 2. putting a flag into CPPFLAGS that has an effect on the linker
+        # causes the AC_LINK_IFELSE test below to succeed unexpectedly,
+        # leading to wrong values of LIBTHREAD and LTLIBTHREAD.
+        CPPFLAGS="$CPPFLAGS -D_REENTRANT"
+        ;;
+    esac
+    # Some systems optimize for single-threaded programs by default, and
+    # need special flags to disable these optimizations. For example, the
+    # definition of 'errno' in <errno.h>.
+    case "$host_os" in
+      aix* | freebsd*) CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" ;;
+      solaris*) CPPFLAGS="$CPPFLAGS -D_REENTRANT" ;;
+    esac
+  fi
+])
+
+dnl The guts of gl_THREADLIB. Needs to be expanded only once.
+
+AC_DEFUN([gl_THREADLIB_BODY],
+[
+  AC_REQUIRE([gl_THREADLIB_EARLY_BODY])
+  gl_threads_api=none
+  LIBTHREAD=
+  LTLIBTHREAD=
+  LIBMULTITHREAD=
+  LTLIBMULTITHREAD=
+  if test "$gl_use_threads" != no; then
+    dnl Check whether the compiler and linker support weak declarations.
+    AC_CACHE_CHECK([whether imported symbols can be declared weak],
+      [gl_cv_have_weak],
+      [gl_cv_have_weak=no
+       dnl First, test whether the compiler accepts it syntactically.
+       AC_LINK_IFELSE(
+         [AC_LANG_PROGRAM(
+            [[extern void xyzzy ();
+#pragma weak xyzzy]],
+            [[xyzzy();]])],
+         [gl_cv_have_weak=maybe])
+       if test $gl_cv_have_weak = maybe; then
+         dnl Second, test whether it actually works. On Cygwin 1.7.2, with
+         dnl gcc 4.3, symbols declared weak always evaluate to the address 0.
+         AC_RUN_IFELSE(
+           [AC_LANG_SOURCE([[
+#include <stdio.h>
+#pragma weak fputs
+int main ()
+{
+  return (fputs == NULL);
+}]])],
+           [gl_cv_have_weak=yes],
+           [gl_cv_have_weak=no],
+           [dnl When cross-compiling, assume that only ELF platforms support
+            dnl weak symbols.
+            AC_EGREP_CPP([Extensible Linking Format],
+              [#ifdef __ELF__
+               Extensible Linking Format
+               #endif
+              ],
+              [gl_cv_have_weak="guessing yes"],
+              [gl_cv_have_weak="guessing no"])
+           ])
+       fi
+       dnl But when linking statically, weak symbols don't work.
+       case " $LDFLAGS " in
+         *" -static "*) gl_cv_have_weak=no ;;
+       esac
+      ])
+    if test "$gl_use_threads" = yes || test "$gl_use_threads" = posix; then
+      # On OSF/1, the compiler needs the flag -pthread or -D_REENTRANT so that
+      # it groks <pthread.h>. It's added above, in gl_THREADLIB_EARLY_BODY.
+      AC_CHECK_HEADER([pthread.h],
+        [gl_have_pthread_h=yes], [gl_have_pthread_h=no])
+      if test "$gl_have_pthread_h" = yes; then
+        # Other possible tests:
+        #   -lpthreads (FSU threads, PCthreads)
+        #   -lgthreads
+        gl_have_pthread=
+        # Test whether both pthread_mutex_lock and pthread_mutexattr_init exist
+        # in libc. IRIX 6.5 has the first one in both libc and libpthread, but
+        # the second one only in libpthread, and lock.c needs it.
+        #
+        # If -pthread works, prefer it to -lpthread, since Ubuntu 14.04
+        # needs -pthread for some reason.  See:
+        # https://lists.gnu.org/r/bug-gnulib/2014-09/msg00023.html
+        save_LIBS=$LIBS
+        for gl_pthread in '' '-pthread'; do
+          LIBS="$LIBS $gl_pthread"
+          AC_LINK_IFELSE(
+            [AC_LANG_PROGRAM(
+               [[#include <pthread.h>
+                 pthread_mutex_t m;
+                 pthread_mutexattr_t ma;
+               ]],
+               [[pthread_mutex_lock (&m);
+                 pthread_mutexattr_init (&ma);]])],
+            [gl_have_pthread=yes
+             LIBTHREAD=$gl_pthread LTLIBTHREAD=$gl_pthread
+             LIBMULTITHREAD=$gl_pthread LTLIBMULTITHREAD=$gl_pthread])
+          LIBS=$save_LIBS
+          test -n "$gl_have_pthread" && break
+        done
+
+        # Test for libpthread by looking for pthread_kill. (Not pthread_self,
+        # since it is defined as a macro on OSF/1.)
+        if test -n "$gl_have_pthread" && test -z "$LIBTHREAD"; then
+          # The program links fine without libpthread. But it may actually
+          # need to link with libpthread in order to create multiple threads.
+          AC_CHECK_LIB([pthread], [pthread_kill],
+            [LIBMULTITHREAD=-lpthread LTLIBMULTITHREAD=-lpthread
+             # On Solaris and HP-UX, most pthread functions exist also in libc.
+             # Therefore pthread_in_use() needs to actually try to create a
+             # thread: pthread_create from libc will fail, whereas
+             # pthread_create will actually create a thread.
+             # On Solaris 10 or newer, this test is no longer needed, because
+             # libc contains the fully functional pthread functions.
+             case "$host_os" in
+               solaris | solaris2.[1-9] | solaris2.[1-9].* | hpux*)
+                 AC_DEFINE([PTHREAD_IN_USE_DETECTION_HARD], [1],
+                   [Define if the pthread_in_use() detection is hard.])
+             esac
+            ])
+        elif test -z "$gl_have_pthread"; then
+          # Some library is needed. Try libpthread and libc_r.
+          AC_CHECK_LIB([pthread], [pthread_kill],
+            [gl_have_pthread=yes
+             LIBTHREAD=-lpthread LTLIBTHREAD=-lpthread
+             LIBMULTITHREAD=-lpthread LTLIBMULTITHREAD=-lpthread])
+          if test -z "$gl_have_pthread"; then
+            # For FreeBSD 4.
+            AC_CHECK_LIB([c_r], [pthread_kill],
+              [gl_have_pthread=yes
+               LIBTHREAD=-lc_r LTLIBTHREAD=-lc_r
+               LIBMULTITHREAD=-lc_r LTLIBMULTITHREAD=-lc_r])
+          fi
+        fi
+        if test -n "$gl_have_pthread"; then
+          gl_threads_api=posix
+          AC_DEFINE([USE_POSIX_THREADS], [1],
+            [Define if the POSIX multithreading library can be used.])
+          if test -n "$LIBMULTITHREAD" || test -n "$LTLIBMULTITHREAD"; then
+            if case "$gl_cv_have_weak" in *yes) true;; *) false;; esac; then
+              AC_DEFINE([USE_POSIX_THREADS_WEAK], [1],
+                [Define if references to the POSIX multithreading library should be made weak.])
+              LIBTHREAD=
+              LTLIBTHREAD=
+            fi
+          fi
+        fi
+      fi
+    fi
+    if test -z "$gl_have_pthread"; then
+      if test "$gl_use_threads" = yes || test "$gl_use_threads" = solaris; then
+        gl_have_solaristhread=
+        gl_save_LIBS="$LIBS"
+        LIBS="$LIBS -lthread"
+        AC_LINK_IFELSE(
+          [AC_LANG_PROGRAM(
+             [[
+#include <thread.h>
+#include <synch.h>
+             ]],
+             [[thr_self();]])],
+          [gl_have_solaristhread=yes])
+        LIBS="$gl_save_LIBS"
+        if test -n "$gl_have_solaristhread"; then
+          gl_threads_api=solaris
+          LIBTHREAD=-lthread
+          LTLIBTHREAD=-lthread
+          LIBMULTITHREAD="$LIBTHREAD"
+          LTLIBMULTITHREAD="$LTLIBTHREAD"
+          AC_DEFINE([USE_SOLARIS_THREADS], [1],
+            [Define if the old Solaris multithreading library can be used.])
+          if case "$gl_cv_have_weak" in *yes) true;; *) false;; esac; then
+            AC_DEFINE([USE_SOLARIS_THREADS_WEAK], [1],
+              [Define if references to the old Solaris multithreading library should be made weak.])
+            LIBTHREAD=
+            LTLIBTHREAD=
+          fi
+        fi
+      fi
+    fi
+    if test "$gl_use_threads" = pth; then
+      gl_save_CPPFLAGS="$CPPFLAGS"
+      AC_LIB_LINKFLAGS([pth])
+      gl_have_pth=
+      gl_save_LIBS="$LIBS"
+      LIBS="$LIBS $LIBPTH"
+      AC_LINK_IFELSE(
+        [AC_LANG_PROGRAM([[#include <pth.h>]], [[pth_self();]])],
+        [gl_have_pth=yes])
+      LIBS="$gl_save_LIBS"
+      if test -n "$gl_have_pth"; then
+        gl_threads_api=pth
+        LIBTHREAD="$LIBPTH"
+        LTLIBTHREAD="$LTLIBPTH"
+        LIBMULTITHREAD="$LIBTHREAD"
+        LTLIBMULTITHREAD="$LTLIBTHREAD"
+        AC_DEFINE([USE_PTH_THREADS], [1],
+          [Define if the GNU Pth multithreading library can be used.])
+        if test -n "$LIBMULTITHREAD" || test -n "$LTLIBMULTITHREAD"; then
+          if case "$gl_cv_have_weak" in *yes) true;; *) false;; esac; then
+            AC_DEFINE([USE_PTH_THREADS_WEAK], [1],
+              [Define if references to the GNU Pth multithreading library should be made weak.])
+            LIBTHREAD=
+            LTLIBTHREAD=
+          fi
+        fi
+      else
+        CPPFLAGS="$gl_save_CPPFLAGS"
+      fi
+    fi
+    if test -z "$gl_have_pthread"; then
+      case "$gl_use_threads" in
+        yes | windows | win32) # The 'win32' is for backward compatibility.
+          if { case "$host_os" in
+                 mingw*) true;;
+                 *) false;;
+               esac
+             }; then
+            gl_threads_api=windows
+            AC_DEFINE([USE_WINDOWS_THREADS], [1],
+              [Define if the native Windows multithreading API can be used.])
+          fi
+          ;;
+      esac
+    fi
+  fi
+  AC_MSG_CHECKING([for multithread API to use])
+  AC_MSG_RESULT([$gl_threads_api])
+  AC_SUBST([LIBTHREAD])
+  AC_SUBST([LTLIBTHREAD])
+  AC_SUBST([LIBMULTITHREAD])
+  AC_SUBST([LTLIBMULTITHREAD])
+])
+
+AC_DEFUN([gl_THREADLIB],
+[
+  AC_REQUIRE([gl_THREADLIB_EARLY])
+  AC_REQUIRE([gl_THREADLIB_BODY])
+])
+
+
+dnl gl_DISABLE_THREADS
+dnl ------------------
+dnl Sets the gl_THREADLIB default so that threads are not used by default.
+dnl The user can still override it at installation time, by using the
+dnl configure option '--enable-threads'.
+
+AC_DEFUN([gl_DISABLE_THREADS], [
+  m4_divert_text([INIT_PREPARE], [gl_use_threads_default=no])
+])
+
+
+dnl Survey of platforms:
+dnl
+dnl Platform           Available  Compiler    Supports   test-lock
+dnl                    flavours   option      weak       result
+dnl ---------------    ---------  ---------   --------   ---------
+dnl Linux 2.4/glibc    posix      -lpthread       Y      OK
+dnl
+dnl GNU Hurd/glibc     posix
+dnl
+dnl Ubuntu 14.04       posix      -pthread        Y      OK
+dnl
+dnl FreeBSD 5.3        posix      -lc_r           Y
+dnl                    posix      -lkse ?         Y
+dnl                    posix      -lpthread ?     Y
+dnl                    posix      -lthr           Y
+dnl
+dnl FreeBSD 5.2        posix      -lc_r           Y
+dnl                    posix      -lkse           Y
+dnl                    posix      -lthr           Y
+dnl
+dnl FreeBSD 4.0,4.10   posix      -lc_r           Y      OK
+dnl
+dnl NetBSD 1.6         --
+dnl
+dnl OpenBSD 3.4        posix      -lpthread       Y      OK
+dnl
+dnl Mac OS X 10.[123]  posix      -lpthread       Y      OK
+dnl
+dnl Solaris 7,8,9      posix      -lpthread       Y      Sol 7,8: 0.0; Sol 9: OK
+dnl                    solaris    -lthread        Y      Sol 7,8: 0.0; Sol 9: OK
+dnl
+dnl HP-UX 11           posix      -lpthread       N (cc) OK
+dnl                                               Y (gcc)
+dnl
+dnl IRIX 6.5           posix      -lpthread       Y      0.5
+dnl
+dnl AIX 4.3,5.1        posix      -lpthread       N      AIX 4: 0.5; AIX 5: OK
+dnl
+dnl OSF/1 4.0,5.1      posix      -pthread (cc)   N      OK
+dnl                               -lpthread (gcc) Y
+dnl
+dnl Cygwin             posix      -lpthread       Y      OK
+dnl
+dnl Any of the above   pth        -lpth                  0.0
+dnl
+dnl Mingw              windows                    N      OK
+dnl
+dnl BeOS 5             --
+dnl
+dnl The test-lock result shows what happens if in test-lock.c EXPLICIT_YIELD is
+dnl turned off:
+dnl   OK if all three tests terminate OK,
+dnl   0.5 if the first test terminates OK but the second one loops endlessly,
+dnl   0.0 if the first test already loops endlessly.
diff --git a/m4/timespec.m4 b/m4/timespec.m4
new file mode 100644
index 0000000..3643b47
--- /dev/null
+++ b/m4/timespec.m4
@@ -0,0 +1,71 @@
+# Configure checks for struct timespec
+
+# Copyright (C) 2000-2001, 2003-2007, 2009-2011, 2012 Free Software Foundation, Inc.
+
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# Original written by Paul Eggert and Jim Meyering.
+# Modified by Chet Ramey for bash
+
+dnl Define HAVE_STRUCT_TIMESPEC if `struct timespec' is declared
+dnl in time.h, sys/time.h, or pthread.h.
+
+AC_DEFUN([BASH_CHECK_TYPE_STRUCT_TIMESPEC],
+[
+  AC_CHECK_HEADERS_ONCE([sys/time.h])
+  AC_CACHE_CHECK([for struct timespec in <time.h>],
+    [bash_cv_sys_struct_timespec_in_time_h],
+    [AC_COMPILE_IFELSE(
+       [AC_LANG_PROGRAM(
+          [[#include <time.h>
+          ]],
+          [[static struct timespec x; x.tv_sec = x.tv_nsec;]])],
+       [bash_cv_sys_struct_timespec_in_time_h=yes],
+       [bash_cv_sys_struct_timespec_in_time_h=no])])
+
+  HAVE_STRUCT_TIMESPEC=0
+  TIME_H_DEFINES_STRUCT_TIMESPEC=0
+  SYS_TIME_H_DEFINES_STRUCT_TIMESPEC=0
+  PTHREAD_H_DEFINES_STRUCT_TIMESPEC=0
+  if test $bash_cv_sys_struct_timespec_in_time_h = yes; then
+    AC_DEFINE([HAVE_STRUCT_TIMESPEC])
+    AC_DEFINE([TIME_H_DEFINES_STRUCT_TIMESPEC])
+    TIME_H_DEFINES_STRUCT_TIMESPEC=1
+  else
+    AC_CACHE_CHECK([for struct timespec in <sys/time.h>],
+      [bash_cv_sys_struct_timespec_in_sys_time_h],
+      [AC_COMPILE_IFELSE(
+         [AC_LANG_PROGRAM(
+            [[#include <sys/time.h>
+            ]],
+            [[static struct timespec x; x.tv_sec = x.tv_nsec;]])],
+         [bash_cv_sys_struct_timespec_in_sys_time_h=yes],
+         [bash_cv_sys_struct_timespec_in_sys_time_h=no])])
+    if test $bash_cv_sys_struct_timespec_in_sys_time_h = yes; then
+      SYS_TIME_H_DEFINES_STRUCT_TIMESPEC=1
+      AC_DEFINE([HAVE_STRUCT_TIMESPEC])
+      AC_DEFINE([SYS_TIME_H_DEFINES_STRUCT_TIMESPEC])
+    else
+      AC_CACHE_CHECK([for struct timespec in <pthread.h>],
+        [bash_cv_sys_struct_timespec_in_pthread_h],
+        [AC_COMPILE_IFELSE(
+           [AC_LANG_PROGRAM(
+              [[#include <pthread.h>
+              ]],
+              [[static struct timespec x; x.tv_sec = x.tv_nsec;]])],
+           [bash_cv_sys_struct_timespec_in_pthread_h=yes],
+           [bash_cv_sys_struct_timespec_in_pthread_h=no])])
+      if test $bash_cv_sys_struct_timespec_in_pthread_h = yes; then
+        PTHREAD_H_DEFINES_STRUCT_TIMESPEC=1
+	AC_DEFINE([HAVE_STRUCT_TIMESPEC])
+	AC_DEFINE([PTHREAD_H_DEFINES_STRUCT_TIMESPEC])
+      fi
+    fi
+  fi
+  AC_SUBST([TIME_H_DEFINES_STRUCT_TIMESPEC])
+  AC_SUBST([SYS_TIME_H_DEFINES_STRUCT_TIMESPEC])
+  AC_SUBST([PTHREAD_H_DEFINES_STRUCT_TIMESPEC])
+
+])
diff --git a/m4/uintmax_t.m4 b/m4/uintmax_t.m4
new file mode 100644
index 0000000..2926bea
--- /dev/null
+++ b/m4/uintmax_t.m4
@@ -0,0 +1,30 @@
+# uintmax_t.m4 serial 12
+dnl Copyright (C) 1997-2004, 2007-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Paul Eggert.
+
+AC_PREREQ([2.13])
+
+# Define uintmax_t to 'unsigned long' or 'unsigned long long'
+# if it is not already defined in <stdint.h> or <inttypes.h>.
+
+AC_DEFUN([gl_AC_TYPE_UINTMAX_T],
+[
+  AC_REQUIRE([gl_AC_HEADER_INTTYPES_H])
+  AC_REQUIRE([gl_AC_HEADER_STDINT_H])
+  if test $gl_cv_header_inttypes_h = no && test $gl_cv_header_stdint_h = no; then
+    AC_REQUIRE([AC_TYPE_UNSIGNED_LONG_LONG_INT])
+    test $ac_cv_type_unsigned_long_long_int = yes \
+      && ac_type='unsigned long long' \
+      || ac_type='unsigned long'
+    AC_DEFINE_UNQUOTED([uintmax_t], [$ac_type],
+      [Define to unsigned long or unsigned long long
+       if <stdint.h> and <inttypes.h> don't define.])
+  else
+    AC_DEFINE([HAVE_UINTMAX_T], [1],
+      [Define if you have the 'uintmax_t' type in <stdint.h> or <inttypes.h>.])
+  fi
+])
diff --git a/m4/ulonglong.m4 b/m4/ulonglong.m4
new file mode 100644
index 0000000..58b5334
--- /dev/null
+++ b/m4/ulonglong.m4
@@ -0,0 +1,5 @@
+# ulonglong.m4 serial 10
+dnl Copyright (C) 1999-2007, 2009-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
diff --git a/m4/visibility.m4 b/m4/visibility.m4
new file mode 100644
index 0000000..8c266a8
--- /dev/null
+++ b/m4/visibility.m4
@@ -0,0 +1,77 @@
+# visibility.m4 serial 6
+dnl Copyright (C) 2005, 2008, 2010-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+dnl Tests whether the compiler supports the command-line option
+dnl -fvisibility=hidden and the function and variable attributes
+dnl __attribute__((__visibility__("hidden"))) and
+dnl __attribute__((__visibility__("default"))).
+dnl Does *not* test for __visibility__("protected") - which has tricky
+dnl semantics (see the 'vismain' test in glibc) and does not exist e.g. on
+dnl Mac OS X.
+dnl Does *not* test for __visibility__("internal") - which has processor
+dnl dependent semantics.
+dnl Does *not* test for #pragma GCC visibility push(hidden) - which is
+dnl "really only recommended for legacy code".
+dnl Set the variable CFLAG_VISIBILITY.
+dnl Defines and sets the variable HAVE_VISIBILITY.
+
+AC_DEFUN([gl_VISIBILITY],
+[
+  AC_REQUIRE([AC_PROG_CC])
+  CFLAG_VISIBILITY=
+  HAVE_VISIBILITY=0
+  if test -n "$GCC"; then
+    dnl First, check whether -Werror can be added to the command line, or
+    dnl whether it leads to an error because of some other option that the
+    dnl user has put into $CC $CFLAGS $CPPFLAGS.
+    AC_CACHE_CHECK([whether the -Werror option is usable],
+      [gl_cv_cc_vis_werror],
+      [gl_save_CFLAGS="$CFLAGS"
+       CFLAGS="$CFLAGS -Werror"
+       AC_COMPILE_IFELSE(
+         [AC_LANG_PROGRAM([[]], [[]])],
+         [gl_cv_cc_vis_werror=yes],
+         [gl_cv_cc_vis_werror=no])
+       CFLAGS="$gl_save_CFLAGS"
+      ])
+    dnl Now check whether visibility declarations are supported.
+    AC_CACHE_CHECK([for simple visibility declarations],
+      [gl_cv_cc_visibility],
+      [gl_save_CFLAGS="$CFLAGS"
+       CFLAGS="$CFLAGS -fvisibility=hidden"
+       dnl We use the option -Werror and a function dummyfunc, because on some
+       dnl platforms (Cygwin 1.7) the use of -fvisibility triggers a warning
+       dnl "visibility attribute not supported in this configuration; ignored"
+       dnl at the first function definition in every compilation unit, and we
+       dnl don't want to use the option in this case.
+       if test $gl_cv_cc_vis_werror = yes; then
+         CFLAGS="$CFLAGS -Werror"
+       fi
+       AC_COMPILE_IFELSE(
+         [AC_LANG_PROGRAM(
+            [[extern __attribute__((__visibility__("hidden"))) int hiddenvar;
+              extern __attribute__((__visibility__("default"))) int exportedvar;
+              extern __attribute__((__visibility__("hidden"))) int hiddenfunc (void);
+              extern __attribute__((__visibility__("default"))) int exportedfunc (void);
+              void dummyfunc (void) {}
+            ]],
+            [[]])],
+         [gl_cv_cc_visibility=yes],
+         [gl_cv_cc_visibility=no])
+       CFLAGS="$gl_save_CFLAGS"
+      ])
+    if test $gl_cv_cc_visibility = yes; then
+      CFLAG_VISIBILITY="-fvisibility=hidden"
+      HAVE_VISIBILITY=1
+    fi
+  fi
+  AC_SUBST([CFLAG_VISIBILITY])
+  AC_SUBST([HAVE_VISIBILITY])
+  AC_DEFINE_UNQUOTED([HAVE_VISIBILITY], [$HAVE_VISIBILITY],
+    [Define to 1 or 0, depending whether the compiler supports simple visibility declarations.])
+])
diff --git a/m4/wchar_t.m4 b/m4/wchar_t.m4
new file mode 100644
index 0000000..5db5815
--- /dev/null
+++ b/m4/wchar_t.m4
@@ -0,0 +1,24 @@
+# wchar_t.m4 serial 4 (gettext-0.18.2)
+dnl Copyright (C) 2002-2003, 2008-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+dnl Test whether <stddef.h> has the 'wchar_t' type.
+dnl Prerequisite: AC_PROG_CC
+
+AC_DEFUN([gt_TYPE_WCHAR_T],
+[
+  AC_CACHE_CHECK([for wchar_t], [gt_cv_c_wchar_t],
+    [AC_COMPILE_IFELSE(
+       [AC_LANG_PROGRAM(
+          [[#include <stddef.h>
+            wchar_t foo = (wchar_t)'\0';]],
+          [[]])],
+       [gt_cv_c_wchar_t=yes],
+       [gt_cv_c_wchar_t=no])])
+  if test $gt_cv_c_wchar_t = yes; then
+    AC_DEFINE([HAVE_WCHAR_T], [1], [Define if you have the 'wchar_t' type.])
+  fi
+])
diff --git a/m4/wint_t.m4 b/m4/wint_t.m4
new file mode 100644
index 0000000..61e8a23
--- /dev/null
+++ b/m4/wint_t.m4
@@ -0,0 +1,74 @@
+# wint_t.m4 serial 7
+dnl Copyright (C) 2003, 2007-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+dnl Test whether <wchar.h> has the 'wint_t' type and whether gnulib's
+dnl <wchar.h> or <wctype.h> would, if present, override 'wint_t'.
+dnl Prerequisite: AC_PROG_CC
+
+AC_DEFUN([gt_TYPE_WINT_T],
+[
+  AC_CACHE_CHECK([for wint_t], [gt_cv_c_wint_t],
+    [AC_COMPILE_IFELSE(
+       [AC_LANG_PROGRAM(
+          [[
+/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
+   <wchar.h>.
+   BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be included
+   before <wchar.h>.  */
+#include <stddef.h>
+#include <stdio.h>
+#include <time.h>
+#include <wchar.h>
+            wint_t foo = (wchar_t)'\0';]],
+          [[]])],
+       [gt_cv_c_wint_t=yes],
+       [gt_cv_c_wint_t=no])])
+  if test $gt_cv_c_wint_t = yes; then
+    AC_DEFINE([HAVE_WINT_T], [1], [Define if you have the 'wint_t' type.])
+
+    dnl Determine whether gnulib's <wchar.h> or <wctype.h> would, if present,
+    dnl override 'wint_t'.
+    AC_CACHE_CHECK([whether wint_t is too small],
+      [gl_cv_type_wint_t_too_small],
+      [AC_COMPILE_IFELSE(
+           [AC_LANG_PROGRAM([[
+/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
+   <wchar.h>.
+   BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
+   included before <wchar.h>.  */
+#if !(defined __GLIBC__ && !defined __UCLIBC__)
+# include <stddef.h>
+# include <stdio.h>
+# include <time.h>
+#endif
+#include <wchar.h>
+              int verify[sizeof (wint_t) < sizeof (int) ? -1 : 1];
+              ]])],
+           [gl_cv_type_wint_t_too_small=no],
+           [gl_cv_type_wint_t_too_small=yes])])
+    if test $gl_cv_type_wint_t_too_small = yes; then
+      GNULIB_OVERRIDES_WINT_T=1
+    else
+      GNULIB_OVERRIDES_WINT_T=0
+    fi
+  else
+    GNULIB_OVERRIDES_WINT_T=0
+  fi
+  AC_SUBST([GNULIB_OVERRIDES_WINT_T])
+])
+
+dnl Prerequisites of the 'wint_t' override.
+AC_DEFUN([gl_TYPE_WINT_T_PREREQ],
+[
+  AC_CHECK_HEADERS_ONCE([crtdefs.h])
+  if test $ac_cv_header_crtdefs_h = yes; then
+    HAVE_CRTDEFS_H=1
+  else
+    HAVE_CRTDEFS_H=0
+  fi
+  AC_SUBST([HAVE_CRTDEFS_H])
+])
diff --git a/m4/xsize.m4 b/m4/xsize.m4
new file mode 100644
index 0000000..f2898ba
--- /dev/null
+++ b/m4/xsize.m4
@@ -0,0 +1,12 @@
+# xsize.m4 serial 5
+dnl Copyright (C) 2003-2004, 2008-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+AC_DEFUN([gl_XSIZE],
+[
+  dnl Prerequisites of lib/xsize.h.
+  AC_REQUIRE([gl_SIZE_MAX])
+  AC_CHECK_HEADERS([stdint.h])
+])
diff --git a/mailcheck.c b/mailcheck.c
new file mode 100644
index 0000000..4a11143
--- /dev/null
+++ b/mailcheck.c
@@ -0,0 +1,491 @@
+/* mailcheck.c -- The check is in the mail... */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include <stdio.h>
+#include "bashtypes.h"
+#include "posixstat.h"
+#if defined (HAVE_SYS_PARAM_H)
+#  include <sys/param.h>
+#endif
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+#include "posixtime.h"
+#include "bashansi.h"
+#include "bashintl.h"
+
+#include "shell.h"
+#include "execute_cmd.h"
+#include "mailcheck.h"
+#include <tilde/tilde.h>
+
+/* Values for flags word in struct _fileinfo */
+#define MBOX_INITIALIZED	0x01
+
+extern time_t shell_start_time;
+
+extern int mailstat PARAMS((const char *, struct stat *));
+
+typedef struct _fileinfo {
+  char *name;
+  char *msg;
+  time_t access_time;
+  time_t mod_time;
+  off_t file_size;
+  int flags;
+} FILEINFO;
+
+/* The list of remembered mail files. */
+static FILEINFO **mailfiles = (FILEINFO **)NULL;
+
+/* Number of mail files that we have. */
+static int mailfiles_count;
+
+/* The last known time that mail was checked. */
+static time_t last_time_mail_checked = 0;
+
+/* Non-zero means warn if a mail file has been read since last checked. */
+int mail_warning;
+
+static int find_mail_file PARAMS((char *));
+static void init_mail_file PARAMS((int));
+static void update_mail_file PARAMS((int));
+static int add_mail_file PARAMS((char *, char *));
+
+static FILEINFO *alloc_mail_file PARAMS((char *, char *));
+static void dispose_mail_file PARAMS((FILEINFO *));
+
+static int file_mod_date_changed PARAMS((int));
+static int file_access_date_changed PARAMS((int));
+static int file_has_grown PARAMS((int));
+
+static char *parse_mailpath_spec PARAMS((char *));
+
+/* Returns non-zero if it is time to check mail. */
+int
+time_to_check_mail ()
+{
+  char *temp;
+  time_t now;
+  intmax_t seconds;
+
+  temp = get_string_value ("MAILCHECK");
+
+  /* Negative number, or non-numbers (such as empty string) cause no
+     checking to take place. */
+  if (temp == 0 || legal_number (temp, &seconds) == 0 || seconds < 0)
+    return (0);
+
+  now = NOW;
+  /* Time to check if MAILCHECK is explicitly set to zero, or if enough
+     time has passed since the last check. */
+  return (seconds == 0 || ((now - last_time_mail_checked) >= seconds));
+}
+
+/* Okay, we have checked the mail.  Perhaps I should make this function
+   go away. */
+void
+reset_mail_timer ()
+{
+  last_time_mail_checked = NOW;
+}
+
+/* Locate a file in the list.  Return index of
+   entry, or -1 if not found. */
+static int
+find_mail_file (file)
+     char *file;
+{
+  register int i;
+
+  for (i = 0; i < mailfiles_count; i++)
+    if (STREQ (mailfiles[i]->name, file))
+      return i;
+
+  return -1;
+}
+
+#define RESET_MAIL_FILE(i) \
+  do \
+    { \
+      mailfiles[i]->access_time = mailfiles[i]->mod_time = 0; \
+      mailfiles[i]->file_size = 0; \
+      mailfiles[i]->flags = 0; \
+    } \
+  while (0)
+
+#define UPDATE_MAIL_FILE(i, finfo) \
+  do \
+    { \
+      mailfiles[i]->access_time = finfo.st_atime; \
+      mailfiles[i]->mod_time = finfo.st_mtime; \
+      mailfiles[i]->file_size = finfo.st_size; \
+      mailfiles[i]->flags |= MBOX_INITIALIZED; \
+    } \
+  while (0)
+
+static void
+init_mail_file (i)
+     int i;
+{
+  mailfiles[i]->access_time = mailfiles[i]->mod_time = last_time_mail_checked ? last_time_mail_checked : shell_start_time;
+  mailfiles[i]->file_size = 0;
+  mailfiles[i]->flags = 0;
+}
+
+static void
+update_mail_file (i)
+     int i;
+{
+  char *file;
+  struct stat finfo;
+
+  file = mailfiles[i]->name;
+  if (mailstat (file, &finfo) == 0)
+    UPDATE_MAIL_FILE (i, finfo);
+  else
+    RESET_MAIL_FILE (i);
+}
+
+/* Add this file to the list of remembered files and return its index
+   in the list of mail files. */
+static int
+add_mail_file (file, msg)
+     char *file, *msg;
+{
+  struct stat finfo;
+  char *filename;
+  int i;
+
+  filename = full_pathname (file);
+  i = find_mail_file (filename);
+  if (i >= 0)
+    {
+      if (mailstat (filename, &finfo) == 0)
+	UPDATE_MAIL_FILE (i, finfo);
+
+      free (filename);
+      return i;
+    }
+
+  i = mailfiles_count++;
+  mailfiles = (FILEINFO **)xrealloc
+		(mailfiles, mailfiles_count * sizeof (FILEINFO *));
+
+  mailfiles[i] = alloc_mail_file (filename, msg);
+  init_mail_file (i);
+
+  return i;
+}
+
+/* Reset the existing mail files access and modification times to zero. */
+void
+reset_mail_files ()
+{
+  register int i;
+
+  for (i = 0; i < mailfiles_count; i++)
+    RESET_MAIL_FILE (i);
+}
+
+static FILEINFO *
+alloc_mail_file (filename, msg)
+     char *filename, *msg;
+{
+  FILEINFO *mf;
+
+  mf = (FILEINFO *)xmalloc (sizeof (FILEINFO));
+  mf->name = filename;
+  mf->msg = msg ? savestring (msg) : (char *)NULL;
+  mf->flags = 0;
+
+  return mf;
+}
+
+static void
+dispose_mail_file (mf)
+     FILEINFO *mf;
+{
+  free (mf->name);
+  FREE (mf->msg);
+  free (mf);
+}
+
+/* Free the information that we have about the remembered mail files. */
+void
+free_mail_files ()
+{
+  register int i;
+
+  for (i = 0; i < mailfiles_count; i++)
+    dispose_mail_file (mailfiles[i]);
+
+  if (mailfiles)
+    free (mailfiles);
+
+  mailfiles_count = 0;
+  mailfiles = (FILEINFO **)NULL;
+}
+
+void
+init_mail_dates ()
+{
+  if (mailfiles == 0)
+    remember_mail_dates ();
+}
+
+/* Return non-zero if FILE's mod date has changed and it has not been
+   accessed since modified.  If the size has dropped to zero, reset
+   the cached mail file info. */
+static int
+file_mod_date_changed (i)
+     int i;
+{
+  time_t mtime;
+  struct stat finfo;
+  char *file;
+
+  file = mailfiles[i]->name;
+  mtime = mailfiles[i]->mod_time;
+
+  if (mailstat (file, &finfo) != 0)
+    return (0);
+
+  if (finfo.st_size > 0)
+    return (mtime < finfo.st_mtime);
+
+  if (finfo.st_size == 0 && mailfiles[i]->file_size > 0)
+    UPDATE_MAIL_FILE (i, finfo);
+
+  return (0);
+}
+
+/* Return non-zero if FILE's access date has changed. */
+static int
+file_access_date_changed (i)
+     int i;
+{
+  time_t atime;
+  struct stat finfo;
+  char *file;
+
+  file = mailfiles[i]->name;
+  atime = mailfiles[i]->access_time;
+
+  if (mailstat (file, &finfo) != 0)
+    return (0);
+
+  if (finfo.st_size > 0)
+    return (atime < finfo.st_atime);
+
+  return (0);
+}
+
+/* Return non-zero if FILE's size has increased. */
+static int
+file_has_grown (i)
+     int i;
+{
+  off_t size;
+  struct stat finfo;
+  char *file;
+
+  file = mailfiles[i]->name;
+  size = mailfiles[i]->file_size;
+
+  return ((mailstat (file, &finfo) == 0) && (finfo.st_size > size));
+}
+
+/* Take an element from $MAILPATH and return the portion from
+   the first unquoted `?' or `%' to the end of the string.  This is the
+   message to be printed when the file contents change. */
+static char *
+parse_mailpath_spec (str)
+     char *str;
+{
+  char *s;
+  int pass_next;
+
+  for (s = str, pass_next = 0; s && *s; s++)
+    {
+      if (pass_next)
+	{
+	  pass_next = 0;
+	  continue;
+	}
+      if (*s == '\\')
+	{
+	  pass_next++;
+	  continue;
+	}
+      if (*s == '?' || *s == '%')
+	return s;
+    }
+  return ((char *)NULL);
+}
+
+char *
+make_default_mailpath ()
+{
+#if defined (DEFAULT_MAIL_DIRECTORY)
+  char *mp;
+
+  get_current_user_info ();
+  mp = (char *)xmalloc (2 + sizeof (DEFAULT_MAIL_DIRECTORY) + strlen (current_user.user_name));
+  strcpy (mp, DEFAULT_MAIL_DIRECTORY);
+  mp[sizeof(DEFAULT_MAIL_DIRECTORY) - 1] = '/';
+  strcpy (mp + sizeof (DEFAULT_MAIL_DIRECTORY), current_user.user_name);
+  return (mp);
+#else
+  return ((char *)NULL);
+#endif
+}
+
+/* Remember the dates of the files specified by MAILPATH, or if there is
+   no MAILPATH, by the file specified in MAIL.  If neither exists, use a
+   default value, which we randomly concoct from using Unix. */
+
+void
+remember_mail_dates ()
+{
+  char *mailpaths;
+  char *mailfile, *mp;
+  int i = 0;
+
+  mailpaths = get_string_value ("MAILPATH");
+
+  /* If no $MAILPATH, but $MAIL, use that as a single filename to check. */
+  if (mailpaths == 0 && (mailpaths = get_string_value ("MAIL")))
+    {
+      add_mail_file (mailpaths, (char *)NULL);
+      return;
+    }
+
+  if (mailpaths == 0)
+    {
+      mailpaths = make_default_mailpath ();
+      if (mailpaths)
+	{
+	  add_mail_file (mailpaths, (char *)NULL);
+	  free (mailpaths);
+	}
+      return;
+    }
+
+  while (mailfile = extract_colon_unit (mailpaths, &i))
+    {
+      mp = parse_mailpath_spec (mailfile);
+      if (mp && *mp)
+	*mp++ = '\0';
+      add_mail_file (mailfile, mp);
+      free (mailfile);
+    }
+}
+
+/* check_mail () is useful for more than just checking mail.  Since it has
+   the paranoids dream ability of telling you when someone has read your
+   mail, it can just as easily be used to tell you when someones .profile
+   file has been read, thus letting one know when someone else has logged
+   in.  Pretty good, huh? */
+
+/* Check for mail in some files.  If the modification date of any
+   of the files in MAILPATH has changed since we last did a
+   remember_mail_dates () then mention that the user has mail.
+   Special hack:  If the variable MAIL_WARNING is non-zero and the
+   mail file has been accessed since the last time we remembered, then
+   the message "The mail in <mailfile> has been read" is printed. */
+void
+check_mail ()
+{
+  char *current_mail_file, *message;
+  int i, use_user_notification;
+  char *dollar_underscore, *temp;
+
+  dollar_underscore = get_string_value ("_");
+  if (dollar_underscore)
+    dollar_underscore = savestring (dollar_underscore);
+
+  for (i = 0; i < mailfiles_count; i++)
+    {
+      current_mail_file = mailfiles[i]->name;
+
+      if (*current_mail_file == '\0')
+	continue;
+
+      if (file_mod_date_changed (i))
+	{
+	  int file_is_bigger;
+
+	  use_user_notification = mailfiles[i]->msg != (char *)NULL;
+	  message = mailfiles[i]->msg ? mailfiles[i]->msg : _("You have mail in $_");
+
+	  bind_variable ("_", current_mail_file, 0);
+
+#define atime mailfiles[i]->access_time
+#define mtime mailfiles[i]->mod_time
+
+	  /* Have to compute this before the call to update_mail_file, which
+	     resets all the information. */
+	  file_is_bigger = file_has_grown (i);
+
+	  update_mail_file (i);
+
+	  /* If the user has just run a program which manipulates the
+	     mail file, then don't bother explaining that the mail
+	     file has been manipulated.  Since some systems don't change
+	     the access time to be equal to the modification time when
+	     the mail in the file is manipulated, check the size also.  If
+	     the file has not grown, continue. */
+	  if ((atime >= mtime) && !file_is_bigger)
+	    continue;
+
+	  /* If the mod time is later than the access time and the file
+	     has grown, note the fact that this is *new* mail. */
+	  if (use_user_notification == 0 && (atime < mtime) && file_is_bigger)
+	    message = _("You have new mail in $_");
+#undef atime
+#undef mtime
+
+	  if (temp = expand_string_to_string (message, Q_DOUBLE_QUOTES))
+	    {
+	      puts (temp);
+	      free (temp);
+	    }
+	  else
+	    putchar ('\n');
+	}
+
+      if (mail_warning && file_access_date_changed (i))
+	{
+	  update_mail_file (i);
+	  printf (_("The mail in %s has been read\n"), current_mail_file);
+	}
+    }
+
+  if (dollar_underscore)
+    {
+      bind_variable ("_", dollar_underscore, 0);
+      free (dollar_underscore);
+    }
+  else
+    unbind_variable ("_");
+}
diff --git a/mailcheck.h b/mailcheck.h
new file mode 100644
index 0000000..e930124
--- /dev/null
+++ b/mailcheck.h
@@ -0,0 +1,34 @@
+/* mailcheck.h -- variables and function declarations for mail checking. */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_MAILCHECK_H_)
+#define _MAILCHECK_H_
+
+/* Functions from mailcheck.c */
+extern int time_to_check_mail PARAMS((void));
+extern void reset_mail_timer PARAMS((void));
+extern void reset_mail_files PARAMS((void));
+extern void free_mail_files PARAMS((void));
+extern char *make_default_mailpath PARAMS((void));
+extern void remember_mail_dates PARAMS((void));
+extern void init_mail_dates PARAMS((void));
+extern void check_mail PARAMS((void));
+
+#endif /* _MAILCHECK_H */
diff --git a/make_cmd.c b/make_cmd.c
new file mode 100644
index 0000000..2d7ac96
--- /dev/null
+++ b/make_cmd.c
@@ -0,0 +1,896 @@
+/* make_cmd.c -- Functions for making instances of the various
+   parser constructs. */
+
+/* Copyright (C) 1989-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include <stdio.h>
+#include "bashtypes.h"
+#if !defined (_MINIX) && defined (HAVE_SYS_FILE_H)
+#  include <sys/file.h>
+#endif
+#include "filecntl.h"
+#include "bashansi.h"
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "bashintl.h"
+
+#include "shell.h"
+#include "execute_cmd.h"
+#include "parser.h"
+#include "flags.h"
+#include "input.h"
+
+#if defined (JOB_CONTROL)
+#include "jobs.h"
+#endif
+
+#include "shmbutil.h"
+
+int here_doc_first_line = 0;
+
+/* Object caching */
+sh_obj_cache_t wdcache = {0, 0, 0};
+sh_obj_cache_t wlcache = {0, 0, 0};
+
+#define WDCACHESIZE	128
+#define WLCACHESIZE	128
+
+static COMMAND *make_for_or_select PARAMS((enum command_type, WORD_DESC *, WORD_LIST *, COMMAND *, int));
+#if defined (ARITH_FOR_COMMAND)
+static WORD_LIST *make_arith_for_expr PARAMS((char *));
+#endif
+static COMMAND *make_until_or_while PARAMS((enum command_type, COMMAND *, COMMAND *));
+
+void
+cmd_init ()
+{
+  ocache_create (wdcache, WORD_DESC, WDCACHESIZE);
+  ocache_create (wlcache, WORD_LIST, WLCACHESIZE);
+}
+
+WORD_DESC *
+alloc_word_desc ()
+{
+  WORD_DESC *temp;
+
+  ocache_alloc (wdcache, WORD_DESC, temp);
+  temp->flags = 0;
+  temp->word = 0;
+  return temp;
+}
+
+WORD_DESC *
+make_bare_word (string)
+     const char *string;
+{
+  WORD_DESC *temp;
+
+  temp = alloc_word_desc ();
+
+  if (*string)
+    temp->word = savestring (string);
+  else
+    {
+      temp->word = (char *)xmalloc (1);
+      temp->word[0] = '\0';
+    }
+
+  return (temp);
+}
+
+WORD_DESC *
+make_word_flags (w, string)
+     WORD_DESC *w;
+     const char *string;
+{
+  register int i;
+  size_t slen;
+  DECLARE_MBSTATE;
+
+  i = 0;
+  slen = strlen (string);
+  while (i < slen)
+    {
+      switch (string[i])
+	{
+	case '$':
+	  w->flags |= W_HASDOLLAR;
+	  break;
+	case '\\':
+	  break;	/* continue the loop */
+	case '\'':
+	case '`':
+	case '"':
+	  w->flags |= W_QUOTED;
+	  break;
+	}
+
+      ADVANCE_CHAR (string, slen, i);
+    }
+
+  return (w);
+}
+
+WORD_DESC *
+make_word (string)
+     const char *string;
+{
+  WORD_DESC *temp;
+
+  temp = make_bare_word (string);
+  return (make_word_flags (temp, string));
+}
+
+WORD_DESC *
+make_word_from_token (token)
+     int token;
+{
+  char tokenizer[2];
+
+  tokenizer[0] = token;
+  tokenizer[1] = '\0';
+
+  return (make_word (tokenizer));
+}
+
+WORD_LIST *
+make_word_list (word, wlink)
+     WORD_DESC *word;
+     WORD_LIST *wlink;
+{
+  WORD_LIST *temp;
+
+  ocache_alloc (wlcache, WORD_LIST, temp);
+
+  temp->word = word;
+  temp->next = wlink;
+  return (temp);
+}
+
+COMMAND *
+make_command (type, pointer)
+     enum command_type type;
+     SIMPLE_COM *pointer;
+{
+  COMMAND *temp;
+
+  temp = (COMMAND *)xmalloc (sizeof (COMMAND));
+  temp->type = type;
+  temp->value.Simple = pointer;
+  temp->value.Simple->flags = temp->flags = 0;
+  temp->redirects = (REDIRECT *)NULL;
+  return (temp);
+}
+
+COMMAND *
+command_connect (com1, com2, connector)
+     COMMAND *com1, *com2;
+     int connector;
+{
+  CONNECTION *temp;
+
+  temp = (CONNECTION *)xmalloc (sizeof (CONNECTION));
+  temp->connector = connector;
+  temp->first = com1;
+  temp->second = com2;
+  return (make_command (cm_connection, (SIMPLE_COM *)temp));
+}
+
+static COMMAND *
+make_for_or_select (type, name, map_list, action, lineno)
+     enum command_type type;
+     WORD_DESC *name;
+     WORD_LIST *map_list;
+     COMMAND *action;
+     int lineno;
+{
+  FOR_COM *temp;
+
+  temp = (FOR_COM *)xmalloc (sizeof (FOR_COM));
+  temp->flags = 0;
+  temp->name = name;
+  temp->line = lineno;
+  temp->map_list = map_list;
+  temp->action = action;
+  return (make_command (type, (SIMPLE_COM *)temp));
+}
+
+COMMAND *
+make_for_command (name, map_list, action, lineno)
+     WORD_DESC *name;
+     WORD_LIST *map_list;
+     COMMAND *action;
+     int lineno;
+{
+  return (make_for_or_select (cm_for, name, map_list, action, lineno));
+}
+
+COMMAND *
+make_select_command (name, map_list, action, lineno)
+     WORD_DESC *name;
+     WORD_LIST *map_list;
+     COMMAND *action;
+     int lineno;
+{
+#if defined (SELECT_COMMAND)
+  return (make_for_or_select (cm_select, name, map_list, action, lineno));
+#else
+  set_exit_status (2);
+  return ((COMMAND *)NULL);
+#endif
+}
+
+#if defined (ARITH_FOR_COMMAND)
+static WORD_LIST *
+make_arith_for_expr (s)
+     char *s;
+{
+  WORD_LIST *result;
+  WORD_DESC *wd;
+
+  if (s == 0 || *s == '\0')
+    return ((WORD_LIST *)NULL);
+  wd = make_word (s);
+  wd->flags |= W_NOGLOB|W_NOSPLIT|W_QUOTED|W_DQUOTE;	/* no word splitting or globbing */
+#if defined (PROCESS_SUBSTITUTION)
+  wd->flags |= W_NOPROCSUB;	/* no process substitution */
+#endif
+  result = make_word_list (wd, (WORD_LIST *)NULL);
+  return result;
+}
+#endif
+
+/* Note that this function calls dispose_words on EXPRS, since it doesn't
+   use the word list directly.  We free it here rather than at the caller
+   because no other function in this file requires that the caller free
+   any arguments. */
+COMMAND *
+make_arith_for_command (exprs, action, lineno)
+     WORD_LIST *exprs;
+     COMMAND *action;
+     int lineno;
+{
+#if defined (ARITH_FOR_COMMAND)
+  ARITH_FOR_COM *temp;
+  WORD_LIST *init, *test, *step;
+  char *s, *t, *start;
+  int nsemi, i;
+
+  init = test = step = (WORD_LIST *)NULL;
+  /* Parse the string into the three component sub-expressions. */
+  start = t = s = exprs->word->word;
+  for (nsemi = 0; ;)
+    {
+      /* skip whitespace at the start of each sub-expression. */
+      while (whitespace (*s))
+	s++;
+      start = s;
+      /* skip to the semicolon or EOS */
+      i = skip_to_delim (start, 0, ";", SD_NOJMP|SD_NOPROCSUB);
+      s = start + i;
+
+      t = (i > 0) ? substring (start, 0, i) : (char *)NULL;
+
+      nsemi++;
+      switch (nsemi)
+	{
+	case 1:
+	  init = make_arith_for_expr (t);
+	  break;
+	case 2:
+	  test = make_arith_for_expr (t);
+	  break;
+	case 3:
+	  step = make_arith_for_expr (t);
+	  break;
+	}
+
+      FREE (t);
+      if (*s == '\0')
+	break;
+      s++;	/* skip over semicolon */
+    }
+
+  if (nsemi != 3)
+    {
+      if (nsemi < 3)
+	parser_error (lineno, _("syntax error: arithmetic expression required"));
+      else
+	parser_error (lineno, _("syntax error: `;' unexpected"));
+      parser_error (lineno, _("syntax error: `((%s))'"), exprs->word->word);
+      free (init);
+      free (test);
+      free (step);
+      set_exit_status (2);
+      return ((COMMAND *)NULL);
+    }
+
+  temp = (ARITH_FOR_COM *)xmalloc (sizeof (ARITH_FOR_COM));
+  temp->flags = 0;
+  temp->line = lineno;
+  temp->init = init ? init : make_arith_for_expr ("1");
+  temp->test = test ? test : make_arith_for_expr ("1");
+  temp->step = step ? step : make_arith_for_expr ("1");
+  temp->action = action;
+
+  dispose_words (exprs);
+  return (make_command (cm_arith_for, (SIMPLE_COM *)temp));
+#else
+  dispose_words (exprs);
+  set_exit_status (2);
+  return ((COMMAND *)NULL);
+#endif /* ARITH_FOR_COMMAND */
+}
+
+COMMAND *
+make_group_command (command)
+     COMMAND *command;
+{
+  GROUP_COM *temp;
+
+  temp = (GROUP_COM *)xmalloc (sizeof (GROUP_COM));
+  temp->command = command;
+  return (make_command (cm_group, (SIMPLE_COM *)temp));
+}
+
+COMMAND *
+make_case_command (word, clauses, lineno)
+     WORD_DESC *word;
+     PATTERN_LIST *clauses;
+     int lineno;
+{
+  CASE_COM *temp;
+
+  temp = (CASE_COM *)xmalloc (sizeof (CASE_COM));
+  temp->flags = 0;
+  temp->line = lineno;
+  temp->word = word;
+  temp->clauses = REVERSE_LIST (clauses, PATTERN_LIST *);
+  return (make_command (cm_case, (SIMPLE_COM *)temp));
+}
+
+PATTERN_LIST *
+make_pattern_list (patterns, action)
+     WORD_LIST *patterns;
+     COMMAND *action;
+{
+  PATTERN_LIST *temp;
+
+  temp = (PATTERN_LIST *)xmalloc (sizeof (PATTERN_LIST));
+  temp->patterns = REVERSE_LIST (patterns, WORD_LIST *);
+  temp->action = action;
+  temp->next = NULL;
+  temp->flags = 0;
+  return (temp);
+}
+
+COMMAND *
+make_if_command (test, true_case, false_case)
+     COMMAND *test, *true_case, *false_case;
+{
+  IF_COM *temp;
+
+  temp = (IF_COM *)xmalloc (sizeof (IF_COM));
+  temp->flags = 0;
+  temp->test = test;
+  temp->true_case = true_case;
+  temp->false_case = false_case;
+  return (make_command (cm_if, (SIMPLE_COM *)temp));
+}
+
+static COMMAND *
+make_until_or_while (which, test, action)
+     enum command_type which;
+     COMMAND *test, *action;
+{
+  WHILE_COM *temp;
+
+  temp = (WHILE_COM *)xmalloc (sizeof (WHILE_COM));
+  temp->flags = 0;
+  temp->test = test;
+  temp->action = action;
+  return (make_command (which, (SIMPLE_COM *)temp));
+}
+
+COMMAND *
+make_while_command (test, action)
+     COMMAND *test, *action;
+{
+  return (make_until_or_while (cm_while, test, action));
+}
+
+COMMAND *
+make_until_command (test, action)
+     COMMAND *test, *action;
+{
+  return (make_until_or_while (cm_until, test, action));
+}
+
+COMMAND *
+make_arith_command (exp)
+     WORD_LIST *exp;
+{
+#if defined (DPAREN_ARITHMETIC)
+  COMMAND *command;
+  ARITH_COM *temp;
+
+  command = (COMMAND *)xmalloc (sizeof (COMMAND));
+  command->value.Arith = temp = (ARITH_COM *)xmalloc (sizeof (ARITH_COM));
+
+  temp->flags = 0;
+  temp->line = line_number;
+  temp->exp = exp;
+
+  command->type = cm_arith;
+  command->redirects = (REDIRECT *)NULL;
+  command->flags = 0;
+
+  return (command);
+#else
+  set_exit_status (2);
+  return ((COMMAND *)NULL);
+#endif
+}
+
+#if defined (COND_COMMAND)
+struct cond_com *
+make_cond_node (type, op, left, right)
+     int type;
+     WORD_DESC *op;
+     struct cond_com *left, *right;
+{
+  COND_COM *temp;
+
+  temp = (COND_COM *)xmalloc (sizeof (COND_COM));
+  temp->flags = 0;
+  temp->line = line_number;
+  temp->type = type;
+  temp->op = op;
+  temp->left = left;
+  temp->right = right;
+
+  return (temp);
+}
+#endif
+
+COMMAND *
+make_cond_command (cond_node)
+     COND_COM *cond_node;
+{
+#if defined (COND_COMMAND)
+  COMMAND *command;
+
+  command = (COMMAND *)xmalloc (sizeof (COMMAND));
+  command->value.Cond = cond_node;
+
+  command->type = cm_cond;
+  command->redirects = (REDIRECT *)NULL;
+  command->flags = 0;
+  command->line = cond_node ? cond_node->line : 0;
+
+  return (command);
+#else
+  set_exit_status (2);
+  return ((COMMAND *)NULL);
+#endif
+}
+
+COMMAND *
+make_bare_simple_command ()
+{
+  COMMAND *command;
+  SIMPLE_COM *temp;
+
+  command = (COMMAND *)xmalloc (sizeof (COMMAND));
+  command->value.Simple = temp = (SIMPLE_COM *)xmalloc (sizeof (SIMPLE_COM));
+
+  temp->flags = 0;
+  temp->line = line_number;
+  temp->words = (WORD_LIST *)NULL;
+  temp->redirects = (REDIRECT *)NULL;
+
+  command->type = cm_simple;
+  command->redirects = (REDIRECT *)NULL;
+  command->flags = 0;
+
+  return (command);
+}
+
+/* Return a command which is the connection of the word or redirection
+   in ELEMENT, and the command * or NULL in COMMAND. */
+COMMAND *
+make_simple_command (element, command)
+     ELEMENT element;
+     COMMAND *command;
+{
+  /* If we are starting from scratch, then make the initial command
+     structure.  Also note that we have to fill in all the slots, since
+     malloc doesn't return zeroed space. */
+  if (command == 0)
+    {
+      command = make_bare_simple_command ();
+      parser_state |= PST_REDIRLIST;
+    }
+
+  if (element.word)
+    {
+      command->value.Simple->words = make_word_list (element.word, command->value.Simple->words);
+      parser_state &= ~PST_REDIRLIST;
+    }
+  else if (element.redirect)
+    {
+      REDIRECT *r = element.redirect;
+      /* Due to the way <> is implemented, there may be more than a single
+	 redirection in element.redirect.  We just follow the chain as far
+	 as it goes, and hook onto the end. */
+      while (r->next)
+	r = r->next;
+      r->next = command->value.Simple->redirects;
+      command->value.Simple->redirects = element.redirect;
+    }
+
+  return (command);
+}
+
+/* Because we are Bourne compatible, we read the input for this
+   << or <<- redirection now, from wherever input is coming from.
+   We store the input read into a WORD_DESC.  Replace the text of
+   the redirectee.word with the new input text.  If <<- is on,
+   then remove leading TABS from each line. */
+void
+make_here_document (temp, lineno)
+     REDIRECT *temp;
+     int lineno;
+{
+  int kill_leading, redir_len;
+  char *redir_word, *document, *full_line;
+  int document_index, document_size, delim_unquoted;
+
+  if (temp->instruction != r_deblank_reading_until &&
+      temp->instruction != r_reading_until)
+    {
+      internal_error (_("make_here_document: bad instruction type %d"), temp->instruction);
+      return;
+    }
+
+  kill_leading = temp->instruction == r_deblank_reading_until;
+
+  document = (char *)NULL;
+  document_index = document_size = 0;
+
+  /* Quote removal is the only expansion performed on the delimiter
+     for here documents, making it an extremely special case. */
+  redir_word = string_quote_removal (temp->redirectee.filename->word, 0);
+
+  /* redirection_expand will return NULL if the expansion results in
+     multiple words or no words.  Check for that here, and just abort
+     this here document if it does. */
+  if (redir_word)
+    redir_len = strlen (redir_word);
+  else
+    {
+      temp->here_doc_eof = (char *)xmalloc (1);
+      temp->here_doc_eof[0] = '\0';
+      goto document_done;
+    }
+
+  free (temp->redirectee.filename->word);
+  temp->here_doc_eof = redir_word;
+
+  /* Read lines from wherever lines are coming from.
+     For each line read, if kill_leading, then kill the
+     leading tab characters.
+     If the line matches redir_word exactly, then we have
+     manufactured the document.  Otherwise, add the line to the
+     list of lines in the document. */
+
+  /* If the here-document delimiter was quoted, the lines should
+     be read verbatim from the input.  If it was not quoted, we
+     need to perform backslash-quoted newline removal. */
+  delim_unquoted = (temp->redirectee.filename->flags & W_QUOTED) == 0;
+  while (full_line = read_secondary_line (delim_unquoted))
+    {
+      register char *line;
+      int len;
+
+      here_doc_first_line = 0;
+      line = full_line;
+      line_number++;
+
+      /* If set -v is in effect, echo the line read.  read_secondary_line/
+	 read_a_line leaves the newline at the end, so don't print another. */
+      if (echo_input_at_read)
+	fprintf (stderr, "%s", line);
+
+      if (kill_leading && *line)
+	{
+	  /* Hack:  To be compatible with some Bourne shells, we
+	     check the word before stripping the whitespace.  This
+	     is a hack, though. */
+	  if (STREQN (line, redir_word, redir_len) && line[redir_len] == '\n')
+	    goto document_done;
+
+	  while (*line == '\t')
+	    line++;
+	}
+
+      if (*line == 0)
+	continue;
+
+      if (STREQN (line, redir_word, redir_len) && line[redir_len] == '\n')
+	goto document_done;
+
+      len = strlen (line);
+      if (len + document_index >= document_size)
+	{
+	  document_size = document_size ? 2 * (document_size + len) : len + 2;
+	  document = (char *)xrealloc (document, document_size);
+	}
+
+      /* len is guaranteed to be > 0 because of the check for line
+	 being an empty string before the call to strlen. */
+      FASTCOPY (line, document + document_index, len);
+      document_index += len;
+    }
+
+  if (full_line == 0)
+    internal_warning (_("here-document at line %d delimited by end-of-file (wanted `%s')"), lineno, redir_word);
+
+document_done:
+  if (document)
+    document[document_index] = '\0';
+  else
+    {
+      document = (char *)xmalloc (1);
+      document[0] = '\0';
+    }
+  temp->redirectee.filename->word = document;
+  here_doc_first_line = 0;
+}
+
+/* Generate a REDIRECT from SOURCE, DEST, and INSTRUCTION.
+   INSTRUCTION is the instruction type, SOURCE is a file descriptor,
+   and DEST is a file descriptor or a WORD_DESC *. */
+REDIRECT *
+make_redirection (source, instruction, dest_and_filename, flags)
+     REDIRECTEE source;
+     enum r_instruction instruction;
+     REDIRECTEE dest_and_filename;
+     int flags;
+{
+  REDIRECT *temp;
+  WORD_DESC *w;
+  int wlen;
+  intmax_t lfd;
+
+  temp = (REDIRECT *)xmalloc (sizeof (REDIRECT));
+
+  /* First do the common cases. */
+  temp->redirector = source;
+  temp->redirectee = dest_and_filename;
+  temp->here_doc_eof = 0;
+  temp->instruction = instruction;
+  temp->flags = 0;
+  temp->rflags = flags;
+  temp->next = (REDIRECT *)NULL;
+
+  switch (instruction)
+    {
+
+    case r_output_direction:		/* >foo */
+    case r_output_force:		/* >| foo */
+    case r_err_and_out:			/* &>filename */
+      temp->flags = O_TRUNC | O_WRONLY | O_CREAT;
+      break;
+
+    case r_appending_to:		/* >>foo */
+    case r_append_err_and_out:		/* &>> filename */
+      temp->flags = O_APPEND | O_WRONLY | O_CREAT;
+      break;
+
+    case r_input_direction:		/* <foo */
+    case r_inputa_direction:		/* foo & makes this. */
+      temp->flags = O_RDONLY;
+      break;
+
+    case r_input_output:		/* <>foo */
+      temp->flags = O_RDWR | O_CREAT;
+      break;
+
+    case r_deblank_reading_until: 	/* <<-foo */
+    case r_reading_until:		/* << foo */
+    case r_reading_string:		/* <<< foo */
+    case r_close_this:			/* <&- */
+    case r_duplicating_input:		/* 1<&2 */
+    case r_duplicating_output:		/* 1>&2 */
+      break;
+
+    /* the parser doesn't pass these. */
+    case r_move_input:			/* 1<&2- */
+    case r_move_output:			/* 1>&2- */
+    case r_move_input_word:		/* 1<&$foo- */
+    case r_move_output_word:		/* 1>&$foo- */
+      break;
+
+    /* The way the lexer works we have to do this here. */
+    case r_duplicating_input_word:	/* 1<&$foo */
+    case r_duplicating_output_word:	/* 1>&$foo */
+      w = dest_and_filename.filename;
+      wlen = strlen (w->word) - 1;
+      if (w->word[wlen] == '-')		/* Yuck */
+        {
+          w->word[wlen] = '\0';
+	  if (all_digits (w->word) && legal_number (w->word, &lfd) && lfd == (int)lfd)
+	    {
+	      dispose_word (w);
+	      temp->instruction = (instruction == r_duplicating_input_word) ? r_move_input : r_move_output;
+	      temp->redirectee.dest = lfd;
+	    }
+	  else
+	    temp->instruction = (instruction == r_duplicating_input_word) ? r_move_input_word : r_move_output_word;
+        }
+          
+      break;
+
+    default:
+      programming_error (_("make_redirection: redirection instruction `%d' out of range"), instruction);
+      abort ();
+      break;
+    }
+  return (temp);
+}
+
+COMMAND *
+make_function_def (name, command, lineno, lstart)
+     WORD_DESC *name;
+     COMMAND *command;
+     int lineno, lstart;
+{
+  FUNCTION_DEF *temp;
+#if defined (ARRAY_VARS)
+  SHELL_VAR *bash_source_v;
+  ARRAY *bash_source_a;
+#endif
+
+  temp = (FUNCTION_DEF *)xmalloc (sizeof (FUNCTION_DEF));
+  temp->command = command;
+  temp->name = name;
+  temp->line = lineno;
+  temp->flags = 0;
+  command->line = lstart;
+
+  /* Information used primarily for debugging. */
+  temp->source_file = 0;
+#if defined (ARRAY_VARS)
+  GET_ARRAY_FROM_VAR ("BASH_SOURCE", bash_source_v, bash_source_a);
+  if (bash_source_a && array_num_elements (bash_source_a) > 0)
+    temp->source_file = array_reference (bash_source_a, 0);
+#endif
+  /* Assume that shell functions without a source file before the shell is
+     initialized come from the environment.  Otherwise default to "main"
+     (usually functions being defined interactively) */
+  if (temp->source_file == 0)
+    temp->source_file = shell_initialized ? "main" : "environment";
+
+#if defined (DEBUGGER)
+  bind_function_def (name->word, temp, 0);
+#endif
+
+  temp->source_file = temp->source_file ? savestring (temp->source_file) : 0;
+
+  return (make_command (cm_function_def, (SIMPLE_COM *)temp));
+}
+
+COMMAND *
+make_subshell_command (command)
+     COMMAND *command;
+{
+  SUBSHELL_COM *temp;
+
+  temp = (SUBSHELL_COM *)xmalloc (sizeof (SUBSHELL_COM));
+  temp->command = command;
+  temp->flags = CMD_WANT_SUBSHELL;
+  temp->line = line_number;
+  return (make_command (cm_subshell, (SIMPLE_COM *)temp));
+}
+
+COMMAND *
+make_coproc_command (name, command)
+     char *name;
+     COMMAND *command;
+{
+  COPROC_COM *temp;
+
+  temp = (COPROC_COM *)xmalloc (sizeof (COPROC_COM));
+  temp->name = savestring (name);
+  temp->command = command;
+  temp->flags = CMD_WANT_SUBSHELL|CMD_COPROC_SUBSHELL;
+  return (make_command (cm_coproc, (SIMPLE_COM *)temp));
+}
+
+/* Reverse the word list and redirection list in the simple command
+   has just been parsed.  It seems simpler to do this here the one
+   time then by any other method that I can think of. */
+COMMAND *
+clean_simple_command (command)
+     COMMAND *command;
+{
+  if (command->type != cm_simple)
+    command_error ("clean_simple_command", CMDERR_BADTYPE, command->type, 0);
+  else
+    {
+      command->value.Simple->words =
+	REVERSE_LIST (command->value.Simple->words, WORD_LIST *);
+      command->value.Simple->redirects =
+	REVERSE_LIST (command->value.Simple->redirects, REDIRECT *);
+    }
+
+  parser_state &= ~PST_REDIRLIST;
+  return (command);
+}
+
+/* The Yacc grammar productions have a problem, in that they take a
+   list followed by an ampersand (`&') and do a simple command connection,
+   making the entire list effectively asynchronous, instead of just
+   the last command.  This means that when the list is executed, all
+   the commands have stdin set to /dev/null when job control is not
+   active, instead of just the last.  This is wrong, and needs fixing
+   up.  This function takes the `&' and applies it to the last command
+   in the list.  This is done only for lists connected by `;'; it makes
+   `;' bind `tighter' than `&'. */
+COMMAND *
+connect_async_list (command, command2, connector)
+     COMMAND *command, *command2;
+     int connector;
+{
+  COMMAND *t, *t1, *t2;
+
+  t1 = command;
+  t = command->value.Connection->second;
+
+  if (!t || (command->flags & CMD_WANT_SUBSHELL) ||
+      command->value.Connection->connector != ';')
+    {
+      t = command_connect (command, command2, connector);
+      return t;
+    }
+
+  /* This is just defensive programming.  The Yacc precedence rules
+     will generally hand this function a command where t points directly
+     to the command we want (e.g. given a ; b ; c ; d &, t1 will point
+     to the `a ; b ; c' list and t will be the `d').  We only want to do
+     this if the list is not being executed as a unit in the background
+     with `( ... )', so we have to check for CMD_WANT_SUBSHELL.  That's
+     the only way to tell. */
+  while (((t->flags & CMD_WANT_SUBSHELL) == 0) && t->type == cm_connection &&
+	 t->value.Connection->connector == ';')
+    {
+      t1 = t;
+      t = t->value.Connection->second;
+    }
+  /* Now we have t pointing to the last command in the list, and
+     t1->value.Connection->second == t. */
+  t2 = command_connect (t, command2, connector);
+  t1->value.Connection->second = t2;
+  return command;
+}
diff --git a/make_cmd.h b/make_cmd.h
new file mode 100644
index 0000000..bf1fb00
--- /dev/null
+++ b/make_cmd.h
@@ -0,0 +1,72 @@
+/* make_cmd.h -- Declarations of functions found in make_cmd.c */
+
+/* Copyright (C) 1993-2009,2020  Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_MAKE_CMD_H_)
+#define _MAKE_CMD_H_
+
+#include "stdc.h"
+
+extern int here_doc_first_line;
+
+extern void cmd_init PARAMS((void));
+
+extern WORD_DESC *alloc_word_desc PARAMS((void));
+extern WORD_DESC *make_bare_word PARAMS((const char *));
+extern WORD_DESC *make_word_flags PARAMS((WORD_DESC *, const char *));
+extern WORD_DESC *make_word PARAMS((const char *));
+extern WORD_DESC *make_word_from_token PARAMS((int));
+
+extern WORD_LIST *make_word_list PARAMS((WORD_DESC *, WORD_LIST *));
+
+#define add_string_to_list(s, l) make_word_list (make_word(s), (l))
+
+extern COMMAND *make_command PARAMS((enum command_type, SIMPLE_COM *));
+extern COMMAND *command_connect PARAMS((COMMAND *, COMMAND *, int));
+extern COMMAND *make_for_command PARAMS((WORD_DESC *, WORD_LIST *, COMMAND *, int));
+extern COMMAND *make_group_command PARAMS((COMMAND *));
+extern COMMAND *make_case_command PARAMS((WORD_DESC *, PATTERN_LIST *, int));
+extern PATTERN_LIST *make_pattern_list PARAMS((WORD_LIST *, COMMAND *));
+extern COMMAND *make_if_command PARAMS((COMMAND *, COMMAND *, COMMAND *));
+extern COMMAND *make_while_command PARAMS((COMMAND *, COMMAND *));
+extern COMMAND *make_until_command PARAMS((COMMAND *, COMMAND *));
+extern COMMAND *make_bare_simple_command PARAMS((void));
+extern COMMAND *make_simple_command PARAMS((ELEMENT, COMMAND *));
+extern void make_here_document PARAMS((REDIRECT *, int));
+extern REDIRECT *make_redirection PARAMS((REDIRECTEE, enum r_instruction, REDIRECTEE, int));
+extern COMMAND *make_function_def PARAMS((WORD_DESC *, COMMAND *, int, int));
+extern COMMAND *clean_simple_command PARAMS((COMMAND *));
+
+extern COMMAND *make_arith_command PARAMS((WORD_LIST *));
+
+extern COMMAND *make_select_command PARAMS((WORD_DESC *, WORD_LIST *, COMMAND *, int));
+
+#if defined (COND_COMMAND)
+extern COND_COM *make_cond_node PARAMS((int, WORD_DESC *, COND_COM *, COND_COM *));
+extern COMMAND *make_cond_command PARAMS((COND_COM *));
+#endif
+
+extern COMMAND *make_arith_for_command PARAMS((WORD_LIST *, COMMAND *, int));
+
+extern COMMAND *make_subshell_command PARAMS((COMMAND *));
+extern COMMAND *make_coproc_command PARAMS((char *, COMMAND *));
+
+extern COMMAND *connect_async_list PARAMS((COMMAND *, COMMAND *, int));
+
+#endif /* !_MAKE_CMD_H */
diff --git a/mksyntax.c b/mksyntax.c
new file mode 100644
index 0000000..0385686
--- /dev/null
+++ b/mksyntax.c
@@ -0,0 +1,415 @@
+/*
+ * mksyntax.c - construct shell syntax table for fast char attribute lookup.
+ */
+
+/* Copyright (C) 2000-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include <stdio.h>
+#include "bashansi.h"
+#include "chartypes.h"
+#include <errno.h>
+
+#ifdef HAVE_UNISTD_H
+#  include <unistd.h>
+#endif
+
+#include "syntax.h"
+
+extern int optind;
+extern char *optarg;
+
+#ifndef errno
+extern int errno;
+#endif
+
+#ifndef HAVE_STRERROR
+extern char *strerror();
+#endif
+
+struct wordflag {
+	int	flag;
+	char	*fstr;
+} wordflags[] = {
+	{ CWORD,	"CWORD" },
+	{ CSHMETA,	"CSHMETA" },
+	{ CSHBRK,	"CSHBRK" },
+	{ CBACKQ,	"CBACKQ" },
+	{ CQUOTE,	"CQUOTE" },
+	{ CSPECL,	"CSPECL" },
+	{ CEXP,		"CEXP" },
+	{ CBSDQUOTE,	"CBSDQUOTE" },
+	{ CBSHDOC,	"CBSHDOC" },
+	{ CGLOB,	"CGLOB" },
+	{ CXGLOB,	"CXGLOB" },
+	{ CXQUOTE,	"CXQUOTE" },
+	{ CSPECVAR,	"CSPECVAR" },
+	{ CSUBSTOP,	"CSUBSTOP" },
+	{ CBLANK,	"CBLANK" },
+};
+	
+#define N_WFLAGS	(sizeof (wordflags) / sizeof (wordflags[0]))
+#define SYNSIZE		256
+
+int	lsyntax[SYNSIZE];
+int	debug;
+char	*progname;
+
+char	preamble[] = "\
+/*\n\
+ * This file was generated by mksyntax.  DO NOT EDIT.\n\
+ */\n\
+\n";
+
+char	includes[] = "\
+#include \"config.h\"\n\
+#include \"stdc.h\"\n\
+#include \"syntax.h\"\n\n";
+
+static void
+usage()
+{
+  fprintf (stderr, "%s: usage: %s [-d] [-o filename]\n", progname, progname);
+  exit (2);
+}
+
+#ifdef INCLUDE_UNUSED
+static int
+getcflag (s)
+     char *s;
+{
+  int i;
+
+  for (i = 0; i < N_WFLAGS; i++)
+    if (strcmp (s, wordflags[i].fstr) == 0)
+      return wordflags[i].flag;
+  return -1;
+}
+#endif
+
+static char *
+cdesc (i)
+     int i;
+{
+  static char xbuf[16];
+
+  if (i == ' ')
+    return "SPC";
+  else if (ISPRINT (i))
+    {
+      xbuf[0] = i;
+      xbuf[1] = '\0';
+      return (xbuf);
+    }
+  else if (i == CTLESC)
+    return "CTLESC";
+  else if (i == CTLNUL)
+    return "CTLNUL";
+  else if (i == '\033')		/* ASCII */
+    return "ESC";
+
+  xbuf[0] = '\\';
+  xbuf[2] = '\0';
+    
+  switch (i)
+    {
+#ifdef __STDC__
+    case '\a': xbuf[1] = 'a'; break;
+    case '\v': xbuf[1] = 'v'; break;
+#else
+    case '\007': xbuf[1] = 'a'; break;
+    case 0x0B: xbuf[1] = 'v'; break;
+#endif
+    case '\b': xbuf[1] = 'b'; break;
+    case '\f': xbuf[1] = 'f'; break;
+    case '\n': xbuf[1] = 'n'; break;
+    case '\r': xbuf[1] = 'r'; break;
+    case '\t': xbuf[1] = 't'; break;
+    default: sprintf (xbuf, "%d", i); break;
+    }
+
+  return xbuf;	
+}
+
+static char *
+getcstr (f)
+     int f;
+{
+  int i;
+
+  for (i = 0; i < N_WFLAGS; i++)
+    if (f == wordflags[i].flag)
+      return (wordflags[i].fstr);
+  return ((char *)NULL);
+}
+
+static void
+addcstr (str, flag)
+     char *str;
+     int flag;
+{
+  char *s, *fstr;
+  unsigned char uc;
+
+  for (s = str; s && *s; s++)
+    {
+      uc = *s;
+
+      if (debug)
+	{
+	  fstr = getcstr (flag);
+	  fprintf(stderr, "added %s for character %s\n", fstr, cdesc(uc));
+	}
+	
+      lsyntax[uc] |= flag;
+    }
+}
+
+static void
+addcchar (c, flag)
+     unsigned char c;
+     int flag;
+{
+  char *fstr;
+
+  if (debug)
+    {
+      fstr = getcstr (flag);
+      fprintf (stderr, "added %s for character %s\n", fstr, cdesc(c));
+    }
+  lsyntax[c] |= flag;
+}
+
+static void
+addblanks ()
+{
+  register int i;
+  unsigned char uc;
+
+  for (i = 0; i < SYNSIZE; i++)
+    {
+      uc = i;
+      /* Since we don't call setlocale(), this defaults to the "C" locale, and
+	 the default blank characters will be space and tab. */
+      if (isblank (uc))
+	lsyntax[uc] |= CBLANK;
+    }
+}
+
+/* load up the correct flag values in lsyntax */
+static void
+load_lsyntax ()
+{
+  /* shell metacharacters */
+  addcstr (shell_meta_chars, CSHMETA);
+
+  /* shell word break characters */
+  addcstr (shell_break_chars, CSHBRK);
+
+  addcchar ('`', CBACKQ);
+
+  addcstr (shell_quote_chars, CQUOTE);
+
+  addcchar (CTLESC, CSPECL);
+  addcchar (CTLNUL, CSPECL);
+
+  addcstr (shell_exp_chars, CEXP);
+
+  addcstr (slashify_in_quotes, CBSDQUOTE);
+  addcstr (slashify_in_here_document, CBSHDOC);
+
+  addcstr (shell_glob_chars, CGLOB);
+
+#if defined (EXTENDED_GLOB)
+  addcstr (ext_glob_chars, CXGLOB);
+#endif
+
+  addcstr (shell_quote_chars, CXQUOTE);
+  addcchar ('\\', CXQUOTE);
+
+  addcstr ("@*#?-$!", CSPECVAR);	/* omits $0...$9 and $_ */
+
+  addcstr ("-=?+", CSUBSTOP);		/* OP in ${paramOPword} */
+
+  addblanks ();
+}
+
+static void
+dump_lflags (fp, ind)
+     FILE *fp;
+     int ind;
+{
+  int xflags, first, i;
+
+  xflags = lsyntax[ind];
+  first = 1;
+
+  if (xflags == 0)
+    fputs (wordflags[0].fstr, fp);
+  else
+    {
+      for (i = 1; i < N_WFLAGS; i++)
+	if (xflags & wordflags[i].flag)
+	  {
+	    if (first)
+	      first = 0;
+	    else
+	      putc ('|', fp);
+	    fputs (wordflags[i].fstr, fp);
+  	  }
+    }
+}
+
+static void
+wcomment (fp, i)
+     FILE *fp;
+     int i;
+{
+  fputs ("\t\t/* ", fp);
+
+  fprintf (fp, "%s", cdesc(i));
+      
+  fputs (" */", fp);
+}
+
+static void
+dump_lsyntax (fp)
+     FILE *fp;
+{
+  int i;
+
+  fprintf (fp, "int sh_syntabsiz = %d;\n", SYNSIZE);
+  fprintf (fp, "int sh_syntaxtab[%d] = {\n", SYNSIZE);
+
+  for (i = 0; i < SYNSIZE; i++)
+    {
+      putc ('\t', fp);
+      dump_lflags (fp, i);
+      putc (',', fp);
+      wcomment (fp, i);
+      putc ('\n', fp);
+    }
+
+  fprintf (fp, "};\n");
+}
+
+int
+main(argc, argv)
+     int argc;
+     char **argv;
+{
+  int opt, i;
+  char *filename;
+  FILE *fp;
+
+  if ((progname = strrchr (argv[0], '/')) == 0)
+    progname = argv[0];
+  else
+    progname++;
+
+  filename = (char *)NULL;
+  debug = 0;
+
+  while ((opt = getopt (argc, argv, "do:")) != EOF)
+    {
+      switch (opt)
+	{
+	case 'd':
+	  debug = 1;
+	  break;
+	case 'o':
+	  filename = optarg;
+	  break;
+	default:
+	  usage();
+	}
+    }
+
+  argc -= optind;
+  argv += optind;
+
+  if (filename)
+    {
+      fp = fopen (filename, "w");
+      if (fp == 0)
+	{
+	  fprintf (stderr, "%s: %s: cannot open: %s\n", progname, filename, strerror(errno));
+	  exit (1);
+	}
+    }
+  else
+    {
+      filename = "stdout";
+      fp = stdout;
+    }
+
+
+  for (i = 0; i < SYNSIZE; i++)
+    lsyntax[i] = CWORD;
+
+  load_lsyntax ();
+
+  fprintf (fp, "%s\n", preamble);
+  fprintf (fp, "%s\n", includes);
+
+  dump_lsyntax (fp);
+
+  if (fp != stdout)
+    fclose (fp);
+  exit (0);
+}
+
+
+#if !defined (HAVE_STRERROR)
+
+#include <bashtypes.h>
+#if defined (HAVE_SYS_PARAM_H)
+#  include <sys/param.h>
+#endif
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+/* Return a string corresponding to the error number E.  From
+   the ANSI C spec. */
+#if defined (strerror)
+#  undef strerror
+#endif
+
+char *
+strerror (e)
+     int e;
+{
+  static char emsg[40];
+#if defined (HAVE_SYS_ERRLIST)
+  extern int sys_nerr;
+  extern char *sys_errlist[];
+
+  if (e > 0 && e < sys_nerr)
+    return (sys_errlist[e]);
+  else
+#endif /* HAVE_SYS_ERRLIST */
+    {
+      sprintf (emsg, "Unknown system error %d", e);
+      return (&emsg[0]);
+    }
+}
+#endif /* HAVE_STRERROR */
diff --git a/nojobs.c b/nojobs.c
new file mode 100644
index 0000000..c5fc83d
--- /dev/null
+++ b/nojobs.c
@@ -0,0 +1,1070 @@
+/* nojobs.c - functions that make children, remember them, and handle their termination. */
+
+/* This file works under BSD, System V, minix, and Posix systems.  It does
+   not implement job control. */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include "bashtypes.h"
+#include "filecntl.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include <signal.h>
+#include <errno.h>
+
+#if defined (BUFFERED_INPUT)
+#  include "input.h"
+#endif
+
+/* Need to include this up here for *_TTY_DRIVER definitions. */
+#include "shtty.h"
+
+#include "bashintl.h"
+
+#include "shell.h"
+#include "jobs.h"
+#include "execute_cmd.h"
+#include "trap.h"
+
+#include "builtins/builtext.h"	/* for wait_builtin */
+#include "builtins/common.h"
+
+#define DEFAULT_CHILD_MAX 4096
+
+#if defined (_POSIX_VERSION) || !defined (HAVE_KILLPG)
+#  define killpg(pg, sig)		kill(-(pg),(sig))
+#endif /* USG || _POSIX_VERSION */
+
+#if !defined (HAVE_SIGINTERRUPT) && !defined (HAVE_POSIX_SIGNALS)
+#  define siginterrupt(sig, code)
+#endif /* !HAVE_SIGINTERRUPT && !HAVE_POSIX_SIGNALS */
+
+#if defined (HAVE_WAITPID)
+#  define WAITPID(pid, statusp, options) waitpid (pid, statusp, options)
+#else
+#  define WAITPID(pid, statusp, options) wait (statusp)
+#endif /* !HAVE_WAITPID */
+
+/* Return the fd from which we are actually getting input. */
+#define input_tty() (shell_tty != -1) ? shell_tty : fileno (stderr)
+
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+extern void set_original_signal PARAMS((int, SigHandler *));
+
+volatile pid_t last_made_pid = NO_PID;
+volatile pid_t last_asynchronous_pid = NO_PID;
+
+static int queue_sigchld;		/* dummy declaration */
+int waiting_for_child;
+
+/* Call this when you start making children. */
+int already_making_children = 0;
+
+/* The controlling tty for this shell. */
+int shell_tty = -1;
+
+/* If this is non-zero, $LINES and $COLUMNS are reset after every process
+   exits from get_tty_state(). */
+int check_window_size = CHECKWINSIZE_DEFAULT;
+
+/* We don't have job control. */
+int job_control = 0;
+
+int running_in_background = 0;	/* can't tell without job control */
+
+/* STATUS and FLAGS are only valid if pid != NO_PID
+   STATUS is only valid if (flags & PROC_RUNNING) == 0 */
+struct proc_status {
+  pid_t pid;
+  int status;	/* Exit status of PID or 128 + fatal signal number */
+  int flags;
+};
+
+/* Values for proc_status.flags */
+#define PROC_RUNNING	0x01
+#define PROC_NOTIFIED	0x02
+#define PROC_ASYNC	0x04
+#define PROC_SIGNALED	0x10
+
+/* Return values from find_status_by_pid */
+#define PROC_BAD	 -1
+#define PROC_STILL_ALIVE -2
+
+static struct proc_status *pid_list = (struct proc_status *)NULL;
+static int pid_list_size;
+static int wait_sigint_received;
+
+static long child_max = -1L;
+
+static void alloc_pid_list PARAMS((void));
+static int find_proc_slot PARAMS((pid_t));
+static int find_index_by_pid PARAMS((pid_t));
+static int find_status_by_pid PARAMS((pid_t));
+static int process_exit_status PARAMS((WAIT));
+static int find_termsig_by_pid PARAMS((pid_t));
+static int get_termsig PARAMS((WAIT));
+static void set_pid_status PARAMS((pid_t, WAIT));
+static void set_pid_flags PARAMS((pid_t, int));
+static void unset_pid_flags PARAMS((pid_t, int));
+static int get_pid_flags PARAMS((pid_t));
+static void add_pid PARAMS((pid_t, int));
+static void mark_dead_jobs_as_notified PARAMS((int));
+
+static sighandler wait_sigint_handler PARAMS((int));
+static char *j_strsignal PARAMS((int));
+
+#if defined (HAVE_WAITPID)
+static void reap_zombie_children PARAMS((void));
+#endif
+
+#if !defined (HAVE_SIGINTERRUPT) && defined (HAVE_POSIX_SIGNALS)
+static int siginterrupt PARAMS((int, int));
+#endif
+
+static void restore_sigint_handler PARAMS((void));
+
+/* Allocate new, or grow existing PID_LIST. */
+static void
+alloc_pid_list ()
+{
+  register int i;
+  int old = pid_list_size;
+
+  pid_list_size += 10;
+  pid_list = (struct proc_status *)xrealloc (pid_list, pid_list_size * sizeof (struct proc_status));
+
+  /* None of the newly allocated slots have process id's yet. */
+  for (i = old; i < pid_list_size; i++)
+    {
+      pid_list[i].pid = NO_PID;
+      pid_list[i].status = pid_list[i].flags = 0;
+    }
+}
+
+/* Return the offset within the PID_LIST array of an empty slot.  This can
+   create new slots if all of the existing slots are taken. */
+static int
+find_proc_slot (pid)
+     pid_t pid;
+{
+  register int i;
+
+  for (i = 0; i < pid_list_size; i++)
+    if (pid_list[i].pid == NO_PID || pid_list[i].pid == pid)
+      return (i);
+
+  if (i == pid_list_size)
+    alloc_pid_list ();
+
+  return (i);
+}
+
+/* Return the offset within the PID_LIST array of a slot containing PID,
+   or the value NO_PID if the pid wasn't found. */
+static int
+find_index_by_pid (pid)
+     pid_t pid;
+{
+  register int i;
+
+  for (i = 0; i < pid_list_size; i++)
+    if (pid_list[i].pid == pid)
+      return (i);
+
+  return (NO_PID);
+}
+
+/* Return the status of PID as looked up in the PID_LIST array.  A
+   return value of PROC_BAD indicates that PID wasn't found. */
+static int
+find_status_by_pid (pid)
+     pid_t pid;
+{
+  int i;
+
+  i = find_index_by_pid (pid);
+  if (i == NO_PID)
+    return (PROC_BAD);
+  if (pid_list[i].flags & PROC_RUNNING)
+    return (PROC_STILL_ALIVE);
+  return (pid_list[i].status);
+}
+
+static int
+process_exit_status (status)
+     WAIT status;
+{
+  if (WIFSIGNALED (status))
+    return (128 + WTERMSIG (status));
+  else
+    return (WEXITSTATUS (status));
+}
+
+/* Return the status of PID as looked up in the PID_LIST array.  A
+   return value of PROC_BAD indicates that PID wasn't found. */
+static int
+find_termsig_by_pid (pid)
+     pid_t pid;
+{
+  int i;
+
+  i = find_index_by_pid (pid);
+  if (i == NO_PID)
+    return (0);
+  if (pid_list[i].flags & PROC_RUNNING)
+    return (0);
+  return (get_termsig ((WAIT)pid_list[i].status));
+}
+
+/* Set LAST_COMMAND_EXIT_SIGNAL depending on STATUS.  If STATUS is -1, look
+   up PID in the pid array and set LAST_COMMAND_EXIT_SIGNAL appropriately
+   depending on its flags and exit status. */
+static int
+get_termsig (status)
+     WAIT status;
+{
+  if (WIFSTOPPED (status) == 0 && WIFSIGNALED (status))
+    return (WTERMSIG (status));
+  else
+    return (0);
+}
+
+/* Give PID the status value STATUS in the PID_LIST array. */
+static void
+set_pid_status (pid, status)
+     pid_t pid;
+     WAIT status;
+{
+  int slot;
+
+#if defined (COPROCESS_SUPPORT)
+  coproc_pidchk (pid, status);
+#endif
+
+#if defined (PROCESS_SUBSTITUTION)
+  if ((slot = find_procsub_child (pid)) >= 0)
+    set_procsub_status (slot, pid, WSTATUS (status));
+    /* XXX - also saving in list below */
+#endif
+
+  slot = find_index_by_pid (pid);
+  if (slot == NO_PID)
+    return;
+
+  pid_list[slot].status = process_exit_status (status);
+  pid_list[slot].flags &= ~PROC_RUNNING;
+  if (WIFSIGNALED (status))
+    pid_list[slot].flags |= PROC_SIGNALED;
+  /* If it's not a background process, mark it as notified so it gets
+     cleaned up. */
+  if ((pid_list[slot].flags & PROC_ASYNC) == 0)
+    pid_list[slot].flags |= PROC_NOTIFIED;
+}
+
+/* Give PID the flags FLAGS in the PID_LIST array. */
+static void
+set_pid_flags (pid, flags)
+     pid_t pid;
+     int flags;
+{
+  int slot;
+
+  slot = find_index_by_pid (pid);
+  if (slot == NO_PID)
+    return;
+
+  pid_list[slot].flags |= flags;
+}
+
+/* Unset FLAGS for PID in the pid list */
+static void
+unset_pid_flags (pid, flags)
+     pid_t pid;
+     int flags;
+{
+  int slot;
+
+  slot = find_index_by_pid (pid);
+  if (slot == NO_PID)
+    return;
+
+  pid_list[slot].flags &= ~flags;
+}
+
+/* Return the flags corresponding to PID in the PID_LIST array. */
+static int
+get_pid_flags (pid)
+     pid_t pid;
+{
+  int slot;
+
+  slot = find_index_by_pid (pid);
+  if (slot == NO_PID)
+    return 0;
+
+  return (pid_list[slot].flags);
+}
+
+static void
+add_pid (pid, async)
+     pid_t pid;
+     int async;
+{
+  int slot;
+
+  slot = find_proc_slot (pid);
+
+  pid_list[slot].pid = pid;
+  pid_list[slot].status = -1;
+  pid_list[slot].flags = PROC_RUNNING;
+  if (async)
+    pid_list[slot].flags |= PROC_ASYNC;
+}
+
+static void
+mark_dead_jobs_as_notified (force)
+     int force;
+{
+  register int i, ndead;
+
+  /* first, count the number of non-running async jobs if FORCE == 0 */
+  for (i = ndead = 0; force == 0 && i < pid_list_size; i++)
+    {
+      if (pid_list[i].pid == NO_PID)
+	continue;
+      if (((pid_list[i].flags & PROC_RUNNING) == 0) &&
+	   (pid_list[i].flags & PROC_ASYNC))
+	ndead++;
+    }
+
+  if (child_max < 0)
+    child_max = getmaxchild ();
+  if (child_max < 0)
+    child_max = DEFAULT_CHILD_MAX;
+
+  if (force == 0 && ndead <= child_max)
+    return;
+
+  /* If FORCE == 0, we just mark as many non-running async jobs as notified
+     to bring us under the CHILD_MAX limit. */
+  for (i = 0; i < pid_list_size; i++)
+    {
+      if (pid_list[i].pid == NO_PID)
+	continue;
+      if (((pid_list[i].flags & PROC_RUNNING) == 0) &&
+	   pid_list[i].pid != last_asynchronous_pid)
+	{
+	  pid_list[i].flags |= PROC_NOTIFIED;
+	  if (force == 0 && (pid_list[i].flags & PROC_ASYNC) && --ndead <= child_max)
+	    break;
+	}
+    }
+}
+
+/* Remove all dead, notified jobs from the pid_list. */
+int
+cleanup_dead_jobs ()
+{
+  register int i;
+
+#if defined (HAVE_WAITPID)
+  reap_zombie_children ();
+#endif
+
+  for (i = 0; i < pid_list_size; i++)
+    {
+      if (pid_list[i].pid != NO_PID &&
+	    (pid_list[i].flags & PROC_RUNNING) == 0 &&
+	    (pid_list[i].flags & PROC_NOTIFIED))
+	pid_list[i].pid = NO_PID;
+    }
+
+#if defined (COPROCESS_SUPPORT)
+  coproc_reap ();
+#endif
+
+  return 0;
+}
+
+void
+reap_dead_jobs ()
+{
+  mark_dead_jobs_as_notified (0);
+  cleanup_dead_jobs ();
+}
+
+/* Initialize the job control mechanism, and set up the tty stuff. */
+int
+initialize_job_control (force)
+     int force;
+{
+  shell_tty = fileno (stderr);
+
+  if (interactive)
+    get_tty_state ();
+  return 0;
+}
+
+/* Setup this shell to handle C-C, etc. */
+void
+initialize_job_signals ()
+{
+  set_signal_handler (SIGINT, sigint_sighandler);
+
+  /* If this is a login shell we don't wish to be disturbed by
+     stop signals. */
+  if (login_shell)
+    ignore_tty_job_signals ();
+}
+
+#if defined (HAVE_WAITPID)
+/* Collect the status of all zombie children so that their system
+   resources can be deallocated. */
+static void
+reap_zombie_children ()
+{
+#  if defined (WNOHANG)
+  pid_t pid;
+  WAIT status;
+
+  CHECK_TERMSIG;
+  CHECK_WAIT_INTR;
+  while ((pid = waitpid (-1, (int *)&status, WNOHANG)) > 0)
+    set_pid_status (pid, status);
+#  endif /* WNOHANG */
+  CHECK_TERMSIG;
+  CHECK_WAIT_INTR;
+}
+#endif /* WAITPID */
+
+#if !defined (HAVE_SIGINTERRUPT) && defined (HAVE_POSIX_SIGNALS)
+
+#if !defined (SA_RESTART)
+#  define SA_RESTART 0
+#endif
+
+static int
+siginterrupt (sig, flag)
+     int sig, flag;
+{
+  struct sigaction act;
+
+  sigaction (sig, (struct sigaction *)NULL, &act);
+
+  if (flag)
+    act.sa_flags &= ~SA_RESTART;
+  else
+    act.sa_flags |= SA_RESTART;
+
+  return (sigaction (sig, &act, (struct sigaction *)NULL));
+}
+#endif /* !HAVE_SIGINTERRUPT && HAVE_POSIX_SIGNALS */
+
+/* Fork, handling errors.  Returns the pid of the newly made child, or 0.
+   COMMAND is just for remembering the name of the command; we don't do
+   anything else with it.  ASYNC_P says what to do with the tty.  If
+   non-zero, then don't give it away. */
+pid_t
+make_child (command, flags)
+     char *command;
+     int flags;
+{
+  pid_t pid;
+  int async_p, forksleep;
+  sigset_t set, oset;
+
+  /* Discard saved memory. */
+  if (command)
+    free (command);
+
+  async_p = (flags & FORK_ASYNC);
+  start_pipeline ();
+
+#if defined (BUFFERED_INPUT)
+  /* If default_buffered_input is active, we are reading a script.  If
+     the command is asynchronous, we have already duplicated /dev/null
+     as fd 0, but have not changed the buffered stream corresponding to
+     the old fd 0.  We don't want to sync the stream in this case. */
+  if (default_buffered_input != -1 && (!async_p || default_buffered_input > 0))
+    sync_buffered_stream (default_buffered_input);
+#endif /* BUFFERED_INPUT */
+
+  /* Block SIGTERM here and unblock in child after fork resets the
+     set of pending signals */
+  if (interactive_shell)
+    {
+      sigemptyset (&set);
+      sigaddset (&set, SIGTERM);
+      sigemptyset (&oset);
+      sigprocmask (SIG_BLOCK, &set, &oset);
+      set_signal_handler (SIGTERM, SIG_DFL);
+    }
+
+  /* Create the child, handle severe errors.  Retry on EAGAIN. */
+  forksleep = 1;
+  while ((pid = fork ()) < 0 && errno == EAGAIN && forksleep < FORKSLEEP_MAX)
+    {
+      sys_error ("fork: retry");
+
+#if defined (HAVE_WAITPID)
+      /* Posix systems with a non-blocking waitpid () system call available
+	 get another chance after zombies are reaped. */
+      reap_zombie_children ();
+      if (forksleep > 1 && sleep (forksleep) != 0)
+        break;
+#else
+      if (sleep (forksleep) != 0)
+	break;
+#endif /* HAVE_WAITPID */
+      forksleep <<= 1;
+    }
+
+  if (pid != 0)
+    if (interactive_shell)
+      {
+	set_signal_handler (SIGTERM, SIG_IGN);
+	sigprocmask (SIG_SETMASK, &oset, (sigset_t *)NULL);
+      }
+
+  if (pid < 0)
+    {
+      sys_error ("fork");
+      last_command_exit_value = EX_NOEXEC;
+      throw_to_top_level ();
+    }
+
+  if (pid == 0)
+    {
+#if defined (BUFFERED_INPUT)
+      unset_bash_input (0);
+#endif /* BUFFERED_INPUT */
+
+      CLRINTERRUPT;	/* XXX - children have their own interrupt state */
+
+      /* Restore top-level signal mask. */
+      restore_sigmask ();
+
+#if 0
+      /* Ignore INT and QUIT in asynchronous children. */
+      if (async_p)
+	last_asynchronous_pid = getpid ();
+#endif
+
+      default_tty_job_signals ();
+    }
+  else
+    {
+      /* In the parent. */
+
+      last_made_pid = pid;
+
+      if (async_p)
+	last_asynchronous_pid = pid;
+
+      add_pid (pid, async_p);
+    }
+  return (pid);
+}
+
+void
+ignore_tty_job_signals ()
+{
+#if defined (SIGTSTP)
+  set_signal_handler (SIGTSTP, SIG_IGN);
+  set_signal_handler (SIGTTIN, SIG_IGN);
+  set_signal_handler (SIGTTOU, SIG_IGN);
+#endif
+}
+
+void
+default_tty_job_signals ()
+{
+#if defined (SIGTSTP)
+  if (signal_is_trapped (SIGTSTP) == 0 && signal_is_hard_ignored (SIGTSTP))
+    set_signal_handler (SIGTSTP, SIG_IGN);
+  else
+    set_signal_handler (SIGTSTP, SIG_DFL);
+  if (signal_is_trapped (SIGTTIN) == 0 && signal_is_hard_ignored (SIGTTIN))
+    set_signal_handler (SIGTTIN, SIG_IGN);
+  else
+    set_signal_handler (SIGTTIN, SIG_DFL);
+  if (signal_is_trapped (SIGTTOU) == 0 && signal_is_hard_ignored (SIGTTOU))
+    set_signal_handler (SIGTTOU, SIG_IGN);
+  else
+    set_signal_handler (SIGTTOU, SIG_DFL);
+#endif
+}
+
+/* Called once in a parent process. */
+void
+get_original_tty_job_signals ()
+{
+  static int fetched = 0;
+
+  if (fetched == 0)
+    {
+#if defined (SIGTSTP)
+      if (interactive_shell)
+	{
+	  set_original_signal (SIGTSTP, SIG_DFL);
+	  set_original_signal (SIGTTIN, SIG_DFL);
+	  set_original_signal (SIGTTOU, SIG_DFL);
+	}
+      else
+	{
+	  get_original_signal (SIGTSTP);
+	  get_original_signal (SIGTTIN);
+	  get_original_signal (SIGTTOU);
+	}
+#endif
+      fetched = 1;
+    }
+}
+
+/* Wait for a single pid (PID) and return its exit status.  Called by
+   the wait builtin. */
+int
+wait_for_single_pid (pid, flags)
+     pid_t pid;
+     int flags;
+{
+  pid_t got_pid;
+  WAIT status;
+  int pstatus;
+
+  pstatus = find_status_by_pid (pid);
+
+  if (pstatus == PROC_BAD)
+    {
+      internal_error (_("wait: pid %ld is not a child of this shell"), (long)pid);
+      return (127);
+    }
+
+  if (pstatus != PROC_STILL_ALIVE)
+    {
+      if (pstatus > 128)
+	last_command_exit_signal = find_termsig_by_pid (pid);
+      return (pstatus);
+    }
+
+  siginterrupt (SIGINT, 1);
+  while ((got_pid = WAITPID (pid, &status, 0)) != pid)
+    {
+      CHECK_TERMSIG;
+      CHECK_WAIT_INTR;
+      if (got_pid < 0)
+	{
+	  if (errno != EINTR && errno != ECHILD)
+	    {
+	      siginterrupt (SIGINT, 0);
+	      sys_error ("wait");
+	    }
+	  break;
+	}
+      else if (got_pid > 0)
+	set_pid_status (got_pid, status);
+    }
+
+  if (got_pid > 0)
+    {
+      set_pid_status (got_pid, status);
+      set_pid_flags (got_pid, PROC_NOTIFIED);
+    }
+
+  siginterrupt (SIGINT, 0);
+  QUIT;
+  CHECK_WAIT_INTR;
+
+  return (got_pid > 0 ? process_exit_status (status) : -1);
+}
+
+/* Wait for all of the shell's children to exit.  Called by the `wait'
+   builtin. */
+void
+wait_for_background_pids (ps)
+     struct procstat *ps;
+{
+  pid_t got_pid;
+  WAIT status;
+
+  /* If we aren't using job control, we let the kernel take care of the
+     bookkeeping for us.  wait () will return -1 and set errno to ECHILD
+     when there are no more unwaited-for child processes on both
+     4.2 BSD-based and System V-based systems. */
+
+  siginterrupt (SIGINT, 1);
+
+  /* Wait for ECHILD */
+  waiting_for_child = 1;
+  while ((got_pid = WAITPID (-1, &status, 0)) != -1)
+    {
+      waiting_for_child = 0;
+      set_pid_status (got_pid, status);
+      if (ps)
+	{
+	  ps->pid = got_pid;
+	  ps->status = process_exit_status (status);
+	}
+      waiting_for_child = 1;
+      CHECK_WAIT_INTR;
+    }
+  waiting_for_child = 0;
+
+  if (errno != EINTR && errno != ECHILD)
+    {
+      siginterrupt (SIGINT, 0);
+      sys_error("wait");
+    }
+
+  siginterrupt (SIGINT, 0);
+  QUIT;
+  CHECK_WAIT_INTR;
+
+  mark_dead_jobs_as_notified (1);
+  cleanup_dead_jobs ();
+}
+
+void
+wait_sigint_cleanup ()
+{
+}
+
+/* Make OLD_SIGINT_HANDLER the SIGINT signal handler. */
+#define INVALID_SIGNAL_HANDLER (SigHandler *)wait_for_background_pids
+static SigHandler *old_sigint_handler = INVALID_SIGNAL_HANDLER;
+
+static void
+restore_sigint_handler ()
+{
+  if (old_sigint_handler != INVALID_SIGNAL_HANDLER)
+    {
+      set_signal_handler (SIGINT, old_sigint_handler);
+      old_sigint_handler = INVALID_SIGNAL_HANDLER;
+    }
+}
+
+/* Handle SIGINT while we are waiting for children in a script to exit.
+   All interrupts are effectively ignored by the shell, but allowed to
+   kill a running job. */
+static sighandler
+wait_sigint_handler (sig)
+     int sig;
+{
+  SigHandler *sigint_handler;
+
+  /* If we got a SIGINT while in `wait', and SIGINT is trapped, do
+     what POSIX.2 says (see builtins/wait.def for more info). */
+  if (this_shell_builtin && this_shell_builtin == wait_builtin &&
+      signal_is_trapped (SIGINT) &&
+      ((sigint_handler = trap_to_sighandler (SIGINT)) == trap_handler))
+    {
+      last_command_exit_value = 128+SIGINT;
+      restore_sigint_handler ();
+      trap_handler (SIGINT);	/* set pending_traps[SIGINT] */
+      wait_signal_received = SIGINT;
+      SIGRETURN (0);
+    }
+
+  wait_sigint_received = 1;
+
+  SIGRETURN (0);
+}
+
+static char *
+j_strsignal (s)
+     int s;
+{
+  static char retcode_name_buffer[64] = { '\0' };
+  char *x;
+
+  x = strsignal (s);
+  if (x == 0)
+    {
+      x = retcode_name_buffer;
+      sprintf (x, "Signal %d", s);
+    }
+  return x;
+}
+
+/* Wait for pid (one of our children) to terminate.  This is called only
+   by the execution code in execute_cmd.c. */
+int
+wait_for (pid, flags)
+     pid_t pid;
+     int flags;
+{
+  int return_val, pstatus;
+  pid_t got_pid;
+  WAIT status;
+
+  pstatus = find_status_by_pid (pid);
+
+  if (pstatus == PROC_BAD)
+    return (0);
+
+  if (pstatus != PROC_STILL_ALIVE)
+    {
+      if (pstatus > 128)
+	last_command_exit_signal = find_termsig_by_pid (pid);
+      return (pstatus);
+    }
+
+  /* If we are running a script, ignore SIGINT while we're waiting for
+     a child to exit.  The loop below does some of this, but not all. */
+  wait_sigint_received = 0;
+  if (interactive_shell == 0)
+    old_sigint_handler = set_signal_handler (SIGINT, wait_sigint_handler);
+
+  waiting_for_child = 1;  
+  CHECK_WAIT_INTR;
+  while ((got_pid = WAITPID (-1, &status, 0)) != pid) /* XXX was pid now -1 */
+    {
+      waiting_for_child = 0;
+      CHECK_TERMSIG;
+      CHECK_WAIT_INTR;
+      if (got_pid < 0 && errno == ECHILD)
+	{
+#if !defined (_POSIX_VERSION)
+	  status.w_termsig = status.w_retcode = 0;
+#else
+	  status = 0;
+#endif /* _POSIX_VERSION */
+	  break;
+	}
+      else if (got_pid < 0 && errno != EINTR)
+	programming_error ("wait_for(%ld): %s", (long)pid, strerror(errno));
+      else if (got_pid > 0)
+	set_pid_status (got_pid, status);
+      waiting_for_child = 1;
+    }
+  waiting_for_child = 0;
+
+  if (got_pid > 0)
+    set_pid_status (got_pid, status);
+
+#if defined (HAVE_WAITPID)
+  if (got_pid >= 0)
+    reap_zombie_children ();
+#endif /* HAVE_WAITPID */
+
+  CHECK_TERMSIG;
+  CHECK_WAIT_INTR;
+
+  if (interactive_shell == 0)
+    {
+      SigHandler *temp_handler;
+
+      temp_handler = old_sigint_handler;
+      restore_sigint_handler ();
+
+      /* If the job exited because of SIGINT, make sure the shell acts as if
+	 it had received one also. */
+      if (WIFSIGNALED (status) && (WTERMSIG (status) == SIGINT))
+	{
+
+	  if (maybe_call_trap_handler (SIGINT) == 0)
+	    {
+	      if (temp_handler == SIG_DFL)
+		termsig_handler (SIGINT);
+	      else if (temp_handler != INVALID_SIGNAL_HANDLER && temp_handler != SIG_IGN)
+		(*temp_handler) (SIGINT);
+	    }
+	}
+    }
+
+  /* Default return value. */
+  /* ``a full 8 bits of status is returned'' */
+  return_val = process_exit_status (status);
+  last_command_exit_signal = get_termsig (status);
+
+#if defined (DONT_REPORT_SIGPIPE) && defined (DONT_REPORT_SIGTERM)
+#  define REPORTSIG(x) ((x) != SIGINT && (x) != SIGPIPE && (x) != SIGTERM)
+#elif !defined (DONT_REPORT_SIGPIPE) && !defined (DONT_REPORT_SIGTERM)
+#  define REPORTSIG(x) ((x) != SIGINT)
+#elif defined (DONT_REPORT_SIGPIPE)
+#  define REPORTSIG(x) ((x) != SIGINT && (x) != SIGPIPE)
+#else
+#  define REPORTSIG(x) ((x) != SIGINT && (x) != SIGTERM)
+#endif
+
+  if ((WIFSTOPPED (status) == 0) && WIFSIGNALED (status) && REPORTSIG(WTERMSIG (status)))
+    {
+      fprintf (stderr, "%s", j_strsignal (WTERMSIG (status)));
+      if (WIFCORED (status))
+	fprintf (stderr, _(" (core dumped)"));
+      fprintf (stderr, "\n");
+    }
+
+  if (interactive_shell && subshell_environment == 0)
+    {
+      if (WIFSIGNALED (status) || WIFSTOPPED (status))
+	set_tty_state ();
+      else
+	get_tty_state ();
+    }
+  else if (interactive_shell == 0 && subshell_environment == 0 && check_window_size)
+    get_new_window_size (0, (int *)0, (int *)0);
+
+  return (return_val);
+}
+
+/* Send PID SIGNAL.  Returns -1 on failure, 0 on success.  If GROUP is non-zero,
+   or PID is less than -1, then kill the process group associated with PID. */
+int
+kill_pid (pid, signal, group)
+     pid_t pid;
+     int signal, group;
+{
+  int result;
+
+  if (pid < -1)
+    {
+      pid = -pid;
+      group = 1;
+    }
+  result = group ? killpg (pid, signal) : kill (pid, signal);
+  return (result);
+}
+
+static TTYSTRUCT shell_tty_info;
+static int got_tty_state;
+
+/* Fill the contents of shell_tty_info with the current tty info. */
+int
+get_tty_state ()
+{
+  int tty;
+
+  tty = input_tty ();
+  if (tty != -1)
+    {
+      ttgetattr (tty, &shell_tty_info);
+      got_tty_state = 1;
+      if (check_window_size)
+	get_new_window_size (0, (int *)0, (int *)0);
+    }
+  return 0;
+}
+
+/* Make the current tty use the state in shell_tty_info. */
+int
+set_tty_state ()
+{
+  int tty;
+
+  tty = input_tty ();
+  if (tty != -1)
+    {
+      if (got_tty_state == 0)
+	return 0;
+      ttsetattr (tty, &shell_tty_info);
+    }
+  return 0;
+}
+
+/* Give the terminal to PGRP.  */
+int
+give_terminal_to (pgrp, force)
+     pid_t pgrp;
+     int force;
+{
+  return 0;
+}
+
+/* Stop a pipeline. */
+int
+stop_pipeline (async, ignore)
+     int async;
+     COMMAND *ignore;
+{
+  already_making_children = 0;
+  return 0;
+}
+
+void
+start_pipeline ()
+{
+  already_making_children = 1;
+}
+
+void
+stop_making_children ()
+{
+  already_making_children = 0;
+}
+
+/* The name is kind of a misnomer, but it's what the job control code uses. */
+void
+without_job_control ()
+{
+  stop_making_children ();
+  last_made_pid = NO_PID;	/* XXX */
+}
+
+int
+get_job_by_pid (pid, block, ignore)
+     pid_t pid;
+     int block;
+     PROCESS **ignore;
+{
+  int i;
+
+  i = find_index_by_pid (pid);
+  return ((i == NO_PID) ? PROC_BAD : i);
+}
+
+/* Print descriptive information about the job with leader pid PID. */
+void
+describe_pid (pid)
+     pid_t pid;
+{
+  fprintf (stderr, "%ld\n", (long) pid);
+}
+
+int
+freeze_jobs_list ()
+{
+  return 0;
+}
+
+void
+unfreeze_jobs_list ()
+{
+}
+
+void
+set_jobs_list_frozen (s)
+     int s;
+{
+}
+
+int
+count_all_jobs ()
+{
+  return 0;
+}
diff --git a/parse.y b/parse.y
new file mode 100644
index 0000000..df1231d
--- /dev/null
+++ b/parse.y
@@ -0,0 +1,6919 @@
+/* parse.y - Yacc grammar for bash. */
+
+/* Copyright (C) 1989-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+%{
+#include "config.h"
+
+#include "bashtypes.h"
+#include "bashansi.h"
+
+#include "filecntl.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#if defined (HAVE_LOCALE_H)
+#  include <locale.h>
+#endif
+
+#include <stdio.h>
+#include "chartypes.h"
+#include <signal.h>
+
+#include "memalloc.h"
+
+#include "bashintl.h"
+
+#define NEED_STRFTIME_DECL	/* used in externs.h */
+
+#include "shell.h"
+#include "execute_cmd.h"
+#include "typemax.h"		/* SIZE_MAX if needed */
+#include "trap.h"
+#include "flags.h"
+#include "parser.h"
+#include "mailcheck.h"
+#include "test.h"
+#include "builtins.h"
+#include "builtins/common.h"
+#include "builtins/builtext.h"
+
+#include "shmbutil.h"
+
+#if defined (READLINE)
+#  include "bashline.h"
+#  include <readline/readline.h>
+#endif /* READLINE */
+
+#if defined (HISTORY)
+#  include "bashhist.h"
+#  include <readline/history.h>
+#endif /* HISTORY */
+
+#if defined (JOB_CONTROL)
+#  include "jobs.h"
+#else
+extern int cleanup_dead_jobs PARAMS((void));
+#endif /* JOB_CONTROL */
+
+#if defined (ALIAS)
+#  include "alias.h"
+#else
+typedef void *alias_t;
+#endif /* ALIAS */
+
+#if defined (PROMPT_STRING_DECODE)
+#  ifndef _MINIX
+#    include <sys/param.h>
+#  endif
+#  include <time.h>
+#  if defined (TM_IN_SYS_TIME)
+#    include <sys/types.h>
+#    include <sys/time.h>
+#  endif /* TM_IN_SYS_TIME */
+#  include "maxpath.h"
+#endif /* PROMPT_STRING_DECODE */
+
+#define RE_READ_TOKEN	-99
+#define NO_EXPANSION	-100
+
+#define END_ALIAS	-2
+
+#ifdef DEBUG
+#  define YYDEBUG 1
+#else
+#  define YYDEBUG 0
+#endif
+
+#if defined (HANDLE_MULTIBYTE)
+#  define last_shell_getc_is_singlebyte \
+	((shell_input_line_index > 1) \
+		? shell_input_line_property[shell_input_line_index - 1] \
+		: 1)
+#  define MBTEST(x)	((x) && last_shell_getc_is_singlebyte)
+#else
+#  define last_shell_getc_is_singlebyte	1
+#  define MBTEST(x)	((x))
+#endif
+
+#if defined (EXTENDED_GLOB)
+extern int extended_glob;
+#endif
+
+extern int dump_translatable_strings, dump_po_strings;
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+/* **************************************************************** */
+/*								    */
+/*		    "Forward" declarations			    */
+/*								    */
+/* **************************************************************** */
+
+#ifdef DEBUG
+static void debug_parser PARAMS((int));
+#endif
+
+static int yy_getc PARAMS((void));
+static int yy_ungetc PARAMS((int));
+
+#if defined (READLINE)
+static int yy_readline_get PARAMS((void));
+static int yy_readline_unget PARAMS((int));
+#endif
+
+static int yy_string_get PARAMS((void));
+static int yy_string_unget PARAMS((int));
+static void rewind_input_string PARAMS((void));
+static int yy_stream_get PARAMS((void));
+static int yy_stream_unget PARAMS((int));
+
+static int shell_getc PARAMS((int));
+static void shell_ungetc PARAMS((int));
+static void discard_until PARAMS((int));
+
+#if defined (ALIAS) || defined (DPAREN_ARITHMETIC)
+static void push_string PARAMS((char *, int, alias_t *));
+static void pop_string PARAMS((void));
+static void free_string_list PARAMS((void));
+#endif
+
+static char *read_a_line PARAMS((int));
+
+static int reserved_word_acceptable PARAMS((int));
+static int yylex PARAMS((void));
+
+static void push_heredoc PARAMS((REDIRECT *));
+static char *mk_alexpansion PARAMS((char *));
+static int alias_expand_token PARAMS((char *));
+static int time_command_acceptable PARAMS((void));
+static int special_case_tokens PARAMS((char *));
+static int read_token PARAMS((int));
+static char *parse_matched_pair PARAMS((int, int, int, int *, int));
+static char *parse_comsub PARAMS((int, int, int, int *, int));
+#if defined (ARRAY_VARS)
+static char *parse_compound_assignment PARAMS((int *));
+#endif
+#if defined (DPAREN_ARITHMETIC) || defined (ARITH_FOR_COMMAND)
+static int parse_dparen PARAMS((int));
+static int parse_arith_cmd PARAMS((char **, int));
+#endif
+#if defined (COND_COMMAND)
+static void cond_error PARAMS((void));
+static COND_COM *cond_expr PARAMS((void));
+static COND_COM *cond_or PARAMS((void));
+static COND_COM *cond_and PARAMS((void));
+static COND_COM *cond_term PARAMS((void));
+static int cond_skip_newlines PARAMS((void));
+static COMMAND *parse_cond_command PARAMS((void));
+#endif
+#if defined (ARRAY_VARS)
+static int token_is_assignment PARAMS((char *, int));
+static int token_is_ident PARAMS((char *, int));
+#endif
+static int read_token_word PARAMS((int));
+static void discard_parser_constructs PARAMS((int));
+
+static char *error_token_from_token PARAMS((int));
+static char *error_token_from_text PARAMS((void));
+static void print_offending_line PARAMS((void));
+static void report_syntax_error PARAMS((char *));
+
+static void handle_eof_input_unit PARAMS((void));
+static void prompt_again PARAMS((void));
+#if 0
+static void reset_readline_prompt PARAMS((void));
+#endif
+static void print_prompt PARAMS((void));
+
+#if defined (HANDLE_MULTIBYTE)
+static void set_line_mbstate PARAMS((void));
+static char *shell_input_line_property = NULL;
+static size_t shell_input_line_propsize = 0;
+#else
+#  define set_line_mbstate()
+#endif
+
+extern int yyerror PARAMS((const char *));
+
+#ifdef DEBUG
+extern int yydebug;
+#endif
+
+/* Default prompt strings */
+char *primary_prompt = PPROMPT;
+char *secondary_prompt = SPROMPT;
+
+/* PROMPT_STRING_POINTER points to one of these, never to an actual string. */
+char *ps1_prompt, *ps2_prompt;
+
+/* Displayed after reading a command but before executing it in an interactive shell */
+char *ps0_prompt;
+
+/* Handle on the current prompt string.  Indirectly points through
+   ps1_ or ps2_prompt. */
+char **prompt_string_pointer = (char **)NULL;
+char *current_prompt_string;
+
+/* Non-zero means we expand aliases in commands. */
+int expand_aliases = 0;
+
+/* If non-zero, the decoded prompt string undergoes parameter and
+   variable substitution, command substitution, arithmetic substitution,
+   string expansion, process substitution, and quote removal in
+   decode_prompt_string. */
+int promptvars = 1;
+
+/* If non-zero, $'...' and $"..." are expanded when they appear within
+   a ${...} expansion, even when the expansion appears within double
+   quotes. */
+int extended_quote = 1;
+
+/* The number of lines read from input while creating the current command. */
+int current_command_line_count;
+
+/* The number of lines in a command saved while we run parse_and_execute */
+int saved_command_line_count;
+
+/* The token that currently denotes the end of parse. */
+int shell_eof_token;
+
+/* The token currently being read. */
+int current_token;
+
+/* The current parser state. */
+int parser_state;
+
+/* Variables to manage the task of reading here documents, because we need to
+   defer the reading until after a complete command has been collected. */
+static REDIRECT *redir_stack[HEREDOC_MAX];
+int need_here_doc;
+
+/* Where shell input comes from.  History expansion is performed on each
+   line when the shell is interactive. */
+static char *shell_input_line = (char *)NULL;
+static size_t shell_input_line_index;
+static size_t shell_input_line_size;	/* Amount allocated for shell_input_line. */
+static size_t shell_input_line_len;	/* strlen (shell_input_line) */
+
+/* Either zero or EOF. */
+static int shell_input_line_terminator;
+
+/* The line number in a script on which a function definition starts. */
+static int function_dstart;
+
+/* The line number in a script on which a function body starts. */
+static int function_bstart;
+
+/* The line number in a script at which an arithmetic for command starts. */
+static int arith_for_lineno;
+
+/* The decoded prompt string.  Used if READLINE is not defined or if
+   editing is turned off.  Analogous to current_readline_prompt. */
+static char *current_decoded_prompt;
+
+/* The last read token, or NULL.  read_token () uses this for context
+   checking. */
+static int last_read_token;
+
+/* The token read prior to last_read_token. */
+static int token_before_that;
+
+/* The token read prior to token_before_that. */
+static int two_tokens_ago;
+
+static int global_extglob;
+
+/* The line number in a script where the word in a `case WORD', `select WORD'
+   or `for WORD' begins.  This is a nested command maximum, since the array
+   index is decremented after a case, select, or for command is parsed. */
+#define MAX_CASE_NEST	128
+static int word_lineno[MAX_CASE_NEST+1];
+static int word_top = -1;
+
+/* If non-zero, it is the token that we want read_token to return
+   regardless of what text is (or isn't) present to be read.  This
+   is reset by read_token.  If token_to_read == WORD or
+   ASSIGNMENT_WORD, yylval.word should be set to word_desc_to_read. */
+static int token_to_read;
+static WORD_DESC *word_desc_to_read;
+
+static REDIRECTEE source;
+static REDIRECTEE redir;
+
+static FILE *yyoutstream;
+static FILE *yyerrstream;
+%}
+
+%union {
+  WORD_DESC *word;		/* the word that we read. */
+  int number;			/* the number that we read. */
+  WORD_LIST *word_list;
+  COMMAND *command;
+  REDIRECT *redirect;
+  ELEMENT element;
+  PATTERN_LIST *pattern;
+}
+
+/* Reserved words.  Members of the first group are only recognized
+   in the case that they are preceded by a list_terminator.  Members
+   of the second group are for [[...]] commands.  Members of the
+   third group are recognized only under special circumstances. */
+%token IF THEN ELSE ELIF FI CASE ESAC FOR SELECT WHILE UNTIL DO DONE FUNCTION COPROC
+%token COND_START COND_END COND_ERROR
+%token IN BANG TIME TIMEOPT TIMEIGN
+
+/* More general tokens. yylex () knows how to make these. */
+%token <word> WORD ASSIGNMENT_WORD REDIR_WORD
+%token <number> NUMBER
+%token <word_list> ARITH_CMD ARITH_FOR_EXPRS
+%token <command> COND_CMD
+%token AND_AND OR_OR GREATER_GREATER LESS_LESS LESS_AND LESS_LESS_LESS
+%token GREATER_AND SEMI_SEMI SEMI_AND SEMI_SEMI_AND
+%token LESS_LESS_MINUS AND_GREATER AND_GREATER_GREATER LESS_GREATER
+%token GREATER_BAR BAR_AND
+
+/* The types that the various syntactical units return. */
+
+%type <command> inputunit command pipeline pipeline_command
+%type <command> list list0 list1 compound_list simple_list simple_list1
+%type <command> simple_command shell_command
+%type <command> for_command select_command case_command group_command
+%type <command> arith_command
+%type <command> cond_command
+%type <command> arith_for_command
+%type <command> coproc
+%type <command> function_def function_body if_command elif_clause subshell
+%type <redirect> redirection redirection_list
+%type <element> simple_command_element
+%type <word_list> word_list pattern
+%type <pattern> pattern_list case_clause_sequence case_clause
+%type <number> timespec
+%type <number> list_terminator
+
+%start inputunit
+
+%left '&' ';' '\n' yacc_EOF
+%left AND_AND OR_OR
+%right '|' BAR_AND
+%%
+
+inputunit:	simple_list simple_list_terminator
+			{
+			  /* Case of regular command.  Discard the error
+			     safety net,and return the command just parsed. */
+			  global_command = $1;
+			  eof_encountered = 0;
+			  /* discard_parser_constructs (0); */
+			  if (parser_state & PST_CMDSUBST)
+			    parser_state |= PST_EOFTOKEN;
+			  YYACCEPT;
+			}
+	|	'\n'
+			{
+			  /* Case of regular command, but not a very
+			     interesting one.  Return a NULL command. */
+			  global_command = (COMMAND *)NULL;
+			  if (parser_state & PST_CMDSUBST)
+			    parser_state |= PST_EOFTOKEN;
+			  YYACCEPT;
+			}
+	|	error '\n'
+			{
+			  /* Error during parsing.  Return NULL command. */
+			  global_command = (COMMAND *)NULL;
+			  eof_encountered = 0;
+			  /* discard_parser_constructs (1); */
+			  if (interactive && parse_and_execute_level == 0)
+			    {
+			      YYACCEPT;
+			    }
+			  else
+			    {
+			      YYABORT;
+			    }
+			}
+	|	error yacc_EOF
+			{
+			  /* EOF after an error.  Do ignoreeof or not.  Really
+			     only interesting in non-interactive shells */
+			  global_command = (COMMAND *)NULL;
+			  if (last_command_exit_value == 0)
+			    last_command_exit_value = EX_BADUSAGE;	/* force error return */
+			  if (interactive && parse_and_execute_level == 0)
+			    {
+			      handle_eof_input_unit ();
+			      YYACCEPT;
+			    }
+			  else
+			    {
+			      YYABORT;
+			    }
+			}
+	|	yacc_EOF
+			{
+			  /* Case of EOF seen by itself.  Do ignoreeof or
+			     not. */
+			  global_command = (COMMAND *)NULL;
+			  handle_eof_input_unit ();
+			  YYACCEPT;
+			}
+	;
+
+word_list:	WORD
+			{ $$ = make_word_list ($1, (WORD_LIST *)NULL); }
+	|	word_list WORD
+			{ $$ = make_word_list ($2, $1); }
+	;
+
+redirection:	'>' WORD
+			{
+			  source.dest = 1;
+			  redir.filename = $2;
+			  $$ = make_redirection (source, r_output_direction, redir, 0);
+			}
+	|	'<' WORD
+			{
+			  source.dest = 0;
+			  redir.filename = $2;
+			  $$ = make_redirection (source, r_input_direction, redir, 0);
+			}
+	|	NUMBER '>' WORD
+			{
+			  source.dest = $1;
+			  redir.filename = $3;
+			  $$ = make_redirection (source, r_output_direction, redir, 0);
+			}
+	|	NUMBER '<' WORD
+			{
+			  source.dest = $1;
+			  redir.filename = $3;
+			  $$ = make_redirection (source, r_input_direction, redir, 0);
+			}
+	|	REDIR_WORD '>' WORD
+			{
+			  source.filename = $1;
+			  redir.filename = $3;
+			  $$ = make_redirection (source, r_output_direction, redir, REDIR_VARASSIGN);
+			}
+	|	REDIR_WORD '<' WORD
+			{
+			  source.filename = $1;
+			  redir.filename = $3;
+			  $$ = make_redirection (source, r_input_direction, redir, REDIR_VARASSIGN);
+			}
+	|	GREATER_GREATER WORD
+			{
+			  source.dest = 1;
+			  redir.filename = $2;
+			  $$ = make_redirection (source, r_appending_to, redir, 0);
+			}
+	|	NUMBER GREATER_GREATER WORD
+			{
+			  source.dest = $1;
+			  redir.filename = $3;
+			  $$ = make_redirection (source, r_appending_to, redir, 0);
+			}
+	|	REDIR_WORD GREATER_GREATER WORD
+			{
+			  source.filename = $1;
+			  redir.filename = $3;
+			  $$ = make_redirection (source, r_appending_to, redir, REDIR_VARASSIGN);
+			}
+	|	GREATER_BAR WORD
+			{
+			  source.dest = 1;
+			  redir.filename = $2;
+			  $$ = make_redirection (source, r_output_force, redir, 0);
+			}
+	|	NUMBER GREATER_BAR WORD
+			{
+			  source.dest = $1;
+			  redir.filename = $3;
+			  $$ = make_redirection (source, r_output_force, redir, 0);
+			}
+	|	REDIR_WORD GREATER_BAR WORD
+			{
+			  source.filename = $1;
+			  redir.filename = $3;
+			  $$ = make_redirection (source, r_output_force, redir, REDIR_VARASSIGN);
+			}
+	|	LESS_GREATER WORD
+			{
+			  source.dest = 0;
+			  redir.filename = $2;
+			  $$ = make_redirection (source, r_input_output, redir, 0);
+			}
+	|	NUMBER LESS_GREATER WORD
+			{
+			  source.dest = $1;
+			  redir.filename = $3;
+			  $$ = make_redirection (source, r_input_output, redir, 0);
+			}
+	|	REDIR_WORD LESS_GREATER WORD
+			{
+			  source.filename = $1;
+			  redir.filename = $3;
+			  $$ = make_redirection (source, r_input_output, redir, REDIR_VARASSIGN);
+			}
+	|	LESS_LESS WORD
+			{
+			  source.dest = 0;
+			  redir.filename = $2;
+			  $$ = make_redirection (source, r_reading_until, redir, 0);
+			  push_heredoc ($$);
+			}
+	|	NUMBER LESS_LESS WORD
+			{
+			  source.dest = $1;
+			  redir.filename = $3;
+			  $$ = make_redirection (source, r_reading_until, redir, 0);
+			  push_heredoc ($$);
+			}
+	|	REDIR_WORD LESS_LESS WORD
+			{
+			  source.filename = $1;
+			  redir.filename = $3;
+			  $$ = make_redirection (source, r_reading_until, redir, REDIR_VARASSIGN);
+			  push_heredoc ($$);
+			}
+	|	LESS_LESS_MINUS WORD
+			{
+			  source.dest = 0;
+			  redir.filename = $2;
+			  $$ = make_redirection (source, r_deblank_reading_until, redir, 0);
+			  push_heredoc ($$);
+			}
+	|	NUMBER LESS_LESS_MINUS WORD
+			{
+			  source.dest = $1;
+			  redir.filename = $3;
+			  $$ = make_redirection (source, r_deblank_reading_until, redir, 0);
+			  push_heredoc ($$);
+			}
+	|	REDIR_WORD  LESS_LESS_MINUS WORD
+			{
+			  source.filename = $1;
+			  redir.filename = $3;
+			  $$ = make_redirection (source, r_deblank_reading_until, redir, REDIR_VARASSIGN);
+			  push_heredoc ($$);
+			}
+	|	LESS_LESS_LESS WORD
+			{
+			  source.dest = 0;
+			  redir.filename = $2;
+			  $$ = make_redirection (source, r_reading_string, redir, 0);
+			}
+	|	NUMBER LESS_LESS_LESS WORD
+			{
+			  source.dest = $1;
+			  redir.filename = $3;
+			  $$ = make_redirection (source, r_reading_string, redir, 0);
+			}
+	|	REDIR_WORD LESS_LESS_LESS WORD
+			{
+			  source.filename = $1;
+			  redir.filename = $3;
+			  $$ = make_redirection (source, r_reading_string, redir, REDIR_VARASSIGN);
+			}
+	|	LESS_AND NUMBER
+			{
+			  source.dest = 0;
+			  redir.dest = $2;
+			  $$ = make_redirection (source, r_duplicating_input, redir, 0);
+			}
+	|	NUMBER LESS_AND NUMBER
+			{
+			  source.dest = $1;
+			  redir.dest = $3;
+			  $$ = make_redirection (source, r_duplicating_input, redir, 0);
+			}
+	|	REDIR_WORD LESS_AND NUMBER
+			{
+			  source.filename = $1;
+			  redir.dest = $3;
+			  $$ = make_redirection (source, r_duplicating_input, redir, REDIR_VARASSIGN);
+			}
+	|	GREATER_AND NUMBER
+			{
+			  source.dest = 1;
+			  redir.dest = $2;
+			  $$ = make_redirection (source, r_duplicating_output, redir, 0);
+			}
+	|	NUMBER GREATER_AND NUMBER
+			{
+			  source.dest = $1;
+			  redir.dest = $3;
+			  $$ = make_redirection (source, r_duplicating_output, redir, 0);
+			}
+	|	REDIR_WORD GREATER_AND NUMBER
+			{
+			  source.filename = $1;
+			  redir.dest = $3;
+			  $$ = make_redirection (source, r_duplicating_output, redir, REDIR_VARASSIGN);
+			}
+	|	LESS_AND WORD
+			{
+			  source.dest = 0;
+			  redir.filename = $2;
+			  $$ = make_redirection (source, r_duplicating_input_word, redir, 0);
+			}
+	|	NUMBER LESS_AND WORD
+			{
+			  source.dest = $1;
+			  redir.filename = $3;
+			  $$ = make_redirection (source, r_duplicating_input_word, redir, 0);
+			}
+	|	REDIR_WORD LESS_AND WORD
+			{
+			  source.filename = $1;
+			  redir.filename = $3;
+			  $$ = make_redirection (source, r_duplicating_input_word, redir, REDIR_VARASSIGN);
+			}
+	|	GREATER_AND WORD
+			{
+			  source.dest = 1;
+			  redir.filename = $2;
+			  $$ = make_redirection (source, r_duplicating_output_word, redir, 0);
+			}
+	|	NUMBER GREATER_AND WORD
+			{
+			  source.dest = $1;
+			  redir.filename = $3;
+			  $$ = make_redirection (source, r_duplicating_output_word, redir, 0);
+			}
+	|	REDIR_WORD GREATER_AND WORD
+			{
+			  source.filename = $1;
+			  redir.filename = $3;
+			  $$ = make_redirection (source, r_duplicating_output_word, redir, REDIR_VARASSIGN);
+			}
+	|	GREATER_AND '-'
+			{
+			  source.dest = 1;
+			  redir.dest = 0;
+			  $$ = make_redirection (source, r_close_this, redir, 0);
+			}
+	|	NUMBER GREATER_AND '-'
+			{
+			  source.dest = $1;
+			  redir.dest = 0;
+			  $$ = make_redirection (source, r_close_this, redir, 0);
+			}
+	|	REDIR_WORD GREATER_AND '-'
+			{
+			  source.filename = $1;
+			  redir.dest = 0;
+			  $$ = make_redirection (source, r_close_this, redir, REDIR_VARASSIGN);
+			}
+	|	LESS_AND '-'
+			{
+			  source.dest = 0;
+			  redir.dest = 0;
+			  $$ = make_redirection (source, r_close_this, redir, 0);
+			}
+	|	NUMBER LESS_AND '-'
+			{
+			  source.dest = $1;
+			  redir.dest = 0;
+			  $$ = make_redirection (source, r_close_this, redir, 0);
+			}
+	|	REDIR_WORD LESS_AND '-'
+			{
+			  source.filename = $1;
+			  redir.dest = 0;
+			  $$ = make_redirection (source, r_close_this, redir, REDIR_VARASSIGN);
+			}
+	|	AND_GREATER WORD
+			{
+			  source.dest = 1;
+			  redir.filename = $2;
+			  $$ = make_redirection (source, r_err_and_out, redir, 0);
+			}
+	|	AND_GREATER_GREATER WORD
+			{
+			  source.dest = 1;
+			  redir.filename = $2;
+			  $$ = make_redirection (source, r_append_err_and_out, redir, 0);
+			}
+	;
+
+simple_command_element: WORD
+			{ $$.word = $1; $$.redirect = 0; }
+	|	ASSIGNMENT_WORD
+			{ $$.word = $1; $$.redirect = 0; }
+	|	redirection
+			{ $$.redirect = $1; $$.word = 0; }
+	;
+
+redirection_list: redirection
+			{
+			  $$ = $1;
+			}
+	|	redirection_list redirection
+			{
+			  register REDIRECT *t;
+
+			  for (t = $1; t->next; t = t->next)
+			    ;
+			  t->next = $2;
+			  $$ = $1;
+			}
+	;
+
+simple_command:	simple_command_element
+			{ $$ = make_simple_command ($1, (COMMAND *)NULL); }
+	|	simple_command simple_command_element
+			{ $$ = make_simple_command ($2, $1); }
+	;
+
+command:	simple_command
+			{ $$ = clean_simple_command ($1); }
+	|	shell_command
+			{ $$ = $1; }
+	|	shell_command redirection_list
+			{
+			  COMMAND *tc;
+
+			  tc = $1;
+			  if (tc && tc->redirects)
+			    {
+			      register REDIRECT *t;
+			      for (t = tc->redirects; t->next; t = t->next)
+				;
+			      t->next = $2;
+			    }
+			  else if (tc)
+			    tc->redirects = $2;
+			  $$ = $1;
+			}
+	|	function_def
+			{ $$ = $1; }
+	|	coproc
+			{ $$ = $1; }
+	;
+
+shell_command:	for_command
+			{ $$ = $1; }
+	|	case_command
+			{ $$ = $1; }
+ 	|	WHILE compound_list DO compound_list DONE
+			{ $$ = make_while_command ($2, $4); }
+	|	UNTIL compound_list DO compound_list DONE
+			{ $$ = make_until_command ($2, $4); }
+	|	select_command
+			{ $$ = $1; }
+	|	if_command
+			{ $$ = $1; }
+	|	subshell
+			{ $$ = $1; }
+	|	group_command
+			{ $$ = $1; }
+	|	arith_command
+			{ $$ = $1; }
+	|	cond_command
+			{ $$ = $1; }
+	|	arith_for_command
+			{ $$ = $1; }
+	;
+
+for_command:	FOR WORD newline_list DO compound_list DONE
+			{
+			  $$ = make_for_command ($2, add_string_to_list ("\"$@\"", (WORD_LIST *)NULL), $5, word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+	|	FOR WORD newline_list '{' compound_list '}'
+			{
+			  $$ = make_for_command ($2, add_string_to_list ("\"$@\"", (WORD_LIST *)NULL), $5, word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+	|	FOR WORD ';' newline_list DO compound_list DONE
+			{
+			  $$ = make_for_command ($2, add_string_to_list ("\"$@\"", (WORD_LIST *)NULL), $6, word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+	|	FOR WORD ';' newline_list '{' compound_list '}'
+			{
+			  $$ = make_for_command ($2, add_string_to_list ("\"$@\"", (WORD_LIST *)NULL), $6, word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+	|	FOR WORD newline_list IN word_list list_terminator newline_list DO compound_list DONE
+			{
+			  $$ = make_for_command ($2, REVERSE_LIST ($5, WORD_LIST *), $9, word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+	|	FOR WORD newline_list IN word_list list_terminator newline_list '{' compound_list '}'
+			{
+			  $$ = make_for_command ($2, REVERSE_LIST ($5, WORD_LIST *), $9, word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+	|	FOR WORD newline_list IN list_terminator newline_list DO compound_list DONE
+			{
+			  $$ = make_for_command ($2, (WORD_LIST *)NULL, $8, word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+	|	FOR WORD newline_list IN list_terminator newline_list '{' compound_list '}'
+			{
+			  $$ = make_for_command ($2, (WORD_LIST *)NULL, $8, word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+	;
+
+arith_for_command:	FOR ARITH_FOR_EXPRS list_terminator newline_list DO compound_list DONE
+				{
+				  $$ = make_arith_for_command ($2, $6, arith_for_lineno);
+				  if ($$ == 0) YYERROR;
+				  if (word_top > 0) word_top--;
+				}
+	|		FOR ARITH_FOR_EXPRS list_terminator newline_list '{' compound_list '}'
+				{
+				  $$ = make_arith_for_command ($2, $6, arith_for_lineno);
+				  if ($$ == 0) YYERROR;
+				  if (word_top > 0) word_top--;
+				}
+	|		FOR ARITH_FOR_EXPRS DO compound_list DONE
+				{
+				  $$ = make_arith_for_command ($2, $4, arith_for_lineno);
+				  if ($$ == 0) YYERROR;
+				  if (word_top > 0) word_top--;
+				}
+	|		FOR ARITH_FOR_EXPRS '{' compound_list '}'
+				{
+				  $$ = make_arith_for_command ($2, $4, arith_for_lineno);
+				  if ($$ == 0) YYERROR;
+				  if (word_top > 0) word_top--;
+				}
+	;
+
+select_command:	SELECT WORD newline_list DO list DONE
+			{
+			  $$ = make_select_command ($2, add_string_to_list ("\"$@\"", (WORD_LIST *)NULL), $5, word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+	|	SELECT WORD newline_list '{' list '}'
+			{
+			  $$ = make_select_command ($2, add_string_to_list ("\"$@\"", (WORD_LIST *)NULL), $5, word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+	|	SELECT WORD ';' newline_list DO list DONE
+			{
+			  $$ = make_select_command ($2, add_string_to_list ("\"$@\"", (WORD_LIST *)NULL), $6, word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+	|	SELECT WORD ';' newline_list '{' list '}'
+			{
+			  $$ = make_select_command ($2, add_string_to_list ("\"$@\"", (WORD_LIST *)NULL), $6, word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+	|	SELECT WORD newline_list IN word_list list_terminator newline_list DO list DONE
+			{
+			  $$ = make_select_command ($2, REVERSE_LIST ($5, WORD_LIST *), $9, word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+	|	SELECT WORD newline_list IN word_list list_terminator newline_list '{' list '}'
+			{
+			  $$ = make_select_command ($2, REVERSE_LIST ($5, WORD_LIST *), $9, word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+	|	SELECT WORD newline_list IN list_terminator newline_list DO compound_list DONE
+			{
+			  $$ = make_select_command ($2, (WORD_LIST *)NULL, $8, word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+	|	SELECT WORD newline_list IN list_terminator newline_list '{' compound_list '}'
+			{
+			  $$ = make_select_command ($2, (WORD_LIST *)NULL, $8, word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+	;
+
+case_command:	CASE WORD newline_list IN newline_list ESAC
+			{
+			  $$ = make_case_command ($2, (PATTERN_LIST *)NULL, word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+	|	CASE WORD newline_list IN case_clause_sequence newline_list ESAC
+			{
+			  $$ = make_case_command ($2, $5, word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+	|	CASE WORD newline_list IN case_clause ESAC
+			{
+			  $$ = make_case_command ($2, $5, word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+	;
+
+function_def:	WORD '(' ')' newline_list function_body
+			{ $$ = make_function_def ($1, $5, function_dstart, function_bstart); }
+	|	FUNCTION WORD '(' ')' newline_list function_body
+			{ $$ = make_function_def ($2, $6, function_dstart, function_bstart); }
+	|	FUNCTION WORD function_body
+			{ $$ = make_function_def ($2, $3, function_dstart, function_bstart); }
+	|	FUNCTION WORD '\n' newline_list function_body
+			{ $$ = make_function_def ($2, $5, function_dstart, function_bstart); }
+	;
+
+function_body:	shell_command
+			{ $$ = $1; }
+	|	shell_command redirection_list
+			{
+			  COMMAND *tc;
+
+			  tc = $1;
+			  /* According to Posix.2 3.9.5, redirections
+			     specified after the body of a function should
+			     be attached to the function and performed when
+			     the function is executed, not as part of the
+			     function definition command. */
+			  /* XXX - I don't think it matters, but we might
+			     want to change this in the future to avoid
+			     problems differentiating between a function
+			     definition with a redirection and a function
+			     definition containing a single command with a
+			     redirection.  The two are semantically equivalent,
+			     though -- the only difference is in how the
+			     command printing code displays the redirections. */
+			  if (tc && tc->redirects)
+			    {
+			      register REDIRECT *t;
+			      for (t = tc->redirects; t->next; t = t->next)
+				;
+			      t->next = $2;
+			    }
+			  else if (tc)
+			    tc->redirects = $2;
+			  $$ = $1;
+			}
+	;
+
+subshell:	'(' compound_list ')'
+			{
+			  $$ = make_subshell_command ($2);
+			  $$->flags |= CMD_WANT_SUBSHELL;
+			}
+	;
+
+coproc:		COPROC shell_command
+			{
+			  $$ = make_coproc_command ("COPROC", $2);
+			  $$->flags |= CMD_WANT_SUBSHELL|CMD_COPROC_SUBSHELL;
+			}
+	|	COPROC shell_command redirection_list
+			{
+			  COMMAND *tc;
+
+			  tc = $2;
+			  if (tc && tc->redirects)
+			    {
+			      register REDIRECT *t;
+			      for (t = tc->redirects; t->next; t = t->next)
+				;
+			      t->next = $3;
+			    }
+			  else if (tc)
+			    tc->redirects = $3;
+			  $$ = make_coproc_command ("COPROC", $2);
+			  $$->flags |= CMD_WANT_SUBSHELL|CMD_COPROC_SUBSHELL;
+			}
+	|	COPROC WORD shell_command
+			{
+			  $$ = make_coproc_command ($2->word, $3);
+			  $$->flags |= CMD_WANT_SUBSHELL|CMD_COPROC_SUBSHELL;
+			}
+	|	COPROC WORD shell_command redirection_list
+			{
+			  COMMAND *tc;
+
+			  tc = $3;
+			  if (tc && tc->redirects)
+			    {
+			      register REDIRECT *t;
+			      for (t = tc->redirects; t->next; t = t->next)
+				;
+			      t->next = $4;
+			    }
+			  else if (tc)
+			    tc->redirects = $4;
+			  $$ = make_coproc_command ($2->word, $3);
+			  $$->flags |= CMD_WANT_SUBSHELL|CMD_COPROC_SUBSHELL;
+			}
+	|	COPROC simple_command
+			{
+			  $$ = make_coproc_command ("COPROC", clean_simple_command ($2));
+			  $$->flags |= CMD_WANT_SUBSHELL|CMD_COPROC_SUBSHELL;
+			}
+	;
+
+if_command:	IF compound_list THEN compound_list FI
+			{ $$ = make_if_command ($2, $4, (COMMAND *)NULL); }
+	|	IF compound_list THEN compound_list ELSE compound_list FI
+			{ $$ = make_if_command ($2, $4, $6); }
+	|	IF compound_list THEN compound_list elif_clause FI
+			{ $$ = make_if_command ($2, $4, $5); }
+	;
+
+
+group_command:	'{' compound_list '}'
+			{ $$ = make_group_command ($2); }
+	;
+
+arith_command:	ARITH_CMD
+			{ $$ = make_arith_command ($1); }
+	;
+
+cond_command:	COND_START COND_CMD COND_END
+			{ $$ = $2; }
+	; 
+
+elif_clause:	ELIF compound_list THEN compound_list
+			{ $$ = make_if_command ($2, $4, (COMMAND *)NULL); }
+	|	ELIF compound_list THEN compound_list ELSE compound_list
+			{ $$ = make_if_command ($2, $4, $6); }
+	|	ELIF compound_list THEN compound_list elif_clause
+			{ $$ = make_if_command ($2, $4, $5); }
+	;
+
+case_clause:	pattern_list
+	|	case_clause_sequence pattern_list
+			{ $2->next = $1; $$ = $2; }
+	;
+
+pattern_list:	newline_list pattern ')' compound_list
+			{ $$ = make_pattern_list ($2, $4); }
+	|	newline_list pattern ')' newline_list
+			{ $$ = make_pattern_list ($2, (COMMAND *)NULL); }
+	|	newline_list '(' pattern ')' compound_list
+			{ $$ = make_pattern_list ($3, $5); }
+	|	newline_list '(' pattern ')' newline_list
+			{ $$ = make_pattern_list ($3, (COMMAND *)NULL); }
+	;
+
+case_clause_sequence:  pattern_list SEMI_SEMI
+			{ $$ = $1; }
+	|	case_clause_sequence pattern_list SEMI_SEMI
+			{ $2->next = $1; $$ = $2; }
+	|	pattern_list SEMI_AND
+			{ $1->flags |= CASEPAT_FALLTHROUGH; $$ = $1; }
+	|	case_clause_sequence pattern_list SEMI_AND
+			{ $2->flags |= CASEPAT_FALLTHROUGH; $2->next = $1; $$ = $2; }
+	|	pattern_list SEMI_SEMI_AND
+			{ $1->flags |= CASEPAT_TESTNEXT; $$ = $1; }
+	|	case_clause_sequence pattern_list SEMI_SEMI_AND
+			{ $2->flags |= CASEPAT_TESTNEXT; $2->next = $1; $$ = $2; }	
+	;
+
+pattern:	WORD
+			{ $$ = make_word_list ($1, (WORD_LIST *)NULL); }
+	|	pattern '|' WORD
+			{ $$ = make_word_list ($3, $1); }
+	;
+
+/* A list allows leading or trailing newlines and
+   newlines as operators (equivalent to semicolons).
+   It must end with a newline or semicolon.
+   Lists are used within commands such as if, for, while.  */
+
+list:		newline_list list0
+			{
+			  $$ = $2;
+			  if (need_here_doc)
+			    gather_here_documents ();
+			 }
+	;
+
+compound_list:	list
+	|	newline_list list1
+			{
+			  $$ = $2;
+			}
+	;
+
+list0:  	list1 '\n' newline_list
+	|	list1 '&' newline_list
+			{
+			  if ($1->type == cm_connection)
+			    $$ = connect_async_list ($1, (COMMAND *)NULL, '&');
+			  else
+			    $$ = command_connect ($1, (COMMAND *)NULL, '&');
+			}
+	|	list1 ';' newline_list
+
+	;
+
+list1:		list1 AND_AND newline_list list1
+			{ $$ = command_connect ($1, $4, AND_AND); }
+	|	list1 OR_OR newline_list list1
+			{ $$ = command_connect ($1, $4, OR_OR); }
+	|	list1 '&' newline_list list1
+			{
+			  if ($1->type == cm_connection)
+			    $$ = connect_async_list ($1, $4, '&');
+			  else
+			    $$ = command_connect ($1, $4, '&');
+			}
+	|	list1 ';' newline_list list1
+			{ $$ = command_connect ($1, $4, ';'); }
+	|	list1 '\n' newline_list list1
+			{ $$ = command_connect ($1, $4, ';'); }
+	|	pipeline_command
+			{ $$ = $1; }
+	;
+
+simple_list_terminator:	'\n'
+	|	yacc_EOF
+	;
+
+list_terminator:'\n'
+		{ $$ = '\n'; }
+	|	';'
+		{ $$ = ';'; }
+	|	yacc_EOF
+		{ $$ = yacc_EOF; }
+	;
+
+newline_list:
+	|	newline_list '\n'
+	;
+
+/* A simple_list is a list that contains no significant newlines
+   and no leading or trailing newlines.  Newlines are allowed
+   only following operators, where they are not significant.
+
+   This is what an inputunit consists of.  */
+
+simple_list:	simple_list1
+			{
+			  $$ = $1;
+			  if (need_here_doc)
+			    gather_here_documents ();
+			  if ((parser_state & PST_CMDSUBST) && current_token == shell_eof_token)
+			    {
+			      global_command = $1;
+			      eof_encountered = 0;
+			      rewind_input_string ();
+			      YYACCEPT;
+			    }
+			}
+	|	simple_list1 '&'
+			{
+			  if ($1->type == cm_connection)
+			    $$ = connect_async_list ($1, (COMMAND *)NULL, '&');
+			  else
+			    $$ = command_connect ($1, (COMMAND *)NULL, '&');
+			  if (need_here_doc)
+			    gather_here_documents ();
+			  if ((parser_state & PST_CMDSUBST) && current_token == shell_eof_token)
+			    {
+			      global_command = $1;
+			      eof_encountered = 0;
+			      rewind_input_string ();
+			      YYACCEPT;
+			    }
+			}
+	|	simple_list1 ';'
+			{
+			  $$ = $1;
+			  if (need_here_doc)
+			    gather_here_documents ();
+			  if ((parser_state & PST_CMDSUBST) && current_token == shell_eof_token)
+			    {
+			      global_command = $1;
+			      eof_encountered = 0;
+			      rewind_input_string ();
+			      YYACCEPT;
+			    }
+			}
+	;
+
+simple_list1:	simple_list1 AND_AND newline_list simple_list1
+			{ $$ = command_connect ($1, $4, AND_AND); }
+	|	simple_list1 OR_OR newline_list simple_list1
+			{ $$ = command_connect ($1, $4, OR_OR); }
+	|	simple_list1 '&' simple_list1
+			{
+			  if ($1->type == cm_connection)
+			    $$ = connect_async_list ($1, $3, '&');
+			  else
+			    $$ = command_connect ($1, $3, '&');
+			}
+	|	simple_list1 ';' simple_list1
+			{ $$ = command_connect ($1, $3, ';'); }
+
+	|	pipeline_command
+			{ $$ = $1; }
+	;
+
+pipeline_command: pipeline
+			{ $$ = $1; }			
+	|	BANG pipeline_command
+			{
+			  if ($2)
+			    $2->flags ^= CMD_INVERT_RETURN;	/* toggle */
+			  $$ = $2;
+			}
+	|	timespec pipeline_command
+			{
+			  if ($2)
+			    $2->flags |= $1;
+			  $$ = $2;
+			}
+	|	timespec list_terminator
+			{
+			  ELEMENT x;
+
+			  /* Boy, this is unclean.  `time' by itself can
+			     time a null command.  We cheat and push a
+			     newline back if the list_terminator was a newline
+			     to avoid the double-newline problem (one to
+			     terminate this, one to terminate the command) */
+			  x.word = 0;
+			  x.redirect = 0;
+			  $$ = make_simple_command (x, (COMMAND *)NULL);
+			  $$->flags |= $1;
+			  /* XXX - let's cheat and push a newline back */
+			  if ($2 == '\n')
+			    token_to_read = '\n';
+			  else if ($2 == ';')
+			    token_to_read = ';';
+			  parser_state &= ~PST_REDIRLIST;	/* make_simple_command sets this */
+			}
+	|	BANG list_terminator
+			{
+			  ELEMENT x;
+
+			  /* This is just as unclean.  Posix says that `!'
+			     by itself should be equivalent to `false'.
+			     We cheat and push a
+			     newline back if the list_terminator was a newline
+			     to avoid the double-newline problem (one to
+			     terminate this, one to terminate the command) */
+			  x.word = 0;
+			  x.redirect = 0;
+			  $$ = make_simple_command (x, (COMMAND *)NULL);
+			  $$->flags |= CMD_INVERT_RETURN;
+			  /* XXX - let's cheat and push a newline back */
+			  if ($2 == '\n')
+			    token_to_read = '\n';
+			  if ($2 == ';')
+			    token_to_read = ';';
+			  parser_state &= ~PST_REDIRLIST;	/* make_simple_command sets this */
+			}
+	;
+
+pipeline:	pipeline '|' newline_list pipeline
+			{ $$ = command_connect ($1, $4, '|'); }
+	|	pipeline BAR_AND newline_list pipeline
+			{
+			  /* Make cmd1 |& cmd2 equivalent to cmd1 2>&1 | cmd2 */
+			  COMMAND *tc;
+			  REDIRECTEE rd, sd;
+			  REDIRECT *r;
+
+			  tc = $1->type == cm_simple ? (COMMAND *)$1->value.Simple : $1;
+			  sd.dest = 2;
+			  rd.dest = 1;
+			  r = make_redirection (sd, r_duplicating_output, rd, 0);
+			  if (tc->redirects)
+			    {
+			      register REDIRECT *t;
+			      for (t = tc->redirects; t->next; t = t->next)
+				;
+			      t->next = r;
+			    }
+			  else
+			    tc->redirects = r;
+
+			  $$ = command_connect ($1, $4, '|');
+			}
+	|	command
+			{ $$ = $1; }
+	;
+
+timespec:	TIME
+			{ $$ = CMD_TIME_PIPELINE; }
+	|	TIME TIMEOPT
+			{ $$ = CMD_TIME_PIPELINE|CMD_TIME_POSIX; }
+	|	TIME TIMEIGN
+			{ $$ = CMD_TIME_PIPELINE|CMD_TIME_POSIX; }
+	|	TIME TIMEOPT TIMEIGN
+			{ $$ = CMD_TIME_PIPELINE|CMD_TIME_POSIX; }
+	;
+%%
+
+/* Initial size to allocate for tokens, and the
+   amount to grow them by. */
+#define TOKEN_DEFAULT_INITIAL_SIZE 496
+#define TOKEN_DEFAULT_GROW_SIZE 512
+
+/* Should we call prompt_again? */
+#define SHOULD_PROMPT() \
+  (interactive && (bash_input.type == st_stdin || bash_input.type == st_stream))
+
+#if defined (ALIAS)
+#  define expanding_alias() (pushed_string_list && pushed_string_list->expander)
+#else
+#  define expanding_alias() 0
+#endif
+
+/* Global var is non-zero when end of file has been reached. */
+int EOF_Reached = 0;
+
+#ifdef DEBUG
+static void
+debug_parser (i)
+     int i;
+{
+#if YYDEBUG != 0
+  yydebug = i;
+  yyoutstream = stdout;
+  yyerrstream = stderr;
+#endif
+}
+#endif
+
+/* yy_getc () returns the next available character from input or EOF.
+   yy_ungetc (c) makes `c' the next character to read.
+   init_yy_io (get, unget, type, location) makes the function GET the
+   installed function for getting the next character, makes UNGET the
+   installed function for un-getting a character, sets the type of stream
+   (either string or file) from TYPE, and makes LOCATION point to where
+   the input is coming from. */
+
+/* Unconditionally returns end-of-file. */
+int
+return_EOF ()
+{
+  return (EOF);
+}
+
+/* Variable containing the current get and unget functions.
+   See ./input.h for a clearer description. */
+BASH_INPUT bash_input;
+
+/* Set all of the fields in BASH_INPUT to NULL.  Free bash_input.name if it
+   is non-null, avoiding a memory leak. */
+void
+initialize_bash_input ()
+{
+  bash_input.type = st_none;
+  FREE (bash_input.name);
+  bash_input.name = (char *)NULL;
+  bash_input.location.file = (FILE *)NULL;
+  bash_input.location.string = (char *)NULL;
+  bash_input.getter = (sh_cget_func_t *)NULL;
+  bash_input.ungetter = (sh_cunget_func_t *)NULL;
+}
+
+/* Set the contents of the current bash input stream from
+   GET, UNGET, TYPE, NAME, and LOCATION. */
+void
+init_yy_io (get, unget, type, name, location)
+     sh_cget_func_t *get;
+     sh_cunget_func_t *unget;
+     enum stream_type type;
+     const char *name;
+     INPUT_STREAM location;
+{
+  bash_input.type = type;
+  FREE (bash_input.name);
+  bash_input.name = name ? savestring (name) : (char *)NULL;
+
+  /* XXX */
+#if defined (CRAY)
+  memcpy((char *)&bash_input.location.string, (char *)&location.string, sizeof(location));
+#else
+  bash_input.location = location;
+#endif
+  bash_input.getter = get;
+  bash_input.ungetter = unget;
+}
+
+char *
+yy_input_name ()
+{
+  return (bash_input.name ? bash_input.name : "stdin");
+}
+
+/* Call this to get the next character of input. */
+static int
+yy_getc ()
+{
+  return (*(bash_input.getter)) ();
+}
+
+/* Call this to unget C.  That is, to make C the next character
+   to be read. */
+static int
+yy_ungetc (c)
+     int c;
+{
+  return (*(bash_input.ungetter)) (c);
+}
+
+#if defined (BUFFERED_INPUT)
+#ifdef INCLUDE_UNUSED
+int
+input_file_descriptor ()
+{
+  switch (bash_input.type)
+    {
+    case st_stream:
+      return (fileno (bash_input.location.file));
+    case st_bstream:
+      return (bash_input.location.buffered_fd);
+    case st_stdin:
+    default:
+      return (fileno (stdin));
+    }
+}
+#endif
+#endif /* BUFFERED_INPUT */
+
+/* **************************************************************** */
+/*								    */
+/*		  Let input be read from readline ().		    */
+/*								    */
+/* **************************************************************** */
+
+#if defined (READLINE)
+char *current_readline_prompt = (char *)NULL;
+char *current_readline_line = (char *)NULL;
+int current_readline_line_index = 0;
+
+static int
+yy_readline_get ()
+{
+  SigHandler *old_sigint;
+  int line_len;
+  unsigned char c;
+
+  if (current_readline_line == 0)
+    {
+      if (bash_readline_initialized == 0)
+	initialize_readline ();
+
+#if defined (JOB_CONTROL)
+      if (job_control)
+	give_terminal_to (shell_pgrp, 0);
+#endif /* JOB_CONTROL */
+
+      old_sigint = IMPOSSIBLE_TRAP_HANDLER;
+      if (signal_is_ignored (SIGINT) == 0)
+	{
+	  old_sigint = (SigHandler *)set_signal_handler (SIGINT, sigint_sighandler);
+	}
+
+      sh_unset_nodelay_mode (fileno (rl_instream));	/* just in case */
+      current_readline_line = readline (current_readline_prompt ?
+      					  current_readline_prompt : "");
+
+      CHECK_TERMSIG;
+      if (signal_is_ignored (SIGINT) == 0)
+	{
+	  if (old_sigint != IMPOSSIBLE_TRAP_HANDLER)
+	    set_signal_handler (SIGINT, old_sigint);
+	}
+
+#if 0
+      /* Reset the prompt to the decoded value of prompt_string_pointer. */
+      reset_readline_prompt ();
+#endif
+
+      if (current_readline_line == 0)
+	return (EOF);
+
+      current_readline_line_index = 0;
+      line_len = strlen (current_readline_line);
+
+      current_readline_line = (char *)xrealloc (current_readline_line, 2 + line_len);
+      current_readline_line[line_len++] = '\n';
+      current_readline_line[line_len] = '\0';
+    }
+
+  if (current_readline_line[current_readline_line_index] == 0)
+    {
+      free (current_readline_line);
+      current_readline_line = (char *)NULL;
+      return (yy_readline_get ());
+    }
+  else
+    {
+      c = current_readline_line[current_readline_line_index++];
+      return (c);
+    }
+}
+
+static int
+yy_readline_unget (c)
+     int c;
+{
+  if (current_readline_line_index && current_readline_line)
+    current_readline_line[--current_readline_line_index] = c;
+  return (c);
+}
+
+void
+with_input_from_stdin ()
+{
+  INPUT_STREAM location;
+
+  if (bash_input.type != st_stdin && stream_on_stack (st_stdin) == 0)
+    {
+      location.string = current_readline_line;
+      init_yy_io (yy_readline_get, yy_readline_unget,
+		  st_stdin, "readline stdin", location);
+    }
+}
+
+/* Will we be collecting another input line and printing a prompt? This uses
+   different conditions than SHOULD_PROMPT(), since readline allows a user to
+   embed a newline in the middle of the line it collects, which the parser
+   will interpret as a line break and command delimiter. */
+int
+parser_will_prompt ()
+{
+  return (current_readline_line == 0 || current_readline_line[current_readline_line_index] == 0);
+}
+  
+#else  /* !READLINE */
+
+void
+with_input_from_stdin ()
+{
+  with_input_from_stream (stdin, "stdin");
+}
+#endif	/* !READLINE */
+
+/* **************************************************************** */
+/*								    */
+/*   Let input come from STRING.  STRING is zero terminated.	    */
+/*								    */
+/* **************************************************************** */
+
+static int
+yy_string_get ()
+{
+  register char *string;
+  register unsigned char c;
+
+  string = bash_input.location.string;
+
+  /* If the string doesn't exist, or is empty, EOF found. */
+  if (string && *string)
+    {
+      c = *string++;
+      bash_input.location.string = string;
+      return (c);
+    }
+  else
+    return (EOF);
+}
+
+static int
+yy_string_unget (c)
+     int c;
+{
+  *(--bash_input.location.string) = c;
+  return (c);
+}
+
+void
+with_input_from_string (string, name)
+     char *string;
+     const char *name;
+{
+  INPUT_STREAM location;
+
+  location.string = string;
+  init_yy_io (yy_string_get, yy_string_unget, st_string, name, location);
+}
+
+/* Count the number of characters we've consumed from bash_input.location.string
+   and read into shell_input_line, but have not returned from shell_getc.
+   That is the true input location.  Rewind bash_input.location.string by
+   that number of characters, so it points to the last character actually
+   consumed by the parser. */
+static void
+rewind_input_string ()
+{
+  int xchars;
+
+  /* number of unconsumed characters in the input -- XXX need to take newlines
+     into account, e.g., $(...\n) */
+  xchars = shell_input_line_len - shell_input_line_index;
+  if (bash_input.location.string[-1] == '\n')
+    xchars++;
+
+  /* XXX - how to reflect bash_input.location.string back to string passed to
+     parse_and_execute or xparse_dolparen?  xparse_dolparen needs to know how
+     far into the string we parsed.  parse_and_execute knows where bash_input.
+     location.string is, and how far from orig_string that is -- that's the
+     number of characters the command consumed. */
+
+  /* bash_input.location.string - xchars should be where we parsed to */
+  /* need to do more validation on xchars value for sanity -- test cases. */
+  bash_input.location.string -= xchars;
+}
+
+/* **************************************************************** */
+/*								    */
+/*		     Let input come from STREAM.		    */
+/*								    */
+/* **************************************************************** */
+
+/* These two functions used to test the value of the HAVE_RESTARTABLE_SYSCALLS
+   define, and just use getc/ungetc if it was defined, but since bash
+   installs most of its signal handlers without the SA_RESTART flag, some
+   signals received during a read(2) will not cause the read to be restarted.
+   We will need to restart it ourselves. */
+
+static int
+yy_stream_get ()
+{
+  int result;
+
+  result = EOF;
+  if (bash_input.location.file)
+    {
+      /* XXX - don't need terminate_immediately; getc_with_restart checks
+	 for terminating signals itself if read returns < 0 */
+      result = getc_with_restart (bash_input.location.file);
+    }
+  return (result);
+}
+
+static int
+yy_stream_unget (c)
+     int c;
+{
+  return (ungetc_with_restart (c, bash_input.location.file));
+}
+
+void
+with_input_from_stream (stream, name)
+     FILE *stream;
+     const char *name;
+{
+  INPUT_STREAM location;
+
+  location.file = stream;
+  init_yy_io (yy_stream_get, yy_stream_unget, st_stream, name, location);
+}
+
+typedef struct stream_saver {
+  struct stream_saver *next;
+  BASH_INPUT bash_input;
+  int line;
+#if defined (BUFFERED_INPUT)
+  BUFFERED_STREAM *bstream;
+#endif /* BUFFERED_INPUT */
+} STREAM_SAVER;
+
+/* The globally known line number. */
+int line_number = 0;
+
+/* The line number offset set by assigning to LINENO.  Not currently used. */
+int line_number_base = 0;
+
+#if defined (COND_COMMAND)
+static int cond_lineno;
+static int cond_token;
+#endif
+
+STREAM_SAVER *stream_list = (STREAM_SAVER *)NULL;
+
+void
+push_stream (reset_lineno)
+     int reset_lineno;
+{
+  STREAM_SAVER *saver = (STREAM_SAVER *)xmalloc (sizeof (STREAM_SAVER));
+
+  xbcopy ((char *)&bash_input, (char *)&(saver->bash_input), sizeof (BASH_INPUT));
+
+#if defined (BUFFERED_INPUT)
+  saver->bstream = (BUFFERED_STREAM *)NULL;
+  /* If we have a buffered stream, clear out buffers[fd]. */
+  if (bash_input.type == st_bstream && bash_input.location.buffered_fd >= 0)
+    saver->bstream = set_buffered_stream (bash_input.location.buffered_fd,
+    					  (BUFFERED_STREAM *)NULL);
+#endif /* BUFFERED_INPUT */
+
+  saver->line = line_number;
+  bash_input.name = (char *)NULL;
+  saver->next = stream_list;
+  stream_list = saver;
+  EOF_Reached = 0;
+  if (reset_lineno)
+    line_number = 0;
+}
+
+void
+pop_stream ()
+{
+  if (!stream_list)
+    EOF_Reached = 1;
+  else
+    {
+      STREAM_SAVER *saver = stream_list;
+
+      EOF_Reached = 0;
+      stream_list = stream_list->next;
+
+      init_yy_io (saver->bash_input.getter,
+		  saver->bash_input.ungetter,
+		  saver->bash_input.type,
+		  saver->bash_input.name,
+		  saver->bash_input.location);
+
+#if defined (BUFFERED_INPUT)
+      /* If we have a buffered stream, restore buffers[fd]. */
+      /* If the input file descriptor was changed while this was on the
+	 save stack, update the buffered fd to the new file descriptor and
+	 re-establish the buffer <-> bash_input fd correspondence. */
+      if (bash_input.type == st_bstream && bash_input.location.buffered_fd >= 0)
+	{
+	  if (bash_input_fd_changed)
+	    {
+	      bash_input_fd_changed = 0;
+	      if (default_buffered_input >= 0)
+		{
+		  bash_input.location.buffered_fd = default_buffered_input;
+		  saver->bstream->b_fd = default_buffered_input;
+		  SET_CLOSE_ON_EXEC (default_buffered_input);
+		}
+	    }
+	  /* XXX could free buffered stream returned as result here. */
+	  set_buffered_stream (bash_input.location.buffered_fd, saver->bstream);
+	}
+#endif /* BUFFERED_INPUT */
+
+      line_number = saver->line;
+
+      FREE (saver->bash_input.name);
+      free (saver);
+    }
+}
+
+/* Return 1 if a stream of type TYPE is saved on the stack. */
+int
+stream_on_stack (type)
+     enum stream_type type;
+{
+  register STREAM_SAVER *s;
+
+  for (s = stream_list; s; s = s->next)
+    if (s->bash_input.type == type)
+      return 1;
+  return 0;
+}
+
+/* Save the current token state and return it in a malloced array. */
+int *
+save_token_state ()
+{
+  int *ret;
+
+  ret = (int *)xmalloc (4 * sizeof (int));
+  ret[0] = last_read_token;
+  ret[1] = token_before_that;
+  ret[2] = two_tokens_ago;
+  ret[3] = current_token;
+  return ret;
+}
+
+void
+restore_token_state (ts)
+     int *ts;
+{
+  if (ts == 0)
+    return;
+  last_read_token = ts[0];
+  token_before_that = ts[1];
+  two_tokens_ago = ts[2];
+  current_token = ts[3];
+}
+
+/*
+ * This is used to inhibit alias expansion and reserved word recognition
+ * inside case statement pattern lists.  A `case statement pattern list' is:
+ *
+ *	everything between the `in' in a `case word in' and the next ')'
+ *	or `esac'
+ *	everything between a `;;' and the next `)' or `esac'
+ */
+
+#if defined (ALIAS) || defined (DPAREN_ARITHMETIC)
+
+#define END_OF_ALIAS 0
+
+/*
+ * Pseudo-global variables used in implementing token-wise alias expansion.
+ */
+
+/*
+ * Pushing and popping strings.  This works together with shell_getc to
+ * implement alias expansion on a per-token basis.
+ */
+
+#define PSH_ALIAS	0x01
+#define PSH_DPAREN	0x02
+#define PSH_SOURCE	0x04
+#define PSH_ARRAY	0x08
+
+typedef struct string_saver {
+  struct string_saver *next;
+  int expand_alias;  /* Value to set expand_alias to when string is popped. */
+  char *saved_line;
+#if defined (ALIAS)
+  alias_t *expander;   /* alias that caused this line to be pushed. */
+#endif
+  size_t saved_line_size, saved_line_index;
+  int saved_line_terminator;
+  int flags;
+} STRING_SAVER;
+
+STRING_SAVER *pushed_string_list = (STRING_SAVER *)NULL;
+
+/*
+ * Push the current shell_input_line onto a stack of such lines and make S
+ * the current input.  Used when expanding aliases.  EXPAND is used to set
+ * the value of expand_next_token when the string is popped, so that the
+ * word after the alias in the original line is handled correctly when the
+ * alias expands to multiple words.  TOKEN is the token that was expanded
+ * into S; it is saved and used to prevent infinite recursive expansion.
+ */
+static void
+push_string (s, expand, ap)
+     char *s;
+     int expand;
+     alias_t *ap;
+{
+  STRING_SAVER *temp = (STRING_SAVER *)xmalloc (sizeof (STRING_SAVER));
+
+  temp->expand_alias = expand;
+  temp->saved_line = shell_input_line;
+  temp->saved_line_size = shell_input_line_size;
+  temp->saved_line_index = shell_input_line_index;
+  temp->saved_line_terminator = shell_input_line_terminator;
+  temp->flags = 0;
+#if defined (ALIAS)
+  temp->expander = ap;
+  if (ap)
+    temp->flags = PSH_ALIAS;
+#endif
+  temp->next = pushed_string_list;
+  pushed_string_list = temp;
+
+#if defined (ALIAS)
+  if (ap)
+    ap->flags |= AL_BEINGEXPANDED;
+#endif
+
+  shell_input_line = s;
+  shell_input_line_size = STRLEN (s);
+  shell_input_line_index = 0;
+  shell_input_line_terminator = '\0';
+#if 0
+  parser_state &= ~PST_ALEXPNEXT;	/* XXX */
+#endif
+
+  set_line_mbstate ();
+}
+
+/*
+ * Make the top of the pushed_string stack be the current shell input.
+ * Only called when there is something on the stack.  Called from shell_getc
+ * when it thinks it has consumed the string generated by an alias expansion
+ * and needs to return to the original input line.
+ */
+static void
+pop_string ()
+{
+  STRING_SAVER *t;
+
+  FREE (shell_input_line);
+  shell_input_line = pushed_string_list->saved_line;
+  shell_input_line_index = pushed_string_list->saved_line_index;
+  shell_input_line_size = pushed_string_list->saved_line_size;
+  shell_input_line_terminator = pushed_string_list->saved_line_terminator;
+
+  if (pushed_string_list->expand_alias)
+    parser_state |= PST_ALEXPNEXT;
+  else
+    parser_state &= ~PST_ALEXPNEXT;
+
+  t = pushed_string_list;
+  pushed_string_list = pushed_string_list->next;
+
+#if defined (ALIAS)
+  if (t->expander)
+    t->expander->flags &= ~AL_BEINGEXPANDED;
+#endif
+
+  free ((char *)t);
+
+  set_line_mbstate ();
+}
+
+static void
+free_string_list ()
+{
+  register STRING_SAVER *t, *t1;
+
+  for (t = pushed_string_list; t; )
+    {
+      t1 = t->next;
+      FREE (t->saved_line);
+#if defined (ALIAS)
+      if (t->expander)
+	t->expander->flags &= ~AL_BEINGEXPANDED;
+#endif
+      free ((char *)t);
+      t = t1;
+    }
+  pushed_string_list = (STRING_SAVER *)NULL;
+}
+
+#endif /* ALIAS || DPAREN_ARITHMETIC */
+
+void
+free_pushed_string_input ()
+{
+#if defined (ALIAS) || defined (DPAREN_ARITHMETIC)
+  free_string_list ();
+#endif
+}
+
+int
+parser_expanding_alias ()
+{
+  return (expanding_alias ());
+}
+
+void
+parser_save_alias ()
+{
+#if defined (ALIAS) || defined (DPAREN_ARITHMETIC)
+  push_string ((char *)NULL, 0, (alias_t *)NULL);
+  pushed_string_list->flags = PSH_SOURCE;	/* XXX - for now */
+#else
+  ;
+#endif
+}
+
+void
+parser_restore_alias ()
+{
+#if defined (ALIAS) || defined (DPAREN_ARITHMETIC)
+  if (pushed_string_list)
+    pop_string ();
+#else
+  ;
+#endif
+}
+
+#if defined (ALIAS)
+/* Before freeing AP, make sure that there aren't any cases of pointer
+   aliasing that could cause us to reference freed memory later on. */
+void
+clear_string_list_expander (ap)
+     alias_t *ap;
+{
+  register STRING_SAVER *t;
+
+  for (t = pushed_string_list; t; t = t->next)
+    {
+      if (t->expander && t->expander == ap)
+	t->expander = 0;
+    }
+}
+#endif
+
+void
+clear_shell_input_line ()
+{
+  if (shell_input_line)
+    shell_input_line[shell_input_line_index = 0] = '\0';
+}
+
+/* Return a line of text, taken from wherever yylex () reads input.
+   If there is no more input, then we return NULL.  If REMOVE_QUOTED_NEWLINE
+   is non-zero, we remove unquoted \<newline> pairs.  This is used by
+   read_secondary_line to read here documents. */
+static char *
+read_a_line (remove_quoted_newline)
+     int remove_quoted_newline;
+{
+  static char *line_buffer = (char *)NULL;
+  static int buffer_size = 0;
+  int indx, c, peekc, pass_next;
+
+#if defined (READLINE)
+  if (no_line_editing && SHOULD_PROMPT ())
+#else
+  if (SHOULD_PROMPT ())
+#endif
+    print_prompt ();
+
+  pass_next = indx = 0;
+  while (1)
+    {
+      /* Allow immediate exit if interrupted during input. */
+      QUIT;
+
+      c = yy_getc ();
+
+      /* Ignore null bytes in input. */
+      if (c == 0)
+	{
+#if 0
+	  internal_warning ("read_a_line: ignored null byte in input");
+#endif
+	  continue;
+	}
+
+      /* If there is no more input, then we return NULL. */
+      if (c == EOF)
+	{
+	  if (interactive && bash_input.type == st_stream)
+	    clearerr (stdin);
+	  if (indx == 0)
+	    return ((char *)NULL);
+	  c = '\n';
+	}
+
+      /* `+2' in case the final character in the buffer is a newline or we
+	 have to handle CTLESC or CTLNUL. */
+      RESIZE_MALLOCED_BUFFER (line_buffer, indx, 2, buffer_size, 128);
+
+      /* IF REMOVE_QUOTED_NEWLINES is non-zero, we are reading a
+	 here document with an unquoted delimiter.  In this case,
+	 the line will be expanded as if it were in double quotes.
+	 We allow a backslash to escape the next character, but we
+	 need to treat the backslash specially only if a backslash
+	 quoting a backslash-newline pair appears in the line. */
+      if (pass_next)
+	{
+	  line_buffer[indx++] = c;
+	  pass_next = 0;
+	}
+      else if (c == '\\' && remove_quoted_newline)
+	{
+	  QUIT;
+	  peekc = yy_getc ();
+	  if (peekc == '\n')
+	    {
+	      line_number++;
+	      continue;	/* Make the unquoted \<newline> pair disappear. */
+	    }
+	  else
+	    {
+	      yy_ungetc (peekc);
+	      pass_next = 1;
+	      line_buffer[indx++] = c;		/* Preserve the backslash. */
+	    }
+	}
+      else
+	{
+	  /* remove_quoted_newline is non-zero if the here-document delimiter
+	     is unquoted. In this case, we will be expanding the lines and
+	     need to make sure CTLESC and CTLNUL in the input are quoted. */
+	  if (remove_quoted_newline && (c == CTLESC || c == CTLNUL))
+	    line_buffer[indx++] = CTLESC;
+	  line_buffer[indx++] = c;
+	}
+
+      if (c == '\n')
+	{
+	  line_buffer[indx] = '\0';
+	  return (line_buffer);
+	}
+    }
+}
+
+/* Return a line as in read_a_line (), but insure that the prompt is
+   the secondary prompt.  This is used to read the lines of a here
+   document.  REMOVE_QUOTED_NEWLINE is non-zero if we should remove
+   newlines quoted with backslashes while reading the line.  It is
+   non-zero unless the delimiter of the here document was quoted. */
+char *
+read_secondary_line (remove_quoted_newline)
+     int remove_quoted_newline;
+{
+  char *ret;
+  int n, c;
+
+  prompt_string_pointer = &ps2_prompt;
+  if (SHOULD_PROMPT())
+    prompt_again ();
+  ret = read_a_line (remove_quoted_newline);
+#if defined (HISTORY)
+  if (ret && remember_on_history && (parser_state & PST_HEREDOC))
+    {
+      /* To make adding the here-document body right, we need to rely on
+	 history_delimiting_chars() returning \n for the first line of the
+	 here-document body and the null string for the second and subsequent
+	 lines, so we avoid double newlines.
+	 current_command_line_count == 2 for the first line of the body. */
+
+      current_command_line_count++;
+      maybe_add_history (ret);
+    }
+#endif /* HISTORY */
+  return ret;
+}
+
+/* **************************************************************** */
+/*								    */
+/*				YYLEX ()			    */
+/*								    */
+/* **************************************************************** */
+
+/* Reserved words.  These are only recognized as the first word of a
+   command. */
+STRING_INT_ALIST word_token_alist[] = {
+  { "if", IF },
+  { "then", THEN },
+  { "else", ELSE },
+  { "elif", ELIF },
+  { "fi", FI },
+  { "case", CASE },
+  { "esac", ESAC },
+  { "for", FOR },
+#if defined (SELECT_COMMAND)
+  { "select", SELECT },
+#endif
+  { "while", WHILE },
+  { "until", UNTIL },
+  { "do", DO },
+  { "done", DONE },
+  { "in", IN },
+  { "function", FUNCTION },
+#if defined (COMMAND_TIMING)
+  { "time", TIME },
+#endif
+  { "{", '{' },
+  { "}", '}' },
+  { "!", BANG },
+#if defined (COND_COMMAND)
+  { "[[", COND_START },
+  { "]]", COND_END },
+#endif
+#if defined (COPROCESS_SUPPORT)
+  { "coproc", COPROC },
+#endif
+  { (char *)NULL, 0}
+};
+
+/* other tokens that can be returned by read_token() */
+STRING_INT_ALIST other_token_alist[] = {
+  /* Multiple-character tokens with special values */
+  { "--", TIMEIGN },
+  { "-p", TIMEOPT },
+  { "&&", AND_AND },
+  { "||", OR_OR },
+  { ">>", GREATER_GREATER },
+  { "<<", LESS_LESS },
+  { "<&", LESS_AND },
+  { ">&", GREATER_AND },
+  { ";;", SEMI_SEMI },
+  { ";&", SEMI_AND },
+  { ";;&", SEMI_SEMI_AND },
+  { "<<-", LESS_LESS_MINUS },
+  { "<<<", LESS_LESS_LESS },
+  { "&>", AND_GREATER },
+  { "&>>", AND_GREATER_GREATER },
+  { "<>", LESS_GREATER },
+  { ">|", GREATER_BAR },
+  { "|&", BAR_AND },
+  { "EOF", yacc_EOF },
+  /* Tokens whose value is the character itself */
+  { ">", '>' },
+  { "<", '<' },
+  { "-", '-' },
+  { "{", '{' },
+  { "}", '}' },
+  { ";", ';' },
+  { "(", '(' },
+  { ")", ')' },
+  { "|", '|' },
+  { "&", '&' },
+  { "newline", '\n' },
+  { (char *)NULL, 0}
+};
+
+/* others not listed here:
+	WORD			look at yylval.word
+	ASSIGNMENT_WORD		look at yylval.word
+	NUMBER			look at yylval.number
+	ARITH_CMD		look at yylval.word_list
+	ARITH_FOR_EXPRS		look at yylval.word_list
+	COND_CMD		look at yylval.command
+*/
+
+/* These are used by read_token_word, but appear up here so that shell_getc
+   can use them to decide when to add otherwise blank lines to the history. */
+
+/* The primary delimiter stack. */
+struct dstack dstack = {  (char *)NULL, 0, 0 };
+
+/* A temporary delimiter stack to be used when decoding prompt strings.
+   This is needed because command substitutions in prompt strings (e.g., PS2)
+   can screw up the parser's quoting state. */
+static struct dstack temp_dstack = { (char *)NULL, 0, 0 };
+
+/* Macro for accessing the top delimiter on the stack.  Returns the
+   delimiter or zero if none. */
+#define current_delimiter(ds) \
+  (ds.delimiter_depth ? ds.delimiters[ds.delimiter_depth - 1] : 0)
+
+#define push_delimiter(ds, character) \
+  do \
+    { \
+      if (ds.delimiter_depth + 2 > ds.delimiter_space) \
+	ds.delimiters = (char *)xrealloc \
+	  (ds.delimiters, (ds.delimiter_space += 10) * sizeof (char)); \
+      ds.delimiters[ds.delimiter_depth] = character; \
+      ds.delimiter_depth++; \
+    } \
+  while (0)
+
+#define pop_delimiter(ds)	ds.delimiter_depth--
+
+/* Return the next shell input character.  This always reads characters
+   from shell_input_line; when that line is exhausted, it is time to
+   read the next line.  This is called by read_token when the shell is
+   processing normal command input. */
+
+/* This implements one-character lookahead/lookbehind across physical input
+   lines, to avoid something being lost because it's pushed back with
+   shell_ungetc when we're at the start of a line. */
+static int eol_ungetc_lookahead = 0;
+
+static int unquoted_backslash = 0;
+
+static int
+shell_getc (remove_quoted_newline)
+     int remove_quoted_newline;
+{
+  register int i;
+  int c, truncating, last_was_backslash;
+  unsigned char uc;
+
+  QUIT;
+
+  last_was_backslash = 0;
+  if (sigwinch_received)
+    {
+      sigwinch_received = 0;
+      get_new_window_size (0, (int *)0, (int *)0);
+    }
+      
+  if (eol_ungetc_lookahead)
+    {
+      c = eol_ungetc_lookahead;
+      eol_ungetc_lookahead = 0;
+      return (c);
+    }
+
+#if defined (ALIAS) || defined (DPAREN_ARITHMETIC)
+  /* If shell_input_line[shell_input_line_index] == 0, but there is
+     something on the pushed list of strings, then we don't want to go
+     off and get another line.  We let the code down below handle it. */
+
+  if (!shell_input_line || ((!shell_input_line[shell_input_line_index]) &&
+			    (pushed_string_list == (STRING_SAVER *)NULL)))
+#else /* !ALIAS && !DPAREN_ARITHMETIC */
+  if (!shell_input_line || !shell_input_line[shell_input_line_index])
+#endif /* !ALIAS && !DPAREN_ARITHMETIC */
+    {
+      line_number++;
+
+      /* Let's not let one really really long line blow up memory allocation */
+      if (shell_input_line && shell_input_line_size >= 32768)
+	{
+	  free (shell_input_line);
+	  shell_input_line = 0;
+	  shell_input_line_size = 0;
+	}
+
+    restart_read:
+
+      /* Allow immediate exit if interrupted during input. */
+      QUIT;
+
+      i = truncating = 0;
+      shell_input_line_terminator = 0;
+
+      /* If the shell is interactive, but not currently printing a prompt
+         (interactive_shell && interactive == 0), we don't want to print
+         notifies or cleanup the jobs -- we want to defer it until we do
+         print the next prompt. */
+      if (interactive_shell == 0 || SHOULD_PROMPT())
+	{
+#if defined (JOB_CONTROL)
+      /* This can cause a problem when reading a command as the result
+	 of a trap, when the trap is called from flush_child.  This call
+	 had better not cause jobs to disappear from the job table in
+	 that case, or we will have big trouble. */
+	  notify_and_cleanup ();
+#else /* !JOB_CONTROL */
+	  cleanup_dead_jobs ();
+#endif /* !JOB_CONTROL */
+	}
+
+#if defined (READLINE)
+      if (no_line_editing && SHOULD_PROMPT())
+#else
+      if (SHOULD_PROMPT())
+#endif
+	print_prompt ();
+
+      if (bash_input.type == st_stream)
+	clearerr (stdin);
+
+      while (1)
+	{
+	  c = yy_getc ();
+
+	  /* Allow immediate exit if interrupted during input. */
+	  QUIT;
+
+	  if (c == '\0')
+	    {
+#if 0
+	      internal_warning ("shell_getc: ignored null byte in input");
+#endif
+	      /* If we get EOS while parsing a string, treat it as EOF so we
+		 don't just keep looping. Happens very rarely */
+	      if (bash_input.type == st_string)
+		{
+		  if (i == 0)
+		    shell_input_line_terminator = EOF;
+		  shell_input_line[i] = '\0';
+		  c = EOF;
+		  break;
+		}
+	      continue;
+	    }
+
+	  /* Theoretical overflow */
+	  /* If we can't put 256 bytes more into the buffer, allocate
+	     everything we can and fill it as full as we can. */
+	  /* XXX - we ignore rest of line using `truncating' flag */
+	  if (shell_input_line_size > (SIZE_MAX - 256))
+	    {
+	      size_t n;
+
+	      n = SIZE_MAX - i;	/* how much more can we put into the buffer? */
+	      if (n <= 2)	/* we have to save 1 for the newline added below */
+		{
+		  if (truncating == 0)
+		    internal_warning(_("shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line truncated"), shell_input_line_size, (unsigned long)SIZE_MAX);
+		  shell_input_line[i] = '\0';
+		  truncating = 1;
+		}
+	      if (shell_input_line_size < SIZE_MAX)
+		{
+		  shell_input_line_size = SIZE_MAX;
+		  shell_input_line = xrealloc (shell_input_line, shell_input_line_size);
+		}
+	    }
+	  else
+	    RESIZE_MALLOCED_BUFFER (shell_input_line, i, 2, shell_input_line_size, 256);
+
+	  if (c == EOF)
+	    {
+	      if (bash_input.type == st_stream)
+		clearerr (stdin);
+
+	      if (i == 0)
+		shell_input_line_terminator = EOF;
+
+	      shell_input_line[i] = '\0';
+	      break;
+	    }
+
+	  if (truncating == 0 || c == '\n')
+	    shell_input_line[i++] = c;
+
+	  if (c == '\n')
+	    {
+	      shell_input_line[--i] = '\0';
+	      current_command_line_count++;
+	      break;
+	    }
+
+	  last_was_backslash = last_was_backslash == 0 && c == '\\';
+	}
+
+      shell_input_line_index = 0;
+      shell_input_line_len = i;		/* == strlen (shell_input_line) */
+
+      set_line_mbstate ();
+
+#if defined (HISTORY)
+      if (remember_on_history && shell_input_line && shell_input_line[0])
+	{
+	  char *expansions;
+#  if defined (BANG_HISTORY)
+	  /* If the current delimiter is a single quote, we should not be
+	     performing history expansion, even if we're on a different
+	     line from the original single quote. */
+	  if (current_delimiter (dstack) == '\'')
+	    history_quoting_state = '\'';
+	  else if (current_delimiter (dstack) == '"')
+	    history_quoting_state = '"';
+	  else
+	    history_quoting_state = 0;
+#  endif
+	  /* Calling with a third argument of 1 allows remember_on_history to
+	     determine whether or not the line is saved to the history list */
+	  expansions = pre_process_line (shell_input_line, 1, 1);
+#  if defined (BANG_HISTORY)
+	  history_quoting_state = 0;
+#  endif
+	  if (expansions != shell_input_line)
+	    {
+	      free (shell_input_line);
+	      shell_input_line = expansions;
+	      shell_input_line_len = shell_input_line ?
+					strlen (shell_input_line) : 0;
+	      if (shell_input_line_len == 0)
+		current_command_line_count--;
+
+	      /* We have to force the xrealloc below because we don't know
+		 the true allocated size of shell_input_line anymore. */
+	      shell_input_line_size = shell_input_line_len;
+
+	      set_line_mbstate ();
+	    }
+	}
+      /* Try to do something intelligent with blank lines encountered while
+	 entering multi-line commands.  XXX - this is grotesque */
+      else if (remember_on_history && shell_input_line &&
+	       shell_input_line[0] == '\0' &&
+	       current_command_line_count > 1)
+	{
+	  if (current_delimiter (dstack))
+	    /* We know shell_input_line[0] == 0 and we're reading some sort of
+	       quoted string.  This means we've got a line consisting of only
+	       a newline in a quoted string.  We want to make sure this line
+	       gets added to the history. */
+	    maybe_add_history (shell_input_line);
+	  else
+	    {
+	      char *hdcs;
+	      hdcs = history_delimiting_chars (shell_input_line);
+	      if (hdcs && hdcs[0] == ';')
+		maybe_add_history (shell_input_line);
+	    }
+	}
+
+#endif /* HISTORY */
+
+      if (shell_input_line)
+	{
+	  /* Lines that signify the end of the shell's input should not be
+	     echoed.  We should not echo lines while parsing command
+	     substitutions with recursive calls into the parsing engine; those
+	     should only be echoed once when we read the word.  That is the
+	     reason for the test against shell_eof_token, which is set to a
+	     right paren when parsing the contents of command substitutions. */
+	  if (echo_input_at_read && (shell_input_line[0] ||
+				       shell_input_line_terminator != EOF) &&
+				     shell_eof_token == 0)
+	    fprintf (stderr, "%s\n", shell_input_line);
+	}
+      else
+	{
+	  shell_input_line_size = 0;
+	  prompt_string_pointer = &current_prompt_string;
+	  if (SHOULD_PROMPT ())
+	    prompt_again ();
+	  goto restart_read;
+	}
+
+      /* Add the newline to the end of this string, iff the string does
+	 not already end in an EOF character.  */
+      if (shell_input_line_terminator != EOF)
+	{
+	  if (shell_input_line_size < SIZE_MAX-3 && (shell_input_line_len+3 > shell_input_line_size))
+	    shell_input_line = (char *)xrealloc (shell_input_line,
+					1 + (shell_input_line_size += 2));
+
+	  /* Don't add a newline to a string that ends with a backslash if we're
+	     going to be removing quoted newlines, since that will eat the
+	     backslash.  Add another backslash instead (will be removed by
+	     word expansion). */
+	  if (bash_input.type == st_string && expanding_alias() == 0 && last_was_backslash && c == EOF && remove_quoted_newline)
+	    shell_input_line[shell_input_line_len] = '\\';
+	  else
+	    shell_input_line[shell_input_line_len] = '\n';
+	  shell_input_line[shell_input_line_len + 1] = '\0';
+
+#if 0
+	  set_line_mbstate ();		/* XXX - this is wasteful */
+#else
+#  if defined (HANDLE_MULTIBYTE)
+	  /* This is kind of an abstraction violation, but there's no need to
+	     go through the entire shell_input_line again with a call to
+	     set_line_mbstate(). */
+	  if (shell_input_line_len + 2 > shell_input_line_propsize)
+	    {
+	      shell_input_line_propsize = shell_input_line_len + 2;
+	      shell_input_line_property = (char *)xrealloc (shell_input_line_property,
+							    shell_input_line_propsize);
+	    }
+	  shell_input_line_property[shell_input_line_len] = 1;
+#  endif
+#endif
+	}
+    }
+
+next_alias_char:
+  if (shell_input_line_index == 0)
+    unquoted_backslash = 0;
+
+  uc = shell_input_line[shell_input_line_index];
+
+  if (uc)
+    {
+      unquoted_backslash = unquoted_backslash == 0 && uc == '\\';
+      shell_input_line_index++;
+    }
+
+#if defined (ALIAS) || defined (DPAREN_ARITHMETIC)
+  /* If UC is NULL, we have reached the end of the current input string.  If
+     pushed_string_list is non-empty, it's time to pop to the previous string
+     because we have fully consumed the result of the last alias expansion.
+     Do it transparently; just return the next character of the string popped
+     to. */
+  /* If pushed_string_list != 0 but pushed_string_list->expander == 0 (not
+     currently tested) and the flags value is not PSH_SOURCE, we are not
+     parsing an alias, we have just saved one (push_string, when called by
+     the parse_dparen code) In this case, just go on as well.  The PSH_SOURCE
+     case is handled below. */
+
+  /* If we're at the end of an alias expansion add a space to make sure that
+     the alias remains marked as being in use while we expand its last word.
+     This makes sure that pop_string doesn't mark the alias as not in use
+     before the string resulting from the alias expansion is tokenized and
+     checked for alias expansion, preventing recursion.  At this point, the
+     last character in shell_input_line is the last character of the alias
+     expansion.  We test that last character to determine whether or not to
+     return the space that will delimit the token and postpone the pop_string.
+     This set of conditions duplicates what used to be in mk_alexpansion ()
+     below, with the addition that we don't add a space if we're currently
+     reading a quoted string or in a shell comment. */
+#ifndef OLD_ALIAS_HACK
+  if (uc == 0 && pushed_string_list && pushed_string_list->flags != PSH_SOURCE &&
+      pushed_string_list->flags != PSH_DPAREN &&
+      (parser_state & PST_COMMENT) == 0 &&
+      (parser_state & PST_ENDALIAS) == 0 &&	/* only once */
+      shell_input_line_index > 0 &&
+      shellblank (shell_input_line[shell_input_line_index-1]) == 0 &&
+      shell_input_line[shell_input_line_index-1] != '\n' &&
+      unquoted_backslash == 0 &&
+      shellmeta (shell_input_line[shell_input_line_index-1]) == 0 &&
+      (current_delimiter (dstack) != '\'' && current_delimiter (dstack) != '"'))
+    {
+      parser_state |= PST_ENDALIAS;
+      return ' ';	/* END_ALIAS */
+    }
+#endif
+
+pop_alias:
+  /* This case works for PSH_DPAREN as well */
+  if (uc == 0 && pushed_string_list && pushed_string_list->flags != PSH_SOURCE)
+    {
+      parser_state &= ~PST_ENDALIAS;
+      pop_string ();
+      uc = shell_input_line[shell_input_line_index];
+      if (uc)
+	shell_input_line_index++;
+    }
+#endif /* ALIAS || DPAREN_ARITHMETIC */
+
+  if MBTEST(uc == '\\' && remove_quoted_newline && shell_input_line[shell_input_line_index] == '\n')
+    {
+	if (SHOULD_PROMPT ())
+	  prompt_again ();
+	line_number++;
+
+	/* What do we do here if we're expanding an alias whose definition
+	   includes an escaped newline?  If that's the last character in the
+	   alias expansion, we just pop the pushed string list (recall that
+	   we inhibit the appending of a space if newline is the last
+	   character).  If it's not the last character, we need to consume the
+	   quoted newline and move to the next character in the expansion. */
+#if defined (ALIAS)
+	if (expanding_alias () && shell_input_line[shell_input_line_index+1] == '\0')
+	  {
+	    uc = 0;
+	    goto pop_alias;
+	  }
+	else if (expanding_alias () && shell_input_line[shell_input_line_index+1] != '\0')
+	  {
+	    shell_input_line_index++;	/* skip newline */
+	    goto next_alias_char;	/* and get next character */
+	  }
+	else
+#endif 
+	  goto restart_read;
+    }
+
+  if (uc == 0 && shell_input_line_terminator == EOF)
+    return ((shell_input_line_index != 0) ? '\n' : EOF);
+
+#if defined (ALIAS) || defined (DPAREN_ARITHMETIC)
+  /* We already know that we are not parsing an alias expansion because of the
+     check for expanding_alias() above.  This knows how parse_and_execute
+     handles switching to st_string input while an alias is being expanded,
+     hence the check for pushed_string_list without pushed_string_list->expander
+     and the check for PSH_SOURCE as pushed_string_list->flags.
+     parse_and_execute and parse_string both change the input type to st_string
+     and place the string to be parsed and executed into location.string, so
+     we should not stop reading that until the pointer is '\0'.
+     The check for shell_input_line_terminator may be superfluous.
+
+     This solves the problem of `.' inside a multi-line alias with embedded
+     newlines executing things out of order. */
+  if (uc == 0 && bash_input.type == st_string && *bash_input.location.string &&
+      pushed_string_list && pushed_string_list->flags == PSH_SOURCE &&
+      shell_input_line_terminator == 0)
+    {
+      shell_input_line_index = 0;
+      goto restart_read;
+    }
+#endif
+
+  return (uc);
+}
+
+/* Put C back into the input for the shell.  This might need changes for
+   HANDLE_MULTIBYTE around EOLs.  Since we (currently) never push back a
+   character different than we read, shell_input_line_property doesn't need
+   to change when manipulating shell_input_line.  The define for
+   last_shell_getc_is_singlebyte should take care of it, though. */
+static void
+shell_ungetc (c)
+     int c;
+{
+  if (shell_input_line && shell_input_line_index)
+    shell_input_line[--shell_input_line_index] = c;
+  else
+    eol_ungetc_lookahead = c;
+}
+
+char *
+parser_remaining_input ()
+{
+  if (shell_input_line == 0)
+    return 0;
+  if ((int)shell_input_line_index < 0 || shell_input_line_index >= shell_input_line_len)
+    return "";	/* XXX */
+  return (shell_input_line + shell_input_line_index);
+}
+
+#ifdef INCLUDE_UNUSED
+/* Back the input pointer up by one, effectively `ungetting' a character. */
+static void
+shell_ungetchar ()
+{
+  if (shell_input_line && shell_input_line_index)
+    shell_input_line_index--;
+}
+#endif
+
+/* Discard input until CHARACTER is seen, then push that character back
+   onto the input stream. */
+static void
+discard_until (character)
+     int character;
+{
+  int c;
+
+  while ((c = shell_getc (0)) != EOF && c != character)
+    ;
+
+  if (c != EOF)
+    shell_ungetc (c);
+}
+
+void
+execute_variable_command (command, vname)
+     char *command, *vname;
+{
+  char *last_lastarg;
+  sh_parser_state_t ps;
+
+  save_parser_state (&ps);
+  last_lastarg = get_string_value ("_");
+  if (last_lastarg)
+    last_lastarg = savestring (last_lastarg);
+
+  parse_and_execute (savestring (command), vname, SEVAL_NONINT|SEVAL_NOHIST);
+
+  restore_parser_state (&ps);
+  bind_variable ("_", last_lastarg, 0);
+  FREE (last_lastarg);
+
+  if (token_to_read == '\n')	/* reset_parser was called */
+    token_to_read = 0;
+}
+
+void
+push_token (x)
+     int x;
+{
+  two_tokens_ago = token_before_that;
+  token_before_that = last_read_token;
+  last_read_token = current_token;
+
+  current_token = x;
+}
+
+/* Place to remember the token.  We try to keep the buffer
+   at a reasonable size, but it can grow. */
+static char *token = (char *)NULL;
+
+/* Current size of the token buffer. */
+static int token_buffer_size;
+
+/* Command to read_token () explaining what we want it to do. */
+#define READ 0
+#define RESET 1
+#define prompt_is_ps1 \
+      (!prompt_string_pointer || prompt_string_pointer == &ps1_prompt)
+
+/* Function for yyparse to call.  yylex keeps track of
+   the last two tokens read, and calls read_token.  */
+static int
+yylex ()
+{
+  if (interactive && (current_token == 0 || current_token == '\n'))
+    {
+      /* Before we print a prompt, we might have to check mailboxes.
+	 We do this only if it is time to do so. Notice that only here
+	 is the mail alarm reset; nothing takes place in check_mail ()
+	 except the checking of mail.  Please don't change this. */
+      if (prompt_is_ps1 && parse_and_execute_level == 0 && time_to_check_mail ())
+	{
+	  check_mail ();
+	  reset_mail_timer ();
+	}
+
+      /* Avoid printing a prompt if we're not going to read anything, e.g.
+	 after resetting the parser with read_token (RESET). */
+      if (token_to_read == 0 && SHOULD_PROMPT ())
+	prompt_again ();
+    }
+
+  two_tokens_ago = token_before_that;
+  token_before_that = last_read_token;
+  last_read_token = current_token;
+  current_token = read_token (READ);
+
+  if ((parser_state & PST_EOFTOKEN) && current_token == shell_eof_token)
+    {
+      current_token = yacc_EOF;
+      if (bash_input.type == st_string)
+	rewind_input_string ();
+    }
+  parser_state &= ~PST_EOFTOKEN;	/* ??? */
+
+  return (current_token);
+}
+
+/* When non-zero, we have read the required tokens
+   which allow ESAC to be the next one read. */
+static int esacs_needed_count;
+
+/* When non-zero, we can read IN as an acceptable token, regardless of how
+   many newlines we read. */
+static int expecting_in_token;
+
+static void
+push_heredoc (r)
+     REDIRECT *r;
+{
+  if (need_here_doc >= HEREDOC_MAX)
+    {
+      last_command_exit_value = EX_BADUSAGE;
+      need_here_doc = 0;
+      report_syntax_error (_("maximum here-document count exceeded"));
+      reset_parser ();
+      exit_shell (last_command_exit_value);
+    }
+  redir_stack[need_here_doc++] = r;
+}
+
+void
+gather_here_documents ()
+{
+  int r;
+
+  r = 0;
+  here_doc_first_line = 1;
+  while (need_here_doc > 0)
+    {
+      parser_state |= PST_HEREDOC;
+      make_here_document (redir_stack[r++], line_number);
+      parser_state &= ~PST_HEREDOC;
+      need_here_doc--;
+      redir_stack[r - 1] = 0;		/* XXX */
+    }
+  here_doc_first_line = 0;		/* just in case */
+}
+
+/* When non-zero, an open-brace used to create a group is awaiting a close
+   brace partner. */
+static int open_brace_count;
+
+/* In the following three macros, `token' is always last_read_token */
+
+/* Are we in the middle of parsing a redirection where we are about to read
+   a word?  This is used to make sure alias expansion doesn't happen in the
+   middle of a redirection, even though we're parsing a simple command. */
+#define parsing_redirection(token) \
+  (token == '<' || token == '>' || \
+   token == GREATER_GREATER || token == GREATER_BAR || \
+   token == LESS_GREATER || token == LESS_LESS_MINUS || \
+   token == LESS_LESS || token == LESS_LESS_LESS || \
+   token == LESS_AND || token == GREATER_AND || token == AND_GREATER)
+
+/* Is `token' one that will allow a WORD to be read in a command position?
+   We can read a simple command name on which we should attempt alias expansion
+   or we can read an assignment statement. */
+#define command_token_position(token) \
+  (((token) == ASSIGNMENT_WORD) || \
+   ((parser_state&PST_REDIRLIST) && parsing_redirection(token) == 0) || \
+   ((token) != SEMI_SEMI && (token) != SEMI_AND && (token) != SEMI_SEMI_AND && reserved_word_acceptable(token)))
+
+/* Are we in a position where we can read an assignment statement? */
+#define assignment_acceptable(token) \
+  (command_token_position(token) && ((parser_state & PST_CASEPAT) == 0))
+
+/* Check to see if TOKEN is a reserved word and return the token
+   value if it is. */
+#define CHECK_FOR_RESERVED_WORD(tok) \
+  do { \
+    if (!dollar_present && !quoted && \
+	reserved_word_acceptable (last_read_token)) \
+      { \
+	int i; \
+	for (i = 0; word_token_alist[i].word != (char *)NULL; i++) \
+	  if (STREQ (tok, word_token_alist[i].word)) \
+	    { \
+	      if ((parser_state & PST_CASEPAT) && (word_token_alist[i].token != ESAC)) \
+		break; \
+	      if (word_token_alist[i].token == TIME && time_command_acceptable () == 0) \
+		break; \
+	      if ((parser_state & PST_CASEPAT) && last_read_token == '|' && word_token_alist[i].token == ESAC) \
+		break; /* Posix grammar rule 4 */ \
+	      if (word_token_alist[i].token == ESAC) \
+		parser_state &= ~(PST_CASEPAT|PST_CASESTMT); \
+	      else if (word_token_alist[i].token == CASE) \
+		parser_state |= PST_CASESTMT; \
+	      else if (word_token_alist[i].token == COND_END) \
+		parser_state &= ~(PST_CONDCMD|PST_CONDEXPR); \
+	      else if (word_token_alist[i].token == COND_START) \
+		parser_state |= PST_CONDCMD; \
+	      else if (word_token_alist[i].token == '{') \
+		open_brace_count++; \
+	      else if (word_token_alist[i].token == '}' && open_brace_count) \
+		open_brace_count--; \
+	      return (word_token_alist[i].token); \
+	    } \
+      } \
+  } while (0)
+
+#if defined (ALIAS)
+
+    /* OK, we have a token.  Let's try to alias expand it, if (and only if)
+       it's eligible.
+
+       It is eligible for expansion if EXPAND_ALIASES is set, and
+       the token is unquoted and the last token read was a command
+       separator (or expand_next_token is set), and we are currently
+       processing an alias (pushed_string_list is non-empty) and this
+       token is not the same as the current or any previously
+       processed alias.
+
+       Special cases that disqualify:
+	 In a pattern list in a case statement (parser_state & PST_CASEPAT). */
+
+static char *
+mk_alexpansion (s)
+     char *s;
+{
+  int l;
+  char *r;
+
+  l = strlen (s);
+  r = xmalloc (l + 2);
+  strcpy (r, s);
+#ifdef OLD_ALIAS_HACK
+  /* If the last character in the alias is a newline, don't add a trailing
+     space to the expansion.  Works with shell_getc above. */
+  /* Need to do something about the case where the alias expansion contains
+     an unmatched quoted string, since appending this space affects the
+     subsequent output. */
+  if (l > 0 && r[l - 1] != ' ' && r[l - 1] != '\n' && shellmeta(r[l - 1]) == 0)
+    r[l++] = ' ';
+#endif
+  r[l] = '\0';
+  return r;
+}
+
+static int
+alias_expand_token (tokstr)
+     char *tokstr;
+{
+  char *expanded;
+  alias_t *ap;
+
+  if (((parser_state & PST_ALEXPNEXT) || command_token_position (last_read_token)) &&
+	(parser_state & PST_CASEPAT) == 0)
+    {
+      ap = find_alias (tokstr);
+
+      /* Currently expanding this token. */
+      if (ap && (ap->flags & AL_BEINGEXPANDED))
+	return (NO_EXPANSION);
+
+#ifdef OLD_ALIAS_HACK
+      /* mk_alexpansion puts an extra space on the end of the alias expansion,
+	 so the lookahead by the parser works right (the alias needs to remain
+	 `in use' while parsing its last word to avoid alias recursion for
+	 something like "alias echo=echo").  If this gets changed, make sure
+	 the code in shell_getc that deals with reaching the end of an
+	 expanded alias is changed with it. */
+#endif
+      expanded = ap ? mk_alexpansion (ap->value) : (char *)NULL;
+
+      if (expanded)
+	{
+	  push_string (expanded, ap->flags & AL_EXPANDNEXT, ap);
+	  return (RE_READ_TOKEN);
+	}
+      else
+	/* This is an eligible token that does not have an expansion. */
+	return (NO_EXPANSION);
+    }
+  return (NO_EXPANSION);
+}
+#endif /* ALIAS */
+
+static int
+time_command_acceptable ()
+{
+#if defined (COMMAND_TIMING)
+  int i;
+
+  if (posixly_correct && shell_compatibility_level > 41)
+    {
+      /* Quick check of the rest of the line to find the next token.  If it
+	 begins with a `-', Posix says to not return `time' as the token.
+	 This was interp 267. */
+      i = shell_input_line_index;
+      while (i < shell_input_line_len && (shell_input_line[i] == ' ' || shell_input_line[i] == '\t'))
+        i++;
+      if (shell_input_line[i] == '-')
+	return 0;
+    }
+
+  switch (last_read_token)
+    {
+    case 0:
+    case ';':
+    case '\n':
+      if (token_before_that == '|')
+	return (0);
+      /* FALLTHROUGH */
+    case AND_AND:
+    case OR_OR:
+    case '&':
+    case WHILE:
+    case DO:
+    case UNTIL:
+    case IF:
+    case THEN:
+    case ELIF:
+    case ELSE:
+    case '{':		/* } */
+    case '(':		/* )( */
+    case ')':		/* only valid in case statement */
+    case BANG:		/* ! time pipeline */
+    case TIME:		/* time time pipeline */
+    case TIMEOPT:	/* time -p time pipeline */
+    case TIMEIGN:	/* time -p -- ... */
+      return 1;
+    default:
+      return 0;
+    }
+#else
+  return 0;
+#endif /* COMMAND_TIMING */
+}
+
+/* Handle special cases of token recognition:
+	IN is recognized if the last token was WORD and the token
+	before that was FOR or CASE or SELECT.
+
+	DO is recognized if the last token was WORD and the token
+	before that was FOR or SELECT.
+
+	ESAC is recognized if the last token caused `esacs_needed_count'
+	to be set
+
+	`{' is recognized if the last token as WORD and the token
+	before that was FUNCTION, or if we just parsed an arithmetic
+	`for' command.
+
+	`}' is recognized if there is an unclosed `{' present.
+
+	`-p' is returned as TIMEOPT if the last read token was TIME.
+	`--' is returned as TIMEIGN if the last read token was TIME or TIMEOPT.
+
+	']]' is returned as COND_END if the parser is currently parsing
+	a conditional expression ((parser_state & PST_CONDEXPR) != 0)
+
+	`time' is returned as TIME if and only if it is immediately
+	preceded by one of `;', `\n', `||', `&&', or `&'.
+*/
+
+static int
+special_case_tokens (tokstr)
+     char *tokstr;
+{
+  /* Posix grammar rule 6 */
+  if ((last_read_token == WORD) &&
+#if defined (SELECT_COMMAND)
+      ((token_before_that == FOR) || (token_before_that == CASE) || (token_before_that == SELECT)) &&
+#else
+      ((token_before_that == FOR) || (token_before_that == CASE)) &&
+#endif
+      (tokstr[0] == 'i' && tokstr[1] == 'n' && tokstr[2] == 0))
+    {
+      if (token_before_that == CASE)
+	{
+	  parser_state |= PST_CASEPAT;
+	  esacs_needed_count++;
+	}
+      if (expecting_in_token)
+	expecting_in_token--;
+      return (IN);
+    }
+
+  /* XXX - leaving above code intact for now, but it should eventually be
+     removed in favor of this clause. */
+  /* Posix grammar rule 6 */
+  if (expecting_in_token && (last_read_token == WORD || last_read_token == '\n') &&
+      (tokstr[0] == 'i' && tokstr[1] == 'n' && tokstr[2] == 0))
+    {
+      if (parser_state & PST_CASESTMT)
+	{
+	  parser_state |= PST_CASEPAT;
+	  esacs_needed_count++;
+	}
+      expecting_in_token--;
+      return (IN);
+    }
+  /* Posix grammar rule 6, third word in FOR: for i; do command-list; done */
+  else if (expecting_in_token && (last_read_token == '\n' || last_read_token == ';') &&
+    (tokstr[0] == 'd' && tokstr[1] == 'o' && tokstr[2] == '\0'))
+    {
+      expecting_in_token--;
+      return (DO);
+    }
+
+  /* for i do; command-list; done */
+  if (last_read_token == WORD &&
+#if defined (SELECT_COMMAND)
+      (token_before_that == FOR || token_before_that == SELECT) &&
+#else
+      (token_before_that == FOR) &&
+#endif
+      (tokstr[0] == 'd' && tokstr[1] == 'o' && tokstr[2] == '\0'))
+    {
+      if (expecting_in_token)
+	expecting_in_token--;
+      return (DO);
+    }
+
+  /* Ditto for ESAC in the CASE case.
+     Specifically, this handles "case word in esac", which is a legal
+     construct, certainly because someone will pass an empty arg to the
+     case construct, and we don't want it to barf.  Of course, we should
+     insist that the case construct has at least one pattern in it, but
+     the designers disagree. */
+  if (esacs_needed_count)
+    {
+      if (last_read_token == IN && STREQ (tokstr, "esac"))
+	{
+	  esacs_needed_count--;
+	  parser_state &= ~PST_CASEPAT;
+	  return (ESAC);
+	}
+    }
+
+  /* The start of a shell function definition. */
+  if (parser_state & PST_ALLOWOPNBRC)
+    {
+      parser_state &= ~PST_ALLOWOPNBRC;
+      if (tokstr[0] == '{' && tokstr[1] == '\0')		/* } */
+	{
+	  open_brace_count++;
+	  function_bstart = line_number;
+	  return ('{');					/* } */
+	}
+    }
+
+  /* We allow a `do' after a for ((...)) without an intervening
+     list_terminator */
+  if (last_read_token == ARITH_FOR_EXPRS && tokstr[0] == 'd' && tokstr[1] == 'o' && !tokstr[2])
+    return (DO);
+  if (last_read_token == ARITH_FOR_EXPRS && tokstr[0] == '{' && tokstr[1] == '\0')	/* } */
+    {
+      open_brace_count++;
+      return ('{');			/* } */
+    }
+
+  if (open_brace_count && reserved_word_acceptable (last_read_token) && tokstr[0] == '}' && !tokstr[1])
+    {
+      open_brace_count--;		/* { */
+      return ('}');
+    }
+
+#if defined (COMMAND_TIMING)
+  /* Handle -p after `time'. */
+  if (last_read_token == TIME && tokstr[0] == '-' && tokstr[1] == 'p' && !tokstr[2])
+    return (TIMEOPT);
+  /* Handle -- after `time'. */
+  if (last_read_token == TIME && tokstr[0] == '-' && tokstr[1] == '-' && !tokstr[2])
+    return (TIMEIGN);
+  /* Handle -- after `time -p'. */
+  if (last_read_token == TIMEOPT && tokstr[0] == '-' && tokstr[1] == '-' && !tokstr[2])
+    return (TIMEIGN);
+#endif
+
+#if defined (COND_COMMAND) /* [[ */
+  if ((parser_state & PST_CONDEXPR) && tokstr[0] == ']' && tokstr[1] == ']' && tokstr[2] == '\0')
+    return (COND_END);
+#endif
+
+  return (-1);
+}
+
+/* Called from shell.c when Control-C is typed at top level.  Or
+   by the error rule at top level. */
+void
+reset_parser ()
+{
+  dstack.delimiter_depth = 0;	/* No delimiters found so far. */
+  open_brace_count = 0;
+
+#if defined (EXTENDED_GLOB)
+  /* Reset to global value of extended glob */
+  if (parser_state & PST_EXTPAT)
+    extended_glob = global_extglob;
+#endif
+
+  parser_state = 0;
+  here_doc_first_line = 0;
+
+#if defined (ALIAS) || defined (DPAREN_ARITHMETIC)
+  if (pushed_string_list)
+    free_string_list ();
+#endif /* ALIAS || DPAREN_ARITHMETIC */
+
+  /* This is where we resynchronize to the next newline on error/reset */
+  if (shell_input_line)
+    {
+      free (shell_input_line);
+      shell_input_line = (char *)NULL;
+      shell_input_line_size = shell_input_line_index = 0;
+    }
+
+  FREE (word_desc_to_read);
+  word_desc_to_read = (WORD_DESC *)NULL;
+
+  eol_ungetc_lookahead = 0;
+
+  current_token = '\n';		/* XXX */
+  last_read_token = '\n';
+  token_to_read = '\n';
+}
+
+void
+reset_readahead_token ()
+{
+  if (token_to_read == '\n')
+    token_to_read = 0;
+}
+
+/* Read the next token.  Command can be READ (normal operation) or
+   RESET (to normalize state). */
+static int
+read_token (command)
+     int command;
+{
+  int character;		/* Current character. */
+  int peek_char;		/* Temporary look-ahead character. */
+  int result;			/* The thing to return. */
+
+  if (command == RESET)
+    {
+      reset_parser ();
+      return ('\n');
+    }
+
+  if (token_to_read)
+    {
+      result = token_to_read;
+      if (token_to_read == WORD || token_to_read == ASSIGNMENT_WORD)
+	{
+	  yylval.word = word_desc_to_read;
+	  word_desc_to_read = (WORD_DESC *)NULL;
+	}
+      token_to_read = 0;
+      return (result);
+    }
+
+#if defined (COND_COMMAND)
+  if ((parser_state & (PST_CONDCMD|PST_CONDEXPR)) == PST_CONDCMD)
+    {
+      cond_lineno = line_number;
+      parser_state |= PST_CONDEXPR;
+      yylval.command = parse_cond_command ();
+      if (cond_token != COND_END)
+	{
+	  cond_error ();
+	  return (-1);
+	}
+      token_to_read = COND_END;
+      parser_state &= ~(PST_CONDEXPR|PST_CONDCMD);
+      return (COND_CMD);
+    }
+#endif
+
+#if defined (ALIAS)
+  /* This is a place to jump back to once we have successfully expanded a
+     token with an alias and pushed the string with push_string () */
+ re_read_token:
+#endif /* ALIAS */
+
+  /* Read a single word from input.  Start by skipping blanks. */
+  while ((character = shell_getc (1)) != EOF && shellblank (character))
+    ;
+
+  if (character == EOF)
+    {
+      EOF_Reached = 1;
+      return (yacc_EOF);
+    }
+
+  /* If we hit the end of the string and we're not expanding an alias (e.g.,
+     we are eval'ing a string that is an incomplete command), return EOF */
+  if (character == '\0' && bash_input.type == st_string && expanding_alias() == 0)
+    {
+#if defined (DEBUG)
+itrace("shell_getc: bash_input.location.string = `%s'", bash_input.location.string);
+#endif
+      EOF_Reached = 1;
+      return (yacc_EOF);
+    }
+
+  if MBTEST(character == '#' && (!interactive || interactive_comments))
+    {
+      /* A comment.  Discard until EOL or EOF, and then return a newline. */
+      parser_state |= PST_COMMENT;
+      discard_until ('\n');
+      shell_getc (0);
+      parser_state &= ~PST_COMMENT;
+      character = '\n';	/* this will take the next if statement and return. */
+    }
+
+  if (character == '\n')
+    {
+      /* If we're about to return an unquoted newline, we can go and collect
+	 the text of any pending here document. */
+      if (need_here_doc)
+	gather_here_documents ();
+
+#if defined (ALIAS)
+      parser_state &= ~PST_ALEXPNEXT;
+#endif /* ALIAS */
+
+      parser_state &= ~PST_ASSIGNOK;
+
+      return (character);
+    }
+
+  if (parser_state & PST_REGEXP)
+    goto tokword;
+
+  /* Shell meta-characters. */
+  if MBTEST(shellmeta (character) && ((parser_state & PST_DBLPAREN) == 0))
+    {
+#if defined (ALIAS)
+      /* Turn off alias tokenization iff this character sequence would
+	 not leave us ready to read a command. */
+      if (character == '<' || character == '>')
+	parser_state &= ~PST_ALEXPNEXT;
+#endif /* ALIAS */
+
+      parser_state &= ~PST_ASSIGNOK;
+
+      /* If we are parsing a command substitution and we have read a character
+	 that marks the end of it, don't bother to skip over quoted newlines
+	 when we read the next token. We're just interested in a character
+	 that will turn this into a two-character token, so we let the higher
+	 layers deal with quoted newlines following the command substitution. */
+      if ((parser_state & PST_CMDSUBST) && character == shell_eof_token)
+	peek_char = shell_getc (0);
+      else
+	peek_char = shell_getc (1);
+
+      if (character == peek_char)
+	{
+	  switch (character)
+	    {
+	    case '<':
+	      /* If '<' then we could be at "<<" or at "<<-".  We have to
+		 look ahead one more character. */
+	      peek_char = shell_getc (1);
+	      if MBTEST(peek_char == '-')
+		return (LESS_LESS_MINUS);
+	      else if MBTEST(peek_char == '<')
+		return (LESS_LESS_LESS);
+	      else
+		{
+		  shell_ungetc (peek_char);
+		  return (LESS_LESS);
+		}
+
+	    case '>':
+	      return (GREATER_GREATER);
+
+	    case ';':
+	      parser_state |= PST_CASEPAT;
+#if defined (ALIAS)
+	      parser_state &= ~PST_ALEXPNEXT;
+#endif /* ALIAS */
+
+	      peek_char = shell_getc (1);
+	      if MBTEST(peek_char == '&')
+		return (SEMI_SEMI_AND);
+	      else
+		{
+		  shell_ungetc (peek_char);
+		  return (SEMI_SEMI);
+		}
+
+	    case '&':
+	      return (AND_AND);
+
+	    case '|':
+	      return (OR_OR);
+
+#if defined (DPAREN_ARITHMETIC) || defined (ARITH_FOR_COMMAND)
+	    case '(':		/* ) */
+	      result = parse_dparen (character);
+	      if (result == -2)
+	        break;
+	      else
+	        return result;
+#endif
+	    }
+	}
+      else if MBTEST(character == '<' && peek_char == '&')
+	return (LESS_AND);
+      else if MBTEST(character == '>' && peek_char == '&')
+	return (GREATER_AND);
+      else if MBTEST(character == '<' && peek_char == '>')
+	return (LESS_GREATER);
+      else if MBTEST(character == '>' && peek_char == '|')
+	return (GREATER_BAR);
+      else if MBTEST(character == '&' && peek_char == '>')
+	{
+	  peek_char = shell_getc (1);
+	  if MBTEST(peek_char == '>')
+	    return (AND_GREATER_GREATER);
+	  else
+	    {
+	      shell_ungetc (peek_char);
+	      return (AND_GREATER);
+	    }
+	}
+      else if MBTEST(character == '|' && peek_char == '&')
+	return (BAR_AND);
+      else if MBTEST(character == ';' && peek_char == '&')
+	{
+	  parser_state |= PST_CASEPAT;
+#if defined (ALIAS)
+	  parser_state &= ~PST_ALEXPNEXT;
+#endif /* ALIAS */
+	  return (SEMI_AND);
+	}
+
+      shell_ungetc (peek_char);
+
+      /* If we look like we are reading the start of a function
+	 definition, then let the reader know about it so that
+	 we will do the right thing with `{'. */
+      if MBTEST(character == ')' && last_read_token == '(' && token_before_that == WORD)
+	{
+	  parser_state |= PST_ALLOWOPNBRC;
+#if defined (ALIAS)
+	  parser_state &= ~PST_ALEXPNEXT;
+#endif /* ALIAS */
+	  function_dstart = line_number;
+	}
+
+      /* case pattern lists may be preceded by an optional left paren.  If
+	 we're not trying to parse a case pattern list, the left paren
+	 indicates a subshell. */
+      if MBTEST(character == '(' && (parser_state & PST_CASEPAT) == 0) /* ) */
+	parser_state |= PST_SUBSHELL;
+      /*(*/
+      else if MBTEST((parser_state & PST_CASEPAT) && character == ')')
+	parser_state &= ~PST_CASEPAT;
+      /*(*/
+      else if MBTEST((parser_state & PST_SUBSHELL) && character == ')')
+	parser_state &= ~PST_SUBSHELL;
+
+#if defined (PROCESS_SUBSTITUTION)
+      /* Check for the constructs which introduce process substitution.
+	 Shells running in `posix mode' don't do process substitution. */
+      if MBTEST((character != '>' && character != '<') || peek_char != '(') /*)*/
+#endif /* PROCESS_SUBSTITUTION */
+	return (character);
+    }
+
+  /* Hack <&- (close stdin) case.  Also <&N- (dup and close). */
+  if MBTEST(character == '-' && (last_read_token == LESS_AND || last_read_token == GREATER_AND))
+    return (character);
+
+tokword:
+  /* Okay, if we got this far, we have to read a word.  Read one,
+     and then check it against the known ones. */
+  result = read_token_word (character);
+#if defined (ALIAS)
+  if (result == RE_READ_TOKEN)
+    goto re_read_token;
+#endif
+  return result;
+}
+
+/*
+ * Match a $(...) or other grouping construct.  This has to handle embedded
+ * quoted strings ('', ``, "") and nested constructs.  It also must handle
+ * reprompting the user, if necessary, after reading a newline, and returning
+ * correct error values if it reads EOF.
+ */
+#define P_FIRSTCLOSE	0x0001
+#define P_ALLOWESC	0x0002
+#define P_DQUOTE	0x0004
+#define P_COMMAND	0x0008	/* parsing a command, so look for comments */
+#define P_BACKQUOTE	0x0010	/* parsing a backquoted command substitution */
+#define P_ARRAYSUB	0x0020	/* parsing a [...] array subscript for assignment */
+#define P_DOLBRACE	0x0040	/* parsing a ${...} construct */
+
+/* Lexical state while parsing a grouping construct or $(...). */
+#define LEX_WASDOL	0x0001
+#define LEX_CKCOMMENT	0x0002
+#define LEX_INCOMMENT	0x0004
+#define LEX_PASSNEXT	0x0008
+#define LEX_RESWDOK	0x0010
+#define LEX_CKCASE	0x0020
+#define LEX_INCASE	0x0040
+#define LEX_INHEREDOC	0x0080
+#define LEX_HEREDELIM	0x0100		/* reading here-doc delimiter */
+#define LEX_STRIPDOC	0x0200		/* <<- strip tabs from here doc delim */
+#define LEX_QUOTEDDOC	0x0400		/* here doc with quoted delim */
+#define LEX_INWORD	0x0800
+#define LEX_GTLT	0x1000
+
+#define COMSUB_META(ch)		((ch) == ';' || (ch) == '&' || (ch) == '|')
+
+#define CHECK_NESTRET_ERROR() \
+  do { \
+    if (nestret == &matched_pair_error) \
+      { \
+	free (ret); \
+	return &matched_pair_error; \
+      } \
+  } while (0)
+
+#define APPEND_NESTRET() \
+  do { \
+    if (nestlen) \
+      { \
+	RESIZE_MALLOCED_BUFFER (ret, retind, nestlen, retsize, 64); \
+	strcpy (ret + retind, nestret); \
+	retind += nestlen; \
+      } \
+  } while (0)
+
+static char matched_pair_error;
+
+static char *
+parse_matched_pair (qc, open, close, lenp, flags)
+     int qc;	/* `"' if this construct is within double quotes */
+     int open, close;
+     int *lenp, flags;
+{
+  int count, ch, prevch, tflags;
+  int nestlen, ttranslen, start_lineno;
+  char *ret, *nestret, *ttrans;
+  int retind, retsize, rflags;
+  int dolbrace_state;
+
+  dolbrace_state = (flags & P_DOLBRACE) ? DOLBRACE_PARAM : 0;
+
+/*itrace("parse_matched_pair[%d]: open = %c close = %c flags = %d", line_number, open, close, flags);*/
+  count = 1;
+  tflags = 0;
+
+  if ((flags & P_COMMAND) && qc != '`' && qc != '\'' && qc != '"' && (flags & P_DQUOTE) == 0)
+    tflags |= LEX_CKCOMMENT;
+
+  /* RFLAGS is the set of flags we want to pass to recursive calls. */
+  rflags = (qc == '"') ? P_DQUOTE : (flags & P_DQUOTE);
+
+  ret = (char *)xmalloc (retsize = 64);
+  retind = 0;
+
+  start_lineno = line_number;
+  ch = EOF;		/* just in case */
+  while (count)
+    {
+      prevch = ch;
+      ch = shell_getc (qc != '\'' && (tflags & (LEX_PASSNEXT)) == 0);
+
+      if (ch == EOF)
+	{
+	  free (ret);
+	  parser_error (start_lineno, _("unexpected EOF while looking for matching `%c'"), close);
+	  EOF_Reached = 1;	/* XXX */
+	  return (&matched_pair_error);
+	}
+
+      /* Possible reprompting. */
+      if (ch == '\n' && SHOULD_PROMPT ())
+	prompt_again ();
+
+      /* Don't bother counting parens or doing anything else if in a comment
+	 or part of a case statement */
+      if (tflags & LEX_INCOMMENT)
+	{
+	  /* Add this character. */
+	  RESIZE_MALLOCED_BUFFER (ret, retind, 1, retsize, 64);
+	  ret[retind++] = ch;
+
+	  if (ch == '\n')
+	    tflags &= ~LEX_INCOMMENT;
+
+	  continue;
+	}
+
+      /* Not exactly right yet, should handle shell metacharacters, too.  If
+	 any changes are made to this test, make analogous changes to subst.c:
+	 extract_delimited_string(). */
+      else if MBTEST((tflags & LEX_CKCOMMENT) && (tflags & LEX_INCOMMENT) == 0 && ch == '#' && (retind == 0 || ret[retind-1] == '\n' || shellblank (ret[retind - 1])))
+	tflags |= LEX_INCOMMENT;
+
+      if (tflags & LEX_PASSNEXT)		/* last char was backslash */
+	{
+	  tflags &= ~LEX_PASSNEXT;
+	  if (qc != '\'' && ch == '\n')	/* double-quoted \<newline> disappears. */
+	    {
+	      if (retind > 0)
+		retind--;	/* swallow previously-added backslash */
+	      continue;
+	    }
+
+	  RESIZE_MALLOCED_BUFFER (ret, retind, 2, retsize, 64);
+	  if MBTEST(ch == CTLESC)
+	    ret[retind++] = CTLESC;
+	  ret[retind++] = ch;
+	  continue;
+	}
+      /* If we're reparsing the input (e.g., from parse_string_to_word_list),
+	 we've already prepended CTLESC to single-quoted results of $'...'.
+	 We may want to do this for other CTLESC-quoted characters in
+	 reparse, too. */
+      else if MBTEST((parser_state & PST_REPARSE) && open == '\'' && (ch == CTLESC || ch == CTLNUL))
+	{
+	  RESIZE_MALLOCED_BUFFER (ret, retind, 1, retsize, 64);
+	  ret[retind++] = ch;
+	  continue;
+	}
+      else if MBTEST(ch == CTLESC || ch == CTLNUL)	/* special shell escapes */
+	{
+	  RESIZE_MALLOCED_BUFFER (ret, retind, 2, retsize, 64);
+	  ret[retind++] = CTLESC;
+	  ret[retind++] = ch;
+	  continue;
+	}
+      else if MBTEST(ch == close)		/* ending delimiter */
+	count--;
+      /* handle nested ${...} specially. */
+      else if MBTEST(open != close && (tflags & LEX_WASDOL) && open == '{' && ch == open) /* } */
+	count++;
+      else if MBTEST(((flags & P_FIRSTCLOSE) == 0) && ch == open)	/* nested begin */
+	count++;
+
+      /* Add this character. */
+      RESIZE_MALLOCED_BUFFER (ret, retind, 1, retsize, 64);
+      ret[retind++] = ch;
+
+      /* If we just read the ending character, don't bother continuing. */
+      if (count == 0)
+	break;
+
+      if (open == '\'')			/* '' inside grouping construct */
+	{
+	  if MBTEST((flags & P_ALLOWESC) && ch == '\\')
+	    tflags |= LEX_PASSNEXT;
+	  continue;
+	}
+
+      if MBTEST(ch == '\\')			/* backslashes */
+	tflags |= LEX_PASSNEXT;
+
+      /* Based on which dolstate is currently in (param, op, or word),
+	 decide what the op is.  We're really only concerned if it's % or
+	 #, so we can turn on a flag that says whether or not we should
+	 treat single quotes as special when inside a double-quoted
+	 ${...}. This logic must agree with subst.c:extract_dollar_brace_string
+	 since they share the same defines. */
+      /* FLAG POSIX INTERP 221 */
+      if (flags & P_DOLBRACE)
+        {
+          /* ${param%[%]word} */
+	  if MBTEST(dolbrace_state == DOLBRACE_PARAM && ch == '%' && retind > 1)
+	    dolbrace_state = DOLBRACE_QUOTE;
+          /* ${param#[#]word} */
+	  else if MBTEST(dolbrace_state == DOLBRACE_PARAM && ch == '#' && retind > 1)
+	    dolbrace_state = DOLBRACE_QUOTE;
+          /* ${param/[/]pat/rep} */
+	  else if MBTEST(dolbrace_state == DOLBRACE_PARAM && ch == '/' && retind > 1)
+	    dolbrace_state = DOLBRACE_QUOTE2;	/* XXX */
+          /* ${param^[^]pat} */
+	  else if MBTEST(dolbrace_state == DOLBRACE_PARAM && ch == '^' && retind > 1)
+	    dolbrace_state = DOLBRACE_QUOTE;
+          /* ${param,[,]pat} */
+	  else if MBTEST(dolbrace_state == DOLBRACE_PARAM && ch == ',' && retind > 1)
+	    dolbrace_state = DOLBRACE_QUOTE;
+	  else if MBTEST(dolbrace_state == DOLBRACE_PARAM && strchr ("#%^,~:-=?+/", ch) != 0)
+	    dolbrace_state = DOLBRACE_OP;
+	  else if MBTEST(dolbrace_state == DOLBRACE_OP && strchr ("#%^,~:-=?+/", ch) == 0)
+	    dolbrace_state = DOLBRACE_WORD;
+        }
+
+      /* The big hammer.  Single quotes aren't special in double quotes.  The
+         problem is that Posix used to say the single quotes are semi-special:
+         within a double-quoted ${...} construct "an even number of
+         unescaped double-quotes or single-quotes, if any, shall occur." */
+      /* This was changed in Austin Group Interp 221 */
+      if MBTEST(posixly_correct && shell_compatibility_level > 41 && dolbrace_state != DOLBRACE_QUOTE && dolbrace_state != DOLBRACE_QUOTE2 && (flags & P_DQUOTE) && (flags & P_DOLBRACE) && ch == '\'')
+	continue;
+
+      /* Could also check open == '`' if we want to parse grouping constructs
+	 inside old-style command substitution. */
+      if (open != close)		/* a grouping construct */
+	{
+	  if MBTEST(shellquote (ch))
+	    {
+	      /* '', ``, or "" inside $(...) or other grouping construct. */
+	      push_delimiter (dstack, ch);
+	      if MBTEST((tflags & LEX_WASDOL) && ch == '\'')	/* $'...' inside group */
+		nestret = parse_matched_pair (ch, ch, ch, &nestlen, P_ALLOWESC|rflags);
+	      else
+		nestret = parse_matched_pair (ch, ch, ch, &nestlen, rflags);
+	      pop_delimiter (dstack);
+	      CHECK_NESTRET_ERROR ();
+
+	      if MBTEST((tflags & LEX_WASDOL) && ch == '\'' && (extended_quote || (rflags & P_DQUOTE) == 0))
+		{
+		  /* Translate $'...' here. */
+		  ttrans = ansiexpand (nestret, 0, nestlen - 1, &ttranslen);
+		  free (nestret);
+
+		  /* If we're parsing a double-quoted brace expansion and we are
+		     not in a place where single quotes are treated specially,
+		     make sure we single-quote the results of the ansi
+		     expansion because quote removal should remove them later */
+		  /* FLAG POSIX INTERP 221 */
+		  if ((shell_compatibility_level > 42) && (rflags & P_DQUOTE) && (dolbrace_state == DOLBRACE_QUOTE2) && (flags & P_DOLBRACE))
+		    {
+		      nestret = sh_single_quote (ttrans);
+		      free (ttrans);
+		      nestlen = strlen (nestret);
+		    }
+		  else if ((rflags & P_DQUOTE) == 0)
+		    {
+		      nestret = sh_single_quote (ttrans);
+		      free (ttrans);
+		      nestlen = strlen (nestret);
+		    }
+		  else
+		    {
+		      nestret = ttrans;
+		      nestlen = ttranslen;
+		    }
+		  retind -= 2;		/* back up before the $' */
+		}
+	      else if MBTEST((tflags & LEX_WASDOL) && ch == '"' && (extended_quote || (rflags & P_DQUOTE) == 0))
+		{
+		  /* Locale expand $"..." here. */
+		  ttrans = localeexpand (nestret, 0, nestlen - 1, start_lineno, &ttranslen);
+		  free (nestret);
+
+		  nestret = sh_mkdoublequoted (ttrans, ttranslen, 0);
+		  free (ttrans);
+		  nestlen = ttranslen + 2;
+		  retind -= 2;		/* back up before the $" */
+		}
+
+	      APPEND_NESTRET ();
+	      FREE (nestret);
+	    }
+	  else if ((flags & (P_ARRAYSUB|P_DOLBRACE)) && (tflags & LEX_WASDOL) && (ch == '(' || ch == '{' || ch == '['))	/* ) } ] */
+	    goto parse_dollar_word;
+#if defined (PROCESS_SUBSTITUTION)
+	  /* XXX - technically this should only be recognized at the start of
+	     a word */
+	  else if ((flags & (P_ARRAYSUB|P_DOLBRACE)) && (tflags & LEX_GTLT) && (ch == '('))	/* ) */
+	    goto parse_dollar_word;
+#endif
+	}
+      /* Parse an old-style command substitution within double quotes as a
+	 single word. */
+      /* XXX - sh and ksh93 don't do this - XXX */
+      else if MBTEST(open == '"' && ch == '`')
+	{
+	  nestret = parse_matched_pair (0, '`', '`', &nestlen, rflags);
+
+	  CHECK_NESTRET_ERROR ();
+	  APPEND_NESTRET ();
+
+	  FREE (nestret);
+	}
+      else if MBTEST(open != '`' && (tflags & LEX_WASDOL) && (ch == '(' || ch == '{' || ch == '['))	/* ) } ] */
+	/* check for $(), $[], or ${} inside quoted string. */
+	{
+parse_dollar_word:
+	  if (open == ch)	/* undo previous increment */
+	    count--;
+	  if (ch == '(')		/* ) */
+	    nestret = parse_comsub (0, '(', ')', &nestlen, (rflags|P_COMMAND) & ~P_DQUOTE);
+	  else if (ch == '{')		/* } */
+	    nestret = parse_matched_pair (0, '{', '}', &nestlen, P_FIRSTCLOSE|P_DOLBRACE|rflags);
+	  else if (ch == '[')		/* ] */
+	    nestret = parse_matched_pair (0, '[', ']', &nestlen, rflags);
+
+	  CHECK_NESTRET_ERROR ();
+	  APPEND_NESTRET ();
+
+	  FREE (nestret);
+	}
+#if defined (PROCESS_SUBSTITUTION)
+      if MBTEST((ch == '<' || ch == '>') && (tflags & LEX_GTLT) == 0)
+	tflags |= LEX_GTLT;
+      else
+	tflags &= ~LEX_GTLT;
+#endif
+      if MBTEST(ch == '$' && (tflags & LEX_WASDOL) == 0)
+	tflags |= LEX_WASDOL;
+      else
+	tflags &= ~LEX_WASDOL;
+    }
+
+  ret[retind] = '\0';
+  if (lenp)
+    *lenp = retind;
+/*itrace("parse_matched_pair[%d]: returning %s", line_number, ret);*/
+  return ret;
+}
+
+#if defined (DEBUG)
+static void
+dump_tflags (flags)
+     int flags;
+{
+  int f;
+
+  f = flags;
+  fprintf (stderr, "%d -> ", f);
+  if (f & LEX_WASDOL)
+    {
+      f &= ~LEX_WASDOL;
+      fprintf (stderr, "LEX_WASDOL%s", f ? "|" : "");
+    }
+  if (f & LEX_CKCOMMENT)
+    {
+      f &= ~LEX_CKCOMMENT;
+      fprintf (stderr, "LEX_CKCOMMENT%s", f ? "|" : "");
+    }
+  if (f & LEX_INCOMMENT)
+    {
+      f &= ~LEX_INCOMMENT;
+      fprintf (stderr, "LEX_INCOMMENT%s", f ? "|" : "");
+    }
+  if (f & LEX_PASSNEXT)
+    {
+      f &= ~LEX_PASSNEXT;
+      fprintf (stderr, "LEX_PASSNEXT%s", f ? "|" : "");
+    }
+  if (f & LEX_RESWDOK)
+    {
+      f &= ~LEX_RESWDOK;
+      fprintf (stderr, "LEX_RESWDOK%s", f ? "|" : "");
+    }
+  if (f & LEX_CKCASE)
+    {
+      f &= ~LEX_CKCASE;
+      fprintf (stderr, "LEX_CKCASE%s", f ? "|" : "");
+    }
+  if (f & LEX_INCASE)
+    {
+      f &= ~LEX_INCASE;
+      fprintf (stderr, "LEX_INCASE%s", f ? "|" : "");
+    }
+  if (f & LEX_INHEREDOC)
+    {
+      f &= ~LEX_INHEREDOC;
+      fprintf (stderr, "LEX_INHEREDOC%s", f ? "|" : "");
+    }
+  if (f & LEX_HEREDELIM)
+    {
+      f &= ~LEX_HEREDELIM;
+      fprintf (stderr, "LEX_HEREDELIM%s", f ? "|" : "");
+    }
+  if (f & LEX_STRIPDOC)
+    {
+      f &= ~LEX_STRIPDOC;
+      fprintf (stderr, "LEX_WASDOL%s", f ? "|" : "");
+    }
+  if (f & LEX_QUOTEDDOC)
+    {
+      f &= ~LEX_QUOTEDDOC;
+      fprintf (stderr, "LEX_QUOTEDDOC%s", f ? "|" : "");
+    }
+  if (f & LEX_INWORD)
+    {
+      f &= ~LEX_INWORD;
+      fprintf (stderr, "LEX_INWORD%s", f ? "|" : "");
+    }
+
+  fprintf (stderr, "\n");
+  fflush (stderr);
+}
+#endif
+
+/* Parse a $(...) command substitution.  This is messier than I'd like, and
+   reproduces a lot more of the token-reading code than I'd like. */
+static char *
+parse_comsub (qc, open, close, lenp, flags)
+     int qc;	/* `"' if this construct is within double quotes */
+     int open, close;
+     int *lenp, flags;
+{
+  int count, ch, peekc, tflags, lex_rwlen, lex_wlen, lex_firstind;
+  int nestlen, ttranslen, start_lineno, orig_histexp;
+  char *ret, *nestret, *ttrans, *heredelim;
+  int retind, retsize, rflags, hdlen;
+
+  /* Posix interp 217 says arithmetic expressions have precedence, so
+     assume $(( introduces arithmetic expansion and parse accordingly. */
+  peekc = shell_getc (0);
+  shell_ungetc (peekc);
+  if (peekc == '(')
+    return (parse_matched_pair (qc, open, close, lenp, 0));
+
+/*itrace("parse_comsub: qc = `%c' open = %c close = %c", qc, open, close);*/
+  count = 1;
+  tflags = LEX_RESWDOK;
+#if defined (BANG_HISTORY)
+  orig_histexp = history_expansion_inhibited;
+#endif
+
+  if ((flags & P_COMMAND) && qc != '\'' && qc != '"' && (flags & P_DQUOTE) == 0)
+    tflags |= LEX_CKCASE;
+  if ((tflags & LEX_CKCASE) && (interactive == 0 || interactive_comments))
+    tflags |= LEX_CKCOMMENT;
+
+  /* RFLAGS is the set of flags we want to pass to recursive calls. */
+  rflags = (flags & P_DQUOTE);
+
+  ret = (char *)xmalloc (retsize = 64);
+  retind = 0;
+
+  start_lineno = line_number;
+  lex_rwlen = lex_wlen = 0;
+
+  heredelim = 0;
+  lex_firstind = -1;
+
+  while (count)
+    {
+comsub_readchar:
+      ch = shell_getc (qc != '\'' && (tflags & (LEX_INCOMMENT|LEX_PASSNEXT|LEX_QUOTEDDOC)) == 0);
+
+      if (ch == EOF)
+	{
+eof_error:
+#if defined (BANG_HISTORY)
+	  history_expansion_inhibited = orig_histexp;
+#endif
+	  free (ret);
+	  FREE (heredelim);
+	  parser_error (start_lineno, _("unexpected EOF while looking for matching `%c'"), close);
+	  EOF_Reached = 1;	/* XXX */
+	  return (&matched_pair_error);
+	}
+
+      /* If we hit the end of a line and are reading the contents of a here
+	 document, and it's not the same line that the document starts on,
+	 check for this line being the here doc delimiter.  Otherwise, if
+	 we're in a here document, mark the next character as the beginning
+	 of a line. */
+      if (ch == '\n')
+	{
+	  if ((tflags & LEX_HEREDELIM) && heredelim)
+	    {
+	      tflags &= ~LEX_HEREDELIM;
+	      tflags |= LEX_INHEREDOC;
+#if defined (BANG_HISTORY)
+	      history_expansion_inhibited = 1;
+#endif
+	      lex_firstind = retind + 1;
+	    }
+	  else if (tflags & LEX_INHEREDOC)
+	    {
+	      int tind;
+	      tind = lex_firstind;
+	      while ((tflags & LEX_STRIPDOC) && ret[tind] == '\t')
+		tind++;
+	      if (retind-tind == hdlen && STREQN (ret + tind, heredelim, hdlen))
+		{
+		  tflags &= ~(LEX_STRIPDOC|LEX_INHEREDOC|LEX_QUOTEDDOC);
+/*itrace("parse_comsub:%d: found here doc end `%s'", line_number, ret + tind);*/
+		  free (heredelim);
+		  heredelim = 0;
+		  lex_firstind = -1;
+#if defined (BANG_HISTORY)
+		  history_expansion_inhibited = orig_histexp;
+#endif
+		}
+	      else
+		lex_firstind = retind + 1;
+	    }
+	}
+
+      /* Possible reprompting. */
+      if (ch == '\n' && SHOULD_PROMPT ())
+	prompt_again ();
+
+      /* XXX -- we currently allow here doc to be delimited by ending right
+	 paren in default mode and posix mode. To change posix mode, change
+	 the #if 1 to #if 0 below */
+      if ((tflags & LEX_INHEREDOC) && ch == close && count == 1)
+	{
+	  int tind;
+/*itrace("parse_comsub:%d: in here doc, ch == close, retind - firstind = %d hdlen = %d retind = %d", line_number, retind-lex_firstind, hdlen, retind);*/
+	  tind = lex_firstind;
+	  while ((tflags & LEX_STRIPDOC) && ret[tind] == '\t')
+	    tind++;
+#if 1
+  	  if (retind-tind == hdlen && STREQN (ret + tind, heredelim, hdlen))
+#else
+	  /* Posix-mode shells require the newline after the here-document
+	     delimiter. */
+	  if (retind-tind == hdlen && STREQN (ret + tind, heredelim, hdlen) &&
+	      posixly_correct == 0)
+#endif
+	    {
+	      tflags &= ~(LEX_STRIPDOC|LEX_INHEREDOC|LEX_QUOTEDDOC);
+/*itrace("parse_comsub:%d: found here doc end `%*s'", line_number, hdlen, ret + tind);*/
+	      free (heredelim);
+	      heredelim = 0;
+	      lex_firstind = -1;
+#if defined (BANG_HISTORY)
+	      history_expansion_inhibited = orig_histexp;
+#endif
+	    }
+	}
+
+      /* Don't bother counting parens or doing anything else if in a comment or
+	 here document (not exactly right for here-docs -- if we want to allow
+	 recursive calls to parse_comsub to have their own here documents,
+	 change the LEX_INHEREDOC to LEX_QUOTEDDOC here and uncomment the next
+	 clause below.  Note that to make this work completely, we need to make
+	 additional changes to allow xparse_dolparen to work right when the
+	 command substitution is parsed, because read_secondary_line doesn't know
+	 to recursively parse through command substitutions embedded in here-
+	 documents */
+      if (tflags & (LEX_INCOMMENT|LEX_INHEREDOC))
+	{
+	  /* Add this character. */
+	  RESIZE_MALLOCED_BUFFER (ret, retind, 1, retsize, 64);
+	  ret[retind++] = ch;
+
+	  if ((tflags & LEX_INCOMMENT) && ch == '\n')
+	    {
+/*itrace("parse_comsub:%d: lex_incomment -> 0 ch = `%c'", line_number, ch);*/
+	      tflags &= ~LEX_INCOMMENT;
+	    }
+
+	  continue;
+	}
+#if 0
+      /* If we're going to recursively parse a command substitution inside a
+	 here-document, make sure we call parse_comsub recursively below.  See
+	 above for additional caveats. */
+      if ((tflags & LEX_INHEREDOC) && ((tflags & LEX_WASDOL) == 0 || ch != '(')) /*)*/
+	{
+	  /* Add this character. */
+	  RESIZE_MALLOCED_BUFFER (ret, retind, 1, retsize, 64);
+	  ret[retind++] = ch;
+	  if MBTEST(ch == '$')
+	    tflags |= LEX_WASDOL;
+	  else
+	    tflags &= ~LEX_WASDOL;
+	}
+#endif
+
+      if (tflags & LEX_PASSNEXT)		/* last char was backslash */
+	{
+/*itrace("parse_comsub:%d: lex_passnext -> 0 ch = `%c' (%d)", line_number, ch, __LINE__);*/
+	  tflags &= ~LEX_PASSNEXT;
+	  if (qc != '\'' && ch == '\n')	/* double-quoted \<newline> disappears. */
+	    {
+	      if (retind > 0)
+		retind--;	/* swallow previously-added backslash */
+	      continue;
+	    }
+
+	  RESIZE_MALLOCED_BUFFER (ret, retind, 2, retsize, 64);
+	  if MBTEST(ch == CTLESC)
+	    ret[retind++] = CTLESC;
+	  ret[retind++] = ch;
+	  continue;
+	}
+
+      /* If this is a shell break character, we are not in a word.  If not,
+	 we either start or continue a word. */
+      if MBTEST(shellbreak (ch))
+	{
+	  tflags &= ~LEX_INWORD;
+/*itrace("parse_comsub:%d: lex_inword -> 0 ch = `%c' (%d)", line_number, ch, __LINE__);*/
+	}
+      else
+	{
+	  if (tflags & LEX_INWORD)
+	    {
+	      lex_wlen++;
+/*itrace("parse_comsub:%d: lex_inword == 1 ch = `%c' lex_wlen = %d (%d)", line_number, ch, lex_wlen, __LINE__);*/
+	    }	      
+	  else
+	    {
+/*itrace("parse_comsub:%d: lex_inword -> 1 ch = `%c' (%d)", line_number, ch, __LINE__);*/
+	      tflags |= LEX_INWORD;
+	      lex_wlen = 0;
+	      if (tflags & LEX_RESWDOK)
+		lex_rwlen = 0;
+	    }
+	}
+
+      /* Skip whitespace */
+      if MBTEST(shellblank (ch) && (tflags & LEX_HEREDELIM) == 0 && lex_rwlen == 0)
+        {
+	  /* Add this character. */
+	  RESIZE_MALLOCED_BUFFER (ret, retind, 1, retsize, 64);
+	  ret[retind++] = ch;
+	  continue;
+        }
+
+      /* Either we are looking for the start of the here-doc delimiter
+	 (lex_firstind == -1) or we are reading one (lex_firstind >= 0).
+	 If this character is a shell break character and we are reading
+	 the delimiter, save it and note that we are now reading a here
+	 document.  If we've found the start of the delimiter, note it by
+	 setting lex_firstind.  Backslashes can quote shell metacharacters
+	 in here-doc delimiters. */
+      if (tflags & LEX_HEREDELIM)
+	{
+	  if (lex_firstind == -1 && shellbreak (ch) == 0)
+	    lex_firstind = retind;
+#if 0
+	  else if (heredelim && (tflags & LEX_PASSNEXT) == 0 && ch == '\n')
+	    {
+	      tflags |= LEX_INHEREDOC;
+	      tflags &= ~LEX_HEREDELIM;
+	      lex_firstind = retind + 1;
+#if defined (BANG_HISTORY)
+	      history_expansion_inhibited = 1;
+#endif
+	    }
+#endif
+	  else if (lex_firstind >= 0 && (tflags & LEX_PASSNEXT) == 0 && shellbreak (ch))
+	    {
+	      if (heredelim == 0)
+		{
+		  nestret = substring (ret, lex_firstind, retind);
+		  heredelim = string_quote_removal (nestret, 0);
+		  hdlen = STRLEN(heredelim);
+/*itrace("parse_comsub:%d: found here doc delimiter `%s' (%d)", line_number, heredelim, hdlen);*/
+		  if (STREQ (heredelim, nestret) == 0)
+		    tflags |= LEX_QUOTEDDOC;
+		  free (nestret);
+		}
+	      if (ch == '\n')
+		{
+		  tflags |= LEX_INHEREDOC;
+		  tflags &= ~LEX_HEREDELIM;
+		  lex_firstind = retind + 1;
+#if defined (BANG_HISTORY)
+		  history_expansion_inhibited = 1;
+#endif
+		}
+	      else
+		lex_firstind = -1;
+	    }
+	}
+
+      /* Meta-characters that can introduce a reserved word.  Not perfect yet. */
+      if MBTEST((tflags & LEX_RESWDOK) == 0 && (tflags & LEX_CKCASE) && (tflags & LEX_INCOMMENT) == 0 && (shellmeta(ch) || ch == '\n'))
+	{
+	  /* Add this character. */
+	  RESIZE_MALLOCED_BUFFER (ret, retind, 1, retsize, 64);
+	  ret[retind++] = ch;
+	  peekc = shell_getc (1);
+	  if (ch == peekc && (ch == '&' || ch == '|' || ch == ';'))	/* two-character tokens */
+	    {
+	      RESIZE_MALLOCED_BUFFER (ret, retind, 1, retsize, 64);
+	      ret[retind++] = peekc;
+/*itrace("parse_comsub:%d: set lex_reswordok = 1, ch = `%c'", line_number, ch);*/
+	      tflags |= LEX_RESWDOK;
+	      lex_rwlen = 0;
+	      continue;
+	    }
+	  else if (ch == '\n' || COMSUB_META(ch))
+	    {
+	      shell_ungetc (peekc);
+/*itrace("parse_comsub:%d: set lex_reswordok = 1, ch = `%c'", line_number, ch);*/
+	      tflags |= LEX_RESWDOK;
+	      lex_rwlen = 0;
+	      continue;
+	    }
+	  else if (ch == EOF)
+	    goto eof_error;
+	  else
+	    {
+	      /* `unget' the character we just added and fall through */
+	      retind--;
+	      shell_ungetc (peekc);
+	    }
+	}
+
+      /* If we can read a reserved word, try to read one. */
+      if (tflags & LEX_RESWDOK)
+	{
+	  if MBTEST(islower ((unsigned char)ch))
+	    {
+	      /* Add this character. */
+	      RESIZE_MALLOCED_BUFFER (ret, retind, 1, retsize, 64);
+	      ret[retind++] = ch;
+	      lex_rwlen++;
+	      continue;
+	    }
+	  else if MBTEST(lex_rwlen == 4 && shellbreak (ch))
+	    {
+	      if (STREQN (ret + retind - 4, "case", 4))
+		{
+		  tflags |= LEX_INCASE;
+		  tflags &= ~LEX_RESWDOK;
+/*itrace("parse_comsub:%d: found `case', lex_incase -> 1 lex_reswdok -> 0", line_number);*/
+		}
+	      else if (STREQN (ret + retind - 4, "esac", 4))
+		{
+		  tflags &= ~LEX_INCASE;
+/*itrace("parse_comsub:%d: found `esac', lex_incase -> 0 lex_reswdok -> 1", line_number);*/
+		  tflags |= LEX_RESWDOK;
+		  lex_rwlen = 0;
+		}
+	      else if (STREQN (ret + retind - 4, "done", 4) ||
+		       STREQN (ret + retind - 4, "then", 4) ||
+		       STREQN (ret + retind - 4, "else", 4) ||
+		       STREQN (ret + retind - 4, "elif", 4) ||
+		       STREQN (ret + retind - 4, "time", 4))
+		{
+		  /* these are four-character reserved words that can be
+		     followed by a reserved word; anything else turns off
+		     the reserved-word-ok flag */
+/*itrace("parse_comsub:%d: found `%.4s', lex_reswdok -> 1", line_number, ret+retind-4);*/
+		  tflags |= LEX_RESWDOK;
+		  lex_rwlen = 0;
+		}
+	       else if (shellmeta (ch) == 0)
+		{
+		  tflags &= ~LEX_RESWDOK;
+/*itrace("parse_comsub:%d: found `%.4s', lex_reswdok -> 0", line_number, ret+retind-4);*/
+		}
+	      else	/* can't be in a reserved word any more */
+	        lex_rwlen = 0;
+	    }
+	  else if MBTEST((tflags & LEX_CKCOMMENT) && ch == '#' && (lex_rwlen == 0 || ((tflags & LEX_INWORD) && lex_wlen == 0)))
+	    ;	/* don't modify LEX_RESWDOK if we're starting a comment */
+	  /* Allow `do' followed by space, tab, or newline to preserve the
+	     RESWDOK flag, but reset the reserved word length counter so we
+	     can read another one. */
+	  else if MBTEST(((tflags & LEX_INCASE) == 0) &&
+			  (isblank((unsigned char)ch) || ch == '\n') &&
+			  lex_rwlen == 2 &&
+			  STREQN (ret + retind - 2, "do", 2))
+	    {
+/*itrace("parse_comsub:%d: lex_incase == 0 found `%c', found \"do\"", line_number, ch);*/
+	      lex_rwlen = 0;
+	    }
+	  else if MBTEST((tflags & LEX_INCASE) && ch != '\n')
+	    /* If we can read a reserved word and we're in case, we're at the
+	       point where we can read a new pattern list or an esac.  We
+	       handle the esac case above.  If we read a newline, we want to
+	       leave LEX_RESWDOK alone.  If we read anything else, we want to
+	       turn off LEX_RESWDOK, since we're going to read a pattern list. */
+	    {
+	      tflags &= ~LEX_RESWDOK;
+/*itrace("parse_comsub:%d: lex_incase == 1 found `%c', lex_reswordok -> 0", line_number, ch);*/
+	    }
+	  else if MBTEST(shellbreak (ch) == 0)
+	    {
+	      tflags &= ~LEX_RESWDOK;
+/*itrace("parse_comsub:%d: found `%c', lex_reswordok -> 0", line_number, ch);*/
+	    }
+#if 0
+	  /* If we find a space or tab but have read something and it's not
+	     `do', turn off the reserved-word-ok flag */
+	  else if MBTEST(isblank ((unsigned char)ch) && lex_rwlen > 0)
+	    {
+	      tflags &= ~LEX_RESWDOK;
+/*itrace("parse_comsub:%d: found `%c', lex_reswordok -> 0", line_number, ch);*/
+	    }
+#endif
+	}
+
+      /* Might be the start of a here-doc delimiter */
+      if MBTEST((tflags & LEX_INCOMMENT) == 0 && (tflags & LEX_CKCASE) && ch == '<')
+	{
+	  /* Add this character. */
+	  RESIZE_MALLOCED_BUFFER (ret, retind, 1, retsize, 64);
+	  ret[retind++] = ch;
+	  peekc = shell_getc (1);
+	  if (peekc == EOF)
+	    goto eof_error;
+	  if (peekc == ch)
+	    {
+	      RESIZE_MALLOCED_BUFFER (ret, retind, 1, retsize, 64);
+	      ret[retind++] = peekc;
+	      peekc = shell_getc (1);
+	      if (peekc == EOF)
+		goto eof_error;
+	      if (peekc == '-')
+		{
+		  RESIZE_MALLOCED_BUFFER (ret, retind, 1, retsize, 64);
+		  ret[retind++] = peekc;
+		  tflags |= LEX_STRIPDOC;
+		}
+	      else
+		shell_ungetc (peekc);
+	      if (peekc != '<')
+		{
+		  tflags |= LEX_HEREDELIM;
+		  lex_firstind = -1;
+		}
+	      continue;
+	    }
+	  else
+	    {
+	      shell_ungetc (peekc);	/* not a here-doc, start over */
+	      continue;
+	    }
+	}
+      else if MBTEST((tflags & LEX_CKCOMMENT) && (tflags & LEX_INCOMMENT) == 0 && ch == '#' && (((tflags & LEX_RESWDOK) && lex_rwlen == 0) || ((tflags & LEX_INWORD) && lex_wlen == 0)))
+	{
+/*itrace("parse_comsub:%d: lex_incomment -> 1 (%d)", line_number, __LINE__);*/
+	  tflags |= LEX_INCOMMENT;
+	}
+
+      if MBTEST(ch == CTLESC || ch == CTLNUL)	/* special shell escapes */
+	{
+	  RESIZE_MALLOCED_BUFFER (ret, retind, 2, retsize, 64);
+	  ret[retind++] = CTLESC;
+	  ret[retind++] = ch;
+	  continue;
+	}
+#if 0
+      else if MBTEST((tflags & LEX_INCASE) && ch == close && close == ')')
+        tflags &= ~LEX_INCASE;		/* XXX */
+#endif
+      else if MBTEST(ch == close && (tflags & LEX_INCASE) == 0)		/* ending delimiter */
+	{
+	  count--;
+/*itrace("parse_comsub:%d: found close: count = %d", line_number, count);*/
+	}
+      else if MBTEST(((flags & P_FIRSTCLOSE) == 0) && (tflags & LEX_INCASE) == 0 && ch == open)	/* nested begin */
+	{
+	  count++;
+/*itrace("parse_comsub:%d: found open: count = %d", line_number, count);*/
+	}
+
+      /* Add this character. */
+      RESIZE_MALLOCED_BUFFER (ret, retind, 1, retsize, 64);
+      ret[retind++] = ch;
+
+      /* If we just read the ending character, don't bother continuing. */
+      if (count == 0)
+	break;
+
+      if MBTEST(ch == '\\')			/* backslashes */
+	tflags |= LEX_PASSNEXT;
+
+      if MBTEST(shellquote (ch))
+        {
+          /* '', ``, or "" inside $(...). */
+          push_delimiter (dstack, ch);
+          if MBTEST((tflags & LEX_WASDOL) && ch == '\'')	/* $'...' inside group */
+	    nestret = parse_matched_pair (ch, ch, ch, &nestlen, P_ALLOWESC|rflags);
+	  else
+	    nestret = parse_matched_pair (ch, ch, ch, &nestlen, rflags);
+	  pop_delimiter (dstack);
+	  CHECK_NESTRET_ERROR ();
+
+	  if MBTEST((tflags & LEX_WASDOL) && ch == '\'' && (extended_quote || (rflags & P_DQUOTE) == 0))
+	    {
+	      /* Translate $'...' here. */
+	      ttrans = ansiexpand (nestret, 0, nestlen - 1, &ttranslen);
+	      free (nestret);
+
+	      if ((rflags & P_DQUOTE) == 0)
+		{
+		  nestret = sh_single_quote (ttrans);
+		  free (ttrans);
+		  nestlen = strlen (nestret);
+		}
+	      else
+		{
+		  nestret = ttrans;
+		  nestlen = ttranslen;
+		}
+	      retind -= 2;		/* back up before the $' */
+	    }
+	  else if MBTEST((tflags & LEX_WASDOL) && ch == '"' && (extended_quote || (rflags & P_DQUOTE) == 0))
+	    {
+	      /* Locale expand $"..." here. */
+	      ttrans = localeexpand (nestret, 0, nestlen - 1, start_lineno, &ttranslen);
+	      free (nestret);
+
+	      nestret = sh_mkdoublequoted (ttrans, ttranslen, 0);
+	      free (ttrans);
+	      nestlen = ttranslen + 2;
+	      retind -= 2;		/* back up before the $" */
+	    }
+
+	  APPEND_NESTRET ();
+	  FREE (nestret);
+	}
+      else if MBTEST((tflags & LEX_WASDOL) && (ch == '(' || ch == '{' || ch == '['))	/* ) } ] */
+	/* check for $(), $[], or ${} inside command substitution. */
+	{
+	  if ((tflags & LEX_INCASE) == 0 && open == ch)	/* undo previous increment */
+	    count--;
+	  if (ch == '(')		/* ) */
+	    nestret = parse_comsub (0, '(', ')', &nestlen, (rflags|P_COMMAND) & ~P_DQUOTE);
+	  else if (ch == '{')		/* } */
+	    nestret = parse_matched_pair (0, '{', '}', &nestlen, P_FIRSTCLOSE|P_DOLBRACE|rflags);
+	  else if (ch == '[')		/* ] */
+	    nestret = parse_matched_pair (0, '[', ']', &nestlen, rflags);
+
+	  CHECK_NESTRET_ERROR ();
+	  APPEND_NESTRET ();
+
+	  FREE (nestret);
+	}
+      if MBTEST(ch == '$' && (tflags & LEX_WASDOL) == 0)
+	tflags |= LEX_WASDOL;
+      else
+	tflags &= ~LEX_WASDOL;
+    }
+
+#if defined (BANG_HISTORY)
+  history_expansion_inhibited = orig_histexp;
+#endif
+  FREE (heredelim);
+  ret[retind] = '\0';
+  if (lenp)
+    *lenp = retind;
+/*itrace("parse_comsub:%d: returning `%s'", line_number, ret);*/
+  return ret;
+}
+
+/* Recursively call the parser to parse a $(...) command substitution. */
+char *
+xparse_dolparen (base, string, indp, flags)
+     char *base;
+     char *string;
+     int *indp;
+     int flags;
+{
+  sh_parser_state_t ps;
+  sh_input_line_state_t ls;
+  int orig_ind, nc, sflags, orig_eof_token, start_lineno;
+  char *ret, *ep, *ostring;
+#if defined (ALIAS) || defined (DPAREN_ARITHMETIC)
+  STRING_SAVER *saved_pushed_strings;
+#endif
+
+/*debug_parser(1);*/
+  orig_ind = *indp;
+  ostring = string;
+  start_lineno = line_number;
+
+  if (*string == 0)
+    {
+      if (flags & SX_NOALLOC) 
+	return (char *)NULL;
+
+      ret = xmalloc (1);
+      ret[0] = '\0';
+      return ret;
+    }
+
+/*itrace("xparse_dolparen: size = %d shell_input_line = `%s' string=`%s'", shell_input_line_size, shell_input_line, string);*/
+  sflags = SEVAL_NONINT|SEVAL_NOHIST|SEVAL_NOFREE;
+  if (flags & SX_NOLONGJMP)
+    sflags |= SEVAL_NOLONGJMP;
+  save_parser_state (&ps);
+  save_input_line_state (&ls);
+  orig_eof_token = shell_eof_token;
+#if defined (ALIAS) || defined (DPAREN_ARITHMETIC)
+  saved_pushed_strings = pushed_string_list;	/* separate parsing context */
+  pushed_string_list = (STRING_SAVER *)NULL;
+#endif
+
+  /*(*/
+  parser_state |= PST_CMDSUBST|PST_EOFTOKEN;	/* allow instant ')' */ /*(*/
+  shell_eof_token = ')';
+
+  /* Should we save and restore the bison/yacc lookahead token (yychar) here?
+     Or only if it's not YYEMPTY? */
+
+  nc = parse_string (string, "command substitution", sflags, &ep);
+
+  if (current_token == shell_eof_token)
+    yyclearin;		/* might want to clear lookahead token unconditionally */
+
+  reset_parser ();
+  /* reset_parser() clears shell_input_line and associated variables, including
+     parser_state, so we want to reset things, then restore what we need. */
+  restore_input_line_state (&ls);
+
+  shell_eof_token = orig_eof_token;
+  restore_parser_state (&ps);
+
+#if defined (ALIAS) || defined (DPAREN_ARITHMETIC)
+  pushed_string_list = saved_pushed_strings;
+#endif
+
+  token_to_read = 0;
+
+  /* If parse_string returns < 0, we need to jump to top level with the
+     negative of the return value. We abandon the rest of this input line
+     first */
+  if (nc < 0)
+    {
+      clear_shell_input_line ();	/* XXX */
+      if (bash_input.type != st_string)	/* paranoia */
+	parser_state &= ~(PST_CMDSUBST|PST_EOFTOKEN);
+      jump_to_top_level (-nc);	/* XXX */
+    }
+
+  /* Need to find how many characters parse_and_execute consumed, update
+     *indp, if flags != 0, copy the portion of the string parsed into RET
+     and return it.  If flags & 1 (SX_NOALLOC) we can return NULL. */
+
+  /*(*/
+  if (ep[-1] != ')')
+    {
+#if DEBUG
+      if (ep[-1] != '\n')
+	itrace("xparse_dolparen:%d: ep[-1] != RPAREN (%d), ep = `%s'", line_number, ep[-1], ep);
+#endif
+
+      while (ep > ostring && ep[-1] == '\n') ep--;
+    }
+
+  nc = ep - ostring;
+  *indp = ep - base - 1;
+
+  /*((*/
+#if DEBUG
+  if (base[*indp] != ')')
+    itrace("xparse_dolparen:%d: base[%d] != RPAREN (%d), base = `%s'", line_number, *indp, base[*indp], base);
+  if (*indp < orig_ind)
+    itrace("xparse_dolparen:%d: *indp (%d) < orig_ind (%d), orig_string = `%s'", line_number, *indp, orig_ind, ostring);
+#endif
+
+  if (base[*indp] != ')')
+    {
+      /*(*/
+      parser_error (start_lineno, _("unexpected EOF while looking for matching `%c'"), ')');
+      jump_to_top_level (DISCARD);
+    }
+
+  if (flags & SX_NOALLOC) 
+    return (char *)NULL;
+
+  if (nc == 0)
+    {
+      ret = xmalloc (1);
+      ret[0] = '\0';
+    }
+  else
+    ret = substring (ostring, 0, nc - 1);
+
+  return ret;
+}
+
+#if defined (DPAREN_ARITHMETIC) || defined (ARITH_FOR_COMMAND)
+/* Parse a double-paren construct.  It can be either an arithmetic
+   command, an arithmetic `for' command, or a nested subshell.  Returns
+   the parsed token, -1 on error, or -2 if we didn't do anything and
+   should just go on. */
+static int
+parse_dparen (c)
+     int c;
+{
+  int cmdtyp, sline;
+  char *wval;
+  WORD_DESC *wd;
+
+#if defined (ARITH_FOR_COMMAND)
+  if (last_read_token == FOR)
+    {
+      arith_for_lineno = line_number;
+      cmdtyp = parse_arith_cmd (&wval, 0);
+      if (cmdtyp == 1)
+	{
+	  wd = alloc_word_desc ();
+	  wd->word = wval;
+	  yylval.word_list = make_word_list (wd, (WORD_LIST *)NULL);
+	  return (ARITH_FOR_EXPRS);
+	}
+      else
+	return -1;		/* ERROR */
+    }
+#endif
+
+#if defined (DPAREN_ARITHMETIC)
+  if (reserved_word_acceptable (last_read_token))
+    {
+      sline = line_number;
+
+      cmdtyp = parse_arith_cmd (&wval, 0);
+      if (cmdtyp == 1)	/* arithmetic command */
+	{
+	  wd = alloc_word_desc ();
+	  wd->word = wval;
+	  wd->flags = W_QUOTED|W_NOSPLIT|W_NOGLOB|W_DQUOTE;
+	  yylval.word_list = make_word_list (wd, (WORD_LIST *)NULL);
+	  return (ARITH_CMD);
+	}
+      else if (cmdtyp == 0)	/* nested subshell */
+	{
+	  push_string (wval, 0, (alias_t *)NULL);
+	  pushed_string_list->flags = PSH_DPAREN;
+	  if ((parser_state & PST_CASEPAT) == 0)
+	    parser_state |= PST_SUBSHELL;
+	  return (c);
+	}
+      else			/* ERROR */
+	return -1;
+    }
+#endif
+
+  return -2;			/* XXX */
+}
+
+/* We've seen a `(('.  Look for the matching `))'.  If we get it, return 1.
+   If not, assume it's a nested subshell for backwards compatibility and
+   return 0.  In any case, put the characters we've consumed into a locally-
+   allocated buffer and make *ep point to that buffer.  Return -1 on an
+   error, for example EOF. */
+static int
+parse_arith_cmd (ep, adddq)
+     char **ep;
+     int adddq;
+{
+  int exp_lineno, rval, c;
+  char *ttok, *tokstr;
+  int ttoklen;
+
+  exp_lineno = line_number;
+  ttok = parse_matched_pair (0, '(', ')', &ttoklen, 0);
+  rval = 1;
+  if (ttok == &matched_pair_error)
+    return -1;
+  /* Check that the next character is the closing right paren.  If
+     not, this is a syntax error. ( */
+  c = shell_getc (0);
+  if MBTEST(c != ')')
+    rval = 0;
+
+  tokstr = (char *)xmalloc (ttoklen + 4);
+
+  /* if ADDDQ != 0 then (( ... )) -> "..." */
+  if (rval == 1 && adddq)	/* arith cmd, add double quotes */
+    {
+      tokstr[0] = '"';
+      strncpy (tokstr + 1, ttok, ttoklen - 1);
+      tokstr[ttoklen] = '"';
+      tokstr[ttoklen+1] = '\0';
+    }
+  else if (rval == 1)		/* arith cmd, don't add double quotes */
+    {
+      strncpy (tokstr, ttok, ttoklen - 1);
+      tokstr[ttoklen-1] = '\0';
+    }
+  else				/* nested subshell */
+    {
+      tokstr[0] = '(';
+      strncpy (tokstr + 1, ttok, ttoklen - 1);
+      tokstr[ttoklen] = ')';
+      tokstr[ttoklen+1] = c;
+      tokstr[ttoklen+2] = '\0';
+    }
+
+  *ep = tokstr;
+  FREE (ttok);
+  return rval;
+}
+#endif /* DPAREN_ARITHMETIC || ARITH_FOR_COMMAND */
+
+#if defined (COND_COMMAND)
+static void
+cond_error ()
+{
+  char *etext;
+
+  if (EOF_Reached && cond_token != COND_ERROR)		/* [[ */
+    parser_error (cond_lineno, _("unexpected EOF while looking for `]]'"));
+  else if (cond_token != COND_ERROR)
+    {
+      if (etext = error_token_from_token (cond_token))
+	{
+	  parser_error (cond_lineno, _("syntax error in conditional expression: unexpected token `%s'"), etext);
+	  free (etext);
+	}
+      else
+	parser_error (cond_lineno, _("syntax error in conditional expression"));
+    }
+}
+
+static COND_COM *
+cond_expr ()
+{
+  return (cond_or ());  
+}
+
+static COND_COM *
+cond_or ()
+{
+  COND_COM *l, *r;
+
+  l = cond_and ();
+  if (cond_token == OR_OR)
+    {
+      r = cond_or ();
+      l = make_cond_node (COND_OR, (WORD_DESC *)NULL, l, r);
+    }
+  return l;
+}
+
+static COND_COM *
+cond_and ()
+{
+  COND_COM *l, *r;
+
+  l = cond_term ();
+  if (cond_token == AND_AND)
+    {
+      r = cond_and ();
+      l = make_cond_node (COND_AND, (WORD_DESC *)NULL, l, r);
+    }
+  return l;
+}
+
+static int
+cond_skip_newlines ()
+{
+  while ((cond_token = read_token (READ)) == '\n')
+    {
+      if (SHOULD_PROMPT ())
+	prompt_again ();
+    }
+  return (cond_token);
+}
+
+#define COND_RETURN_ERROR() \
+  do { cond_token = COND_ERROR; return ((COND_COM *)NULL); } while (0)
+
+static COND_COM *
+cond_term ()
+{
+  WORD_DESC *op;
+  COND_COM *term, *tleft, *tright;
+  int tok, lineno;
+  char *etext;
+
+  /* Read a token.  It can be a left paren, a `!', a unary operator, or a
+     word that should be the first argument of a binary operator.  Start by
+     skipping newlines, since this is a compound command. */
+  tok = cond_skip_newlines ();
+  lineno = line_number;
+  if (tok == COND_END)
+    {
+      COND_RETURN_ERROR ();
+    }
+  else if (tok == '(')
+    {
+      term = cond_expr ();
+      if (cond_token != ')')
+	{
+	  if (term)
+	    dispose_cond_node (term);		/* ( */
+	  if (etext = error_token_from_token (cond_token))
+	    {
+	      parser_error (lineno, _("unexpected token `%s', expected `)'"), etext);
+	      free (etext);
+	    }
+	  else
+	    parser_error (lineno, _("expected `)'"));
+	  COND_RETURN_ERROR ();
+	}
+      term = make_cond_node (COND_EXPR, (WORD_DESC *)NULL, term, (COND_COM *)NULL);
+      (void)cond_skip_newlines ();
+    }
+  else if (tok == BANG || (tok == WORD && (yylval.word->word[0] == '!' && yylval.word->word[1] == '\0')))
+    {
+      if (tok == WORD)
+	dispose_word (yylval.word);	/* not needed */
+      term = cond_term ();
+      if (term)
+	term->flags |= CMD_INVERT_RETURN;
+    }
+  else if (tok == WORD && yylval.word->word[0] == '-' && yylval.word->word[1] && yylval.word->word[2] == 0 && test_unop (yylval.word->word))
+    {
+      op = yylval.word;
+      tok = read_token (READ);
+      if (tok == WORD)
+	{
+	  tleft = make_cond_node (COND_TERM, yylval.word, (COND_COM *)NULL, (COND_COM *)NULL);
+	  term = make_cond_node (COND_UNARY, op, tleft, (COND_COM *)NULL);
+	}
+      else
+	{
+	  dispose_word (op);
+	  if (etext = error_token_from_token (tok))
+	    {
+	      parser_error (line_number, _("unexpected argument `%s' to conditional unary operator"), etext);
+	      free (etext);
+	    }
+	  else
+	    parser_error (line_number, _("unexpected argument to conditional unary operator"));
+	  COND_RETURN_ERROR ();
+	}
+
+      (void)cond_skip_newlines ();
+    }
+  else if (tok == WORD)		/* left argument to binary operator */
+    {
+      /* lhs */
+      tleft = make_cond_node (COND_TERM, yylval.word, (COND_COM *)NULL, (COND_COM *)NULL);
+
+      /* binop */
+      tok = read_token (READ);
+      if (tok == WORD && test_binop (yylval.word->word))
+	{
+	  op = yylval.word;
+	  if (op->word[0] == '=' && (op->word[1] == '\0' || (op->word[1] == '=' && op->word[2] == '\0')))
+	    parser_state |= PST_EXTPAT;
+	  else if (op->word[0] == '!' && op->word[1] == '=' && op->word[2] == '\0')
+	    parser_state |= PST_EXTPAT;
+	}
+#if defined (COND_REGEXP)
+      else if (tok == WORD && STREQ (yylval.word->word, "=~"))
+	{
+	  op = yylval.word;
+	  parser_state |= PST_REGEXP;
+	}
+#endif
+      else if (tok == '<' || tok == '>')
+	op = make_word_from_token (tok);  /* ( */
+      /* There should be a check before blindly accepting the `)' that we have
+	 seen the opening `('. */
+      else if (tok == COND_END || tok == AND_AND || tok == OR_OR || tok == ')')
+	{
+	  /* Special case.  [[ x ]] is equivalent to [[ -n x ]], just like
+	     the test command.  Similarly for [[ x && expr ]] or
+	     [[ x || expr ]] or [[ (x) ]]. */
+	  op = make_word ("-n");
+	  term = make_cond_node (COND_UNARY, op, tleft, (COND_COM *)NULL);
+	  cond_token = tok;
+	  return (term);
+	}
+      else
+	{
+	  if (etext = error_token_from_token (tok))
+	    {
+	      parser_error (line_number, _("unexpected token `%s', conditional binary operator expected"), etext);
+	      free (etext);
+	    }
+	  else
+	    parser_error (line_number, _("conditional binary operator expected"));
+	  dispose_cond_node (tleft);
+	  COND_RETURN_ERROR ();
+	}
+
+      /* rhs */
+      if (parser_state & PST_EXTPAT)
+	extended_glob = 1;
+      tok = read_token (READ);
+      if (parser_state & PST_EXTPAT)
+	extended_glob = global_extglob;
+      parser_state &= ~(PST_REGEXP|PST_EXTPAT);
+
+      if (tok == WORD)
+	{
+	  tright = make_cond_node (COND_TERM, yylval.word, (COND_COM *)NULL, (COND_COM *)NULL);
+	  term = make_cond_node (COND_BINARY, op, tleft, tright);
+	}
+      else
+	{
+	  if (etext = error_token_from_token (tok))
+	    {
+	      parser_error (line_number, _("unexpected argument `%s' to conditional binary operator"), etext);
+	      free (etext);
+	    }
+	  else
+	    parser_error (line_number, _("unexpected argument to conditional binary operator"));
+	  dispose_cond_node (tleft);
+	  dispose_word (op);
+	  COND_RETURN_ERROR ();
+	}
+
+      (void)cond_skip_newlines ();
+    }
+  else
+    {
+      if (tok < 256)
+	parser_error (line_number, _("unexpected token `%c' in conditional command"), tok);
+      else if (etext = error_token_from_token (tok))
+	{
+	  parser_error (line_number, _("unexpected token `%s' in conditional command"), etext);
+	  free (etext);
+	}
+      else
+	parser_error (line_number, _("unexpected token %d in conditional command"), tok);
+      COND_RETURN_ERROR ();
+    }
+  return (term);
+}      
+
+/* This is kind of bogus -- we slip a mini recursive-descent parser in
+   here to handle the conditional statement syntax. */
+static COMMAND *
+parse_cond_command ()
+{
+  COND_COM *cexp;
+
+  global_extglob = extended_glob;
+  cexp = cond_expr ();
+  return (make_cond_command (cexp));
+}
+#endif
+
+#if defined (ARRAY_VARS)
+/* When this is called, it's guaranteed that we don't care about anything
+   in t beyond i.  We use a buffer with room for the characters we add just
+   in case assignment() ends up doing something like parsing a command
+   substitution that will reallocate atoken.  We don't want to write beyond
+   the end of an allocated buffer. */
+static int
+token_is_assignment (t, i)
+     char *t;
+     int i;
+{
+  int r;
+  char *atoken;
+
+  atoken = xmalloc (i + 3);
+  memcpy (atoken, t, i);
+  atoken[i] = '=';
+  atoken[i+1] = '\0';
+
+  r = assignment (atoken, (parser_state & PST_COMPASSIGN) != 0);
+
+  free (atoken);
+
+  /* XXX - check that r == i to avoid returning false positive for
+     t containing `=' before t[i]. */
+  return (r > 0 && r == i);
+}
+
+/* XXX - possible changes here for `+=' */
+static int
+token_is_ident (t, i)
+     char *t;
+     int i;
+{
+  unsigned char c;
+  int r;
+
+  c = t[i];
+  t[i] = '\0';
+  r = legal_identifier (t);
+  t[i] = c;
+  return r;
+}
+#endif
+
+static int
+read_token_word (character)
+     int character;
+{
+  /* The value for YYLVAL when a WORD is read. */
+  WORD_DESC *the_word;
+
+  /* Index into the token that we are building. */
+  int token_index;
+
+  /* ALL_DIGITS becomes zero when we see a non-digit. */
+  int all_digit_token;
+
+  /* DOLLAR_PRESENT becomes non-zero if we see a `$'. */
+  int dollar_present;
+
+  /* COMPOUND_ASSIGNMENT becomes non-zero if we are parsing a compound
+     assignment. */
+  int compound_assignment;
+
+  /* QUOTED becomes non-zero if we see one of ("), ('), (`), or (\). */
+  int quoted;
+
+  /* Non-zero means to ignore the value of the next character, and just
+     to add it no matter what. */
+  int pass_next_character;
+
+  /* The current delimiting character. */
+  int cd;
+  int result, peek_char;
+  char *ttok, *ttrans;
+  int ttoklen, ttranslen;
+  intmax_t lvalue;
+
+  if (token_buffer_size < TOKEN_DEFAULT_INITIAL_SIZE)
+    token = (char *)xrealloc (token, token_buffer_size = TOKEN_DEFAULT_INITIAL_SIZE);
+
+  token_index = 0;
+  all_digit_token = DIGIT (character);
+  dollar_present = quoted = pass_next_character = compound_assignment = 0;
+
+  for (;;)
+    {
+      if (character == EOF)
+	goto got_token;
+
+      if (pass_next_character)
+	{
+	  pass_next_character = 0;
+	  goto got_escaped_character;
+	}
+
+      cd = current_delimiter (dstack);
+
+      /* Handle backslashes.  Quote lots of things when not inside of
+	 double-quotes, quote some things inside of double-quotes. */
+      if MBTEST(character == '\\')
+	{
+	  peek_char = shell_getc (0);
+
+	  /* Backslash-newline is ignored in all cases except
+	     when quoted with single quotes. */
+	  if (peek_char == '\n')
+	    {
+	      character = '\n';
+	      goto next_character;
+	    }
+	  else
+	    {
+	      shell_ungetc (peek_char);
+
+	      /* If the next character is to be quoted, note it now. */
+	      if (cd == 0 || cd == '`' ||
+		  (cd == '"' && peek_char >= 0 && (sh_syntaxtab[peek_char] & CBSDQUOTE)))
+		pass_next_character++;
+
+	      quoted = 1;
+	      goto got_character;
+	    }
+	}
+
+      /* Parse a matched pair of quote characters. */
+      if MBTEST(shellquote (character))
+	{
+	  push_delimiter (dstack, character);
+	  ttok = parse_matched_pair (character, character, character, &ttoklen, (character == '`') ? P_COMMAND : 0);
+	  pop_delimiter (dstack);
+	  if (ttok == &matched_pair_error)
+	    return -1;		/* Bail immediately. */
+	  RESIZE_MALLOCED_BUFFER (token, token_index, ttoklen + 2,
+				  token_buffer_size, TOKEN_DEFAULT_GROW_SIZE);
+	  token[token_index++] = character;
+	  strcpy (token + token_index, ttok);
+	  token_index += ttoklen;
+	  all_digit_token = 0;
+	  if (character != '`')
+	    quoted = 1;
+	  dollar_present |= (character == '"' && strchr (ttok, '$') != 0);
+	  FREE (ttok);
+	  goto next_character;
+	}
+
+#ifdef COND_REGEXP
+      /* When parsing a regexp as a single word inside a conditional command,
+	 we need to special-case characters special to both the shell and
+	 regular expressions.  Right now, that is only '(' and '|'. */ /*)*/
+      if MBTEST((parser_state & PST_REGEXP) && (character == '(' || character == '|'))		/*)*/
+	{
+	  if (character == '|')
+	    goto got_character;
+
+	  push_delimiter (dstack, character);
+	  ttok = parse_matched_pair (cd, '(', ')', &ttoklen, 0);
+	  pop_delimiter (dstack);
+	  if (ttok == &matched_pair_error)
+	    return -1;		/* Bail immediately. */
+	  RESIZE_MALLOCED_BUFFER (token, token_index, ttoklen + 2,
+				  token_buffer_size, TOKEN_DEFAULT_GROW_SIZE);
+	  token[token_index++] = character;
+	  strcpy (token + token_index, ttok);
+	  token_index += ttoklen;
+	  FREE (ttok);
+	  dollar_present = all_digit_token = 0;
+	  goto next_character;
+	}
+#endif /* COND_REGEXP */
+
+#ifdef EXTENDED_GLOB
+      /* Parse a ksh-style extended pattern matching specification. */
+      if MBTEST(extended_glob && PATTERN_CHAR (character))
+	{
+	  peek_char = shell_getc (1);
+	  if MBTEST(peek_char == '(')		/* ) */
+	    {
+	      push_delimiter (dstack, peek_char);
+	      ttok = parse_matched_pair (cd, '(', ')', &ttoklen, 0);
+	      pop_delimiter (dstack);
+	      if (ttok == &matched_pair_error)
+		return -1;		/* Bail immediately. */
+	      RESIZE_MALLOCED_BUFFER (token, token_index, ttoklen + 3,
+				      token_buffer_size,
+				      TOKEN_DEFAULT_GROW_SIZE);
+	      token[token_index++] = character;
+	      token[token_index++] = peek_char;
+	      strcpy (token + token_index, ttok);
+	      token_index += ttoklen;
+	      FREE (ttok);
+	      dollar_present = all_digit_token = 0;
+	      goto next_character;
+	    }
+	  else
+	    shell_ungetc (peek_char);
+	}
+#endif /* EXTENDED_GLOB */
+
+      /* If the delimiter character is not single quote, parse some of
+	 the shell expansions that must be read as a single word. */
+      if (shellexp (character))
+	{
+	  peek_char = shell_getc (1);
+	  /* $(...), <(...), >(...), $((...)), ${...}, and $[...] constructs */
+	  if MBTEST(peek_char == '(' ||
+		((peek_char == '{' || peek_char == '[') && character == '$'))	/* ) ] } */
+	    {
+	      if (peek_char == '{')		/* } */
+		ttok = parse_matched_pair (cd, '{', '}', &ttoklen, P_FIRSTCLOSE|P_DOLBRACE);
+	      else if (peek_char == '(')		/* ) */
+		{
+		  /* XXX - push and pop the `(' as a delimiter for use by
+		     the command-oriented-history code.  This way newlines
+		     appearing in the $(...) string get added to the
+		     history literally rather than causing a possibly-
+		     incorrect `;' to be added. ) */
+		  push_delimiter (dstack, peek_char);
+		  ttok = parse_comsub (cd, '(', ')', &ttoklen, P_COMMAND);
+		  pop_delimiter (dstack);
+		}
+	      else
+		ttok = parse_matched_pair (cd, '[', ']', &ttoklen, 0);
+	      if (ttok == &matched_pair_error)
+		return -1;		/* Bail immediately. */
+	      RESIZE_MALLOCED_BUFFER (token, token_index, ttoklen + 3,
+				      token_buffer_size,
+				      TOKEN_DEFAULT_GROW_SIZE);
+	      token[token_index++] = character;
+	      token[token_index++] = peek_char;
+	      strcpy (token + token_index, ttok);
+	      token_index += ttoklen;
+	      FREE (ttok);
+	      dollar_present = 1;
+	      all_digit_token = 0;
+	      goto next_character;
+	    }
+	  /* This handles $'...' and $"..." new-style quoted strings. */
+	  else if MBTEST(character == '$' && (peek_char == '\'' || peek_char == '"'))
+	    {
+	      int first_line;
+
+	      first_line = line_number;
+	      push_delimiter (dstack, peek_char);
+	      ttok = parse_matched_pair (peek_char, peek_char, peek_char,
+					 &ttoklen,
+					 (peek_char == '\'') ? P_ALLOWESC : 0);
+	      pop_delimiter (dstack);
+	      if (ttok == &matched_pair_error)
+		return -1;
+	      if (peek_char == '\'')
+		{
+		  ttrans = ansiexpand (ttok, 0, ttoklen - 1, &ttranslen);
+		  free (ttok);
+
+		  /* Insert the single quotes and correctly quote any
+		     embedded single quotes (allowed because P_ALLOWESC was
+		     passed to parse_matched_pair). */
+		  ttok = sh_single_quote (ttrans);
+		  free (ttrans);
+		  ttranslen = strlen (ttok);
+		  ttrans = ttok;
+		}
+	      else
+		{
+		  /* Try to locale-expand the converted string. */
+		  ttrans = localeexpand (ttok, 0, ttoklen - 1, first_line, &ttranslen);
+		  free (ttok);
+
+		  /* Add the double quotes back */
+		  ttok = sh_mkdoublequoted (ttrans, ttranslen, 0);
+		  free (ttrans);
+		  ttranslen += 2;
+		  ttrans = ttok;
+		}
+
+	      RESIZE_MALLOCED_BUFFER (token, token_index, ttranslen + 1,
+				      token_buffer_size,
+				      TOKEN_DEFAULT_GROW_SIZE);
+	      strcpy (token + token_index, ttrans);
+	      token_index += ttranslen;
+	      FREE (ttrans);
+	      quoted = 1;
+	      all_digit_token = 0;
+	      goto next_character;
+	    }
+	  /* This could eventually be extended to recognize all of the
+	     shell's single-character parameter expansions, and set flags.*/
+	  else if MBTEST(character == '$' && peek_char == '$')
+	    {
+	      RESIZE_MALLOCED_BUFFER (token, token_index, 3,
+				      token_buffer_size,
+				      TOKEN_DEFAULT_GROW_SIZE);
+	      token[token_index++] = '$';
+	      token[token_index++] = peek_char;
+	      dollar_present = 1;
+	      all_digit_token = 0;
+	      goto next_character;
+	    }
+	  else
+	    shell_ungetc (peek_char);
+	}
+
+#if defined (ARRAY_VARS)
+      /* Identify possible array subscript assignment; match [...].  If
+	 parser_state&PST_COMPASSIGN, we need to parse [sub]=words treating
+	 `sub' as if it were enclosed in double quotes. */
+      else if MBTEST(character == '[' &&		/* ] */
+		     ((token_index > 0 && assignment_acceptable (last_read_token) && token_is_ident (token, token_index)) ||
+		      (token_index == 0 && (parser_state&PST_COMPASSIGN))))
+        {
+	  ttok = parse_matched_pair (cd, '[', ']', &ttoklen, P_ARRAYSUB);
+	  if (ttok == &matched_pair_error)
+	    return -1;		/* Bail immediately. */
+	  RESIZE_MALLOCED_BUFFER (token, token_index, ttoklen + 2,
+				  token_buffer_size,
+				  TOKEN_DEFAULT_GROW_SIZE);
+	  token[token_index++] = character;
+	  strcpy (token + token_index, ttok);
+	  token_index += ttoklen;
+	  FREE (ttok);
+	  all_digit_token = 0;
+	  goto next_character;
+        }
+      /* Identify possible compound array variable assignment. */
+      else if MBTEST(character == '=' && token_index > 0 && (assignment_acceptable (last_read_token) || (parser_state & PST_ASSIGNOK)) && token_is_assignment (token, token_index))
+	{
+	  peek_char = shell_getc (1);
+	  if MBTEST(peek_char == '(')		/* ) */
+	    {
+	      ttok = parse_compound_assignment (&ttoklen);
+
+	      RESIZE_MALLOCED_BUFFER (token, token_index, ttoklen + 4,
+				      token_buffer_size,
+				      TOKEN_DEFAULT_GROW_SIZE);
+
+	      token[token_index++] = '=';
+	      token[token_index++] = '(';
+	      if (ttok)
+		{
+		  strcpy (token + token_index, ttok);
+		  token_index += ttoklen;
+		}
+	      token[token_index++] = ')';
+	      FREE (ttok);
+	      all_digit_token = 0;
+	      compound_assignment = 1;
+#if 1
+	      goto next_character;
+#else
+	      goto got_token;		/* ksh93 seems to do this */
+#endif
+	    }
+	  else
+	    shell_ungetc (peek_char);
+	}
+#endif
+
+      /* When not parsing a multi-character word construct, shell meta-
+	 characters break words. */
+      if MBTEST(shellbreak (character))
+	{
+	  shell_ungetc (character);
+	  goto got_token;
+	}
+
+got_character:
+      if (character == CTLESC || character == CTLNUL)
+	{
+	  RESIZE_MALLOCED_BUFFER (token, token_index, 2, token_buffer_size,
+				  TOKEN_DEFAULT_GROW_SIZE);
+	  token[token_index++] = CTLESC;
+	}
+      else
+got_escaped_character:
+	RESIZE_MALLOCED_BUFFER (token, token_index, 1, token_buffer_size,
+				TOKEN_DEFAULT_GROW_SIZE);
+
+      token[token_index++] = character;
+
+      all_digit_token &= DIGIT (character);
+      dollar_present |= character == '$';
+
+    next_character:
+      if (character == '\n' && SHOULD_PROMPT ())
+	prompt_again ();
+
+      /* We want to remove quoted newlines (that is, a \<newline> pair)
+	 unless we are within single quotes or pass_next_character is
+	 set (the shell equivalent of literal-next). */
+      cd = current_delimiter (dstack);
+      character = shell_getc (cd != '\'' && pass_next_character == 0);
+    }	/* end for (;;) */
+
+got_token:
+
+  /* Calls to RESIZE_MALLOCED_BUFFER ensure there is sufficient room. */
+  token[token_index] = '\0';
+
+  /* Check to see what thing we should return.  If the last_read_token
+     is a `<', or a `&', or the character which ended this token is
+     a '>' or '<', then, and ONLY then, is this input token a NUMBER.
+     Otherwise, it is just a word, and should be returned as such. */
+  if MBTEST(all_digit_token && (character == '<' || character == '>' ||
+		    last_read_token == LESS_AND ||
+		    last_read_token == GREATER_AND))
+      {
+	if (legal_number (token, &lvalue) && (int)lvalue == lvalue)
+	  {
+	    yylval.number = lvalue;
+	    return (NUMBER);
+	  }
+      }
+
+  /* Check for special case tokens. */
+  result = (last_shell_getc_is_singlebyte) ? special_case_tokens (token) : -1;
+  if (result >= 0)
+    return result;
+
+#if defined (ALIAS)
+  /* Posix.2 does not allow reserved words to be aliased, so check for all
+     of them, including special cases, before expanding the current token
+     as an alias. */
+  if MBTEST(posixly_correct)
+    CHECK_FOR_RESERVED_WORD (token);
+
+  /* Aliases are expanded iff EXPAND_ALIASES is non-zero, and quoting
+     inhibits alias expansion. */
+  if (expand_aliases && quoted == 0)
+    {
+      result = alias_expand_token (token);
+      if (result == RE_READ_TOKEN)
+	return (RE_READ_TOKEN);
+      else if (result == NO_EXPANSION)
+	parser_state &= ~PST_ALEXPNEXT;
+    }
+
+  /* If not in Posix.2 mode, check for reserved words after alias
+     expansion. */
+  if MBTEST(posixly_correct == 0)
+#endif
+    CHECK_FOR_RESERVED_WORD (token);
+
+  the_word = alloc_word_desc ();
+  the_word->word = (char *)xmalloc (1 + token_index);
+  the_word->flags = 0;
+  strcpy (the_word->word, token);
+  if (dollar_present)
+    the_word->flags |= W_HASDOLLAR;
+  if (quoted)
+    the_word->flags |= W_QUOTED;		/*(*/
+  if (compound_assignment && token[token_index-1] == ')')
+    the_word->flags |= W_COMPASSIGN;
+  /* A word is an assignment if it appears at the beginning of a
+     simple command, or after another assignment word.  This is
+     context-dependent, so it cannot be handled in the grammar. */
+  if (assignment (token, (parser_state & PST_COMPASSIGN) != 0))
+    {
+      the_word->flags |= W_ASSIGNMENT;
+      /* Don't perform word splitting on assignment statements. */
+      if (assignment_acceptable (last_read_token) || (parser_state & PST_COMPASSIGN) != 0)
+	{
+	  the_word->flags |= W_NOSPLIT;
+	  if (parser_state & PST_COMPASSIGN)
+	    the_word->flags |= W_NOGLOB;	/* XXX - W_NOBRACE? */
+	}
+    }
+
+  if (command_token_position (last_read_token))
+    {
+      struct builtin *b;
+      b = builtin_address_internal (token, 0);
+      if (b && (b->flags & ASSIGNMENT_BUILTIN))
+	parser_state |= PST_ASSIGNOK;
+      else if (STREQ (token, "eval") || STREQ (token, "let"))
+	parser_state |= PST_ASSIGNOK;
+    }
+
+  yylval.word = the_word;
+
+  /* should we check that quoted == 0 as well? */
+  if (token[0] == '{' && token[token_index-1] == '}' &&
+      (character == '<' || character == '>'))
+    {
+      /* can use token; already copied to the_word */
+      token[token_index-1] = '\0';
+#if defined (ARRAY_VARS)
+      if (legal_identifier (token+1) || valid_array_reference (token+1, 0))
+#else
+      if (legal_identifier (token+1))
+#endif
+	{
+	  strcpy (the_word->word, token+1);
+/* itrace("read_token_word: returning REDIR_WORD for %s", the_word->word); */
+	  yylval.word = the_word;	/* accommodate recursive call */
+	  return (REDIR_WORD);
+	}
+      else
+        /* valid_array_reference can call the parser recursively; need to
+	   make sure that yylval.word doesn't change if we are going to
+	   return WORD or ASSIGNMENT_WORD */
+        yylval.word = the_word;
+    }
+
+  result = ((the_word->flags & (W_ASSIGNMENT|W_NOSPLIT)) == (W_ASSIGNMENT|W_NOSPLIT))
+		? ASSIGNMENT_WORD : WORD;
+
+  switch (last_read_token)
+    {
+    case FUNCTION:
+      parser_state |= PST_ALLOWOPNBRC;
+      function_dstart = line_number;
+      break;
+    case CASE:
+    case SELECT:
+    case FOR:
+      if (word_top < MAX_CASE_NEST)
+	word_top++;
+      word_lineno[word_top] = line_number;
+      expecting_in_token++;
+      break;
+    }
+
+  return (result);
+}
+
+/* Return 1 if TOKSYM is a token that after being read would allow
+   a reserved word to be seen, else 0. */
+static int
+reserved_word_acceptable (toksym)
+     int toksym;
+{
+  switch (toksym)
+    {
+    case '\n':
+    case ';':
+    case '(':
+    case ')':
+    case '|':
+    case '&':
+    case '{':
+    case '}':		/* XXX */
+    case AND_AND:
+    case BANG:
+    case BAR_AND:
+    case DO:
+    case DONE:
+    case ELIF:
+    case ELSE:
+    case ESAC:
+    case FI:
+    case IF:
+    case OR_OR:
+    case SEMI_SEMI:
+    case SEMI_AND:
+    case SEMI_SEMI_AND:
+    case THEN:
+    case TIME:
+    case TIMEOPT:
+    case TIMEIGN:
+    case COPROC:
+    case UNTIL:
+    case WHILE:
+    case 0:
+      return 1;
+    default:
+#if defined (COPROCESS_SUPPORT)
+      if (last_read_token == WORD && token_before_that == COPROC)
+	return 1;
+#endif
+      if (last_read_token == WORD && token_before_that == FUNCTION)
+	return 1;
+      return 0;
+    }
+}
+    
+/* Return the index of TOKEN in the alist of reserved words, or -1 if
+   TOKEN is not a shell reserved word. */
+int
+find_reserved_word (tokstr)
+     char *tokstr;
+{
+  int i;
+  for (i = 0; word_token_alist[i].word; i++)
+    if (STREQ (tokstr, word_token_alist[i].word))
+      return i;
+  return -1;
+}
+
+/* An interface to let the rest of the shell (primarily the completion
+   system) know what the parser is expecting. */
+int
+parser_in_command_position ()
+{
+  return (command_token_position (last_read_token));
+}
+
+#if 0
+#if defined (READLINE)
+/* Called after each time readline is called.  This insures that whatever
+   the new prompt string is gets propagated to readline's local prompt
+   variable. */
+static void
+reset_readline_prompt ()
+{
+  char *temp_prompt;
+
+  if (prompt_string_pointer)
+    {
+      temp_prompt = (*prompt_string_pointer)
+			? decode_prompt_string (*prompt_string_pointer)
+			: (char *)NULL;
+
+      if (temp_prompt == 0)
+	{
+	  temp_prompt = (char *)xmalloc (1);
+	  temp_prompt[0] = '\0';
+	}
+
+      FREE (current_readline_prompt);
+      current_readline_prompt = temp_prompt;
+    }
+}
+#endif /* READLINE */
+#endif /* 0 */
+
+#if defined (HISTORY)
+/* A list of tokens which can be followed by newlines, but not by
+   semi-colons.  When concatenating multiple lines of history, the
+   newline separator for such tokens is replaced with a space. */
+static const int no_semi_successors[] = {
+  '\n', '{', '(', ')', ';', '&', '|',
+  CASE, DO, ELSE, IF, SEMI_SEMI, SEMI_AND, SEMI_SEMI_AND, THEN, UNTIL,
+  WHILE, AND_AND, OR_OR, IN,
+  0
+};
+
+/* If we are not within a delimited expression, try to be smart
+   about which separators can be semi-colons and which must be
+   newlines.  Returns the string that should be added into the
+   history entry.  LINE is the line we're about to add; it helps
+   make some more intelligent decisions in certain cases. */
+char *
+history_delimiting_chars (line)
+     const char *line;
+{
+  static int last_was_heredoc = 0;	/* was the last entry the start of a here document? */
+  register int i;
+
+  if ((parser_state & PST_HEREDOC) == 0)
+    last_was_heredoc = 0;
+
+  if (dstack.delimiter_depth != 0)
+    return ("\n");
+
+  /* We look for current_command_line_count == 2 because we are looking to
+     add the first line of the body of the here document (the second line
+     of the command).  We also keep LAST_WAS_HEREDOC as a private sentinel
+     variable to note when we think we added the first line of a here doc
+     (the one with a "<<" somewhere in it) */
+  if (parser_state & PST_HEREDOC)
+    {
+      if (last_was_heredoc)
+	{
+	  last_was_heredoc = 0;
+	  return "\n";
+	}
+      return (here_doc_first_line ? "\n" : "");
+    }
+
+  if (parser_state & PST_COMPASSIGN)
+    return (" ");
+
+  /* First, handle some special cases. */
+  /*(*/
+  /* If we just read `()', assume it's a function definition, and don't
+     add a semicolon.  If the token before the `)' was not `(', and we're
+     not in the midst of parsing a case statement, assume it's a
+     parenthesized command and add the semicolon. */
+  /*)(*/
+  if (token_before_that == ')')
+    {
+      if (two_tokens_ago == '(')	/*)*/	/* function def */
+	return " ";
+      /* This does not work for subshells inside case statement
+	 command lists.  It's a suboptimal solution. */
+      else if (parser_state & PST_CASESTMT)	/* case statement pattern */
+	return " ";
+      else
+	return "; ";				/* (...) subshell */
+    }
+  else if (token_before_that == WORD && two_tokens_ago == FUNCTION)
+    return " ";		/* function def using `function name' without `()' */
+
+  /* If we're not in a here document, but we think we're about to parse one,
+     and we would otherwise return a `;', return a newline to delimit the
+     line with the here-doc delimiter */
+  else if ((parser_state & PST_HEREDOC) == 0 && current_command_line_count > 1 && last_read_token == '\n' && strstr (line, "<<"))
+    {
+      last_was_heredoc = 1;
+      return "\n";
+    }
+  else if ((parser_state & PST_HEREDOC) == 0 && current_command_line_count > 1 && need_here_doc > 0)
+    return "\n";
+  else if (token_before_that == WORD && two_tokens_ago == FOR)
+    {
+      /* Tricky.  `for i\nin ...' should not have a semicolon, but
+	 `for i\ndo ...' should.  We do what we can. */
+      for (i = shell_input_line_index; whitespace (shell_input_line[i]); i++)
+	;
+      if (shell_input_line[i] && shell_input_line[i] == 'i' && shell_input_line[i+1] == 'n')
+	return " ";
+      return ";";
+    }
+  else if (two_tokens_ago == CASE && token_before_that == WORD && (parser_state & PST_CASESTMT))
+    return " ";
+
+  for (i = 0; no_semi_successors[i]; i++)
+    {
+      if (token_before_that == no_semi_successors[i])
+	return (" ");
+    }
+
+  if (line_isblank (line))
+    return ("");
+
+  return ("; ");
+}
+#endif /* HISTORY */
+
+/* Issue a prompt, or prepare to issue a prompt when the next character
+   is read. */
+static void
+prompt_again ()
+{
+  char *temp_prompt;
+
+  if (interactive == 0 || expanding_alias ())	/* XXX */
+    return;
+
+  ps1_prompt = get_string_value ("PS1");
+  ps2_prompt = get_string_value ("PS2");
+
+  ps0_prompt = get_string_value ("PS0");
+
+  if (!prompt_string_pointer)
+    prompt_string_pointer = &ps1_prompt;
+
+  temp_prompt = *prompt_string_pointer
+			? decode_prompt_string (*prompt_string_pointer)
+			: (char *)NULL;
+
+  if (temp_prompt == 0)
+    {
+      temp_prompt = (char *)xmalloc (1);
+      temp_prompt[0] = '\0';
+    }
+
+  current_prompt_string = *prompt_string_pointer;
+  prompt_string_pointer = &ps2_prompt;
+
+#if defined (READLINE)
+  if (!no_line_editing)
+    {
+      FREE (current_readline_prompt);
+      current_readline_prompt = temp_prompt;
+    }
+  else
+#endif	/* READLINE */
+    {
+      FREE (current_decoded_prompt);
+      current_decoded_prompt = temp_prompt;
+    }
+}
+
+int
+get_current_prompt_level ()
+{
+  return ((current_prompt_string && current_prompt_string == ps2_prompt) ? 2 : 1);
+}
+
+void
+set_current_prompt_level (x)
+     int x;
+{
+  prompt_string_pointer = (x == 2) ? &ps2_prompt : &ps1_prompt;
+  current_prompt_string = *prompt_string_pointer;
+}
+      
+static void
+print_prompt ()
+{
+  fprintf (stderr, "%s", current_decoded_prompt);
+  fflush (stderr);
+}
+
+#if defined (HISTORY)
+  /* The history library increments the history offset as soon as it stores
+     the first line of a potentially multi-line command, so we compensate
+     here by returning one fewer when appropriate. */
+static int
+prompt_history_number (pmt)
+     char *pmt;
+{
+  int ret;
+
+  ret = history_number ();
+  if (ret == 1)
+    return ret;
+
+  if (pmt == ps1_prompt)	/* are we expanding $PS1? */
+    return ret;
+  else if (pmt == ps2_prompt && command_oriented_history == 0)
+    return ret;			/* not command oriented history */
+  else if (pmt == ps2_prompt && command_oriented_history && current_command_first_line_saved)
+    return ret - 1;
+  else
+    return ret - 1;		/* PS0, PS4, ${var@P}, PS2 other cases */
+}
+#endif
+
+/* Return a string which will be printed as a prompt.  The string
+   may contain special characters which are decoded as follows:
+
+	\a	bell (ascii 07)
+	\d	the date in Day Mon Date format
+	\e	escape (ascii 033)
+	\h	the hostname up to the first `.'
+	\H	the hostname
+	\j	the number of active jobs
+	\l	the basename of the shell's tty device name
+	\n	CRLF
+	\r	CR
+	\s	the name of the shell
+	\t	the time in 24-hour hh:mm:ss format
+	\T	the time in 12-hour hh:mm:ss format
+	\@	the time in 12-hour hh:mm am/pm format
+	\A	the time in 24-hour hh:mm format
+	\D{fmt}	the result of passing FMT to strftime(3)
+	\u	your username
+	\v	the version of bash (e.g., 2.00)
+	\V	the release of bash, version + patchlevel (e.g., 2.00.0)
+	\w	the current working directory
+	\W	the last element of $PWD
+	\!	the history number of this command
+	\#	the command number of this command
+	\$	a $ or a # if you are root
+	\nnn	character code nnn in octal
+	\\	a backslash
+	\[	begin a sequence of non-printing chars
+	\]	end a sequence of non-printing chars
+*/
+#define PROMPT_GROWTH 48
+char *
+decode_prompt_string (string)
+     char *string;
+{
+  WORD_LIST *list;
+  char *result, *t, *orig_string;
+  struct dstack save_dstack;
+  int last_exit_value, last_comsub_pid;
+#if defined (PROMPT_STRING_DECODE)
+  size_t result_size;
+  int result_index;
+  int c, n, i;
+  char *temp, *t_host, octal_string[4];
+  struct tm *tm;  
+  time_t the_time;
+  char timebuf[128];
+  char *timefmt;
+
+  result = (char *)xmalloc (result_size = PROMPT_GROWTH);
+  result[result_index = 0] = 0;
+  temp = (char *)NULL;
+  orig_string = string;
+
+  while (c = *string++)
+    {
+      if (posixly_correct && c == '!')
+	{
+	  if (*string == '!')
+	    {
+	      temp = savestring ("!");
+	      goto add_string;
+	    }
+	  else
+	    {
+#if !defined (HISTORY)
+		temp = savestring ("1");
+#else /* HISTORY */
+		temp = itos (prompt_history_number (orig_string));
+#endif /* HISTORY */
+		string--;	/* add_string increments string again. */
+		goto add_string;
+	    }
+	}
+      if (c == '\\')
+	{
+	  c = *string;
+
+	  switch (c)
+	    {
+	    case '0':
+	    case '1':
+	    case '2':
+	    case '3':
+	    case '4':
+	    case '5':
+	    case '6':
+	    case '7':
+	      strncpy (octal_string, string, 3);
+	      octal_string[3] = '\0';
+
+	      n = read_octal (octal_string);
+	      temp = (char *)xmalloc (3);
+
+	      if (n == CTLESC || n == CTLNUL)
+		{
+		  temp[0] = CTLESC;
+		  temp[1] = n;
+		  temp[2] = '\0';
+		}
+	      else if (n == -1)
+		{
+		  temp[0] = '\\';
+		  temp[1] = '\0';
+		}
+	      else
+		{
+		  temp[0] = n;
+		  temp[1] = '\0';
+		}
+
+	      for (c = 0; n != -1 && c < 3 && ISOCTAL (*string); c++)
+		string++;
+
+	      c = 0;		/* tested at add_string: */
+	      goto add_string;
+
+	    case 'd':
+	    case 't':
+	    case 'T':
+	    case '@':
+	    case 'A':
+	      /* Make the current time/date into a string. */
+	      (void) time (&the_time);
+#if defined (HAVE_TZSET)
+	      sv_tz ("TZ");		/* XXX -- just make sure */
+#endif
+	      tm = localtime (&the_time);
+
+	      if (c == 'd')
+		n = strftime (timebuf, sizeof (timebuf), "%a %b %d", tm);
+	      else if (c == 't')
+		n = strftime (timebuf, sizeof (timebuf), "%H:%M:%S", tm);
+	      else if (c == 'T')
+		n = strftime (timebuf, sizeof (timebuf), "%I:%M:%S", tm);
+	      else if (c == '@')
+		n = strftime (timebuf, sizeof (timebuf), "%I:%M %p", tm);
+	      else if (c == 'A')
+		n = strftime (timebuf, sizeof (timebuf), "%H:%M", tm);
+
+	      if (n == 0)
+		timebuf[0] = '\0';
+	      else
+		timebuf[sizeof(timebuf) - 1] = '\0';
+
+	      temp = savestring (timebuf);
+	      goto add_string;
+
+	    case 'D':		/* strftime format */
+	      if (string[1] != '{')		/* } */
+		goto not_escape;
+
+	      (void) time (&the_time);
+	      tm = localtime (&the_time);
+	      string += 2;			/* skip { */
+	      timefmt = xmalloc (strlen (string) + 3);
+	      for (t = timefmt; *string && *string != '}'; )
+		*t++ = *string++;
+	      *t = '\0';
+	      c = *string;	/* tested at add_string */
+	      if (timefmt[0] == '\0')
+		{
+		  timefmt[0] = '%';
+		  timefmt[1] = 'X';	/* locale-specific current time */
+		  timefmt[2] = '\0';
+		}
+	      n = strftime (timebuf, sizeof (timebuf), timefmt, tm);
+	      free (timefmt);
+
+	      if (n == 0)
+		timebuf[0] = '\0';
+	      else
+		timebuf[sizeof(timebuf) - 1] = '\0';
+
+	      if (promptvars || posixly_correct)
+		/* Make sure that expand_prompt_string is called with a
+		   second argument of Q_DOUBLE_QUOTES if we use this
+		   function here. */
+		temp = sh_backslash_quote_for_double_quotes (timebuf);
+	      else
+		temp = savestring (timebuf);
+	      goto add_string;
+	      
+	    case 'n':
+	      temp = (char *)xmalloc (3);
+	      temp[0] = no_line_editing ? '\n' : '\r';
+	      temp[1] = no_line_editing ? '\0' : '\n';
+	      temp[2] = '\0';
+	      goto add_string;
+
+	    case 's':
+	      temp = base_pathname (shell_name);
+	      /* Try to quote anything the user can set in the file system */
+	      if (promptvars || posixly_correct)
+		temp = sh_backslash_quote_for_double_quotes (temp);
+	      else
+		temp = savestring (temp);
+	      goto add_string;
+
+	    case 'v':
+	    case 'V':
+	      temp = (char *)xmalloc (16);
+	      if (c == 'v')
+		strcpy (temp, dist_version);
+	      else
+		sprintf (temp, "%s.%d", dist_version, patch_level);
+	      goto add_string;
+
+	    case 'w':
+	    case 'W':
+	      {
+		/* Use the value of PWD because it is much more efficient. */
+		char t_string[PATH_MAX];
+		int tlen;
+
+		temp = get_string_value ("PWD");
+
+		if (temp == 0)
+		  {
+		    if (getcwd (t_string, sizeof(t_string)) == 0)
+		      {
+			t_string[0] = '.';
+			tlen = 1;
+		      }
+		    else
+		      tlen = strlen (t_string);
+		  }
+		else
+		  {
+		    tlen = sizeof (t_string) - 1;
+		    strncpy (t_string, temp, tlen);
+		  }
+		t_string[tlen] = '\0';
+
+#if defined (MACOSX)
+		/* Convert from "fs" format to "input" format */
+		temp = fnx_fromfs (t_string, strlen (t_string));
+		if (temp != t_string)
+		  strcpy (t_string, temp);
+#endif
+
+#define ROOT_PATH(x)	((x)[0] == '/' && (x)[1] == 0)
+#define DOUBLE_SLASH_ROOT(x)	((x)[0] == '/' && (x)[1] == '/' && (x)[2] == 0)
+		/* Abbreviate \W as ~ if $PWD == $HOME */
+		if (c == 'W' && (((t = get_string_value ("HOME")) == 0) || STREQ (t, t_string) == 0))
+		  {
+		    if (ROOT_PATH (t_string) == 0 && DOUBLE_SLASH_ROOT (t_string) == 0)
+		      {
+			t = strrchr (t_string, '/');
+			if (t)
+			  memmove (t_string, t + 1, strlen (t));	/* strlen(t) to copy NULL */
+		      }
+		  }
+#undef ROOT_PATH
+#undef DOUBLE_SLASH_ROOT
+		else
+		  {
+		    /* polite_directory_format is guaranteed to return a string
+		       no longer than PATH_MAX - 1 characters. */
+		    temp = polite_directory_format (t_string);
+		    if (temp != t_string)
+		      strcpy (t_string, temp);
+		  }
+
+		temp = trim_pathname (t_string, PATH_MAX - 1);
+		/* If we're going to be expanding the prompt string later,
+		   quote the directory name. */
+		if (promptvars || posixly_correct)
+		  /* Make sure that expand_prompt_string is called with a
+		     second argument of Q_DOUBLE_QUOTES if we use this
+		     function here. */
+		  temp = sh_backslash_quote_for_double_quotes (t_string);
+		else
+		  temp = savestring (t_string);
+
+		goto add_string;
+	      }
+
+	    case 'u':
+	      if (current_user.user_name == 0)
+		get_current_user_info ();
+	      temp = savestring (current_user.user_name);
+	      goto add_string;
+
+	    case 'h':
+	    case 'H':
+	      t_host = savestring (current_host_name);
+	      if (c == 'h' && (t = (char *)strchr (t_host, '.')))
+		*t = '\0';
+	      if (promptvars || posixly_correct)
+		/* Make sure that expand_prompt_string is called with a
+		   second argument of Q_DOUBLE_QUOTES if we use this
+		   function here. */
+		temp = sh_backslash_quote_for_double_quotes (t_host);
+	      else
+		temp = savestring (t_host);
+	      free (t_host);
+	      goto add_string;
+
+	    case '#':
+	      n = current_command_number;
+	      /* If we have already incremented current_command_number (PS4,
+		 ${var@P}), compensate */
+	      if (orig_string != ps0_prompt && orig_string != ps1_prompt && orig_string != ps2_prompt)
+		n--;
+	      temp = itos (n);
+	      goto add_string;
+
+	    case '!':
+#if !defined (HISTORY)
+	      temp = savestring ("1");
+#else /* HISTORY */
+	      temp = itos (prompt_history_number (orig_string));
+#endif /* HISTORY */
+	      goto add_string;
+
+	    case '$':
+	      t = temp = (char *)xmalloc (3);
+	      if ((promptvars || posixly_correct) && (current_user.euid != 0))
+		*t++ = '\\';
+	      *t++ = current_user.euid == 0 ? '#' : '$';
+	      *t = '\0';
+	      goto add_string;
+
+	    case 'j':
+	      temp = itos (count_all_jobs ());
+	      goto add_string;
+
+	    case 'l':
+#if defined (HAVE_TTYNAME)
+	      temp = (char *)ttyname (fileno (stdin));
+	      t = temp ? base_pathname (temp) : "tty";
+	      temp = savestring (t);
+#else
+	      temp = savestring ("tty");
+#endif /* !HAVE_TTYNAME */
+	      goto add_string;
+
+#if defined (READLINE)
+	    case '[':
+	    case ']':
+	      if (no_line_editing)
+		{
+		  string++;
+		  break;
+		}
+	      temp = (char *)xmalloc (3);
+	      n = (c == '[') ? RL_PROMPT_START_IGNORE : RL_PROMPT_END_IGNORE;
+	      i = 0;
+	      if (n == CTLESC || n == CTLNUL)
+		temp[i++] = CTLESC;
+	      temp[i++] = n;
+	      temp[i] = '\0';
+	      goto add_string;
+#endif /* READLINE */
+
+	    case '\\':
+	    case 'a':
+	    case 'e':
+	    case 'r':
+	      temp = (char *)xmalloc (2);
+	      if (c == 'a')
+		temp[0] = '\07';
+	      else if (c == 'e')
+		temp[0] = '\033';
+	      else if (c == 'r')
+		temp[0] = '\r';
+	      else			/* (c == '\\') */
+	        temp[0] = c;
+	      temp[1] = '\0';
+	      goto add_string;
+
+	    default:
+not_escape:
+	      temp = (char *)xmalloc (3);
+	      temp[0] = '\\';
+	      temp[1] = c;
+	      temp[2] = '\0';
+
+	    add_string:
+	      if (c)
+		string++;
+	      result =
+		sub_append_string (temp, result, &result_index, &result_size);
+	      temp = (char *)NULL; /* Freed in sub_append_string (). */
+	      result[result_index] = '\0';
+	      break;
+	    }
+	}
+      else
+	{
+	  RESIZE_MALLOCED_BUFFER (result, result_index, 3, result_size, PROMPT_GROWTH);
+	  /* dequote_string should take care of removing this if we are not
+	     performing the rest of the word expansions. */
+	  if (c == CTLESC || c == CTLNUL)
+	    result[result_index++] = CTLESC;
+	  result[result_index++] = c;
+	  result[result_index] = '\0';
+	}
+    }
+#else /* !PROMPT_STRING_DECODE */
+  result = savestring (string);
+#endif /* !PROMPT_STRING_DECODE */
+
+  /* Save the delimiter stack and point `dstack' to temp space so any
+     command substitutions in the prompt string won't result in screwing
+     up the parser's quoting state. */
+  save_dstack = dstack;
+  dstack = temp_dstack;
+  dstack.delimiter_depth = 0;
+
+  /* Perform variable and parameter expansion and command substitution on
+     the prompt string. */
+  if (promptvars || posixly_correct)
+    {
+      last_exit_value = last_command_exit_value;
+      last_comsub_pid = last_command_subst_pid;
+      list = expand_prompt_string (result, Q_DOUBLE_QUOTES, 0);
+      free (result);
+      result = string_list (list);
+      dispose_words (list);
+      last_command_exit_value = last_exit_value;
+      last_command_subst_pid = last_comsub_pid;
+    }
+  else
+    {
+      t = dequote_string (result);
+      free (result);
+      result = t;
+    }
+
+  dstack = save_dstack;
+
+  return (result);
+}
+
+/************************************************
+ *						*
+ *		ERROR HANDLING			*
+ *						*
+ ************************************************/
+
+/* Report a syntax error, and restart the parser.  Call here for fatal
+   errors. */
+int
+yyerror (msg)
+     const char *msg;
+{
+  report_syntax_error ((char *)NULL);
+  reset_parser ();
+  return (0);
+}
+
+static char *
+error_token_from_token (tok)
+     int tok;
+{
+  char *t;
+
+  if (t = find_token_in_alist (tok, word_token_alist, 0))
+    return t;
+
+  if (t = find_token_in_alist (tok, other_token_alist, 0))
+    return t;
+
+  t = (char *)NULL;
+  /* This stuff is dicy and needs closer inspection */
+  switch (current_token)
+    {
+    case WORD:
+    case ASSIGNMENT_WORD:
+      if (yylval.word)
+	t = savestring (yylval.word->word);
+      break;
+    case NUMBER:
+      t = itos (yylval.number);
+      break;
+    case ARITH_CMD:
+      if (yylval.word_list)
+        t = string_list (yylval.word_list);
+      break;
+    case ARITH_FOR_EXPRS:
+      if (yylval.word_list)
+	t = string_list_internal (yylval.word_list, " ; ");
+      break;
+    case COND_CMD:
+      t = (char *)NULL;		/* punt */
+      break;
+    }
+
+  return t;
+}
+
+static char *
+error_token_from_text ()
+{
+  char *msg, *t;
+  int token_end, i;
+
+  t = shell_input_line;
+  i = shell_input_line_index;
+  token_end = 0;
+  msg = (char *)NULL;
+
+  if (i && t[i] == '\0')
+    i--;
+
+  while (i && (whitespace (t[i]) || t[i] == '\n'))
+    i--;
+
+  if (i)
+    token_end = i + 1;
+
+  while (i && (member (t[i], " \n\t;|&") == 0))
+    i--;
+
+  while (i != token_end && (whitespace (t[i]) || t[i] == '\n'))
+    i++;
+
+  /* Return our idea of the offending token. */
+  if (token_end || (i == 0 && token_end == 0))
+    {
+      if (token_end)
+	msg = substring (t, i, token_end);
+      else	/* one-character token */
+	{
+	  msg = (char *)xmalloc (2);
+	  msg[0] = t[i];
+	  msg[1] = '\0';
+	}
+    }
+
+  return (msg);
+}
+
+static void
+print_offending_line ()
+{
+  char *msg;
+  int token_end;
+
+  msg = savestring (shell_input_line);
+  token_end = strlen (msg);
+  while (token_end && msg[token_end - 1] == '\n')
+    msg[--token_end] = '\0';
+
+  parser_error (line_number, "`%s'", msg);
+  free (msg);
+}
+
+/* Report a syntax error with line numbers, etc.
+   Call here for recoverable errors.  If you have a message to print,
+   then place it in MESSAGE, otherwise pass NULL and this will figure
+   out an appropriate message for you. */
+static void
+report_syntax_error (message)
+     char *message;
+{
+  char *msg, *p;
+
+  if (message)
+    {
+      parser_error (line_number, "%s", message);
+      if (interactive && EOF_Reached)
+	EOF_Reached = 0;
+      last_command_exit_value = (executing_builtin && parse_and_execute_level) ? EX_BADSYNTAX : EX_BADUSAGE;
+      set_pipestatus_from_exit (last_command_exit_value);
+      return;
+    }
+
+  /* If the line of input we're reading is not null, try to find the
+     objectionable token.  First, try to figure out what token the
+     parser's complaining about by looking at current_token. */
+  if (current_token != 0 && EOF_Reached == 0 && (msg = error_token_from_token (current_token)))
+    {
+      if (ansic_shouldquote (msg))
+	{
+	  p = ansic_quote (msg, 0, NULL);
+	  free (msg);
+	  msg = p;
+	}
+      parser_error (line_number, _("syntax error near unexpected token `%s'"), msg);
+      free (msg);
+
+      if (interactive == 0)
+	print_offending_line ();
+
+      last_command_exit_value = (executing_builtin && parse_and_execute_level) ? EX_BADSYNTAX : EX_BADUSAGE;
+      set_pipestatus_from_exit (last_command_exit_value);
+      return;
+    }
+
+  /* If looking at the current token doesn't prove fruitful, try to find the
+     offending token by analyzing the text of the input line near the current
+     input line index and report what we find. */
+  if (shell_input_line && *shell_input_line)
+    {
+      msg = error_token_from_text ();
+      if (msg)
+	{
+	  parser_error (line_number, _("syntax error near `%s'"), msg);
+	  free (msg);
+	}
+
+      /* If not interactive, print the line containing the error. */
+      if (interactive == 0)
+        print_offending_line ();
+    }
+  else
+    {
+      msg = EOF_Reached ? _("syntax error: unexpected end of file") : _("syntax error");
+      parser_error (line_number, "%s", msg);
+      /* When the shell is interactive, this file uses EOF_Reached
+	 only for error reporting.  Other mechanisms are used to
+	 decide whether or not to exit. */
+      if (interactive && EOF_Reached)
+	EOF_Reached = 0;
+    }
+
+  last_command_exit_value = (executing_builtin && parse_and_execute_level) ? EX_BADSYNTAX : EX_BADUSAGE;
+  set_pipestatus_from_exit (last_command_exit_value);
+}
+
+/* ??? Needed function. ??? We have to be able to discard the constructs
+   created during parsing.  In the case of error, we want to return
+   allocated objects to the memory pool.  In the case of no error, we want
+   to throw away the information about where the allocated objects live.
+   (dispose_command () will actually free the command.) */
+static void
+discard_parser_constructs (error_p)
+     int error_p;
+{
+}
+
+/************************************************
+ *						*
+ *		EOF HANDLING			*
+ *						*
+ ************************************************/
+
+/* Do that silly `type "bye" to exit' stuff.  You know, "ignoreeof". */
+
+/* A flag denoting whether or not ignoreeof is set. */
+int ignoreeof = 0;
+
+/* The number of times that we have encountered an EOF character without
+   another character intervening.  When this gets above the limit, the
+   shell terminates. */
+int eof_encountered = 0;
+
+/* The limit for eof_encountered. */
+int eof_encountered_limit = 10;
+
+/* If we have EOF as the only input unit, this user wants to leave
+   the shell.  If the shell is not interactive, then just leave.
+   Otherwise, if ignoreeof is set, and we haven't done this the
+   required number of times in a row, print a message. */
+static void
+handle_eof_input_unit ()
+{
+  if (interactive)
+    {
+      /* shell.c may use this to decide whether or not to write out the
+	 history, among other things.  We use it only for error reporting
+	 in this file. */
+      if (EOF_Reached)
+	EOF_Reached = 0;
+
+      /* If the user wants to "ignore" eof, then let her do so, kind of. */
+      if (ignoreeof)
+	{
+	  if (eof_encountered < eof_encountered_limit)
+	    {
+	      fprintf (stderr, _("Use \"%s\" to leave the shell.\n"),
+		       login_shell ? "logout" : "exit");
+	      eof_encountered++;
+	      /* Reset the parsing state. */
+	      last_read_token = current_token = '\n';
+	      /* Reset the prompt string to be $PS1. */
+	      prompt_string_pointer = (char **)NULL;
+	      prompt_again ();
+	      return;
+	    }
+	}
+
+      /* In this case EOF should exit the shell.  Do it now. */
+      reset_parser ();
+
+      last_shell_builtin = this_shell_builtin;
+      this_shell_builtin = exit_builtin;
+      exit_builtin ((WORD_LIST *)NULL);
+    }
+  else
+    {
+      /* We don't write history files, etc., for non-interactive shells. */
+      EOF_Reached = 1;
+    }
+}
+
+/************************************************
+ *						*
+ *	STRING PARSING FUNCTIONS		*
+ *						*
+ ************************************************/
+
+/* It's very important that these two functions treat the characters
+   between ( and ) identically. */
+
+static WORD_LIST parse_string_error;
+
+/* Take a string and run it through the shell parser, returning the
+   resultant word list.  Used by compound array assignment. */
+WORD_LIST *
+parse_string_to_word_list (s, flags, whom)
+     char *s;
+     int flags;
+     const char *whom;
+{
+  WORD_LIST *wl;
+  int tok, orig_current_token, orig_line_number, orig_input_terminator;
+  int orig_line_count;
+  int old_echo_input, old_expand_aliases, ea;
+#if defined (HISTORY)
+  int old_remember_on_history, old_history_expansion_inhibited;
+#endif
+
+#if defined (HISTORY)
+  old_remember_on_history = remember_on_history;
+#  if defined (BANG_HISTORY)
+  old_history_expansion_inhibited = history_expansion_inhibited;
+#  endif
+  bash_history_disable ();
+#endif
+
+  orig_line_number = line_number;
+  orig_line_count = current_command_line_count;
+  orig_input_terminator = shell_input_line_terminator;
+  old_echo_input = echo_input_at_read;
+  old_expand_aliases = expand_aliases;
+
+  push_stream (1);
+#if 0 /* TAG: bash-5.2 Alex fxmbsw7 Ratchev <fxmbsw7@gmail.com> 11/17/2020 */
+  if (ea = expanding_alias ())
+    parser_save_alias ();
+#endif
+  last_read_token = WORD;		/* WORD to allow reserved words here */
+  current_command_line_count = 0;
+  echo_input_at_read = expand_aliases = 0;
+
+  with_input_from_string (s, whom);
+  wl = (WORD_LIST *)NULL;
+
+  if (flags & 1)
+    parser_state |= PST_COMPASSIGN|PST_REPARSE;
+
+  while ((tok = read_token (READ)) != yacc_EOF)
+    {
+      if (tok == '\n' && *bash_input.location.string == '\0')
+	break;
+      if (tok == '\n')		/* Allow newlines in compound assignments */
+	continue;
+      if (tok != WORD && tok != ASSIGNMENT_WORD)
+	{
+	  line_number = orig_line_number + line_number - 1;
+	  orig_current_token = current_token;
+	  current_token = tok;
+	  yyerror (NULL);	/* does the right thing */
+	  current_token = orig_current_token;
+	  if (wl)
+	    dispose_words (wl);
+	  wl = &parse_string_error;
+	  break;
+	}
+      wl = make_word_list (yylval.word, wl);
+    }
+  
+  last_read_token = '\n';
+  pop_stream ();
+
+#if 0 /* TAG: bash-5.2 */
+  if (ea)
+    parser_restore_alias ();
+#endif
+
+#if defined (HISTORY)
+  remember_on_history = old_remember_on_history;
+#  if defined (BANG_HISTORY)
+  history_expansion_inhibited = old_history_expansion_inhibited;
+#  endif /* BANG_HISTORY */
+#endif /* HISTORY */
+
+  echo_input_at_read = old_echo_input;
+  expand_aliases = old_expand_aliases;
+
+  current_command_line_count = orig_line_count;
+  shell_input_line_terminator = orig_input_terminator;
+
+  if (flags & 1)
+    parser_state &= ~(PST_COMPASSIGN|PST_REPARSE);
+
+  if (wl == &parse_string_error)
+    {
+      set_exit_status (EXECUTION_FAILURE);
+      if (interactive_shell == 0 && posixly_correct)
+	jump_to_top_level (FORCE_EOF);
+      else
+	jump_to_top_level (DISCARD);
+    }
+
+  return (REVERSE_LIST (wl, WORD_LIST *));
+}
+
+static char *
+parse_compound_assignment (retlenp)
+     int *retlenp;
+{
+  WORD_LIST *wl, *rl;
+  int tok, orig_line_number, orig_token_size, orig_last_token, assignok;
+  char *saved_token, *ret;
+
+  saved_token = token;
+  orig_token_size = token_buffer_size;
+  orig_line_number = line_number;
+  orig_last_token = last_read_token;
+
+  last_read_token = WORD;	/* WORD to allow reserved words here */
+
+  token = (char *)NULL;
+  token_buffer_size = 0;
+
+  assignok = parser_state&PST_ASSIGNOK;		/* XXX */
+
+  wl = (WORD_LIST *)NULL;	/* ( */
+  parser_state |= PST_COMPASSIGN;
+
+  while ((tok = read_token (READ)) != ')')
+    {
+      if (tok == '\n')			/* Allow newlines in compound assignments */
+	{
+	  if (SHOULD_PROMPT ())
+	    prompt_again ();
+	  continue;
+	}
+      if (tok != WORD && tok != ASSIGNMENT_WORD)
+	{
+	  current_token = tok;	/* for error reporting */
+	  if (tok == yacc_EOF)	/* ( */
+	    parser_error (orig_line_number, _("unexpected EOF while looking for matching `)'"));
+	  else
+	    yyerror(NULL);	/* does the right thing */
+	  if (wl)
+	    dispose_words (wl);
+	  wl = &parse_string_error;
+	  break;
+	}
+      wl = make_word_list (yylval.word, wl);
+    }
+
+  FREE (token);
+  token = saved_token;
+  token_buffer_size = orig_token_size;
+
+  parser_state &= ~PST_COMPASSIGN;
+
+  if (wl == &parse_string_error)
+    {
+      set_exit_status (EXECUTION_FAILURE);
+      last_read_token = '\n';	/* XXX */
+      if (interactive_shell == 0 && posixly_correct)
+	jump_to_top_level (FORCE_EOF);
+      else
+	jump_to_top_level (DISCARD);
+    }
+
+  last_read_token = orig_last_token;		/* XXX - was WORD? */
+
+  if (wl)
+    {
+      rl = REVERSE_LIST (wl, WORD_LIST *);
+      ret = string_list (rl);
+      dispose_words (rl);
+    }
+  else
+    ret = (char *)NULL;
+
+  if (retlenp)
+    *retlenp = (ret && *ret) ? strlen (ret) : 0;
+
+  if (assignok)
+    parser_state |= PST_ASSIGNOK;
+
+  return ret;
+}
+
+/************************************************
+ *						*
+ *   SAVING AND RESTORING PARTIAL PARSE STATE   *
+ *						*
+ ************************************************/
+
+sh_parser_state_t *
+save_parser_state (ps)
+     sh_parser_state_t *ps;
+{
+  if (ps == 0)
+    ps = (sh_parser_state_t *)xmalloc (sizeof (sh_parser_state_t));
+  if (ps == 0)
+    return ((sh_parser_state_t *)NULL);
+
+  ps->parser_state = parser_state;
+  ps->token_state = save_token_state ();
+
+  ps->input_line_terminator = shell_input_line_terminator;
+  ps->eof_encountered = eof_encountered;
+
+  ps->prompt_string_pointer = prompt_string_pointer;
+
+  ps->current_command_line_count = current_command_line_count;
+
+#if defined (HISTORY)
+  ps->remember_on_history = remember_on_history;
+#  if defined (BANG_HISTORY)
+  ps->history_expansion_inhibited = history_expansion_inhibited;
+#  endif
+#endif
+
+  ps->last_command_exit_value = last_command_exit_value;
+#if defined (ARRAY_VARS)
+  ps->pipestatus = save_pipestatus_array ();
+#endif
+    
+  ps->last_shell_builtin = last_shell_builtin;
+  ps->this_shell_builtin = this_shell_builtin;
+
+  ps->expand_aliases = expand_aliases;
+  ps->echo_input_at_read = echo_input_at_read;
+  ps->need_here_doc = need_here_doc;
+  ps->here_doc_first_line = here_doc_first_line;
+
+  if (need_here_doc == 0)
+    ps->redir_stack[0] = 0;
+  else
+    memcpy (ps->redir_stack, redir_stack, sizeof (redir_stack[0]) * HEREDOC_MAX);
+
+  ps->token = token;
+  ps->token_buffer_size = token_buffer_size;
+  /* Force reallocation on next call to read_token_word */
+  token = 0;
+  token_buffer_size = 0;
+
+  return (ps);
+}
+
+void
+restore_parser_state (ps)
+     sh_parser_state_t *ps;
+{
+  int i;
+
+  if (ps == 0)
+    return;
+
+  parser_state = ps->parser_state;
+  if (ps->token_state)
+    {
+      restore_token_state (ps->token_state);
+      free (ps->token_state);
+    }
+
+  shell_input_line_terminator = ps->input_line_terminator;
+  eof_encountered = ps->eof_encountered;
+
+  prompt_string_pointer = ps->prompt_string_pointer;
+
+  current_command_line_count = ps->current_command_line_count;
+
+#if defined (HISTORY)
+  remember_on_history = ps->remember_on_history;
+#  if defined (BANG_HISTORY)
+  history_expansion_inhibited = ps->history_expansion_inhibited;
+#  endif
+#endif
+
+  last_command_exit_value = ps->last_command_exit_value;
+#if defined (ARRAY_VARS)
+  restore_pipestatus_array (ps->pipestatus);
+#endif
+
+  last_shell_builtin = ps->last_shell_builtin;
+  this_shell_builtin = ps->this_shell_builtin;
+
+  expand_aliases = ps->expand_aliases;
+  echo_input_at_read = ps->echo_input_at_read;
+  need_here_doc = ps->need_here_doc;
+  here_doc_first_line = ps->here_doc_first_line;
+
+#if 0
+  for (i = 0; i < HEREDOC_MAX; i++)
+    redir_stack[i] = ps->redir_stack[i];
+#else
+  if (need_here_doc == 0)
+    redir_stack[0] = 0;
+  else
+    memcpy (redir_stack, ps->redir_stack, sizeof (redir_stack[0]) * HEREDOC_MAX);
+#endif
+
+  FREE (token);
+  token = ps->token;
+  token_buffer_size = ps->token_buffer_size;
+}
+
+sh_input_line_state_t *
+save_input_line_state (ls)
+     sh_input_line_state_t *ls;
+{
+  if (ls == 0)
+    ls = (sh_input_line_state_t *)xmalloc (sizeof (sh_input_line_state_t));
+  if (ls == 0)
+    return ((sh_input_line_state_t *)NULL);
+
+  ls->input_line = shell_input_line;
+  ls->input_line_size = shell_input_line_size;
+  ls->input_line_len = shell_input_line_len;
+  ls->input_line_index = shell_input_line_index;
+
+#if defined (HANDLE_MULTIBYTE)
+  ls->input_property = shell_input_line_property;
+  ls->input_propsize = shell_input_line_propsize;
+#endif
+
+  /* force reallocation */
+  shell_input_line = 0;
+  shell_input_line_size = shell_input_line_len = shell_input_line_index = 0;
+
+#if defined (HANDLE_MULTIBYTE)
+  shell_input_line_property = 0;
+  shell_input_line_propsize = 0;
+#endif
+
+  return ls;
+}
+
+void
+restore_input_line_state (ls)
+     sh_input_line_state_t *ls;
+{
+  FREE (shell_input_line);
+  shell_input_line = ls->input_line;
+  shell_input_line_size = ls->input_line_size;
+  shell_input_line_len = ls->input_line_len;
+  shell_input_line_index = ls->input_line_index;
+
+#if defined (HANDLE_MULTIBYTE)
+  FREE (shell_input_line_property);
+  shell_input_line_property = ls->input_property;
+  shell_input_line_propsize = ls->input_propsize;
+#endif
+
+#if 0
+  set_line_mbstate ();
+#endif
+}
+
+/************************************************
+ *						*
+ *	MULTIBYTE CHARACTER HANDLING		*
+ *						*
+ ************************************************/
+
+#if defined (HANDLE_MULTIBYTE)
+
+/* We don't let the property buffer get larger than this unless the line is */
+#define MAX_PROPSIZE 32768
+
+static void
+set_line_mbstate ()
+{
+  int c;
+  size_t i, previ, len;
+  mbstate_t mbs, prevs;
+  size_t mbclen;
+  int ilen;
+
+  if (shell_input_line == NULL)
+    return;
+  len = STRLEN (shell_input_line);	/* XXX - shell_input_line_len ? */
+  if (len == 0)
+    return;
+  if (shell_input_line_propsize >= MAX_PROPSIZE && len < MAX_PROPSIZE>>1)
+    {
+      free (shell_input_line_property);
+      shell_input_line_property = 0;
+      shell_input_line_propsize = 0;
+    }
+  if (len+1 > shell_input_line_propsize)
+    {
+      shell_input_line_propsize = len + 1;
+      shell_input_line_property = (char *)xrealloc (shell_input_line_property, shell_input_line_propsize);
+    }
+
+  if (locale_mb_cur_max == 1)
+    {
+      memset (shell_input_line_property, 1, len);
+      return;
+    }
+
+  /* XXX - use whether or not we are in a UTF-8 locale to avoid calls to
+     mbrlen */
+  if (locale_utf8locale == 0)
+    memset (&prevs, '\0', sizeof (mbstate_t));
+
+  for (i = previ = 0; i < len; i++)
+    {
+      if (locale_utf8locale == 0)
+	mbs = prevs;
+
+      c = shell_input_line[i];
+      if (c == EOF)
+	{
+	  size_t j;
+	  for (j = i; j < len; j++)
+	    shell_input_line_property[j] = 1;
+	  break;
+	}
+
+      if (locale_utf8locale)
+	{
+	  if ((unsigned char)shell_input_line[previ] < 128)	/* i != previ */
+	    mbclen = 1;
+	  else
+	    {
+	      ilen = utf8_mblen (shell_input_line + previ, i - previ + 1);
+	      mbclen = (ilen == -1) ? (size_t)-1
+				    : ((ilen == -2) ? (size_t)-2 : (size_t)ilen);
+	    }
+	}
+      else
+	mbclen = mbrlen (shell_input_line + previ, i - previ + 1, &mbs);
+
+      if (mbclen == 1 || mbclen == (size_t)-1)
+	{
+	  mbclen = 1;
+	  previ = i + 1;
+	}
+      else if (mbclen == (size_t)-2)
+        mbclen = 0;
+      else if (mbclen > 1)
+	{
+	  mbclen = 0;
+	  previ = i + 1;
+	  if (locale_utf8locale == 0)
+	    prevs = mbs;
+	}
+      else
+	{
+	  size_t j;
+	  for (j = i; j < len; j++)
+	    shell_input_line_property[j] = 1;
+	  break;
+	}
+
+      shell_input_line_property[i] = mbclen;
+    }
+}
+#endif /* HANDLE_MULTIBYTE */
diff --git a/parser-built b/parser-built
new file mode 100644
index 0000000..41bdea0
--- /dev/null
+++ b/parser-built
@@ -0,0 +1,186 @@
+/* A Bison parser, made by GNU Bison 3.6.4.  */
+
+/* Bison interface for Yacc-like parsers in C
+
+   Copyright (C) 1984, 1989-1990, 2000-2015, 2018-2020 Free Software Foundation,
+   Inc.
+
+   This program is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+/* As a special exception, you may create a larger work that contains
+   part or all of the Bison parser skeleton and distribute that work
+   under terms of your choice, so long as that work isn't itself a
+   parser generator using the skeleton or a modified version thereof
+   as a parser skeleton.  Alternatively, if you modify or redistribute
+   the parser skeleton itself, you may (at your option) remove this
+   special exception, which will cause the skeleton and the resulting
+   Bison output files to be licensed under the GNU General Public
+   License without this special exception.
+
+   This special exception was added by the Free Software Foundation in
+   version 2.2 of Bison.  */
+
+/* DO NOT RELY ON FEATURES THAT ARE NOT DOCUMENTED in the manual,
+   especially those whose name start with YY_ or yy_.  They are
+   private implementation details that can be changed or removed.  */
+
+#ifndef YY_YY_Y_TAB_H_INCLUDED
+# define YY_YY_Y_TAB_H_INCLUDED
+/* Debug traces.  */
+#ifndef YYDEBUG
+# define YYDEBUG 0
+#endif
+#if YYDEBUG
+extern int yydebug;
+#endif
+
+/* Token kinds.  */
+#ifndef YYTOKENTYPE
+# define YYTOKENTYPE
+  enum yytokentype
+  {
+    YYEMPTY = -2,
+    YYEOF = 0,                     /* "end of file"  */
+    YYerror = 256,                 /* error  */
+    YYUNDEF = 257,                 /* "invalid token"  */
+    IF = 258,                      /* IF  */
+    THEN = 259,                    /* THEN  */
+    ELSE = 260,                    /* ELSE  */
+    ELIF = 261,                    /* ELIF  */
+    FI = 262,                      /* FI  */
+    CASE = 263,                    /* CASE  */
+    ESAC = 264,                    /* ESAC  */
+    FOR = 265,                     /* FOR  */
+    SELECT = 266,                  /* SELECT  */
+    WHILE = 267,                   /* WHILE  */
+    UNTIL = 268,                   /* UNTIL  */
+    DO = 269,                      /* DO  */
+    DONE = 270,                    /* DONE  */
+    FUNCTION = 271,                /* FUNCTION  */
+    COPROC = 272,                  /* COPROC  */
+    COND_START = 273,              /* COND_START  */
+    COND_END = 274,                /* COND_END  */
+    COND_ERROR = 275,              /* COND_ERROR  */
+    IN = 276,                      /* IN  */
+    BANG = 277,                    /* BANG  */
+    TIME = 278,                    /* TIME  */
+    TIMEOPT = 279,                 /* TIMEOPT  */
+    TIMEIGN = 280,                 /* TIMEIGN  */
+    WORD = 281,                    /* WORD  */
+    ASSIGNMENT_WORD = 282,         /* ASSIGNMENT_WORD  */
+    REDIR_WORD = 283,              /* REDIR_WORD  */
+    NUMBER = 284,                  /* NUMBER  */
+    ARITH_CMD = 285,               /* ARITH_CMD  */
+    ARITH_FOR_EXPRS = 286,         /* ARITH_FOR_EXPRS  */
+    COND_CMD = 287,                /* COND_CMD  */
+    AND_AND = 288,                 /* AND_AND  */
+    OR_OR = 289,                   /* OR_OR  */
+    GREATER_GREATER = 290,         /* GREATER_GREATER  */
+    LESS_LESS = 291,               /* LESS_LESS  */
+    LESS_AND = 292,                /* LESS_AND  */
+    LESS_LESS_LESS = 293,          /* LESS_LESS_LESS  */
+    GREATER_AND = 294,             /* GREATER_AND  */
+    SEMI_SEMI = 295,               /* SEMI_SEMI  */
+    SEMI_AND = 296,                /* SEMI_AND  */
+    SEMI_SEMI_AND = 297,           /* SEMI_SEMI_AND  */
+    LESS_LESS_MINUS = 298,         /* LESS_LESS_MINUS  */
+    AND_GREATER = 299,             /* AND_GREATER  */
+    AND_GREATER_GREATER = 300,     /* AND_GREATER_GREATER  */
+    LESS_GREATER = 301,            /* LESS_GREATER  */
+    GREATER_BAR = 302,             /* GREATER_BAR  */
+    BAR_AND = 303,                 /* BAR_AND  */
+    yacc_EOF = 304                 /* yacc_EOF  */
+  };
+  typedef enum yytokentype yytoken_kind_t;
+#endif
+/* Token kinds.  */
+#define YYEOF 0
+#define YYerror 256
+#define YYUNDEF 257
+#define IF 258
+#define THEN 259
+#define ELSE 260
+#define ELIF 261
+#define FI 262
+#define CASE 263
+#define ESAC 264
+#define FOR 265
+#define SELECT 266
+#define WHILE 267
+#define UNTIL 268
+#define DO 269
+#define DONE 270
+#define FUNCTION 271
+#define COPROC 272
+#define COND_START 273
+#define COND_END 274
+#define COND_ERROR 275
+#define IN 276
+#define BANG 277
+#define TIME 278
+#define TIMEOPT 279
+#define TIMEIGN 280
+#define WORD 281
+#define ASSIGNMENT_WORD 282
+#define REDIR_WORD 283
+#define NUMBER 284
+#define ARITH_CMD 285
+#define ARITH_FOR_EXPRS 286
+#define COND_CMD 287
+#define AND_AND 288
+#define OR_OR 289
+#define GREATER_GREATER 290
+#define LESS_LESS 291
+#define LESS_AND 292
+#define LESS_LESS_LESS 293
+#define GREATER_AND 294
+#define SEMI_SEMI 295
+#define SEMI_AND 296
+#define SEMI_SEMI_AND 297
+#define LESS_LESS_MINUS 298
+#define AND_GREATER 299
+#define AND_GREATER_GREATER 300
+#define LESS_GREATER 301
+#define GREATER_BAR 302
+#define BAR_AND 303
+#define yacc_EOF 304
+
+/* Value type.  */
+#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
+union YYSTYPE
+{
+#line 328 "/Users/chet/src/bash/src/parse.y"
+
+  WORD_DESC *word;		/* the word that we read. */
+  int number;			/* the number that we read. */
+  WORD_LIST *word_list;
+  COMMAND *command;
+  REDIRECT *redirect;
+  ELEMENT element;
+  PATTERN_LIST *pattern;
+
+#line 174 "y.tab.h"
+
+};
+typedef union YYSTYPE YYSTYPE;
+# define YYSTYPE_IS_TRIVIAL 1
+# define YYSTYPE_IS_DECLARED 1
+#endif
+
+
+extern YYSTYPE yylval;
+
+int yyparse (void);
+
+#endif /* !YY_YY_Y_TAB_H_INCLUDED  */
diff --git a/parser.h b/parser.h
new file mode 100644
index 0000000..59bddac
--- /dev/null
+++ b/parser.h
@@ -0,0 +1,100 @@
+/* parser.h -- Everything you wanted to know about the parser, but were
+   afraid to ask. */
+
+/* Copyright (C) 1995-2019 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_PARSER_H_)
+#  define _PARSER_H_
+
+#  include "command.h"
+#  include "input.h"
+
+/* Possible states for the parser that require it to do special things. */
+#define PST_CASEPAT	0x000001	/* in a case pattern list */
+#define PST_ALEXPNEXT	0x000002	/* expand next word for aliases */
+#define PST_ALLOWOPNBRC	0x000004	/* allow open brace for function def */
+#define PST_NEEDCLOSBRC	0x000008	/* need close brace */
+#define PST_DBLPAREN	0x000010	/* double-paren parsing */
+#define PST_SUBSHELL	0x000020	/* ( ... ) subshell */
+#define PST_CMDSUBST	0x000040	/* $( ... ) command substitution */
+#define PST_CASESTMT	0x000080	/* parsing a case statement */
+#define PST_CONDCMD	0x000100	/* parsing a [[...]] command */
+#define PST_CONDEXPR	0x000200	/* parsing the guts of [[...]] */
+#define PST_ARITHFOR	0x000400	/* parsing an arithmetic for command - unused */
+#define PST_ALEXPAND	0x000800	/* OK to expand aliases - unused */
+#define PST_EXTPAT	0x001000	/* parsing an extended shell pattern */
+#define PST_COMPASSIGN	0x002000	/* parsing x=(...) compound assignment */
+#define PST_ASSIGNOK	0x004000	/* assignment statement ok in this context */
+#define PST_EOFTOKEN	0x008000	/* yylex checks against shell_eof_token */
+#define PST_REGEXP	0x010000	/* parsing an ERE/BRE as a single word */
+#define PST_HEREDOC	0x020000	/* reading body of here-document */
+#define PST_REPARSE	0x040000	/* re-parsing in parse_string_to_word_list */
+#define PST_REDIRLIST	0x080000	/* parsing a list of redirections preceding a simple command name */
+#define PST_COMMENT	0x100000	/* parsing a shell comment; used by aliases */
+#define PST_ENDALIAS	0x200000	/* just finished expanding and consuming an alias */
+
+/* Definition of the delimiter stack.  Needed by parse.y and bashhist.c. */
+struct dstack {
+/* DELIMITERS is a stack of the nested delimiters that we have
+   encountered so far. */
+  char *delimiters;
+
+/* Offset into the stack of delimiters. */
+  int delimiter_depth;
+
+/* How many slots are allocated to DELIMITERS. */
+  int delimiter_space;
+};
+
+/* States we can be in while scanning a ${...} expansion.  Shared between
+   parse.y and subst.c */
+#define DOLBRACE_PARAM	0x01
+#define DOLBRACE_OP	0x02
+#define DOLBRACE_WORD	0x04
+
+#define DOLBRACE_QUOTE	0x40	/* single quote is special in double quotes */
+#define DOLBRACE_QUOTE2	0x80	/* single quote is semi-special in double quotes */
+
+/* variable declarations from parse.y */
+extern struct dstack dstack;
+
+extern char *primary_prompt;
+extern char *secondary_prompt;
+
+extern char *current_prompt_string;
+
+extern char *ps1_prompt;
+extern char *ps2_prompt;
+extern char *ps0_prompt;
+
+extern int expand_aliases;
+extern int current_command_line_count;
+extern int saved_command_line_count;
+extern int shell_eof_token;
+extern int current_token;
+extern int parser_state;
+extern int need_here_doc;
+
+extern int ignoreeof;
+extern int eof_encountered;
+extern int eof_encountered_limit;
+
+extern int line_number, line_number_base;
+
+#endif /* _PARSER_H_ */
diff --git a/patchlevel.h b/patchlevel.h
new file mode 100644
index 0000000..1cd7c96
--- /dev/null
+++ b/patchlevel.h
@@ -0,0 +1,30 @@
+/* patchlevel.h -- current bash patch level */
+
+/* Copyright (C) 2001-2016 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_PATCHLEVEL_H_)
+#define _PATCHLEVEL_H_
+
+/* It's important that there be no other strings in this file that match the
+   regexp `^#define[ 	]*PATCHLEVEL', since that's what support/mkversion.sh
+   looks for to find the patch level (for the sccs version string). */
+
+#define PATCHLEVEL 0
+
+#endif /* _PATCHLEVEL_H_ */
diff --git a/pathexp.c b/pathexp.c
new file mode 100644
index 0000000..6e7ef28
--- /dev/null
+++ b/pathexp.c
@@ -0,0 +1,690 @@
+/* pathexp.c -- The shell interface to the globbing library. */
+
+/* Copyright (C) 1995-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include "bashtypes.h"
+#include <stdio.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "bashansi.h"
+
+#include "shell.h"
+#include "pathexp.h"
+#include "flags.h"
+
+#include "shmbutil.h"
+#include "bashintl.h"
+
+#include <glob/strmatch.h>
+
+static int glob_name_is_acceptable PARAMS((const char *));
+static void ignore_globbed_names PARAMS((char **, sh_ignore_func_t *));
+static char *split_ignorespec PARAMS((char *, int *));
+	       
+#if defined (USE_POSIX_GLOB_LIBRARY)
+#  include <glob.h>
+typedef int posix_glob_errfunc_t PARAMS((const char *, int));
+#else
+#  include <glob/glob.h>
+#endif
+
+/* Control whether * matches .files in globbing. */
+int glob_dot_filenames;
+
+/* Control whether the extended globbing features are enabled. */
+int extended_glob = EXTGLOB_DEFAULT;
+
+/* Control enabling special handling of `**' */
+int glob_star = 0;
+
+/* Return nonzero if STRING has any unquoted special globbing chars in it.
+   This is supposed to be called when pathname expansion is performed, so
+   it implements the rules in Posix 2.13.3, specifically that an unquoted
+   slash cannot appear in a bracket expression. */
+int
+unquoted_glob_pattern_p (string)
+     register char *string;
+{
+  register int c;
+  char *send;
+  int open, bsquote;
+
+  DECLARE_MBSTATE;
+
+  open = bsquote = 0;
+  send = string + strlen (string);
+
+  while (c = *string++)
+    {
+      switch (c)
+	{
+	case '?':
+	case '*':
+	  return (1);
+
+	case '[':
+	  open++;
+	  continue;
+
+	case ']':
+	  if (open)		/* XXX - if --open == 0? */
+	    return (1);
+	  continue;
+
+	case '/':
+	  if (open)
+	    open = 0;
+
+	case '+':
+	case '@':
+	case '!':
+	  if (*string == '(')	/*)*/
+	    return (1);
+	  continue;
+
+	/* A pattern can't end with a backslash, but a backslash in the pattern
+	   can be special to the matching engine, so we note it in case we
+	   need it later. */
+	case '\\':
+	  if (*string != '\0' && *string != '/')
+	    {
+	      bsquote = 1;
+	      string++;
+	      continue;
+	    }
+	  else if (open && *string == '/')
+	    {
+	      string++;		/* quoted slashes in bracket expressions are ok */
+	      continue;
+	    }
+	  else if (*string == 0)
+	    return (0);
+	 	  
+	case CTLESC:
+	  if (*string++ == '\0')
+	    return (0);
+	}
+
+      /* Advance one fewer byte than an entire multibyte character to
+	 account for the auto-increment in the loop above. */
+#ifdef HANDLE_MULTIBYTE
+      string--;
+      ADVANCE_CHAR_P (string, send - string);
+      string++;
+#else
+      ADVANCE_CHAR_P (string, send - string);
+#endif
+    }
+
+#if 0
+  return (bsquote ? 2 : 0);
+#else
+  return (0);
+#endif
+}
+
+/* Return 1 if C is a character that is `special' in a POSIX ERE and needs to
+   be quoted to match itself. */
+static inline int
+ere_char (c)
+     int c;
+{
+  switch (c)
+    {
+    case '.':
+    case '[':
+    case '\\':
+    case '(':
+    case ')':
+    case '*':
+    case '+':
+    case '?':
+    case '{':
+    case '|':
+    case '^':
+    case '$':
+      return 1;
+    default: 
+      return 0;
+    }
+  return (0);
+}
+
+int
+glob_char_p (s)
+     const char *s;
+{
+  switch (*s)
+    {
+    case '*':
+    case '[':
+    case ']':
+    case '?':
+    case '\\':
+      return 1;
+    case '+':
+    case '@':
+    case '!':
+      if (s[1] == '(')	/*(*/
+	return 1;
+      break;
+    }
+  return 0;
+}
+
+/* PATHNAME can contain characters prefixed by CTLESC; this indicates
+   that the character is to be quoted.  We quote it here in the style
+   that the glob library recognizes.  If flags includes QGLOB_CVTNULL,
+   we change quoted null strings (pathname[0] == CTLNUL) into empty
+   strings (pathname[0] == 0).  If this is called after quote removal
+   is performed, (flags & QGLOB_CVTNULL) should be 0; if called when quote
+   removal has not been done (for example, before attempting to match a
+   pattern while executing a case statement), flags should include
+   QGLOB_CVTNULL.  If flags includes QGLOB_CTLESC, we need to remove CTLESC
+   quoting CTLESC or CTLNUL (as if dequote_string were called).  If flags
+   includes QGLOB_FILENAME, appropriate quoting to match a filename should be
+   performed.  QGLOB_REGEXP means we're quoting for a Posix ERE (for
+   [[ string =~ pat ]]) and that requires some special handling. */
+char *
+quote_string_for_globbing (pathname, qflags)
+     const char *pathname;
+     int qflags;
+{
+  char *temp;
+  register int i, j;
+  int cclass, collsym, equiv, c, last_was_backslash;
+  int savei, savej;
+
+  temp = (char *)xmalloc (2 * strlen (pathname) + 1);
+
+  if ((qflags & QGLOB_CVTNULL) && QUOTED_NULL (pathname))
+    {
+      temp[0] = '\0';
+      return temp;
+    }
+
+  cclass = collsym = equiv = last_was_backslash = 0;
+  for (i = j = 0; pathname[i]; i++)
+    {
+      /* Fix for CTLESC at the end of the string? */
+      if (pathname[i] == CTLESC && pathname[i+1] == '\0')
+	{
+	  temp[j++] = pathname[i++];
+	  break;
+	}
+      /* If we are parsing regexp, turn CTLESC CTLESC into CTLESC. It's not an
+	 ERE special character, so we should just be able to pass it through. */
+      else if ((qflags & (QGLOB_REGEXP|QGLOB_CTLESC)) && pathname[i] == CTLESC && (pathname[i+1] == CTLESC || pathname[i+1] == CTLNUL))
+	{
+	  i++;
+	  temp[j++] = pathname[i];
+	  continue;
+	}
+      else if (pathname[i] == CTLESC)
+	{
+convert_to_backslash:
+	  if ((qflags & QGLOB_FILENAME) && pathname[i+1] == '/')
+	    continue;
+	  /* What to do if preceding char is backslash? */
+	  if (pathname[i+1] != CTLESC && (qflags & QGLOB_REGEXP) && ere_char (pathname[i+1]) == 0)
+	    continue;
+	  temp[j++] = '\\';
+	  i++;
+	  if (pathname[i] == '\0')
+	    break;
+	}
+      else if ((qflags & QGLOB_REGEXP) && (i == 0 || pathname[i-1] != CTLESC) && pathname[i] == '[')	/*]*/
+	{
+	  temp[j++] = pathname[i++];	/* open bracket */
+	  savej = j;
+	  savei = i;
+	  c = pathname[i++];	/* c == char after open bracket */
+	  if (c == '^')		/* ignore pattern negation */
+	    {
+	      temp[j++] = c;
+	      c = pathname[i++];
+	    }
+	  if (c == ']')		/* ignore right bracket if first char */
+	    {
+	      temp[j++] = c;
+	      c = pathname[i++];
+	    }
+	  do
+	    {
+	      if (c == 0)
+		goto endpat;
+	      else if (c == CTLESC)
+		{
+		  /* skip c, check for EOS, let assignment at end of loop */
+		  /* pathname[i] == backslash-escaped character */
+		  if (pathname[i] == 0)
+		    goto endpat;
+		  temp[j++] = pathname[i++];
+		}
+	      else if (c == '[' && pathname[i] == ':')
+		{
+		  temp[j++] = c;
+		  temp[j++] = pathname[i++];
+		  cclass = 1;
+		}
+	      else if (cclass && c == ':' && pathname[i] == ']')
+		{
+		  temp[j++] = c;
+		  temp[j++] = pathname[i++];
+		  cclass = 0;
+		}
+	      else if (c == '[' && pathname[i] == '=')
+		{
+		  temp[j++] = c;
+		  temp[j++] = pathname[i++];
+		  if (pathname[i] == ']')
+		    temp[j++] = pathname[i++];		/* right brack can be in equiv */
+		  equiv = 1;
+		}
+	      else if (equiv && c == '=' && pathname[i] == ']')
+		{
+		  temp[j++] = c;
+		  temp[j++] = pathname[i++];
+		  equiv = 0;
+		}
+	      else if (c == '[' && pathname[i] == '.')
+		{
+		  temp[j++] = c;
+		  temp[j++] = pathname[i++];
+		  if (pathname[i] == ']')
+		    temp[j++] = pathname[i++];		/* right brack can be in collsym */
+		  collsym = 1;
+		}
+	      else if (collsym && c == '.' && pathname[i] == ']')
+		{
+		  temp[j++] = c;
+		  temp[j++] = pathname[i++];
+		  collsym = 0;
+		}
+	      else
+		temp[j++] = c;
+	    }
+	  while (((c = pathname[i++]) != ']') && c != 0);
+
+	  /* If we don't find the closing bracket before we hit the end of
+	     the string, rescan string without treating it as a bracket
+	     expression (has implications for backslash and special ERE
+	     chars) */
+	  if (c == 0)
+	    {
+	      i = savei - 1;	/* -1 for autoincrement above */
+	      j = savej;
+	      continue;
+	    }
+
+	  temp[j++] = c;	/* closing right bracket */
+	  i--;			/* increment will happen above in loop */
+	  continue;		/* skip double assignment below */
+	}
+      else if (pathname[i] == '\\' && (qflags & QGLOB_REGEXP) == 0)
+	{
+	  /* XXX - if not quoting regexp, use backslash as quote char. Should
+	     We just pass it through without treating it as special? That is
+	     what ksh93 seems to do. */
+
+	  /* If we want to pass through backslash unaltered, comment out these
+	     lines. */
+	  temp[j++] = '\\';
+
+	  i++;
+	  if (pathname[i] == '\0')
+	    break;
+	  /* If we are turning CTLESC CTLESC into CTLESC, we need to do that
+	     even when the first CTLESC is preceded by a backslash. */
+	  if ((qflags & QGLOB_CTLESC) && pathname[i] == CTLESC && (pathname[i+1] == CTLESC || pathname[i+1] == CTLNUL))
+	    i++;	/* skip over the CTLESC */
+	  else if ((qflags & QGLOB_CTLESC) && pathname[i] == CTLESC)
+	    /* A little more general: if there is an unquoted backslash in the
+	       pattern and we are handling quoted characters in the pattern,
+	       convert the CTLESC to backslash and add the next character on
+	       the theory that the backslash will quote the next character
+	       but it would be inconsistent not to replace the CTLESC with
+	       another backslash here. We can't tell at this point whether the
+	       CTLESC comes from a backslash or other form of quoting in the
+	       original pattern. */
+	    goto convert_to_backslash;
+	}
+      else if (pathname[i] == '\\' && (qflags & QGLOB_REGEXP))
+        last_was_backslash = 1;
+      temp[j++] = pathname[i];
+    }
+endpat:
+  temp[j] = '\0';
+
+  return (temp);
+}
+
+char *
+quote_globbing_chars (string)
+     const char *string;
+{
+  size_t slen;
+  char *temp, *t;
+  const char *s, *send;
+  DECLARE_MBSTATE;
+
+  slen = strlen (string);
+  send = string + slen;
+
+  temp = (char *)xmalloc (slen * 2 + 1);
+  for (t = temp, s = string; *s; )
+    {
+      if (glob_char_p (s))
+	*t++ = '\\';
+
+      /* Copy a single (possibly multibyte) character from s to t,
+	 incrementing both. */
+      COPY_CHAR_P (t, s, send);
+    }
+  *t = '\0';
+  return temp;
+}
+
+/* Call the glob library to do globbing on PATHNAME. */
+char **
+shell_glob_filename (pathname, qflags)
+     const char *pathname;
+     int qflags;
+{
+#if defined (USE_POSIX_GLOB_LIBRARY)
+  register int i;
+  char *temp, **results;
+  glob_t filenames;
+  int glob_flags;
+
+  temp = quote_string_for_globbing (pathname, QGLOB_FILENAME|qflags);
+
+  filenames.gl_offs = 0;
+
+#  if defined (GLOB_PERIOD)
+  glob_flags = glob_dot_filenames ? GLOB_PERIOD : 0;
+#  else
+  glob_flags = 0;
+#  endif /* !GLOB_PERIOD */
+
+  glob_flags |= (GLOB_ERR | GLOB_DOOFFS);
+
+  i = glob (temp, glob_flags, (posix_glob_errfunc_t *)NULL, &filenames);
+
+  free (temp);
+
+  if (i == GLOB_NOSPACE || i == GLOB_ABORTED)
+    return ((char **)NULL);
+  else if (i == GLOB_NOMATCH)
+    filenames.gl_pathv = (char **)NULL;
+  else if (i != 0)		/* other error codes not in POSIX.2 */
+    filenames.gl_pathv = (char **)NULL;
+
+  results = filenames.gl_pathv;
+
+  if (results && ((GLOB_FAILED (results)) == 0))
+    {
+      if (should_ignore_glob_matches ())
+	ignore_glob_matches (results);
+      if (results && results[0])
+	strvec_sort (results, 1);		/* posix sort */
+      else
+	{
+	  FREE (results);
+	  results = (char **)NULL;
+	}
+    }
+
+  return (results);
+
+#else /* !USE_POSIX_GLOB_LIBRARY */
+
+  char *temp, **results;
+  int gflags, quoted_pattern;
+
+  noglob_dot_filenames = glob_dot_filenames == 0;
+
+  temp = quote_string_for_globbing (pathname, QGLOB_FILENAME|qflags);
+  gflags = glob_star ? GX_GLOBSTAR : 0;
+  results = glob_filename (temp, gflags);
+  free (temp);
+
+  if (results && ((GLOB_FAILED (results)) == 0))
+    {
+      if (should_ignore_glob_matches ())
+	ignore_glob_matches (results);
+      if (results && results[0])
+	strvec_sort (results, 1);		/* posix sort */
+      else
+	{
+	  FREE (results);
+	  results = (char **)&glob_error_return;
+	}
+    }
+
+  return (results);
+#endif /* !USE_POSIX_GLOB_LIBRARY */
+}
+
+/* Stuff for GLOBIGNORE. */
+
+static struct ignorevar globignore =
+{
+  "GLOBIGNORE",
+  (struct ign *)0,
+  0,
+  (char *)0,
+  (sh_iv_item_func_t *)0,
+};
+
+/* Set up to ignore some glob matches because the value of GLOBIGNORE
+   has changed.  If GLOBIGNORE is being unset, we also need to disable
+   the globbing of filenames beginning with a `.'. */
+void
+setup_glob_ignore (name)
+     char *name;
+{
+  char *v;
+
+  v = get_string_value (name);
+  setup_ignore_patterns (&globignore);
+
+  if (globignore.num_ignores)
+    glob_dot_filenames = 1;
+  else if (v == 0)
+    glob_dot_filenames = 0;
+}
+
+int
+should_ignore_glob_matches ()
+{
+  return globignore.num_ignores;
+}
+
+/* Return 0 if NAME matches a pattern in the globignore.ignores list. */
+static int
+glob_name_is_acceptable (name)
+     const char *name;
+{
+  struct ign *p;
+  char *n;
+  int flags;
+
+  /* . and .. are never matched. We extend this to the terminal component of a
+     pathname. */
+  n = strrchr (name, '/');
+  if (n == 0 || n[1] == 0)
+    n = (char *)name;
+  else
+    n++;
+
+  if (n[0] == '.' && (n[1] == '\0' || (n[1] == '.' && n[2] == '\0')))
+    return (0);
+
+  flags = FNM_PATHNAME | FNMATCH_EXTFLAG | FNMATCH_NOCASEGLOB;
+  for (p = globignore.ignores; p->val; p++)
+    {
+      if (strmatch (p->val, (char *)name, flags) != FNM_NOMATCH)
+	return (0);
+    }
+  return (1);
+}
+
+/* Internal function to test whether filenames in NAMES should be
+   ignored.  NAME_FUNC is a pointer to a function to call with each
+   name.  It returns non-zero if the name is acceptable to the particular
+   ignore function which called _ignore_names; zero if the name should
+   be removed from NAMES. */
+
+static void
+ignore_globbed_names (names, name_func)
+     char **names;
+     sh_ignore_func_t *name_func;
+{
+  char **newnames;
+  int n, i;
+
+  for (i = 0; names[i]; i++)
+    ;
+  newnames = strvec_create (i + 1);
+
+  for (n = i = 0; names[i]; i++)
+    {
+      if ((*name_func) (names[i]))
+	newnames[n++] = names[i];
+      else
+	free (names[i]);
+    }
+
+  newnames[n] = (char *)NULL;
+
+  if (n == 0)
+    {
+      names[0] = (char *)NULL;
+      free (newnames);
+      return;
+    }
+
+  /* Copy the acceptable names from NEWNAMES back to NAMES and set the
+     new array end. */
+  for (n = 0; newnames[n]; n++)
+    names[n] = newnames[n];
+  names[n] = (char *)NULL;
+  free (newnames);
+}
+
+void
+ignore_glob_matches (names)
+     char **names;
+{
+  if (globignore.num_ignores == 0)
+    return;
+
+  ignore_globbed_names (names, glob_name_is_acceptable);
+}
+
+static char *
+split_ignorespec (s, ip)
+     char *s;
+     int *ip;
+{
+  char *t;
+  int n, i;
+
+  if (s == 0)
+    return 0;
+
+  i = *ip;
+  if (s[i] == 0)
+    return 0;
+
+  n = skip_to_delim (s, i, ":", SD_NOJMP|SD_EXTGLOB|SD_GLOB);
+  t = substring (s, i, n);
+
+  if (s[n] == ':')
+    n++;  
+  *ip = n;  
+  return t;
+}
+  
+void
+setup_ignore_patterns (ivp)
+     struct ignorevar *ivp;
+{
+  int numitems, maxitems, ptr;
+  char *colon_bit, *this_ignoreval;
+  struct ign *p;
+
+  this_ignoreval = get_string_value (ivp->varname);
+
+  /* If nothing has changed then just exit now. */
+  if ((this_ignoreval && ivp->last_ignoreval && STREQ (this_ignoreval, ivp->last_ignoreval)) ||
+      (!this_ignoreval && !ivp->last_ignoreval))
+    return;
+
+  /* Oops.  The ignore variable has changed.  Re-parse it. */
+  ivp->num_ignores = 0;
+
+  if (ivp->ignores)
+    {
+      for (p = ivp->ignores; p->val; p++)
+	free(p->val);
+      free (ivp->ignores);
+      ivp->ignores = (struct ign *)NULL;
+    }
+
+  if (ivp->last_ignoreval)
+    {
+      free (ivp->last_ignoreval);
+      ivp->last_ignoreval = (char *)NULL;
+    }
+
+  if (this_ignoreval == 0 || *this_ignoreval == '\0')
+    return;
+
+  ivp->last_ignoreval = savestring (this_ignoreval);
+
+  numitems = maxitems = ptr = 0;
+
+#if 0
+  while (colon_bit = extract_colon_unit (this_ignoreval, &ptr))
+#else
+  while (colon_bit = split_ignorespec (this_ignoreval, &ptr))
+#endif
+    {
+      if (numitems + 1 >= maxitems)
+	{
+	  maxitems += 10;
+	  ivp->ignores = (struct ign *)xrealloc (ivp->ignores, maxitems * sizeof (struct ign));
+	}
+      ivp->ignores[numitems].val = colon_bit;
+      ivp->ignores[numitems].len = strlen (colon_bit);
+      ivp->ignores[numitems].flags = 0;
+      if (ivp->item_func)
+	(*ivp->item_func) (&ivp->ignores[numitems]);
+      numitems++;
+    }
+  ivp->ignores[numitems].val = (char *)NULL;
+  ivp->num_ignores = numitems;
+}
diff --git a/pathexp.h b/pathexp.h
new file mode 100644
index 0000000..7ed0d2a
--- /dev/null
+++ b/pathexp.h
@@ -0,0 +1,107 @@
+/* pathexp.h -- The shell interface to the globbing library. */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_PATHEXP_H_)
+#define _PATHEXP_H_
+
+#if defined (USE_POSIX_GLOB_LIBRARY)
+#  define GLOB_FAILED(glist)	!(glist)
+#else /* !USE_POSIX_GLOB_LIBRARY */
+#  define GLOB_FAILED(glist)	(glist) == (char **)&glob_error_return
+extern int noglob_dot_filenames;
+extern char *glob_error_return;
+#endif /* !USE_POSIX_GLOB_LIBRARY */
+
+/* Flag values for quote_string_for_globbing */
+#define QGLOB_CVTNULL	0x01	/* convert QUOTED_NULL strings to '\0' */
+#define QGLOB_FILENAME	0x02	/* do correct quoting for matching filenames */
+#define QGLOB_REGEXP	0x04	/* quote an ERE for regcomp/regexec */
+#define QGLOB_CTLESC	0x08	/* turn CTLESC CTLESC into CTLESC for BREs */
+#define QGLOB_DEQUOTE	0x10	/* like dequote_string but quote glob chars */
+
+#if defined (EXTENDED_GLOB)
+/* Flags to OR with other flag args to strmatch() to enabled the extended
+   pattern matching. */
+#  define FNMATCH_EXTFLAG	(extended_glob ? FNM_EXTMATCH : 0)
+#else
+#  define FNMATCH_EXTFLAG	0
+#endif /* !EXTENDED_GLOB */
+
+#define FNMATCH_IGNCASE		(match_ignore_case ? FNM_CASEFOLD : 0)
+#define FNMATCH_NOCASEGLOB	(glob_ignore_case ? FNM_CASEFOLD : 0)
+
+extern int glob_dot_filenames;
+extern int extended_glob;
+extern int glob_star;
+extern int match_ignore_case;	/* doesn't really belong here */
+
+extern int unquoted_glob_pattern_p PARAMS((char *));
+
+/* PATHNAME can contain characters prefixed by CTLESC; this indicates
+   that the character is to be quoted.  We quote it here in the style
+   that the glob library recognizes.  If flags includes QGLOB_CVTNULL,
+   we change quoted null strings (pathname[0] == CTLNUL) into empty
+   strings (pathname[0] == 0).  If this is called after quote removal
+   is performed, (flags & QGLOB_CVTNULL) should be 0; if called when quote
+   removal has not been done (for example, before attempting to match a
+   pattern while executing a case statement), flags should include
+   QGLOB_CVTNULL.  If flags includes QGLOB_FILENAME, appropriate quoting
+   to match a filename should be performed. */
+extern char *quote_string_for_globbing PARAMS((const char *, int));
+
+extern int glob_char_p PARAMS((const char *));
+extern char *quote_globbing_chars PARAMS((const char *));
+
+/* Call the glob library to do globbing on PATHNAME. FLAGS is additional
+   flags to pass to QUOTE_STRING_FOR_GLOBBING, mostly having to do with
+   whether or not we've already performed quote removal. */
+extern char **shell_glob_filename PARAMS((const char *, int));
+
+/* Filename completion ignore.  Used to implement the "fignore" facility of
+   tcsh, GLOBIGNORE (like ksh-93 FIGNORE), and EXECIGNORE.
+
+   It is passed a NULL-terminated array of (char *)'s that must be
+   free()'d if they are deleted.  The first element (names[0]) is the
+   least-common-denominator string of the matching patterns (i.e.
+   u<TAB> produces names[0] = "und", names[1] = "under.c", names[2] =
+   "undun.c", name[3] = NULL).  */
+
+struct ign {
+  char *val;
+  int len, flags;
+};
+
+typedef int sh_iv_item_func_t PARAMS((struct ign *));
+
+struct ignorevar {
+  char *varname;	/* FIGNORE, GLOBIGNORE, or EXECIGNORE */
+  struct ign *ignores;	/* Store the ignore strings here */
+  int num_ignores;	/* How many are there? */
+  char *last_ignoreval;	/* Last value of variable - cached for speed */
+  sh_iv_item_func_t *item_func; /* Called when each item is parsed from $`varname' */
+};
+
+extern void setup_ignore_patterns PARAMS((struct ignorevar *));
+
+extern void setup_glob_ignore PARAMS((char *));
+extern int should_ignore_glob_matches PARAMS((void));
+extern void ignore_glob_matches PARAMS((char **));
+
+#endif
diff --git a/pathnames.h.in b/pathnames.h.in
new file mode 100644
index 0000000..38d0939
--- /dev/null
+++ b/pathnames.h.in
@@ -0,0 +1,33 @@
+/* pathnames.h -- absolute filenames that bash wants for various defaults. */
+
+/* Copyright (C) 1987-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_PATHNAMES_H_)
+#define _PATHNAMES_H_
+
+/* The default file for hostname completion. */
+#define DEFAULT_HOSTS_FILE "/etc/hosts"
+
+/* The default login shell startup file. */
+#define SYS_PROFILE "/etc/profile"
+
+/* The default location of the bash debugger initialization/startup file. */
+#define DEBUGGER_START_FILE	"@DEBUGGER_START_FILE@"
+
+#endif /* _PATHNAMES_H */
diff --git a/pcomplete.c b/pcomplete.c
new file mode 100644
index 0000000..fe1a032
--- /dev/null
+++ b/pcomplete.c
@@ -0,0 +1,1754 @@
+/* pcomplete.c - functions to generate lists of matches for programmable completion. */
+
+/* Copyright (C) 1999-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (PROGRAMMABLE_COMPLETION)
+
+#include "bashtypes.h"
+#include "posixstat.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <signal.h>
+
+#if defined (PREFER_STDARG)
+#  include <stdarg.h>
+#else
+#  include <varargs.h>
+#endif
+
+#include "posixtime.h"
+
+#include <stdio.h>
+#include "bashansi.h"
+#include "bashintl.h"
+
+#include "shell.h"
+#include "pcomplete.h"
+#include "alias.h"
+#include "bashline.h"
+#include "execute_cmd.h"
+#include "pathexp.h"
+
+#if defined (JOB_CONTROL)
+#  include "jobs.h"
+#endif
+
+#if !defined (NSIG)
+#  include "trap.h"
+#endif
+
+#include "shmbutil.h"
+
+#include "builtins.h"
+#include "builtins/common.h"
+#include "builtins/builtext.h"
+
+#include <glob/glob.h>
+#include <glob/strmatch.h>
+
+#include <readline/rlconf.h>
+#include <readline/readline.h>
+#include <readline/history.h>
+
+#ifdef STRDUP
+#  undef STRDUP
+#endif
+#define STRDUP(x)	((x) ? savestring (x) : (char *)NULL)
+
+typedef SHELL_VAR **SVFUNC ();
+
+#ifndef HAVE_STRPBRK
+extern char *strpbrk PARAMS((char *, char *));
+#endif
+
+extern STRING_INT_ALIST word_token_alist[];
+extern char *signal_names[];
+
+#if defined (DEBUG)
+#if defined (PREFER_STDARG)
+static void debug_printf (const char *, ...)  __attribute__((__format__ (printf, 1, 2)));
+#endif
+#endif /* DEBUG */
+
+static int it_init_joblist PARAMS((ITEMLIST *, int));
+
+static int it_init_aliases PARAMS((ITEMLIST *));
+static int it_init_arrayvars PARAMS((ITEMLIST *));
+static int it_init_bindings PARAMS((ITEMLIST *));
+static int it_init_builtins PARAMS((ITEMLIST *));
+static int it_init_disabled PARAMS((ITEMLIST *));
+static int it_init_enabled PARAMS((ITEMLIST *));
+static int it_init_exported PARAMS((ITEMLIST *));
+static int it_init_functions PARAMS((ITEMLIST *));
+static int it_init_helptopics PARAMS((ITEMLIST *));
+static int it_init_hostnames PARAMS((ITEMLIST *));
+static int it_init_jobs PARAMS((ITEMLIST *));
+static int it_init_running PARAMS((ITEMLIST *));
+static int it_init_stopped PARAMS((ITEMLIST *));
+static int it_init_keywords PARAMS((ITEMLIST *));
+static int it_init_signals PARAMS((ITEMLIST *));
+static int it_init_variables PARAMS((ITEMLIST *));
+static int it_init_setopts PARAMS((ITEMLIST *));
+static int it_init_shopts PARAMS((ITEMLIST *));
+
+static int shouldexp_filterpat PARAMS((char *));
+static char *preproc_filterpat PARAMS((char *, const char *));
+
+static void init_itemlist_from_varlist PARAMS((ITEMLIST *, SVFUNC *));
+
+static STRINGLIST *gen_matches_from_itemlist PARAMS((ITEMLIST *, const char *));
+static STRINGLIST *gen_action_completions PARAMS((COMPSPEC *, const char *));
+static STRINGLIST *gen_globpat_matches PARAMS((COMPSPEC *, const char *));
+static STRINGLIST *gen_wordlist_matches PARAMS((COMPSPEC *, const char *));
+static STRINGLIST *gen_shell_function_matches PARAMS((COMPSPEC *, const char *,
+						   const char *,
+						   char *, int, WORD_LIST *,
+						   int, int, int *));
+static STRINGLIST *gen_command_matches PARAMS((COMPSPEC *, const char *,
+					    const char *,
+					    char *, int, WORD_LIST *,
+					    int, int));
+
+static STRINGLIST *gen_progcomp_completions PARAMS((const char *, const char *,
+						 const char *,
+						 int, int, int *, int *,
+						 COMPSPEC **));
+
+static char *pcomp_filename_completion_function PARAMS((const char *, int));
+
+#if defined (ARRAY_VARS)
+static SHELL_VAR *bind_comp_words PARAMS((WORD_LIST *));
+#endif
+static void bind_compfunc_variables PARAMS((char *, int, WORD_LIST *, int, int));
+static void unbind_compfunc_variables PARAMS((int));
+static WORD_LIST *build_arg_list PARAMS((char *, const char *, const char *, WORD_LIST *, int));
+static WORD_LIST *command_line_to_word_list PARAMS((char *, int, int, int *, int *));
+
+#ifdef DEBUG
+static int progcomp_debug = 0;
+#endif
+
+int prog_completion_enabled = 1;
+
+#ifdef ALIAS
+int progcomp_alias = 0;	/* unavailable to user code for now */
+#endif
+
+/* These are used to manage the arrays of strings for possible completions. */
+ITEMLIST it_aliases = { 0, it_init_aliases, (STRINGLIST *)0 };
+ITEMLIST it_arrayvars  = { LIST_DYNAMIC, it_init_arrayvars, (STRINGLIST *)0 };
+ITEMLIST it_bindings  = { 0, it_init_bindings, (STRINGLIST *)0 };
+ITEMLIST it_builtins  = { 0, it_init_builtins, (STRINGLIST *)0 };
+ITEMLIST it_commands = { LIST_DYNAMIC };	/* unused */
+ITEMLIST it_directories = { LIST_DYNAMIC };	/* unused */
+ITEMLIST it_disabled = { 0, it_init_disabled, (STRINGLIST *)0 };
+ITEMLIST it_enabled = { 0, it_init_enabled, (STRINGLIST *)0 };
+ITEMLIST it_exports  = { LIST_DYNAMIC, it_init_exported, (STRINGLIST *)0 };
+ITEMLIST it_files = { LIST_DYNAMIC };		/* unused */
+ITEMLIST it_functions  = { 0, it_init_functions, (STRINGLIST *)0 };
+ITEMLIST it_helptopics  = { 0, it_init_helptopics, (STRINGLIST *)0 };
+ITEMLIST it_hostnames  = { LIST_DYNAMIC, it_init_hostnames, (STRINGLIST *)0 };
+ITEMLIST it_groups = { LIST_DYNAMIC };		/* unused */
+ITEMLIST it_jobs = { LIST_DYNAMIC, it_init_jobs, (STRINGLIST *)0 };
+ITEMLIST it_keywords = { 0, it_init_keywords, (STRINGLIST *)0 };
+ITEMLIST it_running = { LIST_DYNAMIC, it_init_running, (STRINGLIST *)0 };
+ITEMLIST it_services = { LIST_DYNAMIC };	/* unused */
+ITEMLIST it_setopts = { 0, it_init_setopts, (STRINGLIST *)0 };
+ITEMLIST it_shopts = { 0, it_init_shopts, (STRINGLIST *)0 };
+ITEMLIST it_signals = { 0, it_init_signals, (STRINGLIST *)0 };
+ITEMLIST it_stopped = { LIST_DYNAMIC, it_init_stopped, (STRINGLIST *)0 };
+ITEMLIST it_users = { LIST_DYNAMIC };		/* unused */
+ITEMLIST it_variables = { LIST_DYNAMIC, it_init_variables, (STRINGLIST *)0 };
+
+COMPSPEC *pcomp_curcs;
+const char *pcomp_curcmd;
+const char *pcomp_curtxt;
+
+char *pcomp_line;
+int pcomp_ind;
+
+#ifdef DEBUG
+/* Debugging code */
+static void
+#if defined (PREFER_STDARG)
+debug_printf (const char *format, ...)
+#else
+debug_printf (format, va_alist)
+     const char *format;
+     va_dcl
+#endif
+{
+  va_list args;
+
+  if (progcomp_debug == 0)
+    return;
+
+  SH_VA_START (args, format);
+
+  fprintf (stdout, "DEBUG: ");
+  vfprintf (stdout, format, args);
+  fprintf (stdout, "\n");
+
+  rl_on_new_line ();
+
+  va_end (args);
+}
+#endif
+
+/* Functions to manage the item lists */
+
+void
+set_itemlist_dirty (it)
+     ITEMLIST *it;
+{
+  it->flags |= LIST_DIRTY;
+}
+
+void
+initialize_itemlist (itp)
+     ITEMLIST *itp;
+{
+  (*itp->list_getter) (itp);
+  itp->flags |= LIST_INITIALIZED;
+  itp->flags &= ~LIST_DIRTY;
+}
+
+void
+clean_itemlist (itp)
+     ITEMLIST *itp;
+{
+  STRINGLIST *sl;
+
+  sl = itp->slist;
+  if (sl)
+    {
+      if ((itp->flags & (LIST_DONTFREEMEMBERS|LIST_DONTFREE)) == 0)
+	strvec_flush (sl->list);
+      if ((itp->flags & LIST_DONTFREE) == 0)
+	free (sl->list);
+      free (sl);
+    }
+  itp->slist = (STRINGLIST *)NULL;
+  itp->flags &= ~(LIST_DONTFREE|LIST_DONTFREEMEMBERS|LIST_INITIALIZED|LIST_DIRTY);
+}
+
+
+static int
+shouldexp_filterpat (s)
+     char *s;
+{
+  register char *p;
+
+  for (p = s; p && *p; p++)
+    {
+      if (*p == '\\')
+	p++;
+      else if (*p == '&')
+	return 1;
+    }
+  return 0;
+}
+
+/* Replace any instance of `&' in PAT with TEXT.  Backslash may be used to
+   quote a `&' and inhibit substitution.  Returns a new string.  This just
+   calls stringlib.c:strcreplace(). */
+static char *
+preproc_filterpat (pat, text)
+     char *pat;
+     const char *text;
+{
+  char *ret;
+
+  ret = strcreplace (pat, '&', text, 1);
+  return ret;
+}
+	
+/* Remove any match of FILTERPAT from SL.  A `&' in FILTERPAT is replaced by
+   TEXT.  A leading `!' in FILTERPAT negates the pattern; in this case
+   any member of SL->list that does *not* match will be removed.  This returns
+   a new STRINGLIST with the matching members of SL *copied*.  Any
+   non-matching members of SL->list are *freed*. */   
+STRINGLIST *
+filter_stringlist (sl, filterpat, text)
+     STRINGLIST *sl;
+     char *filterpat;
+     const char *text;
+{
+  int i, m, not;
+  STRINGLIST *ret;
+  char *npat, *t;
+
+  if (sl == 0 || sl->list == 0 || sl->list_len == 0)
+    return sl;
+
+  npat = shouldexp_filterpat (filterpat) ? preproc_filterpat (filterpat, text) : filterpat;
+
+#if defined (EXTENDED_GLOB)
+  not = (npat[0] == '!' && (extended_glob == 0 || npat[1] != '('));	/*)*/
+#else
+  not = (npat[0] == '!');
+#endif
+  t = not ? npat + 1 : npat;
+
+  ret = strlist_create (sl->list_size);
+  for (i = 0; i < sl->list_len; i++)
+    {
+      m = strmatch (t, sl->list[i], FNMATCH_EXTFLAG | FNMATCH_IGNCASE);
+      if ((not && m == FNM_NOMATCH) || (not == 0 && m != FNM_NOMATCH))
+	free (sl->list[i]);
+      else
+	ret->list[ret->list_len++] = sl->list[i];
+    }
+
+  ret->list[ret->list_len] = (char *)NULL;
+  if (npat != filterpat)
+    free (npat);
+
+  return ret;
+}
+
+/* Turn an array of strings returned by rl_completion_matches into a STRINGLIST.
+   This understands how rl_completion_matches sets matches[0] (the lcd of the
+   strings in the list, unless it's the only match). */
+STRINGLIST *
+completions_to_stringlist (matches)
+     char **matches;
+{
+  STRINGLIST *sl;
+  int mlen, i, n;
+
+  mlen = (matches == 0) ? 0 : strvec_len (matches);
+  sl = strlist_create (mlen + 1);
+
+  if (matches == 0 || matches[0] == 0)
+    return sl;
+
+  if (matches[1] == 0)
+    {
+      sl->list[0] = STRDUP (matches[0]);
+      sl->list[sl->list_len = 1] = (char *)NULL;
+      return sl;
+    }
+
+  for (i = 1, n = 0; i < mlen; i++, n++)
+    sl->list[n] = STRDUP (matches[i]);
+  sl->list_len = n;
+  sl->list[n] = (char *)NULL;
+
+  return sl;
+}
+
+/* Functions to manage the various ITEMLISTs that we populate internally.
+   The caller is responsible for setting ITP->flags correctly. */
+
+static int
+it_init_aliases (itp)
+     ITEMLIST *itp;
+{
+#ifdef ALIAS
+  alias_t **alias_list;
+  register int i, n;
+  STRINGLIST *sl;
+
+  alias_list = all_aliases ();
+  if (alias_list == 0)
+    {
+      itp->slist = (STRINGLIST *)NULL;
+      return 0;
+    }
+  for (n = 0; alias_list[n]; n++)
+    ;
+  sl = strlist_create (n+1);
+  for (i = 0; i < n; i++)
+    sl->list[i] = STRDUP (alias_list[i]->name);
+  sl->list[n] = (char *)NULL;
+  sl->list_size = sl->list_len = n;
+  itp->slist = sl;
+#else
+  itp->slist = (STRINGLIST *)NULL;
+#endif
+  free (alias_list);
+  return 1;
+}
+
+static void
+init_itemlist_from_varlist (itp, svfunc)
+     ITEMLIST *itp;
+     SVFUNC *svfunc;
+{
+  SHELL_VAR **vlist;
+  STRINGLIST *sl;
+  register int i, n;
+
+  vlist = (*svfunc) ();
+  if (vlist == 0)
+    {
+      itp->slist = (STRINGLIST *)NULL;
+      return;
+    }    
+  for (n = 0; vlist[n]; n++)
+    ;
+  sl = strlist_create (n+1);
+  for (i = 0; i < n; i++)
+    sl->list[i] = savestring (vlist[i]->name);
+  sl->list[sl->list_len = n] = (char *)NULL;
+  itp->slist = sl;
+}
+
+static int
+it_init_arrayvars (itp)
+     ITEMLIST *itp;
+{
+#if defined (ARRAY_VARS)
+  init_itemlist_from_varlist (itp, all_array_variables);
+  return 1;
+#else
+  return 0;
+#endif
+}
+
+static int
+it_init_bindings (itp)
+     ITEMLIST *itp;
+{
+  char **blist;
+  STRINGLIST *sl;
+
+  /* rl_funmap_names allocates blist, but not its members */
+  blist = (char **)rl_funmap_names ();	/* XXX fix const later */
+  sl = strlist_create (0);
+  sl->list = blist;
+  sl->list_size = 0;
+  sl->list_len = strvec_len (sl->list);
+  itp->flags |= LIST_DONTFREEMEMBERS;
+  itp->slist = sl;
+
+  return 0;
+}
+
+static int
+it_init_builtins (itp)
+     ITEMLIST *itp;
+{
+  STRINGLIST *sl;
+  register int i, n;
+
+  sl = strlist_create (num_shell_builtins);
+  for (i = n = 0; i < num_shell_builtins; i++)
+    if (shell_builtins[i].function)
+      sl->list[n++] = shell_builtins[i].name;
+  sl->list[sl->list_len = n] = (char *)NULL;
+  itp->flags |= LIST_DONTFREEMEMBERS;
+  itp->slist = sl;
+  return 0;
+}
+
+static int
+it_init_enabled (itp)
+     ITEMLIST *itp;
+{
+  STRINGLIST *sl;
+  register int i, n;
+
+  sl = strlist_create (num_shell_builtins);
+  for (i = n = 0; i < num_shell_builtins; i++)
+    {
+      if (shell_builtins[i].function && (shell_builtins[i].flags & BUILTIN_ENABLED))
+	sl->list[n++] = shell_builtins[i].name;
+    }
+  sl->list[sl->list_len = n] = (char *)NULL;
+  itp->flags |= LIST_DONTFREEMEMBERS;
+  itp->slist = sl;
+  return 0;
+}
+
+static int
+it_init_disabled (itp)
+     ITEMLIST *itp;
+{
+  STRINGLIST *sl;
+  register int i, n;
+
+  sl = strlist_create (num_shell_builtins);
+  for (i = n = 0; i < num_shell_builtins; i++)
+    {
+      if (shell_builtins[i].function && ((shell_builtins[i].flags & BUILTIN_ENABLED) == 0))
+	sl->list[n++] = shell_builtins[i].name;
+    }
+  sl->list[sl->list_len = n] = (char *)NULL;
+  itp->flags |= LIST_DONTFREEMEMBERS;
+  itp->slist = sl;
+  return 0;
+}
+
+static int
+it_init_exported (itp)
+     ITEMLIST *itp;
+{
+  init_itemlist_from_varlist (itp, all_exported_variables);
+  return 0;
+}
+
+static int
+it_init_functions (itp)
+     ITEMLIST *itp;
+{
+  init_itemlist_from_varlist (itp, all_visible_functions);
+  return 0;
+}
+
+/* Like it_init_builtins, but includes everything the help builtin looks at,
+   not just builtins with an active implementing function. */
+static int
+it_init_helptopics (itp)
+     ITEMLIST *itp;
+{
+  STRINGLIST *sl;
+  register int i, n;
+
+  sl = strlist_create (num_shell_builtins);
+  for (i = n = 0; i < num_shell_builtins; i++)
+    sl->list[n++] = shell_builtins[i].name;
+  sl->list[sl->list_len = n] = (char *)NULL;
+  itp->flags |= LIST_DONTFREEMEMBERS;
+  itp->slist = sl;
+  return 0;
+}
+
+static int
+it_init_hostnames (itp)
+     ITEMLIST *itp;
+{
+  STRINGLIST *sl;
+
+  sl = strlist_create (0);
+  sl->list = get_hostname_list ();
+  sl->list_len = sl->list ? strvec_len (sl->list) : 0;
+  sl->list_size = sl->list_len;
+  itp->slist = sl;
+  itp->flags |= LIST_DONTFREEMEMBERS|LIST_DONTFREE;
+  return 0;
+}
+
+static int
+it_init_joblist (itp, jstate)
+     ITEMLIST *itp;
+     int jstate;
+{
+#if defined (JOB_CONTROL)
+  STRINGLIST *sl;
+  register int i;
+  register PROCESS *p;
+  char *s, *t;
+  JOB *j;
+  JOB_STATE ws;		/* wanted state */
+
+  ws = JNONE;
+  if (jstate == 0)
+    ws = JRUNNING;
+  else if (jstate == 1)
+    ws = JSTOPPED;
+
+  sl = strlist_create (js.j_jobslots);
+  for (i = js.j_jobslots - 1; i >= 0; i--)
+    {
+      j = get_job_by_jid (i);
+      if (j == 0)
+	continue;
+      p = j->pipe;
+      if (jstate == -1 || JOBSTATE(i) == ws)
+	{
+	  s = savestring (p->command);
+	  t = strpbrk (s, " \t\n");
+	  if (t)
+	    *t = '\0';
+	  sl->list[sl->list_len++] = s;
+	}
+    }
+  itp->slist = sl;
+#else
+  itp->slist = (STRINGLIST *)NULL;
+#endif
+  return 0;
+}
+
+static int
+it_init_jobs (itp)
+     ITEMLIST *itp;
+{
+  return (it_init_joblist (itp, -1));
+}
+
+static int
+it_init_running (itp)
+     ITEMLIST *itp;
+{
+  return (it_init_joblist (itp, 0));
+}
+
+static int
+it_init_stopped (itp)
+     ITEMLIST *itp;
+{
+  return (it_init_joblist (itp, 1));
+}
+
+static int
+it_init_keywords (itp)
+     ITEMLIST *itp;
+{
+  STRINGLIST *sl;
+  register int i, n;
+
+  for (n = 0; word_token_alist[n].word; n++)
+    ;
+  sl = strlist_create (n);
+  for (i = 0; i < n; i++)
+    sl->list[i] = word_token_alist[i].word;
+  sl->list[sl->list_len = i] = (char *)NULL;
+  itp->flags |= LIST_DONTFREEMEMBERS;
+  itp->slist = sl;
+  return 0;
+}
+
+static int
+it_init_signals (itp)
+     ITEMLIST *itp;
+{
+  STRINGLIST *sl;
+
+  sl = strlist_create (0);
+  sl->list = signal_names;
+  sl->list_len = strvec_len (sl->list);
+  itp->flags |= LIST_DONTFREE;
+  itp->slist = sl;
+  return 0;
+}
+
+static int
+it_init_variables (itp)
+     ITEMLIST *itp;
+{
+  init_itemlist_from_varlist (itp, all_visible_variables);
+  return 0;
+}
+
+static int
+it_init_setopts (itp)
+     ITEMLIST *itp;
+{
+  STRINGLIST *sl;
+
+  sl = strlist_create (0);
+  sl->list = get_minus_o_opts ();
+  sl->list_len = strvec_len (sl->list);
+  itp->slist = sl;
+  itp->flags |= LIST_DONTFREEMEMBERS;
+  return 0;
+}
+
+static int
+it_init_shopts (itp)
+     ITEMLIST *itp;
+{
+  STRINGLIST *sl;
+
+  sl = strlist_create (0);
+  sl->list = get_shopt_options ();
+  sl->list_len = strvec_len (sl->list);
+  itp->slist = sl;
+  itp->flags |= LIST_DONTFREEMEMBERS;
+  return 0;
+}
+
+/* Generate a list of all matches for TEXT using the STRINGLIST in itp->slist
+   as the list of possibilities.  If the itemlist has been marked dirty or
+   it should be regenerated every time, destroy the old STRINGLIST and make a
+   new one before trying the match.  TEXT is dequoted before attempting a
+   match. */
+static STRINGLIST *
+gen_matches_from_itemlist (itp, text)
+     ITEMLIST *itp;
+     const char *text;
+{
+  STRINGLIST *ret, *sl;
+  int tlen, i, n;
+  char *ntxt;
+
+  if ((itp->flags & (LIST_DIRTY|LIST_DYNAMIC)) ||
+      (itp->flags & LIST_INITIALIZED) == 0)
+    {
+      if (itp->flags & (LIST_DIRTY|LIST_DYNAMIC))
+	clean_itemlist (itp);
+      if ((itp->flags & LIST_INITIALIZED) == 0)
+	initialize_itemlist (itp);
+    }
+  if (itp->slist == 0)
+    return ((STRINGLIST *)NULL);
+  ret = strlist_create (itp->slist->list_len+1);
+  sl = itp->slist;
+
+  ntxt = bash_dequote_text (text);
+  tlen = STRLEN (ntxt);
+
+  for (i = n = 0; i < sl->list_len; i++)
+    {
+      if (tlen == 0 || STREQN (sl->list[i], ntxt, tlen))
+	ret->list[n++] = STRDUP (sl->list[i]);
+    }
+  ret->list[ret->list_len = n] = (char *)NULL;
+
+  FREE (ntxt);
+  return ret;
+}
+
+/* A wrapper for rl_filename_completion_function that dequotes the filename
+   before attempting completions. */
+static char *
+pcomp_filename_completion_function (text, state)
+     const char *text;
+     int state;
+{
+  static char *dfn;	/* dequoted filename */
+  int iscompgen, iscompleting;
+
+  if (state == 0)
+    {
+      FREE (dfn);
+      /* remove backslashes quoting special characters in filenames. */
+      /* There are roughly three paths we can follow to get here:
+		1.  complete -f
+		2.  compgen -f "$word" from a completion function
+		3.  compgen -f "$word" from the command line
+	 They all need to be handled.
+
+	 In the first two cases, readline will run the filename dequoting
+	 function in rl_filename_completion_function if it found a filename
+	 quoting character in the word to be completed
+	 (rl_completion_found_quote).  We run the dequoting function here
+	 if we're running compgen, we're not completing, and the
+	 rl_filename_completion_function won't dequote the filename
+	 (rl_completion_found_quote == 0). */
+      iscompgen = this_shell_builtin == compgen_builtin;
+      iscompleting = RL_ISSTATE (RL_STATE_COMPLETING);
+      if (iscompgen && iscompleting == 0 && rl_completion_found_quote == 0
+	  && rl_filename_dequoting_function)
+	{
+	  /* Use rl_completion_quote_character because any single or
+	     double quotes have been removed by the time TEXT makes it
+	     here, and we don't want to remove backslashes inside
+	     quoted strings. */
+	  dfn = (*rl_filename_dequoting_function) ((char *)text, rl_completion_quote_character);
+	}
+      /* Intended to solve a mismatched assumption by bash-completion.  If
+	 the text to be completed is empty, but bash-completion turns it into
+	 a quoted string ('') assuming that this code will dequote it before
+	 calling readline, do the dequoting. */
+      else if (iscompgen && iscompleting &&
+	       pcomp_curtxt && *pcomp_curtxt == 0 &&
+	       text && (*text == '\'' || *text == '"') && text[1] == text[0] && text[2] == 0 && 
+	       rl_filename_dequoting_function)
+	dfn = (*rl_filename_dequoting_function) ((char *)text, rl_completion_quote_character);
+      /* Another mismatched assumption by bash-completion.  If compgen is being
+      	 run as part of bash-completion, and the argument to compgen is not
+      	 the same as the word originally passed to the programmable completion
+      	 code, dequote the argument if it has quote characters.  It's an
+      	 attempt to detect when bash-completion is quoting its filename
+      	 argument before calling compgen. */
+      /* We could check whether gen_shell_function_matches is in the call
+	 stack by checking whether the gen-shell-function-matches tag is in
+	 the unwind-protect stack, but there's no function to do that yet.
+	 We could simply check whether we're executing in a function by
+	 checking variable_context, and may end up doing that. */
+      else if (iscompgen && iscompleting && rl_filename_dequoting_function &&
+	       pcomp_curtxt && text &&
+	       STREQ (pcomp_curtxt, text) == 0 &&
+	       variable_context &&
+	       sh_contains_quotes (text))	/* guess */
+	dfn = (*rl_filename_dequoting_function) ((char *)text, rl_completion_quote_character);
+      else
+	dfn = savestring (text);
+    }
+
+  return (rl_filename_completion_function (dfn, state));
+}
+
+#define GEN_COMPS(bmap, flag, it, text, glist, tlist) \
+  do { \
+    if (bmap & flag) \
+      { \
+	tlist = gen_matches_from_itemlist (it, text); \
+	if (tlist) \
+	  { \
+	    glist = strlist_append (glist, tlist); \
+	    strlist_dispose (tlist); \
+	  } \
+      } \
+  } while (0)
+
+#define GEN_XCOMPS(bmap, flag, text, func, cmatches, glist, tlist) \
+  do { \
+    if (bmap & flag) \
+      { \
+	cmatches = rl_completion_matches (text, func); \
+	tlist = completions_to_stringlist (cmatches); \
+	glist = strlist_append (glist, tlist); \
+	strvec_dispose (cmatches); \
+	strlist_dispose (tlist); \
+      } \
+  } while (0)
+
+/* Functions to generate lists of matches from the actions member of CS. */
+
+static STRINGLIST *
+gen_action_completions (cs, text)
+     COMPSPEC *cs;
+     const char *text;
+{
+  STRINGLIST *ret, *tmatches;
+  char **cmatches;	/* from rl_completion_matches ... */
+  unsigned long flags;
+  int t;
+
+  ret = tmatches = (STRINGLIST *)NULL;
+  flags = cs->actions;
+
+  GEN_COMPS (flags, CA_ALIAS, &it_aliases, text, ret, tmatches);
+  GEN_COMPS (flags, CA_ARRAYVAR, &it_arrayvars, text, ret, tmatches);
+  GEN_COMPS (flags, CA_BINDING, &it_bindings, text, ret, tmatches);
+  GEN_COMPS (flags, CA_BUILTIN, &it_builtins, text, ret, tmatches);
+  GEN_COMPS (flags, CA_DISABLED, &it_disabled, text, ret, tmatches);
+  GEN_COMPS (flags, CA_ENABLED, &it_enabled, text, ret, tmatches);
+  GEN_COMPS (flags, CA_EXPORT, &it_exports, text, ret, tmatches);
+  GEN_COMPS (flags, CA_FUNCTION, &it_functions, text, ret, tmatches);
+  GEN_COMPS (flags, CA_HELPTOPIC, &it_helptopics, text, ret, tmatches);
+  GEN_COMPS (flags, CA_HOSTNAME, &it_hostnames, text, ret, tmatches);
+  GEN_COMPS (flags, CA_JOB, &it_jobs, text, ret, tmatches);
+  GEN_COMPS (flags, CA_KEYWORD, &it_keywords, text, ret, tmatches);
+  GEN_COMPS (flags, CA_RUNNING, &it_running, text, ret, tmatches);
+  GEN_COMPS (flags, CA_SETOPT, &it_setopts, text, ret, tmatches);
+  GEN_COMPS (flags, CA_SHOPT, &it_shopts, text, ret, tmatches);
+  GEN_COMPS (flags, CA_SIGNAL, &it_signals, text, ret, tmatches);
+  GEN_COMPS (flags, CA_STOPPED, &it_stopped, text, ret, tmatches);
+  GEN_COMPS (flags, CA_VARIABLE, &it_variables, text, ret, tmatches);
+
+  GEN_XCOMPS(flags, CA_COMMAND, text, command_word_completion_function, cmatches, ret, tmatches);
+  GEN_XCOMPS(flags, CA_FILE, text, pcomp_filename_completion_function, cmatches, ret, tmatches);
+  GEN_XCOMPS(flags, CA_USER, text, rl_username_completion_function, cmatches, ret, tmatches);
+  GEN_XCOMPS(flags, CA_GROUP, text, bash_groupname_completion_function, cmatches, ret, tmatches);
+  GEN_XCOMPS(flags, CA_SERVICE, text, bash_servicename_completion_function, cmatches, ret, tmatches);
+
+  /* And lastly, the special case for directories */
+  if (flags & CA_DIRECTORY)
+    {
+      t = rl_filename_completion_desired;
+      rl_completion_mark_symlink_dirs = 1;	/* override user preference */
+      cmatches = bash_directory_completion_matches (text);
+      /* If we did not want filename completion before this, and there are
+	 no matches, turn off rl_filename_completion_desired so whatever
+	 matches we get are not treated as filenames (it gets turned on by
+	 rl_filename_completion_function unconditionally). */
+      if (t == 0 && cmatches == 0 && rl_filename_completion_desired == 1)
+        rl_filename_completion_desired = 0;
+      tmatches = completions_to_stringlist (cmatches);
+      ret = strlist_append (ret, tmatches);
+      strvec_dispose (cmatches);
+      strlist_dispose (tmatches);
+    }
+
+  return ret;
+}
+
+/* Generate a list of matches for CS->globpat.  Unresolved: should this use
+   TEXT as a match prefix, or just go without?  Currently, the code does not
+   use TEXT, just globs CS->globpat and returns the results.  If we do decide
+   to use TEXT, we should call quote_string_for_globbing before the call to
+   glob_filename. */
+static STRINGLIST *
+gen_globpat_matches (cs, text)
+      COMPSPEC *cs;
+      const char *text;
+{
+  STRINGLIST *sl;
+
+  sl = strlist_create (0);
+  sl->list = glob_filename (cs->globpat, 0);
+  if (GLOB_FAILED (sl->list))
+    sl->list = (char **)NULL;
+  if (sl->list)
+    sl->list_len = sl->list_size = strvec_len (sl->list);
+  return sl;
+}
+
+/* Perform the shell word expansions on CS->words and return the results.
+   Again, this ignores TEXT. */
+static STRINGLIST *
+gen_wordlist_matches (cs, text)
+     COMPSPEC *cs;
+     const char *text;
+{
+  WORD_LIST *l, *l2;
+  STRINGLIST *sl;
+  int nw, tlen;
+  char *ntxt;		/* dequoted TEXT to use in comparisons */
+
+  if (cs->words == 0 || cs->words[0] == '\0')
+    return ((STRINGLIST *)NULL);
+
+  /* This used to be a simple expand_string(cs->words, 0), but that won't
+     do -- there's no way to split a simple list into individual words
+     that way, since the shell semantics say that word splitting is done
+     only on the results of expansion.  split_at_delims also handles embedded
+     quoted strings and preserves the quotes for the expand_words_shellexp
+     function call that follows. */
+  /* XXX - this is where this function spends most of its time */
+  l = split_at_delims (cs->words, strlen (cs->words), (char *)NULL, -1, 0, (int *)NULL, (int *)NULL);
+  if (l == 0)
+    return ((STRINGLIST *)NULL);
+  /* This will jump back to the top level if the expansion fails... */
+  l2 = expand_words_shellexp (l);
+  dispose_words (l);
+
+  nw = list_length (l2);
+  sl = strlist_create (nw + 1);
+
+  ntxt = bash_dequote_text (text);
+  tlen = STRLEN (ntxt);
+
+  for (nw = 0, l = l2; l; l = l->next)
+    {
+      if (tlen == 0 || STREQN (l->word->word, ntxt, tlen))
+	sl->list[nw++] = STRDUP (l->word->word);
+    }
+  sl->list[sl->list_len = nw] = (char *)NULL;
+
+  dispose_words (l2);
+  FREE (ntxt);
+  return sl;
+}
+
+#ifdef ARRAY_VARS
+
+static SHELL_VAR *
+bind_comp_words (lwords)
+     WORD_LIST *lwords;
+{
+  SHELL_VAR *v;
+
+  v = find_variable_noref ("COMP_WORDS");
+  if (v == 0)
+    v = make_new_array_variable ("COMP_WORDS");
+  if (nameref_p (v))
+    VUNSETATTR (v, att_nameref);
+#if 0
+  if (readonly_p (v))
+    VUNSETATTR (v, att_readonly);
+#endif
+  if (array_p (v) == 0)
+    v = convert_var_to_array (v);
+  v = assign_array_var_from_word_list (v, lwords, 0);
+
+  VUNSETATTR (v, att_invisible);
+  return v;
+}
+#endif /* ARRAY_VARS */
+
+static void
+bind_compfunc_variables (line, ind, lwords, cw, exported)
+     char *line;
+     int ind;
+     WORD_LIST *lwords;
+     int cw, exported;
+{
+  char ibuf[INT_STRLEN_BOUND(int) + 1];
+  char *value;
+  SHELL_VAR *v;
+  size_t llen;
+  int c;
+
+  /* Set the variables that the function expects while it executes.  Maybe
+     these should be in the function environment (temporary_env). */
+  v = bind_variable ("COMP_LINE", line, 0);
+  if (v && exported)
+    VSETATTR(v, att_exported);
+
+  /* Post bash-4.2: COMP_POINT is characters instead of bytes. */
+  c = line[ind];
+  line[ind] = '\0';
+  llen = MB_STRLEN (line);
+  line[ind] = c;
+  value = inttostr (llen, ibuf, sizeof(ibuf));
+  v = bind_int_variable ("COMP_POINT", value, 0);
+  if (v && exported)
+    VSETATTR(v, att_exported);
+
+  value = inttostr (rl_completion_type, ibuf, sizeof (ibuf));
+  v = bind_int_variable ("COMP_TYPE", value, 0);
+  if (v && exported)
+    VSETATTR(v, att_exported);
+
+  value = inttostr (rl_completion_invoking_key, ibuf, sizeof (ibuf));
+  v = bind_int_variable ("COMP_KEY", value, 0);
+  if (v && exported)
+    VSETATTR(v, att_exported);
+
+  /* Since array variables can't be exported, we don't bother making the
+     array of words. */
+  if (exported == 0)
+    {
+#ifdef ARRAY_VARS
+      v = bind_comp_words (lwords);
+      value = inttostr (cw, ibuf, sizeof(ibuf));
+      bind_int_variable ("COMP_CWORD", value, 0);
+#endif
+    }
+  else
+    array_needs_making = 1;
+}
+
+static void
+unbind_compfunc_variables (exported)
+     int exported;
+{
+  unbind_variable_noref ("COMP_LINE");
+  unbind_variable_noref ("COMP_POINT");
+  unbind_variable_noref ("COMP_TYPE");
+  unbind_variable_noref ("COMP_KEY");
+#ifdef ARRAY_VARS
+  unbind_variable_noref ("COMP_WORDS");
+  unbind_variable_noref ("COMP_CWORD");
+#endif
+  if (exported)
+    array_needs_making = 1;
+}
+
+/* Build the list of words to pass to a function or external command
+   as arguments.  When the function or command is invoked,
+
+	$0 == function or command being invoked
+   	$1 == command name
+   	$2 == word to be completed (possibly null)
+   	$3 == previous word
+
+   Functions can access all of the words in the current command line
+   with the COMP_WORDS array.  External commands cannot; they have to
+   make do with the COMP_LINE and COMP_POINT variables. */
+
+static WORD_LIST *
+build_arg_list (cmd, cname, text, lwords, ind)
+     char *cmd;
+     const char *cname;
+     const char *text;
+     WORD_LIST *lwords;
+     int ind;
+{
+  WORD_LIST *ret, *cl, *l;
+  WORD_DESC *w;
+  int i;
+
+  ret = (WORD_LIST *)NULL;
+  w = make_word (cmd);
+  ret = make_word_list (w, (WORD_LIST *)NULL);	/* $0 */
+
+  w = make_word (cname);			/* $1 */
+  cl = ret->next = make_word_list (w, (WORD_LIST *)NULL);
+
+  w = make_word (text);
+  cl->next = make_word_list (w, (WORD_LIST *)NULL);	/* $2 */
+  cl = cl->next;
+
+  /* Search lwords for current word */
+  for (l = lwords, i = 1; l && i < ind-1; l = l->next, i++)
+    ;
+  w = (l && l->word) ? copy_word (l->word) : make_word ("");
+  cl->next = make_word_list (w, (WORD_LIST *)NULL);
+
+  return ret;
+}
+
+/* Build a command string with
+	$0 == cs->funcname	(function to execute for completion list)
+   	$1 == command name	(command being completed)
+   	$2 = word to be completed (possibly null)
+   	$3 = previous word
+   and run in the current shell.  The function should put its completion
+   list into the array variable COMPREPLY.  We build a STRINGLIST
+   from the results and return it.
+
+   Since the shell function should return its list of matches in an array
+   variable, this does nothing if arrays are not compiled into the shell. */
+
+static STRINGLIST *
+gen_shell_function_matches (cs, cmd, text, line, ind, lwords, nw, cw, foundp)
+     COMPSPEC *cs;
+     const char *cmd;
+     const char *text;
+     char *line;
+     int ind;
+     WORD_LIST *lwords;
+     int nw, cw;
+     int *foundp;
+{
+  char *funcname;
+  STRINGLIST *sl;
+  SHELL_VAR *f, *v;
+  WORD_LIST *cmdlist;
+  int fval, found;
+  sh_parser_state_t ps;
+  sh_parser_state_t * restrict pps;
+#if defined (ARRAY_VARS)
+  ARRAY *a;
+#endif
+
+  found = 0;
+  if (foundp)
+    *foundp = found;
+
+  funcname = cs->funcname;
+  f = find_function (funcname);
+  if (f == 0)
+    {
+      internal_error (_("completion: function `%s' not found"), funcname);
+      rl_ding ();
+      rl_on_new_line ();
+      return ((STRINGLIST *)NULL);
+    }
+
+#if !defined (ARRAY_VARS)
+  return ((STRINGLIST *)NULL);
+#else
+
+  /* We pass cw - 1 because command_line_to_word_list returns indices that are
+     1-based, while bash arrays are 0-based. */
+  bind_compfunc_variables (line, ind, lwords, cw - 1, 0);
+
+  cmdlist = build_arg_list (funcname, cmd, text, lwords, cw);
+
+  pps = &ps;
+  save_parser_state (pps);
+  begin_unwind_frame ("gen-shell-function-matches");
+  add_unwind_protect (restore_parser_state, (char *)pps);
+  add_unwind_protect (dispose_words, (char *)cmdlist);
+  add_unwind_protect (unbind_compfunc_variables, (char *)0);
+
+  fval = execute_shell_function (f, cmdlist);  
+
+  discard_unwind_frame ("gen-shell-function-matches");
+  restore_parser_state (pps);
+
+  found = fval != EX_NOTFOUND;
+  if (fval == EX_RETRYFAIL)
+    found |= PCOMP_RETRYFAIL;
+  if (foundp)
+    *foundp = found;
+
+  /* Now clean up and destroy everything. */
+  dispose_words (cmdlist);
+  unbind_compfunc_variables (0);
+
+  /* The list of completions is returned in the array variable COMPREPLY. */
+  v = find_variable ("COMPREPLY");
+  if (v == 0)
+    return ((STRINGLIST *)NULL);
+  if (array_p (v) == 0 && assoc_p (v) == 0)
+    v = convert_var_to_array (v);
+
+  VUNSETATTR (v, att_invisible);
+
+  a = array_cell (v);
+  if (found == 0 || (found & PCOMP_RETRYFAIL) || a == 0 || array_p (v) == 0 || array_empty (a))
+    sl = (STRINGLIST *)NULL;
+  else
+    {
+      /* XXX - should we filter the list of completions so only those matching
+	 TEXT are returned?  Right now, we do not. */
+      sl = strlist_create (0);
+      sl->list = array_to_argv (a, 0);
+      sl->list_len = sl->list_size = array_num_elements (a);
+    }
+
+  /* XXX - should we unbind COMPREPLY here? */
+  unbind_variable_noref ("COMPREPLY");
+
+  return (sl);
+#endif
+}
+
+/* Build a command string with
+	$0 == cs->command	(command to execute for completion list)
+   	$1 == command name	(command being completed)
+	$2 == word to be completed (possibly null)
+	$3 == previous word
+   and run it with command substitution.  Parse the results, one word
+   per line, with backslashes allowed to escape newlines.  Build a
+   STRINGLIST from the results and return it. */
+
+static STRINGLIST *
+gen_command_matches (cs, cmd, text, line, ind, lwords, nw, cw)
+     COMPSPEC *cs;
+     const char *cmd;
+     const char *text;
+     char *line;
+     int ind;
+     WORD_LIST *lwords;
+     int nw, cw;
+{
+  char *csbuf, *cscmd, *t;
+  int cmdlen, cmdsize, n, ws, we;
+  WORD_LIST *cmdlist, *cl;
+  WORD_DESC *tw;
+  STRINGLIST *sl;
+
+  bind_compfunc_variables (line, ind, lwords, cw, 1);
+  cmdlist = build_arg_list (cs->command, cmd, text, lwords, cw);
+
+  /* Estimate the size needed for the buffer. */
+  n = strlen (cs->command);
+  cmdsize = n + 1;
+  for (cl = cmdlist->next; cl; cl = cl->next)
+    cmdsize += STRLEN (cl->word->word) + 3;
+  cmdsize += 2;
+
+  /* allocate the string for the command and fill it in. */
+  cscmd = (char *)xmalloc (cmdsize + 1);
+
+  strcpy (cscmd, cs->command);			/* $0 */
+  cmdlen = n;
+  cscmd[cmdlen++] = ' ';
+  for (cl = cmdlist->next; cl; cl = cl->next)   /* $1, $2, $3, ... */
+    {
+      t = sh_single_quote (cl->word->word ? cl->word->word : "");
+      n = strlen (t);
+      RESIZE_MALLOCED_BUFFER (cscmd, cmdlen, n + 2, cmdsize, 64);
+      strcpy (cscmd + cmdlen, t);
+      cmdlen += n;
+      if (cl->next)
+	cscmd[cmdlen++] = ' ';
+      free (t);
+    }
+  cscmd[cmdlen] = '\0';
+
+  tw = command_substitute (cscmd, 0, 0);
+  csbuf = tw ? tw->word : (char *)NULL;
+  if (tw)
+    dispose_word_desc (tw);
+
+  /* Now clean up and destroy everything. */
+  dispose_words (cmdlist);
+  free (cscmd);
+  unbind_compfunc_variables (1);
+
+  if (csbuf == 0 || *csbuf == '\0')
+    {
+      FREE (csbuf);
+      return ((STRINGLIST *)NULL);
+    }
+
+  /* Now break CSBUF up at newlines, with backslash allowed to escape a
+     newline, and put the individual words into a STRINGLIST. */
+  sl = strlist_create (16);
+  for (ws = 0; csbuf[ws]; )
+    {
+      we = ws;
+      while (csbuf[we] && csbuf[we] != '\n')
+	{
+	  if (csbuf[we] == '\\' && csbuf[we+1] == '\n')
+	    we++;
+	  we++;
+	}
+      t = substring (csbuf, ws, we);
+      if (sl->list_len >= sl->list_size - 1)
+	strlist_resize (sl, sl->list_size + 16);
+      sl->list[sl->list_len++] = t;
+      while (csbuf[we] == '\n') we++;
+      ws = we;
+    }
+  sl->list[sl->list_len] = (char *)NULL;
+
+  free (csbuf);
+  return (sl);
+}
+
+static WORD_LIST *
+command_line_to_word_list (line, llen, sentinel, nwp, cwp)
+     char *line;
+     int llen, sentinel, *nwp, *cwp;
+{
+  WORD_LIST *ret;
+  char *delims;
+
+#if 0
+  delims = "()<>;&| \t\n";	/* shell metacharacters break words */
+#else
+  delims = rl_completer_word_break_characters;
+#endif
+  ret = split_at_delims (line, llen, delims, sentinel, SD_NOQUOTEDELIM|SD_COMPLETE, nwp, cwp);
+  return (ret);
+}
+
+/* Evaluate COMPSPEC *cs and return all matches for WORD. */
+
+STRINGLIST *
+gen_compspec_completions (cs, cmd, word, start, end, foundp)
+     COMPSPEC *cs;
+     const char *cmd;
+     const char *word;
+     int start, end;
+     int *foundp;
+{
+  STRINGLIST *ret, *tmatches;
+  char *line;
+  int llen, nw, cw, found, foundf;
+  WORD_LIST *lwords;
+  WORD_DESC *lw;
+  COMPSPEC *tcs;
+
+  found = 1;
+
+#ifdef DEBUG
+  debug_printf ("gen_compspec_completions (%s, %s, %d, %d)", cmd, word, start, end);
+  debug_printf ("gen_compspec_completions: %s -> %p", cmd, cs);
+#endif
+  ret = gen_action_completions (cs, word);
+#ifdef DEBUG
+  if (ret && progcomp_debug)
+    {
+      debug_printf ("gen_action_completions (%p, %s) -->", cs, word);
+      strlist_print (ret, "\t");
+      rl_on_new_line ();
+    }
+#endif
+
+  /* Now we start generating completions based on the other members of CS. */
+  if (cs->globpat)
+    {
+      tmatches = gen_globpat_matches (cs, word);
+      if (tmatches)
+	{
+#ifdef DEBUG
+	  if (progcomp_debug)
+	    {
+	      debug_printf ("gen_globpat_matches (%p, %s) -->", cs, word);
+	      strlist_print (tmatches, "\t");
+	      rl_on_new_line ();
+	    }
+#endif
+	  ret = strlist_append (ret, tmatches);
+	  strlist_dispose (tmatches);
+	  rl_filename_completion_desired = 1;
+	}
+    }
+
+  if (cs->words)
+    {
+      tmatches = gen_wordlist_matches (cs, word);
+      if (tmatches)
+	{
+#ifdef DEBUG
+	  if (progcomp_debug)
+	    {
+	      debug_printf ("gen_wordlist_matches (%p, %s) -->", cs, word);
+	      strlist_print (tmatches, "\t");
+	      rl_on_new_line ();
+	    }
+#endif
+	  ret = strlist_append (ret, tmatches);
+	  strlist_dispose (tmatches);
+	}
+    }
+
+  lwords = (WORD_LIST *)NULL;
+  line = (char *)NULL;
+  if (cs->command || cs->funcname)
+    {
+      /* If we have a command or function to execute, we need to first break
+	 the command line into individual words, find the number of words,
+	 and find the word in the list containing the word to be completed. */
+      line = substring (pcomp_line, start, end);
+      llen = end - start;
+
+#ifdef DEBUG
+      debug_printf ("command_line_to_word_list (%s, %d, %d, %p, %p)",
+		line, llen, pcomp_ind - start, &nw, &cw);
+#endif
+      lwords = command_line_to_word_list (line, llen, pcomp_ind - start, &nw, &cw);
+      /* If we skipped a NULL word at the beginning of the line, add it back */
+      if (lwords && lwords->word && cmd[0] == 0 && lwords->word->word[0] != 0)
+	{
+	  lw = make_bare_word (cmd);
+	  lwords = make_word_list (lw, lwords);
+	  nw++;
+	  cw++;
+	}
+#ifdef DEBUG
+      if (lwords == 0 && llen > 0)
+	debug_printf ("ERROR: command_line_to_word_list returns NULL");
+      else if (progcomp_debug)
+	{
+	  debug_printf ("command_line_to_word_list -->");
+	  printf ("\t");
+	  print_word_list (lwords, "!");
+	  printf ("\n");
+	  fflush(stdout);
+	  rl_on_new_line ();
+	}
+#endif
+    }
+
+  if (cs->funcname)
+    {
+      foundf = 0;
+      tmatches = gen_shell_function_matches (cs, cmd, word, line, pcomp_ind - start, lwords, nw, cw, &foundf);
+      if (foundf != 0)
+	found = foundf;
+      if (tmatches)
+	{
+#ifdef DEBUG
+	  if (progcomp_debug)
+	    {
+	      debug_printf ("gen_shell_function_matches (%p, %s, %s, %p, %d, %d) -->", cs, cmd, word, lwords, nw, cw);
+	      strlist_print (tmatches, "\t");
+	      rl_on_new_line ();
+	    }
+#endif
+	  ret = strlist_append (ret, tmatches);
+	  strlist_dispose (tmatches);
+	}
+    }
+
+  if (cs->command)
+    {
+      tmatches = gen_command_matches (cs, cmd, word, line, pcomp_ind - start, lwords, nw, cw);
+      if (tmatches)
+	{
+#ifdef DEBUG
+	  if (progcomp_debug)
+	    {
+	      debug_printf ("gen_command_matches (%p, %s, %s, %p, %d, %d) -->", cs, cmd, word, lwords, nw, cw);
+	      strlist_print (tmatches, "\t");
+	      rl_on_new_line ();
+	    }
+#endif
+	  ret = strlist_append (ret, tmatches);
+	  strlist_dispose (tmatches);
+	}
+    }
+
+  if (cs->command || cs->funcname)
+    {
+      if (lwords)
+	dispose_words (lwords);
+      FREE (line);
+    }
+
+  if (foundp)
+    *foundp = found;
+
+  if (found == 0 || (found & PCOMP_RETRYFAIL))
+    {
+      strlist_dispose (ret);
+      return NULL;
+    }
+
+  if (cs->filterpat)
+    {
+      tmatches = filter_stringlist (ret, cs->filterpat, word);
+#ifdef DEBUG
+      if (progcomp_debug)
+	{
+	  debug_printf ("filter_stringlist (%p, %s, %s) -->", ret, cs->filterpat, word);
+	  strlist_print (tmatches, "\t");
+	  rl_on_new_line ();
+	}
+#endif
+      if (ret && ret != tmatches)
+	{
+	  FREE (ret->list);
+	  free (ret);
+	}
+      ret = tmatches;
+    }
+
+  if (cs->prefix || cs->suffix)
+    ret = strlist_prefix_suffix (ret, cs->prefix, cs->suffix);
+
+  /* If no matches have been generated and the user has specified that
+      directory completion should be done as a default, call
+      gen_action_completions again to generate a list of matching directory
+      names. */
+  if ((ret == 0 || ret->list_len == 0) && (cs->options & COPT_DIRNAMES))
+    {
+      tcs = compspec_create ();
+      tcs->actions = CA_DIRECTORY;
+      FREE (ret);
+      ret = gen_action_completions (tcs, word);
+      compspec_dispose (tcs);
+    }
+  else if (cs->options & COPT_PLUSDIRS)
+    {
+      tcs = compspec_create ();
+      tcs->actions = CA_DIRECTORY;
+      tmatches = gen_action_completions (tcs, word);
+      ret = strlist_append (ret, tmatches);
+      strlist_dispose (tmatches);
+      compspec_dispose (tcs);
+    }
+
+  return (ret);
+}
+
+void
+pcomp_set_readline_variables (flags, nval)
+     int flags, nval;
+{
+  /* If the user specified that the compspec returns filenames, make
+     sure that readline knows it. */
+  if (flags & COPT_FILENAMES)
+    rl_filename_completion_desired = nval;
+  /* If the user doesn't want a space appended, tell readline. */
+  if (flags & COPT_NOSPACE)
+    rl_completion_suppress_append = nval;
+  /* The value here is inverted, since the default is on and the `noquote'
+     option is supposed to turn it off */
+  if (flags & COPT_NOQUOTE)
+    rl_filename_quoting_desired = 1 - nval;
+  if (flags & COPT_NOSORT)
+    rl_sort_completion_matches = 1 - nval;
+}
+
+/* Set or unset FLAGS in the options word of the current compspec.
+   SET_OR_UNSET is 1 for setting, 0 for unsetting. */
+void
+pcomp_set_compspec_options (cs, flags, set_or_unset)
+     COMPSPEC *cs;
+     int flags, set_or_unset;
+{
+  if (cs == 0 && ((cs = pcomp_curcs) == 0))
+    return;
+  if (set_or_unset)
+    cs->options |= flags;
+  else
+    cs->options &= ~flags;
+}
+
+static STRINGLIST *
+gen_progcomp_completions (ocmd, cmd, word, start, end, foundp, retryp, lastcs)
+     const char *ocmd;
+     const char *cmd;
+     const char *word;
+     int start, end;
+     int *foundp, *retryp;
+     COMPSPEC **lastcs;
+{
+  COMPSPEC *cs, *oldcs;
+  const char *oldcmd, *oldtxt;
+  STRINGLIST *ret;
+
+  cs = progcomp_search (ocmd);
+
+  if (cs == 0 || cs == *lastcs)
+    {
+#if 0
+      if (foundp)
+	*foundp = 0;
+#endif
+      return (NULL);
+    }
+
+  if (*lastcs)
+    compspec_dispose (*lastcs);
+  cs->refcount++;	/* XXX */
+  *lastcs = cs;
+
+  cs = compspec_copy (cs);
+
+  oldcs = pcomp_curcs;
+  oldcmd = pcomp_curcmd;
+  oldtxt = pcomp_curtxt;
+
+  pcomp_curcs = cs;
+  pcomp_curcmd = cmd;
+  pcomp_curtxt = word;
+
+  ret = gen_compspec_completions (cs, cmd, word, start, end, foundp);
+
+  pcomp_curcs = oldcs;
+  pcomp_curcmd = oldcmd;
+  pcomp_curtxt = oldtxt;
+
+  /* We need to conditionally handle setting *retryp here */
+  if (retryp)
+    *retryp = foundp && (*foundp & PCOMP_RETRYFAIL);    	
+
+  if (foundp)
+    {
+      *foundp &= ~PCOMP_RETRYFAIL;
+      *foundp |= cs->options;
+    }
+
+  compspec_dispose (cs);
+  return ret;  
+}
+
+/* The driver function for the programmable completion code.  Returns a list
+   of matches for WORD, which is an argument to command CMD.  START and END
+   bound the command currently being completed in pcomp_line (usually
+   rl_line_buffer). */
+char **
+programmable_completions (cmd, word, start, end, foundp)
+     const char *cmd;
+     const char *word;
+     int start, end, *foundp;
+{
+  COMPSPEC *lastcs;
+  STRINGLIST *ret;
+  char **rmatches, *t;
+  int found, retry, count;
+  char *ocmd;
+  int oend;
+#if defined (ALIAS)
+  alias_t *al;
+#endif
+
+  lastcs = 0;
+  found = count = 0;
+
+  pcomp_line = rl_line_buffer;
+  pcomp_ind = rl_point;
+
+  ocmd = (char *)cmd;
+  oend = end;
+
+  do
+    {
+      retry = 0;
+
+      /* We look at the basename of CMD if the full command does not have
+	 an associated COMPSPEC. */
+      ret = gen_progcomp_completions (ocmd, ocmd, word, start, oend, &found, &retry, &lastcs);
+      if (found == 0)
+	{
+	  t = strrchr (ocmd, '/');
+	  if (t && *(++t))
+	    ret = gen_progcomp_completions (t, ocmd, word, start, oend, &found, &retry, &lastcs);
+	}
+
+      if (found == 0)
+	ret = gen_progcomp_completions (DEFAULTCMD, ocmd, word, start, oend, &found, &retry, &lastcs);
+
+#if defined (ALIAS)
+      /* Look up any alias for CMD, try to gen completions for it */
+      /* Look up the alias, find the value, build a new line replacing CMD
+	 with that value, offsetting PCOMP_IND and END appropriately, reset
+	 PCOMP_LINE to the new line and OCMD with the new command name, then
+	 call gen_progcomp_completions again. We could use alias_expand for
+	 this, but it does more (and less) than we need right now. */
+      if (found == 0 && retry == 0 && progcomp_alias && (al = find_alias (ocmd)))
+	{
+	  char *ncmd, *nline, *ntxt;
+	  int ind, lendiff;
+	  size_t nlen, olen, llen;
+
+	  /* We found an alias for OCMD. Take the value and build a new line */
+	  ntxt = al->value;
+	  nlen = strlen (ntxt);
+	  if (nlen == 0)
+	    break;
+	  olen = strlen (ocmd);
+	  lendiff = nlen - olen;	/* can be negative */
+	  llen = strlen (pcomp_line);
+
+	  nline = (char *)xmalloc (llen + lendiff + 1);
+	  if (start > 0)
+	    strncpy (nline, pcomp_line, start);
+	  strncpy (nline + start, ntxt, nlen);
+	  strcpy (nline + start + nlen, pcomp_line + start + olen);
+
+	  /* Find the first word of the alias value and use that as OCMD. We
+	     don't check the alias value to see whether it begins with a valid
+	     command name, so this can be fooled. */
+	  ind = skip_to_delim (ntxt, 0, "()<>;&| \t\n", SD_NOJMP|SD_COMPLETE);
+	  if (ind > 0)
+	    ncmd = substring (ntxt, 0, ind);
+	  else
+	    {
+	      free (nline);
+	      break;		/* will free pcomp_line and ocmd later */
+	    }
+
+	  /* Adjust PCOMP_IND and OEND appropriately */
+	  pcomp_ind += lendiff;
+	  oend += lendiff;
+
+	  /* Set up values with new line. WORD stays the same. */
+	  if (ocmd != cmd)
+	    free (ocmd);
+	  if (pcomp_line != rl_line_buffer)
+	    free (pcomp_line);
+
+	  ocmd = ncmd;
+	  pcomp_line = nline;
+
+	  /* And go back and start over. */
+	  retry = 1;
+	}
+#endif /* ALIAS */
+
+      count++;
+
+      if (count > 32)
+	{
+	  internal_warning (_("programmable_completion: %s: possible retry loop"), cmd);
+	  break;
+	}
+    }
+  while (retry);
+
+  if (pcomp_line != rl_line_buffer)
+    free (pcomp_line);
+  if (ocmd != cmd)
+    free (ocmd);
+
+  if (ret)
+    {
+      rmatches = ret->list;
+      free (ret);
+    }
+  else
+    rmatches = (char **)NULL;
+
+  if (foundp)
+    *foundp = found;
+
+  if (lastcs)	/* XXX - should be while? */
+    compspec_dispose (lastcs);
+
+  /* XXX restore pcomp_line and pcomp_ind? */
+  pcomp_line = rl_line_buffer;
+  pcomp_ind = rl_point;
+
+  return (rmatches);
+}
+
+#endif /* PROGRAMMABLE_COMPLETION */
diff --git a/pcomplete.h b/pcomplete.h
new file mode 100644
index 0000000..2a68e6a
--- /dev/null
+++ b/pcomplete.h
@@ -0,0 +1,177 @@
+/* pcomplete.h - structure definitions and other stuff for programmable
+		 completion. */
+
+/* Copyright (C) 1999-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_PCOMPLETE_H_)
+#  define _PCOMPLETE_H_
+
+#include "stdc.h"
+#include "hashlib.h"
+
+typedef struct compspec {
+  int refcount;
+  unsigned long actions;
+  unsigned long options;
+  char *globpat;
+  char *words;
+  char *prefix;
+  char *suffix;
+  char *funcname;
+  char *command;
+  char *lcommand;
+  char *filterpat;
+} COMPSPEC;
+
+/* Values for COMPSPEC actions.  These are things the shell knows how to
+   build internally. */
+#define CA_ALIAS	(1<<0)
+#define CA_ARRAYVAR	(1<<1)
+#define CA_BINDING	(1<<2)
+#define CA_BUILTIN	(1<<3)
+#define CA_COMMAND	(1<<4)
+#define CA_DIRECTORY	(1<<5)
+#define CA_DISABLED	(1<<6)
+#define CA_ENABLED	(1<<7)
+#define CA_EXPORT	(1<<8)
+#define CA_FILE		(1<<9)
+#define CA_FUNCTION	(1<<10)
+#define CA_GROUP	(1<<11)
+#define CA_HELPTOPIC	(1<<12)
+#define CA_HOSTNAME	(1<<13)
+#define CA_JOB		(1<<14)
+#define CA_KEYWORD	(1<<15)
+#define CA_RUNNING	(1<<16)
+#define CA_SERVICE	(1<<17)
+#define CA_SETOPT	(1<<18)
+#define CA_SHOPT	(1<<19)
+#define CA_SIGNAL	(1<<20)
+#define CA_STOPPED	(1<<21)
+#define CA_USER		(1<<22)
+#define CA_VARIABLE	(1<<23)
+
+/* Values for COMPSPEC options field. */
+#define COPT_RESERVED	(1<<0)		/* reserved for other use */
+#define COPT_DEFAULT	(1<<1)
+#define COPT_FILENAMES	(1<<2)
+#define COPT_DIRNAMES	(1<<3)
+#define COPT_NOQUOTE	(1<<4)
+#define COPT_NOSPACE	(1<<5)
+#define COPT_BASHDEFAULT (1<<6)
+#define COPT_PLUSDIRS	(1<<7)
+#define COPT_NOSORT	(1<<8)
+
+#define COPT_LASTUSER	COPT_NOSORT
+
+#define PCOMP_RETRYFAIL (COPT_LASTUSER << 1)
+#define PCOMP_NOTFOUND	(COPT_LASTUSER << 2)
+
+
+/* List of items is used by the code that implements the programmable
+   completions. */
+typedef struct _list_of_items {
+  int flags;
+  int (*list_getter) PARAMS((struct _list_of_items *));	/* function to call to get the list */
+
+  STRINGLIST *slist;
+
+  /* These may or may not be used. */
+  STRINGLIST *genlist;	/* for handing to the completion code one item at a time */
+  int genindex;		/* index of item last handed to completion code */
+
+} ITEMLIST;
+
+/* Values for ITEMLIST -> flags */
+#define LIST_DYNAMIC		0x001
+#define LIST_DIRTY		0x002
+#define LIST_INITIALIZED	0x004
+#define LIST_MUSTSORT		0x008
+#define LIST_DONTFREE		0x010
+#define LIST_DONTFREEMEMBERS	0x020
+
+#define EMPTYCMD	"_EmptycmD_"
+#define DEFAULTCMD	"_DefaultCmD_"
+#define INITIALWORD	"_InitialWorD_"
+
+extern HASH_TABLE *prog_completes;
+
+extern char *pcomp_line;
+extern int pcomp_ind;
+
+extern int prog_completion_enabled;
+extern int progcomp_alias;
+
+/* Not all of these are used yet. */
+extern ITEMLIST it_aliases;
+extern ITEMLIST it_arrayvars;
+extern ITEMLIST it_bindings;
+extern ITEMLIST it_builtins;
+extern ITEMLIST it_commands;
+extern ITEMLIST it_directories;
+extern ITEMLIST it_disabled;
+extern ITEMLIST it_enabled;
+extern ITEMLIST it_exports;
+extern ITEMLIST it_files;
+extern ITEMLIST it_functions;
+extern ITEMLIST it_groups;
+extern ITEMLIST it_helptopics;
+extern ITEMLIST it_hostnames;
+extern ITEMLIST it_jobs;
+extern ITEMLIST it_keywords;
+extern ITEMLIST it_running;
+extern ITEMLIST it_services;
+extern ITEMLIST it_setopts;
+extern ITEMLIST it_shopts;
+extern ITEMLIST it_signals;
+extern ITEMLIST it_stopped;
+extern ITEMLIST it_users;
+extern ITEMLIST it_variables;
+
+extern COMPSPEC *pcomp_curcs;
+extern const char *pcomp_curcmd;
+
+/* Functions from pcomplib.c */
+extern COMPSPEC *compspec_create PARAMS((void));
+extern void compspec_dispose PARAMS((COMPSPEC *));
+extern COMPSPEC *compspec_copy PARAMS((COMPSPEC *));
+
+extern void progcomp_create PARAMS((void));
+extern void progcomp_flush PARAMS((void));
+extern void progcomp_dispose PARAMS((void));
+
+extern int progcomp_size PARAMS((void));
+
+extern int progcomp_insert PARAMS((char *, COMPSPEC *));
+extern int progcomp_remove PARAMS((char *));
+
+extern COMPSPEC *progcomp_search PARAMS((const char *));
+
+extern void progcomp_walk PARAMS((hash_wfunc *));
+
+/* Functions from pcomplete.c */
+extern void set_itemlist_dirty PARAMS((ITEMLIST *));
+
+extern STRINGLIST *completions_to_stringlist PARAMS((char **));
+
+extern STRINGLIST *gen_compspec_completions PARAMS((COMPSPEC *, const char *, const char *, int, int, int *));
+extern char **programmable_completions PARAMS((const char *, const char *, int, int, int *));
+
+extern void pcomp_set_readline_variables PARAMS((int, int));
+extern void pcomp_set_compspec_options PARAMS((COMPSPEC *, int, int));
+#endif /* _PCOMPLETE_H_ */
diff --git a/pcomplib.c b/pcomplib.c
new file mode 100644
index 0000000..075fce7
--- /dev/null
+++ b/pcomplib.c
@@ -0,0 +1,228 @@
+/* pcomplib.c - library functions for programmable completion. */
+
+/* Copyright (C) 1999-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#if defined (PROGRAMMABLE_COMPLETION)
+
+#include "bashansi.h"
+#include <stdio.h>
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include "bashintl.h"
+
+#include "shell.h"
+#include "pcomplete.h"
+
+#define COMPLETE_HASH_BUCKETS	256	/* must be power of two */
+
+#define STRDUP(x)	((x) ? savestring (x) : (char *)NULL)
+
+HASH_TABLE *prog_completes = (HASH_TABLE *)NULL;
+
+static void free_progcomp PARAMS((PTR_T));
+
+COMPSPEC *
+compspec_create ()
+{
+  COMPSPEC *ret;
+
+  ret = (COMPSPEC *)xmalloc (sizeof (COMPSPEC));
+  ret->refcount = 0;
+
+  ret->actions = (unsigned long)0;
+  ret->options = (unsigned long)0;
+
+  ret->globpat = (char *)NULL;
+  ret->words = (char *)NULL;
+  ret->prefix = (char *)NULL;
+  ret->suffix = (char *)NULL;
+  ret->funcname = (char *)NULL;
+  ret->command = (char *)NULL;
+  ret->lcommand = (char *)NULL;
+  ret->filterpat = (char *)NULL;
+
+  return ret;
+}
+
+void
+compspec_dispose (cs)
+     COMPSPEC *cs;
+{
+  cs->refcount--;
+  if (cs->refcount == 0)
+    {
+      FREE (cs->globpat);
+      FREE (cs->words);
+      FREE (cs->prefix);
+      FREE (cs->suffix);
+      FREE (cs->funcname);
+      FREE (cs->command);
+      FREE (cs->lcommand);
+      FREE (cs->filterpat);
+
+      free (cs);
+    }
+}
+
+COMPSPEC *
+compspec_copy (cs)
+     COMPSPEC *cs;
+{
+  COMPSPEC *new;
+
+  new = (COMPSPEC *)xmalloc (sizeof (COMPSPEC));
+
+  new->refcount = 1; 	/* was cs->refcount, but this is a fresh copy */
+  new->actions = cs->actions;
+  new->options = cs->options;
+
+  new->globpat = STRDUP (cs->globpat);
+  new->words = STRDUP (cs->words);
+  new->prefix = STRDUP (cs->prefix);
+  new->suffix = STRDUP (cs->suffix);
+  new->funcname = STRDUP (cs->funcname);
+  new->command = STRDUP (cs->command);
+  new->lcommand = STRDUP (cs->lcommand);
+  new->filterpat = STRDUP (cs->filterpat);
+
+  return new;
+}
+
+void
+progcomp_create ()
+{
+  if (prog_completes == 0)
+    prog_completes = hash_create (COMPLETE_HASH_BUCKETS);
+}
+
+int
+progcomp_size ()
+{
+  return (HASH_ENTRIES (prog_completes));
+}
+
+static void
+free_progcomp (data)
+     PTR_T data;
+{
+  COMPSPEC *cs;
+
+  cs = (COMPSPEC *)data;
+  compspec_dispose (cs);
+}
+  
+void
+progcomp_flush ()
+{
+  if (prog_completes)
+    hash_flush (prog_completes, free_progcomp);
+}
+
+void
+progcomp_dispose ()
+{
+  if (prog_completes)
+    hash_dispose (prog_completes);
+  prog_completes = (HASH_TABLE *)NULL;
+}
+
+int
+progcomp_remove (cmd)
+     char *cmd;
+{
+  register BUCKET_CONTENTS *item;
+
+  if (prog_completes == 0)
+    return 1;
+
+  item = hash_remove (cmd, prog_completes, 0);
+  if (item)
+    {
+      if (item->data)
+	free_progcomp (item->data);
+      free (item->key);
+      free (item);
+      return (1);
+    }
+  return (0);
+}
+
+int
+progcomp_insert (cmd, cs)
+      char *cmd;
+      COMPSPEC *cs;
+{
+  register BUCKET_CONTENTS *item;
+
+  if (cs == NULL)
+    programming_error (_("progcomp_insert: %s: NULL COMPSPEC"), cmd);
+
+  if (prog_completes == 0)
+    progcomp_create ();
+
+  cs->refcount++;
+  item = hash_insert (cmd, prog_completes, 0);
+  if (item->data)
+    free_progcomp (item->data);
+  else
+    item->key = savestring (cmd);
+  item->data = cs;
+
+  return 1;
+}
+
+COMPSPEC *
+progcomp_search (cmd)
+     const char *cmd;
+{
+  register BUCKET_CONTENTS *item;
+  COMPSPEC *cs;
+
+  if (prog_completes == 0)
+    return ((COMPSPEC *)NULL);
+
+  item = hash_search (cmd, prog_completes, 0);
+
+  if (item == NULL)
+    return ((COMPSPEC *)NULL);
+
+  cs = (COMPSPEC *)item->data;
+
+  return (cs);
+}
+
+void
+progcomp_walk (pfunc)
+     hash_wfunc *pfunc;
+{
+  if (prog_completes == 0 || pfunc == 0 || HASH_ENTRIES (prog_completes) == 0)
+    return;
+
+  hash_walk (prog_completes, pfunc);
+}
+
+#endif /* PROGRAMMABLE_COMPLETION */
diff --git a/po/LINGUAS b/po/LINGUAS
new file mode 100644
index 0000000..27165b3
--- /dev/null
+++ b/po/LINGUAS
@@ -0,0 +1,2 @@
+# Set of available languages.
+en@quot en@boldquot af bg ca cs da de el eo es et fi fr ga gl hr hu id it ja ko lt nb nl pl pt pt_BR ro ru sk sl sr sv tr uk vi zh_CN zh_TW
diff --git a/po/Makefile.in.in b/po/Makefile.in.in
new file mode 100644
index 0000000..6f0abed
--- /dev/null
+++ b/po/Makefile.in.in
@@ -0,0 +1,359 @@
+# Makefile for PO directory in any package using GNU gettext.
+# Copyright (C) 1995-1997, 2000-2003 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
+#
+# This file can be copied and used freely without restrictions.  It can
+# be used in projects which are not available under the GNU General Public
+# License but which still want to provide support for the GNU gettext
+# functionality.
+# Please note that the actual code of GNU gettext is covered by the GNU
+# General Public License and is *not* in the public domain.
+
+PACKAGE = @PACKAGE_NAME@
+VERSION = @PACKAGE_VERSION@
+
+SHELL = /bin/sh
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+
+topdir = @top_srcdir@
+BUILD_DIR = @BUILD_DIR@
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+datarootdir = @datarootdir@
+datadir = @datadir@
+localedir = @localedir@
+
+gettextsrcdir = $(datadir)/gettext/po
+
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+MKINSTALLDIRS = $(top_srcdir)/support/mkinstalldirs
+mkinstalldirs = $(SHELL) $(MKINSTALLDIRS)
+
+GMSGFMT = @GMSGFMT@
+MSGFMT = @MSGFMT@
+XGETTEXT = @XGETTEXT@
+MSGMERGE = msgmerge
+MSGMERGE_UPDATE = @MSGMERGE@ --update
+MSGINIT = msginit
+MSGCONV = msgconv
+MSGFILTER = msgfilter
+
+POFILES = @POFILES@
+GMOFILES = @GMOFILES@
+UPDATEPOFILES = @UPDATEPOFILES@
+DUMMYPOFILES = @DUMMYPOFILES@
+DISTFILES.common = Makefile.in.in remove-potcdate.sin \
+$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
+DISTFILES = $(DISTFILES.common) Makevars POTFILES.in $(DOMAIN).pot stamp-po \
+$(POFILES) $(GMOFILES) \
+$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
+
+POTFILES = \
+
+CATALOGS = @CATALOGS@
+
+# Makevars gets inserted here. (Don't remove this line!)
+
+.SUFFIXES:
+.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-update
+
+.po.mo:
+	@echo "$(MSGFMT) -c -o $@ $<"; \
+	$(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
+
+.po.gmo:
+	@lang=`echo $* | sed -e 's,.*/,,'`; \
+	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \
+	cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
+
+.sin.sed:
+	sed -e '/^#/d' $< > t-$@
+	mv t-$@ $@
+
+
+all: all-@USE_NLS@
+
+all-yes: stamp-po
+all-no:
+
+# stamp-po is a timestamp denoting the last time at which the CATALOGS have
+# been loosely updated. Its purpose is that when a developer or translator
+# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
+# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent
+# invocations of "make" will do nothing. This timestamp would not be necessary
+# if updating the $(CATALOGS) would always touch them; however, the rule for
+# $(POFILES) has been designed to not touch files that don't need to be
+# changed.
+stamp-po: $(srcdir)/$(DOMAIN).pot
+	test -z "$(CATALOGS)" || $(MAKE) $(CATALOGS)
+	@echo "touch stamp-po"
+	@echo timestamp > stamp-poT
+	@mv stamp-poT stamp-po
+
+# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
+# otherwise packages like GCC can not be built if only parts of the source
+# have been downloaded.
+
+# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
+# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
+$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
+	$(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+	  --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \
+	  --files-from=$(srcdir)/POTFILES.in \
+	  --copyright-holder='$(COPYRIGHT_HOLDER)'
+	$(MAKE) $(MFLAGS) builtins.pot-update
+	test ! -f $(DOMAIN).po || { \
+	  if test -f $(srcdir)/$(DOMAIN).pot; then \
+	    sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
+	    sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
+	    if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
+	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
+	    else \
+	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
+	      mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+	    fi; \
+	  else \
+	    mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+	  fi; \
+	}
+
+# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
+# every "make" invocation, only create it when it is missing.
+# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
+$(srcdir)/$(DOMAIN).pot:
+	$(MAKE) $(DOMAIN).pot-update
+
+# This target rebuilds a PO file if $(DOMAIN).pot has changed.
+# Note that a PO file is not touched if it doesn't need to be changed.
+$(POFILES): $(srcdir)/$(DOMAIN).pot
+	@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
+	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \
+	cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot
+
+
+install: install-exec install-data
+install-exec:
+install-data: install-data-@USE_NLS@
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
+	  for file in $(DISTFILES.common) Makevars.template; do \
+	    $(INSTALL_DATA) $(srcdir)/$$file \
+			    $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	  for file in Makevars; do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	else \
+	  : ; \
+	fi
+install-data-no: all
+install-data-yes: all
+	$(mkinstalldirs) $(DESTDIR)$(datadir)
+	@catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  dir=$(localedir)/$$lang/LC_MESSAGES; \
+	  $(mkinstalldirs) $(DESTDIR)$$dir; \
+	  if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
+	  $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
+	  echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
+	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+	    if test -n "$$lc"; then \
+	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+	         for file in *; do \
+	           if test -f $$file; then \
+	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+	           fi; \
+	         done); \
+	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	      else \
+	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+	          :; \
+	        else \
+	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        fi; \
+	      fi; \
+	      rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	      ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+	      ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+	      cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	      echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
+	    fi; \
+	  done; \
+	done
+
+install-strip: install
+
+installdirs: installdirs-exec installdirs-data
+installdirs-exec:
+installdirs-data: installdirs-data-@USE_NLS@
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
+	else \
+	  : ; \
+	fi
+installdirs-data-no:
+installdirs-data-yes:
+	$(mkinstalldirs) $(DESTDIR)$(datadir)
+	@catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  dir=$(localedir)/$$lang/LC_MESSAGES; \
+	  $(mkinstalldirs) $(DESTDIR)$$dir; \
+	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+	    if test -n "$$lc"; then \
+	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+	         for file in *; do \
+	           if test -f $$file; then \
+	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+	           fi; \
+	         done); \
+	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	      else \
+	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+	          :; \
+	        else \
+	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        fi; \
+	      fi; \
+	    fi; \
+	  done; \
+	done
+
+# Define this as empty until I found a useful application.
+installcheck:
+
+uninstall: uninstall-exec uninstall-data
+uninstall-exec:
+uninstall-data: uninstall-data-@USE_NLS@
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  for file in $(DISTFILES.common) Makevars.template; do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	else \
+	  : ; \
+	fi
+uninstall-data-no:
+uninstall-data-yes:
+	catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
+	    rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	  done; \
+	done
+
+check: all
+
+info dvi ps pdf html tags TAGS ctags CTAGS ID:
+
+mostlyclean:
+	rm -f remove-potcdate.sed
+	rm -f stamp-poT
+	rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
+	rm -fr *.o
+
+clean: mostlyclean
+
+distclean: clean
+	rm -f Makefile Makefile.in POTFILES *.mo stamp-po
+
+maintainer-clean: distclean
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+	rm -f stamp-po $(GMOFILES)
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+dist distdir:
+	$(MAKE) update-po
+	@$(MAKE) dist2
+# This is a separate target because 'update-po' must be executed before.
+dist2: $(DISTFILES)
+	dists="$(DISTFILES)"; \
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  dists="$$dists Makevars.template"; \
+	fi; \
+	if test -f $(srcdir)/ChangeLog; then \
+	  dists="$$dists ChangeLog"; \
+	fi; \
+	for i in 0 1 2 3 4 5 6 7 8 9; do \
+	  if test -f $(srcdir)/ChangeLog.$$i; then \
+	    dists="$$dists ChangeLog.$$i"; \
+	  fi; \
+	done; \
+	if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
+	for file in $$dists; do \
+	  if test -f $$file; then \
+	    cp -p $$file $(distdir); \
+	  else \
+	    cp -p $(srcdir)/$$file $(distdir); \
+	  fi; \
+	done
+
+update-po: Makefile
+	$(MAKE) $(DOMAIN).pot-update
+	test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
+	$(MAKE) update-gmo
+
+# General rule for updating PO files.
+
+.nop.po-update:
+	@lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
+	if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \
+	tmpdir=`pwd`; \
+	echo "$$lang:"; \
+	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
+	cd $(srcdir); \
+	if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \
+	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+	    rm -f $$tmpdir/$$lang.new.po; \
+	  else \
+	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+	      :; \
+	    else \
+	      echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+	      exit 1; \
+	    fi; \
+	  fi; \
+	else \
+	  echo "msgmerge for $$lang.po failed!" 1>&2; \
+	  rm -f $$tmpdir/$$lang.new.po; \
+	fi
+
+$(DUMMYPOFILES):
+
+update-gmo: Makefile $(GMOFILES)
+	@:
+
+Makefile: Makefile.in.in $(top_builddir)/config.status @POMAKEFILEDEPS@ $(srcdir)/Rules-builtins
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$(subdir)/$@.in CONFIG_HEADERS= \
+	       $(SHELL) ./config.status
+
+force:
+
+# Tell versions [3.59,3.63) of GNU make not to export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/po/Makevars b/po/Makevars
new file mode 100644
index 0000000..84b2d95
--- /dev/null
+++ b/po/Makevars
@@ -0,0 +1,41 @@
+# Makefile variables for PO directory in any package using GNU gettext.
+
+# Usually the message domain is the same as the package name.
+DOMAIN = $(PACKAGE)
+
+# These two variables depend on the location of this directory.
+subdir = po
+top_builddir = $(BUILD_DIR)
+
+# These options get passed to xgettext.
+XGETTEXT_OPTIONS = --keyword=_ --keyword=N_ -C
+
+# This is the copyright holder that gets inserted into the header of the
+# $(DOMAIN).pot file.  Set this to the copyright holder of the surrounding
+# package.  (Note that the msgstr strings, extracted from the package's
+# sources, belong to the copyright holder of the package.)  Translators are
+# expected to transfer the copyright for their translations to this person
+# or entity, or to disclaim their copyright.  The empty string stands for
+# the public domain; in this case the translators are expected to disclaim
+# their copyright.
+COPYRIGHT_HOLDER = Free Software Foundation, Inc.
+
+# This is the email address or URL to which the translators shall report
+# bugs in the untranslated strings:
+# - Strings which are not entire sentences, see the maintainer guidelines
+#   in the GNU gettext documentation, section 'Preparing Strings'.
+# - Strings which use unclear terms or require additional context to be
+#   understood.
+# - Strings which make invalid assumptions about notation of date, time or
+#   money.
+# - Pluralisation problems.
+# - Incorrect English spelling.
+# - Incorrect formatting.
+# It can be your email address, or a mailing list address where translators
+# can write to without being subscribed, or the URL of a web page through
+# which the translators can contact you.
+MSGID_BUGS_ADDRESS = bug-bash@gnu.org
+
+# This is the list of locale categories, beyond LC_MESSAGES, for which the
+# message catalogs shall be used.  It is usually empty.
+EXTRA_LOCALE_CATEGORIES =
diff --git a/po/POTFILES.in b/po/POTFILES.in
new file mode 100644
index 0000000..2a8f369
--- /dev/null
+++ b/po/POTFILES.in
@@ -0,0 +1,81 @@
+# List of source files containing translatable strings.
+# Copyright (C) 2004 Free Software Foundation, Inc.
+
+arrayfunc.c
+bashhist.c
+bashline.c
+braces.c
+builtins/alias.def
+builtins/bind.def
+builtins/break.def
+builtins/caller.def
+builtins/cd.def
+builtins/common.c
+builtins/complete.def
+builtins/declare.def
+builtins/enable.def
+builtins/evalfile.c
+builtins/exec.def
+builtins/exit.def
+builtins/fc.def
+builtins/fg_bg.def
+builtins/getopt.c
+builtins/hash.def
+builtins/help.def
+builtins/history.def
+builtins/inlib.def
+builtins/jobs.def
+builtins/kill.def
+builtins/let.def
+builtins/mapfile.def
+builtins/mkbuiltins.c
+builtins/printf.def
+builtins/pushd.def
+builtins/read.def
+builtins/return.def
+builtins/set.def
+builtins/setattr.def
+builtins/shift.def
+builtins/shopt.def
+builtins/source.def
+builtins/suspend.def
+builtins/type.def
+builtins/ulimit.def
+builtins/umask.def
+error.c
+eval.c
+execute_cmd.c
+expr.c
+general.c
+input.c
+jobs.c
+lib/intl/os2compat.c
+lib/malloc/malloc.c
+lib/malloc/stats.c
+lib/malloc/table.c
+lib/malloc/watch.c
+lib/sh/fmtulong.c
+lib/sh/netopen.c
+locale.c
+mailcheck.c
+make_cmd.c
+nojobs.c
+parse.y
+pcomplete.c
+pcomplib.c
+print_cmd.c
+redir.c
+shell.c
+sig.c
+siglist.c
+subst.c
+test.c
+trap.c
+variables.c
+version.c
+version2.c
+xmalloc.c
+
+# Apparently gettext's defaults cannot handle files that exist outside of the
+# source directory, like in the build directory
+#../builtins/builtins.c
diff --git a/po/README b/po/README
new file mode 100644
index 0000000..979884c
--- /dev/null
+++ b/po/README
@@ -0,0 +1 @@
+This apparently requires GNU sed
diff --git a/po/Rules-builtins b/po/Rules-builtins
new file mode 100644
index 0000000..57df81c
--- /dev/null
+++ b/po/Rules-builtins
@@ -0,0 +1,19 @@
+#
+# Update the strings from the builtins' long docs.  Must be called when
+# bash.pot exists, in the middle of the bash.pot-update recipe
+#
+builtins.pot-update:	$(top_builddir)/builtins/builtins.c
+	$(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_builddir)/builtins \
+		$(XGETTEXT_OPTIONS) --omit-header \
+	  --copyright-holder='$(COPYRIGHT_HOLDER)' \
+	  --join-existing \
+	  builtins.c
+
+# This rule has no dependencies: we don't need to update builtins.pot at
+# every "make" invocation, only create it when it is missing.
+# Only "make builtins.pot-update" or "make dist" will force an update.
+$(srcdir)/builtins.pot:
+	$(MAKE) builtins.pot-update
+
+xdist:
+	$(MAKE) update-po
diff --git a/po/Rules-quot b/po/Rules-quot
new file mode 100644
index 0000000..5f46d23
--- /dev/null
+++ b/po/Rules-quot
@@ -0,0 +1,42 @@
+# Special Makefile rules for English message catalogs with quotation marks.
+
+DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot
+
+.SUFFIXES: .insert-header .po-update-en
+
+en@quot.po-update: en@quot.po-update-en
+en@boldquot.po-update: en@boldquot.po-update-en
+
+.insert-header.po-update-en:
+	@lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
+	if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
+	tmpdir=`pwd`; \
+	echo "$$lang:"; \
+	ll=`echo $$lang | sed -e 's/@.*//'`; \
+	LC_ALL=C; export LC_ALL; \
+	cd $(srcdir); \
+	if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$ll -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \
+	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+	    rm -f $$tmpdir/$$lang.new.po; \
+	  else \
+	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+	      :; \
+	    else \
+	      echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+	      exit 1; \
+	    fi; \
+	  fi; \
+	else \
+	  echo "creation of $$lang.po failed!" 1>&2; \
+	  rm -f $$tmpdir/$$lang.new.po; \
+	fi
+
+en@quot.insert-header: insert-header.sin
+	sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header
+
+en@boldquot.insert-header: insert-header.sin
+	sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header
+
+mostlyclean: mostlyclean-quot
+mostlyclean-quot:
+	rm -f *.insert-header
diff --git a/po/af.gmo b/po/af.gmo
new file mode 100644
index 0000000..28fbbfb
--- /dev/null
+++ b/po/af.gmo
diff --git a/po/af.po b/po/af.po
new file mode 100644
index 0000000..c350681
--- /dev/null
+++ b/po/af.po
@@ -0,0 +1,4909 @@
+# bash
+# Copyright (C) 2004 Free Software Foundation, Inc.
+# Petri Jooste <rkwjpj@puk.ac.za>, 2004.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: bash 2.0\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2004-03-17 13:48+0200\n"
+"Last-Translator: Petri Jooste <rkwjpj@puk.ac.za>\n"
+"Language-Team: Afrikaans <i18n@af.org.za>\n"
+"Language: af\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-1\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+
+#: arrayfunc.c:66
+#, fuzzy
+msgid "bad array subscript"
+msgstr "Os/2 Biskaart Skikking"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr ""
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr ""
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr ""
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr ""
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr ""
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: kan nie %s skep nie"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr ""
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr ""
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr ""
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr ""
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "%s: bevel nie gevind nie"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr ""
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr ""
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr ""
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr ""
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr ""
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr ""
+
+#: builtins/bind.def:252
+#, fuzzy, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: kan nie %s skep nie"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, fuzzy, c-format
+msgid "`%s': unknown function name"
+msgstr "%s: leesalleen-funksie"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr ""
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr ""
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, fuzzy, c-format
+msgid "`%s': cannot unbind"
+msgstr "%s: bevel nie gevind nie"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr ""
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr ""
+
+#: builtins/caller.def:136
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr ""
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+#, fuzzy
+msgid "too many arguments"
+msgstr "te veel parameters"
+
+#: builtins/cd.def:342
+#, fuzzy
+msgid "null directory"
+msgstr "boonste lêergids."
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr ""
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr ""
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr ""
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr ""
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, fuzzy, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: option `%s' requires an argument\n"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr ""
+
+#: builtins/common.c:207
+#, fuzzy, c-format
+msgid "%s: not found"
+msgstr "%s: bevel nie gevind nie"
+
+#: builtins/common.c:216 shell.c:857
+#, fuzzy, c-format
+msgid "%s: invalid option"
+msgstr "%s: illegal option -- %c\n"
+
+#: builtins/common.c:223
+#, fuzzy, c-format
+msgid "%s: invalid option name"
+msgstr "%s: illegal option -- %c\n"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, fuzzy, c-format
+msgid "`%s': not a valid identifier"
+msgstr "Die datum is nie geldige!"
+
+#: builtins/common.c:240
+#, fuzzy
+msgid "invalid octal number"
+msgstr "Die sein nommer wat was gevang het"
+
+#: builtins/common.c:242
+#, fuzzy
+msgid "invalid hex number"
+msgstr "Die sein nommer wat was gevang het"
+
+#: builtins/common.c:244 expr.c:1569
+#, fuzzy
+msgid "invalid number"
+msgstr "Die sein nommer wat was gevang het"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr ""
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr ""
+
+#: builtins/common.c:266 error.c:510
+#, fuzzy, c-format
+msgid "%s: readonly variable"
+msgstr "Veranderlike boom"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr ""
+
+#: builtins/common.c:274 builtins/common.c:276
+#, fuzzy
+msgid "argument"
+msgstr "argument verwag\n"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr ""
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr ""
+
+#: builtins/common.c:292
+#, fuzzy, c-format
+msgid "%s: no job control"
+msgstr "geen taakbeheer in hierdie dop nie"
+
+#: builtins/common.c:294
+#, fuzzy
+msgid "no job control"
+msgstr "geen taakbeheer in hierdie dop nie"
+
+#: builtins/common.c:304
+#, fuzzy, c-format
+msgid "%s: restricted"
+msgstr "Die bediener beëindig Die verbinding."
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr ""
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr ""
+
+#: builtins/common.c:323
+#, fuzzy, c-format
+msgid "write error: %s"
+msgstr "pypfout: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr ""
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr ""
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr ""
+
+#: builtins/common.c:701 builtins/common.c:703
+#, fuzzy, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: dubbelsinnige herroetering"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr ""
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, fuzzy, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: kan nie %s skep nie"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, fuzzy, c-format
+msgid "%s: cannot unset"
+msgstr "%s: kan nie %s skep nie"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr ""
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr ""
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr ""
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr ""
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr ""
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr ""
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr ""
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr ""
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr ""
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr ""
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr ""
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: leesalleen-funksie"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr ""
+
+#: builtins/declare.def:838
+#, fuzzy, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "Kan nie soek 'n handtekening in hierdie boodskap!"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr ""
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr ""
+
+#: builtins/enable.def:343
+#, fuzzy, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "Kan nie oopmaak vir skrip-afvoer nie: \""
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr ""
+
+#: builtins/enable.def:388
+#, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr ""
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr ""
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr ""
+
+#: builtins/enable.def:543
+#, fuzzy, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: kan nie %s skep nie"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: is 'n gids"
+
+#: builtins/evalfile.c:144
+#, fuzzy, c-format
+msgid "%s: not a regular file"
+msgstr "%s: kan nie 'n binêre lêer uitvoer nie"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr ""
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: kan nie 'n binêre lêer uitvoer nie"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, fuzzy, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: kan nie %s skep nie"
+
+#: builtins/exit.def:64
+#, fuzzy, c-format
+msgid "logout\n"
+msgstr "Afteken"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr ""
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr ""
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr ""
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+#, fuzzy
+msgid "no command found"
+msgstr "%s: bevel nie gevind nie"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr ""
+
+#: builtins/fc.def:444
+#, fuzzy, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: kan nie %s skep nie"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr ""
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr ""
+
+#: builtins/getopt.c:110
+#, fuzzy, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: illegal option -- %c\n"
+
+#: builtins/getopt.c:111
+#, fuzzy, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: option `%s' requires an argument\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr ""
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr ""
+
+#: builtins/hash.def:267
+#, fuzzy, c-format
+msgid "hits\tcommand\n"
+msgstr "Bevelreël"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] ""
+msgstr[1] ""
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+
+#: builtins/help.def:224
+#, fuzzy, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: kan nie %s skep nie"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr ""
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr ""
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr ""
+
+#: builtins/history.def:451
+#, fuzzy, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: heelgetal-uitdrukking is verwag\n"
+
+#: builtins/inlib.def:71
+#, fuzzy, c-format
+msgid "%s: inlib failed"
+msgstr "Veranderlike boom"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr ""
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr ""
+
+#: builtins/kill.def:274
+#, fuzzy
+msgid "Unknown error"
+msgstr "Onbekende fout %d"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+#, fuzzy
+msgid "expression expected"
+msgstr "Bools uitdrukking verwag"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr ""
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr ""
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr ""
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr ""
+
+#: builtins/mapfile.def:299
+#, fuzzy, c-format
+msgid "%s: invalid array origin"
+msgstr "Os/2 Biskaart Skikking"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr ""
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr ""
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr ""
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr ""
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr ""
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr ""
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr ""
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr ""
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr ""
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr ""
+
+#: builtins/pushd.def:199
+#, fuzzy
+msgid "no other directory"
+msgstr "boonste lêergids."
+
+#: builtins/pushd.def:360
+#, fuzzy, c-format
+msgid "%s: invalid argument"
+msgstr "%s: option `%s' requires an argument\n"
+
+#: builtins/pushd.def:480
+#, fuzzy
+msgid "<no current directory>"
+msgstr "Nuutste gebruik word werksaam gids"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr ""
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr ""
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr ""
+
+#: builtins/read.def:755
+#, fuzzy, c-format
+msgid "read error: %d: %s"
+msgstr "pypfout: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr ""
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr ""
+
+#: builtins/set.def:966
+#, fuzzy, c-format
+msgid "%s: not an array variable"
+msgstr "Veranderlike boom"
+
+#: builtins/setattr.def:189
+#, fuzzy, c-format
+msgid "%s: not a function"
+msgstr "%s: leesalleen-funksie"
+
+#: builtins/setattr.def:194
+#, fuzzy, c-format
+msgid "%s: cannot export"
+msgstr "%s: kan nie %s skep nie"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+#, fuzzy
+msgid "shift count"
+msgstr "Shift"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr ""
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr ""
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr ""
+
+#: builtins/source.def:154
+#, fuzzy, c-format
+msgid "%s: file not found"
+msgstr "%s: bevel nie gevind nie"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr ""
+
+#: builtins/suspend.def:112
+#, fuzzy
+msgid "cannot suspend a login shell"
+msgstr "Begin aanteken tolk"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr ""
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr ""
+
+#: builtins/type.def:275
+#, fuzzy, c-format
+msgid "%s is a function\n"
+msgstr "%s: leesalleen-funksie"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr ""
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr ""
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr ""
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr ""
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr ""
+
+#: builtins/ulimit.def:426
+#, fuzzy, c-format
+msgid "`%c': bad command"
+msgstr "%s: illegal option -- %c\n"
+
+#: builtins/ulimit.def:455
+#, fuzzy, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: kan nie %s skep nie"
+
+#: builtins/ulimit.def:481
+#, fuzzy
+msgid "limit"
+msgstr "Filter beperk:"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, fuzzy, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: kan nie %s skep nie"
+
+#: builtins/umask.def:115
+#, fuzzy
+msgid "octal number"
+msgstr "Die sein nommer wat was gevang het"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr ""
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr ""
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr ""
+
+#: error.c:164
+#, fuzzy, c-format
+msgid "last command: %s\n"
+msgstr "Bevelreël"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr ""
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr ""
+
+#: error.c:462
+#, fuzzy
+msgid "unknown command error"
+msgstr "Onbekende fout %d"
+
+#: error.c:463
+#, fuzzy
+msgid "bad command type"
+msgstr "bevelnaam"
+
+#: error.c:464
+#, fuzzy
+msgid "bad connector"
+msgstr "foutiewe verbinder`%d'"
+
+#: error.c:465
+#, fuzzy
+msgid "bad jump"
+msgstr "Spring na:"
+
+#: error.c:503
+#, fuzzy, c-format
+msgid "%s: unbound variable"
+msgstr "Veranderlike boom"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr ""
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr ""
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr ""
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr ""
+
+#: execute_cmd.c:2486
+#, fuzzy
+msgid "pipe error"
+msgstr "pypfout: %s"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr ""
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: bevel nie gevind nie"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr ""
+
+#: execute_cmd.c:5854
+#, fuzzy, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: is 'n gids"
+
+#: execute_cmd.c:5891
+#, fuzzy, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: kan nie 'n binêre lêer uitvoer nie"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr ""
+
+#: execute_cmd.c:6029
+#, fuzzy, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "kan nie fd %d na fd 0 dupliseer nie: %s"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr ""
+
+#: expr.c:291
+#, fuzzy
+msgid "recursion stack underflow"
+msgstr "Stapel grootte verhoog"
+
+#: expr.c:477
+#, fuzzy
+msgid "syntax error in expression"
+msgstr "Sintaks fout in patroon"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr ""
+
+#: expr.c:530
+#, fuzzy
+msgid "syntax error in variable assignment"
+msgstr "Sintaks fout in patroon"
+
+#: expr.c:544 expr.c:911
+#, fuzzy
+msgid "division by 0"
+msgstr "devisie by nul."
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr ""
+
+#: expr.c:646
+#, fuzzy
+msgid "`:' expected for conditional expression"
+msgstr "Soek die lêer vir 'n uitdrukking"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr ""
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr ""
+
+#: expr.c:1056
+#, fuzzy
+msgid "missing `)'"
+msgstr "Ontbrekende '>'"
+
+#: expr.c:1107 expr.c:1487
+#, fuzzy
+msgid "syntax error: operand expected"
+msgstr "Onverwagte einde van lêer tydens inlees van hulpbron."
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr ""
+
+#: expr.c:1513
+#, fuzzy, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr ""
+"Hierdie is die fout boodskap van %1:\n"
+"%2"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr ""
+
+#: expr.c:1582
+msgid "invalid integer constant"
+msgstr ""
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "waarde te groot vir basis"
+
+#: expr.c:1647
+#, fuzzy, c-format
+msgid "%s: expression error\n"
+msgstr "Pypfout.\n"
+
+#: general.c:70
+#, fuzzy
+msgid "getcwd: cannot access parent directories"
+msgstr "Kan nie die program uitvoer nie:"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr ""
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr ""
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr ""
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr ""
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr ""
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr ""
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr ""
+
+#: jobs.c:1850
+#, fuzzy, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "E108: Geen veranderlike: \"%s\""
+
+#: jobs.c:1865
+#, fuzzy, c-format
+msgid "Signal %d"
+msgstr "Sein kwaliteit:"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Klaar"
+
+#: jobs.c:1884 siglist.c:122
+#, fuzzy
+msgid "Stopped"
+msgstr "Op gehou"
+
+#: jobs.c:1888
+#, fuzzy, c-format
+msgid "Stopped(%s)"
+msgstr "Op gehou"
+
+#: jobs.c:1892
+#, fuzzy
+msgid "Running"
+msgstr "aktief"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Klaar(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Verlaat %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Onbekende status"
+
+#: jobs.c:2001
+#, fuzzy, c-format
+msgid "(core dumped) "
+msgstr "Kern Ontwikkelaar"
+
+#: jobs.c:2020
+#, fuzzy, c-format
+msgid "  (wd: %s)"
+msgstr "Aktiveer nou dadelik"
+
+#: jobs.c:2259
+#, fuzzy, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "Fout in die skryf van %s"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr ""
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr ""
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr ""
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: kan nie %s skep nie"
+
+#: jobs.c:3571
+#, fuzzy, c-format
+msgid "%s: job has terminated"
+msgstr "Die bediener beëindig Die verbinding."
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr ""
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr ""
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr ""
+
+#: jobs.c:4334 nojobs.c:919
+#, fuzzy, c-format
+msgid " (core dumped)"
+msgstr "Kern Ontwikkelaar"
+
+#: jobs.c:4346 jobs.c:4359
+#, fuzzy, c-format
+msgid "(wd now: %s)\n"
+msgstr "Aktiveer nou dadelik"
+
+#: jobs.c:4391
+#, fuzzy
+msgid "initialize_job_control: getpgrp failed"
+msgstr "Inisialisering van OpenGL het misluk."
+
+#: jobs.c:4447
+msgid "initialize_job_control: no job control in background"
+msgstr ""
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr ""
+
+#: jobs.c:4473
+#, fuzzy
+msgid "initialize_job_control: setpgid"
+msgstr "Inisialisering van OpenGL het misluk."
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr ""
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "geen taakbeheer in hierdie dop nie"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr ""
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "onbekend"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr ""
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr ""
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr ""
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr ""
+
+#: lib/malloc/malloc.c:1001
+msgid "free: underflow detected; magic8 corrupted"
+msgstr ""
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr ""
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr ""
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr ""
+
+#: lib/malloc/malloc.c:1141
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr ""
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr ""
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr ""
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr ""
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr ""
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr ""
+
+#: lib/sh/netopen.c:168
+#, fuzzy, c-format
+msgid "%s: host unknown"
+msgstr "onbekend"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr ""
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr ""
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr ""
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr ""
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr ""
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr ""
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr ""
+
+#: mailcheck.c:439
+#, fuzzy
+msgid "You have mail in $_"
+msgstr "Bevestig Pos In"
+
+#: mailcheck.c:464
+#, fuzzy
+msgid "You have new mail in $_"
+msgstr "Wanneer nuwe pos arriveer in"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr ""
+
+#: make_cmd.c:317
+#, fuzzy
+msgid "syntax error: arithmetic expression required"
+msgstr "Sintaks fout in patroon"
+
+#: make_cmd.c:319
+#, fuzzy
+msgid "syntax error: `;' unexpected"
+msgstr "Onverwagte einde van lêer tydens inlees van hulpbron."
+
+#: make_cmd.c:320
+#, fuzzy, c-format
+msgid "syntax error: `((%s))'"
+msgstr "sintaksfout"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr ""
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr ""
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr ""
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr ""
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr ""
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr ""
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr ""
+
+#: parse.y:4705
+#, fuzzy
+msgid "syntax error in conditional expression"
+msgstr "Sintaks fout in patroon"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr ""
+
+#: parse.y:4787
+#, fuzzy
+msgid "expected `)'"
+msgstr "')' is verwag\n"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr ""
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr ""
+
+#: parse.y:4865
+#, fuzzy, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "%s: binêre operator is verwag\n"
+
+#: parse.y:4869
+#, fuzzy
+msgid "conditional binary operator expected"
+msgstr "%s: binêre operator is verwag\n"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr ""
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr ""
+
+#: parse.y:4906
+#, fuzzy, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "Soek die lêer vir 'n uitdrukking"
+
+#: parse.y:4909
+#, fuzzy, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "Soek die lêer vir 'n uitdrukking"
+
+#: parse.y:4913
+#, fuzzy, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "Soek die lêer vir 'n uitdrukking"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr ""
+
+#: parse.y:6355
+#, fuzzy, c-format
+msgid "syntax error near `%s'"
+msgstr "Sintaks fout in patroon"
+
+#: parse.y:6365
+#, fuzzy
+msgid "syntax error: unexpected end of file"
+msgstr "Onverwagte einde van lêer tydens inlees van hulpbron."
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "sintaksfout"
+
+#: parse.y:6428
+#, fuzzy, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Gebruik Kaart na Los Tronk"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr ""
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr ""
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr ""
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr ""
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr ""
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr ""
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr ""
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr ""
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr ""
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr ""
+
+#: redir.c:204
+#, fuzzy, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: dubbelsinnige herroetering"
+
+#: redir.c:208
+#, fuzzy, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "Jy het gespesifiseer 'n bestaande lêer"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr ""
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr ""
+
+#: redir.c:222
+#, fuzzy, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "Kan nie soek 'n handtekening in hierdie boodskap!"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr ""
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+#, fuzzy
+msgid "redirection error: cannot duplicate fd"
+msgstr "Pypfout.\n"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr ""
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr ""
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr ""
+
+#: shell.c:948
+#, fuzzy, c-format
+msgid "%c%c: invalid option"
+msgstr "%s: illegal option -- %c\n"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr ""
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr ""
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr ""
+
+#: shell.c:1632
+#, fuzzy, c-format
+msgid "%s: Is a directory"
+msgstr "%s: is 'n gids"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "Ek het nie 'n naam nie!"
+
+#: shell.c:2035
+#, fuzzy, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "bedryfstelselkernweergawe"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+
+#: shell.c:2038
+#, fuzzy
+msgid "GNU long options:\n"
+msgstr "Gnu C Saamsteller Opsies"
+
+#: shell.c:2042
+#, fuzzy
+msgid "Shell options:\n"
+msgstr "opneem opsies"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr ""
+
+#: shell.c:2062
+#, fuzzy, c-format
+msgid "\t-%s or -o option\n"
+msgstr ""
+"Gebruik so: %s LÊER \n"
+"   of:  %s OPSIE\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr ""
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr ""
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr ""
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr ""
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr ""
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Foutiewe sein"
+
+#: siglist.c:50
+#, fuzzy
+msgid "Hangup"
+msgstr "Ophang"
+
+#: siglist.c:54
+#, fuzzy
+msgid "Interrupt"
+msgstr "Interrupt"
+
+#: siglist.c:58
+#, fuzzy
+msgid "Quit"
+msgstr "Verlaat"
+
+#: siglist.c:62
+#, fuzzy
+msgid "Illegal instruction"
+msgstr "Sigill (onwettige instruksie)"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr ""
+
+#: siglist.c:74
+#, fuzzy
+msgid "ABORT instruction"
+msgstr "Verwerking Instruksie"
+
+#: siglist.c:78
+#, fuzzy
+msgid "EMT instruction"
+msgstr "Verwerking Instruksie"
+
+#: siglist.c:82
+#, fuzzy
+msgid "Floating point exception"
+msgstr "wisselpuntgetaluitsondering"
+
+#: siglist.c:86
+#, fuzzy
+msgid "Killed"
+msgstr "Doodgemaak proses."
+
+#: siglist.c:90
+#, fuzzy
+msgid "Bus error"
+msgstr "Pypfout.\n"
+
+#: siglist.c:94
+#, fuzzy
+msgid "Segmentation fault"
+msgstr "Sigsegv (segmentasie oortreding)"
+
+#: siglist.c:98
+#, fuzzy
+msgid "Bad system call"
+msgstr "fork-stelselroep het gefaal"
+
+#: siglist.c:102
+#, fuzzy
+msgid "Broken pipe"
+msgstr "Sigpipe (gebroke pyp)"
+
+#: siglist.c:106
+#, fuzzy
+msgid "Alarm clock"
+msgstr "wêreld horlosie"
+
+#: siglist.c:110
+#, fuzzy
+msgid "Terminated"
+msgstr ""
+"\n"
+"Bevel beëindig\n"
+
+#: siglist.c:114
+#, fuzzy
+msgid "Urgent IO condition"
+msgstr "Ooreenstem enige kondisie"
+
+#: siglist.c:118
+#, fuzzy
+msgid "Stopped (signal)"
+msgstr "Sein kwaliteit:"
+
+#: siglist.c:126
+#, fuzzy
+msgid "Continue"
+msgstr "Gaan voort"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr ""
+
+#: siglist.c:138
+#, fuzzy
+msgid "Stopped (tty input)"
+msgstr "Sigttin (tty invoer)"
+
+#: siglist.c:142
+#, fuzzy
+msgid "Stopped (tty output)"
+msgstr "Sigttou (tty uitset)"
+
+#: siglist.c:146
+#, fuzzy
+msgid "I/O ready"
+msgstr "Gereed."
+
+#: siglist.c:150
+#, fuzzy
+msgid "CPU limit"
+msgstr "Filter beperk:"
+
+#: siglist.c:154
+#, fuzzy
+msgid "File limit"
+msgstr "Filter beperk:"
+
+#: siglist.c:158
+#, fuzzy
+msgid "Alarm (virtual)"
+msgstr "virtuele werkskerms"
+
+#: siglist.c:162
+#, fuzzy
+msgid "Alarm (profile)"
+msgstr "Vee profiel uit..."
+
+#: siglist.c:166
+#, fuzzy
+msgid "Window changed"
+msgstr "Lêer Het verander"
+
+#: siglist.c:170
+#, fuzzy
+msgid "Record lock"
+msgstr "Sluit Lêers"
+
+#: siglist.c:174
+#, fuzzy
+msgid "User signal 1"
+msgstr "Gebruiker Sein 1"
+
+#: siglist.c:178
+#, fuzzy
+msgid "User signal 2"
+msgstr "Gebruiker Sein 1"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr ""
+
+#: siglist.c:186
+#, fuzzy
+msgid "power failure imminent"
+msgstr "Vaaling na Uitpak"
+
+#: siglist.c:190
+#, fuzzy
+msgid "system crash imminent"
+msgstr "Die Kde Omval Handteerder"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr ""
+
+#: siglist.c:198
+#, fuzzy
+msgid "programming error"
+msgstr "Pypfout.\n"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr ""
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr ""
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr ""
+
+#: siglist.c:214
+msgid "Information request"
+msgstr ""
+
+#: siglist.c:222 siglist.c:224
+#, fuzzy, c-format
+msgid "Unknown Signal #%d"
+msgstr "Sein kwaliteit:"
+
+#: subst.c:1476 subst.c:1666
+#, fuzzy, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "--Geen reëls in buffer--"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr ""
+
+#: subst.c:5910 subst.c:5926
+#, fuzzy
+msgid "cannot make pipe for process substitution"
+msgstr "Woord Substitusie"
+
+#: subst.c:5985
+#, fuzzy
+msgid "cannot make child for process substitution"
+msgstr "Woord Substitusie"
+
+#: subst.c:6059
+#, fuzzy, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "Kan nie oopmaak vir skrip-afvoer nie: \""
+
+#: subst.c:6061
+#, fuzzy, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "Kan nie oopmaak vir skrip-afvoer nie: \""
+
+#: subst.c:6084
+#, fuzzy, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "Kan nie oopmaak vir skrip-afvoer nie: \""
+
+#: subst.c:6213
+#, fuzzy
+msgid "command substitution: ignored null byte in input"
+msgstr "--Geen reëls in buffer--"
+
+#: subst.c:6353
+#, fuzzy
+msgid "cannot make pipe for command substitution"
+msgstr "Woord Substitusie"
+
+#: subst.c:6397
+#, fuzzy
+msgid "cannot make child for command substitution"
+msgstr "Woord Substitusie"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr ""
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr ""
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr ""
+
+#: subst.c:7013 subst.c:7177
+#, fuzzy, c-format
+msgid "%s: invalid variable name"
+msgstr "Veranderlike boom"
+
+#: subst.c:7256
+#, c-format
+msgid "%s: parameter not set"
+msgstr ""
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr ""
+
+#: subst.c:7503 subst.c:7518
+#, fuzzy, c-format
+msgid "%s: substring expression < 0"
+msgstr "ongeldige uitdrukking"
+
+#: subst.c:9281 subst.c:9302
+#, fuzzy, c-format
+msgid "%s: bad substitution"
+msgstr "Woord Substitusie"
+
+#: subst.c:9390
+#, fuzzy, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "Kan nie soek 'n handtekening in hierdie boodskap!"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+
+#: subst.c:10367
+#, fuzzy, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "--Geen reëls in buffer--"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr ""
+
+#: test.c:147
+#, fuzzy
+msgid "argument expected"
+msgstr "argument verwag\n"
+
+#: test.c:156
+#, fuzzy, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: heelgetal-uitdrukking is verwag\n"
+
+#: test.c:265
+#, fuzzy
+msgid "`)' expected"
+msgstr "')' is verwag\n"
+
+#: test.c:267
+#, fuzzy, c-format
+msgid "`)' expected, found %s"
+msgstr "')' is verwag, maar %s gevind\n"
+
+#: test.c:466 test.c:799
+#, fuzzy, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: binêre operator is verwag\n"
+
+#: test.c:756 test.c:759
+#, fuzzy, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: unitêre operator is verwag\n"
+
+#: test.c:881
+#, fuzzy
+msgid "missing `]'"
+msgstr "Ontbrekende '>'"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "Onverwagte einde van lêer tydens inlees van hulpbron."
+
+#: trap.c:220
+#, fuzzy
+msgid "invalid signal number"
+msgstr "Die sein nommer wat was gevang het"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr ""
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr ""
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr ""
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr ""
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr ""
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr ""
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr ""
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr ""
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr ""
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr ""
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr ""
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr ""
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr ""
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr ""
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr ""
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr ""
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr ""
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr ""
+
+#: version.c:46 version2.c:46
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr ""
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+
+#: version.c:86 version2.c:86
+#, fuzzy, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "bedryfstelselkernweergawe"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr ""
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr ""
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr ""
+
+#: xmalloc.c:95
+#, fuzzy, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: kan nie %s skep nie"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr ""
+
+#: xmalloc.c:167
+#, fuzzy, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: kan nie %s skep nie"
+
+#: builtins.c:45
+#, fuzzy
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "E418: Ongeldige waarde: %s"
+
+#: builtins.c:49
+#, fuzzy
+msgid "unalias [-a] name [name ...]"
+msgstr "Volle Naam:"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+
+#: builtins.c:56
+#, fuzzy
+msgid "break [n]"
+msgstr "Breek"
+
+#: builtins.c:58
+#, fuzzy
+msgid "continue [n]"
+msgstr "Gaan voort"
+
+#: builtins.c:60
+#, fuzzy
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "Ontfouting %1 (met arg %2 %3)"
+
+#: builtins.c:63
+#, fuzzy
+msgid "caller [expr]"
+msgstr "/Opsies/Toets"
+
+#: builtins.c:66
+#, fuzzy
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "init_cache_dir %s... "
+
+#: builtins.c:68
+#, fuzzy
+msgid "pwd [-LP]"
+msgstr "miniserv.pl is gestop\n"
+
+#: builtins.c:76
+#, fuzzy
+msgid "command [-pVv] command [arg ...]"
+msgstr "Gebruik so: %s [OPSIE] [BEVEL [ARG]...]\n"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "E418: Ongeldige waarde: %s"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "E418: Ongeldige waarde: %s"
+
+#: builtins.c:82
+#, fuzzy
+msgid "local [option] name[=value] ..."
+msgstr "Name=Plaaslike Netwerk"
+
+#: builtins.c:85
+#, fuzzy
+msgid "echo [-neE] [arg ...]"
+msgstr "Ontfouting %1 (met arg %2 %3)"
+
+#: builtins.c:89
+#, fuzzy
+msgid "echo [-n] [arg ...]"
+msgstr "Konfigureer Eggo"
+
+#: builtins.c:92
+#, fuzzy
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "Teruglus lêernaam:"
+
+#: builtins.c:94
+#, fuzzy
+msgid "eval [arg ...]"
+msgstr "Ontfouting %1 (met arg %2 %3)"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "Kom ons begin!"
+
+#: builtins.c:98
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr ""
+
+#: builtins.c:100
+#, fuzzy
+msgid "exit [n]"
+msgstr "Verlaat"
+
+#: builtins.c:102
+#, fuzzy
+msgid "logout [n]"
+msgstr "Afteken"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr ""
+
+#: builtins.c:109
+#, fuzzy
+msgid "fg [job_spec]"
+msgstr "Kort Spesifikasie werkvoorbeeld"
+
+#: builtins.c:113
+#, fuzzy
+msgid "bg [job_spec ...]"
+msgstr "Kort Spesifikasie werkvoorbeeld"
+
+#: builtins.c:116
+#, fuzzy
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "Teruglus lêernaam:"
+
+#: builtins.c:119
+#, fuzzy
+msgid "help [-dms] [pattern ...]"
+msgstr "enige patroon"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr ""
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr ""
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+
+#: builtins.c:136
+#, fuzzy
+msgid "let arg [arg ...]"
+msgstr "Kom ons begin!"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+
+#: builtins.c:140
+#, fuzzy
+msgid "return [n]"
+msgstr "Terug Adres - 3/4 x 2\""
+
+#: builtins.c:142
+#, fuzzy
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "Gebruik so: %s [OPSIE]... [-] [GEBRUIKER [ARG]...]\n"
+
+#: builtins.c:144
+#, fuzzy
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "Volle Naam:"
+
+#: builtins.c:146
+#, fuzzy
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "Bediener of domein naam:"
+
+#: builtins.c:148
+#, fuzzy
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "Bediener of domein naam:"
+
+#: builtins.c:150
+#, fuzzy
+msgid "shift [n]"
+msgstr "Shift"
+
+#: builtins.c:152
+#, fuzzy
+msgid "source filename [arguments]"
+msgstr "Kies Lêernaam"
+
+#: builtins.c:154
+#, fuzzy
+msgid ". filename [arguments]"
+msgstr ". lêernaam"
+
+#: builtins.c:157
+#, fuzzy
+msgid "suspend [-f]"
+msgstr "|uitsit}\n"
+
+#: builtins.c:160
+#, fuzzy
+msgid "test [expr]"
+msgstr "/Opsies/Toets"
+
+#: builtins.c:162
+#, fuzzy
+msgid "[ arg... ]"
+msgstr "Arg %1"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr ""
+
+#: builtins.c:168
+#, fuzzy
+msgid "type [-afptP] name [name ...]"
+msgstr "Tipe die naam van die %1 speler."
+
+#: builtins.c:171
+#, fuzzy
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "Grootte beperk (Kb):"
+
+#: builtins.c:174
+#, fuzzy
+msgid "umask [-p] [-S] [mode]"
+msgstr "Belmetode"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "Konfigureer Eggo"
+
+#: builtins.c:181
+#, fuzzy
+msgid "wait [pid ...]"
+msgstr "Wag:"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr ""
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr ""
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr ""
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr ""
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr ""
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr ""
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr ""
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr ""
+
+#: builtins.c:202
+#, fuzzy
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "Bediener of domein naam:"
+
+#: builtins.c:204
+#, fuzzy
+msgid "{ COMMANDS ; }"
+msgstr "Opdragte"
+
+#: builtins.c:206
+#, fuzzy
+msgid "job_spec [&]"
+msgstr "Kort Spesifikasie werkvoorbeeld"
+
+#: builtins.c:208
+#, fuzzy
+msgid "(( expression ))"
+msgstr "Bools uitdrukking verwag"
+
+#: builtins.c:210
+#, fuzzy
+msgid "[[ expression ]]"
+msgstr "Bools uitdrukking verwag"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr ""
+
+#: builtins.c:215
+#, fuzzy
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "Tydelike gids:"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr ""
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr ""
+
+#: builtins.c:226
+#, fuzzy
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "Volle Naam:"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr ""
+
+#: builtins.c:231
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+
+#: builtins.c:235
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+
+#: builtins.c:239
+#, fuzzy
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "Volle Naam:"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+
+#: builtins.c:244
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+
+#: builtins.c:354
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+
+#: builtins.c:490
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+
+#: builtins.c:557
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+
+#: builtins.c:652
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+
+#: builtins.c:1431
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+
+#: builtins.c:1502
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+
+#: builtins.c:1726
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+
+#: builtins.c:1971
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+
+#, fuzzy
+#~ msgid "Unknown Signal #"
+#~ msgstr "Sein kwaliteit:"
+
+#~ msgid "Missing `}'"
+#~ msgstr "Ontbrekende `}'"
+
+#~ msgid "brace_expand> "
+#~ msgstr "krulhakie_uitbrei>"
+
+#~ msgid "Attempt to free unknown command type `%d'.\n"
+#~ msgstr "Poging om onbekende beveltipe vry te maak `%d'.\n"
+
+#~ msgid "Report this to %s\n"
+#~ msgstr "Meld dit aan by %s\n"
+
+#~ msgid "Stopping myself..."
+#~ msgstr "Besig om myself te stop..."
+
+#~ msgid "Tell %s to fix this someday.\n"
+#~ msgstr "Laat weet %s om dit eendag reg te maak.\n"
+
+#, fuzzy
+#~ msgid "execute_command: bad command type `%d'"
+#~ msgstr "Uitvoer 'n tolk opdrag lyn"
+
+#~ msgid "real\t"
+#~ msgstr "regtig\t"
+
+#~ msgid "user\t"
+#~ msgstr "gebruiker\t"
+
+#~ msgid "sys\t"
+#~ msgstr "stelsel\t"
+
+#~ msgid ""
+#~ "real\t0m0.00s\n"
+#~ "user\t0m0.00s\n"
+#~ "sys\t0m0.00s\n"
+#~ msgstr ""
+#~ "regtig\t0m0.00s\n"
+#~ "gebruiker\t0m0.00s\n"
+#~ "stelsel\t0m0.00s\n"
+
+#~ msgid "cannot duplicate fd %d to fd 1: %s"
+#~ msgstr "kan nie fd %d na fd 1 dupliseer nie: %s"
+
+#, fuzzy
+#~ msgid "%s: output redirection restricted"
+#~ msgstr "gebruik tans beperkte dop %s"
+
+#, fuzzy
+#~ msgid "Out of memory!"
+#~ msgstr "Te min geheue."
+
+#, fuzzy
+#~ msgid "You have already added item `%s'\n"
+#~ msgstr "Jy alreeds het 'n groep genaamd %1."
+
+#, fuzzy
+#~ msgid "You have entered %d (%d) items.  The distribution is:\n"
+#~ msgstr "Die wagwoord frase jy ingevoerde is ongeldige."
+
+#, fuzzy
+#~ msgid "slot %3d: "
+#~ msgstr "3d modus"
+
+#, fuzzy
+#~ msgid "<unknown>"
+#~ msgstr "(onbekend)"
+
+#, fuzzy
+#~ msgid "%s: bg background job?"
+#~ msgstr "Druktaak gestuur."
+
+#, fuzzy
+#~ msgid "cprintf: bad `%%' argument (%c)"
+#~ msgstr "%s: option `%s' requires an argument\n"
+
+#, fuzzy
+#~ msgid "option `%s' requires an argument"
+#~ msgstr "%s: option `%s' requires an argument\n"
+
+#, fuzzy
+#~ msgid "%s: unrecognized option"
+#~ msgstr "%s: unrecognized option `%c%s'\n"
+
+#, fuzzy
+#~ msgid "`-c' requires an argument"
+#~ msgstr "%s: option `%s' requires an argument\n"
+
+#, fuzzy
+#~ msgid "reading"
+#~ msgstr "besig om te lees"
+
+#, fuzzy
+#~ msgid "writing"
+#~ msgstr "besig om te skryf"
+
+#, fuzzy
+#~ msgid "$%c: unbound variable"
+#~ msgstr "Veranderlike boom"
+
+#, fuzzy
+#~ msgid "%s: bad arithmetic substitution"
+#~ msgstr "&Sintetisering/Wiskundige + Menging"
+
+#, fuzzy
+#~ msgid "-%s: binary operator expected"
+#~ msgstr "%s: binêre operator is verwag\n"
+
+#, fuzzy
+#~ msgid "%s[%s: bad subscript"
+#~ msgstr "Slegte formule."
+
+#, fuzzy
+#~ msgid "[%s: bad subscript"
+#~ msgstr "Slegte formule."
+
+#, fuzzy
+#~ msgid "option %c\n"
+#~ msgstr "Opsie"
+
+#, fuzzy
+#~ msgid "option a\n"
+#~ msgstr "Opsie"
+
+#, fuzzy
+#~ msgid "option b\n"
+#~ msgstr "Opsie"
+
+#, fuzzy
+#~ msgid "option c with value `%s'\n"
+#~ msgstr "Opsie '%s' vereis 'n waarde."
+
+#, fuzzy
+#~ msgid "non-option ARGV-elements: "
+#~ msgstr "parameters wat nie opsies is nie word geïgnoreer"
+
+#, fuzzy
+#~ msgid "%s: Unknown flag %s.\n"
+#~ msgstr "onbekende vlag: "
+
+#, fuzzy
+#~ msgid "Unknown directive `%s'"
+#~ msgstr "Onbekende direktief"
+
+#, fuzzy
+#~ msgid "%s found before $END"
+#~ msgstr "Nee einde was gevind."
+
+#, fuzzy
+#~ msgid "%s already has a function (%s)"
+#~ msgstr "Proses %1 het alreeds verdwyn!"
+
+#, fuzzy
+#~ msgid "%s already had a docname (%s)"
+#~ msgstr "Alles is alreeds installeer"
+
+#, fuzzy
+#~ msgid "%s already has short documentation (%s)"
+#~ msgstr "Proses %1 het alreeds verdwyn!"
+
+#, fuzzy
+#~ msgid "%s already has a %s definition"
+#~ msgstr "Proses %1 het alreeds verdwyn!"
+
+#, fuzzy
+#~ msgid "mkbuiltins: Out of virtual memory!\n"
+#~ msgstr "GenericName=Virtuele Geheue Statistieke"
+
+#~ msgid ":"
+#~ msgstr ":"
+
+#, fuzzy
+#~ msgid "times"
+#~ msgstr "Herhaal %1  times "
+
+#, fuzzy
+#~ msgid "%[DIGITS | WORD] [&]"
+#~ msgstr "Woord oorvloei"
+
+#, fuzzy
+#~ msgid "Arguments we accept:"
+#~ msgstr "Aanvaar karakter verstel:"
+
+#, fuzzy
+#~ msgid "                     vi-command, and vi-insert."
+#~ msgstr "Biep op kaart voeg by en verwydering"
+
+#, fuzzy
+#~ msgid "  -l                 List names of functions."
+#~ msgstr "Verander Posisies/Name..."
+
+#, fuzzy
+#~ msgid "                     reused as input."
+#~ msgstr "Invoer Versterking Limiet"
+
+#, fuzzy
+#~ msgid "  -r  keyseq         Remove the binding for KEYSEQ."
+#~ msgstr "Verwyder koekies vir domein."
+
+#, fuzzy
+#~ msgid "break N levels."
+#~ msgstr "6 nuwe vlakke"
+
+#, fuzzy
+#~ msgid "to be followed."
+#~ msgstr "Lêers na Wees Uitgepak"
+
+#, fuzzy
+#~ msgid "The flags are:"
+#~ msgstr "Linker Vlaggies"
+
+#, fuzzy
+#~ msgid "name only."
+#~ msgstr "Naam slegs"
+
+#, fuzzy
+#~ msgid "Obsolete.  See `declare'."
+#~ msgstr "Verkeerde verklaring tipe"
+
+#, fuzzy
+#~ msgid "\t\\a\talert (bell)"
+#~ msgstr "stelsel klok"
+
+#, fuzzy
+#~ msgid "\t\\c\tsuppress trailing newline"
+#~ msgstr "Verwyder agterste spasies"
+
+#, fuzzy
+#~ msgid "\t\\E\tescape character"
+#~ msgstr "Ongeldige karakter <%s>"
+
+#, fuzzy
+#~ msgid "\t\\f\tform feed"
+#~ msgstr "Koevert Voer"
+
+#, fuzzy
+#~ msgid "\t\\n\tnew line"
+#~ msgstr "Lyn uit"
+
+#, fuzzy
+#~ msgid "\t\\r\tcarriage return"
+#~ msgstr "Terug Adres - 3/4 x 2\""
+
+#, fuzzy
+#~ msgid "\t\\t\thorizontal tab"
+#~ msgstr "Oortjie Wydte:"
+
+#, fuzzy
+#~ msgid "\t\\v\tvertical tab"
+#~ msgstr "Oortjie Wydte:"
+
+#, fuzzy
+#~ msgid "with the -E option."
+#~ msgstr "%s: illegal option -- %c\n"
+
+#, fuzzy
+#~ msgid "printed."
+#~ msgstr "Gedruk: %s"
+
+#, fuzzy
+#~ msgid "is set."
+#~ msgstr "Nie stel"
+
+#, fuzzy
+#~ msgid "string."
+#~ msgstr "String"
+
+#, fuzzy
+#~ msgid "      mode, then vi."
+#~ msgstr "-v\t\t\tVi modus (soos \"vi\")"
+
+#, fuzzy
+#~ msgid "used."
+#~ msgstr "gebruik word"
+
+#, fuzzy
+#~ msgid "job is used."
+#~ msgstr "Die naam '%1' is alreeds gebruik word"
+
+#, fuzzy
+#~ msgid "anything in the history list."
+#~ msgstr "Lêer Alreeds in Lys"
+
+#, fuzzy
+#~ msgid "process group leader."
+#~ msgstr "Proses groep Id"
+
+#, fuzzy
+#~ msgid "\t-, +\t\tunary minus, plus"
+#~ msgstr "Name=Qt Motif Plus"
+
+#, fuzzy
+#~ msgid "\t*, /, %\t\tmultiplication, division, remainder"
+#~ msgstr "devisie by nul."
+
+#, fuzzy
+#~ msgid "\t&\t\tbitwise AND"
+#~ msgstr "en etiket: "
+
+#, fuzzy
+#~ msgid "\t^\t\tbitwise XOR"
+#~ msgstr "operande Xor data"
+
+#, fuzzy
+#~ msgid "\t|\t\tbitwise OR"
+#~ msgstr " of meer"
+
+#, fuzzy
+#~ msgid "\t&&\t\tlogical AND"
+#~ msgstr "en etiket: "
+
+#, fuzzy
+#~ msgid "\t||\t\tlogical OR"
+#~ msgstr " of meer"
+
+#, fuzzy
+#~ msgid "\texpr ? expr : expr"
+#~ msgstr "ooreenstemmende inskrywings gewone uitdrukking."
+
+#, fuzzy
+#~ msgid "\t\t\tconditional expression"
+#~ msgstr "ongeldige uitdrukking"
+
+#, fuzzy
+#~ msgid "rules above."
+#~ msgstr "Boonste Redigeerder"
+
+#, fuzzy
+#~ msgid "    -m  Job control is enabled."
+#~ msgstr "Stop flikkerende (as flikkerende is geaktiveer)"
+
+#, fuzzy
+#~ msgid "    -o option-name"
+#~ msgstr "Gebruik so:  %s [OPSIE] NAAM...\n"
+
+#~ msgid "            allexport    same as -a"
+#~ msgstr "            allexport    dieselfde as -a"
+
+#~ msgid "            braceexpand  same as -B"
+#~ msgstr "            braceexpand  dieselfde as -B"
+
+#~ msgid "            errexit      same as -e"
+#~ msgstr "            errexit      dieselfde as -e"
+
+#~ msgid "            hashall      same as -h"
+#~ msgstr "            hashall      dieselfde as -h"
+
+#~ msgid "            histexpand   same as -H"
+#~ msgstr "            histexpand   dieselfde as -H"
+
+#~ msgid "            interactive-comments"
+#~ msgstr "            interaktiewe-kommentaar"
+
+#~ msgid "            keyword      same as -k"
+#~ msgstr "            keyword      dieselfde as -k"
+
+#~ msgid "            monitor      same as -m"
+#~ msgstr "            monitor      dieselfde as -m"
+
+#~ msgid "            noclobber    same as -C"
+#~ msgstr "            noclobber    dieselfde as -C"
+
+#~ msgid "            noexec       same as -n"
+#~ msgstr "            noexec       dieselfde as -n"
+
+#~ msgid "            noglob       same as -f"
+#~ msgstr "            noglob       dieselfde as -f"
+
+#~ msgid "            notify       save as -b"
+#~ msgstr "            notify       dieselfde as -b"
+
+#~ msgid "            nounset      same as -u"
+#~ msgstr "            nounset      dieselfde as -u"
+
+#~ msgid "            onecmd       same as -t"
+#~ msgstr "            onecmd       dieselfde as -t"
+
+#~ msgid "            physical     same as -P"
+#~ msgstr "            physical     dieselfde as -P"
+
+#~ msgid "                         match the standard"
+#~ msgstr "                         pas by die standaard"
+
+#~ msgid "            privileged   same as -p"
+#~ msgstr "            privileged   dieselfde as -p"
+
+#~ msgid "            verbose      same as -v"
+#~ msgstr "            verbose      dieselfde as -v"
+
+#~ msgid "            xtrace       same as -x"
+#~ msgstr "            xtrace       dieselfde as -x"
+
+#~ msgid "        by default."
+#~ msgstr "        by verstek."
+
+#, fuzzy
+#~ msgid "        by redirection of output."
+#~ msgstr "eSound Uitsetinpropprogram  %s"
+
+#~ msgid "see readonly."
+#~ msgstr "sien leesalleen"
+
+#, fuzzy
+#~ msgid "processing."
+#~ msgstr "Verwerking..."
+
+#, fuzzy
+#~ msgid "File operators:"
+#~ msgstr "lêer assosiasies"
+
+#, fuzzy
+#~ msgid "    -d FILE        True if file is a directory."
+#~ msgstr "%1 is 'n gids, maar 'n lêer was verwag."
+
+#, fuzzy
+#~ msgid "    -e FILE        True if file exists."
+#~ msgstr "Verwyder, as bestaan, die _:kommentaar"
+
+#, fuzzy
+#~ msgid "                   modification date) file2."
+#~ msgstr "Begin na datum"
+
+#, fuzzy
+#~ msgid "String operators:"
+#~ msgstr "Soekstring"
+
+#, fuzzy
+#~ msgid "    -n STRING"
+#~ msgstr "String"
+
+#, fuzzy
+#~ msgid "Other operators:"
+#~ msgstr "Ander weergawe (B):"
+
+#, fuzzy
+#~ msgid ""
+#~ "less-than, less-than-or-equal, greater-than, or greater-than-or-equal"
+#~ msgstr "is grootter as of gelyk na"
+
+#, fuzzy
+#~ msgid "than ARG2."
+#~ msgstr "%1 vroeër as %2"
+
+#~ msgid "the shell."
+#~ msgstr "die dop."
+
+#, fuzzy
+#~ msgid "with \"kill -signal $$\"."
+#~ msgstr "Stuur alle prosesse die KILL sein...\n"
+
+#, fuzzy
+#~ msgid "or unfound, respectively."
+#~ msgstr "Formule of gewig:"
+
+#, fuzzy
+#~ msgid "    -H\tuse the `hard' resource limit"
+#~ msgstr "Minimum waarde is 'n hard beperk"
+
+#, fuzzy
+#~ msgid "    -m\tthe maximum resident set size"
+#~ msgstr "Data inwoonend stel grootte in Kgrepe"
+
+#, fuzzy
+#~ msgid "    -p\tthe pipe buffer size"
+#~ msgstr " Audio Buffer Grootte (antwoord tyd) "
+
+#, fuzzy
+#~ msgid "    -v\tthe size of virtual memory"
+#~ msgstr "GenericName=Virtuele Geheue Statistieke"
+
+#, fuzzy
+#~ msgid "processes."
+#~ msgstr "Prosesse"
+
+#, fuzzy
+#~ msgid "pipeline are waited for."
+#~ msgstr "Die drukker vir wat werke word versoekte"
+
+#, fuzzy
+#~ msgid "the COMMANDS are executed."
+#~ msgstr "Stoor geskiedenis van uitgevoerde bevele."
+
+#, fuzzy
+#~ msgid "function as $0 .. $n."
+#~ msgstr "-L\t\t\tSelfde as -r"
+
+#, fuzzy
+#~ msgid "entire set of commands."
+#~ msgstr "%s outobevele vir \"%s\""
+
+#, fuzzy
+#~ msgid "BASH_VERSION    The version numbers of this Bash."
+#~ msgstr "Hierdie is hoe nommers sal wees vertoon."
+
+#, fuzzy
+#~ msgid "\t\tshell can access."
+#~ msgstr "Konfigureer internettoegang..."
+
+#, fuzzy
+#~ msgid "\t\tfor new mail."
+#~ msgstr "Nuwe Pos Inkennisstelling"
+
+#, fuzzy
+#~ msgid "\t\tlooking for commands."
+#~ msgstr "%s outobevele vir \"%s\""
+
+#, fuzzy
+#~ msgid "\t\tprimary prompt."
+#~ msgstr "Konqueror: Por"
+
+#, fuzzy
+#~ msgid "command_oriented_history"
+#~ msgstr "Herstel/Herstel herroep Geskiedenis..."
+
+#, fuzzy
+#~ msgid "                a single history line."
+#~ msgstr "/Skoopmodus/Lynskoop"
+
+#~ msgid "not each is set."
+#~ msgstr "nie elkeen is gestel nie."
diff --git a/po/bash.pot b/po/bash.pot
new file mode 100644
index 0000000..fb895a2
--- /dev/null
+++ b/po/bash.pot
@@ -0,0 +1,4248 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR Free Software Foundation, Inc.
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"Language: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=CHARSET\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr ""
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr ""
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr ""
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr ""
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr ""
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr ""
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr ""
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr ""
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr ""
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr ""
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr ""
+
+#: bashline.c:4555
+#, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr ""
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr ""
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr ""
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr ""
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr ""
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr ""
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr ""
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr ""
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr ""
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr ""
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr ""
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr ""
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr ""
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr ""
+
+#: builtins/caller.def:136
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr ""
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr ""
+
+#: builtins/cd.def:342
+msgid "null directory"
+msgstr ""
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr ""
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr ""
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr ""
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr ""
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr ""
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr ""
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr ""
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr ""
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr ""
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr ""
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr ""
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr ""
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr ""
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr ""
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr ""
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr ""
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr ""
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr ""
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr ""
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr ""
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr ""
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr ""
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr ""
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr ""
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr ""
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr ""
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr ""
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr ""
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr ""
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr ""
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr ""
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr ""
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr ""
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr ""
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr ""
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr ""
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr ""
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr ""
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr ""
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr ""
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr ""
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr ""
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr ""
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr ""
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr ""
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr ""
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr ""
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr ""
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr ""
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr ""
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr ""
+
+#: builtins/enable.def:388
+#, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr ""
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr ""
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr ""
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr ""
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr ""
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr ""
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr ""
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr ""
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr ""
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr ""
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr ""
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr ""
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr ""
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr ""
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr ""
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr ""
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr ""
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr ""
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr ""
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr ""
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr ""
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr ""
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr ""
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] ""
+msgstr[1] ""
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr ""
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr ""
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr ""
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr ""
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr ""
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr ""
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr ""
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr ""
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr ""
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr ""
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr ""
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr ""
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr ""
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr ""
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr ""
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr ""
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr ""
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr ""
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr ""
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr ""
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr ""
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr ""
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr ""
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr ""
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr ""
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr ""
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr ""
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr ""
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr ""
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr ""
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr ""
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr ""
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr ""
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr ""
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr ""
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr ""
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr ""
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr ""
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr ""
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr ""
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr ""
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr ""
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr ""
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr ""
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr ""
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr ""
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr ""
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr ""
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr ""
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr ""
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr ""
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr ""
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr ""
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr ""
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr ""
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr ""
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr ""
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr ""
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr ""
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr ""
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr ""
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr ""
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr ""
+
+#: error.c:462
+msgid "unknown command error"
+msgstr ""
+
+#: error.c:463
+msgid "bad command type"
+msgstr ""
+
+#: error.c:464
+msgid "bad connector"
+msgstr ""
+
+#: error.c:465
+msgid "bad jump"
+msgstr ""
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr ""
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr ""
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr ""
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr ""
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr ""
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr ""
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr ""
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr ""
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr ""
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr ""
+
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr ""
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr ""
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr ""
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr ""
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr ""
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr ""
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr ""
+
+#: expr.c:530
+msgid "syntax error in variable assignment"
+msgstr ""
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr ""
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr ""
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr ""
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr ""
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr ""
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr ""
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr ""
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr ""
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr ""
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr ""
+
+#: expr.c:1582
+msgid "invalid integer constant"
+msgstr ""
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr ""
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr ""
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr ""
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr ""
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr ""
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr ""
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr ""
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr ""
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr ""
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr ""
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr ""
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr ""
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr ""
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr ""
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr ""
+
+#: jobs.c:1892
+msgid "Running"
+msgstr ""
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr ""
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr ""
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr ""
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr ""
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr ""
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr ""
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr ""
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr ""
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr ""
+
+#: jobs.c:3564
+#, c-format
+msgid "%s: no current jobs"
+msgstr ""
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr ""
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr ""
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr ""
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr ""
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr ""
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr ""
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr ""
+
+#: jobs.c:4447
+msgid "initialize_job_control: no job control in background"
+msgstr ""
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr ""
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr ""
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr ""
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr ""
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr ""
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr ""
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr ""
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr ""
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr ""
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr ""
+
+#: lib/malloc/malloc.c:1001
+msgid "free: underflow detected; magic8 corrupted"
+msgstr ""
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr ""
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr ""
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr ""
+
+#: lib/malloc/malloc.c:1141
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr ""
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr ""
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr ""
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr ""
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr ""
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr ""
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr ""
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr ""
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr ""
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr ""
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr ""
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr ""
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr ""
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr ""
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr ""
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr ""
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr ""
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr ""
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr ""
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr ""
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr ""
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr ""
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr ""
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr ""
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr ""
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr ""
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr ""
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr ""
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr ""
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr ""
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr ""
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr ""
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr ""
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr ""
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr ""
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr ""
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr ""
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr ""
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr ""
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr ""
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr ""
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr ""
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr ""
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr ""
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr ""
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr ""
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr ""
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr ""
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr ""
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr ""
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr ""
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr ""
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr ""
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr ""
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr ""
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr ""
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr ""
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr ""
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr ""
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr ""
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr ""
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr ""
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr ""
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr ""
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr ""
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr ""
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr ""
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr ""
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr ""
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr ""
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr ""
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr ""
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr ""
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr ""
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr ""
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr ""
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr ""
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr ""
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr ""
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr ""
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr ""
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr ""
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr ""
+
+#: siglist.c:58
+msgid "Quit"
+msgstr ""
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr ""
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr ""
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr ""
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr ""
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr ""
+
+#: siglist.c:86
+msgid "Killed"
+msgstr ""
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr ""
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr ""
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr ""
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr ""
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr ""
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr ""
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr ""
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr ""
+
+#: siglist.c:126
+msgid "Continue"
+msgstr ""
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr ""
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr ""
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr ""
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr ""
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr ""
+
+#: siglist.c:154
+msgid "File limit"
+msgstr ""
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr ""
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr ""
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr ""
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr ""
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr ""
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr ""
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr ""
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr ""
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr ""
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr ""
+
+#: siglist.c:198
+msgid "programming error"
+msgstr ""
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr ""
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr ""
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr ""
+
+#: siglist.c:214
+msgid "Information request"
+msgstr ""
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr ""
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr ""
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr ""
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr ""
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr ""
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr ""
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr ""
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr ""
+
+#: subst.c:6213
+msgid "command substitution: ignored null byte in input"
+msgstr ""
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr ""
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr ""
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr ""
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr ""
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr ""
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr ""
+
+#: subst.c:7256
+#, c-format
+msgid "%s: parameter not set"
+msgstr ""
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr ""
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr ""
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr ""
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr ""
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr ""
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr ""
+
+#: test.c:147
+msgid "argument expected"
+msgstr ""
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr ""
+
+#: test.c:265
+msgid "`)' expected"
+msgstr ""
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr ""
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr ""
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr ""
+
+#: test.c:881
+msgid "missing `]'"
+msgstr ""
+
+#: test.c:899
+#, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr ""
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr ""
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr ""
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr ""
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr ""
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr ""
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr ""
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr ""
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr ""
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr ""
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr ""
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr ""
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr ""
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr ""
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr ""
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr ""
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr ""
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr ""
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr ""
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr ""
+
+#: version.c:46 version2.c:46
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr ""
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr ""
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr ""
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr ""
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr ""
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr ""
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr ""
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr ""
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr ""
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr ""
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr ""
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr ""
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr ""
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr ""
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr ""
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr ""
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr ""
+
+#: builtins.c:78
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr ""
+
+#: builtins.c:80
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr ""
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr ""
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr ""
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr ""
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr ""
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr ""
+
+#: builtins.c:96
+msgid "getopts optstring name [arg ...]"
+msgstr ""
+
+#: builtins.c:98
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr ""
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr ""
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr ""
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr ""
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr ""
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr ""
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr ""
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr ""
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr ""
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr ""
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr ""
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr ""
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr ""
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr ""
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr ""
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr ""
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr ""
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr ""
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ""
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr ""
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr ""
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr ""
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr ""
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr ""
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr ""
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr ""
+
+#: builtins.c:177
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr ""
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr ""
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr ""
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr ""
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr ""
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr ""
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr ""
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr ""
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr ""
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr ""
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr ""
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr ""
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr ""
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr ""
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr ""
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr ""
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr ""
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr ""
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr ""
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr ""
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr ""
+
+#: builtins.c:231
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+
+#: builtins.c:235
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+
+#: builtins.c:239
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr ""
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+
+#: builtins.c:244
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+
+#: builtins.c:354
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+
+#: builtins.c:490
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+
+#: builtins.c:557
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+
+#: builtins.c:652
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+
+#: builtins.c:1431
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+
+#: builtins.c:1502
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+
+#: builtins.c:1726
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+
+#: builtins.c:1971
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
diff --git a/po/bg.gmo b/po/bg.gmo
new file mode 100644
index 0000000..fc64741
--- /dev/null
+++ b/po/bg.gmo
diff --git a/po/bg.po b/po/bg.po
new file mode 100644
index 0000000..0398655
--- /dev/null
+++ b/po/bg.po
@@ -0,0 +1,6214 @@
+# Bulgarian translation of bash po-file.
+# Copyright (C) 2007, 2010, 2012, 2013, 2014, 2015, 2016, 2018, 2020 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+# Alexander Shopov <ash@kambanaria.org>, 2007, 2010, 2012, 2013, 2014, 2015, 2016, 2018, 2020.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: bash-5.0\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2020-03-27 19:47+0100\n"
+"Last-Translator: Alexander Shopov <ash@kambanaria.org>\n"
+"Language-Team: Bulgarian <dict@ludost.net>\n"
+"Language: bg\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "грешен индек� на ма�ив"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr "%s: изтриване на атрибута за указател от променливата"
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: ма�ивът не може да бъде преобразуван към речник"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: грешно име на ключ в речник"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: не може да �е при�во�ва на нецифров индек�"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr "%s: %s: при при�во�ване към речник тр�бва да �е използва индек�"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: не може да �е �ъздаде: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr ""
+"изпълнение на команда на Юник� от bash: не може да �е открие подредбата на\n"
+"функциите на клавишите за командата"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: първи�т непразен знак не е „\"“"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "в %2$s лип�ва затвар�щ знак „%1$c“"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: разделител�т „:“ лип�ва"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "„%s“: не може да �е премахне при�во�ване"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr ""
+"заме�тване на изразите � фигурни �коби: не може да �е задели памет за „%s“"
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr ""
+"заме�тване на изразите � фигурни �коби: не може да �е задели памет за %u "
+"елемента"
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr ""
+"заме�тване на изразите � фигурни �коби: не може да �е задели памет за „%s“"
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "„%s“: грешно име на �иноним"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "редактирането на командни� ред не е включено"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "„%s“: грешно име на подредбата на функциите на клавишите"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: не може да �е прочете: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "„%s“:  име на непозната функци�"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s не е зададена на никой клавиш.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s може да �е извика чрез "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "„%s“: не може да �е премахне при�во�ване"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "брой цикли"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "валидно �амо за циклите � „for“, „while“ и „until“"
+
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Връщане на контек�та на текущото извикване на подпрограма.\n"
+"    \n"
+"    Без ИЗР�З връща „$line $filename“.  С ИЗР�З връща\n"
+"    „$line $subroutine $filename“.  Допълнителната информаци� може да �е\n"
+"    използва за получаване на информаци� за �ъ�то�нието на �тека.\n"
+"    \n"
+"    Стойно�тта на ИЗР�За показва за колко рамки �пр�мо текущата да �е "
+"изведе\n"
+"    информаци�.  �ай-горната рамка е 0.\n"
+"    \n"
+"    Изходен код:\n"
+"    Връща 0, о�вен ако обвивката изпълн�ва функци� дефинирана в обвивката "
+"или\n"
+"    ИЗР�Зът е грешен."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "Променливата „HOME“ не е зададена"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "прекалено много аргументи"
+
+#: builtins/cd.def:342
+msgid "null directory"
+msgstr "нулева директори�"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "Променливата „OLDPWD“ не е зададена"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "ред %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "предупреждение: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: употреба: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: опци�та изи�ква аргумент"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: изи�ква �е чи�лов аргумент"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: не е открит"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: грешна опци�"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: грешно име на опци�"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "„%s“: грешен идентификатор"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "грешно о�мично чи�ло"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "грешно ше�тнай�етично чи�ло"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "грешно чи�ло"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: грешно указване на �игнал"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "„%s“: грешен идентификатор на проце� или задача"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: променлива � права �амо за четене"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s е извън допу�тими� диапазон"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "аргументът"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s е извън допу�тими� диапазон"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: н�ма такава задача"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: н�ма управление на задачите"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "н�ма управление на задачите"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: ограничена обвивка"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "ограничена обвивка"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: не е команда вградена в обвивката"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "грешка при запи�: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "грешка при задаване на атрибутите на терминала: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "грешка при получаване на атрибутите на терминала: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: грешка при получаване на текущата директори�: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: нееднозначно указана задача"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr "помощта не е включена в тази вер�и�"
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: не може да �е премахне: %s е �амо за четене"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: не може да �е премахне"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: грешно име на дей�твие"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: не е указано допи�ване"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "предупреждение: опци�та „-F“ може да не работи �поред очаквани�та ви"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "предупреждение: опци�та „-C“ може да не работи �поред очаквани�та ви"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "в момента не �е изпълн�ва функци� за допи�ване"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "може да �е използва �амо във функци�"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr "%s: променливата-указател не може да е ма�ив"
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr "%s: променливата-указател не може да �очи към �ебе �и"
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s: цикъл в променливите-указатели"
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "„%s“: неправилно име за променлива-указател"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "„-f“ не може да �е използва за �ъздаването на функции"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: функци� � права �амо за четене"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr "%s: �ъ�тавното при�во�ване на ма�ив чрез цитат е о�тар�ло"
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: променливите за ма�иви не могат да �е унищожават така"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: речник не може да �е преобразува в ма�ив"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "лип�ва възможно�т за динамично зареждане"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "�поделени�т обект „%s“ не може да бъде зареден: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "„%s“ не може да �е открие в �поделени� обект %s: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: не е зареден динамично"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr "зареждащата функци� за „%s“ върна грешка (%d): не е зареден"
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: не е зареден динамично"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: не може да �е изтрие: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: е директори�"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: не е обикновен файл"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: файлът е прекалено гол�м"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: двоични�т файл не може да бъде изпълнен"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: не може да �е изпълни: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "изход\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "това не е входна обвивка: използвайте „exit“"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Има �прени задачи.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Има изпълн�вани задачи.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "не е открита команда"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "указване на и�тори�та"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: не може да �е отвори временен файл: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "текуща"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "задача %d е �тартирана без управление на задачите"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: непозволена опци� — %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: опци�та изи�ква аргумент — %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "хеширането е изключено"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: таблицата � хешове е празна\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "�ъвпад.\tкоманда\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Команди на обвивката, които напа�ват на ключовата дума „"
+msgstr[1] "Команди на обвивката, които напа�ват на ключовите думи „"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"н�ма теми в помощта, които да отговар�т на „%s“.  Опитайте �\n"
+"„help help“, „man -k %s“ или „info %s“."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: не може да �е отвори: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Тези команди на интерпретатора �а дефинирани вътрешно.\n"
+"�апишете „help“, за да видите �пи�ъка.\n"
+"�апишете „help ИМЕ_��_ФУ�КЦИЯ“ за повече информаци� за �ъответната функци�.\n"
+"�апишете „info bash“ за повече информаци� за обвивката като ц�ло.\n"
+"�апишете „man -k“ или „info“ за повече информаци� за командите извън "
+"�пи�ъка.\n"
+"\n"
+"Знакът звездичка „*“ до името на команда означава, че т� е изключена.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "не може да �е ползва едновременно повече от една от опциите „-anrw“"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "позици� в и�тори�та"
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: грешна дата � време"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: неу�пешно заме�тване чрез и�тори�та"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: неу�пешно извикване на inlib"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "не е позволена друга опци� � „-x“"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: аргументите тр�бва да �а идентификатори на проце�и или задачи"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "�еизве�тна грешка"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "очаква �е израз"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: не е ма�ив"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: грешно указване на файлови� де�криптор"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: грешен файлов де�криптор: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: грешен номер на ред"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: грешен начален индек� за ма�ив"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: грешно количе�тво редове за обработка"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "празно име на променлива за ма�ив"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "изи�ква �е поддръжка на променливи за ма�иви"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "„%s“: лип�ва форматиращ знак"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "„%c“: грешен формат на времето"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "„%c“: грешен форматиращ знак"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "предупреждение: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "неу�пешен анализ на форма̀та: %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "лип�ва ше�тнаде�етична цифра за \\x"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "лип�ва цифра за Уникод за \\%c"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "н�ма друга директори�"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s: грешен аргумент"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "«н�ма текуща директори�»"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "�текът � директории е празен"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "индек� за �тека � директории"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Извежда �пи�ъка � текущо запомнените директории.  Спи�ъкът �е попълва чрез\n"
+"    командата „pushd“.  Можете да вадите директории от �пи�ъка � командата\n"
+"    „popd“.\n"
+"    \n"
+"    Опции:\n"
+"      -c  изчи�тва �тека на директориите като изтрива в�ички елементи.\n"
+"      -l  кара командата „dirs“ да извежда пълните имена на директориите,\n"
+"          а не �ъкратените �ъ� тилда „~“.\n"
+"      -p  поредово отпечатване на �тека на директориите.\n"
+"      -v  поредово отпечатване на �тека на директориите заедно � номера в\n"
+"          �тека.\n"
+"    \n"
+"    �ргументи:    \n"
+"      +N  извежда N-ти� елемент отл�во в �пи�ъка отпечатан от командата "
+"„dirs“,\n"
+"          когато е �тартирана без опции.  Брои �е от 0.\n"
+"    \n"
+"      -N  извежда N-ти� елемент отд��но в �пи�ъка отпечатан от командата "
+"„dirs“,\n"
+"          когато е �тартирана без опции.  Брои �е от 0."
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Добав� директори� в �тека на директориите или превърта �тека\n"
+"    като най-горна директори� �тава текущата директори�.  Без\n"
+"    аргументи �мен� най-горните две директории.\n"
+"    \n"
+"    Опции:\n"
+"      -n  подти�кане на нормалното преминаване към директори� при добав�нето "
+"на\n"
+"          директории към �тека, така че �е промен� �амо той.\n"
+"    \n"
+"     �ргументи:\n"
+"      +N   Превърта �тека, така че N-тата директори� (като �е брои от "
+"л�вата\n"
+"           �трана на �пи�ъка, отпечатан от командата „dirs“ като �е почва от "
+"0)\n"
+"           да е най-отгоре.\n"
+"    \n"
+"      -N   Превърта �тека, така че N-тата директори� (като �е брои от "
+"д��ната\n"
+"           �трана на �пи�ъка, отпечатан от командата „dirs“ като �е почва от "
+"0)\n"
+"           да е най-отгоре.\n"
+"    \n"
+"      dir  Добав� ДИР най-отгоре в �тека на директориите, като � прави "
+"новата\n"
+"           текуща работна директори�.\n"
+"    \n"
+"    Можете да изведете �тека на директори�та � командата „dirs“."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Маха директории от �тека � т�х. Без аргументи премахва по�ледната директори� "
+"в\n"
+"    �тека и влиза в новата по�ледна директори�.\n"
+"    \n"
+"    Опции:\n"
+"      -n  подти�кане на нормалното преминаване към директори� при махането "
+"на\n"
+"          директори� от �тека — �амо той �е промен�.\n"
+"    \n"
+"    �ргументи:\n"
+"      +N  премахва N-ти� елемент като �е брои отл�во в �пи�ъка отпечатан от\n"
+"          командата „dirs“, като �е брои от 0.  �апр.: „popd +0“ премахва\n"
+"          първата директори�, „popd +1“ - втората.\n"
+"    \n"
+"      -N  премахва N-ти� елемент като �е брои отд��но в �пи�ъка отпечатан "
+"от\n"
+"          командата „dirs“, като �е брои от 0.  �апр.: „popd -0“ премахва\n"
+"          по�ледната директори�, „popd -1“ - предпо�ледната.\n"
+"    \n"
+"    Можете да изведете �тека на директори�та � командата „dirs“."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: грешно указване на изтичането на времето"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "грешка при четене: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr ""
+"„return“ е възможен �амо от функци� или изпълнен в текущата обвивка �крипт"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr ""
+"не може едновременно да �е премахват задавани�та на функци� и променлива"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: не е променлива за ма�ив"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: не е функци�"
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr "%s: не може да �е изне�е"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "брой на преме�твани�та"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr ""
+"не може едновременно да �е задават и да �е премахват опции на обвивката"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: грешно име на опци� на обвивката"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "изи�ква �е аргумент име на файл"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: файлът не е открит"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "не може да бъде временно �пр�на"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "входната обвивка не може да бъде временно �пр�на"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s е �иноним на „%s“\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s е ключова дума на обвивката\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s е функци�\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s е �пециална, вградена команда в обвивката\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s е вградена команда в обвивката\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s е %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s е хеширан (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: грешен аргумент за ограничение"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "„%c“: грешна команда"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: ограничението не може да бъде получено: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "ограничение"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: ограничението не може да бъде променено: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "о�мично чи�ло"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "„%c“: неправилен оператор за опи�ателен режим"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "„%c“: неправилен знак за опи�ателен режим"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " ред "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "по�ледна команда: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Преу�танов�ване…"
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr "И�ФОРМ�ЦИЯ: "
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "неизве�тна грешка в команда"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "грешен вид команда"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "грешна връзка"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "грешен преход"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: променлива без �тойно�т"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr ""
+"\aвремето за изчакване на вход изтече: �ледва автоматично излизане от "
+"�и�темата\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "�тандартни�т вход не може да бъде прена�очен от „/dev/null“: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "в променливата $TIMEFORMAT: „%c“: грешен форматиращ знак"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr "execute_coproc: копроце�ът [%d:%s] в�е още �ъще�твува"
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "грешка в програмен канал"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr "eval: превишено е мак�ималното ниво на влагане на „eval“ (%d)"
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr "%s: превишено е мак�ималното ниво на влагане на код (%d)"
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr "%s: превишено е мак�ималното ниво на влагане на функции (%d)"
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr ""
+"%s: ограничение: в имената на командите не може да при�ъ�тва знакът „/“"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: командата не е открита"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: лош интерпретатор"
+
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: двоични�т файл не може да бъде изпълнен: %s"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "„%s“ е вградена команда в обвивката"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "файлови�т де�криптор %d не може да �е дублира като де�криптор %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "мак�имални�т брой нива за рекур�и� в израз б�ха преминати"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "отрицателно препълване на �тека за рекур�ии"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "�интактична грешка в израз"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "опит за при�во�ване на �тойно�т на нещо, което не е променлива"
+
+#: expr.c:530
+msgid "syntax error in variable assignment"
+msgstr "�интактична грешка при при�во�ване на променлива"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "деление на 0"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "програмна грешка: неправилна лек�ема за при�во�ване на израз"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "за у�ловен израз �е изи�ква „:“"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "�тепента е по-малка от 0"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "очаква �е идентификатор �лед предварително увеличаване или намал�ване"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "лип�ва „)“"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "�интактична грешка: очаква �е оператор"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "�интактична грешка: грешен аритметичен оператор"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (грешната лек�ема е „%s“)"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "грешна аритметична о�нова на бройна �и�тема"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: грешен номер на ред"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "�тойно�тта е прекалено гол�ма за о�новата"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: грешка в израза\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: н�ма до�тъп до родител�ките директории"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "не може да �е изчи�ти режимът без забав�не на файлови� де�криптор %d"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr ""
+"не може да �е задели нов файлов де�криптор за вход на bash от де�криптор %d"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr ""
+"запазване на входа на bash: вече �ъще�твува буфер за нови� файлов де�криптор "
+"%d"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr ""
+"�тартиране на програмен канал: не може да �е комуникира � водача на канала\n"
+"(pgrp pipe)"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "�тартирани�т проце� %d е в изпълн�ваната задача %d"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "изтриване на �пр�ната задача %d в групата проце�и %ld"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "добав�не на проце�: проце�ът %5ld (%s) е отбел�зан като още жив"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr ""
+"опи�ателен идентификатор на проце�: %ld: н�ма такъв идентификатор на проце�"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Сигнал %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Завършен"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Спр�н"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Спр�н (%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "Изпълн�ван"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Завършен (%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Изход %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "�епознато �ъ�то�ние"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(паметта е разтоварена)"
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (wd: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "дъщерни�т проце� �мени групата при изпълнение (от %ld на %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "изчакване: проце�ът � идентификатор %ld не е дъщерен на тази обвивка"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "изчакване: лип�ват данни за проце� � идентификатор %ld"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "изчакване на задача: задачата %d е �пр�на"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: н�ма такава задача"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: задачата е приключила"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: задача %d вече е във фонов режим"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr ""
+"изчакване на дъщерен проце�: включване на незабавното излизане от функци�та\n"
+"чрез WNOHANG, за да �е избегне недефиниран блок"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: ред %d: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (паметта е разтоварена)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(работната директори� е: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "инициализаци� на контрола на задачите: неу�пешно изпълнение на getpgrp"
+
+#: jobs.c:4447
+msgid "initialize_job_control: no job control in background"
+msgstr ""
+"инициализаци� на контрола на задачите: н�ма управление на задачите във фонов "
+"режим"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "инициализаци� на контрола на задачите: ди�циплина на лини�та"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr ""
+"инициализаци� на контрола на задачите: задаване на група при изпълнение "
+"(setpgid)"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "групата на проце�ите на терминала не може да бъде зададена (%d)"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "в тази обвивка н�ма управление на задачите"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "задел�не на памет: грешно предположение: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"задел�не на памет: %s:%d: предположението е отпечатано\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "непознат"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr ""
+"задел�не на памет: блок в �пи�ъка �ъ� �вободни блокове е зает или неподход�щ"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr ""
+"изчи�тване на памет: извикано е � блоков аргумент, който вече е изчи�тен"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "изчи�тване на памет: извикано е � незаделен блоков аргумент"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr ""
+"изчи�тване на памет: открито е отрицателно препълване � mh_nbytes извън\n"
+"допу�тими� диапазон"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr ""
+"изчи�тване на памет: открито е отрицателно препълване � mh_nbytes извън\n"
+"допу�тими� диапазон"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr ""
+"изчи�тване на памет: къ�овете на началната и крайната обла�ти �е различават"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "презадел�не: извикано е � аргумент � незаделен блок"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr ""
+"презадел�не: открито е отрицателно препълване � mh_nbytes извън допу�тими�\n"
+"диапазон"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr ""
+"презадел�не: открито е отрицателно препълване � mh_nbytes извън допу�тими�\n"
+"диапазон"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "презадел�не: къ�овете на началната и крайната обла�ти �е различават"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr ""
+"реги�триране на презадел�не: таблицата за задел�ни�та е пълна � FIND_ALLOC?\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "реги�триране на презадел�не: %p вече е в таблицата като заделен?\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "реги�триране на �вободни: %p вече е в таблицата като �вободен?\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "грешна о�нова на бройна �и�тема"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: непознат хо�т"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: неправилна у�луга"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: неправилно указан мрежов път"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "не �е поддържат мрежови операции"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: локалът не може да бъде �менен (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: локалът не може да бъде �менен (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: локалът не може да бъде �менен (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: локалът не може да бъде �менен (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "Имате поща в $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "Имате нова поща в $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "Пощата в %s вече е прочетена\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "�интактична грешка: изи�ква �е аритметичен израз"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "�интактична грешка: неочакван знак „;“"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "�интактична грешка: „((%s))“"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "вътрешен документ � „<<“: неправилен вид ин�трукци� %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr ""
+"вътрешни�т документ на ред %d е отделен �ъ� знак за нов ред (а тр�бва да е "
+"„%s“)"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr ""
+"прена�очване: ин�трукци�та за прена�очване „%d“ е извън допу�тими� диапазон"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+"shell_getc: shell_input_line_size (%zu) надвишава SIZE_MAX (%lu): редът е "
+"отр�зан"
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr "превишен е мак�имални�т брой възможни вътрешни документи"
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr ""
+"неочакван знак за край на файл „EOF“, а �е очакваше �ъответ�тващ знак „%c“"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "неочакван знак за край на файл „EOF“, а �е очакваше „]]“"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "�интактична грешка в у�ловен израз: неочаквана лек�ема „%s“"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "�интактична грешка в у�ловен израз"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "неочаквана лек�ема „%s“, а �е очакваше знакът „)“"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "очакваше �е „)“"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "неочакван аргумент „%s“ за унарен у�ловен оператор"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "неочакван аргумент за унарен у�ловен оператор"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "неочаквана лек�ема „%s“, очакваше �е бинарен у�ловен оператор"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "очакваше �е бинарен у�ловен оператор"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "неочакван аргумент „%s“ за бинарен у�ловен оператор"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "неочакван аргумент за бинарен у�ловен оператор"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "неочаквана лек�ема „%c“ в у�ловна команда"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "неочаквана лек�ема „%s“ в у�ловна команда"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "неочаквана лек�ема %d в у�ловна команда"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "�интактична грешка в близо�т до неочакваната лек�ема „%s“"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "�интактична грешка в близо�т до „%s“"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "�интактична грешка: неочакван край на файл"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "�интактична грешка"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Използвайте „%s“, за да излезете от обвивката.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "неочакван знак за край на файл „EOF“, очакваше �е знакът „)“"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "допи�ване: функци�та „%s“ не е открита"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr "programmable_completion: %s: възможно зацикл�не на повторните опити"
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr ""
+"вмъкване на завършване на команда: %s указване на команда, което е NULL"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "команда за печат: лош конектор „%d“"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: грешен файлов де�криптор"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: указател към файл – NULL"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != fileno xtrace fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "отпечатване: „%c“: неправилен форматиращ знак"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "файлови�т де�криптор е извън допу�тими� диапазон"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: дву�ми�лено прена�очване"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: не може да �е презапише �ъще�твуващ файл"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: поради ограничение изходът не може да �е прена�очи"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "не може да �е �ъздаде временен файл за вътрешен документ: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: на променлива не може да �е при�вои файлов де�криптор"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr ""
+"„/dev/(tcp|udp)/host/port“ не �е поддържат, ако н�ма поддръжка на мрежа"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "грешка при прена�очване: файлови�т де�криптор не може да бъде дублиран"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "не е открита директори�та „/tmp“. Създайте �!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "„/tmp“ тр�бва да е директори�"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr "режимът за кра�ив изход �е игнорира при интерактивна работа"
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: неправилна опци�"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr ""
+"идентификаторът на потребител на проце�а не може да �е зададе да е %d,\n"
+"ефективни�т идентификатор на потребител на проце�а е %d"
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr ""
+"идентификаторът на група на проце�а не може да �е зададе да е %d,\n"
+"ефективни�т идентификатор на група на проце�а е %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr "режимът на изчи�тване на грешки е недо�тъпен, защото е изключен"
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr "%s: е директори�"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "�е може да �е получи името на текущи� потребител!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, вер�и� %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Употреба:    %s [дълга опци� на GNU] [опци�]…\n"
+"             %s [дълга опци� на GNU] [опци�] файл-�крипт…\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "Дълги опции на GNU:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Опции на обвивката:\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr ""
+"    -ilrsD или -c команда, или -O къ�а_опци�        (�амо при �тартиране)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "    -%s или -o опци�\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+"За повече информаци� за опциите на обвивката въведете „%s -c \"help set\"“.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr ""
+"За повече информаци� за вградените в обвивката команди въведете „%s -c "
+"help“.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "За да докладвате грешки, използвайте командата „bashbug“.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr "Интернет �траница на bash: <http://www.gnu.org/software/bash>\n"
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr "Обща помощ за програмите на GNU: <http://www.gnu.org/gethelp/>\n"
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "ма�ка за обработката на �игнали: %d: грешна операци�"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Фалшив �игнал"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Прекъ�ване на връзката"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Прекъ�ване"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Спиране"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "�еправилна ин�трукци�"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "Капан за авариен изход чрез BPT"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "Ин�трукци� за прекрат�ване"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "Капан � EMT"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Изключение от плаваща запета�"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Убит"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Грешка в шината"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Грешка в раздел�нето"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Грешно �и�темно извикване"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Прекъ�нат програмен канал"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "�ларма"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Прекратен"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Спешно вх./изх. �ъ�то�ние"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Спр�н (�игнал)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Продължаване"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Смърт или �пиране на дъщерен проце�"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Спиране (вход от tty)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Спиране (изход към tty)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "Готовно�т за вх./изх."
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "Ограничение на проце�ора"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "Ограничение на файловете"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "�ларма (виртуална)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "�ларма (по профил)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Преоразмерен прозорец"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Заключен запи�"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Потребител�ки �игнал 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Потребител�ки �игнал 2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "Идват данни по конзола HFT"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "Пред�тои �пиране на захранването"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "Пред�тои забиване на �и�темата"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "Преме�тване на проце�а на друг проце�ор"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "Програмна грешка"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "Дадено право за управление чрез конзола HFT"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "Отнето право за управление чрез конзола HFT"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "Завършена звукова поредица през HFT"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "За�вка за информаци�"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "�епознат �игнал #%d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "лошо заме�тване: лип�ва затвар�щ знак „%s“ в %s"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: на член от ма�ив не може да �е при�вои �пи�ък"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "не може да �е �ъздаде програмен канал за заме�тване на проце�и"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "не може да �е �ъздаде дъщерен проце� за заме�тване на проце�и"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "именувани�т програмен канал %s не може да �е отвори за четене"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "именувани�т програмен канал %s не може да �е отвори за запи�"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr ""
+"именувани�т програмен канал %s не може да �е\n"
+"дублира като файлови� де�криптор %d"
+
+#: subst.c:6213
+msgid "command substitution: ignored null byte in input"
+msgstr "заме�тване на команди: знакът „null“ във входа е пре�кочен"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "не може да �е �ъздаде програмен канал за заме�тване на команди"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "не може да �е �ъздаде дъщерен проце� за заме�тване на команди"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "заме�тване на команди: каналът не може да �е дублира като fd 1"
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: неправилно име за променлива-указател"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: грешно непр�ко заме�тване"
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr "„%s“: грешно име на променлива"
+
+#: subst.c:7256
+#, c-format
+msgid "%s: parameter not set"
+msgstr "%s: аргументът не е зададен"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: аргументът е „null“ или не е зададен"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: изразът от подниза е < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: лошо заме�тване"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: не може да �е задава по този начин"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+"бъдещите вер�ии на обвивката ще използват изчи�л�ване като аритметично\n"
+"заме�тване"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "лошо заме�тване: лип�ва затвар�щ знак „`“ в %s"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "н�ма �ъвпадение: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "очаква �е аргумент"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: очаква �е целочи�лен израз"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "очаква �е „)“"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "очаква �е „)“, а е получено %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: очаква �е бинарен оператор"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: очаква �е унарен оператор"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "лип�ва „]“"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "�интактична грешка: неочакван знак „;“"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "неправилен номер на �игнал"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr "eval: превишено е мак�ималното ниво на влагане на „eval“ (%d)"
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr ""
+"�тартиране на пред�то�щите прихващани�: неправилна �тойно�т в\n"
+"trap_list[%d]: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"�тартиране на пред�то�щите прихващани�: обработката на �игнали е SIG_DFL.\n"
+"%d (%s) е преизпратен на текущата обвивка"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "обработка на прихващани�: неправилен �игнал %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "грешка при вна��нето на дефиници�та на функци� за „%s“"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "нивото на обвивката (%d) е прекалено гол�мо. Задава �е да е 1"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr ""
+"�ъздаване на локална променлива: лип�ва контек�т на функци� в текущата "
+"обла�т\n"
+"на видимо�т"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: на тази променлива не може да �е при�вои �тойно�т"
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr "%s: при�во�ване на чи�ло на променлива-указател"
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr ""
+"в�ички локални променливи: лип�ва контек�т на функци� в текущата обла�т на\n"
+"видимо�т"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s: аргументът за низа за изна��не не тр�бва да е „null“"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "неправилен знак на позици� %d в низа за изна��не за %s"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "лип�ва „=“ в низа за изна��не за %s"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr ""
+"изваждане на контек�т на променливи: в началото на �труктурата за променливи "
+"на\n"
+"обвивката (shell_variables) е нещо, което не е контек�т на функци�"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr ""
+"изваждане на контек�т на променливи: лип�ва контек�т за глобални променливи\n"
+"(global_variables)"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr ""
+"изваждане на обла�т: в началото на �труктурата за променливи на обвивката\n"
+"(shell_variables)  е нещо, което не е временна обла�т в обкръжението"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s не може да �е отвори като Ф�ЙЛ"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: грешен файлов де�криптор за файла за тра�иране"
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s: е извън допу�тими� диапазон"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "�втор�ки права © 2018 Free Software Foundation, Inc."
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"Лиценз GPLv3+: ОПЛ на GNU, вер�и� 3 или по-ви�ока <http://gnu.org/licenses/"
+"gpl.html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, вер�и� %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr "Това е �вободен �офтуер. Можете да го промен�те и разпро�тран�вате."
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "��ма �ИК�КВИ Г�Р��ЦИИ до �тепента позволена от закона."
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: не могат да �е задел�т %lu байта (заделени �а %lu байта)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: не могат да �е задел�т %lu байта"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: не могат да �е задел�т %lu байта (заделени �а %lu байта)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: не могат да �е задел�т %lu байта"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [ИМЕ[=СТОЙ�ОСТ]…]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] ИМЕ [ИМЕ…]"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpsvPSVX] [-m ПОДРЕДБ�_��_КЛ�ВИ�ТУР�Т�] [-f ИМЕ_��_Ф�ЙЛ]\n"
+"     [-q ИМЕ] [-u ИМЕ] [-r ПОСЛЕДОВ�ТЕЛ�ОСТ_ОТ_КЛ�ВИШИ]\n"
+"     [-x ПОСЛЕДОВ�ТЕЛ�ОСТ_ОТ_КЛ�ВИШИ:КОМ��Д�_��_ОБВИВК�Т�]\n"
+"     [ПОСЛЕДОВ�ТЕЛ�ОСТ_ОТ_КЛ�ВИШИ:КОМ��Д�_��_ОБВИВК�Т� или "
+"КОМ��Д�_��_READLINE]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [БРОЙ]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [БРОЙ]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [ВГР�ДЕ��_КОМ��Д� [�РГУМЕ�Т…]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [ИЗР�З]"
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]] [-@]] [ДИРЕКТОРИЯ]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] команда [�РГУМЕ�Т…]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilnrtux] [-p] [ИМЕ[=СТОЙ�ОСТ]…]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilnrtux] [-p] ИМЕ[=СТОЙ�ОСТ]…"
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [ОПЦИЯ] ИМЕ[=СТОЙ�ОСТ]…"
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [�РГУМЕ�Т…]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [�РГУМЕ�Т…]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f Ф�ЙЛ] [�РГУМЕ�Т…]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [�РГУМЕ�Т…]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts �ИЗ_С_ОПЦИИ ИМЕ [�РГУМЕ�Т]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a ИМЕ] [КОМ��Д� [�РГУМЕ�ТИ…]] [ПРЕ��СОЧВ��Е…]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [ЦИФРОВ_КОД]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [ЦИФРОВ_КОД]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr ""
+"fc [-e РЕД�КТОР] [-lnr] [ПЪРВИ] [ПОСЛЕДЕ�] или fc -s [Ш�БЛО�=З�МЕСТИТЕЛ…] "
+"[КОМ��Д�]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [З�Д�Ч�]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [З�Д�Ч�…]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p ПЪТ] [-dt] [ИМЕ…]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [Ш�БЛО�…]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d ОТМЕСТВ��Е] [БРОЙ] или \n"
+"history -anrw [ИМЕ_��_Ф�ЙЛ] или\n"
+"history -ps �РГ [�РГ…]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [ИД_З�Д�Ч�…] или jobs -x КОМ��Д� [�РГУМЕ�ТИ]"
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [ИД_З�Д�Ч�… | ИД_ПРОЦЕС…]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s СИГ��Л | -n �ОМЕР_��_СИГ��Л | -СИГ��Л] ИД_ПРОЦЕС | ИД_З�Д�Ч�…\n"
+"или\n"
+"kill -l [СИГ��Л]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let �РГУМЕ�Т [�РГУМЕ�Т…]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a М�СИВ] [-d Р�ЗДЕЛИТЕЛ] [-i ТЕКСТ] [-n БРОЙ_З��ЦИ]\n"
+"     [-N БРОЙ_З��ЦИ] [-p ПОДСК�ЗК�] [-t БРОЙ_З��ЦИ] [-u Ф�ЙЛОВ_ДЕСКРИПТОР]\n"
+"     [ИМЕ…]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [ЦИФРОВ_КОД]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o ОПЦИЯ] [--] [�РГУМЕ�ТИ…]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [ИМЕ…]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [ИМЕ[=СТОЙ�ОСТ]…] или export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [ИМЕ[=СТОЙ�ОСТ]…] или readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [БРОЙ]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source Ф�ЙЛ [�РГУМЕ�ТИ]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". Ф�ЙЛ [аргументи]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [ИЗР�З]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ �РГУМЕ�Т…]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[�РГУМЕ�Т] СИГ��Л…]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] ИМЕ [ИМЕ…]"
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [ОГР��ИЧЕ�ИЕ]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [М�СК�]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-fn] [ИД…]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [ИД_ПР…]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for ИМЕ [in ДУМИ…] ; do КОМ��ДИ; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( ИЗР�З_1; ИЗР�З_2; ИЗР�З_3 )); do КОМ��ДИ; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select ИМЕ [in ДУМИ…;] do КОМ��ДИ; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] ПРОГР�МЕ�_К���Л"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case ДУМ� in [Ш�БЛО� [| Ш�БЛО�]…) КОМ��ДИ ;;]… esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if КОМ��ДИ; then КОМ��ДИ; [ elif КОМ��ДИ; then КОМ��ДИ; ]… [ else КОМ��ДИ; ] "
+"fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while КОМ��ДИ; do КОМ��ДИ; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until КОМ��ДИ; do КОМ��ДИ; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [ИМЕ] КОМ��Д� [ПРЕ��СОЧВ��ИЯ]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function name { КОМ��ДИ ; } или name () { КОМ��ДИ ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ КОМ��ДИ ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "%З�Д�Ч� [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( ИЗР�З ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ ИЗР�З ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "variables имена и значение на н�кои от променливите на обвивката"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | ДИР]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [ОПЦИЯ…]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v ПРОМЕ�ЛИВ�] ФОРМ�Т [�РГУМЕ�ТИ]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o ОПЦИЯ] [-A ДЕЙСТВИЕ]\n"
+"         [-G Ш�БЛО�] [-W ДУМИ] [-F ФУ�КЦИЯ] [-C КОМ��Д�] [-X ФИЛТЪР]\n"
+"         [-P ПРЕДСТ�ВК�] [-S ��СТ�ВК�] [ИМЕ…]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o ОПЦИЯ] [-A ДЕЙСТВИЕ] [-G Ш�БЛО�]\n"
+"        [-W ДУМИ] [-F ФУ�КЦИЯ] [-C КОМ��Д�] [-X ФИЛТЪР] [-P ПРЕДСТ�ВК�]\n"
+"        [-S ��СТ�ВК�] [ДУМ�]"
+
+#: builtins.c:239
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o ОПЦИЯ] [-DEI] [ИМЕ…]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-d Р�ЗДЕЛИТЕЛ] [-n БРОЙ] [-O ��Ч�ЛО] [-s БРОЙ] [-t]\n"
+"        [-u Ф�ЙЛ_ДЕСКР] [-C ФУ�КЦИЯ] [-c КВ��Т] [М�СИВ]"
+
+#: builtins.c:244
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-d Р�ЗДЕЛИТЕЛ] [-n БРОЙ] [-O ��Ч�ЛО] [-s БРОЙ] [-t]\n"
+"          [-u Ф�ЙЛ_ДЕСКР] [-C ФУ�КЦИЯ] [-c КВ��Т] [М�СИВ]"
+
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Дефиниране или извеждане на �иноними.\n"
+"    \n"
+"    „alias“ без аргументи или � опци�та „-p“ отпечатва �пи�ъка �ъ�\n"
+"    �инонимите във формат „ИМЕ=СТОЙ�ОСТ“ на �тандартни� изход.\n"
+"    \n"
+"    В противен �лучай за в��ко ИМЕ, за което е зададена �тойно�т, �е\n"
+"    дефинира �иноним.  Интервал в кра� на СТОЙ�ОСТ-та предизвиква �инонимно\n"
+"    заме�тване на �ледващата дума при заме�тването на �инонима.\n"
+"    \n"
+"    Опции:\n"
+"      -p  Извежда в�ички �иноними във формат за по�ледващо използване\n"
+"    \n"
+"    Изходен код:\n"
+"    alias връща 0, о�вен в �лучаите, когато �е зададе ИМЕ, за което\n"
+"    не е дефиниран �иноним."
+
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Премахване на ИМЕната от �пи�ъка � дефинираните �иноними.\n"
+"    \n"
+"    Опции:\n"
+"      -a  премахване на в�ички �иноними.\n"
+"    \n"
+"    Изходен код:\n"
+"    Връща 0, о�вен в �лучаите, когато �е зададе ИМЕ, за което\n"
+"    не е дефиниран �иноним."
+
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"Задаване на клавишни комбинации и променливи на readline.\n"
+"    \n"
+"    При�во�ване на по�ледователно�т от клавиши на функци� или макро� от\n"
+"    readline или задаване на променлива на readline.  Синтак�и�ът �\n"
+"    аргументи без опции е еквивалентен на този във файла „~/.inputrc“, но\n"
+"    тр�бва да �е подаде като един�твен аргумент.  �апр:\n"
+"    bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Опции:\n"
+"      -m  ПОДРЕДБ�    \n"
+"              Използване на ПОДРЕДБ�та като подредба на функциите на "
+"клавишите\n"
+"              докато командата �е изпълн�ва.  Валидни �а �ледните имена:\n"
+"              „emacs“, „emacs-standard“, „emacs-meta“, „emacs-ctlx“, „vi“,\n"
+"              „vi-move“, „vi-command“ и „vi-insert“.\n"
+"      -l      Спи�ък � имената на функциите.\n"
+"      -P      Спи�ък � имената на функциите и при�во�вани�та.\n"
+"      -p      Спи�ък � имената на функциите и при�во�вани�та във вид, който "
+"може\n"
+"              да �е използва за вход.\n"
+"      -S      Спи�ък � клавишните по�ледователно�ти, които извикват макро�и "
+"и\n"
+"              �тойно�тите им.\n"
+"      -s      Спи�ък � клавишните по�ледователно�ти, които извикват макро�и "
+"и\n"
+"              �тойно�тите им във вид, който може да �е използва за вход.\n"
+"      -V      Спи�ък � имената на променливите и �тойно�тите им.\n"
+"      -v      Спи�ък � имената на променливите и �тойно�тите им във вид, "
+"който\n"
+"              може да �е използва за вход.\n"
+"      -q  ИМЕ_��_ФУ�КЦИЯ\n"
+"              Проверка кои клавиши извикват функци�та � това име.\n"
+"      -u  ИМЕ_��_ФУ�КЦИЯ\n"
+"              Премахване на при�во�вани�та към в�ички клавиши на функци�та "
+"�\n"
+"              това име.\n"
+"      -r  КЛ�ВИШ��_ПОСЛЕДОВ�ТЕЛ�ОСТ\n"
+"              Премахване на при�воената функци� от "
+"КЛ�ВИШ��та_ПОСЛЕДОВ�ТЕЛ�ОСТ.\n"
+"      -f  Ф�ЙЛ\n"
+"              Прочитане на при�во�вани�та на клавиши от Ф�ЙЛа.\n"
+"      -x  КЛ�ВИШ��_ПОСЛЕДОВ�ТЕЛ�ОСТ:КОМ��Д�_��_ОБВИВК�Т�\n"
+"               Изпълнение на КОМ��Д�та_��_ОБВИВК�Т� при въвеждането на\n"
+"               КЛ�ВИШ��та_ПОСЛЕДОВ�ТЕЛ�ОСТ.\n"
+"      -X  Извеждане на клавишните комбинации зададени � „-x“ и �вързаните � "
+"т�х\n"
+"               команди във форма, ко�то може да �е ползва и за вход\n"
+"    \n"
+"    Изходен код:\n"
+"    bind връща 0, о�вен когато е зададена непозната опци� или възникне "
+"грешка."
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Изход от цикли чрез „for“, „while“ или „until“.\n"
+"    \n"
+"    Изход от цикли организирани чрез „for“, „while“ или „until“.  �ко е "
+"зададен\n"
+"    БРОЙ �е излиза от толкова на БРОЙ обхващащи цикли.\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен ако е зададен БРОЙ, който е по-малък от 1."
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Продължаване на цикъл  чрез „for“, „while“ или „until“.\n"
+"    \n"
+"    Продължаване �ъ� �ледващата итераци� от цикъл, организиран � „for“, "
+"„while“\n"
+"    или „until“.  �ко е зададен БРОЙ,  �е продължава �ъ� �ледващата "
+"итераци�\n"
+"    на обхващащи� цикъл зададен � този БРОЙ.\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен ако е зададен БРОЙ, който е по-малък от 1."
+
+#: builtins.c:354
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Изпълнение на вградени команди.\n"
+"    \n"
+"    Изпълнение на ВГР�ДЕ��та_КОМ��Д� � �РГУМЕ�Ти, без да �е тър�и нормална\n"
+"    команда.  Това е полезно в �лучаите, когато и�кате да �ъздадете "
+"вградена\n"
+"    команда като функци� на обвивката, но във функци�та и�кате да изпълните\n"
+"    вградената команда.\n"
+"    \n"
+"    Изходен код:\n"
+"    Връща изходни� код на ВГР�ДЕ��та_КОМ��Д� или лъжа, ако извиканата \n"
+"    ВГР�ДЕ��_КОМ��Д� в�ъщно�т не е вградена команда."
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Връщане на контек�та на текущото извикване на подпрограма.\n"
+"    \n"
+"    Без ИЗР�З връща „$line $filename“.  С ИЗР�З връща\n"
+"    „$line $subroutine $filename“.  Допълнителната информаци� може да �е\n"
+"    използва за получаване на информаци� за �ъ�то�нието на �тека.\n"
+"    \n"
+"    Стойно�тта на ИЗР�За показва за колко рамки �пр�мо текущата да �е "
+"изведе\n"
+"    информаци�.  �ай-горната рамка е 0.\n"
+"    \n"
+"    Изходен код:\n"
+"    Връща 0, о�вен ако обвивката изпълн�ва функци� дефинирана в обвивката "
+"или\n"
+"    ИЗР�Зът е грешен."
+
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"См�на на работната директори� на обвивката.\n"
+"    \n"
+"    См�на на текущата директори� да е ДИРЕКТОРИЯ.  Променливата „HOME“ е\n"
+"    �тандартната директори�.\n"
+"    \n"
+"    Променливата „CDPATH“ определ� път� за тър�ене на директории, които "
+"могат да\n"
+"    �ъдържат ДИРЕКТОРИЯта.  Директориите в „CDPATH“ �а разделени � „:“. \n"
+"    Лип�ващо име на директори� означава текущата директори�, т.е. „.“. �ко "
+"името\n"
+"    на ДИРЕКТОРИЯта започва � наклонена черта „/“, „CDPATH“ не �е ползва.\n"
+"    \n"
+"    �ко директори�та не е открита, но е зададена опци�та на обвивката\n"
+"    „cdable_vars“, то думата �е пробва като име на променлива.  �ко "
+"променливата\n"
+"    има �тойно�т, то директори�та �е �мен� към �тойно�тта на тази "
+"променлива.\n"
+"    \n"
+"    Опции:\n"
+"      -L  налага �ледването на �имволните връзки.  Символните връзки в\n"
+"          ДИРЕКТОРИЯта �е обработват �лед указателите към горна директори� "
+"„..“.\n"
+"      -P  налага използването на фактиче�ката подредба на директориите, "
+"вме�то\n"
+"          да �е �ледват �имволните връзки.  Символните връзки в ДИРЕКТОРИЯта "
+"�е\n"
+"          обработват �лед указателите към горна директори� „..“.\n"
+"      -e  ако е използвана опци�та „-P“ и текущата директори� не може да "
+"бъде\n"
+"          определена, командата завършва � ненулев изход.\n"
+"      -@  на �и�темите � поддръжка на разширени атрибути файлът �е "
+"пред�тав�\n"
+"          като директори�, в ко�то �а атрибутите.\n"
+"     \n"
+"    Стандартно �имволните връзки �е �ледват, в�е едно е зададена опци�та „-"
+"L“\n"
+"    \n"
+"    Изходен код:\n"
+"    Връща 0 при �м�на на директори�та.  Когато е зададена опци�та „-P“, 0 "
+"�е\n"
+"    връща при у�пешно задаване на променливата „PWD„.  Във в�ички о�танали\n"
+"    �лучаи изходът е ненулев."
+
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"Извеждане на името на текущата работна директори�.\n"
+"    \n"
+"    Опции:\n"
+"      -L  извежда �тойно�тта на променливата „PWD“, ако т� �ъответ�тва на\n"
+"          текущата директори�\n"
+"      -P  извежда физиче�ката директори� без �имволни връзки\n"
+"    \n"
+"    Стандартно поведението на „pwd“ без аргументи �ъответ�тва на „-L“.\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен ако е подадена неправилна опци� или текущата директори� не може "
+"да\n"
+"    бъде прочетена."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"�улева команда.\n"
+"    \n"
+"    Без ефект — командата нищо не прави.\n"
+"    \n"
+"    Изходен код:\n"
+"    Винаги завършва у�пешно."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Връщане на у�пешен резултат.\n"
+"    \n"
+"    Изходен код:\n"
+"    Винаги завършва у�пешно."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Връщане на неу�пешен резултат.\n"
+"    \n"
+"    Изходен код:\n"
+"    Винаги завършва неу�пешно."
+
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Изпълнение на нормална команда или извеждане на информаци� за команди.\n"
+"    \n"
+"    Изпълнение на КОМ��Д�та � �РГументи, без т� да �е тър�и като функци� на\n"
+"    обвивката, или извеждане на информаци� за указаните КОМ��Ди.  Може да "
+"�е\n"
+"    използва за изпълнението на външни команди, дори когато �ъще�твува "
+"функци�\n"
+"    �ъ� �ъщото име.\n"
+"    \n"
+"    Опции:\n"
+"      -p  използване на �тандартна �тойно�т на PATH.  Така могат да �е "
+"откри�т\n"
+"          в�ички �тандартни ин�трументи\n"
+"      -v  извежда опи�ание на КОМ��Д�та подобно на вградената команда "
+"„type“\n"
+"      -V  извежда по пълно опи�ание на в��ка КОМ��Д�\n"
+"    \n"
+"    Изходен код:\n"
+"    Връща изходни� код на КОМ��Д�та или грешка, ако такава не е открита."
+
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"Задаване на �тойно�ти на променливите и атрибутите.\n"
+"    \n"
+"    Деклариране на променливи и задаване на атрибутите им.  �ко не �а "
+"дадени\n"
+"    ИМЕна �е изобраз�ват атрибутите и �тойно�тите на в�ички променливи.\n"
+"    \n"
+"    Опции:\n"
+"      -f    Ограничаване на дей�твието или извеждането до имената и "
+"дефинициите\n"
+"            на функциите\n"
+"      -F    Ограничаване на извеждането �амо до имената на функциите, заедно "
+"�\n"
+"            номерата на редовете и изходните файлове при изчи�тване на "
+"грешките\n"
+"      -g    Създаване на глобална променлива, когато опци�та е употребена "
+"във\n"
+"            функци�.  В противен �лучай �е пренебрегва\n"
+"      -p    Извеждане на атрибутите и �тойно�тта на в��ко ИМЕ\n"
+"    \n"
+"    Опции за задаването на атрибути:\n"
+"      -a    ИМЕната да �а на индек�ирани ма�иви (ако �е поддържат)\n"
+"      -A    ИМЕната да �а а�оциативни ма�иви  (ако �е поддържат)\n"
+"      -i    ИМЕната да �а � атрибут „ц�ло чи�ло“\n"
+"      -l    При при�во�ване на �тойно�т т� да �е преобразува в малки букви\n"
+"      -n    ИМЕто да е указател към променливата � име, което е дадено от\n"
+"            �тойно�тта\n"
+"      -r    ИМЕната да �а �амо за четене\n"
+"      -t    ИМЕната да �а � атрибут за тра�иране\n"
+"      -u    При при�во�ване на �тойно�т т� да �е преобразува в главни букви\n"
+"      -x    ИМЕната да �е изна��т към �редата\n"
+"    \n"
+"    При използването на „+“ вме�то „-“ атрибутът �е изключва.\n"
+"    \n"
+"    При при�во�ването на �тойно�т на променлива �ъ� зададен атрибут за ц�ло\n"
+"    чи�ло �е извършва аритметично изчи�л�ване (вижте командата „let“).\n"
+"    the `let' command).\n"
+"    \n"
+"    Когато �е използва във функци�, командата „declare“ прави ИМЕната "
+"локални,\n"
+"    в�е едно �е изпълн�ва командата „local“.  Опци�та „-g“ предотврат�ва "
+"това\n"
+"    поведение.\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен ако е зададена неправилна опци� или възникне грешка при "
+"задаването\n"
+"    на �тойно�т на променлива."
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"Задаване на �тойно�т и атрибути на променливи.\n"
+"    \n"
+"    Синоним на „declare“.  Виж „help declare“."
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Дефиниране на локални променливи.\n"
+"    \n"
+"    Създаване на локална променлива � това ИМЕ и зададената СТОЙ�ОСТ.  "
+"ОПЦИЯта\n"
+"    може да е в��ка приемана от вградената команда „declare“.\n"
+"    \n"
+"    Локалните променливи могат да �е използват �амо във функци�.  Те �а "
+"видими\n"
+"    �амо в не� и нейните на�ледници.\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен ако е зададена неправилна ОПЦИЯ, възникне грешка при задаването "
+"на\n"
+"    �тойно�т на променлива, или в момента не �е изпълн�ва функци�."
+
+#: builtins.c:557
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Извеждане на аргументите на �тандартни� изход.\n"
+"    \n"
+"    Извеждане на �РГУМЕ�Тите на �тандартни� изход разделени � интервали и\n"
+"    по�ледвани от нов ред.\n"
+"    \n"
+"    Опции:\n"
+"      -n  не �е извежда знак за нов ред.\n"
+"      -e  включва �е интерпретирането на знаците, изброени по-долу,  "
+"екранирани\n"
+"           � обратна наклонена черта — „\\“\n"
+"      -Е  изрично �е �пира интерпретирането на долните знаци\n"
+"    \n"
+"    „echo“ поддържа �ледните екранирани знаци:\n"
+"      \\a  �и�темен звънец\n"
+"      \\b  триене назад\n"
+"      \\c  пропу�кане на знака за нов ред\n"
+"      \\e  знак за екраниране\n"
+"      \\E  знак за екраниране\n"
+"      \\f  знак „Завършване на формул�ра“ (form feed)\n"
+"      \\n  знак за нов ред\n"
+"      \\r  знак „Връщане на каретката“ (carriage return)\n"
+"      \\t  хоризонтална табулаци�\n"
+"      \\v  вертикална табулаци�\n"
+"      \\\\  обратно наклонена черта\n"
+"      \\0nnn\n"
+"          знакът � код в ASCII NNN (в о�мична бройна �и�тема).\n"
+"          NNN може да �е �ъ�тои от 1 до 3 о�мични цифри.\n"
+"      \\xHH\n"
+"          знакът � код в ASCII HH (в ше�тнай�етична бройна �и�тема).\n"
+"          HH може да �е �ъ�тои от 1 до 2 ше�тнай�етични цифри.\n"
+"      \\uHHHH\n"
+"          знакът � код в Unicode HHHH (в ше�тнай�етична бройна �и�тема).\n"
+"          HHHH може да �е �ъ�тои от 1 до 4 ше�тнай�етични цифри.\n"
+"      \\UHHHHHHHH\n"
+"          знакът � код в Unicode HHHHHHHH (в ше�тнай�етична бройна "
+"�и�тема).\n"
+"          HHHHHHHH може да �е �ъ�тои от 1 до 8 ше�тнай�етични цифри.\n"
+"    \n"
+"    Изходен код:\n"
+"    Връща 0, о�вен ако не възникне грешка при извеждането."
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Извеждане на аргументите на �тандартни� изход.\n"
+"    \n"
+"    Извеждане на �РГументите на �тандартни� изход по�ледвани от знак за нов "
+"ред.\n"
+"    \n"
+"    Опции:\n"
+"      -n        без извеждане на знак за нов ред\n"
+"    \n"
+"    Изходен код:\n"
+"    Връща 0, о�вен ако възникне грешка при извеждането."
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"Включване и изключване на вградените в обвивката команди.\n"
+"    \n"
+"    Включване и изключване на командите вградени в обвивката.  Изключването\n"
+"    позвол�ва извикването на външна команда �ъ� �ъщото име като вградена "
+"без\n"
+"    използването на пълното име � път�.\n"
+"    \n"
+"    Опции:\n"
+"      -a    Извеждане на �пи�ъка � вградените команди заедно � това дали �а\n"
+"            включени или не\n"
+"      -n    Изключване на вградените команди � по�очените ИМЕна.  �ко не �а\n"
+"            дадени ИМЕна, �е извежда �пи�ъкът � изключените вътрешни "
+"команди\n"
+"      -p    Извеждане на �пи�ъка � вътрешни команди във формат, който може "
+"да\n"
+"            �е ползва като вход\n"
+"      -s    Извеждане �амо на имената на �пециалните вградени команди "
+"�поред\n"
+"            POSIX\n"
+"    \n"
+"    Опции за динамичното зареждане:\n"
+"      -f    Зареждане на вградена команда � това ИМЕ от �поделени� обект в\n"
+"            по�очени� Ф�ЙЛ\n"
+"      -d    Премахване на вътрешна команда заредена � „-f“\n"
+"    \n"
+"    �ко не �а зададени опции, в��ка от вътрешните команди � такова ИМЕ бива\n"
+"    включена.\n"
+"    \n"
+"    За да ползвате командата „test“, ко�то �е намира в път� за изпълнение "
+"$PATH,\n"
+"    вме�то вградени� в обвивката вариант изпълнете: „enable -n test“.\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен ако ИМЕто не е на вградена команда или не възникне грешка."
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Изпълнение на аргументите като команда на обвивката.\n"
+"    \n"
+"    Комбинира �РГументите в общ низ, който �е подава като вход на обвивка,\n"
+"    ко�то изпълн�ва получените команди.\n"
+"    \n"
+"    Изходен код:\n"
+"    Връща изходни� код на командата или код за у�пех, ако командата е нулева."
+
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"�нализиране на опциите и аргументите.\n"
+"    \n"
+"    getopts �е използва от процедурите на обвивката за анализа на "
+"позиционните\n"
+"    аргументи и опции.\n"
+"    \n"
+"    �ИЗът_С_ОПЦИИ �ъдържа знаците, които тр�бва да �е разпознават като "
+"опции.\n"
+"    �ко буквата е �ледвана от двоеточие, очаква �е опци�та да получава "
+"аргумент,\n"
+"    който да е разделен от не� � интервал(и).\n"
+"    \n"
+"    При в��ко извикване „getopts“ по�тав� �ледващата опци� в променливата "
+"на\n"
+"    обвивката „name“, като � инициализира, ако т� не �ъще�твува, а индек�ът "
+"на\n"
+"    �ледващи� аргумент, който тр�бва да �е обработи, в променливата на "
+"обвивката\n"
+"    „OPTIND“.  „OPTIND“ �е инициализира да е 1 при в��ко извикване на "
+"обвивка\n"
+"    или �крипт.  Когато опци�та �е нуждае от аргумент, той �е по�тав� в\n"
+"    променливата на обвивката „OPTARG“.\n"
+"    \n"
+"    „getopts“ докладва грешки по един от два начина.  �ко първи�т знак на\n"
+"    „OPTSTRING“ е двоеточие, „getopts“ използва тихо докладване.  В този "
+"режим\n"
+"    не �е извеждат никакви �ъобщени� за грешка.  �ко �е �рещне неправилна "
+"опци�,\n"
+"    „getopts“ �лага �рещнати� знак за опци� в „OPTARG“.  �ко лип�ва "
+"задължителен\n"
+"    аргумент, „getopts“ �лага „:“ в променливата „ИМЕ“, а в „OPTARG“ — "
+"�рещнати�\n"
+"    знак за опци�.  Когато „getopts“ не е в режим на тихо докладване и �е "
+"�рещне\n"
+"    неправилна опци�, в променливата „ИМЕ“ �е �лага „?“, а „OPTARG“ �е "
+"премахва,\n"
+"    а ако лип�ва задължителен аргумент, допълнително �е изпи�ва "
+"диагно�тично\n"
+"    �ъобщение.\n"
+"    \n"
+"    �ко променливата на обвивката „OPTERR“ е �ъ� �тойно�т 0, „getopts“ "
+"изключва\n"
+"    извеждането на диагно�тични �ъобщени�, дори първи�т знак в „OPTSTRING“ "
+"да не\n"
+"    е двоеточие.  По подразбиране „OPTERR“ е �ъ� �тойно�т 1.\n"
+"    \n"
+"    „getopts“ по принцип анализира позиционните аргументи ($0 — $9), но ако "
+"�а\n"
+"    дадени повече аргументи, те биват анализирани вме�то това.\n"
+"    \n"
+"    Изходен код:\n"
+"    Връща 0 при откриването на опци�.  Връща друга �тойно�т при �тигането "
+"на\n"
+"    по�ледната опци� или при възникването на грешка."
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"Заме�тване на обвивката � дадената команда.\n"
+"    \n"
+"    Изпълн�ване на КОМ��Д�та, като т� заме�тва текущата обвивка.  "
+"�РГУМЕ�Тите\n"
+"    �е подават на КОМ��Д�та.  �ко не е дадена КОМ��Д�, прена�очвани�та �е\n"
+"    извършват в текущата обвивка.\n"
+"    \n"
+"    Опции:\n"
+"      -a  ИМЕ   ИМЕ-то �е подава като нулеви� аргумент на КОМ��Д�та\n"
+"      -c        изпълн�ване на КОМ��Д�та в празна �реда\n"
+"      -l        по�тав�не на тире в нулеви� аргумент на КОМ��Д�та\n"
+"    \n"
+"    �ко КОМ��Д�та не може да бъде изпълнена, тр�бва да �ъще�твува "
+"неинтерактивна\n"
+"    обвивка, о�вен ако не е зададена опци�та на обвивката „execfail“.\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен когато КОМ��Д�та не е открита или възникне грешка при\n"
+"    прена�очването."
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Изход от обвивката.\n"
+"    \n"
+"    Изход от обвивката � този ЦИФРОВ_КОД.  �ко той е изпу�нат, то изходни�т "
+"код\n"
+"    е този на по�ледната изпълнена команда."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Изход от входната обвивка.\n"
+"    \n"
+"    Изход от входната обвивка � този ЦИФРОВ_КОД.  Връща грешка, ако е "
+"изпълнена\n"
+"    в обвивка, ко�то не е входна."
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"Извеждане и/или изпълнение на команди от и�тори�та.\n"
+"    \n"
+"    fc �е използва за избро�ването или редактирането и повторното изпълнение "
+"на\n"
+"    команди от �пи�ъка на и�тори�та.\n"
+"    ПЪРВИ и ПОСЛЕДЕ� �а номера, които могат да указват допу�тими� диапазон.  "
+"�ко\n"
+"    е зададен �амо ПЪРВИ�т аргумент, той задава низ, който е началото на\n"
+"    команда.\n"
+"    \n"
+"    Опции:\n"
+"      -e  РЕД�КТОР\n"
+"          избор на тек�тов редактор, който да �е използва.  Стандартно е\n"
+"          указани�т в променливата „FCEDIT“, �лед това �е провер�ва „EDITOR“ "
+"и\n"
+"          в краен �лучай е „vi“.\n"
+"      -l  редовете да �е покажат вме�то редактират.\n"
+"      -n  номерата на редовете да не �е отпечатват.\n"
+"      -r  обратна подредба (отпред да е най-нови�т ред).\n"
+"    \n"
+"    При варианта „fc -s [Ш�БЛО�=З�МЕСТИТЕЛ…] [КОМ��Д�]“ командата �е "
+"изпълн�ва, като\n"
+"    в��ка по�ва на Ш�БЛона �е замен� �ъ� З�МЕСТител�.\n"
+"    \n"
+"    Удобен за използване �иноним е „r='fc -s'“.  По такъв начин, ако "
+"напишете\n"
+"    „r cc“, ще �е изпълни по�ледната команда, ко�то започва � „cc“, а "
+"когато\n"
+"    �е въведе �амо „r“, ще �е изпълни по�ледната команда.\n"
+"    \n"
+"    Изходен код:\n"
+"    Връща 0 или изхода от по�ледната команда, който не е 0 в �лучай на "
+"грешка."
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Задаване на задача да е текуща.\n"
+"    \n"
+"    Изважда З�Д�Ч� от фонов режим и � прави текуща задача.  �ко лип�ва\n"
+"    аргумент З�Д�Ч�, �е използва текущата задача �поред обвивката.\n"
+"    \n"
+"    Изходен код:\n"
+"    Изходът от командата, ко�то е зададена да е текуща или грешка, ако при\n"
+"    по�тав�нето на задачата от фонов към текущ режим възникне такава."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"По�тав�не на задачи във фонов режим.\n"
+"    \n"
+"    По�тав� в��ка З�Д�Ч� във фонов режим, в�е едно е била �тартирана � „&“.\n"
+"    �ко лип�ва аргумент З�Д�Ч�, �е използва текущата задача �поред "
+"обвивката.\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен ако управлението на задачи е изключено или възникне грешка."
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"Запомн�не или извеждане на ме�тоположени�та на програми.\n"
+"    \n"
+"    Определ�не и запомн�не на пълното име � път� на в��ко ИМЕ.  �ко не �а "
+"дадени\n"
+"    аргументи, �е извежда информаци� за в�ички запомнени команди.\n"
+"    \n"
+"    Опции:\n"
+"      -d    Забрав�не на запомненото ме�тоположение на в�ички ИМЕна\n"
+"      -l    Извеждане във формат за преизползване като вход\n"
+"      -p ПЪТ\n"
+"            Използване на по�очени� ПЪТ като пълен път за ИМЕто\n"
+"      -r    Забрав�не на в�ички запомнени ме�тоположени�\n"
+"      -t    Извеждане на запомнените ме�тоположени� на в�ички ИМЕна.  �ко е\n"
+"            по�очено повече от едно ИМЕ, в��ко ме�тоположение �е предше�тва "
+"от\n"
+"            ИМЕто\n"
+"    �ргументи:\n"
+"      ИМЕ    В��ко име �е тър�и в път� за изпълнение „PATH“ и при намирането "
+"му\n"
+"             �е добав� в �пи�ъка �ъ� запомнени команди.\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен ако ИМЕто не бъде открито или е дадена неправилна опци�."
+
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Извеждане на информаци� за вградените команди.\n"
+"    \n"
+"    Извежда кратка информаци� за вградените команди.  �ко е указан Ш�БЛО�, "
+"�е\n"
+"    извежда информаци� за напа�ващите команди.  В противен �лучай �е "
+"изважда\n"
+"    информаци� за в�ички команди.\n"
+"    \n"
+"    Опции:\n"
+"      -d    Извеждане на кратко опи�ание на в��ка тема\n"
+"      -m    Извеждане във формат наподоб�ващ �траница от ръковод�твата\n"
+"      -s    Извеждане �амо на кратко обобщение за използването на в��ка "
+"команда,\n"
+"            �ъвпадаща � Ш�БЛО�а\n"
+"    \n"
+"    �ргументи:\n"
+"      Ш�БЛО�  Шаблон за имената на командите, за които да �е изведе "
+"информаци�\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен ако нико� вградена команда не �ъвпада � шаблона или е дадена\n"
+"    неправилна опци�."
+
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Извеждане и управление на �пи�ъка на и�тори�та.\n"
+"    \n"
+"    Отпечатване на �пи�ъка на и�тори�та � номера на ред.  Редовете, които "
+"�а\n"
+"    отбел�зани �ъ� знака „*“, �а били променени.  �ргументът N указва да �е\n"
+"    извеждат �амо N на брой реда.\n"
+"    \n"
+"    Опции:\n"
+"    -c  изчи�тване на �пи�ъка, като �е изтриват в�ички елементи от него.\n"
+"    -d ПОЗИЦИЯ\n"
+"        изтрива елемента в и�тори�та намиращ �е по�очената ПОЗИЦИЯ.\n"
+"        Отрицателните позиции �е бро�т от кра� на и�тори�та\n"
+"    -a  добав� и�тори�та от текущата �е�и� към файла � и�тори�та.\n"
+"    -n  прочитане на непрочетените редове от файла � и�тори�та и добав�не "
+"към\n"
+"        текущата и�тори�.\n"
+"    -r  прочитане на файла � и�тори�та и добав�не на �ъдържанието към "
+"текущата\n"
+"        и�тори�.\n"
+"    -w  запи�ване на текущата и�тори� във файла за и�тори�та.\n"
+"    -p  извършване на и�ториче�ко заме�тване за в�еки �РГУМЕ�Т, а резултатът "
+"да\n"
+"        �е изведе, без нищо да �е запи�ва в и�тори�та на командите.\n"
+"    -s  аргументите, които не �а опции, �е добав�т като един елемент към "
+"файла �\n"
+"        и�тори�та.\n"
+"    \n"
+"    �ко аргументът ИМЕ_��_Ф�ЙЛ е зададен, той �е използва като файл за\n"
+"    и�тори�та. �ко той лип�ва, �е използва файлът �очен в променливата на\n"
+"    �редата „HISTFILE“. В противен �лучай �е ползва „~/.bash_history“.\n"
+"    \n"
+"    �ко променливата „HISTTIMEFORMAT“ е зададена и не е „null“, �тойно�тта � "
+"�е\n"
+"    използва като форматиращи� низ за функци�та „strftime“, за да �е "
+"отбел�зва\n"
+"    времето �вързано � в�еки елемент от и�тори�та.  В противен �лучай "
+"времето не\n"
+"    �е запи�ва.\n"
+"    \n"
+"    Изходен код:\n"
+"    0.  �ко възникне грешка или е подадена неправилна опци� връща грешка."
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"Извежда �ъ�то�нието на задачите.\n"
+"    \n"
+"    Извежда �пи�ък � активните задачи.  З�Д�Ч�та ограничава информаци�та до\n"
+"    �ебе �и.  Без опции �е отпечатва �ъ�то�нието на в�ички активни задачи.\n"
+"    \n"
+"    Опции:\n"
+"      -l  включва и идентификатора на проце�ите заедно �ъ� �тандартната\n"
+"          информаци�.\n"
+"      -n  извеждат �е �амо проце�ите � променено �ъ�то�ние от по�ледното\n"
+"          извеждане на тази информаци�.\n"
+"      -p  извежда �амо идентификаторите на проце�ите.\n"
+"      -r  ограничаване на изхода �амо до изпълн�ваните задачи.\n"
+"      -s  ограничаване на изхода �амо до �прените задачи.\n"
+"    \n"
+"    �ко е зададена опци�та „-x“, КОМ��Д�та �е изпълн�ва, �лед като в�ички\n"
+"    З�Д�Чи, които �е по�в�ват като �РГУМЕ�Ти, �е замен�т � идентификатора "
+"на\n"
+"    водача на групата проце�и.\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен ако не е дадена неправилна опци� или възникни грешка.  �ко �е\n"
+"    ползва „-x“, връща изходното �ъ�то�ние на КОМ��Д�та."
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"Премахване на З�Д�Чи от текущата обвивка.\n"
+"    \n"
+"    Премахва в�еки аргумент-задача от таблицата на активните задачи. �ко "
+"З�Д�Ч�\n"
+"    не е указана, �е използва тази, ко�то обвивката �чита за текуща.\n"
+"    \n"
+"    Опции:\n"
+"      -a     премахване на в�ички задачи, когато не е дадена З�Д�Ч�\n"
+"      -h     предотврат�ване на препращането на �игнал SIGHUP към задачата,\n"
+"             когато тази обвивка получи �ъщи� този �игнал\n"
+"      -r     премахване �амо на �тартираните задачи.\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен когато е дадена неправилна опци� или не�ъще�твуваща З�Д�Ч�."
+
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Изпращане на �игнал към задача.\n"
+"    \n"
+"    Изпращане на СИГ��Ла на проце�а � такъв ИДЕ�ТИФИК�ТОР_��_ПРОЦЕС (или\n"
+"    задачата � такъв ИДЕ�ТИФИК�ТОР_��_З�Д�Ч�).  �ко �игнал � такова име или\n"
+"    номер не �ъще�твува, �е използва SIGTERM.\n"
+"    \n"
+"    Опции:\n"
+"      -s СИГ��Л\n"
+"          СИГ��Л �е интерпретира като име на �игнал\n"
+"      -n СИГ��Л\n"
+"          СИГ��Л �е интерпретира като номер на �игнал\n"
+"      -l  избро�ва имената на �игналите.  �ко към командата �а добавени\n"
+"          аргументи, те �е интерпретират като номера на �игналите чиито "
+"имена\n"
+"          да �е избро�т.\n"
+"      -L  �иноним на „-l“\n"
+"    \n"
+"    „kill“ е команда вградена в обвивката поради две причини: позвол�ва да "
+"�е\n"
+"    използват и идентификатори на задачи о�вен идентификатори на проце�и, а "
+"и\n"
+"    ако �те пу�нали мак�имално разрешени� за ва� брой проце�и, н�ма да ви "
+"�е\n"
+"    налага да пу�нете още един проце�, за да убиете друг.\n"
+"    \n"
+"    Изходен код:\n"
+"    0.  �ко възникне грешка или е подадена неправилна опци�, връща грешка."
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"Изчи�л�ване на аритметичен израз.\n"
+"    \n"
+"    В�еки �РГУМЕ�Т е аритметичен израз, който �е бъде изчи�лен.  "
+"Изчи�лени�та\n"
+"    �е извършват в аритметика � целочи�лени �тойно�ти � по�то�нна широчина\n"
+"    без проверка за препълване.  Делението на 0 �е прихваща и �е отбел�зва\n"
+"    грешка.  Следващи�т �пи�ък � оператори е разделен на групи �поред\n"
+"    приоритета на операциите.  Подредбата е � намал�ващ приоритет.\n"
+"    \n"
+"    id++, id--     по�ледващо увеличаване/намал�ване на променлива\n"
+"    ++id, --id     предварително увеличаване/намал�ване на променлива\n"
+"    -, +           унарни мину�, плю�\n"
+"    !, ~           логиче�ко и побитово отрицани�\n"
+"    **             вдигане на �тепен\n"
+"    *, /, %        умножение, деление, целочи�лен о�татък\n"
+"    +, -           �ъбиране, изваждане\n"
+"    <<, >>         побитово ме�тене нал�во и над��но\n"
+"    <=, >=, <, >   �равнение\n"
+"    ==, !=         равно, различно\n"
+"    &              побитово И\n"
+"    ^              побитово изключващо ИЛИ\n"
+"    |              побитово ИЛИ\n"
+"    &&             логиче�ко И\n"
+"    ||             логиче�ко ИЛИ\n"
+"    ИЗР�З ? ИЗР�З : ИЗР�З\n"
+"                   у�ловен оператор\n"
+"     =, *=, /=, %=, +=, -=, <<=, >>=, &=, ^=, |=\n"
+"                   при�во�ване\n"
+"    \n"
+"    Разрешено е ползването на променливи на обвивката като операнди.  Името "
+"на\n"
+"    променлива �е заме�тва � нейната �тойно�т (ко�то �е преобразува до ц�ло\n"
+"    чи�ло � по�то�нна широчина) в израза.  �е е необходимо променливата да е "
+"�\n"
+"    атрибут за целочи�лено�т, за да �е използва в израз.\n"
+"    \n"
+"    Операторите �е изчи�л�ват по приоритет.  Подизразите в �коби �е "
+"изчи�л�ват\n"
+"    първи и могат да промен�т приоритета.\n"
+"    \n"
+"    Изходен код:\n"
+"    �ко по�ледни�т �РГУМЕ�Т �е изчи�л�ва като 0, „let“ връща 1. В противен\n"
+"    �лучай — връща 0."
+
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"Изчитане на ред от �тандартни� вход и раздел�нето му по полета.\n"
+"    \n"
+"    От �тандартни� вход или от файлови� де�криптор ФД, ако е използвана "
+"опци�та\n"
+"    „-u“, �е прочита един ред.  Редът �е раздел� на полета — думи.  Първата "
+"дума\n"
+"    �е при�во�ва на първото ИМЕ, втората дума на второто ИМЕ и т.н., а на\n"
+"    по�ледното ИМЕ �е при�во�ват о�таващите думи.   Като разделители на думи "
+"�е\n"
+"    използват �амо знаците указани в променливата „IFS“.\n"
+"    \n"
+"    �ко не �а дадени ИМЕна, прочетени�т ред �е запазва в променливата "
+"„REPLY“.\n"
+"    \n"
+"    Опции:\n"
+"      -a  прочетените думи �е при�во�ват по�ледователно на елементите на "
+"М�СИВа,\n"
+"          като индек�ът му започва от 0.\n"
+"      -d Р�ЗДЕЛИТЕЛ\n"
+"          четенето продължава до прочитането на първи� знак, който при�ъ�тва "
+"в\n"
+"          променливата „DELIM“, а не до минаването на нов ред.\n"
+"      -e  за четене на реда �е използва readline\n"
+"      -i ТЕКСТ\n"
+"          за първоначален тек�т в readline �е ползва ТЕКСТ\n"
+"      -n БРОЙ_З��ЦИ\n"
+"          четенето завършва �лед прочитането на този БРОЙ_З��ЦИ, не �е чака "
+"за\n"
+"          нов ред.  Разделител в рамките на този БРОЙ_З��ЦИ �е зачита.\n"
+"      -N БРОЙ_З��ЦИ\n"
+"          четенето завършва � прочитането на точно този БРОЙ_З��ЦИ, о�вен "
+"ако\n"
+"          не �е по�ви EOF или времето за изчакване на въвеждане не изтече.\n"
+"          В�ички разделители �е пренебрегват.\n"
+"      -p ПОДСК�ЗК�\n"
+"          извежда низа ПОДСК�ЗК� без минаване на нов ред, преди да започне\n"
+"          четенето на знаци от входа.\n"
+"      -r  заме�тването на екранираните � „\\“ знаци �е изключва.\n"
+"      -s  входът от терминал не �е отпечатва на екрана.\n"
+"      -t БРОЙ_СЕКУ�ДИ\n"
+"          задава интервал от този БРОЙ_СЕКУ�ДИ, в който тр�бва да �е въведе "
+"ц�л\n"
+"          ред.  В противен �лучай read завършва � грешка. �ко е зададена,\n"
+"          �тойно�тта на променливата „TMOUT“ обозначава времето, за което "
+"тр�бва\n"
+"          да �е въведе редът.  За БРОЙ_СЕКУ�ДИ може да �е ползва и нец�ло "
+"чи�ло.\n"
+"          �ко БРОЙ_СЕКУ�ДИ e 0, read незабавно завършва работа, без да �е "
+"опитва\n"
+"          да чете данни и връща код 0, �амо ако от указани� файлов "
+"де�криптор\n"
+"          могат да �е прочетат данни.\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен ако не �е �рещне знак за край на файл EOF, изтече време повече "
+"от\n"
+"    указаното в БРОЙ_СЕКУ�ДИ, при което кодът за изход е над 128, възникне\n"
+"    грешка при задаване на �тойно�т на променлива или е зададен неправилен\n"
+"    файлов де�криптор като аргумент на -u."
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"Връщане от функци� на обвивката.\n"
+"    \n"
+"    Кара изпълн�ваната функци� или �крипт да завършат работа �ъ� зададени�\n"
+"    изходен ЦИФРОВ_КОД.  �ко не е зададен ЦИФРОВ_КОД �е използва изходни� "
+"код на\n"
+"    по�ледно изпълнената команда във функци�та или �крипта.\n"
+"    \n"
+"    Изходен код:\n"
+"    Връща ЦИФРОВи�_КОД или грешка, ако обвивката в момента не изпълн�ва "
+"функци�\n"
+"    или �крипт."
+
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"Задаване или изтриване на позиционни параметри и опции на обвивката.\n"
+"    \n"
+"    Пром�на на �тойно�тите на позиционните параметри и опции на обвивката,\n"
+"    Извеждане на имената и �тойно�тите на променливите на обвивката.\n"
+"    \n"
+"    Опции:\n"
+"      -a  Отбел�зване на променливите, които �а �ъздадени или променени, да\n"
+"          бъдат изне�ени.\n"
+"      -b  �езабавно изве�т�ване на �пиране на задача.\n"
+"      -e  �езабавен изход, ако команда приключи команда � код, който не е "
+"0.\n"
+"      -f  Изключване на генерирането на имена на файлове (чрез „*“, „?“ и т."
+"н.).\n"
+"      -h  Запомн�не на ме�тоположението на команди при тър�енето им.\n"
+"      -k  В�ички аргументи за при�во�ване �е поме�тват в �редата на команда, "
+"не\n"
+"          �амо тези, които предхождат името на команда.\n"
+"      -m  Включване на управлението на задачи.\n"
+"      -n  Прочитане на команди, без да �е изпълн�ват.\n"
+"      -o  ИМЕ_��_ОПЦИЯ\n"
+"          Задаване на променливата, ко�то отговар� на ИМЕто_��_ОПЦИЯ:\n"
+"            allexport    �ъщото като „-a“\n"
+"            braceexpand  �ъщото като „-B“\n"
+"            emacs        интерфей� за редактиране подобен на „emacs“\n"
+"            errexit      �ъщото като „-e“\n"
+"            errtrace     �ъщото като „-E“\n"
+"            functrace    �ъщото като „-T“\n"
+"            hashall      �ъщото като „-h“\n"
+"            histexpand   �ъщото като „-H“\n"
+"            history      включване на и�тори�та на командите\n"
+"            ignoreeof    обвивката н�ма да излезе при откриване на знак за "
+"край\n"
+"                         на файл „EOF“.\n"
+"            interactive-comments\n"
+"                         позвол�ване на коментари в интерактивните команди\n"
+"            keyword      �ъщото като „-k“\n"
+"            monitor      �ъщото като „-m“\n"
+"            noclobber    �ъщото като „-C“\n"
+"            noexec       �ъщото като „-n“\n"
+"            noglob       �ъщото като „-f“\n"
+"            nolog        тази опци� �е приема в момента, но �е игнорира\n"
+"            notify       �ъщото като „-b“\n"
+"            nounset      �ъщото като „-u“\n"
+"            onecmd       �ъщото като „-t“\n"
+"            physical     �ъщото като „-P“\n"
+"            pipefail     изходни�т код на програмни� канал е този на "
+"по�ледната\n"
+"                         команда, ко�то завършва � код различен от 0\n"
+"            posix        пром�на на поведението на „bash“ да отговар� по-"
+"добре\n"
+"                         на �тандарта POSIX\n"
+"            privileged   �ъщото като „-p“\n"
+"            verbose      �ъщото като „-v“\n"
+"            vi           използване на интерфей� за редактиране подобен на "
+"„vi“\n"
+"            xtrace       �ъщото като „-x“\n"
+"      -p  Опци�та e включена, когато реални�т и ефективни�т идентификатори "
+"на\n"
+"          проце�и не �ъвпадат.  Изключва обработката на файла по�очен в\n"
+"          променливата „ENV“ и вна��нето на функции на обвивката.  "
+"Изключването\n"
+"          на тази опци� води до това ефективните идентификатори за "
+"потребител и\n"
+"          група да �танат равни на реалните.\n"
+"      -t  Изход �лед прочитането и изпълнението на една команда.\n"
+"      -u  �езададените променливи да �е третират като грешки при "
+"заме�тването.\n"
+"      -v  Отпечатване на входните редове към обвивката при прочитането им.\n"
+"      -x  Отпечатване на командите и аргументите им при изпълнението им.\n"
+"      -B  Обвивката ще извършва заме�тване на изразите � фигурни �коби.\n"
+"      -C  Предотврат�ване на презапи�ването на �ъще�твуващите обикновени "
+"файлове\n"
+"          чрез прена�очване на изхода.\n"
+"      -E  Прихващането за „ERR“ да �е на�лед�ва от функциите на обвивката.\n"
+"      -H  Включване на заме�тването чрез и�тори�та � „!“.  Стандартно тази "
+"опци�\n"
+"          е налична �амо за интерактивните обвивки.\n"
+"      -P  Да не �е �ледват �имволните връзки при изпълнението на команди "
+"като\n"
+"          „cd“, които промен�т текущата директори�.\n"
+"      -T  Прихващането за „DEBUG“ и „RETURN“ да �е на�лед�ва от функциите "
+"на\n"
+"          обвивката.\n"
+"      --  О�таващите аргументи да �е тълкуват като позиционни.  �ко н�ма "
+"повече\n"
+"          аргументи, �е изтриват �ъответните позиционни.\n"
+"      -   О�таващите аргументи да �е тълкуват като позиционни.  Опциите „-x“ "
+"и\n"
+"          „-v“ �а изключени.\n"
+"    \n"
+"    Използването на „+“ вме�то „-“ изключва опциите.  Тези опции могат да "
+"�е\n"
+"    използват и при �тартирането на обвивката.  Текущото им �ъ�то�ние �е "
+"намира\n"
+"    в променливата „-“ (получава �е � „$-“).  О�таналите �РГументи �а "
+"позиционни\n"
+"    и �е при�во�ват �ъответно на променливите � имена „1“, „2“,… "
+"„n“  (получават\n"
+"    �е � „$1“, „$2“,… „${n}“).  �ко не �а зададени �РГументи, �е извеждат\n"
+"    в�ички променливи на �редата.\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен ако не е зададена неправилна опци�."
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"Изтриване на �тойно�тите и атрибутите на променливите и функциите на "
+"обвивката.\n"
+"    \n"
+"    За в��ко ИМЕ изтрива �ъответната променлива или функци�.\n"
+"    \n"
+"    Опции:\n"
+"      -f    в��ко ИМЕ �е тълкува като функци� на обвивката\n"
+"      -v    в��ко ИМЕ �е тълкува като променлива на обвивката\n"
+"      -n    в��ко ИМЕ �е тълкува като променлива-указател — трие �е �амата\n"
+"            променлива, а не тази, към ко�то т� �очи\n"
+"    \n"
+"    �ко не �а подадени опции, командата unset първо �е опитва да изтрие\n"
+"    променлива и �лед това функци� � това ИМЕ.\n"
+"    \n"
+"    ��кои променливи не могат да бъдат изтрити.  Вижте вградената команда\n"
+"    „readonly“ (�амо за четене).\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен ако е зададена неправилна опци� или н�кое от ИМЕната е �амо за\n"
+"    четене."
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Задаване на атрибута за изна��не на променливите на обвивката.\n"
+"    \n"
+"    Обозначава в��ко едно от ИМЕната за изна��не в �редата на изпълнение на\n"
+"    по�ледващо изпълнените команди.  �ко е дадена СТОЙ�ОСТ, т� �е при�во�ва "
+"на\n"
+"    ИМЕто преди изна��нето.\n"
+"    \n"
+"    Опции:\n"
+"      -f    ИМЕто е на функци� на обвивката\n"
+"      -n    Премахване на атрибута за изна��не от в��ко от ИМЕната\n"
+"      -p    Извеждане на �пи�ък � имената на в�ички променливи и функции за\n"
+"            изна��не\n"
+"    \n"
+"    �ргументът „--“ прекъ�ва по нататъшната обработка на опции.\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен ако е зададена неправилна опци� или н�кое от ИМЕната е "
+"неправилно."
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Задаване на променливи на обвивката като непроменливи кон�танти.\n"
+"    \n"
+"    Отбел�зване на в��ко от ИМЕната �амо за четене.  Т�хната �тойно�т не "
+"може да\n"
+"    бъде промен�на чрез по�ледващо при�во�ване.  �ко е дадена СТОЙ�ОСТ, т� "
+"�е\n"
+"    задава на името преди задаването му като кон�тантно.\n"
+"    \n"
+"    Опции:\n"
+"      -a    ИМЕната �а на променливи-ма�иви\n"
+"      -A    ИМЕната �а на променливи-а�оциативни ма�иви\n"
+"      -f    ИМЕната �а на функции на обвивката\n"
+"      -p    Извеждане на имената на в�ички кон�тантни променливи или "
+"функции, в\n"
+"            зави�имо�т дали е зададена опци�та „-f“\n"
+"    \n"
+"    �ргументът „--“ прекъ�ва по нататъшната обработка на опции.\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен ако е зададена неправилна опци� или н�кое от ИМЕната е "
+"неправилно."
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"Изме�тване на позиционните параметри.\n"
+"    \n"
+"    Преименуване на позиционните параметри „БРОЙ+1“, „БРОЙ+2“… на 1, 2….  "
+"Така\n"
+"    те �тават до�тъпни не като ${БРОЙ+1}…, като „$1“….  �ко не е зададена\n"
+"    �тойно�т БРОЙ, �е използва 1.\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен ако БРО�т е отрицателно или по-гол�мо от �тойно�тта „$#“."
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Изпълн�ване на команди от файл в текущата обвивка\n"
+"    \n"
+"    Изчитане и изпълнение на командите от Ф�ЙЛа и изход.  Директориите "
+"опи�ани в\n"
+"    променливата „PATH“ �е използват за изпълнението на командите от Ф�ЙЛа.  "
+"�ко\n"
+"    �а зададени �РГУМЕ�ТИ, те �е превръщат в позиционни аргументи при\n"
+"    изпълнението на Ф�ЙЛа.\n"
+"    \n"
+"    Изходен код:\n"
+"    Връща �ъ�то�нието на по�ледно изпълнената команда във Ф�ЙЛа.  �ко той "
+"не\n"
+"    може да бъде открит, изходът е грешка."
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Временно �пиране на изпълнението на обвивката.\n"
+"    \n"
+"    Спиране на работата на тази обвивка докато обвивката не получи �игнал\n"
+"    SIGCONT.  О�вен ако изрично не �е зададе опци�, входните обвивки не "
+"могат да\n"
+"    бъдат �прени по този начин.\n"
+"    \n"
+"    Опции:\n"
+"      -f    Задължително �пиране, дори и ако обвивката е вход�ща\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен ако не възникне грешка или управлението на задачи е изключено."
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"Изчи�л�ване на у�ловен израз.\n"
+"    \n"
+"    Изход � код 0 (и�тина) или 1 (лъжа) в зави�имо�т от �тойно�тта на "
+"ИЗР�За.\n"
+"    Изразите могат да бъдат унарни или бинарни.  Унарните най-че�то �е "
+"използват\n"
+"    за проверка на �ъ�то�нието на файл.  О�вен т�х има и оператори за "
+"чи�лови\n"
+"    �равнени� и низови оператори.\n"
+"    \n"
+"    Поведението на те�товете зави�и от бро� на аргументите.  За ц�ло�тно\n"
+"    опи�ание прочетете �траниците от ръковод�твото на bash.\n"
+"    \n"
+"    Файлови оператори:\n"
+"    \n"
+"      -a Ф�ЙЛ    И�тина, ако Ф�ЙЛът �ъще�твува.\n"
+"      -b Ф�ЙЛ    И�тина, ако Ф�ЙЛът е блоково у�трой�тво.\n"
+"      -c Ф�ЙЛ    И�тина, ако Ф�ЙЛът е знаково у�трой�тво.\n"
+"      -d Ф�ЙЛ    И�тина, ако Ф�ЙЛът е директори�.\n"
+"      -e Ф�ЙЛ    И�тина, ако Ф�ЙЛът �ъще�твува.\n"
+"      -f Ф�ЙЛ    И�тина, ако Ф�ЙЛът �ъще�твува и е обикновен файл.\n"
+"      -g Ф�ЙЛ    И�тина, ако Ф�ЙЛът е �ъ� зададен бит за �м�на на група\n"
+"                 при изпълнение.\n"
+"      -h Ф�ЙЛ    И�тина, ако Ф�ЙЛът е �имволна връзка.\n"
+"      -L Ф�ЙЛ    И�тина, ако Ф�ЙЛът е �имволна връзка.\n"
+"      -k Ф�ЙЛ    И�тина, ако Ф�ЙЛът е �ъ� зададен лепкав бит.\n"
+"      -p Ф�ЙЛ    И�тина, ако Ф�ЙЛът е именуван програмен канал.\n"
+"      -r Ф�ЙЛ    И�тина, ако Ф�ЙЛът може да бъде прочетен от ва�.\n"
+"      -s Ф�ЙЛ    И�тина, ако Ф�ЙЛът може да бъде запи�ван от ва�.\n"
+"      -S Ф�ЙЛ    И�тина, ако Ф�ЙЛът е програмно гнездо.\n"
+"      -t ФДСК    И�тина, ако Файлови�т_ДеСКриптор е отворен на терминал.\n"
+"      -u Ф�ЙЛ    И�тина, ако Ф�ЙЛът е �ъ� зададен бит за �м�на на "
+"потребител\n"
+"                 при изпълнение.\n"
+"      -w Ф�ЙЛ    И�тина, ако Ф�ЙЛът може да бъде запи�ван от ва�.\n"
+"      -x Ф�ЙЛ    И�тина, ако Ф�ЙЛът може да бъде изпълн�ван от ва�.\n"
+"      -O Ф�ЙЛ    И�тина, ако Ф�ЙЛът може да бъде ефективно притежаван от "
+"ва�.\n"
+"      -G Ф�ЙЛ    И�тина, ако Ф�ЙЛът може да бъде ефективно притежаван от "
+"вашата\n"
+"                 група.\n"
+"      -N Ф�ЙЛ    И�тина, ако Ф�ЙЛът е бил промен�н от по�ледното му "
+"прочитане.\n"
+"    \n"
+"      Ф�ЙЛ_1 -nt Ф�ЙЛ_2    И�тина, ако Ф�ЙЛ_1 е по-нов от Ф�ЙЛ_2 (�поред\n"
+"                           датата на пром�на).\n"
+"      Ф�ЙЛ_1 -ot Ф�ЙЛ_2    И�тина, ако Ф�ЙЛ_1 е по-�тар от Ф�ЙЛ_2 (�поред\n"
+"                           датата на пром�на).    \n"
+"      Ф�ЙЛ_1 -ef Ф�ЙЛ_2    И�тина, ако Ф�ЙЛ_1 е твърда връзка към Ф�ЙЛ_2.\n"
+"    \n"
+"    �изови оператори:\n"
+"    \n"
+"      -z �ИЗ     И�тина, ако �ИЗът е празен.\n"
+"      -n �ИЗ     И�тина, ако �ИЗът не е празен.\n"
+"      �ИЗ        И�тина, ако �ИЗът не е празен.\n"
+"    \n"
+"      �ИЗ_1  = �ИЗ_2    И�тина, ако низовете �а равни.\n"
+"      �ИЗ_1 != �ИЗ_2    И�тина, ако низовете не �а равни.\n"
+"      �ИЗ_1  < �ИЗ_2    И�тина, ако �ИЗ_1 е лек�икограф�ки преди �ИЗ_2.\n"
+"      �ИЗ_1  > �ИЗ_2    И�тина, ако �ИЗ_1 е лек�икограф�ки �лед �ИЗ_2.\n"
+"    \n"
+"    Други оператори:\n"
+"    \n"
+"      -o ОПЦИЯ              И�тина, ако ОПЦИЯта на обвивката е зададена.\n"
+"      -v ПРОМЕ�ЛИВ�         И�тина, ако ПРОМЕ�ЛИВ�та на обвивката е "
+"зададена.\n"
+"      -R ПРОМЕ�ЛИВ�         И�тина, ако ПРОМЕ�ЛИВ�та е зададена като "
+"променлива-\n"
+"                            указател.\n"
+"      ! ИЗР�З               И�тина, ако ИЗР�Зът е лъжа.\n"
+"      ИЗР�З_1 -a ИЗР�З_2    И�тина, ако и двата ИЗР�За �а и�тина.\n"
+"      ИЗР�З_1 -o ИЗР�З_2    И�тина, ако поне един от ИЗР�Зите е и�тина.\n"
+"      �РГ_1 ОПЕР �РГ_2      �ритметични те�тове.  Те връщат и�тина, ако �е\n"
+"                            изпълн�ва математиче�кото у�ловие на ОПЕРатора,\n"
+"                            който е един от �ледните (значението е в "
+"�коби):\n"
+"                            „-eq“ (=),  „-ne“ (!=), „-lt“ (<), „-le“ (<=),\n"
+"                            „-gt“ (>) , „-ge“ (>=).\n"
+"    \n"
+"    �ритметичните изрази завършват и�тинно, ако �РГумент_1 е �ъответно "
+"равен,\n"
+"    неравен, по-малък, по-малък или равен, по-гол�м, по-гол�м или равен на\n"
+"    �РГумент_2.\n"
+"    \n"
+"    Изходен код:\n"
+"    0, ако ИЗР�Зът е верен.  Грешка, когато ИЗР�Зът е неверен или е даден\n"
+"    неправилен аргумент."
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Изчи�л�ване на у�ловен израз.\n"
+"    \n"
+"    Това е �иноним на вградената команда „test“, но по�ледни�т аргумент "
+"тр�бва\n"
+"    задължително да е знакът „]“, който да �ъответ�тва на отвар�щата "
+"квадратна\n"
+"    �коба „[“."
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Извеждане на времето на работа на проце�ите.\n"
+"    \n"
+"    Отпечатва общото потребител�ко и �и�темно време на работа на обвивката "
+"и\n"
+"    в�ичките � дъщерни проце�и.\n"
+"    \n"
+"    Изходен код:\n"
+"    Винаги 0."
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"Прихващане на �игналите и другите �ъбити�.\n"
+"    \n"
+"    Дефинира и задей�тва функции за обработка, когато обвивката получи "
+"�игнал\n"
+"    или възникне друго �ъбитие.\n"
+"    \n"
+"    Командата �РГУМЕ�Т ще бъде прочетена и изпълнена, когато обвивката "
+"получи\n"
+"    УК�З��и�_СИГ��Л(и).  �ко �РГУМЕ�Тът лип�ва (и �е подава единичен\n"
+"    УК�З��_СИГ��Л) или е „-“, то в�еки УК�З��_СИГ��Л �е връща към "
+"първоначалната\n"
+"    �и �тойно�т.  �ко �РГУМЕ�Тът е нулеви�т низ, в�еки УК�З��_СИГ��Л �е\n"
+"    пренебрегва от обвивката и командите, които �е �тартират през не�.\n"
+"    \n"
+"    �ко УК�З��и�т_СИГ��Л е „EXIT (0)“, то командата �РГУМЕ�Т �е изпълн�ва "
+"от\n"
+"    обвивката при изход.  �ко УК�З��и�т_СИГ��Л е „DEBUG“, �РГУМЕ�Тът �е\n"
+"    изпълн�ва �лед в��ка про�та команда.  �ко УК�З��и�т_СИГ��Л е „RETURN“,\n"
+"    �РГУМЕ�Тът �е изпълн�ва �лед в��ко изпълнение на функци� както и "
+"изпълнение\n"
+"    на �крипт чрез вградените команди „.“ и „source“.  �ко УК�З��и�т_СИГ��Л "
+"е\n"
+"    „ERR“, �РГУМЕ�Тът �е изпълн�ва �лед в��ка грешка, ко�то би предизвикала\n"
+"    изход от обвивката при �тартирането � � опци�та „-e“.\n"
+"    \n"
+"    �ко не �а дадени аргументи, �е отпечатват командите при�воени на в�ички\n"
+"    прихващани�.\n"
+"    \n"
+"    Опции:\n"
+"      -l  отпечатва �пи�ъка � имената на �игналите и �ъответ�тващите им "
+"номера.\n"
+"      -p  извеждат �е командите �вързани � в�еки УК�З��_СИГ��Л.\n"
+"    \n"
+"    В�еки УК�З��_СИГ��Л е или име на �игнал от файла „signal.h“ или номер "
+"на\n"
+"    �игнал.\n"
+"    ��ма разлика между главни и малки букви в имената на �игнали, а "
+"пред�тавката\n"
+"    „SIG“ не е задължителна.\n"
+"    Сигнал може да бъде изпратен на обвивката � командата „kill -signal $"
+"$“.\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен ако е зададен неправилен �игнал или опци�."
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"Извеждане на информаци� за вида на командата подадена като аргумент.\n"
+"    \n"
+"    За в��ко ИМЕ �е извежда как ще �е интерпретира, когато �е използва като\n"
+"    команда.\n"
+"    \n"
+"    Опции:\n"
+"      -a    Извеждане на в�ички ме�тоположени�, които �ъдържат изпълним файл "
+"�\n"
+"            това ИМЕ.  Включва �инонимите, вградените команди и функции на\n"
+"            обвивката, �амо когато не е използвана опци�та „-p“\n"
+"      -f    Без тър�ене във функциите дефинирани в обвивката\n"
+"      -P    Тър�ене в път� за изпълнение указан в PATH, дори и ако "
+"�ъще�твува\n"
+"            �иноним, вградена команда или функци� дефинирана в обвивката � "
+"това\n"
+"            ИМЕ\n"
+"      -p    Връща или името на файла, който ще бъде изпълнен или нищо в\n"
+"            �лучаите, когато командата „type -t ИМЕ“ не би върнала „file“\n"
+"      -t    Извеждане на една от думите „alias“ (�иноним), „keyword“\n"
+"            (резервирана лек�ема в обвивката), „function“ (функци� "
+"дефинирана в\n"
+"            обвивката), „builtin“ (вградена команда), „file“ (изпълним файл) "
+"или\n"
+"            „“, ако ИМЕто не е открито\n"
+"    \n"
+"    �ргументи:\n"
+"      ИМЕ    Името, за което да �е изведе информаци�.\n"
+"    \n"
+"    Изходен код:\n"
+"    0, ако в�ички подадени ИМЕна �а открити, неу�пех, ако н�кое от т�х "
+"лип�ва."
+
+#: builtins.c:1431
+#, fuzzy
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Пром�на на ре�ур�ите на обвивката.\n"
+"    \n"
+"    Командата о�ъще�тв�ва контрол върху ре�ур�ите, които �а до�тъпни на\n"
+"    проце�ите �тартирани през обвивката върху �и�темите, които поддържат "
+"такова\n"
+"    управление.\n"
+"    \n"
+"    Опции:\n"
+"      -S    използване на „мекото“ ограничение на ре�ур�\n"
+"      -H    използване на „твърдото“ ограничение на ре�ур�\n"
+"      -a    извеждат �е в�ички текущи ограничени�\n"
+"      -b    размер на буфера за програмните гнезда\n"
+"      -c    мак�имални�т размер на �ъздадените файлове �ъ� �ъдържание на\n"
+"            паметта (core)\n"
+"      -d    мак�имални�т размер на �егмента на проце� за данни\n"
+"      -e    мак�имални�т приоритет (nice)\n"
+"      -f    мак�имални�т размер на файловете �ъздадени от обвивката и "
+"дъщерните\n"
+"            � проце�и\n"
+"      -i    мак�имални�т брой на изчакващите �игнали\n"
+"      -l    мак�имални�т размер памет, ко�то проце� може да заключи\n"
+"      -m    мак�имални�т по�то�нно зареден в паметта �егмент\n"
+"      -n    мак�имални�т брой де�криптори на отворени файлове\n"
+"      -p    размер на буфера за програмни канали\n"
+"      -q    мак�имални�т брой байтове в опашките за �ъобщени� по POSIX\n"
+"      -r    мак�имални�т приоритет за реално време\n"
+"      -s    мак�имални�т размер на �тека\n"
+"      -t    мак�ималното проце�орно време в �екунди\n"
+"      -u    мак�имални�т брой потребител�ки проце�и\n"
+"      -v    размерът на виртуалната памет\n"
+"      -x    мак�имални�т брой заключвани� на файлове\n"
+"      -P    мак�имални�т брой п�евдотерминали\n"
+"      -T    мак�имални�т брой нишки\n"
+"    \n"
+"    �е в�ички ограничени� �а налични на в�ички платформи.\n"
+"    \n"
+"    �ко е зададено ОГР��ИЧЕ�ИЕ, то това е новата �тойно�т на указани� "
+"ре�ур�.\n"
+"    Специалните �тойно�ти „soft“, „hard“ и „unlimited“ означават текущите "
+"меко,\n"
+"    твърдо и никакво ограничение �ъответно.  В противен �лучай �е извежда\n"
+"    текущата �тойно�т на указани� ре�ур�.  �ко не е зададена опци�, �е "
+"приема,\n"
+"    че е зададена „-f“.\n"
+"    \n"
+"    Стойно�тите �а в блокове от по 1024 байта, � изключение на:\n"
+"      � опци�та „-t“, при ко�то �тойно�тта е в �екунди;\n"
+"      � опци�та „-p“, при ко�то блоковете �а от по 512 байта;\n"
+"      � опци�та „-u“, при ко�то �тойно�тта е точни�т брой проце�и.<\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен ако не възникни грешка или е дадена неправилна опци�."
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"Извеждане или пром�на на ма�ката за до�тъпа до ново�ъздадени файлове.\n"
+"    \n"
+"    Задава М�СК�та за правата за до�тъп до ново�ъздадени файлове.  �ко не е\n"
+"    зададена М�СК�, �е извежда текущата � �тойно�т.\n"
+"    \n"
+"    �ко М�СК�та започва � цифра, т� �е тълкува като о�мично чи�ло.  В "
+"противен\n"
+"    �лучай тр�бва да е низ, който би бил приет от командата chmod(1).\n"
+"    \n"
+"    Опции:\n"
+"      -p    ако не е зададена М�СК�, изведени�т низ може да бъде ползван за "
+"вход\n"
+"      -S    изведената ма�ка да е във вид на �ИЗ.  Без опци�та изходът е "
+"о�мично\n"
+"            чи�ло\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен ако М�СК�та или н�ко� от зададените опции �а неправилни."
+
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"Изчакване на завършването задача и връщане на изходни� код.\n"
+"    \n"
+"    Изчакване на в�ички указани ИДентификатори, които могат да �а номера на\n"
+"    проце�и или указатели на задачи, и докладване на изходни� код.  �ко не "
+"е\n"
+"    зададен ИДентификатор, �е изчакват в�ички активни дъщерни проце�и, а\n"
+"    изходни�т код е 0.  �ко ИДентификаторът е указател на задача, �е "
+"изчакват\n"
+"    в�ички проце�и в конвейера на задачата.\n"
+"    \n"
+"    �ко е зададена опци�та „-n“, �е изчаква кра� на работата на �ледващата\n"
+"    задача и �е връща нейни� код.\n"
+"    \n"
+"    �ко е зададена опци�та „-n“ и управлението на задачите е включено, �е\n"
+"    изчаква завършването на проце�а/задачата � указаните ИДентификатори "
+"вме�то\n"
+"    �м�ната на �ъ�то�нието им.\n"
+"    \n"
+"    Изходен код:\n"
+"    Връща изходни� код на по�ледната задача или проце�.  �ко е зададена\n"
+"    неправилна опци�, връща грешка."
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"Изчакване на указани� проце� и докладване за изходни� код.\n"
+"    \n"
+"    Изчакване на в�ички указани проце�и и докладване за изходни� код.  �ко "
+"не е\n"
+"    зададен ИДентификатор_ПРоцe�, в�ички текущо активни дъщерни проце�и �е\n"
+"    изчакват и изходни�т код е 0.  ИДентификатор_ПРоцe� тр�бва да "
+"�ъответ�тва на\n"
+"    н�кой проце�.\n"
+"    \n"
+"    Изходен код:\n"
+"    Изходни� код на проце�а � по�ледни� идентификатор.  Грешка, ако е даден\n"
+"    неправилен идентификатор или е дадена неправилна опци�."
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Изпълнение на команда за в�еки член в �пи�ък от елементи\n"
+"    \n"
+"    Цикълът „for“ изпълн�ва по�ледователно�т от команди за в�еки член в "
+"�пи�ък\n"
+"    от елементи.  �ко блокът „в ДУМИ…“ не при�ъ�тва, използва �е „in \"$@"
+"\"“.\n"
+"    За в�еки елемент в ДУМИте, ИМЕто �е задава да е елементът и �е "
+"изпълн�ват\n"
+"    КОМ��ДИте.\n"
+"    \n"
+"    Изходен код:\n"
+"    Връща изходни� код на по�ледно изпълнената команда."
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"�ритметичен цикъл чрез „for“\n"
+"    Еквивалентно на:\n"
+"      (( ИЗР�З_1 ))\n"
+"      while (( ИЗР�З_2 )); do\n"
+"        КОМ��ДИ\n"
+"        (( EXP_3 ))\n"
+"      done\n"
+"    ИЗР�З_1, ИЗР�З_2, и ИЗР�З_3 �а аритметични изрази.  В�еки изпу�нат израз "
+"�е\n"
+"    изчи�л�ва да е 1.\n"
+"    \n"
+"    Изходен код:\n"
+"    Връща изходни� код на по�ледно изпълнената команда."
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Избор на думи от �пи�ък и изпълнение на команди.\n"
+"    \n"
+"    ДУМИте биват заме�твани, което води до �ъздаването на �пи�ък � думи.\n"
+"    �аборът от заме�тените думи бива отпечатан на изхода за �тандартната\n"
+"    грешка, като в��ка от т�х �е предше�тва от номер.  �ко клаузата „in "
+"ДУМИ“\n"
+"    лип�ва, използва �е „in \"$@\"“.  В такива �лучаи �е отпечатва "
+"под�казката\n"
+"    „PS3“ и от �тандартни� вход �е прочита ред.  �ко редът �е �ъ�тои от "
+"номера,\n"
+"    който �ъответ�тва на н�ко� от изведените думи, ИМЕто �е задава да е "
+"тази\n"
+"    дума.  �ко редът е празен, отново �е отпечатват ДУМИте и под�казката.  "
+"�ко\n"
+"    �е прочете „EOF“, командата завършва.  В��ка друга �тойно�т при�во�ва "
+"„null“\n"
+"    на ИМЕ.  Прочетени�т ред �е запазва в променливата REPLY.  КОМ��ДИте �е\n"
+"    изпълн�ват �лед в�еки избор до изпълн�ването на команда за прекъ�ване\n"
+"    (break).\n"
+"    \n"
+"    Изходен код:\n"
+"    Връща изходни� код на по�ледно изпълнената команда."
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"Отпечатване на времето за изпълнение на програмен канал.\n"
+"    \n"
+"    Изпълнение на ПРОГР�М�и�_К���Л и отпечатване на обобщение за реалното,\n"
+"    потребител�кото и �и�темно проце�орни времена, които изпълнението на\n"
+"    ПРОГР�М�и�_К���Л отнема.\n"
+"    \n"
+"    Опции:\n"
+"      -p:  извеждане на �тати�тиката за времето във формат POSIX\n"
+"    \n"
+"    Стойно�тта на променливата на �редата „TIMEFORMAT“ определ� изходни�\n"
+"    формат.\n"
+"    \n"
+"    Изходен код:\n"
+"    Изходни�т код е този на ПРОГР�М�и�_К���Л."
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Изпълнение на команди на базата на напа�ване по шаблон.\n"
+"    \n"
+"    Избирателно �е изпълн�ват КОМ��ДИ на база ДУМ�, ко�то напа�ва на "
+"Ш�БЛО�.\n"
+"    Шаблоните �е раздел�т �ъ� знака „|“.\n"
+"    \n"
+"    Изходен код:\n"
+"    Изходни�т код е този на по�ледно изпълнената команда."
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Изпълнение на команда на базата на у�ловие.\n"
+"    \n"
+"    Първо �е изпълн�ват командите в блока „if КОМ��ДИ“.  �ко изходни�т код е "
+"0,\n"
+"    то �е изпълн�ва блокът „then КОМ��ДИ“.  В противен �лучай по�ледователно "
+"�е\n"
+"    изпълн�ва в�еки блок „elif КОМ��ДИ“ — ако изходни�т код е 0, то �е "
+"изпълн�ва\n"
+"    �ъответни� блок „then КОМ��ДИ“, �лед което завършва изпълнението на "
+"цели�\n"
+"    блок „if“.\n"
+"    �ко изходни�т код на никой от блоковете „if“ и „elif“ не е бил 0,\n"
+"    изпълн�ва �е блока „else КОМ��ДИ“, �тига такъв да при�ъ�тва.  Изходни�т "
+"код\n"
+"    от ц�лата кон�трукци� е този на по�ледната изпълнена команда или е 0, "
+"ако\n"
+"    никое те�тово у�ловие, не �е е оценило като и�тина.<\n"
+"    \n"
+"    Изходен код:\n"
+"    Изходни�т код е този на по�ледно изпълнената команда."
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Изпълнение на команда докато определен те�т е у�пешен.\n"
+"    \n"
+"    Заме�тване и изпълнение на КОМ��ДИте докато по�ледната команда в блока\n"
+"    „while“ е � изходен код, който е 0.\n"
+"    \n"
+"    Изходен код:\n"
+"    Изходни�т код е този на по�ледно изпълнената команда."
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Изпълнение на команда докато определен те�т е неу�пешен.\n"
+"    \n"
+"    Заме�тване и изпълнение на КОМ��ДИте докато по�ледната команда в блока\n"
+"    „until“ е � изходен код, който не е 0.\n"
+"    \n"
+"    Изходен код:\n"
+"    Изходни�т код е този на по�ледно изпълнената команда."
+
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"Създаване на копроце� � даденото ИМЕ.\n"
+"    \n"
+"    ��инхронно изпълнение на КОМ��Д�та, като �тандартните вход и изход �е\n"
+"    прена�очват от и към файловите де�криптори, които тр�бва да �а � "
+"индек�и\n"
+"    �ъответно 0 и 1 в променливата-ма�ив ИМЕ в изпълн�ваната обвивка.  �ко "
+"не е\n"
+"    дадено ИМЕ на променлива, �тандартно �е ползва „COPROC“.\n"
+"    \n"
+"    Изходен код:\n"
+"    Изходни�т код е 0."
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"Дефиниране на функци� на обвивката.\n"
+"    \n"
+"    Създаване на функци� на обвивката �ъ� зададеното ИМЕ.  Когато �е извика "
+"като\n"
+"    обикновена команда, КОМ��ДИте �е изпълн�ват в контек�та на  извикващата\n"
+"    обвивка.  При извикването на ИМЕто, аргументите подадени на функци�та "
+"�а\n"
+"    до�тъпни като $1,… , $9, а името на функци�та е до�тъпно като "
+"$FUNCNAME.\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен ако ИМЕто не е �амо за четене."
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Изпълнение на група от команди.\n"
+"    \n"
+"    Изпълн�ване на ц�л набор от команди в група.  Това е един от начините да "
+"�е\n"
+"    прена�очи ц�л набор от команди.\n"
+"    \n"
+"    Изходен код:\n"
+"    Изходни�т код е този на по�ледно изпълнената команда."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"Възобнов�ване на заден фон на изпълнението на задача\n"
+"    \n"
+"    Еквивалентно на аргумента З�Д�Ч� на командата „fg“.  Възобнов�ва �пр�на\n"
+"    задача или такава на заден фон.  З�Д�Ч�та може да указва или име, или\n"
+"    номер на задача.  �ко �лед З�Д�Ч�та �е въведе знакът „&“, задачата\n"
+"    �е изпълн�ва във фонов режим, в�е едно е била подадена като аргумент\n"
+"    на командата „bg“.\n"
+"    \n"
+"    Изходен код:\n"
+"    Изходни�т код е този възобновената задача."
+
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Изчи�л�ване на аритметичен израз\n"
+"    \n"
+"    ИЗР�Зът �е изчи�л�ва �поред правилата на аритметичното оцен�ване.\n"
+"    Еквивалентно на „let ИЗР�З“.\n"
+"    \n"
+"    Изходен код:\n"
+"    1, ако резултатът на ИЗР�За е 0.  В противен �лучай — 0."
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"Изпълнение на команда-у�ловие\n"
+"    \n"
+"    Връща �ъ�то�ние 0 или 1 в зави�имо�т от оценката на у�ловни� ИЗР�З.\n"
+"    Изразите �а �ъ�тавени от �ъщите примитиви, както вградената команда "
+"„test“\n"
+"    и могат да �е �ъчетават чрез �ледните оператори:\n"
+"    \n"
+"      ( ИЗР�З )  Връща �тойно�тта на ИЗР�За\n"
+"      ! ИЗР�З    И�тина, ако ИЗР�З �е оцен� на лъжа, в о�таналите �лучаи е "
+"лъжа\n"
+"      ИЗР�З_1 && ИЗР�З_2\n"
+"                 И�тина, ако едновременно ИЗР�З_1 и ИЗР�З_2 �а и�тина, в\n"
+"                 о�таналите �лучаи е лъжа.\n"
+"      ИЗР�З_1 || ИЗР�З_2\n"
+"                 И�тина, ако поне едини�т от ИЗР�З_1 и ИЗР�З_2 е и�тина, в\n"
+"                 о�таналите �лучаи е лъжа.\n"
+"    \n"
+"    Когато �е използват операторите „==“ и „!=“, низът от д��ната �трана на\n"
+"    оператора �е използва като шаблон и �е извършва напа�ване.  Когато �е "
+"ползва\n"
+"    операторът „=~“, изразът от д��ната му �трана �е тълкува като регул�рен\n"
+"    израз.\n"
+"    \n"
+"    Операторите „&&“ и „||“ не оцен�т ИЗР�З_2, ако ИЗР�З_1 е до�татъчен за\n"
+"    определ�не на �тойно�тта на израза.\n"
+"    \n"
+"    Изходен код:\n"
+"    0 или едно �поред �тойно�тта на ИЗР�За."
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"Че�то използване промени на обвивката\n"
+"    \n"
+"    BASH_VERSION    Информаци� за вер�и�та на bash\n"
+"    CDPATH          Спи�ък � директории разделени � двоеточие, които да �е\n"
+"                    тър��т като аргументи за командата „cd“\n"
+"    GLOBIGNORE      Спи�ък � шаблони на файлови имена, разделени � "
+"двоеточие,\n"
+"                    които да �е игнорират от заме�тването на път�\n"
+"    HISTFILE        Името на файла, в който �е �ъхран�ва и�тори�та на "
+"командите\n"
+"    HISTFILESIZE    Мак�имални�т брой редове, които горни�т файл може да "
+"�ъдържа\n"
+"    HISTSIZE        Мак�имални�т брой редове, които една работеща обвивка "
+"може\n"
+"                    да до�тъпи\n"
+"    HOME            Пълни�т път до домашната ви директори�\n"
+"    HOSTNAME        Името на текущата машина\n"
+"    HOSTTYPE        Видът на проце�ора, под който работи текущата обвивка\n"
+"    IGNOREEOF       Управл�ва дей�твието на обвивката при �рещането на "
+"единичен\n"
+"                    знак за край на файл „EOF“.  �ко променливата е "
+"зададена, т�\n"
+"                    указва бро� на знаците „EOF“, който могат да �е �рещнат\n"
+"                    �амо�то�телно на един ред, преди обвивката да завърши "
+"работа\n"
+"                    и излезе (�тандартно е 10).  Когато променливата не е\n"
+"                    зададена, един „EOF“ означава край на вход�щите данни\n"
+"    MACHTYPE        �из, който опи�ва текущата �и�тема, на ко�то работи "
+"bash\n"
+"    MAILCHECK       Колко че�то bash да провер�ва за нови пи�ма (в �екунди)\n"
+"    MAILPATH        Спи�ък � файлове, които bash провер�ва за нови пи�ма\n"
+"    OSTYPE          Вер�и�та на Юник�, на ко�то работи bash\n"
+"    PATH            Спи�ък � директории, които да �е претър�ват за команди\n"
+"    PROMPT_COMMAND  Команда, ко�то да �е изпълн�ва преди отпечатването на\n"
+"                    о�новната под�казка на командни� ред\n"
+"    PS1             �из за о�новната под�казка\n"
+"    PS2             �из за втората под�казка\n"
+"    PWD             Пълни�т път и име на текущата директори�\n"
+"    SHELLOPTS       Спи�ък � включените опции на обвивката, разделени �\n"
+"                    двоеточие\n"
+"    TERM            Името на текущи� вид терминал\n"
+"    TIMEFORMAT      Изходни�т формат за �тати�тиката за времето за "
+"изпълнение на\n"
+"                    команда, който �е използва от запазената дума „time“\n"
+"    auto_resume     Стойно�т, ко�то не е „null“, означава, че командна "
+"дума,\n"
+"                    ко�то �е по�в�ва �амо�то�телно на ред, първо �е "
+"провер�ва в\n"
+"                    �пи�ъка � текущо �прените задачи.  �ко бъде открита "
+"там,\n"
+"                    задачата �е пу�ка и �е �лага на преден план.  Стойно�т\n"
+"                    „exact“ (�трого �ъвпадение) означава, че командната "
+"дума,\n"
+"                    тр�бва точно да �ъвпада � името на команда в �пи�ъка "
+"�ъ�\n"
+"                    �прени задачи.  Стойно�т „substring“ (�ъвпадение на "
+"подниз)\n"
+"                    означава, че командната дума тр�бва да е подниз на "
+"задачата.\n"
+"                    В��ка друга �тойно�т означава, че командата думата "
+"тр�бва да\n"
+"                    е началото на �пр�на задача\n"
+"    histchars       Знаци, които определ�т бързото заме�тване и това по "
+"и�тори�.\n"
+"                    Първи�т знак е за заме�тването по и�тори�, обикновено е "
+"„!“.\n"
+"                    Втори�т е за бързото заме�тване, обикновено е „^“.  "
+"Трети�т\n"
+"                    е за коментарите в и�тори�та, обикновено е „#“\n"
+"    HISTIGNORE      Спи�ък � шаблони, разделени � двоеточие, които указват "
+"кои\n"
+"                    команди да не �е запазват в и�тори�та\n"
+
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Добав�не на директории в �тека.\n"
+"    \n"
+"    Добав� директори� в �тека на директориите или превърта �тека\n"
+"    като най-горна директори� �тава текущата директори�.  Без\n"
+"    аргументи �мен� най-горните две директории.\n"
+"    \n"
+"    -n  подти�кане на нормалното преминаване към директори� при изваждането "
+"на\n"
+"        директори� към �тека, така че �е промен� �амо той.\n"
+"    \n"
+"    �ргументи:\n"
+"      +N   Превърта �тека, така че N-тата директори� (като �е брои от "
+"л�вата \n"
+"           �трана на �пи�ъка, изведен от командата „dirs“ като �е почва от "
+"0)\n"
+"           да е най-отгоре.\n"
+"    \n"
+"      -N   Превърта �тека, така че N-тата директори� (като �е брои от "
+"д��ната\n"
+"           �трана на �пи�ъка, изведен от командата „dirs“ като �е почва от "
+"0)\n"
+"           да е най-отгоре.\n"
+"    \n"
+"    \n"
+"      dir  Добав� ДИРектори�та най-отгоре в �тека, като � прави новата "
+"текуща\n"
+"           работна директори�.\n"
+"    \n"
+"    Можете да изведете �тека на директори�та � командата „dirs“.\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен ако е подаден неправилен аргумент или не може да �е премине "
+"към\n"
+"    �ъответната директори�."
+
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Изваждане на директории от �тека.\n"
+"    \n"
+"    Маха директории от �тека � т�х. Без аргументи премахва по�ледната "
+"директори�\n"
+"    в �тека и влиза в новата по�ледна директори�.\n"
+"    \n"
+"    Опции:\n"
+"    -n  подти�кане на нормалното преминаване към директори� при изваждането "
+"на\n"
+"        директори� към �тека, така че �е промен� �амо той.\n"
+"    \n"
+"    �ргументи:\n"
+"    \n"
+"    +N  премахва N-ти� елемент като �е брои отл�во в �пи�ъка изведен от\n"
+"        командата „dirs“, като �е брои от 0.  �апр.: „popd +0“ премахва\n"
+"        първата директори�, „popd +1“ - втората.\n"
+"    \n"
+"    -N  премахва N-ти� елемент като �е брои отд��но в �пи�ъка изведен от\n"
+"        командата „dirs“, като �е брои от 0.  �апр.: „popd -0“ премахва\n"
+"        по�ледната директори�, „popd -1“ - предпо�ледната.\n"
+"    \n"
+"    Стекът � директориите �е визуализира � командата „dirs“.\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен ако е подаден неправилен аргумент или не може да �е премине "
+"към\n"
+"    �ъответната директори�."
+
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Извеждане на �тека на директориите.\n"
+"    \n"
+"    Отпечатва �пи�ъка � текущо запомнените директории.  Спи�ъкът �е попълва "
+"чрез\n"
+"    командата „pushd“.  Можете да вадите директории от �тека � командата\n"
+"    „popd“.\n"
+"    \n"
+"    Опции:\n"
+"     -c  изчи�тване на �тека на директориите като изтрива в�ички елементи\n"
+"     -l  извеждане на пълните имена на директориите, а не �ъкратените "
+"�пр�мо\n"
+"         домашната директори� имена („/homes/pesho/bin“, а не „~/bin“)\n"
+"     -p  поредово отпечатване без поредни� номер в �тека\n"
+"     -v  поредово отпечатване заедно � поредни� номер в �тека\n"
+"    \n"
+"    �ргументи: \n"
+"     +N  извежда N-ти� елемент отл�во в �пи�ъка отпечатан от командата "
+"„dirs“,\n"
+"         когато е �тартирана без опции.  Брои �е от 0.\n"
+"     -N  извежда N-ти� елемент отд��но в �пи�ъка отпечатан от командата "
+"„dirs“,\n"
+"         когато е �тартирана без опции.  Брои �е от 0.\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен ако е дадена неправилна опци� или възникне грешка."
+
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"Включване и изключване на опции на обвивката.\n"
+"    \n"
+"    Превключване на �ъ�то�нието на в��ка от дадените ОПЦИи на обвивката.  "
+"�ко не\n"
+"    не �а зададени аргументи, �е извежда �пи�ък от � дадените ОПЦИи или "
+"в�ички,\n"
+"    ако не �а дадени такива, като �е указва за в��ка дали и включена или "
+"не.\n"
+"    \n"
+"    Опции:\n"
+"      -o    ограничаване на опциите до определените за използване �ъ� „set -"
+"o“\n"
+"      -p    извеждане на в��ка опци� � означение дали е включена или не\n"
+"      -q    без извеждане на информаци�\n"
+"      -s    включване на в��ка от ОПЦИИте\n"
+"      -u    изключване на в��ка от ОПЦИИте\n"
+"    \n"
+"    Изходен код:\n"
+"    0, ако ОПЦИЯта е включена, грешка, ако е зададена неправилна или "
+"изключена\n"
+"    ОПЦИЯ."
+
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"Форматиране и отпечатване на �РГУМЕ�ТИте �поред управлението на ФОРМ�Та.\n"
+"    \n"
+"    Опции:\n"
+"      -v ПРОМЕ�ЛИВ�  изходът �е по�тав� в ПРОМЕ�ЛИВ�та на обвивката, вме�то "
+"да\n"
+"      �е извежда на �тандартни� изход.\n"
+"    \n"
+"    ФОРМ�Тът е по�ледователно�т от знаци, ко�то �ъдържа три вида обекти:\n"
+"    � обикновени знаци, които биват отпечатани директно на �тандартни� "
+"изход;\n"
+"    � екраниращи знакови по�ледователно�ти, които биват преобразувани и\n"
+"      отпечатани на �тандартни� изход;\n"
+"    � форматиращи знакови по�ледователно�ти, в��ка от които предизвиква\n"
+"      отпечатването на �ледващ аргумент.\n"
+"    \n"
+"    О�вен �тандартните форматирани� опи�ани в ръковод�твото на printf(1), "
+"printf\n"
+"    приема и �ледните ин�трукции:\n"
+"      %b      предизвиква заме�тването на екранирани�та � обратно наклонени\n"
+"              черти в �ъответни� аргумент\n"
+"      %q      предизвиква цитирането на аргумента, така че да може да бъде\n"
+"              използван като вход за обвивката\n"
+"      %(fmt)  отпечатване на низа при третиране на аргумента като дата и "
+"време\n"
+"              �поред strftime(3)\n"
+"    \n"
+"    Форматът �е преизползва до приемането на в�ички аргументи.  �ко има по-\n"
+"    малко аргументи от по�очените във форма̀та, поведението на допълнителните "
+"е\n"
+"    в�е едно за аргумент да �а подадени нулева �тойно�т или празен низ.\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен ако не е дадена неправилна опци� или възникне грешка при\n"
+"    извеждането на резултата или при при�во�ването на �тойно�тта."
+
+#: builtins.c:1971
+#, fuzzy
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Указване на начина на автоматичното допи�ване на аргументите от Readline.\n"
+"    \n"
+"    За в��ко ИМЕ �е извежда начинът за допи�ване на аргументите.  �ко не �а\n"
+"    дадени никакви опции, �е извеждат текущите ин�трукции за автоматично\n"
+"    допи�ване във формат, който може да �е използва за вход.\n"
+"    \n"
+"    Опции:\n"
+"      -p  Извеждане на текущите ин�трукции за автоматично допи�ване във "
+"формат,\n"
+"          който може да �е използва за вход\n"
+"      -r  Премахване на ин�трукциите за автоматично допи�ване на в��ко ИМЕ, "
+"а\n"
+"          когато такова не е указано — в�ички ин�трукции\n"
+"      -D  Прилагане на допи�вани�та и дей�тви�та като �тандартните за "
+"командите,\n"
+"          без никакви �пецифични ин�трукции\n"
+"      -E  Прилагане на допи�вани�та и дей�тви�та като тези на „празната“\n"
+"          команда — когато в�е още нищо не е напи�ано на командни� ред\n"
+"      -I  Прилагане на допи�вани�та и дей�тви�та към първата дума "
+"(обикновено\n"
+"          това е командата)\n"
+"    \n"
+"    При извършване на автоматично допи�ване, дей�тви�та �е прилагат в реда "
+"на\n"
+"    опциите � главна буква дадени по-горе.  Опци�та „-D“ е � по-ви�ок "
+"приоритет\n"
+"    от „-E“, ко�то има по-ви�ок приоритет от „-I“.\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен когато е дадена неправилна опци� или възникне грешка."
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Извеждане на възможните допи�вани�.\n"
+"    \n"
+"    Целта е да �е ползва в рамките функци� на обвивката, ко�то генерира\n"
+"    възможните допи�вани�.  �ко е зададен незадължителни�т аргумент ДУМ�,\n"
+"    генерират �е напа�вани�та � него.\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен ако е дадена неправилна опци� или възникне грешка."
+
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"Промен�не или извеждане на опциите за допи�ване.\n"
+"    \n"
+"    Промен�не на опциите допи�ване за в��ко ИМЕ, или когато не �а указани\n"
+"    ИМЕна — допи�ването, което �е изпълн�ва в момента.  �ко не �а зададени\n"
+"    ОПЦИи, извеждане на на опциите за допи�ване за в��ко име или за текущо\n"
+"    изпълн�ваното допи�ване.\n"
+"    \n"
+"    Опции:\n"
+"      -o ОПЦИЯ\n"
+"            Задаване ОПЦИЯта за допи�ване за в��ко зададено ИМЕ\n"
+"      -D    Задаване на опциите за „�тандартното“ допи�ване на команда\n"
+"      -E    Задаване на опциите за допи�ването на „празната“ команда\n"
+"      -I    Задаване на опциите за допи�ването на първата дума\n"
+"    Използването на „+o“ вме�то „-o“ изключва дадената опци�.\n"
+"    \n"
+"    �ргументи:\n"
+"    \n"
+"    В��ко ИМЕ указва команда, за ко�то тр�бва предварително да е зададена\n"
+"    �пецификаци� за допи�ване чрез вградената команда „complete“.  �ко не "
+"�а\n"
+"    зададени ИМЕна, командата „compopt“ тр�бва да бъде изпълнена от "
+"функци�,\n"
+"    ко�то генерира �пецификациите за допи�ване.  В този �лучай опциите за "
+"текущо\n"
+"    изпълн�вани� генератор на допи�вани� �е промен�т.\n"
+"    \n"
+"    Изходен код:\n"
+"    0, о�вен когато е дадена неправилна опци� или лип�ват ин�трукции към "
+"ИМЕто\n"
+"    за автоматично допи�ване."
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"Изчитане на редове от �тандартни� вход и запазване в променлива — "
+"индек�иран\n"
+"    низ.\n"
+"    \n"
+"    Прочитане на редове от �тандартни� вход, които �лед това �е запазват в\n"
+"    променливата М�СИВ.  Когато е дадена опци�та „-u“, �е чете от\n"
+"    Ф�ЙЛов_ДЕСКРиптор.  Стандартното име на променливата-ма�ив е MAPFILE.\n"
+"    \n"
+"    Опции:\n"
+"      -d Р�ЗДЕЛИТЕЛ Р�ЗДЕЛ�не на редовете � този знак, а не � нов ред\n"
+"      -n М�КС_РЕД�  Изчитане на не повече от М�КСимум РЕДа.  �ко е 0, �е\n"
+"                    прочитат в�ички редове\n"
+"      -O ��Ч�ЛО     При�во�ването да започне при индек� ��Ч�ЛО в М�СИВа\n"
+"                    Стандартната �тойно�т е 0\n"
+"      -s БРОЙ_ПРОП  Пре�качане на първите БРОЙ за ПРОПу�кане прочетени реда\n"
+"      -t            Премахване на по�ледващи� знак-Р�ЗДЕЛител от в�еки ред\n"
+"                    (�тандартно е знакът за нов ред)\n"
+"      -u Ф�ЙЛов_ДЕСКРиптор\n"
+"                    Изчитане на редовете от Ф�ЙЛов_ДЕСКРиптор, а не "
+"�тандартни�\n"
+"                    вход\n"
+"      -C ФУ�КЦИЯ    Функци�, ко�то �е извиква при изчитането на в�еки "
+"БРОЙ_РЕД�\n"
+"      -c БРОЙ_РЕД�  Редове, които да �е изчетат преди да �е извика "
+"ФУ�КЦИЯта\n"
+"    \n"
+"    �ргументи:\n"
+"      М�СИВ         Име на променливата-ма�ив\n"
+"    \n"
+"    �ко опци�та „-C“ е зададена без „-c“, �тандартни� БРОЙ_РЕД� е 5000.  "
+"При\n"
+"    извикването на ФУ�КЦИЯта за аргументи � �е подават индек�а на �ледващи�\n"
+"    елемент от ма�ива и реда, който �е �чита за �тойно�т.\n"
+"    \n"
+"    �ко не е дадено изрично ��Ч�ЛО, командата „mapfile“ изчи�тва М�СИВа, "
+"преди\n"
+"    да започне при�во�ването към него.\n"
+"    \n"
+"    Изходен код:\n"
+"    Връща 0, о�вен ако е дадена неправилна опци� или ако М�СИВът е "
+"променлива\n"
+"    �амо за четене или не е индек�иран ма�ив."
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Прочитане на редове от файл и по�тав�не в променлива – ма�ив.\n"
+"    \n"
+"    Синоним на „mapfile“."
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "Връща контек�та на текущото извикване на функци�.\n"
+#~ "    \n"
+#~ "    Без ИЗР�З връща "
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "добав�не на проце�: проце�ът %5ld (%s) е в програмни� канал"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "�епознат �игнал #"
diff --git a/po/boldquot.sed b/po/boldquot.sed
new file mode 100644
index 0000000..4b937aa
--- /dev/null
+++ b/po/boldquot.sed
@@ -0,0 +1,10 @@
+s/"\([^"]*\)"/“\1�/g
+s/`\([^`']*\)'/‘\1’/g
+s/ '\([^`']*\)' / ‘\1’ /g
+s/ '\([^`']*\)'$/ ‘\1’/g
+s/^'\([^`']*\)' /‘\1’ /g
+s/“�/""/g
+s/“/“/g
+s/�/�/g
+s/‘/‘/g
+s/’/’/g
diff --git a/po/ca.gmo b/po/ca.gmo
new file mode 100644
index 0000000..0b94a7a
--- /dev/null
+++ b/po/ca.gmo
diff --git a/po/ca.po b/po/ca.po
new file mode 100644
index 0000000..f1cadd2
--- /dev/null
+++ b/po/ca.po
@@ -0,0 +1,5985 @@
+# Catalan messages for GNU bash.
+# Copyright (C) 2002, 2003, 2010, 2014, 2015, 2017 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+# Montxo Vicente i Sempere <montxo@enmoviment.com>, 2003 (traducció), 2010 (revisions).
+# Jordi Mas i Hernàndez <jmas@softcatala.org>, 2004 (correccions).
+# Ernest Adrogué Calveras <eadrogue@gmx.net>, 2014, 2015, 2017.
+msgid ""
+msgstr ""
+"Project-Id-Version: bash-4.4\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2017-01-10 20:11+0100\n"
+"Last-Translator: Ernest Adrogué Calveras <eadrogue@gmx.net>\n"
+"Language-Team: Catalan <ca@dodds.net>\n"
+"Language: ca\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "subíndex erroni"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr "%s: s'elimina l'atribut «nameref»"
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: no és possible convertir un vector indexat en associatiu"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: clau de vector associatiu no vàlida"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: no es pot assignar a un índex no-numèric"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr "%s: %s: l'assignació en vectors associatius requereix un subíndex"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: no es pot crear: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr ""
+"bash_execute_unix_command: no s'ha trobat el mapa de tecles per a l'ordre"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: el primer caràcter no-blanc no és «\"»"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "falta un caràcter de tancament «%c» a %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: falta un caràcter «:» de separació"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "«%s»: no es pot desvincular"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr "expansió de claus: no es pot assignar memòria per a %s"
+
+#: braces.c:406
+#, fuzzy, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr "expansió de claus: ha fallat l'assignació de memòria per a %d elements"
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr "expansió de claus: ha fallat l'assignació de memòria per a «%s»"
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "«%s»: el nom de l'àlies no és valid"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "l'edició de línia no està habilitada"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "«%s»: el nom del mapa de tecles no és vàlid"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: no es pot llegir: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "«%s»: nom de funció desconegut"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s no està vinculat a cap tecla.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s pot ser invocat via "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "«%s»: no es pot desvincular"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "nombre d'iteracions"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "només té sentit en una iteració de tipus «for», «while» o «until»"
+
+# help caller
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Retorna el context de la subrutina actual.\n"
+"\n"
+"    Sense EXPR, torna \"$línia $nomfitxer\".  Amb EXPR, torna \"$línia\n"
+"    $subrutina $nomfitxer\"; aquesta informació addicional es pot utilitzar\n"
+"    per a proporcionar un traçat de la pila.\n"
+"\n"
+"    El valor de EXPR indica quants «frames» retrocedir des de l'actual; el\n"
+"    «frame» superior és el 0.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Retorna 0 excepte si l'intèrpret no està executant una funció o si EXPR\n"
+"    no és una expressió vàlida."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "la variable HOME no està definida"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "sobren arguments"
+
+#: builtins/cd.def:342
+msgid "null directory"
+msgstr "directori nul"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "la variable OLDPWD no està definida"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "línia %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "atenció: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: sintaxi: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: l'opció requereix un argument"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: falta un argument numèric"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: no s'ha trobat"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: l'opció no és vàlida"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: el nom de l'opció no és vàlid"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "«%s»: no és un identificador vàlid"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "nombre octal no vàlid"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "nombre hexadecimal no vàlid"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "nombre no vàlid"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: especificació de senyal no vàlida"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "«%s»: pid o especificació de feina no vàlids"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: variable de només lectura"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s fora del domini"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "argument"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s fora del domini"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: no existeix tal feina"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: no hi ha control de feines"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "no hi ha control de feines"
+
+# cd .. en un intèrpret restringit
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: restringit"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "restringit"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: no és una ordre interna de l'intèrpret"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "error d'escriptura: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "error en establir els atributs del terminal: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "error en obtenir els atributs del terminal: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: error en obtenir el directori actual: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: l'especificació de feina és ambigua"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr "aquesta versió no té ajuda disponible"
+
+# unset UID
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: no es pot suprimir: %s de només lectura"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: no es pot suprimir"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: nom d'acció no vàlid"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: no hi ha especificació de compleció"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "atenció: l'opció -F pot no funcionar com us espereu"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "atenció: l'opció -C pot no funcionar com us espereu"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "no s'està executant una funció de compleció"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "només es pot utilitzar en una funció"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr "%s: una variable referència no pot ser un vector"
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr "%s: no es permeten autoreferències en variables referència"
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s: referència circular"
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "«%s»: la variable referència conté un nom de variable no vàlid"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "no és possible usar «-f» per convertir en funció"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: funció de només lectura"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr ""
+"%s: es desaconsella l'assignació múltiple en vectors utilitzant cometes"
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: no és possible destruir variables vector d'aquesta manera"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: no és possible convertir un vector associatiu en indexat"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "no es poden carregar biblioteques dinàmicament"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "no es pot obrir l'objecte compartit %s: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "no s'ha trobat %s a l'objecte compartit %s: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: no s'ha carregat dinàmicament"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr "l'intent de carregar %s ha fallat (%d): no carregat"
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: no s'ha carregat dinàmicament"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: no es pot eliminar: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: és un directori"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: no és un fitxer ordinari"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: el fitxer és massa gran"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: no es poden executar fitxers binaris"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: no es pot executar: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "desconnectat\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "no és una sessió d'entrada: utilitzeu «exit»"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Hi ha feines aturades.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Hi ha feines en funcionament.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "no s'ha trobat cap ordre"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "especificació d'historial"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: no es pot obrir el fitxer temporal: %s"
+
+# fg  quan no hi ha cap feina en segon pla
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "actual"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "la feina %d es va iniciar sense control de feines"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: opció il·legal -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: l'opció requereix un argument -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "el «hashing» està deshabilitat"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: la taula «hash» és buida\n"
+
+# hash  (sense arguments)
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "vegades\tordre\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Ordres de l'intèrpret coincidents amb '"
+msgstr[1] "Ordres de l'intèrpret coincidents amb '"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"no hi ha ajuda sobre «%s».  Proveu «help help», «man -k %s» o «info %s»."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: no es pot obrir: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Aquestes ordres de l'intèrpret estan definides internament.\n"
+"Feu «help» per a veure'n una llista.  \n"
+"Feu «help nom» per a obtenir informació sobre la funció «nom».\n"
+"Feu «info bash» per a obtenir informació general sobre l'intèrpret.\n"
+"Feu «man -k» o «info» per a obtenir informació sobre altres programes.\n"
+"\n"
+"Un asterisc (*) significa que l'ordre està deshabilitada.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "no és possible usar més d'una opció d'entre -anrw"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "posició a l'historial"
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: la marca horària no és vàlida"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: ha fallat l'expansió de l'historial"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: inlib ha fallat"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "no es permeten altres opcions amb «-x»"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: els arguments han de ser ids de processos o feines"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Error desconegut"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "s'esperava una expressió"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: no és un vector indexat"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: l'especificació de descriptor de fitxer no és vàlida"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: el descriptor de fitxer no és vàlid: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: el nombre de línies no és vàlid"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: l'origen del vector no és vàlid"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: el quàntum de retorn no és vàlid"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "nom de variable vector en blanc"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "fa falta suport per a variables vector"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "«%s»: falta un caràcter de format"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "«%c»: l'especificació de format de temps no és vàlida"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "«%c»: el caràcter de format no és vàlid"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "atenció: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "problema en interpretar el format: %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "falta un dígit hexadecimal a \\x"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "falta un dígit Unicode a \\%c"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "no hi ha més directoris"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s: l'argument no és vàlid"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<no hi ha directori actual>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "la pila de directoris està buida"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "índex de la pila de directoris"
+
+# còpia parcial d'una altra cadena - l'original es troba més endavant
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Mostra la llista actual de directoris recordats.  Els directoris són "
+"afegits\n"
+"    a la llista mitjançant l'ordre «pushd»; podeu recórrer la llista de\n"
+"    directoris cap enrere amb l'ordre «popd».\n"
+"\n"
+"    Opcions:\n"
+"      -c        neteja la pila, esborrant-ne tots els elements\n"
+"      -l        no mostra les versions abreviades (amb el prefix ~) dels\n"
+"                directoris relatius al vostre directori personal\n"
+"      -p        mostra la pila, una entrada per línia\n"
+"      -v        mostra la pila, una entrada per línia indicant la posició a\n"
+"                la pila\n"
+"\n"
+"    Arguments:\n"
+"      +N        Mostra l'entrada N-èssima, comptant des de l'esquerra de la\n"
+"                llista mostrada per «dirs» quan s'invoca sense opcions, \n"
+"                començant des de zero.\n"
+"\n"
+"      -N        Mostra l'entrada N-èssima, comptant des de la dreta de la\n"
+"                llista mostrada per «dirs» quan s'invoca sense opcions,\n"
+"                començant des de zero."
+
+# còpia parcial d'una altra cadena - l'original es troba més endavant
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Afegeix un directori al capdamunt de la pila de directoris, o fa girar la\n"
+"    llista, de manera que al capdamunt de la pila hi queda el directori de\n"
+"    treball corrent.  Sense arguments, intercanvia els dos directoris de "
+"més\n"
+"    amunt.\n"
+"\n"
+"    Opcions:\n"
+"      -n        Omet el canvi de directori quan s'afegeixen directoris a la\n"
+"                pila, de manera que només canvia el contingut de la pila.\n"
+"\n"
+"    Arguments:\n"
+"\n"
+"      +N        Gira la llista de manera tal que l'N-èssim directori\n"
+"                (comptant des de l'esquerra de la llista que mostra «dirs»,\n"
+"                començant des de zero) queda a dalt de tot.\n"
+"\n"
+"      -N        Gira la llista de manera tal que l'N-èssim directori\n"
+"                (comptant des de la dreta de la llista que mostra «dirs»,\n"
+"                començant des de zero) queda a dalt de tot.\n"
+"\n"
+"      dir       Afegeix DIR al capdamunt de la pila de directoris, i el\n"
+"                converteix en el nou directori de treball corrent.\n"
+"\n"
+"    Podeu veure el contingut de la pila de directoris amb l'ordre «dirs»."
+
+# còpia parcial d'una altra cadena - l'original es troba més endavant
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Elimina entrades de la pila de directoris.  Sense arguments, elimina el\n"
+"    directori al capdamunt de la pila, i canvia al nou directori de dalt de\n"
+"    la pila.\n"
+"\n"
+"    Opcions:\n"
+"      -n       Omet el canvi de directori quan s'eliminen directoris de la\n"
+"               pila, de manera que només canvia el contingut de la pila.\n"
+"\n"
+"    Arguments:\n"
+"      +N       Elimina l'entrada N-èssima, comptant des de l'esquerra de la\n"
+"               llista que mostra «dirs», començant des de zero.  Per\n"
+"               exemple: «popd +0» elimina el primer directori, i «popd +1»\n"
+"               el segon.\n"
+"\n"
+"      -N       Elimina l'entrada N-èssima, comptant des de la dreta de la\n"
+"               llista que mostra «dirs», començant des de zero.  Per\n"
+"               exemple: «popd -0» elimina l'últim directori, i «popd -1» el\n"
+"               penúltim.\n"
+"\n"
+"    Podeu veure el contingut de la pila de directoris amb l'ordre «dirs»."
+
+# read -t -5
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: el límit de temps no és vàlid"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "error de lectura: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr "només es permet fer «return» des d'una funció o script"
+
+# unset -f -v foo
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "no és possible suprimir una funció i una variable alhora"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: no és una variable vector"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: no és una funció"
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr "%s: no es pot exportar"
+
+# shift -4
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "nombre de «shifts»"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "no es poden activar i desactivar opcions de forma simultània"
+
+# shopt -s foo
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: l'opció de l'intèrpret no és vàlida"
+
+# source
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "fa falta un nom de fitxer"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: no s'ha trobat el fitxer"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "no es pot suspendre"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "no és possible suspendre un intèrpret d'entrada"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s és un àlies de «%s»\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s és una paraula clau de l'intèrpret\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s és una funció\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s és una ordre interna especial\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s és una ordre interna\n"
+
+# type dmesg
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s és %s\n"
+
+# hash cp; type cp
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s és a la taula «hash» (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: el límit no és vàlid"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "«%c»: ordre errònia"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: no es pot obtenir el límit: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "límit"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: no es pot modificar el límit: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "nombre octal"
+
+# umask z=rwx
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "«%c»: l'operador de mode simbòlic no és vàlid"
+
+# umask u=rwz
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "«%c»: el mode simbòlic conté caràcters no vàlids"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " línia "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "última ordre: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Avortant..."
+
+# prefix afegit als avisos infomatius interns (internal_inform)
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr "INFORMACIÓ: "
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "error no identificat"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "tipus d'ordre erroni"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "connector erroni"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "salt erroni"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: variable no definida"
+
+# SIGALRM
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\atemps esgotat mentre s'esperaven dades: autodesconnexió\n"
+
+# error intern
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "no s'ha pogut redirigir l'entrada estàndard des de /dev/null: %s"
+
+# error intern
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "TIMEFORMAT: «%c»: el caràcter de format no és vàlid"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr "execute_coproc: el coprocés [%d:%s] encara existeix"
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "error de canonada"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr "eval: excedit el nombre màxim d'avaluacions imbricades (%d)"
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr "%s: excedit el nombre màxim d'imbricacions per a «source» (%d)"
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr "%s: excedit el nombre màxim de funcions imbricades (%d)"
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: restricció: no podeu especificar «/» en noms d'ordres"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: no s'ha trobat l'ordre"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: intèrpret erroni"
+
+# error intern
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: no es pot executar el fitxer binari: %s"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "«%s»: és una ordre interna especial"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "no s'ha pogut duplicar l'fd %d com a fd %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "excedit el nivell màxim de recursivitat per a expressions"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "«underflow» a la pila de recursivitat"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "error de sintaxi a l'expressió"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "intent d'assignació a una no-variable"
+
+#: expr.c:530
+#, fuzzy
+msgid "syntax error in variable assignment"
+msgstr "error de sintaxi a l'expressió"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "divisió per 0"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "bug: el component «expassign» és erroni"
+
+# echo $((4 > 5 ? 0))
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "falta un caràcter «:» a l'expressió condicional"
+
+# echo $((4 ** -1))
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "exponent menor que 0"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "fa falta un identificador després del pre-increment o pre-decrement"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "falta un caràcter «)»"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "error de sintaxi: s'esperava un operand"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "error de sintaxi: l'operador aritmètic no és vàlid"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (l'element erroni és «%s»)"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "la base aritmètica no és vàlida"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: el nombre de línies no és vàlid"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "el valor de la base és massa gran"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: expressió errònia\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: els directoris superiors són inaccessibles"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "no s'ha pogut restablir el mode «nodelay» per a l'fd %d"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr "error en crear un fd nou a partir de l'fd %d"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input: ja existia un «buffer» per al nou fd %d"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: pgrp de la canonada"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "el pid bifurcat %d apareix a la feina en execució %d"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "s'elimina la feina aturada %d amb grup de procés %ld"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process: el pid %5ld (%s) està marcat com a viu"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: no existeix tal pid"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Senyal %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Fet"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Aturat"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Aturat(%s)"
+
+# ha de tenir menys de 10 caràcters o no queda alineat
+#: jobs.c:1892
+msgid "Running"
+msgstr "Funcionant"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Fet(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Sortida %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Estat desconegut"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(s'ha bolcat la memòria)"
+
+# wd = working directory
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (dt: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "setpgid (de %ld a %ld) per al procés inferior"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: el pid %ld no és un fill d'aquest intèrpret"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: No es té constància del procés %ld"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: la feina %d està aturada"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: no existeix tal feina"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: la feina ha acabat"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: la feina %d ja es troba en segon pla"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr "waitchld: s'activa «WNOHANG» per a evitar un bloqueig indefinit"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s línia %d: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (s'ha bolcat la memòria)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(dt ara: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: getpgrp ha fallat"
+
+#: jobs.c:4447
+#, fuzzy
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: disciplina de línia"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: disciplina de línia"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "no s'ha pogut establir el grup de procés del terminal (%d)"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "aquesta sessió no té control de feines"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: asserció fallida: %s\n"
+
+# error intern i el \r provoca warnings
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "desconegut"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: bloc abatussat a la llista de disponibles"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: cridat amb un argument de bloc ja alliberat"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: cridat amb un argument bloc no assignat"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: underflow detectat; mh_nbytes fora del domini"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: underflow detectat; mh_nbytes fora del domini"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: les mides inicial i final del fragment difereixen"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: cridat amb un argument de bloc no assignat"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc: underflow detectat: mh_nbytes fora del domini"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc: underflow detectat: mh_nbytes fora del domini"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: les mides inicial i final del fragment difereixen"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: la taula «alloc» està plena de «FIND_ALLOC»?\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: %p ja es troba a la taula com a assignat?\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: %p ja es troba a la taula com a lliure?\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "base no vàlida"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: màquina desconeguda"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: el servei no és vàlid"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: la ubicació remota no és vàlida"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "les operacions de xarxa no estan suportades"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: no s'ha pogut canviar el local (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: no s'ha pogut canviar el local (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: no s'ha pogut canviar el local (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: no s'ha pogut canviar el local (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "Teniu correu a $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "Teniu correu nou a $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "El correu a %s ha estat llegit\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "error de sintaxi: fa falta una expressió aritmètica"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "error de sintaxi: «;» inesperat"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "error de sintaxi: «((%s))»"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: tipus d'instrucció erroni %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr "document literal a la línia %d delimitat per EOF (volia «%s»)"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr "make_redirection: instrucció de redirecció «%d» fora del domini"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+"shell_getc: shell_input_line_size (%zu) excedeix «SIZE_MAX» (%lu): línia "
+"truncada"
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr "excedit el nombre màxim de documents literals"
+
+# "echo $(echo" en un script
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "EOF inesperat mentre es cercava «%c»"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "EOF inesperat mentre es cercava «]]»"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "error de sintaxi a l'expressió condicional: element «%s» inesperat"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "error de sintaxi a l'expressió condicional"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "element «%s» inesperat, s'esperava «)»"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "s'esperava «)»"
+
+# [[ -d ]]
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "argument «%s» inesperat a un operador unari condicional"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "argument inesperat a un operador unari condicional"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "element «%s» inesperat, s'esperava un operador binari condicional"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "s'esperava un operador binari condicional"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "argument inesperat «%s» a un operador binari condicional"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "argument inesperat a un operador binari condicional"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "element «%c» inesperat en una ordre condicional"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "element «%s» inesperat en una ordre condicional"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "element %d inesperat en una ordre condicional"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "error de sintaxi a prop de l'element inesperat «%s»"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "error de sintaxi a prop de «%s»"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "error de sintaxi: final de fitxer inesperat"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "error de sintaxi"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Useu \"%s\" per a abandonar l'intèrpret.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "EOF inesperat mentre es cercava un «)»"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "completion: la funció «%s» no s'ha trobat"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr "programmable_completion: %s: possible reintent cíclic"
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: el paràmetre «COMPSPEC» és NUL"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: el connector «%d» és erroni"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: el descriptor de fitxer no és vàlid"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: el punter de fitxer és NUL"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != fileno xtrace fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: «%c»: el caràcter de format no és vàlid"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "descriptor de fitxer fora del domini"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: redirecció ambigua"
+
+# opció noclobber
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: no es pot escriure sobre un fitxer existent"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: restricció: no podeu redirigir la sortida"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "no s'ha pogut crear el fitxer temporal per a un document literal: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: no és possible assignar un fd a una variable"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "/dev/(tcp|udp)/host/port no està suportat si no hi ha xarxa"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "error de redirecció: no es pot duplicar l'fd"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "no s'ha trobat el directori /tmp, sis-plau creeu-lo!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp ha de ser un nom de directori vàlid"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr ""
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: l'opció no és vàlida"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "no s'ha pogut establir l'uid com a %d: uid effectiu %d"
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "no s'ha pogut establir el gid com a %d: gid effectiu %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr "no es pot iniciar el depurador; mode de depuració desactivat"
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr "%s: És un directori"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "No teniu nom!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, versió %s-(%s)\n"
+
+#
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Sintaxi:  %s [opció GNU llarga] [opció] ...\n"
+"          %s [opció GNU llarga] [opció] fitxer-script ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "Opcions GNU llargues:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Opcions de l'intèrpret:\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-ilrsD, o -c ordre, o bé -O opció_intèrpret\t(només invocació)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s, o bé -o opció\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+"Feu «%s -c \"help set\"» per a informació sobre les opcions de l'intèrpret.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr "Feu «%s -c help» per a obtenir informació sobre les ordres internes.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "Feu servir l'ordre «bashbug» per a informar de «bugs».\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr "pàgina web de bash: <http://www.gnu.org/software/bash>\n"
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr "Ajuda general per a programari GNU: <http://www.gnu.org/gethelp/>\n"
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: l'operació no és vàlida"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Senyal no fiable"
+
+# Senyals POSIX
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Desconnexió"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Interrupció"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Sortida"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Instrucció il·legal"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "Traçat/trampa BPT"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "Instrucció «ABORT»"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "Instrucció «EMT»"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Excepció de coma flotant"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Mort"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Error de bus"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Violació de segment"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Crida de sistema errònia"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Canonada trencada"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Alarma"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Finalitzat"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Estat E/S urgent"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Aturat (senyal)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Continua"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Procés inferior mort o aturat"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Aturat (entrada tty)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Aturat (sortida tty)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "E/S a punt"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "Limitació de CPU"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "Limitació de fitxers"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Alarma (virtual)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Alarma (perfil)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Canvi de finestra"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Bloqueig de registre"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Senyal d'usuari 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Senyal d'usuari 2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "Dades HFT d'entrada pendents"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "fallada imminent de l'alimentació"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "fallada imminent del sistema"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "migració del procés a una altra CPU"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "error de programació"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "mode de monitoratge HFT concedit"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "mode de monitoratge HFT retractat"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "seqüència d'àudio HFT completada"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "Petició d'informació"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "Senyal Desconegut #%d"
+
+# missatge similar a subst.c:75XX
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "substitució errònia: falta un «%s» a %s"
+
+# foo[1]=(1 2 3)
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: no és possible assignar llistes a l'element d'un vector"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "no s'ha pogut crear la canonada per a la substitució de procés"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "no s'ha pogut crear el fill per a la substitució de procés"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "no s'ha pogut obrir la canonada %s per a lectura"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "no s'ha pogut obrir la canonada %s per a escriptura"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "no s'ha pogut duplicar la canonada %s com a fd %d"
+
+#: subst.c:6213
+msgid "command substitution: ignored null byte in input"
+msgstr "substitució d'ordre: s'ignora un octet nul en l'entrada"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "no s'ha pogut crear la canonada per a la substitució d'ordre"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "no s'ha pogut crear un fill per a la substitució d'ordre"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute: no s'ha pogut duplicar la canonada com a fd 1"
+
+# buscar context
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: el nom de la variable referenciada no és vàlid"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: expansió indirecta no vàlida"
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr "%s: nom de variable no vàlid"
+
+#: subst.c:7256
+#, fuzzy, c-format
+msgid "%s: parameter not set"
+msgstr "%s: paràmetre nul o no definit"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: paràmetre nul o no definit"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: expressió de subcadena < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: substitució errònia"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: no és possible assignar d'aquesta manera"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr "en futures versions de bash s'avaluarà com a substitució aritmètica"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "subtitució errònia: falta un caràcter «`» final a %s"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "cap coincidència: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "s'esperava un argument"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: s'esperava una expressió amb enters"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "s'esperava «)»"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "s'esperava «)», s'ha trobat %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: s'esperava un operador binari"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: s'esperava un operador unari"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "falta un «]»"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "error de sintaxi: «;» inesperat"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "el número de senyal no és vàlid"
+
+#: trap.c:325
+#, fuzzy, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr "eval: excedit el nombre màxim d'avaluacions imbricades (%d)"
+
+# internal warning
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: valor incorrecte a trap_list[%d]: %p"
+
+# internal warning
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: senyal erroni %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "error en importar la definició de funció de «%s»"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "el nivell de l'intèrpret (%d) és massa elevat, es restableix a 1"
+
+# error intern
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr ""
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: no és possible assignar un valor a la variable"
+
+# buscar context
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr "%s: assignació numèrica a una variable referència"
+
+# error intern
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr ""
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "el paràmetre «exportstr» de la variable %s és nul"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "el caràcter %d en el paràmetre «exportstr» de %s no és vàlid"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "falta un «=» en el paràmetre «exportstr» de %s"
+
+# error intern
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr ""
+
+# error intern
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr ""
+
+# error intern
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr ""
+
+# error intern
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: no s'ha pogut obrir com a FITXER"
+
+# error intern
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr ""
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s: el valor de compatibilitat és fora del domini"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Copyright (C) 2012 Free Software Foundation, Inc."
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"Llicència GPLv3+: GNU GPL versió 3 o posterior\n"
+"  <http://gnu.org/licenses/gpl.html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, versió %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr ""
+"Aquest programa és lliure; sou lliures de modificar-lo i redistribuir-lo."
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "No té CAP GARANTIA, fins a l'extrem permès per la llei."
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: no s'han pogut assignar %lu octets (%lu octets assignats)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: no s'han pogut assignar %lu octets"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: no s'han pogut assignar %lu octets (%lu octets assignats)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: no s'han pogut assignar %lu octets"
+
+# help alias
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [nom[=valor] ...]"
+
+# help unalias
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] nom [nom ...]"
+
+# help bind
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpsvPSVX] [-m mapa] [-f fitxer] [-q nom] [-u nom] [-r tecles] [-x "
+"tecles:ordre-intèrpret] [tecles:funció-readline o ordre-readline]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [ordre-interna [arg ...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [expr]"
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]] [-@]] [dir]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] ordre [arg ...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilnrtux] [-p] [nom[=valor] ...]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilnrtux] [-p] nom[=valor] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [opció] nom[=valor] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [arg ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [arg ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f fitxer] [nom ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [arg ...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts cadena nom [arg]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a nom] [ordre [arguments ...]] [redirecció ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr "fc [-e editor] [-lnr] [primer] [últim] o fc -s [pat=sub] [ordre]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [feina]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [feina ...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p ubicació] [-dt] [nom ...]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [patró ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d offset] [n] o history -anrw [fitxer] o history -ps arg "
+"[arg...]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [feina ...] o jobs -x ordre [args]"
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [feina ... | pid ...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s senyal | -n númsenyal | -senyal] pid | feina ... o kill -l [senyal]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let arg [arg ...]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a vector] [-d delim] [-i text] [-n núm] [-N núm] [-p introd] [-"
+"t espera] [-u fd] [nom ...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o nom-opció] [--] [arg ...]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [nom ...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [nom[=valor] ...] o bé export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [nom[=valor] ...] o bé readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source fitxer [arguments]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". fitxer [arguments]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [expr]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ arg... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[arg] senyal ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] nom [nom ...]"
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [límit]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [mode]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-n] [id ...]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [pid ...]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for NOM [in PARAULES ... ] ; do ORDRES; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( exp1; exp2; exp3 )); do ORDRES; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select NOM [in PARAULES ... ;] do ORDRES; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] canonada"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case PARAULA in [PATRÓ [| PATRÓ]...) ORDRES ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if ORDRES; then ORDRES; [ elif ORDRES; then ORDRES; ]... [ else ORDRES; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while ORDRES; do ORDRES; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until ORDRES; do ORDRES; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [NOM] ordre [redireccions]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function nom { ORDRES ; } o bé nom () { ORDRES ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ ORDRES ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "feina [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( expressió ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ expressió ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "variables - Nom i significat d'algunes variables de l'intèrpret"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | dir]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [opció ...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v var] format [arguments]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DE] [-o opció] [-A acció] [-G patró] [-W "
+"llista]  [-F funció] [-C ordre] [-X filtre] [-P prefix] [-S sufix] [nom ...]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o opció] [-A acció] [-G patró] [-W paraules]\n"
+"[-F funció] [-C ordre] [-X filtre] [-P prefix] [-S sufix] [paraula]"
+
+#: builtins.c:239
+#, fuzzy
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o opció] [-DE] [nom ...]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-d delim] [-n nombre] [-O origen] [-s nombre] [-t] [-u fd] [-C "
+"callback] [-c quàntum] [vector]"
+
+#: builtins.c:244
+#, fuzzy
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-n nombre] [-O origen] [-s nombre] [-t] [-u fd] [-C callback] [-c "
+"quàntum] [vector]"
+
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Defineix o mostra àlies.\n"
+"\n"
+"    Sense arguments «alias» mostra la llista d'àlies definits, en format\n"
+"    «alias NOM=VALOR», a la sortida estàndard.\n"
+"\n"
+"    Altrament, defineix un àlies per a cada NOM per al qual existeix un\n"
+"    VALOR.  Un espai al final de VALOR fa que la paraula següent sigui\n"
+"    susceptible de ser substituïda per un àlies quan s'expandeix aquest\n"
+"    àlies.\n"
+"\n"
+"    Opcions:\n"
+"      -p        Mostra tots els àlies definits en format reutilitzable\n"
+"\n"
+"    Estat de sortida:\n"
+"    alias torna cert, excepte si NOM no correspon a cap àlies definit."
+
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Esborra tots els NOMs de la llista d'àlies definits.\n"
+"\n"
+"    Opcions:\n"
+"      -a        esborra totes les definicions d'àlies.\n"
+"\n"
+"    Torna cert, excepte si NOM no és un àlies existent."
+
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"Estableix vincles de tecla i variables Readline.\n"
+"\n"
+"    Vincula una seqüència de tecles a una funció o macro Readline, o bé\n"
+"    estableix una variable Readline.  La sintaxi dels arguments no-opcions\n"
+"    és la mateixa que en el fitxer ~/.inputrc, però ha de consistir en un\n"
+"    únic argument: per exemple, bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"\n"
+"    Opcions:\n"
+"      -m mapa     Usa MAPA com a mapa de tecles mentre duri aquesta\n"
+"                  ordre.  Els noms de mapes acceptables són emacs, emacs-\n"
+"                  standard, emacs-meta, emacs-ctlx, vi, vi-move, vi-"
+"command,\n"
+"                  i vi-insert.\n"
+"      -l          Mostra els noms de les funcions\n"
+"      -P          Mostra els noms de les funcions i els vincles de tecla.\n"
+"      -p          Mostra les funcions i els vincles en un format que es pot\n"
+"                  reutilitzar com a entrada.\n"
+"      -S          Mostra les seqüències de tecles que invoquen macros i els\n"
+"                  seus valors respectius.\n"
+"      -s          Mostra les seqüències de tecles que invoquen macros i els\n"
+"                  seus valors respectius en un format que es pot "
+"reutilitzar\n"
+"                  com a entrada.\n"
+"      -V          Mostra els noms de les variables i els seus valors.\n"
+"      -v          Mostra els noms de les variables i els seus respectius\n"
+"                  valors en un format que es pot reutilitzar com a entrada.\n"
+"      -q funció   Consulta quines tecles invoquen la funció especificada.\n"
+"      -u funció   Desvincula les tecles vinculades a la funció "
+"especificada.\n"
+"      -r tecles   Elimina el vincle associat a TECLES.\n"
+"      -f fitxer   Obté els vincles de tecles de FITXER.\n"
+"      -x tecles:ordre     Fa que s'executi ORDRE quan es prem TECLES.\n"
+"      -X          Mostra les tecles amb les respectives ordres vinculades\n"
+"                  amb l'opció -x, en un format reutilitzable com a entrada.\n"
+"\n"
+"    Estat de sortida:\n"
+"    bind torna 0 excepte si passeu una opció no reconeguda o es produeix\n"
+"    un error."
+
+# help break
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Surt de bucles for, while o until.\n"
+"\n"
+"    Surt d'un bucle FOR, WHILE o UNTIL.  Si especifiqueu N, trenca N bucles\n"
+"    de la imbricació.\n"
+"\n"
+"    Estat de sortida:\n"
+"    L'estat de sortida és 0 excepte si N és més petit que 1."
+
+# help continue
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Continua bucles for, while o until.\n"
+"\n"
+"    Executa la següent iteració en un bucle FOR, WHILE o UNTIL.  Si\n"
+"    especifiqueu N, continua el bucle N-èssim de la imbricació.\n"
+"\n"
+"    Estat de sortida:\n"
+"    L'estat de sortida és 0 excepte si N és més petit que 1."
+
+#: builtins.c:354
+#, fuzzy
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Executa ordres internes.\n"
+"\n"
+"    Executa ORDRE-INTERNA amb ARG com a arguments sense fer una cerca de\n"
+"    l'ordre.  Això és útil si voleu reimplementar una ordre interna de\n"
+"    l'intèrpret com a funció, però voleu executar l'ordre interna des de la\n"
+"    pròpia funció.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna l'estat de sortida de ORDRE-INTERNA, o fals si ORDRE-INTERNA no "
+"és\n"
+"    una ordre interna."
+
+# help caller
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Retorna el context de la subrutina actual.\n"
+"\n"
+"    Sense EXPR, torna \"$línia $nomfitxer\".  Amb EXPR, torna \"$línia\n"
+"    $subrutina $nomfitxer\"; aquesta informació addicional es pot utilitzar\n"
+"    per a proporcionar un traçat de la pila.\n"
+"\n"
+"    El valor de EXPR indica quants «frames» retrocedir des de l'actual; el\n"
+"    «frame» superior és el 0.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Retorna 0 excepte si l'intèrpret no està executant una funció o si EXPR\n"
+"    no és una expressió vàlida."
+
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"Canvia el directori de treball de l'intèrpret.\n"
+"\n"
+"    Canvia el directori actual a DIR.  Per defecte, DIR és el valor de la\n"
+"    variable HOME.\n"
+"\n"
+"    La variable CDPATH defineix els camins de cerca per al directori que\n"
+"    conté DIR.  Es poden especificar camins alternatius separats per dos\n"
+"    punts (:).  Un nom de directori nul s'interpreta com al directori\n"
+"    actual.  Si DIR comença amb una barra, aleshores no s'usa CDPATH.\n"
+"\n"
+"    Si no es troba el directori, i l'opció de l'intèrpret «cdable_vars» "
+"està\n"
+"    activada, aleshores la paraula s'interpreta com a un nom de variable.\n"
+"    Si la variable especificada té algun valor, aquest valor s'usa en lloc\n"
+"    de DIR.\n"
+"\n"
+"    Opcions:\n"
+"        -L      força el seguiment d'enllaços simbòlics: resol els enllaços\n"
+"                simbòlics que conté DIR després de processar «..»\n"
+"        -P      usa l'estructura de directoris física sense seguir "
+"possibles\n"
+"                enllaços simbòlics: resol els enllaços simbòlics que conté\n"
+"                DIR abans de processar «..»\n"
+"        -e      amb l'opció -P, si no es pot determinar el directori de\n"
+"                treball actual amb èxit, surt amb un estat diferent de zero\n"
+"        -@      en sistemes que ho suporten, presenta fitxers amb atributs\n"
+"                estesos com a directoris que contenen els atributs del\n"
+"                fitxer\n"
+"\n"
+"    Per defecte, se segueixen els enllaços simbòlics, com si "
+"especifiquéssiu\n"
+"    l'opció «-L».  El component «..» es processa eliminant el component del\n"
+"    camí immediatament previ fins a la primera barra o fins al principi de\n"
+"    DIR.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna 0 si s'ha canviat de directori, i si $PWD s'ha establert de forma\n"
+"    satisfactòria quan s'utilitza -P; altrament un valor diferent de zero."
+
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"Mostra el nom del directori de treball actual.\n"
+"\n"
+"    Opcions:\n"
+"      -L        mostra el valor de $PWD si és el nom del directori de\n"
+"                treball actual\n"
+"      -P        mostra el directori físic, sense cap enllaç simbòlic\n"
+"\n"
+"    Per defecte, «pwd» es comporta com si haguéssiu especificat «-L».\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna 0 excepte si heu especificat una opció no vàlida o no es pot\n"
+"    llegir el directori actual."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Ordre nul·la.\n"
+"\n"
+"    No té cap efecte; aquesta ordre no fa res.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Sempre reïx."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Torna un resultat reeixit.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Sempre reïx."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Torna un resultat fallit.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Sempre falla."
+
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Executa una ordre simple o mostra informació sobre ordres.\n"
+"\n"
+"    Executa ORDRE amb ARGS sense cercar funcions de l'intèrpret amb aquest\n"
+"    nom, o bé mostra informació sobre l'ORDRE especificada.  Es pot\n"
+"    utilitzar per a invocar programes en el disc, quan existeix una funció\n"
+"    amb el mateix nom.\n"
+"\n"
+"    Opcions:\n"
+"      -p        usa el valor per defecte de la variable PATH que garanteix\n"
+"                trobar totes les utilitats estàndards\n"
+"      -v        mostra una descripció de l'ORDRE similar a la que mostra\n"
+"                l'ordre «type»\n"
+"      -V        mostra una descripció més detallada per a cada ORDRE\n"
+"\n"
+"    Estat de sortida:\n"
+"    Retorna l'estat de sortida de ORDRE, o fracàs si ORDRE no s'ha trobat."
+
+# help declare
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"Assigna valors i atributs a variables.\n"
+"\n"
+"    Declara variables i els hi assigna atributs.  Sense cap NOM, mostra el\n"
+"    valor i atributs de totes les variables.\n"
+"\n"
+"    Opcions:\n"
+"      -f        només té en compte noms i definicions de funcions\n"
+"      -F        només mostra noms de funcions (a part del número de línia i\n"
+"                el nom del fitxer, en mode de depuració)\n"
+"      -g        crea variables globals quan s'utilitza dins d'una funció,\n"
+"                altrament s'ignora\n"
+"      -p        mostra els atributs i el valor de cada NOM\n"
+"\n"
+"    Opcions que estableixen atributs:\n"
+"      -a        per a fer NOMs vectors indexats (si estan suportats)\n"
+"      -A        per a fer NOMs vectors associatius (si estan suportats)\n"
+"      -i        per a assignar l'atribut de nombre enter a NOMs\n"
+"      -l        per a convertir NOMs a minúscules en l'assignació\n"
+"      -n        per a fer NOM una referència a la variable que té per nom\n"
+"                el seu valor\n"
+"      -r        per a fer NOMs variables de només lectura\n"
+"      -t        per a assignar l'atribut «traça» a NOMs\n"
+"      -u        per a convertir NOMs a majúscules en l'assignació\n"
+"      -x        per a exportar NOMs\n"
+"\n"
+"    Si feu servir «+» en lloc de «-», elimina l'atribut.\n"
+"\n"
+"    Les variables que tenen l'atribut de nombre enter s'avaluen\n"
+"    aritmèticament (vegeu l'ordre «let») quan s'assigna un valor a la\n"
+"    variable.\n"
+"\n"
+"    Quan s'usa en una funció, «declare» converteix NOMs en variables "
+"locals,\n"
+"    igual que l'ordre «local».  L'opció «-g» inhabilita aquest "
+"comportament.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit, excepte si rep una opció invàlida o es produeix un error."
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"Assigna valors i atributs a variables.\n"
+"\n"
+"    Sinònim de «declare».  Vegeu «help declare»."
+
+# help local
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Defineix variables locals.\n"
+"\n"
+"    Crea una variable local anomenada NOM i li assigna VALOR.  OPCIÓ pot "
+"ser\n"
+"    qualsevol opció que «declare» admeti.\n"
+"\n"
+"    Les variables locals només es poden utilitzar dins d'una funció; només\n"
+"    són visibles a dins de la funció on són definides i dins de les "
+"funcions\n"
+"    imbricades dins d'aquestes.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit excepte si heu especificat una opció no vàlida, es produeix\n"
+"    un error, o l'intèrpret no està executant una funció."
+
+#: builtins.c:557
+#, fuzzy
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Escriu arguments a la sortida estàndard.\n"
+"\n"
+"    Mostra els ARGs a la sortida estàndard, separats per un únic espai i\n"
+"    seguits d'un salt de línia.\n"
+"\n"
+"    Opcions:\n"
+"       -n       omet el caràcter de salt de línia.\n"
+"       -e       activa la interpretació de seqüències d'escapada\n"
+"       -E       desactiva la interpretació de seqüències d'escapada\n"
+"\n"
+"    «echo» interpreta els següents caràcters escapats amb una barra "
+"inversa:\n"
+"       \\a       alerta (campana)\n"
+"       \\b       retrocés\n"
+"       \\c       suprimeix tota sortida ulterior\n"
+"       \\e       caràcter d'escapada\n"
+"       \\E       caràcter d'escapada\n"
+"       \\f       salt de pàgina\n"
+"       \\n       salt de línia\n"
+"       \\r       retorn de carro\n"
+"       \\t       tabulació horitzontal\n"
+"       \\v       tabulació vertical\n"
+"       \\\\       barra invertida\n"
+"       \\0nnn    caràcter corresponent al codi ASCII número NNN, on NNN és "
+"un\n"
+"                número octal de 0 a 3 dígits.\n"
+"       \\xHH     caràcter de 8 bits corresponent al valor HH, on HH és un\n"
+"                número hexadecimal d'1 o 2 dígits.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit, tret que es produeixi un error d'escriptura."
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Escriu arguments a la sortida estàndard.\n"
+"\n"
+"    Mostra els ARGs a la sortida estàndard seguits d'un salt de línia.\n"
+"\n"
+"    Opcions:\n"
+"       -n       omet el caràcter de salt de línia.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit, tret que es produeixi un error d'escriptura."
+
+# help enable
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"Habilita o inhabilita ordres internes de l'intèrpret.\n"
+"\n"
+"    Habilita o inhabilita ordres internes de l'intèrpret.  Inhabilitar una\n"
+"    ordre interna permet executar una ordre que es troba en el disc i que "
+"té\n"
+"    el mateix nom que l'ordre interna, sense necessitat d'escriure'n la\n"
+"    ubicació completa.\n"
+"\n"
+"    Opcions:\n"
+"      -a        mostra una llista d'ordres internes indicant-ne l'estat\n"
+"      -n        inhabilita NOM o bé mostra una llista de les ordres "
+"internes\n"
+"                que es troben inhabilitades\n"
+"      -p        mostra la llista en format reutilitzable\n"
+"      -s        mostra només les ordres internes «especials» Posix\n"
+"\n"
+"    Opcions per a controlar l'enllaçat dinàmic:\n"
+"      -f        carrega l'ordre interna NOM, de l'objecte compartit FITXER\n"
+"      -d        esborra una ordre interna carregada amb l'opció -f\n"
+"\n"
+"    Sense opcions, habilita cada un dels NOMs.\n"
+"\n"
+"    Per a utilitzar el «test» que es troba al $PATH en lloc de la versió\n"
+"    interna de l'intèrpret, feu «enable -n test».\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit, excepte si NOM no és una ordre interna o té lloc un error."
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Executa els arguments com una ordre.\n"
+"\n"
+"    Combina ARGs en una única cadena, utilitza el resultat com a entrada "
+"per\n"
+"    a l'intèrpret i executa les ordres resultants.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna l'estat de sortida de l'ordre, o èxit si l'ordre és nul·la."
+
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"Interpreta arguments que representen opcions.\n"
+"\n"
+"    getopts és utilitzat per les utilitats de bash per a interpretar els\n"
+"    paràmetres posicionals com a opcions.\n"
+"\n"
+"    CADENA conté les lletres de les opcions a reconèixer; si una lletra va\n"
+"    seguida de dos punts, l'opció requereix un argument, que s'ha de "
+"separar\n"
+"    amb un espai en blanc.\n"
+"\n"
+"    Cada cop que s'invoca, getopts posarà l'opció successiva a la variable\n"
+"    d'entorn $nom, inicialitzant nom si no existeix, i l'índex del següent\n"
+"    argument a la variable OPTIND.  La variable OPTIND s'inicialitza a 1\n"
+"    cada cop que s'invoca l'intèrpret o un script.  Quan una opció "
+"requereix\n"
+"    un argument, getopts col·loca l'argument a la variable OPTARG.\n"
+"\n"
+"    getopts pot informar d'errors de dues maneres.  Si el primer caràcter "
+"de\n"
+"    CADENA és un caràcter de dos punts (:), getopts entra en mode "
+"silenciós.\n"
+"    En aquest mode, no es mostra cap missatge d'error.  Si es detecta una\n"
+"    opció no vàlida, getopts col·loca el caràcter de l'opció a OPTARG.  Si\n"
+"    no es troba un argument requerit, getopts posa un ':' a NOM, i el\n"
+"    caràcter de l'opció trobada a OPTARG.  Si getopts no es troba en mode\n"
+"    silenciós, i es detecta una opció no vàlida, getopts posa un '?' a NOM "
+"i\n"
+"    elimina la variable OPTARG.  Si no troba un argument requerit, posa un\n"
+"    '?' a NOM, elimina OPTARG, i mostra un missatge de diagnòstic.\n"
+"\n"
+"    Si la variable OPTERR té el valor 0, getopts evita mostrar missatges\n"
+"    d'error, encara que el primer caràcter de CADENA no siguin dos punts.\n"
+"    Per defecte, OPTERR té el valor 1.\n"
+"\n"
+"    Normalment, getopts interpreta els paràmetres posicionals ($0 - $9),\n"
+"    però si hi ha més arguments, s'interpreten aquests.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Retorna èxit si es troba alguna opció; falla si s'arriba al final de "
+"les\n"
+"    opcions o si es produeix un error."
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"Substitueix el procés de l'intèrpret per l'ordre especificada.\n"
+"\n"
+"    Executa ORDRE, substituint aquest intèrpret pel programa especificat.\n"
+"    Es passen ARGUMENTS a l'ORDRE com a arguments.  Si no especifiqueu cap\n"
+"    ORDRE, qualsevol redirecció té efectes a l'intèrpret actual.\n"
+"\n"
+"    Opcions:\n"
+"      -a nom    passa NOM a ORDRE com a argument número zero\n"
+"      -c        executa ORDRE en un entorn buit\n"
+"      -t        passa un guionet a ORDRE com a argument número zero\n"
+"\n"
+"    Si l'ordre no es pot executar i la sessió és no-interactiva, "
+"l'intèrpret\n"
+"    surt, excepte si l'opció «execfail» està habilitada.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit, tret que ORDRE no es trobi o es produeixi un error de\n"
+"    redirecció."
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Abandona l'intèrpret.\n"
+"\n"
+"    Surt de l'intèrpret amb estat N.  Si ometeu N, l'estat de sortida és el\n"
+"    de l'última ordre executada."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Abandona una sessió d'entrada.\n"
+"\n"
+"    Abandona una sessió d'entrada amb estat de sortida N.  Torna un error "
+"si\n"
+"    no s'està executant en una sessió d'entrada."
+
+# help fc (hi ha un bug a la cadena original)
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"Mostra o executa ordres de l'historial.\n"
+"\n"
+"    fc s'utilitza per a mostrar o editar i re-executar ordres de\n"
+"    l'historial.  PRIMER i ÚLTIM poden ser números que defineixen un\n"
+"    interval, o PRIMER pot ser una cadena, que significa l'ordre més recent\n"
+"    que comença amb aquesta cadena.\n"
+"\n"
+"    Opcions:\n"
+"      -e EDITOR selecciona quin editor utilitzar.  Per defecte és el valor\n"
+"                de la variable FCEDIT, després el valor de EDITOR, i\n"
+"                finalment vi\n"
+"      -l\tmostra les línies en lloc d'editar-les\n"
+"      -n\tomet els números de línia a l'hora de mostrar la llista\n"
+"      -r\tinverteix l'ordre de les línies (més recents primer)\n"
+"\n"
+"    Amb el format «fc -s [pat=sub ...] [ordre]», ORDRE es re-executa "
+"després\n"
+"    d'haver fet la substitució PAT=SUB.\n"
+"\n"
+"    Un àlies útil és r='fc -s', de manera que «r cc» executa l'última ordre\n"
+"    que comença per «cc» i «r» re-executa l'última ordre.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit o l'estat de l'última ordre executada; diferent de zero si "
+"es\n"
+"    produeix un error."
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Porta una feina al primer pla.\n"
+"\n"
+"    Mou la feina identificada per FEINA al primer pla, convertint-la en la\n"
+"    feina corrent.  Si ometeu FEINA, s'utilitza la feina que l'intèrpret\n"
+"    considera com a corrent.\n"
+"\n"
+"    Estat de sortida:\n"
+"    L'estat de l'ordre que es mou al primer pla, o fallada si es produeix "
+"un\n"
+"    error."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Mou feines al segon pla.\n"
+"\n"
+"    Mou la feina identificada per FEINA al segon pla, com si s'hagués\n"
+"    iniciat amb un «&».  Si ometeu FEINA, s'utilitza la feina que\n"
+"    l'intèrpret considera com a feina corrent.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit, excepte si el control de feines no està habilitat o es\n"
+"    produeix un error."
+
+# help hash
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"Recorda o mostra la ubicació de programes.\n"
+"\n"
+"    Determina i recorda la ubicació completa de cada NOM d'ordre.  Sense\n"
+"    arguments, mostra informació sobre les ordres que s'han recordat.\n"
+"\n"
+"    Opcions:\n"
+"      -d                oblida la ubicació recordada per a cada NOM\n"
+"      -l                utilitza un format que es pot reciclar com a "
+"entrada\n"
+"      -p ubicació       utilitza UBICACIÓ com a ubicació completa per a NOM\n"
+"      -r                oblida totes les ubicacions recordades\n"
+"      -t                mostra la ubicació recordada per a cada NOM,\n"
+"                        precedint cada ubicació amb el corresponent NOM, si\n"
+"                        hi ha múltiples NOMs.\n"
+"    Arguments:\n"
+"      NOM               Es busca NOM en el $PATH i s'afegeix a la llista\n"
+"                        d'ordres recordades.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit, excepte si NOM no es troba o passeu una opció invàlida."
+
+# help help
+#: builtins.c:818
+#, fuzzy
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Mostra informació sobre ordres internes.\n"
+"\n"
+"    Mostra ajuda sobre les ordres internes.  Amb PATRÓ, dóna informació\n"
+"    detallada sobre aquelles ordres que coincideixen amb PATRÓ, altrament\n"
+"    mostra una llista amb temes d'ajuda.\n"
+"\n"
+"    Opcions:\n"
+"      -d        mostra una descripció curta de cada tema\n"
+"      -m        mostra la forma d'ús en format de pseudo-pàgina de manual\n"
+"      -s        mostra una sinopsi de cada tema corresponent a PATRÓ\n"
+"\n"
+"    Arguments:\n"
+"      PATRÓ     Patró que especifica un tema d'ajuda\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit, excepte si PATRÓ no es troba o passeu una opció invàlida."
+
+#: builtins.c:842
+#, fuzzy
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Mostra o manipula l'historial.\n"
+"\n"
+"    Mostra l'historial amb números de línia, indicant les entrades\n"
+"    modificades amb «*».  Amb l'argument N, només mostra les N últimes\n"
+"    entrades.\n"
+"\n"
+"    Opcions:\n"
+"      -c        esborra la llista d'entrades\n"
+"      -d offset esborra l'entrada de l'historial a la posició OFFSET\n"
+"      -a        afegeix la sessió actual al fitxer de l'historial\n"
+"      -n        llegeix el fitxer de l'historial i afegeix les línies\n"
+"                prèviament no llegides a la llista\n"
+"      -r        llegeix el fitxer de l'historial i n'afegeix el contingut\n"
+"                sencer a la llista\n"
+"      -w        escriu l'historial actual al fitxer de l'historial\n"
+"      -p        expandeix cada ARG i mostra el resultat, sense desar-lo\n"
+"                a la llista\n"
+"      -s        afegeix ARGs a la llista com una única entrada\n"
+"\n"
+"    Si passeu un nom de FITXER, s'utilitza com a fitxer d'historial.  En "
+"cas\n"
+"    contrari, si $HISTFILE té algun valor, s'utilitza aquest, si no\n"
+"    s'utilitza ~/.bash_history.\n"
+"\n"
+"    Si la variable $HISTTIMEFORMAT està definida i no és nul·la, el seu\n"
+"    valor s'utilitza com a cadena de format strftime(3) per a mostrar "
+"l'hora\n"
+"    associada a cada entrada de l'historial.  En cas contrari no es mostra\n"
+"    informació horària.\n"
+"\n"
+"    Estat de sortida: \n"
+"    Torna èxit, excepte si passeu una opció invàlida o es produeix un error."
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"Mostra l'estat de feines.\n"
+"\n"
+"    Mostra les feines actives.  Si especifiqueu FEINA, es restringeix la\n"
+"    sortida a la feina especificada.  Sense opcions, mostra l'estat de "
+"totes\n"
+"    les feines actives.\n"
+"\n"
+"    Opcions:\n"
+"      -l        mostra els IDs de procés a més de la informació normal\n"
+"      -n        mostra només les feines l'estat de les quals ha\n"
+"                canviat des de l'última notificació\n"
+"      -p        mostra només els IDs de procés\n"
+"      -r        restringeix la sortida a les feines en execució\n"
+"      -s        restringeix la sortida a les feines aturades\n"
+"\n"
+"    Amb l'opció -x, s'executa ORDRE, després de substituir totes les\n"
+"    especificacions de feina per l'ID del procés del líder del grup de\n"
+"    processos d'aquella feina, a ARGS.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit, excepte si passeu una opció invàlida o es produeix un "
+"error.\n"
+"    Si utilitzeu -x, torna l'estat de sortida d'ORDRE."
+
+# help disown
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"Deslliga feines vinculades a l'intèrpret actual.\n"
+"\n"
+"    Suprimeix FEINA de la taula de feines actives.  Si no especifiqueu\n"
+"    FEINA, s'interpreta que us referiu a la feina corrent.\n"
+"\n"
+"    Opcions:\n"
+"      -a        suprimeix totes les feines si no especifiqueu FEINA\n"
+"      -h\tmarca FEINA per a no enviar-li un senyal SIGHUP si\n"
+"                l'intèrpret rep un SIGHUP\n"
+"      -r        suprimeix totes les feines en execució\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit, excepte si passeu una opció o FEINA invàlida."
+
+# help kill
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Envia un senyal a una feina.\n"
+"\n"
+"    Envia el senyal SENYAL o NÚMSENYAL al procés corresponent a PID o "
+"FEINA.\n"
+"    Si no especifiqueu cap senyal, s'envia un SIGTERM.\n"
+"\n"
+"    Opcions:\n"
+"      -s senyal         SENYAL és el nom d'un senyal\n"
+"      -n númsenyal\tNÚMSENYAL és el número d'un senyal\n"
+"      -l                mostra els noms dels senyals; si hi ha arguments \n"
+"                        després de «-l» s'interpreten com a números de\n"
+"                        senyals, els noms dels quals s'han de mostrar\n"
+"      -L                sinònim de -l\n"
+"\n"
+"    kill és una ordre interna per dues raons: perquè això permet usar IDs "
+"de\n"
+"    feina en lloc de IDs de procés, i perquè permet matar processos encara\n"
+"    que arribeu al límit de processos que se us permet crear.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit, excepte si passeu una opció invàlida o es produeix un error."
+
+# help let
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"Avalua expressions aritmètiques.\n"
+"\n"
+"    Avalua cada ARG com a expressió aritmètica.  Les operacions es fan amb\n"
+"    enters d'amplada fixa sense comprovacions de desbordament, tot i que "
+"les\n"
+"    divisions per 0 es detecten i es marquen com a error.  La següent "
+"llista\n"
+"    mostra els operadors, agrupats en nivells d'igual precedència.  Els\n"
+"    nivells apareixen en ordre descendent de precedència.\n"
+"\n"
+"    \tid++, id--\tpostincrement, postdecrement\n"
+"    \t++id, --id\tpreincrement, predecrement\n"
+"    \t-, +\t\tnegatiu, positiu unaris\n"
+"    \t!, ~\t\tnegació lògica i a nivell de bits\n"
+"    \t**\t\texponenciació\n"
+"    \t*, /, %\t\tmultiplicació, divisió, residu\n"
+"    \t+, -\t\taddició, subtracció\n"
+"    \t<<, >>\t\tdesplaçament de bits a l'esquerra i a la dreta\n"
+"    \t<=, >=, <, >\tcomparació\n"
+"    \t==, !=\t\tigualtat, desigualtat\n"
+"    \t&\t\tAND a nivell de bits\n"
+"    \t^\t\tXOR a nivell de bits\n"
+"    \t|\t\tOR a nivell de bits\n"
+"    \t&&\t\tAND lògic\n"
+"    \t||\t\tOR lògic\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\toperador condicional\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignació\n"
+"\n"
+"    S'admeten variables de l'intèrpret com a operands.  El nom de la\n"
+"    variable se substitueix pel seu valor (convertit en enter d'amplada\n"
+"    fixa).  No cal que la variable tingui l'atribut d'enter perquè pugui\n"
+"    aparèixer en una expressió aritmètica.\n"
+"\n"
+"    Els operadors s'avaluen en ordre de precedència.  Les subexpressions\n"
+"    entre parèntesis s'avaluen primer, independentment de les regles de\n"
+"    precedència anteriors.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Si l'avaluació de l'últim ARG és 0, let torna 1; altrament torna 0."
+
+#: builtins.c:994
+#, fuzzy
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"Llegeix una línia a l'entrada estàndard i la divideix en camps.\n"
+"\n"
+"    Llegeix una sola línia a l'entrada estàndard, o al descriptor de fitxer\n"
+"    FD si especifiqueu l'opció -u.  La línia es divideix en camps, segons\n"
+"    les mateixes regles que en la separació de paraules, i la primera\n"
+"    paraula s'assigna al primer NOM, la segona al segon NOM, etc., mentre\n"
+"    que les paraules sobrants, si n'hi ha, s'assignen a l'últim NOM.  Només\n"
+"    es reconeixen com a delimitadors de paraula els caràcters que conté la\n"
+"    variable $IFS.\n"
+"\n"
+"    Si no especifiqueu cap NOM, en aquest cas la línia llegida es desa a la\n"
+"    variable REPLY.\n"
+"\n"
+"    Opcions:\n"
+"      -a vector\tassigna les paraules llegides a VECTOR, de forma "
+"seqüencial\n"
+"                començant des de l'índex número 0.\n"
+"      -d delim\tcontinue llegint fins a trobar el caràcter DELIM, en lloc "
+"de\n"
+"                fins a trobar un salt de línia\n"
+"      -e\tsi la sessió és interactiva, utilitza Readline per a obtenir\n"
+"                la línia\n"
+"      -i text\tUtilitza TEXT com a text inicial per a Readline\n"
+"      -n núm\ttorna després de llegir exactament NÚM caràcters, o quan es\n"
+"                trobi el delimitador si apareix abans de NÚM caràcters\n"
+"      -N núm    torna només després de llegir exactament NÚM caràcters,\n"
+"                excepte si es troba EOF o s'esgota el temps d'espera,\n"
+"                i ignora qualsevol delimitador\n"
+"      -p introd mostra la cadena INTROD sense cap caràcter de salt de línia\n"
+"                afegit, abans d'intentar llegir res\n"
+"      -r        prohibeix escapar caràcters amb una barra invertida\n"
+"      -s        suprimeix l'eco quan l'entrada està connectada a un "
+"terminal\n"
+"      -t temps  surt si transcorre TEMPS (en segons) abans d'haver\n"
+"                aconseguit llegir una línia sencera.  Per defecte, el límit\n"
+"                de temps és el valor de la variable TMOUT.  TEMPS pot ser "
+"un\n"
+"                número amb decimals.  Si TEMPS és 0, read torna\n"
+"                immediatament, sense intentar llegir cap dada, i torna èxit\n"
+"                només si hi ha dades disponibles en el descriptor de fitxer\n"
+"                FD especificat.  Un estat de sortida més gran que 128 "
+"indica\n"
+"                que s'ha esgotat el temps d'espera.\n"
+"      -u fd     llegeix dades al descriptor de fitxer FD, en lloc de a\n"
+"                l'entrada estàndard.\n"
+"\n"
+"    Estat de sortida:\n"
+"    El codi de retorn és zero, excepte si es troba EOF (final de fitxer),\n"
+"    s'arriba al límit de temps (en aquest cas, és major que 128), es\n"
+"    produeix un error d'assignació de variable, o si heu especificat un\n"
+"    descriptor de fitxer invàlid amb l'opció -u."
+
+# help return
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"Torna des d'una funció de l'intèrpret.\n"
+"\n"
+"    Provoca que una funció o script executat amb «source» torni amb el "
+"valor\n"
+"    de retorn especificat per N.  Si s'omet N, l'estat de retorn és aquell\n"
+"    de l'última ordre executada dins la funció o script.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna N, o fallada si l'intèrpret no està executant cap funció o script."
+
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"Estableix opcions de l'intèrpret i paràmetres posicionals.\n"
+"\n"
+"    Modifica el valor d'atributs de l'intèrpret i de paràmetres "
+"posicionals,\n"
+"    o mostra els noms i valors de les variables de l'intèrpret.\n"
+"\n"
+"    Opcions:\n"
+"      -a  Exporta les variables que es creïn o es modifiquin.\n"
+"      -b  Notifica immediatament la finalització de feines.\n"
+"      -e  Surt immediatament si una ordre acaba amb estat diferent de zero.\n"
+"      -f  Deshabilita la generació de noms de fitxers («globbing»).\n"
+"      -h  Recorda la ubicació de les ordres que s'executen.\n"
+"      -k  Afegeix tots els arguments en forma d'assignació a l'entorn de\n"
+"          l'ordre, no només aquells que precedeixen el nom de l'ordre.\n"
+"      -m  Activa la gestió de feines.\n"
+"      -n  Llegeix ordres, però sense executar-les.\n"
+"      -o opció\n"
+"          Estableix la variable corresponent a OPCIÓ:\n"
+"              allexport    igual que -a\n"
+"              braceexpand  igual que -B\n"
+"              emacs        utilitza una interfície d'edició estil emacs\n"
+"              errexit      igual que -e\n"
+"              errtrace     igual que -E\n"
+"              functrace    igual que -T\n"
+"              hashall      igual que -h\n"
+"              histexpand   igual que -H\n"
+"              history      activa l'historial\n"
+"              ignoreeof    l'intèrpret no surt en cas de trobar EOF\n"
+"              interactive-comments\n"
+"                           permet comentaris en ordres interactives\n"
+"              keyword      igual que -k\n"
+"              monitor      igual que -m\n"
+"              noclobber    igual que -C\n"
+"              noexec       igual que -n\n"
+"              noglob       igual que -f\n"
+"              nolog        actualment aquesta opció no té cap efecte\n"
+"              notify       igual que -b\n"
+"              nounset      igual que -u\n"
+"              onecmd       igual que -t\n"
+"              physical     igual que -P\n"
+"              pipefail     el valor retornat per una canonada és l'estat de\n"
+"                           l'última ordre que ha acabat amb estat no-zero,\n"
+"                           o zero si cap ordre ha acabat amb estat diferent\n"
+"                           de zero\n"
+"              posix        ajusta el comportament de bash a l'estàndard "
+"Posix\n"
+"              privileged   igual que -p\n"
+"              verbose      igual que -v\n"
+"              vi           usa una interfície d'edició estil vi\n"
+"              xtrace       igual que -x\n"
+"      -p  S'activa automàticament sempre que els ids efectiu i real de\n"
+"          l'usuari no coincideixin.  No processa el fitxer $ENV ni importa\n"
+"          funcions.  Si desactiveu aquesta opció, els valors de l'uid i gid\n"
+"          reals s'assignen a l'uid i gid efectius.\n"
+"      -t  Surt després de llegir i executar una única ordre.\n"
+"      -u  Tracta les variables no definides com a error, en substitucions.\n"
+"      -v  Escriu les línies de l'entrada a la sortida.\n"
+"      -x  Escriu ordres i arguments a la sortida a mesura que s'executen.\n"
+"      -B  Activa l'expansió de claudàtors ([])\n"
+"      -C  Prohibeix la sobrescriptura de fitxers ordinaris mitjançant\n"
+"          redireccions.\n"
+"      -E  Intercepta senyals ERR també durant l'execució de funcions.\n"
+"      -H  Activa la substitució d'elements de l'historial.  Aquesta opció\n"
+"          està activa per defecte si la sessió és interactiva.\n"
+"      -P  Omet la resolució d'enllaços simbòlics a l'hora d'executar ordres\n"
+"          que canvien el directori corrent, tals com cd.\n"
+"      -T  Intercepta senyals DEBUG i RETURN també durant l'execució de\n"
+"          funcions.\n"
+"\n"
+"      --  Assigna els arguments restants a paràmetres posicionals.  Si no\n"
+"          queda cap argument, suprimeix els paràmetres posicionals.\n"
+"          \n"
+"      -   Assigna els arguments restants a paràmetres posicionals.\n"
+"          Desactiva les opcions -x i -v.\n"
+"\n"
+"    Un signe + en lloc de - desactiva l'opció corresponent.  Els arguments\n"
+"    que controlen les opcions es poden utilitzar a l'hora d'invocar\n"
+"    l'intèrpret.  El conjunt d'opcions actives en aquest intèrpret es pot\n"
+"    trobar a $-.  La resta d'arguments són paràmetres posicionals i\n"
+"    s'assignen per ordre a $1, $2, ... $n.  Si no especifiqueu cap ARG, es\n"
+"    mostren totes les variables definides.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit, excepte si especifiqueu una opció no vàlida."
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"Suprimeix el valor i atributs de variables i funcions.\n"
+"\n"
+"    Per a cada NOM, suprimeix la corresponent variable o funció.\n"
+"\n"
+"    Opcions:\n"
+"      -f        interpreta NOM com a funció\n"
+"      -v        interpreta NOM com a variable\n"
+"      -n        interpreta NOM com a referència a una altra variable, i\n"
+"                suprimeix aquesta variable, en lloc de la variable a què\n"
+"                es refereix\n"
+"\n"
+"    Sense opcions, primer intenta suprimir una variable, i si això falla\n"
+"    intenta suprimir una funció.\n"
+"\n"
+"    Algunes variables no poden ser suprimides; per ex., vegeu «readonly».\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit, excepte si especifiqueu una opció no vàlida o NOM és una\n"
+"    variable o funció de només lectura."
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Exporta variables de l'intèrpret.\n"
+"\n"
+"    Exporta automàticament cada NOM a l'entorn de les ordres subsegüents.\n"
+"    Si especifiqueu VALOR, s'assigna VALOR a la variable abans\n"
+"    d'exportar-la.\n"
+"\n"
+"    Opcions:\n"
+"      -f        tracta NOM com a funció\n"
+"      -n        suprimeix la propietat d'exportació per a NOM\n"
+"      -p        mostra una llista amb totes les variables i funcions\n"
+"                exportades\n"
+"      \n"
+"    L'argument «--» atura el processament de més opcions.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit, excepte si especifiqueu una opció no vàlida o NOM no és\n"
+"    vàlid."
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Marca variables com a no modificables.\n"
+"\n"
+"    Marca cada NOM com a variable o funció de només lectura; els valors\n"
+"    d'aquests NOMs es poden modificar en assignacions subseqüents.  Si\n"
+"    especifiqueu VALOR, s'assigna VALOR a la variable o funció abans de\n"
+"    marcar-la com a només lectura.\n"
+"\n"
+"    Opcions:\n"
+"      -a        limita la sortida a vectors indexats\n"
+"      -A        limita la sortida a vectors associatius\n"
+"      -f        limita la sortida a funcions\n"
+"      -p        mostra una llista amb totes les variables o funcions,\n"
+"                depenent de si heu especificat l'opció -f, de només lectura\n"
+"\n"
+"    L'argument «--» atura el processament de més opcions.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit, excepte si especifiqueu una opció no vàlida o NOM no és\n"
+"    vàlid."
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"Desplaça els paràmetres posicionals.\n"
+"\n"
+"    Reanomena els paràmetres posicionals $N+1, $N+2 ... com a $1, $2 ...  "
+"Si\n"
+"    ometeu N, s'assumeix que és 1.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit, excepte si N és negatiu o més gran que $#."
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Executa les ordres d'un fitxer a l'intèrpret actual.\n"
+"\n"
+"    Llegeix les ordres que hi ha a FITXER i les executa a l'intèrpret\n"
+"    actual.  Les entrades a $PATH s'utilitzen per a localitzar el directori\n"
+"    que conté FITXER.  Si especifiqueu qualsevol ARG, aquests arguments es\n"
+"    converteixen en paràmetres posicionals quan s'executa FITXER.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna l'estat de l'última ordre a FITXER executada; falla si FITXER no\n"
+"    es pot llegir."
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Suspèn l'execució de l'intèrpret.\n"
+"\n"
+"    Suspèn l'execució d'aquest intèrpret fins a rebre un senyal SIGCONT.  "
+"Si\n"
+"    no es força, les sessions d'entrada no es poden suspendre.\n"
+"\n"
+"    Opcions:\n"
+"      -f      força la suspensió, encara que sigui una sessió d'entrada\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit, excepte si no hi ha control de feines o es produeix un error."
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"Avalua una expressió condicional.\n"
+"\n"
+"    Surt amb estat 0 (cert) o 1 (fals) en funció de l'avaluació d'EXPR.  "
+"Les\n"
+"    expressions poden ser unàries o binàries.  Les expressions unàries\n"
+"    s'utilitzen sovint per a determinar l'estat de fitxers.  També podeu\n"
+"    utilitzar operadors de cadenes, i operadors de comparació numèrica.\n"
+"\n"
+"    El comportament de test depèn del nombre d'arguments.  Podeu trobar\n"
+"    l'especificació completa a la plana del manual de bash.\n"
+"\n"
+"    Operadors de fitxer:\n"
+"\n"
+"      -a FITXER      Cert si el fitxer existeix.\n"
+"      -b FITXER      Cert si el fitxer és un fitxer especial de blocs.\n"
+"      -c FITXER      Cert si el fitxer és un fitxer especial de caràcters.\n"
+"      -d FITXER      Cert si el fitxer és un directori.\n"
+"      -e FITXER      Cert si el fitxer existeix.\n"
+"      -f FITXER      Cert si el fitxer existeix i és ordinari.\n"
+"      -g FITXER      Cert si el bit «set-group-id» està activat.\n"
+"      -h FITXER      Cert si el fitxer és un enllaç simbòlic.\n"
+"      -L FITXER      Cert si el fitxer és un enllaç simbòlic.\n"
+"      -k FITXER      Cert si el bit «sticky» està activat.\n"
+"      -p FITXER      Cert si el fitxer és una canonada.\n"
+"      -r FITXER      Cert si teniu permís per a llegir el fitxer.\n"
+"      -s FITXER      Cert si el fitxer existeix i no està buit.\n"
+"      -S FITXER      Cert si el fitxer és un «socket».\n"
+"      -t FD          Cert si FD està obert i es refereix a un terminal.\n"
+"      -u FITXER      Cert si el bit «set-user-id» està activat.\n"
+"      -w FITXER      Cert si teniu permís per a escriure al fitxer.\n"
+"      -x FITXER      Cert si teniu permís per a executar el fitxer.\n"
+"      -O FITXER      Cert si el vostre usuari és propietari del fitxer.\n"
+"      -G FITXER      Cert si el vostre grup és propietari del fitxer.\n"
+"      -N FITXER      Cert si el fitxer ha canviat des de l'última lectura.\n"
+"\n"
+"      FITXER1 -nt FITXER2  Cert si fitxer1 és més nou que fitxer2 (segons "
+"la\n"
+"                           data de modificació).\n"
+"\n"
+"      FITXER1 -ot FITXER2  Cert si fitxer1 és més antic que fitxer2.\n"
+"\n"
+"      FITXER1 -ef FITXER2  Cert si fitxer1 és un enllaç dur a fitxer2.\n"
+"\n"
+"    Operadors de cadena:\n"
+"\n"
+"      -z CADENA      Cert si la cadena és buida.\n"
+"\n"
+"      -n CADENA      Cert si la cadena no és buida.\n"
+"\n"
+"      CADENA1 = CADENA2\n"
+"                     Cert si les cadenes són iguals.\n"
+"      CADENA1 != CADENA2\n"
+"                     Cert si les cadenes no són iguals.\n"
+"      CADENA1 < CADENA2\n"
+"                     Cert si CADENA1 va primer alfabèticament.\n"
+"      CADENA1 > CADENA2\n"
+"                     Cert si CADENA2 va primer alfabèticament.\n"
+"\n"
+"    Altres operadors:\n"
+"\n"
+"      -o OPCIÓ       Cert si l'opció de l'intèrpret està activada.\n"
+"      -v VAR         Cert si la variable VAR està definida.\n"
+"      -R VAR         Cert si la variable VAR està definida i és una \n"
+"                     referència a una altra variable.\n"
+"      ! EXPR         Cert si expr és fals.\n"
+"      EXPR1 -a EXPR2 Cert si tant expr1 com expr2 són cert.\n"
+"      EXPR1 -o EXPR2 Cert si qualsevol de expr1 o expr2 són certes.\n"
+"\n"
+"      arg1 OP arg2   Tests aritmètics.  OP és un de -eq, -ne, -lt, -le, -"
+"gt,\n"
+"                     o -ge.\n"
+"\n"
+"      Els operadors aritmètics binaris tornen cert si ARG1 és igual, no\n"
+"      igual, més petit que, més petit que o igual, més gran que, o més gran\n"
+"      que o igual que ARG2, respectivament.\n"
+"\n"
+"      Estat de sortida:\n"
+"      Torna èxit si EXPR s'avalua com a cert; falla si EXPR s'avalua com a\n"
+"      fals o si especifiqueu un argument no vàlid."
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Avalua una expressió condicional.\n"
+"\n"
+"    Aquesta ordre interna és un sinònim de \"test\", amb la diferència que\n"
+"    l'últim argument ha de ser un signe «]» que tanqui el «[» inicial."
+
+# help times
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Mostra els temps d'execució.\n"
+"\n"
+"    Mostra el temps d'execució d'usuari i sistema acumulat per l'intèrpret "
+"i\n"
+"    per tots els seus processos inferiors.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Sempre reïx."
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"Intercepta senyals i altres esdeveniments.\n"
+"\n"
+"    Defineix i activa controladors de senyal, que són executats quan\n"
+"    l'intèrpret rep senyals o en altres circumstàncies.\n"
+"\n"
+"    ARG és una ordre que es llegeix i s'executa quan l'intèrpret rep "
+"SENYAL.\n"
+"    Si ometeu ARG (i especifiqueu un únic SENYAL) o ARG és «-», cada senyal\n"
+"    és restablert al seu valor original.  Si ARG és una cadena nul·la,\n"
+"    aleshores SENYAL és ignorat per l'intèrpret i per tots els programes\n"
+"    invocats per l'intèrpret.\n"
+"\n"
+"    Si SENYAL és EXIT (0), ARG s'executa quan l'intèrpret surt.  Si SENYAL\n"
+"    és DEBUG, ARG s'executa abans de cada ordre.  Si SENYAL és RETURN, ARG\n"
+"    s'executa cada cop que una funció o script executat amb l'ordre «.» o\n"
+"    «source» finalitza l'execució.  Si SENYAL és ERR, ARG s'executa en els\n"
+"    mateixos casos en què una ordre faria sortir l'intèrpret si l'opció -e\n"
+"    estigués activada.\n"
+"\n"
+"    Si no especifiqueu cap argument, trap mostra una llista d'ordres\n"
+"    associades a cada senyal.\n"
+"\n"
+"    Opcions:\n"
+"      -l       mostra una llista amb els noms dels senyals i els números\n"
+"               corresponents\n"
+"      -p       mostra els controladors de senyal associats a cada SENYAL\n"
+"\n"
+"    Cada SENYAL és o bé un nom de senyal definit al fitxer <signal.h> o bé\n"
+"    un número de senyal.  Els noms de senyal no són sensibles a les\n"
+"    majúscules i el prefix SIG és opcional.  Podeu enviar un senyal a\n"
+"    l'intèrpret amb l'ordre «kill -senyal $$».\n"
+"\n"
+"    Estat de sortida: \n"
+"    Torna èxit, excepte si algun SENYAL no és vàlid o especifiqueu una\n"
+"    ordre no vàlida."
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"Mostra informació sobre el tipus d'ordre.\n"
+"\n"
+"    Indica com seria interpretat NOM si s'utilitzés com a ordre.\n"
+"\n"
+"    Opcions:\n"
+"      -a      mostra totes les ubicacions que contenen un executable\n"
+"              anomenat NOM, incloent àlies, ordres internes i funcions si i\n"
+"              només si no s'usa conjuntament amb l'opció «-p»\n"
+"      -f      omet la cerca de funcions\n"
+"      -P      força una cerca al PATH per a cada NOM, encara que sigui un\n"
+"              àlies, ordre interna o funció, i torna el nom del fitxer que\n"
+"              s'executaria\n"
+"      -p      torna o bé el nom del fitxer que s'executaria, o bé res, si\n"
+"              «type -t NOM» no indica «fitxer».\n"
+"      -t      torna només una paraula, que és «àlies», «paraula clau»,\n"
+"              «funció», «ordre interna», «fitxer», o bé «», depenent de si\n"
+"              NOM és un àlies, una paraula reservada de l'intèrpret, una\n"
+"              funció, una ordre interna, un fitxer, o no es pot trobar,\n"
+"              respectivament.\n"
+"\n"
+"    Arguments:\n"
+"      NOM     El nom de l'ordre a interpretar.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit si es troben tots els NOMs; falla si n'hi ha algun que no es\n"
+"    pot trobar."
+
+#: builtins.c:1431
+#, fuzzy
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Canvia els límits d'utilització de recursos per part de l'intèrpret.\n"
+"\n"
+"    Permet controlar la quantitat de recursos disponibles per a l'intèrpret\n"
+"    d'ordres i per als processos que aquest crea, en els sistemes que\n"
+"    admeten tal control.\n"
+"\n"
+"    Opcions:\n"
+"      -S        estableix una limitació «tova»\n"
+"      -H        estableix una limitació «dura»\n"
+"      -a\tmostra tots els límits establerts\n"
+"      -b\tmida màxima de la memòria intermèdia per a «sockets»\n"
+"      -c\tmida màxima dels fitxers de bolcat de memòria\n"
+"      -d\tmida màxima del segment de dades d'un procés\n"
+"      -e\tprioritat màxima d'un procés («nice»)\n"
+"      -f\tmida màxima dels fitxers escrits per l'intèrpret i fills\n"
+"      -i\tnombre màxim de senyals pendents\n"
+"      -k        nombre màxim de cues («kqueue») obertes per a aquest procés\n"
+"      -l\tquantitat màxima de memòria que un procés pot blocar\n"
+"      -m\tmida màxima del conjunt resident (RSS)\n"
+"      -n\tnombre màxim de descriptors de fitxers oberts\n"
+"      -p\tmida màxima de la memòria intermèdia per a canonades\n"
+"      -q\tnombre màxim d'octets a les cues de missatges POSIX\n"
+"      -r\tprioritat màxima de temps-real\n"
+"      -s\tmida màxima de la pila\n"
+"      -t\tquantitat màxima de temps de CPU en segons\n"
+"      -u\tnombre màxim de processos d'usuari\n"
+"      -v\tmida de la memòria virtual\n"
+"      -x\tnombre màxim de fitxers de bloqueig\n"
+"      -P        nombre màxim de pseudoterminals\n"
+"      -T        nombre màxim de fils d'execució\n"
+"\n"
+"    Algunes opcions poden no estar disponibles en algunes plataformes.\n"
+"\n"
+"    Si especifiqueu un L�MIT, aquest s'utilitza com a nou valor per al\n"
+"    recurs indicat; els valors especials de L�MIT són «soft», «hard» i\n"
+"    «unlimited», que signifiquen límit tou actual, límit dur actual, i "
+"sense\n"
+"    límit, respectivament.  En cas contrari, es mostra el valor actual per\n"
+"    al recurs especificat.  Si no especifiqueu cap opció, se suposa -f.\n"
+"\n"
+"    Els valors s'indiquen en increments de 1024 octets, excepte en el cas "
+"de\n"
+"    l'opció -t, que és en segons, -p, que és en increments de 512 octets, i\n"
+"    -u, que és en nombre de processos.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit, tret que especifiqueu una opció invàlida o es produeixi un\n"
+"    error."
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"Mostra o estableix la màscara de mode per a fitxers.\n"
+"\n"
+"    Estableix la màscara de creació de fitxers en MODE.  Si MODE s'omet,\n"
+"    mostra el valor actual de la màscara.\n"
+"\n"
+"    Si MODE comença amb un dígit, s'interpreta com a número octal; en cas\n"
+"    contrari és una cadena de mode simbòlica com les que accepta chmod(1).\n"
+"\n"
+"    Opcions:\n"
+"      -p        sense MODE, mostra la sortida en un format que es pot\n"
+"                reciclar com a entrada\n"
+"      -S\tmostra la màscara en forma simbòlica; altrament produeix un\n"
+"                número octal\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit, excepte si MODE no és vàlid o passeu una opció no vàlida."
+
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"Espera la finalització de feines i en retorna l'estat de sortida.\n"
+"\n"
+"    Espera que cada procés identificat per un ID, que pot ser l'ID del\n"
+"    procés o una especificació de feina, acabi d'executar-se, i en torna\n"
+"    l'estat de sortida.  Si ometeu ID, espera que acabin d'executar-se tots\n"
+"    els processos inferiors, i surt amb estat zero.  Si ID és una\n"
+"    especificació de feina, espera cada un dels processos a la canonada\n"
+"    d'aquella feina.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna l'estat de sortida de l'últim ID; falla si ID no és vàlid o "
+"passeu\n"
+"    una opció no vàlida."
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"Espera la finalització de processos i en retorna l'estat de sortida.\n"
+"\n"
+"    Espera que cada procés, identificat per PID, acabi d'executar-se, i en\n"
+"    mostra l'estat de sortida.  Si no especifiqueu PID, espera que acabin\n"
+"    d'executar-se tots els processos inferiors, i surt amb estat zero.  PID\n"
+"    ha de ser un ID de procés.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna l'estat de sortida de l'últim PID; falla si PID no és vàlid o es\n"
+"    passa una opció no vàlida."
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Executa ordres per a cada element d'una llista.\n"
+"\n"
+"    Els bucles «for» executen una seqüència d'ordres per a cada un dels\n"
+"    elements d'una llista.  Si «in PARAULES ...;» s'omet, aleshores se\n"
+"    suposa «in \"$@\"».  Per a cada element de la llista PARAULES, "
+"l'element\n"
+"    s'assigna a NOM, i les ORDRES s'executen.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna l'estat de sortida de l'última ordre executada."
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Bucle «for» aritmètic.\n"
+"\n"
+"    Equivalent a\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tORDRES\n"
+"    \t\t(( EXP 3 ))\n"
+"    \tdone\n"
+"\n"
+"    EXP1, EXP2 i EXP3 són expressions aritmètiques.  Si s'omet qualsevol de\n"
+"    les expressions, es comporta com si el resultat de l'avaluació de\n"
+"    l'expressió omesa fos 1.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna l'estat de sortida de l'última ordre executada."
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Selecciona paraules d'una llista i executa ordres.\n"
+"\n"
+"    Les PARAULES s'expandeixen i generen una llista de paraules.  Les\n"
+"    paraules expandides s'envien a la sortida d'errors estàndard, cada una\n"
+"    precedida per un número.  Si «in PARAULES» s'omet, se suposa «in \"$@"
+"\"».\n"
+"    Llavors, es mostra l'introductor PS3 i es llegeix una línia a l'entrada\n"
+"    estàndard.  Si la línia correspon amb el número d'alguna de les "
+"paraules\n"
+"    mostrades, aleshores aquesta paraula s'assigna a NOM.  Si la línia està\n"
+"    buida, les PARAULES i l'introductor es tornen a mostrar.  Si es llegeix\n"
+"    EOF, l'ordre finalitza.  Qualsevol altre valor llegit, fa que s'assigni\n"
+"    el valor nul a NOM.  La línia llegida s'assigna a la variable REPLY.\n"
+"    Les ORDRES s'executen després de cada selecció fins a trobar una ordre\n"
+"    «break».\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna l'estat de sortida de l'última ordre executada."
+
+# help time
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"Informa del temps transcorregut durant l'execució d'una canonada.\n"
+"\n"
+"    Executa CANONADA i mostra un resum del temps real, el temps de CPU\n"
+"    d'usuari i el temps de CPU de sistema transcorregut durant l'execució "
+"de\n"
+"    CANONADA.\n"
+"\n"
+"    Opcions:\n"
+"      -p        mostra el resum de temps en format POSIX portable\n"
+"\n"
+"    El valor de la variable TIMEFORMAT s'utilitza per formatar la sortida.\n"
+"\n"
+"    Estat de sortida:\n"
+"    L'estat de sortida és l'estat de sortida de la CANONADA."
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Executa ordres segons la coincidència amb patrons.\n"
+"\n"
+"    Executa ORDRES de forma selectiva en funció de si PARAULA coincideix "
+"amb\n"
+"    PATRÓ.  El signe «|» serveix per a separar múltiples patrons.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna l'estat de sortida de l'última ordre executada."
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Executa ordres en funció d'una condició.\n"
+"\n"
+"    Executa la llista «if ORDRES».  Si l'estat de sortida és zero, llavors\n"
+"    també executa la llista «then ORDRES».  En cas contrari cada una de les\n"
+"    llistes «elif ORDRES» és executada i en cas d'acabar amb estat de\n"
+"    sortida zero, també s'executa la corresponent llista «then ORDRES», i\n"
+"    l'ordre if finalitza.  En cas contrari, la llista «else ORDRES»\n"
+"    s'executa, si és que existeix.  L'estat de sortida la construcció\n"
+"    sencera és l'estat de sortida de l'última ordre executada, o zero si "
+"cap\n"
+"    de les condicions s'avalua com a certa.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna l'estat de l'última ordre executada."
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Executa ordres repetidament mentre es compleixi una condició.\n"
+"\n"
+"    Expandeix i executa ORDRES repetidament mentre l'última ordre de les\n"
+"    «ORDRES while» tingui estat de sortida igual a zero.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna l'estat de l'última ordre executada."
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Executa ordres repetidament mentre no es compleixi una condició.\n"
+"\n"
+"    Expandeix i executa ORDRES repetidament mentre l'última ordre de les\n"
+"    ORDRES «until» tingui estat de sortida diferent de zero.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna l'estat de l'última ordre executada."
+
+# help coproc
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"Crea un coprocés anomenat NOM.\n"
+"\n"
+"    Executa ORDRE de forma asincrònica, amb la sortida estàndard i "
+"l'entrada\n"
+"    estàndard de l'ordre connectades via canonada als descriptors de fitxer\n"
+"    assignats als índexs 0 i 1 de la variable vector NOM.  Per defecte NOM\n"
+"    és \"COPROC\".\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna l'estat de sortida d'ORDRE."
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"Defineix una funció.\n"
+"\n"
+"    Crea una funció de l'intèrpret anomenada NOM.  Quan s'invoca com a "
+"ordre\n"
+"    simple, NOM executa ORDRES en el context de l'intèrpret de qui fa la\n"
+"    crida.  Quan NOM s'invoca, els arguments es passen a la funció com a\n"
+"    $1...$n, i el nom de la funció es troba a $FUNCNAME.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit, excepte si NOM és de només lectura."
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Agrupa ordres de manera que formin una unitat.\n"
+"\n"
+"    Executa un conjunt d'ordres en un grup.  Això permet redirigir la\n"
+"    sortida d'un grup sencer d'ordres.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna l'estat de sortida de l'última ordre executada."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"Reprèn una feina i la porta al primer pla.\n"
+"\n"
+"    Equivalent a utilitzar FEINA com a argument en l'ordre «fg».  Reprèn "
+"una\n"
+"    feina aturada o en segon pla.  FEINA pot ser el nom d'una feina, o el\n"
+"    número d'una feina.  Si es troba un «&» després de FEINA, llavors la\n"
+"    feina s'envia en un segon pla, com si l'especificació de feina\n"
+"    s'utilitzés com a argument en l'ordre «bg».\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna l'estat de sortida de la feina represa."
+
+# help '(('
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Avalua una expressió aritmètica.\n"
+"\n"
+"    EXPRESSIÓ s'avalua segons les normes d'avaluació aritmètica.  És\n"
+"    equivalent a \"let EXPRESSIÓ\".\n"
+"\n"
+"    Estat de sortida:\n"
+"    Si el resultat de l'avaluació és 0, torna 1; altrament torna 0."
+
+# help '[['
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"Executa una ordre condicional.\n"
+"\n"
+"    Torna un estat 0 o 1, depenent del resultat de l'avaluació de\n"
+"    l'expressió condicional EXPRESSIÓ.  Les expressions es componen dels\n"
+"    mateixos elements que en l'ordre interna «test», i es poden combinar\n"
+"    usant els següents operadors.\n"
+"\n"
+"      ( EXPRESSIÓ )     Torna el valor d'EXPRESSIÓ\n"
+"      ! EXPRESSIÓ       Cert si EXPRESSIÓ és fals; altrament fals.\n"
+"      EXPR1 && EXPR2    Cert si tant EXPR1 com EXPR2 són cert; si no, fals.\n"
+"      EXPR1 || EXPR2    Cert si EXPR1 o EXPR2 és cert; si no, fals.\n"
+"\n"
+"    Quan s'utilitzen els operadors «==» o «!=», el component de la dreta\n"
+"    s'interpreta com a un patró i es comprova si coincideix amb la cadena "
+"de\n"
+"    l'esquerra de l'operador.  Quan s'utilitza l'operador «=~», el "
+"component\n"
+"    de la dreta de l'operador s'interpreta com a expressió regular i es\n"
+"    comprova si coincideix amb la cadena de l'esquerra de l'operador.\n"
+"\n"
+"    Els operadors && i || no avaluen EXPR2 si EXPR1 és suficient per\n"
+"    determinar el valor de l'expressió.\n"
+"\n"
+"    Estat de sortida:\n"
+"    0 o 1, depenent del valor d'EXPRESSIÓ."
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"Nom i ús de variables de l'intèrpret habituals.\n"
+"\n"
+"    BASH_VERSION        Informació de la versió de Bash.\n"
+"    CDPATH\t\tLlista de directoris separats per «:» on buscar\n"
+"                        directoris passats com a arguments a «cd».\n"
+"    GLOBIGNORE\t\tLlista de patrons separats per «:» que indiquen noms\n"
+"                        que s'ignoren en fer expansions de noms de fitxer.\n"
+"    HISTFILE\t\tNom del fitxer on es desa l'historial d'ordres.\n"
+"    HISTFILESIZE\tNombre màxim de línies que pot contenir el\n"
+"                        fitxer de l'historial.\n"
+"    HISTSIZE\t\tNombre màxim de línies de l'historial a què un\n"
+"    \t\t\tintèrpret té accés.\n"
+"    HOME\t\tCamí complet cap al vostre directori personal.\n"
+"    HOSTNAME\t\tNom de la màquina actual.\n"
+"    HOSTTYPE\t\tTipus de CPU de la màquina en què corre Bash.\n"
+"    IGNOREEOF\t        Controla el comportament de l'intèrpret en trobar un\n"
+"    \t\t\tcaràcter EOF (final de fitxer) com a únic caràcter.\n"
+"                        Si la variable està definida, llavors el seu valor\n"
+"                        és el nombre de caràcters EOF seguits que es poden\n"
+"                        llegir en una línia buida abans que l'intèrpret\n"
+"                        surti (per defecte: 10).  Si no està definida, EOF\n"
+"                        s'interpreta com el final de les dades d'entrada.\n"
+"    MACHTYPE\t\tCadena que descriu el sistema en què corre Bash.\n"
+"    MAILCHECK\t\tAmb quina freqüència, en segons, Bash comprova si hi\n"
+"                        ha correu nou.\n"
+"    MAILPATH\t\tLlista de fitxers separats per «:» que Bash comprova\n"
+"                        si tenen correu nou.\n"
+"    OSTYPE\t\tLa versió de Unix en què corre Bash.\n"
+"    PATH\t\tLlista de directoris separats per «:» on buscar quan\n"
+"    \t\t\tse cerquen ordres.\n"
+"    PROMPT_COMMAND\tOrdre que s'executa cada cop abans de mostrar\n"
+"    \t\t\tl'introductor de l'intèrpret.\n"
+"    PS1\t\t\tCadena de l'introductor principal.\n"
+"    PS2\t\t\tCadena de l'introductor secundari.\n"
+"    PWD\t\t\tCamí complet cap al directori corrent.\n"
+"    SHELLOPTS\t\tLlista d'opcions habilitades separades per «:».\n"
+"    TERM\t\tNom del tipus de terminal actual.\n"
+"    TIMEFORMAT\t\tFormat de sortida per a les estadístiques de temps\n"
+"    \t\t\tproduïdes per l'ordre «time».\n"
+"    auto_resume\t\tNo-nul·la significa que una ordre sola en una línia\n"
+"    \t\t\tes busca en primera instància a la llista actual de\n"
+"    \t\t\tfeines aturades.  Si es troba, aquella feina es\n"
+"                        passa a primer pla.  El valor «exact» significa que\n"
+"                        l'ordre ha de coincidir exactament amb alguna ordre\n"
+"                        de la llista de feines aturades.  El valor\n"
+"                        «substring» significa que l'ordre ha de coincidir\n"
+"                        amb una subcadena de la feina.  Qualsevol altre\n"
+"                        valor significa que l'ordre ha de ser el prefix\n"
+"                        d'una feina aturada.\n"
+"    histchars\t\tCaràcters que controlen l'expansió de l'historial i\n"
+"    \t\t\tles substitucions ràpides.  El primer caràcter és el\n"
+"   \t\t\tcaràcter de substitució de l'historial, habitualment\n"
+"    \t\t\t«!».  El segon és el caràcter de «substitució\n"
+"                        ràpida», normalment «^».  El tercer és el caràcter\n"
+"                        de «comentari d'historial», normalment «#».\n"
+"    HISTIGNORE\t\tLlista de patrons separats per «:» utilitzats per a\n"
+"    \t\t\tdecidir si les ordres s'han de desar a l'historial.\n"
+
+# si modifiqueu aquesta cadena cal actualitzar la còpia que es troba més
+# enrere en aquest fitxer
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Afegeix directoris a la pila.\n"
+"\n"
+"    Afegeix un directori al capdamunt de la pila de directoris, o fa girar\n"
+"    la llista, de manera que al capdamunt de la pila hi queda el directori\n"
+"    de treball corrent.  Sense arguments, intercanvia els dos directoris de\n"
+"    més amunt.\n"
+"\n"
+"    Opcions:\n"
+"      -n        Omet el canvi de directori quan s'afegeixen directoris a la\n"
+"                pila, de manera que només canvia el contingut de la pila.\n"
+"\n"
+"    Arguments:\n"
+"\n"
+"      +N        Gira la llista de manera tal que l'N-èssim directori\n"
+"                (comptant des de l'esquerra de la llista que mostra «dirs»,\n"
+"                començant des de zero) queda a dalt de tot.\n"
+"\n"
+"      -N        Gira la llista de manera tal que l'N-èssim directori\n"
+"                (comptant des de la dreta de la llista que mostra «dirs»,\n"
+"                començant des de zero) queda a dalt de tot.\n"
+"\n"
+"      dir       Afegeix DIR al capdamunt de la pila de directoris, i el\n"
+"                converteix en el nou directori de treball corrent.\n"
+"\n"
+"    Podeu veure el contingut de la pila de directoris amb l'ordre «dirs».\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit, excepte si s'ha rebut un argument invàlid, o el canvi de\n"
+"    directori falla."
+
+# si modifiqueu aquesta cadena cal actualitzar la còpia que es troba més
+# enrere en aquest fitxer
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Treu directoris de la pila.\n"
+"\n"
+"    Elimina entrades de la pila de directoris.  Sense arguments, elimina el\n"
+"    directori al capdamunt de la pila, i canvia al nou directori de dalt de\n"
+"    la pila.\n"
+"\n"
+"    Opcions:\n"
+"      -n       Omet el canvi de directori quan s'eliminen directoris de la\n"
+"               pila, de manera que només canvia el contingut de la pila.\n"
+"\n"
+"    Arguments:\n"
+"      +N       Elimina l'entrada N-èssima, comptant des de l'esquerra de la\n"
+"               llista que mostra «dirs», començant des de zero.  Per\n"
+"               exemple: «popd +0» elimina el primer directori, i «popd +1»\n"
+"               el segon.\n"
+"\n"
+"      -N       Elimina l'entrada N-èssima, comptant des de la dreta de la\n"
+"               llista que mostra «dirs», començant des de zero.  Per\n"
+"               exemple: «popd -0» elimina l'últim directori, i «popd -1» el\n"
+"               penúltim.\n"
+"\n"
+"    Podeu veure el contingut de la pila de directoris amb l'ordre «dirs».\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit, excepte si es rep un argument invàlid o el canvi de\n"
+"    directori falla."
+
+# si modifiqueu aquesta cadena cal actualitzar la còpia que es troba més
+# enrere en aquest fitxer
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Mostra la pila de directoris.\n"
+"\n"
+"    Mostra la llista actual de directoris recordats.  Els directoris són\n"
+"    afegits a la llista mitjançant l'ordre «pushd»; podeu recórrer la "
+"llista\n"
+"    de directoris cap enrere amb l'ordre «popd».\n"
+"\n"
+"    Opcions:\n"
+"      -c        neteja la pila, esborrant-ne tots els elements\n"
+"      -l        no mostra les versions abreviades (amb el prefix ~) dels\n"
+"                directoris relatius al vostre directori personal\n"
+"      -p        mostra la pila, una entrada per línia\n"
+"      -v        mostra la pila, una entrada per línia indicant la posició a\n"
+"                la pila\n"
+"\n"
+"    Arguments:\n"
+"      +N        Mostra l'entrada N-èssima, comptant des de l'esquerra de la\n"
+"                llista mostrada per «dirs» quan s'invoca sense opcions, \n"
+"                començant des de zero.\n"
+"\n"
+"      -N        Mostra l'entrada N-èssima, comptant des de la dreta de la\n"
+"                llista mostrada per «dirs» quan s'invoca sense opcions,\n"
+"                començant des de zero.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Retorna èxit, excepte si es rep una opció invàlida o es produeix un\n"
+"    error."
+
+#: builtins.c:1916
+#, fuzzy
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"Activa i desactiva opcions de l'intèrpret.\n"
+"\n"
+"    Canvia l'estat de cada OPCIÓ.  Si no especifiqueu cap OPCIÓ, mostra una\n"
+"    llista de totes les opcions indicant si estan activades o no.\n"
+"\n"
+"    Opcions:\n"
+"      -o        limita les opcions a les que es poden canviar amb «set -o»\n"
+"      -p\tmostra totes les opcions indicant-ne l'estat\n"
+"      -q\tsuprimeix la sortida\n"
+"      -s\tactiva OPCIÓ\n"
+"      -u\tdesactiva OPCIÓ\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit si OPCIÓ està activada; falla si especifiqueu una opció\n"
+"    invàlida o OPCIÓ està desactivada."
+
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"Formata i escriu ARGUMENTS d'acord amb FORMAT.\n"
+"\n"
+"    Opcions:\n"
+"      -v var    assigna la sortida a la variable VAR en lloc d'enviar-la a\n"
+"                la sortida estàndard\n"
+"\n"
+"    FORMAT és una cadena de caràcters que conté tres tipus d'objectes:\n"
+"    caràcters normals, que simplement es copien a la sortida estàndard;\n"
+"    seqüències d'escapada, que es transformen i es copien a la sortida\n"
+"    estàndard; i especificacions de format, cada una de les quals provoca\n"
+"    que s'escrigui un argument successiu a la sortida estàndard.\n"
+"\n"
+"    A banda de les especificacions de format estàndards descrites a\n"
+"    printf(1), printf també interpreta:\n"
+"\n"
+"      %b       expandeix seqüències d'escapada a l'argument corresponent\n"
+"      %q       afegeix les cometes necessàries perquè l'argument pugui ser\n"
+"               utilitzat com a entrada de l'intèrpret\n"
+"      %(fmt)T  escriu la cadena resultant de passar FMT a strftime(3) com a\n"
+"               argument\n"
+"\n"
+"    El format es reutilitza tant com sigui necessari fins a consumir tots\n"
+"    els arguments.  Si hi ha menys arguments dels que el format requereix,\n"
+"    la resta d'especificacions de format funcionen com si s'hagués\n"
+"    especificat un valor de zero o una cadena nul·la, segons el cas.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Retorna èxit, excepte si es rep una opció invàlida o es produeix un\n"
+"    error d'assignació o d'escriptura."
+
+#: builtins.c:1971
+#, fuzzy
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Especifica com Readline ha de completar arguments.\n"
+"\n"
+"    Per a cada NOM, especifica com s'han de completar els arguments.  Si no\n"
+"    s'indica cap opció, les especificacions de compleció existents es\n"
+"    mostren en un format que permet reutilitzar-les com a entrada.\n"
+"\n"
+"    Opcions:\n"
+"      -p        mostra les especificacions existents en format reciclable\n"
+"      -r        suprimeix l'especificació de compleció per a NOM, o, si no\n"
+"      \t\ts'indica cap NOM, totes les especificacions de compleció\n"
+"      -D        assigna les accions o complecions a totes les ordres que no\n"
+"                tenen definida una compleció específica\n"
+"      -E        assigna les accions o complecions a ordres \"en blanc\", o\n"
+"                sigui, als intents de completar una línia en blanc\n"
+"\n"
+"    Quan s'intenta una compleció, les accions s'apliquen en l'ordre en què\n"
+"    les opcions -D i -E apareixen al paràgraf anterior.  L'opció -D té\n"
+"    preferència sobre l'opció -E.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit, excepte si passeu una opció invàlida o es produeix un error."
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Mostra possibles complecions en funció de les opcions.\n"
+"\n"
+"    Aquesta ordre està pensada per a ser utilitzada en una funció que "
+"generi\n"
+"    possibles complecions.  Si especifiqueu l'argument opcional PARAULA, es\n"
+"    limiten les complecions a aquelles que coincideixen amb PARAULA.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit, excepte si passeu una opció invàlida o es produeix un error."
+
+#: builtins.c:2016
+#, fuzzy
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"Modifica o mostra opcions de compleció.\n"
+"\n"
+"    Modifica les opcions de compleció de NOM, o, si no especifiqueu cap "
+"NOM,\n"
+"    la compleció que s'està executant en el moment.  Si no s'indica cap\n"
+"    OPCIÓ, mostra les opcions de compleció per a cada NOM o\n"
+"    l'especificació de compleció en ús.\n"
+"\n"
+"    Opcions:\n"
+"        -o opció        Activa OPCIÓ per a NOM\n"
+"        -D              Canvia les opcions de compleció d'ordres per "
+"defecte\n"
+"        -E              Canvia les opcions de compleció d'ordres \"buides\"\n"
+"\n"
+"    Si utilitzeu «+o» en lloc de «-o», desactiva l'opció especificada.\n"
+"\n"
+"    Arguments:\n"
+"\n"
+"    Cada NOM és el nom d'una ordre per la qual s'ha d'haver definit una\n"
+"    especificació de compleció amb l'ordre interna «complete».  Si no\n"
+"    especifiqueu cap NOM, compopt s'ha de cridar des d'una funció "
+"generadora\n"
+"    de complecions, i les opcions que es modifiquen afecten la generació de\n"
+"    complecions que s'està executant en aquell moment.\n"
+"\n"
+"    Estat de sortida: \n"
+"    Torna èxit, excepte si passeu alguna opció no vàlida o NOM no té\n"
+"    definida cap especificació de compleció."
+
+# help readarray
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"Llegeix línies d'un fitxer cap a una variable vector.\n"
+"\n"
+"    Llegeix línies de l'entrada estàndard cap a la variable VECTOR, o del\n"
+"    descriptor de fitxer FD si especifiqueu l'opció -u.  La variable vector\n"
+"    per defecte és MAPFILE.\n"
+"\n"
+"    Opcions:\n"
+"      -d delim  Usa DELIM com delimitador de línies, en lloc del caràcter "
+"de\n"
+"                salt de línia\n"
+"      -n nombre Copia com a màxim NOMBRE línies.  Si NOMBRE és 0, es copien\n"
+"    \t\ttotes les línies.\n"
+"      -O origen Comença l'assignació a l'índex ORIGEN, per defecte 0.\n"
+"      -s nombre Descarta les primeres NOMBRE línies.\n"
+"      -t        Estripa el caràcter de salt de línia de cada línia llegida.\n"
+"      -u fd     Llegeix el descriptor de fitxer FD, en lloc de l'entrada\n"
+"                estàndard.\n"
+"      -C callback         Avalua CALLBACK cada QUÀNTUM línies llegides.\n"
+"      -c quàntum          Nombre de línies llegides abans de cridar "
+"CALLBACK\n"
+"\n"
+"    Arguments:\n"
+"      VECTOR    Nom de la variable vector per a les dades.\n"
+"\n"
+"    Si especifiqueu l'opció -C sense -c, el quàntum per defecte és 5000.\n"
+"    Quan s'avalua la funció CALLBACK, se li passa l'índex del proper "
+"element\n"
+"    del vector i la línia que s'assigna a aquest element, com a arguments\n"
+"    addicionals.\n"
+"\n"
+"    Si no especifiqueu un origen explícit, se suprimeix qualsevol valor\n"
+"    assignat a VECTOR abans d'assignar cap valor.\n"
+"\n"
+"    Estat de sortida:\n"
+"    Torna èxit, excepte si passeu una opció no vàlida o VECTOR és de només\n"
+"    lectura o no és una variable vector."
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Llegeix línies d'un fitxer cap a una variable vector.\n"
+"\n"
+"    Un sinònim de «mapfile»."
+
+#, fuzzy
+#~ msgid "Copyright (C) 2019 Free Software Foundation, Inc."
+#~ msgstr "Copyright (C) 2016 Free Software Foundation, Inc."
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process: procés %5ld (%s) a the_pipeline"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "Senyal Desconegut #"
+
+#, fuzzy
+#~ msgid "Copyright (C) 2014 Free Software Foundation, Inc."
+#~ msgstr "Copyright (C) 2013 Free Software Foundation, Inc."
+
+#~ msgid ":"
+#~ msgstr ":"
+
+#~ msgid "true"
+#~ msgstr "true"
+
+#~ msgid "false"
+#~ msgstr "false"
+
+#~ msgid "times"
+#~ msgstr "times"
diff --git a/po/cs.gmo b/po/cs.gmo
new file mode 100644
index 0000000..8058f0b
--- /dev/null
+++ b/po/cs.gmo
diff --git a/po/cs.po b/po/cs.po
new file mode 100644
index 0000000..52abc0a
--- /dev/null
+++ b/po/cs.po
@@ -0,0 +1,6630 @@
+# Czech tranlation for bash.
+# Copyright (C) 2008 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+# Petr Pisar <petr.pisar@atlas.cz>, 2008, 2009, 2010, 2011, 2012, 2013, 2014.
+# Petr Pisar <petr.pisar@atlas.cz>, 2015, 2016, 2018, 2019.
+#
+# alias → alias
+# subscript → podskript
+# subroutine → podprogram
+# completion options → možnosti doplňování
+# shell option → přepína� shellu (shopt)
+# Názvy signálů a stavů procesu by měly souhlasit se signal(7).
+msgid ""
+msgstr ""
+"Project-Id-Version: bash 5.0\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2019-10-29 19:12+01:00\n"
+"Last-Translator: Petr Pisar <petr.pisar@atlas.cz>\n"
+"Language-Team: Czech <translation-team-cs@lists.sourceforge.net>\n"
+"Language: cs\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "chybný podskript pole"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr "%s: odstraňuje se atribut odkazu na název"
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: �íslované pole nezle převést na pole asociativní"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: neplatný klí� asociativního pole"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: přes ne�íselný indexu nelze dosadit"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr "%s: %s: při přiřazovaní asociativního pole se musí použít podskript"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: nelze vytvořit: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr "bash_execute_unix_command: pro příkaz nelze nalézt klávesovou mapu "
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: první nebílý znak není „\"“"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "ne zavírající „%c“ v %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: chybí dvojte�kový oddělova�"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "„%s“: nelze zrušit vazbu"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr "závorková expanze: nelze alokovat paměť pro %s"
+
+# TODO: pluralize
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr "závorková expanze: alokace paměti pro %u prvků selhala"
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr "závorková expanze: alokace paměti pro „%s“ selhala"
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "„%s“: chybný název aliasu"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "upravování řádku není povoleno"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "„%s“: chybný název klávesové mapy"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: nelze �íst: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "„%s“: neznámé jméno funkce"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s není svázán s žádnou klávesou.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s lze vyvolat přes "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "„%s“: nelze zrušit vazbu"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "po�et smy�ek"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "má smysl jen ve smy�kách „for“, „while“ nebo „until“"
+
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Vrátí kontext aktuálního podprogramu.\n"
+"    \n"
+"    Bez V�RAZU vrátí „$řádek $název_souboru“. S V�RAZEM vrátí\n"
+"    „$řádek $podprogram $název_souboru“; tuto zvláštní informaci lze\n"
+"    využít pro výpis zásobníku volání.\n"
+"    \n"
+"    Hodnota V�RAZU ur�uje, kolik rámců volání se má zpětně projít od toho\n"
+"    sou�asného; vrcholový rámec má �íslo 0.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrací 0, pokud shell provádí shellovou funkci a V�RAZ je platný."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "není nestavena HOME"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "příliš mnoho argumentů"
+
+#: builtins/cd.def:342
+msgid "null directory"
+msgstr "adresář s prázdným názvem"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "není nastaveno OLDPWD"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "řádek %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "varování: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: užití: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: přepína� vyžaduje argument"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: vyžadován �íselný argument"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: nenalezeno"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: chybný přepína�"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: chybný název přepína�e"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "„%s“: není platným identifikátorem"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "neplatné osmi�kové �íslo"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "chybné šestnáctkové �íslo"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "chybné �íslo"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: chybné ur�ení signálu"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "„%s“: není PID ani platným ozna�ením úlohy"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: proměnná pouze pro �tení"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s mimo rozsah"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "argument"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s mimo rozsah"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: žádná taková úloha"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: žádné řízení úloh"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "žádné řízení úloh"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: omezeno"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "omezeno"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: není vestavěným příkazem shellu"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "chyba zápisu: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "chyba při nastavování vlastností terminálu: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "chyba při získávání vlastností terminálu: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: chyba při zjišťování sou�asného adresáře: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: nejednozna�né ur�ení úlohy"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr "k této verzi není dostupná nápověda"
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: nelze zrušit: %s jen pro �tení"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: nelze zrušit"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: neplatný název akce"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: žádné doplňování neur�eno"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "varování: přepína� -F možná nebude dělat, co jste �ekali"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "varování: přepína� -C možná nebude dělat, co jste �ekali"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "doplňovací funkce se právě nevykonává"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "může být použito jen ve funkci"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr "%s: proměnná s odkazem nemůže být polem"
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr "%s: proměnná s odkazem na název nemůže odkazovat sama na sebe"
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s: kruhový odkaz na název"
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "„%s“: neplatný název proměnné pro odkaz na název"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "„-f“ nezle použít na výrobu funkce"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: funkce jen pro �tení"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr "%s: přiřazení do složeného pole uzavřeného v uvozovkách je zastaralé"
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: takto nelze likvidovat pole"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: asociativní pole nelze převést na �íslované pole"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "dynamické nahrávání není dostupné"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "sdílený objekt %s nelze otevřít: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "ve sdílením objektu %2$s nelze nalézt %1$s: %3$s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: není dynamicky nahráno"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr "zaváděcí funkce pro %s vrací chybu (%d): nezavedeno"
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: není dynamicky nahráno"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: nelze smazat: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: je adresářem"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: není oby�ejný soubor"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: soubor je příliš velký"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: binární soubor nelze spustit"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: nelze provést: %s"
+
+# XXX: Toto je zpráva interaktivního shellu při příkazu exit informující
+# o odhlášení
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "odhlášení\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "toto není login shell: použijte „exit“"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Jsou zde pozastavené úlohy.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Jsou zde běžící úlohy.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "žádný příkaz nenalezen"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "ur�ení historie"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: do�asný soubor nelze otevřít: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "sou�asný"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "úloha %d spuštěna bez správy úloh"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: chybný přepína� – %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: přepína� vyžaduje argument – %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "hashování zakázáno"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: tabulka hashů je prázdná\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "zásahů\tpříkaz\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Příkazy shellu shodující se s klí�ovým slovem „"
+msgstr[1] "Příkazy shellu shodující se s klí�ovými slovy „"
+msgstr[2] "Příkazy shellu shodující se s klí�ovými slovy „"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"žádné téma nápovědy se nehodí pro „%s“. Zkuste „help help“ nebo „man -k %s“ "
+"nebo „info %s“."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: nelze otevřít: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Tyto příkazy shellu jsou vnitřně definovány. Napište „help“, abyste získali\n"
+"tento seznam. Podrobnosti o funkci „název“ získáte příkazem „help název“.\n"
+"Příkazem „info bash“ získáte obecné informace o tomto shellu.\n"
+"Použijte „man -k“ nebo „info“, chcete-li zjistit více o příkazech, které\n"
+"na tomto seznamu nejsou.\n"
+"\n"
+"Hvězdi�ka (*) vedle jména znamená, že příkaz je zakázán.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "nelze použít více jak jeden z -anrw"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "místo v historii"
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: neplatný �asový údaj"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: expanze historie selhala"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: inlib selhala"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "s „-x“ nejsou dovoleny další přepína�e"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: argumenty musí být proces nebo identifikátor úlohy"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Neznámá chyba"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "o�ekáván výraz"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: není (proměnnou typu) indexované pole"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: chybné ur�ení deskriptoru souboru"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: neplatný deskriptor souboru: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: chybný po�et řádků"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: chybný po�átek pole"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: neplatné množství mezi voláními"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "prázdný název proměnné typu pole"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "je vyžadována podpora proměnných typu pole"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "„%s“: postrádám formátovací znak"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "„%c“: chybné ur�ení �asového limitu"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "„%c“: neplatný formátovací znak"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "varování: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "potíže s rozebráním formátovacího řetězce: %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "u \\x chybí šestnáctková �íslovka"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "u \\%c chybí unikódová �íslovka"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "žádný další adresář"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s: chybný argument"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<žádný aktuální adresář>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "prázdný zásobník adresářů"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "pořadí v zásobníku adresářů"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Zobrazí seznam právě zapamatovaných adresářů. Adresáře si najdou svoji\n"
+"    cestu na seznam příkazem „pushd“ a procházet seznamem zpět lze příkazem\n"
+"    „popd“.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -c\tvyprázdní zásobník adresářů tím, že smaže všechny jeho prvky\n"
+"      -l\tnevypisuje adresáře relativní vašemu domovskému adresáři pomocí\n"
+"    \tvlnkové předpony\n"
+"      -p\tvypíše zásobník adresářů stylem jedna položka na jeden řádek\n"
+"      -v\tvypíše zásobník adresářů stylem jedna položka na jeden řádek\n"
+"    \tuvozená svojí pozicí na zásobníku\n"
+"    \n"
+"    Argumenty:\n"
+"      +N\tZobrazí N. položku po�ítáno zleva na seznamu, který zobrazuje\n"
+"    \tdirs, když je vyvolán bez přepína�ů, po�ínaje nulou.\n"
+"    \n"
+"      -N\tZobrazí N. položku po�ítáno zprava na seznamu, který zobrazuje\n"
+"    \tdirs, když je vyvolán bez přepína�ů, po�ínaje nulou."
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Přidá adresář na vrchol zásobníku adresářů nebo zásobník zrotuje tak,\n"
+"    že nový vrchol zásobníku se stane sou�asným pracovním adresářem. Bez\n"
+"    argumentů prohodí dva vrchní adresáře.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -n\tPotla�í obvyklou změnu adresáře, když se na zásobník přidávají\n"
+"    \tadresáře, takže změněn bude pouze zásobník.\n"
+"    \n"
+"    Argumenty:\n"
+"      +N\tZrotuje zásobník tak, že N. adresář (po�ítáno zleva na seznamu\n"
+"    \tzobrazovaném pomocí „dirs“, po�ínaje nulou) se dostane na vrchol.\n"
+"    \n"
+"      -N\tZrotuje zásobník tak, že N. adresář (po�ítáno zprava na seznamu\n"
+"    \tzobrazovaném pomocí „dirs“, po�ínaje nulou) se dostane na vrchol.\n"
+"    \n"
+"      ADRES�Ř\n"
+"    \tPřidá ADRES�Ř na vrchol zásobníku adresářů a u�iní jej novým\n"
+"    \tsou�asným pracovním adresářem.\n"
+"    \n"
+"    Zásobník adresářů si můžete prohlédnout příkazem „dirs“."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Odstraní položku ze zásobníku adresářů. Bez argumentů odstraní adresář\n"
+"    z vrcholu zásobníku a přepne se do nového vrcholového adresáře.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -n\tPotla�í obvyklou změnu adresáře, když se ze zásobníku odebírají\n"
+"    \tadresáře, takže změněn bude pouze zásobník.\n"
+"    \n"
+"    Argumenty:\n"
+"      +N\tOdstraní N. položku po�ítáno zleva na seznamu zobrazovaném pomocí\n"
+"    \t„dirs“, po�ínaje nulou. Na příklad: „popd +0“ odstraní první\n"
+"    \tadresář, „popd -1“ druhý.\n"
+"    \n"
+"      -N\tOdstraní N. položku po�ítáno zprava na seznamu zobrazovaném "
+"pomocí\n"
+"    \t„dirs“, po�ínaje nulou. Na příklad: „popd -0“ odstraní poslední\n"
+"    \tadresář, „popd -1“ další vedle posledního.\n"
+"    \n"
+"    Zásobník adresářů si můžete prohlédnout příkazem „dirs“."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: chybné ur�ení �asového limitu"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "chyba �tení: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr "„return“ lze provést jen z funkce nebo skriptu na�teného přes „source“"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "funkci i proměnnou nelze rušit sou�asně"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: není (proměnnou typu) pole"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: není funkcí"
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr "%s: nelze exportovat"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "po�et shiftů"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "přepína� shellu nelze zároveň nastavit a zrušit"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: chybný název přepína�e shellu"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "vyžadován argument s názvem souboru"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: soubor nenalezen"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "nelze pozastavit"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "login shell nelze pozastavit"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s je alias na „%s“\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s je klí�ové slovo shellu\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s je funkce\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s je zvláštní sou�ást shellu\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s je sou�ást shellu\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s je %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s je zahashován (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: chybný argument s limitou"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "„%c“: chybný příkaz"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: limit nelze zjistit: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "limit"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: limit nelze změnit: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "osmi�kové �íslo"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "„%c“: chybný operátor symbolických práv"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "„%c“: chybný znak symbolický práv "
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " řádek "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "poslední příkaz: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Ukon�uji…"
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr "INFORMACE: "
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "chyba neznámého příkazu"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "chybný druh příkazu"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "chybný konektor"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "chybný skok"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: nevázaná proměnná"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\a�asový limit pro �ekání na vstup vypršel: automatické odhlášení\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "standardní vstup nelze přesměrovat z /dev/null: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "TIMEFORMAT: „%c“: chybný formátovací znak"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr "execute_coproc: koproces [%d:%s] stále existuje"
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "chyba v rouře"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr "eval: maximální úroveň zanoření funkce eval byla překro�ena (%d)"
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr "%s: maximální úroveň zanoření funkce source byla překro�ena (%d)"
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr "%s: maximální úroveň zanoření funkcí byla překro�ena (%d)"
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: omezeno: v názvu příkazu nesmí být „/“"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: příkaz nenalezen"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: chybný interpretr"
+
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: binární soubor nelze spustit: %s"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "„%s“: je zvláštní vestavěný příkaz shellu"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "deskriptor souboru %d nelze duplikovat na deskriptor %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "úroveň rekurze výrazu byla překro�ena"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "zásobník rekurze podtekl"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "syntaktická chyba ve výrazu"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "pokus o přiřazení do ne-proměnné"
+
+#: expr.c:530
+msgid "syntax error in variable assignment"
+msgstr "syntaktická chyba v přiřazení do proměnné"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "dělení nulou"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "chyba: chybný expassing token"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "v podmíněném výrazu o�ekávána „:“"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "mocnitel menší než 0"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "po přednostním zvýšení nebo snížení o�ekáván identifikátor"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "postrádám „)“"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "syntaktická chyba: o�ekáván operand"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "syntaktická chyba: chybný aritmetický operátor"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (chybný token je „%s“)"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "chybný aritmetický základ"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: chybný po�et řádků"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "hodnot je pro základ příliš velká"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: chyba výrazu\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: rodi�ovské adresáře nejsou přístupné"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "na deskriptoru %d nelze resetovat režim nodelay"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr "nový deskriptor souboru pro vstup bashe z deskr. %d nelze alokovat"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input: buffer již pro nový deskriptor %d existuje"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: pgrp roury"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "forknutý PID %d se objevil v běžící úloze %d"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "mažu pozastavenou úlohu %d se skupinou procesů %ld"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process: PID %5ld (%s) ozna�en za stále živého"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: žádný takový PID"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Signál %d"
+
+# XXX: (úloha) dokon�na. Používat ženský rod i unásledujících. Jedná se
+# o výpis úloh.
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Dokon�ena"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Pozastavena"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Pozastavena (%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "Běží"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Dokon�ena (%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Ukon�ena %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Stav neznámý"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(core dumped [obraz paměti uložen]) "
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (cwd: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "setpgid na potomku (z %ld na %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: PID %ld není potomkem tohoto shellu"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: Žádný záznam o procesu %ld"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: úloha %d je pozastavena"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: žádná taková úloha"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: úloha skon�ila"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: úloha %d je již na pozadí"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr "waitchld: zapíná se WNOHANG, aby se zabránilo neur�itému zablokování"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: řádek %d: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (core dumped [obraz paměti uložen])"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(cwd nyní: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: getpgrp selhalo"
+
+#: jobs.c:4447
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: správa úloh nefunguje na pozadí"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: disciplína linky"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "nelze nastavit skupinu procesů terminálu (%d)"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "žádná správa úloh v tomto shellu"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: předpoklad nesplněn: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d: zbabraný předpoklad\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "není známo"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: blok v seznamu uvolněných zbit"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: zavoláno s argumentem již uvolněného bloku"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: zavoláno s argumentem nenaalokovaného bloku"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: zjištěno podte�ení, mh_nbytes mimo rozsah"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: zjištěno podte�ení, mh_nbytes mimo rozsah"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: velikosti po�áte�ního a koncového kusu se liší"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: zavoláno s argumentem nenaalokovaného bloku"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc: zjištěno podte�ení, mh_nbytes mimo rozsah"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc: zjištěno podte�ení, mh_nbytes mimo rozsah"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: velikosti po�áte�ního a koncového kusu se liší"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: tabulka alokací je plná FIND_ALLOC?\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: %p již obsažen v tabulce jako alokovaný?\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: %p již obsažen v tabulce jako volný?\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "chybný základ"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: stroj není znám"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: chybná služba"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: chybné ur�ení síťové cesty"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "síťové operace nejsou podporovány"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: národní prostředí nelze změnit (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: národní prostředí nelze změnit (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: národní prostředí nelze změnit (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: národní prostředí nelze změnit (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "V $_ máte poštu"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "V $_ máte novou poštu"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "Pošta v %s je pře�tená\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "chyba syntaxe: vyžadován aritmetický výraz"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "chyba syntaxe: neo�ekávaný „;“"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "chyba syntaxe: „((%s))“"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: chybný druh instrukce %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr "„here“ dokument na řádku %d ukon�en koncem souboru (požadováno „%s“)"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr "make_redirection: instrukce přesměrování „%d“ mimo rozsah"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+"shell_getc: shell_input_line_size (%zu) přesahuje SIZE_MAX (%lu): řádek "
+"zkrácen"
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr "maximální po�et here dokumentů překro�en"
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "neo�ekávaný konec souboru při hledání znaku odpovídajícímu „%c“"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "neo�ekávaný konec souboru při hledání „]]“"
+
+# XXX: Condional means condition (adj.) probably. Can English distinguish
+# between the condition (podmínkový) and the code branch (podmíněný)? Check
+# for all "conditional" string occurences.
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "chyba syntaxe ve výrazu podmínky: neo�ekávaný token „%s“"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "chyba syntaxe ve výrazu podmínky"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "neo�ekávaný token „%s“, o�ekávána „)“"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "o�ekávána „)“"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "neo�ekávaný argument „%s“ u podmínkového unárního operátoru"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "neo�ekávaný argument u podmínkového unárního operátoru"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "neo�ekávaný token „%s“, o�ekáván podmínkový binární operátor"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "o�ekáván podmínkový binární operátor"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "neo�ekávaný argument „%s„ u podmínkového binárního operátoru"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "neo�ekávaný argument u podmínkového binárního operátoru"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "neo�ekávaný token „%c“ v podmínkovém příkazu"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "neo�ekávaný token „%s“ v podmínkovém příkazu"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "neo�ekávaný token %d v podmínkovém příkazu"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "chyba syntaxe poblíž neo�ekávaného tokenu „%s“"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "chyba syntaxe poblíž „%s“"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "chyba syntaxe: nenadálý konec souboru"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "chyba syntaxe"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Shell lze ukon�it příkazem „%s“.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "nenadálý konec souboru při hledání odpovídající „)“"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "doplňování: funkce „%s“ nenalezena"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr "programmable_completion: %s: možná smy�ka opakování"
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: NULLOV� COMPSPEC"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: chybná propojka „%d“"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: neplatný deskriptor souboru"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: nullový ukazatel na soubor"
+
+# fd, fp a fileno jsou identifikátory v kódu
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace: fd (%d) != fileno fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: „%c“: chybný formátovací znak"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "deskriptor souboru mimo rozsah"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: nejednozna�né přesměrování"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: existující soubor nelze přepsat"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: omezeno: výstup nelze přesměrovat"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "pro „here“ dokument nelze vytvořit do�asný soubor: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: deskriptor souboru nelze přiřadit do proměnné"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "/dev/(tcp|udp)/host/port není bez síťování podporováno"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "chyba přesměrování: deskriptor souboru nelze duplikovat"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "nelze nalézt /tmp, vytvořte jej, prosím!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp musí být platným názvem pro adresář"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr "v interaktivních shellech se režim krásného výpisu nepoužije"
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: chybný přepína�"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "UID nelze nastavit na %d: efektivní UID je %d"
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "GID nelze nastavit na %d: efektivní GID je %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr "debuger nelze spustit, ladicí režim zakázán"
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr "%s: Je adresářem"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "Nemám žádné jméno!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, verze %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Použití:\t%s [Dlouhý GNU přepína�] [přepína�]…\n"
+"\t%s [Dlouhý GNU přepína�] [přepína�] skriptový_soubor…\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "Dlouhé GNU přepína�e:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Přepína�e shellu:\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-ilrsD nebo -c příkaz nebo -O shopt_přepína�\t(pouze při vyvolání)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s nebo -o přepína�\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+"Podrobnosti o přepína�ích shellu získáte tím, že napíšete „%s -c \"help set"
+"\"“.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr ""
+"Podrobnosti o příkazech vestavěných do shellu získáte tím, že\n"
+"napište „%s -c help“.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "Chyby nahlásíte příkazem „bashbug“.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr "Domovská stránka bashe: <http://www.gnu.org/software/bash>\n"
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr "Obecný návod na použití softwaru GNU: <http://www.gnu.org/gethelp/>\n"
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: neplatná operace"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Falešný signál"
+
+# Překlady názvů signálů převzaty (s mírnými úpravami) z �eské překladu
+# manuálové stránky signal(7). 
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Linka terminálu zavěšena"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Přerušení"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Ukon�ení"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Neplatná instrukce"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "Přerušení při ladění"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "Ukon�ení funkcí abort()"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "Instrukce EMT"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Výjimka při práci s pohyblivou řádovou �árkou"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Zabit"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Chyba sběrnice"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Chyba segmentace"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Špatné volání systému"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Z roury nikdo ne�te"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Signál �asova�e"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Ukon�it"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Čekají urgentní I/O data"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Pozastaveno (signálem)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Pokra�ovat"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Potomek byl pozastaven nebo zemřel"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Pozastaveno (vstupem TTY)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Pozastaveno (výstupem na TTY)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "I/O je připraveno"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "Dosažen limit procesorového �asu"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "Dosažen limit velikosti souboru"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Časova� (virtuální)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Časova� (profilovací)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Změna okna"
+
+# XXX: SIGLOST
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Zámek záznamu"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Uživatelský signal 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Uživatelský signál 2"
+
+# FIXME: HFT znamená High Frequency Timer? Zkontrolovat i další výskyty
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "vstupní data HFT �ekají"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "hrozí selhání napájení"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "hrozí selhání systému"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "přesunout proces na jiný procesor"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "chyba programování"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "Režim HFT sledování přidělen"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "Režim HFT sledování odebrán"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "HFT zvuková posloupnost byla dokon�ena"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "Požadavek o informaci"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "Neznámý signál �. %d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "chybná substituce: v %2$s chybí uzavírací „%1$s“"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: seznam nelze přiřadit do prvku pole"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "nelze vyrobit rouru za ú�elem substituce procesu"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "nelze vytvořit potomka za ú�elem substituce procesu"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "pojmenovanou rouru %s nelze otevřít pro �tení"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "pojmenovanou rouru %s nelze otevřít pro zápis"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "pojmenovanou rouru %s nelze zdvojit jako deskriptor %d"
+
+#: subst.c:6213
+msgid "command substitution: ignored null byte in input"
+msgstr "substituce příkazu: nulový bajt ve vstupu ignorován"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "nelze vytvořit rouru pro substituci příkazu"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "nelze vytvořit potomka pro substituci příkazu"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute: rouru nelze zdvojit jako deskriptor 1"
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: neplatný název proměnné pro odkaz na název"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: chybná nepřímá expanze"
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr "%s: chybný název proměnné"
+
+#: subst.c:7256
+#, c-format
+msgid "%s: parameter not set"
+msgstr "%s: parametr nenastaven"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: parametr null nebo nenastaven"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: výraz podřetězce < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: chybná substituce"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: takto nelze přiřazovat"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+"budoucá verze tohoto shellu budou vynucovat vyhodnocení jako aritmetickou "
+"substituci"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "chybná substituce: v %s chybí uzavírací „`“"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "žádná shoda: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "o�ekáván argument"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: o�ekáván celo�íselný výraz"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "o�ekávána „)“"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "o�ekávána „)“, nalezeno %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: o�ekáván binární operátor"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: o�ekáván unární operátor"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "postrádám „]“"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "chyba syntaxe: neo�ekávaný „;“"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "neplatné �íslo signálu"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr ""
+"obsluha signálů: maximální úroveň zanoření obsluhy signálů byla překro�ena "
+"(%d)"
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: chybná hodnota v trap_list[%d]: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr "run_pending_traps: obsluha signálu je SIG_DFL, přeposílám %d (%s) sobě"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: chybný signál %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "chyba při importu definice „%s“"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "úroveň shellu (%d) příliš vysoká, resetuji na 1"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: žádný kontext funkce v aktuálním rozsahu"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: hodnotu nelze do proměnné přiřadit"
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr "%s: přiřazení �ísla odkazu na název"
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: žádný kontext funkce v aktuálním rozsahu"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s: má nullový exportstr"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "neplatný znak %d v exportstr pro %s"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "v exportstr pro %s chybí „=“"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr "pop_var_context: hlava shell_variables není kontextem funkce"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: chybí kontext global_variables"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr "pop_scope: hlava shell_variables není do�asným rozsahem prostředí"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: nelze otevřít jako SOUBOR"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: neplatná hodnota pro deskriptor trasovacího souboru"
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s: hodnota kompatibility je mimo rozsah"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Copyright © 2012 Free Software Foundation, Inc."
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"Licence GPLv3+: GNU GPL verze 3 nebo novější <http://gnu.org/licenses/gpl."
+"html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, verze %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr "Toto je svobodné programové vybavení: máte právo jej měnit a šířit."
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "VEŠKERÉ Z�RUKY chybí, jak jen zákon dovoluje."
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: nelze alokovat %'lu bajtů (alokováno %'lu bajtů)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: nezle alokovat %'lu bajtů"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: nelze alokovat %'lu bajtů (alokováno %'lu bajtů)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: nelze alokovat %'lu bajtů"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [název[=hodnota] …]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] název [název…]"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpsvPSVX] [-m klávmapa] [-f soubor] [-q název] [-u název] [-r "
+"klávposl] [-x klávposl:příkaz-shellu] [klávposl:readline-funkce nebo "
+"readline-příkaz]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [vestavěný-příkaz-shellu [argument…]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [výraz]"
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]] [-@]] [adresář]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] příkaz [argument…]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilnrtux] [-p] [název[=hodnota]…]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilnrtux] [-p] název[=hodnota]…"
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [přepína�] název[=hodnota]…"
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [argument…]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [argument…]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f soubor] [název…]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [argument…]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts optstring name [argument]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a název] [příkaz [argument…]] [přesměrování…]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr ""
+"fc [-e enázev] [-lnr] [první] [poslední] nebo fc -s [vzor=náhrada] [příkaz]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [úloha]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [úloha…]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p název_cesty] [-dt] [název…]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [vzorek…]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d pozice] [n] nebo history -anrw [jméno_souboru] nebo history "
+"-ps argument [argument…]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [úloha…] nebo jobs -x příkaz [argumenty]"
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [úloha… | PID…]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s sigspec | -n �íssig | -sigspec] pid | úloha… nebo kill -l [sigspec]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let argument [argument…]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a pole] [-d oddělova�] [-i text] [-n p_znaků] [-N p_znaků] [-p "
+"výzva] [-t limit] [-u fd] [jméno…]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o název_přepína�e] [--] [argument…]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [jméno…]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [název[=hodnota]…] nebo export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [název[=hodnota]…] nebo readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source název_souboru [argumenty]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". název_souboru [argumenty]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [výraz]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ argument… ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[argument] signal_spec…]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] název [název…]"
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [mód]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-fn] [id…]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [pid…]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for N�ZEV [in SLOVECH…] ; do PŘ�KAZY; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( výr1; výr2; výr3 )); do PŘ�KAZY; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select N�ZEV [in SLOVA…;] do PŘ�KAZY; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] kolona"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case SLOVO in [VZOR [| VZOR]…) PŘ�KAZY ;;]… esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if PŘ�KAZY; then PŘ�KAZY; [ elif PŘ�KAZY; then PŘ�KAZY; ]… [ else PŘ�KAZY; ] "
+"fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while P�KAZY; do P�KAZY; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until P�KAZY; do P�KAZY; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [N�ZEV] příkaz [přesměrování]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function jméno { PŘ�KAZY ; } nebo jméno () { PŘ�KAZY ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ P�KAZY ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "úloha [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( výraz ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ výraz ]]"
+
+# XXX: "variable" je literál na seznamy vestavěných příkazů
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "variables – názvy a významy některých proměnných shellu"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | adresář]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [název_volby…]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v proměnná] formát [argumenty]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o přepína�] [-A akce] [-G globvzor] "
+"[-W seznam_slov]  [-F funkce] [-C příkaz] [-X filtrvzor] [-P předpona] [-S "
+"přípona] [název…]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o přepína�] [-A akce] [-G globvzor] [-W "
+"seznam_slov]  [-F funkce] [-C příkaz] [-X filtrvzor] [-P předpona] [-S "
+"přípona] [slovo]"
+
+#: builtins.c:239
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o možnost] [-DEI] [název…]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-d oddělova�] [-n po�et] [-O po�átek] [-s po�et] [-t] [-u FD] [-C "
+"volání] [-c množství] [pole]"
+
+#: builtins.c:244
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-d oddělova�] [-n po�et] [-O po�átek] [-s po�et] [-t] [-u FD] [-C "
+"volání] [-c množství] [pole]"
+
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Definuje nebo zobrazí aliasy.\n"
+"    \n"
+"    „alias“ bez argumentů vypíše na standardní výstup seznam aliasů ve "
+"znovu\n"
+"    použitelném formátu N�ZEV=HODNOTA.\n"
+"    \n"
+"    Jinak bude definován alias pro každý N�ZEV, který má zadanou HODNOTU.\n"
+"    Závěre�ná mezera v HODNOTĚ způsobí, že při expanzi bude následující "
+"slovo\n"
+"    zkontrolováno na substituci aliasů.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -p\tvypíše všechny definované aliasy ve znovu použitelném formátu\n"
+"    \n"
+"    Návratový kód:\n"
+"    alias vrátí pravdu, pokud nebyl zadán N�ZEV, pro který není žádný alias\n"
+"    definován."
+
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Odstraní každý N�ZEV ze seznamů definovaných aliasů.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -a\todstraní všechny definice aliasů\n"
+"    Vrátí úspěch, pokud N�ZEV není neexistující alias."
+
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"Nastaví klávesové zkratky a proměnné Readline.\n"
+"    \n"
+"    Naváže posloupnost kláves na Readline funkci nebo makro nebo nastaví\n"
+"    Readline proměnnou. Syntaxe nepřepína�ových argumentů je shodná se\n"
+"    syntaxí ~/.inputrc, ale musí být zadána jako jediný argument:\n"
+"    napÅ™. bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -m  klávmapa       Použije KL�VMAPU jako klávesovou mapu pro trvání\n"
+"                         tohoto příkazu. Možné klávesové mapy jsou emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command a vi-insert.\n"
+"      -l                 Vypíše seznam názvů funkcí.\n"
+"      -P                 Vypíše seznam názvů funkcí a klávesových vazeb.\n"
+"      -p                 Vypíše seznam funkcí a klávesových vazeb ve "
+"formátu,\n"
+"                         který lze použít jako vstup.\n"
+"      -S                 Vypíše seznam posloupností kláves,\n"
+"                         které vyvolávají makra, a jejich hodnoty.\n"
+"      -s                 Vypíše seznam posloupností kláves,\n"
+"                         která vyvolávají makra, a jejich hodnoty ve "
+"formátu,\n"
+"                         který lze použít jako vstup.\n"
+"      -V                 Vypíše seznam názvů proměnných a hodnot.\n"
+"      -v                 Vypíše seznam názvů proměnných a hodnot ve "
+"formátu,\n"
+"                         který lze použít jako vstup.\n"
+"      -q  název-funkce   Dotáže se, které klávesy vyvolají zadanou funkci.\n"
+"      -u  název-funkce   Zruší všechny vazby na klávesy, které jsou "
+"napojeny\n"
+"                         na zadanou funkci.\n"
+"      -r  klávposl       Odstraní vazbu na KL�VPOSL.\n"
+"      -f  soubor         Na�te vazby kláves ze SOUBORU.\n"
+"      -x  klávposl:příkaz-shellu\n"
+"                         Způsobí, že bude vykonán PŘ�KAZ-SHELLU, když bude\n"
+"                         zadána KL�VPOSL.\n"
+"      -X                 Vypíše posloupnosti kláves a příkazy přidružené "
+"přes\n"
+"                         přepína� -x ve formátu, který lze použít jako "
+"vstup.\n"
+"    \n"
+"    Návratový kód:\n"
+"    bind vrací 0, pokud není zadán nerozpoznaný přepína� nebo nedojde "
+"k chybě."
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Ukon�í smy�ku for, whle nebo until.\n"
+"    \n"
+"    Ukon�í smy�ku FOR, WHILE nebo UNTIL. Je-li zadáno N, ukon�í N\n"
+"    obklopujících smy�ek.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Návratový kód je 0, pokud N je větší nebo rovno 1."
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Obnoví smy�ku for, while nebo until.\n"
+"    \n"
+"    Přejde k další iteraci obklopující smy�ky FOR, WHILE nebo UNTIL.\n"
+"    Je-li zadáno N, bude tak u�iněno v N. obklopující smy�ce.    \n"
+"    Návratový kód:\n"
+"    Návratový kód je 0, pokud N je větší nebo rovno 1."
+
+#: builtins.c:354
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Provede vestavěný příkaz shellu.\n"
+"    \n"
+"    Provede VESTAVĚN�-PŘ�KAZ-SHELLU s argumenty ARGUMENTY, aniž by se "
+"uplatnilo\n"
+"    vyhledávání příkazu. Toto se hodí, když si přejete reimplementovat\n"
+"    vestavěný příkaz shellu jako funkci shellu, avšak potřebujete spustit\n"
+"    vestavěný příkaz uvnitř této funkce.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrací návratový kód VESTAVĚNÉHO-PŘ�KAZU-SHELLU, nebo nepravdu, pokud\n"
+"    VESTAVĚN�-PŘ�KAZ-SHELLU není vestavěným příkazem shellu."
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Vrátí kontext aktuálního podprogramu.\n"
+"    \n"
+"    Bez V�RAZU vrátí „$řádek $název_souboru“. S V�RAZEM vrátí\n"
+"    „$řádek $podprogram $název_souboru“; tuto zvláštní informaci lze\n"
+"    využít pro výpis zásobníku volání.\n"
+"    \n"
+"    Hodnota V�RAZU ur�uje, kolik rámců volání se má zpětně projít od toho\n"
+"    sou�asného; vrcholový rámec má �íslo 0.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrací 0, pokud shell provádí shellovou funkci a V�RAZ je platný."
+
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"Změní pracovní adresář shellu.\n"
+"    \n"
+"    Změní aktuální adresář na ADR. Implicitní ADR je hodnota proměnné "
+"shellu\n"
+"    HOME.\n"
+"    \n"
+"    Proměnná CDPATH definuje vyhledávací cestu pro adresář obsahující ADR.\n"
+"    Názvy náhradních adresářů v CDPATH se oddělují dvojte�kou (:). Prázdný\n"
+"    název adresáře je stejný jako aktuální adresář. Za�íná-li ADR na "
+"lomítko\n"
+"    (/), nebude CDPATH použita.\n"
+"    \n"
+"    Nebude-li adresář nalezen a přepína� shellu „cdable_vars“ bude "
+"nastaven,\n"
+"    pak se dané slovo zkusí jakožto název proměnné. Má-li taková proměnná\n"
+"    hodnotu, pak její hodnota se použije jako ADR.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -L  vynutí následování symbolických odkazů: vyhodnotí symbolické\n"
+"          odkazy v ADR po zpracování všech výskytů „..“\n"
+"      -P  nařizuje použít fyzickou adresářovou strukturu namísto\n"
+"          následování symbolických odkazů: vyhodnotí symbolické odkazy "
+"v ADR\n"
+"          před zpracováním všech výskytů „..“\n"
+"      -e  je-li zadán přepína� -P a sou�asný pracovní adresář nelze\n"
+"          zdárně zjistit, skon�í s nenulovým návratovým kódem\n"
+"      -@  na systémech, které to podporují, vydává soubor s rozšířenými\n"
+"          atributy jako adresář obsahující atributy souboru\n"
+"    \n"
+"    Symbolické odkazy se implicitně následují, jako by bylo zadáno „-L“.\n"
+"    „..“ se zpracovávají tak, že se odstraní bezprostředně předcházející\n"
+"    �ást cesty až k lomítku nebo za�átku ADR.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrací 0, byl-li adresář změněn a, byl-li zadán -P, $PWD byla úspěšně\n"
+"    nastavena. Jinak vrací nenulovou hodnotu."
+
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"Vypíše název sou�asného pracovního adresáře.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -L  vypíše hodnotu $PWD, pokud pojmenovává sou�asný pracovní\n"
+"          adresář\n"
+"      -P  vypíše fyzický adresář prostý všech symbolických odkazů\n"
+"    \n"
+"    Implicitně se „pwd“ chová, jako by bylo zadáno „-L“.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrací 0, nebyl-li zadán neplatný přepína� a mohl-li být sou�asný\n"
+"    adresář pře�ten."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Prázdný příkaz.\n"
+"    \n"
+"    Žádný ú�inek, tento příkaz nic nedělá.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vždy uspěje."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Vrátí výsledek úspěchu.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vždy uspěje."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Vrátí výsledek neúspěchu.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vždy selže."
+
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Provede jednoduchý příkaz nebo zobrazí podrobnosti o příkazech.\n"
+"    \n"
+"    Spustí PŘ�KAZ s ARGUMENTY ignoruje funkce shellu, nebo zobrazí "
+"informace\n"
+"    o zadaných PŘ�KAZECH. Lze využít, když je třeba vyvolat příkazy "
+"z disku,\n"
+"    při�emž existuje funkce stejného jména.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -p  pro PATH bude použita implicitní hodnota, která zaru�uje,\n"
+"          že budou nalezeny všechny standardní nástroje\n"
+"      -v  zobrazí popis PŘ�KAZU podobný vestavěnému příkazu „type“\n"
+"      -V  zobrazí podrobnější popis každého PŘ�KAZU\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrací návratový kód PŘ�KAZU, nebo selže, nebyl–li příkaz nalezen."
+
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"Nastaví hodnoty a atributy proměnných.\n"
+"    \n"
+"    Deklaruje proměnné a nastaví jim atributy. Nejsou-li zadány N�ZVY,\n"
+"    zobrazí atributy a hodnoty všech proměnných.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -f  omezí akci nebo výpis na názvy funkcí a deklarace\n"
+"      -F  omezí výpis jen na názvy funkcí (a �íslo řádku a název\n"
+"          zdrojového souboru, je-li zapnuto ladění)\n"
+"      -g  vytváří globální proměnné, je-li voláno z funkce shellu,\n"
+"          jinak ignorováno\n"
+"      -p  zobrazí atributy a hodnotu každého N�ZVU\n"
+"    \n"
+"    Přepína�e, které nastavují atributy:\n"
+"      -a  u�iní N�ZVY �íslovanými poli (je-li podporováno)\n"
+"      -A  u�iní N�ZVY asociativními poli (je-li podporováno)\n"
+"      -i  přiřadí N�ZVŮM atribut „integer“ (�íslo)\n"
+"      -l  převede hodnotu každého N�ZVU na malá písmena v době přiřazení\n"
+"      -n  u�iní N�ZEV odkazem na proměnnou pojmenovanou podle své hodnoty\n"
+"      -r  u�iní N�ZVY jen pro �tení\n"
+"      -t  přiřadí N�ZVŮM atribut „trace“ (sledování)\n"
+"      -u  převede hodnotu každého N�ZVU na velká písmena v době přiřazení\n"
+"      -x  vyexportuje N�ZVY\n"
+"    \n"
+"    Pomocí „+“ namísto „-“ daný atribut vypnete.\n"
+"    \n"
+"    Proměnné s atributem integer jsou aritmeticky vyhodnoceny (vizte příkaz\n"
+"    „let“), jakmile je do proměnné přiřazeno.\n"
+"    \n"
+"    Je-li použito uvnitř funkce, u�iní „declare“ N�ZVY lokálními stejně "
+"jako\n"
+"    příkaz „local“. Přepína� „-g“ toto chování potla�í.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrací úspěch, pokud nebyl zadán neplatný přepína� a nedošlo k chybě při\n"
+"    přiřazování do proměnné."
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"Nastaví hodnoty a atributy proměnných.\n"
+"    \n"
+"    Synonymum pro „declare“. Vizte „help declare“."
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Definuje lokální proměnné.\n"
+"    \n"
+"    Vytvoří lokální proměnnou pojmenovanou N�ZEV a přiřadí jí HODNOTU. "
+"PŘEP�NAČ\n"
+"    smí být jakýkoliv přepína� přípustný u „declare“.\n"
+"    \n"
+"    Lokální proměnné lze použít jen uvnitř funkcí, budou viditelné jen "
+"v dané\n"
+"    funkci a jejich potomcích.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrací úspěch, nebyl-li zadán neplatný přepína�, nenastala-li chyba při\n"
+"    přiřazování do proměnné a vykonává-li shell funkci."
+
+#: builtins.c:557
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Vypíše své argumenty na standardní výstup.\n"
+"    \n"
+"    Zobrazí své ARGUMENTY oddělené jednou mezerou a zakon�ené novým řádkem\n"
+"    na standardní výstup.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -n  nepřipojuje nový řádek\n"
+"      -e  zapne interpretování následujících znaků uvozených zpětným "
+"lomítkem\n"
+"      -E  explicitně potla�í interpretování znaků uvozených zpětným "
+"lomítkem\n"
+"    \n"
+"    „echo“ interpretuje následující znaky uvozené zpětným lomítkem:\n"
+"      \\a  poplach (zvonek)\n"
+"      \\b  backspace\n"
+"      \\c  potla�í další výstup\n"
+"      \\e  znak escapu\n"
+"      \\E  znak escapu\n"
+"      \\f  posun formuláře (form feed)\n"
+"      \\n  nový řádek\n"
+"      \\r  návrat vozíku\n"
+"      \\t  vodorovný tabulátor\n"
+"      \\v  svislý tabulátor\n"
+"      \\\\  zpětné lomítko\n"
+"      \\0nnn  znak, jehož ASCII kód je NNN (osmi�kově). NNN smí být\n"
+"             0 až 3 osmi�kové �íslice\n"
+"      \\xHH  osmibitový znak, jehož hodnota je HH (šestnáctkově). HH smí\n"
+"            být jedna nebo dvě šestnáctkové �íslice\n"
+"      \\uHHHH  unikódový znak, jehož šestnáctková hodnota je HHHH.\n"
+"              HHHH smí být jedna až �tyři šestnáctkové �íslice\n"
+"      \\UHHHHHHHH  unikódový znak, jehož šestnáctková hodnota je HHHHHHHH.\n"
+"                  HHHHHHHH smí být jedna až osm šestnáctkových �íslic.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrací úspěch, nedojde-li k chybě zápisu na výstup."
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Vypíše argumenty na standardní výstup.\n"
+"    \n"
+"    Na standardním výstupu zobrazí ARGUMENTY následované odřádkováním.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -n\tneodřádkovává\n"
+"    \n"
+"    Vrací úspěch, nedojte-li k chybě zápisu na výstup."
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"Povoluje a zakazuje vestavěné příkazy shellu.\n"
+"    \n"
+"    Povoluje a zakazuje vestavěné příkazy shellu. Zakázání vám umožní\n"
+"    spustit program z disku, který má stejné jméno jako vestavěný příkaz\n"
+"    shellu, aniž byste museli zadávat celou cestu.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -a\tvypíše seznam vestavěných příkazů a vyzna�í, který je a který "
+"není\n"
+"    \tpovolen\n"
+"      -n\tzakáže každý N�ZEV nebo zobrazí seznam zakázaných vestavěných\n"
+"    \tpříkazů\n"
+"      -p\tvypíše seznam vestavěných příkazů ve znovu použitelné podobě\n"
+"      -s\tvypíše pouze názvy posixových „speciálních“ vestavěných příkazů\n"
+"    \n"
+"    Přepína�e řídící dynamické nahrávání:\n"
+"      -f\tZavede vestavěný příkaz N�ZEV ze sdíleného objektu N�ZEV_SOUBORU\n"
+"      -d\tOdstraní vestavění příkaz zavedený pomocí –f\n"
+"    \n"
+"    Bez přepína�ů povolí všechny N�ZVY.\n"
+"    \n"
+"    Abyste používali „test“ z $PATH namísto verze vestavěné do shellu,\n"
+"    napište „enable -n test“.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrací úspěch, je-li N�ZEV vestavěným příkazem shellu a nevyskytne-li\n"
+"    se chyba."
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Spustí argumenty jako příkaz shellu.\n"
+"    \n"
+"    ARGUMENTY slou�í do jediného řetězce, použije jej jako vstup shellu\n"
+"    a vykoná výsledné příkazy.\n"
+"    Návratový kód:\n"
+"    Vrátí návratový kód příkazu, nebo úspěch, byl-li příkaz prázdný."
+
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"Rozebere přepína�ové argumenty.\n"
+"    \n"
+"    Getopts se používá v shellových procedurách na rozebrání pozi�ních\n"
+"    parametrů jakožto přepína�ů.\n"
+"    \n"
+"    OPTSTRING obsahuje písmena přepína�ů, které mají být rozeznány, Je-li\n"
+"    písmeno následováno dvojte�kou, po přepína�i se o�ekává argument, který\n"
+"    by měl být od přepína�e oddělen bílým místem.\n"
+"    \n"
+"    Pokaždé když je getopts zavolán, je následující přepína� umístěn do\n"
+"    proměnné $name (proměnná je inicializována, neexistuje-li) a pořadí\n"
+"    dalšího argumentu, který �eká na zpracování, do proměnné shellu OPTIND.\n"
+"    OPTIND je inicializována na 1 vždy, když je zavolán shell nebo shellový\n"
+"    skript. Pokud přepína� vyžaduje argument, getopts umístí tento argument\n"
+"    do proměnné shellu OPTARG.\n"
+"    \n"
+"    getopts hlásí chyby jedním ze dvou způsobů. Pokud prvním znakem "
+"OPTSTRING\n"
+"    je dvojte�ka, getopts hlásí chyby tichým způsobem. V tomto režimu žádné\n"
+"    chybové zprávy nejsou vypisovány. Když se narazí na neplatný přepína�,\n"
+"    getopts umístí tento znak do OPTARG. Pokud není nalezen povinný "
+"argument,\n"
+"    getopts umístí „:“ do NAME a OPTARG nastaví na znak nalezeného "
+"přepína�e.\n"
+"    Pokud getopts nepracuje v tomto tichém režimu a je nalezen neplatný\n"
+"    přepína�, getopts umístí „?“ do NAME a zruší OPTARG. Když nenajde "
+"povinný\n"
+"    argument, je do NAME zapsán „?“, OPTARG zrušen a vytištěna diagnostická\n"
+"    zpráva.\n"
+"    \n"
+"    Pokud proměnná shellu OPTERR má hodnotu 0, getopts vypne vypisování\n"
+"    chybových zpráv, dokonce i když první znak OPTSTRING není dvojte�ka.\n"
+"    Implicitní hodnota OPTERR je 1.\n"
+"    \n"
+"    Normálně getopts zpracovává pozi�ní parametry ($0–$9), avšak následuje-"
+"li\n"
+"    getopts více argumentů, budou rozebrány tyto namísto pozi�ních.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí úspěch, byl-li nalezen nějaký přepína�. Neúspěch vrátí, když "
+"dojde\n"
+"    na konec přepína�ů nebo nastane-li chyba."
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"Nahradí shell zadaným příkazem.\n"
+"    \n"
+"    Vykoná PŘ�KAZ, při�emž nahradí tento shell zadaným programem.  "
+"ARGUMENTY\n"
+"    se stanou argumenty PŘ�KAZU. Není-li PŘ�KAZ zadán, přesměrování "
+"zapůsobí\n"
+"    v tomto shellu.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -a název  předá název jakožto nultý argument PŘ�KAZU\n"
+"      -c        spustí PŘ�KAZ s prázdným prostředím\n"
+"      -t        do nultého argumentu PŘ�KAZU umístí poml�ku\n"
+"    \n"
+"    Pokud příkaz nemůže být proveden, neinteraktivní shell bude ukon�en,\n"
+"    pokud přepína� shellu „execfail“ není nastaven.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí úspěch, pokud byl PŘ�KAZ nalezen a nedošlo k chybě přesměrování."
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Ukon�í shell.\n"
+"    \n"
+"    Ukon�í tento shell se stavem N. Bez N bude návratový kód roven kódu\n"
+"    posledně prováděného příkazu."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Ukon�í přihlašovací shell.\n"
+"    \n"
+"    Ukon�í přihlašovací (login) shell se stavem N. Nebyl-li příkaz zavolán\n"
+"    z přihlašovacího shellu, vrátí chybu."
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"Zobrazí nebo vykoná příkazy ze seznamu historie.\n"
+"    \n"
+"    fc se používá na vypsání, úpravu a znovu provedení příkazů ze seznamu\n"
+"    historie. PRVN� a POSLEDN� mohou být �ísla ur�ující rozsah nebo PRVN� "
+"může být\n"
+"    řetězec, což ur�uje nejnovější příkaz za�ínající na zadaný řetězec.\n"
+"    \n"
+"    Přepína�e:\n"
+"       -e EN�ZEV\tvybere editor. Implicitní je FCEDIT, pak EDITOR, pak vi.\n"
+"       -l\tvypisuje řádky namísto jejich upravování\n"
+"       -n\tvypne �íslování řádků při jejich vypisování\n"
+"       -r\tobrátí pořadí řádků (nejnovější budou první)\n"
+"    \n"
+"    Forma příkazu „fc -s [vzor=náhrada… [příkaz]“ znamená, že PŘ�KAZ bude\n"
+"    po nahrazení STAR�=NOV� znovu vykonán.\n"
+"    \n"
+"    Užite�ný alias je r='fc -s', takže napsání „r cc“ spustí poslední "
+"příkaz\n"
+"    za�ínající na „cc“ a zadání „r“ znovu spustí poslední příkaz.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí úspěch nebo kód provedeného příkazu. Nenulový kód, vyskytne-li se\n"
+"    chyba."
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Přepne úlohu na popředí.\n"
+"    \n"
+"    Přesune úlohu ur�enou pomocí ÚLOHA na popředí a u�iní ji aktuální "
+"úlohou.\n"
+"    Není-li ÚLOHA zadána, použije se úloha, o které si shell myslí, že je\n"
+"    aktuální.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Kód úlohy přesunuté do popředí, nebo došlo-li k chybě, kód selhání."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Přesune úlohy do pozadí.\n"
+"    \n"
+"    Přepne každou úlohu ur�enou pomocí ÚLOHA na pozadí, jako by byla\n"
+"    spuštěna s „&“. Ne-li ÚLOHA uvedena, použije se úloha, o které si shell\n"
+"    myslí, že je aktuální.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí úspěch, pokud je správa úloh zapnuta a nedošlo-li k nějaké chybě."
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"Zapamatuje si nebo zobrazí umístění programu.\n"
+"    \n"
+"    Pro každý N�ZEV je ur�ena plná cesta k příkazu a je zapamatována. Nejsou-"
+"li\n"
+"    zadány žádné argumenty, budou vypsány informace o zapamatovaných "
+"příkazech.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -d        zapomene zapamatovaná umístění každého N�ZVU\n"
+"      -l        vypíše v takové podobě, kterou lze opět použít jako vstup\n"
+"      -p cesta  použije N�ZEV_CESTY jako plnou cestu k N�ZVU\n"
+"      -r        zapomene všechna zapamatovaná umístění\n"
+"      -t        vypíše zapamatované umístění každého N�ZVU a každému "
+"umístění\n"
+"                předepíše odpovídající N�ZEV, bylo zadáno více N�ZVŮ\n"
+"    Argumenty:\n"
+"      N�ZEV     Každý N�ZEV je vyhledán v $PATH a přidán do seznamu\n"
+"                zapamatovaných příkazů.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí úspěch, pokud byl N�ZEV nalezen a nebyl-li zadán neplatný přepína�."
+
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Zobrazí podrobnosti o vestavěných příkazech.\n"
+"    \n"
+"    Zobrazí stru�ný souhrn vestavěných příkazů. Je-li zadán VZOREK,\n"
+"    vrátí podrobnou nápovědu ke všem příkazům odpovídajícím VZORKU, jinak "
+"je\n"
+"    vytištěn seznam syntaxe vestavěných příkazů.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -d  vypíše krátké pojednání na každé téma\n"
+"      -m  zobrazí použití v jakoby manuálovém formátu\n"
+"      -s  vypíše pouze krátký popis použití o každém příkazu odpovídajícímu\n"
+"          VZORKU\n"
+"    \n"
+"    Argumenty:\n"
+"      VZOREK  Vzorek ur�ující téma nápovědy\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrací úspěch, pokud byl nalezen VZOREK a nebyl zadán neplatný přepína�."
+
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Zobrazí nebo upraví seznam historie.\n"
+"    \n"
+"    Zobrazí seznam historie s o�íslovanými řádky. Řádky vypsané s „*“ byly\n"
+"    změněny. Argument N říká, že se vypíše pouze posledních N řádek.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -c  vyprázdní seznam historie smazáním všech položek\n"
+"      -d pozice  smaže položku ze seznamu historie na pozici POZICE. "
+"Záporné\n"
+"          pozice se po�ítají od konce seznamu historie.\n"
+"    \n"
+"      -a  připojí řádky historie z této relace do souboru historie\n"
+"      -n  na�te všechny řádky historie, které ještě nebyly na�teny,\n"
+"          ze souboru historie a připojí je do seznamu historie\n"
+"      -r  na�te soubor historie a obsah připojí do seznamu historie\n"
+"      -w  zapíše sou�asnou historii do souboru historie\n"
+"    \n"
+"      -p  provede expanzi historie na každém ARGUMENTU a výsledek zobrazí,\n"
+"          aniž by cokoliv uložil do seznamu historie\n"
+"      -s  připojí ARGUMENTY do seznamu historie jako jednu položku\n"
+"    \n"
+"    Je-li zadán JMÉNO_SOUBORU, tak ten je použit jako soubor historie. "
+"Jinak\n"
+"    pokud $HISTFILE má hodnotu, tato je použita, jinak ~/.bash_history.\n"
+"    \n"
+"    Je-li proměnná $HISTTIMEFORMAT nastavena a není-li prázdná, její "
+"hodnota\n"
+"    se použije jako formátovací řetězec pro strftime(3) při výpisu �asových\n"
+"    razítek spojených s každou položkou historie. Jinak žádná �asová "
+"razítka\n"
+"    nebudou vypisována.    \n"
+"    Návratový kód:\n"
+"    Vrátí úspěch, pokud nebyl zadán neplatný přepína� a nedošlo k chybě."
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"Zobrazí stav úloh.\n"
+"    \n"
+"    Vypíše aktivní úlohy. ÚLOHA omezuje výstup na danou úlohu. Bez uvedení\n"
+"    přepína�ů bude vypsán stav všech aktivních úloh.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -l  vypíše navíc ID procesů\n"
+"      -n  vypíše pouze procesy, které od minulého oznámení změnily stav\n"
+"      -p  vypíše pouze ID procesů\n"
+"      -r  zúží výstup jen na běžící úlohy\n"
+"      -s  zúží výstup jen na pozastavené úlohy\n"
+"    \n"
+"    Je-li použito -x, bude spuštěn příkaz, jakmile všechny úlohy uvedené "
+"mezi\n"
+"    ARGUMENTY budou nahrazeny ID procesu, který je vedoucím skupiny dané "
+"úlohy.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí úspěch, pokud nebyl zadán neplatný přepína� a nevyskytla se "
+"chyba.\n"
+"    Byl-ly použit přepína� -x, vrátí návratový kód PŘ�KAZU."
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"Odstraní úlohy ze sou�asného shellu.\n"
+"    \n"
+"    Z tabulky aktivních úloh odebere každou ÚLOHU. Nebudou-li ÚLOHY zadány,\n"
+"    shell použije vlastní představu o sou�asné úloze.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -a  odstraní všechny úlohy, pokud nebyla žádná ÚLOHA ur�ena\n"
+"      -h  ozna�í každou ÚLOHU tak, že jí nebude zaslán SIGHUP, až shell sám\n"
+"          obdrží tento signál\n"
+"      -r  odstraní jen běžící úlohy\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí úspěch, pokud nebyl zadán neplatný přepína� nebo ÚLOHA."
+
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Zašle signál úloze.\n"
+"    \n"
+"    Zašle procesu ur�eném PID (nebo ÚLOHOU) signál zadaný pomocí SIGSPEC\n"
+"    nebo Č�SSIG. Není-li SIGSPEC ani Č�SSIG zadán, pak se předpokládá "
+"SIGTERM.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -s sig  SIG je název signálu\n"
+"      -n sig  SIG je �íslo signálu\n"
+"      -l      vypíše �ísla signálů; pokud „-l“ následují argumenty, má\n"
+"              se za to, že se jedná o �ísla signálů, pro které se mají "
+"vyspat\n"
+"              jejich názvy.\n"
+"      -L      synonymum pro -l\n"
+"    \n"
+"    Kill je vestavěný příkaz shellu ze dvou důvodů: umožňuje použít\n"
+"    identifikátory úloh namísto ID procesů a umožní zabíjet procesy i poté,\n"
+"    co jste dosáhli limitu po�tu procesů, které smíte vytvořit.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí úspěch, pokud nebyl zadán neplatný přepína� a nedošlo k chybě."
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"Vyhodnotí aritmetický výraz.\n"
+"    \n"
+"    Vyhodnotí každý ARGUMENT jako aritmetický výraz. Vyhodnocení je\n"
+"    prováděno v celých �íslech o pevné šířce bez kontrol přete�ení, avšak\n"
+"    dělení 0 je zachyceno a ozna�eno za chybu. Následující seznam operátorů\n"
+"    je rozdělen do skupin podle úrovní přednosti. Skupiny jsou seřazeny\n"
+"    v sestupném pořadí přednosti.\n"
+"    \n"
+"    \tid++, id--\tnásledné zvýšení, snížení proměnné\n"
+"    \t++id, --id\tpřednostní zvýšení, snížení proměnné\n"
+"    \t-, +\t\tunární mínus, plus\n"
+"    \t!, ~\t\tlogická a bitová negace\n"
+"    \t**\t\tumocnění\n"
+"    \t*, /, %\t\tnásobení, dělení, zbytková třída\n"
+"    \t+, -\t\ts�ítání, ode�ítání\n"
+"    \t<<, >>\t\tlevý a pravý bitový posun\n"
+"    \t<=, >=, <, >\tporovnání\n"
+"    \t==, !=\t\trovnost, nerovnost\n"
+"    \t&\t\tbitové a zároveň (AND)\n"
+"    \t^\t\tbitové vylu�ující nebo (XOR)\n"
+"    \t|\t\tbitové nebo (OR)\n"
+"    \t&&\t\tlogické a zároveň (AND)\n"
+"    \t||\t\tlogické nebo (OR)\n"
+"    \tV�RAZ ? V�RAZ : V�RAZ\n"
+"    \t\t\tpodmíněný operátor\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tpřiřazení\n"
+"    \n"
+"    Proměnné shellu jsou povolené operandy. Název proměnné je uvnitř výrazu\n"
+"    nahrazen její hodnotou (s automatickým převodem na celé �íslo pevné "
+"šířky).\n"
+"    Proměnná nemusí mít atribut integer (�íslo) zapnutý, aby byla "
+"použitelná\n"
+"    ve výrazu.\n"
+"    \n"
+"    Operátory se vyhodnocují v pořadí přednosti. Podvýrazy v závorkách jsou\n"
+"    vyhodnoceny přednostně a smí přebít pravidla přednosti uvedená výše.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Pokud poslední ARGUMENT je vyhodnocen na 0, let vrátí 1. Jinak je\n"
+"    navrácena 0."
+
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"Na�te ze standardního vstupu jeden řádek a rozdělí jej na položky.\n"
+"    \n"
+"    Ze standardního vstupu, nebo deskriptoru souboru FD, je-li zadán\n"
+"    přepína� -u, je na�ten jeden řádek. Řádek se rozdělí na �ásti jako při\n"
+"    dělení na slova a první slovo je přiřazeno do prvního JMÉNA, druhé "
+"slovo\n"
+"    do druhého JMÉNA a tak dále, při�emž přebývající slova se přiřadí do\n"
+"    posledního JMÉNA. Pouze znaky uvedené v $IFS jsou považovány za\n"
+"    oddělova�e slov.\n"
+"    \n"
+"    Nejsou-li uvedena žádná JMÉNA, na�tený řádek bude uložen do proměnné "
+"REPLY.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -a pole       na�tená slova budou přiřazena do postupných prvků POLE\n"
+"                    po�ínaje indexem nula\n"
+"      -d oddělova�  pokra�uje, dokud není na�ten první znak ODDĚLOVAČE\n"
+"                    namísto nového řádku\n"
+"      -e            na�te řádek pomocí knihovny Readline\n"
+"      -i text       použije TEXT jako prvotní text pro Readline\n"
+"      -n p_znaků    vrátí řízení po na�tení P_ZNAKŮ znaků, místo �ekání na\n"
+"                    nový řádek, avšak respektuje oddělova�, je-li méně než\n"
+"                    P_ZNAKÅ®\n"
+"      -N p_znaků    vrátí řízení pouze po na�tení přesně P_ZNAKŮ znaků,\n"
+"                    pokud se neobjeví konec souboru nebo nevyprší limit,\n"
+"                    ignoruje jakýkoliv oddělova�\n"
+"      -p výzva      vypíše řetězec V�ZVA bez závěre�ného nového řádku "
+"dříve,\n"
+"                    než se zahájí na�ítání\n"
+"      -r            nepovolí zpětná lomítka pro escapování jakýchkoliv "
+"znaků\n"
+"      -s            vstup pocházející z terminálu nebude zobrazován\n"
+"      -t limit      umožní vypršení �asového limitu a vrácení chyby, pokud\n"
+"                    nebude na�ten celý řádek do LIMIT sekund. Hodnota "
+"proměnné\n"
+"                    TMOUT představuje implicitní limit. LIMIT smí být "
+"desetinné\n"
+"                    �íslo. Je-li LIMIT 0, read okamžitě skon�í, aniž by "
+"zkusil\n"
+"                    na�íst jakákoliv data, a vrátí úspěch, jen bude-li na\n"
+"                    zadaném deskriptoru souboru připraven vstup. Návratový\n"
+"                    kód bude větší než 128, pokud �asový limit bude "
+"překro�en.\n"
+"      -u fd         �te z deskriptoru souboru FD namísto standardního "
+"vstupu\n"
+"    \n"
+"    Návratový kód:\n"
+"    Návratový kód je nula, pokud se nenarazí na konec souboru, �asový limit\n"
+"    pro �tení nevyprší (pak je větší než 128), nedojde k chybě při\n"
+"    přiřazování do proměnné, nebo není poskytnut neplatný deskriptor "
+"souboru\n"
+"    jako argument -u."
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"Návrat z shellové funkce.\n"
+"    \n"
+"    Způsobí ukon�ení funkce nebo skriptu na�teného přes „source“ "
+"s návratovou\n"
+"    hodnotou ur�enou N. Je-li N vynecháno, návratový kód bude roven "
+"poslednímu\n"
+"    příkazu vykonanému uvnitř doty�né funkce nebo skriptu.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vrátí N, nebo selže, pokud shell neprovádí funkci nebo skript."
+
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"Nastaví nebo zruší hodnoty přepína�ů shellu a pozi�ních parametrů.\n"
+"    \n"
+"    Změní hodnoty atributům shellu a pozi�ním parametrům, nebo zobrazí "
+"názvy\n"
+"    a hodnoty proměnných shellu.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -a  Ozna�í měněné nebo vytvářené proměnné pro export.\n"
+"      -b  Neprodleně oznámí ukon�ení úlohy.\n"
+"      -e  Neprodleně skon�í, pokud nějaký příkaz skon�í s nenulovým kódem.\n"
+"      -f  Zakáže vytváření jmen souborů (globbing).\n"
+"      -h  Zapamatuje si umístění příkazů tehdy, když jsou vyhledány.\n"
+"      -k  Všechny přiřazovací argumenty budou umístěny do prostředí\n"
+"          příkazu. Nejenom ty, co předchází název příkazu.\n"
+"      -m  Správa úloh je zapnuta.\n"
+"      -n  Příkazy na�te, ale neprovede je.\n"
+"      -o N�ZEV_PŘEP�NAČE\n"
+"          Nastaví proměnnou odpovídající N�ZVU_PŘEP�NAČE:\n"
+"              allexport    stejné jako -a\n"
+"              braceexpand  stejné jako -B\n"
+"              emacs        použije emacsový způsob editace na řádku\n"
+"              errexit      stejné jako -e\n"
+"              errtrace     stejné jako -E\n"
+"              functrace    stejné jako -T\n"
+"              hashall      stejné jako -h\n"
+"              histexpand   stejné jako -H\n"
+"              history      zapne historii příkazů\n"
+"              ignoreeof    shell neskon�í, když na�te EOF (konec souboru)\n"
+"              interactive-comments\n"
+"                           povolí, aby se v interaktivních příkazech\n"
+"                           objevovaly komentáře\n"
+"              keyword      stejné jako -k\n"
+"              monitor      stejné jako -m\n"
+"              noclobber    stejné jako -C\n"
+"              noexec       stejné jako -n\n"
+"              noglob       stejné jako -f\n"
+"              nolog        v sou�asnosti přijímáno, ale ignorováno\n"
+"              notify       stejné jako -b\n"
+"              nounset      stejné jako -u\n"
+"              onecmd       stejné jako -t\n"
+"              physical     stejné jako -P\n"
+"              pipefail     návratová hodnota kolony je status posledního\n"
+"                           příkazu, který skon�il s nenulovým kódem.\n"
+"                           Návratová hodnota je nula, pokud žádný z příkazů\n"
+"                           neskon�il s nenulovým kódem.\n"
+"              posix        změní chování bashe tam, kde implicitní chování\n"
+"                           se liší od standardu 1003.2, tak, aby bylo\n"
+"                           v souladu se standardem\n"
+"              privileged   stejné jako -p\n"
+"              verbose      stejné jako -v\n"
+"              vi           použije vi způsob editace na řádku\n"
+"              xtrace       stejné jako -x\n"
+"      -p  Zapnuto, kdykoliv reálné a efektivní ID uživatele se neshodují.\n"
+"          Vypne zpracování souboru $ENV a importování shellových funkcí.\n"
+"          Vypnutí tohoto přepína�e způsobí, že efektivní UID a GID budou\n"
+"          nastavena na reálná UID a GID.\n"
+"      -t  Skon�í po na�tení a provedení jednoho příkazu.\n"
+"      -u  Při substituci považuje nenastavené proměnné za chybu.\n"
+"      -v  Vstupní řádky shellu se budou vypisovat tak, jak budou na�ítány.\n"
+"      -x  Vypisuje příkazy a jejich argumenty tak, jak jsou spouštěny.\n"
+"      -B  Shell bude provádět závorkovou (brace) expanzi.\n"
+"      -C  Je-li nastaveno, zakáže přepsání již existujících běžných souborů\n"
+"          při přesměrování výstupu.\n"
+"      -E  Je-li nastaveno, trap ERR (zachytávání chyb) bude děděn do\n"
+"          funkcí shellu.\n"
+"      -H  Zapne ! způsob nahrazování historie. Tento příznak je automaticky\n"
+"          zapnut při interaktivním shellu.\n"
+"      -P  Je-li nastaveno, nebudou vyhodnocovány symbolické odkazy při\n"
+"          provádění příkazů jako změna pracovního adresáře pomocí „cd“.\n"
+"      -T  Je-li nastaveno, trap DEBUG (obsluha ladění) a RETURN (návrat\n"
+"          z podprogramu) bude děděn do funkcí shellu.\n"
+"      --  Přiřadí jakékoliv zbývající argumenty do pozi�ních parametrů.\n"
+"          Neexistují-li žádné zbývající argumenty, pozi�ní parametry budou\n"
+"          odstraněny.\n"
+"      -   Přiřadí jakékoliv zbývající argumenty do pozi�ních parametrů.\n"
+"          Přepína�e -x a -v budou vypnuty.\n"
+"    \n"
+"    Použití + místo - způsobí, že tyto příznaky budou vypnuty. Příznaky lze "
+"též\n"
+"    použít při volání shellu. Aktuální množinu příznaků je možno nalézt "
+"v $-.\n"
+"    Přebývajících n ARGUMENTŮ jsou pozi�ní parametry a budou přiřazeny,\n"
+"    v pořadí, do $1, $2, … $n. Nejsou-li zadány žádné ARGUMENTY, budou\n"
+"    vytištěny všechny proměnné shellu.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí úspěch, pokud nebyl zadán neplatný argument."
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"Odstraňuje hodnoty a atributy proměnných a funkcí shellu.\n"
+"    \n"
+"    Pro každé JMÉNO odstraní odpovídající proměnnou nebo funkci.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -f  považuje každé JMÉNO za funkci shellu\n"
+"      -v  považuje každé JMÉNO za proměnnou shellu\n"
+"      -n  považuje každé JMÉNO za odkaz na název a odstraní proměnnou samu\n"
+"          namísto proměnné, na kterou odkazuje\n"
+"    \n"
+"    Bez těchto dvou příznaků unset nejprve zkusí zrušit proměnnou a pokud "
+"toto\n"
+"    selže, tak zkusí zrušit funkci.\n"
+"    \n"
+"    Některé proměnné nelze odstranit. Vizte příkaz „readonly“.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí úspěch, pokud nebyl zadán neplatný přepína� a JMÉNO není jen pro\n"
+"    �tení."
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Nastaví atribut exportovat proměnné shellu.\n"
+"    \n"
+"    Každý N�ZEV je ozna�en pro automatické exportování do prostředí "
+"následně\n"
+"    prováděných příkazů. Je-li zadána HODNOTA, před exportem přiřadí "
+"HODNOTU.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -f\tvztahuje se na funkce shellu\n"
+"      -n\todstraní vlastnost exportovat každému N�ZVU\n"
+"      -p\tzobrazí seznam všech exportovaných proměnných a funkcí\n"
+"    \n"
+"    Argument „--“ zakazuje zpracování dalších přepína�ů.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí úspěch, pokud nebyl zadán neplatný přepína� nebo N�ZEV."
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Ozna�í proměnné shellu za nezměnitelné.\n"
+"    \n"
+"    Ozna�í každý N�ZEV jako jen pro �tení, hodnoty těchto N�ZVŮ nebude "
+"možné\n"
+"    změnit následným přiřazením. Je-li zadána HODNOTA, před ozna�ením za "
+"jen\n"
+"    pro �tení přiřadí HODNOTU.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -a  vztahuje se na proměnné typu �íslované pole\n"
+"      -A  vztahuje se na proměnné typu asociativní pole\n"
+"      -f  vztahuje se funkce shellu\n"
+"      -p  zobrazí seznam všech proměnných nebo funkcí jen pro �tení\n"
+"          v závislosti podle toho, zda-li byl zadán přepína� -f\n"
+"    \n"
+"    Argument „--“ zakáže zpracování dalších přepína�ů.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí úspěch, pokud nebyl zadán neplatný přepína� nebo N�ZEV."
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"Posune pozi�ní parametry.\n"
+"    \n"
+"    Přejmenuje pozi�ní parametry $N+1, $N+2, … na $1, $2, …\n"
+"    Není-li zadáno N, předpokládá se 1.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí úspěch, pokud N není záporný a není větší než $#."
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Vykoná příkazy obsažené ze souboru v sou�asném shellu.\n"
+"    \n"
+"    Na�te a provede příkazy z N�ZEV_SOUBORU v tomto shellu. Položky v $PATH\n"
+"    jsou použity pro nalezení adresáře obsahujícího N�ZEV_SOUBORU. Jsou-li\n"
+"    zadány nějaké ARGUMENTY, stanou se pozi�ními parametry při běhu\n"
+"    N�ZVU_SOUBORU.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrací návratový kód posledního provedeného příkazu z N�ZVU_SOUBORU.\n"
+"    Selže, pokud N�ZEV_SOUBORU nelze na�íst."
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Pozastaví běh shellu.\n"
+"    \n"
+"    Pozastaví provádění tohoto shellu do doby, něž bude obdržen signál\n"
+"    SIGCONT. Není-li vynuceno, přihlašovací shell nelze pozastavit.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -f\tvynutí pozastavení, i když se jedná o přihlašovací (login) shellu\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrací úspěch, pokud je správa úloh zapnuta a nevyskytla se chyba."
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"Vyhodnotí podmínkový výraz.\n"
+"    \n"
+"    Skon�í s kódem 0 (pravda) nebo 1 (nepravda) podle vyhodnocení V�RAZU.\n"
+"    Výraz smí být unární nebo binární. Unární výrazy se �asto používají pro\n"
+"    zjištění stavu souboru. Rovněž jsou k dispozici řetězcové operátory a\n"
+"    operátory �íselného porovnání.\n"
+"    \n"
+"    Chování testu závisí na po�tu argumentů. Úplnou specifikaci si lze\n"
+"    pře�íst v manuálové stránce bashe.\n"
+"    \n"
+"    Souborové operátory:\n"
+"    \n"
+"      -a SOUBOR      Pravda, pokud soubor existuje.\n"
+"      -b SOUBOR      Pravda, pokud soubor je blokovým zařízením.\n"
+"      -c SOUBOR      Pravda, pokud soubor je znakovým zařízením.\n"
+"      -d SOUBOR      Pravda, pokud soubor je adresářem.\n"
+"      -e SOUBOR      Pravda, pokud soubor existuje.\n"
+"      -f SOUBOR      Pravda, pokud soubor existuje a je to běžný soubor.\n"
+"      -g SOUBOR      Pravda, pokud soubor je SGID.\n"
+"      -h SOUBOR      Pravda, pokud soubor je symbolickým odkazem.\n"
+"      -L SOUBOR      Pravda, pokud soubor je symbolickým odkazem.\n"
+"      -k SOUBOR      Pravda, pokud soubor má nastavený „sticky“ bit.\n"
+"      -p SOUBOR      Pravda, pokud soubor je pojmenovanou rourou.\n"
+"      -r SOUBOR      Pravda, pokud soubor je vámi �itelný.\n"
+"      -s SOUBOR      Pravda, pokud soubor existuje a je neprázdný.\n"
+"      -S SOUBOR      Pravda, pokud soubor je socketem.\n"
+"      -t FD          Pravda, pokud FD (deskriptor souboru) je otevřený na\n"
+"                     terminálu.\n"
+"      -u SOUBOR      Pravda, pokud soubor je SUID.\n"
+"      -w SOUBOR      Pravda, pokud soubor je vámi zapisovatelný.\n"
+"      -x SOUBOR      Pravda, pokud soubor je vámi spustitelný.\n"
+"      -O SOUBOR      Pravda, pokud soubor je vámi efektivně vlastněn.\n"
+"      -G SOUBOR      Pravda, pokud soubor je efektivně vlastněn vaší\n"
+"                     skupinou.\n"
+"      -N SOUBOR      Pravda, pokud soubor byl změněn po posledním �tení.\n"
+"    \n"
+"      SOUBOR1 -nt SOUBOR2\n"
+"                     Pravda, pokud je SOUBOR1 novější než SOUBOR2 (podle "
+"�asu\n"
+"                     změny obsahu).\n"
+"    \n"
+"      SOUBOR1 -ot SOUBOR2\n"
+"                     Pravda, pokud SOUBOR1 je starší než SOUBOR2.\n"
+"    \n"
+"      SOUBOR1 -ef SOUBOR2\n"
+"                     Pravda, pokud SOUBOR1 je pevným odkazem na SOUBOR2.\n"
+"    \n"
+"    Řetězcové operátory:\n"
+"    \n"
+"      -z ŘETĚZEC     Pravda, pokud ŘETĚZEC je prázdný.\n"
+"    \n"
+"      -n ŘETĚZEC\n"
+"         ŘETĚZEC     Pravda, pokud ŘETĚZEC není prázdný.\n"
+"    \n"
+"      ŘETĚZEC1 = ŘETĚZEC2\n"
+"                     Pravda, pokud jsou řetězce shodné.\n"
+"      ŘETĚZEC1 != ŘETĚZEC2\n"
+"                     Pravda, pokud se řetězce neshodují.\n"
+"      ŘETĚZEC1 < ŘETĚZEC2\n"
+"                     Pravda, pokud se ŘETĚZEC1 řadí lexikograficky před\n"
+"                     ŘETĚZEC2.\n"
+"      ŘETĚZEC1 > ŘETĚZEC2\n"
+"                     Pravda, pokud se ŘETĚZEC1 řadí lexikograficky za\n"
+"                     ŘETĚZEC2.\n"
+"    \n"
+"    Další operátory:\n"
+"    \n"
+"      -o PŘEP�NAČ    Pravda, pokud je přepína� shellu PŘEP�NAČ zapnut.\n"
+"      -v PROMĚNN�    Pravda, pokud je proměnná shellu PROMĚNN� nastavena\n"
+"      -R PROMĚNN�    Pravda, pokud je proměnná shellu PROMĚNN� nastavena a\n"
+"                     jedná se odkaz na název.\n"
+"      ! V�RAZ        Pravda, pokud je V�RAZ nepravdivý.\n"
+"      V�RAZ1 -a V�RAZ2\n"
+"                     Pravda, pokud oba V�RAZ1 I V�RAZ2 jsou pravdivé.\n"
+"      V�RAZ1 -o V�RAZ2\n"
+"                     Pravda, pokud V�RAZ1 NEBO V�RAZ2 je pravdivý.\n"
+"    \n"
+"      ARGUMENT1 OP ARGUMENT2\n"
+"                     Aritmetické testy. OP je jeden z -eq, -ne, -lt,\n"
+"                     -le, -gt nebo -ge.\n"
+"    \n"
+"    Aritmetické binární operátory vracejí pravdu, pokud ARGUMENT1 je roven,\n"
+"    neroven, menší než, menší než nebo roven, větší než, větší než nebo\n"
+"    roven ARGUMENTU2.    \n"
+"    Návratový kód:\n"
+"    Vrací úspěch, je-li V�RAZ vyhodnocen jako pravdivý. Selže, je-li V�RAZ\n"
+"    vyhodnocen jako nepravdivý nebo je-li zadán neplatný argument."
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Vyhodnotí podmínkový výraz.\n"
+"    \n"
+"    Toto je synonymum pro vestavěný příkaz „test“, až na to, že poslední\n"
+"    argument musí být doslovně „]“, aby se shodoval s otevírající „[“."
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Zobrazí �asy procesu.\n"
+"    \n"
+"    Vypíše celkovou dobu procesu shellu a všech jeho potomků, kterou "
+"strávili\n"
+"    v uživatelském a jaderném (system) prostoru.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vždy uspěje."
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"Zachytávání signálů a jiných událostí.\n"
+"    \n"
+"    Definuje a aktivuje obsluhy, které budou spuštěny, když shell obdrží\n"
+"    signály nebo nastanou ur�ité podmínky.\n"
+"    \n"
+"    Příkaz ARGUMENT bude na�ten a proveden, až shell obdrží signál(y)\n"
+"    SIGNAL_SPEC. Pokud ARGUMENT chybí (a je zadán jeden SIGNAL_SPEC) nebo "
+"je\n"
+"    „-“, každý ur�ený signál bude přenastaven zpět na svoji původní "
+"hodnotu.\n"
+"    Je-li ARGUMENT prázdný řetězec, každý SIGNAL_SPEC bude shellem a "
+"příkazy\n"
+"    z něj spuštěnými ignorován.\n"
+"    \n"
+"    Je-li SIGNAL_SPEC „EXIT (0)“, bude ARGUMENT proveden při ukon�ování "
+"tohoto\n"
+"    shellu. Je-li SIGNAL_SPEC „DEBUG“, bude ARGUMENT proveden před každým\n"
+"    jednoduchým příkazem. Je-li SIGNAL_SPEC „RETURN“, bude ARGUMENT "
+"proveden\n"
+"    vždy, když skon�í běh funkce shellu nebo skriptu spuštěného přes\n"
+"    vestavěný příkaz „.“ nebo „source“. SIGNAL_SPEC „ERR“ znamená, že\n"
+"    ARGUMENT bude proveden pokaždé, když by selhání příkazu způsobilo\n"
+"    ukon�ení shellu (je-li zapnut přepína� -e).\n"
+"    \n"
+"    Nejsou-li poskytnuty žádné argumenty, trap vypíše seznam příkazů "
+"navázaných\n"
+"    na všechny signály.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -l\tvypíše seznam jmen signálů a jim odpovídajících �ísel\n"
+"      -p\tzobrazí příkazy navázané na každý SIGNAL_SPEC\n"
+"    \n"
+"    Každý SIGNAL_SPEC je bu�to jméno signálu ze <signal.h>, nebo �íslo "
+"signálu.\n"
+"    U jmen signálů nezáleží na velikosti písmen a předpona SIG je "
+"nepovinná.\n"
+"    Aktuálnímu shellu lze zaslat signál pomocí „kill -signal $$“.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí úspěch, pokud SIGSPEC a zadané přepína�e jsou platné."
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"Zobrazí informace o typu příkazu.\n"
+"    \n"
+"    O každém N�ZVU řekne, jak by byl interpretován, kdyby byl použit jako\n"
+"    název příkazu.\n"
+"    \n"
+"    Přepína�e\n"
+"      -a  zobrazí všechna místa, kde se nalézá spustitelný program\n"
+"          pojmenovaný N�ZEV. To zahrnuje aliasy, vestavěné příkazy a funkce\n"
+"          jen a pouze tehdy, když není rovněž použit přepína� -p.\n"
+"      -f  potla�í hledání mezi funkcemi shellu\n"
+"      -P  vynutí prohledání PATH na každý N�ZEV, dokonce i když se\n"
+"          jedná o alias, vestavěný příkaz nebo funkci, a vrátí název\n"
+"          souboru na disku, který by byl spuštěn\n"
+"      -p  bu� vrátí jméno souboru na disku, který by byl spuštěn,\n"
+"          nebo nic, pokud „type -t N�ZEV“ by nevrátil „file“ (soubor)\n"
+"      -t  vypíše jedno slovo z těchto: „alias“, „keyword“, „function“,\n"
+"          „builtin“, „file“ nebo „“, je-li N�ZEV alias, klí�ové slovo\n"
+"          shellu, shellová funkce, vestavěný příkaz shellu, soubor na\n"
+"          disku nebo nenalezený příkaz\n"
+"    \n"
+"    Argumenty:\n"
+"      N�ZEV  Název příkazu ur�ený k výkladu.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí úspěch, pokud všechny N�ZVY byly nalezeny. Selže, pokud některé\n"
+"    nalezeny nebyly."
+
+#: builtins.c:1431
+#, fuzzy
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Upravuje omezení (limity) zdrojů shellu.\n"
+"    \n"
+"    Poskytuje kontrolu nad zdroji dostupnými shellu a procesům z něj\n"
+"    spuštěných (na systémech, které takovou kontrolu umožňují).\n"
+"    \n"
+"    Přepína�e:\n"
+"      -S  použije se „měkké“ (soft) omezení zdroje\n"
+"      -H  použije se „tvrdé“ (hard) omezení zdroje\n"
+"      -a  nahlásí všechna sou�asná omezení (limity)\n"
+"      -b  velikost vyrovnávací paměti socketů\n"
+"      -c  maximální velikost vytvářených core souborů (výpis paměti "
+"programu)\n"
+"      -d  maximální velikost datového segmentu procesu\n"
+"      -e  maximální plánovací priorita („nice“)\n"
+"      -f  maximální velikost souborů zapsaných shellem a jeho potomky\n"
+"      -i  maximální po�et �ekajících signálů\n"
+"      -k  maximální po�et jaderných front událostí („kqueue“) alokovaných\n"
+"          pro tento proces\n"
+"      -l  maximální velikost paměti, kterou může proces zamknout\n"
+"      -m  maximální velikost rezidentní paměti (resident set size)\n"
+"      -n  maximální po�et otevřených deskriptorů souboru\n"
+"      -p  velikost vyrovnávací paměti rour\n"
+"      -q  maximální po�et bajtů ve frontě posixových zpráv\n"
+"      -r  maximální priorita plánování v reálném �ase\n"
+"      -s  maximální velikost zásobníku\n"
+"      -t  maximální množství procesorového �asu v sekundách\n"
+"      -u  maximální po�et procesů uživatele\n"
+"      -v  velikost virtuální paměti\n"
+"      -x  maximální po�et zámků na souborech\n"
+"      -P  maximální po�et pseudoterminálů\n"
+"      -T  maximální po�et vláken\n"
+"    \n"
+"    Ne všechny přepína�e jsou dostupné na všech platformách.\n"
+"    \n"
+"    Je-li zadán LIMIT, jedná se o novou hodnotu daného zdroje. Zvláštní\n"
+"    hodnoty LIMITU „soft“, „hard“ a „unlimited“ znamenají sou�asný měkký\n"
+"    limit, sou�asný tvrdý limit a žádný limit. V opa�ném případě bude\n"
+"    zobrazena sou�asná hodnota limitu daného zdroje. Není-li zadán žádný\n"
+"    přepína�, pak se předpokládá -f.\n"
+"    \n"
+"    Hodnoty jsou v násobcích 1024 bajtů, kromě -t, která je v sekundách,\n"
+"    -p, která je v násobcích 512 bajtů, a -u, což je absolutní po�et "
+"procesů.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vrací úspěch, pokud nebyl zadán neplatný přepína� a nevyskytla se chyba."
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"Zobrazí nebo nastaví uživatelskou masku práv.\n"
+"    \n"
+"    Nastaví Uživatelskou masku práv vytvářených souborů na MÓD. Je-li\n"
+"    MÓD vynechán, bude vytištěna sou�asná hodnota masky.\n"
+"    \n"
+"    Za�íná-li MÓD �íslicí, bude interpretován jako osmi�kové �íslo, jinak\n"
+"    jako řetězec symbolického zápisu práv tak, jak jej chápe chmod(1).\n"
+"    \n"
+"    Přepína�e:\n"
+"      -p\tje-li MÓD vynechán, bude výstup v podobě, kterou lze použít\n"
+"    \tjako vstup\n"
+"      -S\tu�iní výstup symbolický, jinak bude výstupem osmi�kové �íslo\n"
+"    \n"
+"    Návratový kód\n"
+"    Vrátí úspěch, pokud nebyl zadán neplatný MÓD nebo přepína�."
+
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"Po�ká na dokon�ení úlohy a vrátí její návratový kód.\n"
+"    \n"
+"    Po�ká na každý proces ur�ený ID, což může být ID procesu nebo "
+"identifikace\n"
+"    úlohy, a nahlásí jeho návratový kód. Není-li ID zadáno, po�ká na "
+"všechny\n"
+"    právě aktivní dětské procesy a návratovým kódem bude nula. Je-li ID\n"
+"    identifikátorem úlohy, po�ká na všechny procesy z kolony dané úlohy.\n"
+"    \n"
+"    Je-li zadán přepína� -n, po�ká na ukon�ení další úlohy a vrátí její\n"
+"    návratový kód.\n"
+"    \n"
+"    Je-li zadán přepína� -f a je-li zapnuta správa úloh, po�ká na ukon�ení\n"
+"    ukon�ení zadaného ID, místo aby �ekal na změnu jeho stavu.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí kód posledního ID. Selže, pokud ID není platný nebo byl zadán\n"
+"    neplatný přepína�."
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"Po�ká na dokon�ení procesu a vrátí jeho návratový kód.\n"
+"    \n"
+"    Po�ká na každý proces ur�ený PID a nahlásí jeho návratový kód. Není-li\n"
+"    PID zadán, bude se �ekat na všechny právě aktivní procesy potomků a\n"
+"    návratová hodnota bude nula. PID musí být ID procesu.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí kód posledního PID. Selže, pokud PID není platný nebo byl zadán\n"
+"    neplatný přepína�."
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Pro každý prvek seznamu vykoná příkazy.\n"
+"    \n"
+"    Smy�ka „for“ provede posloupnost příkazů pro každý prvek v seznamu "
+"položek.\n"
+"    Pokud „in SLOVECH…;“ není přítomno, pak se předpokládá „in \"$@\"“. "
+"N�ZEV\n"
+"    bude postupně nastaven na každý prvek ve SLOVECH a PŘ�KAZY budou "
+"provedeny.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí kód naposledy provedeného příkazu."
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Aritmetická smy�ka for.\n"
+"    \n"
+"    Ekvivalentní k\n"
+"    \t(( V�R1 ))\n"
+"    \twhile (( V�R2 )); do\n"
+"    \t\tP�KAZY\n"
+"    \t\t(( V�R3 ))\n"
+"    \tdone\n"
+"    V�R1, V�R2 a V�R3 jsou aritmetické výrazy. Chybí-li některý výraz,\n"
+"    chová se, jako by byl vyhodnocen na 1.    \n"
+"    Návratový kód:\n"
+"    Vrátí kód naposledy vykonaného příkazu."
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Vybere slova ze seznamu a vykoná příkazy.\n"
+"    \n"
+"    SLOVA jsou expandována a vytvoří seznam slov. Množina expandovaných "
+"slov\n"
+"    je vytištěna na standardní chybový výstup, každé předchází �íslo.  Není-"
+"li\n"
+"    „in SLOVA“ přítomno, předpokládá se „in \"$@\"“. Pak je zobrazena výzva "
+"PS3\n"
+"    a jeden řádek na�ten ze standardního vstupu. Pokud je řádek tvořen "
+"�íslem\n"
+"    odpovídajícím jednomu ze zobrazených slov, pak N�ZEV bude nastaven na "
+"toto\n"
+"    slovo. Pokud je řádek prázdný, SLOVA a výzva budou znovu zobrazeny. Je-"
+"li\n"
+"    na�ten EOF (konec souboru), příkaz kon�í. Na�tení jakékoliv jiné "
+"hodnoty\n"
+"    nastaví N�ZEV na prázdný řetězec. Na�tený řádek bude uložen do proměnné\n"
+"    REPLY. Po každém výběru budou provedeny PŘ�KAZY, dokud nebude vykonán\n"
+"    příkaz „break“.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí kód naposledy prováděného příkazu."
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"Nahlásí �as spotřebovaný prováděním kolony.\n"
+"    \n"
+"    Vykoná KOLONU a zobrazí přehled reálného �asu, uživatelského\n"
+"    procesorového �asu a systémového procesorového �asu stráveného "
+"prováděním\n"
+"    KOLONY poté, co skon�í.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -p\tzobrazí přehled �asů v přenositelném posixovém formátu\n"
+"    \n"
+"    Hodnota proměnné TIMEFORMAT se použije jako specifikace výstupního "
+"formátu.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Návratová hodnota je návratová hodnota KOLONY."
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Provede příkazy podle shody se vzorem.\n"
+"    \n"
+"    Výběrově provede PŘ�KAZY na základě shody SLOVA se VZOREM. Znak „|“\n"
+"    se používá na oddělení násobných VZORŮ.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí kód naposledy provedeného příkazu."
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Vykoná příkazy na základě splnění podmínky.\n"
+"    \n"
+"    Provede seznam „if PŘ�KAZŮ“. Bude-li jeho návratový kód nula, pak bude\n"
+"    proveden seznam „then PŘ�KAZŮ“. Jinak bude proveden popořadě každý "
+"seznam\n"
+"    „elif PŘ�KAZŮ“ a bude-li jeho návratový kód nula, odpovídající seznam\n"
+"    „then PŘ�KAZŮ“ bude proveden a příkaz if skon�í. V opa�ném případě bude\n"
+"    proveden seznam „else PŘ�KAZŮ“, pokud existuje. Návratová hodnota celé\n"
+"    konstrukce je návratovou hodnotou posledního provedeného příkazu nebo "
+"nula,\n"
+"    pokud žádná z testovaných podmínek není pravdivá.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí kód naposledy provedeného příkazu."
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Vykonává příkazy, dokud test úspěšně prochází.\n"
+"    \n"
+"    Expanduje a provádí PŘ�KAZY tak dlouho, dokud poslední příkaz ve "
+"„while“\n"
+"    PŘ�KAZECH má nulový návratový kód.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí kód naposledy provedeného příkazu."
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Vykonává příkazy, dokud test kon�í neúspěšně.\n"
+"    \n"
+"    Expanduje a provádí PŘ�KAZY tak dlouho, dokud poslední příkaz ve "
+"„until“\n"
+"    PŘ�KAZECH má nenulový návratový kód.    \n"
+"    Návratový kód:\n"
+"    Vrátí kód naposledy provedeného příkazu."
+
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"Vytvoří koproces pojmenovaný N�ZEV.\n"
+"    \n"
+"    Vykoná PŘ�KAZ asynchronně, při�emž jeho standardní výstup a standardní\n"
+"    vstup budou napojeny rourou na souborové deskriptory uvedené v poli "
+"N�ZEV\n"
+"    tohoto shellu pod indexem 0 a 1. Implicitní N�ZEV je „COPROC“.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Příkaz coproc vrací návratový kód 0."
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"Definuje funkci shellu.\n"
+"    \n"
+"    Vytvoří shellovou funkci pojmenovanou N�ZEV. Volána jakožto jednoduchý\n"
+"    příkaz spustí PŘ�KAZY v kontextu volajícího shellu. Je-li vyvolán "
+"N�ZEV,\n"
+"    budou funkci předány argumenty jako $1…$n a název funkce bude umístěn "
+"do\n"
+"    $FUNCNAME.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí úspěch, pokud N�ZEV není jen pro �tení."
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Seskupí příkazy do jednotky.\n"
+"    \n"
+"    Spustí množinu příkazů v jedné skupině. Toto je jeden ze způsobů,\n"
+"    jak přesměrovat celou množinu příkazů.    \n"
+"    Návratový kód:\n"
+"    Vrátí kód naposledy spuštěného příkazu."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"Obnoví úlohu do popředí.\n"
+"    \n"
+"    Ekvivalent k argumentu ÚLOHA příkazu „fg“. Obnoví pozastavenou úlohu\n"
+"    nebo úlohu na pozadí. ÚLOHA může ur�ovat bu� název úlohy, nebo �íslo "
+"úlohy.\n"
+"    Přidání „&“ za ÚLOHU přesune úlohu na pozadí, jako by identifikátor "
+"úlohy\n"
+"    byl argumentem příkazu „bg“.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí kód obnovené úlohy."
+
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Vyhodnotí aritmetický výraz.\n"
+"    \n"
+"    V�RAZ bude vyhodnocen podle pravidel aritmetického vyhodnocování.\n"
+"    Ekvivalentní k „let V�RAZ“.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí 1, pokud se V�RAZ vyhodnotí na 0. Jinak vrátí 0."
+
+# XXX: „coniditional command“ znamená podmínka, výraz podmínky. Nikoliv
+# příkaz, který by byl vykonán na základě splnění jiné podmínky. Tj. překlad
+# „podmíněný příkaz“ je chybný.
+# Toto je nápověda k vestavěnému příkazu „[“.
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"Vykoná podmínkový příkaz.\n"
+"    \n"
+"    Vrátí status 0 nebo 1 podle vyhodnocení výrazu podmínky V�RAZ. Výrazy\n"
+"    se skládají ze stejných primitiv jako u vestavěného příkazu „test“ a\n"
+"    mohou být kombinovány za pomoci následujících operátorů:\n"
+"    \n"
+"      ( V�RAZ )\tVrátí hodnotu V�RAZU\n"
+"      ! V�RAZ\t\tPravda, pokud V�RAZ je nepravdivý; jinak nepravda\n"
+"      V�R1 && V�R2\tPravda, pokud oba V�R1 i V�R2 jsou pravdivé;\n"
+"    \t\tjinak nepravda\n"
+"      V�R1 || V�R2\tPravda, pokud V�R1 nebo V�R2 je pravdivý; jinak "
+"nepravda\n"
+"    \n"
+"    Jsou-li použity operátory „==“ a „!=“, řetězec napravo od operátoru je\n"
+"    použit jako vzor a bude uplatněno porovnávání proti vzoru. Je-li použit\n"
+"    operátor „=~, řetězec napravo do operátoru je uvažován jako regulární\n"
+"    výraz.\n"
+"    \n"
+"    Operátory && a || nevyhodnocují V�R2, pokud V�R1 je dostate�ný na "
+"ur�ení\n"
+"    hodnoty výrazu.\n"
+"    \n"
+"    Návratový kód:\n"
+"    0 nebo 1 podle hodnoty V�RAZU."
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"Názvu běžných proměnných shellu a jejich význam.\n"
+"    \n"
+"    BASH_VERSION\tInformace o verzi tohoto Bashe.\n"
+"    CDPATH\tDvojte�kou oddělený seznam adresářů, který se prohledává\n"
+"    \t\tna adresáře zadané jako argumenty u „cd“.\n"
+"    GLOBIGNORE\tDvojte�kou oddělený seznam vzorů popisujících jména "
+"souborů,\n"
+"    \t\tkterá budou ignorována při expanzi cest.\n"
+"    HISTFILE\tJméno souboru, kde je uložena historie vašich příkazů.\n"
+"    HISTFILESIZE\tMaximální po�et řádků, které tento soubor smí obsahovat.\n"
+"    HISTSIZE\tMaximální po�et řádků historie, které jsou dostupné uvnitř\n"
+"    \t\tběžícího shellu.\n"
+"    HOME\tCelá cesta do vašeho domovského adresáře.\n"
+"    HOSTNAME\tJméno sou�asného stroje.\n"
+"    HOSTTYPE\tDruh CPU, na které tento Bash běží.\n"
+"    IGNOREEOF\tŘídí reakci shellu na přijetí znaku EOF (konec souboru)\n"
+"    \t\tpři samotném vstupu. Je-li nastaveno, pak její hodnota udává\n"
+"    \t\tpo�et znaků EOF, které mohou bezprostředně následovat na prázdném\n"
+"    \t\třádku, dříve než shell skon�í (implicitní hodnota je 10). Není-li\n"
+"    \t\tnastaveno, EOF zna�í konec vstupu.\n"
+"    MACHTYPE\tŘetězec popisující systém, na kterém tento Bash běží.\n"
+"    MAILCHECK\tJak �asto, v sekundách, kontroluje Bash novou poštu.\n"
+"    MAILPATH\tDvojte�kou oddělený seznam názvů souborů, které Bash\n"
+"    \t\tkontroluje na novou poštu.\n"
+"    OSTYPE\tVerze Unixu, na kterém tento Bash běží.\n"
+"    PATH\tDvojte�kou oddělený seznam adresářů, které jsou prohledávány\n"
+"    \t\tna příkazy.\n"
+"    PROMPT_COMMAND\tPříkaz, který je proveden před vytištěním každé\n"
+"    \t\tprimární výzvy shellu.\n"
+"    PS1\t\tŘetězec prvotní výzvy shellu.\n"
+"    PS2\t\tŘetězec druhotné výzvy shellu.\n"
+"    PWD\t\tCelé jméno cesty do aktuálního adresáře.\n"
+"    SHELLOPTS\tDvojte�kou oddělený seznam zapnutých přepína�ů shellu.\n"
+"    TERM\tNázev druhu sou�asného terminálu.\n"
+"    TIMEFORMAT\tVýstupní formát �asové statistiky zobrazované vyhrazeným\n"
+"    \t\tslovem „time“.\n"
+"    auto_resume\tNeprázdná hodnota znamená, že slovo příkazu objevující se\n"
+"    \t\tna řádce automaticky je nejprve vyhledáno v seznamu\n"
+"    \t\tprávě pozastavených úloh. Je-li tam nalezeno, daná úloha bude\n"
+"    \t\tpřepnuta na popředí. Hodnota „exact“ znamená, že slovo příkazu\n"
+"    \t\tse musí přesně shodovat s příkazem v seznamu pozastavených úloh.\n"
+"    \t\tHodnota „substring“ znamená, že slovo příkazu se musí shodovat\n"
+"    \t\ts podřetězcem úlohy. Jakákoliv jiná hodnota znamená, že příkaz\n"
+"    \t\tmusí být předponou pozastavené úlohy.\n"
+"    histchars\tZnaky řídící expanzi historie a rychlé nahrazování.\n"
+"    \t\tPrvní znak je znak nahrazení historie, obvykle „!“. Druhý je\n"
+"    \t\tznak „rychlého nahrazování“, obvykle „^“. Třetí je znak\n"
+"    \t\t„komentáře historie“, obvykle „#“.\n"
+"    HISTIGNORE\tDvojte�kou oddělený seznam vzorů používaný na\n"
+"    \t\trozlišení, které příkazy by měly být uloženy do seznamu\n"
+"    \t\thistorie.\n"
+
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Přidá adresáře do zásobníku.\n"
+"    \n"
+"    Přidá adresář na vrchol zásobníku adresářů nebo zásobník zrotuje tak,\n"
+"    že nový vrchol zásobníku se stane sou�asným pracovním adresářem. Bez\n"
+"    argumentů prohodí dva vrchní adresáře.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -n  Potla�í obvyklou změnu adresáře, když se na zásobník přidávají\n"
+"          adresáře, takže změněn bude pouze zásobník.\n"
+"    \n"
+"    Argumenty:\n"
+"      +N  Zrotuje zásobník tak, že N. adresář (po�ítáno zleva na seznamu\n"
+"          zobrazovaném pomocí „dirs“, po�ínaje nulou) se dostane na vrchol.\n"
+"    \n"
+"      -N  Zrotuje zásobník tak, že N. adresář (po�ítáno zprava na seznamu\n"
+"          zobrazovaném pomocí „dirs“, po�ínaje nulou) se dostane na vrchol.\n"
+"    \n"
+"      ADRES�Ř\n"
+"          Přidá ADRES�Ř na vrchol zásobníku adresářů a u�iní jej novým\n"
+"          sou�asným pracovním adresářem.\n"
+"    \n"
+"    Zásobník adresářů si můžete prohlédnout příkazem „dirs“.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí úspěch, pokud nebyl zadán neplatný argument a změna adresáře\n"
+"    neselhala."
+
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Odebere adresáře ze zásobníku.\n"
+"    \n"
+"    Odstraní položky ze zásobníku adresářů. Bez argumentů odstraní adresář\n"
+"    z vrcholu zásobníku a přepne do nového adresáře na vrchu zásobníku.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -n  Potla�í obvyklou změnu adresáře, když se ze zásobníku odebírají\n"
+"          adresáře, takže změněn bude pouze zásobník.\n"
+"    \n"
+"    Argumenty:\n"
+"      +N  Odstraní N. položku po�ítáno zleva na seznamu zobrazovaném\n"
+"          pomocí „dirs“, po�ínaje nulou. Na příklad: „popd +0“ odstraní\n"
+"          první adresář, „popd -1“ druhý.\n"
+"    \n"
+"      -N  Odstraní N. položku po�ítáno zprava na seznamu zobrazovaném\n"
+"          pomocí „dirs“, po�ínaje nulou. Na příklad: „popd -0“ odstraní\n"
+"          poslední adresář, „popd -1“ další vedle posledního.\n"
+"    \n"
+"    Zásobník adresářů si můžete prohlédnout příkazem „dirs“.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí úspěch, pokud nebyl zadán neplatný argument nebo neselhala změna\n"
+"    adresáře."
+
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Zobrazí zásobník adresářů.\n"
+"    \n"
+"    Zobrazí seznam právě pamatovaných adresářů. Adresáře si najdou cestu\n"
+"    na seznam příkazem „pushd“ a procházet seznamem zpět lze příkazem "
+"„popd“.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -c  vyprázdní zásobník adresářů tím, že smaže všechny jeho prvky\n"
+"      -l  nevypíše vlnkou zkrácené verze adresářů, které jsou relativní\n"
+"          vašemu domovskému adresáři\n"
+"      -p  vypíše zásobník adresářů po jedné položce na řádek\n"
+"      -v  vypíše zásobník adresářů po jedné položce na řádek, při�emž\n"
+"          názvu adresáře předřadí jeho umístění na zásobníku\n"
+"    \n"
+"    Argumenty:\n"
+"      +N  zobrazí N. položku po�ítáno zleva na seznamu, který zobrazuje\n"
+"          dirs, když je vyvolán bez přepína�ů, po�ínaje nulou.\n"
+"    \n"
+"      -N  zobrazí N. položku po�ítáno zprava na seznamu, který zobrazuje\n"
+"          dirs, když je vyvolán bez přepína�ů, po�ínaje nulou.    \n"
+"    Návratový kód:\n"
+"    Vrátí úspěch, pokud nebyl zadán neplatný přepína� a nevyskytla se chyba."
+
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"Zapne nebo vypne volby (přepína�e) shellu.\n"
+"    \n"
+"    Změní nastavení každého přepína�e shellu N�ZEV_VOLBY. Bez přepína�ových\n"
+"    argumentů vypíše každý zadaný N�ZEV_VOLBY, nebo seznam všech přepína�ů\n"
+"    shellu, nebyl-li zadán žádný N�ZEV_VOLBY, s příznakem, zda je, nebo\n"
+"    není přepína� nastaven.\n"
+"    Přepína�e:\n"
+"      -o\tomezí N�ZVY_VOLEB na ty, které jsou definovány pro použití\n"
+"    \ts „set -o“\n"
+"      -p\tvypíše každou volbu shellu s ur�ením jejího stavu\n"
+"      -q\tpotla�í výstup\n"
+"      -s\tzapne [set] každý N�ZEV_VOLBY\n"
+"      -u\tvypne [unset] každý N�ZEV_VOLBY\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí úspěch, je-li N�ZEV_VOLBY zapnut. Selže, byl-li zadán neplatný\n"
+"    přepína� nebo je-li N�ZEV_VOLBY vypnut."
+
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"Naformátuje a vypíše ARGUMENTY podle definice FORM�TU.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -v proměnná  výstup umístí do proměnné shellu PROMĚNN� namísto\n"
+"                   odeslání na standardní výstup.\n"
+"    \n"
+"    FORM�T je řetězec znaků, který obsahuje tři druhy objektů: oby�ejné "
+"znaky,\n"
+"    které jsou prostě zkopírovány na standardní výstup, posloupnosti "
+"escapových\n"
+"    znaků, které jsou zkonvertovány a zkopírovány na standardní výstup a\n"
+"    formátovací definice, z nichž každá způsobí vytištění dalšího "
+"argumentu.\n"
+"    \n"
+"    Tento printf interpretuje vedle standardních formátovacích definic\n"
+"    popsaných v printf(1) též:\n"
+"    \n"
+"      %b           expanduje posloupnosti escapované zpětným lomítkem\n"
+"                   v odpovídajícím argumentu\n"
+"      %q           oescapuje argument takovým způsobem, že jej bude možné\n"
+"                   použít jako vstup shellu\n"
+"      %(FORM�T)T   vypíše řetězec data-�asu tak, jako by to byl výstup\n"
+"                   funkce strftime(3) s formátovacím řetězcem FORM�T\n"
+"    \n"
+"    FORM�T lze znovu použít podle potřeby ke zpracování všech argumentů. Je-"
+"li\n"
+"    zde méně argumentů, než FORM�T vyžaduje, nadbyte�né formátovací znaky\n"
+"    se budou chovat, jako by nulová hodnota nebo nulový řetězec, jak je "
+"třeba,\n"
+"    byly zadány.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí úspěch, pokud nebyl zadán neplatný přepína� a nedošlo k chybě\n"
+"    zápisu nebo přiřazení."
+
+#: builtins.c:1971
+#, fuzzy
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Ur�uje, jak budou argumenty doplňovány pomocí knihovny Readline.\n"
+"    \n"
+"    Pro každý N�ZEV udává, jak se budou doplňovat argumenty. Nejsou-li\n"
+"    zadány žádné přepína�e, budou vypsány existující pravidla doplňování\n"
+"    v podobě vhodné pro jejich znovu užití jako vstup.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -p  vypíše existující pravidla doplňování v znovu použitelném tvaru\n"
+"      -r  odstraní pro každý N�ZEV doplňovací pravidlo, nebo není-li zadán\n"
+"          žádný N�ZEV, zruší všechna pravidla\n"
+"      -D  použije pravidla doplňování a akce jako implicitní pro příkazy,\n"
+"          které nemají žádné ur�ité pravidlo doplňování definováno\n"
+"      -E  použije pravidla doplňování a akce na „prázdné“ příkazy –\n"
+"          pravidla doplňování se uplatní na prázdný řádek\n"
+"      -I  použije pravidla doplňování a akce na první slovo (obvykle "
+"příkaz)\n"
+"    \n"
+"    Použije-li se doplňování, akce se uplatní v pořadí, v jakém jsou "
+"vypsány\n"
+"    přepína�e psané velkými písmeny výše. Je-li zadáno více přepína�ů,\n"
+"    přepína� -D bude upřednostněn před přepína�em -E. Oba přepína�e "
+"přebíjejí\n"
+"    přepína� -I.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí úspěch, pokud nebyl zadán neplatný přepína� a nevyskytla se chyba."
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Zobrazí možná doplnění v závislosti na přepína�ích.\n"
+"    \n"
+"    Je zamýšleno pro použití uvnitř shellových funkcí generujících možná\n"
+"    doplnění. Je-li poskytnut volitelný argument SLOVO, budou vygenerovány\n"
+"    shody se SLOVEM.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí úspěch, pokud nebyl zadán neplatný přepína� a nevyskytla se chyba."
+
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"Upraví nebo zobrazí možnosti doplňování.\n"
+"    \n"
+"    Pozmění možnosti doplňování každého N�ZVU, nebo, není-li zadán žádný\n"
+"    N�ZEV, právě prováděného doplňování. Nejsou-li zadány žádné MOŽNOSTI,\n"
+"    vypíše možnosti doplňování každého N�ZVU nebo definic právě prováděného\n"
+"    doplňování.\n"
+"    \n"
+"    Přepína�e:\n"
+"    \t-o možnost\tNastaví možnost doplňování MOŽNOST každému N�ZVU\n"
+"    \t-D\t\tZmění možnosti doplňování „implicitnímu“ příkazu\n"
+"    \t-E\t\tZmění možnosti doplňování „prázdnému“ příkazu\n"
+"    \t-I\t\tZmění možnosti doplňování prvnímu slovu\n"
+"    \n"
+"    Pomocí „+o“ namísto „-o“ zadanou možnost vypnete.\n"
+"    \n"
+"    Argumenty:\n"
+"    Každý N�ZEV odkazuje na příkaz, pro který musí být předem definováno\n"
+"    pravidlo (definice) doplňování pomocí vestavěného příkazu „complete“.\n"
+"    Nejsou-li zadány žádné N�ZVY, musí být compopt volán funkcí, která "
+"právě\n"
+"    generuje doplňování. Změněny pak budou možnosti tohoto právě "
+"prováděného\n"
+"    generátoru doplňování.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí úspěch, pokud nebyl zadán neplatný přepína� a N�ZEV měl "
+"definováno\n"
+"    pravidlo doplňování."
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"Na�te řádky ze standardního vstupu do proměnné typu indexované pole.\n"
+"    \n"
+"    Na�te řádky ze standardního vstupu nebo z deskriptoru souboru FD, byl-"
+"li\n"
+"    zadán přepína� -u, do proměnné POLE, která je typu indexované pole.\n"
+"    Implicitním POLEM je proměnná MAPFILE.\n"
+"    \n"
+"    Přepína�e:\n"
+"      -d oddělova�  Řádky zakon�í ODDĚLOVAČEM namísto znakem nového řádku\n"
+"      -n po�et      Zkopíruje nejvýše POČET řádků. Je-li POČET 0,\n"
+"                    zkopíruje všechny řádky\n"
+"      -O po�átek    Přiřazování do POLE za�ne na indexu POČ�TEK,\n"
+"                    výchozí index je 0\n"
+"      -s po�et      Zahodí prvních POČET na�tených řádků\n"
+"      -t            Odstraní znak konce řádku z každého na�teného řádku\n"
+"      -u fd         Řádky �te z deskriptoru souboru FD namísto ze\n"
+"                    standardního vstupu\n"
+"      -C volání     Vyhodnotí VOL�N� pokaždé, když je na�teno MNOŽSTV�\n"
+"                    řádků\n"
+"      -c množství   Udává po�et řádků, které je třeba pře�íst, mezi\n"
+"                    každým zavoláním VOL�N�\n"
+"    \n"
+"    Argumenty:\n"
+"      POLE          Název proměnné typu pole, do které budou přiřazena data\n"
+"    \n"
+"    Je-li uvedeno -C bez -c, implicitní množství bude 5000. Vyhodnocovanému\n"
+"    VOL�N� budou jako dodate�né argumenty předány index prvku pole, do\n"
+"    kterého se má vzápětí přiřazovat, a řádek, který má být přiřazen do\n"
+"    tohoto prvku.\n"
+"    \n"
+"    Nebude-li explicitně udán po�átek, mapfile vyprázdní POLE před tím,\n"
+"    než do něj za�ne přiřazovat.\n"
+"    \n"
+"    Návratový kód:\n"
+"    Vrátí úspěch, pokud nebyl zadán neplatný přepína�, POLE nebylo jen pro\n"
+"    �tení a bylo indexovaným polem."
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Na�te řádky ze souboru do proměnné typu pole.\n"
+"    \n"
+"    Synonymum pro „mapfile“."
+
+#, fuzzy
+#~ msgid "Copyright (C) 2019 Free Software Foundation, Inc."
+#~ msgstr "Copyright © 2018 Free Software Foundation, Inc."
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "Vrátí kontext aktuálního volání podprogramu.\n"
+#~ "    \n"
+#~ "    Bez V�RAZU vrátí "
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process: proces %5ld (%s) do the_pipeline"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "Neznámé �íslo signálu"
+
+#~ msgid "Copyright (C) 2014 Free Software Foundation, Inc."
+#~ msgstr "Copyright © 2014 Free Software Foundation, Inc."
+
+#~ msgid ":"
+#~ msgstr ":"
+
+#~ msgid "true"
+#~ msgstr "true"
+
+#~ msgid "false"
+#~ msgstr "false"
+
+#~ msgid "times"
+#~ msgstr "times"
+
+#~ msgid "Copyright (C) 2009 Free Software Foundation, Inc.\n"
+#~ msgstr "Copyright © 2009 Free Software Foundation, Inc.\n"
+
+#~ msgid ""
+#~ "License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl."
+#~ "html>\n"
+#~ msgstr ""
+#~ "Licence GPLv2+: GNU GPL verze 2 nebo novější <http://gnu.org/licenses/gpl."
+#~ "html>\n"
+
+#~ msgid ""
+#~ ".  With EXPR, returns\n"
+#~ "    "
+#~ msgstr ""
+#~ ".  S V�RAZEM vrátí\n"
+#~ "    "
+
+#~ msgid ""
+#~ "; this extra information can be used to\n"
+#~ "    provide a stack trace.\n"
+#~ "    \n"
+#~ "    The value of EXPR indicates how many call frames to go back before "
+#~ "the\n"
+#~ "    current one; the top frame is frame 0."
+#~ msgstr ""
+#~ "; tato dodate�ná informace může být\n"
+#~ "    použita jako výpis zásobníku volání.\n"
+#~ "    \n"
+#~ "    Hodnota V�RAZU ur�uje, kolik rámců volání jít zpět před sou�asný,\n"
+#~ "    vrcholový rámec je rámce 0."
+
+#~ msgid "xrealloc: cannot reallocate %lu bytes (%lu bytes allocated)"
+#~ msgstr "xrealloc: nelze přealokovat %'lu bajtů (%'lu bajtů alokováno)"
+
+#~ msgid "xrealloc: cannot allocate %lu bytes"
+#~ msgstr "xrealloc: nelze alokovat %'lu bajtů"
+
+#~ msgid "xrealloc: %s:%d: cannot reallocate %lu bytes (%lu bytes allocated)"
+#~ msgstr ""
+#~ "xrealloc: %s:%d: nelze přealokovat %'lu bajtů (%'lu bajtů alokováno)"
+
+#~ msgid " "
+#~ msgstr " "
+
+#~ msgid "Without EXPR, returns returns \"$line $filename\".  With EXPR,"
+#~ msgstr "Bez V�RAZU vrací „$line $filename“. S V�RAZEM "
+
+#~ msgid "returns \"$line $subroutine $filename\"; this extra information"
+#~ msgstr "vrací „$line $subroutine $filename“. Tyto údaje"
+
+#~ msgid "can be used used to provide a stack trace."
+#~ msgstr "lze využít při výpisu zásobníku volání."
+
+#~ msgid ""
+#~ "The value of EXPR indicates how many call frames to go back before the"
+#~ msgstr "Hodnota V�RAZ zna�í, kolik rámců volání se má jít zpět před"
+
+#~ msgid "current one; the top frame is frame 0."
+#~ msgstr "sou�asný rámec, vrcholový rámec má �íslo 0."
+
+#~ msgid "%s: invalid number"
+#~ msgstr "%s: chybné �íslo"
+
+#~ msgid "Shell commands matching keywords `"
+#~ msgstr "Příkazy shellu shodující se s klí�ovými slovy „"
+
+#~ msgid "Display the list of currently remembered directories.  Directories"
+#~ msgstr "Zobrazí seznam právě zapamatovaných adresářů. Adresáře"
+
+#~ msgid "find their way onto the list with the `pushd' command; you can get"
+#~ msgstr "se na seznam umisťují příkazem „pushd“, předchozí stav seznamu lze"
+
+#~ msgid "back up through the list with the `popd' command."
+#~ msgstr "vrátit příkazem „popd“."
+
+#~ msgid ""
+#~ "The -l flag specifies that `dirs' should not print shorthand versions"
+#~ msgstr "Příznak -l zna�í, že „dirs“ nemá vypisovat zkrácené verze adresářů,"
+
+#~ msgid ""
+#~ "of directories which are relative to your home directory.  This means"
+#~ msgstr "které leží pod vaším domovským adresářem. To znamená, že „~/bin“"
+
+#~ msgid "that `~/bin' might be displayed as `/homes/bfox/bin'.  The -v flag"
+#~ msgstr "smí být zobrazen jako „/homes/bfox/bin“. Příznak -v způsobí, že"
+
+#~ msgid "causes `dirs' to print the directory stack with one entry per line,"
+#~ msgstr ""
+#~ "„dirs“ vypíše zásobník adresářů záznam po záznamu na samostatné řádky"
+
+#~ msgid ""
+#~ "prepending the directory name with its position in the stack.  The -p"
+#~ msgstr "a před název adresáře uvede jeho pořadí v zásobníku. Příznak -p"
+
+#~ msgid "flag does the same thing, but the stack position is not prepended."
+#~ msgstr "dělá to samé, ale bez informace o umístění na zásobníku."
+
+#~ msgid ""
+#~ "The -c flag clears the directory stack by deleting all of the elements."
+#~ msgstr "Příznak -c vyprázdní zásobník smazáním všem prvků."
+
+#~ msgid ""
+#~ "+N   displays the Nth entry counting from the left of the list shown by"
+#~ msgstr "+N   zobrazí N. položku po�ítáno zleva na seznamu, který by ukázal"
+
+#~ msgid "     dirs when invoked without options, starting with zero."
+#~ msgstr "     příkaz dirs bez jakýchkoliv přepína�ů, po�ítáno od nuly."
+
+#~ msgid ""
+#~ "-N   displays the Nth entry counting from the right of the list shown by"
+#~ msgstr "-N   zobrazí N. položku po�ítáno zprava na seznamu, který by ukázal"
+
+#~ msgid "Adds a directory to the top of the directory stack, or rotates"
+#~ msgstr ""
+#~ "Přidá adresář na vrchol zásobníku adresářů, nebo rotuje zásobník tak,"
+
+#~ msgid "the stack, making the new top of the stack the current working"
+#~ msgstr "že nový vrchol zásobníku se stane pracovním adresářem."
+
+#~ msgid "directory.  With no arguments, exchanges the top two directories."
+#~ msgstr "Bez argumentů prohodí horní dva adresáře."
+
+#~ msgid "+N   Rotates the stack so that the Nth directory (counting"
+#~ msgstr "+N   Zrotuje zásobník tak, že N. adresář (po�ítáno"
+
+#~ msgid "     from the left of the list shown by `dirs', starting with"
+#~ msgstr "     zleva seznamu, který by ukázal „dirs“, po�ínaje od"
+
+#~ msgid "     zero) is at the top."
+#~ msgstr "     nuly) se dostane na vrchol."
+
+#~ msgid "-N   Rotates the stack so that the Nth directory (counting"
+#~ msgstr "-N   Zrotuje zásobník tak, že N. adresář (po�ítáno"
+
+#~ msgid "     from the right of the list shown by `dirs', starting with"
+#~ msgstr "     zprava seznamu, který by ukázal „dirs“, po�ínaje od"
+
+#~ msgid "-n   suppress the normal change of directory when adding directories"
+#~ msgstr ""
+#~ "-n   potla�í obvyklou změnu pracovního adresáře při přidávání adresářů"
+
+#~ msgid "     to the stack, so only the stack is manipulated."
+#~ msgstr "     na zásobník, takže se změní jen obsah zásobníku."
+
+#~ msgid "dir  adds DIR to the directory stack at the top, making it the"
+#~ msgstr "adr  přidá ADR na vrchol zásobníku adresářů a u�iní jej"
+
+#~ msgid "     new current working directory."
+#~ msgstr "     novým pracovním adresářem."
+
+#~ msgid "You can see the directory stack with the `dirs' command."
+#~ msgstr "Zásobník adresářů si lze prohlédnout příkazem „dirs“."
+
+#~ msgid "Removes entries from the directory stack.  With no arguments,"
+#~ msgstr "Odstraní položky ze zásobníku adresářů. Bez argumentů"
+
+#~ msgid "removes the top directory from the stack, and cd's to the new"
+#~ msgstr "odstraní adresář z vrcholu zásobníku a přepne se do nového"
+
+#~ msgid "+N   removes the Nth entry counting from the left of the list"
+#~ msgstr "+N   odstraní N. položku po�ítáno zleva na seznamu,"
+
+#~ msgid "     shown by `dirs', starting with zero.  For example: `popd +0'"
+#~ msgstr "     který by ukázal „dirs“, po�ínaje nulou. Například „popd +0“"
+
+#~ msgid "     removes the first directory, `popd +1' the second."
+#~ msgstr "     odstraní první adresář, „popd +1“ druhý."
+
+#~ msgid "-N   removes the Nth entry counting from the right of the list"
+#~ msgstr "-N   odstraní N. položku po�ítáno zprava na seznamu,"
+
+#~ msgid "     shown by `dirs', starting with zero.  For example: `popd -0'"
+#~ msgstr "     který by ukázal „dirs“, po�ínaje nulou. Například: „popd -0“"
+
+#~ msgid "     removes the last directory, `popd -1' the next to last."
+#~ msgstr "     odstraní poslední adresář, “popd -1“ předposlední."
+
+#~ msgid ""
+#~ "-n   suppress the normal change of directory when removing directories"
+#~ msgstr ""
+#~ "-n   potla�í obvyklou změnu pracovního adresáře při odebírání adresářů"
+
+#~ msgid "     from the stack, so only the stack is manipulated."
+#~ msgstr "     ze zásobníku, takže pouze zásobník dozná změny."
+
+#~ msgid "allocated"
+#~ msgstr "alokováno"
+
+#~ msgid "freed"
+#~ msgstr "uvolněno"
+
+#~ msgid "requesting resize"
+#~ msgstr "požadující velikost"
+
+#~ msgid "just resized"
+#~ msgstr "právě změněna velikost"
+
+#~ msgid "bug: unknown operation"
+#~ msgstr "chyba: neznámá operace"
+
+#~ msgid "malloc: watch alert: %p %s "
+#~ msgstr "malloc: výstraha sledování: %p %s"
+
+#~ msgid ""
+#~ "Exit from within a FOR, WHILE or UNTIL loop.  If N is specified,\n"
+#~ "    break N levels."
+#~ msgstr ""
+#~ "Ukon�í smy�ku FOR, WHILE nebo UNTIL. Je-li zadáno N, ukon�í N úrovní."
+
+#~ msgid ""
+#~ "Run a shell builtin.  This is useful when you wish to rename a\n"
+#~ "    shell builtin to be a function, but need the functionality of the\n"
+#~ "    builtin within the function itself."
+#~ msgstr ""
+#~ "Spustí vestavěný příkaz shellu. Toto se hodí, přejete-li si přejmenovat\n"
+#~ "    vestavěný příkaz na funkci, avšak funkcionalitu vestavěného příkazu\n"
+#~ "    potřebujete v téže funkci."
+
+#~ msgid ""
+#~ "Print the current working directory.  With the -P option, pwd prints\n"
+#~ "    the physical directory, without any symbolic links; the -L option\n"
+#~ "    makes pwd follow symbolic links."
+#~ msgstr ""
+#~ "Vypíše sou�asný pracovní adresář. S přepína�em -P vypíše pwd fyzický\n"
+#~ "    adresář prostý všech symbolický odkazů; přepína� -L přinutí pwd\n"
+#~ "    následovat symbolické odkazy."
+
+#~ msgid "Return a successful result."
+#~ msgstr "Vrací výsledek úspěchu."
+
+#~ msgid ""
+#~ "Runs COMMAND with ARGS ignoring shell functions.  If you have a shell\n"
+#~ "    function called `ls', and you wish to call the command `ls', you can\n"
+#~ "    say \"command ls\".  If the -p option is given, a default value is "
+#~ "used\n"
+#~ "    for PATH that is guaranteed to find all of the standard utilities.  "
+#~ "If\n"
+#~ "    the -V or -v option is given, a string is printed describing "
+#~ "COMMAND.\n"
+#~ "    The -V option produces a more verbose description."
+#~ msgstr ""
+#~ "Spustí PŘ�KAZ s ARGUMENTY ignoruje funkce shellu. Máte-li shellovou\n"
+#~ "    funkci pojmenovanou „ls“, a chcete-li zavolat příkaz „ls“, použijte\n"
+#~ "    „command ls“. Je-li zadán přepína� -p, bude pro PATH použita "
+#~ "implicitní\n"
+#~ "    hodnota, která zaru�uje, že budou nalezeny všechny standardní "
+#~ "nástroje.\n"
+#~ "    Je-li zadán přepína� -V nebo -v, bude vytištěn řetězec popisující "
+#~ "P�KAZ.\n"
+#~ "    Přepína� -V produkuje podrobnější popis."
+
+#~ msgid ""
+#~ "Declare variables and/or give them attributes.  If no NAMEs are\n"
+#~ "    given, then display the values of variables instead.  The -p option\n"
+#~ "    will display the attributes and values of each NAME.\n"
+#~ "    \n"
+#~ "    The flags are:\n"
+#~ "    \n"
+#~ "      -a\tto make NAMEs arrays (if supported)\n"
+#~ "      -f\tto select from among function names only\n"
+#~ "      -F\tto display function names (and line number and source file name "
+#~ "if\n"
+#~ "    \tdebugging) without definitions\n"
+#~ "      -i\tto make NAMEs have the `integer' attribute\n"
+#~ "      -r\tto make NAMEs readonly\n"
+#~ "      -t\tto make NAMEs have the `trace' attribute\n"
+#~ "      -x\tto make NAMEs export\n"
+#~ "    \n"
+#~ "    Variables with the integer attribute have arithmetic evaluation (see\n"
+#~ "    `let') done when the variable is assigned to.\n"
+#~ "    \n"
+#~ "    When displaying values of variables, -f displays a function's name\n"
+#~ "    and definition.  The -F option restricts the display to function\n"
+#~ "    name only.\n"
+#~ "    \n"
+#~ "    Using `+' instead of `-' turns off the given attribute instead.  "
+#~ "When\n"
+#~ "    used in a function, makes NAMEs local, as with the `local' command."
+#~ msgstr ""
+#~ "Deklaruje proměnné a/nebo jim nastaví atributy. Nejsou-li zadány N�ZVY,\n"
+#~ "    tak místo toho zobrazí hodnoty proměnných. Přepína� -p zobrazí "
+#~ "atributy\n"
+#~ "    a hodnoty pro každý N�ZEV.\n"
+#~ "    \n"
+#~ "    Příznaky jsou:\n"
+#~ "    \n"
+#~ "      -a\tu�iní N�ZVY poli (je-li podporováno)\n"
+#~ "      -f\tvybírá pouze mezi názvy funkcí\n"
+#~ "      -F\tzobrazí názvy funkcí (a �íslo řádku a název zdrojového "
+#~ "souboru,\n"
+#~ "        \tje-li zapnuto ladění) bez definic\n"
+#~ "      -i\tpřiřadí N�ZVŮM atribut „integer“ (�íslo)\n"
+#~ "      -r\tu�iní N�ZVY jen pro �tení\n"
+#~ "      -t\tpřiřadí N�ZVŮM atribut „trace“ (sledování)\n"
+#~ "      -x\tvyexportuje N�ZVY\n"
+#~ "    \n"
+#~ "    Proměnné s atributem integer jsou aritmeticky vyhodnoceny (vizte "
+#~ "„let“),\n"
+#~ "    když je do proměnné přiřazováno.\n"
+#~ "    \n"
+#~ "    Při zobrazování hodnot proměnných -f zobrazí názvy a definice "
+#~ "funkcí.\n"
+#~ "    Přepína� -F omezí výpis jen na názvy funkcí.\n"
+#~ "    \n"
+#~ "    Pomocí „+“ namísto „-“ daný atribut odeberete. Je-li použito uvnitř\n"
+#~ "    funkce, u�iní N�ZVY lokální stejně jako příkaz „local“."
+
+#~ msgid "Obsolete.  See `declare'."
+#~ msgstr "Zastaralé. Vizte „declare“."
+
+#~ msgid ""
+#~ "Create a local variable called NAME, and give it VALUE.  LOCAL\n"
+#~ "    can only be used within a function; it makes the variable NAME\n"
+#~ "    have a visible scope restricted to that function and its children."
+#~ msgstr ""
+#~ "Vytvoří lokální proměnnou pojmenovanou N�ZEV a přiřadí jí HODNOTU.\n"
+#~ "    LOCAL smí být použito jen uvnitř funkcí. U�iní proměnnou N�ZEV "
+#~ "viditelnou\n"
+#~ "    jen v dané funkci a jejích potomcích."
+
+#~ msgid ""
+#~ "Output the ARGs.  If -n is specified, the trailing newline is suppressed."
+#~ msgstr ""
+#~ "Vypíše ARGUMENTY. Je-li zadáni -n, závěre�ný konec řádku bude potla�en."
+
+#~ msgid ""
+#~ "Enable and disable builtin shell commands.  This allows\n"
+#~ "    you to use a disk command which has the same name as a shell\n"
+#~ "    builtin without specifying a full pathname.  If -n is used, the\n"
+#~ "    NAMEs become disabled; otherwise NAMEs are enabled.  For example,\n"
+#~ "    to use the `test' found in $PATH instead of the shell builtin\n"
+#~ "    version, type `enable -n test'.  On systems supporting dynamic\n"
+#~ "    loading, the -f option may be used to load new builtins from the\n"
+#~ "    shared object FILENAME.  The -d option will delete a builtin\n"
+#~ "    previously loaded with -f.  If no non-option names are given, or\n"
+#~ "    the -p option is supplied, a list of builtins is printed.  The\n"
+#~ "    -a option means to print every builtin with an indication of whether\n"
+#~ "    or not it is enabled.  The -s option restricts the output to the "
+#~ "POSIX.2\n"
+#~ "    `special' builtins.  The -n option displays a list of all disabled "
+#~ "builtins."
+#~ msgstr ""
+#~ "Povolí nebo zakáže vestavěný příkaz shellu. To vám umožňuje použít\n"
+#~ "    příkaz z disku, který má stejné jméno jako vestavěný příkaz shellu, "
+#~ "aniž\n"
+#~ "    byste museli zadávat celou cestu. Je-li použito -n, N�ZVY se stanou\n"
+#~ "    zakázanými, jinak budou povoleny. Například „test“ z PATH namísto "
+#~ "verze\n"
+#~ "    vestavěné do shellu lze používat tak, že napíšete „enable -n test“. "
+#~ "Na\n"
+#~ "    systémech podporujících dynamické zavádění přepína� -f může být "
+#~ "použit\n"
+#~ "    pro zavedení nových vestavěných příkazů ze sdíleného objektu "
+#~ "N�ZEV_SOUBORU.\n"
+#~ "    Přepína� -d odstraní vestavěný příkaz zavedený přes -f. Není-li "
+#~ "zadán\n"
+#~ "    žádný přepína� nebo je-li zadán přepína� -p, bude vypsán seznam "
+#~ "vestavěných\n"
+#~ "    příkazů. Přepína� -a znamená, že budou vypsány všechny vestavěné "
+#~ "příkazy a\n"
+#~ "    u každého bude vyzna�eno, zda je povolen nebo zakázán. Přepína� -s "
+#~ "omezí\n"
+#~ "    výpis na příkazy uvedené v POSIX.2. Přepína� -n zobrazí seznam všech\n"
+#~ "    zakázaných vestavěných příkazů."
+
+#~ msgid ""
+#~ "Read ARGs as input to the shell and execute the resulting command(s)."
+#~ msgstr "Na�te ARGUMENTY jako vstup shellu a výsledný příkaz(y) provede."
+
+#~ msgid ""
+#~ "Exec FILE, replacing this shell with the specified program.\n"
+#~ "    If FILE is not specified, the redirections take effect in this\n"
+#~ "    shell.  If the first argument is `-l', then place a dash in the\n"
+#~ "    zeroth arg passed to FILE, as login does.  If the `-c' option\n"
+#~ "    is supplied, FILE is executed with a null environment.  The `-a'\n"
+#~ "    option means to make set argv[0] of the executed process to NAME.\n"
+#~ "    If the file cannot be executed and the shell is not interactive,\n"
+#~ "    then the shell exits, unless the shell option `execfail' is set."
+#~ msgstr ""
+#~ "Provede SOUBOR, při�emž nahradí tento shell zadaným programem.\n"
+#~ "    Není-li SOUBOR zadán, přesměrování zapůsobí v tomto shellu. Je-li "
+#~ "prvním\n"
+#~ "    argumentem „-l“, bude do nultého argumentu SOUBORU umístěna poml�ka "
+#~ "tak,\n"
+#~ "    jak to dělá login. Je-li zadán přepína� „-c“, bude SOUBOR spuštěn\n"
+#~ "    s prázdným prostředím. Přepína� „-a“ znamená, že argv[0] prováděného\n"
+#~ "    procesu bude nastaven na N�ZEV. Pokud soubor nemůže být proveden a "
+#~ "shell\n"
+#~ "    není interaktivní, pak shell bude ukon�en, pokud přepína� shellu\n"
+#~ "    „execfail“ není nastaven."
+
+#~ msgid "Logout of a login shell."
+#~ msgstr "Odhlásí z přihlašovacího (login) shellu."
+
+#~ msgid ""
+#~ "For each NAME, the full pathname of the command is determined and\n"
+#~ "    remembered.  If the -p option is supplied, PATHNAME is used as the\n"
+#~ "    full pathname of NAME, and no path search is performed.  The -r\n"
+#~ "    option causes the shell to forget all remembered locations.  The -d\n"
+#~ "    option causes the shell to forget the remembered location of each "
+#~ "NAME.\n"
+#~ "    If the -t option is supplied the full pathname to which each NAME\n"
+#~ "    corresponds is printed.  If multiple NAME arguments are supplied "
+#~ "with\n"
+#~ "    -t, the NAME is printed before the hashed full pathname.  The -l "
+#~ "option\n"
+#~ "    causes output to be displayed in a format that may be reused as "
+#~ "input.\n"
+#~ "    If no arguments are given, information about remembered commands is "
+#~ "displayed."
+#~ msgstr ""
+#~ "Pro každý N�ZEV je ur�ena plná cesta k příkazu a je zapamatována.\n"
+#~ "    Za použití přepína�e -p se vezme N�ZEV_CESTY za plnou cestu k N�ZVU "
+#~ "a\n"
+#~ "    žádné vyhledávání cesty se nekoná. Přepína� -r způsobí, že shell "
+#~ "zapomene\n"
+#~ "    všechny zapamatovaná umístění. Přepína� -d způsobí, že shell "
+#~ "zapomene\n"
+#~ "    zapamatovaná umístění každého N�ZVU. Je-li zadán přepína� -t, bude "
+#~ "vypsána\n"
+#~ "    plná cesta ke každému N�ZVU. Je-li s -t zadáno více N�ZVŮ, N�ZEV "
+#~ "bude\n"
+#~ "    vypsán před uloženou celou cestou. Přepína� -l vytvoří takový "
+#~ "výstup,\n"
+#~ "    který lze opět použít jako vstup. Nejsou-li zadány žádné argumenty,\n"
+#~ "    budou vypsány informace o zapamatovaných příkazech."
+
+#~ msgid ""
+#~ "Display helpful information about builtin commands.  If PATTERN is\n"
+#~ "    specified, gives detailed help on all commands matching PATTERN,\n"
+#~ "    otherwise a list of the builtins is printed.  The -s option\n"
+#~ "    restricts the output for each builtin command matching PATTERN to\n"
+#~ "    a short usage synopsis."
+#~ msgstr ""
+#~ "Zobrazí užite�né informace o vestavěných příkazech. Je-li zadán VZOREK,\n"
+#~ "    vrátí podrobnou nápovědu ke všem příkazům odpovídajícím VZORKU, jinak "
+#~ "je\n"
+#~ "    vytištěn seznam vestavěných příkazů. Přepína� -s omezí výstup "
+#~ "o každém\n"
+#~ "    vestavěném příkazu odpovídajícího VZORKU na stru�ný popis použití."
+
+#~ msgid ""
+#~ "By default, removes each JOBSPEC argument from the table of active jobs.\n"
+#~ "    If the -h option is given, the job is not removed from the table, but "
+#~ "is\n"
+#~ "    marked so that SIGHUP is not sent to the job if the shell receives a\n"
+#~ "    SIGHUP.  The -a option, when JOBSPEC is not supplied, means to remove "
+#~ "all\n"
+#~ "    jobs from the job table; the -r option means to remove only running "
+#~ "jobs."
+#~ msgstr ""
+#~ "Implicitně odstraní každý argument ÚLOHA z tabulky aktivních úloh. Je-li\n"
+#~ "    zadán přepína� -h, úloha není odstraněna z tabulky, ale je ozna�ena "
+#~ "tak.\n"
+#~ "    že úloze nebude zaslán SIGHUP, když shell obdrží SIGHUP. Přepína� -"
+#~ "a,\n"
+#~ "    pokud není uvedena ÚLOHA, znamená, že všechny úlohy budou odstraněny\n"
+#~ "    z tabulky úloh. Přepína� -r znamená, že pouze běžící úlohy budou\n"
+#~ "    odstraněny."
+
+#~ msgid ""
+#~ "Causes a function to exit with the return value specified by N.  If N\n"
+#~ "    is omitted, the return status is that of the last command."
+#~ msgstr ""
+#~ "Způsobí ukon�ení funkce s návratovou hodnotou uvedenou v N. Je-li\n"
+#~ "    N vynecháno, návratový kód je roven poslednímu příkazu."
+
+#~ msgid ""
+#~ "For each NAME, remove the corresponding variable or function.  Given\n"
+#~ "    the `-v', unset will only act on variables.  Given the `-f' flag,\n"
+#~ "    unset will only act on functions.  With neither flag, unset first\n"
+#~ "    tries to unset a variable, and if that fails, then tries to unset a\n"
+#~ "    function.  Some variables cannot be unset; also see readonly."
+#~ msgstr ""
+#~ "Pro každé JMÉNO odstraní odpovídající proměnnou nebo funkci.\n"
+#~ "    Spolu s „-v“ bude unset fungovat jen na proměnné. S příznakem „-f“ "
+#~ "bude\n"
+#~ "    unset fungovat jen na funkce. Bez těchto dvou příznaků unset nejprve "
+#~ "zkusí\n"
+#~ "    zrušit proměnnou a pokud toto selže, tak zkusí zrušit funkci. "
+#~ "Některé\n"
+#~ "    proměnné nelze odstranit. Taktéž vizte příkaz „readonly“."
+
+#~ msgid ""
+#~ "NAMEs are marked for automatic export to the environment of\n"
+#~ "    subsequently executed commands.  If the -f option is given,\n"
+#~ "    the NAMEs refer to functions.  If no NAMEs are given, or if `-p'\n"
+#~ "    is given, a list of all names that are exported in this shell is\n"
+#~ "    printed.  An argument of `-n' says to remove the export property\n"
+#~ "    from subsequent NAMEs.  An argument of `--' disables further option\n"
+#~ "    processing."
+#~ msgstr ""
+#~ "N�ZVY jsou ozna�eny pro automatické exportování do prostředí následně\n"
+#~ "    prováděných příkazů. Je-li zadán přepína� -f, N�ZVY se vztahují "
+#~ "k funkcím.\n"
+#~ "    Nejsou-li zadány žádné N�ZVY nebo je-li zadáno „-p“, bude vytištěn "
+#~ "seznam\n"
+#~ "    všech názvů, které jsou v tomto shellu exportovány. Argument „-n“ "
+#~ "nařizuje\n"
+#~ "    odstranit vlastnost exportovat z následujících N�ZVŮ. Argument „--“\n"
+#~ "    zakazuje zpracování dalších přepína�ů."
+
+#~ msgid ""
+#~ "The given NAMEs are marked readonly and the values of these NAMEs may\n"
+#~ "    not be changed by subsequent assignment.  If the -f option is given,\n"
+#~ "    then functions corresponding to the NAMEs are so marked.  If no\n"
+#~ "    arguments are given, or if `-p' is given, a list of all readonly "
+#~ "names\n"
+#~ "    is printed.  The `-a' option means to treat each NAME as\n"
+#~ "    an array variable.  An argument of `--' disables further option\n"
+#~ "    processing."
+#~ msgstr ""
+#~ "Zadané N�ZVY budou ozna�eny jako jen pro �tení a hodnoty těchto N�ZVŮ\n"
+#~ "    nebude možné změnit následným přiřazením. Je-li zadán přepína� -f, "
+#~ "pak\n"
+#~ "    funkce těchto N�ZVŮ budou takto ozna�eny. Nejsou-li zadány žádné "
+#~ "argumenty\n"
+#~ "    nebo je-li zadáno „-p“, bude vytištěn seznam všech jmen jen pro "
+#~ "�tení.\n"
+#~ "    Přepína� „-a“ znamená, že s každým N�ZVEM bude zacházeno jako "
+#~ "s proměnnou\n"
+#~ "    typu pole. Argument „--“ zakáže zpracování dalších přepína�ů."
+
+#~ msgid ""
+#~ "The positional parameters from $N+1 ... are renamed to $1 ...  If N is\n"
+#~ "    not given, it is assumed to be 1."
+#~ msgstr ""
+#~ "Pozi�ní parametry budou přejmenovány z $N+1 na $1 atd. Není-li N zadáno,\n"
+#~ "    předpokládá se 1."
+
+#~ msgid ""
+#~ "Suspend the execution of this shell until it receives a SIGCONT\n"
+#~ "    signal.  The `-f' if specified says not to complain about this\n"
+#~ "    being a login shell if it is; just suspend anyway."
+#~ msgstr ""
+#~ "Pozastaví provádění tohoto shellu do doby, něž bude obdržen signál\n"
+#~ "    SIGCONT. „-f“, je-li zadán, potla�í stížnost na to, že se jedná\n"
+#~ "    o přihlašovací shell (pokud tomu tak je), a prostě pozastaví �innost."
+
+#~ msgid ""
+#~ "Print the accumulated user and system times for processes run from\n"
+#~ "    the shell."
+#~ msgstr ""
+#~ "Vypíše celkovou dobu procesu spuštěného z shellu, kterou strávil\n"
+#~ "    v uživatelském a jaderném (system) prostoru."
+
+#~ msgid ""
+#~ "For each NAME, indicate how it would be interpreted if used as a\n"
+#~ "    command name.\n"
+#~ "    \n"
+#~ "    If the -t option is used, `type' outputs a single word which is one "
+#~ "of\n"
+#~ "    `alias', `keyword', `function', `builtin', `file' or `', if NAME is "
+#~ "an\n"
+#~ "    alias, shell reserved word, shell function, shell builtin, disk "
+#~ "file,\n"
+#~ "    or unfound, respectively.\n"
+#~ "    \n"
+#~ "    If the -p flag is used, `type' either returns the name of the disk\n"
+#~ "    file that would be executed, or nothing if `type -t NAME' would not\n"
+#~ "    return `file'.\n"
+#~ "    \n"
+#~ "    If the -a flag is used, `type' displays all of the places that "
+#~ "contain\n"
+#~ "    an executable named `file'.  This includes aliases, builtins, and\n"
+#~ "    functions, if and only if the -p flag is not also used.\n"
+#~ "    \n"
+#~ "    The -f flag suppresses shell function lookup.\n"
+#~ "    \n"
+#~ "    The -P flag forces a PATH search for each NAME, even if it is an "
+#~ "alias,\n"
+#~ "    builtin, or function, and returns the name of the disk file that "
+#~ "would\n"
+#~ "    be executed."
+#~ msgstr ""
+#~ "O každém N�ZVU řekne, jak by byl interpretován, kdyby byl použit jako\n"
+#~ "    název příkazu.\n"
+#~ "    \n"
+#~ "    Je-li použit přepína� -t, „type“ vypíše jedno slovo z těchto: "
+#~ "„alias“,\n"
+#~ "    „keyword“, „function“, „builtin“, „file“ nebo „“, je-li N�ZEV alias,\n"
+#~ "    klí�ové slovo shellu, shellová funkce, vestavěný příkaz shellu, "
+#~ "soubor\n"
+#~ "    na disku nebo nenalezený soubor.\n"
+#~ "    \n"
+#~ "    Je-li použit přepína� -p, „type“ bu� vrátí jméno souboru na disku, "
+#~ "který\n"
+#~ "    by byl spuštěn, nebo nic, pokud „type -t N�ZEV“ by nevrátil „file“.\n"
+#~ "    \n"
+#~ "    Je-li použit přepína� -a, „type“ zobrazí všechna místa, kde se "
+#~ "nalézá\n"
+#~ "    spustitelný program pojmenovaný „soubor“. To zahrnuje aliasy, "
+#~ "vestavěné\n"
+#~ "    příkazy a funkce jen a pouze tehdy, když není rovněž použit přepína� -"
+#~ "p.\n"
+#~ "    \n"
+#~ "    Přepína� -f potla�í hledání mezi funkcemi shellu.\n"
+#~ "    \n"
+#~ "    Přepína� -P vynutí prohledání PATH na každý N�ZEV, dokonce i když se\n"
+#~ "    jedná o alias, vestavěný příkaz nebo funkci, a vrátí název souboru "
+#~ "na\n"
+#~ "    disku, který by byl spuštěn."
+
+#~ msgid ""
+#~ "The user file-creation mask is set to MODE.  If MODE is omitted, or if\n"
+#~ "    `-S' is supplied, the current value of the mask is printed.  The `-"
+#~ "S'\n"
+#~ "    option makes the output symbolic; otherwise an octal number is "
+#~ "output.\n"
+#~ "    If `-p' is supplied, and MODE is omitted, the output is in a form\n"
+#~ "    that may be used as input.  If MODE begins with a digit, it is\n"
+#~ "    interpreted as an octal number, otherwise it is a symbolic mode "
+#~ "string\n"
+#~ "    like that accepted by chmod(1)."
+#~ msgstr ""
+#~ "Uživatelská maska práv vytvářených souborů je nastavena na MÓD. Je-li\n"
+#~ "    MÓD vynechán nebo je-li uvedeno „-S“, bude vytištěna sou�asná "
+#~ "hodnota\n"
+#~ "    masky. Přepína� „-S“ u�iní výstup symbolický, jinak bude výstupem\n"
+#~ "    osmi�kové �íslo. Je-li zadáno „-p“ a MÓD je vynechán, bude výstup ve\n"
+#~ "    formátu, který lze použít jako vstup. Za�íná-li MÓD �íslicí, bude\n"
+#~ "    interpretován jako osmi�kové �íslo, jinak jako řetězec symbolického "
+#~ "zápisu\n"
+#~ "    práv tak, jak jej chápe chmod(1)."
+
+#~ msgid ""
+#~ "Wait for the specified process and report its termination status.  If\n"
+#~ "    N is not given, all currently active child processes are waited for,\n"
+#~ "    and the return code is zero.  N is a process ID; if it is not given,\n"
+#~ "    all child processes of the shell are waited for."
+#~ msgstr ""
+#~ "Po�ká na zadaný proces a nahlásí jeho návratový kód. Není-li N zadáno,\n"
+#~ "    bude se �ekat na všechny právě aktivní procesy potomků a návratová "
+#~ "hodnota\n"
+#~ "    bude nula. N je ID procesu. Není-li zadáno, bude se �ekat na všechny\n"
+#~ "    procesy potomků tohoto shellu."
+
+#~ msgid ""
+#~ "Create a simple command invoked by NAME which runs COMMANDS.\n"
+#~ "    Arguments on the command line along with NAME are passed to the\n"
+#~ "    function as $0 .. $n."
+#~ msgstr ""
+#~ "Vytvoří jednoduchý příkaz volaný JMÉNEM, který spustí PŘ�KAZY. Argumenty\n"
+#~ "    z příkazové řádky spolu se JMÉNEM budou předány do funkce jako $0…$n."
+
+#~ msgid ""
+#~ "Toggle the values of variables controlling optional behavior.\n"
+#~ "    The -s flag means to enable (set) each OPTNAME; the -u flag\n"
+#~ "    unsets each OPTNAME.  The -q flag suppresses output; the exit\n"
+#~ "    status indicates whether each OPTNAME is set or unset.  The -o\n"
+#~ "    option restricts the OPTNAMEs to those defined for use with\n"
+#~ "    `set -o'.  With no options, or with the -p option, a list of all\n"
+#~ "    settable options is displayed, with an indication of whether or\n"
+#~ "    not each is set."
+#~ msgstr ""
+#~ "Přepne hodnoty proměnných řídící volitelné chování. Přepína� -s znamená,\n"
+#~ "    že se každý N�ZEV_VOLBY zapne (nastaví). Přepína� -u každý "
+#~ "N�ZEV_VOLBY\n"
+#~ "    vypne. Přepína� -q potla�í výstup. Zda je nebo není nastaven každý\n"
+#~ "    N�ZEV_VOLBY, indikuje návratový kód. Přepína� -o omezí N�ZVY_VOLEB na "
+#~ "ty,\n"
+#~ "    které jsou definovány pro použití s „set -o“. Bez přepína�ů nebo\n"
+#~ "    s přepína�em -p je zobrazen seznam všech nastavitelných voleb v�etně\n"
+#~ "    indikace, zda je každá nastavena."
+
+#~ msgid ""
+#~ "For each NAME, specify how arguments are to be completed.\n"
+#~ "    If the -p option is supplied, or if no options are supplied, "
+#~ "existing\n"
+#~ "    completion specifications are printed in a way that allows them to "
+#~ "be\n"
+#~ "    reused as input.  The -r option removes a completion specification "
+#~ "for\n"
+#~ "    each NAME, or, if no NAMEs are supplied, all completion "
+#~ "specifications."
+#~ msgstr ""
+#~ "U každého N�ZVU sdělí, jak budou argumenty doplněny. Je-li zadán\n"
+#~ "    přepína� -p nebo není-li zadán přepína� žádný, budou existující "
+#~ "definice\n"
+#~ "    doplňování vytištěny tak. že je bude možné znovu použít jako vstup.\n"
+#~ "    Přepína� -r odstraní definici doplnění pro každý N�ZEV nebo chybí-li "
+#~ "N�ZVY,\n"
+#~ "    odstraní všechny definice."
diff --git a/po/da.gmo b/po/da.gmo
new file mode 100644
index 0000000..44572c7
--- /dev/null
+++ b/po/da.gmo
diff --git a/po/da.po b/po/da.po
new file mode 100644
index 0000000..09b2cf6
--- /dev/null
+++ b/po/da.po
@@ -0,0 +1,6073 @@
+# Danish translation of bash.
+# Copyright (C) 2008 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+#
+# Kenneth Nielsen <k.nielsen81@gmail.com>, 2009-2011.
+#
+# Oversættelseskonventioner:
+# keymap -> tastetildeling
+# child -> underproces
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: bash 4.2\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2011-03-18 01:36+0100\n"
+"Last-Translator: Kenneth Nielsen <k.nielsen81@gmail.com>\n"
+"Language-Team: Danish <dansk@dansk-gruppen.dk>\n"
+"Language: da\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"X-Generator: KBabel 1.11.4\n"
+"Plural-Forms:  nplurals=2; plural=(n != 1);\n"
+
+# Den er jeg altså ikke helt sikker på
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "ugyldigt arrayindeks"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr ""
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: kan ikke konvertere indekseret til associativt array"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: ugyldig nøgle til associativt array"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: kan ikke tildele til ikkenumerisk indeks"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr "%s: %s: et indeks skal bruges ved tildeling til associativt array"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: kan ikke oprette %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr "bash_execute_unix_command: kan ikke finde tastetildeling for kommando"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: første ikke-blank-tegn er ikke '\"'"
+
+# Kønnet her er et gæt, hvis det er parenteser eller anførselstegn passer det
+# FEJLRAPPORT
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "ingen afsluttende \"%c\" i %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: manglende kolonseparator"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "\"%s\": kan ikke løsne"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr ""
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr ""
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr ""
+
+#: builtins/alias.def:131 variables.c:1844
+#, fuzzy, c-format
+msgid "`%s': invalid alias name"
+msgstr "\"%s\": ugyldigt tastetildelingsnavn"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "linjeredigering ikke slået til"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "\"%s\": ugyldigt tastetildelingsnavn"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: kan ikke læse: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "\"%s\": ukendt funktionsnavn"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s er ikke bundet til nogen taster.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s kan kaldes via "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "\"%s\": kan ikke løsne"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "løkketæller"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "kun meningsfuld i en \"for\"-, \"while\"- eller \"until\"-løkke"
+
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Returnerer konteksten af det nuværende underrutinekald.\n"
+"\n"
+"    Uden UDTRYK returneres \"$line $filename\". Med UDTRYK returneres\n"
+"    \"$line $subroutine $filename\". Den ekstra information\n"
+"    kan bruges til at give at stakspor.\n"
+"\n"
+"    Værdien af UDTRYK angiver hvor mange kalderammer der skal gås tilbage\n"
+"    fra den nuværende. Toprammen er ramme 0.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer 0 med mindre skallen ikke eksekverer en skalfunktion eller "
+"hvis\n"
+"    UDTRYK er ugyldigt."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "HOME ikke indstillet"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "for mange argumenter"
+
+#: builtins/cd.def:342
+#, fuzzy
+msgid "null directory"
+msgstr "ingen anden mappe"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "OLDPWD ikke indstillet"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "linje %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "advarsel: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: brug: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: tilvalg kræver et argument"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: numerisk argument påkrævet"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: ikke fundet"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: ugyldigt tilvalg"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: ugyldigt tilvalgsnavn"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "\"%s\": ikke et gyldigt identificeringsnavn"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "ugyldigt oktaltal"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "ugyldigt heksadecimalt tal"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "ugyldigt tal"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: ugyldig signalspecifikation"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "\"%s\": ikke en pid eller gyldig job-spec"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: skrivebeskyttet variabel"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s udenfor rækkevidde"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "argument"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s udenfor rækkevidde"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: intet sådant job"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: ingen jobkontrol"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "ingen jobkontrol"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: begrænset"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "begrænset"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: ikke indbygget i skallen"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "skrivefejl: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "fejl ved indstilling af terminalattribut: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "fejl ved indhentning af terminalattribut: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: fejl ved indhentning af nuværende mappe: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: tvetydig job-spec"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr ""
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: kan ikke fjerne: skrivebeskyttet %s"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: kan ikke fjerne"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: ugyldigt handlingsnavn"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: ingen fuldførselsspecifikation"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "advarsel: tilvalget -F vil måske ikke virke, som du forventer"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "advarsel: tilvalget -C vil måske ikke virke, som du forventer"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "ikke i gang med at eksekvere fuldførelsesfunktion"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "kan kun bruges i en funktion"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr ""
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr ""
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr ""
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, fuzzy, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "\"%s\": ugyldigt tastetildelingsnavn"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "kan ikke bruge \"-f\" til at lave funktioner"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: skrivebeskyttet funktion"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr ""
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: kan ikke destruere arrayvariabel på denne måde"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: kan ikke konvertere associativt til indekseret array"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "dynamisk indlæsning ikke tilgængelig"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "kan ikke åbne delt objekt %s: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "kan ikke finde %s i delt objekt %s: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: ikke dynamisk indlæst"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr ""
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: ikke dynamisk indlæst"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: kan ikke slette: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: er en mappe"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: ikke en regulær fil"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: fil er for stor"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: kan ikke eksekvere binær fil"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: kan ikke eksekvere: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "log ud\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "ikke en logind-skal: brug \"exit\""
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Der er stoppede job.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Der er kørende job.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "ingen kommando fundet"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "historikspecifikation"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: kan ikke åbne midl. fil: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "nuværende"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "job %d startet uden jobkontrol"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: ugyldigt tilvalg -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: et argument er påkrævet til tilvalget -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "hashing slået fra"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: hash-tabel tom\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "hits\tkommando\n"
+
+# Jeg antager at det sidste ` er det første af et sæt af anførselstegn og
+# det er derfor oversat til "
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Skalkommandoer som matcher nøgleordet \""
+msgstr[1] "Skal-kommandoer som matcher nøgleordene \""
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"ingen hjælpeemner matcher \"%s\". Prøv \"help help\" eller \"man -k %s\" "
+"eller \"info %s\"."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: kan ikke åbne: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Disse skalkommandoer er defineret internt. Skriv \"help\" for at se denne "
+"liste.\n"
+"Skriv \"help navn\" for at finde ud af mere om kommandoen \"navn\".\n"
+"Brug \"info bash\" for at få mere generel information om skallen.\n"
+"Brug \"man -k\" eller \"info\" for at finde ud af mere om kommandoer som "
+"ikke er \n"
+"på listen.\n"
+"\n"
+"En stjerne (*) ved siden af et navn betyder at kommandoen er slået fra.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "kan ikke bruge mere end en af -anrw"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "historikposition"
+
+#: builtins/history.def:340
+#, fuzzy, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: ugyldigt tilvalgsnavn"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: historikudvidelse fejlede"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: inlib fejlede"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "ingen andre tilvalg er tilladt sammen med \"-x\""
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: argumenter skal være processer eller job-id'er"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Ukendt fejl"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "forventede et udtryk"
+
+#: builtins/mapfile.def:178
+#, fuzzy, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: ikke en arrayvariabel"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: ugyldig filbeskrivelsesspecifikation"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: ugyldig filbeskrivelse: %s"
+
+# -c     Specify the number of lines read between each call to callback.
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: ugyldigt antal linjer"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: ugyldig array-startindeks"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: ugyldigt tilbagekaldskvantum"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "tomt arrayvariabelnavn"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "understøttelse af arrayvariabel påkrævet"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "\"%s\": manglende formattegn"
+
+#: builtins/printf.def:474
+#, fuzzy, c-format
+msgid "`%c': invalid time format specification"
+msgstr "%s: ugyldig specifikation af tidsudløb"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "\"%c\": ugyldigt formattegn"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "advarsel: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr ""
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "manglende heksciffer for \\x"
+
+#: builtins/printf.def:900
+#, fuzzy, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "manglende heksciffer for \\x"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "ingen anden mappe"
+
+#: builtins/pushd.def:360
+#, fuzzy, c-format
+msgid "%s: invalid argument"
+msgstr "%s: ugyldigt grænseargument"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<ingen nuværende mappe>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "mappestak tom"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "mappestakindeks"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Viser listen af huskede mapper. Mapper tilføjes til listen med\n"
+"    \"pushd\"-kommandoen. Du kan komme tilbage i listen med \"popd\"-\n"
+"    kommandoen.\n"
+"\n"
+"    Valgmuligheder:\n"
+"      -c\tryd mappestakken ved at slette alle elementerne\n"
+"      -l\tvis ikke \"tildepræfiksede\" versioner af mapper relativt\n"
+"        til din hjemmemappe\n"
+"      -p\tvis mappestakken med et element per linje\n"
+"      -v\tvis mappestakken med et element per linje, præfikset med\n"
+"        med dets position i stakken\n"
+"    \n"
+"    Argumenter:\n"
+"      +N\tViser det N'te element, talt fra venstre af og vist mappevis\n"
+"        når der ikke angives nogle valgmuligheder, startende fra 0.\n"
+"    \n"
+"      -N\tViser det N'te element, talt fra venstre af og vist mappevis\n"
+"        når der ikke angives nogle valgmuligheder, startende fra 0."
+
+# Jeg tror der er en fejl i den engelske, fejlrapport
+#: builtins/pushd.def:723
+#, fuzzy
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Tilføjer en mappe til toppen af mappestakken, eller roterer stakken\n"
+"    således at den nye top bliver den aktuelle mappe. Uden\n"
+"    argumenter ombyttes de to øverste mapper.\n"
+"    \n"
+"    Valgmuligheder:\n"
+"      -n\tUndertrykker det normale mappeskift ved tilføjelse\n"
+"    \taf mapper til stakken, således at kun stakken manipuleres.\n"
+"    \n"
+"    Argumenter:\n"
+"      +N\tRoterer stakken således at det N'te element (talt\n"
+"    \tfra venstre af listen som vist af \"dirs\", startende med nul)\n"
+"    \tbliver placeret i toppen.\n"
+"    \n"
+"      -N\tRoterer stakken således at det N'te element (talt\n"
+"    \tfra højre af listen som vist af \"dirs\", startende med nul)\n"
+"    \tbliver placeret i toppen.\n"
+"    \n"
+"      dir\tTilføjer DIR til toppen af mappestakken, således at den\n"
+"    \tbliver den nye aktive mappe.\n"
+"    \n"
+"Den indbyggede funktion \"dirs\" viser mappestakken."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Fjerner en mappe fra toppen af mappestakken. Uden argumenter fjernes\n"
+"    den øverste mappe fra stakken og der skiftes til den nye øverste mappe.\n"
+"    \n"
+"    Valgmuligheder:\n"
+"      -n\tUndertrykker det normale mappeskift ved fjernelse\n"
+"    \taf mapper fra stakken, således at kun stakken manipuleres.\n"
+"    \n"
+"    Argumenter:\n"
+"      +N\tFjerner det N'te element, talt fra venstre af listen\n"
+"    \tsom vist af \"dirs\", startende med nul. F.eks: vil \"popd +0\"\n"
+"    \tfjerne det øverste argument og \"popd +1\" det andet.\n"
+"    \n"
+"      -N\tFjerner det N'te element, talt fra højre af listen\n"
+"    \tsom vist af \"dirs\", startende med nul. F.eks: vil \"popd -0\"\n"
+"    \tfjerne det sidste argument og \"popd -1\" det andetsidste.\n"
+"    \n"
+"Den indbyggede funktion \"dirs\" viser mappestakken."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: ugyldig specifikation af tidsudløb"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "læsefejl: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr "kan kun udføre \"return\" fra en funktion eller indlæst skript"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "kan ikke fjerne en funktion og en variabel samtidig"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: ikke en arrayvariabel"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: ikke en funktion"
+
+#: builtins/setattr.def:194
+#, fuzzy, c-format
+msgid "%s: cannot export"
+msgstr "%s: kan ikke fjerne"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "skifttæller"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "kan ikke indstille og fjerne skaltilvalg samtidig"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: ugyldigt navn for skaltilvalg"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "filnavnsargument påkrævet"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: fil ikke fundet"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "kan ikke sætte i hvile"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "kan ikke sætte en logindskal i hvile"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s er aliasset til \"%s\"\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s er et skalnøgleord\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s er en funktion\n"
+
+#: builtins/type.def:299
+#, fuzzy, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s er indbygget i skallen\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s er indbygget i skallen\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s er %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s er hashet (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: ugyldigt grænseargument"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "\"%c\": ugyldig kommando"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: kan ikke indhente grænse: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "grænse"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: kan ikke modificere grænse: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "oktalt tal"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "\"%c\": ugyldig symbolsk tilstandsoperator"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "\"%c\": ugyldigt symbolsk tilstandstegn"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " linje "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "sidste kommando: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Afbryder..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr ""
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "ukendt kommandofejl"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "ugyldig kommandotype"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "dårligt mellemled"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "dårligt hop"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: ubundet variabel"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\atidsudløb mens der ventedes på input: auto-logud\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "kan ikke videresende standardinput fra /dev/null: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "TIMEFORMAT: \"%c\": ugyldigt formateringstegn"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr ""
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "datakanalfejl (pipe error)"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: begrænset: kan ikke specificere \"/\" i kommandonavne"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: kommando ikke fundet"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr ""
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: dårlig fortolker"
+
+#: execute_cmd.c:5891
+#, fuzzy, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: kan ikke eksekvere binær fil"
+
+#: execute_cmd.c:5977
+#, fuzzy, c-format
+msgid "`%s': is a special builtin"
+msgstr "%s er indbygget i skallen\n"
+
+#    Process Substitution
+#        Process substitution is supported on systems that support  named  pipes
+#        (FIFOs)  or the /dev/fd method of naming open files.  It takes the form
+#        of <(list) or >(list).  The process list is run with its input or  out�
+#        put connected to a FIFO or some file in /dev/fd.  The name of this file
+#        is passed as an argument to the current command as the  result  of  the
+#        expansion.   If the >(list) form is used, writing to the file will pro�
+#        vide input for list.  If the <(list) form is used, the file  passed  as
+#        an argument should be read to obtain the output of list.
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "kan ikke duplikere fd %d til fd %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "grænse for rekursion af udtryk overskredet"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "underløb i rekursionsstak"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "syntaksfejl i udtryk"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "forsøgte tildeling til ikke-variabel"
+
+#: expr.c:530
+#, fuzzy
+msgid "syntax error in variable assignment"
+msgstr "syntaksfejl i udtryk"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "division med 0"
+
+# denne her streng er dårlig på så mange måder at det fatter man slet ikke. Skal bug oversætter og hvad er expassign. Jeg laver et bud og har fejlmeldt den
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "bug: dårligt expassign-udtryk"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "\":\" forventet for betingede udtryk"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "eksponent mindre end 0"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "identifikator forventet efter præforøgelse eller -formindskelse"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "manglende \")\""
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "syntaksfejl: operand forventet"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "syntaksfejl: ugyldig aritmetisk operator"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (fejlelement er \"%s\")"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "ugyldig aritmetisk grundtal"
+
+# -c     Specify the number of lines read between each call to callback.
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: ugyldigt antal linjer"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "værdi for stor til grundtal"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: fejl i udtryk\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: kan ikke tilgå overliggende mapper"
+
+# Har ladet nodelay stå, idet jeg gætter på at det er et navn
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "kan ikke nulstille \"nodelay\"-tilstand for fd %d"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr "kan ikke allokere ny fildeskriptor til bash-input fra fd %d"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input: buffer eksisterer allerede til ny fd %d"
+
+# ??
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: pgrp-datakanal (pipe)"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "forgrenet pid %d figurerer i kørende job %d"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "sletter stoppet job %d med procesgruppe %ld"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process: pid %5ld (%s) markeret som stadig i live"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: ingen process med det pid"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Signal %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Færdig"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Stoppet"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Stoppet(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "Kører"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Færdig(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Afslut %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Ukendt status"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(smed kerne) "
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (wd: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "underproces setpgid (%ld til %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: pid %ld er ikke en underproces af denne skal"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: Ingen optegnelse af proces %ld"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: job %d er stoppet"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: intet sådant job"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: job er afbrudt"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: job %d er allerede i baggrunden"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr ""
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: linje %d: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (smed kerne)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(wd nu: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: getpgrp fejlede"
+
+#: jobs.c:4447
+#, fuzzy
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: linjedisciplin"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: linjedisciplin"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "kan ikke indstille terminal-procesgruppe (%d)"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "ingen jobkontrol i denne skal"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: forfejlet hævdelse: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d: hævdelse forkludret\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "ukendt"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: blok i fri liste tværet ud"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: kaldt med blokargument som allerede er fri"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: kaldt med ikke-allokeret blokargument"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: underløb detekteret, mh_nbytes uden for interval"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: underløb detekteret, mh_nbytes uden for interval"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: størrelse på start- og slut-bid afviger"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: kaldt med ikke-allokeret blokargument"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc: underløb detekteret, mh_nbytes uden for interval"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc: underløb detekteret, mh_nbytes uden for interval"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: størrelse på start- og slut-bid afviger"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: alloc-tabel er fyldt med FIND_ALLOC?\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: %p allerede i tabel som allokeret?\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: %p allerede i tabel som fri?\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "ugyldig base"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: vært ukendt"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: ugyldig tjeneste"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: dårlig specifikation for netværkssti"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "netværksoperation ikke understøttet"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr ""
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr ""
+
+#: locale.c:292
+#, fuzzy, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "xrealloc: %s:%d: kan ikke allokere %lu bytes"
+
+#: locale.c:294
+#, fuzzy, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "xrealloc: %s:%d: kan ikke allokere %lu bytes"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "Du har post i $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "Du har ny post i $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "Posten i %s er blevet læst\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "syntaksfejl: aritmetisk udtryk påkrævet"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "syntaksfejl: \";\" uventet"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "syntaksfejl: \"((%s))\""
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: dårlig instruktionstype %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr ""
+"here-document ved linje %d er adskilt af slut-på-linje (ønskede \"%s\")"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr "make_direction: videresendelsesinstruktion \"%d\" uden for interval"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr ""
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "uventet EOF mens der ledtes efter samhørende \"%c\""
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "uventet EOF mens der ledtes efter \"]]\""
+
+# word   A sequence of characters considered as  a  single  unit  by  the
+#        shell.  Also known as a token.
+# Jeg har valgt udtryk
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "syntaksfejl i betingelsesudtryk: uventet element \"%s\""
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "syntaksfejl i betingelsesudtryk"
+
+# word   A sequence of characters considered as  a  single  unit  by  the
+#        shell.  Also known as a token.
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "uventet element \"%s\", forventede \")\""
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "forventede \")\""
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "uventet argument \"%s\" til unær betingelsesoperator"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "uventet argument til unær betingelsesoperator"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "uventet udtryk \"%s\", ventede binær betingelsesoperator"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "ventedet binær betingelsesoperator"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "uventet argument \"%s\" til binær betingelsesoperator"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "uventet argument til binær betingelsesoperator"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "uventet udtryk \"%c\" i betingelseskommando"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "uventet udtryk \"%s\" i betingelseskommando"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "uventet udtryk \"%d\" i betingelseskommando"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "syntaksfejl nær uventet udtryk \"%s\""
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "syntaksfejl nær \"%s\""
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "syntaksfejl: uventet slutning på fil"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "syntaksfejl"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Brug \"%s\" for at forlade skallen.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "uventet EOF mens der ledtes efter samhørende \")\""
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "completion: funktion \"%s\" ikke fundet"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr ""
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: NULL COMPSPEC"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: dårligt mellemled \"%d\""
+
+#: print_cmd.c:375
+#, fuzzy, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "%d: ugyldig filbeskrivelse: %s"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr ""
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr ""
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: \"%c\": ugyldigt formateringstegn"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "fil-deskriptor uden for interval"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: tvetydig videresendelse"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: kan ikke overskrive eksisterende fil"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: begrænset: kan ikke videresende output"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "kan ikke danne midlertidig fil til here-dokument: %s"
+
+#: redir.c:222
+#, fuzzy, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: kan ikke tildele liste til arrayelementer"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "/dev/(tcp|udp)/vært/port ikke understøttet uden netværk"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "videresendelsesfejl: kan ikke duplikere fd"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "kan ikke finde /tmp, opret venligst mappen!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp skal være et gyldigt mappenavn"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr ""
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: ugyldigt tilvalg"
+
+# Har ladet nodelay stå, idet jeg gætter på at det er et navn
+#: shell.c:1319
+#, fuzzy, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "kan ikke nulstille \"nodelay\"-tilstand for fd %d"
+
+# Har ladet nodelay stå, idet jeg gætter på at det er et navn
+#: shell.c:1330
+#, fuzzy, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "kan ikke nulstille \"nodelay\"-tilstand for fd %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr ""
+
+#: shell.c:1632
+#, fuzzy, c-format
+msgid "%s: Is a directory"
+msgstr "%s: er en mappe"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "Jeg har ikke noget navn!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, version %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Brug:\t%s [langt GNU-tilvalg] [tilvalg] ...\n"
+"\t%s [langt GNU-tilvalg] [tilvalg] skript-fil ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "Lange GNU-tilvalg:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Skal-tilvalg:\n"
+
+#: shell.c:2043
+#, fuzzy
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-irsD eller -c kommando eller -O shopt_option\t\t(kun programkald)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\tTilvalg -%s eller -o\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+"Skriv \"%s -c \"help set\"\" for at få mere information om skaltilvalg.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr ""
+"Skriv \"%s -c help\" for at få mere information om indbyggede "
+"skalkommandoer.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "Brug kommandoen \"bashbug\" til at rapportere fejl.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr ""
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr ""
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: ugyldig handling"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Falsk signal"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Læg på"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Afbryd"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Afslut"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Ugyldig instruktion"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "BPT-spor/fang"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "ABORT-instruktion"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "EMT-instruktion"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Kommatalsundtagelse"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Slået ihjel"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Bus-fejl"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Segmenteringsfejl"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Ugyldigt systemkald"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Ødelagt datakanal"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Alarmklokke"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Afsluttet"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Presserende IO-forhold"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Stoppet (signal)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Fortsæt"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Død eller stop af underproces"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Stoppet (tty-input)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Stoppet (tty-output)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "I/O klar"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "CPU-grænse"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "Filgrænse"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Alarm (virtuel)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Alarm (profil)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Vindue ændret"
+
+# I fejlrapport for at få meningen
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Optag lås"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Brugersignal 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Brugersignal 2"
+
+# Fejlrapport
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "HFT-inputdata afventer"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "strømsvigt nært forestående"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "systemnedbrud nært forestående"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "flyt proces til en anden CPU"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "programmeringsfejl"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "HFT-skærmtilstand tildelt"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "HFT-skærmtilstand trukket tilbage"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "HFT-lydsekvens er afsluttet"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "Informationsforespørgsel"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "Ukendt signal #%d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "dårlig udskiftning: ingen lukkende \"%s\" i %s"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: kan ikke tildele liste til arrayelementer"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "kan ikke lave datakanal (pipe) til procesudskiftning"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "kan ikke danne underproces til procesudskiftning"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "kan ikke åbne navngiven datakanal (pipe) %s til læsning"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "kan ikke åbne navngiven datakanal (pipe) %s til skrivning"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "kan ikke duplikere navngiven datakanal (pipe) %s som %d"
+
+#: subst.c:6213
+#, fuzzy
+msgid "command substitution: ignored null byte in input"
+msgstr "dårlig udskiftning: ingen lukkende \"`\" i %s"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "kan ikke danne datakanal (pipe) til kommandoudskiftning"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "kan ikke danne underproces til kommandoudskiftning"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute: kan ikke duplikere datakanal (pipe) som fd 1"
+
+#: subst.c:6883 subst.c:9952
+#, fuzzy, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%d: ugyldig filbeskrivelse: %s"
+
+# -c     Specify the number of lines read between each call to callback.
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, fuzzy, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: ugyldigt antal linjer"
+
+#: subst.c:7013 subst.c:7177
+#, fuzzy, c-format
+msgid "%s: invalid variable name"
+msgstr "\"%s\": ugyldigt tastetildelingsnavn"
+
+#: subst.c:7256
+#, fuzzy, c-format
+msgid "%s: parameter not set"
+msgstr "%s: parameter null eller ikke indstillet"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: parameter null eller ikke indstillet"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: understreng-udtryk < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: dårlig udskiftning"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: kan ikke tildele på denne måde"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "dårlig udskiftning: ingen lukkende \"`\" i %s"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "intet match: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "argument forventet"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: heltalsudtryk forventet"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "\")\" forventet"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "\")\" forventet, fandt %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: binær operator forventet"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: unær operator forventet"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "manglende \"]\""
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "syntaksfejl: \";\" uventet"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "ugyldigt signalnummer"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr ""
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: dårlig værdi i trap_list[%d]: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps: signalhåndtering er SIG_DFL, gensender %d (%s) til mig "
+"selv"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: ugyldigt signal %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "fejl under importering af funktionsdefinition for \"%s\""
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "skalniveau (%d) for højt, genindstiller til 1"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: ingen funktionskontekst ved nuværende navneområde"
+
+#: variables.c:2693
+#, fuzzy, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: kan ikke tildele liste til arrayelementer"
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr ""
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: ingen funktionskontekst ved nuværende navneområde"
+
+#: variables.c:4771
+#, fuzzy, c-format
+msgid "%s has null exportstr"
+msgstr "%s: parameter null eller ikke indstillet"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "ugyldigt tegn %d i exportstr for %s"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "intet \"=\" i exportstr for %s"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr "pop_var_context: hoved af shell_variables er ikke en funktionskontekst"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: ingen global_variables-kontekst"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr ""
+"pop_scope: hoved af shell_variables er ikke et midlertidigt miljønavnerum"
+
+#: variables.c:6387
+#, fuzzy, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: kan ikke åbne: %s"
+
+#: variables.c:6392
+#, fuzzy, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%d: ugyldig filbeskrivelse: %s"
+
+#: variables.c:6437
+#, fuzzy, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s udenfor rækkevidde"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Ophavsret (C) 2009 Free Software Foundation, Inc."
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"Licens GPLv3+: GNU GPL version 3 eller senere <http://gnu.org/licenses/gpl."
+"html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, version %s (%s)\n"
+
+#: version.c:91 version2.c:91
+#, fuzzy
+msgid "This is free software; you are free to change and redistribute it."
+msgstr "Dette er fri software; du kan frit ændre eller redistribuere det.\n"
+
+#: version.c:92 version2.c:92
+#, fuzzy
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "Der er INGEN GARANTI i det omfang loven tillader.\n"
+
+#: xmalloc.c:93
+#, fuzzy, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "xmalloc: kan ikke allokere %lu bytes (%lu bytes allokeret)"
+
+#: xmalloc.c:95
+#, fuzzy, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "xmalloc: kan ikke allokere %lu bytes"
+
+#: xmalloc.c:165
+#, fuzzy, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "xmalloc: %s:%d: kan ikke allokere %lu bytes (%lu bytes allokeret)"
+
+#: xmalloc.c:167
+#, fuzzy, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "xmalloc: %s:%d: kan ikke allokere %lu bytes"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [navn[=værdi] ... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] navn [navn ...]"
+
+#: builtins.c:53
+#, fuzzy
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpvsPVS] [-m tastetildeling] [-f filnavn] [-q navn] [-u navn] [-r "
+"nøglesek] [-x nøglesek:skalkommando] [nøglesek:readline-funktion eller "
+"readline-kommando]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [shell-builtin [arg ...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [expr]"
+
+#: builtins.c:66
+#, fuzzy
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|-P] [mappe]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] kommando [arg ...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFilrtux] [-p] [navn[=værdi] ...]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFilrtux] [-p] navn[=værdi] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [tilvalg] navn[=værdi] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [arg ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [arg ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f filnavn] [navn ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [arg ...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts tilvalgsstreng navn [arg]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a navn] [kommando [argumenter ...]] [videresendelse ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+# pat=rep betyder højst sandsynligt mønster=regulært udtryk, men jeg kan ikke finde på nogen 3-bogstavsudtryk som jeg man bruge for de to ting, som jeg synes er let forståelige derfor har jeg ladet dem stå
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr ""
+"fc [-e ename] [-lnr] [første] [sidste] eller fc -s [pat=rep] [kommando]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [job_spec]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [job_spec ...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p stinavn] [-dt] [navn ...]"
+
+#: builtins.c:119
+#, fuzzy
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-ds] [mønster ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d forskydning] [n] eller history -anrw [filnavn] eller "
+"history -ps arg [arg...]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [jobspec ...] eller jobs -x kommando [arger]"
+
+#: builtins.c:131
+#, fuzzy
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [jobspec ...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... eller kill -l "
+"[sigspec]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let arg [arg ...]"
+
+#: builtins.c:138
+#, fuzzy
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a array] [-d adskil] [-i tekst] [-n ntegn] [-p prompt] [-t "
+"tidsgrænse] [-u fd] [navn ...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+#, fuzzy
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [--abefhkmnptuvxBCHP] [-o tilvalgsnavn] [arg ...]"
+
+#: builtins.c:144
+#, fuzzy
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [navn ...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [navn[=værdi] ...] eller export -p"
+
+#: builtins.c:148
+#, fuzzy
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-af] [navn[=værdi] ...] eller readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source filnavn [argumenter]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". filnavn [argumenter]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [udtryk]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ arg... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[arg] signal_spec ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] navn [navn ...]"
+
+#: builtins.c:171
+#, fuzzy
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHacdefilmnpqrstuvx] [grænse]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [tilstand]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [id]"
+
+#: builtins.c:181
+#, fuzzy
+msgid "wait [pid ...]"
+msgstr "wait [pid]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for NAVN [in ORD ... ] ; do KOMMANDOER; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( udtryk1; udtryk2; udtryk3 )); do KOMMANDOER; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select NAVN [in ORD ... ;] do KOMMANDOER; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] datakanal"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case ORD in [MØNSTER [| MØNSTER]...) KOMMANDOER ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if KOMMANDOER; then KOMMANDOER; [ elif KOMMANDOER; then KOMMANDOER; ]... "
+"[ else KOMMANDOER; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while KOMMANDOER; do KOMMANDOER; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until KOMMANDOER; do KOMMANDOER; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [NAVN] kommando [videresendelser]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function navn { KOMMANDOER ; } eller navn () { KOMMANDOER ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ KOMMANDOER ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "job_spec [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( udtryk ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ udtryk ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "variables - Navn og betydning af nogle skalvariable"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | mappe]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [indstnavn ...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v var] format [argumenter]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-o valgmuligheder] [-A handling] [-G "
+"globmønst] [-W ordliste]  [-F funktion] [-C kommando] [-X filtermønst] [-P "
+"præfiks] [-S suffiks] [navn ...]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o valgmuligheder]  [-A handling] [-G globmønst] [-"
+"W ordliste]  [-F funktion] [-C kommando] [-X filtermønst] [-P præfiks] [-S "
+"suffiks] [ord]"
+
+#: builtins.c:239
+#, fuzzy
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o valgmulighed] [navn ...]"
+
+#: builtins.c:242
+#, fuzzy
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-n antal] [-O oprindelse] [-s antal] [-t] [-u fd] [-C tilbagekald] "
+"[-c kvantum] [array]"
+
+#: builtins.c:244
+#, fuzzy
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-n antal] [-O oprindelse] [-s antal] [-t] [-u fd] [-C "
+"tilbagekald] [-c kvantum] [array]"
+
+#: builtins.c:256
+#, fuzzy
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Definer eller vis aliasser.\n"
+"    \n"
+"    Uden argumenter vil \"alias\" udskrive en liste af aliasser på den\n"
+"    genanvendelige form alias NAVN=VÆRDI til standardoutput.\n"
+"    \n"
+"    Ellers vil der blive defineret et alias for hvert NAVN, som der er an-\n"
+"    givet en VÆRDI til. Et efterfølgende mellemrum i VÆRDI vil medføre,\n"
+"    at det næste ord vil blive kontrolleret for alias-udskiftning, når\n"
+"    aliasset udvides.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -p\tUdskriver alle definerede aliasser i et genanvendelig format\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    alias returnerer sand med mindre der gives et NAVN som der ikke er\n"
+"    defineret noget alias for."
+
+#: builtins.c:278
+#, fuzzy
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Fjern hvert NAVN fra listen af definerede aliasser.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -a\tfjern alle aliasdefinitioner.\n"
+"    \n"
+"    Returner succes med mindre et NAVN ikke er et eksisterende alias."
+
+#: builtins.c:291
+#, fuzzy
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"Indstil Readline-tastebindinger og variable.\n"
+"\n"
+"    Bind en tastsekvens til en Readline-funktion eller en makro, eller "
+"indstil\n"
+"    en Readline-variabel. Syntaksen uden tilvalg er ækvivalent til den som\n"
+"    bruges i ~/.inputrc, men skal gives som et enkelt argument:\n"
+"    f.eks. bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -m  tastetildel    Brug TASTETILDEL som tastetildeling for hele \n"
+"                         varigheden af denne kommando. Accepterede "
+"tastetildel-\n"
+"                         ingsnavne er emacs, emacs-standard, emacs-meta,\n"
+"                         emacs-ctlx, vi, vi-move, vi-command og vi-insert.\n"
+"      -l                 Vis liste af funktioner.\n"
+"      -P                 Vis liste af funktionsnavne og bindinger.\n"
+"      -p                 Vis liste af funktionsnavne og bindinger på en "
+"form\n"
+"                         som kan genbruges som input.\n"
+"      -S                 Vis tastesekvenser som udfører makroer og deres "
+"værdier\n"
+"      -s                 Vis tastesekvenser som udfører makroer og deres "
+"værdier\n"
+"                         på en form som kan genbruges som inddata.<\n"
+"      -V                 Vis variabelnavne og -værdier\n"
+"      -v                 Vis variabelnavne og -værdier på en form som kan \n"
+"                         genbruges som inddata.\n"
+"      -q  funktionsnavn  Forespørg hvilke taster der udfører den navngivne \n"
+"                         funktion.\n"
+"      -u  funktionsnavn  Løsn alle taster som er bundet til den navngivne\n"
+"                         funktion.\n"
+"      -r  tastesekv      Fjern bindingen for TASTESEKV.\n"
+"      -f  filnavn        Indlæs tastetildeling fra FILNAVN.\n"
+"      -x  tastesekv:skalkommando\tMedfører at SKALKOMMANDO udføres når \n"
+"    \t\t\t\tTASTESEKV trykkes.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    bind returnerer 0 med mindre et ugenkendt tilvalg angives, eller hvis "
+"der\n"
+"    opstår en fejl."
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Afslut for-, while- eller until-løkker.\n"
+"    \n"
+"    Afslut en FOR, WHILE eller UNTIL-løkke. Hvis N er angivet, afbrydes N\n"
+"    indlejrede løkker.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Afslutningsstatussen er 0 med mindre N ikke er større end eller lig med "
+"1."
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Genoptag for-, while- eller until-løkke.\n"
+"    \n"
+"    Genoptager den næste iteration af den omsluttende FOR-, WHILE- eller \n"
+"    UNTIL-løkke. Hvis N er angivet, genoptages fra den N'te indesluttende "
+"løkke.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Afslutningsstatussen er 0 med mindre N ikke er større end eller lig med "
+"1."
+
+#: builtins.c:354
+#, fuzzy
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Eksekver en skal-indbygget funktion.\n"
+"    \n"
+"    Eksekver en SKAL-INDBYGGET med argumenterne ARGer uden at udføre "
+"kommando-\n"
+"    opslag. Dette er nyttigt, hvis du ønsker et reimplementere en skal-\n"
+"    indbygget som en skalfunktion, men har brug for at eksekvere den "
+"indbyggede\n"
+"    inden i funktionen.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer afslutningsstatussen for den SKAL-INDBYGGEDE, eller falsk "
+"hvis\n"
+"    SKAL-INDBYGGET ikke er en skal-indbygget.."
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Returnerer konteksten af det nuværende underrutinekald.\n"
+"\n"
+"    Uden UDTRYK returneres \"$line $filename\". Med UDTRYK returneres\n"
+"    \"$line $subroutine $filename\". Den ekstra information\n"
+"    kan bruges til at give at stakspor.\n"
+"\n"
+"    Værdien af UDTRYK angiver hvor mange kalderammer der skal gås tilbage\n"
+"    fra den nuværende. Toprammen er ramme 0.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer 0 med mindre skallen ikke eksekverer en skalfunktion eller "
+"hvis\n"
+"    UDTRYK er ugyldigt."
+
+#: builtins.c:387
+#, fuzzy
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"Ændrer skallens aktuelle mappe.\n"
+"    \n"
+"    Ændrer den nuværende mappe til MAPPE. Variablen HOME er standardmappen.\n"
+"    Variablen CDPATH definerer søgestien for mappen som indeholder DIR.\n"
+"    \n"
+"    Variablen CDPATH definerer søgestien for den mappe som indeholder "
+"MAPPE.\n"
+"    Alternative mappenavne i CDPATH er separeret af et kolon (:). Et\n"
+"    null-mappenavn er det samme som den nuværende mappe. Hvis MAPPE "
+"begynder\n"
+"    med en skråstreg (/) bruges CDPATH ikke.\n"
+"\n"
+"    Hvis mappen ikke findes og skalvariablen \"cdabel_vars\" er indstillet,\n"
+"    vil det blive antaget at ordet er et variabelnavn. Hvis variablen har "
+"en\n"
+"    værdi, så bruges denne som MAPPE.\n"
+"\n"
+"    Tilvalg:\n"
+"        -L\tgennemtving at symbolske lænker følges\n"
+"        -P\tbrug den fysiske mappestruktur uden at følge symbolske lænker\n"
+"        \n"
+"    Som standard følges symbolske lænker, som om \"-L\" var valgt.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer 0 hvis mappen ændres, ellers noget forskellig fra 0."
+
+#: builtins.c:425
+#, fuzzy
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"Udskriver navnet for den aktuelle mappe.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -L\tudskriv værdien af $PWD hvis den indeholder den aktuelle mappe\n"
+"      -P\tudskriv den fysiske mappe uden nogen symbolske lænker\n"
+"    \n"
+"    Som standard vil \"pwd\" opføre sig som om \"-L\" var angivet.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer 0 med mindre der er angivet et ugyldigt tilvalg, eller hvis "
+"den\n"
+"    aktuelle mappe ikke kan læses."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Null-kommando.\n"
+"    \n"
+"    Ingen effekt, kommandoen gør intet.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Afsluttes altid succesfuldt."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Returnerer et succesfuldt resultat.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Afsluttes altid succesfuldt."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Returnerer et mislykket resultat.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Afsluttes altid mislykket."
+
+#: builtins.c:471
+#, fuzzy
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Eksekverer en simpel kommando eller viser information om kommandoer.\n"
+"    \n"
+"    Kører KOMMANDO med ARGer med undertrykkelse af skalfunktionsopslag, "
+"eller\n"
+"    vis information om de angivne KOMMANDOER. Kan bruges til at køre "
+"kommandoer\n"
+"    fra disken, når en funktion af samme navn eksisterer.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -p\tbrug en standardværdi for PATH som med garanti vil finde alle\n"
+"    \tstandardværktøjerne\n"
+"      -v\tudskriv en beskrivelse af KOMMANDO, i stil med den skal-\n"
+"    \tindbyggede \"type\"\n"
+"      -V\tUdskriv en større beskrivelse af hver kommando\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer afslutningsstatus fra KOMMANDO eller mislykket hvis KOMMANDO\n"
+"    ikke findes."
+
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"Indstil variabelværdier og -attributter\n"
+"    \n"
+"    Erklær variable og giv dem attributter. Hvis der ikke angives nogen "
+"NAVNE,\n"
+"    så angives attributter og værdier for alle variable.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -f\tbegræns handling eller visning til funktionsnavne og\n"
+"    \tdefinitioner\n"
+"      -F\tbegræns visning til funktionsnavne (inklusive linjenummer og\n"
+"    \tkildekodefil under fejlsøgning)\n"
+"      -p\tvis attributter og værdi for hvert NAVN\n"
+"      \n"
+"    Tilvalg som indstiller attributter:\n"
+"      -a\tfor at gøre NAVNE til indekserede arrays (hvis understøttet)\n"
+"      -A\tfor at gøre NAVNE til associerede arrays (hvis understøttet)\n"
+"      -i\tfor at give NAVNE \"integer\"-attributten\n"
+"      -l\tkonverter NAVNE til små bogstaver ved tildeling\n"
+"      -t\tfor at give NAVNE \"trace\"-attributten\n"
+"      -u\tkonverter NAVNE til store bogstaver ved tildeling\n"
+"      -x\tfor at eksportere NAVNE\n"
+"    \n"
+"    Brug \"+\" i stedet for \"-\" for at slå den pågældende attribut fra.\n"
+"    \n"
+"    Der vil blive udført en aritmetisk evaluering (se \"let\"-kommandoen) "
+"af \n"
+"    variable med integer-attributten, når de tildeles en værdi.\n"
+"    \n"
+"    Når de bliver brugt i en funktion, kan \"declare\" bruges til at gøre "
+"NAVNE\n"
+"    lokale, ligesom med \"local\"-kommandoen.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer succes med mindre der angives et ugyldigt tilvalg, eller "
+"hvis\n"
+"    der opstår en fejl."
+
+#: builtins.c:532
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"Indstil variabelværdier og -attributter.\n"
+"    \n"
+"    Forældet. Læs i \"help declare\"."
+
+#: builtins.c:540
+#, fuzzy
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Definer lokale variable.\n"
+"    \n"
+"    Opret en lokal variabel med navnet NAVN og tildel den en værdi. TILVALG "
+"kan\n"
+"    være alle tilvalg som accepteres af \"declare\".\n"
+"    \n"
+"    Lokale variable kan kun bruges inden i en funktion; de er kun synlige, "
+"for\n"
+"    den funktion de er defineret i og dens underfunktioner.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer succes med mindre der angives et ugyldigt tilvalg, hvis der\n"
+"    opstår en fejl, eller hvis skallen ikke eksekverer en funktion."
+
+#: builtins.c:557
+#, fuzzy
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Skriv argumenter til standardoutput.\n"
+"    \n"
+"    Vis ARGer fra standardoutput, efterfulgt af et nylinjetegn.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -n        vedhæft ikke nylinjetegn\n"
+"      -e        aktiver fortolkning af de følgende undvigesekvenser med\n"
+"        omvendt skråstreg\n"
+"      -E\tundertryk eksplicit fortolkningen af undvigesekvenser med\n"
+"    \tomvendt skråstreg\n"
+"\n"
+"    \"echo\" fortolker følgende undvigesekvenser med omvendt skråstreg\n"
+"      \\a\talarm (klokke)\n"
+"      \\b\ttilbageryk (backspace)\n"
+"      \\c\tundertryk yderligere output\n"
+"      \\e\tescape-tegn\n"
+"      \\f\tsideskift (form feed)\n"
+"      \\n\tny linje\n"
+"      \\r\tlinjeskift (carrige return)\n"
+"      \\t\thorisontalt tab\n"
+"      \\v\tvertikalt tab\n"
+"      \\\\\tomvendt skråstreg\n"
+"      \\0nnn\tdet tegn hvis ASCII-kode er NNN (oktalt). NNN kan have 0-3\n"
+"    \toktale cifre\n"
+"      \\xHH\tdet 8 bit tegn hvis værdi er HH (heksadecimalt). HH kan have\n"
+"    \tet eller to heksadecimale cifre\n"
+"        \n"
+"      Afslutningsstatus:\n"
+"      Returnerer succes med mindre der opstår en skrivefejl."
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Skriv argumenter til standardoutput.\n"
+"    \n"
+"    Vis ARGer til standard output, efterfulgt af et nylinjetegn.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -n\tvedhæft ikke et nylinjetegn\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer succes med mindre der opstår en skrivefejl."
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"Aktiver og deaktiver skal-indbyggede.\n"
+"    \n"
+"    Aktiverer og deaktiverer indbyggede skalkommandoer. Deaktivering "
+"tillader\n"
+"    dig at udføre diskkommandoer, som har det sammen navn som en skal-"
+"indbygget\n"
+"    uden at bruge et fuldt stinavn.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -a\tudskriver en liste over indbyggede, uanset om de er slået til\n"
+"      -n\tdeaktiver hvert NAVN eller vis en liste af deaktiverede funk-\n"
+"    \ttioner\n"
+"      -p\tudskriv en liste over indbyggede i et genanvendeligt format\n"
+"      -s\tudskriv kun navne for \"specielle\" Posix-indbyggede\n"
+"    \n"
+"    Tilvalg som kontrollerer dynamisk indlæsning:\n"
+"      -f\tIndlæs indbygget NAVN fra det delte objekt FILNAVN\n"
+"      -d\tFjern en indbygget indlæst med -f\n"
+"    \n"
+"    Uden tilvalg bliver hvert NAVN aktiveret.   \n"
+"    \n"
+"    Skriv \"enable -n test\" for at bruge den \"test\" som findes i $PATH, i "
+"stedet\n"
+"    for den indbyggede version.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer succes med mindre NAVN ikke er en skal-indbygget eller hvis\n"
+"    der opstår en fejl."
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Eksekver argumenter som en skalkommando.\n"
+"    \n"
+"    Kombinerer ARGer til en enkelt streng, brug resultatet som input til "
+"skallen\n"
+"    og udfør den resulterende kommando.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer kommandoens afslutningsstatus eller succes hvis kommandoen "
+"er\n"
+"    null."
+
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"Fortolkning af tilvalgsargumenter\n"
+"    \n"
+"    Getopts bruges af skalprocedurer til at tolke positionsparametre og\n"
+"    tilvalg.\n"
+"    \n"
+"    OPTSTRING indeholder de tilvalg, som skal genkendes. Hvis et bogstav\n"
+"    følges af et kolon, forventes det at tilvalget har et argument, som\n"
+"    skal adskilles fra tilvalget med et mellemrum.\n"
+"    \n"
+"    Hver gang getopts kaldes, vil den placere det næste tilvalg i skal-\n"
+"    variablen $name, og initialisere $name, hvis den ikke eksisterer, og\n"
+"    putte indekset for det næste argument, som skal behandles, ind i\n"
+"    skalvariablen OPTIND. OPTIND initialiseres til 1 hver gang skallen\n"
+"    eller et skalskript kaldes. Hvis tilvalget kræver et argument, vil\n"
+"    getopts placere argumentet i skalvariablen OPTARG.\n"
+"    \n"
+"    getopts rapporterer fejl på en af to forskellige måder. Hvis det\n"
+"    første tegn i OPTSTRENG er et kolon, vil getopts bruge stille fejl-\n"
+"    rapportering. I denne tilstand vil fejlbeskeder ikke blive\n"
+"    udskrevet. Hvis der angives et ugyldigt tilvalg, vil getopts placere\n"
+"    tilvalgstegnet i OPTARG. Hvis et påkrævet argument ikke bliver\n"
+"    fundet, vil getopts placere et \":\" i NAVN og sætte OPTARG til det\n"
+"    fundne tilvalgstegn. Hvis getopts ikke er i stille tilstand og der\n"
+"    angives et ugyldigt tilvalg, vil getopts placere \"?\" i NAVN og\n"
+"    fjerne (unset) OPTARG. Hvis et påkrævet argument ikke findes, vil\n"
+"    der blive placeret et \"?\" i NAVN og OPTARG vil blive fjernet\n"
+"    (unset) og en diagnosebesked vil blive udskrevet.\n"
+"    \n"
+"    Hvis skalvariablen OPTERR har værdien 0, vil udskrivningen af fejl-\n"
+"    beskeder blive slået fra i getopts, også selv om det første tegn i\n"
+"    OPTSTRING ikke er et kolon. OPTERR har værdien 1 som standard.\n"
+"    \n"
+"    Normalt vil getopts tolke de positionelle parametre ($0 - $9), men\n"
+"    hvis der angives flere argumenter end dette, vil de blive tolket i\n"
+"    stedet for.\n"
+"    \n"
+"    Afslutningsstatus\n"
+"    Returnerer succes hvis et tilvalg findes, fejler hvis afslutningen\n"
+"    af tilvalgene nås eller hvis der opstår en fejl."
+
+#: builtins.c:694
+#, fuzzy
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"Erstat skallen med den angivne kommando.\n"
+"    \n"
+"    Eksekver KOMMANDO og erstat derved skallen med det angivne program.\n"
+"    ARGUMENTER bliver argumenter til KOMMANDO. Hvis KOMMANDO ikke angives "
+"vil\n"
+"    alle omdirigeringer træde i kraft i den aktuelle skal.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -a\tnavn\tangiv NAVN som det nulte argument til KOMMANDO\n"
+"      -c\t\teksekver KOMMANDO i et tomt miljø\n"
+"      -l\t\tbrug en bindestreg som det nulte argument til KOMMANDO\n"
+"    \n"
+"    Hvis kommandoen ikke kan eksekveres, vil ikke-interaktive skaller "
+"afsluttes,\n"
+"    med mindre skal-tilvalget \"execfail\" angives\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Afsluttes succesfuldt med mindre KOMMANDO ikke kan findes, eller hvis "
+"der\n"
+"    opstår en omdirigeringsfejl."
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Afslut skallen.\n"
+"    \n"
+"    Afslut skallen med status N. Hvis N udelades vil afslutningsstatus\n"
+"    blive den samme som sidst eksekverede kommando."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Afslut en logindskal.\n"
+"    \n"
+"    Afslutter en logindskal med afslutningsstatus N. Returnerer en fejl, "
+"hvis\n"
+"    den ikke eksekveres i en logindskal."
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"Vis og eksekver kommandoer fra historiklisten.\n"
+"    \n"
+"    fc bruges til at vise, redigere og geneksekvere kommandoer fra "
+"historikken.\n"
+"    FØRSTE og SIDSTE kan være numre som specificerer et interval, eller "
+"FØRSTE\n"
+"    kan være en streng, hvilket vil resultere i den nyeste kommando som\n"
+"    begynder med den streng.\n"
+"    \n"
+"    Tilvalg:    \n"
+"       -e ENAVN\tvælger hvilket tekstredigeringsprogram, der vil bliver "
+"brugt.\n"
+"          Forvalget er FCEDIT, herefter EDITOR og til sidst \"vi\".\n"
+"       -l \tbetyder vis linjer i stedet for at redigere dem.\n"
+"       -n\tbetyder at linjenumre ikke vises.\n"
+"       -r\tbetyder at rækkefølgen af linjer vendes (så nye er først).\n"
+"       \n"
+"    Med \"fc -s [pat=rep ...] [command]\"-formatet vil kommandoen blive "
+"gen-\n"
+"    eksekveret efter substitutionen GAMMEL=NY er foretaget.\n"
+"    \n"
+"    Et nyttigt alias er r=\\\"fc -s\\\", som vil medføre at den sidste "
+"kommando\n"
+"    der begynder med \\\"cc\\\" vil afvikles, når der skrives \\\"r cc\\\", "
+"og at\n"
+"    den seneste kommando afvikles, når der skrives \\\"r\\\".\n"
+"\n"
+"    Afslutningsstatus.\n"
+"    Returnerer succes eller status af den eksekverede kommando, ikke-nul "
+"hvis\n"
+"    der opstod en fejl."
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Flyt jobs til forgrunden.\n"
+"    \n"
+"    Placer JOB_SPEC i forgrunden og gør det til det aktuelle job. Hvis\n"
+"    JOB_SPEC ikke findes, vil skallens opfattelse af, hvad der er det "
+"nuværende\n"
+"    job, blive brugt.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Status af den kommando der placeres i forgrunden eller mislykket hvis "
+"der\n"
+"    opstår fejl."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Flyt jobs til baggrunden\n"
+"    \n"
+"    Placer hvert enkelt JOB_SPEC i baggrunden, som om de var startet med \n"
+"    \"&\". Hvis JOB_SPEC ikke findes, vil skallen opfattelse af, hvad der "
+"er\n"
+"    det nuværende job, blive brugt.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Afsluttes succesfuldt medmindre jobkontrol ikke er slået til, eller "
+"hvis\n"
+"    der opstår en fejl."
+
+#: builtins.c:793
+#, fuzzy
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"Husk og vis programplaceringer.\n"
+"    \n"
+"    Afgør og husker det fulde stinavn for hver kommando-NAVN. Hvis der ikke\n"
+"    gives noget argument, vil information om huskede kommandoer blive vist.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -d\t\tglem den huskede placering for hvert NAVN\n"
+"      -l\t\tvis i et format som kan genanvendes\n"
+"      -p stinavn\tbrug STINAVN som det fulde stinavn for NAVN\n"
+"      -r\t\tglem alle huskede placeringer\n"
+"      -t\t\tudskriv den huskede placering for hvert NAVN, med NAVNet\n"
+"    \t\tudskrevet foran placeringen hvis flere NAVNe er angivet.\n"
+"    Argumenter:\n"
+"      NAVN\t\tDer søges efter hvert navn i $PATH og de tilføjes til\n"
+"    \t\tlisten af huskede kommandoer.\n"
+"                \n"
+"    Afslutningsstatus:\n"
+"    Afsluttes succesfuldt med mindre NAVN ikke kan findes, eller hvis der "
+"angives\n"
+"    et ugyldig tilvalg."
+
+#: builtins.c:818
+#, fuzzy
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Vis information om indbyggede kommandoer.\n"
+"    \n"
+"    Viser korte sammendrag om indbyggede kommandoer. Hvis MØNSTER er "
+"angivet,\n"
+"    vil der blive givet en detaljeret hjælp, om alle de kommandoer som "
+"matcher\n"
+"    MØNSTER, ellers vil der blive udskrevet en liste over hjælpeemner.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -d\tudskriver kort beskrivelse for hvert emne\n"
+"      -m\tviser brugsinformation i pseudo-mansideformat\n"
+"      -s\tvis kun en kort synopsis for hvert emne som matcher MØNSTER\n"
+"    \n"
+"    Argumenter:\n"
+"      MØNSTER\tMønster som specificerer et hjælpeemne\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer succes med mindre MØNSTER ikke kan findes, eller hvis der\n"
+"    angives et ugyldigt tilvalg."
+
+#: builtins.c:842
+#, fuzzy
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Vis eller manipuler med historiklisten.\n"
+"\n"
+"    Vis historikken med linjenumre. Linjer som vises med \"*\" er blevet\n"
+"    ændret. Argumentet N gør at kun de N sidste linjer bliver vist.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -c\trydder historiklisten ved at slette alle elementer i den.\n"
+"      -d forskydning\tsletter historik-elementet ved position FORSKYDNING.\n"
+"      -a\tvedhæfter historiklinjer fra denne session til historikfilen.\n"
+"      -n\tindlæser alle linjer fra historikfilen, som ikke allerede er\n"
+"    \tindlæst\n"
+"      -r\tindlæser historikfilen og føjer dens indhold til historiklisten\n"
+"      -w\tskriver den nuværende historik til historikfilen og vedhæft dem\n"
+"    \ttil historiklisten\n"
+"    \n"
+"      -p\tudfør en historikudvidelse på hvert enkelt ARG og udskriv\n"
+"    \tresultatet uden at tilføje det til historikken\n"
+"      -s\tvedhæft ARGer til historiklisten som et enkelt element\n"
+"    \n"
+"    Hvis FILENAVN er angivet, vil den blive brugt som historikfil,\n"
+"    ellers vil $HISTFILE blive brugt, hvis den har en værdi og ellers\n"
+"    vil ~/.bash_history blive brugt.\n"
+"     \n"
+"    Hvis variablen $HISTTIMEFORMAT er indstillet og ikke er \"null\", vil "
+"dens\n"
+"    værdi blive brugt som formatstreng til strftime(3) til formatering af\n"
+"    tidspunkt for hvert historikelement. Ellers vil ingen tidsstempler "
+"blive\n"
+"    skrevet.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer succes med mindre der er angivet et ugyldig tilvalg, eller "
+"hvis\n"
+"    der opstår en fejl."
+
+#: builtins.c:879
+#, fuzzy
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"Viser status af jobs.\n"
+"    \n"
+"    Viser de aktive jobs. JOBSPEC begrænser output til dette job. Uden "
+"tilvalg\n"
+"    vil status for alle aktive jobs blive vist.\n"
+"    \n"
+"    Tilvalg:\n"
+"    \n"
+"      -l\tvis også proces-id'er ud over den normale information\n"
+"      -n\tviser kun de processer, som har ændret status siden sidste\n"
+"    \tpåmindelse\n"
+"      -p\tviser udelukkende proces-id'er\n"
+"      -r\tbegrænser uddata til kørende jobs\n"
+"      -s\tbegrænser uddata til stoppede jobs\n"
+"    \n"
+"    Hvis -x er givet, vil KOMMANDO blive kørt efter at alle "
+"jobspecifikationer\n"
+"    som står i ARGer er blevet erstattet med proces-id'et for dette jobs "
+"proces-\n"
+"    gruppeleder.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer succes med mindre et ugyldigt tilvalg er angivet, eller hvis "
+"der\n"
+"    opstår en fejl. Hvis -x bruges returneres afslutningsstatus for KOMMANDO."
+
+#: builtins.c:906
+#, fuzzy
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"Fjern jobs fra den aktuelle skal.\n"
+"    \n"
+"    Fjerner hvert JOBSPEC-argument, fra tabellen over aktive jobs. Hvis der "
+"ikke\n"
+"    angives nogen JOBSPEC bruges skallens opfattelse af det aktuelle job.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -a\tfjern alle jobs hvis JOBSPEC ikke er angivet\n"
+"      -h\tmarker hvert JOBSPEC således at SIGHUP ikke sendes til jobbet\n"
+"    \thvis skallen modtager SIGHUP\n"
+"      -r\tfjern kun kørende jobs\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer succes med mindre et ugyldigt tilvalg eller JOBSPEC angives."
+
+#: builtins.c:925
+#, fuzzy
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Send et signal til et job.\n"
+"    \n"
+"    Send signalet SIGSPEC eller SIGNUM til processen, som er angivet ved "
+"PID\n"
+"    eller JOBSPEC. Hvis hverken SIGSPEC eller SIGNUM er angivet antages "
+"SIGTERM.\n"
+"    \n"
+"      -s sig\tSIG er et signalnavn\n"
+"      -n sig\tSIG er et signalnummer\n"
+"      -l\tudskriver signalnavnene. Hvis der står argumenter efter \"-l\",\n"
+"    \tantages det, at de er signalnumre hvis tilhørende signalnavne skal\n"
+"        udskrives.\n"
+"    \n"
+"    Der er to grunde til at kill er en indbygget skal-kommando: Det "
+"tillader\n"
+"    at der kan bruges job-id'er i stedet for proces-id'er og tillader at "
+"stoppe\n"
+"    processer, selvom du har nået grænsen for, hvor mange processer du\n"
+"    kan oprette.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer succes med mindre et ugyldigt tilvalg er angivet, eller hvis "
+"der\n"
+"    opstår en fejl."
+
+#: builtins.c:949
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"Evaluer aritmetiske udtryk.\n"
+"    \n"
+"    Hvert ARG er et aritmetisk udtryk som skal evalueres. Evalueringen\n"
+"    bliver foretaget i heltal med fast-bredde, uden check for overløb,\n"
+"    dog vil division med 0 blive fanget og markeret som en fejl. Den\n"
+"    følgende liste af operatorer er vist i grupper med samme evaluerings-\n"
+"    prioritet. Grupperne er vist med faldende prioritet.\n"
+"    \n"
+"    \tid++, id--\tpost-forøgelse og -formindskelse af variabel\n"
+"    \t++id, --id\tpræ-forøgelse og -formindskelse af variabel\n"
+"    \t-, +\t\tunær minus og plus\n"
+"    \t!, ~\t\tlogisk og bitvis negation\n"
+"    \t**\t\teksponentiering\n"
+"    \t*, /, %\t\tmultiplikation, division, rest\n"
+"    \t+, -\t\taddition, subtraktion\n"
+"    \t<<, >>\t\tvenstre og højre bitvis skift\n"
+"    \t<=, >=, <, >\tsammenligning\n"
+"    \t==, !=\t\tlighed, ulighed\n"
+"    \t&\t\tbitvis AND (OG)\n"
+"    \t^\t\tbitvis XOR (EKSKLUSIVT ELLER)\n"
+"    \t|\t\tbitvis OR (ELLER)\n"
+"    \t&&\t\tlogisk AND (OG)\n"
+"    \t||\t\tlogisk OR (ELLER)\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tbetingelsesoperator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\ttildeling\n"
+"    \n"
+"    Skalvariable er tilladt som operander. Variablens navn vil blive\n"
+"    erstattet af dens værdi (tilpasset så den er et heltal med fast-bredde)\n"
+"    indeni udtrykket. Variablen skal have sin heltals-attribut slået til\n"
+"    for, at den kan bruges i et udtryk.\n"
+"    \n"
+"    Operatorer vil blive evalueret efter prioritet. Underoperatorer i\n"
+"    parenteser bliver evalueret først og kan tilsidesætte de ovenstående\n"
+"    prioriteter.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Hvis det sidste ARG evalueres til 0, vil \"let\" returnere 1, ellers\n"
+"    returneres 0."
+
+#: builtins.c:994
+#, fuzzy
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"Læs en linje fra standardinput og del den op i felter.\n"
+"    \n"
+"    En linje vil blive læst fra standardinput, eller fra fildeskriptor FD "
+"hvis\n"
+"    tilvalget -u er givet. Linjen vil blive delt ind i felter som med ord-\n"
+"    opdeling Det første ord blive tildelt det første NAVN, det andet ord "
+"til \n"
+"    det andet NAVN osv. og de tilbageblivende ord vil blive tildelt det "
+"sidste\n"
+"    NAVN. Kun de tegn som findes i $IFS vil blive genkendt som "
+"ordadskillere.\n"
+"\n"
+"    Hvis der ikke er angivet nogle NAVNe, vil linjen blive gemt i REPLY-\n"
+"    variablen.\n"
+"\n"
+"    Tilvalg:\n"
+"      -a array\tde indlæste ord blive tildelt fortløbende indeks i\n"
+"    \t\tARRAY startende ved 0\n"
+"      -d adskil\tfortsæt indtil det første tegn i ADSKIL bliver læst, i "
+"stedet\n"
+"    \t\tfor ved nylinjetegn\n"
+"      -e\tbrug Readline til at indhente linje fra en interaktiv skal\n"
+"      -i tekst\tBrug TEKST som den indledende tekst til Readline\n"
+"      -n ntegn\treturnerer efter at have læst NTEGN tegn i stedet for at "
+"vente\n"
+"    \t\tpå et nylinjetegn\n"
+"      -p prompt\tudskriv strengen PROMPT, uden et nylinjetegn, før der "
+"forsøges på\n"
+"    \t\tat læse\n"
+"      -r\ttillad ikke at omvendte skråstreger undviger tegn\n"
+"      -s\tudskriv (echo) ikke input som kommer fra en terminal\n"
+"      -t tidsgrænse\tindstil tidsudløb og returner fejl, hvis der ikke kan\n"
+"    \t\t\tlæses en komplet linje indenfor TIDSGRÆNSE sekunder.\n"
+"    \t\t\tVærdien af variablen TMOUT er standardtidsudløbet.\n"
+"    \t\t\tTIDSGRÆNSE kan være et kommatal. Hvis TIDSGRÆNSE er 0,\n"
+"    \t\t\tvil read kun returnere succes hvis der er input\n"
+"    \t\t\ttilgængelig ved den angivne fildeskriptor. Fejlstatus\n"
+"    \t\t\tvil være større end 128 hvis tidsudløb indtræffer.\n"
+"      -u fd\tlæs fra fildeskriptoren FD i stedet for standardinput\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returkoden vil være nul, med mindre slut-på-fil nås, tidsudløb "
+"indtræffer,\n"
+"    eller hvis en ugyldig fildeskriptor gives som argument til -u."
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"Returner fra en skalfunktion.\n"
+"    \n"
+"    Gør at en funktion eller et kildeskript afslutter med en returværdi, som "
+"er\n"
+"    angivet med N. Hvis N udelades, vil returstatussen være den samme som "
+"værdien\n"
+"    fra sidste kommande, som blev eksekveret inde i funktionen eller "
+"skriptet.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer N, eller fejl hvis skallen ikke er i færd med at eksekvere "
+"en\n"
+"    funktion eller et skript."
+
+#: builtins.c:1054
+#, fuzzy
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"Indstiller eller afinitialiserer (unset) skaltilvalg og positionsparametre.\n"
+"    \n"
+"    Ændr værdien af skalattributter og positionsparametre, eller vis navne "
+"og\n"
+"    værdier af skalvariable.\n"
+"\n"
+"    Tilvalg:\n"
+"      -a  Marker variable som er ændret eller oprettet til eksport.\n"
+"      -b  Underret om jobafslutning øjeblikkeligt.\n"
+"      -e  Afslut øjeblikkeligt hvis en kommando afslutter med en\n"
+"          afslutningsstatus som ikke er nul.\n"
+"      -f  Slå filnavngenerering fra (globbing).\n"
+"      -h  Husk kommandoers positionen mens de slås op.\n"
+"      -k  Overfør alle opgavens argumenter til kommandoens miljø, ikke kun "
+"de\n"
+"          som kommer før kommandonavnet.\n"
+"      -m  Slå jobkontrol til.\n"
+"      -n  Læs kommandoer men eksekver dem ikke.\n"
+"      -o tilvalgsnavn\n"
+"          Indstil variablen så den passer til tilvalgsnavn:\n"
+"              allexport    samme som -a\n"
+"              braceexpand  samme som -B\n"
+"              emacs        brug en linjeredigerings-grænseflade som i emacs\n"
+"              errexit      samme som -e\n"
+"              errtrace     samme som -E\n"
+"              functrace    samme som -T\n"
+"              hashall      samme som -h\n"
+"              histexpand   samme som -H\n"
+"              history      slå kommandohistorik til\n"
+"              ignoreeof    skallen vil ikke afslutte ved læsning af\n"
+"                           slut-på-fil (EOF)\n"
+"              interactive-comments\n"
+"                           vis også kommentarerer ved interaktive "
+"kommandoer\n"
+"              keyword      samme som -k\n"
+"              monitor      samme som -m\n"
+"              noclobber    samme som -C\n"
+"              noexec       samme som -n\n"
+"              noglob       samme som -f\n"
+"              nolog        accepteres på nuværende tidspunkt men har ingen\n"
+"                           virkning\n"
+"              notify       samme som -b\n"
+"              nounset      samme som -u\n"
+"              onecmd       samme som -t\n"
+"              physical     samme som -P\n"
+"              pipefail     returværdien af en datakanal (pipeline) er\n"
+"                           status af den sidste kommando, som afsluttedes "
+"med en\n"
+"                           status som er forskellig fra nul, eller nul hvis\n"
+"                           ingen kommando afsluttedes med en status "
+"forskellig\n"
+"                           fra nul\n"
+"              posix        ændrer den måde bash opfører sig på de steder "
+"hvor\n"
+"                           opførslen afviger fra 1003.2-standarden således "
+"at\n"
+"                           standarden følges\n"
+"              privileged   samme som -p\n"
+"              verbose      samme som -v\n"
+"              vi           brug en linjeredigerings-grænseflade som i \"vi"
+"\"\n"
+"              xtrace       samme som -x\n"
+"      -p  Slået til når den reelle og den faktiske brugers id'er ikke er "
+"ens.\n"
+"          Deaktiverer behandling af $ENV-filen og import af skalfunktioner.\n"
+"          Deaktivering af denne valgmulighed vil sætte de faktiske\n"
+"          uid og gid til de reelle uid og gid.\n"
+"      -t  Afslut efter af have læst og eksekveret en kommando.\n"
+"      -u  Behandl afinitialiserede (unset) variable som en fejl ved "
+"substitution.\n"
+"      -v  Udskriv skal-inputlinjer når de læses.\n"
+"      -x  Udskriv kommandoer og deres argumenter når de eksekveres.\n"
+"      -B  Lad skallen udføre klammeudvidelse\n"
+"      -C  Med dette tilvalg vil det ikke tillades at eksisterende regulære "
+"filer\n"
+"          overskrives pga. videreførsel af output.\n"
+"      -E  Med dette tilvalg vil ERR-fælden (trap) arves af skalfunktioner.\n"
+"      -H  Aktiver !-stilhistoriksubstitution. Dette flag er aktiveret som\n"
+"          standard, når skallen er interaktiv.\n"
+"      -P  Med dette tilvalg følges symbolske lænker ikke ved eksekvering af\n"
+"          kommandoer, som f.eks. cd, der ændrer den aktuelle mappe.\n"
+"      -T  Med dette tilvalg vil DEBUG-fælden (trap) arves af "
+"skalfunktioner.\n"
+"      -   Tildel alle tilbageblevne argumenter til positionsparametrene.\n"
+"          Tilvalgene -x og -v er slået fra.\n"
+"  \n"
+"    Bruges + i stedet for - vil disse flag blive slået fra. Flagene kan "
+"også\n"
+"    bruges ved kald af skallen. Flagene det aktuelt er i brug kan findes i "
+"$-.\n"
+"    De tilbageblevne n ARGer er positionsparametre og vil blive tildelt i "
+"række-\n"
+"    følge til $1, $2, .. $n. Hvis der ikke angives nogen ARGer, vil alle "
+"skal-\n"
+"    variable blive udskrevet.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer succes med mindre der angives et ugyldigt tilvalg."
+
+#: builtins.c:1139
+#, fuzzy
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"Afinitialiserer (unset) værdier og attributter for skalvariable og "
+"funktioner.\n"
+"    \n"
+"    Fjerner den tilsvarende variabel eller funktion for hvert NAVN.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -f\tbehandl ethvert NAVN som en skalfunktion\n"
+"      -v\tbehandl ethvert NAVN som en skalvariable\n"
+"    \n"
+"    Uden tilvalg vil unset først prøve at afinitialisere en variabel og "
+"hvis\n"
+"    det mislykkes, vil den prøve med en funktion.\n"
+"    \n"
+"    Nogle variable kan ikke afinitialiseres; læs under \"readonly\".\n"
+"    \n"
+"    Afslutningstatus:\n"
+"    Returnerer succes med mindre der gives et ugyldigt tilvalg eller hvis "
+"et\n"
+"    givent navn er skrivebeskyttet."
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Indstil eksportattributten for skalvariable.\n"
+"    \n"
+"    Marker hvert NAVN til automatisk eksport til miljøet for de kommandoer "
+"som\n"
+"    eksekveres efterfølgende. Hvis VÆRDI er angivet, vil den blive tildelt\n"
+"    variablen før eksportering.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -f\treferer til skalfunktioner\n"
+"      -n\tfjern eksportegenskaben fra hvert NAVN\n"
+"      -p\tvis en liste over alle eksporterede variable og funktioner\n"
+"    \n"
+"    Argumentet \"--\" slår al efterfølgende behandling fra.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer succes med mindre der angives et ugyldigt tilvalg eller hvis\n"
+"    NAVN er ugyldig."
+
+#: builtins.c:1180
+#, fuzzy
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Marker skalvariable som skrivebeskyttet.\n"
+"    \n"
+"    Marker hvert NAVN som skrivebeskyttet. Værdierne af disse navne kan\n"
+"    herefter ikke ændres ved efterfølgende tildeling. Hvis VÆRDI angives, "
+"vil\n"
+"    denne blive tildelt variablen, før den markeres som skrivebeskyttet.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -a\treferer til indekserede arrays\n"
+"      -A\treferer til associative arrayvariable\n"
+"      -f\treferer til skalfunktioner\n"
+"      -p\tvis en liste af alle skrivebeskyttede variable og funktioner\n"
+"    \n"
+"    Argumentet \"--\" slår al efterfølgende fra.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer succes med mindre der angives et ugyldigt tilvalg eller hvis\n"
+"    NAVN er ugyldigt."
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"Skift positionsparametre.\n"
+"    \n"
+"    Omdøb positionsparametrene $N+1,$N+2 ... til $1,$2 ... Hvis N ikke "
+"angives,\n"
+"    antages værdien 1.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer succes med mindre N er negativ eller større end $#."
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Eksekver kommandoer fra en fil i den aktuelle skal.\n"
+"    \n"
+"    Læs og eksekver kommandoer fra FILNAVN i den aktuelle skal. Elementerne "
+"i\n"
+"    $PATH bruges til at finde den mappe som FILNAVN ligger i. Hvis der "
+"angives\n"
+"    ARGUMENTER, omdannes de til positionsparametre når FILNAVN eksekveres.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer status fra den sidst eksekverede kommando i FILNAVN; fejler "
+"hvis\n"
+"    FILNAVN ikke kan læses."
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Suspender skaleksekvering.\n"
+"    \n"
+"    Suspender eksekvering af denne skal indtil den modtager et SIGCONT-"
+"signal.\n"
+"    Med mindre det gennemtvinges, kan en logindskal ikke suspenderes.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -f\tgennemtving suspendering selvom skallen er en logindskal\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer succes med mindre jobkontrol ikke er slået til, eller hvis "
+"der\n"
+"    opstår en fejl."
+
+#: builtins.c:1261
+#, fuzzy
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"Evaluer betingelsesudtryk.\n"
+"    \n"
+"    Afslutter med status 0 (sand) eller 1 (falsk) afhængigt af evalueringen "
+"af\n"
+"    UDTRYK. Udtrykket kan være unært eller binært. Unære udtryk bruges ofte "
+"til\n"
+"    at undersøge filers status. Der findes også strengoperatorer såvel som\n"
+"    operatorer til numeriske sammenligninger.\n"
+"    \n"
+"    Filoperatorer:\n"
+"    \n"
+"      -a FIL         Sand hvis filen eksisterer.\n"
+"      -b FIL         Sand hvis filen er blokspeciel.\n"
+"      -c FIL         Sand hvis filen er tegnspecial.\n"
+"      -d FIL         Sand hvis filen er en mappe.\n"
+"      -e FIL         Sand hvis filen eksisterer.\n"
+"      -f FIL         Sand hvis filen eksisterer og er en regulær fil.\n"
+"      -g FIL         Sand hvis filen er sæt-gruppe-id.\n"
+"      -h FIL         Sand hvis filen er en symbolsk lænke.\n"
+"      -L FIL         Sand hvis filen er en symbolsk lænke.\n"
+"      -k FIL         Sand hvis filens klæbebit (sticky bit) er indstillet.\n"
+"      -p FIL         Sand hvis filen er en navngiven datakanal (pipe).\n"
+"      -r FIL         Sand hvis du kan læse filen.\n"
+"      -s FIL         Sand hvis filen eksisterer og ikke er tom.\n"
+"      -S FIL         Sand hvis filen er en sokkel.\n"
+"      -t FD          Sand hvis FD blev åbnet på en terminal.\n"
+"      -u FIL         Sand hvis filen er sæt-bruger-id.\n"
+"      -w FIL         Sand hvis du kan skrive til filen.\n"
+"      -x FIL         Sand hvis du kan eksekvere filen.\n"
+"      -O FIL         Sand hvis filen effektivt er ejet af dig.\n"
+"      -G FIL         Sand hvis filen effektivt er ejet af din gruppe.\n"
+"      -N FIL         Sand hvis filen er blevet ændret siden den sidst blev "
+"læst.\n"
+"    \n"
+"      FIL1 -nt FIL2  Sand hvis fil1 er nyere end fil2 (ifølge "
+"modificerings-\n"
+"                     datoen)\n"
+"    \n"
+"      FIL1 -ot FIL2  Sand hvis fil1 er ældre en fil2.\n"
+"    \n"
+"      FIL1 -ef FIL2  Sand hvis fil1 er en hård lænke til fil2.\n"
+"    \n"
+"    Strengoperatorer:\n"
+"    \n"
+"      -z STRENG      Sand hvis strengen er tom.\n"
+"    \n"
+"      -n STRENG\n"
+"         STRENG      Sand hvis strengen ikke er tom.\n"
+"    \n"
+"      STRENG1 = STRENG2\n"
+"                     Sand hvis strengene er ens.\n"
+"      STRENG1 != STRENG2\n"
+"                     Sand hvis strengene ikke er ens.\n"
+"      STRENG1 < STRENG2\n"
+"                     Sand hvis STRENG1 sorteres før STRENG2 leksikografisk.\n"
+"      STRENG1 > STRENG2\n"
+"                     Sand hvis STRENG1 sorteres efter STRENG2 "
+"leksikografisk.\n"
+"    \n"
+"    Andre operatorer:\n"
+"    \n"
+"      -o TILVALG     Sand hvis skaltilvalget TILVALG er slået til.\n"
+"      ! UDTRYK       Sand hvis udtryk er falsk.\n"
+"      UDTR1 -a UDTR2 Sand hvis både udtr1 og udtr2 er sande.\n"
+"      UDTR1 -o UDTR2 Sand hvis enten udtr1 eller udtr2 er sand.\n"
+"    \n"
+"      arg1 OP arg2   Aritmetiske tests. OP er en af følgende: -eq, -ne,\n"
+"                     -lt, -le, -gt, eller -ge.\n"
+"    \n"
+"    Binære aritmetiske operatorer returnerer sand hvis ARG1 er henholdsvis "
+"lig,\n"
+"    ikke-lig, mindre-end, mindre-end-eller-lig, større-end, større-end-eller-"
+"lig\n"
+"    ARG2.\n"
+"\n"
+"    Afslutningsstatus:\n"
+"    Returnerer succes hvis UDTRYK evalueres til sand, og fejler hvis UDTRYK\n"
+"    evalueres til falsk eller hvis der gives et ugyldigt argument."
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Evaluer betingelsesudtryk.\n"
+"    \n"
+"    Dette er et synonym for den indbyggede funktion \"test\", dog skal det "
+"sidste\n"
+"    argument skal være \"]\", for at den passer til den åbnende \"[\"."
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Vis procestid.\n"
+"    \n"
+"    Udskriver den akkumulerede bruger- og systemtid for skallen og alle "
+"dens\n"
+"    underprocesser.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Lykkes altid."
+
+#: builtins.c:1364
+#, fuzzy
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"Indfanger signaler og andre begivenheder.\n"
+"    \n"
+"    Definerer og aktiverer håndteringsenheder, som skal køres når skallen\n"
+"    modtager signaler eller under andre omstændigheder.\n"
+"    \n"
+"    ARG er en kommando som skal læses og eksekveres, når skallen modtager\n"
+"    signalet SIGNAL_SPEC. Hvis ARG ikke er angivet (og hvis der angives en\n"
+"    enkelt SIGNAL_SPEC) eller \"-\", vil hvert angivet signal blive "
+"nulstillet\n"
+"    til dets oprindelige værdi. Hvis ARG er null-strengen, vil hvert\n"
+"    SIGNAL_SPEC bliver ignoreret af skallen og af de kommandoer som den\n"
+"    starter.\n"
+"    \n"
+"    Hvis en SIGNAL_SPEC er EXIT (0), vil ARG blive eksekveret ved "
+"afslutning\n"
+"    af skallen. Hvis SIGNAL_SPEC er DEBUG, vil ARG blive eksekveret før "
+"hver\n"
+"    simpel kommando.\n"
+"    \n"
+"    Hvis der ikke er angivet nogen argumenter, vil trap udskrive en liste "
+"af\n"
+"    kommandoer som er associeret med hvert signal.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -l\tudskriver en liste af signalnavne og deres tilhørende numre\n"
+"      -p\tvis de trap-kommandoer som er associeret med hvert SIGNAL_SPEC\n"
+"    \n"
+"    Hver SIGNAL_SPEC er enten et signalnavn i <signal.h> eller et signal-\n"
+"    nummer. Signalnavne er ikke versalfølsomme og præfikset SIG er "
+"valgfrit.\n"
+"    Et signal kan sendes til skallen med \"kill -signal $$\".\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer succes med mindre SIGSPEC er ugyldig eller hvis der er "
+"angivet\n"
+"    et ugyldigt tilvalg."
+
+#: builtins.c:1400
+#, fuzzy
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"Vis information om kommandoers type.\n"
+"    \n"
+"    Oplys for hvert NAVN, hvordan det ville blive tolket, hvis det blev "
+"brugt\n"
+"    som en kommando.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -a\tvis alle placeringer som indeholder en eksekverbar ved navn NAVN;\n"
+"    \tinkluder aliasser, indbyggede og funktioner, hvis og kun hvis "
+"tilvalget\n"
+"    \t\"-p\" ikke også bruges\n"
+"      -f\tundertryk søgning efter skalfunktioner\n"
+"      -P\tgennemtving en stisøgning for hvert NAVN, selvom det er et\n"
+"    \talias, en indbygget eller en funktion og returner samme navne som den\n"
+"    \tdiskfil der ville blive eksekveret\n"
+"      -p\treturnerer enten navnet på den diskfil, som ville blive\n"
+"    \teksekveret, eller ingenting hvis \"type -t NAVN\" ikke ville have\n"
+"    \treturneret \"file\".\n"
+"      -t\treturner et enkelt ord, enten \"alias\", \"keyword\", \"function"
+"\",\n"
+"    \t\"builtin\", \"file\" eller \"\", hvis NAVN er henholdsvis et alias,\n"
+"        skalreserveret ord, skalfunktion, skalindbygget, diskfil eller ikke "
+"blev\n"
+"        fundet.\n"
+"    \n"
+"    Argumenter:\n"
+"      NAVN\tNavnet på den kommando der skal fortolkes.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer succes hvis alle NAVNe kan findes, og fejler hvis bare et "
+"enkelt\n"
+"    ikke findes."
+
+#: builtins.c:1431
+#, fuzzy
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Modificer grænser for skalressourcer.\n"
+"    \n"
+"    Giver kontrol over de ressourcer som er tilgængelige for skallen og de\n"
+"    processer den starter på systemer som tillader den slags kontrol.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -S\tbrug den \"bløde\" ressourcegrænse\n"
+"      -H\tbrug den \"hårde\" ressourcegrænse\n"
+"      -a\talle aktuelle grænser rapporteres\n"
+"      -b\tstørrelse af sokkelbuffer\n"
+"      -c\tmaksimale størrelse af oprettede kernefiler\n"
+"      -d\tmaksimale størrelse af en proces' datasegment\n"
+"      -e\tmaksimale planlægningsprioritet (`nice')\n"
+"      -f\tmaksimale størrelse af filer skrevet af skallen og dens\n"
+"    \tunderprocesser\n"
+"      -i\tmaksimale antal af ventende signaler\n"
+"      -l\tmaksimale størrelse en proces må låse i hukommelse\n"
+"      -m\tmaksimale indstillede område (resident size)\n"
+"      -n\tmaksimale antal åbne fildeskriptorer\n"
+"      -p\tbufferstørrelse for datakanal (pipe)\n"
+"      -q\tmaksimale antal bytes i POSIX-beskedkøer\n"
+"      -r\tmaksimale realtids-planlægningsprioritet\n"
+"      -s\tmaksimal stakstørrelse\n"
+"      -t\tmaksimale mængde cpu-tid i sekunder\n"
+"      -u\tmaksimale antal brugerprocesser\n"
+"      -v\tstørrelsen af virtuel hukommelse\n"
+"      -x\tmaksimale antal fillåse\n"
+"    \n"
+"    Hvis GRÆNSE angives, er det den nye grænse for den specificerede "
+"ressource\n"
+"    De specielle grænser, \"soft\", hard\" og \"unlimited\" står for "
+"henholdsvis den\n"
+"    aktuelle bløde grænse, hårde grænse og ingen grænse. Ellers vil den\n"
+"    aktuelle grænse for den specificerede ressource blive udskrevet. Hvis "
+"der\n"
+"    ikke angives noget tilvalg, antages \"-f\".\n"
+"    \n"
+"    Værdier angives i forøgelser af 1024 bytes, bortset fra -t som er i "
+"sekunder,\n"
+"    -p som er i forøgelser af 512 bytes og -u som er et uskaleret antal af\n"
+"    processer.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer succes med mindre der angives et ugyldigt tilvalg, eller hvis "
+"der\n"
+"    opstår en fejl."
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"Vis eller indstil filmasketilstand.\n"
+"    \n"
+"    Indstiller brugeres filoprettelsesmaske til TILSTAND. Hvis TILSTAND "
+"udelades,\n"
+"    udskrives den nuværende værdi af masken.\n"
+"    \n"
+"    Hvis TILSTAND begynder med et ciffer, bliver det fortolket som et "
+"oktalt\n"
+"    tal, ellers er det en symbolsk tilstandsstreng, ligesom dem der angives\n"
+"    til chmod(1).\n"
+"    \n"
+"    Tilvalg:\n"
+"      -p\thvis TILSTAND udelades, udskrives der i en form der kan bruges\n"
+"    \tsom input\n"
+"      -S\tgør outputtet symbolsk, eller vil output være et oktalt tal\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer succes med mindre TILSTAND er ugyldig, eller hvis et "
+"ugyldigt\n"
+"    tilvalg angives."
+
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"Vent på færdiggørelse af job og returner afslutningsstatus.\n"
+"    \n"
+"    Venter på processen ID. ID kan enten være et proces-id eller en job-\n"
+"    specifikation, og rapporterer dets afslutningstatus. Hvis ID ikke "
+"angives\n"
+"    ventes på alle aktuelle underprocesser og afslutningsstatussen vil være "
+"0.\n"
+"    Hvis ID er en jobspecifikation ventes på alle processer i dette jobs\n"
+"    datakanal (pipe).\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer status af ID, fejler hvis ID er ugyldigt eller hvis der "
+"angives\n"
+"    et ugyldigt tilvalg."
+
+#: builtins.c:1533
+#, fuzzy
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"Venter på færdiggørelse af proces og returnerer dens afslutningsstatus.\n"
+"    \n"
+"    Venter på den angivne proces og rapporterer dens afslutningsstatus. "
+"Hvis\n"
+"    der ikke angives noget PID ventes på alle aktuelle underprocesser og\n"
+"    afslutningsstatussen er 0. PID skal være et proces-id.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer statussen for ID, fejler hvis ID er ugyldig eller hvis der\n"
+"    angives et ugyldigt tilvalg."
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Eksekver kommandoer hvor hvert element i en liste.\n"
+"    \n"
+"    \"for\"-løkken eksekverer en sekvens af kommandoer for hvert element i "
+"en\n"
+"    angivet liste af elementer. Hvis \"in ORD ...;\" ikke er tilstede, så "
+"antages\n"
+"    \"in \"$@\"\". For hvert element i ORD, vil NAVN blive sat til det "
+"element og\n"
+"    KOMMANDOER vil blive eksekveret.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer statussen for den sidst eksekverede kommando."
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Aritmetisk for-løkke.\n"
+"    \n"
+"    Ækvivalent til\n"
+"    \t(( UDTRYK ))\n"
+"    \twhile (( UDTRYK )); do\n"
+"    \t\tKOMMANDOER\n"
+"    \t\t(( UDTRYK3 ))\n"
+"    \tdone\n"
+"    UDTRYK1, UDTRYK2 og UDTRYK3 er aritmetisk udtryk. Hvis et af udtrykkene\n"
+"    mangler, vil resultatet være som om det evalueredes til 1.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer afslutningsstatussen for den sidst eksekverede kommando."
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Vælg ord fra en liste og eksekver kommandoer.\n"
+"    \n"
+"    ORD vil blive udvidet, således at der genereres en liste af ord. Denne\n"
+"    liste af udvidede ord vil blive skrevet til standardfejl, hvert af dem\n"
+"    med at nummer hæftet foran. Hvis \"in ORD\" ikke er angivet, antages "
+"\"in $@\".\n"
+"    Derefter vil en PS3-prompt blive vist og der vil blive læst en linje "
+"fra\n"
+"    standardinput. Hvis linje består af et tal, som svarer til et af de\n"
+"    viste ord, så vil NAVN blive sat til det ord. Hvis linjen er tom, vil "
+"ORD\n"
+"    og prompten blive vist igen. Hvis EOF bliver læst afsluttes kommandoen.\n"
+"    Hvis der læses en hvilken som helst anden værdi, vil NAVN blive sat til\n"
+"    null. Den læste linje vil bliver gemt i variablen REPLY. KOMMANDOER vil\n"
+"    blive eksekveret efter hvert valg indtil en break-kommando eksekveres.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer statussen fra den sidst eksekverede kommando."
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"Rapporterer tid brugt ved en datakanals (pipe) eksekvering.\n"
+"    \n"
+"    Eksekverer DATAKANAL og udskriv den brugte realtid, bruger-CPU-tid\n"
+"    og system-CPU-tid, når den er færdig.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -p\tudskriver timingssammendrag i det flytbare (portable)\n"
+"                POSIX-format\n"
+"    \n"
+"    Værdien af variablen TIMEFORMAT bruges som outputformatet.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Afslutningsstatus er afslutningsstatus for DATAKANAL."
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Eksekver kommandoer baseret på mønstersammenligning.\n"
+"    \n"
+"    Eksekver selektivt KOMMANDOER når ORD passer til MØNSTER. \"|\" bruges "
+"til at\n"
+"    adskille flere mønstre.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer statussen fra den sidst eksekverede kommando."
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Eksekverer kommandoer baseret på betingelse.\n"
+"    \n"
+"    Listen \"if KOMMANDOER\" bliver eksekveret. Hvis dens afslutningsstatus "
+"er\n"
+"    nul, så vil listen \"then KOMMANDOER\" blive eksekveret. Ellers vil "
+"hver\n"
+"    \"elif KOMMANDOER\"-liste blive eksekveret og hvis de returnerer nul "
+"vil\n"
+"    deres tilhørende \"then KOMMANDER\"-liste blive eksekveret og if-"
+"kommandoen\n"
+"    fuldføres. Ellers vil \"else KOMMANDOER\"-listen blive eksekveret, hvis "
+"en\n"
+"    sådan findes. Afslutningsstatus for hele strukturen er afslutnings-\n"
+"    statussen for den sidste kommando, eller nul hvis ingen betingelse var\n"
+"    sand.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer statussen fra den sidst eksekverede kommando."
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Eksekver kommandoer så længe en test evaluerer til sad.\n"
+"    \n"
+"    Udvid og eksekver KOMMANDOER så længe den sidste kommando i \"while\"\n"
+"    KOMMANDOER har en afslutningsstatus på nul.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer statussen fra den sidst eksekverede kommando."
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Eksekver kommandoer så længe en test ikke evaluerer til falsk.\n"
+"    \n"
+"    Udvid og eksekver KOMMANDOER så længe den sidste kommando i \"untill\"\n"
+"    KOMMANDOER har en afslutningsstatus som ikke er nul.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer statussen fra den sidst eksekverede kommando."
+
+#: builtins.c:1671
+#, fuzzy
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"Opret en coproces ved navn NAVN.\n"
+"    \n"
+"    Eksekver KOMMANDO asynkront, med standardoutput og standardinput\n"
+"    for kommandoen forbundet via en datakanal (pipe), til fildeskriptorerne\n"
+"    tildelt til indeks 0 og 1 i en arrayvariabel NAVN i den eksekverende "
+"skal.\n"
+"    Standardnavnet NAVN er \"COPROC\".\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer afslutningsstatussen for KOMMANDO."
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"Definer skalfunktion.\n"
+"    \n"
+"    Opret en skalfunktion ved navn NAVN. Når den køres som en simpel "
+"kommando,\n"
+"    NAVN kører KOMMANDOer i den kaldende skals kontekst. Når NAVN kaldes, "
+"bliver\n"
+"    argumenter sendt videre som $1..$n, og funktionens navn som $FUNCNAME.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer succes med mindre NAVN er skrivebeskyttet."
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Grupper kommandoer som en enhed.\n"
+"    \n"
+"    Kør et sæt af kommandoer i en gruppe. Dette er en måde at videresende\n"
+"    et sæt af kommandoer på.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer statussen fra den sidst eksekverede kommando."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"Genoptag job i forgrunden.\n"
+"    \n"
+"    Ækvivalent til JOB_SPEC-argumentet til \"fg\"-kommandoen. Genoptag et "
+"stoppet\n"
+"    job eller et job som ligger i baggrunden. JOB_SPEC kan specificere enten "
+"et\n"
+"    jobnavn eller et jobnummer. Hvis JOB_SPEC efterfølges af en \"&\", vil "
+"jobbet\n"
+"    blive placeret i baggrunden, som om jobspecifikationen var givet som et\n"
+"    argument til \"bg\".\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer statussen af det genoptagede job."
+
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Evaluer aritmetisk udtryk.\n"
+"    \n"
+"    UDTRYK evalueres ifølge reglerne for aritmetisk evaluering. Ækvivalent "
+"til\n"
+"    \"let UDTRYK\".\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer 1 hvis udtrykket evalueres til 0, ellers returneres 0."
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"Eksekver betingelseskommando.\n"
+"    \n"
+"    Returnerer status 0 eller 1 afhængigt af evalueringen af betingelses-\n"
+"    udtrykket UDTRYK. Udtryk består af de samme primære elementer som "
+"bliver\n"
+"    brugt i den indbyggede funktion \"test\" og kan kombineres ved brug af "
+"følgende\n"
+"    operatorer:\n"
+"    \n"
+"      ( UDTRYK )\tReturnerer værdien af UDTRYK\n"
+"      ! UDTRYK\t\tSand hvis UDTRYK er falsk, ellers falsk\n"
+"      UDTR1 && UDTR2\tSand hvis både UDTR1 og UDTR2 er sande, ellers falsk\n"
+"      UDTR1 && UDTR2\tSand hvis enten UDTR1 eller UDTR2 er sand, ellers "
+"falsk\n"
+"    \n"
+"    Når operatorerne \"==\" og \"!=\" bruges, vil strengen til højre for "
+"operatoren\n"
+"    blive brugt som et mønster og der vil blive udført strengmatching. Når\n"
+"    operatoren \"=~\" bliver brugt, vil strengen til højre for operatoren "
+"blive\n"
+"    matchet som et regulært udtryk.\n"
+"    \n"
+"    Operatorerne && og || vil ikke evaluere UDTR2, hvis UDTR1 er nok til at\n"
+"    afgøre udtrykkets værdi.\n"
+"\n"
+"    Afslutningsstatus:\n"
+"    0 eller 1 afhængigt af udtrykkets værdi."
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"Navnene på almindelige skalvariable og deres brug.\n"
+"    \n"
+"    BASH_VERSION\tVersionsinformation for denne Bash.\n"
+"    CDPATH\tEn kolonsepareret liste af mapper som kan gennemsøges for at\n"
+"    \t\tfinde mapper som er givet som argument til cd.\n"
+"    GLOBIGNORE\tEn kolonsepareret liste af mønstre som beskriver filnavne "
+"som\n"
+"    \t\tskal ignoreres ved stinavnsudvidelse.\n"
+"    HISTFILE\tNavnet på den fil hvori din kommandohistorik gemmes.\n"
+"    HISTFILESIZE\tDet maksimale antal linjer denne fil kan indeholde.\n"
+"    HISTSIZE\tDet maksimale antal linjer som en kørende skal kan tilgå.\n"
+"    HOME\tDet komplette stinavn til din logindmappe.\n"
+"    HOSTNAME\tNavnet på den aktuelle vært.\n"
+"    HOSTTYPE\tDen type af CPU som denne version af Bash kører under.\n"
+"    IGNOREEOF\tKontrollerer skallens handlinger hvis den modtager et EOF-"
+"tegn\n"
+"    \t\tsom eneste input. Hvis den er indstillet, angiver den det antal\n"
+"    \t\tEOF-tegn som skal følge lige efter hinanden på en tom linje,\n"
+"    \t\tfør skallen afslutter (standardværdien er 10). Hvis den ikke er\n"
+"                indstillet vil EOF betyde slutningen af input.\n"
+"    MACHTYPE\tEn streng som beskriver det aktuelle system som Bash kører "
+"på.\n"
+"    MAILCHECK\tHvor ofte Bash tjekker for ny post, i sekunder.\n"
+"    MAILPATH\tEn kolonsepareret liste af filnavne som Bash tjekker for ny\n"
+"    \t\tpost.\n"
+"    OSTYPE\tDen version af Unix som denne version af Bash kører på.\n"
+"    PATH\tEn kolonsepareret liste af mapper som der søges i efter "
+"kommandoer.\n"
+"    PROMPT_COMMAND\tEn kommando som skal eksekveres før hver primære prompt\n"
+"    \t\tudskrives.\n"
+"    PS1\t\tStreng for den primære prompt.\n"
+"    PS2\t\tStreng for den sekundære prompt.\n"
+"    PWD\t\tDet fulde stinavn for den aktuelle mappe.\n"
+"    SHELLOPTS\tEn kolonsepareret liste af aktiverede skaltilvalg.\n"
+"    TERM\tNavnet på den aktuelle skaltype.\n"
+"    TIMEFORMAT\tOutputformatet for timingstatistik som vises ved hjælp af "
+"det\n"
+"    \t\treserverede ord \"time\".\n"
+"    auto_resume\tIkke-null betyder at for et kommandoord, som optræder for "
+"sig selv\n"
+"    \t\tpå en linje, vil der først blive kigget efter det i listen over\n"
+"    \t\taktuelt stoppede jobs. Hvis det findes der, vil dette job blive\n"
+"                bragt i forgrunden. Værdien \"exact\" betyder at "
+"kommandoordet\n"
+"                skal matche et ord fra listen over stoppede jobs præcist.\n"
+"                Værdien \"substring\" betyder at kommandoordet skal matche "
+"en\n"
+"                delstreng af jobbet. Enhver anden værdi betyder at "
+"kommandoen\n"
+"                skal være et præfiks for et stoppet job.\n"
+"    histchars\tTegn som kontrollerer historikudvidelse og hurtig "
+"substitution\n"
+"    \t\ti historik. Det første tegn er historik-substitutionstegnet, som\n"
+"                regel \"!\". Det andet tegn er hurtigsubstitutionstegnet, "
+"som\n"
+"    \t\tregel \"^\". Det tredje tegn er historik-kommentartegnet, som\n"
+"    \t\tregel \"#\".\n"
+"    HISTIGNORE\tEn kolonsepareret liste af mønstre som bliver brugt til at\n"
+"    \t\tbestemme hvilke kommandoer der skal gemmes i historikken.\n"
+
+#: builtins.c:1821
+#, fuzzy
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Tilføjer mapper til stakken.\n"
+"    \n"
+"    Tilføjer en mappe til toppen af stakken, eller roterer stakken, således\n"
+"    at den nye top af stakken bliver den aktuelle mappe. Uden argumenter\n"
+"    ombyttes de to øverste mapper.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -n\tUndertrykker det mappeskift der normalt følger med tilføjelse\n"
+"    \taf mapper til stakken, således at kun stakken ændres.\n"
+"    \n"
+"    Argumenter:\n"
+"      +N\tRoterer stakken således at den N'te mappe (talt fra venstre i\n"
+"    \tlisten som vises af \"dirs\", startende med nul) vil blive placeret i\n"
+"    \ttoppen.\n"
+"    \n"
+"      -N\tRoterer stakken således at den N'te mappe (talt fra højre i\n"
+"    \tlisten som vises af \"dirs\", startende med nul) vil blive placeret i\n"
+"    \ttoppen.\n"
+"    \n"
+"      mappe\tTilføjer MAPPE til toppen af mappestakken, således at den\n"
+"    \tbliver den aktuelle mappe.\n"
+"      \n"
+"      Den indbyggede \"dirs\" viser mappestakken.\n"
+"      \n"
+"      Afslutningsstatus:\n"
+"      Returnerer succes med mindre der angives et ugyldigt tilvalg, eller "
+"hvis\n"
+"      mappeskiftet mislykkes."
+
+#: builtins.c:1855
+#, fuzzy
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Fjerner mapper fra stakken.\n"
+"    \n"
+"    Fjerner en mappe fra stakken. Uden argumenter fjernes den øverste mappe "
+"fra\n"
+"    stakken og der skiftes til den nye aktuelle mappe.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -n\tUndertrykker det mappeskift der normalt følger med fjernelse\n"
+"    \taf mapper fra stakken, således at kun stakken ændres.\n"
+"    \n"
+"    Argumenter:\n"
+"      +N\tFjerner den N'te mappe, talt fra venstre i listen som vises af\n"
+"    \t\"dirs\", startende med nul. F.eks: vil \"popd +0\" fjerne den første "
+"mappe\n"
+"    \tog \"popd +1\" den anden.\n"
+"    \n"
+"      -N\tFjerner den N'te mappe, talt fra højre i listen som vises af\n"
+"    \t\"dirs\", startende med nul. F.eks: vil \"popd -0\" fjerne den sidste "
+"mappe\n"
+"    \tog \"popd -1\" den andensidste.\n"
+"    \n"
+"      Den indbyggede \"dirs\" viser mappestakken.\n"
+"      \n"
+"      Afslutningsstatus:\n"
+"      Returnerer succes med mindre der angives et ugyldigt tilvalg, eller "
+"hvis\n"
+"      mappeskiftet mislykkes."
+
+#: builtins.c:1885
+#, fuzzy
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Vis mappestakken.\n"
+"    \n"
+"    Vis listen af huskede mapper. Mapper tilføjes denne liste ved hjælp\n"
+"    af \"pushd\"-kommandoen. Du kan komme tilbage gennem listen med \"popd"
+"\"-\n"
+"    kommandoen.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -c\tryd mappestakken ved at slette alle dens elementer\n"
+"      -l\tudskriv ikke mapper relativt til din hjemmemappe med et\n"
+"        foranstillet tildetegn\n"
+"      -p\tudskriv mappestakken med et element per linje\n"
+"      -v\tudskriv mappestakken med et element per linje, med dets\n"
+"    \tposition i stakken foranstillet\n"
+"    \n"
+"    Argumenter:\n"
+"      +N\tViser det N'te element, talt fra venstre i listen som den vises\n"
+"        af \"dirs\" kørt uden argumenter, talt fra nul.\n"
+"      -N\tViser det N'te element, talt fra højre i listen som den vises af\n"
+"    \t\"dirs\" kørt uden argumenter, talt fra nul.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer succes med mindre der angives et ugyldigt tilvalg, eller hvis "
+"der\n"
+"    opstår en fejl."
+
+#: builtins.c:1916
+#, fuzzy
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"Indstil og afindstil (unset) skalvariable.\n"
+"    \n"
+"    Ændr indstillinger for hver skalvariabel INDSTNAVN. Uden argumenter "
+"vises\n"
+"    en liste af skalvariable, sammen med information om hvorvidt de er\n"
+"    indstillet.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -o\tbegræns INDSTNAVN til dem som er defineret til brug med \"set -o"
+"\"\n"
+"      -p\tudskriv alle skalvariable sammen med en indikation af deres\n"
+"    \tstatus\n"
+"      -q\tundertryk output\n"
+"      -s\taktiver (set) hvert INDSTNAVN\n"
+"      -u\tdeaktiver (unset) hvert INDSTNAVN\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer succes hvis INDSTNAVN er aktiveret; fejler hvis der angives "
+"et\n"
+"    ugyldigt tilvalg eller hvis INDSTNAVN er deaktiveret."
+
+#: builtins.c:1937
+#, fuzzy
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"Formaterer og udskriver ARGUMENTER formateret efter FORMAT.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -v var\tsend output til skalvariablen VAR i stedet for at vise det "
+"via\n"
+"    \t\tstandardoutput\n"
+"    \n"
+"    FORMAT er en tegnstreng som indeholder 3 typer af objekter: Almindelige "
+"tegn,\n"
+"    som kopieres til standardoutput som de er; undvigetegn, som konverteres "
+"og\n"
+"    kopieres til standardoutput; og formatspecifikationer, som hver især "
+"fører\n"
+"    til udskrivningen af det næste argument.\n"
+"    \n"
+"    Ud over de standardformatspecifikationer som er beskrevet i printf(1) "
+"og\n"
+"    printf(3), fortolker printf også følgende:\n"
+"    \n"
+"      %b\tudvid undvigesekvenser med omvendt skråstreg i det tilsvarende\n"
+"    \targument\n"
+"      %q\tciter argumenter på en måde så de kan genbruges som skalinput\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer succes med mindre der angives et ugyldigt tilvalg, eller "
+"hvis\n"
+"    der opstår en skrive- eller tildelingsfejl."
+
+#: builtins.c:1971
+#, fuzzy
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Specificer hvordan argumenter fuldføres af Readline.\n"
+"    \n"
+"    Specificer hvordan argumenter skal fuldføres for hvert NAVN. Hvis der\n"
+"    ikke er angivet nogen tilvalg, vil de eksisterende fuldførsels-\n"
+"    specifikationer blive udskrevet på en form der tillader dem at blive\n"
+"    genbrugt som input.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -p\tudskriv eksisterende fuldførselsspecifikationer i et format\n"
+"    \tsom kan genbruges\n"
+"      -r\tfjern en fuldførselsspecifikation for hvert NAVN, eller,\n"
+"    \thvis der ikke er angivet nogle NAVNe, alle fuldførselsspecifikationer\n"
+"    \n"
+"    Når fuldførsel forsøges, vil handlinger blive anvendt i den rækkefølge,\n"
+"    som de tilvalg som har store bogstaver, står i.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer succes med mindre der angives et ugyldigt tilvalg, eller "
+"hvis\n"
+"    der opstår en fejl."
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Vis mulige fuldførsler afhængigt af indstillingerne.\n"
+"    \n"
+"    Beregnet til brug i skalfunktioner som genererer de mulige "
+"fuldførelser.\n"
+"    Hvis det valgfrie ORD angives, vil der blive genereret fuldførsler som\n"
+"    matcher ORD.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer succes med mindre der angives et ugyldigt tilvalg, eller "
+"hvis\n"
+"    der opstår en fejl."
+
+# Fejlrapport
+#: builtins.c:2016
+#, fuzzy
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"Ændr eller vis indstillinger for fuldførsel.\n"
+"    \n"
+"    Ændr fuldførselsindstillinger for hvert NAVN, eller, hvis der ikke er\n"
+"    angivet nogle NAVNe, fuldførslen der bliver eksekveret nu. Hvis der "
+"ikke\n"
+"    er angivet nogle tilvalg, vil fuldførslen for hvert navn eller den\n"
+"    aktuelle fuldførsel blive udskrevet.\n"
+"    \n"
+"    Tilvalg:\n"
+"    \t-o indstilling\tIndstil fuldførselsindstillingen INDSTILLING for\n"
+"    \t\t\thvert NAVN.\n"
+"    Ved brug af \"+o\" i stedet for \"-o\" vil den specificerede indstilling "
+"blive\n"
+"    slået fra.\n"
+"    \n"
+"    Argumenter:\n"
+"    \n"
+"    Hvert NAVN refererer til en kommando, for hvilken der tidligere er "
+"blevet\n"
+"    angivet en fuldførselsspecifikation med den indbyggede \"complete\". "
+"Hvis\n"
+"    der ikke er angivet nogle NAVNe, så skal compopt kaldes af den funktion "
+"som\n"
+"    genererer fuldførsler nu og så vil indstillingerne for den aktuelt\n"
+"    kørende fuldførselsgenerator blive modificeret.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer succes med mindre der angives et ugyldigt tilvalg, eller "
+"hvis\n"
+"    der ikke er defineret en fuldførselsspecifikation for NAVN."
+
+#: builtins.c:2047
+#, fuzzy
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"Læs linjer ind i en arrayvariabel fra standardinput.\n"
+"    \n"
+"    Læs linjer ind i en arrayvariabel ARRAY fra standardinput, eller fra en\n"
+"    fildeskriptor FD, hvis tilvalget -u er givet. Variablen MAPFIL er "
+"forvalgt\n"
+"    som ARRAY.\n"
+"    \n"
+"    Tilvalg:\n"
+"      -n antal\tKopier højst ANTAL linjer. Hvis ANTAL er 0 kopieres alle "
+"linjer.\n"
+"      -O start\tBegynd at skrive til ARRAY ved indeks START. Standardværdien "
+"er\n"
+"    \t0.\n"
+"      -s antal\tSmid de første ANTAL læste linjer væk.\n"
+"      -t \tFjern et efterfølgende nylinjetegn fra slutningen af hver linje.\n"
+"      -u fd\tLæs linjer fra fildeskriptoren FD i stedet for fra standard-\n"
+"    \t\tinput.\n"
+"      -C tilbagekald\tEvaluer TILBAGEKALD hver gang KVANTUM linjer er læst.\n"
+"      -c kvantum\tSpecificer antallet af linjer imellem hvert kald til\n"
+"    \t\t\tTILBAGEKALD\n"
+"    \n"
+"    Argumenter:\n"
+"      ARRAY\t\tNavn for arrayvariabel som skal bruges til fildata.\n"
+"    \n"
+"    Hvis -C er angivet uden -c er standardkvantum 5000. NÃ¥r TILBAGEKALD\n"
+"    kaldes, vil den få det næste arrayindeks, som vil blive brugt som et "
+"ekstra\n"
+"    argument.\n"
+"    \n"
+"    Med mindre et startpunkt i arrayet eksplicit angives, vil mapfile rydde\n"
+"    ARRAY, inden skrivning til den påbegyndes.\n"
+"    \n"
+"    Afslutningsstatus:\n"
+"    Returnerer succes med mindre der angives at ugyldigt tilvalg, eller "
+"hvis\n"
+"    ARRAY er skrivebeskyttet."
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Læs linjer fra en fil ind i en arrayvariabel.\n"
+"    \n"
+"    Et synonym for \"mapfile\"."
+
+#, fuzzy
+#~ msgid "Copyright (C) 2019 Free Software Foundation, Inc."
+#~ msgstr "Ophavsret (C) 2009 Free Software Foundation, Inc."
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "Returnerer konteksten af det nuværende underrutinekald.\n"
+#~ "    \n"
+#~ "    NÃ¥r UDTRYK udelades returneres "
+
+# ??
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process: proces %5ld (%s) i the_pipeline"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "Ukendt signal #"
+
+#, fuzzy
+#~ msgid ""
+#~ "License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl."
+#~ "html>\n"
+#~ msgstr ""
+#~ "Licens GPLv3+: GNU GPL version 3 eller senere <http://gnu.org/licenses/"
+#~ "gpl.html>\n"
+
+#~ msgid ":"
+#~ msgstr ":"
+
+#~ msgid "true"
+#~ msgstr "true"
+
+#~ msgid "false"
+#~ msgstr "false"
+
+#~ msgid "times"
+#~ msgstr "times"
+
+#~ msgid "xrealloc: cannot reallocate %lu bytes (%lu bytes allocated)"
+#~ msgstr "xrealloc: kan ikke allokere %lu bytes (%lu bytes allokeret)"
+
+#~ msgid "xrealloc: cannot allocate %lu bytes"
+#~ msgstr "xrealloc: kan ikke allokere %lu bytes"
+
+#~ msgid "xrealloc: %s:%d: cannot reallocate %lu bytes (%lu bytes allocated)"
+#~ msgstr ""
+#~ "xrealloc: %s:%d: kan ikke reallokere %lu bytes (%lu bytes allokeret)"
diff --git a/po/de.gmo b/po/de.gmo
new file mode 100644
index 0000000..7a31bc5
--- /dev/null
+++ b/po/de.gmo
diff --git a/po/de.po b/po/de.po
new file mode 100644
index 0000000..64d676f
--- /dev/null
+++ b/po/de.po
@@ -0,0 +1,5156 @@
+# qerman language file for GNU Bash 5.0
+# Copyright (C) 2019 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+# Roland Illig <roland.illig@gmx.de> 2019
+# Nils Naumann <nau@gmx.net>, 1996-2019.
+msgid ""
+msgstr ""
+"Project-Id-Version: bash 5.0\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2019-10-21 20:58+0200\n"
+"Last-Translator: Nils Naumann <nau@gmx.net>\n"
+"Language-Team: German <translation-team-de@lists.sourceforge.net>\n"
+"Language: de\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "Falscher Feldindex."
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr "%s: Entferne das Nameref Attribut."
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr ""
+"%s: Das indizierte Array kann in kein assoziatives Array umgewandelt werden."
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: Ungültiger Schlüssel für das assoziative Array."
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: Das Zuweisen auf einen nicht-numerischen Index ist nicht möglich."
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr ""
+"%s: %s: Ein Feldindex wird zum Zuweisen eines assoziativen Arrays benötigt."
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: Kann die Datei %s nicht erzeugen."
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr ""
+"bash_execute_unix_command: Kann nicht die Tastenzuordnung für das Kommando "
+"finden."
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr " %s: Das erste Zeichen ist nicht `\\'."
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "fehlende schließende `%c' in %s."
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: Fehlender Doppelpunkt."
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "»%s«: Bindung kann nicht gelöst werden."
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr "Klammererweiterung: Konnte keinen Speicher für %s zuweisen."
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr "Klammererweiterung: Konnte keinen Speicher für %u Elemente zuweisen."
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr "Klammererweiterung: Konnte keinen Speicher für »%s« zuweisen."
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "»%s«: Ungültiger Aliasname."
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "Zeileneditierung ist nicht aktiviert."
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "»%s«: Ungültiger Tastenzuordnungs-Name."
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: Nicht lesbar: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "%s: Unbekannter Funktionsname."
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s ist keiner Taste zugeordnet.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s kann aufgerufen werden durch "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "»%s«: Bindung kann nicht gelöst werden."
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "Schleifenzähler"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "nur in einer for-, while- oder until-Schleife sinnvoll."
+
+# caller
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Gibt Informationen zum aktuellen Subroutinenaufruf aus.\n"
+"\n"
+"    Ohne Argument wird die Zeilennummer und der Dateiname angezeigt. Mit\n"
+"    Argument werden Zeilennummer, Subroutinenname und Dateiname ausgegeben.\n"
+"    Mit diesen Informationen kann ein Stacktrace erzeugt werden.\n"
+"\n"
+"    Das Argument gibt die angezeigte Position im Funktionsaufrufstapel an,\n"
+"    wobei 0 der aktuelle Funktionsaufruf ist.\n"
+"\n"
+"    Rückgabewert:\n"
+"    Ist ungleich 0 wenn keine Shellfunktion ausgeführt wird oder das "
+"Argument\n"
+"    ungültig ist, sonst 0."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "HOME ist nicht zugewiesen."
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "Zu viele Argumente."
+
+#: builtins/cd.def:342
+msgid "null directory"
+msgstr "NULL Verzeichnis"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "OLDPWD ist nicht zugewiesen."
+
+# Debug Ausgabe
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "Zeile %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "Warnung: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: Aufruf: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: Die Option erfordert ein Argument."
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: Ein numerischer Parameter ist erforderlich."
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: Nicht gefunden."
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: Ungültige Option."
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: Ungültiger Optionsname."
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "»%s«: Ist kein gültiger Bezeichner."
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "Ungültige Oktalzahl."
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "Ungültige hexadezimale Zahl."
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "Ungültige Zahl."
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: Ungültige Signalbezeichnung."
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "»%s«: Ist keine gültige Prozess-ID oder Jobbezeichnung."
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: Schreibgeschützte Variable."
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s ist außerhalb des Gültigkeitsbereiches."
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "Argument"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s ist außerhalb des Gültigkeitsbereiches."
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: Kein solcher Job."
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: Keine Jobsteuerung in dieser Shell."
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "Keine Jobsteuerung in dieser Shell."
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: eingeschränkt"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "eingeschränkt"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: Ist kein eingebautes Shellkommando."
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "Schreibfehler: %s."
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "Fehler beim Setzen der Terminalattribute: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "Fehler beim Ermitteln der Terminalattribute: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: Kann das aktuelle Verzeichnis nicht wiederfinden: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: Mehrdeutige Jobbezeichnung."
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr "In dieser Version ist keine Hilfe verfügbar."
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: »unset« nicht möglich: %s ist schreibgeschützt"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: »unset« nicht möglich."
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: Ungültiger Aktionsname."
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: Keine Komplettierung angegeben."
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "Warnung: Die Option -F könnte unerwartete Ergebnisse liefern."
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "Warnung: Die Option -C könnte unerwartete Ergebnisse liefern."
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "Gegenwärtig wird keine Komplettierungsfunktion ausgeführt."
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "Kann nur innerhalb einer Funktion benutzt werden."
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr ""
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr ""
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s: Zirkularbezug auf indirekte Variable."
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "»%s«: Ungültiger Name für indirekte Variablenreferenz."
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "Mit »-f« können keine Funktionen erzeugt werden."
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: Schreibgeschützte Funktion."
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr ""
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: Kann Feldvariablen nicht auf diese Art löschen."
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr ""
+"%s: Konvertieren von assoziativen in indizierte Arrays ist nicht möglich."
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "Dynamisches Laden ist nicht verfügbar."
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "Kann die dynamische Bibliothek nicht laden %s: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "Kann %s nicht in der dynamischen Bibliothek finden %s: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: Ist nicht dynamisch geladen."
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr ""
+"Die Ladefunktion von %s lieferte einen Fehler (%d), daher nicht geladen."
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: Ist nicht dynamisch geladen."
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: Kann nicht löschen: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: ist ein Verzeichnis."
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: Ist keine normale Datei."
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: Die Datei ist zu groß."
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: Kann die Datei nicht ausführen."
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: Kann nicht ausführen: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "Abgemeldet\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "Keine Loginshell: Mit »exit« abmelden!"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Es gibt noch angehaltene Prozesse.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Es gibt noch laufende Prozesse.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "Kein Kommando gefunden."
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr ""
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: Kann die temporäre Datei nicht öffnen: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "gegenwärtig"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "Job %d wurde ohne Jobsteuerung gestartet."
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: Ungültige Option -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: Diese Option erfordert ein Argument -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "Hashing deaktiviert."
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: Die Hashtabelle ist leer.\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "Treffer\tBefehl\n"
+
+# https://lists.gnu.org/archive/html/bug-bash/2019-09/msg00022.html
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Shellkommando, auf das das Schlüsselwort zutrifft `"
+msgstr[1] "Shell Kommandos auf die die Schlüsselwörter zutreffen `"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"Kein passendes Hilfethema für »%s«. Probieren Sie »help help«, »man -k %s« "
+"oder »info %s«."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: Kann die Datei nicht öffnen: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Diese Shellkommandos sind intern definiert. Geben Sie »help« ein, um diese\n"
+"Liste zu sehen. Geben Sie »help Name« ein, um die Beschreibung der Funktion\n"
+"»Name« zu sehen. Geben Sie »info bash« ein, um die vollständige "
+"Dokumentation\n"
+"zu sehen. Geben Sie »man -k« oder »info« ein, um detaillierte "
+"Beschreibungen\n"
+"der Shellkommandos zu sehen.\n"
+"\n"
+"Ein Stern (*) neben dem Namen kennzeichnet deaktivierte Kommandos.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "Es darf höchstens eine Option aus -anrw angegeben werden."
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "Kommandostapelposition."
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: Ungültiger Zeitstempel."
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: Kommandoersetzung gescheitert."
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: inlib gescheitert."
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "Keine weiteren Optionen mit `-x' erlaubt."
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: Die Argumente müssen Prozess- oder Job-IDs sein."
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Unbekannter Fehler."
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "Ausdruck erwartet."
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: Ist kein indiziertes Array."
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: Ungültige Dateideskriptor-Angabe."
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: Ungültiger Dateideskriptor: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: Ungültige Zeilenanzahlangabe."
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: Ungültiger Arrayanfang."
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr ""
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "Fehlender Name für die Arrayvariable."
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr ""
+"Die Unterstützung für Arrayvariablen ist in dieser Shell nicht vorhanden."
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "»%s«: Fehlendes Formatierungszeichen."
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "»%c«: Ungültige Zeitformatangabe."
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "»%c«: Ungültiges Formatierungszeichen."
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "Warnung: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "Formatleseproblem: %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "Fehlende hexadezimale Ziffer nach \\x."
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "Fehlende Unicode-Ziffer für \\%c."
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "kein anderes Verzeichnis"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s: Ungültiges Argument."
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<kein aktuelles Verzeichnis>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "Der Verzeichnisstapel ist leer."
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "Verzeichnisstapelindex"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Zeigt die Liste der gegenwärtig gespeicherten Verzeichnisse an.  Durch\n"
+"    das Kommando »pushd« werden die Verzeichnisse auf den Stapel gelegt\n"
+"    und können durch das Kommando »popd« wieder vom Stapel entfernt\n"
+"    werden.\n"
+"\n"
+"    Optionen:\n"
+"\t-c\tVerzeichnisstapel durch Löschen aller Einträge bereinigen.\n"
+"\t-l\tDas Heimatverzeichnis wird nicht mit vorangestellter Tilde\n"
+"\tausgegeben\n"
+"\t-p\tDen Verzeichnisstapel zeilenweise ausgeben.\n"
+"\t-v\tDen Verzeichnisstapel zeilenweise mit vorangestellter\n"
+"\tPositionsnummer auseben.\n"
+"\n"
+"    Argumente:\n"
+"\t+N\tZeigt den N'ten Eintrag von links an, der von »dirs« ausgegeben\n"
+"\twird, wenn es ohne Optionen aufgerufen wird, beginnend mit Null.\n"
+"\t-N\tZeigt den N'ten Eintrag von rechts an, der von »dirs« ausgegeben\n"
+"\twird, wenn es ohne Optionen aufgerufen wird, beginnend mit Null."
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Legt einen Verzeichniseintrag auf den Verzeichnisstapel ab oder rotiert\n"
+"den Stapel so, dass das aktuelle Verzeichnis oben liegt. Ohne Argumente\n"
+"werden die beiden oberen Einträge vertauscht.\n"
+"\n"
+"    Optionen: \n"
+"       -n\tVermeidet das Wechseln des Verzeichnisses, so dass\n"
+"\tnur der Verzeichnisstapel geändert wird.\n"
+"\n"
+"    Argumente:\n"
+"      +N\tRotiert den Verzeichnisstapel, dass das N-te Verzeichnis\n"
+"\tvon links, das von »dirs« angezeigt wird, nach oben kommt. Die Zählung\n"
+"\tbeginnt dabei mit Null.\n"
+"\n"
+"      -N\tRotiert den Verzeichnisstapel, dass das N-te Verzeichnis\n"
+"\tvon rechts, das von »dirs« angezeigt wird, nach oben kommt. Die \n"
+"\tZählung beginnt dabei mit Null.\n"
+"\n"
+"      dir\tLegt DIR auf den Verzeichnisstapel und wechselt in dieses\n"
+"      Verzeichnis.\n"
+"    \n"
+"    Das Kommando »dirs« Kommando zeigt den Verzeichnisstapel an."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Entfernt Einträge vom Stapel.  Ohne Argumente wird der oberste Eintrag\n"
+"    gelöscht und anschließend in das das neue oben liegende Verzeichnis\n"
+"    gewechselt.\n"
+"    \n"
+"    Optionen:\n"
+"      -n\tVermeidet das Wechseln des Verzeichnisses, so dass\n"
+"\tnur der Verzeichnisstapel geändert wird.\n"
+"    \n"
+"    Argumente:\n"
+"      +N\tEntfernt den N-ten Eintrag von links, der von `dirs'\n"
+"\tangezeigt wird.  Dabei beginnt die Zählung von Null.  So\n"
+"\tentfernt z.B. »popd +0« den ersten und »popd +1« den zweiten\n"
+"\tEintrag.\n"
+"    \n"
+"      -N\tEntfernt den N-ten Eintrag von rechts, der von `dirs'\n"
+"\tangezeigt wird.  Dabei beginnt die Zählung von Null.  So\n"
+"\tentfernt z.B. »popd -0« den letzten und »popd +1« den vorletzten\n"
+"\tEintrag.\n"
+"    \n"
+"    Das Kommando »dirs« zeigt den Verzeichnisstapel an."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: Ungültige Wartezeitangebe."
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "Lesefehler: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr ""
+"»Return« ist nur aus einer Funktion oder einem mit »source« ausgeführten "
+"Skript möglich."
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr ""
+"Gleichzeitiges »unset« einer Funktion und einer Variable ist nicht möglich."
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: Ist keine Feldvariable."
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: Ist keine Funktion."
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr "%s: Exportieren nicht möglich."
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "Verschiebeanzahl"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "Kann nicht Shelloptionen gleichzeitig aktivieren und deaktivieren."
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: Ungültiger Name für Shelloption."
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "Ein Dateiname wird als Argument benötigt."
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: Datei nicht gefunden."
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "Kann die Shell nicht unterbrechen."
+
+# logout
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "Kann die Loginshell nicht unterbrechen."
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s ist ein Alias von »%s«.\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s Ist ein reserviertes Schlüsselwort der Shell.\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s ist eine Funktion.\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s ist eine spezielle eingebaute Funktion.\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s ist eine von der Shell mitgelieferte Funktion.\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s ist %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s ist gehasht (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: Ungültiges Grenzwertargument."
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "`%c': Falsches Kommando."
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: Kann die nicht Grenze setzen: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "Grenze"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: Kann die Grenze nicht ändern: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "Oktalzahl"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "`%c': Ungültiger Operator für den symbolischen Modus."
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "`%c': Ungültiges Zeichen im symbolischen Modus."
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " Zeile "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "Letztes Kommando: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Abbruch..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr "INFO: "
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "Unbekanntes Kommando"
+
+#: error.c:463
+msgid "bad command type"
+msgstr ""
+
+# Programmierfehler
+#: error.c:464
+msgid "bad connector"
+msgstr ""
+
+#: error.c:465
+msgid "bad jump"
+msgstr "Falscher Sprung"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s ist nicht gesetzt."
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\aZu lange keine Eingabe: Automatisch ausgeloggt.\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "Kann nicht die Standardeingabe von /dev/null umleiten: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "TIMEFORMAT: »%c«: Ungültiges Formatzeichen."
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr ""
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "Pipe-Fehler"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr "eval: Maximale Schachtelungstiefe überschritten (%d)"
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr "%s: Maximale Quellcode-Schachtelungstiefe überschritten (%d)"
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr "%s: maximale Schachtelungstiefe für Funktionen überschritten (%d)"
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: eingeschränkt: `/' ist in Kommandonamen unzulässig."
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: Kommando nicht gefunden."
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: Defekter Interpreter"
+
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: Kann die Binärdatei nicht ausführen: %s"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "»%s« ist eine spezielle eingebaute Funktion."
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "Kann fd %d nicht auf fd %d verdoppeln."
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "Zu viele Rekursionen in Ausdruck."
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "Rekursionsstapel leer."
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "Syntaxfehler im Ausdruck."
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "Versuchte Zuweisung zu etwas, das keine Variable ist."
+
+#: expr.c:530
+msgid "syntax error in variable assignment"
+msgstr "Syntaxfehler in der Variablenzuweisung."
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "Division durch 0."
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "Fehler: Falscher Zuweisungsoperator."
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "»:« für ein bedingten Ausdruck erwartet."
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "Der Exponent ist kleiner als 0."
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr ""
+"Nach einem Präinkrement oder Prädekrement wird ein Bezeichner erwartet."
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "Fehlende »)«"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "Syntaxfehler: Operator erwartet."
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "Syntaxfehler: Ungültiger arithmetischer Operator."
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (Fehlerverursachendes Zeichen ist \"%s\")."
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "Ungültige Basis."
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: Ungültige Zeilenanzahlangabe."
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "Der Wert ist für die aktuelle Basis zu groß."
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: Fehler im Ausdruck.\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: Kann auf die übergeordneten Verzeichnisse nicht zugreifen."
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "Konnte den No-Delay-Modus für fd %d nicht wiederherstellen."
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr "Kann keinen neuen Dateideskriptor für die Eingabe von fd %d zuweisen."
+
+# Debug Ausgabe
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input: Es existiert bereits ein Puffer für den neuen fd %d."
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: pgrp pipe"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "Die geforkte PID %d erscheint im laufenden Prozess %d."
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "Lösche den gestoppten Prozess %d der Prozessgruppe %ld."
+
+# https://lists.gnu.org/archive/html/bug-bash/2019-09/msg00024.html
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr ""
+
+# Programmierfehler
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: Prozessnummer existiert nicht."
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Signal %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Fertig"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Angehalten"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Angehalten(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "Läuft"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Fertig(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Exit %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Unbekannter Status"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(Speicherabzug geschrieben) "
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (Verz.: %s)"
+
+# interner Fehler
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr ""
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: Prozess %ld wurde nicht von dieser Shell gestartet."
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr ""
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: Der Job %d ist gestoppt."
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: Kein solcher Job."
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: Der Job ist beendet."
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: Der Job %d läuft bereits im Hintergrund."
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr ""
+
+# Debug Ausgabe
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: Zeile %d: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (Speicherabzug geschrieben)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(gegenwärtiges Arbeitsverzeichnis ist: %s)\n"
+
+# interner Fehler
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: getpgrp war nicht erfolgreich."
+
+# interner Fehler
+#: jobs.c:4447
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: Keine Jobsteuerung im Hintergrund."
+
+# interner Fehler
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: line discipline"
+
+# interner Fehler
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "Kann die Prozessgruppe des Terminals nicht setzen (%d)."
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "Keine Jobsteuerung in dieser Shell."
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: Zusicherung gescheitert: %s.\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d: Zusicherung verpfuscht\\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "Unbekannt"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "Malloc: Ein internet Speicherbereich (free list) wurde überschrieben."
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: Wurde für bereits freigegebenen Speicherbereich aufgerufen."
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: Wurde für nicht zugeordneten Speicherbereich aufgerufen."
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: Underflow erkannt; mh_nbytes außerhalb des Gültigkeitsbereichs."
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: Underflow erkannt; mh_nbytes außerhalb des Gültigkeitsbereichs."
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: Beginn und Ende Segmentgrößen sind unterschiedlich."
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: Mit nicht zugewiesenen Argument aufgerufen."
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr ""
+"realloc: Underflow erkannt; mh_nbytes außerhalb des Gültigkeitsbereichs."
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr ""
+"realloc: Underflow erkannt; mh_nbytes außerhalb des Gültigkeitsbereichs."
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: Beginn und Ende Segmentgrößen sind unterschiedlich.<"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr ""
+"register_alloc: Speicherzuordnungstabelle ist mit FIND_ALLOC gefüllt?\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr ""
+"register_alloc: %p ist bereits in der Speicherzuordnungstabelle als belegt "
+"gekennzeichnet?\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr ""
+"register_free: %p ist bereits in der Speicherzuordnungstabelle als frei "
+"gekennzeichnet?\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "Ungültige Basis"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: Unbekannter Host."
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: unbekannter Dienst."
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: Fehlerhafte Netzwerkspfadangabe."
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "Der Netzwerkbetrieb ist nicht unterstützt."
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: Kann die Regionseinstellungen nicht ändern (%s)."
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: Kann die Regionseinstellungen nicht ändern (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: Kann die Regionseinstellungen nicht ändern (%s)."
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: Kann die Regionseinstellungen nicht ändern (%s): %s"
+
+# Du oder Sie?
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "Sie haben Post in $_."
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "Sie haben neue Post in $_."
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "Die Post in %s wurde bereits gelesen.\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "Syntaxfehler: Es wird ein arithmetischer Ausdruck benötigt."
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "Syntax Fehler: unerwartetes `;'."
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "Syntaxfehler: »((%s))«."
+
+# interner Fehler
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: Falscher Befehlstyp %d."
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr ""
+"Das in der Zeile %d beginnende Here-Dokument geht bis zum Dateiende "
+"(erwartet wird »%s«)."
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr ""
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr ""
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "Dateiende beim Suchen nach »%c« erreicht."
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "Dateiende beim Suchen nach »]]« erreicht."
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "Syntaxfehler im bedingten Ausdruck: Unerwartetes Symbol »%s«."
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "Syntaxfehler im bedingten Ausdruck."
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "Unerwartetes Zeichen: »%s« anstatt von »)«"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "»)« erwartet."
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr ""
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr ""
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr ""
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr ""
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr ""
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr ""
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr ""
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr ""
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr ""
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "Syntaxfehler beim unerwarteten Symbol »%s«"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "Syntaxfehler bei »%s«"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "Syntaxfehler: Unerwartetes Dateiende."
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "Syntaxfehler"
+
+# Du oder Sie?
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Verwenden Sie »%s«, um die Shell zu verlassen.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "Dateiende beim Suchen nach zugehöriger »)« erreicht."
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "completion: Funktion »%s« nicht gefunden."
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr ""
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr ""
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: Falsches Verbindungszeichen »%d«."
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: Ungültiger Dateideskriptor."
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr ""
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr ""
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: »%c«: Ungültiges Formatsymbol."
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "Dateideskriptor außerhalb des gültigen Bereichs."
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: Mehrdeutige Umlenkung."
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: Kann existierende Datei nicht überschreiben."
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: eingeschränkt: Die Ausgabe darf nicht umgeleitet werden."
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "Kann die temporäre Datei für das Hier-Dokument nicht anlegen: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: Kann fd keiner Variable zuweisen."
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr ""
+"Dateinamen der Form /dev/(tcp|udp)/host/port werden ohne Netzwerk nicht "
+"unterstützt"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "Umleitungsfehler: Verdoppeln des Dateibezeichners nicht möglich."
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "Konnte das Verzeichnis »/tmp« nicht finden, bitte anlegen."
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp muss ein Verzeichnis sein."
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr "Der hübsche Druckmodus wird in interaktiven Schells ignoriert."
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: Ungültige Option"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "Konnte die UID nicht in %d ändern: Die effektive UID ist %d"
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "Konnte die GID nicht in %d ändern: Die effektive GID ist %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr "Kann keinen Debugger starten. Der Debugmodus ist gesperrt."
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr "%s: Ist ein Verzeichnis."
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "Ich habe keinen Benutzernamen!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, Version %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Aufruf:\t%s [Lange GNU-Option] [Option] ...\n"
+"\t%s [Lange GNU-Option] [Option] Script-Datei ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "Lange GNU-Optionen:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Shell-Optionen:\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-ilrsD oder -c Kommando oder -O shopt_option\t\t(Nur Aufruf)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s oder Option -o\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+"Geben Sie »%s -c \"help set\"« ein, um mehr über Shell-Optionen zu "
+"erfahren.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr ""
+"Geben Sie »%s -c help« ein, um mehr über eingebaute Shellkommandos zu "
+"erfahren.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "Mit dem Kommando »bashbug« Kommando können Sie Fehler melden.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr "Bash-Homepage: <https://www.gnu.org/software/bash>\n"
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr "Allgemeine Hilfe für GNU-Software: <https://www.gnu.org/gethelp/>\n"
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: Ungültige Operation"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Falsches Signal."
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Aufgelegt"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Unterbrochen (Interrupt)"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Quit"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Ungültige Anweisung."
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "Verfolgen/anhalten abfangen (Trace/breakpoint trap)"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "Abbruchkommando"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "EMT abfangen (EMT trap)"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Gleitkommafehler"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Abgebrochen (Killed)"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Bus-Fehler"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Adressierungsfehler"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Falscher Systemaufruf"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Unterbrochene Pipe"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Wecker"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Abgebrochen (Terminated)"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Dringende IO-Bedingung"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Angehalten (Signal)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Prozessbearbeitung wieder aufgenommen."
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Kindprozess abgebrochen oder gestoppt."
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Angehalten (Terminaleingabe)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Angehalten (Terminalausgabe)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "E/A fertig"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "Rechenzeitgrenze"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "Grenze für Dateigröße"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Alarm (Virtuell)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Alarm (Profil)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Fenster geändert"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Datei blockiert"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Nutzersignal 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Nutzersignal 2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "HFT Eingabedaten ausstehend"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "Spannungsausfall steht bevor"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "Systemausfall steht bevor"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "Verlege den Prozess auf einen anderen Prozessor"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "Programmierfehler"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "HFT-Monitormodus erlaubt"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "HFT-Monitormodus abgeschaltet"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "HFT-Tonfolge beendet"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "Informationsanforderung"
+
+# https://lists.gnu.org/archive/html/bug-bash/2019-09/msg00025.html
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "Unbekanntes Signal Nr.: %d."
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "Falsche Ersetzung: Kein schließendes »%s« in »%s« enthalten."
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: Kann einem Feldelement keine Liste zuweisen."
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "Kann keine Pipe für die Prozessersetzung erzeugen."
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "Kann den Kindsprozess für die Prozessersetzung nicht erzeugen."
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "Kann nicht die benannte Pipe %s zum Lesen öffnen."
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "Kann nicht die benannte Pipe %s zum Schreiben öffnen."
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "Kann die benannte Pipe %s nicht auf fd %d duplizieren."
+
+#: subst.c:6213
+msgid "command substitution: ignored null byte in input"
+msgstr "Kommandoersetzung: NULL-Byte in der Eingabe ignoriert."
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "Kann keine Pipes für Kommandoersetzung erzeugen."
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "Kann keinen Unterprozess für die Kommandoersetzung erzeugen."
+
+# interner Fehler
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute: Kann Pipe nicht als Dateideskriptor 1 duplizieren."
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: Ungültiger Variablenname für Namensreferenz."
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: Ungültige indirekte Expansion."
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr "%s: Ungültiger Variablenname."
+
+#: subst.c:7256
+#, c-format
+msgid "%s: parameter not set"
+msgstr "%s: Der Parameter ist nicht gesetzt."
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: Parameter ist leer oder nicht gesetzt."
+
+# interner Fehler
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: Teilstring-Ausdruck < 0."
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: Falsche Substitution."
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: Kann so nicht zuweisen."
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+"Zukünftige Versionen dieser Shell werden das Auswerten arithmetischer "
+"Ersetzungen erzwingen."
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "Falsche Ersetzung: Kein schließendes »`« in %s."
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "Keine Entsprechung: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "Argument erwartet."
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: Ganzzahliger Ausdruck erwartet."
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "»)« erwartet."
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "»)« erwartet, %s gefunden."
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: Zweistelliger (binärer) Operator erwartet."
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: Einstelliger (unärer) Operator erwartet."
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "Fehlende »]«"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "Syntax Fehler: unerwartetes `;'."
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "Ungültige Signalnummer."
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr "Traphandler: Maximale Traphandler-Ebene überschritten (%d)"
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: Ungültiger Wert in trap_list[%d]: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+
+# Programmierfehler
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: Falsches Signal %d."
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "Fehler beim Importieren der Funktionsdefinition für »%s«."
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "Der Shell-Level (%d) ist zu hoch und wird auf 1 zurückgesetzt."
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: no function context at current scope"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: Der Variable darf kein Wert zugewiesen werden."
+
+# Interner Fehler
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr "%s: assigning integer to name reference"
+
+# Interner Fehler
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: no function context at current scope"
+
+# Interner Fehler
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s has null exportstr"
+
+# Interner Fehler
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "invalid character %d in exportstr for %s"
+
+# Interner Fehler
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "no `=' in exportstr for %s"
+
+# Interner Fehler
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr "pop_var_context: head of shell_variables not a function context"
+
+# Interner Fehler
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: no global_variables context"
+
+# Interner Fehler
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr "pop_scope: head of shell_variables not a temporary environment scope"
+
+# Interner Fehler
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: cannot open as FILE"
+
+# Interner Fehler
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: invalid value for trace file descriptor"
+
+# Interner Fehler
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s: compatibility value out of range"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Copyright (C) 2018 Free Software Foundation, Inc."
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"Lizenz GPLv3+: GNU GPL Version 3 oder jünger <http://gnu.org/licenses/gpl."
+"html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, Version %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr "Dies ist freie Software. Sie darf verändert und verteilt werden."
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "Es wird keine Garantie gewährt, soweit das Gesetz es zulässt."
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: Konnte keine %lu Bytes reservieren (%lu bytes reserviert)."
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: Konnte keine %lu Bytes reservieren."
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: Konnte keine %lu Bytes reservieren (%lu bytes reserviert)."
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: Konnte keine %lu Bytes reservieren."
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [Name[=Wert] ... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] Name [Name ...]"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpsvPSVX] [-m Tastaturtabelle] [-f Dateiname] [-q Name] [-u Name]\n"
+"\t[-r Tastenfolge] [-x Tastenfolge:Shell Kommando]\n"
+"\t[Tastenfolge:readline-Funktion oder -Kommando]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [Shellkommando [Argument ...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [Ausdruck]"
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]] [-@]] [Verzeichnis]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] Kommando [Argument ...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilrntux] [-p] [Name[=Wert] ...]"
+
+#
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilnrtux] [-p] Name[=Wert] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [Option] Name[=Wert] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [Argument ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [Argument ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f Dateiname] [Name ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [Argument ...]"
+
+# https://lists.gnu.org/archive/html/bug-bash/2019-09/msg00026.html
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts Optionen Variable [Argumente]"
+
+# https://lists.gnu.org/archive/html/bug-bash/2019-09/msg00026.html
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a Name] [Kommando [Argumente ...]] [Umleitung ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr ""
+"fc [-e Editor] [-lnr] [Anfang] [Ende] oder fc -s [Muster=Ersetzung] "
+"[Kommando]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [Jobbezeichnung]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [Jobbezeichnung ...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p Pfadname] [-dt] [Name ...]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [Muster ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d Offset] [n] oder history -anrw [Dateiname] oder history -ps "
+"Argument [Argument...]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [Jobbez. ...] or jobs -x Kommando [Arg]"
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [Jobbezeichnung ... | pid ...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s Signalname | -n Signalnummer | -Signalname] pid | jobspec ... oder "
+"kill -l [Signalname]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let Argument [Argument ...]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a Feld] [-d Begrenzer] [-i Text] [-n Zeichenanzahl] [-N "
+"Zeichenanzahl] [-p Prompt] [-t Zeitlimit] [-u fd] [Name ...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o Option] [--] [Argument ...]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [NAME ...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [Name[=Wert] ...] oder export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [Name[=Wert] ...] oder readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source Dateiname [Argumente]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". Dateiname [Argumente]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [Ausdruck]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ Argument... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[Argument] Signalbezeichnung ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] Name [Name ...]"
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [Grenze]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [Modus]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-fn] [id ...]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [pid ...]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for Name [in Wort ... ] ; do Kommandos; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( Ausdr1; Ausdr2; Ausdr3 )); do Kommandos; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select Name [in Wort ... ;] do Kommandos; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] Pipeline"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case Wort in [Muster [| Muster]...) Kommandos ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if Kommandos; then Kommandos; [ elif Kommandos; then Kommandos; ]... [ else "
+"Kommandos; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while Kommandos; do Kommandos; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until Kommandos; do Kommandos; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [Name] Kommando [Umleitungen]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function Name { Kommandos ; } oder Name () { Kommandos ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ Kommandos ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "Jobbezeichnung [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( Ausdruck ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ Ausdruck ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "variables - Namen und Bedeutung einiger Shellvariablen"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | Verzeichnis]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [Optionsname ...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v var] Format [Argumente]"
+
+# https://lists.gnu.org/archive/html/bug-bash/2019-09/msg00027.html
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DE] [-o Option] [-A Aktion]\n"
+"         [-G Suchmuster] [-W Wortliste]  [-F Funktion] [-C Kommando]\n"
+"         [-X Filtermuster] [-P Prefix] [-S Suffix] [Name ...]"
+
+# https://lists.gnu.org/archive/html/bug-bash/2019-09/msg00027.html
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o Option] [-A Aktion] [-G Suchmuster] [-W "
+"Wortliste]\n"
+"        [-F Funktion] [-C Kommando] [-X Filtermuster] [-P Prefix] [-S "
+"Suffix]\n"
+"        [Wort]"
+
+#: builtins.c:239
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o Option] [-DEI] [Name ...]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-d Begrenzer] [-n Anzahl] [-O Quelle] [-s Anzahl] [-t] [-u fd]\n"
+"        [-C Callback] [-c Menge] [Feldvariable]"
+
+#: builtins.c:244
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-d Begrenzer] [-n Anzahl] [-O Quelle] [-s Anzahl] [-t]\n"
+"          [-u fd] [-C Callback] [-c Menge] [Feldvariable]"
+
+# alias
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Definiert Aliase oder zeigt sie an.\n"
+"\n"
+"    Ohne Argumente wird die Liste der Aliase (Synonyme) in der Form\n"
+"    »alias Name=Wert« auf die Standardausgabe ausgegeben.\n"
+"\n"
+"    Sonst wird ein Alias für jeden angegebenen Namen definiert, wenn\n"
+"    für diesen auch ein »Wert« angegeben wurde. Wenn »Wert« mit einem\n"
+"    Leerzeichen endet, dann wird auch das nächste Wort auf Aliase\n"
+"    überprüft.\n"
+"\n"
+"    Optionen:\n"
+"      -p\tGibt alle definierten Aliase aus.\n"
+"\n"
+"    Rückgabewert:\n"
+"    Meldet Erfolg, außer wenn ein »Name« angegeben worden ist, für den\n"
+"    kein Alias definiert wurde."
+
+# unalias
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Entfernt jeden angegebenen Namen von der Aliasliste.\n"
+"\n"
+"    Optionen:\n"
+"      -a\tEnfernt alle Alias-Definitionen.\n"
+"\n"
+"    Gibt immer Erfolg zurück, außer wenn der Alias nicht existiert."
+
+# bind
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"Bestimmt Readline Tastenzuordnungen und Variablen.\n"
+"    \n"
+"    Weist eine Tastensequenz einer Readlinefunktion oder -makro zu\n"
+"    oder setzt eine Readlinevariable.  Die Argumentsyntax ist zu\n"
+"    den Einträgen in ~/.inputrc äquivalent, aber sie müssen als\n"
+"    einzelnes Argument übergeben werden.  Z.B: bind '\"\\C-x\\C-r\":\n"
+"    re-read-init-file'.\n"
+"    \n"
+"    Optionen:\n"
+"      -m  Keymap         Benutzt KEYMAP as Tastaturbelegung für die "
+"Laufzeit\n"
+"                         dieses Kommandos.  Gültige Keymapnamen sind: "
+"emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command und vi-insert.\n"
+"      -l                 Listet Funktionsnamen auf.\n"
+"      -P                 Listet Funktionsnamen und Tastenzuordnungen auf.\n"
+"      -p                 Listet Funktionsnamen und Tastenzuordnungen so "
+"auf,\n"
+"                         dass sie direkt als Eingabe verwendet werden "
+"können.\n"
+"      -S                 Listet Tastenfolgen und deren Werte auf, die "
+"Makros \n"
+"                         aufrufen.\n"
+"      -s                 Listet Tastenfolgen und deren Werte auf, die "
+"Makros \n"
+"                         aufrufen, dass sie als Eingabe wiederverwendet "
+"werden\n"
+"                         können.\n"
+"      -V                 Listet Variablennamen und Werte auf.\n"
+"      -v                 Listet Variablennamen und Werte so auf, dass sie "
+"als\n"
+"                         Eingabe verwendet werden können.\n"
+"      -q  Funktionsname  Sucht die Tastenfolgen, welche die angegebene\n"
+"                         Funktion aufrufen.\n"
+"      -u  Funktionsname  Entfernt alle der Funktion zugeordneten "
+"Tastenfolgen.\n"
+"      -r  Tastenfolge    Entfernt die Zuweisungen der angegebeben "
+"Tastenfolge.\n"
+"      -f  Dateiname      Liest die Tastenzuordnungen aus der angegebenen "
+"Datei.\n"
+"      -x  Tastenfolge:Shellkommando\tWeist der Tastenfolge das "
+"Shellkommando\n"
+"    \t\t\t\t\tzu.\n"
+"      -X                                Listet mit -x erzeugte\n"
+"                                        Tastenfolgen und deren Werte\n"
+"                                        auf, die Makros aufrufen, dass\n"
+"                                        sie als Eingabe wiederverwendet "
+"werden\n"
+"                                        können.\n"
+"    \n"
+"    Rückgabewert: \n"
+"    Bind gibt 0 zurück, wenn keine unerkannte Option angegeben wurde\n"
+"    oder ein Fehler eintrat."
+
+# break
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Verlässt for-, while- oder until-Schleifen.\n"
+"\n"
+"    Break beendet eine »for«-, »while«- oder »until«- Schleife. Wenn »n«\n"
+"    angegeben ist, werden entsprechend viele geschachtelte Schleifen "
+"beendet.\n"
+"\n"
+"    Rückgabewert:\n"
+"    Der Rückgabewert ist 0, außer »n« ist nicht größer oder gleich 1."
+
+# continue
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Springt zum Schleifenanfang von for, while, oder until Schleifen.\n"
+"\n"
+"    Springt zum Schleifenanfang der aktuellen »for«, »while« oder »until«\n"
+"    Schleife. Wenn »n« angegeben ist, wird zum Beginn der »n«-ten\n"
+"    übergeordneten Schleife gesprungen.\n"
+"\n"
+"    Rückgabewert:\n"
+"    Der Rückgabewert ist 0, außer wenn »n« nicht größer oder gleich 1 ist."
+
+# builtin
+#: builtins.c:354
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Führt ein in der Shell definiertes Kommando aus.\n"
+"\n"
+"    Führt ein in der Shell definiertes Kommando ohne vorherige\n"
+"    Befehlssuche aus. Dies ist dann nützlich, wenn das Kommando als\n"
+"    Shell-Funktion reimplementiert werden soll, aber das Kommando\n"
+"    innerhalb der neuen Funktion aufgerufen wird.\n"
+"\n"
+"    Rückgabewert: \n"
+"    Der Rückgabewert des aufgerufenen Kommandos oder »falsch«, wenn\n"
+"    dieses nicht existiert."
+
+# caller
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Gibt Informationen zum aktuellen Subroutinenaufruf aus.\n"
+"\n"
+"    Ohne Argument wird die Zeilennummer und der Dateiname angezeigt. Mit\n"
+"    Argument werden Zeilennummer, Subroutinenname und Dateiname ausgegeben.\n"
+"    Mit diesen Informationen kann ein Stacktrace erzeugt werden.\n"
+"\n"
+"    Das Argument gibt die angezeigte Position im Funktionsaufrufstapel an,\n"
+"    wobei 0 der aktuelle Funktionsaufruf ist.\n"
+"\n"
+"    Rückgabewert:\n"
+"    Ist ungleich 0 wenn keine Shellfunktion ausgeführt wird oder das "
+"Argument\n"
+"    ungültig ist, sonst 0."
+
+# cd
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"Wechselt das Arbeitsverzeichnis.\n"
+"\n"
+"    Wechselt in das angegebene Arbeitsverzeichnis. Ohne Angabe eines\n"
+"    Verzeichnisses wird in das in der Variable HOME definierte\n"
+"    Verzeichnis gewechselt.\n"
+"\n"
+"    Die Variable CDPATH definiert den Suchpfad, in dem nach dem\n"
+"    angegebenen Verzeichnisnamen gesucht wird. Mehrere Pfade werden\n"
+"    durch Doppelpunkte »:« getrennt. Ein leerer Pfadname entspricht\n"
+"    dem aktuellen Verzeichnis. Mit einem vollständigen Pfadnamen wird\n"
+"    CDPATH nicht benutzt.\n"
+"\n"
+"    Wird kein entsprechendes Verzeichnis gefunden und die Shelloption\n"
+"    »cdable_vars« ist gesetzt, dann wird der `Wert' als Variable\n"
+"    interpretiert. Dessen Inhalt wird dann als Verzeichnisname\n"
+"    verwendet.\n"
+"\n"
+"    Optionen:\n"
+"      -L        Erzwingt, dass symbolischen Links gefolgt wird.\n"
+"                Symbolische Links im aktuellen Verzeichnis werden nach\n"
+"                dem übergeordneten Verzeichnis aufgelöst.\n"
+"      -P        Symbolische Links werden ignoriert. Symbolische\n"
+"                Links im aktuellen Verzeichnis werden vor dem\n"
+"                übergeordneten Verzeichnis aufgelöst.\n"
+"      -e        Wenn mit der Option »-P« das aktuelle Arbeitsverzeichnis\n"
+"                nicht ermittelt werden kann, wird mit einem Rückgabewert\n"
+"                ungleich 0 abgebrochen.\n"
+"      -@        Wenn es das System unterstützt, wird eine Datei mit\n"
+"                erweiterten Attributen als ein Verzeichnis angezeigt,\n"
+"                welches die erweiterten Attribute enthält.\n"
+"\n"
+"    Standardmäßig wird symbolischen Links gefolgt (Option -L).\n"
+"    Das übergeordnete Verzeichnis wird ermittelt, indem der\n"
+"    Dateiname am letzten Schrägstrich gekürzt wird, oder es wird der\n"
+"    Anfang von DIR verwendet.\n"
+"\n"
+"    Rückgabewert:\n"
+"    Der Rückgabewert ist 0, wenn das Verzeichnis erfolgreich\n"
+"    gewechselt wurde, oder wenn die Option -P angegeben und $PWD\n"
+"    erfolgreich gesetzt werden konnte. Sonst ist er ungleich 0."
+
+# pwd
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"Gibt den Namen des aktuellen Arbeitsverzeichnisses aus.\n"
+"\n"
+"    Optionen:\n"
+"      -L        Gibt den Inhalt der Variable $PWD aus, wenn sie das "
+"aktuelle\n"
+"                Arbeitsverzeichnis enthält.\n"
+"      -P        Gibt den physischen Verzeichnispfad aus, ohne symbolische\n"
+"                Links.\n"
+"\n"
+"    Standardmäßig wird immer die Option »-L« gesetzt.\n"
+"\n"
+"    Rückgabewert:\n"
+"    Ist 0, außer wenn eine ungültige Option angegeben oder das aktuelle\n"
+"    Verzeichnis nicht lesbar ist."
+
+# colon
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Leeranweisung.\n"
+"\n"
+"    Leeranweisung; das Kommando hat keine Wirkung.\n"
+"\n"
+"    Rückgabewert:\n"
+"    Das Kommando ist immer »wahr«."
+
+# true
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Gibt »wahr« zurück.\n"
+"    \n"
+"    Rückgabewert:\n"
+"    Immer »wahr«."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Gibt »falsch« zurück.\n"
+"    \n"
+"    Rückgabewert:\n"
+"    Immer »falsch«."
+
+# command
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Führt ein einfaches Kommando aus oder zeigt Informationen über Kommandos "
+"an.\n"
+"\n"
+"    Führt das Kommando mit den angegebenen Argumenten aus, ohne\n"
+"    Shell-Funktion nachzuschlagen oder zeigt Informationen über die\n"
+"    Kommandos an. Dadurch können auch dann Kommandos ausgeführt\n"
+"    werden, wenn eine Shell-Funktion gleichen Namens existiert.\n"
+"\n"
+"    Optionen:\n"
+"      -p        Es wird ein Standardwert für PATH verwendet, der "
+"garantiert,\n"
+"                dass alle Standard-Dienstprogramme gefunden werden.\n"
+"      -v        Beschreibung des Kommandos ausgeben.\n"
+"                Ähnlich dem eingebauten Kommando »type«.\n"
+"      -V        Eine ausführlichere Beschreibung jedes Kommandos ausgeben.\n"
+"\n"
+"    Rückgabewert:\n"
+"    Gibt den Rückgabewert des Kommandos zurück, oder eine Fehlermeldung, "
+"wenn\n"
+"    das Kommando nicht gefunden wird."
+
+# declare
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"Setzt Variablenwerte und deren Attribute.\n"
+"\n"
+"    Deklariert Variablen und weist ihnen Attribute zu. Wenn keine Namen\n"
+"    angegeben sind, werden die Attribute und Werte aller Variablen "
+"ausgegeben.\n"
+"    \n"
+"    Optionen:\n"
+"      -f        Schränkt Aktionen oder Anzeigen auf Funktionsnamen\n"
+"                und Definitionen ein.\n"
+"      -F        Zeigt nur Funktionsnamen an (inklusive Zeilennummer\n"
+"                und Quelldatei beim Debuggen).\n"
+"      -g        Deklariert globale Varieblen innerhalb einer\n"
+"                Shellfunktion; wird ansonsten ignoriert.\n"
+"      -p        Zeigt die Attribute und Werte jeder angegebenen\n"
+"                Variable an.\n"
+"\n"
+"    Attribute setzen:\n"
+"      -a\tDeklariert ein indiziertes Feld (wenn unterstützt).\n"
+"      -A\tDeklariert ein assoziatives Feld (wenn unterstützt).\n"
+"      -i\tDeklariert eine ganzzahlige Variable.\n"
+"      -l\tKonvertiert die Variabennmamen in Kleinbuchstaben.\n"
+"      -n\tDer Name wird als Variable interpretiert. \n"
+"      -r\tDeklariert nur lesbare Variablen.\n"
+"      -t\tWeist das Attribut »trace« zu.\n"
+"      -u\tKonvertiert die Variablennamen in Großbuchstaben.\n"
+"      -x\tExportiert die Variablen über die aktuelle Shell-\n"
+"                Umgebung hinaus.\n"
+"\n"
+"    Das Voranstellen von »+« anstelle von »-« schaltet die angegebenen\n"
+"    Attribute ab.\n"
+"\n"
+"    Für ganzzahlige Variablen werden bei der Zuweisung arithmetische\n"
+"    Berechnungen durchgeführt (siehe »help let«).\n"
+"\n"
+"    Innerhalb einer Funktion werden lokale Variablen erzeugt. Die\n"
+"    Option »-g« unterdrückt dieses Verhalten.\n"
+"\n"
+"    Rückgabewert:\n"
+"    Gibt »Erfolg« zurück, außer eine ungültige Option wurde angegeben,\n"
+"    oder ein Fehler trat auf."
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"Setzt Variablen Werte und Eigenschaften\n"
+"\n"
+"    Synonym für »declare«. Siehe »help declare«."
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Definiert lokale Variablen.\n"
+"\n"
+"    Erzeugt eine lokale Variable Name und weist ihr den Wert Wert zu.\n"
+"    Option kann eine beliebige von »declare« akzeptierte Option sein.\n"
+"\n"
+"    Lokale Variablen können nur innerhalb einer Funktion benutzt\n"
+"    werden. Sie sind nur in der sie erzeugenden Funktion und ihren\n"
+"    Kindern sichtbar.\n"
+"\n"
+"    Rückgabewert: \n"
+"    Liefert 0 außer bei Angabe einer ungültigen Option, einer\n"
+"    fehlerhaften Variablenzuweisung oder dem Aufruf außerhalb einer\n"
+"    Funktion."
+
+# echo
+#: builtins.c:557
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Ausgabe der Argumente auf die Standardausgabe.\n"
+"\n"
+"    Zeigt die Argumente auf der Standardausgabe gefolgt von einem\n"
+"    Zeilenumbruch an.\n"
+"\n"
+"    Optionen:\n"
+"      -n\tKeinen Zeilenumbruch anfügen\n"
+"      -e\tInterpretation der folgenden Escape-Sequenzen zulassen\n"
+"      -E\tKeine Interpretation der Escape-Sequenzen.\n"
+"\n"
+"    »echo« interpretiert die folgenden Escape-Sequenzen:\n"
+"      \a\tAlarm (Glocke)\n"
+"      \\b\tRücktaste (Backspace)\n"
+"      \\c\tweitere Ausgabe unterdrücken\n"
+"      \\e\tEscape-Zeichen\n"
+"      \\E\tEscape-Zeichen\n"
+"      \\f\tSeitenvorschub\n"
+"      \\n\tZeilenvorschub\n"
+"      \\r\tWagenrücklauf\n"
+"      \\t\tHorizontaler Tabulator\n"
+"      \\v\tVertikaler Tabulator\n"
+"      \\\\tumgekehrter Schrägstrich (Backslash)\n"
+"      \\0nnn\tZeichen mit dem ASCII-Code »NNN« (oktal). »NNN« kann null\n"
+"    \t\tbis drei oktale Ziffern haben.\n"
+"      \\xHH\tAcht-Bit-Zeichen mit dem Wert »HH« (hexadezimal). »HH«\n"
+"    \t\tkann eine oder zwei hexadezimale Ziffern haben.\n"
+"\n"
+"    Rückgabewert:\n"
+"    Gibt »Erfolg« zurück, außer ein Ausgabefehler tritt auf."
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Ausgabe der Argumente auf die Standardausgabe.\n"
+"\n"
+"    Zeigt die Argumente auf der Standardausgabe an, gefolgt von einem\n"
+"    Zeilenumbruch.\n"
+"\n"
+"    Option:\n"
+"      -n\tkeinen Zeilenumbruch anfügen.\n"
+"\n"
+"    Rückgabewert:\n"
+"    Gibt »Erfolg« zurück, außer nach einem Schreibfehler."
+
+# enable
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"Eingebaute Shell-Kommandos aktivieren und deaktivieren.\n"
+"\n"
+"    Aktiviert und deaktiviert eingebaute Shell-Kommandos. Die Deaktivierung\n"
+"    erlaubt Ihnen, eigene Kommandos mit demselben Namen wie die eingebauten\n"
+"    Kommandos zu nutzen, ohne den kompletten Pfad angeben zu müssen.\n"
+"\n"
+"    Optionen:\n"
+"      -a\tGibt eine Liste der eingebauten Kommandos aus inklusive der\n"
+"        \tInformation, ob sie aktiv sind oder nicht.\n"
+"\n"
+"      -n\tdeaktiviert jedes angegebene Kommando oder gibt eine\n"
+"        \tListe der deaktivierten eingebauten Kommandos aus.\n"
+"      -p\tGibt eine Liste der eingebauten Kommandos in einem\n"
+"        \twiederverwendbaren Format aus.\n"
+"      -s\tGibt nur die Namen der »speziellen« in POSIX eingebauten\n"
+"        \tKommandos aus.\n"
+"\n"
+"    Optionen zum Beeinflussen des dynamischen Ladens:\n"
+"      -f\tLädt ein eingebautes Kommando aus der angegebenen Datei.\n"
+"      -d\tEntfernt ein mit »-f« geladenes Kommando.\n"
+"\n"
+"    Ohne Optionen wird jedes angegebene Kommando aktiviert.\n"
+"\n"
+"    Um das unter $PATH liegende Kommando »test« anstelle der eingebauten\n"
+"    Version zu nutzen, geben Sie »enable -n test« ein.\n"
+"\n"
+"    Rückgabewert:\n"
+"    Gibt »Erfolg« zurück, außer Name ist kein eingebautes Kommando\n"
+"    oder ein Fehler tritt auf."
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Führt die Argumente als Shellkommando aus.\n"
+"\n"
+"    Fügt die Argumente zu einer Zeichenkette zusammen und verwendet\n"
+"    das Ergebnis als Eingebe in eine Shell, welche die enthaltenen\n"
+"    Kommandos ausführt.\n"
+"\n"
+"    Rückgabewert:\n"
+"    Der Status des Kommandos oder Erfolg, wenn das Kommando leer war."
+
+# getopts
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"Verarbeitet Optionsargumente.\n"
+"\n"
+"    Getopts wird von Shell-Prozeduren verwendet, um die\n"
+"    Kommandozeilenoptionen auszuwerten.\n"
+"\n"
+"    \"Optionen\" enthält die auszuwertenden Buchstaben. Ein Doppelpunkt\n"
+"    nach dem Buchstaben zeigt an, dass ein Argument erwartet wird,\n"
+"    welches durch ein Leerzeichen von der Option getrennt ist.\n"
+"\n"
+"    Bei jedem Aufruf von »getopts« wird die nächste Option der\n"
+"    $Variable zugewiesen. Diese wird angelegt, falls sie noch\n"
+"    nicht existiert. Weiterhin wird der Index des nächsten zu\n"
+"    verarbeitenden Arguments der Shell-Variablen OPTIND\n"
+"    zugewiesen. OPTIND wird bei jedem Aufruf einer Shell oder eines\n"
+"    Shell-Skripts mit 1 initialisiert. Wenn eine Option ein Argument\n"
+"    benötigt, wird dieses OPTARG zugewiesen.\n"
+"\n"
+"    Für Fehlermeldungen gibt es zwei Varianten. Wenn das erste\n"
+"    Zeichen des Optionsstrings ein Doppelpunkt ist, wird der stille\n"
+"    Fehlermodus von »getopts« verwendet. In diesem Modus wird keine\n"
+"    Fehlermeldung ausgegeben. Wenn eine ungültige Option erkannt wird,\n"
+"    wird das gefundene Optionenzeichen OPTARG zugewiesen. Wenn ein\n"
+"    benötigtes Argument fehlt, wird ein »:« der Variable zugewiesen\n"
+"    und OPTARG auf das gefundene Optionenzeichen gesetzt. Im anderen\n"
+"    Fehlermodus wird ein »?« der Variable zugewiesen, OPTARG geleert\n"
+"    und eine Fehlermeldung ausgegeben.\n"
+"\n"
+"    Wenn die Shell-Variable OPTERR den Wert »0« hat, werden durch getopts\n"
+"    keine Fehlermeldungen ausgegeben, auch wenn das erste Zeichen\n"
+"    von OPTSTRING kein Doppelpunkt ist. OPTERR hat den Vorgabewert »1«.\n"
+"\n"
+"    Wenn im Aufruf von »getops« die »Argumente« angegeben sind, werden "
+"diese\n"
+"    verarbeitet. Ansonsten werden die von der Position abhängigen\n"
+"    Parameter ($1, $2, etc.) verarbeitet.\n"
+"\n"
+"    Rückgabewert:\n"
+"    Gibt »Erfolg« zurück wenn eine Option gefunden wird und\n"
+"    »gescheitert«, wenn das Ende der Optionen erreicht oder ein Fehler\n"
+"    aufgetreten ist."
+
+# exec
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"Ersetzt die Shell durch das angegebene Kommando.\n"
+"\n"
+"    Führt das angegebene Kommando einschließlich dessen Optionen an\n"
+"    Stelle der Shell aus. Wenn kein Kommando angegeben ist, wirken\n"
+"    alle Weiterleitungen für die aktuellen Shell.\n"
+"\n"
+"    Optionen:\n"
+"      -a Name\tSetzt den Namen als nulltes Argument für das Kommando.\n"
+"      -c\tFührt das Kommando in einer leeren Umgebung aus.\n"
+"      -l\tSetzt einen Strich in das nullte Argument für das Kommando.\n"
+"\n"
+"    Wenn das Kommando nicht ausgeführt werden kann, wird eine nicht\n"
+"    interaktive Shell beendet, außer die Shell-Option »execfail« ist\n"
+"    gesetzt.\n"
+"\n"
+"    Rückgabewert:\n"
+"    Gibt »Erfolg« zurück, außer das Kommando wurde nicht gefunden oder\n"
+"    ein Weiterleitungsfehler trat auf."
+
+# exit
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Beendet die aktuelle Shell.\n"
+"\n"
+"    Beendet die aktuelle Shell mit dem Rückgabewert N. Wenn N nicht "
+"angegeben\n"
+"    ist, wird der Rückgabewert des letzten ausgeführten Kommandos übernommen."
+
+# logout
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Beendet eine Login-Shell.\n"
+"\n"
+"    Beendet eine Login-Shell mit dem Rückgabewert »n«. Wenn logout\n"
+"    nicht von einer Login-Shell aus ausgeführt wurde, wird ein Fehler\n"
+"    zurückgegeben."
+
+# fc
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Bringt einen Job in den Vordergrund.\n"
+"\n"
+"    Bringt den mit JOB_SPEC bezeichneten Prozess als aktuellen Job in den\n"
+"    Vordergrund. Wenn JOB_SPEC nicht angegeben ist, wird der zuletzt\n"
+"    angehaltene Job verwendet.\n"
+"\n"
+"    Rückgabewert:\n"
+"    Status des in den Vordergrund geholten Jobs oder Fehler."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Bringt einen Job in den Hintergrund.\n"
+"\n"
+"    Bringt den mit JOB_SPEC bezeichneten Job in den Hintergrund,\n"
+"    als ob er mit »&« gestartet wurde.\n"
+"\n"
+"    Rückgabewert:\n"
+"    Immer Erfolg, außer wenn die Jobsteuerung nicht verfügbar ist\n"
+"    oder ein Fehler auftritt."
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+
+# help
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Informationen zu eingebauten Kommandos.\n"
+"\n"
+"    Zeigt kurze Informationen zu eingebauten Kommandos an. Wenn ein\n"
+"    Muster angegeben ist, dann wird eine ausführliche Anleitung zu\n"
+"    allen Kommandos mit zutreffendem Muster angezeigt. Sonst wird die\n"
+"    Liste der Hilfethemen ausgegeben.\n"
+"\n"
+"    Optionen:\n"
+"      -d\tKurzbeschreibung für jedes Thema\n"
+"      -m\tAnzeige im Manpage-Format.\n"
+"      -s\tGibt eine kurze Zusammenfassung für jedes angegebene\n"
+"        \tangegebene Thema aus\n"
+"\n"
+"    Argumente:\n"
+"      Muster\tDas gesuchte Hilfetheme\n"
+"\n"
+"    Rückgabestatus:\n"
+"    Erfolg, außer wenn das Muster nicht gefunden oder eine ungültige Option\n"
+"    angegeben wurde."
+
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+
+# [
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Wertet einen bedingten Ausdruck aus.\n"
+"\n"
+"    Dieses Kommando entspricht dem Kommando »test«. Jedoch muss das\n"
+"    letzte Argument ein »]« sein, welches die öffnende Klammer »[«\n"
+"    schließt."
+
+# times
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Zeigt den Zeitverbrauch an.\n"
+"\n"
+"    Gibt den kumulierte Nutzer- und Systemzeitverbrauch der Shell und\n"
+"    aller von ihr gestarteten Prozesse aus.\n"
+"\n"
+"    Rückgabewert:\n"
+"    Immer 0."
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+
+#: builtins.c:1431
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+
+#: builtins.c:1502
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+
+# (( ))
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Wertet arithmetische Ausdrücke aus.\n"
+"\n"
+"    Der Ausdruck wird nach den Regeln für arithmetische Berechnungen\n"
+"    ausgewertet. Diese Schreibweise entspricht »let Ausdruck«.\n"
+"\n"
+"    Rückgabewert: \n"
+"    Gibt »1« zurück, wenn die Auswertung des letzten Arguments Null\n"
+"    ergibt, sonst »0«."
+
+# [[
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"Erweiterte Vergleiche.\n"
+"    \n"
+"    Der Status 0 oder 1 wird abhängig vom Vergleichsergebnis zurückgegeben.\n"
+"    Es werden die gleichen Ausdrücke wie in der »test« Funktion "
+"unterstützt,\n"
+"    die mit folgenden Operatoren verbunden werden können:\n"
+"    \n"
+"      ( AUSDRUCK )\tErgibt den Wert des AUSDRUCKs\n"
+"      ! Ausdruck\t\tNegiert den AUSDRUCK\n"
+"      AUSDR1 && AUSDR2\tUnd Verknüpfung der Ausdrücke\n"
+"      AUSDR1 || AUSDR2\tOder Verknüpfung der Ausdrücke\n"
+"    \n"
+"    Die `==' und `!=' Operatoren ermöglichen einen Mustervergleich mit dem\n"
+"    rechten Ausdruck als Muster.\n"
+"    Der `=~' Operator führt einen Vergleich mit dem regulären Ausdruck\n"
+"    in der rechten Seite aus.\n"
+"    \n"
+"    Die && und || Operatoren werten AUSDR2 nur aus, wenn nicht bereits\n"
+"    AUSDR1 das gesamte Ergebnis bestimt.\n"
+"    \n"
+"    Rückgabewert:\n"
+"    0 oder 1 abhängig vom Wert des AUSDRUCKs."
+
+# variable_help
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"    BASH_VERSION\tVersionsnummer der Bash.\n"
+"    CDPATH\tEine durch Doppelpunkte getrennte Liste von\n"
+"                Verzeichnissen, die durchsucht werden, wenn das\n"
+"                Argument von »cd« nicht im aktuellen Verzeichnis\n"
+"                gefunden wird.\n"
+"    GLOBIGNORE  Eine durch Doppelpunkte getrennte Liste von\n"
+"                Dateinamenmustern, die für die Dateinamensergänzung\n"
+"                ignoriert werden.\n"
+"    HISTFILE\tDatei, die den Kommandozeilenspeicher enthält.\n"
+"    HISTFILESIZE\tMaximale Zeilenanzahl dieser Datei.\n"
+"    HISTSIZE\tMaximale Anzahl von Zeilen, auf die der\n"
+"                Historymechanismus der Shell zurückgreifen kann.\n"
+"    HOME\tHeimatverzeichnis des aktuellen Benutzers.\n"
+"    HOSTNAME    Der aktuelle Rechnername.\n"
+"    HOSTTYPE\tCPU-Typ des aktuellen Rechners.\n"
+"    IGNOREEOF\tLegt die Reaktion der Shell auf ein EOF-Zeichen fest.\n"
+"                Wenn die Variable eine ganze Zahl enthält, wird diese\n"
+"                Anzahl EOF Zeichen (Ctrl-D) abgewartet, bis die Shell\n"
+"                verlassen wird. Der Vorgabewert ist 10. Ist IGNOREEOF\n"
+"                nicht gesetzt, signalisiert EOF das Ende der Eingabe.\n"
+"    MACHTYPE    Eine Zeichenkette die das aktuell laufende System "
+"beschreibt.\n"
+"    MAILCHECK\tZeit in Sekunden, nach der nach E-Mails gesehen wird.\n"
+"    MAILPATH\tEine durch Doppelpunkt getrennte Liste von Dateinamen,\n"
+"                die nach E-Mail durchsucht werden.\n"
+"    OSTYPE\tUnix Version, auf der die Bash gegenwärtig läuft.\n"
+"    PATH\tDurch Doppelpunkt getrennte Liste von Verzeichnissen,\n"
+"                die nach Kommandos durchsucht werden.\n"
+"    PROMPT_COMMAND\tKommando, das vor der Anzeige einer primären\n"
+"                        Eingabeaufforderung (PS1) ausgeführt wird.\n"
+"    PS1                 Zeichenkette, die die primäre\n"
+"                        Eingabeaufforderung enthält.\n"
+"    PS2                 Zeichenkette, die die sekundäre\n"
+"                        Eingabeaufforderung enthält.\n"
+"    PWD                 Der vollständige aktuelle Verzeichnisname.\n"
+"    SHELLOPTS           Durch Doppelpunkt getrennte Liste der aktiven\n"
+"                        Shell-Optionen.\n"
+"    TERM\tName des aktuellen Terminaltyps.\n"
+"    auto_resume Ein Wert ungleich Null bewirkt, dass ein einzelnes\n"
+"                Kommando auf einer Zeile zunächst in der Liste\n"
+"                gegenwärtig gestoppter Jobs gesucht und dieser in den\n"
+"                Vordergrund geholt wird. »exact« bewirkt, dass das\n"
+"                Kommando genau dem Kommando in der Liste der\n"
+"                gestoppten Jobs entsprechen muss. Wenn die Variable den\n"
+"                Wert »substring« enthält, muss das Kommando einem\n"
+"                Substring der Jobbezeichnung entsprechen. Bei einem\n"
+"                anderen Wert müssen die ersten Zeichen übereinstimmen.\n"
+"    histchars   Zeichen, die die Befehlswiederholung und die\n"
+"                Schnellersetzung steuern. An erster Stelle steht\n"
+"                das Befehlswiederholungszeichen (normalerweise\n"
+"                `!'); an zweiter das `Schnell-Ersetzen-Zeichen'\n"
+"                (normalerweise `^'). Das dritte Zeichen ist das\n"
+"                `Kommentarzeichen' (normalerweise `#').\n"
+"    HISTIGNORE  Eine durch Doppelpunkt getrennte Liste von\n"
+"                Mustern, welche die in der\n"
+"                Befehlswiederholungsliste zu speichernden\n"
+"                Kommandos angibt.\n"
+
+# pushd
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Fügt ein Verzeichnis dem Stapel hinzu.\n"
+"\n"
+"    Legt einen Verzeichnisnamen auf den Verzeichnisstapel oder rotiert\n"
+"    diesen so, dass das aktuelle Arbeitsverzeichnis oben liegt. Ohne\n"
+"    Argumente werden die obersten zwei Verzeichnisse auf dem Stapel\n"
+"    vertauscht.\n"
+"\n"
+"    Optionen: -n Es wird nur das angebene Verzeichnis dem Stapel\n"
+"    \thinzugefügt, aber nicht in das Verzeichnis gewechselt.\n"
+"\n"
+"    Argumente:    \n"
+"    +N\tRotiert den Stapel so, dass das N'te Verzeichnis (angezeigt\n"
+"        von `dirs', gezählt von links) oben auf dem Stapels liegt.\n"
+"\n"
+"    -N\tRotiert den Stapel so, dass das N'te Verzeichnis (angezeigt\n"
+"        von `dirs', gezählt von rechts) sich an der Spitze des Stapels\n"
+"    \tbefindet.\n"
+"\n"
+"    Der Verzeichnisstapel kann mit dem Kommando `dirs' angezeigt\n"
+"    werden.\n"
+"\n"
+"    Rückgabewert: \n"
+"    Gibt Erfolg zurück, außer wenn ein ungültiges Argument angegeben\n"
+"    wurde oder der Verzeichniswechsel nicht erfolgreich war."
+
+# popd
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Entfernt Einträge vom Verzeichnisstapel.\n"
+"\n"
+"    Entfernt Einträge vom Verzeichnisstapel. Ohne Argumente wird der\n"
+"    oberste Eintrag entfernt und in das neue oberste Verzeichnis\n"
+"    gewechselt.\n"
+"\n"
+"    Optionen:\n"
+"    -n\tEntfernt nur den Verzeichniseintrag und wechselt nicht\n"
+"       \tdas Verzeichnis.\n"
+"          \n"
+"    Argumente:\n"
+"    +N\tEntfernt den N-ten Eintrag von links, gezählt von\n"
+"        Null, aus der von »dirs« anzeigten Liste. Beispielsweise\n"
+"        entfernen »popd +0« den ersten und »popd +1« den zweiten\n"
+"        Verzeichniseintrag.\n"
+"\n"
+"    -N\tEntfernt den N-ten Eintrag von rechts, gezählt von Null,\n"
+"      \taus der von »dirs« angeigten Liste. Beispielsweise entfernen\n"
+"        »popd -0« den letzten und »popd -1« den vorletzten\n"
+"        Verzeichniseintrag.\n"
+"\n"
+"        Mit »dirs« kann der Verzeichnisstapel angezeigt werden.\n"
+"\n"
+"        Rückgabewert:\n"
+"        Gibt 0 zurück, außer wenn ein ungültiges Argument angegeben\n"
+"        wurde oder der Verzeichniswechsel nicht erfolgreich war."
+
+# dirs
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Zeigt den Verzeichnisstapel an.\n"
+"\n"
+"    Zeigt die Liste der gegenwärtig gespeicherten Verzeichnisse.\n"
+"    Diese werden mit dem `pushd' Kommando eingetragen und mit dem\n"
+"    `popd' Kommando ausgelesen.\n"
+"\n"
+"    Optionen:\n"
+"      -c        Löscht den Verzeichnisstapel.\n"
+"      -l        Keine Abkürzung für das Heimatverzeichnis durch die\n"
+"                Tilde (~).\n"
+"      -p        Ausgabe von einem Eintrag pro Zeile.\n"
+"      -v        Ausgabe von einem Eintrag pro Zeile mit Angabe der\n"
+"                Position im Stapel<\n"
+"\n"
+"    Argumente:\n"
+"      +N        Gibt das N'te Element von links der Liste aus, die\n"
+"                ohne Argumente ausgegeben wird.  Die Zählung beginnt\n"
+"                bei 0.\n"
+"      -N        Gibt das N'te Element von rechts der Liste aus, die\n"
+"                ohne Argumente ausgegeben wird.  Die Zählung beginnt\n"
+"                bei 0.\n"
+"\n"
+"    Rückgabewert:\n"
+"    Gibt Erfolg zurück, außer bei einer ungültigen Option oder wenn\n"
+"    ein Fehler auftritt."
+
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"Setzt oder löscht Shell-Optionen.\n"
+"\n"
+"    Ändert die in »Optionsnamen« genannten Shell-Optionen. Ohne\n"
+"    Argumente wird eine Liste der Shell-Optionen und deren Status\n"
+"    ausgegeben.\n"
+"\n"
+"    Optionen:\n"
+"      -o        Beschränkt die Optionsmanen auf die, welche mit \n"
+"                »set -o« definiert werden müssen.\n"
+"      -p        Gibt alle Shelloptionen und deren Status aus.\n"
+"      -q        Unterdrückt Ausgaben.\n"
+"      -s        Setzt jede Option in »Optionsname.«\n"
+"      -u        Deaktiviert jede Option in »Optionsname«.\n"
+"\n"
+"    Rückgabewert:\n"
+"    Gibt Erfolg zurück, wenn eine Option gesetzt worden ist. Wenn\n"
+"    eine ungültige Option angegeben wurde oder eine Option deaktiviert\n"
+"    worden ist, wird ein Fehler zurückgegeben."
+
+# printf
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"Formatierte Ausgabe der ARGUMENTE.\n"
+"\n"
+"    Optionen:\n"
+"      -v var\tDie formatierte Ausgabe ver Variable var zuweisen statt\n"
+"        \tsie an die Standardausgebe zu senden.\n"
+"\n"
+"    Die FORMAT-Zeichenkette kann einfache Zeichen enthalten, die "
+"unverändert\n"
+"    an die Standardausgabe geschickt werden. Escape-Sequenzen werden "
+"umgewandelt\n"
+"    und an die Standardausgabe geschickt sowie Formatanweisungen, welche "
+"das \n"
+"    nachfolgende ARGUMENT auswerten und ausgeben.\n"
+"\n"
+"    Gegenüber der in printf(1) beschriebenen Standardverion werden "
+"zusätzliche\n"
+"    Formatanweisungen ausgewertet:\n"
+"\n"
+"      %b\tWertet Escape-Sequenzen des zugehörigen Arguments aus.\n"
+"      %q\tBettet das Argument so ein, dass es als Shelleingabe\n"
+"                verwendet werden kann.\n"
+"      %(fmt)T\tAusgabe der aus FMT entstehende Datum-Zeit Zeichenkette, "
+"dass\n"
+"                sie als Zeichenkette für strftime(3) verwendet werden kann.\n"
+"\n"
+"    Die Formatangabe wird wiederverwendet, bis alle Argumente ausgewertet\n"
+"    sind. Wenn weniger Argumente als Formatangaben vorhanden sind, werden "
+"für\n"
+"    die Argumente Nullwerte bzw. leere Zeichenketten eingesetzt.\n"
+"\n"
+"    Rücgabewert:\n"
+"    Gibt Erfolg zurück, außer es wird eine ungültige Option angegeben oder "
+"ein\n"
+"    Aus- bzw. Zuweisungsfehler auftritt."
+
+#: builtins.c:1971
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+# compgen
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Zeigt mögliche Komplettierungen.\n"
+"\n"
+"    Wird in Shellfunktionen benutzt, um mögliche Komplettierungen "
+"anzuzeigen.\n"
+"    Wenn das optionale Wort-Argument angegeben ist, werden Komplettierungen\n"
+"    für dieses Wort erzeugt.\n"
+"    \n"
+"    Rückgabewert:\n"
+"    Falsche Optionen oder Fehler führen zu Rückgabewerten ungleich Null."
+
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+
+# readarray
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Liest Zeilen einer Datei in eine Array-Variable.\n"
+"\n"
+"    Ist ein Synonym für »mapfile«."
+
+# https://lists.gnu.org/archive/html/bug-bash/2019-09/msg00025.html
+#~ msgid "Unknown Signal #"
+#~ msgstr "Unbekannte Signalnummer"
diff --git a/po/el.gmo b/po/el.gmo
new file mode 100644
index 0000000..97304da
--- /dev/null
+++ b/po/el.gmo
diff --git a/po/el.po b/po/el.po
new file mode 100644
index 0000000..ed9fb5b
--- /dev/null
+++ b/po/el.po
@@ -0,0 +1,4613 @@
+# translation of bash to Greek
+# Copyright (C) 2013 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+#
+# Lefteris Dimitroulakis <ledimitro@gmail.com>, 2013, 2016, 2017.
+msgid ""
+msgstr ""
+"Project-Id-Version: bash-4.4\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2017-06-21 17:08+0300\n"
+"Last-Translator: Lefteris Dimitroulakis <ledimitro@gmail.com>\n"
+"Language-Team: Greek <team@lists.gnome.gr>\n"
+"Language: el\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"X-Generator: Lokalize 1.5\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "κακός δείκτης πίνακα"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr "%s: αφαί�εση του χα�ακτη�ιστικο� nameref "
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: αδυναμία μετατ�οπής indexed πίνακα σε associative πίνακα "
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: μη έγκυ�ο κλειδί associative πίνακα "
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: αδυναμία εκχώ�ησης σε μη α�ιθμητικό δείκτη "
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr ""
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: αδυναμία δημιου�γίας: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr "bash_execute_unix_command: δεν μπο�ώ να β�ω keymap για εντολή"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: ο π�ώτος μη-λευκό διάστημα χα�ακτή�ας δεν είναι «\"» "
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "όχι «%c» κλεισήματος σε %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: απουσιάζει διαχω�ιστής δίστιγμο "
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "«%s»: αδυναμία αποσ�νδεσης"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr "brace expansion: αδυναμία εκχώ�ησης μνήμης για %s "
+
+#: braces.c:406
+#, fuzzy, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr "brace expansion: αδυναμία εκχώ�ησης μνήμης για %d στοιχεία "
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr "brace expansion: αδυναμία εκχώ�ησης μνήμης για «%s»"
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "«%s»: μη έγκυ�ο ψευδώνημο"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "μη ενε�γοποιημένο line editing"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "«%s»: μη έγκυ�ο όνομα keymap"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: αδυναμία ανάγνωσης: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "«%s»: άγνωστο όνομα συνά�τησης"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s δεν έχει συνδεθεί με κανένα πλήκτ�ο.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s μπο�εί να κληθεί μέσω "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "«%s»: αδυναμία αποσ�νδεσης"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "α�ιθμός β�όχων"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "έχει μόνο νόημα σε ένα β�όχο «for», «while», ή «until»"
+
+#: builtins/caller.def:136
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "HOME δεν έχει ο�ιστεί"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "πά�α πολλά ο�ίσματα"
+
+#: builtins/cd.def:342
+msgid "null directory"
+msgstr "κατάλογος nul"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "OLDPWD δεν έχει ο�ιστεί"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "γ�αμμή %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "π�οειδοποίηση: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: χ�ήση: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: η επιλογή απαιτεί ό�ισμα"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: απαιτείται α�ιθμητικό ό�ισμα"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: δεν β�έθηκε"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: μη έγκυ�η επιλογή"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: μη έγκυ�ο όνομα επιλογής"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "«%s»: μή έγκυ�ο αναγνω�ιστικό "
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "μη έγκυ�ος οκταδικός α�ιθμός"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "μη έγκυ�ος εξαδικός α�ιθμός"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "μη έγκυ�ος α�ιθμός"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: μη έγκυ�η π�οδιαγ�αφή σήματος"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "«%s»: όχι pid ή έγκυ�ο job spec"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: μεταβλητή μόνο για ανάγνωση"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s εκτός ο�ίων"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "ό�ισμα"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s εκτός ο�ίων"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: δεν υπά�χει τέτοια ε�γασία"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: όχι έλεγχος εγασιών "
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "όχι έλεγχος ε�γασιών"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: πε�ιο�ισμένο "
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "πε�ιο�ισμένο"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: όχι ένα builtin κελ�φους "
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "σφάλμα εγγ�αφής: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "σφάλμα κατά τον ο�ισμό των χα�ακτη�ιστικών τε�ματικο�: %s "
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "σφάλμα κατά την λήψη των χα�ακτη�ιστικών τε�ματικο�: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: σφάλμα κατά την ανάκτηση τ�έχοντος καταλόγου: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: ασαφείς π�οδιαγ�αφές ε�γασίας"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr "βοήθεια μη διαθέσιμη σ' αυτήν την έκδοση "
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: αδυναμία unset: %s μόνο για ανάγνωση"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: αδυναμία «unset»"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: μη έγκυ�ο όνομα ενέ�γειας"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: δεν υπά�χει π�οδιαγ�αφή συμπλή�ωσης"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "π�οειδοποίηση: η επιλογή -F μπο�εί να μη δουλέψει όπως πε�ιμένεις"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "π�οειδοποίηση: η επιλογή -C ίσως δεν δουλέψει όπως αναμένετε"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "η λειτου�γία συμπλή�ωσης δεν εκτελείται επί του πα�όντος "
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "μπο�εί να χ�ησιμοποιηθεί μόνο μέσα σε συνά�τηση"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr "%s: η μεταβλητή αναφο�άς δεν μπο�εί να είναι πίνακας "
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr "%s: nameref αυτοαναφο�ά μεταβλητής δεν επιτ�έπεται "
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s: κυκλική αναφο�ά ονόματος "
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "«%s»: μη έγκυ�ο όνομα μεταβλητής για όνομα αναφο�άς "
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr ""
+"η επιλογή «-f» δεν μπο�εί να χ�ησιμοποιηθεί για τη δημιου�γία συνα�τήσεων"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: συνά�τηση μόνο για ανάγνωση"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr "%s: η σ�νθετη εκχώ�ηση πίνακα απο��ίφθηκε"
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: αδυναμία καταστ�οφής μεταβλητής πίνακα κατ' αυτόν τον τ�όπο "
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: αδυναμία μετατ�οπής associative πίνακα σε indexed πίνακα "
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "δυναμική φό�τωση μη διαθέσημη"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "αδυναμία ανοίγματος κοινόχ�ηστου αντικειμένου %s: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "αδυναμία ε��εσης %s στο κοινόχ�ηστο αντικείμενο %s: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: δεν φο�τώθηκε δυναμικά"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr "Η συνά�τηση φο�τώματος του %s επιστ�έφει λάθος (%d): δεν φο�τώθηκε "
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: δεν φο�τώθηκε δυναμικά"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: αδυναμία διαγ�αφής: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: είναι κατάλογος"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: όχι κανονικό α�χείο"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: α�χείο πολ� μεγάλο"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: αδυναμία εκτέλεσης δυαδικο� α�χείου"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: αδυναμία εκτέλεσης: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "logout\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "όχι login shell: χ�ησιμοποίησε «exit»"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Υπά�χουν σταματημένες ε�γασίες.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Υπά�χουν ε�γασίες που τ�έχουν.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "δεν β�έθηκε εντολή"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "history specification"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: αδυναμία ανοίγματος π�οσω�ινο� α�χείου: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "τ�έχων"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "η ε�γασία %d ξεκίνησε χω�ίς έλεγχο ε�γασιών "
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: μη επιτ�επόμενη επιλογή -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: η επιλογή απαιτεί ένα ό�ισμα -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "hashing απενε�γοποιημένο "
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: πίνακας hash κενός\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "hits\tcommand\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Εντολές κελ�φους που ται�ιάζουν στη λέξη-κλειδί `"
+msgstr[1] "Εντολές κελ�φους που ται�ιάζουν στις λέξεις-κλειδί"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"ουδεμία βοήθεια ται�ιάζει με «%s».  Δοκιμάστε «help help» ή «man -k %s» ή "
+"«info %s»."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: αδυναμία ανοίγματος: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Αυτές οι εντολές ο�ίζονται εσωτε�ικά. Δώσε «help» για να δεις την λίστα.\n"
+"Δώσε «help name» για να δεις πε�ισσότε�α για την συνά�τηση «name».\n"
+"Χ�ησιμοποίησε «info bash» για να β�εις πε�ισσότε�α σχετικά με το κέλυφος.\n"
+"Χ�ησιμοποίησε «man -k» ή «info» για να β�εις πε�ισσότε�α για εντολές από την "
+"λίστα.\n"
+"\n"
+"Αστε�ίσκος (*) δίπλα στο όνομα σημαίνει ότι η εντολή είναι "
+"απενε�γοποιημένη.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "δεν μπο�ώ να χ�ησιμοποιήσω πε�ισσότε�ες της μιας από τις -anrw"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "θέση στο ιστο�ικό"
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: μη έγκυ�η χ�ονοσήμανση"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr ""
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: αποτυχία inlib"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "δεν επιτ�έπονται άλλες επιλογές με την «-x»"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: ο�ίσματα π�έπει να είναι ID διε�γασιών ή ε�γασιών"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Άγνωστο σφάλμα"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "αναμενόταν έκφ�αση"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: μη δικτοδοτημένος πίνακας"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: μη έγκυ�η π�οδιαγ�αφή πε�ιγ�αφέα α�χείου"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: μη έγκυ�ος πε�ιγ�αφέας α�χείου: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: μη έγκυ�ος α�ιθμός γ�αμμής"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: μη έγκυ�η α�χή πίνακα "
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: μη έγκυ�ο κβάντο του callback "
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "όνομα μεταβλητής πίνακα κενό "
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "απαιτείται υποστή�ιξη μεταβλητής πίνακος"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "«%s»: απουσία χα�ακτή�α φο�μα�ίσματος   "
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "«%c»: μη έγκυ�η π�οδιαγ�αφή για φο�μά χ�όνου"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "«%c»: μη έγκυ�ος χα�ακτή�ας φο�μα�ίσματος"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "π�οειδοποίηση: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "π�όβλημα ανάλυσης του format: %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "απουσία hex ψηφίου για \\x"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "απουσία ψηφίου unicode για \\%c"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "όχι άλλος κατάλογος"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s: μη έγκυ�ο ό�ισμα"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<όχι τ�έχων κατάλογος>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "κενή στίβα καταλόγου"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "δείκτης στοίβας καταλόγου"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: μη έγκυ�η π�οδιαγ�αφή timeout "
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "σφάλμα ανάγνωσης: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr "«επιστ�οφή» είναι μόνο δυνατή από συνά�τηση ή sourced script "
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "«unset» δεν μπο�εί να εφα�μοστεί συγχ�όνως σε συνά�τηση και μεταβλητή"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: δεν είναι μεταβλητή πίνακα"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: δεν είναι συνά�τηση"
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr "%s: αδυναμία εξαγωγής"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "α�ιθμός του « shift »"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr ""
+"οι επιλογές κελ�φους δεν είναι δυνατόν συγχ�όνως να ενε�γοποιηθο�ν και "
+"απενε�γοποιηθο�ν"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: μη έγκυ�ο όνομα επιλογής"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "απαιτείται όνομα α�χείου για ό�ισμα"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: α�χείο δεν β�έθηκε"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "αναστολή αδ�νατη "
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "ένα κέλυφος σ�νδεσης δεν μπο�εί ν' ανασταλεί "
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s είναι ψευδώνημο του «%s»\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s αποτελεί δεσμευμένη λέξη του κελ�φους\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s είναι συνά�τηση\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s είναι ένα ειδικό builtin\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s είναι ένα builtin κελ�φους\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s είναι %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s is hashed (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: μη έγκυ�ο ό�ισμα ο�ίου"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "«%c»: λάθος διαταγή"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: αδ�νατον να πά�ω το ό�ιο: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "ό�ιο"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: αδυναμία μεταβολής ο�ίου: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "οκταδικός α�ιθμός"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "`%c': μη έγκυ�ος τελεστής συμβολικο� mode"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "`%c': μη έγκυ�ος χα�ακτή�ας συμβολικο� mode "
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " γ�αμμή "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "τελευταία εντολή: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Ακ��ωση..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr "INFORM: "
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "σφάλμα άγνωστης εντολής"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "λάθος τ�πος εντολής"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "bad connector"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "κακό άλμα"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: μεταβλητή χω�ίς σ�νδεση "
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\aη αναμονή για δεδομένα έληξε: αυτόματη αποσ�νδεση\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "αδυναμία ανακατε�θυνσης τυπικής εισόδου από /dev/null: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "TIMEFORMAT: «%c»: μη έγκυ�ος χα�ακτή�ας μο�φοποίησης"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr "execute_coproc: coproc [%d:%s] υφίσταται ακόμη "
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "pipe error"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr "eval: μέγιστο επίπεδο φωλιάσματος eval ξεπε�άστηκε (%d) "
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr "%s: μέγιστο επίπεδο φωλιάσματος source ξεπε�άστηκε (%d) "
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr "%s: μέγιστο επίπεδο φωλιάσματος συνά�τησης ξεπε�άστηκε (%d) "
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: πε�ιο�ισμός: δεν μπο�εί να πε�ιέχεται «/» σε όνομα εντολής"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: εντολή δεν β�έθηκε"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: κακός interpreter "
+
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: αδυναμία εκτέλεσης δυαδικο� α�χείου: %s"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "«%s»: είναι ειδικό builtin"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "αδυναμία αντιγ�αφής του fd %d στον fd %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr ""
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr ""
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "συντακτικό σφάλμα στην έκφ�αση"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "απόπει�α ανάθεσης σε μη-μεταβλητή"
+
+#: expr.c:530
+#, fuzzy
+msgid "syntax error in variable assignment"
+msgstr "συντακτικό σφάλμα στην έκφ�αση"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "διαί�εση διά 0"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "bug: κακό σ�μβολο για expassign "
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "«:» αναμενόταν για μια έκφ�αση υπό συνθήκη"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "εκθέτης μικ�ότε�ος του 0"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "αναγνω�ιστικό αναμενόταν μετά από pre-increment ή pre-decrement "
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "λείπει «)»"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "syntax error: αναμενόταν τελεστέος"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "syntax error: μη έγκυ�ος α�ιθμητικός τελεστής"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (το λανθασμένο σ�μβολο είναι \"%s\")"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "μη έγκυ�η α�ιθμητική βάση"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: μη έγκυ�ος α�ιθμός γ�αμμής"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "τιμή πολ� μεγάλη για βάση"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: σφάλμα έκφ�ασης\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: αδυναμία π�όσβασης στο γονικό κατάλογο"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "αδυναμία επανάταξης nodelay mode για fd %d"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr ""
+"αδυναμία εκχώ�ησης νέου πε�ιγ�αφέα α�χείου για είσοδο του bash  από fd %d"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input: ο buffer υπά�χει ήδη για νέο fd %d "
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: pgrp pipe"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "η διε�γασία κλώνος %d εμφανίζεται στην ε�γασία που τ�έχει %d"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "διαγ�αφή σταματημένης εγασίας %d με ομάδα %ld"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process: pid %5ld (%s) μα�κα�ισμένη ως ακόμα ζωντανή "
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: δεν υπά�χει τέτοιο pid"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Σήμα %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Done"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "σταματημένο"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "σταματημένο(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "υπό εκτέλεση"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Done(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Έξοδος %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Άγνωστη κατάσταση"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(core dumped) "
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (wd: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "child setpgid (%ld to %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: διε�γασία %ld δεν αποτελεί θυγατ�ική αυτο� του κελ�φους"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: Δεν υπά�χουν στοιχεία για διε�γασία %ld"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: η ε�γασία %d είναι σταματημένη"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: δεν υπά�χει τέτοια ε�γασία"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: η ε�γασία τε�ματίστηκε"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: ε�γασία %d ήδη στο πα�ασκήνιο"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr ""
+"waitchld: ενε�γοποίηση WNOHANG ώστε ν' αποφευχθεί ο�ιστικό μπλοκά�ισμα "
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: γ�αμμή %d: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (core dumped)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(τώ�α wd: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: αποτυχία getpgrp"
+
+#: jobs.c:4447
+#, fuzzy
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr ""
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "αδυναμία ��θμισης της ομάδας της διε�γασίας του τε�ματικο� (%d) "
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "δεν υπά�χει job control σ'αυτό το κέλυφος"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: αποτυχημένη assertion: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "άγνωστο"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr ""
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: κλήθηκε με ό�ισμα ήδη ελευθε�ωμένο μπλοκ "
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: κλήθηκε με ό�ισμα ένα μη εκχω�ημένο μπλοκ "
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: εντοπίστηκε α�νητική υπε�χείληση, mh_nbytes εκτός ο�ίου "
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: εντοπίστηκε α�νητική υπε�χείληση, mh_nbytes εκτός ο�ίου "
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: τα μεγέθη των κομματιών στην α�χή και το τέλος διαφέ�ουν "
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: κλήθηκε με ό�ισμα ένα μη εκχω�ημένο μπλοκ "
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc: εντοπίστηκε α�νητική υπε�χείληση, mh_nbytes εκτός ο�ίου"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc: εντοπίστηκε α�νητική υπε�χείληση, mh_nbytes εκτός ο�ίου"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: μεγέθη κομματιών σ' α�χή και τέλος διαφέ�ουν "
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: πίνακας alloc γεμάτος με FIND_ALLOC;\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: %p ήδη στον πίνακα ως εκχω�ισμένος;\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: %p ήδη στον πίνακα ως ελε�θε�ος;\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "μη έγκυ�η βάση"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: άγνωστος host"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: μη έγκυ�η υπη�εσία"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: κακιά π�οδιαγ�αφή διαδ�ομής δικτ�ου "
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "μη υποστη�ιζόμενες δικτιακές υπη�εσίες"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: αδυναμία μεταβολής locale (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: αδυναμία μεταβολής locale (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: αδυναμία μεταβολής locale (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: αδυναμία μεταβολής locale (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "Έχεις μήνυμα στο $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "Έχεις νέο μήνυμα στο $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "Το μήνυμα στο %s διαβάστηκε\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "syntax error: απαιτείται α�ιθμητική έκφ�αση"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "συντακτικό σφάλμα: δεν αναμενόταν «;»"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "συντακτικό σφάλμα: «((%s))»"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: ο τ�πος οδηγίας δεν είναι σωστός %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr ""
+"here-document στη γ�αμμή %d με ό�ιο το τέλος του α�χείου (αντί του «%s»)"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr "make_redirection: η οδηγία της ανακατε�θυνσης «%d» εκτός ο�ίων"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+"shell_getc: shell_input_line_size (%zu) υπε�βαίνει το SIZE_MAX (%lu): γ�αμμή "
+"κόπηκε "
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr "ο μέγιστος α�ιθμός here-document ξεπε�άστηκε "
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "μη αναμενόμενο EOF κατά την αναζήτηση «%c»"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "μη αναμενόμενο EOF ενώ έψαχνα για «]]»"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "syntax error in conditional expression: μη αναμενόμενο σ�μβολο «%s»"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "συντακτικό σφάλμα σ' έκφ�αση υπό συνθήκη "
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "μη αναμενόμενο σ�μβολο «%s», αναμενόταν «)»"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "αναμενόταν «)»"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "απ�οσδόκητο ό�ισμα «%s» στον υπό αί�εση μοναδιαίο τελεστή  "
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "απ�οσδόκητο ό�ισμα για τον μοναδιαίο τελεστή "
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "απ�οσδόκητο σ�μβολο «%s» β�έθηκε αντί για δυαδικό τελεστή υπό αί�εση "
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "αναμενόταν δυαδικός τελεστής υπό αί�εση "
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "απ�οσδόκητο ό�ισμα «%s» για δυαδικό τελεστή υπό αί�εση "
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "απ�οσδόκητο ό�ισμα για δυαδικό τελεστή υπό αί�εση "
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "απ�οσδόκητο σ�μβολο «%c» σε εντολή υπό αί�εση "
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "απ�οσδόκητο σ�μβολο «%s» σε εντολή υπό αί�εση "
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "απ�οσδόκητο σ�μβολο %d σε εντολή υπό αί�εση "
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "συντακτικό σφάλμα κοντά στο μη αναμενόμενο σ�μβολο «%s»"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "συντακτικό σφάλμα κοντά σε «%s»"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "syntax error: μη αναμενόμενο τέλος α�χείου"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "συντακτικό σφάλμα"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Χ�ήση «%s» για έξοδο από το κέλυφος.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "μη αναμενόμενο EOF ενώ έψαχνα «)»"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "completion: η συνά�τηση «%s» δεν β�έθηκε"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr ""
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: NULL COMPSPEC"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr ""
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: μη έγκυ�ος πε�ιγ�αφέας α�χείου"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: NULL file pointer"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != fileno xtrace fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: «%c»: μη έγκυ�η μο�φή χα�ακτή�α"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "πε�ιγ�αφέας α�χείου εκτός ο�ίων"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: ασαφής ανακατε�θυνση"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: αδυναμία εγγ�αφής πάνω σε υπά�χον α�χείο"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: restricted: αδυναμία ανακατε�θυνσης εξόδου"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "αδυναμία δημιου�γίας π�οσω�ινο� α�χείου για here-document: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: αδυναμία ανάθεσης fd σε μεταβλητή"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "/dev/(tcp|udp)/host/port δεν υποστη�ίζεται χω�ίς δικτ�ωση"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr ""
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "δεν μπό�εσα να β�ω /tmp, πα�ακαλώ να τον δημιου�γήσετε!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp π�έπει να είναι ένα έγκυ�ο όνομα α�χείου"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr ""
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: μη έγκυ�η επιλογή"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "αδυναμία ��θμισης uid σε %d: effective uid %d "
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "αδυναμί ��θμισης gid σε %d: effective gid %d "
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr "αδυναμία εκκίνησης του debugger, debugging απενε�γοποιημένο  "
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr "%s: είναι κατάλογος"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "Δεν έχω όνομα!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, έκδοση %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Χ�ήση:\t%s [μακ�ά επιλογή GNU] [επιλογή] ...\n"
+"\t%s [μακ�ά επιλογή GNU] [επιλοη] script-file ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "Μακ�ές επιλογές GNU:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Επιλογές κελ�φους:\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-ilrsD ή -c εντολή ή -O shopt_option\t\t(invocation only)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s ή επιλογή -o\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+"Πληκτ�ολόγησε «%s -c \"help set\"» για πλη�οφο�ίες επί των επιλογών "
+"κελ�φους.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr ""
+"Πληκτ�ολόγησε «%s -c help» για πε�ισσότε�ες πλη�οφο�ίες σχετικά με τις "
+"ενσωματομένες στο κέλυφος εντολές.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "Χ�ησιμοποίησε την εντολή «bashbug» για αναφο�ά σφαλμάτων.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr "σελίδα του bash: <http://www.gnu.org/software/bash>\n"
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr ""
+"Γενική βοήθεια για την χ�ήση του λογισμικο� GNU: <http://www.gnu.org/gethelp/"
+">\n"
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: μη έγκυ�η λειτου�γία"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Ψε�τικο σήματος "
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Hangup"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Διακοπή"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Quit"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Μη έγκυ�η οδηγία"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "BPT trace/trap"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "οδηγία ABORT"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "οδηγία EMT"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Εξαί�εση κινητής υποδιαστολής"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Killed"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Bus error"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Σφάλμα κατάτμησης"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Κακή κλήση συστήματος "
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Σπασμένη σωλήνα"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Ρολόι συναγε�μο�"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "τε�ματισμός"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Επείγουσα κατάσταση IO"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Σταματημένο (σήμα)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Συνέχεια"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Child death or stop"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Σταματημένο (είσοδος tty)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Σταματημένο (έξοδος tty)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "I/O ready"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "ό�ιο CPU"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "Ό�ιο α�χείου"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Alarm (virtual)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Alarm (profile)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Πα�άθυ�ο άλλαξε"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr ""
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Σήμα χ�ήστη 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Σήμα χ�ήστη 2 "
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "Δεδομένα εισόδου HFT στην αναμονή"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "επικείμενη έλλειψη �ε�ματος"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "επικείμενη πτώση συστήματος"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "μετανάστευση διε�γασίας σε άλλη CPU"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "π�ογ�αμματιστικό σφάλμα"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr ""
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr ""
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr ""
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "Αίτηση για πλη�οφο�ίες"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "Άγνωστο σήμα #%d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "κακή αντικατάσταση: όχι «%s» που κλείνει στο %s"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: αδυναμία εκχώ�ησης λίστας σε στοιχείο του πίνακα "
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "αδυναμία δημιου�γίας σωλήνα για αντικατάσταση διε�γασίας  "
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "αδυναμία δημιου�γίας θυγατ�ικής για αντικατάσταση διε�γασίας "
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "αδυναμία ανοίγματοε επώνυμης σωλήνας %s π�ος ανάγνωση"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "αδυναμία ανοίγματος επώνυμης σωλήνας %s π�ος εγγ�αφή"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "αδυναμία αναπα�αγωγής named pipe %s ως fd %d "
+
+#: subst.c:6213
+msgid "command substitution: ignored null byte in input"
+msgstr "αντικατάσταση εντολής: null byte αγνοήθηκε στην είσοδο "
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "αδυναμία δημιου�γίας σωλήνα για αντικατάσταση εντολής "
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "αδυναμία δημιου�γίας θυγατ�ικής για αντικατάσταση εντολής "
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute: αδυναμία αναπα�αγωγής σωλήνα ως fd 1 "
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: μη έγκυ�ο όνομα μεταβλητής ως όνομα αναφο�άς "
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: μη έγκυ�η έμμεση επέκταση "
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr "%s: μη έγκυ�ο όνομα μεταβλητής"
+
+#: subst.c:7256
+#, fuzzy, c-format
+msgid "%s: parameter not set"
+msgstr "%s: πα�άμετ�ος κενή ή δεν έχει ο�ιστεί"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: πα�άμετ�ος κενή ή δεν έχει ο�ιστεί"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: έκφ�αση α�νητική < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: κακή αντικατάσταση"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: αδ�νατη ανάθεση κατ' αυτόν τον τ�όπο"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+"μελλοντικές εκδόσεις του κελ�φους θα επιβάλουν την αποτίμηση ως μια "
+"α�ιθμητική αντικατάσταση"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "κακή αντικατάσταση: δεν υπά�χει «`» που κλείνει στο %s"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "χω�ίς ταί�ιασμα: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "αναμενόταν ό�ισμα"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: αναμενόταν ως έκφ�αση ακέ�αιος α�ιθμός"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "αναμενόταν «)»"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "σναμενόταν «)», β�έθηκε %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: αναμενόταν δυαδικός τελεστής"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: αναμενόταν μοναδιαίος τελεστής "
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "απο�σα «]»"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "συντακτικό σφάλμα: δεν αναμενόταν «;»"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "μη έγκυ�ος α�ιθμός σήματος"
+
+#: trap.c:325
+#, fuzzy, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr "eval: μέγιστο επίπεδο φωλιάσματος eval ξεπε�άστηκε (%d) "
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: κακή τιμή  στην trap_list[%d]: %p "
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps: ο διαχει�ιστής σήματος είναι ο SIG_DFL, στέλνει %d (%s) "
+"σε μένα "
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: κακό σήμα %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "σφάλμα κατά την εισαγωγή του ο�ισμο� της συνά�τησης «%s»"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "επίπεδο κελ�φους (%d) πολ� υψηλό, επαναφο�ά στο 1"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: no function context at current scope"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: η μεταβλητή δεν μπο�εί να δεχτεί τιμή  "
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr ""
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr ""
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s έχει κενό exportstr"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "ο χα�ακτή�ας %d δεν έίναι έγκυ�ος στην exportstr για %s"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "απουσία «=» στην exportstr για %s"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr "pop_var_context: head of shell_variables not a function context"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: no global_variables context"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr "pop_scope: head of shell_variables not a temporary environment scope"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: αδυναμία ανοίγματος ως ΑΡΧΕΙΟ"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: μη έγκυ�η τιμή για trace file descriptor"
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s: τιμή συμβατότητας εκτός ο�ίου "
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Copyright (C) 2016 Free Software Foundation, Inc."
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"License GPLv3+: GNU GPL έκδοση 3 ή νεώτε�η <http://gnu.org/licenses/gpl."
+"html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, έκδοση %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr "This is free software; you are free to change and redistribute it."
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "There is NO WARRANTY, to the extent permitted by law."
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: αδυναμία εκχώ�ησης %lu bytes (%lu bytes εκχω�ήθηκαν)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: αδυναμία εκχώ�ησης %lu bytes"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: αδυναμία εκχώ�ησης %lu bytes (%lu bytes εκχω�ήθηκαν)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: αδυναμία εκχώ�ησης %lu bytes"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [name[=value] ... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] name [name ...]"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function ή readline-command]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [shell-builtin [arg ...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [expr]"
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]] [-@]] [dir]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] command [arg ...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilnrtux] [-p] [name[=value] ...]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilnrtux] [-p] name[=value] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [option] name[=value] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [arg ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [arg ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f filename] [name ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [arg ...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts optstring name [arg]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a name] [command [arguments ...]] [redirection ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [job_spec]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [job_spec ...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p pathname] [-dt] [name ...]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [pattern ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d offset] [n] ή history -anrw [filename] ή history -ps arg "
+"[arg...]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [jobspec ... | pid ...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let arg [arg ...]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [name ...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [name[=value] ...] ή export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [name[=value] ...] ή readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source filename [arguments]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". όνομα α�χείου [ο�ίσματα]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [expr]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ arg... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[arg] signal_spec ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] name [name ...]"
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [mode]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-n] [id ...]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [pid ...]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for NAME [in WORDS ... ] ; do COMMANDS; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select NAME [in WORDS ... ;] do COMMANDS; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] pipeline"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while COMMANDS; do COMMANDS; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until COMMANDS; do COMMANDS; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [NAME] command [redirections]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function name { COMMANDS ; } ή name () { COMMANDS ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ COMMANDS ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "job_spec [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( expression ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ expression ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "variables - Ονόματα και σημασία ο�ισμένων μεταβλητών του κελ�φους"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | dir]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [optname ...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v var] format [ο�ίσματα]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DE] [-o option] [-A action] [-G globpat] [-"
+"W wordlist]  [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist]  "
+"[-F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+
+#: builtins.c:239
+#, fuzzy
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o option] [-DE] [name ...]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+
+#: builtins.c:244
+#, fuzzy
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-n count] [-O origin] [-s count] [-t] [-u fd] [-C callback] [-c "
+"quantum] [array]"
+
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Αφαί�εση κάθε Ο�ΟΜΑτος από τη λίστα των καθο�ισμένων ψευδων�μων.\n"
+"    \n"
+"    Επιλογές:\n"
+"      -a\tαφαί�εση όλων των ψευδων�μων.\n"
+"    \n"
+"    Επιστ�έφει επιτυχία εκτός αν το Ο�ΟΜΑ δεν είναι υπα�κτό ψευδώνυμο."
+
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Ξανα�χίζει τους β�όχους for, while, ή until.\n"
+"    \n"
+"    Ξανα�χίζει την επόμενη επανάληψη του β�όχου FOR, WHILE ή UNTIL .\n"
+"    Αν N είναι ο�ισμένο, ξανα�χίζει το N-στο β�όχο.\n"
+"    \n"
+"    Κατάσταση εξόδου:\n"
+"    Ο κωδικός εξόδου είναι 0 εκτός αν το N δεν είναι μαγαλ�τε�ο ή ίσον του 1."
+
+#: builtins.c:354
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"Εμφάνιση του ονόματος του τ�έχοντος καταλόγου ε�γασίας.\n"
+"    \n"
+"    Επιλογές:\n"
+"      -L\tεμφάνιση της τιμής της $PWD if it names the current working\n"
+"    \tdirectory\n"
+"      -P\tεμφάνιση του φυσικο� καταλόγου, χω�ίς συμβολικο�ς συνδέσμους\n"
+"    \n"
+"    Από π�οεπιλογή, η «pwd» συμπε�ιφέ�εται σαν να είχε δωθεί «-L» .\n"
+"    \n"
+"    Κατάσταση εξόδου:\n"
+"    Επιστ�έφει 0 εκτός αν δίνεται μη έγκυ�η επιλογή ή ο τ�έχων κατάλογος\n"
+"    δεν μπο�εί να διαβαστεί."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Εντολή Null.\n"
+"    \n"
+"    Κανένα αποτέλεσμα, η εντολή δεν κάνει τίποτα.\n"
+"    \n"
+"    Κατάσταση εξόδου:\n"
+"    Πάντα επιτυχία."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Επιστ�έφει επιτυχημένο αποτέλεσμα.\n"
+"    \n"
+"    Κατάσταση Εξόδου:\n"
+"    Πάντοτε επιτυχία."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Επιστ�έφει αποτυχημένο αποτέλεσμα.\n"
+"    \n"
+"    Κατάσταση Εξόδου:\n"
+"    Πάντοτε αποτυχία."
+
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+
+#: builtins.c:490
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"Καθο�ίζει τιμές και χα�ακτη�ιστκά μεταβλητής.\n"
+"    \n"
+"    Συνώνημο με «declare».  Βλέπε «help declare»."
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+
+#: builtins.c:557
+#, fuzzy
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Γ�άφει ο�ίσματα στη κανονική έξοδο.\n"
+"    \n"
+"    Εμφανίζει τα ARG, χω�ισμένα από χα�ακτή�ες απλο� διαστήματος "
+"ακολουθο�μενα από\n"
+"    νέα γ�αμμή, στη τυπική έξοδο.\n"
+"    \n"
+"    Έπιλογές:\n"
+"      -n\tδεν επισυνάπτεται νέα γ�αμμή\n"
+"      -e\tενε�γοποίηση ε�μηνείας των πα�ακάτω  backslash διαφυγής\n"
+"      -E\t�ητή απενε�γοποίηση ε�μηνείας του backslash διαφυγής\n"
+"    \n"
+"    η «echo» ε�μηνε�ει τους επόμενους backslash-escaped χα�ακτή�ες:\n"
+"      \\a\tσυναγε�μός (κουδο�νι)\n"
+"      \\b\tbackspace\n"
+"      \\c\tκαταστέλλει την πα�απέ�α έξοδο\n"
+"      \\e\tχα�ακτή�ας διαφυγής\n"
+"      \\E\tχα�ακτή�ας διαφυγής\n"
+"      \\f\tνέα σελίδα\n"
+"      \\n\tνέα γ�αμμή\n"
+"      \\r\tcarriage return\n"
+"      \\t\tο�ιζόντιο tab\n"
+"      \\v\tκατακό�υφο tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tο χα�ακτή�ας με κωδικό ASCII  NNN (οκταδικός),  ο NNN μπο�εί\n"
+"    \t\tνα είναι 0 έως 3 οκταδικά ψηφία\n"
+"      \\xHH\tο οκταδικός χα�ακτή�ας με τιμή HH (εξαδικός), ο HH\n"
+"    \t\tμπο�εί να είναι ένα ή δ�ο εξαδικά ψηφία\n"
+"    \n"
+"    Κατάσταση εξόδου:\n"
+"    Επιστ�έφει επιτυχία εκτός αν συμβεί λάθος εγγ�αφής. "
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Γ�άφει ο�ίσματα στην κανονική έξοδο.\n"
+"    \n"
+"    Εμφανίζει στην κανονική έξοδο τα ARG ακολουθο�μενα από μια νέα γ�αμμή.\n"
+"    \n"
+"    Επιλογή:\n"
+"      -n\tδεν επισυνάπτεις μια νέα γ�αμμή\n"
+"    \n"
+"    Κατάσταση εξόδου:\n"
+"    Επιστ�έφει επιτυχία εκτός αν συμβεί σφάλμα. "
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Εκτελεί ο�ίσματα σαν να είναι εντολή κελ�φους.\n"
+"    \n"
+"    Συνδιάζει ARGs σε μια μοναδική συμβολοσει�ά, χ�ησιμοποιεί το αποτέλεσμα "
+"ως είσοδο στο κέλυφος,\n"
+"    και εκτελεί τις εντολές που π�οκ�πτουν.\n"
+"    \n"
+"    Κατάσταση εξόδου:\n"
+"    Επιστ�έφει τον ίδιο κωδικό εξόδου με την εντολή ή επιτυχία αν ή εντολή "
+"είναι κενή. "
+
+#: builtins.c:652
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Τε�ματισμός του κελ�φους.\n"
+"    \n"
+"    Τε�ματισμός κελ�φους με κωδικό N.  Αν το N πα�αληφθεί, η κατάσταση "
+"εξόδου\n"
+"    είναι αυτή της τελευταίας εκτελεσμένης εντολής."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Τε�ματισμός ενός κελ�φους σ�νδεσης.\n"
+"    \n"
+"    Τε�ματίζει ένα κέλυφος σ�νδεσης με κατάσταση εξόδου N. Επιστ�έφει σφάλμα "
+"αν δεν εκτελείται\n"
+"    σ' ένα κέλυφος σ�νδεσης. "
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Μετακίνηση της ε�γασίας στο π�οσκήνιο.\n"
+"    \n"
+"    Βάζει την ε�γασία που ο�ίζεται από JOB_SPEC στο π�οσκήνιο, κάνοντάς την\n"
+"    την τ�έχουσα ε�γασία.  Αν δεν δίνεται η JOB_SPEC, τότε χ�ησιμοποιείται η "
+"αντίληψη\n"
+"    που έχει το κέλυφος ως τ�έχουσα ε�γασία.\n"
+"    \n"
+"    Κατάσταση εξόδου:\n"
+"    Η κατάσταση της ε�γασίας που μπήκε στο π�οσκήνιο, ή κωδικός αποτυχίας "
+"στην πε�ίπτωση σφάλματος."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Μετακινεί ε�γασίες στο πα�ασκήνιο.\n"
+"    \n"
+"    Τοποθετεί τις ε�γασίες που ο�ίζονται από κάθε JOB_SPEC στο πα�ασκήνιο,\n"
+"    όπως αν ά�χισαν με «&».  Αν δεν δίνεται η JOB_SPEC, τότε χ�ησιμοποιείται "
+"ή αντίληψη που έχει το κέλυφος\n"
+"    ως τ�έχουσα ε�γασία.\n"
+"    \n"
+"    Κατάσταση εξόδου:\n"
+"    Επιστ�έφεται επιτυχία εκτός αν δεν έχει ενε�γοποιηθεί job control ή έχει "
+"συμβεί σφάλμα."
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"Αφαί�εση ε�γασιών από το τ�έχον κέλυφος.\n"
+"    \n"
+"    Αφαι�εί κάθε ό�ισμα JOBSPEC από τον πίνακα ενε�γών ε�γασιών.  Στην "
+"απουσία\n"
+"    JOBSPEC, τότε το κέλυφος χ�ησιμοποιεί την ιδέα που έχει πε�ί της "
+"τ�έχουσας ε�γασίας.\n"
+"    \n"
+"    Επιλογές:\n"
+"      -a\tαφαι�εί όλες τις ε�γασίες αν δεν δοθεί JOBSPEC\n"
+"      -h\tσημαδε�ει κάθε JOBSPEC έτσι ώστε το SIGHUP δεν στέλνεται στην "
+"ε�γασία\n"
+"    \t\tαν το κέλυφος δεχτεί ένα σήμα SIGHUP\n"
+"      -r\tαφαι�εί μόνο εκτελο�μενες ε�γασίες\n"
+"    \n"
+"    Κατάσταση εξόδου:\n"
+"    Επιστ�έφει επιτυχία εκτός αν έχει δοθεί μη έγκυ�η επιλογή ή JOBSPEC."
+
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"Ολίσθηση θεσιακών πα�αμέτ�ων.\n"
+"    \n"
+"    Μετονομασία των θεσιακών πα�αμέτ�ων $N+1,$N+2 ... to $1,$2 ...  Αν N\n"
+"    δεν δίνεται, υποτίθεται πως είναι 1.\n"
+"    \n"
+"    Κατάσταση εξόδου:\n"
+"    Επιστ�έφει επιτυχία εκτός αν N είναι α�νητικός ή μαγαλ�τε�ο; από $#. "
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"Αποτίμηση δυνητικής έκφ�ασης.\n"
+"    \n"
+"    Τε�ματίζεται με κωδικό 0 (αληθής) ή 1 (ψευδής) ανάλογα\n"
+"    με την αποτίμηση της EXPR.  Η έκφ�αση μπο�εί να είναι μοναδιαία ή "
+"δυαδική.  Μοναδιαίες\n"
+"    εκφ�άσεις χ�ησιμοποιο�νται συχνά  για την εξέταση της κατάστασης "
+"α�χείου.  Υπά�χουν\n"
+"    τελεστές αλφα�ιθμητικών όπως και συγκ�ίσεως α�ιθμών.\n"
+"    \n"
+"    Η συμπε�ιφο�ά των τεστ εξα�τάται από τον α�ιθμό των ο�ισμάτων.  "
+"Αναφε�θείτε\n"
+"    στη σελίδα εγχει�ιδίου του bash για τις ολοκλη�ωμένες π�οδιαγ�αφές.\n"
+"    \n"
+"    Τελεστές α�χείων:\n"
+"    \n"
+"      -a ΑΡΧΕΙΟ        Αληθής αν το α�χείο υπά�χει.\n"
+"      -b ΑΡΧΕΙΟ        Αληθής αν το α�χείο είναι ειδικό α�χείο μπλοκ.\n"
+"      -c ΑΡΧΕΙΟ        Αληθής αν το α�χείο είναι ειδικό α�χείο χα�ακτή�ων.\n"
+"      -d ΑΡΧΕΙΟ        Αληθής αν το α�χείο είναι κατάλογος.\n"
+"      -e ΑΡΧΕΙΟ        Αληθής αν το α�χείο υπά�χει.\n"
+"      -f  ΑΡΧΕΙΟ        Αληθής αν το α�χείο υπά�χει και είναι κανονικό "
+"α�χείο.\n"
+"      -g  ΑΡΧΕΙΟ       Αληθής αν το α�χείο είναι «set-group-id».\n"
+"      -h ΑΡΧΕΙΟ        Αληθής αν το α�χείο είναι συμβολικός σ�νδεσμος.\n"
+"      -L ΑΡΧΕΙΟ        Αληθής αν το α�χείο είναι συμβολικός σ�νδεσμος.\n"
+"      -k ΑΡΧΕΙΟ        Αληθής αν το α�χείο έχει ο�ισμένο το bit «sticky».\n"
+"      -p ΑΡΧΕΙΟ        Αληθής αν το α�χείο μια named pipe.\n"
+"      -r ΑΡΧΕΙΟ        Αληθής αν το α�χείο είναι αναγνώσιμο από εσάς.\n"
+"      -s ΑΡΧΕΙΟ        Αληθής αν το α�χείο υπά�χει και δεν είναι κενό.\n"
+"      -S ΑΡΧΕΙΟ        Αληθής αν το α�χείο είναι ένα socket.\n"
+"      -t FD                Αληθής αν ο FD είναι ανοιγμένος σ' ενα "
+"τε�ματικό.\n"
+"      -u ΑΡΧΕΙΟ        Αληθής αν το α�χείο είναι «set-user-id».\n"
+"      -w ΑΡΧΕΙΟ        Αληθής αν το α�χείο εγγ�άψιμο από εσάς.\n"
+"      -x ΑΡΧΕΙΟ        Αληθής αν το α�χείο είναι εκτελέσιμο από εσάς.\n"
+"      -O ΑΡΧΕΙΟ        Αληθής αν το α�χείο is effectively owned by you.\n"
+"      -G ΑΡΧΕΙΟ        Αληθής αν το α�χείο is effectively owned by your "
+"group.\n"
+"      -N ΑΡΧΕΙΟ        Αληθής αν το α�χείο μεταβλήθηκε από την τελευταία "
+"φο�ά που διαβάστηκε.\n"
+"    \n"
+"      ΑΡΧΕΙΟ1 -nt ΑΡΧΕΙΟ2  Αληθής αν το α�χείο1 είναι νεότε�ο από το α�χείο2 "
+"(σ�μφωνα\n"
+"                       με την ημε�ομηνία τ�οποποίηση).\n"
+"    \n"
+"      ΑΡΧΕΙΟ1 -ot ΑΡΧΕΙΟ2  Αληθές αν α�χείο1 είναι παλαιότε�ο από το "
+"α�χείο2.\n"
+"    \n"
+"      ΑΡΧΕΙΟ1 -ef ΑΡΧΕΙΟ2  Αληθές αν το α�χείο1 είναι hard link στο "
+"α�χείο2.\n"
+"    \n"
+"    Τελεστές συμβολοσει�άς:\n"
+"    \n"
+"      -z STRING      Αληθές αν η συμβολοσει�ά είναι κενή.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      Αληθές αν η συμβολοσει�ά δεν είναι κενή.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     Αληθές αν οι συμβολοσει�ές είναι ίσες.\n"
+"      STRING1 != STRING2\n"
+"                     Αληθές αν οι συμβολοσει�ές δεν είναι ίσες.\n"
+"      STRING1 < STRING2\n"
+"                     Αληθές αν η STRING1 π�οηγείται λεξικογ�αφικά της "
+"STRING2.\n"
+"      STRING1 > STRING2\n"
+"                     Αληθές αν η STRING1 έπεται λεξικογ�αφικά της STRING2.\n"
+"    \n"
+"    Άλλοι τελεστές:\n"
+"    \n"
+"      -o OPTION      Αληθές αν η επιλογή του κελ�φους OPTION έχει "
+"ενε�γοποιηθεί.\n"
+"      -v VAR         Αληθές αν η μεταβλητή VAR έχει ο�ιστεί.\n"
+"      -R VAR         Αληθές αν η μεταβλητή VAR έχει ο�ιστεί και είναι όνομα\n"
+"                     αναφο�άς.\n"
+"      ! EXPR         Αληθές αν η expr είναι ψευδής.\n"
+"      EXPR1 -a EXPR2 Αληθές αν αμφότε�ες οι expr1 ΚΑΙ expr2 είναι αληθείς.\n"
+"      EXPR1 -o EXPR2 Αληθές αν είτε η expr1 Ή η expr2 είναι αληθής.\n"
+"    \n"
+"      arg1 OP arg2   Α�ηθμιτικά τεστ.  OP είναι ένα από τα -eq, -ne,\n"
+"                     -lt, -le, -gt, ή -ge.\n"
+"    \n"
+"    Α�ιθμητικοί δυαδικοί τελεστές επιστ�έφουν αληθές αν ARG1 είναι ίσο, μη-"
+"ίσο,\n"
+"    μικ�ότε�ο-από, μικ�ότε�ο-από-ή-ίσο, μεγαλ�τε�ο-από, ή μεγαλ�τε�ο-από-ή-"
+"ίσο\n"
+"    από το ARG2.\n"
+"    \n"
+"    Κατάσταση εξόδου:\n"
+"    Επιστ�έφει επιτυχία αν EXPR αποτιμάται σε αληθές, αποτυχία αν EXPR "
+"αποτιμάται σε\n"
+"    ψευδές ή αν δίδεται ένα μη έγκυ�ο ό�ισμα."
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Αποτιμά δυνητική έκφ�αση.\n"
+"    \n"
+"    Συνώνυμο με το «test» builtin, αλλά το τελευταίο ό�ισμα π�έπει\n"
+"να είναι ένα «]», ώστε να κλείνει το αντίστοιχο «[»."
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Εμφανίζει χ�όνους διε�γασιών.\n"
+"    \n"
+"    Εμφανίζει το χ�όνο του χ�ήστη και συστήματος για το κέλυφος και όλες "
+"τις\n"
+"    θυγατ�ικές διε�γασίες.\n"
+"    \n"
+"    Κατάσταση εξόδου:\n"
+"    Πάντα επιτυχία."
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+
+#: builtins.c:1431
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+
+#: builtins.c:1502
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Εκτέλεση εντολών για μέλος μιας λίστας.\n"
+"    \n"
+"    Ο β�όχος «for» εκτελεί μια αλληλουχία εντολών για κάθε μέλος\n"
+"    μιας λίστας.  Αν «in ΛΕΞΕΙΣ ...;» δεν δίνεται, τότε υποτίθεται η «in \"$@"
+"\"».\n"
+"    Για κάθε στοιχείο στις ΛΕΞΕΙΣ, Ο�ΟΜΑ ο�ίζεται σ' αυτό το στοιχείο, και\n"
+"    οι Ε�ΤΟΛΕΣ εκτελο�νται.\n"
+"    \n"
+"    Κατάσταση εξόδου:\n"
+"    Επιστ�έφει την κατάσταση της τελευταίας εκτελεσμένης εντολής."
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Α�ιθμητική β�όχου for.\n"
+"    \n"
+"    Ισοδ�ναμο με\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, και EXP3 είναι α�ιθμητικές εκφ�άσεις. Αν μια έκφ�αση\n"
+"    πα�αληφθεί, συμπε�ιφέ�εται σαν να είχε αποτιμηθεί ίση με 1.\n"
+"    \n"
+"    Κατάσταση εξόδου:\n"
+"    Επιστ�έφει τη κατάσταση της τελευταίας εκτελεσμένης εντολής."
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Αποτίμηση α�ιθμητικής εκφ�άσεως.\n"
+"    \n"
+"    Η ΕΚΦΡΑΣΗ αποτιμάται σ�μφωνα με τους α�ιθμητικο�ς κανόνες.\n"
+"    Ισοδ�ναμο με το \"let ΕΚΦΡΑΣΗ\".\n"
+"    \n"
+"    Κωδικός εξόδου:\n"
+"    Επιστ�έφει 1 αν η ΕΚΦΡΑΣΗ αποτιμάται σε 0, αλλιώς επιστ�έφει 0."
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+
+#: builtins.c:1971
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Διαβάζει γ�αμμές από α�χείο σε μεταβλητή τ�που πίνακα.\n"
+"    \n"
+"    Συνώνημο του «mapfile»."
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "Επιστ�έφει το context της κλήσης της τ�έχουσας υπο�ουτίνας.\n"
+#~ "    \n"
+#~ "    Χω�ίς EXPR, επιστ�έφει "
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process: διε�γασία %5ld (%s) στη the_pipeline "
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "Άγνωστο σήμα #"
diff --git a/po/en@boldquot.gmo b/po/en@boldquot.gmo
new file mode 100644
index 0000000..15cd5f1
--- /dev/null
+++ b/po/en@boldquot.gmo
diff --git a/po/en@boldquot.header b/po/en@boldquot.header
new file mode 100644
index 0000000..fedb6a0
--- /dev/null
+++ b/po/en@boldquot.header
@@ -0,0 +1,25 @@
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
+# This catalog furthermore displays the text between the quotation marks in
+# bold face, assuming the VT100/XTerm escape sequences.
+#
diff --git a/po/en@boldquot.po b/po/en@boldquot.po
new file mode 100644
index 0000000..edfa3c7
--- /dev/null
+++ b/po/en@boldquot.po
@@ -0,0 +1,5898 @@
+# English translations for GNU bash package.
+# Copyright (C) 2020 Free Software Foundation, Inc.
+# This file is distributed under the same license as the GNU bash package.
+# Automatically generated, 2020.
+#
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
+# This catalog furthermore displays the text between the quotation marks in
+# bold face, assuming the VT100/XTerm escape sequences.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: GNU bash 5.1-rc3\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2020-11-28 12:51-0500\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: none\n"
+"Language: en\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "bad array subscript"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr "%s: removing nameref attribute"
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: cannot convert indexed to associative array"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: invalid associative array key"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: cannot assign to non-numeric index"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr "%s: %s: must use subscript when assigning associative array"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: cannot create: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr "bash_execute_unix_command: cannot find keymap for command"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: first non-whitespace character is not ‘\"’"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "no closing ‘%c’ in %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: missing colon separator"
+
+#: bashline.c:4555
+#, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "‘%s’: cannot unbind in command keymap"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr "brace expansion: cannot allocate memory for %s"
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr "brace expansion: failed to allocate memory for %u elements"
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr "brace expansion: failed to allocate memory for ‘%s’"
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "‘%s’: invalid alias name"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "line editing not enabled"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "‘%s’: invalid keymap name"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: cannot read: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "‘%s’: unknown function name"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s is not bound to any keys.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s can be invoked via "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "‘%s’: cannot unbind"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "loop count"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "only meaningful in a ‘for’, ‘while’, or ‘until’ loop"
+
+#: builtins/caller.def:136
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns “$line $filename�.  With EXPR, returns\n"
+"    “$line $subroutine $filename�; this extra information can be used "
+"to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "HOME not set"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "too many arguments"
+
+#: builtins/cd.def:342
+msgid "null directory"
+msgstr "null directory"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "OLDPWD not set"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "line %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "warning: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: usage: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: option requires an argument"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: numeric argument required"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: not found"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: invalid option"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: invalid option name"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "‘%s’: not a valid identifier"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "invalid octal number"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "invalid hex number"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "invalid number"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: invalid signal specification"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "‘%s’: not a pid or valid job spec"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: readonly variable"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s out of range"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "argument"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s out of range"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: no such job"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: no job control"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "no job control"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: restricted"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "restricted"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: not a shell builtin"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "write error: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "error setting terminal attributes: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "error getting terminal attributes: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: error retrieving current directory: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: ambiguous job spec"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr "help not available in this version"
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: cannot unset: readonly %s"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: cannot unset"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: invalid action name"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: no completion specification"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "warning: -F option may not work as you expect"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "warning: -C option may not work as you expect"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "not currently executing completion function"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "can only be used in a function"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr "%s: reference variable cannot be an array"
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr "%s: nameref variable self references not allowed"
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s: circular name reference"
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "‘%s’: invalid variable name for name reference"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "cannot use ‘-f’ to make functions"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: readonly function"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr "%s: quoted compound array assignment deprecated"
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: cannot destroy array variables in this way"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: cannot convert associative to indexed array"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "dynamic loading not available"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "cannot open shared object %s: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "cannot find %s in shared object %s: %s"
+
+#: builtins/enable.def:388
+#, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: dynamic builtin already loaded"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr "load function for %s returns failure (%d): not loaded"
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: not dynamically loaded"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: cannot delete: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: is a directory"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: not a regular file"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: file is too large"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: cannot execute binary file"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: cannot execute: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "logout\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "not login shell: use ‘exit’"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "There are stopped jobs.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "There are running jobs.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "no command found"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "history specification"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: cannot open temp file: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "current"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "job %d started without job control"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: illegal option -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: option requires an argument -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "hashing disabled"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: hash table empty\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "hits\tcommand\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Shell commands matching keyword `"
+msgstr[1] "Shell commands matching keywords `"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+"'\n"
+"\n"
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"no help topics match ‘%s’.  Try ‘help help’ or ‘man -k %s’ "
+"or ‘info %s’."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: cannot open: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"These shell commands are defined internally.  Type ‘help’ to see this "
+"list.\n"
+"Type ‘help name’ to find out more about the function ‘name’.\n"
+"Use ‘info bash’ to find out more about the shell in general.\n"
+"Use ‘man -k’ or ‘info’ to find out more about commands not in "
+"this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "cannot use more than one of -anrw"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "history position"
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: invalid timestamp"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: history expansion failed"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: inlib failed"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "no other options allowed with ‘-x’"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: arguments must be process or job IDs"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Unknown error"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "expression expected"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: not an indexed array"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: invalid file descriptor specification"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: invalid file descriptor: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: invalid line count"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: invalid array origin"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: invalid callback quantum"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "empty array variable name"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "array variable support required"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "‘%s’: missing format character"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "‘%c’: invalid time format specification"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "‘%c’: invalid format character"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "warning: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "format parsing problem: %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "missing hex digit for \\x"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "missing unicode digit for \\%c"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "no other directory"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s: invalid argument"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<no current directory>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "directory stack empty"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "directory stack index"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the ‘pushd’ command; you can "
+"get\n"
+"    back up through the list with the ‘popd’ command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by ‘dirs’, starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by ‘dirs’, starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The ‘dirs’ builtin displays the directory stack."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by ‘dirs’, starting with zero.  For example: ‘popd "
+"+0’\n"
+"    \tremoves the first directory, ‘popd +1’ the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by ‘dirs’, starting with zero.  For example: ‘popd "
+"-0’\n"
+"    \tremoves the last directory, ‘popd -1’ the next to last.\n"
+"    \n"
+"    The ‘dirs’ builtin displays the directory stack."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: invalid timeout specification"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "read error: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr "can only ‘return’ from a function or sourced script"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "cannot simultaneously unset a function and a variable"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: not an array variable"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: not a function"
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr "%s: cannot export"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "shift count"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "cannot set and unset shell options simultaneously"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: invalid shell option name"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "filename argument required"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: file not found"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "cannot suspend"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "cannot suspend a login shell"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s is aliased to ‘%s’\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s is a shell keyword\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s is a function\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s is a special shell builtin\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s is a shell builtin\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s is %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s is hashed (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: invalid limit argument"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "‘%c’: bad command"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: cannot get limit: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "limit"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: cannot modify limit: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "octal number"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "‘%c’: invalid symbolic mode operator"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "‘%c’: invalid symbolic mode character"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " line "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "last command: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Aborting..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr "INFORM: "
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "unknown command error"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "bad command type"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "bad connector"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "bad jump"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: unbound variable"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\atimed out waiting for input: auto-logout\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "cannot redirect standard input from /dev/null: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "TIMEFORMAT: ‘%c’: invalid format character"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr "execute_coproc: coproc [%d:%s] still exists"
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "pipe error"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr "eval: maximum eval nesting level exceeded (%d)"
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr "%s: maximum source nesting level exceeded (%d)"
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr "%s: maximum function nesting level exceeded (%d)"
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: restricted: cannot specify ‘/’ in command names"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: command not found"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: bad interpreter"
+
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: cannot execute binary file: %s"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "‘%s’: is a special builtin"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "cannot duplicate fd %d to fd %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "expression recursion level exceeded"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "recursion stack underflow"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "syntax error in expression"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "attempted assignment to non-variable"
+
+#: expr.c:530
+msgid "syntax error in variable assignment"
+msgstr "syntax error in variable assignment"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "division by 0"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "bug: bad expassign token"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "‘:’ expected for conditional expression"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "exponent less than 0"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "identifier expected after pre-increment or pre-decrement"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "missing ‘)’"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "syntax error: operand expected"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "syntax error: invalid arithmetic operator"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (error token is “%s�)"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "invalid arithmetic base"
+
+#: expr.c:1582
+msgid "invalid integer constant"
+msgstr "invalid integer constant"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "value too great for base"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: expression error\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: cannot access parent directories"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "cannot reset nodelay mode for fd %d"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr "cannot allocate new file descriptor for bash input from fd %d"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input: buffer already exists for new fd %d"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: pgrp pipe"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "forked pid %d appears in running job %d"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "deleting stopped job %d with process group %ld"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process: pid %5ld (%s) marked as still alive"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: no such pid"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Signal %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Done"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Stopped"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Stopped(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "Running"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Done(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Exit %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Unknown status"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(core dumped) "
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (wd: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "child setpgid (%ld to %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: pid %ld is not a child of this shell"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: No record of process %ld"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: job %d is stopped"
+
+#: jobs.c:3564
+#, c-format
+msgid "%s: no current jobs"
+msgstr "%s: no current jobs"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: job has terminated"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: job %d already in background"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr "waitchld: turning on WNOHANG to avoid indefinite block"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: line %d: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (core dumped)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(wd now: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: getpgrp failed"
+
+#: jobs.c:4447
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: no job control in background"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: line discipline"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "cannot set terminal process group (%d)"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "no job control in this shell"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: failed assertion: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "unknown"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: block on free list clobbered"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: called with already freed block argument"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: called with unallocated block argument"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: underflow detected; mh_nbytes out of range"
+
+#: lib/malloc/malloc.c:1001
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: underflow detected; magic8 corrupted"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: start and end chunk sizes differ"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: called with unallocated block argument"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc: underflow detected; mh_nbytes out of range"
+
+#: lib/malloc/malloc.c:1141
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc: underflow detected; magic8 corrupted"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: start and end chunk sizes differ"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: alloc table is full with FIND_ALLOC?\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: %p already in table as allocated?\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: %p already in table as free?\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "invalid base"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: host unknown"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: invalid service"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: bad network path specification"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "network operations not supported"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: cannot change locale (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: cannot change locale (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: cannot change locale (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: cannot change locale (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "You have mail in $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "You have new mail in $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "The mail in %s has been read\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "syntax error: arithmetic expression required"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "syntax error: ‘;’ unexpected"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "syntax error: ‘((%s))’"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: bad instruction type %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr "here-document at line %d delimited by end-of-file (wanted ‘%s’)"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr "make_redirection: redirection instruction ‘%d’ out of range"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr "maximum here-document count exceeded"
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "unexpected EOF while looking for matching ‘%c’"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "unexpected EOF while looking for ‘]]’"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "syntax error in conditional expression: unexpected token ‘%s’"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "syntax error in conditional expression"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "unexpected token ‘%s’, expected ‘)’"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "expected ‘)’"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "unexpected argument ‘%s’ to conditional unary operator"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "unexpected argument to conditional unary operator"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "unexpected token ‘%s’, conditional binary operator expected"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "conditional binary operator expected"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "unexpected argument ‘%s’ to conditional binary operator"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "unexpected argument to conditional binary operator"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "unexpected token ‘%c’ in conditional command"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "unexpected token ‘%s’ in conditional command"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "unexpected token %d in conditional command"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "syntax error near unexpected token ‘%s’"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "syntax error near ‘%s’"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "syntax error: unexpected end of file"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "syntax error"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Use “%s� to leave the shell.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "unexpected EOF while looking for matching ‘)’"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "completion: function ‘%s’ not found"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr "programmable_completion: %s: possible retry loop"
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: NULL COMPSPEC"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: bad connector ‘%d’"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: invalid file descriptor"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: NULL file pointer"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != fileno xtrace fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: ‘%c’: invalid format character"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "file descriptor out of range"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: ambiguous redirect"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: cannot overwrite existing file"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: restricted: cannot redirect output"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "cannot create temp file for here-document: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: cannot assign fd to variable"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "/dev/(tcp|udp)/host/port not supported without networking"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "redirection error: cannot duplicate fd"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "could not find /tmp, please create!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp must be a valid directory name"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr "pretty-printing mode ignored in interactive shells"
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: invalid option"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "cannot set uid to %d: effective uid %d"
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "cannot set gid to %d: effective gid %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr "cannot start debugger; debugging mode disabled"
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr "%s: Is a directory"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "I have no name!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, version %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "GNU long options:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Shell options:\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s or -o option\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+"Type ‘%s -c “help set�’ for more information about shell "
+"options.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr ""
+"Type ‘%s -c help’ for more information about shell builtin commands.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "Use the ‘bashbug’ command to report bugs.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr "bash home page: <http://www.gnu.org/software/bash>\n"
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: invalid operation"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Bogus signal"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Hangup"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Interrupt"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Quit"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Illegal instruction"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "BPT trace/trap"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "ABORT instruction"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "EMT instruction"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Floating point exception"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Killed"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Bus error"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Segmentation fault"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Bad system call"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Broken pipe"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Alarm clock"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Terminated"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Urgent IO condition"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Stopped (signal)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Continue"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Child death or stop"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Stopped (tty input)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Stopped (tty output)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "I/O ready"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "CPU limit"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "File limit"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Alarm (virtual)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Alarm (profile)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Window changed"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Record lock"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "User signal 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "User signal 2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "HFT input data pending"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "power failure imminent"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "system crash imminent"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "migrate process to another CPU"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "programming error"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "HFT monitor mode granted"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "HFT monitor mode retracted"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "HFT sound sequence has completed"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "Information request"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "Unknown Signal #%d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "bad substitution: no closing ‘%s’ in %s"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: cannot assign list to array member"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "cannot make pipe for process substitution"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "cannot make child for process substitution"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "cannot open named pipe %s for reading"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "cannot open named pipe %s for writing"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "cannot duplicate named pipe %s as fd %d"
+
+#: subst.c:6213
+msgid "command substitution: ignored null byte in input"
+msgstr "command substitution: ignored null byte in input"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "cannot make pipe for command substitution"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "cannot make child for command substitution"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute: cannot duplicate pipe as fd 1"
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: invalid variable name for name reference"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: invalid indirect expansion"
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr "%s: invalid variable name"
+
+#: subst.c:7256
+#, c-format
+msgid "%s: parameter not set"
+msgstr "%s: parameter not set"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: parameter null or not set"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: substring expression < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: bad substitution"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: cannot assign in this way"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "bad substitution: no closing “`� in %s"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "no match: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "argument expected"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: integer expression expected"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "‘)’ expected"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "‘)’ expected, found %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: binary operator expected"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: unary operator expected"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "missing ‘]’"
+
+#: test.c:899
+#, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "syntax error: ‘%s’ unexpected"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "invalid signal number"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr "trap handler: maximum trap handler level exceeded (%d)"
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: bad value in trap_list[%d]: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: bad signal %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "error importing function definition for ‘%s’"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "shell level (%d) too high, resetting to 1"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: no function context at current scope"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: variable may not be assigned value"
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr "%s: assigning integer to name reference"
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: no function context at current scope"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s has null exportstr"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "invalid character %d in exportstr for %s"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "no ‘=’ in exportstr for %s"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr "pop_var_context: head of shell_variables not a function context"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: no global_variables context"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr "pop_scope: head of shell_variables not a temporary environment scope"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: cannot open as FILE"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: invalid value for trace file descriptor"
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s: compatibility value out of range"
+
+#: version.c:46 version2.c:46
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Copyright (C) 2020 Free Software Foundation, Inc."
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, version %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr "This is free software; you are free to change and redistribute it."
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "There is NO WARRANTY, to the extent permitted by law."
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: cannot allocate %lu bytes"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: cannot allocate %lu bytes"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [name[=value] ... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] name [name ...]"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [shell-builtin [arg ...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [expr]"
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]] [-@]] [dir]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] command [arg ...]"
+
+#: builtins.c:78
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+
+#: builtins.c:80
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [option] name[=value] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [arg ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [arg ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f filename] [name ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [arg ...]"
+
+#: builtins.c:96
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts optstring name [arg ...]"
+
+#: builtins.c:98
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [job_spec]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [job_spec ...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p pathname] [-dt] [name ...]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [pattern ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [jobspec ... | pid ...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let arg [arg ...]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [name ...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [name[=value] ...] or export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [name[=value] ...] or readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source filename [arguments]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". filename [arguments]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [expr]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ arg... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[arg] signal_spec ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] name [name ...]"
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [mode]"
+
+#: builtins.c:177
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-fn] [-p var] [id ...]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [pid ...]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for NAME [in WORDS ... ] ; do COMMANDS; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select NAME [in WORDS ... ;] do COMMANDS; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] pipeline"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while COMMANDS; do COMMANDS; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until COMMANDS; do COMMANDS; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [NAME] command [redirections]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function name { COMMANDS ; } or name () { COMMANDS ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ COMMANDS ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "job_spec [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( expression ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ expression ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "variables - Names and meanings of some shell variables"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | dir]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [optname ...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v var] format [arguments]"
+
+#: builtins.c:231
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+
+#: builtins.c:235
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+
+#: builtins.c:239
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o option] [-DEI] [name ...]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+
+#: builtins.c:244
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, ‘alias’ prints the list of aliases in the "
+"reusable\n"
+"    form ‘alias NAME=VALUE’ on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '“\\C-x\\C-r�: re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+
+#: builtins.c:354
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns “$line $filename�.  With EXPR, returns\n"
+"    “$line $subroutine $filename�; this extra information can be used "
+"to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option ‘cdable_vars’ "
+"is set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of ‘..’\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of ‘..’\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if ‘-L’ were "
+"specified.\n"
+"    ‘..’ is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, ‘pwd’ behaves as if ‘-L’ were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the ‘type’ "
+"builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+
+#: builtins.c:490
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the ‘integer’ attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the ‘trace’ attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using ‘+’ instead of ‘-’ turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the ‘let’ command) performed when the variable is assigned a "
+"value.\n"
+"    \n"
+"    When used in a function, ‘declare’ makes NAMEs local, as with the "
+"‘local’\n"
+"    command.  The ‘-g’ option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for ‘declare’.  See ‘help declare’."
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by ‘declare’.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+
+#: builtins.c:557
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    ‘echo’ interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix ‘special’ builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the ‘test’ found in $PATH instead of the shell builtin\n"
+"    version, type ‘enable -n test’.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+
+#: builtins.c:652
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ‘:’ into NAME "
+"and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places ‘?’ "
+"into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a ‘?"
+"[0m’\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option ‘execfail’ is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the ‘fc -s [pat=rep ...] [command]’ format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing ‘r "
+"cc’\n"
+"    runs the last command beginning with ‘cc’ and typing ‘r’ re-"
+"executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with ‘&’.  If JOB_SPEC is not present, the "
+"shell's notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a ‘*’.  An argument of N lists only the last N "
+"entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow ‘-l’ they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see ‘readonly’.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of ‘--’ disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of ‘--’ disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its ‘sticky’ bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the “test� builtin, but the last argument "
+"must\n"
+"    be a literal ‘]’, to match the opening ‘[’."
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or ‘-’, each specified signal is reset to its "
+"original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with “kill -signal $$�.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe ‘-p’ option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if ‘type -t NAME’ would not return ‘file’\n"
+"      -t\toutput a single word which is one of ‘alias’, "
+"‘keyword’,\n"
+"    \t\t‘function’, ‘builtin’, ‘file’ or ‘’, if NAME "
+"is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+
+#: builtins.c:1431
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the ‘soft’ resource limit\n"
+"      -H\tuse the ‘hard’ resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (‘nice’)\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values ‘soft’, ‘hard’, and ‘unlimited’ "
+"stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+
+#: builtins.c:1502
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The ‘for’ loop executes a sequence of commands for each member in "
+"a\n"
+"    list of items.  If ‘in WORDS ...;’ is not present, then ‘in “"
+"$@�’ is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If ‘in WORDS’ is not present, ‘in “"
+"$@�’\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    ‘|’ is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The ‘if COMMANDS’ list is executed.  If its exit status is zero, "
+"then the\n"
+"    ‘then COMMANDS’ list is executed.  Otherwise, each ‘elif "
+"COMMANDS’ list is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    ‘then COMMANDS’ list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the ‘else COMMANDS’ list is executed, if present.  The exit status "
+"of the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    ‘while’ COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    ‘until’ COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is “COPROC�.\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the ‘fg’ command.  Resume "
+"a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a ‘&’ places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to ‘bg’.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+
+#: builtins.c:1726
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to ‘let “EXPRESSION�’.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the ‘test’ builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the ‘==’ and ‘!=’ operators are used, the string to the "
+"right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the ‘=~’ operator is used, the string to the right of the "
+"operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to ‘cd’.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t‘time’ reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of ‘exact’ means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of ‘substring’ means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually ‘!’.  The second is\n"
+"    \t\tthe ‘quick substitution’ character, usually ‘^’.  The\n"
+"    \t\tthird is the ‘history comment’ character, usually ‘#’.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by ‘dirs’, starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by ‘dirs’, starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The ‘dirs’ builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by ‘dirs’, starting with zero.  For example: ‘popd "
+"+0’\n"
+"    \t\tremoves the first directory, ‘popd +1’ the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by ‘dirs’, starting with zero.  For example: ‘popd "
+"-0’\n"
+"    \t\tremoves the last directory, ‘popd -1’ the next to last.\n"
+"    \n"
+"    The ‘dirs’ builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the ‘pushd’ command; you can "
+"get\n"
+"    back up through the list with the ‘popd’ command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with ‘set -o’\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+
+#: builtins.c:1971
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to “empty� commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the “default� command completion\n"
+"    \t-E\t\tChange options for the “empty� command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using ‘+o’ instead of ‘-o’ turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the ‘complete’ builtin.  If no "
+"NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for ‘mapfile’."
diff --git a/po/en@quot.gmo b/po/en@quot.gmo
new file mode 100644
index 0000000..749c3a7
--- /dev/null
+++ b/po/en@quot.gmo
diff --git a/po/en@quot.header b/po/en@quot.header
new file mode 100644
index 0000000..a9647fc
--- /dev/null
+++ b/po/en@quot.header
@@ -0,0 +1,22 @@
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
diff --git a/po/en@quot.po b/po/en@quot.po
new file mode 100644
index 0000000..5d978b2
--- /dev/null
+++ b/po/en@quot.po
@@ -0,0 +1,5859 @@
+# English translations for GNU bash package.
+# Copyright (C) 2020 Free Software Foundation, Inc.
+# This file is distributed under the same license as the GNU bash package.
+# Automatically generated, 2020.
+#
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: GNU bash 5.1-rc3\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2020-11-28 12:51-0500\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: none\n"
+"Language: en\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "bad array subscript"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr "%s: removing nameref attribute"
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: cannot convert indexed to associative array"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: invalid associative array key"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: cannot assign to non-numeric index"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr "%s: %s: must use subscript when assigning associative array"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: cannot create: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr "bash_execute_unix_command: cannot find keymap for command"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: first non-whitespace character is not ‘\"’"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "no closing ‘%c’ in %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: missing colon separator"
+
+#: bashline.c:4555
+#, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "‘%s’: cannot unbind in command keymap"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr "brace expansion: cannot allocate memory for %s"
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr "brace expansion: failed to allocate memory for %u elements"
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr "brace expansion: failed to allocate memory for ‘%s’"
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "‘%s’: invalid alias name"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "line editing not enabled"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "‘%s’: invalid keymap name"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: cannot read: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "‘%s’: unknown function name"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s is not bound to any keys.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s can be invoked via "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "‘%s’: cannot unbind"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "loop count"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "only meaningful in a ‘for’, ‘while’, or ‘until’ loop"
+
+#: builtins/caller.def:136
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns “$line $filename�.  With EXPR, returns\n"
+"    “$line $subroutine $filename�; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "HOME not set"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "too many arguments"
+
+#: builtins/cd.def:342
+msgid "null directory"
+msgstr "null directory"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "OLDPWD not set"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "line %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "warning: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: usage: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: option requires an argument"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: numeric argument required"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: not found"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: invalid option"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: invalid option name"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "‘%s’: not a valid identifier"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "invalid octal number"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "invalid hex number"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "invalid number"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: invalid signal specification"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "‘%s’: not a pid or valid job spec"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: readonly variable"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s out of range"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "argument"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s out of range"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: no such job"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: no job control"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "no job control"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: restricted"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "restricted"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: not a shell builtin"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "write error: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "error setting terminal attributes: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "error getting terminal attributes: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: error retrieving current directory: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: ambiguous job spec"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr "help not available in this version"
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: cannot unset: readonly %s"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: cannot unset"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: invalid action name"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: no completion specification"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "warning: -F option may not work as you expect"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "warning: -C option may not work as you expect"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "not currently executing completion function"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "can only be used in a function"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr "%s: reference variable cannot be an array"
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr "%s: nameref variable self references not allowed"
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s: circular name reference"
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "‘%s’: invalid variable name for name reference"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "cannot use ‘-f’ to make functions"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: readonly function"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr "%s: quoted compound array assignment deprecated"
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: cannot destroy array variables in this way"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: cannot convert associative to indexed array"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "dynamic loading not available"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "cannot open shared object %s: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "cannot find %s in shared object %s: %s"
+
+#: builtins/enable.def:388
+#, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: dynamic builtin already loaded"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr "load function for %s returns failure (%d): not loaded"
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: not dynamically loaded"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: cannot delete: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: is a directory"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: not a regular file"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: file is too large"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: cannot execute binary file"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: cannot execute: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "logout\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "not login shell: use ‘exit’"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "There are stopped jobs.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "There are running jobs.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "no command found"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "history specification"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: cannot open temp file: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "current"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "job %d started without job control"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: illegal option -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: option requires an argument -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "hashing disabled"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: hash table empty\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "hits\tcommand\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Shell commands matching keyword `"
+msgstr[1] "Shell commands matching keywords `"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+"'\n"
+"\n"
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"no help topics match ‘%s’.  Try ‘help help’ or ‘man -k %s’ or ‘info %s’."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: cannot open: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"These shell commands are defined internally.  Type ‘help’ to see this list.\n"
+"Type ‘help name’ to find out more about the function ‘name’.\n"
+"Use ‘info bash’ to find out more about the shell in general.\n"
+"Use ‘man -k’ or ‘info’ to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "cannot use more than one of -anrw"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "history position"
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: invalid timestamp"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: history expansion failed"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: inlib failed"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "no other options allowed with ‘-x’"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: arguments must be process or job IDs"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Unknown error"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "expression expected"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: not an indexed array"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: invalid file descriptor specification"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: invalid file descriptor: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: invalid line count"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: invalid array origin"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: invalid callback quantum"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "empty array variable name"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "array variable support required"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "‘%s’: missing format character"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "‘%c’: invalid time format specification"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "‘%c’: invalid format character"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "warning: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "format parsing problem: %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "missing hex digit for \\x"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "missing unicode digit for \\%c"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "no other directory"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s: invalid argument"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<no current directory>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "directory stack empty"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "directory stack index"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the ‘pushd’ command; you can get\n"
+"    back up through the list with the ‘popd’ command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by ‘dirs’, starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by ‘dirs’, starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The ‘dirs’ builtin displays the directory stack."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by ‘dirs’, starting with zero.  For example: ‘popd +0’\n"
+"    \tremoves the first directory, ‘popd +1’ the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by ‘dirs’, starting with zero.  For example: ‘popd -0’\n"
+"    \tremoves the last directory, ‘popd -1’ the next to last.\n"
+"    \n"
+"    The ‘dirs’ builtin displays the directory stack."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: invalid timeout specification"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "read error: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr "can only ‘return’ from a function or sourced script"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "cannot simultaneously unset a function and a variable"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: not an array variable"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: not a function"
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr "%s: cannot export"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "shift count"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "cannot set and unset shell options simultaneously"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: invalid shell option name"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "filename argument required"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: file not found"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "cannot suspend"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "cannot suspend a login shell"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s is aliased to ‘%s’\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s is a shell keyword\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s is a function\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s is a special shell builtin\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s is a shell builtin\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s is %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s is hashed (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: invalid limit argument"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "‘%c’: bad command"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: cannot get limit: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "limit"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: cannot modify limit: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "octal number"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "‘%c’: invalid symbolic mode operator"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "‘%c’: invalid symbolic mode character"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " line "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "last command: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Aborting..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr "INFORM: "
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "unknown command error"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "bad command type"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "bad connector"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "bad jump"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: unbound variable"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\atimed out waiting for input: auto-logout\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "cannot redirect standard input from /dev/null: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "TIMEFORMAT: ‘%c’: invalid format character"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr "execute_coproc: coproc [%d:%s] still exists"
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "pipe error"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr "eval: maximum eval nesting level exceeded (%d)"
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr "%s: maximum source nesting level exceeded (%d)"
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr "%s: maximum function nesting level exceeded (%d)"
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: restricted: cannot specify ‘/’ in command names"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: command not found"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: bad interpreter"
+
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: cannot execute binary file: %s"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "‘%s’: is a special builtin"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "cannot duplicate fd %d to fd %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "expression recursion level exceeded"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "recursion stack underflow"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "syntax error in expression"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "attempted assignment to non-variable"
+
+#: expr.c:530
+msgid "syntax error in variable assignment"
+msgstr "syntax error in variable assignment"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "division by 0"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "bug: bad expassign token"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "‘:’ expected for conditional expression"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "exponent less than 0"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "identifier expected after pre-increment or pre-decrement"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "missing ‘)’"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "syntax error: operand expected"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "syntax error: invalid arithmetic operator"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (error token is “%s�)"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "invalid arithmetic base"
+
+#: expr.c:1582
+msgid "invalid integer constant"
+msgstr "invalid integer constant"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "value too great for base"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: expression error\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: cannot access parent directories"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "cannot reset nodelay mode for fd %d"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr "cannot allocate new file descriptor for bash input from fd %d"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input: buffer already exists for new fd %d"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: pgrp pipe"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "forked pid %d appears in running job %d"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "deleting stopped job %d with process group %ld"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process: pid %5ld (%s) marked as still alive"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: no such pid"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Signal %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Done"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Stopped"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Stopped(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "Running"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Done(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Exit %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Unknown status"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(core dumped) "
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (wd: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "child setpgid (%ld to %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: pid %ld is not a child of this shell"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: No record of process %ld"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: job %d is stopped"
+
+#: jobs.c:3564
+#, c-format
+msgid "%s: no current jobs"
+msgstr "%s: no current jobs"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: job has terminated"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: job %d already in background"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr "waitchld: turning on WNOHANG to avoid indefinite block"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: line %d: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (core dumped)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(wd now: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: getpgrp failed"
+
+#: jobs.c:4447
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: no job control in background"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: line discipline"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "cannot set terminal process group (%d)"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "no job control in this shell"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: failed assertion: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "unknown"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: block on free list clobbered"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: called with already freed block argument"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: called with unallocated block argument"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: underflow detected; mh_nbytes out of range"
+
+#: lib/malloc/malloc.c:1001
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: underflow detected; magic8 corrupted"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: start and end chunk sizes differ"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: called with unallocated block argument"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc: underflow detected; mh_nbytes out of range"
+
+#: lib/malloc/malloc.c:1141
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc: underflow detected; magic8 corrupted"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: start and end chunk sizes differ"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: alloc table is full with FIND_ALLOC?\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: %p already in table as allocated?\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: %p already in table as free?\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "invalid base"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: host unknown"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: invalid service"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: bad network path specification"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "network operations not supported"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: cannot change locale (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: cannot change locale (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: cannot change locale (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: cannot change locale (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "You have mail in $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "You have new mail in $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "The mail in %s has been read\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "syntax error: arithmetic expression required"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "syntax error: ‘;’ unexpected"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "syntax error: ‘((%s))’"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: bad instruction type %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr "here-document at line %d delimited by end-of-file (wanted ‘%s’)"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr "make_redirection: redirection instruction ‘%d’ out of range"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr "maximum here-document count exceeded"
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "unexpected EOF while looking for matching ‘%c’"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "unexpected EOF while looking for ‘]]’"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "syntax error in conditional expression: unexpected token ‘%s’"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "syntax error in conditional expression"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "unexpected token ‘%s’, expected ‘)’"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "expected ‘)’"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "unexpected argument ‘%s’ to conditional unary operator"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "unexpected argument to conditional unary operator"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "unexpected token ‘%s’, conditional binary operator expected"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "conditional binary operator expected"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "unexpected argument ‘%s’ to conditional binary operator"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "unexpected argument to conditional binary operator"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "unexpected token ‘%c’ in conditional command"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "unexpected token ‘%s’ in conditional command"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "unexpected token %d in conditional command"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "syntax error near unexpected token ‘%s’"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "syntax error near ‘%s’"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "syntax error: unexpected end of file"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "syntax error"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Use “%s� to leave the shell.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "unexpected EOF while looking for matching ‘)’"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "completion: function ‘%s’ not found"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr "programmable_completion: %s: possible retry loop"
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: NULL COMPSPEC"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: bad connector ‘%d’"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: invalid file descriptor"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: NULL file pointer"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != fileno xtrace fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: ‘%c’: invalid format character"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "file descriptor out of range"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: ambiguous redirect"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: cannot overwrite existing file"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: restricted: cannot redirect output"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "cannot create temp file for here-document: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: cannot assign fd to variable"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "/dev/(tcp|udp)/host/port not supported without networking"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "redirection error: cannot duplicate fd"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "could not find /tmp, please create!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp must be a valid directory name"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr "pretty-printing mode ignored in interactive shells"
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: invalid option"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "cannot set uid to %d: effective uid %d"
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "cannot set gid to %d: effective gid %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr "cannot start debugger; debugging mode disabled"
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr "%s: Is a directory"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "I have no name!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, version %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "GNU long options:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Shell options:\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s or -o option\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr "Type ‘%s -c “help set�’ for more information about shell options.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr "Type ‘%s -c help’ for more information about shell builtin commands.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "Use the ‘bashbug’ command to report bugs.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr "bash home page: <http://www.gnu.org/software/bash>\n"
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: invalid operation"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Bogus signal"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Hangup"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Interrupt"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Quit"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Illegal instruction"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "BPT trace/trap"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "ABORT instruction"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "EMT instruction"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Floating point exception"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Killed"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Bus error"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Segmentation fault"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Bad system call"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Broken pipe"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Alarm clock"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Terminated"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Urgent IO condition"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Stopped (signal)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Continue"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Child death or stop"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Stopped (tty input)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Stopped (tty output)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "I/O ready"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "CPU limit"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "File limit"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Alarm (virtual)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Alarm (profile)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Window changed"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Record lock"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "User signal 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "User signal 2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "HFT input data pending"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "power failure imminent"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "system crash imminent"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "migrate process to another CPU"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "programming error"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "HFT monitor mode granted"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "HFT monitor mode retracted"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "HFT sound sequence has completed"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "Information request"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "Unknown Signal #%d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "bad substitution: no closing ‘%s’ in %s"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: cannot assign list to array member"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "cannot make pipe for process substitution"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "cannot make child for process substitution"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "cannot open named pipe %s for reading"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "cannot open named pipe %s for writing"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "cannot duplicate named pipe %s as fd %d"
+
+#: subst.c:6213
+msgid "command substitution: ignored null byte in input"
+msgstr "command substitution: ignored null byte in input"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "cannot make pipe for command substitution"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "cannot make child for command substitution"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute: cannot duplicate pipe as fd 1"
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: invalid variable name for name reference"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: invalid indirect expansion"
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr "%s: invalid variable name"
+
+#: subst.c:7256
+#, c-format
+msgid "%s: parameter not set"
+msgstr "%s: parameter not set"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: parameter null or not set"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: substring expression < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: bad substitution"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: cannot assign in this way"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "bad substitution: no closing “`� in %s"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "no match: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "argument expected"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: integer expression expected"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "‘)’ expected"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "‘)’ expected, found %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: binary operator expected"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: unary operator expected"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "missing ‘]’"
+
+#: test.c:899
+#, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "syntax error: ‘%s’ unexpected"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "invalid signal number"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr "trap handler: maximum trap handler level exceeded (%d)"
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: bad value in trap_list[%d]: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: bad signal %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "error importing function definition for ‘%s’"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "shell level (%d) too high, resetting to 1"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: no function context at current scope"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: variable may not be assigned value"
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr "%s: assigning integer to name reference"
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: no function context at current scope"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s has null exportstr"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "invalid character %d in exportstr for %s"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "no ‘=’ in exportstr for %s"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr "pop_var_context: head of shell_variables not a function context"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: no global_variables context"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr "pop_scope: head of shell_variables not a temporary environment scope"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: cannot open as FILE"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: invalid value for trace file descriptor"
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s: compatibility value out of range"
+
+#: version.c:46 version2.c:46
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Copyright (C) 2020 Free Software Foundation, Inc."
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, version %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr "This is free software; you are free to change and redistribute it."
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "There is NO WARRANTY, to the extent permitted by law."
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: cannot allocate %lu bytes"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: cannot allocate %lu bytes"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [name[=value] ... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] name [name ...]"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [shell-builtin [arg ...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [expr]"
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]] [-@]] [dir]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] command [arg ...]"
+
+#: builtins.c:78
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+
+#: builtins.c:80
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [option] name[=value] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [arg ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [arg ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f filename] [name ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [arg ...]"
+
+#: builtins.c:96
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts optstring name [arg ...]"
+
+#: builtins.c:98
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [job_spec]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [job_spec ...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p pathname] [-dt] [name ...]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [pattern ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [jobspec ... | pid ...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let arg [arg ...]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [name ...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [name[=value] ...] or export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [name[=value] ...] or readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source filename [arguments]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". filename [arguments]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [expr]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ arg... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[arg] signal_spec ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] name [name ...]"
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [mode]"
+
+#: builtins.c:177
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-fn] [-p var] [id ...]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [pid ...]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for NAME [in WORDS ... ] ; do COMMANDS; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select NAME [in WORDS ... ;] do COMMANDS; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] pipeline"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while COMMANDS; do COMMANDS; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until COMMANDS; do COMMANDS; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [NAME] command [redirections]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function name { COMMANDS ; } or name () { COMMANDS ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ COMMANDS ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "job_spec [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( expression ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ expression ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "variables - Names and meanings of some shell variables"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | dir]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [optname ...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v var] format [arguments]"
+
+#: builtins.c:231
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+
+#: builtins.c:235
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+
+#: builtins.c:239
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o option] [-DEI] [name ...]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+
+#: builtins.c:244
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, ‘alias’ prints the list of aliases in the reusable\n"
+"    form ‘alias NAME=VALUE’ on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '“\\C-x\\C-r�: re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+
+#: builtins.c:354
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns “$line $filename�.  With EXPR, returns\n"
+"    “$line $subroutine $filename�; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option ‘cdable_vars’ is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of ‘..’\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of ‘..’\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if ‘-L’ were specified.\n"
+"    ‘..’ is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, ‘pwd’ behaves as if ‘-L’ were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the ‘type’ builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+
+#: builtins.c:490
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the ‘integer’ attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the ‘trace’ attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using ‘+’ instead of ‘-’ turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the ‘let’ command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, ‘declare’ makes NAMEs local, as with the "
+"‘local’\n"
+"    command.  The ‘-g’ option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for ‘declare’.  See ‘help declare’."
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by ‘declare’.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+
+#: builtins.c:557
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    ‘echo’ interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix ‘special’ builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the ‘test’ found in $PATH instead of the shell builtin\n"
+"    version, type ‘enable -n test’.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+
+#: builtins.c:652
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ‘:’ into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places ‘?’ into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a ‘?’\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option ‘execfail’ is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the ‘fc -s [pat=rep ...] [command]’ format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing ‘r cc’\n"
+"    runs the last command beginning with ‘cc’ and typing ‘r’ re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with ‘&’.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a ‘*’.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow ‘-l’ they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see ‘readonly’.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of ‘--’ disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of ‘--’ disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its ‘sticky’ bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the “test� builtin, but the last argument must\n"
+"    be a literal ‘]’, to match the opening ‘[’."
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or ‘-’, each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with “kill -signal $$�.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe ‘-p’ option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if ‘type -t NAME’ would not return ‘file’\n"
+"      -t\toutput a single word which is one of ‘alias’, ‘keyword’,\n"
+"    \t\t‘function’, ‘builtin’, ‘file’ or ‘’, if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+
+#: builtins.c:1431
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the ‘soft’ resource limit\n"
+"      -H\tuse the ‘hard’ resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (‘nice’)\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values ‘soft’, ‘hard’, and ‘unlimited’ stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+
+#: builtins.c:1502
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The ‘for’ loop executes a sequence of commands for each member in a\n"
+"    list of items.  If ‘in WORDS ...;’ is not present, then ‘in “$@�’ is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If ‘in WORDS’ is not present, ‘in “$@�’\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    ‘|’ is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The ‘if COMMANDS’ list is executed.  If its exit status is zero, then "
+"the\n"
+"    ‘then COMMANDS’ list is executed.  Otherwise, each ‘elif COMMANDS’ list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    ‘then COMMANDS’ list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the ‘else COMMANDS’ list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    ‘while’ COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    ‘until’ COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is “COPROC�.\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the ‘fg’ command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a ‘&’ places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to ‘bg’.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+
+#: builtins.c:1726
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to ‘let “EXPRESSION�’.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the ‘test’ builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the ‘==’ and ‘!=’ operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the ‘=~’ operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to ‘cd’.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t‘time’ reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of ‘exact’ means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of ‘substring’ means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually ‘!’.  The second is\n"
+"    \t\tthe ‘quick substitution’ character, usually ‘^’.  The\n"
+"    \t\tthird is the ‘history comment’ character, usually ‘#’.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by ‘dirs’, starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by ‘dirs’, starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The ‘dirs’ builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by ‘dirs’, starting with zero.  For example: ‘popd +0’\n"
+"    \t\tremoves the first directory, ‘popd +1’ the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by ‘dirs’, starting with zero.  For example: ‘popd -0’\n"
+"    \t\tremoves the last directory, ‘popd -1’ the next to last.\n"
+"    \n"
+"    The ‘dirs’ builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the ‘pushd’ command; you can get\n"
+"    back up through the list with the ‘popd’ command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with ‘set -o’\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+
+#: builtins.c:1971
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to “empty� commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the “default� command completion\n"
+"    \t-E\t\tChange options for the “empty� command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using ‘+o’ instead of ‘-o’ turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the ‘complete’ builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for ‘mapfile’."
diff --git a/po/eo.gmo b/po/eo.gmo
new file mode 100644
index 0000000..4efbdee
--- /dev/null
+++ b/po/eo.gmo
diff --git a/po/eo.po b/po/eo.po
new file mode 100644
index 0000000..d47e83a
--- /dev/null
+++ b/po/eo.po
@@ -0,0 +1,6083 @@
+# Esperanto language file for GNU Bash.
+# Copyright (C) 2011 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+# Sergio Pokrovskij <sergio.pokrovskij@gmail.com>, 1998, ... 2019.
+#
+# -*- eval: (po-consider-source-path "~/Documents/Eo/Work/i18n/5.0/bash-5.0/builtins"); -*-
+# -*- eval: (po-consider-source-path "~/Documents/Eo/Work/i18n/5.0/bash-5.0"); -*-
+# Stilaj notoj:
+# La angulaj citiloj limigas «plurajn vortojn»,
+# 99-66 estas la citiloj de „unuvortaĵo‟
+#
+# La mesa�ojn pri internaj eraroj (markitajn per XXX) probable malnecesas traduki.
+#
+# ---- Glosaro:
+# associative array         asocitabelo (info "(bash)Arrays")
+# brace expansion           vinkulmalvolvo
+# callback                  retrovoko
+# compound array assignment tutopa tabelvalorizo
+# extended file attributes  kromatributoj (de dosiero)
+# to force                  ... per superforto
+# granted                   jesigita
+# here-document             tuj-dokumento (info "(bash)Redirections")
+# indexed array             entjerindica tabelo (info "(bash)Arrays")
+# positional parameter      numerparametro ($1 ...) (info "(bash)Positional Parameters")
+# resolve (symbolic links)  elnodigi
+# special builtin           speciala komando (info "(coreutils)Special built-in utilities")
+# substitution              anstataÅ­igo (info "(bash)Shell Expansions")
+# unset                     malvalorizi (variablon); malaktivigi, mal�alti (opcion, nomon)
+msgid ""
+msgstr ""
+"Project-Id-Version: GNU bash 5.0\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2019-01-09 16:32+0700\n"
+"Last-Translator: Sergio Pokrovskij <sergio.pokrovskij@gmail.com>\n"
+"Language-Team: Esperanto <translation-team-eo@lists.sourceforge.net>\n"
+"Language: eo\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "Misa tabel-indico"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr "%s: ne plu nomreferenco (la atributo nameref forigitas)"
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: Maleblas konverti entjerindican tabelon en asocitabelon"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: Misa asocitabela �losilo"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: Valorizato havu nombran indicon"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr "%s: %s: Valorizante per asocitabelo uzu indicon"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: Ne prosperis krei: %s"
+
+# XXX: internal_error
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr "bash_execute_unix_command: Mankas klavartabelo por komando"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: La unua ne-blankspaca signo ne estas „\"‟"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "Mankas ferma „%c‟ en %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: Mankas disiga dupunkto"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "%s: Ne eblas malligi"
+
+# XXX: internal_error
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr "vinkulmalvolvo: Maleblas memorhavigo por %s"
+
+# XXX: internal_error
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr "vinkulmalvolvo: Fiaskis memorhavigo por %u elementoj"
+
+# XXX: internal_error
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr "vinkulmalvolvo: Fiaskis memorhavigo por %s"
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "%s: MaltaÅ­gas por uzi kiel alinomon"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "liniredaktado ne estas ebligita"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "„%s‟: Misa nomo por klavartabelo"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: Ne eblas legi: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "%s: Nekonata funkcinomo"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s malhavas klavligon\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s vokeblas per "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "%s: Ne eblas malligi"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "iteracinombrilo"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "Sencas nur en iteracio „for‟, „while‟ aŭ „until‟"
+
+# caller [expr] =>
+# caller [ESPRIMO]
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Liveru la kuntekston de la kuranta procedurvoko\n"
+"\n"
+"    Se ESPRIMO malestas, liveru «$line $filename».  Se ESPRIMO\n"
+"    ĉeestas, liveru «$line $subroutine $filename»; ĉi tiu krominformo\n"
+"    uzeblas por vidigi la vok-stakon.\n"
+"\n"
+"    La valoro de ESPRIMO indikas, kiom da vokkadroj retroiri disde la\n"
+"    kuranta; la pinta kadro havas la numeron 0.\n"
+"\n"
+"    Elirstato:\n"
+"    Ĝi estas 0, kondiĉe ke la �elo plenumas �elfunkcion kaj la ESPRIMO\n"
+"    estas valida."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "HOME malhavas valoron"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "Tro multe da argumentoj"
+
+#: builtins/cd.def:342
+msgid "null directory"
+msgstr "NUL-dosierujo"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "OLDPWD malhavas valoron"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "linio %dª: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "Averto: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: Uzmaniero: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: La opcio bezonas argumenton"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: Necesas nombra argumento"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: Ne trovita"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: Misa opcio"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: Misa opcinomo"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "„%s‟ ne estas taŭga nomo"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "Misa okuma nombro"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "Misa 16uma nombro"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "Misa nombro"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: Misa signalindiko"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "„%s‟: Nek proceznumero, nek taŭga laborindiko"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: Nurlega variablo"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s estas ekster sia variejo"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "argumento"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s estas ekster sia variejo"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: Ne estas tia laboro"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: Ĉi tiu �elo ne disponigas laborregadon"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "Laborregado ne disponeblas"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: Limigita"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "limigita"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "„%s‟ ne estas primitiva komando �ela"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "Eraro ĉe skribo: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "Eraro ĉe agordado de terminalaj atributoj: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "Eraro ĉe akiro de terminalaj atributoj: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: Eraro ĉe provo determini la kurantan dosierujon: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: Ambigua laborindiko"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr "helpilo mankas en ĉi tiu versio"
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: Malaktivigo fiaskis: nurlega %s"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: Malaktivigo fiaskis"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: Misa nomo de ago"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: Kompletigo ne estas specifita"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "Averto: La opcio -F povas funkcii alie ol vi eble supozas"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "Averto: La opcio -C povas funkcii alie ol vi eble supozas"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "Ni ne estas en plenumado de kompletiga funkcio"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "Uzeblas nur ene de funkcio"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr "%s: Referenca variablo ne povas esti tabelo"
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr "%s: Nomreferenca variablo ne referencu sin mem"
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s: Cikla nomreferenco"
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "„%s“: Misa variablonomo por nomreferenco"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "„-f‟ ne estas uzebla por fari funkciojn"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: Nurlega funkcio"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr "%s: Tutopa tabelvalorizo citila estas evitinda"
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: Ĉi tiel ne eblas neniigi tabelvariablojn"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: Ne eblas konverti asocitabelon en entjerindican tabelon"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "Rultempa �argo ne disponeblas"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "Ne malfermi�is dinamika biblioteko %s: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "Mankas %s en la dinamika biblioteko%s: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: Ne �argita dinamike"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr "Ŝarga funkcio por %s liveris fiaskon (%d): ne �argite"
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: Ne �argita dinamike"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: Ne eblas forigi: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s estas dosierujo"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: Ne ordinara dosiero"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: Tro granda dosiero"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: Neplenumebla duuma dosiero"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: Maleblas plenumi: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "adiaÅ­\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "La �elo ne estas saluta; eliru per «exit»"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Restas haltigitaj laboroj.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Restas rulataj laboroj.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "Komando ne trovita"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "Historia indiko"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: Ne malfermi�is labordosiero: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "kuranta"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "La laboro %d estas lanĉita sen laborregado"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: Misa opcio -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: La opcio bezonas argumenton -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "Nomkonservado (haketado, «hashing») estas mal�altita"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: Hakettabelo estas malplena\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "Trafoj\tKomando\n"
+
+# ZZZ: aĉaj citiloj (fermita en la programo)
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Ŝelaj komandoj kongruaj kun la �losilvorto '"
+msgstr[1] "Ŝelaj komandoj kongruaj kun la �losilvortoj '"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"Helpaĵo pri „%s‟ malestas.\n"
+"Provu «help help» aŭ «man -k %s» aŭ «info %s»."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: Fiaskis malfermo de %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Jenaj komandoj estas enkonstruitaj.  Tajpu „help‟ por eligi la liston.\n"
+"Tajpu «help NOMO» por informoj pri la funkcio NOMO.\n"
+"Uzu «info bash» por la �enerala informo pri la �elo.\n"
+"Uzu «man -k» aŭ «info» por informo pri komandoj ĉi tie ne listigitaj.\n"
+"\n"
+"Steleto (*) tuj post nomo indikas, ke la komando estas malebligita.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "Ne pli ol unu el -anrw estas uzebla"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "pozicio en la historio"
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: MaltaÅ­ga tempomarko"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: Historia malvolvo fiaskis"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: inlib fiaskis"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "La uzo de „-x‟ malebligas aliajn opciojn"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: Argumento estu proceznumero aÅ­ laborindiko"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Nekonata eraro"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "Mankas esprimo"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: �i ne estas entjerindica tabelo"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: Misa indiko de dosiernumero"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: Misa dosiernumero: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: Misa lininombro"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: Misa tabelbazo"
+
+# Supozeble callback => retrovoko ??
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: Misa kvanto ĉe retrovoko"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "Mankas nomo de tabelvariablo"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "necesas subteno de tabelvariabloj"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "„%s‟: Mankas formata signo"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "%c: Misa tempoformato"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "„%c‟: Misa signo formata"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "Averto: %s: %s"
+
+# XXX: internal_error
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "Miso ĉe analizado de formato: %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "Mankas 16uma cifero por \\x"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "Post „%c‟ mankas unikoda cifero"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "Ne estas alia dosierujo"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s: MaltaÅ­ga argumento"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<mankas kuranta dosierujo>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "Dosierujstako malplenas"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "indico de dosierujstako"
+
+# dirs [-clpv] [+N] [-N]
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Listigu la kurantan dosierujstakon. La dosierujoj trafas en\n"
+"    la stakon per la komando „pushd‟ kaj estas forigeblaj per la\n"
+"    komando „popd‟.\n"
+"\n"
+"    Opcioj:\n"
+"    -c\tforvi�u la dosierujstakon (forigu ĉiujn erojn)\n"
+"    -l\tne uzu tildon en la dosierujnomoj bazitaj relative\n"
+"      \tal via hejma dosierujo\n"
+"    -p\teligu dosierujstakon lokante po unu eron sur linio\n"
+"    -v\teligu dosierujstakon lokante po unu eron sur linio,\n"
+"\tprefiksante la dosierujnomon per �ia numero en la stako\n"
+"\n"
+"    Argumentoj:\n"
+"    +N\teligu la Nan eron nombrante de maldekstre en la listo eligebla\n"
+"\tper „dirs‟ sen opcioj, numerante ekde 0.\n"
+"\n"
+"    -N\teligu la Nan eron nombrante de dekstre en la listo eligebla\n"
+"\tper „dirs‟ sen opcioj, numerante ekde 0."
+
+# pushd [dir | +N | -N] [-n]
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Surstakigu dosierujon sur la stakon da dosierujoj, aŭ cikle �ovu\n"
+"    la stakon tiel, ke la nova stakpinto i�u la kuranta dosierujo.\n"
+"    Senargumente, permutu la du plej suprajn dosierujojn de la stako.\n"
+"\n"
+"    Opcioj:\n"
+"    -n\tNe �an�u la kurantan dosierujon surstakigante dosierujon sur\n"
+"    \tla stakon; do, nur la stakon �an�u.\n"
+"\n"
+"    +N\tCikle �ovu la stakon tiel ke la Nª dosierujo (nombrante de\n"
+"    \tmaldekstre en la listo eligebla per „dirs‟, numerante de 0)\n"
+"        i�u la pinta.\n"
+"\n"
+"    -N\tCikle �ovu la stakon tiel ke la Nª dosierujo (nombrante de\n"
+"    \tdekstre en la listo eligebla per „dirs‟, numerante de 0) i�u\n"
+"        la pinta.\n"
+"\n"
+"    dir\tsurstakigu la dosierujon dir kaj faru �in la nova kuranta\n"
+"    \tdosierujo labora.\n"
+"\n"
+"    Vi povas vidigi la stakon da dosierujoj per la komando „dirs‟."
+
+# popd [+N | -N] [-n]
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Elstakigu erojn el la stako de dosierujoj.  Senargumente, forigu la\n"
+"    pintan dosierujon kaj iru (cd) en la novan pintan dosierujon.\n"
+"\n"
+"\n"
+"    Opcioj:\n"
+"    -n\tNe �an�u la kurantan dosierujon demetante dosierujon el la\n"
+"\tstako; do, nur la stakon �an�u.\n"
+"\n"
+"    Argumentoj:\n"
+"    +N\tforigu la Nan eron de maldekstre de la listo eligebla per\n"
+"\t„dirs‟, numerante ekde 0.  Ekz-e: «popd +0» forigas la plej\n"
+"\tmaldekstran dosierujon; «popd +1», �ian najbaron.\n"
+"\n"
+"    -N\tforigu la Nan eron de dekstre de la listo eligebla per „dirs‟,\n"
+"\tnumerante ekde 0.  Ekz-e: «popd -0» forigas la lastan\n"
+"\tdosierujon; «popd -1», la antaŭlastan.\n"
+"\n"
+"    Vi povas vidigi la stakon da dosierujoj per la komando „dirs‟."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: Misa indiko de atendotempo"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "Lega (read) eraro: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr ""
+"„return‟ sencas nur en funkcio aŭ punkte vokita („.‟, „source‟) skripto"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "Ne eblas samtempe malaktivigi funkcion kaj variablon"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: Ne tabela variablo"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: Ne funkcio"
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr "%s: Ne eblas eksporti"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "Nombrilo de „shift‟"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "Maleblas samtempe �alti kaj mal�alti �elan opcion"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: Misa nomo de �ela opcio"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "Necesas dosiernoma argumento"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: Dosiero ne trovita"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "Ne eblas halteti"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "Ne eblas haltetigi salutan �elon"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "„%s‟ alinomas jenon: «%s»\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "„%s‟ estas �losilvorto de la �elo\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s estas funkcio\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "„%s‟ estas speciala primitiva �elkomando\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "„%s‟ estas primitiva komando de la �elo\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "„%s‟ estas „%s‟\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "„%s‟ estas metita en hakettabelon (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: MaltaÅ­ga argumento por limo"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "„%c‟: Misa komando"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: Fiaskis provo legi limon: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "limo"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: Malprosperis �an�i limon: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "Okuma nombro"
+
+# Misa modifilo: «umask Z-w» aŭ «umask aZw»
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "„%c‟: Maltaŭga simbolo por atingorajta modifilo"
+
+# Misa kategorio: ne [rw] ktp
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "„%c‟: La signo ne estas simbolo de atingorajta kategorio"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " linio "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "La ĵusa komando: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Ĉesigado ..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr "INFORMO: "
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "Nekonata komand-eraro"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "Misa komandotipo"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "Misa stir-operacio"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "Misa salto"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: Neligita variablo"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\aTro longe sen enigo: AÅ­tomata seancofino\n"
+
+# XXX: internal error:
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "Fiaskis provo nomumi la disponaĵon «/dev/null» ĉefenigujo: %s"
+
+# XXX: internal error:
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "TIMEFORMAT: „%c‟: Misa formatsigno"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr "execute_coproc: la kunprocezo [%d:%s] ankoraÅ­ ekzistas"
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "Eraro en dukto"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr "eval: La ingado de „eval“oj superis sian maksimumon (%d)"
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr "%s: La ingado de „source“oj superis sian maksimumon (%d)"
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr "%s: La ingado de funkcioj superis sian maksimumon (%d)"
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: Malpermesitas uzi „/‟ en komandonomoj"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: Komando ne trovita"
+
+# XXX: internal error:
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: Misa interpretilo"
+
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: Neplenumebla duuma dosiero: %s"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "„%s‟ estas primitiva komando speciala"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "Ne eblas kunnomumi al dosiernumero %d la dosiernumeron %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "Tro profunda rekursio en esprimo"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "Rekursistako elĉerpita"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "Sintaksa eraro en esprimo"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "Provo valorizi ne-variablon"
+
+#: expr.c:530
+msgid "syntax error in variable assignment"
+msgstr "Sintaksa eraro en valorizo de variablo"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "Divido per 0"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "CIMO: Misa operacisigno en kombinita valorizsimbolo"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "„:‟ mankas kondiĉa esprimo"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "Negativa eksponento"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "Post antaÅ­kremento aperu nomo de variablo"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "Mankas „)‟"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "Sintaksa eraro: Mankas operando"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "Sintaksa eraro: Misa operacisimbolo aritmetika"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (misa simbolo estas „%s‟)"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "MaltaÅ­ga bazo nombrosistema"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: Misa lininombro"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "Tro granda valoro por bazo de nombrosistemo"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: Misa esprimo\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getwd: Ne eblas atingi patrajn dosierujojn"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "Ne eblas re�alti senprokrastan re�imon por dosiernumero %d"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr "Maleblas disponigi novan dosiernumeron por Ba�a enigo el n-ro %d"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input: La nova dosiernumero (fd %d) jam havas bufron"
+
+# ZZZ: sys_error (_("start_pipeline: pgrp pipe"));
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: procezgrupo dukto"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "Forke farita proceznumero %d aperas en rulata laboro %d"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "Haltigita laboro %d kun procezgrupo %ld estas forigata"
+
+# ifdef DEBUG ... internal_warning():
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process: pid %5ld (%s) marked as still alive"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: Ne estas tia proceznumero (%ld)!"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Signalo %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Farite"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Haltigita"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Haltigita(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "Rulata"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Farite(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Eliro %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Nekonata stato"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(nekropsio el�utita)"
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (labordosierujo: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "provo atribui (setpgid) procezgrupon %2$ld de la procezido %1$ld"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: La procezo %ld ne estas ido de ĉi tiu �elo"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: Malestas informoj pri procezo %ld"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: La laboro %d estas haltigita"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: Ne estas tia laboro"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: La laboro fini�is"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: La laboro %d jam estas fona"
+
+# XXX: internal warning:
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr "waitchld: WNOHANG i�as �altita por eviti nedifintan pendi�on"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: linio %dª: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr "(nekropsio el�utita)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(nun labordosierujo estas: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: getpgrp fiaskis"
+
+#: jobs.c:4447
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: laborregado ne funkcias en la fono"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: liniaran�o"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid()"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "ne prosperis atribui grupon (%d) de terminala procezo"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "Ĉi tiu �elo ne disponigas laborregadon"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: Malveras la aserto: %s\n"
+
+# XXX: debug?
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d: aserto sufokita\r\n"
+
+# XXX: internal error
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "nekonata"
+
+# XXX: debug?
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: Skribdifektita bloko en malokupa listo (free list)"
+
+# XXX: debug?
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: La argumento montras blokon jam malokupitan"
+
+# XXX: debug?
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: La argumento ne montras generitan memoron"
+
+# XXX: debug?
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: Okazis maltroo; mh_nbytes estas ekster sia variejo"
+
+# XXX: debug?
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: Okazis maltroo; mh_nbytes estas ekster sia variejo"
+
+# XXX: debug?
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: La ĉapa kaj vosta longoj de memorpeco ne estas egalaj"
+
+# XXX: debug?
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: La argumento ne montras generitan memoron"
+
+# XXX: debug?
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc: Okazis maltroo; mh_nbytes estas ekster sia variejo"
+
+# XXX: debug?
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc: Okazis maltroo; mh_nbytes estas ekster sia variejo"
+
+# XXX: debug?
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: La ĉapa kaj vosta longoj de memorpeco ne estas egalaj"
+
+# XXX: debug?
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: „alloc‟-tabelo elĉerpi�is je FIND_ALLOC?\n"
+
+# XXX: debug?
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: %p jam en la tabelo kvazaÅ­ kreita (?)\n"
+
+# XXX: debug?
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: %p jam en la tabelo kvazaÅ­ malokupita (?)\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "Misa bazo nombrosistema"
+
+# XXX: internal error
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: Nekonata retnodo"
+
+#  XXX: internal error
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: Misa servo-indiko"
+
+# XXX: internal error
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: Misa retvojo-indiko"
+
+# XXX: internal error
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "Reta funkciado ne disponeblas"
+
+# XXX: internal warning:
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: Maleblas �an�i lokaĵaron (%s)"
+
+# XXX: internal warning:
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: Maleblas �an�i lokaĵaron (%s): %s"
+
+# XXX: fatal_error
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: ne eblas �an�i la lokaĵaron (%s)"
+
+# XXX: fatal_error
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: ne eblas �an�i la lokaĵaron (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "Vi havas po�ton en $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "Nova po�to en $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "La po�to en %s estas jam legita\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "Sintaksa eraro: Necesas aritmetika esprimo"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "Sintaksa eraro: Neatendita „;‟"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "Sintaksa eraro: „((%s))‟"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: Misa ordontipo %d"
+
+# internal_warning():
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr "Tuj-dokumenton de linio %d limigas dosierfino (mankas „%s‟)"
+
+# XXX: programming_error
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr "make_redirection: Alidirektada komando „%d‟ ekster sia variejo"
+
+# internal_warning():
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+"shell_getc: shell_input_line_size (%zu) superas SIZE_MAX (%lu): la linio "
+"tranĉita"
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr "La nombro de tuj-documentoj superis sian maksimumon"
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "Neatendita dosierfino dum serĉo de responda „%c‟"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "Neatendita dosierfino dum serĉo de „]]‟"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "Sintaksa eraro en kondiĉa esprimo: Neatendita simbolo „%s‟"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "Sintaksa eraro en kondiĉa esprimo"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "Nekonvena simbolo „%s‟ anstataŭ „)‟"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "Mankas „)‟"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "La argumento „%s‟ ne konvenas por unuloka kondiĉa operacisimbolo"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "Maltaŭga argumento por unuloka kondiĉa operacisimbolo"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "Misa simbolo „%s‟ anstataŭ duloka kondiĉa operacisigno"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "ĉi tie devas esti duloka kondiĉa operacisigno"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "La argumento „%s‟ ne konvenas por duloka kondiĉa operacisimbolo"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "<maltaŭga argumento por duloka kondiĉa operacisimbolo"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "Misa simbolo „%c‟ en kondiĉa komando"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "Misa simbolo „%s‟ en kondiĉa komando"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "Misa simbolo „%d‟ en kondiĉa komando"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "Sintaksa eraro apud neatendita simbolo „%s‟"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "Sintaksa eraro apud „%s‟"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "Sintaksa eraro: Neatendita dosierfino"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "Sintaksa eraro"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Uzu «%s» por eliri el la �elo.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "Neatendita dosierfino dum serĉo de responda „)‟"
+
+# XXX: internal_error
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "Kompletigo: Funkcio „%s‟ ne trovita"
+
+# XXX: internal_warning
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr "programmable_completion: %s: ĉu ciklo de reprovoj?"
+
+# XXX: programming_error
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: NULL COMPSPEC"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: Misa stir-operacio „%d‟"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: Misa dosiernumero"
+
+# XXX: internal error:
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: dosierreferenco == NULL"
+
+# XXX: internal error:
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != fileno xtrace fp (%d)"
+
+# XXX: programming_error
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: „%c‟: Misa formatsigno"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "Ekstervarieja dosiernumero"
+
+# XXX: internal_error
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: Ambigua alidirektado"
+
+# XXX: internal_error
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: Maleblas surskribi ekzistantan dosieron"
+
+# XXX: internal_error
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: Limigita �elo: malpermesitas alidirekti eligon"
+
+# XXX: internal_error
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "Malprosperis krei labordosieron por tuj-dokumento: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: Maleblas konservi la dosiernumeron en la variablo"
+
+# XXX: internal_warning
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "«/dev/(tcp|udp)/host/port» ne disponeblas ekster retumado"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "Alidirektada eraro: Fiaskis kunnomumo al dosiernumero"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "Mankas «/tmp», bv krei �in!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "«/tmp» devas esti valida dosierujo"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr "La re�imo de struktura tekstaran�o ne funkcias en dialogaj �eloj"
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: Misa opcio"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "Ne eblas �an�i UID-on al %d: la efektiva UID estas %d"
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "Ne eblas �an�i GID-on al %d: la efektiva GID estas %d"
+
+# XXX: internal_warning
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr "Maleblas lanĉi erarserĉilon: la erarserĉa re�imo mal�altitas."
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr "%s : ĉi tio estas dosierujo"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "Mi ne havas nomon!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNUa «bash», versio %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Uzo:\t%s [GNUa opcio longforma] [opcio] ...\n"
+"\t%s [GNUa opcio longforma] [opcio] SKRIPTODOSIERO ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "GNUaj opcioj longformaj:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Åœelaj opcioj:\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-ilrsD aŭ -c KOMANDO aŭ -O SHOPT_OPCIO\t\t(nur ĉe voko)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s aÅ­ -o opcio\n"
+
+# bash --help
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr "Por pluaj informoj pri la opcioj tajpu: «%s -c \"help set\"»\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr "Por scii pli pri la primitivaj �elkomandoj tajpu: „%s -c help‟\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "Por raporti pri eraroj uzu la komandon „bashbug‟\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr ""
+"La hejmpa�o de Ba�o (anglalingva): <http://www.gnu.org/software/bash>\n"
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr ""
+"Äœenerala helpilo pri uzo de GNUa programaro: <http://www.gnu.org/gethelp/>\n"
+
+# XXX: internal_error
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: Misa operacio"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Åœtopsignalo"
+
+# Hangup detected on controlling terminal or death of controlling
+# process
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Malkonekto"
+
+# Interrupt from keyboard
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Interrompo"
+
+# Quit from keyboard
+#: siglist.c:58
+msgid "Quit"
+msgstr "Klavara eliro"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Miskomando"
+
+# SIGTRAP        5        Core    Trace/breakpoint trap
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "Spurada kontrolpunkto"
+
+# Abort signal from abort(3)
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "Komando ABORT"
+
+# SIGEMT is not specified in POSIX 1003.1-2001, but  neverthless  appears
+# on  most  other Unices, where its default action is typically to termi-
+# nate the process with a core dump.
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "EMT-komando"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Glitpunkta escepto"
+
+# SIGKILL       9       Term    Kill signal
+# Nek kaptebla nek ignorebla (malkiel ABORT)
+#: siglist.c:86
+msgid "Killed"
+msgstr "Murdu"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Bus-eraro"
+
+# SIGSEGV      11       Core    Invalid memory reference
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Adreseraro"
+
+# SIGSYS      12,-,12     Core    Bad argument to routine (SVID)
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Misa sistemvoko"
+
+# SIGPIPE      13       Term    Broken pipe: write to pipe with no readers
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Rompita dukto"
+
+# SIGALRM      14       Term    Timer signal from alarm(2)
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Vekhorlo�o"
+
+# SIGTERM     15       Term    Termination signal
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Fini�u"
+
+# SIGURG      16,23,21    Ign     Urgent condition on socket (4.2 BSD)
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Ur�a stato eneliga"
+
+# SIGSTOP   17,19,23    Stop    Stop process
+# Nek kaptebla nek ignorebla (samkiel SIGKILL)
+# Haltu (poste eblos plu iri, vd SIGCONT)
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Haltu (signalo)"
+
+# SIGCONT   19,18,25            Continue if stopped
+#: siglist.c:126
+msgid "Continue"
+msgstr "Pluen"
+
+# SIGCHLD   20,17,18    Ign     Child stopped or terminated
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Procezido mortis aÅ­ haltis"
+
+# SIGTTIN   21,21,26    Stop    tty input for background process
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Haltu (pro terminalenigo)"
+
+# SIGTTOU   22,22,27    Stop    tty output for background process
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Haltu (pro terminaleligo)"
+
+# SIGIO       23,29,22    Term    I/O now possible (4.2 BSD)
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "Eneligo pretas"
+
+# SIGXCPU     24,24,30    Core    CPU time limit exceeded (4.2 BSD)
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "Ĉefprocesora tempolimo"
+
+# SIGXFSZ     25,25,31    Core    File size limit exceeded (4.2 BSD)
+#: siglist.c:154
+msgid "File limit"
+msgstr "Dosiera longolimo"
+
+# SIGVTALRM   26,26,28    Term    Virtual alarm clock (4.2 BSD)
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Vekilo (virtuala)"
+
+# SIGPROF     27,27,29    Term    Profiling timer expired
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Vekilo (profilada)"
+
+# SIGWINCH    28,28,20    Ign     Window resize signal (4.3 BSD, Sun)
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Fenestro �an�i�is"
+
+# SIGLOST      -,-,-      Term    File lock lost
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Dosier�loso"
+
+# SIGUSR1   30,10,16    Term    User-defined signal 1
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Uzulsignalo 1ª"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Uzulsignalo 2ª"
+
+# Harbor File Transfer:
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "Pendas HFT-enigo"
+
+# SIGPWR      29,30,19    Term    Power failure (System V)
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "Energiprovizo paneontas"
+
+# SIGDANGER
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "La sistemo estas kra�onta"
+
+# SIGMIGRATE:
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "La procezo iru al alia ĉefprocesoro"
+
+# SIGPRE
+#: siglist.c:198
+msgid "programming error"
+msgstr "Programeraro"
+
+# SIGGRANT (monopola??)
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "HFT-monitorre�imo jesigita"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "HFT-monitorre�imo forprenita"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "HFT-sonsekvenco fini�is"
+
+# SIGINFO      29,-,-             A synonym for SIGPWR
+#: siglist.c:214
+msgid "Information request"
+msgstr "Informmendo"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "Nekonata signalo n-ro %d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "Misa anstataŭigo: Mankas ferma „%s‟ en %s"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: Maleblas valorizi tabelanon per listo"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "Ne prosperis fari dukton por proceza anstataÅ­igo"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "Ne prosperis krei idon por proceza anstataÅ­igo"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "Ne prosperis malfermi nomitan dukton %s porlegan"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "Ne prosperis malfermi nomitan dukton %s por skribado"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "Ne prosperis kunnomumi nomhavan dukton %s kiel dosiernumeron %d"
+
+#: subst.c:6213
+msgid "command substitution: ignored null byte in input"
+msgstr "Komanda anstataŭigo: nul-bajto en enigaĵo, ignorita"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "Ne prosperis fari dukton por komanda anstataÅ­igo"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "Ne prosperis krei procezidon por komanda anstataÅ­igo"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute: Ne prosperis kunnomumi la dosiernumeron 1 al dukto"
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: Misa variablonomo por nomreferenco"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: Misa malvolvo malrekta"
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr "%s: MaltaÅ­ga variablonomo"
+
+#: subst.c:7256
+#, c-format
+msgid "%s: parameter not set"
+msgstr "%s: Parametro estas malaktiva"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: Parametro estas NUL aÅ­ malaktiva"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: subĉeno-esprimo < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: Misa anstataÅ­igo"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: ĉi tiel ne valorizebla"
+
+# XXX: internal warning:
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+"Ontaj versioj de la �elo plenumos komputon kiel aritmetikan anstataŭigon"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "Misa anstataŭigo: Mankas ferma „`‟ en %s"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "Nenio kongrua: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "Mankas argumento"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: Mankas entjera esprimo"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "Mankas „)‟"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "Anstataŭ „)‟ trovi�as %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: Tie devas esti duloka operacisigno"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: Tie devas esti unuloka operacisigno"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "Mankas „]‟"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "Sintaksa eraro: Neatendita „;‟"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "Misa signalnumero"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr ""
+"trap handler: La nivelo de kaptilotraktiloj superis sian maksimumon (%d)"
+
+# XXX: internal_warning
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: Misa valoro en trap_list[%d]: %p"
+
+# XXX: internal_warning
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr "run_pending_traps: Signaltraktilo SIG_DFL resendas %d (%s) al mi mem"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: Misa signalnumero %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "Eraro ĉe importo de funkcidifino por „%s‟"
+
+# XXX: internal_warning
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "%d estas tro granda �elnivelo; mallevita �is 1"
+
+# XXX: internal_error
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: Malestas funkcia kunteksto en ĉi-regiono"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: Variablo ne valorizebla"
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr "%s: Nomreferenco valorizata per entjero"
+
+# XXX: internal_error
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: Malestas funkcia kunteksto en ĉi-regiono"
+
+# XXX: internal_error
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "«exportstr» de %s estas NUL"
+
+# XXX: internal_error
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "Misa signo %d en eksporta signoĉeno por „%s‟"
+
+# XXX: internal_error
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "Mankas „=‟ en eksporta signoĉeno por „%s‟"
+
+# XXX: internal_error
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr ""
+"pop_var_context: La kapo de „shell_variables‟ ne estas funkcia kunteksto"
+
+# XXX: internal_error
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: Mankas kunteksto de „global_variables‟"
+
+# XXX: internal_error
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr "pop_scope: La kapo de „shell_variables‟ ne estas provizora regiono"
+
+# XXX: internal_error
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: Ne malfermeblas kiel DOSIERO"
+
+# XXX: internal_error
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: Misa valoro por spurada dosiernumero (trace file descriptor)"
+
+# # XXX: internal_error
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s kongruo-nivelo estas ekster sia variejo"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Copyright (C) 2018 ĉe «Free Software Foundation, Inc.»"
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"La permesilo estas GPLv3+; t.e. GNU GPL, versio 3ª aŭ pli nova.\n"
+"La tekston vd ĉe <http://gnu.org/licenses/gpl.html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNUa «bash», versio %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr "Ĉi tiu programo estas libera; vi rajtas libere �in �an�i kaj pludoni."
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "NENIA GARANTIO estas donita, tiom kiom tion permesas la le�o."
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: Malsukcesis okupi %lu bajtojn (%lu bajtoj disponigitaj)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: Malsukcesis okupi %lu bajtojn"
+
+# XXX: fatal_error
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: Malsukcesis okupi %lu bajtojn (%lu bajtoj disponigitaj)"
+
+# XXX: fatal_error
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: Malsukcesis okupi %lu bajtojn"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [NOMO[=VALORO] ... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] NOMO [NOMO ...]"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpsvPSVX] [-m KLAVARTABELO] [-f DOSIERNOMO] [-q NOMO]\n"
+"          [-u NOMO] [-r KLAVAÄ´O] [-x KLAVAÄ´O:ÅœELKOMANDO]\n"
+"          [KLAVAĴO:READLINE-FUNKCIO AŬ READLINE-KOMANDO] "
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [N]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [N]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [ÅœELAÄ´O [ARG ...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [ESPRIMO]"
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]] [-@]] [DOSIERUJO]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] KOMANDO [ARG ...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilnrtux] [-p] [NOMO[=VALORO] ...]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilnrtux] [-p] NOMO[=VALORO] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [OPCIO] NOMO[=VALORO] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [ARG ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [ARG ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f DOSIERNOMO] [NOMO ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [ARG ...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts OPCIĈENO NOMO [ARG]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a NOMO] [KOMANDO [ARGUMENTOJ ...]] [ALIDIREKTADO ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [N]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [N]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr ""
+"fc [-e REDAKTILO] [-lnr] [UNUA] [LASTA] aÅ­\n"
+"fc -s [ÅœABLONO=ANST] [KOMANDO]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [LABORINDIKO]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [LABORINDIKO]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p VOJNOMO] [-dt] [NOMO ...]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [ÅœABLONO ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d POZICIO] [n] aÅ­\n"
+"history -awr [DOSIERNOMO] aÅ­\n"
+"history -ps ARG [ARG...]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr ""
+"jobs [-lnprs] [LABORINDIKO ...] aÅ­\n"
+"jobs -x KOMANDO [ARGS]"
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [LABORINDIKO ... | PROCEZNUMERO ...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s SIGSNOM | -n SIGNUM | -SIGNOM] [PN | LABORINDIKO] ... aÅ­\n"
+"kill -l [SIGNOM]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let ARG [ARG ...]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a TABELO] [-d DISIG] [-i TEKSTO]\n"
+"     [-n NSIGN] [-N NSIGN] [-p INVIT] [-t TLIM]\n"
+"     [-u DN] [NOMO ...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [N]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o OPCINOMO] [--] [ARG ...]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [NOMO ...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [NOMO[=VALORO] ...]  aÅ­  export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [NOMO[=VALORO] ...]   aÅ­   readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [N]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source DOSIERNOMO [ARGUMENTOJ]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". DOSIERNOMO [ARGUMENTOJ]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [ESPRIMO]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ ARG... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[ARG] SIGNALINDIKO ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] NOMO [NOMO ...]"
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [LIMO]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [REÄœIMO]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-fn] [IND ...]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [PN ...]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for NOMO [in VORTOJ ... ] ; do KOMANDOJ; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( ESPR1; ESPR2; ESPR3 )); do KOMANDOJ; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select NONO [in VORTOJ ... ;] do KOMANDOJ; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] DUKTO"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case VORTO in [ÅœABLONO [| ÅœABLONO]...) KOMANDOJ ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if KOMANDOJ; then KOMANDOJ; [ elif KOMANDOJ; then KOMANDOJ; ]... [ else "
+"KOMANDOJ; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while KOMANDOJ; do KOMANDOJ; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until KOMANDOJ; do KOMANDOJ; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [NOMO] KOMANDO [ALIDIREKTADOJ]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function NOMO { KOMANDOJ ; }  aÅ­  NOMO () { KOMANDOJ ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ KOMANDOJ ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "LABORINDIKO [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( ESPRIMO ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ ESPRIMO ]]"
+
+# Ĉu "variables" estas serĉa �losilo ?
+# T.e. "help var" aÅ­ "help variabl", sed ne "nelp variabloj"?
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "var - Nomoj kaj signifo de kelkaj �elvariabloj"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | DOSIERUJO]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [OPCINOMO ...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v VAR] FORMATO [ARGUMENTOJ]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o OPCIO] [-A AGO] [-G ÅœABLONO]\n"
+"         [-W VORTLISTO]  [-F FUNKCIO] [-C KOMANDO] [-X FILTRILO]\n"
+"         [-P PREFIKSO] [-S SUFIKSO] [NOMO ...]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o OPCIO]  [-A AGO] [-G ÅœABLONO]\n"
+"        [-W VORTLISTO]  [-F FUNKCIO] [-C KOMANDO] [-X FILTRILO]\n"
+"        [-P PREFIKSO] [-S SUFIKSO] [VORTO]"
+
+#: builtins.c:239
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o OPCIO] [-DEI] [NOMO ...]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-d DISIG] [-n KIOM] [-O ORIGINO] [-s KIOM] [-t] [-u DN]\n"
+"        [-C RETROVOKO] [-c KVANTO] [TABELO]"
+
+#: builtins.c:244
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-d DISIG] [-n KIOM] [-O ORIGINO] [-s KIOM] [-t]\n"
+"          [-u DN] [-C RETROVOKO] [-c KVANTO] [TABELO]"
+
+#  alias:
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Difinu aÅ­ listigu alinomojn.\n"
+"\n"
+"    Sen argumento aŭ kun la opcio  -p  „alias‟ eligas en la ĉefeligujon\n"
+"    la liston da alinomoj en la reuzebla formo «alias NOMO=VALORO».\n"
+"\n"
+"    Alie, ĉiu NOMO i�as difinita kiel alinomo por indikita VALORO.\n"
+"    Vosta spaceto en la VALORO kaŭzas teston, ĉu la sekva vorto estas\n"
+"    alinome anstataŭigenda ĉe la komputo de la alinomo.\n"
+"\n"
+"    Opcioj:\n"
+"    -p\teligu ĉiujn difinitajn alinomojn en reuzebla formo.\n"
+"\n"
+"    Elirstato:\n"
+"    La komando „alias‟ liveras „true‟ krom se aperas NOMO ne difinita\n"
+"    alinome."
+
+# unalias [-a] name [name ...]
+# unalias [-a] NOMO [NOMO ...]
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Forigu la NOMOjn el la listo de difinitaj alinomoj.\n"
+"\n"
+"    Opcioj:\n"
+"    -a\tSe enestas la opcio „-a‟, ĉiujn alinomojn forigu\n"
+"\n"
+"    Liveru sukceson krom se name ne estas difinita alinome."
+
+# bind [-lpvsPVS] [-m KLAVARTABELO] [-f DOSIERNOMO] [-q NOMO] [-u NOMO]
+#      [-r KLAVAÄ´O] [-x KLAVAÄ´O:ÅœELKOMANDO]
+#      [KLAVAĴO:READLINE-FUNKCIO AŬ READLINE-KOMANDO]
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"Difinu klavligojn kaj variablojn.\n"
+"\n"
+"    Ligu klavosekvencon al linilega funkcio, aÅ­ al makroo, aÅ­ valorizu\n"
+"    linilegan variablon.  La sintakso de ne-opcia argumento estas tiu\n"
+"    de «~/.inputrc», tamen la ligon oni esprimu unuargumente; ekz-e:\n"
+"    bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"\n"
+"    Opcioj:\n"
+"    -m KLAVARTABELO   Uzu KLAVARTABELOn dum la daŭro de ĉi tiu komando.\n"
+"                      La eblaj nomoj de klavartabelo estas: „emacs‟,\n"
+"                      „emacs-standard‟, „emacs-meta‟, „emacs-ctlx‟,\n"
+"                      „vi‟, „vi-move‟, „vi-command‟ kaj „vi-insert‟.\n"
+"    -l                Listigu funkcinomojn.\n"
+"    -P                Listigu funkcinomojn kaj klavligojn.\n"
+"    -p                Listigu funkcinomojn kaj klavligojn en formo\n"
+"                      reuzebla por enigo.\n"
+"    -S                Listigu makroajn klavsekvencojn kaj ilian valoron.\n"
+"    -s                Listigu makroajn klavsekvencojn kaj ilian valoron\n"
+"                      en formo reuzebla por enigo.\n"
+"    -V                Listigu variablonomojn kaj ilian valoron.\n"
+"    -v                Listigu variablonomojn kaj ilian valoron en formo\n"
+"                      reuzebla por enigo.\n"
+"    -q FUNKCINOMO     Demando pri la klavoj ligitaj al la FUNKCINOMO.\n"
+"    -u FUNKCINOMO     Malligu ĉiujn klavligojn disde la FUNKCINOMO.\n"
+"    -r KLAVAÄ´O        Forigu la ligon de la klavsekvenco KLAVAÄ´O\n"
+"    -f DOSIERNOMO     Legu klavligojn el DOSIERNOMO\n"
+"    -x KLAVAĴO:ŜELKOMANDO  La ŜELKOMANDO plenumi�u ĉe enigo de KLAVAĴO.\n"
+"    -X                Listigu klavosekvencojn ligitajn per „-x‟ kaj la\n"
+"                      koncernajn komandojn en formo reuzebla por enigo.\n"
+"    \n"
+"    Elirstato:\n"
+"    0, krom se nekonata opcio estas donita aÅ­ eraro okazis."
+
+# exit:
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Finu iteracion FOR, WHILE aÅ­ UNTIL\n"
+"\n"
+"    Eliru ekster iteracion FOR, WHILE aÅ­ UNTIL. Se N estas donita,\n"
+"    iru N iteraciajn nivelojn eksteren.\n"
+"\n"
+"    Elirstato:\n"
+"    Ĝi estas 0, kondiĉe ke N estas pli granda ol aŭ egala al 1."
+
+# continue:
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"DaÅ­rigu iteraciadon de ordono FOR, WHILE aÅ­ UNTIL\n"
+"\n"
+"    Pasu al la sekva iteraciero de  FOR, WHILE aÅ­ UNTIL.\n"
+"    Se N estas donita, eliru �is la nivelon de la Nª inganta\n"
+"    iteraciordono.\n"
+"\n"
+"    Elirstato:\n"
+"    Ĝi estas 0, kondiĉe ke N estas pli granda ol aŭ egala al 1."
+
+# builtin [shell-builtin [arg ...]]
+# builtin [ÅœELAÄ´O [ARG ...]]
+#: builtins.c:354
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Rulu primitivan �elkomandon\n"
+"\n"
+"    Plenumu primitivan �elkomandon ŜELAĴO kun la argumentoj ARG sen la\n"
+"    normala komadoserĉo.  Tio utilas se oni volas uzi la nomon de\n"
+"    �elaĵo por nomi funkcion, sed bezonas la koncernan primitivon en\n"
+"    la funkcio mem.\n"
+"\n"
+"    Elirstato:\n"
+"    Tiu de de ÅœELAÄ´O; aÅ­ malsukceso, se ÅœELAÄ´O ne estas primitiva\n"
+"    �elkomando."
+
+# caller [expr] =>
+# caller [ESPRIMO]
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Liveru la kuntekston de la kuranta procedurvoko\n"
+"\n"
+"    Se ESPRIMO malestas, liveru «$line $filename».  Se ESPRIMO\n"
+"    ĉeestas, liveru «$line $subroutine $filename»; ĉi tiu krominformo\n"
+"    uzeblas por vidigi la vok-stakon.\n"
+"\n"
+"    La valoro de ESPRIMO indikas, kiom da vokkadroj retroiri disde la\n"
+"    kuranta; la pinta kadro havas la numeron 0.\n"
+"\n"
+"    Elirstato:\n"
+"    Ĝi estas 0, kondiĉe ke la �elo plenumas �elfunkcion kaj la ESPRIMO\n"
+"    estas valida."
+
+# cd:
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"Ŝan�u la kurantan laboran dosierujon de la �elo.\n"
+"\n"
+"    La kuranta dosierujo i�u DOSIERUJO -- aŭ, se DOSIERUJO malestas,\n"
+"    la valoro de la variablo $HOME.\n"
+"\n"
+"    La variablo $CDPATH difinas la serĉvojon por la dosierujo\n"
+"    entenanta DOSIERUJOn.  En $CDPATH, dupunkto „:‟ apartigas\n"
+"    alternativajn dosierujojn, vakua dosierujnomo egalas la kurantan.\n"
+"    Se DOSIERUJO komenci�as per „/‟, la variablo $CDPATH ne estas uzata.\n"
+"\n"
+"    Se la dosierujo ne trovi�as, kaj la �ela opcio „cdable_vars‟ estas\n"
+"    �altita, la vorto estas interpretata kiel variablonomo.  Se tiu\n"
+"    variablo havas valoron, tiu valoro estas uzata kiel DOSIERUJO.\n"
+"\n"
+"    Opcioj:\n"
+"    -L\tlaÅ­u simbolajn Ligilojn: en DOSIERUJO, traktu la aperojn de\n"
+"\t„..“ antaŭ ol elnodigi la simbolajn ligilojn\n"
+"    -P\tuzu la Fizikan strukturon de dosierujoj, elnodiginte simbolajn\n"
+"\tligilojn de DOSIERUJO antaŭ ol trakti la aperojn de „..“\n"
+"    -e\teliru kun nenula elirstato se „-P‟ ĉeestas kaj la\n"
+"\tkuranta dosierujo ne estas determinebla\n"
+"    -@\tse la operaciumo tion ebligas, prezentu dosieron posedantan\n"
+"\tkromatributojn kiel dosierujon entenatan la dosieratributojn\n"
+"\n"
+"    Defaŭlte la simbolaj ligiloj estas laŭataj, kvazaŭ „-L‟ ĉeestus.\n"
+"    La traktado de „..“ konsistas en forigo de la ĵus-antaŭa vojnoma\n"
+"    ero retrodirekte �is la oblikvo „/“ aŭ la komenco de DOSIERUJO.\n"
+"\n"
+"    Elirstato:\n"
+"    Ĝi estas 0, se la dosieruj�an�o sukcesis, kaj se, ĉeeste de „-P‟,\n"
+"    $PWD sukcese valorizi�is; nenulo aliokaze."
+
+# pwd [-LP]
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"Eligu la nomon de kuranta labora dosierujo\n"
+"\n"
+"    Opcioj:\n"
+"    -L  eligu la valoron de $PWD, se �i indikas la kurantan laboran\n"
+"        dosierujon\n"
+"    -P  eligu la nomon de la fizika dosierujo, sen eventualaj simbolaj\n"
+"        ligiloj\n"
+"\n"
+"    Defaŭlte „pwd‟ kondutas tiel, kiel kun la opcio „-L‟.\n"
+"\n"
+"    Elirstato:\n"
+"    0, krom se aperas misa opcio aÅ­ la kuranta dosierujo estas\n"
+"    nelegebla."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Malplena ordono\n"
+"\n"
+"    Senefika: La komando nenion faras.\n"
+"\n"
+"    Elirstato:\n"
+"    Ĉiam sukcesa."
+
+# true
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Liveru sukcesan rezulton\n"
+"\n"
+"    Elirstato:\n"
+"    Ĉiam sukcesa."
+
+# false:
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Liveru fiaskon.\n"
+"\n"
+"    Elirstato:\n"
+"    Ĉiam malsukcesa."
+
+# command [-pVv] command [arg ...]
+# command [-pVv] KOMANDO [ARG ...]
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Plenumu simplan komandon aÅ­ vidigu informojn pri komandoj\n"
+"\n"
+"    Plenumu KOMANDOn kun ARGoj sen atenti eventualajn �elfunkciojn\n"
+"    samnomajn; aÅ­ vidigu informojn pri indikitaj KOMANDOj.  Uzeblas\n"
+"    por voki komandojn de disko malgraÅ­ la ekzisto de samnomaj\n"
+"    funkcioj.\n"
+"\n"
+"    Opcioj:\n"
+"    -p  Uzu la defaÅ­ltan valoron de la de la variablo $PATH (tio\n"
+"\tebligas trovi ĉiujn normajn utilaĵojn)\n"
+"    -v\tEligu komandopriskribon laŭ la maniero de la primitivaĵo „type‟\n"
+"    -V\tEligu pli detalan priskribon de KOMANDO\n"
+"\n"
+"    Elirstato:\n"
+"    Tiu de KOMANDO; aÅ­ malsukceso, se KOMANDO ne troveblas."
+
+# declare [-aAfFgilnrtux] [-p] [name[=value] ...]
+# declare [-aAfFgilnrtux] [-p] [NOMO[=VALORO] ...]
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"Difinu valorojn aÅ­ atributojn de variabloj.\n"
+"\n"
+"    Deklaru variablojn aÅ­ atribuu al ili atributojn.\tSe NOMOj\n"
+"    mankas, anstataŭe eligu la valoron de ĉiuj variabloj.\n"
+"\n"
+"    Opcioj:\n"
+"    -f\tla ago aÅ­ eligo koncernu nur la funkciajn NOMOjn kaj difinojn\n"
+"    -F\teligu nur funkcinomojn (ĉe erarserĉo, ankaŭ lininumeron kaj\n"
+"\tfontodosieran nomon) sen difinoj\n"
+"    -g  se uzita en �elfunkcio, kreu mallokan variablon;\n"
+"        aliokaze, ignoru\n"
+"    -p\teligu la atributojn kaj la valorojn de ĉiu NOMO\n"
+"\n"
+"    Opcioj atributdonaj:\n"
+"    -a\tla NOMOj estu entjerindicaj tabeloj (se realigite)\n"
+"    -A\tla NOMOj estu asocitabeloj (se realigite)\n"
+"    -i\thavigu al la variabloj NOMOj la atributon „integer‟ (entjera)\n"
+"    -l\tminuskligu la valoron de ĉiu NOMO ĉe valorizo\n"
+"    -n  NOMO estu referenco al variablo nomata per �ia valoro\n"
+"    -r\tla variabloj NOMOj estu nurlegaj\n"
+"    -t\thavigu al la NOMOj la atributon „trace‟ (spurata)\n"
+"    -u\tmajuskligu la valoron de ĉiu NOMO ĉe valorizo\n"
+"    -x\teksportu la variablojn NOMOj\n"
+"\n"
+"    La uzo de „+‟ anstataŭ „-‟ mal�altas la koncernan attributon.\n"
+"\n"
+"    Por la variabloj posedantaj la atributon entjera, ĉe ĉiu valorizo\n"
+"    okazas aritmetika komputado (vd la komandon „let‟).\n"
+" \n"
+"    Uzite en funkcio, „declare‟ faras la NOMOjn lokaj, samkiel la\n"
+"    komando „local‟.  La opcio „-g‟ ĉi tiun efikon abolas.\n"
+"\n"
+"    Eliistato:\n"
+"    Sukceso, krom se aperas misa opcio aŭ okazas eraro ĉe valorizo de "
+"variablo."
+
+# typeset [-aAfFgilrtux] [-p] name[=value] ...
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"Difinu atributojn kaj valorojn de variabloj\n"
+"\n"
+"   Sinonimo de „declare“. Vd «help declare»."
+
+# local [option] name[=value] ...
+# local [OPCIO] NOMO[=VALORO] ...
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Difinu lokajn variablojn\n"
+"\n"
+"    Kreu lokan variablon NOMO kaj �in valorizu per VALORO.  OPCIO\n"
+"    povas esti ajna el la opcioj de „declare‟.\n"
+"\n"
+"    Lokaj variabloj uzeblas nur ene de funkcio; ili estas videblaj nur\n"
+"    en la funkcio kie ili estas difinitaj kaj en �iaj idoj.\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, krom se aperas misa opcio, okazas valoriza eraro, aÅ­ la\n"
+"    �elo ne estas plenumanta funkcion."
+
+# echo:
+#: builtins.c:557
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Eligu la argumentojn en la ĉefeligujon\n"
+"\n"
+"    Eligu en la ĉefeligujon la ARGojn disigante ilin per po unu\n"
+"    spaceto, postmetu linirompon.\n"
+"\n"
+"    Opcioj:\n"
+"    -n\tne aldonu la finan linirompon\n"
+"    -e\taktivigu interpretadon de la ĉi-subaj eskapaj deklivaĵoj\n"
+"    -E\tmalaktivigu interpretadon de la ĉi-subaj espapaj deklivaĵoj\n"
+"\n"
+"    „echo‟ povas interpreti la sekvajn literojn prefiksitajn per\n"
+"    deklivo (per la signo „\\‟):\n"
+"\t\\a\tpepo (sonsignalo)\n"
+"\t\\b\tretropa�o\n"
+"\t\\c\tĉesigu pluan eligon\n"
+"\t\\e\teskapsigno\n"
+"\t\\E\teskapsigno\n"
+"\t\\f\tpa�-avanco\n"
+"\t\\n\tlinifino\n"
+"\t\\r\tĉaretreveno\n"
+"\t\\t\thorizontala tabo\n"
+"\t\\v\tvertikala tabo\n"
+"\t\\\\\tdeklivo „\\‟\n"
+"\t\\0CCC\tla signo kies Askia kodono estas CCC (okume).  CCC\n"
+"\t\tpovas enteni 0, 1, 2 aÅ­ 3 okumajn ciferojn\n"
+"\t\\xHH\tla signo kies 8-bita kodono estas HH (16-ume).  HH\n"
+"\t\tpovas enteni unu aÅ­ du 16-umajn ciferojn\n"
+"        \\uHHHH  la Unikoda signo kies kodono estas la 16-uma\n"
+"                nombro HHHH.  HHHH povas enteni de unu �is kvar\n"
+"                16-umajn ciferojn.\n"
+"        \\UHHHHHHHH  la Unikoda signo kies kodono estas la 16-uma\n"
+"                nombro HHHHHHHH.  HHHHHHHH povas enteni de unu �is\n"
+"                ok 16-umajn ciferojn.\n"
+"\n"
+"    Elirstato:\n"
+"    Sukcesa, krom se okazas elig-eraro."
+
+# echo [-n] [ARG ...]
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Skribu argumentojn en la ĉefeligujon\n"
+"\n"
+"    Eligu la ARGojn en la ĉefeligujon, aldonu linifinilon.\n"
+"\n"
+"    Opcio:\n"
+"    -n  Ne aldonu postan linifinilon\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, krom se okazas skriberaro."
+
+# enable [-a] [-dnps] [-f filename] [name ...]
+# enable [-a] [-dnps] [-f DOSIERNOMO] [NOMO ...]
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"Aktivigu aÅ­ malaktivigu primitivajn komandojn\n"
+"\n"
+"    Aktivigu aŭ malaktivigu primitivajn �elkomandojn.  Tio ebligas\n"
+"    uzi eksteran komandon, samnoman kun primitivaĵo, sen indiki\n"
+"    �ian plenan vojon.\n"
+"\n"
+"    Opcioj:\n"
+"    -a\tListigu la primitivaĵojn indikante, ĉu ili estas aktivaj\n"
+"    -n  Malaktivigu la NOMOjn, aŭ listigu la malaktivajn primitivaĵojn\n"
+"    -p\tListigu primitivaĵojn en formo taŭga por reuzo\n"
+"    -s  Eligu nur la «specialajn» �elfunkciojn de Posix\n"
+"\n"
+"    Opcioj regantaj dinamikan �argadon:\n"
+"    -f\tŜargu primitivaĵon NOMO el la dinamika biblioteko DOSIERNOMO\n"
+"    -d  Forigu �elkomandon dinamike �argitan per  -f\n"
+"\n"
+"    Senopcie: Aktivigu ĉiujn NOMOjn\n"
+"\n"
+"    Ekz-e por uzi la „test‟on troveblan en  $PATH  anstataŭ la\n"
+"    samnoman primitivan �elkomandon, diru: «enable -n test».\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, krom se NOMO ne estas primitiva �elkomando aŭ okazis\n"
+"    eraro."
+
+# eval [ARG ...]
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Plenumu argumentojn kiel �elkomandon\n"
+"\n"
+"    Kunmetu la ARGojn en unu ĉenon, uzu la rezulton kiel enigaĵon por\n"
+"    la �elo kaj plenumu la legita(j)n komando(j)n.\n"
+"\n"
+"    Elirstato:\n"
+"    Tiu de la komandoĉeno; sukceso, se la komando estas vakua."
+
+# getopts optstring name [arg] =>
+# getopts OPCIĈENO NOMO [ARG]
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"Analizu opciajn argumentojn\n"
+"\n"
+"    La funkcion „getopts‟ uzas �elproceduroj por analizi opciformajn\n"
+"    numerparametrojn.\n"
+"\n"
+"    La argumento OPCIĈENO entenas la rekonendajn opciliterojn; se\n"
+"    literon sekvas dupunkto, la opcio postulas argumenton, disde �i\n"
+"    apartigendan per blanka spaco.\n"
+"\n"
+"    Ĉe ĉiu voko „getopts‟ liveros la vican opcion en la �elvariablon\n"
+"    $NOMO (estigante la variablon se �i ne ekzistas); kaj la indicon\n"
+"    de la sekve traktota argumento en la �elvariablon OPTIND.  OPTIND\n"
+"    ricevas la komencan valoron  1  ĉe ĉiu voko de la �elo aŭ �ela\n"
+"    skripto.  Kiam opcio bezonas argumenton, „getopts‟ liveras tiun\n"
+"    argumenton en la �elvariablon  OPTARG.\n"
+"\n"
+"    La funkcio „getopts‟ raportas pri eraroj dumaniere. Se la unua\n"
+"    signo de OPCIĈENO estas dupunkto,  „getopts‟  prisilentas\n"
+"    erarojn.  En tiu re�imo, nenia erarmesa�o estas eligata.\n"
+"    Renkontinte misan opcion, „getopts‟ metas la trovitan opciliteron\n"
+"    en  OPTARG.  Se mankas bezonata argumento, la �elvariablo  NOMO\n"
+"    ricevas la valoron  ':', kaj la variablo OPTARG,  la trovitan\n"
+"    opcion.  Se „getopts‟ ne estas en silenta re�imo kaj trovas\n"
+"    misan opcion, tiam NOMO ricevas la valoron '?' kaj  OPTARG\n"
+"    senvalori�as.  Se mankas bezonata opcio, NOMO ricevas la\n"
+"    valoron '?', OPTARG senvalori�as kaj erarmesa�o estas eligata.\n"
+"\n"
+"    Se la �elvariablo  OPTERR  havas la valoron  0,  „getopts‟\n"
+"    malaktivigas la eligon de erarmesa�oj, eĉ se la unua signo de\n"
+"    OPCIĈENO ne estas dupunkto.  La apriora valoro de OPTERR estas 1.\n"
+"\n"
+"    Normale „getopts‟ analizas la numerparametrojn  ($0 - $9), sed se\n"
+"    estas pli da argumentoj, „getopts‟ anstataŭe analizas ilin.\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, se opcio estas trovita; malsukceso, se renkonti�is\n"
+"    la fino de la opcioj aÅ­ okazis eraro."
+
+# exec [-cl] [-a name] [command [arguments ...]] [redirection ...]
+# exec [-cl] [-a NOMO] [KOMANDO [ARGUMENTOJ ...]] [ALIDIREKTADO ...]
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"Anstataŭigu la �elon je la donita komando\n"
+"\n"
+"    Plenumu la KOMANDOn, anstataŭigante la �elon je la donita\n"
+"    programo.  La ARGUMENTOj servas kiel argumentoj por KOMANDO.\n"
+"    Se KOMANDO ne estas indikita, la alidirektadoj okazu en \n"
+"    la kuranta �elo.\n"
+"\n"
+"    Opcioj:\n"
+"    -a NOMO  Pasigu NOMOn al KOMANDO kiel la argumenton  argv[0]\n"
+"    -c\tLa plenumo de KOMANDO okazu en vakua medio\n"
+"    -l\tMetu minuson en la nulan argumenton pasigatan al KOMANDO\n"
+"\n"
+"    Se la komandon ne eblas plenumi kaj la �elo ne estas dialoga, tiam\n"
+"    la �elo fini�as, krom se la opcio „execfail‟ estas aktiva.\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, krom se KOMANDO ne estas trovita aÅ­ okazis eraro pri\n"
+"    alirektado."
+
+# exit [n]
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Forlasu la �elon\n"
+"\n"
+"    Forlasu la �elon kun elirstato N.  Se  N  mankas, la elirstato\n"
+"    estas tiu de la plej ĵuse plenumita komando."
+
+# logout [N]
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Adiaŭ, saluta �elo!\n"
+"\n"
+"    Eliru el saluta �elo kun la elirstato  N.  Liveru malsukceson, se\n"
+"    plenumate ne en saluta �elo."
+
+# ZZZ: fc [-e ename] [-nlr] [first] [last] or
+#      fc -s [pat=rep] [command] =>
+# fc [-e REDAKTILO] [-lnr] [UNUA] [LASTA] aÅ­
+# fc -s [ÅœABLONO=ANST] [KOMANDO]
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"Eligu aÅ­ plenumu komandojn el la historilisto\n"
+"\n"
+"    „fc‟ servas por listigi aŭ redakti kaj replenumi komandojn el la\n"
+"    historilisto.  UNUA  kaj  LASTA  povas esti numeroj, indikantaj\n"
+"    intervalon da numeroj; aŭ, se  UNUA  estas signoĉeno, �i indikas\n"
+"    la plej ĵusan komandon komenci�antan per tiu signoĉeno.\n"
+"\n"
+"    Opcioj:\n"
+"    -e REDAKTILO\tla uzota redaktilo.  DefaÅ­lte FCEDIT, poste\n"
+"\tEDITOR, poste „vi‟\n"
+"    -l\tnur eligu la liniojn sen redakti ilin\n"
+"    -n\teligu sennumere (nur la liniojn)\n"
+"    -r\tinversigu la ordon de la linioj (komencu per la plej ĵusaj).\n"
+"\n"
+"    «fc -s [ŜABLONO=ANST ...] [KOMANDO]» plenumas la KOMANDOn en kiu\n"
+"    ĉiu apero de ŜABLONO estas la anstataŭigita je ANST.\n"
+"\n"
+"    Oportuna alinomo por tio estas «alias r='fc -s'», tiel ke ekz-e per\n"
+"    «r cc» oni rulos la plej ĵusan komandon komenci�antan per «cc», kaj\n"
+"    per «r» replenumigas la ĵusan komandon.\n"
+"\n"
+"    Elisrstato:\n"
+"    Sukceso, aÅ­ la elirstato de la plenumita KOMANDO; nenulo, se okazis\n"
+"    eraro."
+
+# fg [job_spec] => fg [LABORINDIKO]
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Movu laboron en la dialogon\n"
+"\n"
+"    Faru la laboron  LABORINDIKO  dialoga kaj la kuranta.  Se\n"
+"    LABORINDIKO malestas, apliku la �elan koncepton pri la kuranta\n"
+"    laboro.\n"
+"\n"
+"    Elirstato:\n"
+"    Tiu de la dialogigita komando; aÅ­ malsukceso, se okazis eraro."
+
+# bg [job_spec] => bg [LABORINDIKO]
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"For�ovu laboron fonen\n"
+"\n"
+"    For�ovu la laboron  LABORINDIKO  en la fonon, faru �in kvazaŭ\n"
+"    lanĉita kun „&‟.  Se nenia laboro estas indikita, apliku la\n"
+"    �elan koncepton pri la kuranta laboro.\n"
+"\n"
+"    Elirstato:\\n\"\n"
+"    Sukceso, kondiĉe ke laborregadon estas �altita kaj ne okazis\n"
+"    eraro."
+
+# hash [-lr] [-p VOJNOMO] [-dt] [NOMO ...]
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"Registru aÅ­ vidigu vojnomojn de programoj\n"
+"\n"
+"    Por ĉiu komando NOMO, trovu kaj registru en hakettabelo la\n"
+"    kompletan vojon al ties programo.  Se nenia argumento estas\n"
+"    donita, eligu la informojn pri la memorataj komandoj.\n"
+"\n"
+"    Opcioj:\n"
+"    -d  Forgesu la registritajn vojojn por ĉiu NOMO\n"
+"    -l  Eligu en formo reuzeblan por enigo\n"
+"    -p VOJNOMO\tuzu VOJNOMOn kiel kompletan vojon por la NOMO\n"
+"    -r  Forgesu ĉiujn registritajn vojojn\n"
+"    -t  Eligu la registritajn vojojn por ĉiu NOMO, mentante la NOMOn\n"
+"        titole antaŭ �ia vojo se estas pluraj NOMOj\n"
+"\n"
+"    Argumentoj:\n"
+"    NOMO  Ĉiu NOMO estas serĉota en $PATH kaj registrota en la\n"
+"\thakettabelo de registritaj komandoj\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, krom se aperas netrovebla NOMO aÅ­ misa opcio."
+
+# help [-ds] [pattern ...]
+# help [-ds] [ÅœABLONO ...]
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Vidigu informon pri prmitivaj komandoj\n"
+"\n"
+"    Eligu mallongan resummon pri la primitivaj komandoj.  Se ĉeestas\n"
+"    ŜABLONO, eligu detalan helpon pri ĉiuj komandoj kongruaj kun la\n"
+"    �ablono; alie eligu nur liston da temoj.\n"
+"\n"
+"    Opcioj:\n"
+"    -d\tEligu mallongajn priskribojn de ĉiuj temoj\n"
+"    -m\tVidigu uzmanieron en la „manpa�a‟ stilo (kiel la komando „man‟)\n"
+"    -s\tEligu nur mallongan resumon pri ĉiu trovita kongruaĵo\n"
+"\n"
+"    Argumentoj:\n"
+"    ŜABLONO  Komenca signoĉeno de temtitolo\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, krom se mankas kongruaĵoj por ŜABLONO, aŭ aperis\n"
+"    misa opcio."
+
+# ZZZ history [-c] [-d offset] [n] or
+#     history -awr [filename] or
+#     history -ps arg [arg...] =>
+# history [-c] [-d POZICIO] [n] aÅ­
+# history -awr [DOSIERNOMO] aÅ­
+# history -ps ARG [ARG...]
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Eligu aÅ­ redaktu la historiliston.\n"
+"\n"
+"    Eligu la liston de enigitaj komandoj kun lininumeroj. La �an�itajn\n"
+"    liniojn marku per  „*‟.  Kun argumento  n,  eligu nur la ĵusajn\n"
+"    n  liniojn.\n"
+"\n"
+"    Opcioj:\n"
+"    -c  forvi�u la tutan historion (forigu ĉiujn erojn el la listo)\n"
+"    -d POZICIO  forvi�u la linion kies numero estas  POZICIO.  Por\n"
+"        POZICIO negativa la numerado iras reen ekde la fino de la\n"
+"        historio \n"
+"    -a  aldonu la historiliniojn de la kuranta seanco al la\n"
+"        historidosiero\n"
+"    -n  legu ĉiujn ankoraŭ ne legitajn liniojn el la historidosiero\n"
+"        kaj aldonu ilin en la historiliston\n"
+"    -r  legu la dosieron kaj aldonu �ian enhavon al la kuranta\n"
+"        historilisto\n"
+"    -w  konservu la kurantan historion en la historidosiero\n"
+"\n"
+"    -p  plenumu historian anstataŭigon por ĉiu el la argumentoj ARG\n"
+"        kaj eligu la rezulton sen konservi ion en la historilisto\n"
+"\n"
+"    -s  en�ovu la neopciajn argumentojn  ARG  en la historiliston\n"
+"        kiel unu apartan linion\n"
+"\n"
+"    Se ĉeestas  DOSIERNOMO,  uzu �in kiel nomon de historidosiero;\n"
+"    alie, se la variablo HISTFILE havas valoron, uzu ĉi tiun;\n"
+"    alie uzu «~/.bash_history».\n"
+"\n"
+"    Se la variablo HISTTIMEFORMAT havas valoron kaj se ĉi tiu ne\n"
+"    estas null, tiam �i servu kiel formata ĉeno en  strftime(3)  por\n"
+"    tempostampi ĉiun linion en eligaĵoj de historio.  Aliokaze nenia\n"
+"    tempostampo estu eligata.\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, krom se renkonti�as mis opcio aŭ okazis eraro."
+
+# ZZZ jobs [-lnprs] [jobspec ...] or
+#     jobs -x command [args] =>
+# jobs [-lnprs] [LABORINDIKO ...] aÅ­
+# jobs -x KOMANDO [ARGS]
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"Montru la staton de laboroj\n"
+"\n"
+"    Eligu liston da aktivaj laboroj.  Se  LABORINDIKO  estas donita,\n"
+"    nur pri tiu laboro informu.  Senopcie, montru la staton de ĉiuj\n"
+"    aktivaj laboroj.\n"
+"\n"
+"    Opcioj:\n"
+"    -l  eligu, krom la normalajn informojn, ankaÅ­ la proceznumerojn\n"
+"    -n  listigu nur la procezojn kies stato �an�i�is post la lasta\n"
+"        informmendo\n"
+"    -p  eligu nur la proceznumerojn\n"
+"    -r  informu nur pri la laboroj aktivaj (rulataj)\n"
+"    -s  informu nur pri la laboroj haltigitaj\n"
+"\n"
+"    La opcio -x lanĉas la  KOMANDOn,  antaŭe �an�inte ĉiujn\n"
+"    laborindikojn aperantajn en la argumentoj  ARGS  je la\n"
+"    proceznumero de la ĉefprocezo de la grupo.\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, krom se enestas misa opcio aÅ­ okazis eraro.\n"
+"    Ĉe „-x‟, la elirstato de la KOMANDO."
+
+# disown [-h] [-ar] [jobspec ...]
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"Forigu laborojn el la kuranta �elo\n"
+"\n"
+"    Forigu ĉiun laboron indikitan per argumento  LABORINDIKO  el\n"
+"    la tabelo de aktivaj laboroj.  Se nenia laboro estas indikita,\n"
+"    apliku la �elan koncepton pri la kuranta laboro.\n"
+"\n"
+"    Opcioj:\n"
+"    -a  forigu ĉiujn laborojn el la labortabelo\n"
+"    -h  anstataŭ forigi laboron el la tabelo, marku �in tiel, ke la\n"
+"        signalo SIGHUP ne estu plusendita al la laboro(j) kiam tian\n"
+"        signalon ricevas la �elo\n"
+"    -r  forigu nur rulatajn laborojn\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, krom se enestas misa opcio aÅ­ LABORINDIKO."
+
+# ZZZ: kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or
+#      kill -l [sigspec] =>
+# kill [-s SIGSNOM | -n SIGNUM | -SIGNOM] PN | LABORINDIKO ... aÅ­
+# kill -l [SIGNOM]
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Sendu signalon al laboro\n"
+"\n"
+"    Sendu al la procezoj, indikitaj per sia proceznumero  PN  (aÅ­\n"
+"    per la LABORINDIKO) la signalon  SIGNOM  aÅ­  SIGNUM.  Se nek\n"
+"    SIGNUM  nek  SIGNOM  enestas, sendu SIGTERM.\n"
+"\n"
+"    Opcioj:\n"
+"    -s\tSIGNOM estas nomo de signalo\n"
+"    -n\tSIGNUM estas numero de signalo\n"
+"    -l  listigu signalnomojn; la eventuale sekvantaj entjeraj\n"
+"        argumentoj estas signalnumeroj, ĉeeste de kiuj nur la al\n"
+"        ili respondaj signalnomoj estu eligataj\n"
+"    -L  sinonimo por  -l\n"
+"\n"
+"    „kill‟ estas primitiva �elkomando pro du kaŭzoj:\n"
+"    unue, �i ebligas uzi laborindikojn anstataŭ proceznumerojn;\n"
+"    kaj due, se la maksimuma nombro de kreeblaj procezoj estas\n"
+"    atingita, ne necesas lanĉi kroman procezon por ĉesigi iun alian.\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, krom se enestas misa opcio aÅ­ okazis eraro."
+
+# let arg [arg ...]
+# let ARG [ARG ...]
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"Komputu aritmetikan esprimon\n"
+"\n"
+"    Ĉiu arg estas komputenda aritmetika esprimo. La komputado uzas\n"
+"    fikslongajn entjerojn sen kontrolo pri trooj; tamen divido per 0\n"
+"    estas kaptata kaj raportata kiel eraro.  En la sekvanta listo da\n"
+"    operacioj la samprioritataj operacisimboloj aperas kune.  La\n"
+"    grupoj estas aran�itaj laŭ malkresko de ligforto.\n"
+"\n"
+"\tnomo++, nomo--\tpostkrementoj de variablo\n"
+"\t++nomo, --nomo\tantaÅ­krementoj de variablo\n"
+"\t-, +\t\tunulokaj minus, plus\n"
+"\t!, ~\t\tlogika kaj laÅ­bita negoj\n"
+"        **              potencigo\n"
+"\t*, /, %\t\tmultipliko, divido, resto\n"
+"\t+, -\t\tadicio, subtraho\n"
+"\t<<, >>\t\tlaŭbitaj �ovoj maldekstren kaj dekstren\n"
+"\t<=, >=, <, >\tkomparaj operacioj\n"
+"\t==, !=\t\tegalo, neegalo\n"
+"\t&\t\tlaÅ­bita KAJ\n"
+"\t^\t\tlaŭbita DISAŬ\n"
+"\t|\t\tlaŭbita AŬ\n"
+"\t&&\t\tlogika KAJ\n"
+"\t||\t\tlogika AŬ\n"
+"\tesprimo ? esprimo : esprimo\n"
+"\t\t\tkondiĉa esprimo\n"
+"\t=, *=, /=, %=,\n"
+"\t+=, -=, <<=, >>=,\n"
+"\t&=, ^=, |=\tvalorizoj\n"
+"\n"
+"    Åœelvariabloj uzeblas kiel operandoj.  En esprimo la nomon de\n"
+"    variablo anstataŭas �ia valoro (altipigita al fikslonga entjero).\n"
+"    Por tia uzo en esprimo variablo ne bezonas havi �altita sian\n"
+"    atributon „entjera‟.\n"
+"\n"
+"    La operacioj plenumi�as laŭ la ligforto de siaj operacisignoj.  La\n"
+"    enkrampigitaj subesprimoj plenumi�as unue, kaj tio ebligas\n"
+"    ĉirkaŭiri la supre priskribitajn regulojn pri la ligfortoj.\n"
+"\n"
+"    Elirstato:\n"
+"    Se la komputo de la lasta  ARG  donas  0,  la komando „let‟\n"
+"    liveras  1;  alie �i liveras  0."
+
+# read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars]
+#      [-p prompt] [-t timeout] [-u fd] [name ...]
+# read [-ers] [-a TABELO] [-d DISIG] [-i TEKSTO] [-n NSIGN] [-N NSIGN]
+#      [-p INVIT] [-t TLIM] [-u DN] [NOMO ...]
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"Legu linion el la ĉefenigujo kaj disigu �in en kampojn\n"
+"\n"
+"    Legu unu linion el la ĉefenigujo, aŭ el la dosiero indikita\n"
+"    per dosiernumero DN, se la opcio -u estas donita.  La linion\n"
+"    disigu en kampojn, kiel ĉe vortodisigo, kaj la unuan vorton ricevu\n"
+"    la unua argumento NOMO; la duan, la dua NOMO ktp; la lasta NOMO\n"
+"    ricevu ĉiujn restantajn vortojn.  Nur la signoj troveblaj en la\n"
+"    variablo $IFS rolas kiel vortodisigiloj.\n"
+"\n"
+"    Se nenia NOMO estas donita, konservu la legitan linion en la\n"
+"    variablo REPLY.\n"
+"\n"
+"    Opcioj:\n"
+"    -a TABELO\tla legatajn vortojn konservu en la sinsekvaj anoj de\n"
+"\t\tTABELO, komencante ekde la indico 0\n"
+"    -d DISIG\tlegu �is la unua signo de la disigilo DISIG (anstataŭ\n"
+"\t\tlegi �is linifino)\n"
+"    -e\t\tuzu Readline por akiri la linion\n"
+"    -i TEKSTO\tuzu TEKSTOn kiel komencan tekston por Readline\n"
+"    -n NSIGN\tĉesu leginte NSIGN da signoj (anstataŭ legi �is\n"
+"\t\tlinifino), krom se disigilo aperas pli frue\n"
+"    -N NSIGN\tlegu ekzakte NSIGN da signoj (tra ĉiuj disigiloj), krom\n"
+"                se la dosierfino aŭ la tempolimo atingi�os pli frue\n"
+"    -p INVIT\teligu la invitĉenon  INVIT  sen liniavanco antaŭ la\n"
+"\t\tatendata enigo\n"
+"    -r\t\tla deklivo „\\‟ estu ordinara signo (ne eskapsigno)\n"
+"    -s\t\tsilentigu la eĥon de la terminala enigo\n"
+"    -t TLIM\tla komando  read  ĉesi�u kun fiaska elirstato se\n"
+"\t\tkompleta linio da enigaĵo ne estas ricevita dum\t TLIM\n"
+"\t\tda sekundoj.  Se la variablo  TMOUT  havas valoron, ĉi\n"
+"\t\ttiu estas uzata kiel defaÅ­lta atendolimo.  TLIM povas\n"
+"\t\testi frakcio.  Se TLIM estas 0,\t read  tuj fini�as sen\n"
+"                provi ion legi, sed sukcesas nur se engaĵo pretas\n"
+"                ĉe la indikita dosiernumero.  La elirstato estas pli\n"
+"                granda ol 128 se la atendotempo estas atingita\n"
+"    -u DN\tlegu per la dosiernunero DN anstataŭ el la ĉefenigujo\n"
+"\n"
+"    Elirstato:\n"
+"    Ĝi estas 0, krom se renkonti�as dosierfino, aŭ atendolimo estas\n"
+"    atingita (tiuokaze �i superas 128), aŭ okazas valoriza eraro, aŭ\n"
+"    -u indikas nevalidan dosiernumeron."
+
+# return [n]
+# return [N]
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"Revenu el �elfunkcio\n"
+"\n"
+"    Igas la funkcion aŭ punkte vokitan („.‟, „source‟) skripton fini�i\n"
+"    kaj liveri la donitan valoron  N  kiel elirstaton.  Se  N  mankas,\n"
+"    la elirstato estas tiu de la ĵusa komando.\n"
+"\n"
+"    Elirstato:\n"
+"    N, aŭ malsukceso se la �elo ne plenumas �elfunkcion aŭ skripton."
+
+# set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]
+# set [-abefhkmnptuvxBCHP] [-o OPCINOMO] [--] [ARG ...]
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"Donu aŭ forprenu valorojn de �elvariabloj kaj numerparametroj.\n"
+"\n"
+"    Ŝan�u la valoron de �elatributoj kaj numerparametroj, aŭ vidigu la\n"
+"    nomojn kaj valorojn de �elvariabloj.\n"
+"\n"
+"    Opcioj:\n"
+"    -a\tMarku eksportendaj la variablojn �an�itajn aŭ kreitajn\n"
+"    -b\tTuj sciigu pri fini�o de fonaj laboroj\n"
+"    -e\tEliru tuj se ajna komando fini�is kun elirstato alia ol 0\n"
+"    -f\tMal�altu generadon de dosiernomoj (globbing)\n"
+"    -h\tRegistru en hakettabelo la situon de komandoj serĉataj\n"
+"    -k\tĈiujn valorizojn en ajna parto de komandolinio rigardu\n"
+"\tkiel valorizojn de �elvariabloj por la labormedio de la\n"
+"\tkomando, ne nur la valorizojn antaÅ­ la komandonomo\n"
+"    -m\tAktivigu la laborregadon\n"
+"    -n\tLegu la komandojn sen plenumi ilin\n"
+"    -o OPCINOMO\n"
+"\tAktivigu la variablon respondan al la OPCIONOMO:\n"
+"\t    allexport\tsamkiel -a\n"
+"\t    braceexpand\tsamkiel -B\n"
+"\t    emacs\tuzu emakseskan interfacon por liniredaktado\n"
+"\t    errexit\tsamkiel -e\n"
+"\t    errtrace\tsamkiel -E\n"
+"\t    functrace\tsamkiel -T\n"
+"\t    hashall\tsamkiel -h\n"
+"\t    histexpand\tsamkiel -H\n"
+"\t    history\tebligu komandohistorion\n"
+"\t    ignoreeof\tla �elo ne fini�u leginte dosierfinilon\n"
+"\t    interactive-comments\n"
+"\t\t\ttoleru komentojn en dialogaj komandoj\n"
+"\t    keyword\tsamkiel -k\n"
+"\t    monitor\tsamkiel -m\n"
+"\t    noclobber\tsamkiel -C\n"
+"\t    noexec\tsamkiel -n\n"
+"\t    noglob\tsamkiel -f\n"
+"\t    notify\tsamkiel -b\n"
+"\t    nounset\tsamkiel -u\n"
+"\t    onecmd\tsamkiel -t\n"
+"\t    physical\tsamkiel -P\n"
+"\t    pipefail\tla elirstato de dukto estu la elirstato\n"
+"\t\t\tde la lasta komando fini�inta nenule, aŭ\n"
+"\t\t\t0, se neniu komando alie fini�is\n"
+"\t    posix\t�an�u la konduton de Ba�o ĉie kie �ia defaŭlta\n"
+"\t\t\tfunkciado devias disde Pozikso, tiel ke �i\n"
+"\t\t\tkonformu al tiu normo\n"
+"\t    privileged\tsamkiel -p\n"
+"\t    verbose\tsamkiel -v\n"
+"\t    vi\t\tuzu vi-eskan interfacon por liniredaktado\n"
+"\t    xtrace\tsamkiel -x\n"
+"    -p\tPrivilegia re�imo, aktivi�as meme kiam la reala kaj efektiva\n"
+"\tidentoj de la uzanto malkongruas.  La dosiero $ENV ne estas\n"
+"\ttraktata, nek la �elfunkcioj, importataj el la medio.\n"
+"\tMalaktivigo de tiu opcio �an�as la efektivajn uid kaj gid\n"
+"\tlaÅ­ la realaj uid kaj gid\n"
+"    -t\tFinu la �elon leginte kaj plenuminte unu komandon\n"
+"    -u\tProvo anstataÅ­igi senvaloran variablon estu eraro\n"
+"    -v\tEligu la komandoliniojn legatajn\n"
+"    -x\tEligu la plenumotajn komandojn kaj iliajn argumentojn\n"
+"    -B\tLa �elo faru vinkulmalvolvon\n"
+"    -C\tSe aktiva, malebligu skribdifekti ekzistantajn ordinarajn\n"
+"\tdosierojn per alidirektado de la eligo\n"
+"    -E\tSe aktiva, la ERR-kaptilon (ERR trap) heredas la �elaj\n"
+"\tfunkcioj\n"
+"    -H\tEbligu atingi la historion !-stile. DefaÅ­lte la opcio estas\n"
+"\taktiva en la dialogaj �eloj.\n"
+"    -P\tLa simbolaj ligiloj estu travideblaj ĉe plenumo de komandoj\n"
+"\tkiuj �an�as la kurantan dosierujon („cd‟ ktp uzu «fizikan»\n"
+"\tinterpreton de vojnomo).\n"
+"    -T\tSe aktiva, la �elaj funkcioj heredas la kaptilojn (Traps)\n"
+"\tDEBUG kaj RETURN \n"
+"    --\tLa restantajn argumentojn uzu por valorizi la numerparametrojn.\n"
+"\tSe tiaj argumentoj mankas, malvalorizu la numerparametrojn.\n"
+"    -\tLa restantajn argumentojn uzu por valorizi la numerparametrojn.\n"
+"\tLa opcioj -x kaj -v malaktivi�as.\n"
+"\n"
+"    Uzante la signon + anstataŭ - vi povas mal�alti la opcion. La\n"
+"    opciojn ankaŭ eblas uzi ĉe la voko de la �elo. La kuranta aro da\n"
+"    aktivaj opcioj troveblas en $-.  La restantaj  n  argumentoj  ARG\n"
+"    i�as valoroj de la numervariabloj $1, $2 ... $n (en tiu ordo).\n"
+"    Senargumente, eligu ĉiujn �elvariablojn.\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, krom se renkonti�as misa opcio."
+
+# unset [-f] [-v] [name ...]
+# unset [-f] [-v] [NOMO ...]
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"Forvi�u valorojn kaj atributojn de �elaj funkcioj kaj variabloj\n"
+"\n"
+"    Por ĉiu NOMO, forvi�u la respondan variablon aŭ funkcion.\n"
+"\n"
+"    Opcioj:\n"
+"    -f\ttraktu ĉiun NOMOn kiel funkcion\n"
+"    -v  traktu ĉiun NOMOn kiel variablon\n"
+"    -n  traktu ĉiun NOMOn kiel nomreferencon, kaj senvalorigu �in mem\n"
+"        (kaj ne la referencatan variablon)\n"
+" \n"
+"    Se neniu el la du opcioj estas indikita, „unset‟ unue provos\n"
+"    forvi�i variablon, kaj se tia ne trovi�os, funkcion.\n"
+"\n"
+"    Iujn variablojn ne eblas forvi�i.  Vd ankaŭ la helpon pri „readonly‟.\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, krom se aperis misa opcio aÅ­ NOMO estas nurlega."
+
+# export [-fn] [name[=value] ...] or export -p
+# export [-fn] [NOMO[=VALORO] ...]  aÅ­  export -p
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Marku �elvariablojn kiel eksportajn\n"
+"\n"
+"    Marku la NOMOjn por aÅ­tomata eksporto en la medion de la\n"
+"    plenumotaj komandoj.  Se ĉeestas VALORO, uzu �in por valorizi\n"
+"    NOMOn antaÅ­ ol eksporti.\n"
+"\n"
+"    Opcioj:\n"
+"    -f\ttemas pri �elfunkcioj\n"
+"    -n\tforvi�u la eksportomarkon de la NOMOj\n"
+"    -p\teligu la liston de ĉiuj eksportaj variabloj kaj funkcioj\n"
+"\n"
+"    La opcio „--‟ ĉesigas pluan opcitraktadon.\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, krom se aperis nevalida NOMO aÅ­ misa opcio."
+
+# readonly [-aAf] [name[=value] ...] or readonly -p
+# readonly [-aAf] [NOMO[=VALORO] ...]  aÅ­  readonly -p
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Faru �elvariablojn ne�an�eblaj\n"
+"\n"
+"    La donitaj NOMOj  i�as nurlegaj kaj la valorojn de tiuj nomoj\n"
+"    ne povas �an�i posta valorizo.  Se ĉeestas VALORO, uzu �in por\n"
+"    valorizi la NOMOn antaŭ ol fari �in nurlega.\n"
+"\n"
+"    Opcioj:\n"
+"    -a\ttemas pri entjerindica tabelo indikita per plursignifa NOMO\n"
+"    -A\ttemas pri la asocitabela signifo de plursignifa NOMO\n"
+"    -f\ttemas pri la �elfunkcia signifo de plursignifa NOMO\n"
+"    -p\teligu ĉiujn nurlegajn variablojn aŭ funkciojn, depende je\n"
+"        tio, ĉu la opcio „-f“ estas aldonita\n"
+"\n"
+"    La opcio „--‟ ĉesigas pluan opcitraktadon.\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, krom se aperas nevalida nomo aÅ­ misa opcio."
+
+# shift [n]
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"Åœovu numerparametrojn\n"
+"\n"
+"    La numerparametrojn  $N+1, $N+2 ...  renumeru al  $1, $2 ...\n"
+"    Se  N  ne estas indikita, uzu  1  anstataÅ­e."
+
+# source filename [arguments]
+# source DOSIERNOMO [ARGUMENTOJ]
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Plenumu komandojn el dosiero en la kuranta �elo\n"
+"\n"
+"    Legu kaj plenumu la komandojn el DOSIERNOMO en la kuranta �elo.\n"
+"    Uzu la vojojn el la variablo  $PATH  por trovi la dosierujon de\n"
+"    DOSIERNOMO.  La eventualaj ARGUMENTOJ i�as la numerparametroj por\n"
+"    plenumo de DOSIERNOMO.\n"
+"\n"
+"    Elirstato:\n"
+"    Tiu de la komando laste plenumita en DOSIERNOMO; malsukceso, se\n"
+"    DOSIERNOMO ne legeblas."
+
+# suspend [-f]
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Haltetigu la plenumon de la �elo\n"
+"\n"
+"    Haltetigu la plenumon de la �elo �is �i ricevos la signalon SIGCONT.\n"
+"    Krom se per superforto, salutan �elon ne eblas haltetigi.\n"
+"\n"
+"    Opcio:\n"
+"    -f\tSuperforte haltetu, eĉ se la �elo estas saluta �elo\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, krom se laborregado estas mal�altita aŭ okazis eraro."
+
+# test [expr]
+# test [ESPRIMO]
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"Komputu kondiĉan esprimon\n"
+"\n"
+"    Liveru elirstaton 0 (vera) aÅ­ 1 (malvera) laÅ­ la rezulto de\n"
+"    komputado de la ESPRIMO.  La esprimoj povas esti unulokaj aÅ­\n"
+"    dulokaj.  La unulokaj plejparte servas por determini la statuson\n"
+"    de dosiero.  Krome, estas operacioj super ĉenoj kaj la\n"
+"    nombrokomparaj operacioj.\n"
+"\n"
+"    La konduto de test-komando dependas je la kiomo de �iaj argumentoj.\n"
+"    Plenan priskribon donas «man bash».\n"
+"\n"
+"    Operacioj super dosieroj:\n"
+"\n"
+"\t-a DOSIERO\tVera se DOSIERO ekzistas\n"
+"\t-b DOSIERO\tVera se DOSIERO estas por bloka eneligo\n"
+"\t-c DOSIERO\tVera se DOSIERO estas por bajta eneligo\n"
+"\t-d DOSIERO\tVera se DOSIERO estas dosierujo\n"
+"\t-e DOSIERO\tVera se DOSIERO ekzistas\n"
+"\t-f DOSIERO\tVera se DOSIERO ekzistas kaj estas ordinara\n"
+"\t-g DOSIERO\tVera se DOSIERO havas set-group-id = 1\n"
+"\t-h DOSIERO\tVera se DOSIERO estas simbola ligilo\n"
+"\t-L DOSIERO\tVera se DOSIERO estas simbola ligilo\n"
+"\t-k DOSIERO\tVera se la DOSIERO havas sticky = 1\n"
+"\t-p DOSIERO\tVera se DOSIERO estas nomhava dukto\n"
+"\t-r DOSIERO\tVera se vi rajtas legi DOSIEROn\n"
+"\t-s DOSIERO\tVera se DOSIERO ekzistas kaj longas pli ol 0\n"
+"\t-S DOSIERO\tVera se DOSIERO estas kontaktingo („socket‟)\n"
+"\t-t DNUMERO\tVera se la dosiero DNUMERO estas terminala\n"
+"\t-u DOSIERO\tVera se DOSIERO havas set-user-id = 1\n"
+"\t-w DOSIERO\tVera se vi rajtas skribi en DOSIEROn\n"
+"\t-x DOSIERO\tVera se vi rajtas lanĉi DOSIEROn\n"
+"\t-O DOSIERO\tVera se DOSIERO estas via dosiero\n"
+"\t-G DOSIERO\tVera se DOSIERO apartenas al via grupo\n"
+"\t-N DOSIERO\tVera se DOSIERO �an�i�is post la lasta lego\n"
+"\n"
+"\tD_RO1 -nt D_RO2\tVera se la dosiero D_RO1 estas pli fre�a\n"
+"\t\t\t(laŭ la �an�odato) ol la dosiero D_RO2\n"
+"\tD_RO1 -ot D_RO2\tVera se D_RO1 estas malpli fre�as ol D_RO2\n"
+"\tD_RO1 -ef D_RO2\tVera se D_RO1 estas rekta ligilo al D_RO2\n"
+"\n"
+"    Operacioj super ĉenoj:\n"
+"\n"
+"\t-z ĈENO\t\tVera se ĈENO estas vakua\n"
+"\t-n ĈENO\t\tVera se ĈENO ne estas vakua\n"
+"\tĈENO\t\tVera se ĈENO ne estas vakua\n"
+"\tĈENO1 = ĈENO2\tVera se la ĉenoj estas egalaj\n"
+"\tĈENO1 != ĈENO2\tVera se la ĉenoj ne estas egalaj\n"
+"\tĈENO1 < ĈENO2\tVera se ĈENO1 leksikografie antaŭas la\n"
+"\t\t\tĉenon ĈENO2\n"
+"\tĈENO1 > ĈENO2\tVera se ĈENO1 leksikografie sekvas la\n"
+"\t\t\tĉenon ĈENO2\n"
+"\n"
+"    Diversaj operacioj:\n"
+"\n"
+"        -o OPCIO        Vera se la �elopcio OPCIO estas �altita\n"
+"        -v VAR          Vera se la �elvariablo VAR havas valoron\n"
+"        -R VAR          Vera se la �elvariablo VAR havas valoron kaj\n"
+"                        estas nomreferenco\n"
+"\t! ESPR\t\tVera se la esprimo ESPR estas malvera\n"
+"\tESPR1 -a ESPR2\tVera se ambaÅ­ esprimoj estas veraj\n"
+"\tESPR1 -o ESPR2\tVera se ajna el la esprimoj estas vera\n"
+"\n"
+"\targ1 KP arg2\tAritmetikaj komparoj.  KP estas iu el la\n"
+"\t\t\trilatoj -eq, -ne, -lt, -le, -gt, -ge\n"
+"\n"
+"    La aritmetikaj komparoj liveras veron se arg1 estas respektive\n"
+"    egala, neegala, malplia ol, malplia aÅ­ egala al, plia ol,\n"
+"    plia aÅ­ egala al arg2.\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, se la rezulto de la komputo de ESPRIMO estas vero;\n"
+"    malsukceso, se la rezulto estas malvero aŭ renkonti�as misa\n"
+"    argumento."
+
+# [ arg... ]
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Ĉi tiu estas sinonimo de la primitivo „test‟; tamen la lasta\n"
+"    argumento devas esti „]‟ fermanta la esprimon komencitan per „[‟."
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Vidigu proceztempojn\n"
+"\n"
+"    Eligu la tempojn akumulitajn de la uzanto kaj de la kerno\n"
+"    por la �elo kaj �iaj procezidoj.\n"
+"\n"
+"    Elirstato:\n"
+"    Ĉiam sukcesa."
+
+# trap [-lp] [[arg] signal_spec ...]
+# trap [-lp] [[ARG] SIGNALINDIKO ...]
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"Kaptu signalojn kaj aliajn eventojn\n"
+"\n"
+"    Difinu kaj aktivigu traktilojn plenumotajn kiam �elo ricevos\n"
+"    signalojn aŭ ĉe aliaj kondiĉoj.\n"
+"\n"
+"    La komando ARG estas legota kaj plenumota kiam la �elo ricevos\n"
+"    signalon el SIGNALINDIKO.  Se ARG malestas (kaj SIGNALINDIKO\n"
+"    konsistas el unu sola signalo) aŭ estas „-‟, ĉiuj indikitaj\n"
+"    signaloj rericevas sian komencan valoron.  Se ARG estas vakua\n"
+"    ĉeno, la �elo mem kaj komandoj el �i vokitaj malatentos ĉiujn\n"
+"    signalojn de SIGNALINDIKO.\n"
+"\n"
+"    Se inter la signaloj SIGNALINDIKO estas „EXIT‟ (aŭ 0), tiam ARG de\n"
+"    la komando plenumi�os ĉe la eliro el la �elo. Se en SIGNALINDIKO\n"
+"    estas „DEBUG‟, ARG plenumi�os post ĉiu komando.  Se en\n"
+"    SIGNALINDIKO estas „RETURN“, ARG plenumi�os ĉiufoje kiam fini�as\n"
+"    skripto rulata per komando „.“ aŭ „source“.  La SIGNALINDIKO „ERR“\n"
+"    igas ARGon plenumi�i ĉiufoje kiam malsukceso de komando kaŭzus\n"
+"    eliron el la �elo havanta la opcion „-e“ �altita.\n"
+"\n"
+"    Senargumente trap listigas komandojn plenumotajn laŭ ĉiu signalo.\n"
+"\n"
+"    Opcioj:\n"
+"    -l\tlistigu la signalnomojn kun la numeroj\n"
+"    -p  vidigu la trap-komandojn por trakti ĉiun SIGNALINDIKOn\n"
+"\n"
+"    Ĉiu SIGNALINDIKO estas aŭ signalnomo el <signal.h>, aŭ\n"
+"    signalnumero.  La signalnomoj estas usklecoblindaj, kaj la\n"
+"    prefikso „SIG‟ estas ellasebla.  Signalon S oni povas sendi al la\n"
+"    �elo per la komando «kill -S $$».\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, kondiĉe ke SIGNALINDIKOj kaj la opcioj estas taŭgaj."
+
+# type [-afptP] name [name ...]
+# type [-afptP] NOMO [NOMO ...]
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"Vidigu informon pri tipo de komando\n"
+"\n"
+"    Por ĉiu NOMO, montru kion �i signifus en la pozicio de\n"
+"    komadonomo.\n"
+"\n"
+"    Opcioj:\n"
+"    -a\tlistigu ĉiujn lokojn entenantajn plenumeblan dosieron\n"
+"        kun koncerna NOMO;  la listo inkludas alinomojn kaj\n"
+"        funkciojn, se kaj nur se malestas la opcio  „-p‟\n"
+"    -f  ekskludas el la serĉo la �elfunkciojn\n"
+"    -P\tapliku vojserĉon laŭ PATH por ĉiu NOMO, eĉ se ekzistas tianoma\n"
+"        funkcio, primitiva komando aÅ­ alinomo, kaj liveru la nomon de\n"
+"        tiel plenumebla diskdosiero\n"
+"    -p\teligu la nomon de dosiero kiu i�us plenumata;\n"
+"        aŭ nenion, se «type -t name» ne eligus „file‟\n"
+"    -t\teligu unu vorton, iun el la sekvaj:\n"
+"        „alias‟, „keyword‟, „function‟, „builtin‟, „file‟ aŭ „‟ --\n"
+"        se NOMO  estas, respektive, alinomo, �ela �losilvorto,\n"
+"        �elfunkcio, �ela primitivo, dosiero aŭ nenio konata\n"
+"\n"
+"    Argumentoj:\n"
+"    NOMO  Esplorenda komandonomo\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, se ĉiujn NOMOjn prosperis trovi; malsukceso, se estis\n"
+"    netrovitaj."
+
+# ulimit [-SHacdefilmnpqrstuvx] [limit]
+# ulimit [-SHacdefilmnpqrstuvx] [LIMO]
+#: builtins.c:1431
+#, fuzzy
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Ŝan�u risurcolimaĵojn de la �elo.\n"
+"\n"
+"    La komando „ulimit‟ ebligas mastrumi la risurcojn disponeblajn al\n"
+"    la procezoj lanĉataj el la �elo (se la operaciumo ebligas tion).\n"
+"\n"
+"    Opcioj:\n"
+"    -S  �an�ebla („soft‟) limo\n"
+"    -H  firma („hard‟) limo\n"
+"    -a  eligu ĉiujn kurantajn risurcolimaĵojn\n"
+"    -b  la kontaktoskatola bufrolongo\n"
+"    -c  maksimuma longo de nekropsia dosiero („core‟)\n"
+"    -d  maksimuma longo de datumsegmento de procezo\n"
+"    -e  maksimuma viciga prioritato („nice‟)\n"
+"    -f  maksimuma longo de dosieroj skribataj de la �elo kaj �iaj idoj\n"
+"    -i  maksimuma longo de pendaj signaloj\n"
+"    -k  maksimuma nombro de kernaj atendovicoj (kqueues) disponigeblaj\n"
+"        al la procezo \n"
+"    -l  maksimuma longo de �losebla procezmemoro (mlock)\n"
+"    -m  maksimuma longo de rezida procezmemoro\n"
+"    -n  maksimuma nombro de malfermitaj dosiernumeroj\n"
+"    -p  longo de dukta bufro (pipe)\n"
+"    -q  maksimuma nombro da bajtoj en atendovicoj de Poziksaj mesa�oj\n"
+"    -r  maksimuma prioritato realtempa\n"
+"    -s  maksimuma longo de stako\n"
+"    -t  maksimuma tempo ĉefprocesora (en sekundoj)\n"
+"    -u  maksimuma nombro de procezoj de la uzanto\n"
+"    -v  longo de la virtuala memoro\n"
+"    -x  maksimuma nombro de dosier�losoj\n"
+"    -P  maksimuma nombro de pseÅ­doterminaloj\n"
+"    -T  maksimuma nombro de fadenoj\n"
+"\n"
+"    Ne ĉiuj opcioj disponeblas sur ĉiuj komputilaj platformoj.\n"
+"\n"
+"    Se LIMO estas indikita, �ia valoro limigas la koncernan risurcon;\n"
+"    la specialaj vortoj por LIMO: „soft‟, „hard‟, „unlimited‟\n"
+"    signifas, respektive: «la kuranta �an�ebla limo», «la kuranta\n"
+"    firma limo», «sen limo».  Alie estas eligata la kuranta valoro de\n"
+"    la koncerna risurco.  Manko de opcioj implicas -f.\n"
+"\n"
+"    La valoroj estas en obloj de 1024 bajtoj, krom por la opcio -t,\n"
+"    kiu estas en sekundoj; por -p, kiu estas en obloj de 512 bajtoj;\n"
+"    kaj por -u, kiu estas sendimensia nombro de procezoj.\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, kondiĉe ke la opcioj estas taŭgaj kaj ne okazis eraro."
+
+# umask [-p] [-S] [mode]
+# umask [-p] [-S] [REÄœIMO]
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"Vidigu aŭ agordu dosierre�iman maskon\n"
+"\n"
+"    La dosierkrea masko de la uzanto havu la valoron de la argumento\n"
+"    REÄœIMO.  Se REÄœIMO mankas, eligu la kurantan valoron de la masko.\n"
+"\n"
+"    Se la argumento REĜIMO komenci�as per cifero, �i estas\n"
+"    interpretata kiel okuma nombro; alie, kiel simbola signoĉeno\n"
+"    laÅ­ chmod(1).\n"
+"\n"
+"    Opcioj:\n"
+"    -p\tse REĜIMO malestas, la eligaĵo havu formon taŭgan por enigo\n"
+"    -S\tla eligo estu simbola; alie �i estas okuma nombro\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, krom se REÄœIMO estas nevalida aÅ­ aperas misa opcio."
+
+# wait [-fn] [id ...]
+# wait [-fn] [IND ...]
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"Atendu ke laboroj fini�u, kaj liveru elirstaton.\n"
+"\n"
+"    Atendu fini�on de ĉiu procezo indikita per IND (kiu povas esti\n"
+"    proceznumero aŭ laborindiko) kaj liveru �ian elirstaton.  Se IND\n"
+"    malestas, atendu ĉiujn aktivajn procezidojn, kaj liveru la \n"
+"    elirstaton 0.  Se IND estas laborindiko, atendu ĉiujn procezojn en\n"
+"    la dukto de la laboro.\n"
+"\n"
+"    Kun la opcio „-n“: atendu fini�on de la sekva laboro kaj liveru\n"
+"    �ian elirstaton.\n"
+"\n"
+"    Kun la opcio „-f“: se la laborregado estas �altita, atendu fini�on\n"
+"    de la donita IND (anstataŭ atendi ke �i �an�u la staton)\n"
+"\n"
+"    Elirstato:\n"
+"    Tiu de la lasta IND; malsukceso, se IND estas nevalida aÅ­ se\n"
+"    renkonti�as nevalida opcio.<"
+
+# wait [pid ...]
+# wait [PN ...]
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"Atendu ke procezoj fini�u, kaj liveru elirstaton\n"
+"\n"
+"    Atendu fini�on de ĉiu indikita procezoj kaj liveru �ian elirstaton.\n"
+"    Se PN malestas, atendu ĉiujn aktivajn procezidojn, kaj liveru la\n"
+"    elirstaton 0.  PN  devas esti proceznumero.\n"
+"\n"
+"    Elirstato:\n"
+"    Tiu de la lasta PN; malsukceso, se PN estas nevalida aÅ­ se\n"
+"    renkonti�as nevalida opcio."
+
+# for NAME [in WORDS ... ] ; do COMMANDS; done
+# for NOMO [in VORTOJ ... ] ; do KOMANDOJ; done
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Plenumu komandojn por ĉiu ero de listo\n"
+"\n"
+"    La iteracio „for‟ plenumas la KOMANDOJn por ĉiu ero de sia listo.\n"
+"    Se la parto «in VORTOJ ...;» malestas, «in \"$@\"» estas uzata\n"
+"    anstataŭe.  Por ĉiu el la VORTOJ, la NOMO estas valorizata per tiu\n"
+"    ero kaj la KOMANDOJ estas plenumataj.\n"
+"\n"
+"    Elirstato:\n"
+"    Tiu de la laste plenumita komando."
+
+# for (( exp1; exp2; exp3 )); do COMMANDS; done
+# for (( ESPR1; ESPR2; ESPR3 )); do KOMANDOJ; done
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Aritmetika iteracio\n"
+"\n"
+"    Ekvivalentas al\n"
+"\t(( ESPR1 ))\n"
+"\twhile (( ESPR2 )); do\n"
+"\t   KOMANDOJ\n"
+"\t   (( ESPR3 ))\n"
+"\tdone\n"
+"    kie ESPR1, ESPR2 kaj ESPR3 estas aritmetikaj esprimoj.  Se iu el\n"
+"    ili malestas, 1 estas uzata anstataÅ­e.\n"
+"\n"
+"    Elirstato:\n"
+"    Tiu de la laste plenumita komando."
+
+# select NAME [in WORDS ... ;] do COMMANDS; done
+# select NONO [in VORTOJ ... ;] do KOMANDOJ; done
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Elektu vortojn el listo kaj plenumu komandojn\n"
+"\n"
+"    Malvolvu VORTOJn, generante liston da vortoj.  Tiujn vortojn eligu\n"
+"    en la ĉeferarujon, ĉiu antaŭate de sia numero.  Se „in VORTOJ‟\n"
+"    malestas, prenu anstataÅ­e la enhavon de \"$@\".  Poste eligu la\n"
+"    inviton laŭ la variablo PS3 kaj legu linion el la ĉefenigujo.  Se\n"
+"    la linio konsistas el numero responda al iu el la vortoj eligitaj,\n"
+"    la NOMO ricevu �in kiel sian valoron.  Se la linio entenas nenion,\n"
+"    ripetu VORTOJn kaj la inviton.  Ĉe la dosierfino la komando\n"
+"    fini�as.  Ajna alia enigaĵo vakuigas la variablon NOMO.  La legita\n"
+"    linio konservi�as en la variablo REPLY.  Plenumu la KOMANDOJn post\n"
+"    ĉiu elekto, �is renkonti�os komando de eliro (break).\n"
+"\n"
+"    Elirstato:\n"
+"    Tiu de la laste plenumita komando."
+
+# time [-p] PIPELINE
+# time [-p] DUKTO
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"Raportu tempon konsumitan de dukto\n"
+"\n"
+"    Plenumu la DUKTOn kaj poste eligu tabelon el la reala tempo,\n"
+"    la ĉefprocesora tempo de la uzanto, kaj la ĉefprocesora tempo\n"
+"    sistema, konsumitaj por plenumi la DUKTOn, kiam �i fin�os.\n"
+"\n"
+"    Opcio:\n"
+"    -p\tprezentu la tempojn laÅ­ la portebla Poziksa formo\n"
+"\n"
+"    La variablo TIMEFORMAT difinas la formon de la eligaĵo.\n"
+"\n"
+"    Elirstato:\n"
+"    Tiu de la DUKTO."
+
+# case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac
+# case VORTO in [ÅœABLONO [| ÅœABLONO]...) KOMANDOJ ;;]... esac
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Plenumu komandojn laŭ �ablonkongruo \n"
+"\n"
+"    Plenumu KOMANDOJn kondiĉe ke VORTO kongruas kun ŜABLONO.\n"
+"    La streko „|‟ servas por disigi �ablonojn (se pluraj).\n"
+"\n"
+"    Elirstato:\n"
+"    Tiu de la komando laste plenumita."
+
+# if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]...
+# [ else COMMANDS; ] fi
+# if KOMANDOJ; then KOMANDOJ;[ elif KOMANDOJ; then KOMANDOJ; ]...
+# [ else KOMANDOJ; ] fi
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Plenumu komandojn depende je kondiĉo\n"
+"\n"
+"    Plenumu la komandojn el «if KOMANDOJ». Se la elirstato estas 0,\n"
+"    tiam plenumu la komandojn el «then KOMANDOJ». Alie, laŭvice,\n"
+"    plenumu la komandoj el «elif KOMANDOJ», kaj se la elirstato\n"
+"    estas 0, plenumu la komandojn de ties «then KOMANDOJ», post kio\n"
+"    la komando „if‟ fini�as.  Alie plenumu la komandojn el\n"
+"    «else KOMANDOJ» (se tiaj enestas).  La elirstato estas tiu de la\n"
+"    lasta komando plenumita, aŭ 0 se neniu el la kondiĉoj estis vera."
+
+# while COMMANDS; do COMMANDS; done
+# while KOMANDOJ; do KOMANDOJ; done
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Plenumadu komandojn dum testo sukcesas\n"
+"\n"
+"    Ripete malvolvu kaj plenumu la KOMANDOJn dum la lasta el la\n"
+"    KOMANDOJ de la „while‟-parto liveras elirstaton 0.\n"
+"\n"
+"    Elirstato:\n"
+"    Tiu de la komando laste plenumita. "
+
+# until COMMANDS; do COMMANDS; done
+# until KOMANDOJ; do KOMANDOJ; done
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Plenumadu komandojn �is kiam testo sukcesos\n"
+"\n"
+"    Ripete malvolvu kaj plenumu la komandojn dum la lasta el la\n"
+"    KOMANDOJ de la „until‟-parto liveras elirstaton alian ol 0.\n"
+"\n"
+"    Elirstato:\n"
+"    Tiu de la komando laste plenumita."
+
+# coproc [NAME] command [redirections]
+# coproc [NOMO] KOMANDO [ALIDIREKTADOJ]
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"Kreu kunprocezon nomotan NOMO\n"
+"\n"
+"    Plenumu KOMANDOn nesinkrone, konektinte per dukto �iajn ĉefelgujon\n"
+"    kaj ĉefengujon al la dosiernumeroj listigitaj en la tabelo NOMO de\n"
+"    la kuranta �elo ĉe la indicoj 0 kaj 1.  La defaŭlta NOMO estas\n"
+"    „COPROC‟.\n"
+"\n"
+"    Elirstato:\n"
+"    La komando  coproc  liveras la elirstaton 0."
+
+# function name { COMMANDS ; } or name () { COMMANDS ; }
+# function NOMO { KOMANDOJ ; }  aÅ­  NOMO () { KOMANDOJ ; }
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"Difinu �elfunkcion\n"
+"\n"
+"    Kreu �elfunkcion kun NOMO.  Vokite kiel simpla komando,  NOMO\n"
+"    plenumas la KOMANDOJn en la medio de la vokanta �elo.  Ĉe voko de\n"
+"    NOMO la komandoliniajn argumentojn la funkcio ricevas en  $0...$n,\n"
+"    kaj la funkcinomo registri�as en  $FUNCNAME.\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, krom se NOMO estas nurlega."
+
+# grouping_braces: { COMMANDS ; }
+# { KOMANDOJ ; }
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Arigu komandojn en komandan unuon\n"
+"\n"
+"    Plenumu la komandojn grupe.  Tiel eblas apliki alidirektadon al\n"
+"    tuta grupo da komandoj.\n"
+"\n"
+"    Elirstato:\n"
+"    Tiu de la komando laste plenumita."
+
+# job_spec [&]
+# LABORINDIKO [&]
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"Reaktivigu laboron en la fono\n"
+"\n"
+"    Samkiel la argumento LABORINDIKO en komando „fg‟.  Reaktivigu\n"
+"    haltigitan aÅ­ fonan laboron.  LABORINDIKO povas esti labornomo aÅ­\n"
+"    labornumero.  Postmetita „&‟ sendas la laboron en la fonon,\n"
+"    samkiel se la komando „bg‟ estus aplikita al LABORINDIKO.\n"
+"\n"
+"    Elirstato:\n"
+"    Tiu de la reakivigita laboro."
+
+# (( expression ))
+# (( ESPRIMO ))
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Komputu aritmetikan esprimon\n"
+"\n"
+"    La esprimo EXPRESSION komputi�as laŭ la aritmetikaj reguloj.\n"
+"    Ekvivalentas al «let EXPRESSION».\n"
+"\n"
+"    Elirstato:\n"
+"    1, se la rezulto de la ESPRIMO estas 0; 0 aliokaze."
+
+# [[ expression ]]
+# [[ ESPRIMO ]]
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"Plenumu kondiĉkomandon\n"
+"\n"
+"    Liveras elirstaton 0 aŭ 1 laŭ la rezulto de komputado de kondiĉa\n"
+"    ESPRIMO.  Esprimoj konsistas el bazaj esprimoj, kiajn uzas la\n"
+"    primitivaĵo „test‟, kaj komponi�as per sekvaj operacioj:\n"
+"\n"
+"      ( ESPRIMO )   Liveras la valoron de ESPRIMO\n"
+"      ! ESPRIMO\t    Vera, se ESPRIMO estas malvera; alie malvera\n"
+"      ESP1 && ESP2  Vera, se veras ambaÅ­ ESP1 kaj ESP2; alie malvera\n"
+"      ESP1 || ESP2  Vera, se veras ajna el ESP1 kaj ESP2; alie malvera\n"
+"\n"
+"    En la operacioj „==‟ kaj „!=‟ la signoĉeno dekstre de la operacisigno\n"
+"    rolas kiel �ablono, kongrueco al kiu estas testata.  Ĉe la\n"
+"    operacio „=~‟ la ĉeno en la dekstra parto rolas kiel regulesprimo\n"
+"    por kongruectestado.\n"
+"\n"
+"    En la operacioj && kaj || la duaj subesprimoj ESP2 ne estas\n"
+"    komputataj se ESP1 jam sufiĉas por determini la rezulton.\n"
+"\n"
+"    Elirstato:\n"
+"    0 aÅ­ 1, laÅ­ la valoro de ESPRIMO."
+
+# help var
+# variables - Names and meanings of some shell variables
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"Nomoj kaj uzoj de komunaj �elvariabloj\n"
+"\n"
+"    BASH_VERSION Informo pri la versio de ĉi tiu Ba�o\n"
+"    CDPATH\tListo da dosierujoj (disigitaj per dupunkto) en\n"
+"\t\tkiuj argumenta dosierujo de „cd‟ estu serĉata\n"
+"    GLOBIGNORE\tListo da �ablonoj (disigitaj per dupunkto) difinanta\n"
+"\t\tdosiernomojn ignorendajn ĉe malvolvo de dosierindikoj\n"
+"    HISTFILE\tNomo de la dosiero por via komandohistorio\n"
+"    HISTFILESIZE  Maksimuma nombro de linioj konserveblaj en HISTFILE\n"
+"    HISTSIZE\tMaksimuma nombro de linioj el komandohistorio\n"
+"\t\tatingeblaj el plenumata �elo\n"
+"    HOME\tPlena dosierindiko pri via hejma dosierujo\n"
+"    HOSTNAME\tNomo de la rulanta komputilo\n"
+"    HOSTTYPE\tTipo de la ĉefprocesoro rulanta ĉi tiun Ba�on\n"
+"    IGNOREEOF\tDeterminas la konduton de la �elo kiam �i ricevas\n"
+"\t\tdosierfinilon (^D, \\004) kiel nuran enigaĵon.  Se �i\n"
+"\t\tekzistas kaj havas nombran valoron, tiam ĉi tiu\n"
+"                indikas, kiom da sinsekvaj dosierfinilojn toleri\n"
+"\t\tantaŭ ol la �elo fini�u (defaŭlte, 10).  Sen tia\n"
+"\t\tvaloro,  ^D  signifas finon de enigo\n"
+"    MACHTYPE\tSignoĉeno priskribanta la komputsistemon rulantan\n"
+"\t\tĉi tiun Ba�on\n"
+"    MAILCHECK\tKiom ofte (post kiom da sekundoj) Ba�o kontrolu\n"
+"\t\tricevon de nova retpo�ta mesa�o\n"
+"    MAILPATH\tListo da dosiernomoj (disigitaj per dupunkto) kiujn\n"
+"\t\tBa�o testu pri nova retpo�taĵo\n"
+"    OSTYPE\tVersio de Unikso sur kiu ĉi tiu Ba�o ruli�as\n"
+"    PATH\tListo da dosierujoj (disigitaj per dupunkto) kie serĉi\n"
+"\t\tkomandojn\n"
+"    PROMPT_COMMAND  Komando plenumenda antaŭ ĉiu unuaranga invito\n"
+"    PS1\t\tSignoĉeno de la unuaranga invito\n"
+"    PS2\t\tSignoĉeno de la duaranga invito\n"
+"    PWD\t\tPlena dosierindiko de la kuranta dosierujo\n"
+"    SHELLOPTS\tListo da aktivaj �elaj opcioj (disigitaj per dupunktoj)\n"
+"    TERM\tTipo de la uzata terminalo\n"
+"    TIMEFORMAT\tFormato por eligi tempostatistikon per la komando „time‟\n"
+"    auto_resume\tSe ne vakua, indikas ke komandan vorton sole aperanta\n"
+"\t\ten linio la �elo unue serĉu en la listo de haltetintaj\n"
+"\t\tlaboroj. Se trovita tie, la laboro i�u dialoga.\n"
+"\t\tLa valoro „exact‟ postulas ekzaktan kongruon de la\n"
+"\t\tkomanda vorto kun la komando el la laborlisto. La valoro\n"
+"\t\t„substring‟ indikas ke la komanda vorto kongruu kun\n"
+"\t\tsubĉeno de la laboro. Ĉia alia valoro indikas ke la\n"
+"\t\tkomando estu komenca parto de la labornomo\n"
+"    histchars\tSignoj regantaj reuzon de komandohistorio kaj rapidan\n"
+"\t\tanstataŭigon. Unue estas la reuziga signo, kutime „!‟.\n"
+"\t\tDue estas la signo de „rapida anstataŭigo‟, kutime „^‟.\n"
+"\t\tTrie estas la signo de „historia komentilo‟,\n"
+"\t\tkutime „#‟\n"
+"    HISTIGNORE\tListo da �ablonoj (disigitaj per dupunkto) difinanta\n"
+"\t\tkiujn komandojn konservi en la historilisto\n"
+
+# pushd [-n] [+N | -N | dir]
+# pushd [-n] [+N | -N | DOSIERUJO]
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Surstakigu dosierujojn\n"
+"\n"
+"    Surstakigu dosierujon sur la stakon da dosierujoj, aŭ cikle �ovu\n"
+"    la stakon tiel, ke la nova stakpinto estu la kuranta dosierujo.\n"
+"    Senargumente, permutu la du plej suprajn dosierujojn de la stako.\n"
+"\n"
+"    Opcio:\n"
+"    -n\tNe �an�u la kurantan dosierujon (ne plenumu cd) surstakigante\n"
+"        dosierujon sur la stakon; do, nur la stakon �an�u\n"
+"\n"
+"    Argumentoj:\n"
+"    +N\tCikle �ovu la stakon tiel ke la Nª dosierujo (nombrante de\n"
+"    \tmaldekstre en la listo eligebla per „dirs‟, numerante de 0)\n"
+"        i�u la pinta\n"
+"\n"
+"    -N\tCikle �ovu la stakon tiel ke la Nª dosierujo (nombrante de\n"
+"    \tdekstre en la listo eligebla per „dirs‟, numerante de 0) i�u\n"
+"        la pinta\n"
+"\n"
+"    DOSIERUJO\n"
+"\tsurstakigu la DOSIERUJOn kaj faru �in la nova kuranta\n"
+"    \tdosierujo labora\n"
+"\n"
+"    Vi povas vidigi la stakon da dosierujoj per la komando „dirs‟.\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, krom se aperas misa argumento aÅ­ se cd malsukcesas."
+
+# popd [-n] [+N | -N]
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Elstakigu dosierujojn\n"
+"\n"
+"    Elstakigu erojn el la stako da dosierujoj.  Senargumente, forigu\n"
+"    la pintan dosierujon kaj iru (cd) en la novan pintan dosierujon.\n"
+"\n"
+"    Opcio:\n"
+"    -n\tNe �an�u (cd) la kurantan dosierujon demetante dosierujon el\n"
+"        la stako; do, nur la stakon �an�u\n"
+"\n"
+"    Argumentoj:\n"
+"    +N\tForigu la N-an eron de maldekstre de la listo eligebla per\n"
+"\t„dirs‟, numerante ekde 0.  Ekz-e: «popd +0» forigas la plej\n"
+"\tmaldekstran dosierujon; «popd +1», �ian najbaron\n"
+"\n"
+"    -N\tForigu la N-an eron de dekstre de la listo eligebla per\n"
+"        „dirs‟, numerante ekde 0.  Ekz-e: «popd -0» forigas la lastan\n"
+"\tdosierujon; «popd -1», la antaŭlastan\n"
+"\n"
+"    Vi povas vidigi la stakon da dosierujoj per la komando „dirs‟.\n"
+"    Elirstato:\n"
+"    Sukceso, krom se aperas misa argumento aÅ­ se cd malsukcesas."
+
+# dirs [-clpv] [+N] [-N]
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Listigu dosierujstakon\n"
+"\n"
+"    Listigu la kurantan dosierujstakon. La dosierujoj trafas en la\n"
+"    stakon per la komando „pushd‟ kaj estas forigeblaj per la komando\n"
+"    „popd‟.\n"
+"\n"
+"    Opcioj:\n"
+"    -c  vi�u la dosierujstakon forigante el �i ĉiujn erojn\n"
+"    -l  ne uzu mallongan formon de dosierujnomoj relative al via hejma\n"
+"        dosierujo\n"
+"    -p  listigu dosierujstakon lokante po unu eron sur linio\n"
+"    -v  listigu po unu eron de la dosierujstako en linio, metante\n"
+"        antaŭ la dosierujnomo �ian numeron en la stako \n"
+"\n"
+"    Argumentoj:\n"
+"    +N\teligu la N-an eron (numerante de maldekstre kaj ekde 0) de la\n"
+"        listo eligebla per senopcia „dirs‟\n"
+"\n"
+"    -N\teligu la N-an eron (numerante de dekstre kaj ekde 0) en la\n"
+"        listo eligebla per senopcia „dirs‟\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, krom se aperas misa opcio aÅ­ okazas eraro."
+
+# shopt [-pqsu] [-o] [optname ...]
+# shopt [-pqsu] [-o] [OPCINOMO ...]
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"Ŝaltu kaj mal�altu �elajn opciojn\n"
+"\n"
+"    Ŝan�u la staton de ĉiu el la OPCINOMOj. Sen opciaj argumentoj,\n"
+"    listigu ĉiujn doniajn OPCINOMOjn -- aŭ ĉiujn �elajn opciojn se\n"
+"    neniu OPCINOMO estas donita, -- indikante pri ĉiu el ili, ĉu �i\n"
+"    estas �altita.\n"
+"\n"
+"    Opcioj:\n"
+"    -o  limigu OPCINOMOJn je tiuj difinitaj por uzo per «set -o»\n"
+"    -p  eligu ĉiun �elan opcion indikante ĉu �i estas �altita\n"
+"    -q  silentigu eligon\n"
+"    -s  �altu (aktivigu) ĉiun el la OPCINOMOj\n"
+"    -u  mal�altu (malaktivigu) ĉiun el la OPCINOMOj\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, se OPCINOMO estas �altita; malsukceso, se aperas misa\n"
+"    opcio, aŭ se OPCINOMO estas mal�altita."
+
+# printf [-v var] format [arguments]
+# printf [-v VAR] FORMATO [ARGUMENTOJ]
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"Aran�u kaj eligu ARGUMENTOJn laŭ FORMATO.\n"
+"\n"
+"    Opcio:\n"
+"    -v VAR  eligu en �elvariablon VAR anstataŭ en la ĉefeligujon\n"
+"\n"
+"    FORMATO estas signoĉeno entenanta 3 tipojn da objektoj:\n"
+"    ordinaraj signoj, simple kopiataj en la ĉefeligujon;\n"
+"    eskapsekvencoj por signo, konvertataj kaj kopiataj en la ĉefeligujon; \n"
+"    kaj formataj specifoj, ĉiu el kiuj kaŭzas eligon de vica argumento.\n"
+"\n"
+"    Aldone al la normaj specifiloj laŭ „printf(1)‟,  printf komprenas:\n"
+"\n"
+"      „%b‟ igas malvolvi deklivajn (\\) eskapsekvencojn en sia argumento;\n"
+"      „%q‟ encitiligu la argumenton en formon taŭgan por �ela re-enigo;\n"
+"      „%(fmt)T‟ servas por eligi data-tempan signoĉenon kiel farus\n"
+"                „strftime(3)‟ laŭ la formatoĉeno fmt.\n"
+"\n"
+"    La formato estas iteracie reuzata kiom necesas por konsumi ĉiujn\n"
+"    argumentojn.  Se estas malpli da argumentoj ol la formato\n"
+"    bezonas, la kromaj specifoj estas interpretataj tiel, kvazaÅ­ la\n"
+"    mankantaj argumentoj estus nuloj aŭ vakuaj signoĉenoj (laŭokaze).\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, krom se aperas misa opcio aÅ­ okazas eraro pri skribo aÅ­\n"
+"    valorizo."
+
+# complete [-abcdefgjksuv] [-pr] [-DEI] [-o OPCIO] [-A AGO] [-G ÅœABLONO]
+#          [-W VORTLISTO]  [-F FUNKCIO] [-C KOMANDO] [-X FILTRILO]
+#          [-P PREFIKSO] [-S SUFIKSO] [NOMO ...]
+#: builtins.c:1971
+#, fuzzy
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Difinu, kiel Readline kompletigu argumentojn.\n"
+"\n"
+"    Por ĉiu NOMO difinu, kiel la argumentoj estu kompletigotaj.  Se\n"
+"    nenia opcio estas donita, eligu la aktualajn \n"
+"    kompletigoregulojn en formo reuzebla por enigo en la �elon.\n"
+"\n"
+"    Opcioj:\n"
+"    -p\teligu kompletigoregulojn en formo uzebla por enigo en la �elon\n"
+"    -r\tforigu la kompletigoregulon por ĉiu NOMO, aŭ, se nenia NOMO\n"
+"\testas donita, ĉiujn kompletigoregulojn\n"
+"    -D  apliku la indikitajn kompletigojn kaj agojn DefaÅ­lte por la\n"
+"        komandoj sen specifa kompletigo-difino\n"
+"    -E  apliku la indikitajn kompletigojn kaj agojn al vakuaj (Empty)\n"
+"        komandoj (la kompletigoj provotaj en vakua komandolinio)\n"
+"    -I  apliku la kompletigojn kaj agojn al la unua (kutime, la\n"
+"        komanda) vorto\n"
+"\n"
+"    Ĉe provo kompletigi la agoj apliki�as laŭ la ordo de majusklaj\n"
+"    opcioj en la ĉi-supra listo. Se pluraj opcioj estas donitaj, la\n"
+"    opcio „-D“ antaŭas la opcion „-E“, kaj ili ambaŭ antaŭas la\n"
+"    opcion „-I“.\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, krom se misa opcio estas donita, aÅ­ eraro okazis."
+
+# compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat]
+# 	[-W wordlist] [-P prefix] [-S suffix] [-X filterpat]
+# 	[-F function] [-C command] [word]
+# compgen [-abcdefgjksuv] [-o OPCIO]  [-A AGO] [-G ÅœABLONO]
+# 	[-W VORTLISTO]  [-F FUNKCIO] [-C KOMANDO] [-X FILTRILO]
+# 	[-P PREFIKSO] [-S SUFIKSO] [VORTO]
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Montru la eblajn kompletigojn depende je la opcioj\n"
+"\n"
+"    Destinita por uzo en �elfunkcio generanta eblajn kompletigojn.  Se\n"
+"    la eventuala argumento VORTO estas donita, generu �iajn kongruaĵojn.\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, krom se aperas misa opcio aÅ­ okazas eraro."
+
+# compopt [-o|+o OPCIO] [-DE] [NOMO ...]
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"Ŝan�u aŭ vidigu opciojn pri kompletigo\n"
+"\n"
+"    Ŝan�u la kompletigajn opciojn por ĉiu NOMO, aŭ - se nenia NOMO\n"
+"    estas indikita - la nune plenumatan kompletigon.  Se nenia OPCIO\n"
+"    estas donita, eligu la kompletigajn opciojn por ĉiu NOMO aŭ la\n"
+"    kurantan kompletigan regularon.\n"
+"\n"
+"    Opcioj:\n"
+"    -o OPCIO  Ŝaltu kompletigan OPCIOn por ĉiu NOMO\n"
+"    -D        Ŝan�u opciojn por la Defaŭlta komandokompletigo\n"
+"    -E        Ŝan�u opciojn por la vakua (Empty) komandokompletigo\n"
+"    -I        Ŝan�u la kompletigajn opciojn por la unua vorto.\n"
+"\n"
+"    Uzante «+o» anstataŭ «-o» oni mal�altas la indikitan OPCIOn.\n"
+"\n"
+"    Argumentoj:\n"
+"    Ĉiu NOMO indikas komandon, por kiu kompletiga regulo devas esti\n"
+"    jam difinita per la primitivaĵo „complete‟.  Se nenia NOMO estas\n"
+"    donita, tiam la komandon compopt devas voki funkcio generanta, kaj\n"
+"    �uste la opcioj por ĉi tiu nune plenumata generilo de kompletigoj\n"
+"    estu �an�itaj.\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, krom se aperas misa opcio, aÅ­ por NOMO mankas difino de\n"
+"    kompletiga regulo."
+
+# mapfile [-n count] [-O origin] [-s count] [-t] [-u fd] [-C callback]
+# 	[-c quantum] [array]
+# mapfile [-n NOMBRILO] [-O ORIGINO] [-s NOMBRILO] [-t] [-u DN] [-C RETROVOKO]
+# 	[-c KVANTO] [TABELO] 
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"Legu liniojn el la ĉefenigujo en tabelvariablon\n"
+"\n"
+"    Legu liniojn el la ĉefenigujo en la entjerindican variablon\n"
+"    TABELO, aŭ el la dosiernumero DN, se ĉeestas la opcio „-u‟.\n"
+"    DefaÅ­lte TABELO estas la variablo MAPFILE.\n"
+"\n"
+"    Opcioj:\n"
+"    -d DISIG    Por fini liniojn uzu ne la linifinilon, sed DISIG\n"
+"    -n KIOM     Kopiu maksimume KIOMon da linioj.  Se KIOM\n"
+"                estas 0, kopiu ĉiujn liniojn\n"
+"    -O ORIGINO  Komencu valorizi la TABELOn ekde la indekso ORIGINO.\n"
+"                La defaÅ­lta origino estas 0.\n"
+"    -s KIOM     Ignoru KIOMon da unuaj linioj\n"
+"    -t          Forigu la vostan DISIG el ĉiu legita linio (defaŭlte\n"
+"                la linifinilon)\n"
+"    -u DN       Legu per la dosiernunero DN anstataŭ el la ĉefenigujo\n"
+"    -C RETROVOKO  Plenumu RETROVOKOn post ĉiu KVANTO da legitaj linioj\n"
+"    -c KVANTO\tPo kiom da linioj legi inter sinsekvaj RETROVOKOj\n"
+"\n"
+"    Argumento:\n"
+"    TABELO\tNomo de tabelvariablo uzota por la legotaj datumoj\n"
+"\n"
+"    Se „-C‟ aperas sen „-c‟, la defaŭlta kvanto estas 5000.  Ĉe\n"
+"    komputo de RETROVOKO ĉi tiu ricevas la indicon de la sekva\n"
+"    valorizota tabelano kaj la en �in skribotan linion kiel kromajn\n"
+"    argumentojn.\n"
+"\n"
+"    Se mankas malimplica ORIGINO, mapfile vi�os la TABELOn antaŭ\n"
+"    valorizi �in.\n"
+"\n"
+"    Elirstato:\n"
+"    Sukceso, krom se aperas misa opcio aÅ­ TABELO estas nurlega aÅ­\n"
+"    �i ne estas entjerindica tabelo."
+
+# readarray [-n count] [-O origin] [-s count] [-t] [-u fd] [-C callback]
+# 	  [-c quantum] [array]
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Legu liniojn el dosiero en tabelvariablon.\n"
+"\n"
+"    Sinonimo de „mapfile‟."
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "Liveras la kuntekston de la kuranta procedurvoko.\n"
+#~ "\n"
+#~ "  Sen ESPR liveras "
+
+# ifdef DEBUG ... internal_warning():
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process: process %5ld (%s) in the_pipeline"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "Nekonata signalnumero"
diff --git a/po/es.gmo b/po/es.gmo
new file mode 100644
index 0000000..455535b
--- /dev/null
+++ b/po/es.gmo
diff --git a/po/es.po b/po/es.po
new file mode 100644
index 0000000..55c5cab
--- /dev/null
+++ b/po/es.po
@@ -0,0 +1,6046 @@
+# Mensajes en español para GNU bash
+# Copyright (C) 2018, 2019 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+# Cristian Othón Martínez Vera <cfuga@cfuga.mx>, 2000 - 2011.
+# Francisco Javier Serrador <fserrador@gmail.com>
+# Antonio Ceballos Roa <aceballos@gmail.com>, 2018, 2019
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: GNU bash 5.0\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2019-08-18 10:08+0200\n"
+"Last-Translator: Antonio Ceballos Roa <aceballos@gmail.com>\n"
+"Language-Team: Spanish <es@tp.org.es>\n"
+"Language: es\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "subíndice de matriz incorrecto"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr "%s: se elimina el atributo nameref"
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: no se puede convertir la matriz indexada en asociativa"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: clave de matriz asociativa no válida"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: no se puede asignar a un índice que no es numérico"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr "%s: %s: se debe usar un subíndice al asignar a una matriz asociativa"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: no se puede crear: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr ""
+"bash_execute_unix_command: no se puede encontrar la combinación de teclas "
+"para la orden"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: el primer carácter que no es espacio en blanco no es «\"»"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "no hay un `%c' que cierre en %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: falta un «:» separador"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "`%s': no se puede borrar la asignación"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr "expansión de llaves: no se puede asignar memoria a %s"
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr "expansión de llaves: fallo al asignar memoria a %u elementos"
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr "expansión de llaves: fallo al asignar memoria a «%s»"
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "`%s': nombre de alias inválido"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "no se activó la edición de línea"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "`%s': nombre de combinación de teclas inválido"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: no se puede leer: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "`%s': nombre de función desconocido"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s no está asignado a ninguna tecla.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s se puede invocar vía "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "`%s': no se puede borrar la asignación"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "cuenta de bucle"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "solo tiene significado en un bucle `for', `while', o `until'"
+
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Devuelve el contexto de la llamada a subrutina actual.\n"
+"    \n"
+"    Sin EXPR, devuelve \"$linea $nombrefichero\".  Con EXPR, devuelve\n"
+"    \"$linea $subrutina $nombrefichero\"; esta información adicional\n"
+"    se puede usar para proporcionar un volcado de pila.\n"
+"    \n"
+"    El valor de EXPR indica cuántos marcos de llamada hay que retroceder\n"
+"    antes del actual; el marco superior es el marco 0.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve 0 a menos que el shell no esté ejecutando una función de shell\n"
+"    o EXPR sea inválida."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "HOME no está definido"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "demasiados argumentos"
+
+#: builtins/cd.def:342
+msgid "null directory"
+msgstr "directorio nulo"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "OLDPWD no está establecido"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "línea %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "aviso: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: modo de empleo: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: la opción requiere un argumento"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: se requiere un argumento numérico"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: no encontrado"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: opción inválida"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: nombre de opción inválido"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "`%s': no es un identificador válido"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "número octal inválido"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "número hexadecimal inválido"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "número inválido"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: la especificación de señal no es válida"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "`%s': no es un pid o una especificación válida de trabajo"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: variable de sólo lectura"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s fuera de rango"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "argumento"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s fuera de rango"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: no existe ese trabajo"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: no hay control de trabajos"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "no hay control de trabajos"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: restringido"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "restringido"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: no es una orden interna de shell"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "error de escritura: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "error al establecer los atributos de la terminal: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "error al obtener los atributos de la terminal: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: error al obtener el directorio actual: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: especificación de trabajo ambigua"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr "ayuda no disponible en esta versión"
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: no se puede borrar: %s es de solo lectura"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: no se puede borrar"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: nombre de acción inválido"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: no hay especificación para completado"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "aviso: es posible que la opción -F no funcione como se espera"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "aviso: es posible que la opción -C no funcione como se espera"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "no se está ejecutando la función de completado"
+
+# sólo se puede usar. sv
+# De acuerdo. cfuga
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "sólo se puede usar dentro de una función"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr "%s: referencia variable no puede ser una matriz"
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr "%s: no se permiten las autoreferencias a variables nameref"
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s: referencia de nombre circular"
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "`%s': nombre variable inválido para referencia de nombre"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "no se puede usar `-f' para hacer funciones"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: función de sólo lectura"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr "%s: asignación obsoleta de matriz compuesta entrecomillada"
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: no se pueden destruir variables de matriz de esta forma"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: no se puede convertir una matriz asociativa a indexada"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "la carga dinámica no está disponible"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "no se puede abrir el objeto compartido %s: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "no se puede encontrar %s en el objeto compartido %s: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: no cargado dinámicamente"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr ""
+"función de carga para %s devuelve fallo (%d): no se ha efectuado la carga"
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: no cargado dinámicamente"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: no se puede borrar: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: es un directorio"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: no es un fichero regular"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: el fichero es demasiado grande"
+
+# file=fichero. archive=archivo. Si no, es imposible traducir tar. sv
+# De acuerdo. Corregido en todo el fichero. cfuga
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: no se puede ejecutar el fichero binario"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: no se puede ejecutar: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "cerrar sesión\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "no es un shell de inicio de sesión: utilice `exit'"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Hay trabajos detenidos.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Hay trabajos en ejecución.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "no se ha encontrado ninguna orden"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "especificación de historia"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: no se puede abrir el fichero temporal: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "actual"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "trabajo %d iniciado sin control de trabajo"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: opción ilegal -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: la opción requiere un argumento -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "asociación desactivada"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: tabla de asociación vacía\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "coinc\torden\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Órdenes de shell que coinciden con la palabra clave`"
+msgstr[1] "Órdenes de shell que coinciden con las palabras claves`"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"no hay temas de ayuda que coincidan con `%s'.  Pruebe `help help' o `man -k "
+"%s' o `info %s'."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: no se puede abrir: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Estas órdenes de shell están definidas internamente.  Teclee `help' para\n"
+"ver esta lista.\n"
+"Teclee `help nombre' para saber más sobre la función `nombre'.\n"
+"Utilice `info bash' para saber más sobre la shell en general.\n"
+"Utilice `man -k' o `info' para saber más sobre las órdenes que no están en\n"
+"esta lista.\n"
+"\n"
+"Un asterisco (*) junto a un nombre significa que la orden está desactivada.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "no se puede usar más de uno de -anrw"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "posición en la historia"
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: marca de tiempo inválida"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: falló la expansión de la historia"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: falló inlib"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "no se permiten otras opciones con `-x'"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: los argumentos deben ser IDs de procesos o trabajos"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Error desconocido"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "se esperaba una expresión"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: no es una matriz indexada"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: especificación de descriptor de fichero inválida"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: descriptor de fichero inválido: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: cuenta de líneas inválida"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: origen de matriz inválido"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: quantum de llamada inválido"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "nombre de variable matriz vacío"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "se requiere el soporte de variable de matriz"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "`%s': falta el carácter de formato"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "`%c': especificación de formato de tiempo inválida"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "`%c': carácter de formato inválido"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "aviso: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "problema con el análisis del formato: %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "falta el dígito hexadecimal para \\x"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "falta el dígito unicode para \\%c"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "no hay otro directorio"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s: argumento inválido"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<no hay directorio actual>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "la pila de directorios está vacía"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "índice de pilas de directorios"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Muestra la lista de directorios actualmente grabados.  Los directorios\n"
+"    encuentran en la lista con la orden `pushd'; pueden ir saliendo de\n"
+"    la lista con la orden `popd'.\n"
+"    \n"
+"    Opciones:\n"
+"      -c\tlimpia la pila de directorios eliminando todos los elementos\n"
+"      -l\tno muestra las versiones con prefijo de tilde de los directorios\n"
+"    \t\trelativos a su directorio inicial\n"
+"      -p\tmuestra la pila de directorios con una entrada por línea\n"
+"      -v\tmuestra la pila de directorios con una entrada por línea con\n"
+"    \tsu posición en la pila como prefijo\n"
+"    \n"
+"    Argumentos:\n"
+"      +N\tMuestra la N-ésima entrada contando desde la izquierda de la "
+"lista\n"
+"    \tmostrada por dirs cuando se llama sin opciones, empezando en cero.\n"
+"    \n"
+"      -N\tMuestra la N-ésima entrada contando desde la derecha de la lista\n"
+"    \tmostrada por dirs cuando se llama sin opciones, empezando en cero."
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Agrega un directorio a la parte superior de la pila de directorios\n"
+"    o rota la pila, haciendo que la nueva parte superior de la pila\n"
+"    sea el directorio de trabajo actual.  Sin argumentos, intercambia\n"
+"    los dos directorios de la parte superior.\n"
+"    \n"
+"    Opciones:\n"
+"      -n\tSuprime el cambio normal de directorio al añadir directorios\n"
+"    \ta la pila, de forma que solo se manipula la pila.\n"
+"    \n"
+"    Argumentos:\n"
+"      +N\tRota la pila para que el N-ésimo directorio (contando\n"
+"    \tdesde la izquierda de la lista mostrada por `dirs',\n"
+"    \tcomenzando desde cero) esté en la parte superior.\n"
+"      -N\tRota la pila para que el N-ésimo directorio (contando\n"
+"    \tdesde la derecha de la lista mostrada por `dirs',\n"
+"    \tcomenzando desde cero) esté en la parte superior.\n"
+"    \n"
+"      dir\tAñade DIR a la pila de directorios en la parte superior,\n"
+"    \thaciéndolo el nuevo directorio de trabajo actual.\n"
+"    \n"
+"    La orden interna `dirs' muestra la pila de directorios."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Quita entradas de la pila de directorios.  Sin argumentos, borra\n"
+"    el directorio superior de la pila, y cambia al nuevo directorio "
+"superior.\n"
+"    \n"
+"    Opciones:\n"
+"      -n\tSuprime el cambio normal de directorio cuando se borran\n"
+"    \tdirectorios de la pila, de modo que solo se manipula la pila.\n"
+"    \n"
+"    Argumentos:\n"
+"      +N\tBorra la N-ésima entrada contando desde la izquierda de\n"
+"    \tla lista mostrada por `dirs', comenzando desde cero.\n"
+"    \tPor ejemplo: `popd +0' borra el primer directorio, `popd +1'\n"
+"    \tel segundo.\n"
+"    \n"
+"      -N\tBorra la N-ésima entrada contando desde la derecha de\n"
+"    \tla lista mostrada por `dirs', comenzando desde cero. Por\n"
+"    \tejemplo: `popd -0' borra el último directorio, `popd -1' el\n"
+"    \tpenúltimo.\n"
+"    \n"
+"    La orden interna `dirs' muestra la pila de directorios."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: especificación del tiempo de expiración inválida"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "error de lectura: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr ""
+"sólo se puede usar `return' desde una función o un script leído con `source'"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "no se puede borrar al mismo tiempo una función y una variable"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: no es una variable de matriz"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: no es una función"
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr "%s: no se puede exportar"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "contador de desplazamiento"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "no se pueden activar y desactivar opciones del shell simultáneamente"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: nombre de opción de shell inválido"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "argumento de nombre de fichero requerido"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: no se encontró el fichero"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "no se puede suspender"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "no se puede suspender un shell de entrada"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s es un alias de `%s'\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s es una palabra clave del shell\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s: es una función\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s es una función interna de shell especial\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s es una orden interna del shell\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s is %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s está asociado (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: límite de argumento inválido"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "`%c': orden incorrecta"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: no se puede obtener el límite: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "límite"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: no se puede modificar el límite: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "número octal"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "`%c': operador de modo simbólico inválido"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "`%c': carácter de modo simbólico inválido"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " línea "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "última orden: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Abortando..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr "INFORME: "
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "error de orden desconocida"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "tipo de orden incorrecto"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "conector erróneo"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "salto erróneo"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: variable sin asignar"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\aha expirado mientras esperaba alguna entrada: auto-logout\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "no se puede redirigir la entrada estándar desde /dev/null: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "TIMEFORMAT: `%c': carácter de formato inválido"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr "execute_coproc: coproc [%d:%s] aún existe"
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "error de tubería"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr "eval: nivel máximo de anidamiento de evaluaciones excedido (%d)"
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr "%s: nivel máximo de anidamiento de lecturas con `source' excedido (%d)"
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr "%s: nivel máximo de anidamiento de funciones excedido (%d)"
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: restringido: no se puede especificar `/' en nombres de órdenes"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: orden no encontrada"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: intérprete erróneo"
+
+# file=fichero. archive=archivo. Si no, es imposible traducir tar. sv
+# De acuerdo. Corregido en todo el fichero. cfuga
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: no se puede ejecutar fichero binario: %s"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "`%s': es una orden interna especial"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "no se puede duplicar el df %d al df %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "se ha excedido el nivel de recursión de la expresión"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "desbordamiento de la pila de recursión"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "error sintáctico en la expresión"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "se intentó asignar a algo que no es una variable"
+
+#: expr.c:530
+msgid "syntax error in variable assignment"
+msgstr "error sintáctico en asignación de variable"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "división por 0"
+
+# token en bison fue traducido como terminal. ¿Lo traducimos igual aquí
+# o lo dejamos como 'unidad' o 'elemento'? cfuga
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "defecto: elemento de asignación de expresión erróneo"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "se esperaba `:' para la expresión condicional"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "exponente menor que 0"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr ""
+"se esperaba un identificador después del pre-incremento o pre-decremento"
+
+# falta , singular em+
+# mmmh, puede faltar más de un paréntesis cfuga
+# tiene razón Enrique, es singular. cfuga
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "falta un `)'"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "error sintáctico: se esperaba un operando"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "error sintáctico: operador aritmético inválido"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (el elemento de error es \"%s\")"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "base aritmética inválida"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: cuenta de líneas inválida"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "valor demasiado grande para la base"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: error de expresión\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: no se puede acceder a los directorios padre"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "no se puede reestablecer el modo nodelay para el df %d"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr ""
+"no se puede asignar un nuevo descriptor de fichero para la entrada de bash "
+"desde el df %d"
+
+# buffer: espacio intermedio , alojamiento intermedio ( me gusta menos )
+# em+
+# almacenamiento intermedio. cfuga
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr ""
+"save_bash_input: el almacenamiento intermedio ya existe para el nuevo df %d"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: tubería de pgrp"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "el pid `forked' %d aparece en el trabajo en ejecución %d"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "borrando el trabajo detenido %d con grupo de proceso %ld"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process: pid %5ld (%s) se marca como vivo aún"
+
+# Cambiaría 'hay' por 'existe' em+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: no existe tal pid"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Señal %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Hecho"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Detenido"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Detenido(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "Ejecutando"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Hecho(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Salida %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Estado desconocido"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(`core' generado) "
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (da: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "setpgid hijo (%ld a %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: pid %ld no es un proceso hijo de este shell"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: No hay un registro del proceso %ld"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: el trabajo %d está detenido"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: no existe ese trabajo"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: el trabajo ha terminado"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: el trabajo %d ya está en segundo plano"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr "waitchld: se activa WNOHANG para evitar el bloque indefinido"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: línea %d: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (`core' generado)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(dir ahora: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: falló getpgrp"
+
+#: jobs.c:4447
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: no hay control de trabajos en segundo plano"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: disciplina de línea"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "no se puede establecer el grupo de proceso de terminal (%d)"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "no hay control de trabajos en este shell"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: falló la aserción: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d: aserción arruinada\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "desconocido"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: bloque en la lista libre sobreescrito"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: se llamó con un argumento de bloque previamente liberado"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: se llamó con un argumento de bloque sin asignar"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr ""
+"free: se detectó un desbordamiento por debajo; mh_nbytes fuera de rango"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr ""
+"free: se detectó un desbordamiento por debajo; mh_nbytes fuera de rango"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr ""
+"free: los tamaños de los fragmentos del inicio y del final son diferentes"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: se llamó con un argumento de bloque sin asignar"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr ""
+"realloc: se detectó un desbordamiento por debajo; mh_nbytes fuera de rango"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr ""
+"realloc: se detectó un desbordamiento por debajo; mh_nbytes fuera de rango"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: los tamaños de los pedazos de inicio y fin son diferentes"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: ¿la tabla alloc está llena con FIND_ALLOC?\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: ¿%p ya está en la tabla como asignado?\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: ¿%p ya está en la tabla como libre?\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "base inválida"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: anfitrión desconocido"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: servicio inválido"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: especificación de ruta de red errónea"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "no hay soporte para operaciones de red"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: no se puede cambiar el local (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: no se puede cambiar el local (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: no se puede cambiar el local (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: no se puede cambiar el local (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "Tiene correo en $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "Tiene correo nuevo en $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "El correo en %s fue leído\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "error sintáctico: se requiere una expresión aritmética"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "error sintáctico: `;' inesperado"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "error sintáctico: `((%s))'"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: tipo de instrucción %d erróneo"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr ""
+"el documento-aquí en la línea %d está delimitado por fin-de-fichero (se "
+"esperaba `%s')"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr ""
+"make_redirection: la instrucción de redirección `%d' está fuera de rango"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+"shell_getc: shell_input_line_size (%zu) excede TAMAÑO_MAX (%lu): línea "
+"truncada"
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr "número máximo de documentos en «here--document» excedido"
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "EOF inesperado mientras se buscaba un `%c' coincidente"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "EOF inesperado mientras se buscaba `]]'"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "error sintáctico en la expresión condicional: elemento inesperado `%s'"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "error sintáctico en la expresión condicional"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "elemento inesperado `%s', se esperaba `)'"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "se esperaba `)'"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "argumento inesperado `%s' para el operador unario condicional"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "argumento inesperado para el operador unario condicional"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "elemento inesperado `%s', se esperaba un operador binario condicional"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "se esperaba un operador binario condicional"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "argumento inesperado `%s' para el operador binario condicional"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "argumento inesperado para el operador binario condicional"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "elemento inesperado `%c' en la orden condicional"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "elemento inesperado `%s' en la orden condicional"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "elemento inesperado %d en la orden condicional"
+
+# Token: elemento ?
+# error sintáctico, no se esperaba el símbolo `%c' em+
+# No puedo tomar tal cual la corrección. El error puede no ser
+# provocado por el símbolo. Simplemente estar cerca del mismo. cfuga
+# Por consistencia con el siguiente, yo borraría la coma. sv
+# Cierto. Coma borrada. cfuga
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "error sintáctico cerca del elemento inesperado `%s'"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "error sintáctico cerca de `%s'"
+
+# Propongo cambio de orden:
+# no se esperaba el final de la línea em+
+# Ojo, que end of file es fin de fichero, no de línea. sv
+# Se hicieron ambos cambios. cfuga
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "error sintáctico: no se esperaba el final del fichero"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "error sintáctico"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Utilice \"%s\" para dejar el shell.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "EOF inesperado mientras se buscaba un `)' coincidente"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "completion: función `%s' no encontrada"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr "programmable_completion: %s: posible bucle de reintento"
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: COMPSPEC nulo"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: conector erróneo `%d'"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: descriptor de fichero inválido"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: puntero NULL a fichero"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != numfich xtrace fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: `%c': carácter de formato inválido"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "descriptor de fichero fuera de rango"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: redireccionamiento ambiguo"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: no se puede sobreescribir un fichero existente"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: restringido: no se puede redirigir la salida"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "no se puede crear un fichero temporal para el documento-aquí: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: no se puede asignar el fd a la variable"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "no se admite /dev/(tcp|udp)/anfitrion/puerto sin red"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "error de redirección: no se puede duplicar el df"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "¡no se puede encontrar /tmp, crear por favor!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp debe ser un nombre de directorio válido"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr "modo de impresión bonita desactivado en shells interactivos"
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: opción inválida"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "no se puede establecer el uid %d: uid efectivo %d"
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "no se puede establecer gid a %d: gid efectivo %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr "no puede ejecutar el depurador; modo depurado desactivado"
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr "%s: es un directorio"
+
+# Yo pondría "no tengo ningún nombre". sv
+# Revisé el código fuente de bash. Es un mensaje de error cuando no se
+# encuentra el nombre del usuario que ejecuta el shell. cfuga
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "¡No tengo nombre de usuario!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, versión %s-(%s)\n"
+
+# En la lista spanglish se discutió mucho sobre script,
+# no sé en que quedó, ni puedo decirte ahora cómo lo hemos
+# traducido en otras ocasiones. Sehll script lo henmos traducido
+# como guión del shell , eso es seguro ... así que puede estar
+# bien así , ya lo verán otros em+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Modo de empleo:\t%s [opción GNU larga] [opción] ...\n"
+"\t%s [opción GNU larga] [opción] fichero de shell ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "Opciones GNU largas:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Opciones del shell:\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-irsD o -c orden o -O opción_shopt\t\t(sólo invocación)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s o -o opción\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+"Teclee `%s -c \"help set\"' para más información sobre las opciones del "
+"shell.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr ""
+"Teclee `%s -c help' para más información sobre las órdenes internas del "
+"shell.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "Utilice la orden `bashbug' para reportar defectos.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr "página inicial bash: <http://www.gnu.org/software/bash>\n"
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr "Ayuda general utilizando software GNU: <http://www.gnu.org/gethelp/>\n"
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: operación inválida"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Señal ambigua"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Colgar"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Interrumpir"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Salir"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Instrucción ilegal"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "BPT rastreo/captura"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "instrucción ABORT"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "instrucción EMT"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Excepción de coma flotante"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Matado"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Error del bus"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Violación de segmento"
+
+# llamada del sistema em+
+# Es una llamada a una función del sistema em+
+# De acuerdo, pero lo que está mal es la forma de invocar la
+# llamada a la función del sistema, no la llamada en sí cfuga
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Llamada al sistema errónea"
+
+# (pipe) no, por favor. Esto ya está traducido en libc, así que a estas
+# alturas, la gente ya debería saber qué es eso de la tubería. sv
+# De acuerdo. cfuga
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Tubería rota"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Temporizador"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Terminado"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Condición de E/S urgente"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Detenido (señal)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Continúa"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "El proceso hijo ha muerto o está parado"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Detenido (entrada por terminal)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Detenido (salida por terminal)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "E/S listas"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "Límite de CPU"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "Límite de ficheros"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Alarma (virtual)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Alarma (entorno)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Ventana cambiada"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Bloqueo de registro"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Señal de usuario 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Señal de usuario 2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "entrada de datos HFT pendiente"
+
+# falla: fallo em+
+# Suscribo lo anterior. falla suena muy raro.
+# Yo lo pondría además al revés: fallo de energía inminente. sv
+# Me gusta como lo sugieres. Cambio hecho. cfuga
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "fallo de energía inminente"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "caída del sistema inminente"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "migrando el proceso a otra CPU"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "error de programación"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "el modo monitor HFT ha sido concedido"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "el modo monitor HTF ha sido retirado"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "la secuencia de sonido HFT ha sido completada"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "Solicitud de información"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "Señal Desconocida #%d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "sustitución errónea: no hay un `%s' que cierre en %s"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: no se puede asignar una lista a un miembro de la matriz"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "no se puede crear la tubería para la sustitución del proceso"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "no se puede crear un proceso hijo para la sustitución del proceso"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "no se puede abrir la tubería llamada %s para lectura"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "no se puede abrir la tubería llamada %s para escritura"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "no se puede duplicar la tubería llamada %s como df %d"
+
+#: subst.c:6213
+msgid "command substitution: ignored null byte in input"
+msgstr "sustitución de orden: se ignora byte nulo en la entrada"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "no se puede crear la tubería para la sustitución de la orden"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "no se puede crear un proceso hijo para la sustitución de la orden"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute: no se puede duplicar la tubería como df 1"
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: nombre de variable inválido para referencia de nombre"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: expansión indirecta inválida"
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr "%s: nombre de variable inválido"
+
+#: subst.c:7256
+#, c-format
+msgid "%s: parameter not set"
+msgstr "%s: parámetro no establecido"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: parámetro nulo o no establecido"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: expresión de subcadena < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: sustitución errónea"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: no se puede asignar de esta forma"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+"versiones futuras del intérprete obligarán la evaluación como una "
+"sustitución aritmética"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "sustitución errónea: no hay una \"`\" que cierre en %s"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "no hay coincidencia: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "se esperaba un argumento"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: se esperaba una expresión entera"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "`)' esperado"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "se esperaba `)', se encontró %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: se esperaba un operador binario"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: se esperaba un operador unario"
+
+# Singular em+
+# Puede faltar más de un ] cfuga
+# Cierto, pero al menos uno seguro que falta.
+# Yo creo que no hace falta el (n). sv
+# Abreviando "falta [al menos] un `]'" saldría: "falta un `]'".
+# ¿No es mejor "falta algún `]'"? cfuga
+# Tiene razón Enrique: singular. cfuga
+#: test.c:881
+msgid "missing `]'"
+msgstr "falta un `]'"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "error sintáctico: `;' inesperado"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "número de señal inválido"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr ""
+"manejador de capturas: se ha excedido el nivel máximo de manejadores de "
+"capturas (%d)"
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: valor erróneo en trap_list[%d]: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps: el manejador de señal es SIG_DFL, reenviando %d (%s) a mí "
+"mismo"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: señal errónea %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "error al importar la definición de la función para `%s'"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "el nivel de shell (%d) es demasiado alto, se reestablece a 1"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: no hay contexto de función en el ámbito actual"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: variable quizá no es valor asignado"
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr "%s: asignando entero a nombre referencia"
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: no hay contexto de función en el ámbito actual"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s tiene exportstr nulo"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "carácter inválido %d en exportstr para %s"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "no hay `=' en exportstr para %s"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr ""
+"pop_var_context: la cabeza de shell_variables no es un contexto de función"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: no es un contexto global_variables"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr ""
+"pop_scope: la cabeza de shell_variables no es un ámbito de entorno temporal"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: no se puede abrir como FICHERO"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: valor inválido para el descriptor de fichero de rastreo"
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s: valor de compatibilidad fuera del rango"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Copyright (C) 2018 Free Software Foundation, Inc."
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"Licencia GPLv3+: GPL de GNU versión 3 o posterior <http://gnu.org/licenses/"
+"gpl.html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, versión %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr "Esto es software libre, es libre para modificar y redistribuirlo."
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "No hay NINGUNA GARANT�A, a la extensión permitida por la ley."
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: no se pueden asignar %lu bytes (%lu bytes asignados)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: no se pueden asignar %lu bytes"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: no se pueden asignar %lu bytes (%lu bytes asignados)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: no se pueden asignar %lu bytes"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [nombre[=valor] ... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] nombre [nombre ...]"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpsvPSVX] [-m comb_teclas] [-f fichero] [-q nombre] [-u nombre] [-r "
+"secteclas] [-x secteclas:orden-shell] [secteclas:función-leerlinea o orden-"
+"leerlinea]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [orden-interna-shell [arg ...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [expresión]"
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]]] [dir]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] orden [arg ...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilrtux] [-p] [nombre[=valor] ...]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilnrtux] [-p] nombre[=valor] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [opción] nombre[=valor] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [arg ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [arg ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f fichero] [nombre ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [arg ...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts cadena_opciones nombre [arg]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a nombre] [orden [argumentos ...]] [redirección ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr "fc [-e nombre_e] [-lnr] [primero] [último] o fc -s [pat=rep] [orden]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [id_trabajo]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [id_trabajo ...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p ruta] [-dt] [nombre ...]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [patrón ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d despl] [n] o history -anrw [fichero] o history -ps arg "
+"[arg...]"
+
+# jobspec no es sólo el pid del proceso, puede ser tambien
+# el nombre de la orden que se creo con el proceso em+
+# por eso es idtrabajo, no pidtrabajo. De cualquier forma, no me agrada
+# mucho. ¿Sugerencias? cfuga
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [idtrabajo ...] o jobs -x orden [args]"
+
+# lo mismo em+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [idtrabajo ... | pid ...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s id_señal | -n num_señal | -id_señal] pid | idtrabajo ... o kill -l "
+"[id_señal]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let arg [arg ...]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a matriz] [-d delim] [-i texto] [-n ncars] [-N ncars] [-p "
+"prompt] [-t tiempo] [-u df] [nombre ...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o nombre-opción] [--] [arg ...]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [nombre ...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [nombre[=valor] ...] ó export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [nombre[=valor] ...] ó readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source fichero [argumentos]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". fichero [argumentos]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [expresión]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ arg... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[arg] id_señal ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] nombre [nombre ...]"
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [modo]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-fn] [id ...]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [pid ...]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for NOMBRE [in PALABRAS ... ] ; do ÓRDENES; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( exp1; exp2; exp3 )); do ÓRDENES; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select NOMBRE [in PALABRAS ... ;] do ÓRDENES; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] tubería"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case PALABRA in [PATRÓN [| PATRÓN]...) ÓRDENES ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if ÓRDENES; then ÓRDENES; [ elif ÓRDENES; then ÓRDENES; ]...[ else "
+"ÓRDENES; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while ÓRDENES; do ÓRDENES; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until ÓRDENES; do ÓRDENES; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [NOMBRE] orden [redirecciones]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function nombre { ÓRDENES ; } o nombre () { ÓRDENES ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ ÓRDENES ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "id_trabajo [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( expresión ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ expresión ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "variables - Nombres y significados de algunas variables de shell"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | dir"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [nombre_opción...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v var] formato [argumentos]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o opción] [-A acción] [-G patglob] [-"
+"W listapalabras] [-F función] [-C orden] [-X patfiltro] [-P prefijo] [-S "
+"sufijo] [nombre ...]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o opción]  [-A acción] [-G patglob] [-W "
+"listapalabras] [-F función] [-C orden] [-X patfiltro] [-P prefijo] [-S "
+"sufijo] [palabra]"
+
+#: builtins.c:239
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o opción] [-DEI] [nombre ...]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-d delim] [-n cuenta] [-O origen] [-s cuenta] [-t] [-u df] [-C "
+"llamada] [-c quantum] [matriz]"
+
+#: builtins.c:244
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-d delim] [-n cuenta] [-O origen] [-s cuenta] [-t] [-u df] [-C "
+"llamada] [-c quantum] [matriz]"
+
+# Más en español sería: se define un alias por cada NOMBRE cuyo VALOR se da. sv
+# Lo mismo de antes: el alias es expandido -> el alias se expande. sv
+# no alias -> ningún alias. sv
+# De acuerdo. cfuga
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Define o muestra alias.\n"
+"    \n"
+"    Sin argumentos `alias' muestra la lista de alias en el formato\n"
+"    reutilizable `alias NOMBRE=VALOR' en la salida estándar.\n"
+"    \n"
+"    En caso contrario, se define un alias por cada NOMBRE cuyo VALOR se\n"
+"    proporcione.  Un espacio final en VALOR causa que se revise\n"
+"    la siguiente palabra para sustitución de alias cuando se expande\n"
+"    el alias.\n"
+"    \n"
+"    Opciones:\n"
+"      -p\tmuestra todos los alias definidos en un formato reutilizable\n"
+"    \n"
+"    Estado de Salida:\n"
+"    alias devuelve verdadero a menos que se dé un NOMBRE para el cual\n"
+"    no se haya definido ningún alias."
+
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Quita cada NOMBRE de la lista de alias definidos.\n"
+"    \n"
+"    Opciones:\n"
+"      -a\tquita todas las definiciones de alias.\n"
+"    \n"
+"    Devuelve verdadero a menos que un NOMBRE no sea un alias existente."
+
+# lee 'la'... em+
+# Corregido. Además, es plural: lee las asignaciones... cfuga
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"Establece secuencias de teclas y variables de Readline.\n"
+"    \n"
+"    Asigna una secuencia de teclas a una función Readline o a una macro, o\n"
+"    establece una variable Readline.  La sintaxis de los argumentos que\n"
+"    no son opciones es equivalente a la que se encuentra en ~/.inputrc,\n"
+"    pero se debe pasar como un solo argumento:\n"
+"    p.ej., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Opciones:\n"
+"      -m  comb_teclas    Usa COMB_TECLAS como la combinación de teclas "
+"durante el\n"
+"                         que dure esta orden.  Los nombres de combinaciones\n"
+"                         de teclas aceptables son emacs, emacs-standard,\n"
+"                         emacs-meta, emacs-ctlx, vi, vi-move, vi-command y\n"
+"                         vi-insert.\n"
+"      -l                 Lista los nombres de las funciones.\n"
+"      -P                 Lista los nombres de las funciones y asignaciones.\n"
+"      -p                 Lista las funciones y asignaciones de tal forma "
+"que\n"
+"                         se pueda ruutilizar como entrada.\n"
+"      -S                 Lista las secuencias de teclas que invocan macros\n"
+"                         y sus valores.\n"
+"      -s                 Lista las secuencias de teclas que invocan macros\n"
+"                         y sus valores en una forma que se pueden reutilizar "
+"como\n"
+"                         entrada.\n"
+"      -V                 Lista los nombres de variables y valores.\n"
+"      -v                 Lista los nombres de variables y valores en una\n"
+"                         forma que se pueden reutilizar como entrada.\n"
+"      -q nombre-función  Pregunta qué teclas invocan la función nombrada.\n"
+"      -u nombre-función  Borra todas las teclas que están ligadas a\n"
+"                         la función nombrada.\n"
+"      -r secteclas       Borra la asignación para la SECTECLAS.\n"
+"      -f fichero         Lee las asignaciones de teclas del FICHERO.\n"
+"      -x secteclas:orden-shell\tCausa que se ejecute la ORDEN-SHELL cuando\n"
+"    \t\t\t\tse introduce la SECTECLAS.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    bind devuelve 0 a menos que se presente una opción desconocida o suceda\n"
+"    un error."
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Termina bucles for, while o until.\n"
+"    \n"
+"    Termina un bucle FOR, WHILE o UNTIL.  Si se especifica N, termina\n"
+"    N bucles anidados.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    El estado de salida es 0 a menos que N no sea mayor o igual a 1."
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Reanuda bucles for, while o until\n"
+"    \n"
+"    Reanuda la siguiente iteración del bucle FOR, WHILE o UNTIL\n"
+"    circundante.  Si se especifica N, reanuda en el N-ésimo bucle "
+"circundante.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    El estado de salida es 0 a menos que N no sea mayor o igual a 1."
+
+#: builtins.c:354
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Ejecuta órdenes internas del shell\n"
+"    \n"
+"    Ejecuta la ORDEN-INTERNA-SHELL con los argumentos ARGs sin realizar la\n"
+"    búsqueda interna de órdenes.  Esto es útil cuando se desea "
+"reimplementar\n"
+"    una orden interna de la shell como una función de shell, pero se "
+"necesita\n"
+"    ejecutar la orden interna dentro de la función.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve el estado de salida de la ORDEN-INTERNA-SHELL, o falso si la\n"
+"    ORDEN-INTERNA-SHELL no es una orden interna de shell."
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Devuelve el contexto de la llamada a subrutina actual.\n"
+"    \n"
+"    Sin EXPR, devuelve \"$linea $nombrefichero\".  Con EXPR, devuelve\n"
+"    \"$linea $subrutina $nombrefichero\"; esta información adicional\n"
+"    se puede usar para proporcionar un volcado de pila.\n"
+"    \n"
+"    El valor de EXPR indica cuántos marcos de llamada hay que retroceder\n"
+"    antes del actual; el marco superior es el marco 0.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve 0 a menos que el shell no esté ejecutando una función de shell\n"
+"    o EXPR sea inválida."
+
+# Slash lo venimos traduciendo por barra inclinada , y backslash
+# por barra invertida em++
+# Corregido en toda la traducción. cfuga
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"Modifica el directorio de trabajo del shell.\n"
+"    \n"
+"    Modifica el directorio actual a DIR.  DIR por defecto es el valor de la\n"
+"    variable de shell HOME.\n"
+"    \n"
+"    La variable CDPATH define la ruta de búsqueda para el directorio que\n"
+"    contiene DIR.  Los nombres alternativos de directorio en CDPATH se\n"
+"    separan con dos puntos (:).  Un nombre de directorio nulo es igual que\n"
+"    el directorio actual.  Si DIR comienza con una barra inclinada (/),\n"
+"    entonces no se usa CDPATH.\n"
+"    \n"
+"    Si no se encuentra el directorio, y la opción del shell `cdable_vars'\n"
+"    está activa, entonces se trata la palabra como un nombre de variable.\n"
+"    Si esa variable tiene un valor, se utiliza su valor para DIR.\n"
+"    \n"
+"    Opciones:\n"
+"      -L\tfuerza a seguir los enlaces simbólicos: resuelve los enlaces\n"
+"    \t\tsimbólicos en DIR después de procesar las instancias de `..'\n"
+"      -P\tusa la estructura física de directorios sin seguir los enlaces\n"
+"    \t\tsimbólicos: resuelve los enlaces simbólicos en DIR antes de "
+"procesar\n"
+"    \t\tlas instancias de `..'\n"
+"      -e\tsi se da la opción -P y el directorio actual de trabajo no se\n"
+"    \t\tpuede determinar con éxito, termina con un estado diferente de "
+"cero.\n"
+"    \n"
+"    La acción por defecto es seguir los enlaces simbólicos, como si se\n"
+"    especificara `-L'.\n"
+"    `..' se procesa quitando la componente del nombre de la ruta "
+"inmediatamente\n"
+"    anterior hasta una barra inclinada o el comienzo de DIR.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve 0 si se cambia el directorio, y si $PWD está definido como\n"
+"    correcto cuando se emplee -P; de otra forma es diferente a cero."
+
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"Muestra el nombre del directorio de trabajo actual.\n"
+"    \n"
+"    Opciones:\n"
+"      -L\tmuestra el valor de $PWD si nombra al directorio de\n"
+"    \ttrabajo actual\n"
+"      -P\tmuestra el directorio físico, sin enlaces simbólicos\n"
+"    \n"
+"    Por defecto, `pwd' se comporta como si se especificara `-L'.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve 0 a menos que se de una opción inválida o no se pueda leer\n"
+"    el directorio actual."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Orden nula.\n"
+"    \n"
+"    Sin efecto; la orden no hace nada.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Siempre correcto."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Devuelve un resultado correcto.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Siempre correcto."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Devuelve un resultado incorrecto.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Siempre incorrecto."
+
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Ejecuta una orden simple o muestra información sobre órdenes.\n"
+"    \n"
+"    Ejecuta la ORDEN con ARGumentos, suprimiendo la búsqueda de funciones\n"
+"    de shell, o muestra información sobre las ORDENes especificadas. Se "
+"puede\n"
+"    usar para invocar órdenes en disco cuando existe una función con el "
+"mismo\n"
+"    nombre.\n"
+"    \n"
+"    Opciones:\n"
+"      -p    utiliza un valor predeterminado de RUTA que garantiza que se\n"
+"            encuentren todas las utilidades comunes\n"
+"      -v    muestra una descripción de la ORDEN similar a la orden\n"
+"            interna `type'\n"
+"      -V    muestra una descripción más detallada de cada ORDEN\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve el estado de salida de la ORDEN, o fallo si no se encuentra\n"
+"    la ORDEN."
+
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"Establece valores de variable y atributos.\n"
+"    \n"
+"    Declara variables y les da atributos.  Si no se da ningún NOMBRE,\n"
+"    muestra los atributos y valores de todas las variables.\n"
+"    \n"
+"    Opciones:\n"
+"      -f\trestringe la acción o la información a nombres y definiciones\n"
+"    \t\tde funciones\n"
+"      -F\trestringe la información a nombres de funciones únicamente (con\n"
+"    \t\tnúmero de línea y fichero fuente al depurar)\n"
+"      -g\tcrea variables globales cuando se usa en una función de shell;\n"
+"    \t\ten caso contrario, se descarta\n"
+"      -p\tmuestra los atributos y el valor de cada NOMBRE\n"
+"    \n"
+"    Opciones que establecen atributos:\n"
+"      -a\testablece NOMBREs como matrices indexadas (si se admiten)\n"
+"      -A\testablece NOMBREs como matrices asociativas (si se admiten)\n"
+"      -i\testablece NOMBREs con el atributo `integer'\n"
+"      -l\tconvierte el valor de cada NOMBRE a minúsculas en la asignación\n"
+"      -r\tcrea NOMBREs como de sólo lectura\n"
+"      -t\tcrea NOMBREs con el atributo `trace'\n"
+"      -u\tconvierte el valor de cada NOMBRE a mayúsculas en la asignación\n"
+"      -x\tcrea NOMBREs para exportar\n"
+"    \n"
+"    Si se usa `+' en lugar de `-', se desactiva el atributo dado.\n"
+"    \n"
+"    Las variables con el atributo ‘integer’ realizan evaluación aritmética\n"
+"    (vea la orden `let') cuando se asigna un valor a la variable.\n"
+"    \n"
+"    Cuando se usa en una función, `declare' hace locales a los NOMBREs,\n"
+"    como sucede con la orden `local'.  La opción `-g' suprime esta\n"
+"    conducta.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto a menos que se dé una opción inválida o\n"
+"    suceda un error de asignación de variable."
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"Establece valores de variables y atributos.\n"
+"    \n"
+"    Sinónimo de `declare'.  Vea `help declare'."
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Define variables locales.\n"
+"    \n"
+"    Crea una variable local llamada NOMBRE, y le da un VALOR.  OPCIÓN puede\n"
+"    ser cualquier opción aceptada por `declare'.\n"
+"    \n"
+"    Las variables locales sólo pueden usarse dentro de funciones; son\n"
+"    visibles solo en la función donde se definen y sus hijos.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto a menos que se dé una opción inválida, suceda\n"
+"    un error de asignación, o el shell no esté ejecutando una función."
+
+#: builtins.c:557
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Escribe argumentos en la salida estándar.\n"
+"    \n"
+"    Muestra los ARGumentos en la salida estándar seguidos por un carácter\n"
+"    de fin de línea.\n"
+"    \n"
+"    Opciones:\n"
+"      -n\tno agrega un carácter de fin de línea\n"
+"      -e\tactiva la interpretación de los siguientes caracteres de escape "
+"de\n"
+"    \t\tbarra invertida\n"
+"      -E\tdesactiva explícitamente la interpretación de caracteres de\n"
+"    \t\tescape de barra invertida\n"
+"    \n"
+"    `echo' interpreta los siguientes caracteres de escape de barra "
+"invertida:\n"
+"      \\a\talerta (timbre)\n"
+"      \\b\tborrado hacia atrás\n"
+"      \\c\tsuprime toda salida a continuación\n"
+"      \\e\tcarácter de escape\n"
+"      \\E\tcarácter de escape\n"
+"      \\f\talimentación de papel\n"
+"      \\n\tlínea nueva\n"
+"      \\r\tretorno de carro\n"
+"      \\t\ttabulador horizontal\n"
+"      \\v\ttabulador vertical\n"
+"      \\\\\tbarra invertida\n"
+"      \\0nnn\tcarácter cuyo código ASCII es NNN (octal).  NNN puede ser\n"
+"    \t\tde 0 a 3 dígitos octales\n"
+"      \\xHH\tel de ocho bits cuyo valor es HH (hexadecimal).  HH\n"
+"    \t\tpuede ser de uno o dos dígitos hexadecimales\n"
+"      \\uHHHH\tcarácter Unicode cuyo valor es el valor hexadecimal HHHH.\n"
+"    \t\tHHHH puede tener de uno a cuatro dígitos hexadecimales.\n"
+"      \\UHHHHHHHH carácter Unicode cuyo valor es el valor hexadecimal "
+"HHHHHHHH.\n"
+"    \t\tHHHHHHHH puede tener de uno a ocho dígitos hexadecimales.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto a menos que suceda un error de escritura."
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Escribe argumentos en la salida estándar.\n"
+"    \n"
+"    Muestra los ARGumentos en la salida estándar seguidos por un carácter\n"
+"    de fin de línea.\n"
+"    Opciones:\n"
+"      -n\tno agrega un carácter de fin de línea\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto a menos que suceda un error de escritura."
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"Activa y desactiva las órdenes internas del shell.\n"
+"    \n"
+"    Activa y desactiva las órdenes internas del shell.  El desactivar le\n"
+"    permite ejecutar una orden del disco que tenga el mismo nombre que\n"
+"    la orden interna del shell, sin usar el nombre de ruta completo.\n"
+"    \n"
+"    Opciones:\n"
+"      -a\tmuestra la lista de órdenes internas indicando si están activas o "
+"no\n"
+"      -n\tdesactiva cada NOMBRE o muestra la lista de órdenes internas\n"
+"    \t\tdesactivadas\n"
+"      -p\tmuestra la lista de órdenes internas en una forma reusable\n"
+"      -s\tmuestra solo los nombres de las órdenes internas `especiales' "
+"Posix\n"
+"    \n"
+"    Opciones que controlan la carga dinámica:\n"
+"      -f\tCarga la función interna NOMBRE desde el objeto compartido "
+"FICHERO\n"
+"      -d\tBorra una orden interna cargada con -f\n"
+"    \n"
+"    Sin opciones, se activa cada NOMBRE.\n"
+"    \n"
+"    Para usar el `test' que se encuentra en $PATH en lugar de la orden "
+"interna\n"
+"    del shell, ejecute `enable -n test'.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto a menos que NOMBRE no sea una orden interna del shell\n"
+"    o suceda un error."
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Ejecuta argumentos como una orden de shell.\n"
+"    \n"
+"    Combina los ARGumentos en una sola cadena, usa el resultado como "
+"entrada\n"
+"    para el shell, y ejecuta las órdenes resultantes.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve el estado de salida de la orden o éxito si la orden es nula."
+
+# "a ser reconocidas" no está en español.
+# Yo pondría "las letras de opción que se reconocen". sv
+# en una de dos formas -> en una de las dos formas siguientes em+
+# dar argumentos -> especificar em+
+# De acuerdo. cfuga
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"Decodifica argumentos de opción.\n"
+"\n"
+"    Getopts se usa en procedimientos del shell para decodificar parámetros\n"
+"    posicionales como opciones.\n"
+"    \n"
+"    CADENA_OPCIONES contiene las letras de opción para reconocer; si\n"
+"    una letra es seguida por dos puntos, se espera que la opción tenga\n"
+"    un argumento, del cual se debe separar con espacios en blanco.\n"
+"    \n"
+"    Cada vez que se invoca, getopts colocará la siguiente opción en la\n"
+"    variable de shell $nombre, inicializando nombre si no existe, y el\n"
+"    índice del siguiente argumento a ser procesado en la variable de\n"
+"    shell OPTIND.  OPTIND se inicializa a 1 cada vez que se invoca el\n"
+"    shell, o un guión de shell.  Cuando una opción requiere un argumento,\n"
+"    getopts coloca ese argumento en la variable de shell OPTARG.\n"
+"    \n"
+"    getopts reporta errores en una de las dos formas siguientes.  Si\n"
+"    el primer carácter de OPTSTRING es dos puntos, getopts usa el\n"
+"    aviso de errores silencioso.  En este modo, no se muestran\n"
+"    mensajes de error.  Si se encuentra una opción inválida, getopts\n"
+"    coloca el carácter de opción encontrado en OPTARG.  Si no se\n"
+"    encuentra el argumento necesario, getopts coloca ':' en NOMBRE y\n"
+"    define OPTARG con el carácter de opción encontrado.  Si getopts no\n"
+"    está en modo silencioso, y se encuentra una opción inválida, getopts\n"
+"    coloca '?' en NOMBRE y borra OPTARG.  Si no se encuentra un argumento\n"
+"    necesario, se coloca '?' en NOMBRE, se borra OPTARG, y se muestra\n"
+"    un mensaje de diagnóstico.\n"
+"    \n"
+"    Si la variable de shell OPTERR tiene el valor 0, getopts desactiva\n"
+"    la notificación de mensajes de error, aún si el primer carácter de\n"
+"    OPTSTRING no es ':'.  OPTERR tiene el valor 1 por defecto.\n"
+"    \n"
+"    Getopts normalmente compara los parámetros de posición ($0 - $9),\n"
+"    pero si se especifican más argumentos, éstos se comparan en lugar\n"
+"    de los primeros.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto si se encuentra una opción; falla si se encuentra\n"
+"    el final de las opciones o sucede un error."
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"Reemplaza el shell con la orden dada.\n"
+"    \n"
+"    Ejecuta la ORDEN, reemplazando este shell con el programa especificado.\n"
+"    Los ARGUMENTOS se vuelven los argumentos de la ORDEN.  Si no se\n"
+"    especifica la ORDEN, cualquier redirección toma efecto en el shell "
+"actual.\n"
+"    \n"
+"    Opciones:\n"
+"      -a nombre\tpasa el NOMBRE como el argumento cero de la ORDEN\n"
+"      -c\tejecuta la ORDEN en un entorno vacío\n"
+"      -l\tcoloca un guion en el argumento cero de la ORDEN\n"
+"    \n"
+"    Si la orden no se puede ejecutar, termina un shell no interactivo,\n"
+"    a menos que la opción de shell `execfail' esté activa.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve éxito a menos que no se encuentre la ORDEN o que suceda un\n"
+"    error de redirección."
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Termina el shell.\n"
+"    \n"
+"    Termina el shell con un estado de N.  Si se omite N, el estado de "
+"salida\n"
+"    es el mismo de la última orden ejecutada."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Termina un shell de entrada.\n"
+"    \n"
+"    Termina un shell de entrada con un estado de salida de N. Devuelve un\n"
+"    error si no se ejecuta en un shell de entrada."
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"Muestra o ejecuta órdenes de la lista de la historia.\n"
+"    \n"
+"    fc se usa para listar o editar y reejecutar órdenes de la lista de la\n"
+"    historia.  PRIMERO y ÚLTIMO pueden ser números que especifican el "
+"rango,\n"
+"    o PRIMERO puede ser una cadena, que significa la orden más reciente que\n"
+"    comience con esa cadena.\n"
+"    \n"
+"       -e NOMBRE_E\tselecciona el editor a usar.  Por defecto es FCEDIT,\n"
+"    \t\tdespués EDITOR, después vi\n"
+"       -l \tlista laslíneas en lugar de editar\n"
+"       -n\tomite los números de línea al listar\n"
+"       -r\tinvierte el orden de las líneas (muestra primero las más "
+"recientes)\n"
+"    \n"
+"    Con el formato `fc -s [pat=rep ...] [orden]', la ORDEN se\n"
+"    ejecuta de nuevo después de realizar la sustitución ANT=NUEVO.\n"
+"    \n"
+"    Un alias útil para usar con esto es r='fc -s', tal que al teclear\n"
+"    `r cc' ejecuta la última orden que comience con `cc' y al teclear\n"
+"    `r' reejecuta la última orden.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto o el estado de la orden ejecutada; si sucede un "
+"error,\n"
+"    es diferente de cero."
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Mueve el trabajo al primer plano.\n"
+"    \n"
+"    Ubica el trabajo identificado con IDTRABAJO en primer plano y\n"
+"    lo convierte en el trabajo actual.  Si IDTRABAJO no está presente, se "
+"usa\n"
+"    la noción del shell del trabajo actual.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    El estado de la orden ubicada en primer plano, o falla si sucede un "
+"error."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Mueve trabajos al segundo plano.\n"
+"    \n"
+"    Coloca los trabajos identificados por cada IDTRABAJO en segundo plano,\n"
+"    como si se hubieran iniciado con `&'.  Si IDTRABAJO no está presente,\n"
+"    se usa la noción del shell del trabajo actual.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto a menos que el control de trabajos no esté activado o\n"
+"    suceda un error."
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"Almacena o muestra la ubicación de los programas.\n"
+"    \n"
+"    Determina y almacena la ruta completa de cada órden NOMBRE. Si\n"
+"    no se proporcionan argumentos, se muestra la información de las\n"
+"    órdenes almacenadas.\n"
+"    \n"
+"    Opciones:\n"
+"      -d\tolvida la ubicación almacenada de cada NOMBRE\n"
+"      -l\tmuestra en un formato que se puede reutilizar como entrada\n"
+"      -p ruta\tusa RUTA como la ruta completa de NOMBRE\n"
+"      -r\tolvida todas las ubicaciones almacenadas\n"
+"      -t\tmuestra la ubicación almacenada de cada NOMBRE,\n"
+"    \t\tcada ubicación precedida del NOMBRE correspondiente\n"
+"    \t\tsi se dan varios NOMBREs\n"
+"    Argumentos:\n"
+"      NOMBRE\tCada NOMBRE se busca en $PATH y se agrega a la lista\n"
+"    \t\tde órdenes almacenadas.\n"
+"    \n"
+"    Estado de Salida\n"
+"    Devuelve correcto a menos que no se encuentre NOMBRE o se proporcione\n"
+"    una opción inválida."
+
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Muestra información sobre órdenes internas.\n"
+"    \n"
+"    Muestra un resumen breve de las órdenes internas.  Si se especifica\n"
+"    un PATRÓN, da ayuda detallada sobre todas las órdenes que\n"
+"    coincidan con el PATRÓN; en caso contrario, se muestra la lista de\n"
+"    tópicos de ayuda.\n"
+"    \n"
+"    Opciones:\n"
+"      -d\tmuestra una descripción corta para cada tópico\n"
+"      -m\tmuestra el uso en un formato similar a página man\n"
+"      -s\tmuestra sólo una sinopsis breve de uso para cada tópico que\n"
+"    \t\tcoincida con el PATRÓN\n"
+"    \n"
+"    Argumentos:\n"
+"      PATRÓN\tPatrón que especifica un tópico de ayuda\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto a menos que no se encuentre PATRÓN o se proporcione\n"
+"    una opción inválida."
+
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Muestra o manipula la lista de la historia.\n"
+"    \n"
+"    Muestra la lista de la historia con números de línea, mostrando\n"
+"    cada línea modificada con un `*' como prefijo.  El argumento N\n"
+"    muestra solamente las últimas N entradas.\n"
+"    \n"
+"    Opciones:\n"
+"      -c\tborra la lista de historia eliminando todas las entradas\n"
+"      -d despl\tborra la entrada de la historia en la posición DESPL. Los\n"
+"    \t\tdesplazamientos negativos se cuentan hacia atrás desde el final de\n"
+"    \t\tla lista de historia\n"
+"    \n"
+"      -a\tagrega las líneas de historia de esta sesión al fichero de "
+"historia\n"
+"      -n\tlee todas las líneas de historia que no se han leído del fichero\n"
+"    \tde historia\n"
+"      -r\tlee el fichero de historia y agrega el contenido al fichero\n"
+"    \tde historia\n"
+"      -w\tescribe la historia actual en el fichero de historia\n"
+"    \n"
+"      -p\thace expansión de historia en cada ARGumento y muestra el\n"
+"    \tresultado, sin guardarlo en la lista de historia\n"
+"      -s\tagrega los ARGumentos a la lista de historia como\n"
+"    \tuna sola entrada\n"
+"    \n"
+"    Si se proporciona FICHERO, entonces se usa como el fichero de\n"
+"    historia. Si no, si $HISTFILE tien un valor, éste se usa, en otro caso\n"
+"    ~/.bash_history.\n"
+"    \n"
+"    Si la variable $HISTTIMEFORMAT está definida y no es nula, se usa su\n"
+"    valor como una cadena de formato strftime(3) para mostrar la marca de\n"
+"    tiempo asociada con cada entrada de historia mostrada.  No se muestra\n"
+"    ninguna marca de tiempo de otra forma.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto a no ser que se dé una opción inválida u ocurra un "
+"error."
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"Muestra el estado de los trabajos.\n"
+"    \n"
+"    Muestra los trabajos activos.  IDTRABAJO restringe la salida a\n"
+"    esa trabajo.  Sin opciones, se muestra el estado de todas los trabajos\n"
+"    activos.\n"
+"    \n"
+"    Opciones:\n"
+"      -l\tmuestra los IDs de los procesos, además de la información normal\n"
+"      -n\tsolo muestra los procesos que han cambiado de estado desde\n"
+"    \t\tla última notificación\n"
+"      -p\tsolo muestra los IDs de los procesos\n"
+"      -r\trestringe la salida a los trabajos en ejecución\n"
+"      -s\trestringe la salida a los trabajos detenidos\n"
+"    \n"
+"    Si se especifica -x, la ORDEN se ejecuta después de que todas las\n"
+"    especificaciones de trabajo que aparecen en ARGS se hayan reemplazado\n"
+"    con el ID de proceso del líder del grupo de procesos de dicho trabajo.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto a menos que se dé una opción inválida o suceda un\n"
+"    error.  Si se usa -x, devuelve el estado de salida de la ORDEN."
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"Quita trabajos del shell actual.\n"
+"    \n"
+"    Quita cada argumento IDTRABAJO de la tabla de trabajos activos.  Sin\n"
+"    ningún IDTRABAJO, el shell utiliza su noción del trabajo actual.\n"
+"    \n"
+"    Opciones:\n"
+"      -a\tquita todas los trabajos si no se proporciona IDTRABAJO\n"
+"      -h\tmarca cada IDTRABAJO para que no se le envíe SIGHUP\n"
+"    \t\tsi el shell recibe un SIGHUP\n"
+"      -r\tquita solo los trabajos en ejecución\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto a menos que se proporcionen una opción o\n"
+"    un IDTRABAJO inválida."
+
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Envía una señal a una trabajo.\n"
+"    \n"
+"    Envía a los procesos nombrados por PID (o IDTRABAJO) la señal ID_SEÑAL\n"
+"    o NUM_SEÑAL. Si no están presentes ni ID_SEÑAL o NUM_SEÑAL, se asume\n"
+"    SIGTERM.\n"
+"    \n"
+"    Opciones:\n"
+"      -s sig\tSIG es un nombre de señal\n"
+"      -n sig\tSIG es un número de señal\n"
+"      -l\tlista los nombres de señales; si hay argumentos a continuación\n"
+"    \t\tde `-l', se asume que son números de señal para las cuales se debe\n"
+"    mostrar el nombre.\n"
+"    \n"
+"    Kill es una orden interna del shell por dos razones: permite que se\n"
+"    puedan utilizar IDs de trabajo en lugar de IDs de proceso y permite\n"
+"    matar procesos si se ha alcanzado el límite de procesos que se pueden\n"
+"    crear.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto a menos que se dé una opción inválida o suceda un "
+"error."
+
+# "a ser evaluada" no está en español. sv
+# Cierto. ¿Así está mejor? cfuga
+# overflow -> desbordamiento o sobrepasamiento. nunca lo he visto
+# traducido como sobreflujo. sv
+# Corregido. cfuga
+# No sé si existe precedencia en español, pero me suena fatal.
+# Yo pondría simplemente "prioridad". sv
+# Creo que si existe, pero tu sugerencia es mejor. cfuga
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"Evalúa expresiones aritméticas.\n"
+"    \n"
+"    Evalúa cada ARG como una expresión aritmética.  La evaluación se hace\n"
+"    con enteros de longitud fija, sin revisar desbordamientos, aunque la\n"
+"    la división por 0 se captura y se marca como un error.  La siguiente\n"
+"    lista de operadores está agrupada en niveles de operadores de la misma\n"
+"    prioridad.  Los niveles se muestran en orden de prioridad decreciente.\n"
+"    \n"
+"    \tid++, id--\tpost-incremento, post-decremento de variable\n"
+"    \t++id, --id\tpre-incremento, pre-decremento de variable\n"
+"    \t-, +\t\tmenos, más unario\n"
+"    \t!, ~\t\tnegación lógica y basada en bits\n"
+"    \t**\t\texponenciación\n"
+"    \t*, /, %\t\tmultiplicación, división, residuo\n"
+"    \t+, -\t\tadición, sustracción\n"
+"    \t<<, >>\t\tdesplazamientos de varios bit izquierdo y derecho\n"
+"    \t<=, >=, <, >\tcomparación\n"
+"    \t==, !=\t\tequivalencia, inequivalencia\n"
+"    \t&\t\tAND de varios bit\n"
+"    \t^\t\tXOR de varios bit\n"
+"    \t|\t\tOR de varios bit\n"
+"    \t&&\t\tAND lógico\n"
+"    \t||\t\tOR lógico\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\toperador condicional\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tasignación\n"
+"    \n"
+"    Se permiten las variables de shell como operandos.  El nombre\n"
+"    de la variable se reemplaza por su valor (coercionado a un\n"
+"    entero de longitud fija) dentro de una expresión.  La variable\n"
+"    no necesita tener activado su atributo entero para emplearse\n"
+"    en una expresión.\n"
+"    \n"
+"    Los operadores se evalúan en orden de prioridad.  Primero se\n"
+"    evalúan las sub-expresiones en paréntesis y pueden sobrepasar\n"
+"    las reglas de prioridad anteriores.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Si el último ARGumento se evalúa como 0, ‘let’ devuelve 1; de\n"
+"    otra forma, ‘let’ devuelve 0."
+
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"Lee una línea de la salida estándar y la divide en campos.\n"
+"    \n"
+"    Lee una sola línea de la entrada estándar, o del descriptor de\n"
+"    fichero FD si se proporciona la opción -u.  La línea se divide en "
+"campos\n"
+"    con separación de palabras, y la primera palabra se asigna al primer\n"
+"    NOMBRE, la segunda palabra al segundo NOMBRE, y así sucesivamente, con\n"
+"    las palabras restantes asignadas al último NOMBRE.  Sólo los caracteres\n"
+"    que se encuentran en $IFS se reconocen como delimitadores de palabras.\n"
+"    \n"
+"    Si no se proporciona ningún NOMBRE, la línea leída se guarda en la\n"
+"    variable REPLY.\n"
+"    \n"
+"    Opciones:\n"
+"      -a matriz\tasigna las palabras leídas a índices secuenciales de\n"
+"    \t\tla variable matricial MATRIZ, empezando en cero\n"
+"      -d delim\tcontinúa hasta que se lea el primer carácter de DELIM,\n"
+"    \t\ten lugar de línea nueva\n"
+"      -e\tusa Readline para obtener la línea\n"
+"      -i texto\tEmplea el TEXTO como el texto inicial para Readline\n"
+"      -n ncars\tregresa tras leer NCARS caracteres en lugar de\n"
+"    \t\tesperar una línea nueva, pero honra a un delimitador si\n"
+"    \t\tse leen menos de NCARS caracteres antes del delimitador\n"
+"      -N ncars\tdevuelve sólo después de leer exactamente NCARS\n"
+"    \t\tcaracteres, a menos que se encuentre el fin del fichero\n"
+"    \t\to expire la lectura, descartando cualquier delimitador\n"
+"      -p prompt\tsale la cadena PROMPT sin un carácter de línea nueva\n"
+"    \t\tal final antes de intentar leer\n"
+"      -r\t\tno permite que las barras invertidas escapen caracteres\n"
+"      -s\t\tno muestra la salida que proviene de una terminal\n"
+"      -t tiempo\texpira y devuelve fallo si no se lee una línea completa\n"
+"    \t\tde entrada en TIEMPO segundos.  El valor de la variable TMOUT\n"
+"    \t\tes el tiempo de expiración por defecto.  TIEMPO puede ser un\n"
+"    \t\tnúmero fraccionario.  Si TIEMPO es 0, ‘read’ devuelve correcto\n"
+"    \t\tsólo si hay entrada disponible en el descriptor de fichero\n"
+"    \t\tespecificado.  El estado de salida es mayor que 128 si se excede\n"
+"    \t\tel tiempo de expiración.\n"
+"      -u df\t\tlee del descriptor de fichero DF en lugar de la entrada\n"
+"    \t\testándar\n"
+"    \n"
+"    Estado de Salida:\n"
+"    El código de devolución es cero, a menos que se encuentre un final de\n"
+"    línea, el tiempo de lectura se agote, o se proporcione un descriptor\n"
+"    de fichero inválido como el argumento de -u."
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"Devuelve de una función de shell.\n"
+"    \n"
+"    Causa que una función o un script leído termine con el valor devuelto\n"
+"    especificado por N.  Si se omite N, el estado devuelto es el de la "
+"última\n"
+"    orden ejecutada dentro de la función o script.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve N, o falla si el shell no está ejecutando una función o un "
+"script."
+
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"Establece o borra los valores de las opciones de shell y los parámetros\n"
+"posicionales.\n"
+"    \n"
+"    Modifica el valor de los atributos de shell y los parámetros "
+"posicionales,\n"
+"    o muestra los nombres y valores de las variables de shell.\n"
+"    \n"
+"    Opciones:\n"
+"      -a  Marca las variables que se modifican o crean para exportación.\n"
+"      -b  Notifica el término de trabajos inmediatamente.\n"
+"      -e  Termina inmediatamente si una orden termina con un estado\n"
+"          diferente a cero.\n"
+"      -f  Desactiva la generación de nombres de ficheros (englobamiento).\n"
+"      -h  Recuerda la ubicación de las órdenes como se localizaron.\n"
+"      -k  Todos los argumentos de asignación se colocan en el ambiente para "
+"una\n"
+"          orden, no solo aquellos que preceden al nombre de la orden.\n"
+"      -m  Activa el control de trabajos.\n"
+"      -n  Lee órdenes pero no las ejecuta.\n"
+"      -o nombre-opción\n"
+"          Establece la variable correspondiente a nombre-opción:\n"
+"              allexport    igual que -a\n"
+"              braceexpand  igual que -B\n"
+"              emacs        usa una interfaz de edición lineal estilo emacs\n"
+"              errexit      igual que -e\n"
+"              errtrace     igual que -E\n"
+"              functrace    igual que -T\n"
+"              hashall      igual que -h\n"
+"              histexpand   igual que -H\n"
+"              history      activa la historia de órdenes\n"
+"              ignoreeof    el shell no terminará después de leer EOF\n"
+"              interactive-comments\n"
+"                           permite que haya comentarios en órdenes "
+"interactivas\n"
+"              keyword      igual que -k\n"
+"              monitor      igual que -m\n"
+"              noclobber    igual que -C\n"
+"              noexec       igual que -n\n"
+"              noglob       igual que -f\n"
+"              nolog        actualmente se acepta pero se descarta\n"
+"              notify       igual que -b\n"
+"              nounset      igual que -u\n"
+"              onecmd       igual que -t\n"
+"              physical     igual que -P\n"
+"              pipefail     el valor de retorno de una tubería es el estado\n"
+"                           de la última orden que sale con un estado "
+"diferente\n"
+"                           de cero, o cero si ninguna orden termina con un\n"
+"                           estado diferente de cero\n"
+"              posix        modifica el comportamiento de bash donde la\n"
+"                           operación por defecto difiere del estándar POSIX\n"
+"                           para que coincida con el estándar\n"
+"              privileged   igual que -p\n"
+"              verbose      igual que -v\n"
+"              vi           usa una interfaz de edición de línea estilo vi\n"
+"              xtrace       igual que -x\n"
+"      -p  Activo cuando los ids real y efectivo del usuario no coinciden.\n"
+"          Desactiva el procesamiento del fichero $ENV y la importación de\n"
+"          funciones de shell.  Si se desactiva esta opción causa que el uid "
+"y\n"
+"          el gid efectivos sean iguales al uid y el gid real.\n"
+"      -t  Termina después de leer y ejecutar una orden.\n"
+"      -u  Trata las variables sin definir como un error al sustituir.\n"
+"      -v  Muestra las líneas de entrada del shell mientras se leen.\n"
+"      -x  Muestra las órdenes y sus argumentos mientras se ejecutan.\n"
+"      -B  el shell realizará expansión de llaves.\n"
+"      -C  Si se activa, no permite que los ficheros regulares existentes\n"
+"          se sobreescriban por redirección de la salida.\n"
+"      -E  Si se activa, las funciones del shell heredan la trampa ERR.\n"
+"      -H  Activa el estilo de sustitución de historia ! . Esta opción está\n"
+"          activa por defecto cuando el shell es interactivo.\n"
+"      -P  Si se activa, no sigue enlaces simbólicos cuando se ejecutan "
+"órdenes\n"
+"          como cd, que cambian el directorio actual.\n"
+"      -T  Si se activa, las funciones del shell heredan la trampa DEBUG.\n"
+"      --  Asigna cualquier argumento restante a los parámetros "
+"posicionales.\n"
+"          Si no restan argumentos, se desactivan los parámetros "
+"posicionales.\n"
+"      -   Asigna cualquier argumento restante a los parámetros "
+"posicionales.\n"
+"          Las opciones -x y -v se desactivan.\n"
+"    \n"
+"    Si se usa + en lugar de - causa que estas opciones se desactiven. Las\n"
+"    opciones también se pueden usar en la invocación del shell.  El "
+"conjunto\n"
+"    actual de opciones se puede encontrar en $-.  Los n ARGs restantes son\n"
+"    parámetros posicionales que se asignan, en orden, a $1, $2, .. $n.  Si "
+"no\n"
+"    se proporciona ningún ARG, se muestran todas las variables del shell.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto a menos que se proporcione una opción inválida."
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"Desactiva valores y atributos de las variables y funciones del shell.\n"
+"    \n"
+"    Por cada NOMBRE, borra la función o variable correspondiente.\n"
+"    \n"
+"    Opciones:\n"
+"      -f\ttrata cada NOMBRE como una función de shell\n"
+"      -v\ttrata cada NOMBRE como una variable de shell\n"
+"      -n\ttrata cada NOMBRE como una referencia de nombre y desasigna\n"
+"    \t\tla propia variable, no aquella a la que hace referencia\n"
+"    \n"
+"    Sin opciones, unset primero trata de borrar una variable, y si falla,\n"
+"    trata de borrar una función.\n"
+"    \n"
+"    Algunas variables no se pueden borrar; también consulte `readonly'.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto a menos que se proporcione una opción inválida o\n"
+"    un NOMBRE sea de sólo lectura."
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Establece el atributo de exportación para las variables de shell.\n"
+"    \n"
+"    Marca cada NOMBRE para exportación automática al ambiente para las "
+"órdenes\n"
+"    ejecutadas subsecuentemente.  Si se proporciona un VALOR, se asigna el\n"
+"    VALOR antes de exportar.\n"
+"    \n"
+"    Opciones:\n"
+"      -f\tse refiere a funciones de shell\n"
+"      -n\tborra la propiedad de exportación para cada NOMBRE\n"
+"      -p\tmuestra una lista de todas las variables y funciones exportadas\n"
+"    \n"
+"    El argumento `--' desactiva el procesamiento posterior de opciones.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto a menos que se proporcione una opción inválida o que\n"
+"    NOMBRE sea inválido."
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Marca las variables de shell para evitar su modificación.\n"
+"    \n"
+"    Marca cada NOMBRE como de sólo lectura; los valores de esos NOMBREs\n"
+"    no se pueden modificar por asignaciones subsecuentes.  Si se "
+"proporciona\n"
+"    un VALOR, se asigna el VALOR antes de marcar como de sólo lectura.\n"
+"    \n"
+"    Opciones:\n"
+"      -a\tse refiere a variables de matriz indexada\n"
+"      -A\tse refiere a variables de matriz asociativa\n"
+"      -f\tse refiere a funciones de shell\n"
+"      -p\tmuestra una lista de todas las variables y funciones de sólo "
+"lectura,\n"
+"    \t\tdependiendo de si se pone o no la opción -f\n"
+"    \n"
+"    El argumento `--' desactiva el procesamiento posterior de opciones.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto a menos que se proporcione una opción inválida o\n"
+"    el NOMBRE sea inválido."
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"Desplaza los parámetros posicionales.\n"
+"    \n"
+"    Renombra los parámetros posicionales $N+1,$N+2 ... a $1,$2 ... Si no\n"
+"    se proporciona N, se asume que es 1.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto a menos que N sea negativo o mayor que $#."
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Ejecuta órdenes de un fichero en el shell actual.\n"
+"    \n"
+"    Lee y ejecuta órdenes del FICHERO en el shell actual.  Se utilizan las\n"
+"    entradas en $PATH para encontrar el directorio que contiene el FICHERO.\n"
+"    Si se proporciona ARGUMENTOS, se convierten en los parámetros "
+"posicionales\n"
+"    cuando se ejecuta el FICHERO.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve el estado de la última orden ejecutada del FICHERO; falla si\n"
+"    no se puede leer el FICHERO."
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Suspende la ejecución del shell.\n"
+"    \n"
+"    Suspende la ejecución de este shell hasta que recibe una señal SIGCONT.\n"
+"    Los shells de entrada no se pueden suspender, a menos que sean "
+"forzados.\n"
+"    \n"
+"    Opciones:\n"
+"      -f\tfuerza la suspensión, aún si el shell es un shell de entrada\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto a menos que no esté activo el control de trabajos o\n"
+"    suceda un error."
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"Evalúa expresiones condicionales.\n"
+"    \n"
+"    Termina con un estado de 0 (verdadero) o 1 (falso) dependiendo de\n"
+"    la evaluación de EXPR.  Las expresiones pueden ser unarias o binarias.\n"
+"    Las expresiones unarias se usan generalmente para examinar el estado\n"
+"    de un fichero.  Hay también operadores de cadenas, y operadores de\n"
+"    comparación numérica.\n"
+"    \n"
+"    El comportamiento de test depende del número de argumentos.  Lea la "
+"página\n"
+"    de manual de bash para la especificación completa.\n"
+"    \n"
+"    Operadores de fichero:\n"
+"    \n"
+"      -a FICHERO     Verdadero si el fichero existe.\n"
+"      -b FICHERO     Verdadero si el fichero es especial de bloques.\n"
+"      -c FICHERO     Verdadero si el fichero es especial de caracteres.\n"
+"      -d FICHERO     Verdadero si el fichero es un directorio.\n"
+"      -e FICHERO     Verdadero si el fichero existe.\n"
+"      -f FICHERO     Verdadero si el fichero existe y es un fichero "
+"regular.\n"
+"      -g FICHERO     Verdadero si el fichero tiene activado el set-group-"
+"id.\n"
+"      -h FICHERO     Verdadero si el fichero es un enlace simbólico.\n"
+"      -L FICHERO     Verdadero si el fichero es un enlace simbólico.\n"
+"      -k FICHERO     Verdadero si el fichero tiene el bit `sticky' "
+"activado.\n"
+"      -p FICHERO     Verdadero si el fichero es una tubería nombrada.\n"
+"      -r FICHERO     Verdadero si el fichero es legible para usted.\n"
+"      -s FICHERO     Verdadero si el fichero existe y no está vacío.\n"
+"      -S FICHERO     Verdadero si el fichero es un `socket'.\n"
+"      -t DF          Verdadero si el DF está abierto en una terminal.\n"
+"      -u FICHERO     Verdadero si el fichero tiene activado el set-user-id.\n"
+"      -w FICHERO     Verdadero si usted puede escribir en el fichero.\n"
+"      -x FICHERO     Verdadero si usted puede ejecutar el fichero.\n"
+"      -O FICHERO     Verdadero si usted efectivamente posee el fichero.\n"
+"      -G FICHERO     Verdadero si su grupo efectivamente posee el fichero.\n"
+"      -N FICHERO     Verdadero si el fichero se modificó desde la última "
+"lectura.\n"
+"    \n"
+"      FICH1 -nt FICH2  Verdadero si fich1 es más reciente que fich2\n"
+"                       (de acuerdo a la fecha de modificación).\n"
+"    \n"
+"      FICH1 -ot FICH2  Verdadero si fich1 es más antiguo que fich2.\n"
+"    \n"
+"      FICH1 -ef FICH2  Verdadero si fich1 es un enlace duro a fich2.\n"
+"    \n"
+"    Operadores de cadenas:\n"
+"    \n"
+"      -z CADENA      Verdadero si la cadena está vacía.\n"
+"    \n"
+"      -n CADENA\n"
+"         CADENA      Verdadero si la cadena no está vacía.\n"
+"    \n"
+"      CADENA1 = CADENA2\n"
+"                     Verdadero si las cadenas son iguales.\n"
+"      CADENA1 != CADENA2\n"
+"                     Verdadero si las cadenas no son iguales.\n"
+"      CADENA1 < CADENA2\n"
+"                     Verdadero si STRING1 se ordena antes que STRING2\n"
+"                     lexicográficamente.\n"
+"      CADENA1 > CADENA2\n"
+"                     Verdadero si STRING1 se ordena después que STRING2\n"
+"                     lexicográficamente.\n"
+"    \n"
+"    Otros operadores:\n"
+"    \n"
+"      -o OPCIÓN      Verdadero si la opción del shell OPCIÓN está activada.\n"
+"      -v VAR         Verdadero si la variable de shell VAR está activada.\n"
+"      -R VAR         Verdadero si la variable VAR está activada y es una\n"
+"                       referencia de nombre\n"
+"      ! EXPR         Verdadero si expr es falso.\n"
+"      EXPR1 -a EXPR2 Verdadero si expr1 Y expr2 son ambas verdaderas.\n"
+"      EXPR1 -o EXPR2 Verdadero si cualquiera de expr1 O expr2 es verdadera.\n"
+"    \n"
+"      arg1 OP arg2   Pruebas aritméticas.  OP es uno de -eq, -ne,\n"
+"                       -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Los operadores binarios aritméticos devuelven verdadero si ARG1 es\n"
+"    igual, no igual, menor, menor o igual, mayor, mayor o igual que ARG2.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto si EXPR evalúa a verdadero; falla si EXPR evalúa a\n"
+"    falso o se proporciona un argumento inválido."
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Evalúa una expresión condicional.\n"
+"    \n"
+"    Este es un sinónimo para la orden interna \"test\", pero el último\n"
+"    argumento debe ser un `]' literal, que concuerde con el `[' inicial."
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Muestra los tiempos de proceso.\n"
+"    \n"
+"    Muestra los tiempos de usuario y sistema acumulados por el shell y "
+"todos\n"
+"    sus procesos hijos.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Siempre correcto."
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"Atrapa señales y otros eventos.\n"
+"    \n"
+"    Define y activa manejadores para ejecutar cuando el shell recibe "
+"señales\n"
+"    u otras condiciones.\n"
+"    \n"
+"    ARG es una orden para leer y ejecutar cuando el shell recibe la(s)\n"
+"    señal(es) ID_SEÑAL.  Si ARG no está presente (y sólo se proporciona\n"
+"    una sola ID_SEÑAL) o se proporciona `-', cada señal especificada se\n"
+"    reestablece a su valor original.  Si ARG es la cadena nula, el shell\n"
+"    y las órdenes que invoque ignoran cada ID_SEÑAL.\n"
+"    \n"
+"    Si una ID_SEÑAL es EXIT (0) se ejecuta la orden ARG al salir del shell.\n"
+"    Si una ID_SEÑAL es DEBUG, se ejecuta ARG después de cada orden simple.\n"
+"    Si una ID_SEÑAL es RETURN, se ejecuta ARG cada vez que una función de\n"
+"    shell o un script ejecutado por las órdenes internas . o source termina\n"
+"    su ejecución.  Una ID_SEÑAL de ERR conlleva que se ejecute ARG cada vez\n"
+"    que un fallo de una orden provocaría que el shell terminase si la\n"
+"    opción -e está activada.\n"
+"    \n"
+"    Si no se proporcionan argumentos, trap muestra la lista de órdenes\n"
+"    asociadas con cada señal.\n"
+"    \n"
+"    Opciones:\n"
+"      -l\tmuestra una lista de nombres de señal con su número "
+"correspondiente\n"
+"      -p\tmuestra las órdenes trap asociadas con cada ID_SEÑAL\n"
+"    \n"
+"    Cada ID_SEÑAL es un nombre de señal en <signal.h> o un número de señal.\n"
+"    Los nombres de señal no son sensibles a mayúsculas y minúsculas y el\n"
+"    prefijo SIG es opcional.  Se puede enviar una señal al shell con\n"
+"    \"kill -signal $$\".    \n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto a menos que una ID_SEÑAL sea inválida o se "
+"proporcione\n"
+"    una opción inválida."
+
+#  No he visto que este fichero incluya la posibilidad de traducir las
+#  palabras que muestra `type -t'. Por esta razón, se dejan en inglés. cfuga
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"Muestra información sobre el tipo de orden.\n"
+"    \n"
+"    Por cada NOMBRE, indica cómo se interpretaría si se utilizara como un\n"
+"    nombre de orden.\n"
+"    \n"
+"    Opciones:\n"
+"      -a\tmuestra todas las ubicaciones que contienen un ejecutable llamado\n"
+"    \t\tNOMBRE; incluye aliases, órdenes internas y funciones, si y solo si\n"
+"    \t\tno se utilizó también la opción `-p'\n"
+"      -f\tsuprime la búsqueda de funciones de shell\n"
+"      -P\tfuerza una búsqueda en PATH por cada nombre, aun si hay un alias,\n"
+"    \t\torden interna o función, y devuelve el nombre del fichero en disco\n"
+"    \t\tque se ejecutaría\n"
+"      -p\tdevuelve el nombre del fichero en disco que se ejecutaría,\n"
+"    \t\to nada si `type -t NOMBRE' no devuelve `fichero'\n"
+"      -t\tsaca una sola palabra, que es una de entre `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' o `', si el NOMBRE es un alias,\n"
+"    \t\tpalabra reservada del shell, función del shell, orden interna del\n"
+"    \t\tshell, fichero de disco, o no se encuentra, respectivamente.\n"
+"    \n"
+"    Argumentos:\n"
+"      NOMBRE\tNombre de orden a interpretar.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto si se encuentran todos los NOMBREs; falla si alguno\n"
+"    no se encuentra."
+
+#: builtins.c:1431
+#, fuzzy
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Modifica los límites de recursos del shell.\n"
+"    \n"
+"    Provee control sobre los recursos disponibles para el shell y los\n"
+"    procesos que crea, en sistemas que permiten tal control.\n"
+"    \n"
+"    Opciones:\n"
+"    \n"
+"      -S\tusa el límite de recurso `soft'\n"
+"      -H\tusa el límite de recurso `hard'\n"
+"      -a\tmuestra todos los límites actuales\n"
+"      -b\tel tamaño del almacenamiento intermedio del `socket'\n"
+"      -c\tel tamaño máximo de los ficheros `core' creados\n"
+"      -d\tel tamaño máximo del segmento de datos de un proceso\n"
+"      -e\tla prioridad máxima de calendarización (`nice')\n"
+"      -f\tel tamaño máximo de los ficheros escritos por el shell y sus "
+"hijos\n"
+"      -i\tel número máximo de señales pendientes\n"
+"      -k\tel número máximo de kcolas ubicadas para este proceso\n"
+"      -l\tel tamaño máximo que un proceso puede bloquear en memoria\n"
+"      -m\tel tamaño máximo para las variables residentes\n"
+"      -n\tel número máximo de descriptores de fichero abiertos\n"
+"      -p\tel tamaño del almacenamiento intermedio para tuberías\n"
+"      -q\tel tamaño máximo de bytes en las colas de mensajes POSIX\n"
+"      -r\tla prioridad máxima de calendarización en tiempo real\n"
+"      -s\tel tamaño máximo de pila\n"
+"      -t\tla cantidad máxima de tiempo de cpu en segundos\n"
+"      -u\tel número máximo de procesos de usuario\n"
+"      -v\tel tamaño de la memoria virtual\n"
+"      -x\tel número máximo de bloqueos de ficheros\n"
+"      -P\tel número máximo de pseudoterminales\n"
+"      -T\tel número máximo de hilos\n"
+"    \n"
+"    No todas las opciones están disponibles en todas las plataformas.\n"
+"    \n"
+"    Si se establece L�MITE, éste es el nuevo valor del recurso "
+"especificado;\n"
+"    los valores especiales de L�MITE `soft', `hard' y `unlimited'\n"
+"    corresponden al límite suave actual, el límite duro actual, y\n"
+"    sin límite, respectivamente.  De otra forma, se muestra el valor actual\n"
+"    de los recursos especificados.  Si no se proporciona una opción, se\n"
+"    asume -f.\n"
+"    \n"
+"    Los valores son en incrementos de 1024 bytes, excepto para -t, el cual\n"
+"    es en segundos, -p, el cual es en incrementos de 512 bytes, y -u, el\n"
+"    cual es un número de procesos sin escala.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto a menos que se proporcione una opción inválida o "
+"suceda\n"
+"    un error."
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"Muestra o establece la máscara de modo de ficheros.\n"
+"    \n"
+"    Establece la máscara de creación de ficheros del usuario a MODO. Si se\n"
+"    omite el MODO, muestra el valor actual de la máscara.\n"
+"    \n"
+"    Si el MODO empieza con un dígito, se interpreta como un número octal;\n"
+"    de otra forma es una cadena de modo simbólico como la que acepta chmod "
+"(1).\n"
+"    \n"
+"    Opciones:\n"
+"      -p\tsi se omite el MODO, muestra en una forma reusable como entrada\n"
+"      -S\tsalida simbólica; de otra forma muestra el modo como número octal\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto a menos que el MODO sea inválido o se proporcione\n"
+"    una opción inválida."
+
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"Espera la terminación del trabajo y devuelve el estado de salida.\n"
+"    \n"
+"    Espera al proceso identificado por ID, el cual puede ser un ID de\n"
+"    proceso o una especificación de trabajo e informa de su estado de "
+"salida.\n"
+"    Si no se proporciona un ID, espera a todos los procesos hijos activos,\n"
+"    y el estado de devolución es cero.  Si ID es una especificación de\n"
+"    trabajo, espera a todos los procesos en la cola de trabajos.\n"
+"    \n"
+"    Si se proporciona la opción -n, espera a que termine el siguiente "
+"trabajo\n"
+"    y devuelve su estado de salida.\n"
+"    \n"
+"    Si se proporciona la opción -f y el control de trabajos está activado,\n"
+"    espera a que termine el ID especificado, en vez de esperar a que cambie "
+"de\n"
+"    estado.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve el estado de ID; falla si ID es inválido o se proporciona una\n"
+"    opción inválida."
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"Espera la terminación del proceso y devuelve el estado de salida.\n"
+"    \n"
+"    Espera a cada proceso especificado por un PID y reporta su\n"
+"    estado de salida.  Si no se proporciona un PID, espera a todos los\n"
+"    procesos hijos activos, y el código de devolución es cero.\n"
+"    El PID debe ser un ID de proceso.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve el estado del último PID; falla si PID es inválido o se "
+"proporciona\n"
+"    una opción inválida."
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Ejecuta órdenes por cada miembro en una lista.\n"
+"    \n"
+"    El bucle `for' ejecuta una secuencia de órdenes para cada miembro en\n"
+"    una lista de elementos.  Si `in PALABRAS ...;' no está presente,\n"
+"    entonces se asume `in \"$@\"'.  Para cada elemento en PALABRAS,\n"
+"    se define NOMBRE como ese elemento, y se ejecutan las ÓRDENES.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve el estado de la última orden ejecutada."
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Aritmétical de bucle for.\n"
+"    \n"
+"    Equivalente a\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tÓRDENES\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, y EXP3 son expresiones aritméticas.  Si se omite\n"
+"    cualquiera de ellas, se comporta como si se evaluara a 1.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve el estado de la última orden ejecutada."
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Selecciona palabras de una lista y ejecuta órdenes.\n"
+"    \n"
+"    Se expanden las PALABRAS, generando una lista de palabras.  El\n"
+"    conjunto de palabras expandidas se muestra en la salida de error\n"
+"    estándar, cada una precedida por un número.  Si `in PALABRAS' no\n"
+"    está presente, se asume `in \"$@\"'.  Entonces se muestra el\n"
+"    prompt PS3 y se lee una línea de la entrada estándar.  Si la\n"
+"    línea consiste en el número correspondiente a una de las palabras\n"
+"    mostradas, entonces se define NOMBRE como esa palabra.  Si la\n"
+"    línea está vacía, PALABRAS y el prompt se muestran de nuevo.  Si\n"
+"    se lee EOF, se completa la orden.  Cualquier otro valor leído\n"
+"    causa que NOMBRE se defina como nulo.  La línea leída se guarda\n"
+"    en la variable REPLY.  Se ejecutan las ÓRDENES después de cada\n"
+"    selección hasta que se ejecuta una orden break.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve el estado de la última orden ejecutada."
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"Reporta el tiempo consumido por la ejecución de la tubería.\n"
+"    \n"
+"    Ejecuta la TUBER�A y muestra un resumen del tiempo real, el tiempo de\n"
+"    CPU del usuario, y el tiempo de CPU del sistema utilizado por\n"
+"    la ejecución de la TUBER�A cuando termina.\n"
+"    \n"
+"    Opciones:\n"
+"      -p\tmuestra el resumen de tiempos en el formato Posix transportable\n"
+"    \n"
+"    Estado de Salida:\n"
+"    El estado de devolución es el estado de devolución de la TUBER�A."
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Ejecuta órdenes en base a la coincidencia de patrones.\n"
+"    \n"
+"    Ejecuta ÓRDENES selectivamente basado en coincidencias de la PALABRA\n"
+"    con el PATRÓN. Se utiliza `|' para separar patrones múltiples.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve el estado de la última orden ejecutada."
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Ejecuta comandos en base a condicionales.\n"
+"    \n"
+"    Se ejecuta la lista `if ÓRDENES'.  Si su estado de salida es cero,\n"
+"    entonces se ejecuta la lista `then ÓRDENES`.  De otra forma, cada lista\n"
+"    `elif ÓRDENES' se ejecuta en su lugar, y si su estado de salida es "
+"cero,\n"
+"    se ejecuta la lista `then ÓRDENES' correspondiente y se completa la\n"
+"    orden if.  De otra forma, se ejecuta la lista `else ÓRDENES', si está\n"
+"    presente.  El estado de salida del bloque entero es el estado saliente\n"
+"    de la última orden ejecutada, o cero si ninguna condición resultó\n"
+"    verdadera.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve el estado de la última orden ejecutada."
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Ejecuta órdenes mientras una prueba sea correcta.\n"
+"    \n"
+"    Expande y ejecuta ÓRDENES mientras la orden final en las ÓRDENES\n"
+"    `while' tenga un estado de salida de cero.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve el estado de la última orden ejecutada."
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Ejecuta órdenes mientras una prueba sea correcta.\n"
+"    \n"
+"    Expande y ejecuta ÓRDENES mientras la orden final en las ÓRDENES\n"
+"    `until' tengan un estado de salida que no sea cero.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve el estado de la última orden ejecutada."
+
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"Crea un coproceso llamado NOMBRE.\n"
+"    \n"
+"    Ejecuta la ORDEN asíncronamente, con la salida y la entrada estándar\n"
+"    de la orden conectadas a través de una tubería a los descriptores\n"
+"    de fichero asignados a los índices 0 y 1 de una variable de matriz\n"
+"    NOMBRE en el shell en ejecución.  El nombre por defecto es\n"
+"    \"COPROC\".\n"
+"    \n"
+"    Estado de Salida:\n"
+"    La orden «coproc» devuelve un estado de salida de 0."
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"Define una función de shell.\n"
+"    \n"
+"    Crea una función de shell llamada NOMBRE.  Cuando se invoca como una\n"
+"    orden simple, NOMBRE ejecuta ORDENes en el contexto del shell\n"
+"    que lo llamó.  Cuando se invoca NOMBRE, los argumentos se pasan a la\n"
+"    función como $1...$n, y el nombre de la función está en $FUNCNAME.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto a menos que NOMBRE sea de sólo lectura."
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Agrupa órdenes como una unidad.\n"
+"    \n"
+"    Ejecuta un conjunto de órdenes en un grupo.  Esta es una\n"
+"    forma de redirigir un conjunto completo de órdenes.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve el estado de la última orden ejecutada."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"Reinicia el trabajo en primer plano.\n"
+"    \n"
+"    Equivalente al argumento IDTRABAJO de la orden `fg'.  Reinicia un\n"
+"    trabajo detenido o en segundo plano.  IDTRABAJO puede especificar\n"
+"    un nombre de trabajo o un número de trabajo.  Un `&' a continuación\n"
+"    de IDTRABAJO coloca a el trabajo en segundo plano, como si la\n"
+"    especificación del trabajo se hubiera proporcionado como\n"
+"    un argumento de `bg'.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve el estado del trabajo reiniciado."
+
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Evalúa una expresión aritmética.\n"
+"    \n"
+"    Se evalua la EXPRESIÓN de acuerdo a las reglas de evaluación\n"
+"    aritmética.  Equivalente a \"let EXPRESIÓN\".\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve 1 si la EXPRESIÓN evalúa a 0; devuelve 0 de otra manera."
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"Ejecuta una orden condicional.\n"
+"    \n"
+"    Devuelve un estado de 0 ó 1 dependiendo de la evaluación de la "
+"expresión\n"
+"    condicional EXPRESIÓN.  Las expresiones se componen de los mismos\n"
+"    elementos primarios usados por la orden interna `test', y se pueden\n"
+"    combinar usando los siguientes operadores:\n"
+"    \n"
+"      ( EXPRESIÓN )\tDevuelve el valor de la EXPRESIÓN\n"
+"      ! EXPRESIÓN\t\tVerdadero si la EXPRESIÓN es falsa; de otra forma es "
+"falso\n"
+"      EXPR1 && EXPR2\tVerdadero si EXPR1 y EXPR2 son verdaderos; de\n"
+"    \t\totra forma es falso\n"
+"    \tEXPR1 || EXPR2\tVerdadero si EXPR1 o EXPR2 es verdadero; de\n"
+"    \t\totra forma es falso\n"
+"    \n"
+"    Cuando se usan los operadores `==' y `!=', se usa la cadena a la\n"
+"    derecha del operador como un patrón y se realiza una coincidencia de\n"
+"    patrones.  Cuando se usa el operador `=~', la cadena a la derecha del\n"
+"    operador coincide como una expresión regular.\n"
+"    \n"
+"    Los operadores && y || no evalúan EXPR2 si EXPR1 es suficiente para\n"
+"    determinar el valor de una expresión.    \n"
+"    Estado de Salida:\n"
+"    0 o 1 dependiendo del valor de la EXPRESIÓN."
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"Nombres de variables de shell comunes y su uso.\n"
+"    \n"
+"    BASH_VERSION\tInformación de versión para este Bash.\n"
+"    CDPATH\tUna lista de directorios separada por dos puntos\n"
+"    \t\tpara buscar directorios dados como argumentos para `cd'.\n"
+"    GLOBIGNORE\tUna lista de patrones separada por dos puntos\n"
+"    \t\tque describe nombres de fichero a ignorar por la expansión\n"
+"    \t\tde rutas de nombre.\n"
+"    HISTFILE\tEl nombre del fichero donde se almacena su historia\n"
+"    \t\tde órdenes.\n"
+"    HISTFILESIZE\t El número máximo de líneas que puede contener\n"
+"    \t\teste fichero.\n"
+"    HISTSIZE\t El número máximo de líneas de historia que un shell\n"
+"    \t\ten ejecución puede acceder.\n"
+"    HOME\tLa ruta completa a su directorio de entrada.\n"
+"    HOSTNAME\tEl nombre del anfitrión actual.\n"
+"    HOSTTYPE\tEl tipo de CPU bajo el cual se ejecuta esta versión\n"
+"    \t\tde Bash.\n"
+"    IGNOREEOF\tControla la acción del shell al recibir un carácter\n"
+"    \t\tFDL como la única entrada.  Si está definida, entonces su\n"
+"    \t\tvalor es el número de caracteres FDL que se deben leer de\n"
+"    \t\tforma consecutiva en una línea vacía antes de que el shell\n"
+"    \t\ttermine (por defecto 10).  Cuando no está definida, EOF\n"
+"    \t\tsignifica el fin de la entrada.\n"
+"    MACHTYPE\tUna cadena que describe el sistema actual donde se\n"
+"    \t\tejecuta Bash.\n"
+"    MAILCHECK\tLa frecuencia, en segundos, que Bash busca correo nuevo.\n"
+"    MAILPATH\tUna lista de nombres de ficheros separada por dos puntos\n"
+"    \t\ten la cual Bash busca correo nuevo.\n"
+"    OSTYPE\tla versión de Unix en la que se ejecuta esta versión\n"
+"    \t\tde Bash.\n"
+"    PATH\tUna lista de directorios separada por dos puntos en la que\n"
+"    \t\tse buscan órdenes.\n"
+"    PROMPT_COMMAND\tUna orden a ejecutar antes de mostrar cada prompt\n"
+"    \t\tprimario.\n"
+"    PS1\t\tLa cadena primaria de prompt.\n"
+"    PS2\t\tLa cadena secundaria de prompt.\n"
+"    PWD\t\tLa ruta completa del directorio actual.\n"
+"    SHELLOPTS\tUna lista separada por dos puntos de las opciones\n"
+"    \t\tde shell activadas.\n"
+"    TERM\tEl nombre del tipo actual de terminal.\n"
+"    TIMEFORMAT\tEl formato de salida para las estadísticas de tiempo\n"
+"    \t\tmostradas por la palabra reservada `time'.\n"
+"    auto_resume\tSi no es nulo significa que una palabra de orden\n"
+"    \t\tque aparece en una línea por sí sola se busca primero en la lista\n"
+"    \t\tactual de trabajos detenidos.  Si se encuentra ahí, esetrabajo\n"
+"    \t\tse coloca en primer plano.  Un valor `exact' significa que la\n"
+"    \t\tpalabra de orden debe coincidir exactamente con una\n"
+"    \t\torden de la lista de trabajos detenidos.  Un valor\n"
+"    \t\t`substring' significa que la palabra de orden debe coincidir\n"
+"    \t\tcon una subcadena del trabajo.  Cualquier otro valor significa\n"
+"    \t\tque la orden debe ser un prefijo de un trabajo detenido.\n"
+"    histchars\tLos caracteres que controlan la expansión de historia\n"
+"    \t\ty la sustitución rápida.  El primer carácter es el carácter de\n"
+"    \t\tsustitución de historia, generalmente `!'.  El segundo es el\n"
+"    \t\tcarácter de `sustitución rápida', generalmente `^'.  El tercero\n"
+" \n"
+"    \t\tes el carácter `comentario de historia', generalmente `#'.\n"
+"    HISTIGNORE\tUna lista separada por dos puntos de patrones\n"
+"    \t\tutilizados para decidir qué órdenes se deben guardar en\n"
+"    \t\tel listado histórico.\n"
+
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Agrega directorios a la pila.\n"
+"    \n"
+"    Agrega un directorio por la parte superior de la pila de directorios\n"
+"    o rota la pila, haciendo que el nuevo elemento superior de la pila sea "
+"el\n"
+"    directorio de trabajo actual.  Sin argumentos, intercambia\n"
+"    los dos directorios de la parte superior.\n"
+"    \n"
+"    Opciones:\n"
+"      -n\tsuprime el cambio normal de directorio cuando se agregan\n"
+"    \t\tdirectorios a la pila, así sólo se manipula la pila.\n"
+"    \n"
+"    Argumentos:\n"
+"      +N\tRota la pila para que el N-ésimo directorio (contando\n"
+"    \t\tdesde la izquierda de la lista mostrada por `dirs', comenzando\n"
+"    \t\tdesde cero) esté en la parte superior.\n"
+"    \n"
+"      -N\tRota la pila para que el N-ésimo directorio (contando desde\n"
+"    \t\tla derecha de la lista mostrada por `dirs', comenzando\n"
+"    \t\tdesde cero) esté en la parte superior.\n"
+"    \n"
+"      dir\tAgrega DIR la pila de directorios por la parte superior, "
+"haciendo\n"
+"    \t\tde él el nuevo directorio de trabajo actual.\n"
+"    \n"
+"    La orden interna `dirs' muestra la pila de directorios.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto a menos que se proporcione un argumento\n"
+"    inválido o falle el cambio de directorio."
+
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Borra directorios de la pila.\n"
+"    \n"
+"    Borra entradas de la pila de directorios.  Sin argumentos,\n"
+"    borra el directorio del tope de la pila, y cambia al nuevo\n"
+"    directorio tope.\n"
+"    \n"
+"    Opciones:\n"
+"      -n\tSuprime el cambio normal de directorio cuando se borran\n"
+"    \t\tdirectorios de la pila; así sólo se manipula la pila.\n"
+"    \n"
+"    Argumentos:\n"
+"    \n"
+"      +N\tBorra la N-ésima entrada contando desde la izquierda de\n"
+"    \t\tla lista mostrada por `dirs', comenzando por cero. Por\n"
+"    \t\tejemplo: `popd +0' borra el primer directorio, `popd +1'\n"
+"    \t\tel segundo.\n"
+"    \n"
+"      -N\tBorra la N-ésima entrada contando desde la derecha de\n"
+"    \t\tla lista mostrada por `dirs', comenzando por cero. Por\n"
+"    \t\tejemplo: `popd -0' borra el último directorio, `popd -1'\n"
+"    \t\tel penúltimo.\n"
+"    \n"
+"    La orden interna `dirs' muestra la pila de directorios.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto a menos que se proporcione un\n"
+"    argumento inválido o falle el cambio de directorio."
+
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Muestra la pila de directorios.\n"
+"    \n"
+"    Muestra la lista de directorios actualmente grabados.  Los directorios\n"
+"    se guardan en la lista con la orden `pushd'; pueden ir saliendo de\n"
+"    la lista con la orden `popd'.\n"
+"    \n"
+"    Opciones:\n"
+"      -c\tlimpia la pila de directorios, eliminando todos sus elementos.\n"
+"      -l\tno muestra versiones con prefijo de tilde de los directorios\n"
+"    \t\trelativos a su directorio inicial.\n"
+"      -p\tmuestra la pila de directorios con una entrada por línea\n"
+"      -v\tmuestra la pila de directorios con una entrada por línea con\n"
+"    \t\tsu posición en la pila como prefijo\n"
+"    \n"
+"    Argumentos:\n"
+"      +N\tmuestra la N-ésima entrada contando desde\n"
+"    \t\tla izquierda de la lista mostrada por dirs cuando se invoca sin\n"
+"    \t\topciones, empezando de cero.\n"
+"    \n"
+"      -N\tmuestra la N-ésima entrada contando desde la izquierda de la\n"
+"    \t\tlista mostrada por dirs cuando se invoca sin opciones, empezando\n"
+"    \t\tdesde cero.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto, a menos que se proporcione una opción inválida o\n"
+"    suceda un error."
+
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"Activa y desactiva opciones de shell.\n"
+"    \n"
+"    Cambia la configuración de cada opción de shell NOMBRE_OPCIÓN. Sin\n"
+"    ninguna opción como argumento, muestra cada NOMBRE_OPCIÓN\n"
+"    proporcionado o todas las opciones de shell si no se especifica\n"
+"    ningún NOMBRE_OPCIÓN, con una indicación de si está activa o no\n"
+"    cada una.\n"
+"    \n"
+"    Opciones:\n"
+"      -o\trestringe NOMBRE_OPCIÓN a aquellos definidos con `set -o'\n"
+"      -p\tmuestra cada opción de shell con un indicador de su estado\n"
+"      -q\tsuprime la salida\n"
+"      -s\tactiva (establece) cada NOMBRE_OPCIÓN\n"
+"      -u\tdesactiva (borra) cada NOMBRE_OPCIÓN\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto si se activa NOMBRE_OPCIÓN; falla si se proporciona\n"
+"    una opción inválida o NOMBRE_OPCIÓN está desactivado."
+
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"Da formato y muestra ARGUMENTOS bajo el control del FORMATO.\n"
+"    \n"
+"    Opciones:\n"
+"      -v var\tasigna la salida a la variable de shell VAR en lugar\n"
+"    \t\tde mostrarla en la salida estándar\n"
+"    \n"
+"    FORMATO es una cadena de caracteres la cual contiene tres tipos de\n"
+"    objetos: caracteres simples, los cuales solamente se copian a la salida\n"
+"    salida estándar; secuencias de escape de caracteres, las cuales\n"
+"    se convierten y se copian a la salida estándar; y especificaciones de\n"
+"    formato, cada una de las cuales causa la muestra del siguiente "
+"argumento\n"
+"    consecutivo.\n"
+"    \n"
+"    Además de las especificaciones de formato estándar descritas en\n"
+"    printf(1) y printf(3), printf interpreta:\n"
+"    \n"
+"      %b\texpande las secuencias de escape de barra invertida en\n"
+"            el argumento correspondiente\n"
+"      %q\tcita el argumento de tal forma que se pueda reutilizar como\n"
+"            entrada del shell.\n"
+"      %(fmt)T muestra la cadena fecha hora resultante de usar FMT como\n"
+"            una cadena de formato para strftime(3)\n"
+"    \n"
+"    El formato se reutiliza según sea necesario para consumir todos los\n"
+"    argumentos.  Si hay menos argumentos de los que el formato requiere,\n"
+"    las especificaciones de formato adicionales se comportan como si un "
+"valor\n"
+"    cero o una cadena nula, lo que sea apropiado, se hubiera proporcionado.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto a menos que se proporcione una opción inválida o\n"
+"    suceda un error de escritura o de asignación."
+
+#: builtins.c:1971
+#, fuzzy
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Especifica cuántos argumentos deben ser completados por Readline.\n"
+"    \n"
+"    Por cada NOMBRE, especifica cuántos argumentos se deben completar.  Si\n"
+"    no se proporcionan opciones, se muestran las especificaciones de\n"
+"    completado existentes en una forma que permite que se reusen como "
+"entrada.\n"
+"    \n"
+"    Opciones:\n"
+"      -p\tmuestra las especificaciones de completado existentes en formato\n"
+"    \t\treusable\n"
+"      -r\tborra una especificación de completado para cada NOMBRE o,\n"
+"    \t\tsi no se proporcionan NOMBREs, todas las especificaciones\n"
+"    \t\tde completado\n"
+"      -D\taplica los completados y acciones por defecto para las órdenes\n"
+"    \t\tsin ninguna especificación de completado definida\n"
+"      -E\taplica los completados y acciones para órdenes \"vacías\" --\n"
+"    \t\tcuando se intenta completar en una línea en blanco\n"
+"      -I\taplica los completados a acciones a la palabra incial "
+"(habitualmente\n"
+"    \t\tla orden)\n"
+"    \n"
+"    Cuando se intenta el completado, las acciones se aplican en el orden\n"
+"    en que se listan las opciones de letra mayúscula antes indicadas.  Si "
+"se\n"
+"    proporcionan varias opciones, la opción -D tiene precedencia sobre -E "
+"y,\n"
+"    ambas, sobre -I.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto a menos que se proporcione una opción inválida o\n"
+"    suceda un error."
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Muestra los posibles complementos dependiendo de las opciones.\n"
+"    \n"
+"    Sirve para usarse desde una función de shell que genere complementos\n"
+"    posibles.  Si se proporciona el argumento opcional PALABRA, se generan\n"
+"    las coincidencias contra PALABRA.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto a menos que se proporcione una opción inválida o\n"
+"    suceda un error."
+
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"Modifica o muestra las opciones de completado.\n"
+"    \n"
+"    Modifica las opciones de completado para cada NOMBRE, o, si no se\n"
+"    proporcionan NOMBREs, el completado actualmente en ejecución.  Si no\n"
+"    se proporcionan OPCIONes, muestra las opciones de completado para\n"
+"    cada NOMBRE o la especificación de completado actual.\n"
+"    \n"
+"    Opciones:\n"
+"    \t-o opción\tEstablece la opción de completado OPCIÓN para cada NOMBRE\n"
+"    \t-D\t\tCambia las opciones para el completado de orden \"por defecto\"\n"
+"    \t-E\t\tCambia las opciones para el completado de orden \"vacía\"\n"
+"    \t-I\t\tCambia las opciones para el completado en la palabra inicial\n"
+"    \n"
+"    Si se usa `+o' en lugar de `-o', desactiva la opción especificada.\n"
+"    \n"
+"    Argumentos:\n"
+"    \n"
+"    Cada NOMBRE se refiere a una orden para la cual se definió previamente\n"
+"    una especificación de completado usando la orden interna `complete'.\n"
+"    Si no se proporcionan NOMBREs, se debe llamar a ‘compopt’ desde una\n"
+"    función que genere completados actualmente y se modifican las opciones\n"
+"    para ese generador de completados actualmente en ejecución.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto a menos que se proporcione una opción inválida o\n"
+"    NOMBRE no tenga una especificación de completado definida."
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"Lee líneas de un fichero y las guarda en una variable de matriz indexada.\n"
+"    \n"
+"    Lee líneas de la entrada estándar y las guarda en la variable de matriz\n"
+"    indexada MATRIZ, o desde el descriptor de fichero DF si se proporciona\n"
+"    la opción -u.  La variable MAPFILE es la MATRIZ por defecto.\n"
+"    \n"
+"    Opciones:\n"
+"      -d delim\tUtiliza DELIM para finalizar las líneas en lugar de nueva "
+"línea\n"
+"      -n cuenta\tCopia hasta CUENTA líneas.  Si CUENTA es 0, se copian "
+"todas\n"
+"      -O origen\tComienza a asignar a MATRIZ en el índice ORIGEN.  El\n"
+"    \t\t\tíndice por defecto es 0.\n"
+"      -s cuenta\tDescarta las primeras CUENTA líneas leídas.\n"
+"      -t\tBorra el DELIM final de cada línea leída (nueva línea por "
+"defecto).\n"
+"      -u df\tLee líneas del descriptor de fichero DF en lugar de la\n"
+"    \t\t\tentrada estándar.\n"
+"      -C llamada\tEvalúa LLAMADA cada vez que se leen QUANTUM líneas.\n"
+"      -c quantum\tEspecifica el número de líneas a leer entre cada\n"
+"    \t\t\tllamada a LLAMADA.\n"
+"    \n"
+"    Argumentos:\n"
+"      MATRIZ\tNombre de variable de matriz a usar para guardar datos.\n"
+"    \n"
+"    Si se proporciona -C sin -c, el quantum por defecto es 5000.  Cuando\n"
+"    se evalúa LLAMADA, se proporciona el índice del siguiente elemento\n"
+"    de la matriz a asignar como un argumento adicional.\n"
+"    \n"
+"    Si no se proporciona un origen explícito, mapfile borrará la MATRIZ\n"
+"    antes de usarla para asignación.\n"
+"    \n"
+"    Estado de Salida:\n"
+"    Devuelve correcto a menos que se proporcione una opción inválida o\n"
+"    la MATRIZ sea de sólo lectura o no sea una matriz indexada."
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Lee líneas de un fichero en una variable de matriz.\n"
+"    \n"
+"    Sinónimo de `mapfile'."
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "Devuelve el contexto de la llamada a subrutina actual.\n"
+#~ "    \n"
+#~ "    Sin EXPR, devuelve "
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process: el proceso %5ld (%s) en the_pipeline"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "Señal Desconocida #"
diff --git a/po/et.gmo b/po/et.gmo
new file mode 100644
index 0000000..c018125
--- /dev/null
+++ b/po/et.gmo
diff --git a/po/et.po b/po/et.po
new file mode 100644
index 0000000..58f0e27
--- /dev/null
+++ b/po/et.po
@@ -0,0 +1,4277 @@
+# Estonian translations for GNU bash.
+# Copyright (C) 2001 Free Software Foundation, Inc.
+# Toomas Soome <Toomas.Soome@microlink.ee>, 2006.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: bash 3.2\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2006-11-11 16:38+0200\n"
+"Last-Translator: Toomas Soome <Toomas.Soome@microlink.ee>\n"
+"Language-Team: Estonian <et@li.org>\n"
+"Language: et\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-15\n"
+"Content-Transfer-Encoding: 8-bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "vigane massiivi indeks"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr ""
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr ""
+
+#: arrayfunc.c:700
+#, fuzzy, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: vigane tegevuse nimi"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: mitte-numbrilisele indeksile ei saa omistada"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr ""
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: ei saa luua: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr ""
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: esimine mitte-tühemik sümbol pole `\"'"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "sulgev `%c' puudub %s sees"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: puudub eraldav koolon"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "`%s': ei saa lahti siduda"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr ""
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr ""
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr ""
+
+#: builtins/alias.def:131 variables.c:1844
+#, fuzzy, c-format
+msgid "`%s': invalid alias name"
+msgstr "%s: vigane tegevuse nimi"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr ""
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr ""
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: ei saa lugeda: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "`%s': tundmatu funktsiooni nimi"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s ei ole seotud ühegi klahviga.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s saab kasutada läbi "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "`%s': ei saa lahti siduda"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr ""
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "omab mõtet ainult `for', `while' või `until' tsüklis"
+
+#: builtins/caller.def:136
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "HOME pole seatud"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "liiga palju argumente"
+
+#: builtins/cd.def:342
+#, fuzzy
+msgid "null directory"
+msgstr "teist kataloogi pole"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "OLDPWD pole seatud"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr ""
+
+#: builtins/common.c:134 error.c:264
+#, fuzzy, c-format
+msgid "warning: "
+msgstr "%s: hoiatus: "
+
+#: builtins/common.c:148
+#, fuzzy, c-format
+msgid "%s: usage: "
+msgstr "%s: hoiatus: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: võti nõuab argumenti"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: nõutakse numbrilist argumenti"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: ei leitud"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: vigane võti"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: vigane võtme nimi"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "`%s': ei ole lubatud identifikaator"
+
+#: builtins/common.c:240
+#, fuzzy
+msgid "invalid octal number"
+msgstr "vigane signaali number"
+
+#: builtins/common.c:242
+#, fuzzy
+msgid "invalid hex number"
+msgstr "vigane number"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "vigane number"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: vigane signaali spetsifikatsioon"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "`%s': ei ole pid ega korrektne töö spetsifikatsioon"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: mittemuudetav muutuja"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s on piiridest väljas"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "argument"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s on piiridest väljas"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: sellist tööd pole"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: töökontroll puudub"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "töökontroll puudub"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: piiratud"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "piiratud"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: ei ole sisekäsk"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "kirjutamise viga: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr ""
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr ""
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr ""
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: segane töö"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr ""
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: ei saa eemaldada: %s on ainult lugemiseks"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: ei saa eemaldada"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: vigane tegevuse nimi"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr ""
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "hoiatus: võti -F ei pruugi töötada nagu te ootate"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "hoiatus: võti -C ei pruugi töötada nagu te ootate"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr ""
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "saab kasutada ainult funktsioonis"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr ""
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr ""
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr ""
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr ""
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "võtit `-f' ei saa funktsiooni loomiseks kasutada"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: funktsioon ei ole muudetav"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr ""
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: masiivi muutujaid ei saa nii kustutada"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr ""
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "dünaamilist laadimist et saa kasutada"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "jagatud objekti %s ei saa avada: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "%s puudub jagatud objektis %s: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: pole dünaamiliselt laetud"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr ""
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: pole dünaamiliselt laetud"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: ei saa kustutada: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: on kataloog"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: ei ole tavaline fail"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: fail on liiga suur"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: kahendfaili ei õnnestu käivitada"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: ei saa käivitada: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr ""
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "pole login shell: kasutage `exit'"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Teil on peatatud töid.\n"
+
+#: builtins/exit.def:123
+#, fuzzy, c-format
+msgid "There are running jobs.\n"
+msgstr "Teil on peatatud töid.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "käsku ei ole"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr ""
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: ajutist faili ei saa avada: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr ""
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr ""
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: lubamatu võti -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: võti nõuab argumenti -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr ""
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr ""
+
+#: builtins/hash.def:267
+#, fuzzy, c-format
+msgid "hits\tcommand\n"
+msgstr "viimane käsklus: %s\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] ""
+msgstr[1] ""
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: ei saa avada: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr ""
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr ""
+
+#: builtins/history.def:340
+#, fuzzy, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: vigane võtme nimi"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr ""
+
+#: builtins/inlib.def:71
+#, fuzzy, c-format
+msgid "%s: inlib failed"
+msgstr "%s: vigane teenus"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr ""
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr ""
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Tundmatu viga"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "oodati avaldist"
+
+#: builtins/mapfile.def:178
+#, fuzzy, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: pole massiiv"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr ""
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr ""
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, fuzzy, c-format
+msgid "%s: invalid line count"
+msgstr "%s: vigane võti"
+
+#: builtins/mapfile.def:299
+#, fuzzy, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: vigane võti"
+
+#: builtins/mapfile.def:316
+#, fuzzy, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: vigane tegevuse nimi"
+
+#: builtins/mapfile.def:349
+#, fuzzy
+msgid "empty array variable name"
+msgstr "%s: pole massiiv"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr ""
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr ""
+
+#: builtins/printf.def:474
+#, fuzzy, c-format
+msgid "`%c': invalid time format specification"
+msgstr "%s: vigane signaali spetsifikatsioon"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr ""
+
+#: builtins/printf.def:702
+#, fuzzy, c-format
+msgid "warning: %s: %s"
+msgstr "%s: hoiatus: "
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr ""
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr ""
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr ""
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "teist kataloogi pole"
+
+#: builtins/pushd.def:360
+#, fuzzy, c-format
+msgid "%s: invalid argument"
+msgstr "%s: vigane number"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<jooksev kataloog puudub>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr ""
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr ""
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr ""
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "viga lugemisel: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr ""
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr ""
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: pole massiiv"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: ei ole funktsioon"
+
+#: builtins/setattr.def:194
+#, fuzzy, c-format
+msgid "%s: cannot export"
+msgstr "%s: ei saa eemaldada"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "shift arv"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr ""
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr ""
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr ""
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: faili ei ole"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "peatamine ei õnnestu"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "login shelli ei saa peatada"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr ""
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s on shelli võtmesõna\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s: on funktsioon\n"
+
+#: builtins/type.def:299
+#, fuzzy, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s on shelli sisekäsk\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s on shelli sisekäsk\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s on %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr ""
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr ""
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "`%c': halb käsklus"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: ei õnnestu lugeda piirangut: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr ""
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: ei õnnestu muuta piirangut: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "kaheksandnumber"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr ""
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr ""
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr ""
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "viimane käsklus: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Katkestan..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr ""
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "tundmatu viga käsus"
+
+#: error.c:463
+msgid "bad command type"
+msgstr ""
+
+#: error.c:464
+msgid "bad connector"
+msgstr ""
+
+#: error.c:465
+msgid "bad jump"
+msgstr ""
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: sidumata muutuja"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr ""
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr ""
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr ""
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr ""
+
+#: execute_cmd.c:2486
+#, fuzzy
+msgid "pipe error"
+msgstr "kirjutamise viga: %s"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: piiratud: käskudes ei saa kasutada sümboleid `/'"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: käsku ei ole"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr ""
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: halb interpretaator"
+
+#: execute_cmd.c:5891
+#, fuzzy, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: kahendfaili ei õnnestu käivitada"
+
+#: execute_cmd.c:5977
+#, fuzzy, c-format
+msgid "`%s': is a special builtin"
+msgstr "%s on shelli sisekäsk\n"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr ""
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "avaldise rekursioon on liiga sügav"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr ""
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "süntaksi viga avaldises"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "üritati omistada mitte-muutujale"
+
+#: expr.c:530
+#, fuzzy
+msgid "syntax error in variable assignment"
+msgstr "süntaksi viga avaldises"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "nulliga jagamine"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr ""
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr ""
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "eksponent on väiksem kui 0"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr ""
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "puudub `)'"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "süntaksi viga: oodati operandi"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "süntaksi viga: vigane aritmeetiline operaator"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr ""
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "vigane aritmeetiline baas"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: vigane võti"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "väärtus on baasiks liiga suur"
+
+#: expr.c:1647
+#, fuzzy, c-format
+msgid "%s: expression error\n"
+msgstr "%s: oodati täisarvude avaldist"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: vanemkataloogidele ei ole juurdepääsu"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr ""
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr ""
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr ""
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr ""
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr ""
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr ""
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr ""
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: pid puudub"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr ""
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr ""
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr ""
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr ""
+
+#: jobs.c:1892
+msgid "Running"
+msgstr ""
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr ""
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr ""
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr ""
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr ""
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr ""
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr ""
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr ""
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr ""
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: töö %d on peatatud"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: sellist tööd pole"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: töö on lõpetatud"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: töö %d on juba taustal"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr ""
+
+#: jobs.c:4320
+#, fuzzy, c-format
+msgid "%s: line %d: "
+msgstr "%s: hoiatus: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr ""
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr ""
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr ""
+
+#: jobs.c:4447
+msgid "initialize_job_control: no job control in background"
+msgstr ""
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr ""
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr ""
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr ""
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr ""
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr ""
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+#, fuzzy
+msgid "unknown"
+msgstr "%s: tundmatu masin"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr ""
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr ""
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr ""
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr ""
+
+#: lib/malloc/malloc.c:1001
+msgid "free: underflow detected; magic8 corrupted"
+msgstr ""
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr ""
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr ""
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr ""
+
+#: lib/malloc/malloc.c:1141
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr ""
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr ""
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr ""
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr ""
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr ""
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "vigane baas"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: tundmatu masin"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: vigane teenus"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr ""
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr ""
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr ""
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr ""
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr ""
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr ""
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "Teil on kiri kaustas $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "Teil on uus kiri kaustas $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "Kiri kaustas %s on loetud\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "süntaksi viga: nõutakse aritmeetilist avaldist"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "süntaksi viga: ootamatu `;'"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "süntaksi viga: `((%s))'"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr ""
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr ""
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr ""
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr ""
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr ""
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr ""
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr ""
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "süntaksi viga tingimuslikus avaldises"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "ootamatu märk `%s', oodati `)'"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "oodati `)'"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr ""
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr ""
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr ""
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr ""
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr ""
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr ""
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr ""
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr ""
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr ""
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr ""
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "süntaksi viga kohal `%s'"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "süntaksi viga: ootamatu faililõpp"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "süntaksi viga"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Käsuinterpretaatorist väljumiseks kasutage \"%s\".\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr ""
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr ""
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr ""
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr ""
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr ""
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr ""
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr ""
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr ""
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr ""
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "faili deskriptor on piiridest väljas"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: segane ümbersuunamine"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: fail on olemas, ei kirjuta üle"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: piiratud: väljundit ei saa ümber suunata"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr ""
+
+#: redir.c:222
+#, fuzzy, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "$%s: sedasi ei saa omistada"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr ""
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "viga ümbersuunamisel: fd duplikaadi loomine ei õnnestu"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "/tmp puudub, palun looge see!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp peab olema kataloogi nimi"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr ""
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: vigane võti"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr ""
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr ""
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr ""
+
+#: shell.c:1632
+#, fuzzy, c-format
+msgid "%s: Is a directory"
+msgstr "%s: on kataloog"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "Mul ei ole nime!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr ""
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Kasuta:\t%s [GNU pikk võti] [võti] ...\n"
+"\t%s [GNU pikk võti] [võti] skript-fail ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "GNU pikad võtmed:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Käsuinterpretaatori võtmed:\n"
+
+#: shell.c:2043
+#, fuzzy
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-irsD või -c käsklus või -O lühivõti\t\t(ainult käivitamine)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s või -o võti\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr ""
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "Vigadest teatamiseks kasutage käsku `bashbug'.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr ""
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr ""
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: vigane operatsioon"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr ""
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr ""
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr ""
+
+#: siglist.c:58
+msgid "Quit"
+msgstr ""
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr ""
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr ""
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr ""
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr ""
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr ""
+
+#: siglist.c:86
+msgid "Killed"
+msgstr ""
+
+#: siglist.c:90
+#, fuzzy
+msgid "Bus error"
+msgstr "süntaksi viga"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr ""
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr ""
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr ""
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr ""
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr ""
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr ""
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr ""
+
+#: siglist.c:126
+msgid "Continue"
+msgstr ""
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr ""
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr ""
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr ""
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr ""
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr ""
+
+#: siglist.c:154
+msgid "File limit"
+msgstr ""
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr ""
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr ""
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr ""
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr ""
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr ""
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr ""
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr ""
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr ""
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr ""
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr ""
+
+#: siglist.c:198
+msgid "programming error"
+msgstr ""
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr ""
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr ""
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr ""
+
+#: siglist.c:214
+msgid "Information request"
+msgstr ""
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr ""
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr ""
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr ""
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr ""
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr ""
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr ""
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr ""
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr ""
+
+#: subst.c:6213
+msgid "command substitution: ignored null byte in input"
+msgstr ""
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr ""
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr ""
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr ""
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr ""
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, fuzzy, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: vigane võti"
+
+#: subst.c:7013 subst.c:7177
+#, fuzzy, c-format
+msgid "%s: invalid variable name"
+msgstr "%s: vigane tegevuse nimi"
+
+#: subst.c:7256
+#, fuzzy, c-format
+msgid "%s: parameter not set"
+msgstr "%s: parameeter on null või pole seatud"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: parameeter on null või pole seatud"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr ""
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: halb asendus"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: sedasi ei saa omistada"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+
+#: subst.c:10367
+#, fuzzy, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "sulgev `%c' puudub %s sees"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "ei leitud: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "oodati argumenti"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: oodati täisarvude avaldist"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "oodati `)'"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "oodati `)', saadi %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: eeldati binaarset operaatorit"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: eeldati unaarset operaatorit"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "puudub `]'"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "süntaksi viga: ootamatu `;'"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "vigane signaali number"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr ""
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: halb väärtus muutujas trap_list[%d]: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps: signaali käsitleja on SIG_DFL, saadan %d (%s) iseendale"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: vigane signaal %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr ""
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "shelli tase (%d) on liiga kõrge, kasutan väärtust 1"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: praegune skoop pole funktsiooni kontekst"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr ""
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr ""
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: praegune skoop pole funktsiooni kontekst"
+
+#: variables.c:4771
+#, fuzzy, c-format
+msgid "%s has null exportstr"
+msgstr "%s: parameeter on null või pole seatud"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr ""
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr ""
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr ""
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: pole global_variables kontekst"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr ""
+
+#: variables.c:6387
+#, fuzzy, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: ei saa avada: %s"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr ""
+
+#: variables.c:6437
+#, fuzzy, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s on piiridest väljas"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Autoriõigus © 2006 Free Software Foundation, Inc.\n"
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr ""
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr ""
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr ""
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr ""
+
+#: xmalloc.c:95
+#, fuzzy, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: ei saa luua: %s"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr ""
+
+#: xmalloc.c:167
+#, fuzzy, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: ei saa luua: %s"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr ""
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr ""
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr ""
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr ""
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr ""
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr ""
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr ""
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr ""
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr ""
+
+#: builtins.c:78
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr ""
+
+#: builtins.c:80
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr ""
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr ""
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr ""
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr ""
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr ""
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr ""
+
+#: builtins.c:96
+msgid "getopts optstring name [arg ...]"
+msgstr ""
+
+#: builtins.c:98
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr ""
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr ""
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr ""
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr ""
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr ""
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr ""
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr ""
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr ""
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr ""
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr ""
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr ""
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr ""
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr ""
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr ""
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr ""
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr ""
+
+#: builtins.c:150
+#, fuzzy
+msgid "shift [n]"
+msgstr "shift arv"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr ""
+
+#: builtins.c:154
+#, fuzzy
+msgid ". filename [arguments]"
+msgstr "liiga palju argumente"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr ""
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr ""
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr ""
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr ""
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr ""
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr ""
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr ""
+
+#: builtins.c:177
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr ""
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr ""
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr ""
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr ""
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr ""
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr ""
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr ""
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr ""
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr ""
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr ""
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr ""
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr ""
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr ""
+
+#: builtins.c:208
+#, fuzzy
+msgid "(( expression ))"
+msgstr "oodati avaldist"
+
+#: builtins.c:210
+#, fuzzy
+msgid "[[ expression ]]"
+msgstr "oodati avaldist"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr ""
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr ""
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr ""
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr ""
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr ""
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr ""
+
+#: builtins.c:231
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+
+#: builtins.c:235
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+
+#: builtins.c:239
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr ""
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+
+#: builtins.c:244
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+
+#: builtins.c:354
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+
+#: builtins.c:490
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+
+#: builtins.c:557
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+
+#: builtins.c:652
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+
+#: builtins.c:1431
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+
+#: builtins.c:1502
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+
+#: builtins.c:1726
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+
+#: builtins.c:1971
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+
+#, fuzzy
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr "Tagastab jooksva alamprotseduuri konteksti."
+
+#~ msgid " "
+#~ msgstr " "
+
+#~ msgid "freed"
+#~ msgstr "vabastatud"
diff --git a/po/fi.gmo b/po/fi.gmo
new file mode 100644
index 0000000..31ddbe4
--- /dev/null
+++ b/po/fi.gmo
diff --git a/po/fi.po b/po/fi.po
new file mode 100644
index 0000000..6d13f2d
--- /dev/null
+++ b/po/fi.po
@@ -0,0 +1,5898 @@
+# Finnish translation for bash-4.0
+# Copyright (C) 2009 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash-4.0 package.
+#
+# Pekka Niemi, 2009.
+# Pekka Niemi <pekka.niemi@iki.fi>, 2009.
+# $Id: bash-4.0.fi.po 38 2009-05-09 12:21:42Z pen $ 
+msgid ""
+msgstr ""
+"Project-Id-Version: bash-4.0\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2009-05-09 15:13+0300\n"
+"Last-Translator: Pekka Niemi <pekka.niemi@iki.fi>\n"
+"Language-Team: Finnish <translation-team-fi@lists.sourceforge.net>\n"
+"Language: fi\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=utf-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"X-Generator: Lokalize 0.3\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "virheellinen taulukkoindeksi"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr ""
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: indeksoitua taulukkoa ei voi muuttaa assosiatiiviseksi"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: virheellinen assosiatiivinen indeksi"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: ei voida sijoittaa epänumeeriseen indeksiin"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr ""
+"%s: %s: assosiatiiviseen taulukkoon sijoitettaessa täytyy käyttää "
+"avainindeksiä"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: ei voida luoda: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr "bash_execute_unix_command: komennolle ei löydy näppäinkarttaa"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: ensimmäinen ei-tyhjä merkki ei ole �\"�"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "ei loppumerkkiä �%c� rivissä %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: puuttuva kaksoispiste-erotin"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "�%s�: ei voida irrottaa"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr ""
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr ""
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr ""
+
+#: builtins/alias.def:131 variables.c:1844
+#, fuzzy, c-format
+msgid "`%s': invalid alias name"
+msgstr "�%s�: virheellinen näppäinkartan nimi"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "rivieditointi ei ole käytössä"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "�%s�: virheellinen näppäinkartan nimi"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: ei voida lukea: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "�%s�: tuntematon funktio"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s ei ole sidottu mihinkään näppäimeen.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s voidaan käynnistää näppäinkomennolla "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "�%s�: ei voida irrottaa"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "toistolaskuri"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "voidaan käyttää vain �for�-, �while�- tai �until�-silmukoissa"
+
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Palauta tämänhetkisen alirutiinikutsun konteksti.\n"
+"    \n"
+"    Ilman parametria, palauttaa �$line $filename�. Parametrilla palauttaa \n"
+"    �$line $subroutine $filename�; saatua lisätietoa voidaan käyttää "
+"kutsupinon\n"
+"    kuvaamiseksi.\n"
+"    \n"
+"    Parametrin arvo määrää, montako kutsukehystä taaksepäin siirrytään; \n"
+"    ylin kehys on numero 0.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa 0 ellei komentotulkki ole funktion ulkopuolella tai parametri\n"
+"    on virheellinen."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "HOME-ympäristömuuttujaa ei ole asetettu"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "liian monta argumenttia"
+
+#: builtins/cd.def:342
+#, fuzzy
+msgid "null directory"
+msgstr "ei toista hakemistoa"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "OLDPWD-ympäristömuuttujaa ei ole asetettu"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "rivi %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "varoitus: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: käyttö: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: valitsin vaatii argumentin"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: vaaditaan numeerinen argumentti"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: ei löytynyt"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: virheellinen valitsin"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: virheellinen valitsimen nimi"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "�%s�: virheellinen tunniste"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "virheellinen oktaaliluku"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "virheellinen heksadesimaaliluku"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "virheellinen luku"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: virheellinen signaalimääritys"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "�%s�: ei ole prosessitunnus eikä kelvollinen työtunniste"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: kirjoitussuojattu muuttuja"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s rajojen ulkopuolella"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "argumentti"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s rajojen ulkopuolella"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: työtä ei löydy"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: ei työnohjausta"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "ei työnohjausta"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: rajoitettu"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "rajoitettu"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: ei ole komentotulkin sisäänrakennettu komento"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "kirjoitusvirhe: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "pääteasetuksia asetettaessa tapahtui virhe: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "pääteasetuksia luettaessa tapahtui virhe: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: nykyhakemistoa luettaessa tapahtui virhe: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: ei ole yksiselitteinen työtunniste"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr ""
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: ei voida poistaa: kirjoitussuojattu %s"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: ei voida poistaa"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: virheellinen toiminnon nimi"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: ei lavennusmääritystä"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "varoitus: -F -valitsin ei ehkä toimi odotetusti"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "varoitus: -C -valitsin ei ehkä toimi odotetusti"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "tällä hetkellä komennon lavennusfunktiota ei suoriteta"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "voidaan käyttää ainoastaan funktiossa"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr ""
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr ""
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr ""
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr ""
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "�-f�:ää ei voida käyttää funktioiden luomiseen"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: kirjoitussuojattu funktio"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr ""
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: taulukkomuuttujia ei voi tuhota näin"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: assosiatiivista taulukkoa ei voi muuttaa indeksoiduksi"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "dynaaminen lataus ei ole käytettävissä"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "jaettua objektia %s ei voida avata: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "kohdetta %s ei löydy jaetusta objektista %s: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: ei dynaamisesti ladattu"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr ""
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: ei dynaamisesti ladattu"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: ei voida poistaa: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: on hakemisto"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: ei tavallinen tiedosto"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: tiedosto on liian iso"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: binääritiedostoa ei voida suorittaa"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: ei voida suorittaa: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "lopetus\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "ei ole sisäänkirjautumiskomentotulkki: käytä komentoa �exit�"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Töitä on pysäytettynä.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Töitä on ajossa.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "ei löytynyt komentoa"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "komentohistoriamääritys"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: väliaikaistiedostoa ei voitu avata: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "nykyinen"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "työ %d käynnistyi ilman työnohjausta"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: virheellinen valitsin – %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: valitsin vaatii argumentin – %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "hajautus kytketty pois"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: hajautustaulukko on tyhjä\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "osumia\tkomento\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Sopivat komennot avainsanaan `"
+msgstr[1] "Sopivat komennot avainsanoihin `"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"Ohjeita kohteelle �%s� ei löydy. Kokeile �help help�, �man -k %s� tai \n"
+"�info %s�."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: ei voida avata: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Nämä komennot on määritelty sisäisesti.  Kirjoita �help� nähdäksesi tämän "
+"listan.\n"
+"Kirjoita �help name� saadaksesi lisätietoja funktiosta �name�.\n"
+"Komennolla �info bash� saat lisää yleisiä tietoja komentotulkista.\n"
+"Käytä komentoa �man -k� tai �info� saadaksesi lisätietoja komennoista, jotka "
+"eivät ole tällä listalla.\n"
+"\n"
+"Asteriski (*) nimen vieressä tarkoittaa, että komennon käyttö on estetty.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "valitsimista -anrw voidaan käyttää vain yhtä"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "sijainti komentohistoriassa"
+
+#: builtins/history.def:340
+#, fuzzy, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: virheellinen valitsimen nimi"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: historiaviittaus epäonnistui"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: inlib epäonnistui"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "�-x�:n kanssa ei voida käyttää muita valitsimia"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: argumenttien pitää olla prosessi- tai työtunnisteita"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Tuntematon virhe"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "odotettiin lauseketta"
+
+#: builtins/mapfile.def:178
+#, fuzzy, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: ei ole taulukkomuuttuja"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: virheellinen tiedostokahvamääritys"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: virheellinen tiedostokahva: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: virheellinen rivimäärä"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: virheellinen taulukkoindeksi"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: virheellinen paluukutsumäärä"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "tyhjä taulukkomuuttujan nimi"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "vaaditaan tukea taulukkomuuttujille"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "�%s�: puuttuva muotoilumerkki"
+
+#: builtins/printf.def:474
+#, fuzzy, c-format
+msgid "`%c': invalid time format specification"
+msgstr "%s: virheellinen aikakatkaisumääritys"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "�%c�: virheellinen muotoilumerkki"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "varoitus: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr ""
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "\\x:stä puuttuu heksadesimaalinumero"
+
+#: builtins/printf.def:900
+#, fuzzy, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "\\x:stä puuttuu heksadesimaalinumero"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "ei toista hakemistoa"
+
+#: builtins/pushd.def:360
+#, fuzzy, c-format
+msgid "%s: invalid argument"
+msgstr "%s: virheellinen rajoitusargumentti"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<ei nykyhakemistoa>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "hakemistopino on tyhjä"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "hakemistopinon indeksi"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Näyttää muistissa olevat hakemistot. Hakemistot\n"
+"    löytävät tiensä listaan �pushd�-komennolla; voit\n"
+"    palata listan hakemistoihin �popd�-komennolla.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -c\ttyhjennä hakemistopino\n"
+"      -l\tälä tulosta tilde-alkuisia versioita hakemistoista jotka ovat\n"
+"    \tsuhteessa kotihakemistoosi\n"
+"      -p tulosta hakemistopino, hakemisto per rivi\n"
+"      -v tulosta hakemistopino, hakemisto per rivi, pinon "
+"sijaintinumeroineen\n"
+"    \n"
+"    Argumentit:\n"
+"      +N\tNäyttää listan N:nnen alkion (laskien vasemmalta dirs-komennon \n"
+"    \tantamasta listasta). Valitsimetta kutsuttaessa aloitetaan nollasta.\n"
+"    \n"
+"      -N\tNäyttää listan N:nnen alkion (laskien oikealta dirs-komennon\n"
+"    \tantamasta listasta). Valitsimetta kutsuttaessa aloitetaan nollasta."
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Lisää hakemiston hakemistopinon ylimmäiseksi, tai kääntää pinon, \n"
+"    jolloin nykyhakemisto menee pinon huipulle. Ilman argumentteja \n"
+"    vaihtaa pinon kahden päällimmäisen hakemiston paikkoja.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -n\tjättää hakemiston vaihtamatta, joten vain pinoa muutetaan\n"
+"    \n"
+"    Argumentit:\n"
+"      +N\tKääntää pinoa niin, että N:s hakemisto (laskien vasemmalta \"dirs"
+"\"-\n"
+"      komennon antamasta listasta) on päällimmäisenä.\n"
+"    \n"
+"      -N\tKääntää pinoa niin, että N:s hakemisto (laskien oikealta \"dirs"
+"\"-\n"
+"      komennon antamasta listasta) on päällimmäisenä.\n"
+"    \n"
+"    Sisäänrakennettu �dirs�-komento näyttää hakemistopinon."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Poistaa alkioita hakemistopinosta. Ilman argumenttia poistaa ylimmän\n"
+"    hakemiston, ja siirtää seuraavan ylimmäiseksi.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -n\tEi siirrytä normaalisti pinosta poistettuun hakemistoon,\n"
+"    \tjoten vain pinoa muutetaan.\n"
+"    \n"
+"    Argumentit:\n"
+"      +N\tPoistaa N:nnen alkion (laskien vasemmalta �dirs�-komennon\n"
+"    \tantamasta listasta, alkaen nollasta).  Esimerkiksi �popd +0�\n"
+"    \tpoistaa ensimmäisen hakemistot, �popd +1� toisen.\n"
+"    \n"
+"      -N\tPoistaa N:nnen alkion (laskien oikealta �dirs�-komennon \n"
+"    \tantamasta listasta, alkaen nollasta). Esimerkiksi: �popd -0�\n"
+"    \tpoistaa viimeisen hakemiston, �popd -1� sitä edellisen.\n"
+"    \n"
+"    Sisäänrakennettu �dirs�-komento näyttää hakemistopinon sisällön."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: virheellinen aikakatkaisumääritys"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "lukuvirhe: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr "�return� on käytettävissä vain funktiossa tai ladatussa skriptissä"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "funktiota ja muuttujaa ei voi poistaa yhtä aikaa"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: ei ole taulukkomuuttuja"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: ei ole funktio"
+
+#: builtins/setattr.def:194
+#, fuzzy, c-format
+msgid "%s: cannot export"
+msgstr "%s: ei voida poistaa"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "siirtolaskuri"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr ""
+"komentotulkin valitsimia ei voida laittaa päällä ja ottaa pois päältä "
+"samanaikaisesti"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: virheellinen komentotulkin valitsimen nimi"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "vaaditaan tiedostonimi argumentiksi"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: tiedostoa ei löytynyt"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "ei voida keskeyttää"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "sisäänkirjautumiskomentotulkkia ei voi keskeyttää"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s on aliasioitu �%s�\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s on komentotulkin avainsana\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s on funktio\n"
+
+#: builtins/type.def:299
+#, fuzzy, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s on komentotulkin sisäänrakennettu komento\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s on komentotulkin sisäänrakennettu komento\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s on %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s on hajautettu (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: virheellinen rajoitusargumentti"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "�%c�: virheellinen komento"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: rajoitusta ei saada: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "rajoitus"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: rajoitusta ei voida muokata: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "oktaaliluku"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "�%c�: virheellinen symbolisen tilan operaattori"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "�%c�: virheellinen symbolisen tilan merkki"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " rivi "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "viimeinen komento: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Keskeytetään..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr ""
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "tuntematon komentovirhe"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "virheellinen komentotyyppi"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "virheellinen liittäjä"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "virheellinen hyppy"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: sitomaton muuttuja"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\aaikakatkaisu: automaattinen uloskirjautuminen\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "syötettä ei voida lukea tiedostosta /dev/null: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "AJAN MUOTOMÄÄRITYS: �%c�: virheellinen muotoilumerkki"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr ""
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "putkitusvirhe"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: rajoitettu: komentojen nimissä ei voi käyttää �/�-merkkiä"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: komentoa ei löydy"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr ""
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: virheellinen tulkki"
+
+#: execute_cmd.c:5891
+#, fuzzy, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: binääritiedostoa ei voida suorittaa"
+
+#: execute_cmd.c:5977
+#, fuzzy, c-format
+msgid "`%s': is a special builtin"
+msgstr "%s on komentotulkin sisäänrakennettu komento\n"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "tiedostokahvaa %d ei voida kopioida kahvaksi %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "lausekkeen rekursiomäärä ylittyi"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "rekursiopinon alivuoto"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "lauseoppivirhe lausekkeessa"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "yritettiin sijoittaa objektiin, joka ei ole muuttuja"
+
+#: expr.c:530
+#, fuzzy
+msgid "syntax error in variable assignment"
+msgstr "lauseoppivirhe lausekkeessa"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "jako nollalla"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "bugi: virheellinen sijoitusavainsana"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "�:�:ttä odotettiin ehdolliseen lausekkeeseen"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "eksponentti on pienempi kuin 0"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "odotettiin muuttujaa ++:n tai --:n jälkeen"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "puuttuva �)�"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "lauseoppivirhe: odotettiin operandia"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "lauseoppivirhe: virheellinen aritmetiikkaoperaattori"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (virheellinen avainsana on �%s�)"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "virheellinen lukujärjestelmä"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: virheellinen rivimäärä"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "liian iso luku lukujärjestelmälle"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: virhe lausekkeessa\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: ylempiin hakemistoihin ei päästä"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "nodelay-tilaa ei voida asettaa tiedostokahvalle %d"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr "bashin syötteeksi ei voida avata uutta tiedostokahvaa kahvasta %d"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input: uudella tiedostokahvalla %d on jo puskuri"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: pgrp-putki"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "haarautettu prosessi-id %d on ajossa olevalla työllä %d"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "poistetaan pysäytetty työ %d prosessiryhmästä %ld"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process: prosessi %5ld (%s) on merkattu vielä toimivaksi"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: prosessitunnusta ei löydy."
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Signaali %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Valmis"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Pysäytetty"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Pysäytetty(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "Ajossa"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Valmis(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Poistui %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Tuntematon tila"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(luotiin core-tiedosto)"
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (työhakemisto: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "lapsiprosessin setpgid (%ld => %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: prosessi %ld ei ole tämän komentotulkin lapsiprosessi"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: Prosessista %ld ei ole tietoja"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: työ %d on pysäytetty"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: työtä ei löydy"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: työ on lopetettu"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: työ %d on jo taustalla"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr ""
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: rivi %d:"
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (luotiin core-tiedosto)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(työhakemisto nyt: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: getpgrp epäonnistui"
+
+#: jobs.c:4447
+#, fuzzy
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: vuonhallinta"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: vuonhallinta"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "päätteen prosessiryhmää ei voitu asettaa (%d)"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "tällä komentotulkilla ei ole työnohjausta"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: varmistus epäonnistui: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d: varmistus epäonnistui\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "tuntematon"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: vapaitten listan lohko ylikirjoittui"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: kutsuttiin argumenttina jo vapautettu lohko"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: kutsuttuun argumenttina varaamaton lohko"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: havaittiin alivuoto; mh_nbytes rajojen ulkopuolella"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: havaittiin alivuoto; mh_nbytes rajojen ulkopuolella"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: alku- ja loppulohkojen koot eroavat"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: kutsuargumentti on varaamaton lohko"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc: havaittiin alivuoto; mh_nbytes rajojen ulkopuolella"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc: havaittiin alivuoto; mh_nbytes rajojen ulkopuolella"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: alku- ja loppulohkojen koot eroavat"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: varaustaulukko on täynnä FIND_ALLOCeja?\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: %p on merkitty taulukossa jo varatuksi?\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: %p on jo taulukossa vapaana?\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "virheellinen lukujärjestelmä"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: tuntematon palvelin"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: virheellinen palvelu"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: virheellinen verkkopolkumääritys"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "verkko-operaatioita ei ole tuettu"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr ""
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr ""
+
+#: locale.c:292
+#, fuzzy, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "xrealloc: %s:%d: ei voida varata %lu tavua"
+
+#: locale.c:294
+#, fuzzy, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "xrealloc: %s:%d: ei voida varata %lu tavua"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "Sinulle on postia laatikossa $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "Sinulla on uutta postia laatikossa $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "Posti laatikossa %s on luettu\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "lauseoppivirhe: vaaditaan aritmeettinen lauseke"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "lauseoppivirhe: odottamaton �;�"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "lauseoppivirhe: �((%s))�"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: virheellinen käskytyyppi %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr ""
+"here-dokumentti rivillä %d päättyi tiedoston loppumiseen (haluttiin �%s�)"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr "make_redirection: uudelleenohjaus �%d� rajojen ulkopuolella"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr ""
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "odottamaton EOF (tiedostonloppu) odotettaessa sulkevaa �%c�"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "odottamaton EOF odotettaessa �]]�"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "lauseoppivirhe ehdollisessa lausekkeessa: odottamaton avainsana �%s�"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "lauseoppivirhe ehdollisessa lausekkeessa"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "odottamaton avainsana �%s�, odotettiin �)�"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "odototettiin �)�"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "odottamaton argumentti �%s� ehdolliselle unaariselle operaattorille"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "odottamaton argumentti ehdolliselle unaariselle operaattorille"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr ""
+"odottamaton avainsana �%s�, odotettiin ehdollista binääristä operaattoria"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "odotettiin ehdollista binääristä operaattoria"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "odottamaton argumentti �%s� ehdolliselle binääriselle operaattorille"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "odottamaton argumentti ehdolliselle binääriselle operaattorille"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "odottamaton avainsana �%c� ehdollisessa komennossa"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "odottamaton avainsana �%s� ehdollisessa komennossa"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "odottamaton avainsana %d ehdollisessa komennossa"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "lauseoppivirhe lähellä odottamatonta avainsanaa �%s�"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "lauseoppivirhe lähellä �%s�"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "lauseoppivirhe: odottamaton tiedostonloppu"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "lauseoppivirhe"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Kirjoita �%s� poistuaksesi komentotulkista.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "Odottamaton EOF odotettaessa vastaavaa �)�"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "täydennys: funktiota �%s� ei löytynyt"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr ""
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: tyhjä COMPSPEC"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: virheellinen yhdistin �%d�"
+
+#: print_cmd.c:375
+#, fuzzy, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "%d: virheellinen tiedostokahva: %s"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr ""
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr ""
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: �%c�: virheellinen muotoilumerkki"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "tiedostokahva rajojen ulkopuolella"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: epämääräinen uudelleenohjaus"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: olemassa olevan tiedoston päälle ei voida kirjoittaa"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: rajoitettu: tulostusta ei voida uudelleenohjata"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "here-dokumentille ei voida luoda väliaikaistiedostoa: %s"
+
+#: redir.c:222
+#, fuzzy, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: listaa ei voida sijoittaa taulukon alkioon"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "/dev/(tcp|udp)/host/port-muotoa ei tueta ilman tietoliikennettä"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "virhe uudelleenohjauksessa: tiedostokahvaa ei voida kopioida"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "/tmp-hakemistoa ei löytynyt, luo se!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp:n pitää olla kelvollinen hakemiston nimi"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr ""
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: virheellinen valitsin"
+
+#: shell.c:1319
+#, fuzzy, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "nodelay-tilaa ei voida asettaa tiedostokahvalle %d"
+
+#: shell.c:1330
+#, fuzzy, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "nodelay-tilaa ei voida asettaa tiedostokahvalle %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr ""
+
+#: shell.c:1632
+#, fuzzy, c-format
+msgid "%s: Is a directory"
+msgstr "%s: on hakemisto"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "Minulla ei ole nimeä!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, versio %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Käyttö:\t%s[GNU:n pitkä valitsin] [valitsin] ...\n"
+"\t%s [GNU:n pitkä valitsin] [valitsin] komentotiedosto ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "GNU:n pitkät valitsimet:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Komentotulkin valitsimet:\n"
+
+#: shell.c:2043
+#, fuzzy
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr ""
+"\t-irsD tai -c komento tai -O shopt_option (ainoastaan käynnistettäessä)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s tai -o -valitsin\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+"Kirjoita �%s -c 'help set'� saadaksesi lisätietoja komentotulkin "
+"valitsimista.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr ""
+"Kirjoita �%s -c help� saadaksesi lisätietoja komentotulkin "
+"sisäänrakennetuista komennoista.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "Raportoi virheet komennolla �bashbug�.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr ""
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr ""
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: virheellinen operaatio"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Väärä signaali"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Linjankatkaisu"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Keskeytys"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Lopetettu"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Virheellinen käsky"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "Jäljitys/katkaisupisteansa"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "ABORT-käsky"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "EMT-käsky"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Liukulukupoikkeus"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Tapettu"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Väylävirhe"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Muistialueen ylitys"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Virheellinen järjestelmäkutsu"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Katkennut putki"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Herätyskello"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Päätetty"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Kiireellinen I/O-ehto"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Pysäytetty (signaali)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Jatka"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Lapsiprosessin kuolema tai pysähtyminen"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Pysäytetty (päätteen syöte)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Pysäytetty (päätteen tuloste)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "I/O on valmis"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "CPU-rajoitus"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "Tiedostorajoitus"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Hälytys (virtuaalinen)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Hälytys (profiili)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Ikkuna vaihtunut"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Tietuelukko"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Käyttäjän määrittelemä signaali 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Käyttäjän määrittelemä signaali 2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "HFT-syöte odottaa"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "sähkökatko lähellä"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "järjestelmän kaatuminen lähellä"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "siirrä prosessi toiselle CPU:lle"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "ohjelmointivirhe"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "HFT-monitorointitila käytössä"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "HFT-monitorointitila peruttu"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "HFT-äänisekvenssi on valmistunut"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "Informaatiopyyntö"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "Tuntematon signaali #%d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "virheellinen korvaus: ei sulkevaa �%s� jonossa %s"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: listaa ei voida sijoittaa taulukon alkioon"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "putkea ei voida luoda prosessin korvaamista varten"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "lapsiprosessia ei voida luoda prosessin korvaamista varten"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "nimettyä putkea %s ei voida avata lukemista varten"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "nimettyä putkea %s ei voida avata kirjoitusta varten"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "nimettyä putkea %s ei voida kopioida tiedostokahvaksi %d"
+
+#: subst.c:6213
+#, fuzzy
+msgid "command substitution: ignored null byte in input"
+msgstr "virheellinen korvaus: ei sulkevaa �`� jonossa %s"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "putkea ei voida luoda komennon korvaamista varten"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "ei voida luoda lapsiprosessia komennon korvaamista varten"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute: putkea ei voida kopioida tiedostokahvaksi 1"
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr ""
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, fuzzy, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: virheellinen rivimäärä"
+
+#: subst.c:7013 subst.c:7177
+#, fuzzy, c-format
+msgid "%s: invalid variable name"
+msgstr "%s: virheellinen toiminnon nimi"
+
+#: subst.c:7256
+#, fuzzy, c-format
+msgid "%s: parameter not set"
+msgstr "%s: parametria ei ole tai sitä ei ole asetettu"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: parametria ei ole tai sitä ei ole asetettu"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: alimerkkijonolauseke < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: virheellinen korvaus"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: ei voida asettaa näin"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "virheellinen korvaus: ei sulkevaa �`� jonossa %s"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "ei osumia: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "odotettiin argumenttia"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: odotettiin kokonaislukuilmaisua"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "odotettiin �)�"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "odotettiin �)�, löydettiin %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: odotettiin binääristä operaattoria"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: odotettiin unaarista operaattoria"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "puuttuva �]�"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "lauseoppivirhe: odottamaton �;�"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "virheellinen signaalinumero"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr ""
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: virheellinen arvo trap_list[%d]: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps: signaalikäsittelijä on SIG_DFL, lähetän %d (%s) uudelleen "
+"itselleni"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: virheellinen signaali %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "virhe tuotaessa �%s�:n funktiomääritystä"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "komentotulkkitaso (%d) liian korkea, palautetaan 1:ksi"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: ei funktiokontekstia nykytilassa"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr ""
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr ""
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: ei funktiokontekstia nykytilassa"
+
+#: variables.c:4771
+#, fuzzy, c-format
+msgid "%s has null exportstr"
+msgstr "%s: parametria ei ole tai sitä ei ole asetettu"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "virheellinen merkki %d %s:n exportstr:ssä"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "ei =:ä kohteen %s exportstr:ssä"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr "pop_var_context: shell_variablesin alku ei ole funktiokonteksti"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: ei global_variables-kontekstia"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr ""
+"pop_scope: shell_variablesin alku ei väliaikaisten ympäristömuuttujien "
+"ympäristössä"
+
+#: variables.c:6387
+#, fuzzy, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: ei voida avata: %s"
+
+#: variables.c:6392
+#, fuzzy, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%d: virheellinen tiedostokahva: %s"
+
+#: variables.c:6437
+#, fuzzy, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s rajojen ulkopuolella"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Copyright © 2009 Free Software Foundation, Inc."
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"Lisenssi GPLv3+: GNU GPL versio 3 tai uudempi <http://gnu.org/licenses/gpl."
+"html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, versio %s (%s)\n"
+
+#: version.c:91 version2.c:91
+#, fuzzy
+msgid "This is free software; you are free to change and redistribute it."
+msgstr "Tämä on vapaa ohjelma; saat muutella ja levittää sitä vapaasti.\n"
+
+#: version.c:92 version2.c:92
+#, fuzzy
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "Takuuta ei ole lain määräämissä rajoissa.\n"
+
+#: xmalloc.c:93
+#, fuzzy, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "xmalloc: ei voida varata %lu tavua (varattiin %lu tavua)"
+
+#: xmalloc.c:95
+#, fuzzy, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "xmalloc: ei voitu varata %lu tavua"
+
+#: xmalloc.c:165
+#, fuzzy, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "xmalloc: %s:%d: ei voida varata %lu tavua (varattiin %lu tavua)"
+
+#: xmalloc.c:167
+#, fuzzy, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "xmalloc: %s:%d: ei voida varata %lu tavua"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [nimi[=arvo] ... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] nimi [nimi ...]"
+
+#: builtins.c:53
+#, fuzzy
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpvsPVS] [-m näppäinkartta] [-f tiedostonimi] [-q nimi] [-u nimi] [-r "
+"näppäinsarja] [-x näppäinsarja:komento] [näppäinsarja:readline-funktio tai "
+"readline-komento]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [sisäänrakennettu komento [arg ...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [expr]"
+
+#: builtins.c:66
+#, fuzzy
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|-P] [dir]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] komento [arg ...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFilrtux] [-p] [niemi[=arvo] ...]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFilrtux] [-p] nimi[=arvo] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [valitsin] nimi[=arvo] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [arg ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [arg ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f tiedosto] [nimi ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [arg ...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts valitsinmerkit nimi [arg]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a nimi] [komento [argumentit ...]] [uudelleenohjaus ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "lopetus [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr ""
+"fc [-e e-nimi] [-lnr] [ensimmäinen] [viimeinen] tai fc -s [pat=rep] [komento]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [työtunniste]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [työtunniste ...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p polku] [-dt] [nimi ...]"
+
+#: builtins.c:119
+#, fuzzy
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-ds] [malline ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d erotus] [n] tai history -anrw [tiedosto] or history -ps arg "
+"[arg...]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [työtunniste ...] tai jobs -x komento [args]"
+
+#: builtins.c:131
+#, fuzzy
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [työtunniste ...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s signaalitunniste | -n signaalinumero | -signaalimäärite] prosessi-"
+"id | työtunniste ... tai kill -l [signaalimäärite]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let arg [arg ...]"
+
+#: builtins.c:138
+#, fuzzy
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a taulukko] [-d erotin] [-i teksti] [-n lkm] [-p kehote] [-t "
+"aikakatkaisu] [-u tiedostokahva] [nimi ...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+#, fuzzy
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [--abefhkmnptuvxBCHP] [-o valitsinnimi] [arg ...]"
+
+#: builtins.c:144
+#, fuzzy
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [nimi ...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [nimi[=arvo] ...] tai export -p"
+
+#: builtins.c:148
+#, fuzzy
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-af] [nimi[=arvo] ...] tai readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source tiedosto [argumentit]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". tiedosto [argumentit]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [lauseke]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ arg... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[arg] signaalimäärite ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] nimi [nimi ...]"
+
+#: builtins.c:171
+#, fuzzy
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHacdefilmnpqrstuvx] [raja]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [tila]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [id]"
+
+#: builtins.c:181
+#, fuzzy
+msgid "wait [pid ...]"
+msgstr "wait [pid]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for NIMI [in ARVOT ... ] ; do KOMENNOT; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( lause1; lause2; lause3 )); do KOMENNOT; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select NIMI [in ARVOT ... ;] do KOMENNOT; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] komentoputki"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case SANA in [MALLINE [| MALLINE]...) KOMENNOT ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if KOMENNOT; then KOMENNOT; [ elif KOMENNOT; then KOMENNOT; ]... [ else "
+"KOMENNOT; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while KOMENNOT; do KOMENNOT; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until KOMENNOT; do KOMENNOT; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [NIMI] komento [uudelleenohjaukset]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function nimi { KOMENNOT ; } tai nimi () { KOMENNOT ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ KOMENNOT ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "työtunniste [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( lauseke ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ lauseke ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "muuttujat - eräiden komentotulkin muuttujien nimet ja merkitykset"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | hakemisto]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [valitsinnimi ...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v muuttuja] muoto [argumentit]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-o valitsin] [-A toimenpide] [-G "
+"jokerimalline] [-W sanalista]  [-F funktio] [-C komento] [-X "
+"suodatinmalline] [-P prefiksi] [-S suffiksi] [nimi...]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o valitsin]  [-A toimenpide] [-G jokerimalline] [-"
+"W sanalista]  [-F funktio] [-C komento] [-X suodatinmalline] [-P prefiksi] [-"
+"S suffiksi] [sana]"
+
+#: builtins.c:239
+#, fuzzy
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o valitsin] [nimi ...]"
+
+#: builtins.c:242
+#, fuzzy
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-n lukumäärä] [-O alkuperä] [-s laskuri] [-t] [-u tiedostokahva] \n"
+"[-C paluukutsu] [-c määrä] [taulukko]"
+
+#: builtins.c:244
+#, fuzzy
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-n lukumäärä] [-O alkuperä] [-s laskuri] [-t] [-u "
+"tiedostokahva] \n"
+"[-C paluukutsu] [-c määrä] [taulukko]"
+
+#: builtins.c:256
+#, fuzzy
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Näytä tai määrittele aliaksia.\n"
+"    \n"
+"    Ilman aliaksia �alias� tulostaa vakiotulosteeseen listan aliaksista \n"
+"    hyödynnettävässä muodossa �alias NIMI=ARVO�.\n"
+"    \n"
+"    Muussa tapauksessa luodaan uusi alias jokaiselle NIMELLE,\n"
+"    jonka ARVO on annettu. ARVON jälkeinen tyhjä tarkastetaan\n"
+"    alias-korvauksen varalta aliasta laajennettaessa.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -p\ttulosta kaikki määritellyt aliakset hyödynnettävässä\n"
+"      \tmuodossa.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    alias palauttaa arvon tosi, mikäli parametriksi on annettu NIMI jonka\n"
+"    aliasta ei ole määritelty."
+
+#: builtins.c:278
+#, fuzzy
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Poista kukin NIMI määriteltyjen aliasten listasta.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -a\tpoista kaikki aliasmääritykset.\n"
+"    \n"
+"    Palauttaa arvon tosi paitsi jos NIMI-nimistä aliasta\n"
+"    ei ole."
+
+#: builtins.c:291
+#, fuzzy
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"Aseta readlinen näppäimistösidonnat ja muuttujat.\n"
+"    \n"
+"    Sido näppäinyhdistelmä readlinen funktioon tai makroon, tai \n"
+"    aseta readlinen muuttuja. Valitsimeton argumenttisyntaksi vastaa\n"
+"    ~/.inputrc:n, mutta on annettava yhtenä argumenttina:\n"
+"    esimerkiksi, bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -m näppäinkartta         käytä NÄPPÄINKARTTAA tämän komennon ajan.\n"
+"                         Hyväksyttäviä näppäinkarttoja ovat emacs, emacs-"
+"standard,\n"
+"                         emacs-meta, emacs-cltx, vi, vi-move, vi-command ja "
+"vi-insert.\n"
+"      -l                 Listaa funktioiden nimet\n"
+"      -P                 Listaa funktioiden nimet ja sidonnat.\n"
+"      -p                 Listaa funktioiden nimet ja sidonnat "
+"hyödynnettävässä \n"
+"                         muodossa.\n"
+"      -S                 Listaa makrot herättävät näppäinyhdistelmät ja "
+"niiden \n"
+"                         arvot\n"
+"      -s                 Listaa makrot herättävät näppäinyhdistelmät ja "
+"niiden \n"
+"                         arvot\n"
+"                         hyödynnettävässä muodossa.\n"
+"      -q funktion-nimi   Tarkista, mitkä näppäimet käynnistävät nimetyn \n"
+"                         funktion.\n"
+"      -u funktion-nimi   Poista nimettyyn funktioon tehdyt näppäinsidonnat.\n"
+"      -r näppäinyhdistelmä Poista NÄPPÄINYHDISTELMÄN sidonta.\n"
+"      -f tiedosto       Lue näppäinsidonnat TIEDOSTOSTA.\n"
+"      -x näppäinyhdistelmä:komento\tkäynnistä KOMENTO \n"
+"                         NÄPPÄINYHDISTELMÄLLÄ.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    bind palauttaa 0 paitsi jos on annettu tunnistamaton valitsin tai "
+"tapahtuu \n"
+"    virhe."
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Exit for, while- tai until-silmukoista\n"
+"    \n"
+"    Poistu FOR-, WHILE- tai UNTIL-silmukasta.  Jos N on annettu, poistu\n"
+"    N:stä sisäkkäisestä silmukasta.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Paluuarvo on 0 jollei N ole suurempi tai yhtäsuuri kuin 1."
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Jatko for-, while tai until-silmukoille.\n"
+"    \n"
+"    Jatkaa seuraavaa FOR-, WHILE- tai UNTIL-silmukan kierrosta.\n"
+"    Jos N on annettu, jatkaa N:ttä silmukkaa.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Paluuarvo on 0 ellei N ole suurempi tai yhtäsuuri kuin 1."
+
+#: builtins.c:354
+#, fuzzy
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Suorita komentotulkin sisäänrakennettuja komentoja.\n"
+"    \n"
+"    Suorita KOMENTO argumentein ARGs ilman komennon etsimistä.\n"
+"    Tämä on hyödyllistä silloin, kun haluat tehdä komentotulkin komennosta\n"
+"    funktion, mutta haluat suorittaa komennon funktiosta käsin.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa KOMENNON paluuarvon, tai epätoden jos KOMENTO ei ole\n"
+"    sisäänrakennettu komento."
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Palauta tämänhetkisen alirutiinikutsun konteksti.\n"
+"    \n"
+"    Ilman parametria, palauttaa �$line $filename�. Parametrilla palauttaa \n"
+"    �$line $subroutine $filename�; saatua lisätietoa voidaan käyttää "
+"kutsupinon\n"
+"    kuvaamiseksi.\n"
+"    \n"
+"    Parametrin arvo määrää, montako kutsukehystä taaksepäin siirrytään; \n"
+"    ylin kehys on numero 0.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa 0 ellei komentotulkki ole funktion ulkopuolella tai parametri\n"
+"    on virheellinen."
+
+#: builtins.c:387
+#, fuzzy
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"Vaihtaa työhakemistoa.\n"
+"    \n"
+"    Siirry hakemistoon HAKEMISTO. HAKEMISTOn oletusarvo on HOME-\n"
+"    ympäristömuuttujan arvo.\n"
+"    \n"
+"    CDPATH-ympäristömuuttuja määrittelee hakupolun HAKEMISTOlle.  Vaihto-\n"
+"    ehtoiset hakemistonimet erotetaan CDPAThissa kaksoispisteellä.\n"
+"    Tyhjä hakemisto tarkoittaa nykyistä hakemistoa. Jos HAKEMISTO ALKAA\n"
+"    kauttaviivalla, CDPATHia ei käytetä.\n"
+"    \n"
+"    Jos hakemistoa ei löydy, ja komentotulkin valitsin �cdable_vars� on "
+"asetettu,\n"
+"    oletetaan hakemiston olevan muuttuja. Jos kyseisellä muuttujalla on "
+"arvo,\n"
+"    sitä käytetään HAKEMISTOksi.\n"
+"    \n"
+"    Valitsimet:\n"
+"         -L\tpakota seuraamaan symbolisia linkkejä\n"
+"         -P\tkäytä fyysistä hakemistorakennetta, älä seuraa symbolisia "
+"linkkejä\n"
+"    \n"
+"    Oletus on seurata symbolisia linkkejä, kuten jos �-L� olisi annettu.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa 0, jos hakemistoa vaihdettiin, nollasta poikkeavan muussa \n"
+"    tapauksessa."
+
+#: builtins.c:425
+#, fuzzy
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"Tulostaa tämänhetkisen työhakemiston.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -L\ttulosta $PWD-ympäristömuuttujan arvo jos se sisältää\n"
+"    \tnykyisen työhakemiston nimen\n"
+"      -P\ttulosta fyysinen hakemisto ilman symbolisia linkkejä\n"
+"    \n"
+"    Oletusarvoisesti �pwd� käyttäytyy kuin �-L� olisi annettu.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa 0 ellei ole annettu virheellistä valitsinta tai nykyistä \n"
+"    hakemistoa ei voida lukea."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Tyhjä komento.\n"
+"    \n"
+"    Ei vaikutusta; komento ei tee mitään.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Onnistuu aina."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Palauttaa onnistuneen paluuarvon.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Onnistuu aina."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Palauttaa epäonnistuneen paluuarvon.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Epäonnistuu aina."
+
+#: builtins.c:471
+#, fuzzy
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Suorittaa yksinkertaisen komennon tai näyttää tietoja komennoista.\n"
+"    \n"
+"    Suorittaa KOMENNON PARAMETREIN ohittaen komentotulkin funktiohaun,\n"
+"    tai näyttää tietoja annetuista KOMENNOISTA. Voidaan käyttää \n"
+"    käynnistämään komentoja levyltä silloin, kun on olemassa samanniminen\n"
+"    funktio.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -p\tkäytä PATHin oletusarvoa jonka taataan löytävän kaikki "
+"vakiotyökalut\n"
+"      -v\ttulosta KOMENNON kuvaus (kuten sisäänrakennettu �type�-komento)\n"
+"      -V\ttulosta KOMENTOJEN yksityiskohtaisemmat kuvaukset\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa KOMENNON paluuarvon, tai epäonnistumisen jos KOMENTOA ei \n"
+"    löytynyt."
+
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"Asettaa muuttujien arvot ja attribuutit.\n"
+"    \n"
+"    Määrittele muuttujat ja anna niille attribuutit.  Jos NIMIÄ ei anneta,\n"
+"    näytä kaikkien muuttujien attribuutit ja arvot.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -f\trajaa toiminto tai listaus funktioiden nimiin ja määrityksiin\n"
+"      -F\trajaa listaus ainoastaan funktioiden nimiin (plus rivinumeroon \n"
+"   \t        ja lähdetiedostoon debugattaessa)\n"
+"      -p\tnäytä jokaisen NIMEN attribuutit ja arvo\n"
+"    \n"
+"    Attribuutteja muuttavat valitsimet:\n"
+"      -a\ttee NIMISTÄ indeksoidut taulukot (jos tuettu)\n"
+"      -A\ttee NIMISTÄ assosiatiiviset taulukot (jos tuettu)\n"
+"      -i\ttee NIMISTÄ kokonaislukuja\n"
+"      -l\tNIMIIN sijoitetut merkkijonot muutetaan pienaakkosiksi\n"
+"      -r\tkirjoitussuojaa NIMET\n"
+"      -t\taseta NIMIEN �trace�-attribuutti\n"
+"      -u\tNIMIIN sijoitetut merkkijonot muutetaan suuraakkosiksi\n"
+"      -x\tNIMET viedään\n"
+"    \n"
+"    Käyttämällä �+�:aa �-�:n sijaan annettu attribuutti poistetaan.\n"
+"    \n"
+"    Muuttujille, joille on annettu kokonaislukuattribuutti, suoritetaan\n"
+"    aritmeettinen evaluointi silloin kun niille annetaan arvo (katso\n"
+"    �let�-komento).\n"
+"    \n"
+"    Funktiossa käytettäessä �declare� tekee NIMISTÄ paikallisia, kuten "
+"�local�-\n"
+"    komento.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistumisen ellei ole annettu virheellistä valitsinta tai "
+"tule \n"
+"    virhetilannetta."
+
+#: builtins.c:532
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"Asettaa muuttujien arvoja ja attribuutteja.\n"
+"    \n"
+"    Vanhentunut. Katso �help declare�."
+
+#: builtins.c:540
+#, fuzzy
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Määrittele paikallisia muuttujia.\n"
+"    \n"
+"    Luo paikallinen NIMI-niminen muuttuja, ja anna sille arvo ARVO. "
+"VALITSIN\n"
+"    voi olla mikä tahansa komennon �declare� hyväksymä.\n"
+"    \n"
+"    Paikallisia muuttujia voidaan käyttää ainoastaan funktiossa; ne ovat\n"
+"    näkyviä ainoastaan määritelleessä funktiossa ja sen lapsissa.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen, ellei ole annettu virheellistä valitsinta,\n"
+"    tapahtuu virhe tai komentotulkki ei ole suorittamassa funktiota."
+
+#: builtins.c:557
+#, fuzzy
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Kirjoita argumentit vakiotulosteeseen.\n"
+"    \n"
+"    Tulosta ARGUMENTIT vakiotulosteeseen rivinvaihdoin.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -n\tälä lisää rivinvaihtoa\n"
+"      -e\ttulkitse seuraavat kenoviivaohjaukset\n"
+"      -E\tohita kenoviivaohjausten tulkinta\n"
+"    \n"
+"    \"echo\" tulkitsee seuraavat kenoviivaohjausmerkit:\n"
+"      \\a\täänimerkki\n"
+"      \\b\tbackspace\n"
+"      \\c\tkeskeytä tulostus\n"
+"      \\e\tESC-merkki\n"
+"      \\f\tsivunvaihto\n"
+"      \\n\trivinvaihto\n"
+"      \\r\tpalautin\n"
+"      \\t\tsarkain\n"
+"      \\v\tvertikaalinen sarkain\n"
+"      \\\\\tkenoviiva\n"
+"      \\0nnn\tmerkki jonka ASCII-koodi oktaalina on NNN. NNN voi olla 0-3\n"
+"    \toktaalimerkkiä\n"
+"      \\xHH\tkahdeksanbittinen merkki jonka heksadesimaaliarvo on HH. HH "
+"voi \n"
+"    \tolla 1-2 heksadesimaalimerkkiä\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen ellei tapahdu virhettä."
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Tulosta argumentit vakiotulosteeseen.\n"
+"    \n"
+"    Tulosta ARGUMENTIT vakiotulosteeseen päättäen rivinvaihdolla.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -n\tälä lisää rivinvaihtoa\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen ellei tapahdu virhettä."
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"Ottaa käyttöön tai poistaa käytöstä komentotulkin sisäänrakennettuja "
+"komentoja.\n"
+"    \n"
+"    Ottaa käyttöön tai poistaa komentotulkin sisäänrakennettuja komentoja\n"
+"    käytöstä.  Käytöstäpoisto sallii sinun käyttävän sisäisen komennon "
+"kanssa \n"
+"    samannimisiä, levyllä olevia komentoja käyttämättä koko polkua.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -a\tlistaa komennot ja tiedot, mitkä on otettu käyttöön\n"
+"      -n\tpoistaa NIMET käytöstä tai näyttää listan poistetuista\n"
+"      -p\ttulosta lista komennoista hyödynnettävässä muodossa\n"
+"      -s\ttulosta ainoastaan Posix-komennot\n"
+"    \n"
+"    Valitsimet, jotka kontrolloivat dynaamista lataamista:\n"
+"      -f\tlataa komento NIMI jaetusta objektista TIEDOSTO\n"
+"      -d\tpoista -f:llä ladattu komento\n"
+"    \n"
+"    Jollei valitsimia anneta, kukin NIMI otetaan käyttöön.\n"
+"    \n"
+"    Jos haluat käyttää $PATHista löytyvää �test�-komentoa sisäänrakennetun\n"
+"    sijaan, kirjoita �enable -n test�.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen, paitsi jos NIMI ei ole komentotulkin "
+"sisäänrakennettu\n"
+"    komento tai tapahtuu virhe."
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Suorita argumentit komentotulkin komentona.\n"
+"    \n"
+"    Yhdistä ARGUMENTIT yhdeksi merkkijonoksi, käytä tulosta komentotulkin\n"
+"    syötteenä ja suorita saadut komennot.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa komennon paluuarvon tai onnistuneen jos komento on tyhjä."
+
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"Selaa valitsimien argumentit.\n"
+"    \n"
+"    Getoptsia käytetään komentotulkin proseduureissa käsiteltäessä\n"
+"    komentoriviparametreina annettuja valitsimia.\n"
+"    \n"
+"    OPTSTRING sisältää tunnistettavat valitsinkirjaimet; jos kirjainta\n"
+"    seuraa kaksoispiste, valitsimella odotetaan olevan argumentti, joka \n"
+"    pitäisi erottaa siitä tyhjämerkillä.\n"
+"    \n"
+"    Getopts sijoittaa joka kutsukerralla seuraavan valitsimen muuttujaan\n"
+"    $nimi, alustaen sen tarvittaessa, ja seuraavan käsiteltävän argumentin\n"
+"    OPTIND-ympäristömuuttujaan.  OPTIND alustetaan 1:ksi jokaisella\n"
+"    komentotulkin tai komentotiedoston käynnistyskerralla. Kun valitsin\n"
+"    vaatii argumentin, getopts sijoittaa sen muuttujaan OPTARG.\n"
+"    \n"
+"    Getopts ilmoittaa virheistä jommallakummalla tavalla kahdesta. Jos\n"
+"    OPTSTRINGIN ensimmäinen merkki on kaksoispiste, getopts ilmoittaa\n"
+"    virheistä hiljaisesti. Tällöin ei tulosteta virheilmoitusta.  Jos "
+"löydetään\n"
+"    virheellinen valitsinmerkki, se sijoitetaan OPTARGIIN. Jos vaadittua\n"
+"    argumenttia ei löydetä, getopts sijoittaa �:�:n NAMEEN ja asettaa\n"
+"    löydetyn optiomerkin OPTARGIIN. Jos getopts ei ole hiljaisessa tilassa\n"
+"    ja löydetään virheellinen valitsin, getopts sijoittaa �?�:n NAMEEN ja\n"
+"    tyhjentää OPTARGIN.  Jos vaadittua argumenttia ei löydetä, NAMEEN\n"
+"    sijoitetaan �?�, OPTARG tyhjennetään ja tulostetaan virheilmoitus.\n"
+"    \n"
+"    Jos OPTERR-ympäristömuuttujassa on arvo 0, getopts jättää "
+"virheilmoitukset\n"
+"    tulostamatta, vaikka OPTSTRINGIN ensimmäinen merkki ei ole "
+"kaksoispiste.\n"
+"    OPTERRin oletusarvo on 1.\n"
+"    \n"
+"    Getopts selaa normaalisti positioparametrit ($0 - $9), mutta jos \n"
+"    argumentteja annetaan enemmän, ne selataan sen sijaan.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen jos valitsin löytyy; epäonnistuneen jos "
+"valitsimet\n"
+"    loppuvat tai tapahtuu virhe."
+
+#: builtins.c:694
+#, fuzzy
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"Korvaa komentotulkki annetulla komennolla.\n"
+"    \n"
+"    Suorita KOMENTO, korvaten tämä komentotulkki annetulla ohjelmalla.\n"
+"    ARGUMENTEISTA tulee KOMENNON argumentteja. Jos KOMENTOA ei anneta,\n"
+"    kaikki uudelleenohjaukset tapahtuvat nykyisessä komentotulkissa.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -a name\tanna NAME nollantena argumenttina KOMENNOLLE\n"
+"      -c\t\tsuorita KOMENTO tyhjässä ympäristössä\n"
+"      -l\t\tsijoita miinusmerkki KOMENNON nollanteen argumenttiin\n"
+"    \n"
+"    Jos komentoa ei voida suorittaa, ei-interaktiivinen komentotulkki "
+"poistuu,\n"
+"    ellei tulkin valitsinta �execfail� ole asetettu.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen paitsi jos KOMENTOA ei löydy tai "
+"uudelleenohjauksessa\n"
+"    tapahtuu virhe."
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Poistu komentotulkista.\n"
+"    \n"
+"    Poistuu komentotulkista paluuarvolla N. Jos N:ää ei anneta, paluuarvo\n"
+"    on viimeisen komennon paluuarvo."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Poistu sisäänkirjautumiskomentotulkista.\n"
+"    \n"
+"    Poistuu sisäänkirjautumiskomentotulkista paluuarvolla N.  Palauttaa\n"
+"    virheen jos ei olla sisäänkirjautumiskomentotulkissa."
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"Näytä tai suorita komentoja komentohistoriasta.\n"
+"    \n"
+"    Fc:tä käytetään historialistassa olevien komentojen tulostamiseen tai\n"
+"    muokkaamiseen ja uudelleensuoritukseen. ALKU ja LOPPU voivat olla\n"
+"    rajaavia numeroita, tai ALKU voi olla merkkijono, joka tarkoittaa "
+"viimei-\n"
+"    sintä sillä alkavaa komentoa.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -e ENIMI\tvalitse käytettävä editori. Oletus on FCEDIT, sitten EDITOR\n"
+"    \t\tsitten vi\n"
+"      -l\tlistaa rivit editoinnin sijaan\n"
+"      -r\tlistaa käänteisessä järjestyksessä\n"
+"    \n"
+"    Käytettäessä muotoa �fc -s [malline=korvaus] [komento]�, komento\n"
+"    suoritetaan kun korvaus MALLINE=KORVAUS on suoritettu.\n"
+"    \n"
+"    Eräs käyttökelpoinen alias on r='fc -s', jolloin �r cc� ajaa viimeisen "
+"cc-\n"
+"    alkuisen komennon ja �r� suorittaa viimeisen komennon.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen tai suoritetun komennon paluuarvon; nollasta\n"
+"    poikkeava virhetilanteessa."
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Siirrä työ edustalle.\n"
+"    \n"
+"    Siirrä TYÖKUVAAJALLA tunnistettu työ edustalle, jolloin siitä tulee "
+"nykyinen\n"
+"    työ. Jos TYÖKUVAAJAA ei ole annettu, käytetään komentotulkin käsitystä\n"
+"    tämänhetkisestä työstä.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Edustalle tuodun työn paluuarvo, tai epäonnistuminen virhetilanteessa."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Siirtää työt taustalle.\n"
+"    \n"
+"    Siirtää kunkin TYÖNKUVAAJALLA tunnistetun työn taustalle, kuten jos ne "
+"olisi\n"
+"    käynnistetty �&�:llä. Jos TYÖNKUVAAJAA ei ole annettu, käytetään "
+"komento-\n"
+"    tulkin käsitystä nykyisestä työstä.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen paitsi jos työnohjaus ei ole käytössä tai "
+"tapahtuu\n"
+"    virhe."
+
+#: builtins.c:793
+#, fuzzy
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"Muista tai näytä ohjelmien sijainnit.\n"
+"    \n"
+"    Selvitä ja muista jokaisen komennon NIMI täysi polkunimi. Jos "
+"argumentteja\n"
+"    ei ole annettu, tulostetaan tiedot muistetuista komennoista.\n"
+"\n"
+"    Valitsimet:\n"
+"      -d\t\tunohda jokaisen NIMEN sijainti\n"
+"      -l\t\tnäytä hyödynnettävässä muodossa\n"
+"      -p polku\tkäytä POLKUA NIMEN täytenä polkunimenä\n"
+"      -r\t\tunohda kaikki sijainnit\n"
+"      -t\t\ttulosta kaikkien NIMIEN muistetut sijainnit. Jos annetaan "
+"useampi NIMI,\n"
+"        \t\tsijaintien eteen tulostetaan vastaava NIMI\n"
+"    Argumentit:\n"
+"       NIMI\t\tKukin NIMI etsitään $PATH-muuttujan hakupoluista ja lisätään\n"
+"       muistettujen komentojen listaan.\n"
+"\n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen paitsi jos NIMEÄ ei löydy tai on annettu "
+"virheellinen valitsin."
+
+#: builtins.c:818
+#, fuzzy
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Näyttää tietoja sisäänrakennetuista komennoista.\n"
+"    \n"
+"    Näyttää lyhyet tiivistelmät sisäänrakennetuista komennoista. Jos "
+"MALLINE\n"
+"    on annettu, antaa yksityiskohtaisemman ohjeen kaikista MALLINEESEEN\n"
+"    sopivista komennoista, muuten tulostetaan lista ohjeotsikoista.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -d\ttulosta kunkin aiheen lyhyt kuvaus\n"
+"      -m\tnäytä käyttöohje man-sivumaisessa muodossa\n"
+"      -s\ttulosta ainoastaan lyhyt käyttöohje kustakin MALLINEESEEN \n"
+"      \tsopivasta\n"
+"    \n"
+"    Argumentit:\n"
+"       MALLINE\tohjeotsikon hakumalline\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen paitsi jos MALLINETTA ei löydy tai valitsin on\n"
+"    virheellinen."
+
+#: builtins.c:842
+#, fuzzy
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Näyttää tai muokkaa komentohistoriaa.\n"
+"    \n"
+"    Näyttää (komento)historian rivinumeroin, sijoittaen asteriskin jokaisen\n"
+"    muokatun alkion eteen. Argumentilla N listataan vain N viimeistä "
+"alkiota.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -c\ttyhjennä historia poistamalla kaikki alkiot\n"
+"      -d sijainti\tpoista alkio kohdasta SIJAINTI\n"
+"    \n"
+"      -a\tlisää tämän istunnon historiarivit historiatiedostoon\n"
+"      -n\tlue kaikki rivit, joita ei jo ole luettu historiatiedostosta\n"
+"      -r\tlue historiatiedosto ja lisää sen sisältö historiaan\n"
+"      -w\tkirjoita nykyinen historia historiatiedostoon ja lisää ne "
+"historiaan\n"
+"    \n"
+"      -p\tsuorita historialaajennos jokaiselle ARGUMENTILLE ja näytä tulos\n"
+"    \tlisäämättä sitä historiaan\n"
+"      -s\tliitä ARGUMENTIT historiaan yhtenä alkiona\n"
+"    \n"
+"    Jos TIEDOSTO on annettu, sitä käytetään historiatiedostona. Muuten,\n"
+"    jos $HISTFILE:llä on arvo, sitä käytetään, muuten ~/.bash_history.\n"
+"    \n"
+"    Jos $HISTTIMEFORMAT-muuttuja on asetettu ja se ei ole tyhjä, sen arvoa\n"
+"    käytetään strftime(3):n muotoilujonona tulostettaessa kunkin alkion "
+"aikaleima.\n"
+"    Muussa tapauksessa aikaleimoja ei tulosteta.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen paitsi jos on annettu virheellinen valitsin "
+"tai     tapahtuu virhe."
+
+#: builtins.c:879
+#, fuzzy
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"Näyttää töiden tilan.\n"
+"    \n"
+"    Listaa aktiiviset työt. TYÖMÄÄRITYS rajaa tulostuksen kyseiseen työhön.\n"
+"    Ilman valitsimia tulostetaan kaikkien aktiivisten töiden tila.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -l\tlistaa prosessitunnukset (pid) muun tiedon lisäksi\n"
+"      -n\tlistaa ainoastaan prosessit joiden tila on muuttunut viimeisen\n"
+"    \tilmoituksen jälkeen\n"
+"      -p\tlistaa vain prosessitunnukset\n"
+"      -r\trajaa tulostus ajossa oleviin töihin\n"
+"    \n"
+"    Jos -x on annettu, KOMENTO suoritetaan kun kaikki ARGUMENTEISSA annetut\n"
+"    työmääritykset on korvattu kyseisen työn prosessiryhmän johtajan "
+"prosessi-\n"
+"    tunnuksella.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen paitsi jos on annettu virheellinen valitsin tai \n"
+"    tapahtuu virhe. Jos -x:ää on käytetty, palauttaa KOMENNON paluuarvon."
+
+#: builtins.c:906
+#, fuzzy
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"Poistaa töitä nykyisestä komentotulkista.\n"
+"    \n"
+"    Poistaa kunkin TYÖTUNNISTEEN aktiivisten töiden taulukosta. Ilman\n"
+"    TYÖTUNNISTEITA komentotulkki käyttää omaa arviotaan nykyisestä\n"
+"    työstä.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -a\tpoista kaikki työt ellei TYÖTUNNISTETTA ole annettu\n"
+"      -h\tmerkitse kukin TYÖTUNNISTE siten, ettei niille lähetetä\n"
+"    \tSIGHUPia, jos komentotulkki vastaanottaa sellaisen\n"
+"      -r\tpoista ainoastaan ajossa olevat työt\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen paitsi jos jokin valitsin tai TYÖTUNNISTE on     "
+"virheellinen."
+
+#: builtins.c:925
+#, fuzzy
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Lähetä työlle signaali.\n"
+"    \n"
+"    Lähettää PIDILLÄ tai TYÖTUNNISTEELLA tunnistetulle prosessille\n"
+"    SIGSPECILLÄ tai SIGNUMILLA annetun signaalin. Jos kumpaakaan\n"
+"    ei ole läsnä, käytetään SIGTERMIÄ.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -s sig\tSIG on signaalin nimi\n"
+"      -n sig\tSIG on signaalin numero\n"
+"      -l\tlistaa signaalien nimet; �-l�:n jälkeiset argumentit oletetaan\n"
+"    \tsignaalinumeroiksi, joiden nimet halutaan listata.\n"
+"    \n"
+"    Kill on sisäänrakennettu komento kahdesta syystä: se antaa käyttää\n"
+"    työtunnisteita prosessitunnusten sijaan, ja sallii prosessien "
+"tappamisen\n"
+"    vaikka sallittujen prosessien lukumäärä olisikin ylitetty.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen paitsi jos on annettu virheellinen valitsin tai "
+"tapahtuu virhe."
+
+#: builtins.c:949
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"Laskee matemaattiset lausekkeet.\n"
+"    \n"
+"    Laskee jokaisen ARGUMENTIN matemaattisena lausekkeena. Evaluointi\n"
+"    tehdään kiinteänmittaisina kokonaislukuina ilman ylivuodon "
+"tarkistamista,\n"
+"    vaikkakin nollalla jako havaitaan ja ilmoitetaan virheenä. Seuraava \n"
+"    operaattorilista on ryhmitelty samanarvoisten operaattoreiden ryhmiin. \n"
+"    Evaluointijärjestys on laskeva.\n"
+"    \n"
+"    \tid++, id--\tmuuttujan jälkilisäys, jälkivähennys\n"
+"    \t++id, --id\toperaattorin etulisäys, etuvähennys\n"
+"    \t-, +\t\tunaarinen miinus, plus\n"
+"    \t!, ~\t\tlooginen ja bittitason negaatio\n"
+"    \t**\t\tpotenssiinkorotus\n"
+"    \t*, /, %\t\tkertominen, jakaminen, jakojäännös\n"
+"    \t+, -\t\tlisäys, vähennys\n"
+"    \t<<, >>\t\tbittisiirrot vasemmalle ja oikealle\n"
+"    \t<=, >=, <, >\tvertailu\n"
+"    \t==, !=\t\tyhtäläisyys, epäyhtäläisyys\n"
+"    \t&\t\tbittitason AND\n"
+"    \t^\t\tbittitason XOR\n"
+"    \t|\t\tbittitason OR\n"
+"    \t&&\t\tlooginen AND\n"
+"    \t||\t\tlooginen OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tehdollinen operaattori\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tsijoitus\n"
+"    \n"
+"    Ympäristömuuttujia voidaan käyttää operandeina. Lausekkeessa muuttujan \n"
+"    nimi korvataan sen arvolla (määrämittaiseksi kokonaisluvuksi "
+"pakotettuna).\n"
+"    Muuttujan integer-attribuutin ei tarvitse olla asetettuna.\n"
+"    \n"
+"    Operaattorit evaluoidaan laskennallisessa järjestyksessä. Suluissa "
+"olevat \n"
+"    alilausekkeet evaluoidaan ensin; suluilla voidaan myös muuttaa \n"
+"    edelläkuvattua laskentajärjestystä.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Jos viimeinen ARGUMENTTI evaluoituu nollaksi, let palauttaa 1, muussa\n"
+"    tapauksessa 0."
+
+#: builtins.c:994
+#, fuzzy
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"Lukee rivin vakiosyötteestä ja jakaa sen kenttiin.\n"
+"    \n"
+"    Lukee yksittäisen rivin vakiosyötteestä tai tiedostokahvasta\n"
+"    FD jos käytetään -u -valitsinta. Rivi jaetaan kenttiin kuten sanatkin, "
+"ja \n"
+"    ensimmäinen sana sijoitetaan ensimmäiseen NIMEEN, toinen TOISEEN, ja "
+"niin \n"
+"    edelleen, ylijäävien sanojen sijoittuessa viimeiseen NIMEEN. Sanojen \n"
+"    erottimiksi hyväksytään vain $IFS-muuttujassa ilmoitetut.\n"
+"    \n"
+"    Jos NIMIÄ ei ole annettu, luettu rivi sijoitetaan REPLY-muuttujaan.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -a taulukko\tsijoita sanat järjestyksessä taulukkoon TAULUKKO, alkaen\n"
+"    \t\tindeksistä nolla\n"
+"      -d erotin \tjatka kunnes ensimmäinen EROTTIMEN merkki on luettu, ei\n"
+"    \t\trivinvaihto\n"
+"      -e                käytä readlinea rivin lukemiseksi "
+"interaktiivisessa \n"
+"    \t\tkomentotulkissa\n"
+"      -i teksti\tkäytä TEKSTIÄ readlinen oletustekstinä\n"
+"      -n määrä\t\tpalaa, kun MÄÄRÄ merkkiä on luettu, sen sijaan että \n"
+"    \t\todotetaan rivinvaihtoa\n"
+"      -p kehote\ttulosta KEHOTE ilman rivinvaihtoa ennen lukua\n"
+"      -r\t\tälä salli kenoviivojen käyttöä\n"
+"      -s \t\tälä näytä päätteeltä näppäiltyjä merkkejä\n"
+"      -t aikaraja\tkeskeytä ja palauta epäonnistuminen jos kokonaista riviä\n"
+"    \t\tei saada luettua sekunneissa ilmoitetun AIKARAJAN puitteissa.\n"
+"    \t\tMuuttujan TMOUT arvo on oletusarvo. AIKARAJA voi olla \n"
+"    \t\treaaliluku.\n"
+"\t\tJos AIKARAJA on 0, read palauttaa onnistumisen vain jos syöte on\n"
+"\t\tvalmiina annetussa tiedostokahvassa. Paluuarvo on suurempi \n"
+"    \t\tkuin 128 jos aikaraja ylittyy\n"
+"      -u FD\t\tlue tiedostokahvasta FD vakiosyötetiedoston sijaan\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Paluuarvo on nolla, ellei törmätä tiedoston loppumiseen, aikarajan\n"
+"    ylitykseen tai mikäli -u:lle annetaan virheellinen tiedostokahva."
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"Palauttaa komentotulkin funktiosta.\n"
+"    \n"
+"    Aiheuttaa funktion tai luetun skriptin poistumisen annetulla "
+"paluuarvolla N.\n"
+"    Jos N:ää ei ole annettu, palautetaan viimeisen funktiossa tai "
+"skriptissä\n"
+"    suoritetun komennon paluuarvo.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa N:n, tai epäonnistuneen mikäli komentotulkki ei ole "
+"suorittamassa\n"
+"    funktiota tai skriptiä."
+
+#: builtins.c:1054
+#, fuzzy
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"Asettaa tai poistaa komentotulkin valitsimia ja positionaalisia "
+"parametreja.\n"
+"    \n"
+"    Muuttaa komentotulkin attribuutteja ja positionaalisia parametreja, tai\n"
+"    näyttää komentotulkin muuttujien nimet ja arvot.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -a  Merkitse luodut tai muutetut parametrit vientiä varten.\n"
+"      -b  Ilmoita työn päättymisestä välittömästi.\n"
+"      -e  Poistu välittömästi jos komento palauttaa nollasta poikkeavan "
+"arvon.\n"
+"      -f  Poista tiedostonimen lavennus käytöstä.\n"
+"      -h  muista komentojen sijainti sitä mukaa kun niitä etsitään.\n"
+"      -k  kaikki asetukset sijoitetaan komennon ympäristöön, ei vain ne,\n"
+"          jotka ovat ennen komennon nimeä.\n"
+"      -m  Työnohjaus on käytössä.\n"
+"      -n  Lue komennot mutta älä suorita niitä.\n"
+"      -o  valitsimen nimi\n"
+"           Aseta muuttuja valitsimen nimen mukaan:\n"
+"               allexport\tsama kuin -a\n"
+"               braceexpand\tsama kuin -B\n"
+"               emacs\t\tkäytä emacs-tyylistä rivieditointia\n"
+"               errexit\t\tsama kuin -e\n"
+"               errtrace\t\tsama kuin -E\n"
+"               functrace\tsama kuin -T\n"
+"               hashall\t\tsama kuin -h\n"
+"               histexpand\tsama kuin -H\n"
+"               history\t\tota komentohistoria käyttöön\n"
+"               ignoreeof\tkomentotulkki ei poistu syötteen loppuessa\n"
+"               interactive-comments\n"
+"                                sallii kommentit interaktiivisissa "
+"komennoissa\n"
+"               keyword\t\tsama kuin -k\n"
+"               monitor\t\tsama kuin -m\n"
+"               noclobber\tsama kuin -C\n"
+"               noexec\t\tsama kuin -n\n"
+"               noglob\t\tsama kuin -f\n"
+"               nolog\t\ttällä hetkellä hyväksytty mutta ei huomioida\n"
+"               notify\t\tsama kuin -b\n"
+"               nounset\t\tsama kuin -u\n"
+"               onecmd\t\tsama kuin -t\n"
+"               physical\t\tsama kuin -P\n"
+"               pipefail\t\tkomentoputken paluuarvo on viimeisen nollasta\n"
+"               \t\t\tpoikkeavan komennon paluuarvo, tai nolla jos\n"
+"               \t\t\tmikään komento ei palauttanut nollasta \n"
+"               \t\t\tpoikkeavaa\n"
+"               posix\t\tmuuta bashin toiminta vastaamaan Posixia\n"
+"               privileged\tsama kuin -p\n"
+"               verbose\t\tsama kuin -v\n"
+"               vi\t\tkäytä vi-tyylistä komentorivieditointia\n"
+"               xtrace\t\tsama kuin -x\n"
+"      -p  Asetetaan jos todellinen ja efektiivinen uid eivät täsmää.\n"
+"          Poistaa $ENV-tiedoston käsittelyn ja funktioiden tuonnin "
+"käytöstä.\n"
+"          Tämän valitsimen poistaminen aiheuttaa efektiivisen uid:n ja gid:"
+"n\n"
+"          (käyttäjä- ja ryhmätunnus) asettamisen todelliseksi uid:ksi ja \n"
+"          gid:ksi.\n"
+"      -t  Poistu yhden komennon lukemisen ja suorittamisen jälkeen.\n"
+"      -u  Kohtele asettamattomia muuttujia virheenä korvauksen yhteydessä.\n"
+"      -v  Tulosta komentotulkin syöterivit lukemisen myötä.\n"
+"      -x  Tulosta komennot argumentteineen niitä suoritettaessa.\n"
+"      -B  Komentotulkki suorittaa aaltosulkeitten laajentamisen\n"
+"      -C  Jos asetettu, estää tavallisten tiedostojen päällekirjoittamisen\n"
+"          uudelleenohjauksella.\n"
+"      -E  Jos asetettu, ERR-kaappaus periytyy funktioihin\n"
+"      -H  Ota !-tyylinen historian korvaus käyttöön. Tämä on "
+"oletusarvoisesti\n"
+"          päällä, mikäli komentotulkki on interaktiivinen.\n"
+"      -P  Jos asetettu, älä seuraa symbolisia linkkejä suoritettaessa\n"
+"          hakemistoa vaihtavia komentoja, kuten cd.\n"
+"      -T  Jos asetettu, funktiot perivät DEBUG-kaappauksen\n"
+"      -   Sijoita loput argumentit positionaalisiin parametreihin. -x - ja \n"
+"          -v -optiot poistetaan käytöstä.\n"
+"    \n"
+"    Mikäli käytetään �+�-merkkiä �-�:n sijaan, optiot otetaan pois päältä.\n"
+"    Valitsimet voidaan myös asettaa komentotulkin käynnistyksessä.\n"
+"    Asetetut valitsimet löytyvät muuttujasta $-. Loput N ARGUMENTTIA ovat\n"
+"    positionaalisia parametreja ja asetetaan järjestyksessä muuttujiin\n"
+"    $1, $2, .. $N. Jos argumentteja ei ole annettu, tulostetaan kaikki\n"
+"    ympäristömuuttujat.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistumisen ellei ole annettu virheellistä valitsinta."
+
+#: builtins.c:1139
+#, fuzzy
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"Poista ympäristömuuttujien ja funktioiden arvoja ja attribuutteja.\n"
+"\n"
+"    Poista jokaisen NIMI-niminen muuttuja tai funktio.\n"
+"\n"
+"    Valitsimet:\n"
+"      -f\tkohtele jokaista NIMEÄ funktiona\n"
+"      -v\tkohtele jokaista NIMEÄ muuttujana\n"
+"    \n"
+"    Ilman valitsimia unset yrittää ensin poistaa muuttujan, ja mikäli se\n"
+"    epäonnistuu, yrittää poistaa funktion.\n"
+"    \n"
+"    Joitain muuttujia ei voi poistaa; katso myös �readonly�.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen paitsi jos on annettu virheellinen valitsin\n"
+"    tai NIMI on kirjoitussuojattu."
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Aseta ympäristömuuttujien vientiattribuutin.\n"
+"    \n"
+"    Merkitse kukin NIMI vietäväksi automaattisesti suoritettujen komentojen\n"
+"    ympäristöön. Jos ARVO on annettu, se sijoitetaan NIMEEN ennen vientiä.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -f\tviittaa komentotulkin funktioihin\n"
+"      -n\tpoista jokaiselta NIMELTÄ vientiattribuutti\n"
+"      -p\tlistaa kaikki viedyt muuttujat ja funktiot\n"
+"    \n"
+"    �--� argumenttina lopettaa valitsimien käsittelyn.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen paitsi jos on annettu virheellinen valitsin\n"
+"    tai NIMI on virheellinen."
+
+#: builtins.c:1180
+#, fuzzy
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Merkitse ympäristömuuttujat kirjoitussuojatuiksi.\n"
+"    \n"
+"    Merkitse kukin NIMI kirjoitussuojatuksi; näiden NIMIEN arvoa ei voi\n"
+"    muuttaa. Jos ARVO on annettu, sijoita se NIMEEN ennen merkitsemistä\n"
+"    kirjoitussuojatuksi.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -a\tviittaa indeksoidun taulukon muuttujiin\n"
+"      -A\tviittaa assosiatiivisen taulukon muuttujiin\n"
+"      -f\tviittaa funktioihin\n"
+"      -p\tnäytä lista kirjoitussuojatuista muuttujista ja funktioista\n"
+"    \n"
+"    Argumentti �--� päättää valitsimien käsittelyn.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen paitsi jos on annettu virheellinen valitsin\n"
+"    tai NIMI on virheellinen."
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"Siirrä positionaalisia parametreja.\n"
+"    \n"
+"    Siirrä positionaalisia parametreja $N+1, $N+2 ... parametreihin $1, "
+"$2 ...\n"
+"    Jos N:ää ei ole annettu, sen oletetaan olevan 1.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen ellei N ole negatiivinen tai suurempi kuin $#."
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Suorittaa tiedoston komennot nykyisessä komentotulkissa.\n"
+"    \n"
+"    Lue ja suorita komennot TIEDOSTOSTA nykyisessä tulkissa. $PATH:in\n"
+"    komponentteja käytetään TIEDOSTON sisältävän hakemiston haussa.\n"
+"    Mahdolliset ARGUMENTIT sijoitetaan positionaalisiksi parametreiksi\n"
+"    TIEDOSTOA suoritettaessa.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa viimeisen TIEDOSTON suoritetun komennon paluuarvon; "
+"epäonnistuu\n"
+"    mikäli TIEDOSTOA ei voida lukea."
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Keskeyttää komentotulkin suorituksen.\n"
+"    \n"
+"    Keskeyttää tämän tulkin suorituksen kunnes se saa SIGCONT-signaalin.\n"
+"    Sisäänkirjautumistulkkeja ei voi keskeyttää kuin väkisin.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -f\tpakota keskeyttämään, vaikka tulkki olisi sisäänkirjautumis-\n"
+"        \ttulkki.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen paitsi jos työnohjaus ei ole käytössä tai "
+"tapahtuu\n"
+"    virhe."
+
+#: builtins.c:1261
+#, fuzzy
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"Evaluoi ehdollisen lausekkeen.\n"
+"    \n"
+"    Poistuu arvolla 0 (tosi) tai 1 (epätosi) riippuen LAUSEKKEEN "
+"evaluoinnista.\n"
+"    Lausekkeen voivat olla unaarisia tai binäärisiä. Unaarisia lausekkeita\n"
+"    käytetään usein tarkistamaan tiedoston tila. On myös merkkijono-\n"
+"    operaattoreita, ja operaattoreita numeroiden vertailuun.\n"
+"    \n"
+"    Tiedosto-operaattorit:\n"
+"    \n"
+"      -a TIEDOSTO        Tosi jos tiedosto on olemassa.\n"
+"      -b TIEDOSTO        Tosi jos tiedosto on lohkolaite.\n"
+"      -c TIEDOSTO        Tosi jos tiedosto on merkkilaite.\n"
+"      -d TIEDOSTO        Tosi jos tiedosto on hakemisto.\n"
+"      -e TIEDOSTO        Tosi jos tiedosto on olemassa.\n"
+"      -f TIEDOSTO        Tosi jos tiedosto on olemassa ja on tavallinen "
+"tiedosto.\n"
+"      -g TIEDOSTO        Tosi jos tiedostolla on set-group-id -bitti.\n"
+"      -h TIEDOSTO        Tosi jos tiedosto on symbolinen linkki.\n"
+"      -L TIEDOSTO        Tosi jos tiedosto on symbolinen linkki.\n"
+"      -k TIEDOSTO        Tosi jos tiedostolla on sticky-bitti.\n"
+"      -p TIEDOSTO        Tosi jos tiedosto on nimetty putki.\n"
+"      -r TIEDOSTO        Tosi jos sinulla on lukuoikeus tiedostoon.\n"
+"      -s TIEDOSTO        Tosi jos tiedosto on olemassa eikä se ole tyhjä.\n"
+"      -S TIEDOSTO        Tosi jos tiedosto on soketti.\n"
+"      -t FD                    Tosi jos FD on avattu päätteeseen.\n"
+"      -u TIEDOSTO        Tosi jos tiedostolla on set-user-id -bitti.\n"
+"      -w TIEDOSTO        Tosi jos sinulla on kirjoitusoikeus tiedostoon.\n"
+"      -x TIEDOSTO        Tosi jos sinulla on tiedoston suoritusoikeus.\n"
+"      -O TIEDOSTO        Tosi jos omistat tiedoston.\n"
+"      -G TIEDOSTO        Tosi jos ryhmäsi omistaa tiedoston.\n"
+"      -N TIEDOSTO        Tosi jos tiedostoa on muokattu viimeisen "
+"lukukerran\n"
+"                         jälkeen.\n"
+"    \n"
+"      TIEDOSTO1 -nt TIEDOSTO2  Tosi jos TIEDOSTO1 on uudempi kuin TIEDOSTO2\n"
+"                               (muutospäivän perusteella).\n"
+"    \n"
+"      TIEDOSTO1 -ot TIEDOSTO2  Tosi jos TIEDOSTO1 on vanhempi kuin "
+"TIEDOSTO2.\n"
+"    \n"
+"      TIEDOSTO1 -ef TIEDOSTO2  Tosi jos TIEDOSTO1 on kovolinkki TIEDOSTO2:"
+"een.\n"
+"    \n"
+"    Merkkijono-operaattorit:\n"
+"    \n"
+"      -z JONO      Tosi jos JONO on tyhjä.\n"
+"    \n"
+"      -n JONO\n"
+"         JONO      Tosi jos JONO ei ole tyhjä.\n"
+"    \n"
+"      JONO1 = JONO2\n"
+"                     Tosi jos JONOT ovat samat.\n"
+"      JONO1 != JONO2\n"
+"                     Tosi jos JONOT eivät ole samat.\n"
+"      JONO1 < JONO2\n"
+"                     Tosi jos JONO1 aakkostuu ennen JONO2:ta.\n"
+"      JONO1 > JONO2\n"
+"                     Tosi jos JONO1 aakkostuu JONO2:n jälkeen.\n"
+"    \n"
+"    Muut operaattorit:\n"
+"    \n"
+"      -o VALITSIN    Tosi jos tulkin VALITSIN on käytössä.\n"
+"      ! LAUSEKE      Tosi jos LAUSEKE on epätosi.\n"
+"      LAUSEKE1 -a LAUSEKE2 \n"
+"                     Tosi jos molemmat lausekkeet ovat tosia.\n"
+"      LAUSEKE1 -o LAUSEKE2 \n"
+"                     Tosi jos jompikumpi lausekkeista on tosi.\n"
+"    \n"
+"      ARG1 OP ARG2   Aritmeettiset testit. OP on jokin seuraavista:\n"
+"      \t       \t       -eq, -ne, -lt, -le, -gt tai -ge.\n"
+"    \n"
+"    Binääriset aritmetiikkaoperaattorit palauttavat toden jos ARG1 on \n"
+"    yhtäsuuri, erisuuri, pienempi, pienempi tai yhtä suuri, suurempi\n"
+"    tahi suurempi tai yhtä suuri kuin ARG2.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistumisen jos LAUSEKE evaluoituu todeksi; epäonnistuu jos\n"
+"    LAUSEKE evaluoituu vääräksi tai on annettu virheellinen argumentti."
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Evaluoi ehdollisen lausekkeen.\n"
+"    \n"
+"    Tämä on sisäänrakennetun �test�-komennon synonyymi, mutta viimeisen\n"
+"    argumentin pitää olla �]�, joka sulkee avaavan �[�:n."
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Näyttää prosessiajat.\n"
+"    \n"
+"    Tulostaa kumuloituneet käyttäjä- ja järjestelmäajat sekä "
+"komentotulkille\n"
+"    että kaikille sen lapsiprosesseille.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Onnistuu aina."
+
+#: builtins.c:1364
+#, fuzzy
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"Kaappaa signaalit ja muut poikkeamat.\n"
+"    \n"
+"    Määrittelee ja aktivoi käsittelijöitä, jotka suoritetaan kun "
+"komentotulkki\n"
+"    saa signaalin tai muissa tilanteissa.\n"
+"    \n"
+"    ARGUMENTTI on luettava ja suoritettava komento kun tulkki saa \n"
+"    SIGNAALIissa määritellyn signaalin/signaalit. Jos ARGUMENTTI puuttuu\n"
+"    (ja vain yksittäinen SIGNAALI on annettu) tai on �-�, kukin määrätty\n"
+"    signaali palautetaan oletusarvoonsa. Jos ARGUMENTTI on tyhjä "
+"merkkijono,\n"
+"    tulkki ja sen käynnistämät komennot jättävät annetut signaalit "
+"huomiotta.\n"
+"    \n"
+"    Jos SIGNAALI on EXIT (0), ARGUMENTTI suoritetaan tulkin poistuessa.\n"
+"    Jos SIGNAALI on DEBUG, ARGUMENTTI suoritetaan ennen jokaista "
+"yksittäistä\n"
+"    komentoa.\n"
+"    \n"
+"    Jos argumentteja ei ole annettu, trap tulostaa kuhunkin signaaliin "
+"liitetyt\n"
+"    komennot.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -l\ttulostaa listan signaalien nimistä ja vastaavista numeroista\n"
+"      -p\ttulostaa kuhunkin signaaliin liitetyt kaappauskomennot\n"
+"    \n"
+"    Kukin SIGNAALI on joko signaalin nimi <signal.h>-tiedostossa tai "
+"numero.\n"
+"    Signaalien nimet eivät ole aakkoslajillisia ja alkuosa SIG on "
+"valinnainen.\n"
+"    Signaali lähetetään tulkille komennolla �kill -signal $$�.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneet paitsi jos SIGNAALI on virheellinen tai on "
+"annettu\n"
+"    virheellinen valitsin."
+
+#: builtins.c:1400
+#, fuzzy
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"Näyttää tietoja komentotyypistä.\n"
+"    \n"
+"    Näyttää, miten kukin NIMI tulkittaisiin, jos sitä käytettäisiin "
+"komentona.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -a\tnäyttää kaikki paikat, jossa on NIMI-niminen ohjelma; sisältää\n"
+"        \taliakset, sisäänrakennetut komennot ja funktiot, jos ja vain\n"
+"        \tjos -p -valitsinta ole käytetty\n"
+"      -f\testää funktiohaun\n"
+"      -P\tpakottaa hakemaan NIMET hakupolulta, vaikka se olisikin alias,\n"
+"        \tsisäänrakennettu komento, tai funktio, ja palauttaa \n"
+"        \tsuoritettavan levytiedoston nimen\n"
+"      -p\tpalauttaa joko suoritettavan levytiedoston nimen, tai ei mitään\n"
+"        \tjos �type -t NIMI� ei palauttaisi �file�.\n"
+"      -t\ttulosta sana, joka on �alias�, �keyword�, �function�,\n"
+"        \t�builtin�, �file� tai ��, jos NIMI on alias,\n"
+"        \tavainsana, funktio, sisäänrakennettu komento, levytiedosto tai\n"
+"        \tsitä ei löytynyt.\n"
+"    \n"
+"    Argumentit:\n"
+"      NIMI\tTulkittavan komennon nimi.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen mikäli kaikki NIMET löytyivät, muussa tapauksessa\n"
+"    epäonnistuu."
+
+#: builtins.c:1431
+#, fuzzy
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Muuttaa komentotulkin resurssirajoituksia.\n"
+"    \n"
+"    Antaa kontrollin tulkin ja sen luomien prosessien resursseille \n"
+"    järjestelmissä, jossa se on mahdollista.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -S\tkäytä �pehmeää� resurssirajaa\n"
+"      -H\tkäytä �kovaa� resurssirajaa\n"
+"      -a\traportoi nykyiset rajat\n"
+"      -b\tsoketin puskurikoko\n"
+"      -c\tluotujen core-tiedostojen maksimikoko\n"
+"      -d\tprosessin datasegmentin maksimikoko\n"
+"      -e\tylin skedulointiprioriteetti (�nice�-arvo)\n"
+"      -f\tkomentotulkin ja sen lapsiprosessien kirjoittamien tiedostojen\n"
+"        \tmaksimikoko\n"
+"      -i\todottavien signaalien maksimimäärä\n"
+"      -l\tprosessin lukitseman muistin maksimikoko\n"
+"      -m\tmuistinvaraisen joukon maksimikoko\n"
+"      -n\tavointen tiedostokahvojen maksimimäärä\n"
+"      -p\tputken puskurikoko\n"
+"      -q\tPOSIX-viestijonoissa olevien tavujen maksimi\n"
+"      -r\tsuurin reaaliaikaskedulointi-prioriteetti\n"
+"      -s\tpinon maksimikoko\n"
+"      -t\tenin CPU-aika sekunneissa\n"
+"      -u\tkäyttäjäprosessien maksimimäärä\n"
+"      -v\tvirtuaalimuistin koko\n"
+"      -x\ttiedostolukitusten maksimimäärä\n"
+"    \n"
+"    Jos RAJA on annettu, se on määrätyn resurssin uusi arvo; RAJAN "
+"erikoisarvot\n"
+"    �soft�, �hard� ja �unlimited� tarkoittavat nykyistä pehmeää, kovaa ja\n"
+"    rajatonta. Muussa tapauksessa tulostetaan annetun resurssin arvo. Jos\n"
+"    valitsimia ei ole annettu, oletetaan -f.\n"
+"    \n"
+"    Arvon ovat 1024 tavun monikertoja, paitsi -t:n, joka on sekuntteja,\n"
+"    -p, jota kasvatetaan 512 tavun osissa, ja -u, joka on prosessien \n"
+"    skaalaamaton määrä.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen paitsi jos on annettu virheellinen valitsin\n"
+"    tai tapahtuu virhe."
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"Näyttää tai asettaa tiedoston tilamaskin.\n"
+"    \n"
+"    Asettaa käyttäjän tiedostonluontimaskin TILAKSI. Jos TILAA ei ole \n"
+"    annettu, tulostaa maskin nykyisen arvon.\n"
+"    \n"
+"    Jos TILA alkaa numerolla, se käsitellään oktaalinumerona; muussa\n"
+"    tapauksessa se on symbolinen tilamerkkijono jonka chmod(1) hyväksyy.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -p\tjos TILAA ei ole annettu, tulostetaan hyödynnettävässä\n"
+"        \tmuodossa\n"
+"      -S\ttulostaa symbolisena; muussa tapauksessa tulostetaan\n"
+"        \toktaaliluku\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen ellei TILA ole virheellinen tai on annettu \n"
+"    virheellinen valitsin."
+
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"Odottaa työn valmistumista ja palauttaa paluuarvon.\n"
+"    \n"
+"    Odottaa ID:llä tunnistettua prosessia, joka (ID) voi olla "
+"prosessitunnus\n"
+"    tai työtunniste, ja palauttaa sen paluuarvon. Jos ID:tä ei ole annettu,\n"
+"    odottaa kaikkia tällä hetkellä aktiivisia lapsiprosesseja, ja paluuarvo\n"
+"    on nolla. Jos ID on työtunniste, odottaa kaikkia prosesseja työn "
+"komento-\n"
+"    putkessa.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa ID:n tilan; epäonnistuu jos ID on virheellinen tai on annettu\n"
+"    virheellinen valitsin."
+
+#: builtins.c:1533
+#, fuzzy
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"Odottaa työn valmistumista ja palauttaa paluuarvon.\n"
+"    \n"
+"    Odottaa annettua prosessia ja palauttaa sen paluuarvon. Jos prosessi-\n"
+"    tunnistetta (PID) ei ole annettu, odottaa kaikkia tällä hetkellä "
+"aktiivisia \n"
+"    lapsiprosesseja, ja paluuarvo on nolla.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa ID:n tilan; epäonnistuu jos ID on virheellinen tai on annettu\n"
+"    virheellinen valitsin."
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Suorittaa komennot listan jokaiselle jäsenelle.\n"
+"    \n"
+"    �For�-silmukka suorittaa komentoketjun listan jokaiselle alkiolle. Jos\n"
+"    �in SANAT ...;� ei ole annettu, käytetään rakennetta �in $@�. NIMI "
+"asetetaan\n"
+"    vuorollaan jokaiseksi SANAT-listan alkioksi, ja KOMENNOT suoritetaan.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Viimeisen suoritetun komennon paluuarvo."
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Aritmeettinen for-silmukka.\n"
+"    \n"
+"    Vastaa\n"
+"    \t(( LAUSEKE1))\n"
+"    \twhile (( LAUSEKE2 )); do\n"
+"    \t\tKOMENNOT\n"
+"    \t\t(( LAUSEKE3 ))\n"
+"    \tdone\n"
+"\n"
+"    LAUSEKE1, LAUSEKE2 ja LAUSEKE3 ovat aritmeettisiä lausekkeita. Jos "
+"jokin\n"
+"    lauseke on jätetty pois, se tulkitaan 1:ksi.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Viimeisen suoritetun komennon paluuarvo."
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Valitsee sanat listasta ja suorittaa komennot.\n"
+"    \n"
+"    SANAT lavennetaan, jolloin saadaan sanalista. Lavennettujen sanojen "
+"joukko\n"
+"    tulostetaan vakiovirhetulosteeseen juoksevasti numeroituna. Jos �in "
+"SANAT�\n"
+"    puuttuu, käytetään rakennetta �in $@�. Tämän jälkeen tulostetaan \n"
+"    PS3-kehote ja vakiosyötteestä luetaan rivi. Mikäli rivi koostuu \n"
+"    numerosta joka vastaa jotakin tulostetuista sanoista, asetetaan NIMEN \n"
+"    arvoksi kyseinen sana. Jos rivi on tyhjä, SANAT ja kehote tulostetaan \n"
+"    uudelleen. Mikäli saadaan EOF (tiedoston loppu), komento päättyy.\n"
+"    Mikä tahansa muu luettu arvo aiheuttaa NIMEN tyhjäämisen. Luettu rivi \n"
+"    tallennetaan REPLY-muuttujaan. KOMENNOT suoritetaan kunkin valinnan \n"
+"    jälkeen kunnes suoritetaan break-komento.\n"
+"\n"
+"    Paluuarvo:\n"
+"    Viimeisen suoritetun komennon paluuarvo."
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"Raportoi komentoketjun suoritusajan.\n"
+"    \n"
+"    Suorita KOMENTOKETJU ja tulosta yhteenveto käytetystä ajasta, käyttäjän\n"
+"    CPU-ajasta ja järjestelmän CPU-ajasta KOMENTOKETJUA suoritettaessa sen\n"
+"    päätyttyä.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -p\ttulosta ajastusyhteenveto siirrettävässä POSIX-muodossa.\n"
+"  \n"
+"    Tulosteen muotoilussa käytetään TIMEFORMAT-muuttujan arvoa.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    KOMENTOKETJUN paluuarvo."
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Suorittaa komentoja tekstihaun perusteella.\n"
+"    \n"
+"    Suorittaa valikoiden KOMENTOJA perustuen SANAAN joka sopii "
+"MALLINEESEEN.\n"
+"    �|�:ea käytetään erottamaan mallineita.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Viimeisen suoritetun komennon paluuarvo."
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Suorittaa komentoja ehdollisesti.\n"
+"    \n"
+"    �if KOMENNOT�-lista suoritetaan. Jos sen paluuarvo on nolla, "
+"suoritetaan\n"
+"    �then KOMENNOT�-lista. Muussa tapauksessa suoritetaan vuorollaan\n"
+"    kukin �elif KOMENNOT�-lista, ja jos sen paluuarvo on nolla, suoritetaan\n"
+"    vastaava �then KOMENNOT�-lista ja if-komento päätetään. Muutoin\n"
+"    suoritetaan �else KOMENNOT�-lista, jos sellainen on. Koko rakenteen\n"
+"    paluuarvo on viimeisen komennon paluuarvo tai nolla, jos mikään ehto\n"
+"    ei toteutunut.\n"
+"\n"
+"    Paluuarvo:\n"
+"    Viimeisen suoritetun komennon paluuarvo."
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Suorittaa komentoja niin kauan kun testi onnistuu.\n"
+"    \n"
+"    Laventaa ja suorittaa KOMENTOJA niin kauan kun viimeinen komento\n"
+"    �while KOMENNOT� palauttaa nollan.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Viimeisen komennon paluuarvo."
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Suorittaa komentoja niin kauan kun testi epäonnistuu.\n"
+"    \n"
+"    Laventaa ja suorittaa KOMENTOJA niin kauna kun viimeinen komento\n"
+"    �until KOMENNOT� palauttaa nollasta poikkeavan paluuarvon.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Viimeisen suoritetun komennon paluuarvo."
+
+#: builtins.c:1671
+#, fuzzy
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"Luo NIMI-nimisen rinnakkaisprosessin.\n"
+"    \n"
+"    Suorittaa KOMENNON asynkronisesti, vakiotuloste ja vakiosyöte\n"
+"    ohjattuna putken kautta tiedostokahvoihin suorittavan tulkin NIMI-"
+"nimisen\n"
+"    taulukon indekseihin 0 ja 1. Oletus-NIMI on �COPROC�.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    KOMENNON paluuarvo."
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"Luo funktion.\n"
+"    \n"
+"    Luo komentotulkin funktion NIMI. Jos NIMI käynnistetään komentona,\n"
+"    KOMENNOT ajetaan kutsuvan tulkin ympäristössä. Kun NIMI käynnistetään,\n"
+"    sen argumentit välitetään parametreina $1...$n, ja funktion nimi\n"
+"    sijoitetaan muuttujaan $FUNCNAME.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Onnistuu, ellei NIMI ole kirjoitussuojattu."
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Ryhmittää komennot.\n"
+"    \n"
+"    Suorittaa komennot ryhmässä. Tämä on eräs tapa uudelleenohjata "
+"kokonaisen\n"
+"    komentojoukon tulosteet.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Viimeisen suoritetun komennon paluuarvo."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"Siirtää komennon edustalle.\n"
+"    \n"
+"    Sama kuin �fg�-komennon TYÖNKUVAAJA-argumentti. Jatkaa joko "
+"keskeytettyä\n"
+"    tai taustatyötä. TYÖNKUVAAJA voi määritellä joko työn nimen tai "
+"numeron.\n"
+"    Jos TYÖNKUVAAJAA seuraa �&� siirretään työ taustalle, kuten jos "
+"työnkuvaaja\n"
+"    olisi annettu �bg�-komennon argumentiksi.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Työn tila."
+
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Evaluoi artimeettinen lauseke.\n"
+"    \n"
+"    LAUSEKKEEN arvo evaluoidaan laskentasääntöjen mukaisesti. Sama kuin\n"
+"    �let LAUSEKE�.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa 1, jos LAUSEKKEEN arvo on 0; muuten palauttaa 0."
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"Suorittaa ehdollisen komennon.\n"
+"    \n"
+"    Palauttaa 0 tai 1 riippuen ehdollisen LAUSEKKEEN tuloksesta. "
+"Lausekkeissa\n"
+"    käytetään samoja primäärejä kuin sisäänrakennetussa �test�-komennossa,\n"
+"    ja voidaan yhdistellä seuraavilla operaattoreilla:\n"
+"    \n"
+"      ( LAUSEKE )\tPalauttaa LAUSEKKEEN arvon\n"
+"      ! LAUSEKE\t\tTosi jos LAUSEKE on epätosi; muuten epätosi\n"
+"      LAUSEKE1 && LAUSEKE2\tTosi jos molemmat lausekkeet ovat tosia, muuten\n"
+"               \t\tepätosi\n"
+"      LAUSEKE1 || LAUSEKE2\tTosi jos jompikumpi lausekkeista on tosi,\n"
+"      \t\t\tmuuten epätosi\n"
+"    \n"
+"    Käytettäessä �==�- ja �!=�-operaattoreita oikeanpuoleista merkkijonoa \n"
+"    käytetään mallineena ja suoritetaan haku sen perusteella. Operaattoria\n"
+"    �=~� käytettäessä oikeanpuoleinen merkkijonoa käsitellään kuten "
+"säännöllistä\n"
+"    lauseketta.\n"
+"\n"
+"    Operaattorit �&&� ja �||� eivät evaluoi LAUSEKETTA2 jos LAUSEKE1 "
+"riittää\n"
+"    lausekkeen arvon päättelyyn.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    0 tai 1 riippuen LAUSEKKEEN arvosta."
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"Yleisiä komentotulkin muuttujia ja niiden käyttö.\n"
+"    \n"
+"    BASH_VERSION\tTämän Bashin versiotiedot.\n"
+"    CDPATH\tKaksoispistein eroteltu lista hakemistoista, joista etsitään\n"
+"    \t\t�cd�-komennolle argumentiksi annettua hakemistoa.\n"
+"    GLOBIGNORE\tKaksoispistein eroteltu lista mallineista, joihin sopivat\n"
+"    \t\ttiedostonimet jätetään huomiotta polun laventamisessa.\n"
+"    HISTFILE\tTiedosto, johon komentohistoriasi tallennetaan.\n"
+"    HISTFILESIZE\tMaksimi rivimäärä tähän tiedostoon tallennetaan.\n"
+"    HISTSIZE\tTulkin käytettävissä olevien historiarivien maksimimäärä\n"
+"    HOME\tTäydellinen polku sisäänkirjautumishakemistoosi.\n"
+"    HOSTNAME\tNykyisen palvelimen nimi.\n"
+"    HOSTTYPE\tCPU-tyyppi, jonka alaisuudessa tämä Bash-versio on ajossa.\n"
+"    IGNOREEOF\tKontrolloi, miten tulkki toimii saadessaan syötteenä pelkän\n"
+"    \t\tEOF:n (tiedoston loppu). Jos asetettu, sen määrittelemä\n"
+"    \t\tlukumäärä EOF:iä voidaan lukea syötteenä peräkkäin ennenkuin\n"
+"    \t\ttulkki poistuu (oletuksena 10). Jos ei ole asetettu, EOF\n"
+"    \t\tmerkitsee syötteen loppua.\n"
+"    MACHTYPE\tJärjestelmää kuvaava merkkijono.\n"
+"    MAILCHECK\tMiten monen sekunnein välein Bash tarkistaa uudet postit.\n"
+"    MAILPATH\tKaksoispistein eroteltu lista tiedostoista joista Bash\n"
+"    \t\ttarkistaa uudet postit.\n"
+"    OSTYPE\tJärjestelmän Unix-versio.\n"
+"    PATH\tKaksoispistein eroteltu lista hakemistoista, joista etsitään\n"
+"    \t\tkomentoja.\n"
+"    PROMPT_COMMAND\tEnnen primäärin kehotteen tulostamista suoritettava\n"
+"    \t\tkomento.\n"
+"    PS1\t\tPrimääri komentokehote.\n"
+"    PS2\t\tSekundääri kehote.\n"
+"    PWD\t\tNykyisen hakemiston täydellinen polkunimi.\n"
+"    SHELLOPTS\tKaksoispistein eroteltu lista käytössä olevista tulkin\n"
+"    \t\tvalitsimista.\n"
+"    TERM\tKäytettävän päätetyypin nimi.\n"
+"    TIMEFORMAT\t�time�-käskyn tulosteen muotoilumalline.\n"
+"    auto_resume\tJos ei tyhjä, ensimmäistä rivillä olevaa komentosanaa "
+"etsitään\n"
+"    \t\tkeskeytettyjen töiden listasta. Jos sana löydetään, kyseinen\n"
+"    \t\ttyö tuodaan esiin. �exact�-arvo tarkoittaa, että komentosanan\n"
+"    \t\tpitää olla täysin sama kuin keskeytettyjen listalta löytyvä.\n"
+"    \t\tArvo �substring� tarkoittaa että komentosanan pitää olla\n"
+"    \t\tosa työnimeä. Mikä tahansa muu tarkoittaa että komennon pitää\n"
+"    \t\tolla keskeytetyn työn nimen alkuosa.\n"
+"    histchars\tMerkit, jotka ohjaavat historialistasta hakua ja "
+"pikakorvausta.\n"
+"    \t\tEnsimmäinen merkki on historiakorvausmerkki, tavallisesti �!�.\n"
+"    \t\tToinen, pikakorvausmerkki, on yleensä �^�. Kolmas merkki,\n"
+"    \t\ttavallisesti �#�, on historiakommentti.\n"
+"    HISTIGNORE\tKaksoispistein eroteltu lista mallineista, joita käytetään\n"
+"    \t\tpäätettäessä komentojen tallentamisesta historialistaan.\n"
+
+#: builtins.c:1821
+#, fuzzy
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Lisää hakemistoja pinoon.\n"
+"    \n"
+"    Lisää hakemiston hakemistopinon päällimmäiseksi, tai kierrättää pinoa,\n"
+"    jolloin nykyhakemisto siirretään pinon päällimmäiseksi. Ilman "
+"argumentteja\n"
+"    vaihtaa pinon kaksi päällimmäistä keskenään.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -n\tJättää normaalin hakemiston vaihdon tekemättä lisättäessä\n"
+"      \t\thakemistoja pinoon, joten ainoastaan pinoa muokataan.\n"
+"    \n"
+"    Argumentit:\n"
+"      +N\tKierrättää pinoa niin, että N:s hakemisto (laskien vasemmalta\n"
+"      \t\t�dirs�-komennon tuottamasta listasta, alkaen nollasta) on\n"
+"      \t\tpinon päällimmäisenä.\n"
+"      -N\tKierrättää pinoa niin, että N:s hakemisto (laskien oikealta\n"
+"      \t\t�dirs�-komennon tuottamasta listasta, alkaen nollasta) on\n"
+"      \t\tpinon päällimmäisenä.\n"
+"      HAKEM\tLisää HAKEMIN hakemistopinon päällimmäiseksi ja tekee \n"
+"      \t\tsiitä työhakemiston.\n"
+"    \n"
+"    Sisäänrakennettu �dirs� näyttää hakemistopinon.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen, paitsi jos on annettu virheellinen argumentti "
+"tai\n"
+"    hakemiston vaihtaminen epäonnistuu."
+
+#: builtins.c:1855
+#, fuzzy
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Poistaa hakemistoja pinosta.\n"
+"    \n"
+"    Poistaa alkioita hakemistopinosta. Ilman argumentteja poistaa\n"
+"    pinon päällimmäisen, ja siirtyy uuteen ylimpään hakemistoon.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -n\tJättää normaalin hakemistoon siirtymisen suorittamatta,\n"
+"      \t\tjoten vain pinoa muokataan.\n"
+"      +N\tPoistaa N:nnen alkion (laskien vasemmalta �dirs�-komennon\n"
+"      \t\ttuottamasta listasta, alkaen nollasta). Esimerkiksi �popd +0�\n"
+"    \t\tpoistaa ensimmäisen hakemiston, �popd +1� toisen.\n"
+"      -N\tPoistaa N:nnen alkion (laskien oikealta �dirs�-komennon\n"
+"        \ttuottamasta listasta, alkaen nollasta). Esimerkiksi �popd -0�\n"
+"        \tpoistaa viimeisen hakemiston, �popd -1� toiseksi viimeisen.\n"
+"\n"
+"    Sisäänrakennettu �dirs�-komento listaa hakemistopinon.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen paitsi jos on annettu virheellinen argumentti tai\n"
+"    hakemiston vaihto epäonnistuu."
+
+#: builtins.c:1885
+#, fuzzy
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Näyttää hakemistopinon.\n"
+"    \n"
+"    Näyttää listan tällä hetkellä muistetuista hakemistoista. Hakemistot\n"
+"    päätyvät listalle �pushd�-komennolla; voit selata pinoa �popd�-\n"
+"    komennolla.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -c\tTyhjennä hakemistopino poistamalla kaikki alkiot\n"
+"      -l\tälä tulosta tilde-alkuisia versioita kotihakemistoon \n"
+"        \tsuhteutetuista hakemistoista\n"
+"      -p\ttulosta hakemistopuu hakemisto per rivi\n"
+"      -v\ttulosta hakemistopuu, hakemisto per rivi, numeroituina \n"
+"        \tpinoindeksin mukaan\n"
+"    \n"
+"    Argumentit:\n"
+"      +N\tNäyttää N:nnen alkion (�dirs�-komennon tuottamasta listasta\n"
+"        \tvasemmalta laskien) alkaen nollasta käynnistettäessä ilman\n"
+"        \toptioita.\n"
+"      -N\tNäyttää N:nnen alkion (�dirs�-komennon tuottamasta listasta\n"
+"        \toikealta laskien) alkaen nollasta käynnistettäessä ilman\n"
+"        \toptioita.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen paitsi jos on annettu virheellinen valitsin\n"
+"    tai tapahtuu virhe."
+
+#: builtins.c:1916
+#, fuzzy
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"Asettaa ja poistaa komentotulkin valitsimia.\n"
+"    \n"
+"    Muuttaa kunkin tulkin VALITSIMEN asetuksen. Ilman argumentteja\n"
+"    listaa kaikki tulkin valitsimet ja tiedon, onko valitsin voimassa \n"
+"    vai ei.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -o\trajaa VALITSIMET niihin, jotka on määritelty käytettäväksi\n"
+"        \t�set -o�:lla\n"
+"      -p\ttulosta kukin tulkin valitsin ja sen tila\n"
+"      -q\tälä tulosta\n"
+"      -s\taseta kukin VALITSIN\n"
+"      -u\tpoista kukin VALITSIN\n"
+"      \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen, mikäli VALITSIN on käytössä, epäonnistuu jos on\n"
+"    annettu virheellinen VALITSIN tai VALITSIN ei ole käytössä."
+
+#: builtins.c:1937
+#, fuzzy
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"Muotoilee ja tulostaa ARGUMENTIT MUOTOILULLA muotoiltuna.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -v muuttuja\tsijoita tuloste muuttujaan MUUTTUJA, älä tulosta\n"
+"    \n"
+"    MUOTOILU on merkkijono, joka koostuu kolmentyyppisistä alkioista:\n"
+"    tavallisista merkeistä, jotka vain kopioidaan vakiotulosteeseen;\n"
+"    escape-yhdistelmistä, jotka muunnetaan ja kopioidaan vakiotulosteeseen; "
+"ja\n"
+"    muotoilumäärityksistä, joista jokainen aiheuttaa seuraavan vuorossa\n"
+"    olevan argumentin tulostamisen.\n"
+"\n"
+"    Printf(1):n ja printf(3):n vakiomuotoilujen lisäksi printf tulkitsee:\n"
+"      %b\tlavenna escape-yhdistelmät vastaavassa argumentissa\n"
+"      %q\tkapseloi argumentti siten, että se voidaan käyttää tulkin\n"
+"        \tsyötteenä\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen paitsi jos on annettu virheellinen valitsin tai\n"
+"    tapahtuu kirjoitus- tai sijoitusvirhe."
+
+#: builtins.c:1971
+#, fuzzy
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Määrittelee miten readline täydentää argumentit.\n"
+"    \n"
+"    Määrittelee, miten kukin NIMI täydennetään. Ilman valitsimia "
+"tulostetaan\n"
+"    nykyiset täydennysmääritykset siten, että niitä voidaan käyttää \n"
+"    syötteenä.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -p\ttulostaa olemassa olevat täydennysmääritykset \n"
+"                hyödynnettävässä muodossa\n"
+"      -r\tpoista täydennysmääritys kultakin NIMELTÄ, tai, jos NIMIÄ ei\n"
+"        \tole annettu, kaikki täydennysmääritykset\n"
+"    \n"
+"    Täydennystä yritettäessä toimenpiteen suoritetaan samassa "
+"järjestyksessä\n"
+"    missä isoilla kirjoitetut valitsimet on edellä listattu.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen paitsi jos on annettu virheellinen valitsin tai \n"
+"    tapahtuu virhe."
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Näyttää mahdolliset täydenteet valitsimista riippuen.\n"
+"    \n"
+"    Tarkoitettu käytettäväksi komentotulkin funktiossa, joka luo "
+"mahdollisia\n"
+"    täydenteitä. Jos valinnainen argumentti SANA on annettu, luodaan siihen\n"
+"    sopivat täydenteet.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen paitsi jos on annettu virheellinen valitsin tai\n"
+"    tapahtuu virhe."
+
+#: builtins.c:2016
+#, fuzzy
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"Muuttaa tai näyttää täydennysvalitsimet.\n"
+"    \n"
+"    Muuttaa kunkin NIMEN, tai jos NIMIÄ ei ole annettu, tämänhetkisen\n"
+"    täydennyksen täydennysvalitsimia. Jos VALITSIMIA ei ole annettu, \n"
+"    tulostaa kunkin NIMEN tai tämänhetkisen täydennyksen \n"
+"    täydennysvalitsimet.\n"
+"    \n"
+"    Valitsimet:\n"
+"    \t-o valitsin\taseta täydennysvalitsin VALITSIN kullekin NIMELLE\n"
+"    \n"
+"    Käyttämällä �+o�:ta �-o�:n sijaan kyseinen valitsin poistetaan.\n"
+"    \n"
+"    Argumentit:\n"
+"    \n"
+"    Kukin NIMI viittaa komentoon jolle täydennysmääritys on ollut pakko\n"
+"    määritellä aiemmin käyttämällä sisäänrakennettua komentoa �complete�.\n"
+"    Jos NIMIÄ ei ole annettu, compoptia pitää kutsua tällä hetkellä\n"
+"    täydennyksiä tuottavasta funktiosta, ja sen valitsimia muutetaan.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen paitsi jos on annettu virheellinen valitsin tai\n"
+"    NIMELLE ei ole määritetty täydennysmääritystä."
+
+#: builtins.c:2047
+#, fuzzy
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"Lukee rivejä vakiosyötteestä taulukkomuuttujaan.\n"
+"    \n"
+"    Lukee rivejä vakiosyötteestä taulukkomuuttujaan TAULUKKO, tai \n"
+"    tiedostokahvasta TK jos käytetään -u -valitsinta. Muuttuja MAPFILE\n"
+"    on oletus-TAULUKKO.\n"
+"    \n"
+"    Valitsimet:\n"
+"      -n laskuri\tKopioi korkeintaan LASKURI riviä. Jos LASKURI on 0,\n"
+"        \t\tkaikki rivit kopioidaan.\n"
+"      -O alku\t\tAloita sijoitus indeksistä ALKU. Oletusindeksi on 0.\n"
+"      -s laskuri\tHylkää LASKURI ensimmäistä luettua riviä.\n"
+"      -t\t\tPoista rivinloppumerkki jokaisesta luetusta rivistä.\n"
+"      -u TK\t\tLue rivit tiedostokahvasta TK.\n"
+"      -C paluukutsu\tSuorita PALUUKUTSU aina, kun MÄÄRÄ riviä on luettu.\n"
+"      -c määrä\t\tMäärittele, montako riviä luetaan ennen kutakin \n"
+"        \t\tPALUUKUTSUA.\n"
+"    \n"
+"    Argumentit:\n"
+"      TAULUKKO\t\tTaulukkomuuttuja, johon tiedot luetaan.\n"
+"\n"
+"    Jos -C on annettu ilman -c:tä, oletusmäärä on 5000. Kun PALUUKUTSUA\n"
+"    evaluoidaan, sille annetaan indeksi seuraavaan sijoituspaikkaan\n"
+"    ylimääräisenä argumenttina.\n"
+"    \n"
+"    Jos ALKUA ei ole annettu, mapfile tyhjentää TAULUKON ennen siihen\n"
+"    sijoittamista.\n"
+"    \n"
+"    Paluuarvo:\n"
+"    Palauttaa onnistuneen paitsi jos on annettu virheellinen valitsin\n"
+"    tai TAULUKKO on kirjoitussuojattu."
+
+# Changed " characters into �...
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Lukee rivit tiedostosta taulukkomuuttujaan.\n"
+"    \n"
+"    �mapfile�:n synonyymi."
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "Palauttaa nykyisen alirutiinikutsun kontekstin.\n"
+#~ "    \n"
+#~ "    Ilman LAUSEKETTA palauttaa"
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process: prosessi %5ld (%s) putkijonossa"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "Tuntematon signaali #"
+
+#~ msgid "xrealloc: cannot reallocate %lu bytes (%lu bytes allocated)"
+#~ msgstr "xrealloc: ei voida uudelleenvarata %lu tavua (varattiin %lu tavua)"
+
+#~ msgid "xrealloc: cannot allocate %lu bytes"
+#~ msgstr "xrealloc: ei voida varata %lu tavua"
+
+#~ msgid "xrealloc: %s:%d: cannot reallocate %lu bytes (%lu bytes allocated)"
+#~ msgstr ""
+#~ "xrealloc: %s:%d: ei voida uudelleenvarata %lu tavua (varattiin %lu tavua)"
+
+#~ msgid ":"
+#~ msgstr ":"
+
+#~ msgid "true"
+#~ msgstr "true"
+
+#~ msgid "false"
+#~ msgstr "false"
+
+#~ msgid "times"
+#~ msgstr "times"
diff --git a/po/fr.gmo b/po/fr.gmo
new file mode 100644
index 0000000..2e08b78
--- /dev/null
+++ b/po/fr.gmo
diff --git a/po/fr.po b/po/fr.po
new file mode 100644
index 0000000..a386f6e
--- /dev/null
+++ b/po/fr.po
@@ -0,0 +1,7087 @@
+# Messages français pour GNU concernant bash.
+# Copyright (C) 2019 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+# Michel Robitaille <robitail@IRO.UMontreal.CA>, 2004
+# Christophe Combelles <ccomb@free.fr>, 2008, 2009, 2010, 2011
+# Frédéric Marchal <fmarchal@perso.be>, 2019
+msgid ""
+msgstr ""
+"Project-Id-Version: bash-5.0\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2019-01-10 20:44+0100\n"
+"Last-Translator: Frédéric Marchal <fmarchal@perso.be>\n"
+"Language-Team: French <traduc@traduc.org>\n"
+"Language: fr\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=2; plural=(n >= 2);\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "mauvais indice de tableau"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr "%s: retire l'attribut nameref"
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s : impossible de convertir un tableau indexé en associatif"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s : clé non valable pour le tableau associatif"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s : impossible d'assigner à un index non numérique"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr ""
+"%s : %s : l'assignation d'un tableau associatif doit se faire avec un indice"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s : impossible de créer : %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr ""
+"bash_execute_unix_command : impossible de trouver le mappage clavier pour la "
+"commande"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s : le premier caractère non vide n'est pas « \" »"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "pas de « %c » de fermeture dans %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s : virgule de séparation manquante"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "« %s » : impossible à délier"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr "expansion des accolades : impossible d'allouer la mémoire pour %s"
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr ""
+"expansion des accolades : échec lors de l'allocation mémoire pour %u éléments"
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr "expansion des accolades : échec de l'allocation mémoire pour « %s »"
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "« %s » : nom d'alias non valable"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "édition de ligne non activée"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "« %s » : nom du mappage clavier invalide"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s : impossible de lire : %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "« %s » : nom de fonction inconnu"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s n'est lié à aucune touche.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s peut être appelé via "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "« %s » : impossible à délier"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "nombre de boucles"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "ceci n'a un sens que dans une boucle « for », « while » ou « until »"
+
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Renvoie le contexte de l'appel de sous-routine actuel.\n"
+"    \n"
+"    Sans EXPR, renvoie « $ligne $nomfichier ».  Avec EXPR,\n"
+"    renvoie « $ligne $sousroutine $nomfichier »; ces informations "
+"supplémentaires\n"
+"    peuvent être utilisées pour fournir une trace de la pile.\n"
+"    \n"
+"    La valeur de EXPR indique le nombre de cadres d'appels duquel il faut "
+"revenir en arrière\n"
+"    avant le cadre actuel ; le cadre supérieur est le cadre 0.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie 0 à moins que le shell ne soit pas en train d'exécuter une "
+"fonction ou que EXPR\n"
+"    ne soit pas valable."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "« HOME » non défini"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "trop d'arguments"
+
+#: builtins/cd.def:342
+msgid "null directory"
+msgstr "répertoire nul"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "« OLDPWD » non défini"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "ligne %d : "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "avertissement :"
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s : utilisation :"
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s : l'option nécessite un argument"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s : argument numérique nécessaire"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s : non trouvé"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s : option non valable"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s : nom d'option non valable"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "« %s » : identifiant non valable"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "nombre octal non valable"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "nombre hexadécimal non valable"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "nombre non valable"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s : indication de signal non valable"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr ""
+"« %s » : ce n'est pas un n° de processus ou une spécification de tâche "
+"valable"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s : variable en lecture seule"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s : %s hors plage"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "argument"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s hors plage"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s : tâche inexistante"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s : pas de contrôle de tâche"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "pas de contrôle de tâche"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s : restreint"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "restreint"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s : ceci n'est pas une primitive du shell"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "erreur d'écriture : %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "erreur lors de la définition de l'attribut du terminal : %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "erreur lors de la récupération de l'attribut du terminal : %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s : erreur de détermination du répertoire actuel : %s : %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s : spécification de tâche ambiguë"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr "l'aide n'est pas disponible dans cette version"
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s : « unset » impossible : %s est en lecture seule"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s : « unset » impossible"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s : nom d'action non valable"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s : pas d'indication de complètement"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr ""
+"avertissement : l'option « -F » peut fonctionner différemment de ce à quoi "
+"vous vous attendez"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr ""
+"avertissement : l'option « -C » peut fonctionner différemment de ce à quoi "
+"vous vous attendez"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "fonction de complétion actuellement non en cours d'exécution"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "utilisable seulement dans une fonction"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr "%s : la variable de référence ne peut pas être un tableau"
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr "%s : références bouclées sur la même variable interdites"
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s : référence de nom circulaire"
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "« %s » : nom de variable invalide pour une référence de nom"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "« -f » ne peut pas être utilisé pour fabriquer des fonctions"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s : fonction en lecture seule"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr ""
+"%s : l'assignation d'un tableau composé entre apostrophes est dépréciée"
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s : impossible de détruire des variables tableaux de cette façon"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s : impossible de convertir un tableau indexé en tableau associatif"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "chargement dynamique non disponible"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "impossible d'ouvrir l'objet partagé %s : %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "impossible de trouver %s dans l'objet partagé %s : %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s : non chargé dynamiquement"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr "la fonction de chargement de %s retourne un échec (%d) : pas chargé"
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s : non chargé dynamiquement"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s : impossible d'effacer : %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s : ceci est un répertoire"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s : ceci n'est pas un fichier régulier"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s : le fichier est trop grand"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s : ne peut exécuter le fichier binaire"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s : impossible d'exécuter : %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "déconnexion\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "ce n'est pas un shell de connexion : utilisez « exit »"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Il y a des tâches stoppées.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Il y a des tâches en cours d'exécution.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "aucune commande trouvée"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "indication d'historique"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s : impossible d'ouvrir le fichier temporaire : %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "courant"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "tâche %d démarrée sans contrôle de tâche"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s : option non permise -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s : l'option nécessite un argument -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "hachage désactivé"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s : table de hachage vide\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "occurrences\tcommande\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Commandes du shell correspondant au mot-clé « "
+msgstr[1] "Commandes du shell correspondant aux mots-clés « "
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"Aucune rubrique d'aide ne correspond à « %s ». Essayez « help help », « man -"
+"k %s » ou « info %s »."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s : impossible d'ouvrir : %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Ces commandes de shell sont définies de manière interne. Saisissez « help » "
+"pour voir cette liste.\n"
+"Tapez « help nom » pour en savoir plus sur la fonction qui s'appelle « nom "
+"».\n"
+"Utilisez « info bash » pour en savoir plus sur le shell en général.\n"
+"Utilisez « man -k » ou « info » pour en savoir plus sur les commandes qui\n"
+"ne font pas partie de cette liste.\n"
+"\n"
+"Une astérisque (*) à côté d'un nom signifie que la commande est désactivée.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "impossible d'utiliser plus d'une option parmi « -anrw »"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "position dans l'historique"
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s : horodatage non valable"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s : l'expansion de l'historique a échoué"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s : « inlib » a échoué"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "pas d'autre option permise avec « -x »"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr ""
+"%s : les arguments doivent être des identifiants de tâche ou de processus"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Erreur inconnue"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "une expression est attendue"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s : n'est pas un tableau indexé"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s : spécification de descripteur de fichier non valable"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d : descripteur de fichier non valable : %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s : nombre de lignes non valable"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s : origine de tableau non valable"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s : quantum de callback non valable"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "nom de variable tableau vide"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "nécessité de prise en charge des variables tableaux"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "« %s » : caractère de format manquant"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "« %c » : spécification de format d'heure incorrecte"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "« %c » : caractère de format non permis"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "avertissement : %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "problème d'analyse du format : %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "chiffre hexadécimal manquant pour \\x"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "chiffre unicode manquant pour \\%c"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "pas d'autre répertoire"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s : argument non valable"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<aucun répertoire courant>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "pile de répertoire vide"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "indice de pile de répertoire"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Affiche la liste des répertoires actuellement mémorisés. Les répertoires\n"
+"   sont insérés dans la liste avec la commande « pushd ». Vous pouvez "
+"remonter\n"
+"   dans la liste en enlevant des éléments avec la commande « popd ».\n"
+"    \n"
+"     Options :\n"
+"      -c\tefface la pile des répertoires en enlevant tous les éléments.\n"
+"      -l\tn'affiche pas les versions raccourcies (avec ~) des répertoires\n"
+"    \trelativement à votre répertoire personnel\n"
+"      -p\taffiche la pile des répertoires avec un élément par ligne\n"
+"      -v\taffiche la pile des répertoires avec un élément par ligne préfixé\n"
+"    \tavec la position dans la pile\n"
+"    \n"
+"    Arguments :\n"
+"    +N\tAffiche le Nième élément en comptant de zéro depuis la gauche de la\n"
+"    liste affichée par « dirs » lorsque celle-ci est appelée sans option.\n"
+"    \n"
+"    -N\tAffiche le Nième élément en comptant de zéro depuis la droite de la\n"
+"    liste affichée par « dirs » lorsque celle-ci est appelée sans option."
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Ajoute un répertoire en haut de la pile des répertoires, ou permute\n"
+"    la pile de façon que le répertoire en haut de la pile devienne\n"
+"    le nouveau répertoire de travail. S'il n'y a pas d'argument, les deux\n"
+"    répertoires en haut de la pile sont échangés.\n"
+"    \n"
+"    Options :\n"
+"    -n\tNe change pas de répertoire de travail lorsque des répertoires\n"
+"    \tsont ajoutés à la pile, de façon que seule la pile soit manipulée\n"
+"    \n"
+"    Arguments :\n"
+"    +N\tPermute la pile de façon que le Nième répertoire se place en haut,\n"
+"    \ten comptant de zéro depuis la gauche de la liste fournie par « dirs "
+"».\n"
+"    \n"
+"    -N\tPermute la pile de façon que le Nième répertoire se place en haut,\n"
+"    \ten comptant de zéro depuis la droite de la liste fournie par « dirs "
+"».\n"
+"    \n"
+"      dir\tAjoute le répertoire DIR en haut de la pile, et en fait le "
+"nouveau\n"
+"    \trépertoire de travail.\n"
+"    \n"
+"    Vous pouvez voir la pile des répertoires avec la commande « dirs »."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Enlève des éléments de la pile des répertoires. S'il n'y a pas\n"
+"    d'argument, le répertoire en haut de la pile est enlevé,\n"
+"    et le nouveau sommet de la pile devient le répertoire de travail.\n"
+"    \n"
+"    Options :\n"
+"    -n\tNe change pas de répertoire de travail lorsque des répertoires\n"
+"    \tsont enlevés de la pile, de façon que seule la pile soit manipulée.\n"
+"    \n"
+"    Arguments :\n"
+"    +N\tEnlève le Nième répertoire, en comptant de zéro depuis la gauche\n"
+"    \tde la liste fournie par « dirs ». Par exemple : « popd +0 »\n"
+"    \tenlève le premier répertoire, « popd +1 » le deuxième.\n"
+"    \n"
+"    -N\tEnlève le Nième répertoire, en comptant de zéro depuis la droite\n"
+"    \tde la liste fournie par « dirs ». Par exemple : « popd -0 »\n"
+"    \tenlève le dernier répertoire, « popd -1 » l'avant-dernier.\n"
+"    \n"
+"    Vous pouvez voir la pile des répertoires avec la commande « dirs »."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s : spécification de délai d'expiration non valable"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "erreur de lecture : %d : %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr ""
+"« return » n'est possible que depuis une fonction ou depuis un script "
+"exécuté par « source »"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr ""
+"« unset » ne peut pas s'appliquer simultanément à une fonction et à une "
+"variable"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s : n'est pas une variable tableau"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s : n'est pas une fonction"
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr "%s : impossible d'exporter"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "nombre de « shift »"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr ""
+"les options du shell ne peuvent pas être simultanément activées et "
+"désactivées"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s : nom d'option du shell non valable"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "nom de fichier nécessaire en argument"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s : fichier introuvable"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "suspension impossible"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "un shell de connexion ne peut pas être suspendu"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s est un alias vers « %s »\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s est un mot-clé du shell\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s est une fonction\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s est une primitive spéciale du shell\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s est une primitive du shell\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s est %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s est haché (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s : argument de limite non valable"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "« %c » : mauvaise commande"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s : impossible d'obtenir la limite : %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "limite"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s : impossible de modifier la limite : %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "nombre octal"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "« %c » : opérateur de mode symbolique non valable"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "« %c » : caractère de mode symbolique non valable"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " ligne "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "dernière commande : %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Annulation…"
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr "INFORM: "
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "erreur de commande inconnue"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "mauvais type de commande"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "mauvais connecteur"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "mauvais saut"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s : variable sans liaison"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\aattente de données expirée : déconnexion automatique\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "l'entrée standard ne peut pas être redirigée depuis /dev/null : %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "TIMEFORMAT : « %c » : caractère de format non valable"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr "execute_coproc: coproc [%d:%s] existe encore"
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "erreur de tube"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr ""
+"eval : dépassement de la profondeur maximum d'imbrication d'évaluations (%d)"
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr ""
+"%s : dépassement de la profondeur maximum d'imbrication de sources (%d)"
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr ""
+"%s : dépassement de la profondeur maximum d'imbrication de fonctions (%d)"
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr ""
+"%s : restriction : « / » ne peut pas être spécifié dans un nom de commande"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s : commande introuvable"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s : %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s : %s : mauvais interpréteur"
+
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s : impossible d'exécuter le fichier binaire : %s"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "« %s » : est une primitive spéciale"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "impossible de dupliquer le fd %d vers le fd %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "dépassement du niveau de récursivité dans l'expression"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "débordement négatif de la pile de récursivité"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "erreur de syntaxe dans l'expression"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "tentative d'affectation à une non-variable"
+
+#: expr.c:530
+msgid "syntax error in variable assignment"
+msgstr "erreur de syntaxe dans l'affectation d'une variable"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "division par 0"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "bogue : mauvais symbole pour expassign"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "« : » attendu pour une expression conditionnelle"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "exposant négatif"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "identifiant attendu après un pré-incrément ou un pré-décrément"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "« ) » manquante"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "erreur de syntaxe : opérande attendu"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "erreur de syntaxe : opérateur arithmétique non valable"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s : %s (le symbole erroné est « %s »)"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "base arithmétique non valable"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s : nombre de lignes non valable"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "valeur trop grande pour la base"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s : erreur d'expression\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd : ne peut accéder aux répertoires parents"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "impossible de réinitialiser le mode « nodelay » pour le fd %d"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr ""
+"impossible d'allouer un nouveau descripteur de fichier pour l'entrée de bash "
+"depuis le fd %d"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input : le tampon existe déjà pour le nouveau fd %d"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline : pgrp pipe"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "le processus cloné n°%d apparaît dans la tâche en fonctionnement %d"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "suppression de la tâche stoppée %d avec le groupe de processus %ld"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process : pid %5ld (%s) signalé toujours en vie"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid : %ld : n° de processus inexistant"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Signal %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Fini"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Stoppé"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Stoppé(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "En cours d'exécution"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Fini(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Termine %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "État inconnu"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(core dumped)"
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (wd : %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "fils setpgid (%ld à %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait : le processus n°%ld n'est pas un fils de ce shell"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for : Aucun enregistrement du processus n°%ld"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job : la tâche %d est stoppée"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s : tâche inexistante"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s : la tâche s'est terminée"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s : la tâche %d est déjà en arrière plan"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr "waitchld : activation de WNOHANG pour éviter un blocage définitif"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s : ligne %d : "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (core dumped)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(maintenant, wd : %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control : getpgrp a échoué"
+
+#: jobs.c:4447
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control : pas de contrôle de tâche en tâche de fond"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control : discipline de ligne"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control : setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "impossible de régler le groupe de processus du terminal (%d)"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "pas de contrôle de tâche dans ce shell"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc : échec de l'assertion : %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc : %s:%d : assertion manquée\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "inconnu"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc : bloc écrasé sur liste libre"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free : appelé avec un bloc déjà libéré comme argument"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free : appelé avec un bloc non alloué comme argument"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free : débordement négatif détecté ; « mh_nbytes » est hors plage"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free : débordement négatif détecté ; « mh_nbytes » est hors plage"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free : les tailles de fragment au début et à la fin sont différentes"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc : appelé avec un bloc non alloué comme argument"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc : débordement négatif détecté ; « mh_nbytes » est hors plage"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc : débordement négatif détecté ; « mh_nbytes » est hors plage"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr ""
+"realloc : les tailles de fragment au début et à la fin sont différentes"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc : la table d'allocation est pleine avec FIND_ALLOC ?\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc : %p déjà alloué selon la table ?\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free : %p déjà libre selon la table ?\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "base non valable"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s : hôte inconnu"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: service non valable"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s : mauvaise spécification de chemin réseau"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "opérations sur le réseau non prises en charge"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale : LC_ALL : impossible de changer le paramètre de langue (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr ""
+"setlocale : LC_ALL :  impossible de changer le paramètre de langue (%s) : %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale : %s : impossible de changer le paramètre de langue (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr ""
+"setlocale : %s : impossible de changer le paramètre de langue (%s) : %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "Vous avez du courrier dans $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "Vous avez du nouveau courrier dans $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "Le courrier dans %s a été lu\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "erreur de syntaxe : expression arithmétique nécessaire"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "erreur de syntaxe : « ; » non attendu"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "erreur de syntaxe : « ((%s)) »"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document : le type d'instruction %d est incorrect"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr ""
+"« here-document » à la ligne %d délimité par la fin du fichier (au lieu de « "
+"%s »)"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr "make_redirection : l'instruction de redirection « %d » est hors plage"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+"shell_getc: shell_input_line_size (%zu) dépasse SIZE_MAX (%lu): ligne "
+"tronquée"
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr "nombre maximum de documents en ligne (« here-document ») dépassé"
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr ""
+"fin de fichier (EOF) prématurée lors de la recherche du « %c » correspondant"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "fin de fichier (EOF) prématurée lors de la recherche de « ]] »"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr ""
+"erreur de syntaxe dans une expression conditionnelle : symbole « %s » "
+"inattendu"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "erreur de syntaxe dans une expression conditionnelle"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "symbole inattendu « %s » au lieu de « ) »"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "« ) » attendu"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "argument inattendu « %s » pour l'opérateur conditionnel à un argument"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "argument inattendu pour l'opérateur conditionnel à un argument"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "symbole « %s » trouvé à la place d'un opérateur binaire conditionnel"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "opérateur binaire conditionnel attendu"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "argument « %s » inattendu pour l'opérateur binaire conditionnel"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "argument inattendu pour l'opérateur binaire conditionnel"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "symbole « %c » inattendu dans la commande conditionnelle"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "symbole « %s » inattendu dans la commande conditionnelle"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "symbole « %d » inattendu dans la commande conditionnelle"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "erreur de syntaxe près du symbole inattendu « %s »"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "erreur de syntaxe près de « %s »"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "erreur de syntaxe : fin de fichier prématurée"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "erreur de syntaxe"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Utilisez « %s » pour quitter le shell.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr ""
+"fin de fichier (EOF) prématurée lors de la recherche d'une « ) » "
+"correspondante"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "complètement : fonction « %s » non trouvée"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr "programmable_completion: %s: boucle de ré-essai possible"
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert : %s : NULL COMPSPEC"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command : mauvais connecteur « %d »"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set : %d : descripteur de fichier non valable"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set : pointeur de fichier NULL"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != fileno xtrace fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf : « %c » : caractère de format invalide"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "descripteur de fichier hors plage"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s : redirection ambiguë"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s : impossible d'écraser le fichier existant"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s : restreint : impossible de rediriger la sortie"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr ""
+"impossible de créer un fichier temporaire pour le « here-document » : %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s : impossible d'affecter le descripteur de fichier à la variable"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "/dev/(tcp|udp)/host/port non pris en charge sans réseau"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr ""
+"erreur de redirection : impossible de dupliquer le descripteur de fichier"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "« /tmp » introuvable, veuillez le créer !"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "« /tmp » doit être un nom de répertoire valable"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr "le mode d'affichage amélioré est ignoré dans les shells interactifs"
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c : option non valable"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "impossible de changer le uid en %d : uid effectif %d"
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "impossible de changer le gid en %d: gid effectif %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr "impossible de démarrer le débogueur: mode déboguage désactivé"
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr "%s : Ceci est un répertoire"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "Je n'ai pas de nom !"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, version %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Utilisation :\t%s [option longue GNU] [option] ...\n"
+"\t%s [option longue GNU] [option] fichier-script ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "Options longues GNU :\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Options du shell :\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-ilrsD ou -c commande ou -O shopt_option\t\t(invocation seulement)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s ou -o option\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+"Pour en savoir plus sur les options du shell, saisissez « %s -c \"help set\" "
+"».\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr ""
+"Pour en savoir plus sur les primitives du shell, saisissez « %s -c help ».\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "Utilisez la commande « bashbug » pour faire un rapport de bogue.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr "page d'accueil de bash : <http://www.gnu.org/software/bash>\n"
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr ""
+"Aide générale sur l'utilisation de logiciels GNU : <http://www.gnu.org/"
+"gethelp/>\n"
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask : %d : opération non valable"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Signal falsifié"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Raccroche"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Interrompt"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Quitte"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Instruction incorrecte"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "trace/trap BPT"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "Instruction ABORT"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "Instruction EMT"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Exception en virgule flottante"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Tué"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Erreur de bus"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Erreur de segmentation"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Mauvais appel système"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Tube brisé"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Horloge d'alarme"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Terminé"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Condition d'E/S urgente"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Stoppé (signal)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Continue"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Mort ou arrêt du fils"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Stoppé (entrée tty)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Stoppé (sortie tty)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "E/S prête"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "Limite CPU"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "Limite fichier"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Alarme (virtuelle)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Alarme (profile)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Fenêtre changée"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Verrou d'enregistrement"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Signal utilisateur 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Signal utilisateur 2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "données d'entrée HFT en attente"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "coupure d'alimentation imminente"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "panne système imminente"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "migration processus vers un autre CPU"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "erreur de programmation"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "Mode de surveillance HFT accordé"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "Mode de surveillance HFT rétracté"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "Séquence de son HFT terminée"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "Demande d'information"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "Signal n°%d inconnu"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "Mauvaise substitution : pas de « %s » de fermeture dans %s"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s : impossible d'affecter une liste à un élément de tableau"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "impossible de fabriquer un tube pour une substitution de processus"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "impossible de fabriquer un fils pour une substitution de processus"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "impossible d'ouvrir le tube nommé « %s » en lecture"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "impossible d'ouvrir le tube nommé « %s » en écriture"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "impossible de dupliquer le tube nommé « %s » vers le fd %d"
+
+#: subst.c:6213
+msgid "command substitution: ignored null byte in input"
+msgstr "substitution de commande: octet nul ignoré en entrée"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "impossible de fabriquer un tube pour une substitution de commande"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr ""
+"impossible de fabriquer un processus fils pour une substitution de commande"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute : impossible de dupliquer le tube vers le fd 1"
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s : nom de variable invalide pour une référence de nom"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s : expansion indirecte invalide"
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr "%s: nom de variable invalide"
+
+#: subst.c:7256
+#, c-format
+msgid "%s: parameter not set"
+msgstr "%s : paramètre non défini"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s : paramètre vide ou non défini"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s : expression de sous-chaîne négative"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s : mauvaise substitution"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s : affectation impossible de cette façon"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+"les versions futures du shell forceront l'évaluation comme une substitution "
+"arithmétique"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "mauvais remplacement : pas de « ` » de fermeture dans %s"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "pas de correspondance : %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "argument attendu"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s : nombre entier attendu comme expression"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "« ) » attendue"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "« ) » attendue au lieu de %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s : opérateur binaire attendu"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s : opérateur unaire attendu"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "« ] » manquant"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "erreur de syntaxe : « ; » non attendu"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "numéro de signal non valable"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr ""
+"gestionnaire trap : dépassement de la profondeur maximum du gestionnaire "
+"« trap » (%d)"
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps : mauvaise valeur dans trap_list[%d] : %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps : le gestionnaire de signal est SIG_DFL, renvoi de %d (%s) "
+"à moi-même"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler : mauvais signal %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "erreur lors de l'importation de la définition de fonction pour « %s »"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "niveau de shell trop élevé (%d), initialisation à 1"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr ""
+"make_local_variable : aucun contexte de fonction dans le champ d'application "
+"actuel"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s : la variable ne peut se voir assigner une valeur"
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr "%s : assigne un entier à la référence de nom"
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr ""
+"all_local_variables : aucun contexte de fonction dans le champ d'application "
+"actuel"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s a un « exportstr » nul"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "caractère %d non valable dans « exportstr » pour %s"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "pas de « = » dans « exportstr » pour %s"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr ""
+"pop_var_context : le début de « shell_variables » n'est pas un contexte de "
+"fonction"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context : aucun contexte à « global_variables »"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr ""
+"pop_scope : le début de « shell_variables » n'est pas un champ d'application "
+"temporaire d'environnement"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s : %s : impossible d'ouvrir comme FILE"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s : %s : valeur non valable pour un descripteur de fichier de trace"
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s : %s : valeur de compatibilité hors plage"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Copyright (C) 2012 Free Software Foundation, Inc."
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"Licence GPLv3+ : GNU GPL version 3 ou ultérieure <http://gnu.org/licenses/"
+"gpl.html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, version %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr ""
+"Ceci est un logiciel libre ; vous être libre de le modifier et de le "
+"redistribuer."
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "AUCUNE GARANTIE n'est fournie, dans les limites permises par la loi."
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s : impossible d'allouer %lu octets (%lu octets alloués)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s : impossible d'allouer %lu octets"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s : %s:%d : impossible d'allouer %lu octets (%lu octets alloués)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s : %s:%d : impossible d'allouer %lu octets"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [nom[=valeur] ... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] nom [nom ...]"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpvsPSVX] [-m keymap] [-f nomfichier] [-q nom] [-u nom] [-r "
+"seqtouche] [-x seqtouche:commande-shell] [seqtouche:fonction-readline ou "
+"commande-readline]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [shell-builtin [arg ...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [expr]"
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]] [-@]] [rép]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] commande [arg ...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilnrtux] [-p] [nom[=valeur] ...]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilnrtux] [-p] nom[=valeur] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [option] nom[=valeur] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [arg ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [arg ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f nomfichier] [nom ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [arg ...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts chaineopts nom [arg]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a nom] [commande [arguments ...]] [redirection ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr ""
+"fc [-e ename] [-lnr] [premier] [dernier] ou fc -s [motif=nouveau] [commande]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [job_spec]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [job_spec ...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p nomchemin] [-dt] [nom ...]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [motif ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d décalage] [n] ou history -anrw [nomfichier] ou history -ps "
+"arg [arg...]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [jobspec ...] ou jobs -x commande [args]"
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [jobspec ... | pid ...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... ou kill -l "
+"[sigspec]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let arg [arg ...]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a tableau] [-d delim] [-i texte] [-n ncars] [-N ncars] [-p "
+"prompt] [-t timeout] [-u fd] [nom ...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o nom-option] [--] [arg ...]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [nom ...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [nom[=valeur] ...] ou export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [nom[=valeur] ...] ou readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source nom_fichier [arguments]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". nom_fichier [arguments]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [expr]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ arg... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[arg] signal_spec ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] nom [nom ...]"
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [limite]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [mode]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-fn] [id ...]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [pid ...]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for NOM [in MOTS ... ] ; do COMMANDES; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( exp1; exp2; exp3 )); do COMMANDES; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select NOM [in MOTS ... ;] do COMMANDES; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] pipeline"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case MOT in [MOTIF [| MOTIF]...) COMMANDES ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if COMMANDES; then COMMANDES; [ elif COMMANDES; then COMMANDES; ]... [ else "
+"COMMANDES; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while COMMANDES; do COMMANDES; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until COMMANDES; do COMMANDES; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [NOM] commande [redirections]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function nom { COMMANDES ; } ou nom () { COMMANDES ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ COMMANDES ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "job_spec [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( expression ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ expression ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "variables - Noms et significations de certaines variables du shell"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | rép]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [nom_opt ...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v var] format [arguments]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G "
+"motif_glob] [-W liste_mots]  [-F fonction] [-C commande] [-X motif_filtre] [-"
+"P prefixe] [-S suffixe] [nom ...]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G motif_glob] [-W "
+"liste_mots]  [-F fonction] [-C commande] [-X motif_filtre] [-P prefixe] [-S "
+"suffixe] [mot]"
+
+#: builtins.c:239
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o option] [-DEI] [nom ...]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-d délim] [-n nombre] [-O origine] [-s nombre] [-t] [-u fd] [-C "
+"callback] [-c quantum] [tableau]"
+
+#: builtins.c:244
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-d delim] [-n nombre] [-O origine] [-s nombre] [-t] [-u fd] [-C "
+"callback] [-c quantum] [tableau]"
+
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Définit ou affiche des alias.\n"
+"    \n"
+"    Sans argument, « alias » affiche la liste des alias dans le format "
+"réutilisable\n"
+"    « alias NOM=VALEUR » sur la sortie standard.\n"
+"    \n"
+"    Sinon, un alias est défini pour chaque NOM dont la VALEUR est donnée.\n"
+"    Une espace à la fin de la VALEUR entraîne la vérification du mot suivant "
+"pour\n"
+"    déterminer si un alias doit être remplacé lorsque l'alias est "
+"développé.\n"
+"    \n"
+"    Options :\n"
+"      -p\tAffiche tous les alias actuels dans un format réutilisable\n"
+"    \n"
+"    Code de sortie :\n"
+"    « alias » renvoie la valeur vraie à moins que NOM ne soit fourni et que "
+"celui-ci n'aie\n"
+"    pas d'alias."
+
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Enlève chaque NOM de la liste des alias actuels.\n"
+"    \n"
+"    Options :\n"
+"      -a\tretire toutes les définitions d'alias\n"
+"    \n"
+"    Renvoie le code de succès à moins que NOM ne soit pas un alias existant."
+
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"Définit les associations de touches et les variables de « Readline ».\n"
+"    \n"
+"    Associe une séquence de touches à une fonction « Readline » ou une "
+"macro, ou définit une\n"
+"    variable « Readline ». La syntaxe des arguments non-options est "
+"équivalente à celle\n"
+"    du fichier ~/.inputrc, mais doivent être transmis comme arguments "
+"uniques :\n"
+"    ex : bind '\"\\C-x\\C-r\" : re-read-init-file'.\n"
+"    \n"
+"    Options :\n"
+"      -m  keymap         Utilise KEYMAP comme mappage clavier pendant la\n"
+"                         durée de cette commande. Des noms de mappage "
+"valables\n"
+"                         sont « emacs », « emacs-standard », « emacs-meta "
+"», \n"
+"                         « emacs-ctlx », « vi », « vi-move », « vi-command » "
+"et\n"
+"                         « vi-insert ».\n"
+"      -l                 Affiche les noms de fonctions.\n"
+"      -P                 Affiche les noms et associations des fonctions.\n"
+"      -p                 Affiche les fonctions et associations dans une "
+"forme qui\n"
+"                         peut être réutilisée comme entrée.\n"
+"      -S                 Affiche les séquences de touches qui invoquent des "
+"macros,\n"
+"                         et leurs valeurs.\n"
+"      -s                 Affiche les séquences de touches qui invoquent des "
+"macros,\n"
+"                         et leurs valeurs sous une forme qui peut être "
+"utilisée comme entrée.\n"
+"      -V                 Affiche les noms et valeurs des variables\n"
+"      -v                 Affiche les noms et valeurs des variables dans une "
+"forme qui peut\n"
+"                         être réutilisée comme entrée.\n"
+"      -q  nom-fonction   Permet de savoir quelles touches appellent la "
+"fonction.\n"
+"      -u  nom-fonction   Enlève toutes les associations de touches liée à la "
+"fonction.\n"
+"      -r  seqtouche      Enlève l'association pour « seqtouche ».\n"
+"      -f  nomfichier     Lit l'association de touches depuis NOMFICHIER.\n"
+"      -x  seqtouche:commande-shell\tEntraîne l'exécution de la commande-"
+"shell\n"
+"    \t\t\t\tlorsque « seqtouche » est entrée.\n"
+"      -X                 Liste les séquences de touches liées à -x et les "
+"commandes associées\n"
+"                         sous une forme qui peut être réutilisée comme "
+"entrée.\n"
+"    \n"
+"    Code de sortie :\n"
+"    « bind » renvoie 0 à moins qu'une option non reconnue ne soit donnée ou "
+"qu'une erreur survienne."
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Sort des boucles for, while, ou until.\n"
+"    \n"
+"    Sort d'une boucle FOR, WHILE ou UNTIL.  Si N est spécifié, sort de N "
+"boucles\n"
+"    imbriquées.\n"
+"    \n"
+"    Code de retour :\n"
+"    Le code de retour est 0 à moins que N ne soit pas supérieur ou égal à 1."
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Reprend l'exécution des boucles for, while ou until.\n"
+"    \n"
+"    Reprend l'itération suivante de la boucle FOR, WHILE ou UNTIL de niveau "
+"supérieur.\n"
+"    Si N est précisé, reprend à la N-ième boucle supérieure.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Le code de sortie est 0 à moins que N ne soit pas supérieur ou égale à 1."
+
+#: builtins.c:354
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Exécute des commandes shell intégrées.\n"
+"    \n"
+"    Exécute SHELL-BUILTIN avec les arguments ARGs sans effectuer de "
+"recherche\n"
+"    de commande.  Ceci est utile lorsque vous souhaitez remplacer une "
+"commande\n"
+"    intégrée par une fonction shell, mais nécessite d'exécuter la commande "
+"intégrée\n"
+"    dans la fonction.\n"
+"    \n"
+"    Code de retour :\n"
+"    Renvoie le code de retour de SHELL-BUILTIN, ou false si SHELL-BUILTIN "
+"n'est\n"
+"    pas une commande intégrée."
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Renvoie le contexte de l'appel de sous-routine actuel.\n"
+"    \n"
+"    Sans EXPR, renvoie « $ligne $nomfichier ».  Avec EXPR,\n"
+"    renvoie « $ligne $sousroutine $nomfichier »; ces informations "
+"supplémentaires\n"
+"    peuvent être utilisées pour fournir une trace de la pile.\n"
+"    \n"
+"    La valeur de EXPR indique le nombre de cadres d'appels duquel il faut "
+"revenir en arrière\n"
+"    avant le cadre actuel ; le cadre supérieur est le cadre 0.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie 0 à moins que le shell ne soit pas en train d'exécuter une "
+"fonction ou que EXPR\n"
+"    ne soit pas valable."
+
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"Change le répertoire de travail du shell.\n"
+"    \n"
+"    Change le répertoire actuel vers DIR.  Le répertoire DIR par défaut\n"
+"    est donné par la variable « HOME » du shell.\n"
+"    \n"
+"    La variable CDPATH définit le chemin de recherche du répertoire "
+"contenant\n"
+"    DIR. Les noms de répertoires alternatifs dans CDPATH sont séparés par un "
+"deux-point « : ».\n"
+"    Un nom de répertoire vide est identique au répertoire actuel.  Si DIR "
+"commence\n"
+"    avec une barre oblique « / », alors CDPATH n'est pas utilisé.\n"
+"    \n"
+"    Si le répertoire n'est pas trouvé et que l'option « cdable_vars » du "
+"shell est définie,\n"
+"    alors le mot est supposé être un nom de variable. Si la variable possède "
+"une valeur,\n"
+"    alors cette valeur est utilisée pour DIR.\n"
+"    \n"
+"    Options :\n"
+"      -L\tforce le suivi des liens symboliques : résout les liens "
+"symboliques dans\n"
+"    \t\tDIR après le traitement des instances de « .. »\n"
+"      -P\tutilise la structure physique des répertoires sans suivre les "
+"liens\n"
+"    \t\tsymboliques : résout les liens symboliques dans DIR avant le "
+"traitement des\n"
+"    \t\tinstances de « .. »\n"
+"      -e\tsi l'option -P est fournie et que le répertoire de travail actuel "
+"ne peut pas\n"
+"    \t\têtre déterminé avec succès, alors sort avec un code de retour non "
+"nul\n"
+"      -@  sur les systèmes qui le supporte, présente un fichier avec des "
+"attributs\n"
+"    \t\tétendus comme un répertoire contenant les attributs du fichier\n"
+"    \n"
+"    Le comportement par défaut est de suivre les liens symboliques, comme si "
+"« -L » était précisé.\n"
+"    « .. » est traité en retirant le composant immédiatement avant dans le "
+"chemin jusqu'à\n"
+"    la barre oblique ou le début de DIR.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie 0 si le répertoire est changé et si $PWD est correctement "
+"défini\n"
+"    quand -P est utilisé ; sinon autre chose que 0."
+
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"Affiche le nom du répertoire de travail courant.\n"
+"    \n"
+"    Options :\n"
+"      -L\taffiche la valeur de $PWD s'il nomme le répertoire de travail\n"
+"    \t\tcourant\n"
+"      -P\taffiche le répertoire physique, sans aucun lien symbolique\n"
+"    \n"
+"    Par défaut, « pwd » se comporte comme si « -L » était spécifié.\n"
+"    \n"
+"    Code de retour :\n"
+"    Renvoie 0 à moins qu'une option non valable ne soit donnée ou que le\n"
+"    répertoire courant ne peut pas être lu."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Commande vide.\n"
+"    \n"
+"    Sans effet : la commande ne fait rien.\n"
+"    \n"
+"    Code de retour :\n"
+"    Renvoie toujours le code de succès."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Renvoie un résultat de succès.\n"
+"    \n"
+"    Code de retour :\n"
+"    Succès."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Renvoie un résultat d'échec.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Toujours l'échec."
+
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Exécute une simple commande ou affiche des informations sur les commandes.\n"
+"    \n"
+"    Lance la COMMANDE avec des ARGS en court-circuitant la recherche de "
+"commande,\n"
+"    ou affiche des informations sur les COMMANDEs spécifiées.  Ceci peut "
+"être\n"
+"    utilisé pour invoquer des commandes sur le disque lorsqu'il y a conflit\n"
+"    avec une fonction portant le même nom.\n"
+"    \n"
+"    Options :\n"
+"      -p    utilise une valeur par défaut pour CHEMIN qui garantit de "
+"trouver\n"
+"            tous les utilitaires standards\n"
+"      -v    affiche une description de la COMMANDE similaire à la commande "
+"intégrée\n"
+"            « type »\n"
+"      -V    affiche une description plus détaillée de chaque COMMANDE\n"
+"    \n"
+"    Code de retour :\n"
+"    Renvoie le code de sortie de la COMMANDE, ou le code d'échec si la "
+"COMMANDE est introuvable."
+
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"Définit les valeurs et les attributs des variables.\n"
+"    \n"
+"    Déclare des variables et leur assigne des attributs.  Si aucun NOM n'est "
+"donné,\n"
+"    affiche les attributs et les valeurs de toutes les variables.\n"
+"    \n"
+"    Options :\n"
+"      -f\trestreint l'action ou l'affichage aux noms et définitions de "
+"fonctions\n"
+"      -F\trestreint l'affichage aux noms des fonctions uniquement (avec le "
+"numéro de ligne\n"
+"    \t\tet le fichier source lors du débogage)\n"
+"      -g\tcrée des variables globales lorsqu'utilisée dans une fonction "
+"shell ; ignoré sinon\n"
+"      -p\taffiche les attributs et la valeur de chaque NOM\n"
+"    \n"
+"    Options qui définissent des attributs :\n"
+"      -a\tpour faire de NOMs des tableaux indexés (si pris en charge)\n"
+"      -A\tpour faire de NOMs des tableaux associatifs (si pris en charge)\n"
+"      -i\tpour assigner l'attribut « integer » aux NOMs\n"
+"      -l\tpour convertir la valeur de chaque NOM en minuscules lors de "
+"l'affectation\n"
+"      -n\ttransforme NOM en une référence vers une variable nommée d'après "
+"sa valeur\n"
+"      -r\tpour mettre les NOMs en lecture seule\n"
+"      -t\tpour permettre aux NOMs d'avoir l'attribut « trace »\n"
+"      -u\tpour convertir les NOMs en majuscules lors de l'affectation\n"
+"      -x\tpour permettre aux NOMs de s'exporter\n"
+"    \n"
+"    Utiliser « + » au lieu de « - » pour désactiver l'attribut.\n"
+"    \n"
+"    Les variables avec l'attribut « integer » ont une évaluation "
+"arithmétique (voir\n"
+"    la commande « let ») effectuée lorsqu'une valeur est affectée à la "
+"variable.\n"
+"    \n"
+"    Lorsqu'utilisée dans une fonction, « declare » permet aux NOMs d'être "
+"locaux,\n"
+"    comme avec la commande « local ». L'option « -g » supprime ce "
+"comportement.\n"
+"    \n"
+"    Code de retour :\n"
+"    Renvoie le code de succès à moins qu'une option non valable soit fournie "
+"ou qu'une\n"
+"    erreur survienne lors de l'assignation d'une variable."
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"Définit des valeurs et des attributs de variables.\n"
+"    \n"
+"    Un synonyme de « déclare ».  Consultez « help declare »."
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Définit des variables locales.\n"
+"    \n"
+"    Crée une variable locale nommée NOM, avec une valeur VALEUR.  OPTION "
+"peut\n"
+"    être n'importe quelle option acceptée par « declare ».\n"
+"    \n"
+"    Les variables locales peuvent seulement être utilisées à l'intérieur "
+"d'une\n"
+"    fonction; elles ne sont visibles que dans les fonctions où elles ont "
+"été\n"
+"    définies et dans leurs fonctions filles.\n"
+"    \n"
+"    Code de retour :\n"
+"    Renvoie le code de succès à moins qu'une option non valable ne soit "
+"fournie,\n"
+"    qu'une erreur survienne lors de l'assignation d'une variable, ou que le "
+"shell\n"
+"    n'exécute pas une fonction."
+
+#: builtins.c:557
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Écrit les arguments sur la sortie standard.\n"
+"    \n"
+"    Affiche les ARGs, séparés par une espace, sur la sortie standard, "
+"suivis\n"
+"    d'un retour à la ligne.\n"
+"    \n"
+"    Options :\n"
+"      -n\tn'ajoute pas de saut de ligne\n"
+"      -e\tactive l'interprétation des barres contre-obliques d'échappement "
+"ci-dessous\n"
+"      -E\tsupprime explicitement l'interprétation des barres contre-obliques "
+"d'échappement\n"
+"    \n"
+"    « echo » interprète les caractères suivants comme des séquences "
+"d'échappement :\n"
+"      \\a\talerte (cloche)\n"
+"      \\b\tretour arrière\n"
+"      \\c\tsupprime la suite de la sortie\n"
+"      \\e\tcaractère échap.\n"
+"      \\E\tcaractère échap.\n"
+"      \\f\tsaut de page\n"
+"      \\n\tsaut de ligne\n"
+"      \\r\tretour chariot\n"
+"      \\t\ttabulation horizontale\n"
+"      \\v\ttabulation verticale\n"
+"      \\\\\tbarre contre-oblique\n"
+"      \\0nnn\tle caractère dont le code ASCII est NNN (en octal).  NNN peut "
+"être\n"
+"    \t\tlong de 0 à 3 chiffres octaux\n"
+"      \\xHH\tle caractère sur 8 bits dont la valeur est HH (hexadécimal).  "
+"HH\n"
+"    \t\tpeut être composé de 1 ou 2 chiffres hexadécimaux\n"
+"    \t\tHHHH peut être composé de un à quatre chiffres hexadécimaux.\n"
+"      \\UHHHHHHHH le caractère Unicode dont la valeur est la valeur "
+"hexadécimale\n"
+"    \t\tHHHHHHHH. HHHHHHHH peut avoir un à huit chiffres hexadécimaux.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de succès à moins qu'une erreur d'écriture survienne."
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Écrit des arguments sur la sortie standard.\n"
+"    \n"
+"    Affiche les ARGs sur la sortie standard, suivis d'un retour à la ligne.\n"
+"    \n"
+"    Options :\n"
+"      -n\tpas de retour à la ligne\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de succès à moins qu'une erreur d'écriture survienne."
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"Active et désactive les commandes intégrées.\n"
+"    \n"
+"    Active et désactive les commandes intégrées du shell.  Les désactiver "
+"vous permet\n"
+"    d'exécuter une commande du disque ayant le même nom qu'une commande du "
+"shell\n"
+"    sans utiliser le chemin complet vers le fichier.\n"
+"    \n"
+"    Options :\n"
+"      -a\taffiche la liste des commandes intégrées et leur état "
+"d'activation\n"
+"      -n\tdésactive chaque NOM ou affiche la liste des commandes "
+"désactivées\n"
+"      -p\taffiche la liste des commandes dans un format réutilisable\n"
+"      -s\taffiche seulement les noms des commandes Posix de type « special "
+"»\n"
+"    \n"
+"    Options contrôlant le chargement dynamique :\n"
+"      -f\tCharge la commande intégrée NOM depuis la bibliothèque partagée "
+"FILENAME\n"
+"      -d\tDécharge une commande chargée avec « -f »\n"
+"    \n"
+"    S'il n'y a pas d'option, chaque commande NOM est activée.\n"
+"    \n"
+"    Pour utiliser le « test » trouvé dans $PATH au lieu de celui intégré au "
+"shell,\n"
+"    saisissez « enable -n test ».\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de succès à moins que NOM ne soit pas une commande "
+"intégrée ou qu'une erreur ne survienne."
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Exécute des arguments comme s'ils étaient une commande du shell.\n"
+"    \n"
+"    Combine des ARGs en une chaîne unique, utilise le résultat comme entrée "
+"du shell,\n"
+"    puis exécute la commande résultante.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le même code de sortie que la commande, ou le code de succès si "
+"la commande est vide."
+
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"Analyse les options en arguments.\n"
+"    \n"
+"    « getopts » est utilisé par les procédures du shell pour analyser les \n"
+"    paramètres de position.\n"
+"    \n"
+"    OPTSTRING contient les lettres d'options qui devront être reconnues ;\n"
+"    si une lettre est suivie par un deux-points, elle devra posséder un\n"
+"    argument séparé d'elle par une espace.\n"
+"    \n"
+"    À chaque fois qu'elle est appelée, « getopts » place l'option suivante\n"
+"    dans la variable de shell « $nom », en l'initialisant si elle n'existe "
+"pas,\n"
+"    et place l'index de l'argument suivant dans la variable de shell "
+"OPTIND.\n"
+"    OPTIND est initialisé à 1 à chaque fois que le shell ou qu'un script "
+"shell\n"
+"    est appelé.  Lorsqu'une option nécessite un argument, « getopts » place "
+"cet\n"
+"    argument dans la variable de shell OPTARG.\n"
+"    \n"
+"    « getopts » signale les erreurs de deux manières.  Si le premier "
+"caractère\n"
+"    d'OPTSTRING est un deux-points, « getopts » utilise un signalement "
+"d'erreur\n"
+"    silencieux. Dans ce mode aucun message d'erreur n'est affiché. Si une "
+"option\n"
+"    incorrecte est rencontrée, « getopts » place dans OPTARG le caractère "
+"d'option\n"
+"    trouvé. Si un argument nécessaire n'est pas trouvé, « getopts » place un "
+"« : »\n"
+"    dans NOM et place dans OPTARG le caractère d'option trouvé.  Si « "
+"getopts »\n"
+"    n'est pas en mode silencieux et qu'une option incorrecte est rencontrée, "
+"il\n"
+"    place « ? » dans NAME et efface OPTARG.  Si un argument nécessaire n'est "
+"pas\n"
+"    trouvé, un « ? » est placé dans NAME, OPTARG est effacé et un message "
+"de\n"
+"    diagnostic est affiché.\n"
+"    \n"
+"    Si la variable de shell OPTERR possède la valeur 0, « getopts » "
+"désactive\n"
+"    l'affichage des messages d'erreur, même si le premier caractère "
+"d'OPTSTRING\n"
+"    n'est pas un deux-points. OPTERR possède la valeur 1 par défaut.\n"
+"    \n"
+"    « getopts » analyse habituellement les paramètres de position ($0 - $9), "
+"mais\n"
+"    si plus d'argument sont données, ils sont analysés à la place.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de succès si une option est trouvée, le code d'échec si "
+"la fin des options\n"
+"    est rencontrée ou si une erreur survient."
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"Remplace le shell par la commande fournie.\n"
+"    \n"
+"    Exécute la COMMANDE, en remplaçant ce shell par le programme spécifié.\n"
+"    Les ARGUMENTS deviennent ceux de la COMMANDE. Si la COMMANDE n'est pas "
+"fournie,\n"
+"    les redirections prennent effet dans le shell courant.\n"
+"    \n"
+"    Options :\n"
+"      -a nom\tpasse NOM comme argument numéro 0 à la COMMANDE\n"
+"      -c\texécute la COMMANDE avec un environnement vide\n"
+"      -l\tplace un tiret comme argument numéro 0 de la COMMANDE\n"
+"    \n"
+"    Si la commande ne peut pas être exécutée, un shell non-interactif se "
+"termine,\n"
+"    à moins que l'option « execfail » ne soit définie.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de succès à moins que la COMMANDE ne soit pas trouvée "
+"ou\n"
+"    qu'une erreur de redirection ne survienne."
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Termine le shell.\n"
+"    \n"
+"    Termine le shell avec le code de retour « N ».  Si N est omis, le code\n"
+"    de retour est celui de la dernière commande exécutée."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Termine un shell de connexion.\n"
+"    \n"
+"    Termine un shell de connexion avec le code de sortie N.  Renvoie une "
+"erreur\n"
+"    s'il n'est pas exécuté dans un shell de connexion."
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"Affiche ou exécute des commandes issues de l'historique.\n"
+"    \n"
+"    « fc » est utilisé pour afficher ou modifier puis ré-exécuter les "
+"commandes\n"
+"    de l'historique des commandes. PREMIER et DERNIER peuvent être des "
+"nombres\n"
+"    indiquant la plage ou PREMIER peut être une chaîne donnant le début de "
+"la\n"
+"    commande la plus récente recherchée.\n"
+"    \n"
+"    Options :\n"
+"       -e ENAME\tdéfinit quel éditeur utiliser. Par défaut il s'agit de « "
+"FCEDIT »\n"
+"    \t\tpuis « EDITOR », puis « vi »\n"
+"       -l\taffiche les lignes au lieu de les éditer\n"
+"       -n\tn'affiche pas les numéros de ligne\n"
+"       -r\tinverse l'ordre des lignes (les plus récentes en premier)\n"
+"    \n"
+"    En tapant « fc -s [motif=rempl ...] [commande] », la commande est ré-"
+"exécutée\n"
+"    après avoir effectué le remplacement ANCIEN=NOUVEAU.\n"
+"    \n"
+"    Un alias utile est « r='fc -s' » de sorte qu'en tapant « r cc »,\n"
+"    la dernière commande commençant par « cc » est ré-exécutée et avec « r "
+"», la\n"
+"    dernière commande est ré-exécutée.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de succès ou le code de sortie de la commande exécutée ; "
+"autre\n"
+"    chose que 0 si une erreur survient."
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Déplace une tâche au premier plan.\n"
+"    \n"
+"    Place JOB_SPEC au premier plan et en fait la tâche actuelle. Si\n"
+"    JOB_SPEC n'est pas fourni, le shell utilise sa propre notion\n"
+"    de tâche actuelle.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Celui de la commande placée au premier plan ou le code d'échec si une "
+"erreur survient."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Déplace des tâches vers l'arrière plan.\n"
+"    \n"
+"    Place chaque JOB_SPEC en arrière plan comme s'il avait été démarré avec "
+"« & ».\n"
+"    Si JOB_SPEC n'est pas fourni, le shell utilise sa propre notion\n"
+"    de tâche actuelle.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de succès à moins que le contrôle de tâche ne soit pas "
+"activé\n"
+"    ou qu'une erreur ne survienne."
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"Mémorise ou affiche l'emplacement des programmes.\n"
+"    \n"
+"    Détermine et mémorise le chemin complet de chaque commande NOM.  Si\n"
+"    aucun argument n'est donné, une information sur les commandes mémorisées "
+"est\n"
+"    affichée.\n"
+"    \n"
+"    Options :\n"
+"      -d\toublie l'emplacement mémorisé de chaque NOM\n"
+"      -l\taffiche dans un format qui peut être réutilisé comme entrée\n"
+"      -p nomchemin\tutilise NOMCHEMIN comme le chemin complet de NOM\n"
+"      -r\toublie tous les emplacements mémorisés\n"
+"      -t\taffiche l'emplacement mémorisé de chaque NOM, en précédant\n"
+"    \t\tchaque emplacement du NOM correspondant si plusieurs NOMS\n"
+"    \t\tsont donnés\n"
+"    Arguments :\n"
+"      NOM\tChaque NOM est recherché dans $PATH et ajouté à la liste\n"
+"    \t\tdes commandes mémorisée.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de succès à moins que le NOM ne soit pas trouvé ou\n"
+"    qu'une option non valable ne soit donnée."
+
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Affiche des informations sur les commandes intégrées.\n"
+"    \n"
+"    Affiche de courts résumés des commandes intégrées.  Si MOTIF est\n"
+"    spécifié, une aide détaillée de toutes les commandes correspondantes\n"
+"    au MOTIF est affichée, sinon la liste des sujets d'aide est affichée.\n"
+"    \n"
+"    Options :\n"
+"      -d\taffiche une courte description pour chaque sujet\n"
+"      -m\taffiche l'aide dans un format proche des pages de man(uel)\n"
+"      -s\tn'affiche qu'une courte aide pour chaque sujet correspondant au\n"
+"    \t\tMOTIF\n"
+"    \n"
+"    Arguments :\n"
+"      MOTIF\tMotif spécifiant un sujet d'aide\n"
+"    \n"
+"    Code de retour :\n"
+"    Renvoie le code de succès à moins que le MOTIF ne soit pas trouvé ou "
+"qu'une\n"
+"    option non valable ne soit donnée."
+
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Affiche ou manipule l'historique.\n"
+"    \n"
+"    Affiche l'historique avec les numéros de lignes en préfixant chaque "
+"élément\n"
+"    modifié d'un « * ».  Un argument égal à N limite la liste aux N derniers "
+"éléments.\n"
+"    \n"
+"    Options :\n"
+"      -c\tefface la liste d'historique en supprimant tous les éléments\n"
+"      -d offset\tefface l'élément d'historique à l'emplacement OFFSET. Un "
+"offset négatif\n"
+"    \t\tcompte à partir de la fin de la liste de l'historique\n"
+"    \n"
+"      -a\tajoute les lignes d'historique de cette session au fichier "
+"d'historique\n"
+"      -n\tlit toutes les lignes d'historique non déjà lues depuis le fichier "
+"d'historique\n"
+"    \t\tet les ajoute à la liste de l'historique\n"
+"      -r\tlit le fichier d'historique et ajoute le contenu à la liste "
+"d'historique\n"
+"      -w\técrit l'historique actuelle dans le fichier d'historique\n"
+"    \n"
+"      -p\teffectue un développement de l'historique sur chaque ARG et "
+"affiche le résultat\n"
+"    \t\tsans le stocker dans la liste d'historique\n"
+"      -s\tajoute les ARGs à la liste d'historique comme entrée unique\n"
+"    \n"
+"    Si NOMFICHIER est donné, il est utilisé comme fichier d'historique. "
+"Sinon,\n"
+"    si HISTFILE contient une valeur, celle-ci est utilisée, sinon ~/."
+"bash_history.\n"
+"    \n"
+"    Si la variable HISTTIMEFORMAT est définie et n'est pas vide, sa valeur "
+"est utilisée\n"
+"    comme chaîne de format pour que strftime(3) affiche l'horodatage "
+"associé\n"
+"    à chaque entrée d'historique.  Sinon, aucun horodatage n'est affiché.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de succès à moins qu'une option non valable soit donnée "
+"ou\n"
+"    qu'une erreur ne survienne."
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"Affiche l'état des tâches.\n"
+"    \n"
+"    Affiche la liste des tâches actives.  JOBSPEC restreint l'affichage à\n"
+"    cette tâche. S'il n'y a pas d'option, l'état de toutes les tâches "
+"actives\n"
+"    est affiché.\n"
+"    \n"
+"    Options :\n"
+"      -l\taffiche les IDs de processus en plus des informations normales\n"
+"      -n\taffiche seulement les processus dont l'état a changé depuis la\n"
+"    \t\tdernière notification\n"
+"      -p\taffiche seulement les IDs de processus\n"
+"      -r\trestreint l'affichage aux tâches en cours d'exécution\n"
+"      -s\trestreint l'affichage aux tâches stoppées\n"
+"    \n"
+"    Si « -x » est fournie, la COMMANDE est lancée après que toutes les\n"
+"    spécifications qui apparaissent dans ARGs ont été remplacées par l'ID "
+"de\n"
+"    processus du leader de groupe de processus de cette tâche.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de succès à moins qu'une option non valable ne soit "
+"donnée\n"
+"    ou qu'une erreur ne survienne. Si « -x » est utilisée, le code de sortie "
+"de\n"
+"    la COMMANDE est renvoyé."
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"Retire des tâches du shell courant.\n"
+"    \n"
+"    Retire chaque argument JOBSPEC de la table des tâches actives.  Sans\n"
+"    JOBSPEC, le shell utilise sa propre notion de tâche courante.\n"
+"    \n"
+"    Options :\n"
+"      -a\tretire toutes les tâches si JOBSPEC n'est pas fourni\n"
+"      -h\tmarque chaque JOBSPEC de façon que SIGHUP ne soit pas envoyé à la "
+"tâche\n"
+"    \t\tsi le shell reçoit un SIGHUP\n"
+"      -r\tretire seulement les tâches en cours de fonctionnement\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de succès à moins qu'une option ou un JOBSPEC non\n"
+"    valable ne soit donné."
+
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Envoie un signal à une tâche.\n"
+"    \n"
+"    Envoie le signal nommé par SIGSPEC ou SIGNUM au processus identifié par\n"
+"    PID ou JOBSPEC. Si SIGSPEC et SIGNUM ne sont pas donnés, alors SIGTERM "
+"est\n"
+"    envoyé.\n"
+"    \n"
+"    Options :\n"
+"      -s sig\tSIG est un nom de signal\n"
+"      -n sig\tSIG est un numéro de signal\n"
+"      -l\taffiche la liste des noms de signaux ; si des arguments suivent « -"
+"l »,\n"
+"    \t\tils sont supposés être des numéros de signaux pour lesquels les noms "
+"doivent\n"
+"    \t\têtre affichés\n"
+"      -L\tsynonyme de -l\n"
+"    \n"
+"    « kill » est une commande intégrée pour deux raisons : elle permet aux "
+"IDs de\n"
+"    tâches d'être utilisés à la place des IDs de processus et elle permet "
+"aux\n"
+"    processus d'être tués si la limite du nombre de processus que vous "
+"pouvez créer\n"
+"    est atteinte.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de succès à moins qu'une option non valable soit donnée "
+"ou qu'une\n"
+"    erreur ne survienne."
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"Évalue des expressions arithmétiques.\n"
+"    \n"
+"    Chaque ARG est une expression arithmétique à évaluer. L'évaluation\n"
+"    est faite avec des entiers de largeur fixe sans vérification de\n"
+"    dépassement, mais la division par zéro est interceptée et\n"
+"    signalée comme une erreur. La liste suivante d'opérateurs\n"
+"    est groupée par niveau d'égale priorité. Les niveaux sont listés\n"
+"    par priorité décroissante.\n"
+"    \n"
+"    \tid++, id--\tpost-incrément ou post-décrément de variable\n"
+"    \t++id, --id\tpré-incrément ou pré-décrément de variable\n"
+"    \t-, +\t\tmoins unaire, plus unaire\n"
+"    \t!, ~\t\tnégations logique et binaire\n"
+"    \t**\t\tmise en exposant\n"
+"    \t*, /, %\t\tmultiplication, division, reste de la division\n"
+"    \t+, -\t\taddition, soustraction\n"
+"    \t<<, >>\t\tdécalage binaire à gauche et à droite\n"
+"    \t<=, >=, <, >\tcomparaison\n"
+"    \t==, !=\t\tégalité, inégalité\n"
+"    \t&\t\tET binaire\n"
+"    \t^\t\tOU binaire exclusif\n"
+"    \t|\t\tOU binaire\n"
+"    \t&&\t\tET logique\n"
+"    \t||\t\tOU logique\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\topérateur de condition\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\taffectation\n"
+"    \n"
+"    Les variables de shell sont autorisées comme opérandes. Le nom de la\n"
+"    variable est remplacé par sa valeur (contrainte à un entier de largeur\n"
+"    fixe) à l'intérieur d'une expression. La variable n'a pas besoin "
+"d'avoir\n"
+"    son attribut d'entier activé pour être utilisée dans une expression.\n"
+"    \n"
+"    Les opérateurs sont évalués dans leur ordre de priorité. Les sous-"
+"expressions\n"
+"    entre parenthèses sont évaluées en premier et peuvent être prioritaires "
+"sur\n"
+"    les règles ci-dessus.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Si le dernier ARG est évalué à 0, « let » renvoie 1, sinon 0 est renvoyé."
+
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"Lit une ligne depuis l'entrée standard et la découper en morceaux.\n"
+"    \n"
+"    Lit une simple ligne depuis l'entrée standard ou depuis le descripteur "
+"de\n"
+"    fichier FD si l'option « -u » est fournie.  La ligne est découpée en "
+"morceaux\n"
+"    comme des mots, et le premier mot est assigné au premier NOM, le "
+"deuxième mot\n"
+"    au deuxième NOM, et ainsi de suite, le dernier NOM récupérant la liste "
+"des mots\n"
+"    restants. Seuls les caractères trouvés dans $IFS sont reconnus comme "
+"délimiteurs\n"
+"    de mots\n"
+"    \n"
+"    Si aucun NOM n'est fourni, la ligne lue est stockée dans la variable "
+"REPLY.\n"
+"    \n"
+"    Options :\n"
+"      -a tableau\taffecte les mots lus séquentiellement aux indices de la "
+"variable\n"
+"    \t\ttableau ARRAY en commençant à 0\n"
+"      -d délim\tcontinue jusqu'à ce que le premier caractère de DELIM soit "
+"lu,\n"
+"    \t\tau lieu du retour à la ligne\n"
+"      -e\t\tutilise « Readline » pour obtenir la ligne\n"
+"      -i texte\tUtilise TEXTE comme texte initial pour « Readline »\n"
+"      -n n\ttermine après avoir lu N caractères plutôt que d'attendre\n"
+"    \t\tun retour à la ligne, mais obéi à un délimiteur si moins de N "
+"caractères\n"
+"    \t\tsont lus avant le délimiteur\n"
+"      -N n\ttermine seulement après avoir lu exactement N caractères, à "
+"moins\n"
+"    \t\tque le caractère EOF soit rencontré ou que le délai de lecture "
+"n'expire.\n"
+"    \t\tLes délimiteurs sont ignorés\n"
+"      -p prompt\taffiche la chaîne PROMPT sans retour à la ligne final, "
+"avant de\n"
+"    \t\ttenter une lecture\n"
+"      -r\tne pas permettre aux barres obliques inverses de se comporter "
+"comme\n"
+"    \t\tdes caractères d'échappement\n"
+"      -s\tne pas répéter l'entrée provenant d'un terminal\n"
+"      -t timeout\texpire et renvoie un code d'échec si une ligne d'entrée "
+"complète\n"
+"    \t\tn'est pas lue en moins de TIMEOUT secondes.  La valeur de la "
+"variable TIMEOUT\n"
+"    \t\test le délai d'expiration par défaut.  TIMEOUT peut être un nombre "
+"décimal.\n"
+"    \t\tSi TIMEOUT est à zéro, la lecture se termine immédiatement sans "
+"essayer de\n"
+"    \t\tlire la moindre donnée mais elle renvoie un code de succès "
+"seulement\n"
+"    \t\tsi l'entrée est disponible sur le descripteur de fichier.  Le code\n"
+"    \t\tde sortie est supérieur à 128 si le délai a expiré\n"
+"      -u fd\tlit depuis le descripteur de fichier FD plutôt que l'entrée "
+"standard\n"
+"    \n"
+"    Code de sortie :\n"
+"    Le code de retour est 0, à moins qu'une fin de fichier ne survienne, que "
+"le délai expire,\n"
+"    ou qu'un descripteur de fichier non valable ne soit fourni comme "
+"argument à « -u »."
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"Termine depuis une fonction du shell.\n"
+"    \n"
+"    Entraîne l'arrêt d'une fonction ou d'un script sourcé, avec le code\n"
+"    de retour spécifié par N. Si N est omis, le code de retour est celui\n"
+"    de la dernière commande exécutée à l'intérieur de la fonction ou du\n"
+"    script\n"
+"    \n"
+"    Code de retour :\n"
+"    Renvoie N ou le code d'échec si le shell n'est pas en train d'exécuter\n"
+"    une fonction ou un script."
+
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"Définit ou invalide des valeurs d'options et des paramètres de position du "
+"shell.\n"
+"    \n"
+"    Change la valeur des attributs du shell et des paramètres de position, "
+"ou\n"
+"    affiche les noms et valeurs des variables du shell.\n"
+"    \n"
+"    Options :\n"
+"        -a  Marque pour l'export toutes les variables qui sont modifiées ou "
+"créées.\n"
+"        -b  Averti immédiatement de la fin d'une tâche.\n"
+"        -e  Termine immédiatement si une commande s'arrête avec un code de "
+"retour non nul.\n"
+"        -f  Désactive la génération de nom de fichier (globbing).\n"
+"        -h  Mémorise l'emplacement des commandes après leur recherche.\n"
+"        -k  Place dans l'environnement tous les arguments d'affectation pour "
+"une commande,\n"
+"            pas seulement ceux qui précèdent le nom de la commande.\n"
+"        -m  Active le contrôle de tâche.\n"
+"        -n  Lit les commandes, mais ne les exécute pas.\n"
+"        -o nom-option\n"
+"            Défini la variable correspondant à nom-option :\n"
+"                allexport    identique à -a\n"
+"                braceexpand  identique à -B\n"
+"                emacs        utilise une édition de ligne façon « emacs »\n"
+"                errexit      identique à -e\n"
+"                errtrace     identique à -E\n"
+"                functrace    identique à -T\n"
+"                hashall      identique à -h\n"
+"                histexpand   identique à -H\n"
+"                history      active l'historique des commandes\n"
+"                ignoreeof    ne termine pas le shell à la lecture d'un « EOF "
+"»\n"
+"                interactive-comments\n"
+"                             permet aux commentaires d'apparaître dans les "
+"commandes interactives\n"
+"                keyword      identique à -k\n"
+"                monitor      identique à -m\n"
+"                noclobber    identique à -C\n"
+"                noexec       identique à -n\n"
+"                noglob       identique à -f\n"
+"                nolog        actuellement accepté mais ignoré\n"
+"                notify       identique à -b\n"
+"                nounset      identique à -u\n"
+"                onecmd       identique à -t\n"
+"                physical     identique à -P\n"
+"                pipefail     le code de retour d'un tube est celui de la "
+"dernière commande\n"
+"                             qui s'est terminée avec un code non nul,\n"
+"                             ou zéro si aucune commande ne s'est arrêtée "
+"avec un code non nul.\n"
+"                posix        modifie le comportement de « bash » où les "
+"opérations par défaut\n"
+"                             sont différentes du standard Posix de manière à "
+"correspondre au\n"
+"                             standard\n"
+"                privileged   identique à -p\n"
+"                verbose      identique à -v\n"
+"                vi           utiliser une édition de ligne façon « vi »\n"
+"                xtrace       identique à -x\n"
+"        -p  Option activée lorsque les n° d'identifiants utilisateurs réels "
+"et effectifs ne\n"
+"            sont pas les mêmes. Désactive le traitement du fichier $ENV et "
+"l'importation des\n"
+"            fonctions du shell. Désactiver cette option permet de définir "
+"les uid et gid\n"
+"            effectifs aux valeurs des uid et gid réels.\n"
+"        -t  Termine après la lecture et l'exécution d'une commande.\n"
+"        -u  Traite les variables non définies comme des erreurs lors de la "
+"substitution.\n"
+"        -v  Affiche les lignes d'entrée du shell à leur lecture.\n"
+"        -x  Affiche les commandes et leurs arguments au moment de leur "
+"exécution.\n"
+"        -B  Effectue l'expansion des accolades\n"
+"        -C  Si défini, empêche les fichiers réguliers existants d'être "
+"écrasés par une\n"
+"            redirection de la sortie.\n"
+"        -E  Si défini, l'interception ERR est héritée par les fonctions du "
+"shell.\n"
+"        -H  Active la substitution d'historique façon « ! ». Ceci est actif "
+"par défaut\n"
+"            lorsque le shell est interactif.\n"
+"        -P  Si défini, les liens symboliques ne sont pas suivis lors de "
+"l'exécution des\n"
+"            commandes telles que « cd » qui changent le répertoire courant.\n"
+"        -T  Si défini, l'interception de DEBUG et RETURN est héritée par les "
+"fonctions du shell.\n"
+"        --  Affecte tous les arguments restants aux paramètres de position.\n"
+"            S'il n'y a plus d'argument, les paramètres de position sont\n"
+"            indéfinis.\n"
+"        -   Affecter tous les arguments restants aux paramètres de "
+"position.\n"
+"            Les options « -x » et « -v » sont désactivées.\n"
+"    \n"
+"    Ces indicateurs peuvent être désactivés en utilisant « + » plutôt que « "
+"- ». Ils peuvent\n"
+"    être utilisés lors de l'appel au shell. Le jeu d'indicateurs actuel peut "
+"être trouvé\n"
+"    dans « $- ».  Les n ARGs restants sont des paramètres de position et "
+"sont affectés,\n"
+"    dans l'ordre, à $1, $2, .. $n.  Si aucun ARG n'est donné, toutes les "
+"variables du shell\n"
+"    sont affichées.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de succès à moins qu'une option non valable ne soit "
+"donnée."
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"Annule des valeurs ou des attributs de variables et de fonctions du shell.\n"
+"    \n"
+"    Pour chaque NOM, annule la variable ou fonction correspondante.\n"
+"    \n"
+"    Options :\n"
+"      -f\ttraite chaque NOM comme une fonction du shell\n"
+"      -v\ttraite chaque NOM comme une variable du shell\n"
+"      -n\ttraite chaque NOM comme une référence nommée et annule la "
+"variable\n"
+"    \t\telle-même plutôt que la variable à laquelle elle fait référence\n"
+"    \n"
+"    Sans option, « unset » essaye d'abord d'annuler une variable et, \n"
+"    en cas d'échec, essaye d'annuler la fonction.\n"
+"    \n"
+"    Certaines variables ne peuvent pas être annulées ; consultez aussi « "
+"readonly ».\n"
+"    \n"
+"    Code de retour :\n"
+"    Renvoie le code de succès à moins qu'une option non valable ne soit\n"
+"    donnée ou que NOM soit en lecture seule."
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Définit l'attribut « export » pour des variables du shell.\n"
+"    \n"
+"    Marque chaque NOM pour exportation automatique vers l'environnement des\n"
+"    commandes exécutées ultérieurement.  Si VALEUR est fournie, affecte la "
+"VALEUR\n"
+"    avant l'exportation.\n"
+"    \n"
+"    Options :\n"
+"      -f\tse référer aux fonctions du shell\n"
+"      -n\tenlève la propriété d'exportation de chaque NOM\n"
+"      -p\taffiche une liste de toutes les variables et fonctions exportées\n"
+"    \n"
+"    L'argument « -- » désactive tout traitement postérieur d'options.\n"
+"    \n"
+"    Code de retour :\n"
+"    Renvoie le code de succès à moins qu'une option non valable ne soit "
+"données\n"
+"    ou que NOM ne soit pas valable."
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Marque des variables du shell comme non modifiables.\n"
+"    \n"
+"    Marque chaque NOM comme étant en lecture seule ; les valeurs de ces "
+"NOMs\n"
+"    ne peuvent plus être modifiées par des affectations ultérieures.  Si "
+"VALEUR\n"
+"    est fournie, lui affecter la VALEUR avant le passage en lecture seule.\n"
+"    \n"
+"    Options :\n"
+"      -a\tse réfère à des variables étant des tableaux indexés\n"
+"      -A\tse réfère à des variables étant des tableaux associatifs\n"
+"      -f\tse réfère à des fonctions du shell\n"
+"      -p\taffiche une liste des toutes les fonctions et variables en lecture "
+"seule\n"
+"    \t\tselon que l'option -f est fournie ou non\n"
+"    \n"
+"    Un argument « -- » désactive tout traitement postérieur d'options.\n"
+"    \n"
+"    Code de retour :\n"
+"    Renvoie le code de succès à moins qu'une option non valable ne soit\n"
+"    donnée ou que NOM ne soit pas valable."
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"Décale des paramètres de position.\n"
+"    \n"
+"    Renomme les paramètres de position $N+1,$N+2 ... à $1,$2 ...  Si N n'est "
+"pas\n"
+"    donné, il est supposé égal à 1.\n"
+"    \n"
+"    Code de retour :\n"
+"    Renvoie le code de succès à moins que N soit négatif ou supérieur à $#."
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Exécute des commandes depuis un fichier dans le shell actuel.\n"
+"    \n"
+"    Lit et exécute des commandes depuis NOMFICHIER dans le shell actuel.  "
+"Les\n"
+"    éléments dans $PATH sont utilisés pour trouver le répertoire contenant "
+"NOMFICHIER.\n"
+"    Si des ARGUMENTS sont fournis, ils deviennent les paramètres de "
+"position\n"
+"    lorsque NOMFICHIER est exécuté.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de la dernière commande exécutée dans NOMFICHIER, ou le "
+"code\n"
+"    d'échec si NOMFICHIER ne peut pas être lu."
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Suspend l'exécution du shell.\n"
+"    \n"
+"    Suspend l'exécution de ce shell jusqu'à ce qu'il reçoive un signal "
+"SIGCONT.\n"
+"    À moins que ce soit forcé, les shell de connexion ne peuvent pas être "
+"suspendus.\n"
+"    \n"
+"    Options :\n"
+"      -f\tforce la suspension, même si le shell est un shell de connexion\n"
+"    \n"
+"    Code de retour :\n"
+"    Renvoie le code de succès à moins que le contrôle de tâche ne soit pas "
+"activé\n"
+"    ou qu'une erreur survienne."
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"Évalue une expression conditionnelle.\n"
+"    \n"
+"    Se termine avec le code de retour 0 (vrai) ou 1 (faux) selon\n"
+"    le résultat de l'évaluation de EXPR. Les expressions peuvent être\n"
+"    unaires ou binaires. Les expressions unaires sont souvent utilisées\n"
+"    pour examiner l'état d'un fichier. Il existe aussi des opérateurs de\n"
+"    chaîne, ainsi que des opérateurs de comparaison numériques.\n"
+"    \n"
+"    Le comportement de test dépend du nombre d'arguments.  Consultez la "
+"page\n"
+"    de manuel de bash pour connaître les spécifications complètes.\n"
+"    \n"
+"    Opérateurs sur des fichiers : \n"
+"    \n"
+"      -a FICHIER     Vrai si le fichier existe.\n"
+"      -b FICHIER     Vrai si le fichier est un fichier spécial de bloc.\n"
+"      -c FICHIER     Vrai si le fichier est un fichier spécial de "
+"caractères.\n"
+"      -d FICHIER     Vrai si le fichier est un répertoire.\n"
+"      -e FICHIER     Vrai si le fichier existe.\n"
+"      -f FICHIER     Vrai si le fichier existe et est un fichier régulier.\n"
+"      -g FICHIER     Vrai si le fichier est « set-group-id ».\n"
+"      -h FICHIER     Vrai si le fichier est un lien symbolique.\n"
+"      -L FICHIER     Vrai si le fichier est un lien symbolique.\n"
+"      -k FICHIER     Vrai si le fichier a son bit « sticky » défini.\n"
+"      -p FICHIER     Vrai si le fichier est un tube nommé.\n"
+"      -r FICHIER     Vrai si le fichier est lisible par vous.\n"
+"      -s FICHIER     Vrai si le fichier existe et n'est pas vide.\n"
+"      -S FICHIER     Vrai si le fichier est un socket.\n"
+"      -t FD          Vrai si FD est ouvert sur un terminal.\n"
+"      -u FICHIER     Vrai si le fichier est « set-user-id ».\n"
+"      -w FICHIER     Vrai si le fichier peut être écrit par vous.\n"
+"      -x FICHIER     Vrai si le fichier est exécutable par vous.\n"
+"      -O FICHIER     Vrai si le fichier est effectivement possédé par vous.\n"
+"      -G FICHIER     Vrai si le fichier est effectivement possédé par votre "
+"groupe.\n"
+"      -N FICHIER     Vrai si le fichier a été modifié depuis la dernière "
+"fois qu'il a été lu.\n"
+"    \n"
+"      FICHIER1 -nt FICHIER2 Vrai si le fichier1 est plus récent que le "
+"fichier2 (selon la date\n"
+"                             de modification).\n"
+"    \n"
+"      FICHIER1 -ot FICHIER2 Vrai si le fichier1 est plus vieux que le "
+"fichier2.\n"
+"    \n"
+"      FICHIER1 -ef FICHIER2 Vrai si le fichier1 est un lien physique vers le "
+"fichier2.\n"
+"    \n"
+"    Opérateurs sur des chaînes :\n"
+"    \n"
+"      -z CHAÎNE      Vrai si la chaîne est vide.\n"
+"    \n"
+"      -n CHAÃŽNE\n"
+"         CHAÎNE      Vrai si la chaîne n'est pas vide.\n"
+"    \n"
+"      CHAÃŽNE1 = CHAÃŽNE2\n"
+"                     Vrai si les chaînes sont égales.\n"
+"      CHAÃŽNE1 != CHAÃŽNE2\n"
+"                     Vrai si les chaînes ne sont pas égales.\n"
+"      CHAÃŽNE1 < CHAÃŽNE2\n"
+"                     Vrai si le tri lexicographique place la chaîne1 en "
+"premier.\n"
+"      CHAÃŽNE1 > CHAÃŽNE2\n"
+"                     Vrai si le tri lexicographique place la chaîne1 en "
+"deuxième.\n"
+"    \n"
+"    Autres opérateurs :\n"
+"    \n"
+"      -o OPTION      Vrai si l'OPTION du shell est activée.\n"
+"      -v VAR         Vrai si la variable de shell VAR est définie.\n"
+"      -R VAR         Vrai is la variable VAR est définie est une référence "
+"nommée.\n"
+"      ! EXPR         Vrai si l'EXPRession est fausse.\n"
+"      EXPR1 -a EXPR2 Vrai si les deux expressions sont vraies.\n"
+"      EXPR1 -o EXPR2 Vrai si l'une des deux expressions est vraie.\n"
+"    \n"
+"      arg1 OP arg2   Tests arithmétiques. OP peut être -eq, -ne,\n"
+"                     -lt, -le, -gt ou -ge.\n"
+"    \n"
+"    Les opérateurs arithmétiques binaires renvoient « vrai » si ARG1 est "
+"égal,\n"
+"    non-égal, inférieur, inférieur ou égal, supérieur, supérieur ou égal à "
+"ARG2.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de succès si EXPR est vraie, le code d'échec si EXPR est "
+"fausse ou si\n"
+"    un argument non valable est donné."
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Évalue une expression conditionnelle.\n"
+"    \n"
+"    Ceci est un synonyme de la primitive « test », mais le dernier argument\n"
+"    doit être le caractère « ] », pour fermer le « [ » correspondant."
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Affiche les temps des processus.\n"
+"    \n"
+"    Affiche le cumul des temps utilisateur et système pour le shell et\n"
+"    tous ses processus fils.\n"
+"    \n"
+"    Code de retour :\n"
+"    Toujours le code de succès."
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"Intercepter des signaux et d'autres événements.\n"
+"    \n"
+"    Définit et active des gestionnaires à lancer lorsque le shell reçoit des "
+"signaux\n"
+"    ou sous d'autres conditions.\n"
+"    \n"
+"    La commande ARG doit être lue et exécutée lorsque le shell reçoit le\n"
+"    signal SIGNAL_SPEC. Si ARG est absent (et qu'un unique SIGNAL_SPEC\n"
+"    est fourni) ou égal à « - », tous les signaux spécifiés sont remis\n"
+"    à leur valeur d'origine. Si ARG est une chaîne vide, tous les "
+"SIGNAL_SPEC\n"
+"    sont ignorés par le shell et les commandes qu'ils appellent.\n"
+"    \n"
+"    Si SIGNAL_SPEC est EXIT (0), la commande ARG est exécutée à la sortie du "
+"shell. Si un\n"
+"    SIGNAL_SPEC est DEBUG, ARG est exécuté après chaque commande simple. Si\n"
+"    un SIGNAL_SPEC est RETURN, ARG est exécuté à chaque fois qu'une fonction "
+"shell ou\n"
+"    qu'un script lancé avec . ou source se termine.  Un SIGNAL_SPEC\n"
+"    valant ERR permet d'exécuter ARG à chaque fois qu'un échec d'une "
+"commande engendrerait\n"
+"    la sortie du shell lorsque l'option -e est activée.\n"
+"    \n"
+"    Si aucun argument n'est fourni, « trap » affiche la liste des commandes "
+"associées\n"
+"    à chaque signal.\n"
+"    \n"
+"    Options :\n"
+"      -l\taffiche la liste des noms de signaux et leur numéro correspondant\n"
+"      -p\taffiche les commandes de « trap » associées à chaque SIGNAL_SPEC\n"
+"    \n"
+"    Chaque SIGNAL_SPEC est soit un nom de signal dans <signal.h>\n"
+"    ou un numéro de signal. Les noms de signaux sont insensibles à la casse "
+"et\n"
+"    le préfixe « SIG » est facultatif. Un signal peut être envoyé au\n"
+"    shell avec « kill -signal $$ ».\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de succès à moins que SIGSPEC ne soit pas valable ou "
+"qu'une\n"
+"    option non valable ne soit donnée."
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"Affiche des informations sur le type de commande.\n"
+"    \n"
+"    Pour chaque NOM, indique comment il serait interprété s'il était\n"
+"    utilisé comme un nom de commande.\n"
+"    \n"
+"    Options :\n"
+"      -a\taffiche tous les emplacements contenant un exécutable nommé NOM;\n"
+"    \t\ty compris les alias, les commandes intégrées et les fonctions si et "
+"seulement si\n"
+"    \t\tl'option « -p » n'est pas utilisée\n"
+"      -f\tdésactive la recherche de fonctions du shell\n"
+"      -P\tforce une recherche de CHEMIN pour chaque NOM, même si c'est un "
+"alias,\n"
+"    \t\tune commande intégrée ou une fonction et renvoie le nom du fichier "
+"du disque\n"
+"    \t\tqui serait exécuté\n"
+"      -p\trenvoie le nom du fichier du disque qui serait exécuté sauf si\n"
+"    \t\t« type -t NOM » aurait renvoyé autre chose que « file » auquel cas, "
+"rien\n"
+"    \t\tn'est renvoyé.\n"
+"      -t\taffiche un mot unique parmi « alias », « keyword »,\n"
+"    \t\t« function », « builtin », « file » or « », si NOM est "
+"respectivement un alias,\n"
+"    \t\tun mot réservé du shell, une fonction du shell, une commande "
+"intégrée,\n"
+"    \t\tun fichier du disque ou un nom inconnu\n"
+"    \n"
+"    Arguments :\n"
+"      NOM\tNom de commande à interpréter.\n"
+"    \n"
+"    Code de retour :\n"
+"    Renvoie le code de succès si tous les NOMs sont trouvés, le code d'échec "
+"si l'un\n"
+"    d'entre eux n'est pas trouvé."
+
+#: builtins.c:1431
+#, fuzzy
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Modifie les limites de ressources du shell.\n"
+"    \n"
+"    Fournit un contrôle sur les ressources disponibles au shell et aux "
+"processus\n"
+"    qu'il crée, sur les systèmes qui permettent un tel contrôle. \n"
+"    \n"
+"    Options :\n"
+"        -S\tutilise la limite de ressources « soft »\n"
+"        -H\tutilise la limite de ressources « hard »\n"
+"        -a\ttoutes les limites actuelles sont présentées\n"
+"        -b\tla taille du tampon de socket\n"
+"        -c\ttaille maximale des fichiers « core » créés\n"
+"        -d\ttaille maximale du segment de données d'un processus\n"
+"        -e\tla priorité maximale d'ordonnancement (« nice »)\n"
+"        -f\tla taille maximale des fichiers écrits par le shell et ses fils\n"
+"        -i\tle nombre maximal de signaux en attente\n"
+"        -k\tle nombre maximal de kqueues allouées pour ce processus\n"
+"        -l\tla taille maximale qu'un processus peut verrouiller en mémoire\n"
+"        -m\tla taille maximale de « set » résident\n"
+"        -n\tle nombre maximal de descripteurs de fichiers ouverts\n"
+"        -p\tla taille du tampon pour les tubes\n"
+"        -q\tle nombre maximal d'octets dans les queues de messages POSIX\n"
+"        -r\tla priorité maximale pour l'ordonnancement temps-réel\n"
+"        -s\tla taille maximale de la pile\n"
+"        -t\tla quantité maximale de temps processeur en secondes\n"
+"        -u\tle nombre maximal de processus utilisateurs\n"
+"        -v\tla taille de la mémoire virtuelle\n"
+"        -x\tle nombre maximal de verrous de fichiers\n"
+"        -P\tle nombre maximal de pseudo terminaux\n"
+"        -T\tle nombre maximal de threads\n"
+"        \n"
+"    Toutes les options ne sont pas disponibles sur toutes les plates-"
+"formes.\n"
+"    \n"
+"    Si LIMIT est fournie, elle est utilisée comme nouvelle valeur de "
+"ressource.\n"
+"    Les valeurs spéciales de LIMIT « soft », « hard » et « unlimited » "
+"correspondent\n"
+"    respectivement aux valeurs actuelles de la limite souple, de la limite "
+"dure,\n"
+"    ou à une absence de limite. Sinon la valeur actuelle de la limite est "
+"affichée\n"
+"    Si aucune option n'est donnée, « -f » est supposée.\n"
+"    \n"
+"    Les valeurs sont des multiples de 1024 octets, sauf pour « -t » qui "
+"prend des\n"
+"    secondes, « -p » qui prend un multiple de 512 octets et « -u » qui prend "
+"un nombre\n"
+"    de processus sans unité.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de succès à moins qu'une option non valable ne soit "
+"fournie ou\n"
+"    qu'une erreur ne survienne."
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"Affiche ou définit le masque de mode de fichier.\n"
+"    \n"
+"    Définit le masque de création de fichier comme étant MODE.  Si MODE est "
+"omis,\n"
+"    affiche la valeur courante du MASQUE.\n"
+"    \n"
+"    Si MODE commence par un chiffre, il est interprété comme un nombre "
+"octal ;\n"
+"    sinon comme une chaîne de symboles de mode comme ceux acceptés par "
+"chmod(1).\n"
+"    \n"
+"    Options :\n"
+"      -p\tsi MODE est omis, affiche sous une forme réutilisable en entrée\n"
+"      -S\taffiche sous forme symbolique, sinon la sortie octale est "
+"utilisée\n"
+"    \n"
+"    Code de retour :\n"
+"    Renvoie le code de succès à moins que MODE ne soit pas valable ou "
+"qu'une\n"
+"    option non valable ne soit donnée."
+
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"Attend la fin d'une tâche et renvoie le code de retour.\n"
+"    \n"
+"    Attend la fin du processus identifié par ID, qui peut être un ID de "
+"processus\n"
+"    ou une spécification de tâche, et renvoie son code de retour.  Si ID "
+"n'est\n"
+"    pas donné, la commande attend la fin de tous les processus actifs en "
+"cours et\n"
+"    le code de retour est zéro.  Si ID est une spécification de tâche, la "
+"commande\n"
+"    attend tous les processus dans le pipeline de la tâche.\n"
+"    \n"
+"    Si l'option -n est fournie, attend la fin de la prochaine tâche et "
+"retourne\n"
+"    son code de retour.\n"
+"    \n"
+"    Si l'option -f est fournie et que le contrôle de tâche est activé, "
+"attends que\n"
+"    le ID spécifié soit terminé au lieu d'attendre qu'il change de statut.\n"
+"    \n"
+"    Code de retour :\n"
+"    Renvoie le même code que celui d'ID, ou le code d'échec si ID n'est pas "
+"valable\n"
+"    ou en cas d'option non valable."
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"Attend la fin d'un processus et renvoie le code de sortie.\n"
+"    \n"
+"    Attend la fin de chaque processus spécifié par un PID et donne son code "
+"de\n"
+"    retour. Si PID n'est pas mentionné, la fin de tous les processus fils\n"
+"    actuellement actifs est attendue et le code de retour est zéro. PID doit "
+"être\n"
+"    un ID de processus.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de retour du dernier PID. Échoue si PID n'est pas "
+"valable ou\n"
+"    si une option non valable est donnée."
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Exécute des commandes pour chaque membre d'une liste.\n"
+"    \n"
+"    La boucle « for » exécute une suite de commandes pour chaque membre "
+"d'une\n"
+"    liste d'éléments. Si « in MOTS ...; » n'est pas fourni, « in \"$@\" » "
+"est\n"
+"    utilisé. Pour chaque élément dans MOTS, NOM est défini à cet élément,\n"
+"    et les COMMANDES sont exécutées.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de la dernière commande exécutée."
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Boucle « for » arithmétique.\n"
+"    \n"
+"    Équivalent à\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 sont des expressions arithmétiques.  Si une "
+"expression\n"
+"    est omise, elle se comporte comme si elle était évaluée à 1.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de la dernière commande exécutée."
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Sélectionne des mots d'une liste et exécute des commandes.\n"
+"    \n"
+"    Les mots WORDS subissent une expansion et génèrent une liste de mots.\n"
+"    L'ensemble de ces mots est affiché dans la sortie d'erreur, chacun\n"
+"    étant précédé d'un nombre. Si « in WORDS » n'est pas fourni, \n"
+"    « in \"$@\" » est utilisé. L'invite PS3 est ensuite affichée et une\n"
+"    ligne est lue depuis l'entrée standard. Si la ligne consiste en\n"
+"    le numéro d'un des mots affichés, alors ce mot est affecté à NAME.\n"
+"    Si la ligne est vide, WORDS et l'invite sont réaffichés. Si un EOF\n"
+"    est lu, la commande se termine. Toute autre valeur lue a pour effet\n"
+"    de vider NAME. La ligne lue est conservée dans la variable REPLY.\n"
+"    Les COMMANDS sont exécutées après chaque sélection jusqu'à ce qu'une\n"
+"    commande « break » soit exécutée.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de la dernière commande exécutée."
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"Signale le temps passé pendant l'exécution d'un tube de commandes.\n"
+"    \n"
+"    Exécute PIPELINE et affiche un résumé du temps réel, du temps "
+"processeur\n"
+"    utilisateur, et du temps processeur système passés à exécuter PIPELINE\n"
+"    lorsque celui-ci se termine.\n"
+"    \n"
+"    Options :\n"
+"      -p\taffiche le résumé dans le format portable Posix.\n"
+"    \n"
+"    La valeur de la variable TIMEFORMAT est utilisée comme format de "
+"sortie.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Le code de retour est celui du PIPELINE."
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Exécute des commandes selon une correspondance de motif.\n"
+"    \n"
+"    Exécute de manière sélective les COMMANDES selon la correspondance du "
+"MOT\n"
+"    au MOTIF. Le caractère « | » est utilisé pour séparer les différents "
+"motifs.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de la dernière commande exécutée."
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Exécute des commandes selon une condition.\n"
+"    \n"
+"    La liste « if COMMANDES » est exécutée. Si elle se termine avec le code "
+"zéro,\n"
+"    alors la liste « then COMMANDES » est exécutée. Sinon, chaque liste\n"
+"    « elif COMMANDES » est exécutée à son tour et si son code de retour est "
+"zéro,\n"
+"    la liste « then COMMANDES » correspondante est exécutée et la commande « "
+"if »\n"
+"    se termine. Sinon, la liste « else COMMANDES » est exécutée si elle "
+"existe.\n"
+"    Le code de retour de l'ensemble est celui de la dernière commande "
+"exécutée\n"
+"    ou zéro si aucune condition n'était vraie.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de la dernière commande exécutée."
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Exécute des commandes aussi longtemps qu'elles réussissent.\n"
+"    \n"
+"    Effectue une expansion et exécute les COMMANDES aussi longtemps\n"
+"    que la commande finale du « while » se termine avec un code de\n"
+"    retour à zéro.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de la dernière commande exécutée."
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Exécute des commandes aussi longtemps qu'un test échoue.\n"
+"    \n"
+"    Effectue une expansion et exécute les commandes « COMMANDES »\n"
+"    aussi longtemps que les commandes de « until » se terminent avec\n"
+"    un code de retour différent de zéro.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de la dernière commande exécutée."
+
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"Crée un coprocessus nommé NOM.\n"
+"    \n"
+"    Exécute la COMMANDE de manière asynchrone, en connectant la sortie et\n"
+"    l'entrée standard de la commande par un tube aux descripteurs de "
+"fichiers\n"
+"    affectés aux indices 0 et 1 d'une variable tableau NOM dans le shell en\n"
+"    cours d'exécution. Le NOM par défaut est « COPROC ».\n"
+"    \n"
+"    Code de retour :\n"
+"    La commande coproc renvoie le code de sortie 0."
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"Définit une fonction du shell.\n"
+"    \n"
+"    Crée une fonction du shell nommée NOM.  Lorsqu'appelée comme une simple "
+"commande,\n"
+"    NOM lance la COMMANDE dans le contexte du shell qui l'appelle.  Lorsque "
+"NOM est appelé,\n"
+"    les arguments sont transmis à la fonction comme $1...$n, et le nom de la "
+"fonction\n"
+"    est $FUNCNAME.\n"
+"    \n"
+"    Code de retour :\n"
+"    Renvoie le code de succès à moins que NOM ne soit en lecture seule."
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Groupe plusieurs commandes en une seule.\n"
+"    \n"
+"    Lance un ensemble de commandes d'un groupe. Ceci est une façon de\n"
+"    rediriger tout un ensemble de commandes.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de la dernière commande exécutée."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"Reprend une tâche en arrière plan.\n"
+"    \n"
+"    Équivalent à l'argument JOB_SPEC de la commande « fg ». Reprend "
+"l'exécution\n"
+"    d'une tâche stoppée ou en tâche de fond. JOB_SPEC peut spécifier soit\n"
+"    un nom soit un numéro de tâche. Faire suivre JOB_SPEC de « & » permet "
+"de\n"
+"    placer la tâche en arrière plan, comme si la spécification de tâche "
+"avait\n"
+"    été fournie comme argument de « bg ».\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de la commande reprise."
+
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Évalue une expression arithmétique.\n"
+"    \n"
+"    L'EXPRESSION est évaluée selon les règles d'évaluation arithmétique.\n"
+"    C'est équivalent à « let EXPRESSION ».\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie 1 si EXPRESSION est évaluée à 0, sinon renvoie 0."
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"Exécute une commande conditionnelle.\n"
+"    \n"
+"    Renvoie le code de retour 0 ou 1 dépendant de l'évaluation de "
+"l'EXPRESSION\n"
+"    conditionnelle. Les expressions sont formées de la même façon que pour "
+"la\n"
+"    primitive « test », et peuvent être combinées avec les opérateurs "
+"suivants :\n"
+"    \n"
+"    \t( EXPRESSION )\tRenvoie la valeur de l'EXPRESSION\n"
+"    \t! EXPRESSION\tVrai si l'EXPRESSION est fausse, sinon vrai\n"
+"    \tEXPR1 && EXPR2\tVrai si EXPR1 et EXPR2 sont vraies, faux sinon\n"
+"    \tEXPR1 || EXPR2\tVrai si EXPR1 ou EXPR2 est vraie, faux sinon\n"
+"    \n"
+"    Lorsque les opérateurs « == » et « != » sont utilisés, la chaîne à "
+"droite de\n"
+"    l'opérateur est utilisée comme motif, et une mise en correspondance est "
+"effectuée.\n"
+"    Lorsque l'opérateur « =~ » est utilisé, la chaîne à droite de "
+"l'opérateur\n"
+"    est mise en correspondance comme une expression rationnelle.\n"
+"    \n"
+"    Les opérateurs « && » et « || » n'évaluent pas EXPR2 si\n"
+"    EXPR1 est suffisant pour déterminer la valeur de l'expression.\n"
+"    \n"
+"    Code de sortie :\n"
+"    0 ou 1 selon la valeur de l'EXPRESSION."
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"Nom et usage de variable shell courantes.\n"
+"    \n"
+"    BASH_VERSION\tNuméro de version de ce Bash.\n"
+"    CDPATH\tUne liste de répertoires, séparés par un deux-points, utilisés\n"
+"    \t\tpar « cd » pour la recherche de répertoires.\n"
+"    GLOBIGNORE\tUne liste de motifs séparés par un deux-points, décrivant "
+"les\n"
+"    \t\tnoms de fichiers à ignorer lors de l'expansion des chemins.\n"
+"    HISTFILE\tLe nom du fichier où votre historique des commandes est "
+"stocké.\n"
+"    HISTFILESIZE\tLe nombre maximal de lignes que ce fichier peut contenir.\n"
+"    HISTSIZE\tLe nombre maximal de lignes d'historique auquel un shell en\n"
+"    \t\tfonctionnement peut accéder.\n"
+"    HOME\tLe chemin complet vers votre répertoire de connexion.\n"
+"    HOSTNAME\tLe nom de la machine actuelle.\n"
+"    HOSTTYPE\tLe type de processeur sur lequel cette version de Bash "
+"fonctionne.\n"
+"    IGNOREEOF\tContrôle l'action du shell à la réception d'un caractère « "
+"EOF »\n"
+"    \t\tcomme seule entrée. Si défini, sa valeur est le nombre de "
+"caractères\n"
+"    \t\t« EOF » qui peuvent être rencontrés à la suite sur une ligne vide\n"
+"    \t\tavant que le shell ne se termine (10 par défaut).\n"
+"    \t\tS'il n'est pas défini, « EOF » signifie la fin de l'entrée.\n"
+"    MACHTYPE\tUne chaîne décrivant le système actuel sur lequel fonctionne "
+"Bash.\n"
+"    MAILCHECK\tLe nombre de secondes séparant deux vérifications du courrier "
+"par Bash.\n"
+"    MAILPATH\tUne liste de fichiers séparés par un deux-points, que Bash "
+"utilise\n"
+"    \t\tpour vérifier les nouveaux courriers.\n"
+"    OSTYPE\tLa version d'Unix sur laquelle cette version de Bash "
+"fonctionne.\n"
+"    PATH\tUne liste de répertoires séparés par un deux-points, utilisés\n"
+"    \t\tpour la recherche des commandes.\n"
+"    PROMPT_COMMAND\tUne commande à exécuter avant d'afficher chaque invite\n"
+"    \t\tde commande principale.\n"
+"    PS1\t\tL'invite de commande principal.\n"
+"    PS2\t\tL'invite secondaire.\n"
+"    PWD\t\tLe chemin complet vers le répertoire actuel.\n"
+"    SHELLOPTS\tLa liste des options activées du shell, séparées par un deux-"
+"points.\n"
+"    TERM\tLe nom du type actuel du terminal.\n"
+"    TIMEFORMAT\tLe format de sortie pour les statistiques de temps "
+"affichées\n"
+"    \t\tpar le mot réservé « time ».\n"
+"    auto_resume\tNon-vide signifie qu'un mot de commande apparaissant\n"
+"    \t\tde lui-même sur une ligne est d'abord recherché dans la liste des\n"
+"    \t\ttâches stoppées. Si elle est trouvée, la tâche est remise en avant-"
+"plan.\n"
+"    \t\tLa valeur « exact » signifie que le mot de commande doit "
+"correspondre\n"
+"    \t\texactement à la commande dans la liste des tâches stoppées.  La "
+"valeur\n"
+"    \t\t« substring » signifie que le mot de commande doit correspondre à "
+"une\n"
+"    \t\tsous-chaîne de la tâche. Une autre valeur signifie que la commande "
+"doit\n"
+"    \t\têtre un préfixe d'une tâche stoppée.\n"
+"    histchars\tCaractères contrôlant l'expansion d'historique et la "
+"substitution\n"
+"    \t\trapide. Le premier caractère est le caractère de substitution "
+"d'historique,\n"
+"    \t\thabituellement « ! ». Le deuxième est le caractère de substitution "
+"rapide,\n"
+"    \t\thabituellement « ^ ». Le troisième est le caractère de commentaire\n"
+"    \t\td'historique, habituellement « # ».\n"
+"    HISTIGNORE\tUne liste de motifs séparés par un deux-points, utilisés "
+"pour\n"
+"    \t\tdécider quelles commandes doivent être conservées dans la liste "
+"d'historique.\n"
+
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Ajoute un répertoire à la pile.\n"
+"    \n"
+"    Ajoute un répertoire en haut de la pile des répertoires, ou permute\n"
+"    la pile, de façon que le répertoire en haut de la pile devienne\n"
+"    le nouveau répertoire de travail. S'il n'y a pas d'argument, les deux\n"
+"    répertoires en haut de la pile sont échangés.\n"
+"    \n"
+"    Options :\n"
+"      -n\tNe change pas de répertoire de travail lorsque des répertoires\n"
+"    \t\tsont ajoutés à la pile, de façon que seule la pile soit manipulée\n"
+"    \n"
+"    Arguments :\n"
+"      +N\tPermute la pile de façon que le Nième répertoire se place en "
+"haut,\n"
+"    \t\ten comptant de zéro depuis la gauche de la liste fournie par « dirs "
+"».\n"
+"    \n"
+"      -N\tPermute la pile de façon que le Nième répertoire se place en "
+"haut,\n"
+"    \t\ten comptant de zéro depuis la droite de la liste fournie par « dirs "
+"».\n"
+"    \n"
+"      dir\tAjoute le répertoire DIR en haut de la pile, et en fait le "
+"nouveau\n"
+"    \t\trépertoire de travail.\n"
+"    \n"
+"    Vous pouvez voir la pile des répertoires avec la commande « dirs ».\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de succès à moins qu'un argument non valable ne soit "
+"fourni\n"
+"    ou que le changement de répertoire n'échoue."
+
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Enlève des répertoires de la pile.\n"
+"    \n"
+"    Enlève des éléments de la pile des répertoires. S'il n'y a pas\n"
+"    d'argument, le répertoire en haut de la pile est enlevé et le\n"
+"    nouveau sommet de la pile devient le répertoire de travail.\n"
+"    \n"
+"    Options :\n"
+"      -n\tNe change pas de répertoire de travail lorsque des répertoires\n"
+"    \t\tsont enlevés de la pile, de façon que seule la pile soit manipulée\n"
+"    \n"
+"    Arguments :\n"
+"      +N\tEnlève le Nième répertoire, en comptant de zéro depuis la gauche\n"
+"    \t\tde la liste fournie par « dirs ». Par exemple : « popd +0 »\n"
+"    \t\tenlève le premier répertoire, « popd +1 » le deuxième.\n"
+"    \n"
+"      -N\tEnlève le Nième répertoire, en comptant de zéro depuis la droite\n"
+"    \t\tde la liste fournie par « dirs ». Par exemple : « popd -0 »\n"
+"    \t\tenlève le dernier répertoire, « popd -1 » l'avant-dernier.\n"
+"    \n"
+"    Vous pouvez voir la pile des répertoires avec la commande « dirs ».\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de succès à moins qu'un argument non valable ne soit "
+"donné\n"
+"    ou que le changement de répertoire n'échoue."
+
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Affiche la pile de répertoire.\n"
+"    \n"
+"    Affiche la liste des répertoires actuellement mémorisés. Les "
+"répertoires\n"
+"    sont insérés dans la liste avec la commande « pushd ». Vous pouvez "
+"remonter\n"
+"    dans la liste en enlevant des éléments avec la commande « popd ».\n"
+"    \n"
+"    Options:\n"
+"      -c\tefface la pile des répertoires en effaçant tous les éléments\n"
+"      -l\tn'affiche pas la version raccourcie (avec ~) des répertoires\n"
+"    \t\trelativement à votre dossier personnel\n"
+"      -p\taffiche la pile des répertoires avec un élément par ligne\n"
+"      -v\taffiche la pile des répertoires avec un élément par ligne,\n"
+"    \t\ten préfixant avec sa position dans la pile\n"
+"    \n"
+"    Arguments :\n"
+"      +N\tAffiche le Nième élément en comptant de zéro depuis la gauche de "
+"la\n"
+"    \t\tliste affichée par « dirs » lorsque celle-ci est appelée sans "
+"option.\n"
+"    \n"
+"      -N\tAffiche le Nième élément en comptant de zéro depuis la droite de "
+"la\n"
+"    \t\tliste affichée par « dirs » lorsque celle-ci est appelée sans "
+"option.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de succès à moins qu'une option non valable ne soit\n"
+"    fournie ou qu'une erreur ne survienne."
+
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"Active ou désactive des options du shell.\n"
+"    \n"
+"    Change la valeur de chaque option du shell NOMOPT.  S'il n'y a pas "
+"d'argument\n"
+"    à l'option, liste chaque NOMOPT fourni ou toutes les options du shell si "
+"aucun\n"
+"    NOMOPT est donné, avec une indication montrant si chacun est actif ou "
+"non.\n"
+"    \n"
+"    Options :\n"
+"      -o\trestreint les NOMOPT à ceux définis pour être utilisés avec « set -"
+"o »\n"
+"      -p\taffiche chaque option du shell en indiquant son état\n"
+"      -q\tsupprime l'affichage\n"
+"      -s\tactive (set) chaque NOMOPT\n"
+"      -u\tdésactive (unset) chaque NOMOPT\n"
+"    \n"
+"    Code de retour :\n"
+"    Renvoie le code de succès si NOMOPT est active ; échec si une option non "
+"valable\n"
+"    est donnée ou si NOMOPT est inactive."
+
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"Formate et affiche des ARGUMENTS en contrôlant le FORMAT.\n"
+"    \n"
+"    Options :\n"
+"      -v var\taffecte la sortie à la variable VAR du shell plutôt que de "
+"l'afficher\n"
+"    \t\tsur la sortie standard\n"
+"    \n"
+"    Le FORMAT est une chaîne de caractères qui contient trois types "
+"d'objets : des caractères\n"
+"    normaux qui sont simplement copiés vers la sortie standard ; des "
+"séquences d'échappement\n"
+"    qui sont converties et copiées vers la sortie standard et des "
+"spécifications de\n"
+"    format, chacun entraînant l'affichage de l'argument suivant.\n"
+"    \n"
+"    En plus des formats standards décrits dans printf(1), « printf » "
+"interprète :\n"
+"    \n"
+"      %b\tdéveloppe les séquences d'échappement à contre-oblique dans "
+"l'argument correspondant\n"
+"      %q\tprotège les arguments avec des guillemets de façon qu'ils puissent "
+"être réutilisés\n"
+"      comme entrée du shell.\n"
+"      %(fmt)T\trenvoie la chaîne date-heure résultant de l'utilisation de "
+"FMT comme\n"
+"    \t        chaîne de format pour strftime(3)\n"
+"    \n"
+"    Le format est réutilisé si nécessaire pour consommer tous les arguments. "
+"Si il y a\n"
+"    moins d'arguments que exigé par le format, les spécificateurs de format "
+"surnuméraires\n"
+"    se comportent comme si la valeur zéro ou une chaîne nulle avait été "
+"fournie (selon\n"
+"    ce qui est approprié).\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de succès à moins qu'une option non valable ne soit "
+"donnée ou qu'une\n"
+"    erreur d'écriture ou d'affectation ne survienne."
+
+#: builtins.c:1971
+#, fuzzy
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Spécifie la façon dont Readline complète les arguments.\n"
+"    \n"
+"    Pour chaque NOM, la commande spécifie la façon dont les arguments sont "
+"complétés\n"
+"    S'il n'y a pas d'option, le réglage actuel est affiché d'une manière\n"
+"    réutilisable comme une entrée.\n"
+"    \n"
+"    Options :\n"
+"      -p\taffiche le réglage d'auto-complètement actuel dans un format "
+"réutilisable\n"
+"      -r\tretire un réglage d'auto-complètement de chaque NOM ou, si aucun "
+"NOM\n"
+"    \t\tn'est fourni, retire tous les réglages\n"
+"      -D\tapplique les auto-complètements et actions comme valeurs par "
+"défaut aux\n"
+"    \t\tcommandes ne possédant aucun auto-complètement spécifique\n"
+"      -E\tapplique les auto-complètements et actions aux commandes vides\n"
+"    \t\t(auto-complètement tenté sur une ligne vide)\n"
+"      -I\tapplique les auto-complètements et actions au mot initial "
+"(habituellement\n"
+"    \t\tla commande)\n"
+"    \n"
+"    Lorsqu'un auto-complètement est tenté, les actions sont appliquées dans "
+"l'ordre\n"
+"    dans lequel les options en majuscule ci-dessus sont listées.  Si "
+"plusieurs\n"
+"    options sont fournies, l'option « -D » est prioritaire sur -E et les "
+"deux sont\n"
+"    prioritaires sur -I.\n"
+"    \n"
+"    Code de retour :\n"
+"    Renvoie le code de succès à moins qu'une option non valable ne soit "
+"fournie ou\n"
+"    qu'une erreur ne survienne."
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Affiche les possibilités de complètement dépendant des options.\n"
+"    \n"
+"    Ceci est destiné à être utilisé depuis une fonction de shell générant\n"
+"    des auto-complètements possibles. Si le MOT optionnel est fourni,\n"
+"    des correspondances avec « MOT » sont générées.\n"
+"    \n"
+"    Code de sortie :\n"
+"    Renvoie le code de succès à moins qu'une option non valable ne soit\n"
+"    fournie ou qu'une erreur ne survienne."
+
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"Modifie ou affiche les options d'auto-complètement.\n"
+"    \n"
+"    Modifie les options d'auto-complètement pour chaque NOM ou, si aucun NOM "
+"n'est\n"
+"    fourni, pour l'auto-complètement actuellement exécuté.  Si aucune OPTION "
+"n'est\n"
+"    donnée, affiche les options d'auto-complètement de chaque NOM ou le "
+"réglage\n"
+"    actuel d'auto-complètement.\n"
+"    \n"
+"    Options :\n"
+"    \t-o option\tDéfini l'option d'auto-complètement OPTION pour chaque NOM\n"
+"    \t-D\t\tChange les options pour l'auto-complètement de commande par "
+"défaut\n"
+"    \t-E\t\tChange les options pour l'auto-complètement de commande vide\n"
+"    \t-I\t\tChange les options pour l'auto-complètement du mot initial\n"
+"    \n"
+"    Utiliser « +o » au lieu de « -o » désactive l'option spécifiée.\n"
+"    \n"
+"    Arguments :\n"
+"    \n"
+"    Chaque NOM correspond à une commande pour laquelle un réglage d'auto-"
+"complètement\n"
+"    doit déjà avoir été défini grâce à la commande intégrée « complete ».  "
+"Si aucun\n"
+"    NOM n'est fourni, « compopt » doit être appelée par une fonction "
+"générant\n"
+"    des auto-complètements ; ainsi les options de ce générateur d'auto-"
+"complètement\n"
+"    en cours d'exécution seront modifiées.\n"
+"    \n"
+"    Code de retour :\n"
+"    Renvoie le code de succès à moins qu'une option non valable ne soit "
+"fournie\n"
+"    ou que NOM n'ait aucun réglage d'auto-complètement."
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"Lit des lignes depuis l'entrée standard vers une variable tableau indexé.\n"
+"    \n"
+"    Lit des lignes depuis l'entrée standard vers la variable tableau indexé "
+"TABLEAU ou\n"
+"    depuis le descripteur de fichier FD si l'option « -u » est utilisée. La "
+"variable\n"
+"    MAPFILE est le TABLEAU par défaut.\n"
+"    \n"
+"    Options :\n"
+"      -d delim\tUtilise DELIM pour terminer les lignes au lieu du saut de "
+"ligne\n"
+"      -n nombre\tCopie au maximum NOMBRE lignes.  Si NOMBRE est 0, toutes "
+"les lignes sont copiées.\n"
+"      -O origine\tCommence l'affectation au TABLEAU à l'indice ORIGINE.  "
+"L'indice par défaut est 0.\n"
+"      -s nombre\tSaute les NOMBRE premières lignes lues.\n"
+"      -t\tRetire les retours à la ligne de chaque ligne lue.\n"
+"      -u fd\tLit les lignes depuis le descripteur de fichier FD au lieu de "
+"l'entrée standard.\n"
+"      -C callback\tÉvalue CALLBACK à chaque fois que QUANTUM lignes sont "
+"lues.\n"
+"      -c quantum\tIndique le nombre de lignes lues entre chaque appel au "
+"CALLBACK.\n"
+"    \n"
+"    Arguments :\n"
+"      TABLEAU\tNom de la variable tableau à utiliser pour les données.\n"
+"    \n"
+"    Si l'option « -C » est fournie sans option « -c », le quantum par défaut "
+"est 5000.\n"
+"    Lorsque CALLBACK est évalué, l'indice du prochain élément de tableau qui "
+"sera affecté\n"
+"    lui est transmis comme argument additionnel.\n"
+"    \n"
+"    Si la commande « mapfile » n'est pas appelée avec une origine explicite, "
+"le tableau est\n"
+"    vidé avant affectation.\n"
+"    \n"
+"    code de retour :\n"
+"    Renvoie le code de succès à moins qu'une option non valable ne soit "
+"donnée ou que\n"
+"    le TABLEAU soit en lecture seule ou ne soit pas un tableau indexé."
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Lit des lignes depuis un fichier vers une variable tableau.\n"
+"    \n"
+"    Synonyme de « mapfile »."
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "Renvoie le contexte de l'appel de sous-routine actuel.\n"
+#~ "    \n"
+#~ "    Sans EXPR, renvoie"
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process : processus %5ld (%s) dans le_pipeline"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "N° de signal inconnu"
+
+#~ msgid "Copyright (C) 2018 Free Software Foundation, Inc."
+#~ msgstr "Copyright (C) 2018 Free Software Foundation, Inc."
+
+#~ msgid "Copyright (C) 2014 Free Software Foundation, Inc."
+#~ msgstr "Copyright (C) 2014 Free Software Foundation, Inc."
+
+#~ msgid ":"
+#~ msgstr ":"
+
+#~ msgid "true"
+#~ msgstr "true"
+
+#~ msgid "false"
+#~ msgstr "false"
+
+#~ msgid "times"
+#~ msgstr "times"
+
+#~ msgid "Copyright (C) 2009 Free Software Foundation, Inc.\n"
+#~ msgstr "Copyright (C) 2009 Free Software Foundation, Inc.\n"
+
+#~ msgid ""
+#~ "License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl."
+#~ "html>\n"
+#~ msgstr ""
+#~ "Licence GPLv2+ : GNU GPL version 2 ou ultérieure <http://gnu.org/licenses/"
+#~ "gpl.html>\n"
+
+#~ msgid ""
+#~ ".  With EXPR, returns\n"
+#~ "    "
+#~ msgstr ""
+#~ ".  Avec EXPR, renvoie\n"
+#~ "    "
+
+#~ msgid ""
+#~ "; this extra information can be used to\n"
+#~ "    provide a stack trace.\n"
+#~ "    \n"
+#~ "    The value of EXPR indicates how many call frames to go back before "
+#~ "the\n"
+#~ "    current one; the top frame is frame 0."
+#~ msgstr ""
+#~ "; ces informations supplémentaires peuvent être utilisées pour\n"
+#~ "    fournir une trace d'appels\n"
+#~ "    \n"
+#~ "    La valeur de EXPR indique le nombre de cadres d'appels duquel il faut "
+#~ "revenir en arrière\n"
+#~ "    avant le cadre actuel ; le cadre supérieur est le cadre 0."
+
+#~ msgid " "
+#~ msgstr " "
+
+#~ msgid "Without EXPR, returns returns \"$line $filename\".  With EXPR,"
+#~ msgstr "Sans « EXPR », renvoie « $ligne $nomfichier ».  Avec « EXPR »,"
+
+#~ msgid "returns \"$line $subroutine $filename\"; this extra information"
+#~ msgstr ""
+#~ "renvoie « $ligne $sousroutine $nomfichier » ; cette information "
+#~ "supplémentaire"
+
+#~ msgid "can be used used to provide a stack trace."
+#~ msgstr "peut être utilisée pour fournir une trace de la pile"
+
+#~ msgid ""
+#~ "The value of EXPR indicates how many call frames to go back before the"
+#~ msgstr ""
+#~ "La valeur de « EXPR » indique le nombre de cadres d'appel dont il faut "
+#~ "reculer"
+
+#~ msgid "current one; the top frame is frame 0."
+#~ msgstr "par rapport à l'actuel ; le cadre supérieur est le cadre 0."
+
+#~ msgid "%s: invalid number"
+#~ msgstr "%s : nombre non valable"
+
+#~ msgid "Shell commands matching keywords `"
+#~ msgstr "Commandes du shell correspondant aux mots-clés « "
+
+#~ msgid "Display the list of currently remembered directories.  Directories"
+#~ msgstr ""
+#~ "Affiche la liste des répertoires actuellement mémorisés. Les répertoires"
+
+#~ msgid "find their way onto the list with the `pushd' command; you can get"
+#~ msgstr "sont insérés dans la pile avec la commande « pushd » ; vous pouvez"
+
+#~ msgid "back up through the list with the `popd' command."
+#~ msgstr ""
+#~ "remonter dans la pile en enlevant des éléments avec la commande « popd »."
+
+#~ msgid ""
+#~ "The -l flag specifies that `dirs' should not print shorthand versions"
+#~ msgstr ""
+#~ "L'option « -l » demande à « dirs » de ne pas afficher sous forme abrégée"
+
+#~ msgid ""
+#~ "of directories which are relative to your home directory.  This means"
+#~ msgstr ""
+#~ "les répertoires relatifs à votre répertoire personnel.  Cela signifie que"
+
+#~ msgid "that `~/bin' might be displayed as `/homes/bfox/bin'.  The -v flag"
+#~ msgstr ""
+#~ "le répertoire « ~/bin » pourra être affiché « /homes/bfox/bin ». L'option "
+#~ "« -v »"
+
+#~ msgid "causes `dirs' to print the directory stack with one entry per line,"
+#~ msgstr "demande à « dirs » d'afficher un répertoire de la pile par ligne,"
+
+#~ msgid ""
+#~ "prepending the directory name with its position in the stack.  The -p"
+#~ msgstr ""
+#~ "en le précédant de sa position dans la pile.  L'option « -p » fait la "
+#~ "même chose"
+
+#~ msgid "flag does the same thing, but the stack position is not prepended."
+#~ msgstr "sans afficher le numéro d'emplacement dans la pile."
+
+#~ msgid ""
+#~ "The -c flag clears the directory stack by deleting all of the elements."
+#~ msgstr ""
+#~ "L'option « -c » vide la pile des répertoires en retirant tous ses "
+#~ "éléments."
+
+#~ msgid ""
+#~ "+N   displays the Nth entry counting from the left of the list shown by"
+#~ msgstr ""
+#~ "+N   affiche la Nième entrée à partir de la gauche de la liste fournie par"
+
+#~ msgid "     dirs when invoked without options, starting with zero."
+#~ msgstr ""
+#~ "     « dirs » lorsqu'elle est appelée sans option, la première entrée "
+#~ "étant zéro."
+
+#~ msgid ""
+#~ "-N   displays the Nth entry counting from the right of the list shown by"
+#~ msgstr ""
+#~ "+N   affiche la Nième entrée à partir de la droite de la liste fournie par"
+
+#~ msgid "Adds a directory to the top of the directory stack, or rotates"
+#~ msgstr ""
+#~ "Ajoute un répertoire au dessus de la pile des répertoires ou effectue une"
+
+#~ msgid "the stack, making the new top of the stack the current working"
+#~ msgstr ""
+#~ "rotation de la pile en plaçant le répertoire supérieur comme répertoire "
+#~ "courant."
+
+#~ msgid "directory.  With no arguments, exchanges the top two directories."
+#~ msgstr ""
+#~ "Sans paramètre, les deux répertoires supérieurs de la pile sont échangés."
+
+#~ msgid "+N   Rotates the stack so that the Nth directory (counting"
+#~ msgstr ""
+#~ "+N   effectue une rotation de la pile de façon que le Nième répertoire "
+#~ "soit"
+
+#~ msgid "     from the left of the list shown by `dirs', starting with"
+#~ msgstr ""
+#~ "placé au dessus (N commençant à zéro et en partant à gauche de la liste"
+
+#~ msgid "     zero) is at the top."
+#~ msgstr " fournie par « dirs »)."
+
+#~ msgid "-N   Rotates the stack so that the Nth directory (counting"
+#~ msgstr ""
+#~ "+N   effectue une rotation de la pile de façon que le Nième répertoire "
+#~ "soit"
+
+#~ msgid "     from the right of the list shown by `dirs', starting with"
+#~ msgstr ""
+#~ "placé au dessus (N commençant à zéro et en partant à gauche de la liste"
+
+#~ msgid "-n   suppress the normal change of directory when adding directories"
+#~ msgstr ""
+#~ "-n   inhibe le changement de répertoire lors d'un ajout de répertoire "
+
+#~ msgid "     to the stack, so only the stack is manipulated."
+#~ msgstr "     à la liste. Seule la pile est manipulée."
+
+#~ msgid "dir  adds DIR to the directory stack at the top, making it the"
+#~ msgstr ""
+#~ "dir  ajoute « DIR » au dessus de la pile des répertoires, en faisant de "
+#~ "lui"
+
+#~ msgid "     new current working directory."
+#~ msgstr "     le nouveau répertoire courant."
+
+#~ msgid "You can see the directory stack with the `dirs' command."
+#~ msgstr ""
+#~ "Vous pouvez voir le contenu de la pile des répertoires avec la commande « "
+#~ "dirs »."
+
+#~ msgid "Removes entries from the directory stack.  With no arguments,"
+#~ msgstr "Enlève des éléments de la pile des répertoires. Sans paramètre,"
+
+#~ msgid "removes the top directory from the stack, and cd's to the new"
+#~ msgstr "le répertoire supérieur de la pile est enlevé et un changement de"
+
+#~ msgid "+N   removes the Nth entry counting from the left of the list"
+#~ msgstr "+N   enlève le Nième élément en commençant à zéro à gauche"
+
+#~ msgid "     shown by `dirs', starting with zero.  For example: `popd +0'"
+#~ msgstr "de la liste affichée par « dirs ». Par exemple, « popd  +0 »"
+
+#~ msgid "     removes the first directory, `popd +1' the second."
+#~ msgstr "     enlève le premier répertoire, « popd  +1 » le second."
+
+#~ msgid "-N   removes the Nth entry counting from the right of the list"
+#~ msgstr "+N   enlève la Nième entrée en commençant à zéro à droite"
+
+#~ msgid "     shown by `dirs', starting with zero.  For example: `popd -0'"
+#~ msgstr "de la liste affichée par « dirs ». Par exemple, « popd  -0 »"
+
+#~ msgid "     removes the last directory, `popd -1' the next to last."
+#~ msgstr "     enlève le dernier répertoire, « popd  -1 » l'avant-dernier."
+
+#~ msgid ""
+#~ "-n   suppress the normal change of directory when removing directories"
+#~ msgstr ""
+#~ "-n   inhibe le changement de répertoire lors de l'enlèvement d'un "
+#~ "répertoire"
+
+#~ msgid "     from the stack, so only the stack is manipulated."
+#~ msgstr "     de la liste. Seule la pile est manipulée."
+
+#~ msgid "allocated"
+#~ msgstr "alloué"
+
+#~ msgid "freed"
+#~ msgstr "libéré"
+
+#~ msgid "requesting resize"
+#~ msgstr "demande de redimensionnement"
+
+#~ msgid "just resized"
+#~ msgstr "redimensionné à l'instant"
+
+#~ msgid "bug: unknown operation"
+#~ msgstr "bogue : opération inconnue"
+
+#~ msgid "malloc: watch alert: %p %s "
+#~ msgstr "malloc : alerte de « watch » : %p %s "
+
+#~ msgid "xrealloc: cannot reallocate %lu bytes (%lu bytes allocated)"
+#~ msgstr "xrealloc : impossible de réallouer %lu octets (%lu octets alloués)"
+
+#~ msgid "xrealloc: cannot allocate %lu bytes"
+#~ msgstr "xrealloc : impossible d'allouer %lu octets"
+
+#~ msgid "xrealloc: %s:%d: cannot reallocate %lu bytes (%lu bytes allocated)"
+#~ msgstr ""
+#~ "xrealloc : %s:%d : impossible de réallouer %lu octets (%lu octets alloués)"
+
+#~ msgid ""
+#~ "Exit from within a FOR, WHILE or UNTIL loop.  If N is specified,\n"
+#~ "    break N levels."
+#~ msgstr ""
+#~ "Permet de sortir d'une boucle FOR, WHILE ou UNTIL.  Si N est précisé,\n"
+#~ "    la sortie de boucle se fait sur N niveaux."
+
+#~ msgid ""
+#~ "Run a shell builtin.  This is useful when you wish to rename a\n"
+#~ "    shell builtin to be a function, but need the functionality of the\n"
+#~ "    builtin within the function itself."
+#~ msgstr ""
+#~ "Lance une primitive du shell. Ceci est utile lorsque vous souhaitez "
+#~ "nommer une fonction comme\n"
+#~ "    une primitive, mais que vous avez besoin d'utiliser la primitive dans "
+#~ "la fonction elle-même."
+
+#~ msgid ""
+#~ "Print the current working directory.  With the -P option, pwd prints\n"
+#~ "    the physical directory, without any symbolic links; the -L option\n"
+#~ "    makes pwd follow symbolic links."
+#~ msgstr ""
+#~ "Affiche le répertoire de travail actuel.  Avec l'option « -P », « pwd » "
+#~ "affiche\n"
+#~ "    le répertoire physique, sans lien symbolique ; l'option « -L »\n"
+#~ "    demande à « pwd » de suivre les liens symboliques."
+
+#~ msgid "Return a successful result."
+#~ msgstr "Renvoie un résultat de succès"
+
+#~ msgid ""
+#~ "Runs COMMAND with ARGS ignoring shell functions.  If you have a shell\n"
+#~ "    function called `ls', and you wish to call the command `ls', you can\n"
+#~ "    say \"command ls\".  If the -p option is given, a default value is "
+#~ "used\n"
+#~ "    for PATH that is guaranteed to find all of the standard utilities.  "
+#~ "If\n"
+#~ "    the -V or -v option is given, a string is printed describing "
+#~ "COMMAND.\n"
+#~ "    The -V option produces a more verbose description."
+#~ msgstr ""
+#~ "Lance la commande COMMAND avec les ARGS en ignorant les fonctions du "
+#~ "shell.  Si vous\n"
+#~ "    avez défini une fonction de shell appelée « ls » et que vous voulez "
+#~ "appeler\n"
+#~ "    la commande « ls », vous pouvez faire « command ls ».  Si l'option « -"
+#~ "p » est\n"
+#~ "    donnée, une valeur par défaut est utilisée pour le PATH garantissant "
+#~ "que tous\n"
+#~ "    les utilitaires standards seront trouvés.  Si l'option « -V » ou « -v "
+#~ "» est\n"
+#~ "    donnée, une description de la commande s'affiche. L'option « -V » "
+#~ "fournit plus\n"
+#~ "    d'informations."
+
+#~ msgid ""
+#~ "Declare variables and/or give them attributes.  If no NAMEs are\n"
+#~ "    given, then display the values of variables instead.  The -p option\n"
+#~ "    will display the attributes and values of each NAME.\n"
+#~ "    \n"
+#~ "    The flags are:\n"
+#~ "    \n"
+#~ "      -a\tto make NAMEs arrays (if supported)\n"
+#~ "      -f\tto select from among function names only\n"
+#~ "      -F\tto display function names (and line number and source file name "
+#~ "if\n"
+#~ "    \tdebugging) without definitions\n"
+#~ "      -i\tto make NAMEs have the `integer' attribute\n"
+#~ "      -r\tto make NAMEs readonly\n"
+#~ "      -t\tto make NAMEs have the `trace' attribute\n"
+#~ "      -x\tto make NAMEs export\n"
+#~ "    \n"
+#~ "    Variables with the integer attribute have arithmetic evaluation (see\n"
+#~ "    `let') done when the variable is assigned to.\n"
+#~ "    \n"
+#~ "    When displaying values of variables, -f displays a function's name\n"
+#~ "    and definition.  The -F option restricts the display to function\n"
+#~ "    name only.\n"
+#~ "    \n"
+#~ "    Using `+' instead of `-' turns off the given attribute instead.  "
+#~ "When\n"
+#~ "    used in a function, makes NAMEs local, as with the `local' command."
+#~ msgstr ""
+#~ "Déclare des variables ou ajoute des attributs aux variables.  Si aucun "
+#~ "nom\n"
+#~ "    n'est donné, affiche plutôt les valeurs des variables.  L'option « -p "
+#~ "»\n"
+#~ "    permet d'afficher les attributs et les valeurs de chaque NAME.\n"
+#~ "    \n"
+#~ "    Les options sont :\n"
+#~ "    \n"
+#~ "      -a\tpour faire des tableaux de NAME (si pris en charge)\n"
+#~ "      -f\tpour choisir uniquement parmi les noms de fonctions\n"
+#~ "      -F\tpour afficher les noms de fonctions (et les numéros de ligne et "
+#~ "le\n"
+#~ "       \tfichier source si le mode de débogage est activé\n"
+#~ "      -i\tpour que les NAME aient l'attribut « integer »\n"
+#~ "      -r\tpour que les NAME soient en lecture seule\n"
+#~ "      -t\tpour que les NAME aient l'attribut « trace »\n"
+#~ "      -x\tpour faire un export des NAME\n"
+#~ "    \n"
+#~ "    L'évaluation arithmétique des variables ayant l'attribut « integer » "
+#~ "est\n"
+#~ "    effectuée au moment de l'affectation (voir « let »).\n"
+#~ "    \n"
+#~ "    Lors de l'affichage des valeurs de variables, -f affiche le nom de la "
+#~ "fonction\n"
+#~ "    et sa définition.  L'option -F permet de n'afficher que le nom.\n"
+#~ "    \n"
+#~ "    Un attribut peut être désactivé en utilisant « + » au lieu de « - ».  "
+#~ "Dans une\n"
+#~ "    fonction, ceci a pour effet de rendre les NAME locaux, comme avec la "
+#~ "commande «local »."
+
+#~ msgid "Obsolete.  See `declare'."
+#~ msgstr "Obsolète. Consulter « declare »."
+
+#~ msgid ""
+#~ "Create a local variable called NAME, and give it VALUE.  LOCAL\n"
+#~ "    can only be used within a function; it makes the variable NAME\n"
+#~ "    have a visible scope restricted to that function and its children."
+#~ msgstr ""
+#~ "Permet de créer une variable locale appelée NAME, et de lui affecter une "
+#~ "VALUE.\n"
+#~ "    LOCAL peut seulement être utilisé à l'intérieur d'une fonction ; il "
+#~ "rend le nom de\n"
+#~ "    variable NAME visible uniquement à l'intérieur de la fonction et de "
+#~ "ses filles."
+
+#~ msgid ""
+#~ "Output the ARGs.  If -n is specified, the trailing newline is suppressed."
+#~ msgstr "Affiche les ARGs. L'option « -n » supprime le saut de ligne final."
+
+#~ msgid ""
+#~ "Enable and disable builtin shell commands.  This allows\n"
+#~ "    you to use a disk command which has the same name as a shell\n"
+#~ "    builtin without specifying a full pathname.  If -n is used, the\n"
+#~ "    NAMEs become disabled; otherwise NAMEs are enabled.  For example,\n"
+#~ "    to use the `test' found in $PATH instead of the shell builtin\n"
+#~ "    version, type `enable -n test'.  On systems supporting dynamic\n"
+#~ "    loading, the -f option may be used to load new builtins from the\n"
+#~ "    shared object FILENAME.  The -d option will delete a builtin\n"
+#~ "    previously loaded with -f.  If no non-option names are given, or\n"
+#~ "    the -p option is supplied, a list of builtins is printed.  The\n"
+#~ "    -a option means to print every builtin with an indication of whether\n"
+#~ "    or not it is enabled.  The -s option restricts the output to the "
+#~ "POSIX.2\n"
+#~ "    `special' builtins.  The -n option displays a list of all disabled "
+#~ "builtins."
+#~ msgstr ""
+#~ "Active et désactive les primitives du shell.  Ceci permet\n"
+#~ "    d'utiliser une commande du disque qui a le même nom qu'une commande "
+#~ "intégrée\n"
+#~ "    sans devoir spécifier un chemin complet.  Si « -n » est utilisé, les\n"
+#~ "    noms NAME sont désactivés ; sinon, les noms NAME sont activés. Par "
+#~ "exemple,\n"
+#~ "    pour utiliser « test » trouvé dans $PATH au lieu de la primitive du\n"
+#~ "    même nom, tapez « enable -n test ».  Sur les systèmes permettant le "
+#~ "chargement\n"
+#~ "    dynamique, l'option « -f » peut être utilisée pour charger de "
+#~ "nouvelles primitives\n"
+#~ "    depuis l'objet partagé FILENAME.  L'option « -d » efface une "
+#~ "primitive précédemment\n"
+#~ "    chargée avec « -f ».  Si aucun nom (n'étant pas une option) n'est "
+#~ "donné, ou si l'option\n"
+#~ "    « -p » est spécifiée, une liste de primitive est affichée.  L'option "
+#~ "« -a » permet d'afficher\n"
+#~ "    toutes les primitives en précisant si elles sont activées ou non. "
+#~ "L'option « -s » restreint\n"
+#~ "    la sortie aux primitives « special » POSIX.2. L'option « -n » affiche "
+#~ "une liste de toutes les\n"
+#~ "    primitives désactivées."
+
+#~ msgid ""
+#~ "Read ARGs as input to the shell and execute the resulting command(s)."
+#~ msgstr ""
+#~ "Lit les ARGs comme une entrée du shell et exécute les commandes "
+#~ "résultantes."
+
+#~ msgid ""
+#~ "Exec FILE, replacing this shell with the specified program.\n"
+#~ "    If FILE is not specified, the redirections take effect in this\n"
+#~ "    shell.  If the first argument is `-l', then place a dash in the\n"
+#~ "    zeroth arg passed to FILE, as login does.  If the `-c' option\n"
+#~ "    is supplied, FILE is executed with a null environment.  The `-a'\n"
+#~ "    option means to make set argv[0] of the executed process to NAME.\n"
+#~ "    If the file cannot be executed and the shell is not interactive,\n"
+#~ "    then the shell exits, unless the shell option `execfail' is set."
+#~ msgstr ""
+#~ "Exécute le fichier FILE en remplaçant ce shell par le programme "
+#~ "spécifié.\n"
+#~ "    Si FILE n'est pas spécifié, les redirections prennent effet dans\n"
+#~ "    ce shell. Si le premier argument est « -l », un tiret est placé dans\n"
+#~ "    l'argument n°0 transmis à FILE, comme le fait « login ». Si l'option\n"
+#~ "    « -c » est fournie, FILE est exécuté avec un environnement vide.\n"
+#~ "    L'option « -a » indique de définir « argv[0] » du processus exécuté\n"
+#~ "    à NAME. Si le fichier ne peut pas être exécuté et que le shell n'est\n"
+#~ "    pas interactif, alors le shell se termine, à moins que l'option « "
+#~ "execfail »\n"
+#~ "    ne soit définie."
+
+#~ msgid "Logout of a login shell."
+#~ msgstr "Fermer un shell de connexion"
+
+#~ msgid ""
+#~ "For each NAME, the full pathname of the command is determined and\n"
+#~ "    remembered.  If the -p option is supplied, PATHNAME is used as the\n"
+#~ "    full pathname of NAME, and no path search is performed.  The -r\n"
+#~ "    option causes the shell to forget all remembered locations.  The -d\n"
+#~ "    option causes the shell to forget the remembered location of each "
+#~ "NAME.\n"
+#~ "    If the -t option is supplied the full pathname to which each NAME\n"
+#~ "    corresponds is printed.  If multiple NAME arguments are supplied "
+#~ "with\n"
+#~ "    -t, the NAME is printed before the hashed full pathname.  The -l "
+#~ "option\n"
+#~ "    causes output to be displayed in a format that may be reused as "
+#~ "input.\n"
+#~ "    If no arguments are given, information about remembered commands is "
+#~ "displayed."
+#~ msgstr ""
+#~ "Pour chaque NAME, le chemin complet de la commande est déterminé puis "
+#~ "mémorisé.\n"
+#~ "    Si l'option « -p » est fournie, le CHEMIN est utilisé comme chemin "
+#~ "complet\n"
+#~ "    pour NAME, et aucune recherche n'est effectuée. L'option « -r » "
+#~ "demande au shell\n"
+#~ "    d'oublier tous les chemins mémorisés. L'option « -d » demande au "
+#~ "shell d'oublier\n"
+#~ "    les chemins mémorisés pour le NAME. Si l'option « -t » est fournie, "
+#~ "le chemin\n"
+#~ "    complet auquel correspond chaque NAME est affiché. Si plusieurs NAME "
+#~ "sont fournis\n"
+#~ "    à l'option « -t », le NAME est affiché avant chemin complet haché. "
+#~ "L'option\n"
+#~ "    « -l » permet d'utiliser un format de sortie qui peut être réutilisé "
+#~ "comme entrée.\n"
+#~ "    Si aucun argument n'est donné, des informations sur les commandes "
+#~ "mémorisées sont\n"
+#~ "    affichées."
+
+#~ msgid ""
+#~ "Display helpful information about builtin commands.  If PATTERN is\n"
+#~ "    specified, gives detailed help on all commands matching PATTERN,\n"
+#~ "    otherwise a list of the builtins is printed.  The -s option\n"
+#~ "    restricts the output for each builtin command matching PATTERN to\n"
+#~ "    a short usage synopsis."
+#~ msgstr ""
+#~ "Affiche des informations utiles sur les commandes intégrées. Si MOTIF\n"
+#~ "    est précisé, une aide détaillée sur toutes les commandes "
+#~ "correspondant\n"
+#~ "    au MOTIF sont affichées, sinon une liste des commandes intégrées est\n"
+#~ "    fournie. L'option « -s » restreint l'affichage de chaque commande\n"
+#~ "    correspondant au MOTIF à une courte description sur l'utilisation."
+
+#~ msgid ""
+#~ "By default, removes each JOBSPEC argument from the table of active jobs.\n"
+#~ "    If the -h option is given, the job is not removed from the table, but "
+#~ "is\n"
+#~ "    marked so that SIGHUP is not sent to the job if the shell receives a\n"
+#~ "    SIGHUP.  The -a option, when JOBSPEC is not supplied, means to remove "
+#~ "all\n"
+#~ "    jobs from the job table; the -r option means to remove only running "
+#~ "jobs."
+#~ msgstr ""
+#~ "Par défaut, enlève tous les arguments JOBSPEC de la table des tâches "
+#~ "actives.\n"
+#~ "    Si l'option « -h » est fournie, la tâche n'est pas retirée de la "
+#~ "table mais\n"
+#~ "    est marquée de telle sorte que le signal SIGHUP ne lui soit pas "
+#~ "envoyé quand\n"
+#~ "    le shell reçoit un SIGHUP. Lorsque JOBSPEC n'est pas fournie, "
+#~ "l'option « -a »,\n"
+#~ "    permet d'enlever toutes les tâches de la table des tâches. L'option « "
+#~ "-r »\n"
+#~ "    indique de ne retirer que les tâches en cours de fonctionnement."
+
+#~ msgid ""
+#~ "One line is read from the standard input, or from file descriptor FD if "
+#~ "the\n"
+#~ "    -u option is supplied, and the first word is assigned to the first "
+#~ "NAME,\n"
+#~ "    the second word to the second NAME, and so on, with leftover words "
+#~ "assigned\n"
+#~ "    to the last NAME.  Only the characters found in $IFS are recognized "
+#~ "as word\n"
+#~ "    delimiters.  If no NAMEs are supplied, the line read is stored in the "
+#~ "REPLY\n"
+#~ "    variable.  If the -r option is given, this signifies `raw' input, "
+#~ "and\n"
+#~ "    backslash escaping is disabled.  The -d option causes read to "
+#~ "continue\n"
+#~ "    until the first character of DELIM is read, rather than newline.  If "
+#~ "the -p\n"
+#~ "    option is supplied, the string PROMPT is output without a trailing "
+#~ "newline\n"
+#~ "    before attempting to read.  If -a is supplied, the words read are "
+#~ "assigned\n"
+#~ "    to sequential indices of ARRAY, starting at zero.  If -e is supplied "
+#~ "and\n"
+#~ "    the shell is interactive, readline is used to obtain the line.  If -n "
+#~ "is\n"
+#~ "    supplied with a non-zero NCHARS argument, read returns after NCHARS\n"
+#~ "    characters have been read.  The -s option causes input coming from a\n"
+#~ "    terminal to not be echoed.\n"
+#~ "    \n"
+#~ "    The -t option causes read to time out and return failure if a "
+#~ "complete line\n"
+#~ "    of input is not read within TIMEOUT seconds.  If the TMOUT variable "
+#~ "is set,\n"
+#~ "    its value is the default timeout.  The return code is zero, unless "
+#~ "end-of-file\n"
+#~ "    is encountered, read times out, or an invalid file descriptor is "
+#~ "supplied as\n"
+#~ "    the argument to -u."
+#~ msgstr ""
+#~ "Une ligne est lue depuis l'entrée standard ou depuis le descripteur de "
+#~ "fichier\n"
+#~ "    FD si l'option « -u » est fournie. Le premier mot est affecté au "
+#~ "premier NAME,\n"
+#~ "    le second mot au second NAME, et ainsi de suite, les mots restants "
+#~ "étant affectés\n"
+#~ "    au dernier NAME. Seuls les caractères situés dans « $IFS » sont "
+#~ "reconnus comme\n"
+#~ "    étant des délimiteurs de mots. Si aucun NAME n'est fourni, la ligne "
+#~ "est conservée\n"
+#~ "    dans la variable REPLY. L'option « -r » signifie « entrée brute » et "
+#~ "la neutralisation \n"
+#~ "    par barre oblique inverse est désactivée. L'option « -d » indique de "
+#~ "continuer\"    la lecture jusqu'à ce que le premier caractère de DELIM "
+#~ "soit lu plutôt que\n"
+#~ "    le retour à la ligne. Si « -p » est fourni, la chaîne PROMPT est "
+#~ "affichée\n"
+#~ "    sans retour à la ligne final avant la tentative de lecture. Si « -a » "
+#~ "est fourni,\n"
+#~ "    les mots lus sont affectés en séquence aux indices du TABLEAU, en "
+#~ "commençant\n"
+#~ "    à zéro. Si « -e » est fourni et que le shell est interactif, « "
+#~ "readline » est\n"
+#~ "    utilisé pour obtenir la ligne. Si « -n » est fourni avec un argument "
+#~ "NCHARS non nul,\n"
+#~ "    « read » se termine après que NCHARS caractères ont été lus. L'option "
+#~ "« -s »\n"
+#~ "    permet aux données venant d'un terminal de ne pas être répétées.\n"
+#~ "    \n"
+#~ "    L'option « -t » permet à « read » de se terminer avec une erreur si "
+#~ "une ligne\n"
+#~ "    entière de données ne lui a pas été fournie avant le DÉLAI "
+#~ "d'expiration. Si la\n"
+#~ "    variable TMOUT est définie, sa valeur est le délai d'expiration par "
+#~ "défaut. Le code\n"
+#~ "    de retour est zéro à moins qu'une fin de fichier ne soit rencontrée, "
+#~ "que « read »\n"
+#~ "    atteigne le délai d'expiration ou qu'un descripteur de fichier "
+#~ "incorrect ne soit\n"
+#~ "    fourni pour l'argument « -u »."
+
+#~ msgid ""
+#~ "Causes a function to exit with the return value specified by N.  If N\n"
+#~ "    is omitted, the return status is that of the last command."
+#~ msgstr ""
+#~ "Permet à une fonction de se terminer avec le code de retour spécifié par "
+#~ "N.\n"
+#~ "    Si N est omis, le code de retour est celui de la dernière commande."
+
+#~ msgid ""
+#~ "For each NAME, remove the corresponding variable or function.  Given\n"
+#~ "    the `-v', unset will only act on variables.  Given the `-f' flag,\n"
+#~ "    unset will only act on functions.  With neither flag, unset first\n"
+#~ "    tries to unset a variable, and if that fails, then tries to unset a\n"
+#~ "    function.  Some variables cannot be unset; also see readonly."
+#~ msgstr ""
+#~ "Pour chaque NAME, supprime la variable ou la fonction correspondante.\n"
+#~ "    En spécifiant « -v », « unset » agira seulement sur les variables.\n"
+#~ "    Avec l'option « -f », « unset » n'agit que sur les fonctions. Sans "
+#~ "option,\n"
+#~ "    « unset » essaye d'abord de supprimer une variable et, s'il échoue, "
+#~ "essaye\n"
+#~ "    de supprimer une fonction. Certaines variables ne peuvent pas être "
+#~ "supprimées.\n"
+#~ "    Consultez aussi « readonly ».    "
+
+#~ msgid ""
+#~ "NAMEs are marked for automatic export to the environment of\n"
+#~ "    subsequently executed commands.  If the -f option is given,\n"
+#~ "    the NAMEs refer to functions.  If no NAMEs are given, or if `-p'\n"
+#~ "    is given, a list of all names that are exported in this shell is\n"
+#~ "    printed.  An argument of `-n' says to remove the export property\n"
+#~ "    from subsequent NAMEs.  An argument of `--' disables further option\n"
+#~ "    processing."
+#~ msgstr ""
+#~ "Les NAME sont marqués pour export automatique vers l'environnement des\n"
+#~ "    prochaines commandes exécutées. si l'option « -f » est donnée, les "
+#~ "NAME\n"
+#~ "    se rapportent à des fonctions. Si aucun NAME n'est donné ou si « -p "
+#~ "»\n"
+#~ "    est fourni, la liste de tous les NAME exportés dans ce shell "
+#~ "s'affiche.\n"
+#~ "    L'argument « -n » permet de supprimer la propriété d'export des NAME "
+#~ "qui\n"
+#~ "    suivent. L'argument « -- » désactive le traitement des options "
+#~ "suivantes."
+
+#~ msgid ""
+#~ "The given NAMEs are marked readonly and the values of these NAMEs may\n"
+#~ "    not be changed by subsequent assignment.  If the -f option is given,\n"
+#~ "    then functions corresponding to the NAMEs are so marked.  If no\n"
+#~ "    arguments are given, or if `-p' is given, a list of all readonly "
+#~ "names\n"
+#~ "    is printed.  The `-a' option means to treat each NAME as\n"
+#~ "    an array variable.  An argument of `--' disables further option\n"
+#~ "    processing."
+#~ msgstr ""
+#~ "Les NAME donnés sont marqués pour lecture seule et les valeurs de ces "
+#~ "NAME\n"
+#~ "    ne peuvent plus être changés par affection. Si l'option « -f » est "
+#~ "donnée,\n"
+#~ "    les fonctions correspondant aux NAME sont marquées de la sorte. Si "
+#~ "aucun\n"
+#~ "    argument n'est donné ou si « -p » est fourni, la liste de tous les "
+#~ "noms\n"
+#~ "    en lecture seule est affichée. L'option « -a » indique de traiter "
+#~ "tous les\n"
+#~ "    NAME comme des variables tableaux. L'argument « -- » désactive le "
+#~ "traitement\n"
+#~ "    des option suivantes."
+
+#~ msgid ""
+#~ "The positional parameters from $N+1 ... are renamed to $1 ...  If N is\n"
+#~ "    not given, it is assumed to be 1."
+#~ msgstr ""
+#~ "Les paramètres de position depuis $N+1 ... sont renommés en $1 ...\n"
+#~ "    Si N n'est pas fourni, il est supposé égal à 1."
+
+#~ msgid ""
+#~ "Suspend the execution of this shell until it receives a SIGCONT\n"
+#~ "    signal.  The `-f' if specified says not to complain about this\n"
+#~ "    being a login shell if it is; just suspend anyway."
+#~ msgstr ""
+#~ "Suspend l'exécution de ce shell jusqu'à ce qu'il reçoive le signal "
+#~ "SIGCONT.\n"
+#~ "    Si « -f » est spécifié, il indique de ne pas se plaindre s'il s'agit "
+#~ "d'un \n"
+#~ "    shell de connexion, mais de suspendre quand-même."
+
+#~ msgid ""
+#~ "Print the accumulated user and system times for processes run from\n"
+#~ "    the shell."
+#~ msgstr ""
+#~ "Affiche les temps utilisateur et système accumulés pour les processus\n"
+#~ "    lancés depuis le shell."
+
+#~ msgid ""
+#~ "For each NAME, indicate how it would be interpreted if used as a\n"
+#~ "    command name.\n"
+#~ "    \n"
+#~ "    If the -t option is used, `type' outputs a single word which is one "
+#~ "of\n"
+#~ "    `alias', `keyword', `function', `builtin', `file' or `', if NAME is "
+#~ "an\n"
+#~ "    alias, shell reserved word, shell function, shell builtin, disk "
+#~ "file,\n"
+#~ "    or unfound, respectively.\n"
+#~ "    \n"
+#~ "    If the -p flag is used, `type' either returns the name of the disk\n"
+#~ "    file that would be executed, or nothing if `type -t NAME' would not\n"
+#~ "    return `file'.\n"
+#~ "    \n"
+#~ "    If the -a flag is used, `type' displays all of the places that "
+#~ "contain\n"
+#~ "    an executable named `file'.  This includes aliases, builtins, and\n"
+#~ "    functions, if and only if the -p flag is not also used.\n"
+#~ "    \n"
+#~ "    The -f flag suppresses shell function lookup.\n"
+#~ "    \n"
+#~ "    The -P flag forces a PATH search for each NAME, even if it is an "
+#~ "alias,\n"
+#~ "    builtin, or function, and returns the name of the disk file that "
+#~ "would\n"
+#~ "    be executed."
+#~ msgstr ""
+#~ "Indique comment chaque NAME serait interprété s'il était utilisé comme "
+#~ "un\n"
+#~ "    nom de commande.\n"
+#~ "    \n"
+#~ "    Si l'option « -t » est utilisée, « type » affiche un simple mot "
+#~ "parmi\n"
+#~ "    « alias », « keyword », « function », « builtin », « file » ou « », "
+#~ "si\n"
+#~ "    NAME est respectivement un alias, un mot réservé du shell, une "
+#~ "fonction\n"
+#~ "    du shell, une primitive, un fichier du disque, ou s'il est inconnu.\n"
+#~ "    \n"
+#~ "    Si l'indicateur « -p » est utilisé, « type » renvoie soit le nom du "
+#~ "fichier\n"
+#~ "    du disque qui serait exécuté, soit rien si « type -t NAME » ne "
+#~ "retourne pas\n"
+#~ "    « file ».\n"
+#~ "    \n"
+#~ "    Si « -a » est utilisé, « type » affiche tous les emplacements qui "
+#~ "contiennent\n"
+#~ "    un exécutable nommé « file ». Ceci inclut les alias, les primitives "
+#~ "et les\n"
+#~ "    fonctions si, et seulement si « -p » n'est pas également utilisé.\n"
+#~ "    \n"
+#~ "    L'indicateur « -P » force une recherche dans PATH pour chaque NAME "
+#~ "même\n"
+#~ "    si c'est un alias, une primitive ou une fonction et renvoie le nom "
+#~ "du\n"
+#~ "    fichier du disque qui serait exécuté."
+
+#~ msgid ""
+#~ "The user file-creation mask is set to MODE.  If MODE is omitted, or if\n"
+#~ "    `-S' is supplied, the current value of the mask is printed.  The `-"
+#~ "S'\n"
+#~ "    option makes the output symbolic; otherwise an octal number is "
+#~ "output.\n"
+#~ "    If `-p' is supplied, and MODE is omitted, the output is in a form\n"
+#~ "    that may be used as input.  If MODE begins with a digit, it is\n"
+#~ "    interpreted as an octal number, otherwise it is a symbolic mode "
+#~ "string\n"
+#~ "    like that accepted by chmod(1)."
+#~ msgstr ""
+#~ "Le masque de création des fichiers utilisateurs est réglé à MODE. Si "
+#~ "MODE\n"
+#~ "    est omis ou si « -S » est fourni, la valeur actuelle du masque est "
+#~ "affichée\n"
+#~ "    L'option « -S » rend la sortie symbolique, sinon une valeur octale "
+#~ "est\n"
+#~ "    est utilisée. Si « -p » est fourni et que MODE est omis, la sortie se "
+#~ "fait\n"
+#~ "    dans un format qui peut être réutilisé comme entrée. Si MODE commence "
+#~ "par\n"
+#~ "    un chiffre, il est interprété comme un nombre octal, sinon comme une "
+#~ "chaîne\n"
+#~ "    symbolique de mode comme celle utilisée par « chmod(1) »."
+
+#~ msgid ""
+#~ "Wait for the specified process and report its termination status.  If\n"
+#~ "    N is not given, all currently active child processes are waited for,\n"
+#~ "    and the return code is zero.  N is a process ID; if it is not given,\n"
+#~ "    all child processes of the shell are waited for."
+#~ msgstr ""
+#~ "Attend le processus spécifié et donne son code de retour. Si N n'est\n"
+#~ "    pas donné, tous les processus fils actuellement actifs sont attendus\n"
+#~ "    et le code de retour est zéro. N est un n° de processus. S'il n'est\n"
+#~ "    pas fourni, tous les processus du shell sont attendus."
+
+#~ msgid ""
+#~ "Create a simple command invoked by NAME which runs COMMANDS.\n"
+#~ "    Arguments on the command line along with NAME are passed to the\n"
+#~ "    function as $0 .. $n."
+#~ msgstr ""
+#~ "Crée une simple commande invoquée avec NAME, et qui lance les\n"
+#~ "    commandes COMMANDS. Les arguments fournis avec NAME sur la\n"
+#~ "    ligne de commande sont transmis à la fonction en tant que $0 .. $n."
+
+#~ msgid ""
+#~ "Toggle the values of variables controlling optional behavior.\n"
+#~ "    The -s flag means to enable (set) each OPTNAME; the -u flag\n"
+#~ "    unsets each OPTNAME.  The -q flag suppresses output; the exit\n"
+#~ "    status indicates whether each OPTNAME is set or unset.  The -o\n"
+#~ "    option restricts the OPTNAMEs to those defined for use with\n"
+#~ "    `set -o'.  With no options, or with the -p option, a list of all\n"
+#~ "    settable options is displayed, with an indication of whether or\n"
+#~ "    not each is set."
+#~ msgstr ""
+#~ "Commute la valeur des variables qui contrôlent les comportements "
+#~ "optionnels.\n"
+#~ "    L'option « -s » indique d'activer chaque option nommée OPTNAME. "
+#~ "L'option\n"
+#~ "    « -u » désactive l'option OPTNAME. L'option « -q » rend la sortie "
+#~ "silencieuse.\n"
+#~ "    Le code de retour indique si chaque OPTNAME est activée ou "
+#~ "désactivée.\n"
+#~ "    L'option « -o » restreint les options OPTNAME à celles qui peuvent "
+#~ "être utilisées avec\n"
+#~ "    « set -o ». Sans option ou avec l'option « -p », une liste de toutes "
+#~ "les\n"
+#~ "    options modifiables est affichée, avec une indication sur l'état de "
+#~ "chacune."
+
+#~ msgid ""
+#~ "For each NAME, specify how arguments are to be completed.\n"
+#~ "    If the -p option is supplied, or if no options are supplied, "
+#~ "existing\n"
+#~ "    completion specifications are printed in a way that allows them to "
+#~ "be\n"
+#~ "    reused as input.  The -r option removes a completion specification "
+#~ "for\n"
+#~ "    each NAME, or, if no NAMEs are supplied, all completion "
+#~ "specifications."
+#~ msgstr ""
+#~ "Pour chaque NAME, spécifie comment les arguments doivent être complétés.\n"
+#~ "    Si l'option « -p » est fournie ou si aucune option n'est fournie, les "
+#~ "spécifications\n"
+#~ "    de complètement actuelles sont affichées de manière à pouvoir être "
+#~ "réutilisées\n"
+#~ "    comme entrée. L'option « -r » enlève la spécification de complètement "
+#~ "pour chaque\n"
+#~ "    NAME ou, si aucun NAME n'est fourni, toutes les spécifications de "
+#~ "complètement."
diff --git a/po/ga.gmo b/po/ga.gmo
new file mode 100644
index 0000000..70423c3
--- /dev/null
+++ b/po/ga.gmo
diff --git a/po/ga.po b/po/ga.po
new file mode 100644
index 0000000..36f1b27
--- /dev/null
+++ b/po/ga.po
@@ -0,0 +1,5393 @@
+# translation of bash.po to Irish
+# Copyright (C) 2017 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+#
+# Séamus Ó Ciardhuáin <sociardhuain@gmail.com>, 2009, 2017, 2018, 2019.
+msgid ""
+msgstr ""
+"Project-Id-Version: bash 5.0\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2019-01-16 21:05+0000\n"
+"Last-Translator: Séamus Ó Ciardhuáin <sociardhuain@gmail.com>\n"
+"Language-Team: Irish <gaeilge-gnulinux@lists.sourceforge.net>\n"
+"Language: ga\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"X-Generator: Lokalize 2.0\n"
+"Plural-Forms: nplurals=5; plural=n==1 ? 0 : n==2 ? 1 : (n>2 && n<7) ? 2 :"
+"(n>6 && n<11) ? 3 : 4;\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "droch-fhoscript eagair"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr "%s: aitreabúid nameref (tagairt athróga) á baint"
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr ""
+"%s: ní féidir eagar innéacsaithe a thiontú go heagar comhthiomsaitheach"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: eochair neamhbhailí eagair chomhthiomsaithigh"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: ní féidir sannadh go hinnéacs neamhuimhriúil."
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr ""
+"%s: %s: caithfear foscript a úsáid le sannadh chuig eagar comhthiomsaitheach"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: ní féidir cruthú: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr ""
+"bash_execute_unix_command: ní féidir mapa eochrach an ordaithe a aimsiú"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: ní \" an chéad charachtar nach spás bán é."
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "Níl '%c' dúnta i %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: deighilteoir idirstaid ar iarraidh"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "'%s': ní féidir dícheangail"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr "fairsingiú lúibíní: ní féidir cuimhne a leithdháileadh le haghaidh %s"
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr ""
+"fairsingiú lúibíní: theip ar leithdháileadh cuimhne le haghaidh %u eilimint"
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr "fairsingiú lúibíní: theip ar leithdháileadh cuimhne le haghaidh '%s'"
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "'%s': ainm neamhbhailí ar mhapa eochrach"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "níl eagarthóireacht líne cumasaithe"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "'%s': ainm neamhbhailí ar mhapa eochrach "
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: ní féidir léamh: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "'%s': ainm feidhme neamhaithnid"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "Níl %s ceangailte le heochair ar bith.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "Is féidir %s a ghlaoigh trí "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "'%s': ní féidir dícheangail"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "comhaireamh lúibe"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "Gan chiall ach i lúb 'for', 'while' nó 'until'"
+
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Aischuir comhthéacs an ghlaoigh reatha fhoghnáthaimh.\n"
+"    \n"
+"    Gan SLONN, aischuirtear '$líne $ainm_comhaid'. Le SLONN, aischuirtear\n"
+"    '$líne $foghnáthamh $ainm_comhaid'; is féidir lorg cruaiche a sholáthar "
+"leis an\n"
+"    fhaisnéis bhreise seo.\n"
+"    \n"
+"    Taispeánann an luach atá ag SLONN líon na bhfrámaí glaoigh le dul siar\n"
+"    roimh an ceann reatha; fráma 0 an ceann atá ar barr.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear 0 ach sa chás nach bhfuil an bhlaosc ag rith feidhme "
+"blaoisce, nó\n"
+"    sa chás go bhfuil SLONN neamhbhailí."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "Níl HOME socruithe"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "An iomarca argóintí"
+
+#: builtins/cd.def:342
+msgid "null directory"
+msgstr "comhadlann neamhnitheach"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "Níl OLDPWD socruithe"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "líne %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "rabhadh: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: úsáid: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: tá argóint riachtanach don rogha"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: argóint uimhriúil de dhíth"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: gan aimsiú"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: rogha neamhbhailí"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: ainm neamhbhailí rogha"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "'%s': ní aitheantóir bailí é"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "uimhir ochtnártha neamhbhailí"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "uimhir heicsidheachúlach neamhbhailí"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "uimhir neamhbhailí"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: sonrú neamhbhailí comhartha"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "'%s': ní aitheantas próisis nó sonrú taisc bailí é"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: athróg inléite amháin"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s as raon"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "argóint"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s as raon"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: níl a léithéid de tasc ann."
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: gan rialú tascanna."
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "Gan rialú tascanna."
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: srianta"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "srianta"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: ní ordú ionsuite blaoisce é."
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "earráid scríofa: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "earráid agus airíonna teirminéil á socrú: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "earráid agus airíonna teirminéil á fáil: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: earráid ag fáil na comhadlainne reatha: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: sonrú taisc athbhríoch"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr "Níl cabhair ar fáil sa leagan seo."
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: ní féidir díshocrú: %s inléite amháin"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: ní féidir díshocrú"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: ainm neamhbhailí gnímh"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: níl sonrú iomlánaithe ann."
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr ""
+"Rabhadh: b'fhéidir nach n-oibríonn an rogha -F mar a bheifeá ag súil leis."
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr ""
+"Rabhadh: b'fhéidir nach n-oibríonn an rogha -C mar a bheifeá ag súil leis."
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "níl an fheidhm chomhlánaithe á rith faoi láthair"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "Inúsáidte i bhfeidhmeanna amháin. "
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr "%s: ní féidir le athróg thagartha bheith ina h-eagar"
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr ""
+"%s: ní cheadaítear tagairtí don athróg féin i nameref (tagairt athróga)"
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s: tagairt ainm ciorclach"
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "'%s': ainm neamhbhailí athróige le haghaidh tagairt ainm"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "Ní féidir '-f' a úsáid chun feidhmeanna a dhéanamh"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: feidhm inléite amháin"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr "%s: cáintear sannadh na gcomheagar athfhriotail"
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: ní féidir athróga eagair a scrios mar seo."
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr ""
+"%s: ní féidir eagar comhthiomsaitheach a thiontú go heagar innéacsaithe"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "Níl luchtú dinimiciúil ar fáil"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "Ní féidir an réad comhroinnte %s a oscailt: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "Ní féidir %s a aimsiú sa réad comhroinnte %s: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: níl sé luchtaithe go dinimiciúil"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr ""
+"Theip ar an ngníomh luchtála le haghaidh %s (aiscuireadh %d): níor "
+"luchtáladh é"
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: níl sé luchtaithe go dinimiciúil"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: ní féidir scrios: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: is comhadlann é"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: ní gnáthchomhad é"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: tá an comhad ró-mhór"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: ní féidir comhad dénártha a rith"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: ní féidir rith: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "logout\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "Ní blaosc logála isteach é seo: úsáid 'exit'"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Tá tascanna stoptha ann.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Tá tascanna ag rith.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "Níor aimsíodh ordú"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "Sonrú staire"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: ní féidir comhad sealadach a oscailt: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "reatha"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "Tosaíodh tasc %d gan rialú tascanna."
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: rogha neamhdhleathach -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: tá argóint riachtanach don rogha -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "Tá haiseáil díchumasaithe."
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: tá an tábla haiseála folamh.\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "amais\tordú\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Ordaithe blaoisce a mheaitseálann an lorgfhocal '"
+msgstr[1] "Ordaithe blaoisce a mheaitseálann na lorgfhocail '"
+msgstr[2] "Ordaithe blaoisce a mheaitseálann na lorgfhocail '"
+msgstr[3] "Ordaithe blaoisce a mheaitseálann na lorgfhocail '"
+msgstr[4] "Ordaithe blaoisce a mheaitseálann na lorgfhocail '"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"Ní mheaitseálann ábhar cabhrach ar bith \"%s\". Bain triail as \"help help\" "
+"nó \"man -k %s\" nó \"info %s\"."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: ní féidir oscailt: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Tá na horduithe blaoisce seo sainmhínithe go hinmheánach.\n"
+"Usáid \"help\" leis an liosta seo a thaispeáint.\n"
+"Úsáid \"help ainm\" chun tuilleadh eolais a fháil faoin bhfeidhm \"ainm\".\n"
+"Úsáid \"info bash\" chun tuilleadh eolais a fháil faoin mblaosc féin.\n"
+"Úsáid \"man -k\" nó \"info\" chun tuilleadh eolais a fháil faoi ordaithe "
+"nach bhfuil sa liosta seo.\n"
+"Ciallaíonn réalt (*) ar ainm go bhfuil an t-ordú díchumasaithe.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "Ní féidir níos mó ná ceann amháin as -anrw a úsáid."
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "suíomh staire"
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: stampa ama neamhbhailí"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: theip ar fhairsingiú staire."
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: theip ar inlib"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "Níl roghanna eile ceadaithe le '-x'"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: is gá le argóintí bheith ina aitheantais phróisis nó taisc"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Earráid neamhaithnid"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "Ag súil le slonn"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: ní eagar innéacsaithe é"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: sonrú neamhbhailí tuairisceora comhaid"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: tuairisceoir comhaid neamhbhailí: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: comhaireamh neamhbhailí línte"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: bunphointe neamhbhailí eagair"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: candam neamhbhailí aisghlaoigh"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "ainm folamh athróga eagair"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "tacaíocht le hathróga eagair de dhíth"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "'%s': carachtar formáide ar iarraidh."
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "'%c': sonrú neamhbhailí formáide ama"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "'%c': carachtar formáide neamhbhailí."
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "rabhadh: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "fadhb i bpársáil formáide: %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "digit heicsidheachúlach ar iarraidh le haghaidh \\x"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "digit Unicode ar iarraidh le haghaidh \\%c"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "Níl comhadlann eile ann"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s: argóint neamhbhailí"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<níl comhadlann reatha ann>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "cruach chomhadlainne fholamh"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "innéacs chruach na gcomhadlann"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Taispeáin liosta na gcomhadlann a bhfuil cuimhne orthu faoi láthair.\n"
+"    Cuirtear comhadlanna ar an liosta leis an ordú \"pushd\". Is féidir dul\n"
+"    siar trín liosta leis an ordú \"popd\".\n"
+"    \n"
+"    Roghanna:\n"
+"      -c\tglantar cruach na gcomhadlann trí gach mhír a bhaint de\n"
+"      -l\tná priontáiltear na comhadlanna i gcoibhneas le do chomhadlann "
+"bhaile\n"
+"      \tagus le tilde rompu\n"
+"      -p\tpriontáiltear cruach na gcomhadlann, mír amháin ar gach líne\n"
+"      -v\tpriontáiltear cruach na gcomhadlann, mír amháin ar gach líne agus\n"
+"      \ta háit sa chruach roimpi\n"
+"    \n"
+"    Argóintí:\n"
+"      +N\tTaispeántar mír N, agus uimhrithe curtha ar na míreanna ó thaobh "
+"clé\n"
+"      \tan liosta a thaispeántar le \"dirs\" rite gan argóintí, ag tosú ó "
+"náid.      -N\tTaispeántar mír N, agus uimhrithe curtha ar na míreanna ó "
+"thaobh deas\n"
+"      \tan liosta a thaispeántar le \"dirs\" rite gan argóintí, ag tosú ó "
+"náid."
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Cuireann \"pushd\" comhadlann ar bharr na cruaiche comhadlanna, nó "
+"rothlaíonn\n"
+"    sé an chruach, ag cur barr nua na cruaiche mar an chomhadlann oibrithe\n"
+"    reatha. Gan argóintí, malartaítear an dá chomhadlann ar bharr.\n"
+"    \n"
+"    Roghanna:\n"
+"    -n\tNá déantar an gnáthathrú comhadlainne agus comhadlanna á gcur\n"
+"    \tleis an gcruach; ní athraítear ach an chruach.\n"
+"    \n"
+"    Argóintí:\n"
+"      +N\tRothlaítear an chruach sa chaoi go mbeidh an Nú chomhadlann (ag\n"
+"    \tcomhaireamh ó thaobh clé an liosta a thaispeánann \"dirs\" agus ag "
+"tosú\n"
+"    \tó náid) ar bharr.\n"
+"    \n"
+"      -N\tRothlaítear an chruach sa chaoi go mbeidh an Nú chomhadlann (ag\n"
+"    \tcomhaireamh ó thaobh deas an liosta a thaispeánann 'dirs' agus ag "
+"tosú\n"
+"    \tó náid) ar bharr.\n"
+"    \n"
+"      COMHADLANN\tCuirtear COMHADLANN ar bharr na cruaiche, agus socraítear\n"
+"      \tí mar an chomhadlann oibrithe reatha.\n"
+"    \n"
+"    Taispeánann an t-ordú ionsuite \"dirs\" cruach na gcomhadlann."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Baineann \"popd\" comhadlanna ón gcruach comhadlanna. Gan argóintí, baintear "
+"an\n"
+"    chomhadlann ó bharr na cruaiche, agus téann sé go dtí an chomhadlann\n"
+"    atá ar bharr.\n"
+"    \n"
+"    Roghanna:\n"
+"    -n\tNá déantar an gnáthathrú comhadlainne agus comhadlanna á gcur\n"
+"    \tleis an gcruach; ní athraítear ach an chruach.\n"
+"    \n"
+"    Argóintí:\n"
+"      +N\tBaintear an Nú chomhadlann ag comhaireamh ó thaobh clé an liosta\n"
+"    \ta thaispeánann \"dirs\" agus ag tosú ó náid. Mar shampla, baineann\n"
+"    \t\"popd +0\" an chéad chomhadlann, agus \"popd +1\" an dara cheann.\n"
+"    \n"
+"      -N\tBaintear an Nú chomhadlann ag comhaireamh ó thaobh deas an liosta\n"
+"    \ta thaispeánann 'dirs' agus ag tosú ó náid. Mar shampla, baineann\n"
+"    \t\"popd -0\" an chomhadlann dheireanach, agus \"popd -1\" an ceann\n"
+"    \tleathdheireanach.\n"
+"    \n"
+"    Taispeánann an t-ordú ionsuite \"dirs\" cruach na gcomhadlann."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: sonrú neamhbhailí teorann ama"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "Earráid léite: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr ""
+"Ní féidir \"return\" a dhéanamh ach ó fheidhm nó ó script rite le \"source\""
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "Ní féidir feidhm agus athróg a dhíshocrú ag an am céanna."
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: ní athróg eagair é"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: ní feidhm é."
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr "%s: ní féidir easpórtáil"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "comhaireamh iomlaoide"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "Ní féidir roghanna blaoisce a shocrú agus a dhíshocrú ag an am céanna."
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: ainm neamhbhailí ar rogha blaoisce"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "Is gá don argóint bheith ina ainm comhaid."
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: níor aimsíodh an comhad"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "Ní féidir cur ar fionraí."
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "Ní féidir blaosc logála isteach a chur ar fionraí."
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "Tá %s ailiasáilte go '%s'.\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "Is eochairfhocal blaoisce é %s.\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "Is feidhm é %s.\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "Is ordú ionsuite blaoisce speisialta é %s\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "Is ordú ionsuite blaoisce é %s\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "Tá %s %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "Tá %s haiseáilte (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: argóint teorann neamhbhailí"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "'%c': droch-ordú"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: ní féidir teorainn a fháil: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "teorainn"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: ní féidir teorainn a athrú: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "uimhir ochtnártha"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "'%c': oibreoir neamhbhailí móid shiombalaigh"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "'%c': carachtar neamhbhailí móid shiombalaigh"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " líne "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "Ordú deireanach: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Ag tobscor..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr "EOLAS: "
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "earráid ordaithe neamhaithnid"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "droch-chineál ordaithe"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "drochnascóir"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "drochléim"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: athróg neamhcheangailte"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\aImithe thar am ag feitheamh le hionchur: logáil amach uathoibríoch\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "Ní féidir an ionchur caighdeánach a atreorú ó /dev/null: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "FORM�ID_AMA: '%c': carachtar formáide neamhbhaií."
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr "execute_coproc: tá an comhphróiseas [%d:%s] fós ann"
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "earráid phíopa"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr "eval: imithe thar uasleibhéal neadaithe eval (%d)"
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr "%s: imithe thar uasleibhéal neadaithe foinse (%d)"
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr "%s: imithe thar uasleibhéal neadaithe feidhme (%d)"
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: srianta: ní féidir \"/\" a shonrú in ainmneacha ordaithe"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: níor aimsíodh an t-ordú"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: drochléirmhínitheoir"
+
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: ní féidir comhad dénártha a rith: %s"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "Is ordú ionsuite speisialta é '%s'"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr ""
+"Ní féidir an tuairisceoir comhaid %d a dhúbailt mar thuairisceoir comhaid %d."
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "Imithe thar leibhéal athchursála sloinn"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "Gannsreabhadh na cruaiche athchúrsála"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "Earráid chomhréire sa slonn."
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "Deineadh iarracht sannadh go rud nach athróg é."
+
+#: expr.c:530
+msgid "syntax error in variable assignment"
+msgstr "Earráid chomhréire i sannadh athróige."
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "Roinnt ar 0"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "Fabht: droch-chomhartha expassign"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "Bhíothas ag súil le \":\" le haghaidh sloinn choinníollaigh."
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "Easpónant níos lú ná 0."
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "Ag súil le aitheantóir tar éis réamhincriminte nó réamhdeicriminte"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "\")\" ar iarraidh"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "Earráid chomhréire: bhíothas ag súil le hoibreann."
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "Earráid chomhréire: oibreoir neamhbhailí uimhríochta"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (comhartha earráide '%s')"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "Bonnuimhir uimhríochtúil neamhbhailí."
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: comhaireamh neamhbhailí línte"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "Tá an luach rómhór don bhonnuimhir."
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: earráid sloinn\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: ní féidir na máthairchomhadlanna a rochtain."
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr ""
+"Ní féidir an mód gan mhoill a athshocrú le haghaidh an tuairisceora chomhaid "
+"%d"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr ""
+"Ní féidir tuairisceoir comhaid nua a leithdháileadh le haghaidh ionchur bash "
+"ón tuairisceoir comhaid %d."
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr ""
+"save_bash_input: tá an maolán ann cheana le haghaidh an tuairisceoir comhaid "
+"nua %d"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: pgrp píopa"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "Tá aitheantas an phróisis ghabhlaithe %d sa tasc %d atá ag rith"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "Tá an tasc stoptha %d leis an ngrúpa próisis %ld á scrios."
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process: próiseas %5ld (%s) marcáilte mar fós beo"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: níl an aitheantóir próisis sin ann."
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Comhartha %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Déanta"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Stoptha"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Stoptha(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "Ag Rith"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Déanta(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Scoir %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Stádas neamhaithnid"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(cuimhne dumpáilte)"
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (comhadlann oibre: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "setpgid macphróisis (%ld go %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: níl an próiseas %ld ina mhacphróiseas den bhlaosc seo."
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: níl taifead den phróiseas %ld"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: tá an tasc %d stoptha."
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: níl a léithéid de tasc ann."
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: tá an tasc críochnaithe."
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: tá an tasc %d sa chúlra cheana."
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr "waitchld: ag cumasú WNOHANG chun stad éiginnte a sheachaint"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: líne %d: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (cuimhne dumpáilte)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(comhadlann oibre anois: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: theip ar getpgrp"
+
+#: jobs.c:4447
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: níl rialú jabanna ar fáil sa chúlra"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: araíonacht líne"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "ní féidir an grúpa próisis teirminéil a athrú (%d)"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "Níl rialú tascanna sa bhlaosc seo."
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: dearbhú teipthe: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d: dearbhú ina phraiseach\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "neamhaithnid"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: bloc ar an liosta saor scriosta"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: glaoite le argóint bhloic á saoradh cheana"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: glaoite le argóint bhloic nár leithdháileadh"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: gannsreabhadh; tá mh_nbytes as raon"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: gannsreabhadh; tá mh_nbytes as raon"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: ní ionann méid na smután túis agus deiridh"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: glaoite le argóint bhloic nár leithdháileadh"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc: gannsreabhadh; tá mh_nbytes as raon"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc: gannsreabhadh; tá mh_nbytes as raon"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: ní ionann méideanna na smután túis agus deiridh"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: an bhfuil an tábla leithdháilte lán le FIND_ALLOC?\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr ""
+"register_alloc: an bhfuil %p sa tábla mar atá sé leithdháilte cheana?\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: an bhfuil %p sa tábla cheana mar ceann saor?\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "Bonn neamhbhailí"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: óstríomhaire neamhaithnid"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: seirbhís neamhbhailí"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: drochshonrú conaire líonra"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "Ní thacaítear le oibríochtaí líonra."
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: ní féidir an logchaighdeán a athrú (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: ní féidir an logchaighdeán a athrú (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: ní féidir an logchaighdeán a athrú (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: ní féidir an logchaighdeán a athrú (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "Tá ríomhphost agat i $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "Tá ríomhphost nua agat i $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "Tá an ríomhphost i %s léite\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "Earráid chomhréire: tá slonn uimhríochtúil de dhith."
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "Earráid chomhréire: ';' gan súil leis."
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "Earráid chomhréire: '((%s))'"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: drochchineál ordaithe %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr ""
+"Cáipéis leabaithe ag líne %d teormharcáilte le deireadh comhaid (\"%s\" á "
+"lorg)"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr "make_redirection: ordú atreoraithe \"%d\" as raon."
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+"shell_getc: tá méid an líne ionchuir blaoisce (%zu) níos mó ná SIZE_MAX "
+"(%lu): líne giorraithe"
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr "Imithe thar uasfhad na cáipéise-anseo"
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "Deireadh comhaid gan súil leis agus \"%c\" a mheaitseálann á lorg."
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "Deireadh comhaid gan súil leis agus \"]]\" á lorg."
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr ""
+"Earráid chomhréire i slonn coinníollach: comhartha \"%s\" gan suil leis."
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "Earráid chomhréire i slonn coinníollach."
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "Comhartha '%s' gan súil leis; ag súil le ')'."
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "Ag súil le \")\""
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "Argóint \"%s\" gan súil lei go hoibreoir aonártha coinníollach."
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "Argóint gan súil lei go hoibreoir coinníollach aonártha ."
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr ""
+"Comhartha \"%s\" gan súil leis. Bhíothas ag súil le hoibreoir coinníollach "
+"dénártha."
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "Bhíothas ag súil le hoibreoir coinníollach dénártha."
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "Argóint '%s' gan súil lei go hoibreoir dénártha coinníollach."
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "Argóint gan súil lei go hoibreoir dénártha coinníollach."
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "Comhartha '%c' gan súil leis in ordú coinníollach."
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "Comhartha \"%s\" gan súil leis in ordú coinníollach."
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "Comhartha %d gan súil leis in ordú coinníollach."
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "Earráid chomhréire in aice comhartha '%s' nach rabhthas ag súil leis."
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "Earráid chomhréire in aice '%s'"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "Earráid chomhréire: deireadh comhaid gan súil leis."
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "Earráid chomhréire"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Úsáid '%s' le scoir den mblaosc.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "Deireadh comhaid gan súil leis agus ')' á lorg le meaitseáil."
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "Iomlánú: níor aimsíodh an fheidhm '%s'."
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr "críochnú in-ríomhchláraithe: %s: d'fhéadfadh lúb atriail a bheith ann"
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: tá COMPSPEC neamhnitheach"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: drochnascóir '%d'"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: tuairisceoir comhaid neamhbhailí"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: pointeoir folamh comhaid"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != fileno xtrace fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: '%c': carachtar formáide neamhbhailí"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "tuairisceoir comhaid as raon"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: atreorú athbhríoch"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: ní féidir comhad atá ann cheana a fhorscríobh."
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: srianta: ní féidir aschur a atreorú."
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "ní féidir cáipéis shealadach a chruthú don cháipéis leabaithe: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: ní féidir tuairisceoir comhaid a shannadh go hathróg."
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "Ní thacaítear le /dev/(tcp|udp)/óstríomhaire/port gan líonrú."
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "Earráid atreoraithe: ní féidir an tuairisceoir comhaid a dhúbailt."
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "Níorbh fhéidir /tmp a aimsiú. Cruthaigh é le do thoil!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "Caithfidh /tmp bheith ina ainm comhadlainne bailí."
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr ""
+"Tabharfar neamhaird ar an mód deaphriontála i mblaoscanna idirghníomhacha."
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: rogha neamhbhailí"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr ""
+"Ní féidir an t-aitheantóir úsáideora (uid) a athrú go %d: aitheantóir "
+"éifeachtach %d"
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr ""
+"Ní féidir an t-aitheantóir grúpa (gid) a athrú go %d: aitheantóir "
+"éifeachtach %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr ""
+"Ní féidir an dífhabhtóir a thosú; tá an mód dífhabhtaithe díchumasaithe."
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr "%s: is comhadlann é"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "Níl ainm orm!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, leagan %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Úsáid:\t%s [rogha fada GNU] [rogha] ...\n"
+"\t%s [rogha fada GNU] [rogha] comhad_scripte ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "Roghanna fada GNU:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Roghanna blaoisce:\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-ilrsD nó -c ordú nó -O rogha_shopt\t\t(glaoch amháin)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s nó -o rogha\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+"Úsáid %s -c 'help set' le haghaidh tuilleadh eolais faoi roghanna blaoisce.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr ""
+"Úsáid '%s -c help' le haghaidh tuilleadh eolais faoi orduithe ionsuite "
+"blaoisce.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "Úsáid an t-ordú 'bashbug' le tuarascáil a sheoladh faoi fhabht.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr "leathanach baile bash: <http://www.gnu.org/software/bash>\n"
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr "Cabhair ghinearálta le bogearraí GNU: <http://www.gnu.org/gethelp/>\n"
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: oibríocht neamhbhailí"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Droch-chomhartha"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Crochadh"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Idirbhriseadh"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Scoir"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Treoir mídhleathach"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "Rianú/gaistiú brisphointe"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "Treoir ABORT"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "Treoir EMT"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Eisceacht snámhphointe"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Maraithe"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Earráid bhus"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Fabht deighilte"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Droch-ghlaoch córais"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Píopa briste"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Clog aláraim"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Críochnaithe"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Staid phráinneach I/A"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Stoptha (comhartha)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Lean ar aghaidh"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Bás macphróisis nó stopadh"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Stoptha (ionchur teirminéil)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Stoptha (aschur teirminéil)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "I/A ullamh"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "Teorainn LAP"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "Teorainn chomhad"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Aláram (fíorúil)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Aláram (próifíl)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Fuinneog athraithe"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Glas taifid"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Comhartha úsáideora 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Comhartha úsáideora 2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "sonraí ionchuir HFT ar feitheamh"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "teip chumhachta ar tí tarlú"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "cliseadh córais ar tí tarlú"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "bog próiseas go LAP eile"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "earráid ríomhchláraithe"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "mód monatóireachta HFT ceadaithe"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "mód monatóireachta HFT cealaithe"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "seicheamh fuaime HFT críochnaithe"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "Iarratas faisnéise"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "Comhartha neamhaithnid #%d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "Drochionadú: níl '%s' dúnta i %s"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: ní féidir liosta a shannadh go ball eagair."
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "Ní féidir píopa a dhéanamh le haghaidh ionadaíocht próisis."
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "Ní féidir macphróiseas a dhéanamh le haghaidh ionadaíocht próisis."
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "Ní féidir píopa ainmnithe %s a oscailt le haghaidh léamh."
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "Ní féidir píopa ainmnithe %s a oscailt le haghaidh scríofa."
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr ""
+"Ní féidir an píopa ainmnithe %s a dhúbailt mar thuairisceoir comhaid %d."
+
+#: subst.c:6213
+msgid "command substitution: ignored null byte in input"
+msgstr "ionadú orduithe: tugadh neamhaird ar ghiotán neamhnitheach san ionchur"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "Ní féidir píopa a dhéanamh le haghaidh ionadú ordaithe."
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "Ní féidir macphróiseas a dhéanamh le haghaidh ionadú ordaithe."
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr ""
+"command_substitute: ní feidir an píopa a dhúbailt mar thuairisceoir comhaid "
+"1."
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "'%s': ainm neamhbhailí athróige le haghaidh tagairt ainm"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: fairsingiú neamhbhailí indíreach"
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr "%s: ainm neamhbhailí athróige"
+
+#: subst.c:7256
+#, c-format
+msgid "%s: parameter not set"
+msgstr "%s: paraiméadar gan socrú."
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: paraiméadar neamhnitheach nó gan socrú."
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: slonn fotheaghráin < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: drochionadú"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: ní féidir sannadh mar seo."
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+"i leaganacha den bhlaosc amach anseo, beidh luachálú mar ionadú uimhríochta "
+"éigeantach"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "drochionadú: níl  '`' dúnta i %s"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "gan meaitseáil: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "Bhíothas ag súil le hargóint."
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: ag súil le slonn slánuimhreach."
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "Ag súil le ')'"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "Ag súil le ')', ach fuarthas %s."
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: ag súil le hoibreoir dénártha."
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: ag súil le hoibreoir aonártha."
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "']' ar iarraidh"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "Earráid chomhréire: ';' gan súil leis."
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "Uimhir chomhartha neamhbhailí"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr "eval: imithe thar uasleibhéal na láimhseálaithe gaistí (%d)"
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: drochluach sa liosta_gaistí[%d]: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps: is SIG_DFL an láimhseálaí comharthaí; %d (%s) á "
+"athsheoladh chugam féin."
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: droch-chomhartha %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "Earráid agus sainmhíniú na feidhme '%s' á iompórtáil."
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "Tá an leibhéal blaoisce (%d) ró-ard; á athshocrú go 1."
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: níl comhthéacs feidhme sa scóip reatha."
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: ní féidir luach a shannadh ar an athróg"
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr "%s: slánuimhir a sannadh go tagairt ainm"
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: níl comhthéacs feidhme sa scóip reatha"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "Tá teaghrán easpórtála neamhnitheach ag %s"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "Carachtar neamhbhailí %d sa teaghrán easpórtála le haghaidh %s."
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "Níl '=' sa teaghrán easpórtála le haghaidh %s."
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr "pop_var_context: ní comhthéacs feidhme é ceann shell_variables"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: níl comhthéacs global_variables ann"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr "pop_scope: ní scóip shealadach thimpeallachta é ceann shell_variables"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: ní féidir a oscailt mar CHOMHAD"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: luach neamhbhailí le haghaidh tuairisceoir comhaid rianaithe"
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s: luach comhoiriúnachta as raon"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Cóipcheart © 2012 Free Software Foundation, Inc."
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"Ceadúnas GPLv3+: GNU GPL leagan 3 nó níos déanaí <http://gnu.org/licenses/"
+"gpl.html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, leagan %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr "Is saorbhogearra é seo; tá cead agat é a athrú agus  é a athdháileadh."
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr ""
+"Ní ghabhann baránta ar bith leis, sa mhéid is atá sin ceadaithe de réir dlí."
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: ní féidir %lu beart a leithdháileadh (%lu beart leithdháilte)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: ní féidir %lu beart a leithdháileadh"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr ""
+"%s: %s:%d: ní féidir %lu beart a leithdháileadh (%lu beart leithdháilte)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: ní féidir %lu beart a leithdháileadh"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [ainm[=luach] ... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] ainm [ainm ...]"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpsvPSVX] [-m MAPA_EOCHRACH] [-f AINM_CHOMHAID] [-q AINM] [-u AINM] [-"
+"r SRAITH_EOCHRACHA] [-x SRAITH_EOCHRACHA:ORDÚ_BLAOISCE] [SRAITH_EOCHRACHA:"
+"GN�OMH_readline nó ORDÚ_readline]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [N]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [N]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [ORDÚ-IONSUITE-BLAOISCE [ARGÓINT ...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [SLONN]"
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]] [-@]] [comhadlann]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] ORDÚ [ARGÓINT ...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilnrtux] [-p] [AINM[=LUACH] ...]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilnrtux] [-p] AINM[=LUACH] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [ROGHA] AINM[=LUACH] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [ARGÓINT ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [ARGÓINT ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f comhadainm] [ainm ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [argóint ...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts teaghrán_roghanna ainm [argóint]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a AINM] [ORDÚ [ARGÓINT� ...]] [ATREORÚ ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [N]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr ""
+"fc [-e AINM_E] [-lnr] [CÉAD] [DEIREANACH] nó fc -s [PATRÚN=IONADA�] [ORDÚ]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [SONRÚ_TAISC]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [SONRÚ_TAISC ...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p CONAIR] [-dt] [AINM ...]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [PATRÚN ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d SEACH_CHUR] [n] nó history -anrw [COMHADAINM] nó history -"
+"ps ARGÓINT [ARGÓINT...]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [SONRÚ_TAISC ...] nó jobs -x ORDÚ [ARGÓINT�]"
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [SONRÚ_TAISC ... | AITHEANTAS_PRÓISIS ...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s SONRÚ_COMHARTHA | -n UIMHIR_CHOMHARTHA | -SONRÚ_COMHARTHA] "
+"AITHEANTAS_PRÓISIS | SONRÚ_TAISC ... nó kill -l [SONRÚ_COMHARTHA]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let argóint [argóint ...]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a eagar] [-d teormharcóir] [-i téacs] [-n líon_carachtar] [-N "
+"líon_carachtar] [-p leid] [-t teorainn_ama] [-u tuairisceoir_comhaid] "
+"[ainm ...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o AINM-ROGHA] [--] [ARGÓINT ...]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [AINM ...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [AINM[=LUACH] ...] nó export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [ainm[=luach] ...] nó readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source AINM_COMHAID [ARGÓINT�]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". comhadainm [argóintí]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [slonn]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ argóint... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[argóint] sonrú_comhartha ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] ainm [ainm ...]"
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [teorainn]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [MÓD]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-fn] [AITHEANTAS ...]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [AITHEANTAS_PRÓISIS ...]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for AINM [in FOCAIL ... ] ; do ORDUITHE; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( slonn1; slonn2; slonn3 )); do ORDUITHE; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select AINM [in FOCAIL ... ;] do ORDUITHE; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] P�BL�NE"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case FOCAL in [PATRÚN [| PATRÚN]...) ORDUITHE ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if ORDUITHE; then ORDUITHE; [ elif ORDUITHE; then ORDUITHE; ]... [ else "
+"ORDUITHE; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while ORDUITHE1; do ORDUITHE2; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until ORDUITHE; do ORDUITHE; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [AINM] ORDÚ [ATREORUITHE]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function AINM { ORDUITHE ; } nó AINM () { ORDUITHE ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ ORDUITHE ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "SONRÚ_TAISC [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( slonn ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ slonn ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "athróga - ainmneacha agus mínithe ar athróga áirithe blaoisce"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | comhadlann]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [AINM_ROGHA ...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v athróg] formáid [argóintí]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o ROGHA] [-A GN�OMH] [-G PATRÚN] [-W "
+"LIOSTA_FOCAL]  [-F FEIDHM] [-C ORDÚ] [-X PATRÚN_SCAGAIRE] [-P RÉIM�R] [-S "
+"IARMH�R] [AINM ...]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o rogha]  [-A gníomh] [-G patrún] [-W "
+"liosta_focal]  [-F feidhm] [-C ordú] [-X patrún_scagaire] [-P réimír] [-S "
+"iarmhír] [focal]"
+
+#: builtins.c:239
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o ROGHA] [-DEI] [AINM ...]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-d TEORMHARCÓIR] [-n COMHAIREAMH] [-O BUNÚS] [-s COMHAIREAMH] [-t] "
+"[-u TC] [-C AISGHLAOCH] [-c CANDAM] [EAGAR]"
+
+#: builtins.c:244
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-d TEORMHARCÓIR] [-n COMHAIREAMH] [-O BUNÚS] [-s COMHAIREAMH] [-"
+"t] [-u TUAIRISCEOIR_COMHAID] [-C AISGHLAOCH] [-c CANDAM] [EAGAR]"
+
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Sainigh nó taispeáin ailiasanna.\n"
+"    \n"
+"    Gan argóintí, priontáiltear an liosta ailiasanna san fhoirm\n"
+"    ath-inúsáidte 'alias AINM=LUACH' ar an ngnáth-aschur.\n"
+"    \n"
+"    I ngach cás eile, sainítear ailias do gach AINM a thugtar LUACH dó.\n"
+"    Má tá spás chun deiridh LUACH, déantar an chéad fhocal eile a sheiceáil\n"
+"    le haghaidh ionadú ailias nuair a fhairsingítear an ailias.\n"
+"    \n"
+"    Roghanna:\n"
+"      -p\tPriontáiltear gach ailias sainithe i bhfoirm ath-inúsáidte.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear fíor mura dtugtar AINM nach bhfuil ailias sainithe dó."
+
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Bain gach AINM de liosta na n-ailiasanna sainithe.\n"
+"    \n"
+"    Roghanna:\n"
+"      -a\tbaintear gach sainiú ailias.\n"
+"     \n"
+"    Aischuirtear rath ach sa chás nach bhfuil AINM ann."
+
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Scoir de lúba for, while nó until.\n"
+"    \n"
+"    Scoir de lúb 'for', 'while' nó 'until'. Má shonraítear N, scoir\n"
+"    de N lúb mhórthimpeall.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Is é 0 an stádas scortha mura bhfuil N níos lú ná 1."
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Lean ar aghaidh le lúba for, while nó until.\n"
+"    \n"
+"    Tosaigh an chéad atriall eile den lúb mhórthimpeall 'for', 'while' nó "
+"'until'.\n"
+"    Má shonraítear N, tosaigh an Nú lúb mhórthimpeall.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Is é 0 an stádas scortha mura bhfuil N níos lú ná 1."
+
+#: builtins.c:354
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Rith orduithe ionsuite na blaoisce.\n"
+"    \n"
+"    Ritear ORDÚ-IONSUITE-BLAOISCE leis na hargóintí ARGÓINT� gan cuardach\n"
+"    ordaithe a dhéanamh. Tá sé seo úsáideach más mian ordú blaoisce a\n"
+"    athshainiú mar fheidhm bhlaoisce agus gur ghá an t-ordú ionsuite a rith\n"
+"    laistigh den fheidhm.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear stádas scortha ORDÚ-IONSUITE-BLAOISCE, nó falsa sa chás "
+"nach\n"
+"    bhfuil ORDÚ-IONSUITE-BLAOISCE ina ordú ionsuite blaoisce."
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Aischuir comhthéacs an ghlaoigh reatha fhoghnáthaimh.\n"
+"    \n"
+"    Gan SLONN, aischuirtear '$líne $ainm_comhaid'. Le SLONN, aischuirtear\n"
+"    '$líne $foghnáthamh $ainm_comhaid'; is féidir lorg cruaiche a sholáthar "
+"leis an\n"
+"    fhaisnéis bhreise seo.\n"
+"    \n"
+"    Taispeánann an luach atá ag SLONN líon na bhfrámaí glaoigh le dul siar\n"
+"    roimh an ceann reatha; fráma 0 an ceann atá ar barr.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear 0 ach sa chás nach bhfuil an bhlaosc ag rith feidhme "
+"blaoisce, nó\n"
+"    sa chás go bhfuil SLONN neamhbhailí."
+
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"Athraigh comhadlann oibre na blaoisce.\n"
+"    \n"
+"    Athraíonn \"cd\" an chomhadlann reatha go COMHADLANN. Is é luach na "
+"hathróige\n"
+"    blaoisce HOME an réamhshocrú le haghaidh COMHADLANN.\n"
+"    \n"
+"    Sainmhíníonn an athróg CDPATH an chonair chuardaigh don chomhadlann ina\n"
+"    bhfuil COMHADLANN. Cuirtear idirstad (:) idir ainmneacha malartacha\n"
+"    comhadlainne i CDPATH.\n"
+"    Is ionann ainm comhadlainne folamh agus an chomhadlann reatha. Má "
+"thosaíonn\n"
+"    COMHADLANN le slaiste (/), ní usáidtear CDPATH.\n"
+"    \n"
+"    Mura aimsítear an chomhadlann, agus má ta an athróg bhlaoisce "
+"\"cdable_vars\"\n"
+"    socruithe, glactar leis an bhfocal mar ainm athróige. Má tá luach ag an "
+"athróg\n"
+"    sin, úsáidtear a luach i gcomhair COMHADLANN.\n"
+"    \n"
+"    Roghanna:\n"
+"      -L\tLean naisc shiombalaigh. Taifigh naisc shiombalaigh i COMHADLANN\n"
+"      \t\ttar éis gach \"..\" a phróiseáil.       -P\tÚsáid an chomhadlann "
+"fhisiciúil gan naisc shiombalaigh a leanúint.\n"
+"      \t\tTaifigh naisc shiombalaigh i COMHADLANN roimh \"..\" a "
+"phróiseáil.\n"
+"      -e\tMá tá an rogha -P ann, agus mura féidir an chomhadlann oibre "
+"reatha\n"
+"      \t\ta dhéanamh amach i gceart, scoir le stádas nach náid é.\n"
+"      -@\tMá thacaíonn an córas leis, taispeáin comhad le haitreabúidí "
+"bhreisithe\n"
+"      \t\tmar chomhadlann ina bhfuil na haitreabúidí bhreisithe.\n"
+"    \n"
+"    Leantar naisc shiombalaigh ar bhonn réamhshocraithe, mar a bheadh -L "
+"ann.\n"
+"    Chun \"..\" a phróiseáil, baintear páirt na conaire díreach roimhe siar "
+"go\n"
+"    slaiste (/) nó go tús COMHADLANN.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear 0 má athraíodh an chomhadlann, agus má d'éirigh le socrú "
+"$PWD\n"
+"    nuair a úsáidtear -P; i gcásanna eile aischuirtear luach nach náid é."
+
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"Priontáil ainm na comhadlainne oibre reatha.\n"
+"    \n"
+"    Roghanna:\n"
+"      -L\tpriontáil luach $PWD má thugann sé ainm na comhadlainne\n"
+"        \toibre reatha.\n"
+"       -P\tpriontáil an chomhadlann fhisiciúil, gan naisc shiombalacha\n"
+"    \n"
+"    Mar réamhshocrú, oibríonn 'pwd' faoi mar a bheadh '-L' sonraithe.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear luach de 0 ach sa chás go dtugtar rogha neamhbhailí nó nach "
+"féidir\n"
+"    an chomhadlann reatha a léamh."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Ordú neamhnitheach.\n"
+"    \n"
+"    Gan éifeacht; ní dhéanann an t-ordú faic.\n"
+"    \n"
+"    Stadas Scortha:\n"
+"    Éiríonn leis i gcónaí."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Aischuir toradh rathúil.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Éiríonn leis i gcónaí."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Aischuir toradh neamhrathúil.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Teipeann air i gcónaí."
+
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Ritheann \"command\" ordú simplí nó taispeánann eolas maidir le horduithe.\n"
+"    \n"
+"    Ritear ORDÚ le hARGÓINT� gan cuardach feidhme blaoisce, nó taispeántar\n"
+"    eolas maidir leis na horduithe sonraithe. Is féidir é seo a úsáid chun "
+"orduithe ar\n"
+"    diosca a rith má tá feidhm leis an ainm céanna ann.\n"
+"    \n"
+"    Roghanna:\n"
+"      -p\túsáidtear luach réamhshocraithe le haghaidh CONAIR a aimseoidh go "
+"cinnte\n"
+"        \tgach ceann de na gnáthríomhchláir áirge.\n"
+"      -v\ttaispeántar cur síos ar ORDÚ cosúil leis an ordú ionsuite 'type'\n"
+"      -V\ttaispeántar cur síos níos faide ar gach ORDÚ\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear an stádas scortha ó ORDÚ, nó teip sa chás nach n-aimsítear "
+"ORDÚ."
+
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"Socraíonn \"declare\" luachanna agus airíonna athróige.\n"
+"    \n"
+"    Fograíonn \"declare\" athróga agus tugann sé aitreabúidí dóibh. Gan\n"
+"    AINMneacha, taispeántar a luach agus a haitreabúidí le haghaidh gach "
+"athróg.\n"
+"    \n"
+"    Roghanna:\n"
+"      -f\tGníomh nó taispeáint srianta le hainmneacha feidhmeanna agus "
+"sainithe.\n"
+"      -F\tGníomh le hainmneacha feidhmeanna amháin (móide uimhir líne agus\n"
+"      \t\tcomhad foinse le linn dífhabhtaithe).\n"
+"      -g\tCruthaítear athróga comhchoiteanna nuair a úsáidtear é laistigh "
+"de\n"
+"      \t\tfheidhm bhlaoisce; déantar neamhaird de i gcásanna eile.\n"
+"      -p\tTaispeántar a luach agus a haitreabúidí le haghaidh gach AINM.\n"
+"    \n"
+"    Roghanna a shocraíonn aitreabúidí:\n"
+"      -a\tAINMneacha mar eagair innéacsaithe (má thacaítear leo)\n"
+"      -A\tAINMneacha mar eagair chomhthiomsaitheacha (má thacaítear leo)\n"
+"      -i\tCuirtear an aitreabúid \"integer\" (.i. slonnuimhir) le "
+"hAINMneacha.\n"
+"      -l\tTiontaítear luach gach AINM go cás íochtair agus é á shannadh.\n"
+"      -n\tBíodh AINM ina thagairt don athróg ainmnithe ag a luach.\n"
+"      -r\tBíodh AINMneacha inléite amháin.\n"
+"      -t\tCuirtear an aitreabúid \"trace\" (.i. lorg) le hAINMneacha.\n"
+"      -u\tTiontaítear luach gach AINM go cás uachtair agus é á shannadh.\n"
+"      -x\tEaspórtálfar na hAINMneacha as seo amach.\n"
+"    \n"
+"    Le \"+\" in áit \"-\", múchtar an aitreabúid shonraithe.\n"
+"    \n"
+"    Má tá an aitreabúid \"integer\" ag athróg, déantar luacháil "
+"uimhríochtuil\n"
+"    (feic an t-ordú \"let\") nuair a shanntar leis an athróg.\n"
+"    \n"
+"    Nuair a úsáidtear \"declare\" laistigh de fheidhm, beidh na hAINMneacha\n"
+"    logánta, mar a bheadh leis an t-ordú \"local\". Stopann an rogha \"-g\" "
+"é seo.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear rath ach sa chás go dtugtar rogha neamhbhailí, nó go\n"
+"    dtarlaíonn earráid shannta."
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"Socraíonn \"typeset\" luachanna agus airíonna athróige.\n"
+"    \n"
+"    Comhchiallach le \"declare\". Feic \"help declare\"."
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Sainíonn \"local\" athróga logánta.\n"
+"    \n"
+"    Cruthaítear athróg logánta darbh ainm AINM, agus cuirtear LUACH leis.\n"
+"    Is féidir ceann ar bith de na roghanna a ghlacann \"declare\" leo a "
+"úsáid\n"
+"    mar ROGHA.\n"
+"    \n"
+"    Ní féidir athróga logánta a úsáid ach laistigh de fheidhm. Tá siad "
+"infheicthe\n"
+"    san fheidhm ina shainítear iad agus a mic amháin.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear rath ach sa chás go dtugtar rogha neamhbhailí, nó go "
+"dtarlaíonn earráid,\n"
+"    nó go bhfuil an bhlaosc ag rith feidhme."
+
+#: builtins.c:557
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Scríobhann \"echo\" na hargóintí ar an ngnáthaschur.\n"
+"    \n"
+"    Taispeántar na hARGÓINT� ar an ngnáthaschur le carachtair spáis eatarthu "
+"agus\n"
+"    líne nua ina ndiadh.\n"
+"    \n"
+"    Roghanna:\n"
+"      -n\tní hiarcheanglaítear líne nua\n"
+"      -e\tcumasaítear na héaluithe cúlslaise thíos\n"
+"      -E\tdíchumasaítear na héaluithe cúlslaise\n"
+"    Tuigeann 'echo' na carachtair éalaithe le cúlslais seo a leanas:\n"
+"      \\a\tairdeall (clog)\n"
+"      \\b\tcúlspás\n"
+"      \\c\tcur deireadh le aschur\n"
+"      \\e\tcaractar éalaithe\n"
+"      \\E\tcaractar éalaithe\n"
+"      \\f\tfotha foirme\n"
+"      \\n\tlíne nua\n"
+"      \\r\taisfhilleadh carráiste\n"
+"      \\t\ttáib chothrománach\n"
+"      \\v\ttáib ingearach\n"
+"      \\\\\tcúlslais\n"
+"      \\0nnn\tan carachtar leis an gcód ASCII NNN (ochtnártha). Is féidir le "
+"NNN\n"
+"        \t\tbheith 0 go 3 digit ochtnártha ar fhad\n"
+"      \\xHH\tan carachtar ocht ngiotán leis an luach HH (heicsidheachúlach). "
+"Is\n"
+"        \t\tféidir le HH bheith 1 nó 2 digit heicsidheachúlach ar fhad.\n"
+"      \\uHHHH\tan carachtar Unicode leis an luach heicsidheachúlach HHHH.\n"
+"    \t\tIs féidir le HHHH bheith ó 1 go 8 digit heicsidheachúlach ar fhad.\n"
+"      \\UHHHHHHHHan carachtar Unicode leis an luach heicsidheachúlach "
+"HHHHHHHH.\n"
+"    \t\tIs féidir le HHHHHHHH bheith ó 1 go 8 digit heicsidheachúlach ar "
+"fhad.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear rath ach i gcás earráide scríofa."
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Scríobh na hargóintí ar an ngnáthaschur.\n"
+"    \n"
+"    Taispeáin na hARGÓINT� ar an ngnáthaschur agus líne nua ina ndiaidh.\n"
+"    \n"
+"    Roghanna:\n"
+"      -n\tná hiarcheangail líne nua\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear rath ach i gcás earráide scríofa."
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Rith argóintí mar ordú blaoisce.\n"
+"    \n"
+"    Cuir ARGÓINT� i dteaghrán amháin, úsáid an toradh mar ionchur go dtí\n"
+"    an bhlaosc, agus rith na horduithe toraidh.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear stádas scortha an ordaithe, nó rath más ordú neamhnitheach "
+"é."
+
+#: builtins.c:652
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"Cuir an t-ordú sonraithe in áit na blaoisce.\n"
+"    \n"
+"    Ritear ORDÚ, agus an ríomhchlár sonraithe curtha in áit na blaoisce "
+"seo.\n"
+"    Úsáidtear na hARGÓINT� mar argóintí don ORDÚ. Gan ÓRDÚ, cuirtear\n"
+"    atreoruithe i bhfeidhm sa bhlaosc reatha.\n"
+"    \n"
+"    Roghanna:\n"
+"      -a AINM\túsáidtear AINM mar argóint uimhir a náid don ORDÚ.\n"
+"      -c\tritear ORDÚ le timpeallacht fholamh\n"
+"      -l\tcuirtear fleiscín mar argóint uimhir a náid don ORDÚ.\n"
+"    \n"
+"    Sa chás nach féidir an t-ordú a rith, scoirfidh blaosc "
+"neamhidirghníomhach,\n"
+"    mura bhfuil an rogha blaoisce 'execfail' socruithe.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear rath ach sa chás nach bhfaightear ORDÚ nó go dtarlaíonn\n"
+"    earráid atreoraithe."
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Scoir den bhlaosc.\n"
+"    \n"
+"    Scoireann den bhlaosc le stádas N. Má fhágtar N ar lár, is é stádas\n"
+"    an chéad ordaithe deireanaigh an stádas scortha."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Scoir de bhlaosc logála isteach.\n"
+"    \n"
+"    Scoireann de bhlaosc logála isteach le stádas scortha N. Aischuirtear\n"
+"    earráid má ritear é i mblaosc nach blaosc logála isteach í."
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"Taispeáin nó rith orduithe ón liosta staire.\n"
+"    \n"
+"    Úsáidtear fc chun orduithe ón liosta staire a liostú, a chur in eagar, "
+"nó a ath-rith.\n"
+"    Más uimhreacha iad CÉAD agus DEIREANACH, sonraíonn siad an raon, nó is\n"
+"    féidir le CÉAD bheith ina theaghrán, rud a chiallaíonn an t-ordú is "
+"deireanaí a\n"
+"    thosaíonn leis an teaghrán sin.\n"
+"    \n"
+"    Roghanna:\n"
+"      -e AINM_E\troghnaigh an clár eagarthóra atá le húsáid. FCEDIT an "
+"réamhshocrú,\n"
+"               \tansin EDITOR, agus ansin vi.\n"
+"      -n\tfág uimhreacha na línte ar lár agus liosta á thaispeáint\n"
+"      -r\taisiompaigh ord na línte (.i. liostaigh an ceann is nuaí ar dtús)\n"
+"    \n"
+"    San fhormáid 'fc -s [PATRÚN=IONADA� ...] [ORDÚ]', ath-ritear ORDÚ\n"
+"    tar éis an t-ionadú SEAN=NUA a dhéanamh.\n"
+"    \n"
+"    Ailias úsáideach is ea r='fc -s', sa chaoi go ritheann 'r cc' an t-ordú "
+"is deireanaí\n"
+"    a thosaíonn le 'cc', agus ath-ritheann 'r' an t-ordú is deireanaí.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear rath nó stádas an ordaithe rite; neamh-nialas má tharlaíonn "
+"earráid."
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Bog tasc go dtí an tulra.\n"
+"    \n"
+"    Cuirtear an tasc a shonraítear le SONRÚ_TASC sa tulra agus é mar an tasc "
+"reatha.\n"
+"    Mura bhfuil SONRÚ_TASC ann, úsáidtear cibé tasc atá reatha de réir na "
+"blaoisce.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear stádas an ordaithe a cuireadh sa tulra, nó teip má "
+"tharlaíonn earráid."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Bog tascanna go dtí an cúlra.\n"
+"    \n"
+"    Cuirtear an tasc a shonraítear le SONRÚ_TASC sa chúlra cosúil le é a "
+"thosú le '&'.\n"
+"    Mura bhfuil SONRÚ_TASC ann, úsáidtear cibé tasc atá reatha de réir na "
+"blaoisce.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear rath ach sa chás go dtarlaíonn earráid nó nach bhfuil\n"
+"    rialú tascanna cumasaithe."
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"Cuimhnigh ar nó taispeáin suíomhanna ríomhchláracha.\n"
+"    \n"
+"    Faigh agus cuimhnigh ar an gconair iomlán le haghaidh gach AINM.\n"
+"    Gan argóintí, taispeántar eolas maidir le orduithe a bhfuil cuimhne "
+"orthu.\n"
+"    \n"
+"    Roghanna:\n"
+"      -d\tDéantar dearmad ar shuíomh gach AINM.\n"
+"      -l\tTaispeáintear i bhformáid atá inúsáidte mar ionchur.\n"
+"      -p CONAIR\tÚsáidtear CONAIR mar an gconair iomlán le haghaidh AINM.\n"
+"      -r\tDéantar dearmad ar gach shuíomh atá coinnithe i gcuimhne.\n"
+"      -t\tPriontáiltear an suíomh atá i gcuimhne le haghaidh gach AINM, "
+"agus\n"
+"    \t\tcuirtear AINM roimh a shuíomh má thugtar níos mó ná AINM amháin.     "
+"Argóintí:\n"
+"      AINM\tLorgaítear gach AINM i $PATH agus cuirtear le liosta na n-"
+"orduithe\n"
+"    \t\tatá coinnithe i gcuimhne é.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear rath ach sa chás nach n-aimsítear AINM, nó go bhfuil\n"
+"    rogha neamhbhailí ann."
+
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Taispeáin eolas maidir le horduithe ionsuite.\n"
+"    \n"
+"    Taispeántar achoimrí na n-orduithe ionsuite. Má shonraítear PATRÚN,\n"
+"    taispeántar cabhair chuimsitheach faoi gach ordú a mheaitseálann "
+"PATRÚN;\n"
+"    i gcásanna eile taispeántar liosta na n-ábhar cabhrach.\n"
+"    \n"
+"    Roghanna:\n"
+"      -d\ttaispeántar cur síos gairid ar gach ábhar\n"
+"      -m\ttaispeántar úsáid i bhformáid cosúil leis an lámhleabhar man(1)\n"
+"      -s\tní thaispeántar ach achoimre gairid úsáide le haghaidh gach ábhair "
+"a\n"
+"        \tmheatseálann PATRÚN\n"
+"    \n"
+"    Argóintí:\n"
+"      PATRÚN\tpatrún a shonraíonn ábhar cabhrach\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear rath ach sa chás nach n-aimsítear PATRÚN nó go dtugtar\n"
+"    rogha neamhbhailí."
+
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"Taispeáin stádas tascanna.\n"
+"   \n"
+"   Liostáiltear na tascanna gníomhacha. Le SONRÚ_TAISC, ní thaispeántar ach "
+"an tasc sin.\n"
+"   Gan roghanna, taispeántar stádas gach tasc gníomhach.\n"
+"   \n"
+"   Roghanna:\n"
+"     -l\tliostáiltear aitheantais na bpróiseas chomh maith leis an ngnáth-"
+"eolas.\n"
+"     -n\tní liostáiltear ach na próisis le stádas athruithe ón chéad fógra "
+"roimhe seo\n"
+"     -p\tliostáiltear aitheantais na bpróiseas amháin\n"
+"     -r\tní liostáiltear ach tascanna atá ag rith\n"
+"     -s\tní liostáiltear ach tascanna atá stoptha\n"
+"   \n"
+"   Le -x, ritear ORDÚ tar éis gach SONRÚ_TAISC atá in ARGÓINT� a athrú go "
+"aitheantas\n"
+"   próisis an phríomh-phróisis i ngrúpa próiseas an taisc sin.\n"
+"   \n"
+"   Stádas Scortha:\n"
+"   Aischuirtear rath ach sa chás go dtugtar rogha neamhbailí nó go "
+"dtarlaíonn earráid.\n"
+"   Má úsáidtear -x, aischuirtear an stádas scortha ó ORDÚ.  "
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"Bain tascanna den mblaosc reatha.\n"
+"    \n"
+"    Baintear gach SONRÚ_TAISC den tábla de tascanna gníomhacha. Gan\n"
+"    SONRÚ_TAISC ar bith úsáidtear an tasc atá reatha dar leis an mblaosc.\n"
+"    \n"
+"    Roghanna:\n"
+"      -a\tbaintear gach tasc mura sholáraítear SONRÚ_TAISC\n"
+"      -h\tmarcáiltear gach SONRÚ_TAISC sa chaoi nach seolfar SIGHUP chuige "
+"má\n"
+"        \tfhaigheann an bhlaosc féin SIGHUP\n"
+"      -r\tní bhaintear ach tascanna atá ag rith\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear rath ach sa chás go dtugtar rogha neamhbhailí nó "
+"SONRÚ_TAISC neamhbhailí."
+
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Seol comhartha chuig tasc.\n"
+"    \n"
+"    Seoltar an comhartha ainmnithe ag SONRÚ_COMHARTHA nó UIMHIR_CHOMHARTHA "
+"go dti\n"
+"    an tasc sonraithe le AITHEANTAS_PRÓISIS nó SONRÚ_TAISC. Mura bhfuil "
+"SONRÚ_COMHARTHA\n"
+"    nó UIMHIR_CHOMHARTHA ann, úsáidtear SIGTERM.\n"
+"    \n"
+"    Roghanna:\n"
+"      -s SONRÚ_COMHARTHA\n"
+"Is ainm comhartha é SONRÚ_COMHARTHA\n"
+"      -n UIMHIR_COMHARTHA\n"
+"Is uimhir chomhartha é SONRÚ_COMHARTHA\n"
+"      -l\tLiostáiltear ainmneacha na gcomharthaí. Má tá argóintí i ndiadh \"-"
+"l\",\n"
+"    \t\tglactar leo mar uimhreacha comharthaí agus taispeántar a n-"
+"ainmneacha.\n"
+"      -L\tMar an gcéanna le \"-l\"\n"
+"    \n"
+"    Tá \"kill\" ina ordú ionsuite blaoisce ar dhá chúis: is féidir "
+"aitheantais\n"
+"    tascanna a úsáid in ionad aitheantais próiseas, agus is féidir próisis a "
+"stopadh\n"
+"    fiú má tá uasmhéid na bpróiseas a bhfuil cead agat a chruthú sroichte "
+"agat.\n"
+"        Stádas Scortha:\n"
+"    Aischuirtear rath muna bhfuil rogha neamhbhailí ann nó muna tharla "
+"earráid."
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"Fill ó fheidhm bhlaoisce.\n"
+"    \n"
+"    Filltear ó fheidhm nó ó script léite as comhad leis an luach scortha\n"
+"    a shonraítear i N. Má fhágtar N ar lár, is é an stádas scortha ná "
+"stadas\n"
+"    an orduithe dheireanaigh a ritheadh laistigh den fheidhm nó script.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear N, nó teip sa chás nach bhfuil an bhlaosc ag rith feidhme "
+"nó scripte."
+
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Socraíonn \"export\" an aitreabúid easpórtála le haghaidh athróga blaoisce.\n"
+"    \n"
+"    Marcáiltear gach AINM le haghaidh easpórtáil uathoibríoch go dtí "
+"timpeallacht\n"
+"    na n-orduithe a ritear ina dhiaidh sin. Má sonraítear LUACH, sann LUACH\n"
+"    roimh easpórtáil.\n"
+"    \n"
+"    Roghanna:\n"
+"      -f\tcuirtear an aitreabúid i bhfeidhm ar feidhmeanna blaoisce\n"
+"      -n\tbaintear an aitreabúid ó gach AINM\n"
+"      -p\tpriontáiltear liosta de athróga agus feidhmeanna easpórtáilte\n"
+"    \n"
+"    Cuireann argóint de '--' deireadh le próiseáil na hargóintí.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear rath ach sa chás go dtugtar rogha neamhbhailí nó go bhfuil "
+"AINM neamhbhailí."
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"Iomlaoidigh paraiméadair ionaid.\n"
+"    \n"
+"    Athainmnítear na paraiméadair ionaid $N+1,$N+2 ... mar $1,$2 ...\n"
+"    Gan N, glactar leis mar 1.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear rath ach sa chás go bhfuil N diúltach, nó níos mó ná $#."
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Rith orduithe ó chomhad sa bhlaosc reatha.\n"
+"    \n"
+"    Léitear agus ritear orduithe ó AINM_CHOMHAID sa bhlaosc reatha.\n"
+"    Úsáidtear na hiontrálacha i $PATH chun an chomhadlann ina bhfuil\n"
+"    AINM_CHOMHAID a aimsiú. Má shonraítear ARGÓINT�, cuirtear iad mar\n"
+"    paraiméadair ionaid agus AINM_CHOMHAID á rith.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear stádas an ordaithe dheireanaigh a ritheadh in "
+"AINM_COMHAID.\n"
+"    Teipeann air sa chás nach féidir AINM_CHOMHAID a léamh."
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Cuir rith na blaoisce ar fionraí.\n"
+"    \n"
+"    Cuirtear rith na blaoisce seo ar fionraí go dtí go bhfaigheann sí\n"
+"    comhartha SIGCONT. Gan iallach, ní féidir blaosc logála isteach a\n"
+"    chur ar fionraí.\n"
+"    \n"
+"    Roghanna:\n"
+"      -f\tcuirtear iallach ar an t-ordú, fiú más blaosc logála isteach atá "
+"ann.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear rath ach sa chás nach bhfuil rialú tascanna cumasaithe,\n"
+"    nó go dtarlaíonn earráid."
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Luacháil slonn coinníollach.\n"
+"    \n"
+"    Leasainm é seo ar an ordú blaoisce ionsuite \"test\", ach\n"
+"    caithfear \"]\" go díreach a bheith ann mar an argóint\n"
+"    dheireanach, le bheith comhoiriúnach leis an \"[\" ag an tús."
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Taispeáin amanna próisis.\n"
+"    \n"
+"    \n"
+"Taispeántar amanna carntha úsáideora agus córais na blaoisce agus a\n"
+"    macphróiseas.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Éiríonn leis i gcónaí."
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+
+#: builtins.c:1431
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"Taispeáin nó socraigh masc mhód na gcomhad.\n"
+"    \n"
+"    Athraítear masc cruthaithe comhaid an úsáideora go MÓD. Gan MÓD,\n"
+"    taispeántar luach reatha an mhaisc.\n"
+"    \n"
+"    Ma thosaíonn MÓD le digit, glactar leis mar uimhir ochtnártha;\n"
+"    i gcásanna eile is teaghrán móid shiombalaigh é cosúil leis na cinn\n"
+"    a ghlacann chmod(1) leo.\n"
+"    \n"
+"    Roghanna:\n"
+"    -p\tgan mód, bíodh an aschur i bhformáid atá inúsáidte mar ionchur\n"
+"    -S\taschur siombalach; seachas sin aschuirfear uimhir ochtnártha\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear rath ach sa chás go bhfuil MÓD neamhbhailí\n"
+"    nó go sonraítear rogha neamhbhailí."
+
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"Fanann \"wait\" go gcríochnaíonn tasc agus aischuireann a stádas scortha.\n"
+"    \n"
+"    Fantar le gach próiseas ata sonraithe le AITHEANTAS, a d'fhéadann a "
+"bheith\n"
+"    ina aitheantas próisis nó sonrú taisc, agus tuairiscítear a stádas "
+"críochnaithe.\n"
+"    Gan AITHEANTAS, fantar le gach macphróiseas gníomhach reatha, agus "
+"aischuirtear 0.\n"
+"    Más sonrú taisc atá in AITHEANTAS, fantar le gach próiseas i bpíblíne an "
+"taisc sin.\n"
+"    \n"
+"    Má sonraítear an rogha -n, fantar leis an gcéad tasc eile a stopann "
+"agus\n"
+"    aischuirtear a stádas scortha.\n"
+"    \n"
+"    Má sonraítear an rogha -f agus má tá rialú jabanna cumasaithe, fantar go "
+"dtí\n"
+"    go stopann an AITHEANTAS sonraithe, in áit fanadh le athrú stádais sa "
+"tasc sin.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear stádas an AITHEANTAIS dheireanaigh. Teipeann ar an ordú má "
+"tá\n"
+"    AITHEANTAS neamhbhailí nó má sonraítear rogha neamhbhailí."
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"Fanann \"wait\" go gcríochnaíonn próiseas agus aischuireann an stádas "
+"scortha.\n"
+"    \n"
+"    Fantar le gach próiseas atá sonraithe le AITHEANTAS_PRÓISIS, agus\n"
+"    tuairiscítear a stádais chríochnaithe. Gan AITHEANTAS_PRÓISIS, fantar\n"
+"    le gach macphróiseas gníomhach reatha, agus aischuirtear 0.\n"
+"    Ní mór d'AITHEANTAS_PRÓISIS bheith ina aitheantas próisis.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear stádas an AITHEANTAIS dheireanaigh. Teipeann ar an\n"
+"    ordú má tá AITHEANTAS_PRÓISIS neamhbhailí nó má shonraítear\n"
+"    rogha neamhbhailí."
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Rith orduithe le haghaidh gach mír i liosta.\n"
+"    \n"
+"    Ritheann an lúb 'for' sraith ordaithe le haghaidh gach mír i liosta\n"
+"    míreanna. Gan 'in WORDS ...;', úsáidtear 'in \"$@\"'.\n"
+"    Le haghaidh gach eilimint i bhFOCAIL, tugtar an luach sin do AINM agus\n"
+"    ritear na hORDUITHE.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear stádas an ordaithe dheireanaigh a ritheadh."
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Lúib for uimhriochtúil.\n"
+"    \n"
+"    Mar an gcéanna le\n"
+"    \t(( SLONN1 ))\n"
+"    \twhile (( SLONN2 )); do\n"
+"    \t\tORDUITHE\n"
+"    \t\t(( SLONN3 ))\n"
+"    \tdone\n"
+"    Is sloinn uimhreachtúla iad SLONN1, SLONN2 agus SLONN3.\n"
+"    Má fhágtar slonn ar bith ar lár, oibríonn an lúib mar a bheadh luach de "
+"1 air.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear stádas an ordaithe dheireanaigh a ritheadh."
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"Tuairscíonn \"time\" tréimhse rite píblíne.\n"
+"    \n"
+"    Ritear P�BL�NE agus taispeántar achoimre den fhíor-am, am LAP\n"
+"    an úsáideora agus am LAP an chórais a chaitheadh ag rith P�BL�NE\n"
+"    nuair a stopann sí.\n"
+"    \n"
+"    Roghanna:\n"
+"      -p\tTaispeántar an achoimre sa bhformáid iniompartha POSIX.\n"
+"    \n"
+"    Úsáidtear luach na hathróige TIMEFORMAT don fhormáid aschuir.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Is é stadas aischuir P�BL�NE an stádas aischuir ó \"time\"."
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Rith orduithe de réir mheaitseála patrún.\n"
+"    \n"
+"    Ritear ORDUITHE de réir mar a mheaitseálann FOCAL an PATRÚN.\n"
+"    Úsáidtear '|' chun na patrúin a dheighilt.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear stádas an ordaithe dheireanaigh a ritheadh."
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Ritheann \"if\" orduithe de réir na sloinn choinníllocha.\n"
+"    \n"
+"    Ritear an liosta \"if ORDUITHE\". Má tá stádas scortha de náid aige,\n"
+"    ritear an liosta \"then ORDUITHE\". Le stádais eile, ritear gach liosta\n"
+"    \"elif ORDUITHE\" ceann ar cheann, agus má tá stádas scortha de náid ag\n"
+"    ceann acu ritear an liosta \"then ORDUITHE\" cuí agus ansin tá deireadh\n"
+"    leis an ordú \"if\".\n"
+"    I gcásanna eile, ritear an liosta \"else ORDUITHE\", más ann dó.\n"
+"    Is é stádas an chomhstruchtúir iomláin stádas scortha an ordaithe\n"
+"    dheireanaigh a ritheadh, nó náid sa chás nach raibh coinníoll\n"
+"    ar bith fíor.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear stádas scortha an ordaithe dheireanaigh a ritheadh."
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Rith orduithe chomh fada agus a éiríonn le tástáil.\n"
+"   \n"
+"   Fairsingítear agus ritear ORDUITHE2 chomh fada agus atá stádas scortha\n"
+"   de náid ag an t-ordú deireanach sna hORDUITHE1 a leanann 'while'.\n"
+"   \n"
+"   Stádas Scortha:\n"
+"   Aischuirtear stádas an ordaithe deireanach a ritheadh."
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Rith orduithe chomh fada agus a theipeann ar tástáil.\n"
+"   \n"
+"   Fairsingítear agus ritear ORDUITHE chomh fada agus atá stádas scortha\n"
+"   nach náid é ag an t-ordú deireanach sna hORDUITHE 'until'.\n"
+"   \n"
+"   Stádas Scortha:\n"
+"   Aischuirtear stádas an ordaithe deireanach a ritheadh."
+
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"Cruthaíonn \"coproc\" comhphróiseas ainmnithe AINM.\n"
+"    \n"
+"    Ritear ORDÚ go haisioncronach. Beidh gnáthaschur agus gnáthionchur\n"
+"    an ordaithe ceangailte trí phíopa le tuairisceoirí comhaid a bheidh\n"
+"    sannta do innéacsanna 0 agus 1 de eagar athróga ainmnithe AINM sa\n"
+"    bhlaosc atá ag rith. Is é \"COPROC\" an tAINM réamhshocraithe.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuireann an t-ordú \"coproc\" stádas scortha de 0."
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"Sainigh feidhm bhlaoisce.\n"
+"    \n"
+"    Cruthaíonn feidhm bhlaoisce darbh ainm AINM. Nuair a úsáidtear mar ordú\n"
+"    simplí é, ritheann AINM na hORDUITHE i gcomhthéacs na blaoisce glaoigh.\n"
+"    Nuair a ghlaoitear AINM, tugtar na hargóintí don fheidhm mar $0 ... $n, "
+"agus\n"
+"    tá ainm na feidhme i $FUNCNAME.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear rath mura bhfuil AINM inléite amháin."
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Grúpáil orduithe mar aonad.\n"
+"    \n"
+"    Rith tacar orduithe i ngrúpa. Seo bealach amháin chun tacar iomlán\n"
+"    orduithe a atreorú.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear stádas an ordaithe dheireanaigh a ritheadh."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"Tosaigh tasc arís sa tulra.\n"
+"\n"
+"   Is ionann é seo agus an argóint SONRÚ_TAISC don ordú 'fg'.\n"
+"   Atosaítear tasc atá stoptha nó sa chúlra. Sonraíonnn SONRÚ_TAISC\n"
+"   ainm nó uimhir taisc. Má leanann '&' SONRÚ_TAISC, ritear an tasc sa\n"
+"   chúlra, cosúil leis an tasc a chur mar argóint le 'bg'.\n"
+"   \n"
+"   Stádas Scortha:\n"
+"   Aischuirtear stádas an taisc atosaithe."
+
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Faigh luach sloinn uimhríochtúil.\n"
+"    \n"
+"    Faightear luach an tSLOINN de réir na rialacha a bhaineann le\n"
+"    luacháil uimhríochtúil. Tá an t-ordú seo mar an gcéanna le\n"
+"    \"let SLONN\".\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear 1 más 0 an luach atá ag SLONN; aischuirtear 0 i gcásanna "
+"eile."
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"Ainmneacha na n-athróg coitianta agus a n-úsáid. \n"
+"    BASH_VERSION\tEolas maidir le leagan an Bash seo.\n"
+"    CDPATH\tLiosta deighilte le hidirstaid de chomhadlanna ina dhéanfar\n"
+"    \t\tcuardach ar chomhadlanna a shonraítear mar argóintí do \"cd\".\n"
+"    GLOBIGNORE\tLiosta deighilte le hidirstaid de phatrúin a dhéanann cur\n"
+"    \t\tsíos ar ainmneacha na gcomhad a thabharfar neamhaird orthu.\n"
+"    HISTFILE\tAinm an chomhaid ina bhfuil stair do chuid orduithe.\n"
+"    HISTFILESIZE\tUasmhéid na línte don chomhad staire.\n"
+"    HISTSIZE\tUasmhéid na línte staire atá ar fáil do bhlaosc atá ag rith.\n"
+"    HOME\tConair iomlán do chomhadlann logála isteach.\n"
+"    HOSTNAME\tAinm an ríomhaire reatha.\n"
+"    HOSTTYPE\tCineál an LAP ar a bhfuil an Bash seo ag rith.\n"
+"    IGNOREEOF\tRialaíonn sé seo cad a dhéanfaidh an bhlaosc nuair\n"
+"    \t\ta fhaigheann sí carachtar EOF mar an t-aon ionchur.\n"
+"    \t\tMá tá sé socraithe, glactar leis a luach mar líon na\n"
+"    \t\tgcarachtar EOF atá ceadaithe i ndiaidh a chéile ar líne folamh\n"
+"    \t\tsula scoirfidh an bhlaosc (10 mar réamhshocrú). Mura\n"
+"    \t\tbhfuil sé socruithe, cialaíonn EOF deireadh an ionchuir.\n"
+"    MACHTYPE\tTeaghrán ina bhfuil cur síos ar an gcóras ar a bhfuil\n"
+"    \t\tan Bash seo ag rith.\n"
+"    MAILCHECK\tCé chomh minic, i soicind, a chuardaíonn Bash ríomhphost "
+"nua.\n"
+"    MAILPATH\tLiosta deighilte le hidirstaid de chomhadainmneacha a\n"
+"    \t\tsheiceálann Bash le haghaidh ríomhphost nua.\n"
+"    OSTYPE\tLeagan Unix ar a bhfuil an bhlaosc seo ag rith.\n"
+"    PATH\tLiosta deighilte le hidirstaid de chomhadlanna a chuardaíonn Bash\n"
+"    \t\tagus orduithe á lorg aige.\n"
+"    PROMPT_COMMAND\tOrdú atá le rith roimh priontáil gach phríomhleide.\n"
+"    PS1\t\tTeaghrán na príomhleide.\n"
+"    PS2\t\tTeaghrán na leide tánaistí.\n"
+"    PWD\t\tConair iomlán na comhadlainne reatha.\n"
+"    SHELLOPTS\tLiosta deighilte le hidirstaid de na roghanna blaoisce\n"
+"    \t\tatá cumasaithe.\n"
+"    TERM\tCineál an teirminéil reatha.\n"
+"    TIMEFORMAT\tAn fhormáid aschuir le haghaidh na staitisticí ama a\n"
+"    \t\tthaispeánann an focal coimeádta \"time\".\n"
+"    auto_resume\tCialaíonn neamhnialais go gcuardaítear focal ordaithe\n"
+"    \t\tatá ar líne leis féin sa liosta reatha de tascanna stoptha\n"
+"    \t\tar dtús. Más ann dó, cuirtear an tasc sin sa tulra.\n"
+"    \t\tCialaíonn luach de \"exact\" go bhfuil meaitseáil dhíreach le\n"
+"    \t\thordú sa liosta reatha de tascanna stoptha riachtanach.\n"
+"    \t\tCialaíonn luach de \"substring\" go bhfuil meaitseáil le\n"
+"    \t\tfo-theaghrán den tasc riachtanach.\n"
+"    \t\tCialaíonn luach ar bith eile go gaithfidh an t-ordu bheith\n"
+"    \t\tina réimír de tasc stoptha.\n"
+"    histchars\tNa carachtair a rialaíonn fairsingiú staire agus\n"
+"    \t\tionadú mear. Is é an chéad charactar an ceann le haghaidh\n"
+"    \t\tfairsingiú staire, \"!\" de ghnáth. Is é an dara charactar an\n"
+"    \t\tceann le haghaidh ionadú mear, \"^\" de ghnáth. Is é an triú\n"
+"    \t\tceann an carachtar \"nóta tráchta staire\", \"#\" de ghnáth.\n"
+"    HISTIGNORE\tLiosta deighilte le hidirstaid de phatrúin a shonraíonn\n"
+"    \t\tna horduithe a chuirfear leis an liosta staire.\n"
+
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Cuir comhadlanna ar an gcruach.\n"
+"    \n"
+"    Cuireann comhadlann ar bharr na cruaiche comhadlanna, nó rothlaíonn\n"
+"    an chruach, ag cur barr nua na cruaiche mar an chomhadlann oibrithe\n"
+"    reatha. Gan argóintí, malartaítear an dá chomhadlann ar bharr.\n"
+"    \n"
+"    Roghanna:\n"
+"    -n\tNá déantar an gnáthathrú comhadlainne agus comhadlanna á gcur\n"
+"    \tleis an gcruach; ní athraítear ach an chruach.\n"
+"    \n"
+"    Argóintí:\n"
+"      +N\tRothlaítear an chruach sa chaoi go mbeidh an Nú chomhadlann (ag\n"
+"    \tcomhaireamh ó thaobh clé an liosta a thaispeánann \"dirs\" agus ag "
+"tosú\n"
+"    \tó náid) ar bharr.\n"
+"    \n"
+"      -N\tRothlaítear an chruach sa chaoi go mbeidh an Nú chomhadlann (ag\n"
+"    \tcomhaireamh ó thaobh deas an liosta a thaispeánann \"dirs\" agus ag "
+"tosú\n"
+"    \tó náid) ar bharr.\n"
+"    \n"
+"      COMHADLANN\tCuirtear COMHADLANN ar bharr na cruaiche, agus socraítear\n"
+"      \tí mar an chomhadlann oibrithe reatha.\n"
+"    \n"
+"    Taispeánann an t-ordú ionsuite \"dirs\" cruach na gcomhadlann.     \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear rath ach sa chás go sonraítear argóint neamhbhailí, nó\n"
+"    go dteipeann ar an athrú comhadlainne."
+
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Bain comhadlanna ón gcruach.\n"
+"    \n"
+"    Baintear comhadlanna ón gcruach comhadlanna. Gan argóintí, baintear an\n"
+"    chomhadlann ó bharr na cruaiche, agus téann go dtí an chomhadlann\n"
+"    atá ar bharr.\n"
+"    \n"
+"    Roghanna:\n"
+"    -n\tNá déantar an gnáthathrú comhadlainne agus comhadlanna á gcur\n"
+"    \tleis an gcruach; ní athraítear ach an chruach.\n"
+"    \n"
+"    Argóintí:\n"
+"      +N\tBaintear an Nú chomhadlann ag comhaireamh ó thaobh clé an liosta\n"
+"    \ta thaispeánann \"dirs\" agus ag tosú ó náid. Mar shampla, baineann\n"
+"    \t\"popd +0\" an chéad chomhadlann, agus \"popd +1\" an dara cheann.\n"
+"    \n"
+"      -N\tBaintear an Nú chomhadlann ag comhaireamh ó thaobh deas an liosta\n"
+"    \ta thaispeánann \"dirs\" agus ag tosú ó náid. Mar shampla, baineann\n"
+"    \t\"popd -0\" an chomhadlann dheireanach, agus \"popd -1\" an ceann\n"
+"    \tleathdheireanach.\n"
+"    \n"
+"    \n"
+"      COMHADLANN\tCuirtear COMHADLANN ar bharr na cruaiche, agus socraítear\n"
+"      \tí mar an chomhadlann oibrithe reatha.\n"
+"    \n"
+"    Taispeánann an t-ordú ionsuite \"dirs\" cruach na gcomhadlann.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear rath ach sa chás go sonraítear argóint neamhbhailí, nó\n"
+"    go dteipeann ar an athrú comhadlainne."
+
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Taispeáin cruach na gcomhadlann.\n"
+"    \n"
+"    Taispeáin liosta na gcomhadlann a bhfuil cuimhne orthu faoi láthair.\n"
+"    Cuirtear comhadlanna ar an liosta leis an ordú 'pushd'. Is féidir dul\n"
+"    siar trín liosta leis an ordú 'popd'.\n"
+"    \n"
+"    Roghanna:\n"
+"      -c\tglantar cruach na gcomhadlann trí gach mhír a bhaint de\n"
+"      -l\tná priontáiltear na comhadlanna i gcoibhneas le do chomhadlann "
+"bhaile\n"
+"      \tagus le tilde rompu\n"
+"      -p\tpriontáiltear cruach na gcomhadlann, mír amháin ar gach líne\n"
+"      -v\tpriontáiltear cruach na gcomhadlann, mír amháin ar gach líne agus\n"
+"      \ta háit sa chruach roimpi\n"
+"    \n"
+"    Argóintí:\n"
+"      +N\tTaispeántar mír N, agus uimhrithe curtha ar na míreanna ó thaobh "
+"clé\n"
+"      \tan liosta a thaispeántar le 'dirs' rite gan argóintí, ag tosú ó "
+"náid.\n"
+"      -N\tTaispeántar mír N, agus uimhrithe curtha ar na míreanna ó thaobh "
+"deas\n"
+"      \tan liosta a thaispeántar le 'dirs' rite gan argóintí, ag tosú ó "
+"náid.\n"
+"      \n"
+"      Stádas Scortha:\n"
+"      Aischuirtear rath muna bhfuil rogha neamhbhailí ann nó muna tharla "
+"earráid."
+
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"Socraigh agus díshocraigh roghanna na blaoisce.\n"
+"    \n"
+"    Athraítear socrú gach rogha blaoisce AINM_ROGHA. Gan argóintí roghnacha "
+"ar bith,\n"
+"    liostáiltear gach AINM_ROGHA, nó gach rogha blaoisce mura bhfuil "
+"AINM_ROGHA\n"
+"    ann, lena stádas socruithe nó díshocraithe.\n"
+"    \n"
+"    Roghanna:\n"
+"      -o\tbíodh AINM_ROGHA srianta dóibh siúd atá inúsáidte le 'set -o'\n"
+"      -p\tpriontáiltear gach rogha blaoisce le comhartha dá stádas\n"
+"      -q\tcuir cosc ar aschur\n"
+"      -s\tcumasaigh (socraigh) gach AINM_ROGHA\n"
+"      -u\tdíchumasaigh (díshocraigh) gach AINM_ROGHA\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear rath má tá AINM_ROGHA cumasaithe. Teipeann ar shopt má "
+"thugtar\n"
+"    rogha neamhbhailí, nó má tá AINM_ROGHA díchumasaithe."
+
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+
+#: builtins.c:1971
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Taispeáin na hiomlánaithe atá ar fáil de réir na roghanna.\n"
+"    \n"
+"    Tá sé seo ceaptha le húsáid i bhfeidmeanna blaoisce a dhéanann "
+"iomlánaithe.\n"
+"    Má thugtar an argóint roghnach FOCAL, cruthaítear iomlánaithe\n"
+"    atá comhoiriúnach le FOCAL.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear rath ach sa chás go dtugtar rogha neamhbhailí nó go "
+"dtarlaíonn earráid."
+
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"Athraíonn nó taispeánann \"compopt\" na roghanna iomlánaithe.\n"
+"    \n"
+"    Athraítear na roghanna iomlánaithe le haghaidh gach AINM,\n"
+"    nó gan AINMneacha taispeántar an t-iomlánú atá á dhéanamh faoi láthair.\n"
+"    Gan ROGHA ar bith, taispeántar na hiomlánaithe le haghaidh gach AINM\n"
+"    nó an mionsonrú iomlánaithe reatha.\n"
+"    \n"
+"    Roghanna:\n"
+"    \t-o ROGHA\tSocraítear an rogha iomlánaithe ROGHA le haghaidh gach "
+"AINM.\n"
+"    \t-D\t\tAthraítear roghanna don iomlánú ordaithe \"réamhshocraithe\".\n"
+"    \t-E\t\tAthraítear roghanna don iomlánú ordaithe \"folamh\".\n"
+"    \t-I\t\tAthraítear roghanna don iomlánú ar an gcéad focal.\n"
+"    \n"
+"    Le \"+o+ in áit \"-o\", múchtar an rogha shonraithe.\n"
+"    \n"
+"    Argóintí:\n"
+"    \n"
+"    Tagraíonn gach AINM do ordú a bhfuil mionsonrú iomlánaithe sainmhínithe\n"
+"    dó roimh ré leis an ordú ionsuite \"complete\". Gan AINM, ní mór "
+"\"compopt\"\n"
+"    a ghlaoigh ó fheidhm atá ag déanamh iomlánaithe ag an am, agus "
+"athraítear\n"
+"    na roghanna don déantóir iomlánaithe sin atá ag rith.\n"
+"    \n"
+"    Stádas Scortha:\n"
+"    Aischuirtear rath ach sa chás go dtugtar rogha neamhbhailí, nó nach\n"
+"    bhfuil sonrú iomlánaithe ann le haghaih AINM."
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"Léann \"mapfile\" línte ón ngnáthionchur agus cuireann in athróg eagair "
+"innéacsaithe iad.\n"
+"    \n"
+"    Léann línte ón ngnáthionchur agus cuireann san athróg eagair "
+"innéacsaithe\n"
+"    EAGAR iad, nó léann ón dtuairisceoir comhaid TC má shonraítear -u. Is í "
+"an\n"
+"    athróg MAPFILE an eagar réamhshocraithe.\n"
+"    \n"
+"    Roghanna:\n"
+"      -d TEORMHARCÓIR\tÚsáidtear TEORMHARCÓIR chun deireadh a chur le "
+"línte.\n"
+"      -n COMHAIREAMH\tCóipeáiltear COMHAIREAMH líne ar a mhéid. Más 0 é "
+"COMHAIREAMH,\n"
+"      \t\tcóipeáiltear gach líne.\n"
+"      -O BUNÚS\tTosaítear ag sannadh go EAGAR ag an innéacs BUNÚS. Is é 0 an "
+"BUNÚS\n"
+"      \t\tréamhshocraithe.\n"
+"      -s COMHAIREAMH\tDéantar neamhaird de na chéad COMHAIREAMH líne a "
+"léitear.\n"
+"      -t\tBaintear TEORMHARCÓIR ó deireadh gach líne (carachtar líne nua\n"
+"      réamhshocraithe).\n"
+"      -u TC\tLéitear línte ón dtuairisceoir comhad TC in áit an "
+"ghnáthionchuir.\n"
+"      -C AISGHLAOCH\tLuacháiltear AISGHLAOCH tar éis gach CANDAM líne a "
+"léitear.\n"
+"      -c CANDAM\tLíon na línte atá le léamh idir glaoanna ar AISGHLAOCH.\n"
+"      \n"
+"      Argóintí:\n"
+"        EAGAR\tAinm an athróige eagair atá le húsáid le haghaidh sonraí "
+"comhaid.\n"
+"      \n"
+"      Má shonráitear -C gan -c, is é 5000 an CANDAM réamhshocraithe. Agus "
+"AISGHLAOCH\n"
+"      á luacháil, tugtar dó innéacs na céad eiliminte eile atá le sannadh "
+"agus\n"
+"      an líne atá le sannadh don eilimint sin mar argóintí breise.\n"
+"      \n"
+"      Gan BUNÚS sonraithe go soiléir, glanfaidh \"mapfile\" EAGAR roimh faic "
+"a\n"
+"      shannadh dó.\n"
+"      \n"
+"      Stádas Scortha:\n"
+"      Aischuirtear rath ach sa chás go sonraítear rogha neamhbhailí, nó go "
+"bhfuil\n"
+"      EAGAR inléite amháin, nó nach eagar innéacsaithe é EAGAR."
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Léann línte ó chomhad agus cuireann in athróg eagair iad.\n"
+"    \n"
+"    Comhchiallach le \"mapfile\"."
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "Aischuir comhthéacs an ghlaoigh reatha fhoghnáthaimh.\n"
+#~ "    \n"
+#~ "    Gan SLONN, aischuirtear "
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process: próiseas %5ld (%s) sa phíblíne"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "Comhartha neamhaithnid #"
+
+#~ msgid "Copyright (C) 2018 Free Software Foundation, Inc."
+#~ msgstr "Cóipcheart © 2018 Free Software Foundation, Inc."
+
+#~ msgid ":"
+#~ msgstr ":"
+
+#~ msgid "true"
+#~ msgstr "true"
+
+#~ msgid "false"
+#~ msgstr "false"
+
+#~ msgid "times"
+#~ msgstr "times"
+
+#~ msgid "xrealloc: cannot reallocate %lu bytes (%lu bytes allocated)"
+#~ msgstr ""
+#~ "xrealloc: ní féidir %lu beart a athleithdháileadh (%lu beart leithdháilte)"
+
+#~ msgid "xrealloc: cannot allocate %lu bytes"
+#~ msgstr "xrealloc: ní féidir %lu beart a leithdháileadh"
+
+#~ msgid "xrealloc: %s:%d: cannot reallocate %lu bytes (%lu bytes allocated)"
+#~ msgstr ""
+#~ "xrealloc: %s:%d: ní féidir %lu beart a athleithdháileadh (%lu beart "
+#~ "leithdháilte)"
diff --git a/po/gl.gmo b/po/gl.gmo
new file mode 100644
index 0000000..36e79c5
--- /dev/null
+++ b/po/gl.gmo
diff --git a/po/gl.po b/po/gl.po
new file mode 100644
index 0000000..ae28418
--- /dev/null
+++ b/po/gl.po
@@ -0,0 +1,4805 @@
+# Galician translation for bash package.
+# Copyright (C) 2011 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+#
+# Leandro Regueiro <leandro.regueiro@gmail.com>, 2011.
+# Francisco Diéguez <frandieguez@ubuntu.com>, 2012.
+# Fran Dieguez <frandieguez@gnome.org>, 2012.
+#
+# Proxecto Trasno - Adaptación do software libre á lingua galega:  Se desexas
+# colaborar connosco, podes atopar máis información en <http://trasno.net>
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: bash 4.2\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2012-02-23 14:38+0100\n"
+"Last-Translator: Leandro Regueiro <leandro.regueiro@gmail.com>\n"
+"Language-Team: Galician <proxecto@trasno.net>\n"
+"Language: gl\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=2; plural=(n!=1);\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "subíndice de matriz incorrecto"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr ""
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: non é posíbel converter a matriz de indizada a asociativa"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: índice de matriz asociativa non válido"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: non é posíbel asignar a un índice que non é numérico"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr "%s: %s: se debe usar un subíndice ao asignar a unha matriz asociativa"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: non foi posíbel crear: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr ""
+"bash_execute_unix_command: non foi posíbel atopar a combinación de teclas "
+"para a orde"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: o primeiro carácter que non é espazo en branco non é `\"'"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "no hai un `%c' que peche en %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: falta un `:' separador"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "%s: non se pode borrar a asignación"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr ""
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr ""
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr ""
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "`%s': nome de alias non válido"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "no se activó a edición de liña"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "`%s': nome de combinación de teclas non válido"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: non se pode leer: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "`%s': nome de función descoñecido"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s non está asignado a ningunha tecla.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s pódese invocar a través de "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "%s: non se pode borrar a asignación"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "contía de ciclo"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "só ten significado nun ciclo `for', `while' ou `until'"
+
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Devolve o contexto da chamada a subrutina actual.\n"
+"    \n"
+"    Sen EXPR, devolve \"$liña $nomeficheiro\".  Con EXPR, devolve\n"
+"    \"$liña $subrutina $nomeficheiro\"; esta información adicional\n"
+"    pódese usar para fornecer un volcado de pila.\n"
+"    \n"
+"    O valor de EXPR indica cantos marcos de chamada se debe retroceder\n"
+"    antes do actual; o marco inicial é o marco 0.\n"
+"    \n"
+"    Estado de Saída:\n"
+"    Devolve 0 a menos que o shell non estea executando unha función de "
+"shell\n"
+"    ou EXPR sexa non válida."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "HOME non está definido"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "demasiados argumentos"
+
+#: builtins/cd.def:342
+#, fuzzy
+msgid "null directory"
+msgstr "non hai outro directorio"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "OLDPWD non está definido"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "liña %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "aviso: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: uso: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: a opción require un argumento"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: requírese un argumento numérico"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: non se atopou"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: opción non válida"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: nome de opción non válido"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "`%s': non é un identificador válido"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "número octal non válido"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "número hexadecimal non válido"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "número non válido"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: especificación de sinal non válida"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "`%s': no é un pid ou unha especificación válida de traballo"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: variábel de só lectura"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s fóra de rango"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "argumento"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s fóra de rango"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: non existe ese traballo"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: no hai control de traballos"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "no ha control de traballos"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: restrinxido"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "restrinxido"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: no é una orde interna do shell"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "erro de escritura: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "erro ao estabelecer os atributos da terminal: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "erro ao obtener os atributos da terminal: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: erro ao obtener o directorio actual: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: especificación de traballo ambigüa"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr ""
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: non é posíbel borrar: %s é de só lectura"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: non é posíbel borrar"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: nome de acción non válido"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: non hai completado de especificación"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "aviso: é posíbel que a opción -F non funcione como se espera"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "aviso: é posíbel que a opción -C non funcione como se espera"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "non se está executando a función de completado"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "só se pode usar dentro dunha función"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr ""
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr ""
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr ""
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, fuzzy, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "`%s': nome de alias non válido"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "non se pode use `-f' para facer funcións"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: función de só lectura"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr ""
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: non é posíbel destruír variábeis de matriz desta forma"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: non é posíbel converter unha matriz asociativa a indizada"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "a carga dinámica non está dispoñíbel"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "non é posíbel abrir o obxecto compartido %s: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "non é posíbel atopar %s no obxecto compartido %s: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: non foi cargado dinamicamente"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr ""
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: non foi cargado dinamicamente"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: non foi posíbel eliminar: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: é un directorio"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: non é un ficheiro regular"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: o ficheiro é demasiado grande"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: non é posíbel executar o ficheiro binario"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: non foi posíbel executar: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "logout\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "non é un shell de entrada: use `exit'"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Hai traballos pendentes.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Hay traballos en execución.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "non foi posíbel atopar a orde"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "especificación de historial"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: non é posíbel abrir o ficheiro temporal: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "actual"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "o traballo %d iniciou sen control de traballo"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: opción ilegal -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: a opción require un argumento -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "asociación desactivada"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: táboa de asociación baleira\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "coinc\torde\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Orde do shell que coincide coa palabra `"
+msgstr[1] "Orde do shell que coincide coas palabras `"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"non hai temas de axuda que coincidan con «%s». Probe «help help» ou «man -k "
+"%s» ou «info %s»"
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: non foi posíbel abrir: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Estas ordes do shell están definidas internamente.  Teclee `help' para\n"
+"ver esta lista.\n"
+"Teclee `help nome' para saber máis sobre a función `nome'.\n"
+"Use `info bash' para saber máis sobre o shell en xeral.\n"
+"Use `man -k' o `info' para saber máis sobre as órdenes que non están nesta "
+"lista.\n"
+"\n"
+"Un asterisco (*) xunto a un nome significa que a orde está desactivada.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "non foi posíbel usar máis dun de -anrw"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "posición no historial"
+
+#: builtins/history.def:340
+#, fuzzy, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: nome de opción non válido"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: fallou a expansión do historial"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: fallou inlib"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "non se permiten outras opcións con «-x»"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: os argumentos deben ser procesos ou IDs de traballos"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Erro descoñecido"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "agardábase unha expresión"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: non é unha matriz indizada"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: especificación de descritor de ficheiro non válida"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: descritor de ficheiro non válido: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: conta de liñas non válida"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: orixe de matriz non válido"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: quantum de chamada non válido"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "nome de variábel de matriz baleiro"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "requírese a compatibilidade de variábel de matriz"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "`%s': falta o carácter de formato"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "`%c': especificación de formato de tempo non válida"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "`%c': carácter de formato non válido"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "aviso: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr ""
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "falta o díxito hexadecimal para \\x"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "falta o díxito unicode para \\%c"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "non hai outro directorio"
+
+#: builtins/pushd.def:360
+#, fuzzy, c-format
+msgid "%s: invalid argument"
+msgstr "%s: límite de argumento non válido"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<non hai directorio actual>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "a pila de directorios está baleira"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "índice da pila de directorios"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Mostra a lista de directorios actualmente gravados.  Os directorios\n"
+"    gárdanse na lista coa orde `pushd'; pode ir saíndo da\n"
+"    lista coa orde `popd'.\n"
+"    \n"
+"    Opcións:\n"
+"      -c\tlimpa a pila de directorios, eliminando todos os elementos\n"
+"      -l\tnon mostra as versións con prefixo de til dos directorios\n"
+"    \trelativos ao seu directorio inicial\n"
+"      -p\tmostra a pila de directorios cunha entrada por liña\n"
+"      -v\tmuestra a pila de directorios cunha entrada por liña coa\n"
+"    \tsúa posición na pila como prefixo\n"
+"    \n"
+"    Argumentos:\n"
+"      +N\tMostra a N-ésima entrada contando desde a esquerda da\n"
+"    \tlista mostrada por dirs cando se chama sen opcións,\n"
+"    \tcomezando desde cero.\n"
+"    \n"
+"      -N\tMostra a N-ésima entrada contando desde a dereita da\n"
+"\tlista mostrada por dirs cando se chama sen opcións,\n"
+"\tcomezando desde cero."
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Engade un directorio ao tope da rima de directorios, ou rota\n"
+"    a pila, facendo que o novo tope da rima sexa o\n"
+"    directorio de trabajo actual.  Sen argumentos, intercambia\n"
+"    os dous directorios do tope.\n"
+"    \n"
+"    Argumentos:\n"
+"    +N\tRota a pila para que o N-ésimo directorio (contando\n"
+"    \tda izquierda da lista mostrada por `dirs',\n"
+"    \tcomezando desde cero) estea no tope.\n"
+"    -N\tRota a pila para que o N-ésimo directorio (contando\n"
+"    \tda derecha da lista mostrada por `dirs',\n"
+"    \tcomezando desde cero) estea no tope.\n"
+"    \n"
+"     dir\tagrega DIR á rima de directorios no tope,\n"
+"    \tfacéndoo o novo directorio de traballo actual.\n"
+"    \n"
+"    A orde interna `dirs' mostra a rima de directorios."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Borra entradas da pila de directorios.  Sen argumentos, borra\n"
+"    directorio do tope da pila, e cambia ao novo directorio tope.\n"
+"    \n"
+"    Opcións:\n"
+"      -n\tsuprime o cambio normal de directorio cando se borra\n"
+"    \tdirectorios da pila, así só se manipula a pila.\n"
+"    \n"
+"    Argumentos:\n"
+"      +N\tBorra a N-ésima entrada contando da esquerda da\n"
+"    \tlista mostrada por `dirs', comenzando desde cero.\n"
+"    \tPor exemplo: `popd +0' borra o primeiro directorio, `popd +1'\n"
+"    \to segundo.\n"
+"    \n"
+"      -N\tBorra a N-ésima entrada contando da derecha da\n"
+"    \tlista mostrada por `dirs', comezando desde cero.\n"
+"    \tPor exemplo: `popd -0' borra o último directorio, `popd -1'\n"
+"    \to penúltimo.\n"
+"    \n"
+"    A orde interna `dirs' mostra a pila de directorios."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: especificación de tempo de expiración non válida"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "erro de lectura: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr "só se pode usar «return» nunha función ou guión lido con «source»"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "non é posíbel borrar ao mesmo tempo unha función e unha variábel"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: non é unha variábel de matriz"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: non é unha función"
+
+#: builtins/setattr.def:194
+#, fuzzy, c-format
+msgid "%s: cannot export"
+msgstr "%s: non é posíbel borrar"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "conta de shift"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "non é posíbel activar e desactivar opcións do shell simultaneamente"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: nome de opción do shell non válido"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "requírese un argumento de nome de ficheiro"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: non se atopou o ficheiro"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "non é posíbel suspender"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "non é posíbel suspender un shell de entrada"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s é un alias de `%s'\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s é unha palabra chave do shell\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s é unha función\n"
+
+#: builtins/type.def:299
+#, fuzzy, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s é unha orde interna do shell\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s é unha orde interna do shell\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s é %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s está asociado (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: límite de argumento non válido"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "`%c': orde errónea"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: non é posíbel obter o límite: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "límite"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: non é posíbel modificar o límite: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "número octal"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "`%c': operador de modo simbólico non válido"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "`%c': carácter de modo simbólico non válido"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " liña "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "última orde: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Abortando…"
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr ""
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "erro de orde descoñecido"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "tipo de orde erróneo"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "conector erróneo"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "salto erróneo"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: variable sen asignar"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\aexpirou mentres agardaba algunha entrada: auto-logout\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "non é posíbel redirixir a saída estándar desde /dev/null: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "TIMEFORMAT: `%c': carácter de formato non válido"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr ""
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "erro de canalización"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: restrinxido: non se pode especificar `/' en nomes de ordes"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: non se atopou a orde"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: intérprete erróneo"
+
+#: execute_cmd.c:5891
+#, fuzzy, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: non é posíbel executar o ficheiro binario"
+
+#: execute_cmd.c:5977
+#, fuzzy, c-format
+msgid "`%s': is a special builtin"
+msgstr "%s é unha orde interna do shell\n"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "no se pode duplicar o df %d ao df %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "excedeuse o nivel de recursión da expresión"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "desbordamento da base da pila de recursión"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "erro de sintaxe na expresión"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "tentouse asignar a algo que non é unha variábel"
+
+#: expr.c:530
+#, fuzzy
+msgid "syntax error in variable assignment"
+msgstr "erro de sintaxe na expresión"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "división entre 0"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "erro: elemento de asignación de expresión erróneo"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "agardábase `:' para a expresión condicional"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "expoñente menor que 0"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr ""
+"agardábase un identificador despois do pre-incremento ou pre-decremento"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "falta un `)'"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "erro de sintaxe: agardábase un operando"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "erro de sintaxe: operador aritmético non válido"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (o elemento de erro é \"%s\")"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "base aritmética non válida"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: conta de liñas non válida"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "valor demasiado grande para a base"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: erro de expresión\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: non é posíbel acceder aos directorios pai"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "non é posíbel restabelecer o modo nodelay para o df %d"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr ""
+"non é posíbel asignar un novo descritor de ficheiros para a entrada de bash "
+"desde o fd %d"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr ""
+"save_bash_input: o almacenamento intermedio xa existe para o novo fd %d"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: tubería de pgrp"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "o pid `forked' %d aparece no traballo en execución %d"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "borrando o trabajo detido %d con grupo de proceso %ld"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process: pid %5ld (%s) márcase como vivo aínda"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: non existe tal pid"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Sinal %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Feito"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Detido"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Detido(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "En execución"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Feito(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Saída %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Estado descoñecido"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(«core» xerado) "
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (dir agora: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "setpgid fillo (%ld a %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: pid %ld non é un proceso fillo desta shell"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: Non hai un rexistro do proceso %ld"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: o traballo %d está detido"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: non existe ese traballo"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: o traballo rematou"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: o trabajo %d xa está en segundo plano"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr "waitchld: actívase WNOHANG para evitar o bloque indefinido"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: liña %d: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " («core» generado)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(dir agora: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_jobs_control: fallou getpgrp"
+
+#: jobs.c:4447
+#, fuzzy
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_jobs_control: disciplina de liña"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_jobs_control: disciplina de liña"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_jobs_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "non é posíbel estabelecer o grupo de procesos de terminal (%d)"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "non hai control de trabalos nesta shell"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: fallou a aserción: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d: aserción arruinada\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "descoñecido"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: bloque na lista libre sobreescrito"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: chamouse cun argumento de bloque previamente liberado"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: chamouse cun argumento de bloque sen asignar"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: detectouse un desbordamento por embaixo; mh_nbytes fóra de rango"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: detectouse un desbordamento por embaixo; mh_nbytes fóra de rango"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: os tamaños dos anacos de inicio e fin son diferentes"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: chamouse cun argumento de bloque sen asignar"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr ""
+"realloc: detectouse un desbordamento por embaixo; mh_nbytes fóra de rango"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr ""
+"realloc: detectouse un desbordamento por embaixo; mh_nbytes fóra de rango"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: os tamaños dos anacos de inicio e fin son diferentes"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: a táboa alloc está chea con FIND_ALLOC?\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: %p xa está na táboa como asignado?\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: %p xa está na táboa como libre?\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "base non válida"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: anfitrión descoñecido"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: servizo non válido"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: especificación de ruta de rede errónea"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "non hai compatibilidade para operacións de rede"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL non se pode cambiar a configuración rexional (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr ""
+"setlocale: LC_ALL: non se pode cambiar a configuración rexional (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: non se pode cambiar a configuración rexional (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: non se pode cambiar a configuración rexional (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "Ten mensaxes en $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "Ten unha nova mensaxe en $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "O correo en %s foi lido\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "error de sintaxe: requírese unha expresión aritmética"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "error sintáctico: `;' non esperado"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "erro de sintaxe: `((%s))'"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: tipo de instrución %d erróneo"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr ""
+"o documento-aquí na liña %d está delimitado por fin-de-fichero (agardábase `"
+"%s')"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr "make_redirection: a instrucción de redirección `%d' está fóra de rango"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr ""
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "EOF inesperado mentres se buscaba un `%c' coincidente"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "EOF inesperado mentres se buscaba `]]'"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "error de sintaxe na expresión condicional: elemento inesperado `%s'"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "error sintáctico na expresión condicional"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "elemento inesperado `%s', agardábase `)'"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "agardábase `)'"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "argumento inesperado `%s' para o operador unario condicional"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "argumento inesperado para o operador unario condicional"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "elemento inesperado `%s', agardábase un operador binario condicional"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "agardábase un operador binario condicional"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "argumento inesperado `%s' para o operador binario condicional"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "argumento inesperado para o operador binario condicional"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "elemento inesperado `%c' na orde condicional"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "elemento inesperado `%s' na orde condicional"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "elemento inesperado %d na orde condicional"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "error de sintaxe perto do elemento inesperado `%s'"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "erro de sintaxe cerca de «%s»"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "error de sintaxe: non se agardaba o final do fichero"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "erro de sintaxe"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Use «%s» para deixar o shell.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "EOF non agardado mentres se buscaba un «)» coincidente"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "completion: non se atopa a función `%s'"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr ""
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: COMPSPEC nulo"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: conector erróneo `%d'"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: descriptor de fichero non válido"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: punteiro a ficheiro NULL"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != numfich xtrace fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: `%c': carácter de formato non válido"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "descritor de ficheiro fóra de rango"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: redireccionamento ambigüo"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: non se pode sobreescribir un fichero existente"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: restrinxido: no se pode redirixir a saída"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "non se pode crear un fichero temporal para o documento-aquí: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: non é posíbel asignar o gd á variábel"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "non se admite /dev/(tcp|udp)/anfitrion/porto sen rede"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "erro de redirección: non é posíbel duplicar o fd"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "non é posíbel atopar /tmp, por favor creeo!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp debe ser un nome de directorio válido"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr ""
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: opción non válida"
+
+#: shell.c:1319
+#, fuzzy, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "non é posíbel restabelecer o modo nodelay para o df %d"
+
+#: shell.c:1330
+#, fuzzy, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "non é posíbel restabelecer o modo nodelay para o df %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr ""
+
+#: shell.c:1632
+#, fuzzy, c-format
+msgid "%s: Is a directory"
+msgstr "%s: é un directorio"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "Non teño nome!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, versión %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Uso:\t%s [opción GNU longa] [opción] ...\n"
+"\t%s [opción GNU longa] [opción] guión-do-shell\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "Opcións GNU longas:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Opcións do shell:\n"
+
+#: shell.c:2043
+#, fuzzy
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-irsD o -c orde ou -O opcion_shopt\t\t(só invocación)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s ou -o opción\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+"Escriba `%s -c \"help set\"' para máis información sobre as opcións do "
+"shell.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr ""
+"Escriba `%s -c help' para máis información sobre as ordes internas do "
+"shell.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "Use a orden `bashbug' para reportar erros.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr ""
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr ""
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: operación non válida"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Sinal ambigüa"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Colgar"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Interromper"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Saír"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Instrución ilegal"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "BPT rastreo/captura"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "instrución ABORT"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "instrución EMT"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Excepción de coma flotante"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Matado"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Erro no bus"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Violación de segmento"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Chamada ao sistema errónea"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Tubería rota"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Temporizador"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Rematado"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Condicón de E/s urxente"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Detido (sinal)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Continúa"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "O proceso fillo morreu ou está parado"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Detido (entrada pola terminal)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Detido (saída pola terminal)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "E/S listas"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "Límite de CPU"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "Límite de ficheiros"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Alarma (virtual)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Alarma (contorno)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Xanela cambiada"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Bloqueo de gravación"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Sinal de usuario 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Sinal de usuario 2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "entrada de datos HFT pendente"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "fallo de enerxía inminente"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "caída do sistema inminente"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "migrando o proceso a outra CPU"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "erro de programación"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "o modo monitor HFT foi concedido"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "o modo monitor HTF foi retirado"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "a secuencia de son HFT foi completada"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "Solicitude de información"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "Sinal descoñecido #%d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "susbtitución errónea: non hai un `%s' que peche en %s"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: no é posíbel asignar unha lista a un membro da matriz"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "non é posíbel crear a tubería para a sustitución do proceso"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "non é posíbel crear un proceso fillo para a substitución do proceso"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "non é posíbel abrir a tubería chamada %s para lectura"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "non é posíbel abrir a tubería chamada %s para escritura"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "non é posíbel duplicar a tubería chamada %s como df %d"
+
+#: subst.c:6213
+#, fuzzy
+msgid "command substitution: ignored null byte in input"
+msgstr "substitución errónea: non hai unha \"`\" que peche en %s"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "non é posíble crear a tubería para a substitución da orde"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "non é posíbel crear un proceso fillo para a substitución da orde"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute: non é posíbel duplicar a tubería como fd 1"
+
+#: subst.c:6883 subst.c:9952
+#, fuzzy, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: %s: valor non válido para o descitor de ficheiro de rastreo"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, fuzzy, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: conta de liñas non válida"
+
+#: subst.c:7013 subst.c:7177
+#, fuzzy, c-format
+msgid "%s: invalid variable name"
+msgstr "`%s': nome de alias non válido"
+
+#: subst.c:7256
+#, fuzzy, c-format
+msgid "%s: parameter not set"
+msgstr "%s: parámetro nulo ou non estabelecido"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: parámetro nulo ou non estabelecido"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: expresión de subcadea < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: substitución errónea"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: non é posíbel asignar de esta forma"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+"versiones futuras do intérprete obligarán a evaluación como unha "
+"substitución aritmética"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "substitución errónea: non hai unha \"`\" que peche en %s"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "non hai concidencia: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "agardábase un argumento"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: agardábase unha expresión enteira"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "agardábase `)'"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "`)' agardábase, atopouse %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: agardábase un operador binario"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: agardábase un operador unario"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "falta un «]»"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "error sintáctico: `;' non esperado"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "número de sinal non válido"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr ""
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: valor erróneo en trap_list[%d]: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps: o manexador de sinal é SIG_DFL, reenviando %d (%s) a sí "
+"mesmo"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: sinal errónea %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "erro ao importar a definición da función para «%s»"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "o nivel de shell (%d) é demasiado alto, restabelécese a 1"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: non hai contexto de función no ámbito actual"
+
+#: variables.c:2693
+#, fuzzy, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: non é posíbel asignar o gd á variábel"
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr ""
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: non hai contexto de función no ámbito actual"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s ten exportstr nulo"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "carácter non válido %d en exportsrt para %s"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "non hai «=» en exportstr para %s"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr ""
+"pop_var_context: a cabezak de shell_variables non é un contexto de función"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: non é un contexto global_variables "
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr ""
+"pop_scope: a cabeza de shell_variables non é un ámbito de ambiente temporal"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: non é posíbel abrir como FICHEIRO"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: valor non válido para o descitor de ficheiro de rastreo"
+
+#: variables.c:6437
+#, fuzzy, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s fóra de rango"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Copyright (C) 2009 Free Software Foundation, Inc.\n"
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"Licenza GPLv3+: GPL de GNU versión 3 ou posterior <http://gnu.org/licenses/"
+"gpl.html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, versión %s (%s)\n"
+
+#: version.c:91 version2.c:91
+#, fuzzy
+msgid "This is free software; you are free to change and redistribute it."
+msgstr "Isto é software libre; vostede é libre de cambialo e redistribuilo.\n"
+
+#: version.c:92 version2.c:92
+#, fuzzy
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "Non hai GARANT�A, á extensión permitida pola ley.\n"
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: non é posíbel asignar %lu bytes (%lu bytes asignados)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: non é posíbel asignar %lu bytes"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: non é posíbel asignar %lu bytes (%lu bytes asignados)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: non é posíbel asignar %lu bytes"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [nome[=valor] ... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] nome [nome ...]"
+
+#: builtins.c:53
+#, fuzzy
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpvsPVS] [-m comb_teclas] [-f ficheiro] [-q nome] [-u nome] [-r "
+"secteclas] [-x secteclas:orde-shell] [keyseq:función-readline ou función-"
+"readline]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [orde-interna-shell [arg ...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [expresión]"
+
+#: builtins.c:66
+#, fuzzy
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]]] [directorio]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] orde [arg ...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilrtux] [-p] [nome[=valor] ...]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilrtux] [-p] nome[=valor] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [option] nome[=valor] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [arg ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [arg ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f nomeficheiro] [nome ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [arg ...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts cadena_opcións nome [arg]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a ome] [orde [argumentos ...]] [redirección ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr "fc [-e nome_e] [-lnr] [primeiro] [último] ou fc -s [pat=rep] [orde]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [id_traballo]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [id_traballo ...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p ruta] [-dt] [nome ...]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [patrón ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d desprazamento] [n] ou history -anrw [ficheiro] ou history -"
+"ps arg [arg...]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [idtraballo ...] ou jobs -x orde [args]"
+
+#: builtins.c:131
+#, fuzzy
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [id_traballo ...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s id_sinal | -n num_sinal | -id_sinal] pid | id_traballo ... ou kill -"
+"l [id_sinal]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let arg [arg ...]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a matriz] [-d delim] [-i texto] [-n ncars] [-N ncars] [-p "
+"prompt] [-t timeout] [-u fd] [nome ...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o nome-opción] [--] [arg ...]"
+
+#: builtins.c:144
+#, fuzzy
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [nome ...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [nome[=valor] ...] ou export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [nome[=valor] ...] ou readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source ficheiro [arguments]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". ficheiro [argumentos]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [expresión]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ arg... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[arg] id_sinal ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] nome [nome ...]"
+
+#: builtins.c:171
+#, fuzzy
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHacdefilmnpqrstuvx] [límite]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [modo]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [id]"
+
+#: builtins.c:181
+#, fuzzy
+msgid "wait [pid ...]"
+msgstr "wait [pid]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for NOME [in PALABRAS ... ] ; do ORDES; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( exp1; exp2; exp3 )); do ORDES; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select NOME [in PALABRAS ... ;] do ORDES; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] pipeline"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case PALABRA in [PATRÓN [| PATRÓN]...) ORDES ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr "if ORDES; then ORDES; [ elif ORDES; then ORDES; ]...[ else ORDES; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while ORDES; do ORDES; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until ORDES; do ORDES; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [NOME] orden [redireccións]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function nome { ORDES ; } ou nome () { ORDES ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ ORDES ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "job_spec [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( expresión ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ expresión ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "variables - Nomes e significados de algunhas variábeis de shell"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | dir]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [nome_opción ...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v var] formato [argumentos]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DE] [-o opción] [-A acción] [-G patglob] [-"
+"W listapalabras] [-F función] [-C orde] [-X patfiltro] [-P prefixo] [-S "
+"sufixo] [nome ...]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o opción]  [-A acción] [-G patglob] [-W "
+"listapalabras] [-F función] [-C orde] [-X patfiltro] [-P prefixo] [-S "
+"sufixo] [palabra]"
+
+#: builtins.c:239
+#, fuzzy
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o opción] [-DE] [nome ...]"
+
+#: builtins.c:242
+#, fuzzy
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-n conta] [-O orixe] [-s conta] [-t] [-u df] [-C chamada] [-c "
+"quantum] [matriz]"
+
+#: builtins.c:244
+#, fuzzy
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-n conta] [-O orixe] [-s conta] [-t] [-u df] [-C chamada] [-c "
+"quantum] [matriz]"
+
+#: builtins.c:256
+#, fuzzy
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Define ou mostra aliases.\n"
+"    \n"
+"    `alias' sen argumentos mostra a lista de aliases na forma\n"
+"    reutilizábel `alias NOMBRE=VALOR' na saída estándar.\n"
+"    \n"
+"    De outra maneira, defínese un alias por cada NOME cuxo VALOR se\n"
+"    forneza.  Un espazo final en VALOR causa que se revise\n"
+"    a seguinte palabra para substitución de alias cando se expande\n"
+"    o alias.\n"
+"    \n"
+"    Opciones:\n"
+"      -p\tMuestra todos los aliases definidos en un formato reusable\n"
+"    \n"
+"    Estado de salida:\n"
+"    alias devuelve verdadero a menos que se de un NOMBRE para el cual\n"
+"    no se haya definido ningún alias."
+
+#: builtins.c:278
+#, fuzzy
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Borra cada NOME da lista de alias definidos.\n"
+"    \n"
+"    Opcións:\n"
+"      -a\telimina todas as definicións de alias.\n"
+"    Devovle verdadero a menos que un NOME non sexa un alias existente."
+
+#: builtins.c:291
+#, fuzzy
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"Estabelece secuencias de teclas Readline e variábeis.\n"
+"\n"
+"    Asigna unha secuencia de teclas a unha función Readline ou a unha macro, "
+"ou\n"
+"    estabelece unha variábel Readline.  A sintaxe dos argumentos que\n"
+"    non son opcións é equivalente á que se encontra en ~/.inputrc,\n"
+"    pero débese pasar como un só argumento:\n"
+"    p.e., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    opcións:\n"
+"    \n"
+"      -m  comb_teclas    Usa COMB_TECLAS como a combinación de teclas pola\n"
+"                         duración desta orde.  Os nomes de combinacións\n"
+"                         de teclas aceptábeis son emacs, emacs-standard,\n"
+"                         emacs-meta, emacs-ctlx, vi, vi-move, vi-command e\n"
+"                         vi-insert.\n"
+"      -l                 Enlista os nomes das funcións.\n"
+"      -P                 Enlista os nomes das funcións e asignacións.\n"
+"      -p                 Enlista as funcións e asignacións nunha forma que\n"
+"                         se pode reusar como entrada.\n"
+"      -S                 Enlista as secuencias de teclas que invocan macros\n"
+"                         e os seus valores.\n"
+"      -s                 Enlista as secuencias de teclas que invocan macros\n"
+"                         e os seus valores nunha forma que se poden reusar "
+"como\n"
+"                         entrada.\n"
+"      -V                 Enlista os nomes de variábeis e valores.\n"
+"      -v                 Enlista os nomes de variábeis e valores nunha\n"
+"                         forma que se pode reusar como entrada.\n"
+"      -q nome-funcion    Pregunta qué teclas invocan a función nomeada.\n"
+"      -u nome-función    Borra todas as teclas que están ligadas\n"
+"                         á función nomeada.\n"
+"      -r secteclas       Borra a asignación para a SECTECLAS.\n"
+"      -f fichero         Lee as asignacións de teclas do FICHERO.\n"
+"      -x secteclas:orde-shell\tCausa que se execute a ORDE-SHELL cando\n"
+"    \t\t\t\tse introduce a SECTECLAS.\n"
+"    \n"
+"    Estado de saída:\n"
+"    bind devolve 0 a menos que se presente unha opción descoñecida ou se\n"
+"    se produza un erro."
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Termina ciclos for, while o until.\n"
+"    \n"
+"    Termina un ciclo FOR, WHILE o UNTIL.  Se se especifica N, remata\n"
+"    N ciclos anidados.\n"
+"    \n"
+"    Estado de saída:\n"
+"    O estado de saída é 0 a menos que N non sexa maior ou igual a 1."
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Continúa iteracións for, while o until\n"
+"    \n"
+"    Continúa a seguinte iteración do ciclo FOR, WHILE ou UNTIL\n"
+"    circundante.  Se se especifica N, retoma no N-ésimo ciclo circundante.\n"
+"    \n"
+"    Estado de Saída:\n"
+"    O estado de salida é 0 a menos que N non sexa maior ou igual a 1."
+
+#: builtins.c:354
+#, fuzzy
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Executa ordes internas do shell\n"
+"    \n"
+"    Executa a ORDEN-INTERNA-SHELL cos argumentos ARGs sen realizar\n"
+"    a busca interna de ordes.  Isto é útil cando desexa reimplementar\n"
+"    unha orde interna do shell como unha función de shell, pero necesita\n"
+"    executar a orde interna dentro da función.\n"
+"    \n"
+"    Estado de Saída:\n"
+"    Devolve o estado de saída da ORDE-INTERNA-SHELL, ou falso se a\n"
+"    ORDE-INTERNA-SHELL non é unha orde interna de shell."
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Devolve o contexto da chamada a subrutina actual.\n"
+"    \n"
+"    Sen EXPR, devolve \"$liña $nomeficheiro\".  Con EXPR, devolve\n"
+"    \"$liña $subrutina $nomeficheiro\"; esta información adicional\n"
+"    pódese usar para fornecer un volcado de pila.\n"
+"    \n"
+"    O valor de EXPR indica cantos marcos de chamada se debe retroceder\n"
+"    antes do actual; o marco inicial é o marco 0.\n"
+"    \n"
+"    Estado de Saída:\n"
+"    Devolve 0 a menos que o shell non estea executando unha función de "
+"shell\n"
+"    ou EXPR sexa non válida."
+
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+
+#: builtins.c:425
+#, fuzzy
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"Mostra o nome do directorio de traballo actual.\n"
+"    \n"
+"    Opcións:\n"
+"      -L\tmostra o valor de $PWD se nomea ao directorio de\n"
+"    \ttraballo actual\n"
+"      -P\tmostra o directorio físico, sen ligazóns simbólicas\n"
+"    \n"
+"    Por defecto, `pwd' comportase como se se especificara `-L'.\n"
+"    \n"
+"    Estado de Saída:\n"
+"    Devolve 0 a menos que se dea unha opción non válida ou non se poida "
+"leer\n"
+"    o directorio actual."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Orde nula.\n"
+"    \n"
+"    Sen efecto; a orde non fai nada.\n"
+"    \n"
+"    Estado de Saída:\n"
+"    Sempre con éxito."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Devolve un resultado con éxito.\n"
+"    \n"
+"    Estado de salida:\n"
+"    Sempre con éxito."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Devolve un resultado sen éxito.\n"
+"    \n"
+"    Estado de saída:\n"
+"    Sempre falla."
+
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+
+#: builtins.c:490
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+
+#: builtins.c:532
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"Estabelece valores de variábeis e atributos.\n"
+"    \n"
+"    Obsoleto.  Consulte `help declare'."
+
+#: builtins.c:540
+#, fuzzy
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Define variábeis locais.\n"
+"    \n"
+"    Crea unha variábel local chamada NOME, e dalle un VALOR.  OPCIÓN pode\n"
+"    ser calquera opción aceptada por `declare'.\n"
+"    \n"
+"    As variábeis locais só se pueden usar nunha función; son visibles\n"
+"    só na función onde se definen e os seus fillos.\n"
+"    \n"
+"    Estado de Saída:\n"
+"    Devolve con éxito a menos que se dea unha opción non válida, se produza\n"
+"    un erro, ou o shell non estea executando unha función."
+
+#: builtins.c:557
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Executa argumentos como unha orde de shell.\n"
+"    \n"
+"    Combina os ARGumentos nunha soa cadena, usa o resultado como entrada\n"
+"    para o shell, e executa as órdenes resultantes.\n"
+"    \n"
+"    Estado de saída:\n"
+"    Devolve o estado de saida da orde ou éxito se a orde é nula."
+
+#: builtins.c:652
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Remata a shell.\n"
+"    \n"
+"    Termina o shell cun estado de N.  Se se omite N, o estado de saída\n"
+"    é o mismo da última orde executada."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Termina un shell de entrada.\n"
+"    \n"
+"    Termina un shell de entrada cun estado de saída de N. Devolve un\n"
+"    erro se non se executa nunha shell de entrada."
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Move o trabañño ao primeiro plano.\n"
+"    \n"
+"    Localiza o traballo identificado con IDTRABALLO no primeiro plano, e\n"
+"    faino o traballo actual.  Se IDTRABALLO non está presente, úsase\n"
+"    a noción do shell do traballo actual.\n"
+"    \n"
+"    Estado de Saída:\n"
+"    O estado da orde localizada en primeiro plano, ou falla se sucede un "
+"erro."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Suspende a execución do shell.\n"
+"    \n"
+"    Suspende a execución deste shell até que recibe un sinal SIGCONT.\n"
+"    Os shells de entrada non se poden suspender, a menos que sexan "
+"forzados.\n"
+"    \n"
+"    Opcións:\n"
+"      -f\tforza a suspensión, aínda se o shell é un shell de entrada\n"
+"    \n"
+"    Estado de Saída:\n"
+"    Devolve con éxito a menos que non estea activo o control de traballos o\n"
+"    se produza un erro."
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Evalúa unha expresión condicional.\n"
+"    \n"
+"    Este é un sinónimo para a orde interna \"test\", pero o último\n"
+"    argumento debe ser un `]' literal, que coincida co `[' inicial."
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Mostra os tempos de proceso.\n"
+"    \n"
+"    Mostra os tempos de usuario e sistema acumulados polo shell e todos\n"
+"    os seus procesos fillos.\n"
+"    \n"
+"    Estado de saída:\n"
+"    Sempre con éxito."
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+
+#: builtins.c:1431
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+
+#: builtins.c:1502
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+
+#: builtins.c:1533
+#, fuzzy
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"Agarda a terminación do traballo e devolve o estado de saída.\n"
+"    \n"
+"    Espera ao proceso especificado e reporta o seu estado de saída.  Se\n"
+"    non se fornece un PID, agarda a todos os procesos fillo activos,\n"
+"    e o código de devolución é cero.  PID debe ser un ID de proceso.\n"
+"    \n"
+"    Estado de Saída:\n"
+"    Devolve o estado de ID; falla se ID non é válido ou se se fornece unha\n"
+"    opción non válida."
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Executa ordes por cada membro nunha lista.\n"
+"    \n"
+"    O ciclo `for' executa unha secuencia de ordes para cada membro nunha\n"
+"    lista de elementos.  Se `in PALABRAS ...;' non está presente,\n"
+"    entón asúmese `in \"$@\"'.  Para cada elemento en PALABRAS,\n"
+"    defínese NOME como ese elemento, e execútanse as ÓRDENES.\n"
+"    \n"
+"    Estado de Saída:\n"
+"    Devuelve o estado da última orden executada."
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Aritmética para un ciclo.\n"
+"    \n"
+"    Equivalente a\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tORDES\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, e EXP3 son expresións aritméticas.  Se se omite\n"
+"    calquera expresión, compórtase como se se evaluara a 1.\n"
+"    \n"
+"    Estado de saída:\n"
+"    Devolve o estado da última orde executada."
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Executa ordes en base á coincidencia de patróns.\n"
+"    \n"
+"    Executa ÓRDENES selectivamente baseado en coincidencias da PALABRA\n"
+"    co PATRÓN. Emprégase `|' para separar patróns múltiples.\n"
+"    \n"
+"    Estado de Saída:\n"
+"    Devolve o estado da última orde executada."
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Ejecuta ordes mentres unha proba teña éxito.\n"
+"    \n"
+"    Expande e executa ORDES mentres a orde final nas ÓRDENES\n"
+"    `while' teña un estado de saída de cero.\n"
+"    \n"
+"    Estado de Saída:\n"
+"    Devolve o estado da última orde executada."
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Executa ordes mentres unha proba non teña éxito.\n"
+"    \n"
+"    Expande e executa ORDES mentres a orde final nas ORDES\n"
+"    `until' teña un estado de saída que non sexa cero.\n"
+"    \n"
+"    Estado de Saída:\n"
+"    Devolve o estado da última orde executada."
+
+#: builtins.c:1671
+#, fuzzy
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"Crea un coproceso chamado NOME.\n"
+"    \n"
+"    Executa a ORDE asíncronamente, coa saída estándar e a entrada\n"
+"    estándar da orde contectada a través dunha tubería aos descritores\n"
+"    de ficheiro asignados aos índices 0 e 1 dunha variábel de matriz NOME\n"
+"    no shell en execución.  O nome por omisión é \"COPROC\".\n"
+"    \n"
+"    Estado de Saída:\n"
+"    Devolve o estado de saída da ORDE."
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Agrupa ordes como unha unidade.\n"
+"    \n"
+"    Executa un conxunto de ordes nun grupo.  Esta é unha forma de\n"
+"    redirixir un conxunto completo de ordes.\n"
+"    \n"
+"    Estado de Saída:\n"
+"    Devolve o estado da última orde executada."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Avalí unha expresión aritmética.\n"
+"    \n"
+"    Avalíase a EXPRESIÓN de acordo ás regras de evaluación\n"
+"    aritmética.  Equivalente a \"let EXPRESIÓN\".\n"
+"    \n"
+"    Estado de Saída:\n"
+"    Devolve 1 se a EXPRESIÓN avalía a 0; devovle 0 de outra maneira."
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+
+#: builtins.c:1821
+#, fuzzy
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Engade un directorio ao tope da rima de directorios, ou rota\n"
+"    a pila, facendo que o novo tope da rima sexa o\n"
+"    directorio de trabajo actual.  Sen argumentos, intercambia\n"
+"    os dous directorios do tope.\n"
+"    \n"
+"    Argumentos:\n"
+"    +N\tRota a pila para que o N-ésimo directorio (contando\n"
+"    \tda izquierda da lista mostrada por `dirs',\n"
+"    \tcomezando desde cero) estea no tope.\n"
+"    -N\tRota a pila para que o N-ésimo directorio (contando\n"
+"    \tda derecha da lista mostrada por `dirs',\n"
+"    \tcomezando desde cero) estea no tope.\n"
+"    \n"
+"     dir\tagrega DIR á rima de directorios no tope,\n"
+"    \tfacéndoo o novo directorio de traballo actual.\n"
+"    \n"
+"    A orde interna `dirs' mostra a rima de directorios."
+
+#: builtins.c:1855
+#, fuzzy
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Borra entradas da pila de directorios.  Sen argumentos, borra\n"
+"    directorio do tope da pila, e cambia ao novo directorio tope.\n"
+"    \n"
+"    Opcións:\n"
+"      -n\tsuprime o cambio normal de directorio cando se borra\n"
+"    \tdirectorios da pila, así só se manipula a pila.\n"
+"    \n"
+"    Argumentos:\n"
+"      +N\tBorra a N-ésima entrada contando da esquerda da\n"
+"    \tlista mostrada por `dirs', comenzando desde cero.\n"
+"    \tPor exemplo: `popd +0' borra o primeiro directorio, `popd +1'\n"
+"    \to segundo.\n"
+"    \n"
+"      -N\tBorra a N-ésima entrada contando da derecha da\n"
+"    \tlista mostrada por `dirs', comezando desde cero.\n"
+"    \tPor exemplo: `popd -0' borra o último directorio, `popd -1'\n"
+"    \to penúltimo.\n"
+"    \n"
+"    A orde interna `dirs' mostra a pila de directorios."
+
+#: builtins.c:1885
+#, fuzzy
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Mostra a lista de directorios actualmente gravados.  Os directorios\n"
+"    gárdanse na lista coa orde `pushd'; pode ir saíndo da\n"
+"    lista coa orde `popd'.\n"
+"    \n"
+"    Opcións:\n"
+"      -c\tlimpa a pila de directorios, eliminando todos os elementos\n"
+"      -l\tnon mostra as versións con prefixo de til dos directorios\n"
+"    \trelativos ao seu directorio inicial\n"
+"      -p\tmostra a pila de directorios cunha entrada por liña\n"
+"      -v\tmuestra a pila de directorios cunha entrada por liña coa\n"
+"    \tsúa posición na pila como prefixo\n"
+"    \n"
+"    Argumentos:\n"
+"      +N\tMostra a N-ésima entrada contando desde a esquerda da\n"
+"    \tlista mostrada por dirs cando se chama sen opcións,\n"
+"    \tcomezando desde cero.\n"
+"    \n"
+"      -N\tMostra a N-ésima entrada contando desde a dereita da\n"
+"\tlista mostrada por dirs cando se chama sen opcións,\n"
+"\tcomezando desde cero."
+
+#: builtins.c:1916
+#, fuzzy
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"Activa e desactiva opcións de shell.\n"
+"    \n"
+"    Cambia a configuración de cada opción de shell NOME_OPCIÓN. Sen\n"
+"    algunha opción como argumento, mostra todas as opcións de shell cunha\n"
+"    indicación se está activa ou non.\n"
+"    \n"
+"    Opcións:\n"
+"      -o\trestrinxe NOME_OPCIÓN a aqueles definidos con `set -o'\n"
+"      -p\tmostra cada opción de shell cun indicador do seu estado\n"
+"      -q\tsuprime a saída\n"
+"      -s\tactiva (estabelece) cada NOME_OPCIÓN\n"
+"      -u\tdesactiva (borra) cada NOME_OPCIÓN\n"
+"    \n"
+"    Estado de Saída:\n"
+"    Devolve con éxito se se activa NOME_OPCIÓN; falla se se fornece\n"
+"    unha opción non válida ou NOME_OPCIÓN está desactivado."
+
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+
+#: builtins.c:1971
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Mostra os posíbeis completados dependendo das opcións.\n"
+"    \n"
+"    Serve para usarse desde unha función de shell que xere completados\n"
+"    posíbeis.  Se se fornece o argumento opcional PALABRA, xéranse\n"
+"    as coincidencias contra PALABRA.\n"
+"    \n"
+"    Estado de Saída:\n"
+"    Devolve con éxito a menos que se forneza unha opción non válida o\n"
+"    se produza un erro."
+
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Lee liñas dun fichero nunha variábel de matriz.\n"
+"    \n"
+"    Un sinónimo de `mapfile'."
+
+#, fuzzy
+#~ msgid "Copyright (C) 2019 Free Software Foundation, Inc."
+#~ msgstr "Copyright (C) 2011 Free Software Foundation, Inc."
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "Devolve o contexto da chamada a subrutina actual.\n"
+#~ "    \n"
+#~ "    Sen EXPR, devovle "
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process: o proceso %5ld (%s) en the_pipeline"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "Sinal descoñecido #"
+
+#~ msgid ""
+#~ "License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl."
+#~ "html>\n"
+#~ msgstr ""
+#~ "Licenza GPLv2+: GPL de GNU versión 2 ou posterior <http://gnu.org/"
+#~ "licenses/gpl.html>\n"
+
+#~ msgid ":"
+#~ msgstr ":"
+
+#~ msgid "true"
+#~ msgstr "true"
+
+#~ msgid "false"
+#~ msgstr "false"
+
+#~ msgid "times"
+#~ msgstr "times"
diff --git a/po/hr.gmo b/po/hr.gmo
new file mode 100644
index 0000000..513672e
--- /dev/null
+++ b/po/hr.gmo
diff --git a/po/hr.po b/po/hr.po
new file mode 100644
index 0000000..08e5825
--- /dev/null
+++ b/po/hr.po
@@ -0,0 +1,5741 @@
+# Translation of bash to Croatian.
+# Copyright © 2018 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+#
+# Tomislav Krznar <tomislav.krznar@gmail.com>, 2012, 2013.
+# Božidar Putanec <bozidarp@yahoo.com>, 2018, 2019.
+msgid ""
+msgstr ""
+"Project-Id-Version: bash 5.0\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2020-11-22 13:25-0800\n"
+"Last-Translator: Božidar Putanec <bozidarp@yahoo.com>\n"
+"Language-Team: Croatian <lokalizacija@linux.hr>\n"
+"Language: hr\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
+"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+"X-Generator: Lokalize 2.0\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "nevaljani indeks polja"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr "%s: uklanja se atribut nameref"
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: nije moguće pretvoriti indeksirano u asocijativno polje"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: nevaljani klju� asocijativnoga polja"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: indeks mora biti numeri�ki"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr "%s: %s: mora se koristiti indeks pri dodijeli asocijativnoga polja"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: nije moguće napraviti: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr "bash_execute_unix_command: nije moguće pronaći keymap za naredbu"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: prvi znak, koji nije bjelina, nije „\"“"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "nema zaklju�noga „%c“ u %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: nema razdjelnika dvoto�ke"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "„%s“: nije moguće razvezati"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr ""
+"brace expansion: nije moguće dodijeliti memoriju za %s\n"
+"(primjer ekspanzije unutar viti�astih zagrada: echo a{d,c}e -> ade, ace)"
+
+# Brace expansion is a mechanism by which arbitrary strings may be generated
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr ""
+"brace expansion: nije uspjelo dodijeliti memoriju za %u elemenata\n"
+"(primjer ekspanzije unutar viti�astih zagrada: echo a{d,c}e -> ade, ace)"
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr ""
+"brace expansion: nije uspjelo dodijeliti memoriju za „%s“\n"
+"(primjer ekspanzije unutar viti�astih zagrada: echo a{d,c}e -> ade, ace)"
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "„%s“: nevaljano ime aliasa"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "redigiranje retka nije omogućeno"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "„%s“: nevaljano ime za keymap"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: nije moguće pro�itati: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "„%s“: nepoznato ime funkcije"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s nije vezano s nijednom tipkom.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s se može pozvati pomoću "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "„%s“: nije moguće razvezati"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "broja� ponavljanja"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "ima zna�enje samo u „for“, „while“ ili „until“ petljama"
+
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Vrati kontekst trenutnog poziva potprogramu.\n"
+"\n"
+"    Bez IZRAZA, vrati „$line $filename“. Ako je dȃn IZRAZ, vrati\n"
+"    „$line $subroutine $filename“; ova dodatna informacija može poslužiti\n"
+"    za „stack trace“.\n"
+"\n"
+"    Vrijednost IZRAZA pokazuje koliko se treba vratiti unatrag od\n"
+"    trenutne pozicije, s time da je pozicija 0 trenutna pozicija.\n"
+"\n"
+"    Završi s k�dom 0 osim ako ljuska ne izvršava ljuskinu funkciju\n"
+"    ili je IZRAZ nevaljani."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "HOME varijabla nije definirana"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "previše argumenata"
+
+#: builtins/cd.def:342
+msgid "null directory"
+msgstr "null direktorij"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "OLDPWD nije postavljeni"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "redak %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "upozorenje: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: uporaba: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: opcija zahtijeva argument"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: zahtijeva se numeri�ki argument"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: nije pronađeno"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: nevaljana opcija"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: nevaljano ime opcije"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "„%s“: nije valjani identifikator"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "nevaljani oktalni broj"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "nevaljani heksadecimalni broj"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "nevaljani broj"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: nevaljana specifikacija signala"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "„%s“: nije PID ili valjani pokazatelj posla"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: varijabla samo za �itanje"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s je izvan raspona"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "argument"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s je izvan raspona"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: nema takvoga posla"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: nema kontrole nad poslovima u ovoj ljuski"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "nema kontrole nad poslovima u ovoj ljuski"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: ograni�eni na�in"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "ograni�eni na�in"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: nije ugrađena bash naredba"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "greška pri pisanja: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "greška pri postavljanju svojstava terminala: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "greška pri preuzimanju svojstava terminala: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: nije moguće pronaći trenutni direktorij: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: višezna�ni pokazatelj posla"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr "u ovoj ina�ici pomoć nije ugrađena"
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: nije moguće poništiti: %s je moguće samo �itati"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: nije moguće poništiti"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: nevaljano ime za akciju"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: dovršavanje nije specificirano"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "upozorenje: opcija -F možda neće raditi prema o�ekivanju"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "upozorenje: opcija -C možda neće raditi prema o�ekivanju"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "trenutno se ne izvršava funkcija kompletiranja"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "može se koristiti samo u funkciji"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr "%s: referentna varijabla ne može biti polje"
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr "%s: varijabla nameref ukazuje na samu sebe, a to nije dopušteno"
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s: kružna referencija na ime"
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "„%s“: nevaljano ime varijable za referenciju na ime"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "„-f“ se ne može koristiti za definiranje funkcije"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: funkcija samo za �itanje"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr "%s: dodjeljivanje citiranoga složenog polja je zastarjelo"
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: nije moguće uništiti varijable polja na ovaj na�in"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: nije moguće pretvoriti asocijativno u indeksirano polje"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "dinami�ko u�itavanje nije dostupno"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "nije moguće otvoriti dijeljeni objekt %s: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "nije moguće pronaći %s u dijeljenom objektu %s: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: nije dinami�ki u�itan"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr "funkcija u�itavanja za %s završila je s  pogreškom (%d): nije u�itano"
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: nije dinami�ki u�itan"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: nije moguće izbrisati: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: to je direktorij"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: nije obi�na datoteka"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: datoteka je prevelika"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: nije moguće izvršiti binarnu datoteku"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: nije moguće izvršiti: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "odjava\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "nije prijavna ljuska: odjavite se s „exit“"
+
+# stopped > pauzirano ili zaustavljeno
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Ima zaustavljenih poslova.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Ima pokrenutih poslova.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "naredba nije pronađena"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "prikaz povijesti naredbi"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: nije moguće otvoriti privremenu datoteku: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "trenutno"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "posao %d je pokrenut bez kontrole nad njim"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: nedopuštena opcija -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: opcija zahtijeva argument -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "hash-tablica je onemogućena"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: hash-tablica je prazna\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "pogodci\tnaredba\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Naredba koja odgovara klju�noj rije�i „"
+msgstr[1] "Naredbe koje odgovaraju klju�nim rije�ima „"
+msgstr[2] "Naredbi koje odgovaraju klju�nim rije�ima „"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"nisu pronađene teme pomoći za „%s“. Pokušajte s „help help“, „man -k %s“ ili "
+"„info %s“."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: nije moguće otvoriti: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Ove bash naredbe su interno definirane. Upišite „help“ za prikaz popisa.\n"
+"Upišite „help ime“ za više podataka o funkciji „ime“.\n"
+"Koristite „info bash“ za više općenitih podataka o ljusci.\n"
+"Koristite „man -k“ ili „info“ za više podataka o naredbama izvan ovog "
+"popisa.\n"
+"\n"
+"Zvjezdica (*) pokraj imena ozna�ava onemogućenu naredbu.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "smije se rabiti samo jedna od opcija -anrw"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "mjesto u povijesti naredbi"
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: nevaljani vremenski žig"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: proširenje povijesti nije uspjelo"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: inlib nije uspio"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "nisu dopuštene druge opcije uz „-x“"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: argumenti moraju biti ID-ovi procesa ili posla"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Nepoznata greška"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "o�ekivao se izraz"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: nije indeksirano polje"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: nevaljana specifikacija deskriptora datoteke"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: nevaljani deskriptor datoteke: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: nevaljani koli�ina redaka"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: nevaljani po�etak polja"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: nevaljana koli�ina od callback"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "prazno ime varijable polja"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "potrebna podrška varijable polja nije podržana u ovoj ljusci"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "„%s“: nedostaje znak za format"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "„%c“: nevaljana specifikacija za format vremena"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "„%c“: nevaljani znak za format"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "upozorenje: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "greška pri analizi: %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "nedostaje heksadecimalna znamenka za \\x"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "nedostaje unicode znamenka za \\%c"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "nema drugog direktorija"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s: nevaljani argument"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<nema trenutnog direktorija>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "snop direktorija je prazan"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "indeks snopa direktorija"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Pokaže popis trenutno zapamćenih direktorija. Direktoriji se unose\n"
+"    na popis pomoću naredbe „pushd“, a s naredbom „popd“ se uklanjaju.\n"
+"\n"
+"    Opcije:\n"
+"      -c   po�isti snop direktorija brisanjem svih elemenata\n"
+"      -l   ispiše apsolutne staze direktorija u odnosu na osobni\n"
+"             direktorij (ne skraćuje staze upotrebom tilde)\n"
+"      -p   ispiše sadržaj snopa po jedan direktorij po retku\n"
+"      -v   kao „-p“, ali s prefiksom koji pokazuje\n"
+"             poziciju direktorija snopu\n"
+"\n"
+"    Argumenti:\n"
+"      +N   Pokaže N-ti direktorij iz snopa, brojeći od od nule s\n"
+"             lijeve strane popisa k�d se „dirs“ pokrene bez opcija.\n"
+"      -N   Pokaže N-ti direktorij iz snopa, brojeći od nule s\n"
+"             desne strane popisa k�d se „dirs“ pokrene bez opcija."
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Doda direktorij na vrh snopa direktorija ili zarotira snop tako da\n"
+"    u�ini novi vrh snopa trenutnim radnim direktorijem. Bez argumenata\n"
+"    razmijeni pozicije dva direktorija na vrhu snopa.\n"
+"\n"
+"    Opcije:\n"
+"      -n   izostavi uobi�ajenu promjenu direktorija k�d dodaje\n"
+"           direktorije u snop, odnosno samo manipulira sa snopom\n"
+"\n"
+"     Argumenti:\n"
+"      +N   Zarotira snop tako, da N-ti direktorij u snopu (brojeći od nule "
+"s\n"
+"             lijeve strane popisa prikazanoga s „dirs“) postane novi vrh "
+"snopa.\n"
+"      -N   Zarotira snop tako, da N-ti direktorij u snopu (brojeći od nule "
+"s\n"
+"             desne strane popisa prikazanoga s „dirs“) postane novi vrh "
+"snopa.\n"
+"      DIREKTORIJ  Doda DIREKTORIJ na vrh snopa direktorija i\n"
+"                    u�ini ga novim trenutnim radnim direktorijem.\n"
+"\n"
+"      Naredba „dirs“ prikaže trenutni sadržaj snopa direktorija."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Ukloni direktorije iz snopa direktorija. Bez argumenata, ukloni\n"
+"    direktorij na vrhu snopa i premjesti se u novi najviši direktorij.\n"
+"\n"
+"    Opcije:\n"
+"      -n   izostavi uobi�ajenu promjenu direktorija k�d uklanja\n"
+"           direktorije iz snopa, odnosno samo manipulira sa snopom\n"
+"\n"
+"    Argumenti:\n"
+"      +N   Ukloni da N-ti direktorij iz snopa brojeći od nule s lijeve\n"
+"           strane popisa prikazanoga s „dirs“. Na primjer: „popd +0“\n"
+"           ukloni prvi, a „popd +1“ ukloni drugi direktorij.\n"
+"      +N   Ukloni da N-ti direktorij iz snopa brojeći od nule s desne\n"
+"           strane popisa prikazanoga s „dirs“. Na primjer.: „popd -0“\n"
+"           ukloni zadnji, a „popd -1“ ukloni predzadnji direktorij.\n"
+"\n"
+"    Naredba „dirs“ prikaže trenutni sadržaj snopa direktorija."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: nevaljana specifikacija za istek vremena"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "greška pri �itanju: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr "„return“ je mogući samo iz funkcije ili iz pokrenute skripte"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "nije moguće istovremeno poništiti funkciju i varijablu"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: nije varijabla polja"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: nije funkcija"
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr "%s: nije moguće eksportirati"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "broja� pomaka"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "nije moguće istovremeno postaviti i poništiti opcije ljuske"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: nevaljano ime za opciju ljuske"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "zahtijeva se ime datoteke kao argument"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: datoteka nije pronađena"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "obustava nije moguća"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "nije moguće obustaviti prijavnu ljusku"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s je alias za „%s“\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s je klju�na rije� ljuske\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s je funkcija\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s je specijalna ugrađena funkcija ljuske\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s je ugrađena funkcija ljuske\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s je %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "za %s izra�unata hash vrijednost (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: nevaljani argument za ograni�enje"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "„%c“: loša naredba"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: nije moguće dobiti ograni�enje: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "ograni�enje"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: nije moguće promijeniti ograni�enje: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "oktalni broj"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "„%c“: nevaljani operator u simboli�kom na�inu"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "„%c“: nevaljani znak u simboli�kom na�inu"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " redak "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "posljednja naredba: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Prekida se..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr "informacije: "
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "nepoznata greška naredbe"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "loša vrsta naredbe"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "loš konektor"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "loši skok"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: nepovezana varijabla"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\avrijeme �ekanja na ulaz je isteklo: automatska-odjava\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "nije moguće preusmjeriti standardni ulaz iz /dev/null: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "TIMEFORMAT: „%c“: nevaljani znak za format"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr "execute_coproc(): coproc [%d:%s] još uvijek postoji"
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "greška cijevi"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr "eval: prekora�ena je dopuštena razina eval gniježđenja (%d)"
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr "%s: prekora�ena je dopuštena razina source gniježđenja (%d)"
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr "%s: prekora�ena je dopuštena razina gniježđenja funkcije (%d)"
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: ograni�eni na�in: znak „/“ nije dopušten u imenima naredba"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: naredba nije pronađena"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: loši interpreter"
+
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: binarnu datoteku %s nije moguće pokrenuti/izvršiti"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "„%s“ je specijalna funkcija ugrađena u ljusku"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "nije moguće kopirati deskriptor datoteke %d u deskriptor datoteke %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "izraz ima preveliki broj rekurzija"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "snop rekurzija je prazan"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "sintakti�ka greška u izrazu"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "vrijednost se može dodijeliti samo varijabli"
+
+#: expr.c:530
+msgid "syntax error in variable assignment"
+msgstr "sintakti�ka greška u zadavanju varijable"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "dijeljenje s 0"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "**interna greška** : loši token u izrazu za dodjelu"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "znak „:“ je nužan u uvjetnom izrazu"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "eksponent je manji od 0"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "nakon pre-increment ili pre-decrement o�ekuje se identifikator"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "nema „)“"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "sintakti�ka greška: o�ekivao se operand"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "sintakti�ka greška: nevaljani aritmeti�ki operator"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (simbol greške je „%s“)"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "nevaljana aritmeti�ka baza"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: nevaljani koli�ina redaka"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "vrijednost baze je prevelika"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: greška u izrazu\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd(): nije moguće pristupiti nadređenim direktorijima"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "ne može se onemogućiti nodelay na�in za deskriptor datoteke %d"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr "nije moguće dodijeliti novi datote�ni deskriptor za bash ulaz iz fd %d"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input(): međuspremnik već postoji za novi fd %d"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline(): pgrp pipe (procesna grupa cijevi)"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "potproces PID %d javlja se u pokrenutom poslu %d"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "uklanja se zaustavljeni posao %d s grupom procesa %ld"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process(): PID %5ld (%s) ozna�en kao još uvijek aktivan"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid(): %ld: PID ne postoji"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Signal %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Gotovo"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Zaustavljeno"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Zaustavljeno(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "Pokrenuto"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Gotovo(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Završi %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Nepoznati status"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(**krah**: stanje (dump) memorije je zapisano!) "
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (wd: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "postavljanje procesne grupe %2$ld od potomka %1$ld"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: PID %ld nije potomak ove ljuske"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: nema zapisa o procesu %ld"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: posao %d je zaustavljen"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: nema takvoga posla"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: posao je prekinut"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: posao %d je već u pozadini"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr "waitchld(): omogući WNOHANG da se izbjegne neodređeno blokiranje"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: redak %d: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (**krah**: stanje (dump) memorije je zapisano!)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(radni direktorij je sada: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: neuspješni getpgrp()"
+
+#: jobs.c:4447
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: nema kontrole nad pozadinskim poslovima"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: line discipline"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid()"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "nije moguće postaviti procesnu grupu (%d) terminala"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "nema kontrole nad poslovima u ovoj ljusci"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc(): neuspješni kontrolni test: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc(): %s:%d: loše provedena proba\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "nepoznato"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc(): prepisani je blok na popisu slobodne memorije"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free(): pozvan s argumentom za već slobodni memorijski blok"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free(): pozvan s argumentom za ne dodijeljeni memorijski blok"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free(): otkriveni je podljev, mh_nbytes ispod granica"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free(): otkriveni je podljev, mh_nbytes ispod granica"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free(): veli�ine segmenta od po�etka i kraja su razli�ite"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc(): pozvan s argumentom za ne dodijeljeni memorijski blok"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc(): otkriveni je podljev, mh_nbytes ispod granica"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc(): otkriveni je podljev, mh_nbytes ispod granica"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc(): veli�ine segmenta od po�etka i kraja su razli�ite"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc(): rezervacijska tablica je popunjena s FIND_ALLOC??\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc(): %p je već rezervirani u tablici??\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free(): %p je već slobodan u tablici??\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "nevaljana baza"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: nepoznato ra�unalo"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: nevaljani servis"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: loša specifikacija za mrežnu stazu"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "mrežne operacije nisu podržane"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale(): LC_ALL: nije moguće promijeniti jezi�no podru�je (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale(): LC_ALL: nije moguće promijeniti jezi�no podru�je (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale(): %s: nije moguće promijeniti jezi�no podru�je (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale(): %s: nije moguće promijeniti jezi�no podru�je (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "Imate poštu u $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "Imate novu poštu u $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "Pošta u %s je već pro�itana\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "sintakti�ka greška: zahtijeva se aritmeti�ki izraz"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "sintakti�ka greška: neo�ekivani „;“ znak"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "sintakti�ka greška: „((%s))“"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document(): loša vrsta instrukcije %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr "redak %d od here-document ima za razdjelnik EOF (o�ekuje se „%s“)"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr ""
+"make_redirection(): instrukcija za preusmjeravanje „%d“ je izvan raspona"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+"shell_getc(): shell_input_line_size (%zu) je veća od SIZE_MAX (%lu): "
+"skraćuje se"
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr "maksimalni broj za here-document je prekora�eni"
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "neo�ekivani EOF pri traženju odgovarajućeg „%c“"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "neo�ekivani EOF pri traženju „]]“"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "sintakti�ka greška u uvjetnom izrazu: neo�ekivani token „%s“"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "sintakti�ka greška u uvjetnom izrazu"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "neo�ekivani token „%s“ umjesto o�ekivane „)“"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "o�ekivana je „)“"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "neo�ekivani argument „%s“ uvjetnom unarnom operatoru"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "neo�ekivani argument za uvjetni unarni operator"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "neo�ekivani token „%s“; o�ekivan je uvjetni binarni operator"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "o�ekivan je uvjetni binarni operator"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "neo�ekivani argument „%s“ za uvjetni binarni operator"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "neo�ekivani argument za uvjetni binarni operator"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "neo�ekivani token „%c“ u uvjetnoj naredbi"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "neo�ekivani token „%s“ u uvjetnoj naredbi"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "neo�ekivani token %d u uvjetnoj naredbi"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "sintakti�ka greška blizu neo�ekivanog tokena „%s“"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "sintakti�ka greška blizu „%s“"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "sintakti�ka greška: neo�ekivani kraj datoteke"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "sintakti�ka greška"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Koristite \"%s\" da napustite ljusku.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "neo�ekivani EOF pri traženju odgovarajuće „)“"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "completion(): funkcija „%s“ nije pronađena"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr "programmable_completion(): %s: moguća je beskona�na petlja"
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert(): %s: prazni COMPSPEC"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command(): loši konektor „%d“"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set(): %d: nevaljani deskriptor datoteke"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set(): prazni pokaziva� na datoteku"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != fileno xtrace fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf(): „%c“: nevaljani znak za format"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "deskriptor datoteke je izvan raspona"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: višezna�no preusmjeravanje"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: nije moguće pisati preko postojeće datoteke"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: ograni�eno: nije moguće preusmjeriti izlaz"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "nije moguće napraviti privremenu datoteku za here-document: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: nije moguće dodijeliti deskriptor datoteke varijabli"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "/dev/(tcp|udp)/host/port nije podržan bez umrežavanja"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "greška  preusmjeravanja: nije moguće kopirati deskriptor datoteke"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "nije moguće pronaći /tmp; napravite taj direktorij!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp mora biti valjano ime direktorija"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr "u interaktivnoj ljusci pretty-printing se ignorira"
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: nevaljana opcija"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "nije moguće postaviti UID na %d: efektivni UID je %d"
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "nije moguće postaviti GID na %d: efektivni GID je %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr "nije moguće pokrenuti debugger; debugiranje je onemogućeno"
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr "%s: to je direktorij"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "Nemam ime!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, ina�ica %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Uporaba: %s [GNU duga�ka opcija] [opcija] ...\n"
+"         %s [GNU duga�ka opcija] [opcija] skripta ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "GNU duga�ke opcije:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Opcije ljuske:\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-ilrsD ili -c NAREDBA ili -O SHOPT-OPCIJA    (samo za pokretanje)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s ili -o opcija\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+"„%s -c \"help set\"“  pokaže vam dodatne informacije o opcijama ljuske.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr ""
+"„%s -c help set“  pokaže vam više informacija o ugrađenim funkcijama "
+"ljuske.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "Koristite naredbu „bashbug“ za prijavljivanje grešaka.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr "bash Web stranica: <http://www.gnu.org/software/bash>\n"
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr ""
+"Općenita pomoć za korištenje GNU softvera: <http://www.gnu.org/gethelp/>\n"
+"Prijavite primjedbe i greške u prijevoda na lokalizacija@linux.hr/\n"
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask(): %d: nevaljana operacija"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Lažni signal"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Poklopi"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Prekini"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Završi"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Nedopuštena instrukcija"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "BPT trag/zamka instrukcija (Trace/Breakpoint trap)"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "ABORT instrukcija"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "EMT instrukcija"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Iznimka (broja) s pomi�nim zarezom"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Ubijen"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Greška sabirnice"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Segmentacijska greška"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Loši sustavski poziv"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Prekinuta cijev"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Budilica"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Završeno"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Hitno U/I stanje"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Zaustavljeno (signalom)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Nastavljanje"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Potomak-proces ubijen ili zaustavljen"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Zaustavljen (tty ulaz)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Zaustavljen (tty izlaz)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "U/I je spreman"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "Ograni�enje procesora"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "Ograni�enje datoteke"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Alarm (virtualni)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Alarm (profil)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Prozor promijenjen"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Zapis zaklju�an"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Korisni�ki signal 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Korisni�ki signal 2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "HFT ulazni podaci �ekaju"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "nestanak struje je neizbježan"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "rušenje sustava je neizbježno"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "preseli proces na drugi procesor"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "greška programiranja"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "HFT nadzor dopušten"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "HFT nadzor oduzet"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "HFT sekvencija zvukova je završena"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "Zahtjev za informacijom"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "Nepoznati signal #%d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "loša supstitucija: nema zaklju�noga „%s“ u %s"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: nije moguće dodijeliti popis elementu polja"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "nije moguće napraviti cijev za zamjenu procesa"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "nije moguće napraviti potomka za zamjenu procesa"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "nije moguće otvoriti imenovanu cijev %s za �itanje"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "nije moguće otvoriti imenovanu cijev %s za pisanje"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "nije moguće kopirati imenovanu cijev %s kao deskriptor datoteke %d"
+
+#: subst.c:6213
+msgid "command substitution: ignored null byte in input"
+msgstr "nevaljana supstitucija: ignorirani NULL bajt na ulazu"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "nije moguće napraviti cijev za zamjenu naredbi"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "nije moguće napraviti potomka za zamjenu naredbi"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr ""
+"command_substitute(): nije moguće kopirati cijev kao deskriptor datoteke 1"
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: nevaljano ime varijable za naziv referencije"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: nevaljana indirektna ekspanzija"
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr "„%s“: nevaljano ime varijable"
+
+#: subst.c:7256
+#, c-format
+msgid "%s: parameter not set"
+msgstr "%s: parametar nije postavljen"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: prazni parametar ili nije postavljen"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: rezultat od izraza dijela stringa < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: loša supstitucija"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: nije moguće dodijeliti na ovaj na�in"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+"buduće ina�ice ljuske će prisiliti procjenu kao aritmeti�ku supstituciju"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "loša supstitucija: nema zaklju�noga znaka „`“ u %s"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "nema podudaranja: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "o�ekuje se argument"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: o�ekuje se cijelo brojni izraz"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "o�ekivana je „)“"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "o�ekuje se „)“, nađen %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: o�ekivan je binarni operator"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: o�ekivan je unarni operator"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "nedostaje „]“"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "sintakti�ka greška: neo�ekivani „;“ znak"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "nevaljani broj za signal"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr "trap handler: prekora�ena je dopuštena razina gniježđenja (%d)"
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps(): loša vrijednost u trap_list[%d]: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps: signalom manipulira SIG_DFL, opet Å¡alje %d (%s) na samoga "
+"sebe"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler(): loši signal %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "greška pri importiranju definicije funkcije za „%s“"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "razina ljuske (%d) je previsoka, vraća se na 1"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable(): u trenutnom podru�ju nema konteksta funkcije"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: varijabli se ne može dodijeliti vrijednost"
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr "%s: nazivu referencije se pripisuje cijeli broj"
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables(): u trenutnom podru�ju nema konteksta funkcije"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "*** %s ima prazni exportstr"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "*** nevaljani znak %d u exportstr za %s"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "*** nema „=“ u exportstr za %s"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr "pop_var_context(): vrh od „shell_variables“ nije funkcijski kontekst"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context(): nije „global_variables“ kontekst"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr "pop_scope(): vrh od „shell_variables“ nije privremeni kontekst okoline"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: nije moguće otvoriti kao DATOTEKU"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: nevaljana vrijednost za praćenje deskriptora datoteke"
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s vrijednost za kompatibilnost je izvan raspona"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Copyright © 2009 Free Software Foundation, Inc.\n"
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"Licencija:\n"
+"GPLv3+: GNU GPL ina�ica 3 ili novija <http://gnu.org/licenses/gpl.html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, ina�ica %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr "Ovo je slobodan softver: slobodno ga mijenjajte i dijelite."
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "NEMA JAMSTVA do granica dopuštenih zakonom."
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: nije moguće dodijeliti %lu bajtova (dodijeljeno je %lu bajtova)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: nije moguće dodijeliti %lu bajtova"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr ""
+"%s: %s:%d: nije moguće dodijeliti %lu bajtova (dodijeljeno je %lu bajtova)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: nije moguće dodijeliti %lu bajtova"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [IME[=VRIJEDNOST]... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] IME..."
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpsvPSVX] [-m TIPKOVNICA] [-f DATOTEKA] [-q IME] [-u IME]\n"
+"           [-r PREÄŒAC] [-x PREÄŒAC:SHELL_NAREDBA]\n"
+"           [PREÄŒAC:READLINE_FUNKCIJA | READLINE_NAREDBA]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [N]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [N]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [UGRA�ENA_SHELL_FUNKCIJA [ARGUMENT...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [IZRAZ]"
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]] [-@]] [DIREKTORIJ]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] NAREDBA [ARGUMENT...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilnrtux] [-p] [IME[=VRIJEDNOST]...]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilnrtux] [-p] IME[=VRIJEDNOST]..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [OPCIJA] IME[=VRIJEDNOST]..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [ARGUMENT...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [ARGUMENT...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f DATOTEKA] [IME...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [ARGUMENT...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts OPCIJA_STRING IME [ARGUMENT]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a IME] [NAREDBA [ARGUMENT...]] [PREUSMJERAVANJE...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [N]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [N]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr ""
+"fc [-e EDITOR] [-lnr] [PRVA] [ZADNJA] ili: fc -s [UZORAK=ZAMJENA] [NAREDBA]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [JOBSPEC]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [JOBSPEC...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p IME_STAZE] [-dt] [IME...]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [UZORAK ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d POZICIJA] [N]\n"
+"    ili: history -anrw [DATOTEKA]\n"
+"    ili: history -ps ARGUMENT..."
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [JOBSPEC...] ili: jobs -x NAREDBA [ARGUMENT...]"
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [JOBSPEC... | PID...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s SIGSPEC | -n SIGNUM | -SIGSPEC] pid | JOBSPEC\n"
+" ili: kill -l [SIGSPEC]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let ARGUMENT..."
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a POLJE] [-d ME�A] [-i TEKST] [-p PROMPT]\n"
+"           [-n BROJ_ZNAKOVA] [-N BROJ_ZNAKOVA] [-t SEKUNDA]\n"
+"           [-u FD] [IME...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [N]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o IME_OPCIJE] [--] [ARGUMENT...]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [IME...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [IME[=VRIJEDNOST]...] ili: export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [IME[=VRIJEDNOST]...] ili: readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [N]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source DATOTEKA [ARGUMENTI]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". DATOTEKA [ARGUMENTI]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [IZRAZ]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ ARGUMENT... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[ARGUMENT] SIGNAL_SPEC...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] IME..."
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [LIMIT]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [MODE]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-fn] [ID...]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [PID...]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for IME [in RIJEÄŒIMA...]; do NAREDBE; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( IZRAZ_1; IZRAZ_2; IZRAZ_3 )); do NAREDBE; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select IME [in RIJEÄŒIMA...;]; do NAREDBE; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] CJEVOVOD"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case RIJEČ in [UZORAK [| UZORAK]...) NAREDBE;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if NAREDBE; then NAREDBE; [elif NAREDBE; then NAREDBE;]... [else NAREDBE;]\n"
+"    fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while NAREDBE; do NAREDBE; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until NAREDBE; do NAREDBE; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [IME] NAREDBA [PREUSMJERAVANJA]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function IME {NAREDBE;} ili: IME () {NAREDBE;}"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ NAREDBE; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "JOBSPEC [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( IZRAZ ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "(( IZRAZ ))"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "varijable — imena i zna�enje nekih varijabla ljuske"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | DIREKTORIJ]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [IME_OPCIJE...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v VARIJABLA] FORMAT [ARGUMENTI]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o OPCIJA] [-A AKCIJA]\n"
+"                   [-C NAREDBA] [-F FUNCIJA] [-G GLOB_UZORAK] [-P PREFIKS]\n"
+"                   [-S SUFIKS] [-W POPIS_RIJEÄŒI] [-X FILTAR_UZORAKA] [IME...]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o OPCIJA] [-A AKCIJA] [-C NAREDBA]\n"
+"                 [-F FUNCIJA] [-G GLOB_UZORAK] [-P PREFIKS] [-S SUFIKS]\n"
+"                 [-W POPIS_RIJEČI] [-X FILTAR_UZORAKA] [RIJEČ]"
+
+#: builtins.c:239
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o OPCIJA] [-DEI] [IME...]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-d ME�A] [-n BROJ] [-O POČETAK] [-s BROJ] [-t] [-u FD]\n"
+"                 [-C FUNKCIJA] [-c TOLIKO] [POLJE]"
+
+#: builtins.c:244
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-d DELIM] [-n BROJ] [-O POÄŒETAK] [-s BROJ] [-t] [-u FD]\n"
+"                     [-C FUNKCIJA] [-c TOLIKO] [POLJE]"
+
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Definira ili prikaže aliase.\n"
+"\n"
+"    Bez argumenata, „alias“ ispiše popis aliasa na standardni izlaz u\n"
+"    iskoristivom formatu: alias IME='ZAMJENA'.\n"
+"    S argumentima, alias je definirani za svako IME za koje je dȃna\n"
+"    ZAMJENA. Ako ZAMJENA završi s razmakom (bjelinom), onda pri ekspanziji\n"
+"    alias provjeri je li je i sljedeća rije� alias.\n"
+"\n"
+"    Završi s k�dom 0 osim ako nije definirani alias za dȃno IME."
+
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Ukloni svako dȃno IME iz popisa definiranih aliasa.\n"
+"\n"
+"    S opcijom „-a“ izbriše sve definirane aliase.\n"
+"\n"
+"    Završi s uspjehom osim ako IME nije postojeći alias."
+
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"Odredi i postavi „readline“ pre�ace i varijable.\n"
+"\n"
+"    Poveže sekvencije tipki (pre�ace) na „readline“ funkciju, ili makro ili\n"
+"    „readline“ varijablu. Sintaksa argumenta koji nije opcija je ista kao\n"
+"    u ~/.inputrc, ali mora biti proslijeđeni kao pojedina�ni argument,\n"
+"    na primjer: '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"\n"
+"    Opcije:\n"
+"      -f DATOTEKA        pro�ita pre�ace iz ove DATOTEKE\n"
+"      -l                 izlista sve poznate funkcije\n"
+"      -m TIPKOVNICA      koristi ovu TIPKOVNICU dok traje ova naredba;\n"
+"                         moguće TIPKOVNICE su emacs, emacs-standard,\n"
+"                         emacs-meta, emacs-ctlx, vi, vi-move, vi-command,\n"
+"                         i vi-insert.\n"
+"      -P                 izlista imena funkcija i pre�aca\n"
+"      -p                 ispiše imena funkcija i pre�aca u formatu\n"
+"                           koji se može iskoristiti kao ulaz\n"
+"      -r PREČAC          ukloni sekvenciju tipki za ovaj pre�ac\n"
+"      -q FUNKCIJA        pokaže tipke koje pozivaju ovu FUNKCIJU\n"
+"      -S                 pokaže sekvencije tipki poje pozivaju makroe\n"
+"                           s njihovim vrijednostima\n"
+"      -s                 ispiše sekvencije tipki poje pozivaju makroe s\n"
+"                           njihovim vrijednostima u formatu koji se može\n"
+"                           iskoristiti kao ulaz\n"
+"      -u FUNKCIJA        poništi sve pre�ace vezane na ovu FUNKCIJU\n"
+"      -V                 izlista imena varijabli s njihovim vrijednostima\n"
+"      -v                 ispiše imena varijabli s njihovim vrijednostima\n"
+"                           u formatu koji se može iskoristiti kao ulaz\n"
+"      -x PREČAC:SHELL_NAREDBA  u�ini da se izvrši ova SHELL_NAREDBA k�d god\n"
+"                                 se unese taj PREÄŒAC (sekvencija tipki)\n"
+"      -X                 ispiše pre�ace (sekvencije tipki) vezane s „-x“ i\n"
+"                           njima pridružene naredbe u formatu koji se može\n"
+"                           iskoristiti kao ulaz\n"
+"\n"
+"    Završi s k�dom 0 osim ako je dȃna neprepoznata opcija\n"
+"    ili se dogodila greška."
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Izlaz iz for, while ili until petlji.\n"
+"\n"
+"    Ako je dȃn N, ukida se N ugnježđenih petlji.\n"
+"\n"
+"    Završi s k�dom 0 osim ako je N manji od 1."
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Nastavlja sljedeću iteraciju ugnježđenih for, while ili until petlji.\n"
+"    Ako je dȃn N, nastavlja se N-tom ugnježđenom petljom.\n"
+"\n"
+"    Završi s k�dom 0 osim ako je N manji od 1."
+
+#: builtins.c:354
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Izvrši ugrađenu funkciju ljuske (shell builtins).\n"
+"\n"
+"    Izvrši dȃnu UGRA�ENU_SHELL_FUNKCIJU (SHELL-BUILTIN) funkciju s dȃnim\n"
+"    ARGUMENTIMA. To je korisno ako želite redefinirati implementaciju\n"
+"    ugrađene shell funkcije kao vlastitu shell funkciju (skriptu s istim\n"
+"    imenom kao ugrađena shell funkcija), a potrebna vam je funkcionalnost\n"
+"    te ugrađene shell funkcije unutar vaše vlastite skripte (shell "
+"funkcije).\n"
+"\n"
+"    Završi s k�dom UGRA�ENE_SHELL_FUNKCIJE ili s k�dom 1 ako\n"
+"    UGRA�ENA_SHELL_FUNKCIJA nije ugrađene funkcija ljuske (shell builtin)."
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Vrati kontekst trenutnog poziva potprogramu.\n"
+"\n"
+"    Bez IZRAZA, vrati „$line $filename“. Ako je dȃn IZRAZ, vrati\n"
+"    „$line $subroutine $filename“; ova dodatna informacija može poslužiti\n"
+"    za „stack trace“.\n"
+"\n"
+"    Vrijednost IZRAZA pokazuje koliko se treba vratiti unatrag od\n"
+"    trenutne pozicije, s time da je pozicija 0 trenutna pozicija.\n"
+"\n"
+"    Završi s k�dom 0 osim ako ljuska ne izvršava ljuskinu funkciju\n"
+"    ili je IZRAZ nevaljani."
+
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"Promjeni trenutni direktorij.\n"
+"\n"
+"    Promijeni trenutni direktorij u dȃni DIREKTORIJ. Zadano, DIREKTORIJ\n"
+"    je vrijednost varijable HOME.\n"
+"\n"
+"    Varijabla CDPATH definira staze (direktorije) po kojima se\n"
+"    traži dȃni DIREKTORIJ.\n"
+"\n"
+"    Nazivi direktorija (staza) u CDPATH su razdvojeni s dvoto�kom (:);\n"
+"    prazni naziv za direktorij je isto kao i trenutni direktorij (.).\n"
+"    Ako dȃni DIREKTORIJ zapo�inje s kosom crtom (/), onda se CDPATH\n"
+"    ne koristi.\n"
+"\n"
+"    Ako se dȃni direktorij ne pronađe, a omogućena je opcija „cdable_vars“,\n"
+"    tada se dȃna rije� uzme kao ime varijable; ako ta varijabla sadrži\n"
+"    naziv, „cd“ prijeđe u direktorij s tim nazivom.\n"
+"\n"
+"    Opcije:\n"
+"      -L    slijedi simboli�ke veze; simboli�ke veze u DIREKTORIJu\n"
+"              razriješi nakon procesiranja „..“ instancije DIREKTORIJa;\n"
+"              opcija „-L“ je aktivna u zadanom (po�etnom) stanju\n"
+"      -P    rabi fizi�ku strukturu direktorija umjesto da slijedi\n"
+"              simboli�ke veze; simboli�ke veze DIREKTORIJa\n"
+"              razriješi prije procesiranja „..“ instancije DIREKTORIJa\n"
+"      -e    ako je dȃna s opcijom „-P“, i trenutni radni direktorij nije\n"
+"              moguće uspješno odrediti nakon uspješne promjene direktorija,\n"
+"              „cd“ završi s k�dom razli�itim od 0.\n"
+"      -@    opiše proširene atribute povezane s datotekom kao direktorij\n"
+"              koji sadrži atribute datoteke (ako sustav to podržava)\n"
+"\n"
+"    Token „..“ se procesira uklanjanjem komponente staze koja mu neposredno\n"
+"    prethodi unatrag do kose crte „/“ ili do po�etka DIREKTORIJA.\n"
+"\n"
+"    Završi s k�dom 0 ako je direktorij promijenjen i ako je\n"
+"    varijabla okoline PWD uspješno postavljena k�d je dȃna opcija „-P“;\n"
+"    u suprotnom završi s k�dom 1."
+
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"Ispiše ime trenutnog radnog direktorija.\n"
+"\n"
+"    Opcije:\n"
+"      -L   ispiše vrijednost od $PWD ako sadrži trenutni radni direktorij\n"
+"      -P   ispiše stvarnu fizi�ku stazu do direktorija bez simboli�kih veza\n"
+"\n"
+"    U zadanom stanju „pwd“ se ponaša kao da je aktivna „-L“ opcija.\n"
+"\n"
+"    Završi s k�dom 0 osim ako nije dȃna nevaljana opcija\n"
+"    ili se trenutni radni direktorij ne može pro�itati."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr "Naredba nema nikakvog efekta, ne radi ništa; uvijek završi s k�dom 0."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr "Uvijek završi uspješno s k�dom 0."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr "Uvijek završi neuspješno s k�dom 1."
+
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Izvrši jednostavnu naredbu ili pokaže informacije o naredbama.\n"
+"\n"
+"    Izvrši dȃnu NAREDBU s dȃnim ARGUMENTIMA ignorirajući pritom bilo\n"
+"    koju funkciju ljuske s istim imenom (naredba). Može se koristiti da\n"
+"    pokrenete naredbu na disku i onda k�d postoji funkcija s istim imenom.\n"
+"\n"
+"    Opcije:\n"
+"      -p   rabi zadanu vrijednost za PATH kao garanciju\n"
+"             pronalaženja svih standardnih programa\n"
+"      -v   ispiše opis NAREDBE, sli�no kao „type“ builtin\n"
+"      -V   ispiše opširniji opis svake dȃne NAREDBE\n"
+"\n"
+"    Završi s izlaznim statusom NAREDBE\n"
+"    ili s 1 ako NAREDBA nije pronađena."
+
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"Postavlja vrijednosti i atribute varijablama.\n"
+"\n"
+"    Deklarira varijable i dodjeljuje im atribute. Ako IMEna nisu dȃna,\n"
+"    prikaže atribute i vrijednosti svih varijabli.\n"
+"\n"
+"    Opcije:\n"
+"      -f   prikaže samo definirane funkcije (ne pokaže varijable)\n"
+"      -F   prikaže samo imena funkcija bez definicija\n"
+"      -g   kreira globalne varijable samo za upotrebu u funkciji ljuske;\n"
+"             ina�e se ignoriraju\n"
+"      -p   prikaže atribute i vrijednost za svako dȃno IME\n"
+"\n"
+"    Atributi:\n"
+"      -a   u�ini od dȃnih IMEna indeksirana polja (ako je to podržano)\n"
+"      -A   u�ini od dȃnih IMEna asocijativna polja (ako je to podržano)\n"
+"      -i   u�ini da dȃna IMEna dobiju „integer“ svojstva\n"
+"      -l   pretvori slova dȃnih IMEna u mala slova prilikom upotrebe\n"
+"      -n   u�ini dȃno IME referencijom na drugu varijablu s imenom\n"
+"             jednakim „vrijednost od varijable IME“\n"
+"      -r   u�ini dȃna IMEna readonly\n"
+"      -t   u�ini da dȃna IMEna dobiju „trace“ svojstva\n"
+"      -u   pretvori slova dȃnih IMEna u velika slova prilikom upotrebe\n"
+"      -x   ozna�i dȃna IMEna za ekport\n"
+"\n"
+"    „+“ umjesto „-“ isklju�i dȃni atribut.\n"
+"\n"
+"    Varijable s „integer“ atributom obavljaju aritmeti�ke operacije tijekom\n"
+"    izvođenja i upotrebe (pogledajte „let“ naredbu).\n"
+"\n"
+"    Unutar funkcije „declare“ u�ini dȃna IMEna lokalnima, sli�no kao\n"
+"    naredba „local“. Opcija „-g“ sprije�i takvo ponašanje.\n"
+"\n"
+"    Završi s k�dom 0 osim ako je dȃna nevaljana opcija\n"
+"    ili se dogodila greška prilikom zadavanja varijabli."
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"Postavi vrijednosti i svojstva varijabli.\n"
+"\n"
+"    Sinonim za „declare“.  Za detalje upišite „help declare“."
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Definira lokalne varijable.\n"
+"\n"
+"    Kreira lokalnu varijablu IME i dodijeli joj vrijednost. OPCIJA\n"
+"    može biti bilo koja od opcija koju prihvaća naredba „declare“.\n"
+"\n"
+"    Lokalne varijable mogu se koristiti samo unutar neke funkcije a\n"
+"    vidljive su samo funkciji u kojoj su definirane i njezinim potomcima.\n"
+"\n"
+"    Završi s k�dom 0 osim ako su dȃne nevaljane opcije,\n"
+"    dogodila se greška pri dodijeli ili ljuska ne izvrši funkciju."
+
+#: builtins.c:557
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Dȃne argumente ispiše na standardni izlaz.\n"
+"\n"
+"    Ispiše dȃne argumente na standardni izlaz, međusobno odvojene s\n"
+"    jednim razmakom (bjelinom) i na kraju s novim retkom.\n"
+"\n"
+"    Opcije:\n"
+"      -n   ne pripoji novi redak (znak novog retka)\n"
+"      -e   interpretira sljedeće sekvencije maskirane\n"
+"             s obratnom kosom crtom (backslash escapes)\n"
+"      -E   ne interpretira sekvencije maskirane\n"
+"             s obratnom kosom crtom (backslash escapes)\n"
+"\n"
+"    „echo“ interpretira ove kontrolne kodove (sekvencije maskirane\n"
+"    s obratnom kosom crtom — backslash escapes):\n"
+"      \\a   alert (zvu�ni signal)\n"
+"      \\b   backspace\n"
+"      \\c   sprije�i daljni izlaz\n"
+"      \\e   znak za escape (ESC)\n"
+"      \\E   znak za escape (ESC)\n"
+"      \\f   nova stranica (znak za FF, form feed)\n"
+"      \\n   novi redak (znak za LF, line feed)\n"
+"      \\r   na po�etak novoga retka (Enter, znak za CR, carriage return)\n"
+"      \\t   horizontalni tabulator\n"
+"      \\v   vertikalni tabulator\n"
+"      \\\\     backslash (\\)\n"
+"      \\0NNN   znak s ASCII k�dom NNN (oktalni, 1 do 3 oktalne znamenke)\n"
+"      \\xHH    osmobitni znak �ija je vrijednost HH (heksadecimalna)\n"
+"      \\uHHHH  unikodni znak �ija je vrijednost HHHH  (heksadecimalna)\n"
+"                 HHHH može biti od 1 do 4 heksadecimalne znamenke\n"
+"      \\UHHHHHHHH  unikodni znak �ija je vrijednost HHHH  (heksadecimalna)\n"
+"                     HHHHHHHH može biti od 1 do 8 heksadecimalnih znamenki\n"
+"\n"
+"    Završi s k�dom 0 osim ako se ne dogodi greška pri pisanju."
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Ispiše argumente na standardni izlaz.\n"
+"\n"
+"    Prikaže ARGUMENTE na standardnom izlazu (pripoji im znak za novi "
+"redak).\n"
+"    Opcijom „-n“ može se isklju�iti pripajanje znaka za novi redak.\n"
+"\n"
+"    Završi s k�dom 0 ako se ne dogodi greška pri pisanju."
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"Omogući ili onemogući ugrađene opcije ljuske.\n"
+"\n"
+"    Aktivira i deaktivira ugrađene opcije ljuske. Deaktiviranje vam\n"
+"    omogućava pokrenuti naredbu na disku s istim imenom kao ugrađena\n"
+"    komanda bez potrebe specificiranja kompletne staze.\n"
+"\n"
+"    Opcije:\n"
+"      -a   ispiše ugrađene naredbe i pokaže jesu ili nisu omogućene\n"
+"      -n   onemogući IMEnovane naredbe ili izlista onemogućene naredbe\n"
+"      -p   generira izlaz koji se može koristi za ulaz (zadano)\n"
+"      -s   ispiše samo imena specijalnih POSIX ugrađenih naredbi\n"
+"\n"
+"    Opcije koje upravljaju dinami�ko u�itavanje:\n"
+"      -f   u�ita ugrađenu naredbu IME iz dijeljenoga objekta DATOTEKA\n"
+"      -d   ukloni ugrađenu naredbu u�itanu s „-f“\n"
+"\n"
+"    Bez opcija, omogućena su sva dȃna IMEna. Bez imena prikazane su\n"
+"    omogućene naredbe (ili s „-n“ onemogućene).\n"
+"\n"
+"    Primjer: da koristite binarnu datoteku „test“ koja se nalazi na putu\n"
+"    pretraživanja PATH, umjesto ugrađene (test) naredbe, upišite\n"
+"    „enable -n test“.\n"
+"\n"
+"    Završi s k�dom 0 osim ako IME nije ugrađena naredba\n"
+"    ili se nije dogodila greška."
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Izvrši argumente kao naredbu ljuske.\n"
+"\n"
+"    Združi argumente u jedinstveni string, upotrijebi ga kao ulaz za ljusku\n"
+"    i izvrši rezultirajuću naredbu.\n"
+"\n"
+"    Završi s k�dom naredbe ili uspješno ako je naredba prazna."
+
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"Analiza argumenata opcija.\n"
+"\n"
+"    Procedure ljuske koriste „getopts“ za analizu položajnih parametara\n"
+"    kao opcije.\n"
+"    \n"
+"    OPCIJA_STRING sadrži slova opcije koje treba prepoznati; ako iza\n"
+"    slova slijedi dvoto�ka, o�ekuje se da opcija ima argument koji treba\n"
+"    biti bjelinom odvojen od opcije.\n"
+"\n"
+"    Svaki put k�d se pozove, getopts će smjestiti sljedeću opciju u "
+"ljuskinu\n"
+"    varijablu IME (ako IME ne postoji, getopts ga inicijalizira), a indeks\n"
+"    sljedećeg argumenta koji treba procesirati u ljuskinu varijablu OPTIND.\n"
+"    OPTIND je inicijaliziran na 1 pri svakom pozivanju ljuske ili ljuskine\n"
+"    skripte. Ako opcija zahtijeva argument, getopts smjesti taj argument u\n"
+"    ljuskinu varijablu OPTARG.\n"
+"\n"
+"    getopts javlja greške na jedan od dva na�ina. Ako je dvoto�ka prvi znak "
+"u\n"
+"    OPCIJA_STRING, getopts tiho prijavi grešku (ne ispisuje poruke o "
+"greškama).\n"
+"    Ako naiđe na nevaljanu opciju, getopts smjesti nađeni znak opcije u "
+"OPTARG.\n"
+"    Ako zahtijevani argument nije pronađen, getopts smjesti „:“ u IME i "
+"postavi\n"
+"    OPTARG na pronađeni znak opcije. Ako getopts ne radi tiho i naiđe na\n"
+"    nevaljanu opciju, getopts smjesti „?“ u IME i poništi OPTARG.\n"
+"    Ako zahtijevani argument nije pronađen, getopts smjesti „?“ u IME, "
+"poništi\n"
+"    OPTARG i ispiše poruku o greškama.\n"
+"\n"
+"    Ako ljuskina varijabla OPTERR ima vrijednost 0, getopts onemogući ispis\n"
+"    poruka o greškama, �ak i k�d prvi znak u OPCIJA_STRING nije dvoto�ka.\n"
+"    Zadano, OPTERR ima vrijednost 1.\n"
+"\n"
+"    Obi�no getopts analizira položajne parametre ($0 - $9), ali ako je\n"
+"    dȃno više argumenata, onda analizira te argumente.\n"
+"\n"
+"    Završi s k�dom 0 ako pronađe opciju; ako naiđe na kraj opcija\n"
+"    ili ako se dogodi greška, završi s neuspjehom."
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"Zamjeni ljusku s dȃnom naredbom.\n"
+"\n"
+"    Izvrši dȃnu NAREDBU, zamijenivši ovu ljusku s ovim programom.\n"
+"    Eventualni ARGUMENTI postanu argumenti NAREDBE. Ako NAREDBA nije\n"
+"    specificirana, sva preusmjeravanja se dogode u trenutnoj ljusci.\n"
+"\n"
+"    Opcije:\n"
+"      -a IME   d�de IME kao nulti argument NAREDBI\n"
+"      -c       izvrši NAREDBU u praznoj okolini\n"
+"      -l       smjesti spojnicu („-“) kao nulti argument NAREDBI\n"
+"\n"
+"    Ako se naredba ne može izvršiti, ne-interaktivna ljuska završi,\n"
+"    osim ako je aktivna opcija ljuske „execfail“.\n"
+"\n"
+"    Završi s k�dom 0, osim ako NAREDBA nije pronađena,\n"
+"    ili se dogodila greška preusmjeravanja."
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Izlaz iz ljuske.\n"
+"\n"
+"    Završi s k�dom N. Bez N završi s k�dom zadnje izvršene naredbe."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Izlaz iz prijavne ljuske.\n"
+"\n"
+"    Završi s k�dom N. Završi s greškom ako to nije prijavna ljuska."
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"Prikaže ili izvrši naredbe iz popisa povijesti.\n"
+"\n"
+"    Koristi se za prikazivanje dosadašnjih, za uređivanje, ili za ponovno\n"
+"    pokretanje naredbi. PRVA i ZADNJA mogu biti brojevi koji specificiraju\n"
+"    raspon, ili PRVA može biti string koji pokazuje na posljednju naredbu\n"
+"    �ije ime zapo�inje sa stringom.\n"
+"\n"
+"    Opcije:\n"
+"      -e EDITOR  ime EDITORA koji će se koristi; zadano, koristi se FCEDIT,\n"
+"                   zatim EDITOR ili kona�no „vi“\n"
+"      -l         izlista popis naredbi (umjesto uređivanja)\n"
+"      -n         popis bez brojeva\n"
+"      -r         popis s obrnutim redoslijedom (najnovija prvo)\n"
+"\n"
+"    Prikladni alias s ovom funkcijom je r='fc -s'. Tako uneseni „r“ izvrši\n"
+"    ponovno posljednju naredbu, a uneseni „r cc“ izvrši posljednju naredbu\n"
+"    koja zapo�inje s „cc“.\n"
+"\n"
+"    Završi s k�dom izvršene naredbe; razli�ito od 0 ako se dogodi greška."
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Premjesti posao u interaktivni na�in.\n"
+"\n"
+"    Smjesti posao JOBSPEC u interaktivni na�in i u�ini ga\n"
+"    trenutnim poslom. Bez dȃnoga JOBSPEC, ljuska rabi svoj pojam\n"
+"    o trenutnom poslu.\n"
+"\n"
+"    Završi s k�dom naredbe smještene u interaktivni na�in\n"
+"    ili s neuspjehom ako se dogodi greška."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Premjesti poslove u pozadinu.\n"
+"\n"
+"    Smjesti poslove idenificirane sa svakim JOBSPEC u pozadinu, kao da su\n"
+"    pokrenuti s „&“. Bez dȃnih JOBSPEC, ljuska rabi svoj pojam\n"
+"    o trenutnom poslu.\n"
+"\n"
+"    Završi s k�dom 0 osim ako kontrola nad poslovima nije omogućena\n"
+"    ili se dogodila greška."
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"Zapamti ili prikaže lokacije programa.\n"
+"\n"
+"    Odredi i zapamti apsolutnu stazu za svaku naredbu IME. Ako nisu\n"
+"    dȃni argumenti, prikaže informacije o zapamćenim naredbama.\n"
+"\n"
+"    Opcije:\n"
+"      -d            zaboravi zapamćene lokacije za svako IME\n"
+"      -l            generira izlaz koji se može koristi za ulaz\n"
+"      -p IME_STAZE  rabi IME_STAZE kao kao apsolutnu stazu za IME\n"
+"      -r            zaboravi sve zapamćene lokacije\n"
+"      -t            ispiše zapamćene lokacije za svako IME\n"
+"                      (s prefiksom IME ako je dȃno više IMEna)\n"
+"    Svako dȃno IME se traži u $PATH i doda se popisu zapamćenih\n"
+"    naredbi.\n"
+"\n"
+"    Završi s k�dom 0 osim ako nije pronađeno IME\n"
+"    ili je dȃna nevaljana opcija."
+
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Prikaže informacije o ugrađenim (builtin) naredbama.\n"
+"\n"
+"    Prikaže kratke sažetke o ugrađenim naredbama. Ako je specificirani\n"
+"    UZORAK, pokaže detaljnu pomoć za sve naredbe koje podudare UZORAK,\n"
+"    ina�e ispiše popis tema za koje možete potražiti detalje.\n"
+"\n"
+"    Opcije:\n"
+"      -d   ukratko opisano djelovanje naredbe\n"
+"      -m   prikaže uporabu u pseudo manpage formatu\n"
+"      -s   prikaže samo sinopsis uporabe za svaku\n"
+"             naredbu koja podudara UZORAK\n"
+"\n"
+"    Završi s k�dom 0 osim ako UZORAK nije pronađen,\n"
+"    ili je dȃna nevaljana opcija."
+
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Prikaže ili manipulira povijest naredbi.\n"
+"\n"
+"    Prikaže numerirani popis izvršenih naredbi (povijest); ispred\n"
+"    modificiranih stavki stoji prefiks „*“. Ako je dȃn argument N,\n"
+"    ispiše N najmlađih (zadnjih) redaka povijesti.\n"
+"\n"
+"    Opcije:\n"
+"      -c   po�isti povijest iz memorije; zaboravi sve izvršene naredbe\n"
+"      -d   POZICIJA  izbriše redak povijesti na POZICIJI\n"
+"\n"
+"      -a   pripoji trenutnu povijest „povijesnoj“ datoteci\n"
+"      -n   pripoji sve nepro�itane retke povijesne datoteke\n"
+"             trenutnom popisu povijesti\n"
+"      -r   pro�ita i pripoji povijesnu datoteku\n"
+"             trenutnom popisu povijesti\n"
+"      -w   trenutnu povijest zapiše u povijesnu datoteku\n"
+"\n"
+"      -p   proširi povijest na svakom ARGUMENTU i prikaže rezultat\n"
+"             bez spremanja u povijesni popis\n"
+"      -s   Pripoji ARGUMENTe popisu povijesti kao pojedina�ne stavke \n"
+"\n"
+"    Kao povijesna datoteka koristi se DATOTEKA ako je dȃna; ako nije dȃna,\n"
+"    koristi se varijabla HISTFILE (ako ima vrijednost), ina�e se koristi\n"
+"    ~/.bash_history.\n"
+"\n"
+"    Ako HISTTIMEFORMAT varijabla postoji i nije nula, njezinu vrijednost\n"
+"    koristi strftime(3) kao format string za ispis vremenskih oznaka\n"
+"    povijesnih stavki; ina�e, vremenske oznake se ne ispisuju.\n"
+"\n"
+"    Završi s statusom 0 osim ako nije dȃna nevaljana opcija\n"
+"    ili se dogodila greška."
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"Prikaže status poslova.\n"
+"\n"
+"    Izlista aktivne poslove. JOBSPEC ograni�i izlaz na taj posao.\n"
+"    Bez opcija, prikaže status svih aktivnih poslova.\n"
+"\n"
+"    Opcije:\n"
+"      -l   pokaže i ID-ove procesa uz uobi�ajene informacije\n"
+"      -n   pokaže samo procese koji su se promijenili od zadnjeg izvješća\n"
+"      -p   pokaže samo ID-ove procesa\n"
+"      -r   ograni�i izlaz samo na trenutno pokrenute poslove\n"
+"      -s   ograni�i izlaz samo na zaustavljene poslove\n"
+"\n"
+"    Ako je dȃna opcija -x, „jobs“ zamijeni svaki JOBSPEC\n"
+"    pronađen u NAREDBI ili u ARGUMENTIMA s odgovarajućim\n"
+"    ID-om procesne grupe i izvrši NAREDBU s ARGUMENTIMA.\n"
+"\n"
+"    Završi s k�dom 0 osim ako je dȃna nevaljana opcija ili se dogodila "
+"greška.\n"
+"    Ako je dȃna opcija -x, završi sa izlaznim statusom NAREDBE."
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"Ukloni poslove iz trenutne ljuske.\n"
+"\n"
+"    Ukloni svaki JOBSPEC argument iz tablice aktivnih poslova.\n"
+"    Bez ikakvih JOBSPEC ljuska rabi svoj pojam o trenutnom\n"
+"    poslu.\n"
+"\n"
+"    Opcije:\n"
+"      -a   ukloni sve poslove ako nije dȃni JOBSPEC\n"
+"      -h   ozna�i svaki JOBSPEC tako da se SIGHUP ne šalje\n"
+"           poslu ako ljuska primi SIGHUP\n"
+"      -r   ukloni samo pokrenute poslove\n"
+"\n"
+"    Završi s k�dom 0 osim ako je dȃna nevaljana opcija\n"
+"    ili nije dȃni JOBSPEC."
+
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Pošalje signal poslu.\n"
+"\n"
+"    Pošalje signal dȃn u SIGSPEC ili SIGNUM procesima koji su\n"
+"    identificirani s PID-om ili s JOBSPEC. Ako nije\n"
+"    dȃn nijedan signal (ni SIGSPEC ni SIGNUM), pošalje se SIGTERM.\n"
+"\n"
+"    Opcije:\n"
+"      -s IME   IME je ime signala koji se Å¡alje\n"
+"      -n BROJ  BROJ je broj signala koji se Å¡alje\n"
+"      -l       izlista imena dostupnih signala; ako su dȃni argumenti iza\n"
+"               „-l“, to su brojevi signala �ija odgovarajuća imena\n"
+"               treba ispisati\n"
+"      -L       isto kao -l\n"
+"\n"
+"    „kill“ je ugrađena ljuskina naredba iz dva razloga: dopušta vam da se\n"
+"    koristi ID posla umjesto ID procesa i također vam dopušta ubiti procese\n"
+"    iako ste dostigli vaše ograni�enje broja procesa koje možete kreirati;\n"
+"    tj. ne morate pokrenuti novi proces da ubijete prekobrojne procese.\n"
+"\n"
+"    Završi s k�dom 0 osim ako je dȃna nevaljana opcija\n"
+"    ili se dogodila greška."
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"Evaluira aritmeti�ke izraze.\n"
+"\n"
+"    Evaluira svaki ARGUMENT kao aritmeti�ki izraz. Evaluacija se\n"
+"    obavlja za cijele brojeve fiksne Å¡irine bez provjere prelijevanja.\n"
+"    Ipak, dijeljenje s nulom se detektira i prijavi kao greška.\n"
+"\n"
+"    Popis koji slijedi opisuje operatore s jednakim prioritetom u\n"
+"    istoj grupi, a grupe su poredane po opadajućemu prioritetu.\n"
+"\n"
+"        var++, var--    post-increment, post-decrement varijable\n"
+"        ++var, --var    pre-increment, pre-decrement varijable\n"
+"        -, +            unarni minus, unarni plus\n"
+"        !, ~            logi�ka i bitovska negacija\n"
+"        **              potenciranje\n"
+"        *, /, %         množenje, dijeljenje, ostatak dijeljenja\n"
+"        +, -            zbrajanje, oduzimanje\n"
+"        <<, >>          pomak za bit ulijevo i udesno\n"
+"        <=, >=, <, >    usporedba\n"
+"        ==, !=          jednako, nejednako\n"
+"        &               bitovski AND\n"
+"        ^               bitovski XOR\n"
+"        |               bitovski OR\n"
+"        &&              logi�ki AND\n"
+"        ||              logi�ki OR\n"
+"\n"
+"        expr ? expr : expr    uvjetni izraz\n"
+"\n"
+"        =, *=, /=, %=, +=, -=, <<=, >>=,  &=, ^=, |=    pridruživanje\n"
+"\n"
+"    Varijable ljuske su dopuštene kao parametri. Ime varijable se zamijeni\n"
+"    s njezinom vrijednošću (ako treba, pretvori se u cijeli broj).\n"
+"    Varijable, za upotrebu u izrazima, ne moraju imati atribut cijelog\n"
+"    broja.\n"
+"\n"
+"    Operatori se evaluiraju prema pravilima prioriteta. Najprije se\n"
+"    evaluiraju pod-izrazi u zagradama i tako mogu prevagnuti nad gore\n"
+"    opisanim pravilima prioriteta.\n"
+"\n"
+"    Ako zadnji ARGUMENT evaluira na 0 (nula), „let“ završi s k�dom 1;\n"
+"    ina�e završi s k�dom 0."
+
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"Pro�ita redak iz standardnoga ulaza i razdijeli ga na polja.\n"
+"\n"
+"    Pro�ita jedan redak iz standardnoga ulaza (ili dȃnoga deskriptora "
+"datoteke\n"
+"    FD ako je dȃna opcija „-u“) i dodijeli prvu rije� prvom IMEnu, drugu "
+"rije�\n"
+"    drugom IMEnu, i tako dalje; višak rije�i dodijeli je zadnjem IMEnu\n"
+"    Samo znakovi sadržani u  varijabli IFS prepoznaju se kao ME�A\n"
+"    (razdjelnik rije�i). Ako nije dȃno nijedno IME, pro�itani redak se\n"
+"    spremi u varijablu REPLY.\n"
+"\n"
+"    Opcije:\n"
+"      -a POLJE   pro�itane rije�i dodijeli sekvencijalno indeksima POLJA\n"
+"                   po�evši od nule\n"
+"      -d ME�A    nastavi �itati sve dok ne pro�ita prvu ME�U (umjesto LF "
+"znaka)\n"
+"      -e           rabi „readline“ za dobaviti redak\n"
+"      -i TEKST   rabi TEKST kao po�etni tekst za „readline“\n"
+"      -n BROJ    zaustavi �itanje nakon pro�itanih ne više od BROJ znakova\n"
+"                   ili nakon LF znaka (umjesto da uvijek �eka na LF znak)\n"
+"      -N BROJ    zaustavi �itanje samo nakon pro�itanih ne više od BROJ\n"
+"                   znakova ili nakon EOF znaka ili nakon isteka „t SEKUNDA\n"
+"      -p PROMPT  ispiše string PROMPT kao prompt (bez završnog znaka novog\n"
+"                    retka) prije po�etka �itanja retka\n"
+"      -r         onemogući maskiranje kódova s obratnom kosom crtom\n"
+"      -s         siguran ulaz — ne odjekuje ulaz na terminal\n"
+"      -t BROJ    nakon isteka BROJ SEKUNDI prestane �ekati na ulaz i završi\n"
+"                   s k�dom većim od 128; zadano, broj sekundi �ekanja je\n"
+"                   vrijednost varijable TMOUT; BROJ može biti i realni "
+"broj;\n"
+"                   Ako je BROJ = 0, „read“ završi odmah bez da išta �ita, a\n"
+"                   samo ako je ulaz dostupni na specificiranom deskriptoru\n"
+"                   datoteke Završi s k�dom 0\n"
+"\n"
+"      -u FD      �ita iz deskriptora datoteke FD umjesto iz standardnoga "
+"ulaza\n"
+"\n"
+"      Završi s k�dom 0 osim ako ne naiđe na konac datoteke\n"
+"      (EOF), ili je isteklo vrijeme �ekanja, ili se dogodila greška\n"
+"      pri dodjeli, ili je specificirani nevaljani deskriptor datoteke\n"
+"      kao argument opciji „-u“."
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"Povrat iz funkcije ljuske.\n"
+"\n"
+"    U�ini da funkcija ili pokrenuta skripta završi sa izlaznom vrijednošću\n"
+"    specificiranom s N. Ako N nije dȃn, završi s k�dom zadnje naredbe\n"
+"    izvršene unutar funkcije ili skripte.\n"
+"\n"
+"    Vrati vrijednost N ili 1 ako ljuska ne izvrši\n"
+"    funkciju ili skriptu."
+
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"Postavi vrijednosti opcija ljuske i položajnih parametara.\n"
+"\n"
+"    Omogući/onemogući svojstva ljuske ili mijenja vrijednosti položajnih\n"
+"    parametara. Bez opcija ili argumenata „set“ prikaže imena i vrijednosti\n"
+"    svih definiranih varijabli i funkcija u formatu upotrebljivom kao\n"
+"    ulaz za postavljanje/poništavanje trenutno postavljenih varijabli.\n"
+"    Dostupne su sljedeće opcije („+“ umjesto „-“ isklju�i dȃnu opciju):\n"
+"\n"
+"      -a  automatski eksportira nove ili modificirane varijable i funkcije\n"
+"      -B  izvrši brace expansion, npr. echo a{d,c}e -> ade, ace (zadano)\n"
+"      -b  odmah prijavi prekid posla (ne �eka da završi trenutna naredba)\n"
+"      -C  onemogući da preusmjereni eksport piše preko regularnih datoteka\n"
+"      -E  omogući da bilo koji ERR „trap“ naslijede funkcije ljuske i "
+"potomci\n"
+"      -e  završi odmah ako naredba završi s k�dom razli�itim od nula\n"
+"      -f  onemogući zamjenske znakove za imena datoteka (isklju�i "
+"„globbing“)\n"
+"      -H  omogući upotrebu znaka „!“ za supstituciju povijesti naredbi\n"
+"      -h  pamti (apslolutne) lokacije izvršenih naredbi (zadano)\n"
+"      -k  smjesti sve argumente dodijeljene varijablama u okolinu\n"
+"            (a ne samo one koje prethode imenu naredbe)\n"
+"      -m  kontrola nad poslovima je omogućena (zadano)\n"
+"      -n  pro�ita, ali ne izvrši naredbe („testiranje“)\n"
+"      -o IME_OPCIJE  omogući IME_OPCIJU (v. niže za duga�ka imena opcija)\n"
+"      -P  ne razriješi simboli�ke veze pri izvršavanju naredbi poput „cd“\n"
+"            koje promjene trenutni direktorij\n"
+"      -p  uklju�i privilegirani m�d: datoteke BASH_ENV i ENV se ignoriraju,\n"
+"            funkcije ljuske se ne importiraju iz okoline, a ignoriraju se i\n"
+"            sve SHELLOPTS; taj m�d se automatski aktivira k�d god se realni\n"
+"            i efektivni UID i GID ne podudaraju. Isklju�ivanje ove opcije\n"
+"            u�ini da je efektivni UID i GID isti kao i realni UID i GID.\n"
+"      -T  DEBUG i RETURN „trap“ naslijede funkcije ljuske i potomci\n"
+"      -t  završi nakon �itanja i izvršenja jedne naredbe\n"
+"      -u  nepostojeće varijable tretira kao grešku k�d supstituira\n"
+"      -v  ispisuju ulaz (odjekuje ih) istovremeno s �itanjem\n"
+"      -x  ispisuje naredbe s argumentima istovremeno s izvršavanjem\n"
+"      --  argumenti koji slijede su položajni parametri; ako ih nema,\n"
+"            postojeći položajni argumenti se brišu (uklanjaju se)\n"
+"      -   isklju�i opcije -v i -x; argumenti koji slijede su položajni\n"
+"            parametri; ali ako ih nema, postojeći položajni argumenti\n"
+"            se ne brišu (ostaju)\n"
+"\n"
+"    Opcije se također mogu koristiti pri pokretanju ljuske. Postojeće\n"
+"    stanje opcija može se naći u $-. Za eventualne dodatne argumente iz\n"
+"    „set“ uzima se da su položajni parametri i dodjeljuje se, po redu, na\n"
+"    $1, $2, ... $N.\n"
+"\n"
+"    Duga�ki nazivi koji se koriste s opcijom -o (ili +o)\n"
+"      allexport    isto kao -a\n"
+"      braceexpand  isto kao -B  (brace ekspanzija, npr. echo a{d,c}e -> ade, "
+"ace\n"
+"      emacs        za uređivanje redaka koristi su�elje u „emacs“ stilu\n"
+"      errexit      isto kao -e\n"
+"      errtrace     isto kao -E\n"
+"      functrace    isto kao -T\n"
+"      hashall      isto kao -h\n"
+"      histexpand   isto kao -H\n"
+"      history      omogući naredbu „history“\n"
+"      ignoreeof    ignorira Ctrl-D; ne završi (ne iziđe iz) ljusku na EOF\n"
+"      interactive-comments  dopusti komentiranje u interaktivnim naredbama\n"
+"      keyword      isto kao -k\n"
+"      monitor      isto kao -m\n"
+"      noclobber    isto kao -C\n"
+"      noexec       isto kao -n\n"
+"      noglob       isto kao -f\n"
+"      nolog        (prepoznata, ali se ignorira)\n"
+"      notify       isto kao -b\n"
+"      nounset      isto kao -u\n"
+"      onecmd       isto kao -t\n"
+"      physical     isto kao -P\n"
+"      pipefail     cjevovod vrati vrijednost izlaznog statusa zadnje "
+"neuspješne\n"
+"                     naredbe ili 0 ako su svi poslovi uspješno završeni\n"
+"      posix        striktno poštuje POSIX standard\n"
+"      privileged   isto kao -p\n"
+"      verbose      isto kao -v\n"
+"      vi           za uređivanje redaka koristi su�elje u „vi“ stilu\n"
+"      xtrace       isto kao -x\n"
+"\n"
+"    Završi s k�dom 0 osim ako je dȃna nevaljana opcija."
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"Ukloni vrijednosti i atribute varijabli i funkcija ljuske.\n"
+"\n"
+"    Za svako IME ukloni odgovarajuću varijablu ili funkciju\n"
+"\n"
+"    Opcije:\n"
+"      -f   tretira svako IME kao funkciju ljuske\n"
+"      -v   tretira svako IME kao varijablu ljuske\n"
+"      -n   tretira svako IME kao referenciju na neki objekt i ukloni\n"
+"             samu varijablu IME umjesto referiranog objekta\n"
+"\n"
+"    Bez dȃnih opcija, „unset“ prvo pokuša ukloniti varijablu, a ako to\n"
+"    ne uspije, onda pokuša ukloniti funkciju. Neke varijable nije moguće\n"
+"    ukloniti; pogledajte „readonly.\n"
+"\n"
+"    Završi s k�dom 0 osim ako je dȃna nevaljana opcija\n"
+"    ili IME je „samo-za-�itanje“."
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Postavi eksportni atribut na varijable ljuske.\n"
+"\n"
+"    Ozna�i automatski svako dȃno IME za eksport u okolinu za naknadno\n"
+"    izvršavanje naredbi. Ako je dȃna VRIJEDNOST, dodijeli im VRIJEDNOST\n"
+"    prije eksportiranja.\n"
+"\n"
+"    Opcije:\n"
+"      -f   dȃna IMEna se odnose samo na funkcije\n"
+"      -n   ukloni eksportni atribut iz svakoga IMEna \n"
+"      -p   izlista popis svih eksportiranih varijabli i funkcija\n"
+"\n"
+"    Argument „--“ sprije�i daljnje procesiranje opcija.\n"
+"\n"
+"    Završi s k�dom 0 osim ako je dȃna nevaljana opcija\n"
+"    ili dȃno IME nije valjano."
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Ozna�i varijable ljuske kao nepromjenjive.\n"
+"\n"
+"    Ozna�i svako IME kao nepromjenjivo (readonly), tako da se vrijednosti\n"
+"    ovih IMEna ne može promijeniti kasnijim operacijama. Ako je dȃna\n"
+"    VRIJEDNOST, prvo mu dodijeli VRIJEDNOST, a zatim ga ozna�i "
+"nepromjenjivim.\n"
+"\n"
+"    Opcije:\n"
+"      -a  svako IME se odnosi na varijable indeksiranoga polja\n"
+"      -A  svako IME se odnosi na varijable asocijativnoga polja\n"
+"      -f  svako IME se odnosi na funkcije ljuske\n"
+"      -p  prikaže popis svih nepromjenjivih varijabli ili funkcija\n"
+"            ovisno o opciji „-f“ (je li ili nije dȃna).\n"
+"\n"
+"    Argument „--“ onemogući daljnje procesiranje opcija.\n"
+"\n"
+"    Završi s k�dom 0 osim ako je dȃna nevaljana opcija\n"
+"    ili je IME nevaljano."
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"Pomakne položajne parametre.\n"
+"\n"
+"    Preimenuje položajne parametre $N+1,$N+2,... u $1,$2,...\n"
+"    Ako nije dȃni N, uzima se da je N = 1.\n"
+"\n"
+"    Završi s k�dom 0 osim ako je N negativni ili veći od $#."
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Izvrši naredbe iz datoteke u trenutnoj ljusci.\n"
+"\n"
+"    Čita i izvrši naredbe iz DATOTEKE u trenutnoj ljusci.\n"
+"    Direktorij s DATOTEKOM traži se po stazama sadržanima u varijabli\n"
+"    PATH. Ako su dȃni ikoji ARGUMENTI, oni postaju položajni parametri\n"
+"    tijekom izvršavanja DATOTEKE.\n"
+"\n"
+"    Završi s k�dom zadnje izvršene naredbe iz DATOTEKE,\n"
+"    ili sa statusom 1 ako se DATOTEKA ne može pro�itati."
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Obustavi rad ljuske.\n"
+"\n"
+"    Obustavi rad u ovoj ljusci sve dok ne primi SIGCONT signal.\n"
+"    Ako nije prisiljena, rad prijavne ljuske se ne može obustaviti.\n"
+"\n"
+"    Opcije:\n"
+"      -f  prisili obustavu, �ak i ako je to prijavna ljuska\n"
+"\n"
+"    Završi s k�dom 0 osim ako kontrola nad poslovima nije omogućena\n"
+"    ili se dogodila greška."
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"Evaluira uvjetni izraz.\n"
+"\n"
+"    Evaluira dȃni IZRAZ; ovisno o rezultatu evaluacije, završi sa\n"
+"    statusom 0 (istina), ili 1 (neistina, laž). Izrazi mogu biti unarni\n"
+"    ili binarni. Unarni izrazi se �esto koriste za ispitivanje statusa\n"
+"    datoteke. Također postoje operatori za usporedbu stringova i brojeva.\n"
+"\n"
+"    Ponašanje od „test“ ovisi o broju argumenata. Potražite u „bash“\n"
+"    uputama detalje za uporabu.\n"
+"\n"
+"    Operatori za datoteke:\n"
+"        -a DATOTEKA       istina ako datoteka postoji\n"
+"        -b DATOTEKA       istina ako je datoteka blok uređaj\n"
+"        -c DATOTEKA       istina ako je datoteka znakovni uređaj\n"
+"        -d DATOTEKA       istina ako je datoteka direktorij\n"
+"        -e DATOTEKA       istina ako datoteka postoji\n"
+"        -f DATOTEKA       istina ako je datoteka regularna datoteka\n"
+"        -G DATOTEKA       istina ako je datoteka efektivno vlasništvo vaše "
+"grupe\n"
+"        -g DATOTEKA       istina ako je datoteka SETGUID\n"
+"        -h DATOTEKA       istina ako je datoteka simboli�ka veza\n"
+"        -k DATOTEKA       istina ako datoteka ima postavljeni \"sticky\" "
+"bit\n"
+"        -L DATOTEKA       istina ako je datoteka simboli�ka veza\n"
+"        -N DATOTEKA       istina ako se datoteka promijenila od zadnjeg "
+"�itanja\n"
+"        -O DATOTEKA       istina ako je datoteka efektivno vaše vlasništvo\n"
+"        -p DATOTEKA       istina ako je datoteka imenovana cijev\n"
+"        -r DATOTEKA       istina ako vi možete �itati datoteku\n"
+"        -S DATOTEKA       istina ako je datoteka uti�nica\n"
+"        -s DATOTEKA       istina ako datoteka nije prazna\n"
+"        -t DESKRIPTOR     istina ako je deskriptor datoteke otvoren u "
+"terminalu\n"
+"        -u DATOTEKA       istina ako je datoteka SETUID\n"
+"        -w DATOTEKA       istina ako vi možete pisati datoteku\n"
+"        -x DATOTEKA       istina ako vi možete izvršiti datoteku\n"
+"\n"
+"      DTEKA1 -nt DTEKA2   istina ako je prva datoteka promijenjena\n"
+"                            kasnije od druge\n"
+"      DTEKA1 -ot DTEKA2   istina ako je prva datoteka promijenjena\n"
+"                            ranije od druge\n"
+"      DTEKA1 -ef DTEKA2   istina ako je prva datoteka �vrsta veza na drugu\n"
+"\n"
+"    Operatori za stringove:\n"
+"        -z STRING         istina ako je string prazni\n"
+"        -n STRING         istina ako string nije prazni\n"
+"        STRING            istina ako string nije prazni\n"
+"      STRING1 = STRING2   istina ako su stringovi jednaki\n"
+"      STRING1 != STRING2  istina ako stringovi nisu jednaki\n"
+"      STRING1 < STRING2   istina ako se leksikografski prvi string\n"
+"                            razvrsta ispred drugoga\n"
+"      STRING1 > STRING2   istina ako se leksikografski prvi string\n"
+"                            razvrsta iza drugoga\n"
+"\n"
+"    Ostali operatori:\n"
+"        -o OPCIJA         istina ako je ova OPCIJA ljuske omogućena\n"
+"        -v VARIJABLA      istina ako ova VARIJABLA ima vrijednost\n"
+"        -R VARIJABLA      istina ako je ova VARIJABLA referencija "
+"(nameref) \n"
+"        ! IZRAZ           istina ako IZRAZ neistiniti\n"
+"      IZRAZ1 -a IZRAZ2    istina ako su oba izraza istinita\n"
+"      IZRAZ1 -o IZRAZ2    laž ako su oba izraza neistinita\n"
+"      ARG1 OP ARG2        istina ako je aritmetika valjana; operator OP je\n"
+"                            jedan od: -eq, -ne, -lt, -le, -gt, ili -ge;\n"
+"                            koji zna�e: jednako, nejednako, manje od, "
+"manje,\n"
+"                            ili jednako, veće od, veće ili jednako.\n"
+"\n"
+"    Završi s k�dom 0 ako je IZRAZ istiniti, 1 ako je IZRAZ neistiniti,\n"
+"    ili 2 ako je dȃn nevaljani argument."
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Provjeri uvjetni izraz.\n"
+"\n"
+"    To je sinonim za ugrađenu funkciju „test“, ali zadnji argument\n"
+"    mora biti zagrada „]“ kao par zagradi „[“ na po�etku."
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Prikaže potrošnju vremena procesa.\n"
+"    \n"
+"    Prikaže ukupno potrošeno vrijeme korisnikom i sustavom; prvo, vrijeme\n"
+"    potrošeno samom ljuskom, a zatim svim potomcima pokrenutih ljuskom.\n"
+"\n"
+"    Završi uvijek s k�dom 0."
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"Prikupljanje (hvatanje) signala i drugih događaja.\n"
+"\n"
+"    Definira i aktivira postupke rukovanja koji se pokrenu k�d ljuska\n"
+"    primi signal ili se dogodi neki drugi slu�aj.\n"
+"\n"
+"    ARGUMENT je naredba koja se pro�ita i izvrši k�d ljuska primi jedan od\n"
+"    specificiranih signala (SIGNAL_SPEC). Ako nema ARGUMENTA (i dȃn je samo\n"
+"    jedan signal), ili ARGUMENT je „-“, specificirani signal zadobije svoju\n"
+"    originalnu vrijednost (koju je imao na startu ove ljuske). Ako je "
+"ARGUMENT\n"
+"    prazni string, ljuska i njezini potomci ignoriraju svaki SIGNAL_SPEC.\n"
+"\n"
+"    Ako je SIGNAL_SPEC 0 ili EXIT, ARGUMENT se izvrši k�d zatvorite\n"
+"    (exit) ljusku. Ako je SIGNAL_SPEC DEBUG, ARGUMENT se izvrši prije\n"
+"    svake jednostavne naredbe. Ako je SIGNAL_SPEC RETURN, ARGUMENT se\n"
+"    izvrši svaki put k�d funkcija ljuske ili skripta izvršena s . ili\n"
+"    „ugrađeni source“ završi izvršavanje. SIGNAL_SPEC ERR zna�i da se\n"
+"    ARGUMENT izvrši nakon neuspješne naredbe koja bi uzrokovala da ljuska\n"
+"    završi (exit) k�d je opcija „-e“ omogućena.\n"
+"\n"
+"    Bez argumenta, „trap“ izlista popis koji pokaže asocijaciju\n"
+"    između naredbi i signala.\n"
+"\n"
+"    Opcije:\n"
+"      -l   popis imena signala i njihov odgovarajući broj\n"
+"      -p   pokaže koja naredba je povezana na svaki dȃni signal\n"
+"\n"
+"    Svaki je SIGNAL_SPEC ili ime signala iz <signal.h> ili broj signala.\n"
+"    Signal se može poslati ljusci s „kill -signal $$“.\n"
+"\n"
+"    Završi s k�dom 0 osim ako SIGNAL_SPEC nije valjani\n"
+"    ili je dȃna nevaljana opcija."
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"Informacije o tipu naredbe.\n"
+"\n"
+"    Za svako dȃno IME pokaže kako će se interpretirati\n"
+"    ako se koristi kao naredba.\n"
+"\n"
+"    Opcije:\n"
+"     -a   pokaže sve lokacije koje sadrže izvršnu datoteku IME; uklju�uje i\n"
+"            lokacije s aliasima, ugrađenim naredbama i funkcijama, ali onda\n"
+"            i samo onda ako nije dȃna opcija „-p“\n"
+"     -f   ignorira funkcije kao da nisu definirane\n"
+"     -P   traži dȃno IME po stazama definiranim u PATH (također ako je IME\n"
+"            alias, ugrađena naredba (builtin) ili funkcija)\n"
+"            i ispiše puni naziv datoteke na disku koja bi se izvršila\n"
+"     -p   ispiše puni naziv datoteke na disku koja bi se izvršila ili\n"
+"            ništa ako je IME alias, ugrađena naredba (builtin) ili funkcija\n"
+"     -t   ispiše samo tip navedenih IMEna: „alias“, „builtin“, „file“,\n"
+"            „function“ ili „keyword“, ovisno o tome je li rije� o aliasu,\n"
+"            ugrađenoj funkciji (builtin), datoteci na disku, definiranoj\n"
+"            funkciji ili klju�noj rije�i; ili ništa, ako je ime nepoznato\n"
+"\n"
+"    Završi s k�dom 0 ako se pronađu sva IMEna, ina�e s 1."
+
+#: builtins.c:1431
+#, fuzzy
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Upravlja i modificira ograni�enja ljuske.\n"
+"\n"
+"    Omogući upravljanje s resursima koji su dostupni ovoj ljusci i\n"
+"    procesima koje kreira -- na sustavima koji to dopuštaju.\n"
+"\n"
+"    Opcije:\n"
+"      -S    rabi „mekano“ (soft) ograni�enje resursa\n"
+"      -H    rabi „tvrdo“ (hard) ograni�enje resursa\n"
+"      -a    popis svih trenutnih ograni�enja\n"
+"      -b    maks. veli�ina međuspremnika uti�nice\n"
+"      -c    maks. veli�ina „core“ datoteka (u kB)\n"
+"      -d    maks. veli�ina segmenta s procesnim podacima (in kB)\n"
+"      -e    maks. prioritet raspoređivanja („nice“ vrijednost)\n"
+"      -f    maks. veli�ina datoteka ljuska i njeni potomci mogu zapisati\n"
+"      -i    maks. broj signala koji može biti na �ekanju\n"
+"      -l    maks. veli�ina koju proces može zaklju�ati u memoriju\n"
+"      -k    maks. broj rezerviranih/dodijeljenih „kqueues“ za taj proces\n"
+"      -m    maks. iznos fizi�ke memorije procesa (in kB)\n"
+"      -n    maks. broj otvorenih deskriptora datoteka\n"
+"      -p    maks. veli�ina međuspremnika cijevi\n"
+"      -q    maks. broj bajtova za red POSIX poruka\n"
+"      -r    maks. prioritet raspoređivanja u realnom vremenu\n"
+"      -s    maks. veli�ina snopa (stack) (u kB)\n"
+"      -t    maks. iznos CPU vremena (u sekundama)\n"
+"      -u    maks. broj korisni�kih procesa\n"
+"      -v    maks. veli�ina virtualne memorije (u kB)\n"
+"      -x    maks. broj datote�nih brava (lokota, locks)\n"
+"      -P    maks. broj pseudo terminala\n"
+"      -T    maks. broj dretvi\n"
+"\n"
+"    Nisu sve opisane opcije dostupne na svim platformama.\n"
+"\n"
+"    Ako je specificirani, LIMIT postane nova vrijednost za specificirani\n"
+"    resurs, ina�e se prikažu trenutne vrijednosti. Specijalne vrijednosti,\n"
+"    „soft“, „hard“, i „unlimited“ su trenutni soft limit, trenutni hard\n"
+"    limit i unlimited. Ako nijedna opcija nije specificirana, podrazumijeva\n"
+"    se da je aktivna „-f“ opcija.\n"
+"\n"
+"    Vrijednosti su višekratnik od 1024 bajta, osim za „-t“ koji je\n"
+"    u sekundama, „-p“ koji je višekratnik od 512 bajta i „-u“ je apsolutni\n"
+"    broj procesa.\n"
+"\n"
+"    Završi s k�dom 0 osim ako je dȃna nevaljana opcija\n"
+"    ili se dogodila greška."
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"Prikaže ili postavi masku prilikom kreiranje datoteke.\n"
+"\n"
+"    Postavi masku datoteke koju kreira korisnik na MODE.\n"
+"    Ako MODE nije dȃn, ispiše trenutnu vrijednost maske.\n"
+"\n"
+"    Ako MODE po�inje sa znamenkom, interpretira se kao oktalni broj;\n"
+"    ina�e to je simboli�ki mode string kakav prihvaća chmod(1).\n"
+"\n"
+"    Opcije:\n"
+"      -p   ako nije dȃn MODE, generira izlaz u formatu\n"
+"             koji se može iskoristiti kao ulaz\n"
+"      -S   napravi simboli�ki izlaz; ina�e izlaz je oktalni broj\n"
+"\n"
+"    Završi s k�dom 0 osim ako MODE nije valjan\n"
+"    ili je dȃna  nevaljana opcija."
+
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"Čeka da posao završi i vrati njegov izlazni status.\n"
+"\n"
+"    Čeka na svaki posao identificirani s ID — to jest indikatorom posla ili\n"
+"    indikatorom procesa — i izvijesti njegov završni status. Ako nije dȃn\n"
+"    ID, �eka na sve trenutno aktivne potomke, a završni status je nula.\n"
+"    Ako je ID specifikacija posla, �eka na sve procese u cjevovodu tog "
+"posla.\n"
+"\n"
+"    Ako je dȃna opcija „-n“, �eka na završetak sljedećeg posla i vrati\n"
+"    njegov izlazni status.\n"
+"\n"
+"    Ako je dȃna opcija „-f“ i kontrola nad poslovima je omogućena, �eka dok\n"
+"    specificirani ID ne završi, umjesto da promijeni status.\n"
+"\n"
+"    Završi s k�dom zadnjeg ID-a, a s k�dom 1 ako je ID nevaljani\n"
+"    ili je dȃna nevaljana opcija."
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"Čeka da proces završi i vrati njegov izlazni status.\n"
+"\n"
+"    Čeka na svaki proces identificirani s PID i izvijesti njegov završni\n"
+"    status. Ako nije dȃn PID, �eka na sve trenutno aktivne potomke,\n"
+"    a završni status je nula. PID mora biti proces ID.\n"
+"\n"
+"    Završi s k�dom zadnjeg PID-a, s k�dom 1 ako je PID nevaljani,\n"
+"    ili s 2 ako je dȃna nevaljana opcija."
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Izvrši naredbe za svakoga �lana u popisu.\n"
+"\n"
+"    Petlja „for“ izvrši sekvenciju naredbi za svakoga �lana u popisu "
+"stavki.\n"
+"    Ako nema operanda „in RIJEČIMA...;“, podrazumijeva se operand\n"
+"    „in \"$@\"“. Svakom elementu u RIJEČIMA, IME se postavi na taj element\n"
+"    i izvrše se NAREDBE.\n"
+"\n"
+"    Završi s k�dom zadnje izvršene naredbe."
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Aritmeti�ka „for“ petlja.\n"
+"\n"
+"    Isto kao:\n"
+"\n"
+"        (( EXP1 )); while (( EXP2 )); do NAREDBE; (( EXP3 )); done\n"
+"\n"
+"    EXP1, EXP2, EXP3 su aritmeti�ki izrazi. Ako bilo koji izraz nije\n"
+"    dȃn, uzima se da mu je vrijednost jednaka 1.\n"
+"\n"
+"    Završi s k�dom zadnje izvršene naredbe."
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Pripremi izbornik i izvrši izabrane naredbe.\n"
+"\n"
+"    Proširenjem RIJEČI, „select“ generira i prikaže izbornik na standardnom\n"
+"    izlazu za greške s brojem ispred svake rije�i. Ako operand „u RIJEČIMA“\n"
+"    nije dȃn, podrazumijeva se operand „in \"$@\"“.\n"
+"    Nakon izbornika prikaže se PS3 prompt i redak se �ita iz standardnoga\n"
+"    ulaza; ako se redak sastoji od broja koji odgovara jednoj od prikazanih\n"
+"    rije�i, onda varijabla IME dobije vrijednost te rije�i; ako je redak\n"
+"    prazan, RIJEČI i prompt se ponovno prikažu; ako se pro�ita EOF „select“\n"
+"    naredba završi s poslom. Bilo koja druga vrijednost koja se pro�ita "
+"u�ini\n"
+"    da se IME isprazni (nulira). Pro�itani redak spremi se u varijablu "
+"REPLY.\n"
+"    NAREDBE se izvršavaju nakon svakog izbora, tako dugo dok „break“ "
+"naredba\n"
+"    ne prekine posao.\n"
+"\n"
+"    Završi s k�dom zadnje izvršene naredbe."
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"Prikaže vrijeme potrošeno cjevovodom.\n"
+"\n"
+"    Nakon završetka izvršavanja CJEVOVODA prikaže sažetak statistike\n"
+"    trošenja vremena: ukupno potrošeno vrijeme, CPU vrijeme potrošeno\n"
+"    korisnikom i CPU vrijeme potrošeno sustavom za izvršavanje naredbi.\n"
+"\n"
+"    Izlazni format se može prilagoditi s varijablom okoline TIMEFORMAT.\n"
+"    Opcija „-p“ ignorira TIMEFORMAT i ispiše izlaz u prenosivom POSIX\n"
+"    formatu.\n"
+"\n"
+"    Završi s izlaznim statusom CJEVOVODA."
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Izvrši naredbe ovisno o slaganju s uzorkom.\n"
+"\n"
+"    Izvrši onu NAREDBU koja odgovara prvom UZORKU koji se podudara s "
+"RIJEÄŒI.\n"
+"    Znak „|“ rabi se za razdvajanje više uzoraka.\n"
+"\n"
+"    Završi s k�dom zadnje izvršene naredbe."
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Izvršavanje uvjetovanih naredbi.\n"
+"\n"
+"    Prvo izvrši zadatke iza „if“; ako „if“ završi s k�dom nula, izvrši\n"
+"    zadatke iza prvog „then“; ina�e, izvrše se zadatci iza sljedećeg „elif“\n"
+"    (ako postoji), ili „else“ (ako postoji). Ako „elif“ završi s k�dom\n"
+"    nula, izvrše se zadatci iza odgovarajućih „then“. Ako više nema „elif“,\n"
+"    ili „else“, ili nakon izvršenja zadataka iza „then“, „if“ naredba "
+"završi.\n"
+"\n"
+"    „if“ završi s k�dom zadnjeg izvršenoga zadatka."
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Izvršava naredbe tako dugo dok je test uspješan.\n"
+"\n"
+"    Izvršava sukcesivne NAREDBE tako dugo dok zadnja naredba u\n"
+"    „while“ NAREDBI Završi s k�dom 0.\n"
+"\n"
+"    Završi s k�dom zadnje izvršene naredbe."
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Izvršava naredbe tako dugo dok test ne uspije.\n"
+"\n"
+"    Izvršava sukcesivne NAREDBE tako dugo dok zadnja naredba u\n"
+"    „until“ NAREDBAMA završi s k�dom razli�itim od nule.\n"
+"\n"
+"    Završi s k�dom zadnje izvršene naredbe."
+
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"Kreira coprocess (suproces) s imenom IME.\n"
+"\n"
+"    Izvrši NAREDBU asinkrono, sa standardnim izlazom i standardnim ulazom\n"
+"    naredbe spojene preko cijevi na deskriptore datoteke dodijeljene\n"
+"    indeksima 0 i 1 varijable polja IME u izvršnoj ljusci.\n"
+"    Zadano, IME je \"COPROC\".\n"
+"\n"
+"    Naredba coproc završi s k�dom 0."
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"Definira funkciju ljuske.\n"
+"\n"
+"    Kreira funkciju ljuske nazvanu IME. K�d se pokrene kao jednostavna\n"
+"    naredba, IME izvrši NAREDBE unutar konteksta ljuske pozivanja.\n"
+"    K�d se IME pozove, argumenti se proslijede funkciji kao $0...$N,\n"
+"    a ime funkcije je $FUNCNAME.\n"
+"\n"
+"    Završi s k�dom 0 osim ako je IME readonly (samo-za-�itanje)."
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Grupira naredbe u jednu cjelinu.\n"
+"\n"
+"    Izvrši skup naredbi kao grupu. To je jedan od na�ina za preusmjeravanje\n"
+"    �itavog skupa naredbi\n"
+"\n"
+"    Završi s k�dom zadnje izvršene naredbe."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"Nastavi posao u interaktivnom na�inu.\n"
+"\n"
+"    Nastavi dȃni obustavljeni ili pozadinski posao u interaktivnom m�du\n"
+"    To je ekvivalentno naredbi „fg“. JOBSPEC može specificirati\n"
+"    ili ime posla ili broj posla.  Ako „&“ slijedi iza JOBSPEC\n"
+"    onda posao prelazi u pozadinu. To je ekvivalentno naredbi „bg“\n"
+"\n"
+"    Završi s k�dom nastavljenoga posla."
+
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Izra�una aritmeti�ki izraz.\n"
+"\n"
+"    IZRAZ se izra�una po aritmeti�kim pravilima.\n"
+"    To je isto kao \"let IZRAZ\".\n"
+"\n"
+"    Završi s k�dom 1 ako je rezultat IZRAZA jednaki 0;\n"
+"    ina�e završi s k�dom 0."
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"Izvrši uvjetnu naredbu.\n"
+"\n"
+"    Evaluira dani uvjetni IZRAZ; ovisno o rezultatu evaluacije završi sa\n"
+"    statusom 0 (istina) ili 1 (neistina, laž).  Izrazi koriste iste osnovne\n"
+"    komponente koje koristi ugrađena naredba (builtin) „test“, i mogu se\n"
+"    kombinirati sa sljedećim operatorima:\n"
+"\n"
+"        ( IZRAZ )     vrati vrijednost danoga IZRAZa\n"
+"        ! IZRAZ       istina ako je IZRAZ istina, ina�e laž\n"
+"        IZRAZ1 && IZRAZ2    istina ako su oba izraza istinita, ina�e laž\n"
+"        IZRAZ1 || IZRAZ2    laž ako su oba izraza neistinita, ina�e istina\n"
+"\n"
+"    Ako se rabe operatori „==“ ili „!=“, onda se string desno od operatora\n"
+"    smatra za uzorak i  provodi se podudaranje uzoraka.\n"
+"    Ako se rabi operator „=~“, onda se string na desno od operatora "
+"podudara\n"
+"    kao regularni izraz.\n"
+"\n"
+"    Operatori „&&“ i „|| ne evaluiraju IZRAZ2 ako je IZRAZ1 dovoljan za\n"
+"    određivanje kona�nog rezurlata.\n"
+"\n"
+"    Završi s k�dom 0 ili 1 ovisno o IZRAZU."
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"Zna�enje i upotreba standardnih varijabli ljuske.\n"
+"\n"
+"    U nastavku je opis brojnih varijabli od kojih neke sadrže popis\n"
+"    elemenata. U svakom od tih popisa elementi su razdvojeni dvoto�kama.\n"
+"\n"
+"    BASH_VERSION  ina�ica ovog „bash“ programa\n"
+"    CDPATH        popis direktorija u kojima se traži direktorij\n"
+"                    k�d argument od „cd“ (direktorij) nije u\n"
+"                    trenutnom radnom direktoriju\n"
+"    GLOBIGNORE    popis uzoraka koji opisuju imena datoteka koje\n"
+"                    se ignoriraju prilikom ekspanzije imena staza\n"
+"    HISTFILE      ime datoteke koja sadrži povijest vaših naredbi\n"
+"    HISTFILESIZE  maksimalni broj redaka datoteke s povijesti naredba\n"
+"    HISTIGNORE    popis uzoraka koji opisuju naredbe koje ne treba zapisati\n"
+"                    u datoteku koja sadrži povijest vaših naredbi\n"
+"    HISTSIZE      maksimalni broj redaka koje trenutna ljuska može "
+"dosegnuti\n"
+"    HOME          puni naziv staze do vašega osobnoga direktorija\n"
+"    HOSTNAME      ime ra�unala na kojem se izvršava „bash“\n"
+"    HOSTTYPE      tip CPU-a na kojem se izvršava „bash“\n"
+"    IGNOREEOF     broj ignoriranih Ctrl-D (EOF) prije zatvaranja ljuske\n"
+"    MACHTYPE      tip ra�unala na kojem se izvršava „bash“\n"
+"    MAILCHECK     kako �esto (u sekundama) „bash“ gleda ima li nove pošte\n"
+"    MAILPATH      popis datoteka koje „bash“ provjeri za novu poštu\n"
+"    OSTYPE        distribucija Unix-a no kojem se izvršava ovaj „bash“\n"
+"    PATH          popis direktorija u kojima se traže naredbe\n"
+"    PROMPT_COMMAND  naredba koja se izvrši prije ispisa primarnoga prompta\n"
+"    PS1           string koji opisuje primarni prompt\n"
+"    PS2           string koji opisuje sekundarni prompt (zadano, „>“)\n"
+"    PWD           puni naziv staze trenutnog radnoga direktorija\n"
+"    SHELLOPTS     popis svih omogućenih opcija ljuske\n"
+"    TERM          naziv vrste trenutnog terminala\n"
+"    TIMEFORMAT    pravilo za format ispisa „time“ statistika\n"
+"    auto_resume   ako nije prazan, u�ini da se naredbena rije� na "
+"naredbenom\n"
+"                    retku prvo potraži na popisu obustavljenih poslova,\n"
+"                    i ako se tamo pronađe, taj se posao premjesti u\n"
+"                    interaktivni m�d; vrijednost „exact“ zna�i da naredbena\n"
+"                    rije� mora strikno podudariti naredbu iz popisa;\n"
+"                    vrijednost „substring“ zna�i da naredbena rije� mora\n"
+"                    podudariti podstring naredbe iz popisa; bilo koja druga\n"
+"                    vrijednost zna�i da naredbena rije� mora biti prefiks\n"
+"                    obustavljene naredbe\n"
+"    histchars     znakovi koje upravljaju s proširenjem i brzom "
+"supstitucijom\n"
+"                    povijesti; prvi znak je znak za „supstituciju\n"
+"                    povijesti“, obi�no „!“; drugi znak je „znak brze\n"
+"                    supstitucije“, obi�no „^“; treći znak je „komentar\n"
+"                    povijesti“, obi�no „#“.\n"
+
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Doda direktorije na snop.\n"
+"\n"
+"    Doda direktorij na vrh snopa direktorija ili zarotira snop tako da\n"
+"    u�ini novi vrh snopa trenutnim radnim direktorijem. Bez argumenata\n"
+"    razmijeni pozicije dva direktorija na vrhu snopa.\n"
+"\n"
+"    Opcije:\n"
+"      -n   izostavi uobi�ajenu promjenu direktorija k�d dodaje\n"
+"           direktorije u snop, odnosno samo manipulira sa snopom\n"
+"\n"
+"    Argumenti:\n"
+"      DIREKTORIJ  Doda DIREKTORIJ na vrh snopa direktorija i\n"
+"                    u�ini ga novim aktualnim radnim direktorijem.\n"
+"      +N   Zarotira snop tako, da N-ti direktorij u snopu (brojeći od nule "
+"s\n"
+"             lijeve strane popisa prikazanoga s „dirs“) postane novi vrh "
+"snopa.\n"
+"      -N   Zarotira snop tako, da N-ti direktorij u snopu (brojeći od nule "
+"s\n"
+"             desne strane popisa prikazanoga s „dirs“) postane novi vrh "
+"snopa.\n"
+"\n"
+"      Naredba „dirs“ prikaže trenutni sadržaj snopa direktorija.\n"
+"\n"
+"    Završi s k�dom 0 osim ako je dȃna nevaljana opcija\n"
+"    ili nije uspjela promjena direktorija."
+
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Ukloni direktorije iz snopa.\n"
+"\n"
+"    Ukloni direktorije iz snopa direktorija. Bez argumenata, ukloni\n"
+"    direktorij na vrhu snopa i premjesti se u novi najviši direktorij.\n"
+"\n"
+"    Opcije:\n"
+"      -n   izostavi uobi�ajenu promjenu direktorija k�d uklanja\n"
+"           direktorije iz snopa, odnosno samo manipulira sa snopom\n"
+"\n"
+"    Argumenti:\n"
+"      +N   Ukloni da N-ti direktorij iz snopa brojeći od nule s lijeve\n"
+"             strane popisa prikazanoga s „dirs“. Na primjer: „popd +0“\n"
+"             ukloni prvi, a „popd +1“ ukloni drugi direktorij.\n"
+"      +N   Ukloni da N-ti direktorij iz snopa brojeći od nule s desne\n"
+"             strane popisa prikazanoga s „dirs“. Na primjer.: „popd -0“\n"
+"             ukloni zadnji, a „popd -1“ ukloni predzadnji direktorij.\n"
+"\n"
+"    Naredba „dirs“ prikaže trenutni sadržaj snopa direktorija.\n"
+"\n"
+"    Završi s k�dom 0 osim ako je dȃna nevaljana opcija\n"
+"    ili nije uspjela promjena direktorija."
+
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Ispiše sadržaj snopa direktorija.\n"
+"\n"
+"    Pokaže popis trenutno zapamćenih direktorija. Direktoriji se unose\n"
+"    na popis pomoću naredbe „pushd“, a s naredbom „popd“ se uklanjaju.\n"
+"    \n"
+"    Opcije:\n"
+"      -c   po�isti snop direktorija brisanjem svih elemenata\n"
+"      -l   ispiše apsolutne staze direktorija u odnosu na osobni\n"
+"             direktorij (ne skraćuje staze upotrebom tilde)\n"
+"      -p   ispiše sadržaj snopa po jedan direktorij po retku\n"
+"      -v   kao „-p“, ali s prefiksom koji pokazuje\n"
+"             poziciju direktorija snopu\n"
+"\n"
+"    Argumenti:\n"
+"      +N   Pokaže N-ti direktorij iz snopa, brojeći od od nule s\n"
+"             lijeve strane popisa k�d se „dirs“ pokrene bez opcija.\n"
+"      -N   Pokaže N-ti direktorij iz snopa, brojeći od nule s\n"
+"             desne strane popisa k�d se „dirs“ pokrene bez opcija.\n"
+"\n"
+"    Završi s k�dom 0 osim ako je dȃna nevaljana opcija\n"
+"    ili se dogodila greška."
+
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"Uklju�i ili isklju�i opcije ljuske.\n"
+"\n"
+"    Promjeni postavku svakoj opciji ljuske IME_OPCIJE. Bez ikakvih opcija i\n"
+"    argumenta, „shopt“ izlista sve opcije ljuske pokazujući je li, ili nije\n"
+"    uklju�ena.\n"
+"\n"
+"    Opcije:\n"
+"      -o   ograni�i IME_OPCIJE na ona koja su definirana\n"
+"             za upotrebu sa „set -o“\n"
+"      -p   generira izlaz koji se može koristi za ulaz\n"
+"      -q   izostavi izlaz (ništa ne ispisuje)\n"
+"      -s   omogući (uklju�i) sve dȃne IME_OPCIJE\n"
+"      -u   onemogući (isklju�i) sve dȃne IME_OPCIJE\n"
+"\n"
+"    Bez opcija (ili samo s „-q“ opcijom) Završi s k�dom 0 ako je IME_OPCIJE\n"
+"    uklju�eno, a s 1 ako je isklju�eno. Završi također s 1 ako je dȃno\n"
+"    nevaljano ime opcije, a završi s 2 ako je dȃna nevaljana opcija."
+
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"Oblikuje ispis ARGUMENATA prema pravilima FORMATA.\n"
+"\n"
+"    Ispiše dane ARGUMENTE u danom FORMATU.\n"
+"\n"
+"    Opcije:\n"
+"      -v VARIJABLA  preusmjeri (dodijeli) izlaz (ispis) u VARIJABLU\n"
+"                    umjesto na standardni izlaz\n"
+"\n"
+"    FORMAT je znakovni string koji sadrži tri vrste objekta:\n"
+"    obi�ne znakove koji se jednostavno kopiraju na izlaz; kontrolne znakove\n"
+"    (maskirane sekvencije) koji se pretvore i kopiraju na izlaz; i\n"
+"    specifikacije formata od kojih svaka uzrokuje ispisivanje sljedećeg\n"
+"    sukcesivnoga argumenta.\n"
+"\n"
+"    Pored standardnih simbola za format opisanih u printf(1),\n"
+"    printf dodatno interpretira:\n"
+"      %b       proširi maskirane sekvencije s obratnom kosom crtom\n"
+"                 (backslash escape sequences) u relevantim argumentima\n"
+"      %q       citira argument tako, da se može iskoristiti kao ulaz\n"
+"      %(fmt)T  ispis vremena rezultira upotrebom FMT kao\n"
+"                 format stringa za strftime(3)\n"
+"\n"
+"    Dani format se koristi sve dok se ne potroše svi argumenti. Ako ima\n"
+"    manje od o�ekivanoga broja argumenata, suvišne format specifikacije\n"
+"    se ponašaju kao da im je vrijednost nula, ili prazni string.\n"
+"\n"
+"    Završi s k�dom 0 osim ako je dana nevaljana opcija\n"
+"    ili se dogodila greška u pisanju ili greška pri dodijeli."
+
+#: builtins.c:1971
+#, fuzzy
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Specificira kako „readline“ treba kompletirati argumente.\n"
+"\n"
+"    Za svako dȃno IME specificira kako se kompletiraju argumenti. Bez\n"
+"    dȃnih opcija ispiše postojeće specifikacije koje se mogu ponovno\n"
+"    iskoristiti kao ulaz.\n"
+"\n"
+"    Opcije:\n"
+"      -p   ispiše postojeće specifikacije kompletiranja u formatu\n"
+"             upotrebljivom za ulaz\n"
+"      -r   ukloni specifikaciju kompletiranja za svako dȃno IME\n"
+"             ili ukloni sve specifikacije ako nisu dȃna IMENA\n"
+"      -D   na naredbe koje nemaju vlastitu specifikaciju za kompletiranje\n"
+"             primjeni „zadano“ ponašanje specifikacija i akcija\n"
+"      -E   primjeni zadano ponašanje specifikacija i akcija i na „prazne“\n"
+"             naredbe --; pokuša kompletirati prazni redak\n"
+"      -I   primjeni zadano ponašanje specifikacija i akcija i na po�etnu\n"
+"             (obi�no naredbu) rije�\n"
+"\n"
+"    Redoslijed akcija pri pokušaju kompletiranja slijedi gore dȃni poredak\n"
+"    opcija pisanih u verzalu. Opcija „-D“ ima veći prioritet od opcije „-"
+"E“.\n"
+"    a obje imaju veći prioritet od opcije „-I“\n"
+"\n"
+"    Završi s k�dom 0 osim ako je dȃna nevaljana opcija\n"
+"    ili se dogodila greška."
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Prikaže moguća kompletiranja ovisno o opcijama.\n"
+"\n"
+"    „compgen“ je namijenjen za upotrebu unutar funkcije koja generira\n"
+"    moguća kompletiranja. Ako je dȃna neobvezna opcija RIJEČ, generira\n"
+"    samo moguća kompletiranja podudarna s opcijom RIJEČ.\n"
+"\n"
+"    Završi s k�dom 0 osim ako je dȃna nevaljana opcija\n"
+"    ili se dogodila greška."
+
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"Izmjena ili prikaz opcija za kompletiranje.\n"
+"\n"
+"    Izmijenite opcije kompletiranja za svako IME u skladu s opcijama,\n"
+"    ili za kompletiranje koje se trenutno vrši ako nisu dȃna IMEna.\n"
+"    Ako nema opcija, ispišu se opcije kompletiranja za svako IME ili\n"
+"    za trenutno kompletiranje.\n"
+"\n"
+"    Opcije:\n"
+"      -o OPCIJA   ovu OPCIJU kompletiranja postavi za svako IME\n"
+"      -D          promijeni opcije za kompletiranje „zadanih“ naredba\n"
+"      -E          promijeni opcije za kompletiranje „praznih“ naredba\n"
+"      -I          promijeni opcije za kompletiranje za po�etnu rije�\n"
+"\n"
+"    „+“ umjesto „-“ isklju�i odgovarajuću opciju.\n"
+"\n"
+"    Svako IME ukazuje na naredbu za koju specifikacija kompletiranja mora\n"
+"    već prije biti definirana pomoću ugrađene naredbe „complete“. Ako nije\n"
+"    dȃno nijedno IME, funkcija koja trenutno generira kompletiranja mora\n"
+"    pozvati „compopt“; time se onda promjene opcije za taj generator koji\n"
+"    trenutno izvršava kompletiranja.\n"
+"\n"
+"    Završi s k�dom 0 osim ako nije dȃna nevaljana opcija\n"
+"    ili nije definirana specifikacija za kompletiranje IMEna."
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"Mapira pro�itane retke iz standardnoga ulaza u varijablu tipa polje.\n"
+"\n"
+"    U�itane retke iz standardnoga ulaza mapira u indeksiranu varijablu "
+"POLJE.\n"
+"    Ako nema argumenta POLJE, koristi se (zadano) varijabla MAPFILE.\n"
+"\n"
+"    Opcije:\n"
+"      -d ME�A      prvi znak u ME�I (umjesto LF) je znak za kraj retka\n"
+"      -n BROJ      kopira ne više od BROJ redaka (0 zna�i sve retke)\n"
+"      -O POČETAK   mapiranje zapo�inje s indeksom POČETAK (zadano 0)\n"
+"      -s BROJ      presko�i (izostavi) prvih BROJ redaka\n"
+"      -t           ukloni zaostalu ME�U (zadano LF) iz svakog u�itanoga "
+"retka\n"
+"      -u FD        �ita retke iz FD (deskriptora datoteke) umjesto iz stdin\n"
+"      -C FUNKCIJA  evaluira FUNKCIJU nakon svako TOLIKO pro�itanih redaka\n"
+"      -c TOLIKO    nakon svako TOLIKO pro�itanih redaka pozove FUNKCIJU\n"
+"\n"
+"    Argument:\n"
+"      POLJE        ime varijable polja u koju se mapiraju pro�itani redci\n"
+"\n"
+"    Ako je opcija „-C“ dȃna bez opcije „-c“, TOLIKO je 5000 (zadano).\n"
+"    K�d FUNKCIJA evaluira — dobiva indeks sljedećeg elementa polja koji se\n"
+"    mapira i redak koji će biti dodijeljen tom elementu — kao dodatne "
+"argumente.\n"
+"\n"
+"    Ako nije dȃni eksplicitni POČETAK, „mapfile“ po�isti polje\n"
+"    prije po�etka mapiranja.\n"
+"\n"
+"    Završi s k�dom 0 osim ako je POLJE readonly (samo-za-�itanje)\n"
+"    ili nije polje; ili je dȃna nevaljana opcija."
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"U�ita retke iz datoteke u varijablu tipa indeksirano polje.\n"
+"\n"
+"    Sinonim za „mapfile“."
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "Vraća kontekst od trenutnog poziva funkciji.\n"
+#~ "    \n"
+#~ "    Bez EXPR, rezultati "
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process(): proces %5ld (%s) u cjevovodu"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "Nepoznati signal #"
+
+#~ msgid "Copyright (C) 2018 Free Software Foundation, Inc."
+#~ msgstr "Copyright (C) 2018 Free Software Foundation, Inc."
+
+#~ msgid ""
+#~ "License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl."
+#~ "html>\n"
+#~ msgstr ""
+#~ "Licenca GPLv2+: GNU GPL ina�ica 2 ili novija <http://gnu.org/licenses/gpl."
+#~ "html>\n"
+
+#~ msgid ":"
+#~ msgstr ":"
diff --git a/po/hu.gmo b/po/hu.gmo
new file mode 100644
index 0000000..08cb511
--- /dev/null
+++ b/po/hu.gmo
diff --git a/po/hu.po b/po/hu.po
new file mode 100644
index 0000000..972911d
--- /dev/null
+++ b/po/hu.po
@@ -0,0 +1,5850 @@
+# Hungarian translation for bash.
+# Copyright (C) 2010, 2016, 2017, 2019 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+#
+# Mate Ory <orymate@ubuntu.com>, 2010, 2016.
+# Gabor Kelemen <kelemeng@gnome.hu>, 2016.
+# Balázs Úr <ur.balazs@fsf.hu>, 2017, 2019.
+msgid ""
+msgstr ""
+"Project-Id-Version: bash 5.0\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2019-11-16 17:58+0100\n"
+"Last-Translator: Balázs Úr <ur.balazs@fsf.hu>\n"
+"Language-Team: Hungarian <translation-team-hu@lists.sourceforge.net>\n"
+"Language: hu\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"X-Generator: Lokalize 19.04.3\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "hibás tömbindex"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr "%s: névhivatkozás attribútum eltávolítása"
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: nem lehetséges az indexelt tömb asszociatívvá alakítása"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: érvénytelen asszociatívtömb-index"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: a nem-szám indexnek való értékadás nem lehetséges"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr "%s: %s: asszociatív tömbhöz való értékadásnál meg kell adni az indexet"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: nem hozható létre: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr ""
+"bash_execute_unix_command: nem található billentyűkiosztás a parancshoz"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: az első nem szóközkarakter nem „\"�"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "nincs záró „%c� a következőben: %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: hiányzó kettőspont-elválasztó"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "„%s�: nem lehetséges a kötés megszüntetése"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr "szögleteszárójel-kiegészítés: Nem foglalható memória ehhez: %s"
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr ""
+"szögleteszárójel-kiegészítés: nem sikerült a memóriafoglalás %u elem számára"
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr ""
+"szögleteszárójel-kiegészítés: nem sikerült a memóriafoglalás „%s� számára"
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "„%s�: érvénytelen alias-név"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "nincs engedélyezve a sorszerkesztés"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "„%s�: érvénytelen billentyűkiosztás-név"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: nem olvasható a következő: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "„%s�: ismeretlen függvénynév"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s nincs kötve egy billentyűhöz sem.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s a következő módon hajtható végre: "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "„%s�: nem lehetséges a kötés megszüntetése"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "ciklusszám"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "csak „for�, „while� és „until� ciklusokban értelmezhető"
+
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Az aktuális szubrutinhívás környezetének visszaadása.\n"
+"    \n"
+"    KIF nélkül \"$sor $fájlnév\" formátumú eredményt ad. A KIF-fel pedig\n"
+"    \"$sor $szubrutin $fájlnév\" formátumút; ez hasznos lehet stack trace\n"
+"    kiírásához.\n"
+"    \n"
+"    Az EXPR értéke azt adja meg, hogy a jelenlegihez képest milyen mélyre\n"
+"    lépjen vissza; a verem tetején a 0-s keret van.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    0-val tér vissza, ha érvényes a KIF és valóban függvényt hajt végre a\n"
+"    parancsértelmező."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "Nincs beállítva HOME"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "túl sok argumentum"
+
+#: builtins/cd.def:342
+msgid "null directory"
+msgstr "null könyvtár"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "Nincs beállítva OLDPWD"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "%d. sor: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "figyelmeztetés: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: használat: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: a kapcsolónak kötelező argumentuma van"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: a kötelező argumentum egy szám"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: nem található"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: érvénytelen kapcsoló"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: érvénytelen kapcsolónév"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "„%s�: érvénytelen azonosító"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "érvénytelen oktális szám"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "érvénytelen hexadecimális szám"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "érvénytelen szám"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: érvénytelen szignálmegadás"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "„%s�: nem pid vagy munkaazonosító"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: csak olvasható változó"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s kívül esik a tartományon"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "argumentum"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s kívül esik a tartományon"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: nincs ilyen munka"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: nincs munkakezelés"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "nincs munkakezelés"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: korlátozott"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "korlátozott"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: nem beépített parancs"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "írási hiba: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "hiba a terminálattribútum beállításakor: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "hiba a terminálattribútum lekérdezésekor: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: hiba a munkakönyvtár lekérdezésekor: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: kétértelmű munkamegadás"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr "ebben a verzióban nem érhető el súgó"
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: nem szüntethető meg: csak olvasható %s"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: nem szüntethető meg"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: érvénytelen műveletnév"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: nincs kiegészítés meghatározva"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "figyelmeztetés: a -F kapcsoló nem a várt módon működhet"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "figyelmeztetés: a -C kapcsoló nem a várt módon működhet"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "jelenleg nincs kiegészítési függvény végrehajtás alatt"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "csak függvényben használható"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr "%s: a referenciaváltozó nem lehet tömb"
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr "%s: a névhivatkozás változó önhivatkozása nem engedélyezett"
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s: körkörös névhivatkozás"
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "„%s�: érvénytelen változónév a névhivatkozáshoz"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "nem használható a „-f� függvény létrehozására"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: csak olvasható függvény"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr "%s: az idézőjelezett összetett tömb értékadása elavult"
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: ilyen módon nem lehet tömböt megszüntetni"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: nem lehetséges az asszociatív tömb indexeltté alakítása"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "a dinamikus betöltés nem érhető el"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "megosztott objektumfájl megnyitása sikertelen: %s: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "%s nem található a(z) %s megosztott objektumfájlban: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: nem dinamikusan van betöltve"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr "%s betöltési függvénye hibát ad vissza (%d): nincs betöltve"
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: nem dinamikusan van betöltve"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: nem törölhető: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s egy könyvtár"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: nem normál fájl"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: a fájl túl nagy"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: bináris nem hajtható végre"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: nem hajtható végre: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "kijelentkezés\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "nem bejelentkező parancsértelmező: használja az „exit�-et"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Vannak leállított munkák.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Vannak futó munkák.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "nincs ilyen parancs"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "előzményválasztás"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: az átmeneti fájl nem nyitható meg: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "aktuális"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "a(z) %d. munka munkakezelés nélkül indult"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: érvénytelen kapcsoló – %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: a kapcsolónak kötelező argumentuma van – %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "a hashelés le van tiltva"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: a hashtábla üres\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "t.szám\tparancs\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "A következő kifejezésre illeszkedő parancsok: „"
+msgstr[1] "A következő kifejezésekre illeszkedő parancsok: „"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"nem illeszkedik egy szócikk sem a következőre: „%s�.\n"
+"A „help help�, „man -k '%s'� vagy „info '%s'� parancsok segíthetnek."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: nem nyitható meg: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Ezek a parancsok be vannak építve a parancsértelmezőbe. A „help� parancs\n"
+"listázza őket. A „help név� a „név� parancsról tájékoztat. Az „info bash�\n"
+"paranccsal általános információt kap a parancsértelmezőről. A listán nem\n"
+"található parancsokról a „man -k� vagy az „info� adhat felvilágosítást.\n"
+"\n"
+"A parancs nevét követő csillag (*) azt jelzi, hogy le van tiltva.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "a következő kapcsolók kizárják egymást: -anrw"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "előzménypozíció"
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: érvénytelen időbélyeg"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: sikertelen előzményből való kiegészítés"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: sikertelen inlib"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "a „-x� mellett nem használható más kapcsoló"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: az argumentumok folyamat- vagy munkaazonosítók lehetnek"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Ismeretlen hiba"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "az értelmező kifejezést várt"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: nem egy indexelt tömb"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: érvénytelen fájlleíró-megadás"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: érvénytelen fájlleíró: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: sorok száma érvénytelen"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: érvénytelen tömbkezdet"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: érvénytelen parancshívási távolság"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "üres tömbváltozó-név"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "a tömbök használata nincs támogatva"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "„%s�: hiányzó formátumkarakter"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "„%c�: érvénytelen időformátum-megadás"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "„%c�: érvénytelen formátumkarakter"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "figyelmeztetés: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "formátumfeldolgozási probléma: %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "hiányzó hexadecimális számjegy a következőhöz: \\x"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "hiányzó unicode számjegy a következőhöz: \\%c"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "nincs másik könyvtár"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s: érvénytelen argumentum"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<nincs munkakönyvtár>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "a könyvtárverem üres"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "könyvtárveremindex"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Megjeleníti a jelenleg megjegyzett könyvtárakat. A könyvtárakat a\n"
+"    „pushd� paranccsal lehet a verembe rakni; és a „popd� paranccsal "
+"kivenni.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -c\ta könyvtárverem törlése az összes elem eltávolításával\n"
+"      -l\ta saját könyvtárat ne rövidítse a listázáskor egy tilde (~)\n"
+"      -p\ta könyvtárverem kiírása soronként egy elemmel\n"
+"      -v\ta könyvtárverem kiírása soronként egy elemmel, a vermen\n"
+"    \tbelüli pozíció jelölésével\n"
+"    \n"
+"    Argumentumok:\n"
+"      +N\tN darab bejegyzést jelenít meg az argumentum nélkül a dirs\n"
+"    \táltal megjelenített listán balról számolva, nullától kezdve.\n"
+"      -N\tN darab bejegyzést jelenít meg az argumentum nélkül a dirs\n"
+"    \táltal megjelenített listán jobbról számolva, nullától kezdve."
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Egy könyvtárat tesz a könyvtárverem tetejére, vagy forgatja a vermet,\n"
+"    az új felső elemmé a jelenlegi munkakönyvtárat téve. Argumentumok\n"
+"    nélkül hívva a két felső könyvtárat cseréli meg.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -n\tNe váltson könyvtárat hozzáadáskor, vagyis csak a\n"
+"    \tvermet változtassa.\n"
+"    \n"
+"    Argumentumok:\n"
+"      +N\tÚgy forgatja a vermet, hogy az N-edik könyvtár (0-tól\n"
+"    \tkezdve, a „dirs� által kiírt listán balról számolva)\n"
+"    \tkerüljön a verem tetejére.\n"
+"    \n"
+"      -N\tÚgy forgatja a vermet, hogy az N-edik könyvtár (0-tól\n"
+"    \tkezdve, a „dirs� által kiírt listán jobbról számolva)\n"
+"    \tkerüljön a verem tetejére.\n"
+"    \n"
+"      dir\tA verem tetejére helyezi KT�R könyvtárat, és ugyanezt\n"
+"    \tállítja be új munkakönyvtárnak.\n"
+"    \n"
+"    A „dirs� beépített parancs listázza a könyvtárvermet."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Elemeket vesz ki a könyvtárveremből. Argumentumok nélkül kiveszi a\n"
+"    legfelső elemet, és a kivett elemre állítja az új munkakönyvtárat.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -n\tNe váltson könyvtárat eltávolításkor, vagyis csak a vermet\n"
+"    \tváltoztassa.\n"
+"    \n"
+"    Argumentumok:\n"
+"      +N\tEltávolítja az N-edik elemet a „dirs� által kiírt listán,\n"
+"    \tnullától, balról számolva. Pl. a „popd +0� az első, míg a\n"
+"    \t„popd +1� a második könyvtárat távolítja el.\n"
+"      -N\tEltávolítja az N-edik elemet a „dirs� által kiírt listán,\n"
+"    \tnullától, jobbról számolva. Pl. a „popd -0� az utolsó,\n"
+"    \ta „popd -1� az utolsó előtti könyvtárat távolítja el.\n"
+"    \n"
+"    A „dirs� beépített parancs listázza a könyvtárvermet."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: érvénytelen időkorlát-megadás"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "olvasási hiba: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr ""
+"csak függvényből vagy source-olt parancsfájlból lehet „return�-nel "
+"visszatérni"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "nem lehet egyszerre függvényt és változót megszüntetni"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: nem egy tömbváltozó"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: nem függvény"
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr "%s: nem exportálható"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "shift-szám"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr ""
+"nem lehet egyszerre beállítani és törölni parancsértelmező-beállításokat"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: érvénytelen parancsértelmezőkapcsoló-név"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "fájlnévargumentum szükséges"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: a fájl nem található"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "nem lehet szüneteltetni"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "nem lehet bejelentkező parancsértelmezőt szüneteltetni"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s egy alias a következőre: „%s�\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s egy parancsértelmező-kulcsszó\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s egy függvény\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s egy speciális beépített parancs\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s egy beépített parancs\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s: %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s hashelve van (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: érvénytelen korlátérték"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "„%c�: érvénytelen parancs"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: nem kérdezhető le a korlát: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "korlát"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: nem módosítható a korlát: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "oktális szám"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "„%c�: érvénytelen szimbolikus módoperátor"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "„%c�: érvénytelen szimbolikus módkarakter"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " sor: "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "utolsó parancs: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Megszakítás..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr "INFORM: "
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "hiba: érvénytelen parancs"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "hibás parancstípus"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "hibás csatlakozó"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "hibás ugrás"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: kötetlen változó"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\aidőtúllépés bemenetre várva: automatikus kijelentkezés\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "szabványos bemenet /dev/null-ra állítása sikertelen: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "ID�FORM�TUM: „%c�: érvénytelen formátumkarakter"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr "execute_coproc: a coproc [%d:%s] még mindig létezik"
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "hibás csővezeték"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr "eval: a maximális eval beágyazási szint túllépve (%d)"
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr "%s: a maximális source beágyazási szint túllépve (%d)"
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr "%s: a maximális függvénybeágyazási szint túllépve (%d)"
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: korlátozott: nem adható meg „/� a parancsok nevében"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: parancs nem található"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: rossz parancsértelmező"
+
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: a bináris nem hajtható végre: %s"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "„%s�: egy speciális beépített parancs"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "nem lehet duplikálni a(z) %d. fájlleírót a(z) %d. helyre"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "a kifejezés rekurziókorlátot"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "alulcsordult a rekurziós verem"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "szintaktikai hiba a kifejezésben"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "nem változóhoz próbált értéket rendelni"
+
+#: expr.c:530
+msgid "syntax error in variable assignment"
+msgstr "szintaktikai hiba a változó-értékadásban"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "0-val osztás"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "bug: rossz expassign token"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "„:� egy feltételkifejezés szükséges"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "0-nál kisebb kitevő"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "prefix növelés vagy csökkentés után azonosító kell következzen"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "hiányzó „)�"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "szintaktikai hiba: operandus kell következzen"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "szintaktikai hiba: érvénytelen aritmetikai operátor"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (hibás token: „%s�)"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "érvénytelen számrendszer"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: sorok száma érvénytelen"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "túl nagy érték a számrendszerhez"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: hibás kifejezés\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: nem érhetőek el a szülőkönyvtárak"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "nem lehet újraindítani a nodelay módot a(z) %d. fájlleíróhoz"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr ""
+"nem lehet új fájlleírót foglalni a bash bemenetéhez a(z) %d. fájlleíróból"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input: már van puffer a(z) %d. fájlleíróhoz"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: pgrp csővezeték"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "a(z) %d számú forkolt pid a(z) %d számú munkában jelent meg"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "%d. számú megállított munka törlése a %ld számú folyamatcsoporttal"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process: %5ld. folyamat (%s) még élőként van jelölve"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: nincs ilyen pid"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "%d. szignál"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Kész"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Megállítva"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Megállítva(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "Fut"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Kész(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Kilépett(%d)"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Ismeretlen állapot"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(core készült) "
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr " (mk: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "gyermek setpgid (innen: %ld ide: %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: %ld. számú folyamat nem gyermeke ennek a parancsértelmezőnek"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: Nincs bejegyzés %ld. számú folyamatról"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: %d. számú munka le lett állítva"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: nincs ilyen munka"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: a munka be lett fejezve"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: %d. számú munka már a háttérben van"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr "waitchld: WNOHANG bekapcsolása a korlátlan blokk elkerülésére"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: %d. sor: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (core készült)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(mk most: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: getpgrp sikertelen"
+
+#: jobs.c:4447
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: nincs munkakezelés a háttérben"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: line discipline"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "nem állítható be a terminál folyamatcsoportja (%d)"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "nincsen munkakezelés ebben a parancsértelmezőben"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: nem teljesülő feltételezés: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d: téves feltételezés\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "ismeretlen"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: a szabadlistán lévő blokk felülírva"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: már felszabadított blokkal lett hívva"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: nem lefoglalt blokkal lett hívva"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: alulcsordulást érzékelt; mh_nbytes kívül esik a tartományon"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: alulcsordulást érzékelt; mh_nbytes kívül esik a tartományon"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: kezdő- és záródarab mérete eltér"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: nem lefoglalt blokkal lett hívva"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc: alulcsordulást érzékelt; mh_nbytes kívül esik a tartományon"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc: alulcsordulást érzékelt; mh_nbytes kívül esik a tartományon"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: kezdő- és záródarab mérete eltér"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: foglalótábla tele van FIND_ALLOC-kal?\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: %p már a táblában lefoglaltként?\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: %p már a táblában szabadként?\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "érvénytelen számrendszer"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: ismeretlen gépnév"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: érvénytelen szolgáltatás"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: hibás hálózatiútvonal-megadás"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "a hálózati műveletek nincsenek támogatva"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: nem lehet területi beállításokat váltani (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: nem lehet területi beállításokat váltani (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: nem lehet területi beállításokat váltani (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: nem lehet területi beállításokat váltani (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "Levél a következőben: $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "Új levél a következőben: $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "A(z) „%s� helyen lévő levél el van olvasva\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "szintaktikai hiba: aritmetikai kifejezés szükséges"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "szintaktikai hiba: váratlan „;�"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "szintaktikai hiba: „((%s))�"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: hibás utasítástípus: %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr "a(z) %d. sorban kezdett heredocot EOF zárja („%s� helyett)"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr "make_redirection: %d. átirányító utasítás kívül esik a tartományon"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+"shell_getc: a shell_input_line_size (%zu) meghaladja a MÉRET_MAXIMUM értékét "
+"(%lu): a sor csonkolva"
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr "a maximális here-document szám túllépve"
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "váratlan EOF „%c� helyett"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "váratlan EOF „]]� helyett"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "szintaktikai hiba a feltételben: váratlan token: „%s�"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "szintaktikai hiba a feltételben"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "váratlan token (%s) „)� helyett"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "„)� szükséges"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "váratlan argumentum (%s) feltételes egyoperandusú operátorhoz"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "váratlan argumentum feltételes egyoperandusú operátorhoz"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "váratlan token (%s), feltételes kétoperandusú operátor szükséges"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "feltételes kétoperandusú operátor szükséges"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "váratlan argumentum (%s) feltételes kétoperandusú operátorhoz"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "váratlan argumentum feltételes kétoperandusú operátorhoz"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "váratlan token (%c) feltételes parancsban"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "váratlan token (%s) feltételes parancsban"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "váratlan token (%d) feltételes parancsban"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "szintaktikai hiba „%s� váratlan token közelében"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "szintaktikai hiba „%s� közelében"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "szintaktikai hiba: váratlan fájlvége"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "szintaktikai hiba"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "„%s� használatával lehet elhagyni a parancsértelmezőt.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "váratlan EOF „)� helyett"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "kiegészítés: nem található „%s� függvény"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr "programmable_completion: %s: lehetséges újrapróbálási hurok"
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: NULL COMPSPEC"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: hibás csatlakozó (%d)"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: érvénytelen fájlleíró"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: NULL fájlmutató"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != fileno xtrace fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: „%c�: érvénytelen formátumkarakter"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "fájlleíró kívül esik a tartományon"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: kétértelmű átirányítás"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: nem lehet felülírni létező fájlt"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: korlátozott: nem lehet átirányítani a kimenetet"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "nem lehet a heredocnak átmeneti fájlt létrehozni: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: nem lehet változóhoz fájlleírót rendelni"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "/dev/(tcp|udp)/host/port nincs támogatva hálózat nélkül"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "átirányítási hiba: nem lehet duplikálni a fájlleírót"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "nem található /tmp, hozza létre!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp érvényes könyvtárnév kell legyen"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr "a csinos kiírási mód mellőzve van interaktív az parancsértelmezőkben"
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: érvénytelen kapcsoló"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "az uid nem állítható be %d értékre: a hatásos uid %d"
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "a gid nem állítható be %d értékre: a hatásos gid %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr "nem indítható el a hibakereső; a hibakeresési mód letiltva"
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr "%s: ez egy könyvtár"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "Nincs nevem!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, %s-(%s) verzió\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Használat:\t%s [GNU hosszú kapcsoló] [kapcsoló] ...\n"
+"\t%s [GNU hosszú kapcsoló] [kapcsoló] parancsfájl ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "GNU hosszú kapcsolók:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Parancsértelmező-kapcsolók:\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-ilrsD vagy -c parancs vagy -O shopt_option\t\t(csak hívás)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s vagy -o kapcsoló\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+"A „%s -c \"help set\"� további információt ad a parancsértelmező-"
+"beállításokról.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr "A „%s -c help� további információt ad a beépített parancsokról.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "A „bashbug� paranccsal jelenthet hibákat.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr "a bash honlapja: <http://www.gnu.org/software/bash>\n"
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr ""
+"�ltalános segítség a GNU szoftverek használatához: <http://www.gnu.org/"
+"gethelp/>\n"
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: érvénytelen művelet"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Hibás szignál"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Bontás"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Megszakítás"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Abbahagyás"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Érvénytelen utasítás"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "BPT trace/trap"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "ABORT utasítás"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "EMT utasítás"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Lebegőpontos kivétel"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Kilőve"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Buszhiba"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Szegmenshiba"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Rossz rendszerhívás"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Törött csővezeték"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Ébresztés"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Befejezve"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Sürgős IO körülmény"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Megállítva (szignál)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Folytatás"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Gyermek halála vagy megállítása"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Megállítva (konzolbemenet)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Megállítva (konzolkimenet)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "IO kész"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "CPU-korlátozás"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "Fájlkorlátozás"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Ébresztés (virtuális)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Ébresztés (profilozás)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Ablak változott"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Elveszett zárolás"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Felhasználói 1."
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Felhasználói 2."
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "HFT bemeneti adat vár"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "táphiba fenyeget"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "rendszerleállás fenyeget"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "folyamat átvitele másik CPU-ra"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "programozási hiba"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "HFT monitor mód megadva"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "HFT monitor mód visszavonva"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "HFT hangfolyamat befejezve"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "Információkérés"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "%d. számú ismeretlen szignál"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "hibás helyettesítés: nincs záró „%s� a következőben: %s"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: lista nem adható tömbelemnek értékül"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "nem hozható létre a csővezeték a folyamatbehelyettesítéshez"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "nem hozható létre a gyermek a folyamatbehelyettesítéshez"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "nem nyitható meg olvasásra a(z) %s csővezeték"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "nem nyitható meg írásra a(z) %s csővezeték"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "nem duplikálható a(z) %s csővezeték %d. fájlleíróként"
+
+#: subst.c:6213
+msgid "command substitution: ignored null byte in input"
+msgstr "parancshelyettesítés: figyelmen kívül hagyott null bájt a bemeneten"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "nem hozható létre csővezeték a parancsbehelyettesítéshez"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "nem hozható létre gyermek a parancsbehelyettesítéshez"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute: nem duplikálható a csővezeték 1. fájlleíróként"
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: érvénytelen változóérték a névhivatkozáshoz"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: az indirekt kiegészítés érvénytelen"
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr "%s: érvénytelen változónév"
+
+#: subst.c:7256
+#, c-format
+msgid "%s: parameter not set"
+msgstr "%s: a paraméter nincs beállítva"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: a paraméter null vagy nincs beállítva"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: részkarakterlánc-kifejezés < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: rossz helyettesítés"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: nem lehet így értéket adni"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+"a parancsértelmező későbbi verziói kötelezővé teszik majd az aritmetikai "
+"kiértékelést"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "hibás helyettesítés: nincs záró „`� a következőben: %s"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "nincs találat: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "argumentum szükséges"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: egész kifejezés szükséges"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "„)� szükséges"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "„)� szükséges %s helyett"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: kétoperandusú operátor szükséges"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: egyoperandusú operátor szükséges"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "hiányzó „]�"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "szintaktikai hiba: váratlan „;�"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "érvénytelen szignálszám"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr "elfogáskezelő: a legnagyobb elfogáskezelő-szint túllépve (%d)"
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: rossz érték a trap_list[%d]-ban: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps: szignálkezelő a SIG_DFL, %d (%s) újraküldése önmagunknak"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: rossz szignál: %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "hiba a függvénydefiníció betöltésekor: „%s�"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "a parancsértelmező szintje (%d) túl magas, visszaállítás 1-re"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: nincs függvénykörnyezet az aktuális látókörben"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: nem lehet a változóhoz értéket rendelni"
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr "%s: egész szám hozzárendelése a névhivatkozáshoz"
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: nincs függvénykörnyezet az aktuális látókörben"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s exportstr-je null"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "érvénytelen karakter (%d) %s exportstr-jében"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "nincs „=� %s exportstr-jében"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr "pop_var_context: shell_variables feje nem egy függvénykörnyezet"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: nincs global_variables környezet"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr "pop_scope: shell_variables feje nem egy átmeneti környezeti látókör"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: nem nyitható meg FILE-ként"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: érvénytelen érték a trace fájlleíróhoz"
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s: a kompatibilitási érték kívül esik a tartományon"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Copyright (C) 2018 Free Software Foundation, Inc."
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"A licenc GPLv3+: a GNU GPL 3. vagy újabb változata\n"
+"<http://gnu.org/licenses/gpl.html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, %s (%s) verzió\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr "Ez egy szabad szoftver, terjesztheti és/vagy módosíthatja."
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "NINCS GARANCIA, a törvény által engedélyezett mértékig."
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: nem lehetséges %lu byte foglalása (%lu byte lett foglalva)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: nem lehetséges %lu byte foglalása"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d nem lehetséges %lu byte foglalása (%lu byte lett foglalva)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d nem lehetséges %lu byte foglalása"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [név[=érték] ... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] név [név ...]"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpsvPSVX] [-m kiosztás] [-f fájlnév] [-q név] [-u név] [-r billkomb] "
+"[-x billkomb:shell-parancs] [billkomb:readline-függvény vagy readline-"
+"parancs]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [shell-builtin [arg ...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [kif]"
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]] [-@]] [ktár]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] parancs [arg ...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilnrtux] [-p] [név[=érték] ...]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilnrtux] [-p] név[=érték] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [kapcsoló] név[=érték] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [arg ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [arg ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f fájlnév] [név ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [arg ...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts opciók név [arg]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a név] [parancs [argumentumok ...]] [átirányítás ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr ""
+"fc [-e ename] [-lnr] [első] [utolsó] vagy fc -s [minta=csere] [parancs]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [munkaszám]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [munkaszám ...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p útvonal] [-dt] [név ...]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [minta ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d szám] [n] vagy history -anrw [fájlnév] vagy history -ps arg "
+"[arg...]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [munkaszám ...] vagy jobs -x parancs [args]"
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [munkaszám ... | pid ...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s szignál | -n szignálszám | -szignál] pid | munkaszám ... vagy kill -"
+"l [szignál]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let arg [arg ...]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a tömb] [-d elválasztó] [-i szöveg] [-n szám] [-N szám] [-p "
+"prompt] [-t időkeret] [-u fd] [név ...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [--abefhkmnptuvxBCHP] [-o beállításnév] [--] [arg ...]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [név ...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [név[=érték] ...] vagy export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [név[=érték] ...] vagy readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source fájlnév [argumentumok]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". fájlnév [argumentumok]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [kifejezés]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ arg... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[arg] szignál ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] név [név ...]"
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [korlát]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [mód]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-fn] [id ...]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [pid ...]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for NÉV [in SZAVAK ... ] ; do PARANCSOK; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( kif1; kif2; kif3 )); do PARANCSOK; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select NÉV [in SZAVAK ... ;] do PARANCSOK; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] csővezeték"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case SZÓ in [MINTA [| MINTA]...) PARANCSOK ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if PARANCSOK; then PARANCSOK; [ elif PARANCSOK; then PARANCSOK; ]... [ else "
+"PARANCSOK; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while PARANCSOK; do PARANCSOK; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until PARANCSOK; do PARANCSOK; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [NÉV] parancs [átirányítások]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function név { PARANCSOK ; } vagy név () { PARANCSOK ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ PARANCSOK ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "munkaszám [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( kifejezés ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ kifejezés ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "variables - Néhány parancsértelmező-változó neve és jelentése"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | ktár]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [optnév ...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v változó] formátum [argumentumok]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o beállítás] [-A művelet] [-G "
+"globminta] [-W szólista] [-F függvény] [-C parancs] [-X szűrőminta] [-P "
+"prefixum] [-S szuffixum] [név ...]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o beállítás] [-A művelet] [-G globminta] [-W "
+"szólista]  [-F függvény] [-C parancs] [-X szűrőminta] [-P prefixum] [-S "
+"szuffixum] [szó]"
+
+#: builtins.c:239
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o beállítás] [-DEI] [név ...]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-d elválasztó] [-n szám] [-O kezdet] [-s szám] [-t] [-u fd] [-C "
+"parancs] [-c távolság] [tömb]"
+
+#: builtins.c:244
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-d elválasztó] [-n szám] [-O kezdet] [-s szám] [-t] [-u fd] [-C "
+"parancs] [-c távolság] [tömb]"
+
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Aliasok definiálása vagy kiírása.\n"
+"    \n"
+"    Argumentumok nélkül az „alias� kiír egy újrahasználható listát a "
+"meglévő\n"
+"    aliasokról „alias NÉV=ÉRTÉK' formában a szabványos kimenetre.\n"
+"    \n"
+"    Különben egy NÉV nevű aliast definiál ÉRTÉK értékkel. Az ÉRTÉK végén a\n"
+"    záró szóköz lehetővé teszi a következő szó számára is az\n"
+"    aliashelyettesítést.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -p\tkiír minden aliast a fenti formában\n"
+"    \n"
+"    Kilépési kód:\n"
+"    igazzal tér vissza, kivéve ha nincs megadott NÉV nevű alias definiálva."
+
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Minden NÉV eltávolítása a definiált aliasok közül.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -a\tminden definíció törlése\n"
+"    \n"
+"    Sikeresen tér vissza, kivéve ha nincs megadott NÉV nevű alias."
+
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"Readline billentyűkötések és változók beállítása.\n"
+"    \n"
+"    Egy billentyűsorozat hozzárendelése Readline függvényhez vagy makróhoz,\n"
+"    vagy Readline változó beállítása. A beállítás nélküli szintaxis "
+"megegyezik\n"
+"    az ~/.inputrc-ben találhatóval, de kell legyen egy argumentuma:\n"
+"    pl. bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -m  kiosztás       A KIOSZT�S használata kiosztásként a parancs "
+"hatásának\n"
+"                         idejére. Elfogadható kiosztásnevek: emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-\n"
+"                         move, vi-command és vi-insert.\n"
+"      -l                 Nevek és függvények listázása.\n"
+"      -P                 Függvénynevek és kötések listázása.\n"
+"      -p                 Függvények és kötések listázása újrahasználható\n"
+"                         formában.\n"
+"      -S                 Makrókat végrehajtó billentyűkombinációk és "
+"értékeik\n"
+"                         listázása.\n"
+"      -s                 Makrókat végrehajtó billentyűkombinációk és "
+"értékeik\n"
+"                         listázása újrahasználható formában.\n"
+"      -V                 Változónevek és értékek listázása.\n"
+"      -v                 Változónevek és értékek listázása újrahasználható\n"
+"                         formában.\n"
+"      -q  függvénynév    A függvényhez tartozó billentyűkombináció "
+"lekérése.\n"
+"      -u  függvénynév    Össze adott függvényhez tartozó "
+"billentyűkombináció\n"
+"                         törlése.\n"
+"      -r  billkomb       A BILLKOMB-hoz tartozó kötések törlése.\n"
+"      -f  fájlnév        Kötések olvasása F�JLNÉV fájlból.\n"
+"      -x  billkomb:shell-parancs\tSHELL-PARANCS végrehajtása BILLKOMB-ra.\n"
+"      -X                 A -x használatával kötött billentyűkombinációk\n"
+"                         és a társított parancsok kiírása, bemenetként\n"
+"                         újrahasználható formában.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    a bind 0-val tér vissza, ha nincs ismeretlen kapcsoló vagy hiba."
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Kilépés a for, while vagy until ciklusokból.\n"
+"    \n"
+"    Kilépés egy FOR, WHILE vagy UNTIL ciklusból. Ha N meg van adva, akkor N\n"
+"    egymásba ágyazott ciklusból lép ki.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    A kilépési kód 0, ha N >= 1."
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"A for, while vagy until ciklus újrakezdése.\n"
+"    \n"
+"    A következő iterációtól folytatja a FOR, WHILE vagy UNTIL ciklust.\n"
+"    Ha N meg van adva, akkor N egymásba ágyazott ciklusból lép ki.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    A kilépési kód 0, ha N >= 1."
+
+#: builtins.c:354
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Beépített parancsok végrehajtása.\n"
+"    \n"
+"    Végrehajtja SHELL-BUILTIN-t ARG argumentumokkal parancskeresés nélkül.\n"
+"    Ez akkor hasznos, ha felül szeretne definiálni egy beépített parancsot\n"
+"    függvényként, de ebből meg szeretné hívni az eredeti parancsot.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Továbbadja a SHELL-BUILTIN kilépési kódját vagy hamissal tér vissza,\n"
+"    ha nincs ilyen parancs."
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Az aktuális szubrutinhívás környezetének visszaadása.\n"
+"    \n"
+"    KIF nélkül \"$sor $fájlnév\" formátumú eredményt ad. A KIF-fel pedig\n"
+"    \"$sor $szubrutin $fájlnév\" formátumút; ez hasznos lehet stack trace\n"
+"    kiírásához.\n"
+"    \n"
+"    Az EXPR értéke azt adja meg, hogy a jelenlegihez képest milyen mélyre\n"
+"    lépjen vissza; a verem tetején a 0-s keret van.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    0-val tér vissza, ha érvényes a KIF és valóban függvényt hajt végre a\n"
+"    parancsértelmező."
+
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"A parancsértelmező munkakönyvtárának váltása.\n"
+"    \n"
+"    A munkakönyvtár átváltása a KT�R-ra. Elhagyása esetén a HOME környezeti\n"
+"    változóban lévő könyvtárra vált.\n"
+"    \n"
+"    A CDPATH környezeti változó adja meg a KT�R keresési útvonalait. Az\n"
+"    útvonalakat kettőspont (:) választja el. Egy üres könyvtárnév az "
+"aktuális\n"
+"    könyvtárat jelenti. Ha a KT�R „/� jellel kezdődik, a CDPATH értéke\n"
+"    nincs figyelembe véve.\n"
+"    \n"
+"    Ha a könyvtár nem létezik, és a „cdable_vars� parancsértelmező-"
+"beállítás\n"
+"    aktív, a KT�R változónévként lesz használva. Ha a változónak van\n"
+"    értéke, az lesz KT�R-értékként használva.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -L\tszimbolikus linkek szigorú követése\n"
+"      -P\ta fizikai könyvtárfa használata a szimbolikus linkek követése\n"
+"       helyett: szimbolikus linkek feloldása a KT�R-ban a „..� \n"
+"    \t\telőfordulásainak feldolgozása előtt\n"
+"      -e\tha a -P kapcsoló meg van adva, és az aktuális munkakönyvtár\n"
+"    \t\tnem határozható meg sikeresen, kilépés nem nulla állapottal\n"
+"      -@\taz azt támogató rendszereken a kibővített attribútumokkal\n"
+"    \t\trendelkező fájlok megjelenítése a fájlattribútumokat tartalmazó\n"
+"    \t\tkönyvtárként\n"
+"    \n"
+"    Az alapértelmezett a szimbolikus linkek követése, mintha „-L� lenne\n"
+"    megadva.\n"
+"    A „..� feldolgozása a közvetlenül előtte lévő útvonalnév-összetevő\n"
+"    eltávolításával történik, visszamenve egy osztásjelig vagy a KT�R "
+"kezdetéig.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    0-val tér vissza, ha könyvtárat váltott és ha a -P használatakor a $PWD\n"
+"    sikeresen beállításra kerül; más értéket különben."
+
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"Az aktuális munkakönyvtár útvonalának kiírása.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -L\t$PWD értékének kiírása, ha az a munkakönyvtár érvényes neve\n"
+"      -P\ta fizikai könyvtár kiírása, szimbolikus linkek nélkül\n"
+"    \n"
+"    Az alapértelmezett a szimbolikus linkek követése, mintha „-L� lenne\n"
+"    megadva.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    0-val tér vissza, kivéve ha érvénytelen kapcsolót kapott vagy nem lehet\n"
+"    olvasni a munkakönyvtárat."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Nincs művelet.\n"
+"    \n"
+"    Nincs hatása, a parancs nem csinál semmit.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Mindig sikeres."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Sikeres visszatérés.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Mindig sikeres."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Sikertelen visszatérés.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Mindig sikertelen."
+
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Parancs végrehajtása vagy információk megjelenítése róla.\n"
+"    \n"
+"    Végrehajtja a PARANCS parancsot ARGUMENTUMOK argumentumokkal a\n"
+"    függvényfeloldás végrehajtása nélkül; vagy információt jelenít meg a\n"
+"    parancsról. Használható programok futtatására, ha azonos nevű függvény\n"
+"    létezik.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -p       alapértelmezett érték használata PATH helyett, amely\n"
+"               garantáltan megtalál minden szabványos eszközt\n"
+"      -v       egy leírást ad a PARANCS parancsról a „type� beépített\n"
+"               parancshoz hasonló módon\n"
+"      -V       részletesebb leírást ad minden PARANCSRÓL\n"
+"    \n"
+"    Kilépési kód:\n"
+"    A PARANCS kilépési kódjával tér vissza, vagy hibát jelez, ha nem\n"
+"    található a PARANCS."
+
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"Változóértékek és attribútumok beállítása.\n"
+"    \n"
+"    Változók deklarálása és attribútumok megadása. Ha nincs NÉV megadva,\n"
+"    kiírja az összes változó attribútumait és értékét.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -f\tművelet és megjelenítés korlátozása függvénynevekre és\n"
+"      \t\t-definíciókra\n"
+"      -F\tmegjelenítés korlátozása függvénynevekre (és sor számára,\n"
+"      \t\tvalamint a forrásfájl nevére hibakereséskor)\n"
+"      -g\tglobális változók létrehozása parancsértelmező-függvényben való\n"
+"      \t\thasználatkor, egyébként figyelmen kívül marad\n"
+"      -p\tminden NÉV attribútumainak és értékének kiírása\n"
+"    \n"
+"    Attribútumokat állító kapcsolók:\n"
+"      -a\tNÉV indexelt tömbbé alakítása (ha támogatott)\n"
+"      -A\tNÉV asszociatív tömbbé alakítása (ha támogatott)\n"
+"      -i\tminden NÉV kapjon „integer� attribútumot\n"
+"      -l\tminden NÉV értékének kisbetűssé konvertálása értékadáskor\n"
+"      -n\ta NÉV hivatkozás legyen az értékében megadott változóra\n"
+"      -r\tminden NÉV legyen csak olvasható\n"
+"      -t\tminden NÉV kapjon „trace� attribútumot\n"
+"      -u\tminden NÉV értékének nagybetűssé konvertálása értékadáskor\n"
+"      -x\tminden NÉV exportálása\n"
+"    \n"
+"    A „-� helyett „+� használata kikapcsolja az adott attribútumot.\n"
+"    \n"
+"    Az integer attribútummal rendelkező változókhoz való értékadáskor\n"
+"    aritmetikai kiértékelés történik (lásd a „let� parancsot).\n"
+"    \n"
+"    Függvénytörzsben „declare�-t használva minden NÉV helyi lesz, hasonlóan\n"
+"    a „local� parancshoz. A „-g� kapcsoló elnyomja ezt a viselkedést.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, kivéve ha érvénytelen kapcsolót kap, vagy "
+"értékadási\n"
+"    hiba történik."
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"Változóértékek és attribútumok beállítása.\n"
+"    \n"
+"    A „declare� szinonimája. Lásd: „help declare�."
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Helyi változók definiálása.\n"
+"    \n"
+"    Egy NÉV nevű helyi változót hoz létre, és ÉRTÉK értéket ad neki.\n"
+"    A KAPCSOLÓ tetszőleges, a „declare� által elfogadott kapcsoló lehet.\n"
+"    \n"
+"    A helyi változók csak a függvényen belül használhatóak, nem láthatóak\n"
+"    az őket definiáló függvényen és annak gyermekein kívül.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, kivéve ha érvénytelen kapcsolót kap, értékadási\n"
+"    hiba történik, vagy nem függvényben lett hívva."
+
+#: builtins.c:557
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Argumentumok szabványos kimenetre írása.\n"
+"    \n"
+"    Argumentumok és egy újsor kiírása a szabványos kimenetre.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -n\tne fűzzön hozzá újsort\n"
+"      -e\taz alábbi escape-szekvenciák értelmezése\n"
+"      -E\tescape-szekvenciák értelmezésének tiltása\n"
+"    \n"
+"    Az „echo�a következő visszaper-escape-karaktereket értelmezi:\n"
+"      \\a\tterminálcsengő\n"
+"      \\b\tvisszatörlés (backspace)\n"
+"      \\c\ttovábbi kimenet elnyelése\n"
+"      \\e\tescape-karakter\n"
+"      \\E\tescape-karakter\n"
+"      \\f\tlapdobás-karakter\n"
+"      \\n\tújsor-karakter\n"
+"      \\r\tkocsivissza-karakter\n"
+"      \\t\tvízszintes tabulátor\n"
+"      \\v\tfüggőleges tabulátor\n"
+"      \\\\\tvisszaper (\\)\n"
+"      \\0nnn\taz oktális NNN ASCII-kódú karakter. NNN 0–3\n"
+"    \t\toktális számjegy lehet\n"
+"      \\xHH\taz a 8 bites karakter, amelynek értéke HH\n"
+"    \t\t(hexadecimálisan). HH egy vagy két hexaszámjegy lehet\n"
+"      \\uHHHH\ta Unicode karakter, amely értéke a HHHH hexadecimális\n"
+"    \t\térték. A HHHH 1-4 hexaszámjegy lehet.\n"
+"      \\UHHHHHHHH a Unicode karakter, amely értéke a HHHHHHHH hexadecimális\n"
+"    \t\térték. A HHHHHHHH 1-8 hexaszámjegy lehet.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, kivéve írási hiba esetén."
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Argumentumok szabványos kimenetre írása.\n"
+"    \n"
+"    Argumentumok és egy újsor kiírása a szabványos kimenetre.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -n\tne fűzzön hozzá újsort\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, kivéve írási hiba esetén."
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"Parancsértelmező beépített parancsainak engedélyezése és tiltása.\n"
+"    \n"
+"    Beépített parancsokat engedélyez és tilt. Egy parancs letiltásával az\n"
+"    elérési út beírása nélkül lehet beépített paranccsal megegyező nevű\n"
+"    programot futtatni.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -a\ta beépített parancsok és azok állapotának listázása\n"
+"      -n\tminden NÉV tiltása vagy a tiltott parancsok listázása\n"
+"      -p\ta beépített parancsokat listázza újrahasználható formában\n"
+"      -s\tcsak a Posix „special� beépített parancsokat listázza\n"
+"    \n"
+"    Dinamikus betöltést szabályozó kapcsolók:\n"
+"      -f\tNÉV nevű beépített parancs betöltése a F�JLNÉV megosztott\n"
+"      \t\tobjektumfájlból\n"
+"      -d\tegy -f kapcsolóval betöltött parancs eltávolítása\n"
+"    \n"
+"    Kapcsolók nélkül minden NÉV engedélyezésre kerül\n"
+"    \n"
+"    A beépített parancs helyett a $PATH-ban található „test� használatához\n"
+"    használja az „enable -n test� parancsot.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, kivéve ha a NÉV nem egy beépített parancs, vagy\n"
+"    hiba történt."
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Argumentumok végrehajtása parancsként.\n"
+"    \n"
+"    Az argumentumokat összefűzi, és az eredményt egy parancssorként hajtja\n"
+"    végre a parancsértelmező.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    A parancs kilépési kódjával tér vissza, vagy sikerrel, ha üres a parancs."
+
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"Kapcsolók értelmezése.\n"
+"    \n"
+"    A getopts parancsot arra használják az eljárások, hogy pozicionális\n"
+"    paramétereket kapcsolókként értelmezzenek.\n"
+"    \n"
+"    A KAPCSOLÓK azokat a betűket tartalmazza, amelyeket fel kell ismerni.\n"
+"    Ha egy kapcsolót kettőspont követ, a kapcsoló kötelező paramétert vár.\n"
+"    Ezt a paramétert szóközzel kell elválasztani a kapcsolótól.\n"
+"    \n"
+"    Minden végrehajtáskor a getopts a $név változóba helyezi a következő\n"
+"    kapcsolót (szükség esetén inicializálva a változót). A kapcsoló indexe\n"
+"    az OPTIND változóba kerül. Az OPTIND változót a parancsértelmező "
+"induláskor\n"
+"    1-re inicializálja. Ha a kapcsolónak paramétere van, ennek értéke\n"
+"    az OPTARG változóba kerül.\n"
+"    \n"
+"    A getopts két módon tud hibát jelezni. Elnémítható a hibajelzés az "
+"OPCIÓK\n"
+"    kettősponttal való kezdésével. Ebben a módban nem kerül kiírásra\n"
+"    hibaüzenet. Ha a getopts érvénytelen opciót talál, ezt az OPTARG\n"
+"    változóba írja. Ha hiányzik egy kötelező paraméter, a $név változóba "
+"egy\n"
+"    kettőspont kerül, és a talált karakter az OPTARG-ba kerül.\n"
+"    Ha a getopts nincs néma módban, és érvénytelen kapcsolót talál, $NÉV-be\n"
+"    egy kérdőjel kerül, az OPTARG törlésre kerül, és hibaüzenetet ír ki.\n"
+"    \n"
+"    Ha az OPTERR változó 0-ra van állítva, a getopts letiltja a "
+"hibaüzenetet,\n"
+"    akkor is, ha nem kettősponttal kezdődik az OPCIÓK. Az OPTERR alapértéke "
+"1.\n"
+"    \n"
+"    A getopts alapvetően a pozicionális paramétereket értelmezi ($0–$9), de\n"
+"    több argumentum esetén mindet kezeli.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, ha kapcsolót talált, sikertelenül, ha elfogytak a\n"
+"    kapcsolók, vagy hiba történt."
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"A parancsértelmező felváltása a megadott paranccsal.\n"
+"    \n"
+"    A PARANCS végrehajtása, kicserélve a parancsértelmezőt a megadott\n"
+"    programmal. Az ARGUMENTUMOK lesznek a PARANCS argumentumai. Ha nincs\n"
+"    PARANCS megadva, a futó parancsértelmezőben kerülnek érvényesítésre\n"
+"    az átirányítások.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -a név\ta NÉV átadása a PARANCSNAK $0-ként\n"
+"      -c\ta PARANCS végrehajtása üres környezettel\n"
+"      -l\ta PARANCSNAK egy „-� átadása $0-ként\n"
+"    \n"
+"    Ha a parancs nem hajtható végre, a nem interaktív parancsértelmező "
+"kilép,\n"
+"    kivéve, ha az „execfail� parancsértelmező-beállítás él.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, kivéve, ha a PARANCS nem található vagy sikertelen\n"
+"    az átirányítás."
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Kilépés a parancsértelmezőből.\n"
+"    \n"
+"    Kilép a parancsértelmezőből N kilépési kóddal. Ha az N hiányzik, az "
+"utolsó\n"
+"    parancs kilépési kódjával lép ki."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Kilépés a bejelentkező parancsértelmezőből.\n"
+"    \n"
+"    Kilép a bejelentkező parancsértelmezőből az N kilépési kóddal. Hibával\n"
+"    tér vissza, ha nem bejelentkező parancsértelmezőből hívják."
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"Parancsok megjelenítése vagy végrehajtása az előzményből.\n"
+"    \n"
+"    Az fc segítségével lehet korábbi parancsokat kiírni, módosítani és "
+"újból\n"
+"    végrehajtani.\n"
+"    Az ELS� és UTOLSÓ lehetnek egy tartományt meghatározó számok, vagy az "
+"ELS�\n"
+"    lehet egy karakterlánc, amely az utolsó így kezdődő parancsot jelöli.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -e ENAME\tszerkesztő kiválasztása. Az alapértelmezett az FCEDIT,\n"
+"      \t\tmajd EDITOR, végül a vi\n"
+"      -l\tszerkesztés helyett a sorok listázása\n"
+"      -n\tsorok számának elhagyása listázáskor\n"
+"      -r\tsorrend megcserélése (legújabbakkal kezdi a listázást)\n"
+"    \n"
+"    Az „fc -s [minta=csere] [parancs]� formával PARANCS... újból "
+"végrehajtásra\n"
+"    kerül, miután a régi=új behelyettesítés megtörtént.\n"
+"    \n"
+"    Hasznos lehet az „alias r='fc -s'� használata, mivel így pl. az „r cc�\n"
+"    parancs végrehajtja az utolsó „cc�-vel kezdődő parancsot, míg „r� meg-\n"
+"    ismétli az utolsó parancsot.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikert vagy a végrehajtott parancs kilépési kódját adja; nullától "
+"eltérőt\n"
+"    hiba esetén."
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Munka előtérbe hozása.\n"
+"    \n"
+"    A MUNKASZ�M által meghatározott munkát az előtérbe hozza, az aktuális\n"
+"    munkává téve azt. Ha nincs MUNKASZ�M, a parancsértelmező által "
+"megjegyzett\n"
+"    aktuális munkára vonatkozik a parancs.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Az előtérbe hozott parancs állapota (annak kilépésekor), vagy nem nulla\n"
+"    hiba esetén."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Munka háttérbe küldése.\n"
+"    \n"
+"    A MUNKASZ�M által meghatározott munkákat háttérbe küldi, mintha „&�\n"
+"    jellel a parancs végén lettek volna indítva. Ha nincs MUNKASZ�M, a\n"
+"    parancsértelmező által megjegyzett aktuális munkára vonatkozik a "
+"parancs.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, kivéve ha a munkakezelés le van tiltva, vagy\n"
+"    hiba történt."
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"Programok helyének megjegyzése vagy megjelenítése.\n"
+"    \n"
+"    Meghatározza és megjegyzi minden megadott NÉV parancs teljes útvonalát.\n"
+"    Ha nincs NÉV megadva, az összes megjegyzett parancsot listázza.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -d\tminden megjegyzett NÉV helyének elfelejtése\n"
+"      -l\tbemenetként újrahasználható formátumban listázzon\n"
+"      -p útvonal\taz ÚTVONAL használata a NÉV teljes útvonalaként\n"
+"      -r\tminden megjegyzett hely elfelejtése\n"
+"      -t\tminden megadott NÉV megjegyzett helyének kiírása,\n"
+"      \t\ttöbb név esetén a helyek előtt a NÉV kiírása\n"
+"    Argumentumok:\n"
+"      NÉV\tMinden NÉV megkeresése a $PATH-ban, és hozzáadása a\n"
+"    \t\tmegjegyzettek listájához.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, kivéve, ha a NÉV nem található vagy érvénytelen\n"
+"    kapcsolót kap."
+
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Tájékoztatás megjelenítése beépített parancsokról.\n"
+"    \n"
+"    Rövid leírásokat jelenít meg a beépített parancsokról. Ha MINTA meg\n"
+"    van adva, részletes segítséget ad az összes illeszkedő parancsról,\n"
+"    különben a témákat listázza.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -d\tminden témáról rövid leírás listázása\n"
+"      -m\tman-szerű formátum használata\n"
+"      -s\tcsak rövid használati útmutató kiírása minden, a MINT�NAK\n"
+"    \t\tmegfelelő témáról\n"
+"    \n"
+"    Argumentumok:\n"
+"      MINTA\tTémakört meghatározó minta\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, kivéve ha nincs találat vagy hibás kapcsolót kap."
+
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Az előzmények megjelenítése vagy módosítása.\n"
+"    \n"
+"    Megjeleníti az előzménylistát sorszámokkal, minden módosított "
+"bejegyzést\n"
+"    az elején „*�-gal megjelölve. N megadása esetén az utolsó N\n"
+"    bejegyzést listázza.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -c\taz előzménylista törlése az összes bejegyzésének törlésével\n"
+"      -d eltolás\taz ELTOL�S pozícióban lévő előzménybejegyzés törlése,\n"
+"    \t\ta negatív eltolások az előzménylista végétől számolnak vissza\n"
+"      -a\ta munkamenet előzménysorainak hozzáfűzése az előzményfájlhoz\n"
+"      -n\tminden olyan előzménysor beolvasása, amelyek még nem lettek\n"
+"    \t\tbeolvasva az előzményfájlból, és azok hozzáfűzése az\n"
+"    \t\telőzménylistához\n"
+"      -r\telőzményfájl beolvasása, és a tartalom hozzáfűzése az\n"
+"    \t\telőzménylistához\n"
+"      -w\taz aktuális előzmények előzményfájlba írása\n"
+"    \n"
+"      -p\telőzménykiegészítés végrehajtása minden ARGUMENTUMON, és az\n"
+"      \t\teredmény megjelenítése előzménylistán való tárolás nélkül\n"
+"      -s\tARGUMENTUMOK hozzáfűzése egyetlen bejegyzésként a listához\n"
+"    \n"
+"    Ha F�JLNÉV is meg van adva, az lesz előzményfájlként használva. "
+"Különben\n"
+"    a HISTFILE értéke, vagy ennek híján ~/.bash_history.\n"
+"    \n"
+"    Ha a HISTTIMEFORMAT változó be van állítva, és nem üres, akkor értéke\n"
+"    lesz használva az strftime(3) formátumparamétereként a kijelzett\n"
+"    bejegyzések időbélyegeinek megjelenítéséhez. Különben nem ír ki időt.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, kivéve ha érvénytelen kapcsolót kap, vagy hiba\n"
+"    történik."
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"Munkák állapotának megjelenítése.\n"
+"    \n"
+"    Listáz minden aktív munkát. MUNKASZ�M megadása esetén csak az adott\n"
+"    munka jelenik meg, különben az összes aktív.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -l\tfolyamatazonosítók megjelenítése a többi adaton túl\n"
+"      -n\tcsak azon folyamatok listázása, amelyek állapota változott\n"
+"    \t\taz utolsó értesítés óta\n"
+"      -p\tcsak folyamatazonosítók listázása\n"
+"      -r\tcsak a futó munkák megjelenítése\n"
+"      -s\tcsak a megállított munkák megjelenítése\n"
+"    \n"
+"    Ha -x meg van adva, PARANCS kerül futtatásra úgy, hogy minden "
+"argumentum\n"
+"    a meghatározott munkához tartozó folyamatcsoport vezetőjének PID-jére\n"
+"    cserélődik.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, ha nem kap érvénytelen kapcsolót, és nem történik\n"
+"    hiba. -x használata esetén a PARANCS kilépési kódjával tér vissza."
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"Munkák eltávolítása az aktuális parancsértelmezőből.\n"
+"    \n"
+"    Eltávolít minden MUNKASZ�M munkát az aktív munkák táblájából. A "
+"MUNKASZ�M\n"
+"    megadása nélkül a parancsértelmező által megjegyzett aktuális\n"
+"    munkát távolítja el.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -a\tminden munka eltávolítása, ha nincs MUNKASZ�M megadva\n"
+"      -h\tminden MUNKASZ�M megjelölése úgy, hogy nem kell továbbadni\n"
+"      \t\tnekik a parancsértelmező által kapott SIGHUP-ot\n"
+"      -r\tcsak futó munkák eltávolítása\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, ha nem kap érvénytelen kapcsolót vagy MUNKASZ�MOT"
+
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Szignál küldése munkának.\n"
+"    \n"
+"    PID vagy MUNKASZ�M által meghatározott folyamatoknak a SZIGN�L vagy\n"
+"    SZIGN�LSZ�M szignál küldése. Ha sem a SZIGN�L, sem a SZIGN�LSZ�M nincs\n"
+"    megadva, akkor a SIGTERM az alapértelmezés.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -s sig\ta SIG egy szignálnév\n"
+"      -n sig\ta SIG egy szignálszám\n"
+"      -l\ta szignálnevek listázása; ha argumentumok követik a -l kapcsolót,\n"
+"    \t\takkor azok szignálszámoknak lesznek tekintve ahhoz, hogy mely\n"
+"    \t\tneveket kell listázni\n"
+"      -L\ta -l szinonimája\n"
+"    \n"
+"    A kill két okból beépített parancs: így lehetővé teszi munkaazonosítók\n"
+"    használatát folyamatazonosítók helyett, továbbá lehetségessé válik a\n"
+"    folyamatok kilövése, ha a folyamatok számának korlátja elérve.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, ha nem kap érvénytelen kapcsolót, vagy nem "
+"történik\n"
+"    hiba."
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"Aritmetikai kifejezés kiértékelése.\n"
+"    \n"
+"    Minden ARGUMENTUM kiértékelése aritmetikai kifejezésként. A kiértékelés\n"
+"    fix szélességű egészek esetén túlcsordulás-ellenőrzés nélkül történik,\n"
+"    de a nullával való osztás hibát okoz. Az alábbi operátorok soronként\n"
+"    azonos precedenciaszinten vannak. A precedencia az alábbi sorrendben\n"
+"    csökken:\n"
+"    \n"
+"    \tid++, id--\tváltozó postfix-növelése, -csökkentése\n"
+"    \t++id, --id\tváltozó prefix-növelése, -csökkentése\n"
+"    \t-, +\t\tmínusz, plusz előjel\n"
+"    \t!, ~\t\tlogikai és bitenkénti negált\n"
+"    \t**\t\thatványozás\n"
+"    \t*, /, %\t\tszorzás, osztás, maradék\n"
+"    \t+, -\t\tösszeadás, kivonás\n"
+"    \t<<, >>\t\tbitenkénti eltolás balra, jobb\n"
+"    \t<=, >=, <, >\tösszehasonlítás\n"
+"    \t==, !=\t\tegyenlőség, egyenlőtlenség\n"
+"    \t&\t\tbitenkénti ÉS\n"
+"    \t^\t\tbitenkénti kizáró vagy (XOR)\n"
+"    \t|\t\tbitenkénti VAGY\n"
+"    \t&&\t\tlogikai ÉS\n"
+"    \t||\t\tlogikai VAGY\n"
+"    \tkif ? kif : kif\n"
+"    \t\t\tfeltételes operátor\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=      értékadás\n"
+"    \n"
+"    Parancsértelmező-változók is lehetnek operandusok. A változók nevének\n"
+"    helyére értékük kerül (fix szélességű egészként) a kifejezésben. Nem\n"
+"    kell a változók „integer� jellemzőjét beállítani a használathoz.\n"
+"    \n"
+"    Az operátorok a fenti precedencia szerint hajtódnak végre. A zárójeles\n"
+"    kifejezések precedenciája a legmagasabb – ez felülírja a szabályokat.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Ha az utolsó argumentum 0, a let 1-gyel tér vissza, különben 0-val."
+
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"Egy sor beolvasása a szabványos bemenetről, és mezőkre osztása.\n"
+"    \n"
+"    Egy sor beolvasása a szabványos bemenetről, vagy az FD fájlleíróból, ha\n"
+"    meg van adva a -u kapcsoló. A sor mezőkre lesz osztva a szódarabolás\n"
+"    szabályai szerint. Az első szó az első NÉV nevű változó értéke lesz, a\n"
+"    második a másodiké stb. A szóelválasztó karaktereket az $IFS adja meg.\n"
+"    \n"
+"    Ha nincs NÉV megadva, a beolvasott sor a REPLY változóba kerül.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -a tömb\ta beolvasott szavak TÖMB tömb 0-tól kezdve egymást követő\n"
+"    \t\tindexű elemeibe kerülnek\n"
+"      -d elválasztó\taz ELV�LASZTÓ első karakteréig olvasson az újsor\n"
+"    \t\thelyett\n"
+"      -e\ta Readline használata a sor megszerzéséhez\n"
+"      -i szöveg\ta SZÖVEG használata kezdeti szövegként (Readline-hoz)\n"
+"      -n szám\tSZ�M karakter beolvasása után térjen vissza, ne várjon\n"
+"    \t\tújsorra, de vegye figyelembe az elválasztót, ha kevesebb\n"
+"    \t\tmint SZ�M karaktert olvasott be az elválasztóig\n"
+"      -N szám\tpontosan akkor térjen vissza, ha SZ�M karaktert olvasott\n"
+"    \t\tbe, kivéve az EOF elérését és az időtúllépést, az\n"
+"    \t\telválasztókat figyelmen kívül hagyva\n"
+"      -p prompt\tírja ki a PROMPT értékét olvasás előtt a sor elejére,\n"
+"    \t\tzáró újsor nélkül\n"
+"      -r\ttiltsa le a „\\� kezdetű escape-ek használatát\n"
+"      -s\tterminálról érkező bemenet ne visszhangozzon\n"
+"      -t idő\tID� leteltével jelezzen hibát, ha nem tudott egy teljes\n"
+"    \t\tsort beolvasni. A $TMOUT változó értéke az alapértelmezett\n"
+"    \t\tidőkorlát. Az ID� lehet tizedestört is. Ha idő 0, csak akkor\n"
+"    \t\tlesz sikeres a beolvasás, ha az adott fájlleírón már\n"
+"    \t\tolvasható a bemenet. Időtúllépés esetén a kilépési kód >128\n"
+"      -u fd\tfájl beolvasása az FD. fájlleíróból a szabványos bemenet\n"
+"    \t\thelyett\n"
+"    \n"
+"    Kilépési kód:\n"
+"    A kilépési kód nulla, kivéve ha EOF-ot ér a beolvasás, időtúllépéskor\n"
+"    (ekkor > 128) vagy érvénytelen fájlleíró megadásakor a -u kapcsolónak."
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"Visszatér egy függvényből.\n"
+"    \n"
+"    Egy függvény vagy egy „source�-olt parancsfájl adott N kilépési kóddal\n"
+"    való visszatérését okozza. Ha N nincs megadva, az utolsó parancs "
+"kilépési\n"
+"    kódjával tér vissza.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    N-nel tér vissza, kivéve ha nem függvényből vagy parancsfájlból akar\n"
+"    visszatérni – ekkor sikertelenséget jelez."
+
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"Parancsértelmező-beállítások és pozicionális paraméterek állítása, törlése.\n"
+"    \n"
+"    Parancsértelmező-attribútumok és pozicionális paraméterek értékeinek\n"
+"    módosítása, parancsértelmező-változók neveinek és értékeinek kiírása.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -a  A módosított vagy létrehozott változó exportálásra jelölése\n"
+"      -b  Munka befejezéséről azonnali értesítés\n"
+"      -e  Azonnali kilépés, ha egy parancs nem nullával lép ki\n"
+"      -f  Fájlnév-generálás (globbing) tiltása\n"
+"      -h  Parancsok helyének megjegyzése használatkor\n"
+"      -k  Minden értékadó argumentum a parancs környezetébe kerül, nem\n"
+"          csak a parancsot megelőzők\n"
+"      -m  Munkakezelés engedélyezése\n"
+"      -n  Parancsok beolvasása végrehajtás nélkül\n"
+"      -o kapcsolónév\n"
+"          Kapcsolónév szerinti változóállítás:\n"
+"              allexport    mint -a\n"
+"              braceexpand  mint -B\n"
+"              emacs        emacs-szerű sorszerkesztés\n"
+"              errexit      mint -e\n"
+"              errtrace     mint -E\n"
+"              functrace    mint -T\n"
+"              hashall      mint -h\n"
+"              histexpand   mint -H\n"
+"              history      előzmények tárolásának engedélyezése\n"
+"              ignoreeof    EOF esetén nem lép ki a parancsértelmező\n"
+"              interactive-comments\n"
+"                           interaktív parancsokban is lehetnek megjegyzések\n"
+"              keyword      mint -k\n"
+"              monitor      mint -m\n"
+"              noclobber    mint -C\n"
+"              noexec       mint -n\n"
+"              noglob       mint -f\n"
+"              nolog        jelenleg elfogadott, de mellőzött\n"
+"              notify       mint -b\n"
+"              nounset      mint -u\n"
+"              onecmd       mint -t\n"
+"              physical     mint -P\n"
+"              pipefail     egy csővezeték-parancs kilépési kódja az utolsó\n"
+"                           nem nullával kilépett parancs kilépési kódja,\n"
+"                           vagy 0, ha nem volt ilyen\n"
+"              posix        a bash viselkedésének megváltoztatása, ha az\n"
+"                           alapértelmezett nem felel meg a Posix\n"
+"                           szabványnak\n"
+"              privileged   mint -p\n"
+"              verbose      mint -v\n"
+"              vi           vi-szerű sorszerkesztés\n"
+"              xtrace       mint -x\n"
+"      -p  Mindig be van kapcsolva, ha a valós és effektív felhasználó nem\n"
+"          egyezik. Letiltja az $ENV fájl értelmezését és a "
+"parancsértelmező-\n"
+"          függvények betöltését. A kapcsoló kikapcsolása az effektív\n"
+"          uid és gid valósra állítását okozza\n"
+"      -t  Egyetlen parancs beolvasása és végrehajtás után kilépés\n"
+"      -u  Nem létező változók behelyettesítése legyen hiba\n"
+"      -v  Beolvasott parancsok kiírása olvasáskor (értelmezés előtt).\n"
+"      -x  Parancsok kiírása végrehajtáskor (értelmezés után).\n"
+"      -B  Szögleteszárójel-kiegészítés végrehajtása\n"
+"      -C  Létező normál fájlok felülírásának tiltása kimenetátirányításnál\n"
+"      -E  Az ERR csapdát öröklik a függvények\n"
+"      -H  Felkiáltójeles előzményhelyettesítés engedélyezése. Interaktív\n"
+"          parancsértelmezőnél alapértelmezés\n"
+"      -P  Parancsok végrehajtásánál szimbolikus linkek követésének tiltása\n"
+"          (például cd esetében)\n"
+"      -T  A DEBUG és RETURN csapdát öröklik a függvények\n"
+"      --  A további argumentumok hozzárendelése a pozicionális "
+"paraméterekhez.\n"
+"          Ha nincsenek további argumentumok, akkora a pozicionális "
+"paraméterek\n"
+"          törlésre kerülnek.\n"
+"      -   A további argumentumok pozicionális paraméterekhez rendelése\n"
+"          A -x és -v kapcsolók ki vannak kapcsolva.\n"
+"    \n"
+"    „-� helyett „+� használatával a kapcsolók tilthatóak. A kapcsolók a\n"
+"    parancsértelmező indításakor is állíthatóak. Az érvényben lévő "
+"kapcsolók\n"
+"    a $- változóban vannak. A záró nem értelmezhető argumentumok "
+"pozicionális\n"
+"    paraméterek lesznek (rendre $1, $2 ... $n). Ha nincs ARG, minden\n"
+"    parancsértelmező-változó kiírásra kerül.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, kivéve ha érvénytelen kapcsolót kap."
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"Parancsértelmező-változók és -függvények értékeinek és jellemzőinek "
+"törlése.\n"
+"    \n"
+"    Minden NÉV nevű függvény vagy változó törlése.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -f\tminden NÉV függvény\n"
+"      -v\tminden NÉV változó\n"
+"      -n\tminden NÉV névhivatkozás, és a változó törlése az általa\n"
+"    \t\thivatkozott változó helyett\n"
+"    \n"
+"    Kapcsolók nélkül az unset először változót, sikertelenség esetén "
+"függvényt\n"
+"    próbál törölni.\n"
+"    \n"
+"    Néhány változót nem lehet törölni, lásd „readonly�.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, kivéve ha hibás kapcsolót kap, vagy egy NÉV csak\n"
+"    olvasható."
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Parancsértelmező-változók exportálás attribútumának beállítása.\n"
+"    \n"
+"    Minden NÉV automatikus környezeti változóvá exportálásra jelölése. �gy\n"
+"    minden ezután kiadott parancs környezetében megjelenik. Ha az ÉRTÉK is\n"
+"    meg van adva, értékadás is történik.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -f\tparancsértelmező-függvényekre vonatkozzon\n"
+"      -n\texport attribútum eltávolítása minden NÉVR�L\n"
+"      -p\tösszes exportált változó és függvény listázása\n"
+"    \n"
+"    Egy „--� argumentum letiltja a további kapcsolóértelmezést.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, kivéve ha érvénytelen kapcsolót vagy NEVET kap."
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Parancsértelmező-változó változtathatatlannak jelölése.\n"
+"    \n"
+"    Minden NÉV csak olvashatóvá állítása. A továbbiakban a NEVEK értéke\n"
+"    értékadással nem változtatható. Ha ÉRTÉK is van megadva, az írásvédelem\n"
+"    bekapcsolása előtt értékadás is történik.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -a\tindexelt tömbváltozókra vonatkozik\n"
+"      -A\tasszociatív tömbváltozókra vonatkozik\n"
+"      -f\tfüggvényekre vonatkozik\n"
+"      -p\taz összes csak olvasható változó vagy függvény listázása\n"
+"      \t\taz -f kapcsoló megadásától függően\n"
+"    \n"
+"    Egy „--� argumentum letiltja a további kapcsolóértelmezést.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, kivéve ha érvénytelen kapcsolót vagy NEVET kap."
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"Pozicionális paraméterek eltolása.\n"
+"    \n"
+"    Az $N+1, $N+2... pozicionális paraméterek átnevezése $1, $2... névre.\n"
+"    Ha nincs N megadva, értéke 1 lesz.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, kivéve ha N negatív vagy nagyobb mint $#."
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Parancsok végrehajtása fájlból a futó parancsértelmezőben.\n"
+"    \n"
+"    A F�JLNÉV fájlból a parancsok beolvasása és végrehajtása. A fájlnév\n"
+"    megtalálásához a $PATH által felsorolt könyvtárakban keres. Az "
+"ARGUMENTUMOK\n"
+"    pozicionális paraméterek lesznek a F�JLNÉV végrehajtásakor.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    A F�JLNÉV utolsó parancsának kilépési kódjával tér vissza; "
+"sikertelenül,\n"
+"    ha a F�JLNÉV nem olvasható."
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Parancsvégrehajtás felfüggesztése.\n"
+"    \n"
+"    A futó parancsértelmező végrehajtásának felfüggesztése SIGCONT szignál\n"
+"    érkezéséig. Ha nincs erőltetve, bejelentkezési parancsértelmező nem\n"
+"    függeszthető fel.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -f\tfelfüggesztés erőltetése bejelentkezési parancsértelmezőn is\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, kivéve ha a munkakezelés nem támogatott vagy hiba\n"
+"    történt."
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"Feltételes kifejezések kiértékelése.\n"
+"    \n"
+"    0-val (igaz) vagy 1-gyel (hamis) lép ki a KIFEJEZÉS értékétől függően.\n"
+"    A kifejezéseknek egy vagy két operandusa lehet. Az egyoperandusú "
+"kifejezések\n"
+"    többnyire fájlok állapotát vizsgálják. Karakterláncokat és\n"
+"    számokat is lehet összehasonlítani.\n"
+"    \n"
+"    Fájloperátorok:\n"
+"    \n"
+"      -a F�JL        Igaz, ha a fájl létezik.\n"
+"      -b F�JL        Igaz, ha a fájl blokkeszköz.\n"
+"      -c F�JL        Igaz, ha a fájl karakteres eszköz.\n"
+"      -d F�JL        Igaz, ha a fájl könyvtár.\n"
+"      -e F�JL        Igaz, ha a fájl létezik.\n"
+"      -f F�JL        Igaz, ha a fájl létezik és normál fájl.\n"
+"      -g F�JL        Igaz, ha a fájl SETGID jogosultságú.\n"
+"      -h F�JL        Igaz, ha a fájl szimbolikus link.\n"
+"      -L F�JL        Igaz, ha a fájl szimbolikus link.\n"
+"      -k F�JL        Igaz, ha a fájlnak „sticky� bitje (t-bitje) van.\n"
+"      -p F�JL        Igaz, ha a fájl egy elnevezett csővezeték.\n"
+"      -r F�JL        Igaz, ha a fájl olvasható a felhasználó számára.\n"
+"      -s F�JL        Igaz, ha a fájl létezik és nem üres.\n"
+"      -S F�JL        Igaz, ha a fájl egy foglalat (socket).\n"
+"      -t FD          Igaz, ha a fájlleíró egy terminál.\n"
+"      -u F�JL        Igaz, ha a fájl SETUID jogosultságú.\n"
+"      -w F�JL        Igaz, ha a fájl írható a felhasználó számára.\n"
+"      -x F�JL        Igaz, ha a fájl végrehajtható a felhasználó számára.\n"
+"      -O F�JL        Igaz, ha a fájl effektíven a felhasználó tulajdona.\n"
+"      -G F�JL        Igaz, ha a fájl effektíven a csoport tulajdona.\n"
+"      -N F�JL        Igaz, ha a fájl módosult utolsó olvasása óta.\n"
+"    \n"
+"      F�JL1 -nt F�JL2  Igaz, ha fájl1 újabb fájl2-nél (a módosítási dátum\n"
+"                       alapján).\n"
+"    \n"
+"      F�JL1 -ot F�JL2  Igaz, ha fájl1 régebbi fájl2-nél.\n"
+"    \n"
+"      F�JL1 -ef F�JL2  Igaz, ha fájl1 hard link fájl2-re.\n"
+"    \n"
+"    Karakterlánc-operátorok:\n"
+"    \n"
+"      -z SZÖVEG      Igaz, ha SZÖVEG üres.\n"
+"    \n"
+"      -n SZÖVEG      Igaz, ha SZÖVEG nem üres.\n"
+"    \n"
+"      SZÖVEG1 = SZÖVEG2\n"
+"                     Igaz, ha a két SZÖVEG egyezik.\n"
+"      SZÖVEG1 != SZÖVEG2\n"
+"                     Igaz, ha a két SZÖVEG nem egyezik.\n"
+"      SZÖVEG1 < SZÖVEG2\n"
+"                     Igaz, ha SZÖVEG1 SZÖVEG2 előtt van a betűrendben.\n"
+"      SZÖVEG1 > SZÖVEG2\n"
+"                     Igaz, ha SZÖVEG1 SZÖVEG2 után van a betűrendben.\n"
+"    \n"
+"    További operátorok:\n"
+"    \n"
+"      -o BE�LL�T�S   Igaz, ha a parancsértelmező-beállítás engedélyezve\n"
+"                     van.\n"
+"      -v V�LT        Igaz, ha a V�LT parancsértelmező-változó be van "
+"állítva.\n"
+"      -R V�LT        Igaz, ha a V�LT parancsértelmező-változó be van "
+"állítva,\n"
+"                     és névhivatkozás.\n"
+"      ! KIF          Igaz, ha KIF hamis.\n"
+"      KIF1 -a KIF2   Igaz, ha KIF1 ÉS KIF2 is igaz.\n"
+"      KIF1 -o KIF2   Igaz, ha KIF1 VAGY KIF2 igaz.\n"
+"    \n"
+"      arg1 OP arg2   Aritmetikai összehasonlítások. OP lehet: -eq, -ne,\n"
+"                     -lt, -le, -gt vagy -ge.\n"
+"    \n"
+"    A kétoperandusú aritmetikai operátorok igazat adnak, ha ARG1 rendre\n"
+"    egyenlő, nem egyenlő, kisebb, kisebb vagy egyenlő, nagyobb, nagyobb\n"
+"    vagy egyenlő, mint ARG2.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, ha a KIF igaz; sikertelenséggel, ha a KIF hamis, "
+"vagy\n"
+"    érvénytelen argumentumokat kap."
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Feltételes kifejezések kiértékelése.\n"
+"    \n"
+"    Ez a „test� beépített parancs szinonimája, de annyiban eltér tőle,\n"
+"    hogy az utolsó argumentuma „]� kell legyen – a nyitó „]�-lel összhangban."
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Végrehajtási idők kiírása.\n"
+"    \n"
+"    Megjeleníti a kumulált felhasználói- és rendszergépidőt, amelyet a\n"
+"    parancsértelmező és gyermekfolyamatai használtak.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Mindig sikeres."
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"Szignálok és más események elfogása.\n"
+"    \n"
+"    Meghatároz és aktivál eseménykezelőket, amelyek szignálok érkezésekor\n"
+"    vagy más körülmények bekövetkezésekor futnak.\n"
+"    \n"
+"    Az ARG az a parancs, amelyet a parancsértelmező beolvas és végrehajt a\n"
+"    SZIGN�LOK bekövetkezésekor. Ha az ARG hiányzik (és egy SZIGN�L van\n"
+"    megadva) vagy az ARG egy „-�, akkor minden szignálkezelő visszaáll az\n"
+"    alapértelmezett viselkedésre. Ha az ARG üres, akkor a megadott "
+"SZIGN�LOK\n"
+"    bekövetkezésekor nem történik semmi a parancsértelmezőben és új\n"
+"    gyermekfolyamataiban.\n"
+"    \n"
+"    Ha a SZIGN�L értéke EXIT (0), az ARG a parancsértelmezőből való "
+"kilépéskor\n"
+"    fut. Ha értéke DEBUG, az ARG minden parancs előtt fut. Ha a SZIGN�L "
+"értéke\n"
+"    RETURN, az ARG a . vagy source kulcsszó használatával futtatott "
+"függvény\n"
+"    vagy parancsfájl befejeződésekor fut le. Ha az érték ERR, akkor az ARG "
+"a\n"
+"    parancsok olyan hibáikor fut le, amikor a parancsértelmező kilépne a -e\n"
+"    kapcsoló használatakor.\n"
+"    \n"
+"    Argumentumok nélkül a trap kilistázza az összes szignált és parancsot.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -l\ta rendszeren érvényes szignálnevek és sorszámaik kilistázása\n"
+"      -p\tkilistázza a trap által beállított eseménykezelőket\n"
+"    \n"
+"    A SZIGN�L értéke a <signal.h>-ban megtalálható szignálnév vagy szám.\n"
+"    A szignálnevek kis- és nagybetűkre érzéketlenek, a SIG előtag "
+"elhagyható.\n"
+"    Szignált a parancsértelmezőnek a „kill -szignál $$� paranccsal\n"
+"    lehet küldeni.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, kivéve ha a SZIGN�L érvénytelen, vagy érvénytelen\n"
+"    kapcsolót kap."
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"Tájékoztatás egy parancs típusáról.\n"
+"    \n"
+"    Minden NÉV esetén kiírja, hogy hogy lenne értelmezve parancsnévként.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -a\tminden NÉVRE illeszkedő futtatható parancs felsorolása,\n"
+"      \t\tbeleértve az aliasokat, beépített parancsokat, és a\n"
+"      \t\tfüggvényeket (ha „-p� nem tiltja)\n"
+"      -f\tfüggvényeket ne keressen\n"
+"      -P\tcsak a PATH-ban keresse a NEVET, akkor is, ha van ilyen nevű\n"
+"      \t\talias, parancs vagy függvény\n"
+"      -p\ta végrehajtható fájl nevét írja ki, ha amely végrehajtódna\n"
+"      \t\ta parancs kiadásakor. Ha ez nem fájl lenne, nem ír ki semmit\n"
+"      -t\tegyetlen szót ír ki, amely NÉV típusát jelzi: „alias�,\n"
+"      \t\t„keyword� (kulcsszó), „function� (függvény), „builtin�\n"
+"      \t\t(beépített parancs), „file� (fájl) vagy „� (nem található)\n"
+"    \n"
+"    Kapcsolók:\n"
+"      NÉV\tÉrtelmezendő parancsnév.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel lép ki, ha minden NÉV megtalálható, sikertelenül, ha nem."
+
+#: builtins.c:1431
+#, fuzzy
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Parancsértelmező erőforráskorlátjainak beállítása.\n"
+"    \n"
+"    Szabályozási lehetőséget ad a parancsértelmező által elérhető "
+"erőforrások\n"
+"    korlátozásához, ha a rendszer támogatja.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -S\ta puha (soft) korlátozás használata\n"
+"      -H\ta kemény (hard) korlátozás használata\n"
+"      -a\taz összes aktuális korlátozás kilistázása\n"
+"      -b\tfoglalatok (socket) puffermérete\n"
+"      -c\tcore fájlok maximális mérete (0 tiltja)\n"
+"      -d\tfolyamatok maximális adatszegmens-mérete\n"
+"      -e\ta maximális ütemezési prioritás (nice)\n"
+"      -f\ta parancsértelmező és gyermekei által írható legnagyobb fájl\n"
+"      -i\tvárakozó szignálok maximális száma\n"
+"      -k\ta folyamathoz lefoglalt kqueue-k maximális száma\n"
+"      -l\tfolyamatonként foglalható memória maximális mérete\n"
+"      -m\ta maximálisan operatív memóriában tartható terület mérete\n"
+"      -n\tnyitott fájlleírók maximális száma\n"
+"      -p\ta csővezetékpuffer mérete\n"
+"      -q\ta POSIX üzenetsorokban tartható byte-ok száma\n"
+"      -r\ta maximális valós idejű ütemezési prioritás\n"
+"      -s\tmaximális veremméret\n"
+"      -t\tmaximális processzoridő másodpercekben\n"
+"      -u\tfelhasználói folyamatok maximális száma\n"
+"      -v\tvirtuális memória mérete\n"
+"      -x\tfájlzárolások maximális száma\n"
+"      -P\tpszeudoterminálok maximális száma\n"
+"      -T\tszálak maximális száma\n"
+"    \n"
+"    Nem minden kapcsoló érhető el minden platformon.\n"
+"    \n"
+"    Ha a KORL�T meg van adva, az lesz az új értéke a megadott erőforrásnak.\n"
+"    Speciális KORL�T-értékek: „hard� (jelenlegi kemény korlát értéke),\n"
+"    „soft� (jelenlegi puha korlát értéke) és „unlimited� (korlátozás "
+"nélkül).\n"
+"    Ha nincs kapcsoló megadva, -f az alapértelmezett.\n"
+"    \n"
+"    Az értékek 1024 byte-os egységekben értendőek, kivéve a -t, amely\n"
+"    másodpercekben, a -p, amely 512 byte-okban, valamint a -u, amely "
+"darabban\n"
+"    értendő.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, kivéve érvénytelen kapcsoló vagy hiba esetében."
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"A fájlmódmaszk kiírása vagy beállítása.\n"
+"    \n"
+"    Beállítja a fájllétrehozási maszkot a MÓDRA. Ha a MÓD hiányzik, az\n"
+"    aktuális értékét írja ki.\n"
+"    Fájlok létrehozásakor az alapértelmezett jogokból ki lesznek maszkolva\n"
+"    az itt megadott bitek. Ez nem akadályozza meg, hogy a program vagy a\n"
+"    felhasználó később megváltoztassa a fájl jogait.\n"
+"    \n"
+"    Ha a MÓD számjeggyel kezdődik, oktális számként lesz értelmezve; "
+"egyébként\n"
+"    a chmod(1) által használt szimbolikus formátumban.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -p\tha a MÓD hiányzik, a kimenet újrahasználható formátumban legyen\n"
+"      -S\ta kimenet használja a szimbolikus formát (különben oktálisat)\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel lép ki, kivéve ha a MÓD vagy egy kapcsoló érvénytelen."
+
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"Munka befejezésének megvárása, és a kilépési kód visszaadása.\n"
+"    \n"
+"    Az ID számú folyamat befejezésére vár, majd jelzi a kilépési kódját.\n"
+"    Az ID lehet egy PID vagy egy %MUNKASZ�M. Ha az ID nincs megadva, minden\n"
+"    aktív gyermekfolyamat befejezését bevárja, és nullával tér vissza. Ha "
+"az\n"
+"    ID munkaszám, a csővezeték összes folyamatát bevárja.\n"
+"    \n"
+"    Ha a -n kapcsoló meg van adva, megvárja a következő feladat "
+"befejezését,\n"
+"    és annak kilépési kódját adja vissza.\n"
+"    \n"
+"    Ha a -f kapcsoló meg van adva és a munkakezelés engedélyezve van, akkor\n"
+"    megvárja a megadott azonosító befejezését, ahelyett hogy arra várna az\n"
+"    az állapot megváltoztatásához.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    ID kilépési kódjával tér vissza; érvénytelen ID vagy kapcsoló esetén\n"
+"    sikertelenül."
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"Folyamat befejezésének megvárása, és a kilépési kód visszaadása.\n"
+"    \n"
+"    A PID számú folyamat befejezésére vár, majd jelzi a kilépési kódját.\n"
+"    Ha nincs megadva PID, minden aktív gyermekfolyamatot bevár, és nullával\n"
+"    tér vissza. A PID egy folyamatazonosító kell legyen.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Az utolsó PID kilépési kódjával tér vissza; érvénytelen PID vagy "
+"kapcsoló\n"
+"    esetén sikertelenül."
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Egy lista minden elemére parancs végrehajtása.\n"
+"    \n"
+"    A „for� ciklus végrehajt egy parancssorozatot a megadott listán. Ha az\n"
+"    „in SZAVAK ...;� rész hiányzik, „in \"$@\"� az alapértelmezés. Minden\n"
+"    iterációnál a NÉV értéke a SZAVAK lista megfelelő elemére lesz állítva,\n"
+"    és így futnak le a PARANCSOK.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Az utolsó parancs kilépési kódját adja vissza."
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Aritmetikai for-ciklus.\n"
+"    \n"
+"    Ekvivalens a következővel:\n"
+"    \t(( KIF1 ))\n"
+"    \twhile (( KIF2 )); do\n"
+"    \t\tPARANCSOK\n"
+"    \t\t(( KIF3 ))\n"
+"    \tdone\n"
+"    A KIF1, KIF2 és KIF3 aritmetikai kifejezések. Ha valamelyik el van "
+"hagyva,\n"
+"    akkor úgy működik, mintha értéke 1 lenne.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Az utolsó parancs kilépési kódját adja."
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Szavak kiválasztása egy listából, és egy parancs végrehajtása rá.\n"
+"    \n"
+"    A SZAVAK kiértékelésre kerülnek, és egy szólistát képeznek. A szavak a\n"
+"    szabványos hibakimenetre kerülnek soronként, sorszámozva. Ha az\n"
+"    „in SZAVAK ...;� rész hiányzik, „in \"$@\"� az alapértelmezés. Ezután\n"
+"    megjelenik a PS3 prompt, és egy sorszámot vár a szabványos bemeneten.\n"
+"    Érvényes sorszám megadásakor a PARANCSOKAT végrehajtja úgy, hogy a NÉV\n"
+"    a megfelelő sorszámú elem értékét kapja. Ha a sor üres, újból "
+"megjelennek\n"
+"    a SZAVAK és a prompt, és újból lehet választani. A parancs EOF bemenet\n"
+"    esetén fejeződik be. Bármely más érték beolvasásakor a NÉV null lesz.\n"
+"    A beolvasott sor a REPLY változóba kerül. A PARANCSOK minden választás\n"
+"    után végrehajtásra kerülnek egy break parancs végrehajtásáig.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Az utolsó parancs kilépési kódját adja vissza."
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"A csővezeték végrehajtási idejének kiírása.\n"
+"    \n"
+"    A CS�VEZETÉK végrehajtása és egy összefoglaló kiírása a végrehajtás "
+"közben\n"
+"    eltelt valós időről, a használt felhasználói- és rendszergépidőkről\n"
+"    a CS�VEZETÉK befejeződésekor.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -p\taz összefoglaló megjelenítése a hordozható POSIX formában\n"
+"    \n"
+"    A TIMEFORMAT változó értéke felhasználásra kerül a kimenet formázásakor\n"
+"    \n"
+"    Kilépési kód:\n"
+"    A kilépési kód a CS�VEZETÉK kilépési kódja lesz."
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Parancsok végrehajtása mintaillesztés alapján.\n"
+"    \n"
+"    A PARANCSOK végrehajtása azon SZAVAKON, amelyek illeszkednek a MINT�RA.\n"
+"    Több mintát „|� jellel lehet elválasztani. A minták a fájlnév-"
+"helyettesítés\n"
+"    formátumát használják.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Az utolsó parancs kilépési kódját adja vissza."
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Parancsok végrehajtása feltételesen.\n"
+"    \n"
+"    Az „if PARANCSOK� lista végrehajtásra kerül. Ha kilépési kódja nulla,\n"
+"    akkor a „then PARANCSOK� lista kerül végrehajtásra. Ha nem, akkor az\n"
+"    első nullával kilépő „elif PARANCSOK� listához tartozó „then PARANCSOK�\n"
+"    lista kerül végrehajtásra. Ha egyik sem teljesül, az „else\n"
+"    PARANCSOK� lista kerül végrehajtásra. Az egész szerkezet kilépési kódja\n"
+"    az utoljára végrehajtott parancs kilépési kódja, vagy nulla, ha nem\n"
+"    teljesült egyik feltétel sem.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Az utoljára végrehajtott parancs kilépési kódja."
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Parancsok végrehajtása amíg a feltétel teljesül.\n"
+"    \n"
+"    A PARANCSOK végrehajtása addig, amíg a „while PARANCSOK� utolsó "
+"parancsa\n"
+"    nullával lép ki.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Az utolsónak végrehajtott parancs kilépési kódja."
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Parancsok végrehajtása amíg a feltétel nem teljesül.\n"
+"    \n"
+"    A PARANCSOK értelmezése és végrehajtása addig, amíg az „until "
+"PARANCSOK�\n"
+"    utolsó parancsa nem nullával lép ki.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Az utolsónak végrehajtott parancs kilépési kódja."
+
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"Egy NÉV nevű társfolyamat létrehozása.\n"
+"    \n"
+"    PARANCS aszinkron végrehajtása, a parancs szabványos ki- és bemenetének\n"
+"    átirányításával egy-egy csővezetékbe, amelyek fájlleírói a NÉV tömb-\n"
+"    változó 0-s és 1-es elemeibe kerülnek a végrehajtó parancsértelmezőben.\n"
+"    Az alapértelmezett NÉV: „COPROC�.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    A coproc parancs 0-s kilépési kóddal tér vissza."
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"Parancsértelmező-függvény definiálása.\n"
+"    \n"
+"    Létrehoz egy NÉV nevű függvényt. Ha a NÉV parancsként végrehajtásra\n"
+"    kerül, a PARANCSOK futnak a hívó parancsértelmező környezetében. A NÉV\n"
+"    hívásakor az argumentumok a függvényből $1...$n néven érhetőek el, míg "
+"a\n"
+"    függvény neve $FUNCNAME-ként.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, kivéve ha a NÉV csak olvasható."
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Parancsok csoportosítása egy egységgé.\n"
+"    \n"
+"    Egy csoportként hajt végre egy parancssorozatot. Ez egy módja a ki- és\n"
+"    bemenetek parancshalmazba való átirányításának.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Az utolsó parancs kilépési kódját adja vissza."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"Egy munka előtérbe hozása.\n"
+"    \n"
+"    Megegyezik az „fg� parancs MUNKASZ�M argumentumával. Egy megszakított\n"
+"    vagy háttérben futó munkát hoz előtérbe. A MUNKASZ�M lehet munkanév "
+"vagy\n"
+"    munkaazonosító is. Egy záró „&� megadása a munkát háttérbe küldi, mint\n"
+"    a „bg� parancs.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    A visszaállított parancs kilépési kódjával lép ki."
+
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Aritmetikai kifejezések kiértékelése.\n"
+"    \n"
+"    A KIFEJEZÉS az aritmetikai kiértékelés szabályai szerint kerül\n"
+"    kiértékelésre. Megegyezik a „let KIFEJEZÉS� paranccsal.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    1-gyel tér vissza, ha KIFEJEZÉS értéke 0, különben 0-val."
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"Feltételes parancs végrehajtása.\n"
+"    \n"
+"    0 vagy 1 kilépési kódot ad a KIFEJEZÉS kiértékelésének eredményétől\n"
+"    függően. A kifejezések a „test� parancs által használt primitívekből\n"
+"    épülnek fel, és a következő operátorokkal keverhetőek.\n"
+"    \n"
+"      ( KIFEJEZÉS )\tA KIFEJEZÉS értékét adja vissza\n"
+"      ! KIFEJEZÉS\tIgaz, ha a KIFEJEZÉS hamis\n"
+"      KIF1 && KIF2\tIgaz, ha KIF1 és KIF2 is igaz\n"
+"      KIF1 || KIF2\tIgaz, ha KIF1 vagy KIF2 igaz\n"
+"    \n"
+"    Az „==� és „!=� operátorok használatánál a jobbérték mintaként\n"
+"    értelmeződik, és fájlnévillesztés történik. A hasonlóan működő „=~�\n"
+"    operátor használatakor a jobbérték reguláris kifejezésként kerül\n"
+"    illesztésre.\n"
+"    \n"
+"    Az „&&� és „||� operátorok rövidzár tulajdonságúak, vagyis KIF2-t nem\n"
+"    értékelik ki, ha KIF1-ből is megállapítható a kifejezés értéke.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    0 vagy 1 a KIFEJEZÉST�L függően."
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"Közös parancsértelmező-változók és használatuk.\n"
+"    \n"
+"    BASH_VERSION\tVerzióadatok erről a Bash-ről\n"
+"    CDPATH\tKettőspontokkal elválasztott könyvtárlista, amelyekben a\n"
+"    \t\t„cd� keres\n"
+"    GLOBIGNORE\tKettőspontokkal elválasztott mintalista, amelyekre\n"
+"    \t\tilleszkedő nevű fájlok nem kerülnek útvonal-kiegészítésre\n"
+"    HISTFILE\tA parancselőzményeket tároló fájl neve\n"
+"    HISTFILESIZE\tAz előzményfájl maximális hossza sorokban\n"
+"    HISTSIZE\tA parancsértelmező által kezelt előzménysorok maximális\n"
+"    \t\tszáma\n"
+"    HOME\tA saját könyvtár teljes abszolút útvonala\n"
+"    HOSTNAME\tA parancsértelmezőt futtató gép neve\n"
+"    HOSTTYPE\tA Bash-t futtató CPU típusa\n"
+"    IGNOREEOF\tA parancsértelmező viselkedését állítja, hogy mit tegyen,\n"
+"    \t\tha egy sor elején EOF karaktert kap bemenetén. Ha ez a változó\n"
+"    \t\tlétezik, az értékében megadott számú EOF karaktert nem\n"
+"    \t\tvesz figyelembe (alapértelmezetten 10). Ha nincs beállítva,\n"
+"    \t\tEOF-ra kilép a parancsértelmező\n"
+"    MACHTYPE\tA Bash-t futtató gépet leíró karakterlánc\n"
+"    MAILCHECK\tMegadott számú másodpercenként keres a Bash új leveleket\n"
+"    MAILPATH\tKettőspontokkal elválasztott fájlnévlista, ahol a Bash\n"
+"    \t\túj leveleket keres\n"
+"    OSTYPE\tA Bash-t futtató gépen futó UNIX-változat neve (verziója)\n"
+"    PATH\tKettőspontokkal elválasztott könyvtárlista, amelyekben a\n"
+"    \t\tBash futtatható programokat keres parancsvégrehajtáskor\n"
+"    PROMPT_COMMAND\tAz elsődleges prompt kiírása előtt végrehajtandó\n"
+"    \t\t\tparancs\n"
+"    PS1\t\tAz elsődleges prompt\n"
+"    PS2\t\tA másodlagos prompt\n"
+"    PWD\t\tAz aktuális könyvtár teljes útvonala\n"
+"    SHELLOPTS\tAz engedélyezett parancsértelmező-beállítások "
+"kettőspontokkal\n"
+"    \t\telválasztott listája\n"
+"    TERM\tAz aktuális termináltípus neve\n"
+"    TIMEFORMAT\tA „time� parancs által használt időformátum\n"
+"    auto_resume\tNem üres érték esetén egy egy szóból álló parancs először\n"
+"    \t\ta megszakított munkák nevei között lesz keresve. Találat\n"
+"    \t\tesetén a munka előtérbe kerül. „exact� érték esetén\n"
+"    \t\tpontosan megegyező nevet keres, „substring� esetén tetszőleges\n"
+"    \t\tegyezést, minden más érték esetén a szó elején keres\n"
+"    histchars\tElőzménykiegészítést és gyors cserét vezérlő karaktereket\n"
+"    \t\tad meg. Az első karakter az előzménybehelyettesítő karakter\n"
+"    \t\t(általában „!�), a második a gyorscsere-karakter (általában\n"
+"    \t\t„^�), a harmadik pedig az előzménymegjegyzés (általában „#�)\n"
+"    HISTIGNORE\tKettőspontokkal elválasztott mintalista, amely mintákra\n"
+"    \t\tilleszkedő parancsok nem kerülnek az előzmények közé\n"
+
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Könyvtárak verembe tétele.\n"
+"   \n"
+"    Egy könyvtárat tesz a könyvtárverem tetejére, vagy forgatja a vermet,\n"
+"    az új felső elemmé a jelenlegi munkakönyvtárat téve. Argumentumok\n"
+"    nélkül hívva a két felső könyvtárat cseréli meg.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -n\tNe váltson könyvtárat hozzáadáskor, vagyis csak a\n"
+"    \t\tvermet változtassa.\n"
+"    \n"
+"    Argumentumok:\n"
+"      +N\tÚgy forgatja a vermet, hogy az N-edik könyvtár (0-tól\n"
+"    \t\tkezdve, a „dirs� által kiírt listán balról számolva)\n"
+"    \t\tkerüljön a verem tetejére.\n"
+"    \n"
+"      -N\tÚgy forgatja a vermet, hogy az N-edik könyvtár (0-tól\n"
+"    \t\tkezdve, a „dirs� által kiírt listán jobbról számolva)\n"
+"    \t\tkerüljön a verem tetejére.\n"
+"    \n"
+"      ktár\tA verem tetejére helyezi KT�R könyvtárat, és ugyanezt\n"
+"    \t\tállítja be új munkakönyvtárnak.\n"
+"    \n"
+"    A „dirs� beépített parancs listázza a könyvtárvermet.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, kivéve érvénytelen argumentum vagy könyvtárváltás\n"
+"    során történő hiba esetén."
+
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Könyvtárak eltávolítása a veremből.\n"
+"    \n"
+"    Elemeket vesz ki a könyvtárveremből. Argumentumok nélkül kiveszi a\n"
+"    legfelső elemet, és a kivett elemre állítja az új munkakönyvtárat.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -n\tNe váltson könyvtárat eltávolításkor, vagyis csak a vermet\n"
+"    \t\tváltoztassa.\n"
+"    \n"
+"    Argumentumok:\n"
+"      +N\tEltávolítja az N-edik elemet a „dirs� által kiírt listán,\n"
+"    \t\tnullától, balról számolva. Pl. a „popd +0� az első, míg a\n"
+"    \t\t„popd +1� a második könyvtárat távolítja el.\n"
+"      -N\tEltávolítja az N-edik elemet a „dirs� által kiírt listán,\n"
+"    \t\tnullától, jobbról számolva. Pl. a „popd -0� az utolsó,\n"
+"    \t\ta „popd -1� az utolsó előtti könyvtárat távolítja el.\n"
+"    \n"
+"    A „dirs� beépített parancs listázza a könyvtárvermet.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, kivéve érvénytelen argumentum vagy könyvtárváltás\n"
+"    során történő hiba esetén."
+
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"A könyvtárverem megjelenítése.\n"
+"    \n"
+"    Megjeleníti a jelenleg megjegyzett könyvtárakat. A könyvtárakat a\n"
+"    „pushd� paranccsal lehet a verembe rakni; és a „popd� paranccsal "
+"kivenni.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -c\ta könyvtárverem törlése az összes elem eltávolításával\n"
+"      -l\ta saját könyvtárat ne rövidítse a listázáskor egy tilde (~)\n"
+"      -p\ta könyvtárverem kiírása soronként egy elemmel\n"
+"      -v\ta könyvtárverem kiírása soronként egy elemmel, a vermen\n"
+"    \t\tbelüli pozíció jelölésével\n"
+"    \n"
+"    Argumentumok:\n"
+"      +N\tN darab bejegyzést jelenít meg az argumentum nélkül a dirs\n"
+"    \t\táltal megjelenített listán balról számolva, nullától kezdve.\n"
+"      -N\tN darab bejegyzést jelenít meg az argumentum nélkül a dirs\n"
+"    \t\táltal megjelenített listán jobbról számolva, nullától kezdve.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, kivéve érvénytelen argumentum vagy hiba esetén."
+
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"Parancsételmező-kapcsolók beállítása és törlése.\n"
+"    \n"
+"    Minden megadott OPTNÉV kapcsoló beállítása. Argumentumok nélkül hívva\n"
+"    felsorol minden megadott OPTNEVET – vagy az összes parancsértelmező\n"
+"    kapcsolót, ha nincsenek OPTNEVEK megadva – annak jelzésével, hogy be\n"
+"    vannak-e állítva vagy sem.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -o\tOPTNEVEK korlátozása a „set -o�-val használtakra\n"
+"      -p\tminden kapcsoló kilistázása az állapotuk jelzésével\n"
+"      -q\tkimenet elnyelése\n"
+"      -s\tminden OPTNÉV engedélyezése\n"
+"      -u\tminden OPTNÉV tiltása\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, ha az OPTNÉV engedélyezve van; sikertelenül, ha\n"
+"    hibás kapcsolókat kap vagy az OPTNÉV tiltva van."
+
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"FORM�TUM alapján az ARGUMENTUMOK kiírása.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -v változó\ta kimenet V�LTOZÓ nevű változóba írása a szabványos\n"
+"    \t\t\tkimenet helyett\n"
+"    \n"
+"    A FORM�TUM egy karakterlánc, amely három fajta primitívből áll:\n"
+"    egyszerű karakterek, amelyeket a parancs a kimenetre másol; escape-\n"
+"    karaktersorozatok, amelyeket átalakítva másol a kimenetre; valamint\n"
+"    formátumjelzők, amelyek rendre a következő argumentum kiírását\n"
+"    szabályozzák.\n"
+"    \n"
+"    A printf(1) által használt szokásos jelzőkön túl a\n"
+"    következőket ismeri a printf parancs:\n"
+"    \n"
+"      %b\tkarakterlánc kiírása az escape-szekvenciák értelmezése után\n"
+"      %q\targumentum idézőjelezése olyan módon, hogy parancsértelmező\n"
+"    \t\tbemeneteként használható legyen\n"
+"      %(fmt)T\tdátum-idő karakterlánc kiírása az FMT mint strftime(3)\n"
+"    \t\tformátum-karakterlánc használatával\n"
+"    \n"
+"    A formátum szükség szerint újrafelhasználásra kerül az összes "
+"argumentum\n"
+"    elfogyasztásához. Ha kevesebb argumentum van a formátumnak "
+"szükségesnél,\n"
+"    az extra formátumjelzők úgy viselkednek, mintha nulla érték vagy null\n"
+"    karakterlánc lett volna megadva.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, kivéve ha hibás kapcsolókat kap, vagy az írás/\n"
+"    értékadás hibával járt."
+
+#: builtins.c:1971
+#, fuzzy
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Megadja, hogy a Readline hogyan egészítse ki az argumentumokat.\n"
+"    \n"
+"    Minden NÉVHEZ megadja, hogyan egészítse ki a Readline az "
+"argumentumokat.\n"
+"    Ha nincsenek kapcsolók megadva, a jelenlegi érték kerül kiírásra,\n"
+"    újrafelhasználható módon.\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -p\tmeglévő kiegészítésmegadások listázása újrahasználható módon\n"
+"      -r\tkiegészítésmegadások törlése minden NÉVT�L; vagy ha nincs\n"
+"    \t\tNÉV megadva, az összes törlése\n"
+"      -D\tkiegészítések és műveletek alkalmazása alapértelmezésben, ha\n"
+"    \t\taz adott parancshoz nincs kiegészítés megadva\n"
+"      -E\tkiegészítések és műveletek alkalmazása az „üres� parancsokra,\n"
+"    \t\tvagyis a sor elején\n"
+"      -I\tkiegészítések és műveletek alkalmazása a kezdeti (általában a\n"
+"    \t\tparancs) szóra\n"
+"    \n"
+"    Kiegészítéskor a műveletek a nagybetűs kapcsolók felsorolásának\n"
+"    sorrendjében kísérli meg a Readline. A -D elsőbbséget élvez a -E-vel\n"
+"    szemben.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, kivéve érvénytelen kapcsoló és hiba esetén."
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Lehetséges kiegészítések megjelenítése a kapcsolóktól függően.\n"
+"    \n"
+"    Függvényben való használatra szolgál a lehetséges kiegészítések "
+"generálása\n"
+"    céljából. Ha az elhagyható SZÓ argumentum is meg van adva, a SZÓRA\n"
+"    elölről illeszkedő találatok jelennek csak meg.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel lép ki, kivéve érvénytelen kapcsoló vagy hiba esetén."
+
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"Kiegészítési beállítások módosítása vagy kiírása.\n"
+"    \n"
+"    Kiegészítési beállítások listázása minden NÉVHEZ, vagy ha nincs NÉV\n"
+"    megadva, akkor az éppen zajló kiegészítésre. Ha nincs KAPCSOLÓ megadva,\n"
+"    kiírja a kiegészítési beállításokat minden NÉVHEZ vagy az aktuális\n"
+"    kiegészítéshez.\n"
+"    \n"
+"    Kapcsolók:\n"
+"    \t-o kapcsoló\ta KAPCSOLÓ kiegészítési beállítás megadása minden NÉVHEZ\n"
+"    \t-D\t\tAz alapértelmezett kiegészítés beállításainak módosítása\n"
+"    \t-E\t\tAz üres kiegészítés beállításainak módosítása\n"
+"    \t-I\t\tA kezdeti szón történő kiegészítés beállításainak módosítása\n"
+"    \n"
+"    A „-o� helyett „+o� használatával a beállítás kikapcsolható.\n"
+"    \n"
+"    Argumentumok:\n"
+"    \n"
+"    Minden NÉV egy parancsra vonatkozik, amelyhez egy kiegészítést előzőleg\n"
+"    meg kell adni a „complete� paranccsal. Ha nincs NÉV megadva, a compopt-"
+"ot\n"
+"    egy éppen kiegészítéseket generáló függvényből kell hívni, és a zajló\n"
+"    generálásra fog vonatkozni.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel lép ki, kivéve ha érvénytelen kapcsolókat kap, vagy a NÉV "
+"nincs\n"
+"    még megadva."
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"Sorok beolvasása a szabványos bemenetről egy indexelt tömbbe.\n"
+"    \n"
+"    Sorok beolvasása a szabványos bemenetről – vagy a -u megadása esetén az "
+"FD\n"
+"    fájlleíróból – egy megadott nevű TÖMBBE (elhagyása esetén az ARRAY-be).\n"
+"    \n"
+"    Kapcsolók:\n"
+"      -d elvál\tAz ELV�L használata sorlezáróként újsor helyett\n"
+"      -n szám\tLegfeljebb SZ�M sor másolása. Ha a SZ�M 0, minden sor\n"
+"      \t\tmásolásra kerül\n"
+"      -O kezdet\tKEZDET számú indextől kezdje a TÖMB-be másolást.\n"
+"      \t\tAlapértelmezés: 0\n"
+"      -s szám\tAz első SZ�M sor eldobása olvasáskor\n"
+"      -t\tA sorok végéről a záró ELV�L (alapesetben: újsor) eltávolítása\n"
+"      -u fd\tSzabványos bemenet helyett az FD fájlleíróból olvasson\n"
+"      -C parancs\tA PARANCS végrehajtása minden T�VOLS�G sor után\n"
+"      -c távolság\tA PARANCS végrehajtásai között beolvasott sorok száma\n"
+"    \n"
+"    Argumentumok:\n"
+"      TÖMB\tBeolvasáshoz használt tömb neve\n"
+"    \n"
+"    Ha a -C -c nélkül van megadva, az alapértelmezett távolság 5000.\n"
+"    A PARANCS végrehajtásakor utolsó argumentumként a parancs megkapja a\n"
+"    következő beolvasandó elem indexét.\n"
+"    \n"
+"    Ha nincs KEZDET megadva, a mapfile törli a TÖMB tömböt olvasás előtt.\n"
+"    \n"
+"    Kilépési kód:\n"
+"    Sikerrel tér vissza, kivéve érvénytelen kapcsoló vagy csak olvasható,\n"
+"    vagy nem indexelt TÖMB megadása esetén."
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Sorok olvasása egy tömbváltozóba.\n"
+"    \n"
+"    A „mapfile� szinonimája."
+
+# see $ help caller
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "Az aktuális szubrutinhívás helyével tér vissza.\n"
+#~ "    \n"
+#~ "    EXPR nélkül a "
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process: %5ld. folyamat (%s) a the_pipeline-ban"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "Ismeretlen szignál #"
diff --git a/po/id.gmo b/po/id.gmo
new file mode 100644
index 0000000..61f5320
--- /dev/null
+++ b/po/id.gmo
diff --git a/po/id.po b/po/id.po
new file mode 100644
index 0000000..b0c244e
--- /dev/null
+++ b/po/id.po
@@ -0,0 +1,6760 @@
+# Pesan Bahasa Indonesia untuk bash
+# Copyright (C) 2008 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+# Arif E. Nugroho <arif_endro@yahoo.com>, 2008, 2009, 2010, 2011, 2012, 2013, 2014.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: bash 4.3-rc2\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2014-08-06 12:45+0700\n"
+"Last-Translator: Arif E. Nugroho <arif_endro@yahoo.com>\n"
+"Language-Team: Indonesian <translation-team-id@lists.sourceforge.net>\n"
+"Language: id\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-1\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "array subscript buruk"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr ""
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: tidak dapat mengubah index ke array yang berassosiasi"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: kunci array assosiasi tidak valid"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: tidak dapat mengassign ke index tidak-numeric"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr "%s: %s: harus menggunakan subscript ketika memberikan assosiasi array"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: tidak dapat membuat: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr "bash_execute_unix_command: tidak dapat menemukan keymap untuk perintah"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: bukan karakter whitespace (spasi) pertama ditemukan `\"'"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "tidak menutup '%c' dalam %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: hilang pemisah colon"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "'%s': tidak dapat melepaskan"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr "brace expansion: cannot allocate memory for %s"
+
+#: braces.c:406
+#, fuzzy, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr "brace expansion: failed to allocate memory for %d elements"
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr "brace expansion: failed to allocate memory for `%s'"
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "`%s': nama alias tidak valid"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "pengubahan baris tidak aktif"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "'%s': nama keymap tidak valid"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: tidak dapat membaca: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "'%s': nama fungsi tidak dikenal"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s tidak terikat ke kunci apapun.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s dapat dipanggil melalui "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "'%s': tidak dapat melepaskan"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "jumlah loop"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "hanya berarti dalam sebuah `for', `while', atau `until'loop"
+
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Mengembalikan context dari panggilan subroutine saat ini.\n"
+"    \n"
+"    Tanpa EXPR, mengembalikan \"$line $filename\". Dengan EXPR,\n"
+"    mengembalikan \"$line $subroutine $filename\"; informasi extra ini\n"
+"    dapat digunakan untuk menyediakan jejak stack.\n"
+"    \n"
+"    Nilai dari EXPR mengindikasikan bagaimana banyak panggilan frames "
+"kembali sebelum\n"
+"    yang ada; Top frame adalah frame 0.    \n"
+"    Status Keluar:\n"
+"    Mengembalikan 0 kecuali shell sedang tidak menjalankan sebuah fungsi "
+"shell atau EXPR\n"
+"    tidak valid."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "HOME tidak diset"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "terlalu banyak argumen"
+
+#: builtins/cd.def:342
+#, fuzzy
+msgid "null directory"
+msgstr "top direktori yang baru."
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "OLDPWD tidak diset"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "baris %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "peringatan: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: penggunaan: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: pilihan membutuhkan sebuah argumen"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: argumen numeric dibutuhkan"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: tidak ditemukan"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: pilihan tidak valid"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: nama pilihan tidak valid"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "`%s': bukan sebuah identifier yang valid"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "nomor oktal tidak valid"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "nomor hexa tidak valid"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "nomor tidak valid"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: spesifikasi sinyal tidak valid"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "`%s': bukan sebuah pid atau spesifikasi pekerjaan yang valid"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: variabel baca-saja"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s diluar jangkauan"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "argumen"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s diluar jangkauan"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: tidak ada pekerjaan seperti itu"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: tidak ada pengontrol kerja"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "tidak ada pengontrol kerja"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: terbatas"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "terbatas"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: bukan sebuah builtin shell"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "gagal menulis: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "error menentukan atribut terminal: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "error mendapatkan atribut terminal: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: error mengambil direktori saat ini: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: spesifikasi pekerjaan ambigu"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr ""
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: tidak dapat unset: baca-saja %s"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: tidak dapat unset"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: nama aksi tidak valid"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: tidak ada spesifikasi completion"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr ""
+"peringatan: pilihan -F mungkin tidak bekerja seperti yang anda harapkan"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr ""
+"peringatan: pilihan -C mungkin tidak bekerja seperti yang anda harapkan"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "saat ini sedang tidak menjalankan fungsi completion"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "hanya dapat digunakan dalam sebuah fungsi"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr "%s: reference variable cannot be an array"
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr "%s: nameref variable self references not allowed"
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s: circular name reference"
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, fuzzy, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "%s: nilai dari berkas pendeskripsi penelusur tidak valid"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "tidak dapat menggunakan `-f' untuk membuat fungsi"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: fungsi baca-saja"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr ""
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: tidak dapat menghapus variabel array secara ini"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: tidak dapat mengubah assosiasi ke array index"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "dynamic loading tidak tersedia"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "tidak dapat membuka object shared %s: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "tidak dapat menemukan %s dalam shared object %s: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: bukan dinamically loaded"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr ""
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: bukan dinamically loaded"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: tidak dapat menghapus: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: bukan sebuah direktori"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: bukan sebuah file umum"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: file terlalu besar"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: tidak dapat menjalankan berkas binary"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: tidak dapat menjalankan: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "logout\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "bukan sebuah login shell: gunakan `exit'"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Ada pekerjaan yang terhenti.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Ada pekerjaan yang sedang berjalan.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "perintah tidak ditemukan"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "spesifikasi sejarah"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: tidak dapat membuka file sementara: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "sekarang"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "pekerjaan %d dimulai tanpa pengontrol pekerjaan"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: pilihan tidak legal -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: pilihan membutuhkan sebuah argumen -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "hashing dinonaktifkan"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: tabel hash kosong\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "tekan\tperintah\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Perintah shell cocok dengan kata kunci `"
+msgstr[1] "Perintah shell cocok dengan kata kunci `"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"tidak ada topik bantuan yang cocok dengan `%s'. Coba `help help' atau 'man -"
+"k %s' atau `info %s'."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: tidak dapat membuka: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Perintah shell ini didefinisikan secara internal. Ketik `help' untuk melihat "
+"daftar ini.\n"
+"Ketik `help nama' untuk informasi lebih lanjut mengenai fungsi `nama'.\n"
+"Gunakan `info bash' untuk informasi lebih lanjut mengenasi shell secara "
+"umum.\n"
+"Gunakan `man -k' atau `info' untuk informasi lebih lanjut mengenai perintah "
+"yang tidak ada dalam daftar ini.\n"
+"\n"
+"Sebuah asterisk (*) disebelah dari nama berarti perintah tersebut tidak "
+"aktif.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "tidak dapat menggunakan lebih dari satu pilihan dari -anrw"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "posisi sejarah"
+
+#: builtins/history.def:340
+#, fuzzy, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: argumen limit tidak valid"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: expansi sejarah gagal"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: inlib gagal"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "tidak ada pilihan lain yang diperbolehkan dengan `-x'"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: argumen harus diproses atau ID pekerjaan"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Kesalahan tidak diketahui"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "diduga sebuah ekspresi"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: bukan sebuah indeks array"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: spesifikasi file deskripsi tidak valid"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: file deskriptor %s tidak valid"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: jumlah baris tidak valid"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: asal array tidak valid"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: nama aksi tidak valid"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "nama variabel array kosong"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "bantuan array variabel dibutuhkan"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "`%s': hilang karakter format"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "`%c': spesifikasi timeout tidak valid"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "`%c': karakter format tidak valid"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "peringatan: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "format parsing problem: %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "hilang digit hexa untuk \\x"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "hilang digit hexa untuk \\%c"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "tidak ada direktori lain"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s: argumen limit tidak valid"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<direktori saat ini>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "direktori stack kosong"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "index direktori stack"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Menampilkan daftar dari direktori yang diingat saat ini. Direktori\n"
+"    menemukan jalannya kedalam daftar dengan perintah `pushd'; anda dapat "
+"memperoleh\n"
+"    backup melalui daftar dengan perintah `popd'.\n"
+"    \n"
+"    Pilihan:\n"
+"      -c\tmenghapus direktori stact dengan menghapus seluruh elemen\n"
+"      -l\tjangan menampilkan versi dengan tilde dari direktori relative\n"
+"    \tke direkori rumah anda\n"
+"      -p\tmenampilkan direktori stack dengan satu masukan per baris\n"
+"      -v\tmenampilkan direktori stack dengan satu masukan per baris diawali\n"
+"    \tdengan posisnya dalam stack\n"
+"    \n"
+"    Argumen:\n"
+"      +N\tMenampilkan masukan ke N dihitung dari kiri dari daftar yang "
+"ditampilkan oleh\n"
+"    \tdirs ketika dipanggil tanpa pilihan, dimulai dari nol.\n"
+"    \n"
+"      -N\tMenampilkan masukan ke N dihitung dari kanan dari daftar yang "
+"ditampilkan oleh\n"
+"    \tdirs ketika dipanggil tanpa pilihan, dimulai dari nol."
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Menambahkan sebuah direktori ke top dari direktori stack, atau merotasi\n"
+"    stack, membuah top baru dari stack dari working direktori saat ini.\n"
+"    Tanpa argumen, menukar top dari dua direktori.\n"
+"    \n"
+"    Pilihan:\n"
+"    -n\tmenekan perubahan normal dari direktori ketika menambahkan "
+"direktori\n"
+"    \tke stack, jadi hanya stack yang dimanipulasi.\n"
+"    \n"
+"    Argumen:\n"
+"    +N\tMerotasi stack sehingga direktori ke N (dihitung\n"
+"    \tdari kiri dari daftar yang terlihat oleh `dirs', dimulai dengan\n"
+"    \tnol) adalah di top.\n"
+"    \n"
+"    -N\tMerotasi stack sehingga direktori ke N (dihitung\n"
+"    \tdari kanan dari daftar yang terliha oleh `dirs', dimulai dengan\n"
+"    \tnol) adalah di top.\n"
+"    \n"
+"    dir\tenambahkan DIR ke direktori stack di puncak, membuatnya\n"
+"    \tcurrent working directory.\n"
+"    \n"
+"    Builtin `dirs' menampilkan direktori stack."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Manghapus masukan dalam direktori stack. Tanpa argumen,\n"
+"    menghapus top direktori dari stack, dan cd's ke top\n"
+"    direktori baru.\n"
+"    \n"
+"    Pilihan:\n"
+"    -n\tmenekan perubahan normal dari direktori ketika menghapus direktori\n"
+"    \tdari stack, jadi hanya stack yang dimanipulasi.\n"
+"    \n"
+"    Argumen:\n"
+"    -N\tmenghapus masukan ke N dihitung dari kiri dari daftar\n"
+"    \tyang ditampilkan oleh `dirs', dimulai dari nol. Sebagai contoh: `popd "
+"+0'\n"
+"    \tmenghapus direktori terakhir, `popd -1' sebelum terakhir.\n"
+"    \n"
+"    Builtin `dirs' menampilkan direktori stack."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: spesifikasi timeout tidak valid"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "error baca: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr "hanya dapat `return' dari sebuah fungsi atau script yang disource"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "tidak dapat secara simultan unset sebuah fungsi dan sebuah variable"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: bukan sebuah variabel array"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: bukan sebuah fungsi"
+
+#: builtins/setattr.def:194
+#, fuzzy, c-format
+msgid "%s: cannot export"
+msgstr "%s: tidak dapat unset"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "shift terhitung"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "tidak dapat menset dan menunset pilihan shell secara bersamaan"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: nama pilihan shell tidak valid"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "argumen nama file dibutuhkan"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: berkas tidak ditemukan"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "tidak dapat suspend"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "tidak dapat suspend sebuah login shell"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s sudah dialiasi ke `%s'\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s adalah sebuah shell dengan kata kunci\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s adalah sebuah fungsi\n"
+
+#: builtins/type.def:299
+#, fuzzy, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s adalah sebuah shell builtin\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s adalah sebuah shell builtin\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s adalah %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s memiliki hash (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: argumen limit tidak valid"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "`%c': perintah buruk"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: tidak dapat get limit: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "batas"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: tidak dapat memodifikasi batas: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "nomor oktal"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "`%c': operator mode symbolic tidak valid"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "`%c': mode karakter symbolic tidak valid"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " baris "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "perintah terakhir: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "membatalkan..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr ""
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "perintah error tidak diketahui"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "tipe perintah buruk"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "konektor buruk"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "lompat buruk"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: variabel tidak terikat"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "kehabisan waktu menunggu masukan: otomatis-keluar\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "tidak dapat menyalurkan masukan standar dari /dev/null: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "TIMEFORMAT: `%c': karakter format tidak valid"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr ""
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "pipe error"
+
+#: execute_cmd.c:4793
+#, fuzzy, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr "%s: maximum function nesting level exceeded (%d)"
+
+#: execute_cmd.c:4805
+#, fuzzy, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr "%s: maximum function nesting level exceeded (%d)"
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr "%s: maximum function nesting level exceeded (%d)"
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr ""
+"%s: dibatasi: tidak dapat menspesifikasikan '/' dalam nama nama perintah"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: perintah tidak ditemukan"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: interpreter buruk"
+
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: tidak dapat menjalankan berkas binary: %s"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "`%s': adalah sebuah shell builtin"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "tidak dapat menduplikasikan fd %d ke fd %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "expresi level rekursi terlewati"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "rekursi stack underflow"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "syntax error dalam expresi"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "mencoba menempatkan ke bukan sebuah variabel"
+
+#: expr.c:530
+#, fuzzy
+msgid "syntax error in variable assignment"
+msgstr "syntax error dalam expresi"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "dibagi oleh 0"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "bug: tanda expassign buruk"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "`:' diharapkan untuk sebuah pernyataan kondisional"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "eksponen kurang dari 0"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "idenfier diharapkan setelah pre-increment atau pre-decrement"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "hilang `)'"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "syntax error: operand diharapkan"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "syntax error: operator arithmetic tidak valid"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (error token adalah \"%s\")"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "basis arithmetic tidak valid"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: jumlah baris tidak valid"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "nilai terlalu besar untuk basis"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: expresi error\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: tidak dapat mengakses direktori orang tua"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "tidak dapat mereset mode nodelay untuk fd %d"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr ""
+"tidak dapat mengalokasikan berkas deskripsi bari untuk masukan bash dari fd "
+"%d"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "simpan bash_input: buffer telah ada untuk fd %d baru"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: pgrp pipe"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "forked pid %d terlihat dalam pekerjaan yang sedang berjalan %d"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "menghapus pekerjaan yang terhenti %d dengan proses grup %ld"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process: pid %5ld (%s) ditandai dengan tetap hidup"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: tidak ada pid seperti itu"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "sinyal %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Selesai"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Terhenti"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Terhenti(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "Berjalan"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Selesai(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Keluar %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Status tidak diketahui"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(core didump) "
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (wd: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "anak setpgid (%ld ke %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: pid %ld bukan sebuah anak dari shell ini"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: Tidak ada catatan untuk proses %ld"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: pekerjaan %d terhenti"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: tidak ada pekerjaan seperti itu"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: pekerjaan telah selesai"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: pekerjaan %d sudah berjalan di belakang (background)"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr "waitchld: mengaktifkan WNOHANG untuk menghindari blok tak terhingga"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: baris %d: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (core didump)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(wd sekarang: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: getpgrp gagal"
+
+#: jobs.c:4447
+#, fuzzy
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: baris disiplin"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: baris disiplin"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "tidak dapat menset terminal proses grup (%d)"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "tidak ada pengontrol pekerjaan dalam shell ini"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: gagal assertion: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d: assertion rusak\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "tidak diketahui"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: blok dalam daftar bebas clobbered"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: dipanggil dengan argumen blok yang sudah dibebaskan"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: dipanggil dengan argumen blok yang tidak dialokasikan"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: underflow terdeteksi; mh_nbytes diluar dari jangkauan"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: underflow terdeteksi; mh_nbytes diluar dari jangkauan"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: awal dan akhir dari ukuran potongan berbeda"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: dipanggil dengan argumen blok yang tidak teralokasikan"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc: underflow terdeteksi; my_nbytes diluar dari jangkauan"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc: underflow terdeteksi; my_nbytes diluar dari jangkauan"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: awal dan akhir dari ukuran potongan berbeda"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: tabel alokasi penuh dengan FIND_ALLOC?\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr ""
+"register_alloc: %p sudah berada dalam tabel sepertinya sudah dialokasikan?\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: %p sudah berada dalam tabel sebagai bebas?\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "basis tidak valid"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: host tidak diketahui"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: layanan tidak valid"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: spesifikasi jalur network buruk"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "operasi jaringan tidak dilayani"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: tidak dapat mengubah lokal (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: tidak dapat mengubah local (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: tidak dapat mengubah lokal (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: tidak dapat mengubah lokal (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "Anda memiliki surat dalam $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "Anda memiliki surat baru dalam $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "Surat dalam %s telah dibaca\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "syntax error: membutuhkan ekspresi arithmetic"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "syntax error: `;' tidak terduga"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "syntax error: `((%s))'"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: tipe instruksi buruk %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr ""
+"dokumen-disini di baris %d dibatasi oleh akhir-dari-berkas (diinginkan `%s')"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr "make_redirection: instruksi redireksi `%d' diluar dari jangkauan"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr ""
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "EOF tidak terduga ketika mencari untuk pencocokan `%c'"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "EOF tidak terduga ketika mencari untuk `]]'"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "syntax error dalam ekspresi kondisional: tanda `%s' tidak terduga"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "syntax error dalam ekspresi kondisional"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "tanda `%s' tidak terduga, diduga `)'"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "diduga `)'"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "argumen tidak terduga `%s' ke operator kondisional unary"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "argumen tidak terduga untuk operasi unary kondisional"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "tanda `%s' tidak terduga, operator binary kondisional diduga"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "operator binary kondisional diduga"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "argumen `%s' tidak terduga ke operator binary kondisional"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "argumen tidak terduga ke operasi binary kondisional"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "tanda `%c' tidak terduga dalam perintah kondisional"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "tanda `%s' tidak terduga dalam perintah kondisional"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "tanda %d tidak terduga dalam perintah kondisional"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "syntax error didekat tanda `%s' yang tidak terduga"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "syntax error didekat `%s'"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "syntax error: tidak terduga diakhir dari berkas"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "syntax error"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Gunakan \"%s\" untuk meninggalkan shell.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "EOF tidak terduga ketika mencari untuk pencocokan ')'"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "completion: fungsi `%s' tidak ditemukan"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr ""
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: NULL COMPSPEC"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: konektor buruk `%d'"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: berkas pendeskripsi tidak valid"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: berkas penunjuk KOSONG"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != fileno xtrace fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: '%c': format karakter tidak valid"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "berkas deskripsi diluar dari jangkauan"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: redirect ambigu"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: tidak dapat menulis berkas yang sudah ada"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: restricted: tidak dapat meredirect keluaran"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "tidak dapat membuat berkas sementara untuk dokumen disini: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: tidak dapat meng-'assign' fd ke variabel"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "/dev/(tcp|udp)/host/port tidak dilayani tanpa jaringan"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "redirection error: tidak dapat menduplikasi fd"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "tidak dapat menemukan /tmp, tolong buat!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp harus berupa sebuah nama direktori yang valid"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr ""
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: pilihan tidak valid"
+
+#: shell.c:1319
+#, fuzzy, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "tidak dapat mereset mode nodelay untuk fd %d"
+
+#: shell.c:1330
+#, fuzzy, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "tidak dapat mereset mode nodelay untuk fd %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr ""
+
+#: shell.c:1632
+#, fuzzy, c-format
+msgid "%s: Is a directory"
+msgstr "%s: bukan sebuah direktori"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "Aku tidak memiliki nama!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, versi %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Penggunaan:\t%s [GNU pilihan panjang] [pilihan] ...\n"
+"\t%s [GNU pilihan panjang] [pilihan] berkas-script ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "GNU pilihan panjang:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Pilihan shell:\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr ""
+"\t-ilrsD atau -c perintah atau -O shopt_option\t\t(hanya pemanggilan)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s atau pilihan -o\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+"Ketik `%s -c \"help set\"' untuk informasi lebih lanjut mengenai pilihan "
+"shell.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr ""
+"Ketik `%s -c help' untuk informasi lebih lanjut mengenai perintah builting "
+"shell.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "Gunakan perintah 'bashbug' untuk melaporkan bugs.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr ""
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr ""
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: operasi tidak valid"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Sinyal palsu"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Hangup"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Interupsi"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Berhenti"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Instruksi ilegal"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "BPT trace/trap"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "Instruksi ABORT"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "Instruksi EMT"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Floating point exception"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Dibunuh"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Bus error"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Kesalahan segmentasi"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Pemanggilan sistem buruk"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Pipe rusak"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Alarm clock"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Selesai"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Kodisi IO penting"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Terhenti (sinyal)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Melanjutkan"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Anak tewas atau berhenti"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Terhenti (tty input)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Terhenti (tty output)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "I/O siap"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "Batas CPU"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "Batas berkas"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Alarm (virtual)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Alarm (profile)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Window berubah"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Catatan terkunci"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Sinyal pengguna 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Sinyal pengguna 2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "HFT masukan data tertunda"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "Kelihatannya akan terjadi kegagalan power suply"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "Kelihatannya akan terjadi kerusakan sistem"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "pindahkan proses ke CPU lain"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "error dalam pemrograman"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "HFT mode monitoring diberikan"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "HFT mode monitoring ditarik"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "HFTP sound sequence telah selesai"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "Permintaan informasi"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "Sinyal tidak diketahui #%d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "substitusi buruk: tidak ada penutupan `%s' dalam %s"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: tidak dapat meng-assign daftar kedalam anggoya array"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "tidak dapat membuat pipe untuk proses substitusi"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "tidak dapat membuat anak untuk proses substitusi"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "tidak dapat membuka named pipe %s untuk membaca"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "tidak dapat membukan named pipe %s untuk menulis"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "tidak dapat menduplikasi nama pipe %s sebagai fd %d"
+
+#: subst.c:6213
+#, fuzzy
+msgid "command substitution: ignored null byte in input"
+msgstr "substitusi buruk: tidak ada penutupan \"\" dalam %s"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "tidak dapat membuat pipe untuk perintah substitusi"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "tidak dapat membuat anak untuk perintah substitusi"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute: tidak dapat menduplikasikan pipe sebagi fd 1"
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: nilai dari berkas pendeskripsi penelusur tidak valid"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, fuzzy, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: jumlah baris tidak valid"
+
+#: subst.c:7013 subst.c:7177
+#, fuzzy, c-format
+msgid "%s: invalid variable name"
+msgstr "`%s': nama alias tidak valid"
+
+#: subst.c:7256
+#, fuzzy, c-format
+msgid "%s: parameter not set"
+msgstr "%s: parameter kosong atau tidak diset"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: parameter kosong atau tidak diset"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: substring expresi < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: substitusi buruk"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: tidak dapat meng-assign dengan cara ini"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+"versi selanjutnya dari shell akan memaksa evaluasi dari sebuah penggantian "
+"aritmetika"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "substitusi buruk: tidak ada penutupan \"\" dalam %s"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "tidak cocok: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "argumen diharapkan"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: expresi integer diduga"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "')' diduga"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "`)' diduga, ditemukan %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: operator binary diduga"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: operator unary diduga"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "hilang `]'"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "syntax error: `;' tidak terduga"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "nomor sinyal tidak valid"
+
+#: trap.c:325
+#, fuzzy, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr "%s: maximum function nesting level exceeded (%d)"
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: nilai buruk dalam trap_list[%d]: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps: sinyal handler adalah SIG_DFL, mengirimkan kembali %d "
+"(%s) kediri sendiri"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: sinyal buruk %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "error mengimpor definisi fungsi untuk `%s'"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "level shell (%d) terlalu tinggi, mereset ke 1"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: tidak ada context fungsi di scope ini"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: tidak dapat meng-'assign' fd ke variabel"
+
+#: variables.c:3475
+#, fuzzy, c-format
+msgid "%s: assigning integer to name reference"
+msgstr "%s: nilai dari berkas pendeskripsi penelusur tidak valid"
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: tidak ada context fungsi dalam scope ini"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s memiliki exportstr kosong"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "karakter %d tidak valid dalam exporstr untuk %s"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "bukan `=' dalam exportstr untuk %s"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr ""
+"pop_var_context: kepala dari shell_variables bukan sebuah fungsi cbntext"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: bukan global_variable context"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr ""
+"pop_scope: kepala dari shell_variables bukan sebuah scope lingkungan "
+"sementara"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: tidak dapat membuka sebagai BERKAS"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: nilai dari berkas pendeskripsi penelusur tidak valid"
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s: diluar jangkauan"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Hak Cipta (C) 2012 Free Software Foundation, Inc."
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"Lisensi GPLv3+: GNU GPL versi 3 atau sesudahnya <http://gnu.org/licenses/gpl."
+"html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, versi %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr ""
+"Ini adalah perangkat lunak bebas; anda bebas untuk mengubah dan "
+"mendistribusikannya."
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "TIDAK ADA GARANSI, selama masih diijinkan oleh hukum yang berlaku."
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: tidak dapat mengalokasikan %lu bytes (%lu bytes teralokasi)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: tidak dapat mengalokasikan %lu bytes"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: tidak dapat mengalokasikan %lu bytes (%lu bytes teralokasi)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s: %d: tidak dapat teralokasi %lu bytes"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [name[=nilai] ... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] name [nama ...]"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpvsPVSX] [-m keymap] [-f nama berkas] [-q nama] [-u nama] [-r "
+"keyseq] [-x keyseq:perintah-shell] [keyseq:readline-function atau readline-"
+"command]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [shell-builtin [arg ...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "pemanggil [expr]"
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]] [-@]] [direktori]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "perintah [-pVv] perintah [argumen ...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilnrtux] [-p] [name[=nilai] ...]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilrtux] [-p] name[=nilai] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [pilihan] name[=nilai] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [arg ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [arg ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f nama berkas] [name ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [argumen ...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts nama optstring [arg]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a nama] [perintah [argumen ...]] [redireksi ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr ""
+"fc [-e ename] [-lnr] [pertama] [terakhir] atau fc -s [pat=rep] [perintah]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [spesifikasi pekerjaan]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [spesifikasi pekerjaan ...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p nama jalur] [-dt] [nama ...]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "bantuan [-dms] [pola ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"sejarah [-c] [-d ofset] [n] atau history -anrw [nama berkas] atau history -"
+"ps arg [arg...]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [spesifikasi pekerjaan ...] atau jobs -x perintah [args]"
+
+#: builtins.c:131
+#, fuzzy
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [spesifikasi pekerjaan ...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s spesifikasi sinyal | -n nomor sinyal | -sigspec] pid | jobsepc ... "
+"atau kill -l [sigspec]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "biarkan arg [argumen ...]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a array] [-d pembatas] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o nama-pilihan] [--] [argumen ...]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [name ...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [name[=nilai] ...] atau export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [name[=nilai] ...] atau readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source nama berkas [argumen]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". nama berkas [argumen]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [expr]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ arg... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[arg] spesifikasi sinyal ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] nama [name ...]"
+
+#: builtins.c:171
+#, fuzzy
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefilmnpqrstuvxT] [batas]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [mode]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-n] [id ...]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [pid ...]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for NAMA [in WORDS ...] ; do PERINTAH; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( exp1; exp2; exp3 )); do PERINTAH; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select NAMA [ in WORDS ... ;] do PERINTAH; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] pipeline"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case WORD in [POLA [| POLA]...) PERINTAH ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if PERINTAH; then PERINTAH; [ elif PERINTAH; then PERINTAH; ]... [ else "
+"PERINTAH; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while PERINTAH; do PERINTAH; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until PERINTAH; do PERINTAH; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [NAMA] perintah [redireksi]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function name { PERINTAH; } atau name () { PERINTAH ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ PERINTAH ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "job_spec [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( expressi ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ expressi ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "variabel - Nama dan arti dari beberapa shell variabel"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | dir]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [optname ...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v var] format [argumen]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DE] [-o pilihan] [-A action] [-G globpat] [-"
+"W daftar kata] [-F fungsi] [-C perintah] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o pilihan] [-A aksi] [-G globpat] [-W wordlist] [-"
+"F fungsi] [-C perintah] [-X filterpat] [-P prefix] [-S suffix] [word]"
+
+#: builtins.c:239
+#, fuzzy
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o pilihan] [-DE] [nama ...]"
+
+#: builtins.c:242
+#, fuzzy
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-n jumlah] [-O asal] [-s jumlah] [-t] [-u fd] [-C callback] [-c "
+"quantum] [array]"
+
+#: builtins.c:244
+#, fuzzy
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-n jumlah] [-O asal] [-s jumlah] [-t] [-u fd] [-C callback] [-c "
+"quantum] [array]"
+
+#: builtins.c:256
+#, fuzzy
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Definisikan atau tampilkan aliases.\n"
+"    \n"
+"    `alias' dengan tanpa argumen atau dengan pilihan -p menampilkan daftar\n"
+"    dari aliases dalam bentuk alias NAMA=NILAI di keluaran standar.\n"
+"    \n"
+"    Jika tidak, sebuah alias didefinisikan untuk setiap NAMA yang NILAI-nya "
+"diberikan.\n"
+"    sebuah tambahan spasi dalam NILAI menyebabkan kata selanjutnyan untuk "
+"diperikasi untuk\n"
+"    pengganti alias ketika alias diexpand.\n"
+"    \n"
+"    Pilihan:\n"
+"      -p\tTampilkan seluruh alias yang terdefinisi dalam format yang "
+"berguna\n"
+"    \n"
+"    Status Keluar:\n"
+"    alias mengembalikan true sampai sebuah NAMA diberikan yang mana belum "
+"ada alias yang\n"
+"    terdefinisi."
+
+#: builtins.c:278
+#, fuzzy
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Hapus setiap NAMA dari daftar yang mendefinisikan aliases.\n"
+"    \n"
+"    Pilihan:\n"
+"      -a\thapus semua definisi alias.\n"
+"    \n"
+"    Mengembalikan sukses kecuali sebuah NAMA bukan alias yang sudah ada."
+
+#: builtins.c:291
+#, fuzzy
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"Set Readline kunci pengikat dan variabel.\n"
+"    \n"
+"    Ikat sebuah urutan kunci ke fungsi readline atau sebuah macro, atau set\n"
+"    sebuah variabel readline. Argumen bukan-pilihan syntax yang equivalent\n"
+"    yang ditemukan dalam ~/.inputrc, tetapi harus dilewatkan sebagai sebuah "
+"argumen tunggal:\n"
+"    yang terikat '\"\\C-x\\C-r\": membaca kembali berkas inisialisasi.\n"
+"    \n"
+"    Pilihan:\n"
+"        -m keymap        Gunakan `keymap' sebagai keymap untuk durasi dari "
+"perintah\n"
+"                         ini. Nama keymap yang diterima adalah emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, dan vi-insert.\n"
+"        -l               Daftar dari nama fungsi.\n"
+"        -p               Daftar dari nama fungsi dan bindings.\n"
+"        -p               Daftar dari fungsi dan bindings dalam bentuk yang "
+"dapat digunakan sebagai\n"
+"                         masukan.\n"
+"        -S               Daftar urutan kunci yang memanggil macros "
+"dannilainya\n"
+"        -s               Daftar urutan kunci yang memanggil macros "
+"dannilainya\n"
+"                         dalam sebuah bentuk yang dapat digunakan sebagai "
+"sebuah masukan.        -V               Daftar nama variabel dan nilai\n"
+"        -v               Daftar nama variabel dan nilai dalam bentuk yang "
+"dapat digunakan\n"
+"                         sebagai masukan.\n"
+"        -q nama-fungsi   Minta tentang kunci mana yang dipanggil oleh fungsi "
+"yang disebut.\n"
+"        -u nama-fungsi   Unbind semua kunci yang terikat dengan nama-"
+"fungsi.\n"
+"        -r keyseq        Hapus binding untuk KEYSEQ.\n"
+"        -f namafile      Baca kunci bindings dari NAMAFILE.\n"
+"        -x keyseq:shell-command\tMenyebabkan SHELL-COMMAND untuk dijalankan "
+"ketika\n"
+"      \t\t\t\tKEYSEQ dimasuki.\n"
+"      \n"
+"      Status Keluar:\n"
+"      bind memberikan kembalian 0 kecuali sebuah pilihan tidak dikenal "
+"diberikan atau sebuah error terjadi."
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Keluar dari for, while, atau until loops.\n"
+"    \n"
+"    Keluar untuk FOR, WHILE atau UNTIL loop. Jika N dispesifikasikan, keluar "
+"N yang melingkupi\n"
+"    loops.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Status keluar adalah 0 kecuali N tidak lebih besar atau sama dengan 1."
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Melanjutkan for, while, atau until loops.\n"
+"    \n"
+"    Melanjutkan ke iterasi selanjutnya dari loop yang dilingkupi oleh FOR, "
+"WHILE, atau UNTIL.\n"
+"    Jika N dispesifikasikan, melanjutkan di posisi ke N dari loop yang "
+"dilingkupi.    \n"
+"    Status Keluar:\n"
+"    Status keluar adalah 0 kecuali N tidak lebih besar atau sama dengan 1."
+
+#: builtins.c:354
+#, fuzzy
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Menjalankan shell builtins.\n"
+"    \n"
+"    Menjalankan SHELL-BUILTIN dengan argumen ARGs tanpa menjalankan "
+"pencarian\n"
+"    perintah. Ini berguna ketika anda menginginkan untuk mengimplementasikan "
+"sebuah shell builtin\n"
+"    sebagai sebuah fungsi shell, tetapi butuh untuk menjalankan builtin "
+"dalah fungsi.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan status keluar dari SHELL-BUILTIN, atau salah jika SHELL-"
+"BUILTIN adalah\n"
+"    bukan sebuah shell builtin.."
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Mengembalikan context dari panggilan subroutine saat ini.\n"
+"    \n"
+"    Tanpa EXPR, mengembalikan \"$line $filename\". Dengan EXPR,\n"
+"    mengembalikan \"$line $subroutine $filename\"; informasi extra ini\n"
+"    dapat digunakan untuk menyediakan jejak stack.\n"
+"    \n"
+"    Nilai dari EXPR mengindikasikan bagaimana banyak panggilan frames "
+"kembali sebelum\n"
+"    yang ada; Top frame adalah frame 0.    \n"
+"    Status Keluar:\n"
+"    Mengembalikan 0 kecuali shell sedang tidak menjalankan sebuah fungsi "
+"shell atau EXPR\n"
+"    tidak valid."
+
+#: builtins.c:387
+#, fuzzy
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"Pindah direktori kerja shell.\n"
+"    \n"
+"    Pindah direktori saat ini ke DIR. Variabel $HOME adalah\n"
+"    default DIR.\n"
+"    \n"
+"    Variabel CDPATH mendefinisikan jalur pencarian untuk\n"
+"    direktori yang berisi DIR. Alternatif nama direktori dalam CDPATH\n"
+"    dipisahkan oleh sebuah colon (:). Sebuah nama direktori kosong adalah "
+"sama dengan\n"
+"    direktori saat ini. i.e. `.'. Jika DIR dimulai dengan sebuah slash (/),\n"
+"    maka CDPATH tidak digunakan.\n"
+"    \n"
+"    Jika direktori tidak ditemukan, dan\n"
+"    pilihan shell cdable_vars' diset, maka coba kata sebagai sebuah nama\n"
+"    variabel. Jika variabel itu memiliki sebuah nilai, maka  nilai dari "
+"variabel itu yang digunakan\n"
+"    \n"
+"    Pilihan:\n"
+"      -L\tmemaksa link simbolik untuk diikuti\n"
+"      -P\tgunakan struktur physical direktori tanpa mengikuti link\n"
+"    symbolik\n"
+"    \n"
+"    Default adalah mengikuti link simbolik, seperti dalam `-L' "
+"dispesifikasikan.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan 0 jika direktori berubah; bukan nol jika tidak."
+
+#: builtins.c:425
+#, fuzzy
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"Menampilkan nama dari direktori yang digunakan sekarang.\n"
+"    \n"
+"    Pilihan:\n"
+"      -L\tmenampilkan nilai dari $PWD jika ini nama dari direktori\n"
+"    \tyang digunakan sekarang\n"
+"      -P\tmenampilkan direktori pisik, tanpa link simbolik apapun\n"
+"    \n"
+"    Secara default, `pwd' berlaku seperi jika pilihan `-L' "
+"dispesifikasikan.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan 0 kecuali jika sebuah pilihan tidak valid diberikan atau "
+"direktori sekarang\n"
+"    tidak bisa dibaca."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Perintah kosong.\n"
+"    \n"
+"    Tidak ada efek; perintah tidak melakukan apa-apa.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Selalu sukses."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Mengembalikan sebuah hasil yang sukses.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Selalu sukses."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Mengembalikan sebuah kembaliah yang tidak sukses.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Selalu gagal."
+
+#: builtins.c:471
+#, fuzzy
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Menjalankan sebuah perintah sederhana atau menampilkan informasi mengenai "
+"perintah.\n"
+"    \n"
+"    Menjalankan PERINTAH tanpa ARGS menekan fungsi pencarian shell, atau "
+"menampilkan\n"
+"    informasi mengenasi PERINTAH tertentu. Dapat digunakan untuk memanggil "
+"perintah\n"
+"    dalam disk ketika sebuah fungsi dengan nama yang sama ada.\n"
+"    \n"
+"    Pilihan:\n"
+"      -p\tgunakan sebuah nilai default untuk PATH yang menjamin untuk "
+"mencari seluruh\n"
+"    \tpenggunaan stadar\n"
+"      -v\tmenampilkan deskripsi dari PERINTAH sama dengan `type' builtin\n"
+"      -V\tmenampilkan lebih jelas deskripsi dari setiap PERINTAH\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan status keluar dari PERINTAH, atau gagal jika PERINTAH "
+"tidak ditemukan."
+
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"Menset nilai variabel dan atribut.\n"
+"    \n"
+"    Variabel deklarasi dan memberikan atribut untuknya. Jika tidak ada NAMA "
+"yang diberikan,\n"
+"    tampilkan atribut dan nilai dari seluruh variabel.\n"
+"    \n"
+"    Pilihan:\n"
+"      -f\tbatasi aksi atau tampilkan nama fungsi dan definisi\n"
+"      -F\tbatasi tampilan ke nama fungsi saja (tambahkan nomor baris dan\n"
+"    \tsumber berkas ketika debugging)\n"
+"      -p\ttampilkan atribut dan nilai dari setiap NAMA\n"
+"    \n"
+"    Pilihan yang menset atribut:\n"
+"      -a\tuntuk membuat NAMA idex array (jika didukung)\n"
+"      -A\tuntuk membuat NAMA assosiasi array (jika didukung)\n"
+"      -i\tuntuk membuat NAMA memiliki atribut `integer'\n"
+"      -l\tuntuk mengubah NAMA ke huruf kecil dalam assignment\n"
+"      -r\tuntuk membuah NAMA baca-saja\n"
+"      -u\tuntuk mengubah NAMA ke huruf besar dalam penempatan\n"
+"      -x\tuntuk membuah NAMA export\n"
+"    \n"
+"    Menggunakan `+' daripada `-' menonaktifkan atribut yang diberikan.\n"
+"    \n"
+"    Variabel dengan atribut integer memiliki evaluasi aritmetic (lihat\n"
+"    perintah `let') ditampilkan ketika variabel diberi sebuah nilai.\n"
+"    \n"
+"    Ketika digunakan dalam sebuah fungsi, `declare' membuat NAMA lokal, "
+"seperti dengan\n"
+"    perintah `local'.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecuali sebuah pilihan tidak valid diberikan atau "
+"sebuah error terjadi."
+
+#: builtins.c:532
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"Menset nilai variabel dan atribut.\n"
+"    \n"
+"    Kadaluarsa. Lihat `help declare'."
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Mendefinisikan variabel lokal.\n"
+"    \n"
+"    Membuat sebuah variabel locak dipanggil NAMA, dan memberikan kepadanya "
+"NILAI. OPSI dapat\n"
+"    berupa semua pilihan yang diterima oleh `declare'.\n"
+"    \n"
+"    Variabel lokal hanya dapat digunakan dalam sebuah fungsi; mereka hanya\n"
+"    dapat dilihat ke fungsi dimana mereka terdefinisi dan anaknya.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecuali sebuah pilihan tidak valid diberikan, "
+"sebuah error terjadi.\n"
+"    atau shell tidak menjalankan sebuah fungsi."
+
+#: builtins.c:557
+#, fuzzy
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Tulis argumen ke standar keluaran.\n"
+"    \n"
+"    Menampilkan ARG ke standar keluaran diikuti oleh baris baru.\n"
+"    \n"
+"    Pilihan:\n"
+"      -n\tjangan menambahkan sebuah baris baru\n"
+"      -e\taktifkan interpretasi dari karakter backslash\n"
+"      -E\tsecara eksplisit tekan interpretasi dari karakter backslash\n"
+"    \n"
+"    `echo' menginterpretasikan karakter backslash-escaped berikut:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress karakter baris baru yang tersisa\n"
+"      \\E\tescape karakter\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tkarakter yang memiliki kode ASCII NNN (oktal). NNN dapat "
+"berupa\n"
+"    \t0 sampai 3 oktal digit\n"
+"      \\xHH\tdelapan-bit karakter yang nilainya adalah HH (hexadesimal). HH\n"
+"    \tdapat satu dari dua bilangan hex\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecuali sebuah penulisan error terjadi."
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Menulis argumen ke standar output.\n"
+"    \n"
+"    Menampilkan ARG ke standard keluaran diikuti dengan sebuah baris baru.\n"
+"    \n"
+"    Pilihan:\n"
+"      -n\tjangan menambahkan sebuah baris baru\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecuali sebuah penulisan error terjadi."
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"Aktifkan dan non-aktifkan shell builtins.\n"
+"    \n"
+"    Aktifkan dan non-aktifkan perintah builtin shell. Menonaktifkan "
+"membolehkan anda untuk\n"
+"    menjalankan sebuah perintah disk yang memiliki nama yang sama dengan "
+"shell builtin\n"
+"    tanpa menggunakan sebuah nama jalur yang lengkap.\n"
+"    \n"
+"    Pilihan:\n"
+"      -a\ttampilkan daftar dari builtins memperlihatkan aktif atau tidak "
+"setiap diaktifkan\n"
+"      -n\tmenonaktifkan setiap NAMA atau tampilkan daftar dari builtin yang "
+"tidak aktif\n"
+"      -p\ttampilkan daftar dari builtins dalam format yang berguna\n"
+"      -s\ttampilkan yang nama dari Posix `special' builtins\n"
+"   \n"
+"   Pilihan mengontrol dynamic loading:\n"
+"      -f\tLoad builtin NAMA dari shared object NAMA BERKAS\n"
+"      -d\tHapus sebuah builtin diload dengan -f\n"
+"   \n"
+"   Tanpa pilihan, untuk setiap NAMA di aktifkan.\n"
+"   \n"
+"   Untuk menggunakan `test' ditemukan dalam $PATH daripada dalam shell "
+"builtin\n"
+"   versi, ketik `enable -n test'.\n"
+"   \n"
+"   Status Keluar:\n"
+"   Mengembalikan sukses kecuali NAMA bukan sebuah shell builtin atau sebuah "
+"error terjadi."
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Menjalankan argumen sebagai sebuah perintah shell.\n"
+"    \n"
+"    Mengkombinasikan ARG dalam sebuah string tunggal, gunakan hasil sebagai "
+"masukan dalam shell,\n"
+"    dan jalankan hasil dari perintah.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan status keluar dari perintah atau sukses jika perintah "
+"adalah kosong."
+
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"Ambil argumen pilihan.\n"
+"    \n"
+"    Getops digunakan oleh shell procedures untuk memparse parameter posisi.\n"
+"    \n"
+"    OPTSTRING berisi huruf pilihan yang dikenali; jika sebuah huruf\n"
+"    diikuti oleh sebuah colon, pilihan diduga akan berupa argumen,\n"
+"    yang seharusnya dipisahkan dari itu oleh spasi.\n"
+"    \n"
+"    Setiap waktu ini dipanggil, getopts akan menempatkan pilihan selanjutnya "
+"dalam\n"
+"    $name shell variabel, menginisialisasi nama jiki ini tidak ada, dan\n"
+"    index dari argumen selanjutnya untuk diproses kedalam shell\n"
+"    variabel OPTIND. OPTIND diinisialisasi ke 1 setiap shell atau\n"
+"    sebuah shell script dipanggil. Ketika sebuah pilihan membutuhkan sebuah "
+"argumen,\n"
+"    getopts menempatkan argumen itu kedalam variabel shell OPTARG.\n"
+"    \n"
+"    getopts melaporkan error dalam satu dari dua cara. Jika karakter "
+"pertama\n"
+"    dari OPTSTRING adalah sebuah colon, getopts menggunakan silent error "
+"laporan. Dalam\n"
+"    Mode ini, tidak ada pesan error yang ditampilkan. Jika sebuah pilihan "
+"tidak valid terlihat\n"
+"    getops menempatkan karakter pilihan yang ditemukan ke OPTARG. Jika "
+"sebuah\n"
+"    argumen yang dibutuhkan tidak ditemukan, getopts menempatkan sebuah ':' "
+"kedalam NAME dan\n"
+"    menset OPTARG ke pilihan karakter yang ditemukan. Jika getopts tidak "
+"dalam\n"
+"    mode silent, dan sebuah pilihan tidak valid terlihat getopts menempatkan "
+"'?' kedalam\n"
+"    variabel NAME, OPTARG tidak diset, dan sebuah pesan analisis\n"
+"    tampilkan.\n"
+"    \n"
+"    Jika sebuah variabel shell OPTERR memiliki sebuah nilai 0, getopts "
+"mendisable\n"
+"    pencetakan dari pesan error, bahkan jika karakter pertama dari\n"
+"    OPTSTRING bukan sebuah colon. OPTERR memiliki nilai 1 secara default.\n"
+"    \n"
+"    Getopts secara normal memparse parameter posisi ($0 - $9), tetapi jika\n"
+"    lebih dari satu argumen diberikan, mereka diparse.    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses jika sebuah pilihan ditemukan; gagal jika akhir "
+"dari pilihan\n"
+"    ditemui atau sebuah error terjadi."
+
+#: builtins.c:694
+#, fuzzy
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"Mengganti shell dengan perintah yang diberikan.\n"
+"    \n"
+"    Jalankan PERINTAH, ganti shell ini dengan aplikasi yang "
+"dispesifikaskan.\n"
+"    ARGUMEN menjadi argumen dari PERINTAH. Jika PERINTAH tidak "
+"dispesifikasikan,\n"
+"    setiap redireksi akan memiliki afek dalam shell sekarang.\n"
+"    \n"
+"    Pilihan:\n"
+"      -a nama\tlewatkan NAMA sebagai argumen ke nol ke PERINTAH\n"
+"      -c\t\tjalankan PERINTAH dengan sebuah environment kosong\n"
+"      -l\t\ttempatkan sebuah dash dalam argumen ke nol ke PERINTAH\n"
+"    \n"
+"    Jika perintah tidak dapat dijalankan, sebuah non-interaktif shell "
+"keluar, kecuali\n"
+"    pilihan shell `execfail' diset.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecuali PERINTAH tidak ditemukan atau sebuah "
+"redireksi error terjadi."
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Keluar dari shell.\n"
+"    \n"
+"    Keluar dari shell dengan status dari N. Jika N diabaikan, status "
+"keluaran\n"
+"    adalah status dari perintah terakhir yang dijalankan."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Keluar dari sebuah login shell.\n"
+"    \n"
+"    Keluar sebuah login shell dengan status keluar N. Mengembalikan sebuah "
+"error jika tidak dijalankan\n"
+"    dalam sebuah login shell."
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"Tampilkan atau jalankan perintah dari daftar sejarah.\n"
+"    \n"
+"    fc biasa digunakan untuk mendaftar atau mengubah dan menjalankan "
+"perintah dari daftar sejarah.\n"
+"    PERTAMA dan TERAKHIR dapat berupa nomor yang menspesifikasikan "
+"jangkauan, atau PERTAMA dapat berupa sebuah\n"
+"    string, yang berarti adalah perintah yang berawal dengan string.\n"
+"    \n"
+"    Pilihan:\n"
+"       -e ENAME\tmemilih editor yang akan digunakan. Default adalah FCEDIT, "
+"kemudian EDITOR,\n"
+"    \t\tkemudian vi.\n"
+"       -l \tdaftar baris daripada mengubahnya.\n"
+"       -n \tabaikan nomor baris ketika MENDAFTAR.\n"
+"       -r \tmembalik urutan dari baris (membuat yang terbaru terdaftar "
+"pertama).\n"
+"    \n"
+"    Dengan `fc -s [pat=rep ...] [perintah]' format, perintah\n"
+"    dijalankan setelah substitusi OLD=NEW dilakukan.\n"
+"    \n"
+"    Sebuah alias yang berguna yang digunakan dengan ini r='fc -s', jadi "
+"mengetikan `r cc'\n"
+"    menjalankan perintah terakhir yang diawali dengan `cc' dan mengetikan "
+"'r' menjalankan kembali\n"
+"    perintah terakhir.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses atau status dari perintah yang dijalankan; tidak-"
+"nol jika sebuah error terjadi."
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Pindahkan pekerjaan di foreground.\n"
+"    \n"
+"    Tempatkan JOB_SPEC di foreground, dan buat ini pekerjaan saat ini. Jika\n"
+"    JOB_SPEC tidak ada, shell notion dari pekerjaan saat ini\n"
+"    yang digunakan.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Status dari perintah yang ditempatkan di foreground, atau gagal jika "
+"sebuah error terjadi."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Pindahkan pekerjaan ke background.\n"
+"    \n"
+"    Tempatkan setiap JOB_SPEC dalam background, seperti jika ini telah "
+"dimulai dengan\n"
+"    `&'. Jika JOB_SPEC tidak ada, notion shell's dari pekerjaan\n"
+"    yang saat berjalan digunakan.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecuali pengontrol pekerjaan tidak aktif atau "
+"sebuah error terjadi."
+
+#: builtins.c:793
+#, fuzzy
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"Ingat atau tampilkan lokasi aplikasi.\n"
+"    \n"
+"    Tentukan dan ingat nama jalur lengkap dari setiap NAMA perintah. Jika\n"
+"    tidak ada argumen yang diberikan, informasi mengenai perintah yang "
+"diingat akan ditampilkan.\n"
+"    \n"
+"    Pilihan:\n"
+"      -d\t\tlupakan lokasi yang diingat untuk setiap NAMA\n"
+"      -l\t\ttampilkan dalam format yang bisa digunakan sebagai masukan\n"
+"      -p pathname\tgunakan NAMA JALUR yang nama jalur lengkap dari NAMA\n"
+"      -r\t\tlupakan semua lokasi yang diingat\n"
+"      -t\t\ttampilkan lokasi yang diingat untuk setiap NAMA, diawali\n"
+"   \t\tuntuk setiap lokasi diberikan NAMA yang sesuai jika multiple\n"
+"   \t\tNAMA diberikan\n"
+"   Argumen:\n"
+"      NAMA\t\tSetiap NAMA yang ditemukan dalam $PATH dan ditambahkan dalam "
+"daftar\n"
+"   \t\tdari perintah yang diingat.\n"
+"   \n"
+"   Status Keluar:\n"
+"   Mengembalikan sukses kecuali NAMA tidak ditemukan atau sebuah pilihan "
+"tidak valid telah diberikan."
+
+#: builtins.c:818
+#, fuzzy
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Tampilkan informasi mengenai perintah builtin.\n"
+"    \n"
+"    Tampilkan ringkasan singkat dari perintah builtin. Jika POLA\n"
+"    dispesifikasikan, tampilkan bantuan lengkap di seluruh perintah yang "
+"cocok dengan POLA,\n"
+"    jika tidak daftar dari topik bantuan ditampilkan.\n"
+"    \n"
+"    Pilihan:\n"
+"      -d\tkeluarkan deskripsi singkat untuk setiap topik\n"
+"      -m\ttampilkan penggunaan dalam format pseudo-manpage\n"
+"      -s\tkeluarkan hanya penggunaan singkat untuk setiap topik yang cocok\n"
+"    \tdengan POLA\n"
+"    \n"
+"    Argumen:\n"
+"      POLA\tPola menspesifikasikan topik bantuan\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecuali POLA tidak ditemukan atau pilihan tidak "
+"valid diberikan."
+
+#: builtins.c:842
+#, fuzzy
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Menampilkan atau memanipulasi daftar sejarah.\n"
+"    \n"
+"    Menampilkan daftar sejarah dengan nomor baris. Baris yang ditampilkan "
+"dengan\n"
+"    sebuah `*' telah diubah. Argumen dari N mengatakan untuk menampilkan "
+"hanya\n"
+"    N baris terakhir.\n"
+"    \n"
+"    Pilihan:\n"
+"      -c\tmenghapus daftar sejarah dengan cara menghapus seluruh masukan\n"
+"      -d menghapus masukan sejarah di offset OFFSET.\n"
+"    \n"
+"      -a\tmenambahkan ke daftar sejarah dari sesi ini ke berkas sejarah.\n"
+"      -n\tmembaca seluruh baris sejarah yang belum dibaca dari berkas "
+"sejarah\n"
+"      -r\tmembaca berkas sejarah dan menambahkan isinya ke daftar\n"
+"    \tsejarah\n"
+"      -w menulis sejarah sekarang ke berkas sejarah\n"
+"    \tdan menambahkannya kedalam daftar sejarah\n"
+"    \n"
+"      -p\tjalankan expansi sejarah untuk setiap ARG dan tampilkan hasilnya\n"
+"    \ttanpa menyimpannya kedalam daftar sejarah\n"
+"      -s\ttambahkan ARG ke daftar sejarah sebagai sebuah masukan tunggal\n"
+"    \n"
+"    \n"
+"    Jika NAMAFILE diberikan, maka itu digunakan sebagai berkas sejarah "
+"selain itu\n"
+"    jika $HISTFILE memiliki nilai, maka itu digunakan, selain itu ~/."
+"bash_history.\n"
+"    \n"
+"    \n"
+"    Jika variabel $HISTTIMEFORMAT diset dan tidak kosong, nilai ini yang "
+"akan digunakan\n"
+"    sebagai format untuk string untuk strftime(3) untuk mencetak timestamp "
+"yang berhubungan\n"
+"    dengan setiap masukan sejarah yang ditampilkan. Tidak ada time stamp "
+"yang ditampilkan jika tidak.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecuali sebuah pilihan tidak valid diberikan atau "
+"sebuah error terjadi."
+
+#: builtins.c:879
+#, fuzzy
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"Menampilkan status dari pekerjaan.\n"
+"    \n"
+"    Tampilkan pekerjaan yang aktif.  JOBSPEC membatasi keluaran ke pekerjaan "
+"itu.\n"
+"    Tanpa pilihan, status dari seluruh aktif job ditampilkan.\n"
+"    \n"
+"    Pilihan:\n"
+"      -l menampilkan daftar dari proses id sebagai informasi tambahan.\n"
+"      -n diberikan, hanya proses yang sudah berubah status saja sejak\n"
+"    \tnotifikasi terakhir yang ditampilkan.\n"
+"      -p hanya menampilkan proses id saja.\n"
+"      -r membatasi keluaran ke pekerjaan yang sedang jalan\n"
+"      -s membatasi keluaran ke pekerjaan yang berhenti\n"
+"    \n"
+"    Jika pilihan -x diberikan, PERINTAH dijalankan setelah semua spesifikasi "
+"pekerjaan\n"
+"    yang tampil di ARGS telah diganti dengan proses ID dari proses "
+"pekerjaan\n"
+"    grup leader.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecualis sebuah pilihan tidak valid diberikan atau "
+"sebuah error terjadi.\n"
+"    Jika -x digunakan, mengembalikan status keluar dari PERINTAH."
+
+#: builtins.c:906
+#, fuzzy
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"Hapus pekerjaan dari shell sekarang.\n"
+"    \n"
+"    Hapus setiap JOBSPEC argumen dari tabel dari pekerjaan aktif. Tanpa\n"
+"    JOBSPEC apapun, shell menggunakan indikasi ini dari pekerjaan sekarang.\n"
+"    \n"
+"    Pilihan:\n"
+"      -a\thapus seluruh pekerjaan jika JOBSPEC tidak diberikan\n"
+"      -h\ttandai setiap JOBSPEC sehingga SIGHUP tidak dikirim ke pekerjaan "
+"jika\n"
+"    \tshell menerima sebuah SIGHUP\n"
+"      -r\thapus hanya pekerjaan yang sedang berjalan\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecuali ada sebuah pilihan tidak valid atau JOBSPEC "
+"diberikan."
+
+#: builtins.c:925
+#, fuzzy
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Mengirim sebuah sinyal ke sebuah pekerjaan.\n"
+"    \n"
+"    Mengirim ke sebuah proses yang diidentifikasikan oleh PID atau JOBSPEC "
+"dengan sinyal yang diberi name\n"
+"    oleh SIGSPEC atau SIGNUM. Jika SIGSPEC atau SIGNUM tidak ada, maka\n"
+"    SIGTERM diasumsikan.\n"
+"    \n"
+"    Pilihan:\n"
+"      -s sig\tSIG adalah sebuah nama sinyal\n"
+"      -n sig\tSIG adalah sebuah nomor sinyal\n"
+"      -l\tdaftar dari nama sinyal; jika argumen diikuti dengan `-l' mereka "
+"mengasumsikan ke\n"
+"    \tnomor sinyal yang namanya ditampilkan.\n"
+"    Kill adalah sebuah shell builtin untuk dua alasan; ini membolehkan "
+"sebuah jobs ID untuk digunakan dari pada\n"
+"    proses IDs, dan memperbolehkan proses untuk dimatikan jika batas\n"
+"    dari proses yang dibuat tercapai.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecuali sebuah pilihan tidak valid diberikan atau "
+"sebuah error terjadi."
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"Evaluasi ekspresi arithmetic.\n"
+"    \n"
+"    Setiap ARG adalah sebuah ekspresi arithmetic yang dievaluasi. Evaluasi\n"
+"    dilakukan dalam fixed-width integers dengan tidak ada pemeriksaan untuk "
+"overflow, walaupun\n"
+"    pembagian dengan 0 ditangkap dan ditandai sebagai error. Berikut\n"
+"    daftar dari operator yang dikelompokkan dalam tingkat tingkat dari equal "
+"precedence operators.\n"
+"    Tingkat yang ditampilkan dalam urutan dari decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariabel post-increment, post-decrement\n"
+"    \t++id, --id\tvariabel pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical dan bitwise negasi\n"
+"    \t**\t\texponential\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+. -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shift\n"
+"    \t<=. >=, <, >\tperbandingan\n"
+"    \t==, !=\t\tpersamaan, dan ketidak samaan\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\toperator kondisional\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=. -=. <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Variabel shell dibolehkan sebagai operand. Nama dari variabel\n"
+"    digantikan oleh nilainya (coerced ke fixed-width integer) dalam\n"
+"    sebuah expresi. Variabel tidak butuh atribut integer\n"
+"    dinyalakan untuk digunakan dalam sebuah expresi.\n"
+"    \n"
+"    Operator yang dievaluasi dalam urutan precedence. Sub-expresi dalam\n"
+"    parentheses dievaluasi terlebih dahulu dan boleh dioverride precedence\n"
+"    aturan diatasnya.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Jika ARG terakhir dievaluasi ke 0, membiarkan kembali ke 1; 0 "
+"dikembalikan Jika tidak."
+
+#: builtins.c:994
+#, fuzzy
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"Membaca sebuah baris dari standar masukan dan membaginya dalam bagian "
+"bagian.\n"
+"    \n"
+"    Satu baris dibaca dari masukan standar, atau dari berkas deskripsi FD "
+"jika\n"
+"    pilihan -u diberikan, dan kata pertama diberikan ke NAMA pertama,\n"
+"    kata kedua ke NAMA kedua, dan seterusnya. dengan kata yang tersisa "
+"ditempatkan\n"
+"    ke NAMA terakhir. Hanya karakter yang ditemukan dalam $IFS yang dikenal "
+"sebagai pembatas\n"
+"    kata.\n"
+"   \n"
+"    Jika tidak ada NAMA yang diberikan, baris yang dibaca disimpan dalam "
+"variabel BALASAN\n"
+"    \n"
+"    Pilihan:\n"
+"      -a array\tditempatkan kata dibaca secara berurutan indice dari array\n"
+"    \t\tvariabel ARRAY, dimulai dari nol\n"
+"      -d delim\tdilanjutkan sampai karakter pertama dari PEMBATAS dibaca, "
+"daripada\n"
+"    \t\tbaris baru\n"
+"      -e\t\tgunakan Readline untuk memperoleh baris dalam sebuah shell "
+"interaktif\n"
+"      -i text\tGunakan TEXT sebagai text inisial untuk Readline\n"
+"      -n nchars\tkembali setelah membaca NCHARS characters daripada "
+"menunggu\n"
+"    \t\tuntuk sebuah baris baru\n"
+"      -N nchars\thanya kembali setelah membaca tepat NCHARS karakter, "
+"kecuali\n"
+"    \t\tEOF ditemui atau waktu habis dalam pembacaan, abaikan pembatas "
+"apapun\n"
+"      -p prompt\tkeluarkan string PROMPT tanpa tambahan baris baru sebelum\n"
+"    \t\tmencoba untuk membaca\n"
+"      -r\t\tjangan ijinkan backslash untuk mengeluarkan karakter apapun\n"
+"      -s\t\tjangan echo masukan yang datang dari sebuah terminal\n"
+"      -t menyebabkan pembacaan untuk time out dan kembali gagal jika sebuah "
+"baris lengkap\n"
+"    \t\tdari masukan tidak dibaca dalam TIMEOUT detik. Jika variabel TMOUT "
+"terset,\n"
+"    \t\tnilai ini akan menjadi nilai default timeout. TIMEOUT mungkin "
+"sebuah\n"
+"    \t\tbilangan fraksional. Status keluaran lebih besar dari 128 jika\n"
+"    \t\ttimeout dilewati\n"
+"      -u fd\t\tbaca dari berkas deskripsi FD daripada standar masukan\n"
+"    \n"
+"    Status Keluar:\n"
+"    Kode kembali adalah nol, kecuali akhir-dari-berkas ditemui, baca "
+"kehabisan waktu,\n"
+"    atau sebuah berkas deskripsi disupply sebagai sebuah argumen ke pilihan -"
+"u."
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"Kembali dari sebuah fungsi shell.\n"
+"    \n"
+"    Menyebabkan sebuah fungsi atau sebuah script untuk keluar dengan nilai "
+"kembali\n"
+"    yang dispesifikasikan oleh N. Jika N diabaikan, status kembalian adalah\n"
+"    perintah terakhir yang dijalankan dalam fungsi atau script.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan N, atau gagal jika shell tidak menjalan sebuah fungsi atau "
+"script."
+
+#: builtins.c:1054
+#, fuzzy
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"Set atau unset nilai dari pilihan shell dan parameter posisi.\n"
+"    \n"
+"    Ubah nilai dari atribut shell dan parameter posisi, atau\n"
+"    tampilkan nama dan nilai dari variabel shell.\n"
+"    \n"
+"    Pilihan:\n"
+"         -a Tandai variabel yang telah termodifikasi atau dibuat untuk "
+"export.\n"
+"         -b Notifikasi penyelesaian pekerjaan secara langsung.\n"
+"         -e Keluar langsung jika sebuah perintah keluar dengan status tidak "
+"nol.\n"
+"         -f Menonaktifkan pembuatan nama berkas (globbing).\n"
+"         -h Ingat lokasi dari perintah sebagai mereka dicari.\n"
+"         -k Semua argumen assignment ditempatkan dalam environment untuk "
+"sebuah\n"
+"            perintah, tidak hanya mengawali nama perintah.\n"
+"         -m Pengendali pekerjaan diaktifkan.\n"
+"         -n Baca perintah tapi jangan menjalankan perintah tersebut.\n"
+"         -o nama-pilihan\n"
+"            Set variabel menurut nama-pilihan:\n"
+"              allexport   sama seperti -a\n"
+"              braceexpand sama seperti -B\n"
+"              emacs       gunakan gaya emacs dalam line editing interface\n"
+"              errexit     sama seperti -e\n"
+"              errtrace    sama seperti -E\n"
+"              functrace   sama seperti -T\n"
+"              hashall     sama seperti -h\n"
+"              histexpand  sama seperti -H\n"
+"              history     aktifkan sejarah perintah\n"
+"              ignoreeof   shell tidak akan keluar ketika membaca EOF\n"
+"              interactive-comments\n"
+"                          membolehkan komentar ada dalam perintah "
+"interaktif\n"
+"              keyword     sama seperti -k\n"
+"              monitor     sama seperti -m\n"
+"              noclobber   sama seperti -C\n"
+"              noexec      sama seperti -n\n"
+"              noglob      sama seperti -f\n"
+"              nolog       saat ini diterima tetapi diabaikan\n"
+"              notify      sama seperti -b\n"
+"              nounset     sama seperti -u\n"
+"              onecmd      sama seperti -t\n"
+"              physical    sama seperti -P\n"
+"              pipefail    nilai kembalian dari sebuah pipelie adalah status "
+"dari\n"
+"                          perintah terakhir yang keluar dengan sebuah status "
+"tidak nol,\n"
+"                          atau nol jika tidak ada perintah yang keluar "
+"dengan status tidak nol\n"
+"              posix       ubah perilaku dari bash dimana operasi\n"
+"                          default berbeda dari 1003.2 standar ke\n"
+"                          sesuai dengan standar\n"
+"              privileged  sama seperti -p\n"
+"              verbose     sama seperti -v\n"
+"              vi          gunakan sebuah gaya vi dalam line editing "
+"interface.\n"
+"              xtrace      sama seperti -x\n"
+"         -p Aktif ketika real dan efektif id pengguna tidak cocok.\n"
+"            Menonaktifkan pemrosesan dari berkas $ENV dan mengimpor dari "
+"fungsi\n"
+"            shell. Mengubah pilihan ini off menyebabkan efektif uid dan\n"
+"            gid untuk diset ke real uid dan gid.\n"
+"         -t Keluar setelah  membaca dan menjalankan satu perintah.\n"
+"         -u Perlakukan variabel yang tidak diset sebagai error ketika "
+"mensubstitusi.\n"
+"         -v Tampilkan baris masukan shell seperti ketika dibaca.\n"
+"         -x Tampilkan perintah dan argumennya ketika menjalankan perintah "
+"tersebut.\n"
+"         -B Shell akan melakukan expansi brace\n"
+"         -C Jika diset, melarang berkas regular yang telah ada untuk "
+"ditulis\n"
+"            oleh keluaran redirection.\n"
+"         -E Jika diset, trap ERR diturunkan oleh fungsi shell.\n"
+"         -H Mengaktifkan ! gaya pengubahan sejarah.  Tanda ini aktif\n"
+"            secara default ketika shell interaktif.\n"
+"         -P Jika diset, jangan ikuti symbolic link ketika menjalankan "
+"perintah\n"
+"            seperti cd ketika mengubah direktori kerja sekarang.\n"
+"         -T Jika diset, Debug trap diturunkan oleh fungsi shell.\n"
+"         -  Assign argumen yang tersisa ke parameter posisi.\n"
+"            Pilihan -x dan -v akan dimatikan.\n"
+"    \n"
+"    Menggunakan + daripada - akan menyebabkan tanda untuk dimatikan. Tanda\n"
+"    juga bisa digunakan dalam pemanggilan shell. Tanda yang terset\n"
+"    saat ini dapat ditemukan dalam $-. ARG n yang tersisa adalah parameter\n"
+"    posisi dan ditempatkan, dalam urutan, ke $1, $2, ... $n. Jika tidak ada\n"
+"    ARG yang diberikan, semua shell variabel ditampilkan.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecuali sebuah pilihan tidak valid diberikan."
+
+#: builtins.c:1139
+#, fuzzy
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"Unset nilai dan atribut dari variabel shell dan fungsi.\n"
+"    \n"
+"    Untuk setiap NAMA, hapus variabel atau fungsi yang berhubungan.\n"
+"    \n"
+"    Pilihan:\n"
+"      -f\tperlakukan setiap NAMA sebagai sebuah fungsi shell\n"
+"      -v\tperlakukan setiap NAMA sebagai sebuah variabel shell\n"
+"    \n"
+"    Tanpa pilihan, unset pertama mencoba untuk menunset sebuah variabel, dan "
+"jika itu gagal,\n"
+"    mencoba untuk menunset sebuah fungsi.\n"
+"    \n"
+"    Beberapa variabel tidak dapat diunset; Lihat juga `readonly'.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecuali sebuah pilihan tidak valid diberikan atau "
+"sebuah NAMA adalah baca-saja."
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Set export atribut untuk variabel shell.\n"
+"    \n"
+"    Tandai setiap NAMA untuk otomatis export ke environment setelah\n"
+"    perintah dijalankan. Jika NILAI diberikan, berikan NILAI sebelum "
+"export.\n"
+"    \n"
+"    Pilihan:\n"
+"      -f\tmerujuk ke fungsi shell\n"
+"      -n\thapus properti export dari setiap NAMA\n"
+"      -p\ttampilkan daftar dari seluruh variabel dan fungsi yang terexport\n"
+"    \n"
+"    Sebuah argumen dari `--' menonaktifkan pemrosesan pilihan selanjutnya.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecuali sebuah pilihan tidak valid diberikan atau "
+"NAMA tidak valid."
+
+#: builtins.c:1180
+#, fuzzy
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Tandai variabel shell sebagai tidak bisa diubah.\n"
+"    \n"
+"    Tandai setiap NAMA sebagai baca-saja; nilai dari NAMA ini tidak boleh\n"
+"    diubah untuk penggunaan selanjutnya. Jika NILAI diberikan, berikan "
+"NILAI\n"
+"    sebelum menandainya sebagai baca-saja.\n"
+"    \n"
+"    Pilihan:\n"
+"      -a\tmerujuk ke aray index variabel\n"
+"      -A\tmerujuk ke variabel aray assosiasi\n"
+"      -f\tmerujuk ke fungsi shell\n"
+"      -p\tmenampilkan sebuah daftar dari seluruh variabel dan fungsi baca-"
+"saja\n"
+"    \n"
+"    Sebuah argumen dari `--' menonaktifkan pemrosesan pilihan selanjutnya.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecual sebuah pilihan tidak valid diberikan atau "
+"NAMA tidak valid."
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"Geser parameter posisi.\n"
+"    \n"
+"    Ubah nama parameter posisi $N+1,$N+2 ... ke $1,$2 ... Jika N\n"
+"    tidak diberikan, N diasumsikan 1.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecuali N adalah negatif atau lebih besar dari $#."
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Jalankan perintah dari sebuah berkas dalam shell sekarang.\n"
+"    \n"
+"    Baca dan jalankan perintah dari FILENAME dan kembali. Nama jalur dalam\n"
+"    $PATH digunakan untuk mencari direktori yang berisi NAMABERKAS. Jika "
+"salah satu\n"
+"    dari ARGUMENTS diberikan, mereka menjadi parameter posisi ketika\n"
+"    NAMABERKAS dijalankan.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan status dari perintah terakhir yang dijalankan dalam NAMA "
+"BERKAS; gagal jika\n"
+"    NAMA BERKAS tidak dapat dibaca."
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Suspend eksekusi shell.\n"
+"    \n"
+"    Suspend eksekusi dari shell ini sampai menerima sebuah sinyal SIGCONT.\n"
+"    Kecuali dipaksa, login shell tidak dapat disuspend.\n"
+"    \n"
+"    Pilihan:\n"
+"      -f\tpaksa untuk suspend, walaupun jika shell adalah sebuah login "
+"shell\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecuali pengontrol pekerjaan tidak aktif atau "
+"sebuah error terjadi."
+
+#: builtins.c:1261
+#, fuzzy
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"Evaluasi ekspresi kondisi.\n"
+"    \n"
+"    Keluar dengan sebuah status dari 0 (benar) atau 1 (salah) tergantung "
+"dari\n"
+"    evaluasi dari EXPR. Expresi dapat berupa unary atau binary. Unary\n"
+"    expresi sering digunakan untuk memeriksa status dari sebuah berkas.\n"
+"    Terdapat operator string juga, dan operator pembanding numerik.\n"
+"    \n"
+"    Operator berkas:\n"
+"    \n"
+"        -a BERKAS       Benar jika berkas ada.\n"
+"        -b BERKAS       Benar jika berkas berupa blok spesial.\n"
+"        -c BERKAS       Benar jika berkas adalah karakter spesial.\n"
+"        -d BERKAS       Benar jika berkas adalah sebuah direktori.\n"
+"        -e BERKAS       Benar jika berkas ada.\n"
+"        -f BERKAS       Benar jika berkas ada dan berupa sebuah berkas "
+"regular.\n"
+"        -g BERKAS       Benar jika berkas memiliki set-grup-id.\n"
+"        -h BERKAS       Benar jika berkas adalah symbolic link.\n"
+"        -L BERKAS       Benar jika berkas adalah symbolic link.\n"
+"        -k BERKAS       Benar jika berkas memiliki `sticky' bit diset.\n"
+"        -p BERKAS       Benar jika berkas adalah named pipe.\n"
+"        -r BERKAS       Benar jika berkas dapat dibaca oleh anda.\n"
+"        -s BERKAS       Benar jika berkas ada dan tidak kosong.\n"
+"        -S BERKAS       Benar jika berkas adalah socket.\n"
+"        -t FD           Benar jika FD dibuka dalam sebuah terminal.\n"
+"        -u BERKAS       Benar jika berkas memiliki set-user-id.\n"
+"        -w BERKAS       Benar jika berkas dapat ditulis oleh anda.\n"
+"        -x BERKAS       Benar jika berkas dapat dijalankan oleh anda.\n"
+"        -O BERKAS       Benar jika berkas secara efektif dimiliki oleh "
+"anda.\n"
+"        -G BERKAS       Benar jika berkas secara efektif dimiliki oleh grup "
+"anda.\n"
+"        -N BERKAS       Benar jika berkas telah dimodifikasi sejak terakhir  "
+"ini dibaca.\n"
+"      \n"
+"        FILE1 -nt FILE2 Benar jika file1 lebih baru dari file2 (menurut \n"
+"                        tanggal modifikasi).\n"
+"      \n"
+"        FILE1 -ot FILE2 Benar jika file1 lebih lama dari file2.\n"
+"      \n"
+"        FILE1 -ef FILE2 Benar jika file1 adalah hard link ke file2.\n"
+"      \n"
+"      String operators:\n"
+"      \n"
+"           -z STRING    Benar jika string kosong.\n"
+"      \n"
+"           -n STRING\n"
+"           STRING       Benar jika string tidak kosong.\n"
+"      \n"
+"           STRING1 = STRING2\n"
+"                        Benar jika string sama.\n"
+"           STRING1 != STRING2\n"
+"                        Benar jika string tidak sama.\n"
+"           STRING1 < STRING2\n"
+"                        Benar jika STRING1 sorts sebelum STRING2 "
+"lexicographically.\n"
+"           STRING1 > STRING2\n"
+"                        Benar jika STRING1 sorts sesudah STRING2 "
+"lexicographically.\n"
+"       \n"
+"       Operator lain:\n"
+"       \n"
+"         -o Pilihan        Benar jika pilihan shell OPSI diaktifkan.\n"
+"         ! EXPR         Benar jika expr salah.\n"
+"         EXPR1 -a EXPR2 Benar jika kedua expr1 dan expr2 adalah benar.\n"
+"         EXPR1 -o EXPR2 Benar jika salah satu dari expr1 atau expr2 adalah "
+"benar.\n"
+"       \n"
+"         arg1 OP arg2   Pemeriksaan arithmetik. OP adalah salah satu dari -"
+"eq, -ne,\n"
+"                        -lt, -le, -gt, atau -ge.\n"
+"       \n"
+"       Arithmetic binary operator mengembalikan benar jika ARG1 adalah "
+"equal, not-equal,\n"
+"       less-than, less-than-or-equal, greater-than, atau greater-than-or-"
+"equal\n"
+"       than ARG2.\n"
+"       \n"
+"       Status Keluar:\n"
+"       Mengembalikan sukses jika EKSPR mengevaluasi ke benar; gagal jika "
+"EXPR mengevaluasi ke\n"
+"       salah atau sebuah argumen tidak valid diberikan."
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Evaluasi expresi kondisional.\n"
+"    \n"
+"    Ini sinonim untuk \"test\" builtin, tetapi argumen terakhir\n"
+"    harus berupa sebuah literal `]', untuk mencocokan dengan pembukaan `['."
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Tampilkan waktu pemrosesan.\n"
+"    \n"
+"    Tampilkan akumulasi waktu penggunaan pengguna dan sistem untuk shell dan "
+"seluruh proses dari\n"
+"    anaknya.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Selalu sukses."
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"Tangkap sinyal dan even lainnya.\n"
+"    \n"
+"    Definisikan dan aktivasi handlers yang harus dijalankan ketika shell "
+"menerima sinyal\n"
+"    atau kondisi lain.\n"
+"    \n"
+"    ARG perintah dibaca dan dijalankan ketika shell menerima\n"
+"    sinyal SIGNAL_SPEC. Jika ARG tidak ada (dan sebuah sinyal SIGNAL_SPEC\n"
+"    diberikan) atau `-', setiap sinyal yang dispesifikasikan akan direset "
+"kenilai\n"
+"    original. Jika ARG adalah string kosong untuk setiap SIGNAL_SPEC "
+"diabaikan oleh\n"
+"    shell dan oleh perintah yang dipanggil.\n"
+"    \n"
+"    Jika sebuah SIGNAL_SPEC adalah EXIT(0) perintah ARG dijalankan pada saat "
+"keluar dari shell. Jika\n"
+"    sebuah SIGNAL_SPEC adalah DEBUG, ARG dijalankan setiap perintah "
+"sederhana.\n"
+"    \n"
+"    Jika tidak ada argumen yang diberikan, trap menampilkan daftar dari "
+"perintah yang berasosiasi\n"
+"    dengan setiap sinyal.\n"
+"    \n"
+"    Pilihan:\n"
+"      -l\tmenampilkan sebuah daftar dari nama sinyal dan nomor yang "
+"berhubungan\n"
+"      -p\tmenampilkan perintah trap yang berasosiasi dengan setiap "
+"SIGNAL_SPEC\n"
+"    \n"
+"    Setiap SIGNAL_SPEC yang ada di nama sinyal dalam <signal.h> atau nomor "
+"sinyal. Nama sinyal\n"
+"    adalah case insensitive dan SIG prefix adalah opsional. sebuah\n"
+"    sinyal dapat dikirim ke sebuah shell dengan \"kill -signal $$\".\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecuali sebuah SIGSPEC adalah tidak valid atau "
+"sebuah pilihan tidak valid diberikan."
+
+#: builtins.c:1400
+#, fuzzy
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"Tampilkan informasi tentang perintah yang diketik.\n"
+"    \n"
+"    Untuk setiap NAMA, indikasikan bagaimana ini akan diinterpretasikan jika "
+"digunakan sebagai sebuah\n"
+"    nama perintah.\n"
+"    \n"
+"    Pilihan:\n"
+"      -a\tmenampilkan seluruh lokasi yang berisi sebuah nama NAMA yang dapat "
+"dijalankan;\n"
+"    \tmeliputi aliases, builtins, dan fungsi, jika dan hanya jika\n"
+"    \tpilihan `-p' juga sedang tidak digunakan\n"
+"      -f\tmenekan pencarian fungsi shell\n"
+"      -P\tmemaksa sebuah JALUR pencarian untuk setiap NAMA, bahkan jika ini "
+"adalah sebuah alias,\n"
+"    \tbuiltin, atau fungsi, dan mengembalikan nama dari berkas disk\n"
+"    \tyang akan dijalankan\n"
+"      -p\tmengembalikan baik nama dari berkas disk yang akan dijalankan,\n"
+"    \tatau tidak sama sekali jika `type -t NAME' akan mengembalikan "
+"`berkas'.\n"
+"      -t\tkeluarkan sebuah kata tunggal yang merupakan salah satu dari "
+"`alias', `keyword',\n"
+"    \t`fungsi', `builtin', `berkas', atau `', jika NAMA adalah sebuah alias, "
+"shell\n"
+"    \treserved word, fungsi shell, builtin shell, berkas disk, atau\n"
+"    \ttidak ditemukan\n"
+"    \n"
+"    Argumen:\n"
+"      NAMA\tNama perintah yang akan diinterpretasikan.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses jika seluruh dari NAMA ditemukan; gagal jika ada "
+"yang tidak ditemukan."
+
+#: builtins.c:1431
+#, fuzzy
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Modifikasi batas sumber daya shell.\n"
+"    \n"
+"    memberikan kontrol terhadap sarana yang tersedia untuk proses\n"
+"    yang dimulai oleh shell, dalam sistem yang mengijinkan untuk kontrol "
+"tersebut.\n"
+"    \n"
+"    Pilihan:\n"
+"        -S\tgunakan `soft' batas sarana\n"
+"        -H\tgunakan `hard' batas sarana\n"
+"        -a\tsemua batas ditampilkan\n"
+"        -c\tukuram maksimum untuk berkas cores yang dibuat\n"
+"        -d\tukuran maksimum untuk sebuah proses data segment\n"
+"        -e\tprioritas antrian maksimum ('nice')\n"
+"        -f\tukuran maksimum berkas yang ditulis oleh shell dan anaknya\n"
+"        -l\tjumlah maksimum dari sinyal tertunda\n"
+"        -m\tukuran maksimum dari resident\n"
+"        -n\tjumlah maksimum dari berkas deskriptor yang terbuka\n"
+"        -p\tukuran pipe buffer\n"
+"        -q\tjumlah maksimum dari bytes dalam POSIX pesan antrian\n"
+"        -r\tprioritas maksimum dari real-time scheduling\n"
+"        -s\tukuran maksimum dari stack\n"
+"        -t\tjumlah maksimum dari waktu cpu dalam detik\n"
+"        -u\tjumlah maksimum dari proses pengguna\n"
+"        -v\tukuran dari memori virtual\n"
+"        -x\tjumlah maksimum dari berkas pengunci\n"
+"    \n"
+"    Jika BATAS diberikan, maka nilai baru yang dispesifikasikan untuk "
+"sarana;\n"
+"    nilai spesial LIMIT `soft', `hard', dan `unlimited' berarti untuk\n"
+"    soft limit saat ini, jika hard limit saat ini dan no limit, "
+"respectively.\n"
+"    Jika tidak, nilai sekarang dari sarana yang dispesifikasikan "
+"ditampilkan.\n"
+"    Jika tidak ada pilihan yang diberikan, maka -f diasumsikan.\n"
+"    \n"
+"    Nilai adalah dalam 1024-byte increments, kecuali untuk -t, yang berarti "
+"dalam detik\n"
+"    -p, yang berarti increment dalam 512 bytes, dan -u, yang berarti "
+"unscaled dari\n"
+"    jumlah proses.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecuali sebuah pilihan tidak valid diberikan atau "
+"sebuah error terjadi."
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"Tampilkan atau set mask mode dari berkas.\n"
+"    \n"
+"    Set pembuatan berkas pengguna mask dengan MODE. Jika MODE diabaikan, "
+"tampilkan\n"
+"    nilai dari mask sekarang.\n"
+"    \n"
+"    Jika MODE diawali dengan sebuah digit, ini diinterpretasikan sebagai "
+"sebuah bilangan oktal;\n"
+"    jika tidak ini adalah sebuah mode simbolik seperti yang diterima oleh "
+"chmod(1).\n"
+"    \n"
+"    Pilihan:\n"
+"      -p\tjika MODE diabaikan, keluarkan dalam sebuah format yang bisa "
+"digunakan sebagai masukan\n"
+"      -S\tmembuat keluaran simbolik; jika tidak sebuah bilangan oktal adalah "
+"keluarannya\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecuali MODE tidak valid atau sebuah pilihan tidak "
+"valid diberikan."
+
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"Tunggu untuk penyelesaian pekerjaan dan kembalikan status keluar.\n"
+"    \n"
+"    Tunggu untuk proses yang diidentifikasikan oleh ID, yang mungkin sebuah "
+"proses ID atau sebuah\n"
+"    spesifikasi pekerjaan, dan laporkan status selesainya. Jika ID tidak\n"
+"    diberikan, tunggu untuk seluruh proses anak yang aktif, dan status "
+"kembalian\n"
+"    adalah nol. Jika ID adalah sebuah spesifikasi pekerjaan, tunggu untuk "
+"seluruh proses\n"
+"    dalam pipeline pekerjaan.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan status dari ID; gagal jika ID tidak valid atau sebuah "
+"pilihan tidak\n"
+"    valid diberikan."
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"Tunggu untuk penyelesaian proses dan kembalikan status keluar.\n"
+"    \n"
+"    Tunggu untuk proses yang dispesifikasikan dan laporkan status "
+"selesainya. Jika\n"
+"    PID tidak diberikan, maka semua aktif proses anak ditunggu,\n"
+"    dan kode kembalian adalah nol. PID dapat berupa proses ID.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan status dari ID; gagal jika ID tidak valid atau sebuah "
+"pilihan tidak valid\n"
+"    diberikan."
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Jalankan perintah untuk setiap anggota dalam sebuah daftar.\n"
+"    \n"
+"    `for' loop menjalankan urutan dari perintah untuk setiap anggota dalam "
+"sebuah\n"
+"    daftar dari items. Jika `in KATA ...;' tidak ada, maka `in \"$@\"' yang\n"
+"    menjadi asumsi. Untuk setiap elemen dalam KATA, NAMA di set untuk elemen "
+"tersebut, dan\n"
+"    PERINTAH dijalankan.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan status dari perintah terakhir yang dijalankan."
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Arithmetic untuk loop.\n"
+"    \n"
+"    Sama dengan\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tPERINTAH\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, dan EXP3 adalah expresi arithmetic. Jika setiap expresi\n"
+"    diabaikan, ini berjalan seperti jika dievaluasi ke 1.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan status dari perintah terakhir yang dijalankan."
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Pilih kata dari sebuah daftar dan jalankan perintah.\n"
+"    \n"
+"    WORDS diexpand, menghasilkan daftar dari kata.\n"
+"    set dari kata yang diexpand ditampilkan dalam standar error, setiap\n"
+"    keluaran diawali dengan sebuah nomor. Jika `in WORDS' tidak ada, `in \"$@"
+"\"'\n"
+"    diasumsikan. Kemudian PS3 prompt ditampilkan dan sebuah baris dibaca\n"
+"    dari standar masukan. Jika baris berisi dari nomor yang\n"
+"    berhubungan dengan salah sata kata yang ditampilkan, maka NAMA diset\n"
+"    ke WORD tersebut. Jika baris kosong, WORDS dan prompt\n"
+"    ditampilkan kembali. Jika EOF dibaca, perintah selesai. Baris yang "
+"dibaca disimpan\n"
+"    dalam variabel REPLY. PERINTAH dijalankan setelah setiap seleksi\n"
+"    sampai perintah break dijalankan.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan status dari perintah terakhir yang dijalankan."
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"Melaporkan waktu yang dihabiskan dalam menjalan eksekusi pipeline.\n"
+"    \n"
+"    Jalankan PIPELINE dan tampilkan ringkasan dari real time, user CPU "
+"time,\n"
+"    dan sistem CPU time yang dihabiskan dalam menjalankan PIPELINE ketika "
+"ini selesai.\n"
+"    \n"
+"    Pilihan:\n"
+"      -p\tmenampilkan ringkasan waktu dalam format portable Posix\n"
+"    \n"
+"    Status Keluar:\n"
+"    Status kembali adalah status kembali dari PIPELINE."
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Menjalankan perintah berdasarkan pencocokan pola.\n"
+"    \n"
+"    Secara selektif menjalankan PERINTAH berdasarkan dari KATA yang cocok "
+"dengan POLA.\n"
+"    `|' digunakan untuk memisahkan beberapa pola.    \n"
+"    Status Keluar:\n"
+"    Mengembalikan setatus dari perintah terakhir yang dijalankan."
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Menjalankan perintah berdasarkan kondisi.\n"
+"    \n"
+"    Daftar `if PERINTAH' dijalankan. Jika ini memberikan status keluaran "
+"nol, maka\n"
+"    daftar `then PERINTAH' dijalankan. Jika tidak, setiap daftar dari `elif "
+"PERINTAH'    \n"
+"    dijalankan satu satu, dan jika ini memberikan status keluaran nol, untuk "
+"setiap\n"
+"    daftar dari `then PERINTAH' yang dijalankan maka perintah `if' selesai. "
+"Jika tidak,\n"
+"    daftar `else PERINTAH' dijalankan, jika ada. Status keluaran dari    \n"
+"    seluruh construct adalah status keluaran dari perintah terakhir yang "
+"dijalankan, atau nol\n"
+"    jika tidak ada kondisi yang diperiksa benar.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan status dari perintah terakhir yang dijalankan."
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Menjalankan perintah sepanjang pemeriksaan sukses.\n"
+"    \n"
+"    Expand dan jalankan PERINTAH sepanjang akhir perintah dari\n"
+"    PERINTAH `while' telah memberikan status keluaran nol.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan status dari perintah terakhir yang dijalankan."
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Menjalankan perintah sepanjang pemeriksaan tidak sukses.\n"
+"    \n"
+"    Expand dan jalankan PERINTAH sepanjang akhir perintah dari\n"
+"    PERINTAH `until' telah memberikan status keluaran bukan nol.    \n"
+"    Status Keluar:\n"
+"    Mengembalikan status dari perintah terakhir yang dijalankan."
+
+#: builtins.c:1671
+#, fuzzy
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"Buat sebuah koproses dengan nama NAMA.\n"
+"    \n"
+"    Jalankan PERINTAH secara tidak sinkron, dengan standar keluaran dan\n"
+"    standar masukan dari perintah terhubung melalui sebuah pipa berkas\n"
+"    pipa deskripsi yang ditandai dengan 0 dan 1 dari sebuah susunan NAMA\n"
+"    variabel dalam shell yang dijalankan.\n"
+"    Nama baku adalah \"COPROC\".\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan status keluar dari PERINTAH."
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"Definisikan fungsi shell.\n"
+"    \n"
+"    Buat sebuah fungsi shell dengan nama NAMA. Ketika dipanggil sebagai "
+"sebuah perintah sederhana,\n"
+"    NAMA menjalankan PERINTAH dalam context shell pemanggil. Ketika NAMA "
+"dipanggil,\n"
+"    argumen dilewatkan ke fungsi sebagai $1...$n, dan nama fungsi\n"
+"    dalam $FUNCNAME.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecuali NAMA adalah baca-saja."
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Grup perintah sebagai sebuah unit.\n"
+"    \n"
+"    Jalankan sebuah set dari perintah dalam grup. Ini adalah salah satu cara "
+"untuk meredirect\n"
+"    seluruh set dari perintah.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan status dari perintah terakhir yang dieksekusi."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"Melanjutkan pekerjaan dalam foreground.\n"
+"    \n"
+"    Sama dengan JOB_SPEC argumen untuk perintah `fg'. Melanjutkan sebuah\n"
+"    pekerjaan yang telah berhenti atau menjadi background. JOB_SPEC dapat "
+"dispesifikasikan dengan nama job\n"
+"    atau nomor job. JOB_SPEC diikuti dengan sebuah `&' menempatkan job "
+"dalam\n"
+"    background, seperti dalam spesifikasi pekerjaan yang telah "
+"dispesifikasikan sebagai sebuah\n"
+"    argumen untuk `bg'.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan status dari pekerjaan yang dilanjutkan."
+
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Evaluasi ekspresi arithmetic.\n"
+"    \n"
+"    EXPRESI dievaluasi berdasarkan dalam aturan evaluasi\n"
+"    arithmetic. Sama dengan \"let EXPRESI\".\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan 1 jika EXPRESI dievaluasi ke 0; mengembalikan 0 jika tidak."
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"Menjalankan perintah kondisional.\n"
+"    \n"
+"    Mengembalikan sebuah status dari 0 atau 1 tergantung dari evaluasi dari\n"
+"    kondisi expresi EXPRESI. Expresi disusun dari primari yang sama dari "
+"yang digunakan\n"
+"    oleh `test' builtin, dan boleh dikombinasikan dengan menggunakan "
+"operator berikut\n"
+"    \n"
+"      ( EXPRESI )\tMengembalikan nilai dari EXPRESI\n"
+"      ! EXPRESI\t\tBenar jika kedua EXPR1 dan EXPR2 adalah benar; selain itu "
+"salah\n"
+"      EXPR1 && EXPR2\tBenar jika kedua EXPR1 dan EXPR2 adalah benar; selain "
+"itu salah\n"
+"      EXPR1 || EXPR2\tBenar jika salah satu EXPR1 atau EXPR2 adalah benar; "
+"selain itu salah\n"
+"    \n"
+"    Ketika operator `==' dan `!=' digunakan, string yang disebelah kanan "
+"dari     \n"
+"    operator yang digunakan sebagai sebuah pola dan pencocokan pola "
+"dilakukan.\n"
+"    Ketika operator `=~' digunakan, string yang dikanan dari operator\n"
+"    dicocokan sebagai sebuah ekspresi regular.\n"
+"    \n"
+"    Operator && dan || tidak mengevaluasi EXPR2 jika EXPR1 tidak mencukupi "
+"untuk\n"
+"    menentukan nilai dari expresi.\n"
+"    \n"
+"    Status Keluar:\n"
+"    0 atau 1 tergantun dari nilai dari EKSPRESI."
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"Nama variabel shell umum dan penggunaannya.\n"
+"    \n"
+"    BASH_VERSION\tInformasi versi dari Bash ini.\n"
+"    CDPATH\tSebuah daftar yang dipisahkan oleh titik dua dari direktori "
+"untuk mencari\n"
+"    \t\tdirektori yang diberikan sebagai argumen untuk `cd'.\n"
+"    GLOBIGNORE\tSebuah daftar pola yang dipisahkan dengan titik dua "
+"menjelaskan nama berkas yang\n"
+"    \t\tdiabaikan oleh pathname expansion.\n"
+"    HISTFILE\tNama dari berkas dimana sejara perintah anda disimpan.\n"
+"    HISTFILESIZE\tJumlah maksimum dari baris dimana berkas ini berisi.\n"
+"    HISTSIZE\tJumlah maksimum dari baris sejarah yang sedang berjalan\n"
+"    \t\tketika shell sedang menaksesnya.\n"
+"    HOME\tNama jalur lengkap ke direktori login anda.\n"
+"    HOSTNAME\tNama dari host saat ini.\n"
+"    HOSTTYPE\tTipe dari CPU dari veri Bash yang sedang berjalan.\n"
+"    IGNOREEOF\tKendalikan aksi dari shell ketika menerima sebuah EOF\n"
+"    \t\tkarakter sebagai masukan. Jika diset, maka nilai\n"
+"    \t\tdari jumlah karakter EOF yang bisa diterima\n"
+"    \t\tdalam sebuah baris dalam baris kosong sebelum shell keluar\n"
+"    \t\t(default 10). Ketika diunset, EOF menandakan akhir dari masukan.\n"
+"    MACHTYPE\tSebuah kata yang menjelaskan system yang berjalan ketika Bash "
+"berjalan.\n"
+"    MAILCHECK\tSeberapa sering, dalam detik, Bash memeriksa pesan baru.\n"
+"    MAILPATH\tDaftar dari nama berkas yang dipisahkan oleh titik-dua dimana "
+"Bash memeriksa\n"
+"    \t\tpesan baru.\n"
+"    OSTYPE\tVersi Unix dari Versi Bash yang sedang berjalan.\n"
+"    PATH\tDaftar direktori yang dipisahkan oleh titik-dua untuk mencari "
+"ketika\n"
+"    \t\tmencari perintah.\n"
+"    PROMPT_COMMAND\tSebuah perintah yang dijalankan sebelum menampilkan "
+"setiap\n"
+"    \t\tmasukan utama.\n"
+"    PS1\t\tKata prompt utama.\n"
+"    PS2\t\tKata prompt kedua.\n"
+"    PWD\t\tNama jalur lengkat dari direktori sekarang.\n"
+"    SHELLOPTS\tDaftar dari shell pilihan yang dipisahkan oleh titik-dua.\n"
+"    TERM\tNama dari tipe terminal sekarang.\n"
+"    TIMEFORMAT\tFormat keluaran dari statistik waktu yang ditampilkan oleh\n"
+"    \t\t`time' kata yang direserved.\n"
+"    auto_resume\tTidak kosong berarti sebuah kata perintah akan munncul di "
+"sebuah baris dengan\n"
+"    \t\tsendirinya adalah pertama dicari dalam daftar dari\n"
+"    \t\tpekerjaan yang terhenti sekarang. Jika ditemukan disana, maka "
+"pekerjaan intu di foregroundkan.\n"
+"    \t\tNila dari  `exact' berarti kata perintah harus\n"
+"    \t\tcocok secara tepat dalam daftar  dari pekerjaan yang terhenti. "
+"Sebuah\n"
+"    \t\tNila dari `substring' berarti bahwa kata perintah harus cocok\n"
+"    \t\tdengan substring dari pekerjaan. Nilai yang lain berarti\n"
+"    \t\tperintah harus diawali dari sebuah pekerjaan yang terhenti.\n"
+"    histchars\tKarakter pengendali history expansion dan pensubstitusi\n"
+"    \t\tcepat. Karakter pertama adalah karakter\n"
+"    \t\tpengganti sejarah, biasanya `!'. Karakter kedua\n"
+"    \t\tdari `quick substitution', biasanya `^'. Karakter\n"
+"    \t\tketiga adalah karakter `history comment'. biasanya `#',\n"
+"    HISTIGNORE\tSebuah daftar pola yang dipisahkan oleh titik dua yang "
+"digunakan untuk menentukan dimana\n"
+"    \t\tperintah seharusnya disimpan dalam daftar sejarah.\n"
+
+#: builtins.c:1821
+#, fuzzy
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Menambahkan direktori ke stack.\n"
+"    \n"
+"    Menambahkan sebuah direktori ke top dari direktori stack, atau merotasi\n"
+"    stack, membuah top baru dari stack dari working direktori saat ini.\n"
+"    Tanpa argumen, menukar top dari dua direktori.\n"
+"    \n"
+"    Pilihan:\n"
+"    -n\tmenekan perubahan normal dari direktori ketika menambahkan "
+"direktori\n"
+"    \tke stack, jadi hanya stack yang dimanipulasi.\n"
+"    \n"
+"    Argumen:\n"
+"    +N\tMerotasi stack sehingga direktori ke N (dihitung\n"
+"    \tdari kiri dari daftar yang terlihat oleh `dirs', dimulai dengan\n"
+"    \tnol) adalah di top.\n"
+"    \n"
+"    -N\tMerotasi stack sehingga direktori ke N (dihitung\n"
+"    \tdari kanan dari daftar yang terliha oleh `dirs', dimulai dengan\n"
+"    \tnol) adalah di top.\n"
+"    \n"
+"    dir\tenambahkan DIR ke direktori stack di puncak, membuatnya\n"
+"    \tdirektori kerja sekarang.\n"
+"    \n"
+"    Builtin `dirs' menampilkan direktori stack.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecuali ada sebuah argumen tidak valid diberikan "
+"atau pemindahan\n"
+"    direktori gagal."
+
+#: builtins.c:1855
+#, fuzzy
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Hapus direktori dari stack.\n"
+"    \n"
+"    Manghapus masukan dalam direktori stack. Tanpa argumen,\n"
+"    menghapus top direktori dari stack, dan cd's ke top\n"
+"    direktori baru.\n"
+"    \n"
+"    Pilihan:\n"
+"      -n\tmenekan perubahan normal dari direktori ketika menghapus "
+"direktori\n"
+"    \tdari stack, jadi hanya stack yang dimanipulasi.\n"
+"    \n"
+"    Argumen:\n"
+"      +N\tmenghapus masukan ke N dihitung dari kiri dari daftar\n"
+"    \tyang ditampilkan oleh `dirs', dimulai dari nol. Sebagai contoh: `popd "
+"+0'\n"
+"    \tmenghapus direktori terakhir, `popd +1' sebelum terakhir.\n"
+"    \n"
+"      -N\tmenghapus masukan ke N dihitung dari kanan dari daftar\n"
+"    \tyang ditampilkan oleh `dirs', dimulai dari nol. Sebagai contoh: `popd "
+"-0'\n"
+"    \tmenghapus direktori terakhir, `popd -1' sebelum terakhir.\n"
+"    \n"
+"    Builtin `dirs' menampilkan direktori stack.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecuali ada sebuah argumen tidak valid diberikan "
+"atau pemindahan\n"
+"    direktori gagal."
+
+#: builtins.c:1885
+#, fuzzy
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Menampilkan direktori stack.\n"
+"    \n"
+"    Menampilkan daftar dari direktori yang diingat saat ini. Direktori\n"
+"    menemukan jalannya kedalam daftar dengan perintah `pushd'; anda dapat "
+"memperoleh\n"
+"    backup melalui daftar dengan perintah `popd'.\n"
+"    \n"
+"    Pilihan:\n"
+"      -c\tmenghapus direktori stack dengan menghapus seluruh elemen.\n"
+"      -l\tjangan menampilkan versi yang diawali tilde dari direktori yang "
+"relatif\n"
+"    \tke direktori rumah anda\n"
+"      -p\tmenampilkan direktori stack dengan satu masukan setiap baris\n"
+"      -v\tmenampilkan direktori stack dengan satu masukan setiap baris "
+"diawali\n"
+"    \tdengan posisinya dalam stack\n"
+"    Argumen:\n"
+"      +N\tmenampilkan masukan ke N dihitung dari kiri dari daftar yang "
+"ditampilkan oleh\n"
+"    \tdirs ketika dijalankan tanpa pilihan, dimulai dari nol.\n"
+"    \n"
+"      -N\tmenampilkan masukan ke N dihitung dari kanan dari daftar yang "
+"ditampilkan oleh\n"
+"    \tdirs ketika dijalankan tanpa pilihan, dimulai dari nol.    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecuali ada sebuah pilihan tidak valid diberikan "
+"atau sebuah error terjadi."
+
+#: builtins.c:1916
+#, fuzzy
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"Set dan unset pilihan shell.\n"
+"    \n"
+"    Ubah setting untuk setiap pilihan shell OPTNAME. Tanpa pilihan\n"
+"    argumen apapun, tampilkan daftar shell pilihan dengan sebuah indikasi\n"
+"    ya atau tidak setiap pilihan di set.\n"
+"    \n"
+"    Pilihan:\n"
+"      -o\tbatasi OPTNAME ke definisi untuk digunakan dengan `set -o'\n"
+"      -p\ttampilkan setiap pilihan shell dengan sebuah indikasi dari "
+"statusnya\n"
+"      -q\ttekan keluaran\n"
+"      -s\taktifkan (set) setiap OPTNAME\n"
+"      -u\tnonaktifkan (unset) setiap OPTNAME\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses jika OPTNAME diaktifkan; gagal jika sebuah pilihan "
+"tidak valid diberikan\n"
+"    atau OPTNAME dinonaktifkan."
+
+#: builtins.c:1937
+#, fuzzy
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"Format dan tampilkan ARGUMEN dalam kontrol dari FORMAT.\n"
+"    \n"
+"    Pilihan:\n"
+"      -v var\tkeluaran ditempatkan dalam sebuah nilai dari variabel\n"
+"    shell VAR daripada dikirimkan ke keluaran standar.\n"
+"    \n"
+"    FORMAT adalah sebuah karakter string yang berisi dari tiga tipe dari "
+"objects: plain\n"
+"    karakter, yang disalin secara sederhana dari keluaran standar, karakter "
+"escape\n"
+"    sequences yang mengubah dan menyalin keluaran standar, dan\n"
+"    spesifikasi format, yang selalu menampilkan  argumen\n"
+"    \n"
+"    Tambahan dari spesifikasi standar printf(1) formats dan\n"
+"    printf(3), printf menginterprestasikan:\n"
+"    \n"
+"      %b berarti untuk menexpand backslash escape sequences dalam argumen "
+"yang sesuai\n"
+"      %q berarti meng-quote argumen dalam sebuah cara yang dapat digunakan "
+"sebagai masukan shell.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecuali sebuah pilihan tidak valid diberikan atau "
+"sebuah penulisan atau penempatan\n"
+"    error terjadi."
+
+#: builtins.c:1971
+#, fuzzy
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Spesifikasikan bagaimana argumen akan diselesaikan oleh Readline.\n"
+"    \n"
+"    Untuk setiap NAMA, spesifikasikan bagaimana argumen akan diselesaikan. "
+"Jika tidak ada pilihan\n"
+"    yang diberikan, spesifikasi penyelesaian yang sudah ada akan ditampilkan "
+"dalam cara\n"
+"    yang diperbolehkan untuk digunakan sebagai masukan.\n"
+"    \n"
+"    Pilihan:\n"
+"      -p\ttampilkan spesifikasi penyelesaian yang telah ada dalam format "
+"yang berguna\n"
+"      -r\thapus sebuah spesifikasi penyelesaian untuk setiap NAMA, atau jika "
+"tidak ada\n"
+"    \tNAMA yang diberikan, seluruh spesifikasi penyelesaian\n"
+"      -D\taplikasikan pelengkapan dan aksi sebagai perintah baku tanpa "
+"pelengkapan\n"
+"    \tspesifik yang didefinisikan\n"
+"      -E\taplikasikan pelengkapan dan aksi ke perintah \"empty\" --\n"
+"    \tpelengkapan dilakukan di baris kosong\n"
+"    \n"
+"    Ketika penyelesaian dicoba, aksi yang dilakukan dalam urutan\n"
+"    huruf besar pilihan yang ditampilkan diatas.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecuali sebuah pilihan tidak valid diberikan atau "
+"sebuah error terjadi."
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Menampilkan kemungkinan penyelesaian tergantung dari pilihan.\n"
+"    \n"
+"    Ditujukan  untuk digunakan dari dalam sebuah fungsi shell yang "
+"menghasilkan kemungkinan untuk completions.\n"
+"    Jika argumen WORD opsional yang diberikan, cocok dengan WORD telah\n"
+"    dihasilkan.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecuali sebuah pilihan tidak valid diberikan atau "
+"sebuah error terjadi."
+
+#: builtins.c:2016
+#, fuzzy
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"Modifikasi atau tampilkan pilihan penyelesaian.\n"
+"    \n"
+"    Modifikasi pilihan penyelesaian untuk setiap NAMA, atau, jika tidaka ada "
+"NAMA yang diberikan,\n"
+"    penyelesaian mulai dijalankan. Jika tidak ada OPSI yang diberikan, "
+"tampilkan\n"
+"    pilihan penyelesaian untuk setiap NAMA atau spesifikasi penyelesaian "
+"sekarang.\n"
+"    \n"
+"    Pilihan:\n"
+"    \t-o option\tSet pilihan penyelesaian OPSI untuk setiap NAMA\n"
+"    \t-D\t\tUbah pilihan untuk perintah pelengkapan \"default\"\n"
+"    \t-E\t\tUbah pilihan untuk perintah pelengkapan \"empty\"\n"
+"    \n"
+"    Gunakan `+o' daripada `-o' matikan pilihan yang dispesifikasikan.\n"
+"    \n"
+"    Argumen:\n"
+"    \n"
+"    Setiap NAMA yang dirujuk dalam sebuah perintah untuk sebuah spesifikasi "
+"penyelesaian harus\n"
+"    sebelumnya telah didefinisikan dengan menggunakan builtin `complete'. "
+"Jika tidak ada NAMA\n"
+"    yang diberikan, compopt harus dipanggil oleh sebuah fungsi yang dibuat "
+"oleh penyelesaian sekarang,\n"
+"    dan pilihan untuk menjalankan penyelesaian sekarang\n"
+"    telah dimodifikasi.\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecuali sebuah pilihan tidak valid diberikan atau "
+"NAMA tidak memiliki\n"
+"    spesifikasi penyelesaian yang terdefinisi."
+
+#: builtins.c:2047
+#, fuzzy
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"Baca baris dari standar masukan kedalam sebuah susunan variabel.\n"
+"    \n"
+"    Baca baris dari standar masukan kedalam variabel array ARRAY, atau dari\n"
+"    berkas deskripsi FD jika pilihan -u diberikan. Variabel MAPFILE adalah\n"
+"    ARRAY baku.\n"
+"    \n"
+"    Pilihan:\n"
+"      -n count\tSalin di baris COUNT. Jika COUNT adalah 0, semua baris "
+"disalin.\n"
+"      -O origin\tAwal penempatan ke ARRAY di index ORIGIN. Indeks baku "
+"adalah 0.\n"
+"      -s count \tAbaikan baris COUNT pertama yang dibaca.\n"
+"      -t\t\tHapus sebuah akhiran baris baru dari setiap baris yang dibaca.\n"
+"      -u fd\t\tBaca baris dari berkas deskripsi FD daripada dari masukan "
+"standar.\n"
+"      -C callback\tEvaluasi CALLBACK untuk setiap waktu QUANTUM baris adalah "
+"baca.\n"
+"      -c quantum\tSpesifikasikan jumlah dari baris yang dibaca diantara "
+"setiap pemanggilan ke CALLBACK.\n"
+"    \n"
+"    Argumen:\n"
+"      ARRAY\t\tNama variabel array yang digunakan untuk berkas data.\n"
+"    \n"
+"    Jika -C Diberikan tanpa -c, default quantum adalah 5000. Ketika "
+"CALLBACK\n"
+"    dievaluasi , ini diberikan ke indeks dari element 'array' selanjutnya\n"
+"    untuk di-'assign' sebagai sebuah argumen tambahan.\n"
+"    \n"
+"    Jika tidak diberikan dengan asal secara eksplisit, berkas peta akan "
+"menghapus ARRAY sebelum\n"
+"    ditempatkan kepadanya\n"
+"    \n"
+"    Status Keluar:\n"
+"    Mengembalikan sukses kecuali sebuah pilihan tidak valid diberikan atau "
+"ARRAY adalah baca-saja."
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Baca baris dari sebuah berkas kedalam sebuah susunan variabel.\n"
+"    \n"
+"    Sebuah sinonim untuk `mapfile'."
+
+#, fuzzy
+#~ msgid "Copyright (C) 2019 Free Software Foundation, Inc."
+#~ msgstr "Hak Cipta (C) 2013 Free Software Foundation, Inc."
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "Mengembalikan konteks dari panggilan subroutine saat ini.\n"
+#~ "    \n"
+#~ "    Tanpa EXPR, kembali "
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process: process %5ld (%s) dalam the_pipeline"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "Sinyal tidak diketahui #"
+
+#~ msgid ":"
+#~ msgstr ":"
+
+#~ msgid "true"
+#~ msgstr "benar"
+
+#~ msgid "false"
+#~ msgstr "salah"
+
+#~ msgid "times"
+#~ msgstr "kali"
+
+#~ msgid ""
+#~ ".  With EXPR, returns\n"
+#~ "    "
+#~ msgstr ""
+#~ ".  Dengan EXPR, kembali\n"
+#~ "    "
+
+#~ msgid ""
+#~ "; this extra information can be used to\n"
+#~ "    provide a stack trace.\n"
+#~ "    \n"
+#~ "    The value of EXPR indicates how many call frames to go back before "
+#~ "the\n"
+#~ "    current one; the top frame is frame 0."
+#~ msgstr ""
+#~ "; informasi tambahan ini dapat digunakan untuk\n"
+#~ "    menyediakan penelusuran 'stack'.\n"
+#~ "    \n"
+#~ "    Nilai dari EXPR mengindikasikan berapa banyak panggilan 'frame' untuk "
+#~ "kembali\n"
+#~ "    sebelum saat ini; 'frame' paling atas adalah 'frame' 0."
+
+#~ msgid "Copyright (C) 2009 Free Software Foundation, Inc.\n"
+#~ msgstr "Hak Cipta (C) 2009 Free Software Foundation, Inc.\n"
+
+#~ msgid ""
+#~ "License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl."
+#~ "html>\n"
+#~ msgstr ""
+#~ "Lisensi GPLv2+: GNU GPL versi 2 atau sesudahnya <http://gnu.org/licenses/"
+#~ "gpl.html>\n"
+
+#~ msgid "xrealloc: cannot reallocate %lu bytes (%lu bytes allocated)"
+#~ msgstr ""
+#~ "xrealloc: tidak dapat menrealokasikan %lu bytes (%lu bytes teralokasikan)"
+
+#~ msgid "xrealloc: cannot allocate %lu bytes"
+#~ msgstr "xrealloc: tidak dapat mengalokasikan %lu bytes"
+
+#~ msgid "xrealloc: %s:%d: cannot reallocate %lu bytes (%lu bytes allocated)"
+#~ msgstr ""
+#~ "xrealloc: %s: %d: tidak dapat melakukan reallokasi %lu bytes (%lu bytes "
+#~ "teralokasi)"
+
+#~ msgid " "
+#~ msgstr " "
+
+#~ msgid "Without EXPR, returns returns \"$line $filename\".  With EXPR,"
+#~ msgstr ""
+#~ "Tanpa EXPR, mengembalikan kembalian \"$line $filename\". Dengan EXPR,"
+
+#~ msgid "returns \"$line $subroutine $filename\"; this extra information"
+#~ msgstr ""
+#~ "mengembalikan \"$line $subroutine $filename\"; informasi tambahan ini"
+
+#~ msgid "can be used used to provide a stack trace."
+#~ msgstr "dapat digunakan untuk menyediakan jejak sebuah stack."
+
+#~ msgid ""
+#~ "The value of EXPR indicates how many call frames to go back before the"
+#~ msgstr ""
+#~ "Nilai dari EXPR mengindikasikan berapa banyak call frames untuk kembali "
+#~ "sebelum"
+
+#~ msgid "current one; the top frame is frame 0."
+#~ msgstr "salah satu ini; top frame adalah frame 0."
+
+#~ msgid "%s: invalid number"
+#~ msgstr "%s: nomor invalid"
+
+#~ msgid "Shell commands matching keywords `"
+#~ msgstr "Perintah shell cocok dengan kata kunci `"
+
+#~ msgid "Display the list of currently remembered directories.  Directories"
+#~ msgstr "Tampilkan daftar dari direktori yang diingat sekarang. Direktori"
+
+#~ msgid "find their way onto the list with the `pushd' command; you can get"
+#~ msgstr ""
+#~ "menemukan jalannya sendiri kedalam daftar dengan perintah `pushd'; anda "
+#~ "dapat memperoleh"
+
+#~ msgid "back up through the list with the `popd' command."
+#~ msgstr "bantuan melalui daftar dari perintah `popd'."
+
+#~ msgid ""
+#~ "The -l flag specifies that `dirs' should not print shorthand versions"
+#~ msgstr ""
+#~ "Flag -l menspesifikasikan bahwa `dirs' seharusnya tidak menampilkan versi "
+#~ "pendek"
+
+#~ msgid ""
+#~ "of directories which are relative to your home directory.  This means"
+#~ msgstr "dari direktori yang relatif dari direktori home anda. Ini berarti"
+
+#~ msgid "that `~/bin' might be displayed as `/homes/bfox/bin'.  The -v flag"
+#~ msgstr ""
+#~ "bahwa `~/bin' mungkin ditampilkan sebagai `/homes/bfox/bin'. Pilihan -v"
+
+#~ msgid "causes `dirs' to print the directory stack with one entry per line,"
+#~ msgstr ""
+#~ "menyebabkan `dirs' ditampilkan di stack direktori dengan satu masukan per "
+#~ "baris,"
+
+#~ msgid ""
+#~ "prepending the directory name with its position in the stack.  The -p"
+#~ msgstr "mendahului nama direktori dengan posisinya dalam stack. Pilihan -p"
+
+#~ msgid "flag does the same thing, but the stack position is not prepended."
+#~ msgstr "melakukan hal yang sama, tetapi posisi stack tidak didahului."
+
+#~ msgid ""
+#~ "The -c flag clears the directory stack by deleting all of the elements."
+#~ msgstr ""
+#~ "Pilihan -c menghapus direktori stack dengan cara menghapus seluruh elemen."
+
+#~ msgid ""
+#~ "+N   displays the Nth entry counting from the left of the list shown by"
+#~ msgstr ""
+#~ "+N   menampilkan masukan ke N dihitung dari kiri dari daftar yang "
+#~ "ditampilkan oleh"
+
+#~ msgid "     dirs when invoked without options, starting with zero."
+#~ msgstr "     dirs ketika dipanggil tanpa pilihan, dimulai dengan nol."
+
+#~ msgid ""
+#~ "-N   displays the Nth entry counting from the right of the list shown by"
+#~ msgstr ""
+#~ "-N   menampilkan masukan ke N dihitung dari kanan dari daftar yang "
+#~ "ditampilkan dengan"
+
+#~ msgid "Adds a directory to the top of the directory stack, or rotates"
+#~ msgstr ""
+#~ "menambahkan sebuah direktori ke ujung atas dari direktori stack, atau "
+#~ "memutar"
+
+#~ msgid "the stack, making the new top of the stack the current working"
+#~ msgstr "stack, membuat sebuah top baru dari stack direktori yang dipakai"
+
+#~ msgid "directory.  With no arguments, exchanges the top two directories."
+#~ msgstr "saat ini. Tanpa argumen, menukar top dari dua direktori."
+
+#~ msgid "+N   Rotates the stack so that the Nth directory (counting"
+#~ msgstr "+N   Memutar stack sehingga direktori ke N (dihitung"
+
+#~ msgid "     from the left of the list shown by `dirs', starting with"
+#~ msgstr ""
+#~ "     dari kiri dari daftar yang ditampilkan oleh `dirs', dimulai dari"
+
+#~ msgid "     zero) is at the top."
+#~ msgstr "     nol) ini dilakukan di top."
+
+#~ msgid "-N   Rotates the stack so that the Nth directory (counting"
+#~ msgstr "-N   Memutar stact sehingga direktori ke N (dihitung"
+
+#~ msgid "     from the right of the list shown by `dirs', starting with"
+#~ msgstr ""
+#~ "     dari kanan dari daftar yang ditampilkan oleh `dirs', dimulai dengan"
+
+#~ msgid "-n   suppress the normal change of directory when adding directories"
+#~ msgstr ""
+#~ "-n   menekan perubahan normal dari direktori ketika menambahkan direktori"
+
+#~ msgid "     to the stack, so only the stack is manipulated."
+#~ msgstr "     ke stack, jadi hanya stack yang dimanipulasi."
+
+#~ msgid "dir  adds DIR to the directory stack at the top, making it the"
+#~ msgstr "dir  menambahkan DIR ke direktori stack di top, membuatnya "
+
+#~ msgid "     new current working directory."
+#~ msgstr "     menjadi direktori baru untuk bekerja."
+
+#~ msgid "You can see the directory stack with the `dirs' command."
+#~ msgstr "Anda dapat melihat direktori stack dengan perintah `dirs'."
+
+#~ msgid "Removes entries from the directory stack.  With no arguments,"
+#~ msgstr "Hapus masukan dari direktori stack. Tanpa argumen,"
+
+#~ msgid "removes the top directory from the stack, and cd's to the new"
+#~ msgstr "menghapus top direktori dari stack, dan pindah ke"
+
+#~ msgid "+N   removes the Nth entry counting from the left of the list"
+#~ msgstr "+N   menghapus masukan ke-N dihitung dari kiri dari daftar"
+
+#~ msgid "     shown by `dirs', starting with zero.  For example: `popd +0'"
+#~ msgstr "     yang terlihat oleh `dirs', dimulai dari nol. Contoh: `popd +0'"
+
+#~ msgid "     removes the first directory, `popd +1' the second."
+#~ msgstr "     menghapus direktori pertama, `popd +1' kedua."
+
+#~ msgid "-N   removes the Nth entry counting from the right of the list"
+#~ msgstr "-N   menghapus masukan ke N dihitung dari kanan dari daftar"
+
+#~ msgid "     shown by `dirs', starting with zero.  For example: `popd -0'"
+#~ msgstr "     yang terlihat oleh `dirs', dimulai dari nol. Contoh: `popd -0'"
+
+#~ msgid "     removes the last directory, `popd -1' the next to last."
+#~ msgstr ""
+#~ "     menghapus direktori terakhir, `popd -1' selanjutnya ke terakhir."
+
+#~ msgid ""
+#~ "-n   suppress the normal change of directory when removing directories"
+#~ msgstr ""
+#~ "-n   menekan perubahan normal dari direktori ketika menghapus direktori"
+
+#~ msgid "     from the stack, so only the stack is manipulated."
+#~ msgstr "     dari stack, sehingga hanya stack yang dimanipulasi."
+
+#~ msgid "allocated"
+#~ msgstr "teralokasi"
+
+#~ msgid "freed"
+#~ msgstr "terbebaskan"
+
+#~ msgid "requesting resize"
+#~ msgstr "meminta resize"
+
+#~ msgid "just resized"
+#~ msgstr "just resized"
+
+#~ msgid "bug: unknown operation"
+#~ msgstr "bug: operasi tidak diketahui"
+
+#~ msgid "malloc: watch alert: %p %s "
+#~ msgstr "malloc: watch alert: %p %s "
+
+#~ msgid ""
+#~ "Exit from within a FOR, WHILE or UNTIL loop.  If N is specified,\n"
+#~ "    break N levels."
+#~ msgstr ""
+#~ "Keluar dari dalam sebuah FOR, WHILE, atau UNTIL loop. jika N "
+#~ "dispesifikasikan,\n"
+#~ "    break N levels."
+
+#~ msgid ""
+#~ "Run a shell builtin.  This is useful when you wish to rename a\n"
+#~ "    shell builtin to be a function, but need the functionality of the\n"
+#~ "    builtin within the function itself."
+#~ msgstr ""
+#~ "Jalankan sebuah builtin shell. Ini akan  berguna ketika anda mengharapkan "
+#~ "untuk mengganti nama sebuah\n"
+#~ "    shell builting ke sebuah fungsi, tetapi membutuhkan sebuah "
+#~ "fungsionalitas dari\n"
+#~ "    sebuah fungsi builtin itu sendiri."
+
+#~ msgid ""
+#~ "Print the current working directory.  With the -P option, pwd prints\n"
+#~ "    the physical directory, without any symbolic links; the -L option\n"
+#~ "    makes pwd follow symbolic links."
+#~ msgstr ""
+#~ "Tampilkan direktori yang sedang digunakan saat ini. Dengan pilihan -P, "
+#~ "pwd menampilkan\n"
+#~ "    direktori physical, tanpa symbolic link yang lain; dengan pilihan -L\n"
+#~ "    membuat pwd mengikuti symbolic links."
+
+#~ msgid "Return a successful result."
+#~ msgstr "Mengembalikan sebuah kembalian yang sukses."
+
+#~ msgid ""
+#~ "Runs COMMAND with ARGS ignoring shell functions.  If you have a shell\n"
+#~ "    function called `ls', and you wish to call the command `ls', you can\n"
+#~ "    say \"command ls\".  If the -p option is given, a default value is "
+#~ "used\n"
+#~ "    for PATH that is guaranteed to find all of the standard utilities.  "
+#~ "If\n"
+#~ "    the -V or -v option is given, a string is printed describing "
+#~ "COMMAND.\n"
+#~ "    The -V option produces a more verbose description."
+#~ msgstr ""
+#~ "Menjalankan PERINTAH dengan ARGS mengabaikan fungsi shell. Jika anda "
+#~ "memiliki sebuah shell\n"
+#~ "    fungsi yang memanggil `ls', dan anda berharap untuk memanggil "
+#~ "perintah `ls', anda dapat\n"
+#~ "    mengatakan \"command ls\". Jika pilihan -p diberikan, sebuah nilai "
+#~ "default digunakan\n"
+#~ "    untuk PATH yang menjamin untuk mencari semua utilitis standar. Jika\n"
+#~ "    pilihan -V atau -v diberikan, sebuah string ditampilkan "
+#~ "mendeskripsikan PERINTAH.\n"
+#~ "    Pilihan -V menghasilkan deskripsi yang lebih detail."
+
+#~ msgid ""
+#~ "Declare variables and/or give them attributes.  If no NAMEs are\n"
+#~ "    given, then display the values of variables instead.  The -p option\n"
+#~ "    will display the attributes and values of each NAME.\n"
+#~ "    \n"
+#~ "    The flags are:\n"
+#~ "    \n"
+#~ "      -a\tto make NAMEs arrays (if supported)\n"
+#~ "      -f\tto select from among function names only\n"
+#~ "      -F\tto display function names (and line number and source file name "
+#~ "if\n"
+#~ "    \tdebugging) without definitions\n"
+#~ "      -i\tto make NAMEs have the `integer' attribute\n"
+#~ "      -r\tto make NAMEs readonly\n"
+#~ "      -t\tto make NAMEs have the `trace' attribute\n"
+#~ "      -x\tto make NAMEs export\n"
+#~ "    \n"
+#~ "    Variables with the integer attribute have arithmetic evaluation (see\n"
+#~ "    `let') done when the variable is assigned to.\n"
+#~ "    \n"
+#~ "    When displaying values of variables, -f displays a function's name\n"
+#~ "    and definition.  The -F option restricts the display to function\n"
+#~ "    name only.\n"
+#~ "    \n"
+#~ "    Using `+' instead of `-' turns off the given attribute instead.  "
+#~ "When\n"
+#~ "    used in a function, makes NAMEs local, as with the `local' command."
+#~ msgstr ""
+#~ "Declare variabel dan/atau memberikan atribut kepada mereka. Jika tidak "
+#~ "ada NAMA yang\n"
+#~ "    diberikan, maka menampilkan nilai dari variabel. Pilihan -p\n"
+#~ "    akan menampilkan atribut dan nilai dari setiap NAMA.\n"
+#~ "    \n"
+#~ "    Flags adalah:\n"
+#~ "    \n"
+#~ "      -a\tuntuk membuat aray NAMA (jika disupport)\n"
+#~ "      -f\tuntuk memilih dari nama fungsi saja\n"
+#~ "      -F\tuntuk menampilkan nama fungsi (dan nomor baris dan source nama "
+#~ "file jika\n"
+#~ "     \tdebugging) tanpa definisi\n"
+#~ "      -i\tuntuk membuat NAMA memiliki atribut `integer'\n"
+#~ "      -r\tuntuk membuat NAMA baca-saja\n"
+#~ "      -t\tuntuk membuat NAMA memiliki atribut `trace'\n"
+#~ "      -x\tuntuk membuat NAME export\n"
+#~ "     \n"
+#~ "     Variabel dengan atribut integer memiliki arithmetic evaluasi (lihat\n"
+#~ "     `let') selesai ketika variabel diberikan ke.\n"
+#~ "     \n"
+#~ "     Ketika menampilkan nilai dari variabel, -f menampilkan sebuah nama "
+#~ "fungsi\n"
+#~ "     dan definisi. Pilihan -F menekan untuk menampikan nama\n"
+#~ "     fungsi saja.\n"
+#~ "     \n"
+#~ "     Menggunakan `+' daripada `-' mematikan atribut yang diberikan. "
+#~ "Ketika\n"
+#~ "     sedang digunkan dalam sebuah fungsi, membuat NAMA lokal, seperti "
+#~ "dalam perintah 'local'."
+
+#~ msgid "Obsolete.  See `declare'."
+#~ msgstr "Kadaluarsa. Lihat `declare'."
+
+#~ msgid ""
+#~ "Create a local variable called NAME, and give it VALUE.  LOCAL\n"
+#~ "    can only be used within a function; it makes the variable NAME\n"
+#~ "    have a visible scope restricted to that function and its children."
+#~ msgstr ""
+#~ "Membuat sebuah variabel lokal yang disebut NAMA, dan menampilkan NILAI-"
+#~ "nya. LOKAL\n"
+#~ "    hanya dapat digunakan dalam sebuah fungsi; ini membuat NAMA variabel\n"
+#~ "    memiliki scope visibel terbatas untuk fungsi itu dan anaknya."
+
+#~ msgid ""
+#~ "Output the ARGs.  If -n is specified, the trailing newline is suppressed."
+#~ msgstr ""
+#~ "Keluaran dari ARGs. Jika pilihan -n dispesifikasikan, akhiran baris baru "
+#~ "dihapus."
+
+#~ msgid ""
+#~ "Enable and disable builtin shell commands.  This allows\n"
+#~ "    you to use a disk command which has the same name as a shell\n"
+#~ "    builtin without specifying a full pathname.  If -n is used, the\n"
+#~ "    NAMEs become disabled; otherwise NAMEs are enabled.  For example,\n"
+#~ "    to use the `test' found in $PATH instead of the shell builtin\n"
+#~ "    version, type `enable -n test'.  On systems supporting dynamic\n"
+#~ "    loading, the -f option may be used to load new builtins from the\n"
+#~ "    shared object FILENAME.  The -d option will delete a builtin\n"
+#~ "    previously loaded with -f.  If no non-option names are given, or\n"
+#~ "    the -p option is supplied, a list of builtins is printed.  The\n"
+#~ "    -a option means to print every builtin with an indication of whether\n"
+#~ "    or not it is enabled.  The -s option restricts the output to the "
+#~ "POSIX.2\n"
+#~ "    `special' builtins.  The -n option displays a list of all disabled "
+#~ "builtins."
+#~ msgstr ""
+#~ "Enable dan disable perintah builtin shell. Ini membolehkan\n"
+#~ "    anda untuk menggunakan perintah disk yang memiliki nama sama seperti "
+#~ "sebuah NAMA\n"
+#~ "    shell builtin tanpa menspesifikasikan sebuah pathname full. Jika "
+#~ "pilihan -n digunakan,\n"
+#~ "    NAMA menjadi disabled; jika tidak NAMA menjadi enabled. Contoh,\n"
+#~ "    gunakan `test' ditemukan dalam $PATH daripada dalam builtin versi\n"
+#~ "    builtin shell, ketik `enable -n test'. Di system mensupport dynamic\n"
+#~ "    loading, pilihan -f mungkin bisa digunakan untuk menload builtin baru "
+#~ "dari\n"
+#~ "    shared object NAMAFILE. Pilihan -d akan menghapus sebuah builting\n"
+#~ "    yang sebelumnya diload dengan pilihan -f. Jika tidak ada nama pilihan "
+#~ "yang diberikan, atau\n"
+#~ "    pilihan -p diberikan, daftar dari builtin ditampilkan.\n"
+#~ "    Pilihan -a berarti menampilkan setiap builtin dengan sebuah indikasi "
+#~ "apakah\n"
+#~ "    atau tidak ini enabled. Pilihan -s membatasi keluaran ke POSIX.2\n"
+#~ "    `special' builtins. Pilihan -n menampilkan daftar dari semua yang "
+#~ "builtins yang disabled."
+
+#~ msgid ""
+#~ "Read ARGs as input to the shell and execute the resulting command(s)."
+#~ msgstr ""
+#~ "Baca ARGs sebagai masukan ke shell dan jalankan untuk menghasilkan "
+#~ "perintah(s)."
+
+#~ msgid ""
+#~ "Exec FILE, replacing this shell with the specified program.\n"
+#~ "    If FILE is not specified, the redirections take effect in this\n"
+#~ "    shell.  If the first argument is `-l', then place a dash in the\n"
+#~ "    zeroth arg passed to FILE, as login does.  If the `-c' option\n"
+#~ "    is supplied, FILE is executed with a null environment.  The `-a'\n"
+#~ "    option means to make set argv[0] of the executed process to NAME.\n"
+#~ "    If the file cannot be executed and the shell is not interactive,\n"
+#~ "    then the shell exits, unless the shell option `execfail' is set."
+#~ msgstr ""
+#~ "Exec FILE, menimpa shell ini dengan aplikasi yang dispesifikasikan.\n"
+#~ "    Jika FILE tidak dispesifikasikan, redirectiions mengambil efek dalam\n"
+#~ "    shell ini. Jika argumen pertama adalah `-l', maka tempatkan sebuah "
+#~ "dash dalam\n"
+#~ "    argument ke nol yang dilewatkan ke FILE, seperti yang dilakukan oleh "
+#~ "login. Jika pilihan `-c'\n"
+#~ "    diberikan, FILE dijalankan dengan environmen kosong. Jika pilihan `-"
+#~ "a'\n"
+#~ "    berarti menset argv[0] dari proses yang dijalankan ke NAMA.\n"
+#~ "    Jika berkas tidak dapat dijalankan dan shell bukan interaktif,\n"
+#~ "    maka shell keluar, unless pilihan shell `execfail' diset."
+
+#~ msgid "Logout of a login shell."
+#~ msgstr "Logout dari sebuah login shell."
+
+#~ msgid ""
+#~ "For each NAME, the full pathname of the command is determined and\n"
+#~ "    remembered.  If the -p option is supplied, PATHNAME is used as the\n"
+#~ "    full pathname of NAME, and no path search is performed.  The -r\n"
+#~ "    option causes the shell to forget all remembered locations.  The -d\n"
+#~ "    option causes the shell to forget the remembered location of each "
+#~ "NAME.\n"
+#~ "    If the -t option is supplied the full pathname to which each NAME\n"
+#~ "    corresponds is printed.  If multiple NAME arguments are supplied "
+#~ "with\n"
+#~ "    -t, the NAME is printed before the hashed full pathname.  The -l "
+#~ "option\n"
+#~ "    causes output to be displayed in a format that may be reused as "
+#~ "input.\n"
+#~ "    If no arguments are given, information about remembered commands is "
+#~ "displayed."
+#~ msgstr ""
+#~ "Untuk setiap NAMA, full pathname dari perintah ditentukan dan\n"
+#~ "    diingat. Jika pilihan -p diberikan, PATHNAME digunakan sebagai\n"
+#~ "    full pathname dari NAME, dan tidak ada jalur pencarian yang "
+#~ "dilakukan. Pilihan -r\n"
+#~ "    menyebabkan shell untuk melupakan semua lokasi yang diingat. Pilihan -"
+#~ "d\n"
+#~ "    menyebabkan shell untuk melupakan lokasi dari setiap NAMA.\n"
+#~ "    Jika pilihan -t diberikan ful pathname ke setiap NAMA\n"
+#~ "    yang bersesuaian ditampilkan. Jika beberapa argumen NAMA diberikan "
+#~ "dengan\n"
+#~ "    pilihan -t, NAME ditampilkan sebelum hashed full pathname. Pilihan -"
+#~ "l\n"
+#~ "    menyebabkan keluaran untuk ditampilkan dalam format yang biasa "
+#~ "digunakan sebagai masukan.\n"
+#~ "    Jika tidak ada argumen yang diberikan, informasi mengenai perintah "
+#~ "yang diingat akan ditampilkan."
+
+#~ msgid ""
+#~ "Display helpful information about builtin commands.  If PATTERN is\n"
+#~ "    specified, gives detailed help on all commands matching PATTERN,\n"
+#~ "    otherwise a list of the builtins is printed.  The -s option\n"
+#~ "    restricts the output for each builtin command matching PATTERN to\n"
+#~ "    a short usage synopsis."
+#~ msgstr ""
+#~ "Menampilkan informasi yang berharga mengenai perintah builtin. Jika "
+#~ "PATTERN\n"
+#~ "    dispesifikasikan, memberikan bantuan detail mengenail seluruh "
+#~ "perintah yang cocok dengan PATTERN,\n"
+#~ "    jika tidak sebuah daftar dari builtings akan ditampilkan. Pilihan -s\n"
+#~ "    membatasi keluaran dari setiap perintah builtin yang cocok dengan "
+#~ "PATTERN ke\n"
+#~ "    ringkasan penggunaan singkat."
+
+#~ msgid ""
+#~ "By default, removes each JOBSPEC argument from the table of active jobs.\n"
+#~ "    If the -h option is given, the job is not removed from the table, but "
+#~ "is\n"
+#~ "    marked so that SIGHUP is not sent to the job if the shell receives a\n"
+#~ "    SIGHUP.  The -a option, when JOBSPEC is not supplied, means to remove "
+#~ "all\n"
+#~ "    jobs from the job table; the -r option means to remove only running "
+#~ "jobs."
+#~ msgstr ""
+#~ "Secara default, menghapus setiap JOBSPEC argumen dari tabel actif jobs.\n"
+#~ "    Jika pilihan -n diberikan, pekerjaan tidak dihapus dari tabel, tetap "
+#~ "ditandai\n"
+#~ "    sehingga ketika SIGHUP tidak terkirim ke job ketika shell menerima "
+#~ "sebuah\n"
+#~ "    SIGHUP. Pilihan -a, ketika JOBSPEC tidak diberikan, berarti menghapus "
+#~ "seluruh\n"
+#~ "    pekerjaan dari job tabel; Pilihan -r berarti hanya menghapus "
+#~ "pekerjaan yang berjalan."
+
+#~ msgid ""
+#~ "Causes a function to exit with the return value specified by N.  If N\n"
+#~ "    is omitted, the return status is that of the last command."
+#~ msgstr ""
+#~ "Menyebabkan sebuah fungsi untuk keluar dengan nilai kembalian "
+#~ "dispesifikasikan oleh N. Jika N\n"
+#~ "    diabaikan, maka status kembalian adalah status dari perintah terakhir."
+
+#~ msgid ""
+#~ "For each NAME, remove the corresponding variable or function.  Given\n"
+#~ "    the `-v', unset will only act on variables.  Given the `-f' flag,\n"
+#~ "    unset will only act on functions.  With neither flag, unset first\n"
+#~ "    tries to unset a variable, and if that fails, then tries to unset a\n"
+#~ "    function.  Some variables cannot be unset; also see readonly."
+#~ msgstr ""
+#~ "Untuk setiap NAMA, hapus variabel atau fungsi yang berhubungan. Dengan\n"
+#~ "    pilihan `-v', unset hanya berlaku di variabel. Dengan pilihan `-f',\n"
+#~ "    unset hanya berlaku untuk fungsi. Dengan tidak menggunakan dua "
+#~ "pilihan itu,\n"
+#~ "    pertama akan mencoba mengunset variabel, dan jika itu gagal maka "
+#~ "akan\n"
+#~ "    mencoba untuk mengunset sebuah fungsi. Beberapa variabel tidak dapat "
+#~ "diunset. Lihat readonly."
+
+#~ msgid ""
+#~ "NAMEs are marked for automatic export to the environment of\n"
+#~ "    subsequently executed commands.  If the -f option is given,\n"
+#~ "    the NAMEs refer to functions.  If no NAMEs are given, or if `-p'\n"
+#~ "    is given, a list of all names that are exported in this shell is\n"
+#~ "    printed.  An argument of `-n' says to remove the export property\n"
+#~ "    from subsequent NAMEs.  An argument of `--' disables further option\n"
+#~ "    processing."
+#~ msgstr ""
+#~ "NAMA ditandai untuk otomatis export ke environment dari\n"
+#~ "    perintah yang akan dijalankan selanjutnya. Jika pilihan -f "
+#~ "diberikan,\n"
+#~ "    NAMA akan menunjuk ke fungsi. Jika tidak ada NAMA diberikan, atau "
+#~ "jika pilihan `-p'\n"
+#~ "    diberikan, daftar dari seluruh nama yang diexport dalam shell ini\n"
+#~ "    ditampilkan. Sebuah argumen dari pilihan `-n' mengatakan untuk "
+#~ "menghapus expor properti\n"
+#~ "    dari NAMA selanjutnya. Sebuah argumen dari `--' menonaktifkan "
+#~ "pemrosesan\n"
+#~ "    pilihan selanjutnya."
+
+#~ msgid ""
+#~ "The given NAMEs are marked readonly and the values of these NAMEs may\n"
+#~ "    not be changed by subsequent assignment.  If the -f option is given,\n"
+#~ "    then functions corresponding to the NAMEs are so marked.  If no\n"
+#~ "    arguments are given, or if `-p' is given, a list of all readonly "
+#~ "names\n"
+#~ "    is printed.  The `-a' option means to treat each NAME as\n"
+#~ "    an array variable.  An argument of `--' disables further option\n"
+#~ "    processing."
+#~ msgstr ""
+#~ "NAMA yang diberikan ditandai secara baca-saja dan nilai dari NAMA ini "
+#~ "tidak\n"
+#~ "    boleh diubah oleh assignmen selanjutnya. Jika pilihan -f diberikan,\n"
+#~ "    maka fungsi yang berhubungan dengan NAMA akan ditandai. Jika tidak\n"
+#~ "    ada argumen yang diberikan, atau jika pilihan `-p' diberikan, sebuah "
+#~ "daftar dari seluruh nama baca-saja\n"
+#~ "    ditampilkan. Pilihan `-a' berarti memperlakukan setiap NAMA sebagai\n"
+#~ "    sebuah variabel array. Sebuah argumen dari `--' menonaktifkan "
+#~ "pemrosesan\n"
+#~ "    pilihan selanjutnya."
+
+#~ msgid ""
+#~ "The positional parameters from $N+1 ... are renamed to $1 ...  If N is\n"
+#~ "    not given, it is assumed to be 1."
+#~ msgstr ""
+#~ "Parameter posisi dari $N+1 ... diubah namanya menjadi $1 ... Jika N\n"
+#~ "    tidak diberikan, ini diasumsikan untuk menjadi 1."
+
+#~ msgid ""
+#~ "Suspend the execution of this shell until it receives a SIGCONT\n"
+#~ "    signal.  The `-f' if specified says not to complain about this\n"
+#~ "    being a login shell if it is; just suspend anyway."
+#~ msgstr ""
+#~ "Suspend eksekusi dari shell ini sampai ini menerima sebuah sinyal "
+#~ "SIGCONT\n"
+#~ "   Jika pilihan `-f' dispesifikasikan maka tidak komplain tentang ini "
+#~ "menjadi\n"
+#~ "   sebuah login shell jika emang begitu. Hanya lakukan suspend saja."
+
+#~ msgid ""
+#~ "Print the accumulated user and system times for processes run from\n"
+#~ "    the shell."
+#~ msgstr ""
+#~ "Tampilkan waktu yang terakumulasi oleh pengguna dan system untuk proses "
+#~ "yang berjalan dari\n"
+#~ "    shell."
+
+#~ msgid ""
+#~ "For each NAME, indicate how it would be interpreted if used as a\n"
+#~ "    command name.\n"
+#~ "    \n"
+#~ "    If the -t option is used, `type' outputs a single word which is one "
+#~ "of\n"
+#~ "    `alias', `keyword', `function', `builtin', `file' or `', if NAME is "
+#~ "an\n"
+#~ "    alias, shell reserved word, shell function, shell builtin, disk "
+#~ "file,\n"
+#~ "    or unfound, respectively.\n"
+#~ "    \n"
+#~ "    If the -p flag is used, `type' either returns the name of the disk\n"
+#~ "    file that would be executed, or nothing if `type -t NAME' would not\n"
+#~ "    return `file'.\n"
+#~ "    \n"
+#~ "    If the -a flag is used, `type' displays all of the places that "
+#~ "contain\n"
+#~ "    an executable named `file'.  This includes aliases, builtins, and\n"
+#~ "    functions, if and only if the -p flag is not also used.\n"
+#~ "    \n"
+#~ "    The -f flag suppresses shell function lookup.\n"
+#~ "    \n"
+#~ "    The -P flag forces a PATH search for each NAME, even if it is an "
+#~ "alias,\n"
+#~ "    builtin, or function, and returns the name of the disk file that "
+#~ "would\n"
+#~ "    be executed."
+#~ msgstr ""
+#~ "Untuk setiap NAMA, mengindikasikan bagaimana ini akan diinterpretasikan "
+#~ "jika digunakan sebagai sebuah\n"
+#~ "    nama perintah.\n"
+#~ "    \n"
+#~ "    Jika sebuah pilihan -t digunakan, `type' mengeluarkan sebuah kata "
+#~ "tunggal yang salah satu dari\n"
+#~ "    `alias', `keyword', `function', `builtin', `file', atau `', jika NAMA "
+#~ "adalah sebuah\n"
+#~ "    alias, shell kata yang dipesan, shell fungsi, shell builtin, disk "
+#~ "file,\n"
+#~ "    atau tidak ditemukan, respectively.\n"
+#~ "    \n"
+#~ "    Jika flag -p digunakan, `type' menampilkan semua dari tempat yang "
+#~ "berisi\n"
+#~ "    nama executable `file'. Ini meliputi aliases, builtings, dan\n"
+#~ "    fungsi, jika dan hanya jika flag -p juga tidak digunakan.\n"
+#~ "    \n"
+#~ "    Flag -f menekan seluruh fungsi shell lookup.\n"
+#~ "    \n"
+#~ "    Flag -P memaksa sebuah JALUR pencarian untuk setiap NAMA, bahkan jika "
+#~ "ini merupakan sebuah alias,\n"
+#~ "    builtin, atau fungsi, dan mengembalikan nama ke disk file yang akan\n"
+#~ "    dijalankan."
+
+#~ msgid ""
+#~ "The user file-creation mask is set to MODE.  If MODE is omitted, or if\n"
+#~ "    `-S' is supplied, the current value of the mask is printed.  The `-"
+#~ "S'\n"
+#~ "    option makes the output symbolic; otherwise an octal number is "
+#~ "output.\n"
+#~ "    If `-p' is supplied, and MODE is omitted, the output is in a form\n"
+#~ "    that may be used as input.  If MODE begins with a digit, it is\n"
+#~ "    interpreted as an octal number, otherwise it is a symbolic mode "
+#~ "string\n"
+#~ "    like that accepted by chmod(1)."
+#~ msgstr ""
+#~ "File-creation mask pengguna diset ke MODE. Jika MODE diabaikan, atau "
+#~ "jika\n"
+#~ "    `-S' diberikan, nilai sekaran dari mask ditampilkan. Pilihan `-S'\n"
+#~ "    membuah keluaran symbolic; jika tidak sebuah bilangan octal "
+#~ "dikeluarkan.\n"
+#~ "    Jika pilihan `-p' diberikan, dan MODE diabaikan, keluaran adalah "
+#~ "dalam format\n"
+#~ "    yang bisa digunakan sebagai masukan. Jika MODE dimulai dengan sebuah "
+#~ "digit, ini\n"
+#~ "    diinterpretasikan sebagai sebuah bilangan octal, jika tidak ini "
+#~ "adalah sebuah symbolic mode string\n"
+#~ "    yang diterima oleh chmod(1)."
+
+#~ msgid ""
+#~ "Wait for the specified process and report its termination status.  If\n"
+#~ "    N is not given, all currently active child processes are waited for,\n"
+#~ "    and the return code is zero.  N is a process ID; if it is not given,\n"
+#~ "    all child processes of the shell are waited for."
+#~ msgstr ""
+#~ "Menunggu sampai proses yang dispesifikasikan dan laporkan status "
+#~ "selesainya. Jika\n"
+#~ "    N tidak diberikan, semua proses anak yang masih aktif ditunggu "
+#~ "untuk,\n"
+#~ "    dan mengembalikan kode kembalian nol. N adalah sebuah proses ID; jika "
+#~ "ini tidak diberikan,\n"
+#~ "    semua proses anak dari shell ditunggu."
+
+#~ msgid ""
+#~ "Create a simple command invoked by NAME which runs COMMANDS.\n"
+#~ "    Arguments on the command line along with NAME are passed to the\n"
+#~ "    function as $0 .. $n."
+#~ msgstr ""
+#~ "Buat sebuah perintah sederhana yang memanggil dengan NAMA yang "
+#~ "menjalankan PERINTAH.\n"
+#~ "    Argumen dalam baris perintah dengan NAMA dilewatkan ke\n"
+#~ "    fungsi sebagai $0 .. $n."
+
+#~ msgid ""
+#~ "Toggle the values of variables controlling optional behavior.\n"
+#~ "    The -s flag means to enable (set) each OPTNAME; the -u flag\n"
+#~ "    unsets each OPTNAME.  The -q flag suppresses output; the exit\n"
+#~ "    status indicates whether each OPTNAME is set or unset.  The -o\n"
+#~ "    option restricts the OPTNAMEs to those defined for use with\n"
+#~ "    `set -o'.  With no options, or with the -p option, a list of all\n"
+#~ "    settable options is displayed, with an indication of whether or\n"
+#~ "    not each is set."
+#~ msgstr ""
+#~ "Ubah nilai dari variabel yang mengontrol perilaku opsional.\n"
+#~ "    Pilihan -s berarti untuk mengaktifkan (set) setiap OPTNAME; pilihan -"
+#~ "u\n"
+#~ "    mengunset setiap OPTNAME. tanda -q menekan keluaran; status keluaran\n"
+#~ "    mengindikasikan apakah setiap OPTNAME diset atau diunset. Pilihan -o\n"
+#~ "    membatasi OPTNAME ke nilai yang didefinisikan untuk digunakan dengan\n"
+#~ "    `set -o'. Tanpa pilihan, atau dengan pilihan -p, sebuah daftar dari "
+#~ "seluruh\n"
+#~ "    pilihan yang bisa diset ditampilkan, tanpa sebuah indikasi apakah "
+#~ "salah satu atau\n"
+#~ "    bukan setiap dari variabel diset."
+
+#~ msgid ""
+#~ "For each NAME, specify how arguments are to be completed.\n"
+#~ "    If the -p option is supplied, or if no options are supplied, "
+#~ "existing\n"
+#~ "    completion specifications are printed in a way that allows them to "
+#~ "be\n"
+#~ "    reused as input.  The -r option removes a completion specification "
+#~ "for\n"
+#~ "    each NAME, or, if no NAMEs are supplied, all completion "
+#~ "specifications."
+#~ msgstr ""
+#~ "Untuk setiap NAMA, spesifikasikan bagaimana argumen akan diselesaikan.\n"
+#~ "    Jika pilihan -p diberikan, atau tidak ada pilihan yang diberikan, "
+#~ "completion\n"
+#~ "    spesifikasi yang telah ada ditampilkan dalam sebuah cara yang "
+#~ "membolehkan mereka untuk\n"
+#~ "    digunakan sebagai masukan. Pilihan -r menghapus sebuah spesifikasi "
+#~ "completion untuk\n"
+#~ "    setiap NAMA, atau jika tidak ada NAMA yang diberikan, untuk semua "
+#~ "spesifikasi completion."
diff --git a/po/insert-header.sin b/po/insert-header.sin
new file mode 100644
index 0000000..b26de01
--- /dev/null
+++ b/po/insert-header.sin
@@ -0,0 +1,23 @@
+# Sed script that inserts the file called HEADER before the header entry.
+#
+# At each occurrence of a line starting with "msgid ", we execute the following
+# commands. At the first occurrence, insert the file. At the following
+# occurrences, do nothing. The distinction between the first and the following
+# occurrences is achieved by looking at the hold space.
+/^msgid /{
+x
+# Test if the hold space is empty.
+s/m/m/
+ta
+# Yes it was empty. First occurrence. Read the file.
+r HEADER
+# Output the file's contents by reading the next line. But don't lose the
+# current line while doing this.
+g
+N
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
diff --git a/po/it.gmo b/po/it.gmo
new file mode 100644
index 0000000..4bbd10a
--- /dev/null
+++ b/po/it.gmo
diff --git a/po/it.po b/po/it.po
new file mode 100644
index 0000000..1defc40
--- /dev/null
+++ b/po/it.po
@@ -0,0 +1,6136 @@
+# Italian translation for bash
+# Copyright (C) 2009 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+# Sergio Zanchetta <primes2h@ubuntu.com>, 2010, 2011.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: bash-4.2\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2011-10-17 09:14+0200\n"
+"Last-Translator: Sergio Zanchetta <primes2h@ubuntu.com>\n"
+"Language-Team: Italian <tp@lists.linux.it>\n"
+"Language: it\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=2; plural= (n != 1)\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "indice dell'array errato"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr ""
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: impossibile convertire un array indicizzato in uno associativo"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: chiave dell'array associativo non valida"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: impossibile assegnare a un indice non numerico"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr ""
+"%s: %s: deve essere usato un indice nell'assegnazione di un array associativo"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: impossibile creare: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr ""
+"bash_execute_unix_command: impossibile trovare una mappatura per il comando"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: il primo carattere non spazio non è \"\"\""
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "carattere di chiusura \"%c\" non presente in %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: separatore di tipo due punti mancante"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "\"%s\": impossibile eliminare l'associazione"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr ""
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr ""
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr ""
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "\"%s\": nome alias non valido"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "modifica delle righe non abilitata"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "\"%s\": nome della mappatura non valido"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: impossibile leggere: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "\"%s\" nome della funzione sconosciuto"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s non è associato ad alcun tasto.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s può essere invocato tramite "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "\"%s\": impossibile eliminare l'associazione"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "numero di cicli"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "significativo solo in un ciclo \"for\", \"while\" o \"until\""
+
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Restituisce il contesto della chiamata alla subroutine corrente.\n"
+"    \n"
+"    Senza ESPR, restituisce \"$riga $nomefile\".  Con ESPR, restituisce\n"
+"    \"$riga $subroutine $nomefile\"; questa informazione aggiuntiva può "
+"essere usata\n"
+"    per fornire uno stack trace.\n"
+"    \n"
+"    Il valore dell'ESPR indica di quanti frame di chiamata tornare indietro "
+"rispetto\n"
+"    a quello attuale; in cima c'è il frame 0.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce 0 a meno che non sia in esecuzione una funzione di shell o "
+"che l'ESPR\n"
+"    non sia valida."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "HOME non impostata"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "troppi argomenti"
+
+#: builtins/cd.def:342
+#, fuzzy
+msgid "null directory"
+msgstr "nessun'altra directory"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "OLDPWD non impostata"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "riga %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "attenzione: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: uso: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: l'opzione richiede un argomento"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: è necessario un argomento numerico"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: non trovata"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: opzione non valida"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: nome dell'opzione non valido"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "\"%s\": non è un identificatore valido"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "numero ottale non valido"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "numero esadecimale non valido"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "numero non valido"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: specifica di segnale non valida"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "\"%s\": non è un pid o un numero di job valido"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: variabile in sola lettura"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s fuori dall'intervallo"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "argomento"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s fuori dall'intervallo"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: job inesistente"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: nessun controllo dei job"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "nessun controllo dei job"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: limitato"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "limitato"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: non è un comando interno di shell"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "errore in scrittura: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "errore nell'impostazione degli attributi del terminale: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "errore nel recupero degli attributi del terminale: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: errore nel recupero della directory corrente: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: specifica di job ambigua"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr ""
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: impossibile azzerare: %s in sola lettura"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: impossibile azzerare"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: nome azione non valido"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: nessun completamento specificato"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "attenzione: l'opzione -F potrebbe non funzionare come previsto"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "attenzione: l'opzione -C potrebbe non funzionare come previsto"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "funzione di completamento attualmente non in esecuzione"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "può essere usato solo in una funzione"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr ""
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr ""
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr ""
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, fuzzy, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "\"%s\": nome alias non valido"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "impossibile usare \"-f\" per creare funzioni"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: funzione in sola lettura"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr ""
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: impossibile eliminare variabili array in questo modo"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: impossibile convertire un array associativo in uno indicizzato"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "caricamento dinamico non disponibile"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "impossibile aprire l'oggetto condiviso %s: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "impossibile trovare %s nell'oggetto condiviso %s: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: non caricato dinamicamente"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr ""
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: non caricato dinamicamente"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: impossibile eliminare: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: è una directory"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: non è un file regolare"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: file troppo grande"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: impossibile eseguire il file binario"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: impossibile eseguire: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "logout\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "non è una shell di login: utilizzare \"exit\""
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Sono presenti job interrotti.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Ci sono job in esecuzione.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "nessun comando trovato"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "specifica della cronologia"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: impossibile aprire il file temp: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "attuale"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "job %d avviato senza controllo dei job"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: opzione illecita -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: l'opzione richiede un argomento -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "hashing disabilitato"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s tabella di hash vuota\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "rich.\tcomando\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Comandi di shell corrispondenti alla parola chiave \""
+msgstr[1] "Comandi di shell corrispondenti alle parole chiave \""
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"nessun argomento della guida corrisponde a \"%s\". Provare \"help help\" o "
+"\"man -k %s\" o \"info %s\"."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: impossibile aprire: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Questi comandi della shell sono definiti internamente. Digitare \"help\" per "
+"consultare questa lista.\n"
+"Digitare \"help nome\" per saperne di più sulla funzione \"nome\".\n"
+"Usare \"info bash\" per saperne di più sulla shell in generale.\n"
+"Usare \"man -k\" o \"info\" per saperne di più su comandi non presenti nella "
+"lista.\n"
+"\n"
+"Un asterisco (*) vicino a un nome significa che il comando è disabilitato.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "impossibile usare più di uno tra -anrw"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "posizione nella cronologia"
+
+#: builtins/history.def:340
+#, fuzzy, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: nome dell'opzione non valido"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: espansione della cronologia non riuscita"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: inlib non riuscito"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "nessuna altra opzione permessa con \"-x\""
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: gli argomenti devono essere ID di processo o di job"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Errore sconosciuto"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "attesa espressione"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: non è un array indicizzato"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: specifica di descrittore di file non valida"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: descrittore di file non valido: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: numero di righe non valido"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: origine dell'array non valida"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: quantum di callback non valido"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "nome della variabile array vuoto"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "necessario il supporto alla variabile array"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "\"%s\": manca il carattere di formato"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "\"%c\": specifica di formato dell'orario non valida"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "\"%c\": carattere di formato non valido"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "attenzione: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr ""
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "cifra esadecimale mancante in \\x"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "cifra unicode mancante in \\%c"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "nessun'altra directory"
+
+#: builtins/pushd.def:360
+#, fuzzy, c-format
+msgid "%s: invalid argument"
+msgstr "%s: argomento di limite non valido"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<nessuna directory corrente>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "stack delle directory vuoto"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "indice dello stack delle directory"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Visualizza l'elenco delle directory attualmente in memoria. Le directory\n"
+"    vengono inserite nell'elenco con il comando \"pushd\"; è possibile\n"
+"    andare a ritroso nell'elenco con il comando \"popd\".\n"
+"    \n"
+"    Opzioni:\n"
+"      -c\tPulisce lo stack delle directory eliminandone tutti gli elementi\n"
+"      -l\tNon stampa la tilde come prefisso per le directory relative alla\n"
+"    \tpropria directory home\n"
+"      -p\tStampa lo stack delle directory una voce per riga\n"
+"      -v\tStampa lo stack delle directory una voce per riga usando la\n"
+"    \tposizione nello stack stesso come prefisso\n"
+"    \n"
+"    Argomenti:\n"
+"      +N\tVisualizza l'N-sima voce contando a partire da sinistra "
+"dell'elenco\n"
+"    \tmostrato da dirs quando invocato senza opzioni, iniziando da zero.\n"
+"    \n"
+"      -N\tVisualizza l'N-sima voce contando a partire da destra dell'elenco\n"
+"\tmostrato da dirs quando invocato senza opzioni, iniziando da zero."
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Aggiunge una directory in cima allo stack delle directory o ruota lo\n"
+"    stack stesso, mettendo come primo elemento l'attuale directory\n"
+"    di lavoro. Senza argomenti scambia le prime due directory in cima.\n"
+"    \n"
+"    Opzioni:\n"
+"      -n\tEvita il normale cambio di directory quando vengono aggiunte\n"
+"    \tdirectory allo stack, così da manipolare solo lo stack stesso.\n"
+"    \n"
+"    Argomenti:\n"
+"      +N\tRuota lo stack in modo che l'N-sima directory (contando\n"
+"    \ta partire da sinistra dell'elenco mostrato da \"dirs\", iniziando da\n"
+"    \tzero) sia in cima.\n"
+"    \n"
+"      -N\tRuota lo stack in modo che l'N-sima directory (contando\n"
+"    \ta partire da destra dell'elenco mostrato da \"dirs\", iniziando da\n"
+"    \tzero) sia in cima.\n"
+"    \n"
+"      dir\tAggiunge DIR in cima allo stack delle directory, facendone la\n"
+"    \tdirectory di lavoro corrente.\n"
+"    \n"
+"    Il comando interno \"dirs\" visualizza lo stack delle directory."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Rimuove voci dallo stack delle directory. Senza argomenti, rimuove\n"
+"    la directory in cima allo stack e passa alla nuova prima directory.\n"
+"    \n"
+"    Opzioni:\n"
+"      -n\tEvita il normale cambio di directory quando vengono rimosse\n"
+"    \tdirectory dallo stack, così da manipolare solo lo stack stesso.\n"
+"    \n"
+"    Argomenti:\n"
+"      +N\tRimuove l'N-sima voce contando a partire da sinistra dell'elenco\n"
+"    \tmostrato da \"dirs\", iniziando da zero. Per esempio: \"popd +0\"\n"
+"    \trimuove la prima directory, \"popd +1\" la seconda.\n"
+"    \n"
+"      -N\tRimuove l'N-sima voce contando a partire da destra dell'elenco\n"
+"    \tmostrato da \"dirs\", iniziando da zero. Per esempio: \"popd -0\"\n"
+"    \trimuove l'ultima directory, \"popd -1\" la penultima.\n"
+"    \n"
+"    Il comando interno \"dirs\" visualizza lo stack delle directory."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: specifica di timeout non valida"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "errore in lettura: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr ""
+"è possibile eseguire \"return\" solo da una funzione o da uno script chiamato"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "impossibile azzerare contemporaneamente una funzione e una variabile"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: non è una variabile array"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: non è una funzione"
+
+#: builtins/setattr.def:194
+#, fuzzy, c-format
+msgid "%s: cannot export"
+msgstr "%s: impossibile azzerare"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "numero di scorrimenti"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "impossibile impostare e azzerare opzioni di shell contemporaneamente"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: nome dell'opzione di shell non valido"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "necessario un nome file come argomento"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: file non trovato"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "impossibile sospendere"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "impossibile sospendere una shell di login"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s ha \"%s\" come alias\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s è una parola chiave di shell\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s è una funzione\n"
+
+#: builtins/type.def:299
+#, fuzzy, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s è un comando interno di shell\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s è un comando interno di shell\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s è %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "hash effettuato su %s (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: argomento di limite non valido"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "\"%c\": comando errato"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: impossibile recuperare il limite: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "limite"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: impossibile modificare il limite: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "numero ottale"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "\"%c\": operatore di modo simbolico non valido"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "\"%c\": carattere di modo simbolico non valido"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " riga "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "ultimo comando: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Interruzione..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr ""
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "errore di comando sconosciuto"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "tipo di comando errato"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "connettore errato"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "salto errato"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: variabile non assegnata"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\atempo di attesa scaduto per l'input: auto-logout\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "impossibile redirigere lo standard input da /dev/null: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "TIMEFORMAT: \"%c\": carattere di formato non valido"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr ""
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "errore della pipe"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: limitato: impossibile specificare \"/\" nei nomi dei comandi"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: comando non trovato"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: interprete errato"
+
+#: execute_cmd.c:5891
+#, fuzzy, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: impossibile eseguire il file binario"
+
+#: execute_cmd.c:5977
+#, fuzzy, c-format
+msgid "`%s': is a special builtin"
+msgstr "%s è un comando interno di shell\n"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "impossibile duplicare fd %d su fd %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "superato il livello di ricorsione dell'espressione"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "underflow dello stack di ricorsione"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "errore di sintassi nell'espressione"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "tentata un'assegnazione a una non variabile"
+
+#: expr.c:530
+#, fuzzy
+msgid "syntax error in variable assignment"
+msgstr "errore di sintassi nell'espressione"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "divisione per 0"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "bug: token di expassign errato"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "atteso \":\" per l'espressione condizionale"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "esponente minore di 0"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "atteso identificatore dopo un pre-incremento o un pre-decremento"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "\")\" mancante"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "errore di sintassi: atteso un operando"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "errore di sintassi: operatore aritmetico non valido"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (il token dell'errore è \"%s\")"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "base aritmetica non valida"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: numero di righe non valido"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "valore troppo grande per la base"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: errore di espressione\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: impossibile accedere alle directory padre"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "impossibile reimpostare il modo nodelay per fd %d"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr ""
+"impossibile allocare un nuovo descrittore di file per l'input della bash da "
+"fd %d"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input: buffer già esistente per il nuovo fd %d"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: pipe pgrp"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "il pid %d del fork appare nel job in esecuzione %d"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "eliminazione del job %d interrotto con il gruppo di processi %ld"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process: pid %5ld (%s) segnato come ancora in vita"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: pid inesistente"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Segnale %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Completato"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Fermato"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Fermato(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "In esecuzione"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Eseguito(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Uscita %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Stato sconosciuto"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(core dump creato) "
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (dir: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "setpgid del figlio (%ld a %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: il pid %ld non è un figlio di questa shell"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: nessun record del processo %ld"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: il job %d è fermo"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: job inesistente"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: il job è terminato"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: il job %d è già in background"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr "waitchld: attivato WNOHANG per evitare blocchi indefiniti"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: riga %d: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (core dump creato)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(dir ora: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: getpgrp non riuscita"
+
+#: jobs.c:4447
+#, fuzzy
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: disciplina di linea"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: disciplina di linea"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "impossibile impostare il gruppo di processi del terminale (%d)"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "nessun controllo dei job in questa shell"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: asserzione non riuscita: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d: asserzione non riuscita\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "sconosciuto"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: blocco eliminato nell'elenco dei disponibili"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: chiamata con un argomento di blocco già liberato"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: chiamata con un argomento di blocco non allocato"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: riscontrato un underflow; mh_nbytes fuori intervallo"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: riscontrato un underflow; mh_nbytes fuori intervallo"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: dimensioni diverse dei blocchi di inizio e di fine"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: chiamata con un argomento di blocco non allocato"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc: riscontrato un underflow; mh_nbytes fuori intervallo"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc: riscontrato un underflow; mh_nbytes fuori intervallo"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: dimensioni diverse dei blocchi di inizio e di fine"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr ""
+"register_alloc: forse la tavola di allocazione è piena con FIND_ALLOC\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: forse %p è già come allocato nella tabella\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_alloc: forse %p è già come libero nella tabella\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "base non valida"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: host sconosciuto"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: servizio non valido"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: specifica del percorso di rete errata"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "operazione di rete non supportata"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: impossibile cambiare la localizzazione (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: impossibile cambiare la localizzazione (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: impossibile cambiare la localizzazione (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: impossibile cambiare la localizzazione (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "EÌ€ presente della posta in $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "EÌ€ presente della nuova posta in $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "La posta in %s è stata letta\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "errore di sintassi: richiesta espressione aritmetica"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "errore di sintassi: \";\" non atteso"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "errore di sintassi: \"((%s))\""
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: tipo di istruzione errata %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr ""
+"here-document alla riga %d è delimitato da un EOF (era richiesto \"%s\")"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr ""
+"make_redirection: istruzione di reindirizzamento \"%d\" fuori dell'intervallo"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr ""
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "EOF non atteso durante la ricerca di \"%c\""
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "EOF non atteso durante la ricerca di \"]]\""
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr ""
+"errore di sintassi nell'espressione condizionale: token non atteso \"%s\""
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "errore di sintassi nell'espressione condizionale"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "token non atteso \"%s\", era atteso \")\""
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "atteso \")\""
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "argomento non atteso \"%s\" per l'operatore unario condizionale"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "argomento non atteso per l'operatore unario condizionale"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "token non atteso \"%s\", era atteso un operatore binario condizionale"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "atteso operatore binario condizionale"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "argomento non atteso \"%s\" per l'operatore binario condizionale"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "argomento non atteso per l'operatore binario condizionale"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "token non atteso \"%c\" nel comando condizionale"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "token non atteso \"%s\" nel comando condizionale"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "token non atteso %d nel comando condizionale"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "errore di sintassi vicino al token non atteso \"%s\""
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "errore di sintassi vicino a \"%s\""
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "errore di sintassi: EOF non atteso"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "errore di sintassi"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Usare \"%s\" per uscire dalla shell.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "EOF non atteso durante la ricerca di \")\""
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "completion: funzione \"%s\" non trovata"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr ""
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: COMPSPEC NULL"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: connettore errato \"%d\""
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: descrittore di file non valido"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: puntatore a file NULL"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != numfile xtrace fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: \"%c\": carattere di formato non valido"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "descrittore di file fuori dell'intervallo"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: redirezione ambigua"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: impossibile sovrascrivere il file esistente"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: limitato: impossibile redirigere l'output"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "impossibile creare un file temporaneo per here-document: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: impossibile assegnare fd a una variabile"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "/dev/(tcp|udp)/host/port non supportata senza rete"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "errore di reindirizzamento: impossibile duplicare fd"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "impossibile trovare /tmp, è necessario crearla"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp deve essere un nome di directory valido"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr ""
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: opzione non valida"
+
+#: shell.c:1319
+#, fuzzy, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "impossibile reimpostare il modo nodelay per fd %d"
+
+#: shell.c:1330
+#, fuzzy, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "impossibile reimpostare il modo nodelay per fd %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr ""
+
+#: shell.c:1632
+#, fuzzy, c-format
+msgid "%s: Is a directory"
+msgstr "%s: è una directory"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "Manca il nome"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, versione %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Uso:\t%s [opzione lunga GNU] [opzione] ...\n"
+"\t%s [opzione lunga GNU] [opzione] file-script ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "Opzioni lunghe GNU:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Opzioni di shell:\n"
+
+#: shell.c:2043
+#, fuzzy
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-irsD o -c comando o -O opzione_shopt\t\t(solo invocazione)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\topzione -%s oppure -o\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+"Digitare «%s -c \"help set\"» per ulteriori informazioni sulle opzioni di "
+"shell.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr ""
+"Digitare \"%s -c help\" per ulteriori informazioni sui comandi interni di "
+"shell.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "Usare il comando \"bashbug\" per segnalare i bug.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr ""
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr ""
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: operazione non valida"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Segnale inesistente"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Chiusura"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Interruzione"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Uscita (con core dump)"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Istruzione non consentita"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "Rilevato trace/breakpoint"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "Istruzione ABORT"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "Istruzione EMT"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Eccezione in virgola mobile"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Ucciso"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Errore di bus"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Errore di segmentazione"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Chiamata di sistema errata"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Pipe interrotta"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Sveglia"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Terminato"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Condizione di I/O urgente"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Fermato (segnale)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Continuato"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Processo figlio concluso o fermato"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Fermato (input da terminale)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Fermato (output da terminale)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "I/O pronto"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "Limite di CPU"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "Limite di file"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Timer (virtuale)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Timer (profilo)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Finestra modificata"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Blocco del record"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Segnale 1 dell'utente"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Segnale 2 dell'utente"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "Dati di input HTF in sospeso"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "mancanza di alimentazione imminente"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "crash di sistema imminente"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "processo spostato su un'altra CPU"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "errore di programmazione"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "Modalità di monitoraggio HFT concessa"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "Modalità di monitoraggio HFT revocata"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "la sequenza sonora HFT è stata completata"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "Richiesta di informazioni"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "Segnale sconosciuto n° %d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "sostituzione errata: nessuna chiusura di \"%s\" in %s"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: impossibile assegnare una lista a un membro di un array"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "impossibile creare una pipe per la sostituzione del processo"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "impossibile creare un figlio per la sostituzione del processo"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "impossibile aprire la pipe con nome %s in lettura"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "impossibile aprire la pipe con nome %s in scrittura"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "impossibile duplicare una pipe con nome %s come fd %d"
+
+#: subst.c:6213
+#, fuzzy
+msgid "command substitution: ignored null byte in input"
+msgstr "sostituzione errata: manca «\"» di chiusura in %s"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "impossibile creare una pipe per la sostituzione del comando"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "impossibile creare un figlio per la sostituzione del comando"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute: impossibile duplicare la pipe come fd 1"
+
+#: subst.c:6883 subst.c:9952
+#, fuzzy, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: %s: valore non valido per il descrittore del file di traccia"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, fuzzy, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: numero di righe non valido"
+
+#: subst.c:7013 subst.c:7177
+#, fuzzy, c-format
+msgid "%s: invalid variable name"
+msgstr "\"%s\": nome alias non valido"
+
+#: subst.c:7256
+#, fuzzy, c-format
+msgid "%s: parameter not set"
+msgstr "%s: parametro nullo o non impostato"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: parametro nullo o non impostato"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: expressione di sottostringa < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: sostituzione errata"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: impossibile assegnare in questo modo"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+"le versioni future della shell forzeranno la valutazione come fosse una "
+"sostituzione aritmetica"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "sostituzione errata: manca «\"» di chiusura in %s"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "nessuna corrispondenza: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "atteso argomento"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: attesa espressione intera"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "atteso \")\""
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "atteso \")\", trovato %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: atteso operatore binario"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: atteso operatore unario"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "\"]\" mancante"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "errore di sintassi: \";\" non atteso"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "numero di segnale non valido"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr ""
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: valore errato in trap_list[%d]: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps: il gestore dei segnali è SIG_DFL, viene inviato "
+"nuovamente %d (%s)"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: segnale errato %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "errore nell'importazione della definizione di funzione per \"%s\""
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "livello di shell (%d) troppo alto, reimpostato a 1"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: nessun contesto di funzione nell'ambito corrente"
+
+#: variables.c:2693
+#, fuzzy, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: impossibile assegnare fd a una variabile"
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr ""
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: nessun contesto di funzione nell'ambito corrente"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s ha exportstr null"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "carattere non valido %d in exportstr per %s"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "nessun \"=\" in exportstr per %s"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr ""
+"pop_var_context: la prima parte di shell_variables non è un contesto di "
+"funzione"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: nessun contesto global_variables"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr ""
+"pop_scope: la prima parte di shell_variables non è un ambito temporaneo "
+"d'ambiente"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: impossibile aprire come FILE"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: valore non valido per il descrittore del file di traccia"
+
+#: variables.c:6437
+#, fuzzy, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s fuori dall'intervallo"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Copyright © 2009 Free Software Foundation, Inc.\n"
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"Licenza GPLv3+: GNU GPL versione 3 o successiva <http://gnu.org/licenses/gpl."
+"html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, versione %s (%s)\n"
+
+#: version.c:91 version2.c:91
+#, fuzzy
+msgid "This is free software; you are free to change and redistribute it."
+msgstr "Questo è software libero; è possibile modificarlo e ridistribuirlo.\n"
+
+#: version.c:92 version2.c:92
+#, fuzzy
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "Non c'è ALCUNA GARANZIA, nei limiti permessi dalla legge.\n"
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: impossibile allocare %lu byte (%lu byte allocati)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: impossibile allocare %lu byte"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: impossibile allocare %lu byte (%lu byte allocati)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: impossibile allocare %lu byte"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [nome[=valore] ... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] nome [nome ...]"
+
+#: builtins.c:53
+#, fuzzy
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpvsPVS] [-m mappatura] [-f nomefile] [-q nome] [-u nome] [-r "
+"seqtasti] [-x seqtasti:comando-shell] [seqtasti:funzione-readline o comando-"
+"readline]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [comandoint-shell [arg ...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [espr]"
+
+#: builtins.c:66
+#, fuzzy
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]]] [dir]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] comando [arg ...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilrtux] [-p] [nome[=valore] ...]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilrtux] [-p] nome[=valore] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [opzione] nome[=valore] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [arg ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [arg ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f nome_file] [nome ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [arg ...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts stringaopz nome [arg]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a nome] [comando [argomenti ...]] [redirezione ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr "fc [-e ename] [-lnr] [primo] [ultimo] oppure fc -s [pat=rep] [comando]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [spec_job]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [spec_job ...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p nomepercorso] [-dt] [nome ...]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [modello ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d posiz] [n] oppure history -anrw [nomefile] oppure history -"
+"ps arg [arg...]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [specjob ...] oppure jobs -x comando [argomenti]"
+
+#: builtins.c:131
+#, fuzzy
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [specjob ...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s specsegn | -n numsegn | -specsegn] pid | specjob ... oppure kill -l "
+"[specsegn]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let arg [arg ...]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a array] [-d delim] [-i testo] [-n ncaratt] [-N ncaratt] [-p "
+"stringa] [-t secondi] [-u fd] [nome ...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o nome-opzione] [--] [arg ...]"
+
+#: builtins.c:144
+#, fuzzy
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [nome ...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [nome[=valore] ...] oppure export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [nome[=valore] ...] oppure readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source nomefile [argomenti]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". nomefile [argomenti]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [espr]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ arg... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[arg] spec_segnale ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] nome [nome ...]"
+
+#: builtins.c:171
+#, fuzzy
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHacdefilmnpqrstuvx] [limite]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [modo]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [id]"
+
+#: builtins.c:181
+#, fuzzy
+msgid "wait [pid ...]"
+msgstr "wait [pid]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for NOME [in PAROLE ... ] ; do COMANDI; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( espr1; espr2; espr3 )); do COMANDI; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select NOME [in PAROLE ... ;] do COMANDI; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] pipeline"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case PAROLA in [MODELLO [| MODELLO]...) COMANDI ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if COMANDI; then COMANDI; [ elif COMANDI; then COMANDI; ]... [ else "
+"COMANDI; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while COMANDI; do COMANDI; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until COMANDI; do COMANDI; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [NOME] comando [redirezioni]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function name { COMANDI ; } oppure name () { COMANDI ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ COMANDI ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "spec_job [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( espressione ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ espressione ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "variabili - nomi e significati di alcune variabili di shell"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | dir]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [nomeopz ...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v var] formato [argomenti]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DE] [-o opzione] [-A azione] [-G modglob] [-"
+"W elencoparole]  [-F funzione] [-C comando] [-X modfiltro] [-P prefisso] [-S "
+"suffisso] [nome ...]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o opzione]  [-A azione] [-G modglob] [-W "
+"elencoparole]  [-F funzione] [-C comando] [-X modfiltro] [-P prefisso] [-S "
+"suffisso] [parola]"
+
+#: builtins.c:239
+#, fuzzy
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o opzione] [-DE] [nome ...]"
+
+#: builtins.c:242
+#, fuzzy
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-n numero] [-O origine] [-s numero] [-t] [-u fd] [-C callback] [-c "
+"quantità] [array]"
+
+#: builtins.c:244
+#, fuzzy
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-n numero] [-O origine] [-s numero] [-t] [-u fd] [-C callback] [-"
+"c quantità] [array]"
+
+#: builtins.c:256
+#, fuzzy
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Definisce o visualizza alias.\n"
+"    \n"
+"    Senza argomenti, \"alias\" stampa l'elenco degli alias nella forma\n"
+"    riusabile \"alias NOME=VALORE\" sullo standard output.\n"
+"    \n"
+"    Altrimenti, un alias è definito per ogni NOME a cui è fornito un "
+"VALORE.\n"
+"    Uno spazio finale in VALORE determina un controllo della parola "
+"successiva\n"
+"    che andrà a sostituire l'alias quando viene espanso.\n"
+"    \n"
+"    Opzioni:\n"
+"      -p\tStampa tutti gli alias definiti in un formato riusabile\n"
+"    \n"
+"    Stato di uscita:\n"
+"    alias restituisce vero a meno che non venga fornito un NOME per il "
+"quale\n"
+"    non sia stato definito alcun alias."
+
+#: builtins.c:278
+#, fuzzy
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Rimuove ogni NOME dall'elenco degli alias definiti.\n"
+"    \n"
+"    Opzioni:\n"
+"      -a\tRimuove tutte le definizioni di alias.\n"
+"    \n"
+"    Restituisce successo a meno che NOME non sia un alias esistente."
+
+#: builtins.c:291
+#, fuzzy
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"Imposta le associazioni di tasti e le variabili di Readline.\n"
+"    \n"
+"    Associa una sequenza di tasti a una funzione o a una macro Readline, "
+"oppure imposta una\n"
+"    variabile di Readline.  La sintassi di argomento senza opzione è "
+"equivalente a quella\n"
+"    trovata in ~/.inputrc, ma deve essere passata come singolo argomento:\n"
+"    es., bind '\"\\C-x\\C-r\": ri-leggi-file-init'.\n"
+"    \n"
+"    Opzioni:\n"
+"      -m  mappatura      Usa MAPPATURA come la mappatura per la durata di "
+"questo\n"
+"                         comando.  Nomi accettabili per la mappatura sono "
+"emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command e vi-insert.\n"
+"      -l                 Elenca i nomi delle funzioni.\n"
+"      -P                 Elenca i nomi delle funzioni e le associazioni.\n"
+"      -p                 Elenca le funzioni e le associazioni in una forma "
+"che\n"
+"                         possa essere riusata come input.\n"
+"      -S                 Elenca le sequenze di tasti che invocano le macro e "
+"i loro valori.\n"
+"      -s                 Elenca le sequenze di tasti che invocano le macro e "
+"i loro valori\n"
+"                         in una forma che possa essere riusata come input.\n"
+"      -V                 Elenca i nomi e i valori delle variabili.\n"
+"      -v                 Elenca i nomi e i valori delle variabili in una "
+"forma che possa\n"
+"                         essere riusata come input.\n"
+"      -q  nome-funzione  Identifica il tasto che invoca la funzione "
+"nominata.\n"
+"      -u  nome-funzione  Rimuove l'associazione tra la funzione nominata e "
+"tutti i tasti associati.\n"
+"      -r  seqtasti       Rimuove l'associazione per la SEQTASTI.\n"
+"      -f  nomefile       Legge le associazioni di tasti da NOMEFILE.\n"
+"      -x  seqtasti:comando-shell\tEsegue il COMANDO-SHELL quando viene "
+"inserita\n"
+"    \t\t\t\t\tla SEQTASTI.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    bind restituisce 0 a meno che non sia fornita una opzione non "
+"riconosciuta o si riscontri un errore."
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Esce da cicli for, while o until.\n"
+"    \n"
+"    Esce da un ciclo FOR, WHILE o UNTIL. Se è specificato N, interrompe N "
+"cicli\n"
+"    racchiusi.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Lo stato di uscita è 0 a meno che N non sia maggiore o uguale a 1."
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Riprende cicli for, while o until.\n"
+"    \n"
+"    Riprende l'iterazione successiva del ciclo chiuso FOR, WHILE o UNTIL.\n"
+"    Se è specificato N, riprende l'N-simo ciclo chiuso.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Lo stato di uscita è 0 a meno che N non sia maggiore o uguale a 1."
+
+#: builtins.c:354
+#, fuzzy
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Esegue comandi interni di shell.\n"
+"    \n"
+"    Esegue il COMINTERNO-SHELL con ARGOMENTI senza portare a termine una "
+"ricerca\n"
+"    comandi. Ciò è utile quando si desidera reimplementare un comando "
+"interno come una\n"
+"    funzione di shell, ma è necessario eseguire il comando all'interno della "
+"funzione.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce lo stato di uscita del COMINTERNO-SHELL, o falso se il "
+"COMINTERNO-SHELL\n"
+"    non è un comando interno di shell."
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Restituisce il contesto della chiamata alla subroutine corrente.\n"
+"    \n"
+"    Senza ESPR, restituisce \"$riga $nomefile\".  Con ESPR, restituisce\n"
+"    \"$riga $subroutine $nomefile\"; questa informazione aggiuntiva può "
+"essere usata\n"
+"    per fornire uno stack trace.\n"
+"    \n"
+"    Il valore dell'ESPR indica di quanti frame di chiamata tornare indietro "
+"rispetto\n"
+"    a quello attuale; in cima c'è il frame 0.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce 0 a meno che non sia in esecuzione una funzione di shell o "
+"che l'ESPR\n"
+"    non sia valida."
+
+#: builtins.c:387
+#, fuzzy
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"Cambia la directory di lavoro della shell.\n"
+"    \n"
+"    Cambia la directory corrente a DIR. La DIR predefinita è il valore della "
+"variabile\n"
+"    HOME della shell.\n"
+"    \n"
+"    La variabile CDPATH definisce il percorso di ricerca per la directory "
+"che contiene\n"
+"    DIR. I nomi di directory alternative in CDPATH sono separati da un due "
+"punti (:).\n"
+"    Una nome nullo di directory corrisponde alla directory corrente.  Se DIR "
+"inizia\n"
+"    con uno slash (/), CDPATH non viene usato.\n"
+"    \n"
+"    Se la directory non viene trovata e l'opzione di shell \"cdable_vars\" è "
+"impostata,\n"
+"    si assume che la parola sia un nome di variabile. Se questa variabile ha "
+"un valore,\n"
+"    viene usato per DIR.\n"
+"    \n"
+"    Opzioni:\n"
+"        -L\tForza a seguire i collegamenti simbolici\n"
+"        -P\tUsa la struttura fisica della directory senza seguire i "
+"collegamenti\n"
+"    \tsimbolici\n"
+"        -e\tSe viene fornita l'opzione -P e non può essere determinata con "
+"successo\n"
+"    \tla directory di lavoro corrente, esce con uno stato diverso da zero\n"
+"    \n"
+"    Il valore predefinito è seguire i collegamenti simbolici, come se fosse "
+"specificato \"-L\".\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce 0 se viene cambiata la directory o se $PWD è impostata con "
+"successo quando\n"
+"    viene usato -P; altrimenti un valore diverso da zero."
+
+#: builtins.c:425
+#, fuzzy
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"Stampa il nome della directory di lavoro corrente.\n"
+"    \n"
+"    Opzioni:\n"
+"      -L\tStampa il valore di $PWD se contiene il nome della directory\n"
+"    \tdi lavoro corrente\n"
+"      -P\tStampa la directory fisica senza alcun collegamento simbolico\n"
+"    \n"
+"    In maniera predefinita \"pwd\" si comporta come se fosse specificato \"-L"
+"\".\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce 0 a meno che non venga fornita una opzione non valida o che "
+"la\n"
+"    directory corrente non possa essere letta."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Comando nullo.\n"
+"    \n"
+"    Nessun effetto; il comando non esegue nulla.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    ha sempre successo."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Restituisce successo come risultato.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    ha sempre successo."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Restituisce un risultato di insuccesso.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Sempre un insuccesso."
+
+#: builtins.c:471
+#, fuzzy
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Esegue un comando semplice o visualizza informazioni sui comandi.\n"
+"    \n"
+"    Esegue il COMANDO con gli ARGOMENTI ignorando la ricerca delle funzioni "
+"di shell o\n"
+"    visualizza informazioni sui COMANDI specificati.  Può essere usato per "
+"invocare comandi\n"
+"    sul disco quando esiste una funzione con lo stesso nome.\n"
+"    \n"
+"    Opzioni:\n"
+"      -p\tUsa un valore predefinito per il PERCORSO che garantisce che "
+"vengano trovate tutte\n"
+"    \tle utilità standard\n"
+"      -v\tStampa una descrizione del COMANDO simile al comando interno \"type"
+"\"\n"
+"      -V\tStampa una descrizione più prolissa di ciascun COMANDO\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce lo stato di uscita del COMANDO o insuccesso se il COMANDO "
+"non viene trovato."
+
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"Imposta i valori e gli attributi delle variabili.\n"
+"    \n"
+"    Dichiara le variabili e fornisce loro attributi.  Se non vengono forniti "
+"NOMI,\n"
+"    visualizza gli attributi e i valori di tutte le variabili.\n"
+"    \n"
+"    Opzioni:\n"
+"      -f\tLimita l'azione o la visualizzazione ai nomi e alle definizioni di "
+"funzione\n"
+"      -F\tLimita la visualizzazione ai soli nomi di funzione (più numero di "
+"riga e\n"
+"    \tfile sorgente durante il debug)\n"
+"      -g\tCrea variabili globali quando usato in una funzione di shell; "
+"altrimenti\n"
+"    \tè ignorato\n"
+"      -p\tVisualizza gli attributi e i valori di ciascun NOME\n"
+"    \n"
+"    Opzioni che impostano gli attributi:\n"
+"      -a\tRende i NOMI array indicizzati (se supportata)\n"
+"      -A\tRende i NOMI array associativi (se supportata)\n"
+"      -i\tFornisce ai NOMI l'attributo \"integer\"\n"
+"      -l\tConverte i NOMI in lettere minuscole in fase di assegnazione\n"
+"      -r\tImposta i NOMI in sola lettura\n"
+"      -t\tFornisce ai NOMI l'attributo \"trace\"\n"
+"      -u\tConverte i NOMI in lettere maiuscole in fase di assegnazione\n"
+"      -x\tImposta i NOMI come esportabili\n"
+"    \n"
+"    Usando \"+\" al posto di \"-\" disattiva l'attributo fornito.\n"
+"    \n"
+"    Le variabili con attributo intero vengono valutate aritmeticamente "
+"(vedere\n"
+"    il comando \"let\") quando alla variabile è assegnato un valore.\n"
+"    \n"
+"    Quando viene usato in una funzione, \"declare\" rende locali i NOMI, "
+"come con\n"
+"    il comando \"local\".\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che non sia fornita una opzione non valida o "
+"si riscontri un errore."
+
+#: builtins.c:532
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"Imposta valori e attributi di variabile.\n"
+"    \n"
+"    Obsoleto. Vedere \"help declare\"."
+
+#: builtins.c:540
+#, fuzzy
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Definisce variabili locali.\n"
+"    \n"
+"    Crea una variabile locale chiamata NOME fornendogli un VALORE. L'OPZIONE "
+"può\n"
+"    essere una qualsiasi opzione accettata da \"declare\".\n"
+"    \n"
+"    Le variabili locali possono essere usate solo all'interno di una "
+"funzione; sono\n"
+"    visibili solo alla funzione nella quale sono definite e ai relativi "
+"figli.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che non venga fornita un'opzione non valida, "
+"non si\n"
+"    riscontri un errore o la shell non stia eseguendo una funzione."
+
+#: builtins.c:557
+#, fuzzy
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Scrive argomenti sullo standard output.\n"
+"    \n"
+"    Visualizza gli ARG sullo standard output seguiti da un ritorno a capo.\n"
+"    \n"
+"    Opzioni:\n"
+"      -n\tNon accoda un carattere di ritorno a capo\n"
+"      -e\tAbilita l'interpretazione dei seguenti caratteri backslash di "
+"escape\n"
+"      -E\tDisabilita esplicitamente l'interpretazione dei caratteri "
+"backslash di escape\n"
+"    \n"
+"    \"echo\" interpreta i seguenti caratteri backslash di escape:\n"
+"      \\a\tavviso (campanello)\n"
+"      \\b\tbackspace\n"
+"      \\c\telimina ulteriore output\n"
+"      \\e\tcarattere di escape\n"
+"      \\f\tavanzamento pagina\n"
+"      \\n\tritorno a capo\n"
+"      \\r\tritorno carrello\n"
+"      \\t\ttabulazione orizzontale\n"
+"      \\v\ttabulazione verticale\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\til carattere il cui codice ASCII è NNN (ottale).  NNN può "
+"avere\n"
+"    \tda 0 a 3 cifre ottali\n"
+"      \\xHH\til carattere otto bit il cui valore è HH (esadecimale).  HH "
+"può\n"
+"    \tavere una o due cifre esadecimali\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che non venga riscontrato un errore di "
+"scrittura."
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Scrive argomenti sullo standard output.\n"
+"    \n"
+"    Visualizza gli ARG sullo standard output seguiti da un ritorno a capo.\n"
+"    \n"
+"    Opzioni:\n"
+"      -n\tNon accoda un ritorno a capo\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che non venga riscontrato un errore di "
+"scrittura."
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"Abilita o disabilita comandi interni di shell.\n"
+"    \n"
+"    Abilita o disabilita comandi interni di shell. La disabilitazione "
+"permette di\n"
+"    eseguire un comando su disco che abbia lo stesso nome del comando "
+"interno\n"
+"    di shell senza dover usare un nome di percorso completo.\n"
+"    \n"
+"    Opzioni:\n"
+"      -a\tStampa un elenco di comandi interni mostrando se sono abilitati o "
+"meno\n"
+"      -n\tDisabilita ogni NOME o visualizza un elenco di comandi interni "
+"disabilitati\n"
+"      -p\tStampa l'elenco dei comandi interni in un formato riusabile\n"
+"      -s\tStampa solo i nomi dei comandi interni \"speciali\" Posix\n"
+"    \n"
+"    Opzioni che controllano il caricamento dinamico:\n"
+"      -f\tCarica il comando interno NOME dall'oggetto condiviso NOMEFILE\n"
+"      -d\tRimuove un comando interno caricato con -f\n"
+"    \n"
+"    Senza opzioni viene abilitato ogni NOME.\n"
+"    \n"
+"    Per usare il comando \"test\" trovato in $PATH invece di quello interno "
+"della\n"
+"    shell, digitare \"enable -n test\".\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che NOME non sia un comando interno di shell "
+"o si riscontri un errore."
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Esegue argomenti come un comando di shell.\n"
+"    \n"
+"    Combina gli ARGOMENTI dentro una singola stringa usando il risultato\n"
+"    come input per la shell ed esegue i comandi risultanti.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce lo stato di uscita del comando o successo se il comando è "
+"nullo."
+
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"Analizza gli argomenti di opzione.\n"
+"    \n"
+"    Getopts è usato dalle procedure di shell per analizzare i parametri\n"
+"    posizionali come opzioni.\n"
+"    \n"
+"    STRINGAOPZ contiene le lettere di opzione da riconoscere; se una "
+"lettera\n"
+"    è seguita da un due punti, ci si aspetta che l'opzione abbia un "
+"argomento,\n"
+"    che dovrebbe essere separato da uno spazio.\n"
+"    \n"
+"    Ogni volta che viene evocato getopts posiziona l'opzione successiva\n"
+"    nella variabile di shell $nome inizializzando il nome, se non esiste,\n"
+"    e l'indice dell'argomento successivo da elaborare nella variabile di\n"
+"    shell OPTIND.  OPTIND è inizializzata a 1 ogni volta che viene invocata\n"
+"    la shell o uno script di shell.  Quando una opzione richiede un "
+"argomento,\n"
+"    getopts posiziona tale argomento nella variabile di shell OPTARG.\n"
+"    \n"
+"    getopts riporta gli errori in uno o due modi.  Se il primo carattere "
+"della\n"
+"    STRINGAOPZ è un due punti, riporta gli errori in silenzio.  In questa\n"
+"    modalità non vengono stampati messaggi di errore.  Se viene riscontrata "
+"una\n"
+"    opzione non valida, getopts posiziona il carattere di opzione trovato "
+"in\n"
+"    ARGOPZ.  Se un argomento richiesto non viene trovato, getopts posiziona\n"
+"    un \":\" nel NOME e imposta ARGOPZ al carattere di opzione trovato.  Se "
+"getopts\n"
+"    non è in modalità silenziosa e viene riscontrata una opzione non valida, "
+"getopts\n"
+"    posiziona \"?\" nel NOME e azzera ARGOPZ.  Se un argomento richiesto non "
+"viene\n"
+"    trovato, viene posizionato un \"?\" nel NOME, ARGOPZ viene azzerato e "
+"viene stampato\n"
+"    un messaggio diagnostico.\n"
+"    \n"
+"    Se il valore della variabile di shell ERROPZ è pari a 0, getopts "
+"disabilita\n"
+"    la stampa dei messaggi di errore anche se il primo carattere della "
+"STRINGAOPZ\n"
+"    non è un due punti.  Il valore predefinito di ERROPZ è pari a 1.\n"
+"    \n"
+"    Getopts normalmente analizza i parametri posizionali ($0 - $9), ma se\n"
+"    vengono forniti più argomenti, vengono analizzati questi ultimi.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo se viene trovata una opzione, insuccesso se viene "
+"raggiunta\n"
+"    la fine delle opzioni o viene riscontrato un errore."
+
+#: builtins.c:694
+#, fuzzy
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"Sostituisce la shell con il comando fornito.\n"
+"    \n"
+"    Esegue il COMANDO, sostituendo questa shell con il programma "
+"specificato.\n"
+"    Gli ARGOMENTI diventano gli argomenti per il COMANDO. Se il COMANDO non "
+"è specificato,\n"
+"    ogni redirezione avrà effetto nella shell corrente.\n"
+"    \n"
+"    Opzioni:\n"
+"      -a nome\tPassa NOME come l'argomento zero per il COMANDO\n"
+"      -c\t\tEsegue il COMANDO con un ambiente vuoto\n"
+"      -l\t\tPosiziona un trattino nell'argomento zero per il COMANDO\n"
+"    \n"
+"    Se il comando non può essere eseguito una shell non interattiva esce, a "
+"meno che\n"
+"    non venga impostata l'opzione di shell \"execfail\".\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che non sia trovato il COMANDO o si "
+"riscontri un errore di ridirezione."
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Esce dalla shell.\n"
+"    \n"
+"    Esce dalla shell con uno stato N. Se N è omesso lo stato di uscita\n"
+"    è quello dell'ultimo comando eseguito."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Esce da una shell di login.\n"
+"    \n"
+"    Esce da una shell di login con stato di uscita N. Restituisce un errore "
+"se non eseguito\n"
+"    in una shell di login."
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"Visualizza o esegue comandi dall'elenco della cronologia.\n"
+"    \n"
+"    fc è usato per elencare, modificare e rieseguire comandi dall'elenco "
+"della cronologia.\n"
+"    PRIMO e ULTIMO possono essere numeri che specificano l'intervallo oppure "
+"PRIMO può\n"
+"    essere una stringa, nel qual caso significa il comando più recente che "
+"inizia con\n"
+"    quella stringa.\n"
+"    \n"
+"    Opzioni:\n"
+"      -e EDITOR\tSeleziona l'editor da usare.  Il predefinito è FCEDIT, "
+"quindi EDITOR,\n"
+"    \t\tinfine vi\n"
+"      -l \tElenca le righe invece di modificarle\n"
+"      -n\tOmette i numeri di riga nell'elencare i comandi\n"
+"      -r\tInverte l'ordine delle righe (elenca prima le più recenti)\n"
+"    \n"
+"    Con il formato \"fc -s [pat=rep ...] [comando]\", il COMANDO è\n"
+"    rieseguito dopo aver effettuato la sostituzione VECCHIO=NUOVO.\n"
+"    \n"
+"    Un alias utile da usare insieme è r=\"fc -s\", in modo che digitando \"r "
+"cc\"\n"
+"    viene eseguito l'ultimo comando che inizia con \"cc\" e digitando \"r\" "
+"riesegue\n"
+"    l'ultimo comando.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo o lo stato del comando eseguito, non zero se si "
+"riscontra un errore."
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Sposta i job in primo piano.\n"
+"    \n"
+"    Mette il job identificato da SPEC_JOB in primo piano, rendendolo il\n"
+"    job corrente.  Se SPEC_JOB non è presente, viene usata la nozione di\n"
+"    job corrente della shell.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Stato del comando messo in primo piano, o insuccesso se si riscontra un "
+"errore."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Sposta i job sullo sfondo.\n"
+"    \n"
+"    Mette il  jobs identificato da ogni SPEC_JOB sullo sfondo, come se "
+"fossero\n"
+"    stati avviati con \"&\". Se SPEC_JOB non è presente, viene usata la "
+"nozione\n"
+"    di job corrente della shell.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che il controllo dei job non sia abilitato o "
+"si riscontri un errore."
+
+#: builtins.c:793
+#, fuzzy
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"Ricorda o visualizza le posizioni dei programmi.\n"
+"    \n"
+"    Determina e ricorda il nome completo di percorso per ogni comando NOME. "
+"Se non\n"
+"    viene fornito alcun argomento, sono visualizzate le informazioni sui "
+"comandi memorizzati.\n"
+"    \n"
+"    Opzioni:\n"
+"      -d\t\tDimentica la posizione memorizzata di ogni NOME\n"
+"      -l\t\tVisualizza in un formato che può essere riusato come input\n"
+"      -p nomepercorso\tUsa NOMEPERCORSO come il nome completo di percorso "
+"per NOME\n"
+"      -r\t\tDimentica tutte le posizioni memorizzate\n"
+"      -t\t\tStampa la posizione memorizzata di ogni NOME, facendo\n"
+"    \t\tprecedere ciascuna posizione con il NOME corrispondente se vengono\n"
+"    \t\tforniti valori NOME multipli\n"
+"    Argomenti:\n"
+"      NOME\t\tOgni NOME è ricercato in $PATH e aggiunto all'elenco\n"
+"    \t\tdei comandi memorizzati.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che non sia trovato NOME o sia fornita una "
+"opzione non valida."
+
+#: builtins.c:818
+#, fuzzy
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Visualizza informazioni sui comandi interni.\n"
+"    \n"
+"    Visualizza un breve sommario dei comandi interni. Se viene specificato "
+"il\n"
+"    MODELLO fornisce un aiuto dettagliato su tutti i comandi corrispondenti "
+"al\n"
+"    MODELLO, altrimenti viene stampato l'elenco degli argomenti di aiuto.\n"
+"    \n"
+"    Opzioni:\n"
+"      -d\tVisualizza una breve descrizione per ciascun argomento\n"
+"      -m\tVisualizza l'uso in formato pseudo manpage\n"
+"      -s\tVisualizza solo una breve sintassi sull'uso per ciascun argomento "
+"che\n"
+"    \tcorrisponde al MODELLO\n"
+"    \n"
+"    Argomenti:\n"
+"      MODELLO\tModello che specifica un argomento di aiuto\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che non venga trovato il MODELLO o sia "
+"fornita una opzione non valida."
+
+#: builtins.c:842
+#, fuzzy
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Visualizza o manipola l'elenco della cronologia.\n"
+"    \n"
+"    Visualizza l'elenco della cronologia con i numeri di riga, aggiungendo a "
+"ciascuna voce\n"
+"    modificata il prefisso \"*\".  Un argomento pari a N elenca solo le "
+"ultime N voci.\n"
+"    \n"
+"    Opzioni:\n"
+"      -c\tPulisce la cronologia eliminando tutte le voci\n"
+"      -d posiz\tElimina la voce della cronologia alla posizione POSIZ.\n"
+"    \n"
+"      -a\tAccoda righe al file della cronologia relative alla sessione "
+"attuale\n"
+"      -n\tLegge tutte le righe non ancora lette dal file della cronologia\n"
+"      -r\tLegge il file della cronologia e ne accoda il contenuto all'elenco "
+"della\n"
+"    \t\tcronologia\n"
+"      -w\tScrive la cronologia corrente nel file della cronologia\n"
+"    \t\te ne accoda le voci all'elenco della cronologia\n"
+"    \n"
+"      -p\tEffettua l'espansione della cronologia su ciascun ARG e visualizza "
+"il\n"
+"    \t\trisultato senza memorizzarlo nell'elenco della cronologia\n"
+"      -s\tAccoda gli ARG all'elenco della cronologia come una voce singola\n"
+"    \n"
+"    Se viene fornito il NOMEFILE, viene usato come file della cronologia.  "
+"Altrimenti,\n"
+"    se presente, viene usato il valore di $HISTFILE, in alternativa ~/."
+"bash_history.\n"
+"    \n"
+"    Se la variabile $HISTTIMEFORMAT è impostata e non è nulla, il suo valore "
+"viene usato\n"
+"    come una stringa di formato per strftime(3) per stampare l'orario "
+"associato a ciascuna\n"
+"    voce di cronologia visualizzata.  Altrimenti non viene stampato alcun "
+"orario.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che non sia fornita una opzione non valida o "
+"si riscontri un errore."
+
+#: builtins.c:879
+#, fuzzy
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"Visualizza lo stato dei job.\n"
+"    \n"
+"    Elenca i job attivi. SPECJOB limita l'output a quei job.\n"
+"    Senza opzioni, è visualizzato lo stato di tutti i job attivi.\n"
+"    \n"
+"    Opzioni:\n"
+"      -l\tElenca gli ID dei processi in aggiunta alle normali informazioni\n"
+"      -n\tElenca solo i processi che hanno cambiato stato dall'ultima\n"
+"    \tnotifica\n"
+"      -p\tElenca solo l'ID dei processi\n"
+"      -r\tLimita l'output ai job in esecuzione\n"
+"      -s\tLimita l'output ai processi fermati\n"
+"    \n"
+"    Se viene fornito -x, il COMANDO è eseguito dopo che tutte le specifiche "
+"dei job che\n"
+"    appaiono in ARGOMENTI sono state rimpiazzate con l'ID del processo "
+"leader nel gruppo di\n"
+"    quel job.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che non sia fornita una opzione non valida o "
+"si riscontri un errore.\n"
+"    Se viene usato -x, restituisce lo stato di uscita del COMANDO."
+
+#: builtins.c:906
+#, fuzzy
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"Rimuove job dalla shell corrente.\n"
+"    \n"
+"    Rimuove ciascun argomento SPECJOB dalla tabella dei job attivi.  Senza "
+"alcun\n"
+"    SPECJOB, la shell usa la sua nozione del job corrente.\n"
+"    \n"
+"    Opzioni:\n"
+"      -a\tRimuove tutti i job se non viene fornito uno SPECJOB\n"
+"      -h\tMarca ciascun SPECJOB in modo che non venga inviato un SIGHUP al "
+"job se la\n"
+"    \tshell lo riceve\n"
+"      -r\tRimuove solo i job in esecuzione\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che non venga fornita una opzione non valida "
+"o uno SPECJOB."
+
+#: builtins.c:925
+#, fuzzy
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Invia un segnale a un job.\n"
+"    \n"
+"    Invia il segnale chiamato dallo SPECSEGN o dal NUMSEGN ai processi "
+"identificati\n"
+"    dal PID o dallo SPECJOB.  Se non è presente né lo SPECSEGN né il "
+"NUMSEGN, viene\n"
+"    allora considerato SIGTERM.\n"
+"    \n"
+"    Opzioni:\n"
+"      -s segn\tSEGN è il nome di un segnale\n"
+"      -n segn\tSEGN è il numero di un segnale\n"
+"      -l\tElenca i nomi dei segnali; Se ci sono argomenti dopo \"-l\"\n"
+"    \tvengono valutati come numeri di segnale di cui elencare i nomi\n"
+"    \n"
+"    Kill è un comando interno di shell per due ragioni: permette di usare "
+"gli ID\n"
+"    dei job invece degli ID dei processi e permette di uccidere quei "
+"processi che\n"
+"    abbiano raggiunto un numero limite prefissato di processi creabili.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che non sia fornita una opzione non valida o "
+"si riscontri un errore."
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"Valuta espressioni aritmetiche.\n"
+"    \n"
+"    Valuta ciascun ARG come una espressione aritmetica.  La valutazione è "
+"effettuata con\n"
+"    interi a larghezza fissa senza alcun controllo per overflow, sebbene la "
+"divisione\n"
+"    per 0 sia bloccata e contrassegnata come un errore.  Il seguente elenco "
+"di operatori\n"
+"    è raggruppato per livelli di operatore di uguale precedenza.  I livelli "
+"sono elencati\n"
+"    in ordine di precedenza decrescente.\n"
+"    \n"
+"    \tid++, id--\tIncremento e decremento successivo di variabile\n"
+"    \t++id, --id\tIncremento e decremento precedente di variabile\n"
+"    \t-, +\t\tMeno e più unari\n"
+"    \t!, ~\t\tNegazione logica e bit a bit\n"
+"    \t**\t\tEsponenziazione\n"
+"    \t*, /, %\t\tMoltiplicazione, divisione, resto\n"
+"    \t+, -\t\tAddizione, sottrazione\n"
+"    \t<<, >>\t\tScorrimento bit a bit sinistro e destro\n"
+"    \t<=, >=, <, >\tComparazione\n"
+"    \t==, !=\t\tUguaglianza, disuguaglianza\n"
+"    \t&\t\tAND bit a bit\n"
+"    \t^\t\tXOR bit a bit\n"
+"    \t|\t\tOR bit a bit\n"
+"    \t&&\t\tAND logico\n"
+"    \t||\t\tOR logico\n"
+"    \tespr ? espr : espr\n"
+"    \t\t\tOperatore condizionale\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tAssegnazione\n"
+"    \n"
+"    Le variabili di shell sono ammesse come operandi.  Il nome della "
+"variabile è\n"
+"    sostituito dal suo valore (forzato a un intero a larghezza fissa) "
+"all'interno\n"
+"    di una espressione.  Non è necessario che la variabile abbia il proprio "
+"attributo\n"
+"    intero abilitato per essere usata in una espressione.\n"
+"    \n"
+"    Gli operatori sono valutati in ordine di precedenza.  Le "
+"sottoespressioni tra\n"
+"    parentesi sono valutate per prime e possono avere la precedenza sulle "
+"regole\n"
+"    sopradescritte.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Se l'ultimo ARG viene valutato pari a 0 restituisce 1, altrimenti "
+"restituisce 0."
+
+#: builtins.c:994
+#, fuzzy
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"Legge una riga dallo standard input e la divide in campi.\n"
+"    \n"
+"    Legge una singola riga dallo standard input o, se viene fornita "
+"l'opzione -u,\n"
+"    dal descrittore di file FD.  La riga è divisa in campi corrispondenti a\n"
+"    parole dove la prima parola è assegnata al primo NOME, la seconda "
+"parola\n"
+"    al secondo NOME e così via, con ciascuna parola rimanente assegnata al\n"
+"    corrispondente ultimo NOME.  Sono riconosciuti come delimitatori di "
+"parola\n"
+"    solo quelli presenti in $IFS.\n"
+"    \n"
+"    Se non viene fornito alcun NOME, la riga letta è memorizzata nella "
+"variabile REPLY.\n"
+"    \n"
+"    Opzioni:\n"
+"      -a array\tAssegna le parole lette agli indici sequenziali della "
+"variabile\n"
+"    \t\tdi ARRAY, iniziando da zero\n"
+"      -d delim\tContinua fino alla lettura del primo carattere di DELIM, "
+"invece\n"
+"    \t\tdi un ritorno a capo \n"
+"      -e\t\tUsa Readline per ottenere la riga in una shell interattiva\n"
+"      -i testo\tUsa TESTO come testo iniziale per Readline\n"
+"      -n ncarat\tRitorna dopo la lettura di NCARAT caratteri invece di "
+"attendere\n"
+"    \t\tun a capo, ma rispetta un delimitatore se vengono letti meno di\n"
+"    \t\tNCARAT caratteri prima del delimitatore stesso\n"
+"      -N ncarat\tRitorna solo dopo la lettura di NCARAT caratteri esatti, a "
+"meno che non si\n"
+"    \t\triscontri un EOF o un time out di lettura, ignorando qualsiasi "
+"delimitatore\n"
+"      -p stringa\tVisualizza la stringa PROMPT senza un a capo finale prima\n"
+"    \t\tdel tentativo di lettura\n"
+"      -r\t\tNon ammette backslash per fare l'escape dei caratteri\n"
+"      -s\t\tNon fa l'echo dell'input proveniente da un terminale\n"
+"      -t secondi\tVa in timeout e restituisce insuccesso se non viene letta "
+"una\n"
+"    \t\triga di input completa entro i SECONDI forniti.  Il valore della\n"
+"    \t\tvariabile TMOUT è il timeout predefinito.  SECONDI può essere\n"
+"    \t\tuna frazione.  Se SECONDI è pari a 0, la lettura restituisce "
+"successo\n"
+"    \t\tsolo se l'input è disponibile sul descrittore di file specificato.  "
+"Lo\n"
+"    \t\tstato di uscita è maggiore di 128 se viene superato il timeout\n"
+"      -u fd\t\tLegge dal descrittore di file FD invece che dallo standard "
+"input\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Il codice restituito è zero a meno che non sia riscontrato un EOF, un "
+"timeout in lettura\n"
+"    o venga fornito un descrittore di file non valido come argomento per -u."
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"Ritorna da una funzione di shell.\n"
+"    \n"
+"    Causa l'uscita da una funzione o da uno script sorgente con il valore "
+"di\n"
+"    ritorno specificato da N.  Se N è omesso, lo stato di ritorno è quello\n"
+"    dell'ultimo comando eseguito all'interno della funzione o dello script.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce N, oppure insuccesso se la shell non sta eseguendo una "
+"funzione o uno script."
+
+#: builtins.c:1054
+#, fuzzy
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"Imposta o azzera i valori delle opzioni di shell e dei parametri "
+"posizionali.\n"
+"    \n"
+"    Cambia il valore degli attributi di shell e dei parametri posizionali, "
+"o\n"
+"    visualizza i nomi e i valori delle variabili di shell.\n"
+"    \n"
+"    Opzioni:\n"
+"      -a  Marca le variabili che sono modificate o create per "
+"l'esportazione.\n"
+"      -b  Notifica immediatamente della terminazione di un job.\n"
+"      -e  Esce immediatamente se un comando esce con uno stao diverso da "
+"zero.\n"
+"      -f  Disabilita la generazione dei nomi file (globbing).\n"
+"      -h  Ricorda la posizione dei comandi quando vengono cercati.\n"
+"      -k  Tutte le assegnazioni degli argomenti sono posizionate "
+"nell'ambiente per un\n"
+"          comando, non solo quelle che precedono il nome del comando "
+"stesso.\n"
+"      -m  Abilita il controllo dei job.\n"
+"      -n  Legge i comandi senza eseguirli.\n"
+"      -o nome-opzione\n"
+"          Imposta la variabile corrispondente al nome dell'opzione:\n"
+"              allexport    Uguale a -a\n"
+"              braceexpand  Uguale a -B\n"
+"              emacs        Usa una interfaccia di modifica righe di stile "
+"emacs\n"
+"              errexit      Uguale a -e\n"
+"              errtrace     Uguale a -E\n"
+"              functrace    Uguale a -T\n"
+"              hashall      Uguale a -h\n"
+"              histexpand   Uguale a -H\n"
+"              history      Abilita la cronologia comandi\n"
+"              ignoreeof    Non esce dalla shell dopo aver raggiunto EOF\n"
+"              interactive-comments\n"
+"                           Permette ai commenti di comparire nei comandi "
+"interattivi\n"
+"              keyword      Uguale a -k\n"
+"              monitor      Uguale a -m\n"
+"              noclobber    Uguale a -C\n"
+"              noexec       Uguale a -n\n"
+"              noglob       Uguale a -f\n"
+"              nolog        Accettato al momento ma ignorato\n"
+"              notify       Uguale a -b\n"
+"              nounset      Uguale a -u\n"
+"              onecmd       Uguale a -t\n"
+"              physical     Uguale a -P\n"
+"              pipefail     Il valore restituito da una pipeline è lo stato\n"
+"                           dell'ultimo comando che esce con uno stato "
+"diverso da zero,\n"
+"                           oppure zero se nessun comando esce con uno stato "
+"diverso da zero\n"
+"              posix        Modifica il comportamento di bash dove "
+"l'operazione\n"
+"                           predefinita è diversa dallo standard Posix per "
+"rispettare\n"
+"                           lo standard stesso\n"
+"              privileged   Uguale a -p\n"
+"              verbose      Uguale a -v\n"
+"              vi           Usa un'editor di riga stile vi\n"
+"              xtrace       Uguale a -x\n"
+"      -p  Abilitato ogni qualvolta gli id utente reali non corrispondono a "
+"quelli effettivi.\n"
+"          Disabilita l'analisi del file $ENV e l'importazione delle funzioni "
+"di\n"
+"          shell.  Disabilitare questa opzione comporta l'impostazione degli\n"
+"          uid e gid effettivi a uid e gid reali.\n"
+"      -t  Esce dopo la lettura e l'esecuzione di un comando.\n"
+"      -u  Tratta le variabili non impostate come un errore durante la "
+"sostituzione.\n"
+"      -v  Stampa le righe di input della shell mentre vengono lette.\n"
+"      -x  Stampa i comandi e i loro argomenti mentre vengono eseguiti.\n"
+"      -B  La shell effettua l'espansione delle parentesi graffe\n"
+"      -C  Se impostata, non permette la sovrascrittura dei file regolari "
+"esistenti\n"
+"          da parte della redirezione dell'output.\n"
+"      -E  Se impostata, la trap ERR è ereditata dalle funzioni di shell.\n"
+"      -H  Abilita la sostituzione per la cronologia stile !.  Questo flag è "
+"abilitato\n"
+"          in modo predefinito quando la shell è interattiva.\n"
+"      -P  Se impostata, non segue i link simbolici quando vengono eseguiti "
+"dei comandi\n"
+"          come cd, il quale cambia la directory corrente.\n"
+"      -T  Se impostata, la trap DEBUG è ereditata dalle funzioni di shell.\n"
+"      --  Assegna tutti gli argomenti rimasti ai parametri posizionali.\n"
+"          Se non sono rimasti argomenti, i parametri posizionali\n"
+"          vengono azzerati.\n"
+"      -   Assegna tutti gli argomenti rimasti ai parametri posizionali.\n"
+"          Le opzioni -x e -v sono disabilitate.\n"
+"    \n"
+"    Usando + al posto di - questi flag vengono disabilitati.  I\n"
+"    flag possono anche essere usati subito dopo l'invocazione della shell.  "
+"Il set corrente\n"
+"    dei flag può essere trovato in $-.  I restanti n ARG sono parametri\n"
+"    posizionali e vengono assegnati, in ordine, a $1, $2, .. $n.  Se non\n"
+"    vengono forniti ARG, vengono stampate tutte le variabili di shell.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che non venga fornita una opzione non valida."
+
+#: builtins.c:1139
+#, fuzzy
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"Azzera i valori e gli attributi delle variabili e delle funzioni di shell.\n"
+"    \n"
+"    Per ciascun NOME, rimuove la corrispondente variabile o funzione.\n"
+"    \n"
+"    Opzioni:\n"
+"      -f\tConsidera ciascun NOME come una funzione di shell\n"
+"      -v\tConsidera ciascun NOME come una variabile di shell\n"
+"    \n"
+"    Senza opzioni, unset prova prima ad azzerare una variabile e, in caso di "
+"insuccesso,\n"
+"    prova ad azzerare una funzione.\n"
+"    \n"
+"    Alcune variabili non possono essere azzerate; vedere anche \"readonly"
+"\".\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che non sia fornita una opzione non valida o "
+"NOME sia in sola lettura."
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Imposta l'attributo di esportazione per le variabili di shell.\n"
+"    \n"
+"    Marca ciascun NOME per l'esportazione automatica all'ambiente dei "
+"comandi\n"
+"    eseguiti successivi.  Se è fornito un VALORE, lo assegna prima "
+"dell'esportazione.\n"
+"    \n"
+"    Opzioni:\n"
+"      -f\tRimanda alle funzioni di shell\n"
+"      -n\tRimuove la proprietà di esportazione da ciascun NOME\n"
+"      -p\tVisualizza un elenco di tutte le variabili e funzioni esportate\n"
+"    \n"
+"    L'argomento \"--\" disabilita l'elaborazione di ulteriori opzioni.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che non sia fornita una opzione non valida o "
+"il NOME non sia valido."
+
+#: builtins.c:1180
+#, fuzzy
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Marca la variabili di shell come non modificabili.\n"
+"    \n"
+"    Marca ciascun NOME in sola lettura; i valori di questi NOMI non possono\n"
+"    essere modificati da un assegnamento successivo.  Se viene fornito il\n"
+"     VALORE, lo assegna prima di marcarlo in sola lettura.\n"
+"    \n"
+"    Opzioni:\n"
+"      -a\tRimanda alle variabili degli array indicizzati\n"
+"      -A\tRimanda alle variabili degli array associativi\n"
+"      -f\tRimanda alle funzioni di shell\n"
+"      -p\tVisualizza un elenco di tutte le variabili e le funzioni in sola "
+"lettura\n"
+"    \n"
+"    Un argomento pari a \"--\" disabilita ulteriori analisi delle opzioni.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che non venga fornita una opzione non valida "
+"o NOME non sia valido."
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"Sposta i parametri posizionali.\n"
+"    \n"
+"    Rinomina i parametri posizionali $N+1,$N+2 ... a $1,$2 ...  Se N non\n"
+"    è fornito, viene assunto a 1.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che N non sia negativo o maggiore di $#."
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Esegue comandi da un file nella shell corrente.\n"
+"    \n"
+"    Legge ed esegue comandi da NOMEFILE nella shell corrente. Le voci\n"
+"    in $PATH sono usate per trovare la directory contenente il NOMEFILE.\n"
+"    Se vengono forniti ARGOMENTI, essi diventano i parametri di posizione\n"
+"    quando viene eseguito NOMEFILE.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce lo stato dell'ultimo comando eseguito in NOMEFILE; "
+"insuccesso se\n"
+"    il NOMEFILE non può essere letto."
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Sospende l'esecuzione della shell.\n"
+"    \n"
+"    Sospende l'esecuzione di questa shell fino a che non riceve un segnale "
+"SIGCONT.\n"
+"    A meno di forzature, le shell di login non possono essere sospese.\n"
+"    \n"
+"    Opzioni:\n"
+"      -f\tForza la sospensione, anche se in presenza di una shell di login\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che non sia abilitato il controllo job o si "
+"riscontri un errore."
+
+#: builtins.c:1261
+#, fuzzy
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"Analizza espressioni condizionali.\n"
+"    \n"
+"    Esce con stato 0 (vero) o 1 (falso) in base all'analisi\n"
+"    dell'ESPR.  Le espressioni possono essere unarie o binarie.  Le\n"
+"    espressioni unarie sono spesso usate per esaminare lo stato di un file.\n"
+"    Esistono anche operatori di stringa e di comparazione numerica.\n"
+"    \n"
+"    Il comportamento del test dipende dal numero degli argomenti.  Leggere\n"
+"    la pagina di manuale di bash per le specifiche complete.\n"
+"    \n"
+"    Operatori su file:\n"
+"    \n"
+"      -a FILE        Vero se il file esiste.\n"
+"      -b FILE        Vero se è un file speciale a blocchi.\n"
+"      -c FILE        Vero se è un file speciale a caratteri.\n"
+"      -d FILE        Vero se il file è una directory.\n"
+"      -e FILE        Vero se il file esiste.\n"
+"      -f FILE        Vero se il file esiste ed è un file regolare.\n"
+"      -g FILE        Vero se il file è un set-group-id.\n"
+"      -h FILE        Vero se il file è un link simbolico.\n"
+"      -L FILE        Vero se il file è un link simbolico.\n"
+"      -k FILE        Vero se il file ha il suo bit \"sticky\" impostato.\n"
+"      -p FILE        Vero se il file è una pipe con nome.\n"
+"      -r FILE        Vero se il file è leggibile dall' utente corrente.\n"
+"      -s FILE        Vero se il file esiste e non è vuoto.\n"
+"      -S FILE        Vero se il file è un socket.\n"
+"      -t FD          Vero se il descrittore di file è aperto su un "
+"terminale.\n"
+"      -u FILE        Vero se il file è un set-user-id.\n"
+"      -w FILE        Vero se il file è scrivibile dall'utente corrente.\n"
+"      -x FILE        Vero se il file è eseguibile dall'utente corrente.\n"
+"      -O FILE        Vero se l'utente corrente è il reale proprietario del "
+"file.\n"
+"      -G FILE        Vero se il gruppo dell'utente corrente è il reale "
+"proprietario del file.\n"
+"      -N FILE        Vero se il file è stato modificato dall'ultima volta "
+"che è stato letto.\n"
+"    \n"
+"      FILE1 -nt FILE2  Vero se il file1 è più recente del file2 (in accordo "
+"con la\n"
+"                       data di modifica).\n"
+"    \n"
+"      FILE1 -ot FILE2  Vero se il file1 è più vecchio del file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  Vero se il file1 è un link hardware al file2.\n"
+"    \n"
+"    Operatori di stringa:\n"
+"    \n"
+"      -z STRINGA     Vero se la stringa e vuota.\n"
+"    \n"
+"      -n STRINGA\n"
+"         STRINGA     Vero se la stringa non è vuota.\n"
+"    \n"
+"      STRINGA1 = STRINGA2\n"
+"                     Vero se le stringhe sono uguali.\n"
+"      STRINGA1 != STRINGA2\n"
+"                     Vero se le stringhe non sono uguali.\n"
+"      STRINGA1 < STRINGA2\n"
+"                     Vero se la STRINGA1 viene ordinata lessicograficamente "
+"prima della STRINGA2.\n"
+"      STRINGA1 > STRINGA2\n"
+"                     Vero se la STRINGA1 viene ordinata lessicograficamente "
+"dopo la STRINGA2.\n"
+"    \n"
+"    Altri operatori:\n"
+"    \n"
+"      -o OPZIONE     Vero se l'OPZIONE di shell è abilitata.\n"
+"      -v VAR\t Vero se la variabile di shell VAR è impostata.\n"
+"      ! ESPR         Vero se l'ESPR è falsa.\n"
+"      ESPR1 -a ESPR2 Vero se entrambe le espressioni espr1 E espr2 sono "
+"vere.\n"
+"      ESPR1 -o ESPR2 Vero se sono vere le espressioni espr1 O espr2.\n"
+"    \n"
+"      arg1 OP arg2   Test aritmetici.  OP è uno tra -eq, -ne,\n"
+"                     -lt, -le, -gt oppure -ge.\n"
+"    \n"
+"    Gli operatori aritmetici binari restituiscono vero se ARG1 è uguale, non "
+"uguale,\n"
+"    più piccolo di, più piccolo o uguale, più grande di o più grande o "
+"uguale\n"
+"    ad ARG2.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo se l'ESPR viene valutata vera; insuccesso se l'ESPR "
+"viene valutata\n"
+"    falsa o viene fornito un argomento non valido."
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Valuta l'espressione condizionale.\n"
+"    \n"
+"    Questo è un sinonimo del comando interno \"test\", ma l'ultimo argomento "
+"deve\n"
+"    essere un \"]\" letterale per corrispondere al \"[\" di apertura."
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Visualizza le durate dei processi.\n"
+"    \n"
+"    Stampa i tempi utente e di sistema accumulati per la shell e per tutti "
+"i\n"
+"    relativi processi figli.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Sempre successo."
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"Esegue il trap dei segnali e di altri eventi.\n"
+"    \n"
+"    Definisce e attiva i gestori da eseguire quando la shell riceve segnali\n"
+"    o altre condizioni.\n"
+"    \n"
+"    ARG è un comando da leggere ed eseguire quando la shell riceve il o i\n"
+"    segnali SPEC_SEGNALE.  Se ARG o \"-\" non sono presenti (e viene "
+"fornito\n"
+"    un singolo SPEC_SEGNALE), ciascun segnale specificato è riportato\n"
+"    al suo valore originario.  Se ARG è pari a null, ogni SPEC_SEGNALE è\n"
+"    ignorato dalla shell e dai comandi che invoca.\n"
+"    \n"
+"    Se uno SPEC_SEGNALE è EXIT (0) ARG viene eseguito all'uscita dalla "
+"shell.  Se\n"
+"    lo SPEC_SEGNALE è DEBUG, ARG viene eseguito prima di ogni comando "
+"semplice.  Se\n"
+"    uno SPEC_SEGNALE è RETURN, ARG viene eseguito al termine di ogni "
+"esecuzione\n"
+"    di una funzione di shell o di uno script avviato dai comandi interni . o "
+"source.\n"
+"    Un SPEC_SEGNALE di ERR significa eseguire ARG ogni volta che un errore "
+"di comando\n"
+"    causi l'uscita della shell quando è abilitata l'opzione -e.\n"
+"    \n"
+"    Se non vengono forniti argomenti, trap stampa l'elenco di comandi "
+"associati\n"
+"    a ciascun segnale.\n"
+"    \n"
+"    Ozioni:\n"
+"      -l\tStampa un elenco di nomi di segnale e i loro corrispondenti "
+"numeri\n"
+"      -p\tVisualizza i comandi trap associati a ciascun SPEC_SEGNALE\n"
+"    \n"
+"    Ciascun SPEC_SEGNALE è un nome di segnale in <signal.h> oppure un numero "
+"di segnale.\n"
+"    I nomi di segnale sono case insensitive e il prefisso SIG è opzionale.  "
+"Per\n"
+"    inviare un segnale alla shell usare \"kill -signal $$\".\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che SPEC_SEGNALE non sia valido o si "
+"fornisca una opzione non valida."
+
+#: builtins.c:1400
+#, fuzzy
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"Visualizza informazioni sul tipo di comando.\n"
+"    \n"
+"    Per ciascun NOME, indica come sarebbe interpretato se fosse usato come\n"
+"    un nome di comando.\n"
+"    \n"
+"    Opzioni:\n"
+"      -a\tVisualizza tutte le posizioni contenenti un eseguibile chiamato "
+"NOME,\n"
+"    \tincludendo alias, comandi interni e funzioni se e solo se\n"
+"    \tnon viene usata anche l'opzione \"-p\"\n"
+"      -f\tNon esegue la ricerca delle funzioni di shell\n"
+"      -P\tForza una ricerca del PERCORSO per ciascun NOME anche se è un "
+"alias,\n"
+"    \tun comando interno o una funzione, e restituisce il nome del file su "
+"disco\n"
+"    \tche sarebbe eseguito\n"
+"      -p\tRestituisce o il nome del file su disco che sarebbe eseguito,\n"
+"    \toppure niente se \"type -t NOME\" non restituisce \"file\".\n"
+"      -t\tVisualizza una singola parola che è una tra \"alias\", \"keyword"
+"\",\n"
+"    \t\"function\", \"builtin\", \"file\" or \"\", se il NOME è "
+"rispettivamente un alias,\n"
+"    \tuna parola riservata di shell, una funzione di shell, un comando "
+"interno di shell,\n"
+"    \tun file su disco o non trovato\n"
+"    \n"
+"    Argomenti:\n"
+"      NOME\tIl nome del comando da interpretare.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo se tutti i NOMI vengono trovati; insuccesso in caso "
+"contrario."
+
+#: builtins.c:1431
+#, fuzzy
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Modifica i limiti delle risorse di shell.\n"
+"    \n"
+"    Fornisce il controllo sulle risorse disponibili per la shell e per i "
+"processi\n"
+"    che crea, sui sistemi che permettono tale controllo.\n"
+"    \n"
+"    Opzioni:\n"
+"      -S\tUsa il limite di risorse \"leggero\"\n"
+"      -H\tUsa il limite di risorse \"pesante\"\n"
+"      -a\tRiporta tutti i limiti correnti\n"
+"      -b\tLa dimensione del buffer del socket\n"
+"      -c\tLa dimensione massima dei file di core creati\n"
+"      -d\tLa dimensione massima di un segmento di dati di processo\n"
+"      -e\tLa priorità massima di scheduling (\"nice\")\n"
+"      -f\tLa dimensione massima dei file scritti dalla shell e dai suoi "
+"figli\n"
+"      -i\tIl numero massimo di segnali pendenti\n"
+"      -l\tLa dimensione massima di memoria che un processo può impegnare\n"
+"      -m\tIl numero massimo di set residenti\n"
+"      -n\tIl numero massimo di descrittori di file aperti\n"
+"      -p\tLa dimensione del buffer della pipe\n"
+"      -q\tIl numero massimo di byte nelle code messaggi POSIX\n"
+"      -r\tLa priorità massima di scheduling in tempo reale\n"
+"      -s\tLa dimensione massima dello stack\n"
+"      -t\tLa quantità massima di tempo CPU in secondi\n"
+"      -u\tIl numero massimo di processi utente\n"
+"      -v\tLa dimensione della memoria virtuale\n"
+"      -x\tIl numero massimo di lock dei file\n"
+"    \n"
+"    Se viene fornito un LIMITE, sarà il nuovo valore della risorsa "
+"specificata;\n"
+"    I valori LIMITE speciali \"soft\", \"hard\" e \"unlimited\" "
+"corrispondono\n"
+"    rispettivamente agli attuali limiti leggero, pesante e senza limite.\n"
+"    Altrimenti viene stampato il valore attuale della risorsa specificata.  "
+"Se\n"
+"    non viene fornita alcuna opzione, viene assunta -f.\n"
+"    \n"
+"    I valori sono ad incrementi di 1024-byte, ad eccezione di -t che è in "
+"secondi,\n"
+"    -p che è ad incrementi di 512 byte e -u che è un numero di processi non\n"
+"    scalato.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che non venga fornita una opzione non valida "
+"o venga riscontrato un errore."
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"Visualizza o imposta la maschera del modo file.\n"
+"    \n"
+"    Imposta la maschera di creazione file dell'utente su MODO.  Se MODO "
+"viene omesso, stampa\n"
+"    il valore corrente della maschera.\n"
+"    \n"
+"    Se MODO inizia con una cifra, è interpretato con un numero ottale;\n"
+"    altrimenti come una stringa di modo simbolico come quella accettata da "
+"chmod(1).\n"
+"    \n"
+"    Opzioni:\n"
+"      -p\tSe MODO viene omesso, mostra in una forma che possa essere riusata "
+"come input\n"
+"      -S\tRende simbolico l'output; altrimenti viene mostrato un numero "
+"ottale\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che MODO non sia valido o venga fornita una "
+"opzione non valida."
+
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"Attende il completamento del job restituendo lo stato di uscita.\n"
+"    \n"
+"    Attende il processo identificato dall'ID, che può essere un ID di "
+"processo o\n"
+"    una specifica di job, riportando il suo stato di termine.  Se non è\n"
+"    fornito un ID, attende tutti i processi figlio correntemente attivi, "
+"restituendo\n"
+"    zero come stato.  Se l'ID è una specifica di job, attende tutti i "
+"processi\n"
+"    presenti nella pipeline del job.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce lo stato dell'ID; insuccesso se l'ID non è valido o viene "
+"fornita una\n"
+"    opzione non valida."
+
+#: builtins.c:1533
+#, fuzzy
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"Attende il completamento del processo e restituisce lo stato di uscita.\n"
+"    \n"
+"    Attende per il processo specificato e riporta il suo stato di "
+"terminazione.  Se non\n"
+"    viene fornito il PID, l'attesa comprende tutti i processi figlio "
+"correntemente attivi\n"
+"    e il codice restituito è zero.  Il PID deve essere un ID di processo.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce lo stato dell'ID; insuccesso se l'ID non è valido o viene "
+"fornita una opzione non\n"
+"    valida."
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Esegue comandi per ciascun membro di un elenco.\n"
+"    \n"
+"    Il ciclo \"for\" esegue una sequenza di comandi per ciascun membro di "
+"un\n"
+"    elenco di voci.  Se \"in PAROLE ...;\" non è presente, allora viene "
+"assunto\n"
+"    \"in \"$@\"\".  Per ciascun elemento in PAROLE, NOME è impostato a "
+"quell'elemento e\n"
+"    i COMANDI vengono eseguiti.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce lo stato dell'ultimo comando eseguito."
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Ciclo \"for\" aritmetico.\n"
+"    \n"
+"    Equivalente a\n"
+"    \t(( ESPR1 ))\n"
+"    \twhile (( ESPR2 )); do\n"
+"    \t\tCOMANDI\n"
+"    \t\t(( ESPR3 ))\n"
+"    \tdone\n"
+"    ESPR1, ESPR2 e ESPR3 sono espressioni aritmetiche.  Se viene omessa "
+"qualche\n"
+"    espressione, si comporta come se valesse 1.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce lo stato dell'ultimo comando eseguito."
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Seleziona le parole da un elenco ed esegue i comandi.\n"
+"    \n"
+"    Le PAROLE vengono estese, generando un elenco di parole.  L'insieme\n"
+"    di parole estese viene stampato sullo standard error, ognuna delle\n"
+"    quali preceduta da un numero.  Se non è presente \"in PAROLE\", viene\n"
+"    assunto `in \"$@\".  Viene poi visualizzato il prompt PS3 e viene letta\n"
+"    una riga dallo standard input.  Se la riga è composta dal numero che\n"
+"    corrisponde a una delle parole visualizzate, NOME è impostato a quella\n"
+"    parola.  Se la riga è vuota, Le PAROLE e il prompt vengono "
+"rivisualizzati.\n"
+"    Se viene letto EOF, il comando termina.  Se vengono letti altri valori\n"
+"    NOME viene impostato a null.  La riga letta viene salvata nella "
+"variabile\n"
+"    REPLY.  I COMANDI vengono eseguiti dopo ogni selezione finché non viene\n"
+"    eseguito un comando di interruzione.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce lo stato di uscita dell'ultimo comando eseguito."
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"Riporta il tempo speso nell'esecuzione della pipeline.\n"
+"    \n"
+"    Esegue la PIPELINE e stampa, quando termina, un sommario del tempo "
+"reale, tempo utente della CPU\n"
+"    e tempo di sistema della CPU dedicato all'esecuzione della PIPELINE.\n"
+"    \n"
+"    Opzioni:\n"
+"      -p\tStampa il riepilogo dei tempi nel formato portabile Posix format\n"
+"    \n"
+"    Il valore della variabile TIMEFORMAT è usato come formato di output.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Viene restituito lo stato della PIPELINE."
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Esegue comandi basati sulla corrispondenza di modello.\n"
+"    \n"
+"    Esegue in modo selettivo COMANDI basati sulla PAROLA corrispondente al "
+"MODELLO.  Il\n"
+"    carattere \"|\" è usato per separare modelli multipli.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce lo stato dell'ultimo comando eseguito."
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Esegue comandi basati su condizioni.\n"
+"    \n"
+"    Viene eseguito l'elenco degli \"if COMANDI\".  Se lo stato di uscita è "
+"zero\n"
+"    viene eseguito l'elenco \"then COMANDI\", altrimenti viene eseguito "
+"l'elenco\n"
+"    degli \"elif COMANDI\" e, se il loro stato è zero, viene eseguito "
+"l'elenco dei\n"
+"    \"then COMANDI\" corrispondente e viene completato l'\"if COMANDO\".  "
+"Altrimenti,\n"
+"    viene eseguito l'elenco \"else COMANDI\", se presente.  Lo stato di "
+"uscita\n"
+"    dell'intero costrutto corrisponde a quello dell'ultimo comando eseguito, "
+"o\n"
+"    zero se nessuna condizione provata è vera.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce lo stato dell'ultimo comando eseguito."
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Esegue i comandi finché un test ha successo.\n"
+"    \n"
+"    Espande ed esegue i COMANDI fino a quando il comando finale nei\n"
+"    COMANDI \"while\" ha uno stato di uscita pari a zero.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce lo stato dell'ultimo comando eseguito."
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Esegue i comandi finché un test non ha successo.\n"
+"    \n"
+"    Espande ed esegue i COMANDI fino a quando il comando finale nei\n"
+"    COMANDI \"until\" ha uno stato di uscita diverso da zero.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce lo stato dell'ultimo comando eseguito."
+
+#: builtins.c:1671
+#, fuzzy
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"Crea un coprocesso chiamato NOME.\n"
+"    \n"
+"    Esegue il COMANDO in modo asincrono, con lo standard output e lo "
+"standard\n"
+"    input del comando connessi attraverso una pipe ai descrittori di file "
+"assegnati\n"
+"    agli indici 0 e 1 di una variabile di array NOME nella shell in "
+"esecuzione.\n"
+"    Il NOME predefinito è \"COPROC\".\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce lo stato di uscita del COMANDO."
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"Definisce una funzione di shell.\n"
+"    \n"
+"    Crea una funzione di shell chiamata NOME.  Quando invocato come un "
+"semplice comando,\n"
+"    NOME esegue i COMANDI nel contesto delle chiamate di shell.  Quando "
+"viene invocato NOME,\n"
+"    gli argomenti sono passati alla funzione come $1...$n e il nome della "
+"funzione si trova\n"
+"    in $FUNCNAME.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che il NOME non sia in sola lettura."
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Raggruppa i comandi come un'unità.\n"
+"    \n"
+"    Esegue un set di comandi in un gruppo.  Questo è un modo per "
+"reindirizzare un\n"
+"    intero set di comandi.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce lo stato dell'ultimo comando eseguito."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"Ripristina un job in primo piano.\n"
+"    \n"
+"    Equivale all'argomento SPEC_JOB per il comando \"fg\".  Ripristina\n"
+"    un job fermato o sullo sfondo.  SPEC_JOB può specificare un nome\n"
+"    job o un numero di job.  SPEC_JOB seguito da \"&\" mette il job\n"
+"    sullo sfondo, come se la specifica del job fosse stata fornita\n"
+"    come argomento per \"bg\".\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce lo stato del job ripristinato."
+
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Valuta espressioni aritmetiche.\n"
+"    \n"
+"    L'ESPRESSIONE è valutata seguendo le regole di valutazione\n"
+"    aritmetica. Equivalente a \"let ESPRESSIONE\".\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce 1 se ESPRESSIONE è valutata 0, altrimenti restituisce 0."
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"Esegue comandi condizionali.\n"
+"    \n"
+"    Resituisce uno stato di 0 o 1 a seconda della valutazione "
+"dell'espressione\n"
+"    condizionale ESPRESSIONE.  Le espressioni sono composte dalle stesse "
+"basilari usate\n"
+"    dal comando interno \"test\", e possono essere combinate usando i "
+"seguenti operatori:\n"
+"    \n"
+"      ( ESPRESSIONE )\tRestituisce il valore dell'ESPRESSIONE\n"
+"      ! ESPRESSIONE\t\tVero se l'ESPRESSIONE è falsa; falso in caso "
+"contrario\n"
+"      ESPR1 && ESPR2\tVero se sia ESPR1 che ESPR2 sono vere; falso in caso "
+"contrario\n"
+"      ESPR1 || ESPR2\tVero se una tra ESPR1 ed ESPR2 è vera; falso in caso "
+"contrario\n"
+"    \n"
+"    Quando vengono usati gli operatori \"==\" e \"!=\", la stringa a destra "
+"dell'operatore\n"
+"    è usata come un modello e ne viene effettuata la corrispondenza.\n"
+"    Quando viene usato l'operatore \"=~\", la stringa a destra "
+"dell'operatore è valutata\n"
+"    corrispondente a un'espressione regolare.\n"
+"    \n"
+"    Gli operatori && e || non valutano ESPR2 se ESPR1 è sufficiente a\n"
+"    determinare il valore dell'espressione.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    0 o 1 a seconda del valore dell'ESPRESSIONE."
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"Nomi e usi comuni delle variabili di shell.\n"
+"    \n"
+"    BASH_VERSION\tInformazioni sulla versione di Bash.\n"
+"    CDPATH\tUn elenco di directory da cercare separate da un due punti\n"
+"    \tfornite come argomenti per \"cd\".\n"
+"    GLOBIGNORE\tUn elenco di modelli separato da un due punti che descrivono "
+"i nomi\n"
+"    \t\tdi file che devono essere ignorati dall'espansione di percorso.\n"
+"    HISTFILE\tIl nome del file in cui è memorizzata la cronologia dei "
+"comandi.\n"
+"    HISTFILESIZE\tIl numero massimo di righe che può contenere questo file.\n"
+"    HISTSIZE\tIl numero massimo di righe di cronologia a cui può accedere\n"
+"    \t\tuna shell in esecuzione.\n"
+"    HOME\tIl nome completo del percorso della propria directory di login.\n"
+"    HOSTNAME\tIl nome dell'host corrente.\n"
+"    HOSTTYPE\tIl tipo di CPU sulla quale è in esecuzione questa versione di "
+"bash.\n"
+"    IGNOREEOF\tControlla il comportamento della shell quando riceve un "
+"carattere EOF\n"
+"    \t\tcome unico input.  Se impostato, il suo valore corrisponde al "
+"numero\n"
+"    \t\tdi caratteri EOF che si possono trovare in una fila in una riga "
+"vuota\n"
+"    \t\tprima che la shell esca (predefinito 10).  Quando viene azzerato, "
+"EOF\n"
+"    \t\tindica la fine dell'input.\n"
+"    MACHTYPE\tUna stringa che descrive l'attuale sistema dove è in "
+"esecuzione bash.\n"
+"    MAILCHECK\tQuanto spesso, in secondi, Bash controlla la presenza di "
+"nuova posta.\n"
+"    MAILPATH\tUn elenco di nomi di file separati da un due punti usati da "
+"Bash per\n"
+"    \t\tcontrollare la presenza di nuova posta.\n"
+"    OSTYPE\tLa versione di Unix sulla quale è in esecuzione questa versione "
+"di bash.\n"
+"    PATH\tUn elenco di directory, separato da un due punti, da analizzare "
+"quando\n"
+"    \t\tsi cercano i comandi.\n"
+"    PROMPT_COMMAND\tUn comando da eseguire prima della stampa di ciascun "
+"prompt\n"
+"    \t\tprimario.\n"
+"    PS1\t\tLa stringa del prompt primario.\n"
+"    PS2\t\tLa stringa del prompt secondario.\n"
+"    PWD\t\tIl nome completo del percorso della directory corrente.\n"
+"    SHELLOPTS\tUn elenco di opzioni di shell abilitate, separate da un due "
+"punti.\n"
+"    TERM\tIl nome del tipo di terminale corrente.\n"
+"    TIMEFORMAT\tIl formato di output per le statistiche temporali "
+"visualizzato dalla\n"
+"    \t\tparola riservata \"time\".\n"
+"    auto_resume\tNon null significa che una parola di un comando che compare "
+"da\n"
+"    \t\taol in una riga viene prima cercata nell'elenco dei job correnti\n"
+"    \t\tfermati.  Se trovato, questo job viene messo in primo piano.\n"
+"    \t\tUn valore pari a \"exact\" significa che la parola del comando deve\n"
+"    \t\tcorrispondere esattamente a un comando nell'elenco dei job fermati.  "
+"Un\n"
+"    \t\tvalore pari a \"substring\" significa che la parola del comando "
+"deve\n"
+"    \t\tcorrispondere a una sottostringa del job.  Qualsiasi altro valore "
+"significa\n"
+"    \t\tche il comando deve essere un prefisso di un lavoro fermato.\n"
+"    histchars\tCaratteri che controllano l'espansione della cronologia e la "
+"sostituzione\n"
+"    \t\trapida.  Il primo carattere è quello di sostituzione della "
+"cronologia,\n"
+"    \t\tsolitamente \"!\".  Il secondo è il carattere di \"sostituzione "
+"rapida\",\n"
+"    \t\tsolitamente \"^\".  Il terzo è il carattere di \"commento della "
+"cronologia\",\n"
+"    \t\tsolitamente \"#\".\n"
+"    HISTIGNORE\tUn elenco di modelli separato da un due punti usato per "
+"decidere quale\n"
+"    \t\tcomando dovrebbe essere salvato nell'elenco della cronologia.\n"
+
+#: builtins.c:1821
+#, fuzzy
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Aggiunge directory allo stack.\n"
+"    \n"
+"    Aggiunge una directory in cima allo stack delle directory o ruota lo\n"
+"    stack stesso, mettendo come primo elemento la directory di lavoro\n"
+"    corrente. Senza argomenti scambia le prime due directory in cima.\n"
+"    \n"
+"    Opzioni:\n"
+"      -n\tEvita il normale cambio di directory quando vengono aggiunte\n"
+"    \tdirectory allo stack, così da manipolare solo lo stack stesso.\n"
+"    \n"
+"    Argomenti:\n"
+"      +N\tRuota lo stack in modo che l'N-sima directory (contando\n"
+"    \ta partire da sinistra dell'elenco mostrato da \"dirs\", iniziando da\n"
+"    \tzero) sia in cima.\n"
+"    \n"
+"      -N\tRuota lo stack in modo che l'N-sima directory (contando\n"
+"    \ta partire da destra dell'elenco mostrato da \"dirs\", iniziando da\n"
+"    \tzero) sia in cima.\n"
+"    \n"
+"      dir\tAggiunge DIR in cima allo stack delle directory, facendone la\n"
+"    \tdirectory di lavoro corrente.\n"
+"    \n"
+"    Il comando interno \"dirs\" mostra lo stack delle directory.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che non sia fornito un argomento valido o "
+"non abbia\n"
+"    successo il cambio di directory."
+
+#: builtins.c:1855
+#, fuzzy
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Rimuove directory dallo stack.\n"
+"    \n"
+"    Rimuove voci dallo stack delle directory. Senza argomenti, rimuove\n"
+"     la directory in cima allo stack e cambia alla nuova prima directory.\n"
+"    \n"
+"    Opzioni:\n"
+"      -n\tEvita il normale cambio di directory quando vengono rimosse\n"
+"    \tdirectory dallo stack, così da manipolare solo lo stack stesso.\n"
+"    \n"
+"    Argomenti:\n"
+"      +N\tRimuove l'N-sima voce contando a partire da sinistra dell'elenco\n"
+"    \tmostrato da \"dirs\", iniziando da zero. Per esempio: \"popd +0\"\n"
+"    \trimuove la prima directory, \"popd +1\" la seconda.\n"
+"    \n"
+"      -N\tRimuove l'N-sima voce contando a partire da destra dell'elenco\n"
+"    \tmostrato da \"dirs\", iniziando da zero. Per esempio: \"popd -0\"\n"
+"    \trimuove l'ultima directory, \"popd -1\" la penultima.\n"
+"    \n"
+"    Il comando interno \"dirs\" mostra lo stack delle directory.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che non venga fornito un argomento non "
+"valido o non\n"
+"    abbia successo il cambio di directory."
+
+#: builtins.c:1885
+#, fuzzy
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Visualizza lo stack delle directory.\n"
+"    \n"
+"    Visualizza l'elenco delle directory ricordate attualmente. Le directory\n"
+"    vengono inserite nell'elenco con il comando \"pushd\"; è possibile\n"
+"    andare a ritroso nell'elenco con il comando \"popd\".\n"
+"    \n"
+"    Opzioni:\n"
+"      -c\tPulisce lo stack delle directory eliminandone tutti gli elementi\n"
+"      -l\tNon stampa le directory con prefisso tilde relative alla propria\n"
+"    \tdirectory home\n"
+"      -p\tStampa lo stack delle directory una voce per riga\n"
+"      -v\tStampa lo stack delle directory una voce per riga usando come\n"
+"    \tprefisso la posizione nello stack\n"
+"    \n"
+"    Argomenti:\n"
+"      +N\tMostra l'N-sima voce contando a partire da sinistra dell'elenco\n"
+"    \tmostrato da dirs quando invocato senza opzioni, iniziando da zero.\n"
+"    \n"
+"      -N\tMostra l'N-sima voce contando a partire da destro dell'elenco\n"
+"    \tmostrato da dirs quando invocato senza opzioni, iniziando da zero.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che non sia fornita un'opzione non valida o "
+"si riscontri un errore."
+
+#: builtins.c:1916
+#, fuzzy
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"Imposta le opzioni della shell.\n"
+"    \n"
+"    Cambia le impostazioni di ciascuna opzione di shell NOMEOPZ.  Senza "
+"argomenti\n"
+"    per le opzioni, elenca tutte le opzioni di shell indicando se sono o non "
+"sono\n"
+"    impostate.\n"
+"    \n"
+"    Opzioni:\n"
+"      -o\tLimita i NOMEOPZ a quelli definiti per essere usati con \"set -o"
+"\"\n"
+"      -p\tStampa ogni opzione di shell indicando il relativo stato\n"
+"      -q\tNon stampa l'output\n"
+"      -s\tAbilita (imposta) ciascun NOMEOPZ\n"
+"      -u\tDisabilita (elimina) ciascun NOMEOPZ\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo se NOMEOPZ è abilitato; insuccesso se viene "
+"fornita\n"
+"    una opzione non valida o NOMEOPZ è disabilitato."
+
+#: builtins.c:1937
+#, fuzzy
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"Formatta e stampa gli ARGOMENTI come indicato dal FORMATO.\n"
+"    \n"
+"    Opzioni:\n"
+"      -v var\tAssegna l'output alla variabile di shell VAR invece\n"
+"    \t\tdi visualizzarlo sullo standard output\n"
+"    \n"
+"    FORMATO è una stringa di caratteri che contiene tre tipi di oggetto: "
+"caratteri\n"
+"    semplici, che sono semplicemente copiati sullo standard output; sequenze "
+"di escape\n"
+"    dei caratteri, che sono convertite e copiate sullo standard output;\n"
+"    specifiche di formato, ognuna delle quali provoca la stampa del "
+"successivo argomento\n"
+"    consecutivo.\n"
+"    \n"
+"    In aggiunta alle specifiche di formato standard descritte in printf(1)\n"
+"    e printf(3), printf interpreta:\n"
+"    \n"
+"      %b\tEspande le sequenze di escape di backslash nell'argomento "
+"corrispondente\n"
+"      %q\tQuota l'argomento in modo che possa essere riusato come input per "
+"la shell\n"
+"      %(fmt)T Visualizza la stringa della data/ora risultante dall'uso di "
+"FMT come stringa\n"
+"            di formato per strftime(3)\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che non venga fornita una opzione non valida "
+"o si riscontri\n"
+"    un errore di scrittura o assegnazione."
+
+#: builtins.c:1971
+#, fuzzy
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Specifica come gli argomenti debbano essere completati da Readline.\n"
+"    \n"
+"    Per ciascun NOME, specifica come gli argomenti debbano essere "
+"completati.  Se non\n"
+"    vengono fornite opzioni, le specifiche di completamento esistenti sono "
+"stampate in modo\n"
+"    che possano essere riusate come input.\n"
+"    \n"
+"    Opzioni:\n"
+"      -p\tStampa le specifiche di completamento esistenti in un formato "
+"riusabile\n"
+"      -r\tRimuove una specifica di completamento per ciascun NOME, oppure "
+"tutte\n"
+"    \tse non viene fornito alcun NOME\n"
+"      -D\tApplica i completamenti e le azioni come predefiniti per i "
+"comandi\n"
+"    \tsenza alcun completamento definito specifico\n"
+"      -E\tApplica i completamenti e le azioni ai comandi \"vuoti\" --\n"
+"    \tcompletamenti tentati su una riga vuota\n"
+"    \n"
+"    Quando viene tentato un completamento, le azioni sono applicate "
+"nell'ordine\n"
+"    in cui sono sopra elencate le opzioni a lettera maiuscola.\n"
+"    L'opzione -D ha precedenza su -E.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che non sia fornita una opzione non valida o "
+"si riscontri un errore."
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Visualizza i possibili completamenti a seconda delle opzioni.\n"
+"    \n"
+"    È pensata per essere usata all'interno di una funzione di shell per "
+"generare\n"
+"    dei possibili completamenti.  Se viene fornito l'argomento opzionale "
+"PAROLA,\n"
+"    vengono generate le corrispondenze relative a PAROLA.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che non sia fornita una opzione non valida o "
+"si riscontri un errore."
+
+#: builtins.c:2016
+#, fuzzy
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"Modifica o visualizza le opzioni di completamento.\n"
+"    \n"
+"    Modifica le opzioni di completamento per ciascun NOME, oppure, se non "
+"viene fornito alcun NOME,\n"
+"    il completamento attualmente in esecuzione.  Con nessuna OPZIONE "
+"fornita, stampa\n"
+"    le opzioni di completamento per ciascun NOME o le specifiche di "
+"completamento correnti.\n"
+"    \n"
+"    Opzioni:\n"
+"    \t-o opzione\tImposta l'OPZIONE di completamento per ciascun NOME\n"
+"    \t-D\t\tCambia le opzioni per il completamento di comando \"predefinito"
+"\"\n"
+"    \t-E\t\tCambia le opzioni per il completamento di comando \"vuoto\"\n"
+"    \n"
+"    Usando \"+o\" al posto di \"-o\" disabilita l'opzione specificata.\n"
+"    \n"
+"    Argomenti:\n"
+"    \n"
+"    Ciascun NOME si riferisce a un comando per il quale deve essere stata "
+"precedentemente\n"
+"    definita una specifica di completamento con il comando interno \"complete"
+"\".  Se non viene fornito\n"
+"    alcun NOME, compopt deve essere richiamato da una funzione che generi "
+"attualmente\n"
+"    completamenti, e le opzioni per questo generatore di completamenti "
+"attualmente\n"
+"    in esecuzione sono modificate\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che non venga fornita una opzione non valida "
+"o NOME non\n"
+"    abbia una specifica di completamento definita."
+
+#: builtins.c:2047
+#, fuzzy
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"Legge righe dallo standard input in una variabile di array indicizzato.\n"
+"    \n"
+"    Legge righe dallo standard input nella variabile di ARRAY indicizzato, "
+"oppure\n"
+"    dal descrittore di file FD se viene fornita l'opzione -u.  La variabile "
+"MAPFILE\n"
+"    è l'ARRAY predefinito.\n"
+"    \n"
+"    Opzioni:\n"
+"      -n numero\t\tCopia al massimo un NUMERO di righe.  Se NUMERO è 0, "
+"vengono copiate tutte.\n"
+"      -O origine\tInizia assegnando all'ARRAY all'indice ORIGINE.  L'indice "
+"predefinito è 0.\n"
+"      -s numero \tScarta le prime NUMERO righe lette.\n"
+"      -t\t\tRimuove un ritorno a capo finale da ciascuna riga letta.\n"
+"      -u fd\t\tLegge le righe da un descrittore di file FD invece che dallo "
+"standard input.\n"
+"      -C callback\tEsamina CALLBACK ogni volta che vengono lette un numero "
+"QUANTO di righe.\n"
+"      -c quantità\tSpecifica il numero di righe lette tra ciascuna chiamata "
+"a CALLBACK.\n"
+"    \n"
+"    Argomenti:\n"
+"      ARRAY\t\tNome della variabile di array da usare per i dati dei file.\n"
+"    \n"
+"    Se viene fornito -C senza -c, il quanto predefinito è 5000.  Quando\n"
+"    viene analizzata CALLBACK, viene fornito l'indice dell'elemento di\n"
+"    array successivo da assegnare e la riga da attribuire a quell'elemento\n"
+"    come argomenti aggiuntivi.\n"
+"    \n"
+"    Se non viene fornito con una origine esplicita, il file di mappa "
+"azzererà l'ARRAY\n"
+"    prima della relativa assegnazione.\n"
+"    \n"
+"    Stato di uscita:\n"
+"    Restituisce successo a meno che non venga fornita una opzione non "
+"valida, ARRAY sia\n"
+"    in sola lettura oppure non indicizzato."
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Legge le righe da un file in una variabile di array.\n"
+"    \n"
+"    Sinonimo per \"mapfile\"."
+
+#, fuzzy
+#~ msgid "Copyright (C) 2019 Free Software Foundation, Inc."
+#~ msgstr "Copyright © 2011 Free Software Foundation, Inc."
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "Restituisce il contesto della chiamata alla subroutine corrente.\n"
+#~ "    \n"
+#~ "    Senza ESPR, restituisce "
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process: processo %5ld (%s) in the_pipeline"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "Numero di segnale sconosciuto"
+
+#~ msgid ""
+#~ "License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl."
+#~ "html>\n"
+#~ msgstr ""
+#~ "Licenza GPLv2+: GNU GPL versione 2 o successive <http://gnu.org/licenses/"
+#~ "gpl.html>\n"
+
+#~ msgid ":"
+#~ msgstr ":"
+
+#~ msgid "true"
+#~ msgstr "vero"
+
+#~ msgid "false"
+#~ msgstr "falso"
+
+#~ msgid "times"
+#~ msgstr "times"
diff --git a/po/ja.gmo b/po/ja.gmo
new file mode 100644
index 0000000..b1c1af9
--- /dev/null
+++ b/po/ja.gmo
diff --git a/po/ja.po b/po/ja.po
new file mode 100644
index 0000000..d8802a2
--- /dev/null
+++ b/po/ja.po
@@ -0,0 +1,5897 @@
+# Japanese messages for GNU bash
+# Copyright (C) 1999, 2010, 2011, 2013 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+# Kyoichi Ozaki <k@afromania.org>, 2000.
+# Takeshi Hamasaki <hmatrjp@users.sourceforge.jp>, 2011, 2013.
+# Yasuaki Taniguchi <yasuakit@gmail.com>, 2011, 2014, 2017.
+msgid ""
+msgstr ""
+"Project-Id-Version: GNU bash 4.4\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2017-07-02 01:46+0100\n"
+"Last-Translator: Yasuaki Taniguchi <yasuakit@gmail.com>\n"
+"Language-Team: Japanese <translation-team-ja@lists.sourceforge.net>\n"
+"Language: ja\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"X-Generator: Poedit 2.0.2\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "誤���列�添字"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr ""
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: インデックス�列�ら連想�列�変��る�������ん"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: 無効�連想�列�キー��"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: �列�添字��数字を設定����ん"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr "%s: %s: 連想�列を設定�る����添字を����れ�����ん"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: %s を作�����ん"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr "bash_execute_unix_command: コマンド�キーマップ��り��ん"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: 最���空白類文字� `\"' ���り��ん"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "閉�る `%c' � %s ��り��ん"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: 区切り文字コロン(:)��り��ん"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "`%s': 割り当�解除����ん"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr "中括弧展開: %s �メモリを割り当�られ��ん"
+
+#: braces.c:406
+#, fuzzy, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr ""
+"中括弧展開: failed to allocate memory for %d �素�メモリ�割り当��失敗��"
+"��"
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr "中括弧展開: `%s' ��メモリ割り当��失敗����"
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "`%s': 無効�エイリアス���"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "行編集�有効�������ん"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "`%s': 無効�キーマップ���"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: %s を読�込���ん"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "`%s': �明�関数���"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s ���キー�も割り当�られ����ん。\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s �次を通��起動��� "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "`%s': 割り当�解除����ん"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "ループ回数"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "`for'�`while' ��� `until' ループ����味��り��"
+
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"�在�サブルー�ン呼�出��コンテキストを返���。\n"
+"    \n"
+"    EXPR �無�場� \"$line $filename\" を返���。  EXPR ��る場��\n"
+"    \"$line $subroutine $filename\" を返���。��追加�情報�スタックト"
+"レース\n"
+"    を�供�る時�利用���。\n"
+"    \n"
+"    EXPR �値��在�フレーム�戻る���何回フレーム�呼�出�れ��る�を\n"
+"    �味���。最上��フレーム� 0 ��。\n"
+"    \n"
+"    終了ステータス:\n"
+"    シェル�関数を実行������ EXPR �無効�場�を除� 0 を返���。"
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "HOME �設定�れ����ん"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "引数�多����"
+
+#: builtins/cd.def:342
+#, fuzzy
+msgid "null directory"
+msgstr "他�ディレクトリ��り��ん"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "OLDPWD �設定�れ����ん"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "%d 行: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "警告: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: 使用法: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: オプション��引数�必���"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: 数字�引数�必���"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: 見��り��ん"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: 無効�オプション��"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: 無効�オプション���"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "`%s': 有効�識別����り��ん"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "無効�八進数��"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "無効��六進数��"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "無効�数字��"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: 無効�シグナル指定��"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "`%s': pid ���有効�ジョブ指定���り��ん"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: 読��り専用�変数��"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s �範囲外��"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "引数"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s �範囲外��"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: ��よ��ジョブ��り��ん"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: ジョブ制御�無効�������"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "ジョブ制御�無効�������"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: 制��れ����"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "制��れ����"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: シェル�ビルトイン関数���り��ん"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "書�込�エラー: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "ターミナル属性�設定時�エラー�発生���� : %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "ターミナル属性��得時�エラー�発生���� : %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: カレントディレクトリ��得時�エラー�発生���� : %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: 曖昧�ジョブ指定��"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr "���ージョン��ヘルプ�利用����ん"
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: 消去����ん: %s �読��り専用��"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: 消去����ん"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: 無効�アクション���"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: 補完指定��り��ん"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "警告: -F オプション�期待通り�動作����も�れ��ん"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "警告: -C オプション�期待通り�動作����も�れ��ん"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "補完機能��在実行�れ����ん"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "関数�中���使用����"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr "%s: �照変数��列���������ん"
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr "%s: 自身を�照�る���照変数�許��れ����ん"
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s: 循環���照��"
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "`%s': ���照���無効�変数��"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "関数作�時� `-f' を使用����ん"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: 読��り専用関数��"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr ""
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: ��方法��列変数を消去�る�������ん"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: 連想�列�らインデックス�列�変��る�������ん"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "動的ロード�利用����ん"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "共有オブジェクト %s を開��������ん : %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "%s �共有オブジェクト %s �存在���ん: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: 動的�ロード�れ����ん"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr "関数 %s �ロード�失敗を返����(%d): ロード�れ��ん���"
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: 動的�ロード�れ����ん"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: 削除����ん: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: ディレクトリ��"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: 通常ファイル���り��ん"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: ファイル�大�����"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: �イナリファイルを実行����ん"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: 実行����ん: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "ログアウト\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "ログインシェル���り��ん: `exit' を使用������"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "�止���るジョブ��り��。\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "動作中�ジョブ��り��。\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "コマンド�見��り��ん"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "ヒストリ指定"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: 一時ファイルを開��������ん: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "カレント"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "ジョブ %d �ジョブ制御���開始�れ���"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: �正�オプション�� -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: オプション��引数�必��� -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "�ッシュ�無効�������"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: �ッシュテーブル�空��\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "hits\tcommand\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "キーワード�一致��シェルコマンド `"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"`%s' �一致�るヘルプ項目��り��ん。`help help'�`man -k %s' ��� `info "
+"%s' を試������"
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: 開��������ん: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"�れら�シェルコマンド�内部�定義�れ����。`help' �入力��一覧を�照�"
+"�����。\n"
+"`help ��' �入力�る� `��' ���関数�より詳��説明�得られ��。\n"
+"'info bash' を使用�る�シェル全般�より詳��説明�得られ��。\n"
+"`man -k' ��� info を使用�る�一覧���コマンド�より詳��説明�得られ�"
+"�。\n"
+"\n"
+"���後�アスタリスク (*) ��る場����コマンド�無効�����る��を�"
+"味���。\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "-anrw を2�以上一緒�使用�る�������ん"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "ヒストリ�置"
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: 無効�タイムスタンプ��"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: ヒストリ�展開�失敗����"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: inlib �失敗����"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "`-x' �他�オプションを�時�使用����ん"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: 引数�プロセスID�ジョブID���れ�����ん"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "�明�エラー��"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "��予期�れ��"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: インデックス�列���り��ん"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: 無効�ファイル記述�指定��"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: 無効�ファイル記述�: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: 無効�行数��"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: 無効��列�原点��"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: コール�ック� quantum �無効��"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "空��列変数���"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "�列変数�サ�ート�必���"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "`%s': 書�指定文字��り��ん"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "`%c': 無効�時間書�指定��"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "`%c': 無効�書�指定文字��"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "警告: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "書�解��題��: %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "\\x 用��六進数字��り��ん"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "\\%c 用�ユニコード数値��り��ん"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "他�ディレクトリ��り��ん"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s: 無効�引数��"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<カレントディレクトリ��り��ん>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "ディレクトリスタック�空��"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "ディレクトリスタック�インデックス"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"�在記憶�れ��るディレクトリスタックを表示���。ディレクトリ� `pushd'\n"
+"    コマンド�よ��スタック�一番上��存�れ��。`popd'コマンド�よ��\n"
+"    スタック�ら�り戻��������。\n"
+"    \n"
+"    オプション:\n"
+"      -c\tディレクトリスタック�ら�����素を�り除�空��る\n"
+"      -l\tホームディレクトリ�ら�相対パスを ~ を利用��形��\n"
+"    \t表示���\n"
+"      -p\tディレクトリスタック��素を1行毎�表示�る\n"
+"      -v\tディレクトリスタック��素を1行���番�を���\n"
+"    \t表示�る\n"
+"    \n"
+"    引数:\n"
+"      +N\tオプション���起動�れ�場��リスト�先頭�ら数��\n"
+"    \tN番目��素を表示���。開始番��0��。\n"
+"    \n"
+"      -N\tオプション���起動�れ�場��リスト�末尾�ら数��\n"
+"\tN番目��素を表示���。開始番��0��。"
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"ディレクトリスタック�先頭�ディレクトリを追加���。���ディレクトリ\n"
+"    スタックを回転���。新��スタック�先頭�カレントディレクトリ��\n"
+"    り��。引数���起動�れ�場��先頭�2��ディレクトリを交����。\n"
+"    \n"
+"    オプション:\n"
+"      -n\tスタック�ディレクトリを追加��時�通常�ディレクトリ変更\n"
+"    \tを抑止���。よ���スタック���作�れ��。\n"
+"    \n"
+"    引数:\n"
+"      +N\t先頭�N番目�ディレクトリ��るよ��回転���(`dirs'�\n"
+"    \t表示�れるスタック�先頭�ら数��数��。開始番��0��)。\n"
+"    \n"
+"      -N\t先頭�N番目�ディレクトリ��るよ��回転���(`dirs'�\n"
+"    \t表示�れるスタック�末尾�ら数��数��。開始番��0��)。\n"
+"    \n"
+"      ディレクトリ\tディレクトリをスタック�先頭�加����ディレク\n"
+"    \tトリを新��カレントディレクトリ����。\n"
+"    \n"
+"    `dirs' ビルトインコマンド�ディレクトリスタックを表示���。"
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"ディレクトリスタック�ら�素を削除���。引数�無�場�スタック�先頭�ら\n"
+"    削除��新��スタック�先頭ディレクトリ�移動���。\n"
+"    \n"
+"    オプション:\n"
+"      -n\tスタック�らディレクトリを削除��時�通常�ディレクトリ変更\n"
+"    \tを抑止���。よ���スタック���作�れ��。\n"
+"    \n"
+"    引数:\n"
+"      +N\tディレクトリスタック(`dirs' �表示�れる)�先頭�ら数��\n"
+"    \t N 番目��素を削除���。開始番�� 0 ��。例: `popd +0'\n"
+"    \t�最��ディレクトリを削除���。`popd +1' �2番目��。\n"
+"    \n"
+"      -N\tディレクトリスタック(`dirs' �表示�れる)�最後�ら数��\n"
+"    \t N 番目��素を削除���。開始番�� 0 ��。例: `popd +0'\n"
+"    \t�最後�ディレクトリを削除���。`popd +1' �最後�ら2番目��。\n"
+"    \n"
+"    `dirs' ビルトインコマンド�ディレクトリスタックを表示���。"
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: 無効�タイムアウト指定��"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "読�込�エラー: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr "`return' �関数��� source �れ�スクリプト内���利用����"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "変数�関数を�時�消去�る�������ん"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: �列変数���り��ん"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: 関数���り��ん"
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr "%s: export ����ん"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "シフト回数"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "シェルオプションを�時�有効��無効�����ん"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: 無効�シェルオプション���"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "ファイル��引数���必���"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: ファイル�見��り��ん"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "中断����ん"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "ログインシェルを中断����ん"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s � `%s' �エイリアス��\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s �シェル�予約語��\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s �関数��\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s �特殊シェル組�込�関数��\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s �シェル組�込�関数��\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s � %s ��\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s ��ッシュ�れ���� (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: limit �無効�引数��"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "`%c': 誤��コマンド��"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: limit を�得����ん: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "limit"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: limit を変更����ん : %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "八進数"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "`%c': 無効�シンボリックモード演算���"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "`%c': 無効�シンボリックモード文字��"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " 行 "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "最後�コマンド: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "中止�����..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr "情報: "
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "�明�コマンドエラー��"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "誤��コマンドタイプ��"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "誤��接続��"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "誤��ジャンプ��"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: 未割り当��変数��"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\a入力待��タイムアウト����: 自動ログアウト\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "/dev/null �ら標準入力�対��リダイレクト����ん: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "TIMEFORMAT: `%c': 無効�書�文字��"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr ""
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "パイプエラー"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr "eval: eval �入れ�レベル�最大値を超����� (%d)"
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr "%s: source �入れ�レベル�最大値を超����� (%d)"
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr "%s: 関数�入れ�レベル�最大値を超����� (%d)"
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: 制��れ����:  `/' をコマンド��中�指定����ん"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: コマンド�見��り��ん"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: 誤��インタプリタ��"
+
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: �イナリファイルを実行����ん: %s"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "`%s': 特殊シェル組�込�関数��"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "fd %d を fd %d �複製����ん"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "���帰�能レベルを越����"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "�帰スタック�アンダーフロー����"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "��構文エラー��り��"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "�変数�割り当�を行�������"
+
+#: expr.c:530
+#, fuzzy
+msgid "syntax error in variable assignment"
+msgstr "��構文エラー��り��"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "0 �よる除算��"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "�グ: 誤����トークン��"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "�件��� `:' �予期�れ��"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "0より���指数部��"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "識別���置インクリメント����置デクリメント�予期�れ��"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "`)' ��り��ん"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "構文エラー: オペランド�予期�れ��"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "構文エラー: 無効�計算演算���"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (エラー��るトークン� \"%s\")"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "無効�基底�数値��"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: 無効�行数��"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "基底�値�大�����"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: ��エラー\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: 親ディレクトリ�アクセス����ん"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "ファイル記述�(fd) %d を無�延モード��設定����ん"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr "新�ファイル記述�(fd) %d を bash �入力���割り当�られ��ん"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input: 新� fd %d ��ッファ����存在���"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: pgrp pipe"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "実行中�ジョブ %2$d � fork �� pid %1$d �出�����"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "プロセスグループ %2$ld �ジョブ %1$d を削除�����"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process: pid %5ld (%s) ���存在���る�マーク�れ����"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: ��よ�� pid �存在���ん"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "シグナル %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "終了"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "�止"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "�止 (%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "実行中"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "終了(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "終了 %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "�明�ステータス"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(コアダンプ) "
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (wd: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "�プロセス setpgid (%ld �ら %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: pid %ld ���シェル��プロセス���り��ん"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: プロセス %ld �記録��り��ん"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: ジョブ %d ��止�����"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: ��よ��ジョブ��り��ん"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: ジョブ�終了����"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: ジョブ %d �����ックグラウンド�動作�����"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr "waitchld: �定�ブロックを��る��� WNOHANG をオン�����。"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: %d 行: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (コアダンプ)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(wd now: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: getpgrp �失敗����"
+
+#: jobs.c:4447
+#, fuzzy
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: line discipline"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: line discipline"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "端末プロセスグループを設定����ん (%d)"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "��シェル��ジョブ制御�無効�������"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: 失敗��アサーション: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d: アサーション失敗\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "�明"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: free ブロックリスト�壊れ����"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: 既� free �れ�ブロックを引数���呼�出�れ���"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: 未割当�ブロックを引数���呼�出�れ���"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: アンダーフローを検出����。 mh_nbytes �範囲外��"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: アンダーフローを検出����。 mh_nbytes �範囲外��"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: 開始�終了�塊�大���異������"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: 未割当�ブロックを引数���呼�出�れ���"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc: アンダーフローを検出����。 mh_nbytes �範囲外��"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc: アンダーフローを検出����。 mh_nbytes �範囲外��"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: 開始�終了�塊�大���異������"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: FIND_ALLOC �割り当�テーブル�������\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: %p 既�テーブル上��割り当�られ����\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: %p テーブル上��既�解放�れ����\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "無効�基底"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: �明�ホスト��"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: 無効�サービス��"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: �ットワークパス指定�誤り��り��"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "�ットワーク�作�サ�ート�れ����ん"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: ロケールを変更����ん (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: ロケールを変更����ん (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: ロケールを変更����ん (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: ロケールを変更����ん (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "メール� $_ ��り��"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "新��メール� $_ ��り��"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "%s �メール�既読��\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "構文エラー: 数値���必���"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "構文エラー: 予期��� `;' ��"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "構文エラー: `((%s))'"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: 誤��指定�種類 %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr ""
+"ヒアドキュメント� %d 行目�ファイル終了 (EOF) ������ (`%s' �必�)"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr "make_redirection: リダイレクト指定 `%d' �範囲外��"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr ""
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "対応�る `%c' を探索中�予期���ファイル終了 (EOF) ��"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "`]]' を探索中�予期���ファイル終了 (EOF) ��"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "�件��構文エラー: 予期���トークン `%s' ��"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "�件��構文エラー��り��"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "予期���トークン `%s' ��。`)' �予期�れ��"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "`)' �予期�れ��"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "�件�項演算��予期���引数 `%s' ��"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "�件�項演算��予期���引数��"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "`%s` �予期���トークン��。�件二項演算��予期�れ��"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "�件二項演算��予期�れ��"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "�件二項演算��予期���引数 `%s' ��"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "�件二項演算��予期���引数��"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "�件コマンド�予期���トークン `%c' ��り��"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "�件コマンド�予期���トークン `%s' ��り��"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "�件コマンド�予期���トークン %d ��り��"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "予期���トークン `%s' 周辺�構文エラー��り��"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "`%s' 周辺�構文エラー��り��"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "構文エラー: 予期���ファイル終了 (EOF) ��"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "構文エラー"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "シェル�ら脱出�る�� \"%s\" を使用������。\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "対応�る `)' を探索中�予期���ファイル終了(EOF)��"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "completion: 関数 `%s' �見��り��ん"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr ""
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: NULL COMPSPEC"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: 誤��接続 `%d'"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: 無効�ファイル記述���"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: NULL ファイル�インタ��"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != fileno xtrace fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: `%c': 無効�書�文字��"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "ファイル記述��範囲外��"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: 曖昧�リダイレクト��"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: 存在�るファイルを上書�����ん"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: 制��れ����: 出力をリダイレクト出���ん"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "ヒアドキュメント用一時ファイルを作�����ん: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: ファイル記述� (fd) を変数�設定�る�������ん"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "�ットワーク�無効�場� /dev/(tcp|udp)/host/port �サ�ート�れ��ん"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "リダイレクトエラー: ファイル記述�を複製����ん"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "/tmp �見��り��ん。作�������!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp �有効�ディレクトリ����れ�����ん"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr ""
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: 無効�オプション"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "uidを %d �設定����ん: 実効uid %d"
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "gidを %d �設定����ん: 実効gid %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr "デ�ッガを開始����ん。デ�ッガモード�無効�������"
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr "%s: ディレクトリ��"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "������り��ん!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, �ージョン %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"使用法:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "GNU 形��長�オプション:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "シェルオプション:\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-ilrsD, -c command ��� -O shopt_option\t\t(起動時��)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s ��� -o option\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+"シェルオプション�詳細����� `%s -c \"help set\"'�入力������。\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr "シェル組�込�コマンド����� `%s -c help' �入力������。\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "�グ報告を�る場�� `bashbug' コマンドを使用������。\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr "bashホームページ: <http://www.gnu.org/software/bash>\n"
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr ""
+"GNUソフトウェアを使用�る時�一般的�ヘルプ : <http://www.gnu.org/gethelp/>\n"
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: 無効��作��"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "悪�シグナル"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "�止"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "割り込�"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "終了"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "�正�指定"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "BPT trace/trap"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "ABORT 指定"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "EMT 指定"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "浮動�数点例外"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Killed"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "�スエラー"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "セグメンテーションフォルト"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "誤��システムコール"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "パイプ�切れ���"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "アラーム時計"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Terminated"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "急�� IO 状態"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "�止 (シグナル)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "続行"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "�プロセス�死亡����止 "
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "�止 (tty 入力)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "�止 (tty 出力)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "I/O 用��������"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "CPU limit"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "ファイル limit"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "警報 (仮想)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "警報 (プロファイル)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "ウィンドウ�変更�れ���"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "記録�ロック"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "ユーザシグナル 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "ユーザシグナル 2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "HFT 未決�入力データ"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "電�故障��険"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "システムクラッシュ��険"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "プロセスを別�CPU�移動"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "プログラミングエラー"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "HFT monitorモード�与�られ���"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "HFT monitorモード�奪�れ���"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "HFT サウンドシーケンス�完了����"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "情報�求"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "�明�シグナル番� %d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "誤��代入: 閉�る `%s' � %s �存在���ん"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: リストを�列�素�割り当�����ん"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "プロセス代入��パイプを作�����ん"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "プロセス代入���プロセスを作�����ん"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "��付�パイプ %s を読�込�用�開���ん"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "��付�パイプ %s を書�込�用�開���ん"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "��付�パイプ %s をファイル記述�(fd) %d ���複製����ん"
+
+#: subst.c:6213
+#, fuzzy
+msgid "command substitution: ignored null byte in input"
+msgstr "誤��代入: %s �閉�る \"`\" ��り��ん"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "コマンド代入��パイプを作�����ん"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "コマンド代入���プロセスを作�����ん"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute: パイプを fd 1 ���複製����ん"
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: ���照���無効�変数��"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, fuzzy, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: 無効�行数��"
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr "%s: 無効�変数���"
+
+#: subst.c:7256
+#, fuzzy, c-format
+msgid "%s: parameter not set"
+msgstr "%s: パラメータ� null ���設定�れ����ん"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: パラメータ� null ���設定�れ����ん"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: substring expression < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: 誤��代入��"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: ��方法�割当�����ん"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr "将���ージョン�シェル��強制的�数値代入���評価�れ��"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "誤��代入: %s �閉�る \"`\" ��り��ん"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "一致���ん: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "引数�予期�れ��"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: 整数���予期�れ��"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "`)' �予期�れ��"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "`)' �予期�れ����見������ %s ��"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: 二項演算��予期�れ��"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: �項演算��予期�れ��"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "`]'��り��ん"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "構文エラー: 予期��� `;' ��"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "無効�シグナル番�"
+
+#: trap.c:325
+#, fuzzy, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr "eval: eval �入れ�レベル�最大値を超����� (%d)"
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: trap_list[%d] �誤��値��り��: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps: シグナル�ンドラー� SIG_DFL��。, %d (%s) を自身����"
+"��。"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: 誤��シグナル %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "`%s' �関数定義をイン�ート中�エラー�発生����"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "シェルレベル (%d) �高����。1��設定�れ���"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: �在�スコープ�関数コンテキスト���り��ん"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: 変数��期化�れ�����も�れ��ん"
+
+#: variables.c:3475
+#, fuzzy, c-format
+msgid "%s: assigning integer to name reference"
+msgstr "%s: ���照���無効�変数��"
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: �在�スコープ�関数コンテキスト���り��ん"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s � null � exportstr を������"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "%2$s �対�る exportstr � %1$d �無効�文字��"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "%s �対�る exportstr � `=' ��り��ん"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr ""
+"pop_var_context: shell_variables �先頭��。関数コンテキスト���り��ん"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: global_variables コンテキスト���り��ん"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr "pop_scope: shell_variables �先頭��。一時環境スコープ���り��ん"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: ファイル���開��������ん"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: トレースファイル記述����無効�値��"
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s: 値�互�性�範囲外��"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Copyright (C) 2012 Free Software Foundation, Inc."
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"ライセンス GPLv3+: GNU GPL �ージョン 3 ����れ以� <http://gnu.org/"
+"licenses/gpl.html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, �ージョン %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr "This is free software; you are free to change and redistribute it."
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "There is NO WARRANTY, to the extent permitted by law."
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %lu �イトを割当����ん (%lu �イトを割当済�)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: %lu �イトを割当����ん"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: %lu �イトを割当����ん (%lu �イトを割当済�)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: %lu �イトを割当����ん"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [name[=value] ... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] name [name ...]"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function ��� readline-command]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [shell-builtin [arg ...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [expr]"
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]] [-@]] [dir]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] command [arg ...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilnrtux] [-p] [name[=value] ...]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilnrtux] [-p] name[=value] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [option] name[=value] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [arg ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [arg ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f filename] [name ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [arg ...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts optstring name [arg]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a name] [command [arguments ...]] [redirection ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr "fc [-e ename] [-lnr] [first] [last] ��� fc -s [pat=rep] [command]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [job_spec]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [job_spec ...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p pathname] [-dt] [name ...]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [pattern ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d offset] [n] ��� history -anrw [filename] ��� history -"
+"ps arg [arg...]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [jobspec ...] ��� jobs -x command [args]"
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [jobspec ... | pid ...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... ��� kill -l "
+"[sigspec]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let 引数 [引数 ...]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [name ...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [name[=value] ...] ��� export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [name[=value] ...] ��� readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source filename [arguments]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". filename [arguments]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [expr]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ arg... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[arg] signal_spec ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] name [name ...]"
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [mode]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-n] [id ...]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [pid ...]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for NAME [in WORDS ... ] ; do COMMANDS; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select NAME [in WORDS ... ;] do COMMANDS; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] pipeline"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while COMMANDS; do COMMANDS; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until COMMANDS; do COMMANDS; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [NAME] command [redirections]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function name { COMMANDS ; } ��� name () { COMMANDS ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ COMMANDS ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "job_spec [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( expression ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ expression ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "変数 - 変数�������味"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | dir]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [optname ...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v var] format [arguments]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DE] [-o option] [-A action] [-G globpat] [-"
+"W wordlist]  [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist]  "
+"[-F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+
+#: builtins.c:239
+#, fuzzy
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o option] [-DE] [name ...]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+
+#: builtins.c:244
+#, fuzzy
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-n count] [-O origin] [-s count] [-t] [-u fd] [-C callback] [-c "
+"quantum] [array]"
+
+#: builtins.c:256
+#, fuzzy
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"エイリアスを定義���表示���。\n"
+"    \n"
+"    引数���場��`alias` ��使用�能�エイリアス一覧を `alias ��=値'\n"
+"    形��標準出力�表示���。\n"
+"    \n"
+"    �����れ��与�られ����値�エイリアスを定義���。値�後続�空"
+"白\n"
+"    �存在�る場��次�語�エイリアス展開時�エイリアス代入対象���確��"
+"れ\n"
+"    ��。\n"
+"\n"
+"    オプション:\n"
+"      -p\t����定義�れ�エイリアスを�利用�能�形��表示���\n"
+"    \n"
+"    終了ステータス:\n"
+"    alias �与�られ����エイリアス�定義�れ����場�を除� true を返"
+"���。"
+
+#: builtins.c:278
+#, fuzzy
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"定義�れ�エイリアス一覧�ら����エイリアスを削除���。\n"
+"    \n"
+"    Options:\n"
+"      -a\t����エイリアス定義を削除���。\n"
+"    \n"
+"    ���エイリアス�存在���場�を除� true を返���。"
+
+#: builtins.c:291
+#, fuzzy
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"Readline �キー割り当��変数を設定���。\n"
+"    \n"
+"    キーシーケンスを Readline 関数���マクロ�割り当�を行���Readline\n"
+"    変数を設定���。オプション�無�引数�構文� ~/.inputrc �構文�\n"
+"    ����。�����一�引数���与���れ��り��ん。\n"
+"    例: bind '\"\\C-x\\C-r\": re-read-init-file'\n"
+"\n"
+"    Options:\n"
+"    オプション:\n"
+"      -m  keymap         ��コマンド�間�キーマップ��� KEYMAP を使用�"
+"る。\n"
+"                         利用�能�キーマップ�� emacs, emacs-standard, "
+"emacs-meta,\n"
+"                          emacs-ctlx, vi, vi-move, vi-command, �よ� vi-"
+"insert��。\n"
+"      -l                 関数�一覧を表示�る。\n"
+"      -P                 関数��よ�キー割り当�一覧を表示�る。\n"
+"      -p                 入力����利用�能�形���関数��キー割り当�を"
+"一覧\n"
+"                         表示�る\n"
+"      -S                 マクロを起動�るキーシーケンス���値を一覧表示�"
+"ã‚‹\n"
+"      -s                 入力����利用�能�形���マクロを起動�る\n"
+"                         キーシーケンス���値を一覧表示�る\n"
+"      -V                 変数��値�一覧を表示�る\n"
+"      -v                 入力����利用�能�形���変数��値を一覧\n"
+"                         表示�る\n"
+"      -q  function-name  関数����キー�よ��起動�れる�探索�る\n"
+"      -u  function-name  関数���インド�れ�����キーを解除�る\n"
+"      -r  keyseq         KEYSEQ �対�る割り当�を解除�る\n"
+"      -f  filename       FILENAME �らキー�インドを読�込む\n"
+"      -x  keyseq:shell-command\tKEYSEQ �入力�れ�時� SHELL-COMMAND \n"
+"    \t\t\t\t�実行�れるよ���る\n"
+"      -X\t\t 入力����利用�能�形�� -x �よ��割り当�\n"
+"                         られ�キーシーケンス�コマンドを一覧表示�る\n"
+"    \n"
+"    終了ステータス:\n"
+"    bind �解釈����オプション�渡�れ�場��よ�エラー�発生��場�\n"
+"    を除� 0 を返���。"
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"for� while���� until ループを脱出���。\n"
+"    \n"
+"    FOR� WHILE���� UNTIL ループを脱出���  も� N �指定�れ��る場"
+"��\n"
+"    N階層�ループを終了���。\n"
+"    \n"
+"    終了ステータス:\n"
+"    N �1未満�場�を除��終了ステータス� 0 ��。"
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"for, while, ��� until ループを�開���。\n"
+"    \n"
+"    FOR, WHILE ��� UNTIL ループ�次�繰り返�を�開���。\n"
+"    も� N �指定�れ�場��N 階層�ループを�開���。\n"
+"    \n"
+"    終了ステータス:\n"
+"    N  �1未満�場�を除��終了ステータス� 0 ��。"
+
+#: builtins.c:354
+#, fuzzy
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"シェル組�込�コマンドを実行���。\n"
+"    \n"
+"    コマンドを検索����シェル組�込�コマンドを ARG を���実行�\n"
+"    ��。�れ�シェル組�込�コマンドをシェル関数���実装�る��関数\n"
+"    内�組�込�コマンドを実行�る必���る場��役�立���。\n"
+"    \n"
+"    終了ステータス:\n"
+"    シェル組�込�コマンド�終了ステータスを返���。シェル組�込�コマ\n"
+"    ンド�無�場�� false を返���。"
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"�在�サブルー�ン呼�出��コンテキストを返���。\n"
+"    \n"
+"    EXPR �無�場� \"$line $filename\" を返���。  EXPR ��る場��\n"
+"    \"$line $subroutine $filename\" を返���。��追加�情報�スタックト"
+"レース\n"
+"    を�供�る時�利用���。\n"
+"    \n"
+"    EXPR �値��在�フレーム�戻る���何回フレーム�呼�出�れ��る�を\n"
+"    �味���。最上��フレーム� 0 ��。\n"
+"    \n"
+"    終了ステータス:\n"
+"    シェル�関数を実行������ EXPR �無効�場�を除� 0 を返���。"
+
+#: builtins.c:387
+#, fuzzy
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"シェル�作業ディレクトリを変更���。\n"
+"    \n"
+"    カレントディレクトリを DIR �変更���。DIR �デフォルト� HOME シェル\n"
+"    変数�値��。\n"
+"    \n"
+"    変数 CDPATH � DIR を�ん��る検索パスを定義���。CDPATH ��コロン"
+"(:)\n"
+"    �区切られ�代替ディレクトリ�を指定���。\n"
+"    値���ディレクトリ��カレントディレクトリ��義��。 DIR �\n"
+"    スラッシュ (/) �ら始�る場�� CDPATH �使用�れ��ん。\n"
+"    \n"
+"    ディレクトリ�見��ら����� `cdabl_vars' シェルオプション�設定�れ"
+"�\n"
+"    �る場��引数�変数����扱�れ��。��変数�値��る場����値"
+"�\n"
+"    DIR ���扱�れ��。\n"
+"    \n"
+"    オプション:\n"
+"        -L\tシンボリックリンクを強制的���り��: resolve symbolic links "
+"in\n"
+"                DIR after processing instances of `..'\n"
+"        -P\tシンボリックリンクを��ら�物�構造を利用���: resolve\n"
+"                 symbolic links in DIR before processing instances\n"
+"    \tof `..'\n"
+"        -e\t-P オプション�与�られ�����在�作業ディレクトリ�正��\n"
+"                決定����場��終了ステータス� 0 以外�終了���\n"
+"        -@  on systems that support it, present a file with extended "
+"attributes\n"
+"            as a directory containing the file attributes\n"
+"    \n"
+"    デフォルト�� `-L' �指定�れ�場���様シンボリックリンクを��り�"
+"�。\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    終了ステータス:\n"
+"    ディレクトリを変更��場���よ� -P �使用�れ��る時� $PWD �正�"
+"�\n"
+"    設定�れ�場�� 0��れ以外� 0 以外�値��。"
+
+#: builtins.c:425
+#, fuzzy
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"カレントディレクトリ���を表示���。\n"
+"    \n"
+"    オプション:\n"
+"      -L\t$PWD �カレントディレクトリ���を指���る場�� $PWD\n"
+"    \tを表示�る\n"
+"      -P\tシンボリックリンクを辿��物�的�ディレクトリを表示�る\n"
+"    \n"
+"    デフォルト�� `pwd' � `-L' �指定�れ�よ��動作���。\n"
+"    \n"
+"    終了ステータス:\n"
+"    無効�オプション���カレントディレクトリを読�込���場�を除�\n"
+"    0を返���。"
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"何も���コマンド\n"
+"    \n"
+"    何も効果��り��ん。コマンド�何も行���ん\n"
+"    \n"
+"    終了ステータス:\n"
+"    常��功��。"
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"�果����功を返���。\n"
+"    \n"
+"    終了ステータス:\n"
+"    常��功��。"
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"�果���失敗を返���。\n"
+"    \n"
+"    終了ステータス:\n"
+"    常�失敗��。"
+
+#: builtins.c:471
+#, fuzzy
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"�純�コマンドを実行�る�コマンド�関�る情報を表示���。\n"
+"    \n"
+"    シェル関数�探索を抑止�� COMMAND を引数 ARGS �実行���。���\n"
+"    指定�� COMMANDs �情報を表示���。シェル関数������コマンド\n"
+"    �ディスク上�存在�る時�使用���。\n"
+"    \n"
+"    オプション:\n"
+"      -p\t全��標準ユーティリティ�見��る��証�れる PATH を\n"
+"    \tデフォルト�値���使用�る\n"
+"      -v\t`type'組�込�関数��様� COMMAND �説明を表示�る\n"
+"      -V\tCOMMAND �対��より冗長�説明を表示�る\n"
+"    \n"
+"    終了ステータス:\n"
+"    COMMAND �終了ステータスを返���。��� COMMAND �見��ら��時�失敗"
+"を返���。"
+
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"変数�値�よ�属性を設定���。\n"
+"    \n"
+"    変数を宣言���れ�属性を与���。NAME を指定���場�\n"
+"    ����変数�関�る属性�値を表示���。\n"
+"    \n"
+"    オプション:\n"
+"      -f\t関数��関数定義�表示を制��る\n"
+"      -F\t関数���表示�るよ��制��る (デ�ッグ中�行番��\n"
+"    \tソースファイルも追加�れる)\n"
+"      -g\tシェル関数内�使用�れ�時�大域変数を作��る。�れ以\n"
+"    \t外�場��無視�れる\n"
+"      -p\t� NAME �属性�値を表示�る\n"
+"    \n"
+"    属性を設定�るオプション:\n"
+"      -a\tNAME をインデックス型�列��る(サ�ート�れ��る場�)\n"
+"      -A\tNAME を連想�列��る(サ�ート�れ��る場�)\n"
+"      -i\tNAME �`整数型'�属性を設定�る\n"
+"      -l\tNAME �設定時�値を�文字�変��る\n"
+"      -n\tNAME �値�変数���照��るよ���る\n"
+"      -r\tNAME を読��り専用��る\n"
+"      -t\tNAME � `trace' 属性を設定�る\n"
+"      -u\tNAME 設定時�値を大文字�設定�る\n"
+"      -x\tNAME をエクス�ート�る\n"
+"    \n"
+"    `-' �代�り� `+' を使用�る�与�られ�属性を無効����。\n"
+"    \n"
+"    整数属性を与�られ�変数�値を割り当�られ�時��数値���評価�れ\n"
+"    ��。(`let' コマンド�照������。)\n"
+"\n"
+"    関数内�使用�れ�場�� `local' コマンドを使用��時��様� "
+"`declare' \n"
+"    � NAME をローカル変数����。`-g' オプション���動作を抑止���。\n"
+"    \n"
+"    終了ステータス:\n"
+"    無効�オプション�与�られ��エラー�発生����り�功を返���。"
+
+#: builtins.c:532
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"変数�値�よ�属性を設定���。\n"
+"    \n"
+"    旧���。`help declare'を�照������。"
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"ローカル変数を定義���。\n"
+"    \n"
+"    NAME ������ローカル変数を定義�値を VALUE �設定���。OPTION �\n"
+"    `declare'�������オプションを��付���。\n"
+"    \n"
+"    局所変数�シェル関数�中���使用����。宣言�れ�関数�中�よ��"
+"�\n"
+"    �関数����照����。\n"
+"    \n"
+"    終了ステータス:\n"
+"    無効�オプション�与�られる�エラー�発生�る����シェル�関数を実行"
+"����\n"
+"    場�を除��功を返���。"
+
+#: builtins.c:557
+#, fuzzy
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"引数を標準出力�書�出���。\n"
+"    \n"
+"    引数 ARG を�一空白文字�区切り�最後�改行を加��標準出力�表示��"
+"�。\n"
+"    \n"
+"    オプション:\n"
+"      -n\t最後�改行を加���\n"
+"      -e\t下記�示��ックスラッシュエスケープ�解釈を有効��る\n"
+"      -E\t�ックスラッシュエスケープ�解釈を明示的�無効��る\n"
+"    \n"
+"    `echo' ��下記��ックスラッシュエスケープ文字を解釈���:\n"
+"      \\a\tアラート (bell)\n"
+"      \\b\t�ックスペース\n"
+"      \\c\t以��出力を抑止\n"
+"      \\e\tエスケープ文字\n"
+"      \\E\tエスケープ文字\n"
+"      \\f\tフォームフィード\n"
+"      \\n\t改行\n"
+"      \\r\tキャリッジリターン\n"
+"      \\t\t水平タブ\n"
+"      \\v\t垂直タブ\n"
+"      \\\\\t�ックスラッシュ\n"
+"      \\0nnn\tASCII コード� NNN (8進数) �文字。 NNN �0�ら3個�8進数字\n"
+"      \\xHH\t値� HH (16進数) �8ビット文字。HH � 1 ���2個�16進数字\n"
+"\n"
+"    終了ステータス:\n"
+"    書�込�エラー�発生����り�功を返���。"
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"引数を標準出力�書�出���。\n"
+"    \n"
+"    引数 ARG を最後�改行を加��標準出力�表示���。\n"
+"    \n"
+"    オプション:\n"
+"      -n\t最後�改行を加���\n"
+"    \n"
+"    終了ステータス:\n"
+"    書�込�エラー�発生����り�功を返���。"
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"シェル組�込�関数を有効���無効����。\n"
+"    \n"
+"    シェル組�込�関数を有効���無効����。シェル組�込�関数を無効��"
+"る�\n"
+"    ディスク上�存在�るシェル組�込�関数������コマンドをフルパスを指"
+"定�\n"
+"    る����実行�る���出���。\n"
+"    \n"
+"    オプション:\n"
+"      -a\t組�込�関数�一覧を�れ�れ�有効���を���表示���\n"
+"      -n\tNAME を無効��る�����無効�組�込�関数一覧を表示���\n"
+"      -p\t組�込�関数一覧を�利用�能�形��表示���\n"
+"      -s\tPosix �定義�れ��る組�込�関数��表示���\n"
+"    \n"
+"    動的ロードを制御�るオプション:\n"
+"      -f\t共有オブジェクト FILENAME �ら組�込�関数 NAME を読�込���\n"
+"      -d\t-f �読�込�れ�組�込�関数を削除���\n"
+"    \n"
+"    オプション無��起動�れ�場��� NAME �有効��り��。\n"
+"    \n"
+"    $PATH 上�存在�る `test' をシェル組�込�関数�代�り�利用�る場��\n"
+"    `enable -n test'�入力������。\n"
+"    \n"
+"    終了ステータス:\n"
+"    NAME �組�込�関数�����エラー�発生����り�功を返���。"
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"引数をシェルコマンド���実行���。\n"
+"    \n"
+"    引数を一��文字列�連������果をシェル��入力���使用��\n"
+"    ���果をコマンド���実行���。\n"
+"    \n"
+"    終了ステータス:\n"
+"    コマンド�終了ステータスを返���。コマンド� null �場���功を\n"
+"    返���。"
+
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"オプション引数を解����。\n"
+"    \n"
+"    getopts ��置パラメーターをオプション���解��る際�シェル�よ�\n"
+"    �使用�れる手続��。\n"
+"    \n"
+"    OPTSTRING ���識�れるオプション�文字���れ��。文字�後�\n"
+"    コロン(:)�続�場���オプション�空白文字�オプション�ら区切\n"
+"    られ�引数を���予期�れ��。\n"
+"    \n"
+"    getopts �起動�れる����次�オプションをシェル変数 $name ��存\n"
+"    ���。name �存在���場���期化�れ��。���処��る必��\n"
+"    �る次�引数��置をシェル変数 OPTIND ��存���。OPTIND �シェル\n"
+"    ���シェルスクリプト�起動�る��� 1 ��期化�れ��。オプショ\n"
+"    ン�引数��求�れる場��getopt �引数をシェル変数 OPTARG ��存�\n"
+"    ��。\n"
+"    \n"
+"    getopts �エラーを2��方法���れ��報告���。OPTSTRING�最�\n"
+"    �文字�コロン (:) �場��getopts �サイレントエラー報告を使用�\n"
+"    ��。��モード��エラーメッセージ�表示�れ��ん。無効�オプシ\n"
+"    ョンを見���時� getopts �オプション�文字を OPTARG �設定��\n"
+"    �。必��オプション引数�見��ら��場���getopts � NAME �\n"
+"    ':' を設定��OPTARG �オプション�文字を設定���。getopts �\n"
+"    サイレントモード�無�場��無効�オプションを見���時�getopts \n"
+"    � NAME � '?' を設定��OPTARG を未定義状態����。���\n"
+"    診断メッセージを表示���。\n"
+"    \n"
+"    シェル変数 OPTERR �値� 0 �場��getopts � OPTSTRING �最��\n"
+"    コロン (:) �������ら�エラーメッセージ�表示を抑止���。\n"
+"    OPTERR �デフォルト値� 1 ��。\n"
+"    \n"
+"    getopts ��通常�置パラメーター ($0 - $9) を解����。���\n"
+"    他�引数�与�られ�場���れら�解��れ��。\n"
+"    \n"
+"    終了ステータス:\n"
+"    オプション�見����場���功を返���。オプション�終�り\n"
+"    �到��る�エラー�発生��時�失敗を返���。"
+
+#: builtins.c:694
+#, fuzzy
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"シェルを与�られ�コマンド�置����。\n"
+"    \n"
+"    指定��プログラム�シェルを置��� COMMAND を実行���。ARGUMENTS �\n"
+"    COMMAND �引数��り��。も� COMMAND �指定�れ��場����在�シェ"
+"ル\n"
+"    �対�る全��リダイレクト�行�れ��。\n"
+"    \n"
+"    オプション:\n"
+"      -a name\tNAME を COMMAND � 0 番目�引数���与���\n"
+"      -c\t\tCOMMAND を環境変数���実行���\n"
+"      -l\t\tdash(-) を COMMAND � 0 番目�引数����\n"
+"    \n"
+"    も�コマンド�実行����場���対話的�シェル�終了��対話的�シェル"
+"�\n"
+"    オプション `execfail' �設定�れ��。\n"
+"    \n"
+"    終了ステータス:\n"
+"    COMMAND �見��ら���リダイレクトエラー�発生����り�功を返��"
+"�。"
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"シェルを終了���。\n"
+"    \n"
+"    終了ステータス N �シェルを終了���。 N を指定���場��\n"
+"    最後�実行��コマンド�終了ステータス��り��。"
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"ログインシェルを終了���。\n"
+"    \n"
+"    終了ステータス N �ログインシェルを終了���。実行����ログインシェ"
+"ル\n"
+"    内�無�場��エラーを返���。"
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"ヒストリ一覧�らコマンドを表示���実行���。\n"
+"    \n"
+"    fc �ヒストリ一覧を表示���編集��コマンドを�実行�る���使用��"
+"�。\n"
+"    FIRST �よ� LAST �範囲を指定�る数値��。FIRST �文字列を指定�る��"
+"ã‚‚\n"
+"    ����。��場����文字列�始�る直近�実行��コマンドを表��"
+"�。\n"
+"    \n"
+"    オプション:\n"
+"      -e ENAME\t使用�るエディタを�択���。デフォルト� FCEDIT ��次� "
+"EDITOR�\n"
+"     \t\t��� vi �順��。\n"
+"      -l \t編集����行を一覧表示���\n"
+"      -n\t一覧表示時�行番�を表示���ん\n"
+"      -r\t行を逆順���� (最新�コマンドを最���る)\n"
+"    \n"
+"    `fc -s [pat=rep ...] [command]' 形�を使用�る��COMMAND �\n"
+"    OLD=NEW �置��行�れ�後��実行�れ��。\n"
+"    \n"
+"    �れを使��使�や��エイリアス� r='fc -s' ��。�れ� `r cc' を実行�"
+"ã‚‹\n"
+"    �最後�実行�� cc �始�るコマンド�実行�れ��。`r' �直��コマンド"
+"�\n"
+"    実行�れ��。\n"
+"    \n"
+"    終了ステータス:\n"
+"    実行��コマンド�ステータス����功�帰り��。エラー�発生��場�� "
+"0 \n"
+"    以外�値��り��。"
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"ジョブをフォアグランド����。\n"
+"    \n"
+"    JOB_SPEC �識別�れ�ジョブをフォアグランド�����在�ジョブ���"
+"�。\n"
+"    も� JOB_SPEC �存在���場��シェル��在�レントジョブ���考���"
+"ã‚‹\n"
+"    も��利用�れ��。\n"
+"    \n"
+"    \n"
+"    終了ステータス:\n"
+"    フォアグラウンド����コマンド�ステータスを返���。����エラー"
+"�\n"
+"    発生��時�失敗を返���。"
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"ジョブを�ックグラウンド����。\n"
+"    \n"
+"    JOB_SPEC �識別�れるジョブを `&' �共�始��時�よ���ックグラウンド"
+"�\n"
+"    ���。も� JOB_SPEC �存在���場��シェル��在�ジョブ���考��"
+"�\n"
+"    るも��利用�れ��。\n"
+"    \n"
+"    終了ステータス:\n"
+"    ジョブ制御�有効��������エラー�発生����り�功を返���。"
+
+#: builtins.c:793
+#, fuzzy
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"プログラム��置を記憶���表示���。\n"
+"    \n"
+"    �コマンド NAME �フルパスを決定�記憶���。も�引数�与�られ����"
+"場��\n"
+"    記憶���るコマンド�情報�表示�れ��。\n"
+"    \n"
+"    オプション:\n"
+"      -d\t\t� NAME �対��記憶���る情報を消去���\n"
+"      -l\t\t入力�����能�形��表示���\n"
+"      -p pathname\tNAME �フルパス���� PATHNAME を使用���\n"
+"      -r\t\t全��記憶���る�置情報を消去���\n"
+"      -t\t\t� NAME �対��記憶���る�置を表示���。複数� NAME\n"
+"    \t\t�与�られ�場���置を表示�る��対象��る NAME を表示���。\n"
+"    引数:\n"
+"      NAME\t\t� NAME � $PATH �中を探索�れ�記録�れ�コマンド一覧�\n"
+"    \t\t追加�れ��。\n"
+"    \n"
+"    終了ステータス:\n"
+"    NAME �見��ら����無効�オプション�与�られ���り�功を返���。"
+
+#: builtins.c:818
+#, fuzzy
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"組�込�コマンド�情報を表示���。\n"
+"    \n"
+"    組�込�コマンド�関�る簡潔��約を表示���。も� PATTERN �\n"
+"    指定�れ�場���PATTERN �一致�る全��コマンド�対�る詳細�\n"
+"    ヘルプを表示���。�れ以外�ヘルプトピックを表示���。\n"
+"    \n"
+"    オプション:\n"
+"      -d\t�ヘルプトピック�対��短�説明を出力���\n"
+"      -m\t使用法を擬似的� man ページ形��表示���\n"
+"      -s\t一致���トピック�対��簡��使用法��を表示���\n"
+"    \tPATTERN\n"
+"    \n"
+"    引数:\n"
+"      PATTERN\tヘルプトピックを指定�るパターン\n"
+"    \n"
+"    終了ステータス:\n"
+"    PATTERN �見��ら���無効�オプション�与�られ���り�功を返��"
+"�。"
+
+#: builtins.c:842
+#, fuzzy
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"ヒストリ一覧を表示����作���。\n"
+"    \n"
+"    行番�を���ヒストリを表示���。�作���項目����`*'�付��"
+"�。\n"
+"    引数 N ��る場��最後� N 個�項目��を表示���。\n"
+"    \n"
+"    オプション:\n"
+"      -c\tヒストリ一覧�ら全��項目を削除���。\n"
+"      -d offset\tOFFSET 番目�ヒストリ項目を削除���。\n"
+"    \n"
+"      -a\t��セッション�らヒストリファイル�行を追加���\n"
+"      -n\tヒストリファイル�ら��読�込�れ����行を全�読�込���\n"
+"      -r\tヒストリファイルを読�込��内容をヒストリ一覧�追加���\n"
+"      -w\t�在�ヒストリをヒストリファイル�書�込���。����れらを\n"
+"    \tヒストリ一覧�追加���\n"
+"    \n"
+"      -p\t� ARG �対��ヒストリ展開を実行���果をヒストリ一覧�追加�\n"
+"    \t����表示���\n"
+"      -s\tARG を�一�項目���ヒストリ一覧�追加���\n"
+"    \n"
+"    FILENAME を与��場��FILENAME �ヒストリファイルを��使用�れ��。�"
+"れ�\n"
+"    無��$HISTFILE �値��る場���値�使用�れ��。�����れ� \n"
+"    ~/.bash_history �使用�れ��。\n"
+"\n"
+"    も� $HISTTIMEFORMAT 変数�設定�れ�NULL �無�れ��strftime(3) �書"
+"�\n"
+"    文字列����ヒストリ項目�時刻を表示�る際�使用�れ��。�れ以外�\n"
+"    時刻�表示�れ��ん。\n"
+"    \n"
+"    終了ステータス:\n"
+"    無効�オプション�与�られる�エラー�発生����り�功を返���。"
+
+#: builtins.c:879
+#, fuzzy
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"ジョブ�ステータスを表示���。\n"
+"    \n"
+"    アクティブ�ジョブを一覧表示���。JOBSPEC �ジョブ�出力を制���"
+"�。\n"
+"    オプション���場�全��アクティブ�ジョブ�ステータス�表示�れ�"
+"�。\n"
+"    \n"
+"    オプション:\n"
+"      -l\t通常�情報�加��プロセスIDを一覧表示�る\n"
+"      -n\t最後�通知�らステータス�変更����プロセス��一覧表示\n"
+"    \t�る\n"
+"      -p\tプロセスID��を一覧表示�る\n"
+"      -r\t実行中�ジョブ�出力を制��る\n"
+"      -s\t�止中�ジョブ�出力を制��る\n"
+"    \n"
+"    -x �指定�れ�場�� COMMAND � ARGS ��れるジョブをプロセスグルー\n"
+"    プリーダー�プロセス ID �置����全��ジョブ指定�後�実行�れ�"
+"�。\n"
+"    \n"
+"    終了ステータス:\n"
+"    無効�オプション�与�られる�エラー�発生����り�功を返���。\n"
+"    も� -x �使用�れ�場��COMMAND �終了ステータスを返���。"
+
+#: builtins.c:906
+#, fuzzy
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"�在�シェル�らジョブを削除���。\n"
+"    \n"
+"    アクティブ�ジョブ�テーブル�ら�引数� JOBSPEC を削除���。JOBSPEC �"
+"指定\n"
+"    �れ��場��シェル��在�ジョブ�考���るも��使用�れ��。\n"
+"    \n"
+"    オプション:\n"
+"      -a\tJOBSPEC �与�られ��時�全��ジョブを削除�る\n"
+"      -h\tシェル� SIGHUP を�����時�� JOBSPEC �ジョブ�対�� "
+"SIGHUP \n"
+"    \t��られ��よ��マーク�る\n"
+"      -r\t実行中�ジョブ��削除�る\n"
+"    \n"
+"    終了ステータス:\n"
+"    無効�オプション� JOBSPEC �与�られ���り�功を返���。"
+
+#: builtins.c:925
+#, fuzzy
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"ジョブ�シグナルを�り��。\n"
+"    \n"
+"    PID ��� JOBSPEC �識別�れるプロセス� SIGSPEC ��� SIGNUM ��付�"
+"ら\n"
+"    れるシグナルを�り��。も� SIGSPEC も SIGNUM も指定�れ��場��"
+"SIGTERM\n"
+"    �見��れ��。\n"
+"    \n"
+"    オプション:\n"
+"      -s sig\tSIG をシグナル���る\n"
+"      -n sig\tSIG をシグナル番���る\n"
+"      -l\tシグナル�を一覧表示�る。-l �後�引数�続��場��\n"
+"    \t�れら�一覧表示�れる��シグナル番���る�見��れる\n"
+"    \n"
+"    Kill �次�2���由�らシェル組�込�関数��。一��プロセスID�代�り"
+"�\n"
+"    ジョブIDを使用��るよ���る����。も�一��作���プロセス�制�"
+"�\n"
+"    ���時�プロセスを kill �る�����るよ���る����。\n"
+"    \n"
+"    終了ステータス:\n"
+"    無効�オプション�与�られる�エラー�発生����り�功を返���。"
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"数�を評価���。\n"
+"    \n"
+"    � ARG を数����評価���。評価�固定長�整数���行�れ��溢れ�\n"
+"    検査�れ��ん。����0 �よる除算����れエラー���フラグ�\n"
+"    立���。次�演算�一覧��一優先順��演算����グループ化�れ��\n"
+"    ��。優先順���順�������。\n"
+"    \n"
+"    \tid++, id--\t変数�後置インクリメント�デクリメント\n"
+"    \t++id, --id\t変数��置インクリメント�デクリメント\n"
+"    \t-, +\t\t�項マイナス�プラス\n"
+"    \t!, ~\t\t論��よ�ビット�定\n"
+"    \t**\t\t指数演算\n"
+"    \t*, /, %\t\t乗算�除算�剰余演算\n"
+"    \t+, -\t\t加算�減算\n"
+"    \t<<, >>\t\t左�よ��ビットシフト\n"
+"    \t<=, >=, <, >\t比較\n"
+"    \t==, !=\t\t等価��等価\n"
+"    \t&\t\tビット論��\n"
+"    \t^\t\tビット排他的論�和\n"
+"    \t|\t\tビット論�和\n"
+"    \t&&\t\t論��\n"
+"    \t||\t\t論�和\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\t�件演算�\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\t代入\n"
+"    \n"
+"    シェル変数�被演算����使用����。変数��数�内� (強制的�固定"
+"é•·\n"
+"    整数�) 値�置���られ��。変数�数�内�使用�る時��必��も\n"
+"    整数属性を����る必���り��ん。\n"
+"\n"
+"    演算��優先順��順�評価�れ��。�括弧���られ�数��先�評価�"
+"れ�\n"
+"    上記�優先順�を上書��る�も�れ��ん。\n"
+"    \n"
+"    終了ステータス:\n"
+"    ARG �最終的�評価値� 0 �場� let � 1 を返���。�れ以外�場��\n"
+"     let � 0 を返���。"
+
+#: builtins.c:994
+#, fuzzy
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"標準入力�ら一行読�込�フィールド毎�分割���。\n"
+"    \n"
+"    標準入力�ら一行読�込���。��� -u �指定�れ��る場��ファイル記"
+"è¿°å­�\n"
+"    FD �ら読�込���。行��語分割�よ��フィールド�分割�れ�最���語"
+"�\n"
+"    最�� NAME ��2番目��語�2番目� NAME ����順�割り当�られ��。"
+"残�\n"
+"    ��語�全�最後� NAME �割り当�られ��。変数 $IFS �設定�れ�文字�"
+"��\n"
+"    �語�区切り����識�れ��。\n"
+"    \n"
+"    も� NAME を指定�����場��行� REPLY 変数��存�れ��。\n"
+"    \n"
+"    オプション:\n"
+"      -a array\t読�込ん��語をインデックス型�列 ARRAY �順番�割り当��"
+"�。\n"
+"    \t\t開始番�� 0 ��。\n"
+"      -d delim\t改行����文字 DELIM �最���れる��読�込�を続���\n"
+"      -e\t\t対話的シェル�行を得る�� Readline を使用���\n"
+"      -i text\tReadline ��期テキスト��� TEXT を使用���\n"
+"      -n nchars\t改行�無��も文字数 NCHARS を読�込ん�ら復帰���。"
+"NCHARS\n"
+"    \t\tより��区切り文字 (DELIMITER) ��れ�場��区切り文字�\n"
+"    \t\t優先�れ��\n"
+"      -N nchars\t厳密�文字数 NCHARS を読�込�復帰���。����ファイル"
+"終\n"
+"    \t\t了(EOF) ��る�読�込�タイムアウト�発生��場��除���。\n"
+"    \t\t区切り文字 (DELIMITER) �無視�れ��\n"
+"      -p prompt\t読�込���文字列 PROMPT を後��改行を付����表示��"
+"�\n"
+"      -r\t\t�ックスペース�文字をエスケープ�る��を�止���\n"
+"      -s\t\t端末�ら読�込�れる文字をエコー�ック���ん\n"
+"      -t timeout\tTIMEOUT 秒以内�入力行�完全�読�込�れ����場�\n"
+"    \t\tタイムアウトを発生��失敗���復帰���。TMOUT 変数�値�\n"
+"    \t\tデフォルト�タイムアウト��。TIMEOUT を�数��る��も��\n"
+"    \t\t��。も� TIMEOUT � 0 �場��read �何�データも読�込�\n"
+"    \t\t��直��終了��指定��ファイル記述��入力�使用�能�場\n"
+"    \t\t����功返���。タイムアウト発生時�終了ステータス�128\n"
+"    \t\tより大���り��\n"
+"      -u fd\t\t読�込��標準入力����ファイル記述� FD を使用���\n"
+"    \n"
+"    終了ステータス:\n"
+"    ファイル終了(EOF)�読�込�タイムアウト(��場��128以上)�変数��代入"
+"エ\n"
+"    ラー�発生� -u �無効�ファイル記述��与�られ�場�を除�0を返���。"
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"シェル関数�ら復帰���。\n"
+"    \n"
+"    N �指定��値を戻り値���関数��� source �れ�スクリプトを終了��"
+"�。\n"
+"    N �指定�れ��場��関数���スクリプト�最後�実行��コマンド�戻り"
+"値\n"
+"    �使用�れ��。\n"
+"    \n"
+"    終了ステータス:\n"
+"    戻り値 N����シェル�関数���スクリプトを実行�����場��失敗"
+"ã‚’\n"
+"    返���。"
+
+#: builtins.c:1054
+#, fuzzy
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"シェルオプションや�置パラメーター�値を設定・消去���\n"
+"    \n"
+"    シェル属性や�置パラメーター�値を変更����シェル変数����値\n"
+"    を表示���。\n"
+"    \n"
+"    オプション:\n"
+"      -a  変数を変更���変更��エクス�ート�るよ��マーク�る\n"
+"      -b  ジョブ終了を�時通知�る\n"
+"      -e  コマンド�終了ステータス� 0 以外�場���時終了�る\n"
+"      -f  ファイル�生� (globbing) を無効��る\n"
+"      -h  検索��コマンド��置を記憶�る\n"
+"      -k  全��値を設定�る引数�コマンド実行時�環境��置�れる。コ\n"
+"          マンド�����るも���ら��\n"
+"      -m  ジョブ制御を有効��る\n"
+"      -n  コマンドを読�込む�実行���\n"
+"      -o option-name\n"
+"          option-name �対応��変数を設定�る:\n"
+"              allexport    -a ��様\n"
+"              braceexpand  -B ��様\n"
+"              emacs        emacs スタイル�行編集インターフェースを使用\n"
+"              errexit      -e ��様\n"
+"              errtrace     -E ��様\n"
+"              functrace    -T ��様\n"
+"              hashall      -h ��様\n"
+"              histexpand   -H ��様\n"
+"              history      コマンドヒストリを有効��る\n"
+"              ignoreeof    ファイル終了 (EOF) 読�込�時�シェルを終了\n"
+"                           ���\n"
+"              interactive-comments\n"
+"                           対話コマンド�コメント�使用を許��る\n"
+"              keyword      -k ��様\n"
+"              monitor      -m ��様\n"
+"              noclobber    -C ��様\n"
+"              noexec       -n ��様\n"
+"              noglob       -f ��様\n"
+"              nolog        ��付�られる�無視�れる\n"
+"              notify       -b ��様\n"
+"              nounset      -u ��様\n"
+"              onecmd       -t ��様\n"
+"              physical     -P ��様\n"
+"              pipefail     パイプライン�戻り値を最後� 0 以外�終了��コ"
+"マ\n"
+"                           ンド�終了ステータス��る。0 以外�ステータス�\n"
+"                           終了��コマンド�無�場��� 0 ��る。\n"
+"              posix        Posix 標準�デフォルト動作�異�る bash �動作を\n"
+"                           Posix �一致�るよ���る\n"
+"              privileged   -p ��様\n"
+"              verbose      -v ��様\n"
+"              vi           vi スタイル�行編集インターフェースを使用�る\n"
+"              xtrace       -x ��様\n"
+"      -p  実 uid �実効 uid �異�る時�常�オン��る。$ENV ファイル�処�\n"
+"          �よ�シェル関数�イン�ート�無効��る。��オプションをオフ�\n"
+"          �る�実効 uid, gid �実 uid, gid ����設定�れる\n"
+"      -t  一��コマンドを読�込��実行��後�終了�る\n"
+"      -u  代入時�変数を未設定��る�エラー���扱�\n"
+"      -v  シェル�入力行を読�込ん�通り�表示�る\n"
+"      -x  実行�れるコマンド�引数を��通り�表示�る\n"
+"      -B  中括弧�展開をシェル�行�\n"
+"      -C  設定��場��リダイレクト�既存�通常ファイルを上書��る��を\n"
+"          �止�る\n"
+"      -E  設定��場� ERR トラップ�シェル関数�継承�れる\n"
+"      -H  ! スタイル�ヒストリ置�を有効��る。��フラグ�対話的シェル�\n"
+"          �デフォルト�オン��る\n"
+"      -P  設定��場�� cd ���カレントディレクトリを変更�るコマンドを\n"
+"          実行��時�シンボリックリンクを辿ら��\n"
+"      -T  設定��場�� DEBUG トラップ�シェル関数�継承�れる\n"
+"      --  �れ以��引数を�置パラメーター���割り当�る。も��れ以��\n"
+"          引数�無�場���置パラメーター�設定解除�れる\n"
+"      -   �れ以��引数を�置パラメーター���割り当�る。-x � -v \n"
+"          オプション�オフ��る\n"
+"    \n"
+"    - �代�り� + を使用�る��フラグ�オフ��り��。フラグ�シェル�起\n"
+"    動時�も使用�る��も����。�在�設定�れ��るフラグ�組� $- �\n"
+"    得られ��。残り� n 個�引数 ARG ��置パラメータ���$1, $2, .. $n\n"
+"    �順�設定�れ��。も�引数 ARG �与�られ��場��全��シェル変数�\n"
+"    表示�れ��。\n"
+"    \n"
+"    終了ステータス:\n"
+"    無効�オプション�与�られ���り�功を返���。"
+
+#: builtins.c:1139
+#, fuzzy
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"シェル変数�よ�関数�値・属性を消去���。\n"
+"    \n"
+"    � NAME�対��関連�る値���関数を削除���。\n"
+"    \n"
+"    オプション:\n"
+"      -f\t� NAME をシェル関数���扱�\n"
+"      -v\t� NAME をシェル変数���扱�\n"
+"      -n\t� NAME を���照���扱��変数自身を消去�る。�照���\n"
+"\t\t評価����。              \n"
+"    \n"
+"    オプション�無�場��最��変数を消去�よ��試���。失敗��場��"
+"�\n"
+"    関数を消去�よ��試���。\n"
+"    \n"
+"    �����変数�消去����ん。`readonly' も�照������。\n"
+"    \n"
+"    終了ステータス:\n"
+"    無効�オプション�与�られる� NAME �読��り専用�場�を除��功を返�"
+"��。"
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"シェル変数� export 属性を設定���。\n"
+"    \n"
+"    � NAME �対��後�続��実行�れるコマンド�環境変数���自動的�\n"
+"    エクス�ート�れるよ��マーク���。VALUE �与�られ�場��エクス\n"
+"    �ート�る��値を設定���。\n"
+"\n"
+"    オプション:\n"
+"      -f\tシェル関数を�照���\n"
+"      -n\t� NAME �対��エクス�ート属性を削除���\n"
+"      -p\t全��エクス�ート�れ�変数・関数一覧を表示���\n"
+"    \n"
+"    引数 `--' 以��オプション���処��れ��ん。\n"
+"    \n"
+"    終了ステータス:\n"
+"    無効�オプション�与�られる��無効� NAME �与�られ���り�功\n"
+"    を返���。"
+
+#: builtins.c:1180
+#, fuzzy
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"シェル変数を変更������。\n"
+"    \n"
+"    � NAME を読��り専用����。�れら� NAME �値��れ以��代入�\n"
+"    変更������り��。VALUE �与�られ�場��読��り専用��る�\n"
+"    �値�設定�れ��。\n"
+"    \n"
+"    オプション:\n"
+"      -a\tインデックス型�列変数を示���\n"
+"      -A\t連想�列変数を示���\n"
+"      -f\tシェル関数を示���\n"
+"      -p\t全��読��り専用変数・関数�一覧を表示���。-fオプシ\n"
+"\t\t  ョン��る�����動作�変�り��。\n"
+"    \n"
+"    引数 `--' �以��オプション処�を無効����\n"
+"    \n"
+"    終了ステータス:\n"
+"    無効�オプション�与�られる��与�られ� NAME �無効�場�を除��功\n"
+"    を返���。"
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"�置パラメーターをシフト���。\n"
+"    \n"
+"    �置パラメーター� $N+1,$N+2 ... を $1,$2 ... �変更���。 \n"
+"    N �与�られ����場��1 �見��れ��。\n"
+"    \n"
+"    終了ステータス:\n"
+"    N�負�値��� $# より大��場�を除��功を返���。"
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"ファイルを読�込��在�シェル�コマンドを実行���。\n"
+"    \n"
+"    FILENAME を読�込��在�シェル�コマンドを実行���。$PATH �項目�\n"
+"    FILENAME ���れるディレクトリを見��る���使用�れ��。引数\n"
+"    ARGUMENTS �与�られ�場� FILENAME を実行�る際��置パラメーター�\n"
+"    ��使用�れ��。\n"
+"    \n"
+"    終了ステータス:\n"
+"    FILENAME �最後�実行��コマンド�ステータスを返���。FILENAME �\n"
+"    読�込�����場��失敗を返���。"
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"シェル�実行を一時�止���。\n"
+"    \n"
+"    SIGCONT シグナルを���る����シェル�実行を一時�止���。強制\n"
+"    オプション�無��りログインシェル�一時�止����ん。\n"
+"    \n"
+"    オプション:\n"
+"      -f\tシェル�ログインシェル����も強制的�一時�止�る\n"
+"    \n"
+"    終了ステータス:\n"
+"    ジョブ制御�有効����エラー�発生����り�功を返���。"
+
+#: builtins.c:1261
+#, fuzzy
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"�件�を評価���。\n"
+"    \n"
+"    � EXPR ��果�応�� 0 (真�true) ��� 1 (��false) を返���。\n"
+"    ���項演算����二項演算���。�項演算��ファイル�ステータス\n"
+"    を評価�る���使用�れ��。文字列演算��数値比較演算�も加��\n"
+"    存在���。\n"
+"    \n"
+"    ファイル演算�:\n"
+"    \n"
+"      -a FILE        ファイル�存在�る時�真(true)\n"
+"      -b FILE        ファイル�ブロック特殊デ�イス�時�真(true)\n"
+"      -c FILE        ファイル�キャラクタ特殊デ�イス�時�真(true)\n"
+"      -d FILE        ファイル�ディレクトリ�時�真(true)\n"
+"      -e FILE        ファイル�存在�る時�真(true)\n"
+"      -f FILE        ファイル�存在��通常ファイル�時�真(true)\n"
+"      -g FILE        ファイル� setgid �設定�れ��る時�真(true)\n"
+"      -h FILE        ファイル�シンボリックリンク�時�真(true)\n"
+"      -L FILE        ファイル�シンボリックリンク�時�真(true)\n"
+"      -k FILE        ファイル� sticky ビット�設定�れ��る時�真(true)\n"
+"      -p FILE        ファイル���付�パイプ�時�真(true)\n"
+"      -r FILE        ファイル�ユーザ�対��読�込��能�時�真(true)\n"
+"      -s FILE        ファイル�存在����空ファイル���場��真(true)\n"
+"      -S FILE        ファイル�ソケット�場��真(true)\n"
+"      -t FD          FD(ファイル識別�) �端末�開���る時�真(true)\n"
+"      -u FILE        ファイル� setuid �設定�れ��る時�真(true)\n"
+"      -w FILE        ファイル�ユーザ�対��書�込��能�時�真(true)\n"
+"      -x FILE        ファイル�ユーザ�対��実行�能�時�真(true)\n"
+"      -O FILE        ファイルをユーザ�実効的�所有�れ��る時�真(true)\n"
+"      -G FILE        ファイル�グループ�ユーザ�実効的�所属���る時�真"
+"(true)\n"
+"      -N FILE        ファイルを最後�読�込ん�以��変更�れ��る時�真"
+"(true)\n"
+"    \n"
+"      FILE1 -nt FILE2  file1 � file2 より新��時(更新時間�基��)�真"
+"(true)\n"
+"                       \n"
+"    \n"
+"      FILE1 -ot FILE2  file1 � file2 より��時�真(true)\n"
+"    \n"
+"      FILE1 -ef FILE2  file1 � file2 �対�る�ードリンク�時�真(true)\n"
+"    \n"
+"    文字列演算�:\n"
+"    \n"
+"      -z STRING      文字列�空�時�真(true)\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      文字列�空���時�真(true)\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     文字列��一�時�真(true)\n"
+"      STRING1 != STRING2\n"
+"                     文字列��一���時�真(true)\n"
+"      STRING1 < STRING2\n"
+"                     辞書順� STRING1 � STRING2 より��時�真(true)\n"
+"      STRING1 > STRING2\n"
+"                     辞書順� STRING1 � STRING2 より後�時�真(true)\n"
+"    \n"
+"    ��他演算�:\n"
+"    \n"
+"      -o OPTION      シェルオプション OPTION �有効�時�真(true)\n"
+"      -v VAR         シェル変数 VAR �設定�れ��る時�真(true)\n"
+"      -R VAR         シェル変数 VAR �設定�れ����照�時�真(true)\n"
+"      ! EXPR         � expr ��(fales)�時�真(true)\n"
+"      EXPR1 -a EXPR2 � expr1 �よ� expr2 �両方�も真(true)�時�真(true)\n"
+"      EXPR1 -o EXPR2 � expr1 ��� expr2 ���れ��真(true)�時�真"
+"(true)\n"
+"    \n"
+"      arg1 OP arg2   数値比較演算を行��。OP � -eq, -ne, -lt, -le, -gt,\n"
+"                     ��� -ge ���れ���る。\n"
+"    \n"
+"    数値演算二項演算�� ARG1 � ARG2 �関係��れ�れ�等��(-eq)�\n"
+"    等����(-ne)�より���(-lt)�以下(-le)�より大��(-gt)����\n"
+"    以上(-ge)�時�真(true)を返���。\n"
+"    \n"
+"    終了ステータス:\n"
+"    � EXPR �評価値�真(true)�時��功を返���。EXPR �評価値��(false) "
+"���\n"
+"    引数�無効�場��失敗を返���。"
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"�件�を評価���。\n"
+"    \n"
+"    �れ� test 組�込�関数��義語��。����最後�引数�開始�`['�一"
+"致\n"
+"    �るよ��文字`]'を与���れ�����ん。"
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"プロセス�時間を表示���。\n"
+"    \n"
+"    シェル����プロセス�使用��ユーザー時間�システム時間�れ�れ�累�"
+"ã‚’\n"
+"    表示���。\n"
+"    \n"
+"    終了ステータス:\n"
+"    常��功を返���。"
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"シグナル���他�イベントをトラップ���。\n"
+"    \n"
+"    シェル�シグナルを���る�他��件�発生��時�実行�れる�ンドラー"
+"ã‚’\n"
+"    定義�よ�有効化���。\n"
+"    \n"
+"    ARG �シグナル SIGNAL_SPEC を�����時�読�込�れ実行�れるコマンド\n"
+"    ��。も� ARG �無� (��シグナル SIGNAL_SPEC �与�られ�場�) ��"
+"�\n"
+"    `-' �場���指定��シグナル�オリジナル�値�リセット�れ��。\n"
+"    ARG � NULL 文字列�場���シグナル SIGNAL_SPEC �シェル��よ�起動�\n"
+"    れ�コマンド�よ��無視�れ��。\n"
+"    \n"
+"    も� SIGNAL_SPEC � EXIT (0) �場��ARG �シェル�終了時�実行�れ�"
+"�。\n"
+"    も� SIGNAL_SPEC � DEBUG �場� ARG ���毎回コマンド���実行�れ�"
+"�。\n"
+"    も� SIGNAL_SPEC � RETURN �場� ARG �シェル関数��� . � source �\n"
+"    よ��実行�れ�スクリプト�終了��時�実行�れ��。 SIGNAL_SPEC � "
+"ERR\n"
+"    �場��-e オプション�有効�場��シェル�終了�るよ��コマンド失敗�"
+"発\n"
+"    生�る���実行�れ��。\n"
+"    \n"
+"    も�引数�与�られ��場�� trap ��シグナル�割り当�られ�コマンド"
+"�\n"
+"    一覧を表示���。\n"
+"    \n"
+"    オプション:\n"
+"      -l\tシグナル��シグナル番��対応一覧を表示���\n"
+"      -p\t� SIGNAL_SPEC �関連��られ� trap コマンドを表示���\n"
+"    \n"
+"    � SIGNAL_SPEC � <signal.h> ��るシグナル��シグナル番���。シグ\n"
+"    ナル��大文字�文字を区別���ん。�� SIG 接頭辞�オプション��。\n"
+"    シグナル�シェル�対�� \"kill -signal $$\" ��る�������。\n"
+"    \n"
+"    終了ステータス:\n"
+"    SIGSPEC �無効��無効�オプションを与�られ���り�功を返���。"
+
+#: builtins.c:1400
+#, fuzzy
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"コマンド�種類�関�る情報を表示���。\n"
+"    \n"
+"    � NAME �対��コマンド����使�れ�時���よ��解釈�れる�を\n"
+"    示���。\n"
+"    \n"
+"    オプション:\n"
+"      -a\tNAME ����������る実行�能�も��全���置を表示�\n"
+"    \t��。�れ�� `-p' ��時�指定�れ����場�����エイリアス�\n"
+"    \t組�込�関数�シェル関数も����\n"
+"      -f\tシェル関数�検索を抑止���\n"
+"      -P\t� NAME �対�� PATH 探索を強制���。エイリアス�組�込�\n"
+"    \t関数�シェル関数�������も実行�れるディスク上�ファイル�を\n"
+"    \t返���\n"
+"      -p\t実行�れるディスク上�ファイル�を返���。`type -t NAME'\n"
+"    \t� `file' を返���場��何も返���ん。\n"
+"      -t\t次���れ���語を返���。`alias', `keyword', `function',\n"
+"    \t `builtin', `file' or `'。�れ�れ NAME �エイリアス�シェル予約語�\n"
+"    \tシェル関数�シェル組�込�関数�ディスク上�ファイル�何も見��ら�"
+"�\n"
+"    \t�対応���。\n"
+"    \n"
+"    引数:\n"
+"      NAME\t解釈�るコマンド�����。\n"
+"    \n"
+"    終了ステータス:\n"
+"    全�� NAME �見����場���功を返���。�れ��見��ら����場"
+"�\n"
+"    �失敗を返���。"
+
+#: builtins.c:1431
+#, fuzzy
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"シェル�資�制�を変更���。\n"
+"    \n"
+"    システム�シェル�資�制御を�供���る場��シェル��よ�シェル�生"
+"�\n"
+"    �るプロセス�対�る資��制御を行���。\n"
+"    \n"
+"    オプション:\n"
+"      -S\t緩� (soft) 資�制御を使用�る\n"
+"      -H\t厳�� (hard) 資�制御を使用�る\n"
+"      -a\t�在�制�を表示�る\n"
+"      -b\tソケット�大��\n"
+"      -c\t作��れるコアファイル�最大サイズ\n"
+"      -d\tプロセス�データセグメント�最大サイズ\n"
+"      -e\tスケジューリング優先度 (`nice') �最大値\n"
+"      -f\tシェル�よ����プロセス�書�込�る最大ファイルサイズ\n"
+"      -i\tシグナル抑制�最大数\n"
+"      -l\tメモリ内�固定��るプロセス�最大サイズ\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\t開�るファイル記述��最大数\n"
+"      -p\tパイプ��ッファサイズ\n"
+"      -q\tPOSIX メッセージキュー内�最大�イト数\n"
+"      -r\tリアルタイムスケジューリング優先度�最大値\n"
+"      -s\t最大スタックサイズ\n"
+"      -t\tCPU時間��最大値 (��:秒)\n"
+"      -u\tユーザプロセス�最大数\n"
+"      -v\t仮想メモリ�最大サイズ\n"
+"      -x\tファイルロック�最大数\n"
+"      -T\tスレッド�最大数\n"
+"    \n"
+"    ����プラットフォーム�����オプション�利用�能���り��ん。\n"
+"    \n"
+"    LIMIT を指定��場��指定��資��新��値�設定�れ��。`soft', \n"
+"    `hard' �よ� `unlimited' ���特別�値��在�緩や��制���在�\n"
+"    厳��制���よ�無制�を�味���。\n"
+"    LIMIT を指定���場��指定��資���在�値を表示���。オプション"
+"ã‚’\n"
+"    指定���場��-f �見��れ��。\n"
+"    \n"
+"    -t �秒���-p � 512�イト���-u �プロセス数��り��れ以外�\n"
+"    1024 �イト����。\n"
+"    \n"
+"    終了ステータス:\n"
+"    無効�オプションを与�る��エラー�発生����り��功を返���。"
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"ファイル�モードマスクを表示���設定���。\n"
+"    \n"
+"    ユーザー�ファイル作�時�マスクを MODE �設定���。MODE �指定�れ��"
+"場�\n"
+"    �在�マスク�値を表示���。\n"
+"    \n"
+"    MODE �数値�開始��場�8進数���解釈�れ��。�れ以外� chmod(1) �"
+"��\n"
+"    入れられるシンボルモード�文字列���扱�れ��。\n"
+"    \n"
+"    オプション:\n"
+"      -p\tMODE �指定�れ��場��入力����利用�能�形��表示���\n"
+"      -S\tシンボルモード�出力���。�れ以外�8進数�出力���\n"
+"    \n"
+"    終了ステータス:\n"
+"    MODE �無効��無効�オプション�与�られ���り�功を返���。"
+
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"ジョブ�実行完了を待��終了ステータスを返���。\n"
+"    \n"
+"    ID �識別�れる�プロセス (プロセスID ��� ジョブ指定) を待����終"
+"了\n"
+"    ステータスを返���。ID �与�られ��場���在アクティブ�全���プ\n"
+"    ロセスを待� 0 を返���。ID �ジョブ指定�場�ジョブ�パイプライン�\n"
+"    �る全��プロセスを待���。\n"
+"    \n"
+"    終了ステータス:\n"
+"    最後� ID �終了ステータスを返���。ID�無効��る��無効�オプ\n"
+"    ション�与�られ�場���失敗を返���。"
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"プロセス�実行完了を待��終了ステータスを返���。\n"
+"    \n"
+"    PID�指定�れ��プロレスを待����終了ステータスを返���。PID �与�"
+"られ\n"
+"    ��場���在アクティブ�全���プロセスを待��0 を返���。PID �\n"
+"    プロセスID���れ�����ん。\n"
+"    \n"
+"    終了ステータス:\n"
+"    最後� PID �終了ステータスを返���。PID�無効��無効�オプション�与"
+"�られ�\n"
+"    場��失敗���。"
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"リスト���素�対��コマンドを実行���。\n"
+"    \n"
+"    `for' ループ��リスト���素�対��一連�コマンドを実行���。\n"
+"    `in WORDS ...;' �存在���場��`in \"$@\"' ��る�見��れ��。\n"
+"    WORDS ��素� NAME �値���代入�れ COMMANDS �実行�れ��。\n"
+"    \n"
+"    終了ステータス:\n"
+"    最後�実行��コマンド�ステータスを返���。"
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"算術 for ループ\n"
+"    \n"
+"    以下�等価��。\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1�EXP2��よ� EXP3 �数���。��れ��数�を�略��場��\n"
+"    値� 1 ��る���評価�れ��。\n"
+"    \n"
+"    終了ステータス:\n"
+"    最後�実行��コマンド�ステータスを返���。"
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"一覧�ら項目を�択��COMMANDS を実行���。\n"
+"    \n"
+"    WORDS �展開�れ�項目�一覧�生��れ��。展開�れ�項目\n"
+"    �組�標準エラー出力�表示�れ��。�項目����数値�付�\n"
+"    られ��。`in WORDS' �存在���場��`in \"$@\"' �仮定�れ��。\n"
+"    次� PS3 プロンプト�表示�れ�標準入力�ら 1 行読�込�れ��。\n"
+"    行�表示��項目�一��関連��られ�数値�構��れ���場��\n"
+"    NAME �項目�設定�れ��。空行�場��プロンプト��度表示�れ\n"
+"    ��。ファイル終了(EOF) �読�込�れ�場��コマンド�終了���。\n"
+"    �れ以外�場�� NAME � null �設定�れ��。読�込ん�行�変数\n"
+"    REPLY ��存�れ��。行�読�込�れる��� break コマンド�実\n"
+"    行�れる�� COMMANDS �繰り返�実行�れ��。\n"
+"    \n"
+"    終了ステータス:\n"
+"    最後�実行��コマンド�ステータスを返���。"
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"パイプラインを実行�る時�消費�れ�時間を報告���。\n"
+"    \n"
+"    PIPELINE を実行��終了時� PIPELINE を実行�る���費や�れ�実\n"
+"    時間�ユーザー CPU 時間��よ�システム CPU 時間��約を表示���。\n"
+"    \n"
+"    オプション:\n"
+"      -p\t移�性��る Posix 形��時間��約を表示���\n"
+"    \n"
+"    変数 TIMEFORMAT �値�出力�形����使用�れ��。\n"
+"    \n"
+"    終了ステータス:\n"
+"    PIPELINE �戻り値�終了ステータス��り��。"
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"パターン一致��果�基���コマンドを実行���。\n"
+"    \n"
+"    WORD � PATTERN �一致�る�����基����択的� COMMANDS を実行��"
+"�。\n"
+"    複数�パターンを区切る��� `|' �使用�れ��。\n"
+"    \n"
+"    終了ステータス:\n"
+"    最後�実行��コマンド�ステータスを返���。"
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"�件�従��コマンドを実行���。\n"
+"    \n"
+"    `if COMMANDS' を実行���。��終了ステータス� 0 �場��`then "
+"COMMANDS'\n"
+"    を実行���。�����場���� `elif COMMANDS' を順番�実行����\n"
+"    終了ステータス� 0 �場���関連�� `then COMMANDS' を実行��if 文�\n"
+"    完了���。�れ以外�場�� `else COMMANDS' �存在�る場���実行�れ\n"
+"    ��。文全体�終了ステータス��最後�実行��コマンド�終了ステータス"
+"��\n"
+"    ����テスト���件� true ��るも��無�場�� 0 ��。\n"
+"    \n"
+"    終了ステータス:\n"
+"    最後�実行��コマンド�終了ステータスを返���。"
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"テスト��功�る�りコマンドを実行���。\n"
+"    \n"
+"    `while' COMMANDS ��る最後�コマンド�終了ステータス� 0 ��る間 \n"
+"     COMMANDS を展開��実行���。\n"
+"    \n"
+"    終了ステータス:\n"
+"    最後�実行��コマンド�ステータスを返���。"
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"テスト�失敗�る�りコマンドを実行���。\n"
+"    \n"
+"    `until' COMMANDS ��る最後�コマンド�終了ステータス� 0 ���間\n"
+"     COMMANDS を展開��実行���。\n"
+"    \n"
+"    終了ステータス:\n"
+"    最後�実行��コマンド�ステータスを返���。"
+
+#: builtins.c:1671
+#, fuzzy
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"NAME ��������期プロセスを作����。\n"
+"    \n"
+"    COMMAND を��期�実行���。コマンド�標準出力�よ�標準入力�実行\n"
+"    ���るシェル�インデックス型�列変数 NAME ��素添字 0�1 �設定\n"
+"    �れるファイル記述���パイプ���接続�れ��。\n"
+"    デフォルト� NAME � \"COPROC\" ��。\n"
+"    \n"
+"    終了ステータス:\n"
+"    COMMAND �終了ステータスを返���。"
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"シェル関数を定義���。\n"
+"    \n"
+"    NAME ������シェル関数を作����。��コマンド���起動�れ�時"
+"�\n"
+"    NAME � COMMANDs をシェル�コンテキスト内�呼�出���。NAME を起動�"
+"�\n"
+"    時�引数�関数� $1...$n ����置パラメーター��関数�� $FUNCNAME\n"
+"    変数���渡�れ��。\n"
+"    \n"
+"    終了ステータス:\n"
+"    NAME �読��り専用����り�功を返���。"
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"複数�コマンドを一��グループ化���。\n"
+"    \n"
+"    複数�コマンドをグループ���1セット���実行���。�れ�コマンド\n"
+"    �セット全体をリダイレクト�る一��方法��。\n"
+"    \n"
+"    終了ステータス:\n"
+"    最後�実行��コマンド�ステータスを返���。"
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"ジョブをフォアグラウンド��開���。\n"
+"    \n"
+"    `fg' コマンド�引数���与�る JOB_SPEC �等価��。�止���\n"
+"    �ックグラウンド�ジョブを�開���。JOB_SPEC �ジョブ����\n"
+"    ジョブ番��指定���。JOB_SPEC �後� `&' を続�る��`bg' �\n"
+"    引数���与�られ�よ��ジョブを�ックグラウンド����。\n"
+"    \n"
+"    終了ステータス:\n"
+"    �開�れ�ジョブ�終了ステータスを返���。"
+
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"算術�を評価���。\n"
+"    \n"
+"    算術���定�基��� EXPRESSION を評価���。\"let EXPRESSION\"\n"
+"    �等価��。\n"
+"    \n"
+"    終了ステータス:\n"
+"    EXPRESSION �評価値� 0 �場�� 1��れ以外� 0 を返���。"
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"�件��コマンドを実行���。\n"
+"    \n"
+"    �件� EXPRESSION �評価�果�基��� 0 ��� 1 を返���。\n"
+"    �件�� test 組�込�関数���優先順��組����れ��。���\n"
+"    次�演算��も組����れ��。\n"
+"    \n"
+"      ( EXPRESSION )\tEXPRESSION �値を返���\n"
+"      ! EXPRESSION\t\tEXPRESSION � true �時 false を返���。�れ\n"
+"                  \t\t以外� false を返���\n"
+"      EXPR1 && EXPR2\tEXPR1 �よ� EXPR2 �両方� true �時 true を返��"
+"�。\n"
+"      \t�れ以外� false を返���。\n"
+"      EXPR1 || EXPR2\tEXPR1 �よ� EXPR2 ���れ�� true �時 true を返�\n"
+"      \t��。�れ以外� false を返���。\n"
+"    \n"
+"    `==' �よ� `!=' 演算��使用�れ�場��演算�����文字列をパターン"
+"�\n"
+"    ��左��文字列�対�るパターン一致処��行�れ��。\n"
+"    `=~' 演算��使用�れ�場��演算�����文字列�正�表����扱�れ"
+"�\n"
+"    �。\n"
+"    \n"
+"    && �よ� || 演算�� EXPR1 ���値を決定�る���分�場�� EXPR2 を\n"
+"    評価���ん。\n"
+"    \n"
+"    終了ステータス:\n"
+"    EXPRESSION �値�基��� 0 ��� 1 を返���。"
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"通常�変数����使用法。\n"
+"    \n"
+"    BASH_VERSION\tBash��ージョン情報。\n"
+"    CDPATH\t`cd`�引数���与�られ�ディレクトリを検索�る際�\n"
+"    \t\t使用�れるコロン (:) �区切られ�ディレクトリ�一覧。\n"
+"    GLOBIGNORE\tパス�を展開�る時�無視�れるコロン (:) �区切られ�\n"
+"    \t\tファイル�パターン�一覧。\n"
+"    HISTFILE\tコマンドヒストリ��存�れるファイル�。\n"
+"    HISTFILESIZE\tヒストリファイル��存�る�����る最大行数。\n"
+"    HISTSIZE\t実行中�シェル�アクセス��る最大ヒストリ行数。\n"
+"    HOME\tログインディレクトリ�完全パス�。\n"
+"    HOSTNAME\t�在�ホスト�。\n"
+"    HOSTTYPE\t���ージョン� Bash を実行���る CPU �種類。\n"
+"    IGNOREEOF\tシェル�ファイル終了 (EOF) 文字を�一�入力�����\n"
+"    \t\t���時�動作を制御���。設定�れ��る場��空白行\n"
+"    \t\t� EOF 文字を��数連続�������時�シェルを終了\n"
+"    \t\t��� (デフォルト 10)。設定�解除�れ�場��EOF �\n"
+"    \t\t入力�終了�る��を�味���。\n"
+"    MACHTYPE\tBash �実行�れ��る�在�システムを表�文字列。\n"
+"    MAILCHECK\tBash �メールを確��る頻度 (秒��)。\n"
+"    MAILPATH\tBash �新�メールを確��るコロン (:) �区切られ�\n"
+"    \t\tファイル��一覧。\n"
+"    OSTYPE\t���ージョン� Bash を実行���る OS ��ージョン。\n"
+"    PATH\tコマンドを検索�る際�使用�れるコロン (:) �区切ら\n"
+"    \t\tれ�ディレクトリ�一覧。\n"
+"    PROMPT_COMMAND\tプライマリプロンプト�表示�れる��毎回実行\n"
+"    \t\t�れるコマンド。\n"
+"    PS1\t\tプライマリプロンプト文字列。\n"
+"    PS2\t\tセカンダリプロンプト文字列。\n"
+"    PWD\t\t�在�ディレクトリ�完全パス�。\n"
+"    SHELLOPTS\tコロン (:) �区切られ�有効�シェルオプション一覧。\n"
+"    TERM\t�在�端末種類�。\n"
+"    TIMEFORMAT\t`time' 予約語�よる時間統計情報�表示書�。\n"
+"    auto_resume\tnull �無�場����行��れ�コマンド�����在�止\n"
+"    \t\t�れ��るジョブ�ら検索�れ��。�れ�見����場��\n"
+"    \t\tジョブ�フォアグランド��り��。値� `exact' �場��\n"
+"    \t\tコマンド��止���るジョブ�一覧�厳密�一致�����\n"
+"    \t\tれ��り��ん。値� `substring' �場��コマンド�ジョ\n"
+"    \t\tブ�部分文字列�一致���れ��り��ん。��他�値�\n"
+"    \t\t場��コマンド��止���るジョブ�先頭部分�一致��\n"
+"    \t\t�れ��り��ん。\n"
+"    histchars\tヒストリ展開�クイック置�を制御�る文字。最��文字�\n"
+"    \t\tヒストリ展開�文字�通常� `!' ��。二番目�クイック\n"
+"    \t\t置��通常� `^' ��。三番目�ヒストリ�コメント�\n"
+"    \t\t通常� `#' ��。\n"
+"    HISTIGNORE\tヒストリ一覧��存�れるコマンドを決�る時�使用�れる\n"
+"    \t\tコロン (:) �区切られ�パターン�一覧。\n"
+
+#: builtins.c:1821
+#, fuzzy
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"ディレクトリをディレクトリスタック�加���。\n"
+"    \n"
+"    ディレクトリをディレクトリスタック�先頭�加�る����ディレ\n"
+"    クトリを回転��カレントディレクトリ�スタック�先頭��るよ�\n"
+"    ����。引数���場��先頭�二��ディレクトリを入れ替��\n"
+"    �。\n"
+"    \n"
+"    オプション:\n"
+"      -n\tスタック�加��時�通常�ディレクトリ変更を抑止�\n"
+"    \t��。よ��スタック���作�れ��。\n"
+"    \n"
+"    引数:\n"
+"      +N\tN 番目�ディレクトリ�先頭��るよ�スタックを回転\n"
+"    \t��� (`dirs' �表示�れる一覧�左�ら数���。開始番�\n"
+"    \t� 0 ��)。\n"
+"    \n"
+"      -N\tN 番目�ディレクトリ�先頭��るよ�スタックを回転\n"
+"    \t��� (`dirs' �表示�れる一覧���ら数���。開始番�\n"
+"    \t� 0 ��)。\n"
+"    \n"
+"      dir\tDIR をディレクトリスタック�先頭�加��カレント\n"
+"    \tディレクトリ����。\n"
+"    \n"
+"    `dirs' 組�込�関数�ディレクトリスタックを表示���。\n"
+"    \n"
+"    終了ステータス:\n"
+"    無効�引数�与�られる�ディレクトリ変更�失敗����り�功を\n"
+"    返���。"
+
+#: builtins.c:1855
+#, fuzzy
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"ディレクトリスタック�らディレクトリを削除���。\n"
+"    \n"
+"    ディレクトリスタック�ら�素を削除���。引数���場��ディレクトリ\n"
+"    スタック�先頭�ら削除��新��スタック先頭�ディレクトリ�移動��"
+"�。\n"
+"    \n"
+"    オプション:\n"
+"      -n\tスタック�らディレクトリを削除��時�通常�ディレクトリ変\n"
+"    \t更を抑止���。よ��スタック���作�れ��。\n"
+"    \n"
+"    引数:\n"
+"      +N\t`dirs' �表示�れる一覧�左�ら数�� N 番目��素を削除�\n"
+"    \t��。開始番�� 0 ��。例���`popd +0' �先頭�ディレクトリを\n"
+"    \t削除���。`popd +1' �二番目��。\n"
+"    \n"
+"      -N\t`dirs' �表示�れる一覧���ら数�� N 番目��素を削除�\n"
+"    \t��。開始番�� 0 ��。例���`popd -0' �最後�ディレクトリを\n"
+"    \t削除���。`popd -1' �最後�ら二番目��。\n"
+"    \n"
+"    `dirs' 組�込�関数�ディレクトリスタックを表示���。\n"
+"    \n"
+"    終了ステータス:\n"
+"    無効�引数�与�られる�ディレクトリ変更�失敗����り�功を\n"
+"    返���。"
+
+#: builtins.c:1885
+#, fuzzy
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"ディレクトリスタックを表示���。\n"
+"    \n"
+"    �在記憶�れ��るディレクトリ一覧を表示���。ディレクトリ� `pushd'\n"
+"    コマンドを使用��一覧�追加�れ�`popd' コマンドを通��一覧�ら�り\n"
+"    戻�れ��。\n"
+"    \n"
+"    オプション:\n"
+"      -c\t全���素を削除��ディレクトリスタックを空����\n"
+"      -l\tホームディレクトリ�ら�相対パスを ~ を先頭���形��\n"
+"    \t表示���ん\n"
+"      -p\t一行�一��ディレクトリスタック�素を表示���\n"
+"      -v\t一行�一��ディレクトリスタック�素を�置�関�る番�\n"
+"    \tを���表示���\n"
+"    \n"
+"    引数:\n"
+"      +N\tdirs を引数無��実行��時�一覧�左�ら数�� N 番目�\n"
+"    \t�素��を表示���。開始番�� 0 ��。\n"
+"    \n"
+"      -N\tdirs を引数無��実行��時�一覧���ら数�� N 番目�\n"
+"    \t�素��を表示���。開始番�� 0 ��。\n"
+"    \n"
+"    終了ステータス:\n"
+"    無効�オプション�与�られる�エラー�発生����り�功を返���。"
+
+#: builtins.c:1916
+#, fuzzy
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"シェルオプションを設定��よ�設定解除���。\n"
+"    \n"
+"    �シェルオプション OPTNAME �設定を変更���。引数���場��シェル\n"
+"    オプション全�を��れ�れ設定�れ��る���を���表示���。\n"
+"    \n"
+"    オプション:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\t�れ�れ�シェルオプションを�状態を���表示���\n"
+"      -q\t出力を抑止���\n"
+"      -s\tOPTNAME を�れ�れ有効 (設定) ����\n"
+"      -u\tOPTNAME を�れ�れ無効 (�設定) ����\n"
+"    \n"
+"    終了ステータス:\n"
+"    OPTNAME �有効�場���功を返���。無効�オプション�与�られ�場�\n"
+"    ��� OPTNAME �無効�場��失敗を返���。"
+
+#: builtins.c:1937
+#, fuzzy
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"ARGUMENTS を FORMAT �書�整形��表示���。\n"
+"    \n"
+"    オプション:\n"
+"      -v var\t標準出力�表示�る������出力をシェル変数 VAR �代入��"
+"�\n"
+"    \n"
+"    FORMAT �次�3種類�オブジェクトを�む文字列��。一�目�普通�文字��"
+"�\n"
+"    標準出力�コピー�れ��。二�目�エスケープ文字�変��れ�後標準出力"
+"�\n"
+"    コピー�れ��。三�目�書�指定文字���文字�後�続�引数を表示��"
+"�。\n"
+"    \n"
+"    printf(1) �記述�れる標準�書�指定�加���printf �次�文字を解釈��"
+"�。\n"
+"    \n"
+"      %b\t対応�る引数��ックスラッシュエスケープ文字を展開�る\n"
+"      %q\tシェル入力���引数をクオート�る\n"
+"      %(fmt)T   FMT を strftime(3) 用�書�文字列���日付�時間�文字列を出"
+"力�る\n"
+"    \n"
+"    FORMAT ����� ARGUMENTS を使�切る必���り��。FORMAT�必���"
+"ã‚‹\n"
+"    ARGUMENTS より少��場��残り�書�指定�値� 0 ��� null 文字列��"
+"切\n"
+"    �与�られ��る��よ��動作���。\n"
+"\n"
+"    終了ステータス:\n"
+"    無効�引数�与�られる��書�込��代入エラー�発生����り�功を返�"
+"��。"
+
+#: builtins.c:1971
+#, fuzzy
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"引数� Readline �よ����よ��補完�れる�を指定���。\n"
+"    \n"
+"    � NAME �対����よ��引数�補完�れる�を指定���。オプション�与"
+"�\n"
+"    られ��場��既存�補完指定�入力����利用�能�形��表示�れ�"
+"�。\n"
+"    \n"
+"    \n"
+"    オプション:\n"
+"      -p\t既存�補完指定を�利用�能�形��表示�る\n"
+"      -r\t補完指定 NAME を削除���。NAME �与�られ��場��全��\n"
+"    \t補完指定を削除�る\n"
+"      -D\t補完指定�定義�れ����時�コマンド�対�るデフォルト�\n"
+"    \t補完�動作を�用�る\n"
+"      -E\t\"空\" コマンド�対�る補完 (空行�対�る補完�試�) �動作\n"
+"    \tを�用�る\n"
+"    \n"
+"    補完�試�られ�時�上記オプション���大文字�オプション�動作�\n"
+"    行�れ��。-D オプション� -E オプションより優先�れ��。\n"
+"    \n"
+"    終了ステータス:\n"
+"    無効�オプション�与�られる�エラー�発生����り�功を返���。"
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"オプション�基���補完候補を表示���。\n"
+"    \n"
+"    シェル関数�中�補完候補を生��る���使用�るよ���図�れ���"
+"�。\n"
+"    オプション引数 WORD �与�られ�場��WORD �対��一致��候補�生�\n"
+"    �れ��。\n"
+"    \n"
+"    終了ステータス:\n"
+"    無効�オプション�与�られる�エラー�発生����り�功を返���。"
+
+#: builtins.c:2016
+#, fuzzy
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"補完オプションを編集���表示���。\n"
+"    \n"
+"    � NAME �対��補完オプションを変更���。NAME �与�られ��場��\n"
+"    補完�直��実行�れ��。も� OPTION �与�られ��場��� NAME \n"
+"    ����在�補完�対�る補完オプションを表示���。\n"
+"    \n"
+"    オプション:\n"
+"    \t-o option\t� NAME �対��補完オプション OPTION を設定�る\n"
+"    \t-D\t\t\"デフォルト\" コマンド補完オプションを変更�る\n"
+"    \t-E\t\t\"空\" コマンド補完オプションを変更�る\n"
+"    \n"
+"    `-o' �代�り� `+o' を使用�る�指定��オプションをオフ����。\n"
+"    \n"
+"    引数:\n"
+"    \n"
+"    � NAME � `complete' 組�込�関数を使��事��定義�れ�補完指定をコ"
+"マ\n"
+"    ンドを指�示���れ��り��ん。NAME �与�られ��場��compopt �\n"
+"    補完を�れ�ら生��る関数�ら呼�出�れ��れ�����ん。���\n"
+"    補完を�れ�ら生��る関数�対�るオプション�変更�れ��。\n"
+"    \n"
+"    終了ステータス:\n"
+"    無効�オプション�与�られる�� NAME �補完指定���定義�れ����場"
+"�\n"
+"    を除���功を返���。"
+
+#: builtins.c:2047
+#, fuzzy
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"標準入力�ら行を読�込�インデックス型�列�代入���。\n"
+"    \n"
+"    標準入力�-u オプション�与�られ�場��ファイル記述� FD �ら行を読�込"
+"��\n"
+"    インデックス型�列変数 ARRAY �代入���。変数 ARRAY �デフォルト� "
+"MAPFILE\n"
+"    ��。\n"
+"    \n"
+"    オプション:\n"
+"      -n count\t最大 COUNT 行をコピー�る。COUNT � 0 �場��全��行をコ"
+"ピー�る\n"
+"      -O origin\t�列�開始番�を ORIGIN ��る。デフォルト� 0\n"
+"      -s count \t最�� COUNT 行�読�込�を破棄�る\n"
+"      -t\t\t�行を読�込ん�時�最後�改行を削除�る\n"
+"      -u fd\t\t標準入力����ファイル記述� FD �ら行を読�込む\n"
+"      -C callback\tQUANTUM 行を読�込む毎� CALLBACK を評価�る\n"
+"      -c quantum\tCALLBACK を何行読�込む毎�実行�る�を指定�る\n"
+"    \n"
+"    引数:\n"
+"      ARRAY\t\tデータを�存�る���使用�る�列変数�\n"
+"    \n"
+"    も� -c �指定�れ�� -C �与�られ�場��デフォルト� quantum � 5000 "
+"��。\n"
+"    CALLBACK �評価�れ�時�代入�れる�列�次�素�インデックス���素�代"
+"入�\n"
+"    れる行�追加�引数���渡�れ��。\n"
+"    \n"
+"    明示的�開始番��与�られ��場��mapfile �代入�� ARRAY を空���"
+"�。\n"
+"    \n"
+"    終了ステータス:\n"
+"    無効�オプション�与�られる��列�読��り専用����インデックス型�"
+"列�無�\n"
+"    場�を除��功を返���。"
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"ファイル�ら行を読�込��列変数�代入���。\n"
+"    \n"
+"    `mapfile'�別���。"
+
+#, fuzzy
+#~ msgid "Copyright (C) 2019 Free Software Foundation, Inc."
+#~ msgstr "Copyright (C) 2016 Free Software Foundation, Inc."
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "�在�サブルー�ン呼�出��コンテキストを返���。\n"
+#~ "    \n"
+#~ "    EXPR �無�場��次を返��� "
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process: プロセス %5ld (%s) � the_pipeline ��り��"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "�明�シグナル番�"
+
+#~ msgid ":"
+#~ msgstr ":"
+
+#~ msgid "true"
+#~ msgstr "true"
+
+#~ msgid "false"
+#~ msgstr "false"
+
+#~ msgid "times"
+#~ msgstr "times"
diff --git a/po/ko.gmo b/po/ko.gmo
new file mode 100644
index 0000000..e8dbf49
--- /dev/null
+++ b/po/ko.gmo
diff --git a/po/ko.po b/po/ko.po
new file mode 100644
index 0000000..0131769
--- /dev/null
+++ b/po/ko.po
@@ -0,0 +1,4447 @@
+# Korean Translation for bash
+# Copyright (C) 2019 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+# SooHyun Kim <soohyunkim@kw.ac.kr>, 2019.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: bash-5.0\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2019-11-23 16:28+0900\n"
+"Last-Translator: SooHyun Kim <soohyunkim@kw.ac.kr>\n"
+"Language-Team: Korean <translation-team-ko@googlegroups.com>\n"
+"Language: ko\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "잘못� 배열 첨�"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr "%s: �름 참조 �성� 지우는 중"
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: ��스 배열� 연관 배열로 변환할 수 없�"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: 유효하지 않� 연관 배열 키"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: 숫�가 아닌 ��스� 할당할 수 없�"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr "%s: %s: 연관 배열� 할당하기 위해서 반드시 첨�를 사용해야 함"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: �성할 수 없�: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr "bash_execute_unix_command: 명령어를 위한 keymap� 찾� 수 없�"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: 공백� 아닌 첫 문�가 '\"' 가 아님"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "%2$s� 닫는 '%1$c' 없�"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: 콜론(:) 구분� 없�"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "'%s': unbind 할 수 없�"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr "괄호 확장: '%s'를 위해 메모리를 할당할 수 없�"
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr "괄호 확장: %u개 요소를 위한 메모리 할당 실패"
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr "괄호 확장: '%s'를 위한 메모리 할당 실패"
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "'%s': 유효하지 않� 별명"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "줄 편집 활성화�어있지 않�"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "'%s': 유효하지 않� keymap �름"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: %s를 �� 수 없�"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "`%s': 알 수 없는 함수 �름"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s 는 어� 키�� bind �어있지 않�.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s 는 다�� 통해 호출� 수 있� "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "'%s': unbind 할 수 없�"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "반복 횟수"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "'for', 'while' �는 'until' 반복문�서만 �미가 있�"
+
+#: builtins/caller.def:136
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "HOME 설정�지 않�"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "��가 너무 많�"
+
+#: builtins/cd.def:342
+msgid "null directory"
+msgstr "null 디렉토리"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "OLDPWD 설정�지 않�"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "%d 줄: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "경고: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: 사용법: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: 옵션� ��가 필요함"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: 숫�로 � ��가 필요함"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: 찾� 수 없�"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: 유효하지 않� 옵션"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: 유효하지 않� 옵션 �름"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "`%s': 유효한 �별�가 아님"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "유효하지 않� 8진수"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "유효하지 않� 16진수"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "유효하지 않� 수"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: 유효하지 않� 신호 정�"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "'%s': pid가 아니거나 유효한 job spec� 아님"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: �기 전용 변수임"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s가 범위를 벗어남"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "��"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s가 범위를 벗어남"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: 그러한 job� 없�"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: job control� 없�"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "job control� 없�"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: 제한�"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "제한�"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: 쉘 내장� 아님"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "쓰기 오류: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "터미� �성 설정 오류: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "터미� �성 �기 오류: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: 현재 디렉토리를 받아오는 � 오류 발�: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: 모호한 job spec"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr "� 버전�는 �움�� 없�"
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: unset할 수 없�: %s가 �기 전용임"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: unset할 수 없�"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: 유효하지 않� 액션 �름"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: 완료 사양 없�"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "경고: -F 옵션� 예�대로 작�하지 않� 수 있�"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "경고: -C 옵션� 예�대로 작�하지 않� 수 있�"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "현재 완료 함수가 실행중� 아님"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "함수�서만 사용� 수 있�"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr "%s: 참조 변수로 배열� 올 수 없�"
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr "%s: �름 참조 변수� �가 참조는 허용�지 않�"
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s: 순환 �름 참조"
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "'%s': 유효하지 않� �름 참조 변수 �름"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "함수를 만들기 위해 '-f'를 사용할 수 없�"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: �기 전용 함수임"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr "%s: 따옴표를 �용한 복합 배열 할당� 향후 제거� 예정임"
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: � 방법으로 배열 변수를 파괴할 수 없�"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: 참조 배열� ��스 배열로 변환할 수 없�"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "�� 로딩� �용할 수 없�"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "공유 오브�트 %s를 열 수 없�: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "공유 오브�트 %2$s�서 %1$s를 찾� 수 없�: %3$s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: ��으로 로드�지 않�"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr "%s� 대한 함수 로드가 실패 반환 (%d): 로드�지 않�"
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: ��으로 로드�지 않�"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: 삭제할 수 없�: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: 디렉터리임"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: �반�� 파�� 아님"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: 파�� 너무 �"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: 바�너리 파�� 실행할 수 없�"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: 실행할 수 없�: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "로그아웃\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "로그� 쉘� 아님: 'exit'를 사용하세요"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "정지� job� 있습니다.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "실행중� job� 있습니다.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "명령어를 찾� 수 없�"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "히스토리 사양"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: 임시 파�� 열 수 없�: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "현재"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "job %d가 job control 없� 시작함"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: 잘못� 옵션 -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: 옵션� ��를 필요로 함 -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "해싱 비활성화�"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: 해시 테�블� 비어있�\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "hits\tcommand\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "다� 키워드� �치하는 쉘 명령어 '"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"'%s'� 해당하는 �움� 주제가 없습니다. 'man -k %s' �는 'info %s'를 사용해 "
+"보세요."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: 열 수 없�: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"� 쉘 명령어들� 내부�으로 정��어 있습니다.  목�� 보려면 `help' 를 입력"
+"하세요.\n"
+"`help name' � 입력하면 함수 `name' � 대한 정보를 � 확�할 수 있습니다.\n"
+"쉘� 대한 �반�� 정보를 � 확�하려면 `info bash' 를 사용하세요.\n"
+"� 목�� 없는 명령어� 대해 � 알아보려면 `man -k' �는 `info' 를 사용하세"
+"ìš”.\n"
+"\n"
+"명령어 �름 다�� 별 (*) � 해당 명령어가 비활성화 �었�� �미합니다.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "-anrw를 한 개 �� 사용할 수 없�"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "히스토리 위치"
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: 유효하지 않� 타임스탬프"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: 히스토리 확장 실패"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: inlib 실패"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "'-x'와 다른 옵션들� 같� 사용할 수 없�"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: ��는 반드시 프로세스 �는 job ID�어야 함"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "알 수 없는 오류"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "표현�� 예�함"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: ��스 배열� 아님"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: 유효하지 않� 파� 디스�립터 명세"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: 유효하지 않� 파� 디스�립터: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: 유효하지 않� 줄 수"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: 유효하지 않� 배열� 시작"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: 유효하지 않� 콜백 양�"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "빈 배열 변수 �름"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "배열 변수 지�� 필요함"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "'%s': 서� 문� 없�"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "'%c': 유효하지 않� 시간 �맷 사양"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "'%c': 유효하지 않� 서� 문�"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "경고: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "형� 파싱 문제: %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "\\x� 16진수 숫� 없�"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "\\%c� 해당하는 유니코드 문� 없�"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "다른 디렉토리 없�"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s: 유효하지 않� ��"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<현재 디렉토리 없�>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "디렉토리 스�� 비어있�"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "디렉토리 스� ��스"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"현재 기억� 디렉토리� 목�� 보여�니다.  디렉토리들�\n"
+"    `pushd' 명령� 통해 목�� 경로를 저장할 수 있고; 'popd' \n"
+"    명령� 통해 거슬러 올�갈 수 있습니다.\n"
+"    \n"
+"    옵션:\n"
+"      -c\t�소를 전부 삭제함으로� 디렉토리 스�� 초기화합니다\n"
+"      -l\t홈 디렉토리까지 ~로 축약� �대경로를 표시하지 않습니다\n"
+"      -p\t한 줄� 하나씩 디렉토리 스�� 표시합니다\n"
+"      -v\t한 줄� 하나씩 스�� 위치와 함께 디렉토리 스�� 표시합니다\n"
+"    \n"
+"    ��:\n"
+"      +N\t�� 없� 실행� 때 보여지는 목�� 왼쪽부터 N번째 항목� 보여�니"
+"다.\n"
+"    \t세는 수는 0부터 시작합니다.\n"
+"    \n"
+"      -N\t�� 없� 실행� 때 보여지는 목�� 오른쪽부터 N번째 항목� 보여�"
+"니다.\n"
+"\t세는 수는 0부터 시작합니다."
+
+#: builtins/pushd.def:723
+#, fuzzy
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"디렉토리 스�� 최�위� 디렉토리를 추가하거나 스�� 회전\n"
+"    하거나, 현재 작업중� 디렉토리�서 스�� 새 최�위를 \n"
+"    만듭니다.  ��가 없다면 �위 � 디렉토리를 �환합니다.\n"
+"    \n"
+"    옵션:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    `dirs' 내장� 디렉토리 스�� 보여�니다."
+
+#: builtins/pushd.def:748
+#, fuzzy
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"디렉토리 스��서 항목� 제거합니다.  주어진 ��가 없� 경우\n"
+"    최�위 디렉토리를 스��서 제거하고 새 최�위 디렉토리로 변경합니다.\n"
+"    \n"
+"    옵션:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: 유효하지 않� 타임아웃 정�"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "�기 오류: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr "함수 �는 소스� 스�립트�서만 'return' 할 수 있�"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "함수와 변수를 �시� unset할 수 없�"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: 배열 변수가 아님"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: 함수가 아님"
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr "%s: export할 수 없�"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "시프트 횟수"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "쉘 옵션� �시� set 하고 unset 할 수 없�"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: 유효하지 않� 쉘 옵션 �름"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "��로 파� �름� 반드시 필요함"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: 파�� 찾� 수 없�"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "�시 정지할 수 없�"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "로그� 쉘� �시 정지할 수 없�"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s는 '%s'� 별칭임\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s 는 쉘 키워드임\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s 는 함수임\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s 는 특수한 쉘 내장임\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s 는 쉘 내장임\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s 는 %s 임\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s 는 해시� (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: 유효하지 않� 제한 ��"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "'%c': 잘못� 명령어"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: 제한� �� 수 없�: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "제한"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: 제한� 변경할 수 없�: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "8진수"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "'%c': 유효하지 않� 심볼릭 모드 연산�"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "'%c': 유효하지 않� 심볼릭 모드 문�"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " 줄 "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "마지막 명령: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "취소중..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr "ì •ë³´: "
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "알 수 없는 명령어 오류"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "잘못� 명령어 타입"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "잘못� 커넥터"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "잘못� �프"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: 해제� 변수"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\a입력 대기중 시간 초과: ��으로 로그아웃\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "표준 입력� /dev/null�서 리다�렉트 할 수 없�: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "TIMEFORMAT: `%c': 유효하지 않� 서� 문�"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr "execute_coproc: coproc [%d:%s] 가 여전히 존재"
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "파�프 오류"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr "eval: 최대 eval 중첩 레벨 초과 (%d)"
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr "%s: 최대 소스 중첩 레벨 초과 (%d)"
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr "%s: 최대 함수 중첩 레벨 초과 (%d)"
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: 제한�: 명령 �름� '/'를 지정할 수 없�"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: 명령어를 찾� 수 없�"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: 잘못� �터프리터"
+
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: �진 파�� 실행할 수 없�: %s"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "'%s': 특수한 내장 명령임"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "fd %d를 fd %d로 복제할 수 없�"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "표현� 재귀 레벨 초과�"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "재귀 스� 언�플로우"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "표현� 문법 오류"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "변수가 아닌 것� 할당� 시�함"
+
+#: expr.c:530
+msgid "syntax error in variable assignment"
+msgstr "변수 할당 문법 오류"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "0으로 나눔"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "버그: 잘못� 표현� 토�"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "조건문� ':' 예�함"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "지수가 0보다 작�"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "전위 �가 �는 후위 �소 후� �별�를 예�함"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "')' 빠�"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "문법 오류: 피연산� 예�함"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "문법 오류: 유효하지 않� 산술 연산�"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (오류 토�� \"%s\" 임)"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "유효하지 않� 진법"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: 유효하지 않� 줄 수"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "해당 진법�서 표현할 수 없는 값"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: 표현� 오류\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: 부모 디렉터리� 접근할 수 없�"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "fd %d� 대해 nodelay 모드를 재설정 할 수 없�"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr "fd %d�서 bash 입력� 위한 새 파� 디스�립터를 할당할 수 없�"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input: 새로운 fd %d를 위한 버�가 �미 존재함"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: pgrp pipe"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "��� pid %d가 실행중� job %d� 나타남"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "프로세스 그룹 %2$ld� 정지� 작업 %1$d 를 삭제중"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process: pid %5ld (%s) 가 현재� 살아있다고 표시�"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: 그런 pid가 없�"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "신호 %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "완료"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "멈춤"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "멈춤(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "실행중"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "완료(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "나� %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "알 수 없는 �태"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(코어 �프�) "
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (wd: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "child setpgid (%ld �서 %ld 로)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: pid %ld는 � 쉘� ��� 아님"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: 프로세스 %ld� 대한 기� 없�"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: job %d � 정지�"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: 그러한 job� 없�"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: 작업� 종료�"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: job %d는 �미 백그�운드� 있�"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr "waitchld: 정��지 않� 블�� 피하기 위해 WNOHANG를 켜는 중"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: 줄 %d: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (코어 �프�)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(wd now: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: getpgrp 실패"
+
+#: jobs.c:4447
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: 백그�운드� job control 없�"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: line discipline"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "터미털 프로세스 그룹 (%d)� 설정할 수 없�"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "� 쉘� job control 없�"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: assertion 실패: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d: assertion �가�\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "알 수 없�"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: block on free list clobbered"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: �미 해제� 블� ��를 가지고 호출�"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: 할당�지 않� 블� ��와 호출�"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: 언�플로우 �지; mh_nbytes가 범위를 벗어남"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: 언�플로우 �지; mh_nbytes가 범위를 벗어남"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: 시작과 �� 청� 사�즈가 다름"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: 할당�지 않� 블� ��를 가지고 호출�"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc: 언�플로우 �지; mh_nbytes가 범위를 벗어남"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc: 언�플로우 �지; mh_nbytes가 범위를 벗어남"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: 시작과 �� 청� 사�즈가 다름"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: FIND_ALLOC� 할당 테�블� 가� 찼다고 함?\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: %p가 할당� 테�블� 있�?\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: %p가 �미 해제� 테�블� 있�?\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "유효하지 않� 진법"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: 알 수 없는 호스트"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: 유효하지 않� 서비스"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: 잘못� 네트워� 경로 사양"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "네트워� 작업� 지��지 않�"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: 로케�� 바꿀 수 없� (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: 로케�� 바꿀 수 없� (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: 로케�� 바꿀 수 없� (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: 로케�� 바꿀 수 없� (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "$_� 메�� 있습니다"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "$_� 새로운 메�� 있습니다"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "%s� 있는 메�� �었습니다\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "문법 오류: 산술 표현�� 필요함"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "문법 오류: ';' 예��지 않�"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "문법 오류: `((%s))'"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: 잘못� 명령어 형� %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr "here-document가 줄 %d �서 파�� �으로 구분� (`%s'를 예�함)"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr "make_redirection: 리다�렉션 명령어 `%d' 범위 벗어남"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+"shell_getc: shell_input_line_size (%zu)가 SIZE_MAX (%lu)를 초과함: 줄 잘림"
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr "최대 here-document 카운트 초과"
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "'%c'를 찾는 �중 예�하지 못한 파�� �"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "']]'를 찾� �중 예�하지 못한 파�� �"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "조건 표현�� 문법 오류: 예�하지 못한 토� '%s'"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "조건 표현�� 문법 오류"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "예��지 않� 토� '%s', ')' 예��"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "')' 예��"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "조건 단항 연산�� 예기치 않� �� '%s'"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "조건 단항 연산�� 예기치 않� ��"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "예기치 않� 토� '%s', 조건 �항 연산� 예��"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "조건 �항 연산� 예��"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "조건 �항 연산�� 대해 예기치 않� �� '%s'"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "조건 �항 연산�� 대해 예기치 않� ��"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "조건 명령어�서 예기치 않� 토� '%c'"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "조건 명령어�서 예기치 않� 토� '%s'"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "조건 명령어�서 예기치 않� 토� %d"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "예기치 않� 토� '%s' 근처�서 문법 오류"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "'%s' 근처�서 문법 오류"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "문법 오류: 예기치 않� 파�� �"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "문법 오류"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "쉘� 나가려면 \"%s\"를 사용하세요.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "맞는 ')'를 찾� �중 예기치 않� 파�� �"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "completion: 함수 `%s' 를 찾� 수 없�"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr "programmable_completion: %s: 가능한 재시� 루프"
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: NULL COMPSPEC"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: 잘못� 커넥터 `%d'"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: 유효하지 않� 파� 디스�립터"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: NULL 파� ��터"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != fileno xtrace fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: `%c': 잘못� 서� 문�"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "파� 디스�립터 범위 벗어남"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: 모호한 리다�렉트"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: �미 있는 파�� �어쓸 수 없�"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: 제한�: 출력� 리다�렉트할 수 없�"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "here-document를 위한 임시 파�� �성할 수 없�: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: fd를 변수� 할당할 수 없�"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "/dev/(tcp|udp)/host/port 는 네트워킹 없� 지��지 않�"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "리다�렉션 오류: fd를 복제할 수 없�"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "/tmp를 찾� 수 없�, 만들어 주세요!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp는 반드시 유효한 디렉토리 �름�어야 함"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr "�호� 쉘�서는 pretty-printing 모드가 무시�"
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: 유효하지 않� 옵션"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "uid를 %d로 설정할 수 없�: effective uid %d"
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "gid를 %d로 설정할 수 없�: effective gid %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr "디버거를 시작할 수 없�; 디버깅 모드 비활성화�"
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr "%s: 는 디렉터리임"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "�름 없�!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, 버전 %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"사용법:\t%s [GNU 긴 옵션] [옵션] ...\n"
+"\t%s [GNU 긴 옵션] [옵션] 스�립트-파� ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "GNU 긴 옵션:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "쉘 옵션:\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-ilrsD �는 -c 명령 �는 -O shopt_option\t\t(invocation 전용)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s �는 -o 옵션\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+"`%s -c \"help set\"' 를 사용하면 쉘 옵션� 관해 � 많� 정보를 확�할 수 있습"
+"니다.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr ""
+"`%s -c help' 를 사용하면 쉘 내장 명령어� 관해 � 많� 정보를 확�할 수 있습"
+"니다.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "버그를 보고하려면 'bashbug' 명령� 사용하세요.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr "bash 홈페�지: <http://www.gnu.org/software/bash>\n"
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr ""
+"GNU 소프트웨어를 사용하는� �반�� �움�: <http://www.gnu.org/gethelp/>\n"
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: 유효하지 않� 작업"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Bogus 신호"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Hangup"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "�터럽트"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "나가기"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Illegal instruction"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "BPT trace/trap"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "ABORT 명령"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "EMT 명령"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "부� 소수� 예외"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Killed"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "버스 오류"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "세그멘테�션 오류"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "잘못� 시스템 콜"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "고장난 파�프"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "알람 시계"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Terminated"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "긴급한 IO �황"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "멈춤 (신호)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "계�"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "��� 죽거나 멈춤"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "멈춤 (tty 입력)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "멈춤 (tty 출력)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "I/O 준비"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "CPU 제한"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "파� 제한"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "알람 (가�)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "알람 (프로파�)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "윈�우 변경�"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "기� 잠금"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "유저 신호 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "유저 신호 2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "HFT 입력 ��터 대기중"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "전� 문제 임박"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "시스템 충� 임박"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "다른 CPU로 프로세스 �전"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "프로그래� 오류"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "HFT 모니터 모드 승��"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "HFT 모니터 모드 철회�"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "HFT 사운드 절차가 완료�"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "정보 요청"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "알 수 없는 신호 #%d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "잘못� 대체: %2$s� 닫는 '%1$s' 없�"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: 리스트를 배열 멤버� 할당할 수 없�"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "프로세스 대체를 위해 파�프를 만들 수 없�"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "프로세스 대체를 위해 ��� 만들 수 없�"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "�기를 위해 명명� 파�프 %s를 열 수 없�"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "쓰기를 위해 명명� 파�프 %s를 열 수 없�"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "명명� 파�프 %s를 fd %d로 복제할 수 없�"
+
+#: subst.c:6213
+msgid "command substitution: ignored null byte in input"
+msgstr "command substitution: 입력� null 바�트 무시�"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "명령어 대체를 위해 파�프를 만들 수 없�"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "명령어 대체를 위해 ��� 만들 수 없�"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute: 파�프를 fd 1로 복제할 수 없�"
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: �름 참조� 대해 유효하지 않� 변수 �름"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: 유효하지 않� 간접 확장"
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr "%s: 유효하지 않� 변수 �름"
+
+#: subst.c:7256
+#, c-format
+msgid "%s: parameter not set"
+msgstr "%s: 파�미터 설정�지 않�"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: 파�미터가 null �는 설정�지 않�"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: 부분 문�열 표현� < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: 잘못� 대체"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: � 방법으로 할당할 수 없�"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr "향후 버전� 쉘�서는 산술 대체로 연산� 강제�니다"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "잘못� 대체: %s� 닫는 \"`\" 없�"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "�치 없�: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "�� 예��"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: 정수 표현� 예��"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "`)' 예��"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "`)' 예��었으나 %s를 발견"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: �항 연산� 예��"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: 단항 연산� 예��"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "']' 없�"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "문법 오류: ';' 예��지 않�"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "유효하지 않� 신호 번호"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr "trap handler: 최대 trap handler 레벨 초과 (%d)"
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: trap_list[%d]� 잘못� 값: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps: 신호 핸들러는 SIG_DFL �고, %d (%s)를 �신�게 보내는 중"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: 잘못� 신호 %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "'%s'� 대해 함수 정�를 불러오는� 오류 발�"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "쉘 레벨 (%d)� 너무 높습니다, 1로 재설정합니다"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: 현재 범위�서 함수 컨�스트 없�"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: 변수는 할당� 값� � 수 없�"
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr "%s: �름 참조� 정수를 할당하고 있�"
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: 현재 범위�서 함수 컨�스트 없�"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s가 null exportstr� 가�"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "%2$s를 위한 exportstr�서 유효하지 않� 문� %1$d"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "%s를 위한 exportstr� '=' 없�"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr "pop_var_context: shell_variables� 시작� 함수� 컨�스트가 아님"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: 컨�스트� global_variables 없�"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr "pop_scope: shell_variables� 시작� 임시 환경 범위가 아님"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: 파�로� 열 수 없�"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: 추척 파� 디스�립터� 유효하지 않� 값"
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s: 호환 값� 범위를 벗어남"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Copyright (C) 2018 Free Software Foundation, Inc."
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"��선스 GPLv3+: GNU GPL version 3 or later <http://gnu.org/license/gpl."
+"html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, 버전 %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr "This is free software; you are free to change and redistribute it."
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "There is NO WARRANTY, to the extent permitted by law."
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %lu bytes를 할당할 수 없� (%lu bytes 할당�)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: %lu bytes를 할당할 수 없�"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: %lu bytes를 할당할 수 없� (%lu bytes 할당�)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: %lu bytes를 할당할 수 없�"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [name[=value] ... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] name [name ...]"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function �는 readline-command]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [shell-builtin [arg ...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [expr]"
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]] [-@]] [dir]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] command [arg ...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilnrtux] [-p] [name[=value] ...]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilnrtux] [-p] name[=value] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [옵션] name[=value] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [�� ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [�� ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f 파�명] [�름 ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [�� ...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts optstring name [arg]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a name] [command [arguments ...]] [redirection ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr "fc [-e ename] [-lnr] [first] [last] �는 fc -s [pat=rep] [command]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [job_spec]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [job_spec ...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p pathname] [-dt] [name ...]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [패턴 ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d 오프셋] [n] �는 history -anrw [파�명] �는 history -ps "
+"arg [��...]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [jobspec ...] �는 jobs -x command [args]"
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [jobspec ... | pid ...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... �는 kill -l "
+"[sigspec]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let arg [arg ...]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o 옵션�름] [--] [arg ...]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [name ...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [name[=value] ...] �는 export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [name[=value] ...] �는 readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source 파�명 [��들]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". 파�명 [��들]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [expr]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ ��... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[arg] signal_spec ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] name [name ...]"
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [모드]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-fn] [id ...]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [pid ...]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for NAME [in WORDS ... ] ; do COMMANDS; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select NAME [in WORDS ... ;] do COMMANDS; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] pipeline"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case 단어 in [패턴 [| 패턴]...) 명령어 ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if 명령어; then 명령어; [ elif 명령어; then 명령어; ]... [ else 명령어; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while 명령어; do 명령어; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until 명령어; do 명령어; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [NAME] command [redirections]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function name { 명령어 ; } �는 name () { 명령어 ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ 명령어 ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "job_spec [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( 표현� ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ 표현� ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr ""
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | dir]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [옵션�름...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v 변수] format [��]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist]  [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist]  "
+"[-F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+
+#: builtins.c:239
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o option] [-DEI] [name ...]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+
+#: builtins.c:244
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+
+#: builtins.c:354
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Null 명령.\n"
+"    \n"
+"    효과 없�; 아무것� 하지 않습니다.\n"
+"    \n"
+"    종료 �태:\n"
+"    항� 성공합니다."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"성공�� 결과를 반환합니다.\n"
+"    \n"
+"    종료 �태:\n"
+"    항� 성공합니다."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"실패한 결과를 반환합니다.\n"
+"    \n"
+"    종료 �태:\n"
+"    항� 실패합니다."
+
+#: builtins.c:471
+#, fuzzy
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"간단한 명령� 실행하거나 명령� 관한 정보를 표시합니다..\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    옵션:\n"
+"      -p    표준 유틸리티를 전부 찾� 수 있다고 보장� PATH�\n"
+"            기본 값� 사용합니다.\n"
+"      -v    `type' 빌트�과 유사한 명령� 설명� 보여�니다\n"
+"      -V    � 명령� 관해 � �세한 정보를 보여�니다\n"
+"    \n"
+"    종료 �태:\n"
+"    명령� 실행 결과를 반환하거나 명령� 없� 경우 오류를 반환합니다."
+
+#: builtins.c:490
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"변수� 값과 �성� 설정합니다.\n"
+"    \n"
+"    `declare'� ��어 입니다.  `help declare'를 보십시오."
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+
+#: builtins.c:557
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+
+#: builtins.c:652
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"로그� 쉘� 나갑니다.\n"
+"    \n"
+"    종료 �태 N으로 로그� 쉘� 나갑니다.  로그� 쉘�서 실행�지 않는 경우\n"
+"    �러가 발�합니다."
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"쉘 실행� �시정지합니다.\n"
+"    \n"
+"    SIGCONT 신호를 받� 때 까지 쉘� 실행� �시 정지합니다.\n"
+"    강제 옵션� 없는 경우 로그� 쉘� �시 정지� 수 없습니다.\n"
+"    \n"
+"    옵션:\n"
+"      -f\t로그� 쉘� 경우�� �시 정지를 강제합니다.\n"
+"    \n"
+"    종료 �태:\n"
+"    job control� 활성화�지 않았거나 오류가 발�하지 않으면 성공� 반환합니"
+"다."
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+
+#: builtins.c:1431
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+
+#: builtins.c:1502
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+
+#: builtins.c:1726
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"디렉토리 스�� 보여�니다.\n"
+"    \n"
+"    현재 기억� 디렉토리� 목�� 보여�니다.  디렉토리들�\n"
+"    `pushd' 명령� 통해 목�� 경로를 저장할 수 있고; 'popd' \n"
+"    명령� 통해 거슬러 올�갈 수 있습니다.\n"
+"    \n"
+"    옵션:\n"
+"      -c\t�소를 전부 삭제함으로� 디렉토리 스�� 초기화합니다\n"
+"      -l\t홈 디렉토리까지 ~로 축약� �대경로를 표시하지 않습니다\n"
+"      -p\t한 줄� 하나씩 디렉토리 스�� 표시합니다\n"
+"      -v\t한 줄� 하나씩 스�� 위치와 함께 디렉토리 스�� 표시합니다\n"
+"    \n"
+"    ��:\n"
+"      +N\t�� 없� 실행� 때 보여지는 목�� 왼쪽부터 N번째 항목� 보여�니"
+"다.\n"
+"    \t세는 수는 0부터 시작합니다.\n"
+"    \n"
+"      -N\t�� 없� 실행� 때 보여지는 목�� 오른쪽부터 N번째 항목� 보여�"
+"니다.\n"
+"\t세는 수는 0부터 시작합니다.\n"
+"    종료 �태:\n"
+"    유효하지 않� 옵션� 주어지거나 오류가 발�하지 않는다면 성공� 반환합니"
+"다."
+
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+
+#: builtins.c:1971
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"파��서 줄� �어 배열 변수� 넣습니다.\n"
+"    \n"
+"    `mapfile'� ��어."
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "현재 서브루틴 콜� 컨�스트를 반환합니다.\n"
+#~ "    \n"
+#~ "    EXPR� 없으면, 다�� 반환 "
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process: 프로세스 %5ld (%s) 는 the_pipeline� 있�"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "알 수 없는 신호 #"
diff --git a/po/lt.gmo b/po/lt.gmo
new file mode 100644
index 0000000..31a29ca
--- /dev/null
+++ b/po/lt.gmo
diff --git a/po/lt.po b/po/lt.po
new file mode 100644
index 0000000..06bdb44
--- /dev/null
+++ b/po/lt.po
@@ -0,0 +1,4694 @@
+# translation of bash-4.0.po to Lithuanian
+# Copyright (C) 2008 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+#
+# Gintautas Miliauskas <gintas@akl.lt>, 2009.
+msgid ""
+msgstr ""
+"Project-Id-Version: bash-4.0\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2009-03-25 16:49+0200\n"
+"Last-Translator: Gintautas Miliauskas <gintas@akl.lt>\n"
+"Language-Team: Lithuanian <komp_lt@konferencijos.lt>\n"
+"Language: lt\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"X-Generator: KBabel 1.11.4\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && (n"
+"%100<10 || n%100>=20) ? 1 : 2);\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "blogas masyvo indeksas"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr ""
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr ""
+
+#: arrayfunc.c:700
+#, fuzzy, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: netaisyklingas veiksmo pavadinimas"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: nepavyko priskirti prie neskaitinio indekso"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr ""
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: nepavyko sukurti: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr "bash_execute_unix_command: nepavyko rasti keymapo komandai"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: pirmas ne tarpo simbolis nėra „\"“"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "nėra uždaran�iojo „%c“ %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: trūksta dvitaškio skirtuko"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "„%s“: nepavyko atjungti (unbind)"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr ""
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr ""
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr ""
+
+#: builtins/alias.def:131 variables.c:1844
+#, fuzzy, c-format
+msgid "`%s': invalid alias name"
+msgstr "„%s“: netaisyklingas keymap'o pavadinimas"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "eilutės redagavimas neįgalintas"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "„%s“: netaisyklingas keymap'o pavadinimas"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: nepavyko perskaityti: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "„%s“: nežinomas funkcijos pavadinimas"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s nėra priskirtas jokiam klavišui.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s gali būti iškviestas su "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "„%s“: nepavyko atjungti (unbind)"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr ""
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "prasminga tik „for“, „while“ arba „until“ cikle"
+
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Grąžina esamos procedūros kontekstą.\n"
+"    \n"
+"    Be IŠRAIŠKOS, grąžina „$eilutė $failo_vardas“.  Su IŠRAIŠKA,\n"
+"    grąžina „$eilutė $procedūra $failo_vardas“; ši papildoma informacija\n"
+"    gali būti panaudota kuriant steko išrašą (stack trace).\n"
+"    \n"
+"    IŠRAIŠKOS reikšmė nurodo, per kiek kvietimo freimų grįžti nuo\n"
+"    esamo; viršutinis freimas yra 0."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "HOME nenustatytas"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "per daug argumentų"
+
+#: builtins/cd.def:342
+#, fuzzy
+msgid "null directory"
+msgstr "steko viršūnėje esan�iu."
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "OLDPWD nenustatytas"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "eilutÄ— %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "įspėjimas: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: naudojimas: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: parametrui reikia argumento"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: reikia skaitinio argumento"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: nerasta"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: negalimas parametras"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: netaisyklingas parametro vardas"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "`%s': netaisyklingas identifikatorius"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "netaisyklingas aštuonetainis skai�ius"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "netaisyklingas šešioliktainis skai�ius"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "netaisyklingas skai�ius"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: netaisyklinga signalo specifikacija"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "„%s“: ne pid'as ar taisyklinga darbo specifikacija"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: kintamasis tik skaitymui"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s išėjo už ribų"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "argumentas"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s už ribų"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: nÄ—ra tokio darbo"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: nėra darbų valdymo"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "nėra darbų valdymo"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: apribota"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "apribota"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: ne vidinÄ— aplinkos komanda"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "rašymo klaida: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr ""
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr ""
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: klaida skaitant esamÄ… aplankÄ…: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: dviprasmis darbo aprašymas"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr ""
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: nepavyko ištrinti: %s tik skaitymui"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: nepavyko ištrinti"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: netaisyklingas veiksmo pavadinimas"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: nÄ—ra baigimo specifikacijos"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "įspėjimas: parametras -F gali neveikti taip, kaip tikitės"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "įspėjimas: parametras -C gali neveikti taip, kaip tikitės"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr ""
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "galima naudoti tik funkcijoje"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr ""
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr ""
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr ""
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr ""
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "negalima naudoti „-f“ funkcijoms kurti"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: funkcija tik skaitymui"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr ""
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: negalima tokiu būdu sunaikinti masyvų kintamųjų"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr ""
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "dinaminis įkrovimas negalimas"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "nepavyko atverti bendrojo objekto %s: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "nepavyko rasti %s bendrajame objekte %s: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: nedinamiškai įkrauta"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr ""
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: nedinamiškai įkrauta"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: nepavyko ištrinti: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: aplankas"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: ne paprastas failas"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: failas per didelis"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: negalima vykdyti dvejetainių failų"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: nepavyko paleisti: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr ""
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "ne prisijungimo aplinka: naudokite „exit“"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Yra sustabdytų darbų.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Yra veikian�ių darbų.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "komandų nerasta"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "istorijos specifikacija"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: nepavyko atverti laikinojo failo: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr ""
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "darbas %d pradėtas be darbų valdymo"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: neleistinas parametras -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: parametrui reikia argumento -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "maiša išjungta"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: maišos lentelė tuš�ia\n"
+
+#: builtins/hash.def:267
+#, fuzzy, c-format
+msgid "hits\tcommand\n"
+msgstr "paskutinÄ— komanda: %s\n"
+
+#: builtins/help.def:133
+#, fuzzy
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Aplinkos komandos, atitinkan�ios raktažodį „"
+msgstr[1] "Aplinkos komandos, atitinkan�ios raktažodį „"
+msgstr[2] "Aplinkos komandos, atitinkan�ios raktažodį „"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"nėra žinyno temų, atitinkan�ių „%s“. Bandykite „help help“, „man -k %s“ arba "
+"„info %s“."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: nepavyko atverti: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Šios aplinkos komandos vidinės. Jei norite pamatyti šį sąrašą, įveskite "
+"„help“.\n"
+"Įveskite „help fn“, jei norite sužinoti daugiau apie funkciją „fn“.\n"
+"Įveskite „info bash“, jei norite daugiau sužinoti apie aplinką apskritai.\n"
+"Naudokite „man -k“ ir „info“, jei norite sužinoti daugiau apie komandas, "
+"nesan�iasšiame sąraše.\n"
+"\n"
+"Žvaigždutė (*) prie vardo reiškia, kad komanda išjungta.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "negalima naudoti daugiau negu vieno parametro iš -anrw"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "istorijos pozicija"
+
+#: builtins/history.def:340
+#, fuzzy, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: netaisyklingas parametro vardas"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: istorijos išskleidimas nesėkmingas"
+
+#: builtins/inlib.def:71
+#, fuzzy, c-format
+msgid "%s: inlib failed"
+msgstr "%s: istorijos išskleidimas nesėkmingas"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "su „-x“ neleidžiama naudoti kitų parametrų"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: argumentai turi būti procesų arba darbų ID"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Nežinoma klaida"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "tikėtasi išraiškos"
+
+#: builtins/mapfile.def:178
+#, fuzzy, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: ne masyvo kintamasis"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: netaisyklinga failo deskriptoriaus specifikacija"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: netaisyklingas failo deskriptorius: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, fuzzy, c-format
+msgid "%s: invalid line count"
+msgstr "%s: nesamas parametras"
+
+#: builtins/mapfile.def:299
+#, fuzzy, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: nesamas parametras"
+
+#: builtins/mapfile.def:316
+#, fuzzy, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: netaisyklingas veiksmo pavadinimas"
+
+#: builtins/mapfile.def:349
+#, fuzzy
+msgid "empty array variable name"
+msgstr "%s: ne masyvo kintamasis"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr ""
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "„%s“: trūksta formato simbolio"
+
+#: builtins/printf.def:474
+#, fuzzy, c-format
+msgid "`%c': invalid time format specification"
+msgstr "%s: klaidinga laiko ribos (timeout) specifikacija"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "„%c“: netaisyklingas formato simbolis"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "įspėjimas: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr ""
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "trūksta šešioliktainio skaitmens išraiškoje \\x"
+
+#: builtins/printf.def:900
+#, fuzzy, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "trūksta šešioliktainio skaitmens išraiškoje \\x"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "nÄ—ra kito aplanko"
+
+#: builtins/pushd.def:360
+#, fuzzy, c-format
+msgid "%s: invalid argument"
+msgstr "%s: netaisyklingas limito argumentas"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<nÄ—ra esamo aplanko>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr ""
+
+#: builtins/pushd.def:526
+#, fuzzy
+msgid "directory stack index"
+msgstr "rekursijos steko atvirkštinis perpildymas"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: klaidinga laiko ribos (timeout) specifikacija"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "skaitymo klaida: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr "galima grįžti (return) tik iš funkcijos ar scenarijaus"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "negalima kartu ištrinti funkcijos ir kintamojo"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: ne masyvo kintamasis"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: ne funkcija"
+
+#: builtins/setattr.def:194
+#, fuzzy, c-format
+msgid "%s: cannot export"
+msgstr "%s: nepavyko ištrinti"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "postūmių skai�ius"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "negalima aplinkos nuostatos vienu metu įjungti ir išjungti"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: netaisyklingas aplinkos nuostatos pavadinimas"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "reikia failo pavadinimo argumento"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: failas nerastas"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "nepavyko sustabdyti"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "nepavyko sustabdyti prisijungimo aplinkos"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s yra „%s“ sinonimas\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s yra aplinkos raktinis žodis\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s yra funkcija\n"
+
+#: builtins/type.def:299
+#, fuzzy, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s yra aplinkos vidinÄ— komanda\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s yra aplinkos vidinÄ— komanda\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s yra %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s yra hešuotas (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: netaisyklingas limito argumentas"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "`%c': bloga komanda"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: nepavyko gauti limito: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "riba"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: nepavyko pakeisti limito: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "aštuntainis skai�ius"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "„%c“: netaisyklingas simbolinės veiksenos operatorius"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "„%c“: netaisyklingas simbolinės veiksenos simbolis"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " eilutÄ— "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "paskutinÄ— komanda: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Nutraukiama..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr ""
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "nežinoma komandos klaida"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "blogas komandos tipas"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "blogas jungtukas"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "blogas Å¡uolis"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: nepriskirtas kintamasis"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\alaukiant įvedimo baigėsi laikas: automatiškai atsijungta\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "nepavyko peradresuoti standartinio įvedimo iš /dev/null: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "TIMEFORMAT: „%c“: netaisyklingas formato simbolis"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr ""
+
+#: execute_cmd.c:2486
+#, fuzzy
+msgid "pipe error"
+msgstr "rašymo klaida: %s"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: apribota: negalima naudoti „/“ komandų pavadinimuose"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: komanda nerasta"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr ""
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: blogas interpretatorius"
+
+#: execute_cmd.c:5891
+#, fuzzy, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: negalima vykdyti dvejetainių failų"
+
+#: execute_cmd.c:5977
+#, fuzzy, c-format
+msgid "`%s': is a special builtin"
+msgstr "%s yra aplinkos vidinÄ— komanda\n"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "nepavyko dublikuoti fd %d į fd %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "viršytas išraiškos rekursijos lygis"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "rekursijos steko atvirkštinis perpildymas"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "sintaksės klaida išraiškoje"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "bandymas priskirti ne kintamajam"
+
+#: expr.c:530
+#, fuzzy
+msgid "syntax error in variable assignment"
+msgstr "sintaksės klaida išraiškoje"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "dalyba iš 0"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "klaida: bloga expassign leksema"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "sąlygos išraiškoje tikėtasi „:“"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "eksponentė mažesnis už 0"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr ""
+"po prieš-didinimo ar prieš-mažinimo operatoriaus tikėtasi identifikatoriaus"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "Trūksta „)“"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "sintaksÄ—s klaida: tikÄ—tasi operando"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "sintaksÄ—s klaida: netaisyklingas aritmetinis operatorius"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr ""
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "netaisyklingas aritmetinis pagrindas"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: nesamas parametras"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "per didelė pagrindo reikšmė"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: išraiškos klaida\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: nepavyko pasiekti aukštesnių aplankų"
+
+#: input.c:99 subst.c:6069
+#, fuzzy, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "nepavyko dublikuoti fd %d į fd %d"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr "nepavyko išskirti naujo failo deskriptoriaus bash įvedimui iš fd %d"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input: naujam fd %d buferis jau egzistuoja"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr ""
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr ""
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "trinamas sustabdytas darbas %d procesų grupėje %ld"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr ""
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: tokio pid nÄ—ra"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Signalas %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Atlikta"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr ""
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr ""
+
+#: jobs.c:1892
+msgid "Running"
+msgstr ""
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Atlikta(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr ""
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Nežinoma būsena"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr ""
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr ""
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr ""
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: pid %ld nÄ—ra Å¡ios aplinkos dukterinis procesas"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: nėra proceso %ld įrašo"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: darbas %d yra sustabdytas"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: nÄ—ra tokio darbo"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: darbas užsibaigė"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: darbas %d jau fone"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr ""
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: %d eilutÄ—: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr ""
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr ""
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr ""
+
+#: jobs.c:4447
+msgid "initialize_job_control: no job control in background"
+msgstr ""
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr ""
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr ""
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr ""
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "šioje aplinkoje nėra darbų valdymo"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: pažeista prielaida: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d: prielaida pažeista\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "nežinoma"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: blokas iš laisvų blokų sąrašo sugadintas"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: iškviestas su jau atlaisvintu bloku"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: iškviestas su nerezervuotu bloku"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: atvirkštinis perpildymas (underflow); mh_nbytes už ribos"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: atvirkštinis perpildymas (underflow); mh_nbytes už ribos"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: pradžios ir pabaigos blokų (chunk) dydžiai skiriasi"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: iškviestas su nerezervuotu bloku"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc: atvirkštinis perpildymas (underflow); mh_nbytes už ribos"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc: atvirkštinis perpildymas (underflow); mh_nbytes už ribos"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: pradžios ir pabaigos blokų (chunk) dydžiai skiriasi"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: alloc lentelÄ— pilna su FIND_ALLOC?\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: %p jau lentelÄ—je kaip rezervuotas?\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: %p jau lentelÄ—je kaip laisvas?\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "netaisyklingas pagrindas"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: adresas nežinomas"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: netaisyklinga tarnyba"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: netaisyklingas tinklo kelias"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "tinklo operacijos nepalaikomos"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr ""
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr ""
+
+#: locale.c:292
+#, fuzzy, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "xrealloc: %s:%d: nepavyko išskirti %lu baitų"
+
+#: locale.c:294
+#, fuzzy, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "xrealloc: %s:%d: nepavyko išskirti %lu baitų"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "Turite laiškų $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "Turite naujų laiškų $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "Paštas %s perskaitytas\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "sintaksės klaida: reikia aritmetinės išraiškos"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "sintaksės klaida: netikėtas „;“"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "sintaksės klaida: „((%s))“"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: blogas instrukcijos tipas %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr ""
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr "make_redirection: nukreipimo instrukcija „%d“ už ribų"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr ""
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "netikėta failo pabaiga ieškant atitinkamo „%c“"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "netikėta failo pabaiga ieškant „]]“"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "sintaksės klaida sąlygos išraiškoje: netikėta leksema „%s“"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "sintaksės klaida sąlygos išraiškoje"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "netikėta leksema „%s“, tikėtasi „)“"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "tikėtasi „)“"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "netikėtas argumentas „%s“ sąlygos unariniam operatoriui"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "netikÄ—tas argumentas sÄ…lygos unariniam operatoriui"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "netikėta leksema „%s“, tikėtasi sąlyginio binarinio operatoriaus"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "tikÄ—tasi sÄ…lygos binarinio operatoriaus"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "netikėtas argumentas „%s“ sąlygos binariniam operatoriui"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "netikÄ—tas argumentas sÄ…lygos binariniam operatoriui"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "netikėta leksema „%c“ sąlygos komandoje"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "netikėta leksema „%s“ sąlygos komandoje"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "netikÄ—ta leksema %d sÄ…lygos komandoje"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "sintaksės klaida prie netikėtos leksemos: „%s“"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "sintaksės klaida prie „%s“"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "sintaksÄ—s klaida: netikÄ—ta failo pabaiga"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "sintaksÄ—s klaida"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Naudokite „%s“, jei norite išeiti iš ap.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "netikėta failo pabaiga ieškant atitinkamo „)“"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "completion: funkcija „%s“ nerasta"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr ""
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: NULL COMPSPEC"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: blogas jungtukas  „%d“"
+
+#: print_cmd.c:375
+#, fuzzy, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "%d: netaisyklingas failo deskriptorius: %s"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr ""
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr ""
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: „%c“: netaisyklingas formato simbolis"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "failo deskriptorius už ribų"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: ambiguous redirect"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: negalima perrašyti egzistuojan�io failo"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: apribota: negalima peradresuoti išvedimo"
+
+#: redir.c:218
+#, fuzzy, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "nepavyko sukurti laikino failo „here“ dokumentui: %s"
+
+#: redir.c:222
+#, fuzzy, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: negalima priskirti sąrašo masyvo elementui"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "/dev/(tcp|udp)/serveris/prievadas nepalaikoma be tinklo"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "nukreipimo klaida: nepavyko dublikuoti fd"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "nepavyko rasti /tmp, sukurkite šį aplanką!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp turi būti taisyklingas aplanko pavadinimas"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr ""
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: netaisyklingas parametras"
+
+#: shell.c:1319
+#, fuzzy, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "nepavyko dublikuoti fd %d į fd %d"
+
+#: shell.c:1330
+#, fuzzy, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "nepavyko dublikuoti fd %d į fd %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr ""
+
+#: shell.c:1632
+#, fuzzy, c-format
+msgid "%s: Is a directory"
+msgstr "%s: aplankas"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "Neturiu vardo!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, versija %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Naudojimas:\t%s [GNU ilgas parametras] [parametras] ...\n"
+"\t%s [GNU ilgas parametras] [parametras] scenarijaus-failas ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "GNU ilgi parametrai:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Aplinkos parametrai:\n"
+
+#: shell.c:2043
+#, fuzzy
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr ""
+"\t-irsD arba -c komanda arba -O shopt_nustatymas\t\t(tik iškvietimui)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s arba -o nustatymas\n"
+
+#: shell.c:2068
+#, fuzzy, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+"Bandykite „%s --help“ arba „%s --usage“, jei norite gauti daugiau "
+"informacijos.\n"
+
+#: shell.c:2069
+#, fuzzy, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr "Bandykite „ldd --help“, jei norite daugiau informacijos."
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "Naudokite komandą „bashbug“ klaidoms pranešti.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr ""
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr ""
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: netaisyklinga operacija"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr ""
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr ""
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr ""
+
+#: siglist.c:58
+msgid "Quit"
+msgstr ""
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr ""
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr ""
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "ABORT instrukcija"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr ""
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Slankaus kablelio klaida"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr ""
+
+#: siglist.c:90
+#, fuzzy
+msgid "Bus error"
+msgstr "sintaksÄ—s klaida"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Segmentacijos klaida"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr ""
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr ""
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Žadintuvas"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Nutraukta"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr ""
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Sustabdyta (signalas)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Tęsti"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr ""
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Sustabdyta (tty įvedimas)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Sustabdyta (tty išvedimas)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr ""
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "CPU riba"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "Failų riba"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr ""
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr ""
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Langas pakeistas"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr ""
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr ""
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr ""
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr ""
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr ""
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr ""
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "proceso migravimas į kitą CPU"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "programavimo klaida"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr ""
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr ""
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr ""
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "Informacijos užklausa"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "Nežinomas signalas #%d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "blogas keitinys: trūksta „%s“ %s"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: negalima priskirti sąrašo masyvo elementui"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr ""
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr ""
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr ""
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr ""
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr ""
+
+#: subst.c:6213
+#, fuzzy
+msgid "command substitution: ignored null byte in input"
+msgstr "blogas keitinys: trūksta „%s“ %s"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr ""
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr ""
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr ""
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr ""
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, fuzzy, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: nesamas parametras"
+
+#: subst.c:7013 subst.c:7177
+#, fuzzy, c-format
+msgid "%s: invalid variable name"
+msgstr "%s: netaisyklingas veiksmo pavadinimas"
+
+#: subst.c:7256
+#, fuzzy, c-format
+msgid "%s: parameter not set"
+msgstr "%s: parametras tuš�ias arba nenustatytas"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: parametras tuš�ias arba nenustatytas"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: posekio išraiška < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: blogas keitinys"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: negalima tokiu būdu priskirti"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+
+#: subst.c:10367
+#, fuzzy, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "blogas keitinys: trūksta „%s“ %s"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "nėra atitikmenų: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "tikÄ—tasi argumento"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: tikėtasi skaitinės išraiškos"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "tikėtasi „)“"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "tikėtasi „)“, rasta %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: tikÄ—tasi binarinio operatoriaus"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: tikÄ—tasi unarinio operatoriaus"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "trūksta „]“"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "sintaksės klaida: netikėtas „;“"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "netaisyklingas signalo numeris"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr ""
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: bloga trap_list[%d] reikšmė: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr "run_pending_traps: signalo doroklė yra SIG_DFL, siun�iamas %d (%s) sau"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: blogas signalas %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "klaida importuojant funkcijos apibrėžimą „%s“"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "aplinkos lygmuo (%d) per aukštas, nustatoma į 1"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr ""
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr ""
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr ""
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr ""
+
+#: variables.c:4771
+#, fuzzy, c-format
+msgid "%s has null exportstr"
+msgstr "%s: parametras tuš�ias arba nenustatytas"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "netaisyklingas simbolis %d %s exportstr'e"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "%s exportstr'e trūksta „=“"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr ""
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: nÄ—ra global_variables konteksto"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr ""
+
+#: variables.c:6387
+#, fuzzy, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: nepavyko atverti: %s"
+
+#: variables.c:6392
+#, fuzzy, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%d: netaisyklingas failo deskriptorius: %s"
+
+#: variables.c:6437
+#, fuzzy, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s išėjo už ribų"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "AutorinÄ—s teisÄ—s (C) 2009 Free Software Foundation, Inc."
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"Licencija GPLv3+: GNU GPL versija 3 arba naujesnÄ— <http://gnu.org/licenses/"
+"gpl.html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, versija %s (%s)\n"
+
+#: version.c:91 version2.c:91
+#, fuzzy
+msgid "This is free software; you are free to change and redistribute it."
+msgstr ""
+"Tai yra laisva programinė įranga; jūs esate laisvas keisti ir platinti ją.\n"
+
+#: version.c:92 version2.c:92
+#, fuzzy
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "Nėra JOKIOS GARANTIJOS, kiek tik tą leidžia įstatymas.\n"
+
+#: xmalloc.c:93
+#, fuzzy, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "xmalloc: nepavyko išskirti %lu baitų (%lu baitų išskirta)"
+
+#: xmalloc.c:95
+#, fuzzy, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "xmalloc: nepavyko išskirti %lu baitų"
+
+#: xmalloc.c:165
+#, fuzzy, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "xmalloc: %s:%d: nepavyko išskirti %lu baitų (išskirta %lu baitų)"
+
+#: xmalloc.c:167
+#, fuzzy, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "xmalloc: %s:%d: nepavyko išskirti %lu baitų"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [pavadinimas[=reikšmė] ... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] pavadinimas [pavadinimas ...]"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [aplinkos-komanda [arg ...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [išraiška]"
+
+#: builtins.c:66
+#, fuzzy
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|-P] [aplankas]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] komanda [arg ...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFilrtux] [-p] [pavadinimas[=reikšmė] ...]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFilrtux] [-p] pavadinimas[=reikšmė] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [option] pavadinimas[=reikšmė] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [arg ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [arg ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f failopavadinimas] [pavadinimas ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [arg ...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts optsekos pavadinimas [arg]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr ""
+"exec [-cl] [-a pavadinimas] [komanda [argumentai ...]] [nukreipimas ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr "fc [-e evardas] [-lnr] [pirm] [pask] arba fc -s [pat=rep] [komanda]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr ""
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr ""
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr ""
+
+#: builtins.c:119
+#, fuzzy
+msgid "help [-dms] [pattern ...]"
+msgstr "echo [-n] [arg ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr ""
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr ""
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s sigspec | -n signum | -sigspec] pid | darbospec ... arba kill -l "
+"[sigspec]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let arg [arg ...]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+#, fuzzy
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [--abefhkmnptuvxBCHP] [-o nustatymas] [arg ...]"
+
+#: builtins.c:144
+#, fuzzy
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [pavadinimas ...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [pavadinimas[=vertÄ—] ...] arba export -p"
+
+#: builtins.c:148
+#, fuzzy
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-af] [pavadinimas[=vertÄ—] ...] arba readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source failopavadinimas [argumentai]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". failopavadinimas [argumentai]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [išrk]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ arg... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[arg] signalo_spec ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] pavadinimas [pavadinimas ...]"
+
+#: builtins.c:171
+#, fuzzy
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHacdefilmnpqrstuvx] [riba]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [režimas]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [id]"
+
+#: builtins.c:181
+#, fuzzy
+msgid "wait [pid ...]"
+msgstr "wait [pid]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for PAVADINIMAS [in ŽODŽIAI ... ] ; do KOMANDOS; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( išrk1; išrk2; išrk3 )); do KOMANDOS; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select PAVADINIMAS [in ŽODŽIAI ... ;] do KOMANDOS; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr ""
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr ""
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if KOMANDOS; then KOMANDOS; [ elif KOMANDOS; then KOMANDOS; ]... [ else "
+"KOMANDOS; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while KOMANDOS; do KOMANDOS; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until KOMANDOS; do KOMANDOS; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr ""
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "funkcijos pavadinimas { KOMANDOS ; } arba name () { KOMANDOS ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ KOMANDOS ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "darbo_spec [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( išraiška ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ išraiška ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "kintamieji – Kai kurių aplinkos kintamųjų pavadinimai ir reikšmės"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | dir]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [optvardas ...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v kint] formatas [argumentai]"
+
+#: builtins.c:231
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+
+#: builtins.c:235
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+
+#: builtins.c:239
+#, fuzzy
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "shopt [-pqsu] [-o] [optvardas ...]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+
+#: builtins.c:244
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+
+#: builtins.c:256
+#, fuzzy
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"„alias“ be argumentų arba su -p nuostata išspausdina alternatyviųjų\n"
+"    vardų sąrašą formatu VARDAS=REIKŠMĖ į standartinį išvedimą.\n"
+"    Kitu atveju aprašomas alternatyvusis vardas kiekvienam VARDUI,\n"
+"    kurio REIKÅ MÄ– nurodyta.\n"
+"Jei REIKÅ MÄ– baigiasi tarpo simboliu, kitame\n"
+"    žodyje ieškoma alternatyviųjų vardų keitinių, kai alternatyvusis vardas\n"
+"    išskleidžiamas.  „alias“ grąžina „true“, nebent duotas VARDAS, kuriam\n"
+"    neaprašytas joks alternatyvusis vardas."
+
+#: builtins.c:278
+#, fuzzy
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Pašalinti VARDUS iš aprašytų alternatyviųjų vardų sąrašo.  Jei nurodyta\n"
+"    nuostata -a, pašalinti visus alternatyviuosius vardus."
+
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+
+#: builtins.c:342
+#, fuzzy
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Tęsti kitą FOR, WHILE arba UNTIL ciklo iteraciją.\n"
+"    Jei N nurodytas, tęsti ciklą, esantį N lygmenų virš esamo."
+
+#: builtins.c:354
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+
+#: builtins.c:369
+#, fuzzy
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Grąžina esamos procedūros kontekstą.\n"
+"    \n"
+"    Be IŠRAIŠKOS, grąžina „$eilutė $failo_vardas“.  Su IŠRAIŠKA,\n"
+"    grąžina „$eilutė $procedūra $failo_vardas“; ši papildoma informacija\n"
+"    gali būti panaudota kuriant steko išrašą (stack trace).\n"
+"    \n"
+"    IŠRAIŠKOS reikšmė nurodo, per kiek kvietimo freimų grįžti nuo\n"
+"    esamo; viršutinis freimas yra 0."
+
+#: builtins.c:387
+#, fuzzy
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"Pakeisti esamą aplanką į DIR.  Kintamasis $HOME yra\n"
+"    numatytasis DIR.  Kintamasis CDPATH nurodo aplankus, kuriuose bus\n"
+"    ieškoma DIR.  Aplankų pavadinimai CDPATH skiriami dvitaškiu (:).\n"
+"    Tuš�ias aplanko vardas tapatus esamam aplankui, t.y. „.“.\n"
+"    Jei DIR prasideda pasviruoju brūkšniu (/), į CDPATH neatsižvelgiama.\n"
+"    Jei aplankas nerastas ir aplinkos nuostata „cdable_vars“ įjungta,\n"
+"    tada žodis bandomas kaip kintamojo pavadinimas.  Jei kintamasis\n"
+"    turi reikšmę, tada esamas aplankas pakei�iamas į kintamojo reikšmę.\n"
+"    Parametras -P nurodo, kad turi būti naudojama fizinė aplankų struktūra,\n"
+"    užuot sekus simbolines nuorodas; parametras -L nurodo, kad turi būti\n"
+"    sekama simbolinÄ—mis nuorodomis."
+
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+
+#: builtins.c:442
+#, fuzzy
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr "Jokio efekto; komanda nieko nedaro.  Grąžinamas klaidos kodas 0."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+
+#: builtins.c:462
+#, fuzzy
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr "Grąžinti nesėkmingą rezultatą."
+
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+
+#: builtins.c:490
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+
+#: builtins.c:557
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+
+#: builtins.c:652
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+
+#: builtins.c:715
+#, fuzzy
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Išeiti iš aplinkos su klaidos kodu N.  Jei N nenurodytas, išeinant "
+"nustatomas\n"
+"    paskutinÄ—s vykdytos komandos klaidos kodas."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+
+#: builtins.c:1214 builtins.c:1229
+#, fuzzy
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Skaityti ir vykdyti komandas iš FAILO ir grįžti.  Keliai\n"
+"    kintamajame $PATH naudojami aplankui, kuriame yra FAILAS, rasti.\n"
+"    Jei nurodyta ARGUMENTŲ, jie tampa poziciniais parametrais iškvietus\n"
+"    FAILÄ„."
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+
+#: builtins.c:1431
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+
+#: builtins.c:1502
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1647
+#, fuzzy
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Išskleisti ir vykdyti KOMANDAS tol, kol galutinė komanda iš\n"
+"    „while“ komandų grąžina klaidos kodą 0."
+
+#: builtins.c:1659
+#, fuzzy
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Išskleisti ir vykdyti KOMANDAS tol, kol galutinė komanda iš\n"
+"    „until“ komandų grąžina klaidos kodą, nelygų 0."
+
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+
+#: builtins.c:1699
+#, fuzzy
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Vykdyti eilę komandų grupėje.  Tai yra vienas iš būdų nukreipti\n"
+"    visos eilės komandų įvedimą/išvedimą."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+
+#: builtins.c:1726
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+
+#: builtins.c:1937
+#, fuzzy
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"printf formatuoja ir spausdina ARGUMENTUS nurodytu FORMATU. FORMATAS\n"
+"    yra simbolių seka, sudaryta iš trijų tipų objektų: paprastų\n"
+"    simbolių, tiesiog nukopijuojamų į standartinį išvedimą,\n"
+"    kaitos sekų, konvertuojamų ir kopijuojamų į standartinį išvedimą,\n"
+"    ir formato specifikacijų, kurių kiekviena išspausdina kitą argumentą.\n"
+"    Be įprastų printf(1) formatų, %b reiškia išplėsti kairinio brūkšnio\n"
+"    („\\“) kaitos sekas atitinkamame argumente, o %q reiškia išvesti\n"
+"    argumentą kabutėse tokia forma, kad rezultatą būtų galima\n"
+"    panaudoti įvedimui.\n"
+"    Jei pateiktas parametras -v, išvedimas įrašomas į aplinkos kintamąjį\n"
+"    KINT, užuot spausdinus į standartinį išvedimą."
+
+#: builtins.c:1971
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:2001
+#, fuzzy
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Rodyti galimus užbaigimus priklausomai nuo nustatymų.  Naudotina\n"
+"    iš aplinkos funkcijos, generuojan�ios galimus užbaigimus.\n"
+"    Jei pateiktas nebūtinasis ŽODŽIO argumentas, išvedami įrašai,\n"
+"    atitinkantys ŽODĮ."
+
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+
+#, fuzzy
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr "Grąžina esamos procedūros kontekstą."
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "Nežinomas signalas #"
+
+#~ msgid "xrealloc: cannot reallocate %lu bytes (%lu bytes allocated)"
+#~ msgstr "xrealloc: nepavyko išskirti %lu baitų (išskirta %lu baitų)"
+
+#~ msgid "xrealloc: cannot allocate %lu bytes"
+#~ msgstr "xrealloc: nepavyko išskirti %lu baitų"
+
+#~ msgid "xrealloc: %s:%d: cannot reallocate %lu bytes (%lu bytes allocated)"
+#~ msgstr "xrealloc: %s:%d: nepavyko išskirti %lu baitų (išskirta %lu baitų)"
+
+#~ msgid ":"
+#~ msgstr ":"
+
+#~ msgid "true"
+#~ msgstr "true"
+
+#~ msgid "false"
+#~ msgstr "false"
+
+#~ msgid "times"
+#~ msgstr "times"
+
+#~ msgid " "
+#~ msgstr " "
+
+#~ msgid "Without EXPR, returns returns \"$line $filename\".  With EXPR,"
+#~ msgstr "Be EXPR, grąžina „$line $filename“.  Su EXPR,"
+
+#~ msgid "returns \"$line $subroutine $filename\"; this extra information"
+#~ msgstr "grąžina „$line $subroutine $filename“; ši papildoma informacija"
+
+#~ msgid "can be used used to provide a stack trace."
+#~ msgstr "gali būti panaudota generuojant steko išrašą (stack trace)."
+
+#~ msgid ""
+#~ "The value of EXPR indicates how many call frames to go back before the"
+#~ msgstr "EXPR reikšmė nurodo, per kiek kvietimo freimų eiti atgal prieš"
+
+#~ msgid "current one; the top frame is frame 0."
+#~ msgstr "esamą.  Viršutinis freimas yra 0."
+
+#~ msgid "%s: invalid number"
+#~ msgstr "%s: netaisyklingas skai�ius"
+
+#~ msgid "Shell commands matching keywords `"
+#~ msgstr "Aplinkos komandos, atitinkan�ios raktažodžius „"
+
+#~ msgid "Display the list of currently remembered directories.  Directories"
+#~ msgstr "Rodyti prisimenamų aplankų sąrašą. Aplankai"
+
+#~ msgid "find their way onto the list with the `pushd' command; you can get"
+#~ msgstr "atsiduria sąraše su „pushd“ komanda; galite kilti"
+
+#~ msgid "back up through the list with the `popd' command."
+#~ msgstr "sąrašu su „popd“ komanda."
+
+#~ msgid ""
+#~ "The -l flag specifies that `dirs' should not print shorthand versions"
+#~ msgstr "Parametras -l nurodo, kad „dirs“ neturėtų spausdinti sutrumpintų"
+
+#~ msgid ""
+#~ "of directories which are relative to your home directory.  This means"
+#~ msgstr "aplankų, santykinių namų aplinkui, pavadinimų. Tai reiškia, kad"
+
+#, fuzzy
+#~ msgid "that `~/bin' might be displayed as `/homes/bfox/bin'.  The -v flag"
+#~ msgstr "kad „~/bin“ bus rodomas kaip „/home/bfox/bin“.  Su parametru -v"
+
+#~ msgid "causes `dirs' to print the directory stack with one entry per line,"
+#~ msgstr "„dirs“ išveda aplankų steką po vieną pavadinimą eilutėje,"
+
+#~ msgid ""
+#~ "prepending the directory name with its position in the stack.  The -p"
+#~ msgstr "prieš pavadinimą prirašoma aplanko pozicija steke. Parametras -p"
+
+#~ msgid "flag does the same thing, but the stack position is not prepended."
+#~ msgstr "turi tokį patį efektą, ta�iau pozicija steke neišvedama."
+
+#~ msgid ""
+#~ "The -c flag clears the directory stack by deleting all of the elements."
+#~ msgstr "Parametras -c išvalo aplankų steką."
+
+#~ msgid ""
+#~ "+N   displays the Nth entry counting from the left of the list shown by"
+#~ msgstr "+N   rodo N-tąjį įrašą skai�iuojant iš kairės sąraše, rodomame"
+
+#~ msgid "     dirs when invoked without options, starting with zero."
+#~ msgstr "     „dirs“, iškviesto be parametrų (skai�iuojama nuo nulio)."
+
+#~ msgid ""
+#~ "-N   displays the Nth entry counting from the right of the list shown by"
+#~ msgstr "-N   rodo N-tajį įrašą skai�iuojant iš dešinės sąraše, rodomame"
+
+#~ msgid "Adds a directory to the top of the directory stack, or rotates"
+#~ msgstr "Įdeda aplanką į aplankų steko viršų, arba pasuka"
+
+#~ msgid "the stack, making the new top of the stack the current working"
+#~ msgstr "steką, nustatydamas esamą aplanką į naująją steko viršūnės reikšmę."
+
+#~ msgid "directory.  With no arguments, exchanges the top two directories."
+#~ msgstr "Be argumentų, sukei�ia viršutinius du aplankus."
+
+#~ msgid "+N   Rotates the stack so that the Nth directory (counting"
+#~ msgstr "+N   Pasuka steką, kad N-tasis aplankas (skai�iuojant"
+
+#~ msgid "     from the left of the list shown by `dirs', starting with"
+#~ msgstr "     iš kairės sąraše, rodomame „dirs“, pradedant nuo nulio)"
+
+#~ msgid "     zero) is at the top."
+#~ msgstr "     būtų viršuje."
+
+#~ msgid "-N   Rotates the stack so that the Nth directory (counting"
+#~ msgstr "-N   Pasuka steką, kad N-tasis aplankas (skai�iuojant"
+
+#~ msgid "     from the right of the list shown by `dirs', starting with"
+#~ msgstr "     iš dešinės sąraše, rodomame „dirs“, pradedant nuo nulio)"
+
+#~ msgid "-n   suppress the normal change of directory when adding directories"
+#~ msgstr "-n   išjungti įprastą aplanko pakeitimą pridedant aplankus"
+
+#~ msgid "     to the stack, so only the stack is manipulated."
+#~ msgstr "     į steką, taigi, pakei�iamas tik stekas."
+
+#~ msgid "dir  adds DIR to the directory stack at the top, making it the"
+#~ msgstr "dir  prideda DIR į aplankų steko viršų; DIR nustatomas"
+
+#~ msgid "     new current working directory."
+#~ msgstr "     naujuoju darbiniu aplanku."
+
+#~ msgid "You can see the directory stack with the `dirs' command."
+#~ msgstr "Galite pamatyti aplankų steką komanda „dirs“."
+
+#~ msgid "Removes entries from the directory stack.  With no arguments,"
+#~ msgstr "Šalina įrašus iš aplankų steko. Jei nenurodyta argumentų,"
+
+#~ msgid "removes the top directory from the stack, and cd's to the new"
+#~ msgstr "pašalina viršutinį aplanką iš steko ir pakei�ia darbinį aplanką"
+
+#~ msgid "+N   removes the Nth entry counting from the left of the list"
+#~ msgstr ""
+#~ "+N   pašalina N-tąjį įrašą skai�iuojant iš kairės sąraše, išvedamame „dir“"
+
+#~ msgid "     shown by `dirs', starting with zero.  For example: `popd +0'"
+#~ msgstr "     (skai�iuojama nuo nulio).  Pavyzdžiui: „popd +0“"
+
+#~ msgid "     removes the first directory, `popd +1' the second."
+#~ msgstr "     pašalina pirmąjį aplanką, „popd +1“ – antrąjį."
+
+#~ msgid "-N   removes the Nth entry counting from the right of the list"
+#~ msgstr ""
+#~ "+N   pašalina N-tąjį įrašą skai�iuojant iš dešinės sąraše, išvedamame "
+#~ "„dir“"
+
+#~ msgid "     shown by `dirs', starting with zero.  For example: `popd -0'"
+#~ msgstr "     (skai�iuojama nuo nulio).  Pavyzdžiui: „popd -0“"
+
+#~ msgid "     removes the last directory, `popd -1' the next to last."
+#~ msgstr "     pašalina paskutinį aplanką, „popd -1“ – priešpaskutinį."
+
+#~ msgid ""
+#~ "-n   suppress the normal change of directory when removing directories"
+#~ msgstr "     išjungti įprastą darbinio aplanko keitimą šalinant aplankus"
+
+#~ msgid "     from the stack, so only the stack is manipulated."
+#~ msgstr "     iš steko, taigi, pakei�iamas tik stekas."
+
+#~ msgid "allocated"
+#~ msgstr "išskirta"
+
+#~ msgid "freed"
+#~ msgstr "atlaisvinta"
+
+#~ msgid "requesting resize"
+#~ msgstr "prašoma dydžio keitimo"
+
+#~ msgid "just resized"
+#~ msgstr "tik kÄ… pakeistas dydis"
+
+#~ msgid "bug: unknown operation"
+#~ msgstr "klaida: nežinoma operacija"
+
+#~ msgid "malloc: watch alert: %p %s "
+#~ msgstr "malloc: stebinio įspėjimas: %p %s "
+
+#~ msgid ""
+#~ "Exit from within a FOR, WHILE or UNTIL loop.  If N is specified,\n"
+#~ "    break N levels."
+#~ msgstr ""
+#~ "Išeiti iš FOR, WHILE arba UNTIL ciklo.  Jei nurodytas N,\n"
+#~ "    išeiti aukštyn per N lygmenų."
+
+#~ msgid ""
+#~ "Run a shell builtin.  This is useful when you wish to rename a\n"
+#~ "    shell builtin to be a function, but need the functionality of the\n"
+#~ "    builtin within the function itself."
+#~ msgstr ""
+#~ "Vykdyti aplinkos įtaisytą funkciją.  Ši komanda naudinga, kai norite\n"
+#~ "    vietoje įtaisytos funkcijos naudoti savąją, ta�iau reikia\n"
+#~ "    pasinaudoti įtaisytąja šios funkcijos viduje."
+
+#~ msgid ""
+#~ "Print the current working directory.  With the -P option, pwd prints\n"
+#~ "    the physical directory, without any symbolic links; the -L option\n"
+#~ "    makes pwd follow symbolic links."
+#~ msgstr ""
+#~ "Išspausdinti esamą aplanką.  Su parametru -P „pwd“ spausdina\n"
+#~ "    fizinį aplanką, be jokių simbolinių nuorodų; su parametru -L\n"
+#~ "    „pwd“ seka simbolinėmis nuorodomis."
+
+#~ msgid "Return a successful result."
+#~ msgstr "Grąžinti sėkmingą rezultatą."
+
+#~ msgid "Obsolete.  See `declare'."
+#~ msgstr "Pasenusi komanda.  Žr. „declare“."
+
+#~ msgid ""
+#~ "Create a local variable called NAME, and give it VALUE.  LOCAL\n"
+#~ "    can only be used within a function; it makes the variable NAME\n"
+#~ "    have a visible scope restricted to that function and its children."
+#~ msgstr ""
+#~ "Sukurti vietinį kintamąjį nurodytu PAVADINIMU ir suteikti jam REIKŠMĘ.\n"
+#~ "    „local“ gali būti naudojamas tik funkcijose; jis sukuria kintamąjį,\n"
+#~ "    matomą tik pa�ioje funkcijoje ir jos dukterinėse funkcijose."
+
+#~ msgid ""
+#~ "Output the ARGs.  If -n is specified, the trailing newline is suppressed."
+#~ msgstr ""
+#~ "IÅ¡spausdinti ARGUMENTUS.  Jei nurodytas -n, nespausdinamas naujos "
+#~ "eilutÄ—s\n"
+#~ "    simbolis pabaigoje."
+
+#~ msgid ""
+#~ "Read ARGs as input to the shell and execute the resulting command(s)."
+#~ msgstr "Skaityti ARGUMENTUS kaip aplinkos komandas ir jas vykdyti."
+
+#~ msgid "Logout of a login shell."
+#~ msgstr "Atsijungti nuo prisijungimo aplinkos (login shell)."
+
+#~ msgid ""
+#~ "Causes a function to exit with the return value specified by N.  If N\n"
+#~ "    is omitted, the return status is that of the last command."
+#~ msgstr ""
+#~ "Išeina iš funkcijos, grąžinama reikšmė N.  Jei N nenurodyta,\n"
+#~ "    grąžinama paskutinės vykdytos komandos reikšmė."
+
+#~ msgid ""
+#~ "For each NAME, remove the corresponding variable or function.  Given\n"
+#~ "    the `-v', unset will only act on variables.  Given the `-f' flag,\n"
+#~ "    unset will only act on functions.  With neither flag, unset first\n"
+#~ "    tries to unset a variable, and if that fails, then tries to unset a\n"
+#~ "    function.  Some variables cannot be unset; also see readonly."
+#~ msgstr ""
+#~ "Kiekvienam PAVADINIMUi, pašalinti atitinkamą kintamąjį ar funkciją.\n"
+#~ "    Jei nurodytas „-v“, unset veiks tik su kintamaisiais.  Jei nurodytas\n"
+#~ "    „-f“, unset veiks tik su funkcijomis.  Jei nenurodytas nei vienas iš\n"
+#~ "    šių parametrų, unset pirmiausiai bandys pašalinti kintamąjį, ir jei\n"
+#~ "    tai nepasiseks, bandys pašalinti funkciją.  Kai kurie kintamieji "
+#~ "negali\n"
+#~ "    būti pašalinti; žr. „readonly“."
+
+#~ msgid ""
+#~ "Suspend the execution of this shell until it receives a SIGCONT\n"
+#~ "    signal.  The `-f' if specified says not to complain about this\n"
+#~ "    being a login shell if it is; just suspend anyway."
+#~ msgstr ""
+#~ "Sustabdyti Å¡ios aplinkos darbÄ…, kol bus gautas SIGCONT\n"
+#~ "    signalas.  Jei nurodyta „-f“, nesiskųsti, jei ši aplinka yra "
+#~ "prisijungimo\n"
+#~ "    aplinka (login shell) ir sustabdyti jÄ… bet kuriuo atveju."
+
+#~ msgid ""
+#~ "Create a simple command invoked by NAME which runs COMMANDS.\n"
+#~ "    Arguments on the command line along with NAME are passed to the\n"
+#~ "    function as $0 .. $n."
+#~ msgstr ""
+#~ "Sukurti paprastą komandą, iškvie�iamą PAVADINIMU, vykdan�ią KOMANDAS.\n"
+#~ "    Argumentai komandų eilutėje kartu su PAVADINIMU perduodami funkcijai\n"
+#~ "    kaip $0 .. $n."
+
+#~ msgid ""
+#~ "For each NAME, specify how arguments are to be completed.\n"
+#~ "    If the -p option is supplied, or if no options are supplied, "
+#~ "existing\n"
+#~ "    completion specifications are printed in a way that allows them to "
+#~ "be\n"
+#~ "    reused as input.  The -r option removes a completion specification "
+#~ "for\n"
+#~ "    each NAME, or, if no NAMEs are supplied, all completion "
+#~ "specifications."
+#~ msgstr ""
+#~ "Kiekvienam VARDUI nurodyti, kaip argumentai turėtų būti užbaigti.\n"
+#~ "    Jei pateiktas -p nustatymas arba nepateikta jokių nustatymų,\n"
+#~ "    spausdinamos esamos užbaigimo specifikacijos tokiu formatu, kad\n"
+#~ "    jas būtų galima panaudoti kaip įvestį.  Nustatymas -r pašalina\n"
+#~ "    užbaigimo specifikaciją kiekvienam VARDUI, arba, jei nenurodyta\n"
+#~ "    VARDO, visas užbaigimo specifikacijas."
diff --git a/po/nb.gmo b/po/nb.gmo
new file mode 100644
index 0000000..894af69
--- /dev/null
+++ b/po/nb.gmo
diff --git a/po/nb.po b/po/nb.po
new file mode 100644
index 0000000..cdeff4d
--- /dev/null
+++ b/po/nb.po
@@ -0,0 +1,5867 @@
+# Norwegian (bokmål) translation of GNU Bash
+# Copyright (C) 2019 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+# Ã…ka Sikrom <a4@hush.com>, 2015-2019.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: bash-5.0\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2019-01-08 19:40+0100\n"
+"Last-Translator: Ã…ka Sikrom <a4@hush.com>\n"
+"Language-Team: Norwegian Bokmaal <i18n-nb@lister.ping.uio.no>\n"
+"Language: nb\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"X-Generator: Poedit 2.0.6\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "feil i tabell-underskript"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr "%s: fjerner navnref-egenskap"
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: indeksert tabell kan ikke konverteres til assosiativ tabell"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: ugyldig nøkkel for assosiativ tabell"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: kan ikke tildeles ikke-numerisk indeks"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr "%s: %s: underskript må brukes ved tildeling av assosiative tabeller"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: klarte ikke å opprette: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr "bash_execute_unix_command: fant ikke tastaturoppsett for kommando"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: første ikke-blanktegn må være «\"»"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "avsluttende «%c» mangler i %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: kolon-skilletegn mangler"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "«%s»: klarte ikke å fjerne tildeling"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr "brace-utvidelse: klarte ikke å tildele minne for %s"
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr "brace-utvidelse: klarte ikke å tildele minne for %u elementer"
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr "brace-utvidelse: klarte ikke å tildele minne for «%s»"
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "«%s»: ugyldig alias"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "linjeredigering er ikke slått på"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "«%s»: ugyldig navn på tastaturoppsett"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: klarte ikke å lese: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "«%s»: ukjent funksjonsnavn"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s er ikke tilknyttet en knapp.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s kan startes via"
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "«%s»: klarte ikke å fjerne tildeling"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "antall sløyfer"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "gir bare mening i «for»-, «while»- og «until»-sløyfer"
+
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Vis konteksten for gjeldende underrutine-kall.\n"
+"    \n"
+"    Hvis UTTRykk ikke er valgt, vises «$line $filename».  Med UTTRykk vises\n"
+"    «$line $subroutine $filename». Denne ekstrainformasjonen kan brukes\n"
+"    til stabelsporing.\n"
+"    \n"
+"    Verdien av UTTRykk viser hvor mange kall-rammer programmet skal bevege "
+"seg\n"
+"    gjennom tilbake fra gjeldende ramme. Øverste ramme er 0.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Status er 0, med mindre skallet ikke kjører en skallfunksjon eller\n"
+"    valgt UTTRykk er ugyldig."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "HOME har ingen verdi"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "for mange argumenter"
+
+#: builtins/cd.def:342
+msgid "null directory"
+msgstr "null-mappe"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "OLDPWD har ingen verdi"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "linje %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "advarsel:"
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: bruk: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: valget krever et argument"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: valget krever et tall-argument"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "fant ikke %s"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: ugyldig valg"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: ugyldig valgnavn"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "«%s»: ugyldig navn"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "ugyldig oktal-tall"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "ugldig heksadesimalt tall"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "ugyldig tall"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: ugyldig signalspesifikasjon"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "«%s» er hverken hverken et PID eller en gyldig jobbspesifikasjon"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: skrivebeskyttet variabel"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s er utenfor rekkevidde"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "argument"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s er utenfor rekkevidde"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: jobben finnes ikke"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: ingen jobbkontroll"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "ingen jobbkontroll"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: begrenset"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "begrenset"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: ikke innebygd i skall"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "skrivefeil: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "feil under endring av terminal-egenskaper: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "feil under henting av terminal-egenskaper: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: feil under henting av gjeldende mappe: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: flertydig jobbspesifikasjon"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr "hjelp er ikke tilgjengelig for denne versjonen"
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: klarte ikke å fjerne verdi fra skrivebeskyttet %s"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: klarte ikke å fjerne verdi"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: ugyldig handlingsnavn"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: ingen spesifikasjon for fullføring"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "advarsel: valget «-F» virker kanskje ikke slik du forventer"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "advarsel: valget «-C» virker kanskje ikke slik du forventer"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "fullføringsfunksjon kjøres ikke nå"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "kan bare brukes i funksjoner"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr "%s: referansevariabler kan ikke være tabeller (arrays)"
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr "%s: navnref.-variabler kan ikke referere til seg selv"
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s: sirkulær navnreferanse"
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "«%s»: ugyldig variabelnavn for navnreferanse"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "valget«-f» kan ikke brukes til å lage funksjoner"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: skrivebeskyttet funksjon"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr "%s: sammensatt tabell-tideling i hermetegn er utgått"
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: tabellvariabler kan ikke ødelegges på denne måten"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: assosiative tabeller kan ikke konverteres til indekserte tabeller"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "dynamisk innlasting er ikke tilgjengelig"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "klarte ikke å åpne delt objekt %s: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "fant ikke %s i delt objekt %s: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: ikke dynamisk innlastet"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr "innlastingsfunksjon for %s førte til feilkode (%d). Ikke lastet inn"
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: ikke dynamisk innlastet"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: klarte ikke å slette: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: er en mappe"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: ikke en vanlig fil"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: fila er for stor"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: klarte ikke å kjøre binærfil"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: klarte ikke å kjøre: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "logg ut\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "ikke innloggingsskall. Bruk «exit»"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Bakgrunnsjobb(er) venter.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Bakgrunnsjobb(er) kjører.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "fant ingen kommando"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "historikk-spesifikasjon"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: klarte ikke å åpne midlertidig fil: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "gjeldende"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "jobb %d startet uten jobbkontroll"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: -- %c er et ugyldig valg\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: -- %c krever et argument\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "nøkkelsummering er slått av"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: kontrollsum-tabell er tom\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "treff\tkommando\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Skallkommandoer som samsvarer med nøkkelordet `"
+msgstr[1] "Skallkommandoer som samsvarer med nøkkelordene `"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"ingen hjelpeemner samsvarer med «%s».  Prøv «help help», «man -k %s» eller "
+"«info %s»."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: klarte ikke å åpne: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Disse skallkommandoene er internt definert. Skriv «help» for å se denne "
+"lista.\n"
+"Skriv «help name» for å finne ut mer om funksjonen «name».\n"
+"Bruk «info bash» for å finne generell info om skallet.\n"
+"Bruk «man -k» eller «info» for å finne ut mer om kommandoer som ikke er på "
+"denne lista.\n"
+"\n"
+"Stjerne (*) ved siden av et kommandonavn betyr at gjeldende kommando er "
+"slått av.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "du kan ikke bruke flere enn ett av valgene -anrw på én gang"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "historikkposisjon"
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: ugyldig tidsstempel"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: historikk-utvidelse mislyktes"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: inlib mislyktes"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "valget «-x» kan ikke brukes i kombinasjon med andre valg"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: argumenter må være prosess- eller jobb-ID-er"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Ukjent feil"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "forventet uttrykk"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: ikke en indeksert tabell"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: ugyldig spesifikasjon av fildeskriptor"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: ugyldig fildeskriptor: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: ugyldig linjeantall"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: ugyldig tabellopphav"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: ugyldig tilbakekallsmengde"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "tomt navn på tabellvariabel"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "støtte for tabellvariabler kreves"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "«%s»: formattegn mangler"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "«%c»: ugyldig spesifikasjon av tidsformat"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "«%c»: ugyldig formattegn"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "advarsel: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "problem med tolkning av format: %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "heks-siffer mangler for \\x"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "unicode-siffer mangler for  \\%c"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "ingen annen mappe"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s: ugyldig argument"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<ingen gjeldende mappe>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "mappestabel er tom"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "mappestabel-indeks"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Vis liste over mapper som blir husket. Mapper\n"
+"    havner på denne lista med kommandoen «pushd». Du kan gå\n"
+"    tilbake i lista med kommandoen «popd».\n"
+"    \n"
+"    Valg:\n"
+"      -c\ttøm mappestabel ved å slette alle elementer\n"
+"      -l\tikke legg til tildeprefiks på stier som er relative\n"
+"    \ttil gjeldende hjemmemappe\n"
+"      -p\tskriv ut mappetsabel med ett element per linje\n"
+"      -v\tskriv ut mappestabel med ett element per linje som har\n"
+"    \tstabelposisjon som prefiks\n"
+"    \n"
+"    Argumenter:\n"
+"      +N\tVis N-te mappe talt fra null\n"
+"    \tpå venstre side av lista (gjelder når programmet kjøres uten valg).\n"
+"    \n"
+"      -N\tVis N-te  mappe talt fra null\n"
+"\tpå høyre side av lista (gjelder når programmet kjøres uten valg)."
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Legger til en mappe i toppen av mappestabelen, eller rullerer\n"
+"    stabelen slik at øverste mappe blir gjeldende arbeidsmappe.\n"
+"    Hvis ingen argumenter er valgt, bytter de to øverste mappene plass.\n"
+"    \n"
+"    Valg:\n"
+"      -n\tLar være å bytte mappe når mapper legges til i stabelen,\n"
+"    \tslik at kun selve stabelen blir endret.\n"
+"    \n"
+"    Argumenter:\n"
+"      +N\tRullerer stabelen slik at N-te mappe - talt fra\n"
+"    \tnull til venstre i lista etter «dirs» - havner øverst.\n"
+"    \n"
+"      -N\tRullerer stabelen slik at N-te mappe - talt fra\n"
+"    \tnull til høyre i lista etter «dirs» - havner øverst\n"
+"    \n"
+"      dir\tLegger til DIR i toppen av mappestabelen, og tar den\n"
+"    \ti bruk som gjeldende arbeidsmappe.\n"
+"    \n"
+"    Den innebygde funksjonen «dirs» viser mappestabelen."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Fjerner mapper fra mappestabelen. Hvis ingen argumenter brukes,\n"
+"    fjerner programmet øverste mappe fra stabelen og bytter til det som "
+"deretter er øverste mappe.\n"
+"    \n"
+"    Valg:\n"
+"      -n\tLar være å bytte mappe når mapper fjernes fra stabelen,\n"
+"    \tslik at bare stabelen blir endret.\n"
+"    \n"
+"    Argumenter:\n"
+"      +N\tFjerner N-te oppføring - talt fra null til venstre i lista\n"
+"    \tetter «dirs». For eksempel fjerner «popd +0»\n"
+"    \tførste mappe, og «popd +1» den andre.\n"
+"    \n"
+"      -N\tFjerner N-te oppføring - talt fra null til høyre i lista\n"
+"    \tetter «dirs». For eksempel fjerner «popd -0»\n"
+"    \tsiste mappe, og «popd -1» den nest siste.\n"
+"    \n"
+"    Den innebygde funksjonen «dirs» viser mappestabelen."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: ugyldig spesifikasjon av tidsavbrudd"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "lesefeil: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr "du kan bare «return» fra en funksjon eller kildeskript"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr ""
+"du kan ikke utføre «unset» (tømme både en funksjon og en variabel for "
+"verdier) samtidig"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: ikke en tabellvariabel"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: ikke en funksjon"
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr "%s: klarte ikke å eksportere"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "shift-antall"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "du kan ikke både definere og fjerne skallvalg samtidig"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: ugyldig navn på skallvalg"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "filnavn-argument kreves"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: fant ikke fil"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "klarte ikke å sette i hvilemodus"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "klarte ikke å sette et innloggingsskall i hvilemodus"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s har alias «%s»\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s er et skall-nøkkelord\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s er en funksjon\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s er en innebygd skallkommando\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s er en innebygget skallfunksjon\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s er %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s er nøkkelsummert («hashed») (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: ugyldig grenseargument"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "«%c»: ugyldig kommando"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: klarte ikke å hente grense: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "grense"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: klarte ikke å endre grense: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "oktalt tall"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "«%c»: ugyldig symbolsk modus-operatør"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "«%c»: ugyldig symbolsk modustegn"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " linje "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "forrige kommando: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Abryter …"
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr "INFORM: "
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "ukjent kommandofeil"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "ugyldig kommandotype"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "ugyldig tilkobling"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "ugyldig hopp"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: utildelt variabel"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\atidsavbrudd for inndata: auto-utlogging\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "klarte ikke å videresende standard inndata fra «/dev/null». %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "TIMEFORMAT: «%c» er et ugyldig formattegn"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr "execute_coproc: coproc [%d:%s] finnes fremdeles"
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "datarør-feil"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr "eval: grensa for nivåer av eval-funksjoner (%d) er overskredet"
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr "%s: grensa for nivåer av kilder i kilder (%d) er overskredet"
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr "%s: grensa for nivåer av funksjoner i funksjoner (%d) er overskredet"
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: ikke tillatt: kommandonavn kan ikke inneholde «/»"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "fant ikke kommando %s"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: ugyldig tolk"
+
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: klarte ikke å kjøre binærfil: %s"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "«%s» er en innebygd spesialfunksjon"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "klarte ikke å duplisere fd %d til fd %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "grensa for rekursjonsnivåer i uttrykk er overskredet"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "rekursjonsstabelen er tom"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "uttrykk inneholder syntaksfeil"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "du forsøkte å tilordne en verdi til noe som ikke er en variabel"
+
+#: expr.c:530
+msgid "syntax error in variable assignment"
+msgstr "variabeltildeling inneholder syntaksfeil"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "forsøkte å dele på 0"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "programfeil: ugyldig expassign-symbol"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "forventet «:» for betinget uttrykk"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "eksponent er lavere enn 0"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "forventet identifikator etter pre-økning eller pre-forminskelse"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "mangler «)»"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "syntaksfeil: forventet operand"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "syntaksfeil: ugyldig aritmetisk operatør"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (feilaktig symbol er «%s»)"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "ugyldig aritmetisk grunntall"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: ugyldig linjeantall"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "verdien er for høy for grunntallet"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: feil i uttrykk\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: fikk ikke tilgang til foreldermapper"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "klarte ikke å tilbakestille nodelay-modus for fd %d"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr "klarte ikke å knytte ny fildeskriptor til bash-inndata fra fd %d"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input: mellomlager for ny fd %d finnes allerede"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: pgrp-datarør"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "kopiert pid %d finnes i kjørende jobb %d"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "sletter ventende bakgrunnsjobb %d med prosessgruppe %ld"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process: markert PID %5ld (%s) som levende"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: pid-en finnes ikke"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Signal %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Ferdig"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Venter"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Venter(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "Kjører"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Ferdig(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Avsluttet %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Ukjent status"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(kjerne lagret i fil) "
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (wd: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "underprosess setpgid (%ld til %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: pid %ld er ikke en underprosess av dette skallet"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: Ingen kjennskap til prosess %ld"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: prosess %d venter"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: jobben finnes ikke"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: jobben er avsluttet"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: jobb %d kjører allerede i bakgrunnen"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr "waitchld: slår på WNOHANG for å unngå kronisk blokkering"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: linje %d: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (kjerne lagret i fil)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(wd nå: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: getpgrp mislyktes"
+
+#: jobs.c:4447
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: ingen jobbkontroll i bakgrunn"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: linjeregler"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "klarte ikke å velge terminal-prosessgruppe (%d)"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "ingen jobbkontroll i dette skallet"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: mislykket premiss: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d: urimelig premiss\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "ukjent"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: rotete blokk på befrielsesliste"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: ble bedt om å behandle blokk som allerede er ledig"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: ble bedt om å behandle blokk som ikke er tildelt"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: tomt. mh_nbytes er utenfor rekkevidde"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: tomt. mh_nbytes er utenfor rekkevidde"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: start- og sluttdel er av ulik størrelse"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: ble bedt om å behandle blokk som ikke er tildelt"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc: tomt. mh_nbytes er utenfor rekkevidde"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc: tomt. mh_nbytes er utenfor rekkevidde"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: start- og sluttdel er av ulik størrelse"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: tildelingstabell er full med FIND_ALLOC?\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: finnes %p allerede i tabellen som tildelt?\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: finnes %p allerede i tabellen som ledig?\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "ugyldig grunntall"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: ukjent vert"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: ugyldig tjeneste"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: ugyldig spesifikasjon av nettverkssti"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "nettverkshandlinger støttes ikke"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: klarte ikke å bytte region (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: klarte ikke å bytte region (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: klarte ikke å bytte region (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: klarte ikke å bytte region (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "Du har e-post i $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "Du har ny e-post i $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "Posten i %s er lest\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "syntaksfeil: aritmetisk uttrykk kreves"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "syntaksfeil: uforventet «;»"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "syntaksfeil: «((%s))»"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: %d er en ugyldig instrukstype"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr "here-dokument ved linje %d adskilt av slutt på fil (forventet «%s»)"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr ""
+"make_redirection: videresendinginstruks «%d» er utenfor tillatt rekkevidde"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+"shell_getc: «shell_input_line_size» (%zu) overskrider SIZE_MAX (%lu): linja "
+"er forkortet"
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr "grensa for maksimalt antall here-dokumenter er overskredet"
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "uforventet slutt på fil (EOF) under søk etter «%c»"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "uforventet slutt på fil (EOF) under søk etter «]]»"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "syntaksfeil i betinget uttrykk: forventet ikke symbolet «%s»"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "syntaksfeil i betinget uttrykk"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "forventet ikke symbolet «%s», men «)»"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "forventet «)»"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "«%s» er et uforventet argument for betinget unær operatør"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "uforventet argument for betinget unær operatør"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "«%s» er et uforventet symbol. Forventet betinget binær operatør"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "forventet betinget binæroperatør"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "«%s» er et uforventet argument for betinget binæroperatør"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "uforventet argument for betinget binæroperatør"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "«%c» er et uforventet symbol i en betinget kommando"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "«%s» er et uforventet symbol i en betinget kommando"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "«%d» er et uforventet symbol i en betinget kommando"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "syntaksfeil ved «%s», som er et uforventet symbol"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "syntaksfeil ved «%s»"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "syntaksfeil: uforventet slutt på fil"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "syntaksfeil"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Bruk «%s» for å gå ut av skallet.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "uforventet slutt på fil (EOF) under søk etter «)»"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "fullføring: fant ikke funksjonen «%s»"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr "programmable_completion: %s: mulig løkke av nye forsøk"
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: NULL COMPSPEC"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: «%d» er en ugyldig tilkobling"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: ugyldig fildeskriptor"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: filpeker er NULL"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != fileno xtrace fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: «%c»: ugyldig formattegn"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "fildeskriptor er utenfor tillatt rekkevidde"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: flertydig videresending"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: klarte ikke å overskrive fil"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: ikke tillatt: klarte ikke å videresende utdata"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "klarte ikke å lage midlertidig fil for here-dokument: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: klarte ikke å knytte fd til variabel"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "/dev/(tcp|udp)/host/port støttes ikke uten nettverkstilkobling"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "videresendingsfeil: klarte ikke å duplisere fd"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "fant ikke «/tmp». Opprett denne mappa!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "«/tmp» må være et gyldig mappenavn"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr "pen utskriftsmodus blir ignorert i interaktive skall"
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: ugyldig valg"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "klarte ikke å velge %d som uid. Effektiv uid: %d"
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "klarte ikke å velge %d som gid. Effektiv gid: %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr "klarte ikke å starte feilsøkingsverktøy. Feilsøkingsmodus slått av"
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr "%s: er en mappe"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "Jeg manger navn!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, versjon %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Bruk:\t%s [langt GNU-valg] [valg] …\n"
+"\t%s [langt GNU-valg] [valg] skriptfil …\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "Lange GNU-valg:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Skallvalg:\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr ""
+"\t«-ilrsD»,  «-c kommando» eller «-O kortvalg_valg»\t\t(kun programkall)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t«-%s» eller «-o»\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr "Skriv «%s -c \"help set\"» for mer informasjon om skallvalg.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr "Skriv «%s -c help» for mer informasjon om innebygde skallkommandoer.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "Bruk kommandoen «bashbug» for å rapportere programfeil.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr "bash-nettside: <http://www.gnu.org/software/bash>\n"
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr ""
+"Generell hjelp til bruk av GNU-programvare: <http://www.gnu.org/gethelp/>\n"
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: ugyldig handling"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Ugyldig signal"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Legg på"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Forstyrr"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Avslutt"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Ugyldig instruks"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "BPT-sporing/-fanging"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "ABORT-instruks"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "EMT-instruks"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Flyttallsfeil"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Drept"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Bussfeil"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Segmenteringsfeil"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Ugyldig systemkall"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Ødelagt datarør"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Alarmklokke"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Avsluttet"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Hastende IO-tilstand"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Stoppet (signal)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Fortsett"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Død eller stans av underprosess"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Stoppet (tty-inndata)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Stoppet (tty-utdata)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "I/O klar"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "CPU-grense"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "Filgrense"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Alarm (virtuell)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Alarm (profil)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Vindu endret"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Husk lås"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Brukersignal 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Brukersignal 2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "HFT-inndata venter"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "strømstans er nærliggende"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "systemkræsj er nærliggende"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "flytt prosess til annen CPU"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "programmeringsfeil"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "HFT-skjermmodus tildelt"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "HFT-skjermmodus tilbaketrukket"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "HFT-lydsekvens er fullført"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "Informasjonsforespørsel"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "#%d er et ukjent signal"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "ugyldig substitutt: %2$s mangler avsluttende «%1$s»"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: klarte ikke å knytte liste til tabellmedlem"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "klarte ikke å lage datarør for substitusjon av prosess"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "klarte ikke å lage underprosess for substitusjon av prosess"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "klarte ikke å åpne navngitt datarør %s for lesing"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "klarte ikke å åpne navngitt datarør %s for skriving"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "klarte ikke å duplisere navngitt datarør %s som fd %d"
+
+#: subst.c:6213
+msgid "command substitution: ignored null byte in input"
+msgstr "kommandosubstitusjon: null-byte i inndata ignorert"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "klarte ikke å lage datarør for substitusjon av kommando"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "klarte ikke å lage underprosess for substitusjon av kommando"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute: klarte ikke å duplisere datarør som fd 1"
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: ugyldig variabelnavn for navnreferanse"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: ugyldig indirekte utvidelse"
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr "%s: ugyldig variabelnavn"
+
+#: subst.c:7256
+#, c-format
+msgid "%s: parameter not set"
+msgstr "%s: parameter har ingen verdi"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: parameter har null-verdi eller står tomt"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: understreng-uttrykk < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: ugyldig substitusjon"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: du kan ikke tildele på denne måten"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+"fremtidige versjoner av skallet skal tvinge evaluering som en aritmetisk "
+"substitusjon"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "ugyldig substitusjon. %s mangler avsluttende «`»"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "ingen treff på %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "forventet argument"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: forventet heltallsuttrykk"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "forventet «)»"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "forventet «)», men fant %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: forventet binær operatør"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: forventet unær operatør"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "«]» mangler"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "syntaksfeil: uforventet «;»"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "ugyldig signalnummer"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr ""
+"fellehåndtering: øvre grense for fellehåndteringsnivå (%d) er overskredet"
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: ugyldig verdi i «trap_list[%d]»: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps: SIG_DFL er signalbehandler. Sender %d (%s) til meg selv "
+"på nytt"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: %d er et ugyldig signal"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "feil under importering av definisjonen av funksjonen «%s»"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "skallnivået (%d) er for høyt. Tilbakestiller til 1"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: ingen funksjonskontekst i gjeldende virkefelt"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: variabel kan ikke tilknyttes verdi"
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr "%s: knytter heltall til navnreferanse"
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: ingen funksjonskontekst i gjeldende virkefelt"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s har exportstr som er null"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "%d er et ugyldig tegn i exportstr for %s"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "exportstr for %s mangler «=»"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr ""
+"pop_var_context: toppen av «shell_variables» er ikke en funksjonskontekst"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: kontekst for «global_variables» mangler"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr ""
+"pop_scope: toppen av «shell_variables» er ikke et midlertidig miljøfelt"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: klarte ikke å åpne som FIL"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: ugyldig verdi for sporing av fildeskriptor"
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s: samspill-verdi er utenfor tillatt rekkevidde"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Opphavsrett (C) 2012 Free Software Foundation, Inc."
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"Lisens GPLv3+: GNU GPL versjon 3 eller nyere <http://gnu.org/licenses/gpl."
+"html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, versjon %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr ""
+"Dette er fri programvare. Du står fritt til å endre og dele den videre."
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr ""
+"Det stilles INGEN GARANTI, i den grad dette tillates av gjeldende lovverk."
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: klarte ikke å tildele %lu byte (%lu byte tildelt)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: klarte ikke å tildele %lu byte"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: klarte ikke å tildele %lu byte (%lu byte tildelt)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: klarte ikke å tildele %lu byte"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [navn[=verdi] … ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] navn [navn …]"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpsvPSVX] [-m tastaturoppsett] [-f filnavn] [-q navn] [-u navn] [-r "
+"knappesekv] [-x knappesekv:skallkommando] [knappesekv:readline-funksjon "
+"eller readline-kommando]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [innebygd-skallfunksjon [arg …]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [uttr]"
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]] [-@]] [mappe]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] command [arg …]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilnrtux] [-p] [navn[=verdi] …]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilnrtux] [-p] navn[=verdi] …"
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [valg] navn[=verdi] …"
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [arg …]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [arg …]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f filnavn] [navn …]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [arg …]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts valgstreng navn [arg]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a navn] [kommando [argumenter …]] [videresending …]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr "fc [-e enavn] [-lnr] [første] [siste] eller fc -s [pat=rep] [kommando]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [jobbspes]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [jobbspes …]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p stinavn] [-dt] [navn …]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [mønster …]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d posisjon] [n] eller history -anrw [filnavn] eller history -"
+"ps arg [arg …]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [jobbspes …] eller jobs -x kommando [arg]"
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [jobbspes … | pid …]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s sigspes | -n signum | -sigspes] pid | jobbspes … eller kill -l "
+"[sigspes]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let arg [arg …]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a tabell] [-d adskill] [-i tekst] [-n ntegn] [-N ntegn] [-p "
+"ledetekst] [-t tidsavbrudd] [-u fd] [navn …]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o valgnavn] [--] [arg …]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [navn …]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [navn[=verdi] …] eller export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [navn[=verdi] …] eller readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source filnavn [argumenter]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". filnavn [argumenter]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [uttr]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ arg … ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[arg] signalspes …]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] navn [navn …]"
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [grense]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [modus]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-fn] [id …]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [pid …]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for NAVN [in ORD … ] ; do KOMMANDOER; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( uttr1; uttr2; uttr3 )); do KOMMANDOER; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select NAVN [in ORD … ;] do KOMMANDOER; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] kommandokø"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case ORD in [MØNSTER [| MØNSTER] …) KOMMANDOER ;;] … esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if KOMMANDOER; then KOMMANDOER; [ elif KOMMANDOER; then KOMMANDOER; ] … "
+"[ else KOMMANDOER; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while KOMMANDOER; do KOMMANDOER; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until KOMMANDOER; do KOMMANDOER; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [NAVN] kommando [videresendinger]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function navn { KOMAMNDOER ; } eller navn () { KOMMANDOER ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ KOMMANDOER ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "job_spec [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( uttrykk ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ uttrykk ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "variabler - Navn og betydninger av enkelte skallvariabler"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | mappe]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [valgnavn …]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v var] format [argumenter]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o valg] [-A handling] [-G globpat] [-"
+"W ordliste]  [-F funksjon] [-C kommando] [-X filterpat] [-P prefiks] [-S "
+"suffiks] [navn …]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o valg] [-A handling] [-G globpat] [-W ordliste]  "
+"[-F funksjon] [-C kommando] [-X filtersti] [-P prefiks] [-S suffiks] [ord]"
+
+#: builtins.c:239
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o valg] [-DEI] [navn …]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-d skilletegn] [-n antall] [-O opphav] [-s antall] [-t] [-u fd] [-C "
+"tilbakekall] [-c mengde] [tabell]"
+
+#: builtins.c:244
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-d skilletegn] [-n antall] [-O opphav] [-s antall] [-t] [-u fd] [-"
+"C tilbakekall] [-c mengde] [tabell]"
+
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Definer eller vis alias.\n"
+"    \n"
+"    Hvis ingen argumenter er gitt, skriver programmet ut en liste over\n"
+"    gjeldende alias i form av «alias NAVN=verdi» til standardutdata.\n"
+"    \n"
+"    Ellers defineres et alias per NAVN med en VERDI.\n"
+"    Avsluttende mellomrom i VERDI fører til at neste ord kontrolleres for\n"
+"    alias-substitusjon når aliaset utvides.\n"
+"    \n"
+"    Valg:\n"
+"      -p\tSkriv ut alle definerte alias i brukbart format\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    alias avslutter med positiv verdi («true»), med mindre bruker skriver "
+"inn et NAVN\n"
+"    som mangler definert alias."
+
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Fjern hvert NAVN fra lista over definerte alias.\n"
+"    \n"
+"    Valg:\n"
+"      -a\tfjern alle alias-definisjoner.\n"
+"    \n"
+"    Programmet avslutter som vellykket med mindre bruker velger et aliasNAVN "
+"som ikke finnes."
+
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"Velg hurtigtaster og variabler for Readline.\n"
+"    \n"
+"    Knytt en knappekombinasjon til en Readline-funksjon eller makro, eller "
+"gi\n"
+"    verdi til en Readline-variabel. Argumentsyntaksen tilsvarer det som "
+"finnes\n"
+"    i «~/.inputrc», men må oppgis som ett argument.\n"
+"    F.eks.: bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Valg:\n"
+"      -m  OPPSETT         Bruk valgt tastaturOPPSETT under kjøring av denne "
+"kommandoen.\n"
+"                         Gyldige oppsettsnavn er «emacs», «emacs-standard»,\n"
+"                         «emacs-meta», «emacs-ctlx», «vi», «vi-move»,\n"
+"                         «vi-command» og «vi-insert».\n"
+"      -l                 Vis funksjonsnavn.\n"
+"      -P                 Vis funksjonsnavn og tildelinger.\n"
+"      -p                 Vis funksjoner og tildelinger i et format som kan "
+"gjenbrukes\n"
+"                         som inndata.\n"
+"      -S                 Vis knappekombinasjoner som kaller makroer og "
+"tilhørende verdier\n"
+"      -s                 Tilsvarer «-S», men i et format som kan gjenbrukes "
+"i inndata.\n"
+"      -V                 Vis variabelnavn og verdier\n"
+"      -v                 Tilsvarer «-V», men i et format som kan gjenbrukes "
+"i inndata.\n"
+"      -q  function-name  Spør hvilke knapper som kaller aktuell funksjon.\n"
+"      -u  function-name  Fjern alle knappekombinasjoner som er tilknyttet "
+"aktuell funksjon.\n"
+"      -r  KOMB         Fjern tildeling av valgt knappeKOMBinasjon.\n"
+"      -f  FILNAVN       Les knappekombinasjoner fra FILNAVN.\n"
+"      -x  KOMB:KOMMANDO\tGjør slik at valgt skallKOMMANDO kjøres når\n"
+"    \t\t\t\tvalgt knappeKOMBinasjon trykkes.\n"
+"      -X                 Vis knappekombinasjoner som er tildelt med «-x», og "
+"aktuelle kommandoer \n"
+"                         i et format som kan gjenbrukes i inndata.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    bind avslutter med 0, med mindre bruker tar et ukjent valg eller det "
+"oppstår feil."
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Gå ut av en «FOR»-, «WHILE»- eller «UNTIL»-løkke.\n"
+"    \n"
+"    Hvis N er valgt, brytes N antall underløkker.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Statuskoden er 0, med mindre N er mindre enn 1."
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Fortsett neste runde av gjeldende FOR-, WHILE- eller WHILE-løkke..\n"
+"    \n"
+"    Hvis N er valgt, fortsetter N-te løkke.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Statuskoden er 0, med mindre N er mindre enn 1."
+
+#: builtins.c:354
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Kjør innebygde skallfunksjoner.\n"
+"    \n"
+"    Kjør SKALLFUNKSJON med valgte ARGumenter uten å slå opp\n"
+"    kommandonavn. Dette er nyttig når du vil re-implementere en innebygd\n"
+"    skallkommando som en funksjon, samtidig som du kjører den innenfor en "
+"skallfunksjon.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Statuskoden er den samme som aktuell SKALLFUNKSJON gir, eller\n"
+"    negativ («false») hvis SKALLFUNKSJON ikke er en innebygd skallkommando."
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Vis konteksten for gjeldende underrutine-kall.\n"
+"    \n"
+"    Hvis UTTRykk ikke er valgt, vises «$line $filename».  Med UTTRykk vises\n"
+"    «$line $subroutine $filename». Denne ekstrainformasjonen kan brukes\n"
+"    til stabelsporing.\n"
+"    \n"
+"    Verdien av UTTRykk viser hvor mange kall-rammer programmet skal bevege "
+"seg\n"
+"    gjennom tilbake fra gjeldende ramme. Øverste ramme er 0.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Status er 0, med mindre skallet ikke kjører en skallfunksjon eller\n"
+"    valgt UTTRykk er ugyldig."
+
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"Bytt arbeidsmappe for skallet.\n"
+"    \n"
+"    Bytt gjeldende mappe til MAP. Standard MAPpe er verdien av\n"
+"    skallvariabelen HOME.\n"
+"    \n"
+"    Variabelen CDPATH bestemmer søkestien for mapper som inneholder\n"
+"    MAP. Alternative mappenavn i CDPATH er adskilt med «:».\n"
+"    Et null-mappenavn er det samme som gjeldende mappe. Hvis MAP begynner\n"
+"    med skråstrek (/), brukes ikke CDPATH.\n"
+"    \n"
+"    Hvis valgt mappe ikke finnes, og skallvalget «cdable_vars» har en "
+"verdi,\n"
+"    antas ordet å være et variabelnavn. Hvis den variabelen har en verdi,\n"
+"    brukes denne verdien som MAP.\n"
+"    \n"
+"    Valg:\n"
+"        -L\ttving følging av symbolske lenker. Følg symbolske lenker i\n"
+"    \tMAP etter å ha behandlet forekomster av «..»\n"
+"        -P\tbruk fysisk mappestruktur uten å følge symbolske\n"
+"    \tlenker. Følg lenker i MAP før forekomster av «..» behandles.\n"
+"        -e\thvis «-P» er valgt, og det er uklart hva som er gjeldende\n"
+"    \tarbeidsmappe, avslutt med en annen status enn 0\n"
+"        -@  hvis systemet støtter det, vis en fil med utvidede attributter\n"
+"            som en mappe med attributtene som innhold\n"
+"    \n"
+"    Standard for symbolske lenker er at de følges, som om «-L» er valgt.\n"
+"    «..» behandles ved at den nå tidligere stinavn-komponenten fjernes\n"
+"    én skråstrek tilbake eller til begynnelsen av MAP.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Status er 0 hvis skallet har byttet mappe, og hvis $PWD er valgt uten "
+"problemer\n"
+"    ved bruk av «-P». Ellers er status noe annet enn 0."
+
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"Skriv ut navn på gjeldende arbeidsmappe.\n"
+"    \n"
+"    Valg:\n"
+"      -L\tskriv ut verdien av $PWD hvis dette er navnet på\n"
+"    \tgjeldende arbeidsmappe\n"
+"      -P\tskriv ut fysisk mappe, uten symbolske lenker\n"
+"    \n"
+"    «pwd» kjører med valget «-L» som standard.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Status er 0, med mindre bruker tar et ugyldig valg eller\n"
+"    programmet ikke klarer å lese gjeldende mappe."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Null-kommando.\n"
+"    \n"
+"    Dette har ingen effekt. Kommandoen gjør ingenting.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Alltid vellykket."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Gi et vellykket resultat.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Alltid vellykket."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Gi et mislykket resultat.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Alltid mislykket."
+
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Kjør en enkel kommando, eller vis informasjon om kommandoer.\n"
+"    \n"
+"    Kjører valgt KOMMANDO med ARG uten oppslag av skallfunksjoner, eller "
+"viser\n"
+"    informasjon om valgte KOMMANDOer. Dette kan brukes til å kalle "
+"kommandoer\n"
+"    på disk når det finens en funksjon med samme navn.\n"
+"    \n"
+"    Valg:\n"
+"      -p\tbruk en standardverdi for STI som garantert finner alle\n"
+"    \tstandardverktøyene\n"
+"      -v\tskriv ut en beskrivelse av KOMMANDO i «type»-stil\n"
+"      -V\tskriv ut en mer detaljert beskrivelse av hver KOMMANDO\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Samme som statuskoden fra KOMMANDO, eller mislykket hvis KOMMANDO ikke "
+"finnes."
+
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"Gi verdier og attributter til variabler.\n"
+"    \n"
+"    Lag variabler og gi dem attributter. Hvis ingen NAVN er valgt,\n"
+"    vises attributter og verdier av alle variabler.\n"
+"    \n"
+"    Valg:\n"
+"      -f\tbegrens handling eller visning til funksjonsnavn og definisjoner\n"
+"      -F\tbegrens visning til funksjonsnavn (linjenummer og\n"
+"    \tkildefil kommer i tillegg ved feilsøking)\n"
+"      -g\tlag globale variabler ved bruk innenfor en skallfunksjon\n"
+"    \t(ignoreres ved annen bruk)\n"
+"      -p\tvis attributter og verdi av hvert valgt NAVN\n"
+"    \n"
+"    Valg som justerer attributter:\n"
+"      -a\tgjør valgte NAVN til indekserte tabeller (hvis det støttes)\n"
+"      -A\tgjør valgte NAVN til assosiative tabeller (hvis det støttes)\n"
+"      -i\tgi valgte NAVN attributten «integer» (heltall)\n"
+"      -l\tkonverter valgte NAVN til små bokstaver\n"
+"      -n\tgjør valgt NAVN til en referanse til variabelen med egen verdi som "
+"navn\n"
+"      -r\tskrivebeskytt valgte NAVN\n"
+"      -t\tgi valgte NAVN attirbutten «trace»\n"
+"      -u\tkonverter valgte NAVN til store bokstaver\n"
+"      -x\tgjør valgte NAVN eksporterbare\n"
+"    \n"
+"    Bruk «+» i stedet for «-» for å slå av aktuell attributt.\n"
+"    \n"
+"    Variabler med heltallsattributt blir evaluert aritmetisk (se\n"
+"    kommandoen «let») når de får en verdi.\n"
+"    \n"
+"    Ved bruk innenfor funksjoner gjør «declare» valgte NAVN lokale, som med\n"
+"    kommandoen «local». Valget «-g» slår av denne oppførselen.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre bruker tar et ugyldig valg eller\n"
+"    det oppstår en variabel-tildelingsfeil."
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"Gi verdier og attributter til variabler.\n"
+"    \n"
+"    Dette er synonymt med «declare» (se «help declare»)."
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Definer lokale variabler.\n"
+"    \n"
+"    Lag en lokal variabel med valgt NAVN og VERDI. Du kan foreta\n"
+"    VALG i henhold til kommandoen «declare».\n"
+"    \n"
+"    Lokale variabler kan bare brukes innenfor en funksjon. De er kun "
+"synlige\n"
+"    for funksjonen de lages innenfor, samt underfunksjoner.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre bruker tar et ugyldig valg, det oppstår\n"
+"    en feil under variabeltildeling eller skallet ikke kjører en funksjon."
+
+#: builtins.c:557
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Skriv argumenter til standardutdata.\n"
+"    \n"
+"    Vis ARGumenter, adskilt med enkelt mellomromtegn og\n"
+"    etterfulgt av linjeskift, på standardutdata. \n"
+"    \n"
+"    Valg:\n"
+"      -n\tikke legg til linjeskift\n"
+"      -e\tslå på tolkning av skråstrek-skiftetegn\n"
+"      -E\tslå uttrykkelig av tolkning av skåstrek-skiftetegn\n"
+"    \n"
+"    «echo» tolker følgende skiftetegn:\n"
+"      \a\tsystemvarsel\n"
+"      \\b\trettetast\n"
+"      \\c\tignorer videre utdata\n"
+"      \\e\tskiftetegn\n"
+"      \\E\tskiftetegn\n"
+"      \\f\tsideskift\n"
+"      \\n\tny linje\n"
+"      \\r\tlinjeskift-tegn\n"
+"      \\t\thorisontal tabulator\n"
+"      \\v\tvertikal tabulator\n"
+"      \\\\\tomvendt skråstrek\n"
+"      \\0nnn\ttegn med ASCII-kode NNN (oktal). NNN kan bestå av\n"
+"    \t0 til 3 oktale sifre\n"
+"      \\xHH\t8-bit-tegn med verdi HH (heksadesimal). HH\n"
+"    \tkan bestå av ett eller to hex-sifre\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre det oppstår en skrivefeil."
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Skriv ut argumenter til standardutdata.\n"
+"    \n"
+"    Vis ARGumenter på standardutdata, etterfulgt av linjeskift.\n"
+"    \n"
+"    Valg:\n"
+"      -n\tikke ta med linjeskift\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre det oppstår en skrivefeil."
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"Slå på og av innebygde skallfunksjoner.\n"
+"    \n"
+"    Slår av og på innebygde skallkommandoer. Ved å slå av kan du\n"
+"    kjøre en kommando på disk med samme navnet som en skallkommando\n"
+"    uten å måtte bruke fullstendig filsti.\n"
+"    \n"
+"    Valg:\n"
+"      -a\tskriv ut en liste som viser hvilke kommandoer som er slått på\n"
+"      -n\tslå av hvert valgt NAVN, eller vis en liste over kommandoer som er "
+"slått av\n"
+"      -p\tskriv ut liste over kommandoer i et gjenbrukbart format\n"
+"      -s\tbare skriv ut navn på innebygde Posix-spesialkommandoer\n"
+"    \n"
+"    Valg for dynamisk innlasting:\n"
+"      -f\tHent NAVN fra delt objekt-FILNAVN\n"
+"      -d\tFjern en kommando som er lastet inn med -f\n"
+"    \n"
+"    Hvis du ikke tar noen valg, blir hvert NAVN slått på.\n"
+"    \n"
+"    Bruk «enable -n test» for å bruke «test» i $PATH i stedet for\n"
+"    versjonen som er innebygd i skallet.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre valgt NAVN ikke er innebygd eller det oppstår feil."
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Kjør argumenter som en skallkommando.\n"
+"    \n"
+"    Kombiner ARGumenter i én streng, bruk resultatet som inndata i skallet,\n"
+"    og kjør dette som kommando(er).\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Samme som valgt kommando, eller vellykket hvis kommando er null."
+
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"Tolk valg-argumenter.\n"
+"    \n"
+"    Getopts brukes av skallprosedyrer til å tolke posisjonsparametre\n"
+"    som valg.\n"
+"    \n"
+"    VALGSTRENG inneholder bokstaver som skal behandles som valg.\n"
+"    Hvis en bokstav etterfølges av kolon, forventer valget et argument.\n"
+"    Argumentet holdes adskilt fra valget med blanktegn.\n"
+"    \n"
+"    getopts plasserer neste valg i skallvariabelen $name hver gang det\n"
+"    kalles, laster inn navnet hvis det ikke finnes, og\n"
+"    indeks for neste argument som skal behandles i skallvariabelen OPTIND.\n"
+"    OPTIND lastes inn til 1 hver gang skallet eller et skallskript kjøres.\n"
+"    NÃ¥r et valg krever et argument plasseres argumentet i skallvariabelen "
+"OPTARG.\n"
+"    \n"
+"    getopts rapporterer feil på én av to måter. Hvis første tegn i "
+"VALGSTRENG\n"
+"    er kolon, rapporteres feil uten direkte feilmeldinger til bruker.\n"
+"    Hvis getopts ser et ugyldig valg, plasseres aktuelt valgtegn i OPTARG.\n"
+"    Hvis et obligatorisk argument ikke er gitt, legger getopts et «:» i NAVN "
+"og\n"
+"    bruker oppdaget valgtegn som OPTARG. Hvis getopts ikke er i "
+"stillemodus,\n"
+"    og ser et ugyldig valg, brukes «?» som NAVN, og OPTARG tømmes.\n"
+"    Hvis et obligatorisk argument ikke er gitt, legger getopts et «?»\n"
+"    i NAVN, tømmer OPTARG og skriver ut en feilmelding.\n"
+"    \n"
+"    Hvis skallvariabelen OPTERR har verdien 0, slår getopts av utskrift\n"
+"    av feilmeldinger, selv hvis første tegn i VALGSTRENG ikke er kolon.\n"
+"    OPTERR har verdien 1 som standard.\n"
+"    \n"
+"    Getopts tolker vanligvis posisjonsparametre ($0 - $9), men hvis\n"
+"    flere argumenter er gitt, blir disse tolket i stedet.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket hvis et valg finnes, og mislykket hvis et valg ikke finnes\n"
+"    eller det oppstår en annen feil."
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"Erstatt skallet med valgt kommando.\n"
+"    \n"
+"    Kjør KOMMANDO, og erstatt dette skallet med valgt program.\n"
+"    ARGUMENTER sendes videre til valgt KOMMANDO. Hvis KOMMANDO ikke er "
+"valgt,\n"
+"    blir videresendinger brukt i gjeldende skall.\n"
+"    \n"
+"    Valg:\n"
+"      -a name\tsend NAVN som argument nummer null for KOMMANDO\n"
+"      -c\t\tkjør valgt KOMMANDO med et tomt miljø\n"
+"      -l\t\tbruk bindestrek som argument nummer null for COMMAND\n"
+"    \n"
+"    Hvis kommandoen ikke kan kjøres, avsluttes ikke-interaktivt skall, med "
+"mindre\n"
+"    skallvalget «execfail» er brukt.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre valgt KOMMANDO ikke finnes eller det oppstår en "
+"videresendingsfeil."
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Avslutt skallet.\n"
+"    \n"
+"    Avslutt skallet med status N. Hvis N utelates, er statuskoden\n"
+"    den samme som forrige kjørte kommando."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Avslutt et innloggingsskall.\n"
+"    \n"
+"    Avslutter et innloggingsskall med status N. Dette gir feilmelding hvis "
+"det\n"
+"    ikke kjøres i et innloggingsskall."
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"Vis eller kjør kommandoer fra historikklista.\n"
+"    \n"
+"    fc brukes til å vise list eller redigere og kjøre kommandoer på nytt fra "
+"historikklista.\n"
+"    FØRSTE og SISTE kan være tall som angir rekkevidde. FØRSTE kan også være "
+"en\n"
+"    streng, som betyr nyeste kommando som begynner med denne strengen.\n"
+"    \n"
+"    Valg:\n"
+"      -e ENAME\tvelg hvilket redigeringsprogram som skal brukes. Standard er "
+"FCEDIT, evt. EDITOR\n"
+"    \t\teller vi\n"
+"      -l \tvis linjer i stedet for å redigere\n"
+"      -n\tikke vis linjenumre\n"
+"      -r\tvis linjer i omvendt rekkefølge (nyeste linjer øverst)\n"
+"    \n"
+"    I formatet «fc -s [pat=rep …] [kommando]» kjøres KOMMANDO\n"
+"    på nytt etter at GAMMEL=NY er utført.\n"
+"    \n"
+"    Et nyttig alias for dette er r='fc -s'. Slik blir «r cc» ensbetydende\n"
+"    med å kjøre forrige kommando med navn som begynner på «cc», og «r»\n"
+"    betyr å kjøre forrige kommando.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Enten vellykket, samme som kjørt kommando eller noe annet enn null hvis "
+"det oppstår feil."
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Flytt jobb til forgrunnen.\n"
+"    \n"
+"    Plasser jobb med id-en JOB_SPEC i forgrunnen, slik at den blir\n"
+"    gjeldende jobb. Hvis JOB_SPEC ikke er oppgitt, brukes jobben som\n"
+"    allerede oppfattes som gjeldende i skallet.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Samme som kommandoen som legges i forgrunnen, eller mislykket hvis det "
+"oppstår feil."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Flytt jobber til bakgrunnen.\n"
+"    \n"
+"    Plasser jobber med id-er JOB_SPEC i bakgrunnen, som om de\n"
+"    ble startet med «&».  Hvis JOB_SPEC ikke er oppgitt, brukes jobben som "
+"allerede\n"
+"    som gjeldende i skallet.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre jobbkontroll er slått av eller det oppstår feil."
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"Husk eller vis programplasseringer.\n"
+"    \n"
+"    Finn ut og husk fullstendige stinavn på hvert kommandoNAVN. Hvis\n"
+"    ingen argumenter er gitt, viser programmet lagrede programplasseringer.\n"
+"    \n"
+"    Valg:\n"
+"      -d\t\tglem lagret plassering av valgt(e) NAVN\n"
+"      -l\t\tskriv ut i gjenbrukbart format\n"
+"      -p stinavn\tbruk valgt STINAVN som fullstendig stinavn på valgt NAVN\n"
+"      -r\t\tglem alle lagrede plasseringer\n"
+"      -t\t\tskriv ut lagret plassering av valgt(e) NAVN, med\n"
+"    \t\tNAVN foran aktuell plassering hvis flere NAVN er valgt\n"
+"    Argumenter:\n"
+"      NAVN\t\tProgrammet søker etter hvert NAVN i $PATH og legger det til i "
+"lista\n"
+"    \t\tover lagrede kommandoer.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre NAVN ikke finnes eller bruker tar et ugyldig valg."
+
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Vis informasjon om innebygde kommandoer.\n"
+"    \n"
+"    Vis kort sammendrag om innebygde kommandoer. Hvis MØNSTER er\n"
+"    valgt, vises detaljert hjelp til bruk av alle kommandoer som samsvarer\n"
+"    med MØNSTER. Ellers vises en liste over hjelpeemner.\n"
+"    \n"
+"    Valg:\n"
+"      -d\tskriv ut en kort beskrivelse av hvert emne\n"
+"      -m\tetterlikn «manpage»-format i bruksdata\n"
+"      -s\tbare vis et kort brukssammendrag per emne som samsvarer\n"
+"    \t\tmed MØNSTER\n"
+"    \n"
+"    Argumenter:\n"
+"      MØNSTER\tVelger hjelpeemne\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre et MØNSTER ikke finnes eller bruker tar et ugyldig "
+"valg."
+
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Vis eller gjør endringer i kommandohistorikk.\n"
+"    \n"
+"    Vis historikk som en liste med linjenumre, og legg til «*» foran\n"
+"    endrede oppføringer.  Argumentet N viser siste N antall oppføringer.\n"
+"    \n"
+"    Valg:\n"
+"      -c\ttøm historikk ved å slette alle oppføringer\n"
+"      -d posisjon\tslett historikkoppføring ved valgt posisjon.\n"
+"\t\tNegativ posisjon teller fra slutten.\n"
+"    \n"
+"      -a\tlegg til linjer fra gjeldende økt i historikkfil\n"
+"      -n\tles alle historikklinjer som ikke allerede er lest inn fra "
+"historikkfil\n"
+"      -r\tles historikkfil og legg til innhold i historikkliste\n"
+"      -w\tlagre gjeldende historikk i historikkfil\n"
+"    \n"
+"      -p\tutfør historikkutvidelse per ARGument og vis resultatet\n"
+"    \tuten å lagre det i historikkliste\n"
+"      -s\tlegg til ARGumenter i historikkliste som én enkelt oppføring\n"
+"    \n"
+"    Hvis FILNAVN er valgt, brukes dette som historikkfil. Ellers brukes\n"
+"    $HISTFILE hvis den har en verdi. Ellers brukes «~/.bash_history».\n"
+"    \n"
+"    Hvis $HISTTIMEFORMAT har en verdi som ikke er null, brukes denne\n"
+"    verdien som formatstreng for strftime(3) for å skriv ut tidsstempelet i\n"
+"    hver historikkoppføring. Ellers skrives ingen tidsstempler ut.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre bruker tar et ugyldig valg eller det oppstår feil."
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"Vis status for bakgrunnsjobber.\n"
+"    \n"
+"    Vis aktive bakgrunnsjobber. JOBBSPES begrenser utskrift til valgt jobb.\n"
+"    Hvis ingenting er valgt, vises status for alle aktive jobber.\n"
+"    \n"
+"    Valg:\n"
+"      -l\tvis prosess-ID-er i tillegg til vanlig informasjon\n"
+"      -n\tbare vis prosesser som har endret stattus siden forrige\n"
+"    \tvarsling\n"
+"      -p\tbare vis prosess-ID-er\n"
+"      -r\tbare skriv ut kjørende jobber\n"
+"      -s\tbare skriv ut ventende jobber\n"
+"    \n"
+"    Hvis «-x» er valgt, kjøres KOMMANDO straks alle ARGumenterte\n"
+"    jobber er erstattet med prosess-ID-en til gjeldende prosessgruppeleder.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre bruker tar et ugyldig valg eller det oppstår "
+"feil.\n"
+"    Hvis «-x» er valgt, hentes statuskode fra aktuell KOMMANDO."
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"Fjern jobber fra gjeldende skall.\n"
+"    \n"
+"    Fjerner hvert JOBBSPES-argument fra tabellen med aktive jobber.\n"
+"    Hvis ingen JOBBSPES er valgt, brukes jobben som regnes som gjeldende.\n"
+"    \n"
+"    Valg:\n"
+"      -a\tfjern alle jobber hvis JOBBSPES ikke er angitt\n"
+"      -h\tmarker hver JOBBSPES slik at SIGHUP ikke sendes til jobben hvis "
+"skallet\n"
+"    \tmottar et SIGHUP\n"
+"      -r\tbare fjern kjørende jobber\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre bruker tar ugyldig(e) valg eller JOBBSPES."
+
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Send signal til en jobb.\n"
+"    \n"
+"    Gi prosesser (valgt med PID eller JOBBSPES) et signal\n"
+"    (valgt med SIGSPES eller SIGNUM). Hvis hverken SIGSPES eller SIGNUM er "
+"valgt,\n"
+"    brukes SIGTERM.\n"
+"    \n"
+"    Valg:\n"
+"      -s sig\tSIG er et signalnavn\n"
+"      -n sig\tSIG er et signalnummer\n"
+"      -l\tvis signalnavn. Hvis «-l» etterfølges av argumenter,\n"
+"    \tantas disse å være signalnumre som det skal vises navn på\n"
+"      -L\ttilsvarer «-l»\n"
+"    \n"
+"    Kill er en innebygget skallkommando av to grunner: den tillater bruk av "
+"jobb-ID\n"
+"    i stedet for prosess-ID, og lar bruker drepe prosesser hvis grensa for\n"
+"    antall tillatte prosesser er nådd.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre bruker tar et ugyldig valg eller det oppstår feil."
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"Kontroller aritmetiske uttrykk.\n"
+"    \n"
+"    Kontroller hvert ARGument som et aritmetisk uttrykk. Kontroll utføres i\n"
+"    breddefaste heltall uten overflodssjekk, men deling på 0 fanges opp\n"
+"    og markeres som en feil. Følgende liste over operatører er\n"
+"    sortert gruppevis på presedensnivå, som vises i synkende rekkefølge.\n"
+"    \n"
+"    \tid++, id--\tvariabel post-inkrement, post-dekrement\n"
+"    \t++id, --id\tvariabel pre-inkrement, pre-dekrement\n"
+"    \t-, +\t\tunær minus, pluss\n"
+"    \t!, ~\t\tlogisk og bitvis negasjon\n"
+"    \t**\t\teksponentiasjon\n"
+"    \t*, /, %\t\tmultiplikasjon, divisjon, rest\n"
+"    \t+, -\t\taddisjon, subtraksjon\n"
+"    \t<<, >>\t\tvenstre og høyre bitvis bytte\n"
+"    \t<=, >=, <, >\tsammenlikning\n"
+"    \t==, !=\t\tlikhet, ulikhet\n"
+"    \t&\t\tbitvis AND\n"
+"    \t^\t\tbitvis XOR\n"
+"    \t|\t\tbitvis OR\n"
+"    \t&&\t\tlogisk AND\n"
+"    \t||\t\tlogisk OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tbetinget operatør\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\toppgave\n"
+"    \n"
+"    Skallvariabler tillates som operand. Variabelens navn erstattes med\n"
+"    verdien (tvunget til et breddefast heltall) i et uttrykk.\n"
+"    Variabelen behøver ikke heltallsattributt for å kunne brukes i et "
+"uttrykk.\n"
+"    \n"
+"    Operatører regnes ut etter presedens. Underuttrykk i parentes\n"
+"    regnes ut først, og kan overstyre overnevnte presedensregler.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Hvis siste ARGument blir 0, er status 1. Ellers er statuskoden 0."
+
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"Les en linje fra standard inndata og del den opp i felt.\n"
+"    \n"
+"    Leser en enkeltlinje fra standard inndata, eller fra fildeskriptor FD\n"
+"    hvis «-u» er valgt. Linja deles opp i felt på samme måte som orddeling.\n"
+"    Første ord tildeles første NAVN, ord nummer to til NAVN nummer to,\n"
+"    og så videre. Eventuelle restrerende ord tildeles siste NAVN.\n"
+"    Bare tegn som finnes i $IFS regnes som ord-skilletegn.\n"
+"    \n"
+"    Hvis ingen NAVN er oppgitt, legges lest linje i variabelen REPLY.\n"
+"    \n"
+"    Valg:\n"
+"      -a tabell\tknytt leste ord til sekvens-indekser i \n"
+"    \t\ttabellvariabelen TABELL, talt fra null\n"
+"      -d skill\tfortsett frem til første SKILLetegn, i stedet for frem til "
+"linjeskift\n"
+"      -e\t\tbruk Readline til å hente linje\n"
+"      -i tekst\tBruk valgt TEKST med Readline\n"
+"      -n n\tgå tilbake etter å ha lest N antall tegn i stedet for å vente på "
+"ny linje,\n"
+"    \t\tmen bruk skilletegn hvis linja er kortere enn N\n"
+"    \t\tles tegn før skilletegn\n"
+"      -N N\tgå tilbake etter å ha lest nøyaktig N antall tegn, med mindre\n"
+"    \t\tEOF eller tidsavbrudd oppstår (skilletegn ignoreres)\n"
+"      -p ledet\tskriv ut valgt LEDETekst uten å legge til linjeskift før "
+"lesing\n"
+"      -r\t\tikke tillat bruk av skråstrek som skiftetegn\n"
+"      -s\t\tikke skriv ut inndata som kommer fra en terminal\n"
+"      -t tidsav\tavbryt og avslutt med feil hvis en hel linje med inndata\n"
+"    \t\tikke blir lest ferdig innen valgt TIDSAVbrudd (i sekunder).\n"
+"    \t\tStandard avbruddstid hentes fra variabelen TMOUT. TIDSAVbrudd kan "
+"være\n"
+"    \t\tet brøktall. Hvis TIDSAV er 0, går read tilbake umiddelbart,\n"
+"    \t\tog prøver ikke å lese data. I sistnevnte tilfelle avslutter read "
+"bare\n"
+"    \t\tvellykket hvis inndata er tilgjengelig på valgt fildeskriptor.\n"
+"    \t\tAvslutningsstatus er større enn 128 ved tidsavbrudd\n"
+"      -u fd\t\tles fra fildeskriptor FD i stedet for standard inndata\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Null (vellykket), med mindre programmet møter EOF, får tidsavbrudd\n"
+"    (i så fall er verdien høyere enn 128), det oppstår en variabel-"
+"tidelingsfeil,\n"
+"    eller valget «-u» argumenteres med en ugyldig fildeskriptor."
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"GÃ¥ ut av en skallfunksjon.\n"
+"    \n"
+"    Avslutter en funksjon eller kildeskript med status N.\n"
+"    Hvis N er utelatt, brukes statuskoden fra forrige kommando\n"
+"    i funksjonen eller skriptet.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    N, eller mislykket hvis skallet ikke kjører en funksjon eller et skript."
+
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"Legg til eller fjern verdier for skallvalg og posisjonsparametre.\n"
+"    \n"
+"    Endre verdier av skall-attributter og posisjonsparametre, eller\n"
+"    vis navn og verdier av skallvariabler.\n"
+"    \n"
+"    Valg:\n"
+"      -a  Marker variabler som er endret eller laget for eksportering.\n"
+"      -b  Varsle jobbavbrudd umiddelbart.\n"
+"      -e  Avslutt hvis en kommando avslutter med annen status enn null.\n"
+"      -f  Slå av generering av filnavn («globbing»).\n"
+"      -h  Husk plassering av kommandoer ved oppslag.\n"
+"      -k  Legg alle tildelingsargumenter for en kommando i miljøet,\n"
+"          og ikke bare de som kommer før kommandonavnet.\n"
+"      -m  Slå på jobbkontroll.\n"
+"      -n  Les kommandoer, men ikke kjør dem.\n"
+"      -o valgnavn\n"
+"          Gi verdi til variabelen som samsvarer med valgnavn:\n"
+"              allexport    tilsvarer «-a»\n"
+"              braceexpand  tilsvarer «-B»\n"
+"              emacs        rediger linjer med et emacs-aktig grensesnitt\n"
+"              errexit      tilsvarer «-e»\n"
+"              errtrace     tilsvarer «-E»\n"
+"              functrace    tilsvarer «-T»\n"
+"              hashall      tilsvarer «-h»\n"
+"              histexpand   tilsvarer «-H»\n"
+"              history      slå på kommandohistorikk\n"
+"              ignoreeof    ikke avslutt skall ved lesing av EOF\n"
+"              interactive-comments\n"
+"                           tillat kommentarer i interaktive kommandoer\n"
+"              keyword      tilsvarer «-k»\n"
+"              monitor      tilsvarer «-m»\n"
+"              noclobber    tilsvarer «-C»\n"
+"              noexec       tilsvarer «-n»\n"
+"              noglob       tilsvarer «-f»\n"
+"              nolog        godtas, men ignoreres\n"
+"              notify       tilsvarer «-b»\n"
+"              nounset      tilsvarer «-u»\n"
+"              onecmd       tilsvarer «-t»\n"
+"              physical     tilsvarer «-P»\n"
+"              pipefail     returverdi av en kommandokø er statusen for\n"
+"                           siste kommando som avslutter med en annen status "
+"enn null,\n"
+"                           eller null hvis alle kommandoer avsluttet med "
+"null\n"
+"              posix        endre bash-oppførsel hvor standardoppførselen er\n"
+"                           annerledes enn Posix-standarden, slik at bash\n"
+"                           samsvarer med Posix\n"
+"              privileged   tilsvarer «-p»\n"
+"              verbose      tilsvarer «-v»\n"
+"              vi           rediger linjer med et vi-aktig grensesnitt\n"
+"              xtrace       tilsvarer «-x»\n"
+"      -p  Slått på når virkelig og effektiv bruker-ID ikke er like.\n"
+"          Dette slår av behandling av fila $ENV og importering av\n"
+"          skallfunksjoner. Hvis du slår av dette valget, blir effektiv uid "
+"og\n"
+"          gid det samme som virkelig uid og gid.\n"
+"      -t  Avslutt når én kommando er lest og kjørt.\n"
+"      -u  Behandle udefinerte variabler som en feil.\n"
+"      -v  Skriv ut skall-inndatalinjer når de leses.\n"
+"      -x  Skriv ut kommandoer og argumenter når de kjøres.\n"
+"      -B  utfør «brace»-utvidelse\n"
+"      -C  Ikke tillat overskriving av vanlige filer ved\n"
+"          videresending av utdata.\n"
+"      -E  Gi ERR-felle videre til skallfunksjoner.\n"
+"      -H  Slå på historikk-subsidiering i «!»-stil. Dette er slått på\n"
+"          som standard i interaktive skall.\n"
+"      -P  Ikke følg symbolske lenker ved kjøring av kommandoer\n"
+"          som «cd».\n"
+"      -T  Gi DEBUG-felle videre til skallfunksjoner.\n"
+"      --  Tildel gjenstående argumenter til posisjonsparametre.\n"
+"          Hvis ingen argumenter gjenstår, tømmes posisjonsparametrene.\n"
+"      -   Knytt gjenstående argumenter til posisjonsparametre.\n"
+"          Valgene «-x» og «-v» er slått av.\n"
+"    \n"
+"    Bruk «+» i stedet for «-» for å slå av disse valgene.\n"
+"    De kan også brukes når skallet kalles. Gjeldende valgsett finnes\n"
+"    i «$-». Gjenstående antall ARGumenter er posisjonsparametre,\n"
+"    og tildeles i rekkefølge til $1, $2, … $n. Hvis ingen\n"
+"    ARGumenter er brukt, skrives alle skallvariabler ut.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre bruker tar et ugyldig valg."
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"Fjern verdier og attributter fra skallvariabler og funksjoner.\n"
+"    \n"
+"    Fjern variabel og funksjon per oppgitt NAVN.\n"
+"    \n"
+"    Valg:\n"
+"      -f\tbehandle hvert NAVN som en skallfunksjon\n"
+"      -v\tbehandle hvert NAVN som en skallvariabel\n"
+"      -n\tbehandle hvert NAVN som en navnreferanse, og tilbakestill selve "
+"variabelen\n"
+"    \ti stedet for variabelen den refererer til\n"
+"    \n"
+"    Hvis ingen valg er tatt, prøver programmet først å tømme en variabel.\n"
+"    Hvis dette mislykkes, prøver programmet å tømme en funksjon.\n"
+"    \n"
+"    Enkelte variabler kan ikke tømmes. Se også «readonly».\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre bruker tar et ugyldig valg eller et NAVN er "
+"skrivebeskyttet."
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Gi skallvariabler eksport-attributt.\n"
+"    \n"
+"    Markerer hvert valgt NAVN for automatisk eksportering til miljøet ved "
+"etterfølgende\n"
+"    kjørte kommandoer. Hvis VERDI er oppgitt, tildeles VERDI før "
+"eksportering.\n"
+"    \n"
+"    Valg:\n"
+"      -f\thenvis til skallfunksjoner\n"
+"      -n\tfjern eksport-attributt fra valgt(e) NAVN\n"
+"      -p\tvis en liste over alle eksporterte variabler og funksjoner\n"
+"    \n"
+"    Bruk argumentet«--» for å slå av videre behandling av valg.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre bruker tar et ugyldig valg, eller et NAVN er "
+"ugyldig."
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Marker skallvariabler som skrivebeskyttet.\n"
+"    \n"
+"    Marker hvert valgt NAVN som skrivebeskyttet. Verdier av NAVN kan ikke "
+"endres\n"
+"    av etterfølgende tildeling. Hvis VERDI er oppgitt, tildeles denne før\n"
+"    variabelen markeres som skrivebeskyttet.\n"
+"    \n"
+"    Valg:\n"
+"      -a\thenvis til indekserte tabellvariabler\n"
+"      -A\thenvis til assosiative tabellvariabler\n"
+"      -f\thenvis til skallfunksjoner\n"
+"      -p\tvis en liste over alle skrivebeskyttede variabler eller "
+"funksjoner,\n"
+"            avhengig av hvorvidt «-f» er valgt\n"
+"    \n"
+"    Bruk argumentet «--» for å slå av videre behandling av valg.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre bruker tar et ugyldig valg eller NAVN."
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"Flytt posisjonsparametre.\n"
+"    \n"
+"    Gi parametrene $N+1,$N+2 osv. nye navn som $1,$2 osv. Hvis N er\n"
+"    utelatt, brukes verdien 1.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre N er negativ eller større enn $#."
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Kjør kommandoer fra en fil i gjeldende skall.\n"
+"    \n"
+"    Les og kjør kommandoer fra valgt FILNAVN i gjeldende kall.\n"
+"    Elementene i $PATH brukes til å finne mappa med valgt FILNAVN.\n"
+"    Hvis ARGUMENTER brukes, bruke disse som posisjonsparametre\n"
+"    når valgt FILNAVN kjøres.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Samme som siste kommando som ble kjørt via FILNAVN, eller\n"
+"    mislykket hvis FILNAVN ikke kan leses."
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Sett skallkjøring på pause.\n"
+"    \n"
+"    Sett kjøring av dette skallet på pause inntil det mottar et SIGCONT-"
+"signal.\n"
+"    Innloggingsskall kan ikke settes på pause med mindre du tvinger det "
+"fram.\n"
+"    \n"
+"    Valg:\n"
+"      -f\ttving skallpause, selv hvis skallet er et innloggingsskall\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre jobbkontroll er slått av eller det oppstår feil."
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"Kontroller betinget uttrykk.\n"
+"    \n"
+"    Avslutter med status 0 (positiv, «true») eller 1 (negativ, «false»)\n"
+"    i henhold til resultatet av valgt UTTRykk. Uttrykk kan være unære eller "
+"binære.\n"
+"    Unære uttrykk brukes ofte for å undersøke status for en fil.\n"
+"    Streng- og tallkontroll-valg kan også brukes.\n"
+"    \n"
+"    Test endrer oppførsel i henhold til antall argumenter.\n"
+"    Se bash-bruksanvisninga for en fullstendig spesifikasjon.\n"
+"    \n"
+"    Filvalg:\n"
+"    \n"
+"      -a FIL        Positiv hvis FIL finnes.\n"
+"      -b FIL        Positiv hvis FIL er blokk-spesialfil.\n"
+"      -c FIL        Positiv hvis FIL er tegn-spesialfil.\n"
+"      -d FIL        Positiv hvis FIL er en mappe.\n"
+"      -e FIL        Positiv hvis FIL finnes.\n"
+"      -f FIL        Positiv hvis FIL finnes og er en vanlig fil.\n"
+"      -g FIL        Positiv hvis FIL er «set-group-id».\n"
+"      -h FIL        Positiv hvis FIL er en symbolsk lenke.\n"
+"      -L FIL        Positiv hvis FIL er en symbolsk lenke.\n"
+"      -k FIL        Positiv hvis FIL er «sticky».\n"
+"      -p FIL        Positiv hvis FIL er et navngitt datarør.\n"
+"      -r FIL        Positiv hvis FIL kan leses av deg.\n"
+"      -s FIL        Positiv hvis FIL finnes og ikke er tom.\n"
+"      -S FIL        Positiv hvis FIL er en sokkel.\n"
+"      -t FD          Positiv hvis FD er åpen i en terminal.\n"
+"      -u FIL        Positiv hvis FIL er «set-user-id».\n"
+"      -w FIL        Positiv hvis FIL kan overskrives av deg.\n"
+"      -x FIL        Positiv hvis FIL kan kjøres av deg.\n"
+"      -O FIL        Positiv hvis FIL har deg som effektiv eier.\n"
+"      -G FIL        Positiv hvis FIL har din gruppe som effektiv "
+"gruppetilhørighet.\n"
+"      -N FIL        Positiv hvis FIL er blitt endret siden den ble lest "
+"sist.\n"
+"    \n"
+"      FIL1 -nt FIL2  Positiv hvis FIL1 er nyere enn FIL2 (i følge\n"
+"                       endringsdato).\n"
+"    \n"
+"      FIL1 -ot FIL2  Positiv hvis FIL1 er eldre enn FIL2.\n"
+"    \n"
+"      FIL1 -ef FIL2  Positiv hvis FIL1 er en hard lenke til FIL2.\n"
+"    \n"
+"    Strengvalg:\n"
+"    \n"
+"      -z STRENG      Positiv hvis STRENG er tom.\n"
+"    \n"
+"      -n STRENG\n"
+"         STRENG      Positiv hvis STRENG ikke er tom.\n"
+"    \n"
+"      STRENG1 = STRENG2\n"
+"                     Positiv hvis STRENGene er like.\n"
+"      STRENG1 != STRENG2\n"
+"                     Positiv hvis STRENGene ikke er like.\n"
+"      STRENG1 < STRENG2\n"
+"                     Positiv hvis STRENG1 havner over STRENG2 når de "
+"sorteres leksikografisk.\n"
+"      STRENG1 > STRENG2\n"
+"                     Positiv hvis STRENG1 havner under STRENG2 når de "
+"sorteres leksikografisk.\n"
+"    \n"
+"    Andre valg:\n"
+"    \n"
+"      -o VALG      Positiv hvis skallvalget OPTION er slått på.\n"
+"      -v VAR\t Positiv hvis skallvariabelen VAR har en verdi\n"
+"      -R VAR\t Positiv hvis skallvariabelen VAR har en verdi, og er en "
+"navnreferanse.\n"
+"      ! UTTR         Positiv hvis UTTR er usant.\n"
+"      UTTR1 -a UTTR2 Positiv hvis både UTTR1 og UTTR2 er sanne.\n"
+"      UTTR1 -o UTTR2 Positiv hvis enten UTTR1 eller UTTR2 er sanne.\n"
+"    \n"
+"      arg1 OP arg2   Aritmetiske tester. OP må være enten «-eq», «-ne»,\n"
+"                     «-lt», «-le», «-gt» eller «-ge».\n"
+"    \n"
+"    Aritmetiske binærvalg gir positiv verdi hvis ARG1 er lik, ulik, mindre "
+"enn,\n"
+"    lik-eller-mindre-enn, større enn eller større-enn-eller-lik ARG2.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket hvis UTTR gir positiv verdi, og mislykket hvis det gir negativ "
+"verdi eller\n"
+"    bruker skriver inn et ugyldig argument."
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Kontroller betinget uttrykk.\n"
+"    \n"
+"    Dette er synonymt med den innebygde kommandoen «test», men\n"
+"    siste argument må være «]» for å samsvare med «[»."
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Vis prosesstider.\n"
+"    \n"
+"    Skriver ut oppsamlet bruker- og systemtid for skallet og alle "
+"underprosesser.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Alltid vellykket."
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"Fang signaler og andre hendelser.\n"
+"    \n"
+"    Definerer og slår på brytere som skal kjøres når skallet mottar "
+"signaler\n"
+"    eller havner i andre tilstander.\n"
+"    \n"
+"    ARG er en kommando som skal leses og kjøres når skallet mottar signalet/-"
+"ene\n"
+"    i henhold til SIGNALSPES. Hvis ARG er enten utelatt eller «-»,\n"
+"    og én SIGNALSPES er brukt, tilbakestilles valgt(e) signal(er) til\n"
+"    opprinnelig verdi. Hvis ARG er null, ignoreres SIGNALSPES av skallet\n"
+"    og kommandoene det kjører.\n"
+"    \n"
+"    Hvis en SIGNALSPES er EXIT (0), kjøres ARG når skallet avslutter.\n"
+"    Hvis en SIGNALSPES er DEBUG, kjøres ARG før hver kommando.\n"
+"    Hvis en SIGNALSPES er RETURN, kjøres ARG hver gang en skallfunksjon, "
+"skript\n"
+"    eller innebygd kommando har kjørt ferdig. Hvis en SIGNALSPES\n"
+"    er ERR, kjøres ARG hver gang en feilkjørt kommando ville ført til at "
+"skallet\n"
+"    avsluttes når «-e» er valgt.\n"
+"    \n"
+"    Hvis ingen argumenter er brukt, skriver trap ut en liste over "
+"kommandoer\n"
+"    som er tilknyttet hvert signal.\n"
+"    \n"
+"    Valg:\n"
+"      -l\tskriv ut en liste over signalnavn og tilknyttede numre\n"
+"      -p\tvis trap-kommandoer som er tilknyttet hver SIGNALSPESifikasjon\n"
+"    \n"
+"    Hver SIGNALSPES er enten et signalnavn fra <signal.h> eller et "
+"signalnummer.\n"
+"    Signalnavn skiller mellom små og store bokstaver. Prefikset «SIG» er "
+"valgfritt.\n"
+"    Du kan sende et signal til skallet med «kill -signal $$».\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre en SIGNALSPES eller et valg er ugyldig."
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"Vis informasjon om kommandotype.\n"
+"    \n"
+"    Vis hvordan hvert NAVN ville blitt tolket hvis det ble brukt som\n"
+"    et kommandonavn.\n"
+"    \n"
+"    Valg:\n"
+"      -a\tvis alle plasseringer som inneholder en kjørbar fil med oppgitt "
+"NAVN.\n"
+"    \tHer inngår alle alias, innebygde kommandoer og funksjoner, med mindre\n"
+"    \t«-p» er valgt i tillegg\n"
+"      -f\tikke slå opp skallfunksjoner\n"
+"      -P\ttving et søk i STI etter NAVN, selv hvis det er et alias,\n"
+"    \tinnebygd kommando eller en funksjon, og vis navn på fila\n"
+"    \tsom ville blitt kjørt\n"
+"      -p\tvis enten navn på fila som ville blitt kjørt, eller ingenting "
+"hvis\n"
+"    \t«type -t NAVN» ikke fører til «file».\n"
+"      -t\tbeskriv NAVN som enten «alias», «keyword» (nøkkelord),\n"
+"    \t«function» (funksjon), «builtin» (innebygd kommando), «file» (fil) "
+"eller \n"
+"    \t«'» (ikke funnet), if NAME is an alias, shell\n"
+"    \n"
+"    Argumenter:\n"
+"      NAVN\tKommandonavn som skal tolkes.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket hvis alle NAVN finnes, og mislykket hvis ett eller flere ikke "
+"finnes."
+
+#: builtins.c:1431
+#, fuzzy
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Endre grenser for skallressurser.\n"
+"    \n"
+"    Lar deg kontrollere mengden ressurser som skal være tilgjengelig for "
+"skall og\n"
+"    prosessene det lager på systemer som tillater det.\n"
+"    \n"
+"    Valg:\n"
+"      -S\tbruk myk («soft») ressursgrense\n"
+"      -H\tbruk «hard» ressursgrense\n"
+"      -a\tvis alle gjeldende grenser\n"
+"      -b\tstørrelse på sokkel-mellomlager\n"
+"      -c\tmaksimal størrelse på opprettede kjernefiler\n"
+"      -d\tmaksimal størrelse på datasegment av en prosess\n"
+"      -e\tmaksimal prioritet («nice»-verdi)\n"
+"      -f\tmaksimal størrelse på filer som skrives av skallet og "
+"underprosesser\n"
+"      -i\tmaksimalt antall ventende signaler\n"
+"      -l\tmaksimal minnemengde en prosess kan låse\n"
+"      -m\tmaksimal «resident set»-størrelse\n"
+"      -n\tmaksimalt antall åpne fildeskriptorer\n"
+"      -p\tstørrelse på mellomlager for datarør\n"
+"      -q\tmaksimalt antall byte i POSIX-meldingskøer\n"
+"      -r\tmaksimal sanntidsprioritet\n"
+"      -s\tmaksimal stabelstørrelse\n"
+"      -t\tmaksimal cpu-tid (i sekunder)\n"
+"      -u\tmaksimalt antall brukerprosesser\n"
+"      -v\tstørrelsen på virtuelt minne\n"
+"      -x\tmaksimalt antall fillåser\n"
+"      -T    maksimalt antall tråder\n"
+"    \n"
+"    Det er ikke alle valg som støttes på alle plattformer.\n"
+"    \n"
+"    Hvis GRENSE er oppgitt, brukes denne som ny verdi for valgt ressurs.\n"
+"    Du kan også bruke spesialverdiene «soft» (myk), «hard», og "
+"«unlimited» (ubegrenset).\n"
+"    Ellers skriver programmet ut gjeldende verdi av valgt ressurs. Hvis "
+"ingenting\n"
+"    er valgt, brukes «-f».\n"
+"    \n"
+"    Verdier oppgis i 1024-byte-enheter, bortsett fra «-t» som oppgis i "
+"sekunder,\n"
+"    «-p» som oppgis i 512-byte-enheter og «-u» som er et uskalert antall "
+"prosesser.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre bruker tar et ugyldig valg eller det oppstår feil."
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"Vis eller endre filmodus-maske.\n"
+"    \n"
+"    Endrer brukers standardmaske for nye filer til valgt MODUS. Hvis ingen\n"
+"    MODUS er valgt, skrives gjeldende maskeverdi ut.\n"
+"    \n"
+"    Hvis MODUS begynner med et siffer, tolkes den som et oktalt tall,\n"
+"    og ellers som en symbolsk modusstreng av typen som brukes av chmod(1).\n"
+"    \n"
+"    Valg:\n"
+"      -p\tskriv ut i et format som kan gjenbrukes som inndata hvis ingen "
+"MODUS er valgt\n"
+"      -S\tgjør utdata symbolsk (ikke skriv ut oktaltall)\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre MODUS er ugyldig eller bruker tar et ugyldig valg."
+
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"Vent på fullføring av jobb, og skriv ut avslutningsstatus.\n"
+"    \n"
+"    Vent på valgt(e) prosess(er) (valgt med ID, som kan være prosess-ID "
+"eller\n"
+"    jobbspesifikasjon), og skriv ut statuskode. Hvis ID ikke er valgt,\n"
+"    venter programmet på alle aktive underprosesser, og avslutter\n"
+"    med kode null. Hvis ID er en jobbspesifikasjon, venter programmet på "
+"alle\n"
+"    prosesser i kommandokøen for valgt jobb.\n"
+"    \n"
+"    Hvis «-n» er valgt, skriver programmet ut avslutningsstatus for neste "
+"jobb.\n"
+"    \n"
+"    Hvis «f» er valgt og jobbkontroll er slått på, venter programmet på at\n"
+"    valgt ID skal avslutte i stedet for å vente på statusendring.\n"
+"    Avslutningsstatus:\n"
+"    Samme som siste ID, eller mislykket hvis enten ID er ugyldig eller\n"
+"    bruker tar et ugyldig valg."
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"Vent på ferdigstillelse av prosess, og rapporter avslutningsstatus.\n"
+"    \n"
+"    Venter på hver prosess som er valgt med PID, og rapporterer avsluttende "
+"statuskode.\n"
+"    Hvis PID ikke er valgt, venter kommandoen på alle aktive "
+"underprosesser,\n"
+"    og avslutter med null-status. PID må være en prosess-ID.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Samme som siste PID. Mislykket hvis PID er ugyldig, eller hvis\n"
+"    bruker tar et ugyldig valg."
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Kjør kommandoer for hvert medlem i en liste.\n"
+"    \n"
+"    Løkka «for» kjører en rekke kommandoer per medlem i en liste\n"
+"    over elementer. Hvis «in ORD …;» ikke er angitt, brukes«in \"$@\"».\n"
+"    NAVN gis til hvert element i ORD, og KOMMANDOER kjøres.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Samme som sist kjørte kommando."
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Aritmetisk «for»-løkke.\n"
+"    \n"
+"    Tilsvarer\n"
+"    \t(( UTTR1 ))\n"
+"    \twhile (( UTTR2 )); do\n"
+"    \t\tKOMMANDOER\n"
+"    \t\t(( UTTR3 ))\n"
+"    \tdone\n"
+"    UTTR1, UTTR2 og UTTR3 er aritmetiske uttrykk. Hvis et uttrykk\n"
+"    utelates, oppfører programmet seg som om uttrykket er lik 1.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Samme som sist kjørte kommando."
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Velg ord fra en liste og kjør kommandoer.\n"
+"    \n"
+"    Utvid og lag en liste av valgt(e) ORD.\n"
+"    Utvidede ord skrive ut på standard feilkanal, anledet av et tall.\n"
+"    Hvis «in ORD» ikke er valgt, brukes «in \"$@\"». Deretter vises\n"
+"    PS3-ledetekst, og en linje leses fra standard inndata. Hvis linja\n"
+"    består av et tall som tilsvarer antall ord, endres NAVN slik at det\n"
+"    tilsvarer dette tallet. Hvis linja er tom, vises ORD og ledetekst på\n"
+"    nytt.  Hvis programmet møter EOF, avslutter kommandoen. Andre\n"
+"    verdier fører til at NAVN endres til null. Lest linje lagres i "
+"variabelen\n"
+"    REPLY. KOMMANDOER kjøres etter hvert utvalg frem til programmet\n"
+"    støter på en bruddkommando.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Samme som sist kjørt kommando."
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"Rapporter medgått tid i kommandokø-kjøring.\n"
+"    \n"
+"    Kjør valgt DATARØR og skriv ut en oppsummering av reell tid, bruker-CPU-"
+"tid\n"
+"    og system-CPU-tid som er medgått ved kjøring av DATARØR idet det "
+"avsluttes.\n"
+"    \n"
+"    Valg:\n"
+"      -p\tkjør tidsoppsummering i gjenbrukbart Posix-format.\n"
+"    \n"
+"    Verdien av variabelen «TIMEFORMAT» brukes som utdata-format.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Samme som statuskoden fra valgt DATARØR."
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Kjør kommandoer basert på mønster-søk.\n"
+"    \n"
+"    Kjør KOMMANDOER som samsvarer med ORD og MØNSTER.\n"
+"    Tegnet «|» brukes til å holde mønstre adskilt.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Samme som sist kjørte kommando."
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Kjør kommandoer på gitte betingelser.\n"
+"    \n"
+"    Kjør lista «if KOMMANDOER». Hvis avslutningsstatus er null, kjøres\n"
+"    «then KOMMANDOER». Ellers kjøres hver «elif KOMMANDOER»-liste\n"
+"    etter tur. Hvis status er null ved sistnevnte, kjøres tilhørende «then "
+"KOMMANDOER»\n"
+"    og if-kommandoen avslutter. Ellers kjøres evt. lista «else KOMMANDOER».\n"
+"    Avslutningsstatus for hele betingelsesuttrykket er statuskoden fra sist "
+"kjørt kommando,\n"
+"    eller null hvis ingen tilstand er sann.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Samme som sist kjørt kommando."
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Kjør kommandoer så lenge en test lykkes.\n"
+"    \n"
+"    Utvid og kjør KOMMANDOER så lenge siste kommando i\n"
+"    «while» avslutter med null-status.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Samme som sist kjørte kommando."
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Kjør kommandoer så lenge en test mislykkes.\n"
+"    \n"
+"    Utvid og kjør KOMMANDOER så lenge siste kommando i\n"
+"    «until» avslutter med en annen statuskode enn null.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Samme som sist kjørte kommando."
+
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"Lag medprosess med valgt NAVN.\n"
+"    \n"
+"    Kjør valgt KOMMANDO synkront, med standard inn- og utdata for "
+"kommandoen\n"
+"    som er tilkoblet via et datarør til fildeskriptorer med indeks 0 og 1 i "
+"en tabellvariabel \n"
+"    med oppgitt NAVN i kjørende skall.\n"
+"\v    StandardNAVN er «COPROC».\n"
+"    \n"
+"    coproc avslutter med kode 0."
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"Definer en skallfunksjon.\n"
+"    \n"
+"    Lag en skallfunksjon med valgt NAVN. NAVN kjører KOMMANDOer i gjeldende "
+"skallkontekst\n"
+"    når det kjøres som en enkel kommando, og argumenter videresendes til "
+"funksjonen som\n"
+"    $1…$n. Funksjonens navn ligger i $FUNCNAME.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre valgt NAVN er skrivebeskyttet."
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Organiser kommandoer i grupper.\n"
+"    \n"
+"    Kjør en rekke kommandoer som en gruppe. Slik kan du videresende\n"
+"    et helt kommandosett.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Samme som sist kjørt kommando."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"Gjenoppta jobb i forgrunnen.\n"
+"    \n"
+"    Tilsvarer argumentet «JOBBSPES» for kommandoen «fg». Gjenoppta\n"
+"    en jobb som venter eller kjører i bakgrunnen. «JOBBSPES» kan\n"
+"    enten være et jobbnavn eller -nummer. Bruk «&» etter JOBBSPES for å\n"
+"    legge jobben i bakgrunnen, som om jobbspesifikasjonen var et argument "
+"for «bg».\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Samme som statuskoden for gjenopptatt jobb."
+
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"GÃ¥ gjennom aritmetisk uttrykk.\n"
+"    \n"
+"    Valgt UTTRYKK prøves i henhold til regler for aritmetisk utregning.\n"
+"    Tilsvarer «let UTTRYKK».\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    1 hvis UTTRYKK blir 0, og ellers 0."
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"Kjør betinget kommando.\n"
+"    \n"
+"    Gir statuskode 0 eller 1, avhengig av utfallet av betinget UTTRYKK.\n"
+"    Uttrykk bygges opp på samme måte som i den innebygde kommandoen «test»,\n"
+"    og kan kombineres som følger:\n"
+"    \n"
+"      ( UTTRYKK )\tViser verdien av UTTRYKK\n"
+"      ! UTTRYKK\t\tPositiv hvis UTTRYKK er usant, ellers negativ\n"
+"      UTTR1 && UTTR2\tPositiv hvis både UTTR1 og UTTR2 er sant, ellers "
+"negativ\n"
+"      UTTR1 || UTTR2\tPositiv hvis enten UTTR1 eller UTTR2 er sant, ellers "
+"negativ\n"
+"    \n"
+"    Ved bruk av «==» og «!=» brukes etterfølgende streng som\n"
+"    et mønster, og programmet utfører mønsterutlikning.\n"
+"    Ved bruk av «=~» utliknes etterfølgende streng som\n"
+"    et regulært uttrykk.\n"
+"    \n"
+"    Valgene «&&» og «||» kontrollerer ikke UTTR2 hvis UTTR1 allerede\n"
+"    har gitt svar på uttrykkets verdi.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    0 eller 1, avhengig av UTTRYKKets verdi."
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"Vanlige skallvariabel-navn og bruk.\n"
+"    \n"
+"    BASH_VERSION\tInformasjon om Bash-versjon.\n"
+"    CDPATH\tEn kolondelt liste over mapper som skal gjennomsøkes\n"
+"    \t\tfor mapper som er brukt som argumenter for «cd».\n"
+"    GLOBIGNORE\tEn kolondelt liste over mønstre som beskriver filnavn\n"
+"    \t\tsom skal ignoreres av stinavn-utvidelse.\n"
+"    HISTFILE\tNavn på fil hvor kommandohistorikk for gjeldende bruker er "
+"lagret.\n"
+"    HISTFILESIZE\tMaksimalt antall linjer denne fila kan inneholde.\n"
+"    HISTSIZE\tMaksimalt antall historikklinjer et kjørende skall har tilgang "
+"til.\n"
+"    HOME\tFullstendig sti til gjeldende brukers hjemmemappe.\n"
+"    HOSTNAME\tNavn på gjeldende vert.\n"
+"    HOSTTYPE\tType prosessor denne versjonen av Bash kjører på.\n"
+"    IGNOREEOF\tKontrollerer skallets handling ved mottak av\n"
+"    \t\tEOF-tegn som eneste inndata. Hvis denne har en verdi, er verdien\n"
+"    \t\tgjeldende antall EOF-tegn som kan dukke opp på rad på en tom linje\n"
+"    \t\tfør skallet avslutter (standard: 10). Hvis denne ikke har en verdi,\n"
+"    \t\ttolkes EOF som slutt på inndata.\n"
+"    MACHTYPE\tEn streng som beskriver systemet Bash kjører på nå.\n"
+"    MAILCHECK\tHvor ofte (i sekunder) Bash skal se etter ny e-post.\n"
+"    MAILPATH\tEn kolondelt liste over filnavn som Bash skal gjennomsøke\n"
+"    \t\tfor ny e-post.\n"
+"    OSTYPE\tVersjonen av Unix som denne versjonen av Bash kjører på.\n"
+"    PATH\tEn kolondelt liste over mapper som skal gjennomsøkes\n"
+"    \t\tved søk etter kommandoer.\n"
+"    PROMPT_COMMAND\tEn kommando som skal kjøres før utskrift av\n"
+"    \t\tprimær ledetekst.\n"
+"    PS1\t\tPrimær ledetekst-streng.\n"
+"    PS2\t\tSekundær ledetekst-streng.\n"
+"    PWD\t\tFullstendig sti til gjeldende mappe.\n"
+"    SHELLOPTS\tEn kolondelt liste over skallvalg som er i bruk.\n"
+"    TERM\tNavn på gjeldende terminaltype.\n"
+"    TIMEFORMAT\tUtdata-format for tidsstatistikk som vises av\n"
+"    \t\tdet reserverte ordet «time».\n"
+"    auto_resume\tEt kommandoord som dukker opp alene på en linje\n"
+"    \t\tblir kontrollert mot lista over ventende jobber. Hvis kommandoen "
+"finnes\n"
+"    \t\ti lista, flyttes den til forgrunnen.\n"
+"    \t\tVerdien «exact» betyr at kommandoen må være helt lik\n"
+"    \t\tet kommandonavn i lista over ventende jobber.\n"
+"    \t\t«substring» betyr at kommandoen må samsvare med en del\n"
+"    \t\tav navnet. Andre verdier betyr at kommandoen må\n"
+"    \t\tvære et prefiks av en ventende jobb.\n"
+"    histchars\tTegn som styrer historikkutvidelse og hurtig-subsidiering.\n"
+"    \t\tFørste tegn er historikk-subsidieringstegnet (vanligvis «!»),\n"
+"    \t\tdet andre er hurtig-subsidieringstegnet (vanligvis «^»), og\n"
+"    \t\tdet tredje er historikk-kommentar-tegnet (vanligvis «#»).\n"
+"    HISTIGNORE\tEn kolondelt liste over mønstre som bestemmer\n"
+"    \t\thvilke kommandoer som skal lagres i historikklista.\n"
+
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Legg til mapper i stabel.\n"
+"    \n"
+"    Legg til en mappe i toppen av mappestabelen, eller roter\n"
+"    stabelen og gjør toppen av stabelen til gjeldende arbeidsmappe.\n"
+"    Hvis ingen argumenter er gitt, bytter de to øverste mappene plass..\n"
+"    \n"
+"    Valg:\n"
+"      -n\tIkke bytt mappe når mapper legges til i stabelen\n"
+"    \t(bare endre stabelen).\n"
+"    \n"
+"    Argumenter:\n"
+"      +N\tRoter stabelen og legg N-te mappe (talt fra\n"
+"    \tnull til venstre, etter «dirs») i toppen.\n"
+"    \n"
+"      -N\tRoter stabelen og legg N-te mappe (talt fra\n"
+"    \tnull til høyre, etter «dirs») i toppen.\n"
+"    \n"
+"      dir\tLegg til MAP i toppen av mappestabelen, og ta den i bruk\n"
+"    \tsom arbeidsmappe.\n"
+"    \n"
+"    Bruk kommandoen «dirs» for å vise mappestabelen.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre et ugyldig argument er brukt eller\n"
+"    mappebytte mislykkes."
+
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Fjern mapper fra stabelen.\n"
+"    \n"
+"    Fjern oppføringer fra mappestabelen. Hvis ingen argumenter er gitt,\n"
+"    fjernes øverste mappe fra stabelen, og tar i bruk ny toppmappe som "
+"arbeidsmappe.\n"
+"    \n"
+"    Valg:\n"
+"      -n\tIkke bytt mappe når mapper fjernes fra stabelen\n"
+"    \t(bare endre stabelen).\n"
+"    \n"
+"    Argumenter:\n"
+"      +N\tFjern N-te mappe (talt fra null til venstre, etter «dirs»).\n"
+"       F.eks.: «popd +0» fjerner første mappe, og «popd +1» mappe nr. 2.\n"
+"    \n"
+"      -N\tFjern N-te mappe (talt fra null til høyre, etter «dirs»).\n"
+"       F.eks.: «popd -0» fjerner siste mappe, og «popd -1» nest siste "
+"mappe.\n"
+"    \n"
+"    Bruk kommandoen «dirs» for å vise mappestabelen.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre et ugyldig argument er brukt eller\n"
+"    mappebytte mislykkes."
+
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Vis mappestabel.\n"
+"    \n"
+"    Vis liste over hurtiglagrede mapper som er hurtiglagret med\n"
+"    kommandoen «pushd». Du kan gå opp igjen med kommandoen «popd».    \n"
+"    Valg:\n"
+"      -c\ttøm mappestabel ved å slette alle elementer\n"
+"      -l\tikke skriv ut undermapper av brukers hjemmemappe som\n"
+"    \trelative stier med tilde-prefiks\n"
+"      -p\tskriv ut mappestabel med én oppføring per linje\n"
+"      -v\ttilsvarer «-p», men med stabelposisjon som prefiks\n"
+"    \n"
+"    Argumenter:\n"
+"      +N\tVis N-te oppføring (talt fra null til venstre, etter «dirs»).\n"
+"      -N\tVis N-te oppføring (talt fra null til høyre, etter «dirs»).\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre bruker tar et ugyldig valg eller det oppstår feil."
+
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"Juster og tilbakestill skallvalg.\n"
+"    \n"
+"    Endre innstilling for hvert VALGNAVN. Hvis ingen valg/argumenter er "
+"brukt,\n"
+"    skriver programmet ut alle oppgitte VALGNAVN og viser hvorvidt de har en "
+"verdi.\n"
+"    Hvis ingen VALGNAVN er oppgitt, skriver programmet ut alle skallvalg.\n"
+"    \n"
+"    Valg:\n"
+"      -o\tbegrense VALGNAVN til det som er definert med «set -o»\n"
+"      -p\tskriv ut hvert skallvalg og vis status\n"
+"      -q\tikke skriv ut noe\n"
+"      -s\tslå på (gi verdi til) hvert VALGNAVN\n"
+"      -u\tslå av (tilbakestill) hvert VALGNAVN\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket hvis VALGNAVN er slått på, og mislykket hvis enten bruker \n"
+"    tar et ugyldig valg eller VALGNAVN er slått av."
+
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"Formaterer og skriver ut ARGUMENTER på FORMATets premisser.\n"
+"    \n"
+"    Valg:\n"
+"      -v var\tlegg utdata i valgt VARiabel i stedet for å\n"
+"    \t\tvise den på standardutdata\n"
+"    \n"
+"    FORMAT er en tegnstreng som inneholder tre typer objekter:\n"
+"    - rene tegn (som kopieres til standardutdata),\n"
+"    - skiftetegn (som konverteres og kopieres til standardutdata), og\n"
+"    - formatspesifikasjoner (som skriver ut påfølgende argument).\n"
+"    \n"
+"    Printf tolker følgende standard-formatspes. i tillegg til de som "
+"står     beskrevet i printf(1):\n"
+"    \n"
+"      %b\tutvid omvendt skråstrek-skiftesekvenser i gjeldende argument\n"
+"      %q\tgi argumentet anførselstegn slik at det kan brukes som skall-"
+"inndata\n"
+"      %(fmt)T skriv ut «date-time»-streng etter bruk av FMT som "
+"formatstreng\n"
+"            med strftime(3)\n"
+"    \n"
+"    Formatet gjenbrukes etter nødvendighet for å bruke opp alle "
+"argumentene.\n"
+"    Hvis det finnes færre argumenter enn formatet krever, oppfører "
+"overflødige\n"
+"    formatstrenger seg som om de var 0-verdier eller null-strenger.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre bruker tar et ugyldig valg eller det oppstår en\n"
+"    skrive- eller tidelingsfeil."
+
+#: builtins.c:1971
+#, fuzzy
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Velg hvordan argumenter skal fullføres av Readline.\n"
+"    \n"
+"    Velg hvordan argumenter skal fullføres per NAVN.\n"
+"    Hvis brukeren ikke tar noen valg, blir gjeldende "
+"fullføringsspesifikasjoner\n"
+"    skrevet ut i et format som egner seg til gjenbruk.\n"
+"    \n"
+"    Valg:\n"
+"      -p\tskriv ut gjeldende fullføringsoppsett i et gjenbrukbart format "
+"(standard)\n"
+"      -r\tfjern en fullføringsspesifikasjon per NAVN\n"
+"    \t(eller fra alle spesifikasjoner hvis ingen NAVN er valgt)\n"
+"      -D\tbruk fullføringer og handlinger som standard for kommandoer uten\n"
+"    \tspesifikke definisjoner av fullføring\n"
+"      -E\tbruk fullføringer og handlinger på «tomme» kommandoer\n"
+"     -I\tbruk fullføringer og handlinger på første (kommando-) ord\n"
+"    \n"
+"    Handlinger tas i bruk i samme rekkefølge som valgene med\n"
+"    store bokstaver ovenfor. Valget «-D» har høyere prioritet\n"
+"    enn «-E», og begge har høyere prioritet enn «-I».\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre bruker tar et ugyldig valg eller det oppstår feil."
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Vis mulige fullføringer basert på valgene.\n"
+"    \n"
+"    Dette er ment for å brukes i en skallfunksjon som genererer mulige\n"
+"    fullføringer. Hvis argumentet ORD brukes, genererer programmet\n"
+"    søketreff på ORD.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre bruker tar et ugyldig valg eller det oppstår feil."
+
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"Endre eller vis fullføringsvalg.\n"
+"    \n"
+"    Endre fullføringsvalg per NAVN, eller kjørende fullføringsprosess hvis "
+"ingen\n"
+"    NAVN er valgt. Hvis ingen VALG er brukt, skriv enten ut fullføringsvalg "
+"per NAVN,\n"
+"    eller gjeldende fullføringsoppsett.\n"
+"    \n"
+"    Valg:\n"
+"    \t-o option\tEndre fullføringsVALG per NAVN\n"
+"    \t-D\t\tEndre valg for kommandofullføringa «default»\n"
+"    \t-E\t\tEndre valg for kommandofullføringa «empty»\n"
+"    \t-I\t\tEndre valg for fullføring av første ord\n"
+"    \n"
+"    Bruk «+o» i stedet for «-o» for å slå av valg.\n"
+"    \n"
+"    Argumenter:\n"
+"    \n"
+"    Hvert NAVN henviser til en kommando som må ha en "
+"fullføringsspesifikasjon\n"
+"    definert med den innebyde kommandoen «complete». Hvis ingen NAVN\n"
+"    er valgt, må compopt brukes av en funksjon som genererer fullføringer.\n"
+"    Valgene for den aktuelle fullføringsgeneratoren blir i så fall endret.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre bruker tar et ugyldig valg eller NAVN\n"
+"    mangler fullføringsoppsett."
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"Legg linjer fra standard inndata i en indeksert tabellvariabel.\n"
+"    \n"
+"    Legg linjer fra standard inndata i indeksert tabellvariabel TABELL, "
+"eller\n"
+"    fra fildeskriptor FD ved bruk av «-u». Variabelen MAPFILE er\n"
+"    standard TABELL.\n"
+"    \n"
+"    Valg:\n"
+"      -d skill\tBruk SKILLetegn til å avslutte linjer (i stedet for "
+"linjeskift)\n"
+"      -n antall\tIkke kopier flere enn valgt ANTALL linjer. Hvis ANTALL er "
+"0, kopieres alle linjer.\n"
+"      -O oppr\tTildel til TABELL ved indeks-OPPRinnelse. Standard indeks er "
+"0.\n"
+"      -s antall \tForkast valgt ANTALL linjer i starten.\n"
+"      -t\t\tFjern etterfølgende linjeskift fra hver lest linje.\n"
+"      -u fd\t\tLes linjer fra fildeskriptor FD i stedet for standard "
+"inndata.\n"
+"      -C tilbakekall\tVurder TILBAKEKALL hver gang valgt ANTALL linjer er "
+"lest.\n"
+"      -c antall\tVelg antall linjer som skal leses mellom hvert "
+"TILBAKEKALL.\n"
+"    \n"
+"    Argumenter:\n"
+"      ARRAY\t\tTabellvariabel-navn som skal brukes i fildata.\n"
+"    \n"
+"    Hvis «-C» er valgt men ikke «-c», brukes standardantallet 5000.  Når\n"
+"    TILBAKEKALL vurderes, argumenteres det i tillegg med indeks av neste "
+"tabellelement\n"
+"    samt linjenummeret som skal tildeles aktuelt element.\n"
+"    \n"
+"    Hvis ingen eksplisitt opprinnelse er gitt, tømmes TABELL før den får "
+"tildelt noe.\n"
+"    \n"
+"    Avslutningsstatus:\n"
+"    Vellykket, med mindre bruker tar et ugyldig valg eller TABELL enten er\n"
+"    skrivebeskyttet eller en ikke-indeksert tabell."
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Legg linjer fra en fil inn i en tabellvariabel.\n"
+"    \n"
+"    Dette er synonymt med «mapfile»."
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "Viser kontekst for kall av gjeldende underrutine.\n"
+#~ "    \n"
+#~ "    Hvis EXPR mangler, vises"
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process: prosess %5ld (%s) i _kommandokø"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "Ukjent signal #"
+
+#~ msgid "Copyright (C) 2018 Free Software Foundation, Inc."
+#~ msgstr "Opphavsrett (C) 2018 Free Software Foundation, Inc."
+
+#~ msgid "Copyright (C) 2014 Free Software Foundation, Inc."
+#~ msgstr "Opphavsrett (C) 2014 Free Software Foundation, Inc."
+
+#~ msgid ":"
+#~ msgstr ":"
+
+#~ msgid "true"
+#~ msgstr "true"
+
+#~ msgid "false"
+#~ msgstr "false"
+
+#~ msgid "times"
+#~ msgstr "times"
diff --git a/po/nl.gmo b/po/nl.gmo
new file mode 100644
index 0000000..6131322
--- /dev/null
+++ b/po/nl.gmo
diff --git a/po/nl.po b/po/nl.po
new file mode 100644
index 0000000..60b9d48
--- /dev/null
+++ b/po/nl.po
@@ -0,0 +1,5919 @@
+# Dutch translations for GNU bash.
+# Copyright (C) 2019 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+#
+# «Lernfähiger Software! Ich lach mich kaputt!»
+#
+# De vertaling van de ruim 70 laatste hulpteksten (65%) in dit bestand
+# volgt niet helemaal het normale stramien van "onbepaalde wijs voor
+# elke functieomschrijvende tekst".  De hoofddocstring gebruikt wel
+# de onbepaalde wijs, maar het begin van de gedetailleerde omschrijving
+# stapt over op de derde persoon, om daarna een passieve vorm te
+# gebruiken voor de rest van de preciseringen en uitzonderingen.
+#
+# Opmerking over vocabulair:
+# 'Stopped' wordt consequent vertaald met "Gepauzeerd", omdat "Gestopt"
+# te veel zou doen denken aan "Beëindigd", terwijl het alleen maar gaat
+# om stilstaan en niet om finale opgave.  Een alternatieve vertaling
+# zou dus "Stilstand" kunnen zijn.
+#
+# Benno Schulenberg <benno@vertaalt.nl>, 2006, 2008, 2010, 2011, 2013, 2014.
+# Benno Schulenberg <benno@vertaalt.nl>, 2015, 2016, 2019.
+# Erwin Poeze <erwin.poeze@gmail.com>, 2009.
+# Julie Vermeersch <julie@lambda1.be>, 2004.
+# Erick Branderhorst <branderh@iaehv.nl>, 1996.
+msgid ""
+msgstr ""
+"Project-Id-Version: bash-5.0\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2019-05-30 14:14+0200\n"
+"Last-Translator: Benno Schulenberg <vertaling@coevern.nl>\n"
+"Language-Team: Dutch <vertaling@vrijschrift.org>\n"
+"Language: nl\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "ongeldige array-index"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr "%s: 'nameref'-eigenschap wordt verwijderd"
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: kan geïndexeerd array niet omzetten naar associatief array"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: ongeldige sleutel voor associatief array"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: niet-numerieke index is niet mogelijk"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr "%s: %s: een index is nodig bij toekenning aan associatief array"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "Kan %s niet aanmaken: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr ""
+"bash_execute_unix_command(): kan voor opdracht geen toetsenkaart vinden"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: eerste teken dat geen witruimte is is niet '\"'"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "geen sluit-'%c' in %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: ontbrekend scheidingsteken (dubbele punt)"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "Kan %s niet losmaken"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr "accoladevervanging: onvoldoende geheugen beschikbaar voor %s"
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr "accoladevervanging: onvoldoende geheugen beschikbaar voor %u elementen"
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr "accoladevervanging: onvoldoende geheugen beschikbaar voor '%s'"
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "'%s': ongeldige naam voor alias"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "regelbewerking is niet ingeschakeld"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "'%s': ongeldige naam voor toetsenkaart"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "Kan %s niet lezen: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "'%s': onbekende functienaam"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s is aan geen enkele toets gebonden\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s kan worden aangeroepen via "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "Kan %s niet losmaken"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "herhalingsaantal"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "heeft alleen betekenis in een 'for'-, 'while'- of 'until'-lus"
+
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"De context van de aanroep van de huidige functie tonen.\n"
+"\n"
+"    Zonder argument produceert het \"$regelnummer $bestandsnaam\"; met\n"
+"    argument \"$regelnummer $functienaam $bestandsnaam\".  Deze tweede\n"
+"    vorm kan gebruikt worden om een 'stack trace' te produceren.  De\n"
+"    waarde van het argument geeft aan hoeveel frames er teruggegaan\n"
+"    moet worden; het huidige frame heeft nummer 0.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij de shell momenteel geen functie uitvoert\n"
+"    of EXPRESSIE ongeldig is."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "HOME is niet gedefinieerd"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "te veel argumenten"
+
+#: builtins/cd.def:342
+msgid "null directory"
+msgstr "null-map"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "OLDPWD is niet gedefinieerd"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "regel %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "waarschuwing: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: Gebruik:  "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: optie vereist een argument"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: vereist een numeriek argument"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: niet gevonden"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: ongeldige optie"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: ongeldige optienaam"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "'%s': is geen geldige naam"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "ongeldig octaal getal"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "ongeldig hexadecimaal getal"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "ongeldig getal"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: ongeldige signaalaanduiding"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "'%s': is geen PID en geen geldige taakaanduiding"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: is een alleen-lezen variabele"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s valt buiten bereik"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "argument"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s valt buiten bereik"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: taak bestaat niet"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: geen taakbesturing"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "geen taakbesturing"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: beperkte modus"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "beperkte modus"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: is geen ingebouwde opdracht van de shell"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "schrijffout: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "fout tijdens instellen van terminaleigenschappen: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "fout tijdens verkrijgen van terminaleigenschappen: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: fout tijdens bepalen van huidige map: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: taakaanduiding is niet eenduidig"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr "hulp is niet beschikbaar in deze versie"
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "Kan '%s' niet verwijderen: %s is alleen-lezen"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "Kan '%s' niet verwijderen"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: ongeldige actienaam"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: is geen completerings-aanduiding"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "waarschuwing: optie -F functioneert mogelijk niet zoals verwacht"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "waarschuwing: optie -C functioneert mogelijk niet zoals verwacht"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "er wordt momenteel geen completeringsfunctie uitgevoerd"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "kan alleen worden gebruikt binnen een functie"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr "%s: verwijzingsvariabele mag geen array zijn"
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr "%s: zelfverwijzing door naamsverwijzingsvariabele is niet toegestaan"
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s: circulaire naamsverwijzing"
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "'%s': ongeldige variabelenaam voor naamsverwijzing"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "'-f' kan niet gebruikt worden om een functie te definiëren"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: is een alleen-lezen functie"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr "%s: aangehaalde samengesteld-array-toekenning is verouderd"
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: kan array-variabelen niet op deze manier verwijderen"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: kan associatief array niet omzetten naar geïndexeerd array"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "dynamisch-laden is niet beschikbaar"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "kan gedeeld object %s niet openen: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "kan %s niet vinden in gedeeld object %s: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: is niet dynamisch geladen"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr "laadfunctie voor %s geeft foutcode (%d): is niet geladen"
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: is niet dynamisch geladen"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "Kan %s niet verwijderen: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: is een map"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: is geen normaal bestand"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: bestand is te groot"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: kan binair bestand niet uitvoeren"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "Kan %s niet uitvoeren: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "uitgelogd\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "geen login-shell; gebruik 'exit'"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Er zijn nog gepauzeerde taken.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Er zijn nog draaiende taken.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "geen opdracht gevonden"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "geschiedenisaanduiding"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "Kan tijdelijk bestand '%s' niet openen: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "huidige"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "taak %d is gestart zonder taakbesturing"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: ongeldige optie -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: optie vereist een argument -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "hashen is uitgeschakeld"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: de hash-tabel is leeg\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "treffers commando\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Shell-opdrachten die overeenkomen met '"
+msgstr[1] "Shell-opdrachten die overeenkomen met '"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"Er is geen hulptekst voor '%s'.\n"
+"Probeer 'help help' of 'man -k %s' of 'info %s'."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "Kan %s niet openen: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Hieronder staan alle interne shell-opdrachten opgesomd.  Typ 'help' om dit\n"
+"overzicht opnieuw te zien.  Typ 'help naam' voor meer informatie over de\n"
+"opdracht met die naam.  Typ 'info bash' voor gedetailleerde informatie over\n"
+"de gehele shell.  En gebruik 'man -k ...' of 'info ...' voor meer "
+"informatie\n"
+"over andere opdrachten.\n"
+"\n"
+"(Een sterretje (*) naast een naam betekent dat de functie uitgeschakeld "
+"is.)\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "slechts één van '-a', '-n', '-r' of '-w' is mogelijk"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "geschiedenispositie"
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: ongeldig tijdsstempel"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: geschiedenisexpansie is mislukt"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: 'inlib' is mislukt"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "bij '-x' zijn geen andere opties toegestaan"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: argumenten moeten proces-IDs of taak-IDs zijn"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Onbekende fout"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "uitdrukking werd verwacht"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: is geen geïndexeerd array"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: ongeldige aanduiding van bestandsdescriptor"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: ongeldige bestandsdescriptor: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: ongeldig regelaantal"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: ongeldig array-begin"
+
+# Quantum is een hoeveelheid regels, een getal.
+# Callback is de aan te roepen functie, maar onnodig in de vertaling.
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: ongeldige hoeveelheid"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "lege naam van array-variabele"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "ondersteuning van arrayvariabelen is vereist"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "'%s': ontbrekend opmaakteken"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "'%c': ongeldige aanduiding van tijdsopmaak"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "'%c': ongeldig opmaakteken"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "waarschuwing: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "probleem bij ontleden van opmaak: %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "ontbrekend hexadecimaal cijfer bij \\x"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "ontbrekend Unicode-cijfer bij \\%c"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "geen andere map"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s: ongeldig argument"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<geen huidige map>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "mappenstapel is leeg"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "mappenstapelindex"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Toont de huidige lijst van onthouden mappen.  Mappen worden aan deze\n"
+"    lijst toegevoegd met de opdracht 'pushd', en verwijderd met 'popd'.\n"
+"\n"
+"    Opties:\n"
+"      -c   de mappenstapel wissen door alle elementen te verwijderen\n"
+"      -l   paden niet afkorten (relatief ten opzichte van uw thuismap)\n"
+"             maar volledig weergegeven\n"
+"      -p   de mappenstapel tonen met één item per regel\n"
+"      -v   als '-p' maar met elk item voorafgegaan wordt door diens positie\n"
+"             in de stapel\n"
+"\n"
+"    Argumenten:\n"
+"      +N   Toont het N-de item, tellend vanaf links, van de lijst getoond\n"
+"           door 'dirs' wanneer opgeroepen zonder opties, beginnend bij nul.\n"
+"      -N   Toont het N-de item, tellend vanaf rechts, van de lijst getoond\n"
+"           door 'dirs' wanneer opgeroepen zonder opties, beginnend bij nul."
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Voegt een map toe aan de top van de mappenstapel, of roteert de stapel\n"
+"    en maakt de huidige werkmap gelijk aan de nieuwe top van de stapel.\n"
+"    Zonder argumenten worden de bovenste twee mappen verwisseld.\n"
+"\n"
+"    Optie:\n"
+"      -n   de verandering van map onderdukken bij het toevoegen van mappen\n"
+"             aan de stapel, zodat alleen de stapel wordt gemanipuleerd\n"
+"\n"
+"    Argumenten:\n"
+"      +N   Roteert de stapel zodat de N-de map (tellend vanaf links, van\n"
+"           de lijst getoond door 'dirs', beginned bij nul) bovenaan komt.\n"
+"      -N   Roteert de stapel zodat de N-de map (tellend vanaf rechts, van\n"
+"           de lijst getoond door 'dirs', beginned bij nul) bovenaan komt.\n"
+"      MAP  Voegt deze map toe aan de top van de mappenstapel, en maakt het\n"
+"           de nieuwe werkmap.\n"
+"\n"
+"    De opdracht 'dirs' toont de huidige mappenstapel."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Verwijdert items van de mappenstapel.  Zonder argumenten verwijdert\n"
+"    het de bovenste map van de stapel, en maakt de huidige werkmap\n"
+"    gelijk aan de nieuwe bovenste map.\n"
+"\n"
+"    Optie:\n"
+"      -n   de verandering van map onderdukken bij het toevoegen van mappen\n"
+"             aan de stapel, zodat alleen de stapel wordt gemanipuleerd\n"
+"\n"
+"    Argumenten:\n"
+"      +N   Verwijdert het N-de item tellend vanaf links (van de lijst\n"
+"           getoond door 'dirs', beginnend met nul).  Bijvoorbeeld:\n"
+"           'popd +0' verwijdert de eerste map, 'popd +' de tweede.\n"
+"      -N   Verwijdert het N-de item tellend vanaf rechts (van de lijst\n"
+"           getoond door 'dirs', beginnend met nul).  Bijvoorbeeld:\n"
+"           'popd -0' verwijdert de laatste map, 'popd -1' de voorlaatste.\n"
+"\n"
+"    De opdracht 'dirs' toont de huidige mappenstapel."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: ongeldige aanduiding van tijdslimiet"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "leesfout: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr ""
+"kan alleen een 'return' doen uit een functie of een uit script aangeroepen "
+"met 'source'"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "kan niet tegelijk een functie en een variabele verwijderen"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: is geen array-variabele"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: is geen functie"
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr "Kan '%s' niet exporteren"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "shift-aantal"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "kan shell-opties niet tegelijk inschakelen en uitschakelen"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: ongeldige shell-optienaam"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "vereist een bestandsnaam als argument"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: bestand niet gevonden"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "kan niet pauzeren"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "kan een inlog-shell niet pauzeren"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s is een alias voor '%s'\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s is een shell-sleutelwoord\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s is een functie\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s is een speciale ingebouwde shell-functie\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s is een ingebouwde shell-functie\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s is %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s is gehasht (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: ongeldige limietwaarde"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "'%c': ongeldige opdracht"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: kan de limiet niet bepalen: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "limiet"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: kan de limiet niet wijzigen: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "octaal getal"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "'%c': ongeldige operator in symbolische modus"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "'%c': ongeldig teken in symbolische modus"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " regel "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "laatste opdracht: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Afbreken..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr "informatie: "
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "onbekende opdrachtfout"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "ongeldig opdrachttype"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "ongeldige verbinder"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "ongeldige sprong"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: ongebonden variabele"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\awachten op invoer duurde te lang -- automatisch afgemeld\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "kan standaardinvoer niet omleiden vanaf /dev/null: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "TIMEFORMAT: '%c': ongeldig opmaakteken"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr "execute_coproc(): coproc [%d:%s] bestaat nog steeds"
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "pijpfout"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr "eval: maximum 'eval'-nestingsniveau is overschreden (%d)"
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr "%s: maximum 'source'-nestingsniveau is overschreden (%d)"
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr "%s: maximum functie-nestingsniveau is overschreden (%d)"
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: beperkte modus: '/' in opdrachtnamen is niet toegestaan"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: opdracht niet gevonden"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: ongeldige interpreter"
+
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: kan binair bestand %s niet uitvoeren"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "'%s' is een speciale ingebouwde shell-functie"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "kan bestandsdescriptor %d niet dupliceren naar bestandsdescriptor %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "recursieniveau van expressies is overschreden"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "recursiestapel-onderloop"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "syntaxfout in expressie"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "poging tot toewijzing aan een niet-variabele"
+
+#: expr.c:530
+msgid "syntax error in variable assignment"
+msgstr "syntaxfout in toewijzing aan variabele"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "deling door nul"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "**interne fout**: onjuist symbool in toewijzingsexpressie"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "':' werd verwacht voor een voorwaardelijke expressie"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "exponent is kleiner dan 0"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "naam verwacht na pre-increment of pre-decrement"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "ontbrekend ')'"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "syntaxfout: operator verwacht"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "syntaxfout: ongeldige rekenkundige operator"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (het onjuiste symbool is \"%s\")"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "ongeldige rekenkundige basis"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: ongeldig regelaantal"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "waarde is te groot voor basis"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: expressiefout\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getwd(): kan geen geen toegang verkrijgen tot bovenliggende mappen"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "kan 'nodelay'-modus niet uitschakelen voor bestandsdescriptor %d"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr ""
+"kan geen nieuwe bestandsdescriptor reserveren voor bash-invoer vanuit "
+"bestandsdescriptor %d"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr ""
+"check_bash_input(): buffer bestaat al voor nieuwe bestandsdescriptor %d"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline(): procesgroep van pijp"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "afgesplitst PID %d hoort bij draaiende taak %d"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "verwijderen van gepauzeerde taak %d met procesgroep %ld..."
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process(): PID %5ld (%s) staat gemarkeerd als nog actief"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid(): PID %ld bestaat niet"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Signaal %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Klaar"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Gepauzeerd"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Gepauzeerd(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "Wordt uitgevoerd"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Klaar(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Exit %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Onbekende afsluitwaarde"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(geheugendump gemaakt) "
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (werkmap: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "instellen van procesgroep %2$ld van dochter %1$ld"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait(): PID %ld is geen dochterproces van deze shell"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for(): proces %ld is nergens geregistreerd"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job(): taak %d is gepauzeerd"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: taak bestaat niet"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: taak is afgesloten"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: taak %d draait al op de achtergrond"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr ""
+"waitchld(): WNOHANG wordt ingeschakeld om een onbegrensde blokkering te "
+"vermijden"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: regel %d: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (geheugendump gemaakt)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(werkmap is nu: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: getpgrp() is mislukt"
+
+#: jobs.c:4447
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: geen taakbesturing in de achtergrond"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: lijnprotocol"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid()"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "kan procesgroep (%d) van terminal niet instellen"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "er is geen taakbesturing in deze shell"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc(): controletest is mislukt: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc(): %s:%d: controletest is mislukt\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "onbekend"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc(): een pointer op de lijst van vrije blokken is overschreven"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free(): aangeroepen met als argument een blok dat al vrijgegeven is"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free(): aangeroepen met als argument een ongebruikt blok"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free(): onderloop: 'mh_nbytes' valt buiten bereik"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free(): onderloop: 'mh_nbytes' valt buiten bereik"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free(): blokgroottes van begin en eind zijn verschillend"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc(): aangeroepen met als argument een ongebruikt blok"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc(): onderloop: 'mh_nbytes' valt buiten bereik"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc(): onderloop: 'mh_nbytes' valt buiten bereik"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc(): blokgroottes van begin en eind zijn verschillend"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc(): reserveringstabel is vol??\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc(): %p staat al als gereserveerd in tabel??\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free(): %p staat al als vrij in tabel??\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "ongeldige basis"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: onbekende host"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: ongeldige service"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: ongeldige aanduiding van netwerkpad"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "netwerkoperaties worden niet ondersteund"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale(): LC_ALL: kan niet van taalregio veranderen (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale(): LC_ALL: kan niet van taalregio veranderen (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale(): %s: kan niet van taalregio veranderen (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale(): %s: kan niet van taalregio veranderen (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "U hebt post in $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "U hebt nieuwe post in $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "De post in %s is gelezen.\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "syntaxfout: een rekenkundige uitdrukking is vereist"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "syntaxfout: onverwachte ';'"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "syntaxfout: '((%s))'"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document(): ongeldig instructietype %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr ""
+"regel %d van \"hier\"-document eindigt met einde van bestand (verwachtte "
+"'%s')"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr "make_redirection(): omleidingsinstructie '%d' valt buiten bereik"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+"shell_getc(): lengte van invoerregel (%zu) overschrijdt SIZE_MAX (%lu): "
+"regel is afgekapt"
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr "maximum aantal \"hier\"-documenten is overschreden"
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "onverwacht bestandseinde tijdens zoeken naar bijpassende '%c'"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "onverwacht bestandseinde tijdens zoeken naar ']]'"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "syntaxfout in conditionele expressie: onverwacht symbool '%s'"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "syntaxfout in conditionele expressie"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "onverwacht symbool '%s'; ')' werd verwacht"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "')' werd verwacht"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "onverwacht argument '%s' bij eenzijdige conditionele operator"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "onverwacht argument bij eenzijdige conditionele operator"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr ""
+"onverwacht symbool '%s'; tweezijdige conditionele operator werd verwacht"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "tweezijdige conditionele operator werd verwacht"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "onverwacht argument '%s' bij tweezijdige conditionele operator"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "onverwacht argument bij tweezijdige conditionele operator"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "onverwacht symbool '%c' in conditionele opdracht"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "onverwacht symbool '%s' in conditionele opdracht"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "onverwacht symbool %d in conditionele opdracht"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "syntaxfout nabij onverwacht symbool '%s'"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "syntaxfout nabij '%s'"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "syntaxfout: onverwacht bestandseinde"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "syntaxfout"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Gebruik \"%s\" om de shell te verlaten.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "onverwacht bestandseinde tijdens zoeken naar bijpassende ')'"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "completion(): functie '%s' niet gevonden"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr "programmable_completion(): %s: mogelijke herprobeerlus"
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert(): %s: lege COMPSPEC"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command(): ongeldige verbinder '%d'"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set(): %d: ongeldige bestandsdescriptor"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set(): bestandspointer is NIL"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr ""
+"xtrace-bestandsdescriptor (%d) != bestandsnummer van xtrace-bestandspointer "
+"(%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf(): '%c': ongeldig opmaakteken"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "bestandsdescriptor valt buiten bereik"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: omleiding is niet eenduidig"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: kan bestaand bestand niet overschrijven"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: beperkte modus: omleiden van uitvoer is niet toegestaan"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "kan geen tijdelijk bestand maken voor \"hier\"-document: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: kan bestandsdescriptor niet toewijzen aan variabele"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "/dev/(tcp|udp)/host/port is niet mogelijk zonder netwerk"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "omleidingsfout: kan bestandsdescriptor niet dupliceren"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "Kan /tmp niet vinden; maak deze aan!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp dient een geldige mapnaam te zijn"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr "pretty-printing-modus wordt genegeerd in interactieve shells"
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: ongeldige optie"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "kan UID niet op %d instellen; effectieve UID is %d"
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "kan GID niet op %d instellen; effectieve GID is %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr "kan debugger niet starten; debugging-modus is uitgeschakeld"
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr "%s: is een map"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "Ik heb geen naam!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, versie %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Gebruik:  %s [opties]\n"
+"          %s [opties] scriptbestand...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "Lange opties:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Korte opties:\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-ilrsD,  of -c OPDRACHT,  of -O SHOPT-OPTIE    (enkel bij aanroep)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s,  of -o optie    (veranderbaar via 'set')\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr "Typ '%s -c \"help set\"' voor meer informatie over shell-opties.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr ""
+"Typ '%s -c help' voor meer informatie over ingebouwde shell-functies.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "Gebruik de opdracht 'bashbug' om fouten in bash te rapporteren.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr "Webpagina van 'bash': <http://www.gnu.org/software/bash>\n"
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr ""
+"Algemene hulp bij gebruik van GNU-software: <http://www.gnu.org/gethelp/>\n"
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask(): %d: ongeldige operatie"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Niet-bestaand signaal"
+
+# Vroeger ging dit over het afsluiten van een modemverbinding,
+# tegenwoordig over het afsluiten van een pseudoterminal.
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Opgehangen"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Onderbroken"
+
+# Verleden tijd, "Afgesloten", net als de andere actiesignaalnamen.
+#: siglist.c:58
+msgid "Quit"
+msgstr "Afgesloten"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Ongeldige instructie"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "Traceer/breekpunt-instructie"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "ABORT-instructie"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "EMT-instructie"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Drijvendekomma-berekeningsfout"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Geëlimineerd"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Busfout"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Segmentatiefout"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Onjuiste systeemaanroep"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Gebroken pijp"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Wekker"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Beëindigd"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Urgente in-/uitvoertoestand"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Gepauzeerd (signaal)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Doorgaan"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Dochter is geëlimineerd of gestopt"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Gepauzeerd (terminalinvoer)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Gepauzeerd (terminaluitvoer)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "I/O is mogelijk"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "CPU-limiet"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "Bestandslimiet"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Alarm (virtueel)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Alarm (profiel)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Venster is veranderd"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Recordvergrendeling"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Gebruikerssignaal 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Gebruikerssignaal 2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "HFT-invoergegevens staan te wachten"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "stroomstoring dreigt"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "systeemcrash dreigt"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "proces naar andere processor verplaatsen"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "programmeerfout"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "HFT-monitormodus is gegeven"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "HFT-monitormodus is herroepen"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "HFT-geluidssequentie is afgespeeld"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "Verzoek om informatie"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "Onbekend signaal #%d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "ongeldige vervanging: geen sluit-'%s' in %s"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: kan geen lijst toewijzen aan een array-element"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "kan geen pijp maken voor procesvervanging"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "kan geen dochterproces maken voor procesvervanging"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "kan pijp genaamd %s niet openen om te lezen"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "kan pijp genaamd %s niet openen om te schrijven"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "kan pijp genaamd %s niet dupliceren als bestandsdescriptor %d"
+
+#: subst.c:6213
+msgid "command substitution: ignored null byte in input"
+msgstr "opdrachtsubstitutie: null-byte in invoer is genegeerd"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "kan geen pijp maken voor opdrachtvervanging"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "kan geen dochterproces maken voor opdrachtvervanging"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr ""
+"command_substitute(): kan pijp niet dupliceren als bestandsdescriptor 1"
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: ongeldige variabelenaam voor naamsverwijzing"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: ongeldige indirecte expansie"
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr "%s: ongeldige variabelenaam"
+
+#: subst.c:7256
+#, c-format
+msgid "%s: parameter not set"
+msgstr "%s: parameter is niet ingesteld"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: lege parameter, of niet ingesteld"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: resultaat van deeltekenreeks is kleiner dan nul"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: ongeldige vervanging"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: kan niet op deze manier toewijzen"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+"toekomstige versies van de shell zullen dit als een rekenkundige vervanging "
+"evalueren"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "ongeldige vervanging: geen afsluitende '`' in %s"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "geen overeenkomst: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "argument werd verwacht"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: een geheel-getaluitdrukking werd verwacht"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "')' werd verwacht"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "')' werd verwacht; %s gevonden"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "tweezijdige operator werd verwacht, %s gevonden"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "eenzijdige operator werd verwacht, %s gevonden"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "ontbrekende ']'"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "syntaxfout: onverwachte ';'"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "ongeldig signaalnummer"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr "trap handler: maximum 'trap-handler'-niveau is overschreden (%d)"
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps(): ongeldige waarde in trap_list[%d]: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps: signaalverwerker is SIG_DFL, herzenden van %d (%s) aan "
+"mezelf..."
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler(): ongeldig signaal %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "fout tijdens importeren van functiedefinitie voor '%s'"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "shell-niveau is te hoog (%d); teruggezet op 1"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr ""
+"make_local_variable(): er is geen functiecontext in huidige geldigheidsbereik"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: aan variabele mag geen waarde toegewezen worden"
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr "%s: toekenning van geheel getal aan naamsverwijzing"
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr ""
+"all_local_variables(): er is geen functiecontext in huidige geldigheidsbereik"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "*** %s heeft lege export-tekenreeks"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "*** ongeldig teken '%d' in export-tekenreeks voor %s"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "*** geen '=' in export-tekenreeks voor %s"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr "pop_var_context(): top van 'shell_variables' is geen functiecontext"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context(): er is geen 'global_variables'-context"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr ""
+"pop_scope(): top van 'shell_variables' is geen tijdelijk geldigheidsbereik"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: Kan %s niet openen als BESTAND"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: ongeldige waarde %s voor 'trace'-bestandsdescriptor"
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s: compatibiliteitswaarde valt buiten bereik"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Copyright (C) 2018 Free Software Foundation, Inc."
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"De licentie is GPLv3+: GNU GPL versie 3 of later.\n"
+"Zie http://gnu.org/licenses/gpl.html voor de volledige tekst.\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, versie %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr ""
+"Dit is vrije software; u mag het vrijelijk wijzigen en verder verspreiden."
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "Er is GEEN GARANTIE, voor zover de wet dit toestaat."
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: kan geen %lu bytes reserveren (%lu bytes gereserveerd)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: kan geen %lu bytes reserveren"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: kan geen %lu bytes reserveren (%lu bytes gereserveerd)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: kan geen %lu bytes reserveren"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [NAAM[=WAARDE] ... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] NAAM [NAAM...]"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpvsPSVX] [-m TOETSENKAART] [-f BESTANDSNAAM] [-q NAAM] [-u NAAM]\n"
+"           [-r TOETSENREEKS] [-x TOETSENREEKS:SHELL-OPDRACHT]\n"
+"           [TOETSENREEKS:READLINE-FUNCTIE | TOETSENREEKS:READLINE-OPDRACHT]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [N]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [N]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [INGEBOUWDE_SHELLFUNCTIE [ARGUMENT...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [EXPRESSIE]"
+
+# XXX FIXME  is this right?
+# can -@ only combine with -P, not with -L?
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|(-P [-e])] [-@] [MAP]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] OPDRACHT [ARGUMENT...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilnrtux] [-p] [NAAM[=WAARDE] ...]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilnrtux] [-p] NAAM[=WAARDE]..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [OPTIE] NAAM[=WAARDE]..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [ARGUMENT...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [ARGUMENT...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f BESTANDSNAAM] [NAAM...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [ARGUMENT...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts OPTIETEKENREEKS NAAM [ARGUMENT]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a NAAM] [OPDRACHT [ARGUMENT...]] [OMLEIDING...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [N]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [N]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr ""
+"fc [-e EDITORNAAM] [-lnr] [EERSTE] [LAATSTE]   of:  fc -s "
+"[PATROON=VERVANGING] [OPDRACHT]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [TAAKAANDUIDING]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [TAAKAANDUIDING...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p PADNAAM] [-dt] [NAAM...]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [PATROON...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d POSITIE] [N]   of:  history -anrw [BESTANDSNAAM]   of:  "
+"history -ps ARGUMENT..."
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr ""
+"jobs [-lnprs] [TAAKAANDUIDING...]   of:  jobs -x OPDRACHT [ARGUMENT...]"
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [TAAKAANDUIDING... | PID...] "
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s SIGNAALNAAM | -n SIGNAALNUMMER | -SIGNAAL] PID | TAAKAANDUIDING\n"
+"  of: kill -l [SIGNAAL]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let ARGUMENT..."
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a ARRAY] [-d SCHEIDINGSTEKEN] [-i TEKST] [-p PROMPT]\n"
+"           [-n AANTAL_TEKENS] [-N AANTAL_TEKENS] [-t TIJDSLIMIET]\n"
+"           [-u BESTANDSDESCRIPTOR]  [NAAM...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [N]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [--abefhkmnptuvxBCHP] [-o OPTIENAAM] [--] [ARGUMENT...]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [NAAM...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [NAAM[=WAARDE] ...]   of:  export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [NAAM[=WAARDE] ...]   of:  readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [N]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source BESTANDSNAAM [ARGUMENTEN]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". BESTANDSNAAM [ARGUMENTEN]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [EXPRESSIE]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ EXPRESSIE... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[ARGUMENT] SIGNAALAANDUIDING...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] NAAM..."
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [GRENSWAARDE]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [MODUS]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-fn] [ID ...]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [-n] [PID ...]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for NAAM [in WOORDEN...] ; do OPDRACHTEN; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( EXPR1; EXPR2; EXPR3 )); do OPDRACHTEN; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select NAAM [in WOORDEN... ;] do OPDRACHTEN; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] PIJPLIJN"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case WOORD in [PATROON [| PATROON]...) OPDRACHTEN ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if OPDRACHTEN; then OPDRACHTEN; [elif OPDRACHTEN; then OPDRACHTEN;]... [else "
+"OPDRACHTEN;] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while OPDRACHTEN; do OPDRACHTEN; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until OPDRACHTEN; do OPDRACHTEN; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [NAAM] OPDRACHT [OMLEIDINGEN]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function NAAM { OPDRACHTEN ; }   of:  NAAM () { OPDRACHTEN ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ OPDRACHTEN ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "TAAKAANDUIDING [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( EXPRESSIE ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ EXPRESSIE ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "var - namen en betekenissen van enkele shell-variabelen"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | MAP]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [OPTIENAAM...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v VARIABELE] OPMAAK [ARGUMENTEN]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o OPTIE] [-A ACTIE] [-C OPDRACHT]\n"
+"                   [-F FUNCTIE] [-G PATROON] [-P PREFIX] [-S SUFFIX]\n"
+"                   [-W WOORDENLIJST] [-X FILTERPATROON]  [NAAM...]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o OPTIE] [-A ACTIE] [-C OPDRACHT] [-F FUNCTIE]\n"
+"                 [-G PATROON] [-P PREFIX] [-S SUFFIX]\n"
+"                 [-W WOORDENLIJST] [-X FILTERPATROON]  [WOORD]"
+
+#: builtins.c:239
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o OPTIE] [-DEI] [NAAM...]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-d SCHEIDINGSTEKEN] [-n AANTAL] [-O BEGIN] [-s AANTAL] [-t]\n"
+"                 [-u BESTANDSDESCRIPTOR] [-C FUNCTIE] [-c HOEVEELHEID] "
+"[ARRAY]"
+
+#: builtins.c:244
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-d SCHEIDINGSTEKEN] [-n AANTAL] [-O BEGIN] [-s AANTAL] [-t]\n"
+"                 [-u BESTANDSDESCRIPTOR] [-C FUNCTIE] [-c HOEVEELHEID] "
+"[ARRAY]"
+
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Aliassen definiëren of tonen.\n"
+"\n"
+"    Zonder argumenten, of met optie '-p', toont 'alias' op standaarduitvoer\n"
+"    de huidige lijst van aliassen in de vorm: alias NAAM='VERVANGING'.\n"
+"    Met argumenten, wordt er een alias gedefinieerd voor elke NAAM waarvoor\n"
+"    een VERVANGING gegeven is.  Als de VERVANGING eindigt op een spatie, "
+"dan\n"
+"    wordt bij aliasexpansie ook van het nakomende woord gecontroleerd of "
+"het\n"
+"    een alias is.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij er een NAAM gegeven is waarvoor geen "
+"alias\n"
+"    gedefinieerd is."
+
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Elke gegeven NAAM verwijderen uit de lijst van gedefinieerde aliassen.\n"
+"\n"
+"    Met optie '-a' worden alle gedefinieerde aliassen verwijderd.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij NAAM geen bestaande alias is."
+
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"Toetsbindingen en variabelen van 'readline' instellen.\n"
+"\n"
+"    Verbindt een toetsenreeks aan een 'readline'-functie of aan een macro,\n"
+"    of stelt een 'readline'-variabele in.  De syntax van argumenten die "
+"geen\n"
+"    opties zijn is gelijkaardig aan die voor ~/.inputrc, maar zij dienen "
+"één\n"
+"    geheel te zijn, bijvoorbeeld: bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"\n"
+"    Opties:\n"
+"      -f BESTANDSNAAM    de toetsbindingen uit dit bestand lezen\n"
+"      -l                 alle bekende functienamen opsommen\n"
+"      -m TOETSENKAART    deze toetsenkaart gebruiken voor de duur van deze\n"
+"                           opdracht; mogelijke toetsenkaarten zijn 'emacs',\n"
+"                           'emacs-standard', 'emacs-meta', 'emacs-ctlx',\n"
+"                           'vi', 'vi-move', 'vi-insert' en 'vi-command'\n"
+"      -P                 functienamen en hun bindingen tonen\n"
+"      -p                 functienamen en hun bindingen tonen, in een vorm "
+"die\n"
+"                           hergebruikt kan worden als invoer\n"
+"      -r TOETSENREEKS    de binding voor deze toetsenreeks verwijderen\n"
+"      -q FUNCTIENAAM     tonen welke toetsen deze functie aanroepen\n"
+"      -S                 toetsenreeksen tonen die macro's aanroepen\n"
+"      -s                 toetsenreeksen tonen die macro's aanroepen, in een\n"
+"                           vorm die hergebruikt kan worden als invoer\n"
+"      -u FUNCTIENAAM     verwijdert alle toetsbindingen aan deze functie\n"
+"      -V                 variabelenamen en hun waarden tonen\n"
+"      -v                 variabelenamen en hun waarden tonen, in een vorm "
+"die\n"
+"                           hergebruikt kan worden als invoer\n"
+"      -x TOETSENREEKS:SHELL-OPDRACHT  deze shell-opdracht uitvoeren als "
+"deze\n"
+"                                        toetsenreeks ingevoerd wordt\n"
+"      -X                 met '-x' gebonden toetsenreeksen en opdrachten "
+"tonen\n"
+"                           in een vorm die hergebruikt kan worden als "
+"invoer\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij een ongeldige optie gegeven werd of er "
+"een\n"
+"    fout optrad."
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Een 'for'-, 'while'- of 'until'-lus beëindigen.\n"
+"\n"
+"    Als N gegeven is, dan worden N niveaus van lussen beëindigd.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij N kleiner dan 1 is."
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"De volgende herhaling van huidige 'for'-, 'while'- of 'until'-lus beginnen.\n"
+"    Als N gegeven is, dan wordt N niveaus hoger doorgegaan.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij N kleiner dan 1 is."
+
+#: builtins.c:354
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Een ingebouwde shell-functie uitvoeren.\n"
+"\n"
+"    Voert de gegeven ingebouwde shell-functie met de gegeven argumenten "
+"uit.\n"
+"    Dit is handig als u de naam van een ingebouwde functie voor een eigen\n"
+"    functie wilt gebruiken, maar toch de functionaliteit van de ingebouwde\n"
+"    functie nodig hebt.\n"
+"\n"
+"    De afsluitwaarde is die van de uitgevoerde shell-functie, of 1\n"
+"    of 1 als INGEBOUWDE_SHELLFUNCTIE geen ingebouwde shell-functie is."
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"De context van de aanroep van de huidige functie tonen.\n"
+"\n"
+"    Zonder argument produceert het \"$regelnummer $bestandsnaam\"; met\n"
+"    argument \"$regelnummer $functienaam $bestandsnaam\".  Deze tweede\n"
+"    vorm kan gebruikt worden om een 'stack trace' te produceren.  De\n"
+"    waarde van het argument geeft aan hoeveel frames er teruggegaan\n"
+"    moet worden; het huidige frame heeft nummer 0.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij de shell momenteel geen functie uitvoert\n"
+"    of EXPRESSIE ongeldig is."
+
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"De huidige map wijzigen.\n"
+"\n"
+"    Wijzigt de huidige map naar de gegeven MAP.  Als geen MAP gegeven is,\n"
+"    dan wordt de waarde van de variabele HOME gebruikt.\n"
+"\n"
+"    De variabele CDPATH definieert de mappen waarin naar MAP gezocht wordt.\n"
+"    De mapnamen in CDPATH worden gescheiden door dubbele punten (:); een\n"
+"    lege mapnaam is hetzelfde als de huidige map (.).  Als MAP begint met\n"
+"    een slash (/), dan wordt CDPATH niet gebruikt.\n"
+"\n"
+"    Als de gegeven map niet wordt gevonden, en shell-optie 'cdable_vars'\n"
+"    is ingeschakeld, dan wordt het gegeven woord als een variabelenaam\n"
+"    begrepen, en als die variabele een naam bevat, dan gaat 'cd' naar de\n"
+"    map met die naam.\n"
+"\n"
+"    Opties:\n"
+"      -L    symbolische koppelingen volgen; symbolische koppelingen in MAP\n"
+"              worden herleid ná verwerking van instantiaties van '..'\n"
+"      -P    de fysieke mappenstructuur gebruiken zonder symbolische "
+"koppelingen\n"
+"              te volgen; symbolische koppelingen in MAP worden herleid vóór\n"
+"              verwerking van instantiaties van '..'\n"
+"      -e    als optie '-P' gegeven is en de huidige map kan niet bepaald "
+"worden,\n"
+"              dan afsluiten met een niet-nul waarde\n"
+"      -@    een bestand met uitgebreide kenmerken presenteren als een map "
+"die\n"
+"              deze bestandskenmerken bevat (op systemen die het "
+"ondersteunen)\n"
+"\n"
+"    Standaard worden symbolische koppelingen gevolgd, alsof '-L' gegeven "
+"is.\n"
+"    Een '..' wordt verwerkt door het verwijderen van de direct voorafgaande\n"
+"    padcomponent terug tot een slash of tot het begin van MAP.\n"
+"\n"
+"    De afsluitwaarde is 0 als de gewenste map ingesteld kon worden, en als "
+"ook\n"
+"    omgevingsvariabele PWD ingesteld kon worden als '-P' gegeven is, anders "
+"1."
+
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"De naam van de huidige werkmap tonen.\n"
+"\n"
+"    Opties:\n"
+"      -L   de waarde van $PWD tonen (als het de huidige werkmap aangeeft)\n"
+"      -P   het werkelijke, fysieke pad tonen, zonder symbolische "
+"koppelingen\n"
+"\n"
+"    Zonder opties wordt optie '-L' aangenomen.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij een ongeldige optie gegeven werd of de\n"
+"    huidige map niet bepaald kon worden."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr "Doet niets; de opdracht heeft geen effect; de afsluitwaarde is 0."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr "Geeft afsluitwaarde 0, horend bij \"gelukt\"."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr "Geeft afsluitwaarde 1, horend bij \"mislukt\"."
+
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Een opdracht uitvoeren of informatie over een opdracht tonen.\n"
+"\n"
+"    Voert de gegeven opdracht uit met de gegeven argumenten, waarbij een\n"
+"    eventueel gelijknamige shell-functie genegeerd wordt.  Dit kan gebruikt\n"
+"    worden om een programma op schijf uit te voeren wanneer er een functie\n"
+"    met dezelfde naam bestaat.\n"
+"\n"
+"    Opties:\n"
+"      -p   een standaardwaarde voor PATH gebruiken, zodat alle\n"
+"             standaardprogramma's gegarandeerd gevonden worden\n"
+"      -v   tonen welke opdracht er uitgevoerd zou worden\n"
+"      -V   als '-v' maar gedetailleerder\n"
+"\n"
+"    De afsluitwaarde is die van de uitgevoerde OPDRACHT,\n"
+"    of 1 als de OPDRACHT niet gevonden is."
+
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"Waarden en eigenschappen van variabelen instellen.\n"
+"\n"
+"    Declareert de gegeven variabelen en/of kent hen eigenschappen toe.\n"
+"    Als er geen namen van variabelen gegeven zijn, dan worden de\n"
+"    bestaande variabelen en hun waarden getoond.\n"
+"\n"
+"    Opties:\n"
+"      -f   alleen de gedefinieerde functies tonen (geen variabelen)\n"
+"      -F   alleen de namen van de functies tonen, zonder de definities\n"
+"      -g   globale variabelen aanmaken wanneer gebruikt in een shell-"
+"functie;\n"
+"             elders genegeerd\n"
+"      -p   van elke gegeven variabele de eigenschappen en waarde tonen\n"
+"\n"
+"    Eigenschappen:\n"
+"      -a   van gegeven variabelen arrays maken (indien mogelijk)\n"
+"      -A   van gegeven variabelen associatieve arrays maken (indien "
+"mogelijk)\n"
+"      -i   aan gegeven variabelen de 'geheel getal'-eigenschap toekennen\n"
+"      -l   waarde van variabelen bij toekenning omzetten naar kleine "
+"letters\n"
+"      -n   de gegeven variabele een verwijzing maken naar de variabele die\n"
+"             gegeven is als waarde\n"
+"      -r   de gegeven variabelen alleen-lezen maken\n"
+"      -t   aan gegeven variabelen de 'trace'-eigenschap toekennen\n"
+"      -u   waarde van variabelen bij toekenning omzetten naar hoofdletters\n"
+"      -x   de gegeven variabelen exporteren\n"
+"\n"
+"    Een '+' in plaats van een '-' voor de letter schakelt de betreffende\n"
+"    eigenschap uit.\n"
+"\n"
+"    Bij variabelen met de 'geheel getal'-eigenschap wordt bij toewijzingen\n"
+"    een rekenkundige evaluatie gedaan (zie 'let').\n"
+"\n"
+"    Als 'declare' wordt gebruikt in een functie, dan maakt het elke gegeven\n"
+"    naam lokaal, net zoals de opdracht 'local'.  Optie '-g' onderdrukt dit.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij een ongeldige optie gegeven werd of er "
+"een\n"
+"    toekenningsfout optrad."
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"Waarden en eigenschappen van variabelen instellen.\n"
+"\n"
+"    Een synoniem van 'declare'.  Zie 'help declare'."
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Lokale variabelen definiëren.\n"
+"\n"
+"    Maakt een lokale variabele NAAM aan, en kent deze de waarde WAARDE toe.\n"
+"    OPTIE kan elke optie zijn die ook door 'declare' geaccepteerd wordt.\n"
+"\n"
+"    'local' kan alleen binnen een functie gebruikt worden, en zorgt ervoor\n"
+"    dat het geldigheidsbereik van de variabele NAAM beperkt wordt tot de\n"
+"    betreffende functie en diens dochters.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij een ongeldige optie gegeven werd, er een\n"
+"    toekenningsfout optrad, of de shell geen functie aan het uitvoeren is."
+
+#: builtins.c:557
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"De gegeven argumenten naar standaarduitvoer schrijven.\n"
+"\n"
+"    Schrijft de gegeven argumenten naar standaarduitvoer, elke twee "
+"gescheiden\n"
+"    door een spatie en aan het eind gevolgd door een nieuwe regel.\n"
+"\n"
+"    Opties:\n"
+"      -n   de afsluitende nieuwe regel onderdrukken\n"
+"      -e   onderstaande backslash-stuurcodes interpreteren\n"
+"      -E   onderstaande backslash-stuurcodes niet interpreteren\n"
+"\n"
+"    'echo' kent de volgende stuurcodes:\n"
+"      \\a     geluidssignaal\n"
+"      \\b     backspace\n"
+"      \\c     geen verdere uitvoer produceren\n"
+"      \\e     escapecode\n"
+"      \\E     escapecode\n"
+"      \\f     nieuwe pagina (FF-teken)\n"
+"      \\n     nieuwe regel (LF-teken)\n"
+"      \\r     naar begin van huidige regel (CR-teken)\n"
+"      \\t     horizontale tab\n"
+"      \\v     verticale tab\n"
+"      \\\\     een backslash (\\)\n"
+"      \\0NNN  het teken met ASCII-code NNN (octaal, 1 tot 3 cijfers)\n"
+"      \\xHH   het teken met code HH (hexadecimaal, 1 of 2 cijfers)\n"
+"      \\uHHHH      het Unicode-teken met code HHHH\n"
+"                   (hexadecimaal, 1 tot 4 cijfers)\n"
+"      \\UHHHHHHHH  het Unicode-teken met code HHHHHHHH\n"
+"                   (hexadecimaal, 1 tot 8 cijfers)\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij een schrijffout optrad."
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"De gegeven argumenten naar standaarduitvoer schrijven.\n"
+"\n"
+"    Schrijft de gegeven argumenten naar standaarduitvoer, gevolgd door een\n"
+"    nieuwe regel.  Optie '-n' onderdrukt deze afsluitende nieuwe regel.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij een schrijffout optrad."
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"Ingebouwde shell-opdrachten in- of uitschakelen.\n"
+"\n"
+"    Schakelt ingebouwde opdrachten in of uit.  Dit laatste maakt het "
+"mogelijk\n"
+"    om een bestand op schijf uit te voeren dat dezelfde naam heeft als een\n"
+"    ingebouwde opdracht, zonder het volledige pad op te moeten geven.\n"
+"\n"
+"    Opties:\n"
+"      -a   de ingebouwde opdrachten tonen en of ze in- of uitgeschakeld "
+"zijn\n"
+"      -n   genoemde opdrachten uitschakelen of uitgeschakelde opdrachten "
+"tonen\n"
+"      -p   uitvoer produceren die hergebruikt kan worden als invoer "
+"(standaard)\n"
+"      -s   alleen de speciale POSIX ingebouwde opdrachten tonen\n"
+"\n"
+"    Opties die het dynamisch laden besturen:\n"
+"      -f   ingebouwde opdracht NAAM laden uit gedeeld object BESTANDSNAAM\n"
+"      -d   opdracht die geladen is met '-f' verwijderen.\n"
+"\n"
+"    Zonder opties wordt elke gegeven NAAM ingeschakeld.  Zonder namen "
+"worden\n"
+"    de ingeschakelde opdrachten getoond (of met '-n' de uitgeschakelde).\n"
+"\n"
+"    Voorbeeld: om in plaats van de ingebouwde 'test' het bestand 'test' te\n"
+"    gebruiken dat zich in uw zoekpad PATH bevindt, typt u 'enable -n test'.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij NAAM geen ingebouwde shell-opdracht is of\n"
+"    er een fout optreedt."
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Argumenten uitvoeren als een shell-opdracht.\n"
+"\n"
+"    Combineert de gegeven argumenten tot een enkele tekenreeks, gebruikt "
+"deze\n"
+"    als invoer voor de shell, en voert de resulterende opdrachten uit.\n"
+"\n"
+"    De afsluitwaarde is die van de uitgevoerde opdracht, of 0 als de "
+"opdracht\n"
+"    leeg is."
+
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"Opties ontleden.\n"
+"\n"
+"    'getopts' kan door shell-scripts gebruikt worden om positionele "
+"parameters\n"
+"    als opties te ontleden.\n"
+"\n"
+"    De OPTIETEKENREEKS bevat de te herkennen optieletters; als een letter\n"
+"    gevolgd wordt door een dubbele punt, dan hoort de optie een argument\n"
+"    te hebben, ervan gescheiden door witruimte.\n"
+"\n"
+"    Elke keer dat 'getopts' wordt aangeroepen, plaatst het de volgende\n"
+"    gevonden optie in de gegeven shell-variabele NAAM, en het nummer van\n"
+"    het daarna te behandelen argument in de variabele OPTIND.  Deze OPTIND\n"
+"    wordt geïnitialiseerd op 1 elke keer als de shell of een shell-script\n"
+"    wordt aangeroepen.  Als een optie een argument heeft, dan wordt dat\n"
+"    argument in de shell-variabele OPTARG geplaatst.\n"
+"\n"
+"    'getopts' kan fouten op twee manieren rapporteren: in stille modus of\n"
+"    in normale modus.  Stille modus wordt gebruikt als het eerste teken\n"
+"    van de optietekenreeks een dubbele punt is.  In deze modus worden er\n"
+"    geen foutmeldingen geprint.  In stille modus geldt: als 'getopts' een\n"
+"    ongeldige optie vindt, wordt dat teken in OPTARG geplaatst; als een\n"
+"    vereist argument bij een optie ontbreekt, dan wordt een ':' in NAAM\n"
+"    geplaatst en de optieletter in OPTARG.  In normale modus geldt: als\n"
+"    'getopts' een ongeldige optie vindt, wordt een '?' in NAME geplaatst,\n"
+"    en OPTARG leeggemaakt; als een vereist argument ontbreekt, dan wordt\n"
+"    een ':' in NAAM geplaatst en de gevonden optieletter in OPTARG; in\n"
+"    beide gevallen wordt er ook een foutmelding geprint.\n"
+"\n"
+"    Als de shell-variabele OPTERR de waarde 0 heeft, wordt het printen\n"
+"    van foutmeldingen uitgeschakeld, zelfs als het eerste teken van de\n"
+"    optiereeks geen dubbele punt is.  De standaardwaarde van OPTERR is 1.\n"
+"\n"
+"    Normaliter ontleedt 'getopts' de positionele parameters: $0...$9.\n"
+"    Maar als er argumenten gegeven worden, dan worden deze ontleed."
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"De shell vervangen door de gegeven opdracht.\n"
+"\n"
+"    Voert de gegeven OPDRACHT uit, daarbij deze shell vervangend door dat\n"
+"    programma.  Eventuele ARGUMENTen worden de argumenten van OPDRACHT.\n"
+"    Als er geen OPDRACHT gegeven is, dan worden eventuele omleidingen van\n"
+"    kracht voor deze shell zelf.\n"
+"\n"
+"    Opties:\n"
+"      -a NAAM   deze naam als nulde argument aan OPDRACHT meegeven\n"
+"      -c        de opdracht uitvoeren met een lege omgeving\n"
+"      -l        een koppelteken als nulde argument aan OPDRACHT meegeven\n"
+"\n"
+"    Als de opdracht niet kan worden uitgevoerd, dan sluit een niet-"
+"interactieve\n"
+"    shell af, tenzij de shell-optie 'execfail' aan staat.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij OPDRACHT niet gevonden wordt of er een\n"
+"    omleidingsfout optreedt."
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"De shell beëindigen.\n"
+"\n"
+"    Beëindigt de shell met een afsluitwaarde van N.  Zonder N is de\n"
+"    afsluitwaarde die van de laatst uitgevoerde opdracht."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Een login-shell beëindigen.\n"
+"\n"
+"    Beëindigt een login-shell met een afsluitwaarde van N.  Geeft een\n"
+"    foutmelding als de huidige shell geen login-shell is."
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"Opdrachten uit de geschiedenis tonen of uitvoeren.\n"
+"\n"
+"    Kan gebruikt worden om oude opdrachten te tonen, of om deze te bewerken\n"
+"    en opnieuw uit te voeren.  EERSTE en LAATSTE kunnen getallen zijn die "
+"een\n"
+"    bereik opgeven, of EERSTE kan een tekenreeksje zijn waarmee de "
+"recentste\n"
+"    opdracht wordt bedoeld die met die letters begint.\n"
+"\n"
+"    Opties:\n"
+"      -e EDITORNAAM   de te gebruiken editor; standaard wordt de waarde van\n"
+"                        FCEDIT gebruikt, anders die van EDITOR, anders 'vi'\n"
+"       -l   een lijst met opdrachten tonen (in plaats van ze te bewerken)\n"
+"      -n   de lijst zonder nummers weergeven\n"
+"      -r   de volgorde van de lijst omdraaien (nieuwste eerst)\n"
+"\n"
+"    In de vorm 'fc -s [PATROON=VERVANGING]... [OPDRACHT]', wordt OPDRACHT\n"
+"    opnieuw uitgevoerd nadat de aangegeven vervangingen zijn gedaan.\n"
+"\n"
+"    Een handige alias bij deze functie is r='fc -s', zodat het typen van\n"
+"    'r' de laatste opdracht opnieuw uitvoert, en het typen van 'r cc' de\n"
+"    laatste opdracht die met 'cc' begon opnieuw uitvoert.\n"
+"\n"
+"    De afsluitwaarde die van de uitgevoerde opdracht, of 0, of niet-nul als\n"
+"    er een fout optreedt."
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"De gegeven taak in de voorgrond plaatsen.\n"
+"\n"
+"    Plaatst de gegeven taak in de voorgrond, en maakt deze tot de huidige "
+"taak.\n"
+"    Als er geen taak gegeven is, dan wordt dat wat volgens de shell de "
+"huidige\n"
+"    taak is gebruikt.\n"
+"\n"
+"    De afsluitwaarde is die van de in voorgrond geplaatste taak, of 1 als "
+"er\n"
+"    een fout optreedt."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"De gegeven taken in de achtergrond plaatsen.\n"
+"\n"
+"    Plaatst gegeven taken in de achtergrond, alsof deze gestart waren met "
+"'&'.\n"
+"    Als er geen taak gegeven is, dan wordt dat wat volgens de shell de "
+"huidige\n"
+"    taak is gebruikt.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij taakbeheer uitgeschakeld is of er een "
+"fout\n"
+"    optreedt."
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"Programmalocaties onthouden of tonen.\n"
+"\n"
+"    Bepaalt en onthoudt voor elke gegeven opdracht-NAAM het volledige pad.\n"
+"    Als er geen argumenten gegeven zijn, dan wordt informatie over de\n"
+"    onthouden paden getoond.\n"
+"\n"
+"    Opties:\n"
+"      -d           het pad van elke gegeven NAAM vergeten\n"
+"      -l           uitvoer produceren die herbruikbaar is als invoer\n"
+"      -p PADNAAM   te gebruiken PADNAAM van de opdracht NAAM\n"
+"      -r           alle paden vergeten\n"
+"      -t           voor elke gegeven naam het onthouden pad tonen\n"
+"\n"
+"    Elke gegeven NAAM wordt opgezocht in $PATH en wordt toegevoegd aan de\n"
+"    lijst met onthouden opdrachten.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij NAAM niet gevonden wordt of een ongeldige\n"
+"    optie gegeven werd."
+
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Informatie tonen over ingebouwde opdrachten.\n"
+"\n"
+"    Toont korte hulpteksten voor ingebouwde opdrachten van de shell.\n"
+"    Als een PATROON gegeven is, dan worden hulpteksten getoond voor alle\n"
+"    opdrachten die aan dit PATROON voldoen, anders wordt een lijst met\n"
+"    onderwerpen waarvoor hulp beschikbaar is getoond.\n"
+"\n"
+"    Opties:\n"
+"      -d   een korte omschrijving tonen voor elk onderwerp\n"
+"      -m   gebruiksbericht tonen in pseudo-opmaak van een man-pagina\n"
+"      -s   de uitvoer beperken tot een beknopt gebruiksbericht\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij niets aan PATROON voldoet of een "
+"ongeldige\n"
+"    optie gegeven werd."
+
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"De opdrachtengeschiedenis tonen of bewerken.\n"
+"\n"
+"    Geeft de lijst met uitgevoerde opdrachten weer (de \"geschiedenis\"),\n"
+"    inclusief regelnummers; voor bewerkte items staat een '*'.  Met een\n"
+"    argument van N worden alleen de laatste N opdrachten getoond.\n"
+"\n"
+"    Opties:\n"
+"      -c   huidige geschiedenis wissen: alle uitgevoerde opdrachten "
+"vergeten\n"
+"      -d POSITIE   het geschiedenisitem op deze positie verwijderen; een\n"
+"                   negatieve POSITIE telt terug vanaf het einde van de "
+"lijst\n"
+"\n"
+"      -a   huidige geschiedenis aan eind van geschiedenisbestand toevoegen\n"
+"      -n   alle nog niet gelezen regels uit het geschiedenisbestand lezen\n"
+"             en toevoegen aan het einde van huidige geschiedenis\n"
+"      -r   het geschiedenisbestand lezen en toevoegen aan het einde van\n"
+"             huidige geschiedenis\n"
+"      -w   huidige geschiedenis naar het geschiedenisbestand schrijven\n"
+"\n"
+"      -p   geschiedenisopzoeking uitvoeren voor elk ARGUMENT en het "
+"resultaat\n"
+"             tonen zonder dit in de geschiedenis op te slaan\n"
+"      -s   de ARGUMENTen als één enkel item aan de geschiedenis toevoegen\n"
+"\n"
+"    Als een BESTANDSNAAM gegeven is, dan wordt dat gebruikt als het\n"
+"    geschiedenisbestand, anders wordt de waarde van HISTFILE gebruikt, en\n"
+"    als die variabele leeg is, dan ~/.bash_history.\n"
+"\n"
+"    Als de variabele HISTTIMEFORMAT ingesteld en niet leeg is, dan wordt de\n"
+"    waarde ervan gebruikt als een opmaaktekenreeks for strftime(3), om een\n"
+"    tijdsstempel bij elk geschiedenisitem weer te geven.  Anders worden "
+"geen\n"
+"    tijdsstempels getoond.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij een ongeldige optie gegeven werd of er "
+"een\n"
+"    fout optrad."
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"De status van taken tonen.\n"
+"\n"
+"    Toont de actieve taken.  Een TAAKAANDUIDING beperkt de uitvoer tot "
+"alleen\n"
+"    die taak.  Zonder opties wordt de status van alle actieve taken "
+"getoond.\n"
+"\n"
+"    Opties:\n"
+"      -l   ook de proces-ID's tonen, naast de gewone informatie\n"
+"      -n   alleen processen tonen die sinds de vorige melding zijn "
+"veranderd\n"
+"      -p   alleen de proces-ID's tonen\n"
+"      -r   uitvoer beperken tot draaiende taken\n"
+"      -s   uitvoer beperken tot gepauzeerde taken\n"
+"\n"
+"    Als optie '-x' gegeven is, wordt de gegeven OPDRACHT uitgevoerd nadat\n"
+"    alle gegeven taken (in ARGUMENTen) afgesloten zijn (dat wil zeggen: hun\n"
+"    proces-ID is vervangen door dat van hun moederproces).\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij een ongeldige optie gegeven werd of er "
+"een\n"
+"    fout optrad.  Met optie '-x' is de afsluitwaarde die van OPDRACHT."
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"Taken uit de huidige shell verwijderen.\n"
+"\n"
+"    Verwijdert elke gegeven taak uit de tabel met actieve taken.  Zonder\n"
+"    een TAAKAANDUIDING wordt dat wat volgens de shell de huidige taak is\n"
+"    verwijderd.\n"
+"\n"
+"    Opties:\n"
+"      -a   alle taken verwijderen (als geen TAAKAANDUIDING gegeven is)\n"
+"      -h   taken niet verwijderen maar zodanig markeren dat deze geen "
+"SIGHUP\n"
+"             krijgen wanneer de shell een SIGHUP krijgt\n"
+"      -r   alleen draaiende taken verwijderen\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij een ongeldige optie of TAAKAANDUIDING\n"
+"    gegeven werd."
+
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Een signaal naar een taak sturen.\n"
+"\n"
+"    Stuurt de via PID of TAAKAANDUIDING aangeduide processen het gegeven\n"
+"    signaal.  Als er geen signaal gegeven is, dan wordt SIGTERM gestuurd.\n"
+"\n"
+"    Opties:\n"
+"      -n NAAM     het signaal met deze naam sturen\n"
+"      -s NUMMER   het signaal met dit nummer sturen\n"
+"      -l          lijst met beschikbare signalen tonen; als na '-l' "
+"argumenten\n"
+"                    volgen, dan wordt voor elk nummer de bijbehorende naam\n"
+"                    getoond, en voor elke naam het bijbehorende nummer\n"
+"      -L          synoniem van '-l'\n"
+"\n"
+"    'kill' is om  twee redenen een ingebouwde shell-opdracht: het "
+"accepteert\n"
+"    ook taakaanduidingen in plaats van alleen proces-ID's, en als het "
+"maximum\n"
+"    aantal processen bereikt is hoeft u geen nieuw proces te starten om een\n"
+"    ander proces te elimineren.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij een ongeldige optie gegeven werd of er "
+"een\n"
+"    fout optrad."
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"Rekenkundige uitdrukkingen evalueren.\n"
+"\n"
+"    Evalueert elk ARGUMENT als een rekenkundige uitdrukking.\n"
+"    De evaluatie gebeurt in gehele getallen zonder controle op overloop;\n"
+"    maar deling door nul wordt gedetecteerd en wordt getoond als een fout.\n"
+"\n"
+"    Onderstaande lijst toont de beschikbare operatoren in groepjes van "
+"gelijke\n"
+"    voorrang; de groepjes zijn gerangschikt volgens afnemende voorrang.\n"
+"\n"
+"        var++, var--    post-increment, post-decrement van variabele\n"
+"        ++var, --var    pre-increment, pre-decrement van variabele\n"
+"        -, +            eenzijdig minteken, eenzijdig plusteken\n"
+"        !, ~            logisch tegengestelde, bitsgewijs tegengestelde\n"
+"        **              machtsverheffing\n"
+"        *, /, %         vermenigvuldiging, deling, rest\n"
+"        +, -            optelling, aftrekking\n"
+"        <<, >>          bitsgewijze verschuiving naar links, naar rechts\n"
+"        <=, >=, <, >    vergelijkingen\n"
+"        ==, !=          gelijkheid, ongelijkheid\n"
+"        &               bitsgewijze AND\n"
+"        ^               bitsgewijze XOR\n"
+"        |               bitsgewijze OR\n"
+"        &&              logische AND\n"
+"        ||              logische OR\n"
+"\n"
+"        expr ? expr : expr    voorwaardelijke uitdrukking\n"
+"\n"
+"        =, *=, /=, %=, +=, -=, <<=, >>=,  &=, ^=, |=    toewijzingen\n"
+"\n"
+"    Shell-variabelen zijn toegestaan als parameters.  De naam van een "
+"variabele\n"
+"    wordt vervangen door zijn waarde (zonodig omgezet naar een geheel "
+"getal).\n"
+"    Variabelen hoeven geen 'geheel getal'-eigenschap te hebben om gebruikt "
+"te\n"
+"    kunnen worden in een expressie.\n"
+"\n"
+"    Operatoren worden geëvalueerd in volgorde van voorrang.  Subexpressies\n"
+"    tussen haakjes worden altijd eerst geëvalueerd en overstijgen zodoende\n"
+"    bovengenoemde voorrangsregels.\n"
+"\n"
+"    Als het laatste ARGUMENT evalueert tot 0, dan is de afsluitwaarde van\n"
+"    'let' 1; anders 0."
+
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"Een regel van standaardinvoer lezen en in velden opsplitsen.\n"
+"\n"
+"    Leest één regel van standaardinvoer (of van de gegeven "
+"bestandsdescriptor\n"
+"    als optie '-u' gegeven is) en wijst het eerste woord aan de eerste NAAM "
+"toe,\n"
+"    het tweede woord aan de tweede NAAM, en zo verder; de resterende "
+"woorden\n"
+"    worden toegewezen aan de laatste NAAM.  Alleen de tekens in de "
+"variabele\n"
+"    IFS worden herkend als woordscheidingstekens.  Als er geen namen "
+"gegeven\n"
+"    zijn, dan wordt de gelezen regel opgeslagen in de variabele REPLY.\n"
+"\n"
+"    Opties:\n"
+"      -a ARRAY   de gelezen woorden toekennen aan de opeenvolgende posities\n"
+"                   van het genoemde array, beginnend bij index nul\n"
+"      -d TEKEN   doorgaan met lezen tot TEKEN gelezen wordt (i.p.v. LF-"
+"teken)\n"
+"      -e         'readline' gebruiken om de regel in te lezen\n"
+"      -i TEKST   door 'readline' te gebruiken begintekst\n"
+"      -n AANTAL  stoppen na maximaal dit aantal tekens gelezen te hebben, "
+"of\n"
+"                   na een LF-teken (i.p.v. altijd te wachten op een LF-"
+"teken)\n"
+"      -N AANTAL  alleen stoppen na dit aantal tekens gelezen te hebben, of "
+"na\n"
+"                   EOF of tijdsoverschrijding, elk scheidingsteken negerend\n"
+"      -p PROMPT  deze tekenreeks tonen als prompt (zonder afsluitende "
+"nieuwe\n"
+"                   regel) alvorens te beginnen met lezen\n"
+"      -r         backslash-codes niet omzetten naar hun betekenis\n"
+"      -s         invoer die van een terminal komt niet echoën\n"
+"      -t AANTAL  na dit aantal seconden stoppen met wachten op invoer en\n"
+"                   afsluiten met een code groter dan 128; de waarde van de\n"
+"                   variabele TMOUT is de standaardwaarde voor het aantal te\n"
+"                   wachten seconden; het aantal mag drijvendepuntgetal "
+"zijn;\n"
+"                   als AANTAl 0 is, dan keert 'read' onmiddellijk terug "
+"zonder\n"
+"                   enige data te lezen, maar is alleen succesvol als er op "
+"de\n"
+"                   betreffende bestandsdescriptor invoer beschikbaar is\n"
+"      -u BS.DS.  van deze bestandsdescriptor lezen i.p.v. van "
+"standaardinvoer\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij einde-van-bestand (EOF) bereikt werd,\n"
+"    de tijdslimiet overschreden werd, er een toekenningsfout optrad, of een\n"
+"    ongeldige bestandsdescriptor als argument van '-u' gegeven werd."
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"Terugkeren uit een shell-functie.\n"
+"\n"
+"    Doet een functie of gesourced script afsluiten met afsluitwaarde N.\n"
+"    Zonder N is de afsluitwaarde die van de laatst uitgevoerde opdracht\n"
+"    in functie of script.\n"
+"\n"
+"    De afsluitwaarde is N, of 1 als de shell geen functie of script aan het\n"
+"    uitvoeren is."
+
+# Voor de duidelijkheid is de tekstvolgorde veranderd.
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"Waarden van shell-opties of positionele parameters instellen.\n"
+"\n"
+"    Schakelt shell-eigenschappen in/uit, of verandert waarden van "
+"positionele\n"
+"    parameters.  Zonder opties of argumenten toont 'set' de namen en "
+"waarden\n"
+"    van alle gedefinieerde variabelen en functies, in een vorm die als "
+"invoer\n"
+"    hergebruikt kan worden.  De volgende opties zijn beschikbaar (een '+' "
+"in\n"
+"    plaats van een '-' schakelt de betreffende eigenschap _uit_ i.p.v. in):\n"
+"\n"
+"      -a  nieuwe of gewijzigde variabelen en functies automatisch "
+"exporteren\n"
+"      -B  accoladevervanging uitvoeren (is standaard, b.v. a{b,c} -> ab ac)\n"
+"      -b  beëindiging van een taak direct melden (i.p.v. na huidige "
+"opdracht)\n"
+"      -C  omleiding van uitvoer mag gewone bestanden niet overschrijven\n"
+"      -E  een 'trap' op ERR door laten werken in functies en "
+"dochterprocessen\n"
+"      -e  de shell afsluiten zodra afsluitwaarde van een opdracht niet nul "
+"is\n"
+"      -f  jokertekens voor bestandsnamen uitschakelen (geen 'globbing')\n"
+"      -H  geschiedenisopdracht '!' beschikbaar stellen (standaard)\n"
+"      -h  het volledige pad van opdrachten onthouden na eerste keer "
+"opzoeken\n"
+"      -k  ook nakomende toewijzingen aan variabelen in de omgeving plaatsen\n"
+"      -m  taakbesturing beschikbaar stellen (standaard)\n"
+"      -n  opdrachten wel lezen maar niet uitvoeren (\"droogzwemmen\")\n"
+"      -o OPTIENAAM  deze optie inschakelen (zie verderop voor de lange "
+"namen)\n"
+"      -P  geen symbolische koppelingen herleiden bij opdrachten als 'cd' "
+"die\n"
+"          de huidige map wijzigen\n"
+"      -p  geprivilegeerde modus: de bestanden aangeduid door ENV en "
+"BASH_ENV\n"
+"          worden genegeerd, functies worden niet uit de omgeving "
+"geïmporteerd,\n"
+"          en ook eventuele SHELLOPTS worden genegeerd; modus wordt "
+"automatisch\n"
+"          ingeschakeld als effectieve en echte UID of GID niet "
+"overeenkomen;\n"
+"          uitschakelen maakt dan effectieve UID en GID gelijk aan de echte\n"
+"      -T  een 'trap' op DEBUG of RETURN door laten werken in functies en\n"
+"          dochterprocessen\n"
+"      -t  afsluiten na het lezen en uitvoeren van één opdracht\n"
+"      -u  het gebruik van niet-bestaande variabelen behandelen als een fout\n"
+"      -v  invoerregel weergeven (\"echoën\") zodra deze gelezen is\n"
+"      -x  elke opdracht met argumenten weergeven voordat deze wordt "
+"uitgevoerd\n"
+"      --  nakomende argumenten zijn positionele parameters; als er geen "
+"verdere\n"
+"          argumenten zijn, worden de bestaande positionele parameters "
+"gewist\n"
+"      -   opties -v en -x uitschakelen; nakomende argumenten zijn "
+"positionele\n"
+"          parameters; maar zonder argumenten worden de bestaande niet "
+"gewist\n"
+"\n"
+"    De opties kunnen ook gebruikt worden bij het starten van de shell.\n"
+"    De huidige toestand van de eigenschappen is te vinden in $-.  Eventuele\n"
+"    extra argumenten van 'set' worden begrepen als positionele parameters\n"
+"    en worden toegewezen aan $1, $2, ... $N.\n"
+"\n"
+"    De lange namen voor gebruik met optie -o (of +o) zijn:\n"
+"      allexport    == -a  (automatisch exporteren van nieuwen/gewijzigden)\n"
+"      braceexpand  == -B  (accoladevervanging uitvoeren)\n"
+"      emacs        regelbewerkingsinterface in stijl van 'emacs' gebruiken\n"
+"      errexit      == -e  (shell afsluiten bij eerste fout)\n"
+"      errtrace     == -E  ('trap' op ERR overal laten gelden)\n"
+"      functrace    == -T  ('trap' op DEBUG overal laten gelden)\n"
+"      hashall      == -h  (gevonden pad van opdrachten onthouden)\n"
+"      histexpand   == -H  ('!'-opdracht beschikbaar stellen)\n"
+"      history      opdrachtengeschiedenis beschikbaar stellen\n"
+"      ignoreeof    Ctrl-D negeren; de shell niet afsluiten bij lezen van "
+"EOF\n"
+"      interactive-comments  commentaar in interactieve opdrachten toestaan\n"
+"      keyword      == -k  (nakomende toewijzingen ook meenemen)\n"
+"      monitor      == -m  (taakbesturing beschikbaar stellen)\n"
+"      noclobber    == -C  (omleidingen geen bestanden laten overschrijven)\n"
+"      noexec       == -n  (opdrachten lezen maar niet uitvoeren)\n"
+"      noglob       == -f  (jokertekens uitschakelen)\n"
+"      nolog        (herkend maar genegeerd)\n"
+"      notify       == -b  (beëindiging van een taak direct melden)\n"
+"      nounset      == -u  (niet-bestaande variabelen als een fout "
+"beschouwen)\n"
+"      onecmd       == -t  (afsluiten na uitvoeren van één opdracht)\n"
+"      physical     == -P  (fysieke paden volgen i.p.v. symbolische)\n"
+"      pipefail     de afsluitwaarde van een pijplijn gelijkmaken aan die "
+"van\n"
+"                     de laatste niet-succesvolle opdracht in de reeks, of "
+"aan\n"
+"                     0 als alle opdrachten succesvol waren\n"
+"      posix        de voorschriften van de POSIX-standaard strict volgen\n"
+"      privileged   == -p  (geprivilegeerde modus)\n"
+"      verbose      == -v  (elke invoerregel echoën)\n"
+"      vi           regelbewerkingsinterface in stijl van 'vi' gebruiken\n"
+"      xtrace       == -x  (elke opdracht echoën)\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij een ongeldige optie gegeven werd."
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"Shell-variabelen en -functies verwijderen.\n"
+"\n"
+"    Verwijdert voor elke NAAM de bijbehorende variabele of functie.\n"
+"\n"
+"    Opties:\n"
+"      -f   elke NAAM als een shell-functie begrijpen\n"
+"      -v   elke NAAM als een shell-variabele begrijpen\n"
+"      -n   elke NAAM als een naamsverwijzing begrijpen en de variabele zelf\n"
+"           verwijderen in plaats de variabele waar naar verwezen wordt\n"
+"\n"
+"    Zonder opties zal 'unset' eerst een variabele proberen te verwijderen,\n"
+"    en als dat niet lukt, dan een functie.  Sommige variabelen kunnen niet\n"
+"    verwijderd worden; zie ook 'readonly'.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij een ongeldige optie gegeven werd of een\n"
+"    NAAM alleen-lezen is."
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"De export-eigenschap van shell-variabelen instellen.\n"
+"\n"
+"    Markeert elke gegeven naam voor automatische export naar de omgeving\n"
+"    van latere opdrachten.  Als een WAARDE gegeven is, dan wordt deze "
+"WAARDE\n"
+"    toegekend alvorens te exporteren.\n"
+"\n"
+"    Opties:\n"
+"      -f   gegeven namen verwijzen alleen naar functies\n"
+"      -n   voor de gegeven namen de exportmarkering juist verwijderen\n"
+"      -p   een lijst van alle geëxporteerde namen tonen\n"
+"\n"
+"    Het argument '--' schakelt verdere optieverwerking uit.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij een ongeldige optie of NAAM gegeven werd."
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Shell-variabelen als onveranderbaar markeren.\n"
+"\n"
+"    Markeert elke gegeven NAAM als alleen-lezen, zodat de waarde van deze\n"
+"    NAAM niet meer veranderd kan worden door een latere toewijzing.  Als "
+"een\n"
+"    WAARDE gegeven is, dan deze WAARDE toekennen alvorens deze te fixeren.\n"
+"\n"
+"    Opties:\n"
+"      -a   elke naam als een array begrijpen\n"
+"      -A   elke naam als een associatief array begrijpen\n"
+"      -f   gegeven namen verwijzen alleen naar functies\n"
+"      -p   een lijst tonen van alle onveranderbare variabelen of functies,\n"
+"             al naar gelang optie '-f' gegeven is\n"
+"\n"
+"    Het argument '--' schakelt verdere optieverwerking uit.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij een ongeldige optie of NAAM gegeven werd."
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"Positionele parameters opschuiven.\n"
+"\n"
+"    Hernoemt positionele parameters $N+1,$N+2,... naar $1,$2,...\n"
+"    Als N niet gegeven is, wordt de waarde 1 aangenomen.\n"
+"\n"
+"    De afsluitwaarde is 0 tenzij N negatief is of groter dan $#."
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Opdrachten uit bestand in de huidige shell uitvoeren.\n"
+"\n"
+"    Leest opdrachten uit het gegeven bestand en voert deze uit in de "
+"huidige\n"
+"    shell.  De mappen in PATH worden nagezocht om het genoemde bestand te\n"
+"    vinden.  Als er verder nog argumenten gegeven zijn, dan worden dit de\n"
+"    positionele parameters tijdens de uitvoering van het genoemde bestand.\n"
+"\n"
+"    De afsluitwaarde is die van de laatst uitgevoerde opdracht in het "
+"gegeven\n"
+"    bestand, of 1 als dit bestand niet gelezen kan worden."
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Uitvoering van de shell pauzeren.\n"
+"\n"
+"    Pauzeert de uitvoering van deze shell totdat een SIGCONT-signaal\n"
+"    ontvangen wordt.  Een login-shell kan niet gepauzeerd worden, tenzij\n"
+"    optie '-f' gegeven is.\n"
+"\n"
+"    Optie:\n"
+"      -f   pauzering afdwingen, ook als dit een login-shell is\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij taakbeheer uitgeschakeld is of er een "
+"fout\n"
+"    optreedt."
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"Een conditionele expressie evalueren.\n"
+"\n"
+"    Evalueert de gegeven EXPRESSIE; afhankelijk van het resultaat is de\n"
+"    afsluitwaarde 0 (\"waar\") of 1 (\"onwaar\").  De expressies kunnen\n"
+"    eenzijdig of tweezijdig zijn; eenzijdige expressies worden vaak\n"
+"    gebruikt om de toestand van een bestand te inspecteren.  Er zijn ook\n"
+"    operatoren voor tekenreeksen en voor getalsmatige vergelijkingen.\n"
+"\n"
+"    Het gedrag van 'test' is afhankelijk van het aantal argumenten.\n"
+"    Lees de handleiding van 'bash' voor een complete beschrijving.\n"
+"\n"
+"    Bestandsoperatoren:\n"
+"        -a BESTAND     waar als bestand bestaat\n"
+"        -b BESTAND     waar als bestand een blok-apparaat is\n"
+"        -c BESTAND     waar als bestand een byte-apparaat is\n"
+"        -d BESTAND     waar als bestand een map is\n"
+"        -e BESTAND     waar als bestand bestaat\n"
+"        -f BESTAND     waar als bestand een gewoon bestand is\n"
+"        -G BESTAND     waar als uw groep het bestand effectief bezit\n"
+"        -g BESTAND     waar als bestand SETGUID is\n"
+"        -h BESTAND     waar als bestand een symbolische koppeling is\n"
+"        -k BESTAND     waar als bestand \"sticky\"-bit aan heeft staan\n"
+"        -L BESTAND     waar als bestand een symbolische koppeling is\n"
+"        -N BESTAND     waar als bestand gewijzigd is sinds laatste lezing\n"
+"        -O BESTAND     waar als u het bestand effectief bezit\n"
+"        -p BESTAND     waar als bestand een benoemde pijp is\n"
+"        -r BESTAND     waar als bestand voor u leesbaar is\n"
+"        -S BESTAND     waar als bestand een socket is\n"
+"        -s BESTAND     waar als bestand niet leeg is\n"
+"        -t DESCRIPTOR  waar als bestandsdescriptor geopend is op een "
+"terminal\n"
+"        -u BESTAND     waar als bestand SETUID is\n"
+"        -w BESTAND     waar als bestand voor u schrijfbaar is\n"
+"        -x BESTAND     waar als bestand door u uitvoerbaar is\n"
+"\n"
+"      BEST1 -nt BEST2  waar als eerste bestand later gewijzigd is dan "
+"tweede\n"
+"      BEST1 -ot BEST2  waar als eerste bestand eerder gewijzigd is dan "
+"tweede\n"
+"      BEST1 -ef BEST2  waar als eerste bestand harde koppeling is naar "
+"tweede\n"
+"\n"
+"    Tekenreeksoperatoren:\n"
+"        -z REEKS       waar als tekenreeks leeg is\n"
+"        -n REEKS       waar als tekenreeks niet leeg is\n"
+"        REEKS          waar als tekenreeks niet leeg is\n"
+"      RKS1 = RKS2      waar als de tekenreeksen gelijk zijn\n"
+"      RKS1 != RKS2     waar als de tekenreeksen niet gelijk zijn\n"
+"      RKS1 < RKS2      waar als eerste reeks lexicografisch voor de tweede "
+"komt\n"
+"      RKS1 > RKS2      waar als eerste reeks lexicografisch na de tweede "
+"komt\n"
+"\n"
+"    Andere operatoren:\n"
+"        -o OPTIE       waar als deze shell-optie ingeschakeld is\n"
+"        -v VARIABELE   waar als deze variabele een waarde heeft\n"
+"        -R VARIABELE   waar als deze variabele een naamsverwijzing is\n"
+"        ! EXPRESSIE    waar als EXPRESSIE onwaar is\n"
+"      EXPR1 -a EXPR2   waar als beide expressies waar zijn\n"
+"      EXPR1 -o EXPR2   onwaar als beide expressies onwaar zijn\n"
+"      ARG1 VGL ARG2    waar als rekenkundige vergelijking klopt; VGL is één\n"
+"                       van de volgende: -eq, -ne, -lt, -le, -gt, -ge;\n"
+"                       ze betekenen: gelijk, ongelijk, kleiner dan,\n"
+"                       kleiner of gelijk, groter dan, groter of gelijk\n"
+"\n"
+"    De afsluitwaarde is 0 als EXPRESSIE waar is, 1 als EXPRESSIE onwaar is,\n"
+"    en 2 als een ongeldig argument gegeven werd."
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Een conditionele expressie evalueren.\n"
+"\n"
+"    Dit is een synoniem voor de ingebouwde functie 'test', behalve dat\n"
+"    het laatste argument een ']' moet zijn, horend bij de begin-'['."
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Procestijden tonen.\n"
+"\n"
+"    Geeft de totaal verbruikte gebruikers- en systeemtijd weer; eerst de\n"
+"    tijden verbruikt door de shell zelf, en daaronder de tijden verbruikt\n"
+"    door de processen uitgevoerd door de shell.\n"
+"\n"
+"    De afsluitwaarde is altijd 0."
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"Signalen en andere gebeurtenissen opvangen.\n"
+"\n"
+"    Definieert en activeert afhandelingsprocedures die uitgevoerd moeten\n"
+"    worden wanneer de shell een signaal of andere gebeurtenissen ontvangt.\n"
+"\n"
+"    ARGUMENT is een opdracht die gelezen en uitgevoerd wordt wanneer de "
+"shell\n"
+"    een van de opgegeven signalen ontvangt.  Als ARGUMENT ontbreekt en er "
+"één\n"
+"    signaal gegeven is, of wanneer ARGUMENT '-' is, dan worden de opgegeven\n"
+"    signalen teruggezet op de waarde die ze hadden bij het starten van deze\n"
+"    shell.  Als ARGUMENT de lege tekenreeks is, dan worden de opgegeven\n"
+"    signalen genegeerd door zowel deze shell als door alle "
+"dochterprocessen.\n"
+"\n"
+"    Als EXIT (0) als signaal opgegeven wordt, dan wordt ARGUMENT uitgevoerd\n"
+"    bij het afsluiten van de shell.  Als DEBUG als signaal opgegeven wordt,\n"
+"    dan wordt ARGUMENT uitgevoerd vóór elke enkelvoudige opdracht.  Als "
+"RETURN\n"
+"    als signaal opgegeven wordt, dan wordt ARGUMENT uitgevoerd elke keer "
+"als\n"
+"    een functie (of een met 'source' aangeroepen script) terugkeert.  Als "
+"ERR\n"
+"    als signaal opgegeven wordt, dan wordt ARGUMENT uitgevoerd elke keer "
+"als\n"
+"    de mislukking van een opdracht de shell zou beëindigen als optie '-e'\n"
+"    gegeven was.\n"
+"\n"
+"    Als er geen enkel argument gegeven is, dan toont 'trap' welke "
+"opdrachten\n"
+"    er met welke signalen verbonden zijn.\n"
+"\n"
+"    Opties:\n"
+"      -l   een overzicht tonen van signaalnummers en hun namen\n"
+"      -p   voor elk gegeven signaal tonen welke opdracht ermee verbonden is\n"
+"\n"
+"    Signalen kunnen als naam of als nummer opgegeven worden, in hoofd- of "
+"in\n"
+"    kleine letters, en het voorvoegsel 'SIG' is optioneel.  Merk op dat met\n"
+"    'kill -signaal $$' een signaal naar de huidige shell gestuurd kan "
+"worden.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij een ongeldige optie of SIGNAALAANDUIDING\n"
+"    gegeven werd."
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"Informatie tonen over een opdracht.\n"
+"\n"
+"    Toont voor elke gegeven NAAM hoe deze zou worden geïnterpreteerd als\n"
+"    deze als opdracht gebruikt zou worden.\n"
+"\n"
+"    Opties:\n"
+"     -a   alle plaatsen tonen met een uitvoerbaar bestand genaamd NAAM;\n"
+"            dit omvat aliassen, ingebouwde shell-opdrachten, functies,\n"
+"            sleutelwoorden, en bestanden op schijf (alleen zonder '-p')\n"
+"     -f   functies negeren, alsof ze niet gedefinieerd zijn\n"
+"     -P   naar elke gegeven naam zoeken in het huidige zoekpad (PATH), ook\n"
+"            als het een alias, ingebouwde shell-opdracht of functie is\n"
+"     -p   voor elke gegeven naam het volledige pad tonen van het bestand "
+"dat\n"
+"            uitgevoerd zou worden, of niets als er een alias, functie,\n"
+"            ingebouwde shell-opdracht of sleutelwoord met die naam is\n"
+"     -t   alleen het type van de opgegeven namen tonen: 'alias', 'builtin',\n"
+"            'file', 'function' of 'keyword', al naar gelang het een alias,\n"
+"            een ingebouwde shell-opdracht, een bestand op schijf, een\n"
+"            gedefinieerde functie of een sleutelwoord betreft; of niets\n"
+"            als de naam onbekend is\n"
+"\n"
+"    De afsluitwaarde is 0 als elke NAAM gevonden werd, anders 1."
+
+#: builtins.c:1431
+#, fuzzy
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Grenzen van hulpbronnen aanpassen.\n"
+"\n"
+"    Begrenst de beschikbare hulpbronnen voor processen gestart door deze "
+"shell\n"
+"    -- op systemen die zulke begrenzing toestaan.\n"
+"\n"
+"    Opties:\n"
+"      -S    een \"zachte\" hulpbrongrens gebruiken\n"
+"      -H    een \"harde\" hulpbrongrens gebruiken\n"
+"      -a    alle huidige begrenzingen tonen\n"
+"      -b    de maximum grootte van een socketbuffer\n"
+"      -c    de maximum grootte van een core-bestand (in kB)\n"
+"      -d    de maximum hoeveelheid gegevensgeheugen van een proces (in kB)\n"
+"      -e    de maximum procespriotiteit (de 'nice'-waarde)\n"
+"      -f    de maximum grootte van bestanden geschreven door shell of "
+"dochters\n"
+"      -i    het maximum aantal nog wachtende signalen\n"
+"      -l    de maximum hoeveelheid geheugen die een proces mag vastpinnen "
+"(kB)\n"
+"      -k    het maximum aantal gereserveerde kqueues voor dit proces\n"
+"      -m    de maximum hoeveelheid fysiek geheugen van een proces (in kB)\n"
+"      -n    het maximum aantal open bestandsdescriptors\n"
+"      -p    de maximum grootte van een pijpbuffer\n"
+"      -q    het maximum aantal bytes in POSIX berichtwachtrijen\n"
+"      -r    de maximum realtime-procesprioriteit\n"
+"      -s    de maximum stapelgrootte (in kB)\n"
+"      -t    de maximum hoeveelheid CPU-tijd (in seconden)\n"
+"      -u    het maximum aantal gebruikersprocessen\n"
+"      -v    de maximum hoeveelheid virtueel geheugen van een proces (in kB)\n"
+"      -x    het maximum aantal bestandsvergrendelingen\n"
+"      -P    het maximum aantal pseudoterminals\n"
+"      -T    het maximum aantal threads\n"
+"\n"
+"    Niet alle opties zijn beschikbaar op alle platformen.\n"
+"\n"
+"    Als een GRENSWAARDE opgegeven is, dan wordt dit de nieuwe waarde van de\n"
+"    aangegeven hulpbron, anders wordt de huidige waarde ervan getoond.\n"
+"    De speciale grenswaarden 'soft', 'hard' en 'unlimited' staan voor de\n"
+"    huidige zachte grens, de huidige harde grens, en onbegrensd.\n"
+"    Als geen optie gegeven is, dan wordt optie '-f' aangenomen.\n"
+"\n"
+"    De waardes gaan in stappen van 1024 bytes, behalve voor '-t', die in\n"
+"    seconden is, voor '-p', die in stappen van 512 bytes gaat, en voor '-"
+"u',\n"
+"    dat een ongeschaald aantal is.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij een ongeldige optie gegeven werd of er "
+"een\n"
+"    fout optrad."
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"Het bestandsaanmaakmasker tonen of instellen.\n"
+"\n"
+"    Stelt het bestandsaanmaakmasker van de gebruiker in op de gegeven "
+"MODUS.\n"
+"    Als MODUS ontbreekt, dan wordt de huidige waarde van het masker "
+"getoond.\n"
+"\n"
+"    Als MODUS begint met een cijfer, wordt het begrepen als een octaal "
+"getal,\n"
+"    anders als een symbolische modus-tekenreeks zoals chmod (1) die kent.\n"
+"\n"
+"    Opties:\n"
+"      -p   als invoer herbruikbare uitvoer produceren (indien MODUS "
+"ontbreekt)\n"
+"      -S   symbolische uitvoer produceren; anders octale getallen\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij MODUS ongeldig is of een ongeldige optie\n"
+"    gegeven werd."
+
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"Op taakafsluiting wachten en de afsluitwaarde rapporteren.\n"
+"\n"
+"    Wacht op elk proces aangeduid door een ID -- dat een taakaanduiding of\n"
+"    een proces-ID mag zijn -- en rapporteert diens afsluitwaarde.  Als geen "
+"ID\n"
+"    gegeven is, dan wordt er gewacht op alle actieve dochterprocessen, en "
+"is\n"
+"    de afsluitwaarde van 'wait' automatisch 0.  Als ID een taakaanduiding "
+"is,\n"
+"    dan wordt er gewacht op alle processen in de pijplijn van die taak.\n"
+"\n"
+"    Als optie '-n' gegeven is, dan wordt gewacht op de eerstvolgende "
+"voltooiing\n"
+"    van een taak en wordt diens afsluitwaarde geretourneerd.\n"
+"    \n"
+"    Als optie '-f' gegeven is, en taakbesturing is ingeschakeld, dan wordt\n"
+"    gewacht tot de taak met de gegeven ID beëindigd is, in plaats van te\n"
+"    wachten op een toestandswijziging.\n"
+"\n"
+"    De afsluitwaarde is die van de laatste ID, 1 als ID ongeldig is,\n"
+"    of 2 als een ongeldige optie gegeven werd."
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"Op procesafsluiting wachten en de afsluitwaarde rapporteren.\n"
+"\n"
+"    Wacht op elk proces aangeduid door een PID en rapporteert diens\n"
+"    afsluitwaarde.  Als geen PID gegeven is, dan wordt er gewacht op alle\n"
+"    momenteel actieve dochterprocessen, en is de afsluitwaarde van 'wait'\n"
+"    automatisch 0.  PID moet een proces-ID zijn.\n"
+"\n"
+"    De afsluitwaarde is die van de laatste PID, 1 als PID ongeldig is,\n"
+"    of 2 als een ongeldige optie gegeven werd."
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Opdrachten uitvoeren voor elk element in een lijst.\n"
+"\n"
+"    De 'for'-lus voert een reeks opdrachten uit voor elk element in een\n"
+"    lijst van items.  Als 'in WOORDEN...;' afwezig is, wordt 'in \"$@\";'\n"
+"    aangenomen.  Voor elk element in WOORDEN wordt NAAM gelijkgemaakt aan\n"
+"    dat element en worden de OPDRACHTEN uitgevoerd.\n"
+"\n"
+"    De afsluitwaarde is die van de laatst uitgevoerde opdracht."
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Een rekenkundige 'for'-lus.\n"
+"\n"
+"    Dit is het equivalent van:\n"
+"\n"
+"        (( EXP1 )); while (( EXP2 )); do OPDRACHTEN; (( EXP3 )); done\n"
+"\n"
+"    EXP1, EXP2, and EXP3 zijn rekenkundige expressies.  Als een expressie\n"
+"    weggelaten wordt, wordt de waarde 1 ervoor in de plaats genomen.\n"
+"\n"
+"    De afsluitwaarde is die van de laatst uitgevoerde opdracht."
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Een keuzelijst aanbieden en opdrachten uitvoeren.\n"
+"\n"
+"    Toont een menu op standaardfoutuitvoer: een genummerde lijst met de\n"
+"    gegeven woorden nadat alle shell-vervangingen erop zijn toegepast.\n"
+"    Als het 'in'-gedeelte afwezig is, wordt 'in \"$@\";' aangenomen.\n"
+"\n"
+"    Na het menu wordt de PS3-prompt getoond, en wordt een regel van\n"
+"    standaardinvoer gelezen.  Als de gelezen regel één van de getoonde\n"
+"    nummers is, dan wordt NAAM gelijkgemaakt aan het bijbehorende woord;\n"
+"    als de regel leeg is, worden het menu en de prompt opnieuw getoond;\n"
+"    als einde-van-bestand (Ctrl-D) wordt gelezen, dan wordt de opdracht\n"
+"    beëindigd.  Elke andere waarde zorgt ervoor dat de variabele NAAM\n"
+"    wordt leeggemaakt.  De gelezen regel wordt altijd opgeslagen in de\n"
+"    variabele REPLY.  Na elke keuze worden de bijbehorende opdrachten\n"
+"    uitgevoerd.  Dit gaat door totdat een 'break' de opdracht beëindigt.\n"
+"\n"
+"    De afsluitwaarde is die van de laatst uitgevoerde opdracht."
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"De door een pijplijn verbruikte tijd tonen.\n"
+"\n"
+"    Voert de in de PIJPLIJN gegeven opdrachten uit en toont daarna een\n"
+"    tijdssamenvatting: de totale verlopen tijd, de in gebruikersprocessen\n"
+"    verbruikte processortijd , en de in systeemprocessen verbruikte\n"
+"    processortijd.\n"
+"\n"
+"    De uitvoer kan via de omgevingsvariabele TIMEFORMAT aangepast worden.\n"
+"    Optie '-p' negeert deze omgevingsvariabele en toont de tijden in een\n"
+"    overdraagbare standaardopmaak.\n"
+"    De afsluitwaarde is die van de PIJPLIJN."
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Opdrachten uitvoeren afhankelijk van patroonovereenkomsten.\n"
+"\n"
+"    Voert één van de gegeven sets met opdrachten uit, afhankelijk van met\n"
+"    welk PATROON het WOORD overeenkomt.  Met '|' kunnen meerdere patronen\n"
+"    gegroepeerd worden.\n"
+"\n"
+"    De afsluitwaarde is die van de laatst uitgevoerde opdracht."
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Opdrachten uitvoeren afhankelijk van voorwaarden.\n"
+"\n"
+"    Voert eerst de opdrachten na 'if' uit; als de afsluitwaarde daarvan\n"
+"    nul is, dan worden de opdrachten na de eerste 'then' uitgevoerd; anders\n"
+"    de opdrachten na de eerstvolgende 'elif' (indien aanwezig) of de 'else'\n"
+"    (indien aanwezig).  Als de afsluitwaarde van de opdrachten na een "
+"'elif'\n"
+"    nul is, dan worden de opdrachten na de bijbehorende 'then' uitgevoerd.\n"
+"    Als er geen verdere 'elif' of 'else' meer is, of zodra de opdrachten na\n"
+"    een 'then' zijn uitgevoerd, is de 'if'-opdracht voltooid.\n"
+"\n"
+"    De afsluitwaarde van de gehele opdracht is die van de laatst "
+"uitgevoerde\n"
+"    deelopdracht, of nul als geen enkele 'if' of 'elif' nul opleverde."
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Opdrachten uitvoeren zolang een test slaagt.\n"
+"\n"
+"    Voert de gegeven opdrachten uit zolang de laatste opdracht achter\n"
+"    'while' een afsluitwaarde van 0 heeft.\n"
+"\n"
+"    De afsluitwaarde is die van de laatst uitgevoerde opdracht."
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Opdrachten uitvoeren zolang een test niet slaagt.\n"
+"\n"
+"    Voert de gegeven opdrachten uit zolang de laatste opdracht achter\n"
+"    'until' een afsluitwaarde ongelijk aan 0 heeft.\n"
+"\n"
+"    De afsluitwaarde is die van de laatst uitgevoerde opdracht."
+
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"Een co-proces aanmaken genaamd NAAM.\n"
+"\n"
+"    Voert OPDRACHT asynchroon uit, met standaardinvoer en -uitvoer via\n"
+"    een pijp verbonden met bestandsdescriptors die toegewezen zijn aan\n"
+"    indices 0 en 1 van array-variabele NAAM in de uitvoerende shell.\n"
+"    De standaard-NAAM is \"COPROC\".\n"
+"\n"
+"    De afsluitwaarde van coproc is 0."
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"Een shell-functie definiëren.\n"
+"\n"
+"    Maakt een shell-functie aan die met NAAM aangeroepen kan worden en die\n"
+"    de gegeven OPDRACHTEN uitvoert in de context van de aanroepende shell.\n"
+"    Wanneer NAAM aangeroepen wordt, worden de argumenten aan de functie\n"
+"    doorgegeven als $0...$N, en de functienaam in $FUNCNAME.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij NAAM onveranderbaar is."
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Opdrachten als een eenheid groeperen.\n"
+"\n"
+"    Voert een set opdrachten als een eenheid uit.  Dit is een manier om\n"
+"    de in- en uitvoer van een hele set opdrachten om te kunnen leiden.\n"
+"\n"
+"    De afsluitwaarde is die van de laatst uitgevoerde opdracht."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"Een taak hervatten in de voorgrond.\n"
+"\n"
+"    Hervat de gegeven achtergrondtaak of gepauzeerde taak in de voorgrond.\n"
+"    Dit is equivalent aan de opdracht 'fg'.  De taak kan met een nummer of\n"
+"    met een naam aangeduid worden.\n"
+"\n"
+"    Als na de taakaanduiding een '&' volgt, dan wordt de taak in de\n"
+"    achtergrond geplaatst.  Dit is equivalent aan de opdracht 'bg'.\n"
+"\n"
+"    De afsluitwaarde is die van de hervatte taak."
+
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Een rekenkundige uitdrukking evalueren.\n"
+"\n"
+"    Evalueert de gegeven expressie als een rekenkundige uitdrukking.\n"
+"    Dit is equivalent aan 'let EXPRESSIE'.\n"
+"\n"
+"    De afsluitwaarde is 1 als de EXPRESSIE tot 0 evalueert; anders 0."
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"Een voorwaardelijke opdracht uitvoeren.\n"
+"\n"
+"    Evalueert de gegeven conditionele expressie; afhankelijk van het "
+"resultaat\n"
+"    is de afsluitwaarde 0 (\"waar\") of 1 (\"onwaar\").  De expressies "
+"bestaan uit\n"
+"    dezelfde basiscomponenten als die van ingebouwde opdracht 'test', en "
+"kunnen\n"
+"    worden gecombineerd met de volgende operatoren:\n"
+"\n"
+"        ( EXPRESSIE )     de waarde van de gegeven expressie\n"
+"        ! EXPRESSIE       waar als EXPRESSIE onwaar is, anders onwaar\n"
+"        EXPR1 && EXPR2    waar als beide expressies waar zijn, anders "
+"onwaar\n"
+"        EXPR1 || EXPR2    onwaar als beide expressies onwaar zijn, anders "
+"waar\n"
+"\n"
+"    Als '==' of '!=' als operator gebruikt wordt, dan wordt de rechter\n"
+"    tekenreeks als patroon begrepen en wordt patroonherkenning uitgevoerd.\n"
+"    Als '=~' als operator gebruikt wordt, dan wordt de rechter tekenreeks\n"
+"    als een reguliere expressie begrepen.\n"
+"\n"
+"    De operatoren '&&' en '||' evalueren de tweede expressie níét als de "
+"waarde\n"
+"    van de eerste voldoende is om het eindresulaat te bepalen.\n"
+"\n"
+"    De afsluitwaarde is 0 of 1, afhankelijk van EXPRESSIE."
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"De betekenis van enkele algemene shell-variabelen.\n"
+"\n"
+"    Hieronder volgt de beschrijving van een aantal variabelen.  (In elke\n"
+"    lijst worden de elementen van elkaar gescheiden door dubbele punten.)\n"
+"\n"
+"    BASH_VERSION  versie-informatie van deze 'bash'\n"
+"    CDPATH        lijst van mappen om te doorzoeken wanneer het argument "
+"van\n"
+"                    'cd' niet in de huidige map voorkomt\n"
+"    GLOBIGNORE    lijst van patronen die de bestandsnamen beschrijven die "
+"bij\n"
+"                    bestandsnaamjokertekenexpansie genegeerd moeten worden\n"
+"    HISTFILE      naam van het bestand dat uw opdrachtengeschiedenis bevat\n"
+"    HISTFILESIZE  maximum aantal regels dat geschiedenisbestand mag "
+"bevatten\n"
+"    HISTIGNORE    lijst van patronen die niet in geschiedenis moeten komen\n"
+"    HISTSIZE      maximum aantal geschiedenisregels dat huidige shell "
+"gebruikt\n"
+"    HOME          het volledige pad naar uw thuismap\n"
+"    HOSTNAME      de naam van de computer waarop deze 'bash' wordt "
+"uitgevoerd\n"
+"    HOSTTYPE      de soort CPU waarop deze 'bash' wordt uitgevoerd\n"
+"    IGNOREEOF     het aantal te negeren Ctrl-D's alvorens de shell afsluit\n"
+"    MACHTYPE      de soort machine waarop deze 'bash' wordt uitgevoerd\n"
+"    MAILCHECK     hoe vaak (in seconden) 'bash' controleert op nieuwe mail\n"
+"    MAILPATH      lijst van bestandsnamen die 'bash' controleert op nieuwe "
+"mail\n"
+"    OSTYPE        de soort Unix waarop deze 'bash' wordt uitgevoerd\n"
+"    PATH          lijst van mappen waar opdrachten in gezocht moeten worden\n"
+"    PROMPT_COMMAND  uit te voeren opdracht vóór het tonen van primaire "
+"prompt\n"
+"    PS1           tekenreeks die primaire prompt beschrijft\n"
+"    PS2           tekenreeks die secundaire prompt beschrijft (standaard '> "
+"')\n"
+"    PWD           het volledige pad van de huidige map\n"
+"    SHELLOPTS     lijst van ingeschakelde shell-opties\n"
+"    TERM          soortnaam van de huidige terminal\n"
+"    TIMEFORMAT    opmaakvoorschrift voor de uitvoer van 'time'\n"
+"    auto_resume   niet-leeg betekent dat één opdrachtwoord op de "
+"opdrachtregel\n"
+"                    eerst opgezocht wordt in de lijst van gepauzeerde "
+"taken,\n"
+"                    en indien daar gevonden, dan wordt die taak in de "
+"voorgrond\n"
+"                    geplaatst; de waarde 'exact' betekent dat het gegeven "
+"woord\n"
+"                    exact moet overeenkomen met een opdracht in de lijst "
+"van\n"
+"                    gepauzeerde taken; de waarde 'substring' betekent dat "
+"een\n"
+"                    overeenkomst met een deeltekenreeks voldoende is; elke\n"
+"                    andere waarde betekent dat het gegeven woord aan het "
+"begin\n"
+"                    moet staan van de opdracht van een gepauzeerde taak\n"
+"    histchars     tekens die geschiedenisexpansie en -vervanging besturen;\n"
+"                    het eerste teken is het geschiedenisvervangingsteken,\n"
+"                    gewoonlijk '!'; het tweede teken is het snelle\n"
+"                    vervangingsteken, gewoonlijk '^'; het derde teken is "
+"het\n"
+"                    geschiedeniscommentaarteken, gewoonlijk '#'\n"
+
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Mappen aan de mappenstapel toevoegen.\n"
+"\n"
+"    Voegt een map toe aan de top van de mappenstapel, of roteert de stapel\n"
+"    en maakt de huidige werkmap gelijk aan de nieuwe top van de stapel.\n"
+"    Zonder argumenten worden de bovenste twee mappen verwisseld.\n"
+"\n"
+"    Optie:\n"
+"      -n   onderdrukt de verandering van map bij het toevoegen van mappen\n"
+"             aan de stapel, zodat enkel de stapel wordt gemanipuleerd\n"
+"\n"
+"    Argumenten:\n"
+"      MAP  Voegt deze map toe aan de top van de mappenstapel, het de nieuwe\n"
+"           werkmap makend.\n"
+"      +N   Roteert de stapel zodat de N-de map (tellend vanaf links, van\n"
+"           de lijst getoond door 'dirs', beginned bij nul) bovenaan komt.\n"
+"      -N   Roteert de stapel zodat de N-de map (tellend vanaf rechts, van\n"
+"           de lijst getoond door 'dirs', beginned bij nul) bovenaan komt.\n"
+"\n"
+"    De opdracht 'dirs' toont de huidige mappenstapel.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij een ongeldig argument gegeven werd of de\n"
+"    mapwijziging mislukte."
+
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Mappen van de mappenstapel verwijderen.\n"
+"\n"
+"    Verwijdert items van de mappenstapel.  Zonder argumenten verwijdert\n"
+"    het de bovenste map van de stapel, en maakt de huidige werkmap\n"
+"    gelijk aan de nieuwe bovenste map.\n"
+"\n"
+"    Optie:\n"
+"      -n   onderdrukt de verandering van map bij het toevoegen van mappen\n"
+"             aan de stapel, zodat enkel de stapel wordt gemanipuleerd\n"
+"\n"
+"    Argumenten:\n"
+"      +N   Verwijdert het N-de item tellend vanaf links (van de lijst\n"
+"           getoond door 'dirs', beginnend met nul).  Bijvoorbeeld:\n"
+"           'popd +0' verwijdert de eerste map, 'popd +' de tweede.\n"
+"      -N   Verwijdert het N-de item tellend vanaf rechts (van de lijst\n"
+"           getoond door 'dirs', beginnend met nul).  Bijvoorbeeld:\n"
+"           'popd -0' verwijdert de laatste map, 'popd -1' de voorlaatste.\n"
+"\n"
+"    De opdracht 'dirs' toont de huidige mappenstapel.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij een ongeldig argument gegeven werd of de\n"
+"    mapwijziging mislukte."
+
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"De mappenstapel tonen.\n"
+"\n"
+"    Toont de huidige lijst van onthouden mappen.  Mappen worden aan deze\n"
+"    lijst toegevoegd met de opdracht 'pushd', en verwijderd met 'popd'.\n"
+"\n"
+"    Opties:\n"
+"      -c   de mappenstapel wissen door alle elementen te verwijderen\n"
+"      -l   paden volledig tonen, niet afgekort ten opzichte van uw thuismap\n"
+"      -p   de mappenstapel tonen met één item per regel\n"
+"      -v   als '-p', maar met elk item voorafgegeaan wordt door zijn "
+"positie\n"
+"             in de stapel\n"
+"\n"
+"    Argumenten:\n"
+"      +N   Het N-de item tonen, tellend vanaf links, van de lijst getoond\n"
+"           door 'dirs' wanneer opgeroepen zonder opties, beginnend bij nul.\n"
+"      -N   Het N-de item tonen, tellend vanaf rechts, van de lijst getoond\n"
+"           door 'dirs' wanneer opgeroepen zonder opties, beginnend bij nul.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij een ongeldige optie gegeven werd of er "
+"een\n"
+"    fout optrad."
+
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"Shell-opties in- of uitschakelen.\n"
+"\n"
+"    Stelt de waarde in van elke gegeven OPTIENAAM -- van een shell-optie\n"
+"    die bepaald shell-gedrag beïnvloedt.  Zonder opties wordt elke gegeven\n"
+"    OPTIENAAM getoond, of alle shell-opties als geen OPTIENAAM gegeven is,\n"
+"    met bij elke optie de vermelding of deze al dan niet ingeschakeld is.\n"
+"\n"
+"    Opties:\n"
+"      -o   de verzameling mogelijke OPTIENAMEN naar diegene die "
+"gedefinieerd\n"
+"             zijn voor gebruik met 'set -o'\n"
+"      -p   uitvoer produceren die herbruikbaar is als invoer\n"
+"      -q   uitvoer onderdrukken\n"
+"      -s   elke gegeven OPTIENAAM inschakelen\n"
+"      -u   elke gegeven OPTIENAAM uitschakelen\n"
+"\n"
+"    Zonder opties (of met alleen '-q') is de afsluitwaarde 0 indien "
+"OPTIENAAM\n"
+"    ingeschakeld is, 1 indien uitgeschakeld.  De afsluitwaarde is ook 1 als\n"
+"    een ongeldige optienaam gegeven werd, en de afsluitwaarde is 2 als een\n"
+"    ongeldige optie gegeven werd."
+
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"Argumenten volgens een opmaakvoorschrift opmaken en printen.\n"
+"\n"
+"    Print de gegeven ARGUMENTEN, opgemaakt volgens de gegeven OPMAAK.\n"
+"\n"
+"    Optie:\n"
+"      -v VAR   de uitvoer in de variabele VAR plaatsen in plaats van deze\n"
+"                 naar standaarduitvoer te sturen\n"
+"\n"
+"    De OPMAAK-tekenreeks bestaat uit drie soorten tekens: gewone tekens,\n"
+"    die simpelweg naar standaarduitvoer gekopieerd worden; stuurtekens,\n"
+"    die omgezet worden en dan naar standaarduitvoer gekopieerd worden;\n"
+"    en opmaaksymbolen, die elk steeds het volgende argument doen printen.\n"
+"\n"
+"    Naast de standaard %-opmaaksymbolen van printf(1), \"diouxXfeEgGcs\",\n"
+"    betekent %b dat de backslash-stuurtekens in het betreffende argument\n"
+"    omgezet moeten worden, en betekent %q dat het argument op zo'n manier\n"
+"    aangehaald moet worden dat het als invoer voor de shell hergebruikt\n"
+"    kan worden.  Verder betekent %(OPMAAK)T dat datum-plus-tijd getoond\n"
+"    moet worden door deze opmaak aan strftime(3) mee te geven.\n"
+"\n"
+"    De gegeven opmaak wordt zo vaak hergebruikt als nodig is om alle "
+"argumenten\n"
+"    te consumeren.  Als er minder argumenten zijn dan de opmaak verwacht, "
+"dan\n"
+"    gedragen de overtollige opmaakspecificaties zich alsof (al naar gelang) "
+"de\n"
+"    waarde nul of een lege tekenreeks gegeven werd.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij een ongeldige optie gegeven werd of er "
+"een\n"
+"    schrijf- of toekenningsfout optrad."
+
+#: builtins.c:1971
+#, fuzzy
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Aangeven hoe argumenten door 'readline' gecompleteerd moeten worden.\n"
+"\n"
+"    Geeft voor elke gegeven NAAM aan hoe de argumenten gecompleteerd dienen\n"
+"    te worden.  Zonder opties worden de bestaande "
+"completeringsvoorschriften\n"
+"    getoond (in een vorm die als invoer hergebruikt kan worden).\n"
+"\n"
+"    Opties:\n"
+"      -p   bestaande completeringsvoorschriften in herbruikbare vorm tonen\n"
+"      -r   elk genoemd voorschrift verwijderen, of alle voorschriften als\n"
+"             geen NAAM gegeven is\n"
+"      -D   de gegeven completeringen en acties als standaard nemen voor\n"
+"             opdrachten die geen specifieke eigen completering hebben\n"
+"      -E   de gegeven completeringen en acties als standaard nemen voor\n"
+"             lege opdrachten -- de completering van een lege regel\n"
+"      -I   de gegeven completeringen en acties als standaard nemen voor\n"
+"             een initieel woord (gewoonlijk een opdracht)\n"
+"\n"
+"    Als completering geprobeerd wordt, dan worden de acties toegepast in\n"
+"    de volgorde van de bovenstaande hoofdletteropties.  Optie '-D' gaat\n"
+"    voor optie '-E', en beide gaan voor '-I'\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij een ongeldige optie gegeven werd of er "
+"een\n"
+"    fout optrad."
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"De mogelijke completeringen tonen, afhankelijk van de gegeven opties.\n"
+"\n"
+"    Bedoeld voor gebruik binnen een functie die mogelijke completeringen\n"
+"    genereert.  Als het optionele argument WOORD aanwezig is, worden alleen\n"
+"    de daarbij passende completeringen gegenereerd.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij een ongeldige optie gegeven werd of er "
+"een\n"
+"    fout optrad."
+
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"Completeringsopties wijzigen of tonen.\n"
+"\n"
+"    Wijzigt de completeringsopties van elke gegeven NAAM, of als geen NAAM\n"
+"    gegeven is, die van de huidige completering.  Als geen OPTIE gegeven "
+"is,\n"
+"    dan worden de completeringsopties van elke gegeven NAAM getoond, of die\n"
+"    van de huidige completering.\n"
+"\n"
+"    Opties:\n"
+"      -o OPTIE   deze completeringsoptie inschakelen voor elke gegeven NAAM\n"
+"      -D         opties wijzigen voor de standaardcompletering\n"
+"      -E         opties wijzigen voor de completering van een lege opdracht\n"
+"      -I         opties wijzigen voor de completering van initieel woord\n"
+"\n"
+"    Het gebruik van '+o' i.p.v. '-o' schakelt de betreffende optie _uit_.\n"
+"\n"
+"    Elke NAAM dient te refereren aan een opdracht waarvoor reeds een\n"
+"    completeringsvoorschrift gedefinieerd is via de opdracht 'complete'.\n"
+"    Als geen NAAM gegeven is, dan dient 'compopt' aangeroepen te worden "
+"door\n"
+"    een functie die momenteel completeringen genereert; dan worden de "
+"opties\n"
+"    voor die draaiende completeringsgenerator gewijzigd.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij een ongeldige optie gegeven werd of voor\n"
+"    NAAM geen completeringsvoorschrift gedefinieerd is."
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"Regels inlezen in een geïndexeerde array-variabele.\n"
+"\n"
+"    Leest regels van standaardinvoer in in de array-variabele ARRAY.\n"
+"    De variabele MAPFILE wordt gebruikt als geen ARRAY gegeven is.\n"
+"\n"
+"    Opties:\n"
+"      -d TEKEN     dit teken (i.p.v. LF) gebruiken als einde van regel\n"
+"      -n AANTAL    maximaal dit aantal regels kopiëren (0 = alles)\n"
+"      -O BEGIN     met toekennen beginnen bij deze index (standaard 0)\n"
+"      -s AANTAL    dit aantal regels overslaan\n"
+"      -t           nieuweregelteken aan eind van elke gelezen regel "
+"verwijderen\n"
+"      -u BES.DES.  uit deze bestandsdescriptor lezen i.p.v. uit "
+"standaardinvoer\n"
+"      -C FUNCTIE   deze functie evalueren na elke HOEVEELHEID regels\n"
+"      -c HOEVEELHEID  het aantal te lezen regels voor elke aanroep van "
+"FUNCTIE\n"
+"\n"
+"    Argument:\n"
+"      ARRAY        naam van array-variabele waarin regels ingelezen moeten "
+"worden\n"
+"\n"
+"    Als '-C' gegeven is zonder '-c', is de standaard-HOEVEELHEID 5000.\n"
+"    Wanneer FUNCTIE aangeroepen wordt, dan wordt hieraan de index van het\n"
+"    volgende array-element en de daaraan toe te kennen regel als extra\n"
+"    argumenten meegegeven.\n"
+"\n"
+"    Als geen expliciet BEGIN gegeven is, wordt het array gewist alvorens\n"
+"    met toekennen te beginnen.\n"
+"\n"
+"    De afsluitwaarde is 0, tenzij ARRAY alleen-lezen is of geen array is, "
+"of\n"
+"    een ongeldige optie gegeven werd."
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Regels inlezen vanuit een bestand in een array-variabele.\n"
+"\n"
+"    Een synoniem voor 'mapfile'."
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "De context geven van de huidige functie-aanroep.\n"
+#~ "\n"
+#~ "    Zonder EXPR, resulteert "
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process(): proces %5ld (%s) in de pijplijn"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "Onbekend signaalnummer"
+
+# Dit is een commandonaam.
+#~ msgid "true"
+#~ msgstr "true"
+
+# Dit is een commandonaam.
+#~ msgid "false"
+#~ msgstr "false"
+
+# Dit is een commandonaam.
+#~ msgid "times"
+#~ msgstr "times"
+
+#~ msgid ""
+#~ "License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl."
+#~ "html>\n"
+#~ msgstr ""
+#~ "De licentie is GPLv2+: GNU GPL versie 2 of later.\n"
+#~ "Zie http://gnu.org/licenses/gpl.html voor de volledige tekst.\n"
diff --git a/po/pl.gmo b/po/pl.gmo
new file mode 100644
index 0000000..be60e28
--- /dev/null
+++ b/po/pl.gmo
diff --git a/po/pl.po b/po/pl.po
new file mode 100644
index 0000000..af6bfbd
--- /dev/null
+++ b/po/pl.po
@@ -0,0 +1,5989 @@
+# Polish translation of bash
+# Copyright (C) 2007, 2010, 2011, 2013, 2014, 2015, 2016, 2018, 2019 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+# Andrzej M. Krzysztofowicz <ankry@mif.pg.gda.pl> 2006,2007.
+# Jakub Bogusz <qboosh@pld-linux.org> 2010-2019.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: bash 5.0\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2019-01-08 21:45+0100\n"
+"Last-Translator: Jakub Bogusz <qboosh@pld-linux.org>\n"
+"Language-Team: Polish <translation-team-pl@lists.sourceforge.net>\n"
+"Language: pl\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
+"|| n%100>=20) ? 1 : 2);\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "nieprawidłowy indeks tablicy"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr "%s: usuwanie atrybutu nameref"
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: nie można przekształcić tablicy indeksowanej na asocjacyjną"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: błędny klucz tablicy asocjacyjnej"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: nie można przypisać do nienumerycznego indeksu"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr "%s: %s: przy przypisaniu do tablicy asocjacyjnej należy użyć nawiasów"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: nie można utworzyć: %s"
+
+# ???
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr ""
+"bash_execute_unix_command: nie można znaleźć mapy klawiszy dla polecenia"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: pierwszym drukowalnym znakiem nie jest `\"'"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "brak zamykajÄ…cego `%c' w %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: brak separujÄ…cego dwukropka"
+
+# ???
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "`%s': nie można usunąć dowiązania"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr "rozwijanie nawiasów: nie można przydzielić pamięci dla %s"
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr ""
+"rozwijanie nawiasów: nie udało się przydzielić pamięci dla elementów w "
+"liczbie %u"
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr "rozwijanie nawiasów: nie udało się przydzielić pamięci dla `%s'"
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "`%s': błędna nazwa aliasu"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "edycja wiersza nie została włączona"
+
+# ???
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "`%s': nieprawidłowa nazwa mapy klawiszy"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: nie można odczytać: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "`%s': nie znana nazwa funkcji"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s nie jest przypisany do żadnego klawisza.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s może być wywołany przez "
+
+# ???
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "`%s': nie można usunąć dowiązania"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "licznik pętli"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "ma sens tylko w pętli `for', `while' lub `until'"
+
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Zwrócenie kontekstu wywołania bieżącej procedury.\n"
+"    \n"
+"    Bez WYRAŻENIA zwracane jest \"$linia $plik\". Z WYRAŻENIEM zwracane "
+"jest\n"
+"    \"$linia $procedura $plik\"; dodatkowe informacje służą do "
+"udostępnienia\n"
+"    śladu stosu.\n"
+"    \n"
+"    Wartość WYRAŻENIA określa o ile ramek wywołań względem bieżącej ramki\n"
+"    należy się cofnąć; numer najwyższej ramki to 0.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Polecenie zwraca 0, chyba że powłoka nie wykonuje funkcji lub WYRAŻENIE\n"
+"    jest nieprawidłowe."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "Nie ustawiono HOME"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "za dużo argumentów"
+
+#: builtins/cd.def:342
+msgid "null directory"
+msgstr "zerowy katalog"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "Nie ustawiono OLDPWD"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "linia %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "uwaga: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: składnia: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: opcja wymaga argumentu"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: wymagany argument numeryczny"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: nie znaleziono"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: nieprawidłowa opcja"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: nieprawidłowa nazwa opcji"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "`%s': nieprawidłowy identyfikator"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "błędna liczba ósemkowa"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "błędna liczba szesnastkowa"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "nieprawidłowa liczba"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: nieprawidłowo określony sygnał"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "`%s': nie jest to nr PID ani prawidłowe określenie zadania"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: zmienna tylko do odczytu"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s poza zakresem"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "argument"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s poza zakresem"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: brak takiego zadania"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: brak kontroli zadań"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "brak kontroli zadań"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: ograniczony"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "ograniczony"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: nie jest to polecenie powłoki"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "błąd zapisu: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "błąd podczas ustawiania atrybutów terminala: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "błąd podczas pobierania atrybutów terminala: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: błąd przy określaniu katalogu bieżącego: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: niejednoznaczne określenie zadania"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr "pomoc nie jest dostępna w tej wersji"
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: nie można anulować definicji: %s jest tylko do odczytu"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: nie można anulować definicji"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: nieprawidłowa nazwa akcji"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: brak definicji dla uzupełnienia"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "uwaga: opcja -F może działać inaczej niż oczekiwano"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "uwaga: opcja -C może działać inaczej niż oczekiwano"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "aktualnie nie jest wykonywana funkcja dopełniania"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "można używać tylko w funkcji"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr "%s: zmienna referencyjna nie może być tablicą"
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr "%s: zmienna referencyjna nie może wskazywać na siebie"
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s: cykliczne odwołanie do nazwy"
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "`%s': błędna nazwa zmiennej przy odwołaniu do nazwy"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "nie można używać `-f' do tworzenia funkcji"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: funkcja tylko do odczytu"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr "%s: przypisanie złożonej tablicy z cytowaniem jest przestarzałe"
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: nie można w ten sposób unicestwić zmiennej tablicowej"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: nie można przekształcić tablicy asocjacyjnej na indeksowaną"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "ładowanie dynamiczne nie jest dostępne"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "nie można otworzyć obiektu współdzielonego %s: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "nie można znaleźć %s w obiekcie współdzielonym %s: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: nie jest Å‚adowany dynamicznie"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr "funkcja ładująca dla %s zwraca niepowodzenie (%d): nie załadowano"
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: nie jest Å‚adowany dynamicznie"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: nie można usunąć: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: jest katalogiem"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: nie jest zwykłym plikiem"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: plik jest za duży"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: nie można uruchomić pliku binarnego"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: nie można uruchomić: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "wylogowanie\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "to nie jest powłoka logowania: użyj `exit'"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "IstniejÄ… zatrzymane zadania.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Istnieją działające zadania.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "nie znaleziono polecenia"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "specyfikacja historii"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: nie udało się otworzyć pliku tymczasowego: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "bieżące"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "zadanie %d uruchomiono bez kontroli zadań"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: niedozwolona opcja -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: opcja wymaga argumentu -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "zapamiętywanie ścieżek poleceń w tablicy asocjacyjnej wyłączone"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: tablica asocjacyjna pusta\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "trafienia\tpolecenie\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Polecenia powłoki pasujące do słowa kluczowego `"
+msgstr[1] "Polecenia powłoki pasujące do słów kluczowych `"
+msgstr[2] "Polecenia powłoki pasujące do słów kluczowych `"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"żaden temat pomocy nie pasuje do `%s'. Spróbuj `help help', `man -k %s'\n"
+"lub `info %s'."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: nie można otworzyć: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Te polecenia powłoki są poleceniami wewnętrznymi. Napisz `help', aby\n"
+"zobaczyć listę.\n"
+"Napisz `help nazwa', aby otrzymać więcej informacji o funkcji `nazwa'.\n"
+"Użyj `info bash', aby otrzymać więcej informacji ogólnych o powłoce.\n"
+"Użyj `man -k' lub `info', aby otrzymać więcej informacji o poleceniach z "
+"tej\n"
+"listy.\n"
+"\n"
+"Gwiazdka (*) po nazwie oznacza, że dane polecenie jest wyłączone.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "nie można używać więcej niż jednego spośród -anrw"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "pozycja historii"
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: nieprawidłowy znacznik czasu"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: rozwinięcie wg historii nie powiodło się"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: inlib nie powiodło się"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "nie można używać innych opcji przy `-x'"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: argumentami muszą być numery procesów lub zadań"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Nieznany błąd"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "spodziewano się wyrażenia"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: nie jest tablicÄ… indeksowanÄ…"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: nieprawidłowo określony deskryptor pliku"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: nieprawidłowy deskryptor pliku: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: błędna liczba linii"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: błędny początek tablicy"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: błędna liczba linii między wywołaniami"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "pusta nazwa zmiennej tablicowej"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "wymagana obsługa zmiennych tablicowych"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "`%s': brak znaku formatujÄ…cego"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "`%c': błędne określenie formatu czasu"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "`%c': nieprawidłowy znak formatujący"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "uwaga: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "problem z analizÄ… formatu: %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "brak cyfry szesnastkowej dla \\x"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "brak cyfry unikodowej dla \\%c"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "brak innego katalogu"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s: nieprawidłowy argument"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<brak katalogu bieżącego>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "pusty stos katalogów"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "indeks stosu katalogów"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Wypisanie listy aktualnie pamiętanych katalogów. Katalogi umieszczane są\n"
+"    na liście za pomocą polecenia `pushd'; można cofać się w obrębie listy\n"
+"    za pomocÄ… polecenia `popd'.\n"
+"    \n"
+"    Opcje:\n"
+"      -c\twyczyszczenie stosu katalogów poprzez usunięcie wszystkich "
+"elementów\n"
+"      -l\tniewypisywanie katalogów względem kat. domowego użytkownika\n"
+"    \tw postaci skróconej z tyldą\n"
+"      -p\twypisanie stosu katalogów po jednym wpisie w linii\n"
+"      -v\twypisanie stosu katalogów po jednym wpisie w linii, poprzedzonych\n"
+"    \tpozycjÄ… na stosie\n"
+"    \n"
+"    Argumenty:\n"
+"      +N\tWypisanie N-tej pozycji liczÄ…c od lewej strony listy wypisywanej\n"
+"    \tprzez dirs wywołane bez opcji, począwszy od zera.\n"
+"    \n"
+"      -N\tWypisanie N-tej pozycji liczÄ…c od prawej strony listy wypisywanej\n"
+"\tprzez dirs wywołane bez opcji, począwszy od zera."
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Dodanie katalogu na wierzchołku stosu katalogów lub rotacja stosu czyniąca\n"
+"    jego nowym wierzchołkiem bieżący katalog roboczy. Wywołane bez\n"
+"    argumentów zamienia na stosie dwa najwyższe katalogi.\n"
+"    \n"
+"    Opcje:\n"
+"      -n\tPominięcie zmiany katalogu podczas umieszczania katalogów na\n"
+"    \tstosie tak, że zmieniany jest tylko stos.\n"
+"    \n"
+"    Argumenty:\n"
+"      +N\tRotacja stosu czyniąca jego wierzchołkiem N-ty katalog (licząc\n"
+"    \tod lewej strony listy wypisywanej przez `dirs', poczÄ…wszy od zera).\n"
+"    \n"
+"      -N\tRotacja stosu czyniąca jego wierzchołkiem N-ty katalog (licząc\n"
+"    \tod prawej strony listy wypisywanej przez `dirs', poczÄ…wszy od zera).\n"
+"    \n"
+"      katalog\tUmieszczenie KATALOGU na wierzchołku stosu i uczynienie go\n"
+"    \tnowym bieżącym katalogiem roboczym.\n"
+"    \n"
+"    Zawartość stosu katalogów można zobaczyć za pomocą polecenia `dirs'."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Usunięcie pozycji ze stosu katalogów. Wywołane bez argumentów usuwa\n"
+"    katalog z wierzchołka stosu i zmienia katalog bieżący na katalog\n"
+"    będący nowym wierzchołkiem stosu.\n"
+"    \n"
+"    Opcje:\n"
+"      -n\tPominięcie zmiany katalogu podczas usuwania katalogów ze stosu\n"
+"    \ttak, że zmieniany jest tylko stos.\n"
+"    \n"
+"    Argumenty:\n"
+"      +N\tUsunięcie ze stosu N-tej pozycji licząc od lewej strony listy\n"
+"    \twypisywanej przez `dirs', począwszy od zera. Na przykład: `popd +0'\n"
+"    \tusuwa pierwszy katalog, `popd +1' usuwa drugi.\n"
+"    \n"
+"      -N\tUsunięcie ze stosu N-tej pozycji licząc od prawej strony listy\n"
+"    \twypisywanej przez `dirs', począwszy od zera. Na przykład: `popd -0'\n"
+"    \tusuwa ostatni katalog, `popd -1' usuwa poprzedni.\n"
+"    \n"
+"    Zawartość stosu katalogów można zobaczyć za pomocą polecenia `dirs'."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: nieprawidłowo określony limit czasu"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "błąd odczytu: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr "wyjście przez `return' możliwe tylko z funkcji lub skryptu"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "nie można jednocześnie anulować definicji funkcji i zmiennej"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: nie jest zmiennÄ… tablicowÄ…"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: nie jest funkcjÄ…"
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr "%s: nie można wyeksportować"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "licznik przesunięcia"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "nie można opcji powłoki jednocześnie ustawić i unieważnić"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: nieprawidłowa nazwa opcji powłoki"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "wymagany argument w postaci nazwy pliku"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: nie znaleziono pliku"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "nie można wstrzymać"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "nie można wstrzymać powłoki logowania"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s jest aliasem do %s'\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s jest słowem kluczowym powłoki\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s jest funkcjÄ…\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s jest specjalnym wewnętrznym poleceniem powłoki\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s jest wewnętrznym poleceniem powłoki\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s jest %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "ścieżka do %s jest zapamiętana (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: nieprawidłowy argument stanowiący ograniczenie"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "`%c': złe polecenie"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: nie można odczytać ograniczenia: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "ograniczenie"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: nie można zmienić ograniczenia: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "liczba ósemkowa"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "`%c': nieprawidłowy operator trybu symbolicznego"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "`%c': nieprawidłowy znak trybu symbolicznego"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " linia "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "ostatnie polecenie: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Przerywanie..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr "INFORM: "
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "nieznany błąd polecenia"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "zły rodzaj polecenia"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "zły łącznik"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "zły skok"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: nieustawiona zmienna"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\aprzekroczony czas oczekiwania na dane wejściowe: auto-wylogowanie\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "nie można przekierować standardowego wejścia z /dev/null: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "TIMEFORMAT: `%c': nieprawidłowy znak formatujący"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr "execute_coproc: koproces [%d:%s] nadal istnieje"
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "błąd potoku"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr "eval: przekroczono maksymalny poziom zagnieżdżenia polecenia eval (%d)"
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr "%s: przekroczono maksymalny poziom zagnieżdżenia polecenia source (%d)"
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr "%s: przekroczono maksymalny poziom zagnieżdżenia funkcji (%d)"
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: ograniczony: nie można podawać `/' w nazwach poleceń"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: nie znaleziono polecenia"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: zły interpreter"
+
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: nie można uruchomić pliku binarnego: %s"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "`%s' jest specjalnym poleceniem wewnętrznym"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "nie można skopiować deskryptora pliku %d do %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "przekroczone ograniczenie poziomu rekursji dla wyrażenia"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "niedomiar stosu rekursji"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "błąd składniowy w wyrażeniu"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "próba przypisania do nie-zmiennej"
+
+#: expr.c:530
+msgid "syntax error in variable assignment"
+msgstr "błąd składniowy w przypisaniu zmiennej"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "dzielenie przez 0"
+
+# ???
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "błąd: zły prefiks operatora przypisującego"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "spodziewano się `:' w wyrażeniu warunkowym"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "wykładnik mniejszy niż 0"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr ""
+"spodziewany identyfikator po operatorze preinkrementacji lub predekrementacji"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "brakujÄ…cy `)'"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "błąd składni: spodziewany argument"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "błąd składni: nieprawidłowy operator arytmetyczny"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (błędny znacznik to \"%s\")"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "nieprawidłowa podstawa arytmetyczna"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: błędna liczba linii"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "wartość za duża na podstawę"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: błąd w wyrażeniu\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: niemożliwy dostęp do katalogów nadrzędnych"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "nie można wyłączyć trybu nieblokującego dla deskryptora %d"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr "nie można przydzielić nowego deskryptora pliku dla wejścia basha z %d"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input: bufor dla nowego deskryptora %d już istnieje"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: pgrp pipe"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+# ???
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "proces o PID %d występuje w działającym zadaniu %d"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "usuwanie zatrzymanego zadania %d z grupą procesów %ld"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process: pid %5ld (%s) oznaczony jako nadal żywy"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: brak takiego PID-u"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Sygnał %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Zakończono"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Zatrzymano"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Zatrzymano(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "Działa"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Zakończono(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Kod wyjścia %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Stan nieznany"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(zrzut pamięci) "
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (katalog: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "setpgid potomka (%ld na %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: PID %ld nie jest potomkiem tej powłoki"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: Brak rekordu dla procesu %ld"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: zadanie %d jest zatrzymane"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: brak takiego zadania"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: zadanie zostało przerwane"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: zadanie %d już pracuje w tle"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr ""
+"waitchld: wyłączanie WNOHANG w celu uniknięcia nieskończonego oczekiwania"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: linia %d: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (zrzut pamięci)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(katalog: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: getpgrp nie powiodło się"
+
+#: jobs.c:4447
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: brak kontroli zadań w tle"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: dyscyplina linii"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "nie można ustawić grupy procesów terminala (%d)"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "w tej powłoce nie ma kontroli zadań"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: założenie, że %s nie jest spełnione\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d: spartaczone założenie\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "nieznany"
+
+# ???
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: nieprawidłowy blok na liście wolnych bloków"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: wywołane dla bloku, który już został zwolniony"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: wywołane dla bloku, który nie został przydzielony"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: wykryto niedomiar; mh_nbytes poza zakresem"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: wykryto niedomiar; mh_nbytes poza zakresem"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: rozmiar początkowy i końcowy fragmentu są różne"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: wywołane dla bloku, który nie został przydzielony"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc: wykryto niedomiar; mh_nbytes poza zakresem"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc: wykryto niedomiar; mh_nbytes poza zakresem"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: rozmiar początkowy i końcowy fragmentu są różne"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: tablica alokacji jest pełna podczas FIND_ALLOC?\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: %p już znajduje się w tablicy jako przydzielony?\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: %p już znajduje się w tablicy jako wolny?\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "nieprawidłowa podstawa"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: nieznany host"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: nieznana usługa"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: źle określona ścieżka sieciowa"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "operacje sieciowe nie sÄ… wspierane"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: nie można zmienić lokalizacji (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: nie można zmienić lokalizacji (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: nie można zmienić lokalizacji (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: nie można zmienić lokalizacji (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "Masz pocztÄ™ w $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "Masz nowÄ… pocztÄ™ w $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "Poczta w %s jest przeczytana\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "błąd składni: oczekiwano wyrażenia arytmetycznego"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "błąd składni: oczekiwany `;'"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "błąd składni: `((%s))'"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: zły rodzaj instrukcji %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr ""
+"dokument miejscowy w linii %d ograniczony końcem pliku (oczekiwano `%s')"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr "make_redirection: instrukcja przekierowania `%d' poza zakresem"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+"shell_getc: shell_input_line_size (%zu) przekracza SIZE_MAX (%lu): linia "
+"skrócona"
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr "przekroczono maksymalną liczbę dokumentów w miejscu"
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "nieoczekiwany EOF podczas poszukiwania pasujÄ…cego `%c'"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "nieoczekiwany EOF podczas poszukiwania `]]'"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "błąd składni w wyrażeniu warunkowym: nieoczekiwany znacznik `%s'"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "błąd składni w wyrażeniu warunkowym"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "nieoczekiwany znacznik `%s', oczekiwano `)'"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "oczekiwano `)'"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "nieoczekiwany argument `%s' jednoargumentowego operatora warunkowego"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "nieoczekiwany argument jednoargumentowego operatora warunkowego"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "nieoczekiwany argument `%s', oczekiwano dwuarg. operatora warunkowego"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "oczekiwano dwuargumentowego operatora warunkowego"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "nieoczekiwany argument `%s' dwuargumentowego operatora warunkowego"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "nieoczekiwany argument dwuargumentowego operatora warunkowego"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "nieoczekiwany znacznik `%c' w poleceniu warunkowym"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "nieoczekiwany znacznik `%s' w poleceniu warunkowym"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "nieoczekiwany znacznik %d w poleceniu warunkowym"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "błąd składni przy nieoczekiwanym znaczniku `%s'"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "błąd składni przy `%s'"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "błąd składni: nieoczekiwany koniec pliku"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "błąd składni"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Użyj \"%s\", aby opuścić tę powłokę.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "nieoczekiwany EOF podczas poszukiwania pasujÄ…cego `)'"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "uzupełnienie: nie znaleziono funkcji `%s'"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr "programmable_completion: %s: możliwe zapętlenie wznowień"
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: NULL COMPSPEC"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: zły łącznik `%d'"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: nieprawidłowy deskryptor pliku"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: pusty wskaźnik pliku"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != fileno xtrace fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: `%c': nieprawidłowy znak formatujący"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "deskryptor pliku poza zakresem"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: niejednoznaczne przekierowanie"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: nie można nadpisać istniejącego pliku"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: ograniczony: nie można przekierować wyjścia"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "nie można utworzyć pliku tymczasowego dla dokumentu miejscowego: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: nie można przypisać deskryptora pliku do zmiennej"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "/dev/(tcp|udp)/host/port nie sÄ… wspierane bez sieci"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "błąd przekierowania: nie można powielić deskryptora pliku"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "nie można znaleźć /tmp, proszę o utworzenie!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp musi być prawidłową nazwą katalogu"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr "tryb ładnego wypisywania jest ignorowany w powłokach interaktywnych"
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: nieprawidłowa opcja"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "nie można ustawić uid-a na %d: efektywny uid %d"
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "nie można ustawić gid-a na %d: efektywny gid %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr "nie można uruchomić debuggera; tryb diagnostyczny wyłączony"
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr "%s: jest katalogiem"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "Nie mam nazwy!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, wersja %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Użycie:\t%s [długa opcja GNU] [opcja] ...\n"
+"\t%s [długa opcja GNU] [opcja] plik-skryptu ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "DÅ‚ugie opcje GNU:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Opcje powłoki:\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-ilrsD lub -c polecenie lub -O shopt_option\t\t(tylko wywołanie)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s lub -o opcja\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+"Aby uzyskać więcej informacji o opcjach powłoki, napisz `%s -c \"help set"
+"\"'.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr ""
+"Aby uzyskać więcej informacji o poleceniach wewnętrznych powłoki,\n"
+"napisz `%s -c help'.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "Do zgłaszania błędów należy używać polecenia `bashbug'.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr "strona domowa basha: <http://www.gnu.org/software/bash>\n"
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr ""
+"Ogólna pomoc przy użytkowaniu oprogramowania GNU: <http://www.gnu.org/"
+"gethelp/>\n"
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: nieprawidłowa operacja"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Błędny sygnał"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Rozłączenie"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Przerwanie"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Wyjście"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Niedozwolona instrukcja"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "Pułapka debuggera/breakpoint"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "Instrukcja ABORT"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "Pułapka EMT"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "BÅ‚Ä…d w obliczeniach zmiennoprzecinkowych"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Unicestwiony"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "BÅ‚Ä…d szyny"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Naruszenie ochrony pamięci"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Błędne wywołanie systemowe"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Przerwany potok"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Budzik"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Zakończony"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Nagłe żądanie we/wy"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Zatrzymany (sygnał)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Kontynuacja"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Śmierć lub zatrzymanie potomka"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Zatrzymany (wejście z tty)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Zatrzymany (wyjście na tty)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "We/wy gotowe"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "Przekroczony limit procesora"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "Przekroczony limit pliku"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Alarm (wirtualny)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Alarm (profiler)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Okno zmienione"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Zasoby utracone"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Sygnał użytkownika 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Sygnał użytkownika 2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "Dane wejściowe HFT"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "Bliska awaria zasilania"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "Bliska awaria systemu"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "Przeniesienie procesu na inny procesor"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "BÅ‚Ä…d programowania"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "Nadany tryb monitora HFT"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "Wycofany tryb monitora HFT"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "Sekwencja dźwiękowa HFT zakończona"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "Żądanie informacji"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "Nieznany sygnał #%d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "złe podstawienie: brak zamykającego `%s' w %s"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: nie można przypisać listy do elementu tablicy"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "nie można utworzyć potoku dla podstawienia procesu"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "nie można utworzyć procesu potomnego dla podstawienia procesu"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "nie można otworzyć nazwanego potoku %s do odczytu"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "nie można otworzyć nazwanego potoku %s do zapisu"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "nie można powielić nazwanego potoku %s jako deskryptor %d"
+
+#: subst.c:6213
+msgid "command substitution: ignored null byte in input"
+msgstr "podstawienie polecenia: zignorowano zerowy bajt na wejściu"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "nie można utworzyć potoku dla podstawienia polecenia"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "nie można utworzyć procesu potomnego dla podstawienia polecenia"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute: nie można powielić potoku jako deskryptora 1"
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: nieprawidłowa nazwa zmiennej przy odwołaniu do nazwy"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: błędne rozwinięcie niebezpośrednie"
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr "`%s': błędna nazwa zmiennej"
+
+#: subst.c:7256
+#, c-format
+msgid "%s: parameter not set"
+msgstr "%s: parametr nieustawiony"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: parametr pusty lub nieustawiony"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: wyrażenie dla podłańcucha < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: złe podstawienie"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: nie można przypisywać w ten sposób"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+"przyszłe wersje powłoki będą wymuszać obliczenie jako podstawienie "
+"arytmetyczne"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "złe podstawienie: brak zamykającego \"`\" w %s"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "brak pasujÄ…cego: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "oczekiwano argumentu"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: oczekiwano wyrażenia całkowitego"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "oczekiwano `)'"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "oczekiwano `)', znaleziono %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: oczekiwano operatora dwuargumentowego"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: oczekiwano operatora jednoargumentowego"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "brakujÄ…cy `]'"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "błąd składni: oczekiwany `;'"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "nieprawidłowy numer sygnału"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr "obsługa pułapki: przekroczono maksymalny poziom obsługi pułapek (%d)"
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: zła wartość trap_list[%d]: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps: obsługa sygnału jest ustawiona na SIG_DFL, wysyłając %d "
+"(%s) do siebie"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: zły sygnał %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "błąd importu definicji funkcji dla `%s'"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "poziom powłoki (%d) jest za duży, ustawiono na 1"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: brak kontekstu funkcji w bieżącym zakresie"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: nie można przypisać wartości do zmiennej"
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr "%s: przypisanie wartości całkowitej przy odwołaniu do nazwy"
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: brak kontekstu funkcji w bieżącym zakresie"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s ma pusty exportstr"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "nieprawidłowy znak %d w exportstr dla %s"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "brak `=' w exportstr dla %s"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr "pop_var_context: nagłówek shell_variables poza kontekstem funkcji"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: brak kontekstu global_variables"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr ""
+"pop_scope: nagłówek shell_variables poza zakresem tymczasowego środowiska"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: nie można otworzyć jako PLIK"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: nieprawidłowa wartość dla deskryptora pliku do śledzenia"
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s: wartość zgodności poza zakresem"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Copyright (C) 2018 Free Software Foundation, Inc."
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"Licencja GPLv3+: GNU GPL wersja 3 lub późniejsza <http://gnu.org/licenses/"
+"gpl.html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, wersja %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr ""
+"To oprogramowanie jest wolnodostępne; można je swobodnie zmieniać i "
+"rozpowszechniać."
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "Nie ma ŻADNEJ GWARANCJI w granicach dopuszczanych przez prawo."
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: nie można przydzielić %lu bajtów (przydzielono %lu)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: nie można przydzielić %lu bajtów"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: nie można przydzielić %lu bajtów (przydzielono %lu)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: nie można przydzielić %lu bajtów"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [nazwa[=wartość] ... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] nazwa [nazwa ...]"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpvsPVSX] [-m mapa] [-f plik] [-q nazwa] [-u nazwa] [-r sekwencja] [-"
+"x sekwencja:polecenie-powłoki] [sekwencja:funkcja-readline lub polecenie-"
+"readline]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [polecenie-wbudowane [arg ... ]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [wyrażenie]"
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]] [-@]] [katalog]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] polecenie [arg ...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilnrtux] [-p] [nazwa[=wartość] ...]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilnrtux] [-p] nazwa[=wartość] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [opcja] nazwa[=wartość] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [arg ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [arg ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f plik] [nazwa ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [arg ...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts łańcuch-opcji nazwa [arg]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a nazwa] [polecenie [argumenty ...]] [przekierowanie ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr ""
+"fc [-e nazwa-ed] [-lnr] [pierwszy] [ostatni] lub fc -s [wz=zam] [polecenie]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [zadanie]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [zadanie ...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p ścieżka] [-dt] [nazwa ...]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [wzorzec ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d offset] [n] lub history -anrw [plik] lub history -ps arg "
+"[arg ...]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [zadanie ...] lub jobs -x polecenie [argumenty]"
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [zadanie ... | pid ...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s sygnał | -n numer-sygnału | -sygnał] pid | zadanie ... lub kill -l "
+"[sygnał]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let arg [arg ...]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a tablica] [-d separator] [-i tekst] [-n liczba] [-N liczba] [-"
+"p zachęta] [-t czas] [-u fd] [nazwa ...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o nazwa-opcji] [--] [arg ...]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [nazwa ...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [nazwa[=wartość] ...] lub export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [aAf] [nazwa[=wartość] ...] lub readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source plik [argumenty]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". plik [argumenty]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [wyrażenie]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ arg... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[arg] sygnał ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] nazwa [nazwa ...]"
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [ograniczenie]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [uprawnienia]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-fn] [id ...]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [pid ...]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for NAZWA [in S�OWA ... ] ; do POLECENIA; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( wyr1; wyr2; wyr3 )); do POLECENIA; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select NAZWA [in S�OWA ... ;] do POLECENIA; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] potok"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case S�OWO in [WZORZEC [| WZORZEC]...) POLECENIA ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if POLECENIA; then POLECENIA; [ elif POLECENIA; then POLECENIA; ]... [ else "
+"POLECENIA; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while POLECENIA; do POLECENIA; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until POLECENIA; do POLECENIA; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [NAZWA] polecenie [przekierowania]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function nazwa { POLECENIA ; } lub nazwa () { POLECENIA ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ POLECENIA ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "zadanie [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( wyrażenie ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ wyrażenie ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "zmienne - nazwy i znaczenie niektórych zmiennych powłoki"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | katalog]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [nazwa-opcji ...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v var] format [argumenty]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o opcja] [-A akcja] [-G wzorzec-"
+"glob] [-W lista-słów]  [-F funkcja] [-C polecenie] [-X wzorzec-filtra] [-P "
+"przedrostek] [-S przyrostek] [nazwa ...]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o opcja] [-A akcja] [-G wzorzec-glob] [-W lista-"
+"słów]  [-F funkcja] [-C polecenie] [-X wzorzec-filtra] [-P przedrostek ] [-S "
+"przyrostek] [słowo]"
+
+#: builtins.c:239
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o opcja] [-DEI] [nazwa ...]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-d separator] [-n liczba] [-O poczÄ…tek] [-s liczba] [-t] [-u fd] [-"
+"C wywołanie] [-c co-ile] [tablica]"
+
+#: builtins.c:244
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-d ogranicznik] [-n liczba] [-O poczÄ…tek] [-s liczba] [-t] [-u "
+"fd] [-C wywołanie] [-c krok] [tablica]"
+
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Definiowanie i wyświetlanie aliasów.\n"
+"    \n"
+"    Bez argumentów `alias' wypisuje na standardowym wyjściu listę aliasów\n"
+"    w postaci alias NAZWA=WARTOŚĆ.\n"
+"    \n"
+"    W przeciwnym przypadku definiowany jest alias dla każdej NAZWY, dla "
+"której\n"
+"    podano WARTOŚĆ. Spacja na końcu WARTOŚCI powoduje, że podczas "
+"rozwijania\n"
+"    tego aliasu podstawienie aliasów będzie przeprowadzone także dla\n"
+"    następnego słowa.\n"
+"    \n"
+"    Opcje:\n"
+"      -p\twypisanie wszystkich zdefiniowanych aliasów w formacie do\n"
+"    \tponownego użycia\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Polecenie alias zwraca prawdę, chyba że poda się NAZWĘ, dla której nie\n"
+"    zdefiniowano aliasu."
+
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Usuwa wszystkich NAZW z listy zdefiniowanych aliasów.\n"
+"    \n"
+"    Opcje:\n"
+"      -a\tusunięcie wszystkich definicji aliasów\n"
+"    \n"
+"    Zwracana jest prawda, chyba że NAZWA nie jest istniejącym aliasem."
+
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"Ustawianie przypisań klawiszy i zmiennych Readline.\n"
+"    \n"
+"    Przypisanie sekwencji klawiszy do funkcji Readline lub makra albo\n"
+"    ustawienie zmiennej Readline. Składnia pozbawiona opcji jest równoważna\n"
+"    stosowanej w ~/.inputrc, ale musi być przekazana jako jeden argument, "
+"np.:\n"
+"    bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Opcje:\n"
+"      -m  MAPA           Użycie MAPY jako mapy klawiatury na czas tego\n"
+"                         polecenia. Dozwolone nazwy map klawiatury to "
+"emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command i vi-insert.\n"
+"      -l                 Wypisanie nazw funkcji.\n"
+"      -P                 Wypisanie nazw funkcji i dowiązań.\n"
+"      -p                 Wypisanie funkcji i dowiązań w postaci nadającej "
+"siÄ™\n"
+"                         do użycia jako dane wejściowe.\n"
+"      -S                 Wypisanie sekwencji klawiszy wywołujących makra "
+"oraz\n"
+"                         ich wartości.\n"
+"      -s                 Wypisanie sekwencji klawiszy wywołujących makra "
+"oraz\n"
+"                         ich wartości w postaci nadającej się do użycia "
+"jako\n"
+"                         dane wejściowe.\n"
+"      -V                 Wypisanie nazw zmiennych i ich wartości.\n"
+"      -v                 Wypisanie nazw zmiennych i ich wartości w postaci\n"
+"                         nadającej się do użycia jako dane wejściowe.\n"
+"      -q  nazwa-funkcji  Określenie, które klawisze wywołują zadaną "
+"funkcjÄ™.\n"
+"      -u  nazwa-funkcji  Anulowanie wszystkich dowiązań dla klawiszy\n"
+"                         przypisanych do funkcji o podanej nazwie.\n"
+"      -r  sekwencja      Usunięcie dowiązania dla SEKWENCJI klawiszy.\n"
+"      -f  plik           Odczyt dowiązań dla klawiszy z podanego PLIKU.\n"
+"      -x  sekwencja:polecenie-powłoki\tPowoduje uruchomienie POLECENIA-"
+"POW�OKI\n"
+"    \t\t\t\tgdy wprowadzona zostanie podana SEKWENCJA klawiszy.\n"
+"      -X                 Lista sekwencji klawiszy przypisanych przez -x "
+"oraz\n"
+"                         powiÄ…zane polecenia w postaci nadajÄ…cej siÄ™ do "
+"użycia\n"
+"                         jako dane wejściowe.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    bind zwraca 0, chyba że podano nieznaną opcję lub wystąpi błąd."
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Wyjście z pętli for, while lub until.\n"
+"    \n"
+"    Wyjście z pętli FOR, WHILE lub UNTIL. Jeśli podano N, sterowanie "
+"wychodzi\n"
+"    za N-tą zagnieżdżoną pętlę.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Instrukcja zwraca prawdę, chyba że N jest mniejsze niż 1."
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Wznowienie pętli for, while lub until.\n"
+"    \n"
+"    Wznowienie następnej iteracji otaczającej pętli FOR, WHILE lub UNTIL.\n"
+"    Jeśli podano N, to wznawiana jest N-ta otaczająca pętla.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Instrukcja zwraca 0, chyba że N jest mniejsze niż 1."
+
+#: builtins.c:354
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Wywołanie polecenia wbudowanego powłoki.\n"
+"    \n"
+"    Wywołanie POLECENIA-WBUDOWANEGO z argumentami ARG bez wykonywania\n"
+"    wyszukiwania polecenia. Jest to przydatne w przypadku ponownego\n"
+"    implementowania polecenia wbudowanego jako funkcji powłoki i "
+"wywoływania\n"
+"    polecenia wbudowanego z wewnÄ…trz tej funkcji.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Instrukcja zwraca stan wyjściowy POLECENIA-WBUDOWANEGO lub fałsz, jeśli\n"
+"    POLECENIE-WBUDOWANE nie jest poleceniem wbudowanym powłoki."
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Zwrócenie kontekstu wywołania bieżącej procedury.\n"
+"    \n"
+"    Bez WYRAŻENIA zwracane jest \"$linia $plik\". Z WYRAŻENIEM zwracane "
+"jest\n"
+"    \"$linia $procedura $plik\"; dodatkowe informacje służą do "
+"udostępnienia\n"
+"    śladu stosu.\n"
+"    \n"
+"    Wartość WYRAŻENIA określa o ile ramek wywołań względem bieżącej ramki\n"
+"    należy się cofnąć; numer najwyższej ramki to 0.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Polecenie zwraca 0, chyba że powłoka nie wykonuje funkcji lub WYRAŻENIE\n"
+"    jest nieprawidłowe."
+
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"Zmiana bieżącego katalogu powłoki.\n"
+"    \n"
+"    Zmiana bieżącego katalogu na KATALOG. Domyślnym KATALOGIEM jest wartość\n"
+"    zmiennej powłoki HOME.\n"
+"    \n"
+"    Zmienna CDPATH określa ścieżkę przeszukiwania w poszukiwaniu katalogu\n"
+"    zawierającego KATALOG. Alternatywne nazwy katalogów są w CDPATH "
+"rozdzielone\n"
+"    dwukropkami (:). Pusta nazwa katalogu oznacza to samo, co katalog\n"
+"    bieżący. Jeśli KATALOG zaczyna się od ukośnika (/), to CDPATH nie\n"
+"    nie jest używane.\n"
+"    \n"
+"    Gdy katalog nie zostanie znaleziony, a ustawiona jest zmienna powłoki\n"
+"    `cdable_vars', to następuje próba użycia podanej nazwy jako nazwy "
+"zmiennej.\n"
+"    Jeśli zmienna ta ma wartość, to jako KATALOG jest używana jej wartość.\n"
+"    \n"
+"    Opcje:\n"
+"        -L\twymuszenie śledzenia dowiązań symbolicznych: rozwiązanie\n"
+"    \t\tdowiązań w KATALOGU po przetworzeniu wszystkich `..'\n"
+"        -P\tkorzystanie z fizycznej struktury katalogów zamiast śledzenia\n"
+"    \t\tdowiązań symbolicznych: rozwiązanie dowiązań w KATALOGU przed\n"
+"    \t\tprzetworzeniem wszystkich `..'\n"
+"        -e\tjeśli podano opcję -P, a nie można określić bieżącego katalogu,\n"
+"    \t\tpolecenie kończy się stanem niezerowym\n"
+"        -@  na systemach obsługujących je, zaprezentowanie pliku mającego\n"
+"    \t\trozszerzone atrybuty jako katalogu zawierajÄ…cego atrybuty pliku\n"
+"    \n"
+"    Domyślne jest śledzenie dowiązań symbolicznych, jak z opcją `-L'.\n"
+"    `..' jest przetwarzane przez usunięcie bezpośredniego poprzedniego\n"
+"    elementu ścieżki przed ukośnikiem lub początkiem KATALOGU.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Polecenie zwraca 0 jeśli katalog został zmieniony oraz $PWD zostało\n"
+"    zmienione pomyślnie w przypadku użycia -P; w przeciwnym razie zwraca\n"
+"    wartość niezerową."
+
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"Wypisanie nazwy bieżącego katalogu roboczego.\n"
+"    \n"
+"    Opcje:\n"
+"      -L\twypisanie wartości $PWD jeśli określa bieżący katalog roboczy\n"
+"      -P\twypisanie katalogu fizycznego, bez dowiązań symbolicznych\n"
+"    \n"
+"    Domyślnie `pwd' zachowuje się tak, jak z opcją `-L'.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Polecenie zwraca 0, chyba że podano nieprawidłową opcję lub katalog\n"
+"    bieżący nie może być odczytany."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Polecenie puste.\n"
+"    \n"
+"    Żadnego efektu; polecenie nic nie robi.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zawsze zwracana jest prawda."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Zwrócenie wyniku pozytywnego.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zawsze zwracana jest prawda."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Zwrócenie wyniku negatywnego.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zawsze zwracany jest fałsz."
+
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Wywołanie prostego polecenia lub wyświetlenie informacji o poleceniach.\n"
+"    \n"
+"    Uruchomienie POLECENIA z ARGUMENTAMI z pominięciem wyszukiwania funkcji\n"
+"    powłoki lub wyświetlenie informacji o podanych POLECENIACH. Może być "
+"użyte\n"
+"    do wywołania poleceń z dysku jeśli już istnieje funkcja o danej nazwie.\n"
+"    \n"
+"    Opcje:\n"
+"      -p\tużycie domyślnej wartości PATH, pod którą powinny być wszystkie\n"
+"    \t\tstandardowe narzędzia\n"
+"      -v\twypisanie opisu POLECENIA w sposób podobny do polecenia `type'\n"
+"      -V\twypisanie szczegółowego opisu każdego POLECENIA\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Polecenie zwraca stan POLECENIA lub fałsz, jeśli POLECENIE nie zostało\n"
+"    znalezione."
+
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"Ustawienie wartości i atrybutów zmiennej.\n"
+"    \n"
+"    Deklaracja zmiennych i nadanie im wartości. Jeśli nie podano NAZW,\n"
+"    wyświetlane są atrybuty i wartości wszystkich zmiennych.\n"
+"    \n"
+"    Opcje:\n"
+"      -f\tograniczenie akcji lub wyświetlania do nazw i definicji funkcji\n"
+"      -F\tograniczenie wyświetlania tylko do nazw funkcji (oraz numeru\n"
+"    \t\tlinii i pliku źródłowego w przypadku diagnostyki)\n"
+"      -g\ttworzenie zmiennych globalnych w przypadku użycia w funkcji\n"
+"    \t\tpowłoki; w przeciwnym wypadku ignorowane\n"
+"      -p\twyświetlenie atrybutów i wartości dla każdej NAZWY\n"
+"    \n"
+"    Opcje ustawiajÄ…ce atrybuty:\n"
+"      -a\tczyni NAZWĘ tablicą indeksowaną (jeśli są one obsługiwane)\n"
+"      -A\tczyni NAZWĘ tablicą asocjacyjną (jeśli są one obsługiwane)\n"
+"      -i\tnadaje NAZWIE atrybut `integer' (zmiennej całkowitej)\n"
+"      -l\tprzekształca wartość każdej NAZWY na małe litery przy przypisaniu\n"
+"      -n\tczyni NAZWĘ odwołaniem do zmiennej o nazwie wskazanej przez "
+"wartość\n"
+"      -r\tczyni NAZWĘ tylko do odczytu\n"
+"      -t\tnadaje NAZWIE atrybut `trace'\n"
+"      -u\tprzekształca wartość każdej NAZWY na wielkie litery przy "
+"przypisaniu\n"
+"      -x\teksportuje NAZWĘ\n"
+"    \n"
+"    Użycie `+' zamiast `-' wyłącza podany atrybut.\n"
+"    \n"
+"    Zmienne z atrybutem `integer' mają obliczaną wartość arytmetyczną\n"
+"    (jak w poleceniu `let') podczas przypisywania wartości.\n"
+"    \n"
+"    W przypadku użycia w funkcji `declare' czyni NAZWĘ lokalną, podobnie\n"
+"    jak polecenie `local'. Opcja `-g' zmienia to zachowanie.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Polecenie zwraca prawdę, chyba że podano błędną opcję lub wystąpi błąd."
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"Ustawienie wartości i atrybutów zmiennej.\n"
+"    \n"
+"    Synonim `declare' - p. `help declare'."
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Definiowanie zmiennych lokalnych.\n"
+"    \n"
+"    Utworzenie zmiennej lokalnej o podanej NAZWIE i nadanie jej WARTOÅšCI.\n"
+"    OPCJA może być dowolną opcją przyjmowaną przez `declare'.\n"
+"    \n"
+"    Zmienne lokalne mogą być używane tylko w funkcji; są widoczne wyłącznie\n"
+"    w funkcji, w której zostały zdefiniowanej, oraz jej potomkach.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, chyba że podano błędną opcję, wystąpi błąd przy\n"
+"    przypisaniu zmiennej lub powłoka nie wykonuje żadnej funkcji."
+
+#: builtins.c:557
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Wypisanie argumentów na standardowym wyjściu.\n"
+"    \n"
+"    Wypisanie na standardowym wyjściu argumentów ARG oddzielonych "
+"pojedynczymi\n"
+"    spacjami oraz znaku końca linii.\n"
+"    \n"
+"    Opcje:\n"
+"      -n\tniedołączanie znaku końca linii\n"
+"      -e\twłączenie interpretowania poniższych znaków poprzedzonych\n"
+"    \todwrotnym ukośnikiem\n"
+"      -E\twyłączenie interpretowania poniższych znaków poprzedzonych\n"
+"    \todwrotnym ukośnikiem\n"
+"    \n"
+"    `echo' interpretuje następujące znaki poprzedzone odwrotnym ukośnikiem:\n"
+"      \\a\talarm (dzwonek)\n"
+"      \\b\tcofnięcie\n"
+"      \\c\tpominięcie dalszego wyjścia (w tym znaku nowego wiersza)\n"
+"      \\e\tznak ESCAPE\n"
+"      \\E\tznak ESCAPE\n"
+"      \\f\twysuw strony\n"
+"      \\n\tnowy wiersz\n"
+"      \\r\tpowrót karetki\n"
+"      \\t\ttabulacja pozioma\n"
+"      \\v\ttabulacja pionowa\n"
+"      \\\\\todwrotny ukośnik\n"
+"      \\0nnn\tznak o kodzie ASCII NNN (ósemkowo). NNN może stanowić od\n"
+"    \t\t0 do 3 cyfr ósemkowych\n"
+"      \\xHH\tznak ośmiobitowy o wartości HH (szesnastkowo). HH może być\n"
+"    \t\tjednÄ… lub dwiema cyframi szesnastkowymi\n"
+"      \\uHHHH\tznak Unicode o wartości HHHH (szesnastkowo). HHHH może mieć\n"
+"    \t\tod jednej do czterech cyfr szesnastkowych.\n"
+"      \\UHHHHHHHH znak Unicode o wartości HHHHHHHH (szesnastkowo). HHHHHHHH\n"
+"    \t\tmoże mieć od jednej do ośmiu cyfr szesnastkowych.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, chyba że wystąpi błąd zapisu."
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Wypisanie argumentów na standardowym wyjściu.\n"
+"    \n"
+"    Wypisanie na standardowym wyjściu argumentów ARG i znaku końca linii.\n"
+"    \n"
+"    Opcje:\n"
+"      -n\tniedołączanie znaku końca linii\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, chyba że wystąpi błąd zapisu."
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"Włączanie i wyłączanie poleceń wbudowanych powłoki.\n"
+"    \n"
+"    Włączanie i wyłączanie poleceń wbudowanych powłoki. Wyłączenie pozwala\n"
+"    na wykonanie polecenia z dysku, majÄ…cego tÄ™ samÄ… nazwÄ™, co polecenie\n"
+"    wbudowane bez używania pełnej ścieżki.\n"
+"    \n"
+"    Opcje:\n"
+"      -a\twypisanie listy poleceń wbudowanych z informacją, które są "
+"włączone\n"
+"      -n\twyłączenie każdej NAZWY lub wypisanie listy wyłączonych poleceń\n"
+"      -p\twypisanie listy poleceń w formacie do ponownego użycia\n"
+"      -s\twypisanie tylko nazw posiksowych \"specjalnych\" poleceń "
+"wbudowanych\n"
+"    \n"
+"    Opcje sterujÄ…ce dynamicznym Å‚adowaniem:\n"
+"      -f\tWczytanie polecenia wbudowanego NAZWA z obiektu współdzielonego "
+"PLIK\n"
+"      -d\tUsunięcie polecenia wczytanego przez -f\n"
+"    \n"
+"    Bez opcji włączana jest każda NAZWA.\n"
+"    \n"
+"    Aby użyć polecenia `test' z $PATH zamiast wersji wbudowanej, należy\n"
+"    wykonać `enable -n test'.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, chyba że NAZWA nie jest poleceniem wbudowanym lub\n"
+"    wystąpi błąd."
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Wykonanie argumentów jako polecenia powłoki.\n"
+"    \n"
+"    Połączenie argumentów ARG w pojedynczy łańcuch, użycie rezultatu jako\n"
+"    wejścia dla powłoki i wykonanie wynikowych poleceń.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracany jest stan wyjściowy polecenia lub prawdę, jeśli polecenie jest\n"
+"    puste."
+
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"Analiza opcji z argumentów.\n"
+"    \n"
+"    Polecenie getopts jest używane przez procedury powłoki przy "
+"analizowaniu\n"
+"    parametrów pozycyjnych jako opcji.\n"
+"    \n"
+"    �AŃCUCH-OPCJI zawiera litery opcji, które mają być rozpoznane; jeśli po\n"
+"    literze następuje dwukropek, opcja wymaga argumentu, który powinien być\n"
+"    oddzielony od opcji spacjÄ….\n"
+"    \n"
+"    Przy każdym wywołaniu getopts umieszcza następną opcję w zmiennej "
+"powłoki\n"
+"    $nazwa, inicjując ją, jeśli nie istnieje; natomiast indeks następnego\n"
+"    argumentu do przetworzenia jest umieszczany w zmiennej powłoki OPTIND\n"
+"    OPTIND jest inicjowany wartością 1 przy każdym wywołaniu powłoki lub\n"
+"    skryptu powłoki. Jeśli opcja wymaga argumentu, getopts umieszcza ten\n"
+"    argument w zmiennej powłoki OPTARG.\n"
+"    \n"
+"    getopts zgłasza błędy na jeden z dwóch sposobów. Jeśli pierwszy znak\n"
+"    �AŃCUCHA-OPCJI jest dwukropkiem, getopts wykorzystuje ciche zgłaszanie\n"
+"    błędów. W tym trybie komunikaty błędów nie są wypisywane. Jeśli "
+"napotkana\n"
+"    zostanie błędna opcja, getopts umieszcza znak opcji w OPTARG. Jeśli\n"
+"    nie znaleziono wymaganego argumentu, getopts umieszcza znak ':' w "
+"NAZWIE\n"
+"    i ustawia OPTARG na napotkany znak opcji. Jeśli getopts nie jest w "
+"trybie\n"
+"    cichym i napotkana zostanie błędna opcja, getopts umieszcza znak '?'\n"
+"    w NAZWIE i anuluje OPTARG. Jeśli nie znaleziono wymaganego argumentu,\n"
+"    w NAZWIE umieszczany jest znak '?', OPTARG jest anulowany i wypisywany\n"
+"    jest komunikat diagnostyczny.\n"
+"    \n"
+"    Jeśli zmienna powłoki OPTERR ma wartość 0, getopts wyłącza wypisywanie\n"
+"    komunikatów błędów, nawet jeśli pierwszym znakiem �AŃCUCHA-OPCJI nie "
+"jest\n"
+"    dwukropek. OPTERR domyślnie ma wartość 1.\n"
+"    \n"
+"    Polecenie getopts normalnie przetwarza parametry pozycyjne ($0 - $9), "
+"ale\n"
+"    jeśli podano więcej argumentów, są one przetwarzane zamiast nich.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, jeśli napotkano opcję; fałsz, jeśli wystąpi "
+"koniec\n"
+"    opcji lub błąd."
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"Zastąpienie powłoki podanym poleceniem.\n"
+"    \n"
+"    Wywoływane jest POLECENIE, zastępując tę powłokę podanym programem.\n"
+"    ARGUMENTY stają się argumentami POLECENIA. Jeśli nie podano POLECENIA,\n"
+"    wszystkie podane przekierowania odnoszą skutek dla bieżącej powłoki.\n"
+"    \n"
+"    Opcje:\n"
+"      -a nazwa\tprzekazanie NAZWY jako zerowego argumentu POLECENIA\n"
+"      -c\twywołanie POLECENIA z pustym środowiskiem\n"
+"      -l\tumieszczenie kreski w zerowym argumencie POLECENIA\n"
+"    \n"
+"    Jeśli polecenia nie można wywołać, powłoka nieinteraktywna kończy się,\n"
+"    chyba że ustawiona jest opcja powłoki `execfail'.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, chyba że nie uda się znaleźć POLECENIA lub "
+"wystÄ…pi\n"
+"    błąd przekierowania."
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Opuszczenie powłoki.\n"
+"    \n"
+"    Opuszczenie powłoki z kodem zakończenia N. Jeśli N pominięto, kodem\n"
+"    zakończenia będzie kod zakończenia ostatniego wykonanego polecenia."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Opuszczenie powłoki logowania.\n"
+"    \n"
+"    Opuszczenie powłoki logowania z kodem zakończenia N. Zwraca błąd, jeśli\n"
+"    powłoka nie jest powłoką logowania."
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"Wyświetlanie lub wykonywanie poleceń z listy historii.\n"
+"    \n"
+"    fc służy do wypisywania, edycji i ponownego uruchamiania poleceń z "
+"listy\n"
+"    historii. PIERWSZY i OSTATNI jako liczby określają zakres lub PIERWSZY\n"
+"    jako napis oznacza najpóźniej wykonywane polecenie zaczynające się od "
+"tego\n"
+"    napisu.\n"
+"    \n"
+"    Opcje:\n"
+"       -e NAZWA-ED\tokreśla edytor, który ma być używany. Domyślnymi\n"
+"    \twartościami są: najpierw FCEDIT, potem EDITOR, a na końcu vi\n"
+"       -l\twypisywanie wierszy zamiast ich edycji\n"
+"       -n\tniewypisywanie numerów wierszy\n"
+"       -r\todwrócenie kolejności wierszy (czyniąc najnowsze wypisane\n"
+"    \tpolecenie pierwszym)\n"
+"    \n"
+"    Przy wywołaniu polecenia w postaci `fc -s [wz=zam ...] [polecenie]',\n"
+"    jest ono wywoływane ponownie po wykonaniu podstawienia WZ=ZAM.\n"
+"    \n"
+"    Przydatnym aliasem korzystającym z tego jest r='fc -s' tak, że "
+"napisanie\n"
+"    `r cc' uruchamia ostatnie polecenie zaczynajÄ…ce siÄ™ od `cc', a "
+"napisanie\n"
+"    `r' uruchamia ponownie ostatnie polecenie.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda lub stan wykonanego polecenia; wartość niezerowa\n"
+"    w przypadku błędu."
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Przeniesienie zadania na pierwszy plan.\n"
+"    \n"
+"    Umieszczenie ZADANIA na pierwszym planie oraz uczynienie go bieżącym\n"
+"    zadaniem. Jeśli nie określono ZADANIA, użyte zostanie zadanie bieżące\n"
+"    w rozumieniu powłoki.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Stan zadania umieszczonego na pierwszym planie lub fałsz, jeśli wystąpi\n"
+"    błąd."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Przeniesienie zadań w tło.\n"
+"    \n"
+"    Umieszczenie wszystkich ZADAŃ w tle tak, jakby zostały uruchomione\n"
+"    z `&'. Jeśli nie określono ZADAŃ, użyte zostanie zadanie bieżące\n"
+"    w rozumieniu powłoki.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, chyba że sterowanie zadaniami nie jest włączone\n"
+"    lub wystąpi błąd."
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"Zapamiętanie lub wypisanie położenia programów.\n"
+"    \n"
+"    Określenie i zapamiętanie pełnej ścieżki każdego polecenia NAZWA. Jeśli\n"
+"    nie podano argumentów, wyświetlane są informacje o zapamiętanych\n"
+"    poleceniach.\n"
+"    \n"
+"    Opcje:\n"
+"      -d\tzapomnienie położenia każdej NAZWY\n"
+"      -l\twypisanie w formacie do wykorzystania jako wejście\n"
+"      -p ścieżka\tużycie ŚCIEŻKI jako pełnej ścieżki NAZWY\n"
+"      -r\tzapomnienie wszystkich pamiętanych położeń\n"
+"      -t\twypisanie pamiętanych położeń każdej NAZWY poprzedzając\n"
+"    \t\tkażde położenie odpowiednią NAZWĄ, jeśli podano wiele NAZW\n"
+"    Argumenty:\n"
+"      NAZWA\tKażda nazwa jest wyszukiwana w $PATH i dodawana do listy\n"
+"    \t\tpamiętanych poleceń.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, chyba że nie znaleziono NAZWY lub podano błędną\n"
+"    opcjÄ™."
+
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Wyświetlenie informacji o poleceniach wbudowanych.\n"
+"    \n"
+"    Wyświetlenie krótkiego przeglądu poleceń wbudowanych. Jeśli podano\n"
+"    WZORZEC, wypisywany jest szczegółowy opis wszystkich poleceń pasujących "
+"do\n"
+"    WZORCA, w przeciwnym wypadku - lista tematów.\n"
+"    \n"
+"    Opcje:\n"
+"      -d\twypisanie krótkiego opisu każdego tematu\n"
+"      -m\twyświetlenie sposobu użycia w formacie zbliżonym do stron man\n"
+"      -s\twypisanie tylko krótkiej informacji o składni dla każdego\n"
+"    \t\ttematu pasujÄ…cego do WZORCA\n"
+"    \n"
+"    Argumenty:\n"
+"      WZORZEC\tWzorzec określający temat pomocy\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, chyba że WZORCA nie znaleziono lub podano błędną\n"
+"    opcjÄ™."
+
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Wyświetlanie i modyfikowanie listy historii.\n"
+"    \n"
+"    Wyświetlanie listy historii z numerami linii z oznaczeniem każdej\n"
+"    zmodyfikowanej linii przedrostkiem `*'. Podanie argumentu N wypisuje\n"
+"    tylko ostatnich N wpisów.\n"
+"    \n"
+"    Opcje:\n"
+"      -c\twyczyszczenie listy historii poprzez usunięcie wszystkich wpisów\n"
+"      -d offset\tusunięcie wpisu historii o podanym OFFSECIE. Ujemne "
+"offsety\n"
+"    \t\tliczą się wstecz od końca listy historii\n"
+"    \n"
+"      -a\tdołączenie linii historii z tej sesji do pliku historii\n"
+"      -n\todczyt wszystkich jeszcze nie przeczytanych linii z pliku\n"
+"    \t\thistorii i dołączenie ich do listy historii\n"
+"      -r\todczyt pliku historii i dołączenie zawartości do listy historii\n"
+"      -w\tzapis bieżącej historii do pliku historii\n"
+"    \n"
+"      -p\trozwinięcie wg historii każdego ARG i wypisanie wyniku bez\n"
+"    \t\tzapisywania go na liście historii\n"
+"      -s\tdołączenie wszystkich ARG do listy historii jako pojedynczych\n"
+"    \t\twpisów\n"
+"    \n"
+"    Jeśli podano PLIK, jest używany jako plik historii. W przeciwnym "
+"wypadku\n"
+"    używany jest $HISTFILE, a jeśli ta zmienna nie jest ustawiona -\n"
+"    ~/.bash_history.\n"
+"    \n"
+"    Jeśli zmienna $HISTTIMEFORMAT jest ustawiona i niepusta, jej wartość "
+"jest\n"
+"    używana jako łańcuch formatujący dla strftime(3) do wypisywania momentu\n"
+"    czasu powiązanego z każdym wypisywanym wpisem. W przeciwnym wypadku "
+"czas\n"
+"    nie jest wypisywany.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, chyba że podano błędną opcję lub wystąpi błąd."
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"Wyświetlenie stanu zadań.\n"
+"    \n"
+"    Wypisanie aktywnych zadań. ZADANIE ogranicza wyjście tylko do tego "
+"zadania.\n"
+"    Bez opcji wypisywany jest stan wszystkich aktywnych zadań.\n"
+"    \n"
+"    Opcje:\n"
+"      -l\twypisanie dodatkowo numerów PID procesów\n"
+"      -n\twypisanie tylko procesów, które zmieniły stan od ostatniego\n"
+"    \t\tpowiadomienia\n"
+"      -p\twypisanie tylko numerów PID procesów\n"
+"      -r\tograniczenie wyjścia do zadań działających\n"
+"      -s\tograniczenie wyjścia do zadań zatrzymanych\n"
+"    \n"
+"    Przy podaniu -x, uruchamiane jest podane POLECENIE po zastÄ…pieniu\n"
+"    każdej z występujących w argumentach ARG specyfikacji zadań numerem PID\n"
+"    procesu wiodÄ…cego danego zadania.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, chyba że podano błędną opcję lub wystąpi błąd.\n"
+"    Jeśli użyto -x, zwracany jest stan wyjściowy POLECENIA."
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"Usunięcie poleceń z bieżącej powłoki.\n"
+"    \n"
+"    Usunięcie każdego podanego ZADANIA z tablicy aktywnych zadań. Bez\n"
+"    podania ZADANIA powłoka używa pojęcia bieżącego zadania.\n"
+"    \n"
+"    Opcje:\n"
+"      -a\tusunięcie wszystkich zadań, jeśli nie podano ZADANIA\n"
+"      -h\toznaczenie każdego zadania tak, że SIGHUP nie jest wysyłany do\n"
+"    \t\tzadania, jeśli powłoka otrzyma SIGHUP\n"
+"      -r\tusunięcie tylko działających zadań\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, chyba że podano błędną opcję lub ZADANIE."
+
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Wysłanie sygnału do zadania.\n"
+"    \n"
+"    Wysłanie do procesów określonych przez PID lub ZADANIE sygnału o nazwie\n"
+"    SYGNA� lub NUMERZE-SYGNA�U. Jeśli nie podano SYGNA�U ani NUMERU-"
+"SYGNA�U,\n"
+"    przyjmowany jest SIGTERM.\n"
+"    \n"
+"    Opcje:\n"
+"      -s SYG\tSYG jest nazwą sygnału\n"
+"      -n SYG\tSYG jest numerem sygnału\n"
+"      -l\tlista nazw sygnałów; jeśli `-l' występuje z argumentami, są one\n"
+"    \t\ttraktowane jako numery sygnałów, dla których mają być wypisane "
+"nazwy\n"
+"      -L\tsynonim -l\n"
+"    \n"
+"    Kill jest poleceniem wewnętrznym z dwóch powodów: umożliwia korzystanie\n"
+"    z identyfikatorów zadań zamiast numerów PID oraz, w przypadku "
+"osiągnięcia\n"
+"    ograniczenia na liczbę procesów, nie powoduje potrzeby uruchamiania\n"
+"    dodatkowego procesu, aby jakiś zabić.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracany jest sukces, chyba że podano błędną opcję lub wystąpi błąd."
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"Obliczanie wyrażeń arytmetycznych.\n"
+"    \n"
+"    Obliczenie każdego argumentu ARG jako wyrażenia arytmetycznego. "
+"Obliczenia\n"
+"    są wykonywane dla liczb całkowitych o stałej długości bez sprawdzania\n"
+"    przepełnienia, jednakże dzielenie przez 0 jest przechwytywane i "
+"oznaczane\n"
+"    jako błąd. Poniższa lista operatorów jest pogrupowana na poziomy\n"
+"    operatorów o jednakowym priorytecie. Poziomy są wypisane w kolejności\n"
+"    malejÄ…cego priorytetu.\n"
+"    \n"
+"    \tid++, id--\tpost-inkrementacja, post-dekrementacja zmiennej\n"
+"    \t++id, --id\tpre-inkrementacja, pre-dekrementacja zmiennej\n"
+"    \t-, +\t\tjednoargumentowy minus, plus\n"
+"    \t!, ~\t\tlogiczna i bitowa negacja\n"
+"    \t**\t\tpotęgowanie\n"
+"    \t*, /, %\t\tmnożenie, dzielenie, reszta z dzielenia\n"
+"    \t+, -\t\tdodawanie, odejmowanie\n"
+"    \t<<, >>\t\tprzesunięcie bitowe w lewo i w prawo\n"
+"    \t<=, >=, <, >\tporównanie\n"
+"    \t==, !=\t\trówność, nierówność\n"
+"    \t&\t\tbitowe AND\n"
+"    \t^\t\tbitowe XOR\n"
+"    \t|\t\tbitowe OR\n"
+"    \t&&\t\tlogiczne AND\n"
+"    \t||\t\tlogiczne OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\toperator warunkowy\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tprzypisanie\n"
+"    \n"
+"    Jako operandy mogą występować zmienne powłoki. Nazwa zmiennej jest\n"
+"    zastępowana w w wyrażeniu jej wartością (po konwersji do liczby\n"
+"    całkowitej o stałej długości). Zmienna, aby mogła być użyta\n"
+"    w wyrażeniu, nie musi mieć ustawionego atrybutu integer.\n"
+"    \n"
+"    Operacje są wykonywane wg. priorytetów operatorów. Najpierw są\n"
+"    wykonywane podwyrażenia w nawiasach i mają one pierwszeństwo przed\n"
+"    powyższymi priorytetami operatorów.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Jeśli wartością ostatniego argumentu jest 0, let zwraca 1;\n"
+"    w pozostałych przypadkach zwracane jest 0."
+
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"Odczyt wiersza ze standardowego wejścia i podział go na pola.\n"
+"    \n"
+"    Odczytanie wiersza ze standardowego wejścia lub deskryptora FD (jeśli\n"
+"    podano opcję -u). Wiersz jest dzielony na pola wg reguł podziału na "
+"słowa,\n"
+"    pierwsze słowo jest przypisywane pierwszej NAZWIE, drugie - drugiej "
+"NAZWIE\n"
+"    itd.; wszystkie pozostałe słowa są przypisywane ostatniej NAZWIE. Jako\n"
+"    ograniczniki słów są rozpoznawane tylko znaki ze zmiennej $IFS.\n"
+"    \n"
+"    Jeśli nie podano NAZW, odczytany wiersz jest zapisywany w zmiennej "
+"REPLY.\n"
+"    \n"
+"    Opcje:\n"
+"      -a tablica\tprzypisanie odczytanych słów do indeksów sekwencyjnych\n"
+"    \t\tzmiennej tablicowej TABLICA, poczÄ…wszy od zera\n"
+"      -d ogr\tkontynuacja do odczytu pierwszego znaku OGR zamiast znaku "
+"nowej\n"
+"    \t\tlinii\n"
+"      -e\tużycie Readline'a do odczytania wiersza\n"
+"      -o tekst\tużycie TEKSTU jako początkowego tekstu dla Readline'a\n"
+"      -n liczba\tpowrót po odczycie LICZBY znaków zamiast oczekiwania na\n"
+"    \t\tznak nowej linii; ogranicznik jest honorowany, jeśli odczytano "
+"mniej\n"
+"    \t\tniż podana LICZBA znaków przed ogranicznikiem\n"
+"      -N liczba\tpowrót tylko po odczycie dokładnie podanej LICZBY znaków,\n"
+"    \t\tchyba że zostanie napotkany EOF lub opłynie czas; ograniczniki są\n"
+"    \t\tignorowane\n"
+"      -p zachęta\twypisanie łańcucha ZACHĘTY bez końcowego znaku nowej "
+"linii\n"
+"    \t\tprzed próbą odczytu\n"
+"      -r\twyłączenie interpretowania odwrotnych ukośników jako przedrostka\n"
+"    \t\tznaków specjalnych\n"
+"      -s\tbez wypisywania wejścia pochodzącego z terminala\n"
+"      -t czas\tzakończenie i zwrócenie niepowodzenia, jeśli nie zostanie\n"
+"    \t\todczytany cały wiersz przed upłynięciem podanego CZASU (w "
+"sekundach).\n"
+"    \t\tWartość zmiennej TMOUT jest domyślnym limitem czasu. CZAS może być\n"
+"    \t\tułamkowy. Przy wartości 0 odczyt powiedzie się tylko wtedy, gdy\n"
+"    \t\twejście jest dostępne na podanym deskryptorze. Kod (stan) wyjściowy\n"
+"    \t\tw przypadku osiągnięcia limitu czasu jest większy niż 128\n"
+"      -u fd\todczyt z deskryptora pliku FD zamiast ze standardowego wejścia\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest wartość 0, chyba że zostanie napotkany koniec pliku,\n"
+"    osiągnięty limit czasu (w tym przypadku jest większy niż 128), wystąpi\n"
+"    błąd przypisania zmiennej albo podano nieprawidłowy deskryptor dla\n"
+"    argumentu -u."
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"Powrót z funkcji powłoki.\n"
+"    \n"
+"    Polecenie powoduje, że funkcja lub włączony skrypt kończy się zwracając\n"
+"    wartość podaną jako N. Jeśli pominięto N, stanem wyjściowym będzie stan\n"
+"    ostatniego polecenia wykonanego w funkcji lub skrypcie.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracane jest N lub niepowodzenie, jeśli powłoka nie wykonuje żadnej\n"
+"    funkcji ani skryptu."
+
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"Ustawianie lub anulowanie opcji powłoki i parametrów pozycyjnych.\n"
+"    \n"
+"    Zmiana wartości atrybutów powłoki i parametrów pozycyjnych lub\n"
+"    wyświetlenie nazw i wartości zmiennych powłoki.\n"
+"    \n"
+"    Opcje:\n"
+"      -a  Oznaczenie zmiennych, które zostały zmodyfikowane lub utworzone\n"
+"          jako eksportowane.\n"
+"      -b  Natychmiastowe powiadomienie o zakończeniu zadania.\n"
+"      -e  Natychmiastowe zakończenie, gdy polecenie zakończy się z\n"
+"          niezerowym stanem (kodem powrotu).\n"
+"      -f  Wyłączenie generowania nazw plików (globbing).\n"
+"      -h  Pamiętanie położenia znalezionych poleceń.\n"
+"      -k  Umieszczanie w środowisku polecenia wszystkich argumentów\n"
+"          o postaci przypisania, nie tylko tych, które poprzedzają nazwę\n"
+"          polecenia.\n"
+"      -m  Włączenie kontroli zadań.\n"
+"      -n  Czytanie poleceń bez wykonywania ich.\n"
+"      -o nazwa-opcji\n"
+"          Ustawienie zmiennej odpowiadajÄ…cej nazwa-opcji:\n"
+"              allexport    to samo, co -a\n"
+"              braceexpand  to samo, co -B\n"
+"              emacs        korzystanie z interfejsu edycji wiersza w stylu\n"
+"                           emacsa\n"
+"              errexit      to samo, co -e\n"
+"              errtrace     to samo, co -E\n"
+"              functrace    to samo, co -T\n"
+"              hashall      to samo, co -h\n"
+"              histexpand   to samo, co -H\n"
+"              history      włączenie historii poleceń\n"
+"              ignoreeof    niekończenie powłoki po odczytaniu EOF\n"
+"              interactive-comments\n"
+"                           zezwolenie na wystÄ…pienie komentarzy\n"
+"                           w poleceniach interaktywnych\n"
+"              keyword      to samo, co -k\n"
+"              monitor      to samo, co -m\n"
+"              noclobber    to samo, co -C\n"
+"              noexec       to samo, co -n\n"
+"              noglob       to samo, co -f\n"
+"              nolog        aktualnie akceptowane ale ignorowane\n"
+"              notify       to samo, co -b\n"
+"              nounset      to samo, co -u\n"
+"              onecmd       to samo, co -t\n"
+"              physical     to samo, co -P\n"
+"              pipefail     kodem powrotu potoku jest kod powrotu ostatniego\n"
+"                           polecenia kończącego się z niezerowym kodem lub\n"
+"                           zero, gdy żadne polecenie nie zakończyło się z\n"
+"                           niezerowym kodem powrotu\n"
+"              posix        zmiana zachowania basha, gdy standardowe\n"
+"                           zachowanie operacji różni się od standardu\n"
+"                           POSIX na zgodne ze standardem\n"
+"              privileged   to samo, co -p\n"
+"              verbose      to samo, co -v\n"
+"              vi           korzystanie z interfejsu edycji wiersza w stylu "
+"vi\n"
+"              xtrace       to samo, co -x\n"
+"      -p  WÅ‚Ä…czone, gdy nie zgadzajÄ… siÄ™ rzeczywisty i efektywny ID\n"
+"            użytkownika. Wyłącza przetwarzanie pliku $ENV oraz import "
+"funkcji\n"
+"            powłoki. Wyłączenie tej opcji powoduje, że efektywne UID i GID\n"
+"            zostanÄ… ustawione na rzeczywiste UID i GID.\n"
+"      -t  Zakończenie po przeczytaniu i uruchomieniu jednego polecenia.\n"
+"      -u  Traktowanie podczas podstawienia nieustawionych zmiennych jako\n"
+"          błędów.\n"
+"      -v  Wypisywanie wejścia powłoki tak, jak zostało przeczytane.\n"
+"      -x  Wypisywanie poleceń i ich argumentów tak, jak są uruchamiane.\n"
+"      -B  Przeprowadzanie przez powłokę rozwijania nawiasów.\n"
+"      -C  Gdy ustawione, niepozwalanie na nadpisywanie istniejÄ…cych\n"
+"          zwykłych plików przez przekierowanie wyjścia.\n"
+"      -E  Gdy ustawione, dziedziczenie pułapki ERR przez funkcje powłoki.\n"
+"      -H  WÅ‚Ä…czenie podstawienia historii w stylu `!'. Znacznik ten jest\n"
+"          domyślnie włączony dla powłoki interaktywnej.\n"
+"      -P  Gdy ustawione, nierozwiązywanie dowiązań symbolicznych podczas\n"
+"          uruchamiania poleceń takich, jak cd, które zmieniają katalog\n"
+"          bieżący.\n"
+"      -T  Gdy ustawione, dziedziczenie pułapek DEBUG i RETURN przez "
+"funkcje.\n"
+"      --  Przypisanie pozostałych argumentów do parametrów pozycyjnych.\n"
+"          Jeśli nie ma więcej argumentów, parametry pozycyjne są anulowane.\n"
+"      -   Przypisanie pozostałych argumentów do argumentów pozycyjnych.\n"
+"          Wyłączenie opcji -x i -v.\n"
+"    \n"
+"    Użycie + zamiast - powoduje wyłączenie powyższych znaczników. Można z "
+"nich\n"
+"    także korzystać przy uruchomieniu powłoki. Aktualny zestaw opcji można\n"
+"    znaleźć w $-. Pozostałe n argumentów staje się parametrami pozycyjnymi\n"
+"    i sÄ… one przypisane, kolejno, do $1, $2, .. $n. Gdy nie zostanÄ… podane\n"
+"    żadne argumenty, wypisywane są wszystkie zmienne powłoki.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, chyba że podano nieprawidłową opcję."
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"Anulowanie wartości i atrybutów zmiennych i funkcji powłoki.\n"
+"    \n"
+"    Usunięcie zmiennych i funkcji o podanych NAZWACH.\n"
+"    \n"
+"    Opcje:\n"
+"      -f\tpotraktowanie wszystkich NAZW jako funkcji powłoki\n"
+"      -v\tpotraktowanie wszystkich NAZW jako zmiennych powłoki\n"
+"      -n\tpotraktowanie wszystkich NAZW jako referencji do nazw\n"
+"    \t\ti anulowanie samej zmiennej zamiast tej, do której się odnosi\n"
+"    \n"
+"    Bez opcji unset próbuje najpierw anulować definicję zmiennej, a jeśli "
+"to\n"
+"    się nie powiedzie, próbuje anulować definicję funkcji.\n"
+"    \n"
+"    Niektórych zmiennych nie można usunąć - p. `readonly'.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, chyba że podano błędną opcję lub NAZWA jest tylko "
+"do\n"
+"    odczytu."
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Ustawienie atrybutu eksportowania dla zmiennych powłoki.\n"
+"    \n"
+"    Zaznaczenie każdej NAZWY do automatycznego eksportowania do środowiska\n"
+"    później wywoływanych poleceń. Jeśli podano WARTOŚĆ, jest ona "
+"przypisywana\n"
+"    przed eksportowaniem.\n"
+"    \n"
+"    Opcje:\n"
+"      -f\tdziałanie na funkcjach powłoki\n"
+"      -n\tusunięcie atrybutu eksportowania z każdej NAZWY\n"
+"      -p\twyświetlenie listy wszystkich eksportowanych zmiennych i funkcji\n"
+"    \n"
+"    Argument `--' kończy dalsze przetwarzanie opcji.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, chyba że podano nieprawidłową opcję lub NAZWĘ."
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Oznaczenie zmiennych powłoki jako niezmiennych.\n"
+"    \n"
+"    Oznaczenie każdej NAZWY jako tylko do odczytu; wartości tych NAZW nie "
+"mogÄ…\n"
+"    być zmieniane przez późniejsze podstawienia. Jeśli podano WARTOŚĆ, jest\n"
+"    ona przypisywana przed oznaczeniem jako tylko do odczytu.\n"
+"    \n"
+"    Opcje:\n"
+"      -a\tdziałanie na zmiennych tablicowych indeksowanych\n"
+"      -A\tdziałanie na zmiennych tablicowych asocjacyjnych\n"
+"      -f\tdziałanie na funkcjach powłoki\n"
+"      -p\twyświetlenie listy wszystkich zmiennych lub funkcji tylko do "
+"odczytu,\n"
+"    \t\tw zależności od tego, czy podano opcję -f\n"
+"    \n"
+"    Argument `--' wyłącza dalsze przetwarzanie opcji.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, chyba że podano nieprawidłową opcję lub NAZWĘ."
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"Przesunięcie argumentów pozycyjnych.\n"
+"    \n"
+"    Zmiana nazw argumentów pozycyjnych $N+1,$N+2 ... na $1,$2 ...\n"
+"    Jeśli nie podano N, przyjmuje się 1.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, chyba że N jest ujemne lub większe niż $#."
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Wykonanie poleceń z pliku w bieżącej powłoce.\n"
+"    \n"
+"    Odczytanie i uruchomienie poleceń z PLIKU w bieżącej powłoce. Do\n"
+"    znalezienia katalogu zawierającego PLIK używane są ścieżki zawarte\n"
+"    w $PATH. Jeśli podane zostaną jakiekolwiek ARGUMENTY, stają się\n"
+"    parametrami pozycyjnymi podczas uruchomienia PLIKU.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracany jest stan ostatnio wykonanego polecenia z PLIKU lub błąd, "
+"jeśli\n"
+"    PLIKU nie udało się odczytać."
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Wstrzymanie wykonywania powłoki.\n"
+"    \n"
+"    Wstrzymanie wykonywania danego skryptu do czasu otrzymania sygnału\n"
+"    SIGCONT. Jeśli nie podano opcji wymuszenia, powłoki logowania nie można\n"
+"    wstrzymać.\n"
+"    \n"
+"    Opcje:\n"
+"      -f\twymuszenie wstrzymania, nawet jeśli powłoka jest powłoką "
+"logowania\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, chyba że kontrola zadań jest wyłączona lub "
+"wystÄ…pi\n"
+"    błąd."
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"Obliczenie wyrażenia warunkowego.\n"
+"    \n"
+"    Polecenie zwracające kod 0 (prawda) lub 1 (fałsz) w zależności od "
+"wyniku\n"
+"    obliczenia WYRAŻENIA. Wyrażenia mogą mieć postać jedno- lub "
+"dwuargumentowÄ….\n"
+"    Jednoargumentowe wyrażenia służą zwykle do badania stanu pliku. "
+"IstniejÄ…\n"
+"    również operatory działające na łańcuchach tekstowych, jak też "
+"operatory\n"
+"    numerycznego porównania.\n"
+"    \n"
+"    Zachowanie polecenia test zależy od liczby argumentów. Pełną "
+"specyfikacjÄ™\n"
+"    można znaleźć w podręczniku man do basha.\n"
+"    \n"
+"    Operatory plikowe:\n"
+"    \n"
+"      -a PLIK        Prawda, gdy PLIK istnieje.\n"
+"      -b PLIK        Prawda, gdy PLIK jest plikiem specjalnym urzÄ…dzenia\n"
+"                     blokowego.\n"
+"      -c PLIK        Prawda, gdy PLIK jest plikiem specjalnym urzÄ…dzenia\n"
+"                     znakowego.\n"
+"      -d PLIK        Prawda, gdy PLIK jest katalogiem.\n"
+"      -e PLIK        Prawda, gdy PLIK istnieje.\n"
+"      -f PLIK        Prawda, gdy PLIK istnieje i jest zwykłym plikiem.\n"
+"      -g PLIK        Prawda, gdy PLIK ma ustawiony bit SGID.\n"
+"      -h PLIK        Prawda, gdy PLIK jest dowiÄ…zaniem symbolicznym.\n"
+"      -L PLIK        Prawda, gdy PLIK jest dowiÄ…zaniem symbolicznym.\n"
+"      -k PLIK        Prawda, gdy PLIK ma ustawiony bit `sticky'.\n"
+"      -p PLIK        Prawda, gdy PLIK jest nazwanym potokiem.\n"
+"      -r PLIK        Prawda, gdy PLIK jest odczytywalny przez użytkownika.\n"
+"      -s PLIK        Prawda, gdy PLIK istnieje i jest niepusty.\n"
+"      -S PLIK        Prawda, gdy PLIK jest gniazdem.\n"
+"      -t FD          Prawda, gdy deskryptor FD jest otwarty na terminalu.\n"
+"      -u FILE        Prawda, gdy PLIK ma ustawiony bit SUID.\n"
+"      -w FILE        Prawda, gdy PLIK jest zapisywalny przez użytkownika.\n"
+"      -x FILE        Prawda, gdy PLIK jest uruchamialny przez użytkownika.\n"
+"      -O FILE        Prawda, gdy użytkownik jest efektywnym właścicielem "
+"PLIKU.\n"
+"      -G FILE        Prawda, grupa użytkownika jest efektywnym właścicielem\n"
+"                     PLIKU.\n"
+"      -N FILE        Prawda, gdy PLIK został zmodyfikowany po ostatnim\n"
+"                     odczycie.\n"
+"    \n"
+"      PLIK1 -nt PLIK2  Prawda, gdy PLIK1 jest nowszy niż PLIK2 (porównując\n"
+"                       czas ostatniej modyfikacji).\n"
+"    \n"
+"      PLIK1 -ot PLIK2  Prawda, gdy PLIK1 jest starszy niż PLIK2.\n"
+"    \n"
+"      PLIK1 -ef PLIK2  Prawda, gdy PLIK1 jest twardym dowiÄ…zaniem do PLIK2.\n"
+"    \n"
+"    Operatory łańcuchowe:\n"
+"    \n"
+"      -z �AŃCUCH     Prawda, gdy �AŃCUCH jest pusty.\n"
+"    \n"
+"      -n �AŃCUCH\n"
+"         �AŃCUCH     Prawda, gdy �AŃCUCH nie jest pusty.\n"
+"    \n"
+"      �AŃCUCH1 = �AŃCUCH2\n"
+"                     Prawda, gdy �AŃCUCH1 i �AŃCUCH2 są równe.\n"
+"      �AŃCUCH1 != �AŃCUCH2\n"
+"                     Prawda, gdy �AŃCUCH1 i �AŃCUCH2 nie są równe.\n"
+"      �AŃCUCH1 < �AŃCUCH2\n"
+"                     Prawda, gdy �AŃCUCH1 znajduje się w porządku\n"
+"                     leksykograficznym przed �AŃCUCHEM2.\n"
+"      �AŃCUCH1 > �AŃCUCH2\n"
+"                     Prawda, gdy �AŃCUCH1 znajduje się w porządku\n"
+"                     leksykograficznym po �AŃCUCHU2.\n"
+"    \n"
+"    Inne operatory:\n"
+"    \n"
+"      -o OPCJA       Prawda, gdy podana OPCJA powłoki jest włączona.\n"
+"      -v ZMIENNA     Prawda, gdy ZMIENNA powłoki jest ustawiona\n"
+"      -R ZMIENNA     Prawda, gdy zmienna powłoki jest ustawiona i jest\n"
+"                     referencjÄ… do nazwy\n"
+"      ! WYRAŻENIE    Prawda, gdy WYRAŻENIE jest fałszywe.\n"
+"      WYR1 -a WYR2   Prawda, gdy zarówno WYR1, jak i WYR2 są prawdziwe.\n"
+"      WYR1 -o WYR2   Prawda, gdy WYR1 lub WYR2 jest prawdziwe.\n"
+"    \n"
+"      arg1 OP arg2   Testy arytmetyczne. OP jest jednym z operatorów:\n"
+"                     -eq, -ne, -lt, -le, -gt lub -ge.\n"
+"    \n"
+"    Dwuargumentowe operatory arytmetyczne zwracajÄ… prawdÄ™, gdy ARG1 jest\n"
+"    równy, nierówny, mniejszy niż, mniejszy lub równy, większy niż lub\n"
+"    większy lub równy ARG2.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, jeśli wartością WYRAŻENIA jest prawda; fałsz, gdy\n"
+"    wartością WYRAŻENIA jest fałsz lub podano błędny argument."
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Obliczenie wyrażenia warunkowego.\n"
+"    \n"
+"    Jest to synonim dla wbudowanego polecenia \"test\", ale wymagajÄ…cy, by\n"
+"    ostatnim argumentem był `]' pasujący do początkowego `['."
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Wyświetlenie czasów procesu.\n"
+"    \n"
+"    Wypisanie łącznych czasów w przestrzeni użytkownika i systemu dla "
+"powłoki\n"
+"    i wszystkich procesów potomnych.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zawsze prawda."
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"Przechwytywanie sygnałów i innych zdarzeń.\n"
+"    \n"
+"    Polecenie definiujące i włączające daną akcję w przypadku, kiedy "
+"powłoka\n"
+"    otrzyma sygnał lub pod innymi warunkami.\n"
+"    \n"
+"    Gdy powłoka otrzyma podany SYGNA� (lub sygnały), odczytywane i "
+"uruchamiane\n"
+"    jest polecenie podane jako argument ARG. W razie braku argumentu (i "
+"podaniu\n"
+"    pojedynczego SYGNA�U) lub gdy argumentem jest `-', każdemu z podanych\n"
+"    sygnałów jest przywracane pierwotne zachowanie. Jeśli ARG jest pustym\n"
+"    łańcuchem, każdy SYGNA� jest ignorowany przez powłokę i wywołane przez "
+"niÄ…\n"
+"    polecenia.\n"
+"    \n"
+"    Jeżeli jako SYGNA� podano EXIT (0), polecenie ARG jest uruchamiane przy\n"
+"    opuszczaniu powłoki. Jeśli jako SYGNA� podano DEBUG, ARG jest "
+"uruchamiane\n"
+"    po każdym poleceniu prostym. Jeśli jako SYGNA� podano RETURN, ARG jest\n"
+"    uruchamiane przy każdym zakończeniu funkcji powłoki lub skryptu\n"
+"    uruchamianego przez polecenia wbudowane . lub source. Jeśli jako SYGNA�\n"
+"    podano ERR, ARG jest uruchamiane za każdym razem, kiedy niepowodzenie\n"
+"    polecenia spowodowałoby zakończenie powłoki w przypadku włączenia opcji -"
+"e.\n"
+"    \n"
+"    Jeśli nie podano argumentów, trap wypisuje listę poleceń przypisanych "
+"do\n"
+"    każdego sygnału.\n"
+"    \n"
+"    Opcje:\n"
+"      -l\twypisanie listy nazw sygnałów i ich numerów\n"
+"      -p\twypisanie poleceń trap powiązanych z każdym SYGNA�EM\n"
+"    \n"
+"    Każdy podawany SYGNA� może być nazwą sygnału wg. <signal.h> lub numerem\n"
+"    sygnału. Nazwy sygnałów są niewrażliwe na wielkość liter, a prefiks SIG\n"
+"    jest opcjonalny. Sygnał do powłoki można wysłać poleceniem\n"
+"    \"kill -sygnał $$\".\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, chyba że podano błędny SYGNA� lub błędną opcję."
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"Wyświetlenie informacji o rodzaju polecenia.\n"
+"    \n"
+"    Określenie, w jaki sposób byłaby interpretowana każda NAZWA w przypadku\n"
+"    użycia jako polecenie.\n"
+"    \n"
+"    Opcje:\n"
+"      -a\twyświetlenie wszystkich położeń zawierających program wykonywalny\n"
+"    \t\to podanej NAZWIE; obejmuje aliasy, polecenia wbudowane i funkcje\n"
+"    \t\ttylko jeśli nie podano dodatkowo opcji `-p'\n"
+"      -f\tpominięcie wyszukiwania funkcji powłoki\n"
+"      -P\twymuszenie wyszukiwania w PATH każdej nazwy, nawet jeśli jest\n"
+"    \t\taliasem, poleceniem wbudowanym lub funkcją i zwrócenie nazwy pliku\n"
+"    \t\tna dysku\n"
+"      -p\tzwrócenie nazwy pliku na dysku lub niczego, jeśli `type -t NAZWA'\n"
+"    \t\tnie zwróciłoby `file'.\n"
+"      -t\tzwrócenie pojedynczego słowa: `alias', `keyword', `function',\n"
+"    \t\t`builtin', `file' lub `', jeśli nazwa jest odpowiednio: aliasem,\n"
+"    \t\tzarezerwowanym słowem kluczowym powłoki, funkcją powłoki, "
+"poleceniem\n"
+"    \t\twbudowanym powłoki, plikiem na dysku lub nie zostanie znaleziona\n"
+"    \n"
+"    Argumenty:\n"
+"      NAZWA\tNazwa polecenia do zinterpretowania.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, jeśli każda NAZWA zostanie znaleziona; fałsz, "
+"jeśli\n"
+"    którakolwiek nie zostanie znaleziona."
+
+#: builtins.c:1431
+#, fuzzy
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Modyfikowanie limitów zasobów powłoki.\n"
+"    \n"
+"    Ulimit zapewnia kontrolę ilości zasobów udostępnionych powłoce i "
+"procesom\n"
+"    w systemach, które taką kontrolę umożliwiają.\n"
+"    \n"
+"    Opcje:\n"
+"      -S\tkorzystanie z \"miękkiego\" limitu zasobów\n"
+"      -H\tkorzystanie ze \"sztywnego\" limitu zasobów\n"
+"      -a\twypisanie wszystkich aktualnych limitów\n"
+"      -b\trozmiar bufora dla gniazd\n"
+"      -c\tmaksymalny rozmiar tworzonych plików core\n"
+"      -d\tmaksymalny rozmiar segmentu danych procesu\n"
+"      -e\tmaksymalny priorytet szeregowania procesów (`nice')\n"
+"      -f\tmaksymalny rozmiar plików zapisywanych przez powłokę i jej "
+"potomków\n"
+"      -i\tmaksymalna liczba oczekujących sygnałów\n"
+"      -k\tmaksymalna liczba kolejek jÄ…dra (kqueue) przydzielonych dla "
+"procesu\n"
+"      -l\tmaksymalny rozmiar pamięci, którą proces może zablokować\n"
+"      -m\tmaksymalny rozmiar obszaru rezydentnego procesu\n"
+"      -n\tmaksymalna liczba otwartych deskryptorów plików\n"
+"      -p\trozmiar bufora potoku\n"
+"      -q\tmaksymalna liczba bajtów w POSIX-owych kolejkach komunikatów\n"
+"      -r\tmaksymalny priorytet szeregowania dla procesów czasu "
+"rzeczywistego\n"
+"      -s\tmaksymalny rozmiar stosu\n"
+"      -t\tmaksymalna ilość czasu procesora w sekundach\n"
+"      -u\tmaksymalna liczba procesów użytkownika\n"
+"      -v\trozmiar pamięci wirtualnej\n"
+"      -x\tmaksymalna liczba blokad plików\n"
+"      -P\tmaksymalna liczba pseudoterminali\n"
+"      -T\tmaksymalna liczba wątków\n"
+"    \n"
+"    Nie wszystkie opcje są dostępne na wszystkich platformach.\n"
+"    \n"
+"    Gdy podano wartość LIMITU, stanowi ona nową wartość ograniczenia dla\n"
+"    danego zasobu; specjalne wartości LIMITU: `soft', `hard' i `unlimited'\n"
+"    oznaczają, odpowiednio, aktualne ograniczenie miękkie, sztywne i brak\n"
+"    ograniczenia. W przeciwnym przypadku wypisywana jest aktualna wartość\n"
+"    podanego ograniczenia. Gdy nie podano opcji, przyjmuje się, że podano -"
+"f.\n"
+"    \n"
+"    Wartości są podawane w jednostkach 1024-bajtowych, za wyjątkiem -t, "
+"które\n"
+"    jest w sekundach, -p, które jest w jednostkach 512-bajtowych oraz -u, "
+"które\n"
+"    jest bezwymiarową liczbą procesów.\n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, chyba że podano błędną opcję lub wystąpi błąd."
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"Wyświetlanie i ustawianie maski uprawnień plików.\n"
+"    \n"
+"    Ustawienie maski uprawnień tworzonych plików na UPRAWNIENIA. Jeśli\n"
+"    pominięto UPRAWNIENIA, wypisywana jest aktualna wartość maski.\n"
+"    \n"
+"    Jeśli UPRAWNIENIA zaczynają się od cyfry, są interpretowane jako liczba\n"
+"    ósemkowa; w przeciwnym wypadku jako łańcuch symbolicznych uprawnień,\n"
+"    jak w poleceniu chmod(1).\n"
+"    \n"
+"    Opcje:\n"
+"      -p\tjeśli pominięto UPRAWNIENIA, wypisywanie w formie nadającej się\n"
+"    \tdo ponownego użycia jako wejście\n"
+"      -S\twyjście w postaci symbolicznej; bez tej opcji jest ósemkowe\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, chyba że podano błędne uprawnienia lub błędną "
+"opcjÄ™."
+
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"Oczekiwanie na zakończenie zadania i zwrócenie stanu (kodu) wyjścia.\n"
+"    \n"
+"    Oczekiwanie na każdy proces o podanym identyfikatorze ID, który może "
+"być\n"
+"    numerem PID lub określeniem zadania i zgłoszenie jego stanu (kodu)\n"
+"    zakończenia. Jeśli nie podano ID, polecenie oczekuje na wszystkie "
+"aktualnie\n"
+"    aktywne procesy potomne i zwraca prawdę. Jeśli ID jest określeniem "
+"zadania,\n"
+"    oczekuje na wszystkie procesy w potoku przetwarzania danego zadania.\n"
+"    \n"
+"    Jeśli podano opcję -n, oczekiwanie na zakończenie następnego zadania\n"
+"    i zwrócenie jego kodu zakończenia.\n"
+"    \n"
+"    Jeśli podano opcję -f, a kontrola zadań jest włączona, oczekiwanie na\n"
+"    zakończenie podanego ID zamiast czekania na zmianę jego stanu.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracany jest stan zakończenia ID; niepowodzenie, jeśli ID jest\n"
+"    nieprawidłowe lub podano błędną opcję."
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"Oczekiwanie na zakończenie procesu i zwrócenie stanu (kodu) wyjścia.\n"
+"    \n"
+"    Oczekiwanie na każdy z procesów podany przez PID i zgłoszenie jego "
+"statusu\n"
+"    zakończenia. Gdy nie zostanie podany PID, oczekiwanie dotyczy "
+"wszystkich\n"
+"    aktualnie aktywnych procesów potomnych, a kodem powrotu jest zero. PID "
+"musi\n"
+"    być identyfikatorem procesu.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracany jest status ID lub niepowodzenie, jeśli ID jest błędny lub "
+"podano\n"
+"    nieprawidłową opcję."
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Wykonanie poleceń dla każdego elementu z listy.\n"
+"    \n"
+"    Pętla `for' uruchamia ciąg poleceń dla każdego elementu podanej listy. "
+"Gdy\n"
+"    nie zostanie podane `in S�OWA ...;', zakłada się, że podano `in \"$@"
+"\"'.\n"
+"    Dla każdego elementu S�ÓW, NAZWA jest ustawiana na ten element\n"
+"    i uruchamiane sÄ… POLECENIA.    \n"
+"    Stan wyjściowy:\n"
+"    Zwracany jest status zakończenia ostatniego wykonanego polecenia."
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Arytmetyczna pętla for.\n"
+"    \n"
+"    Równoważne\n"
+"    \t(( WYR1 ))\n"
+"    \twhile (( WYR2 )); do\n"
+"    \t\tPOLECENIA\n"
+"    \t\t(( WYR3 ))\n"
+"    \tdone\n"
+"    WYR1, WYR2 i WYR3 są wyrażeniami arytmetycznymi. Jeśli któreś z wyrażeń\n"
+"    zostanie pominięte, zachowanie jest takie, jakby miało ono wartość "
+"1.    \n"
+"    Stan wyjściowy:\n"
+"    Zwracany jest status zakończenia ostatniego wykonanego polecenia."
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Wybór słów z listy i wykonanie poleceń.\n"
+"    S�OWA są rozwijane, co tworzy listę słów. Zbiór rozwiniętych słów\n"
+"    wypisywany jest na standardowym wyjściu diagnostycznym, a każde słowo "
+"jest\n"
+"    poprzedzone przez liczbę. Gdy nie zostanie podane `in S�OWA', zakłada\n"
+"    się, że podano `in \"$@\"'. Wyświetlany jest wówczas tekst zachęty PS3\n"
+"    i odczytywany jest wiersz ze standardowego wejścia. Gdy wiersz ten "
+"składa\n"
+"    się z liczby przypisanej do jednego z wypisanych słów, to NAZWA jest\n"
+"    ustawiana na to słowo. Gdy wiersz jest pusty, S�OWA i tekst zachęty są\n"
+"    wyświetlane ponownie. Gdy odczytany zostanie EOF, polecenie się kończy.\n"
+"    Każda inna wartość powoduje przypisanie NAZWIE wartości pustej. "
+"Odczytany\n"
+"    wiersz jest zachowywany w zmiennej REPLY. Po każdym wyborze uruchamiane\n"
+"    są POLECENIA aż do polecenia break.    \n"
+"    Stan wyjściowy:\n"
+"    Zwracany jest status zakończenia ostatniego wykonanego polecenia."
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"Zgłoszenie czasu zajętego przez wykonanie potoku poleceń.\n"
+"    \n"
+"    Uruchomienie POTOKU poleceń i wypisanie podsumowania zawierającego czas\n"
+"    rzeczywisty, czas procesora w trybie użytkownika oraz czas procesora\n"
+"    w trybie systemu, jakie spędził POTOK poleceń do chwili zakończenia.\n"
+"    \n"
+"    Opcje:\n"
+"      -p\twypisanie podsumowania czasów w przenośnym formacie POSIX\n"
+"    \n"
+"    Jako format danych wyjściowych używana jest wartość zmiennej "
+"TIMEFORMAT.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Polecenie zwraca status zakończenia POTOKU poleceń."
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Wykonanie poleceń w oparciu o dopasowanie do wzorców.\n"
+"    \n"
+"    Wybiórcze uruchamianie POLECEŃ w zależności od tego, czy S�OWO pasuje\n"
+"    do WZORCA. Znak `|' służy do rozdzielania wielu wzorców.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracany jest status zakończenia ostatniego wykonanego polecenia."
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Wykonanie poleceń w zależności od spełnienia warunku.\n"
+"    \n"
+"    Uruchamiana jest lista `if POLECENIA'. Gdy jej kod powrotu jest zerem,\n"
+"    uruchamiana jest lista `then POLECENIA'. W przeciwnym przypadku\n"
+"    uruchamiane są poszczególne listy `elif POLECENIA' i, jeśli kod powrotu\n"
+"    takiej listy jest zerem, uruchamiana jest odpowiednia lista\n"
+"    `then POLECENIA', po czym polecenie if się kończy. W przeciwnym "
+"przypadku\n"
+"    uruchamiana jest lista `else POLECENIA', jeśli taka istnieje. Kodem\n"
+"    zakończenia całej konstrukcji jest kod zakończenia ostatniego\n"
+"    uruchomionego polecenia lub zero, gdy żaden ze sprawdzanych warunków\n"
+"    nie był prawdziwy.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracany jest status zakończenia ostatniego wykonanego polecenia."
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Wykonywanie poleceń dopóki test kończy się powodzeniem.\n"
+"    \n"
+"    Rozwijanie i uruchamianie POLECEŃ dopóki ostatnie polecenie\n"
+"    w POLECENIACH `while' kończy się z kodem zero.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracany jest status zakończenia ostatniego wykonanego polecenia."
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Wykonywanie poleceń dopóki test nie kończy się powodzeniem.\n"
+"    \n"
+"    Rozwijanie i uruchamianie POLECEŃ dopóki ostatnie polecenie\n"
+"    w POLECENIACH `until' kończy się z kodem niezerowym.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracany jest status zakończenia ostatniego wykonanego polecenia."
+
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"Utworzenie koprocesu o podanej NAZWIE.\n"
+"    \n"
+"    Asynchroniczne wykonanie POLECENIA ze standardowym wyjściem i "
+"standardowym\n"
+"    wejściem polecenia połączonych potokiem z deskryptorami plików\n"
+"    przypisanymi do indeksów 0 i 1 zmiennej tablicowej NAZWA w powłoce.\n"
+"    Domyślną NAZWĄ jest \"COPROC\".\n"
+"    Stan wyjściowy:\n"
+"    Polecenie coproc zwraca status wyjścia 0."
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"Zdefiniowanie funkcji powłoki.\n"
+"    \n"
+"    Utworzenie funkcji powłoki o podanej NAZWIE. Przy wywołaniu jako "
+"zwykłego\n"
+"    polecenia NAZWA uruchamia POLECENIA w kontekście powłoki wywołującej.\n"
+"    Przy wywoływaniu NAZWY, argumenty są przekazywane do funkcji jako $1..."
+"$n,\n"
+"    a nazwa funkcji w $FUNCNAME.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracany jest sukces, chyba że NAZWA jest tylko do odczytu."
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Grupowanie poleceń jako jednostki.\n"
+"    \n"
+"    Uruchomienie zbioru poleceń jako grupy. W ten sposób można przekierować\n"
+"    cały zbiór poleceń.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracany jest status zakończenia ostatniego wykonanego polecenia."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"Wznowienie zadania jako pierwszoplanowego.\n"
+"    \n"
+"    Równoważne argumentowi ZADANIE polecenia `fg'. Wznowienie zatrzymanego "
+"lub\n"
+"    działającego w tle zadania. ZADANIE może określać nazwę zadania albo "
+"jego\n"
+"    numer. Umieszczenie `&' po ZADANIU umieszcza zadanie w tle tak, jak to "
+"siÄ™\n"
+"    dzieje po podaniu specyfikacji zadania jako argumentu dla `bg'.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracany jest stan wznowionego zadania."
+
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Obliczenie wyrażenia arytmetycznego.\n"
+"    \n"
+"    Obliczenie WYRAŻENIA zgodnie z zasadami obliczania wyrażeń "
+"arytmetycznych.\n"
+"    Równoważne \"let WYRAŻENIE\".\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracane jest 1, jeśli wartością WYRAŻENIA jest 0; 0 w przeciwnym "
+"wypadku."
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"Wykonanie polecenia warunkowego.\n"
+"    \n"
+"    Zwracany jest status wynoszący 0 lub 1 w zależności od wyniku WYRAŻENIA\n"
+"    warunkowego. Wyrażenia są tworzone na tych samych zasadach, co w "
+"poleceniu\n"
+"    `test' i mogą być łączone za pomocą następujących operatorów:\n"
+"    \n"
+"      ( WYRAŻENIE )\tzwraca wartość WYRAŻENIA\n"
+"      ! WYRAŻENIE\tprawdziwe, gdy WYRAŻENIE jest fałszywe; fałszywe\n"
+"    \t\t\tw innym przypadku\n"
+"      WYR1 && WYR2\tPrawdziwe, gdy zarówno WYR1 jak i WYR2 są prawdziwe;\n"
+"    \t\t\tfałszywe w innym przypadku\n"
+"      WYR1 || WYR2\tPrawdziwe, gdy WYR1 lub WYR2 jest prawdziwe;\n"
+"    \t\t\tfałszywe w innym przypadku\n"
+"    \n"
+"    W przypadku użycia operatorów `==' lub `!=' napis po prawej stronie\n"
+"    operatora jest traktowany jak wzorzec i wykonywane jest dopasowywanie "
+"do\n"
+"    wzorca. W przypadku użycia operatora `=~' łańcuch po prawej stronie\n"
+"    operatora jest dopasowywany jako wyrażenie regularne.\n"
+"    \n"
+"    Operatory && i || nie obliczają WYR2, jeśli obliczenie WYR1 wystarcza "
+"do\n"
+"    określenia wartości wyrażenia.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    0 lub 1 w zależności od wartości WYRAŻENIA."
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"Popularne zmienne powłoki i ich zastosowanie.\n"
+"    \n"
+"    BASH_VERSION\tInformacja o wersji tego Basha.\n"
+"    CDPATH\tRozdzielona dwukropkami lista katalogów do wyszukiwania\n"
+"    \t\tkatalogów podanych jako argumenty `cd'.\n"
+"    GLOBIGNORE\tRozdzielona dwukropkami lista wzorców nazw plików\n"
+"    \t\tdo ignorowania przy rozwijaniu ścieżek.\n"
+"    HISTFILE\tNazwa pliku, w którym zapisywana jest historia poleceń.\n"
+"    HISTFILESIZE\tMaksymalna liczba linii w tym pliku.\n"
+"    HISTSIZE\tMaksymalna liczba linii historii, do której ma dostęp\n"
+"    \t\tdziałająca powłoka.\n"
+"    HOME\tPełna ścieżka do katalogu logowania.\n"
+"    HOSTNAME\tNazwa bieżącego hosta.\n"
+"    HOSTTYPE\tRodzaj procesora, na jakim działa ta wersja Basha.\n"
+"    IGNOREEOF\tSterowanie akcją powłoki w przypadku odebrania znaku\n"
+"    \t\tEOF jako jedynego wejścia. Jeśli zmienna jest ustawiona,\n"
+"    \t\tjej wartością jest liczba znaków EOF, które mogą wystąpić\n"
+"    \t\tw pustym wierszu przed zakończeniem powłoki (domyślnie 10).\n"
+"    \t\tJeśli nie jest ustawiona, EOF oznacza koniec wejścia.\n"
+"    MACHTYPE\t�ańcuch opisujący bieżący system, na jakim działa Bash.\n"
+"    MAILCHECK\tOkreślenie jak często (w sekundach) Bash ma sprawdzać\n"
+"    \t\tobecność nowej poczty.\n"
+"    MAILPATH\tRozdzielona dwukropkami lista nazw plików, w których\n"
+"    \t\tBash ma sprawdzać obecność nowej poczty.\n"
+"    OSTYPE\tWersja Uniksa, na której działa ta wersja Basha.\n"
+"    PATH\tRozdzielona dwukropkami lista katalogów do przeszukiwania\n"
+"    \t\tprzy wyszukiwaniu poleceń.\n"
+"    PROMPT_COMMAND\tPolecenie do wykonania przed wypisaniem każdego\n"
+"    \t\tgłównego napisu zachęty.\n"
+"    PS1\t\tGłówny napis zachęty.\n"
+"    PS2\t\tDrugorzędny napis zachęty.\n"
+"    PWD\t\tPełna ścieżka do bieżącego katalogu.\n"
+"    SHELLOPTS\tRozdzielona dwukropkami lista włączonych opcji powłoki.\n"
+"    TERM\tNazwa typu bieżącego terminala.\n"
+"    TIMEFORMAT\tFormat wyjściowy do statystyk czasu wyświetlanych przez\n"
+"    \t\tpolecenie wbudowane `time'.\n"
+"    auto_resume\tWartość niepusta oznacza, że słowo polecenia występujące\n"
+"    \t\tw linii jako jedyne jest najpierw wyszukiwane na liście aktualnie\n"
+"    \t\tzatrzymanych zadań. Jeśli tam zostanie znalezione, to zadanie\n"
+"    \t\tjest wznawiane jako pierwszoplanowe. Wartość `exact' oznacza, że\n"
+"    \t\tsłowo polecenia musi dokładnie pasować do polecenia na liście\n"
+"    \t\tzadań zatrzymanych. Wartość `substring' oznacza, że słowo\n"
+"    \t\tpolecenia musi pasować do podciągu zadania. Każda inna wartość\n"
+"    \t\toznacza, że polecenie musi być przedrostkiem zatrzymanego\n"
+"    \t\tzadania.\n"
+"    histchars\tZnaki sterujÄ…ce rozwijaniem wg historii i szybkim\n"
+"    \t\tpodstawianiem. Pierwszy znak jest znakiem podstawiania\n"
+"    \t\thistorii, zwykle `!'. Drugi jest znakiem \"szybkiego podstawienia"
+"\",\n"
+"    \t\tzwykle `^'. Trzeci znak jest znakiem \"komentarza historii\",\n"
+"    \t\tzwykle `#'.\n"
+"    HISTIGNORE\tRozdzielona dwukropkami lista wzorców używanych przy\n"
+"    \t\tdecydowaniu, które polecenia powinny być zapisywane na liście\n"
+"    \t\thistorii.\n"
+
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Dodanie katalogów do stosu.\n"
+"    \n"
+"    Dodanie katalogu na wierzchołku stosu katalogów lub rotacja stosu\n"
+"    czyniąca jego nowym wierzchołkiem bieżący katalog roboczy. Wywołane bez\n"
+"    argumentów zamienia na stosie dwa najwyższe katalogi.\n"
+"    \n"
+"    Opcje:\n"
+"      -n\tPominięcie zmiany katalogu podczas umieszczania katalogów na\n"
+"    \t\tstosie tak, że zmieniany jest tylko stos.\n"
+"    \n"
+"    Argumenty:\n"
+"      +N\tRotacja stosu czyniąca jego wierzchołkiem N-ty katalog (licząc\n"
+"    \t\tod lewej strony listy wypisywanej przez `dirs', poczÄ…wszy od zera).\n"
+"    \n"
+"      -N\tRotacja stosu czyniąca jego wierzchołkiem N-ty katalog (licząc\n"
+"    \t\tod prawej strony listy wypisywanej przez `dirs', poczÄ…wszy od "
+"zera).\n"
+"    \n"
+"      KATALOG\tUmieszczenie KATALOGU na wierzchołku stosu i uczynienie go\n"
+"    \t\tnowym bieżącym katalogiem roboczym.\n"
+"    \n"
+"    Zawartość stosu katalogów można zobaczyć za pomocą polecenia `dirs'.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, chyba że podano błędny argument lub zmiana "
+"katalogu\n"
+"    siÄ™ nie powiedzie."
+
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Usunięcie katalogów ze stosu.\n"
+"    \n"
+"    Usunięcie pozycji ze stosu katalogów. Wywołane bez argumentów usuwa\n"
+"    katalog z wierzchołka stosu i zmienia katalog bieżący na katalog\n"
+"    będący nowym wierzchołkiem stosu.\n"
+"    \n"
+"    Opcje:\n"
+"      -n\tPominięcie zmiany katalogu podczas usuwania katalogów ze stosu\n"
+"    \t\ttak, że zmieniany jest tylko stos.\n"
+"    \n"
+"    Argumenty:\n"
+"      +N\tUsunięcie ze stosu N-tej pozycji licząc od lewej strony listy\n"
+"    \t\twypisywanej przez `dirs', począwszy od zera. Na przykład: `popd +0'\n"
+"    \t\tusuwa pierwszy katalog, `popd +1' usuwa drugi.\n"
+"    \n"
+"      -N\tUsunięcie ze stosu N-tej pozycji licząc od prawej strony listy\n"
+"    \t\twypisywanej przez `dirs', począwszy od zera. Na przykład: `popd -0'\n"
+"    \t\tusuwa pierwszy katalog, `popd -1' usuwa drugi.\n"
+"    \n"
+"    Zawartość stosu katalogów można zobaczyć za pomocą polecenia `dirs'.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, chyba że podano błędny argument lub zmiana "
+"katalogu\n"
+"    siÄ™ nie powiedzie."
+
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Wypisanie stosu katalogów.\n"
+"    \n"
+"    Wypisanie listy aktualnie pamiętanych katalogów. Katalogi umieszczane "
+"sÄ…\n"
+"    na liście za pomocą polecenia `pushd'; można cofać się w obrębie listy\n"
+"    za pomocÄ… polecenia `popd'.\n"
+"    \n"
+"    Opcje:\n"
+"      -c\twyczyszczenie stosu katalogów poprzez usunięcie wszystkich jego\n"
+"    \t\telementów\n"
+"      -l\tnieużywanie wersji skróconej wersji z tyldą przy wypisywaniu\n"
+"    \t\tkatalogów względem katalogu domowego\n"
+"      -p\twypisanie katalogów ze stosu w osobnych wierszach\n"
+"      -v\twypisanie katalogów ze stosu w osobnych wierszach, poprzedzając\n"
+"    \t\tkażdy jego pozycją na stosie\n"
+"    \n"
+"    Argumenty:\n"
+"      +N\tWypisanie N-tej pozycji liczÄ…c od lewej strony listy wypisywanej\n"
+"    \t\tprzez dirs wywołane bez opcji, począwszy od zera.\n"
+"    \n"
+"      -N\tWypisanie N-tej pozycji liczÄ…c od prawej strony listy wypisywanej\n"
+"    \t\tprzez dirs wywołane bez opcji, począwszy od zera.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, chyba że podano błędną opcję lub wystąpi błąd."
+
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"Ustawianie i anulowanie opcji powłoki.\n"
+"    \n"
+"    Zmiana ustawienia każdej z NAZWY-OPCJI. Bez argumentów będących "
+"opcjami,\n"
+"    wypisywane sÄ… wszystkie podane NAZWY-OPCJI, lub wszystkie opcje "
+"powłoki,\n"
+"    jeśli nie podano NAZW-OPCJI, wraz z zaznaczeniem włączonych.\n"
+"    \n"
+"    Opcje:\n"
+"      -o\tograniczenie NAZW-OPCJI do używanych z `set -o'\n"
+"      -p\twypisanie opcji powłoki z określeniem stanu\n"
+"      -q\tpominięcie wyjścia\n"
+"      -s\twłączenie (ustawienie) każdej NAZWY-OPCJI\n"
+"      -u\twyłączenie (anulowanie) każdej NAZWY-OPCJI\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda jeśli NAZWA-OPCJI jest włączona; niepowodzenie, "
+"jeśli\n"
+"    podano błędną opcję lub NAZWA-OPCJI jest wyłączona."
+
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"Formatowanie i wypisanie ARGUMENTÓW zgodnie z FORMATEM.\n"
+"    \n"
+"    Opcje:\n"
+"      -v ZMIENNA\tprzypisanie wyjścia do podanej ZMIENNEJ powłoki zamiast\n"
+"    \t\twypisywania na standardowym wyjściu\n"
+"    \n"
+"    FORMAT jest łańcuchem znakowym zawierającym trzy rodzaje obiektów:\n"
+"    zwykłe znaki, które są kopiowane na standardowe wyjście; znaki "
+"sekwencji\n"
+"    sterujących, które są przekształcane i kopiowane na standardowe "
+"wyjście;\n"
+"    oraz sekwencje formatujące, z których każda powoduje wypisanie "
+"kolejnego\n"
+"    argumentu.\n"
+"    \n"
+"    Poza standardowymi sekwencjami formatujÄ…cymi opisanymi w printf(1) oraz\n"
+"    printf(3), printf interpretuje:\n"
+"    \n"
+"      %b\trozwinięcie sekwencji z odwrotnym ukośnikiem w odpowiadającym\n"
+"    \t\targumencie\n"
+"      %q\tcytowanie argumentu w sposób umożliwiający użycie na wejściu\n"
+"    \t\tpowłoki\n"
+"      %(fmt)T\twypisanie łańcucha daty-czasu otrzymanego z użycia FMT jako\n"
+"    \t        łańcucha formatującego dla strftime(3)\n"
+"    \n"
+"    Format jest używany ponownie w razie potrzeby w celu pochłonięcia\n"
+"    wszystkich argumentów. Jeśli argumentów jest mniej, niż wymaga format,\n"
+"    nadmiarowe sekwencje zachowują się tak, jakby podano wartość zerową lub\n"
+"    łańcuch pusty.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, chyba że podano błędną opcję lub zapis albo\n"
+"    przypisanie zakończy się niepowodzeniem."
+
+#: builtins.c:1971
+#, fuzzy
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Określenie sposobu dopełniania argumentów przez Readline.\n"
+"    \n"
+"    Określenie dla każdej NAZWY sposobu dopełniania argumentów. Jeśli nie\n"
+"    podano opcji, wypisywane są istniejące specyfikacje dopełniania w "
+"sposób\n"
+"    pozwalający na ich ponowne użycie jako wejście.\n"
+"    \n"
+"    Opcje:\n"
+"      -p\twypisanie istniejących dopełnień w formacie do ponownego użycia\n"
+"      -r\tusunięcie specyfikacji dopełniania dla każdej NAZWY lub, jeśli\n"
+"    \t\tnie podano NAZW, wszystkich specyfikacji dopełniania\n"
+"      -D\tstosowanie dopełniania i akcji domyślnie dla poleceń bez\n"
+"    \t\tokreślonych żadnych konkretnych reguł dopełniania\n"
+"      -E\tstosowanie dopełniania i akcji dla \"pustych\" poleceń -\n"
+"    \t\tpróby dopełnienia w pustej linii\n"
+"      -I\tstosowanie dopełniania i akcji do początkowego słowa (zwykle\n"
+"    \t\tpolecenia)\n"
+"    \n"
+"    Przy próbie dopełnienia akcje są wykonywane w kolejności takiej, jak\n"
+"    wielkie litery wymienione powyżej. Jeśli podano wiele opcji, opcja -D\n"
+"    ma priorytet nad -E, a obie majÄ… priorytet nad -I.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, chyba że podano błędną opcję lub wystąpi błąd."
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Wypisanie możliwych uzupełnień w zależności od opcji.\n"
+"    \n"
+"    Przeznaczone do wykorzystania w funkcjach powłoki generujących możliwe\n"
+"    uzupełnienia. Gdy podany jest opcjonalny argument S�OWO, generowane są\n"
+"    uzupełnienia pasujące do S�OWA.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, chyba że podano błędną opcję lub wystąpi błąd."
+
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"Zmiana lub wyświetlenie opcji dopełniania.\n"
+"    \n"
+"    Zmiana opcji dopełniania dla każdej NAZWY lub, jeśli nie podano NAZW,\n"
+"    aktualnie wykonywanego dopełniania. Jeśli nie podano OPCJI, wypisanie\n"
+"    opcji dopełniania dla każdej NAZWY lub bieżącej specyfikacji "
+"dopełniania.\n"
+"    \n"
+"    Opcje:\n"
+"    \t-o opcja\tUstawienie podanej OPCJI dopełniania dla każdej NAZWY\n"
+"    \t-D\t\tZmiana opcji dla \"domyślnego\" dopełniania polecenia\n"
+"    \t-E\t\tZmiana opcji dla dopełniania \"pustego\" polecenia\n"
+"    \t-I\t\tZmiana opcji dla dopełniania dla początkowego słowa\n"
+"    \n"
+"    Użycie `+o' zamiast `-o' wyłącza podaną opcję.\n"
+"    \n"
+"    Argumenty:\n"
+"    \n"
+"    Każda NAZWA odnosi się do polecenia, dla którego specyfikacja "
+"dopełniania\n"
+"    musi być wcześniej zdefiniowana przy użyciu polecenia wbudowanego\n"
+"    `complete'. Jeśli nie podano NAZW, compopt musi być wywołane z funkcji\n"
+"    aktualnie generującej dopełnienia, wtedy zmieniane są opcje dla "
+"aktualnie\n"
+"    wykonywanego generatora dopełnień.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, chyba że podano błędną opcję lub NAZWA nie ma\n"
+"    zdefiniowanej specyfikacji dopełniania."
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"Odczyt linii ze standardowego wejścia do zmiennej tablicowej indeksowanej.\n"
+"    \n"
+"    Odczyt linii ze standardowego wejścia (lub deskryptora FD, jeśli podano\n"
+"    opcjÄ™ -u) do zmiennej tablicowej indeksowanej TABLICA. Zmienna MAPFILE\n"
+"    jest domyślną TABLICĄ.\n"
+"    \n"
+"    Opcje:\n"
+"      -d ogr\tUżycie OGRanicznika do kończenia linii zamiast znaku nowej "
+"linii\n"
+"      -n liczba\tSkopiowanie maksymalnie podanej LICZBY linii. Jeśli LICZBA\n"
+"    \t\t\twynosi 0, kopiowane sÄ… wszystkie linie.\n"
+"      -O początek\tRozpoczęcie wpisywania do TABLICY od indeksu POCZĄTKU.\n"
+"    \t\t\tDomyślny indeks wynosi 0.\n"
+"      -s liczba\tPominięcie pierwszych LICZBA odczytanych linii.\n"
+"      -t\tUsunięcie końcowego znaku końca linii z każdej wczytanej linii.\n"
+"      -u fd\tOdczyt linii z deskryptora FD zamiast standardowego wejścia.\n"
+"      -C wywołanie\tObliczenie WYWO�ANIA po odczycie każdego CO-ILE linii.\n"
+"      -c co-ile\tLiczba linii do wczytania między każdym WYWO�ANIEM.\n"
+"    \n"
+"    Argumenty:\n"
+"      TABLICA\tNazwa zmiennej tablicowej do użycia na dane z pliku.\n"
+"    \n"
+"    Jeśli podano -C bez -c, domyślnym krokiem jest 5000. Podczas obliczania\n"
+"    WYWO�ANIA jest przekazywany indeks do następnego elementu tablicy, "
+"który\n"
+"    ma być przypisany oraz - jako kolejne argumenty - linia do przypisania.\n"
+"    \n"
+"    Jeśli nie podano jawnie początku, mapfile czyści TABLICĘ przed\n"
+"    przypisywaniem.\n"
+"    \n"
+"    Stan wyjściowy:\n"
+"    Zwracana jest prawda, chyba że podano błędną opcję lub TABLICA jest "
+"tylko\n"
+"    do odczytu, lub nie jest tablicÄ… indeksowanÄ…."
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Odczyt linii z pliku do zmiennej tablicowej.\n"
+"    \n"
+"    Synonim polecenia `mapfile'."
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "Zwraca kontekst wywołania bieżącego podprogramu.\n"
+#~ "    \n"
+#~ "    Bez WYRAŻENIA zwraca "
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process: proces %5ld (%s) w potoku"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "Nieznany sygnał #"
diff --git a/po/pt.gmo b/po/pt.gmo
new file mode 100644
index 0000000..a66d7c7
--- /dev/null
+++ b/po/pt.gmo
diff --git a/po/pt.po b/po/pt.po
new file mode 100644
index 0000000..7868edb
--- /dev/null
+++ b/po/pt.po
@@ -0,0 +1,5990 @@
+# Bash - Bourne Again Shell.
+# Copyright (C) 2018 Free Software Foundation, Inc.
+# This file is distributed under the same license as the Bash package.
+# Pedro Albuquerque <palbuquerque73@gmail.com>, 2018, 2019.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: bash-5.0\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2019-01-09 07:09+0000\n"
+"Last-Translator: Pedro Albuquerque <palbuquerque73@gmail.com>\n"
+"Language-Team: Portuguese <translation-team-pt@lists.sourceforge.net>\n"
+"Language: pt\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=2; plural=n !=1;\n"
+"X-Generator: Gtranslator 2.91.7\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "subscrito de matriz inválido"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr "%s: a remover atributo nameref"
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: impossível converter matriz indexada para associativa"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: chave de matriz associativa inválida"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: impossível atribuir a índice não numérico"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr "%s: %s: tem de usar subscrito ao atribuir a matriz associativa"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: impossível criar: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr ""
+"bash_execute_unix_command: impossível encontrar mapa de teclado para o "
+"comando"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: o 1º carácter não-espaço não é \"\"\""
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "sem \"%c\" de fecho em %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: separador dois pontos em falta"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "\"%s\": impossível desassociar"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr "expansão: impossível alocar memória para %s"
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr "expansão: falha ao alocar memória para %u elementos"
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr "expansão: falha ao alocar memória para \"%s\""
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "\"%s\": aliás inválido"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "Edição de linha não activada"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "\"%s\": mapa de teclado inválido"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: impossível ler: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "\"%s\": nome de função desconhecido"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s: não tem associação a qualquer tecla.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s pode ser chamado via "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "\"%s\": impossível desassociar"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "total de ciclos"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "só tem significado num ciclo \"for\", \"while\" ou \"until\""
+
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Devolver o contexto da actual chamada a sub-rotina.\n"
+"     \n"
+"     Sem EXPR, devolve \"$linha $nomefich\".  Com EXPR, devolve\n"
+"     \"$linha $sub-rotina $nomefich\"; esta informação extra pode ser usada\n"
+"     para obter um rasto da pilha.\n"
+"     \n"
+"     O valor de EXPR indica quantas chamadas deve recuar antes da\n"
+"     actual; a chamada superior é a chamada 0.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve 0 a não ser que a consola não esteja a executar uma função ou "
+"EXPR\n"
+"     seja inválida."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "HOME não definida"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "demasiados argumentos"
+
+#: builtins/cd.def:342
+msgid "null directory"
+msgstr "pasta nula"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "OLDPWD não definida"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "linha %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "aviso: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: uso: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: a opção requer um argumento"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: requer um argumento numérico"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: não encontrado"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: opção inválida"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: nome de opção inválido"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "\"%s\": identificador inválido"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "número octal inválido"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "número hexadecimal inválido"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "número inválido"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: especificação de sinal inválida"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "\"%s\": especificação de pid ou tarefa inválida"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: variável só de leitura"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s fora do intervalo"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "argumento"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s fora do intervalo"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: tarefa inexistente"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: sem controlo da tarefa"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "sem controlo da tarefa"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: restrita"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "restrita"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: não é interno da consola"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "erro de escrita: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "erro ao definir atributos do terminal: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "erro ao obter atributos do terminal: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: erro ao obter a pasta actual: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: especificação de tarefa ambígua"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr "ajuda indisponível nesta versão"
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: impossível desactivar: %s só de leitura"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: impossível desactivar"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: nome de acção inválido"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: sem especificação de conclusão"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "aviso: a opção -F pode não resultar como esperado"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "aviso: a opção -C pode não resultar como esperado"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "a função de conclusão não está em execução"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "só pode ser usado numa função"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr "%s: variável de referência não pode ser uma matriz"
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr "%s: não são permitidas auto-referências de nameref"
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s: referência circular de nome"
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "\"%s\": nome de variável inválido para referência de nome"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "impossível usar \"-f\" para fazer funções"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: função só de leitura"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr "%s: atribuição de matriz composta citada obsoleta"
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: impossível destruir variáveis de matriz assim"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: impossível converter matriz associativa em indexada"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "carregamento dinâmico indisponível"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "impossível abrir objecto partilhado %s: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "impossível encontrar %s no objecto partilhado %s: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: não carregada dinamicamente"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr "carregamento da função %s devolve falha (%d): não carregada"
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: não carregada dinamicamente"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: impossível eliminar: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: é uma pasta"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: não é um ficheiro normal"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: ficheiro muito grande"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: impossível executar o binário"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: impossível executar: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "logout\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "não é consola de sessão: use \"exit\""
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Há tarefas interrompidas.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Há tarefas em curso.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "sem comando encontrado"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "especificação de histórico"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: impossível abrir ficheiro temporário: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "actual"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "tarefa %d começou sem controlo de tarefa"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: opção ilegal -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: a opção requer um argumento -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "hashing desactivado"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: tabela de hash vazia\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "sucessos\tcomando\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Comandos de consola correspondentes à palavra-chave \""
+msgstr[1] "Comandos de consola correspondentes a palavras-chave \""
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"nenhum tópico de ajuda para \"%s\".  Tente \"help help\", \"man -k %s\" ou "
+"\"info %s\"."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: impossível abrir: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Estes comandos de consola são definidos internamente. Insira \"help\" para "
+"ver a lista.\n"
+"Insira \"help nome\" para saber mais sobre a função \"nome\".\n"
+"Use \"info bash\" para saber mais sobre a consola em geral.\n"
+"Use \"man -k ou \"info\" para saber mais sobre comandos não listados.\n"
+"\n"
+"Um asterisco (*) junto a um nome significa que o comando está inactivo.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "impossível usar mais de um -anrw"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "posição do histórico"
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: datação inválida"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: falha na expansão do histórico"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: falha inlib"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "não são permitidas mais opções com \"-x\""
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: os argumentos têm de ser IDs de processos ou tarefas"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Erro desconhecido"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "esperada expressão"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: não é uma matriz indexada"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: especificação de descritor de ficheiro inválida"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: descritor de ficheiro inválido: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: total de linhas inválido"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: origem de matriz inválida"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: callback inválida"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "nome de variável de matriz vazio"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "requerido suporte a variáveis de matriz"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "%s: carácter de formato em falta"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "\"%c\": especificação de formato de hora inválida"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "\"%c\": carácter de formato inválido"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "aviso: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "problema de análise de formato: %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "dígito hex em falta para \\x"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "dígito unicode em falta para \\%c"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "nenhuma outra pasta"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s: argumento inválido"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<sem pasta actual>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "pilha de pastas vazia"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "índice da pilha de pastas"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Mostrar a lista de pastas actualmente lembradas.  As pastas\n"
+"    entram na lista com o comando \"pushd\"; pode recuar\n"
+"    na lista com o comando \"popd\".\n"
+"    \n"
+"    Opções:\n"
+"      -c\tlimpar a pilha de pastas eliminando todos os elementos\n"
+"      -l\tnão imprimir versões com prefixo til de pastas relativas\n"
+"    \tà sua pasta home\n"
+"      -p\timprimir a pilha de pastas com uma entrada por linha\n"
+"      -v\timprimir a pilha de pastas com uma entrada por linha com a sua\n"
+"    \tposição na pilha como prefixo\n"
+"    \n"
+"    Argumentos:\n"
+"      +N\tmostra a N entrada a contar da esquerda da lista mostrada por\n"
+"    \tpastas quando chamada sem opções, começando com zero.\n"
+"    \n"
+"      -N\tmostra a N entrada a contar da direita da lista mostrada por\n"
+"    \tpastas quando chamada sem opções, começando com zero."
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Adiciona uma pasta ao cimo da pilha de pastas ou roda a pilha\n"
+"    tornando a pasta actual o novo cimo da pilha.\n"
+"    Sem argumentos, troca as duas pastas superiores.\n"
+"    \n"
+"    Opções:\n"
+"      -n\tSuprime a troca normal de pastas ao adicionar\n"
+"    \tpastas à pilha, só a pilha é manipulada.\n"
+"    \n"
+"    Argumentos:\n"
+"      +N\tRoda a pilha de forma a que a N pasta (contando\n"
+"    \tda esquerda da lista mostrada por pastas, começando com\n"
+"    \tzero) fique no topo.\n"
+"    \n"
+"      -N\tRoda a pilha de forma a que a N pasta (contando\n"
+"    \tda direita da lista mostrada por pastas, começando com\n"
+"    \tzero) fique no topo.\n"
+"    \n"
+"      PST\tAdiciona PST ao cimo da pilha de pastas, tornando-a a\n"
+"    \tnova pasta de trabalho actual.\n"
+"    \n"
+"    O \"dirs\" interno mostra a pilha de pastas."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Remove entradas da pilha de pastas.  Sem argumentos, remove\n"
+"    a pasta superior da pilha e muda para a nova pasta de topo.\n"
+"    \n"
+"    Opções:\n"
+"      -n\tSuprime a troca normal de pastas ao remover\n"
+"    \tpastas da pilha, só a pilha é manipulada.\n"
+"    \n"
+"    Argumentos:\n"
+"      +N\tRemove a N pasta contando da esquerda da lista\n"
+"    \tmostrada por pastas, começando com zero  Por exemplo: \"popd +0\"\n"
+"    \tremove a primeira pasta, \"popd +1\" a segunda.\n"
+"    \n"
+"      -N\tRemove a N pasta contando da direita da lista\n"
+"    \tmostrada por pastas, começando com zero  Por exemplo: \"popd +0\"\n"
+"    \tremove a última pasta, \"popd +1\" a penúltima.\n"
+"    \n"
+"    O \"dirs\" interno mostra a pilha de pastas."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: especificação de inacção inválida"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "erro de leitura: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr "só pode usar \"return\" a partir de uma função ou script baseado"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "impossível desactivar simultaneamente uma função e uma variável"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: não é variável de matriz"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: não é função"
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr "%s: impossível exportar"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "total de trocas"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "impossível definir e desactivar opções da consola em simultâneo"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: nome de opção da consola inválido"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "requerido argumento de nome de ficheiro"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: ficheiro não encontrado"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "impossível suspender"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "impossível suspender uma consola de sessão"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s usa o aliás \"%s\"\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s é palavra-chave da consola\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s é uma função\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s é opção interna especial da consola\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s é opção interna da consola\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s é %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s tem hash (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: argumento de limite inválido"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "\"%c\": comando errado"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: impossível obter limite: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "limite"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: impossível modificar limite: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "número octal"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "\"%c\": operador de modo simbólico inválido"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "\"%c\": carácter de modo simbólico inválido"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " linha "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "último comando: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "A abortar..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr "INFORM.: "
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "erro de comando desconhecido"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "tipo de comando errado"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "conector errado"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "salto errado"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: variável desassociada"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\aDemasiada inacção à espera de entrada: sessão terminada\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "impossível redireccionar entrada padrão de /dev/null: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "FORMATOHORA: \"%c\": carácter de formato inválido"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr "execute_coproc: coproc [%d:%s] ainda existe"
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "erro de pipe"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr "eval: nível máximo de aninhamento de eval excedido (%d)"
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr "%s: nível máximo de aninhamento de fonte excedido (%d)"
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr "%s: nível máximo de aninhamento de função excedido (%d)"
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: restrito: impossível especificar \"/\" em nomes de comando"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: comando não encontrado"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: interpretador errado"
+
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: impossível executar binário: %s"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "%s: é uma opção interna especial"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "impossível duplicar fd %d para fd %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "nível de recursão da expressão excedido"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "sub-fluxo da pilha de recursividade"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "erro de sintaxe na expressão"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "tentativa de atribuição a não-variável"
+
+#: expr.c:530
+msgid "syntax error in variable assignment"
+msgstr "erro de sintaxe na atribuição de variável"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "divisão por 0"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "problema: símbolo expassign errado"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "\":\" esperados para expressão condicional"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "expoente menor que 0"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "identificador esperado após pré-incremento ou pré-decremento"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "\")\" em falta"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "erro de sintaxe: operando esperado"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "erro de sintaxe: operador aritmético inválido"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (símbolo de erro é \"%s\")"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "base aritmética inválida"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: total de linhas inválido"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "valor muito grande para a base"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: erro de expressão\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: impossível aceder a pastas-mãe"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "impossível repor modo nodelay para fd %d"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr ""
+"impossível alocar novo descritor de ficheiro para entrada bash de fd %d"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input: buffer já existe para o novo fd %d"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: pipe pgrp"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "pid %d aparece em tarefa em execução %d"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "a eliminar tarefa interrompida %d com grupo de processo %ld"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process: pid %5ld (%s) marcado como ainda activo"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: pid não existente"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Sinal %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Feito"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Interrompido"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Interrompido(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "Em execução"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Feito(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Sair de %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Estado desconhecido"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(núcleo despejado) "
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (wd: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "setpgid filho (%ld para %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: pid %ld não é um filho desta consola"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: sem registo do processo %ld"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_tarefa: tarefa %d está interrompida"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: tarefa inexistente"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: tarefa terminada"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: tarefa %d já em 2º plano"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr "waitchld: a ligar WNOHANG para evitar bloquieo indefinido"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: linha %d: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (núcleo despejado)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(wd agora: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: getpgrp falhou"
+
+#: jobs.c:4447
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: sem controlo de tarefa em 2º plano"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: disciplina de linha"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "impossível definir grupo de processo do terminal (%d)"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "não há controlo de tarefa nesta consola"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: asserção falhada: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d: asserção frustrada\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "desconhecido"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: bloqueio na lista livre clobbered"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: chamado com argumento de bloco já liberto"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: chamado com argumento de bloco não alocado"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: sub-fluxo detectado; mh_nbytes fora do intervalo"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: sub-fluxo detectado; mh_nbytes fora do intervalo"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: tamanho dos pontos inicial e final difere"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: chamado com argumento de bloco não alocado"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc: sub-fluxo detectado; mh_nbytes fora do intervalo"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc: sub-fluxo detectado; mh_nbytes fora do intervalo"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: tamanho dos pontos inicial e final difere"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: tabela de alocação cheia com FIND_ALLOC?\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: %p já na tabela como alocado?\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: %p já na tabela como livre?\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "base inválida"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: anfitrião desconhecido"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: serviço inválido"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: especificação de caminho de rede errada"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "operações de rede não suportadas"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: não pode alterar o idioma (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: não pode alterar o idioma (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: não pode alterar o idioma (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: não pode alterar o idioma (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "Tem correio em $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "Tem novo correio em $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "O correio em %s já foi lido\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "erro de sintaxe: requerida expressão aritmética"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "erro de sintaxe: \";\" inesperado"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "erro de sintaxe: \"((%s))\""
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: tipo de instrução %d errado"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr ""
+"here-document na linha %d delimitado por fim-de-ficheiro (desejado \"%s\")"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr ""
+"make_redirection: instrução de redireccionamento \"%d\" fora do intervalo"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+"consola_getc: consola_input_line_size (%zu) excede SIZE_MAX (%lu): linha "
+"truncada"
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr "total here-document máximo excedido"
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "EOF inesperado ao procurar \"%c\" correspondentes"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "EOF inesperado ao procurar \"]]\""
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "erro de sintaxe em expressão condicional: símbolo inesperado \"%s\""
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "erro de sintaxe em expressão condicional"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "símbolo inesperado \"%s\", esperado \")\""
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "esperado \")\""
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "argumento \"%s\" inesperado para operador unário condicional"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "argumento inesperado para operador unário condicional"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "símbolo \"%s\" inesperado, esperado operador binário condicional"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "esperado operador binário condicional"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "argumento \"%s\" inesperado para operador binário condicional"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "argumento inesperado para operador binário condicional"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "símbolo \"%c\" inesperado em comando condicional"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "símbolo \"%s\" inesperado em comando condicional"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "símbolo %d inesperado em comando condicional"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "erro de sintaxe junto a símbolo \"%s\" inesperado"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "erro de sintaxe junto a \"%s\""
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "erro de sintaxe: fim de ficheiro inesperado"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "erro de sintaxe"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Use \"%s\" para sair da consola.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "EOF inesperado ao procurar o \")\" correspondente"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "completion: função \"%s\" não encontrada"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr "programmable_completion: %s: possível ciclo de repetição"
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: NULL COMPSPEC"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: conector \"%d\" errado"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: descritor de ficheiro inválido"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: ponteiro de ficheiro NULL"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != fileno xtrace fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: \"%c\": carácter de formato inválido"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "descritor de ficheiro fora de alcance"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: redireccionamento ambíguo"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: impossível sobrescrever ficheiro existente"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: restricto: impossível redireccionar saída"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "impossível criar ficheiro temporário para here-document: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: impossível atribuir fd a variável"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "/dev/(tcp|udp)/host/port não suportado em trabalho de rede"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "erro de redireccionamento: impossível duplicar fd"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "impossível encontrar /tmp, por favor crie-a!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp tem de ser um nome de pasta válido"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr "modo pretty-printing ignorado em consolas interactivas"
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: opção inválida"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "impossível definir uid como %d: uid efectiva %d"
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "impossível definir gid como %d: gid efectiva %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr "impossível iniciar o depurador; modo de depuração desactivado"
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr "%s: é uma pasta"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "Não tenho nome!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, versão %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Uso:\t%s [opção longa GNU] [opção] ...\n"
+"\t%s [opção longa GNU] [opção] script-file ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "Opções longas GNU:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Opções da consola:\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\tcomando -ilrsD ou -c ou -O shopt_option\t\t(só chamada)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\topção -%s ou -o\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+"Insira \"%s -c \"help set\"\" para mais informação sobre opções da consola.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr ""
+"Insira \"%s -c help\" para mais informação sobre comandos internos da "
+"consola.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "Use o comando \"bashbug\" para reportar erros.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr "Página inicial do bash: <http://www.gnu.org/software/bash>\n"
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr "Ajuda geral para usar programas GNU: <http://www.gnu.org/gethelp/>\n"
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: operação inválida"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Sinal falso"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Desligar"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Interromper"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Sair"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Instrução ilegal"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "BPT trace/trap"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "Instrução ABORT"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "Instrução EMT"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Excepção de vírgula flutuante"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Morto"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Erro de bus"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Falha de segmentação"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Chamada de sistema errada"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Pipe quebrado"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Alarme"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Terminado"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Condição IO urgente"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Parado (sinal)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Continuar"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Morte ou paragem do filho"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Parado (entrada tty)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Parado (saída tty)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "I/O pronto"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "Limite do CPU"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "Limite do ficheiro"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Alarme (virtual)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Alarme (perfil)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Janela alterada"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Bloqueio de registo"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Sinal de utilizador 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Sinal de utilizador 2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "entrada de dados HTF pendente"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "falha de energia iminente"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "acidente do sistema iminente"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "migrar processo para outro CPU"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "erro de programação"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "concedido modo de monitor HTF"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "retirado modo de monitor HTF"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "sequência de som HTF terminou"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "Pedido de informação"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "Sinal desconhecido #%d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "má substituição: sem \"%s\" de fecho em %s"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: impossível atribuir lista a membro de matriz"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "impossível fazer pipe para substituição de processo"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "impossível fazer filho para substituição de processo"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "impossível abrir pipe chamado %s para leitura"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "impossível abrir pipe chamado %s para escrita"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "imossível duplicar pipe chamado %s como fd %d"
+
+#: subst.c:6213
+msgid "command substitution: ignored null byte in input"
+msgstr "substituição de comando: byte nulo ignorado na entrada"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "impossível fazer pipe para substituição de comando"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "impossível fazer filho para substituição de comando"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute: impossível duplicar pipe como fd 1"
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: nome de variável inválido para referência de nome"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: expansão indirecta inválida"
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr "%s: nome de variável inválido"
+
+#: subst.c:7256
+#, c-format
+msgid "%s: parameter not set"
+msgstr "%s: parâmetro não definido"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: parâmetro nulo ou não definido"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: expressão de sub-cadeia < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: má substituição"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: impossível atribuir desta forma"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+"futuras versões da consola vão forçar a avaliação como uma substituição "
+"aritmética"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "má substituição: sem \"\"\" de fecho em %s"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "sem par:%s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "argumento esperado"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: expressão inteira esperada"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "\")\" esperado"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "\")\" esperado, encontrado %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: operador bináro esperado"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: operador unáro esperado"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "\"]\" em falta"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "erro de sintaxe: \";\" inesperado"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "número de sinal inválido"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr "gestor de trap: nível máximo de gestor de captura excedido (%d)"
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: valor errado em trap_list[%d]: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps: gestor de sinal é SIG_DFL, a reenviar %d (%s) para mim "
+"próprio"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: sinal errado %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "erro ao importar definição de função para \"%s\""
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "nível da consola (%d) muito alto, a repor para 1"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variável: sem contexto de função no âmbito actual"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: não pode atribuir um valor à variável"
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr "%s: a atribuir inteiro à referência de nome"
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: sem contexto de função no âmbito actual"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s tem exportstr nulo"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "carácter %d inválido em exportstr para %s"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "sem \"=\" em exportstr para %s"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr "pop_var_context: cabeça de consola_variables não é contexto de função"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: sem contexto de global_variables"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr ""
+"pop_scope: cabeça de consola_variables não é âmbito de ambiente temporário"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: impossível abrir como FICHEIRO"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: valor inválido para descritor de ficheiro trace"
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s: valor de compatibilidade fora do intervalo"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Copyright (C) 2018 Free Software Foundation, Inc."
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"Licença GPLv3+: GNU GPL versão 3 ou posterior <http://gnu.org/licenses/gpl."
+"html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, versão %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr "Este é um programa gratuito; pode alterá-lo e distribuí-lo à vontade."
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "Não há QUALQUER GARANTIA, até aos limites previstos pela Lei."
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: impossível alocar %lu bytes (%lu bytes alocados)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: impossível alocar %lu bytes"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: impossível alocar %lu bytes (%lu bytes alocados)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: impossível alocar %lu bytes"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [nome[=valor] ... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] nome [nome ...]"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpsvPSVX] [-m mapa de teclado] [-f ficheiro] [-q nome] [-u nome] [-r "
+"seqtecl] [-x seqtecl:comando-consola] [seqtecl:função-readline ou comando-"
+"readline]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [consola-interno [arg ...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [expr]"
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]] [-@]] [pst]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "comando [-pVv] comando [arg ...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilnrtux] [-p] [nome[=valor] ...]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilnrtux] [-p] nome[=valor] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [opção] nome[=valor] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [arg ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [arg ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f ficheiro] [nome ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [arg ...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts optstring name [arg]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr ""
+"exec [-cl] [-a nome] [comando [argumentos ...]] [redireccionamento ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr "fc [-e ename] [-lnr] [primeiro] [último] ou fc -s [pat=rep] [comando]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [job_spec]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [job_spec ...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p caminho] [-dt] [nome ...]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [padrão ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d desvio] [n], history -anrw [ficheiro] ou history -ps arg "
+"[arg...]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "tarefas [-lnprs] [tarefaspec ...] ou tarefas -x comando [args]"
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [tarefaspec ... | pid ...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s sigspec | -n signum | -sigspec] pid | tarefaspec ... ou kill -l "
+"[sigspec]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let arg [arg ...]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a matriz] [-d delim] [-i texto] [-n ncars] [-N ncars] [-p "
+"prompt] [-t inacção] [-u fd] [nome ...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o nome-opção] [--] [arg ...]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [nome ...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [nome[=valor] ...] ou export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [nome[=valor] ...] ou readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source ficheiro [argumentos]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". ficheiro [argumentos]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [expr]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ arg... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[arg] signal_spec ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] nome [nome ...]"
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [limite]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [modo]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-fn] [id ...]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [pid ...]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for NOME [in PALAVRAS ... ] ; do COMANDOS; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( exp1; exp2; exp3 )); do COMANDOS; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select NOME [in PALAVRAS ... ;] do COMANDOS; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] pipeline"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case PALAVRA in [PADRÃO [| PADRÃO]...) COMANDOS ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if COMANDOS; then COMANDOS; [ elif COMANDOS; then COMANDOS; ]... [ else "
+"COMANDOS; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while COMANDOS; do COMANDOS; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until COMANDOS; do COMANDOS; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [NOME] comando [redireccionamentos]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "nome de função { COMANDOS ; } ou nome () { COMANDOS ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ COMANDOS ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "job_spec [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( expressão ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ expressão ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "variáveis - nomes e significados de algumas variáveis da consola"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | pasta]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [nomeopção ...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v var] formato [argumentos]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o opção] [-A acção] [-G "
+"padrãoglobal] [-W listapalavras]  [-F função] [-C comando] [-X filterpat] [-"
+"P prefixo] [-S sufixo] [nome ...]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o opção] [-A acção] [-G padrglob] [-W listpal]  [-"
+"F função] [-C comando] [-X padrfiltro] [-P prefixo] [-S sufixo] [palavra]"
+
+#: builtins.c:239
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o opção] [-DEI] [nome ...]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-d delim] [-n total] [-O origem] [-s total] [-t] [-u fd] [-C "
+"callback] [-c quantia] [matriz]"
+
+#: builtins.c:244
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-d delim] [-n total] [-O origem] [-s total] [-t] [-u fd] [-C "
+"callback] [-c quantum] [matriz]"
+
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Definir ou mostrar aliás.\n"
+"    \n"
+"    Sem argumentos, \"alias imprime a lista de aliás na forma\n"
+"    reutilizável \"alias NOME=VALOR\" na saída padrão.\n"
+"    \n"
+"    Com argumetos, é definido um aliás para cada NOME cujo VALOR é dado.\n"
+"    Um espaço final em VALOR causa uma verificação à palavra seguinte para\n"
+"    substituição do aliás quando o aliás for expandido.\n"
+"    \n"
+"    Opções:\n"
+"      -p\timprimir todos os aliás definidos em formato reutilizável\n"
+"    \n"
+"    Estado de saída:\n"
+"    alias devolve verdadeiro a não ser que seja fornecido um NOME para o "
+"qual\n"
+"ainda não haja um aliás."
+
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Remover cada NOME da lista de aliás definidos.\n"
+"    \n"
+"    Opções:\n"
+"      -a\tremove todas as definições de aliás\n"
+"    \n"
+"    Devolve sucesso a não ser que NOME seja um aliás inexistente."
+
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"Definir associações de teclas e variáveis para Readline.\n"
+"    \n"
+"    Associar uma sequência de teclas a uma função ou macro Readline, ou\n"
+"    defina uma variável Readline. A sintaxe de argumento não-opção é "
+"equivalente\n"
+"    à encontrada em ~/.inputrc, mas tem de ser passada como argumento "
+"único:\n"
+"     e.g., bind \"\"\\C-x\\C-r\": re-read-init-file\".\n"
+"     \n"
+"     Opções:\n"
+"        -m  maptecl            Use MAPTECL como mapa de teclado para a "
+"duração deste\n"
+"                                 comando. Nomes de mapas aceitáveis são "
+"emacs,\n"
+"                                 emacs-standard, emacs-meta, emacs-ctlx, vi, "
+"vi-move,\n"
+"                                 vi-command, e vi-insert.\n"
+"        -l                      Listar nomes de funções.\n"
+"        -P                      Listar nomes de funções e associações.\n"
+"        -p                      Listar funções funçãos e associações de "
+"forma a que possam\n"
+"                                 ser reutilizados como entrada.\n"
+"        -S                      Listar sequências de teclas que chamem "
+"macros e seus valores\n"
+"        -s                      Listar sequências de teclas que chamem "
+"macros e seus valores\n"
+"                                 de forma a que possam ser reutilizados como "
+"entrada.\n"
+"        -V                      Listar nomes de variáveis e seus valores\n"
+"        -v                      Listar nomes de variáveis e seus valores de "
+"forma a que possam\n"
+"                                 ser reutilizados como entrada.\n"
+"        -q  nome-função     Consultar que teclas chamaram a função em "
+"causa.\n"
+"        -u  nome-função     Unbind all keys which are bound to the named "
+"função.\n"
+"        -r  seqtecl          Remover associação de SEQTECL.\n"
+"        -f  nomefich         Ler associações de teclas a partir de "
+"NOMEFICH.\n"
+"        -x  seqtecl:comando-consola\tCausa a execuçaõ de COMANDO-SHELL "
+"quando\n"
+"     \t\t\t\tSEQTECL for inserido.\n"
+"        -X                      Listarsequências de teclas associadas a -x e "
+"comandos ligados\n"
+"                                 de forma a que possam ser reutilizados como "
+"entrada.\n"
+"     \n"
+"     Estado de saída:\n"
+"     bind devolve 0 a não ser que seja dada uma opção desconhecida ou ocorra "
+"um erro."
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Sair de ciclos for, while, ou until.\n"
+"     \n"
+"     Sai de um ciclo FOR, WHILE ou UNTIL.  Se N for especificado, quebrar N "
+"ciclos\n"
+"     envolventes.\n"
+"     \n"
+"     Estado de saída:\n"
+"     O estado de saída é 0 a não ser que N não seja maior ou igual que 1."
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Retomar ciclos for, while, ou until.\n"
+"     \n"
+"     Retoma a iteração seguinte do ciclo FOR, WHILE ou UNTIL envolvente.\n"
+"     Se N for especificado, retoma o N-ésimo ciclo envolvente.\n"
+"     \n"
+"     Estado de saída:\n"
+"     O estado de saída é 0 a não ser que N não seja maior ou igual que 1."
+
+#: builtins.c:354
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Executa comandos internos da consola.\n"
+"     \n"
+"     Executa SHELL-INTERNO com argumentos ARGs sem realizar procura do "
+"comando.\n"
+"     Útil quando deseja re-implementar um comando interno da consola como\n"
+"     função da consola, mas tem de executar o comando interno dentro da "
+"função.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve o estado de saída de SHELL-INTERNO ou falso se SHELL-INTERNO "
+"não\n"
+"     for um comando interno da consola."
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Devolver o contexto da actual chamada a sub-rotina.\n"
+"     \n"
+"     Sem EXPR, devolve \"$linha $nomefich\".  Com EXPR, devolve\n"
+"     \"$linha $sub-rotina $nomefich\"; esta informação extra pode ser usada\n"
+"     para obter um rasto da pilha.\n"
+"     \n"
+"     O valor de EXPR indica quantas chamadas deve recuar antes da\n"
+"     actual; a chamada superior é a chamada 0.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve 0 a não ser que a consola não esteja a executar uma função ou "
+"EXPR\n"
+"     seja inválida."
+
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"Alterar a pasta de trabalho da consola.\n"
+"     \n"
+"     Altera a pasta actual para PASTA. A PASTA predefinida é o valor da "
+"variável\n"
+"     HOME.\n"
+"     \n"
+"     A variável CDPATH define o caminho de procura para a pasta que contém\n"
+"     PASTA. Nomes de pasta alternativos em CDPATH são separados por \":"
+"\" (:).\n"
+"     Um nome de pasta nulo é equivalente à pasta actual. Se PASTA começar "
+"com\n"
+"     uma barra (/), CDPATH não é usada.\n"
+"     \n"
+"     Se a pasta não for encontrada e a opção de consola \"cdable_vars\" "
+"estiver definida,\n"
+"     a palavra é assumida como nome de variável. Se essa variável tiver um "
+"valor,\n"
+"     será usado como PASTA.\n"
+"     \n"
+"     Opções:\n"
+"        -L\tforçar seguimento de ligações simbólicas: resolve ligações\n"
+"     \t\tsimbólicas em PASTA após processar instâncias de \"..\"\n"
+"        -P\tusa a estrutura física de pastas sem seguir ligações\n"
+"     \t\tsimbólicas: resolve ligações simbólicas em PASTA antes de\n"
+"     \t\tprocessar instâncias de \"..\"\n"
+"        -e\tse a opção -P for usada e a pasta de trabalho actual não puder\n"
+"     \t\tser determinada com sucesso, sair com\n"
+"     \t\testado não-zero\n"
+"        -@\tem sistemas que o suportam, apresentar um ficheiro com "
+"atributos\n"
+"     \t\testendidos como uma pasta contendo os atributos do ficheiro.\n"
+"     \n"
+"     A predefinição é seguir ligações simbólicas, como se \"-L\" fosse "
+"especificada.\n"
+"     \"..\" é processado colocando o componente de caminho imediatamente "
+"anterior\n"
+"     como barra ou o começo de PASTA.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve 0 se a pasta for alterada e se $PWD for definida com sucesso "
+"quando\n"
+"     -P é usada; caso contrário, não-zero."
+
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"Imprimir o nome da actual pasta de trabalho.\n"
+"     \n"
+"     Opções:\n"
+"        -L\tImprimir o valor de $PWD se nomear a actual pasta de\n"
+"     \t\ttrabalho\n"
+"        -P\timprimir a pasta física, sem quaisquer ligações simbólicas\n"
+"     \n"
+"     Por predefinição, \"pwd\" comporta-se como se \"-L\" fosse "
+"especificada.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve 0 a não ser que seja indicada uma opçãoinválida ou a pasta "
+"actual\n"
+"     não possa ser lida."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Comando nulo.\n"
+"     \n"
+"     Sem efeito; o comando não faz nada.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Sempre com sucesso."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Devolve um resultado com sucesso.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Sempre com sucesso."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Devolve um resultado sem sucesso.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Falha sempre."
+
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Executar um comando simples ou mostrar informação sobre comandos.\n"
+"     \n"
+"     Executa COMANDO com ARGS suprimindo procura de funções da consola ou "
+"mostra\n"
+"     informação acerca dos COMANDOs especificados. Pode ser usado para "
+"chamar comandos\n"
+"     em disco quando existe uma função com o mesmo nome.\n"
+"     \n"
+"     Opções:\n"
+"        -p     usar valor predefinido para CAMINHO que garanta que se "
+"encontram\n"
+"                todos os utilitários padrão\n"
+"        -v     imprimir uma descrição de COMANDO similar ao interno \"type"
+"\"\n"
+"        -V     imprimir uma descrição mais detalhada de COMANDO\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve o estado de saída de COMANDO ou falha se COMANDO não for "
+"encontrado."
+
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"Define valores e atributos de variáveis.\n"
+"     \n"
+"     Declara variáveis e dá-lhes atributos. Se não indicar NOMEs,\n"
+"     mostrar os atributos e valores de todas as variáveis.\n"
+"     \n"
+"     Opções:\n"
+"        -f\trestringe acção ou exibição a nomes e definições de função\n"
+"        -F\trestringe exibição só a nomes de função (mais nº de linha e\n"
+"     \t\tficheiro fonte ao depurar)\n"
+"        -g\tcria variáveis globais quando usadas numa função da consola; "
+"senão\n"
+"     \t\té ignorada\n"
+"        -p\tmostra atributos e valores de cada NOME\n"
+"     \n"
+"     Opções que definem atributos:\n"
+"        -a\tpara tornar NOMEs matrizes indexadas (se suportado)\n"
+"        -A\tpara tornar NOMEs matrizes associativas (se suportado)\n"
+"        -i\tpara dar a NOMEs o atributo \"integer\"\n"
+"        -l\tpara converter NOMEs em minúsculas ao atribuir\n"
+"        -n\ttornar NOME uma referência à variável chamada pelo seu valor\n"
+"        -r\tpara tornar NOMEs só de leitura\n"
+"        -t\tpara dar a NOMEs o atributo \"trace\"\n"
+"        -u\tpara converter NOMEs em maiúsculas ao atribuir\n"
+"        -x\tpara tornar NOMEs exportáveis\n"
+"     \n"
+"     Usar \"+\" em vez de \"-\" desliga o atributo indicado.\n"
+"     \n"
+"     Variáveis com o atributo integer têm avaliação aritmética (veja o\n"
+"     comando \"let\") realizada quando lhe é atribuído um valor.\n"
+"     \n"
+"     Quando usado numa função, \"declare\" torna NOMEs locais, como o "
+"comando\n"
+"     \"local\". A opção \"-g\" suprime este comportamento.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve sucesso a não ser que seja indicada uma opção inválida ou "
+"ocorra um\n"
+"     erro de atribuição da variável."
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"Define variáveis e atributos.\n"
+"     \n"
+"     Um sinónimo para \"declare\".  Veja \"help declare\"."
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Define variáveis locais.\n"
+"     \n"
+"     Cria uma variável local chamada NOME e dá-lhe VALOR. OPÇÃO pode\n"
+"     ser qualquer opção aceite por \"declare\".\n"
+"     \n"
+"     Variáveis locais só podem ser usadas dentro de uma função; só são "
+"visíveis\n"
+"     para a função onde foram definidas e para os seus filhos.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve sucesso a não ser que uma opção inválida seja fornecida, "
+"ocorra \n"
+"     um erro de atribuição ou a consola não esteja a executar uma função."
+
+#: builtins.c:557
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Escreve argumentos para a saída padrão.\n"
+"     \n"
+"     Mostrar ARGs, separados por espaço único e seguidos de nova linha (LF)\n"
+"     na saída padrão.\n"
+"     \n"
+"     Opções:\n"
+"        -n\tnaõ acrescentar nova linha\n"
+"        -e\tpermitir interpretação dos escapes seguintes com barra esquerda\n"
+"        -E\tsuprimir explicitamente interpretação de escapes com barra "
+"esquerda\n"
+"     \n"
+"     \"echo\" interpreta os seguintes caracteres de escapes com barra "
+"esquerda:\n"
+"        \\a\talerta (bell)\n"
+"        \\b\tbackspace\n"
+"        \\c\tsuprimir mais saídas\n"
+"        \\e\tcarácter de escape\n"
+"        \\E\tcarácter de escape\n"
+"        \\f\tform feed\n"
+"        \\n\tnova linha (LF)\n"
+"        \\r\tcarriage return (CR)\n"
+"        \\t\ttabulação horizontal\n"
+"        \\v\ttabulação vertical\n"
+"        \\\\\tbarra esquerda (\"\\\")\n"
+"        \\0nnn\to carácter cujo código ASCII é NNN (octal).  NNN pode ter\n"
+"     \t\tde 0 a 3 dígitos octais\n"
+"        \\xHH\to carácter de 8-bit cujo valor é HH (hexadecimal).  HH\n"
+"     \t\tpode ter um ou dois dígitos hexadecimais\n"
+"        \\uHHHH\to carácter Unicode cujo valor é o valor hexadecimal HHHH.\n"
+"    \t\tHHHH pode ser de um a quatro dígitos hexadecimais.\n"
+"        \\UHHHHHHHH o carácter Unicode cujo valor é o valor hexadecimal\n"
+"    \t\tHHHHHHHH. HHHHHHHH pode ser de um a oito dígitos hexadecimais.\n"
+"    \n"
+"     Estado de saída:\n"
+"     Devolve sucesso a não ser que ocorra um erro de escrita."
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Escreve argumentos para a saída padrão.\n"
+"     \n"
+"     Mostrar ARGs na saída padrão seguidos de nova linha (LF).\n"
+"     \n"
+"     Opções:\n"
+"        -n\tnão acrescentar nova linha\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve sucesso a não ser que ocorra um erro de escrita."
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"Activar e desactivar internos da consola.\n"
+"     \n"
+"     Activa e desactiva comandos internos da consola. Desativar permite\n"
+"     executar um comando de disco com o mesmo nome que comando interno\n"
+"     sem ter de usar um caminho completo.\n"
+"     \n"
+"     Opções:\n"
+"        -a\timprimir lista de internos mostrando se estão ou não activos\n"
+"        -n\tdesactivar cada NOME ou mostrar uma lista de internos "
+"desactivados\n"
+"        -p\timprimir a lista de internos em formato reutilizável\n"
+"        -s\timprimir só os nomes de internos \"especiais\" Posix\n"
+"     \n"
+"     Opções que controlam o carregamento dinâmico:\n"
+"        -f\tCarregar interno NOME de objecto partilhado NOMEFICH\n"
+"        -d\tRemover um interno carregado com -f\n"
+"     \n"
+"     Sem opções, cada NOME é activado.\n"
+"     \n"
+"     Para usar o \"test\" encontado em $PATH em vez do interno da consola\n"
+"     insira \"enable -n test\".\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve sucesso a não ser que NOME não seja um interno da consola ou "
+"ocorra um erro."
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Executa argumentos como comando da consola.\n"
+"     \n"
+"     Combina ARGs numa única cadeia, usa o resultado como entrada da "
+"consola,\n"
+"     e executa os comandos resultantes.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve estado de saída do comando ou sucesso se o comando for nulo."
+
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"Analisa argumentos da opção.\n"
+"     \n"
+"     Getopts é usado pelos procedimentos da consola para analisar parâmetros "
+"posicionais\n"
+"     como opções.\n"
+"     \n"
+"     CADEIAOPÇÕES contém as letras de opção a reconhecer; se uma letra\n"
+"     for seguida de \":\", espera-se que a opção tenha um argumento,\n"
+"     separado da opção por um espaço.\n"
+"     \n"
+"     Sempre que é chamado, getopts coloca a opção seguinte na variável\n"
+"     da consola $name, inicializa name se não existir e o índice do\n"
+"     argumento seguinte a processar na variável da consola OPTIND.\n"
+"     OPTIND é inicializado em 1 sempre que a consola ou um script da\n"
+"     shellé chamado. Quando uma opção requer um argumento, o\n"
+"     getopts coloca esse argumento  na variável da consola OPTARG.\n"
+"     \n"
+"     O getopts reporta erros de duas formas. Se o primeiro carácter\n"
+"     de OPTCADEIA é \":\", o getopts usa um relatório de erro\n"
+"     silencioso. Neste modo não verá mensagens de erro. Se for vista uma\n"
+"     opção inválida is seen, o getopts põe o carácter de opção em OPTARG.\n"
+"     Se não houver um argumento requerido, o getopts põe um \":\" no NOME e\n"
+"     define OPTARG como o carácter de opção encontrado. Se o getopts não\n"
+"     estiver em modo silêncio e for vista uma opção inválida, o getopts\n"
+"     põe \"?\" no NOME e limpa OPTARG. Se não houver um argumento "
+"requeriso,\n"
+"     é posto \"?\" no NOME, OPTARG é limpoe é imprimida uma mensagem de\n"
+"     diagnóstico.\n"
+"     \n"
+"     Se a variável da consola OPTERR tiver valor 0, o getopts desactiva a\n"
+"     impressão de mensagens de erro, mesmo que o 1º carácter de\n"
+"     CADEIAOPÇÕES não seja \":\". OPTERR tem o valor 1 predefinido.\n"
+"     \n"
+"     O getopts normalmente analisa os parâmetros posicionais ($0 - $9), mas "
+"se\n"
+"     receber mais argumentos, são eles que são analisados.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve sucesso se encontrar uma opção; falha se o fim da opção for\n"
+"     encontrado ou se ocorrer um erro."
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"Substitui a consola com o comando indicado.\n"
+"     \n"
+"     Executar COMANDO, substituindo esta consola pelo programa "
+"especificado.\n"
+"     ARGUMENTOS tornam-se os argumentos de COMANDO. Se COMANDO não for "
+"especificado,\n"
+"     quaisquer redireccionamentos têm efeito na consola actual.\n"
+"     \n"
+"     Opções:\n"
+"        -a nome\tpassa NOME como argumento 0 a COMANDO\n"
+"        -c\texecuta COMANDO com um ambiente vazio\n"
+"        -l\tpõe uma barra no argumento 0 de COMANDO\n"
+"     \n"
+"     Se o comando não puder ser executado, uma consola não interactiva sai, "
+"a não ser que\n"
+"     a opção de consola \"execfail\" esteja definida.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve sucesso a não ser que COMANDO não seja encontrado ou ocorra um "
+"erro de redireccionamento."
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Sai da consola.\n"
+"     \n"
+"     Sai da consola com estado N. Se N for omitido, o estado de saída\n"
+"     é o do último comando executado."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Sai de uma consola com sessão.\n"
+"     \n"
+"     Sai de uma consola com sessão com estado de saída N.  Devolve um erro "
+"se não for\n"
+"     executado numa consola com sessão."
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"Mostra ou executa comandos da lista do histórico.\n"
+"     \n"
+"     fc é usado para listar ou editar e re-executar comandos da lsiat do "
+"histórico.\n"
+"     PRIMEIRO e ÚLTIMO podem ser números especificando o intervalo, ou "
+"PRIMEIRO pode ser\n"
+"     cadeia, que significa o comando mais recente começado por essa\n"
+"     cadeia.\n"
+"     \n"
+"     Opções:\n"
+"        -e NOMEED\tseleciona o editor a usar.  A predefinição é FCEDIT, "
+"depois EDITOR,\n"
+"     \t\tdepois vi\n"
+"        -l \tlistar linhas em vez de editar\n"
+"        -n\tomitir nºs de linha ao ouvir\n"
+"        -r\treverter a ordem das linhas (mais recentes primeiro)\n"
+"     \n"
+"     Com o formato \"fc -s [pat=rep ...] [comando]\", COMANDO é\n"
+"     re-executado após a substituição VELHO=NOVO ser realizada.\n"
+"     \n"
+"     Um aliás útil a usar aqui é r=\"fc -s\", para que inserir \"r cc\"\n"
+"     executa o último comando começado por \"cc\" e inserir \"r\" re-"
+"executa\n"
+"     o último comando.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve sucesso ou estado do comando executado; não-zero se ocorrer um "
+"erro."
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Move a tarefa para 1º plano.\n"
+"     \n"
+"     Coloca a tarefa identificada com JOB_SPEC em 1º plano, tornando-a a\n"
+"     tarefa actual. Se JOB_SPEC não existir, é usada a noção da consola de\n"
+"     tarefa actual.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Estado do comando colocado em 1º plano ou falha se ocorrer um erro."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Move a tarefa para 2º plano.\n"
+"     \n"
+"     Coloca a tarefa identificada com cada JOB_SPEC em 2º plano, como se "
+"tivessem\n"
+"     sido iniciados com \"&\". Se JOB_SPEC não existir, é usada a noção da "
+"consola de\n"
+"     tarefa actual.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve sucesso a não ser que o controlo de tarefas esteja inactivo ou "
+"ocorra um erro."
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"Recorda ou mostra localizações de programas.\n"
+"     \n"
+"     Determina e recorda o caminho completo de cada comando NOME. Se\n"
+"     não tiver argumentos, é mostrada informação sobre comando recordados.\n"
+"     \n"
+"     Opções:\n"
+"        -d\tesquecer a localização recordada de cada NOME\n"
+"        -l\tmostrar num formato que possa ser usado como entrada\n"
+"        -p caminho\tuse CAMINHO como caminho completo para NOME\n"
+"        -r\tesquecer todas as localizações recordadas\n"
+"        -t\timprimir a localização recordada de cada NOME, precedendo-a\n"
+"     \t\tdo correspondente NOME se forem\n"
+"     \t\tindicados múltiplos NOMEs\n"
+"     Argumentos:\n"
+"        NOME\tCada NOME é procurado no $PATH e adicionado à lista\n"
+"     \t\tde comandos lembrados.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve sucesso a não ser que NOME não seja encontrado ou indique uma "
+"opção inválida."
+
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Mostra informação sobre comandos internos.\n"
+"     \n"
+"     Mostra breves resumos de comandos internos. Se PADRÃO for\n"
+"     especificado, dá ajuda detalhada em todos os comandos que cumpram "
+"PADRÃO,\n"
+"     senão imprime a lista de tópicos de ajuda.\n"
+"     \n"
+"     Opções:\n"
+"        -d\tmostra uma descrição breve de cada tópico\n"
+"        -m\tmostra uso em formato pseudo-manpage\n"
+"        -s\tmostra só uma sinopse curta para cada tópico que cumpre\n"
+"     \t\tPADRÃO\n"
+"     \n"
+"     Argumentos:\n"
+"        PADRÃO\tPadrão que especifica um tópico de ajuda\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve sucesso a não ser que PADRÃO não seja encontrado ou indique uma "
+"opção inválida."
+
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Mostra ou manipula a lista do histórico.\n"
+"     \n"
+"     Mostra a lista do histórico com nºs de linha, prefixando cada entrada\n"
+"     modificada com um \"*\". Um argumento de N lista só as últimas N "
+"entradas.\n"
+"     \n"
+"     Opções:\n"
+"        -c\tlimpa a lista eliminado todas as entradas\n"
+"        -d desvio\telimina a entrada do histórico na posição DESVIO.\n"
+"    \t\tDesvios negativos contam-se do final da lista do histórico\n"
+"     \n"
+"        -a\tacrescenta linhas de histórico desta sessão ao ficheiro de "
+"histórico\n"
+"        -n\tlê todas as linhas de histórico ainda não lidas do ficheiro de "
+"histórico\n"
+"     \t\te acrescenta-as à lista de histórico\n"
+"        -r\tlê o ficheiro de histórico e acrescenta o conteúdo à lista de\n"
+"     \t\thistórico\n"
+"        -w\tescreve o histórico actual no ficheiro de histórico\n"
+"     \n"
+"        -p\trealiza expansão do histórico em cada ARG e mostra o resultado\n"
+"     \t\tsem gravar na lista de histórico\n"
+"        -s\tacrescenta ARGs à lista de histórico como entrada única\n"
+"     \n"
+"     Se NOMEFICH for dado, é usado como ficheiro de histórico. Senão,\n"
+"     se FICHHIST tiver um valor, será usado, caso contrário ~/."
+"bash_history.\n"
+"     \n"
+"     Se a variável HISTTIMEFORMAT estiver definida e não for nula, o valor é "
+"usado\n"
+"     como cadeia de formato para strftime(3) para imprimir o carimbo "
+"associado\n"
+"     a cada entrada de histórico mostrada. Senão, não são imprimidos "
+"quaisquer carimbos.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve sucesso a não ser que indique uma opção inválida ou ocorra um "
+"erro."
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"Mostra o estado das tarefas.\n"
+"     \n"
+"     Lista as tarefas activas. JOBSPEC rea cadeiae a saída a essa tarefa.\n"
+"     Sem opções, é mostrado o estado de todas as tarefas activas.\n"
+"     \n"
+"     Opções:\n"
+"        -l\tlista IDs de processo além da informação normal\n"
+"        -n\tlista só processos com estado alterado desde a última\n"
+"     \t\tnotificação\n"
+"        -p\tlista só IDs de processo\n"
+"        -r\trea cadeiae saída a tarefas em execução\n"
+"        -s\trea cadeiae saída a tarefas paradas\n"
+"     \n"
+"     Se -x for usado, COMANDO é executado após todas as especificações de "
+"tarefas\n"
+"     que aparecem em ARGS terem sido substituídas pela ID de processo do "
+"líder de\n"
+"     grupo do processo dessat tarefa.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve sucesso a não ser que indique uma opção inválida ou ocorra um "
+"erro.\n"
+"     Se -x for usado, devolve o estado de saída de COMANDO."
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"Remove tarefas da consola actual.\n"
+"     \n"
+"     Remove cada argumento JOBSPEC da tabela de tarefas activas. Sem\n"
+"     JOBSPECs, a consola usa a sua noção de tarefa actual.\n"
+"     \n"
+"     Opções:\n"
+"        -a\tremove todas as tarefas se JOBSPEC não for indicado\n"
+"        -h\tmarcar cada JOBSPEC para que SIGHUP não seja enviado para a "
+"tarefa\n"
+"     \t\tse a consola receber um SIGHUP\n"
+"        -r\tremove só tarefas em execução\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve sucesso a não ser que uma opção inválida ou JOBSPEC seja "
+"indicada."
+
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Envia um sinal a uma tarefa.\n"
+"     \n"
+"     Envia aos processos identificados por PID ou JOBSPEC o sinal chamado\n"
+"     SIGSPEC ou SIGNUM. Se nem SIGSPEC nem SIGNUM estiverem presentes,\n"
+"     SIGTERM é presumido.\n"
+"     \n"
+"     Opções:\n"
+"        -s sig\tSIG é um nome de sinal\n"
+"        -n sig\tSIG é um número de sinal\n"
+"        -l\tlista nomes de sinais; se se seguirem argumentos, são\n"
+"     \t\tassumidos como nºs de sinal para listar os nomes\n"
+"        -L\tsinónimo de -l\n"
+"     \n"
+"     Mata um interno da consola por dois motivos: permite usar as IDs de "
+"tarefa\n"
+"     em vez de IDs de processo e permite matar processos se o limite de\n"
+"     processos que pode criar for atingido.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve sucesso a não ser que indique uma opção inválida ou ocorra um "
+"erro."
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"Avalia as expressões aritméticas.\n"
+"     \n"
+"     Avalia cada ARG como uma expressão aritmética. A avaliação é feita em\n"
+"     inteiros de largura fixa sem verificação de transporte, embora a "
+"divisão\n"
+"     por 0 seja sinalizada como erro. A seguinte lista de operadores é "
+"agrupada\n"
+"     em níveis de igual prioridade. Os níveis estão listados\n"
+"     por ordem de precedência decrescente.\n"
+"     \n"
+"     \tid++, id--\tvariável pós-incremento, pós-decremento\n"
+"     \t++id, --id\tvariável pré-incremento, pré-decremento\n"
+"     \t-, +\t\tmenos, mais unário\n"
+"     \t!, ~\t\tnegação lógica e bitwise\n"
+"     \t**\t\texponenciação\n"
+"     \t*, /, %\t\tmultiplicação, divisão, resto\n"
+"     \t+, -\t\tadição, subtracção\n"
+"     \t<<, >>\t\tdeslocação esquerda e direita bitwise\n"
+"     \t<=, >=, <, >\tcomparação\n"
+"     \t==, !=\t\tigualdade, não igualdade\n"
+"     \t&\t\tE bitwise\n"
+"     \t^\t\tOUEX bitwise\n"
+"     \t|\t\tOU bitwise\n"
+"     \t&&\t\tE lógico\n"
+"     \t||\t\tOU lógico\n"
+"     \texpr ? expr : expr\n"
+"     \t\t\toperador condicional\n"
+"     \t=, *=, /=, %=,\n"
+"     \t+=, -=, <<=, >>=,\n"
+"     \t&=, ^=, |=\tatribuição\n"
+"     \n"
+"     As variáveis de consola são permitidas como operandos. O nome da "
+"variável\n"
+"     é substituído pelo seu valor (convertido em inteiro de largura fixa) "
+"dentro\n"
+"     de uma expressão. A variável não tem de ter o seu atributo inteiro\n"
+"     activado para ser usado numa expressão.\n"
+"     \n"
+"     Os operadores são avaliados por ordem de precedência. Sub-expressões\n"
+"     entre parênteses são avaliadas primeiro e ignoram as regras de\n"
+"     precedência acima.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Se o último ARG for avaliado como 0, let devolve 1; senão let devolve 0."
+
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"Lê uma linha da entrada padrão e divide-a em campos.\n"
+"     \n"
+"     Lê uma linha da entrada padrão ou do descritor de ficheiro FD\n"
+"     se a opção -u for usada. A linha é dividida em campos como na divisão\n"
+"     de palavras e a primeira palavra é atribuída ao primeiro NOME, a "
+"segunda\n"
+"     ao segundo NOME, e assim por diante, com quaisquer palavras que "
+"sobrem \n"
+"     atribuídas ao último NOME. Só caracteres encontrados em $IFS são "
+"reconhecidos\n"
+"     como delimitadores de palavras.\n"
+"     \n"
+"     Se não indicar NOMEs, a linha é armazenada na variável RESPONDER.\n"
+"     \n"
+"     Opções:\n"
+"        -a matriz\tatribui as palavras lidas a índices sequenciais da "
+"MATRIZ\n"
+"     \t\tcomeçando em zero\n"
+"        -d delim\tcontinua até que o primeiro carácter de DELIM seja lido, "
+"em vez de\n"
+"     \t\tnewline\n"
+"        -e\tusa Readline para obter a linha numa consola interactiva\n"
+"        -i texto\tusa TEXTO como texto inicial para Readline\n"
+"        -n ncars\tvolta após ler NCARS caracteres em vez de esperar\n"
+"     \t\tpor newline, mas respeita um delimitador se estiver\n"
+"     \t\tantes de NCARS caracteres\n"
+"        -N ncars\tvolta após ler exactamente NCARS caracteres, a não ser "
+"que\n"
+"     \t\tEOF seja encontrado ou a leitura esteja inactiva, ignorando\n"
+"     \t\tqualquer delimitador\n"
+"        -p prompt\timprime PROMPT na saída sem newline final antes de\n"
+"     \t\ttentar ler\n"
+"        -r\tnão permite que barras esquerdas escapem qualquer carácter\n"
+"        -s\tnão ecoa entradas vindas de um terminal\n"
+"        -t inacção\tesgota o tempo e devolve falha se uma linha completa\n"
+"     \t\tde entrada não for lida em INACÇÃO segundos. O valor da\n"
+"     \t\tvariável TMOUT é o predefinido de inacção. INACÇÃO pode ser\n"
+"     \t\tuma fracção. Se INACÇÃO for 0, read volta\n"
+"     \t\timediatamente, sem tentar ler quaisquer dados, devolvendo\n"
+"     \t\tsucesso só se a entrada estiver disponível no descritor de\n"
+"     \t\tficheiro especificado. O estado de saída é maior que 128\n"
+"     \t\tse a inacção for excedida\n"
+"        -u fd\tlê do descritor de ficheiro FD em vez da entrada padrão\n"
+"     \n"
+"     Estado de saída:\n"
+"     O código devolvido é zero, a não ser que end-of-file seja encontrado, "
+"haja\n"
+"     inacção (caso em que é maior que 128), ocorra um erro de atribuição de "
+"variável,\n"
+"     ou seja indicado um descritor de ficheiro inválido como argumento de -u."
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"Volta de uma função de consola.\n"
+"     \n"
+"     Força a saída de uma função ou script baseado com o valor especificado\n"
+"     por N. Se N for omitido, o estado de saída é o do último comando\n"
+"     executado dentro da função ou script.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve N, ou falha se a consola não estiver a executar uma função ou "
+"script."
+
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"Define ou limpa valores de opções ou parâmetros posicionais da consola.\n"
+"     \n"
+"     Altera o valor de atributos ou parâmetros posicionais da consola, ou\n"
+"     mostra os nomes e valores de variáveis da consola.\n"
+"     \n"
+"     Opções:\n"
+"        -a  Marca variáveis modificadas ou criadas para exportação.\n"
+"         -b Notifica o fim da tarefa imediatamente.\n"
+"         -e Sai imediatamente se um comando sair com estado diferente de "
+"zero.\n"
+"         -f Desactiva geração de nome de ficheiro (globbing).\n"
+"         -h Recordar localização de comandos à medida que são procurados.\n"
+"         -k Todos os argumentos de atribuição são colocados no ambiente para "
+"um\n"
+"             comando, não só os que precedem o nome do comando.\n"
+"         -m Activa o controlo de tarefas.\n"
+"         -n Lê comandos, mas não os executa.\n"
+"         -option-name\n"
+"             Define a variável correspondente a option-name:\n"
+"                  allexport     igual a -a\n"
+"                  braceexpand  igual a -B\n"
+"                  emacs          usa estilo emacs de edição de linhas\n"
+"                  errexit        igual a -e\n"
+"                  errtrace      igual a -E\n"
+"                  functrace     igual a -T\n"
+"                  hashall        igual a -h\n"
+"                  histexpand    igual a -H\n"
+"                  history        activa histórico de comandos\n"
+"                  ignoreeof     a consola não sai após ler EOF\n"
+"                  interactive-comments\n"
+"                                    permite que comentários apareçam em "
+"comandos interactivos\n"
+"                  keyword        igual a -k\n"
+"                  monitor        igual a -m\n"
+"                  noclobber     igual a -C\n"
+"                  noexec         igual a -n\n"
+"                  noglob         igual a -f\n"
+"                  nolog          actualmente aceite mas ignorado\n"
+"                  notify         igual a -b\n"
+"                  nounset        igual a -u\n"
+"                  onecmd         igual a -t\n"
+"                  physical      igual a -P\n"
+"                  pipefail      o valor devolvido de um pipeline é o estado "
+"do\n"
+"                                    último comando a sair com estado não-"
+"zero,\n"
+"                                    ou zero se nenhum saiu com estado não-"
+"zero\n"
+"                  posix          altera o comportamento do bash onde a "
+"operação\n"
+"                                    predefinida diferir da norma Posix para "
+"cumprir\n"
+"                                    a norma\n"
+"                  privileged    igual a -p\n"
+"                  verbose        igual a -v\n"
+"                  vi              usa estilo vi de edição de linhas\n"
+"                  xtrace         igual a -x\n"
+"        -p  Activado sempre que as ID de utilizador reais e efectivas não\n"
+"             coincidam. Desactiva o processamento do ficheiro $ ENV e a \n"
+"             importação de funções da consola. Desligar esta opção faz com\n"
+"             que os uid e gid efectivos sejam definidos para os uid e gid "
+"reais.\n"
+"        -t  Sair depois de ler e executar um comando.\n"
+"        -u  Trata as variáveis ​​não definidas como erro ao substituir.\n"
+"        -v  Imprime as linhas de entrada da consola à medida que são lidas.\n"
+"        -x  Imprime comandos e seus argumentos à medida que são executados.\n"
+"        -B  a consola realizará expansão de suporte\n"
+"        -C  Se definido, não permitir que ficheiros normais existentes "
+"sejam\n"
+"             sobrescritos pelo redireccionamento da saída.\n"
+"        -E  se definido, ERR é herdada pelas funções de consola.\n"
+"        -H  Activa estilo ! de substituição do histórico. Esta bandeira\n"
+"             está activada por predefinição, em consolas interativas.\n"
+"        -P  Se definido, não resolve ligações simbólicas ao executar\n"
+"             comandos como \"cd\" que altera a pasta actual.\n"
+"        -T  Se definido, DEBUG e RETURN são herdadas por funções de "
+"consola.\n"
+"        --  Atribui quaisquer outros argumentos aos parâmetros posicionais.\n"
+"             Se não houver mais argumentos, os parâmetros posicionais\n"
+"             são limpos.\n"
+"        -    Atribui quaisquer outros argumentos aos parâmetros "
+"posicionais.\n"
+"             As opções -x e -v são desactivadas.\n"
+"     \n"
+"     Usar + em vez de - faz com que as bandeiras sejam desactivadas. As\n"
+"     bandeiras também podem ser usadas por chamada da consola. O actual\n"
+"     conjunto de bandeiras pode ser encontrado em $-. Os n restantes ARGs\n"
+"     são parâmetros posicionais e são atribuídos, em ordem, a $1, $2 .. $n.\n"
+"     Se não houver ARGs, todas as variáveis de consola são imprimidas.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve sucesso a não ser que indique uma opção inválida."
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"Limpa valores e atributos de variáveis e funções da consola.\n"
+"     \n"
+"     Para cada NOME, remove a correspondente variável ou função.\n"
+"     \n"
+"     Opções:\n"
+"        -f\ttrata cada NOME como função de consola\n"
+"        -v\ttrata cada NOME como variável de consola\n"
+"        -n\ttrata cada NOME como referência de nome e limpa a própria\n"
+"     \t\tvariável em vez da variável que referencia\n"
+"     \n"
+"     Sem opções, unset primeiro tenta limpar uma variável e, se falhar,\n"
+"     tenta limpar uma função.\n"
+"     \n"
+"     Algumas variáveis não podem ser limpas; veja também \"readonly\".\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve sucesso a não ser que indique uma opção inválida ou NOME seja "
+"só de leitura."
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Define o atributo de exportação em variáveis de consola.\n"
+"     \n"
+"     Marca cada NOME para exportação automática para o ambiente de futuros\n"
+"     comandos executados. Se VALOR for fornecido, atribui VALOR antes de "
+"exportar.\n"
+"     \n"
+"     Opções:\n"
+"        -f\trefere funções de consola\n"
+"        -n\tremove a propriedade de exportação de cada NOME\n"
+"        -p\tmostra uma lista de todas as funções e variáveis exportadas\n"
+"     \n"
+"     Um argumento \"--\" desactiva futuro processamento da opção.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve sucesso a não ser que indique uma opção inválida ou NOME seja "
+"inválido."
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Marca as variáveis de consola como imutáveis.\n"
+"     \n"
+"     Marca cada NOME como só de leitura; os valores destes NOMEs não podem\n"
+"     ser alterados por subsequentes atribuições. Se VALOR for fornecido,\n"
+"     atribui VALOR antes de marcar como só de leitura.\n"
+"    \n"
+"     Opções:\n"
+"        -a\trefere a variáveis de matriz indexadas\n"
+"        -A\trefere a variáveis de matriz associativas\n"
+"        -f\trefere a funções de consola\n"
+"        -p\tmostra uma lista de todas as variáveis ou funções só de "
+"leitura,\n"
+"     \t\tdependendo ou não se a opção -f é indicada\n"
+"     \n"
+"     Um argumento \"--\" desactiva futuro processamento da opção.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve sucesso a não ser que indique uma opção inválida ou NOME seja "
+"inválido."
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"Deslocar parâmetros posicionais.\n"
+"     \n"
+"     Renomear os parâmetros posicionais $N+1,$N+2 ... para $1,$2 ... Se N\n"
+"     for omitido, presume-se como 1.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve sucesso a não ser que N seja negativo ou maior que $#."
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Executa comandos de um ficheiro na consola actual.\n"
+"     \n"
+"     Lê e execute comandos do NOMEFICH na consola actual. As\n"
+"     entradas em $PATH são usadas para encontrar a pasta contendo NOMEFICH.\n"
+"     Se nenhum ARGUMENTO for fornecido,tornam-se parâmetros posicionais\n"
+"     quando NOMEFICH é executado.\n"
+"    \n"
+"     Estado de saída:\n"
+"     Devolve o estado do último comando executado em NOMEFICH; falha se\n"
+"     NOMEFICH não pode ser lido."
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Suspende a execução da consola.\n"
+"     \n"
+"     Suspende a execução desta consola até receber um sinal SIGCONT.\n"
+"     Se não forem forçadas, as consolas com sessão não podem ser suspensas.\n"
+"     \n"
+"     Opções:\n"
+"        -f\tforçar a suspensão, mesmo que seja uma consola com sessão\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve sucesso a não ser que o controlo de tarefa esteja inactivo ou "
+"ocorra um erro."
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"Avalia a expressão condicional.\n"
+"     \n"
+"     Sai com estado 0 (verdadeiro) ou 1 (falso) dependendo da\n"
+"     avaliação de EXPR. As expressões podem ser unárias ou binárias. "
+"Expressões\n"
+"     uinárias são frequentemente usadas para examinar o estado de um "
+"ficheiro. Há\n"
+"     também operadores de cadeias e operadores de comparação numérica.\n"
+"     \n"
+"     O comportamento do teste depende do número de argumentos. Leia a\n"
+"     página do manual do bash para a especificação completa.\n"
+"     \n"
+"     Operadores de ficheiros:\n"
+"     \n"
+"        -a FICHEIRO     Verdadeiro se o ficheiro existir.\n"
+"        -b FICHEIRO     Verdadeiro se o ficheiro for bloqueio especial.\n"
+"        -c FICHEIRO     Verdadeiro se o ficheiro for especial de "
+"caracteres.\n"
+"        -d FICHEIRO     Verdadeiro se o ficheiro for uma pasta.\n"
+"        -e FICHEIRO     Verdadeiro se o ficheiro existir.\n"
+"        -f FICHEIRO     Verdadeiro se o ficheiro existe e é um ficheiro "
+"normal.\n"
+"        -g FICHEIRO     Verdadeiro se o ficheiro for set-group-id.\n"
+"        -h FICHEIRO     Verdadeiro se o ficheiro for uma ligação simbólica.\n"
+"        -L FICHEIRO     Verdadeiro se o ficheiro for uma ligação simbólica.\n"
+"        -k FICHEIRO     Verdadeiro se o ficheiro tiver o bit \"sticky\" "
+"definido.\n"
+"        -p FICHEIRO     Verdadeiro se o ficheiro for um pipe com nome.\n"
+"        -r FICHEIRO     Verdadeiro se o ficheiro for legível.\n"
+"        -s FICHEIRO     Verdadeiro se o ficheiro existe e não está vazio.\n"
+"        -S FICHEIRO     Verdadeiro se o ficheiro for um socket.\n"
+"        -t FD             Verdadeiro se FD for aberto num terminal.\n"
+"        -u FICHEIRO     Verdadeiro se o ficheiro for set-user-id.\n"
+"        -w FICHEIRO     Verdadeiro se o ficheiro for gravável por si.\n"
+"        -x FICHEIRO     Verdadeiro se o ficheiro for executável por si.\n"
+"        -O FICHEIRO     Verdadeiro se o ficheiro for efectivamente sua "
+"propriedade.\n"
+"        -G FICHEIRO     Verdadeiro se o ficheiro for efectivamente "
+"propriedade do seu grupo.\n"
+"        -N FICHEIRO     Verdadeiro se o ficheiro foi modificado desde a "
+"última vez que foi lido.\n"
+"     \n"
+"         FICHEIRO1 -nt FICHEIRO2 Verdadeiro se o ficheiro1 for mais novo "
+"que\n"
+"                                         o ficheiro2 (de acordo com a data "
+"de modificação).\n"
+"     \n"
+"         FICHEIRO1 -ot FICHEIRO2 Verdadeiro se ficheiro1 for mais antigo que "
+"o ficheiro2.\n"
+"     \n"
+"         FICHEIRO1 -ef FICHEIRO2 Verdadeiro se ficheiro1 for uma ligação "
+"rígida a file2.\n"
+"     \n"
+"     Operadores de cadeias:\n"
+"     \n"
+"         -z CADEIA        Verdadeiro se a cadeia estiver vazia.\n"
+"     \n"
+"         -n CADEIA\n"
+"             CADEIA        Verdadeiro se a cadeia não estiver vazia.\n"
+"     \n"
+"         CADEIA1 = CADEIA2\n"
+"                             Verdadeiro se as cadeias são iguais.\n"
+"         CADEIA1 != CADEIA2\n"
+"                             Verdadeiro se as cadeias não são iguais.\n"
+"         CADEIA1 < CADEIA2\n"
+"                             Verdadeiro se CADEIA1 ficar antes de CADEIA2 "
+"lexicamente.\n"
+"         CADEIA1 > CADEIA2\n"
+"                             Verdadeiro se CADEIA1 ficar após CADEIA2 "
+"lexicamente.\n"
+"     \n"
+"     Outros operadores:\n"
+"     \n"
+"        -o OPÇÃO         Verdadeiro se a opção de consola OPÇÃO está "
+"activada.\n"
+"        -v VAR            Verdadeiro se a variável de consola VAR estiver "
+"definida.\n"
+"        -R VAR            Verdadeiro se a variável de consola VAR estiver "
+"definida e for um nome\n"
+"                            referência.\n"
+"        ! EXPR            Verdadeiro se EXPR for falso.\n"
+"        EXPR1 -a EXPR2 Verdadeiro se EXPR1 e EXPR2 forem verdadeiros.\n"
+"        EXPR1 -o EXPR2 Verdadeiro se EXPR1 OU EXPR2 forem verdadeiros.\n"
+"     \n"
+"        arg1 OP arg2    Testes aritméticos. OP é um de -eq, -ne,\n"
+"                           -lt, -le, -gt, ou -ge.\n"
+"     \n"
+"     Operadores binários aritméticos devolvem verdadeiro se ARG1 for igual, "
+"não\n"
+"     igual, menor que, menor ou igual que, maior que ou maior ou igual que\n"
+"     ARG2.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve sucesso se EXPR for avaliada como verdadeiro; falha se EXPR "
+"for\n"
+"     avaliado como falso ou for indicado um argumento inválido."
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Avalia uma expressão condicional.\n"
+"     \n"
+"     Este é um sinónimo para o interno \"test\", mas o último argumento tem\n"
+"     de ser um \"]\" literal, para fechar o \"[\" aberto."
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Mostrar tempos de processo.\n"
+"     \n"
+"     Imprime os tempos acumulados de utilizador e sistema para a consola e "
+"todos\n"
+"     os seus processos-filho.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Sempre com sucesso."
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"Capturar sinais e outros eventos.\n"
+"     \n"
+"     Define e activa gestores a executar quando a consola recebe sinais ou\n"
+"     outras condições.\n"
+"     \n"
+"     ARG é um comando a ser lido e executado quando a consola recebe o(s)\n"
+"     sinal(is) SIGNAL_SPEC. Se ARG estiver ausente (e um único SIGNAL_SPEC\n"
+"     for fornecido) ou \"-\", cada sinal especificado é reposto no seu "
+"valor\n"
+"     original. Se ARG for a cadeia nula, cada SIGNAL_SPEC será ignorado\n"
+"     pela consola e pelos comandos que chama.\n"
+"     \n"
+"     Se um SIGNAL_SPEC for EXIT (0) ARG é executado na saída da consola. Se\n"
+"     SIGNAL_SPEC é DEBUG, ARG é executado antes de cada comando simples. Se\n"
+"     SIGNAL_SPEC é RETURN, ARG é executado cada vez que uma função de "
+"consola\n"
+"     ou um script executado pelo . ou os internos terminam a execução. "
+"SIGNAL_SPEC\n"
+"     de ERR significa executar ARG cada vez que uma falha do comando faça "
+"com\n"
+"     que a consola sair quando a opção -e está activa.\n"
+"     \n"
+"     Se nenhum argumento for fornecido, trap imprime a lista de comandos \n"
+"     associados a cada sinal.\n"
+"     \n"
+"     Opções:\n"
+"        -l imprime uma lista de nomes de sinais e seus números "
+"correspondentes\n"
+"        -p mostra os comandos trap associados a cada SIGNAL_SPEC\n"
+"     \n"
+"     Cada SIGNAL_SPEC é um nome de sinal em <signal.h> ou um número de "
+"sinal.\n"
+"     Os nomes dos sinais são insensíveis a maiúsculas e o prefixo SIG é "
+"opcional.\n"
+"     Um sinal pode ser enviado para a consola com \"kill -signal $$\".\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve sucesso a não ser que SIGSPEC seja inválido ou indique uma "
+"opção inválida."
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"Mostra informações sobre o tipo de comando.\n"
+"     \n"
+"     Para cada NOME, indica como seria interpretado se usado como um\n"
+"     nome de comando.\n"
+"     \n"
+"     Opções:\n"
+"        -a\tmostra todos os locais contendo um executável chamado NOME;\n"
+"     \t\tinclui aliás, internos e funções, se e só se a opção \"-p\"\n"
+"     \t\ttambém não for usada\n"
+"        -f\tsuprime a procura da função de consola\n"
+"        -P\tforça uma procura em PATH para cada NOME, mesmo que seja um\n"
+"     \t\taliás, interno ou função e devolve o nome do ficheiro em disco\n"
+"     \t\tque seria executado\n"
+"        -p\tdevolve o nome do ficheiro em disco que seria executado,\n"
+"     \t\tou nada se \"type -t NOME\" não devolver \"file\"\n"
+"        -t\tdevolve uma só palavra de entre \"alias\", \"keyword\", "
+"\"function\"\n"
+"     \t\t\"builtin\", \"file\" ou \"\", se NOME for um aliás, palavra "
+"reservada\n"
+"     \t\tda consola, função de consola, interno da consola, ficheiro em\n"
+"     \t\tdisco, ou não encontrados, respectivamente\n"
+"     \n"
+"     Argumentos:\n"
+"        Nome do comando NOME a interpretar.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve sucesso se todos os NOMEs forem encontrados; falha se algum não "
+"for."
+
+#: builtins.c:1431
+#, fuzzy
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Modifica os limites de recursos da consola.\n"
+"     \n"
+"     Fornece controlo sobre os recursos disponíveis para consola e "
+"processos\n"
+"     que cria, em sistemas que permitem esse controlo.\n"
+"     \n"
+"     Opções:\n"
+"        -S\tusa o limite de recursos \"soft\"\n"
+"        -H\tusa o limite de recursos \"hard\"\n"
+"        -a\ttodos os limites actuais são reportados\n"
+"        -b\to tamanho do buffer de socket\n"
+"        -c\to tamanho máximo dos ficheiros núcleo criados\n"
+"        -d\to tamanho máximo do segmento de dados de um processo\n"
+"        -e\ta prioridade máxima de agendamento (\"nice\")\n"
+"        -f\to tamanho máximo dos ficheiros escritos pela consola e seus "
+"filhos\n"
+"        -i\to número máximo de sinais pendentes\n"
+"        -k\to número máximo de kqueues alocados para este processo\n"
+"        -l\to tamanho máximo que um processo pode bloquear na memória\n"
+"        -m\to tamanho máximo do conjunto residente\n"
+"        -n\to número máximo de descritores de ficheiros abertos\n"
+"        -p\to tamanho do buffer do pipe\n"
+"        -q\to número máximo de bytes nas filas de mensagens POSIX\n"
+"        -r\ta prioridade máxima de programação em tempo real\n"
+"        -s\to tamanho máximo da pilha\n"
+"        -t\ta quantidade máxima de tempo de CPU em segundos\n"
+"        -u\to número máximo de processos do utilizador\n"
+"        -v\to tamanho da memória virtual\n"
+"        -x\to número máximo de bloqueios de ficheiros\n"
+"        -P\to número máximo de pseudo-terminais\n"
+"        -T\to número máximo de threads\n"
+"     \n"
+"     Nem todas as opções estão disponíveis em todas as plataformas.\n"
+"     \n"
+"     Se LIMIT for indicada, é o novo valor do recurso especificado; Os\n"
+"     valores LIMIT especiais \"soft\", \"hard\" e \"unlimited\" representam\n"
+"     olimite flexível actual, o limite rígido actual e nenhum limite, "
+"respectivamente.\n"
+"     Caso contrário, é imprimido o valor actual do recurso especificado. Se\n"
+"     nenhuma opção for indicada, então -f é assumido.\n"
+"     \n"
+"     Os valores estão em incrementos de 1024 bytes, exceto para -t, que é em "
+"segundos,\n"
+"     -p, que é em incrementos de 512 bytes e -u, que é um número de "
+"processos\n"
+"     sem escala.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve sucesso a não ser que seja indicada uma opção inválida ou "
+"ocorra um erro."
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"Mostrar ou definir a máscara do modo de ficheiro.\n"
+"     \n"
+"     Define a máscara do utilizador de criação de ficheiro para MODO. Se "
+"MODO\n"
+"     for omitido, imprime o valor actual da máscara.\n"
+"     \n"
+"     Se MODO começa com um dígito, é interpretado como um número octal;\n"
+"     caso contrário, é uma cadeia de modo simbólico como a aceite por "
+"chmod(1).\n"
+"     \n"
+"     Opções:\n"
+"        -p\tse MODO for omitido, saída de forma a que possa ser reutilizado "
+"como entrada\n"
+"        -S\ttorna a saída simbólica; caso contrário, a saída é um número "
+"octal\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve sucesso a não ser que MODO seja inválido ou indique uma opção "
+"inválida."
+
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"Aguarda a conclusão da tarefa e devolve o estado de saída.\n"
+"     \n"
+"     Espera por cada processo identificado por uma ID, que pode ser uma ID "
+"de\n"
+"     processo ou uma especificação de tarefa e reporta o estado final. Se "
+"não\n"
+"     for dada uma ID, aguarda por todos os processos-filho actualmente "
+"activos e o\n"
+"     estado de saída é zero. Se ID for uma especificação de tarefa, espera "
+"por\n"
+"     todos os processos no pipeline da tarefa.\n"
+"     \n"
+"     Se a opção -n for fornecida, espera que a próxima tarefa termine e\n"
+"     devolve seu estado de saída.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve o estado da última ID; falha se a ID for inválida ou for "
+"indicada\n"
+"     uma opção inválida."
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"Aguarda a conclusão do processo e devolve o estado de saída.\n"
+"     \n"
+"     Espera por cada processo especificado por uma PID e reporta o estado "
+"final.\n"
+"     Se PID não for dada, aguarda por todos os processos-filho actualmente "
+"activos,\n"
+"     e o estado devolvido é zero. A PID tem de ser uma ID de processo.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve o estado da última PID; falha se PID for inválido ou for "
+"indicada\n"
+"     uma opção inválida."
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Executa comandos para cada membro numa lista.\n"
+"     \n"
+"     O ciclo \"for\" executa uma seqüência de comandos para cada membro "
+"numa\n"
+"     lista de itens. Se \"in PALAVRAS ...;\" não estiver presente, \" in \"$@"
+"\" \" é\n"
+"     assumido. Para cada elemento em PALAVRAS, NOME está definido para "
+"esseelemento,\n"
+"     e os COMANDOS são executados.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve o estado do último comando executado."
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Ciclo for aritmético.\n"
+"     \n"
+"     Equivalente a\n"
+"     \t(( EXP1 ))\n"
+"     \twhile (( EXP2 )); do\n"
+"     \t\tCOMANDOS\n"
+"     \t\t(( EXP3 ))\n"
+"     \tdone\n"
+"     EXP1, EXP2 e EXP3 são expressões aritméicas. Se alguma delas for "
+"omitida\n"
+"     comporta-se como se fosse avaliada como 1.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve o estado do último comando executado."
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Selecciona palavras de uma lista e executa comandos.\n"
+"     \n"
+"     As PALAVRAS são expandidas, gerando uma lista de palavras. O\n"
+"     conjunto de palavras expandidas é imprimido no erro padrão, cada\n"
+"     um precedido por um número. Se \"in PALAVRAS\" não estiver presente,\n"
+"     \" in \"$@\" \" é assumido. O prompt PS3 é então exibido e é lida uma\n"
+"     linha da entrada padrão. Se a linha for constituída pelo número\n"
+"     correspondente a uma das palavras mostradas, NOME é definido para\n"
+"     essa palavra. Se a linha estiver vazia, PALAVRAS e o prompt são\n"
+"     mostrados de novo. Se for lido EOF, o comando é concluído. Qualquer\n"
+"     outro valor lido faz com que NOME seja definido como nulo. A linha\n"
+"     lida é gravada na variável RESPOSTA. COMANDOS são executados após cada\n"
+"     selecção até que um comando de interrupção seja executado.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve o estado do último comando executado."
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"Reporta o tempo consumido pela execução do pipeline.\n"
+"     \n"
+"     Executa PIPELINE e imprime um resumo do tempo real, tempo de CPU do,\n"
+"     utilizador e tempo de CPU do sistema na execução de PIPELINE quando "
+"terminar.\n"
+"     \n"
+"     Opções:\n"
+"        -p\timprime o resumo do tempo no formato portátil Posix\n"
+"    \n"
+"     O valor da variável FORMATOTEMPO é usado como formato de saída.\n"
+"    \n"
+"     Estado de saída:\n"
+"     O estado devolvido é o estado de PIPELINE."
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Executea comandos baseado em comparação de padrões.\n"
+"     \n"
+"     Executar selectivamente COMANDOS baseado na comparação entre PALAVRA e\n"
+"     PADRÃO. \"|\" é usado para separar múltiplos padrões.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve o estado do último comando executado."
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Executa comandos com base em condicional.\n"
+"     \n"
+"     A lista \"if COMANDOS\" é executada. Se o estado de saída for zero, é\n"
+"     executada a lista \"then COMANDOS\". Caso contrário, cada lista \"elif "
+"COMANDOS\"\n"
+"     é executado por sua vez e se o estado de saída for zero, a "
+"correspondente\n"
+"     lista \"then COMANDOS\" é executada e o comando if é concluído. De "
+"outra forma,\n"
+"     a lista \"else COMANDOS\" é executada, se presente. O estado de saída "
+"da\n"
+"     construção inteira é o estado de saída do último comando executado, ou "
+"zero\n"
+"     se nenhuma condição for verdadeira.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve o estado do último comando executado."
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Executa comandos enquanto o teste tiver sucesso.\n"
+"     \n"
+"     Expande e executa COMANDOS enquanto o comando final no ciclo\n"
+"     \"while COMANDOS\" tenha um estado de saída zero.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve o estado do último comando executado."
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Executa comandos enquanto o teste não tiver sucesso.\n"
+"     \n"
+"     Expande e executa COMANDOS enquanto o comando final no ciclo\n"
+"     \"until COMANDOS\" tenha um estado de saída não zero.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve o estado do último comando executado."
+
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"Cria um co-processo chamado NOME.\n"
+"     \n"
+"     Executa COMANDO assincronamente, com a saída e a entrada padrão "
+"ligadas\n"
+"     via pipe a descritores de ficheiro atribuídos a índices 0 e 1 de uma \n"
+"     variável de matriz NOME na consola em execução.\n"
+"     O NOME predefinido é \"COPROC\".\n"
+"     \n"
+"     Estado de saída:\n"
+"     O comando coproc devolve um estado de saída 0."
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"Define uma função de consola.\n"
+"     \n"
+"     Cria uma função de consola chamada NOME. Quando chamado como comando\n"
+"     simples, NOME executa COMANDOs no contexto da consola. Quando NOME é\n"
+"     invoked, os argumentos são passados à função como $1...$n e o nome da\n"
+"     função está em $FUNCNAME.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve sucesso a não ser que NOME seja só de leitura."
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Agrupa comandos como uma unidade.\n"
+"     \n"
+"     Executa um conjunto de comandos num grupo. Esta é uma maneira de\n"
+"     redireccionar um conjunto completo de comandos.\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve o estado do último comando executado."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"Retoma a tarefa em primeiro plano.\n"
+"     \n"
+"     Equivalente ao argumento JOB_SPEC para o comando \"fg\". Retoma uma\n"
+"     tarefa parada ou em 2º plano. JOB_SPEC pode especificar um nome de\n"
+"     tarefa ou um número de tarefa. Pôr \"&\" a seguir a JOB_SPEC coloca a\n"
+"     tarefa em 2º plano, como se a especificação da tarefa tivesse sido\n"
+"     fornecida como um argumento para \"bg\".\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve o estado da tarefa retomada."
+
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Avalia uma expressão aritmética.\n"
+"     \n"
+"     A expressão EXPRESSÃO é avaliada de acordo com as regras aritméticas.\n"
+"     Equivalente a \"let EXPRESSÃO\".\n"
+"     \n"
+"     Estado de saída:\n"
+"     Devolve 1 se EXPRESSÃO avaliar como 0; senão, devolve 0."
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"Executa o comando condicional.\n"
+"     \n"
+"     Devolve um estado de 0 ou 1, dependendo da avaliação da expressão\n"
+"     condicional EXPRESSÃO. As expressões são compostas pelas mesmas "
+"primárias\n"
+"     usadas pelo interno \"test\" e pode ser combinado com os seguintes "
+"operadores:\n"
+"     \n"
+"        ( EXPRESSÃO )\tDevolve o valor de EXPRESSÃO\n"
+"        ! EXPRESSÃO\t\tVerdadeiro se EXPRESSÃO for falsa; senão falso\n"
+"        EXPR1 && EXPR2\tVerdadeiro se EXPR1 e EXPR2 forem verdadeiras; senão "
+"falso\n"
+"        EXPR1 || EXPR2\tVerdadeiro se EXPR1 ou EXPR2 forem verdadeiras; "
+"senão falso\n"
+"     \n"
+"     Quando os operadores \"==\" e \"! =\" são usados, a cadeia à direita do "
+"operador\n"
+"     é usada como padrão e é feita a comparação de padrões. Quando o "
+"operador \"= ~\"\n"
+"     é usado, a cadeia à direita do operador é comparada como expressão "
+"regular.\n"
+"     \n"
+"     Os operadores && e || não avaliam EXPR2 se EXPR1 for suficiente para\n"
+"     determinar o valor da expressão."
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"Nomes e uso comuns de variáveis de consola.\n"
+"    \n"
+"    BASH_VERSION\tInformações de versão para esta bash.\n"
+"    CDPATH\tUma lista de pastas separadas por \":\" para procurar\n"
+"    \t\tpor pastas dadas como argumentos a \"cd\".\n"
+"    GLOBIGNORE\tUma lista de padrões separada por \":\" que descreve nomes "
+"de\n"
+"    ficheiro a ignorar pela expansão do nome do caminho.\n"
+"    HISTFILE\tNome de ficheiro onde o seu histórico de comandos é "
+"armazenado.\n"
+"    HISTFILESIZE\tNúmero máximo de linhas que este ficheiro pode conter.\n"
+"    HISTSIZE\tNúmero máximo de linhas de histórico a que uma consola em \n"
+"    \t\texecução pode aceder.\n"
+"    HOME\tNome completo do caminho para a pasta de início de sessão.\n"
+"    HOSTNAME\tNome do anfitrião actual.\n"
+"    HOSTTYPE\tTipo de CPU em que esta versão do Bash está em execução.\n"
+"    IGNOREEOF\tControla a acção da consola ao receber um carácter EOF\n"
+"    \t\tcomo única entrada. Se definido, então o seu valor é o\n"
+"    \t\tnúmero de caracteres EOF que podem ser vistos numa linha\n"
+"    \t\tvazia antes que a consola saia (predefinição 10).\n"
+"    \t\tQuando não definido, EOF significa o fim da entrada.\n"
+"    MACHTYPE\tDescrição do sistema actual em que a bash está em execução.\n"
+"    MAILCHECK\tFrequência, em segundos, com que a bash procura novo "
+"correio.\n"
+"    MAILPATH\tLista de ficheiros separados por \":\" onde a bash procura\n"
+"    \t\tnovas mensagens.\n"
+"    OSTYPE\tVersão Unix em que esta versão da bash está em execução.\n"
+"    PATH\tLista de pastas separadas por \":\" a procurar quando\n"
+"    \t\tprocura comandos.\n"
+"    PROMPT_COMMAND\tComando a executar antes da impressão de cada\n"
+"    \t\tprompt primário.\n"
+"    PS1\t\tCadeia do prompt primário.\n"
+"    PS2\t\tCadeia do prompt secundário\n"
+"    PWD\t\tCaminho completo da pasta actual.\n"
+"    SHELLOPTS\tLista separada por \":\" de opções da consola activadas.\n"
+"    TERM\tNome do tipo de terminal actual.\n"
+"    TIMEFORMAT\tFormato de saída para estatísticas de tempo mostradas\n"
+"    pela palavra reservada \"time\".\n"
+"    auto_resume\tNão-nulo significa que uma palavra de comando numa linha\n"
+"    \t\tpor si só é procurada primeiro na lista de tarefas actualmente\n"
+"    \t\tparadas. Se encontrado, a tarefa passa a primeiro plano. Um\n"
+"    \t\tvalor \"exact\" significa que a palavra de comando deve ser\n"
+"    \t\texactamente igual a um comando na lista de tarefas paradas.\n"
+"    \t\t\"substring\" significa que a palavra de comando deve ser igual\n"
+"    \t\ta uma sub-cadeia da tarefa. Qualquer outro valor significa que\n"
+"    \t\to comando deve ser um prefixo de uma tarefa interrompida.\n"
+"    histchars\tCaracteres que controlam a expansão do histórico e "
+"substituições\n"
+"    \t\trápidas. O primeiro carácter é o carácter de subtituição do\n"
+"    \t\thistórico, normalmente \"!\". O 2º é o de substituição rápida,\n"
+"    \t\thabitualmente \"^\". O terceiro é o comentário do histórico,\n"
+"    \t\tnormalmente \"#\".\n"
+"    HISTIGNORE\tLista de padrões separada por \":\" usados para decidir "
+"quais\n"
+"    \t\tos comandos que devem ser gravados na lista de histórico.\n"
+
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Adiciona pastas à pilha.\n"
+"    \n"
+"    Adiciona uma pasta ao topo da pilha de pastas, ou roda a pilha\n"
+"    tornando o novo topo da pilha a actual pasta de trabalho.\n"
+"    Sem argumentos, troca as duas pastas de topo.\n"
+"    \n"
+"    Opções:\n"
+"      -n\tSuprime a alteração normal de pasta ao adicionar\n"
+"    pastas à pilha, para que só a pilha seja manipulada.\n"
+"    \n"
+"    Argumentos:\n"
+"      +N\tRoda a pilha de modo a que a N-ésima pasta (contando\n"
+"    \t\tda esquerda da lista mostrada por \"dirs\", começando por\n"
+"    \t\tzero) fique no topo.\n"
+"    \n"
+"      -N\tRoda a pilha de modo a que a N-ésima pasta (contando\n"
+"    \t\tda direita da lista mostrada por \"dirs\", começando por\n"
+"    \t\tzero) fique no topo.\n"
+"    \n"
+"      dir\tAdiciona DIR à pilha de pastas no topo, tornando-a a\n"
+"    \t\tnova pasta de trabalho actual.\n"
+"    \n"
+"    O interno \"dirs\" mostra a pilha de pastas.\n"
+"    \n"
+"    Estado de saída:\n"
+"    Devolve sucesso a não ser que indique um argumento inválido ou a\n"
+"    troca de pastas falhe."
+
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Remove pastas da pilha.\n"
+"    \n"
+"    Remove entradas da pilha de pastas. Sem argumentos, remove\n"
+"    a pasta do topo da pilha e muda para a nova pasta superior.\n"
+"    \n"
+"     Opções:\n"
+"       -n\tSuprime a alteração normal de pasta ao remover\n"
+"     \t\tpastas da pilha, para que só a pilha seja manipulada.\n"
+"    \n"
+"     Argumentos:\n"
+"       +N\tRemove a N-ésima entrada contando da esquerda da lista\n"
+"    \t\tmostrada por \"dirs\", começando por zero. E.g.: \"popd +0\"\n"
+"    \t\tremove a primeira pasta, \"popd +1\" a segunda.\n"
+"    \n"
+"       -N\tRemove a N-ésima entrada contando da direita da lista\n"
+"    \t\tmostrada por \"dirs\", começando por zero. E.g.: \"popd -0\"\n"
+"    \t\tremove a última pasta, \"popd -1\" a penúltima.\n"
+"    \n"
+"     O interno \"dirs\" mostra a pilha de pastas.\n"
+"    \n"
+"     Estado de saída:\n"
+"     Devolve sucesso a não ser que indique um argumento inválido ou a troca\n"
+"     de pastas falhe."
+
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Mostra a pilha de pastas.\n"
+"    \n"
+"    Mostra a lista de pastas actualmente lembradas. As pastas\n"
+"    entram na lista com o comando \"pushd\"; pode recuar na\n"
+"    lista com o comando \"popd\".\n"
+"    \n"
+"    Opções:\n"
+"      -c\tlimpa a pilha de pastas eliminando todos os elementos\n"
+"      -l\tnão imprime versões prefixadas com til de pastas relativas\n"
+"    \t\tà sua pasta inicial\n"
+"      -p\timprime a pilha de pastas com uma entrada por linha\n"
+"      -v\timprime a pilha de pastas com uma entrada por linha prefixada\n"
+"    \t\tcom a sua posição na pilha\n"
+"    \n"
+"    Argumentos:\n"
+"      +N\tMostra a N-ésima entrada contando da esquerda da lista\n"
+"    \t\tmostrada por \"dirs\" quando chamado sem opções, começando\n"
+"    \t\tpor zero.\n"
+"    \n"
+"      -N\tMostra a N-ésima entrada contando da direita da lista\n"
+"    \t\tmostrada por \"dirs\" quando chamado sem opções, começando\n"
+"    \t\tpor zero.\n"
+"    \n"
+"    Estado de saída:\n"
+"    Devolve sucesso a não ser que indique uma opção inválida ou ocorra um "
+"erro"
+
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"Define e cancela opções de consola.\n"
+"    \n"
+"    Altera a definição de cada opção de consola OPTNOME. Sem qualquer\n"
+"    argumento, lista todas as opções de consola com indicação de definição\n"
+"    ou não de estado.\n"
+"    \n"
+"     Opções:\n"
+"       -o\trestringe OPTNOMEs para os definidos para uso com \"set -o\"\n"
+"       -p\timprime cada opção de consola com indicação do seu estado\n"
+"       -q\tsuprime a saída\n"
+"       -s\tactiva (define) cada OPTNOME\n"
+"       -u\tdesactiva (limpa) cada OPTNOME\n"
+"    \n"
+"    Estado de saída:\n"
+"    Devolve sucesso se OPTNOME estiver activado; falha se indicar uma opção\n"
+"    inválida ou OPTNOME esteja desactivada."
+
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"Formata e imprime ARGUMENTOS sob controlo do FORMATO.\n"
+"    \n"
+"    Opções:\n"
+"      -v var\tatribui a saída à variável de consola VAR em vez de\n"
+"    \t\tmostrar na saída padrão\n"
+"    \n"
+"    FORMATO é uma cadeia de caracteres que contém três tipos de objectos: \n"
+"    caracteres simples, que são simplesmente copiados para a saída padrão;\n"
+"    sequências de escape, que são convertidas e copiadas para a saída "
+"padrão; e\n"
+"    especificações de formato, cada uma das quais causa a impressão do "
+"argumento\n"
+"    sucessivo seguinte.\n"
+"    \n"
+"    Além das especificações de formato padrão descritas em printf (1),\n"
+"    printf interpreta:\n"
+"    \n"
+"      %b\texpande sequências de escape para o argumento correspondente\n"
+"      %q\tcita o argumento de forma a ser reutilizado como entrada de "
+"consola\n"
+"      %(fmt)T\timprime a cadeia de data-hora resultante da utilização do "
+"FMT\n"
+"    \t\tcomo formato para strftime(3)\n"
+"    \n"
+"    O formato é reutilizado conforme necessário para consumir todos os "
+"argumentos.\n"
+"    E se há menos argumentos do que o formato requer, especificações de "
+"formato\n"
+"    extra comportam-se como um valor zero ou uma cadeia nula, conforme "
+"apropriado,\n"
+"    tenha sido fornecido.\n"
+"    \n"
+"    Estado de saída:\n"
+"    Devolve sucesso a não ser que indique uma opção inválida ou ocorra um "
+"erro de\n"
+"    escrita ou atribuição."
+
+#: builtins.c:1971
+#, fuzzy
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Especifica como os argumentos devem ser concluídos por Readline.\n"
+"    \n"
+"    Para cada NOME, especifica como os argumentos devem ser concluídos. Se "
+"não \n"
+"    fornecer opções, as especificações de conclusão existentes são "
+"imprimidas\n"
+"    de forma a permitir que sejam reutilizados como entrada.\n"
+"    \n"
+"    Opções:\n"
+"      -p\timprime especificações de conclusão existentes em formato "
+"reutilizável\n"
+"      -r\tremove uma especificação de conclusão para cada NOME, ou, se não\n"
+"    \t\tforneceu NOMEs, todas as especificações de conclusão\n"
+"      -D\taplica as conclusões e acções como predefinição para comandos\n"
+"     \t\tsem qualquer especificação de conclusão definida\n"
+"      -E\taplica as conclusões e acções a comandos -- \"vazios\"\n"
+"     \t\tconclusão tentada numa linha em branco\n"
+"      -I\taplica as conclusões e acções à palavra inicial (normalmente o\n"
+"    \t\tcomando)\n"
+"    \n"
+"    Quando a conclusão é tentada, as acções são aplicadas na ordem em que \n"
+"    as opções de letras maiúsculas estão listadas acima. Se forem fornecidas "
+"múltiplas\n"
+"    opções, a opção -D toma precedência sobre -E e ambas têm precedência "
+"sobre -I.\n"
+"    \n"
+"    Estado da saída: Devolve sucesso a não ser que seja fornecida uma opção\n"
+"    inválida ou ocorra um erro."
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Mostrar possíveis conclusões, dependendo das opções.\n"
+"    \n"
+"    Destinado a ser usado de dentro de uma função de consola gerando\n"
+"    possíveis conclusões. Se o argumento PALAVRA opcional for fornecido,\n"
+"    são geradas comparações com PALAVRA.\n"
+"    \n"
+"    Estado de saída:\n"
+"    Devolve sucesso a não ser que indique uma opção inválida ou ocorra um "
+"erro."
+
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"Modifica ou mostra as opções de conclusão.\n"
+"    \n"
+"    Modifica as opções de conclusão para cada NOME, ou, se não fornecer "
+"NOME,\n"
+"    a conclusão actualmente em execução. Se nenhuma OPÇÃO for fornecida, "
+"imprime\n"
+"    as opções de conclusão para cada NOME ou a especificação de conclusão "
+"actual.\n"
+"    \n"
+"    Opções:\n"
+"    \t-o opção\tDefine opção de conclusão OPÇÃO para cada NOME\n"
+"    \t-D\t\tAltera opções para a conclusão do comando \"predefinido\"\n"
+"    \t-E\t\tAltera opções para a conclusão do comando \"vazio\"\n"
+"    \t-I\t\tAltera opções para a conclusão na palavra inicial\n"
+"    \n"
+"    Usar \"+ o\" em vez de \"-o\" desliga a opção especificada.\n"
+"    \n"
+"    Argumentos:\n"
+"    \n"
+"    Cada NOME refere-se a um comando para o qual uma especificação de "
+"conclusão\n"
+"    deve ter sido anteriormente definida usando o interno \"complete\". Se "
+"não\n"
+"    forneceu NOMEs, compopt tem de ser chamado por uma função actualmente a\n"
+"    gerar conclusões e as opções para esse gerador de conclusões "
+"actualmente\n"
+"    em execução são modificadas.\n"
+"    \n"
+"    Estado de saída:\n"
+"    Devolve sucesso a não ser que indique uma opção inválida ou NOME não "
+"tenha\n"
+"    uma especificação de conclusão definida."
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"Lê linhas da entrada padrão para uma variável de matriz indexada.\n"
+"    \n"
+"    Lê linhas da entrada padrão para a variável de matriz indexada MATRIZ, "
+"ou\n"
+"    do descritor de ficheiro FD se a opção -u for fornecida. A variável "
+"MAPFILE\n"
+"    é a MATRIZ predefinida.\n"
+"    \n"
+"    Opções:\n"
+"      -d delim\tUsa DELIM para terminar as linhas, em vez de nova linha\n"
+"      -n total\tCopia no máximo TOTAL linhas. Se TOTAL for 0, copia todas\n"
+"      -O origem\tComeça a atribuir a MATRIZ no índice ORIGEM. A predefinição "
+"é 0\n"
+"      -s total\tDescarta as primeiras TOTAL linhas lidas\n"
+"      -t\tRemove um DELIM inicial de cada linha lida (predefinição é nova "
+"linha)\n"
+"      -u fd\tLê linhas do descritor de ficheiro FD em vez da entrada padrão\n"
+"      -C retorno\tAvalia RETORNO cada vez que QUANTUM linhas são lidas\n"
+"      -c quantum\tEspecifica o número de linhas lidas entre cada chamada a\n"
+"    \t\t\tRETORNO\n"
+"    \n"
+"    Argumentos:\n"
+"      ARRAY\tNome de variável de matriz a usar para dados de ficheiro\n"
+"    \n"
+"    Se -C for fornecido sem -c, a quantidade predefinida é 5000. Quando\n"
+"    RETORNO é avaliado, é fornecido o índice do elemento seguinte da\n"
+"    matriz a ser atribuído e a linha a ser atribuída a esse elemento\n"
+"    como argumentos adicionais.\n"
+"    \n"
+"    Se não for fornecido com uma origem explícita, mapfile limpa MATRIZ "
+"antes\n"
+"    de lhe fazer atribuições.\n"
+"    \n"
+"    Estado de saída:\n"
+"    Devolve sucesso a não ser que indique uma opção inválida, MATRIZ seja "
+"só\n"
+"    de leitura ou não seja uma matriz indexada."
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Lê linhas de um ficheiro para uma variável de matriz.\n"
+"     \n"
+"     Um sinónimo para \"mapfile\"."
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "Devolve o contexto da presente chamada a sub-rotina.\n"
+#~ "    \n"
+#~ "    Sem EXPR, devolve "
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process: processo %5ld (%s) na _pipeline"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "Sinal desconhecido #"
diff --git a/po/pt_BR.gmo b/po/pt_BR.gmo
new file mode 100644
index 0000000..cd1093a
--- /dev/null
+++ b/po/pt_BR.gmo
diff --git a/po/pt_BR.po b/po/pt_BR.po
new file mode 100644
index 0000000..919784c
--- /dev/null
+++ b/po/pt_BR.po
@@ -0,0 +1,8636 @@
+# Brazilian Portuguese translation for bash
+# Copyright (C) 2019 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+# Halley Pacheco de Oliveira <halleypo@ig.com.br>, 2002.
+# Rafael Fontenelle <rafaelff@gnome.org>, 2015, 2016, 2018, 2019.
+msgid ""
+msgstr ""
+"Project-Id-Version: bash 5.0\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2019-01-09 15:13-0200\n"
+"Last-Translator: Rafael Fontenelle <rafaelff@gnome.org>\n"
+"Language-Team: Brazilian Portuguese <ldpbr-translation@lists.sourceforge."
+"net>\n"
+"Language: pt_BR\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+"X-Generator: Virtaal 1.0.0-beta1\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "subscrito de array incorreto"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr "%s: removendo o atributo nameref"
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: impossível converter array indexado para associativo"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: chave de array associativo inválida"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: impossível atribuir a índice não numérico"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr "%s: %s: deve usar subscrito ao atribuir um array associativo"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: impossível criar: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr ""
+"bash_execute_unix_command: impossível localizar mapa de teclas para comando"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: primeiro caractere não-espaço em branco não é `\"'"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "sem `%c' de fechamento em %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s faltando separador dois-pontos"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "`%s': impossível desassociar (unbind)"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr "expansão de chaves: impossível alocar memória para %s"
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr "expansão de chaves: falha ao alocar memória para %u elementos"
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr "expansão de chaves: falha ao alocar memória para `%s'"
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "`%s': nome de apelido (alias) inválido"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "edição de linha não habilitada"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "`%s': nome de mapa de teclas inválido"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: impossível ler: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "`%s': nome de função desconhecida"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s não está associada a qualquer tecla.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s pode ser chamado via "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "`%s': impossível desassociar (unbind)"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "número de loops"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "significativo apenas em um loop de `for', `while' ou `until'"
+
+# help caller
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Retorna o contexto da chamada de sub-rotina atual.\n"
+"    \n"
+"    Sem EXPR, retorna \"$linha $arquivo\".  Com EXPR, retorna\n"
+"    \"$linha $sub-rotina $arquivo\"; essa informação extra pode ser usada "
+"para\n"
+"    fornecer um rastro da pilha.\n"
+"    \n"
+"    O valor de EXPR indica quantos quadros de chamada deve voltar antes do\n"
+"    atual; o quadro do topo é o quadro 0.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna 0, a menos que o shell não esteja executando uma função de\n"
+"    shell ou EXPR seja inválida."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "HOME não definida"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "número excessivo de argumentos"
+
+#: builtins/cd.def:342
+msgid "null directory"
+msgstr "diretório nulo"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "OLDPWD não definida"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "linha %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "aviso: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: uso: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: a opção requer um argumento"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: requer argumento numérico"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: não encontrado"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: opção inválida"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: nome de opção inválido"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "`%s': não é um identificador válido"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "número octal inválido"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "número do hexa inválido"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "número inválido"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: especificação de sinal inválida"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr ""
+"`%s': não é um identificador de processo (pid) nem é uma especificação de "
+"trabalho válida"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: a variável permite somente leitura"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s fora dos limites"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "argumento"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s fora dos limites"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: trabalho não existe"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: nenhum controle de trabalho"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "nenhum controle de trabalho"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: restrição"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "restrição"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: não é um comando interno do shell"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "erro de escrita: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "erro ao definir atributos do terminal: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "erro ao obter atributos do terminal: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: erro ao obter o diretório atual: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: especificação de trabalho ambígua"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr "ajuda não disponível nesta versão"
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: impossível remover definição: %s somente-leitura"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: impossível remover definição"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: nome de ação inválido"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: nenhuma especificação de completação"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "aviso: a opção -F pode não funcionar como esperado"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "aviso: a opção -C pode não funcionar como esperado"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "não se está executando atualmente função de completação"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "somente pode ser usado em uma função"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr "%s: variável de referência não pode ser um array"
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr "%s: referência a si próprio da variável nameref não é permitido"
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s referência circular de nome"
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "\"%s\": nome de variável inválido para referência de nome"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "impossível usar `-f' para criar funções"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: função somente para leitura"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr "%s: atribuição de array composto com aspas está obsoleto"
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: impossível destruir variáveis de array desta maneira"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: impossível converter array associativo para indexado"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "carregamento dinâmico não está disponível"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "impossível abrir objeto compartilhado %s: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "impossível localizar %s no objeto compartilhado %s: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: não foi carregado dinamicamente"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr "função de carregamento para %s retorna falha (%d): não foi carregada"
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: não foi carregado dinamicamente"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: impossível excluir: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: é um diretório"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: não é um arquivo irregular"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: arquivo é muito grande"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: impossível executar o arquivo binário"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: impossível executar: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "sair\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "não é um shell de login: use `exit'"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Há trabalhos parados.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Há trabalhos em execução.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "nenhum comando encontrado"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "especificação do histórico"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: impossível abrir arquivo temporário: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "atual"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "o trabalho %d iniciou sem controle de trabalho"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: opção ilegal -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: a opção requer um argumento: -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "hashing está desabilitado"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: tabela de hash está vazia\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "número\tcomando\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Comandos shell correspondendo à palavra-chave `"
+msgstr[1] "Comandos shell correspondendo às palavras-chave `"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"nenhum tópico de ajuda corresponde a `%s'.  Tente `help help' ou `man -k %s' "
+"ou `info %s'."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: impossível abrir: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Esses comandos shell são definidos internamente. Digite `help' para ver "
+"essa\n"
+"lista. Digite `help NOME' para descobrir mais sobre a função `NOME'.\n"
+"Use `info bash' para descobrir mais sobre o shell em geral.\n"
+"Use `man -k' ou `info' para descobrir mais sobre comandos que não estão "
+"nesta\n"
+"lista.\n"
+"\n"
+"Um asterisco (*) próximo ao nome significa que o comando está desabilitado.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "impossível usar mais de um dentre -anrw"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "posição no histórico"
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: marca de tempo inválida"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: expansão do histórico falhou"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: inlib falhou"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "nenhuma outra opção permitida com `-x'"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: argumentos devem ser IDs de trabalhos ou processo"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Erro desconhecido"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "esperava uma expressão"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: não é um array indexado"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: especificação de descritor de arquivo inválida"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: descritor de arquivo inválido: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: número de linhas inválido"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: origem do array inválido"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: quantidade de chamadas inválida"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "nome de variável array vazio"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "requer suporte a variável de array"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "`%s': faltando caractere de formato"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "`%c': especificação de formato de tempo inválida"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "`%c': caractere de formato inválido"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "aviso: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "problema ao analisar formato: %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "faltando dígito hexa para \\x"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "faltando dígito unicode para \\%c"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "nenhum outro diretório"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s argumento inválido"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<nenhum diretório atual>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "pilha de diretórios está vazia"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "índice de pilha de diretórios"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Exibe a lista de diretórios atualmente memorizados. Diretórios são\n"
+"    inseridos na lista por meio do comando `pushd'; você pode obter\n"
+"    de volta da lista com o comando `popd'.\n"
+"    \n"
+"    Opções:\n"
+"      -c\tlimpa a pilha de diretórios excluindo todos os elementos\n"
+"      -l\tnão mostra versões de diretórios prefixadas por til,\n"
+"      \t\trelativos ao seu diretório HOME\n"
+"      -p\texibe a pilha de diretório com uma entrada por linha\n"
+"      -v\texibe a pilha de diretório com uma entrada por linha,\n"
+"      \t\tprefixada com sua posição na pilha\n"
+"    \n"
+"    Argumentos:\n"
+"      +N\tExibe a n-ésima entrada a partir da esquerda da linha\n"
+"      \t\tmostrada por `dirs' chamado sem opções, iniciando com zero.\n"
+"    \n"
+"      -N\tExibe a n-ésima entrada a partir da esquerda da linha\n"
+"      \t\tmostrada por `dirs' chamado sem opções, iniciando com zero."
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Adiciona um diretório ao topo da pilha de diretórios ou movimenta\n"
+"    a pilha, fazendo o novo topo da pilha ser o diretório atual de\n"
+"    trabalho. Com nenhum argumento, efetua troca do topo entre dois\n"
+"    diretórios.\n"
+"    \n"
+"    Opções:\n"
+"      -n\tSuprime a alteração normal de diretório ao adicionar\n"
+"      \t\tdiretórios à pilha, de forma que apenas a pilha é manipulada.\n"
+"    \n"
+"    Argumentos:\n"
+"      +N\tMovimenta a pilha de forma que o n-ésimo diretório (a contar\n"
+"      \t\tda esquerda da lista mostrada por `dirs', iniciando com zero)\n"
+"      \t\testá no topo.\n"
+"    \n"
+"      -N\tMovimenta a pilha de forma que o n-ésimo diretório (a contar\n"
+"      \t\tda direita da lista mostrada por `dirs', iniciando com zero)\n"
+"      \t\testá no topo.\n"
+"    \n"
+"      dir\tAdiciona DIR à pilha de diretórios no topo, fazendo dele o\n"
+"      \t\tnovo diretório de trabalho atual.\n"
+"    \n"
+"     O comando interno `dirs' exibe a pilha de diretórios."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Remove entradas da pilha de diretórios. Com nenhum argumento, remove\n"
+"    o diretório do topo da pilha e altera o novo diretório do topo.\n"
+"    \n"
+"    Opções:\n"
+"      -n\tSuprime a alteração normal de diretório ao remover\n"
+"      \t\tdiretórios da pilha, de forma que apenas a pilha é manipulada.\n"
+"    \n"
+"    Argumentos:\n"
+"      +N\tRemove a n-ésima entrada a contar da esquerda da lista\n"
+"      \t\tmostrada por `dirs', iniciando com zero. Ex.: `popd +0'\n"
+"      \t\tremove o primeiro diretório e `popd +1', o segundo.\n"
+"    \n"
+"      -N\tRemove a n-ésima entrada a contar da direita da lista\n"
+"      \t\tmostrada por `dirs', iniciando com zero. Ex.: `popd +0'\n"
+"      \t\tremove o último diretório e `popd -1', o penúltimo.\n"
+"    \n"
+"    O comando interno `dirs' exibe a pilha de diretório."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: especificação de tempo limite inválida"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "erro de leitura: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr ""
+"possível retornar (`return') apenas de uma função ou script carregado (com "
+"`source')"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr ""
+"impossível simultaneamente remover definição de uma função e uma variável"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: não é uma variável array"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: não é uma função"
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr "%s: impossível exportar"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "número de shift"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr ""
+"impossível simultaneamente definir e remover definição de opções do shell"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: nome de opção de shell inválido"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "requer argumento arquivo"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: arquivo não encontrado"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "impossível suspender"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "impossível suspender um shell de login."
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s está apelidada para `%s'\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s é uma palavra-chave do shell\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s é uma função\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s é um comando interno especial do shell\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s é um comando interno do shell\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s é %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s está na tabela hash (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: argumento limite inválido"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "`%c': comando incorreto"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: impossível obter limite: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "limite"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: impossível modificar limite: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "número octal"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "`%c': operador de modo simbólico inválido"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "`%c': caractere de modo simbólico inválido"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " linha "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "último comando: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Abortando..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr "INFORM: "
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "erro de comando desconhecido"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "tipo de comando incorreto"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "conector incorreto"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "desvio incorreto"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: variável não associada"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr ""
+"\atempo limite de espera excedido aguardando entrada: fim automático da "
+"sessão\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "impossível redirecionar a entrada padrão para /dev/null: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "TIMEFORMAT: `%c': caractere de formato inválido"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr "execute_coproc: coproc [%d:%s] ainda existe"
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "erro de `pipe'"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr "eval: excedido o nível máximo de aninhamento de `eval' (%d)"
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr "%s: excedido o nível máximo de aninhamento de `function' (%d)"
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr "%s: excedido o nível máximo de aninhamento de avaliação (%d)"
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: restrição: não é permitido especificar `/' em nomes de comandos"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: comando não encontrado"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: interpretador incorreto"
+
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: impossível executar o arquivo binário: %s"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "`%s': é um comando interno especial"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "impossível duplicar fd (descritor de arquivo) %d para fd %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "excedido o nível de recursividade da expressão"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "esvaziamento de pilha de recursão"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "erro de sintaxe na expressão"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "tentativa de atribuição para algo que não é uma variável"
+
+#: expr.c:530
+msgid "syntax error in variable assignment"
+msgstr "erro de sintaxe na atribuição de variável"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "divisão por 0"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "erro de programação: token incorreto passado para expassign()"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "esperava `:' para expressão condicional"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "exponente menor que 0"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "esperava identificador após pré-acréscimo ou pré-decréscimo"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "faltando `)'"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "erro de sintaxe: esperava operando"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "erro de sintaxe: operador aritmético inválido"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (token de erro é \"%s\")"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "base aritmética inválida"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: número de linhas inválido"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "valor muito grande para esta base de numeração"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: erro de expressão\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: impossível acessar os diretórios pais (anteriores)"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr ""
+"impossível redefinir modo `nodelay' para o descritor de arquivo (fd) %d"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr ""
+"impossível alocar novo descritor de arquivo (fd) para a entrada do `bash' a "
+"partir do fd %d"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr ""
+"save_bash_input: buffer já existe para o novo descritor de arquivo (fd) %d"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: `pipe' de pgrp"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr ""
+"identificador de processo (pid) %d bifurcado (fork) aparece no trabalho em "
+"execução %d"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "excluindo trabalho parado %d com grupo de processo %ld"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process: pid %5ld (%s) marcado como ainda vivo"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: o identificador do processo (pid) não existe"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Sinal %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Concluído"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Parado"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Parado(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "Executando"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Concluído(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Fim da execução com status %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Status desconhecido"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(imagem do núcleo gravada)"
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (wd: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "`setpgid' filho (%ld para %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: o pid %ld não é um processo filho deste shell"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: Sem registro do processo %ld"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: trabalho %d está parado"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: trabalho não existe"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: o trabalho terminou"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: o trabalho %d já está em plano de fundo"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr "waitchld: ativando WNOHANG para evitar bloqueio indefinido"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s, linha %d: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (imagem do núcleo gravada)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(wd agora: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: getpgrp falhou"
+
+#: jobs.c:4447
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: nenhum controle de trabalho em plano de fundo"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: disciplina da linha"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "impossível definir grupo do processo do terminal (%d)"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "nenhum controle de trabalho neste shell"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: asserção falhou: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d: asserção remendada\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "desconhecido"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: bloco socado em lista livre"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: chamado com argumento de bloco já liberado"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: chamado com argumento de bloco não alocado"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: esvaziamento de pilha detectado; mh_nbytes fora do limite"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: esvaziamento de pilha detectado; mh_nbytes fora do limite"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: tamanhos de porções do início e do fim são diferentes"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: chamado com argumento de bloco não alocado"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc: esvaziamento de pilha detectado; mh_nbytes fora do limite"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc: esvaziamento de pilha detectado; mh_nbytes fora do limite"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: tamanhos de porções do início e do fim são diferentes"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: tabela de `alloc' está cheia com FIND_ALLOC?\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: %p já na tabela como alocado?\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: %p já na tabela como livre?\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "base inválida"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: máquina desconhecida"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: serviço inválido"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: especificação de caminho de rede inválida"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "sem suporte a operações de rede"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: impossível alterar locale (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: impossível alterar locale (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: impossível alterar locale (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: impossível alterar locale (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "Você tem mensagem de correio em $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "Você tem mensagem nova de correio em $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "As mensagens de correio em %s foram lidas\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "erro de sintaxe: requer expressão aritmética"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "erro de sintaxe: `;' inesperado"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "erro de sintaxe: `((%s))'"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: tipo da instrução incorreto %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr ""
+"here-document na linha %d delimitado pelo fim do arquivo (desejava `%s')"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr "make_redirection: instrução de redirecionamento `%d' fora do limite"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+"shell_getc: shell_input_line_size (%zu) excede SIZE_MAX (%lu): linha truncada"
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr "excedido o número máximo de here-document"
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "encontrado EOF inesperado enquanto procurava por `%c' correspondente"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "encontrado EOF inesperado enquanto procurava por `]]'"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "erro de sintaxe na expressão condicional: token inesperado `%s'"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "erro de sintaxe na expressão condicional"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "token inesperado `%s', esperava`)'"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "esperava `)'"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "argumento inesperado `%s' para operador unário condicional"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "argumento inesperado para operador unário condicional"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "token inesperado `%s', esperava operador binário condicional"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "esperava operador binário condicional"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "argumento inesperado `%s' para operador binário condicional"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "argumento inesperado para operador binário condicional"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "token inesperado `%c' em comando condicional"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "token inesperado `%s' em comando condicional"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "token inesperado %d em comando condicional"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "erro de sintaxe próximo ao token inesperado `%s'"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "erro de sintaxe próximo a `%s'"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "erro de sintaxe: fim prematuro do arquivo"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "erro de sintaxe"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Use \"%s\" para sair do shell.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "encontrado EOF inesperado enquanto procurava por `)' correspondente"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "completion: função `%s' não encontrada"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr "programmable_completion: %s: possível loop de nova tentativa"
+
+# COMPSPEC é variável no código fonte, manter sem tradução para português.
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: COMPSPEC NULO"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: conector incorreto `%d'"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: descritor de arquivo inválido"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: ponteiro de arquivo NULO"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != fileno xtrace fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: `%c': caractere de formato inválido"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "descritor de arquivo fora dos limites"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: redirecionamento ambíguo"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: impossível sobrescrever arquivo existente"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: restrição: impossível redirecionar saída"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "impossível criar arquivo temporário para here-document: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: impossível atribuir fd a variável"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "sem suporte a /dev/(tcp|udp)/máquina/porta sem rede"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "erro de redirecionamento: impossível duplicar fd"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "impossível localizar /tmp, por favor crie!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp deve ser um nome de diretório válido"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr "modo de impressão bonita ignorada em shells interativos"
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: opção inválida"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "impossível definir uid para %d: uid efetivo %d"
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "impossível definir gid para %d: gid efetivo %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr "possível iniciar o depurador; modo de depuração desabilitado"
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr "%s: É um diretório"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "Eu não tenho nome!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, versão %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Utilização:\t%s [opção-longa-GNU] [opção] ...\n"
+"\t%s [opção-longa-GNU] [opção] arquivo-de-script ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "opções-longas-GNU:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Opções do shell:\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-ilrsD or -c comando ou -O opção-shopt\t\t(somente para chamada)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s ou -o opção\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+"Digite `%s -c \"help set\"' para mais informações sobre as opções do shell.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr ""
+"Digite `%s -c help' para mais informações sobre os comandos internos do "
+"shell.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "Uso o comando `bashbug' para relatar erros.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr "página do bash: <http://www.gnu.org/software/bash>\n"
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr "Ajuda geral sobre uso de software GNU: <http://www.gnu.org/gethelp/>\n"
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: operação inválida"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Sinal falso"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Hangup"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Interromper"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Sair"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Instrução ilegal"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "BPT Rastreamento/Captura (BPT trace/trap)"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "Instrução ABORT"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "Instrução EMT"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Exceção de ponto flutuante"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Morto (Killed)"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Erro do barramento"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Falha de segmentação"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Chamada incorreta do sistema"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "`Pipe' partido (escrita sem leitura)"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Relógio de alarme"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Terminado"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Condição urgente de Entrada/Saída"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Parado (sinal)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Continuar"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Processo filho parado ou terminado"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Parado (entrada tty)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Parado (saída tty)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "Entrada/Saída pronta"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "Tempo limite de CPU excedido"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "Tamanho limite do arquivo excedido"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Alarme (virtual)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Alarme (perfil)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Janela mudada"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Registro bloqueado (lock)"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Sinal 1 definido pelo usuário"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Sinal 2 definido pelo usuário"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "entrada de dados HFT pendente"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "falha iminente de energia"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "falha iminente do sistema"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "migrar o processo para outra CPU"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "erro de programação"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "modo monitor HFT autorizado"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "modo monitor HFT rescindido"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "a seqüência de som HFT foi completada"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "Requisição de informação"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "Sinal desconhecido #%d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "substituição incorreta: sem `%s' de fechamento em %s"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: impossível atribuir uma lista a um membro de um array"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "impossível criar `pipe' para a substituição do processo"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "impossível criar um processo filho para a substituição do processo"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "impossível abrir `pipe' %s para leitura"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "impossível abrir `pipe' %s para escrita"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "impossível duplicar `pipe' %s como descritor de arquivo (fd) %d"
+
+#: subst.c:6213
+msgid "command substitution: ignored null byte in input"
+msgstr "substituição de comando: byte nulo ignorado na entrada"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "impossível criar um `pipe' para substituição do comando"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "impossível criar um processo filho para substituição do comando"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr ""
+"command_substitute: impossível duplicar o `pipe' como descritor de arquivo "
+"(fd) 1"
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: nome de variável inválido para referência de nome"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: expansão indireta inválida"
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr "%s: nome de variável inválido"
+
+#: subst.c:7256
+#, c-format
+msgid "%s: parameter not set"
+msgstr "%s: parâmetro não inicializado"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: parâmetro nulo ou não inicializado"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: expressão de substring < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: substituição incorreta"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: impossível atribuir desta maneira"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+"versões futuras do shell vão forçar avaliação como um substituto aritmético"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "substituição incorreta: sem \"`\" de fechamento em %s"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "sem correspondência: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "esperava argumento"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: esperava expressão de número inteiro"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "esperava `)'"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "esperava `)', encontrado %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: esperava operador binário"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: esperava operador unário"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "faltando `]'"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "erro de sintaxe: `;' inesperado"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "número de sinal inválido"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr ""
+"manipulador de trap: excedido o nível máximo de manipulador de captura (%d)"
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: valor incorreto em trap_list[%d]: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps: manipulador de sinal é SIG_DFL, enviando novamente %d "
+"(%s) para mim mesmo"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: sinal incorreto %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "erro ao importar a definição da função para `%s'"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "nível do shell (%d) muito grande, redefinindo para 1"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: nenhum contexto de função no atual escopo"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: a variável pode não ter um valor atribuído"
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr "%s: atribuindo inteiro para referência de nome"
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: nenhum contexto de função no escopo atual"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s possui a string de exportação nula"
+
+# exportstr é uma variável no código fonte do bash (arquivo variiables.c)
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "caractere inválido na %d na exportstr para %s"
+
+# exportstr é uma variável no código fonte do bash (arquivo variiables.c)
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "Sem `=' na exportstr para %s"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr "pop_var_context: cabeça de shell_variables não é um contexto de função"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: nenhum contexto em no global_variables"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr ""
+"pop_scope: cabeça de shell_variables não é um escopo de ambiente temporário"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: impossível abrir como ARQUIVO"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: valor inválido para rastrear descritor de arquivo"
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s: valor de compatibilidade fora dos limites"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Copyright (C) 2018 Free Software Foundation, Inc."
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"Licença GPLv3+: GNU GPL versão 3 ou posterior <http://gnu.org/licenses/gpl."
+"html>.\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, versão %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr "Este é um software livre; você é livre para alterar e redistribuí-lo."
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "Há NENHUMA GARANTIA, na extensão permitida pela lei."
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: impossível alocar %lu bytes (%lu bytes alocados)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: impossível alocar %lu bytes"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: impossível alocar %lu bytes (%lu bytes alocados)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: impossível alocar %lu bytes"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [NOME[=VALOR] ... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] NOME [NOME ...]"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpsvPSVX] [-m MAPA-TECLAS] [-f ARQUIVO] [-q NOME] [-u NOME] [-r SEQ-"
+"TECLAS]  [-x SEQ-TECLAS:COMANDO-SHELL] [SEQ-TECLAS:FUNÇÃO-DE-LINHA ou "
+"COMANDO-DE-LINHA]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [COMANDO-INTERNO-SHELL [ARG ...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [EXPR]"
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]] [-@]] [DIR]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] COMANDO [ARG ...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilnrtux] [-p] [NOME[=VALOR] ...]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilnrtux] [-p] NOME[=VALOR] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [OPÇÃO] NOME[=VALOR] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [ARG ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [ARG ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-DnPs] [-f ARQUIVO] [NOME ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [ARG ...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts OPTSTRING NOME [ARG]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a NOME] [COMANDO [ARGUMENTOS ...]] [REDIRECIONAMENTO ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr ""
+"fc [-e EDITOR] [-lnr] [PRIMEIRO] [ÚLTIMO] ou fc -s [ANTIGO=NOVO] [COMANDO]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [ESPEC-JOB]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [ESPEC-JOB ...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p CAMINHO] [-dt] [NOME ...]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [PADRÃO ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d POSIÇÃO] [n] ou history -anrw [ARQUIVO] ou history -ps ARG "
+"[ARG...]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [ESPEC-JOB ...] ou jobs -x COMANDO [ARGS]"
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [ESPEC-JOB ... | pid ...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s SIGSPEC | -n SIGNUM | -SIGSPEC] PID | ESPEC-JOB ... ou kill -l "
+"[SIGSPEC]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let ARG [ARG ...]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a ARRAY] [-d DELIM] [-i TEXTO] [-n NCHARS] [-N NCHARS] [-p "
+"CONFIRMAR ] [-t TEMPO] [-u FD] [NOME ...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [--abefhkmnptuvxBCHP] [-o NOME-OPÇÃO] [--] [ARG ...]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [NOME ...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [NOME[=VALOR] ...] ou export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [NOME[=VALOR] ...] ou readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source ARQUIVO [ARGUMENTOS]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". ARQUIVO [ARGUMENTOS]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [EXPR]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ ARG... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[ARG] ESPEC-SINAL ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-apt] NOME [NOME ...]"
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [LIMITE]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [MODO]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-fn] [ID ...]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [PID ...]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for NOME [in PALAVRAS ...] ; do COMANDOS; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( EXP1; EXP2; EXP3 )); do COMANDOS; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select NOME [in PALAVRAS ... ;] do COMANDOS; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] LINHA-COMANDOS"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case PALAVRA in [PADRÃO [| PADRÃO]...) COMANDOS ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if COMANDOS; then COMANDOS; [ elif COMANDOS; then COMANDOS; ]... [ else "
+"COMANDOS; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while COMANDOS; do COMANDOS; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until COMANDOS; do COMANDOS; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [NOME] COMANDO [REDIRECIONAMENTOS]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function NOME { COMANDOS ; } ou NOME () { COMANDOS ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ COMANDOS ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "ESPEC-JOB [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( EXPRESSÃO ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ EXPRESSÃO ]]"
+
+# Não traduzir "variables", esta é uma opção "builtin" do "bash" que é exibida ao executar "help" e acessível com "help variables".
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "variables - Nomes e significados de algumas variáveis do shell"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | DIR]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [NOME-OPÇÃO ...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v VAR] FORMATO [ARGUMENTOS]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o OPÇÃO] [-A AÇÃO] [-G GLOBAL] [-W "
+"LISTA-PALAVRAS]  [-F FUNÇÃO] [-C COMANDO] [-X FILTRO] [-P PREFIXO] [-S "
+"SUFIXO] [NOME ...]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o OPÇÃO] [-A AÇÃO] [-G GLOBAL] [-W LISTA-"
+"PALAVRAS]  [-F FUNÇÃO] [-C COMANDO] [-X FILTRO] [-P PREFIXO] [-S SUFIXO] "
+"[PALAVRA]"
+
+#: builtins.c:239
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o OPÇÃO] [-DEI] [NOME ...]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-d DELIM] [-n NÚMERO] [-O ORIGEM] [-s NÚMERO] [-t] [-u FD] [-C "
+"CHAMADA] [-c QUANTIDADE] [ARRAY]"
+
+#: builtins.c:244
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-d DELIM] [-n NÚMERO] [-O ORIGEM] [-s NÚMERO] [-t] [-u FD] [-C "
+"CHAMADA] [-c QUANTIDADE] [ARRAY]"
+
+# help alias
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Define ou exibe apelidos (aliases).\n"
+"    \n"
+"    Sem argumentos, `alias' mostra a lista de apelidos no formato usável\n"
+"    `alias NOME=VALOR' na saída padrão.\n"
+"    \n"
+"    Do contrário, um apelido é definido para cada NOME cujo VALOR é dado.\n"
+"    Um espaço ao final em VALOR resulta na próxima palavra ser verificada\n"
+"    por substituição de apelido quando o apelido for expandido.\n"
+"    \n"
+"    Opções:\n"
+"      -p\tmostra todos os apelidos definidos em uma formato usável\n"
+"    \n"
+"    Status de saída:\n"
+"    `alias' retorna verdadeiro, a menos que seja fornecido um NOME para\n"
+"    o qual não se tenha definido um apelido"
+
+# help unalias
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Remove cada NOME da lista de apelidos definidos.\n"
+"    \n"
+"    Opções:\n"
+"      -a\tremove todas as definições de apelidos\n"
+"    \n"
+"    Retorna sucesso, a menos que NOME não seja um apelido existente."
+
+# help bind
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"Define variáveis e associações de teclas para Readline.\n"
+"    \n"
+"    Associa uma sequência de teclas para uma função Readline ou uma macro\n"
+"    ou define uma variável de Readline. A sintaxe de argumento sem opção é\n"
+"    equivalente àquela encontrada em ~/.inputrc, mas deve ser passada como\n"
+"    um argumento singular.\n"
+"    \n"
+"    Opções:\n"
+"      -m  MAPA-TECLAS    Usa MAPA-TECLAS como mapa de teclas para a duração\n"
+"                         deste comando. Nomes de mapa de teclas aceitáveis\n"
+"                         são emacs, emacs-standard, emacs-meta, emacs-ctlx,\n"
+"                         vi, vi-move, vi-command e vi-insert.\n"
+"      -l                 Lista nomes de funções.\n"
+"      -P                 Lista nomes e associações de função.\n"
+"      -p                 Lista funções e associações em uma forma que pode "
+"ser\n"
+"                         usada como entrada.\n"
+"      -S                 Lista sequências de teclas que chamam macros e "
+"seus\n"
+"                         valores\n"
+"      -s                 Lista sequências de teclas que chamam macros e "
+"seus\n"
+"                         valores em uma forma que pode ser usada como "
+"entrada.\n"
+"      -V                 Lista nomes e valores de variáveis\n"
+"      -v                 Lista nomes e valores de variáveis em uma forma "
+"que\n"
+"                         pode ser usada como entrada.\n"
+"      -q  NOME           Consulta sobre quais teclas chamam a função "
+"informada.\n"
+"      -u  NOME           Desassocia todas teclas que estão associadas à "
+"função\n"
+"                         informada.\n"
+"      -r  SEQ-TECLAS     Remove a associação para SEQ-TECLAS.\n"
+"      -f  ARQUIVO        Lê associações de tecla de ARQUIVO.\n"
+"      -x  SEQ-TECLAS:COMANDO-SHELL\n"
+"                         Faz com que COMANDO-SHELL seja executado ao "
+"inserir\n"
+"                         SEQ-TECLAS.\n"
+"      -X                 Lista sequência de teclas associadas com -x e "
+"comandos\n"
+"                         associados em uma forma que pode ser usada como\n"
+"                         entrada.\n"
+"    \n"
+"    Status de saída:\n"
+"    `bind' retorna 0 a mesmo que uma opção desconhecida seja fornecida ou\n"
+"    um erro ocorrer."
+
+# help break
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Sai de loops de for, while ou until.\n"
+"    \n"
+"    Sai de um loop de FOR, WHILE ou UNTIL. Se N for especificado, quebra N \n"
+"    blocos de declaração de loops.\n"
+"    \n"
+"    Status de saída:\n"
+"    O status de saída é 0, a menos que N não seja maior ou igual a 1."
+
+# help continue
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Resume loops de for, while ou until.\n"
+"    \n"
+"    Resume a próxima iteração do bloco de declaração de loop de FOR, WHILE\n"
+"    ou UNTIL.\n"
+"    Se N for especificado, resume o N-ésimo bloco de declaração de loop.\n"
+"    \n"
+"    Status de saída:\n"
+"    O status de saída é 0, a menos que N não seja maior ou igual a 1."
+
+# help builtin
+#: builtins.c:354
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Executa comandos internos (builtin) do shell.\n"
+"    \n"
+"    Executa COMANDO-INTERNO-SHELL com argumentos ARGs sem realizar procura\n"
+"    por comandos. Isso é útil quando você deseja reimplementar um comando\n"
+"    interno como uma função shell, mas precisa executar o comando interno\n"
+"    dentro de uma função.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna o status de saída de COMANDO-INTERNO-SHELL ou falso, se\n"
+"    COMANDO-INTERNO-SHELL não for de fato um comando interno de shell."
+
+# help caller
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Retorna o contexto da chamada de sub-rotina atual.\n"
+"    \n"
+"    Sem EXPR, retorna \"$linha $arquivo\".  Com EXPR, retorna\n"
+"    \"$linha $sub-rotina $arquivo\"; essa informação extra pode ser usada "
+"para\n"
+"    fornecer um rastro da pilha.\n"
+"    \n"
+"    O valor de EXPR indica quantos quadros de chamada deve voltar antes do\n"
+"    atual; o quadro do topo é o quadro 0.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna 0, a menos que o shell não esteja executando uma função de\n"
+"    shell ou EXPR seja inválida."
+
+# help cd
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"Altera o diretório de trabalho do shell.\n"
+"    \n"
+"    Altera o diretório atual para DIR, sendo o padrão de DIR o mesmo valor\n"
+"    da variável HOME.\n"
+"    \n"
+"    A variável CDPATH define o caminho de pesquisa para o diretório "
+"contendo\n"
+"    DIR. Nomes de diretórios alternativos em CDPATH são separados por\n"
+"    dois-pontos (:). Um nome de diretório nulo é o mesmo que o diretório\n"
+"    atual. Se DIR inicia com uma barra (/), então CDPATH não é usada.\n"
+"    \n"
+"    Se o diretório não for encontrado e a opção `cdable_vars` estiver "
+"definida\n"
+"    no shell, a palavra é presumida como sendo o nome de uma variável. Se\n"
+"    tal variável possuir um valor, este valor é usado para DIR.\n"
+"    \n"
+"    Opções:\n"
+"      -L\tforça links simbólicos a serem seguidos: resolver links "
+"simbólicos\n"
+"      \t\tem DIR após processar instâncias de `..'\n"
+"      -P\tusa a estrutura do diretório físico sem seguir links\n"
+"    \t\tsimbólicos: resolve links simbólicos em DIR antes de processar\n"
+"    \t\tinstâncias de `..'\n"
+"      -e\tse a opção -P for fornecida e o diretório de trabalho atual não\n"
+"    \t\tpuder ser determinado com sucesso, sai com um status não-zero\n"
+"      -@\tem sistemas nos quais haja suporte, apresenta um arquivo com\n"
+"    \t\tatributos estendidos como um diretório contendo os atributos de\n"
+"    \t\tarquivo\n"
+"    \n"
+"    O padrão é seguir links simbólicos, como se `-L' tivesse sido "
+"especificada.\n"
+"    `..' é processada removendo o componente de caminho imediatamente "
+"anterior\n"
+"    de volta para uma barra ou para o início de DIR.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna 0, se o diretório tiver sido alterado e se $PWD está definida "
+"com\n"
+"    sucesso quando a opção -P for usada; do contrário, retorna não-zero."
+
+# help pwd
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"Mostra o nome do diretório de trabalho atual.\n"
+"    \n"
+"    Opções:\n"
+"      -L\tmostra o valor de $PWD se ele tiver o nome do diretório de\n"
+"      \t\ttrabalho atual\n"
+"      -P\tmostra o diretório físico, sem quaisquer links simbólicos\n"
+"    \n"
+"    Por padrão, `pwd' se comporta como se a opção `-L' foi especificada.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna 0, a menos que uma opção inválida seja fornecida ou o diretório\n"
+"    atual não possa ser lido."
+
+# help :
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Comando nulo.\n"
+"    \n"
+"    Nenhum efeito; o comando não faz nada.\n"
+"    \n"
+"    Status de saída:\n"
+"    Sempre com sucesso."
+
+# help true
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Retorna um resultado de sucesso.\n"
+"    \n"
+"    Status de saída:\n"
+"    Sempre sucesso."
+
+# help false
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Retorna um resultado de insucesso.\n"
+"    \n"
+"    Status de saída:\n"
+"    Sempre falha."
+
+# help command
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Executa um comando simples ou exibe informação sobre comandos.\n"
+"    \n"
+"    Executa COMANDO com ARG suprimindo a procura por função do shell ou\n"
+"    exibe informação sobre os COMANDOs especificados. Pode ser usado para\n"
+"    chamar comandos no disco quando um função com o mesmo nome existe.\n"
+"    \n"
+"    Opções:\n"
+"      -p\tusa um valor padrão como variável PATH no qual garantidamente\n"
+"      \t\tse encontram todas os utilitários padrão\n"
+"      -v\tmostra uma descrição de COMANDO similar ao comando `type'\n"
+"      -V\tmostra uma descrição detalhada (verboso) para cada COMANDO\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna status de saída de COMANDO ou falha, se COMANDO não for \n"
+"    encontrado."
+
+# help declare
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"Define valores e atributos de variável.\n"
+"    \n"
+"    Declara variáveis e a elas fornece atributos. Se nenhum NOME for "
+"fornecido,\n"
+"    exibe os atributos e valores de todas as variáveis.\n"
+"    \n"
+"    Opções:\n"
+"      -f\trestringe ação ou exibição dos nomes e definições de funções\n"
+"      -F\trestringe exibição a nomes de função apenas (mais número de linha\n"
+"      \t\te arquivo fonte, na depuração)\n"
+"      -g\tcria variáveis globais quando usado em uma função do shell;\n"
+"      \t\tdo contrário, ignorado\n"
+"      -p\texibe os atributos e valores de cada NOME\n"
+"    \n"
+"    Opções que definem atributos:\n"
+"      -a\tpara fazer NOMEs serem arrrays indexados (se houver suporte)\n"
+"      -A\tpara fazer NOMEs serem arrrays associativos (se houver suporte)\n"
+"      -i\tpara fazer NOMEs terem o atributo `integer'\n"
+"      -l\tpara converter o valor de cada NOME para minúsculo em sua "
+"atribuição\n"
+"      -n\tfazer de NOME uma referência à variável chamada por seu valor\n"
+"      -r\tpara fazer de NOMEs somente-leitura\n"
+"      -t\tpara fazer NOMEs terem o atributo `trace'\n"
+"      -u\tpara converter o valor de cada NOME para maiúsculo em sua "
+"atribuição\n"
+"      -x\tpra fazer NOMEs exportar\n"
+"    \n"
+"    Usar `+' ao invés de `-' desliga o atributo dado.\n"
+"    \n"
+"    Variáveis com o atributo `integer' têm sua avaliação aritmética (veja o\n"
+"    comando `let') realizada quando é atribuído um valor à variável.\n"
+"    \n"
+"    Quando usado em uma função, `declare' torna NOMEs local, da mesma forma\n"
+"    que o comando `local'. A opção `-g' suprime este comportamento.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que uma opção inválida tenha sido fornecida ou\n"
+"    ocorrer um erro de atribuição de variável."
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"Define valores e atributos de variável.\n"
+"    \n"
+"    Um sinônimo para `declare'. Veja `help declare'."
+
+# help local
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Define variáveis locais.\n"
+"    \n"
+"    Cria uma variável local chamada NOME e lhe dá VALOR. OPÇÃO pode ser\n"
+"    qualquer opção aceita pelo `declare'.\n"
+"    \n"
+"    Variáveis locais podem ser usadas apenas em uma função; elas são "
+"visíveis\n"
+"    apenas para a função na qual elas foram definidas, bem como para seus\n"
+"    filhos.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que uma opção inválida seja fornecida, ocorrer\n"
+"    um erro de atribuição de uma variável ou o shell não estiver executando\n"
+"    uma função."
+
+# help echo
+#: builtins.c:557
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Escreve argumentos para a saída padrão.\n"
+"    \n"
+"    Exibe os ARGs, separados por um único caractere de espaço e seguido\n"
+"    por uma nova linha, na saída padrão.\n"
+"    \n"
+"    Opções:\n"
+"      -n\tnão anexa uma nova linha\n"
+"      -e\thabilita interpretação de escapes de contrabarra a seguir\n"
+"      -E\texplicitação suprime interpretação de escapes de contrabarra\n"
+"    \n"
+"    `echo' interpreta os caracteres escapados por contrabarra:\n"
+"      \\a\talerta (bipe)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuprime futuras saídas\n"
+"      \\e\tcaractere de escape\n"
+"      \\E\tcaractere de escape\n"
+"      \\f\talimentação de formulário (form feed)\n"
+"      \\n\tnova linha\n"
+"      \\r\tretorno de carro (carrier return)\n"
+"      \\t\tTAB horizontal\n"
+"      \\v\tTAB vertical\n"
+"      \\\\\tcontrabarra\n"
+"      \\0nnn\to caractere cujo código ASCII é NNN (octal).  NNN pode\n"
+"      \t\tter 0 a 3 dígitos octais\n"
+"      \\xHH\to caractere de 8 bits cujo valor é HH (hexadecimal).  HH\n"
+"      \t\tpode ter um ou dois dígitos hexa\n"
+"      \\uHHHH\to caractere Unicode cujo valor é o valor hexadecimal HHHH.\n"
+"    \t\tHHHH pode ter um a quatro dígitos hexa.\n"
+"      \\UHHHHHHHH o caractere Unicode cujo valor é o valor hexadecimal\n"
+"    \t\tHHHHHHHH. HHHHHHHH pode ter um a oito dígitos hexa.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que ocorra um erro de escrita."
+
+# help echo
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Escreve argumentos para a saída padrão.\n"
+"    \n"
+"    Exibe os ARGs na saída padrão seguido por uma nova linha.\n"
+"    \n"
+"    Opções:\n"
+"      -n\tnão anexa uma nova linha\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que ocorra um erro de escrita."
+
+# help enable
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"Habilita e desabilita comandos internos do shell.\n"
+"    \n"
+"    Habilita e desabilita comandos internos do shell. Desabilitar\n"
+"    permite que você executa um comando do disco que possui o mesmo\n"
+"    nome que um outro comando interno sem usar um caminho completo.\n"
+"    \n"
+"    Opções:\n"
+"      -a\tmostra uma lista de comandos internos mostrando se cada\n"
+"      \t\tum está habilitado\n"
+"      -n\tdesabilita cada NOME ou exibe uma lista de comandos\n"
+"      \t\tinternos desabilitados\n"
+"      -p\texibe a lista de comandos internos em um formato usável\n"
+"      -s\texibe apenas nomes dos comandos internos 'especial' Posix\n"
+"    \n"
+"    Opções de controle de carregamento dinâmico:\n"
+"      -f\tcarrega comando interno NOME do objeto compartilhado ARQUIVO\n"
+"      -d\tremove um comando interno carregado com -f\n"
+"    \n"
+"    Não sendo informado uma opção, cada NOME é habilitado.\n"
+"    \n"
+"    Para usar o `test' encontrado em $PATH, ao invés da versão de comando\n"
+"    interno do shell, digite `enable -n test'.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que NOME não seja um comando interno de shell\n"
+"    ou ocorrer um erro."
+
+# help eval
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Executa argumentos como um comando de shell.\n"
+"    \n"
+"    Combina ARGs em uma única string, usa o resultado como entrada para o\n"
+"    shell, e executa os comandos resultantes.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna status de saída do comando ou sucesso, se o comando for nulo."
+
+# help getopts
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"Analisa argumentos de opções.\n"
+"    \n"
+"    Getopts é usado pelos procedimentos do shell para analisar parâmetros\n"
+"    posicionais como opções.\n"
+"    \n"
+"    OPÇÕES é uma string que contém as letras de opções a ser reconhecidas;\n"
+"    se uma letra é seguida por dois-pontos, é esperado que a opção tenha\n"
+"    um argumento, o que deveria ser separado dela por um espaço em branco.\n"
+"    \n"
+"    A cada vez que ele é chamado, getopts coloca a próxima opção\n"
+"    na variável shell $NOME, inicializando NOME se ela não existir,\n"
+"    e o índice do próximo argumento a ser processado para dentro da\n"
+"    variável OPTIND. OPTIND é inicializado para 1 a cada vez que o\n"
+"    shell ou um script shell é chamado. Quando uma opção requer\n"
+"    um argumento, getopts coloca aquele argumento em uma variável\n"
+"    shell chamada OPTARG.\n"
+"    \n"
+"    getopts relata erros em um de duas formas. Se o primeiro caractere\n"
+"    de OPÇÕES for caractere dois-pontos, getopts usa sistema silencioso de\n"
+"    relatório de erro. Neste modo, nenhuma mensagem de erro é mostrada.\n"
+"    Se uma opção inválida é vista, getopts coloca o caractere de opção\n"
+"    encontrada dentro do OPTARG. Se um argumento obrigatório não for\n"
+"    encontrado, getopts coloca um ':' em NOME e define OPTARG para o\n"
+"    caractere de opção encontrada. Se getopts não estiver no modo\n"
+"    silencioso, uma opção inválida é vista, getopts coloca um '?' em\n"
+"    NOME e remove definição de OPTARG. Se um argumento obrigatório não for\n"
+"    encontrado, um '?' é colocado em NOME, OPTARG tem sua definição "
+"removida\n"
+"    e uma mensagem de diagnóstico é mostrada.\n"
+"    \n"
+"    Se a variável shell OPTERR possuir o valor 0, getopts desabilita a\n"
+"    exibição de mensagens de erro, mesmo se o primeiro caractere de\n"
+"    OPÇÕES não for dois-pontos.  OPTERR tem o valor por padrão.\n"
+"    \n"
+"    Getopts normalmente analisa os parâmetros posicionais ($0 - $9), mas se\n"
+"    mais argumentos forem fornecidos, eles serão analisados.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, se uma opção for encontrada; falha se o fim das opções\n"
+"    for encontrado ou ocorrer um erro."
+
+# help exec
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"Substitui o shell com o comando fornecido.\n"
+"    \n"
+"    Executa COMANDO, substituindo o shell com o programa especificado.\n"
+"    ARGUMENTOS se tornam os argumentos para COMANDO. Se COMANDO não for\n"
+"    especificado, quaisquer redirecionamentos surtem efeito no shell\n"
+"    atual.\n"
+"    \n"
+"    Opções:\n"
+"      -a NOME\tpassa NOME como argumento zero para COMANDO\n"
+"      -c\texecuta COMANDO com um ambiente vazio\n"
+"      -l\tcoloca um traço no argumento zero para COMANDO\n"
+"    \n"
+"    Se o comando não puder ser executado, um shell não-interativo sai,\n"
+"    a menos que a opção `execfail' esteja definida.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que COMANDO não seja encontrado ou ocorrer um\n"
+"    erro no redirecionamento."
+
+# help exit
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Sai do shell.\n"
+"    \n"
+"    Sai do shell com status igual a N.  Se N for omitido, o status\n"
+"    de saída é o mesmo do último comando executado."
+
+# help exit
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Sai de um shell de login.\n"
+"    \n"
+"    Sai de um shell de login com o status de saída N. Retorna um erro\n"
+"    se não for executada em um shell de login."
+
+# help fc
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"Exibe ou executa comandos da lista do histórico.\n"
+"    \n"
+"    fc é usado para listar ou editar e re-executar comandos da lista de\n"
+"    histórico. PRIMEIRO e ÚLTIMO podem ser números especificando o "
+"intervalo\n"
+"    ou PRIMEIRO pode ser uma string, o que significa o comando mais recente\n"
+"    iniciando com aquela string.\n"
+"    \n"
+"    Opções:\n"
+"      -e EDITOR\tseleciona qual editor usar. O padrão é FCEDIT,\n"
+"      \t\t\tentão EDITOR, então vi\n"
+"      -l\t\tlista linhas ao invés de editar\n"
+"      -n\t\tomite números de linhas ao listar\n"
+"      -r\t\tordem reversa de linhas (mais novos listados primeiro)\n"
+"    \n"
+"    Com o formato `fc -s [ANTIGO=NOVO ...] [COMANDO]', COMANDO é\n"
+"    re-executado após a substituição ANTIGO=NOVO ser realizada.\n"
+"    \n"
+"    Um apelido útil para usar isso é r='fc -s', de forma que digitar `r cc'\n"
+"    executa o último comando iniciando com `cc' e digitar `r' re-executa\n"
+"    o último comando.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso ou status do comando executado; ocorrendo um erro,\n"
+"    retorna não-zero."
+
+# help fg
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Move um trabalho para o primeiro plano.\n"
+"    \n"
+"    Coloca o trabalho identificado por ESPEC-JOB em primeiro plano,\n"
+"    tornando o trabalho atual. Se ESPEC-JOB não estiver presente,\n"
+"    a noção do shell de trabalho atual é usada.\n"
+"    \n"
+"    Status de saída:\n"
+"    Status do comando colocado em primeiro plano ou falha, se ocorrer um "
+"erro."
+
+# help bg
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Move trabalhos para o plano de fundo.\n"
+"\n"
+"    Coloca os trabalhos identificados por ESPEC-JOB em plano de fundo,\n"
+"    como se eles tivessem sido iniciado com `&'. Se ESPEC-JOB não\n"
+"    estiver presente, a noção do shell de trabalho atual é usada.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que controle de trabalho não esteja\n"
+"    habilitado ou ocorra um erro."
+
+# help hash
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"Memoriza ou exibe localizações de programas.\n"
+"    \n"
+"    Determina e memoriza do caminho completo de cada comando NOME. Se "
+"nenhum\n"
+"    argumento for fornecido, exibe informação sobre comandos memorizados.\n"
+"    \n"
+"    Opções:\n"
+"      -d\t\tesquece a localização memorizada de cada NOME\n"
+"      -l\t\texibe em um formato que pode ser usado como entrada\n"
+"      -p CAMINHO\tusa CAMINHO como o caminho completo de NOME\n"
+"      -r\t\tesquece de todas as localizações memorizadas\n"
+"      -t\t\tmostra a localização memorizada de cada NOME, iniciando\n"
+"      \t\t\tcada localização com o NOME correspondente, se múltiplos\n"
+"      \t\t\tNOMEs forem fornecidos\n"
+"    Argumentos:\n"
+"      NOME\t\tCada NOME é pesquisado em $PATH e adicionado à lista de\n"
+"      \t\t\tcomandos memorizados.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que NOME não seja encontrado ou uma opção\n"
+"    inválida seja fornecida."
+
+# help help
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Exibe informação sobre comandos internos (builtin).\n"
+"    \n"
+"    Exibe resumos de comandos internos. Se PADRÃO for especificado,\n"
+"    fornece ajuda detalhada sobre todos os comandos correspondendo\n"
+"    a PADRÃO; do contrário, a lista de tópicos de ajuda é mostrada.\n"
+"    \n"
+"    Opções:\n"
+"      -d\texibe uma descrição breve para cada tópico\n"
+"      -m\texibe o uso em formato pseudo-manpage\n"
+"      -s\texibe apenas uma breve sinopse de uso para cada tópico\n"
+"      \t\tcorrespondendo a PADRÃO\n"
+"    \n"
+"    Argumentos:\n"
+"      PADRÃO\tPadrão especificando um tópico de ajuda\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que PADRÃO não seja encontrado ou uma opção\n"
+"    inválida seja fornecida."
+
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Exibe ou manipula a lista de histórico.\n"
+"    \n"
+"    Exibe a lista de histórico com números de linhas, prefixando cada\n"
+"    entrada modificada com um `*'.  Um argumento de N lista apenas as\n"
+"    últimas N entradas.\n"
+"    \n"
+"    Opções:\n"
+"      -c\t\tlimpa a lista de histórico ao excluir todas as entradas\n"
+"      -d POSIÇÃO\texclui a entrada de histórico na posição POSIÇÃO. "
+"Posições\n"
+"\t\t\tnegativas contam a partir do fim da lista de histórico\n"
+"    \n"
+"      -a\t\tanexa linhas de histórico desta sessão no arquivo de\n"
+"      \t\t\thistórico\n"
+"      -n\t\tlê todas as linhas de histórico ainda não lidas do\n"
+"      \t\t\tarquivo de histórico e anexa-os à lista de histórico\n"
+"      -r\t\tlê o histórico e anexa os conteúdos à lista de histórico\n"
+"      -w\t\tescreve o histórico atual para o arquivo de histórico\n"
+"    \n"
+"      -p\t\texecuta expansão de histórico em cada ARG e exibe o\n"
+"      \t\t\tresultado sem armazená-lo na lista de histórico\n"
+"      -s\t\tanexa os ARGs à lista de histórico como uma única entrada\n"
+"    \n"
+"    Se ARQUIVO for fornecido, ele é usado como o arquivo de histórico.\n"
+"    Do contrário, se a variável HISTFILE tiver um valor, este será usado;\n"
+"    senão, usa de ~/.bash_history.\n"
+"    \n"
+"    Se a variável HISTTIMEFORMAT for definida e não for nula, seu valor é\n"
+"    usado como uma string de formato para strftime(3) para mostrar a marca\n"
+"    de tempo associada com cada entrada de histórico exibida. Do contrário,\n"
+"    nenhuma marca de tempo é mostrada.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que uma opção inválida seja fornecida ou\n"
+"    ocorra um erro."
+
+# help jobs
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"Exibe status de trabalhos.\n"
+"    \n"
+"    Lista os trabalhos ativos. ESPEC-JOB restringe a saída àquele trabalho.\n"
+"    Não sendo informado qualquer opção, o status de todos os trabalhos\n"
+"    ativos é exibido.\n"
+"    \n"
+"    Opções:\n"
+"      -l\tlista IDs de processo junto com a informação normal\n"
+"      -n\tlista apenas processos que tiverem seu status alterado desde\n"
+"      \t\ta última notificação\n"
+"      -p\tlista apenas IDs de processo\n"
+"      -r\trestringe a saída apenas a trabalhos em execução\n"
+"      -s\trestringe a saída apenas a trabalhos parados\n"
+"    \n"
+"    Se -x for fornecido, COMANDO é executado após as demais especificações\n"
+"    de trabalho que aparecerem em ARGs terem sido substituídas com o ID de\n"
+"    processo daquele líder de grupo de processos do trabalhos.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que uma opção inválida seja fornecida ou\n"
+"    ocorra um erro. Se -x for usado, retorna o status de saída do COMANDO."
+
+# help disown
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"Remove trabalhos do shell atual.\n"
+"    \n"
+"    Remove cada argumento ESPEC-JOB da tabela de trabalhos ativos. Sem\n"
+"    qualquer ESPEC-JOB, o shell usa sua noção de trabalho atual.\n"
+"    \n"
+"    Opções:\n"
+"      -a\tremove todos os trabalhos se ESPEC-JOB não for fornecido\n"
+"      -h\tmarca cada ESPEC-JOB, de forma que SIGHUP não seja fornecido\n"
+"      \t\tao trabalho, caso o shell receba um SIGHUP\n"
+"      -r\tremove apenas trabalhos em execução\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que uma opção inválida ou ESPEC-JOB inválido\n"
+"    sejam fornecidos."
+
+# help kill
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Envia um sinal para um trabalho.\n"
+"\n"
+"    Envia aos processos identificados pelo PID ou pelo ESPEC-JOB o sinal\n"
+"    informado por SIGSPEC ou SIGNUM. Se SIGSPEC e SIGNUM\n"
+"    não estiverem presentes, então, SIGTERM é presumido.\n"
+"    \n"
+"    Opções:\n"
+"      -s SIGSPEC\tSIGSPEC especifica o nome do sinal\n"
+"      -n SIGNUM\t\tSIGNUM representa um número de sinal\n"
+"      -l\t\t\tlista os nomes dos sinais; se `-l' for acompanhado por\n"
+"      \t\t\t\toutros argumentos, presume-se estes sejam números de\n"
+"      \t\t\t\tsinais para os quais nomes deveriam ser listados\n"
+"      -L\t\t\tsinônimo de -l\n"
+"    \n"
+"    `Kill' é um comando interno do shell por duas razões: ele permite\n"
+"    IDs de trabalho serem usados ao invés de IDs de processo e permite\n"
+"    que processos sejam matados caso o limite de processos que você pode\n"
+"    criar seja atingido.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que uma opção inválida seja fornecida ou\n"
+"    ocorra um erro."
+
+# help let
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"Avalia expressões aritméticas.\n"
+"    \n"
+"    Avalia cada ARG como uma expressão aritmética. A avaliação é feita\n"
+"    em inteiros com largura fixa com nenhuma verificação de estouro de\n"
+"    pilha. A lista de operadores a seguir está agrupada em níveis de\n"
+"    operadores de igual precedência. Os níveis estão listados em ordem\n"
+"    de precedência decrescente.\n"
+"    \n"
+"    \tid++, id--          pós-acréscimo, pós-decréscimo de variável\n"
+"    \t++id, --id          pré-acréscimo, pré-decréscimo de variável\n"
+"    \t-, +                menos, mais unário\n"
+"    \t!, ~                negação lógica e bit-a-bit\n"
+"    \t**                  exponenciação\n"
+"    \t*, /, %             multiplicação, divisão, resto de divisão\n"
+"    \t+, -                adição, subtração\n"
+"    \t<<, >>              deslocamento bit-a-bit para esquerda, direita\n"
+"    \t<=, >=, <, >        comparação\n"
+"    \t==, !=              igualdade, desigualdade\n"
+"    \t&                   E (AND) bit-a-bit\n"
+"    \t^                   OU eXclusivo (XOR) bit-a-bit\n"
+"    \t|                   OU (OR) bit-a-bit\n"
+"    \t&&                  E lógico\n"
+"    \t||                  OU lógico\n"
+"    \texpr ? expr : expr  operador condicional\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=          atribuição\n"
+"    \n"
+"    As variáveis de shell são permitidas como operandos. O nome da\n"
+"    variável é substituída pelo seu valor (coagida a um inteiro com\n"
+"    largura fixa) dentro de uma expressão. A variável não precisa ter\n"
+"    seu atributo de `inteiro' ligado para ser usada em uma expressão.\n"
+"   \n"
+"    Operadores são avaliados em ordem de precedência. Sub-expressões em\n"
+"    parênteses são avaliados primeiro e podem sobrescrever as regras de\n"
+"    precedência acima.\n"
+"    \n"
+"    Status de saída:\n"
+"    Se o último ARG for avaliado como 0, let retorna 1; do contrário,\n"
+"    let retorna 0."
+
+# help read
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"Lê uma linha da entrada padrão e separa em campos.\n"
+"\n"
+"    Lê uma linha da entrada padrão ou do descritor de arquivo FD, caso a\n"
+"    opção -u seja fornecida. A linha é separada em campos, na mesma forma "
+"de\n"
+"    separação de palavras, e a primeira palavra é atribuída ao primeiro "
+"NOME,\n"
+"    o segundo ao segundo NOME e por aí vai, com qualquer palavras restantes\n"
+"    atribuídas para o último NOME. Apenas os caracteres encontrados em $IFS\n"
+"    são reconhecidos como delimitadores de palavras.\n"
+"    \n"
+"    Se nenhum NOME for fornecido, a linha lida é armazenada na variável\n"
+"    REPLY (resposta).\n"
+"    \n"
+"    Opções:\n"
+"      -a ARRAY      atribui as palavras lidas a índices sequenciais da\n"
+"                    variável array ARRAY, iniciando em zero\n"
+"      -d DELIM      continua até o primeiro caractere de DELIM ser lido, ao\n"
+"                    invés de nova linha\n"
+"      -e            usa Readline para obter a linha\n"
+"      -i TEXTO      usa TEXTO como o texto inicial para Readline\n"
+"      -n NCHARS     retorna após ler NCHARS caracteres, ao invés de esperar\n"
+"                    por uma nova linha, mas respeita um delimitador se "
+"número\n"
+"                    de caracteres menor que NCHARS sejam lidos antes do\n"
+"                    delimitador\n"
+"      -N NCHARS     retorna apenas após ler exatamente NCHARS caracteres, a\n"
+"                    menos que EOF (fim do arquivo) seja encontrado ou "
+"`read'\n"
+"                    esgote o tempo limite, ignorando qualquer delimitador\n"
+"      -p CONFIRMAR  mostra a string PROMPT sem remover nova linha antes de\n"
+"                    tentar ler\n"
+"      -r            não mostra barra invertida para escapar quaisquer\n"
+"                    caracteres\n"
+"      -s            não ecoa entrada vindo de um terminal\n"
+"      -t TEMPO      esgota-se o tempo limite e retorna falha, caso uma toda\n"
+"                    uma linha não seja lida em TEMPO segundos. O valor da\n"
+"                    variável TMOUT é o tempo limite padrão. TEMPO pode ser "
+"um\n"
+"                    número fracionado. SE TEMPO for 0, `read' retorna "
+"sucesso\n"
+"                    apenas se a entrada estiver disponível no descritor de\n"
+"                    arquivo especificado. O status de saída é maior que "
+"128,\n"
+"                    se o tempo limite for excedido\n"
+"      -u FD         lê do descritor de arquivo FD, ao invés da entrada "
+"padrão\n"
+"    \n"
+"    Status de saída:\n"
+"    O código de retorno é zero, a menos que o EOF (fim do arquivo) seja\n"
+"    encontrado, `read' esgote o tempo limite (caso em que o código de "
+"retorno\n"
+"    será 128), ocorra erro de atribuição de uma variável ou um descritor de\n"
+"    arquivo inválido seja fornecido como argumento para -u."
+
+# help return
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"Retorna de uma função de shell.\n"
+"    \n"
+"    Causa uma função ou script carregado (source) a sair retornando o valor\n"
+"    especificado por N. Se N for omitido, o status de retorno é do último\n"
+"    comando executado dentro da função ou script.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna N ou falha se o shell não estiver executando uma função ou\n"
+"    script."
+
+# help set
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"Define ou remove definição de valores das opções e dos parâmetros "
+"posicionais\n"
+"do shell:\n"
+"    \n"
+"    Altera o valor de opções e de parâmetros posicionais do shell ou mostra\n"
+"    os nomes ou valores de variáveis shell.\n"
+"    \n"
+"    Opções:\n"
+"      -a  Marca variáveis, que foram modificadas ou criadas, para "
+"exportação.\n"
+"      -b  Notifica sobre terminação de trabalho imediatamente.\n"
+"      -e  Sai imediatamente se um comando sai com um status não-zero.\n"
+"      -f  Desabilita a geração de nome de arquivo (\"globbing\").\n"
+"      -h  Memoriza a localização de comandos à medida em que são "
+"procurados.\n"
+"      -k  Todos argumentos de atribuição são colocados no ambiente para um\n"
+"          comando, e não apenas aqueles que precedem o nome do comando.\n"
+"      -m  Controle de trabalho está habilitado.\n"
+"      -n  Lê comandos, mas não os executa.\n"
+"      -o NOME-OPÇÃO\n"
+"          Define a variável correspondendo a NOME-OPÇÃO:\n"
+"              allexport    mesmo que -a\n"
+"              braceexpand  mesmo que -B\n"
+"              emacs        usa interface de edição de linha estilo Emacs\n"
+"              errexit      mesmo que -e\n"
+"              errtrace     mesmo que -E\n"
+"              functrace    mesmo que -T\n"
+"              hashall      mesmo que -h\n"
+"              histexpand   mesmo que -H\n"
+"              history      habilita histórico de comandos\n"
+"              ignoreeof    shell não vai sair após leitura de EOF\n"
+"              interactive-comments\n"
+"                           permite mostrar comentários em comandos "
+"interativos\n"
+"              keyword      mesmo que -k\n"
+"              monitor      mesmo que -m\n"
+"              noclobber    mesmo que -C\n"
+"              noexec       mesmo que -n\n"
+"              noglob       mesmo que -f\n"
+"              nolog        atualmente aceito, mas ignorado\n"
+"              notify       mesmo que -b\n"
+"              nounset      mesmo que -u\n"
+"              onecmd       mesmo que -t\n"
+"              physical     mesmo que -P\n"
+"              pipefail     o valor de retorno de uma linha de comandos é o\n"
+"                           status do último comando a sair com status não-"
+"zero,\n"
+"                           ou zero se nenhum comando saiu com status não "
+"zero\n"
+"              posix        altera o comportamento do bash, onde a operação\n"
+"                           padrão diverge dos padrões do Posix para\n"
+"                           corresponder a estes padrões\n"
+"              privileged   mesmo que -p\n"
+"              verbose      mesmo que -v\n"
+"              vi           usa interface de edição de linha estilo vi\n"
+"              xtrace       mesmo que -x\n"
+"      -p  Ligado sempre que IDs de usuário real e efetivo não "
+"corresponderem.\n"
+"          Desabilita processamento do arquivo $ENV e importação de funções "
+"da\n"
+"          shell. Ao desligar essa opção, causa o uid e o gid efetivo serem\n"
+"          os uid e gid reais.\n"
+"      -t  Sai após a leitura e execução de um comando.\n"
+"      -u  Trata limpeza (unset) de variáveis como um erro quando "
+"substituindo.\n"
+"      -v  Mostra linhas de entrada do shell na medida em que forem lidas.\n"
+"      -x  Mostra comandos e seus argumentos na medida em que forme "
+"executados.\n"
+"      -B  o shell vai realizar expansão de chaves\n"
+"      -C  Se definido, não permite arquivos normais existentes serem\n"
+"          sobrescritos por redirecionamento da saída.\n"
+"      -E  Se definido, a armadilha ERR é herdada por funções do shell.\n"
+"      -H  Habilita substituição de histórico estilo \"!\". Essa sinalização "
+"está\n"
+"          habilitada por padrão quando  shell é interativa.\n"
+"      -P  Se definida, não resolve links simbólicos ao sair de comandos, "
+"tais\n"
+"          como `cd' (que altera o diretório atual).\n"
+"      -T  Se definido, a armadilha DEBUG e RETURN são herdadas por funções "
+"do shell.\n"
+"      --  Atribui quaisquer argumentos restantes aos parâmetros "
+"posicionais.\n"
+"          Se não houver argumentos restantes, os parâmetros posicionais são\n"
+"          limpos (unset).\n"
+"      -   Atribui quaisquer argumentos restantes aos parâmetros "
+"posicionais.\n"
+"          As opções -x e -v são desligadas.\n"
+"    \n"
+"    Usar +, ao invés de -, causa essas sinalizações serem desligadas. As\n"
+"    sinalizações também podem ser usadas por meio de chamada do shell. As\n"
+"    sinalizações atualmente definidas podem ser encontradas em $-. Os n "
+"ARGs\n"
+"    restantes são parâmetros posicionais e são atribuídos, em ordem, a $1, "
+"$2,\n"
+"    .. $n. Se nenhuma ARG for fornecido, todas as variáveis shell são\n"
+"    mostradas.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que uma opção inválida seja fornecida."
+
+# help unset
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"Remove valores e atributos de variáveis e funções do shell.\n"
+"    \n"
+"    Para cada NOME, remove a variável ou função correspondente.\n"
+"    \n"
+"    Opções:\n"
+"      -f    trata cada NOME como uma função de shell\n"
+"      -v    trata cada NOME como uma variável de shell\n"
+"      -n    trata cada NOME como um nome referência e remove o valor em si\n"
+"            ao invés da variável a qual ele se refere\n"
+"    \n"
+"    Se opções, `unset' primeiro tenta remover uma variável e, se falhar,\n"
+"    tenta remover uma função.\n"
+"    \n"
+"    Algumas variáveis não podem ser removida; veja também `readonly'.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que uma opção inválida seja fornecida ou\n"
+"    um NOME seja somente-leitura."
+
+# help export
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Define atributo de exportação para variáveis shell.\n"
+"    \n"
+"    Marca cada NOME para exportação automática para o ambiente dos comandos\n"
+"    executados subsequentemente. Se VALOR for fornecido, atribui VALOR "
+"antes\n"
+"    de exportar.\n"
+"    \n"
+"    Opções:\n"
+"      -f\tfaz referência a funções do shell\n"
+"      -n\tremove a propriedade de exportação para cada NOME\n"
+"      -p\texibe uma lista de todas as variáveis e funções exportadas\n"
+"    \n"
+"    Um argumento de `--' desabilita processamento de opções posteriores.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que uma opção inválida seja fornecida ou\n"
+"    NOME seja inválido."
+
+# help readonly
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Marca variáveis shell como inalteráveis.\n"
+"    \n"
+"    Marca cada NOME como somente-leitura; os valores desses NOMEs pode não\n"
+"    ser alterados por atribuídos subsequentes. Se VALOR for fornecido,\n"
+"    atribui VALOR antes de marcar como somente-leitura.\n"
+"    \n"
+"    Opções:\n"
+"      -a\tfaz referência a variáveis array indexados\n"
+"      -A\tfaz referência a variáveis array associativos\n"
+"      -f\tfaz referência a funções de shell\n"
+"      -p\texibe uma lista de todas as variáveis ou funções somente-leitura,\n"
+"    \t\tdependendo da opção -f ser informada ou não\n"
+"    \n"
+"    Um argumento de `--' desabilita processamento de opções posteriores.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que uma opção inválida seja fornecida ou\n"
+"    NOME seja inválido."
+
+# help shift
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"Desloca parâmetros posicionais.\n"
+"    \n"
+"    Renomeia os parâmetros posicionais $N+1,$N+2 ... até $1,$2 ...  Se N "
+"não\n"
+"    for fornecido, presume-se que ele seja 1.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que N seja negativo ou maior que $#."
+
+# help source
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Executa comandos de um arquivo no shell atual.\n"
+"    \n"
+"    Lê e executa comandos de ARQUIVO no shell atual. As entradas em\n"
+"    $PATH são usadas para localizar o diretório contendo ARQUIVO. Se\n"
+"    quaisquer ARGUMENTOS forem fornecidos, eles se tornam parâmetros\n"
+"    posicionais quando ARQUIVO é executado.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna o status do último comando executado em ARQUIVO; falha se\n"
+"    ARQUIVO não puder ser lido."
+
+# help suspend
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Suspende execução do shell.\n"
+"    \n"
+"    Suspende a execução deste shell até que receba um sinal SIGCONT.\n"
+"    A menos que seja forçado, `shells` de login não podem ser suspensas.\n"
+"    \n"
+"    Opções:\n"
+"      -f\tforça a suspensão, ainda que o shell seja um de login\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que controle de trabalho não esteja habilitado\n"
+"    ou ocorra um erro."
+
+# help test
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"Avalia expressão condicional.\n"
+"    \n"
+"    Sai com um status de 0 (verdadeiro) ou 1 (falso) dependendo da "
+"avaliação\n"
+"    de EXPR. As expressões podem ser unárias ou binárias. Expressões "
+"unárias\n"
+"    são normalmente usadas para examinar o status de um arquivo. Há\n"
+"    operadores de strings e também há operadores de comparação numérica.\n"
+"    \n"
+"    O comportamento do teste depende do número de argumentos. Leia a página\n"
+"    de manual do `bash' para a especificação completa.\n"
+"    \n"
+"    Operadores de arquivos:\n"
+"    \n"
+"      -a ARQUIVO     Verdadeiro, se arquivo existir.\n"
+"      -b ARQUIVO     Verdadeiro, se arquivo for um bloco especial.\n"
+"      -c ARQUIVO     Verdadeiro, se arquivo for um caractere especial.\n"
+"      -d ARQUIVO     Verdadeiro, se arquivo for um diretório.\n"
+"      -e ARQUIVO     Verdadeiro, se arquivo existir.\n"
+"      -f ARQUIVO     Verdadeiro, se arquivo existir e for um arquivo "
+"normal.\n"
+"      -g ARQUIVO     Verdadeiro, se arquivo for set-group-id.\n"
+"      -h ARQUIVO     Verdadeiro, se arquivo for um link simbólico.\n"
+"      -L ARQUIVO     Verdadeiro, se arquivo for um link simbólico.\n"
+"      -k ARQUIVO     Verdadeiro, se arquivo tiver o bit `sticky' definido.\n"
+"      -p ARQUIVO     Verdadeiro, se arquivo for um `pipe' dado.\n"
+"      -r ARQUIVO     Verdadeiro, se arquivo for um legível por você.\n"
+"      -s ARQUIVO     Verdadeiro, se arquivo existir e não estiver vazio.\n"
+"      -S ARQUIVO     Verdadeiro, se arquivo for um socket.\n"
+"      -t FD          Verdadeiro, se FD estiver aberto em um terminal.\n"
+"      -u ARQUIVO     Verdadeiro, se arquivo estiver com set-user-id.\n"
+"      -w ARQUIVO     Verdadeiro, se arquivo puder ser escrito por você.\n"
+"      -x ARQUIVO     Verdadeiro, se arquivo puder ser executado por você.\n"
+"      -O ARQUIVO     Verdadeiro, se arquivo efetivamente for seu (owned).\n"
+"      -G ARQUIVO     Verdadeiro, se arquivo efetivamente for do seu grupo.\n"
+"      -N ARQUIVO     Verdadeiro, se arquivo foi modificado desde a última\n"
+"                     leitura.\n"
+"    \n"
+"      ARQ1 -nt ARQ2  Verdadeiro se ARQ1 for mais novo que ARQ2, conforme\n"
+"                     última data de modificação.\n"
+"    \n"
+"      ARQ1 -ot ARQ2  Verdadeiro, se ARQ1 for mais velho que ARQ2.\n"
+"    \n"
+"      ARQ1 -ef ARQ2  Verdadeiro, se ARQ1 for um link rígido para ARQ2.\n"
+"    \n"
+"    Operadores de string:\n"
+"    \n"
+"      -z STRING      Verdadeiro, se string estiver vazia.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      Verdadeiro, se string não estiver vazia.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     Verdadeiro, se strings forem iguais.\n"
+"      STRING1 != STRING2\n"
+"                     Verdadeiro, se strings não forem iguais.\n"
+"      STRING1 < STRING2\n"
+"                     Verdadeiro, se STRING1 estiver antes de STRING2, de\n"
+"                     acordo com a ordem alfabética.\n"
+"      STRING1 > STRING2\n"
+"                     Verdadeiro, se STRING1 estiver depois de STRING2, de\n"
+"                     acordo com a ordem alfabética.\n"
+"    \n"
+"    Outros operadores:\n"
+"    \n"
+"      -o OPÇÃO       Verdadeiro, se a opção shell OPÇÃO estiver habilitada.\n"
+"      -v VAR         Verdadeiro, se a variável shell VAR estiver definida.\n"
+"      -R VAR         Verdadeiro, se a variável shell VAR estiver definida\n"
+"                     e for uma referência de nome.\n"
+"      ! EXPR         Verdadeiro, se a expressão EXPR for falsa.\n"
+"      EXPR1 -a EXPR2 Verdadeiro, se ambas EXPR1 e EXPR2 forem verdadeiras.\n"
+"      EXPR1 -o EXPR2 Verdadeiro, se ao menos uma das expressões for "
+"verdadeira.\n"
+"    \n"
+"      arg1 OP arg2   Testes aritméticos.  OP é um dentre -eq, -ne, -lt, -"
+"le,\n"
+"                     -gt, or -ge.\n"
+"    \n"
+"    Operadores binários de aritmética retornam verdadeiro se ARG1 for "
+"igual,\n"
+"    não-igual, menor-que, menor-ou-igual-a ou maior-ou-igual-a ARG2.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, se EXPR for avaliada como verdadeira; falha, se EXPR "
+"for\n"
+"    avaliada como falsa ou um argumento inválido for informado."
+
+# help [
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Avalia expressões condicionais.\n"
+"    \n"
+"    Esse é um sinônimo para o comando interno `test', mas o último\n"
+"    argumento deve ser um `]' literal, para corresponder ao `[' que abriu."
+
+# help times
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Exibe tempos de processos.\n"
+"    \n"
+"    Imprime os tempos de sistema e de usuário acumulados pelo shell e\n"
+"    todos seus processo filhos.\n"
+"    \n"
+"    Status de saída:\n"
+"    Sempre com sucesso."
+
+# help trap
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"Tratamento de sinais e outros eventos.\n"
+"    \n"
+"    Define e ativa manipuladores a serem executados quando o shell recebe\n"
+"    sinais ou outras condições.\n"
+"    \n"
+"    ARG é um comando a ser lido e executado quando o shell recebe o\n"
+"    ESPEC-SINAL do(s) sinal(is). Se ARG for vazio (e um único ESPEC-SINAL\n"
+"    for informado) ou `-', cada sinal especificado é redefinido para seu\n"
+"    valor original. Se ARG for uma string nula, cada ESPEC-SINAL é ignorado\n"
+"    pela seu shell e pelos comados chamados por ela.\n"
+"    \n"
+"    Se um ESPEC-SINAL for EXIT (0), ARG é executado na saída do shell.\n"
+"    Se ESPEC-SINAL for DEBUG, ARG é executado antes de todo comando.\n"
+"    Se ESPEC-SINAL for RETURN, ARG é executado toda vez que uma função ou\n"
+"    um script shell executados pelos comandos internos `.' ou `source'\n"
+"    finalizarem suas execuções. Um ESPEC-SINAL sendo ERR significa executar\n"
+"    ARG toda vez que uma falha do comando poderia causar o shell sair,\n"
+"    quando a opção -e está habilitada.\n"
+"    \n"
+"    Se nenhum argumento for fornecido, `trap' imprime a lista de comandos\n"
+"    associados a cada sinal.\n"
+"    \n"
+"    Opções:\n"
+"      -l\timprime uma lista de nomes de sinais e seus números\n"
+"      \t\tcorrespondentes\n"
+"      -p\texibe os comandos associados ao tratamento com cada\n"
+"      \t\tESPEC-SINAL\n"
+"    \n"
+"    Cada ESPEC-SINAL é um nome de sinal em <signal.h> ou um número\n"
+"    de sinal. Nomes de sinais são sensíveis a caracteres maiúsculo e\n"
+"    minúsculo e o prefixo SIG (sinal) é opcional. Um SINAL pode ser enviado\n"
+"    para o shell com \"kill -SINAL $$\".\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que um ESPEC-SINAL seja inválido ou\n"
+"    uma opção inválida seja fornecida."
+
+# help type
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"Exibe informação sobre o tipo de comando.\n"
+"    \n"
+"    Para cada NOME, indica como ele seria interpretado se fosse usado como\n"
+"    um nome de comando.\n"
+"    \n"
+"    Opções:\n"
+"      -a\texibe todas as localizações contendo um executável chamado NOME;\n"
+"    \t\tinclui apelidos (alias), comandos internos e funções,\n"
+"    \t\tse, e somente se, a opção `-p' não for usada em conjunto\n"
+"      -f\tsuprime a procura por função do shell\n"
+"      -P\tforça uma pesquisa em PATH por cada  NOME, mesmo se ele for\n"
+"    \t\tum apelido, um comando interno ou uma função, e retorna o nome\n"
+"    \t\tdo arquivo de disco que seria executado\n"
+"      -p\tretorna o nome do arquivo de disco que seria executado ou nada,\n"
+"    \t\tse `type -t NOME' não retornasse `file'\n"
+"      -t\tmostra uma única palavra que é uma dentre `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' ou `', se NOME for um apelido,\n"
+"    \t\tpalavra reservada da shell, comando interno do shell,\n"
+"    \t\tarquivo de disco ou não encontrado, respectivamente\n"
+"    \n"
+"    Argumentos:\n"
+"      NOME\tNome de comando a ser interpretado.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, se todos os NOMEs forem encontrados; falha, se algum\n"
+"    deles não for encontrado."
+
+# help ulimit
+#: builtins.c:1431
+#, fuzzy
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Modifica limites de recursos do shell.\n"
+"    \n"
+"    Fornece controle sobre os recursos disponíveis para o shell e\n"
+"    seus processos, em sistemas que permitem tal controle.\n"
+"    \n"
+"    Opções:\n"
+"      -S\tusa um limite `soft' de recursos\n"
+"      -H\tusa um limite `hard' de recursos\n"
+"      -a\ttodos os limites atuais são relatados\n"
+"      -b\to tamanho do buffer do socket\n"
+"      -c\to tamanho máximo dos arquivos centrais criados\n"
+"      -d\to tamanho máximo de um segmento de dados do processo\n"
+"      -e\ta prioridade máxima de agendamento (`nice')\n"
+"      -f\to tamanho máximo de arquivos escritos pelo shell e seus filhos\n"
+"      -i\to número máximo de sinais pendentes\n"
+"      -k\to número máximo de kqueues alocadas para este processo\n"
+"      -l\to tamanho máximo que um processo pode alocar da memória\n"
+"      -m\to tamanho máximo de conjunto residente\n"
+"      -n\to número máximo de descritores de arquivo abertos\n"
+"      -p\to tamanho de buffer de `pipe'\n"
+"      -q\to número máximo de bytes em files de mensagem POSIX\n"
+"      -r\to tempo real máximo de prioridade de agendamento\n"
+"      -s\to tamanho máximo de pilha\n"
+"      -t\ta quantidade máxima de tempo de CPU em segundos\n"
+"      -u\to número máximo de processos de usuário\n"
+"      -v\to tamanho de memória virtual\n"
+"      -x\to número máximo de travas de arquivos\n"
+"      -P\to número máximo de pseudo-terminais\n"
+"      -T\to número máximo de fluxos (threads)\n"
+"    \n"
+"    Nem todas as opções estão disponíveis em todas as plataformas.\n"
+"    \n"
+"    Se LIMITE for fornecido, ele é o novo valor do recurso especificado;\n"
+"    os valores especiais de LIMITE `soft', `hard' e `unlimited' referem-se\n"
+"    ao atual limite suave, o atual limite rígido e nenhum limite,\n"
+"    respectivamente. Do contrário, o valor atual do recurso especificado\n"
+"    é impresso. Se nenhuma opção for fornecida, então -f é presumida.\n"
+"    \n"
+"    Valores estão em acréscimos de 1024 bytes, exceto para -t, que está\n"
+"    em segundos; -p, que é em 512 bytes; e -u, que é um número sem\n"
+"    escala de processos.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que uma opção inválida seja fornecida ou\n"
+"    ocorra um erro."
+
+# help umask
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"Exibe ou define máscara de modo de arquivo.\n"
+"    \n"
+"    Define a máscara de criação de arquivos do usuário para MODO. Se MODO\n"
+"    for omitido, imprime o valor atual da máscara.\n"
+"    \n"
+"    Se MODO inicia com um dígito, ele é interpretado como um número octal;\n"
+"    do contrário, ele é uma string de modo simbólico como a que é aceita\n"
+"    pelo chmod(1).\n"
+"    \n"
+"    Opções:\n"
+"      -p\tse MODO for omitido, exibe em um formulário que pode ser usado\n"
+"      \t\tcomo entrada\n"
+"      -S\ttorna a saída simbólica; do contrário, um número octal é mostrado\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que MODO seja inválido ou uma opção\n"
+"    inválida seja fornecida."
+
+# help wait
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"Espera por conclusão de trabalho e retorna o status de saída.\n"
+"    \n"
+"    Espera por cada processo identificado por um ID, o que pode ser um ID\n"
+"    de processo ou uma especificação de trabalho, e relata seu status de\n"
+"    término. Se ID não for fornecido, espera por todos os processos filhos\n"
+"    ativos e o status de retorno é zero. Se ID é uma especificação de\n"
+"    trabalho, espera por todos os processos naquela sequência de comandos\n"
+"    dos trabalhos.\n"
+"    \n"
+"    Se a opção -n for fornecida, espera pelo próximo trabalho terminar e\n"
+"    retorna seu status de trabalho.\n"
+"    \n"
+"    Se a opção -f for fornecida, e o controle de trabalho estiver ativado,\n"
+"    espera o ID especificado terminar, em vez de esperar ele alterar o\n"
+"    status.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna o status do último ID; falha, se ID for inválido ou uma opção\n"
+"    inválida for fornecida."
+
+# help wait
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"Espera por conclusão de processo e retorna o status de saída.\n"
+"    \n"
+"    Espera por cada processo especificado por um PID e relata seu status\n"
+"    de término. SE PID não for fornecido, espera por todos os processos\n"
+"    filhos atualmente ativos e o status de retorno é zero. PID deve ser\n"
+"    um ID de processo.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna o status do último ID; falha, se ID for inválido ou uma opção\n"
+"    inválida for fornecida."
+
+# help for
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Executa comandos para cada membro em uma lista.\n"
+"    \n"
+"    O loop `for' executa uma sequência de comandos para cada membro em\n"
+"    uma lista de itens. Se `in PALAVRAS ...;' não estiver presente, então\n"
+"    `in \"$@\"' é presumido. Para cada elemento em PALAVRAS, NOME é "
+"definido\n"
+"    com aquele elemento e os COMANDOS são executados.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna o status do último comando executado."
+
+# help for ((    (?)
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Loop `for' aritmético.\n"
+"    \n"
+"    Equivalente a\n"
+"    \t(( EXPR1 ))\n"
+"    \twhile (( EXPR2 )); do\n"
+"    \t\tCOMANDOS\n"
+"    \t\t(( EXPR3 ))\n"
+"    \tdone\n"
+"    EXPR1, EXPR2 e EXPR3 são expressões aritméticas. Se alguma expressão\n"
+"    for omitida, ele se comporta como se a avaliação resultasse em 1.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna o status do último comando executado."
+
+# help select
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Seleciona palavras de uma lista e executa comandos.\n"
+"    \n"
+"    As PALAVRAS são expandidas, gerando uma lista de palavras.\n"
+"    O conjunto de palavras expandidas é exibido no erro padrão,\n"
+"    cada um precedido por um número. Se `in PALAVRAS' não estiver\n"
+"    presente, `in \"$@\"' é presumido. Então, o prompt PS3 é exibido\n"
+"    e uma linha é lida da entrada padrão. Se a linha consiste\n"
+"    do número correspondendo àquele nas palavras exibidas, então\n"
+"    NOME é definido para aquela palavra. Se a linha estiver vazia,\n"
+"    PALAVRAS e o prompt são exibidos novamente. Se EOF (fim do\n"
+"    arquivo) for lido, o comando conclui. Qualquer outro valor\n"
+"    lido causa NOME ser definido como nulo. A linha lida é salva\n"
+"    na variável REPLY. COMANDOS são executados após cada seleção\n"
+"    até um comando `break' ser executado.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna o status do último comando executado."
+
+# help time
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"Relata o tempo consumido pela execução da linha de comandos.\n"
+"    \n"
+"    Executa LINHA-COMANDOS e imprime um resumo do tempo real,\n"
+"    tempo de CPU do usuário e do sistema, gastos executando\n"
+"    LINHA-COMANDOS, quando este terminar.\n"
+"    \n"
+"    Opções:\n"
+"      -p\timprime o resumo do tempo no formato portátil do Posix\n"
+"    \n"
+"    O valor da variável TIMEFORMAT é usada como formato de saída.\n"
+"    \n"
+"    Status de saída:\n"
+"    O status de retorno é o status retornado por LINHA-COMANDOS."
+
+# help case
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Executa comandos baseados em correspondência de padrão.\n"
+"    \n"
+"    Seletivamente executa COMANDOS baseados na PALAVRA correspondendo\n"
+"    a PADRÃO. O `|' é usado para separar múltiplos padrões.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna o status do último comando executado."
+
+# help if
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Executa comandos baseados em condicional.\n"
+"    \n"
+"    A lista `if COMANDOS' é executada. Se seu status de saída for zero,\n"
+"    então a lista `then COMANDOS' é executada. Do contrário, cada lista\n"
+"    `elif COMANDOS' é executada em turnos e, se seu status de saída for\n"
+"    zero, a lista `then COMANDOS' correspondente é executada e o comando\n"
+"    `if' conclui. Do contrário, a lista `else COMANDOS' é executada, se\n"
+"    presente. O status de saída de toda construção é o status de saída do\n"
+"    último comando executado, ou zero, se nenhuma condição testada\n"
+"    resultou em verdadeiro.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna o status do último comando executado."
+
+# help while
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Executa comandos desde que se obtenha sucesso nos testes.\n"
+"    \n"
+"    Expande e executa COMANDOS desde que o último comando nos\n"
+"    COMANDOS de `while' tenham status de saída zero.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna o status do último comando executado."
+
+# help until
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Executa comandos desde que não se obtenha sucesso nos testes.\n"
+"    \n"
+"    Expande e executa COMANDOS desde que o último comando nos\n"
+"    COMANDOS de `until' tenham status de saída zero que seja\n"
+"    não-zero.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna o status do último comando executado."
+
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"Cria um coprocesso chamado NOME.\n"
+"    \n"
+"    Executa COMANDO assincronamente, com a saída padrão e entrada padrão\n"
+"    do comando conectados via um `pipe' (redirecionamento) para descritores\n"
+"    de arquivo atribuídos para índices 0 e 1 de uma variável array NOME\n"
+"    no shell em execução. O NOME padrão é \"COPROC\".\n"
+"    \n"
+"    Status de saída:\n"
+"    O comando coproc retorna um status de saída de 0."
+
+# help function
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"Define uma função de shell.\n"
+"    \n"
+"    Cria uma função de shell chamada NOME. Quando chamado como um comando\n"
+"    simples, NOME executa COMANDOs no contexto de chamada shell.  Quando\n"
+"    NOME é chamado, os argumentos são passados para a função como $1..$n\n"
+"    e o nome da função está em $FUNCNAME.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que NOME seja somente-leitura."
+
+# help -m {
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Agrupa comandos como uma unidade.\n"
+"    \n"
+"    Executa um conjunto de comandos em um grupo. Essa é uma\n"
+"    forma de redirecionar um todo um conjunto de comandos.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna o status do último comando executado."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"Resume trabalho em primeiro plano.\n"
+"    \n"
+"    Equivalente ao argumento ESPEC-JOB para comando `fg'. Resume um\n"
+"    trabalho parado ou enviado para plano de fundo. ESPEC-JOB pode\n"
+"    especificar tanto um nome de trabalho quanto um número de trabalho.\n"
+"    ESPEC-JOB seguido de um `&' coloca o trabalho em plano de fundo,\n"
+"    como se a especificação do trabalho tivesse sido fornecida como um\n"
+"    argumento para `bg'.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna o status de um trabalho resumido."
+
+# help '(('
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Avalia expressões aritméticas.\n"
+"    \n"
+"    A EXPRESSÃO é avaliada de acordo com as regras de avaliação aritmética.\n"
+"    Equivalente a \"let EXPRESSÃO\".\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna 1, se EXPRESSÃO for avaliada como 0; do contrário, retorna 0."
+
+# help '['
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"Executa comando condicional.\n"
+"    \n"
+"    Retorna um status de 0 ou 1 dependendo da avaliação da expressão\n"
+"    condicional EXPRESSÃO. Expressões são compostas dos mesmos primários\n"
+"    usados pelo comando interno `test' e pode ser combinado usando os\n"
+"    seguintes operadores:\n"
+"    \n"
+"      ( EXPRESSÃO )\tRetorna o valor de EXPRESSÃO\n"
+"      ! EXPRESSÃO\tVerdadeiro, se EXPRESSÃO for falsa; senão, falso\n"
+"      EXPR1 && EXPR2\tVerdadeiro, se ambas EXPR1 e EXPR2 forem verdadeiras;\n"
+"      \t\t\tsenão, falso\n"
+"      EXPR1 || EXPR2\tVerdadeiro, se EXPR1 ou EXPR2 for verdadeira;\n"
+"      \t\t\tsenão, falso\n"
+"    \n"
+"    Quando os operadores `==' e `!=' forem usados, a string à direita do\n"
+"    operador é usado como um padrão e uma correspondência de padrão é\n"
+"    realizada. Quando o operador `=~' é usado, a string à direita do\n"
+"    operador é correspondida como uma expressão regular.\n"
+"    \n"
+"    Os operadores && e || não avaliam EXPR2, se EXPR1 for suficiente para\n"
+"    determinar o valor da expressão.\n"
+"    \n"
+"    Status de saída:\n"
+"    0 ou 1 dependendo do valor de EXPRESSÃO."
+
+# help variables
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"Nomes e uso de variáveis comuns do shell.\n"
+"    \n"
+"    BASH_VERSION\tInformação da versão deste Bash.\n"
+"    CDPATH\t\tUma lista separada por dois-pontos de diretórios para\n"
+"    \t\t\tpesquisar por diretórios fornecidos como argumentos a `cd'.\n"
+"    GLOBIGNORE\t\tUma lista separada por dois-pontos de padrões descrevendo\n"
+"    \t\t\tarquivos a serem ignorados pela expansão de caminho.\n"
+"    HISTFILE\t\tO nome do arquivo no qual o histórico de comandos é\n"
+"    \t\t\tarmazenado.\n"
+"    HISTFILESIZE\tO número máximo de linhas que esse arquivo pode conter.\n"
+"    HISTSIZE\t\tO número máximo de linhas de histórico que um shell\n"
+"    \t\t\tpode acessar.\n"
+"    HOME\t\t\tO caminho completo para seu diretório de login.\n"
+"    HOSTNAME\t\tO nome da sua máquina.\n"
+"    HOSTTYPE\t\tO tipo de CPU sob a qual esta versão do Bash está\n"
+"    \t\t\tfuncionando.\n"
+"    IGNOREEOF\t\tControla a ação do shell na recepção de um caractere\n"
+"    \t\t\tde fim de arquivo (EOF) como uma entrada única. Se\n"
+"    \t\t\tdefinida, então seu valor é o número de caracteres de EOF\n"
+"    \t\t\tque podem ser vistos numa leva em uma linha vazia antes\n"
+"    \t\t\tdo shell sair (padrão 10). Do contrário, EOF significa\n"
+"    \t\t\to fim da entrada.\n"
+"    MACHTYPE\t\tUma string descrevendo o sistema no qual Bash está sendo\n"
+"    \t\t\texecutado.\n"
+"    MAILCHECK\t\tCom qual frequência, em segundos, Bash verifica por novo\n"
+"    \t\t\tcorreio.\n"
+"    MAILPATH\t\tUma lista separada por dois-pontos de arquivos que Bash\n"
+"    \t\t\tverifica por novo correio.\n"
+"    OSTYPE\t\t\tA versão do Unix no qual Bash está sendo executado.\n"
+"    PATH\t\t\tUma lista separada por dois-pontos de diretórios para\n"
+"    \t\t\tpesquisar ao se procurar por comandos.\n"
+"    PROMPT_COMMAND\tUm comando a ser executado antes de imprimir cada "
+"prompt\n"
+"    \t\t\tprimário.\n"
+"    PS1\t\t\t\tA string de prompt primário.\n"
+"    PS2\t\t\t\tA string de prompt secundária.\n"
+"    PWD\t\t\t\tO caminho completo do diretório atual.\n"
+"    SHELLOPTS\t\tUma lista separada por dois-pontos de opções shell\n"
+"    \t\t\t\thabilitadas.\n"
+"    TERM\t\t\tO nome do tipo de terminal atual.\n"
+"    TIMEFORMAT\t\tO formato de saída para estatísticas de tempo exibidas\n"
+"    \t\t\t\tpela palavra reservada `time'.\n"
+"    auto_resume\t\tNão-nulo significa que uma palavra de comando aparecendo\n"
+"    \t\t\t\tem uma linha, por si só, é procurada primeiro na lista de\n"
+"    \t\t\t\ttrabalhos atualmente parados. Se encontrado lá, aquele\n"
+"    \t\t\t\ttrabalho é levado para primeiro plano. Um valor de `exact'\n"
+"    \t\t\t\tsignifica que a palavra de comando deve corresponder\n"
+"    \t\t\t\texatamente um comando na lista de trabalhos parados. Um\n"
+"    \t\t\t\tvalor de `substring' significa que a palavra de comando\n"
+"    \t\t\t\tdeve corresponder a uma substring do trabalho. Qualquer\n"
+"    \t\t\t\toutro valor significa que o comando deve ser um prefixo\n"
+"    \t\t\t\tde um trabalho parado.\n"
+"    histchars\t\tCaracteres controlando expansão de histórico e\n"
+"    \t\t\t\tsubstituição rápida. O primeiro caractere é o de\n"
+"    \t\t\t\tsubstituição de histórico, normalmente `!'. O segundo\n"
+"    \t\t\t\té o caractere `quick substitution', normalmente `^'.\n"
+"    \t\t\t\tO terceiro é o caractere `quick sbustitution',\n"
+"    \t\t\t\tnormalmente `#'\n"
+"    HISTIGNORE\t\tUma lista separada por dois-pontos de padrões usados para\n"
+"    \t\t\t\tdecidir quais comandos deveriam ser salvos na lista de\n"
+"    \t\t\t\thistórico.\n"
+
+# help pushd
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Adiciona diretórios a uma pilha.\n"
+"    \n"
+"    Adiciona um diretório ao topo da pilha de diretórios ou movimenta\n"
+"    a pilha, fazendo o novo topo da pilha ser o diretório atual de\n"
+"    trabalho. Com nenhum argumento, efetua troca do topo entre dois\n"
+"    diretórios.\n"
+"    \n"
+"    Opções:\n"
+"      -n\tSuprime a alteração normal de diretório ao adicionar\n"
+"      \t\tdiretórios à pilha, de forma que apenas a pilha é manipulada.\n"
+"    \n"
+"    Argumentos:\n"
+"      +N\tMovimenta a pilha de forma que o n-ésimo diretório (a contar\n"
+"      \t\tda esquerda da lista mostrada por `dirs', iniciando com zero)\n"
+"      \t\testá no topo.\n"
+"    \n"
+"      -N\tMovimenta a pilha de forma que o n-ésimo diretório (a contar\n"
+"      \t\tda direita da lista mostrada por `dirs', iniciando com zero)\n"
+"      \t\testá no topo.\n"
+"    \n"
+"      dir\tAdiciona DIR à pilha de diretórios no topo, fazendo dele o\n"
+"      \t\tnovo diretório de trabalho atual.\n"
+"    \n"
+"     O comando interno `dirs' exibe a pilha de diretórios.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que um argumento inválido seja fornecido ou\n"
+"    a alteração de diretório falhar."
+
+# help popd
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Remove diretórios de uma pilha.\n"
+"\n"
+"    Remove entradas da pilha de diretórios. Com nenhum argumento, remove\n"
+"    o diretório do topo da pilha e altera o novo diretório do topo.\n"
+"    \n"
+"    Opções:\n"
+"      -n\tSuprime a alteração normal de diretório ao remover\n"
+"      \t\tdiretórios da pilha, de forma que apenas a pilha é manipulada.\n"
+"    \n"
+"    Argumentos:\n"
+"      +N\tRemove a n-ésima entrada a contar da esquerda da lista\n"
+"      \t\tmostrada por `dirs', iniciando com zero. Ex.: `popd +0'\n"
+"      \t\tremove o primeiro diretório e `popd +1', o segundo.\n"
+"    \n"
+"      -N\tRemove a n-ésima entrada a contar da direita da lista\n"
+"      \t\tmostrada por `dirs', iniciando com zero. Ex.: `popd +0'\n"
+"      \t\tremove o último diretório e `popd -1', o penúltimo.\n"
+"    \n"
+"    O comando interno `dirs' exibe a pilha de diretório.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que um argumento inválido seja fornecido ou\n"
+"    a alteração de diretório falhar."
+
+# help dirs
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Exibe pilha de diretórios.\n"
+"    \n"
+"    Exibe a lista de diretórios atualmente memorizados. Diretórios são\n"
+"    inseridos na lista por meio do comando `pushd'; você pode obter\n"
+"    de volta da lista com o comando `popd'.\n"
+"    \n"
+"    Opções:\n"
+"      -c\tlimpa a pilha de diretórios excluindo todos os elementos\n"
+"      -l\tnão mostra versões de diretórios prefixadas por til,\n"
+"      \t\trelativos ao seu diretório HOME\n"
+"      -p\texibe a pilha de diretório com uma entrada por linha\n"
+"      -v\texibe a pilha de diretório com uma entrada por linha,\n"
+"      \t\tprefixada com sua posição na pilha\n"
+"    \n"
+"    Argumentos:\n"
+"      +N\tExibe a n-ésima entrada a partir da esquerda da linha\n"
+"      \t\tmostrada por `dirs' chamado sem opções, iniciando com zero.\n"
+"    \n"
+"      -N\tExibe a n-ésima entrada a partir da esquerda da linha\n"
+"      \t\tmostrada por `dirs' chamado sem opções, iniciando com zero.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que uma opção inválida seja fornecida ou\n"
+"    ocorrer um erro."
+
+# help shopt
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"Define e remove definições de opções de shell.\n"
+"    \n"
+"    Altera a configuração de cada opção shell NOME-OPÇÃO. Sem qualquer\n"
+"    argumento de opção, lista cada OPTNAME fornecido com uma indicação\n"
+"    de se cada uma está definida ou não.\n"
+"    \n"
+"    Opções:\n"
+"      -o\trestringe NOME-OPÇÃO àqueles definidos para usar com `set -o'\n"
+"      -p\timprime cada opção shell com uma indicação de seu status\n"
+"      -q\tsuprime a saída\n"
+"      -s\thabilita (set) com NOME-OPÇÃO\n"
+"      -u\tdesabilita (unset) com NOME-OPÇÃO\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, se NOME-OPÇÃO estiver habilitado; falha, se uma\n"
+"    opção inválida for fornecida ou NOME-OPÇÃO estiver desabilitado."
+
+# help printf
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"Formata e imprime ARGUMENTOS sob controle de FORMATO.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tatribui a saída à variável shell VAR, ao invés de exibi-la\n"
+"      \t\t\tna saída padrão\n"
+"    \n"
+"    FORMATO é uma string de caractere que contém três tipos de objetos;\n"
+"    caracteres planos, que são simplesmente copiados para a saída padrão;\n"
+"    sequências de escape de caracteres, que são convertidas e copiadas\n"
+"    para a saída padrão; e especificações de formatos, cada um que causa\n"
+"    impressão do próximo argumento sucessivo.\n"
+"    \n"
+"    Além das especificações de formato padrão descritas em printf(1),\n"
+"    printf interpreta:\n"
+"    \n"
+"      %b\texpande sequências de escape com contrabarras no argumento\n"
+"      \t\tcorrespondente\n"
+"      %q\tcita o argumento de uma forma que pode ser usado como entrada\n"
+"      \t\tno shell\n"
+"      %(fmt)T\texibe a string de data-hora resultante do uso de FMT como\n"
+"      \t\t\tuma string de formato para strftime(3)\n"
+"    \n"
+"    O formato é usado como necessário para consumir todos os argumentos.\n"
+"    Se houver menos argumentos que o formato requer, especificações de\n"
+"    formato extras se comportam como se uma string com valor zero ou nula,\n"
+"    como apropriado, tivesse sido fornecida.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que uma opção inválida seja fornecida ou\n"
+"    ocorra um erro de escrita ou atribuição."
+
+# help complete
+#: builtins.c:1971
+#, fuzzy
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Especifica como argumentos são completados por Readline.\n"
+"    \n"
+"    Para cada NOME, especifica como argumentos são completados. Se nenhuma\n"
+"    opção for fornecida, especificações existente para completar são\n"
+"    impressas em uma forma que permite-as serem usadas como entrada.\n"
+"    \n"
+"    Opções:\n"
+"      -p\timprime especificações existentes de completar em um formato "
+"usável\n"
+"      -r\tremove uma especificação de completar para cada NOME ou, se "
+"nenhum\n"
+"      \t\tNOME for fornecido, todas as especificações de completar\n"
+"      -D\taplica as completações e ações como sendo o padrão para comandos\n"
+"      \t\tsem qualquer especificação definida\n"
+"      -E\taplica as completações e ações para tentativa de completar\n"
+"      \t\tcomandos -- \"vazios\" em uma linha vazia\n"
+"      -I\taplica completações e ações para a palavra inicial (geralmente o\n"
+"    \t\tcomando)\n"
+"    \n"
+"    Ao tentar completar, as ações são fornecidas na ordem em que as opções\n"
+"    de letras de caixa alta são listadas acima. Se várias opções forem "
+"fornecidas,\n"
+"    a opção -D tem precedência sobre -E, e ambos têm precedência sobre -I.\n"
+"    sobre -E.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que uma opção inválida seja fornecida ou\n"
+"    ocorra um erro."
+
+# help compgen
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Exibe possibilidades de completação dependendo das opções.\n"
+"    \n"
+"    Tem a intenção de ser usado de dentro de uma função shell gerando\n"
+"    completações possíveis. Se o argumento opcional PALAVRA for fornecido,\n"
+"    comparações entre PALAVRA é gerada.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que uma opção inválida seja fornecida ou\n"
+"    ocorra um erro."
+
+# help compopt
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"Modifica ou exibe opções de completação.\n"
+"    \n"
+"    Modifica as opções de completação para cada NOME ou, se nenhum NOME for\n"
+"    fornecido, a completação sendo executada atualmente. Se nenhuma OPÇÃO\n"
+"    for fornecida, imprime as opções de completação para cada NOME ou a\n"
+"    especificação de completação atual.\n"
+"    \n"
+"    Opções:\n"
+"    \t-o OPÇÃO\tDefine a opção de completação OPÇÃO para cada NOME\n"
+"    \t-D\t\tAltera opções para a completação de comando \"padrão\"\n"
+"    \t-E\t\tAltera opções para a completação de comando \"vazio\"\n"
+"    \t-I\t\tAltera as opções para completação na palavra inicial\n"
+"    \n"
+"    Ao usar `+o', ao invés de `-o', desliga a opção especificada.\n"
+"    \n"
+"    Argumentos:\n"
+"    \n"
+"    Cada NOME se refere a um comando para o qual uma especificação de\n"
+"    completação deve ter sido definida anteriormente usando o comando\n"
+"    interno `complete'. Se nenhum NOME for fornecido, `compopt` deve\n"
+"    ser chamado por uma função atualmente gerando completações e as\n"
+"    opções para aquele gerador de completações atualmente em execução\n"
+"    são modificados.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que uma opção inválido seja fornecido ou\n"
+"    NOME não tem uma especificação de completação definida."
+
+# help mapfile
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"Lê linhas da entrada padrão para uma variável array indexado.\n"
+"    \n"
+"    Lê linhas da entrada padrão para a variável array indexado ARRAY ou\n"
+"    do descritor de arquivo FD, se a opção -u for fornecida. A variável\n"
+"    MAPFILE é o ARRAY padrão.\n"
+"    \n"
+"    Opções:\n"
+"      -d DELIM      Usa DELIM para terminar linhas, ao invés de nova linha\n"
+"      -n NÚMERO     Copia no máximo NÚMERO linhas. Se NÚMERO for 0, todas "
+"as\n"
+"                    linhas são copiadas\n"
+"      -O ORIGEM     Inicia atribuição de ARRAY no índice ORIGEM. O índice\n"
+"                    padrão é 0\n"
+"      -s NÚMERO     Descarta as primeiras NÚMERO linhas lidas\n"
+"      -t            Remove uma DELIM ao final para cada linha lida\n"
+"                    (padrão: nova linha)\n"
+"      -u FD         Lê linhas do descritor de arquivos FD, ao invés da "
+"entrada\n"
+"                    padrão\n"
+"      -C CHAMADA    Avalia CHAMADA a cada vez que QUANTIDADE linhas foram "
+"lidas\n"
+"      -c QUANTIDADE Especifica o número de linhas lidas entre cada chamada "
+"para\n"
+"                    CHAMADA\n"
+"    \n"
+"    Argumentos:\n"
+"      ARRAY         Nome da variável array para usar para arquivos de dados\n"
+"    \n"
+"    Se -C for fornecido sem -c, a quantidade padrão é 5000. Quando CHAMADA "
+"é\n"
+"    avaliada, é fornecido o índice para o próximo elemento da array ser\n"
+"    atribuído e a linha para ser atribuída àquele elemento como argumentos\n"
+"    adicionais\n"
+"    \n"
+"    Se não for fornecido com uma origem explícita, mapfile vai limpar ARRAY\n"
+"    antes de lhe atribuir.\n"
+"    \n"
+"    Status de saída:\n"
+"    Retorna sucesso, a menos que uma opção inválida seja dada ou ARRAY for\n"
+"    somente leitura ou não for um array indexado."
+
+# help readarray
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Lê linhas de um arquivo para uma variável array.\n"
+"    \n"
+"    Um sinônimo para `mapfile'."
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "Retorna o contexto da chamada de sub-rotina atual.\n"
+#~ "    \n"
+#~ "    Sem EXPR, retorna "
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process: processo %5ld (%s) em the_pipeline"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "Sinal desconhecido #"
+
+#~ msgid "Copyright (C) 2015 Free Software Foundation, Inc."
+#~ msgstr "Copyright (C) 2015 Free Software Foundation, Inc."
+
+#~ msgid "Copyright (C) 2014 Free Software Foundation, Inc."
+#~ msgstr "Copyright (C) 2014 Free Software Foundation, Inc."
+
+#~ msgid ":"
+#~ msgstr ":"
+
+# Não traduzir "true", esta é uma opção "builtin" do "bash" que é exibida ao executar "help" e acessível com "help true".
+#~ msgid "true"
+#~ msgstr "true"
+
+# Não traduzir "false", esta é uma opção "builtin" do "bash" que é exibida ao executar "help" e acessível com "help false".
+#~ msgid "false"
+#~ msgstr "false"
+
+#~ msgid "disown [-h] [-ar] [jobspec ...]"
+#~ msgstr "disown [-h] [-ar] [ESPEC-JOB ...]"
+
+# não traduzir, este é um comando
+#~ msgid "times"
+#~ msgstr "times"
+
+# help typeset
+#~ msgid ""
+#~ "Set variable values and attributes.\n"
+#~ "    \n"
+#~ "    Obsolete.  See `help declare'."
+#~ msgstr ""
+#~ "Define valores e atributos de variável.\n"
+#~ "    \n"
+#~ "    Obsoleto.  Veja `help declare'."
+
+# help history
+#~ msgid ""
+#~ "Display or manipulate the history list.\n"
+#~ "    \n"
+#~ "    Display the history list with line numbers, prefixing each modified\n"
+#~ "    entry with a `*'.  An argument of N lists only the last N entries.\n"
+#~ "    \n"
+#~ "    Options:\n"
+#~ "      -c\tclear the history list by deleting all of the entries\n"
+#~ "      -d offset\tdelete the history entry at offset OFFSET.\n"
+#~ "    \n"
+#~ "      -a\tappend history lines from this session to the history file\n"
+#~ "      -n\tread all history lines not already read from the history file\n"
+#~ "      -r\tread the history file and append the contents to the history\n"
+#~ "    \t\tlist\n"
+#~ "      -w\twrite the current history to the history file\n"
+#~ "    \t\tand append them to the history list\n"
+#~ "    \n"
+#~ "      -p\tperform history expansion on each ARG and display the result\n"
+#~ "    \t\twithout storing it in the history list\n"
+#~ "      -s\tappend the ARGs to the history list as a single entry\n"
+#~ "    \n"
+#~ "    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+#~ "    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+#~ "    \n"
+#~ "    If the HISTTIMEFORMAT variable is set and not null, its value is "
+#~ "used\n"
+#~ "    as a format string for strftime(3) to print the time stamp "
+#~ "associated\n"
+#~ "    with each displayed history entry.  No time stamps are printed "
+#~ "otherwise.\n"
+#~ "    \n"
+#~ "    Exit Status:\n"
+#~ "    Returns success unless an invalid option is given or an error occurs."
+#~ msgstr ""
+#~ "Exibe ou manipula a lista de histórico.\n"
+#~ "    \n"
+#~ "    Exibe a lista de histórico com números de linhas, prefixando cada\n"
+#~ "    entrada modificada com um `*'.  Um argumento de N lista apenas as\n"
+#~ "    últimas N entradas.\n"
+#~ "    \n"
+#~ "    Opções:\n"
+#~ "      -c\t\t\tlimpa a lista de histórico ao excluir todas as entradas\n"
+#~ "      -d POSIÇÃO\texclui a entrada de histórico na posição POSIÇÃO.\n"
+#~ "      -a\t\t\tanexa linhas de histórico desta sessão no arquivo de\n"
+#~ "      \t\t\t\thistórico\n"
+#~ "      -n\t\t\tlê todas as linhas de histórico ainda não lidas do\n"
+#~ "      \t\t\t\tarquivo de histórico\n"
+#~ "      -r\t\t\tlê o histórico e anexa os conteúdos à lista de histórico\n"
+#~ "      -w\t\t\tescreve o histórico atual para o arquivo de histórico e\n"
+#~ "      \t\t\t\tanexa-os à lista de histórico    \n"
+#~ "      -p\t\t\texecuta expansão de histórico em cada ARG e exibe o\n"
+#~ "      \t\t\t\tresultado sem armazená-lo na lista de histórico\n"
+#~ "      -s\t\t\tanexa os ARGs à lista de histórico como uma única entrada\n"
+#~ "    \n"
+#~ "    Se ARQUIVO for fornecido, ele é usado como o arquivo de histórico.\n"
+#~ "    Do contrário, se a variável HISTFILE tiver um valor, este será "
+#~ "usado;\n"
+#~ "    senão, usa de ~/.bash_history.\n"
+#~ "    \n"
+#~ "    Se a variável HISTTIMEFORMAT for definida e não for nula, seu valor "
+#~ "é\n"
+#~ "    usado como uma string de formato para strftime(3) para mostrar a "
+#~ "marca\n"
+#~ "    de tempo associada com cada entrada de histórico exibida. Do "
+#~ "contrário,\n"
+#~ "    nenhuma marca de tempo é mostrada.\n"
+#~ "    \n"
+#~ "    Status de saída:\n"
+#~ "    Retorna sucesso, a menos que uma opção inválida seja fornecida ou\n"
+#~ "    ocorra um erro."
+
+# help kill
+#~ msgid ""
+#~ "Send a signal to a job.\n"
+#~ "    \n"
+#~ "    Send the processes identified by PID or JOBSPEC the signal named by\n"
+#~ "    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+#~ "    SIGTERM is assumed.\n"
+#~ "    \n"
+#~ "    Options:\n"
+#~ "      -s sig\tSIG is a signal name\n"
+#~ "      -n sig\tSIG is a signal number\n"
+#~ "      -l\tlist the signal names; if arguments follow `-l' they are\n"
+#~ "    \t\tassumed to be signal numbers for which names should be listed\n"
+#~ "    \n"
+#~ "    Kill is a shell builtin for two reasons: it allows job IDs to be "
+#~ "used\n"
+#~ "    instead of process IDs, and allows processes to be killed if the "
+#~ "limit\n"
+#~ "    on processes that you can create is reached.\n"
+#~ "    \n"
+#~ "    Exit Status:\n"
+#~ "    Returns success unless an invalid option is given or an error occurs."
+#~ msgstr ""
+#~ "Envia um sinal para um trabalho.\n"
+#~ "\n"
+#~ "    Envia aos processos identificados pelo PID ou pelo ESPEC-JOB o sinal\n"
+#~ "    informado por SIGSPEC ou SIGNUM. Se SIGSPEC e SIGNUM\n"
+#~ "    não estiverem presentes, então, SIGTERM é presumido.\n"
+#~ "    \n"
+#~ "    Opções:\n"
+#~ "      -s SIGSPEC\tSIGSPEC especifica o nome do sinal\n"
+#~ "      -n SIGNUM\t\tSIGNUM representa um número de sinal\n"
+#~ "      -l\t\t\tlista os nomes dos sinais; se `-l' for acompanhado por\n"
+#~ "      \t\t\t\toutros argumentos, presume-se estes sejam números de\n"
+#~ "      \t\t\t\tsinais para os quais nomes deveriam ser listados\n"
+#~ "    \n"
+#~ "    `Kill' é um comando interno do shell por duas razões: ele permite\n"
+#~ "    IDs de trabalho serem usados ao invés de IDs de processo e permite\n"
+#~ "    que processos sejam matados caso o limite de processos que você pode\n"
+#~ "    criar seja atingido.\n"
+#~ "    \n"
+#~ "    Status de saída:\n"
+#~ "    Retorna sucesso, a menos que uma opção inválida seja fornecida ou\n"
+#~ "    ocorra um erro."
+
+# help set
+#~ msgid ""
+#~ "Set or unset values of shell options and positional parameters.\n"
+#~ "    \n"
+#~ "    Change the value of shell attributes and positional parameters, or\n"
+#~ "    display the names and values of shell variables.\n"
+#~ "    \n"
+#~ "    Options:\n"
+#~ "      -a  Mark variables which are modified or created for export.\n"
+#~ "      -b  Notify of job termination immediately.\n"
+#~ "      -e  Exit immediately if a command exits with a non-zero status.\n"
+#~ "      -f  Disable file name generation (globbing).\n"
+#~ "      -h  Remember the location of commands as they are looked up.\n"
+#~ "      -k  All assignment arguments are placed in the environment for a\n"
+#~ "          command, not just those that precede the command name.\n"
+#~ "      -m  Job control is enabled.\n"
+#~ "      -n  Read commands but do not execute them.\n"
+#~ "      -o option-name\n"
+#~ "          Set the variable corresponding to option-name:\n"
+#~ "              allexport    same as -a\n"
+#~ "              braceexpand  same as -B\n"
+#~ "              emacs        use an emacs-style line editing interface\n"
+#~ "              errexit      same as -e\n"
+#~ "              errtrace     same as -E\n"
+#~ "              functrace    same as -T\n"
+#~ "              hashall      same as -h\n"
+#~ "              histexpand   same as -H\n"
+#~ "              history      enable command history\n"
+#~ "              ignoreeof    the shell will not exit upon reading EOF\n"
+#~ "              interactive-comments\n"
+#~ "                           allow comments to appear in interactive "
+#~ "commands\n"
+#~ "              keyword      same as -k\n"
+#~ "              monitor      same as -m\n"
+#~ "              noclobber    same as -C\n"
+#~ "              noexec       same as -n\n"
+#~ "              noglob       same as -f\n"
+#~ "              nolog        currently accepted but ignored\n"
+#~ "              notify       same as -b\n"
+#~ "              nounset      same as -u\n"
+#~ "              onecmd       same as -t\n"
+#~ "              physical     same as -P\n"
+#~ "              pipefail     the return value of a pipeline is the status "
+#~ "of\n"
+#~ "                           the last command to exit with a non-zero "
+#~ "status,\n"
+#~ "                           or zero if no command exited with a non-zero "
+#~ "status\n"
+#~ "              posix        change the behavior of bash where the default\n"
+#~ "                           operation differs from the Posix standard to\n"
+#~ "                           match the standard\n"
+#~ "              privileged   same as -p\n"
+#~ "              verbose      same as -v\n"
+#~ "              vi           use a vi-style line editing interface\n"
+#~ "              xtrace       same as -x\n"
+#~ "      -p  Turned on whenever the real and effective user ids do not "
+#~ "match.\n"
+#~ "          Disables processing of the $ENV file and importing of shell\n"
+#~ "          functions.  Turning this option off causes the effective uid "
+#~ "and\n"
+#~ "          gid to be set to the real uid and gid.\n"
+#~ "      -t  Exit after reading and executing one command.\n"
+#~ "      -u  Treat unset variables as an error when substituting.\n"
+#~ "      -v  Print shell input lines as they are read.\n"
+#~ "      -x  Print commands and their arguments as they are executed.\n"
+#~ "      -B  the shell will perform brace expansion\n"
+#~ "      -C  If set, disallow existing regular files to be overwritten\n"
+#~ "          by redirection of output.\n"
+#~ "      -E  If set, the ERR trap is inherited by shell functions.\n"
+#~ "      -H  Enable ! style history substitution.  This flag is on\n"
+#~ "          by default when the shell is interactive.\n"
+#~ "      -P  If set, do not resolve symbolic links when executing commands\n"
+#~ "          such as cd which change the current directory.\n"
+#~ "      -T  If set, the DEBUG trap is inherited by shell functions.\n"
+#~ "      --  Assign any remaining arguments to the positional parameters.\n"
+#~ "          If there are no remaining arguments, the positional parameters\n"
+#~ "          are unset.\n"
+#~ "      -   Assign any remaining arguments to the positional parameters.\n"
+#~ "          The -x and -v options are turned off.\n"
+#~ "    \n"
+#~ "    Using + rather than - causes these flags to be turned off.  The\n"
+#~ "    flags can also be used upon invocation of the shell.  The current\n"
+#~ "    set of flags may be found in $-.  The remaining n ARGs are "
+#~ "positional\n"
+#~ "    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+#~ "    ARGs are given, all shell variables are printed.\n"
+#~ "    \n"
+#~ "    Exit Status:\n"
+#~ "    Returns success unless an invalid option is given."
+#~ msgstr ""
+#~ "Define ou remove definição de valores das opções e dos parâmetros "
+#~ "posicionais\n"
+#~ "do shell:\n"
+#~ "    \n"
+#~ "    Altera o valor de opções e de parâmetros posicionais do shell ou "
+#~ "mostra\n"
+#~ "    os nomes ou valores de variáveis shell.\n"
+#~ "    \n"
+#~ "    Opções:\n"
+#~ "      -a  Marca variáveis, que foram modificadas ou criadas, para "
+#~ "exportação.\n"
+#~ "      -b  Notifica sobre terminação de trabalho imediatamente.\n"
+#~ "      -e  Sai imediatamente se um comando sai com um status não-zero.\n"
+#~ "      -f  Desabilita a geração de nome de arquivo (\"globbing\").\n"
+#~ "      -h  Memoriza a localização de comandos à medida em que são "
+#~ "procurados.\n"
+#~ "      -k  Todos argumentos de atribuição são colocados no ambiente para "
+#~ "um\n"
+#~ "          comando, e não apenas aqueles que precedem o nome do comando.\n"
+#~ "      -m  Controle de trabalho está habilitado.\n"
+#~ "      -n  Lê comandos, mas não os executa.\n"
+#~ "      -o NOME-OPÇÃO\n"
+#~ "          Define a variável correspondendo a NOME-OPÇÃO:\n"
+#~ "              allexport    mesmo que -a\n"
+#~ "              braceexpand  mesmo que -B\n"
+#~ "              emacs        usa interface de edição de linha estilo Emacs\n"
+#~ "              errexit      mesmo que -e\n"
+#~ "              errtrace     mesmo que -E\n"
+#~ "              functrace    mesmo que -T\n"
+#~ "              hashall      mesmo que -h\n"
+#~ "              histexpand   mesmo que -H\n"
+#~ "              history      habilita histórico de comandos\n"
+#~ "              ignoreeof    shell não vai sair após leitura de EOF\n"
+#~ "              interactive-comments\n"
+#~ "                           permite mostrar comentários em comandos "
+#~ "interativos\n"
+#~ "              keyword      mesmo que -k\n"
+#~ "              monitor      mesmo que -m\n"
+#~ "              noclobber    mesmo que -C\n"
+#~ "              noexec       mesmo que -n\n"
+#~ "              noglob       mesmo que -f\n"
+#~ "              nolog        atualmente aceito, mas ignorado\n"
+#~ "              notify       mesmo que -b\n"
+#~ "              nounset      mesmo que -u\n"
+#~ "              onecmd       mesmo que -t\n"
+#~ "              physical     mesmo que -P\n"
+#~ "              pipefail     o valor de retorno de uma linha de comandos é "
+#~ "o\n"
+#~ "                           status do último comando a sair com status não-"
+#~ "zero,\n"
+#~ "                           ou zero se nenhum comando saiu com status não "
+#~ "zero\n"
+#~ "              posix        altera o comportamento do bash, onde a "
+#~ "operação\n"
+#~ "                           padrão diverge dos padrões do Posix para\n"
+#~ "                           corresponder a estes padrões\n"
+#~ "              privileged   mesmo que -p\n"
+#~ "              verbose      mesmo que -v\n"
+#~ "              vi           usa interface de edição de linha estilo vi\n"
+#~ "              xtrace       mesmo que -x\n"
+#~ "      -p  Ligado sempre que IDs de usuário real e efetivo não "
+#~ "corresponderem.\n"
+#~ "          Desabilita processamento do arquivo $ENV e importação de "
+#~ "funções da\n"
+#~ "          shell. Ao desligar essa opção, causa o uid e o gid efetivo "
+#~ "serem\n"
+#~ "          os uid e gid reais.\n"
+#~ "      -t  Sai após a leitura e execução de um comando.\n"
+#~ "      -u  Trata limpeza (unset) de variáveis como um erro quando "
+#~ "substituindo.\n"
+#~ "      -v  Mostra linhas de entrada do shell na medida em que forem "
+#~ "lidas.\n"
+#~ "      -x  Mostra comandos e seus argumentos na medida em que forme "
+#~ "executados.\n"
+#~ "      -B  o shell vai realizar expansão de chaves\n"
+#~ "      -C  Se definido, não permite arquivos normais existentes serem\n"
+#~ "          sobrescritos por redirecionamento da saída.\n"
+#~ "      -E  Se definido, a armadilha ERR é herdada por funções do shell.\n"
+#~ "      -H  Habilita substituição de histórico estilo \"!\". Essa "
+#~ "sinalização está\n"
+#~ "          habilitada por padrão quando  shell é interativa.\n"
+#~ "      -P  Se definida, não resolve links simbólicos ao sair de comandos, "
+#~ "tais\n"
+#~ "          como `cd' (que altera o diretório atual).\n"
+#~ "      -T  Se definido, a armadilha DEBUG é herdada por funções do shell.\n"
+#~ "      --  Atribui quaisquer argumentos restantes aos parâmetros "
+#~ "posicionais.\n"
+#~ "          Se não houver argumentos restantes, os parâmetros posicionais "
+#~ "são\n"
+#~ "          limpos (unset).\n"
+#~ "      -   Atribui quaisquer argumentos restantes aos parâmetros "
+#~ "posicionais.\n"
+#~ "          As opções -x e -v são desligadas.\n"
+#~ "    \n"
+#~ "    Usar +, ao invés de -, causa essas sinalizações serem desligadas. As\n"
+#~ "    sinalizações também podem ser usadas por meio de chamada do shell. "
+#~ "As\n"
+#~ "    sinalizações atualmente definidas podem ser encontradas em $-. Os n "
+#~ "ARGs\n"
+#~ "    restantes são parâmetros posicionais e são atribuídos, em ordem, a "
+#~ "$1, $2,\n"
+#~ "    .. $n. Se nenhuma ARG for fornecido, todas as variáveis shell são\n"
+#~ "    mostradas.\n"
+#~ "    \n"
+#~ "    Status de saída:\n"
+#~ "    Retorna sucesso, a menos que uma opção inválida seja fornecida."
+
+# help coproc
+#~ msgid ""
+#~ "Create a coprocess named NAME.\n"
+#~ "    \n"
+#~ "    Execute COMMAND asynchronously, with the standard output and "
+#~ "standard\n"
+#~ "    input of the command connected via a pipe to file descriptors "
+#~ "assigned\n"
+#~ "    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+#~ "    The default NAME is \"COPROC\".\n"
+#~ "    \n"
+#~ "    Exit Status:\n"
+#~ "    Returns the exit status of COMMAND."
+#~ msgstr ""
+#~ "Cria um coprocesso chamado NOME.\n"
+#~ "    \n"
+#~ "    Executa COMANDO assincronamente, com a saída padrão e entrada padrão\n"
+#~ "    do comando conectados via um `pipe' (redirecionamento) para "
+#~ "descritores\n"
+#~ "    de arquivo atribuídos para índices 0 e 1 de uma variável array NOME\n"
+#~ "    no shell em execução. O NOME padrão é \"COPROC\".\n"
+#~ "    \n"
+#~ "    Status de saída:\n"
+#~ "    Retorna o status de saída de COMANDO."
+
+#~ msgid "Missing `}'"
+#~ msgstr "Faltando `}'"
+
+#~ msgid "brace_expand> "
+#~ msgstr "brace_expand> "
+
+#~ msgid "Attempt to free unknown command type `%d'.\n"
+#~ msgstr "Tentativa de liberar um tipo de comando desconhecido `%d'.\n"
+
+#~ msgid "Report this to %s\n"
+#~ msgstr "Informar o ocorrido para %s\n"
+
+#~ msgid "Stopping myself..."
+#~ msgstr "Parando-me..."
+
+#~ msgid "Tell %s to fix this someday.\n"
+#~ msgstr "Informar %s para corrigir o ocorrido.\n"
+
+#~ msgid "execute_command: bad command type `%d'"
+#~ msgstr "execute_command: `%d' é um tipo incorreto de comando "
+
+#~ msgid "real\t"
+#~ msgstr "real\t"
+
+#~ msgid "user\t"
+#~ msgstr "usuário\t"
+
+#~ msgid "sys\t"
+#~ msgstr "sistema\t"
+
+#~ msgid ""
+#~ "real\t0m0.00s\n"
+#~ "user\t0m0.00s\n"
+#~ "sys\t0m0.00s\n"
+#~ msgstr ""
+#~ "real   \t0m0.00s\n"
+#~ "usuário\t0m0.00s\n"
+#~ "sistema\t0m0.00s\n"
+
+#~ msgid "cannot duplicate fd %d to fd 1: %s"
+#~ msgstr "impossível duplicar fd (descritor de arquivo) %d para fd 1: %s"
+
+#~ msgid "%s: output redirection restricted"
+#~ msgstr "%s: redirecionamento da saída restringido"
+
+#~ msgid "Out of memory!"
+#~ msgstr "Memória esgotada!"
+
+#~ msgid "You have already added item `%s'\n"
+#~ msgstr "Você já adicionou o item `%s'\n"
+
+#~ msgid "You have entered %d (%d) items.  The distribution is:\n"
+#~ msgstr "Entrados %d (%d) itens.  A distribuição é:\n"
+
+#~ msgid "slot %3d: "
+#~ msgstr "encaixe (slot) %3d: "
+
+#~ msgid "<unknown>"
+#~ msgstr "<desconhecido>"
+
+#~ msgid "%s: bg background job?"
+#~ msgstr "%s: bg trabalho no segundo plano?"
+
+#~ msgid ""
+#~ "Redirection instruction from yyparse () '%d' is\n"
+#~ "out of range in make_redirection ()."
+#~ msgstr ""
+#~ "A instrução de redirecionamento do yyparse () '%d' está\n"
+#~ "fora do intervalo em make_redirection ()."
+
+#~ msgid "clean_simple_command () got a command with type %d."
+#~ msgstr "clean_simple_command () recebeu um comando do tipo %d."
+
+#~ msgid "got errno %d while waiting for %d"
+#~ msgstr "recebido erro número %d enquanto aguardava por %d"
+
+#~ msgid "syntax error near unexpected token `%c'"
+#~ msgstr "erro de sintaxe próximo do `token' não esperado `%c'"
+
+#~ msgid "print_command: bad command type `%d'"
+#~ msgstr "print_command: tipo de comando incorreto `%d'"
+
+#~ msgid "cprintf: bad `%%' argument (%c)"
+#~ msgstr "cprintf: argumento `%%' incorreto (%c)"
+
+#~ msgid "option `%s' requires an argument"
+#~ msgstr "a opção `%s' requer um argumento"
+
+#~ msgid "%s: unrecognized option"
+#~ msgstr "%s: a opção não é reconhecida"
+
+#~ msgid "`-c' requires an argument"
+#~ msgstr "A opção `-c' requer um argumento"
+
+#~ msgid "%s: cannot execute directories"
+#~ msgstr "%s: impossível executar diretórios"
+
+#~ msgid "Bad code in sig.c: sigprocmask"
+#~ msgstr "Código incorreto em sig.c: sigprocmask"
+
+#~ msgid "can't make pipes for process substitution: %s"
+#~ msgstr "impossível criar `pipes' para a substituição do processo: %s"
+
+#~ msgid "reading"
+#~ msgstr "lendo"
+
+#~ msgid "writing"
+#~ msgstr "escrevendo"
+
+#~ msgid "process substitution"
+#~ msgstr "substituição de processo"
+
+#~ msgid "command substitution"
+#~ msgstr "substituição de comando"
+
+#~ msgid "Can't reopen pipe to command substitution (fd %d): %s"
+#~ msgstr ""
+#~ "Impossível reabrir o `pipe' para substituição de comando (fd %d): %s"
+
+#~ msgid "$%c: unbound variable"
+#~ msgstr "$%c: variável não associada"
+
+#~ msgid "%s: bad arithmetic substitution"
+#~ msgstr "%s: substituição aritmética incorreta"
+
+#~ msgid "-%s: binary operator expected"
+#~ msgstr "-%s: esperado operador binário"
+
+#~ msgid "%s[%s: bad subscript"
+#~ msgstr "%s[%s: índice incorreto"
+
+#~ msgid "[%s: bad subscript"
+#~ msgstr "[%s: índice incorreto"
+
+#~ msgid "xrealloc: cannot reallocate %lu bytes (%lu bytes allocated)"
+#~ msgstr "xrealloc: impossível realocar %lu bytes (%lu bytes alocados)"
+
+#~ msgid "digits occur in two different argv-elements.\n"
+#~ msgstr "os dígitos aparecem em dois elementos argv diferentes.\n"
+
+#~ msgid "option %c\n"
+#~ msgstr "opção %c\n"
+
+#~ msgid "option a\n"
+#~ msgstr "opção a\n"
+
+#~ msgid "option b\n"
+#~ msgstr "opção b\n"
+
+#~ msgid "option c with value `%s'\n"
+#~ msgstr "opção c com o valor `%s'\n"
+
+#~ msgid "?? sh_getopt returned character code 0%o ??\n"
+#~ msgstr "?? sh_getopt retornou o código de caracter 0%o ??\n"
+
+#~ msgid "non-option ARGV-elements: "
+#~ msgstr "elementos de ARGV que não são opção:"
+
+#~ msgid "%s: Unknown flag %s.\n"
+#~ msgstr "%s: Opção %s desconhecida.\n"
+
+#~ msgid "Unknown directive `%s'"
+#~ msgstr "Diretiva desconhecida `%s'"
+
+#~ msgid "%s must be inside of a $BUILTIN block"
+#~ msgstr "%s deve estar dentro de um bloco $BUILTIN"
+
+#~ msgid "%s found before $END"
+#~ msgstr "%s encontrado antes de $END"
+
+#~ msgid "%s already has a function (%s)"
+#~ msgstr "%s já possui uma função (%s)"
+
+#~ msgid "%s already had a docname (%s)"
+#~ msgstr "%s já possui um nome de documento (%s)"
+
+#~ msgid "%s already has short documentation (%s)"
+#~ msgstr "%s já possui uma documentação curta (%s)"
+
+#~ msgid "%s already has a %s definition"
+#~ msgstr "%s já possui a definição %s"
+
+#~ msgid "mkbuiltins: Out of virtual memory!\n"
+#~ msgstr "mkbuiltins: Memória virtual esgotada!\n"
+
+#~ msgid "read [-r] [-p prompt] [-a array] [-e] [name ...]"
+#~ msgstr "read [-r] [-p MENSAGEM] [-a ARRAY] [-e] [NOME ...]"
+
+#~ msgid "%[DIGITS | WORD] [&]"
+#~ msgstr "%[D�GITOS | PALAVRA] [&]"
+
+#~ msgid "variables - Some variable names and meanings"
+#~ msgstr "variáveis - Alguns nomes de variáveis e suas descrições"
+
+#~ msgid "`alias' with no arguments or with the -p option prints the list"
+#~ msgstr "`alias' sem nenhum argumento, ou com a opção -p, exibe a lista"
+
+#~ msgid "of aliases in the form alias NAME=VALUE on standard output."
+#~ msgstr "de aliases na forma `alias NOME=VALOR' na saída padrão."
+
+#~ msgid "Otherwise, an alias is defined for each NAME whose VALUE is given."
+#~ msgstr ""
+#~ "Ou então, um alias é definido para cada NOME cujo VALOR for fornecido."
+
+#~ msgid "A trailing space in VALUE causes the next word to be checked for"
+#~ msgstr "Um espaço após VALOR faz a próxima palavra ser verificada para"
+
+#~ msgid "alias substitution when the alias is expanded.  Alias returns"
+#~ msgstr "substituição do alias quando o alias é expandido. Alias retorna"
+
+#~ msgid "true unless a NAME is given for which no alias has been defined."
+#~ msgstr ""
+#~ "verdadeiro, a não ser que seja fornecido um NOME sem alias definido."
+
+#~ msgid ""
+#~ "Remove NAMEs from the list of defined aliases.  If the -a option is given,"
+#~ msgstr ""
+#~ "Remove NOMEs da lista de aliases definidos. Se a opção -a for fornecida,"
+
+#~ msgid "then remove all alias definitions."
+#~ msgstr "então todas as definições de alias são removidas."
+
+#~ msgid "Bind a key sequence to a Readline function, or to a macro.  The"
+#~ msgstr ""
+#~ "Víncula uma seqüência de teclas a uma função de leitura de linha, ou a uma"
+
+#~ msgid "syntax is equivalent to that found in ~/.inputrc, but must be"
+#~ msgstr ""
+#~ "macro.  A sintaxe é equivalente à encontrada em ~/.inputrc, mas deve ser"
+
+#~ msgid ""
+#~ "passed as a single argument: bind '\"\\C-x\\C-r\": re-read-init-file'."
+#~ msgstr ""
+#~ "passada como um único argumento: bind '\"\\C-x\\C-r\": re-read-init-file'."
+
+#~ msgid "Arguments we accept:"
+#~ msgstr "Argumentos permitidos:"
+
+#~ msgid ""
+#~ "  -m  keymap         Use `keymap' as the keymap for the duration of this"
+#~ msgstr ""
+#~ "  -m  MAPA-TECLAS    Usar `MAPA-TECLAS' como mapa das teclas pela duração"
+
+#~ msgid "                     command.  Acceptable keymap names are emacs,"
+#~ msgstr "                     deste comando.  Os nomes aceitos são emacs,"
+
+#~ msgid ""
+#~ "                     emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move,"
+#~ msgstr ""
+#~ "                     emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move,"
+
+#~ msgid "                     vi-command, and vi-insert."
+#~ msgstr "                     vi-command, and vi-insert."
+
+#~ msgid "  -l                 List names of functions."
+#~ msgstr "  -l                 Listar os nomes das funções."
+
+#~ msgid "  -P                 List function names and bindings."
+#~ msgstr "  -P                 Listar nomes e associações das funções."
+
+#~ msgid ""
+#~ "  -p                 List functions and bindings in a form that can be"
+#~ msgstr ""
+#~ "  -p                 Listar nomes e associações das funções de uma forma"
+
+#~ msgid "                     reused as input."
+#~ msgstr "                     que pode ser reutilizada como entrada."
+
+#~ msgid "  -r  keyseq         Remove the binding for KEYSEQ."
+#~ msgstr "  -r  SEQ-TECLAS     Remove o vínculo para SEQ-TECLAS."
+
+#~ msgid "  -f  filename       Read key bindings from FILENAME."
+#~ msgstr "  -f  ARQUIVO        Ler os vínculos das teclas em ARQUIVO."
+
+#~ msgid ""
+#~ "  -q  function-name  Query about which keys invoke the named function."
+#~ msgstr "  -q  NOME-FUNÇÃO    Consultar quais teclas chamam esta função."
+
+#~ msgid "  -V                 List variable names and values"
+#~ msgstr "  -V                 Listar os nomes e os valores das variáveis."
+
+#~ msgid ""
+#~ "  -v                 List variable names and values in a form that can"
+#~ msgstr ""
+#~ "  -v                 Listar os nomes e os valores das variáveis de uma"
+
+#~ msgid "                     be reused as input."
+#~ msgstr "                     forma que pode ser reutilizada como entrada."
+
+#~ msgid ""
+#~ "  -S                 List key sequences that invoke macros and their "
+#~ "values"
+#~ msgstr ""
+#~ "  -S                 Listar as seqüências de teclas que chamam macros\n"
+#~ "                         e seus valores."
+
+#~ msgid ""
+#~ "  -s                 List key sequences that invoke macros and their "
+#~ "values in"
+#~ msgstr "  -s                 Listar seqüências de teclas que chamam macros"
+
+#~ msgid "                     a form that can be reused as input."
+#~ msgstr ""
+#~ "                     e seus valores de uma forma que pode ser\n"
+#~ "                         reutilizada como entrada."
+
+#~ msgid "Exit from within a FOR, WHILE or UNTIL loop.  If N is specified,"
+#~ msgstr "Sair de um laço FOR, WHILE ou UNTIL."
+
+#~ msgid "break N levels."
+#~ msgstr "Se N for especificado, sai de N níveis."
+
+#~ msgid "Resume the next iteration of the enclosing FOR, WHILE or UNTIL loop."
+#~ msgstr "Prossegue no próximo ciclo do laço FOR, WHILE ou UNTIL envolvente."
+
+#~ msgid "If N is specified, resume at the N-th enclosing loop."
+#~ msgstr "Se N for especificado, prossegue no N-ésimo laço envolvente."
+
+#~ msgid "Run a shell builtin.  This is useful when you wish to rename a"
+#~ msgstr ""
+#~ "Executa um comando interno do shell.  Útil quando desejamos substituir"
+
+#~ msgid "shell builtin to be a function, but need the functionality of the"
+#~ msgstr "um comando interno do shell por uma função, mas necessitamos da"
+
+#~ msgid "builtin within the function itself."
+#~ msgstr "funcionalidade do comando interno dentro da própria função."
+
+#~ msgid "Change the current directory to DIR.  The variable $HOME is the"
+#~ msgstr "Troca o diretório atual para DIR.  A variável $HOME é o padrão"
+
+#~ msgid "default DIR.  The variable $CDPATH defines the search path for"
+#~ msgstr "para DIR.  A variável $CDPATH define o caminho de procura para"
+
+#~ msgid "the directory containing DIR.  Alternative directory names in CDPATH"
+#~ msgstr ""
+#~ "o diretório que contém DIR.  Nomes de diretórios alternativos em CDPATH"
+
+#~ msgid "are separated by a colon (:).  A null directory name is the same as"
+#~ msgstr ""
+#~ "são separados por dois pontos (:).  Um nome de diretório nulo é o mesmo"
+
+#~ msgid "the current directory, i.e. `.'.  If DIR begins with a slash (/),"
+#~ msgstr "que o diretório atual, i.e. `.'.  Se DIR inicia com uma barra (/),"
+
+#~ msgid "then $CDPATH is not used.  If the directory is not found, and the"
+#~ msgstr "então $CDPATH não é usado.  Se o diretório não for encontrado, e a"
+
+#~ msgid "shell option `cdable_vars' is set, then try the word as a variable"
+#~ msgstr ""
+#~ "opção `cdable_vars' estiver definida, tentar usar DIR como um nome de"
+
+#~ msgid "name.  If that variable has a value, then cd to the value of that"
+#~ msgstr ""
+#~ "variável.  Se esta variável tiver valor, então `cd' para o valor desta"
+
+#~ msgid ""
+#~ "variable.  The -P option says to use the physical directory structure"
+#~ msgstr ""
+#~ "variável.  A opção -P indica para usar a estrutura física do diretório"
+
+#~ msgid ""
+#~ "instead of following symbolic links; the -L option forces symbolic links"
+#~ msgstr "em vez de seguir os vínculos simbólicos; a opção -L força seguir os"
+
+#~ msgid "to be followed."
+#~ msgstr "vínculos simbólicos."
+
+#~ msgid "Print the current working directory.  With the -P option, pwd prints"
+#~ msgstr "Exibe o diretório atual de trabalho.  Com a opção -P, `pwd' exibe"
+
+#~ msgid "the physical directory, without any symbolic links; the -L option"
+#~ msgstr "o diretório físico, sem nenhum vínculo simbólico; a opção -L faz"
+
+#~ msgid "makes pwd follow symbolic links."
+#~ msgstr "com que `pwd' siga os vínculos simbólicos."
+
+#~ msgid ""
+#~ "Runs COMMAND with ARGS ignoring shell functions.  If you have a shell"
+#~ msgstr ""
+#~ "Executa COMANDO com ARGs ignorando as funções da shell.  Ex: Havendo"
+
+#~ msgid "function called `ls', and you wish to call the command `ls', you can"
+#~ msgstr ""
+#~ "uma função `ls', e se for necessário executar o comando `ls', executa-se"
+
+#~ msgid ""
+#~ "say \"command ls\".  If the -p option is given, a default value is used"
+#~ msgstr ""
+#~ "\"command ls\".  Se a opção -p for fornecida, o valor padrão é utilizado"
+
+#~ msgid ""
+#~ "for PATH that is guaranteed to find all of the standard utilities.  If"
+#~ msgstr ""
+#~ "para PATH, garantindo-se o encontro de todos os utilitários padrão. Se"
+
+#~ msgid ""
+#~ "the -V or -v option is given, a string is printed describing COMMAND."
+#~ msgstr "a opção -V ou -v for fornecida, é exibida a descrição do COMANDO."
+
+#~ msgid "The -V option produces a more verbose description."
+#~ msgstr "A opção -V produz uma descrição mais extensa."
+
+#~ msgid "Declare variables and/or give them attributes.  If no NAMEs are"
+#~ msgstr "Declara variáveis e/ou dá-lhes atributos.  Se nenhum nome for"
+
+#~ msgid "given, then display the values of variables instead.  The -p option"
+#~ msgstr "fornecido, então são exibidos os valores das variáveis.  A opção -p"
+
+#~ msgid "will display the attributes and values of each NAME."
+#~ msgstr "exibe os atributos e valores para cada NOME."
+
+#~ msgid "The flags are:"
+#~ msgstr "As opções são:"
+
+#~ msgid "  -a\tto make NAMEs arrays (if supported)"
+#~ msgstr "  -a\tpara tornar NOMEs arrays, se houver suporte"
+
+#~ msgid "  -f\tto select from among function names only"
+#~ msgstr "  -f\tpara selecionar somente entre nomes de funções"
+
+#~ msgid "  -F\tto display function names without definitions"
+#~ msgstr "  -F\tpara exibir os nomes das funções omitindo suas definições"
+
+#~ msgid "  -r\tto make NAMEs readonly"
+#~ msgstr "  -r\tpara tornar NOMEs somente para leitura"
+
+#~ msgid "  -x\tto make NAMEs export"
+#~ msgstr "  -x\tpara fazer a exportação de NOMEs"
+
+#~ msgid "  -i\tto make NAMEs have the `integer' attribute set"
+#~ msgstr "  -i\tpara ativar o atributo `inteiro' em NOMEs "
+
+#~ msgid "Variables with the integer attribute have arithmetic evaluation (see"
+#~ msgstr "Variáveis com atributo inteiro são avaliadas aritmeticamente (veja"
+
+#~ msgid "`let') done when the variable is assigned to."
+#~ msgstr "`let') quando é feita uma atribuição de valor."
+
+#~ msgid "When displaying values of variables, -f displays a function's name"
+#~ msgstr "Ao exibir os valores das variáveis, -f exibe o nome da função e"
+
+#~ msgid "and definition.  The -F option restricts the display to function"
+#~ msgstr "sua definição.  A opção -F restringe a exibição ao nome da função"
+
+#~ msgid "name only."
+#~ msgstr "somente."
+
+#~ msgid ""
+#~ "Using `+' instead of `-' turns off the given attribute instead.  When"
+#~ msgstr "Usando `+' em vez de `-' faz o atributo ser desabilitado.  Quando"
+
+#~ msgid "used in a function, makes NAMEs local, as with the `local' command."
+#~ msgstr "usado em uma função, torna NOMEs local, como no comando `local'."
+
+#~ msgid "Obsolete.  See `declare'."
+#~ msgstr "Obsoleta.  Veja `declare'."
+
+#~ msgid "Create a local variable called NAME, and give it VALUE.  LOCAL"
+#~ msgstr "Cria uma variável local chamada NOME, e atribui VALOR.  LOCAL"
+
+#~ msgid "have a visible scope restricted to that function and its children."
+#~ msgstr "da variável NOME fique restrito à própria função e às suas filhas."
+
+#~ msgid "Output the ARGs.  If -n is specified, the trailing newline is"
+#~ msgstr "Exibe ARGs.  Se -n for fornecido, o caracter final de nova linha é"
+
+#~ msgid "suppressed.  If the -e option is given, interpretation of the"
+#~ msgstr ""
+#~ "suprimido.  Se a opção -e for fornecida, a interpretação dos seguintes"
+
+#~ msgid "following backslash-escaped characters is turned on:"
+#~ msgstr "caracteres após a contrabarra é ativada:"
+
+#~ msgid "\t\\a\talert (bell)"
+#~ msgstr "\t\\a\talerta (bell)"
+
+#~ msgid "\t\\b\tbackspace"
+#~ msgstr "\t\\b\tbackspace"
+
+#~ msgid "\t\\c\tsuppress trailing newline"
+#~ msgstr "\t\\c\tsuprimir o caracter final de nova linha"
+
+#~ msgid "\t\\E\tescape character"
+#~ msgstr "\t\\E\to caracter de escape"
+
+#~ msgid "\t\\f\tform feed"
+#~ msgstr "\t\\f\talimentação de formulário (form feed)"
+
+#~ msgid "\t\\n\tnew line"
+#~ msgstr "\t\\n\tnova linha"
+
+#~ msgid "\t\\r\tcarriage return"
+#~ msgstr "\t\\r\tretorno de carro (cr)"
+
+#~ msgid "\t\\t\thorizontal tab"
+#~ msgstr "\t\\t\ttabulação horizontal (ht)"
+
+#~ msgid "\t\\v\tvertical tab"
+#~ msgstr "\t\\v\ttabulação vertical (vt)"
+
+#~ msgid "\t\\\\\tbackslash"
+#~ msgstr "\t\\\\\tcontrabarra"
+
+#~ msgid "\t\\num\tthe character whose ASCII code is NUM (octal)."
+#~ msgstr "\t\\num\to caracter com código ASCII igual a NUM (octal)."
+
+#~ msgid ""
+#~ "You can explicitly turn off the interpretation of the above characters"
+#~ msgstr ""
+#~ "Pode-se explicitamente desabilitar a interpretação dos caracteres acima"
+
+#~ msgid "with the -E option."
+#~ msgstr "através da opção -E."
+
+#~ msgid ""
+#~ "Output the ARGs.  If -n is specified, the trailing newline is suppressed."
+#~ msgstr ""
+#~ "Exibe ARGS.  Se -n for fornecido, o caracter final de nova linha é "
+#~ "suprimido."
+
+#~ msgid "Enable and disable builtin shell commands.  This allows"
+#~ msgstr ""
+#~ "Habilita e desabilita os comandos internos do shell, permitindo usar"
+
+#~ msgid "you to use a disk command which has the same name as a shell"
+#~ msgstr ""
+#~ "um comando de disco que tenha o mesmo nome do comando interno do shell."
+
+#~ msgid "builtin.  If -n is used, the NAMEs become disabled; otherwise"
+#~ msgstr ""
+#~ "Se -n for especificado, os NOMEs são desabilitados, senão os nomes são"
+
+#~ msgid "NAMEs are enabled.  For example, to use the `test' found on your"
+#~ msgstr ""
+#~ "habilitados. Por exemplo, para usar `test' encontrado pelo PATH em vez"
+
+#~ msgid "path instead of the shell builtin version, type `enable -n test'."
+#~ msgstr ""
+#~ "da versão interna do comando, digite `enable -n test'. Em sistemas que"
+
+#~ msgid "On systems supporting dynamic loading, the -f option may be used"
+#~ msgstr ""
+#~ "suportam carregamento dinâmico, pode-se usar a opção -f para carregar"
+
+#~ msgid "to load new builtins from the shared object FILENAME.  The -d"
+#~ msgstr ""
+#~ "novos comandos internos do objeto compartilhado ARQUIVO.  A opção -d"
+
+#~ msgid "option will delete a builtin previously loaded with -f.  If no"
+#~ msgstr ""
+#~ "elimina os comandos internos previamente carregados com -f.  Se nenhum"
+
+#~ msgid "non-option names are given, or the -p option is supplied, a list"
+#~ msgstr ""
+#~ "nome for fornecido, ou se a opção -p for fornecida, uma lista de comandos"
+
+#~ msgid "of builtins is printed.  The -a option means to print every builtin"
+#~ msgstr ""
+#~ "internos é exibida.  A opção -a faz com que todos os comandos internos"
+
+#~ msgid "with an indication of whether or not it is enabled.  The -s option"
+#~ msgstr "sejam exibidos indicando se estão habilitados ou não.  A opção -s"
+
+#~ msgid "restricts the output to the Posix.2 `special' builtins.  The -n"
+#~ msgstr ""
+#~ "restringe a saída aos comandos internos `especiais' Posix.2.  A opção"
+
+#~ msgid "option displays a list of all disabled builtins."
+#~ msgstr "-n exibe a lista de todos os comandos internos desabilitados."
+
+#~ msgid ""
+#~ "Read ARGs as input to the shell and execute the resulting command(s)."
+#~ msgstr ""
+#~ "Ler ARGs como entrada do shell e executar o(s) comando(s) resultante(s)."
+
+#~ msgid "Getopts is used by shell procedures to parse positional parameters."
+#~ msgstr ""
+#~ "Getopts é utilizado pelos procedimentos do shell para fazer a leitura\n"
+#~ "    (parse) dos parâmetros posicionais."
+
+#~ msgid "OPTSTRING contains the option letters to be recognized; if a letter"
+#~ msgstr "OPÇÕES contém as letras das opções a serem reconhecidas; Se uma"
+
+#~ msgid "is followed by a colon, the option is expected to have an argument,"
+#~ msgstr "letra é seguida por dois pontos, a opção espera a presença de um"
+
+#~ msgid "which should be separated from it by white space."
+#~ msgstr "argumento que deve ser separado dela por espaço em branco."
+
+#~ msgid "Each time it is invoked, getopts will place the next option in the"
+#~ msgstr "Cada vez que for chamada, `getopts' irá colocar a próxima opção na"
+
+#~ msgid "shell variable $name, initializing name if it does not exist, and"
+#~ msgstr "variável do shell $NOME, inicializando NOME caso não exista, e o"
+
+#~ msgid "the index of the next argument to be processed into the shell"
+#~ msgstr "índice do próximo argumento a ser processado dentro da variável da"
+
+#~ msgid "variable OPTIND.  OPTIND is initialized to 1 each time the shell or"
+#~ msgstr "shell OPTIND.  OPTIND é inicializado com 1 cada vez que o script"
+
+#~ msgid "a shell script is invoked.  When an option requires an argument,"
+#~ msgstr ""
+#~ "do shell é chamado.  Quando uma opção requer um argumento, `getopts'"
+
+#~ msgid "getopts places that argument into the shell variable OPTARG."
+#~ msgstr "coloca este argumento dentro da variável do shell OPTARG."
+
+#~ msgid "getopts reports errors in one of two ways.  If the first character"
+#~ msgstr ""
+#~ "`getopts' informa os erros de duas maneiras.  Se o primeiro caracter de"
+
+#~ msgid "of OPTSTRING is a colon, getopts uses silent error reporting.  In"
+#~ msgstr "OPÇÕES for dois pontos, `getopts' usa o modo silencioso.  Neste"
+
+#~ msgid "this mode, no error messages are printed.  If an illegal option is"
+#~ msgstr "modo, nenhuma mensagem de erro é exibida.  Se uma opção ilegal for"
+
+#~ msgid "seen, getopts places the option character found into OPTARG.  If a"
+#~ msgstr "encontrada, `getopts' coloca o caracter da opção em OPTARG.  Se um"
+
+#~ msgid "required argument is not found, getopts places a ':' into NAME and"
+#~ msgstr ""
+#~ "argumento requerido não for encontrado, `getopts' coloca ':' em  NOME e"
+
+#~ msgid "sets OPTARG to the option character found.  If getopts is not in"
+#~ msgstr ""
+#~ "atribui a OPTARG o caracter de opção encontrado. Se `getopts' não está em"
+
+#~ msgid "silent mode, and an illegal option is seen, getopts places '?' into"
+#~ msgstr ""
+#~ "modo silencioso, e uma opção ilegal é encontrada, `getopts' coloca '?' em"
+
+#~ msgid "NAME and unsets OPTARG.  If a required option is not found, a '?'"
+#~ msgstr ""
+#~ "NOME e desativa OPTARG.  Se uma opção requerida não é encontrada, uma '?'"
+
+#~ msgid "is placed in NAME, OPTARG is unset, and a diagnostic message is"
+#~ msgstr ""
+#~ "é colocada em NOME, OPTARG é desativado, e uma mensagem de diagnóstico é"
+
+#~ msgid "printed."
+#~ msgstr "exibida."
+
+#~ msgid "If the shell variable OPTERR has the value 0, getopts disables the"
+#~ msgstr "Se a variável do shell OPTERR tem o valor 0, `getopts' desabilita a"
+
+#~ msgid "printing of error messages, even if the first character of"
+#~ msgstr "exibição de mensagens de erro, mesmo que o primeiro caracter de"
+
+#~ msgid "OPTSTRING is not a colon.  OPTERR has the value 1 by default."
+#~ msgstr "OPTSTRING não seja dois pontos.  OPTERR tem o valor 1 por padrão."
+
+#~ msgid "Getopts normally parses the positional parameters ($0 - $9), but if"
+#~ msgstr ""
+#~ "`getopts' normalmente faz a leitura dos parãmetros posicionais ($0 - $9),"
+
+#~ msgid "more arguments are given, they are parsed instead."
+#~ msgstr "mas, se mais argumentos forem fornecidos, então estes são lidos."
+
+#~ msgid "Exec FILE, replacing this shell with the specified program."
+#~ msgstr ""
+#~ "Executa ARQUIVO, substituindo esta shell pelo programa especificado."
+
+#~ msgid "If FILE is not specified, the redirections take effect in this"
+#~ msgstr ""
+#~ "Se ARQUIVO não for especificado, os redirecionamentos são efetivados"
+
+#~ msgid "shell.  If the first argument is `-l', then place a dash in the"
+#~ msgstr "neste shell.  Se o primeiro argumento for `-l', coloca um hífen no"
+
+#~ msgid "zeroth arg passed to FILE, as login does.  If the `-c' option"
+#~ msgstr "argumento `0' passado para ARQUIVO, como no login.  Se a opção `-c'"
+
+#~ msgid "is supplied, FILE is executed with a null environment.  The `-a'"
+#~ msgstr "for fornecida, ARQUIVO é executado com um ambiente nulo.  A opção"
+
+#~ msgid "option means to make set argv[0] of the executed process to NAME."
+#~ msgstr "`-a' significa atribuir NOME para argv[0] do processo executado."
+
+#~ msgid "If the file cannot be executed and the shell is not interactive,"
+#~ msgstr "Se o arquivo não puder ser executado e o shell não for interativa,"
+
+#~ msgid "then the shell exits, unless the variable \"no_exit_on_failed_exec\""
+#~ msgstr ""
+#~ "então o shell termina, a menos que a variável \"no_exit_on_failed_exec\""
+
+#~ msgid "is set."
+#~ msgstr "esteja inicializada."
+
+#~ msgid "is that of the last command executed."
+#~ msgstr "de saída é igual ao do último comando executado."
+
+#~ msgid ""
+#~ "FIRST and LAST can be numbers specifying the range, or FIRST can be a"
+#~ msgstr "PRIMEIRO e ÚLTIMO podem ser números especificando o intervalo, ou"
+
+#~ msgid "string, which means the most recent command beginning with that"
+#~ msgstr "PRIMEIRO pode ser uma cadeia de caracteres, representando o comando"
+
+#~ msgid "string."
+#~ msgstr "mais recente começado por estes caracteres."
+
+#~ msgid ""
+#~ "   -e ENAME selects which editor to use.  Default is FCEDIT, then EDITOR,"
+#~ msgstr ""
+#~ "   -e EDITOR seleciona qual editor usar.  O padrão é FCEDIT, depois "
+#~ "EDITOR,"
+
+#~ msgid ""
+#~ "      then the editor which corresponds to the current readline editing"
+#~ msgstr ""
+#~ "      depois o editor correspondente ao modo de edição atual da leitura"
+
+#~ msgid "      mode, then vi."
+#~ msgstr "      de linha, e depois o vi."
+
+#~ msgid "   -l means list lines instead of editing."
+#~ msgstr "   -l indica para listar as linha em vez de editá-las."
+
+#~ msgid "   -n means no line numbers listed."
+#~ msgstr "   -n indica para não listar os números das linhas."
+
+#~ msgid ""
+#~ "   -r means reverse the order of the lines (making it newest listed "
+#~ "first)."
+#~ msgstr ""
+#~ "   -r faz reverter a ordem das linhas (a última torna-se a primeira)."
+
+#~ msgid "With the `fc -s [pat=rep ...] [command]' format, the command is"
+#~ msgstr ""
+#~ "No formato `fc -s [ANTIGO=NOVO ...] [COMANDO]', o comando é executado"
+
+#~ msgid "re-executed after the substitution OLD=NEW is performed."
+#~ msgstr "novamente após a substituição de ANTIGO por NOVO ser realizada."
+
+#~ msgid "A useful alias to use with this is r='fc -s', so that typing `r cc'"
+#~ msgstr ""
+#~ "Um alias útil a ser usado é r='fc -s' para que, ao se digitar `r cc',"
+
+#~ msgid "runs the last command beginning with `cc' and typing `r' re-executes"
+#~ msgstr "seja executado o último comando começado por `cc' e, ao se digitar"
+
+#~ msgid "Place JOB_SPEC in the foreground, and make it the current job.  If"
+#~ msgstr ""
+#~ "Colocar JOB-ESPECIFICADO no primeiro plano, e torná-lo o trabalho atual."
+
+#~ msgid "JOB_SPEC is not present, the shell's notion of the current job is"
+#~ msgstr ""
+#~ "Se JOB-ESPECIFICADO não estiver presente, a noção do shell do trabalho"
+
+#~ msgid "used."
+#~ msgstr "atual é utilizada."
+
+#~ msgid "Place JOB_SPEC in the background, as if it had been started with"
+#~ msgstr ""
+#~ "Colocar JOB-ESPECIFICADO no segundo plano, como se tivesse sido ativado"
+
+#~ msgid "`&'.  If JOB_SPEC is not present, the shell's notion of the current"
+#~ msgstr "com `&'. Se JOB-ESPECIFICADO não estiver presente, a noção do shell"
+
+#~ msgid "job is used."
+#~ msgstr "do trabalho atual é utilizada."
+
+#~ msgid "For each NAME, the full pathname of the command is determined and"
+#~ msgstr ""
+#~ "Para cada NOME, o caminho completo do comando é determinado e lembrado."
+
+#~ msgid "remembered.  If the -p option is supplied, PATHNAME is used as the"
+#~ msgstr ""
+#~ "Se a opção -p for fornecida, CAMINHO é utilizado como o caminho completo"
+
+#~ msgid "full pathname of NAME, and no path search is performed.  The -r"
+#~ msgstr "para NOME, e nenhuma procura de caminho é realizada.  A opção -r"
+
+#~ msgid "option causes the shell to forget all remembered locations.  If no"
+#~ msgstr ""
+#~ "faz com que a shell esqueça todas as localizações lembradas.  Sem nenhum"
+
+#~ msgid ""
+#~ "arguments are given, information about remembered commands is displayed."
+#~ msgstr "argumento, as informações sobre os comandos lembrados são exibidas."
+
+#~ msgid "Display helpful information about builtin commands.  If PATTERN is"
+#~ msgstr "Exibe informações úteis sobre os comandos internos. Se PADRÃO for"
+
+#~ msgid "specified, gives detailed help on all commands matching PATTERN,"
+#~ msgstr "especificado, fornece ajuda detalhada para todos os comandos que"
+
+#~ msgid "otherwise a list of the builtins is printed."
+#~ msgstr ""
+#~ "correspondem ao PADRÃO, senão a lista dos comandos internos é exibida."
+
+#~ msgid "Display the history list with line numbers.  Lines listed with"
+#~ msgstr ""
+#~ "Exibe a lista histórica com os números das linhas. Linhas contendo um"
+
+#~ msgid "with a `*' have been modified.  Argument of N says to list only"
+#~ msgstr "`*' foram modificadas.  O argumento N faz listar somente as últimas"
+
+#~ msgid "the last N lines.  The -c option causes the history list to be"
+#~ msgstr "N linhas.  A opção -c faz com que a lista histórica seja apagada"
+
+#~ msgid ""
+#~ "cleared by deleting all of the entries.  The `-w' option writes out the"
+#~ msgstr ""
+#~ "removendo todas as entradas.  A opção `-w' escreve o histórico atual no"
+
+#~ msgid ""
+#~ "current history to the history file;  `-r' means to read the file and"
+#~ msgstr ""
+#~ "arquivo de histórico;  A opção `-r' significa ler o arquivo e apensar seu"
+
+#~ msgid "append the contents to the history list instead.  `-a' means"
+#~ msgstr ""
+#~ "conteúdo à lista histórica.  A opção `-a' significa apensar as linhas de"
+
+#~ msgid "to append history lines from this session to the history file."
+#~ msgstr "histórico desta sessão ao arquivo de histórico."
+
+#~ msgid "Argument `-n' means to read all history lines not already read"
+#~ msgstr "A opção `-n' faz ler todas as linhas de histórico ainda não lidas"
+
+#~ msgid "from the history file and append them to the history list.  If"
+#~ msgstr ""
+#~ "do arquivo histórico, e apensá-las à lista de histórico.  Se ARQUIVO"
+
+#~ msgid "FILENAME is given, then that is used as the history file else"
+#~ msgstr "for fornecido, então este é usado como arquivo de histórico, senão"
+
+#~ msgid "if $HISTFILE has a value, that is used, else ~/.bash_history."
+#~ msgstr ""
+#~ "se $HISTFILE possui valor, este é usado, senão ~/.bash_history.  Se a"
+
+#~ msgid "If the -s option is supplied, the non-option ARGs are appended to"
+#~ msgstr ""
+#~ "opção -s for fornecida, os ARGs, que não forem opções, são apensados à"
+
+#~ msgid "the history list as a single entry.  The -p option means to perform"
+#~ msgstr ""
+#~ "lista histórica como uma única entrada. A opção -p significa realizar a"
+
+#~ msgid ""
+#~ "history expansion on each ARG and display the result, without storing"
+#~ msgstr ""
+#~ "expansão da história em cada ARG e exibir o resultado, sem armazenar"
+
+#~ msgid "anything in the history list."
+#~ msgstr "nada na lista de histórico."
+
+#~ msgid "Lists the active jobs.  The -l option lists process id's in addition"
+#~ msgstr ""
+#~ "Lista os trabalhos ativos.  A opção -l lista os ID's dos processos além"
+
+#~ msgid "to the normal information; the -p option lists process id's only."
+#~ msgstr ""
+#~ "das informações usuais;  a opção -p lista somente os ID's dos processos."
+
+#~ msgid ""
+#~ "If -n is given, only processes that have changed status since the last"
+#~ msgstr ""
+#~ "Se -n for fornecido, somente os processos que mudaram de status desde a"
+
+#~ msgid ""
+#~ "notification are printed.  JOBSPEC restricts output to that job.  The"
+#~ msgstr ""
+#~ "última notificação são exibidos.  JOB-ESPECIFICADO restringe a saída a "
+#~ "este"
+
+#~ msgid "-r and -s options restrict output to running and stopped jobs only,"
+#~ msgstr ""
+#~ "trabalho.  As opções -r e -s restringem a saída apenas aos trabalhos"
+
+#~ msgid "respectively.  Without options, the status of all active jobs is"
+#~ msgstr ""
+#~ "executando e parados, respectivamente.  Sem opções, o status de todos os"
+
+#~ msgid ""
+#~ "printed.  If -x is given, COMMAND is run after all job specifications"
+#~ msgstr ""
+#~ "trabalhos ativos são exibidos.  Se -x for fornecido, COMANDO é executado"
+
+#~ msgid ""
+#~ "that appear in ARGS have been replaced with the process ID of that job's"
+#~ msgstr ""
+#~ "após todas as especificações de trabalho que aparecem em ARGS terem sido"
+
+#~ msgid "process group leader."
+#~ msgstr "substituídas pelo ID do processo líder deste grupo de processos."
+
+#~ msgid "Removes each JOBSPEC argument from the table of active jobs."
+#~ msgstr ""
+#~ "Remove cada argumento JOB-ESPECIFICADO da tabela de trabalhos ativos."
+
+#~ msgid "Send the processes named by PID (or JOB) the signal SIGSPEC.  If"
+#~ msgstr ""
+#~ "Envia ao processo identificado pelo PID (ou JOB) o sinal SIGSPEC.  Se"
+
+#~ msgid ""
+#~ "SIGSPEC is not present, then SIGTERM is assumed.  An argument of `-l'"
+#~ msgstr ""
+#~ "SIGSPEC não estiver presente, então SIGTERM é assumido.  A opção `-l'"
+
+#~ msgid "lists the signal names; if arguments follow `-l' they are assumed to"
+#~ msgstr ""
+#~ "lista os nomes dos sinais;  havendo argumentos após `-l', são assumidos"
+
+#~ msgid "be signal numbers for which names should be listed.  Kill is a shell"
+#~ msgstr ""
+#~ "como sendo os números dos sinais cujos nomes devem ser exibidos.  Kill"
+
+#~ msgid "builtin for two reasons: it allows job IDs to be used instead of"
+#~ msgstr ""
+#~ "é um comando interno por duas razões: permite o uso do ID do trabalho em"
+
+#~ msgid "process IDs, and, if you have reached the limit on processes that"
+#~ msgstr ""
+#~ "vez do ID do processo e, caso tenha sido atingido o limite de processos "
+#~ "que"
+
+#~ msgid ""
+#~ "you can create, you don't have to start a process to kill another one."
+#~ msgstr ""
+#~ "podem ser criados, não é necessário um novo processo para remover outro."
+
+#~ msgid "Each ARG is an arithmetic expression to be evaluated.  Evaluation"
+#~ msgstr "Cada ARG é uma expressão aritmética a ser avaliada.  A avaliação é"
+
+#~ msgid "is done in long integers with no check for overflow, though division"
+#~ msgstr ""
+#~ "feita usando inteiros longos sem verificar estouro, embora a divisão"
+
+#~ msgid "by 0 is trapped and flagged as an error.  The following list of"
+#~ msgstr "por 0 seja capturada e indicada como erro.  A lista abaixo está"
+
+#~ msgid "operators is grouped into levels of equal-precedence operators."
+#~ msgstr "grupada em níveis de igual de precedência dos operadores."
+
+#~ msgid "The levels are listed in order of decreasing precedence."
+#~ msgstr "Os níveis estão listados em ordem decrescente de precedência."
+
+#~ msgid "\t-, +\t\tunary minus, plus"
+#~ msgstr "\t-, +\t\tmenos, mais unários"
+
+#~ msgid "\t!, ~\t\tlogical and bitwise negation"
+#~ msgstr "\t!, ~\t\tnegação lógica e bit a bit"
+
+#~ msgid "\t*, /, %\t\tmultiplication, division, remainder"
+#~ msgstr "\t*, /, %\t\tmultiplicação, divisão, resto"
+
+#~ msgid "\t+, -\t\taddition, subtraction"
+#~ msgstr "\t+, -\t\tadição, subtração"
+
+#~ msgid "\t<<, >>\t\tleft and right bitwise shifts"
+#~ msgstr "\t<<, >>\t\tdeslocamento à esquerda e à direita bit a bit"
+
+#~ msgid "\t<=, >=, <, >\tcomparison"
+#~ msgstr "\t<=, >=, <, >\tcomparação"
+
+#~ msgid "\t==, !=\t\tequality, inequality"
+#~ msgstr "\t==, !=\t\tigualdade, desigualdade"
+
+#~ msgid "\t&\t\tbitwise AND"
+#~ msgstr "\t&\t\tE bit a bit"
+
+#~ msgid "\t^\t\tbitwise XOR"
+#~ msgstr "\t^\t\tOU Exclusivo (XOR) bit a bit"
+
+#~ msgid "\t|\t\tbitwise OR"
+#~ msgstr "\t|\t\tOU Inclusivo (OR) bit a bit"
+
+#~ msgid "\t&&\t\tlogical AND"
+#~ msgstr "\t&&\t\tE lógico"
+
+#~ msgid "\t||\t\tlogical OR"
+#~ msgstr "\t||\t\tOU lógico"
+
+#~ msgid "\texpr ? expr : expr"
+#~ msgstr "\texpr ? expr : expr"
+
+#~ msgid "\t\t\tconditional expression"
+#~ msgstr "\t\t\texpressão condicional"
+
+#~ msgid "\t=, *=, /=, %=,"
+#~ msgstr "\t=, *=, /=, %=,"
+
+#~ msgid "\t+=, -=, <<=, >>=,"
+#~ msgstr "\t+=, -=, <<=, >>=,"
+
+#~ msgid "\t&=, ^=, |=\tassignment"
+#~ msgstr "\t&=, ^=, |=\tatribuição"
+
+#~ msgid "is replaced by its value (coerced to a long integer) within"
+#~ msgstr "substituído pelo seu valor (convertido em inteiro longo) dentro"
+
+#~ msgid "an expression.  The variable need not have its integer attribute"
+#~ msgstr "da expressão.  A variável não precisa ter seu atributo inteiro"
+
+#~ msgid "turned on to be used in an expression."
+#~ msgstr "ativo para ser usada em uma expressão."
+
+#~ msgid "Operators are evaluated in order of precedence.  Sub-expressions in"
+#~ msgstr ""
+#~ "Os operadores são avaliados em ordem de precedência.  Sub-expressões"
+
+#~ msgid "parentheses are evaluated first and may override the precedence"
+#~ msgstr "entre parênteses são avaliadas primeiro e podem prevalecer sobre as"
+
+#~ msgid "rules above."
+#~ msgstr "regras de precedência anteriores."
+
+#~ msgid "If the last ARG evaluates to 0, let returns 1; 0 is returned"
+#~ msgstr "Se o último argumento for avaliado como 0, `let' retorna 1, caso"
+
+#~ msgid "otherwise."
+#~ msgstr "contrário, retorna 0."
+
+#~ msgid "One line is read from the standard input, and the first word is"
+#~ msgstr "Uma linha é lida a partir da entrada padrão, e a primeira palavra é"
+
+#~ msgid ""
+#~ "assigned to the first NAME, the second word to the second NAME, and so"
+#~ msgstr ""
+#~ "atribuída ao primeiro NOME, a segunda ao segundo NOME, e assim por diante,"
+
+#~ msgid ""
+#~ "on, with leftover words assigned to the last NAME.  Only the characters"
+#~ msgstr ""
+#~ "com as palavras restantes atribuídas ao último NOME.  Somente os "
+#~ "caracteres"
+
+#~ msgid "found in $IFS are recognized as word delimiters.  The return code is"
+#~ msgstr ""
+#~ "encontrados em $IFS são reconhecidos como delimitadores. O código de "
+#~ "retorno"
+
+#~ msgid ""
+#~ "zero, unless end-of-file is encountered.  If no NAMEs are supplied, the"
+#~ msgstr ""
+#~ "é zero, a menos que EOF seja encontrado.  Se nenhum NOME for fornecido,"
+
+#~ msgid ""
+#~ "line read is stored in the REPLY variable.  If the -r option is given,"
+#~ msgstr ""
+#~ "a linha lida é armazenada na variável REPLY.  Se a opção -r for fornecida,"
+
+#~ msgid "this signifies `raw' input, and backslash escaping is disabled.  If"
+#~ msgstr ""
+#~ "significa entrada `textual', desabilitando a interpretação da contrabarra."
+
+#~ msgid "the `-p' option is supplied, the string supplied as an argument is"
+#~ msgstr ""
+#~ "Se a opção `-p' for fornecida a MENSAGEM fornecida como argumento é "
+#~ "exibida,"
+
+#~ msgid ""
+#~ "output without a trailing newline before attempting to read.  If -a is"
+#~ msgstr ""
+#~ "sem o caracter de nova linha, antes de efetuar a leitura.  Se a opção -a"
+
+#~ msgid ""
+#~ "supplied, the words read are assigned to sequential indices of ARRAY,"
+#~ msgstr ""
+#~ "for fornecida, as palavras lidas são atribuídas aos índices seqüenciais"
+
+#~ msgid "starting at zero.  If -e is supplied and the shell is interactive,"
+#~ msgstr ""
+#~ "do ARRAY, começando por zero.  Se a opção -e for fornecida, e a shell for"
+
+#~ msgid "readline is used to obtain the line."
+#~ msgstr "interativa, `readline' é utilizado para ler a linha."
+
+#~ msgid ""
+#~ "Causes a function to exit with the return value specified by N.  If N"
+#~ msgstr "Faz a função terminar com o valor de retorno especificado por N."
+
+#~ msgid "is omitted, the return status is that of the last command."
+#~ msgstr "Se N for omitido, retorna o status do último comando executado."
+
+#~ msgid "    -a  Mark variables which are modified or created for export."
+#~ msgstr ""
+#~ "    -a  Marcar para exportação as variáveis que são criadas ou "
+#~ "modificadas."
+
+#~ msgid "    -b  Notify of job termination immediately."
+#~ msgstr "    -b  Notificar imediatamente o término do trabalho."
+
+#~ msgid "    -e  Exit immediately if a command exits with a non-zero status."
+#~ msgstr ""
+#~ "    -e  Terminar imediatamente se um comando terminar com status != 0."
+
+#~ msgid "    -f  Disable file name generation (globbing)."
+#~ msgstr "    -f  Desabilitar a geração de nome de arquivo (metacaracteres)."
+
+#~ msgid "    -h  Remember the location of commands as they are looked up."
+#~ msgstr "    -h  Lembrar da localização dos comandos ao procurá-los."
+
+#~ msgid ""
+#~ "    -i  Force the shell to be an \"interactive\" one.  Interactive shells"
+#~ msgstr "    -i  Forçar a shell ser do tipo \"interativa\".  `Shells'"
+
+#~ msgid "        always read `~/.bashrc' on startup."
+#~ msgstr "        interativas sempre lêem `~/.bashrc' ao iniciar."
+
+#~ msgid "    -k  All assignment arguments are placed in the environment for a"
+#~ msgstr ""
+#~ "    -k  Todos os argumentos de atribuição são colocados no ambiente,"
+
+#~ msgid "        command, not just those that precede the command name."
+#~ msgstr "        e não somente os que precedem o nome do comando."
+
+#~ msgid "    -m  Job control is enabled."
+#~ msgstr "    -m  O controle de trabalho está habilitado."
+
+#~ msgid "    -n  Read commands but do not execute them."
+#~ msgstr "    -n  Ler os comandos, mas não executá-los."
+
+#~ msgid "    -o option-name"
+#~ msgstr "    -o NOME-DA-OPÇÃO"
+
+#~ msgid "        Set the variable corresponding to option-name:"
+#~ msgstr "        Inicializar a variável correspondente ao nome da opção:"
+
+#~ msgid "            allexport    same as -a"
+#~ msgstr "            allexport    o mesmo que -a"
+
+#~ msgid "            braceexpand  same as -B"
+#~ msgstr "            braceexpand  o mesmo que -B"
+
+#~ msgid "            emacs        use an emacs-style line editing interface"
+#~ msgstr ""
+#~ "            emacs        usar interface de edição de linha estilo emacs"
+
+#~ msgid "            errexit      same as -e"
+#~ msgstr "            errexit      o mesmo que -e"
+
+#~ msgid "            hashall      same as -h"
+#~ msgstr "            hashall      o mesmo que -h"
+
+#~ msgid "            histexpand   same as -H"
+#~ msgstr "            histexpand   o mesmo que -H"
+
+#~ msgid "            ignoreeof    the shell will not exit upon reading EOF"
+#~ msgstr "            ignoreeof    a shell não termina após ler EOF"
+
+#~ msgid "            interactive-comments"
+#~ msgstr "            interactive-comments"
+
+#~ msgid ""
+#~ "                         allow comments to appear in interactive commands"
+#~ msgstr ""
+#~ "                         permite comentários em comandos interativos"
+
+#~ msgid "            keyword      same as -k"
+#~ msgstr "            keyword      o mesmo que -k"
+
+#~ msgid "            monitor      same as -m"
+#~ msgstr "            monitor      o mesmo que -m"
+
+#~ msgid "            noclobber    same as -C"
+#~ msgstr "            noclobber    o mesmo que -C"
+
+#~ msgid "            noexec       same as -n"
+#~ msgstr "            noexec       o mesmo que -n"
+
+#~ msgid "            noglob       same as -f"
+#~ msgstr "            noglob       o mesmo que -f"
+
+#~ msgid "            notify       save as -b"
+#~ msgstr "            notify       o mesmo que -b"
+
+#~ msgid "            nounset      same as -u"
+#~ msgstr "            nounset      o mesmo que -u"
+
+#~ msgid "            onecmd       same as -t"
+#~ msgstr "            onecmd       o mesmo que -t"
+
+#~ msgid "            physical     same as -P"
+#~ msgstr "            physical     o mesmo que -P"
+
+#~ msgid ""
+#~ "            posix        change the behavior of bash where the default"
+#~ msgstr ""
+#~ "            posix        mudar o comportamento do `bash' onde o padrão"
+
+#~ msgid ""
+#~ "                         operation differs from the 1003.2 standard to"
+#~ msgstr ""
+#~ "                         for diferente do padrão 1003.2, para tornar"
+
+#~ msgid "                         match the standard"
+#~ msgstr "                         igual ao padrão"
+
+#~ msgid "            privileged   same as -p"
+#~ msgstr "            privileged   o mesmo que -p"
+
+#~ msgid "            verbose      same as -v"
+#~ msgstr "            verbose      o mesmo que -v"
+
+#~ msgid "            vi           use a vi-style line editing interface"
+#~ msgstr ""
+#~ "            vi           usar interface de edição de linha estilo vi"
+
+#~ msgid "            xtrace       same as -x"
+#~ msgstr "            xtrace       o mesmo que -x"
+
+#~ msgid ""
+#~ "    -p  Turned on whenever the real and effective user ids do not match."
+#~ msgstr ""
+#~ "    -p  Habilitado sempre que o usuário real e efetivo forem diferentes."
+
+#~ msgid "        Disables processing of the $ENV file and importing of shell"
+#~ msgstr ""
+#~ "        Desabilita o processamento do arquivo $ENV e importação das "
+#~ "funções"
+
+#~ msgid ""
+#~ "        functions.  Turning this option off causes the effective uid and"
+#~ msgstr ""
+#~ "        da shell.  Desabilitando esta opção faz com que o `uid' e `gid'"
+
+#~ msgid "        gid to be set to the real uid and gid."
+#~ msgstr "        efetivos sejam feitos o mesmo que o `uid' e `gid' reais."
+
+#~ msgid "    -t  Exit after reading and executing one command."
+#~ msgstr "    -t  Sair após ler e executar um comando."
+
+#~ msgid "    -u  Treat unset variables as an error when substituting."
+#~ msgstr ""
+#~ "    -u  Tratar como erro as variáveis não inicializadas na substituição."
+
+#~ msgid "    -v  Print shell input lines as they are read."
+#~ msgstr "    -v  Exibir as linhas de entrada da shell ao lê-las."
+
+#~ msgid "    -x  Print commands and their arguments as they are executed."
+#~ msgstr "    -x  Exibir os comandos e seus argumentos ao executá-los."
+
+#~ msgid "    -B  the shell will perform brace expansion"
+#~ msgstr "    -B  a shell irá realizar a expansão das chaves {}"
+
+#~ msgid "    -H  Enable ! style history substitution.  This flag is on"
+#~ msgstr "    -H  Habilitar o estilo ! para substituição do histórico."
+
+#~ msgid "        by default."
+#~ msgstr "        Esta opção está ativa por padrão."
+
+#~ msgid "    -C  If set, disallow existing regular files to be overwritten"
+#~ msgstr "    -C  Não permite que arquivos regulares existentes sejam"
+
+#~ msgid "        by redirection of output."
+#~ msgstr "        sobrescritos pelo redirecionamento da saída."
+
+#~ msgid "    -P  If set, do not follow symbolic links when executing commands"
+#~ msgstr "    -P  Não seguir os vínculos simbólicos ao executar comandos,"
+
+#~ msgid "        such as cd which change the current directory."
+#~ msgstr "        tais como `cd', que troca o diretório atual."
+
+#~ msgid "Using + rather than - causes these flags to be turned off.  The"
+#~ msgstr "Usando + em vez de - faz com que as opções sejam desabilitadas. As"
+
+#~ msgid "flags can also be used upon invocation of the shell.  The current"
+#~ msgstr ""
+#~ "opções também podem ser usadas na chamada da shell.  O conjunto atual"
+
+#~ msgid ""
+#~ "set of flags may be found in $-.  The remaining n ARGs are positional"
+#~ msgstr ""
+#~ "de opções pode ser encontrado em $-. Os n ARGs restantes são parâmetros"
+
+#~ msgid "parameters and are assigned, in order, to $1, $2, .. $n.  If no"
+#~ msgstr "posicionais e são atribuídos, em ordem, a $1, $2, .. $n.  Se nenhum"
+
+#~ msgid "ARGs are given, all shell variables are printed."
+#~ msgstr "ARG for fornecido, todas as variáveis da shell são exibidas."
+
+#~ msgid "For each NAME, remove the corresponding variable or function.  Given"
+#~ msgstr ""
+#~ "Para cada NOME, remove a variável ou a função correspondente.  Usando-se a"
+
+#~ msgid "the `-v', unset will only act on variables.  Given the `-f' flag,"
+#~ msgstr ""
+#~ "opção `-v', `unset' atua somente nas variáveis.  Usando-se a opção `-f'"
+
+#~ msgid "unset will only act on functions.  With neither flag, unset first"
+#~ msgstr "`unset' atua somente nas funções.  Sem nenhuma opção, inicialmente"
+
+#~ msgid "tries to unset a variable, and if that fails, then tries to unset a"
+#~ msgstr "`unset' tenta remover uma variável e, se falhar, tenta remover uma"
+
+#~ msgid ""
+#~ "function.  Some variables (such as PATH and IFS) cannot be unset; also"
+#~ msgstr ""
+#~ "função.  Algumas variáveis (como PATH e IFS) não podem ser removidas."
+
+#~ msgid "see readonly."
+#~ msgstr "Veja também o comando `readonly'."
+
+#~ msgid "NAMEs are marked for automatic export to the environment of"
+#~ msgstr ""
+#~ "NOMEs são marcados para serem automaticamente exportados para o ambiente"
+
+#~ msgid "subsequently executed commands.  If the -f option is given,"
+#~ msgstr "dos comando executados a seguir.  Se a opção -f for fornecida,"
+
+#~ msgid "the NAMEs refer to functions.  If no NAMEs are given, or if `-p'"
+#~ msgstr ""
+#~ "os NOMEs se referem a funções.  Se nenhum nome for fornecido, ou se `-p'"
+
+#~ msgid "is given, a list of all names that are exported in this shell is"
+#~ msgstr ""
+#~ "for usado, uma lista com todos os nomes que são exportados nesta shell é"
+
+#~ msgid "printed.  An argument of `-n' says to remove the export property"
+#~ msgstr ""
+#~ "exibida.  O argumento `-n' faz remover a propriedade de exportação dos"
+
+#~ msgid "from subsequent NAMEs.  An argument of `--' disables further option"
+#~ msgstr "NOMEs subseqüentes.  O argumento `--' desabilita o processamento de"
+
+#~ msgid "processing."
+#~ msgstr "opções posteriores."
+
+#~ msgid ""
+#~ "The given NAMEs are marked readonly and the values of these NAMEs may"
+#~ msgstr ""
+#~ "Os NOMEs são marcados como somente para leitura, e os valores destes"
+
+#~ msgid "not be changed by subsequent assignment.  If the -f option is given,"
+#~ msgstr ""
+#~ "NOMEs não poderão ser alterados por novas atribuições.  Se a opção -f for"
+
+#~ msgid "then functions corresponding to the NAMEs are so marked.  If no"
+#~ msgstr ""
+#~ "fornecida, as funções correspondentes a NOMEs também são marcadas.  Sem"
+
+#~ msgid ""
+#~ "arguments are given, or if `-p' is given, a list of all readonly names"
+#~ msgstr ""
+#~ "nenhum argumento, ou se `-p' for usado, uma lista com todos os nomes"
+
+#~ msgid ""
+#~ "is printed.  An argument of `-n' says to remove the readonly property"
+#~ msgstr ""
+#~ "somente para leitura é exibida.  O argumento `-n' remove a propriedade"
+
+#~ msgid "from subsequent NAMEs.  The `-a' option means to treat each NAME as"
+#~ msgstr "somente para leitura.  A opção `-a' faz tratar cada NOME como uma"
+
+#~ msgid "an array variable.  An argument of `--' disables further option"
+#~ msgstr ""
+#~ "variável tipo array.  Um argumento `--' desabilita o processamento de"
+
+#~ msgid ""
+#~ "The positional parameters from $N+1 ... are renamed to $1 ...  If N is"
+#~ msgstr ""
+#~ "Os parâmetros posicionais a partir de $N+1 ... são deslocados para $1 ..."
+
+#~ msgid "not given, it is assumed to be 1."
+#~ msgstr "Se N não for especificado, o valor 1 é assumido ($2 vira $1 ...)."
+
+#~ msgid "Read and execute commands from FILENAME and return.  The pathnames"
+#~ msgstr "Ler e executar os comandos em ARQUIVO e retornar.  Os caminhos em"
+
+#~ msgid "in $PATH are used to find the directory containing FILENAME."
+#~ msgstr "$PATH são usados para encontrar o diretório contendo o ARQUIVO."
+
+#~ msgid "Suspend the execution of this shell until it receives a SIGCONT"
+#~ msgstr ""
+#~ "Suspender a execução desta shell até que o sinal SIGCONT seja recebido."
+
+#~ msgid "signal.  The `-f' if specified says not to complain about this"
+#~ msgstr "Se a opção `-f' for especificada indica para não reclamar sobre ser"
+
+#~ msgid "being a login shell if it is; just suspend anyway."
+#~ msgstr ""
+#~ "uma `shell de login', caso seja; simplesmente suspender de qualquer forma."
+
+#~ msgid "Exits with a status of 0 (trueness) or 1 (falseness) depending on"
+#~ msgstr ""
+#~ "Termina com status 0 (verdadeiro) ou 1 (falso) conforme EXPR for avaliada."
+
+#~ msgid "the evaluation of EXPR.  Expressions may be unary or binary.  Unary"
+#~ msgstr ""
+#~ "As expressões podem ser unárias ou binárias. As expressões unárias são"
+
+#~ msgid "expressions are often used to examine the status of a file.  There"
+#~ msgstr ""
+#~ "muito usadas para examinar o status de um arquivo.  Existem, também,"
+
+#~ msgid "are string operators as well, and numeric comparison operators."
+#~ msgstr ""
+#~ "operadores para cadeias de caracteres (strings) e comparações numéricas."
+
+#~ msgid "File operators:"
+#~ msgstr "Operadores para arquivos:"
+
+#~ msgid "    -b FILE        True if file is block special."
+#~ msgstr "    -b ARQUIVO  Verdade se o arquivo for do tipo especial de bloco."
+
+#~ msgid "    -c FILE        True if file is character special."
+#~ msgstr ""
+#~ "    -c ARQUIVO  Verdade se o arquivo for do tipo especial de caracter."
+
+#~ msgid "    -d FILE        True if file is a directory."
+#~ msgstr "    -d ARQUIVO  Verdade se o arquivo for um diretório."
+
+#~ msgid "    -e FILE        True if file exists."
+#~ msgstr "    -e ARQUIVO  Verdade se o arquivo existir."
+
+#~ msgid "    -f FILE        True if file exists and is a regular file."
+#~ msgstr "    -f ARQUIVO  Verdade se o arquivo existir e for do tipo regular."
+
+#~ msgid "    -g FILE        True if file is set-group-id."
+#~ msgstr ""
+#~ "    -g ARQUIVO  Verdade se o arquivo tiver o bit \"set-group-id\" ativo."
+
+#~ msgid "    -h FILE        True if file is a symbolic link.  Use \"-L\"."
+#~ msgstr ""
+#~ "    -h ARQUIVO  Verdade se arquivo for um vínculo simbólico.  Usar \"-L\"."
+
+#~ msgid "    -L FILE        True if file is a symbolic link."
+#~ msgstr "    -L ARQUIVO  Verdade se o arquivo for um vínculo simbólico."
+
+#~ msgid "    -k FILE        True if file has its \"sticky\" bit set."
+#~ msgstr "    -k ARQUIVO  Verdade se o arquivo tiver o bit \"sticky\" ativo."
+
+#~ msgid "    -p FILE        True if file is a named pipe."
+#~ msgstr "    -p ARQUIVO  Verdade se o arquivo for um `named pipe'."
+
+#~ msgid "    -r FILE        True if file is readable by you."
+#~ msgstr ""
+#~ "    -r ARQUIVO  Verdade se você tiver autorização para ler o arquivo."
+
+#~ msgid "    -s FILE        True if file exists and is not empty."
+#~ msgstr "    -s ARQUIVO  Verdade se o arquivo existir e não estiver vazio."
+
+#~ msgid "    -S FILE        True if file is a socket."
+#~ msgstr "    -S ARQUIVO  Verdade se o arquivo for um soquete."
+
+#~ msgid "    -t FD          True if FD is opened on a terminal."
+#~ msgstr ""
+#~ "    -t FD       Verdade se o descritor de arquivo (FD) estiver aberto\n"
+#~ "                    em um terminal."
+
+#~ msgid "    -u FILE        True if the file is set-user-id."
+#~ msgstr ""
+#~ "    -u ARQUIVO  Verdade se o arquivo tiver o bit \"set-user-id\" ativo."
+
+#~ msgid "    -w FILE        True if the file is writable by you."
+#~ msgstr ""
+#~ "    -w ARQUIVO  Verdade se você tiver autorização para escrever no "
+#~ "arquivo."
+
+#~ msgid "    -x FILE        True if the file is executable by you."
+#~ msgstr ""
+#~ "    -x ARQUIVO  Verdade se você tiver autorização para executar o arquivo."
+
+#~ msgid "    -O FILE        True if the file is effectively owned by you."
+#~ msgstr ""
+#~ "    -O ARQUIVO  Verdade se o arquivo pertencer ao seu usuário efetivo."
+
+#~ msgid ""
+#~ "    -G FILE        True if the file is effectively owned by your group."
+#~ msgstr ""
+#~ "    -G ARQUIVO  Verdade se o arquivo pertencer ao seu grupo efetivo."
+
+#~ msgid "  FILE1 -nt FILE2  True if file1 is newer than (according to"
+#~ msgstr "  ARQ1 -nt ARQ2 Verdade se ARQ1 for mais novo (conforme a data"
+
+#~ msgid "                   modification date) file2."
+#~ msgstr "                de modificação) do que ARQ2."
+
+#~ msgid "  FILE1 -ot FILE2  True if file1 is older than file2."
+#~ msgstr "  ARQ1 -ot ARQ2 Verdade se ARQ1 for mais antigo que ARQ2."
+
+#~ msgid "  FILE1 -ef FILE2  True if file1 is a hard link to file2."
+#~ msgstr ""
+#~ "  ARQ1 -ef ARQ2 Verdade se ARQ1 for um vínculo direto para ARQ2.\n"
+#~ "                    (mesma unidade e mesmo número do inode)"
+
+#~ msgid "String operators:"
+#~ msgstr "Operadores para cadeias de caracteres (strings):"
+
+#~ msgid "    -z STRING      True if string is empty."
+#~ msgstr "    -z STRING   Verdade se STRING estiver vazia."
+
+#~ msgid "    -n STRING"
+#~ msgstr "    -n STRING"
+
+#~ msgid "    STRING         True if string is not empty."
+#~ msgstr "    STRING      Verdade se STRING não estiver vazia."
+
+#~ msgid "    STRING1 = STRING2"
+#~ msgstr "    STRING1 = STRING2"
+
+#~ msgid "                   True if the strings are equal."
+#~ msgstr "                Verdade se STRING1 for idêntica à STRING2."
+
+#~ msgid "    STRING1 != STRING2"
+#~ msgstr "    STRING1 != STRING2"
+
+#~ msgid "                   True if the strings are not equal."
+#~ msgstr "                Verdade se STRING1 não for idêntica à STRING2."
+
+#~ msgid "    STRING1 < STRING2"
+#~ msgstr "    STRING1 < STRING2"
+
+#~ msgid ""
+#~ "                   True if STRING1 sorts before STRING2 lexicographically"
+#~ msgstr ""
+#~ "                Verdade se STRING1 tiver ordenação anterior à STRING2."
+
+#~ msgid "    STRING1 > STRING2"
+#~ msgstr "    STRING1 > STRING2"
+
+#~ msgid ""
+#~ "                   True if STRING1 sorts after STRING2 lexicographically"
+#~ msgstr ""
+#~ "                Verdade se STRING1 tiver ordenação posterior à STRING2."
+
+#~ msgid "Other operators:"
+#~ msgstr "Outros operadores:"
+
+#~ msgid "    ! EXPR         True if expr is false."
+#~ msgstr "    ! EXPR         Verdade se a expressão EXPR for falsa."
+
+#~ msgid "    EXPR1 -a EXPR2 True if both expr1 AND expr2 are true."
+#~ msgstr "    EXPR1 -a EXPR2 Verdade se EXPR1 `E' EXPR2 forem verdadeiras."
+
+#~ msgid "    EXPR1 -o EXPR2 True if either expr1 OR expr2 is true."
+#~ msgstr "    EXPR1 -o EXPR2 Verdade se EXPR1 `OU' EXPR2 for verdadeira."
+
+#~ msgid "    arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,"
+#~ msgstr "    arg1 OP arg2   Testes aritméticos.  OP pode ser -eq, -ne,"
+
+#~ msgid "                   -lt, -le, -gt, or -ge."
+#~ msgstr "                   -lt, -le, -gt, ou -ge."
+
+#~ msgid "Arithmetic binary operators return true if ARG1 is equal, not-equal,"
+#~ msgstr ""
+#~ "Operadores aritméticos binários retornam verdadeiro se ARG1 for igual,"
+
+#~ msgid ""
+#~ "less-than, less-than-or-equal, greater-than, or greater-than-or-equal"
+#~ msgstr "diferente, menor, menor ou igual, maior, ou maior ou igual do que"
+
+#~ msgid "than ARG2."
+#~ msgstr "ARG2, respectivamente."
+
+#~ msgid "This is a synonym for the \"test\" builtin, but the last"
+#~ msgstr "É um sinônimo para o comando interno \"test\", mas o último"
+
+#~ msgid "argument must be a literal `]', to match the opening `['."
+#~ msgstr "argumento deve ser o literal `]', para fechar o `[' de abertura."
+
+#~ msgid "Print the accumulated user and system times for processes run from"
+#~ msgstr ""
+#~ "Exibe os tempos acumulados do usuário e do sistema para os processos"
+
+#~ msgid "the shell."
+#~ msgstr "executados por esta shell."
+
+#~ msgid "The command ARG is to be read and executed when the shell receives"
+#~ msgstr ""
+#~ "O comando em ARG é para ser lido e executado quando a shell receber o(s)"
+
+#~ msgid "signal(s) SIGNAL_SPEC.  If ARG is absent all specified signals are"
+#~ msgstr ""
+#~ "sinal(is) SINAL-ESPEC.  Se ARG for omitido, todos os sinais especificados"
+
+#~ msgid "reset to their original values.  If ARG is the null string each"
+#~ msgstr ""
+#~ "retornam aos seus valores originais.  Se ARG for uma string nula, cada"
+
+#~ msgid "SIGNAL_SPEC is ignored by the shell and by the commands it invokes."
+#~ msgstr ""
+#~ "SINAL-ESPEC é ignorado pela shell e pelos comandos chamados por ela."
+
+#~ msgid "If SIGNAL_SPEC is EXIT (0) the command ARG is executed on exit from"
+#~ msgstr ""
+#~ "Se SINAL-ESPEC for EXIT (0) o comando em ARG é executado na saída da"
+
+#~ msgid "the shell.  If SIGNAL_SPEC is DEBUG, ARG is executed after every"
+#~ msgstr ""
+#~ "shell.  Se SINAL-ESPEC for DEBUG, o comando em ARG é executado após cada"
+
+#~ msgid "command.  If ARG is `-p' then the trap commands associated with"
+#~ msgstr ""
+#~ "comando.  Se ARG for `-p' então os comandos de captura associados com cada"
+
+#~ msgid "each SIGNAL_SPEC are displayed.  If no arguments are supplied or if"
+#~ msgstr "SINAL-ESPEC são exibidos.  Se nenhum argumento for fornecido, ou se"
+
+#~ msgid "only `-p' is given, trap prints the list of commands associated with"
+#~ msgstr ""
+#~ "somente `-p' for fornecido, é exibida a lista dos comandos associados"
+
+#~ msgid ""
+#~ "each signal number.  SIGNAL_SPEC is either a signal name in <signal.h>"
+#~ msgstr ""
+#~ "com cada número de sinal.  SINAL-ESPEC é um nome de sinal em <signal.h> ou"
+
+#~ msgid ""
+#~ "or a signal number.  `trap -l' prints a list of signal names and their"
+#~ msgstr ""
+#~ "um número de sinal.  `trap -l' exibe a lista de nomes de sinais com seus"
+
+#~ msgid "corresponding numbers.  Note that a signal can be sent to the shell"
+#~ msgstr ""
+#~ "números correspondentes.  Note que o sinal pode ser enviado para a shell"
+
+#~ msgid "with \"kill -signal $$\"."
+#~ msgstr "através do comando \"kill -SINAL $$\"."
+
+#~ msgid "For each NAME, indicate how it would be interpreted if used as a"
+#~ msgstr "Para cada NOME, indica como este deve ser interpretado caso seja"
+
+#~ msgid "If the -t option is used, returns a single word which is one of"
+#~ msgstr ""
+#~ "Se a opção -t for fornecida, `type' retorna uma única palavra dentre"
+
+#~ msgid ""
+#~ "`alias', `keyword', `function', `builtin', `file' or `', if NAME is an"
+#~ msgstr ""
+#~ "`alias', `keyword', `function', `builtin', `file' ou `', se NOME for um"
+
+#~ msgid ""
+#~ "alias, shell reserved word, shell function, shell builtin, disk file,"
+#~ msgstr ""
+#~ "alias, uma palavra reservada, função ou comando interno da shell, um "
+#~ "arquivo"
+
+#~ msgid "or unfound, respectively."
+#~ msgstr "em disco, ou não for encontrado, respectivamente."
+
+#~ msgid "If the -p flag is used, either returns the name of the disk file"
+#~ msgstr "Se a opção -p for fornecida, retorna o nome do arquivo em disco que"
+
+#~ msgid "that would be executed, or nothing if -t would not return `file'."
+#~ msgstr "deve ser executado, ou nada, caso -t não retorne `file'."
+
+#~ msgid "If the -a flag is used, displays all of the places that contain an"
+#~ msgstr "Se a opção -a for fornecida, exibe todos os locais que contém um"
+
+#~ msgid ""
+#~ "executable named `file'.  This includes aliases and functions, if and"
+#~ msgstr ""
+#~ "arquivo executável chamado `ARQUIVO', incluindo os aliases e funções,"
+
+#~ msgid "only if the -p flag is not also used."
+#~ msgstr "mas somente se a opção -p não for fornecida conjuntamente."
+
+#~ msgid "Type accepts -all, -path, and -type in place of -a, -p, and -t,"
+#~ msgstr "O comando `type' aceita -all, -path, e -type no lugar de"
+
+#~ msgid "respectively."
+#~ msgstr "-a, -p, and -t, respectivamente."
+
+#~ msgid "Ulimit provides control over the resources available to processes"
+#~ msgstr ""
+#~ "Ulimit estabelece controle sobre os recursos disponíveis para os processos"
+
+#~ msgid "started by the shell, on systems that allow such control.  If an"
+#~ msgstr ""
+#~ "iniciados por esta shell, em sistemas que permitem estes controles. Se uma"
+
+#~ msgid "option is given, it is interpreted as follows:"
+#~ msgstr "opção for fornecida, é interpretada como mostrado a seguir:"
+
+#~ msgid "    -S\tuse the `soft' resource limit"
+#~ msgstr "    -S\tutilizar os limites correntes (`soft') dos recursos"
+
+#~ msgid "    -H\tuse the `hard' resource limit"
+#~ msgstr "    -H\tutilizar os limites absolutos (`hard') dos recursos"
+
+#~ msgid "    -a\tall current limits are reported"
+#~ msgstr "    -a\ttodos os limites correntes são informados"
+
+#~ msgid "    -c\tthe maximum size of core files created"
+#~ msgstr ""
+#~ "    -c\to tamanho máximo para os arquivos de imagem do núcleo criados"
+
+#~ msgid "    -d\tthe maximum size of a process's data segment"
+#~ msgstr "    -d\to tamanho máximo do segmento de dados de um processo"
+
+#~ msgid "    -m\tthe maximum resident set size"
+#~ msgstr ""
+#~ "    -m\to tamanho máximo do conjunto de processos residentes em memória"
+
+#~ msgid "    -s\tthe maximum stack size"
+#~ msgstr "    -s\to tamanho máximo da pilha"
+
+#~ msgid "    -t\tthe maximum amount of cpu time in seconds"
+#~ msgstr "    -t\ta quantidade máxima de tempo de CPU em segundos"
+
+#~ msgid "    -f\tthe maximum size of files created by the shell"
+#~ msgstr "    -f\to tamanho máximo dos arquivos criados pela shell"
+
+#~ msgid "    -p\tthe pipe buffer size"
+#~ msgstr "    -p\to tamanho da área intermediária (buffer) do `pipe'"
+
+#~ msgid "    -n\tthe maximum number of open file descriptors"
+#~ msgstr "    -n\to número máximo de descritores de arquivos abertos"
+
+#~ msgid "    -u\tthe maximum number of user processes"
+#~ msgstr "    -u\to número máximo de processos do usuário"
+
+#~ msgid "    -v\tthe size of virtual memory"
+#~ msgstr "    -v\to tamanho da memória virtual"
+
+#~ msgid "If LIMIT is given, it is the new value of the specified resource."
+#~ msgstr ""
+#~ "Se LIMITE for fornecido, torna-se o novo valor do recurso especificado."
+
+#~ msgid "Otherwise, the current value of the specified resource is printed."
+#~ msgstr "Senão, o valor atual do recurso especificado é exibido."
+
+#~ msgid "If no option is given, then -f is assumed.  Values are in 1k"
+#~ msgstr ""
+#~ "Se nenhuma opção for fornecida, então -f é assumido. Os valores são em"
+
+#~ msgid "increments, except for -t, which is in seconds, -p, which is in"
+#~ msgstr "incrementos de 1k, exceto para -t, que é em segundos, -p, que é em"
+
+#~ msgid "increments of 512 bytes, and -u, which is an unscaled number of"
+#~ msgstr "incrementos de 512 bytes, e -u, que é o número cardinal de"
+
+#~ msgid "processes."
+#~ msgstr "processos."
+
+#~ msgid ""
+#~ "The user file-creation mask is set to MODE.  If MODE is omitted, or if"
+#~ msgstr ""
+#~ "MODO é atribuído à máscara de criação de arquivos do usuário.  Se omitido,"
+
+#~ msgid ""
+#~ "`-S' is supplied, the current value of the mask is printed.  The `-S'"
+#~ msgstr ""
+#~ "ou se `-S' for especificado, a máscara em uso é exibida.  A opção `-S'"
+
+#~ msgid ""
+#~ "option makes the output symbolic; otherwise an octal number is output."
+#~ msgstr "exibe símbolos na saída; sem esta opção um número octal é exibido."
+
+#~ msgid "If MODE begins with a digit, it is interpreted as an octal number,"
+#~ msgstr ""
+#~ "Se MODO começar por um dígito, é interpretado como sendo um número octal,"
+
+#~ msgid ""
+#~ "otherwise it is a symbolic mode string like that accepted by chmod(1)."
+#~ msgstr ""
+#~ "senão devem ser caracteres simbólicos, como os aceitos por chmod(1)."
+
+#~ msgid ""
+#~ "Wait for the specified process and report its termination status.  If"
+#~ msgstr ""
+#~ "Aguardar pelo processo especificado e informar seu status de término. Se N"
+
+#~ msgid "N is not given, all currently active child processes are waited for,"
+#~ msgstr ""
+#~ "não for especificado, todos os processos filhos ativos são aguardados,"
+
+#~ msgid "and the return code is zero.  N may be a process ID or a job"
+#~ msgstr "e o código de retorno é zero.  N pode ser o ID de um processo ou a"
+
+#~ msgid "specification; if a job spec is given, all processes in the job's"
+#~ msgstr ""
+#~ "especificação de um trabalho; Se for a especificação de um trabalho, todos"
+
+#~ msgid "pipeline are waited for."
+#~ msgstr "os processos presentes no `pipeline' do trabalho são aguardados."
+
+#~ msgid "and the return code is zero.  N is a process ID; if it is not given,"
+#~ msgstr ""
+#~ "e o código de retorno é zero.  N é o ID de um processo; se N não for"
+
+#~ msgid "all child processes of the shell are waited for."
+#~ msgstr "especificado, todos os processos filhos da shell são aguardados."
+
+#~ msgid "The `for' loop executes a sequence of commands for each member in a"
+#~ msgstr ""
+#~ "O laço `for' executa a seqüência de comandos para cada membro na lista de"
+
+#~ msgid ""
+#~ "list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is"
+#~ msgstr ""
+#~ "items.  Se `in PALAVRAS ...;' não estiver presente, então `in \"$@\"'"
+
+#~ msgid ""
+#~ "assumed.  For each element in WORDS, NAME is set to that element, and"
+#~ msgstr ""
+#~ "(parâmetros posicionais) é assumido. Para cada elemento em PALAVRAS, NOME"
+
+#~ msgid "the COMMANDS are executed."
+#~ msgstr "assume seu valor, e os COMANDOS são executados."
+
+#~ msgid "The WORDS are expanded, generating a list of words.  The"
+#~ msgstr ""
+#~ "As palavras são expandidas, gerando uma lista de palavras. O conjunto"
+
+#~ msgid "set of expanded words is printed on the standard error, each"
+#~ msgstr ""
+#~ "de palavras expandidas é enviado para a saída de erro padrão, cada uma"
+
+#~ msgid "preceded by a number.  If `in WORDS' is not present, `in \"$@\"'"
+#~ msgstr ""
+#~ "precedida por um número.  Se `in PALAVRAS' for omitido, `in \"$@\"' é"
+
+#~ msgid "is assumed.  The PS3 prompt is then displayed and a line read"
+#~ msgstr "assumido.  Em seguida o prompt PS3 é exibido, e uma linha é lida da"
+
+#~ msgid "from the standard input.  If the line consists of the number"
+#~ msgstr ""
+#~ "entrada padrão.  Se a linha consistir do número correspondente ao número"
+
+#~ msgid "corresponding to one of the displayed words, then NAME is set"
+#~ msgstr "de uma das palavras exibidas, então NOME é atribuído para esta"
+
+#~ msgid "to that word.  If the line is empty, WORDS and the prompt are"
+#~ msgstr ""
+#~ "PALAVRA.  Se a linha estiver vazia, PALAVRAS e o prompt são exibidos"
+
+#~ msgid "redisplayed.  If EOF is read, the command completes.  Any other"
+#~ msgstr ""
+#~ "novamente.  Se EOF for lido, o comando termina.  Qualquer outro valor"
+
+#~ msgid "value read causes NAME to be set to null.  The line read is saved"
+#~ msgstr "lido faz com que NOME seja tornado nulo.  A linha lida é salva"
+
+#~ msgid "in the variable REPLY.  COMMANDS are executed after each selection"
+#~ msgstr "na variável REPLY.  COMANDOS são executados após cada seleção"
+
+#~ msgid "until a break or return command is executed."
+#~ msgstr "até que o comando `break' ou `return' seja executado."
+
+#~ msgid "Selectively execute COMMANDS based upon WORD matching PATTERN.  The"
+#~ msgstr ""
+#~ "Executar seletivamente COMANDOS tomando por base a correspondência entre"
+
+#~ msgid "`|' is used to separate multiple patterns."
+#~ msgstr ""
+#~ "PALAVRA e PADRÃO. O caracter `|' é usado para separar múltiplos padrões."
+
+#~ msgid ""
+#~ "The if COMMANDS are executed.  If the exit status is zero, then the then"
+#~ msgstr ""
+#~ "Os COMANDOS `if' são executados. Se os status de saída for zero, então os"
+
+#~ msgid ""
+#~ "COMMANDS are executed.  Otherwise, each of the elif COMMANDS are executed"
+#~ msgstr ""
+#~ "COMANDOS `then' são executados, senão, os COMANDOS `elif' são executados "
+#~ "em"
+
+#~ msgid ""
+#~ "in turn, and if the exit status is zero, the corresponding then COMMANDS"
+#~ msgstr ""
+#~ "seqüência e, se o status de saída for zero, os COMANDOS `then' associados"
+
+#~ msgid ""
+#~ "are executed and the if command completes.  Otherwise, the else COMMANDS"
+#~ msgstr ""
+#~ "são executados e o `if' termina.  Senão, os COMANDOS da cláusula `else'"
+
+#~ msgid ""
+#~ "are executed, if present.  The exit status is the exit status of the last"
+#~ msgstr ""
+#~ "são executados, se houver.  O status de saída é o status de saída do"
+
+#~ msgid "command executed, or zero if no condition tested true."
+#~ msgstr ""
+#~ "último comando executado, ou zero, se nenhuma condição for verdadeira."
+
+#~ msgid "Expand and execute COMMANDS as long as the final command in the"
+#~ msgstr "Expande e executa COMANDOS enquanto o comando final nos"
+
+#~ msgid "`while' COMMANDS has an exit status of zero."
+#~ msgstr "COMANDOS `while' tiver um status de saída igual a zero."
+
+#~ msgid "`until' COMMANDS has an exit status which is not zero."
+#~ msgstr "COMANDOS `until' tiver um status de saída diferente de zero."
+
+#~ msgid "Create a simple command invoked by NAME which runs COMMANDS."
+#~ msgstr "Cria um comando chamado NOME o qual executa COMANDOS."
+
+#~ msgid "Arguments on the command line along with NAME are passed to the"
+#~ msgstr "Os argumentos na linha de comando juntamente com NOME são passados"
+
+#~ msgid "function as $0 .. $n."
+#~ msgstr "para a função como $0 .. $n."
+
+#~ msgid "Run a set of commands in a group.  This is one way to redirect an"
+#~ msgstr "Executa um conjunto de comandos agrupando-os.  Esta é uma forma de"
+
+#~ msgid "entire set of commands."
+#~ msgstr "redirecionar todo um conjunto de comandos."
+
+#~ msgid "This is similar to the `fg' command.  Resume a stopped or background"
+#~ msgstr ""
+#~ "Semelhante ao comando `fg'. Prossegue a execução de um trabalho parado ou"
+
+#~ msgid "job.  If you specifiy DIGITS, then that job is used.  If you specify"
+#~ msgstr ""
+#~ "em segundo plano. Se D�GITOS for especificado, então este trabalho é "
+#~ "usado."
+
+#~ msgid ""
+#~ "WORD, then the job whose name begins with WORD is used.  Following the"
+#~ msgstr ""
+#~ "Se for especificado PALAVRA, o trabalho começado por PALAVRA é usado."
+
+#~ msgid "job specification with a `&' places the job in the background."
+#~ msgstr ""
+#~ "Seguindo-se a especificação por um `&' põe o trabalho em segundo plano."
+
+#~ msgid "BASH_VERSION    The version numbers of this Bash."
+#~ msgstr "BASH_VERSION    Os números da versão desta `bash'."
+
+#~ msgid "CDPATH          A colon separated list of directories to search"
+#~ msgstr "CDPATH          Uma lista, separada por dois pontos, de diretórios"
+
+#~ msgid "\t\twhen the argument to `cd' is not found in the current"
+#~ msgstr "\t\ta serem pesquisados quando o argumento para `cd' não for"
+
+#~ msgid "\t\tdirectory."
+#~ msgstr "\t\tencontrado no diretório atual."
+
+#~ msgid ""
+#~ "HISTFILE        The name of the file where your command history is stored."
+#~ msgstr ""
+#~ "HISTFILE        O nome do arquivo onde o histórico de comandos é "
+#~ "armazenado."
+
+#~ msgid "HISTFILESIZE    The maximum number of lines this file can contain."
+#~ msgstr ""
+#~ "HISTFILESIZE    O número máximo de linhas que este arquivo pode conter."
+
+#~ msgid "HISTSIZE        The maximum number of history lines that a running"
+#~ msgstr "HISTSIZE        O número máximo de linhas do histórico que uma"
+
+#~ msgid "\t\tshell can access."
+#~ msgstr "\t\tshell em execução pode acessar."
+
+#~ msgid "HOME            The complete pathname to your login directory."
+#~ msgstr ""
+#~ "HOME            O nome completo do caminho do seu diretório de login."
+
+#~ msgid ""
+#~ "HOSTTYPE        The type of CPU this version of Bash is running under."
+#~ msgstr ""
+#~ "HOSTTYPE        O tipo de CPU sob a qual esta `bash' está executando."
+
+#~ msgid ""
+#~ "IGNOREEOF       Controls the action of the shell on receipt of an EOF"
+#~ msgstr "IGNOREEOF       Controla a ação da shell ao receber um caracter"
+
+#~ msgid "\t\tcharacter as the sole input.  If set, then the value"
+#~ msgstr "\t\tEOF como única entrada.  Se estiver ativa, então o valor da"
+
+#~ msgid "\t\tof it is the number of EOF characters that can be seen"
+#~ msgstr "\t\tvariável é o número de caracteres EOF que podem ser recebidos,"
+
+#~ msgid "\t\tin a row on an empty line before the shell will exit"
+#~ msgstr "\t\tde forma seguida em uma linha vazia, antes da shell terminar"
+
+#~ msgid "\t\t(default 10).  When unset, EOF signifies the end of input."
+#~ msgstr ""
+#~ "\t\t(padrão 10).  Caso contrário, EOF significa o fim da entrada de dados."
+
+#~ msgid "MAILCHECK\tHow often, in seconds, Bash checks for new mail."
+#~ msgstr ""
+#~ "MAILCHECK\tFreqüência, em segundos, para a `bash' verificar novo e-mail."
+
+#~ msgid "MAILPATH\tA colon-separated list of filenames which Bash checks"
+#~ msgstr ""
+#~ "MAILPATH\tUma lista, separada por dois pontos, de nomes de arquivos,"
+
+#~ msgid "\t\tfor new mail."
+#~ msgstr "\t\tnos quais a `bash' vai verificar se existe novo e-mail."
+
+#~ msgid "OSTYPE\t\tThe version of Unix this version of Bash is running on."
+#~ msgstr "OSTYPE\t\tA versão do Unix sob a qual a `bash' está executando."
+
+#~ msgid "PATH            A colon-separated list of directories to search when"
+#~ msgstr ""
+#~ "PATH            Uma lista, separada por dois pontos, de diretórios a"
+
+#~ msgid "\t\tlooking for commands."
+#~ msgstr "\t\tserem pesquisados quando os comandos forem procurados."
+
+#~ msgid "PROMPT_COMMAND  A command to be executed before the printing of each"
+#~ msgstr "PROMPT_COMMAND  O comando a ser executado antes da exibição de cada"
+
+#~ msgid "\t\tprimary prompt."
+#~ msgstr "\t\tmensagem de prompt primária."
+
+#~ msgid "PS1             The primary prompt string."
+#~ msgstr "PS1             A mensagem primária de prompt exibida."
+
+#~ msgid "PS2             The secondary prompt string."
+#~ msgstr "PS2             A mensagem secundária de prompt exibida."
+
+#~ msgid "TERM            The name of the current terminal type."
+#~ msgstr "TERM            O nome do tipo de terminal em uso no momento."
+
+#~ msgid "auto_resume     Non-null means a command word appearing on a line by"
+#~ msgstr ""
+#~ "auto_resume     Não nulo significa que um comando aparecendo sozinho em"
+
+#~ msgid "\t\titself is first looked for in the list of currently"
+#~ msgstr ""
+#~ "\t\tlinha deve ser procurado primeiro na lista de trabalhos parados."
+
+#~ msgid "\t\tstopped jobs.  If found there, that job is foregrounded."
+#~ msgstr ""
+#~ "\t\tSe for encontrado na lista, o trabalho vai para o primeiro plano."
+
+#~ msgid "\t\tA value of `exact' means that the command word must"
+#~ msgstr ""
+#~ "\t\tO valor `exact' significa que a palavra do comando deve corresponder"
+
+#~ msgid "\t\texactly match a command in the list of stopped jobs.  A"
+#~ msgstr "\t\texatamente a um comando da lista de trabalhos parados."
+
+#~ msgid "\t\tvalue of `substring' means that the command word must"
+#~ msgstr "\t\tO valor `substring' significa que a palavra do comando deve"
+
+#~ msgid "\t\tmatch a substring of the job.  Any other value means that"
+#~ msgstr "\t\tcorresponder a uma parte do trabalho.  Qualquer outro valor"
+
+#~ msgid "\t\tthe command must be a prefix of a stopped job."
+#~ msgstr ""
+#~ "\t\tsignifica que o comando deve ser um prefixo de um trabalho parado."
+
+#~ msgid "command_oriented_history"
+#~ msgstr "command_oriented_history"
+
+#~ msgid ""
+#~ "                Non-null means to save multiple-line commands together on"
+#~ msgstr ""
+#~ "                Se não for nulo significa salvar comandos com múltiplas"
+
+#~ msgid "                a single history line."
+#~ msgstr "                linhas, juntas em uma única linha do histórico."
+
+#~ msgid "histchars       Characters controlling history expansion and quick"
+#~ msgstr ""
+#~ "histchars       Caracteres que controlam a expansão do histórico e a"
+
+#~ msgid "\t\tsubstitution.  The first character is the history"
+#~ msgstr "\t\tsubstituição rápida.  O primeiro caracter é o de substituição"
+
+#~ msgid "\t\tsubstitution character, usually `!'.  The second is"
+#~ msgstr "\t\tdo histórico, geralmente o `!'.  O segundo caracter é o"
+
+#~ msgid "\t\tthe `quick substitution' character, usually `^'.  The"
+#~ msgstr "\t\tde substituição rápida, geralmente o `^'.  O terceiro caracter"
+
+#~ msgid "\t\tthird is the `history comment' character, usually `#'."
+#~ msgstr "\t\té o de comentário do histórico, geralmente o `#'."
+
+#~ msgid "HISTCONTROL\tSet to a value of `ignorespace', it means don't enter"
+#~ msgstr ""
+#~ "HISTCONTROL\tCom valor igual a `ignorespace', significa não introduzir"
+
+#~ msgid "\t\tlines which begin with a space or tab on the history"
+#~ msgstr ""
+#~ "\t\tlinhas que iniciam por espaço ou tabulação na lista de histórico."
+
+#~ msgid "\t\tlist.  Set to a value of `ignoredups', it means don't"
+#~ msgstr "\t\tCom valor igual a `ignoredups', significa não introduzir linhas"
+
+#~ msgid "\t\tenter lines which match the last entered line.  Set to"
+#~ msgstr "\t\tque correspondam à última linha introduzida.  Com valor igual a"
+
+#~ msgid "\t\t`ignoreboth' means to combine the two options.  Unset,"
+#~ msgstr "\t\t`ignoreboth' significa combinar as duas opções.  Remover,"
+
+#~ msgid "\t\tor set to any other value than those above means to save"
+#~ msgstr ""
+#~ "\t\tou atribuir algum outro valor que não os acima, significa salvar"
+
+#~ msgid "\t\tall lines on the history list."
+#~ msgstr "\t\ttodas as linhas na lista de histórico."
+
+#~ msgid "Adds a directory to the top of the directory stack, or rotates"
+#~ msgstr "Adiciona o diretório no topo da pilha de diretórios, ou rotaciona a"
+
+#~ msgid "the stack, making the new top of the stack the current working"
+#~ msgstr ""
+#~ "pilha, fazendo o diretório atual de trabalho ficar no topo da pilha."
+
+#~ msgid "directory.  With no arguments, exchanges the top two directories."
+#~ msgstr "Sem nenhum argumento, troca os dois diretórios do topo."
+
+#~ msgid "+N\tRotates the stack so that the Nth directory (counting"
+#~ msgstr ""
+#~ "+N\tRotaciona a pilha de tal forma que o n-ésimo diretório (contado a"
+
+#~ msgid "\tfrom the left of the list shown by `dirs') is at the top."
+#~ msgstr "\tpartir da esquerda da lista exibida por `dirs') fique no topo."
+
+#~ msgid "-N\tRotates the stack so that the Nth directory (counting"
+#~ msgstr ""
+#~ "-N\tRotaciona a pilha de tal forma que o n-ésimo diretório (contado a"
+
+#~ msgid "\tfrom the right) is at the top."
+#~ msgstr "\tpartir da direita) fique no topo."
+
+#~ msgid "-n\tsuppress the normal change of directory when adding directories"
+#~ msgstr "-n\tsuprime a troca normal de diretório ao se adicionar diretórios"
+
+#~ msgid "\tto the stack, so only the stack is manipulated."
+#~ msgstr "\tà pilha, fazendo com que somente a pilha seja manipulada."
+
+#~ msgid "dir\tadds DIR to the directory stack at the top, making it the"
+#~ msgstr "dir\tadiciona DIR à pilha de diretórios, no topo, tornando-o o"
+
+#~ msgid "You can see the directory stack with the `dirs' command."
+#~ msgstr "Você pode exibir a pilha de diretórios através do comando `dirs'."
+
+#~ msgid "Removes entries from the directory stack.  With no arguments,"
+#~ msgstr "Remove entradas da pilha de diretórios.  Sem nenhum argumento,"
+
+#~ msgid "removes the top directory from the stack, and cd's to the new"
+#~ msgstr "remove o diretório que está no topo da pilha, e executa `cd' para"
+
+#~ msgid "+N\tremoves the Nth entry counting from the left of the list"
+#~ msgstr "+N\tremove a n-ésima entrada contada a partir da esquerda da lista"
+
+#~ msgid "\tshown by `dirs', starting with zero.  For example: `popd +0'"
+#~ msgstr "\texibida por `dirs', começando por zero.  Por exemplo: `popd +0'"
+
+#~ msgid "\tremoves the first directory, `popd +1' the second."
+#~ msgstr "\tremove o primeiro diretório, `popd +1' o segundo."
+
+#~ msgid "-N\tremoves the Nth entry counting from the right of the list"
+#~ msgstr "-N\tremove a n-ésima entrada contada a partir da direita da lista"
+
+#~ msgid "\tshown by `dirs', starting with zero.  For example: `popd -0'"
+#~ msgstr "\texibida por `dirs', começando por zero.  Por exemplo: `popd -0'"
+
+#~ msgid "\tremoves the last directory, `popd -1' the next to last."
+#~ msgstr "\tremove o último diretório, `popd -1' o penúltimo."
+
+#~ msgid ""
+#~ "-n\tsuppress the normal change of directory when removing directories"
+#~ msgstr "-n\tsuprime a troca normal de diretório ao remover-se diretórios"
+
+#~ msgid "\tfrom the stack, so only the stack is manipulated."
+#~ msgstr "\tda pilha, fazendo com que somente a pilha seja manipulada."
+
+#~ msgid "Display the list of currently remembered directories.  Directories"
+#~ msgstr "Exibe a lista atual de diretórios memorizados. Os diretórios são"
+
+#~ msgid "find their way onto the list with the `pushd' command; you can get"
+#~ msgstr "introduzidos na lista através do comando `pushd'; os diretórios são"
+
+#~ msgid "back up through the list with the `popd' command."
+#~ msgstr "removidos da lista através do comando `popd'."
+
+#~ msgid ""
+#~ "The -l flag specifies that `dirs' should not print shorthand versions"
+#~ msgstr "A opção -l especifica que `dirs' não deve exibir a versão resumida"
+
+#~ msgid ""
+#~ "of directories which are relative to your home directory.  This means"
+#~ msgstr ""
+#~ "dos diretórios relativos ao seu diretório `home'. Isto significa que"
+
+#~ msgid "that `~/bin' might be displayed as `/homes/bfox/bin'.  The -v flag"
+#~ msgstr ""
+#~ "`~/bin' deve ser exibido como `/home/você/bin'.  A opção -v faz com que"
+
+#~ msgid "causes `dirs' to print the directory stack with one entry per line,"
+#~ msgstr "`dirs' exiba a pilha de diretórios com uma entrada por linha,"
+
+#~ msgid ""
+#~ "prepending the directory name with its position in the stack.  The -p"
+#~ msgstr "antecedendo o nome do diretório com a sua posição na pilha. A opção"
+
+#~ msgid "flag does the same thing, but the stack position is not prepended."
+#~ msgstr "-p faz a mesma coisa, mas a posição na pilha não é exibida. A opção"
+
+#~ msgid ""
+#~ "The -c flag clears the directory stack by deleting all of the elements."
+#~ msgstr "-c limpa a pilha de diretórios apagando todos os seus elementos."
+
+#~ msgid ""
+#~ "+N\tdisplays the Nth entry counting from the left of the list shown by"
+#~ msgstr ""
+#~ "+N\texibe a n-ésima entrada contada a partir da esquerda da lista exibida"
+
+#~ msgid "\tdirs when invoked without options, starting with zero."
+#~ msgstr "\tpor `dirs', quando este é chamado sem opções, começando por zero."
+
+#~ msgid ""
+#~ "-N\tdisplays the Nth entry counting from the right of the list shown by"
+#~ msgstr ""
+#~ "-N\texibe a n-ésima entrada contada a partir da direita da lista exibida"
+
+#~ msgid "Toggle the values of variables controlling optional behavior."
+#~ msgstr ""
+#~ "Alterna os valores das variáveis controladoras de comportamentos "
+#~ "opcionais."
+
+#~ msgid "The -s flag means to enable (set) each OPTNAME; the -u flag"
+#~ msgstr "A opção -s ativa (set) cada NOME-OPÇÃO; a opção -u desativa cada"
+
+#~ msgid "unsets each OPTNAME.  The -q flag suppresses output; the exit"
+#~ msgstr ""
+#~ "NOME-OPÇÃO. A opção -q suprime a saída; o status de término indica se"
+
+#~ msgid "status indicates whether each OPTNAME is set or unset.  The -o"
+#~ msgstr "cada NOME-OPÇÃO foi ativado ou desativado  A opção -o restringe"
+
+#~ msgid "option restricts the OPTNAMEs to those defined for use with"
+#~ msgstr "NOME-OPÇÃO para aqueles definidos para uso através de `set -o'."
+
+#~ msgid "`set -o'.  With no options, or with the -p option, a list of all"
+#~ msgstr "Sem nenhuma opção, ou com a opção -p, uma lista com todas as"
+
+#~ msgid "settable options is displayed, with an indication of whether or"
+#~ msgstr ""
+#~ "opções que podem ser ativadas é exibida, com indicação sobre se cada uma"
+
+#~ msgid "not each is set."
+#~ msgstr "das opções está ativa ou não."
diff --git a/po/quot.sed b/po/quot.sed
new file mode 100644
index 0000000..0122c46
--- /dev/null
+++ b/po/quot.sed
@@ -0,0 +1,6 @@
+s/"\([^"]*\)"/“\1�/g
+s/`\([^`']*\)'/‘\1’/g
+s/ '\([^`']*\)' / ‘\1’ /g
+s/ '\([^`']*\)'$/ ‘\1’/g
+s/^'\([^`']*\)' /‘\1’ /g
+s/“�/""/g
diff --git a/po/remove-potcdate.sin b/po/remove-potcdate.sin
new file mode 100644
index 0000000..2436c49
--- /dev/null
+++ b/po/remove-potcdate.sin
@@ -0,0 +1,19 @@
+# Sed script that remove the POT-Creation-Date line in the header entry
+# from a POT file.
+#
+# The distinction between the first and the following occurrences of the
+# pattern is achieved by looking at the hold space.
+/^"POT-Creation-Date: .*"$/{
+x
+# Test if the hold space is empty.
+s/P/P/
+ta
+# Yes it was empty. First occurrence. Remove the line.
+g
+d
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
diff --git a/po/ro.gmo b/po/ro.gmo
new file mode 100644
index 0000000..3a69a47
--- /dev/null
+++ b/po/ro.gmo
diff --git a/po/ro.po b/po/ro.po
new file mode 100644
index 0000000..13ab354
--- /dev/null
+++ b/po/ro.po
@@ -0,0 +1,6747 @@
+# Mesajele în limba română pentru pachetul bash
+# Copyright (C) 2003 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+# Eugen Hoanca <eugenh@urban-grafx.ro>, 2003.
+# Daniel Șerbănescu <daniel@serbanescu.dk>, 2019.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: bash 5.0\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2019-08-25 10:11+0200\n"
+"Last-Translator: Daniel Șerbănescu <daniel@serbanescu.dk>\n"
+"Language-Team: Romanian <translation-team-ro@lists.sourceforge.net>\n"
+"Language: ro\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n==0 || (n!=1 && n%100>=1 && n"
+"%100<=19) ? 1 : 2);\n"
+"X-Generator: Poedit 2.2.3\n"
+"X-Poedit-SourceCharset: UTF-8\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "incluziune greșită în interval"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr ""
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr ""
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr ""
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: nu se poate atribui către index ne-numeric"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr ""
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: nu s-a putut crea: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr ""
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr ""
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr ""
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: lipsește separatorul două puncte"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "%s: comandă negăsită"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr ""
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr ""
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr ""
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "„%s�: nume alias nevalid"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "sfârșitul de linie nu este activat"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr ""
+
+#: builtins/bind.def:252
+#, fuzzy, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: nu s-a putut crea: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, fuzzy, c-format
+msgid "`%s': unknown function name"
+msgstr "%s: funcție doar în citire (readonly)"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s nu este asociat niciunei taste.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s poate fi invocat prin "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, fuzzy, c-format
+msgid "`%s': cannot unbind"
+msgstr "%s: comandă negăsită"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "contor buclă"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "are sens numai într-o buclă „for�, „while� sau „until�"
+
+#: builtins/caller.def:136
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "HOME nu este stabilit"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "prea mulți parametri"
+
+#: builtins/cd.def:342
+msgid "null directory"
+msgstr "director null"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "OLDPWD nu este stabilit"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "linia %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "avertizare: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: utilizare: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: opțiunea necesită un parametru"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: argument numeric necesar"
+
+#: builtins/common.c:207
+#, fuzzy, c-format
+msgid "%s: not found"
+msgstr "%s: comandă negăsită"
+
+#: builtins/common.c:216 shell.c:857
+#, fuzzy, c-format
+msgid "%s: invalid option"
+msgstr "%c%c: opțiune invalidă"
+
+#: builtins/common.c:223
+#, fuzzy, c-format
+msgid "%s: invalid option name"
+msgstr "%c%c: opțiune invalidă"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, fuzzy, c-format
+msgid "`%s': not a valid identifier"
+msgstr "`%s' nu este un identificator valid"
+
+#: builtins/common.c:240
+#, fuzzy
+msgid "invalid octal number"
+msgstr "număr de semnal invalid"
+
+#: builtins/common.c:242
+#, fuzzy
+msgid "invalid hex number"
+msgstr "număr de semnal invalid"
+
+#: builtins/common.c:244 expr.c:1569
+#, fuzzy
+msgid "invalid number"
+msgstr "număr de semnal invalid"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr ""
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr ""
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: variabilă doar în citire"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr ""
+
+#: builtins/common.c:274 builtins/common.c:276
+#, fuzzy
+msgid "argument"
+msgstr "se așteaptă parametru"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr ""
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr ""
+
+#: builtins/common.c:292
+#, fuzzy, c-format
+msgid "%s: no job control"
+msgstr "nici un control de job în acest shell"
+
+#: builtins/common.c:294
+#, fuzzy
+msgid "no job control"
+msgstr "nici un control de job în acest shell"
+
+#: builtins/common.c:304
+#, fuzzy, c-format
+msgid "%s: restricted"
+msgstr "%s: jobul a fost terminat"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr ""
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr ""
+
+#: builtins/common.c:323
+#, fuzzy, c-format
+msgid "write error: %s"
+msgstr "eroare de legătură (pipe): %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr ""
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr ""
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr ""
+
+#: builtins/common.c:701 builtins/common.c:703
+#, fuzzy, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: Redirectare ambiguă"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr ""
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, fuzzy, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: nu s-a putut crea: %s"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, fuzzy, c-format
+msgid "%s: cannot unset"
+msgstr "%s: nu s-a putut crea: %s"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr ""
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr ""
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr ""
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr ""
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr ""
+
+#: builtins/declare.def:134
+#, fuzzy
+msgid "can only be used in a function"
+msgstr "poate fi folosit doar într-o funcție, și face ca variabila NUME"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr ""
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr ""
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr ""
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr ""
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr ""
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: funcție doar în citire (readonly)"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr ""
+
+#: builtins/declare.def:838
+#, fuzzy, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "$%s: nu se poate asigna în acest mod"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr ""
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr ""
+
+#: builtins/enable.def:343
+#, fuzzy, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "nu pot deschide legătura numită %s pentru %s: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr ""
+
+#: builtins/enable.def:388
+#, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr ""
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr ""
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr ""
+
+#: builtins/enable.def:543
+#, fuzzy, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: nu s-a putut crea: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: este director"
+
+#: builtins/evalfile.c:144
+#, fuzzy, c-format
+msgid "%s: not a regular file"
+msgstr "%s: nu se poate executa fișierul binar"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr ""
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: nu se poate executa fișierul binar"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, fuzzy, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: nu s-a putut crea: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "deautentificare\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr ""
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr ""
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr ""
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+#, fuzzy
+msgid "no command found"
+msgstr "%s: comandă negăsită"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr ""
+
+#: builtins/fc.def:444
+#, fuzzy, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: nu s-a putut crea: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr ""
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr ""
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: opțiune ilegală -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: opțiunea necesită un parametru: -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr ""
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr ""
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "potriviri\tcomandă\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] ""
+msgstr[1] ""
+msgstr[2] ""
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+
+#: builtins/help.def:224
+#, fuzzy, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: nu s-a putut crea: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr ""
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr ""
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr ""
+
+#: builtins/history.def:451
+#, fuzzy, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: se așteaptă expresie întreagă (integer)"
+
+#: builtins/inlib.def:71
+#, fuzzy, c-format
+msgid "%s: inlib failed"
+msgstr "%s: variabilă fără limită"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr ""
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr ""
+
+#: builtins/kill.def:274
+#, fuzzy
+msgid "Unknown error"
+msgstr "Eroare necunoscută %d"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "se așteaptă expresie"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr ""
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr ""
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr ""
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr ""
+
+#: builtins/mapfile.def:299
+#, fuzzy, c-format
+msgid "%s: invalid array origin"
+msgstr "%s:subscriere interval invalid"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr ""
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr ""
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr ""
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr ""
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr ""
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr ""
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr ""
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr ""
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr ""
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr ""
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "niciun alt director"
+
+#: builtins/pushd.def:360
+#, fuzzy, c-format
+msgid "%s: invalid argument"
+msgstr "%s necesită un parametru"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<niciun director curent>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr ""
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr ""
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr ""
+
+#: builtins/read.def:755
+#, fuzzy, c-format
+msgid "read error: %d: %s"
+msgstr "eroare de legătură (pipe): %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr ""
+
+#: builtins/set.def:869
+#, fuzzy
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "poate fi folosit doar într-o funcție, și face ca variabila NUME"
+
+#: builtins/set.def:966
+#, fuzzy, c-format
+msgid "%s: not an array variable"
+msgstr "%s: variabilă fără limită"
+
+#: builtins/setattr.def:189
+#, fuzzy, c-format
+msgid "%s: not a function"
+msgstr "%s: funcție doar în citire (readonly)"
+
+#: builtins/setattr.def:194
+#, fuzzy, c-format
+msgid "%s: cannot export"
+msgstr "%s: nu s-a putut crea: %s"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+#, fuzzy
+msgid "shift count"
+msgstr "shift [n]"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr ""
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr ""
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr ""
+
+#: builtins/source.def:154
+#, fuzzy, c-format
+msgid "%s: file not found"
+msgstr "%s: comandă negăsită"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr ""
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "nu se poate suspenda un shell de autentificare"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr ""
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr ""
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s este o funcție\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr ""
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr ""
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr ""
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr ""
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr ""
+
+#: builtins/ulimit.def:426
+#, fuzzy, c-format
+msgid "`%c': bad command"
+msgstr "%c%c: opțiune invalidă"
+
+#: builtins/ulimit.def:455
+#, fuzzy, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: nu s-a putut crea: %s"
+
+#: builtins/ulimit.def:481
+#, fuzzy
+msgid "limit"
+msgstr "limită CPU"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, fuzzy, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: nu s-a putut crea: %s"
+
+#: builtins/umask.def:115
+#, fuzzy
+msgid "octal number"
+msgstr "număr de semnal invalid"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr ""
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr ""
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr ""
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "ultima comandă: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr ""
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr ""
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "eroare de comandă necunoscută"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "tip rău de comandă"
+
+#: error.c:464
+#, fuzzy
+msgid "bad connector"
+msgstr "conector greșit `%d'"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "salt rău"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: variabilă fără limită"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\aa expirat așteptând introducerea datelor: auto-logout\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr ""
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr ""
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr ""
+
+#: execute_cmd.c:2486
+#, fuzzy
+msgid "pipe error"
+msgstr "eroare de legătură (pipe): %s"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: limitat: nu se poate specifica `/' în numele comenzilor"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: comandă negăsită"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr ""
+
+#: execute_cmd.c:5854
+#, fuzzy, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: este director"
+
+#: execute_cmd.c:5891
+#, fuzzy, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: nu se poate executa fișierul binar"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr ""
+
+#: execute_cmd.c:6029
+#, fuzzy, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "nu se poate duplica fd %d în fd 0: %s"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "nivel de recursivitate al expresiei depășit"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "stivă recursivă prea puțin folosită (underflow)"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "eroare de sintaxă în expresie"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "s-a încercat asignare către non-variabilă"
+
+#: expr.c:530
+msgid "syntax error in variable assignment"
+msgstr "eroare de sintaxă în atribuirea variabilei"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "împărțire la 0"
+
+#: expr.c:592
+#, fuzzy
+msgid "bug: bad expassign token"
+msgstr "bug: identificator(token) expassign greșit %d"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "`:' așteptat după expresie condițională"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr ""
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr ""
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "`)' lipsă"
+
+#: expr.c:1107 expr.c:1487
+#, fuzzy
+msgid "syntax error: operand expected"
+msgstr "eroare de sintaxă: sfârșit de fișier neașteptat"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr ""
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (identificatorul erorii este „%s�)"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr ""
+
+#: expr.c:1582
+msgid "invalid integer constant"
+msgstr ""
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "valoare prea mare pentru bază"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: eroare în expresie\n"
+
+#: general.c:70
+#, fuzzy
+msgid "getcwd: cannot access parent directories"
+msgstr "getwd: nu s-au putut accesa directoarele părinte"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr ""
+
+#: input.c:266
+#, fuzzy, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr ""
+"nu se poate aloca descriptor de fișier nou pentru inputul bash din fd %d: %s"
+
+#: input.c:274
+#, fuzzy, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "check_bash_input: buffer deja existent pentru fd nou %d"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr ""
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr ""
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr ""
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr ""
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: nu există un asemenea pid"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Semnal %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Finalizat"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Stopat"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Oprit(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "ÃŽn rulare"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Finalizat(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Ieșire %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Stare necunoscută"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(core dumped) "
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (wd: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "setpgid copil (de la%ld la %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, fuzzy, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "așteptați: pid-ul %d nu este rezultat(child) al acestui shell"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr ""
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr ""
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: nu s-a putut crea: %s"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: jobul a fost terminat"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr ""
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr ""
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr ""
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (core dumped)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(wd actual: %s)\n"
+
+#: jobs.c:4391
+#, fuzzy
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_jobs: getpgrp eșuat: %s"
+
+#: jobs.c:4447
+msgid "initialize_job_control: no job control in background"
+msgstr ""
+
+#: jobs.c:4463
+#, fuzzy
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_jobs: disciplină linie: %s"
+
+#: jobs.c:4473
+#, fuzzy
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_jobs: getpgrp eșuat: %s"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr ""
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "nici un control de job în acest shell"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr ""
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "necunoscut"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr ""
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr ""
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr ""
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr ""
+
+#: lib/malloc/malloc.c:1001
+msgid "free: underflow detected; magic8 corrupted"
+msgstr ""
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr ""
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr ""
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr ""
+
+#: lib/malloc/malloc.c:1141
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr ""
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr ""
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr ""
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr ""
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr ""
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr ""
+
+#: lib/sh/netopen.c:168
+#, fuzzy, c-format
+msgid "%s: host unknown"
+msgstr "necunoscut"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr ""
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr ""
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr ""
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr ""
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr ""
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr ""
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr ""
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "Aveți mail în $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "Aveți mail nou în $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "Mailul din %s a fost citit\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "eroare de sintaxă: expresie aritmetică necesară"
+
+#: make_cmd.c:319
+#, fuzzy
+msgid "syntax error: `;' unexpected"
+msgstr "eroare de sintaxă: sfârșit de fișier neașteptat"
+
+#: make_cmd.c:320
+#, fuzzy, c-format
+msgid "syntax error: `((%s))'"
+msgstr "eroare de sintaxă"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: tip de instrucțiune greșit %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr ""
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr ""
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr ""
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "EOF neașteptat în căutare după potrivirea „%c�"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "EOF neașteptat în căutare după „]]�"
+
+#: parse.y:4701
+#, fuzzy, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "eroare de sintaxă neașteptată lângă `%s'"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "eroare de sintaxă în expresia condițională"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr ""
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "se aștepta „)�"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr ""
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr ""
+
+#: parse.y:4865
+#, fuzzy, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "%s: se așteaptă operator binar"
+
+#: parse.y:4869
+#, fuzzy
+msgid "conditional binary operator expected"
+msgstr "%s: se așteaptă operator binar"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr ""
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr ""
+
+#: parse.y:4906
+#, fuzzy, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "`:' așteptat după expresie condițională"
+
+#: parse.y:4909
+#, fuzzy, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "`:' așteptat după expresie condițională"
+
+#: parse.y:4913
+#, fuzzy, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "`:' așteptat după expresie condițională"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "eroare de sintaxă neașteptată lângă `%s'"
+
+#: parse.y:6355
+#, fuzzy, c-format
+msgid "syntax error near `%s'"
+msgstr "eroare de sintaxă neașteptată lângă `%s'"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "eroare de sintaxă: sfârșit de fișier neașteptat"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "eroare de sintaxă"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Folosiți \"%s\" pentru a părăsi shellul.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "EOF neașteptat în căutare după perechea lui „)�"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr ""
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr ""
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr ""
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: conector greșitr `%d'"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr ""
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr ""
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr ""
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr ""
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr ""
+
+#: redir.c:204
+#, fuzzy, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: Redirectare ambiguă"
+
+#: redir.c:208
+#, fuzzy, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: nu se poate accesa(clobber) fișierul existent"
+
+#: redir.c:213
+#, fuzzy, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: limitat: nu se poate specifica `/' în numele comenzilor"
+
+#: redir.c:218
+#, fuzzy, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "nu pot face legătură (pipe) pentru substituția procesului: %s"
+
+#: redir.c:222
+#, fuzzy, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: nu pot asigna listă membrului intervalului"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr ""
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+#, fuzzy
+msgid "redirection error: cannot duplicate fd"
+msgstr "eroare de redirectare"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr ""
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr ""
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr ""
+
+#: shell.c:948
+#, fuzzy, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: opțiune invalidă"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr ""
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr ""
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr ""
+
+#: shell.c:1632
+#, fuzzy, c-format
+msgid "%s: Is a directory"
+msgstr "%s: este director"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "Nu am nici un nume!"
+
+#: shell.c:2035
+#, fuzzy, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU %s, versiunea %s\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Folosire:\t%s [GNU opțiune lungă] [opțiune] ...\n"
+"\t%s [GNU opțiune lungă] [opțiune] fișier script ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "Opțiuni lungi GNU:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Opțiuni ale shell-ului:\n"
+
+#: shell.c:2043
+#, fuzzy
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-irsD sau -c comandă\t\t(doar invocație)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s sau -o opțiune\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+"Apăsați `%s -c \"set-ajutor\"' pentru mai multe informații despre opțiunile "
+"shell-ului.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr ""
+"Apăsați `%s -c ajutor' pentru mai multe informații despre comenzile interne "
+"ale shell-ului.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr ""
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr ""
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr ""
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr ""
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Semnal fals"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Deconectare"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "ÃŽntrerupere"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Părăsire"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Instrucțiune ilegală"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "BPT trace/trap"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "Instrucțiune ABORT"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "Instrucțiune EMT"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Excepție virgulă mobilă"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Terminat(killed)"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Eroare de bus"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Eroare de segmentare (Segmentation fault)"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Apelare sistem invalidă"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Legătură(pipe) întreruptă"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Ceas alarmă"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Terminat"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Condiție IO urgentă"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Oprit (semnal)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Continuare"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Succesor mort sau oprit"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Oprit (tty input)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Oprit (tty output)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "I/O pregătit"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "Limită CPU"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "Limită fișier"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Alarmă (virtual)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Alarmă (profil)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Fereastră schimbată"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Reținere (lock) înregistrare"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Semnal utilizator 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Semnal utilizator 2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "Date de intrare HFT în curs de rezolvare(pending)"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "probleme electrice iminente"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "crash de sistem iminent"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "migrare proces spre alt CPU"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "eroare de programare"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "Mod monitor HFT acordat"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "Mod monitor HFT retras"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "Secvență de sunet HFT completată"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr ""
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "Semnal Necunoscut #%d"
+
+#: subst.c:1476 subst.c:1666
+#, fuzzy, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "substituție invalidă: nu există '%s' în %s"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: nu pot asigna listă membrului intervalului"
+
+#: subst.c:5910 subst.c:5926
+#, fuzzy
+msgid "cannot make pipe for process substitution"
+msgstr "nu pot face legătură (pipe) pentru substituția procesului: %s"
+
+#: subst.c:5985
+#, fuzzy
+msgid "cannot make child for process substitution"
+msgstr "nu pot crea un proces copil pentru substituirea procesului: %s"
+
+#: subst.c:6059
+#, fuzzy, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "nu pot deschide legătura numită %s pentru %s: %s"
+
+#: subst.c:6061
+#, fuzzy, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "nu pot deschide legătura numită %s pentru %s: %s"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "nu se poate duplica țeava numită %s ca fd %d"
+
+#: subst.c:6213
+#, fuzzy
+msgid "command substitution: ignored null byte in input"
+msgstr "substituție invalidă: nu există ')' de final în %s"
+
+#: subst.c:6353
+#, fuzzy
+msgid "cannot make pipe for command substitution"
+msgstr "nu pot face legături(pipes) pentru substituția de comenzi: %s"
+
+#: subst.c:6397
+#, fuzzy
+msgid "cannot make child for command substitution"
+msgstr "nu pot crea un copil pentru substituția de comenzi: %s"
+
+#: subst.c:6423
+#, fuzzy
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute: nu se poate duplica legătura (pipe) ca fd 1: %s"
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr ""
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr ""
+
+#: subst.c:7013 subst.c:7177
+#, fuzzy, c-format
+msgid "%s: invalid variable name"
+msgstr "%s: variabilă fără limită"
+
+#: subst.c:7256
+#, fuzzy, c-format
+msgid "%s: parameter not set"
+msgstr "%s: parametru null sau nesetat"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: parametru null sau nesetat"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: expresie subșir < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: substituție invalidă"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: nu se poate asigna în acest mod"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+
+#: subst.c:10367
+#, fuzzy, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "substituție invalidă: nu există ')' de final în %s"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr ""
+
+#: test.c:147
+msgid "argument expected"
+msgstr "se așteaptă parametru"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: se așteaptă expresie întreagă (integer)"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "se așteaptă `)'"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "se așteaptă `)', s-a primit %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: se așteaptă operator binar"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: se așteaptă operator unar"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "lipsește ']'"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "eroare de sintaxă: sfârșit de fișier neașteptat"
+
+#: trap.c:220
+#, fuzzy
+msgid "invalid signal number"
+msgstr "număr de semnal invalid"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr ""
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr ""
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+
+#: trap.c:487
+#, fuzzy, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: Semnal invalid %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "eroare în importarea definiției funcției pentru '%s'"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr ""
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr ""
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr ""
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr ""
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr ""
+
+#: variables.c:4771
+#, fuzzy, c-format
+msgid "%s has null exportstr"
+msgstr "%s: parametru null sau nesetat"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr ""
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr ""
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr ""
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr ""
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr ""
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr ""
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr ""
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr ""
+
+#: version.c:46 version2.c:46
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr ""
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+
+#: version.c:86 version2.c:86
+#, fuzzy, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU %s, versiunea %s\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr ""
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr ""
+
+#: xmalloc.c:93
+#, fuzzy, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "xmalloc: nu pot aloca %lu octeți (%lu octeți alocați)"
+
+#: xmalloc.c:95
+#, fuzzy, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: nu s-a putut crea: %s"
+
+#: xmalloc.c:165
+#, fuzzy, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "xmalloc: nu pot aloca %lu octeți (%lu octeți alocați)"
+
+#: xmalloc.c:167
+#, fuzzy, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: nu s-a putut crea: %s"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [nume[=valoare] ... ]"
+
+#: builtins.c:49
+#, fuzzy
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] [nume ...]"
+
+#: builtins.c:53
+#, fuzzy
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpvsPVS] [-m keymap] [-f nume_fișier] [-q nume] [-r keyseq] [keyseq:"
+"funcție readline]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [shell-builtin [arg ...]]"
+
+#: builtins.c:63
+#, fuzzy
+msgid "caller [expr]"
+msgstr "test [expr]"
+
+#: builtins.c:66
+#, fuzzy
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-PL] [dir]"
+
+#: builtins.c:68
+#, fuzzy
+msgid "pwd [-LP]"
+msgstr "pwd [-PL]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] comandă [arg ...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-afFrxi] [-p] nume[=valoare] ..."
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-afFrxi] [-p] nume[=valoare] ..."
+
+#: builtins.c:82
+#, fuzzy
+msgid "local [option] name[=value] ..."
+msgstr "local nume[=valoare] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [arg ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [arg ...]"
+
+#: builtins.c:92
+#, fuzzy
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-pnds] [-a] [-f nume_fișier] [nume ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [arg ...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts optstring nume [arg]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a nume] fișier [redirectare ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+#, fuzzy
+msgid "logout [n]"
+msgstr "logout"
+
+#: builtins.c:105
+#, fuzzy
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr "fc [-e enume] [-nlr] [prim] [u8ltim] sau fc -s [pat=rep] [cmd]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [job_spec]"
+
+#: builtins.c:113
+#, fuzzy
+msgid "bg [job_spec ...]"
+msgstr "bg [job_spec]"
+
+#: builtins.c:116
+#, fuzzy
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-r] [-p nume_cale] [nume ...]"
+
+#: builtins.c:119
+#, fuzzy
+msgid "help [-dms] [pattern ...]"
+msgstr "help [tipar ...]"
+
+#: builtins.c:123
+#, fuzzy
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [n] sau history -awrn [nume_fișier] sau history -ps arg [arg...]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [jobspec ...] sau jobs -x comandă [args]"
+
+#: builtins.c:131
+#, fuzzy
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [jobspec ...]"
+
+#: builtins.c:134
+#, fuzzy
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s sigspec | -n signum | -sigspec] [pid | job]... sau kill -l [sigspec]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let arg [arg ...]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+#, fuzzy
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [--abefhkmnptuvxBCHP] [-o opțiune] [arg ...]"
+
+#: builtins.c:144
+#, fuzzy
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [nume ...]"
+
+#: builtins.c:146
+#, fuzzy
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-nf] [nume ...] sau export -p"
+
+#: builtins.c:148
+#, fuzzy
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-anf] [nume ...] sau readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+#, fuzzy
+msgid "source filename [arguments]"
+msgstr "nume fișier sursă"
+
+#: builtins.c:154
+#, fuzzy
+msgid ". filename [arguments]"
+msgstr ". nume fișier"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [expr]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ arg... ]"
+
+#: builtins.c:166
+#, fuzzy
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [arg] [signal_spec] sau trap -l"
+
+#: builtins.c:168
+#, fuzzy
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-apt] nume [nume ...]"
+
+#: builtins.c:171
+#, fuzzy
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHacdfmstpnuv] [limită]"
+
+#: builtins.c:174
+#, fuzzy
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-S] [mod]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "echo [-n] [arg ...]"
+
+#: builtins.c:181
+#, fuzzy
+msgid "wait [pid ...]"
+msgstr "wait [n]"
+
+#: builtins.c:184
+#, fuzzy
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for NUME [în EXPRESIE ... ;] execută COMENZI; done"
+
+#: builtins.c:186
+#, fuzzy
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for NUME [în EXPRESIE ... ;] execută COMENZI; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select NUME [în EXPRESIE ... ;] execută COMENZI; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr ""
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case EXPRESIE în [TIPAR[[TIPAR]..) COMENZI ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if COMENZI; then COMENZI; [elif COMENZI; then COMENZI; ]... [ else "
+"COMENZI; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while COMENZI; do COMENZI; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until COMENZI; do COMENZI; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr ""
+
+#: builtins.c:202
+#, fuzzy
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function NUME { COMENZI ; } sau NUME () { COMENZI ; }"
+
+#: builtins.c:204
+#, fuzzy
+msgid "{ COMMANDS ; }"
+msgstr "{ COMENZI }"
+
+#: builtins.c:206
+#, fuzzy
+msgid "job_spec [&]"
+msgstr "fg [job_spec]"
+
+#: builtins.c:208
+#, fuzzy
+msgid "(( expression ))"
+msgstr "se așteaptă expresie"
+
+#: builtins.c:210
+#, fuzzy
+msgid "[[ expression ]]"
+msgstr "se așteaptă expresie"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "variabile - Numele și înțelesurile unor variabile din shell"
+
+#: builtins.c:215
+#, fuzzy
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [dir | +N | -N] [-n]"
+
+#: builtins.c:219
+#, fuzzy
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [+N | -N] [-n]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+#, fuzzy
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o opțiune lungă] nume_opt [nume_opt...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr ""
+
+#: builtins.c:231
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+
+#: builtins.c:235
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+
+#: builtins.c:239
+#, fuzzy
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "unset [-f] [-v] [nume ...]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+
+#: builtins.c:244
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+
+#: builtins.c:354
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+
+#: builtins.c:442
+#, fuzzy
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Nici un efect, comanda nu face nimic.  Un cod de ieșire zero este returnat."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+
+#: builtins.c:490
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+
+#: builtins.c:557
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+
+#: builtins.c:652
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Ieste din shell.\n"
+"    \n"
+"     Iese din shell cu starea lui N.  Dacă N este omis, starea de ieșire\n"
+"     este starea ultimei comenzi executate."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+
+#: builtins.c:1431
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+
+#: builtins.c:1502
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+
+#: builtins.c:1726
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+
+#: builtins.c:1971
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "Returnează contextul apelului subrutină curent.\n"
+#~ "   \n"
+#~ "   Fără EXPR, returnează "
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "Semnal Necunoscut #"
+
+#~ msgid "Missing `}'"
+#~ msgstr "`}' lipsă"
+
+#~ msgid "brace_expand> "
+#~ msgstr "brace_expand> "
+
+#~ msgid "Attempt to free unknown command type `%d'.\n"
+#~ msgstr "Încercare de eliberare(free) tip comandă necunoscută `%d'.\n"
+
+#~ msgid "Report this to %s\n"
+#~ msgstr "Raportaţi asta la %s\n"
+
+#~ msgid "Stopping myself..."
+#~ msgstr "Mă opresc..."
+
+#~ msgid "Tell %s to fix this someday.\n"
+#~ msgstr "Spuneţi lui %s să repare asta într-o bun zi.\n"
+
+#~ msgid "execute_command: bad command type `%d'"
+#~ msgstr "execute_command: tip de comandă greşită `%d'"
+
+#~ msgid "real\t"
+#~ msgstr "real\t"
+
+#~ msgid "user\t"
+#~ msgstr "user\t"
+
+#~ msgid "sys\t"
+#~ msgstr "sis\t"
+
+#~ msgid ""
+#~ "real\t0m0.00s\n"
+#~ "user\t0m0.00s\n"
+#~ "sys\t0m0.00s\n"
+#~ msgstr ""
+#~ "real\t0m0.00s\n"
+#~ "user\t0m0.00s\n"
+#~ "sis\t0m0.00s\n"
+
+#~ msgid "cannot duplicate fd %d to fd 1: %s"
+#~ msgstr "nu se poate duplica fd %d în fd 1: %s"
+
+#~ msgid "%s: output redirection restricted"
+#~ msgstr "%s redirectare spre output limitată"
+
+#~ msgid "Out of memory!"
+#~ msgstr "Memorie plină!"
+
+#~ msgid "You have already added item `%s'\n"
+#~ msgstr "Aţi adăugat deja elementul `%s'\n"
+
+#~ msgid "You have entered %d (%d) items.  The distribution is:\n"
+#~ msgstr "Aţi introdus %d (%d) elemente.  Distribuţia este:\n"
+
+#~ msgid "slot %3d: "
+#~ msgstr "slot %3d: "
+
+#~ msgid "<unknown>"
+#~ msgstr "<necunoscut>"
+
+#~ msgid "%s: bg background job?"
+#~ msgstr "%s: bg job din fundal?"
+
+#~ msgid ""
+#~ "Redirection instruction from yyparse () '%d' is\n"
+#~ "out of range in make_redirection ()."
+#~ msgstr ""
+#~ "Redirectare instrucţiune din yyparse () '%d' is\n"
+#~ "în afara intervalului în make_redirection ()."
+
+#~ msgid "clean_simple_command () got a command with type %d."
+#~ msgstr "clean_simple_command () a primit o comandă de tipul %d."
+
+#~ msgid "got errno %d while waiting for %d"
+#~ msgstr "s-a primit errno %d în aşteptarea lui %d"
+
+#~ msgid "syntax error near unexpected token `%c'"
+#~ msgstr "eroare de sintaxă neaşteptată lângă `%c'"
+
+#~ msgid "print_command: bad command type `%d'"
+#~ msgstr "print_command: tip comandă greşit `%d'"
+
+#~ msgid "cprintf: bad `%%' argument (%c)"
+#~ msgstr "cprintf: parametru `%%'  invalid (%c)"
+
+#~ msgid "option `%s' requires an argument"
+#~ msgstr "opţiunea `%s' necesită un parametru"
+
+#~ msgid "%s: unrecognized option"
+#~ msgstr "%s: opţiune necunoscută"
+
+#~ msgid "`-c' requires an argument"
+#~ msgstr "`-c' necesită un parametru"
+
+#~ msgid "%s: cannot execute directories"
+#~ msgstr "%s: directoarele nu se pot executa"
+
+#~ msgid "Bad code in sig.c: sigprocmask"
+#~ msgstr "Cod invalid în sig.c: sigprocmask"
+
+#~ msgid "can't make pipes for process substitution: %s"
+#~ msgstr "nu pot face legături (pipes) pentru substituţia procesului: %s"
+
+#~ msgid "reading"
+#~ msgstr "în citire"
+
+#~ msgid "writing"
+#~ msgstr "în scriere"
+
+#~ msgid "process substitution"
+#~ msgstr "substituire de proces"
+
+#~ msgid "command substitution"
+#~ msgstr "substituire de comenzi"
+
+#~ msgid "Can't reopen pipe to command substitution (fd %d): %s"
+#~ msgstr ""
+#~ "Nu se poate redeschide legătura (pipe) către substituţia de comenzi (fd "
+#~ "%d): %s"
+
+#~ msgid "$%c: unbound variable"
+#~ msgstr "$%c: variabilă fără limită"
+
+#~ msgid "%s: bad arithmetic substitution"
+#~ msgstr "%s: substituţie aritmetică greşită"
+
+#~ msgid "-%s: binary operator expected"
+#~ msgstr "-%s: se aşteaptă operator binar"
+
+#~ msgid "%s[%s: bad subscript"
+#~ msgstr "%s[%s: subsctipţie invalidă"
+
+#~ msgid "[%s: bad subscript"
+#~ msgstr "[%s: subscripţie invalidă"
+
+#~ msgid "xrealloc: cannot reallocate %lu bytes (%lu bytes allocated)"
+#~ msgstr "xrealloc: nu pot realoca %lu octeţi (%lu octeţi alocaţi)"
+
+#~ msgid "digits occur in two different argv-elements.\n"
+#~ msgstr "se regăsesc digiţi în două elemente argv diferite.\n"
+
+#~ msgid "option %c\n"
+#~ msgstr "opţiunea %c\n"
+
+#~ msgid "option a\n"
+#~ msgstr "opţiunea a\n"
+
+#~ msgid "option b\n"
+#~ msgstr "opţiunea b\n"
+
+#~ msgid "option c with value `%s'\n"
+#~ msgstr "opţiunea c cu valoarea '%s'\n"
+
+#~ msgid "?? sh_getopt returned character code 0%o ??\n"
+#~ msgstr "?? sh_getopt a returnat codul de caracter 0%o ??\n"
+
+#~ msgid "non-option ARGV-elements: "
+#~ msgstr "elemente ARGV fără opţiuni: "
+
+#~ msgid "%s: Unknown flag %s.\n"
+#~ msgstr "%s: Marcaj (flag) necunoscut %s.\n"
+
+#~ msgid "Unknown directive `%s'"
+#~ msgstr "Directivă necunoscută '%s'"
+
+#~ msgid "%s must be inside of a $BUILTIN block"
+#~ msgstr "%s trebuie sa fie înăuntrul unui bloc $BUILTIN"
+
+#~ msgid "%s found before $END"
+#~ msgstr "s-a găsit %s înainte de $END"
+
+#~ msgid "%s already has a function (%s)"
+#~ msgstr "%s avea deja o funcţie (%s)"
+
+#~ msgid "%s already had a docname (%s)"
+#~ msgstr "%s avea deja un docname (%s)"
+
+#~ msgid "%s already has short documentation (%s)"
+#~ msgstr "%s are deja documentaţie scurtă (%s)"
+
+#~ msgid "%s already has a %s definition"
+#~ msgstr "%s are deja o definiţie %s"
+
+#~ msgid "mkbuiltins: Out of virtual memory!\n"
+#~ msgstr "mkbuiltins: Memorie virtuală plină!\n"
+
+#~ msgid ":"
+#~ msgstr ":"
+
+#~ msgid "read [-r] [-p prompt] [-a array] [-e] [name ...]"
+#~ msgstr "read [-r] [-p prompt] [-a interval] [-e] [nume ...]"
+
+#~ msgid "times"
+#~ msgstr "ori"
+
+#~ msgid "%[DIGITS | WORD] [&]"
+#~ msgstr "%[DIGIŢI | CUVÂNT] [&]"
+
+#~ msgid "variables - Some variable names and meanings"
+#~ msgstr "variabile - Câteva nume de variabile şi ce înseamnă"
+
+#~ msgid "`alias' with no arguments or with the -p option prints the list"
+#~ msgstr "`alias' fără parametri  sau cu opţiunea -p printează lista"
+
+#~ msgid "of aliases in the form alias NAME=VALUE on standard output."
+#~ msgstr "aliasurilor în forma alias NUME=VALOARE la ieşirea standard"
+
+#~ msgid "Otherwise, an alias is defined for each NAME whose VALUE is given."
+#~ msgstr ""
+#~ "În caz contrar, aliasul este definit pentru fiecare NUME a cărui VALOARE "
+#~ "este dată."
+
+#~ msgid "A trailing space in VALUE causes the next word to be checked for"
+#~ msgstr ""
+#~ "Un spaţiu la sfârşit în VALOARE va face ca următorul cuvânt sa fie "
+#~ "interogat de"
+
+#~ msgid "alias substitution when the alias is expanded.  Alias returns"
+#~ msgstr "substituţii de alias când aliasul este extins.  Aliasul returnează"
+
+#~ msgid "true unless a NAME is given for which no alias has been defined."
+#~ msgstr ""
+#~ "adevărat în afară de cazul în care NUME nu este dat şi pentru care nu a "
+#~ "fost definit nici un alias."
+
+#~ msgid ""
+#~ "Remove NAMEs from the list of defined aliases.  If the -a option is given,"
+#~ msgstr ""
+#~ "Elimină NUME din lista de aliasuri definite.  Dacă este dată opţiunea -a,"
+
+#~ msgid "then remove all alias definitions."
+#~ msgstr "atunci şterge toate definiţiile aliasurilor."
+
+#~ msgid "Bind a key sequence to a Readline function, or to a macro.  The"
+#~ msgstr ""
+#~ "Leagă (bind) o secvenţă de taste de o funcţie Readline, sau de un macro.  "
+
+#~ msgid "syntax is equivalent to that found in ~/.inputrc, but must be"
+#~ msgstr ""
+#~ "Sintaxa este echivalentă cu cea întâlnită în ~/.inputrc, dar trebuie"
+
+#~ msgid ""
+#~ "passed as a single argument: bind '\"\\C-x\\C-r\": re-read-init-file'."
+#~ msgstr ""
+#~ "trimisă parametru singular: bind '\"\\C-x\\C-r\": re-read-init-file'."
+
+#~ msgid "Arguments we accept:"
+#~ msgstr "Parametri acceptaţi:"
+
+#~ msgid ""
+#~ "  -m  keymap         Use `keymap' as the keymap for the duration of this"
+#~ msgstr ""
+#~ "  -m  keymap         FoloseÅŸte `keymap' ca ÅŸi mapare de taste pentru "
+#~ "durata"
+
+#~ msgid "                     command.  Acceptable keymap names are emacs,"
+#~ msgstr ""
+#~ "                      acestei comenzi.  Nume acceptate de keymaps sunt "
+#~ "emacs,"
+
+#~ msgid ""
+#~ "                     emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move,"
+#~ msgstr ""
+#~ "                     emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move,"
+
+#~ msgid "                     vi-command, and vi-insert."
+#~ msgstr "                     vi-command, ÅŸi vi-insert."
+
+#~ msgid "  -l                 List names of functions."
+#~ msgstr "  -l                 Listează numele funcţiilor."
+
+#~ msgid "  -P                 List function names and bindings."
+#~ msgstr ""
+#~ "  -P                 Listează numele funcţiilor şi legăturile (bindings)."
+
+#~ msgid ""
+#~ "  -p                 List functions and bindings in a form that can be"
+#~ msgstr ""
+#~ "  -p                 Listează funcţiile şi legăturile (bindings) într-o "
+#~ "formă care"
+
+#~ msgid "                     reused as input."
+#~ msgstr "                     poate fi refolosită ca intrare(input)."
+
+#~ msgid "  -r  keyseq         Remove the binding for KEYSEQ."
+#~ msgstr "  -r  keyseq         Elimină legăturile(bindings) pentru KEYSEQ."
+
+#~ msgid "  -f  filename       Read key bindings from FILENAME."
+#~ msgstr ""
+#~ "  -f  nume_fişier       Citeşte legăturile (bindings) din NUME_FIŞIER"
+
+#~ msgid ""
+#~ "  -q  function-name  Query about which keys invoke the named function."
+#~ msgstr "  -q  nume_funcţie  Verifică tastele care invocă funcţia numită."
+
+#~ msgid "  -V                 List variable names and values"
+#~ msgstr "  -V                 Listează numele variabilelor şi valorile"
+
+#~ msgid ""
+#~ "  -v                 List variable names and values in a form that can"
+#~ msgstr ""
+#~ "  -v                 Listează numele variabilelor şi valorile într-o "
+#~ "formă care poate"
+
+#~ msgid "                     be reused as input."
+#~ msgstr "                     fi reutilizată ca date de intrare."
+
+#~ msgid ""
+#~ "  -S                 List key sequences that invoke macros and their "
+#~ "values"
+#~ msgstr ""
+#~ "  -S                 Listează secvenţele de taste care invocă macrourile "
+#~ "ÅŸi valorile lor"
+
+#~ msgid ""
+#~ "  -s                 List key sequences that invoke macros and their "
+#~ "values in"
+#~ msgstr ""
+#~ "  -s                 Listează secvenţele de taste care invocă macrourile "
+#~ "şi valorile lorîntr-o"
+
+#~ msgid "                     a form that can be reused as input."
+#~ msgstr ""
+#~ "                     formă care poate fi reutilizată ca date de intrare."
+
+#~ msgid "Exit from within a FOR, WHILE or UNTIL loop.  If N is specified,"
+#~ msgstr ""
+#~ "IeÅŸire dintr-un ciclu FOR, WHILE sau UNTIL.  Daca N este specificat,"
+
+#~ msgid "break N levels."
+#~ msgstr "întrerupe N nivele"
+
+#~ msgid "Resume the next iteration of the enclosing FOR, WHILE or UNTIL loop."
+#~ msgstr ""
+#~ "Continuă urmatoarea iteraţie din ciclul închis FOR, WHILE sau UNTIL."
+
+#~ msgid "If N is specified, resume at the N-th enclosing loop."
+#~ msgstr "Dacă N este specificat, continuă al N-ulea ciclu închis."
+
+#~ msgid "Run a shell builtin.  This is useful when you wish to rename a"
+#~ msgstr ""
+#~ "Rulează un shell intern.  Aceasta este folositoare când doriţi sa "
+#~ "redenumiţi "
+
+#~ msgid "shell builtin to be a function, but need the functionality of the"
+#~ msgstr "un shell intern drept funcţie, dar aveţi nevoie de funcţionalitatea"
+
+#~ msgid "builtin within the function itself."
+#~ msgstr "funcţiei interne de asemenea."
+
+#~ msgid "Change the current directory to DIR.  The variable $HOME is the"
+#~ msgstr "Schimbă directorul curent cu DIR.  Variabila $HOME este"
+
+#~ msgid "default DIR.  The variable $CDPATH defines the search path for"
+#~ msgstr "DIR implicit.  Variabila $CDPATH defineşte calea de căutare pentru"
+
+#~ msgid "the directory containing DIR.  Alternative directory names in CDPATH"
+#~ msgstr ""
+#~ "directorul care conţine DIR.  Numele de directoare alternative în CDPATH"
+
+#~ msgid "are separated by a colon (:).  A null directory name is the same as"
+#~ msgstr ""
+#~ "sunt separate de două puncte (:).  Un nume de director nul reprezintă "
+#~ "referire la"
+
+#~ msgid "the current directory, i.e. `.'.  If DIR begins with a slash (/),"
+#~ msgstr "directorul curent, i.e. `.'.  Dacă DIR începe cu un slash (/),"
+
+#~ msgid "then $CDPATH is not used.  If the directory is not found, and the"
+#~ msgstr "atunci $CDPATH nu este folosită.  Dacă directorul nu este găsit, şi"
+
+#~ msgid "shell option `cdable_vars' is set, then try the word as a variable"
+#~ msgstr ""
+#~ "opţiunea de shell `cdable_vars' este setată, atunci cuvântul este un nume"
+
+#~ msgid "name.  If that variable has a value, then cd to the value of that"
+#~ msgstr ""
+#~ "de variabilă.  Dacă variabila are o valoare, se va face cd pe valoarea "
+#~ "acelei"
+
+#~ msgid ""
+#~ "variable.  The -P option says to use the physical directory structure"
+#~ msgstr ""
+#~ "variabile.  Opţiunea -P trimite la folosirea structurii fizice de "
+#~ "directoare"
+
+#~ msgid ""
+#~ "instead of following symbolic links; the -L option forces symbolic links"
+#~ msgstr ""
+#~ "în loc de urmarea legăturilor simbolice; opţiunea -L forţează urmarea"
+
+#~ msgid "to be followed."
+#~ msgstr "legăturilor simbolice."
+
+#~ msgid "Print the current working directory.  With the -P option, pwd prints"
+#~ msgstr "Afişează directorul de lucru curent.  Cu opţiunea -P, pwd afişează"
+
+#~ msgid "the physical directory, without any symbolic links; the -L option"
+#~ msgstr "directoarele simbolice, fără nici o legătură simbolică; opţiunea -L"
+
+#~ msgid "makes pwd follow symbolic links."
+#~ msgstr "face ca pwd să urmeze legăturile simbolice."
+
+#~ msgid ""
+#~ "Runs COMMAND with ARGS ignoring shell functions.  If you have a shell"
+#~ msgstr ""
+#~ "Rulează COMANDA cu PARAMETRI ignorând funcţiile shellului.  Dacă aveţi"
+
+#~ msgid "function called `ls', and you wish to call the command `ls', you can"
+#~ msgstr ""
+#~ "o funcţie a shellului care se cheamă `ls', şi doriţi sa numiţi comanda "
+#~ "`ls', puteţi"
+
+#~ msgid ""
+#~ "say \"command ls\".  If the -p option is given, a default value is used"
+#~ msgstr ""
+#~ "spune \"command ls\".  Daca este dată opţiunea -p este folosită o valoare "
+#~ "implicită"
+
+#~ msgid ""
+#~ "for PATH that is guaranteed to find all of the standard utilities.  If"
+#~ msgstr ""
+#~ "pentru CALE care e garantată să găsească toate utilitarele standard.  Dacă"
+
+#~ msgid ""
+#~ "the -V or -v option is given, a string is printed describing COMMAND."
+#~ msgstr ""
+#~ "sunt date opţiunile -V sau -v, este tipărit un şir care descrie COMANDA."
+
+#~ msgid "The -V option produces a more verbose description."
+#~ msgstr "Opţiunea -V produce o descriere mult mai detaliată."
+
+#~ msgid "Declare variables and/or give them attributes.  If no NAMEs are"
+#~ msgstr ""
+#~ "Declară variabile şi/sau le dă atribute.  Dacă nu e dat nici un NUME,"
+
+#~ msgid "given, then display the values of variables instead.  The -p option"
+#~ msgstr "va afişa în loc valorile variabilelor.  Opţiunea -p"
+
+#~ msgid "will display the attributes and values of each NAME."
+#~ msgstr "va afişa atributele şi valorile fiecărui NUME."
+
+#~ msgid "The flags are:"
+#~ msgstr "Marcajele(flags) sunt:"
+
+#~ msgid "  -a\tto make NAMEs arrays (if supported)"
+#~ msgstr "  -a\tpentru a crea intervale de NUME (dacă este suportat)"
+
+#~ msgid "  -f\tto select from among function names only"
+#~ msgstr "  -f\tpentru a selecta doar prin numele funcţiilor"
+
+#~ msgid "  -F\tto display function names without definitions"
+#~ msgstr "  -F\tpentru a afişa numele funcţiilor fără definiţii"
+
+#~ msgid "  -r\tto make NAMEs readonly"
+#~ msgstr "  -r\tpentru a face NUME doar în citire (readonly)"
+
+#~ msgid "  -x\tto make NAMEs export"
+#~ msgstr "  -x\tpentru a exporta NUME"
+
+#~ msgid "  -i\tto make NAMEs have the `integer' attribute set"
+#~ msgstr "  -i\tpentru ca NUME să aibe setat atributul de `integer'"
+
+#~ msgid "Variables with the integer attribute have arithmetic evaluation (see"
+#~ msgstr "Variabilele cu atributul integer au evaluarea aritmetică (vezi"
+
+#~ msgid "`let') done when the variable is assigned to."
+#~ msgstr "`let') efectuată când îi este atribuită variabila."
+
+#~ msgid "When displaying values of variables, -f displays a function's name"
+#~ msgstr "La afişarea valorilor variabilelor, -f afişează numele funcţiei"
+
+#~ msgid "and definition.  The -F option restricts the display to function"
+#~ msgstr "şi definiţia.  Opţiunea -F restrânge afişarea doar la"
+
+#~ msgid "name only."
+#~ msgstr "numele funcţiei."
+
+#~ msgid ""
+#~ "Using `+' instead of `-' turns off the given attribute instead.  When"
+#~ msgstr "Folosirea `+' în locul `-' dezactivează atributul dat.  Când"
+
+#~ msgid "used in a function, makes NAMEs local, as with the `local' command."
+#~ msgstr ""
+#~ "este folosit într-o funcţie, se consideră NUME locale, ca şi în comanda "
+#~ "`local'."
+
+#~ msgid "Obsolete.  See `declare'."
+#~ msgstr "ÃŽnvechit.  Vezi `declare'."
+
+#~ msgid "Create a local variable called NAME, and give it VALUE.  LOCAL"
+#~ msgstr ""
+#~ "Creează o variabilă locală denumită NUME, şi îi atribuie VALOARE.  LOCAL"
+
+#~ msgid "have a visible scope restricted to that function and its children."
+#~ msgstr ""
+#~ "să aibă un domeniu vizibil restrâns la acea funcţie şi copilul (children) "
+#~ "ei."
+
+#~ msgid "Output the ARGs.  If -n is specified, the trailing newline is"
+#~ msgstr ""
+#~ "Afişează (output) ARGumenetele.  Dacă -n este specificat,sfârşitul de "
+#~ "linie este"
+
+#~ msgid "suppressed.  If the -e option is given, interpretation of the"
+#~ msgstr "suprimat.  Dacă este dată opţiunea -e, interpretarea"
+
+#~ msgid "following backslash-escaped characters is turned on:"
+#~ msgstr ""
+#~ "următorului caracterelor speciale (backslash-escaped) este activată:"
+
+#~ msgid "\t\\a\talert (bell)"
+#~ msgstr "\t\\a\talertă (clopoţel (bell))"
+
+#~ msgid "\t\\b\tbackspace"
+#~ msgstr "\t\\b\tbackspace"
+
+#~ msgid "\t\\c\tsuppress trailing newline"
+#~ msgstr "\t\\c\tsuprimă sfârşitul de linie"
+
+#~ msgid "\t\\E\tescape character"
+#~ msgstr "\t\\E\tcaracterul escape"
+
+#~ msgid "\t\\f\tform feed"
+#~ msgstr "\t\\f\ttrecere la început de linie (form feed)"
+
+#~ msgid "\t\\n\tnew line"
+#~ msgstr "\t\\n\tlinie nouă"
+
+#~ msgid "\t\\r\tcarriage return"
+#~ msgstr "\t\\r\tretur de car (carriage return)"
+
+#~ msgid "\t\\t\thorizontal tab"
+#~ msgstr "\t\\t\ttab orizontal"
+
+#~ msgid "\t\\v\tvertical tab"
+#~ msgstr "\t\\v\ttab vertical"
+
+#~ msgid "\t\\\\\tbackslash"
+#~ msgstr "\t\\\\\tbackslash"
+
+#~ msgid "\t\\num\tthe character whose ASCII code is NUM (octal)."
+#~ msgstr "\t\\num\tcaracterul al cărui cod ASCII este NUM (octal)."
+
+#~ msgid ""
+#~ "You can explicitly turn off the interpretation of the above characters"
+#~ msgstr "Puteţi dezactiva explicit interpretarea caracterelor de mai sus"
+
+#~ msgid "with the -E option."
+#~ msgstr "cu ajutorul opţiunii -E."
+
+#~ msgid ""
+#~ "Output the ARGs.  If -n is specified, the trailing newline is suppressed."
+#~ msgstr ""
+#~ "Afişează (output) ARGumentele. Dacă este specificat -n, sfârşitul de "
+#~ "linie este suprimat."
+
+#~ msgid "Enable and disable builtin shell commands.  This allows"
+#~ msgstr ""
+#~ "Activează şi dezactivează comenzile interne ale shell-ului.  Aceasta vă"
+
+#~ msgid "you to use a disk command which has the same name as a shell"
+#~ msgstr ""
+#~ "permite utilizarea unei comenzi disk care să aibă acelaşi nume ca şi cea "
+
+#~ msgid "builtin.  If -n is used, the NAMEs become disabled; otherwise"
+#~ msgstr ""
+#~ "internă a shell-ului.  Dacă este folosit -n, NUME devine dezactivat; în "
+#~ "caz contrar"
+
+#~ msgid "NAMEs are enabled.  For example, to use the `test' found on your"
+#~ msgstr ""
+#~ "NUME este activat.  De exemplu, pentru a folosi funcţia `test; aflată în"
+
+#~ msgid "path instead of the shell builtin version, type `enable -n test'."
+#~ msgstr ""
+#~ "calea(path) dumneavoastră în loc de versiunea internă, tastaţi `enable -n "
+#~ "test'."
+
+#~ msgid "On systems supporting dynamic loading, the -f option may be used"
+#~ msgstr ""
+#~ "Pe sistemele care suportă încărcarea dinamică, opţiunea -f poate fi "
+#~ "folosită"
+
+#~ msgid "to load new builtins from the shared object FILENAME.  The -d"
+#~ msgstr ""
+#~ "pentru a încărca noile elemente (builtins) din obiectul distribuit "
+#~ "(shared object) NUME_FIŞIER. Opţiunea -d"
+
+#~ msgid "option will delete a builtin previously loaded with -f.  If no"
+#~ msgstr "va şterge un element (builtin) deja încărcat cu -f. Dacă nu"
+
+#~ msgid "non-option names are given, or the -p option is supplied, a list"
+#~ msgstr ""
+#~ "este dat nici un nume non-opţiune, sau este prezentă opţiunea -p, o listă"
+
+#~ msgid "of builtins is printed.  The -a option means to print every builtin"
+#~ msgstr ""
+#~ "de elemente(builtins) este tipărită.  Opţiunea -a înseamnă tipărirea "
+#~ "fiecărui "
+
+#~ msgid "with an indication of whether or not it is enabled.  The -s option"
+#~ msgstr ""
+#~ "element(builtin) cu o indicaţie dacă este sau nu activ.  Opţiunea -s"
+
+#~ msgid "restricts the output to the Posix.2 `special' builtins.  The -n"
+#~ msgstr ""
+#~ "restricţionează output-ul la elementele(builtins) `speciale' Posix 2. "
+#~ "Opţiunea"
+
+#~ msgid "option displays a list of all disabled builtins."
+#~ msgstr "-n afişează o listă a tuturor elementelor(builtins) inactive."
+
+#~ msgid ""
+#~ "Read ARGs as input to the shell and execute the resulting command(s)."
+#~ msgstr ""
+#~ "Citeşte ARGumente ca input al shell-ului şi execută comanda(comenzile) "
+#~ "rezultată(e)."
+
+#~ msgid "Getopts is used by shell procedures to parse positional parameters."
+#~ msgstr ""
+#~ "Getopts este folosit de procedurile de shell pentru a analiza(parse) "
+#~ "parametrii poziţionali."
+
+#~ msgid "OPTSTRING contains the option letters to be recognized; if a letter"
+#~ msgstr ""
+#~ "OPTSTRING conţine literele optiunilor care vor fi recunoscute; dacă o "
+#~ "literă"
+
+#~ msgid "is followed by a colon, the option is expected to have an argument,"
+#~ msgstr "e urmată de două puncte, opţiunea va trebui să aibă un parametru,"
+
+#~ msgid "which should be separated from it by white space."
+#~ msgstr "care va fi separat de aceasta printr-un spaţiu."
+
+#~ msgid "Each time it is invoked, getopts will place the next option in the"
+#~ msgstr ""
+#~ "De fiecare dată când este invocat, getopts va pune următoarea opţiune în"
+
+#~ msgid "shell variable $name, initializing name if it does not exist, and"
+#~ msgstr "variabile de shell $name, iniţializând name dacă nu există, şi"
+
+#~ msgid "the index of the next argument to be processed into the shell"
+#~ msgstr "indexul următorilor parametri care vor fi procesaţi în variabila"
+
+#~ msgid "variable OPTIND.  OPTIND is initialized to 1 each time the shell or"
+#~ msgstr ""
+#~ "de shell OPTIND.  OPTIND este iniţializată cu 1 de fiecare dată când "
+#~ "shellul sau"
+
+#~ msgid "a shell script is invoked.  When an option requires an argument,"
+#~ msgstr ""
+#~ "un script al shellului este invocat.  Când opţiunea necesită un parametru,"
+
+#~ msgid "getopts places that argument into the shell variable OPTARG."
+#~ msgstr "getopts plasează acest parametru în variabila de shell OPTARG."
+
+#~ msgid "getopts reports errors in one of two ways.  If the first character"
+#~ msgstr "getopts raportează erori în două feluri.  Dacă primul caracter"
+
+#~ msgid "of OPTSTRING is a colon, getopts uses silent error reporting.  In"
+#~ msgstr ""
+#~ "al OPTSTRING este 'două puncte', getopts va folosi raportarea "
+#~ "silenţioasă.  În"
+
+#~ msgid "this mode, no error messages are printed.  If an illegal option is"
+#~ msgstr ""
+#~ "acest mod, nici un mesaj de eroare nu este tipărit.  Dacă o opţiune "
+#~ "ilegală este"
+
+#~ msgid "seen, getopts places the option character found into OPTARG.  If a"
+#~ msgstr "întâlnită, getopts plasează caracterul opţiunii în OPTARG.  Dacă un"
+
+#~ msgid "required argument is not found, getopts places a ':' into NAME and"
+#~ msgstr "parametru necesar nu este întâlnit, getopts pune ':' la NUME şi"
+
+#~ msgid "sets OPTARG to the option character found.  If getopts is not in"
+#~ msgstr ""
+#~ "setează OPTARG la caracterul întâlnit al opţiunii.  Dacă getopts nu este "
+#~ "în"
+
+#~ msgid "silent mode, and an illegal option is seen, getopts places '?' into"
+#~ msgstr ""
+#~ "modul silenţios, şi se întâlneşte o opţiune ilegală, getopts pune '?' în"
+
+#~ msgid "NAME and unsets OPTARG.  If a required option is not found, a '?'"
+#~ msgstr ""
+#~ "NUME şi desetează OPTARG.  Dacă o opţiune necesară nu este întâlnită, un "
+#~ "'?'"
+
+#~ msgid "is placed in NAME, OPTARG is unset, and a diagnostic message is"
+#~ msgstr ""
+#~ "va fi pus în NUME, OPTARG va fi desetat, şi un mesaj de diagnosticare va "
+#~ "fi"
+
+#~ msgid "printed."
+#~ msgstr "afiÅŸat."
+
+#~ msgid "If the shell variable OPTERR has the value 0, getopts disables the"
+#~ msgstr "Dacă variabila de shell OPTERR are valoarea 0, getopts dezactivează"
+
+#~ msgid "printing of error messages, even if the first character of"
+#~ msgstr "afiÅŸarea mesajelor de eroare, chiar daca primul caracter al"
+
+#~ msgid "OPTSTRING is not a colon.  OPTERR has the value 1 by default."
+#~ msgstr "OPTSTRING nu este 'două puncte'.  OPTERR are implicit valoarea 1."
+
+#~ msgid "Getopts normally parses the positional parameters ($0 - $9), but if"
+#~ msgstr ""
+#~ "Getopts analizează(parses) normal parametrii poziţionali ($0 - $9), dar "
+#~ "dacă"
+
+#~ msgid "more arguments are given, they are parsed instead."
+#~ msgstr "sunt daţi mai mulţi parametri, aceştia sunt analizaţi în loc."
+
+#~ msgid "Exec FILE, replacing this shell with the specified program."
+#~ msgstr "Exec FIŞIER, înlocuind acest shell cu un program specificat."
+
+#~ msgid "If FILE is not specified, the redirections take effect in this"
+#~ msgstr "Dacă FIŞIER nu este specificat, redirectările au efect în acest"
+
+#~ msgid "shell.  If the first argument is `-l', then place a dash in the"
+#~ msgstr ""
+#~ "shell.  Dacă primul parametru este `-l', atunci se va plasa o liniuţă în"
+
+#~ msgid "zeroth arg passed to FILE, as login does.  If the `-c' option"
+#~ msgstr ""
+#~ "al zero-ulea arg pasat FIŞIERului, cum face login-ul.  Dacă opţiunea `-c'"
+
+#~ msgid "is supplied, FILE is executed with a null environment.  The `-a'"
+#~ msgstr "este furnizată, FIŞIER este executat cu un mediu null.  Opţiunea"
+
+#~ msgid "option means to make set argv[0] of the executed process to NAME."
+#~ msgstr "'-a' înseamnă setarea argv[0] a procesului executat la NUME."
+
+#~ msgid "If the file cannot be executed and the shell is not interactive,"
+#~ msgstr "Dacă fişierul nu poate fi executat şi shell-ul nu este interactiv,"
+
+#~ msgid "then the shell exits, unless the variable \"no_exit_on_failed_exec\""
+#~ msgstr "atunci shell-ul iese, dacă variabila \"no_exit_on_failed_exec\""
+
+#~ msgid "is set."
+#~ msgstr "nu este setată."
+
+#~ msgid "is that of the last command executed."
+#~ msgstr "este aceea a ultimei comenzi executate."
+
+#~ msgid ""
+#~ "FIRST and LAST can be numbers specifying the range, or FIRST can be a"
+#~ msgstr ""
+#~ "PRIMUL şi ULTIMUL pot fi numere care specifică intervalul, sau PRIMUL "
+#~ "poate fi"
+
+#~ msgid "string, which means the most recent command beginning with that"
+#~ msgstr ""
+#~ "un şir care reprezintă cea mai recentă comandă care începea cu acest"
+
+#~ msgid "string."
+#~ msgstr "ÅŸir."
+
+#~ msgid ""
+#~ "   -e ENAME selects which editor to use.  Default is FCEDIT, then EDITOR,"
+#~ msgstr ""
+#~ "   -e ENUME selectează editorul de folosit.  implicit este FCEDIT, apoi "
+#~ "EDITOR,"
+
+#~ msgid ""
+#~ "      then the editor which corresponds to the current readline editing"
+#~ msgstr ""
+#~ "      apoi editorul care corespunde cu modul de editare al "
+#~ "liniei(readline)"
+
+#~ msgid "      mode, then vi."
+#~ msgstr "      curente, ÅŸi apoi vi."
+
+#~ msgid "   -l means list lines instead of editing."
+#~ msgstr "   -l reprezintă afişarea liniilor în locul editării acestora."
+
+#~ msgid "   -n means no line numbers listed."
+#~ msgstr "   -n înseamnă că nu vor fi afişate numerele liniilor."
+
+#~ msgid ""
+#~ "   -r means reverse the order of the lines (making it newest listed "
+#~ "first)."
+#~ msgstr ""
+#~ "   -r reprezintă inversarea ordinii liniilor (cele mai noi fiind listate "
+#~ "primele)."
+
+#~ msgid "With the `fc -s [pat=rep ...] [command]' format, the command is"
+#~ msgstr "Cu `fc -s [pat=rep ...] [comandă]' format, comanda este"
+
+#~ msgid "re-executed after the substitution OLD=NEW is performed."
+#~ msgstr "reexecutată după ce s-a produs substituţia VECHI=NOU."
+
+#~ msgid "A useful alias to use with this is r='fc -s', so that typing `r cc'"
+#~ msgstr "Un alias folositor este r='fc -s', aşa că tastând `r cc'"
+
+#~ msgid "runs the last command beginning with `cc' and typing `r' re-executes"
+#~ msgstr ""
+#~ "se rulează ultima comandă care începe cu `cc' şi tastând `r' se reexecută"
+
+#~ msgid "Place JOB_SPEC in the foreground, and make it the current job.  If"
+#~ msgstr ""
+#~ "Aduce JOB_SPEC în prim plan(foreground), ?şi îl face jobul curent.  Dacă"
+
+#~ msgid "JOB_SPEC is not present, the shell's notion of the current job is"
+#~ msgstr ""
+#~ "JOB_SPEC nu este prezent, este folosită noţiunea shell-ului despre jobul"
+
+#~ msgid "used."
+#~ msgstr "curent."
+
+#~ msgid "Place JOB_SPEC in the background, as if it had been started with"
+#~ msgstr "Pune JOB_SPEC în fundal(background), ca şi cum ar fi fost pornit cu"
+
+#~ msgid "`&'.  If JOB_SPEC is not present, the shell's notion of the current"
+#~ msgstr ""
+#~ "`&'.  Dacă JOB_SPEC nu este prezent, va fi folosită noţiunea shell-ului "
+#~ "despre"
+
+#~ msgid "job is used."
+#~ msgstr "jobul curent."
+
+#~ msgid "For each NAME, the full pathname of the command is determined and"
+#~ msgstr "Pentru fiecare NUME, calea întreagă a comenzii este determinată şi"
+
+#~ msgid "remembered.  If the -p option is supplied, PATHNAME is used as the"
+#~ msgstr ""
+#~ "reţinută.  Daca este furnizată şi opţiunea -p, CALE este folosită ca şi"
+
+#~ msgid "full pathname of NAME, and no path search is performed.  The -r"
+#~ msgstr ""
+#~ "cale de căutare întreagă a NUMElui, şi nu se mai face căutare în calea "
+#~ "curentă.  "
+
+#~ msgid "option causes the shell to forget all remembered locations.  If no"
+#~ msgstr ""
+#~ "Opţiunea -r face ca shell-ul să uite toate locaţiile reţinute.  Dacă nu"
+
+#~ msgid ""
+#~ "arguments are given, information about remembered commands is displayed."
+#~ msgstr ""
+#~ "este furnizat nici un parametru sunt afişate informaţii despre comenzile "
+#~ "reţinute."
+
+#~ msgid "Display helpful information about builtin commands.  If PATTERN is"
+#~ msgstr ""
+#~ "Se afişează informaţii folositoare despre comenzile interne.  Dacă TIPAR "
+#~ "este"
+
+#~ msgid "specified, gives detailed help on all commands matching PATTERN,"
+#~ msgstr ""
+#~ "specificat, se dă ajutor detaliat pentru toate comenzile potrivite "
+#~ "TIPARului,"
+
+#~ msgid "otherwise a list of the builtins is printed."
+#~ msgstr "în caz contrar se va tipări o listă a comenzilor interne."
+
+#~ msgid "Display the history list with line numbers.  Lines listed with"
+#~ msgstr "Afişează istoricul cu numerele liniilor.  Liniile listate cu"
+
+#~ msgid "with a `*' have been modified.  Argument of N says to list only"
+#~ msgstr "un `*' au fost modificate.  Parametrul N va aduce afiÅŸarea doar "
+
+#~ msgid "the last N lines.  The -c option causes the history list to be"
+#~ msgstr "a ultimelor N linii.  Opţiunea -c face ca lista istoricului să fie"
+
+#~ msgid ""
+#~ "cleared by deleting all of the entries.  The `-w' option writes out the"
+#~ msgstr "ştearsă prin ştergerea tuturor intrărilor.  Opţiunea `-w' scrie"
+
+#~ msgid ""
+#~ "current history to the history file;  `-r' means to read the file and"
+#~ msgstr ""
+#~ "istoricul curent în fişierul de istoric;  `-r' înseamnă citirea "
+#~ "fiÅŸierului ÅŸi"
+
+#~ msgid "append the contents to the history list instead.  `-a' means"
+#~ msgstr "adăugare a conţinutului listei istoricului în loc.  `-a' înseamnă"
+
+#~ msgid "to append history lines from this session to the history file."
+#~ msgstr ""
+#~ "adăugare a liniilor istoricului din această sesiune la fişierul de "
+#~ "istoric."
+
+#~ msgid "Argument `-n' means to read all history lines not already read"
+#~ msgstr ""
+#~ "Parametrul `-n' înseamnă citirea tuturor liniilor istoricului care nu "
+#~ "sunt deja citite"
+
+#~ msgid "from the history file and append them to the history list.  If"
+#~ msgstr ""
+#~ "din fişierul de istoric şi adăugarea lor la lista istoricului.  Dacă"
+
+#~ msgid "FILENAME is given, then that is used as the history file else"
+#~ msgstr ""
+#~ "este dat NUME_FIŞIER, acesta va fi utilizat ca fişier de istoric, în caz "
+#~ "contrar"
+
+#~ msgid "if $HISTFILE has a value, that is used, else ~/.bash_history."
+#~ msgstr ""
+#~ "dacă $HISTFILE are valoare, aceasta este utilizată, altfel ~/."
+#~ "bash_history."
+
+#~ msgid "If the -s option is supplied, the non-option ARGs are appended to"
+#~ msgstr ""
+#~ "Dacă este furnizată opţiunea -s ARGumentele non-opţiuni sunt adăugate la"
+
+#~ msgid "the history list as a single entry.  The -p option means to perform"
+#~ msgstr "lista istoricului ca intrări singure.  Opţiunea -p înseamnă"
+
+#~ msgid ""
+#~ "history expansion on each ARG and display the result, without storing"
+#~ msgstr ""
+#~ "expandarea istoricului la fiecare ARGument şi afişarea rezultatului, fără "
+#~ "a stoca"
+
+#~ msgid "anything in the history list."
+#~ msgstr "nimic în lista istoricului."
+
+#~ msgid "Lists the active jobs.  The -l option lists process id's in addition"
+#~ msgstr ""
+#~ "Listează joburile active.  Opţiunea -l listează id-urile proceselor în "
+#~ "plus faţă de"
+
+#~ msgid "to the normal information; the -p option lists process id's only."
+#~ msgstr ""
+#~ "informaţiile normale; optiunea -p listează doar id-urile proceselor."
+
+#~ msgid ""
+#~ "If -n is given, only processes that have changed status since the last"
+#~ msgstr ""
+#~ "Dacă este dat -n,sunt afişate  doar procesele care şi-au schimbat starea"
+
+#~ msgid ""
+#~ "notification are printed.  JOBSPEC restricts output to that job.  The"
+#~ msgstr ""
+#~ "de la ultima notificare.  JOBSPEC restricţionează output-ul spre acel "
+#~ "job.  "
+
+#~ msgid "-r and -s options restrict output to running and stopped jobs only,"
+#~ msgstr ""
+#~ "Opţiunile -r şi -s restricţionează output-ul doar spre joburile care "
+#~ "rulează şi respectiv,"
+
+#~ msgid "respectively.  Without options, the status of all active jobs is"
+#~ msgstr "care sunt stopate.  Fără opţiuni, este afişată starea joburilor"
+
+#~ msgid ""
+#~ "printed.  If -x is given, COMMAND is run after all job specifications"
+#~ msgstr ""
+#~ "active.  Dacă este furnizat -x, COMANDĂ este rulată după ce toate "
+#~ "specificaţiile"
+
+#~ msgid ""
+#~ "that appear in ARGS have been replaced with the process ID of that job's"
+#~ msgstr ""
+#~ "joburilor care aparîn ARGS au fost înlocuite cu ID-urile proceselor a"
+
+#~ msgid "process group leader."
+#~ msgstr "liderului de grup al proceselor acelui job(process group-leader)."
+
+#~ msgid "Removes each JOBSPEC argument from the table of active jobs."
+#~ msgstr "Åžterge fiecare parametru JOBSPEC din tabela de joburi active."
+
+#~ msgid "Send the processes named by PID (or JOB) the signal SIGSPEC.  If"
+#~ msgstr "Trimite proceselor numite de PID (sau JOB) semnalul SIGSPEC.  Dacă"
+
+#~ msgid ""
+#~ "SIGSPEC is not present, then SIGTERM is assumed.  An argument of `-l'"
+#~ msgstr "SIGSPEC nu este prezent, atunci se asumă SIGTERM.  Parametrul `-l'"
+
+#~ msgid "lists the signal names; if arguments follow `-l' they are assumed to"
+#~ msgstr ""
+#~ "listează numele semnalelor; dacă urmează parametri după `-l' se asumă că"
+
+#~ msgid "be signal numbers for which names should be listed.  Kill is a shell"
+#~ msgstr ""
+#~ "sunt numere de semnale pentru care numele ar trebui listate.  Kill este "
+#~ "comandă"
+
+#~ msgid "builtin for two reasons: it allows job IDs to be used instead of"
+#~ msgstr ""
+#~ "internă a sehll-ului din două motive: permite utilizarea ID-urilor de "
+#~ "joburi în locul"
+
+#~ msgid "process IDs, and, if you have reached the limit on processes that"
+#~ msgstr "ID-urilor de procese, ÅŸi, daca s-a ajuns la limita de procese care "
+
+#~ msgid ""
+#~ "you can create, you don't have to start a process to kill another one."
+#~ msgstr ""
+#~ "se pot crea, nu mai e nevoie să se pornească un proces pentru a omorî "
+#~ "altul."
+
+#~ msgid "Each ARG is an arithmetic expression to be evaluated.  Evaluation"
+#~ msgstr ""
+#~ "Fiecare ARGument este o expresie aritmetică ce va fi evaluată.  Evaluarea"
+
+#~ msgid "is done in long integers with no check for overflow, though division"
+#~ msgstr ""
+#~ "se face în întregi lungi (long integers) fără verificări de overflow, "
+#~ "totuşi împărţirea"
+
+#~ msgid "by 0 is trapped and flagged as an error.  The following list of"
+#~ msgstr "la 0 este reţinută şi marcată ca eroare.  Următoarea listă de"
+
+#~ msgid "operators is grouped into levels of equal-precedence operators."
+#~ msgstr "operatori este grupată în nivele de operatori 'equal-precedence'."
+
+#~ msgid "The levels are listed in order of decreasing precedence."
+#~ msgstr "Nivelele sunt listate în ordinea inversă a întâietăţii."
+
+#~ msgid "\t-, +\t\tunary minus, plus"
+#~ msgstr "\t-, +\t\tplus, minus unar"
+
+#~ msgid "\t!, ~\t\tlogical and bitwise negation"
+#~ msgstr "\t!, ~\t\tnegare logică"
+
+#~ msgid "\t*, /, %\t\tmultiplication, division, remainder"
+#~ msgstr "\t*, /, %\t\tînmulţire, împărţire, rest"
+
+#~ msgid "\t+, -\t\taddition, subtraction"
+#~ msgstr "\t+, -\t\tadăugare, scădere"
+
+#~ msgid "\t<<, >>\t\tleft and right bitwise shifts"
+#~ msgstr "\t<<, >>\t\toperaţii pe un bit la stânga şi la dreapta"
+
+#~ msgid "\t<=, >=, <, >\tcomparison"
+#~ msgstr "\t<=, >=, <, >\tcomparare"
+
+#~ msgid "\t==, !=\t\tequality, inequality"
+#~ msgstr "\t==, !=\t\tegalitate, inegalitate"
+
+#~ msgid "\t&\t\tbitwise AND"
+#~ msgstr "\t&\t\tÅžI pe un bit"
+
+#~ msgid "\t^\t\tbitwise XOR"
+#~ msgstr "\t^\t\tSAU exclusiv(XOR) pe un bit"
+
+#~ msgid "\t|\t\tbitwise OR"
+#~ msgstr "\t|\t\tSAU pe un bit"
+
+#~ msgid "\t&&\t\tlogical AND"
+#~ msgstr "\t&&\t\tÅžI logic"
+
+#~ msgid "\t||\t\tlogical OR"
+#~ msgstr "\t||\t\tSAU logic"
+
+#~ msgid "\texpr ? expr : expr"
+#~ msgstr "\texpr ? expr : expr"
+
+#~ msgid "\t\t\tconditional expression"
+#~ msgstr "\t\t\texpresie condiţională"
+
+#~ msgid "\t=, *=, /=, %=,"
+#~ msgstr "\t=, *=, /=, %=,"
+
+#~ msgid "\t+=, -=, <<=, >>=,"
+#~ msgstr "\t+=, -=, <<=, >>=,"
+
+#~ msgid "\t&=, ^=, |=\tassignment"
+#~ msgstr "\t&=, ^=, |=\tatribuire"
+
+#~ msgid "is replaced by its value (coerced to a long integer) within"
+#~ msgstr "este înlocuit de valoarea sa (trunchiată la un întreg lung) într-o"
+
+#~ msgid "an expression.  The variable need not have its integer attribute"
+#~ msgstr "expresie.  Variabila nu trebuie să aibă atributul său întreg"
+
+#~ msgid "turned on to be used in an expression."
+#~ msgstr "activat pentru a fi folosită într-o expresie."
+
+#~ msgid "Operators are evaluated in order of precedence.  Sub-expressions in"
+#~ msgstr "Operatorii sunt evaluaţi în ordinea întâietăţii. Subexpresiile din"
+
+#~ msgid "parentheses are evaluated first and may override the precedence"
+#~ msgstr "paranteze sunt evaluate primele ÅŸi pot suprascrie regulile de"
+
+#~ msgid "rules above."
+#~ msgstr "întâietate de mai sus."
+
+#~ msgid "If the last ARG evaluates to 0, let returns 1; 0 is returned"
+#~ msgstr ""
+#~ "Dacă ultimul ARGument este evaluat la 0 let returnează 1; 0 este returnat"
+
+#~ msgid "otherwise."
+#~ msgstr "în caz contrar."
+
+#~ msgid "One line is read from the standard input, and the first word is"
+#~ msgstr ""
+#~ "Linia este citită de la intrarea(input) standard, şi primul cuvânt este"
+
+#~ msgid ""
+#~ "assigned to the first NAME, the second word to the second NAME, and so"
+#~ msgstr ""
+#~ "atribuit primului NUME, al doilea cuvânt celui de-al doilea NUME, şi aşa"
+
+#~ msgid ""
+#~ "on, with leftover words assigned to the last NAME.  Only the characters"
+#~ msgstr ""
+#~ "mai departe, cu cele rămase atribuite ultimelor NUME.  Doar caracterele"
+
+#~ msgid "found in $IFS are recognized as word delimiters.  The return code is"
+#~ msgstr ""
+#~ "găsite în $IFS sunt recunoscute ca delimitatoare de cuvinte.  Codul "
+#~ "returnat este"
+
+#~ msgid ""
+#~ "zero, unless end-of-file is encountered.  If no NAMEs are supplied, the"
+#~ msgstr ""
+#~ "zero, cu excepţia cazului în care este întâlnit sfârşit de fişier.  Dacă "
+#~ "nici un NUME"
+
+#~ msgid ""
+#~ "line read is stored in the REPLY variable.  If the -r option is given,"
+#~ msgstr ""
+#~ "nu este furnizat, linia citită este stocată în variabila RĂSPUNS. Dacă e "
+#~ "dată "
+
+#~ msgid "this signifies `raw' input, and backslash escaping is disabled.  If"
+#~ msgstr ""
+#~ "opţiunea -r, aceasta înseamnă intrare `brută' şi caractere speciale "
+#~ "dezactivate."
+
+#~ msgid "the `-p' option is supplied, the string supplied as an argument is"
+#~ msgstr "Dacă este dată opţiunea `-p', şirul furnizat ca argument este"
+
+#~ msgid ""
+#~ "output without a trailing newline before attempting to read.  If -a is"
+#~ msgstr "trimis la output cu linie nouă înainte de citire.  Dacă -a este"
+
+#~ msgid ""
+#~ "supplied, the words read are assigned to sequential indices of ARRAY,"
+#~ msgstr ""
+#~ "furnizată, cuvintele citite sunt atribuite indicilor secvenţiali de "
+#~ "INTERVAL,"
+
+#~ msgid "starting at zero.  If -e is supplied and the shell is interactive,"
+#~ msgstr ""
+#~ "începând de la zero.  Dacă -e este furnizat şi shell-ul este interactiv,"
+
+#~ msgid "readline is used to obtain the line."
+#~ msgstr "se va citi linia pentru obţinerea acesteia."
+
+#~ msgid ""
+#~ "Causes a function to exit with the return value specified by N.  If N"
+#~ msgstr ""
+#~ "Cauzează terminarea unei funcţii cu valoarea specificată de N.  Dacă N"
+
+#~ msgid "is omitted, the return status is that of the last command."
+#~ msgstr "este omis, starea returnată va fi aceea a ultimei comenzi."
+
+#~ msgid "    -a  Mark variables which are modified or created for export."
+#~ msgstr ""
+#~ "    -a  Marchează variabilele de modificat sau create pentru export."
+
+#~ msgid "    -b  Notify of job termination immediately."
+#~ msgstr "    -b  Notificare de terminare de job imediată."
+
+#~ msgid "    -e  Exit immediately if a command exits with a non-zero status."
+#~ msgstr ""
+#~ "    -e  Iese imediat dacă există o comandă cu stare diferită de zero."
+
+#~ msgid "    -f  Disable file name generation (globbing)."
+#~ msgstr "    -f  Inhibă generarea de nume de fişiere (globalizare)."
+
+#~ msgid "    -h  Remember the location of commands as they are looked up."
+#~ msgstr "    -h  Reţine locaţiile comenzilor pe măsura verificării lor."
+
+#~ msgid ""
+#~ "    -i  Force the shell to be an \"interactive\" one.  Interactive shells"
+#~ msgstr ""
+#~ "    -i  Forţează shell-ul să fie unul \"interactiv\".  Shell-urile "
+#~ "interactive"
+
+#~ msgid "        always read `~/.bashrc' on startup."
+#~ msgstr "        citesc întotdeauna `~/.bashrc' la rulare."
+
+#~ msgid "    -k  All assignment arguments are placed in the environment for a"
+#~ msgstr "    -k  Toţi parametrii atribuirii sunt plasaţi în mediu pentru o"
+
+#~ msgid "        command, not just those that precede the command name."
+#~ msgstr "        comandă, nu doar cele care preced numele comenzii."
+
+#~ msgid "    -m  Job control is enabled."
+#~ msgstr "    -m  Controlul job-urilor este activat."
+
+#~ msgid "    -n  Read commands but do not execute them."
+#~ msgstr "    -n  Citeşte comenzile, dar nu le execută."
+
+#~ msgid "    -o option-name"
+#~ msgstr "    -o nume-opţiune"
+
+#~ msgid "        Set the variable corresponding to option-name:"
+#~ msgstr "        Setează variabila corespunzătoare numelui opţiunii:"
+
+#~ msgid "            allexport    same as -a"
+#~ msgstr "            allexport    la fel ca -a"
+
+#~ msgid "            braceexpand  same as -B"
+#~ msgstr "            braceexpand  la fel ca -B"
+
+#~ msgid "            emacs        use an emacs-style line editing interface"
+#~ msgstr ""
+#~ "            emacs        foloseşte o interfaţă de editare de linii stil "
+#~ "emacs"
+
+#~ msgid "            errexit      same as -e"
+#~ msgstr "            errexit      la fel ca -e"
+
+#~ msgid "            hashall      same as -h"
+#~ msgstr "            hashall      la fel ca -h"
+
+#~ msgid "            histexpand   same as -H"
+#~ msgstr "            histexpand   la fel ca -H"
+
+#~ msgid "            ignoreeof    the shell will not exit upon reading EOF"
+#~ msgstr "            ignoreeof    shellul nu va ieşi după citirea EOF"
+
+#~ msgid "            interactive-comments"
+#~ msgstr "            interactive-comments"
+
+#~ msgid ""
+#~ "                         allow comments to appear in interactive commands"
+#~ msgstr ""
+#~ "                         permite comentariilor să apară în comenzi "
+#~ "interactive."
+
+#~ msgid "            keyword      same as -k"
+#~ msgstr "            keyword      la fel ca -k"
+
+#~ msgid "            monitor      same as -m"
+#~ msgstr "            monitor      sla fel ca -m"
+
+#~ msgid "            noclobber    same as -C"
+#~ msgstr "            noclobber    la fel ca -C"
+
+#~ msgid "            noexec       same as -n"
+#~ msgstr "            noexec       la fel ca -n"
+
+#~ msgid "            noglob       same as -f"
+#~ msgstr "            noglob       la fel ca -f"
+
+#~ msgid "            notify       save as -b"
+#~ msgstr "            notify       la fel ca -b"
+
+#~ msgid "            nounset      same as -u"
+#~ msgstr "            nounset      la fel ca -u"
+
+#~ msgid "            onecmd       same as -t"
+#~ msgstr "            onecmd       la fel ca -t"
+
+#~ msgid "            physical     same as -P"
+#~ msgstr "            physical     la fel ca -P"
+
+#~ msgid ""
+#~ "            posix        change the behavior of bash where the default"
+#~ msgstr ""
+#~ "            posix        schimbă comportamentul bash în care implicit"
+
+#~ msgid ""
+#~ "                         operation differs from the 1003.2 standard to"
+#~ msgstr ""
+#~ "                         operaţiile diferă de standardul 1003.2 pentru"
+
+#~ msgid "                         match the standard"
+#~ msgstr "                         a se potrivi standardului"
+
+#~ msgid "            privileged   same as -p"
+#~ msgstr "            privileged   la fel ca -p"
+
+#~ msgid "            verbose      same as -v"
+#~ msgstr "            verbose      la fel ca -v"
+
+#~ msgid "            vi           use a vi-style line editing interface"
+#~ msgstr ""
+#~ "            vi           foloseşte o interfaţă de editare de linii stil vi"
+
+#~ msgid "            xtrace       same as -x"
+#~ msgstr "            xtrace       la fel ca -x"
+
+#~ msgid ""
+#~ "    -p  Turned on whenever the real and effective user ids do not match."
+#~ msgstr ""
+#~ "    -p  Activat de fiecare dată când id-urile de user real şi efectiv nu "
+#~ "se potrivesc."
+
+#~ msgid "        Disables processing of the $ENV file and importing of shell"
+#~ msgstr "        Inhibă procesarea fişierului $ENV şi importarea funcţiilor"
+
+#~ msgid ""
+#~ "        functions.  Turning this option off causes the effective uid and"
+#~ msgstr ""
+#~ "        shell-ului.  Dezactivarea acestei opţiuni face ca uid-ul şi gid-ul"
+
+#~ msgid "        gid to be set to the real uid and gid."
+#~ msgstr "        efectiv să fie setate drept uid-ul şi gid-ul real."
+
+#~ msgid "    -t  Exit after reading and executing one command."
+#~ msgstr "    -t  Iese după citirea şi executarea unei comenzi."
+
+#~ msgid "    -u  Treat unset variables as an error when substituting."
+#~ msgstr "    -u  Tratează variabilele nesetate drept erori în substituţie."
+
+#~ msgid "    -v  Print shell input lines as they are read."
+#~ msgstr ""
+#~ "    -v  Tipăreşte liniile de intrare(input) ale shell-ului pe măsură ce "
+#~ "sunt citite."
+
+#~ msgid "    -x  Print commands and their arguments as they are executed."
+#~ msgstr ""
+#~ "    -x  Tipăreşte comenzile şi parametrii acestora pe măsura executării."
+
+#~ msgid "    -B  the shell will perform brace expansion"
+#~ msgstr "    -B  shell-ul va executa expansiune de legături(brace)"
+
+#~ msgid "    -H  Enable ! style history substitution.  This flag is on"
+#~ msgstr ""
+#~ "    -H  Activează substituţia istoricului stil ! .  Acest marcaj(flag) "
+#~ "este activat"
+
+#~ msgid "        by default."
+#~ msgstr "        în mod implicit."
+
+#~ msgid "    -C  If set, disallow existing regular files to be overwritten"
+#~ msgstr ""
+#~ "    -C  Dacă este setat, nu va permite suprascrierea fişierelor existente"
+
+#~ msgid "        by redirection of output."
+#~ msgstr "        prin redirectarea output-ului."
+
+#~ msgid "    -P  If set, do not follow symbolic links when executing commands"
+#~ msgstr ""
+#~ "    -P  Dacă este setat, nu va urma legăturile simbolice în executarea "
+#~ "comenzilor"
+
+#~ msgid "        such as cd which change the current directory."
+#~ msgstr "        precum cd care schimbă directorul curent."
+
+#~ msgid "Using + rather than - causes these flags to be turned off.  The"
+#~ msgstr ""
+#~ "Folosind + în locul lui - provoacă dezactivarea acestor marcaje(flags)."
+
+#~ msgid "flags can also be used upon invocation of the shell.  The current"
+#~ msgstr ""
+#~ "  Marcajele pot fi folosite de asemenea pentru invocarea shell-ului.  "
+#~ "Setul"
+
+#~ msgid ""
+#~ "set of flags may be found in $-.  The remaining n ARGs are positional"
+#~ msgstr ""
+#~ "curent de marcaje(flags) poate fi găsit în $-.  ARGumentele n rămase sunt"
+
+#~ msgid "parameters and are assigned, in order, to $1, $2, .. $n.  If no"
+#~ msgstr ""
+#~ "parametri poziţionali şi sunt atribuiţi, în ordine, lui $1, $2, .. $n.  "
+#~ "Dacă nu"
+
+#~ msgid "ARGs are given, all shell variables are printed."
+#~ msgstr ""
+#~ "este dat nici un ARGument, sunt tipărite toate variabilele shell-ului."
+
+#~ msgid "For each NAME, remove the corresponding variable or function.  Given"
+#~ msgstr ""
+#~ "Pentru fiecare NUME, şterge variabila sau funcţia corespunzătoare.  Dacă "
+#~ "se"
+
+#~ msgid "the `-v', unset will only act on variables.  Given the `-f' flag,"
+#~ msgstr ""
+#~ "dă `-v', desetarea(unset) va acţiona numai pe variabile.  Dacă se dă `-f',"
+
+#~ msgid "unset will only act on functions.  With neither flag, unset first"
+#~ msgstr ""
+#~ "desetarea(unset) va acţiona numai pe funcţii.  Fără nici un marcaj(flag), "
+
+#~ msgid "tries to unset a variable, and if that fails, then tries to unset a"
+#~ msgstr ""
+#~ "desetarea(unset) va încerca întâi pe variabile, şi dacă eşueazăm va "
+#~ "încerca"
+
+#~ msgid ""
+#~ "function.  Some variables (such as PATH and IFS) cannot be unset; also"
+#~ msgstr ""
+#~ "pe o funcţie.  Anumite variabile ( precum PATH şi IFS) nu pot fi "
+#~ "desetate(unset);"
+
+#~ msgid "see readonly."
+#~ msgstr "de asemenea, vedeţi readonly."
+
+#~ msgid "NAMEs are marked for automatic export to the environment of"
+#~ msgstr "NUMEle sunt marcate pentru exportul automat către mediul"
+
+#~ msgid "subsequently executed commands.  If the -f option is given,"
+#~ msgstr "comenzilor executate ulterior.  Dacă este dată opţiunea -f,"
+
+#~ msgid "the NAMEs refer to functions.  If no NAMEs are given, or if `-p'"
+#~ msgstr ""
+#~ "NUMEle se referă la funcţii.  Dacă nu este dat nici un NUME, sau este dat "
+#~ "`-p'`,"
+
+#~ msgid "is given, a list of all names that are exported in this shell is"
+#~ msgstr ""
+#~ "va fi tipărită o listă a tuturor numelor care sunt exportate în acest"
+
+#~ msgid "printed.  An argument of `-n' says to remove the export property"
+#~ msgstr "shell.  Parametrul `-n' va elimina proprietatea de export "
+
+#~ msgid "from subsequent NAMEs.  An argument of `--' disables further option"
+#~ msgstr ""
+#~ "din NUMEle ulterioare.  Parametrul `--' dezactivează procesarea opţiunilor"
+
+#~ msgid "processing."
+#~ msgstr "viitoare."
+
+#~ msgid ""
+#~ "The given NAMEs are marked readonly and the values of these NAMEs may"
+#~ msgstr "NUMEle date sunt marcate readonly ÅŸi valorile acestor NUME nu poate"
+
+#~ msgid "not be changed by subsequent assignment.  If the -f option is given,"
+#~ msgstr "fi schimbat de atribuiri ulterioare.  Dacă este dată opţiunea -f,"
+
+#~ msgid "then functions corresponding to the NAMEs are so marked.  If no"
+#~ msgstr "atunci funcţiile corespunzătoare NUMElor sunt marcate.  Dacă nu"
+
+#~ msgid ""
+#~ "arguments are given, or if `-p' is given, a list of all readonly names"
+#~ msgstr ""
+#~ "sunt furnizaţidaţ paramet, sau este dat parametrul `-p'` o listă de nume "
+#~ "readonlyri "
+
+#~ msgid ""
+#~ "is printed.  An argument of `-n' says to remove the readonly property"
+#~ msgstr ""
+#~ "va fi tipărită.  Parametrul `-n' va elimina proprietatea de readonly"
+
+#~ msgid "from subsequent NAMEs.  The `-a' option means to treat each NAME as"
+#~ msgstr ""
+#~ "pentru NUMEle ulterioare.  Opţiunea `-a' reprezintă tratarea fiecărui "
+#~ "NUME ca"
+
+#~ msgid "an array variable.  An argument of `--' disables further option"
+#~ msgstr "o variabilă interval.  Parametrul `--' dezactivează alte opţiuni"
+
+#~ msgid ""
+#~ "The positional parameters from $N+1 ... are renamed to $1 ...  If N is"
+#~ msgstr ""
+#~ "Parametrii poziţionali de la $N+1 ... sunt redenumiţi în $1 ...  Dacă N "
+#~ "nu este"
+
+#~ msgid "not given, it is assumed to be 1."
+#~ msgstr "furnizat, se presupune că e 1."
+
+#~ msgid "Read and execute commands from FILENAME and return.  The pathnames"
+#~ msgstr "Citeşte şi execută comenzi din NUME_FIŞIER şi returnare.  Căile"
+
+#~ msgid "in $PATH are used to find the directory containing FILENAME."
+#~ msgstr ""
+#~ "din $PATH sunt folosite pentru a găsi directorul care conţine NUME_FIŞIER."
+
+#~ msgid "Suspend the execution of this shell until it receives a SIGCONT"
+#~ msgstr ""
+#~ "Suspendă execuţia acestui shell până se va primi un semnal de SIGCONT."
+
+#~ msgid "signal.  The `-f' if specified says not to complain about this"
+#~ msgstr "  Dacă este specificat `-f' va elimina avertismentele despre acest "
+
+#~ msgid "being a login shell if it is; just suspend anyway."
+#~ msgstr "login shell; va suspenda oricum."
+
+#~ msgid "Exits with a status of 0 (trueness) or 1 (falseness) depending on"
+#~ msgstr "Iese cu o stare de 0 (adevăr) sau 1 (falsitate) depinzând de"
+
+#~ msgid "the evaluation of EXPR.  Expressions may be unary or binary.  Unary"
+#~ msgstr "evaluarea EXPR.  Expresiile pot fi unare sau binare.  Expresiile"
+
+#~ msgid "expressions are often used to examine the status of a file.  There"
+#~ msgstr ""
+#~ "unare sunt des folosite pentru a examina starea unui fişier.  Mai există"
+
+#~ msgid "are string operators as well, and numeric comparison operators."
+#~ msgstr "operatori de şir de asemenea, şi operator de comparare numerică."
+
+#~ msgid "File operators:"
+#~ msgstr "Operatori de fiÅŸier:"
+
+#~ msgid "    -b FILE        True if file is block special."
+#~ msgstr "    -b FIŞIER        Adevărat dacă fişierul este bloc special."
+
+#~ msgid "    -c FILE        True if file is character special."
+#~ msgstr "    -c FIŞIER        Adevărat dacă fişierul este caracter special."
+
+#~ msgid "    -d FILE        True if file is a directory."
+#~ msgstr "    -b FIŞIER        Adevărat dacă fişierul este director."
+
+#~ msgid "    -e FILE        True if file exists."
+#~ msgstr "    -e FIŞIER        Adevărat dacă fişierul există."
+
+#~ msgid "    -f FILE        True if file exists and is a regular file."
+#~ msgstr ""
+#~ "    -b FIŞIER        Adevărat dacă fişierul există şi este fişier "
+#~ "obiÅŸnuit (regular)."
+
+#~ msgid "    -g FILE        True if file is set-group-id."
+#~ msgstr ""
+#~ "    -g FIŞIER        Adevărat dacă fişierul are setat id-ul de grup."
+
+#~ msgid "    -h FILE        True if file is a symbolic link.  Use \"-L\"."
+#~ msgstr ""
+#~ "    -h FIŞIER        Adevărat dacă fişierul este legătură simbolică.  "
+#~ "Folosiţi \"-L\"."
+
+#~ msgid "    -L FILE        True if file is a symbolic link."
+#~ msgstr ""
+#~ "    -L FIŞIER        Adevărat dacă fişierul este legătură simbolică."
+
+#~ msgid "    -k FILE        True if file has its \"sticky\" bit set."
+#~ msgstr ""
+#~ "    -k FIŞIER        Adevărat dacă fişierul are setat \"sticky\" bit."
+
+#~ msgid "    -p FILE        True if file is a named pipe."
+#~ msgstr ""
+#~ "    -p FIŞIER        Adevărat dacă fişierul este o legătură(pipe) numită."
+
+#~ msgid "    -r FILE        True if file is readable by you."
+#~ msgstr "    -r FIŞIER        Adevărat dacă fişierul poate fi citit de tine."
+
+#~ msgid "    -s FILE        True if file exists and is not empty."
+#~ msgstr "    -s FIŞIER        Adevărat dacă fişierul există şi nu este vid."
+
+#~ msgid "    -S FILE        True if file is a socket."
+#~ msgstr "    -S FIŞIER        Adevărat dacă fişierul este un socket."
+
+#~ msgid "    -t FD          True if FD is opened on a terminal."
+#~ msgstr "    -t FD          Adevărat dacă FD este deschis într-un terminal."
+
+#~ msgid "    -u FILE        True if the file is set-user-id."
+#~ msgstr "    -u FIŞIER        Adevărat dacă fişierul are setat user id-ul."
+
+#~ msgid "    -w FILE        True if the file is writable by you."
+#~ msgstr "    -w FIŞIER        Adevărat dacă fişierul poate fi scris de tine."
+
+#~ msgid "    -x FILE        True if the file is executable by you."
+#~ msgstr ""
+#~ "    -x FIŞIER        Adevărat dacă fişierul poate fi executat de către "
+#~ "tine."
+
+#~ msgid "    -O FILE        True if the file is effectively owned by you."
+#~ msgstr ""
+#~ "    -O FIŞIER        Adevărat dacă fişierul este efectiv propriu(owned) "
+#~ "Å£ie."
+
+#~ msgid ""
+#~ "    -G FILE        True if the file is effectively owned by your group."
+#~ msgstr ""
+#~ "    -O FIŞIER        Adevărat dacă fişierul este efectiv propriu(owned) "
+#~ "grupului tău."
+
+#~ msgid "  FILE1 -nt FILE2  True if file1 is newer than (according to"
+#~ msgstr ""
+#~ "  FIŞIER1 -nt FIŞIER2  Adevărat dacă fişier1 este mai nou decât (potrivit "
+
+#~ msgid "                   modification date) file2."
+#~ msgstr "                   datei modificării) fişier2."
+
+#~ msgid "  FILE1 -ot FILE2  True if file1 is older than file2."
+#~ msgstr ""
+#~ "  FIŞIER1 -ot FIŞIER2  Adevărat dacă fişier1 este mai vechi decât fişier2."
+
+#~ msgid "  FILE1 -ef FILE2  True if file1 is a hard link to file2."
+#~ msgstr ""
+#~ "  FIŞIER1 -ef FIŞIER2  Adevărat dacă fişier1 este hard link către fişier2."
+
+#~ msgid "String operators:"
+#~ msgstr "Operatori de ÅŸiruri:"
+
+#~ msgid "    -z STRING      True if string is empty."
+#~ msgstr "    -z ŞIR      Adevărat dacă şirul este vid."
+
+#~ msgid "    -n STRING"
+#~ msgstr "    -n ÅžIR"
+
+#~ msgid "    STRING         True if string is not empty."
+#~ msgstr "    ŞIR      Adevărat dacă şirul nu este vid."
+
+#~ msgid "    STRING1 = STRING2"
+#~ msgstr "    ÅžIR1 = ÅžIR2"
+
+#~ msgid "                   True if the strings are equal."
+#~ msgstr "                   Adevărat dacă şirurile sunt egale."
+
+#~ msgid "    STRING1 != STRING2"
+#~ msgstr "    ÅžIR1 != ÅžIR2"
+
+#~ msgid "                   True if the strings are not equal."
+#~ msgstr "                   Adevărat dacă şirurile nu sunt egale."
+
+#~ msgid "    STRING1 < STRING2"
+#~ msgstr "    ÅžIR1 < ÅžIR2"
+
+#~ msgid ""
+#~ "                   True if STRING1 sorts before STRING2 lexicographically"
+#~ msgstr ""
+#~ "                   Adevărat dacă ŞIR1 se ordonează lexical înaintea lui "
+#~ "ÅžIR2"
+
+#~ msgid "    STRING1 > STRING2"
+#~ msgstr "    ÅžIR1 > ÅžIR2"
+
+#~ msgid ""
+#~ "                   True if STRING1 sorts after STRING2 lexicographically"
+#~ msgstr ""
+#~ "                   Adevărat dacă ŞIR1 se ordonează lexical după ŞIR2"
+
+#~ msgid "Other operators:"
+#~ msgstr "Alţi operatori:"
+
+#~ msgid "    ! EXPR         True if expr is false."
+#~ msgstr "    ! EXPR         Adevărat dacă expr e falsă."
+
+#~ msgid "    EXPR1 -a EXPR2 True if both expr1 AND expr2 are true."
+#~ msgstr "    EXPR1 -a EXPR2 Adevărat dacă şi expr1 ŞI expr2 sunt adevărate."
+
+#~ msgid "    EXPR1 -o EXPR2 True if either expr1 OR expr2 is true."
+#~ msgstr ""
+#~ "    EXPR1 -a EXPR2 Adevărat dacă una din expr1 sau expr2 e adevărată."
+
+#~ msgid "    arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,"
+#~ msgstr "    arg1 OP arg2   Teste aritmetice.  OP este unul din -eq, -ne,"
+
+#~ msgid "                   -lt, -le, -gt, or -ge."
+#~ msgstr "                   -lt, -le, -gt, or -ge."
+
+#~ msgid "Arithmetic binary operators return true if ARG1 is equal, not-equal,"
+#~ msgstr "Operatorii aritmetici binari returnează adevărat(true) dacă ARG1 "
+
+#~ msgid ""
+#~ "less-than, less-than-or-equal, greater-than, or greater-than-or-equal"
+#~ msgstr ""
+#~ "este egal cu, nu este egal cu,mai mic, mai mic sau egal, mai mare, mai "
+#~ "mare sau egal"
+
+#~ msgid "than ARG2."
+#~ msgstr "decât ARG2."
+
+#~ msgid "This is a synonym for the \"test\" builtin, but the last"
+#~ msgstr "Acesta este un sinonim pentru comanda internă \"test\", dar ultimul"
+
+#~ msgid "argument must be a literal `]', to match the opening `['."
+#~ msgstr "argument trebuie să fie un `]' literal, pentru a închide un `['."
+
+#~ msgid "Print the accumulated user and system times for processes run from"
+#~ msgstr ""
+#~ "Afişează timpurile acumulate de user şi sistem pentru procesele rulate din"
+
+#~ msgid "the shell."
+#~ msgstr "shell."
+
+#~ msgid "The command ARG is to be read and executed when the shell receives"
+#~ msgstr ""
+#~ "ARGumentele comenzii vor fi citite şi executate când shell-ul primeşte"
+
+#~ msgid "signal(s) SIGNAL_SPEC.  If ARG is absent all specified signals are"
+#~ msgstr ""
+#~ "semnal(e). SIGNAL_SPEC.  Dacă ARGumentul este absent toate semnalele"
+
+#~ msgid "reset to their original values.  If ARG is the null string each"
+#~ msgstr ""
+#~ "specifice sunt resetate la valorile lor originale.  Dacă ARGumentul este "
+#~ "un ÅŸir vid"
+
+#~ msgid "SIGNAL_SPEC is ignored by the shell and by the commands it invokes."
+#~ msgstr ""
+#~ "fiecare SIGNAL_SPEC este ignorat de shell şi de comanda invocată de "
+#~ "acesta."
+
+#~ msgid "If SIGNAL_SPEC is EXIT (0) the command ARG is executed on exit from"
+#~ msgstr ""
+#~ "Dacă SIGNAL_SPEC este EXIT (0) ARGumentele comenzii sunt executate la "
+
+#~ msgid "the shell.  If SIGNAL_SPEC is DEBUG, ARG is executed after every"
+#~ msgstr ""
+#~ "ieşirea din shell.  Dacă SIGNAL_SPEC este DEBUG, ARGument este executat"
+
+#~ msgid "command.  If ARG is `-p' then the trap commands associated with"
+#~ msgstr ""
+#~ "după fiecare comandă.  Dacă ARGument este `-' atunci vor fi afişate "
+#~ "comenzile"
+
+#~ msgid "each SIGNAL_SPEC are displayed.  If no arguments are supplied or if"
+#~ msgstr "trap asociate cu fiecare SIGNAL_SPEC.  Dacă nu sunt furnizaţi "
+
+#~ msgid "only `-p' is given, trap prints the list of commands associated with"
+#~ msgstr ""
+#~ "parametri sau este dat doar `-p', trap afişează lista de comenzi asociate "
+#~ "cu "
+
+#~ msgid ""
+#~ "each signal number.  SIGNAL_SPEC is either a signal name in <signal.h>"
+#~ msgstr ""
+#~ "fiecare număr de semnal.  SIGNAL_SPEC este ori un nume de semnal din "
+#~ "<signal.h>"
+
+#~ msgid ""
+#~ "or a signal number.  `trap -l' prints a list of signal names and their"
+#~ msgstr ""
+#~ "sau un număr de semnal.  `trap -l' tipăreşte o listă de numere de semnale "
+#~ "ÅŸi "
+
+#~ msgid "corresponding numbers.  Note that a signal can be sent to the shell"
+#~ msgstr ""
+#~ "numerele corespunzătoare.  Notaţi că un semnal poate fi trimis shell-ului"
+
+#~ msgid "with \"kill -signal $$\"."
+#~ msgstr "cu \"kill -signal $$\"."
+
+#~ msgid "For each NAME, indicate how it would be interpreted if used as a"
+#~ msgstr ""
+#~ "Pentru fiecare NUME, indică în ce mod va fi interpretat dacă este "
+#~ "utilizat ca"
+
+#~ msgid "If the -t option is used, returns a single word which is one of"
+#~ msgstr ""
+#~ "Dacă este folosită opţiunea -t, returnează un singur cuvânt care este "
+#~ "unul din"
+
+#~ msgid ""
+#~ "`alias', `keyword', `function', `builtin', `file' or `', if NAME is an"
+#~ msgstr ""
+#~ "`alias', `keyword', `function', `builtin', `file' or `', dacă NUME este un"
+
+#~ msgid ""
+#~ "alias, shell reserved word, shell function, shell builtin, disk file,"
+#~ msgstr ""
+#~ "alias, cuvânt rezervat de shell, funcţie de shell, comandă internă, "
+#~ "fiÅŸier de pe disk,"
+
+#~ msgid "or unfound, respectively."
+#~ msgstr "sau negăsit, respectiv."
+
+#~ msgid "If the -p flag is used, either returns the name of the disk file"
+#~ msgstr ""
+#~ "Dacă este utilizat marcajul(flag) -p se returnează fie numele fişierului "
+#~ "de disk"
+
+#~ msgid "that would be executed, or nothing if -t would not return `file'."
+#~ msgstr ""
+#~ "care urmează să fie executat, sau nimic dacă -t nu va returna `fişier'."
+
+#~ msgid "If the -a flag is used, displays all of the places that contain an"
+#~ msgstr "Dacă este folosit -a, se vor afişa toate locurile care conţin"
+
+#~ msgid ""
+#~ "executable named `file'.  This includes aliases and functions, if and"
+#~ msgstr ""
+#~ "un executabil numit `fişier'.  Aceasta include aliasuri şi funcţii, şi "
+#~ "numai"
+
+#~ msgid "only if the -p flag is not also used."
+#~ msgstr "marcajul(flag) -p nu este folosit de asemenea."
+
+#~ msgid "Type accepts -all, -path, and -type in place of -a, -p, and -t,"
+#~ msgstr "Type acceptă -all, -path şi -type în loc de -a, -p şi -t,"
+
+#~ msgid "respectively."
+#~ msgstr "respectiv"
+
+#~ msgid "Ulimit provides control over the resources available to processes"
+#~ msgstr "Ulimit oferă control al resurselor disponibile pentru procesele"
+
+#~ msgid "started by the shell, on systems that allow such control.  If an"
+#~ msgstr ""
+#~ "rulate de shell, în sisteme care permit acest tip de control.  Dacă este"
+
+#~ msgid "option is given, it is interpreted as follows:"
+#~ msgstr "dată o opţiune, este interpretată precum urmează:"
+
+#~ msgid "    -S\tuse the `soft' resource limit"
+#~ msgstr "    -S\tfoloseÅŸte limita `soft' a resursei"
+
+#~ msgid "    -H\tuse the `hard' resource limit"
+#~ msgstr "    -H\tfoloseÅŸte limita `hard' a resursei"
+
+#~ msgid "    -a\tall current limits are reported"
+#~ msgstr "    -a\tsunt raportate toate limitele curente"
+
+#~ msgid "    -c\tthe maximum size of core files created"
+#~ msgstr "    -c\tmărimea maximă de fişiere core creată"
+
+#~ msgid "    -d\tthe maximum size of a process's data segment"
+#~ msgstr "    -d\ttmărimea maximă a unui segment de date al procesului"
+
+#~ msgid "    -m\tthe maximum resident set size"
+#~ msgstr "    -m\tmărimea maximă de rezidenţă"
+
+#~ msgid "    -s\tthe maximum stack size"
+#~ msgstr "    -s\tmărimea maximă a stivei(stack)"
+
+#~ msgid "    -t\tthe maximum amount of cpu time in seconds"
+#~ msgstr "    -t\tsuma maximă a timpului cpu în secunde"
+
+#~ msgid "    -f\tthe maximum size of files created by the shell"
+#~ msgstr "    -f\ttmărimea maximă a fişierelor create de shell"
+
+#~ msgid "    -p\tthe pipe buffer size"
+#~ msgstr "    -p\tmărimea tamponului de legătură (pipe buffer)"
+
+#~ msgid "    -n\tthe maximum number of open file descriptors"
+#~ msgstr "    -n\tnumărul maxim de fişiere deschise"
+
+#~ msgid "    -u\tthe maximum number of user processes"
+#~ msgstr "    -u\tnumărul maxim de procese utilizator"
+
+#~ msgid "    -v\tthe size of virtual memory"
+#~ msgstr "    -v\tmărimea memoriei virtuale"
+
+#~ msgid "If LIMIT is given, it is the new value of the specified resource."
+#~ msgstr "Dacă este dată LIMITĂ, va fi noua valoare a resursei specificate."
+
+#~ msgid "Otherwise, the current value of the specified resource is printed."
+#~ msgstr ""
+#~ "În caz contrar, este tipărită valoarea curentă a resursei specificate."
+
+#~ msgid "If no option is given, then -f is assumed.  Values are in 1k"
+#~ msgstr ""
+#~ "Dacă nu este dată nici o opţiune se presupune -f.  Valorile sunt exprimate"
+
+#~ msgid "increments, except for -t, which is in seconds, -p, which is in"
+#~ msgstr ""
+#~ "în incrementări de 1k, exceptând -t, care este în secunde, -p, care este "
+#~ "în"
+
+#~ msgid "increments of 512 bytes, and -u, which is an unscaled number of"
+#~ msgstr "incrementări de 512 octeţi, şi -u, care este un număr nescalat de"
+
+#~ msgid "processes."
+#~ msgstr "procese."
+
+#~ msgid ""
+#~ "The user file-creation mask is set to MODE.  If MODE is omitted, or if"
+#~ msgstr ""
+#~ "Masca de crearecreation mask) a fişierului utilizatorului e setată la "
+#~ "MOD.  Dacă"
+
+#~ msgid ""
+#~ "`-S' is supplied, the current value of the mask is printed.  The `-S'"
+#~ msgstr ""
+#~ "MOD este omis sau este dat `-S', este tipărită valoarea curentă a "
+#~ "măştii.  Opţiunea"
+
+#~ msgid ""
+#~ "option makes the output symbolic; otherwise an octal number is output."
+#~ msgstr ""
+#~ "`-S' returnează output simbolic; în caz contrar outputul este un număr "
+#~ "octal."
+
+#~ msgid "If MODE begins with a digit, it is interpreted as an octal number,"
+#~ msgstr "Dacă MOD începe cu un digit, este interpretat ca număr octal,"
+
+#~ msgid ""
+#~ "otherwise it is a symbolic mode string like that accepted by chmod(1)."
+#~ msgstr "în caz contrar este un şir mod simbolic premis de chmod(1)."
+
+#~ msgid ""
+#~ "Wait for the specified process and report its termination status.  If"
+#~ msgstr ""
+#~ "Aşteaptă după procesul specificat şi raportează starea de terminare.  Dacă"
+
+#~ msgid "N is not given, all currently active child processes are waited for,"
+#~ msgstr ""
+#~ "N nu este dat,se aşteaptă după toate procesele copil(child) curente,"
+
+#~ msgid "and the return code is zero.  N may be a process ID or a job"
+#~ msgstr ""
+#~ "ÅŸi codul returnat este zero.  N poate fi un ID de proces sau o "
+#~ "specificaţie"
+
+#~ msgid "specification; if a job spec is given, all processes in the job's"
+#~ msgstr "de job; Dacă este dată o specificaţie de job,se aşteaptă după"
+
+#~ msgid "pipeline are waited for."
+#~ msgstr " toate procesele din legătură(pipeline)."
+
+#~ msgid "and the return code is zero.  N is a process ID; if it is not given,"
+#~ msgstr ""
+#~ "şi codul returnat este zero.  N este un ID de proces; dacă nu este dat,"
+
+#~ msgid "all child processes of the shell are waited for."
+#~ msgstr "se va aştepta după doate procesele copil(child) din shell."
+
+#~ msgid "The `for' loop executes a sequence of commands for each member in a"
+#~ msgstr ""
+#~ "Ciclul `for' execută o secvenţă de comenzi pentru fiecare membru dintr-o"
+
+#~ msgid ""
+#~ "list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is"
+#~ msgstr ""
+#~ "listă de elemente.  Dacă `in CUVINTE...;' nu este prezent, atunci `in \"$@"
+#~ "\"'"
+
+#~ msgid ""
+#~ "assumed.  For each element in WORDS, NAME is set to that element, and"
+#~ msgstr ""
+#~ "este presupus.  Pentru fiecare element din CUVINTE, NUME este setat ca "
+#~ "acel"
+
+#~ msgid "the COMMANDS are executed."
+#~ msgstr "element ÅŸi COMENZI sunt executate."
+
+#~ msgid "The WORDS are expanded, generating a list of words.  The"
+#~ msgstr "CUVINTEle sunt expandate, generând o listă de cuvinte.  Setul de"
+
+#~ msgid "set of expanded words is printed on the standard error, each"
+#~ msgstr ""
+#~ "de cuvinte expandate este tipărit la dispozitivul de eroare standard, "
+#~ "fiecare"
+
+#~ msgid "preceded by a number.  If `in WORDS' is not present, `in \"$@\"'"
+#~ msgstr ""
+#~ "fiind precedat de un număr.  Dacă `in CUVINTE' nu este prezent, `in \"$@"
+#~ "\"'"
+
+#~ msgid "is assumed.  The PS3 prompt is then displayed and a line read"
+#~ msgstr ""
+#~ "este presupus.  Promptul PS3 este apoi afişat şi o linie va fi citită de"
+
+#~ msgid "from the standard input.  If the line consists of the number"
+#~ msgstr ""
+#~ "la intrare(input) standard.  Dacă linia e alcătuită dintr-unul din "
+#~ "numerele"
+
+#~ msgid "corresponding to one of the displayed words, then NAME is set"
+#~ msgstr "corespunzătoare unuia din cuvintele afişate, atunci NUME este setat"
+
+#~ msgid "to that word.  If the line is empty, WORDS and the prompt are"
+#~ msgstr ""
+#~ "drept cuvântul respectiv.  Dacă linia este vidă, CUVINTEle şi promptul "
+#~ "sunt"
+
+#~ msgid "redisplayed.  If EOF is read, the command completes.  Any other"
+#~ msgstr ""
+#~ "reafişate.  Dacă se citeşte EOF, comanda ajunge la sfârşit.  Orice altă"
+
+#~ msgid "value read causes NAME to be set to null.  The line read is saved"
+#~ msgstr ""
+#~ "valoare citită va face ca NUMEle setat să fie setat null.  Linia citită "
+#~ "este salvată"
+
+#~ msgid "in the variable REPLY.  COMMANDS are executed after each selection"
+#~ msgstr ""
+#~ "în variabila RĂSPUNS.  COMENZIle sunt executate după fiecare selecţie"
+
+#~ msgid "until a break or return command is executed."
+#~ msgstr "până când se execută o comandă break sau return."
+
+#~ msgid "Selectively execute COMMANDS based upon WORD matching PATTERN.  The"
+#~ msgstr ""
+#~ "Execută selectiv COMENZI bazându-se pe potrivirea CUVÂNTului în TIPAR."
+
+#~ msgid "`|' is used to separate multiple patterns."
+#~ msgstr "  `|' este folosit pentru a separa mai multe tipare."
+
+#~ msgid ""
+#~ "The if COMMANDS are executed.  If the exit status is zero, then the then"
+#~ msgstr ""
+#~ "COMENZIle if sunt executate.  Dacă starea de ieşire este zero, atunc"
+
+#~ msgid ""
+#~ "COMMANDS are executed.  Otherwise, each of the elif COMMANDS are executed"
+#~ msgstr ""
+#~ "COMENZIle then sunt executate.  ÃŽn caz contrar, fiecare din COMENZIle "
+#~ "elif sunt executate"
+
+#~ msgid ""
+#~ "in turn, and if the exit status is zero, the corresponding then COMMANDS"
+#~ msgstr ""
+#~ "pe rând, şi dacă starea de ieşire este zero, atunci COMENZIle then "
+#~ "corespunzătoare"
+
+#~ msgid ""
+#~ "are executed and the if command completes.  Otherwise, the else COMMANDS"
+#~ msgstr ""
+#~ "sunt executate şi comanda if se termină.  În caz contrar, COMENZIle else"
+
+#~ msgid ""
+#~ "are executed, if present.  The exit status is the exit status of the last"
+#~ msgstr ""
+#~ "sunt executate, în cazul în care sunt prezente.  Starea de ieşire este "
+#~ "starea de ieÅŸire"
+
+#~ msgid "command executed, or zero if no condition tested true."
+#~ msgstr ""
+#~ "a ultimei comenzi executate, sau zero dacă nici o condiţie nu s-a dovedit "
+#~ "adevărată."
+
+#~ msgid "Expand and execute COMMANDS as long as the final command in the"
+#~ msgstr "Expandează şi execută COMENZI atâta timp cât comanda finală din"
+
+#~ msgid "`while' COMMANDS has an exit status of zero."
+#~ msgstr "COMENZIle `while' au o stare de ieÅŸire de zero."
+
+#~ msgid "`until' COMMANDS has an exit status which is not zero."
+#~ msgstr "COMENZIle `until' au o stare de ieşire diferită de zero."
+
+#~ msgid "Create a simple command invoked by NAME which runs COMMANDS."
+#~ msgstr "Crează o comandă simplă invocată de NUME care rulează COMENZI."
+
+#~ msgid "Arguments on the command line along with NAME are passed to the"
+#~ msgstr "Parametrii din linia de comandă împreună cu NUMEle sunt pasaţi"
+
+#~ msgid "function as $0 .. $n."
+#~ msgstr "funcţiei drept $0 .. $n."
+
+#~ msgid "Run a set of commands in a group.  This is one way to redirect an"
+#~ msgstr ""
+#~ "Rulează un set de comenzi dintr-un grup.  Aceasta este o cale de a "
+#~ "redirecta un"
+
+#~ msgid "entire set of commands."
+#~ msgstr "întreg set de comenzi."
+
+#~ msgid "This is similar to the `fg' command.  Resume a stopped or background"
+#~ msgstr ""
+#~ "Aceasta este similară comenzii `fg'.  Continuă(resume) un job stopat sau "
+#~ "din"
+
+#~ msgid "job.  If you specifiy DIGITS, then that job is used.  If you specify"
+#~ msgstr ""
+#~ "fundal(background).  Dacă se specifică DIGIŢI, atunci este folosit acel "
+#~ "job.  Dacă"
+
+#~ msgid ""
+#~ "WORD, then the job whose name begins with WORD is used.  Following the"
+#~ msgstr ""
+#~ "se specifică CUVÂNT, atunci e folosit jobul al cărui nume începe cu "
+#~ "CUVÂNT."
+
+#~ msgid "job specification with a `&' places the job in the background."
+#~ msgstr ""
+#~ "Specificând jobului un `&' după, va plasa jobul în fundal(background)."
+
+#~ msgid "BASH_VERSION    The version numbers of this Bash."
+#~ msgstr "BASH_VERSION    Numărul de versiune a acestui Bash."
+
+#~ msgid "CDPATH          A colon separated list of directories to search"
+#~ msgstr ""
+#~ "CDPATH          O listă de directoare separată prin două-puncte pentru a "
+#~ "se"
+
+#~ msgid "\t\twhen the argument to `cd' is not found in the current"
+#~ msgstr ""
+#~ "\t\tcăuta atunci când parametrii specificaţi comenzii `cd' nu sunt găsiţi "
+#~ "în"
+
+#~ msgid "\t\tdirectory."
+#~ msgstr "\t\tdirectorul curent."
+
+#~ msgid ""
+#~ "HISTFILE        The name of the file where your command history is stored."
+#~ msgstr ""
+#~ "HISTFILE        Numele fiÅŸierului unde istoricul comenzilor voastre este "
+#~ "stocat."
+
+#~ msgid "HISTFILESIZE    The maximum number of lines this file can contain."
+#~ msgstr ""
+#~ "HISTFILESIZE    Numărul maxim de linii pe care acest fişier poate să le "
+#~ "conţină."
+
+#~ msgid "HISTSIZE        The maximum number of history lines that a running"
+#~ msgstr ""
+#~ "HISTSIZE        Numărul maxim de linii de istoric care pot fi accesate"
+
+#~ msgid "\t\tshell can access."
+#~ msgstr "\t\tde un shell activ."
+
+#~ msgid "HOME            The complete pathname to your login directory."
+#~ msgstr "HOME            Calea completă către directorul vostru de login."
+
+#~ msgid ""
+#~ "HOSTTYPE        The type of CPU this version of Bash is running under."
+#~ msgstr ""
+#~ "HOSTTYPE        Tipul de CPU pe care rulează această versiune de Bash."
+
+#~ msgid ""
+#~ "IGNOREEOF       Controls the action of the shell on receipt of an EOF"
+#~ msgstr ""
+#~ "IGNOREEOF       Controlează acţiunea shell-ului la întâlnirea unui "
+#~ "caracter"
+
+#~ msgid "\t\tcharacter as the sole input.  If set, then the value"
+#~ msgstr ""
+#~ "\t\tEOF ca singură intrare(input).  Dacă este setat, atunci valoarea"
+
+#~ msgid "\t\tof it is the number of EOF characters that can be seen"
+#~ msgstr "\t\tacestuia este numărul de caractere EOF care pot fi întâlnite"
+
+#~ msgid "\t\tin a row on an empty line before the shell will exit"
+#~ msgstr "\t\tpe rând într-o linie vidă înainte de ieşirea shell-ului."
+
+#~ msgid "\t\t(default 10).  When unset, EOF signifies the end of input."
+#~ msgstr ""
+#~ "\t\t(implicit 10).  Când este desetat(unset), EOF semnifică sfârşitul "
+#~ "intrării(input)."
+
+#~ msgid "MAILCHECK\tHow often, in seconds, Bash checks for new mail."
+#~ msgstr ""
+#~ "MAILCHECK\tCât de des, în secunde, Bash-ul să verifice dacă există mail "
+#~ "nou."
+
+#~ msgid "MAILPATH\tA colon-separated list of filenames which Bash checks"
+#~ msgstr ""
+#~ "MAILPATH\tO listă de fişiere separate prin două-puncte pe care Bash o "
+#~ "verifică"
+
+#~ msgid "\t\tfor new mail."
+#~ msgstr "\t\tpentru mail nou."
+
+#~ msgid "OSTYPE\t\tThe version of Unix this version of Bash is running on."
+#~ msgstr ""
+#~ "OSTYPE\t\tVersiunea de Unix pe care această versiune de Bash rulează."
+
+#~ msgid "PATH            A colon-separated list of directories to search when"
+#~ msgstr ""
+#~ "PATH            O listă de directoare separată prin două-puncte care se va"
+
+#~ msgid "\t\tlooking for commands."
+#~ msgstr "\t\tindexa în căutarea comenzilor."
+
+#~ msgid "PROMPT_COMMAND  A command to be executed before the printing of each"
+#~ msgstr ""
+#~ "PROMPT_COMMAND  O comandă care va fi executată înainte de tipărirea "
+#~ "fiecărui"
+
+#~ msgid "\t\tprimary prompt."
+#~ msgstr "\t\tprompt primar."
+
+#~ msgid "PS1             The primary prompt string."
+#~ msgstr "PS1             Åžirul promptului primar."
+
+#~ msgid "PS2             The secondary prompt string."
+#~ msgstr "PS2             Åžirul promptului secundar."
+
+#~ msgid "TERM            The name of the current terminal type."
+#~ msgstr "TERM            Numele tipului de terminal curent."
+
+#~ msgid "auto_resume     Non-null means a command word appearing on a line by"
+#~ msgstr ""
+#~ "auto_resume     Dacă nu e vid rezultă că un cuvânt comandă ce apare pe o "
+#~ "linie"
+
+#~ msgid "\t\titself is first looked for in the list of currently"
+#~ msgstr "\t\tsingur este prima dată căutat în lista "
+
+#~ msgid "\t\tstopped jobs.  If found there, that job is foregrounded."
+#~ msgstr ""
+#~ "\t\tjoburilor.curente stopate.  Dacă este găsit acolo, acel job este adus "
+#~ "în prim-plan(foreground)."
+
+#~ msgid "\t\tA value of `exact' means that the command word must"
+#~ msgstr "\t\tO valoare de `exact' înseamnă că acel cuvânt comandă trebuie"
+
+#~ msgid "\t\texactly match a command in the list of stopped jobs.  A"
+#~ msgstr ""
+#~ "\t\tsă se potrivească perfect unei comenzi din lista de joburi stopate.  O"
+
+#~ msgid "\t\tvalue of `substring' means that the command word must"
+#~ msgstr "\t\tvaloare de `substring' înseamnă că acel cuvânt comandă trebuie"
+
+#~ msgid "\t\tmatch a substring of the job.  Any other value means that"
+#~ msgstr ""
+#~ "\t\tsă se potrivească unui subşir al jobului.  Orice altă valoare "
+#~ "înseamnă că"
+
+#~ msgid "\t\tthe command must be a prefix of a stopped job."
+#~ msgstr "\t\tacea comandă trebuie să fie prefixul unui job stopat."
+
+#~ msgid "command_oriented_history"
+#~ msgstr "command_oriented_history"
+
+#~ msgid ""
+#~ "                Non-null means to save multiple-line commands together on"
+#~ msgstr ""
+#~ "                Nevid reprezintă salvarea mai multor linii de comandă "
+#~ "împreună într-o"
+
+#~ msgid "                a single history line."
+#~ msgstr "                singură linie de istoric."
+
+#~ msgid "histchars       Characters controlling history expansion and quick"
+#~ msgstr ""
+#~ "histchars       Caractere care controlează expansiunea istoricului şi"
+
+#~ msgid "\t\tsubstitution.  The first character is the history"
+#~ msgstr ""
+#~ "\t\tsubstituţii rapide.  Primul caracter este caracterul de substituţie al"
+
+#~ msgid "\t\tsubstitution character, usually `!'.  The second is"
+#~ msgstr "\t\tistoricului, de obicei `!'.  Al doilea este"
+
+#~ msgid "\t\tthe `quick substitution' character, usually `^'.  The"
+#~ msgstr "\t\tcaracterul de `quick substitution', de obicei `^'.  Al treilea"
+
+#~ msgid "\t\tthird is the `history comment' character, usually `#'."
+#~ msgstr "\t\teste caracterul de `history comment', de obicei `#'."
+
+#~ msgid "HISTCONTROL\tSet to a value of `ignorespace', it means don't enter"
+#~ msgstr ""
+#~ "HISTCONTROL\tSetează o valoare de `ignorespace', care înseamnă să nu"
+
+#~ msgid "\t\tlines which begin with a space or tab on the history"
+#~ msgstr "\t\tintroduci în lista de istoric linii care încep cu un"
+
+#~ msgid "\t\tlist.  Set to a value of `ignoredups', it means don't"
+#~ msgstr ""
+#~ "\t\tspaţiu sau un tab.  Setează o valoare de  `ignoredups', care înseamnă"
+
+#~ msgid "\t\tenter lines which match the last entered line.  Set to"
+#~ msgstr ""
+#~ "\t\ta nu se introduce linii care sunt asemănătoare ultimei linii "
+#~ "introduse."
+
+#~ msgid "\t\t`ignoreboth' means to combine the two options.  Unset,"
+#~ msgstr ""
+#~ "\t\tSetează o valaore de `ignoreboth' însemnând combinarea celor două "
+#~ "opţiuni."
+
+#~ msgid "\t\tor set to any other value than those above means to save"
+#~ msgstr ""
+#~ "\t\t  Desetat(unset) sau setat la orice altă valoare decât acelea de mai "
+#~ "sus"
+
+#~ msgid "\t\tall lines on the history list."
+#~ msgstr "\t\taînseamnă salvarea tuturor liniilor în lista istoricului."
+
+#~ msgid "Adds a directory to the top of the directory stack, or rotates"
+#~ msgstr ""
+#~ "Adaugă un director în partea superioară a stivei de directoare, sau "
+#~ "roteÅŸte"
+
+#~ msgid "the stack, making the new top of the stack the current working"
+#~ msgstr "stiva, făcând noul element superior al listei directorul curent"
+
+#~ msgid "directory.  With no arguments, exchanges the top two directories."
+#~ msgstr ""
+#~ "de lucru.  Fără parametri, interchimbă cele două directoare superioare."
+
+#~ msgid "+N\tRotates the stack so that the Nth directory (counting"
+#~ msgstr "+N\tRoteşte stiva astfel încât al N-ulea director (numărând"
+
+#~ msgid "\tfrom the left of the list shown by `dirs') is at the top."
+#~ msgstr "\tde la stânga listei afişată de `dirs') va fi în vârf(top)."
+
+#~ msgid "-N\tRotates the stack so that the Nth directory (counting"
+#~ msgstr "-N\tRoteşte stiva astfel încât al N-ulea director (numărând"
+
+#~ msgid "\tfrom the right) is at the top."
+#~ msgstr "\tde la dreapta) va fi în vârf."
+
+#~ msgid "-n\tsuppress the normal change of directory when adding directories"
+#~ msgstr ""
+#~ "-n\tinhibă schimbarea normală de directoare la adăugarea directoarelor"
+
+#~ msgid "\tto the stack, so only the stack is manipulated."
+#~ msgstr "\tîn stivă, astfel încât doar stiva să fie manipulată."
+
+#~ msgid "dir\tadds DIR to the directory stack at the top, making it the"
+#~ msgstr "dir\tadaugă DIR în vârful stivei de directoare, făcându-l"
+
+#~ msgid "You can see the directory stack with the `dirs' command."
+#~ msgstr "Puteţi vedea stiva de directoare cu ajutorul comenzii `dirs'."
+
+#~ msgid "Removes entries from the directory stack.  With no arguments,"
+#~ msgstr "Şterge intrările din stiva de directoare.  Fără parametri, "
+
+#~ msgid "removes the top directory from the stack, and cd's to the new"
+#~ msgstr "şterge directorul superior din stivă, şi face cd la noul"
+
+#~ msgid "+N\tremoves the Nth entry counting from the left of the list"
+#~ msgstr "+N\tşterge al N-ulea element numărând din stânga listei"
+
+#~ msgid "\tshown by `dirs', starting with zero.  For example: `popd +0'"
+#~ msgstr "\tafişate de `dirs', începând cu zero.  De exemplu: `popd +0'"
+
+#~ msgid "\tremoves the first directory, `popd +1' the second."
+#~ msgstr "\tÅŸterge primul director, `popd +1' al doilea."
+
+#~ msgid "-N\tremoves the Nth entry counting from the right of the list"
+#~ msgstr "-N\tşterge al N-ulea element numărând din dreapta listei"
+
+#~ msgid "\tshown by `dirs', starting with zero.  For example: `popd -0'"
+#~ msgstr "\tafişate de `dirs', începând cu zero.  De exemplu: `popd -0'"
+
+#~ msgid "\tremoves the last directory, `popd -1' the next to last."
+#~ msgstr "\tÅŸterge ultimul director, `popd -1' penultimul."
+
+#~ msgid ""
+#~ "-n\tsuppress the normal change of directory when removing directories"
+#~ msgstr ""
+#~ "-n\tinhibă schimbarea normală de directoare când se şterg diurectoare"
+
+#~ msgid "\tfrom the stack, so only the stack is manipulated."
+#~ msgstr "\tdin stivă, astfel încât numai stiva să fie manipulată."
+
+#~ msgid "Display the list of currently remembered directories.  Directories"
+#~ msgstr "Afişează lista curentă de directoare reţinute.  Directoarele"
+
+#~ msgid "find their way onto the list with the `pushd' command; you can get"
+#~ msgstr ""
+#~ "îşi gasesc locul în listă cu ajutorul comenzii `pushd'; puteţi merge"
+
+#~ msgid "back up through the list with the `popd' command."
+#~ msgstr "prin listă cu ajutorul comenzii `popd'."
+
+#~ msgid ""
+#~ "The -l flag specifies that `dirs' should not print shorthand versions"
+#~ msgstr ""
+#~ "Parametrul(flag) -l specifică faptul că  `dirs' nu ar trebui să "
+#~ "tipărească "
+
+#~ msgid ""
+#~ "of directories which are relative to your home directory.  This means"
+#~ msgstr ""
+#~ "versiuni prescurtate ale directoarelor care au legătură(relative) cu home-"
+#~ "directory-ul."
+
+#~ msgid "that `~/bin' might be displayed as `/homes/bfox/bin'.  The -v flag"
+#~ msgstr ""
+#~ "  Aceasta înseamnă că `~/bin' poate fi afişat ca `/homes/bfox/bin'  "
+#~ "Parametrul"
+
+#~ msgid "causes `dirs' to print the directory stack with one entry per line,"
+#~ msgstr ""
+#~ "-v face ca `dirs' să afişeze stiva de directoare doar câte o intrare pe "
+#~ "linie,"
+
+#~ msgid ""
+#~ "prepending the directory name with its position in the stack.  The -p"
+#~ msgstr "prefixând numele directorului cu poziţia în stivă.  Parametrul -p"
+
+#~ msgid "flag does the same thing, but the stack position is not prepended."
+#~ msgstr "face acelaşi lucru, dar poziţia în stivă nu este prefix."
+
+#~ msgid ""
+#~ "The -c flag clears the directory stack by deleting all of the elements."
+#~ msgstr ""
+#~ "Parametrul(flag) -c ÅŸterge stiva de directoare prin ÅŸtergerea tuturor "
+#~ "elementelor."
+
+#~ msgid ""
+#~ "+N\tdisplays the Nth entry counting from the left of the list shown by"
+#~ msgstr "+N\tafişează a N-a intrare numărând de la stânga listei afişate de"
+
+#~ msgid "\tdirs when invoked without options, starting with zero."
+#~ msgstr "\tdirs atunci când e invocată fără opţiuni, începând cu zero."
+
+#~ msgid ""
+#~ "-N\tdisplays the Nth entry counting from the right of the list shown by"
+#~ msgstr "-N\tafişează a N-a intrare numărând de la dreapta listei afişate de"
+
+#~ msgid "Toggle the values of variables controlling optional behavior."
+#~ msgstr ""
+#~ "Schimbă(toggle) valorile variabilelor, controlând comportamentul opţional."
+
+#~ msgid "The -s flag means to enable (set) each OPTNAME; the -u flag"
+#~ msgstr ""
+#~ "Parametrul -s înseamnă activarea(setarea) fiecărei NUME_OPT; parametrul -u"
+
+#~ msgid "unsets each OPTNAME.  The -q flag suppresses output; the exit"
+#~ msgstr "desetează(unset) fiecare NUME_OPT.  Parametrul -q inhibă output-ul;"
+
+#~ msgid "status indicates whether each OPTNAME is set or unset.  The -o"
+#~ msgstr ""
+#~ "starea de ieşire indică dacă fiecare NUME_OPT este setat sau desetat."
+
+#~ msgid "option restricts the OPTNAMEs to those defined for use with"
+#~ msgstr ""
+#~ "  Parametrul -o restricţionează NUME_OPT la acelea definite pentru a fi "
+
+#~ msgid "`set -o'.  With no options, or with the -p option, a list of all"
+#~ msgstr ""
+#~ "folosite cu `set -o'.  Fără nici o opţiune, sau cu opţiunea -p, este "
+#~ "afişată"
+
+#~ msgid "settable options is displayed, with an indication of whether or"
+#~ msgstr ""
+#~ "o listă a tuturor opţiunilor setabile, ceea ce indică dacă fiecare este"
+
+#~ msgid "not each is set."
+#~ msgstr "setată sau nu."
diff --git a/po/ru.gmo b/po/ru.gmo
new file mode 100644
index 0000000..f16a537
--- /dev/null
+++ b/po/ru.gmo
diff --git a/po/ru.po b/po/ru.po
new file mode 100644
index 0000000..99302fc
--- /dev/null
+++ b/po/ru.po
@@ -0,0 +1,8206 @@
+# GNU Bourne Again SHell.
+# Copyright (C) 2002 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+# Ruslan Batdalov <linnando@tolkien.ru>, 2002.
+# Pavel Maryanov <acid@jack.kiev.ua>, 2014, 2018.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: bash 4.4\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2018-04-17 14:09+0300\n"
+"Last-Translator: Pavel Maryanov <acid@jack.kiev.ua>\n"
+"Language-Team: Russian <gnu@d07.ru>\n"
+"Language: ru\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
+"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+"X-Generator: Poedit 2.0.6\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "неправильный индек� ма��ива"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr "%s: удал�ет�� атрибут nameref"
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: не удаёт�� преобразовать индек� в а��оциативный ма��ив"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: недопу�тимый ключ а��оциативного ма��ива"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: не удаёт�� при�воить значение нечи�ловому индек�у"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr ""
+"%s: %s: необходимо и�пользовать индек� при назначении а��оциативному ма��иву"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: не удаёт�� �оздать файл: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr "bash_execute_unix_command: не удаёт�� найти keymap дл� команды"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: первый непробельный �имвол не �вл�ет�� «\"»"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "нет закрывающего «%c» в %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: от�ут�твует разделитель-двоеточие"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "«%s»: не удаёт�� отменить прив�зку"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr "ра�ширение �кобки: не удаёт�� выделить пам�ть дл� %s"
+
+#: braces.c:406
+#, fuzzy, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr "ра�ширение �кобки: не удаёт�� выделить пам�ть дл� %d �лементов"
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr "ра�ширение �кобки: не удало�ь выделить пам�ть дл� «%s»"
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "«%s»: недопу�тимый п�евдоним"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "редактирование �троки не включено"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "«%s»: недопу�тимое название keymap"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: не удаёт�� прочитать файл: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "«%s»: неизве�тное название функции"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s не прив�зан ни к какой клавише.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s можно вызвать через "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "«%s»: не удаёт�� отменить прив�зку"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "�чётчик циклов"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "имеет значение только дл� циклов «for», «while» или «until»"
+
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Возвращает контек�т вызова текущей подпрограммы.\n"
+"    \n"
+"    Е�ли выражение не указано, возвращает «$line $filename».  Е�ли выражение "
+"указано, возвращает\n"
+"    «$line $subroutine $filename». Эти дополнительные данные можно\n"
+"    и�пользовать дл� тра��ировки �тека.\n"
+"    \n"
+"    Значение выражени� означает количе�тво кадров, которое нужно вызвать\n"
+"    дл� возврата к текущему кадру. Первый кадр имеет номер 0.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает 0, е�ли командный проце��ор не выполн�ет функцию, или "
+"выражение\n"
+"    �вл�ет�� допу�тимым."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "�е задана переменна� HOME"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "�лишком много аргументов"
+
+#: builtins/cd.def:342
+msgid "null directory"
+msgstr "нулевой каталог"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "�е задана переменна� OLDPWD"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "�трока %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "предупреждение: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: и�пользование: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: дл� параметра требует�� аргумент"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: требует�� чи�ловой аргумент"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: не найден"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: недопу�тимый параметр"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: недопу�тимое название параметра"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "«%s»: �то недопу�тимый идентификатор"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "недопу�тимое во�ьмеричное чи�ло"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "недопу�тимое ше�тнадцатеричное чи�ло"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "недопу�тимое чи�ло"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: недопу�тимое указание �игнала"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "«%s»: �то не идентификатор проце��а и не допу�тимый указатель задани�"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: переменна� только дл� чтени�"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s за пределами диапазона"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "аргумент"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s за пределами диапазона"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: нет такого задани�"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: нет управлени� задани�ми"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "нет управлени� задани�ми"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: ограниченный режим"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "ограниченный режим"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: �то не не в�троенна� команда bash"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "ошибка запи�и: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "ошибка назначени� атрибутов терминала: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "ошибка получени� атрибутов терминала: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: ошибка определени� текущего каталога: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: неоднозначный указатель задани�"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr "�правка от�ут�твует в �той вер�ии"
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: не удаёт�� выполнить �бро�: %s до�тупен только дл� чтени�"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: не удаёт�� выполнить �бро�"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: недопу�тимое название дей�тви�"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: нет определени� завершени�"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "предупреждение: параметр -F может работать не так, как ожидает��"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "предупреждение: параметр -C может работать не так, как ожидает��"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "�ейча� не выполн�ет функцию завершени�"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "можно и�пользовать только внутри функции"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr "%s: ��ылочна� переменна� не может быть ма��ивом"
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr "%s: переменные nameref, ��ылающие�� �ами на �еб�, не допу�кают��"
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s: кругова� ��ылка на им�"
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "«%s»: недопу�тимое название переменной дл� ��ылки на им�"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "«-f» нельз� и�пользовать дл� �оздани� функций"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: значение функции можно только �читать"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr "%s: при�воение �о�тавного ма��ива в кавычках у�тарело"
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: переменные ма��ива нельз� уничтожить таким образом"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: не удаёт�� преобразовать а��оциативный ма��ив в индек�ированный"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "динамиче�ка� загрузка недо�тупна"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "не удаёт�� открыть общий объект %s: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "не удаёт�� найти %s в общем объекте %s: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: не загружает�� динамиче�ки"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr "загрузка функции %s завершила�ь ошибкой (%d): не загружена"
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: не загружает�� динамиче�ки"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: не удаёт�� удалить: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: �то каталог"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: �то не обычный файл"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: файл �лишком велик"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: не удаёт�� запу�тить бинарный файл"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: не удаёт�� запу�тить: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "выход\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "не командный проце��ор login: и�пользуйте «exit»"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Е�ть о�тановленные задани�.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Е�ть выполн�емые задани�.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "команда не найдена"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "указание журнала команд"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: не удаёт�� открыть временный файл: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "текущий"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "задание %d запущено без возможно�ти управлени�"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: недопу�тимый параметр — %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: дл� параметра требует�� аргумент — %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "х�ширование отключено"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: таблица х�шей пу�та�\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "вызовы\tкоманда\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Команды, �оответ�твующие ключевому �лову «"
+msgstr[1] "Команды, �оответ�твующие ключевым �ловам «"
+msgstr[2] "Команды, �оответ�твующие ключевым �ловам «"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"нет разделов �правки, �оответ�твующих «%s».  Попробуйте вве�ти «help help» "
+"или «man -k %s» или «info %s»."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: не удаёт�� открыть файл: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Показанные ниже команды определены внутри командного проце��ора.  Чтобы "
+"выве�ти полный �пи�ок, введите «help».\n"
+"Чтобы выве�ти �правку по функции «name», введите «help name».\n"
+"Чтобы выве�ти �правку по командному проце��ору, введите «info bash».\n"
+"Чтобы выве�ти �правку по командам, которые от�ут�твуют в �том �пи�ке, "
+"введите «man -k» или «info».\n"
+"\n"
+"Звёздочка (*) р�дом � названием команды означает, что �та команда "
+"отключена.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "нельз� и�пользовать больше одного параметра -anrw"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "положение журнала команд"
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: недопу�тима� метка времени"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: не удало�ь ра�ширить журнал команд"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: ошибка inlib"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "� параметром «-x» нельз� указывать другие параметры"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: аргументами должны быть идентификаторы проце��ов или заданий"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "�еизве�тна� ошибка"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "ожидает�� выражение"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: �то не индек�ированный ма��ив"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: недопу�тимое указание де�криптора файла"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: invalid недопу�тимый де�криптор файла: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: недопу�тимое чи�ло �трок"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: недопу�тимое начало ма��ива"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: недопу�тимый квант обратного вызова"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "пу�тое им� переменной ма��ива"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "требует�� поддержка переменных ма��ива"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "«%s»: от�ут�твует �имвол форматировани�"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "«%c»: недопу�тимое указание формата времени"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "«%c»: недопу�тимый �имвол форматировани�"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "предупреждение: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "ошибка анализа формата: %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "от�ут�твует ше�тнадцатерична� цифра дл� \\x"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "от�ут�твует цифра Юникода дл� \\%c"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "от�ут�твует другой каталог"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s: недопу�тимый аргумент"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<от�ут�твует текущий каталог>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "�тек каталогов пу�т"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "индек� �тека каталогов"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Выводит �пи�ок запомненных на данный момент каталогов.  Каталоги\n"
+"    помещают�� в �пи�ок командой «pushd». Дл� очи�тки\n"
+"    �пи�ка и�пользует�� команда «popd».\n"
+"    \n"
+"    Параметры:\n"
+"      -c\tочи�тить �тек каталогов, удалив из него в�е �лементы\n"
+"      -l\tне выводить каталоги, начинающие�� � тильды (~),\n"
+"    \tкотора� означает домашний каталог\n"
+"      -p\tпоказать �тек по одному каталогу в �троке\n"
+"      -v\tпоказать �тек по одному каталогу в �троке\n"
+"    \tи � номером в �теке\n"
+"    \n"
+"    �ргументы:\n"
+"      +N\tпоказать N-ю запи�ь �лева в �пи�ке каталогов,\n"
+"    \tпоказанного при вызове без параметров, начина� � нул�.\n"
+"    \n"
+"      -N\tпоказать N-ю запи�ь �права в �пи�ке каталогов,\n"
+"\tпоказанного при вызове без параметров, начина� � нул�."
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Добавл�ет каталог в начало �тека каталогов или выполн�ет\n"
+"    ротацию �тека, помеща� в начало �тека текущий рабочий\n"
+"    каталог.  Е�ли аргументы не указаны, мен�ет ме�тами два первых "
+"каталога.\n"
+"    \n"
+"    Параметры:\n"
+"      -n\tпредотвращает обычное изменение каталога при добавлении\n"
+"    \tкаталогов в �тек, чтобы дей�тви� выполн�ли�ь только над �теком.\n"
+"    \n"
+"    �ргументы:\n"
+"      +N\tвыполн�ет ротацию �тека, чтобы N-й каталог (�лева\n"
+"    \tв �пи�ке, показанного командой «dirs», начина� � нул�)\n"
+"    \t�тал первым в �теке.\n"
+"    \n"
+"      -N\tвыполн�ет ротацию �тека, чтобы N-й каталог (�права\n"
+"    \tв �пи�ке, показанного командой «dirs», начина� � нул�)\n"
+"    \t�тал первым в �теке.\n"
+"    \n"
+"      каталог\tдобавл�ет каталог в начало �тека каталогов, дела� его\n"
+"    \tновым текущим каталогом.\n"
+"    \n"
+"    В�троенна� команда dirs показывает �тек каталогов."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Удал�ет запи�и из �тека каталогов.  Е�ли аргументы не указаны,\n"
+"    удал�ет первый каталог из �тека и назначает новый первый каталог.\n"
+"    \n"
+"    Параметры:\n"
+"      -n\tпредотвращает обычное изменение каталога при удалении\n"
+"    \tкаталогов из �тека, чтобы дей�тви� выполн�ли�ь только над �теком.\n"
+"    \n"
+"    �ргументы:\n"
+"      +N\tудал�ет N-ю �лева запи�ь в �пи�ке каталогов,\n"
+"    \tпоказанного командой «dirs», начина� � нул�.  �апример, «popd +0»\n"
+"    \tудал�ет первый каталог, а «popd +1» — второй каталог.\n"
+"    \n"
+"      -N\tудал�ет N-ю �права запи�ь в �пи�ке каталогов,\n"
+"    \tпоказанного командой «dirs», начина� � нул�.  �апример, «popd -0»\n"
+"    \tудал�ет по�ледний каталог, а «popd -1» — предпо�ледний каталог.\n"
+"    \n"
+"    В�троенна� команда dirs показывает �тек каталогов."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: недопу�тимое указание тайм-аута"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "ошибка чтени�: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr "возврат можно выполнить только из функции или и�ходного �крипта"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "нельз� одновременно �бро�ить функцию и переменную"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: �то не переменна� ма��ива"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: �то не функци�"
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr "%s: не удаёт�� �к�портировать"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "�чётчик �мещений"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "нельз� одновременно задать и �бро�ить параметры командного проце��ора"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: недопу�тимое название параметра командного проце��ора"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "требует�� аргумент � именем файла"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: файл не найден"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "не удаёт�� прио�тановить"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "не удаёт�� прио�тановить командный проце��ор login"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s — �то п�евдонимом дл� «%s»\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s — �то ключевое �лово командного проце��ора\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s — �то функци�\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s — �то �пециальна� в�троенна� команда bash\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s — �то в�троенна� команда bash\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s �вл�ет�� %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "дл� %s вычи�лен х�ш (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: недопу�тимый аргумент ограничени�"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "«%c»: недопу�тима� команда"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: не удаёт�� получить ограничение: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "ограничение"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: не удаёт�� изменить ограничение: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "во�ьмеричное чи�ло"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "«%c»: недопу�тимый оператор �имвольного режима"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "«%c»: недопу�тимый знак �имвольного режима"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " �трока "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "по�ледн�� команда: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Прерывание..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr "И�ФО: "
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "неизве�тна� ошибка команды"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "неверный тип команды"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "неверный �оединитель"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "ошибка перехода"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: не заданы границы переменной"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\aпревышено врем� ожидани� ввода: auto-logout\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "не удаёт�� перенаправить �тандартный ввод из /dev/null: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "TIMEFORMAT: «%c»: недопу�тимый �имвол форматировани�"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr "execute_coproc: coproc [%d:%s] в�ё ещё �уще�твует"
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "ошибка конвейера"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr "eval: до�тигнут мак�имальный уровень вложенно�ти eval (%d)"
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr "%s: до�тигнут мак�имальный уровень вложенно�ти source (%d)"
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr "%s: до�тигнут мак�имальный уровень вложенно�ти функций (%d)"
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr ""
+"%s: ограниченный режим: в названи�х команд нельз� и�пользовать ко�ую черту "
+"«/»"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: команда не найдена"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: неверный интерпретатор"
+
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: не удаёт�� запу�тить бинарный файл: %s"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "«%s»: �то �пециальна� в�троенна� команда"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "не удаёт�� �копировать файловый де�криптор %d в %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "�лишком много вложенных выражений"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "отрицательное переполнение �тека вложенных выражений"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "�интак�иче�ка� ошибка в выражении"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "значение можно при�воить только переменной"
+
+#: expr.c:530
+#, fuzzy
+msgid "syntax error in variable assignment"
+msgstr "�интак�иче�ка� ошибка в выражении"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "деление на 0"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "ошибка: недопу�тимый маркер при�воени� выражени�"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "в у�ловном выражении должен быть �имвол «:»"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "�к�понента меньше нул�"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr ""
+"по�ле предварительного инкремента или декремента ожидает�� идентификатор "
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "от�ут�твует �имвол «)»"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "�интак�иче�ка� ошибка: ожидает�� операнд"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "ошибка �интак�и�а: недопу�тимый математиче�кий оператор"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (неверный маркер «%s»)"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "недопу�тимое математиче�кое о�нование"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: недопу�тимое чи�ло �трок"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "�лишком большое значение дл� о�новани�"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: ошибка выражени�\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: нет до�тупа к родитель�ким каталогам"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "не удаёт�� �бро�ить режим nodelay дл� файлового де�криптора %d"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr ""
+"не удаёт�� выделить новый де�криптор дл� входных данных bash из файлового "
+"де�криптора %d"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input: у нового файлового де�криптора %d уже е�ть буфер"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: pgrp pipe"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "идентификатор дочернего проце��а %d принадлежит запущенному заданию %d"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "удаление о�тановленного задани� %d � группой проце��а %ld"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr ""
+"add_process: проце�� � идентификатором %5ld (%s) помечен как в�ё ещё активный"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: нет проце��а � таким идентификатором"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Сигнал %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Завершён"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "О�тановлен"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "О�тановлен (%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "Запущен"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Завершён (%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Выход %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Со�то�ние неизве�тно"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(�тек пам�ти �брошен на ди�к) "
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (рабочий каталог: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "дочерний setpgid (%ld к %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr ""
+"wait: проце�� %ld не �вл�ет�� дочерним проце��ом �того командного проце��ора"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: нет запи�ей проце��а %ld"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: задание %d о�тановлено"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: нет такого задани�"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: выполнение задани� прервано"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: задание %d уже выполн�ет�� в фоновом режиме"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr ""
+"waitchld: включает�� WNOHANG, чтобы предотвратить по�вление неопределённого "
+"блока"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: �трока %d: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (�тек пам�ти �брошен на ди�к)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(рабочий каталог: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: ошибка вызова getpgrp "
+
+#: jobs.c:4447
+#, fuzzy
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: ди�циплина �троки"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: ди�циплина �троки"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "не удаёт�� задать группу проце��а терминала (%d)"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "�тот командный проце��ор не может управл�ть задани�ми"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: ошибка утверждени�: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\\r\n"
+"malloc: %s:%d: утверждение не удало�ь\\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "неизве�тно"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: блок в �пи�ке �вободных затёрт"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: вызван � аргументом уже о�вобождённого блока"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: вызван � аргументом невыделенного блока"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr ""
+"free: обнаружено отрицательное переполнение; mh_nbytes байт за пределами "
+"диапазона"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr ""
+"free: обнаружено отрицательное переполнение; mh_nbytes байт за пределами "
+"диапазона"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: размеры начального и конечного блока отличают��"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: вызван � аргументом невыделенного блока"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr ""
+"realloc: обнаружено отрицательное переполнение; mh_nbytes байт за пределами "
+"диапазона"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr ""
+"realloc: обнаружено отрицательное переполнение; mh_nbytes байт за пределами "
+"диапазона"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: размеры начального и конечного блока отличают��"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: таблица выделени� заполнена запи��ми FIND_ALLOC?\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: %p уже е�ть в таблице как выделенный?\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: %p уже е�ть в таблице как �вободный?\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "недопу�тимое о�нование"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: узел неизве�тен"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: недопу�тима� �лужба"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: недопу�тимое указание �етевого пути"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "�етевые операции не поддерживают��"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: не удаёт�� изменить �зык (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: не удаёт�� изменить �зык (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: не удаёт�� изменить �зык (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: не удаёт�� изменить �зык (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "Дл� ва� е�ть почта в $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "Дл� ва� е�ть почта в $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "Сообщени� в %s были прочитаны\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "�интак�иче�ка� ошибка: требует�� математиче�кое выражение"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "�интак�иче�ка� ошибка: ожидает�� «;»"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "�интак�иче�ка� ошибка: «((%s))»"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: недопу�тимый тип ин�трукции %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr ""
+"блок here-document в �троке %d разделён знаком конца файла (ожидал�� «%s»)"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr ""
+"make_redirection: ин�трукци� перенаправлени� «%d» вышла за пределы диапазона"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+"shell_getc: shell_input_line_size (%zu) превы�ил SIZE_MAX (%lu): �трока "
+"обрезана"
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr "до�тигнуто мак�имальное чи�ло переменных here-document"
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "неожиданный конец файла во врем� пои�ка «%c»"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "неожиданный конец файла во врем� пои�ка «]]»"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "�интак�иче�ка� ошибка в у�ловном выражении: неожиданный маркер «%s»"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "�интак�иче�ка� ошибка в у�ловном выражении"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "неожиданный маркер «%s», ожидал�� «)»"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "ожидает�� �имвол «)»"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "неожиданный аргумент «%s» дл� у�ловного унарного оператора"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "неожиданный аргумент дл� у�ловного унарного оператора"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "неожиданный маркер «%s», ожидает�� у�ловный бинарный оператор"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "ожидает�� у�ловный бинарный оператор"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "неожиданный аргумент «%s» дл� у�ловного бинарного оператора"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "неожиданный аргумент дл� у�ловного бинарного оператора"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "неожиданный маркер «%c» в у�ловной команде"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "неожиданный маркер «%s» в у�ловной команде"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "неожиданный маркер %d в у�ловной команде"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "�интак�иче�ка� ошибка р�дом � неожиданным маркером «%s»"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "�интак�иче�ка� ошибка р�дом � «%s»"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "�интак�иче�ка� ошибка: неожиданный конец файла"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "�интак�иче�ка� ошибка"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Дл� выхода из командного проце��ора и�пользуйте «%s».\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "неожиданный конец файла во врем� пои�ка «)»"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "completion: функци� «%s» не найдена"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr "programmable_completion: %s: возможен бе�конечный цикл повторов"
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: NULL COMPSPEC"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: неверный �оединитель «%d»"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: недопу�тимый идентификатор файла"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: пу�той указатель на файл"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != fileno xtrace fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: «%c»: недопу�тимый �имвол форматировани�"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "файловый де�криптор за пределами диапазона"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: неоднозначное перенаправление"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: не удаёт�� перезапи�ать �уще�твующий файл"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: ограниченный режим: не удаёт�� перенаправить вывод"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "не удаёт�� �оздать временный файл дл� блока here-document: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: не удаёт�� при�воить файловый де�криптор переменной"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "/dev/(tcp|udp)/host/port не поддерживает�� без �ети"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "ошибка перенаправлени�: не удаёт�� �оздать копию файлового де�криптора"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "не удало�ь найти /tmp; �оздайте �тот каталог"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp должен быть допу�тимым названием каталога"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr ""
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: недопу�тимый параметр"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "не удаёт�� у�тановить UID %d: �ффективный UID %d"
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "не удаёт�� у�тановить GID %d: �ффективный GID %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr "не удаёт�� запу�тить отладчик: режим отладки отключён"
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr "%s: �то каталог"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "�е удаёт�� определить название"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, вер�и� %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"И�пользование:\t%s [длинные параметры GNU] [параметры] ...\n"
+"\t\t%s [длинные параметры GNU] [параметры] файл_�крипта ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "Длинные параметры GNU:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Параметры командного проце��ора:\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr ""
+"\t-irsD или -c команда или -O короткие_параметры\t\t(только при запу�ке)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s или -o параметр\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+"Дл� получени� дополнительных �ведений о параметрах командного проце��ора "
+"введите «%s -c \"help set\"».\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr ""
+"Дл� получени� дополнительных �ведений о в�троенных командах введите «%s -c "
+"help».\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "Дл� отправки �ообщений об ошибках и�пользуйте команду «bashbug».\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr "Домашн�� �траница bash: <http://www.gnu.org/software/bash>\n"
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr ""
+"Обща� �правка по и�пользованию программ GNU: <http://www.gnu.org/gethelp/>\n"
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: недопу�тима� операци�"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Фиктивный �игнал"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Отбой"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Прерывание"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Выход"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "�едопу�тима� ин�трукци�"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "Тра��а/ловушка BPT"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "Ин�трукци� ABORT"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "Ин�трукци� EMT"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "И�ключение при обработке чи�ел � плавающей точкой"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Убит"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Ошибка шины"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Ошибка �егментации"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "�еверный �и�темный вызов"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Конвейер не работает"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Сигнал ча�ов"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Прерван"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Срочное �обытие ввода/вывода"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "О�тановлен (�игналом)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Продолжение"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Смерть или о�тановка дочернего проце��а"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "О�тановлен (ввод � tty)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "О�тановлен (вывод на tty)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "Готов к вводу/выводу"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "Ограничение ЦП"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "Ограничение величины файла"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Сигнал ча�ов (виртуальный)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Сигнал ча�ов (профиль)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Окно изменено"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Запи�ь блокирована"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Сигнал пользовател� 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Сигнал пользовател� 2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "Ожидание входных данных HFT"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "неизбежна ошибка питани�"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "неизбежно падение �и�темы"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "проце�� перено�ит�� на другой ЦП"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "программна� ошибка"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "У�тановлен режим монитора HFT"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "Выход из режима монитора HFT"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "По�ледовательно�ть звуков HFT завершена"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "Информационный запро�"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "�еизве�тный номер �игнала %d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "неверна� под�тановка: нет закрывающей «%s» в %s"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: не удаёт�� при�воить �пи�ок �лементу ма��ива"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "не удаёт�� �оздать конвейер дл� под�тановки проце��а"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "не удаёт�� �оздать дочерний проце�� дл� под�тановки"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "не удаёт�� открыть именованный конвейер %s дл� чтени�"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "не удаёт�� открыть именованный конвейер %s дл� запи�и"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr ""
+"не удаёт�� �копировать именованный конвейер %s  в файловый де�криптор %d"
+
+#: subst.c:6213
+msgid "command substitution: ignored null byte in input"
+msgstr "под�тановка команды: во входных данных проигнорирован нулевой байт"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "не удаёт�� �оздать конвейер дл� под�тановки команды"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "не удаёт�� �оздать дочерний проце�� дл� под�тановки команды"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr ""
+"command_substitute: не удаёт�� �копировать конвейер в файловый де�криптор 1"
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: недопу�тимое название переменной дл� ��ылки на им�"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: недопу�тимое непр�мое ра�крытие"
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr "%s: недопу�тимое им� переменной"
+
+#: subst.c:7256
+#, fuzzy, c-format
+msgid "%s: parameter not set"
+msgstr "%s: параметр не задан или пу�той"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: параметр не задан или пу�той"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: заданное под�трокой выражение меньше нул�"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: недопу�тима� под�тановка"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: такое при�воение невозможно"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+"в будущих вер�и�х командный проце��ор оценка будет выполн�ть�� как "
+"математиче�ка� под�тановка"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "неверна� под�тановка: нет закрывающей «`» в %s"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "нет �овпадений: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "ожидает�� аргумент"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: ожидает�� целочи�ленное выражение"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "ожидает�� �имвол «)»"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "ожидает�� �имвол «)», обнаружено %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: ожидает�� бинарный оператор"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: ожидает�� унарный оператор"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "от�ут�твует �имвол «]»"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "�интак�иче�ка� ошибка: ожидает�� «;»"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "недопу�тимый номер �игнала"
+
+#: trap.c:325
+#, fuzzy, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr "eval: до�тигнут мак�имальный уровень вложенно�ти eval (%d)"
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: неверное значение в trap_list[%d]: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps: обработчик �игнала — SIG_DFL; повторна� отправка %d (%s) "
+"�амому �ебе"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: неверный �игнал %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "ошибка импорта определени� функции дл� «%s»"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "�лишком вы�окий уровень командного проце��ора (%d); �бра�ывает�� до 1"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: в текущей обла�ти от�ут�твует контек�т функции"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: переменной не может быть при�воено значение"
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr "%s: целое чи�ле при�ваивает�� ��ылке на им�"
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: в текущей обла�ти от�ут�твует контек�т функции"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s имеет пу�тую exportstr"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "недопу�тимый �имвол %d в exportstr дл� %s"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "от�ут�твует «=» в exportstr дл� %s"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr ""
+"pop_var_context: заголовок shell_variables не �вл�ет�� контек�том функции"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: от�ут�твует контек�т global_variables"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr ""
+"pop_scope: заголовок shell_variables не �вл�ет�� обла�тью временного "
+"окружени�"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: не удаёт�� открыть как Ф�ЙЛ"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: недопу�тимое значение дл� де�криптора файла тра��ировки"
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s: значение �овме�тимо�ти за пределами диапазона"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "© Free Software Foundation, Inc, 2012."
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"Лицензи� GPLv3+: GNU GPL вер�ии 3 или более поздней <http://gnu.org/licenses/"
+"gpl.html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, вер�и� %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr ""
+"Это �вободное программное обе�печение. Вы можете измен�ть и ра�про�тран�ть "
+"его."
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "�ИК�К�Я Г�Р��ТИЯ не предо�тавл�ет�� в пределах, допу�каемых законом."
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: не удаёт�� выделить %lu байт (выделено %lu байт)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: не удаёт�� выделить %lu байт"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: не удаёт�� выделить %lu байт (выделено %lu байт)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: не удаёт�� выделить %lu байт"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [им�[=значение] ... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] им� [им� ...]"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpvsPSVX] [-m ра�кладка] [-f файл] [-q им�] [-u name] [-r "
+"по�лед_клавиш] [-x по�лед_клавиш:команда_shell] [по�лед_клавиш:фнкц_readline "
+"или команда_readline]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [в�тр_команда [аргумент ...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [выражение]"
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]] [-@]] [каталог]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] команда [аргумент ...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilnrtux] [-p] [им�[=значение] ...]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilnrtux] [-p] им�[=значение] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [параметр] им�[=значение] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [аргумент ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [аргумент ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f файл] [им� ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [аргумент ...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts �трока_параметров им� [аргумент]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a им�] [команда] [аргументы ...]] [перенаправление ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr ""
+"fc [-e редактор] [-lnr] [перва�] [по�ледн��] или fc -s [шаблон=замена] "
+"[команда]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [задание]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [задание ...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p путь] [-dt] [им� ...]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [шаблон ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d �мещение] [n] или history -anrw [файл] или history -ps "
+"аргумент [аргумент...]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [задание ...] или jobs -x команда [аргументы]"
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [задание ... | pid ...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s назв_�игнала | -n номер_�игнала | -назв_�игнала] ид_проце��а | "
+"назв_задани�] ... или kill -l [назв_�игнала]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let аргумент [аргумент ...]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a ма��ив] [-d разделитель] [-i тек�т] [-n чи�ло_�имволов] [-N "
+"чи�ло_�имволов] [-p приглашение] [-t тайм-аут] [-u fd] [им� ...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o параметр] [--] [аргумент ...]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [им� ...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [им�[=значение ...] или export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [им�[=значение] ...] или readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source файл [аргументы]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". файл [аргументы]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [выражение]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ аргумент... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[аргумент] �игнал ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] им� [им� ...]"
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [ограничение]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [режим]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-n] [идентификатор ...]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [идентификатор ...]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for ИМЯ [in СЛОВ�... ;] do КОМ��ДЫ; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( выраж1; выраж2; выраж3 )); do КОМ��ДЫ; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select ИМЯ [in СЛОВ� ... ;] do КОМ��ДЫ; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] конвейер"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case СЛОВО in [Ш�БЛО� [| Ш�БЛО�]...) КОМ��ДЫ ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if КОМ��ДЫ; then КОМ��ДЫ; [ elif КОМ��ДЫ; then КОМ��ДЫ; ]... [ else "
+"КОМ��ДЫ; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while КОМ��ДЫ; do КОМ��ДЫ; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until КОМ��ДЫ; do КОМ��ДЫ; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [ИМЯ] команда [перенаправлени�]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function ИМЯ { КОМ��ДЫ ; } или ИМЯ () { КОМ��ДЫ ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ КОМ��ДЫ ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "задание [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( выражение ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ выражение ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr ""
+"переменные — имена и значени� некоторых переменных командного проце��ора"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | каталог]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [параметр ...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v переменна�] формат [аргументы]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DE] [-o параметр] [-A дей�твие] [-G "
+"глоб_шаблон] [-W �пи�ок_�лов]  [-F функци�] [-C команда] [-X фильтр_шабл] [-"
+"P префик�] [-S �уффик�] [им� ...]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o параметр] [-A дей�твие] [-G глоб_шабл] [-W "
+"�пи�ок_�лов]  [-F функци�] [-C команда] [-X фильтр_шабл] [-P префик�] [-S "
+"�уффик�] [�лово]"
+
+#: builtins.c:239
+#, fuzzy
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o параметр] [-DE] [им� ...]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-d разделитель] [-n чи�ло] [-O начало] [-s чи�ло] [-t] [-u fd] [-C "
+"callback] [-c quantum] [ма��ив]"
+
+#: builtins.c:244
+#, fuzzy
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-n чи�ло] [-O начало] [-s чи�ло] [-t] [-u fd] [-C callback] [-c "
+"quantum] [ма��ив]"
+
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Определение или отображение п�евдонимов.\n"
+"    \n"
+"    Е�ли не указать аргументы, alias выводит �пи�ок п�евдонимов\n"
+"    в виде «alias им�=значение» на �тандартный вывод.\n"
+"    \n"
+"    В противном �лучае каждому имени, дл� которого указано значение,\n"
+"    назначает�� п�евдоним. Е�ли значение в конце �одержит пробел,\n"
+"    �ледующее �лово будет провер�ть�� на замену п�евдонима при его\n"
+"    развёртывании.\n"
+"    \n"
+"    Параметры:\n"
+"      -p\tвыводит в�е определённые п�евдонимы\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    alias возвращает и�тину, е�ли дл� указанного имени был задан\n"
+"    п�евдоним."
+
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Удал�ет в�е имена из �пи�ка определённых п�евдонимов.\n"
+"    \n"
+"    Параметры:\n"
+"      -a\tудал�ет в�е п�евдонимы\n"
+"    \n"
+"    Возвращает у�пех, е�ли им� �в�зано � �уще�твующим п�евдонимом."
+
+#: builtins.c:291
+#, fuzzy
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"Определение прив�зок клавиш и переменных readline.\n"
+"    \n"
+"    Прив�зывает по�ледовательно�ть клавиш функции readline или макро�у\n"
+"    или задаёт переменную readline.  Синтак�и� аргументов без параметров "
+"аналогичен\n"
+"    �интак�и�у файла ~/.inputrc, но в�ё должно передавать�� в одном "
+"аргументе,\n"
+"    например bind '\"\\C-x\\C-r\": перечитать-init-файл'.\n"
+"    \n"
+"    Параметры:\n"
+"      -m  ра�кладка      и�пользовать указанную ра�кладку во врем� "
+"выполнени�\n"
+"                         данной команды.  Допу�тимые ра�кладки: emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command и vi-insert.\n"
+"      -l                 выве�ти названи� функций\n"
+"      -P                 выве�ти названи� функций и их прив�зки\n"
+"      -p                 выве�ти функции и их прив�зки в формате\n"
+"                         дл� повторного и�пользовани�\n"
+"      -S                 выве�ти �пи�ок по�ледовательно�тей клавиш, которые\n"
+"                   вызывают макро�ы, и их значени�\n"
+"      -s                 выве�ти �пи�ок по�ледовательно�тей клавиш, которые\n"
+"                   вызывают макро�ы, и их значени�\n"
+"                         в формате дл� повторного и�пользовани�\n"
+"      -V                 выве�ти названи� переменных и их значени�\n"
+"      -v                 выве�ти имена переменных и их значени�\n"
+"                         в формате дл� повторного и�пользовани�\n"
+"      -q  им�_функции\t выве�ти клавиши, вызывающие указанную функцию\n"
+"      -u  им�_функции    отв�зать в�е клавиши, прив�занные к указанной "
+"функции\n"
+"      -r  по�л-клавиш    удалить прив�зку дл� по�ледовательно�ти клавиш\n"
+"      -f  файл           прочитать прив�зки из файла\n"
+"      -x  по�л-клавиш:кмнд-shell выполнить команду bash, е�ли введена\n"
+"    \t\t\t\tпо�ледовательно�ть клавиш\n"
+"      -X\t\t     выве�ти по�ледовательно�ти клавиш, прив�занные � помощью -"
+"x, и �в�занные команды\n"
+"                         в формате дл� повторного и�пользовани�\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    bind возвращает 0, е�ли был указан допу�тимый параметр или не возникла "
+"ошибка."
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Прерывание цикла for, while или until.\n"
+"    \n"
+"    Прерывает цикл for, while или until.  Е�ли указано N, прерывает N "
+"вложенных\n"
+"    циклов.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает 0, е�ли N не больше или равно 1."
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Возобновление цикла for, while или until.\n"
+"    \n"
+"    Возобновл�ет �ледующую итерацию вложенного цикла for, while или until.\n"
+"    Е�ли указано N, возобновл�ет N-й вложенный цикл.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает 0, е�ли N не больше или равно 1."
+
+#: builtins.c:354
+#, fuzzy
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Выполнение в�троенных команд.\n"
+"    \n"
+"    Выполн�ет в�троенную команду bash � аргументами\n"
+"    без пои�ка команды.  Это полезно, е�ли нужно переопределить в�троенную "
+"команду\n"
+"    как функцию командного проце��ора, в �той функции нужно выполнить "
+"в�троенную команду.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает �о�то�ние выхода в�троенной команды или ложь, е�ли указанна� "
+"команда bash\n"
+"    не �вл�ет�� в�троенной."
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Возвращает контек�т вызова текущей подпрограммы.\n"
+"    \n"
+"    Е�ли выражение не указано, возвращает «$line $filename».  Е�ли выражение "
+"указано, возвращает\n"
+"    «$line $subroutine $filename». Эти дополнительные данные можно\n"
+"    и�пользовать дл� тра��ировки �тека.\n"
+"    \n"
+"    Значение выражени� означает количе�тво кадров, которое нужно вызвать\n"
+"    дл� возврата к текущему кадру. Первый кадр имеет номер 0.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает 0, е�ли командный проце��ор не выполн�ет функцию, или "
+"выражение\n"
+"    �вл�ет�� допу�тимым."
+
+#: builtins.c:387
+#, fuzzy
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"Смена рабочего каталога командного проце��ора.\n"
+"    \n"
+"    Измен�ет текущий каталог на указанный каталог.  Каталог по умолчанию "
+"хранит�� в\n"
+"    переменной $HOME командного проце��ора.\n"
+"    \n"
+"    Переменна� $CDPATH определ�ет путь пои�ка каталога, �одержащего\n"
+"    указанный каталог.  �льтернативные каталоги в $CDPATH раздел�ют�� "
+"двоеточием (:).\n"
+"    Пу�тое название каталога �оответ�твует текущему каталогу.  Е�ли каталог "
+"начинает��\n"
+"    � ко�ой черты (/), переменна� $CDPATH не и�пользует��.\n"
+"    \n"
+"    Е�ли каталог не найден и задан параметр «cdable_vars»,\n"
+"    �лово �читает�� названием переменной.  Е�ли �та переменна� �одержит "
+"значение,\n"
+"    оно и�пользует�� дл� каталога.\n"
+"    \n"
+"    Параметры:\n"
+"        -L\tпереходить по �имвольным ��ылкам: ��ылки ра�крывают�� \n"
+"    \tв каталоге по�ле обработки �кземпл�ров «..»\n"
+"        -P\tи�пользовать физиче�кую �труктуру каталогов без перехода\n"
+"    \tпо �имвольным ��ылкам: ��ылки ра�крывают�� в каталоге до\n"
+"    \tобработки «..»\n"
+"        -e\tе�ли указан параметр -P, и не удаёт�� определить текущий\n"
+"    \tрабочий каталог, команда завершает�� � ненулевым �о�то�нием\n"
+"        -@  на �и�темах, которые �то поддерживают, пред�тавл�ет файл � "
+"ра�ширенными\n"
+"            атрибутами как каталог, �одержащий атрибуты файла\n"
+"    \n"
+"    По умолчанию выполн�ет�� переход по �имвольным ��ылкам (как при указании "
+"параметра «-L»).\n"
+"    «..» обрабатывает�� путём удалени� первого компонента пути до ко�ой "
+"черты\n"
+"    или из начала каталога.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает 0, е�ли каталог был изменён, и е�ли $PWD был у�пешно "
+"у�тановлен\n"
+"    при и�пользовании параметра -P. В противном �лучае возвращает�� "
+"ненулевое �о�то�ние."
+
+#: builtins.c:425
+#, fuzzy
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"Вывод названи� текущего рабочего каталога.\n"
+"    \n"
+"    Параметры:\n"
+"      -L\tпоказать значение $PWD, е�ли переменна� указывает на\n"
+"    \tтекущий рабочий каталог\n"
+"      -P\tпоказать название физиче�кого каталога без �имвольных ��ылок\n"
+"    \n"
+"    По умолчанию pwd работает, как е�ли бы «-L» не был указан.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает 0, е�ли был указан допу�тимый параметр или можно прочитать\n"
+"    текущий каталог."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Пу�та� команда.\n"
+"    \n"
+"    Команда не выполн�ет никаких дей�твий и ни на что не вли�ет.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    В�егда возвращает у�пех."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Возвращает результат у�пешного выполнени�.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    В�егда возвращает у�пех."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Возвращает результат неудачного выполнени�.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    В�егда возвращает ошибку."
+
+#: builtins.c:471
+#, fuzzy
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Выполнение про�той команды или вывод информации о командах.\n"
+"    \n"
+"    Выполн�ет команду � аргументами без пои�ка функции командного "
+"проце��ора\n"
+"    или выводит информацию об указанных командах.  Можно и�пользовать дл� "
+"вызова команд\n"
+"    � ди�ка, когда функци� � таким именем уже �уще�твует.\n"
+"    \n"
+"    Параметры:\n"
+"      -p\tи�пользовать значение по умолчанию дл� $PATH, чтобы "
+"гарантированно\n"
+"    \tнайти в�е �тандартные команды\n"
+"      -v\tвыве�ти опи�ание команды аналогично в�троенной команде «type»\n"
+"      -V\tвыве�ти более подробное опи�ание каждой команды\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает �о�то�ние выхода КОМ��ДЫ или ошибку, е�ли КОМ��Д� не найдена."
+
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"Указание значений переменных и атрибутов.\n"
+"    \n"
+"    Объ�вление переменных и назначение им атрибутов.  Е�ли имена не "
+"указаны,\n"
+"    выводит атрибуты и значени� в�ех переменных.\n"
+"    \n"
+"    Параметры:\n"
+"      -f\tограничить дей�твие или выве�ти имена функций и их определени�\n"
+"      -F\tвыве�ти только имена функций (а также номер �троки\n"
+"    \tв и�ходном файле при отладке)\n"
+"      -g\t�оздать глобальные переменные при и�пользовании в функции "
+"командного проце��ора; в противном �лучае\n"
+"    \tигнорирует��\n"
+"      -p\tвыве�ти атрибуты и значени� каждого имени\n"
+"    \n"
+"    Параметры, задающие атрибуты:\n"
+"      -a\t�делать имена индек�ированными ма��ивами (е�ли поддерживает��)\n"
+"      -A\t�делать имена а��оциативными ма��ивами (е�ли поддерживает��)\n"
+"      -i\tназначить именам атрибут «integer»\n"
+"      -l\tпереве�ти имена в нижний реги�тр при назначении\n"
+"      -n\t�делать им� ��ылкой на переменную � именем, �оответ�твующим её "
+"значению\n"
+"      -r\tотключить запи�ь в имена\n"
+"      -t\tназначить именам атрибут «trace»\n"
+"      -l\tпереве�ти имена в верхний реги�тр при назначении\n"
+"      -x\t�к�портировать имена\n"
+"    \n"
+"    Знак «+» вме�то «-» отключает указанный атрибут.\n"
+"    \n"
+"    Переменные � атрибутом «integer» �одержат математиче�кое выражение (�м.\n"
+"    команду «let»), которое ра��читывает�� при назначении значени� "
+"переменной.\n"
+"    \n"
+"    При и�пользовании в функции «declare» делает имена локальными как при "
+"и�пользовании\n"
+"    данной команды.  Параметр «-g» отключает �то поведение.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли был указан допу�тимый параметр или не возникла\n"
+"    ошибка при�воени�."
+
+#: builtins.c:532
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"Указание значений переменных и атрибутов.\n"
+"    \n"
+"    У�тарел.  См. «help declare»."
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Определение локальных переменных.\n"
+"    \n"
+"    Создаёт локальную переменную � указанным именем и при�ваивает ей "
+"указанное значение.  Параметром может быть\n"
+"    любой параметр, принимаемый командой «declare».\n"
+"    \n"
+"    Локальные переменные можно и�пользовать только внутри функции. Они "
+"видны\n"
+"    только той функции, в которой они определены, и её дочерним функци�м.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли был указан допу�тимый параметр, не возникла\n"
+"    ошибка при�воени� переменной или командный проце��ор не выполн�ет "
+"функцию."
+
+#: builtins.c:557
+#, fuzzy
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Вывод аргументов на �тандартный вывод.\n"
+"    \n"
+"    Выводит аргументы, разделённые пробелом, добавл�� в конце �имвол новой "
+"�троки,\n"
+"    на �тандартный вывод.\n"
+"    \n"
+"    Параметры:\n"
+"      -n\tне добавл�ть �имвол новой �троки\n"
+"      -e\tвключить интерпретацию �имволов, �кранированных обратной ко�ой "
+"чертой\n"
+"      -E\t�вно отключить интерпретацию �имволов, �кранированных обратной "
+"ко�ой чертой\n"
+"    \n"
+"    echo интерпретирует �ледующие �имволы, �кранированные обратной ко�ой "
+"чертой:\n"
+"      \\a\tоповещение (звуковой �игнал)\n"
+"      \\b\tbackspace\n"
+"      \\c\tотключение дальнейшего вывода\n"
+"      \\e\t�имвол escape\n"
+"      \\E\t�имвол escape\n"
+"      \\f\tпрогон �траницы\n"
+"      \\n\tнова� �трока\n"
+"      \\r\tвозврат каретки\n"
+"      \\t\tгоризонтальна� табул�ци�\n"
+"      \\v\tвертикальна� табул�ци�\n"
+"      \\\\\tобратна� ко�а� черта\n"
+"      \\0nnn\t�имвол � ASCII-кодом NNN (во�ьмеричным)  NNN может быть "
+"длиной\n"
+"    \tот 0 до 3 во�ьмеричных цифр\n"
+"      \\xHH\tво�ьмиразр�дный �имвол, значение которого — HH "
+"(ше�тнадцатеричное)  HH\n"
+"    \tможет быть одной или двум� ше�тнадцатеричными цифрами\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли не произошла ошибка запи�и."
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Вывод аргументов на �тандартный вывод.\n"
+"    \n"
+"    Выводит аргументы на �тандартный вывод, добавл�� в конце �имвол новой "
+"�троки.\n"
+"    \n"
+"    Параметры:\n"
+"      -n\tне добавл�ть �имвол новой �троки\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли не произошла ошибка запи�и."
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"Включение и отключение в�троенных команд командного проце��ора.\n"
+"    \n"
+"    Включает и отключает команды, в�троенные в командный проце��ор.  "
+"Отключение позволит\n"
+"    выполнить команду � ди�ка, название которой �овпадает � названием "
+"в�троенной команды,\n"
+"    без указани� полного пути к ней.\n"
+"    \n"
+"    Параметры:\n"
+"      -a\tпоказать �пи�ок в�троенных команд и их �о�то�ние\n"
+"      -n\tотключить в�е указанные имена или выве�ти �пи�ок отключённых "
+"команд\n"
+"      -p\tпоказать �пи�ок в�троенных команд\n"
+"      -s\tпоказать только названи� в�троенных команд «special» Posix\n"
+"    \n"
+"    Параметры, управл�ющие динамиче�кой загрузкой:\n"
+"      -f\tзагрузить в�троенную указанную команду из указанного файла\n"
+"      -d\tудалить в�троенную функцию, загруженную � параметром -f\n"
+"    \n"
+"    Без указани� параметров включают�� в�е указанные команды.\n"
+"    \n"
+"    Чтобы и�пользовать команду «test», найденную в переменной $PATH,\n"
+"    а не в�троенную в командный проце��ор, введите «enable -n test».\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли указанное им� не �вл�ет�� в�троенной командой или "
+"не произошла ошибка."
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Выполнение аргументов как команды командного проце��ора.\n"
+"    \n"
+"    Объедин�ет аргументы в одну �троку, результат передаёт��\n"
+"    в командный проце��ор � выполнением полученных команд.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает �о�то�ние выхода команды или у�пех, е�ли команда пу�та�."
+
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"�нализ аргументов параметра.\n"
+"    \n"
+"    getopts и�пользует�� процедурами командного проце��ора дл� анализа\n"
+"    позиционных параметров.\n"
+"    \n"
+"    «�трока_параметров» �одержит буквы ра�познаваемых параметров. Е�ли "
+"по�ле\n"
+"    буквы идёт двоеточие, �читает��, что у параметра е�ть аргумент,\n"
+"    который должен быть отделён пробелом.\n"
+"    \n"
+"    При каждом �воём вызове getopts поме�тит �ледующий параметр в "
+"переменную\n"
+"    $им�, проинициализировав �то им�, е�ли оно не �уще�твует,\n"
+"    и проиндек�ирует �ледующий обрабатываемый аргумент в переменной\n"
+"    $OPTIND.  Переменна� $OPTIND инициализирует�� при каждом вызове\n"
+"    командного проце��ора или �крипта.  Когда дл� параметра нужен аргумент,\n"
+"    getopts помещает �тот аргумент в переменную $OPTARG.\n"
+"    \n"
+"    getopts �ообщает об ошибках двум� �по�обами.  Е�ли первый �имвол\n"
+"    в «�троке_параметров» �вл�ет�� двоеточием, getopts включает режим "
+"молчани�.  В �том\n"
+"    режиме �ообщени� об ошибках не вывод�т��.  Е�ли указан неверный\n"
+"    параметр, getopts помещает �имвол параметра в переменную $OPTARG.  Е�ли\n"
+"    об�зательный аргумент не найден, getopts помещает «:» в «им�»\n"
+"    и задаёт дл� $OPTARG �имвол найденного параметра.  Е�ли getopts не в "
+"режиме\n"
+"    молчани�, и был указан неверный параметр, getopts помещает «?»\n"
+"    в ��ЗВ��ИЕ и удал�ет переменную OPTARG.  Е�ли об�зательный аргумент не "
+"найден, в ��ЗВ��ИЕ\n"
+"    помещает�� «?», переменна� OPTARG удал�ет�� и выводит�� диагно�тиче�кое\n"
+"    �ообщение.\n"
+"    \n"
+"    Е�ли переменна� OPTERR имеет значение 0, getopts отключает\n"
+"    вывод �ообщений об ошибках, даже е�ли первый �имвол переменной\n"
+"    OPTSTRING не �вл�ет�� двоеточием.  По умолчанию переменна� OPTERR имеет "
+"значение 1.\n"
+"    \n"
+"    Getopts обычно анализирует позиционные параметры ($0–$9), но е�ли\n"
+"    задано больше аргументов, анализируют�� по�ледние.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли найден параметр. Возвращает ошибку, е�ли "
+"до�тигнут\n"
+"    конец параметров или возникла ошибка."
+
+#: builtins.c:694
+#, fuzzy
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"Замена командного проце��ора указанной командой.\n"
+"    \n"
+"    Выполн�ет команду, замен�� текущий командный проце��ор указанной "
+"программой.\n"
+"    Указанные аргументы �танов�т�� аргументами дл� команды.  Е�ли команда не "
+"указана,\n"
+"    в�е перенаправлени� будет выполн�ть�� в текущем командном проце��оре.\n"
+"    \n"
+"    Параметры:\n"
+"      -a им�\t\tпередать им� как нулевой аргумент в команду\n"
+"      -c\t\tвыполнить команду � пу�тым окружением\n"
+"      -l\t\tпоме�тить тире в нулевой аргумент дл� команды\n"
+"    \n"
+"    Е�ли команду не удаёт�� выполнить, неинтерактивный командный проце��ор\n"
+"    закроет�� (е�ли только на задан «execfail»).\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли команда не была найдена или не возникла ошибка "
+"перенаправлени�."
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Выход из командного проце��ора.\n"
+"    \n"
+"    Закрывает командный проце��ор � �о�то�нием N. Е�ли N не указан,\n"
+"    �о�то�нием выхода будет �о�то�ние по�ледней выполненной команды."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Выход из командного проце��ора login.\n"
+"    \n"
+"    Закрывает командный проце��ор login � �о�то�нием выхода N. Возвращает\n"
+"    ошибку, е�ли выполн�ет�� не в командном проце��оре login."
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"Отображение или выполнение команд из журнала.\n"
+"    \n"
+"    fc выводит �пи�ок команд из журнала или позвол�ет изменить и повторно "
+"выполнить их.\n"
+"    �ргументы «перва�» и «по�ледн��» могут быть чи�лами, определ�ющими "
+"диапазон.\n"
+"    �ргумент «перва�» также может быть �трокой, котора� означает\n"
+"    по�леднюю команду, начинающую�� � �той �троки.\n"
+"    \n"
+"    Параметры:\n"
+"      -e редактор\tуказать редактор  По умолчанию и�пользует�� $FCEDIT, \n"
+"    \t\tзатем �ледует $EDITOR, а затем — vi\n"
+"      -l \tпоказать �троки вме�то редактировани�\n"
+"      -n\tне показывать номера �трок в �пи�ке\n"
+"      -r\tинвертировать пор�док �трок (новые в начале)\n"
+"    \n"
+"    При запу�ке в формате «fc -s [шаблон=замена ...] [команда]» команда\n"
+"    выполн�ет�� повторно по�ле замены �тара�=нова�.\n"
+"    \n"
+"    Полезный п�евдоним дл� команды — r='fc -s'. Так е�ли вве�ти «r cc»,\n"
+"    будет выполнена по�ледн�� команда, начинающа��� � «cc», а е�ли вве�ти "
+"«r»,\n"
+"    будет выполнена по�ледн�� команда.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех или �о�то�ние выполненной команды. В �лучае ошибки "
+"возвращает ненулевое �о�то�ние."
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Перевод задани� в интерактивный режим.\n"
+"    \n"
+"    Переводит указанное задание в интерактивный режим, дела�\n"
+"    его текущим заданием.  Е�ли задание не указано, и�пользует��\n"
+"    текущее задание.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает �о�то�ние команды, переведённой в интерактивный режим, или "
+"ошибку, е�ли возникла ошибка."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Перевод заданий в фоновый режим.\n"
+"    \n"
+"    Переводит указанные задани� в фоновый режим, как е�ли бы\n"
+"    они были запущены � «&».  Е�ли задание не указано, и�пользуют�� данные\n"
+"    текущего задани�.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли не включено управление задани�ми или не произошла "
+"ошибка."
+
+#: builtins.c:793
+#, fuzzy
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"Запоминание или отображение ме�тоположений программ.\n"
+"    \n"
+"    Определ�ет и запоминает полный путь дл� в�ех указанных команд.  Е�ли\n"
+"    аргументы не указаны, выводит информацию о запомненных командах.\n"
+"    \n"
+"    Параметры:\n"
+"      -d\t\tзабыть запомненные ме�тоположени� в�ех указанных команд\n"
+"      -l\t\tотобразить данные в формате дл� повторного и�пользовани�\n"
+"      -p путь\t\tи�пользовать указанный путь как полный путь к команде\n"
+"      -r\t\tзабыть в�е запомненные ме�тоположени�\n"
+"      -t\t\tвыве�ти запомненные ме�тоположение в�ех команд,\n"
+"    \t\tуказав перед каждым из них �оответ�твующее им� команды,\n"
+"    \t\tе�ли указано не�колько команд.\n"
+"    �ргументы:\n"
+"      ИМЯ\t\tв�е команды ищут�� в $PATH и добавл�ют�� в �пи�ок\n"
+"    \t\tзапомненных команд.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли команда была найдена или был указан допу�тимый "
+"параметр."
+
+#: builtins.c:818
+#, fuzzy
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Вывод информации о в�троенных командах.\n"
+"    \n"
+"    Показывает краткую �правку о в�троенных командах.  Е�ли указан\n"
+"    шаблон, выводит подробную �правку по в�ем командам, удовлетвор�ющим "
+"шаблону.\n"
+"    В противном �лучае выводит�� �пи�ок разделов �правки.\n"
+"    \n"
+"    Параметры:\n"
+"      -d\tпоказать краткое опи�ание каждого раздела\n"
+"      -m\tпоказать �правку по и�пользованию в формате man\n"
+"      -s\tпоказать только краткую �правку по и�пользованию дл� каждого\n"
+"    \tраздела, �оответ�твующего шаблону\n"
+"    \n"
+"    �ргументы:\n"
+"      Ш�БЛО�\tшаблон, определ�ющий раздел �правки\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли был найден шаблон или был указан допу�тимый "
+"параметр."
+
+#: builtins.c:842
+#, fuzzy
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Отображение или изменение журнала команд.\n"
+"    \n"
+"    Выводит журнал команд � номерами �трок и звёздочками (*) перед в�еми\n"
+"    изменёнными запи��ми.  С аргументом N показывают�� только по�ледние N "
+"запи�ей.\n"
+"    \n"
+"    Параметры:\n"
+"      -c\tочи�тить журнал, удалив из него в�е запи�и\n"
+"      -d �мещение\tудалить запи�ь журнала по указанному �мещению\n"
+"    \n"
+"      -a\tдобавить журнал текущего �еан�а в файл журнала\n"
+"      -n\tпрочитать в�е запи�и, которые ещё не были прочитаны из файла "
+"журнала\n"
+"      -r\tпрочитать файл журнала и добавить его �одержимое\n"
+"    \tв журнал\n"
+"      -w\tзапи�ать текущий журнал в файл журнала\n"
+"    \tи добавить запи�и в журнал\n"
+"    \n"
+"      -p\tдобавить в журнал указанные аргументы и показать результат,\n"
+"    \tне �охран�� его в журнал\n"
+"      -s\tдобавить аргументы в журнал как одну запи�ь\n"
+"    \n"
+"    Е�ли указан файл, он и�пользует�� как файл журнала.  В противном �лучае\n"
+"    е�ли $HISTFILE �одержит значение, и�пользует�� �тот файл, иначе — файл "
+"~/.bash_history.\n"
+"    \n"
+"    Е�ли переменна� $HISTTIMEFORMAT задана и не �вл�ет�� пу�той, её "
+"значение\n"
+"    и�пользует�� как �трока форматировани� дл� strftime(3) дл� вывода метки\n"
+"    времени дл� каждой показанной запи�и журнала.  В противном �лучае метки "
+"времени не будут показаны.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли был указан допу�тимый параметр или не возникла "
+"ошибка."
+
+#: builtins.c:879
+#, fuzzy
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"Отображение �о�то�ни� заданий.\n"
+"    \n"
+"    Выводит �пи�ок активных заданий.  Е�ли указан номер задани�, выводит�� "
+"только �то задание.\n"
+"    Е�ли не указать параметры, будет показано �о�то�ние в�ех активных "
+"заданий.\n"
+"    \n"
+"    Параметры:\n"
+"      -l\tпоказать идентификаторы проце��ов в дополнение к обычной "
+"информации\n"
+"      -n\tпоказать только те проце��ы, у которых изменило�ь �о�то�ние\n"
+"    \t� момента по�ле по�леднего уведомлени�\n"
+"      -p\tпоказать только идентификаторы проце��ов\n"
+"      -r\tпоказать только запущенные задани�\n"
+"      -s\tпоказать только о�тановленные задани�\n"
+"    \n"
+"    Е�ли указан параметр -x, команда выполн�ет�� по�ле замены в�ех номеров\n"
+"    заданий, указанных в аргументах, на идентификатор проце��а\n"
+"    лидера группы проце��ов задани�.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли был указан допу�тимый параметр или не возникла "
+"ошибка.\n"
+"    Е�ли указан параметр -x, возвращает �о�то�ние выхода команды."
+
+#: builtins.c:906
+#, fuzzy
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"Удаление заданий в текущем командном проце��оре.\n"
+"    \n"
+"    Удал�ет в�е указанные задани� из �пи�ка активных заданий.  Е�ли\n"
+"    задание не указано, удал�ет�� текущее задание.\n"
+"    \n"
+"    Параметры:\n"
+"      -a\tудалить в�е задани�, е�ли не указано конкретное задание\n"
+"      -h\tпометить в�е задани�, чтобы им не отправл�л�� �игнал SIGHUP,\n"
+"    \tе�ли командный проце��ор получает �игнал SIGHUP\n"
+"      -r\tудалить только активные задани�\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли был указан допу�тимый параметр или задание."
+
+#: builtins.c:925
+#, fuzzy
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Отправка �игнала заданию.\n"
+"    \n"
+"    Отправл�ет проце��ам или задани�м �игнал � указанным названием\n"
+"    или номером. Е�ли номер или название �игнала\n"
+"    не указаны, отправл�ет�� �игнал SIGTERM.\n"
+"    \n"
+"    Параметры:\n"
+"      -s �игнал\tназвание �игнала\n"
+"      -n �игнал\tномер �игнала\n"
+"      -l\t\tпоказывает названи� �игналов; е�ли по�ле аргументов указано «-"
+"l»,\n"
+"    \tони �читают�� номерами �игналов, дл� которых необходимо показать "
+"названи�\n"
+"    \n"
+"    kill — �то в�троенна� команда, предназначенна� дл� двух задач: "
+"и�пользовать\n"
+"    номера заданий вме�то номеров проце��ов и убивать проце��ы\n"
+"    при до�тижении предельного чи�ла проце��ов.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли был указан допу�тимый параметр или не возникла "
+"ошибка."
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"Ра�чёт математиче�ких выражений.\n"
+"    \n"
+"    Выполн�ет ра�чёт в�ех аргументов в математиче�ком выражении.  Ра�чёт "
+"выполн�ет��\n"
+"    дл� целых чи�ел фик�ированной ширины � без проверки на переполнение.\n"
+"    Однако деление на 0 перехватывает�� и выдаёт�� ошибка.  Указанные ниже "
+"операторы объединены\n"
+"    в группы � одинаковым приоритетом.  Группы перечи�лены\n"
+"    в пор�дке уменьшени� приоритета.\n"
+"    \n"
+"    \tid++, id--\tпо�ледующее увеличение и уменьшение переменной\n"
+"    \t++id, --id\tпредварительное увеличение и уменьшение переменной\n"
+"    \t-, +\t\tунарный мину� и плю�\n"
+"    \t!, ~\t\tлогиче�кое и побитовое отрицание\n"
+"    \t**\t\tвозведение в �тепень\n"
+"    \t*, /, %\t\tумножение, деление, о�таток\n"
+"    \t+, -\t\t�ложение, вычитание\n"
+"    \t<<, >>\t\tбитовые �двиги влево или вправо\n"
+"    \t<=, >=, <, >\t�равнение\n"
+"    \t==, !=\t\tравен�тво, неравен�тво\n"
+"    \t&\t\tпобитовое И\n"
+"    \t^\t\tпобитовое и�ключающее ИЛИ\n"
+"    \t|\t\tпобитовое ИЛИ\n"
+"    \t&&\t\tлогиче�кое И\n"
+"    \t||\t\tлогиче�кие ИЛИ\n"
+"    \tвыражение ? выражение : выражение\n"
+"    \t\t\tу�ловный оператор\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tпри�воение\n"
+"    \n"
+"    в каче�тве операндов можно и�пользовать переменные командного "
+"проце��ора.  �азвание переменной\n"
+"    замен�ет�� её значением (приводит�� к целому чи�лу фик�ированной "
+"ширины)\n"
+"    в выражении.  У переменной не должен быть включён атрибут integer,\n"
+"    чтобы её можно было и�пользовать в выражении.\n"
+"    \n"
+"    Операторы вычи�л�ют�� в пор�дке �таршин�тва.  Вложенные выражени� в\n"
+"    �кобках вычи�л�ют�� первыми и могут переопределить указанные\n"
+"    выше правила �таршин�тва.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Е�ли по�ледний �РГУМЕ�Т имеет значение 0, let возвращает 1. В противном "
+"�лучае let возвращает 0."
+
+#: builtins.c:994
+#, fuzzy
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"Чтение �троки �о �тандартного ввода и разделение её на пол�.\n"
+"    \n"
+"    Читает одну �троку �о �тандартного ввода или из файлового де�криптора,\n"
+"    е�ли указан параметр -u.  Строка раздел�ет�� на пол� по �ловам.\n"
+"    Первое �лово при�ваивает�� первому указанному имени, второе �лово — "
+"второму\n"
+"    имени и так далее.\n"
+"    О�тавшие�� �лова при�ваивают�� по�леднему указанному имени.  В каче�тве "
+"разделителей �лов и�пользуют�� только �имволы\n"
+"    из переменной $IFS.\n"
+"    \n"
+"    Е�ли имена не указаны, прочитанна� �трока �охран�ет�� в переменной "
+"$REPLY.\n"
+"    \n"
+"    Параметры:\n"
+"      -a ма��ив\tпо�ледовательно при�воить прочитанные �лова указател�м\n"
+"    \t\tма��ива, начина� � нул�\n"
+"      -d разделитель\tпродолжить до первого разделител�,\n"
+"    \t\tа не до �имвола новой �троки\n"
+"      -e\t\t� помощью readline получить �троку в интерактивном командном "
+"проце��оре\n"
+"      -i тек�т\t\tи�пользовать тек�т в каче�тве и�ходного дл� readline\n"
+"      -n чи�ло_знаков\tвыполнить возврат по�ле прочтени� чи�ла знаков, а не "
+"ждать\n"
+"    \t\t�имвола новой �троки; учитывать разделитель, е�ли до него было "
+"прочитано\n"
+"    \t\tменьше указанного чи�ла знаков\n"
+"      -N чи�ло_знаков\tвыполнить возврат только по�ле прочтени� указанного "
+"чи�ла знаков,\n"
+"    \t\tе�ли только не был получен конец �троки или не и�текло врем� "
+"ожидани�, игнориру� в�е разделители\n"
+"      -p приглашение\tпоказать приглашение без �имвола новой �троки в конце\n"
+"    \t\tперед тем как читать\n"
+"      -r\t\tне выполн�ть �кранирование �имволами ко�ой черты\n"
+"      -s\t\tне показывать данные, полученные из терминала\n"
+"      -t тайм-аут\tпрекратить ожидание и выве�ти ошибку, е�ли полна� "
+"входна�\n"
+"    \t\t�трока не была прочитана за указанное чи�ло �екунд  В переменной "
+"$TMOUT хранит��\n"
+"    \t\tзначение тайм-аута по умолчанию.  Врем� ожидани�\n"
+"    \t\tможет быть дробным чи�лом.  Е�ли тайм-аут равен 0, read немедленно "
+"выполн�ет возврат,\n"
+"    \t\tне пыта��ь прочитать никакие данные. У�пех возвращает��,\n"
+"    \t\tтолько е�ли входные данные до�тупны по указанному файловому "
+"де�криптору.   \n"
+"    \t\tСо�то�ние выхода больше 128, е�ли врем� ожидани� было превышено.\n"
+"      -u fd\t\tчитать из файлового де�криптора, а не �о �тандартного входа\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Со�то�ние выхода будет нулевым, е�ли не был в�тречен конец файла, не "
+"и�текло врем� ожидани�\n"
+"    (в �том �лучае �о�то�ние выхода будет больше 128), не возникла ошибка "
+"при�воени� переменной\n"
+"    или не был указан недопу�тимый файловый де�криптор как аргумент дл� -u."
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"Возврат из функции командного проце��ора.\n"
+"    \n"
+"    Выполн�ет выход из функции или и�ходного �крипта �о значением возврата,\n"
+"    указанным как N. Е�ли N не указан, и�пользует�� �о�то�ние возврата\n"
+"    по�ледней команды, выполненной в функции или �крипте.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает N или ошибку, е�ли командный проце��ор не выполн�ет функцию "
+"или �крипт."
+
+#: builtins.c:1054
+#, fuzzy
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"При�воение или удаление значений параметров командного проце��ора и "
+"позиционных параметров.\n"
+"    \n"
+"    Измен�ет значение атрибутов командного проце��ора и позиционных "
+"параметров или\n"
+"    выводит названи� и значени� переменных командного проце��ора.\n"
+"    \n"
+"    Параметры:\n"
+"      -a  пометить переменные, которые были изменены или �озданы дл� "
+"�к�порта\n"
+"      -b  немедленно уведомить о завершении задани�\n"
+"      -e  немедленно выйти, е�ли команда выполн�ет выход � ненулевым "
+"�о�то�нием\n"
+"      -f  отключить генерацию имён файлов (под�тановка)\n"
+"      -h  запомнить ра�положение команд, как они выгл�дели ранее\n"
+"      -k  поме�тить в окружение дл� команды в�е аргументы при�воени�,\n"
+"          а не только те, что были указаны перед командой\n"
+"      -m  включено управление задани�ми\n"
+"      -n  прочитать команды, но не выполн�ть их\n"
+"      -o название-параметра\n"
+"          Задаёт переменную, �оответ�твующую названию параметра:\n"
+"              allexport    �квивалент -a\n"
+"              braceexpand  �квивалент -B\n"
+"              emacs        и�пользовать �тиль emacs дл� редактировани� "
+"�трок\n"
+"              errexit      �квивалент -e\n"
+"              errtrace     �квивалент -E\n"
+"              functrace    �квивалент -T\n"
+"              hashall      �квивалент -h\n"
+"              histexpand   �квивалент -H\n"
+"              history      включить журнал команд\n"
+"              ignoreeof    не закрывать командный проце��ор по�ле получени� "
+"конца файла\n"
+"              interactive-comments\n"
+"                           разрешить показ комментариев в интерактивных "
+"командах\n"
+"              keyword      �квивалент -k\n"
+"              monitor      �квивалент -m\n"
+"              noclobber    �квивалент -C\n"
+"              noexec       �квивалент -n\n"
+"              noglob       �квивалент -f\n"
+"              nolog        допу�кает��, но игнорирует��\n"
+"              notify       �квивалент -b\n"
+"              nounset      �квивалент -u\n"
+"              onecmd       �квивалент -t\n"
+"              physical     �квивалент -P\n"
+"              pipefail     возвращаемое значение конвейера �вл�ет�� "
+"�о�то�нием\n"
+"                           по�ледней команды, завершившей�� � ненулевым "
+"�о�то�нием,\n"
+"                           или нулём, е�ли не было команды, завершившей�� � "
+"ненулевым �о�то�нием\n"
+"              posix        изменить поведение bash там, где операции\n"
+"                           по умолчанию отличают�� от �тандарта Posix, "
+"чтобы\n"
+"                           �оответ�твовать �тому �тандарту\n"
+"              privileged   �квивалент -p\n"
+"              verbose      �квивалент -v\n"
+"              vi           и�пользовать �тиль vi дл� редактировани� �трок\n"
+"              xtrace       �квивалент -x\n"
+"      -p  Включён, когда реальный и �ффективный идентификаторы пользовател� "
+"не �овпадают.\n"
+"          Отключает обработку файла $ENV и импорт функций командного\n"
+"          проце��ора.  Е�ли отключить �тот параметр, �ффективные UID и GID\n"
+"          будут назначены реальным UID и GID.\n"
+"      -t  Выйти по�ле прочтени� и выполнени� одной команды.\n"
+"      -u  Считать незаданные переменные ошибкой при замене.\n"
+"      -v  Выводить входные �троки на �кран по�ле их чтени�.\n"
+"      -x  Выводить команды и их аргументы во врем� их выполнени�.\n"
+"      -B  Командный проце��ор развернёт �кобки.\n"
+"      -C  Е�ли задано, запретить перезапи�ь �уще�твующих обычных файлов\n"
+"          в�лед�твие перенаправлени� вывода.\n"
+"      -E  Е�ли задано, ловушка ERR на�ледует�� функци�ми командного "
+"проце��ора.\n"
+"      -H  Включить замену журнала � и�пользованием !.  По умолчанию �тот "
+"флаг\n"
+"          у�тановлен, е�ли командный проце��ор интерактивный.\n"
+"      -P  Е�ли задано, не разрешать �имвольные ��ылки при выполнении "
+"команд,\n"
+"          таких как cd, которые измен�ют текущий каталог.\n"
+"      -T  Е�ли задано, ловушка DEBUG на�ледует�� функци�ми командного "
+"проце��ора.\n"
+"      --  �азначить в�е о�тавшие�� аргументы позиционным параметрам.\n"
+"          Е�ли аргументов не о�тало�ь, позиционные параметры\n"
+"          удал�ют��.\n"
+"      -   �азначить в�е о�тавшие�� аргументы позиционным параметрам.\n"
+"          Параметры -x и -v выключены.\n"
+"    \n"
+"    Е�ли вме�то - указать +, флаги будут выключены.   \n"
+"    Флаги также можно и�пользовать до вызова командного проце��ора.  "
+"Текущий\n"
+"    набор флагов можно про�мотреть в $-.  О�тавшие�� n аргументов �вл�ют�� "
+"позиционными\n"
+"    параметрами и назначают�� в пор�дке $1, $2, .. $n.  Е�ли\n"
+"    аргументы не указаны, вывод�т�� в�е переменные командного проце��ора.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли был указан допу�тимый параметр."
+
+#: builtins.c:1139
+#, fuzzy
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"Удаление значений и атрибутов переменных и функций командного проце��ора.\n"
+"    \n"
+"    Дл� каждого названи� удал�ет �оответ�твующую переменную или функцию.\n"
+"    \n"
+"    Параметры:\n"
+"      -f\t�читать каждое указанное им� функцией командного проце��ора\n"
+"      -v\t�читать каждое указанное им� переменной командного проце��ора\n"
+"      -n\t�читать каждое указанное им� ��ылкой на название и удалить �аму "
+"переменную,\n"
+"    \tа не переменную, на которую указывает ��ылка\n"
+"    \n"
+"    Е�ли параметры не указаны, unset �начала пытает�� удалить переменную. "
+"Е�ли �то не удаёт��,\n"
+"    пытает�� удалить функцию.\n"
+"    \n"
+"    �екоторые переменные нельз� удалить. См. также «readonly».\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли был указан допу�тимый параметр или указанное им� "
+"до�тупно дл� запи�и."
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"У�тановка атрибута �к�порта дл� переменных командного проце��ора.\n"
+"    \n"
+"    Помечает в�е имена дл� автоматиче�кого �к�порта в �реду дл�\n"
+"    по�ледующих выполн�емых команд.  Е�ли указано значение, оно "
+"при�ваивает�� перед �к�портом.\n"
+"    \n"
+"    Параметры:\n"
+"      -f\tи�пользовать функции командного проце��ора\n"
+"      -n\tудалить �вой�тво �к�порта изо в�ех имён\n"
+"      -p\tвыве�ти �пи�ок в�ех �к�портированных переменных и функций\n"
+"    \n"
+"    �ргумент «--» отключает дальнейшую обработку параметров.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли был указан допу�тимый параметр или им�."
+
+#: builtins.c:1180
+#, fuzzy
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Запрет изменени� переменных командного проце��ора.\n"
+"    \n"
+"    Делает каждое им� до�тупным только чтени�. Значени� �тих имён нельз�\n"
+"    будет изменить в будущем.  Е�ли указано значение, при�ваивает �то "
+"значение\n"
+"    перед тем, как �делать его до�тупным только дл� чтени�.\n"
+"    \n"
+"    Параметры:\n"
+"      -a\t��ылать�� на переменные индек�ированного ма��ива\n"
+"      -A\t��ылать�� на переменные а��оциативного ма��ива\n"
+"      -f\tи�пользовать функции командного проце��ора\n"
+"      -p\tвыве�ти �пи�ок в�ех переменных или функций, до�тупных только дл� "
+"чтени�,\n"
+"            в зави�имо�ти от того, указан ли параметр -f\n"
+"    \n"
+"    �ргумент «--» отключает дальнейшую обработку параметров.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли был указан допу�тимый параметр или им�."
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"Сдвиг позиционных параметров.\n"
+"    \n"
+"    Переименовывает позиционные параметры $N+1,$N+2,.. в $1,$2,..\n"
+"    Е�ли N не указан, �читает��, что указано 1.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли N положительный или меньше $#."
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Выполнение команд из файла в текущем командном проце��оре.\n"
+"    \n"
+"    Читает и выполн�ет команды из указанного файла в текущем командном "
+"проце��оре.   \n"
+"    Файла ищет�� в каталогах, указанных в переменной $PATH.\n"
+"    Е�ли указаны аргументы, они �танов�т�� позиционными параметрами\n"
+"    при выполнении файла.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает �о�то�ние по�ледней выполненной команды из файла. Возвращает "
+"ошибку,\n"
+"    е�ли файл не удаёт�� прочитать."
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Прио�тановка работы командного проце��ора.\n"
+"    \n"
+"    Прио�танавливает работу текущего командного проце��ора до получени� "
+"�игнала SIGCONT.\n"
+"    Работу командных проце��оров login можно прио�тановить только в "
+"принудительном режиме.\n"
+"    \n"
+"    Параметры:\n"
+"      -f\tпринудительно прио�тановить работу, даже е�ли командный "
+"проце��ор — login\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли не включено управление задани�ми или не произошла "
+"ошибка."
+
+#: builtins.c:1261
+#, fuzzy
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"Ра�чёт у�ловного выражени�.\n"
+"    \n"
+"    Возвращает �о�то�ние 0 (и�тина) или 1 (ложь) по�ле\n"
+"    ра�чёта выражени�.  Выражени� могут быть унарными или бинарными.  "
+"Унарные\n"
+"    выражени� ча�то и�пользуют�� дл� определени� �о�то�ни� файла.  Также\n"
+"    до�тупны �токовые операторы и операторы �равнени� чи�ел.\n"
+"    \n"
+"    Поведение команды test зави�ит от количе�тва аргументов.  Полное\n"
+"    опи�ание �м. в �транице руковод�тва bash.\n"
+"    \n"
+"    Операторы работы � файлами:\n"
+"    \n"
+"      -a Ф�ЙЛ        И�тина, е�ли файл �уще�твует.\n"
+"      -b Ф�ЙЛ        И�тина, е�ли файл пред�тавл�ет блочное у�трой�тво.\n"
+"      -c Ф�ЙЛ        И�тина, е�ли файл пред�тавл�ет �имвольное у�трой�тво.\n"
+"      -d Ф�ЙЛ        И�тина, е�ли файл �вл�ет�� каталогом.\n"
+"      -e Ф�ЙЛ        И�тина, е�ли файл �уще�твует.\n"
+"      -f Ф�ЙЛ        И�тина, е�ли файл �уще�твует и �вл�ет�� обычным "
+"файлом.\n"
+"      -g Ф�ЙЛ        И�тина, е�ли дл� файла у�тановлен бит SGID.\n"
+"      -h Ф�ЙЛ        И�тина, е�ли файл �вл�ет�� �имвольной ��ылкой.\n"
+"      -L Ф�ЙЛ        И�тина, е�ли файл �вл�ет�� �имвольной ��ылкой.\n"
+"      -k Ф�ЙЛ        И�тина, е�ли дл� файла у�тановлен sticky-бит.\n"
+"      -p Ф�ЙЛ        И�тина, е�ли файл �вл�ет�� именованным конвейером.\n"
+"      -r Ф�ЙЛ        И�тина, е�ли вы можете прочитать файл.\n"
+"      -s Ф�ЙЛ        И�тина, е�ли файл �уще�твует и не �вл�ет�� пу�тым.\n"
+"      -S Ф�ЙЛ        И�тина, е�ли файл �вл�ет�� �окетом.\n"
+"      -t ФД          И�тина, е�ли файловый де�криптор ФД открыт в "
+"терминале.\n"
+"      -u Ф�ЙЛ        И�тина, е�ли дл� файла у�тановлен бит SUID.\n"
+"      -w Ф�ЙЛ        И�тина, е�ли вы можете выполнить запи�ь в файл.\n"
+"      -x Ф�ЙЛ        И�тина, е�ли вы можете выполнить файл.\n"
+"      -O Ф�ЙЛ        И�тина, е�ли вы �вл�ете�ь �ффективным владельцем "
+"файла.\n"
+"      -G Ф�ЙЛ        И�тина, е�ли ваша группа �вл�ет�� �ффективным "
+"владельцем файла.\n"
+"      -N Ф�ЙЛ        И�тина, е�ли файл был изменён по�ле по�леднего чтени�.\n"
+"    \n"
+"      Ф�ЙЛ1 -nt Ф�ЙЛ2  И�тина, е�ли файл1 новее файла2 (�огла�но\n"
+"                       дате изменени�).\n"
+"    \n"
+"      Ф�ЙЛ1 -ot Ф�ЙЛ2  И�тина, е�ли файл1 �тарее файла2.\n"
+"    \n"
+"      Ф�ЙЛ1 -ef Ф�ЙЛ2  И�тина, е�ли файл1 �вл�ет�� жё�ткой ��ылкой на "
+"файл2.\n"
+"    \n"
+"    Строковые операторы:\n"
+"    \n"
+"      -z СТРОК�      И�тина, е�ли �трока �вл�ет�� пу�той.\n"
+"    \n"
+"      -n СТРОК�\n"
+"         СТРОК�      И�тина, е�ли �трока не �вл�ет�� пу�той.\n"
+"    \n"
+"      СТРОК�1 = СТРОК�2\n"
+"                     И�тина, е�ли �троки �овпадают.\n"
+"      СТРОК�1 != СТРОК�2\n"
+"                     И�тина, е�ли �троки не �овпадают.\n"
+"      СТРОК�1 < СТРОК�2\n"
+"                     И�тина, е�ли СТРОК�1 �ортирует�� до СТРОКИ2 "
+"лек�икографиче�ки.\n"
+"      СТРОК�1 > СТРОК�2\n"
+"                     И�тина, е�ли СТРОК�1 �ортирует�� по�ле СТРОКИ2 "
+"лек�икографиче�ки.\n"
+"    \n"
+"    О�тальные операторы:\n"
+"    \n"
+"      -o П�Р�МЕТР    И�тина, е�ли параметр командного проце��ора включён.\n"
+"      -v ПЕР\t И�тина, е�ли переменна� командного проце��ора задана\n"
+"      -R ПЕР\t И�тина, е�ли переменна� командного проце��ора задана и "
+"�вл�ет�� именованной ��ылкой.\n"
+"      ! ВЫР�Ж        И�тина, е�ли выражение возвращает ложь.\n"
+"      ВЫР�Ж1 -a ВЫР�Ж2 И�тина, е�ли оба выражени� возвращают и�тину.\n"
+"      ВЫР�Ж1 -o ВЫР�Ж2 И�тина, е�ли хот� бы одно из выражений возвращает "
+"и�тину.\n"
+"    \n"
+"      арг1 ОП арг2   Математиче�кие проверки.  ОП может быть одним из "
+"�ледующих: -eq, -ne,\n"
+"                     -lt, -le, -gt или -ge.\n"
+"    \n"
+"    Математиче�кие бинарные операторы возвращают и�тину, е�ли �РГУМЕ�Т1 "
+"равен, не равен,\n"
+"    меньше, меньше или равен либо больше или равен\n"
+"    �РГУМЕ�ТУ2.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли выражение и�тинно, или ошибку, е�ли выражение "
+"ложно\n"
+"    или указан недопу�тимый аргумент."
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Ра�чёт у�ловного выражени�.\n"
+"    \n"
+"    Это �иноним в�троенной команды test, но по�ледним аргументом должна\n"
+"    быть �кобка «]», �оответ�твующа� открывающей «[»."
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Отображение времени проце��а.\n"
+"    \n"
+"    Показывает объединённые значени� времени пользовател� и �и�темы дл� "
+"командного\n"
+"    проце��ора и в�ех его дочерних проце��ов.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    В�егда возвращает у�пех."
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"Захват �игналов и других �обытий.\n"
+"    \n"
+"    Определ�ет и активирует обработчики, которые будут выполн�ть��, когда\n"
+"    командный проце��ор получает �игналы или при других у�лови�х.\n"
+"    \n"
+"    �ргумент — �то команда, котора� �читывает�� и выполн�ет��, когда\n"
+"    командный проце��ор получает указанные �игнал(ы).  Е�ли аргумент "
+"от�ут�твует (и указан один �игнал)\n"
+"    или указано «-», дл� в�ех указанных �игналов во��танавливают��\n"
+"    и�ходные значени�.  Е�ли аргумент — пу�та� �трока, в�е указанные �игналы "
+"игнорируют��\n"
+"    командным проце��ором и вызываемыми им командами.\n"
+"    \n"
+"    Е�ли �игнал — EXIT (0), аргумент выполн�ет�� при выходе из командного "
+"проце��ора.  Е�ли\n"
+"    �игнал — DEBUG, аргумент выполн�ет�� перед каждой про�той командой.  "
+"Е�ли\n"
+"    �игнал — RETURN, аргумент выполн�ет�� каждый раз, когда функци�\n"
+"    или �крипт выполн�ет�� в . или и�ходные в�троенные команды завершают "
+"�вою работу.  Сигнал\n"
+"    ERR означает выполнение аргумента каждый раз, когда ошибка команды "
+"приведёт\n"
+"    к выходу из командного проце��ора, когда включён параметр -e.\n"
+"    \n"
+"    Е�ли аргументы не указаны, trap выводит �пи�ок команд, �в�занных\n"
+"    � каждом �игналом.\n"
+"    \n"
+"    Параметры:\n"
+"      -l\tпоказать названи� �игналов и их номера\n"
+"      -p\tпоказать команды trap, �в�занные � каждым �игналом\n"
+"    \n"
+"    Идентификатор �игнала — �то название �игнала в <signal.h> или номер "
+"�игнала.\n"
+"    �азвани� �игналов не зави��т от реги�тра, а префик� SIG не �вл�ет�� "
+"об�зательным.   \n"
+"    Сигнал можно отправить в командный проце��ор командой «kill -signal $"
+"$».\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли был указан допу�тимый �игнал или параметр."
+
+#: builtins.c:1400
+#, fuzzy
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"Вывод информации о типе команды.\n"
+"    \n"
+"    Дл� каждого указанного имени показывает, как оно будет интерпретировано "
+"при\n"
+"    и�пользовании в каче�тве названи� команды.\n"
+"    \n"
+"    Параметры:\n"
+"      -a\tпоказать в�е ме�тоположени�, где е�ть и�полн�емый файл � указанным "
+"именем,\n"
+"    \tвключа� п�евдонимы, в�троенные команды и функции, а также при у�ловии\n"
+"    \tчто не и�пользует�� параметр «-p»\n"
+"      -f\tне и�кать функции командного проце��ора\n"
+"      -P\tпринудительно и�кать в $PATH в�е указанные имена, даже е�ли �то "
+"п�евдоним,\n"
+"    \tв�троенна� команда или функци�, и возвращать название файла на ди�ке,\n"
+"    \tкоторый будет запущен\n"
+"      -p\tвозвращает название файла на ди�ке, который будет запущен,\n"
+"    \tили ничего, е�ли «type -t им�» не возвращает «file».\n"
+"      -t\tвыве�ти одно из �лов «alias», «keyword»,\n"
+"    \t«function», «builtin», «file» или «», е�ли указанное им� �вл�ет��, "
+"�оответ�твенно,\n"
+"    \tп�евдонимом, зарезервированным �ловом, функцией, в�троенной командой\n"
+"    \tкомандного проце��ора, файлом на ди�ке или им� не было найдено\n"
+"    \n"
+"    �ргументы:\n"
+"      ИМЯ\tназвание интерпретируемой команды\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли в�е указанные имена были найдены, или ошибку в "
+"противном �лучае."
+
+#: builtins.c:1431
+#, fuzzy
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Изменение ограничений ре�ур�ов командного проце��ора.\n"
+"    \n"
+"    Позвол�ет контролировать ре�ур�ы, до�тупные командному проце��ору и "
+"�оздаваемым\n"
+"    им  проце��ам, в �и�темах, где возможен такой контроль.\n"
+"    \n"
+"    Параметры:\n"
+"      -S\tи�пользовать «м�гкое» ограничение ре�ур�ов\n"
+"      -H\tи�пользовать «жё�ткое» ограничение ре�ур�ов\n"
+"      -a\tпоказать в�е текущие ограничени�\n"
+"      -b\tразмер буфера �окета\n"
+"      -c\tмак�имальный размер �оздаваемых core-файлов\n"
+"      -d\tмак�имальный размер �егмента данных проце��а\n"
+"      -e\tмак�имальный приоритет планировани� («nice»)\n"
+"      -f\tмак�имальный размер файлов, запи�ываемых командным проце��ором и "
+"его дочерними проце��ами\n"
+"      -i\tмак�имальное чи�ло ожидающих �игналов\n"
+"      -l\tмак�имальный объём, который проце�� может заблокировать в пам�ти\n"
+"      -m\tмак�имальный объём резидентной пам�ти\n"
+"      -n\tмак�имальное чи�ло открытых файловых де�крипторов\n"
+"      -p\tразмер буфера конвейера\n"
+"      -q\tмак�имальное чи�ло байт в очеред�х �ообщений POSIX\n"
+"      -r\tмак�имальный приоритет планировани� в реальном времени\n"
+"      -s\tмак�имальный размер �тека\n"
+"      -t\tмак�имальный объём проце��орного времени в �екундах\n"
+"      -u\tмак�имальное количе�тво пользователь�ких проце��ов\n"
+"      -v\tобъём виртуальной пам�ти\n"
+"      -x\tмак�имальное чи�ло блокировок файлов\n"
+"      -T    мак�имальное количе�тво потоков\n"
+"    \n"
+"    �е в�е параметры до�тупны на в�ех платформах.\n"
+"    \n"
+"    Е�ли указано ограничение, оно �вл�ет�� новым значением дл� указанного "
+"ре�ур�а.\n"
+"    Специальные значени� «soft», «hard» и «unlimited» означают,\n"
+"    �оответ�твенно, текущее м�гкое ограничение, текущее жё�ткое ограничение "
+"и от�ут�твие ограничени�.\n"
+"    В противном �лучае выводит�� текущее значение указанного ре�ур�а.  Е�ли\n"
+"    параметр не указан, подразумевает�� и�пользование параметра -f.\n"
+"    \n"
+"    Значени� задают�� � шагом 1024 байт, кроме параметра -t � шагом в "
+"�екундах,\n"
+"    параметра -p � шагом 512 байт и параметра -u, пред�тавл�ющего\n"
+"    количе�тво проце��ов.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли был указан допу�тимый параметр или не возникла "
+"ошибка."
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"Отображение или указание ма�ки режима дл� файлов.\n"
+"    \n"
+"    Задаёт ма�ку РЕЖИМ дл� файлов, �оздаваемых пользователем.  Е�ли РЕЖИМ не "
+"указан,\n"
+"    выводит текущее значение ма�ки.\n"
+"    \n"
+"    Е�ли РЕЖИМ начинает�� � цифры, он интерпретирует�� как во�ьмеричное "
+"чи�ло.\n"
+"    В противном �лучае он �читает�� �имвольной �трокой как дл� команды "
+"chmod(1).\n"
+"    \n"
+"    Параметры:\n"
+"      -p\tе�ли РЕЖИМ не указан, выве�ти ма�ку, пригодную дл� повторного "
+"и�пользовани�\n"
+"      -S\tвыве�ти ма�ку в �имвольном виде, в противном �лучае выводит�� "
+"во�ьмеричное чи�ло\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли был указан допу�тимый РЕЖИМ или параметр."
+
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"Ожидание завершени� задани� и возврат �о�то�ни� выхода.\n"
+"    \n"
+"    Ожидает завершени� в�ех проце��ов, заданных идентификаторами\n"
+"    (идентификатор проце��а или номер задани�), и возвращает их �о�то�ние "
+"выхода.  Е�ли идентификатор\n"
+"    не указан, ожидает завершени� в�ех активных дочерних проце��ов\n"
+"    и возвращает нулевое �о�то�ние выхода.  Е�ли идентификатор не �вл�ет�� "
+"номером задани�, ожидает завершени�\n"
+"    в�ех проце��ов в конвейере данного задани�.\n"
+"    \n"
+"    Е�ли указан параметр -n, ожидает завершени� �ледующего задани�\n"
+"    возвращает его �о�то�ние выхода.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает �о�то�ние по�леднего идентификатора. Возвращает ошибку, е�ли\n"
+"    указан недопу�тимый идентификатор или параметр."
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"Ожидание завершени� проце��а и возврат �о�то�ни� выхода.\n"
+"    \n"
+"    Ожидает завершени� в�ех проце��ов, заданных идентификаторами (PID), и "
+"возвращает их �о�то�ние выхода.\n"
+"    Е�ли идентификатор проце��а не указан, ожидает завершени� в�ех активных\n"
+"    дочерних проце��ов и возвращает нулевое �о�то�ние выхода.  PID должен "
+"быть идентификатором проце��а.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает �о�то�ние по�леднего идентификатора. Возвращает ошибку, е�ли\n"
+"    указан недопу�тимый идентификатор или параметр."
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Выполнение команд дл� в�ех �лементов �пи�ка.\n"
+"    \n"
+"    Цикл «for» выполн�ет по�ледовательно�ть команд дл� каждого �лемента\n"
+"    �пи�ка.  Е�ли операнд «in СЛОВ� ...;» от�ут�твует, подразумевает��\n"
+"    операнд «in \"$@\"».  Каждому �лементу в �пи�ке СЛОВ� при�ваивает�� ИМЯ "
+"и дл� него\n"
+"    выполн�ют�� КОМ��ДЫ.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает �о�то�ние по�ледней выполненной команды."
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Математиче�кие операции в циклах.\n"
+"    \n"
+"    Эквивалентно\n"
+"    \t(( ВЫР�Ж1))\n"
+"    \twhile (( ВЫР�Ж2 )); do\n"
+"    \t\tКОМ��ДЫ\n"
+"    \t\t(( ВЫР�Ж3 ))\n"
+"    \tdone\n"
+"    ВЫР�Ж1, ВЫР�Ж2 и ВЫР�Ж3 — �то математиче�кие выражени�.  Е�ли любое из "
+"выражений\n"
+"    не указано, �читает��, что оно возвращает 1.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает �о�то�ние по�ледней выполненной команды."
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Выбор �лов из �пи�ка и выполнение команд.\n"
+"    \n"
+"    СЛОВ� разворачивают��, формиру� �пи�ок �лов.   \n"
+"    �абор развёрнутых �лов выводит�� в поток ошибок � номерами\n"
+"    в начале �трок.  Е�ли операнд «in СЛОВ� ...;» от�ут�твует, "
+"подразумевает��\n"
+"    операнд «in \"$@\"».  Затем выводит�� приглашение $PS3 и �о �тандартного "
+"ввода\n"
+"    �читывает�� �трока.  Е�ли �трока �о�тоит из номера,\n"
+"    �оответ�твующего одному из показанных �лов, �тому �лову\n"
+"    при�ваивает�� указанное им�.  Е�ли �трока пу�та�, будут повторно "
+"показаны указанные �лова\n"
+"    и приглашение.  Е�ли прочитан �имвол конца файла, команда завершает �вою "
+"работу.  Е�ли прочитаны\n"
+"    любые другие значени�, указанному имени при�ваивает�� пу�тое значение.  "
+"Прочитанна� �трока\n"
+"    �охран�ет�� в переменную $REPLY.  Команды выполн�ют�� по�ле каждой "
+"выборки,\n"
+"    пока не будет выполнена команда прерывани�.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает �о�то�ние по�ледней выполненной команды."
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"Вывод времени, потраченного на выполнение конвейера.\n"
+"    \n"
+"    Выполн�ет конвейер и выводит значени� реального времени, "
+"пользователь�кого времени\n"
+"    и �и�темного времени ЦП, потраченного на выполнени� конвейера.\n"
+"    \n"
+"    Параметры:\n"
+"      -p\tпоказать значени� времени в формате Posix\n"
+"    \n"
+"    Дл� форматировани� выходных данных и�пользует�� значение переменной "
+"$TIMEFORMAT.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращаемое �о�то�ние �оответ�твует �о�то�нию выхода конвейера."
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Выполнение команд �огла�но шаблону.\n"
+"    \n"
+"    Выполн�ет команды, когда �лово �оответ�твует шаблону.   \n"
+"    Дл� разделени� шаблонов и�пользует�� знак «|».\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает �о�то�ние по�ледней выполненной команды."
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Выполнение команд в зави�имо�ти от у�ловий.\n"
+"    \n"
+"    Сначала выполн�ет�� �пи�ок «if КОМ��ДЫ».  Е�ли �о�то�ние выхода "
+"нулевое,\n"
+"    выполн�ет�� �пи�ок «then КОМ��ДЫ».  В противном �лучае выполн�ет�� по "
+"очереди\n"
+"    в�е �пи�ки «elif КОМ��ДЫ», и е�ли их �о�то�ние выхода будет нулевым,\n"
+"    выполнит�� �пи�ок «then КОМ��ДЫ», и команда if завершит��.  В противном "
+"�лучае\n"
+"    выполнит�� �пи�ок «else КОМ��ДЫ», е�ли он указан.  Со�то�ние выхода "
+"в�ей\n"
+"    кон�трукции �оответ�твует �о�то�нию выхода по�ледней выполненной команды "
+"или будет нулевым,\n"
+"    е�ли ни одна проверка у�лови� не возвратила и�тину.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает �о�то�ние по�ледней выполненной команды."
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Выполнение команд до тех пор, пока проверка у�лови� возвращает и�тину.\n"
+"    \n"
+"    Разворачивает и выполн�ет команды до тех пор, пока по�ледн�� команда в\n"
+"    командах «while» завершает�� � нулевым �о�то�нием.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает �о�то�ние по�ледней выполненной команды."
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Выполнение команд до тех пор, пока проверка у�лови� не возвращает и�тину.\n"
+"    \n"
+"    Разворачивает и выполн�ет команды до тех пор, пока по�ледн�� команда в\n"
+"    командах «until» завершает�� � ненулевым �о�то�нием.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает �о�то�ние по�ледней выполненной команды."
+
+#: builtins.c:1671
+#, fuzzy
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"Создание дополнительного проце��а � указанным именем.\n"
+"    \n"
+"    Выполн�ет команду а�инхронно, когда �тандартный вывод и �тандартный\n"
+"    вход команды подключены через конвейер к де�крипторам файлов, которые "
+"назначены\n"
+"    указател�м 0 и 1 ма��ива переменных ИМЯ в активном командном "
+"проце��оре.\n"
+"    Им� по умолчанию — «COPROC».\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает �о�то�ние выхода команды."
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"Определение функции командного проце��ора.\n"
+"    \n"
+"    Создаёт функцию командного проце��ора � указанным именем.  При запу�ке в "
+"каче�тве про�той команды\n"
+"    ИМЯ выполн�ет КОМ��ДЫ в контек�те вызывающего их командного проце��ора.  "
+"При вызове ИМЕ�И\n"
+"    аргументы передают�� в функцию как $1...$n, а функци� получает\n"
+"    название $FUNCNAME.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли переменна� ИМЯ до�тупно дл� запи�и."
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Группировка команд.\n"
+"    \n"
+"    Выполн�ет набор команд, объединённых в группу.  Это един�твенный �по�об "
+"перенаправлени�\n"
+"    в�его набора команд.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает �о�то�ние по�ледней выполненной команды."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"Возобновление работы задани� в интерактивном режиме.\n"
+"    \n"
+"    �налогично аргументу JOB_SPEC дл� команды «fg».  Возобновл�ет\n"
+"    работу о�тановленного или фонового задани�.  Через JOB_SPEC можно задать "
+"название\n"
+"    или номер задани�.  Е�ли по�ле номера задани� указать «&», задание будет "
+"переведено\n"
+"    в фоновый режим, как е�ли бы идентификатор задани� был указан как\n"
+"    аргумент дл� команды «bg».\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает �о�то�ние возобновлённого задани�."
+
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Ра�чёт арифметиче�кого выражени�.\n"
+"    \n"
+"    Выражение ра��читывает�� по правилам дл� математиче�ких\n"
+"    выражений.  �налогично «let выражение».\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает 1, е�ли выражение равно 0, в противном �лучае возвращает 0."
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"Выполнение у�ловной команды.\n"
+"    \n"
+"    Возвращает �о�то�ние 0 или 1 в зави�имо�ти от результата ра�чёта\n"
+"    у�ловного выражени�.  Выражени� �о�тавл�ют�� из тех же примитивов, "
+"которые и�пользуют��\n"
+"    во в�троенной команде «test». Их можно объединить � помощью �ледующих "
+"операторов:\n"
+"    \n"
+"      ( выражение )\tВозвращает значение выражени�\n"
+"      ! выражение\tВозвращает и�тину, е�ли выражение ложно, в противном "
+"�лучае возвращает ложь\n"
+"      ВЫР�Ж1 && ВЫР�Ж2\tВозвращает и�тину, е�ли оба выражени� и�тинны, в "
+"противном �лучае возвращает ложь\n"
+"      ВЫР�Ж1 || ВЫР�Ж2\tВозвращает и�тину, е�ли хот� бы одно из выражений "
+"и�тинно, в противном �лучае возвращает ложь\n"
+"    \n"
+"    Е�ли и�пользуют�� операторы «==» и «!=», �трока �права от\n"
+"    оператора и�пользует�� как шаблон, и выполн�ет�� �опо�тавление по "
+"шаблону.\n"
+"    Е�ли и�пользует�� оператор «=~», �трока �права от оператора\n"
+"    оценивает�� как регул�рное выражение.\n"
+"    \n"
+"    Операторы && и || не ра��читывают ВЫР�Ж2, е�ли ВЫР�Ж1 до�таточно дл�\n"
+"    определени� значени� выражени�.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    0 или 1 в зави�имо�ти от значени� выражени�."
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"Стандартные имена переменных командного проце��ора и их и�пользование.\n"
+"    \n"
+"    BASH_VERSION\t�омер вер�ии bash.\n"
+"    CDPATH\t\tСпи�ок каталогов, разделённых двоеточи�ми, дл� пои�ка\n"
+"    \t\tв них каталогов, указанных как аргументы дл� «cd».\n"
+"    GLOBIGNORE\tСпи�ок шаблонов, разделённых двоеточи�ми и опи�ывающих имена "
+"файлов,\n"
+"    \t\tкоторые будут игнорировать�� при развёртывании пути.\n"
+"    HISTFILE\t\tИм� файла, в котором хранит�� журнал команд.\n"
+"    HISTFILESIZE\tЧи�ло �трок в файле журнала.\n"
+"    HISTSIZE\t\tЧи�ло �трок журнала, к которым может\n"
+"    \t\tполучить до�туп командный проце��ор.\n"
+"    HOME\t\tПолный путь к вашему домашнему каталогу.\n"
+"    HOSTNAME\t\tИм� данной �и�темы.\n"
+"    HOSTTYPE\t\tТип проце��ора, на котором работает данна� вер�и� bash.\n"
+"    IGNOREEOF\tУправл�ет дей�твием командного проце��ора при получении "
+"�имвола\n"
+"    \t\t�имвола конца файла в каче�тве един�твенных входных данных.  Е�ли "
+"задано, тогда значение\n"
+"    \t\t�вл�ет�� чи�лом �имволов EOF, которые могут быть\n"
+"    \t\tпрочитаны подр�д в пу�той �троке, по�ле чего командный проце��ор "
+"будет закрыт\n"
+"    \t\t(по умолчанию — 10).  Е�ли не задано, EOF означает конец входных "
+"данных.\n"
+"    MACHTYPE\t\tСтрока � опи�анием текущей �и�темы, в которой запущен bash.\n"
+"    MAILCHECK\tКак ча�то (в �екундах) bash провер�ет наличие новой почты.\n"
+"    MAILPATH\t\tСпи�ок имён файлов, разделённых двоеточи�ми, в которых bash\n"
+"    \t\tищет почту.\n"
+"    OSTYPE\t\tВер�и� Unix, в которой запущена данна� вер�и� bash.\n"
+"    PATH\t\tСпи�ок каталогов, разделённых двоеточи�ми, дл� пои�ка\n"
+"    \t\tвыполн�емых команд.\n"
+"    PROMPT_COMMAND\tКоманда, выполн�ема� перед выводом каждого\n"
+"    \t\tо�новного приглашени�.\n"
+"    PS1\t\tО�новна� �трока приглашени�.\n"
+"    PS2\t\tДополнительна� �трока приглашени�.\n"
+"    PWD\t\tПолный путь до текущего каталога.\n"
+"    SHELLOPTS\tСпи�ок включённых параметров командного проце��ора, "
+"разделённых двоеточи�ми.\n"
+"    TERM\t\t�азвание текущего типа терминала.\n"
+"    TIMEFORMAT\tФормат вывода данных о времени, показываемых\n"
+"    \t\tкомандой time.\n"
+"    auto_resume\t�епу�тое значение означает �лово в �троке запу�ка команды,\n"
+"    \t\tкоторое �начала ищет�� в �пи�ке\n"
+"    \t\tо�тановленных заданий.  Е�ли команда найдена, задание переводит�� в "
+"интерактивный режим.\n"
+"    \t\tЗначение «exact» означает, что �лово команды должно\n"
+"    \t\tточно �овпадать � командой в �пи�ке о�тановленных заданий.   \n"
+"    \t\tЗначение «substring» означает, что �лово команды\n"
+"    \t\tдолжно быть ча�тью �троки задани�.  В�е другие значени� означают,\n"
+"    \t\tчто команда должна быть префик�ом о�тановленного задани�.\n"
+"    histchars\tСимволы, управл�ющие ра�ширением журнала\n"
+"    \t\tи бы�трой под�тановкой.  Первый �имвол означает\n"
+"    \t\tпод�тановку журнала. Обычно �то «!».  Второй �имвол\n"
+"    \t\tозначает «бы�трую под�тановку». Обычно �то «^».   \n"
+"    \t\tТретий �имвол означает примечание журнала. Обычно �то «#».\n"
+"    HISTIGNORE\tСпи�ок шаблонов, разделённых двоеточи�ми и опи�ывающих "
+"команды,\n"
+"    \t\tкоторые должны быть �охранены в журнале.\n"
+
+#: builtins.c:1821
+#, fuzzy
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Добавление каталогов в �тек.\n"
+"    \n"
+"    Добавл�ет каталог в начало �тека каталогов или выполн�ет\n"
+"    ротацию �тека, помеща� в начало �тека текущий рабочий\n"
+"    каталог.  Е�ли аргументы не указаны, мен�ет ме�тами два первых "
+"каталога.\n"
+"    \n"
+"    Параметры:\n"
+"      -n\tпредотвращает обычное изменение каталога при добавлении\n"
+"    \tкаталогов в �тек, чтобы дей�тви� выполн�ли�ь только над �теком.\n"
+"    \n"
+"    �ргументы:\n"
+"      +N\tвыполн�ет ротацию �тека, чтобы N-й каталог (�лева\n"
+"    \tв �пи�ке, показанного командой «dirs», начина� � нул�)\n"
+"    \t�тал первым в �теке.\n"
+"    \n"
+"      -N\tвыполн�ет ротацию �тека, чтобы N-й каталог (�права\n"
+"    \tв �пи�ке, показанного командой «dirs», начина� � нул�)\n"
+"    \t�тал первым в �теке.\n"
+"    \n"
+"      каталог\tдобавл�ет каталог в начало �тека каталогов, дела� его\n"
+"    \tновым текущим каталогом.\n"
+"    \n"
+"    В�троенна� команда dirs показывает �тек каталогов.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли был указан допу�тимый параметр или удало�ь\n"
+"    перейти в каталог."
+
+#: builtins.c:1855
+#, fuzzy
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Удаление каталогов из �тека.\n"
+"    \n"
+"    Удал�ет запи�и из �тека каталогов.  Е�ли аргументы не указаны,\n"
+"    удал�ет первый каталог из �тека и назначает новый первый каталог.\n"
+"    \n"
+"    Параметры:\n"
+"      -n\tпредотвращает обычное изменение каталога при удалении\n"
+"    \tкаталогов из �тека, чтобы дей�тви� выполн�ли�ь только над �теком.\n"
+"    \n"
+"    �ргументы:\n"
+"      +N\tудал�ет N-ю �лева запи�ь в �пи�ке каталогов,\n"
+"    \tпоказанного командой «dirs», начина� � нул�.  �апример, «popd +0»\n"
+"    \tудал�ет первый каталог, а «popd +1» — второй каталог.\n"
+"    \n"
+"      -N\tудал�ет N-ю �права запи�ь в �пи�ке каталогов,\n"
+"    \tпоказанного командой «dirs», начина� � нул�.  �апример, «popd -0»\n"
+"    \tудал�ет по�ледний каталог, а «popd -1» — предпо�ледний каталог.\n"
+"    \n"
+"    В�троенна� команда dirs показывает �тек каталогов.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли был указан допу�тимый параметр или удало�ь\n"
+"    перейти в каталог."
+
+#: builtins.c:1885
+#, fuzzy
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Отображение �тека каталогов.\n"
+"    \n"
+"    Выводит �пи�ок запомненных на данный момент каталогов.  Каталоги\n"
+"    помещают�� в �пи�ок командой «pushd». Дл� очи�тки\n"
+"    �пи�ка и�пользует�� команда «popd».\n"
+"    \n"
+"    Параметры:\n"
+"      -c\tочи�тить �тек каталогов, удалив из него в�е �лементы\n"
+"      -l\tне выводить каталоги, начинающие�� � тильды (~),\n"
+"    \tкотора� означает домашний каталог\n"
+"      -p\tпоказать �тек по одному каталогу в �троке\n"
+"      -v\tпоказать �тек по одному каталогу в �троке\n"
+"    \tи � номером в �теке\n"
+"    \n"
+"    �ргументы:\n"
+"      +N\tпоказать N-ю запи�ь �лева в �пи�ке каталогов,\n"
+"    \tпоказанного при вызове без параметров, начина� � нул�.\n"
+"    \n"
+"      -N\tпоказать N-ю �права в �пи�ке каталогов запи�ь,\n"
+"    \tпоказанного при вызове без параметров, начина� � нул�.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли был указан допу�тимый параметр или не возникла "
+"ошибка."
+
+#: builtins.c:1916
+#, fuzzy
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"У�тановка и удаление параметров командного проце��ора.\n"
+"    \n"
+"    Измен�ет на�тройки указанных параметров командного проце��ора.  Е�ли не "
+"указать\n"
+"    аргумент � параметром, выводит в�е параметры командного проце��ора, "
+"показыва�\n"
+"    какой из них у�тановлен, а какой нет.\n"
+"    \n"
+"    Параметры:\n"
+"      -o\tограничить�� до параметров, которые заданы � помощью «set -o»\n"
+"      -p\tпоказать в�е параметры командного проце��ора и их �о�то�ние\n"
+"      -q\tничего не выводить\n"
+"      -s\tвключить (set) в�е указанные параметры\n"
+"      -u\tотключить (unset) в�е указанные параметры\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли указанный параметр включён. Возвращает ошибку,\n"
+"    е�ли был указан недопу�тимый параметр или параметр отключён."
+
+#: builtins.c:1937
+#, fuzzy
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"Форматирует и выводит аргументы �огла�но указанному формату.\n"
+"    \n"
+"    Параметры:\n"
+"      -v перем\tвыводить в указанную переменную bash, а не\n"
+"    \t\tна �тандартный вывод\n"
+"    \n"
+"    ФОРМ�Т — �то �имвольна� �трока, �одержаща� три типа объектов: про�тые\n"
+"    �имволы, которые копируют�� на �тандартный вывод, �кранирующие\n"
+"    по�ледовательно�ти, которые преобразовывают�� и копируют�� на "
+"�тандартный\n"
+"    вывод, и �пецификации, которые активируют вывод �ледующего у�пешного\n"
+"    аргумента.\n"
+"    \n"
+"    В дополнение к �тандартным �пецификаци�м формата, опи�анным в "
+"printf(1),\n"
+"    printf интерпретирует:\n"
+"    \n"
+"      %b\tразвёртывание �кранирующих по�ледовательно�тей � обратной ко�ой "
+"чертой в �оответ�твующий аргумент;\n"
+"      %q\tзаключение аргумента в кавычки, чтобы его можно было повторно "
+"и�пользовать в каче�тве входных данных дл� командного проце��ора;\n"
+"      %(fmt)T вывод �троки дата-врем�, полученной по�ле и�пользовани� FMT в "
+"каче�тве\n"
+"            �троки форматировани� дл� strftime(3)\n"
+"    \n"
+"    Е�ли необходимо задей�твовать в�е аргументы, формат и�пользует�� "
+"повторно.  Е�ли\n"
+"    аргументов меньше, чем требует�� дл� форматировани�, дополнительные\n"
+"    �пецификации форматировани� интерпретируют�� как �одержащие нулевое\n"
+"    или пу�тое значение.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли был указан допу�тимый параметр или не возникла "
+"ошибка\n"
+"    запи�и или при�воени�."
+
+#: builtins.c:1971
+#, fuzzy
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Определение количе�тва аргументов, завершаемых функцией readline.\n"
+"    \n"
+"    Дл� каждого имени нужно указать количе�тво завершаемых аргументов.  Е�ли "
+"параметры\n"
+"    не указаны, вывод�т�� �уще�твующие �пецификации завершени� формате\n"
+"    дл� повторного и�пользовани�.\n"
+"    \n"
+"    Параметры:\n"
+"      -p\tвыве�ти �уще�твующие �пецификации завершени� в формате дл� "
+"повторного и�пользовани�\n"
+"      -r\tудалить �пецификации завершени� дл� каждого имени или,\n"
+"    \tе�ли имена не указаны, в�е �пецификации\n"
+"      -D\tприменить завершени� и дей�тви� как �тандартные дл� команд,\n"
+"    \tдл� которых не определены завершени�\n"
+"      -E\tприменить завершени� и дей�тви� к «пу�тым» командам —\n"
+"    \tзавершение примен�ет�� к пу�той �троке\n"
+"    \n"
+"    Когда примен�ет�� завершение, дей�тви� выполн�ют�� в алфавитном пор�дке\n"
+"    перечи�ленных выше параметров.  Параметр -D имеет более\n"
+"    вы�окий приоритет, чем -E.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли был указан допу�тимый параметр или не возникла "
+"ошибка."
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Вывод возможных завершений в зави�имо�ти от параметров.\n"
+"    \n"
+"    compgen предназначен дл� и�пользовани� в функци�х bash, генерирующих\n"
+"    возможные завершени�.  Е�ли указан необ�зательный аргумент �лово, "
+"выполн�ет\n"
+"    �опо�тавление �о �генерированным �ловом.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли был указан допу�тимый параметр или не возникла "
+"ошибка."
+
+#: builtins.c:2016
+#, fuzzy
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"Изменение или вывод параметров завершени�.\n"
+"    \n"
+"    Измен�ет параметры завершени� дл� каждого имени или, е�ли имена\n"
+"    не указаны, дл� текущего завершени�.  Е�ли параметры не указаны, "
+"выводит\n"
+"    параметры завершени� дл� каждого имени или текущую �пецификацию "
+"завершени�.\n"
+"    \n"
+"    Параметры:\n"
+"    \t-o параметр\tзадать параметр завершени� дл� каждого имени\n"
+"    \t-D\t\tизменить параметры дл� завершени� команды «по умолчанию»\n"
+"    \t-E\t\tизменить параметры дл� завершени� «пу�той» команды\n"
+"    \n"
+"    И�пользование «+o» вме�то «-o» отключает указанный параметр.\n"
+"    \n"
+"    �ргументы:\n"
+"    \n"
+"    Каждое им� ��ылает�� на команду, дл� которой уже должна быть определена\n"
+"    �пецификаци� завершени� � помощью в�троенной команды «complete».  Е�ли "
+"имена\n"
+"    не указаны, функци�, котора� �ейча� генерирует завершени�, должна "
+"вызвать\n"
+"    compopt, и должны изменить�� параметры дл� текущего\n"
+"    генератора завершени�.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли был указан допу�тимый параметр или дл� имени\n"
+"    определена �пецификаци� завершени�."
+
+#: builtins.c:2047
+#, fuzzy
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"Чтение �трок �о �тандартного ввода в переменную индек�ированного ма��ива.\n"
+"    \n"
+"    Читает �троки �о �тандартного ввода в переменную указанного "
+"индек�ированного ма��ива\n"
+"    или из указанного файлового де�криптора, е�ли указан параметр -u.  "
+"Переменна� $MAPFILE\n"
+"    �вл�ет�� ма��ивом по умолчанию.\n"
+"    \n"
+"    Параметры:\n"
+"      -n чи�ло\tкопировать указанное чи�ло �трок  Е�ли чи�ло равно 0, "
+"копируют�� в�е �троки.\n"
+"      -O начало\tначать при�воение ма��иву, начина� � заданного указател�  "
+"По умолчанию указатель равен 0.\n"
+"      -s чи�ло \tотбро�ить указанное чи�ло первых �трок\n"
+"      -t\t\tудалить завершающие переводы �троки изо в�ех прочитанных �трок\n"
+"      -u fd\t\tчитать �троки из файлового де�криптора, а не �о �тандартного "
+"входа\n"
+"      -C callback\tоценивать callback при чтении каждой �троки quantum\n"
+"      -c quantum\tчи�ло �трок, читаемых от каждого вызова до callback\n"
+"    \n"
+"    �ргументы:\n"
+"      М�ССИВ\t\tназвание переменной ма��ива, и�пользуемой дл� данных файла.\n"
+"    \n"
+"    Е�ли параметр -C указан без -c, quantum по умолчанию равен 5000.  Когда\n"
+"    оценивает�� callback, он предо�тавл�ет указатель на �ледующий "
+"при�ваиваемый\n"
+"    �лемента ма��ива и на �троку, при�ваиваемую �тому �лементу,\n"
+"    в каче�тве дополнительных аргументов.\n"
+"    \n"
+"    Е�ли �вно не указано начало, mapfile очи�тит ма��ив до\n"
+"    операции при�воени�.\n"
+"    \n"
+"    Со�то�ние выхода:\n"
+"    Возвращает у�пех, е�ли был указан допу�тимый параметр или ма��ив "
+"до�тупен дл� запи�и\n"
+"    и �вл�ет�� индек�ированным."
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Чтение �трок из файла в переменную ма��ива.\n"
+"    \n"
+"    Синоним команды «mapfile»."
+
+#, fuzzy
+#~ msgid "Copyright (C) 2019 Free Software Foundation, Inc."
+#~ msgstr "© Free Software Foundation, Inc, 2016."
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "Возвращает контек�т вызова текущей подпрограммы.\n"
+#~ "    \n"
+#~ "    Без EXPR выполн�ет возврат "
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process: проце�� %5ld (%s) в the_pipeline"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "�еизве�тный номер �игнала"
+
+#~ msgid ":"
+#~ msgstr ":"
+
+#~ msgid "true"
+#~ msgstr "true"
+
+#~ msgid "false"
+#~ msgstr "false"
+
+#~ msgid "times"
+#~ msgstr "times"
+
+#~ msgid "Missing `}'"
+#~ msgstr "Пропущен �имвол `}'"
+
+#~ msgid "brace_expand> "
+#~ msgstr "brace_expand> "
+
+#~ msgid "Attempt to free unknown command type `%d'.\n"
+#~ msgstr ""
+#~ "Попытка о�вободить пам�ть �труктуры команды неизве�тного типа `%d'.\n"
+
+#~ msgid "Report this to %s\n"
+#~ msgstr "Сообщите об �том по адре�у %s\n"
+
+#~ msgid "Stopping myself..."
+#~ msgstr "Прекращение работы..."
+
+#~ msgid "Tell %s to fix this someday.\n"
+#~ msgstr "Скажите %s, чтобы он и�правил �то.\n"
+
+#~ msgid "execute_command: bad command type `%d'"
+#~ msgstr "execute_command: неверный тип команды '%d'"
+
+#~ msgid "real\t"
+#~ msgstr "реальное\t"
+
+#~ msgid "user\t"
+#~ msgstr "пользовател�\t"
+
+#~ msgid "sys\t"
+#~ msgstr "�и�темное\t"
+
+#~ msgid ""
+#~ "real\t0m0.00s\n"
+#~ "user\t0m0.00s\n"
+#~ "sys\t0m0.00s\n"
+#~ msgstr ""
+#~ "реальное\t0m0.00s\n"
+#~ "пользовател�\t0m0.00s\n"
+#~ "�и�темное\t0m0.00s\n"
+
+#~ msgid "cannot duplicate fd %d to fd 1: %s"
+#~ msgstr "невозможно �копировать файловый де�криптор %d в 1: %s"
+
+#~ msgid "%s: output redirection restricted"
+#~ msgstr "%s: перенаправление вывода запрещено (ограниченный режим)"
+
+#~ msgid "Out of memory!"
+#~ msgstr "�едо�таточно пам�ти!"
+
+#~ msgid "You have already added item `%s'\n"
+#~ msgstr "Элемент `%s' уже добавлен\n"
+
+#~ msgid "You have entered %d (%d) items.  The distribution is:\n"
+#~ msgstr "Создано %d (%d) �лементов. Ра�пределение:\n"
+
+#~ msgid "slot %3d: "
+#~ msgstr "�лот %3d: "
+
+#~ msgid "<unknown>"
+#~ msgstr "<неизв>"
+
+#~ msgid "%s: bg background job?"
+#~ msgstr "%s: задача уже фонова�"
+
+#~ msgid ""
+#~ "Redirection instruction from yyparse () '%d' is\n"
+#~ "out of range in make_redirection ()."
+#~ msgstr ""
+#~ "Ин�трукци� перенаправлени� yyparse () `%d'\n"
+#~ "не может быть обработана make_redirection ()."
+
+#~ msgid "clean_simple_command () got a command with type %d."
+#~ msgstr "функции clean_simple_command () передана команда типа %d."
+
+#~ msgid "got errno %d while waiting for %d"
+#~ msgstr "ошибка %d при ожидании %d"
+
+#~ msgid "syntax error near unexpected token `%c'"
+#~ msgstr "�интак�иче�ка� ошибка около неожиданной лек�емы `%c'"
+
+#~ msgid "print_command: bad command type `%d'"
+#~ msgstr "print_command: неверный тип команды `%d'"
+
+#~ msgid "cprintf: bad `%%' argument (%c)"
+#~ msgstr "cprintf: неверный �пецификатор по�ле `%%' (%c)"
+
+#~ msgid "option `%s' requires an argument"
+#~ msgstr "параметр `%s' должен и�пользовать�� � аргументом"
+
+#~ msgid "%s: unrecognized option"
+#~ msgstr "%s: неизве�тный параметр"
+
+#~ msgid "`-c' requires an argument"
+#~ msgstr "`-c' должен и�пользовать�� � аргументом"
+
+#~ msgid "%s: cannot execute directories"
+#~ msgstr "%s: каталоги не могут запу�кать�� как и�полн�емые файлы"
+
+#~ msgid "Bad code in sig.c: sigprocmask"
+#~ msgstr "�еверный код в sig.c: sigprocmask"
+
+#~ msgid "can't make pipes for process substitution: %s"
+#~ msgstr "невозможно �оздать каналы дл� под�тановки: %s"
+
+#~ msgid "reading"
+#~ msgstr "чтени�"
+
+#~ msgid "writing"
+#~ msgstr "запи�и"
+
+#~ msgid "process substitution"
+#~ msgstr "под�тановка проце��ов"
+
+#~ msgid "command substitution"
+#~ msgstr "под�тановка команд"
+
+#~ msgid "Can't reopen pipe to command substitution (fd %d): %s"
+#~ msgstr ""
+#~ "�евозможно вновь открыть канал дл� под�тановки команд (файловый "
+#~ "дек�риптор %d): %s"
+
+#~ msgid "$%c: unbound variable"
+#~ msgstr "$%c: не заданы границы"
+
+#~ msgid "%s: bad arithmetic substitution"
+#~ msgstr "%s: неверна� арифметиче�ка� под�тановка"
+
+#~ msgid "-%s: binary operator expected"
+#~ msgstr "-%s: ожидает�� бинарна� операци�"
+
+#~ msgid "%s[%s: bad subscript"
+#~ msgstr "%s[%s: неверный индек�"
+
+#~ msgid "[%s: bad subscript"
+#~ msgstr "[%s: неверный индек�"
+
+#~ msgid "xrealloc: cannot reallocate %lu bytes (%lu bytes allocated)"
+#~ msgstr ""
+#~ "xmalloc: невозможно заново выделить %lu байтов (выделено %lu байтов)"
+
+#~ msgid "digits occur in two different argv-elements.\n"
+#~ msgstr "цифры в�тречают�� в двух разных �лементах argv.\n"
+
+#~ msgid "option %c\n"
+#~ msgstr "параметр %c\n"
+
+#~ msgid "option a\n"
+#~ msgstr "параметр a\n"
+
+#~ msgid "option b\n"
+#~ msgstr "параметр b\n"
+
+#~ msgid "option c with value `%s'\n"
+#~ msgstr "параметр c �о значением `%s'\n"
+
+#~ msgid "?? sh_getopt returned character code 0%o ??\n"
+#~ msgstr "?? sh_getopt вернула код �имвола 0%o ??\n"
+
+#~ msgid "non-option ARGV-elements: "
+#~ msgstr "�лементы ARGV, не �вл�ющие�� параметрами: "
+
+#~ msgid "%s: Unknown flag %s.\n"
+#~ msgstr "%s: �еизве�тный флаг %s.\n"
+
+#~ msgid "Unknown directive `%s'"
+#~ msgstr "�еизве�тна� директива `%s'"
+
+#~ msgid "%s must be inside of a $BUILTIN block"
+#~ msgstr "%s должно быть внутри блока $BUILTIN"
+
+#~ msgid "%s found before $END"
+#~ msgstr "%s обнаружено раньше $END"
+
+#~ msgid "%s already has a function (%s)"
+#~ msgstr "В %s уже е�ть функци� (%s)"
+
+#~ msgid "%s already had a docname (%s)"
+#~ msgstr "В %s уже е�ть название документации (%s)"
+
+#~ msgid "%s already has short documentation (%s)"
+#~ msgstr "В %s уже е�ть коротка� документаци� (%s)"
+
+#~ msgid "%s already has a %s definition"
+#~ msgstr "В %s уже е�ть определение %s"
+
+#~ msgid "mkbuiltins: Out of virtual memory!\n"
+#~ msgstr "mkbuiltins: �е хватает виртуальной пам�ти!\n"
+
+#~ msgid "read [-r] [-p prompt] [-a array] [-e] [name ...]"
+#~ msgstr "read [-r] [-p приглашение] [-a ма��ив] [-e] [им� ...]"
+
+#~ msgid "%[DIGITS | WORD] [&]"
+#~ msgstr "%[ЦИФРЫ | СЛОВО] [&]"
+
+#~ msgid "variables - Some variable names and meanings"
+#~ msgstr "variables -- Имена и �мы�л некоторых переменных"
+
+#~ msgid "`alias' with no arguments or with the -p option prints the list"
+#~ msgstr "`alias' без аргументов или � параметром -p выводит на �тандартный"
+
+#~ msgid "of aliases in the form alias NAME=VALUE on standard output."
+#~ msgstr "вывод �пи�ок п�евдокоманд в виде ИМЯ=З��ЧЕ�ИЕ. В противном"
+
+#~ msgid "Otherwise, an alias is defined for each NAME whose VALUE is given."
+#~ msgstr "�лучае, дл� каждого ИМЕ�И определ�ет�� п�евдокоманда �о З��ЧЕ�ИЕМ."
+
+#~ msgid "A trailing space in VALUE causes the next word to be checked for"
+#~ msgstr ""
+#~ "Е�ли на конце З��ЧЕ�ИЯ е�ть пробелы, при разворачивании п�евдокоманды"
+
+#~ msgid "alias substitution when the alias is expanded.  Alias returns"
+#~ msgstr "�ледующее �лово провер�ет�� на под�тановку п�евдокоманд. Alias"
+
+#~ msgid "true unless a NAME is given for which no alias has been defined."
+#~ msgstr ""
+#~ "возвращает true, е�ли только не задано ИМЯ, дл� которого нет п�евдокоманд."
+
+#~ msgid ""
+#~ "Remove NAMEs from the list of defined aliases.  If the -a option is given,"
+#~ msgstr ""
+#~ "Удал�ет ИМЕ�� из �пи�ка определённых п�евдокоманд. Е�ли задан параметр -a,"
+
+#~ msgid "then remove all alias definitions."
+#~ msgstr "удал�ет в�е определени� п�евдокоманд."
+
+#~ msgid "Bind a key sequence to a Readline function, or to a macro.  The"
+#~ msgstr ""
+#~ "Св�зывает по�ледовательно�ть клавиш � функцией Readline или � макро�ом."
+
+#~ msgid "syntax is equivalent to that found in ~/.inputrc, but must be"
+#~ msgstr "Синтак�и� тот же, что и в ~/.inputrc, но должен передавать��"
+
+#~ msgid ""
+#~ "passed as a single argument: bind '\"\\C-x\\C-r\": re-read-init-file'."
+#~ msgstr "одним аргументом: bind '\"\\C-x\\C-r\": re-read-init-file'."
+
+#~ msgid "Arguments we accept:"
+#~ msgstr "Принимаемые аргументы:"
+
+#~ msgid ""
+#~ "  -m  keymap         Use `keymap' as the keymap for the duration of this"
+#~ msgstr ""
+#~ "   -m ра�кладка      И�пользовать во врем� работы программы указанную"
+
+#~ msgid "                     command.  Acceptable keymap names are emacs,"
+#~ msgstr "                     ра�кладку.  Допу�тимые имена ра�кладок: emacs,"
+
+#~ msgid ""
+#~ "                     emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move,"
+#~ msgstr ""
+#~ "                     emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move,"
+
+#~ msgid "                     vi-command, and vi-insert."
+#~ msgstr "                     vi-command и vi-insert."
+
+#~ msgid "  -l                 List names of functions."
+#~ msgstr "  -l                 Выве�ти �пи�ок имён функций."
+
+#~ msgid "  -P                 List function names and bindings."
+#~ msgstr "  -P                  Выве�ти �пи�ок имён функций и �в�зей."
+
+#~ msgid ""
+#~ "  -p                 List functions and bindings in a form that can be"
+#~ msgstr "  -p                 Выве�ти �пи�ок имён функций и �в�зей в виде,"
+
+#~ msgid "                     reused as input."
+#~ msgstr "                     который можно и�пользовать на входе."
+
+#~ msgid "  -r  keyseq         Remove the binding for KEYSEQ."
+#~ msgstr "  -r  по�лед_клавиш  Удалить �в�зь дл� `по�лед_клавиш'."
+
+#~ msgid "  -f  filename       Read key bindings from FILENAME."
+#~ msgstr "  -f  им�_файла      Проче�ть �в�зи из файла."
+
+#~ msgid ""
+#~ "  -q  function-name  Query about which keys invoke the named function."
+#~ msgstr ""
+#~ "  -q  им�_функции    Запро�, какие клавиши вызовут указанную функцию."
+
+#~ msgid "  -V                 List variable names and values"
+#~ msgstr "  -V                 Выве�ти �пи�ок имён и значений переменных."
+
+#~ msgid ""
+#~ "  -v                 List variable names and values in a form that can"
+#~ msgstr ""
+#~ "  -v                 Выве�ти �пи�ок имён и значений переменных в виде,"
+
+#~ msgid "                     be reused as input."
+#~ msgstr "                     который можно и�пользовать на входе"
+
+#~ msgid ""
+#~ "  -S                 List key sequences that invoke macros and their "
+#~ "values"
+#~ msgstr ""
+#~ "  -S                 Выве�ти �пи�ок по�ледовательно�тей клавиш, "
+#~ "вызывающих макро�ы и их значений."
+
+#~ msgid ""
+#~ "  -s                 List key sequences that invoke macros and their "
+#~ "values in"
+#~ msgstr ""
+#~ "  -s                Выве�ти �пи�ок по�ледовательно�тей клавиш, вызывающих "
+#~ "макро�ы"
+
+#~ msgid "                     a form that can be reused as input."
+#~ msgstr ""
+#~ "                     и их значений в виде, который можно и�пользовать на "
+#~ "входе"
+
+#~ msgid "Exit from within a FOR, WHILE or UNTIL loop.  If N is specified,"
+#~ msgstr "Выйти из цикла FOR, WHILE или UNTIL.  Е�ли указано N,"
+
+#~ msgid "break N levels."
+#~ msgstr "выйти из N вложенных уровней."
+
+#~ msgid "Resume the next iteration of the enclosing FOR, WHILE or UNTIL loop."
+#~ msgstr "Перейти к �ледующей итерации цикла FOR, WHILE или UNTIL."
+
+#~ msgid "If N is specified, resume at the N-th enclosing loop."
+#~ msgstr "Е�ли задано N, перейти к N-му обрамл�ющему циклу."
+
+#~ msgid "Run a shell builtin.  This is useful when you wish to rename a"
+#~ msgstr "Выполнить в�троенную команду оболочки.  Это полезно, е�ли вы хотите"
+
+#~ msgid "shell builtin to be a function, but need the functionality of the"
+#~ msgstr "�оздать функцию � именем в�троенной команды, но хотите �охранить"
+
+#~ msgid "builtin within the function itself."
+#~ msgstr "возможно�ть и�пользовани� команды из �амой функции"
+
+#~ msgid "Change the current directory to DIR.  The variable $HOME is the"
+#~ msgstr "Изменить текущий каталог на заданный.  Переменна� $HOME �одержит"
+
+#~ msgid "default DIR.  The variable $CDPATH defines the search path for"
+#~ msgstr ""
+#~ "каталог по умолчанию.  Переменна� $CDPATH определ�ет путь, в котором"
+
+#~ msgid "the directory containing DIR.  Alternative directory names in CDPATH"
+#~ msgstr ""
+#~ "ищет�� каталог, �одержащий К�Т�ЛОГ.  �льтернативные каталоги в CDPATH"
+
+#~ msgid "are separated by a colon (:).  A null directory name is the same as"
+#~ msgstr ""
+#~ "раздел�ют�� точкой � зап�той (:).  Пу�тое им� каталога -- то же �амое,"
+
+#~ msgid "the current directory, i.e. `.'.  If DIR begins with a slash (/),"
+#~ msgstr ""
+#~ "что текущий каталог, т.е. `.'.  Е�ли К�Т�ЛОГ начинает�� � дроби (/),"
+
+#~ msgid "then $CDPATH is not used.  If the directory is not found, and the"
+#~ msgstr ""
+#~ "$CDPATh не и�пользует��.  Е�ли каталог не найден, и у�тановлен параметр"
+
+#~ msgid "shell option `cdable_vars' is set, then try the word as a variable"
+#~ msgstr ""
+#~ "оболочки `cdable_vars', делает�� попытка интерпретировать �то �лово как "
+#~ "им�"
+
+#~ msgid "name.  If that variable has a value, then cd to the value of that"
+#~ msgstr ""
+#~ "переменной.  Е�ли �та переменна� имеет значение, каталог мен�ет�� на �то"
+
+#~ msgid ""
+#~ "variable.  The -P option says to use the physical directory structure"
+#~ msgstr ""
+#~ "значение.  Параметр -P указывает и�пользовать физиче�кую �труктуру "
+#~ "каталогов,"
+
+#~ msgid ""
+#~ "instead of following symbolic links; the -L option forces symbolic links"
+#~ msgstr ""
+#~ "а не �ледовать �имволчие�ким ��ылкам, параметр -L за�тавл�ет �ледовать"
+
+#~ msgid "to be followed."
+#~ msgstr "�имволиче�ким ��ылкам."
+
+#~ msgid "Print the current working directory.  With the -P option, pwd prints"
+#~ msgstr ""
+#~ "Выве�ти им� текущего рабочего каталога.  С параметром -P pwd выводит"
+
+#~ msgid "the physical directory, without any symbolic links; the -L option"
+#~ msgstr ""
+#~ "физиче�кий каталог, без �имволиче�ких ��ылок, параметр -L за�тавл�ет"
+
+#~ msgid "makes pwd follow symbolic links."
+#~ msgstr "pwd �ледовать �имволиче�ким ��ылкам."
+
+#~ msgid ""
+#~ "Runs COMMAND with ARGS ignoring shell functions.  If you have a shell"
+#~ msgstr ""
+#~ "Выполн�ет КОМ��ДУ � �РГУМЕ�Т�МИ, игнориру� функции оболочки. Е�ли у ва� "
+#~ "е�ть"
+
+#~ msgid "function called `ls', and you wish to call the command `ls', you can"
+#~ msgstr ""
+#~ "функци� оболочки `ls', а вы хотите вызвать команду `ls', можно "
+#~ "и�пользовать"
+
+#~ msgid ""
+#~ "say \"command ls\".  If the -p option is given, a default value is used"
+#~ msgstr ""
+#~ "\"command ls\".  Е�ли задан параметр -p, и�пользует�� значение $PATH"
+
+#~ msgid ""
+#~ "for PATH that is guaranteed to find all of the standard utilities.  If"
+#~ msgstr "по умолчанию, что гарантирует оты�кание �тандартных утилит.  Е�ли"
+
+#~ msgid ""
+#~ "the -V or -v option is given, a string is printed describing COMMAND."
+#~ msgstr "задан параметр -V или -v, выводит�� �трока, опи�ывающа� КОМ��ДУ."
+
+#~ msgid "The -V option produces a more verbose description."
+#~ msgstr "Параметр -V �оздаёт более подробное опи�ание."
+
+#~ msgid "Declare variables and/or give them attributes.  If no NAMEs are"
+#~ msgstr ""
+#~ "Объ�вл�ет переменные и/или придаёт им атрибуты.  Е�ли не заданы ИМЕ��,"
+
+#~ msgid "given, then display the values of variables instead.  The -p option"
+#~ msgstr "выводит вме�то �того значени� переменных.  Параметр -p выведет"
+
+#~ msgid "will display the attributes and values of each NAME."
+#~ msgstr "атрибуты и значени� каждого ИМЕ�И."
+
+#~ msgid "The flags are:"
+#~ msgstr "Флаги:"
+
+#~ msgid "  -a\tto make NAMEs arrays (if supported)"
+#~ msgstr "  -a\t�читать ИМЕ�� ма��ивами (е�ли поддерживают��)"
+
+#~ msgid "  -f\tto select from among function names only"
+#~ msgstr "  -f\tи�кать только �реди имён функций"
+
+#~ msgid "  -F\tto display function names without definitions"
+#~ msgstr "  -F\tпоказать имена функций без определений"
+
+#~ msgid "  -r\tto make NAMEs readonly"
+#~ msgstr "  -r\t�делать ИМЕ�� переменными только дл� чтени�"
+
+#~ msgid "  -x\tto make NAMEs export"
+#~ msgstr "  -x\tпозволить �к�порт ИМ��"
+
+#~ msgid "  -i\tto make NAMEs have the `integer' attribute set"
+#~ msgstr "  -i\tпридать ИМЕ��М набор атрибутов `integer' (целочи�ленный)"
+
+#~ msgid "Variables with the integer attribute have arithmetic evaluation (see"
+#~ msgstr "Дл� переменных � атрибутом `integer' арифметиче�кие вычи�лени� (�м."
+
+#~ msgid "`let') done when the variable is assigned to."
+#~ msgstr "`let') выполн�ют�� при при�воении переменной значени�."
+
+#~ msgid "When displaying values of variables, -f displays a function's name"
+#~ msgstr "При выводе значений переменных -f выводит им� и определение"
+
+#~ msgid "and definition.  The -F option restricts the display to function"
+#~ msgstr "функции.  Параметр -F ограничивает вывод именем"
+
+#~ msgid "name only."
+#~ msgstr "функции."
+
+#~ msgid ""
+#~ "Using `+' instead of `-' turns off the given attribute instead.  When"
+#~ msgstr "И�пользование `+' вме�то `-' выключает заданный атрибут.  При"
+
+#~ msgid "used in a function, makes NAMEs local, as with the `local' command."
+#~ msgstr ""
+#~ "и�пользовании в функции делает ИМЕ�а локальными, как команда `local'."
+
+#~ msgid "Obsolete.  See `declare'."
+#~ msgstr "У�тарела.  См. `declare'."
+
+#~ msgid "Create a local variable called NAME, and give it VALUE.  LOCAL"
+#~ msgstr "Создать локальную переменную ИМЯ и придать ей З��ЧЕ�ИЕ.  LOCAL"
+
+#~ msgid "have a visible scope restricted to that function and its children."
+#~ msgstr "обла�ть видимо�ти ИМЕ�И �той функцией и её потомками."
+
+#~ msgid "Output the ARGs.  If -n is specified, the trailing newline is"
+#~ msgstr "Выводит �РГУМЕ�ТЫ.  Е�ли задано -n, подавл�ет�� завершающий переход"
+
+#~ msgid "suppressed.  If the -e option is given, interpretation of the"
+#~ msgstr ""
+#~ "на новую �троку.  Е�ли задан параметр -e, интерпретируют�� �ледующие"
+
+#~ msgid "following backslash-escaped characters is turned on:"
+#~ msgstr "�кранированные �имволы:"
+
+#~ msgid "\t\\a\talert (bell)"
+#~ msgstr "\t\\a\tпредупреждение (звонок)"
+
+#~ msgid "\t\\b\tbackspace"
+#~ msgstr "\t\\b\tзабой (откат)"
+
+#~ msgid "\t\\c\tsuppress trailing newline"
+#~ msgstr "\t\\c\tподавить завершающий переход на новую �троку"
+
+#~ msgid "\t\\E\tescape character"
+#~ msgstr "\t\\E\t�кранировать �имвол"
+
+#~ msgid "\t\\f\tform feed"
+#~ msgstr "\t\\f\t�двиг на �ледующую �троку"
+
+#~ msgid "\t\\n\tnew line"
+#~ msgstr "\t\\n\tнова� �трока"
+
+#~ msgid "\t\\r\tcarriage return"
+#~ msgstr "\t\\r\tвозврат каретки"
+
+#~ msgid "\t\\t\thorizontal tab"
+#~ msgstr "\t\\t\tгоризонтальна� табул�ци�"
+
+#~ msgid "\t\\v\tvertical tab"
+#~ msgstr "\t\\v\tвертикальна� табул�ци�"
+
+#~ msgid "\t\\\\\tbackslash"
+#~ msgstr "\t\\\\\tобратна� ко�а� черта"
+
+#~ msgid "\t\\num\tthe character whose ASCII code is NUM (octal)."
+#~ msgstr "\t\\чи�ло\t�имвол, во�ьмеричный ASCII-код которого равен ЧИСЛУ"
+
+#~ msgid ""
+#~ "You can explicitly turn off the interpretation of the above characters"
+#~ msgstr "Вы можете �вно выключить интерпретацию вышеприведённых �имволов"
+
+#~ msgid "with the -E option."
+#~ msgstr "параметром -E."
+
+#~ msgid ""
+#~ "Output the ARGs.  If -n is specified, the trailing newline is suppressed."
+#~ msgstr ""
+#~ "Выводит �РГУМЕ�ТЫ.  Е�ли задано -n, подавл�ет�� завершающий переход на "
+#~ "новую �троку."
+
+#~ msgid "Enable and disable builtin shell commands.  This allows"
+#~ msgstr "Включает и блокирует в�троенные команды оболочки.  Это позвол�ет"
+
+#~ msgid "you to use a disk command which has the same name as a shell"
+#~ msgstr "и�пользовать внешние команды � теми же именами, что команды"
+
+#~ msgid "builtin.  If -n is used, the NAMEs become disabled; otherwise"
+#~ msgstr ""
+#~ "оболочки.  При и�пользовании -n ИМЕ�� блокируют��, в противном �лучае"
+
+#~ msgid "NAMEs are enabled.  For example, to use the `test' found on your"
+#~ msgstr ""
+#~ "включают��.  �апример, чтобы и�пользовать файл `test', а не в�троенную"
+
+#~ msgid "path instead of the shell builtin version, type `enable -n test'."
+#~ msgstr "в оболочку вер�ию, введите enable -n test'.  �а �и�темах,"
+
+#~ msgid "On systems supporting dynamic loading, the -f option may be used"
+#~ msgstr "поддерживающих динамиче�кую загрузку можно и�пользовать параметр -f"
+
+#~ msgid "to load new builtins from the shared object FILENAME.  The -d"
+#~ msgstr ""
+#~ "чтобы загрузить новые в�троенные команды из раздел�емого объекта Ф�ЙЛ."
+
+#~ msgid "option will delete a builtin previously loaded with -f.  If no"
+#~ msgstr "Параметр -d удал�ет команды, загруженные -f.  Е�ли имена, кроме"
+
+#~ msgid "non-option names are given, or the -p option is supplied, a list"
+#~ msgstr "как в параметрах, не заданы, или е�ли задан параметр -p, выводит��"
+
+#~ msgid "of builtins is printed.  The -a option means to print every builtin"
+#~ msgstr ""
+#~ "�пи�ок в�троенных команд.  Параметр -a требует выве�ти в�е в�троенные"
+
+#~ msgid "with an indication of whether or not it is enabled.  The -s option"
+#~ msgstr "команды � информацией, блокированы ли они.  Параметр -s выводит"
+
+#~ msgid "restricts the output to the Posix.2 `special' builtins.  The -n"
+#~ msgstr "только `�пециальные' команды Posix.2.  Параметр -n выводит �пи�ок"
+
+#~ msgid "option displays a list of all disabled builtins."
+#~ msgstr "в�ех блокированных в�троенных команд."
+
+#~ msgid ""
+#~ "Read ARGs as input to the shell and execute the resulting command(s)."
+#~ msgstr ""
+#~ "Читает �РГУМЕ�ТЫ как входной тек�т оболочки и выполн�ет полученные "
+#~ "команды."
+
+#~ msgid "Getopts is used by shell procedures to parse positional parameters."
+#~ msgstr ""
+#~ "Getopts и�пользует�� процедурами оболочки дл� анализа параметров командной"
+
+#~ msgid "OPTSTRING contains the option letters to be recognized; if a letter"
+#~ msgstr "�троки.  СТРОК�_П�Р�МЕТРОВ �одержит буквы параметров, которые нужно"
+
+#~ msgid "is followed by a colon, the option is expected to have an argument,"
+#~ msgstr ""
+#~ "ра�познать.  Е�ли за буквой �ледует двоеточие, параметр должен иметь"
+
+#~ msgid "which should be separated from it by white space."
+#~ msgstr "аргумент, отделённый от него промежутком."
+
+#~ msgid "Each time it is invoked, getopts will place the next option in the"
+#~ msgstr "При каждом вызове getopts помещает �ледующий параметр в переменную"
+
+#~ msgid "shell variable $name, initializing name if it does not exist, and"
+#~ msgstr "оболочки $им�, инициализиру� им�, е�ли оно не �уще�твует, а индек�"
+
+#~ msgid "the index of the next argument to be processed into the shell"
+#~ msgstr "�ледующего аргумента в переменную оболочки OPTIND.  OPTIND"
+
+#~ msgid "variable OPTIND.  OPTIND is initialized to 1 each time the shell or"
+#~ msgstr ""
+#~ "принимает значение 1 при каждом вызове оболочки или �крипта оболочки."
+
+#~ msgid "a shell script is invoked.  When an option requires an argument,"
+#~ msgstr "Е�ли параметр требует аргумента, getopts помещает �тот аргумент"
+
+#~ msgid "getopts places that argument into the shell variable OPTARG."
+#~ msgstr "в переменную оболочки OPTARG."
+
+#~ msgid "getopts reports errors in one of two ways.  If the first character"
+#~ msgstr ""
+#~ "getopts �ообщает об ошибках одним из двух �по�обов. Е�ли первый �имвол"
+
+#~ msgid "of OPTSTRING is a colon, getopts uses silent error reporting.  In"
+#~ msgstr ""
+#~ "OPTSTRING -- двоеточие, getopts и�пользует бе�шумный �по�об.  В �том"
+
+#~ msgid "this mode, no error messages are printed.  If an illegal option is"
+#~ msgstr "�лучае �ообщени� об ошибках не вывод�т��.  Е�ли найден недопу�тимый"
+
+#~ msgid "seen, getopts places the option character found into OPTARG.  If a"
+#~ msgstr ""
+#~ "параметр, getopts помещает найденный �имвол в OPTARG.  Е�ли не найден"
+
+#~ msgid "required argument is not found, getopts places a ':' into NAME and"
+#~ msgstr "требуемый аргумент, getopts помещает в ИМЯ ':', а в OPTARG --"
+
+#~ msgid "sets OPTARG to the option character found.  If getopts is not in"
+#~ msgstr "найденный �имвол.  Е�ли getopts работает не в бе�шумном режиме"
+
+#~ msgid "silent mode, and an illegal option is seen, getopts places '?' into"
+#~ msgstr "и обнаружен недопу�тимый параметр, getopts помещает в ИМЯ '?', и"
+
+#~ msgid "NAME and unsets OPTARG.  If a required option is not found, a '?'"
+#~ msgstr "�бра�ывает OPTARG.  Е�ли не найден требуемый параметр, в ИМЯ"
+
+#~ msgid "is placed in NAME, OPTARG is unset, and a diagnostic message is"
+#~ msgstr "помещает�� '?', OPTARG �бра�ывает��, и выводит�� диагно�тиче�кое"
+
+#~ msgid "printed."
+#~ msgstr "�ообщение."
+
+#~ msgid "If the shell variable OPTERR has the value 0, getopts disables the"
+#~ msgstr "Е�ли переменна� оболочки OPTERR имеет значение 0, getopts блокирует"
+
+#~ msgid "printing of error messages, even if the first character of"
+#~ msgstr "вывод �ообщений об ошибках, даже е�ли первый �имвол OPTSTRING"
+
+#~ msgid "OPTSTRING is not a colon.  OPTERR has the value 1 by default."
+#~ msgstr "не двоеточие.  По умолчанию OPTERR имеет значение 1."
+
+#~ msgid "Getopts normally parses the positional parameters ($0 - $9), but if"
+#~ msgstr "Getopts обычно разбирает позиционные параметры ($0 - $9), но е�ли"
+
+#~ msgid "more arguments are given, they are parsed instead."
+#~ msgstr "заданы дополнительные аргументы, вме�то �того разбирают�� они"
+
+#~ msgid "Exec FILE, replacing this shell with the specified program."
+#~ msgstr "Запу�тить Ф�ЙЛ, замеща� �ту копию оболочки указанной программой."
+
+#~ msgid "If FILE is not specified, the redirections take effect in this"
+#~ msgstr "Е�ли Ф�ЙЛ не задан, могут быть переназначены файловые де�крипторы."
+
+#~ msgid "shell.  If the first argument is `-l', then place a dash in the"
+#~ msgstr "Е�ли первый аргумент `-l', в начало нулевого аргумента, переданного"
+
+#~ msgid "zeroth arg passed to FILE, as login does.  If the `-c' option"
+#~ msgstr "Ф�ЙЛУ, добавл�ет�� `-', как при работе login.  Е�ли задан параметр"
+
+#~ msgid "is supplied, FILE is executed with a null environment.  The `-a'"
+#~ msgstr "`-c', Ф�ЙЛ выполн�ет�� в пу�той �реде.  Параметр `-a' у�танавливает"
+
+#~ msgid "option means to make set argv[0] of the executed process to NAME."
+#~ msgstr "argv[0] запущенного проце��а в ИМЯ."
+
+#~ msgid "If the file cannot be executed and the shell is not interactive,"
+#~ msgstr "Е�ли файл не может быть запущен, а оболочка не интерактивна,"
+
+#~ msgid "then the shell exits, unless the variable \"no_exit_on_failed_exec\""
+#~ msgstr ""
+#~ "производит�� выход из оболочки, е�ли только не у�тановлена переменна�"
+
+#~ msgid "is set."
+#~ msgstr "\"no_exit_on_failed_exec\""
+
+#~ msgid "is that of the last command executed."
+#~ msgstr "завершени� будет таким же, как у по�ледней выполненной команды."
+
+#~ msgid ""
+#~ "FIRST and LAST can be numbers specifying the range, or FIRST can be a"
+#~ msgstr ""
+#~ "ПЕРВ�Я и ПОСЛЕД�ЯЯ могут быть чи�лами, ограничивающими диапазон, или"
+
+#~ msgid "string, which means the most recent command beginning with that"
+#~ msgstr "же ПЕРВ�Я может быть �трокой, означающей �амую недавнюю команду,"
+
+#~ msgid "string."
+#~ msgstr "начинающую�� � �той �троки."
+
+#~ msgid ""
+#~ "   -e ENAME selects which editor to use.  Default is FCEDIT, then EDITOR,"
+#~ msgstr ""
+#~ "   -e ИМЯ_РЕД�КТОР� выбирает и�пользуемый редактор.  По умолчанию FCEDIT,"
+
+#~ msgid ""
+#~ "      then the editor which corresponds to the current readline editing"
+#~ msgstr "      затем EDITOR, затем редактор, �оответ�твуюший текущему режиму"
+
+#~ msgid "      mode, then vi."
+#~ msgstr "      редактировани� readline, затем vi."
+
+#~ msgid "   -l means list lines instead of editing."
+#~ msgstr "   -l выве�ти, а не редактировать �троки."
+
+#~ msgid "   -n means no line numbers listed."
+#~ msgstr "   -n не выводить номера �трок."
+
+#~ msgid ""
+#~ "   -r means reverse the order of the lines (making it newest listed "
+#~ "first)."
+#~ msgstr "   -r выве�ти �троки в обратном пор�дке (в начале �амые новые)."
+
+#~ msgid "With the `fc -s [pat=rep ...] [command]' format, the command is"
+#~ msgstr ""
+#~ "В формате `fc -s [шаблон=замена] [команда]  команда выполн�ет�� заново"
+
+#~ msgid "re-executed after the substitution OLD=NEW is performed."
+#~ msgstr "по�ле того, как произведена под�тановка."
+
+#~ msgid "A useful alias to use with this is r='fc -s', so that typing `r cc'"
+#~ msgstr "Полезна� п�евдокоманда -- r='fc -s', так `r cc' выполн�ет по�леднюю"
+
+#~ msgid "runs the last command beginning with `cc' and typing `r' re-executes"
+#~ msgstr "команду, начинающую�� � `cc', а `r' заново выполн�ет по�леднюю"
+
+#~ msgid "Place JOB_SPEC in the foreground, and make it the current job.  If"
+#~ msgstr ""
+#~ "Возвращает задачу � указанным номером из фонового режима и делает её"
+
+#~ msgid "JOB_SPEC is not present, the shell's notion of the current job is"
+#~ msgstr "текущей задачей. Е�ли номер не задан, и�пользует�� пред�тавление"
+
+#~ msgid "used."
+#~ msgstr "оболочки о текущей задаче."
+
+#~ msgid "Place JOB_SPEC in the background, as if it had been started with"
+#~ msgstr ""
+#~ "Переводит задачу � указанным номером в фоновый режим, как е�ли бы она"
+
+#~ msgid "`&'.  If JOB_SPEC is not present, the shell's notion of the current"
+#~ msgstr ""
+#~ "была запущена � `&'.  Е�ли номер не задан, и�пользует�� пред�тавление"
+
+#~ msgid "job is used."
+#~ msgstr "оболочки о текущей задаче."
+
+#~ msgid "For each NAME, the full pathname of the command is determined and"
+#~ msgstr "Дл� каждого ИМЕ�И определ�ют�� и запоминают�� полные пути команды."
+
+#~ msgid "remembered.  If the -p option is supplied, PATHNAME is used as the"
+#~ msgstr "Е�ли задан параметр -p, в каче�тве пути и�пользует�� заданный, а"
+
+#~ msgid "full pathname of NAME, and no path search is performed.  The -r"
+#~ msgstr "пои�к не выполн�ет��.  Параметр -r за�тавл�ет оболочку очи�тить"
+
+#~ msgid "option causes the shell to forget all remembered locations.  If no"
+#~ msgstr "�пи�ок положений в пам�ти.  Е�ли аргументы не заданы, выводит��"
+
+#~ msgid ""
+#~ "arguments are given, information about remembered commands is displayed."
+#~ msgstr "информаци� о запомненных командах."
+
+#~ msgid "Display helpful information about builtin commands.  If PATTERN is"
+#~ msgstr ""
+#~ "Выве�ти полезную информацию о в�троенных командах.  Е�ли задан Ш�БЛО�,"
+
+#~ msgid "specified, gives detailed help on all commands matching PATTERN,"
+#~ msgstr ""
+#~ "выве�ти подробную �правку по в�ем командам, �оответ�твующим Ш�БЛО�У,"
+
+#~ msgid "otherwise a list of the builtins is printed."
+#~ msgstr "в противном �лучае выве�ти �пи�ок в�троенных команд."
+
+#~ msgid "Display the history list with line numbers.  Lines listed with"
+#~ msgstr "Выве�ти и�торию команд в виде �пи�ка � номерами �трок.  Изменённые"
+
+#~ msgid "with a `*' have been modified.  Argument of N says to list only"
+#~ msgstr ""
+#~ "�троки помечают�� �имволом `*'.  �ргумент N указывает выводить только"
+
+#~ msgid "the last N lines.  The -c option causes the history list to be"
+#~ msgstr "по�ледние N �трок.  Параметр -c очищает и�торию команд, удал��"
+
+#~ msgid ""
+#~ "cleared by deleting all of the entries.  The `-w' option writes out the"
+#~ msgstr "в�е �троки.  Параметр `-w' запи�ывает текущую и�торию в указанный"
+
+#~ msgid ""
+#~ "current history to the history file;  `-r' means to read the file and"
+#~ msgstr "файл; `-r' читает такой файл и дополн�ет его �одержимым и�торию"
+
+#~ msgid "append the contents to the history list instead.  `-a' means"
+#~ msgstr "команд.  `-a' добавл�ет и�торию �той �е��ии к файлу и�тории"
+
+#~ msgid "to append history lines from this session to the history file."
+#~ msgstr "команд.  �ргумент `-n' читает из файла и�тории в�е �троки, не"
+
+#~ msgid "Argument `-n' means to read all history lines not already read"
+#~ msgstr "прочитанные ранее, и добавл�ет их к и�тории.  Е�ли задан Ф�ЙЛ,"
+
+#~ msgid "from the history file and append them to the history list.  If"
+#~ msgstr "в каче�тве файла и�тории команд и�пользует�� он, иначе, е�ли"
+
+#~ msgid "FILENAME is given, then that is used as the history file else"
+#~ msgstr "переменной $HISTFILE при�воено значение, и�пользует�� оно, иначе"
+
+#~ msgid "if $HISTFILE has a value, that is used, else ~/.bash_history."
+#~ msgstr "и�пользует�� ~/.bash_history.  Е�ли задан параметр -s, �РГУМЕ�ТЫ,"
+
+#~ msgid "If the -s option is supplied, the non-option ARGs are appended to"
+#~ msgstr "�вл�ющие�� параметрами, добавл�ют�� к и�тории как один �лемент."
+
+#~ msgid "the history list as a single entry.  The -p option means to perform"
+#~ msgstr "Параметр -p выполн�ет развёртывание каждого �РГУМЕ�Т� и выводит"
+
+#~ msgid ""
+#~ "history expansion on each ARG and display the result, without storing"
+#~ msgstr "результат, не �охран�� ничего в �пи�ке и�тории команд."
+
+#~ msgid "anything in the history list."
+#~ msgstr " "
+
+#~ msgid "Lists the active jobs.  The -l option lists process id's in addition"
+#~ msgstr "Выводит �пи�ок активных задач.  Параметр -l выводит, кроме того,"
+
+#~ msgid "to the normal information; the -p option lists process id's only."
+#~ msgstr "идентификаторы проце��ов: параметр -p выодит только идентификаторы."
+
+#~ msgid ""
+#~ "If -n is given, only processes that have changed status since the last"
+#~ msgstr "Е�ли задано -n, вывод�т�� только проце��ы, �тату� которых изменил��"
+
+#~ msgid ""
+#~ "notification are printed.  JOBSPEC restricts output to that job.  The"
+#~ msgstr ""
+#~ "�о времени по�леднего уведомлени�.  Е�ли задан номер задачи, выводит��"
+
+#~ msgid "-r and -s options restrict output to running and stopped jobs only,"
+#~ msgstr "только она.  Параметры -r и -s выводит только работающие или только"
+
+#~ msgid "respectively.  Without options, the status of all active jobs is"
+#~ msgstr ""
+#~ "о�тановленные задачи �оответ�твенно.  Без параметров выодит�� �тату�"
+
+#~ msgid ""
+#~ "printed.  If -x is given, COMMAND is run after all job specifications"
+#~ msgstr ""
+#~ "в�ех активных задач.  Е�ли задано -x, в КОМ��ДЕ вме�то в�ех �РГУМЕ�ТОВ"
+
+#~ msgid ""
+#~ "that appear in ARGS have been replaced with the process ID of that job's"
+#~ msgstr "(номеров задач) под�тавл�ет�� идентификатор лидера �оответ�твующей"
+
+#~ msgid "process group leader."
+#~ msgstr "группы проце��ов, и КОМ��Д� выполн�ет��."
+
+#~ msgid "Removes each JOBSPEC argument from the table of active jobs."
+#~ msgstr ""
+#~ "Удал�ет в�е задачи, заданные �пецификаци�ми в аргументе, из таблицы задач."
+
+#~ msgid "Send the processes named by PID (or JOB) the signal SIGSPEC.  If"
+#~ msgstr ""
+#~ "По�ылает указанным проце��ам (заданным PID или �пецификацией) �игнал"
+
+#~ msgid ""
+#~ "SIGSPEC is not present, then SIGTERM is assumed.  An argument of `-l'"
+#~ msgstr "SIGSPEC. Е�ли от�ут�твует SIGSPEC, по�ылает�� SIGTERM. �ргументом"
+
+#~ msgid "lists the signal names; if arguments follow `-l' they are assumed to"
+#~ msgstr ""
+#~ "параметра `-l' �лужит �пи�ок �игналов. Е�ли он при�ут�твует, вывод�т��"
+
+#~ msgid "be signal numbers for which names should be listed.  Kill is a shell"
+#~ msgstr ""
+#~ "названи� �игналов � �тими номерами. Kill �вл�ет�� в�троенной командой"
+
+#~ msgid "builtin for two reasons: it allows job IDs to be used instead of"
+#~ msgstr "оболочки по двум причинам: она позвол�ет и�пользовать номера задач,"
+
+#~ msgid "process IDs, and, if you have reached the limit on processes that"
+#~ msgstr "а не проце��ов, и е�ли вы и�черпаете лимит �озданных проце��ов,"
+
+#~ msgid ""
+#~ "you can create, you don't have to start a process to kill another one."
+#~ msgstr "вы не �можете запу�тить новый проце��, уничтожающий один из �тарых."
+
+#~ msgid "Each ARG is an arithmetic expression to be evaluated.  Evaluation"
+#~ msgstr "Каждый аргумент ра��матривает�� как арифметиче�кое выражение."
+
+#~ msgid "is done in long integers with no check for overflow, though division"
+#~ msgstr ""
+#~ "Вычи�ление производит�� над длинными целыми без контрол� переполнени�,"
+
+#~ msgid "by 0 is trapped and flagged as an error.  The following list of"
+#~ msgstr "хот� деление на ноль от�леживает�� и �читает�� ошибкой. Операции в"
+
+#~ msgid "operators is grouped into levels of equal-precedence operators."
+#~ msgstr "�ледующем �пи�ке �группированы по уровн�м равного приоритета."
+
+#~ msgid "The levels are listed in order of decreasing precedence."
+#~ msgstr "Уровни перечи�лены в пор�дке уменьшени� приоритета."
+
+#~ msgid "\t-, +\t\tunary minus, plus"
+#~ msgstr "\t-, +\t\tунарный мину�, унарный плю�"
+
+#~ msgid "\t!, ~\t\tlogical and bitwise negation"
+#~ msgstr "\t!, ~\t\tлогиче�кое и побитовое отрицание"
+
+#~ msgid "\t*, /, %\t\tmultiplication, division, remainder"
+#~ msgstr "\t*, /, %\t\tумножение, деление, вз�тие о�татка"
+
+#~ msgid "\t+, -\t\taddition, subtraction"
+#~ msgstr "\t+, -\t\t�ложение, вычитание"
+
+#~ msgid "\t<<, >>\t\tleft and right bitwise shifts"
+#~ msgstr "\t<<, >>\t\tлевый и правый побитовый �двиг"
+
+#~ msgid "\t<=, >=, <, >\tcomparison"
+#~ msgstr "\t<=, >=, <, >\t�равнение"
+
+#~ msgid "\t==, !=\t\tequality, inequality"
+#~ msgstr "\t==, !=\t\tравен�тво, неравен�тво"
+
+#~ msgid "\t&\t\tbitwise AND"
+#~ msgstr "\t&\t\tпобитовое И"
+
+#~ msgid "\t^\t\tbitwise XOR"
+#~ msgstr "\t^\t\tпобитовое ИСКЛЮЧ�ЮЩЕЕ ИЛИ"
+
+#~ msgid "\t|\t\tbitwise OR"
+#~ msgstr "\t|\t\tпобитовое ИЛИ"
+
+#~ msgid "\t&&\t\tlogical AND"
+#~ msgstr "\t&&\t\tлогиче�кое И"
+
+#~ msgid "\t||\t\tlogical OR"
+#~ msgstr "\t||\t\tлогиче�кое ИЛИ"
+
+#~ msgid "\texpr ? expr : expr"
+#~ msgstr "\texpt ? expr : expr"
+
+#~ msgid "\t\t\tconditional expression"
+#~ msgstr "\t\t\tу�ловное выражение"
+
+#~ msgid "\t=, *=, /=, %=,"
+#~ msgstr "\t=, *=, /=, %=,"
+
+#~ msgid "\t+=, -=, <<=, >>=,"
+#~ msgstr "\t+=, -=, <<=, >>=,"
+
+#~ msgid "\t&=, ^=, |=\tassignment"
+#~ msgstr "\t&=, ^=, |=\tпри�ваивание"
+
+#~ msgid "is replaced by its value (coerced to a long integer) within"
+#~ msgstr "переменной замен�ет�� её значение (преобразованным в длинное"
+
+#~ msgid "an expression.  The variable need not have its integer attribute"
+#~ msgstr "целое). Дл� и�пользовани� в выражении переменна� не об�зана иметь"
+
+#~ msgid "turned on to be used in an expression."
+#~ msgstr "у�тановленный целочи�ленный атрибут."
+
+#~ msgid "Operators are evaluated in order of precedence.  Sub-expressions in"
+#~ msgstr "Операции обрабатывают�� в пор�дке приоритета. Подвыражени� в"
+
+#~ msgid "parentheses are evaluated first and may override the precedence"
+#~ msgstr "�кобках вычи�л�ют�� вначале, что может не �оответ�твовать правилам"
+
+#~ msgid "rules above."
+#~ msgstr "приоритета."
+
+#~ msgid "If the last ARG evaluates to 0, let returns 1; 0 is returned"
+#~ msgstr "Е�ли вычи�ление по�леднего аргумента дало 0, let возвращает 1,"
+
+#~ msgid "otherwise."
+#~ msgstr "иначе 0."
+
+#~ msgid "One line is read from the standard input, and the first word is"
+#~ msgstr "Со �тандартного ввода �читывает�� одна �трока, первое её �лово"
+
+#~ msgid ""
+#~ "assigned to the first NAME, the second word to the second NAME, and so"
+#~ msgstr "�тановит�� значением первого ИМЕ�И, второе -- второго ИМЕ�И и т.д."
+
+#~ msgid ""
+#~ "on, with leftover words assigned to the last NAME.  Only the characters"
+#~ msgstr ""
+#~ "По�леднему ИМЕ�И при�ваивает�� ве�ь о�таток �троки. Разделител�ми �лов"
+
+#~ msgid "found in $IFS are recognized as word delimiters.  The return code is"
+#~ msgstr "�читают�� только �имволы, вход�щие в $IFS. Код возврата равен нулю,"
+
+#~ msgid ""
+#~ "zero, unless end-of-file is encountered.  If no NAMEs are supplied, the"
+#~ msgstr "за и�ключением �луча�, е�ли в�третил�� конец файла. Е�ли ИМЕ�� не"
+
+#~ msgid ""
+#~ "line read is stored in the REPLY variable.  If the -r option is given,"
+#~ msgstr ""
+#~ "заданы, прочитанна� �трока помещает�� в переменную REPLY. Е�ли задан"
+
+#~ msgid "this signifies `raw' input, and backslash escaping is disabled.  If"
+#~ msgstr ""
+#~ "параметр -r, �то означает `�ырой' ввод, т.е. �имвол \\ не �кранирует"
+
+#~ msgid "the `-p' option is supplied, the string supplied as an argument is"
+#~ msgstr ""
+#~ "�имволы. Е�ли задано `-p', перед чтением на вывод в каче�тве аргумента"
+
+#~ msgid ""
+#~ "output without a trailing newline before attempting to read.  If -a is"
+#~ msgstr ""
+#~ "подаёт�� заданна� �трока (без завершающего �имвола перевода �троки)."
+
+#~ msgid ""
+#~ "supplied, the words read are assigned to sequential indices of ARRAY,"
+#~ msgstr "Е�ли задано -a, прочитанные �лова �танов�т�� значени�ми �лементов"
+
+#~ msgid "starting at zero.  If -e is supplied and the shell is interactive,"
+#~ msgstr ""
+#~ "М�ССИВ�, начина� � нулевого. Е�ли задано -c и оболочка интерактивна,"
+
+#~ msgid "readline is used to obtain the line."
+#~ msgstr "чтобы получить �троку и�пользует�� readline."
+
+#~ msgid ""
+#~ "Causes a function to exit with the return value specified by N.  If N"
+#~ msgstr "За�тавл�ет функцию завершить работу � кодом возврата, заданным N."
+
+#~ msgid "is omitted, the return status is that of the last command."
+#~ msgstr "Е�ли N опущено, им �тановит�� код возврата по�ледней команды."
+
+#~ msgid "    -a  Mark variables which are modified or created for export."
+#~ msgstr ""
+#~ "    -a  Эк�портировать переменные, которые измен�ли�ь или �оздавали�ь."
+
+#~ msgid "    -b  Notify of job termination immediately."
+#~ msgstr "    -b  �емедленно выводить �ообщени� о завершении задач."
+
+#~ msgid "    -e  Exit immediately if a command exits with a non-zero status."
+#~ msgstr "    -e  Завершить работу, е�ли команд возврата команды не равен 0."
+
+#~ msgid "    -f  Disable file name generation (globbing)."
+#~ msgstr "    -f  Прекратить ра�ширение имён файлов (globbing)."
+
+#~ msgid "    -h  Remember the location of commands as they are looked up."
+#~ msgstr "    -h  Запоминать ра�положение обработанных команд."
+
+#~ msgid ""
+#~ "    -i  Force the shell to be an \"interactive\" one.  Interactive shells"
+#~ msgstr "    -i  Сделать оболочку \"интерактивной\". Интерактивные оболочки"
+
+#~ msgid "        always read `~/.bashrc' on startup."
+#~ msgstr "        читают `~/.bashrc' при каждом запу�ке."
+
+#~ msgid "    -k  All assignment arguments are placed in the environment for a"
+#~ msgstr "    -k  В �реду команды помещают�� в�е аргументы при�ваивани�,"
+
+#~ msgid "        command, not just those that precede the command name."
+#~ msgstr "        а не только предше�твующие её имени."
+
+#~ msgid "    -m  Job control is enabled."
+#~ msgstr "    -m  Включить управление задачами."
+
+#~ msgid "    -n  Read commands but do not execute them."
+#~ msgstr "    -n  Считывать команды, но не выполн�ть их."
+
+#~ msgid "    -o option-name"
+#~ msgstr "    -o им�_параметра"
+
+#~ msgid "        Set the variable corresponding to option-name:"
+#~ msgstr "        У�тановить режим в �оответ�твии � заданным именем:"
+
+#~ msgid "            allexport    same as -a"
+#~ msgstr "            allexport    то же, что -a"
+
+#~ msgid "            braceexpand  same as -B"
+#~ msgstr "            braceexpand  то же, что -B"
+
+#~ msgid "            emacs        use an emacs-style line editing interface"
+#~ msgstr ""
+#~ "            emacs        и�пользовать �тиль редактировани� �трок emacs"
+
+#~ msgid "            errexit      same as -e"
+#~ msgstr "            errexit      то же, что -e"
+
+#~ msgid "            hashall      same as -h"
+#~ msgstr "            hashall      то же, что -h"
+
+#~ msgid "            histexpand   same as -H"
+#~ msgstr "            histexpand   то же, что -H"
+
+#~ msgid "            ignoreeof    the shell will not exit upon reading EOF"
+#~ msgstr "            ignoreeof    при чтении EOF оболочка не завершит работу"
+
+#~ msgid "            interactive-comments"
+#~ msgstr "            interactive-comments"
+
+#~ msgid ""
+#~ "                         allow comments to appear in interactive commands"
+#~ msgstr ""
+#~ "                        допу�кает комментарии в интерактивных командах"
+
+#~ msgid "            keyword      same as -k"
+#~ msgstr "            keyword      то же, что -k"
+
+#~ msgid "            monitor      same as -m"
+#~ msgstr "            monitor      то же, что -m"
+
+#~ msgid "            noclobber    same as -C"
+#~ msgstr "            noclobber    то же, что -C"
+
+#~ msgid "            noexec       same as -n"
+#~ msgstr "            noexec       то же, что -n"
+
+#~ msgid "            noglob       same as -f"
+#~ msgstr "            noglob       то же, что -f"
+
+#~ msgid "            notify       save as -b"
+#~ msgstr "            notify       то же, что -b"
+
+#~ msgid "            nounset      same as -u"
+#~ msgstr "            nounset      то же, что -u"
+
+#~ msgid "            onecmd       same as -t"
+#~ msgstr "            onecmd       то же, что -t"
+
+#~ msgid "            physical     same as -P"
+#~ msgstr "            physical     то же, что -P"
+
+#~ msgid ""
+#~ "            posix        change the behavior of bash where the default"
+#~ msgstr "            posix        приве�ти поведение bash, по умолчанию не"
+
+#~ msgid ""
+#~ "                         operation differs from the 1003.2 standard to"
+#~ msgstr "                        �оответ�твующее �тандарту 1003.2, в"
+
+#~ msgid "                         match the standard"
+#~ msgstr "                        �оответ�твие � ним"
+
+#~ msgid "            privileged   same as -p"
+#~ msgstr "            privileged   то же, что -p"
+
+#~ msgid "            verbose      same as -v"
+#~ msgstr "            verbose      то же, что -v"
+
+#~ msgid "            vi           use a vi-style line editing interface"
+#~ msgstr "            vi           и�пользовать �тиль редактировани� �трок vi"
+
+#~ msgid "            xtrace       same as -x"
+#~ msgstr "            xtrace       то же, что -x"
+
+#~ msgid ""
+#~ "    -p  Turned on whenever the real and effective user ids do not match."
+#~ msgstr ""
+#~ "    -p  Е�ли реальный и �ффективный uid не �овпадают, включает�� в�егда."
+
+#~ msgid "        Disables processing of the $ENV file and importing of shell"
+#~ msgstr "        Отключает обработку файла $ENV и импорт функций оболочки."
+
+#~ msgid ""
+#~ "        functions.  Turning this option off causes the effective uid and"
+#~ msgstr ""
+#~ "        При выключении �того параметра �ффективные uid и gid �танов�т��"
+
+#~ msgid "        gid to be set to the real uid and gid."
+#~ msgstr "        равными реальным."
+
+#~ msgid "    -t  Exit after reading and executing one command."
+#~ msgstr "    -t  Завершить работу по�ле чтени� и выполнени� одной команды."
+
+#~ msgid "    -u  Treat unset variables as an error when substituting."
+#~ msgstr ""
+#~ "    -u  При под�тановке �читать не у�тановленные переменные ошибками."
+
+#~ msgid "    -v  Print shell input lines as they are read."
+#~ msgstr "    -v  Выводить прочитанные �троки входного тек�та оболочки."
+
+#~ msgid "    -x  Print commands and their arguments as they are executed."
+#~ msgstr "    -x  Выводить по мере и�полнени� команд и их аргументы."
+
+#~ msgid "    -B  the shell will perform brace expansion"
+#~ msgstr "    -B  оболочка будет производить под�тановку �кобок"
+
+#~ msgid "    -H  Enable ! style history substitution.  This flag is on"
+#~ msgstr "    -H  Включить !-�тиль под�тановки и�тории. Включено"
+
+#~ msgid "        by default."
+#~ msgstr "        по умолчанию."
+
+#~ msgid "    -C  If set, disallow existing regular files to be overwritten"
+#~ msgstr "    -C  Е�ли у�тановлен, запретить перезапи�ь �уще�твующих"
+
+#~ msgid "        by redirection of output."
+#~ msgstr "        обычных файлов при перенаправлении вывода."
+
+#~ msgid "    -P  If set, do not follow symbolic links when executing commands"
+#~ msgstr ""
+#~ "    -P  �е �ледовать �имволиче�ким ��ылкам при выполнении таких команд,"
+
+#~ msgid "        such as cd which change the current directory."
+#~ msgstr "        как cd, т.е. измен�ющих текущий каталог."
+
+#~ msgid "Using + rather than - causes these flags to be turned off.  The"
+#~ msgstr "И�пользование + вме�то - отключает флаг. Эти флаги могут также"
+
+#~ msgid "flags can also be used upon invocation of the shell.  The current"
+#~ msgstr ""
+#~ "и�пользовать�� при запу�ке оболочки. Текущий набор флагов �одержит��"
+
+#~ msgid ""
+#~ "set of flags may be found in $-.  The remaining n ARGs are positional"
+#~ msgstr "в $-. О�тальные n аргументов -- позиционные параметры, и им, по"
+
+#~ msgid "parameters and are assigned, in order, to $1, $2, .. $n.  If no"
+#~ msgstr "пор�дку, при�ваивают�� значени� $1, $2, ..., $n. Е�ли аргументы"
+
+#~ msgid "ARGs are given, all shell variables are printed."
+#~ msgstr "не заданы, вывод�т�� в�е переменные оболочки."
+
+#~ msgid "For each NAME, remove the corresponding variable or function.  Given"
+#~ msgstr "Дл� каждого ИМЕ�И удал�ет �оответ�твующую переменную или функцию."
+
+#~ msgid "the `-v', unset will only act on variables.  Given the `-f' flag,"
+#~ msgstr ""
+#~ "Е�ли задано -v, unset вли�ет только на переменные, е�ли -f -- только"
+
+#~ msgid "unset will only act on functions.  With neither flag, unset first"
+#~ msgstr "на функции. Без флагов unset в первую очередь пытает�� удалить"
+
+#~ msgid "tries to unset a variable, and if that fails, then tries to unset a"
+#~ msgstr "переменную, е�ли �то не удаёт�� -- функцию. �екоторые переменные"
+
+#~ msgid ""
+#~ "function.  Some variables (such as PATH and IFS) cannot be unset; also"
+#~ msgstr "(такие как PATH и IFS) не могут быть удалены. См."
+
+#~ msgid "see readonly."
+#~ msgstr "также readonly."
+
+#~ msgid "NAMEs are marked for automatic export to the environment of"
+#~ msgstr "ИМЕ�� автоматиче�ки �к�портируют�� в �реду выполн�емых"
+
+#~ msgid "subsequently executed commands.  If the -f option is given,"
+#~ msgstr "впо�лед�твии команд. Е�ли задан параметр -f, ИМЕ��"
+
+#~ msgid "the NAMEs refer to functions.  If no NAMEs are given, or if `-p'"
+#~ msgstr "обозначают функции. Е�ли ИМЕ�а не заданы, или е�ли задано -p,"
+
+#~ msgid "is given, a list of all names that are exported in this shell is"
+#~ msgstr "выводит�� �пи�ок в�ех имён, �к�портированных в �ту оболочку."
+
+#~ msgid "printed.  An argument of `-n' says to remove the export property"
+#~ msgstr "�ргумент -n указывает убрать заданные имена из �пи�ка"
+
+#~ msgid "from subsequent NAMEs.  An argument of `--' disables further option"
+#~ msgstr "�к�портируемых.  �ргумент -- отключает дальнейшую обработку"
+
+#~ msgid "processing."
+#~ msgstr "параметров."
+
+#~ msgid ""
+#~ "The given NAMEs are marked readonly and the values of these NAMEs may"
+#~ msgstr ""
+#~ "Заданные ИМЕ�� помечают�� только дл� чтени�, и значени� �тих ИМ�� не"
+
+#~ msgid "not be changed by subsequent assignment.  If the -f option is given,"
+#~ msgstr ""
+#~ "могут измен�ть�� в по�ледующих при�ваивани�х. Е�ли задан параметр -f,"
+
+#~ msgid "then functions corresponding to the NAMEs are so marked.  If no"
+#~ msgstr "так помечают�� функции � �оответ�твующими ИМЕ��МИ. Е�ли аргументы"
+
+#~ msgid ""
+#~ "arguments are given, or if `-p' is given, a list of all readonly names"
+#~ msgstr "не заданы, или е�ли задано `-p', выводит�� �пи�ок имён только дл�"
+
+#~ msgid ""
+#~ "is printed.  An argument of `-n' says to remove the readonly property"
+#~ msgstr "чтени�.  �ргумент `-n' указывает �н�ть �вой�тво `только дл� чтени�'"
+
+#~ msgid "from subsequent NAMEs.  The `-a' option means to treat each NAME as"
+#~ msgstr "� указанных ИМ��. Параметр `-a' за�тавл�ет ра��матривать каждое ИМЯ"
+
+#~ msgid "an array variable.  An argument of `--' disables further option"
+#~ msgstr "как ма��ив.  �ргумент `--' прекращает дальнейшую обработку"
+
+#~ msgid ""
+#~ "The positional parameters from $N+1 ... are renamed to $1 ...  If N is"
+#~ msgstr ""
+#~ "Позиционные параметры начина� � $N+1 переобозначают�� как $1,... Е�ли"
+
+#~ msgid "not given, it is assumed to be 1."
+#~ msgstr "N не задано, оно предполагает�� равным 1."
+
+#~ msgid "Read and execute commands from FILENAME and return.  The pathnames"
+#~ msgstr "Читает и выполн�ет команды из файла � заданным именем и завершает"
+
+#~ msgid "in $PATH are used to find the directory containing FILENAME."
+#~ msgstr "работу. Файл ищет�� в каталогах, перечи�ленных в $PATH."
+
+#~ msgid "Suspend the execution of this shell until it receives a SIGCONT"
+#~ msgstr "Прио�танавливает работу оболочки до получени� �игнала"
+
+#~ msgid "signal.  The `-f' if specified says not to complain about this"
+#~ msgstr "SIGCONT.  `-f', е�ли задан, указывает прио�тановить работу, даже"
+
+#~ msgid "being a login shell if it is; just suspend anyway."
+#~ msgstr "е�ли �то оболочка �е��ии"
+
+#~ msgid "Exits with a status of 0 (trueness) or 1 (falseness) depending on"
+#~ msgstr "Завершает работу �о �тату�ом 0 (и�тина) или 1 (ложь) в зави�имо�ти"
+
+#~ msgid "the evaluation of EXPR.  Expressions may be unary or binary.  Unary"
+#~ msgstr "от значени� ВЫР�ЖЕ�ИЯ. Выражени� могут быть унарными или бинарными."
+
+#~ msgid "expressions are often used to examine the status of a file.  There"
+#~ msgstr "Унарные выражени� ча�то и�пользуют�� дл� проверки �о�то�ни� файла."
+
+#~ msgid "are string operators as well, and numeric comparison operators."
+#~ msgstr "Допу�тимы операции как �трокового, так и чи�ленного �равнени�."
+
+#~ msgid "File operators:"
+#~ msgstr "Файловые операции:"
+
+#~ msgid "    -b FILE        True if file is block special."
+#~ msgstr "    -b Ф�ЙЛ        И�тина, е�ли файл -- �пециальный блочный файл."
+
+#~ msgid "    -c FILE        True if file is character special."
+#~ msgstr ""
+#~ "    -c Ф�Йл        И�тина, е�ли файл -- �пециальный �имвольный файл."
+
+#~ msgid "    -d FILE        True if file is a directory."
+#~ msgstr "    -d Ф�ЙЛ        И�тина, е�ли файл -- каталог."
+
+#~ msgid "    -e FILE        True if file exists."
+#~ msgstr "    -e Ф�ЙЛ        И�тина, е�ли файл �уще�твует."
+
+#~ msgid "    -f FILE        True if file exists and is a regular file."
+#~ msgstr ""
+#~ "    -f Ф�ЙЛ        И�тина, е�ли файл �уще�твует и �вл�ет�� обычным файлом."
+
+#~ msgid "    -g FILE        True if file is set-group-id."
+#~ msgstr "    -g Ф�ЙЛ        И�тина, е�ли у файла у�тановлен атрибут SGID."
+
+#~ msgid "    -h FILE        True if file is a symbolic link.  Use \"-L\"."
+#~ msgstr ""
+#~ "    -h Ф�ЙЛ        И�тина, е�ли файл -- �имволиче�ка� ��ылка. И�пользуйте "
+#~ "\"-L\"."
+
+#~ msgid "    -L FILE        True if file is a symbolic link."
+#~ msgstr "    -L Ф�ЙЛ        И�тина, е�ли файл -- �имволиче�ка� ��ылка."
+
+#~ msgid "    -k FILE        True if file has its \"sticky\" bit set."
+#~ msgstr ""
+#~ "    -k Ф�ЙЛ        И�тина, е�ли у файла у�танолвен \"бит прив�зчиво�ти\"."
+
+#~ msgid "    -p FILE        True if file is a named pipe."
+#~ msgstr "    -p Ф�ЙЛ        И�тина, е�ли файл -- именованный канал."
+
+#~ msgid "    -r FILE        True if file is readable by you."
+#~ msgstr "    -r Ф�ЙЛ        И�тина, е�ли файл до�тупен вам дл� чтени�."
+
+#~ msgid "    -s FILE        True if file exists and is not empty."
+#~ msgstr "    -s Ф�ЙЛ        И�тина, е�ли файл �уще�твует и не пу�т."
+
+#~ msgid "    -S FILE        True if file is a socket."
+#~ msgstr "    -S Ф�ЙЛ        И�тина, е�ли файл -- �окет."
+
+#~ msgid "    -t FD          True if FD is opened on a terminal."
+#~ msgstr ""
+#~ "    -t FD          И�тина, е�ли файл � де�криптором FD �в�зан � "
+#~ "терминалом."
+
+#~ msgid "    -u FILE        True if the file is set-user-id."
+#~ msgstr "    -u Ф�ЙЛ        И�тина, е�ли у файла у�тановлен атрибут SUID."
+
+#~ msgid "    -w FILE        True if the file is writable by you."
+#~ msgstr "    -w Ф�ЙЛ        И�тина, е�ли файл до�тупен вам дл� запи�и"
+
+#~ msgid "    -x FILE        True if the file is executable by you."
+#~ msgstr "    -x Ф�ЙЛ        И�тина, е�ли файл до�тупен вам дл� выполнени�."
+
+#~ msgid "    -O FILE        True if the file is effectively owned by you."
+#~ msgstr "    -O Ф�ЙЛ        И�тина, е�ли вы -- �ффективный владелец файла."
+
+#~ msgid ""
+#~ "    -G FILE        True if the file is effectively owned by your group."
+#~ msgstr ""
+#~ "    -G Ф�ЙЛ        И�тина, е�ли ваша группа -- �ффективна� группа файла."
+
+#~ msgid "  FILE1 -nt FILE2  True if file1 is newer than (according to"
+#~ msgstr ""
+#~ "  Ф�ЙЛ1 -nt Ф�ЙЛ2  И�тина, е�ли файл1 более новый (по дате по�леднего"
+
+#~ msgid "                   modification date) file2."
+#~ msgstr "                   изменени�), чем файл2."
+
+#~ msgid "  FILE1 -ot FILE2  True if file1 is older than file2."
+#~ msgstr "  Ф�ЙЛ1 -ot Ф�ЙЛ2  И�тина, е�ли файл1 более �тарый, чем файл2."
+
+#~ msgid "  FILE1 -ef FILE2  True if file1 is a hard link to file2."
+#~ msgstr "  Ф�ЙЛ1 -ef Ф�ЙЛ2  И�тина, е�ли файл1 -- жё�тка� ��ылка на файл2."
+
+#~ msgid "String operators:"
+#~ msgstr "Строковые операции:"
+
+#~ msgid "    -z STRING      True if string is empty."
+#~ msgstr "    -z СТРОК�      И�тина, е�ли �трока пу�та."
+
+#~ msgid "    -n STRING"
+#~ msgstr "    -n СТРОК�"
+
+#~ msgid "    STRING         True if string is not empty."
+#~ msgstr "    СТРОК�         И�тина, е�ли �тркоа не пу�та."
+
+#~ msgid "    STRING1 = STRING2"
+#~ msgstr "    СТРОК�1 = СТРОК�2"
+
+#~ msgid "                   True if the strings are equal."
+#~ msgstr "                   И�тина, е�ли �троки равны."
+
+#~ msgid "    STRING1 != STRING2"
+#~ msgstr "    СТРОК�1 != СТРОК�2"
+
+#~ msgid "                   True if the strings are not equal."
+#~ msgstr "                   И�тина, е�ли �троки не равны."
+
+#~ msgid "    STRING1 < STRING2"
+#~ msgstr "    СТРОК�1 < СТРОК�2"
+
+#~ msgid ""
+#~ "                   True if STRING1 sorts before STRING2 lexicographically"
+#~ msgstr ""
+#~ "                   И�тина, е�ли СТРОК�1 лек�икографиче�ки �тоит раньше "
+#~ "СТРОКИ2"
+
+#~ msgid "    STRING1 > STRING2"
+#~ msgstr "    СТРОК�1 > СТРОК�2"
+
+#~ msgid ""
+#~ "                   True if STRING1 sorts after STRING2 lexicographically"
+#~ msgstr ""
+#~ "                   И�тина, е�ли СТРОК�1 лек�икографиче�ки �тоит позже "
+#~ "СТРОКИ2"
+
+#~ msgid "Other operators:"
+#~ msgstr "Прочие операции:"
+
+#~ msgid "    ! EXPR         True if expr is false."
+#~ msgstr "    ! ВЫР�ЖЕ�ИЕ    И�тина, е�ли выражение ложно."
+
+#~ msgid "    EXPR1 -a EXPR2 True if both expr1 AND expr2 are true."
+#~ msgstr "    ВЫР1 -a ВЫР2   И�тина, е�ли и�тинны оба выражени�."
+
+#~ msgid "    EXPR1 -o EXPR2 True if either expr1 OR expr2 is true."
+#~ msgstr "    ВЫР1 -o ВЫР2   И�тина, е�ли и�тинно хот� бы одно из выражений."
+
+#~ msgid "    arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,"
+#~ msgstr "    арг1 ОП арг2   �рифметиче�ка� проверка. ОП -- один из -eq, -ne,"
+
+#~ msgid "                   -lt, -le, -gt, or -ge."
+#~ msgstr "                   -lt, -le, -gt или -ge."
+
+#~ msgid "Arithmetic binary operators return true if ARG1 is equal, not-equal,"
+#~ msgstr ""
+#~ "Бинарные арифметиче�кие операции возвращают и�тину, е�ли �РГ1 равен,"
+
+#~ msgid ""
+#~ "less-than, less-than-or-equal, greater-than, or greater-than-or-equal"
+#~ msgstr "не равен, меньше, меньше или равен, больше или больше или равен"
+
+#~ msgid "than ARG2."
+#~ msgstr "�РГ2."
+
+#~ msgid "This is a synonym for the \"test\" builtin, but the last"
+#~ msgstr "Это �иноним в�троенной команды \"test\", но по�ледним аргументом"
+
+#~ msgid "argument must be a literal `]', to match the opening `['."
+#~ msgstr "должен быть литерал ']'. �оответ�твующий открывающей `['."
+
+#~ msgid "Print the accumulated user and system times for processes run from"
+#~ msgstr "Выве�ти пользователь�кое и �и�темное врем� работы проце��ов,"
+
+#~ msgid "the shell."
+#~ msgstr "запущенных из оболочки."
+
+#~ msgid "The command ARG is to be read and executed when the shell receives"
+#~ msgstr ""
+#~ "Команда �РГ должна быть прочитана и выполнена при получении оболочкой"
+
+#~ msgid "signal(s) SIGNAL_SPEC.  If ARG is absent all specified signals are"
+#~ msgstr ""
+#~ "указанного(ых) �игнала(ов). Е�ли �РГ не задан, в�е указанные �игналы"
+
+#~ msgid "reset to their original values.  If ARG is the null string each"
+#~ msgstr ""
+#~ "обрабатывают�� обработчиками по умолчанию. Е�ли �РГ -- пу�та� �трока,"
+
+#~ msgid "SIGNAL_SPEC is ignored by the shell and by the commands it invokes."
+#~ msgstr ""
+#~ "в�е указанные �игналы будут игнорировать�� оболочкой и вызываемыми ей"
+
+#~ msgid "If SIGNAL_SPEC is EXIT (0) the command ARG is executed on exit from"
+#~ msgstr "командами. Е�ли задан �игнал EXIT (0), команда �РГ выполн�ет�� при"
+
+#~ msgid "the shell.  If SIGNAL_SPEC is DEBUG, ARG is executed after every"
+#~ msgstr ""
+#~ "выходе из оболочки, е�ли DEBUG, �РГ выполн�ет�� при выполнении каждой"
+
+#~ msgid "command.  If ARG is `-p' then the trap commands associated with"
+#~ msgstr "команды. Е�ли �РГ -- `-p', вывод�т�� команды, �в�занные � заданными"
+
+#~ msgid "each SIGNAL_SPEC are displayed.  If no arguments are supplied or if"
+#~ msgstr "�игналами. Е�ли аргументы не заданы или е�ли задано только `-p',"
+
+#~ msgid "only `-p' is given, trap prints the list of commands associated with"
+#~ msgstr "trap выводит �пи�ок команд, �в�занных �о в�еми �игналами. Сигнал"
+
+#~ msgid ""
+#~ "each signal number.  SIGNAL_SPEC is either a signal name in <signal.h>"
+#~ msgstr "задаёт�� либо �воим именем в <signal.h>, либо номером. `trap -l'"
+
+#~ msgid ""
+#~ "or a signal number.  `trap -l' prints a list of signal names and their"
+#~ msgstr "выводит �пи�ок имён �игналов и �оответ�твующих им номеров."
+
+#~ msgid "corresponding numbers.  Note that a signal can be sent to the shell"
+#~ msgstr "Заметьте, что оболочке можно по�лать �игнал командой"
+
+#~ msgid "with \"kill -signal $$\"."
+#~ msgstr "\"kill -signal $$\"."
+
+#~ msgid "For each NAME, indicate how it would be interpreted if used as a"
+#~ msgstr "Дл� каждого ИМЕ�И определ�ет, как оно будет обрабатывать��"
+
+#~ msgid "If the -t option is used, returns a single word which is one of"
+#~ msgstr "Е�ли задан параметр -t, возвращает �лово -- `alias', `keyword',"
+
+#~ msgid ""
+#~ "`alias', `keyword', `function', `builtin', `file' or `', if NAME is an"
+#~ msgstr "`function', `builtin', `file' или `' -- е�ли, �оответ�твенно, ИМЯ"
+
+#~ msgid ""
+#~ "alias, shell reserved word, shell function, shell builtin, disk file,"
+#~ msgstr "�вл�ет�� п�евдокомандой, зарезервированным �ловом, функцией, или"
+
+#~ msgid "or unfound, respectively."
+#~ msgstr "в�троенной командой оболочки, ди�ковым файлом или не найдено."
+
+#~ msgid "If the -p flag is used, either returns the name of the disk file"
+#~ msgstr ""
+#~ "При и�пользовании флага -p либо возвращает�� им� выполн�емого ди�кового "
+#~ "файла,"
+
+#~ msgid "that would be executed, or nothing if -t would not return `file'."
+#~ msgstr "либо ничего, е�ли -t вернуло бы значение, отличное от  `file'"
+
+#~ msgid "If the -a flag is used, displays all of the places that contain an"
+#~ msgstr ""
+#~ "При и�пользовании флага -a выводит�� ра�положение в�ех и�полн�емых файлов"
+
+#~ msgid ""
+#~ "executable named `file'.  This includes aliases and functions, if and"
+#~ msgstr ""
+#~ "� указанным именем. Е�ли одновременно не и�пользует�� флаг -p и только"
+
+#~ msgid "only if the -p flag is not also used."
+#~ msgstr "тогда, вывод�т�� также п�евдокоманды и функции."
+
+#~ msgid "Type accepts -all, -path, and -type in place of -a, -p, and -t,"
+#~ msgstr "Вме�то -a, -p и -t можно и�пользовать, �оответ�твенно, -all,"
+
+#~ msgid "respectively."
+#~ msgstr "-path и -type."
+
+#~ msgid "Ulimit provides control over the resources available to processes"
+#~ msgstr "ulimit позвол�ет управл�ть ре�ур�ами, до�тупными запущенным"
+
+#~ msgid "started by the shell, on systems that allow such control.  If an"
+#~ msgstr "оболочкой проце��ам (на �и�темах, допу�кающих такое управление)."
+
+#~ msgid "option is given, it is interpreted as follows:"
+#~ msgstr "Параметры интерпретируют�� �ледующим образом:"
+
+#~ msgid "    -S\tuse the `soft' resource limit"
+#~ msgstr "    -S\tи�пользовать `м�гкое' ограничение ре�ур�ов"
+
+#~ msgid "    -H\tuse the `hard' resource limit"
+#~ msgstr "    -H\tи�пользовать `жё�ткое' ограничение ре�ур�ов"
+
+#~ msgid "    -a\tall current limits are reported"
+#~ msgstr "    -a\tвыве�ти информацию о в�ех текущих ограничени�х"
+
+#~ msgid "    -c\tthe maximum size of core files created"
+#~ msgstr "    -c\tмак�имальный размер �оздаваемых файлов �лепков пам�ти"
+
+#~ msgid "    -d\tthe maximum size of a process's data segment"
+#~ msgstr "    -d\tмак�имальный размер �егмента данных проце��а"
+
+#~ msgid "    -m\tthe maximum resident set size"
+#~ msgstr "    -m\tмак�имальный размер резидентной ча�ти проце��а"
+
+#~ msgid "    -s\tthe maximum stack size"
+#~ msgstr "    -s\tмак�имальный размер �тека"
+
+#~ msgid "    -t\tthe maximum amount of cpu time in seconds"
+#~ msgstr "    -t\tмак�имальное проце��орное врем� (в �екундах)"
+
+#~ msgid "    -f\tthe maximum size of files created by the shell"
+#~ msgstr "    -f\tмак�имальный размер �оздаваемых оболочкой файлов"
+
+#~ msgid "    -p\tthe pipe buffer size"
+#~ msgstr "    -p\tразмер буфера конвейера"
+
+#~ msgid "    -n\tthe maximum number of open file descriptors"
+#~ msgstr "    -n\tмак�имальное количе�тво открытых файловых дек�рипторов"
+
+#~ msgid "    -u\tthe maximum number of user processes"
+#~ msgstr "    -u\tмак�имальное чи�ло проце��ов одного пользовател�"
+
+#~ msgid "    -v\tthe size of virtual memory"
+#~ msgstr "    -v\tразмер виртуальной пам�ти"
+
+#~ msgid "If LIMIT is given, it is the new value of the specified resource."
+#~ msgstr ""
+#~ "Е�ли задано ОГР��ИЧЕ�ИЕ, оно задёт новое значение дл� указанного ре�ур�а."
+
+#~ msgid "Otherwise, the current value of the specified resource is printed."
+#~ msgstr ""
+#~ "В противном �лучае выводит�� текущее значение дл� указанного ре�ур�а."
+
+#~ msgid "If no option is given, then -f is assumed.  Values are in 1k"
+#~ msgstr "Е�ли параметры не заданы, предполагает��, что задано -f. Значени�"
+
+#~ msgid "increments, except for -t, which is in seconds, -p, which is in"
+#~ msgstr ""
+#~ "измер�ют�� в КБ, кроме -t, измер�емого в �екундах, -p, единица измерени�"
+
+#~ msgid "increments of 512 bytes, and -u, which is an unscaled number of"
+#~ msgstr "которого -- 512 байтов, и -u, задающего безразмерное чи�ло"
+
+#~ msgid "processes."
+#~ msgstr "проце��ов."
+
+#~ msgid ""
+#~ "The user file-creation mask is set to MODE.  If MODE is omitted, or if"
+#~ msgstr ""
+#~ "У�танавливает ма�ку �оздани� пользователем файлов в РЕЖИМ. Е�ли опущен"
+
+#~ msgid ""
+#~ "`-S' is supplied, the current value of the mask is printed.  The `-S'"
+#~ msgstr ""
+#~ "РЕЖИМ или задан параметр -S выводит�� текущее значение ма�ки. Параметр"
+
+#~ msgid ""
+#~ "option makes the output symbolic; otherwise an octal number is output."
+#~ msgstr "-S делает вывод �имволиче�ким, в противном �лучае и�пользует��"
+
+#~ msgid "If MODE begins with a digit, it is interpreted as an octal number,"
+#~ msgstr ""
+#~ "во�ьмеричое чи�ло. Е�ли РЕЖИм начинает�� � цифры, он интерпретирует��"
+
+#~ msgid ""
+#~ "otherwise it is a symbolic mode string like that accepted by chmod(1)."
+#~ msgstr ""
+#~ "как во�ьмеричное чи�ло, в противном �лучае как �трока, принимаема� "
+#~ "chmod(1)."
+
+#~ msgid ""
+#~ "Wait for the specified process and report its termination status.  If"
+#~ msgstr ""
+#~ "Подождать завершени� указанного проце��а и �ообщить код завершени�. Е�ли"
+
+#~ msgid "N is not given, all currently active child processes are waited for,"
+#~ msgstr ""
+#~ "N не задано, ожидает�� завершение работы в�ех активных дочерних проце��ов"
+
+#~ msgid "and the return code is zero.  N may be a process ID or a job"
+#~ msgstr "и код возврата равен 0. N может быть идентификатором проце��а"
+
+#~ msgid "specification; if a job spec is given, all processes in the job's"
+#~ msgstr ""
+#~ "или �пецификацией задачи, е�ли задана �пецификаци� задачи, ожидает��"
+
+#~ msgid "pipeline are waited for."
+#~ msgstr "завершение работы в�ех проце��ов конвейера задачи."
+
+#~ msgid "and the return code is zero.  N is a process ID; if it is not given,"
+#~ msgstr ""
+#~ "и код возврата равен 0. N -- идентификатор проце��а, е�ли он не задан,"
+
+#~ msgid "all child processes of the shell are waited for."
+#~ msgstr "ожидает�� завершение работы в�ех дочерних проце��ов оболочки."
+
+#~ msgid "The `for' loop executes a sequence of commands for each member in a"
+#~ msgstr "Цикл `for' выполн�ет по�ледовательно�ть команд дл� каждого члена"
+
+#~ msgid ""
+#~ "list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is"
+#~ msgstr ""
+#~ "�пи�ка. Е�ли от�ут�твует `in СЛОВ� ...;', предполагает��, что задано"
+
+#~ msgid ""
+#~ "assumed.  For each element in WORDS, NAME is set to that element, and"
+#~ msgstr "`in \"$@\"'. Дл� каждого из СЛОВ ИМЕ�И при�ваивает�� его значение"
+
+#~ msgid "the COMMANDS are executed."
+#~ msgstr "и затем выполн�ют�� КОМ��ДЫ."
+
+#~ msgid "The WORDS are expanded, generating a list of words.  The"
+#~ msgstr "СЛОВ� разворачивают�� и образуют �пи�ок �лов. Полученный �пи�ок"
+
+#~ msgid "set of expanded words is printed on the standard error, each"
+#~ msgstr ""
+#~ "выводит�� на �тандартный поток ошибок, каждому припи�ывает�� �переди"
+
+#~ msgid "preceded by a number.  If `in WORDS' is not present, `in \"$@\"'"
+#~ msgstr "чи�ло. Е�ли `in СЛОВ�' от�ут�твует, предполагает�� заданным"
+
+#~ msgid "is assumed.  The PS3 prompt is then displayed and a line read"
+#~ msgstr ""
+#~ "`in \"$@\"'. Затем выводит�� приглашение PS3 и �о �тандартного ввода"
+
+#~ msgid "from the standard input.  If the line consists of the number"
+#~ msgstr "�читывает�� �трока. Е�ли �трока �о�тоит из чи�ла, �оответ�твующего"
+
+#~ msgid "corresponding to one of the displayed words, then NAME is set"
+#~ msgstr "одному из выведенных �лов, ИМЯ у�танавливает�� равным �тому"
+
+#~ msgid "to that word.  If the line is empty, WORDS and the prompt are"
+#~ msgstr "�лову. Е�ли �трока пу�та, �лова и приглашение вывод�т�� ещё раз."
+
+#~ msgid "redisplayed.  If EOF is read, the command completes.  Any other"
+#~ msgstr "Е�ли прочитан �имвол конца файла, выполнение команды завершает��."
+
+#~ msgid "value read causes NAME to be set to null.  The line read is saved"
+#~ msgstr "любое другое значение у�танавливает ИМЯ в NULL. Прочитанна� �трока"
+
+#~ msgid "in the variable REPLY.  COMMANDS are executed after each selection"
+#~ msgstr "�охран�ет�� в переменной REPLY. По�ле каждого выбора выполн�ют��"
+
+#~ msgid "until a break or return command is executed."
+#~ msgstr ""
+#~ "КОМ��ДЫ до тех пор, пока не будет выполнена команда break или return."
+
+#~ msgid "Selectively execute COMMANDS based upon WORD matching PATTERN.  The"
+#~ msgstr ""
+#~ "Выполн�ет КОМ��ДЫ в зави�имо�ти от того, какому Ш�БЛО�У �оответ�твует"
+
+#~ msgid "`|' is used to separate multiple patterns."
+#~ msgstr ""
+#~ "СЛОВО. Дл� разделени� не�кольких допу�тимых шаблонов и�пользует�� `|'."
+
+#~ msgid ""
+#~ "The if COMMANDS are executed.  If the exit status is zero, then the then"
+#~ msgstr ""
+#~ "Выполн�ют�� КОМ��ДЫ, заданные в if. Е�ли код возврата нулевой, выполн�ют��"
+
+#~ msgid ""
+#~ "COMMANDS are executed.  Otherwise, each of the elif COMMANDS are executed"
+#~ msgstr "КОМ��ДЫ then, иначе по очереди выполн�ют�� КОМ��ДЫ elif, и е�ли код"
+
+#~ msgid ""
+#~ "in turn, and if the exit status is zero, the corresponding then COMMANDS"
+#~ msgstr ""
+#~ "возврата нулевой, выполн�ют�� �оответ�твующие КОМ��ДЫ then и выполнение"
+
+#~ msgid ""
+#~ "are executed and the if command completes.  Otherwise, the else COMMANDS"
+#~ msgstr ""
+#~ "команды if завершает��. В противном �лучае выполн�ют�� КОМ��ДЫ else,"
+
+#~ msgid ""
+#~ "are executed, if present.  The exit status is the exit status of the last"
+#~ msgstr "е�ли они при�ут�твуют. Код возврата равен коду возврата по�ледней"
+
+#~ msgid "command executed, or zero if no condition tested true."
+#~ msgstr ""
+#~ "выполненной команды, либо нулю, е�ли ни одно у�ловие не было и�тинным."
+
+#~ msgid "Expand and execute COMMANDS as long as the final command in the"
+#~ msgstr ""
+#~ "Разворачивает и выполн�ет КОМ��ДЫ до тех пор, пока по�ледн�� команда"
+
+#~ msgid "`while' COMMANDS has an exit status of zero."
+#~ msgstr "предложени� `while' не завершит работу � нулевым кодом возврата."
+
+#~ msgid "`until' COMMANDS has an exit status which is not zero."
+#~ msgstr "предложени� `until' не завершит работу � ненулевым кодом возврата."
+
+#~ msgid "Create a simple command invoked by NAME which runs COMMANDS."
+#~ msgstr "Создаёт про�тую команду, вызываемую по ИМЕ�И и выполн�ющую КОМ��ДЫ."
+
+#~ msgid "Arguments on the command line along with NAME are passed to the"
+#~ msgstr "�ргументы командной �троки, переданные ИМЕ�И, передают�� в функцию"
+
+#~ msgid "function as $0 .. $n."
+#~ msgstr "как $0 .. $n."
+
+#~ msgid "Run a set of commands in a group.  This is one way to redirect an"
+#~ msgstr "Выполн�ет набор команд. Это один из �по�обов о�уще�твить"
+
+#~ msgid "entire set of commands."
+#~ msgstr "перенаправление дл� целого набора команд."
+
+#~ msgid "This is similar to the `fg' command.  Resume a stopped or background"
+#~ msgstr ""
+#~ "Похоже на команду `fg'. Продолжает выполнение о�тановленной или фоновой"
+
+#~ msgid "job.  If you specifiy DIGITS, then that job is used.  If you specify"
+#~ msgstr ""
+#~ "задачи. Е�ли заданы ЦИФРЫ, и�польз�ет�� задача � �тим номером, а е�ли"
+
+#~ msgid ""
+#~ "WORD, then the job whose name begins with WORD is used.  Following the"
+#~ msgstr "СЛОВО -- задача, им� которой начинает�� � �того �лова. Завершение"
+
+#~ msgid "job specification with a `&' places the job in the background."
+#~ msgstr "�пецификации задачи �имволом & переводит задачу в фоновый режим."
+
+#~ msgid "BASH_VERSION    The version numbers of this Bash."
+#~ msgstr "BASH_VERSION    �омер вер�ии Bash."
+
+#~ msgid "CDPATH          A colon separated list of directories to search"
+#~ msgstr "CDPATH          Разделённый зап�тыми �пи�ок каталогов, где ищет��"
+
+#~ msgid "\t\twhen the argument to `cd' is not found in the current"
+#~ msgstr "\t\tаргумент команды `cd', е�ли он не найден в текущем"
+
+#~ msgid ""
+#~ "HISTFILE        The name of the file where your command history is stored."
+#~ msgstr "HISTFILE        Им� файла, где �охран�ет�� и�тори� команд."
+
+#~ msgid "HISTFILESIZE    The maximum number of lines this file can contain."
+#~ msgstr "HISTFILESIZE    Мак�имальное чи�ло �трок в �том файле."
+
+#~ msgid "HISTSIZE        The maximum number of history lines that a running"
+#~ msgstr "HISTSIZE        Мак�имальное чи�ло �трок и�тории команд, к которым"
+
+#~ msgid "\t\tshell can access."
+#~ msgstr "\t\tимеет до�туп оболочка."
+
+#~ msgid "HOME            The complete pathname to your login directory."
+#~ msgstr "HOME            Полный путь к домашнему каталогу."
+
+#~ msgid ""
+#~ "HOSTTYPE        The type of CPU this version of Bash is running under."
+#~ msgstr ""
+#~ "HOSTTYPE        Тип проце��ора, на котором работает �та вер�и� Bash."
+
+#~ msgid ""
+#~ "IGNOREEOF       Controls the action of the shell on receipt of an EOF"
+#~ msgstr ""
+#~ "IGNOREEOF       Управл�ет дей�тви�ми, �овершаемыми оболочкой при вводе"
+
+#~ msgid "\t\tcharacter as the sole input.  If set, then the value"
+#~ msgstr "\t\t�имвола конца файла. Е�ли у�тановлена, её значение -- чи�ло"
+
+#~ msgid "\t\tof it is the number of EOF characters that can be seen"
+#~ msgstr "\t\t�имволов конца файла, которые могут быть в�тречены подр�д,"
+
+#~ msgid "\t\tin a row on an empty line before the shell will exit"
+#~ msgstr "\t\tв пу�той �троке, по�ле чего оболочка завершит работу"
+
+#~ msgid "\t\t(default 10).  When unset, EOF signifies the end of input."
+#~ msgstr ""
+#~ "\t\t(по умолчанию 10). Е�ли не у�тановлена, EOF обозначает конец ввода."
+
+#~ msgid "MAILCHECK\tHow often, in seconds, Bash checks for new mail."
+#~ msgstr ""
+#~ "MAILCHECK\tКак ча�то, в �екундах, Bash провер�ет наличие новой почты."
+
+#~ msgid "MAILPATH\tA colon-separated list of filenames which Bash checks"
+#~ msgstr "MAILPATH\tРазделённый зап�тыми �пи�ок имён файлов, где Bash"
+
+#~ msgid "\t\tfor new mail."
+#~ msgstr "\t\tпровер�ет наличие новой почты."
+
+#~ msgid "OSTYPE\t\tThe version of Unix this version of Bash is running on."
+#~ msgstr "OSTYPE\t\tВер�и� Unix, под которой работает �та вер�и� Bash."
+
+#~ msgid "PATH            A colon-separated list of directories to search when"
+#~ msgstr "PATH            Разделённый зап�тыми �пи�ок каталогов, где ищут��"
+
+#~ msgid "\t\tlooking for commands."
+#~ msgstr "\t\tкоманды."
+
+#~ msgid "PROMPT_COMMAND  A command to be executed before the printing of each"
+#~ msgstr "PROMPT_COMMAND  Команда, выполн�ема� перед выводом каждого"
+
+#~ msgid "\t\tprimary prompt."
+#~ msgstr "\t\tпервичного приглашени�."
+
+#~ msgid "PS1             The primary prompt string."
+#~ msgstr "PS1             Строка первичного приглашени�."
+
+#~ msgid "PS2             The secondary prompt string."
+#~ msgstr "PS2             Строка вторичного приглашени�."
+
+#~ msgid "TERM            The name of the current terminal type."
+#~ msgstr "TERM            Им� типа текущего терминала."
+
+#~ msgid "auto_resume     Non-null means a command word appearing on a line by"
+#~ msgstr ""
+#~ "auto_resume     �енулевые значени� �лов команд, в�тречающие�� в �троке"
+
+#~ msgid "\t\titself is first looked for in the list of currently"
+#~ msgstr "\t\tотдельно, �начала ищут�� в �пи�ке о�тановленных"
+
+#~ msgid "\t\tstopped jobs.  If found there, that job is foregrounded."
+#~ msgstr "\t\tв данный момент задач. Е�ли найдено, задача активирует��."
+
+#~ msgid "\t\tA value of `exact' means that the command word must"
+#~ msgstr "\t\t`exact' значит, что команда должна в точно�ти"
+
+#~ msgid "\t\texactly match a command in the list of stopped jobs.  A"
+#~ msgstr "\t\t�оответ�твовать команде в �пи�ке о�тановленных задач."
+
+#~ msgid "\t\tvalue of `substring' means that the command word must"
+#~ msgstr "\t\t`substring' значит, что команда должна быть под�трокой"
+
+#~ msgid "\t\tmatch a substring of the job.  Any other value means that"
+#~ msgstr "\t\tзадачи. Любые другие значени� означают, что"
+
+#~ msgid "\t\tthe command must be a prefix of a stopped job."
+#~ msgstr "\t\tкоманда должна быть префик�ом о�тановленной задачи."
+
+#~ msgid "command_oriented_history"
+#~ msgstr "command_oriented_history"
+
+#~ msgid ""
+#~ "                Non-null means to save multiple-line commands together on"
+#~ msgstr ""
+#~ "                �енулевое значение означает, что много�трочные команды"
+
+#~ msgid "                a single history line."
+#~ msgstr "                будут �охран�ть�� в одной �троке и�тории."
+
+#~ msgid "histchars       Characters controlling history expansion and quick"
+#~ msgstr "histchars       Управл�ющие �имволы ра�ширени� и�тории и бы�трой"
+
+#~ msgid "\t\tsubstitution.  The first character is the history"
+#~ msgstr "\t\tпод�тановки. Первый �имвол -- �имвол под�тановки"
+
+#~ msgid "\t\tsubstitution character, usually `!'.  The second is"
+#~ msgstr "\t\tи�тории, обычно `!'. Второй -- �имвол `бы�трой"
+
+#~ msgid "\t\tthe `quick substitution' character, usually `^'.  The"
+#~ msgstr "\t\tпод�тановки', обычно `^'. Третий -- �имвол `комментари�"
+
+#~ msgid "\t\tthird is the `history comment' character, usually `#'."
+#~ msgstr "\t\tи�тории', обычно `#'."
+
+#~ msgid "HISTCONTROL\tSet to a value of `ignorespace', it means don't enter"
+#~ msgstr "HISTCONTROL\tЕ�ли равен `ignorespace', �то означает, что �троки,"
+
+#~ msgid "\t\tlines which begin with a space or tab on the history"
+#~ msgstr "\t\tначинающие�� � пробела или знака табул�ции, не попадают"
+
+#~ msgid "\t\tlist.  Set to a value of `ignoredups', it means don't"
+#~ msgstr "\t\tв и�торию. `ignoredups' означает, что �троки, �опадающие"
+
+#~ msgid "\t\tenter lines which match the last entered line.  Set to"
+#~ msgstr "\t\t� предыдущей, не попадают в и�торию. `ignoreboth' --"
+
+#~ msgid "\t\t`ignoreboth' means to combine the two options.  Unset,"
+#~ msgstr "\t\tодновременное дей�твие обоих параметров. Е�ли не"
+
+#~ msgid "\t\tor set to any other value than those above means to save"
+#~ msgstr "\t\tу�тановлено, или равно другому значению, то в и�торию"
+
+#~ msgid "\t\tall lines on the history list."
+#~ msgstr "\t\tкоманд попадают в�е �троки."
+
+#~ msgid "Adds a directory to the top of the directory stack, or rotates"
+#~ msgstr "Помещает каталог на вершину �тека каталогов или вращает"
+
+#~ msgid "the stack, making the new top of the stack the current working"
+#~ msgstr "�тек так, чтобы на вершине находил�� текущий каталог. Без"
+
+#~ msgid "directory.  With no arguments, exchanges the top two directories."
+#~ msgstr "аргументов мен�ет ме�тами два верхних каталога."
+
+#~ msgid "+N\tRotates the stack so that the Nth directory (counting"
+#~ msgstr "+N\tВращает �тек так, чтобы N-й каталог (�чита� � левой �тороны "
+
+#~ msgid "\tfrom the left of the list shown by `dirs') is at the top."
+#~ msgstr "\t�пи�ка, выводимого `dirs') оказал�� на вершине �тека."
+
+#~ msgid "-N\tRotates the stack so that the Nth directory (counting"
+#~ msgstr "-N\tВращает �тек так, чтобы N-й каталог (�чита� � правой"
+
+#~ msgid "\tfrom the right) is at the top."
+#~ msgstr "\t�тороны) оказал�� на вершине �тека."
+
+#~ msgid "-n\tsuppress the normal change of directory when adding directories"
+#~ msgstr "-n\tподавл�ет обычную �мену каталога при добавлении каталога"
+
+#~ msgid "\tto the stack, so only the stack is manipulated."
+#~ msgstr "\tв �тек, так что мен�ет�� только �одержимое �тека."
+
+#~ msgid "dir\tadds DIR to the directory stack at the top, making it the"
+#~ msgstr "dir\tпомещает DIR на вершину �тека и делает его новым"
+
+#~ msgid "You can see the directory stack with the `dirs' command."
+#~ msgstr "Про�матривать �тек каталогов можно командой `dirs'."
+
+#~ msgid "Removes entries from the directory stack.  With no arguments,"
+#~ msgstr "Удал�ет значени� из �тека каталогов. Без аргументов"
+
+#~ msgid "removes the top directory from the stack, and cd's to the new"
+#~ msgstr "удал�ет из �тека каталог на вершине и делает рабочим каталог,"
+
+#~ msgid "+N\tremoves the Nth entry counting from the left of the list"
+#~ msgstr "+N\tудал�ет N-й каталог, �чита� � левой �тороны �пи�ка,"
+
+#~ msgid "\tshown by `dirs', starting with zero.  For example: `popd +0'"
+#~ msgstr "\tвыводимого `dirs', начина� � нул�. �апример, `popd +0'"
+
+#~ msgid "\tremoves the first directory, `popd +1' the second."
+#~ msgstr "\tудал�ет первый каталог, `popd +1' -- второй."
+
+#~ msgid "-N\tremoves the Nth entry counting from the right of the list"
+#~ msgstr "-N\tудал�ет N-й каталог, �чита� � правой �тороны �пи�ка,"
+
+#~ msgid "\tshown by `dirs', starting with zero.  For example: `popd -0'"
+#~ msgstr "\tвыводимого `dirs', начина� � нул�. �апример, `popd -0'"
+
+#~ msgid "\tremoves the last directory, `popd -1' the next to last."
+#~ msgstr "\tудал�ет по�ледний каталог, `popd -1' -- предпо�ледний."
+
+#~ msgid ""
+#~ "-n\tsuppress the normal change of directory when removing directories"
+#~ msgstr "-n\tподавл�ет обычную �мену каталога при удалении каталогов из"
+
+#~ msgid "\tfrom the stack, so only the stack is manipulated."
+#~ msgstr "\t�тека, так что мен�ет�� только �одержимое �тека."
+
+#~ msgid "Display the list of currently remembered directories.  Directories"
+#~ msgstr "Выводит �пи�ок запомненных на данный момент каталогов. Каталоги"
+
+#~ msgid "find their way onto the list with the `pushd' command; you can get"
+#~ msgstr ""
+#~ "попадают в �пи�ок при и�пользовании команды `pushd', вы можете забрать"
+
+#~ msgid "back up through the list with the `popd' command."
+#~ msgstr "их из �пи�ка командой `popd'."
+
+#~ msgid ""
+#~ "The -l flag specifies that `dirs' should not print shorthand versions"
+#~ msgstr ""
+#~ "Флаг -l указывает, что `dirs' не должна выводит �окращённые варианты"
+
+#~ msgid ""
+#~ "of directories which are relative to your home directory.  This means"
+#~ msgstr "каталогов, заданных отно�ительно домашнего. Это означает, что"
+
+#~ msgid "that `~/bin' might be displayed as `/homes/bfox/bin'.  The -v flag"
+#~ msgstr "`~/bin' будет отображать�� как `/homes/bfox/bin'. Флаг -v"
+
+#~ msgid "causes `dirs' to print the directory stack with one entry per line,"
+#~ msgstr "за�тавл�ет `dirs' выводить каталоги по одному в �троке, предвар��"
+
+#~ msgid ""
+#~ "prepending the directory name with its position in the stack.  The -p"
+#~ msgstr ""
+#~ "им� каталога номером его позиции в �теке. Флаг -p делает то же �амое,"
+
+#~ msgid "flag does the same thing, but the stack position is not prepended."
+#~ msgstr "но не добавл�ют�� номера позиций. Флаг -c очищает �тек каталогов,"
+
+#~ msgid ""
+#~ "The -c flag clears the directory stack by deleting all of the elements."
+#~ msgstr "удал�� в�е его �лементы."
+
+#~ msgid ""
+#~ "+N\tdisplays the Nth entry counting from the left of the list shown by"
+#~ msgstr "+N\tвыводит N-й каталог, �чита� � левой �тороны �пи�ка, выводимого"
+
+#~ msgid "\tdirs when invoked without options, starting with zero."
+#~ msgstr "\tdirs при вызове без параметров, начина� � нул�."
+
+#~ msgid ""
+#~ "-N\tdisplays the Nth entry counting from the right of the list shown by"
+#~ msgstr "-N\tвыводит N-й каталог, �чита� � правой �тороны �пи�ка, выводимого"
+
+#~ msgid "Toggle the values of variables controlling optional behavior."
+#~ msgstr "Мен�ет значение переменных, управл�ющих поведением оболочки."
+
+#~ msgid "The -s flag means to enable (set) each OPTNAME; the -u flag"
+#~ msgstr "Флаг -s означает включить (у�тановить) каждое ИМЯ_П�Р�МЕТР�,"
+
+#~ msgid "unsets each OPTNAME.  The -q flag suppresses output; the exit"
+#~ msgstr "флаг -u �бра�ывает. Флаг -q подавл�ет вывод, у�тановлен или"
+
+#~ msgid "status indicates whether each OPTNAME is set or unset.  The -o"
+#~ msgstr "�брошен параметр определ�ет�� по коду возврата. Параметр -o"
+
+#~ msgid "option restricts the OPTNAMEs to those defined for use with"
+#~ msgstr "ограничивает работу параметрами, определёнными � помощью"
+
+#~ msgid "`set -o'.  With no options, or with the -p option, a list of all"
+#~ msgstr "`set -o'. Без параметров или при заданном параметре -p, выводит��"
+
+#~ msgid "settable options is displayed, with an indication of whether or"
+#~ msgstr "�пи�ок в�ех у�тановленных параметров и информаци�, у�тановлены"
+
+#~ msgid "not each is set."
+#~ msgstr "они или нет."
diff --git a/po/sk.gmo b/po/sk.gmo
new file mode 100644
index 0000000..c6c89c5
--- /dev/null
+++ b/po/sk.gmo
diff --git a/po/sk.po b/po/sk.po
new file mode 100644
index 0000000..f0b750f
--- /dev/null
+++ b/po/sk.po
@@ -0,0 +1,6505 @@
+# Slovak translation for bash.
+# Copyright (C) 2006 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+# Ivan Masár <helix84@centrum.sk>, 2007, 2008, 2009, 2010, 2011.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: bash 4.2\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2011-03-16 21:22+0100\n"
+"Last-Translator: Ivan Masár <helix84@centrum.sk>\n"
+"Language-Team: Slovak <sk-i18n@lists.linux.sk>\n"
+"Language: sk\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=utf-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "chybný index poľa"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr ""
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: nie je možné previesť indexované pole na asociatívne"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: neplatný kľú� asociatívneho poľa"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: nie je možné priradiť nenumerickému indexu"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr "%s: %s: pri prira�ovaní asociatívnemu poľu je potrebné použiť index"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: nie je možné vytvoriť: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr ""
+"bash_execute_unix_command: nie je možné nájsť klávesovú mapu pre príkaz"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: prvý znak (okrem bielych znakov) nie je „\"“"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "chýba zatvárajúca „%c“ v %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: chýba oddeľova� dvojbodka"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "„%s“: nie je možné zrušiť väzbu (unbind)"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr ""
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr ""
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr ""
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "„%s“: neplatný názov aliasu"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "úpravy riadka nie sú zapnuté"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "„%s“: neplatný názov klávesovej mapy"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: nie je možné pre�ítať: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "„%s“: neznámy názov funkcie"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s nie je zviazaný (bind) s žiadnymi klávesmi.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s je možné vyvolať ako "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "„%s“: nie je možné zrušiť väzbu (unbind)"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "po�et cyklov"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "dáva zmysel iba v cykle „for“, „while“ alebo „until“"
+
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Vrátiť kontext aktuálneho volania podprocedúry.\n"
+"    \n"
+"    Bez V�R, vráti „$line $filename“.  S V�R,\n"
+"    vráti „$line $subroutine $filename“; túto informáciu\n"
+"    je možné využiť pre trasovanie zásobníka.\n"
+"    \n"
+"    Hodnota V�R ur�uje o koľko rámcov volania sa vrátiť\n"
+"    pred aktuálny; najvyšší rámec má �íslo 0.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak shell nevykonáva funkciu shellu a EXPR nie je neplatný."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "HOME nebola nastavená"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "príliš veľa argumentov"
+
+#: builtins/cd.def:342
+#, fuzzy
+msgid "null directory"
+msgstr "na nový vrchol zásobníka."
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "OLDPWD nebola nastavená"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "riadok %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "upozornenie: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: použitie "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: voľba vyžaduje argument"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: vyžaduje sa numerický argument"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: nenájdené"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: neplatná voľba"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: neplatný názov voľby"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "„%s“: nie je platný identifikátor"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "neplatné osmi�kové �íslo"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "neplatné šestnástkové �íslo"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "neplatné �íslo"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: neplatné ur�enie signálu"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "„%s“: nie je pid ani platný špecifikátor úlohy"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: premenná len na �ítanie"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s je mimo rozsahu"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "argument"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s mimo rozsahu"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: taká úloha neexistuje"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: riadenie úloh nedostupné"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "riadenie úloh nedostupné"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: obmedzené"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "obmedzené"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: nie je vstavaný príkaz (builtin) shellu"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "chyba zapisovania: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "chyba pri nastavovaní atribútov terminálu: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "chyba pri zisťovaní atribútov terminálu: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: chyba pri zisťovaní aktuálneho adresára: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: nejednozna�né ur�enie úlohy"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr ""
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: nie je možné zrušiť: len na �ítanie %s"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: nie je možné zrušiť"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: neplatný názov akcie"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: chýba špecifikácia dokon�ovania"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "upozornenie: voľba -F nemusí fungovať tak ako o�akávate"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "upozornenie: voľba -C nemusí fungovať tak ako o�akávate"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "momentálne sa nevykonáva funkcia doplňovania"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "je možné použiť iba vo funkcii"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr ""
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr ""
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr ""
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, fuzzy, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "„%s“: neplatný názov aliasu"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "nie je možné použiť „-f“ pre tvorbu funkcií"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: funkcia iba na �ítanie"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr ""
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: nie je možné takto robiť deštrukciu premenných polí"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: nie je možné previesť asociatívne pole na indexované"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "dynamické na�ítavanie nie je dostupné"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "nie je možné otvoriť zdieľaný objekt %s: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "nemožem nájsť %s v zdieľanom objekte %s: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: nie je dynamicky na�ítané"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr ""
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: nie je dynamicky na�ítané"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: nie je možné zmazať: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: je adresár"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: nie je oby�ajný súbor"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: súbor je príliš veľký"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: nie je možné vykonať binárny súbor"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: nie je možné spustiť: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "odhlásenie\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "toto nie je login shell: použite „exit“"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Existujú zastavené úlohy.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Existujú bežiace úlohy.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "prákaz nenájdený"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "špecifikácia histórie"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: nie je možné otvoriť odkladací súbor: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "aktuálny"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "úloha %d za�ala bez riadenia úloh"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: neplatná voľba -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: voľba vyžaduje argument -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "hašovanie vypnuté"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: hašovacia tabuľka je prázdna\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "použití\tpríkaz\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Príkazy shellu zodpovedajúce kľú�ovému slovu „"
+msgstr[1] "Príkazy shellu zodpovedajúce kľú�ovým slovám „"
+msgstr[2] "Príkazy shellu zodpovedajúce kľú�ovým slovám „"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"pre „%s“ neboli nájdené zodpovedajúce témy pomocníka.\n"
+"Skúste „help help“ alebo „man -k %s“ alebo „info %s“."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: nie je možné otvoriť: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Tieto príkazy shellu sú definované interne. Napísaním „help“ zobrazíte tento "
+"zoznam.\n"
+"Napísaním „help názov“ zistíte viac o funkcii „názov“.\n"
+"Napísaním „info bash“ zistíte viac o shelli vo všeobecnosti.\n"
+"Napísaním „man -k“ alebo „info“ zistíte viac príkazoch, ktoré nie sú v "
+"zozname.\n"
+"\n"
+"Hviezdi�ka (*) vedľa názvu znamená, že príkaz je vypnutý.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "nie je možné použiť viac ako jednu z volieb -anrw"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "poloha histórie"
+
+#: builtins/history.def:340
+#, fuzzy, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: neplatný názov voľby"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: rozšírenie histórie zlyhalo"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: inlib zlyhalo"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "iné voľby prípustné s „-x“"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: argumenty musia byť ID procesov alebo úloh"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Neznáma chyba"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "o�akával sa výraz"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: nie je indexované pole"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: neplatná špecifikácia popisova�a súboru"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: neplatný popisova� súboru: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: neplatný po�et riadkov"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: neplatný za�iatok poľa"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: neplatné kvantum spätného volania"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "názov prázdnej premennej poľa"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "vyžaduje sa podpora premennej poľa"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "„%s“: chýba formátovací znak"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "„%c“: neplatná špecifikácia formátu �asu"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "„%c“: neplatný formátovací znak"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "upozornenie: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr ""
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "chýba hexadecimálna �íslica v \\x"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "chýba �íslica Unicode pre \\%c"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "žiadny iný adresár"
+
+#: builtins/pushd.def:360
+#, fuzzy, c-format
+msgid "%s: invalid argument"
+msgstr "%s: neplatný argument limitu"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<žiadny aktuálny adresár>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "zásobník adresárov je prázdny"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "index zásobníka adresárov"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Zobrazí zoznam momentálne zapamätaných adresárov. Adresáre\n"
+"    sa do zoznamu dostávajú príkazom „pushd“; zo zoznamu ich môžete\n"
+"    vyberať postupne príkazom „popd“.\n"
+"    \n"
+"    Voľby:\n"
+"      -c\tvyprázdni zásobník adresárov zmazaním všetkých položiek\n"
+"      -l\tnevypisovať skrátené verzie adresárov relatívne vzhľadom\n"
+"    \tna váš domovský adresár\n"
+"      -p\tvypíše zásobník adresárov vo formáte jedna položka na riadok\n"
+"      -v\tvypíše zásobník adresárov vo formáte jedna položka na riadok\n"
+"    \ta pred ňu vypíše jej pozíciu na zásobníku\n"
+"    \n"
+"    Argumenty:\n"
+"    +N\tzobrazuje N-tú položku po�ítajúc zľava zoznamu, ktorý zobrazuje\n"
+"    \tdirs vyvolaný bez volieb, po�ínajúc nulou.\n"
+"    \n"
+"    -N\tzobrazuje N-tú položku po�ítajúc sprava zoznamu, ktorý zobrazuje\n"
+"    \tdirs vyvolaný bez volieb, po�ínajúc nulou."
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Pridá adresár na vrchol zásobníka adresárov alebo ho oto�í tak, že\n"
+"    nový vrchol zásobníka sa stane aktuálnym pracovným adresárom.\n"
+"    Bez argumentov vymení vrchné dva adresáre.\n"
+"    \n"
+"    Voľby:\n"
+"    -n\tPotla�í normálnu zmenu adresára pri odstraňovaní položiek\n"
+"    \tzo zásobníka, takže sa zmení iba zásobník.\n"
+"    \n"
+"    Argumenty:\n"
+"    +N\tOto�í zásobník tak, že N-tý adresár (po�ítajúc zľava zoznamu,\n"
+"    \tktorý zobrazuje „dirs“, po�ínajúc nulou) je na vrchu.\n"
+"    \n"
+"    -N\tOto�í zásobník tak, že N-tý adresár (po�ítajúc sprava zoznamu,\n"
+"    \tktorý zobrazuje „dirs“, po�ínajúc nulou) je na vrchu.\n"
+"    \n"
+"    adr\tPridá ADR na vrchol zásobníka adresárov, �ím sa tento stane\n"
+"    \tnovým aktuálnym pracovným adresárom.\n"
+"    \n"
+"    Zásobník adresárov môžete zobraziť vstavaným príkazom „dirs“."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Odstráni položky zo zásobníka adresárov. Bez argumentov odstráni\n"
+"    vrchnú položku zo zásobníka a zmení adresár na adresár, ktorý\n"
+"    sa následne nachádza na vrchu zásobníka.\n"
+"    \n"
+"    Voľby:\n"
+"    -n\tpotla�í normálnu zmenu adresára pri odstraňovaní položiek\n"
+"    \tzo zásobníka, takže sa zmení iba zásobník.\n"
+"    \n"
+"    Argumenty:\n"
+"    +N\todstráni N-tú položku položku po�ítajúc zľava zoznamu,\n"
+"    \tktorý zobrazuje „dirs“, po�ínajúc nulou. Napríklad: „popd +0“\n"
+"    \todstráni prvý adresár, „popd +1“ druhý.\n"
+"    \n"
+"    -N\todstráni N-tú položku položku po�ítajúc sprava zoznamu,\n"
+"    \tktorý zobrazuje „dirs“, po�ínajúc nulou. Napríklad: „popd -0“\n"
+"    \todstráni posledný adresár, „popd -1“ predposledný.\n"
+"    \n"
+"    Zásobník adresárov môžete zobraziť vstavaným príkazom „dirs“."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: neplatná špecifikácia expirácie (timeout)"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "chyba pri �ítaní: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr ""
+"návrat („return“) je možné vykonať iba z funkcie alebo skriptu vyvolaného "
+"pomocou „source“"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "nie je možné zároveň zrušiť funkciu a premennú"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: nie je premenná poľa"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: nie je funkcia"
+
+#: builtins/setattr.def:194
+#, fuzzy, c-format
+msgid "%s: cannot export"
+msgstr "%s: nie je možné zrušiť"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "posun o"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "nie je možné zároveň nastaviť aj zrušiť voľby shellu"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: neplatný názov voľby shellu"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "vyžaduje sa argument názov súboru"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: súbor sa nepodarilo nájsť"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "nie je možné suspendovať"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "nie je možné suspendovať login shell"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s má alias „%s“\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s je kľú�ové slovo shellu\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s je funkcia\n"
+
+#: builtins/type.def:299
+#, fuzzy, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s je vstavaný príkaz (builtin) shellu\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s je vstavaný príkaz (builtin) shellu\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s je %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s je hašovaný (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: neplatný argument limitu"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "„%c“: chybný príkaz"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: nie je možné zistiť limit: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "obmedzenie"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: nie je možné zmeniť limit: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "osmi�kové �íslo"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "„%c“: neplatný operátor symbolického režimu"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "„%c“: neplatný znak symbolického režimu"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " riadok "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "posledný príkaz: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Ruší sa..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr ""
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "chyba neznámeho príkazu"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "chybný typ príkazu"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "chybný konektor"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "chybný skok"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: neviazaná premenná"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\a�as vypršal pri �akaní na vstup: automatické odhlásenie\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "nie je možné presmerovať štandardný vstup z /dev/null: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "TIMEFORMAT: „%c“: neplatný formátovácí znak"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr ""
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "chyba rúry"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: obmedzené: nie jemožné uviesť „/“ v názvoch príkazov"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: príkaz nenájdený"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: chybný interpreter"
+
+#: execute_cmd.c:5891
+#, fuzzy, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: nie je možné vykonať binárny súbor"
+
+#: execute_cmd.c:5977
+#, fuzzy, c-format
+msgid "`%s': is a special builtin"
+msgstr "%s je vstavaný príkaz (builtin) shellu\n"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "nie je možné duplikovať fd %d na fd %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "bola prekro�ená úroveň rekurzie výrazu"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "podte�enie zásobníka rekurzie"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "chyba syntaxe vo výraze"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "pokus o priradenie mimo premennej"
+
+#: expr.c:530
+#, fuzzy
+msgid "syntax error in variable assignment"
+msgstr "chyba syntaxe vo výraze"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "delenie nulou"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "chyba: chybný expassign token"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "pre podmienený výraz sa o�akáva „:“"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "exponent menší ako 0"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "po pre-inkrementácii alebo pre-dekrementácii sa o�akáva identifikátor"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "chýba „)“"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "chyba syntaxe: o�akáva sa operand"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "chyba syntaxe: neplatný aritmetický operátor"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (chybný token je „%s�)"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "neplatný aritmetický základ"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: neplatný po�et riadkov"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "hodnota je ako základ príliš veľká"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: chyba výrazu\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: nie je možné pristupovať k rodi�ovským adresárom"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "nie j emožné resetovať nodelay režim fd %d"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr "nie je možné alokovať nový popisova� súboru pre vstup bashu z fd %d"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input: bufer už existuje pre nový fd %d"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: pgrp rúra"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "pid %d získaný pomocou fork sa vyskytuje v bežiacej úlohe %d"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "mažem zastavenú úlohu %d so skupinou procesu %ld"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process: pid %5ld (%s) je stále ozna�ený ako živý"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: taký pid neexistuje"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Signál %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Hotovo"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Zastavené"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Zastavené(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "Beží"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Hotovo(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Ukon�enie %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Neznámy stav"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(bol uložený výpis pamäte) "
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (wd: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "setpgid detského procesu (%ld to %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: pid %ld nie je dieťa tohto shellu"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: Neexistuje záznam o procese %ld"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: úloha %d je zastavená"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: taká úloha neexistuje"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: úloha skon�ila"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: úloha %d už je v pozadí"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr "waitchld: zapína sa WNOHANG aby sme sa vyhli neur�itému blokovaniu"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: riadok %d: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (bol uložený výpis pamäte)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(wd teraz: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: funkcia getpgrp zlyhala"
+
+#: jobs.c:4447
+#, fuzzy
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: riadkový systém"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: riadkový systém"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "nie je možné nastaviť skupinu procesu terminálu (%d)"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "v tomto shelli nie je riadenie úloh"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: zlyhal predpoklad: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d: zbabraný predpoklad\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "neznámy"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: blok na zozname voľných zaprataný"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: zavolaný s argumentom už uvoľneného bloku"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: zavolaný s argumentom nealokovaného bloku"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: bolo detekované podte�enie; mh_nbytes mimo rozsahu"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: bolo detekované podte�enie; mh_nbytes mimo rozsahu"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: veľkosti za�iato�ného a kone�ného bloku (chunk) sa líšia"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: zavolaný s argumentom nealokovaného bloku"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc: bolo detekované podte�enie; mh_nbytes mimo rozsahu"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc: bolo detekované podte�enie; mh_nbytes mimo rozsahu"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: veľkosti za�iato�ného a kone�ného bloku (chunk) sa líšia"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: alok. tabuľla je plná s FIND_ALLOC?\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: %p už je v tabuľke ako alokovaný?\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: %p už je v tabuľke ako voľný?\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "neplatný základ"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: hostiteľ neznámy"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: neplatná služba"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: chybná špecifikácia sieťovej cesty"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "sieťové operácie nie sú podporované"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: nemožno zmeniť locale (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: nemožno zmeniť locale (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: nie je možné zmeniť locale (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: nie je možné zmeniť locale (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "Máte poštu v súbore $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "Máte novú poštu v súbore $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "Pošta v súbore %s bola pre�ítaná\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "chyba syntaxe: vyžaduje sa aritmetický výraz"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "chyba syntaxe: neo�akávaná „;“"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "chyba syntaxe: „((%s))“"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: chybný typ inštrukcie %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr ""
+"here-document na riadku %d oddelený znakom konca riadku (o�akávalo sa „%s�)"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr "make_redirection: inštrukcia presmerovania „%d“ mimo rozsahu"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr ""
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "neo�akávaný koniec súboru po�as hľadania zodpovedajúceho „%c“"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "neo�akávaný koniec súboru po�as hľadania „]]“"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "chyba syntaxe v podmiene�nom príkaze: neo�akávaný token „%s“"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "chyba syntaxe v podmiene�nom príkaze"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "neo�akávaný token „%s“, o�akávalo sa `)'"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "o�akávalo sa `)'"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "neo�akávaný argument „%s“ podmiene�ného unárneho operátora"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "neo�akávaný argument podmiene�ného unárneho operátora"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "neo�akávaný token „%s“, o�akáva sa podmiene�ný binárny operátor"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "o�akáva sa podmiene�ný binárny operátor"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "neo�akávaný argument „%s“ v podmiene�nom binárnom operátore"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "neo�akávaný argument v podmiene�nom binárnom operátore"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "neo�akávaný token „%c“ v podmiene�nom príkaze"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "neo�akávaný token „%s“ v podmiene�nom príkaze"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "neo�akávaný token %d v podmiene�nom príkaze"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "chyba syntaxe ne�aleko neo�akávaného tokenu „%s“"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "chyba syntaxe ne�aleko „%s“"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "chyba syntaxe: neo�akávaný koniec súboru"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "chyba syntaxe"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Na opustenie shellu použite „%s“.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "neo�akávaný koniec súboru po�as hľadania zodpovedajúceho „)“"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "dokon�ovanie: funkcia „%s“ nebola nájdená"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr ""
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: NULL COMPSPEC"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: chybný konektor `%d'"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: neplatný popisova� súboru"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: ukazovateľ súboru je NULL"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != fileno xtrace fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: „%c“: neplatný formátovací znak"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "popisova� súboru mimo rozsahu"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: nejednozna�né presmerovanie"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: nie je možné prepísať existujúci súbor"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: ombedzené: nie je možné presmerovať výstup"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "nie je možné vytvoriť odkladací súbor pre here-document: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: nie je možné priradiť popisova� súboru premennej"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "/dev/(tcp|udp)/host/port nie je podporovaný bez podpory sietí"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "chyba presmerovania: nie je možné duplikovať fd"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "nenašiel sa /tmp, vytvorte ho prosím!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp musí byť platný názov adresára"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr ""
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: neplatná voľba"
+
+#: shell.c:1319
+#, fuzzy, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "nie j emožné resetovať nodelay režim fd %d"
+
+#: shell.c:1330
+#, fuzzy, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "nie j emožné resetovať nodelay režim fd %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr ""
+
+#: shell.c:1632
+#, fuzzy, c-format
+msgid "%s: Is a directory"
+msgstr "%s: je adresár"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "Nemám meno!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, verzia %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Použitie:\t%s [GNU dlhá voľba] [voľba] ...\n"
+"\t%s [GNU dlhá voľba] [voľba] súbor-skriptu ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "GNU dlhé voľby:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Voľby shellu:\n"
+
+#: shell.c:2043
+#, fuzzy
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-irsD alebo -c príkaz alebo -O krátka_voľba\t\t(iba vyvolanie)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s alebo -o voľba\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+"Napísaním „%s -c \"help set\"“ získate viac informácií o voľbách shellu.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr ""
+"Napísaním „%s -c help“ získate viac informácií o vstavaných príkazoch "
+"(builtins) shellu.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "Na ohlasovanie chýb použite príkaz „bashbug“.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr ""
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr ""
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: neplatná operácia"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Neplatný signál"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Zavesenie"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Prerušenie"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Ukon�enie"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Neplatná inštrukcia"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "BPT trace/trap"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "inštrukcia ABORT"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "inštrukcia EMT"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Výnimka pri operácii s plávajúcou desatinnou �iarkou"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Zabitý"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "chyba zbernice"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Chyba segmentácie"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Chybné systémové volanie"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Prerušená rúra"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Budík"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Ukon�ené"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Naliehavý stav V/V"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Zastavené (signál)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Pokra�ovať"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Zastavenie alebo zabitie detského procesu"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Zastavené (vstup z tty)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Zastavené (výstup na tty)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "V/V pripravený"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "obmedzenie CPU"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "obmedzenie súborov"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Budík (virtuálny)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Budík (profil)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Okno sa zmenilo"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Zámok záznamu"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Používateľský signál 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Používateľský signál 2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "�aká sa na vstupné údaje HFT"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "nastane výpadok napájania"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "nastane havária systému"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "presunúť proces na iný CPU"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "chyba programovania"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "udelený režim monitoru HFT"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "stiahnutý režim monitoru HFT"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "dokon�ila sa zvuková sekvencia HFT"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "Žiadosť o informácie"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "Neznámy signál #%d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "chybná substitúcia: chýba „%s“ v %s"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: nie je možné priradiť zoznam položke poľa"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "nie je možné vytvoriť rúru pre substitúciu procesov"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "nie je možné vytvoriť potomka pre substitúciu procesov"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "nie je možné otvoriť pomenovanú rúru %s na �ítanie"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "nie je možné otvoriť pomenovanú rúru %s na zápis"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "nie je možné duplikovať pomenovanú rúru %s ako fd %d"
+
+#: subst.c:6213
+#, fuzzy
+msgid "command substitution: ignored null byte in input"
+msgstr "chybná substitúcia: : v reťazci %s chýba uzatvárajúci „`�"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "nie je možné vytvoriť rúru pre substitúciu príkazov"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "nie je možné vytvoriť potomka pre substitúciu príkazov"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute: nie je možné duplikovať rúru ako fd 1"
+
+#: subst.c:6883 subst.c:9952
+#, fuzzy, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: %s: neplatná hodnota popisova�a trasovacieho súboru"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, fuzzy, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: neplatný po�et riadkov"
+
+#: subst.c:7013 subst.c:7177
+#, fuzzy, c-format
+msgid "%s: invalid variable name"
+msgstr "„%s“: neplatný názov aliasu"
+
+#: subst.c:7256
+#, fuzzy, c-format
+msgid "%s: parameter not set"
+msgstr "%s: parameter je null alebo nenastavený"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: parameter je null alebo nenastavený"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: výraz podreťazca < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: chybná substitúcia"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: nie je možné vykonať priradenie takýmto spôsobom"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+"budúce verzie shellu budú vynucovať vyhodnocovanie ako aritmetickú "
+"substitúciu"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "chybná substitúcia: : v reťazci %s chýba uzatvárajúci „`�"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "bez zhody: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "o�akával sa argument"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: o�akával sa celo�íselný výraz"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "o�akávala sa „)“"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "o�akávala sa „)“, bolo nájdené %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: o�akával sa binárny operátor"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: o�akával sa unárny operátor"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "chýba „]“"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "chyba syntaxe: neo�akávaná „;“"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "neplatné �íslo signálu"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr ""
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: chybná hodnota v trap_list[%d]: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps: obsluha signálu je SIG_DFL, znovu posielam %d (%s) sebe"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: chybný signál %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "chyba pri importe definície funkcie „%s“"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "úroveň shellu (%d) je príliš vysoká, nastavujem späť na 1"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: v aktuálnom rozsahu sa nenachádza kontext funkcie"
+
+#: variables.c:2693
+#, fuzzy, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: nie je možné priradiť popisova� súboru premennej"
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr ""
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: v aktuálnom rozsahu sa nenachádza kontext funkcie"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s má null exportstr"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "neplatný znak %d v exportstr %s"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "žiadne „=“ v exportstr %s"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr "pop_var_context: hlavi�ka shell_variables nie je kontext funkcie"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: chýba kontext global_variables"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr "pop_scope: hlavi�ka shell_variables nie je do�asný rozsah prostredia"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: nemožno otvoriť ako SÚBOR"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: neplatná hodnota popisova�a trasovacieho súboru"
+
+#: variables.c:6437
+#, fuzzy, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s je mimo rozsahu"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Copyright (C) 2009 Free Software Foundation, Inc.\n"
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"Licencia GPLv3+: GNU GPL verzie 3 alebo novšia http://gnu.org/licenses/gpl."
+"html\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, verzia %s (%s)\n"
+
+#: version.c:91 version2.c:91
+#, fuzzy
+msgid "This is free software; you are free to change and redistribute it."
+msgstr "Toto je slobodný softvér; môžete ho slobodne meniť a šíriť.\n"
+
+#: version.c:92 version2.c:92
+#, fuzzy
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr ""
+"Nie sú poskytované ŽIADNE Z�RUKY v rozsahu aký povoľuje\n"
+"aplikovateľné právo.\n"
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: nie je možné alokovať %lu bajtov (%lu bajtov alokovaných)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: nie je možné alokovať %lu bajtov"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: nie je možné alokovať %lu bajtov (%lu bajtov alokovaných)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: nie je možné alokovať %lu bajtov"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [názov[=hodnota] ... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] názov [názov ...]"
+
+#: builtins.c:53
+#, fuzzy
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpvsPVS] [-m kláv_mapa] [-f názov_súboru] [-q názov] [-u názov] [-r "
+"postup_kláv] [-x postup_kláv:príkaz_shellu] [postup_kláv:funkcia_readline "
+"alebo príkaz-readline]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [vstavaná funcia shellu [arg ...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [výraz]"
+
+#: builtins.c:66
+#, fuzzy
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]]] [adresár]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] command [arg ...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilrtux] [-p] [názov[=hodnota] ...]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilrtux] [-p] name[=value] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [voľba] názov[=hodnota] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [arg ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [arg ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f názov_súboru] [názov ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [arg ...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts názov_reťazca_volieb [arg]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a názov] [príkaz [argumenty ...]] [presmerovanie ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr ""
+"fc [-e enázov] [-lnr] [prvý] [posledný] alebo fc -s [vzor=opak] [príkaz]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [špec_úlohy]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [špec_úlohy ...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p cesta] [-dt] [názov ...]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [vzor ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d ofset] [n] alebo history -anrw [názov_súboru] alebo history "
+"-ps arg [arg...]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [špec_úlohy ...] alebo jobs -x príkaz [argumenty]"
+
+#: builtins.c:131
+#, fuzzy
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [špec_úlohy ...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s špec_signálu | -n �íslo_signálu | -špec_signálu] pid | "
+"špec_úlohy ... alebo kill -l [špec_signálu]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let arg [arg ...]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a pole] [-d oddeľova�] [-i text] [-n nznakov] [-N nznakov] [-p "
+"výzva] [-t zdržadnie] [-u fd] [názov ...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o názov_voľby] [arg ...]"
+
+#: builtins.c:144
+#, fuzzy
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [názov ...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [názov[=hodnota] ...] alebo export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [názov[=hodnota] ...] alebo readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source názov_súboru [argumenty]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". názov_súboru [argumenty]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [výraz]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ arg... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[arg] špec_signálu ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] názov [názov ...]"
+
+#: builtins.c:171
+#, fuzzy
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHacdefilmnpqrstuvx] [obmedzenie]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [režim]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [id]"
+
+#: builtins.c:181
+#, fuzzy
+msgid "wait [pid ...]"
+msgstr "wait [pid]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for NAME [in SLOV� ... ] ; do PR�KAZY; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( výraz1; výraz2; výraz3 )); do PR�KAZY; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select N�ZOV [in SLOV� ... ;] do PR�KAZY; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] rúra"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case SLOVO in [VZOR [| VZOR]...) PR�KAZY ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if PR�KAZY; then PR�KAZY; [ elif PR�KAZY; then PR�KAZY; ]... [ else "
+"PR�KAZY; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while PR�KAZY; do PR�KAZY; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until PR�KAZY; do PR�KAZY; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [N�ZOV] príkaz [presmerovania]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr ""
+"function názov_funkcie { PR�KAZY ; } alebo názov_funkcie () { PR�KAZY ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ PR�KAZY ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "špec_úlohy [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( výraz ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ výraz ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "premenné - Názvy a významy niektorých premenných shellu"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | adr]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [názov_voľby ...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v var] formát [argumenty]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DE] [-o voľba] [-A operácia] [-G glob_vzor] "
+"[-W zoznam_slov] [-F funkcia] [-C príkaz] [-X vzor_filtra] [-P predpona] [-S "
+"prípona] [názov ...]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o voľba]  [-A operácia] [-G glob_vzor] [-W "
+"zoznam_slov]  [-F funkcia] [-C príkaz] [-X vzor_filtra] [-P predpona] [-S "
+"prípona] [slovo]"
+
+#: builtins.c:239
+#, fuzzy
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o voľba] [-DE] [názov ...]"
+
+#: builtins.c:242
+#, fuzzy
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-n po�et] [-O za�iatok] [-s po�et] [-t] [-u fd] [-C spätné_volanie] "
+"[-c kvantum] [pole]"
+
+#: builtins.c:244
+#, fuzzy
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-n po�et] [-O za�iatok] [-s po�et] [-t] [-u fd] [-C "
+"spätné_volanie] [-c kvantum] [pole]"
+
+#: builtins.c:256
+#, fuzzy
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Definovať alebo zobraziť aliasy.\n"
+"    \n"
+"    Bez argumentov vypíše všetky definované aliasy vo formáte, ktorý je\n"
+"    možné znova použiť v tvare N�ZOV=HODNOTA na štandardný výstup.\n"
+"    \n"
+"    Inak definuje alias pre každý N�ZOV, ktorého HODNOTA je zadaná.\n"
+"    Medzera na konci HODNOTY spôsobí, že sa v �alšom slove\n"
+"    skontroluje substitúcia aliasu pri expanzii aliasu.\n"
+"    \n"
+"    Voľby:\n"
+"      -p\tVypíše všetky definované aliasy vo formáte, ktorý je možné\n"
+"        \tznova použiť\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti vždy pravdu ak nebol zadaný N�ZOV, pre ktorý nie je definovaný "
+"alias."
+
+#: builtins.c:278
+#, fuzzy
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Odstrániť N�ZVY zo zoznamu definovaných aliasov.\n"
+"    \n"
+"    Voľby:\n"
+"      -a\todstráni všetky definície aliasov.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak nebol zadaný N�ZOV, pre ktorý nie je definovaný alias."
+
+#: builtins.c:291
+#, fuzzy
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"Nastaviť klávesové väzby a premenné Readline.\n"
+"    \n"
+"    Naviaže sekvenciu klávesov na funkciu alebo makro Readline alebo\n"
+"    nastaviť premennú Readline. Syntax argumentu je rovnaká ako tá\n"
+"    v ~/.inputrc, ale musí sa podať ako jediný argument:\n"
+"    bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Voľby:\n"
+"      -m  klávmap        Použije „klávmap“ ako mapu klávesov po�as trvania\n"
+"                         tohto príkazu. Prijateľné názvy klávesových máp sú\n"
+"                         emacs emacs-standard, emacs-meta, emacs-ctlx, vi,\n"
+"                         vi-move, vi-command a vi-insert.\n"
+"      -l                 Vypíše názvy funkcií.\n"
+"      -P                 Vypíše názvy funkcií a väzby.\n"
+"      -p                 Vypíše názvy funkcií a väzby v tvare, ktorý je\n"
+"                         možné znova použiť ako vstup.\n"
+"      -S                 Vypíše klávesové sekvencie, ktoré vyvolávajú makrá "
+"a\n"
+"                         ich hodnoty\n"
+"      -s                 Vypíše klávesové sekvencie, ktoré vyvolávajú makrá "
+"a\n"
+"                         ich hodnoty\n"
+"                         v tvare, ktorý je možné znova použiť ako vstup.\n"
+"      -V                 Vypíše názvy premenných a hodnoty\n"
+"      -v                 Vypíše názvy premenných a hodnoty v tvare, ktorý "
+"je\n"
+"      -q  názov-funkcie  Zistí, ktoré klávesy vyvolávajú túto funkciu.\n"
+"      -u  názov-funkcie  Zruší väzby všetkých kláves naviazaných na túto "
+"funkciu\n"
+"                         možné znova použiť ako vstup.\n"
+"      -r  kláv_sek       Odstráni väzbu pre kláv_sek.\n"
+"      -f  súboru         Na�íta klávesové väzby z SÚBORU.\n"
+"      -x  kláv_sek:príkaz_shellu\tSpôsobí vykonanie PR�KAZU_SHELLU po\n"
+"    \t\t\t\tzadaní KL�V_SEK.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak nebola zadaná neplatná voľba a nevyskytla sa chyba."
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Ukon�enie cyklu for, while alebo until.\n"
+"    \n"
+"    Ukon�iť cyklus FOR, WHILE alebo UNTIL. Ak je zadané N, ukon�iť N\n"
+"    nadradených vnorených cyklov.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Návratová hodnota je 0 ak N nie je vä�šie alebo rovné 1."
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Pokra�ovať v cykle for, while alebo until\n"
+"    \n"
+"    Pokra�uje v nasledujúcej iterácii cyklu FOR, WHILE alebo UNTIL.\n"
+"    Ak je uvedené N, pokra�ovať v �alšej iterácii cyklu o N úrovní vyššej.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak N nie je vä�šie alebo rovné 1."
+
+#: builtins.c:354
+#, fuzzy
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Vykonať vstavenú funkciu shellu.\n"
+"    \n"
+"    Vykoná vstavenú funkciu shellu s argumentami ARG bez vykonania\n"
+"    vyhľadania príkazu. To sa hodí, ke� chcete reimplementovať vstavanú\n"
+"    funkciu shellu ako funkciu shellu, ale potrebujete vstavanú funkciu "
+"volať\n"
+"    v rámci vašej funkcie.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vracia návratový kód vstavanej funkcie shellu alebo 0 ak argument nie "
+"je\n"
+"    vstavaná funkcia shellu."
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Vrátiť kontext aktuálneho volania podprocedúry.\n"
+"    \n"
+"    Bez V�R, vráti „$line $filename“.  S V�R,\n"
+"    vráti „$line $subroutine $filename“; túto informáciu\n"
+"    je možné využiť pre trasovanie zásobníka.\n"
+"    \n"
+"    Hodnota V�R ur�uje o koľko rámcov volania sa vrátiť\n"
+"    pred aktuálny; najvyšší rámec má �íslo 0.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak shell nevykonáva funkciu shellu a EXPR nie je neplatný."
+
+#: builtins.c:387
+#, fuzzy
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"Zmeniť aktuálny adresár shellu.\n"
+"    \n"
+"    Zmení aktuálny adresár na ADR. Predvolený aktuálny adresár je hodnota\n"
+"    premennej shellu HOME.\n"
+"    \n"
+"    Premenná CDPATH definuje cesty, v ktorých sa hľadá adresár obsahujúci "
+"ADR.\n"
+"    Alternatívne názvy adresárov v CDPATH sú oddelené dvojbodkou (:).\n"
+"    Prázdny (null) názov adresára zodpovedá aktuálnemu adresáru, t.j. „.“.\n"
+"    Ak ADR za�ína lomkou (/), CDPATH sa nepoužije.\n"
+"    \n"
+"    Ak adresár nebol nájdený a je nastavená voľba shellu „cdable_vars“,\n"
+"    predpokladá sa, že toto slovo je názov premennej.\n"
+"    Ak táto premenná má hodnotu, vykoná cd na hodnotu premennej.\n"
+"    \n"
+"    Voľby:\n"
+"        -L\tvynúti nasledovanie symbolických odkazov\n"
+"        -P\tpoužije sa fyzická štruktúra adresárov a nie nasledovať\n"
+"    \t\tsymbolické odkazy.\n"
+"        -e\tak je zadaná voľba -P a aktuálny adresár nie je možné\n"
+"    \túspešne ur�iť, ukon�iť s nenulovou návratovou hodnotou\n"
+"    \n"
+"    Štandardne sa budú nasledovať symbolické odkazy ako keby bola\n"
+"    zadaná voľba „-L“.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak bol aktuálny adresár zmenený a ak sa pri použití voľby -P\n"
+"    úspešne nastaví $PWD, inak nenulovú hodnotu."
+
+#: builtins.c:425
+#, fuzzy
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"Vypísať názov aktuálneho pracovného adresára.\n"
+"    \n"
+"    Voľby:\n"
+"      -L\tvypísať hodnotu $PWD ak pomenúva aktuálny pracovný\n"
+"    \tadresár\n"
+"      -P\tvypísať fyzický adresár bez symbolických odkazov\n"
+"    \n"
+"    Štandardne sa „pwd“ správa ako keby bolo uvedené „-L“.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vracia 0 ak nie je zadaná neplatná voľba alebo nie je možné\n"
+"    pre�ítať aktuálny adresár."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Prázdny príkaz.\n"
+"    \n"
+"    Bez ú�inku; príkaz ni� nerobí.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vždy vráti pravda."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Vráti úspešný výsledok\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vždy vráti 0."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Prázdny príkaz.\n"
+"    \n"
+"    Vráti neúspešný výsledok.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vždy vráti nepravda."
+
+#: builtins.c:471
+#, fuzzy
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Vykonať jednoduchý príkaz alebo zobraziť informácie o príkazoch.\n"
+"    \n"
+"    Spustí PR�KAZ s ARG potla�iac vyhľadanie funkcie shellu alebo\n"
+"    zobrazí informácie o uvedených PR�KAZoch. Možno použiť na\n"
+"    vyvolanie externých príkazov ak existuje funkcia s rovnakým názvom.\n"
+"    \n"
+"    Voľby:\n"
+"      -p\tpoužiť štandardnú hodnotu PATH, ktorá zaru�ene nájde všetky\n"
+"    \t\tštandardné nástroje\n"
+"      -v\tvypísať popis PR�KAZu podobný zabudovanému príkazu „type“\n"
+"      -v\tvypísať podrobnejší popis každého PR�KAZu\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti návratovú hodnotu PR�KAZu alebo zlyhá ak nenájde PR�KAZ."
+
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"Nastaviť hodnoty a atribúty premennných.\n"
+"    \n"
+"    Deklaruje premenné a dáva im atribúty. Ak nie sú zadané N�ZVY,\n"
+"    zobrazí atribúty a hodnoty všetkých premenných.\n"
+"    \n"
+"    Voľby:\n"
+"      -f\tobmedzí operáciu alebo výpis na názvy funkcií a definície\n"
+"      -F\tobmedzí výpis iba na názvy funkcií (plus �íslo riadka a\n"
+"    \t\tzdrojový súbor pri ladení)\n"
+"      -g\tvytvorí globálne premenné pri použití vo funkcii shellu; inak\n"
+"    \tsa ignoruje\n"
+"      -p\tzobrazí atribúty a hodnotu každého N�ZVU\n"
+"    \n"
+"    Voľby, ktoré nastavujú atribúty:\n"
+"      -a\turobí z N�ZVU indexované polia (ak sú podporované)\n"
+"      -A\turobí z N�ZVOV asociatívne polia (ak sú podporované)\n"
+"      -i\tdá N�ZVU atribút „celé �íslo“\n"
+"      -l\tprevedie N�ZVY pri priradení na malé písmená\n"
+"      -r\tnastaví N�ZVY iba na �ítanie\n"
+"      -t\tdá N�ZVU atribút „trace“\n"
+"      -u\tprevedie N�ZVY pri priradení na veľké písmená\n"
+"      -x\tprevedie N�ZVY na export\n"
+"    \n"
+"    Pomocou „+“ namiesto „-“ vypnete uvedený atribút.\n"
+"    \n"
+"    Premenné s atribútom „celé �íslo“ vykonávajú aritmetické vyhodnocovanie\n"
+"    (pozri príkaz „let“), ke� je im  priradená hodnota.\n"
+"    \n"
+"    Ke� sa „declare“ použije vo funkcii, N�ZVY budú lokálne ako pri príkaze\n"
+"    „local“.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak nebola zadaná neplatná voľba a nevyskytla sa chyba."
+
+#: builtins.c:532
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"Nastaviť hodnoty a atribúty premenných.\n"
+"    \n"
+"    Zastaralé. Pozri „help declare“."
+
+#: builtins.c:540
+#, fuzzy
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Definovať lokálne premenné.\n"
+"    \n"
+"    Vytvorí lokálnu premennú s názvom N�ZOV a priradí jej HODNOTU.\n"
+"    VOĽBA je ľubovoľná voľba, ktorú prijme „declare“\n"
+"    \n"
+"    Lokálne premenné možno použiť iba v rámci funkcie; sú viditeľné\n"
+"    iba v rámci funkcie, kde sú definované a v jej potomkoch.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak nebola zadaná neplatná voľba, nevyskytla sa chyba a\n"
+"    shell práve nevykonáva funkciu."
+
+#: builtins.c:557
+#, fuzzy
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Vypísať argumenty na štandardný výstup.\n"
+"    \n"
+"    Vypíše ARGumenty na štandardný výstup ukon�ené znakom\n"
+"    nového riadka.\n"
+"    Voľby:\n"
+"      -n\tpotla�í znak nového riadka na konci.\n"
+"      -e\tzapne interpretáciu nasledovných únikových klauzúl\n"
+"      -E\tvypne interpretáciu nasledovných únikových klauzúl\n"
+"    \n"
+"    „echo“ interpretuje nasledovné únikové klauzuly:\n"
+"    \t\\a\tvýstraha (zvon�ek)\n"
+"    \t\\b\tbackspace\n"
+"    \t\\c\tptla�iť posledný znak nového riadka\n"
+"    \t\\e\tescape znaku\n"
+"    \t\\f\tform feed\n"
+"    \t\\n\tnový riadok\n"
+"    \t\\r\tnávrat vozíka\n"
+"    \t\\t\thorizontálny tabulátor\n"
+"    \t\\v\tvertikálny tabulátor\n"
+"    \t\\\\\tspätná lomka\n"
+"    \t\\0nnn\tznak s ASCII kódom NNN (osmi�kový). NNN môže mať\n"
+"    \t\t0 až 3 osmi�kové �íslice\n"
+"      \\xHH\tosembitový znak, ktorého hodnota je HH (hexadecimálne).\n"
+"    \tHH môže mať jednu alebo dve hexadecimálne �íslice.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak sa nevyskytla sa chyba pri zápise."
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Vypísať argumenty na štandardný výstup.\n"
+"    \n"
+"    Vypíše ARGumenty na štandardný výstup ukon�ené znakom\n"
+"    nového riadka.\n"
+"    Voľby:\n"
+"      -n\tpotla�í znak nového riadka na konci.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak sa nevyskytla sa chyba pri zápise."
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"Zapnúť a vypnúť vstavané funkcie shellu.\n"
+"    \n"
+"    Zapína a vypína vstavané funkcie shellu. Vypnutie vám umožní\n"
+"    vykonať externý príkaz s rovnakým názvom ako vstavaná funkcia\n"
+"    shellu bez toho, aby ste museli použiť úplnú cestu k nemu.\n"
+"    \n"
+"    Voľby:\n"
+"      -a\tvypíše zoznam vstavaných funkcií a zobrazí pi každej\n"
+"         \t�i je zapnutá\n"
+"      -n\tvypne každý N�ZOV alebo zobrazí zoznam vypnutých\n"
+"         \tvstavaných funkcií\n"
+"      -p\tvypíše zoznam vstavaných funkcií v tvare, ktorý je\n"
+"         \tmožné znova použiť ako vstup\n"
+"      -s\tvypísať iba názvy Posixových „špeciálnych“\n"
+"         \tvstavaných funkcií\n"
+"    \n"
+"    Voľby riadiace dynamické na�ítanie:\n"
+"      -f\tNa�ítať vstavanú funkciu N�ZOV zo zdieľaného objektu SÚBOR\n"
+"      -d\todstrániť vstavanú funkciu na�ítanú voľbou -f\n"
+"    \n"
+"    Bez volieb zapne každý N�ZOV.\n"
+"    \n"
+"    Ak chcete použiť „test“, ktorý sa nachádza v ceste $PATH namiesto\n"
+"    vstavanej funkcie shellu, napíšte „enable -n test“.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak N�ZOV nie je vstavaná funkcia shellu a nevyskytla sa chyba."
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Vykonať argumenty ako príkaz shellu.\n"
+"    \n"
+"    Skombinovať ARGumenty do jediného reťazca a použiť výsledok\n"
+"    ako vstup shellu a vykonať tieto príkazy.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti návratovú hodnotu príkazu alebo 0 ak je príkaz prázdny."
+
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"Syntaktická analýza volieb.\n"
+"    \n"
+"    Getopts používajú procedúry shellu na analýzu pozi�ných parametrov.\n"
+"    \n"
+"    OPTSTRING obsahuje písmená volieb, ktoré pozná; ak po písmene\n"
+"    nasleduje dvojbodka, po voľbe sa o�akáva argument, ktorý by mal\n"
+"    od nej byť oddelený netla�iteľným znakom (medzera).\n"
+"    \n"
+"    Po každom zavolaní getopts dá nasledujúcu voľbu do premennej\n"
+"    shellu $name, ak name neexeistuje, tak ho inicializuje a index\n"
+"    �alšieho argumentu, ktorý sa má spracovať, dá do premennej\n"
+"    shellu OPTIND. OPTIND je inicializovaný na 1 po každom vyvolaní\n"
+"    shellu alebo shell skriptu. Ke� voľba vyžaduje argument, getopts\n"
+"    dá tento argument do premennej shellu OPTARG.\n"
+"    \n"
+"    getopts oznamuje chyby jedným z dvoch spôsobov. Ak je prvý znak\n"
+"    OPTSTRING dvojbodka, getopts použije tiché oznamovanie chýb. V\n"
+"    Tomto režime sa nevypíšu žiadne chybové správy. Ak getopts vidí\n"
+"    neplatnú voľbu, dá znak nájdenej voľby do OPTARG. Ak nenájde\n"
+"    požadovaný argument, getopts dá do NAME „:“ a nastaví OPTARG\n"
+"    na znak nájdenej voľby. Ak getopts nie je v tichom režime a vidí\n"
+"    neplatnú voľbu, dá do NAME „?“ a zruší (unset) OPTARG. Ak nenájde\n"
+"    požadovaný argument, getopts dá do NAME „?“, zruší (unset) OPTARG\n"
+"    a vypíše diagnostickú správu.\n"
+"    \n"
+"    Ak premenná shellu OPTERR má hodnotu 0, getopts vypne vypisovanie\n"
+"    chybových správ, aj ak prvý znak OPTSTRING  nie je dvojbodka.\n"
+"    OPTERR má štandardne hodnotu 1.\n"
+"    \n"
+"    Getopts normálne spracúva pozi�né parametre ($0 - $9), ale ak je\n"
+"    zadaných viac argumentov, spracuje tieto.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak je voľba nájdená; zlyhá po dosiahnutí konca reťazca volieb\n"
+"    alebo ak sa vyskytne chyba."
+
+#: builtins.c:694
+#, fuzzy
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"Nahradiť shell zadaným príkazom.\n"
+"    \n"
+"    Vykonať PR�KAZ, pri�om sa nahradí tento shell ur�eným programom.\n"
+"    ARGUMENTy dostane PR�KAZ ako argumenty.  Ak nie je zadaný PR�KAZ,\n"
+"    všetky presmerovania sa uskuto�nia v aktuálnom shelli.\n"
+"    \n"
+"    Voľby:\n"
+"      -a názov\tpošle N�ZOV ako nultý argument PR�KAZU\n"
+"      -c\tvykoná PR�KAZ s prázdnym prostredím\n"
+"      -l\tdá poml�ku na nultý argument PR�KAZu\n"
+"    \n"
+"    Ak príkaz nemožno vykonať, neinteraktívny shell sa ukon�í ak nie je\n"
+"    nastavená voľba shellu „execfail“.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak sa nestane, že PR�KAZ nebol nájdený a nevyskytne sa chyba\n"
+"    presmerovania."
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Ukon�iť shell\n"
+"    \n"
+"    Ukon�í shell s návratovou hodnotou N. Ak sa N vynechá, návratová\n"
+"    hodnota  sa nastaví podľa stavu posledného vykonaného príkazu."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Ukon�iť login shell.\n"
+"    \n"
+"    Ukon�í login shell s návratovou hodnotou N. Vráti chybu ak nie je\n"
+"    spustený v login shelli."
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"Zobraziť alebo vykonať príkazy z histórie.\n"
+"    \n"
+"    fc sa používa na vypísanie alebo úpravu a opätovné vykonanie príkazov.\n"
+"    z histórie.\n"
+"    PRV� a POSLEDN� môžu byť �ísla udávajúce rozsah alebo PRV� môže byť\n"
+"    reťazec, ktorý znamená najnedávnejší príkaz za�ínajúci týmto reťazcom.\n"
+"    \n"
+"       -e ENAME zvolí editor, ktorý sa má použiť. Štandardne je to FCEDIT,\n"
+"    \t\tpotom EDITOR, potom vi.\n"
+"    \n"
+"       -l znamená vypísať riadky namiesto úpravy.\n"
+"       -n znamená nevypisovať �ísla riadkov.\n"
+"       -r znamená obrátiť poradie riadkov (najnovšie budú vypísané prvé).\n"
+"    \n"
+"    S formátom „fc -s [pat=rep ...] [príkaz]“ sa znova vykoná uvedený\n"
+"    príkaz po vykonaní náhrady OLD=NEW.\n"
+"    \n"
+"    Užito�ný alias, ktorý sa dá s týmto použiť, je r='fc -s', takže "
+"napísaním\n"
+"    „r cc“ spustíte posledný príkaz za�ínajúci „cc“ a napísaním „r“ "
+"opätovne\n"
+"    vykonáte posledný príkaz.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 alebo stav vykonaného príkazu; nenulovú hodnotu ak sa vyskytne\n"
+"    chyba."
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Presunúť úlohu do popredia.\n"
+"    \n"
+"    Umiestni JOB_SPEC do popredia a urobí ju aktuálnou úlohou. Ak JOB_SPEC\n"
+"    nie je prítomná, použije sa aktuálna úloha shellu.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Stav príkazu umiestneného do popredia; nenulovú hodnotu ak sa vyskytne\n"
+"    chyba."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Presunúť úlohu do popredia.\n"
+"    \n"
+"    Umiestni každú JOB_SPEC do pozadia, ako keby bola spustená s „&“. Ak\n"
+"    JOB_SPEC nie je prítomná, použije sa aktuálna úloha shellu.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak nie je riadenie úloh vypnuté a nevyskytne sa chyba."
+
+#: builtins.c:793
+#, fuzzy
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"Vyvolať alebo zobraziť umiestnenia programu.\n"
+"    \n"
+"    Ur�iť a zapamätať si úplnú cestu ku každému PR�KAZu. Ak nie sú\n"
+"    uvedené žiadne argumenty, zobrazia sa informácie o zapamätaných\n"
+"    príkazoch.\n"
+"    \n"
+"    Voľby:\n"
+"      -d\tzabudnúť zapamätanné umiestnenia každého N�ZVU\n"
+"      -l\tzobraziť vo formáte, ktoré je možné znova použiť ako      \t"
+"\tvstup\n"
+"      -p cesta\tpoužiť CESTU ako plnú cestu k N�ZVU\n"
+"      -r\tzabudnúť všetky zapamätané umiestnenia\n"
+"      -t\tvypísať zapamätané umiestnenia každého N�ZVU, pred\n"
+"        \tne vypísať zodpovedajúci N�ZOV ak sú zadané viaceré\n"
+"        \tN�ZVY\n"
+"    \n"
+"    Argumenty:\n"
+"      N�ZOV\tKaždý N�ZOV sa vyhľadá v $PATH a pridá\n"
+"    \t\tsa do zoznnamu zapamätaných príkazov.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak sa nestalo, že N�ZOV nebol nájdený a nebola zadaná\n"
+"    neplatná voľba."
+
+#: builtins.c:818
+#, fuzzy
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Zobraziť informácie o vstavaných príkazoch.\n"
+"    \n"
+"    Zobrazí stru�né zhrnutia vstavaných príkazov. Ak je zadaný VZOR,\n"
+"    uvedie podrobnosti o všetkých príkazoch zodpovedajúcich VZORu,\n"
+"    inak vypíše zoznam tém pomocníka.\n"
+"    \n"
+"    Voľby:\n"
+"      -d\tvypíše krátky popis každej z tém\n"
+"      -m\tvypíše použitie vo formáte podobnom manuálovej stránke\n"
+"      -s\tvypíše iba krátku syntax použitia každej z tém zodpovedajúcich\n"
+"        \tVZORu\n"
+"    \n"
+"    Argumenty:\n"
+"      VZOR\tVzor ur�ujúci tému pomocníka\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak sa nestalo, že VZOR nebol nájdený a nebola zadaná\n"
+"    neplatná voľba."
+
+#: builtins.c:842
+#, fuzzy
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Zobraziť alebo zmeniť históriu.\n"
+"    \n"
+"    Zobrazí históriu s �íslami riadkov. Riadky s „*“ boli zmenené.\n"
+"    Argument N znamená zobraziť iba posledných N riadkov.\n"
+"    \n"
+"    Voľby:\n"
+"     -c\tvy�istenie histórie vymazaním všetkých jej položiek.\n"
+"     -d\tzmaže položku histórie na pozícii OFSET\n"
+"    \n"
+"     -a\tpridať riadky histórie z aktuálnej relácie do súbory s históriou.\n"
+"     -n\tpre�ítať všetky zatiaľ nepre�ítané riadky\n"
+"     -r\tpre�ítať súbor a pridať jeho obsah do zoznamu histórie\n"
+"       \tzo súboru histórie a pridať ich do zoznamu histórie.\n"
+"     -w\tvypíše aktuálnu históriu do súboru histórie.\n"
+"    \n"
+"     -p\tvykoná expanziu histórie každého ARG a zobrazí výsledok\n"
+"       \tbez toho aby ukladal �okoľvek do histórie.\n"
+"     -s\tpridá ARG, ktoré nie sú voľbami do histórie ako jednu položku.\n"
+"    \n"
+"    Ak je uvedený SÚBOR, použije sa ako súbor histórie, inak sa použije\n"
+"    $HISTFILE ak má nastavenú hodnotu, inak ~/.bash_history.\n"
+"    \n"
+"    Ak je premenná $HISTTIMEFORMAT nastavená a neprázdna, jej hodnota\n"
+"    sa použije ako formátovací reťazec strftime(3) na tla� príslušných\n"
+"    �asových známok zobrazených pri každej položke histórie.\n"
+"    V opa�nom prípade sa nebudú tla�iť �asové známky.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak nebola zadaná neplatná voľba a nevyskytla sa chyba."
+
+#: builtins.c:879
+#, fuzzy
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"Zobraziť stav úloh.\n"
+"    \n"
+"    Vypíše aktívne úlohy. JOBSPEC vypíše iba úlohu s daným JOBSPEC.\n"
+"    Bez volieb sa vypíše stav všetkých aktívnych úloh.\n"
+"    \n"
+"    Voľby:\n"
+"     -l\tvypíše okrem bežných informácií aj ID procesov\n"
+"     -n\tvypíše iba procesy, ktorých stav sa zmenil od poslednej kontroly.\n"
+"     -p\tvypíše iba ID procesov\n"
+"     -r\tobmedzí výstup iba na bežiace úlohy\n"
+"     -s\tobmedzí výstup iba na zastavené úlohy\n"
+"    \n"
+"    Ak je zadaná voľba „-x“ PR�KAZ sa spustí po tom, ako každá\n"
+"    zo špecifikácií úloh, ktoré sú uvedené v ARGS, boli nahradené\n"
+"    ID procesu lídra skupiny procesov danej úlohy.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak nebola zadaná neplatná voľba a nevyskytla sa chyba.\n"
+"    Ak je použitá voľba -x, vráti sa návratová hodnota PR�KAZu."
+
+#: builtins.c:906
+#, fuzzy
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"Odstrániť úlohy z aktuálneho shellu.\n"
+"    \n"
+"    Odstráni každý argument JOBSPEC z tabuľky aktívnych úloh. Bez uvedenia\n"
+"    akýchkoľvek JOBSPEC, shell použije svoj pojem aktuálnej úlohy.\n"
+"    \n"
+"    Voľby:\n"
+"      -a\todstráni všetky úlohy ak nie sú uvedené JOBSPEC\n"
+"      -h\tozna�í každú JOBSPEC tak, že sa jej nepošle SIGHUP ak shell\n"
+"    \t\tdostane SIGHUP\n"
+"      -r\todstráni iba bežiace úlohy\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak nebola zadaná neplatná JOBSPEC."
+
+#: builtins.c:925
+#, fuzzy
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Poslať úlohe signál.\n"
+"    \n"
+"    Pošle procesom s uvedeným PID (alebo JOBSPEC) signál SIGSPEC.  Ak\n"
+"    nie je SIGSPEC uvedená, predpokladá sa SIGTERM.\n"
+"    \n"
+"    Voľby:\n"
+"      -s sig\tSIG je názov signálu\n"
+"      -n sig\tSIG je �íslo signálu\n"
+"      -l\tvypíše názvy signálov; ak sú argumenty uvedené po „-l“,\n"
+"        \tpredpokladá sa, že sú to �ísla signálov ktorých názvy sa majú\n"
+"        \tzobraziť.\n"
+"    \n"
+"    Kill je vstavaný (builtin) príkaz shellu z dvoch dôvodov: umožňuje\n"
+"    použitie ID úlohy okrem ID procesu a ak dosiahnete limit procesov, \n"
+"    ktoré môžete vytvoriť, nemusíte spúšťať proces na ukon�enie iného.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak nebola zadaná neplatná voľba a nevyskytla sa chyba."
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"Vyhodnotiť aritmetické výrazy.\n"
+"    \n"
+"    Vyhodnotí každý ARG ako aritmetický výraz. Vyhodnocuje\n"
+"    sa v celých �íslach bez kontroly prete�enia, hoci delenie nulou sa\n"
+"    detekuje a ozna�í ako chyba. Nasledujúci zoznam operátorov je\n"
+"    zoskupený do úrovní s rovnakou precedenciou operátorov.\n"
+"    Úrovne sú v poradí so zvyšujúcou sa precedenciou.\n"
+"    \n"
+"    \tid++, id--\tpostinkrementácia premennej, postdekrementácia\n"
+"    \t++id, --id--\tpreinkrementácia premennej, predekrementácia\n"
+"    \t-, +\t\tunárne mínus, plus\n"
+"    \t!, ~\t\tlogická negácia a negácia po bitoch\n"
+"    \t**\t\tumocnenie\n"
+"    \t*, /, %\t\tnásobenie, delenie, zvyšok po delení\n"
+"    \t+, -\t\ts�ítanie, od�ítanie\n"
+"    \t<<, >>\t\tposun doľava resp. doprava po bitoch\n"
+"    \t<=, >=, <, >\tporovnanie\n"
+"    \t==, !=\t\trovnosť, nerovnosť\n"
+"    \t&\t\tA po bitoch\n"
+"    \t^\t\tXOR po bitoch\n"
+"    \t|\t\tALEBO po bitoch\n"
+"    \t&&\t\tkonjunkcia\n"
+"    \t||\t\talternatíva\n"
+"    \tvýraz ? výraz : výraz\n"
+"    \t\t\tpodmienený operátor\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tpriradenie\n"
+"    \n"
+"    Premenné shellu sú prípustné ako oeprandy. Názov premennej sa\n"
+"    v rámci výrazu nahradí jej hodotou (prevedenou na celé �íslo).\n"
+"    Nie je nutné, aby bol celo�íselný atribút premennej zapnutý,\n"
+"    aby ju bolo možné použiť vo výraze.\n"
+"    \n"
+"    Operátory sa vyhodnocujú v pradí podľa precedencie. Sub-výrazy\n"
+"    v zátvorkách sa vyhodnocujú ako prvé a majú prednosť pred\n"
+"    hore uvedenými pravidlami precedencie.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Ak sa posledný ARG vyhodnotí na 0, let vráti 1; 0 inak sa vráti 0."
+
+#: builtins.c:994
+#, fuzzy
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"Na�ítať riadok zo štandardného vstupu a rozdeliť ho do polí.\n"
+"    \n"
+"    Zo štandardného vstupu (alebo z popisova�a FD ak je uvedená voľba -u)\n"
+"    sa na�íta jeden riadok. Riadok sa rozdelí do polí ako pri delení \n"
+"    na slová a prvé slovo sa priradí prvému N�ZVU, druhé\n"
+"    slovo druhému N�ZVU at�. až zvyšné slová sa priradia poslednému\n"
+"    N�ZVU. Iba znaky, ktoré sa nachádzajú v $IFS sa považujú za\n"
+"    oddeľova�e slov.\n"
+"    \n"
+"    Ak nie sú uvedené žiadne N�ZVY, na�ítaný riadok sa uloží do premennej\n"
+"    REPLY.\n"
+"    \n"
+"    Voľby:\n"
+"     -a pole\tvšetky na�ítané slová sa priradia postupne indexom poľa POLE,\n"
+"    \t\tpo�ínajúc nulou.\n"
+"     -d\tpokra�ovanie �ítania až kým sa nevyskytne prvý znak znak DELIM\n"
+"    \t\tnamiesto znaku nového riadka.\n"
+"     -e\t\tna na�ítanie riadka sa použije Readline ak je shell "
+"interaktívny.\n"
+"     -i text\tpoužije TEXT ako prvotný text pre Readline\n"
+"      -n nznakov\t�ítanie vstupu skon�í po na�ítaní NZNAKOV znakov bez "
+"�akania\n"
+"    \t\tna nový riadok, ale rešpektovať oddeľova� v prípade menej ako "
+"NZNAKOV\n"
+"      -N nchars\t�ítanie vstupu skon�í presne po na�ítaní ZNAKOV znakov,\n"
+"    \t\tiba ak by sa skôr vyskytol koniec súboru alebo �asový interval na\n"
+"    \t\t�ítanie vypršal, ignorujúc oddeľova�e\n"
+"     -p\tvýzva\tpred pokusom o �ítanie vypíše reťazec V�ZVA bez koncového\n"
+"    \t\tznaku nového riadka.\n"
+"      -r\tzápis únikových klauzúl pomocou spätnej lomky je vypnutý.\n"
+"      -s\tvstup na�ítaný z terminálu nebude vypisovať (echo).\n"
+"      -t interval\tukon�enie �ítania po vypršaní �asového INTERVALu a ak\n"
+"    \tsa do intervalu nena�íta úplný riadok vstupu, vráti chybu. Ak je\n"
+"    \tnastavená premenná TIMEOUT, jej hodnota je štandardný interval\n"
+"    \texpirácie. TIMEOUT môže byť zlomok. Ak je TIMEOUT 0, read sa ukon�í\n"
+"    \túspešne iba ak je na požadovanom popisova�i k dispozícii vsup.\n"
+"    \tNávratová hodnota je vä�šia ako 128 aj sa prekro�í INTERVAL.\n"
+"     -u fd\tnamiesto štandardného vstupu �ítať z popisova�a súboru FD.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak sa nenarazí pri �ítaní nakoniec súboru, nevyprší �as na\n"
+"    �ítanie a ako argument -u nebol je zadaný neplatný popisova�."
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"Návrat z funkcie shellu.\n"
+"    \n"
+"    Spôsobí ukon�enie funkcie alebo skriptu vyvolaného pomocou source\n"
+"    s návratovou hodnotou N. Ak sa N vynechá, návratovou hodnotu je\n"
+"    návratová hodnota posledného vykonaného príkazu v tejto funkcii �i\n"
+"    skripte.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti N alebo zlyhá ak shell nevykonáva funkciu �i skript."
+
+#: builtins.c:1054
+#, fuzzy
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"Nastaviť alebo zrušiť nastavenie volieb shellu a pozi�ných parametrov.\n"
+"    \n"
+"    Zmení hodnotu atribútov shellu a pozi�ných parametrov alebo zobrazí\n"
+"    názvy a hodnoty premenných shellu.\n"
+"    \n"
+"    Voľby:\n"
+"      -a  Ozna�í premenné, ktoré sú zmenené alebo vytvorené na export.\n"
+"      -b  Okamžite oznámi ukon�enie úlohy.\n"
+"      -e  Okamžite sa ukon�í, ke� sa príkaz ukon�í s nenulovou návratovou\n"
+"          hodnotou.\n"
+"      -f  Vypnúť tvorbu názvov súborov (globbing).\n"
+"      -h  Pamätať si, kde sú umiestnené príkazy po ich vyhľadaní.\n"
+"      -k  Všetky argumenty priradenia sa odovzdávajú do prostredia\n"
+"          príkazu, nie len tie, ktoré predchádzajú názvy príkazu.\n"
+"      -m  Riadenie úloh je zapnuté.\n"
+"      -n  Na�ítať príkazy, ale nevykonávať ich.\n"
+"      -o názov-voľby\n"
+"            Nastaví premennú zodpovedajúcu názvu-voľby:\n"
+"              allexport    rovnaké ako -a\n"
+"              braceexpand  rovnaké ako -B\n"
+"              emacs        použiť rozhranie na úpravu príkazového riadka\n"
+"                           v štýle emacs\n"
+"              errexit      rovnaké ako -e\n"
+"              errtrace     rovnaké ako -E\n"
+"              functrace    rovnaké ako -T\n"
+"              hashall      rovnaké ako -h\n"
+"              histexpand   rovnaké ako -H\n"
+"              history      zapnúť históriu príkazov\n"
+"              ignoreeof    shell sa neukon�í po na�ítaní znaku EOF\n"
+"              interactive-comments\n"
+"                           umožní výskyt komentárov v interaktívnych "
+"príkazoch\n"
+"              keyword      rovnaké ako -k\n"
+"              monitor      rovnaké ako -m\n"
+"              noclobber    rovnaké ako -C\n"
+"              noexec       rovnaké ako -n\n"
+"              noglob       rovnaké ako -f\n"
+"              nolog        momentálne sa prijme, ale ignoruje sa\n"
+"              notify       rovnaké ako -b\n"
+"              nounset      rovnaké ako -u\n"
+"              onecmd       rovnaké ako -t\n"
+"              physical     rovnaké ako -P\n"
+"              pipefail     návratová hodnota postupnosti rúr je hodnota\n"
+"                           posledného príkazu, ktorý skon�il s nenulovou\n"
+"                           hodnotou, alebo nula ak žiadny príkaz nevrátil\n"
+"                           nenulovú hodnotu\n"
+"              posix        zmeniť správanie bash, kde sa štandardné "
+"správanie\n"
+"                           líši od štandardu 1003.2 tak, aby mu zodpovedalo\n"
+"              privileged   rovnaké ako -p\n"
+"              verbose      rovnaké ako -v\n"
+"              vi           použiť rozhranie na úpravu príkazového riadka\n"
+"                           v štýle vi\n"
+"              xtrace       rovnaké ako -x\n"
+"      -p  Zapnuté vždy, ke� sa skuto�né a ú�inné ID používateľa nezhoduje.\n"
+"          Vypína spracúvanie súboru $ENV a importovanie funkcií shellu.\n"
+"          Vypnutie tejto voľby spôsobí, že ú�inný UID a GID sa nastavia\n"
+"          na skuto�ný UID a GID.\n"
+"      -t  Ukon�iť po na�ítaní a vykonaní jedného príkazu.\n"
+"      -u  Považovať nenastavené premenné za chybu pri substitúcii.\n"
+"      -v  Vypisovať vstupné riadky shellu postupne ako sa na�ítavajú.\n"
+"      -x  Vypisovať príkazy a ich argumenty postupne ako sa na�ítavajú.\n"
+"      -B  Shell bude vykonávať expanziu zložených zátvoriek\n"
+"      -C  Ak je voľba nastavená, zamedzí prepísaniu existujúcich súborov\n"
+"          persmerovaním výstupu.\n"
+"      -E  Ak je voľba nastavená, zachytenie ERR zdedia funkcie shellu.\n"
+"      -H  Zapne substitúciu príkazov z histórie pomocou znaku !. Tento\n"
+"          prepína� je štandardne zapnutý, ke� je shell interaktívny.\n"
+"      -P  Ak je voľba nastavená, nenasledovať symbolické odkazy pri\n"
+"          vykonávaní príkazov ako cd, ktoré menia aktuálny adresár.\n"
+"      -T  Ak je voľba nastavená, zachytenie DEBUG zdedia funkcie shellu.\n"
+"      --  Odovzdať všetky zostávajúce argumenty pozi�ným parametrom.\n"
+"          Ak nezostávajú žiadne argumenty, zruší sa nastavenie pozi�ných\n"
+"          parametrov.\n"
+"      -   Odovzdať všetky zostávajúce argumenty pozi�ným parametrom.\n"
+"          Voľby -x a -v sú vypnuté.\n"
+"    \n"
+"    Použitie + namiesto - spôsobí vypnutie voľby. Voľby je tiež možné\n"
+"    použiť pri vyvolaní shellu. Momentálne nastavené voľby možno nájsť v\n"
+"    $-. Zostávajúcich n ARGumentov je pozi�ných a priradia sa postupne\n"
+"    premenným $1, $2, .. $n. Ak nie sú zadané žiadne ARGumenty, všetky\n"
+"    premenné shellu sa vypíšu.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak nebola zadaná neplatná voľba."
+
+#: builtins.c:1139
+#, fuzzy
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"Zrušiť nastavenie hodnôt a atribútov premenných shellu a funkcií.\n"
+"    \n"
+"    Pre každý N�ZOV odstráni zodpovedajúcu premennú alebo funkciu.\n"
+"    \n"
+"    Voľby:\n"
+"      -f\tpovažovať každý N�ZOV za funkciu shellu\n"
+"      -v\tpovažovať každý N�ZOV za premennú shellu\n"
+"    \n"
+"    Bez uvedenia volieb sa unset najskôr pokúša zrušiť nastavenie\n"
+"    premennej a ak sa mu to nepodarí, pokúsi sa zrušiť nastavenie\n"
+"    funkcie.\n"
+"    \n"
+"    Nastavenie niektorých premenných nemožno zrušiť; pozri aj „readonly“.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak sa nestalo, že je N�ZOV iba na �ítanie a nebola zadaná\n"
+"    neplatná voľba."
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Nastaviť atribút export premenným shellu.\n"
+"    \n"
+"    Ozna�í každý N�ZOV na automatický export do prostredia �alších\n"
+"    spúšťaných príkazov. Ak je zadaná HODNOTA, pred exportovaním priradí\n"
+"    premenej HODNOTU.\n"
+"    \n"
+"    Voľby:\n"
+"      -f\tozna�uje funkcie shellu\n"
+"      -n\todoberie z N�ZVU atribút export\n"
+"      -p\tzobrazí zoznam exportovaných premenných a funkcií\n"
+"    \n"
+"    Argument „--“ vypína spracovanie �alších volieb.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak sa nestalo, že je N�ZOV neplatný a nebola zadaná\n"
+"    neplatná voľba."
+
+#: builtins.c:1180
+#, fuzzy
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Ozna�iť premenné shellu ako nemeniteľné.\n"
+"    \n"
+"    Ozna�í každý N�ZOV ako len na �ítanie (atribút readonly); hodnoty "
+"týchto\n"
+"    N�ZVOV nie je možné �alej meniť priradením. Ak je zadaná HODNOTA,\n"
+"    pred ozna�ením ako readonly priradiť premenej HODNOTU.\n"
+"    \n"
+"    Voľby:\n"
+"      -a\todkazuje na premenné indexovaných polí\n"
+"      -A\todkazuje na premenné asociatívnych polí\n"
+"      -f\todkazuje na funkcie shellu\n"
+"      -p\tzobrazí zoznam premenných a funkcií len na �ítanie\n"
+"    \n"
+"    Argument „--“ vypína spracovanie �alších volieb.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak sa nestalo, že je N�ZOV neplatný a nebola zadaná\n"
+"    neplatná voľba."
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"Posunúť pozi�né parametre.\n"
+"    \n"
+"    Premenovať pozi�né parametre $N+1,$N+2 ... to $1,$2 ...  Ak N nie je\n"
+"    zadané, predpokladá sa N=1.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak sa nestalo, že je N záporné alebo vä�šie ako $#."
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Vykonať príkazy zo súboru v aktuálnom shelli.\n"
+"    \n"
+"    Na�ítať a vykonať príkazy zo SÚBORu v aktuálnom shelli.\n"
+"    Na nájdenie adresára obsahujúceho SÚBOR sa použijú cesty z $PATH.\n"
+"    Ak sú zadané nejaké ARGUMENTY, použijú sa ako pozi�né argumenty\n"
+"    pri vykonaní SÚBORu.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti návratovú hodnotu posledného príkazu v SÚBORe; zlyhá ak nie je\n"
+"    možné SÚBOR na�ítať."
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Pozastaviť vykonávanie shellu.\n"
+"    \n"
+"    Pozastaviť vykonávanie shellu pokým nedostane signál SIGCONT.\n"
+"    Ak to nie je vynútené, login shell nie je možné pozastaviť.\n"
+"    \n"
+"    Voľby:\n"
+"      -f\tvynútiť pozastavenie aj v prípade, že shell je login shell\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak sa nestalo, že je vypnuté riadenie úloh a nevyskytla sa chyba."
+
+#: builtins.c:1261
+#, fuzzy
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"Vyhodnotiť podmienený výraz.\n"
+"    \n"
+"    Skon�í s návratovou hodnotou 0 (pravda) alebo 1 (nepravda)\n"
+"    v závislosti na vyhodnotení V�R. Výrazy môžu byť unárne alebo\n"
+"    binárne. Unárne výrazy sa �asto používajú na vyhodnotenie stavu\n"
+"    súboru. Existujú aj operátory pracujúce s reťazcami a na\n"
+"    porovnávanie.\n"
+"    \n"
+"    Správanie príkazu test závisí na po�te argumentov. Úplnú\n"
+"    špecifikáciu si môžete pre�ítať na manuálovej stránke bash.\n"
+"    \n"
+"    Operátory súborov:\n"
+"    \n"
+"      -a SÚBOR        Pravda ak súbor existuje.\n"
+"      -b SÚBOR        Pravda ak je súbor špeciálne blokové zariadenie.\n"
+"      -c SÚBOR        Pravda ak je súbor špeciálne znakové zariadenie.\n"
+"      -d SÚBOR        Pravda ak je súbor adresárom.\n"
+"      -e SÚBOR        Pravda ak súbor existuje.\n"
+"      -f SÚBOR        Pravda ak súbor existuje a je to oby�ajný súbor.\n"
+"      -g SÚBOR        Pravda ak je súbor set-group-id.\n"
+"      -h SÚBOR        Pravda ak je súbor symbolický odkaz.\n"
+"      -L SÚBOR        Pravda ak je súbor symbolický odkaz.\n"
+"      -k SÚBOR        Pravda ak má súbor nastavený „sticky“ bit.\n"
+"      -p SÚBOR        Pravda ak je súbor pomenovaná rúra.\n"
+"      -r SÚBOR        Pravda ak je pre vás súbor �itateľný.\n"
+"      -s SÚBOR        Pravda ak súbor existuje a nie je prázdny.\n"
+"      -S SÚBOR        Pravda ak súbor socket.\n"
+"      -t FD          Pravda ak je deskriptor FD otvorený v termináli.\n"
+"      -u SÚBOR        Pravda ak je súbor set-user-id.\n"
+"      -w SÚBOR        Pravda ak je pre vás súbor zapisovateľný.\n"
+"      -x SÚBOR        Pravda ak je pre vás súbor vykonateľný.\n"
+"      -O SÚBOR        Pravda ak ste ú�inným vlastníkom súboru.\n"
+"      -G SÚBOR        Pravda ak je vaša skupina ú�inným vlastníkom súboru.\n"
+"      -N SÚBOR        Pravda ak bol súbor od posledného �ítania zmenený.\n"
+"    \n"
+"      SÚBOR1 -nt SÚBOR2  Pravda ak je SÚBOR1 novší ako SÚBOR2 (podľa\n"
+"                       dátumu poslednej zmeny).\n"
+"    \n"
+"      SÚBOR1 -ot SÚBOR2 Pravda ak je SÚBOR1 starší ako SÚBOR2.\n"
+"    \n"
+"      SÚBOR1 -ef SÚBOR2 Pravda ak je SÚBOR1 pevným odkazom na SÚBOR2.\n"
+"    \n"
+"    Operátory reťazcov:\n"
+"    \n"
+"      -z REŤAZEC      Pravda ak je reťazec prázdny.\n"
+"    \n"
+"      -n REŤAZEC\n"
+"      REŤAZEC         Pravda ak je reťazec neprázdny\n"
+"    \n"
+"      REŤAZEC1 = REŤAZEC2\n"
+"                     Pravda ak sa reťazce rovnajú.\n"
+"      REŤAZEC1 != REŤAZEC2\n"
+"                     Pravda ak sa reťazce nerovnajú.\n"
+"      REŤAZEC1 < REŤAZEC2\n"
+"                     Pravda ak je REŤAZEC1 pre REŤAZCOM2 v lexikografickom "
+"poradí.\n"
+"      REŤAZEC1 > REŤAZEC2\n"
+"                     Pravda ak je REŤAZEC1 po REŤAZCI2 v lexikografickom "
+"poradí.\n"
+"    \n"
+"    Iné operátory:\n"
+"    \n"
+"      -o VOĽBA       Pravda ak je VOĽBA shellu zapnutá.\n"
+"      -v PREM\t Pravda ak je premenná PREM shellu nastavená.\n"
+"      ! V�R          Pravda ak je V�R nepravdivý.\n"
+"      V�R1 -a V�R2   Pavda ak sú oba V�R1 aj V�R2 pravdivé.\n"
+"      V�R1 -o V�R2   Pavda ak je aspoň jeden z V�R1 a V�R2 pravdivý.\n"
+"    \n"
+"      arg1 OP arg2   Aritmetické testy.  OP je jeden  z -eq, -ne,\n"
+"                       -lt, -le, -gt alebo -ge.\n"
+"    \n"
+"    Aritmetické binárne operátory vracajú pravdu, ke� sa ARG1 rovná,\n"
+"    nerovná, je menší, menší alebo rovný, vä�ší, vä�ší alebo rovný ako\n"
+"    ARG2.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak V�R vyhodnotí ako pravdivý; zlyhá ako sa V�R vyhodnotí\n"
+"    ako nepravdivý alebo je zadaný neplatný argument."
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Vyhodnotiť podmienený výraz.\n"
+"    \n"
+"    Toto je synonymum vsatavanej funkcie „test“, ale posledný\n"
+"    argument musí byť literál „]“, ktorý uzatvára otvárajúcu „[“."
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Zobraziť �asy procesov\n"
+"    \n"
+"    Vypíše súhrnné používateľské a systmové �asy shellu a všetkých jeho\n"
+"    potomkov.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vždy vráti 0."
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"Zachytiť signály a iné udalosti.\n"
+"    \n"
+"    Definuje a aktivuje spustenie obsluhy udalosti, ke� shell dostane "
+"signál\n"
+"    SIGNAL_SPEC alebo iných podmienok.\n"
+"    \n"
+"    Príkaz ARG sa na�íta a vykoná, ke� shell dostane signál(y) SIGNAL_SPEC.\n"
+"    Ak ARG chýba (a je uvedený jediný SIGNAL_SPEC) alebo je „-“,\n"
+"    každý uvedený signál sa obnoví na pôvodnú hodnotu. Ak je ARG\n"
+"    prázdny režazec, každý SIGNAL_SPEC shell a príkaz, ktorý vyvolá,\n"
+"    ignoruje.\n"
+"    \n"
+"    Ak SIGNAL_SPEC je EXIT (0), príkaz ARG sa vykoná pri ukon�ení shellu.\n"
+"    Ak je SIGNAL_SPEC DEBUG, ARG sa vykoná po každom jednoduchom príkaze.\n"
+"    Ak je SIGNAL_SPEC RETURN, ARG sa vykoná po každom vykonaní funkcie "
+"shellu\n"
+"    alebo dokon�ení skriptu spusteného pomocou „.“ alebo „source“.\n"
+"    Ak je SIGNAL_SPEC ERR, ARG sa vykoná po každom ukon�ení shellu "
+"spôsobenom\n"
+"    chybou príkazu, ke� je zapnutá voľba -e.\n"
+"    \n"
+"    Ak nie sú uvedené žiadne argumenty, trap vypíše zoznam príkazov\n"
+"    asociovaných s každým signálom.\n"
+"    \n"
+"    Voľby:\n"
+"      -l\tvypíše zoznam názvov signálov a ich zodpovedajúce �ísla\n"
+"      -p\tzobrazia sa príkazy trap asociované s každým SIGNAL_SPEC\n"
+"    \n"
+"    Každý SIGNAL_SPEC je bu� názov signálu ako v <signal.h> alebo �íslo\n"
+"    signálu. V názvoch signálov sa nerozlišuje veľkosť písmen a predpona\n"
+"    SIG je nepovinná. Signál je možné shellu poslať príkazom „kill -signal $"
+"$“.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak sa nestalo, že je SIGSPEC neplatný a nebola zadaná\n"
+"    neplatná voľba."
+
+#: builtins.c:1400
+#, fuzzy
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"Zobraziť informácie o type príkazu.\n"
+"    \n"
+"    Pre každý N�ZOV vypíše ako by sa interpretoval keby bol použitý\n"
+"    ako názov príkazu.\n"
+"    \n"
+"    Voľby:\n"
+"      -a\tzobrazí všetky umiestnenia, ktoré obsahujú spustiteľný súbor\n"
+"        \ts názvom N�ZOV; vrátane aliasov, vstavaných funkcií a funkcií\n"
+"        \tak a iba ak nebola použitá voľba „-p“\n"
+"      -f\tpotla�iť hľadanie vo funkciách shellu\n"
+"      -P\tvynútiť pri každom N�ZVE vyhľadanie v CESTE, aj ak je to alias,\n"
+"        \tvstavaná funkcia alebo funkcia a vráti názov súboru na disku,\n"
+"        \tktorý by sa spustil\n"
+"      -p\tvráti bu� názov súboru na disku, ktorý by sa spustil, alebo ni�\n"
+"        \tak by „type -t NAME“ nevrátilo „file“.\n"
+"      -t\tvypísať jediné slovo, jedno zo slov „alias“, „keyword“,\n"
+"        \t„function“, „builtin“, „file“ alebo „“, ak je názov alias,\n"
+"        \tvyhradené slovo shellu, funkcia shellu, vstavaná funkcia shellu,\n"
+"        \tsúbor na disku alebo N�ZOV nebol nájdený\n"
+"    \n"
+"    Argumenty:\n"
+"      N�ZOV\tNázov príkazu,  ktorý sa má interpretovať.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak boli nájdené všetky N�ZVY; zlyhá ak nie."
+
+#: builtins.c:1431
+#, fuzzy
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Zmeniť obmedzenia prostriedkov shellu.\n"
+"    \n"
+"    Poskytuje kontrolu nad prostriedkami dostupnými procesu,\n"
+"    ktorý spustil shell na systémoch, ktoré takúto kontrolu umožňujú.\n"
+"    Ak sú zadané voľby, vyhodnocujú sa nasledovne:\n"
+"    \n"
+"        -S\tpoužiť „mäkký“ limit prostriedkov\n"
+"        -H\tpoužiť „tvrdý“ limit prostriedkov\n"
+"        -a\toznámi všetky aktuálne limity\n"
+"        -c\tmaximálna veľkosť vytvorených core súborov\n"
+"        -d\tmaximálna veľkosť dátového segmentu procesu\n"
+"        -e\tmaximálna priorita plánovania („nice“)\n"
+"        -f\tmaximálna veľkosť súborov, ktoré zapíše shell a jeho potomkovia\n"
+"        -i\tmaximálny po�et �akajúcich signálov\n"
+"        -l\tmaximálna veľkosť pamäte, ktorú môže proces uzamknúť\n"
+"        -m\tmaximálna veľkosť pracovnej množiny\n"
+"        -n\tmaximálny po�et otvorených popisova�ov súborov\n"
+"        -p\tveľkosť bufera rúry\n"
+"        -q\tmaximálny po�et bajtov v POSIX frontoch správ\n"
+"        -r\tmaximálna priorita plánovania v reálnom �ase\n"
+"        -s\tmaximálna veľkosť zásobníka\n"
+"        -t\tmaximálne množstvo �asu CPU v sekundách\n"
+"        -u\tmaximálny po�et používateľských procesov\n"
+"        -v\tveľkosť virtuálnej pamäte\n"
+"        -x\tmaximálny po�et zámkov súborov\n"
+"    \n"
+"    Ak je zadaný LIMIT, je to nová hodnota zadaného prostriedku;\n"
+"    špeciálne hodnoty LIMIT sú „soft“, „hard“ a „unlimited“, ktoré\n"
+"    znamenajú aktuálny mäkký limit, aktuálny tvrdý limit resp. žiadny "
+"limit.\n"
+"    Inak sa vypíše aktuálna hodnota zadaného prostriedku.\n"
+"    Ak nie je zadaná žiada voľba, predpokladá sa -f.\n"
+"    \n"
+"    Hodnoty sú v násobkoch 1024 bajtov okrem -t, ktorý je v sekundách,\n"
+"    -p, ktorý je v násobkoch 512 bajtov a -u, �o znamená neobmedzený\n"
+"    po�et procesov.\n"
+"    \n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak nebola zadaná neplatná voľba a nevyskytla sa chyba."
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"Zobraziť alebo nastaviť masku režimu súboru.\n"
+"    \n"
+"    Nastaví masku súborov vytvorených používateľom na REŽIM. Ak sa\n"
+"    REŽIM vynechá, vypíše aktuálnu hodnotu masky.\n"
+"    \n"
+"    Ak REŽIM za�ína bodkou, interpretuje sa ako osmi�kové �íslo;\n"
+"    inak je to symbolické ozna�enie režimu aké prijíma chmod(1).\n"
+"    \n"
+"    Voľby:\n"
+"      -p\tak sa REŽIM vynechá, vypíše výstup v tvare, ktorý je možné\n"
+"        \tpoužiť ako vstup\n"
+"      -S\tvýpis v symbolickom tvare; inak osmi�kové �íslo\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak sa nestalo, že je REŽIM neplatný a nebola zadaná\n"
+"    neplatná voľba."
+
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"Čakať na dokon�enie úlohy a vrátiť návratovú hodnotu.\n"
+"    \n"
+"    Po�ká na proces s identifikátorom ID, �o môže byť PID alebo "
+"špecifikácia\n"
+"    úlohy a oznámi stav jeho ukon�enia. Ak nie je ID zadaný, po�ká na "
+"všetky\n"
+"    momentálne aktívne detské procesy vo fronte úloh.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti stav ID; zlyhá ak je ID neplatný alebo bola zadaná\n"
+"    neplatná voľba."
+
+#: builtins.c:1533
+#, fuzzy
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"Čakať na ukon�enie zadaného procesu a vypísať jeho návratovú hodnotu.\n"
+"    \n"
+"    Čaká na ukon�enie zadaného procesu a oznámi jeho návratovú\n"
+"    hodnotu. Ak nie je PID zadané, �aká sa na všetky momentálne\n"
+"    aktívne procesy potomkov a návratová hodnota je nula.\n"
+"    PID musí byť ID procesu.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti stav ID; zlyhá ak je ID neplatný alebo bola zadaná neplatná\n"
+"    voľba."
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Vykoná množinu príkazov pre každú položku zoznamu.\n"
+"    \n"
+"    Cyklus „for“ vykonáva postupnosť príkazov pre každú položku v zozname.\n"
+"    Ak nie je prítomné „in SLOV� ...;“, potom sa predpokladá „in \"$@\"“.\n"
+"    Pre každý prvok v SLOV�ch sa N�ZOV nastaví na hodnotu položky a\n"
+"    vykonajú sa PR�KAZY.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti návratovú hodnotu posledného vykonaného príkazu."
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Aritmetický cyklus for.\n"
+"    \n"
+"    Ekvivalent\n"
+"    \t(( V�R1 ))\n"
+"    \twhile (( V�R2 )); do\n"
+"    \t\tPR�KAZY\n"
+"    \t\t(( V�R3 ))\n"
+"    \tdone\n"
+"    V�R1, V�R2 a V�R3 sú aritmetické výrazy. Ak sa vykoná ktorýkoľvek\n"
+"    výraz, chovanie je ako by sa vyhodnotil na 1.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti návratovú hodnotu posledného vykonaného príkazu."
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Vybrať slová zo zoznamu a vykonať príkazy.\n"
+"    \n"
+"    SLOV� sa rozbalia, �ím sa vytvorí zoznam slov. Zoznam slov sa\n"
+"    vypíše na štandardný chybový výstup, pred každým z nich �íslo.\n"
+"    Ak nie je prítomné „in SLOV�“, použije sa „in \"$@\"“. Zobrazí sa\n"
+"    výzva PS3 a na�íta sa riadok zo štandardného vstupu. Ak riadok\n"
+"    pozostáva z �ísla zodpovedajúcemu jednému zo zobrazených slov,\n"
+"    N�ZOV sa nastaví na dané slovo. Ak je riadok prázdny, SLOV� a\n"
+"    výzva sa znova zobrazia. Po na�ítaní znaku konca súboru príkaz\n"
+"    kon�í. Na�ítanie akejkoľvek inej hodnoty spôsobí nastavenie N�ZVU\n"
+"    na NULL. Na�ítaný riadok sa uloží do premennej ODPOVEĎ. PR�KAZY\n"
+"    sa vykonajú po každom výbere až kým sa nevykoná príkaz break.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti návratovú hodnotu posledného vykonaného príkazu."
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"Oznámiť �as využitý vykonávaním rúry.\n"
+"    \n"
+"    Vykonať RÚRU a po jej skon�ení vypísať zhrnutie skuto�ného �asu,\n"
+"    �asu CPU a systémového �asu CPU stráveného vykonaním RÚRY.\n"
+"    \n"
+"    Voľby:\n"
+"      -p\tvypíše zhrnutie �asov v prenosnom formáte Posix.\n"
+"    \n"
+"    Na formátovanie výstupu sa použije hodnota premennej TIMEFORMAT.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Návratová hodnota je návratová hodnota RÚRY."
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Vykonať príkazy na základe porovnávania vzorov\n"
+"    \n"
+"    Selektívne vykonávať PR�KAZY na základe toho, �i SLOVO zodpovedá\n"
+"    VZORu.. „|“ sa použije na oddelenie viacerých vzorov.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti návratovú hodnotu posledného vykonaného príkazu."
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Vykonať príkazy na základe podmienky.\n"
+"    \n"
+"    Vykoná sa zoznam „if PR�KAZY“. Ak je jeho návratová hodnota nula, "
+"vykoná\n"
+"    sa zoznam „then PR�KAZY“. Inak sa postupne vykoná každý zoznam\n"
+"    „elif PR�KAZY“ a ak je jeho návratová hodnota nula, vykoná sa "
+"zodpovedajúci\n"
+"    zoznam „then PR�KAZY“ a príkaz if skon�í. Inak sa vykoná „else "
+"PR�KAZY“,\n"
+"    ak je prítomný. Návratová hodnota celej konštrukcie je návratová "
+"hodnota\n"
+"    posledného vykonaného príkazu alebo nula ak sa žiadna podmienka\n"
+"    nevyhodnotila na pravdu.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti návratovú hodnotu posledného vykonaného príkazu."
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Vykonávať príkazy kým podmienka platí.\n"
+"    \n"
+"    Rozbaliť a vykonávať PR�KAZY pokým posledný príkaz medzi PR�KAZMI\n"
+"    „while“ nemá návratovú hodnotu nula.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti návratovú hodnotu posledného vykonaného príkazu."
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Vykonávať príkazy kým podmienka neplatí.\n"
+"    \n"
+"    Rozbaliť a vykonávať PR�KAZY pokým posledný príkaz medzi PR�KAZMI\n"
+"    „until“ nemá nenulovú návratovú hodnotu.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti návratovú hodnotu posledného vykonaného príkazu."
+
+#: builtins.c:1671
+#, fuzzy
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"Vytvoriť koproces s názvom N�ZOV.\n"
+"    \n"
+"    Vykoná PR�KAZ asynchrónne, pri�om štandardný výstup a vstup príkazu\n"
+"    spojí rúrou s popsiova�mi súborov priradeným indexom poľa 0 a 1\n"
+"    premennej poľa N�ZOV v spúštajúcom shelli.\n"
+"    Štandardný N�ZOV je „COPROC“.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti návratovú hodnotu PR�KAZu."
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"Definovať funkciu shellu.\n"
+"    \n"
+"    Vytvorí funkciu shellu N�ZOV. Ke� sa spustí ako jednoduchý príkaz, "
+"N�ZOV\n"
+"    spustí PR�KAZy v kontexte vulajúceho shellu. Ke� sa spustí v tvare "
+"N�ZOV,\n"
+"    argumenty sa odovzdajú funkcii ako $1...$n a názov funkcie je "
+"$FUNCNAME.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak sa nestalo, že je N�ZOV iba na �ítanie."
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Zoskupiť príkazy do jednotky.\n"
+"    \n"
+"    Spustiť množinu príkazov v skupine. Toto je jeden zo spôsobov ako\n"
+"    presmerovať celú možinu príkazov.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti návratovú hodnotu posledného vykonaného príkazu."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"Vyhodnotiť podmienený výraz.\n"
+"    \n"
+"    Ekvivalentné argumentu JOB_SPEC príkazu „fg“ Obnoví beh\n"
+"    zastavenej úlohy alebo úlohyu bežiacej v pozadí. JOB_SPEC môže\n"
+"    ur�iť bu� názov alebo �íslo úlohy. Ak po JOB_SPEC nasleduje „&“, úloha\n"
+"    sa umiestni do pozadia, ako keby bola špecifikácia úlohy zadaná ako\n"
+"    argument príkazu „bg“.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti návratovú hodnotu obnovenej úlohy."
+
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Vyhodnotiť aritmetický výraz.\n"
+"    \n"
+"    V�RAZ sa vyhodnotí podľa pravidiel aritmetického vyhodnocovania.\n"
+"    Ekvivalentné s „let V�RAZ“.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 1 ak sa V�RAZ vyhodnotí na 0; inak vráti 0."
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"Vykonať podmienený výraz.\n"
+"    \n"
+"    Vráti 0 alebo 1 v závislosti na vyhodnotení výrazu podmienky V�RAZ.\n"
+"    Výrazy sa skladajú z rovnakých zložiek ako pri vstavanom príkaze\n"
+"    „test“ a je možné ich kombinovať pomocou nasledovných operátorov\n"
+"    \n"
+"    \t( V�RAZ )\tVracia hodnoru výrazu V�RAZ\n"
+"    \t! V�RAZ\tPravdivý, ak je V�RAZ nepravdivý; inak pravdivý\n"
+"    \tV�R1 && V�R2\tPravdivý ak je V�R1 a zároveň V�R2 pravdivý; inak "
+"nepravdivý\n"
+"    \tV�R1 || V�R2\tPravdivý ak je V�R1 alebo V�R2 pravdivý; inak "
+"nepravdivý\n"
+"    \n"
+"    Ak sú použité operátory „==“ a „!=“, reťazec napravo od operátora\n"
+"    sa použije ako vzor a vykoná sa hľadanie zhody reťazcov. Operátory\n"
+"    && a || nevyhodnocujú V�R2 ak hodnota V�R1 posta�uje na ur�enie\n"
+"    hodnoty výrazu.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 alebo 1 v závislosti na hodnote V�RAZu."
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"Bežné názvy premenných shellu a ich použitie\n"
+"    \n"
+"    BASH_VERSION\tInformácie o verzii tohto Bash.\n"
+"    CDPATH\tBodko�iarkami oddelený zoznam adresárov, v ktorých sa budú\n"
+"    \t\thľadať adresáre dané ako argument príkazu „cd“.\n"
+"    GLOBIGNORE\tBodko�iarkami oddelený zoznam vzorov popisujúcich názvy\n"
+"    \t\tsúborov, ktoré má expanzia názvov ciest ignorovať.\n"
+"    HISTFILE\tNázov súboru, kde je uložená vaša história príkazov.\n"
+"    HISTFILESIZE\tMaximálny po�et riadkov, ktorý môže obsahovať.\n"
+"    HISTSIZE\tMaximálny po�et riadkov, su ktorým môže pristupovať\n"
+"    \t\tbežiaci shell.\n"
+"    HOME\tÚplná cesta k vášmu prihlasovaciemu adresáru.\n"
+"    HOSTNAME\tNázov stroja, na ktorom sa momentálne nachádzate.\n"
+"    HOSTTYPE\tTyp procesora, na ktorom beží táto verzia Bash.\n"
+"    IGNOREEOF\tRiadi �innosť shellu po prijatí znaku EOF ako\n"
+"    \t\tjediného na vstupe. Ak je voľba nastavená, jej hodnota je\n"
+"    \t\tpo�et znakov EOF, ktoré budú za sebou prijaté na prázdnom\n"
+"    \t\triadku predtým, než sa shell ukon�í (štandardne 10). Ak voľba\n"
+"    \t\tNie je nastavená, EOF zna�í koniec vstupu.\n"
+"    MACHTYPE\tReťazec popisujúci systém, na ktorom Bash práve beží.\n"
+"    MAILCHECK\tAko �asto v sekundách Bash kontroluje novú poštu.\n"
+"    MAILPATH\tBodko�iarkami oddelený zoznam názvov súborov,\n"
+"    \t\tv ktorých Bash kontroluje novú poštu.\n"
+"    OSTYPE\tVerzia Unixu na ktorej tento Bash beží.\n"
+"    PATH\tBodko�iarkami oddelený zoznam adresárov, v ktorých sa\n"
+"    \t\tmajú hľadať príkazy.\n"
+"    PROMPT_COMMAND\tPríkaz, ktorý sa má vykonať pred každým\n"
+"    \t\tvypísaním primárnej výzvy.\n"
+"    PS1\t\tReťazec primárnej výzvy.\n"
+"    PS2\t\tReťazec sekundárnej výzvy.\n"
+"    PWD\t\tPlná cesta k aktuálnemu adresáru.\n"
+"    SHELLOPTS\tBodko�iarkami oddelený zoznam zapnutých volieb shellu.\n"
+"    TERM\tNázov aktuálneho typu terminálu.\n"
+"    TIMEFORMAT\tFormát výstupu štatistiky doby behu, ktorú zobrazuje\n"
+"    \t\tvyhradené slovo „time“.\n"
+"    auto_resume\tNenulová hodnota zna�í príkaz, ktorý ke� sa vyskytuje na\n"
+"    \t\tsamostatnom riadku, vyhľadá sa v zozname momentálne\n"
+"    \t\tzastavených úloh. Ak sa je tam nachádza, úloha sa prenesie do\n"
+"    \t\tpopredia. Hodnota „exact“ znamená, že slovo príkazu sa musí\n"
+"    \t\tpresne zhodovať s príkazom v zozname zastavených úloh.\n"
+"    \t\tHodnota „substring“ znamená, že slovo príkazu sa musí zhodovať s\n"
+"    \t\tpodreťazcom úlohy. Akákoľvek iná hodnota znamená, že\n"
+"    \t\tpríkaz musí byť predponou zastavenej úlohy.\n"
+"    histchars\tZnaky riadiace dopĺňanie histórie a rýchle\n"
+"    \t\tnahrádzanie.  prvý znak je znak nahrádzania z\n"
+"    \t\thistórie, zvy�ajne „!“. Druhý je znak „rýchleho\n"
+"    \t\tnahrádzania“, zvy�ajne „^“. Tretí je znak\n"
+"    \t\t„komentára histórie“, zvy�ajne „#“.\n"
+"    HISTIGNORE\tBodko�iarkami oddelený zoznam vzoriek, ktoré\n"
+"    \t\tsa používajú na rozhodovanie, �i sa príkaz uloží do histórie.\n"
+
+#: builtins.c:1821
+#, fuzzy
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Pridať adresár na zásobník.\n"
+"    \n"
+"    Pridá adresár na vrchol zásobníka adresárov alebo ho oto�í tak, že\n"
+"    nový vrchol zásobníka sa stane aktuálnym pracovným adresárom.\n"
+"    Bez argumentov vymení vrchné dva adresáre.\n"
+"    \n"
+"    Voľby:\n"
+"      -n\tpotla�í normálnu zmenu adresára pri odstraňovaní položiek\n"
+"        \tzo zásobníka, takže sa zmení iba zásobník.\n"
+"    \n"
+"    Argumenty:\n"
+"      +N\tOto�í zásobník tak, že N-tý adresár (po�ítajúc zľava zoznamu,\n"
+"        \tktorý zobrazuje „dirs“, po�ínajúc nulou) je na vrchu.\n"
+"    \n"
+"      -N\tOto�í zásobník tak, že N-tý adresár (po�ítajúc sprava zoznamu,\n"
+"        \tktorý zobrazuje „dirs“, po�ínajúc nulou) je na vrchu.\n"
+"    \n"
+"      adr\tpridá ADR na vrchol zásobníka adresárov, �ím sa tento stane\n"
+"        \tnovým aktuálnym pracovným adresárom.\n"
+"    \n"
+"    Zásobník adresárov môžete zobraziť vstavaným príkazom „dirs“.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak nebol zadaný neplatný argument a nevyskytla sa\n"
+"    chyba pri zmene adresára."
+
+#: builtins.c:1855
+#, fuzzy
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Odstrániť položky zo zásobníka adresárov.\n"
+"    \n"
+"    Odstráni položky zo zásobníka adresárov. Bez argumentov odstráni\n"
+"    vrchnú položku zo zásobníka a zmení adresár na adresár, ktorý\n"
+"    sa následne nachádza na vrchu zásobníka.\n"
+"    \n"
+"    Voľby:\n"
+"    -n\tpotla�í normálnu zmenu adresára pri odstraňovaní položiek\n"
+"    \tzo zásobníka, takže sa zmení iba zásobník.\n"
+"    \n"
+"    +N\todstráni N-tú položku položku po�ítajúc zľava zoznamu,\n"
+"    \tktorý zobrazuje „dirs“, po�ínajúc nulou. Napríklad: „popd +0“\n"
+"    \todstráni prvý adresár, „popd +1“ druhý.\n"
+"    \n"
+"    -N\todstráni N-tú položku položku po�ítajúc sprava zoznamu,\n"
+"    \tktorý zobrazuje „dirs“, po�ínajúc nulou. Napríklad: „popd -0“\n"
+"    \todstráni posledný adresár, „popd -1“ predposledný.\n"
+"    \n"
+"    Zásobník adresárov môžete zobraziť príkazom „dirs“.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak nebol zadaný neplatný argument a nevyskytla sa\n"
+"    chyba pri zmene adresára."
+
+#: builtins.c:1885
+#, fuzzy
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Zobraziť zoznam momentálne zapamätaných adresárov.\n"
+"    \n"
+"    Zobrazí zoznam momentálne zapamätaných adresárov. Adresáre\n"
+"    sa do zoznamu dostávajú príkazom „pushd“; zo zoznamu ich môžete\n"
+"    vyberať postupne príkazom „popd“.\n"
+"    \n"
+"    Voľby:\n"
+"      -c\tvyprázdniť zásobník adresárov zmazaním všetkých položiek.\n"
+"      -l\tnevypisovať skrátené verzie adresárov vzhľadom na domovský\n"
+"    \t\trelatívne k vášmu domovskému adresáru\n"
+"      -p\tvypisovať zásobník adresárov vo formáte jedna položka na riadok\n"
+"      -v\tvypisovať zásobník adresárov vo formáte jedna položka na\n"
+"    \t\triadok a pred adresár vypísať jeho pozíciu v zásobníku.\n"
+"    \n"
+"      +N\tzobrazuje N-tú položku po�ítajúc zľava zoznamu, ktorý zobrazuje\n"
+"    \t\tdirs vyvolaný bez volieb, po�ínajúc nulou.\n"
+"    \n"
+"      -N\tzobrazuje N-tú položku po�ítajúc sprava zoznamu, ktorý zobrazuje\n"
+"    \t\tdirs vyvolaný bez volieb, po�ínajúc nulou.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak nebol zadaný neplatný argument a nevyskytla sa chyba."
+
+#: builtins.c:1916
+#, fuzzy
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"Nastaviť a zrušiť nastavenie volieb shellu.\n"
+"    \n"
+"    Zmení nastavenie každej z volieb shellu OPTNAME. Bez akýchkoľvek\n"
+"    argumentov volieb vypíše všetky voľby shellu s ozna�ením, �i je každá\n"
+"    z nich nastavená alebo nie.\n"
+"    \n"
+"    Voľby:\n"
+"      -o\tobmedzí OPTNAME na tie, ktoré sú definované na použitie\n"
+"      \tso „set -o“\n"
+"      -p\tvypíše každú voľbu shellu s ozna�ením jej stavu\n"
+"      -q\tpotla�í výstup\n"
+"      -s\tzapnúť (nastaviť) každú OPTNAME\n"
+"      -u\tvypnúť (zrušiť nastavenie) každú OPTNAME\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak je OPTNAME zapnuté; zlyhá ak bola zadaná\n"
+"    neplatná voľba alebo OPTNAME je vypnuté."
+
+#: builtins.c:1937
+#, fuzzy
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"Formátuje a vypisuje ARGUMENTY podľa FORM�Tu.\n"
+"    \n"
+"    Voľby:\n"
+"      -v PREM\tpriradiť výstup premennej shellu PREM namiesto\n"
+"    \t\tzobrazenia na štandarný výstup\n"
+"    \n"
+"    FORM�T je reťazec znakov, ktorý obsahuje tri typy objektov: �isté "
+"znaky,\n"
+"    ktoré sa jednoducho skopírujú na štandardný výstup, únikové klauzuly,\n"
+"    ktoré sa nahradia zodpovedajúcim výstupom a skopírujú na štandardný\n"
+"    výstup a špecifikácie formátu, z ktorých každá spôsobí vypísanie\n"
+"    nasledovného argumentu.\n"
+"    \n"
+"    Okrem štandardných formátov popísaných v printf(1) a printf(3)\n"
+"    printf rozoznáva:\n"
+"    \n"
+"      %b\trozšíriť únikové klauzuly backspace v zodpovedajúcom argumente\n"
+"      %q\tdať argument do zátvoriek tak, aby ho bolo možné použiť ako\n"
+"        \tvstup shellu.\n"
+"      %(fmt)T vyspísať reťacez dátumu a �asu, ktorý vznikne použitím FMT\n"
+"            ako formátovacieho reťazca pre strftime(3)\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak nebola zadaná neplatná voľba a nevyskytla sa chyba pri\n"
+"    zápise �i priradení."
+
+#: builtins.c:1971
+#, fuzzy
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Definuje ako má Readline dopĺňať argumenty.\n"
+"    \n"
+"    Pre každý N�ZOV uviesť ako sa majú dopĺňať argumenty. Ak nie sú zadané\n"
+"    žiadne argumenty, vypíšu sa existujúce dopĺňania v takom tvare, ktorý\n"
+"    je možné znova použiť ako vstup.\n"
+"    \n"
+"    Voľby:\n"
+"      -p\tvypísať existujúce špecifikácie dopĺňania v znovapoužiteľnom\n"
+"        \ttvare\n"
+"      -r\todstrániť špecifikáciu dopĺňania každého N�ZVU alebo ak nie je\n"
+"        \tzadaný žiadny N�ZOV, všetky špecifikácie dopĺňania\n"
+"      -D\tpoužiť dopĺňanie a operácie ako predvolené pre príkazy\n"
+"    \tbez definovaného konkrétneho dopĺňania\n"
+"      -E\tpoužiť dopĺňanie a operácie pre príkazy „empty“ --\n"
+"    \tpokus o dopĺňanie na prázdnom príkazovom riadku\n"
+"    \n"
+"    Pri pokuse o doplnenie sa operácie použijú v poradí hore uvedených\n"
+"    volieb veľkými písmenami.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak nebola zadaná neplatná voľba a nevyskytla sa chyba."
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Zobraziť možné dokon�enie v závislosti na voľbách.\n"
+"    \n"
+"    Slúži na použitie z shell funkcií tvoriacich možné dokon�enia\n"
+"    Ak je daný voliteľný parameter SLOVO, tvoria sa zhody so SLOVOm.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak nebola zadaná neplatná voľba a nevyskytla sa chyba."
+
+#: builtins.c:2016
+#, fuzzy
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"Zmeniť alebo zobraziť voľby dopĺňania.\n"
+"    \n"
+"    Zmení voľby dopĺňania pre každý N�ZOV alebo ak nie je zadaný žiadny\n"
+"    N�ZOV pre momentálne vykonávané dopĺňanie. Ak nie sú zadané žiadne\n"
+"    voľby, vypíše špecifikácie dopĺňania pre každý N�ZOV alebo pre\n"
+"    momentálne vykonávané dopĺňanie.\n"
+"    \n"
+"    Voľby:\n"
+"    \t-o voľba\tNastaví voľbu dopĺňania VOĽBA pre každý N�ZOV\n"
+"    \t-D\t\tZmení voľby dopĺňania príkazov „default“\n"
+"    \t-E\t\tZmení voľby dopĺňania príkazov „empty“\n"
+"    \n"
+"    Použitím „+o“ namiesto „-o“ vypnete ur�enú voľbu.\n"
+"    \n"
+"    Argumenty:\n"
+"    \n"
+"    Každý N�ZOV odkazuje na príkaz, pre ktorý musela byť vopred definovaná\n"
+"    špecifikácia dopĺňania pomocou vstavaného príkazu „complete“. Ak nie sú\n"
+"    zadané žiadne N�ZVY, compopt musí byť volaný priamo funkciou, ktorá\n"
+"    práve tvorí dopĺňanie a voľby generátora momentálne vykonávaného\n"
+"    dopĺňania sa zmenia.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak nebola zadaná neplatná voľba a N�ZOV nemá definovanú\n"
+"    špecifikáciu dopĺňania."
+
+#: builtins.c:2047
+#, fuzzy
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"Na�ítať riadky zo štandardného vstupu do premennej indexovaného poľa.\n"
+"    \n"
+"    Na�íta riadky zo štandardného vstupu do premennej poľa POLE alebo z\n"
+"    popisova�a súboru FD ak je zadaná voľba -u. Štandardné POLE je premenná\n"
+"    MAPFILE.\n"
+"    \n"
+"    Voľby:\n"
+"      -n po�et\tSkopírovať najviac POČET riadkov. Ak je POČET 0, všetky "
+"riadky.\n"
+"      -O za�iatok\tZa�ať prira�ovanie položiek POĽA na indexe ZAČIATOK.\n"
+"      \t\tPredvolený index je 0.\n"
+"      -s po�et\tIgnorovať prvých pre�ítaných POČET riadkov.\n"
+"      -t\t\tOdstrániť znak nového riadka z konca každého na�ítaného riadka.\n"
+"      -u fd\t\tNa�ítať riadky z popisova�a FD namiesto štandardného vstupu.\n"
+"      -C callback\tVyhodnotiť CALLBACK po pre�ítaní každých QUANTUM "
+"riadkov.\n"
+"      -c quantum\tUr�uje po�et riadkov, ktoré sa majú pre�ítať pred každým\n"
+"      \t\tvolaním CALLBACK.\n"
+"    \n"
+"    Argumenty:\n"
+"      ARRAY\t\tNázov premennej poľa, kam sa majú uložiť údaje.\n"
+"    \n"
+"    Ak uvediete -C bez -c, predvolená hodnota quantum je 5000.\n"
+"    Pri vyhodnotení CALLBACK sa dodá index �alšieho prvku poľa,\n"
+"    ktorý sa má priradiť ako �alší argument.\n"
+"    \n"
+"    Ak nie je zadaný ZAČIATOK explicitne, mapfile POLE vy�istí predtým,\n"
+"    než ho za�ne plniť.\n"
+"    \n"
+"    Návratová hodnota:\n"
+"    Vráti 0 ak nebola zadaná neplatná voľba a POLE nie je len na �ítanie a\n"
+"    nie je to indexované pole."
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Na�ítať riadky zo súboru do premennej poľa.\n"
+"    \n"
+"    Synonymum k „mapfile“."
+
+#, fuzzy
+#~ msgid "Copyright (C) 2019 Free Software Foundation, Inc."
+#~ msgstr "Copyright (C) 2011 Free Software Foundation, Inc."
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "Vracia kontext aktuálneho volania podprocedúry.\n"
+#~ "    \n"
+#~ "    Bez EXPR, vracia "
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process: proces %5ld (%s) v the_pipeline"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "Neznáme �íslo signálu"
+
+#~ msgid ""
+#~ "License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl."
+#~ "html>\n"
+#~ msgstr ""
+#~ "Licencia GPLv2+: GNU GPL verzie 2 alebo novšia http://gnu.org/licenses/"
+#~ "gpl.html\n"
+
+#~ msgid ":"
+#~ msgstr ":"
+
+#~ msgid "true"
+#~ msgstr "pravda"
+
+#~ msgid "false"
+#~ msgstr "nepravda"
+
+#~ msgid "times"
+#~ msgstr "-krát"
+
+#~ msgid ""
+#~ ".  With EXPR, returns\n"
+#~ "    "
+#~ msgstr ""
+#~ ".  S V�R vracia\n"
+#~ "    "
+
+#~ msgid ""
+#~ "; this extra information can be used to\n"
+#~ "    provide a stack trace.\n"
+#~ "    \n"
+#~ "    The value of EXPR indicates how many call frames to go back before "
+#~ "the\n"
+#~ "    current one; the top frame is frame 0."
+#~ msgstr ""
+#~ "; tieto informácie naviac možno použiť na\n"
+#~ "    trasovania zásobníka.\n"
+#~ "    \n"
+#~ "    Hodnota V�R zna�í o koľko rámcov sa vrátiť pred sú�asný\n"
+#~ "    Vrchný rámec je rámec 0."
+
+#~ msgid "xrealloc: cannot reallocate %lu bytes (%lu bytes allocated)"
+#~ msgstr ""
+#~ "xrealloc: nie je možné realokovať %lu bajtov (%lu bajtov alokovaných)"
+
+#~ msgid "xrealloc: cannot allocate %lu bytes"
+#~ msgstr "xrealloc: nie je možné alokovať %lu bajtov"
+
+#~ msgid "xrealloc: %s:%d: cannot reallocate %lu bytes (%lu bytes allocated)"
+#~ msgstr ""
+#~ "xrealloc: %s:%d: nie je možné realokovať %lu bajtov (%lu bajtov "
+#~ "alokovaných)"
+
+#~ msgid " "
+#~ msgstr " "
+
+#~ msgid "Without EXPR, returns returns \"$line $filename\".  With EXPR,"
+#~ msgstr "Bez V�R, vráti „$line $filename“.  S V�R,"
+
+#~ msgid "returns \"$line $subroutine $filename\"; this extra information"
+#~ msgstr "vráti „$line $subroutine $filename“; túto informáciu"
+
+#~ msgid "can be used used to provide a stack trace."
+#~ msgstr "je možné využiť pre trasovanie zásobníka."
+
+#~ msgid ""
+#~ "The value of EXPR indicates how many call frames to go back before the"
+#~ msgstr "Hodnota V�R ur�uje o koľko rámcov volania sa vrátiť"
+
+#~ msgid "current one; the top frame is frame 0."
+#~ msgstr "pred aktuálny; najvyšší rámec má �íslo 0."
+
+#~ msgid "%s: invalid number"
+#~ msgstr "%s: neplatné �íslo"
+
+#~ msgid "Shell commands matching keywords `"
+#~ msgstr "Príkazy shellu zodpovedajúce kľú�ovým slovám „"
+
+#~ msgid "Display the list of currently remembered directories.  Directories"
+#~ msgstr "Zobraziť zoznam momentálne zapamätaných adresárov. Adresáre"
+
+#~ msgid "find their way onto the list with the `pushd' command; you can get"
+#~ msgstr "sa do zoznamu dostanú príkazom „pushd“; späť hore v zozname"
+
+#~ msgid "back up through the list with the `popd' command."
+#~ msgstr "sa môžete dostať príkazom „popd“."
+
+#~ msgid ""
+#~ "The -l flag specifies that `dirs' should not print shorthand versions"
+#~ msgstr "Voľba -l hovorí, že „dirs“ by nemal vypísovať skrátené verzie"
+
+#~ msgid ""
+#~ "of directories which are relative to your home directory.  This means"
+#~ msgstr ""
+#~ "adresárov, ktoré sa vzťahujú k vášmu domovskému adresáru. To znamená,"
+
+#~ msgid "that `~/bin' might be displayed as `/homes/bfox/bin'.  The -v flag"
+#~ msgstr "že „~/bin“ sa može zobraziť ako „/homes/bfox/bin“. Voľba -v"
+
+#~ msgid "causes `dirs' to print the directory stack with one entry per line,"
+#~ msgstr ""
+#~ "hovorí, aby „dirs“ vypísal zásobník adresárov s jednou položkou na riadok,"
+
+#~ msgid ""
+#~ "prepending the directory name with its position in the stack.  The -p"
+#~ msgstr "a pred názov adresára vypísal jeho polohu v zásobníku. Voľba -p"
+
+#~ msgid "flag does the same thing, but the stack position is not prepended."
+#~ msgstr "robí presne to isté, len sa nepridáva poloha v zásobníku."
+
+#~ msgid ""
+#~ "The -c flag clears the directory stack by deleting all of the elements."
+#~ msgstr "Voľba -c �istí zásobník adresárov odstránením všetkých prvkov."
+
+#~ msgid ""
+#~ "+N   displays the Nth entry counting from the left of the list shown by"
+#~ msgstr "+N   zobrazí N-tú položku zľava zoznamu zobrazenú pomocou"
+
+#~ msgid "     dirs when invoked without options, starting with zero."
+#~ msgstr "     dirs vyvolaného bez volieb, po�ínajúc nulou."
+
+#~ msgid ""
+#~ "-N   displays the Nth entry counting from the right of the list shown by"
+#~ msgstr "+N   zobrazí N-tú položku sprava zoznamu zobrazenú pomocou"
+
+#~ msgid "Adds a directory to the top of the directory stack, or rotates"
+#~ msgstr "Pridá adresár na vrch zásobníka adresárov alebo oto�í"
+
+#~ msgid "the stack, making the new top of the stack the current working"
+#~ msgstr "zásobník, �ím aktuálny pracovný adresár bude na vrchu"
+
+#~ msgid "directory.  With no arguments, exchanges the top two directories."
+#~ msgstr "zásobníka. Bez argumentov vymení vrchné dva adresáre."
+
+#~ msgid "+N   Rotates the stack so that the Nth directory (counting"
+#~ msgstr "+N   Oto�í zásobník tak, že N-tý adresár (po�ítajúc"
+
+#~ msgid "     from the left of the list shown by `dirs', starting with"
+#~ msgstr "     zľava zoznamu, ktorý vráti „dirs“, po�ínajúc nulou)"
+
+#~ msgid "     zero) is at the top."
+#~ msgstr "     je na vrchu."
+
+#~ msgid "-N   Rotates the stack so that the Nth directory (counting"
+#~ msgstr "-N   Oto�í zásobník tak, že N-tý adresár (po�ítajúc"
+
+#~ msgid "     from the right of the list shown by `dirs', starting with"
+#~ msgstr "     sprava zoznamu, ktorý vráti „dirs“, po�ínajúc nulou)"
+
+#~ msgid "-n   suppress the normal change of directory when adding directories"
+#~ msgstr "-n   potla�iť normálnu zmenu adresára pri pridávaní adresárov"
+
+#~ msgid "     to the stack, so only the stack is manipulated."
+#~ msgstr "     na zásobník, takže sa zmení iba zásobník."
+
+#~ msgid "dir  adds DIR to the directory stack at the top, making it the"
+#~ msgstr "dir  pridá DIR na vrch zásobníka adreárov, �ím ho u�iní"
+
+#~ msgid "     new current working directory."
+#~ msgstr "     novým aktuálnym adresárom."
+
+#~ msgid "You can see the directory stack with the `dirs' command."
+#~ msgstr "Zásobník adresárov môžete zobraziť príkazom „dirs“."
+
+#~ msgid "Removes entries from the directory stack.  With no arguments,"
+#~ msgstr "Odstráni položky zo zásobníka adresárov. Bez argumentov"
+
+#~ msgid "removes the top directory from the stack, and cd's to the new"
+#~ msgstr "odstráni vrchný adresár zo zásobníka a zmení aktuálny adresár"
+
+#~ msgid "+N   removes the Nth entry counting from the left of the list"
+#~ msgstr "+N   Odstráni N-túä položku (po�ítajúc zľava zoznamu,"
+
+#~ msgid "     shown by `dirs', starting with zero.  For example: `popd +0'"
+#~ msgstr "     ktorý vráti „dirs“, po�ínajúc nulou). Napríklad: „popd +0“"
+
+#~ msgid "     removes the first directory, `popd +1' the second."
+#~ msgstr "     odstráni prvý adresár, „popd +1“ druhý."
+
+#~ msgid "-N   removes the Nth entry counting from the right of the list"
+#~ msgstr "-N   Odstráni N-túä položku (po�ítajúc sprava zoznamu,"
+
+#~ msgid "     shown by `dirs', starting with zero.  For example: `popd -0'"
+#~ msgstr "     ktorý vráti „dirs“, po�ínajúc nulou). Napríklad: „popd -0“"
+
+#~ msgid "     removes the last directory, `popd -1' the next to last."
+#~ msgstr "     odstráni posledný adresár, „popd -1“ predposledný."
+
+#~ msgid ""
+#~ "-n   suppress the normal change of directory when removing directories"
+#~ msgstr "-n   potla�iť normálnu zmenu adresára pri odoberaní adresárov"
+
+#~ msgid "     from the stack, so only the stack is manipulated."
+#~ msgstr "     zo zásobníka, takže sa zmení iba zásobník."
+
+#~ msgid "allocated"
+#~ msgstr "alokované"
+
+#~ msgid "freed"
+#~ msgstr "uvoľnené"
+
+#~ msgid "requesting resize"
+#~ msgstr "žiadam o zmenu veľkosti"
+
+#~ msgid "just resized"
+#~ msgstr "veľkosť bola práve zmenená"
+
+#~ msgid "bug: unknown operation"
+#~ msgstr "chyba: neznáma operácia"
+
+#~ msgid "malloc: watch alert: %p %s "
+#~ msgstr "malloc: upozornenie sledovania: %p %s "
+
+#~ msgid ""
+#~ "Exit from within a FOR, WHILE or UNTIL loop.  If N is specified,\n"
+#~ "    break N levels."
+#~ msgstr ""
+#~ "Vysko�í zvnútra cyklu FOR, WHILE alebo UNTIL. Ak je uvedené N,\n"
+#~ "    vysko�í o N úrovní."
+
+#~ msgid ""
+#~ "Run a shell builtin.  This is useful when you wish to rename a\n"
+#~ "    shell builtin to be a function, but need the functionality of the\n"
+#~ "    builtin within the function itself."
+#~ msgstr ""
+#~ "Spustí vstavaný príkaz (builtin) shellu. Toto je užito�né, ke�\n"
+#~ "    chcete premenovať vstavaný príkaz shellu na funkciu, ale\n"
+#~ "    potrebujete funkcionalitu samotného vstavaného príkazu\n"
+#~ "    vnútri funkcie."
+
+#~ msgid ""
+#~ "Print the current working directory.  With the -P option, pwd prints\n"
+#~ "    the physical directory, without any symbolic links; the -L option\n"
+#~ "    makes pwd follow symbolic links."
+#~ msgstr ""
+#~ "Vypíše aktuálny pracovný adresár. S voľbou -P pwd vypíše\n"
+#~ "    fyzický adresár bez symbolických odkazov; s voľbou -L\n"
+#~ "    bude pwd nasledovať symbolické odkazy."
+
+#~ msgid "Return a successful result."
+#~ msgstr "Vráti úspešný výsledok."
+
+#~ msgid ""
+#~ "Runs COMMAND with ARGS ignoring shell functions.  If you have a shell\n"
+#~ "    function called `ls', and you wish to call the command `ls', you can\n"
+#~ "    say \"command ls\".  If the -p option is given, a default value is "
+#~ "used\n"
+#~ "    for PATH that is guaranteed to find all of the standard utilities.  "
+#~ "If\n"
+#~ "    the -V or -v option is given, a string is printed describing "
+#~ "COMMAND.\n"
+#~ "    The -V option produces a more verbose description."
+#~ msgstr ""
+#~ "Spustí PR�KAZ s ARG ignorujúc funkcie shellu. Ak máte funkciu shellu\n"
+#~ "    zvanú „ls“ a chcete zavolať príkaz „ls“, môžete napísať\n"
+#~ "    „command ls“. Ak je zadaná voľba -p, použije sa štandardná hodnota\n"
+#~ "    PATH, ktorá zaru�ene nájde všetky štandardné nástroje. Ak je zadaná\n"
+#~ "    voľba -V alebo -v, vypíše sa popis PR�KAZU.\n"
+#~ "    Voľba -V poskytuje podrobnejší výstup."
+
+#~ msgid ""
+#~ "Declare variables and/or give them attributes.  If no NAMEs are\n"
+#~ "    given, then display the values of variables instead.  The -p option\n"
+#~ "    will display the attributes and values of each NAME.\n"
+#~ "    \n"
+#~ "    The flags are:\n"
+#~ "    \n"
+#~ "      -a\tto make NAMEs arrays (if supported)\n"
+#~ "      -f\tto select from among function names only\n"
+#~ "      -F\tto display function names (and line number and source file name "
+#~ "if\n"
+#~ "    \tdebugging) without definitions\n"
+#~ "      -i\tto make NAMEs have the `integer' attribute\n"
+#~ "      -r\tto make NAMEs readonly\n"
+#~ "      -t\tto make NAMEs have the `trace' attribute\n"
+#~ "      -x\tto make NAMEs export\n"
+#~ "    \n"
+#~ "    Variables with the integer attribute have arithmetic evaluation (see\n"
+#~ "    `let') done when the variable is assigned to.\n"
+#~ "    \n"
+#~ "    When displaying values of variables, -f displays a function's name\n"
+#~ "    and definition.  The -F option restricts the display to function\n"
+#~ "    name only.\n"
+#~ "    \n"
+#~ "    Using `+' instead of `-' turns off the given attribute instead.  "
+#~ "When\n"
+#~ "    used in a function, makes NAMEs local, as with the `local' command."
+#~ msgstr ""
+#~ "Deklaruje premenné a/alebo im dodá argumenty. Ak nie sú zadané\n"
+#~ "    N�ZVY, zobraziť hodnoty premenných. Voľba -p zobrazí atribúty\n"
+#~ "    a hotnoty každého N�ZVU.\n"
+#~ "    \n"
+#~ "    Príznaky sú:\n"
+#~ "    \n"
+#~ "      -a\tna vytvorenie polí N�ZVOV (ak sú podporované)\n"
+#~ "      -f\tna výber iba spomedzi názvov funkcií\n"
+#~ "      -F\tna zobrazenie názvov funkcií (a �ísla riadku a zdrojového "
+#~ "súboru\n"
+#~ "    \tpre ladenie) bez definícií\n"
+#~ "      -i\taby mali N�ZVY atribút „integer“\n"
+#~ "      -r\taby boli N�ZVY len na �ítanie\n"
+#~ "      -t\taby mali N�ZVY atribút „trace“\n"
+#~ "      -x\taby sa N�ZVY exportovali\n"
+#~ "    \n"
+#~ "    Premenné s atribútom integer vykonávajú aritmetické vyhodnocovanie "
+#~ "(pozri\n"
+#~ "    „let“) po priradení výrazu premennej.\n"
+#~ "    \n"
+#~ "    Pri zobrazovaní hodnôt premenných, -f zobrazí názov a definíciu\n"
+#~ "    funkcie. Voľba -F obmedzí zobrazovanie iba na názov funkcie.\n"
+#~ "    \n"
+#~ "    Pomocou „+“ namiesto „-“ sa vypína daný atribút. Ke� sa použije vo\n"
+#~ "    funkcii, spôsobí lokálnosť N�ZVOV ako pri príkaze „local“ command."
+
+#~ msgid "Obsolete.  See `declare'."
+#~ msgstr "Zastaralé.  Pozri „declare“."
+
+#~ msgid ""
+#~ "Create a local variable called NAME, and give it VALUE.  LOCAL\n"
+#~ "    can only be used within a function; it makes the variable NAME\n"
+#~ "    have a visible scope restricted to that function and its children."
+#~ msgstr ""
+#~ "Vytvorí lokálnu premennú s N�ZVOM a priradí jej HODNOTU. LOCAL\n"
+#~ "    je možné použiť iba v rámci funkcie; spôsobí obmedzenie viditeľnosti\n"
+#~ "    premennej N�ZOV iba na túto funkciu a jej potomkov."
+
+#~ msgid ""
+#~ "Output the ARGs.  If -n is specified, the trailing newline is suppressed."
+#~ msgstr ""
+#~ "Vypíše ARGumenty. S voľbou -n bude posledný znak nového riadka potla�ený."
+
+#~ msgid ""
+#~ "Enable and disable builtin shell commands.  This allows\n"
+#~ "    you to use a disk command which has the same name as a shell\n"
+#~ "    builtin without specifying a full pathname.  If -n is used, the\n"
+#~ "    NAMEs become disabled; otherwise NAMEs are enabled.  For example,\n"
+#~ "    to use the `test' found in $PATH instead of the shell builtin\n"
+#~ "    version, type `enable -n test'.  On systems supporting dynamic\n"
+#~ "    loading, the -f option may be used to load new builtins from the\n"
+#~ "    shared object FILENAME.  The -d option will delete a builtin\n"
+#~ "    previously loaded with -f.  If no non-option names are given, or\n"
+#~ "    the -p option is supplied, a list of builtins is printed.  The\n"
+#~ "    -a option means to print every builtin with an indication of whether\n"
+#~ "    or not it is enabled.  The -s option restricts the output to the "
+#~ "POSIX.2\n"
+#~ "    `special' builtins.  The -n option displays a list of all disabled "
+#~ "builtins."
+#~ msgstr ""
+#~ "Zapína a vypína vstavené (builtin) príkazy shellu. Toto vám umožní\n"
+#~ "    použiť príkaz s rovnakým názvom ako má vstavaný príkaz shellu\n"
+#~ "    bez toho, aby ste uvádzali plnú cestu. S voľbou -n budú N�ZVY\n"
+#~ "    vypnuté; inak budú N�ZVY zapnuté. Napríklad ak chcete použiť\n"
+#~ "    „test“, ktorý sa nachádza v $PATH namiesto vstavaného príkazu,\n"
+#~ "    napíšte „enable -n test“. Na systémoch, ktoré podporujú dynamické\n"
+#~ "    nahrávanie je možné použiť voľbu -f na na�ítanie nových vstavaných\n"
+#~ "    príkazov zo zdieľaného objektu N�ZOVSÚBORU. Voľba -d zmaže\n"
+#~ "    vstavaný príkaz, ktorý bol predtým na�ítaný pomocou -f. Ak nie sú\n"
+#~ "    zadané žiadne názvy okrem volieb alebo je zadaná voľba -p , vypíše\n"
+#~ "    sa zoznam vstavaných príkazov. Voľba -a znamená, že sa má vypísať\n"
+#~ "    každý vstavaný príkaz a �i je zapnutý alebo vypnutý. Voľba -s "
+#~ "obmedzí\n"
+#~ "    výstup na POSIX.2 „special“ vstavané príkazy. Voľba -n zobrazí "
+#~ "zoznam\n"
+#~ "    všetkých vypnutých vstavaných príkazov."
+
+#~ msgid ""
+#~ "Read ARGs as input to the shell and execute the resulting command(s)."
+#~ msgstr "Pre�íta ARGumenty ako vstup do shellu a vykoná výsledné príkazy."
+
+#~ msgid ""
+#~ "Exec FILE, replacing this shell with the specified program.\n"
+#~ "    If FILE is not specified, the redirections take effect in this\n"
+#~ "    shell.  If the first argument is `-l', then place a dash in the\n"
+#~ "    zeroth arg passed to FILE, as login does.  If the `-c' option\n"
+#~ "    is supplied, FILE is executed with a null environment.  The `-a'\n"
+#~ "    option means to make set argv[0] of the executed process to NAME.\n"
+#~ "    If the file cannot be executed and the shell is not interactive,\n"
+#~ "    then the shell exits, unless the shell option `execfail' is set."
+#~ msgstr ""
+#~ "Vykoná SÚBOR, pri�om nahradí tento shell uvedeným programom.\n"
+#~ "    Ak SÚBOR nie je zadaný, presmerovania sa uskuto�nia v tomto\n"
+#~ "    shelli. Ak je prvý argument „-l“, potom dá znak spojovník do\n"
+#~ "    nultého arg, ktorý sa dáva SÚBORU, tak ako to robí login. Ak sa\n"
+#~ "    zadá voľba „-c“, SÚBOR sa vykoná s null prostredím. Voľba „-a“\n"
+#~ "    znamená nastaviľ argv[0] vykonávaného procesu na N�ZOV.\n"
+#~ "    Ak súbor nie je možné vykonať a shell nie je interaktívny, potom,\n"
+#~ "    shell skon�í, ak nie je nastavená voľba „execfail“."
+
+#~ msgid "Logout of a login shell."
+#~ msgstr "Odhlásiť sa z login shelu."
+
+#~ msgid ""
+#~ "For each NAME, the full pathname of the command is determined and\n"
+#~ "    remembered.  If the -p option is supplied, PATHNAME is used as the\n"
+#~ "    full pathname of NAME, and no path search is performed.  The -r\n"
+#~ "    option causes the shell to forget all remembered locations.  The -d\n"
+#~ "    option causes the shell to forget the remembered location of each "
+#~ "NAME.\n"
+#~ "    If the -t option is supplied the full pathname to which each NAME\n"
+#~ "    corresponds is printed.  If multiple NAME arguments are supplied "
+#~ "with\n"
+#~ "    -t, the NAME is printed before the hashed full pathname.  The -l "
+#~ "option\n"
+#~ "    causes output to be displayed in a format that may be reused as "
+#~ "input.\n"
+#~ "    If no arguments are given, information about remembered commands is "
+#~ "displayed."
+#~ msgstr ""
+#~ "Pre každý N�ZOV sa ur�í a zapamätá plná cesta k príkazu. Ak je daná voľba "
+#~ "-p\n"
+#~ "    CESTA sa použije ako plná cesta k N�ZOV a nevykoná sa hľadanie "
+#~ "cesty.\n"
+#~ "    Voľba -r spôsobí, že shell zabudne všetky zapamätané miesta.\n"
+#~ "    Voľba -d spôsobí, že shell zabudne zapamätané miesto každého N�ZVU.\n"
+#~ "    Ak je zadaná voľba -t, vypíše sa plná cesta zodpovedajúca každému\n"
+#~ "    N�ZVU. Ak sú s voľbou -t uvedené viaceré argumenty N�ZOV, pred\n"
+#~ "    plnou cestou sa vypíše N�ZOV. Voľba -l vypíše výstup vo forme, ktorú\n"
+#~ "    je možné znova použiť ako vstup. Ak nie sú zadané žiadne argumenty,\n"
+#~ "    zobrazia sa informácie o zapamätaných príkazoch."
+
+#~ msgid ""
+#~ "Display helpful information about builtin commands.  If PATTERN is\n"
+#~ "    specified, gives detailed help on all commands matching PATTERN,\n"
+#~ "    otherwise a list of the builtins is printed.  The -s option\n"
+#~ "    restricts the output for each builtin command matching PATTERN to\n"
+#~ "    a short usage synopsis."
+#~ msgstr ""
+#~ "Zobrazí užito�né informácie o vstavaných (builtin) príkazoch.  Ak je\n"
+#~ "    uvedený VZOR, poskytne podrobné informácie o všetkých príkazoch\n"
+#~ "    zodpovedajúcich VZORU. Inak sa vypíše zoznam vstavaných príkazov.\n"
+#~ "    Voľba -s obmedzí výstup pre každý príkaz zodpovedajúci VZORU na\n"
+#~ "    krátke zhrnutie použitia."
+
+#~ msgid ""
+#~ "By default, removes each JOBSPEC argument from the table of active jobs.\n"
+#~ "    If the -h option is given, the job is not removed from the table, but "
+#~ "is\n"
+#~ "    marked so that SIGHUP is not sent to the job if the shell receives a\n"
+#~ "    SIGHUP.  The -a option, when JOBSPEC is not supplied, means to remove "
+#~ "all\n"
+#~ "    jobs from the job table; the -r option means to remove only running "
+#~ "jobs."
+#~ msgstr ""
+#~ "Štandardne odstráni argument JOBSPEC z tabuľky aktívnych úloh.\n"
+#~ "    Ak je uvedená voľba „-h“, úloha sa neodstráni z tabuľky, ale ozna�í "
+#~ "sa\n"
+#~ "    tak, že SIGHUP sa nepošle úlohe, ak shell dostane SIGHUP. Voľba „-a“\n"
+#~ "    bez uvedenej JOBSPEC znamená odstránenie všetkých úloh z tabuľky\n"
+#~ "    úloh; voľba „-r“ znamená odstrániť iba bežiace úlohy."
+
+#~ msgid ""
+#~ "Causes a function to exit with the return value specified by N.  If N\n"
+#~ "    is omitted, the return status is that of the last command."
+#~ msgstr ""
+#~ "Spôsobí, že sa funkcia ukon�í s návratovou hodnotou N. Ak N\n"
+#~ "    vynecháte, vráti sa návratová hodnota posledného vykonaného\n"
+#~ "    príkazu."
+
+#~ msgid ""
+#~ "For each NAME, remove the corresponding variable or function.  Given\n"
+#~ "    the `-v', unset will only act on variables.  Given the `-f' flag,\n"
+#~ "    unset will only act on functions.  With neither flag, unset first\n"
+#~ "    tries to unset a variable, and if that fails, then tries to unset a\n"
+#~ "    function.  Some variables cannot be unset; also see readonly."
+#~ msgstr ""
+#~ "Pre každý N�ZOV odstráni zodpovedajúcu premennú alebo funkciu.\n"
+#~ "    Ak je zadaný prepína� „-v“, unset bude ú�inkovať iba na premenné.\n"
+#~ "    Ak je zadaný prepína� „-t“, unset bude ú�inkovať iba na funkcie.\n"
+#~ "    Bez prepína�ov sa unset pokúsi najprv zrušiť nastavenie premennej\n"
+#~ "    a ak to zlyhá, pokúsi sa zrušiť nastavenie  funkcie.\n"
+#~ "    Niektoré premenné nemožno zrušiť; pozri aj readonly."
+
+#~ msgid ""
+#~ "NAMEs are marked for automatic export to the environment of\n"
+#~ "    subsequently executed commands.  If the -f option is given,\n"
+#~ "    the NAMEs refer to functions.  If no NAMEs are given, or if `-p'\n"
+#~ "    is given, a list of all names that are exported in this shell is\n"
+#~ "    printed.  An argument of `-n' says to remove the export property\n"
+#~ "    from subsequent NAMEs.  An argument of `--' disables further option\n"
+#~ "    processing."
+#~ msgstr ""
+#~ "N�ZVY sa ozna�ia na automatický export do prostredia následne\n"
+#~ "    vykonaných príkazov. Ak je zadaná voľba -f, N�ZVY odkazujú na\n"
+#~ "    funkcie. Ak nezadáte žiadne N�ZVY alebo zadáte voľbu „-p“,\n"
+#~ "    vypíše sa zoznam všetkých názvov, ktoré sú exportované v tomto\n"
+#~ "    shelli.  Argument „-n“ hovorí, že sa má odstrániť vlastnosť export z\n"
+#~ "    nasledujúcich N�ZVOV.  Argument „--“ vypína spracovanie �alších\n"
+#~ "    volieb."
+
+#~ msgid ""
+#~ "The given NAMEs are marked readonly and the values of these NAMEs may\n"
+#~ "    not be changed by subsequent assignment.  If the -f option is given,\n"
+#~ "    then functions corresponding to the NAMEs are so marked.  If no\n"
+#~ "    arguments are given, or if `-p' is given, a list of all readonly "
+#~ "names\n"
+#~ "    is printed.  The `-a' option means to treat each NAME as\n"
+#~ "    an array variable.  An argument of `--' disables further option\n"
+#~ "    processing."
+#~ msgstr ""
+#~ "Zadané N�ZVY sa ozna�ia iba na �ítanie a hodnoty týchto N�ZVOV nebude\n"
+#~ "    možné zmeniť �alším priradením. Ak je zadaná voľba -f, ozna�ia sa "
+#~ "takto\n"
+#~ "    funkcie zodpovedajúce N�ZVU. Ak nie sú zadané žiadne argumenty alebo\n"
+#~ "    je zadané „-p“, vypíše sa zoznam všetkých názvov len na �ítanie. "
+#~ "Voľba „-a“\n"
+#~ "    znamená, že sa každá premenná N�ZOV bude považovať za pole. Argument\n"
+#~ "    „--“ vypína spracovanie �alších volieb."
+
+#~ msgid ""
+#~ "The positional parameters from $N+1 ... are renamed to $1 ...  If N is\n"
+#~ "    not given, it is assumed to be 1."
+#~ msgstr ""
+#~ "Pozi�né parametre od $N+1 ... sa premenujú na $1 ...  Ak\n"
+#~ "    neuvediete N, predpokladá sa 1."
+
+#~ msgid ""
+#~ "Suspend the execution of this shell until it receives a SIGCONT\n"
+#~ "    signal.  The `-f' if specified says not to complain about this\n"
+#~ "    being a login shell if it is; just suspend anyway."
+#~ msgstr ""
+#~ "Odstaviť vykonávanie tohto shellu, kým nedostane signál\n"
+#~ "    SIGCONT. Zadanie voľby „-f“ hovorí, že sa shell nemá sťažovať,\n"
+#~ "    ak je prihlasovací a napriek tomu sa má odhlásiť."
+
+#~ msgid ""
+#~ "Print the accumulated user and system times for processes run from\n"
+#~ "    the shell."
+#~ msgstr ""
+#~ "Vypísať kumulatívne používateľské a systémové �asy  procesov\n"
+#~ "    spustených zo shellu."
+
+#~ msgid ""
+#~ "For each NAME, indicate how it would be interpreted if used as a\n"
+#~ "    command name.\n"
+#~ "    \n"
+#~ "    If the -t option is used, `type' outputs a single word which is one "
+#~ "of\n"
+#~ "    `alias', `keyword', `function', `builtin', `file' or `', if NAME is "
+#~ "an\n"
+#~ "    alias, shell reserved word, shell function, shell builtin, disk "
+#~ "file,\n"
+#~ "    or unfound, respectively.\n"
+#~ "    \n"
+#~ "    If the -p flag is used, `type' either returns the name of the disk\n"
+#~ "    file that would be executed, or nothing if `type -t NAME' would not\n"
+#~ "    return `file'.\n"
+#~ "    \n"
+#~ "    If the -a flag is used, `type' displays all of the places that "
+#~ "contain\n"
+#~ "    an executable named `file'.  This includes aliases, builtins, and\n"
+#~ "    functions, if and only if the -p flag is not also used.\n"
+#~ "    \n"
+#~ "    The -f flag suppresses shell function lookup.\n"
+#~ "    \n"
+#~ "    The -P flag forces a PATH search for each NAME, even if it is an "
+#~ "alias,\n"
+#~ "    builtin, or function, and returns the name of the disk file that "
+#~ "would\n"
+#~ "    be executed."
+#~ msgstr ""
+#~ "Pre každý N�ZOV ur�í ako by sa interpretoval, keby sa použil ako\n"
+#~ "    názov príkazu.\n"
+#~ "    \n"
+#~ "    Ak je použitá voľba -t, „type“ vypíše jediné slovo, ktoré je jedno z\n"
+#~ "    „alias“, „keyword“, „function“, „builtin“, „file“ alebo „“, ak N�ZOV\n"
+#~ "    je alias, vyhradené slovo shellu, funkcia shellu, vstavaný príkaz "
+#~ "shellu,\n"
+#~ "    súbor na disku resp. nezistený typ.\n"
+#~ "    \n"
+#~ "    Ak je použitá voľba -p, „type“ vypíše bu� názov súboru na disku,\n"
+#~ "    ktorý by sa vykonal alebo ni� ak by „type -t N�ZOV“ nevrátilo\n"
+#~ "    „file“.\n"
+#~ "    \n"
+#~ "    Ak je použitá voľba -a, „type“ vypíše všetky miesta, ktoré obsahujú\n"
+#~ "    spustiteľný súbor s názvom Ak je použitá voľba -t, „file“. Sem "
+#~ "patria\n"
+#~ "    aliasy, vstavané premenné a funkcie ak a iba ak nie je zároveň "
+#~ "zadaný\n"
+#~ "    prepína� -p.\n"
+#~ "    \n"
+#~ "    Voľba -f potla�í vyhľadávanie funkcií shellu.\n"
+#~ "    \n"
+#~ "    Voľba -P vynúti vyhľadanie každého N�ZVU v ceste (premenná PATH),\n"
+#~ "    aj ak je to alias, vstavaný príkaz shellu alebo funkcia a vráti "
+#~ "názov\n"
+#~ "    súboru na disku, ktorý by sa vykonal."
+
+#~ msgid ""
+#~ "The user file-creation mask is set to MODE.  If MODE is omitted, or if\n"
+#~ "    `-S' is supplied, the current value of the mask is printed.  The `-"
+#~ "S'\n"
+#~ "    option makes the output symbolic; otherwise an octal number is "
+#~ "output.\n"
+#~ "    If `-p' is supplied, and MODE is omitted, the output is in a form\n"
+#~ "    that may be used as input.  If MODE begins with a digit, it is\n"
+#~ "    interpreted as an octal number, otherwise it is a symbolic mode "
+#~ "string\n"
+#~ "    like that accepted by chmod(1)."
+#~ msgstr ""
+#~ "Používateľská maska pre tvorbu súborov sa nastaví na REŽIM. Ak\n"
+#~ "    vynecháte REŽIM alebo zadáte „-S“, vypíše sa aktuálna hodnota masky.\n"
+#~ "    Voľba „-S“ vypisuje symbolický výstup; inak sa vypisuje �íslo v "
+#~ "osmi�kovej\n"
+#~ "    sústave. Ak je zadaná voľba „-p“ a REŽIM sa vynechá, výstup je v "
+#~ "tvare,\n"
+#~ "    ktorý je možné použiť ako vstup. Ak REŽIM za�ína �íslicou, "
+#~ "interpretuje sa\n"
+#~ "    ako �íslo v osmi�kovej sústave, inak je to symbolický reťazec "
+#~ "režimu,\n"
+#~ "    v tvare, aký prijíma chmod(1)."
+
+#~ msgid ""
+#~ "Wait for the specified process and report its termination status.  If\n"
+#~ "    N is not given, all currently active child processes are waited for,\n"
+#~ "    and the return code is zero.  N is a process ID; if it is not given,\n"
+#~ "    all child processes of the shell are waited for."
+#~ msgstr ""
+#~ "Čakať na ukon�enie zadaného procesu a vypísať jeho návratovú\n"
+#~ "    hodnotu. Ak nie je N zadané, �aká sa na všetky momentálne\n"
+#~ "    aktívne procesy potomkov a návratová hodnota je nula. N je\n"
+#~ "    ID procesu; ak nie je zadaný, �aká sa na ukon�enie všetkých\n"
+#~ "    procesov potomkov shellu."
+
+#~ msgid ""
+#~ "Create a simple command invoked by NAME which runs COMMANDS.\n"
+#~ "    Arguments on the command line along with NAME are passed to the\n"
+#~ "    function as $0 .. $n."
+#~ msgstr ""
+#~ "Vytvoriť jednoduchý príkaz, ktorý sa vyvolá pomocou N�ZVU a spustí\n"
+#~ "    PR�KAZY. Argumenty príkazového riadka sa spolu s N�ZVOM dodajú\n"
+#~ "    funkcii v premenných $0 až $n."
+
+#~ msgid ""
+#~ "Toggle the values of variables controlling optional behavior.\n"
+#~ "    The -s flag means to enable (set) each OPTNAME; the -u flag\n"
+#~ "    unsets each OPTNAME.  The -q flag suppresses output; the exit\n"
+#~ "    status indicates whether each OPTNAME is set or unset.  The -o\n"
+#~ "    option restricts the OPTNAMEs to those defined for use with\n"
+#~ "    `set -o'.  With no options, or with the -p option, a list of all\n"
+#~ "    settable options is displayed, with an indication of whether or\n"
+#~ "    not each is set."
+#~ msgstr ""
+#~ "Obráti hodnoty premenných riadiacich voliteľné správanie.\n"
+#~ "    Voľba -s znamená zapnúť (nastaviť) naždého N�ZVU_VOĽBY;\n"
+#~ "    voľba -u ruší nastavenie každého N�ZVU_VOĽBY. Voľba -q\n"
+#~ "    potla�í výpis; stav ukon�enia indikuje, �i je každý N�ZOV_VOĽBY\n"
+#~ "    nastavený alebo nenastavený. Voľba -o obmedzuje N�ZOV_VOĽBY\n"
+#~ "    na tie, ktoré sú definované pre použitie so „set -o“. Bez volieb\n"
+#~ "    alebo s voľbou -p sa vypíše zoznam nastaviteľných volieb\n"
+#~ "    s ozna�ením, �i je každá nastavená alebo nenastavená."
+
+#~ msgid ""
+#~ "For each NAME, specify how arguments are to be completed.\n"
+#~ "    If the -p option is supplied, or if no options are supplied, "
+#~ "existing\n"
+#~ "    completion specifications are printed in a way that allows them to "
+#~ "be\n"
+#~ "    reused as input.  The -r option removes a completion specification "
+#~ "for\n"
+#~ "    each NAME, or, if no NAMEs are supplied, all completion "
+#~ "specifications."
+#~ msgstr ""
+#~ "Pre každý N�ZOV ur�í, koľko argumentov sa má doplniť.\n"
+#~ "    Ak je daná voľba -p alebo žiadne voľby, vypíšu sa existujúce    "
+#~ "špecifikácie doplnení v takom formáte, že je ich možné použiť na\n"
+#~ "    vstupe. Voľba -r odstráni špecifikáciu doplnenia pre každý N�ZOV,\n"
+#~ "    alebo, ak nebol uvedený žiadny N�ZOV, pre všetky špecifikácie."
diff --git a/po/sl.gmo b/po/sl.gmo
new file mode 100644
index 0000000..db02245
--- /dev/null
+++ b/po/sl.gmo
diff --git a/po/sl.po b/po/sl.po
new file mode 100644
index 0000000..d1ad413
--- /dev/null
+++ b/po/sl.po
@@ -0,0 +1,5876 @@
+# Slovenian translation of bash.
+# Copyright (C) 2012 - 2013 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+#
+# Damir Jerovšek <damir.jerovsek@gmail.com>, 2012 - 2013.
+# Klemen Košir <klemen913@gmail.com>, 2012 - 2013.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: bash-4.2\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2013-03-09 20:21+0100\n"
+"Last-Translator: Klemen Košir <klemen913@gmail.com>\n"
+"Language-Team: Slovenian <translation-team-sl@lists.sourceforge.net>\n"
+"Language: sl\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=4; plural=(n%100==1 ? 1 : n%100==2 ? 2 : n%100==3 || n"
+"%100==4 ? 3 : 0);\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "slab podpis polja"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr ""
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: ni mogo�e pretvoriti zabeleženega polja v povezano polje"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: neveljaven klju� povezanega polja"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: ni mogo�e dodeliti v ne-števil�no kazalo"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr "%s: %s: treba je uporabiti podpis pri dodeljevanju povezanega polja"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: ni mogo�e ustvariti: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr ""
+"bash_execute_unix_command: ni mogo�e najti tipkovne razvrstitve za ukaz"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: prvi znak brez presledka ni `\"'"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "brez zaklju�ka `%c' v %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: manjka lo�ilnik dvopi�ja"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "`%s': ni mogo�e odvezati"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr ""
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr ""
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr ""
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "`%s': neveljaven vzdevek"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "urejanje vrstic ni omogo�eno"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "`%s': neveljavno ime tipkovne razvrstitve"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: ni mogo�e brati: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "`%s': neznano ime funkcije"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s ni vezan na nobeno tipko.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s se lahko pokli�e s pomo�jo "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "`%s': ni mogo�e odvezati"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "Å¡tevec zanke"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "smiselno samo v `for', `while', ali `until' zanki"
+
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Vrne vsebino trenutnega klica podprograma.\n"
+"    \n"
+"    Brez IZRAZA vrne \"$line $filename\".  Z IZRAZOM vrne\n"
+"    \"$line $subroutine $filename\"; ta dodaten podatek se lahko uporabi\n"
+"    za zagotovitev sledenja sklada.\n"
+"    \n"
+"    Vrednost IZRAZA nakazuje, koliko okvirjev klicev mora nazaj\n"
+"    pred trenutnega; zgornji okvir je okvir 0.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne 0, razen �e lupina ne izvršuje funkcije lupine ali pa IZRAZ\n"
+"    ni veljaven."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "HOME ni nastavljen"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "preve� argumentov"
+
+#: builtins/cd.def:342
+#, fuzzy
+msgid "null directory"
+msgstr "ni druge mape"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "OLDPWD ni nastavljen"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "vrstica %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "opozorilo: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: uporaba: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: možnost zahteva argument"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: zahtevan je Å¡tevni argument"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: ni mogo�e najti"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: neveljavna možnost"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: neveljavno ime možnosti"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "`%s': neveljavno dolo�ilo"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "neveljavno osmiško število"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "neveljavno šestnajstiško število"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "neveljavno Å¡tevilo"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: neveljavno dolo�ilo signala"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "`%s': ni dolo�ilo opravila ali neveljavno dolo�ilo posla"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: spremenljivka le za branje"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s izven dosega"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "argument"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s izven dosega"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: ni takšnega posla"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: ni nadzora posla"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "ni nadzora posla"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: omejeno"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "omejeno"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: ni vgrajena lupina"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "napaka med pisanjem: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "napaka med nastavljanjem atributov terminala: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "napaka med pridobivanjem atributov terminala: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: napaka med pridobivanjem trenutne mape: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: dvoumno dolo�ilo posla"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr ""
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: ni mogo�e ponastaviti: samo za branje %s"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: ni mogo�e ponastaviti"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: neveljavno ime dejanja"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: ni dolo�ila dopolnjevanja"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "Opozorilo: možnost -F morda ne bo delovala po pri�akovanjih"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "Opozorilo: možnost -C morda ne bo delovala po pri�akovanjih"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "trenutno se ne izvaja funkcija dopolnjevanja"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "se lahko uporabi samo v funkciji"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr ""
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr ""
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr ""
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, fuzzy, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "`%s': neveljaven vzdevek"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "ni mogo�e uporabiti `-f' za ustvarjanje funkcij"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: funkcija samo za branje"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr ""
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: na ta na�in ni mogo�e uni�iti spremenljivk polja"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: ni mogo�e pretvoriti povezanega polja v zabeleženo polje"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "dinami�no nalaganje ni na voljo"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "ni mogo�e odpreti predmeta v souporabi %s: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "ni mogo�e najti %s v predmetu v souporabi %s: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: ni dinami�no naloženo"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr ""
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: ni dinami�no naloženo"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: ni mogo�e izbrisati: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: je mapa"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: ni obi�ajna datoteka"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: datoteka je prevelika"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: ni mogo�e izvesti binarne datoteke"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: ni mogo�e izvesti: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "odjava\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "ni prijavna lupina: uporabite `exit'"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Obstajajo ustavljeni posli.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Obstajajo posli, ki se izvajajo.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "najdenega ni nobenega ukaza"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "dolo�ilo zgodovine"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: ni mogo�e odpreti za�asne datoteke: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "trenutno"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "posel %d se je pri�el brez nadzora"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: neveljavna možnost -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: možnost zahteva argument -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "razpršitev je onemogo�ena"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: razpršitvena razpredelnica je prazna\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "zadetki\tukaz\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Klju�nih besed, ki se ujemajo z ukazi lupine `"
+msgstr[1] "Klju�na beseda, ki se ujema z ukazi lupine `"
+msgstr[2] "Klju�ni besedi, ki se ujemata z ukazi lupine `"
+msgstr[3] "Klju�ne besede, ki se ujemajo z ukazi lupine `"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"nobena tema pomo�i se ne ujema s `%s'.  Poskusite `help help' ali `man -k "
+"%s' ali `info %s'."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: ni mogo�e odpreti: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Ti ukazi lupine so dolo�eni znotraj lupine. Vpišite `help' za prikaz tega "
+"seznama.\n"
+"Vpišite `help ime', �e želite izvedeti ve� o `imenu' funkcije.\n"
+"Uporabite `info bash', �e želite izvedeti ve� o lupini na splošno.\n"
+"Uporabite `man -k' ali `info', �e želite izvedeti ve� o ukazih, ki niso na "
+"tem seznamu.\n"
+"\n"
+"Zvezdica (*) poleg imena pomeni, da je ukaz onemogo�en.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "ni mogo�e uporabiti ve� kot eno od -anrw"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "položaj zgodovine"
+
+#: builtins/history.def:340
+#, fuzzy, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: neveljavno ime možnosti"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: razširitev zgodovine je spodletela"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: inlib je spodletel"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "druge možnosti niso dovoljene z `-x'"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: argumenti morajo biti dolo�ila opravila ali posla"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Neznana napaka"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "izraz je bil pri�akovan"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: ni zabeleženo polje"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: neveljavno dolo�ilo opisnika datoteke"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: neveljaven opisnik datoteke: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: neveljavno Å¡tetje vrstic"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: neveljaven izvor polja"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: neveljaven del povratnega klica"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "prazno ime spremenljivke polja"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "potrebna podpora spremenljivke polja"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "`%s': manjka znak oblike"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "`%c': neveljavno dolo�ilo vrste �asa"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "`%c': neveljaven znak oblike"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "opozorilo: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr ""
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "manjka šestnajstiška števka za \\x"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "manjka Å¡tevka s podporo unicode za \\%c"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "ni druge mape"
+
+#: builtins/pushd.def:360
+#, fuzzy, c-format
+msgid "%s: invalid argument"
+msgstr "%s: neveljaven argument omejitve"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<ni trenutne mape>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "sklad mape je prazen"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "kazalo sklada mape"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Prikaže seznam trenutno pomnjenih map.  Mape\n"
+"    so prikazane na seznamu z ukazom `pushd'; na vrh\n"
+"    seznama se lahko vrnete z ukazom `popd'.\n"
+"    \n"
+"    Možnosti:\n"
+"      -c\tizbriši sklad mape z brisanjem vseh elementov\n"
+"      -l\tne izpiši sorodnih map s predpono `~'  v mojo doma�o mapo\n"
+"      -p\tizpiši sklad mape z enim vnosom v vrstici\n"
+"      -v\tizpiši sklad mape z enim vnosom v vrstici z dolo�enim\n"
+"    \tpoložajem v skladu\n"
+"    \n"
+"    Argumenti:\n"
+"      +N\tPrikaže Nti vnos s štetjem z leve strani seznama, prikazan s\n"
+"    \tpomo�jo map, ko kli�emo brez možnosti, za�enši z ni�.\n"
+"    \n"
+"      -N\tPrikaže Nti vnos s štetjem z desne strani seznama, prikazan s\n"
+"\tpomo�jo map, ko kli�emo brez možnosti, za�enši z ni�."
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Doda mapo na vrh sklada mape ali zavrti\n"
+"    sklad, kar spremeni nov vrh sklada v trenutno delovno\n"
+"    mapo.  Če je brez argumentov, se izmenjata najvišji mapi.\n"
+"    \n"
+"    Možnosti:\n"
+"      -n\tPrepre�uje obi�ajno spremembo mape pri dodajanju\n"
+"    \tmap na sklad, tako se obdeluje le sklad.\n"
+"    \n"
+"    Argumenti:\n"
+"      +N\tZavrti sklad tako, da je N-ta mapa (Å¡tetje\n"
+"    \tz leve strani seznama, prikazano z `dirs', za�enši z\n"
+"    \tni�) na vrhu.\n"
+"    \n"
+"      -N\tZavrti sklad tako, da je N-ta mapa (Å¡tetje\n"
+"    \tz desne strani seznama, prikazano z `dirs', za�enši z\n"
+"    \tni�) na vrhu.\n"
+"    \n"
+"      dir\tDoda DIR skladu mape na vrhu, kar jo spremeni v\n"
+"    \tnovo trenutno delovno mapo.\n"
+"    \n"
+"    Ukaz lupine `dirs' prikaže sklad map."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Odstrani vnose iz sklada map.  ÄŒe je brez argumentov, odstrani\n"
+"    najvišjo mapo iz sklada in spremeni v novo mapo na vrhu.\n"
+"    \n"
+"    Možnosti:\n"
+"      -n\tPrepre�uje obi�ajno spremembo mape pri dodajanju\n"
+"    \tmap iz sklada, tako se obdeluje le sklad.\n"
+"    \n"
+"    Argumenti:\n"
+"      +N\tOdstrani N-ti vnos s Å¡tetjem z leve strani seznama,\n"
+"    \tprikazano z `dirs', za�enši z ni�.  Na primer: `popd +0'\n"
+"    \todstrani prvo mapo, `popd +1' odstrani drugo.\n"
+"    \n"
+"      -N\tOdstrani N-ti vnos s Å¡tetjem z desne strani seznama,\n"
+"    \tprikazano z `dirs', za�enši z ni�.  Na primer: `popd +0'\n"
+"    \todstrani zadnjo mapo, `popd -1' odstrani predzadnjo.\n"
+"    \n"
+"    Ukaz lupine `dirs' prikaže sklad map."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: neveljavno dolo�ilo �asovne omejitve"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "napaka med branjem: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr "`return' lahko vrne samo iz funkcije ali skripte z izvorno kodo"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "ni mogo�e ponastaviti funkcije in spremenljivke hkrati"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: ni spremenljivka polja"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: ni funkcija"
+
+#: builtins/setattr.def:194
+#, fuzzy, c-format
+msgid "%s: cannot export"
+msgstr "%s: ni mogo�e ponastaviti"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "Å¡tetje premika"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "ni mogo�e nastaviti in ponastaviti možnosti lupine hkrati"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: neveljavno ime možnosti lupine"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "zahtevan je argument imena datoteke"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: datoteke ni mogo�e najti"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "ni mogo�e dati v pripravljenost"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "prijavne lupine ni mogo�e dati v pripravljenost"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s je drugo ime za `%s'\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s je klju�na beseda lupine\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s je funkcija\n"
+
+#: builtins/type.def:299
+#, fuzzy, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s je vgrajena lupina\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s je vgrajena lupina\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s je %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s je razpršeno (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: neveljaven argument omejitve"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "`%c': slab ukaz"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: ni mogo�e dobiti omejitve: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "omejitev"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: ni mogo�e spremeniti omejitve: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "osmiško število"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "`%c': neveljaven operator simbolnega na�ina"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "`%c': neveljaven znak simbolnega na�ina"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " vrstica "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "zadnji ukaz: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Prekinjanje ..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr ""
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "neznana napaka ukaza"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "slaba vrsta ukaza"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "slab povezovalnik"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "slab skok"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: nedolo�ena spremenljivka"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\apotekla je �asovna omejitev med �akanjem na vnos: samodejna odjava\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "ni mogo�e preusmeriti obi�ajnega vnosa iz /dev/null: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "TIMEFORMAT: `%c': neveljaven znak oblike"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr ""
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "napaka cevi"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: omejeno: ni mogo�e dolo�iti `/' v imenih ukaza"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: ukaza ni mogo�e najti"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: slab tolma�"
+
+#: execute_cmd.c:5891
+#, fuzzy, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: ni mogo�e izvesti binarne datoteke"
+
+#: execute_cmd.c:5977
+#, fuzzy, c-format
+msgid "`%s': is a special builtin"
+msgstr "%s je vgrajena lupina\n"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "ni mogo�e podvajati fd %d v fd %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "stopnja rekurzivnosti izraza presežena"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "prekora�itev spodnje meje sklada rekurzivnosti"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "skladenjska napaka v izrazu"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "poskus dodelitve ne-spremenljivki"
+
+#: expr.c:530
+#, fuzzy
+msgid "syntax error in variable assignment"
+msgstr "skladenjska napaka v izrazu"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "delitev z 0"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "hroš�: slab žeton expassign"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "`:' pri�akovano za pogojni izraz"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "eksponent je manjši kot 0"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "po predhodnem ve�anju ali manjšanju je pri�akovano dolo�ilo"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "manjka `)'"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "skladenjska napaka: pri�akovan operand"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "skladenjska napaka: neveljaven aritmeti�ni operand"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (žeton napake je \"%s\")"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "neveljavna aritmeti�na zbirka"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: neveljavno Å¡tetje vrstic"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "vrednost je prevelika za zbirko"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: napaka izraza\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: ni mogo�e dostopati do nadrejenih map"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "ni mogo�e ponastaviti na�ina brez zakasnitve za fd %d"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr "ni mogo�e dodeliti opisnika novih map za vnos bash iz fd %d"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input: medpomnilnik že obstaja za nov fd %d"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: cev pgrp"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "razvejen id opravila %d se pojavi v izvajajo�em se poslu %d"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "brisanje ustavljenega posla %d s skupino opravila %ld"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process: id opravila %5ld (%s) je ozna�en kot še živ"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: ni takšnega dolo�ila opravila"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Signal %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Kon�ano"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Zaustavljeno"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Zaustavljeno(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "Se izvaja"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Kon�ano(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Kon�aj %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Neznano stanje"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(izpis jedra) "
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (wd: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "podrejeno opravilo setpgid (%ld v %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: opravilo z id %ld ni podrejeno opravilo te lupine"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: ni zapisov o opravilu %ld"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: posel %d je zaustavljen"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: ni takšnega posla"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: posel je uni�en"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: posel %d se že izvaja v ozadju"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr "waitchld: vklop WNOHANG za prepre�itev nedolo�enosti bloka"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: vrstica %d: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (izpis jedra)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(wd zdaj: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: getpgrp je spodletel"
+
+#: jobs.c:4447
+#, fuzzy
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: vrsti�na disciplina"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: vrsti�na disciplina"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "ni mogo�e nastaviti skupine opravil terminala (%d)"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "brez nadzora posla v tej lupini"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: spodletela trditev: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d: trditev je bila slabo izpeljana\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "neznano"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: vsebina bloka na prostem seznamu je bila prepisana"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: poklican z že sproš�enim argumentom bloka"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: klic z nedodeljenim argumentom bloka"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: zaznana prekora�itev spodnje meje; mh_nbytes je izven dosega"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: zaznana prekora�itev spodnje meje; mh_nbytes je izven dosega"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr ""
+"free: velikosti za�etnih in kon�nih podatkovnih kosov \"chunk\" se "
+"razlikujejo"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: klic z nedodeljenim argumentom bloka"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc: zaznana prekora�itev spodnje meje; mh_nbytes je izven dosega"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc: zaznana prekora�itev spodnje meje; mh_nbytes je izven dosega"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr ""
+"realloc: velikosti za�etnih in kon�nih podatkovnih kosov \"chunk\" se "
+"razlikujejo"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: je dodelitvena razpredelnica polna z FIND_ALLOC?\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: je %p že v razpredelnici kot dodeljen?\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: je %p že v razpredelnici kot prost?\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "neveljavna zbirka"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: gostitelj je neznan"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: neveljavna storitev"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: slabo dolo�ilo omrežne poti"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "omrežno opravilo ni podprto"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: ni mogo�e spremeniti jezikovne oznake (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: ni mogo�e spremeniti jezikovne oznake (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: ni mogo�e spremeniti jezikovne oznake (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: ni mogo�e spremeniti jezikovne oznake (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "Imate pošto v $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "Imate novo pošto v $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "Pošta v %s je bila prebrana\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "skladenjska napaka: potreben je aritmeti�ni izraz"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "skladenjska napaka: `;' nepri�akovano"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "skladenjska napaka: `((%s))'"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: slaba vrsta navodila %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr "here-document v vrstici %d razmejen z end-of-file (želeno `%s')"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr "make_redirection: navodilo preusmeritve `%d' je izven dosega"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr ""
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "nepri�akovan konec datoteke med iskanjem ujemanja z `%c'"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "nepri�akovan konec datoteke med iskanjem ujemanja z `]]'"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "skladenjska napaka v pogojnem izrazu: nepri�akovan žeton `%s'"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "skladenjska napaka v pogojnem izrazu"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "nepri�akovan žeton `%s', pri�akovan je bil `)'"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "pri�akovan `)'"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "nepri�akovan argument `%s' do pogojnega enoslovnega operatorja"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "nepri�akovan argument do pogojnega enoslovnega operatorja"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "nepri�akovan žeton `%s', pri�akovan je binarni pogojni operator"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "pri�akovan je binarni pogojni operator"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "nepri�akovan argument `%s' do pogojnega binarnega operatorja"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "nepri�akovan argument do pogojnega binarnega operatorja"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "nepri�akovan žeton `%c' v pogojnem ukazu"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "nepri�akovan žeton `%s' v pogojnem ukazu"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "nepri�akovan žeton %d v pogojnem ukazu"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "skladenjska napaka blizu nepri�akovanega žetona `%s'"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "skladenjska napaka blizu `%s'"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "skladenjska napaka: nepri�akovan konec datoteke"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "skladenjska napaka"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Uporabite \"%s\", �e želite zapustiti lupino.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "nepri�akovan konec datoteke med iskanjem ujemanja z `)'"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "kon�ano: funkcije `%s' ni mogo�e najti"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr ""
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: NULL COMPSPEC"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: slab povezovalnik `%d'"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: neveljaven opisnik datoteke"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: prazen kazalec datoteke NULL"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != fileno xtrace fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: `%c': neveljaven znak oblike"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "opisnik datoteke je izven dosega"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: dvoumna preusmeritev"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: ni mogo�e prepisati obstoje�e datoteke"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: omejitev: ni mogo�e preusmeriti izhoda"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "ni mogo�e ustvariti za�asne datoteke za here-document: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: ni mogo�e dodeliti fd spremenljivki"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "/dev/(tcp|udp)/host/port ni podprt brez omrežja"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "napaka preusmeritve: ni mogo�e podvajati fd"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "ni mogo�e najti /tmp, ustvarite ga!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp mora biti veljavno ime mape"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr ""
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: neveljavna možnost"
+
+#: shell.c:1319
+#, fuzzy, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "ni mogo�e ponastaviti na�ina brez zakasnitve za fd %d"
+
+#: shell.c:1330
+#, fuzzy, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "ni mogo�e ponastaviti na�ina brez zakasnitve za fd %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr ""
+
+#: shell.c:1632
+#, fuzzy, c-format
+msgid "%s: Is a directory"
+msgstr "%s: je mapa"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "Ni imena!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, razli�ica %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Uporaba:\t%s [dolga možnost GNU] [možnost] ...\n"
+"\t%s [dolga možnost GNU] [možnost] skriptni dokument ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "Dolge možnosti GNU:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Možnosti lupine:\n"
+
+#: shell.c:2043
+#, fuzzy
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-irsD ali ukaz -c  ali -O shopt_option\t\t(samo sklicevanje)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s ali možnost -o\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr "Vpišite `%s -c \"help set\"' za ve� podrobnosti o možnostih lupine.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr "Vpišite `%s -c help' za ve� podrobnosti o možnostih ukazov lupine.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "Uporabite ukaz `bashbug' za poro�anje hroš�ev.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr ""
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr ""
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: neveljavno opravilo"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Lažen signal"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Odloži"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Prekini"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Kon�aj"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Neveljaven ukaz"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "BPT trace/trap"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "ukaz ABORT"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "ukaz EMT"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Izjema s plavajo�o vejico"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Uni�en"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Napaka vodila"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Napaka segmentacije"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Slab sistemski klic"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Prekinjena cev"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Budilka"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Zaklju�en"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Nujen pogoj IO"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Ustavljen (signal)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Nadaljuj"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Podrejeno opravilo je uni�eno ali zaustavljeno"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Ustavljen (vhod TTY)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Ustavljen (izhod TTY)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "I/O je pripravljen"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "omejitev CPE"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "omejitev datoteke"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Budilka (navidezna)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Budilka (profil)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Okno se je spremenilo"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Zaklep zapisa"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Signal uporabnika 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Signal uporabnika 2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "vnos podatkov HFT je na �akanju"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "izpad elektri�nega toka je neizbežen"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "sesutje sistema je neizbežno"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "preseli opravilo na drug CPE"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "napaka programiranja"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "na�in nadzora HFT je odobren"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "na�in nadzora HFT je umaknjen"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "zaporedje zvoka HFT je kon�ano"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "zahteva po podatkih"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "Neznan signal #%d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "slaba zamenjava: ni zaklju�ka `%s' v %s"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: ni mogo�e dodeliti seznama �lanu polja"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "ni mogo�e ustvariti cevi za zamenjavo opravila"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "ni mogo�e ustvariti podrejenega opravila za zamenjavo opravila"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "ni mogo�e odpreti imenovane cevi %s za branje"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "ni mogo�e odpreti imenovane cevi %s za pisanje"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "ni mogo�e podvajati imenovane cevi %s kot fd %d"
+
+#: subst.c:6213
+#, fuzzy
+msgid "command substitution: ignored null byte in input"
+msgstr "slaba zamenjava: ni zaklju�ka \"`\" v %s"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "ni mogo�e ustvariti cevi za zamenjavo ukaza"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "ni mogo�e ustvariti podrejenega opravila za zamenjavo ukaza"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute: ni mogo�e podvajati cevi kot fd 1"
+
+#: subst.c:6883 subst.c:9952
+#, fuzzy, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: %s: neveljavna vrednost za opisnik sledenja datotek"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, fuzzy, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: neveljavno Å¡tetje vrstic"
+
+#: subst.c:7013 subst.c:7177
+#, fuzzy, c-format
+msgid "%s: invalid variable name"
+msgstr "`%s': neveljaven vzdevek"
+
+#: subst.c:7256
+#, fuzzy, c-format
+msgid "%s: parameter not set"
+msgstr "%s: parameter je prazen ali pa ni dolo�en"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: parameter je prazen ali pa ni dolo�en"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: izraz podniza < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: slaba zamenjava"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: ni mogo�e dodeliti na tak na�in"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+"prihodnje razli�ice lupine bodo prisilile ocenitev kot aritmeti�no zamenjavo"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "slaba zamenjava: ni zaklju�ka \"`\" v %s"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "ni ujemanja: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "pri�akovan je argument"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: pri�akovan je izraz celega števila"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "pri�akovan je `)'"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "pri�akovan je `)', najden je %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: pri�akuje se binarni operator"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: pri�akuje se enosnoven operator"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "manjka `]'"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "skladenjska napaka: `;' nepri�akovano"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "neveljavna Å¡tevka signala"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr ""
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: slaba vrednost v trap_list[%d]: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps: ro�nik signala je SIG_DFL, ponovno pošiljanje %d (%s) sebi"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: slab signal %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "napaka med uvozom dolo�ila funkcije `%s'"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "raven lupine (%d) je previsoka, ponastavljanje na 1"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: v trenutnem dosegu ni vsebine funkcije"
+
+#: variables.c:2693
+#, fuzzy, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: ni mogo�e dodeliti fd spremenljivki"
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr ""
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: v trenutnem dosegu ni vsebine funkcije"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s ima prazen exportstr"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "neveljaven znak %d v exportstr za %s"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "ni `=' v exportstr za %s"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr "pop_var_context: glava shell_variables ni vsebina funkcije"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: ni vsebine global_variables"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr "pop_scope: glava shell_variables ni trenuten obseg okolja"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: ni mogo�e odpreti kot DATOTEKO"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: neveljavna vrednost za opisnik sledenja datotek"
+
+#: variables.c:6437
+#, fuzzy, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s izven dosega"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Avtorske pravice (C) 2009 Free Software Foundation, Inc.\n"
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"Dovoljenje GPLv3+: GNU GPL razli�ica 3 ali poznejše <http://gnu.org/licenses/"
+"gpl.html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, razli�ica %s (%s)\n"
+
+#: version.c:91 version2.c:91
+#, fuzzy
+msgid "This is free software; you are free to change and redistribute it."
+msgstr "To je prosta programska oprema; lahko jo spreminjate in razširjate.\n"
+
+#: version.c:92 version2.c:92
+#, fuzzy
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "Je BREZ KAKRÅ NEKOLI GARANCIJE, v obsegu, ki ga dovoljuje zakonodaja.\n"
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: ni mogo�e dodeliti %lu bajtov (%lu bajtov je dodeljenih)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: ni mogo�e dodeliti %lu bajtov"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: ni mogo�e dodeliti %lu bajtov (%lu bajtov dodeljenih)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: ni mogo�e dodeliti %lu bajtov"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [ime[=vrednost] ... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] ime [ime ...]"
+
+#: builtins.c:53
+#, fuzzy
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpvsPVS] [-m tipk_razvrstitev] [-f ime_dat] [-q ime] [-u ime] [-r "
+"tipk_zaporedje] [-x tipk_zaporedje:ukaz_lupine] [tipk_zaporedje:"
+"funkcija_brane_vrstice ali ukaz_brane_vrstice]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [vgrajena_lupina [arg ...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [izraz]"
+
+#: builtins.c:66
+#, fuzzy
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]]] [mapa]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "ukaz [-pVv] ukaz [arg ...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilrtux] [-p] [ime[=vrednost] ...]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilrtux] [-p] ime[=vrednost] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [možnost] ime[=vrednost] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [arg ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [arg ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f ime_datoteke] [ime ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [arg ...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts niz_možnosti ime[arg]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a ime] [ukaz [argumenti ...]] [preusmeritev ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr ""
+"fc [-e ime_urejevalnika] [-lnr] [prvi] [zadnji] ali fc -s [vzorec=zamenjava] "
+"[ukaz]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [dolo�ilo_posla]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [dolo�ilo_posla ...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p ime_poti] [-dt] [ime ...]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [vzorec ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d odmik] [n] ali history -anrw [ime_datoteke] ali history -ps "
+"arg [arg...]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [dolo�ilo_posla ...] ali jobs -x ukaz [argumenti]"
+
+#: builtins.c:131
+#, fuzzy
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [dolo�ilo_posla ...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s dolo�ilo_signala | -n št_signala | -dolo�ilo_signala] pid | "
+"dolo�ilo_posla ... ali kill -l [dolo�ilo_signala]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let arg [arg ...]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a polje] [-d razmejilnik] [-i besedilo] [-n n-znakov] [-N n-"
+"znakov] [-p poziv] [-t �asovna_omejitev] [-u fd] [ime ...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o ime_možnosti] [--] [arg ...]"
+
+#: builtins.c:144
+#, fuzzy
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [ime ...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [ime[=vrednost] ...] ali export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [ime[=vrednost] ...] ali readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source ime_datoteke [argumenti]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". ime_datoteke [argumenti]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [izraz]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ arg... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[arg] dolo�ilo_signala ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] ime [ime ...]"
+
+#: builtins.c:171
+#, fuzzy
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHacdefilmnpqrstuvx] [meja]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [na�in]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [id]"
+
+#: builtins.c:181
+#, fuzzy
+msgid "wait [pid ...]"
+msgstr "wait [id_opravila]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for IME [in IMENA ... ] ; do UKAZI; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( izraz1; izraz2; izraz3 )); do UKAZI; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select IME [in IMENA ... ;] do UKAZI; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] cevovod"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case IME in [VZOREC [| VZOREC]...) UKAZI ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if UKAZI; then UKAZI; [ elif UKAZI; then UKAZI; ]... [ else UKAZI; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while UKAZI; do UKAZI; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until UKAZI; do UKAZI; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [IME] ukaz [preusmeritve]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function ime { UKAZI ; } ali ime () { UKAZI ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ UKAZI ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "dolo�ilo_posla [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( izraz ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ izraz ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "spremenljivke - Imena in pomeni nekaterih spremenljivk lupine"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | mapa]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [ime_možnosti ...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v spremenljivka] oblika [argumenti]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DE] [-o možnost] [-A dejanje] [-G "
+"krajevni_vzorec] [-W seznam_besed]  [-F funkcija] [-C ukaz] [-X "
+"filtrirni_vzorec] [-P predpona] [-S pripona] [ime ...]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o možnost]  [-A dejanje] [-G krajevni_vzorec] [-W "
+"seznam_besed]  [-F funkcija] [-C ukaz] [-X filtrirni_vzorec] [-P predpona] [-"
+"S pripona] [beseda]"
+
+#: builtins.c:239
+#, fuzzy
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o možnost] [-DE] [ime ...]"
+
+#: builtins.c:242
+#, fuzzy
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-n Å¡tevec] [-O izvor] [-s Å¡tevec] [-t] [-u fd] [-C povratni_klic] [-"
+"c del] [polje]"
+
+#: builtins.c:244
+#, fuzzy
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-n Å¡tevec] [-O izvor] [-s Å¡tevec] [-t] [-u fd] [-C povratni_klic] "
+"[-c del] [polje]"
+
+#: builtins.c:256
+#, fuzzy
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Dolo�i ali prikaže vzdevke.\n"
+"    \n"
+"    Če je `alias' brez argumentov, izpiše seznam vzdevkov v obliki za\n"
+"    ve�kratno uporabo `alias IME=VREDNOST' na standardnem izpisu.\n"
+"    \n"
+"    V nasprotnem primeru je za vsako IME dolo�en vzdevek, �igar\n"
+"    VREDNOST je podana.\n"
+"    Vmesni presledni znak v VREDNOSTI povzro�i, da naslednjo\n"
+"    besedo preveri za zamenjavo vzdevka, ko je ta razširjen.\n"
+"    \n"
+"    Možnosti:\n"
+"      -p\tIzpiši  vse dolo�ene vzdevke v obliki za ve�kratno uporabo\n"
+"    \n"
+"    Status kon�anja:\n"
+"    vzdevek vrne pravilno,  razen �e je predloženo IME, za katero ni\n"
+"    bil dolo�en noben vzdevek."
+
+#: builtins.c:278
+#, fuzzy
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Odstrani vsako IME s seznama dolo�enih vzdevkov.\n"
+"    \n"
+"    Možnosti:\n"
+"      -a\todstrani vsa dolo�ila vzdevkov.\n"
+"    \n"
+"    Vrne pravilno, razen �e IME ni obstoje� vzdevek."
+
+#: builtins.c:291
+#, fuzzy
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"Nastavi tipkovne bližnjice in spremenljivke funkcije Readline.\n"
+"    \n"
+"    Veže zaporedje tipk na funkcijo Readline ali makro ali nastavi\n"
+"    spremenljivko Readline. Skladnja argumenta brez možnosti\n"
+"    je enakovredna najdbi v ~/.inputrc, vendar mora biti podana\n"
+"    kot en argument:\n"
+"    na primer, bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Možnosti:\n"
+"      -m tipk_razvr Uporabi TIPK_RAZVR kot tipkovno razvrstitev za �as "
+"trajanja\n"
+"                         tega ukaza. Sprejemljiva imena tipkovnih "
+"razvrstitev so emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command in vi-insert.\n"
+"      -l Prikaži imena funkcij.\n"
+"      -P Prikaži imena funkcij in tipkovne bližnjice.\n"
+"      -p Prikaži imena funkcij in tipkovne bližnjice v obliki, ki se lahko\n"
+"                         ponovno uporabi kot vnos.\n"
+"      -S Prikaži tipkovna zaporedja, ki se sklicujejo na makre in njihove "
+"vrednosti.\n"
+"      -s Prikaži tipkovna zaporedja, ki se sklicujejo na makre in njihove "
+"vrednosti\n"
+"                         v obliki, ki se lahko ponovno uporabi kot vnos.\n"
+"      -V Prikaži imena spremenljivk in vrednosti\n"
+"      -v Prikaži imena spremenljivk in vrednosti v obliki, ki se lahko\n"
+"                         ponovno uporabi kot vnos.\n"
+"      -q ime_funkcije Poizvedi, katere tipke se sklicujejo na imenovano "
+"funkcijo.\n"
+"      -u ime_funkcije Odveži vse tipke, ki se vežejo na imenovano funkcijo.\n"
+"      -r zaporedje_tipk Odstrani vez za ZAPOREDJE_TIPK.\n"
+"      -f ime_datoteke Beri tipkovne bližnjice iz IME_DATOTEKE.\n"
+"      -x zaporedje_tipk:ukaz_lupine\tPovzro�i, da se UKAZ_LUPINE izvrši,\n"
+"    \t\t\t\tko je vnešeno ZAPOREDJE_TIPK.\n"
+"    \n"
+"    Status kon�anja:\n"
+"    bind vrne 0, razen, �e je dana neprepoznana možnost ali se pojavi napaka."
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Kon�a zanko for, while ali until.\n"
+"    \n"
+"    Kon�aj zanko FOR, WHILE ali UNTIL.  Če je N podan, prekini N obdanih\n"
+"    zank.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Stanje kon�anja je 0, razen �e N ni ve�ji kot ali enak 1."
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Nadaljuje zanko for, while ali until.\n"
+"    \n"
+"    Nadaljuje naslednjo ponovitev obdane zanke FOR, WHILE ali UNTIL.\n"
+"    ÄŒe je N podan, nadaljuje N-to obdano zanko.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Stanje kon�anja je 0, razen �e N ni ve�ji kot ali enak 1."
+
+#: builtins.c:354
+#, fuzzy
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Izvede vgrajeno lupino.\n"
+"    \n"
+"    Izvede VGRAJENO_LUPINO z argumenti ARG brez opravljanja iskanja\n"
+"    ukaza. To je uporabno, ko želite ponovno izvesti vgrajeno lupino\n"
+"    kot funkcijo lupine, vendar bi radi izvedli vgrajeno lupino znotraj "
+"funkcije.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne stanje kon�anja VGRAJENE_LUPINE ali napak, �e VGRAJENA_LUPINA\n"
+"    ni vgrajena lupina .."
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Vrne vsebino trenutnega klica podprograma.\n"
+"    \n"
+"    Brez IZRAZA vrne \"$line $filename\".  Z IZRAZOM vrne\n"
+"    \"$line $subroutine $filename\"; ta dodaten podatek se lahko uporabi\n"
+"    za zagotovitev sledenja sklada.\n"
+"    \n"
+"    Vrednost IZRAZA nakazuje, koliko okvirjev klicev mora nazaj\n"
+"    pred trenutnega; zgornji okvir je okvir 0.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne 0, razen �e lupina ne izvršuje funkcije lupine ali pa IZRAZ\n"
+"    ni veljaven."
+
+#: builtins.c:387
+#, fuzzy
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"Spremeni delovno mapo lupine.\n"
+"    \n"
+"    Spremeni trenutno mapo v DIR. Privzet DIR je vrednost spremenljivke\n"
+"    lupine HOME.\n"
+"    \n"
+"    Spremenljivka CDPATH dolo�a iskalno pot za mapo, ki vsebuje DIR.\n"
+"    Nadomestna imena map v CDPATH so lo�ena z dvopi�jem (:).\n"
+"    Prazno ime mape se ena�i s trenutno mapo.  Če se DIR za�ne\n"
+"    s poševnico (/), potem se CDPATH ne uporabi.\n"
+"    \n"
+"    Če mapa ni najdena in je možnost lupine `cdable_vars' dolo�ena,\n"
+"    se predvideva, da je beseda ime spremenljivke. ÄŒe spremenljivka\n"
+"    ima vrednost, se le-ta uporabi za DIR.\n"
+"    \n"
+"    Možnosti:\n"
+"        -L\tprisili sledenje simbolnim povezavam\n"
+"        -P\tuporabi fizi�no strukturo map brez sledenja simbolnim\n"
+"    \tpovezavam\n"
+"        -e\t�e je možnost -P predložena in trenutne delovne mape\n"
+"    \tni mogo�e uspešno dolo�iti, kon�aj z ne-ni�elnim stanjem\n"
+"    \n"
+"    Sledenje simbolnim povezavam je privzeto, kot �e bi možnost `-L'\n"
+"    bila predložena\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne 0, �e je mapa spremenjena in �e je $PWD uspešno nastavljen, kadar\n"
+"    je uporabljena možnost -P; druga�e je ne-ni�elna vrednost"
+
+#: builtins.c:425
+#, fuzzy
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"Izpiše ime trenutne delovne mape.\n"
+"    \n"
+"    Možnosti:\n"
+"      -L\tprikaže vrednost $PWD, �e imenuje trenutno delovno\n"
+"    \tmapo\n"
+"      -P\tprikaže fizi�no mapo brez vsakršnih simbolnih povezav\n"
+"    \n"
+"    Privzeto se `pwd\" obnaša, kot �e bi možnost `-L ' bila dolo�ena.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne 0, razen �e je dana neveljavna možnost ali pa trenutne mape\n"
+"    ni mogo�e prebrati."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Prazen ukaz.\n"
+"    \n"
+"    Brez u�inka; ukaz ne naredi ni�esar.\n"
+"    \n"
+"     Stanje kon�anja:\n"
+"     Vedno uspešno."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Vrne uspešen rezultat.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vedno uspešno."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Vrne neuspešen rezultat.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vedno neuspešno."
+
+#: builtins.c:471
+#, fuzzy
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Izvede preprost ukaz ali prikaže podrobnosti o ukazih.\n"
+"    \n"
+"    Zažene UKAZ z ARGUMENTI in zavira iskanje funkcije lupine ali prikaže\n"
+"    podrobnosti o dolo�enih UKAZIH.  Lahko se uporabi za klic ukazov\n"
+"    na disku, kadar obstaja funkcija z enakim imenom.\n"
+"    \n"
+"    Možnosti:\n"
+"      -p\tuporabi privzeto vrednost za POT, ki bo zagotovo našla vse\n"
+"    \tstandardne pripomo�ke\n"
+"      -v\tprikaži opis UKAZA, podobno kot vgrajena lupina `type'\n"
+"      -V\tprikaži bolj podrobni izpis vsakega UKAZA\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne stanje kon�anja UKAZA ali neuspešno, �e UKAZA ni mogo�e najti."
+
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"Nastavi vrednosti spremenljivk in atributov.\n"
+"    \n"
+"    Deklarira spremenljivke in jim da atribute. ÄŒe ni podanih IMEN,\n"
+"    prikaže atribute in vrednosti vseh spremenljivk.\n"
+"    \n"
+"    Možnosti:\n"
+"      -f\tomeji ukrep ali prikaži imena funkcij in dolo�ilom\n"
+"      -F\tomeji prikaz samo imen funkcij (ter Å¡tevilo vrstice in\n"
+"    \tizvorno datoteko, kadar je dejavno razhroš�evanje)\n"
+"      -g\tustvari splošne spremenljivke, kadar so uporabljene v funkciji\n"
+"    \tlupine; v nasprotnem primeru je prezrto\n"
+"      -p\tprikaži atribute in vrednost vsakega IMENA\n"
+"    \n"
+"    Možnosti, ki dolo�ajo atribute\n"
+"      -a\tda so IMENA zabeležena polja (�e je podprto)\n"
+"      -A\tda so IMENA povezana polja (�e je podprto)\n"
+"      -i\tda imajo IMENA atribute celih Å¡tevil `integer'\n"
+"      -l\tda se IMENA pretvorijo v male �rke pri dodelitvi\n"
+"      -r\tda so IMENA samo za branje\n"
+"      -t\tda imajo IMENA atribut sledenja `trace'\n"
+"      -u\tda se IMENA pretvorijo v velike �rke pri dodelitvi\n"
+"      -x\tda se IMENA izvozijo\n"
+"    \n"
+"    Uporaba `+' namesto `-'  izklopi dan atribut.\n"
+"    \n"
+"    Spremenljivkam z atributom celega števila se izvede aritmeti�no\n"
+"    vrednotenje (poglejte ukaz `let'), kadar je spremenljivki\n"
+"    dodeljena vrednost.\n"
+"    \n"
+"    Ko se uporabi v funkciji, `declare' naredi IMENA krajevna kot\n"
+"    pri ukazu `local'.  Možnost `-g' zavira to obnašanje.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, razen �e je predložena neveljavna možnost ali pride\n"
+"    do napake."
+
+#: builtins.c:532
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"Nastavi vrednosti spremenljivk in atributov.\n"
+"    \n"
+"    Zastarelo. Oglejte si `help declare'."
+
+#: builtins.c:540
+#, fuzzy
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Dolo�i krajevne spremenljivke.\n"
+"    \n"
+"    Ustvari krajevno spremenljivko z imenom IME in ji dodeli VREDNOST.\n"
+"    MOŽNOST je lahko katera koli, sprejeta z `declare'.\n"
+"    \n"
+"    Krajevne spremenljivke se lahko uporabijo samo znotraj funkcije;\n"
+"    vidne so samo funkciji, kjer so dolo�ene in njenim podprogramom.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, razen �e je predložena neveljavna možnost, pride\n"
+"    do napake ali pa lupina ne izvaja funkcije."
+
+#: builtins.c:557
+#, fuzzy
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Piše argumente na standardni izhod.\n"
+"    \n"
+"    Prikaže ARGUMENTE na standardnem izhodu, ki mu sledi nova vrstica.\n"
+"    \n"
+"    Možnosti:\n"
+"      -n\tne pripni nove vrstice\n"
+"      -e\tomogo�i tolma�enje naslednjih ubežnih levih poševnic\n"
+"      -E\tizrecno zatri tolma�enje ubežnih levih poševnic\n"
+"    \n"
+"    `echo' tolma�i naslednje znake ubežnih levih poševnic:\n"
+"      \\a\talarm (zvonec)\n"
+"      \\b\tvra�alka\n"
+"      \\c\tzatre nadaljni izpis\n"
+"      \\e\tubežni znak\n"
+"      \\f\tnova stran\n"
+"      \\n\tnova vrstica\n"
+"      \\r\tpomik na za�etek vrstice\n"
+"      \\t\tvodoravni tabulator\n"
+"      \\v\tnavpi�ni tabulator\n"
+"      \\[tab]leva poševnica\n"
+"      \\0nnn\tznak, katerega vrednost ASCII je NNN (osmiška).  NNN je lahko\n"
+"    \tod 0 do 3 osmiška števila\n"
+"      \\xHH\t8-bitni znak, katerega vrednost je HH (šestnajstiška).  HH\n"
+"    \tje lahko ena ali dve šestnajstiški števili\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, razen �e pride do napake pri pisanju."
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Piše argumente na standardni izhod.\n"
+"    \n"
+"    Prikaže ARGUMENTE na standardni izhod, temu sledi nova vrstica.\n"
+"    \n"
+"    Možnosti:\n"
+"      -n\tne pripni nove vrstice\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, razen �e pride do napake pri pisanju."
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"Omogo�i in onemogo�i vgrajene lupine.\n"
+"    \n"
+"    Omogo�i in onemogo�i ukaze vgrajene lupine.  Onemogo�enje dovoli\n"
+"    izvedbo ukaza diska, ki ima enako ime kot vgrajena lupina, brez\n"
+"    uporabe polnega imena poti.\n"
+"    \n"
+"    Možnosti:\n"
+"      -a\tprikaži seznam vgrajenih lupin, ki kaže, katera je omogo�ena\n"
+"      -n\tonemogo�i vsako IME ali pa prikaži seznam onemogo�enih\n"
+"    \tvgrajenih lupin\n"
+"      -p\tprikaži seznam vgrajenih lupin v obliki za ve�kratno uporabo\n"
+"      -s\tprikaži samo imena posebnih vgrajenih lupin `special'\n"
+"    \tpo POSIX standardu\n"
+"    \n"
+"    Možnosti, ki nadzorujejo dinami�no nalaganje:\n"
+"      -f\tnaloži IME iz predmeta IME_DATOTEKE v souporabi\n"
+"      -d\todstrani vgrajeno lupino, naloženo z -f\n"
+"    \n"
+"    Brez podanih možnosti je vsako IME omogo�eno.\n"
+"    \n"
+"    Za uporabo preizkusa 'test', najdenega v $PATH, in ne razli�ice\n"
+"    vgrajene lupine, vpišite `enable -n test'.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, razen �e IME ni vgrajena lupina ali �e pride do napake."
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Zažene argumente kot ukaze lupine.\n"
+"    \n"
+"    Združi ARGUMENTA v en niz, uporabi rezultat kot vnos v lupino\n"
+"    in zaženi kon�ne ukaze.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne stanje kon�anja ali uspešno, �e je ukaz prazen."
+
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"Raz�leni argumente možnosti.\n"
+"    \n"
+"    Getopts je uporabljen s strani postopkov lupine za raz�lenitev\n"
+"    položajnih parametrov  kot možnosti.\n"
+"    \n"
+"    NIZ_MOŽNOSTI vsebuje �rke možnosti za prepoznavo; �e dvopi�ju\n"
+"    sledi �rka, se za možnost pri�akuje dodeljen argument, ki mora\n"
+"    biti lo�en s preslednim znakom.\n"
+"    \n"
+"    Vsaki�, ko je klican, bo getopts postavil naslednjo možnost v\n"
+"    spremenljivko lupine $name, nastavil ime, �e še ne obstaja, in\n"
+"    kazalo naslednjega argumenta bo obdelano v spremenljivko\n"
+"    lupine OPTIND. OPTIND je nastavljen na 1 vsaki�, ko je lupina ali\n"
+"    skripta lupine poklicana. Ko možnost zahteva argument, ga\n"
+"    getopts premakne v spremenljivko lupine OPTARG. \n"
+"    \n"
+"    getopts poro�a napake na eden izmed dveh na�inov. Če je prvi\n"
+"    znak OPTSTRING dvopi�je, getopts uporabi tiho poro�anje napak.\n"
+"    V tem na�inu ni izpisanih sporo�il o napakah. Če je videna neveljavna\n"
+"    možnost, getopts postavi najden znak možnosti v OPTARG.  Če\n"
+"    zahtevan argument ni najden, getopts postavi ':' v IME in dodeli\n"
+"    OPTARG nadenemu znaku možnosti. Če getopts ni v tihem na�inu\n"
+"    in  je videnaneveljavna možnost, getopts postavi '?' v IME in\n"
+"    ponastavi OPTARG. ÄŒe zahtevan argument ni najden, je '?'\n"
+"    postavljen v IME, OPTARG je ponastavljen in prikazano je\n"
+"    diagnosti�no sporo�ilo.\n"
+"    \n"
+"    ÄŒe ima spremenljivka lupine OPTERR vrednost 0, getopts\n"
+"    onemogo�i prikaz sporo�il o napakah, tudi �e prvi znak OPTSTRING\n"
+"    ni dvopi�je. OPTERR ima privzeto vrednost 1.\n"
+"    \n"
+"    Getopts obi�ajno raz�leni položajne parametre ($0 - $9), toda �e je\n"
+"    danih ve� argumentov, se jih raz�leni.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, �e je možnost najdena; neuspešno, �e pride\n"
+"    do konca možnosti ali do napake."
+
+#: builtins.c:694
+#, fuzzy
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"Zamenja lupino z danim ukazom.\n"
+"    \n"
+"    Izvede UKAZ, ki zamenja to lupino z dolo�enim programom.\n"
+"    ARGUMENTI postanejo argumenti UKAZU. Če UKAZ ni dolo�en,\n"
+"    se vsaka preusmeritev uveljavi v trenutni lupini.\n"
+"    \n"
+"    Možnosti:\n"
+"      -a ime\tposreduj IME kot ni�ni argument UKAZU\n"
+"      -c\t\tizvedi UKAZ s praznim okoljem\n"
+"      -l\t\tpostavi pomišljaj v ni�ni argument UKAZU\n"
+"    \n"
+"    Če ukaza ni bilo mogo�e izvesti, se ne-vzajemna lupina kon�a, razen\n"
+"    �e je nastavljena možnost lupine `execfail' .\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, razen �e UKAZ ni najden ali pride do napake preusmeritve."
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Kon�a lupino.\n"
+"    \n"
+"    Kon�a lupino s stanjem N. Če je N izpuš�en, se uporabi stanje\n"
+"    kon�anja zadnjega izvršenega ukaza."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Kon�a prijavno lupino.\n"
+"    \n"
+"    Kon�a prijavno lupino s stanjem kon�anja N. Vrne napako, �e se\n"
+"    ne izvede v prijavni lupini."
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"Prikaže ali izvede ukaze s seznama zgodovine.\n"
+"    \n"
+"    fc se uporablja za seznam ali urejanje in ponovno izvajanje ukazov\n"
+"    s seznama zgodovine. PRVI in ZADNJI sta lahko števili, ki dolo�ata "
+"obseg\n"
+"    oz. PRVI je lahko niz, kar pomeni, da se nedavni ukaz za�ne s tem "
+"nizom.\n"
+"    \n"
+"    Možnosti:\n"
+"      -e IME_UREJEVALNIKA\tizbere urejevalnik za uporabo. Privzet je\n"
+"    \t\tFCEDIT, nato EDITOR, nato vi\n"
+"      -l \tprikaže vrstice namesto urejanja\n"
+"      -n\tzanemari Å¡tevilke vrstic med navedbo\n"
+"      -r\tobrni vrstni red vrstic (najnovejše so navedene prve)\n"
+"    \n"
+"    Z obliko `fc -s [vzorec=zamenjava] [ukaz]' se UKAZ ponovno izvede \n"
+"    po tem, ko se opravi nadomeš�anje OLD=NEW.\n"
+"    \n"
+"    Lahko se uporabi uporaben vzdevek r='fc -s' tako, da se z vnosom \n"
+"    `r cc' zažene zadnji ukaz, ki se za�ne z `cc' in vnosom `r' se ponovno \n"
+"    izvede zadnji ukaz.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno ali stanje izvedenega ukaza; ne-ni�elno, �e pride do napake."
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Premakne posel v ospredje.\n"
+"    \n"
+"    Premakne posel, dolo�en s strani DOLOČILA_POSLA, v ospredje,\n"
+"    kar ga spremeni v trenutni posel. ÄŒe DOLOÄŒILO_POSLA ni prisotno,\n"
+"    se uporabi ozna�ba lupine trenutnega posla.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Stanje ukaza, postavljenega v ospredje, ali neuspešno, �e se\n"
+"    pojavi napaka."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Premakne posle v ozadje.\n"
+"    \n"
+"    Postavi posle, dolo�ene s strani JOB_SPEC, v ozadje, kot �e bi se\n"
+"    za�eli z `&'. Če JOB_SPEC ni prisoten, se uporabi ozna�ba lupine\n"
+"    trenutnega posla.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, razen �e nadzor posla ni omogo�en ali �e pride\n"
+"    do napake."
+
+#: builtins.c:793
+#, fuzzy
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"Shrani ali prikaži mesta programov.\n"
+"    \n"
+"    Dolo�i in shrani polno ime poti vsakega IMENA ukaza.  Če\n"
+"    ni danih argumentov, se prikažejo podrobnosti o shranjenih ukazih.\n"
+"    \n"
+"    Možnosti:\n"
+"      -d\t\tpozabi shranjeno mesto vsakega IMENA\n"
+"      -l\t\tprikaži v obliki, ki se lahko ponovno uporabi kot vnos\n"
+"      -p ime_poti\tuporabi IME_POTI kot polno ime poti IMENA\n"
+"      -r\t\tpozabi vsa shranjena mesta\n"
+"      -t\t\tprikaži shranjena mesta vsakega IMENA, temu sledi\n"
+"    \t\tvsako mesto z ustreznim IMENOM, �e je danih ve� IMEN\n"
+"    ArgumentI:\n"
+"      IME\t\tVsako IME je iskano v $PATH in dodano na seznam\n"
+"    \t\tshranjenih ukazov.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, razen �e IME ni najdeno ali �e je dana neveljavna možnost."
+
+#: builtins.c:818
+#, fuzzy
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Prikaže podrobnosti o ukazih vgrajene lupine.\n"
+"    \n"
+"    Prikaže kratke povzetke ukazov vgrajene lupine. Če je VZOREC\n"
+"    dolo�en, da podrobno pomo� za vse ukaze, ki se ujemajo z VZORCEM,\n"
+"    v nasprotnem primeru prikaže seznam tem pomo�i.\n"
+"    \n"
+"    Možnosti:\n"
+"      -d\tizpiši kratek opis za vsako temo\n"
+"      -m\tprikaži uporabo v obliki psevdo-priro�niške strani\n"
+"      -s\tprikaži samo kratek povzetek uporabe za vsako temo, ki se\n"
+"    \tujema z VZORCEM\n"
+"    \n"
+"    ArgumentI:\n"
+"      VZOREC\tVzorec, ki navaja temo pomo�i\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, razen �e VZOREC ni najden ali pa je dana neveljavna\n"
+"    možnost."
+
+#: builtins.c:842
+#, fuzzy
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Prikaže ali obdela seznam zgodovine.\n"
+"    \n"
+"    Prikaže seznam zgodovine s številkami vrstic, vsak spremenjen vnos\n"
+"    ozna�i s predpono `*'. Argument N navede samo N zadnjih vnosov.\n"
+"    \n"
+"    Možnosti:\n"
+"      -c\tpobriši seznam zgodovine z brisanjem vseh vnosov\n"
+"      -d odmik\tpobriši vnos zgodovine pri odmiku ODMIK.\n"
+"    \n"
+"      -a\tpripni vrstice zgodovine iz te seje v datoteko zgodovine\n"
+"      -n\tpreberi vse vrstice zgodovine, ki Å¡e niso prebrane iz datoteke\n"
+"    \tzgodovine\n"
+"      -r\tpreberi datoteko zgodovine in pripni vsebino seznama\n"
+"    \tzgodovine\n"
+"      -w\tpiši trenutno zgodovino v datoteko zgodovine\n"
+"    \tin jo pripni na seznam zgodovine\n"
+"    \n"
+"      -p\topravi razširitev zgodovine na vsak ARG in prikaži rezultat\n"
+"    \tbrez shranitve na seznam zgodovine\n"
+"      -s\tpripni ARGUMENTE na seznam zgodovine kot edini vnos\n"
+"    \n"
+"    ÄŒe je IME_DATOTEKE podan, se uporabi kot datoteka zgodovine.\n"
+"    V nasprotnem primeru, �e $HISTFILE ima vrednost, ki se uporabi,\n"
+"    pa ~/.bash_history.\n"
+"    \n"
+"    Če je spremenljivka $HISTTIMEFORMAT dolo�ena in ni prazna, se\n"
+"    njena vrednost uporabi kot niz oblike za strftime(3) za prikaz �asovnih\n"
+"    žigov, ki so povezani z vsakim vnosom prikazane zgodovine.\n"
+"    V nasprotnem primeru �asovni žigi niso prikazani.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, razen �e je podana neveljavna možnost ali �e pride\n"
+"    do napake."
+
+#: builtins.c:879
+#, fuzzy
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"Prikaže stanje poslov.\n"
+"    \n"
+"    Navede dejavne posle.  DOLOÄŒILO_POSLA omejuje izpis v ta posel.\n"
+"    Brez podanih možnosti se prikaže stanje vseh dejavnih poslov.\n"
+"    \n"
+"    Možnosti:\n"
+"      -l\tnavedi ID-je opravil zraven obi�ajnih podatkov\n"
+"      -n\tnavedi samo opravila, ki imajo od zadnjega obvestila\n"
+"    \tspremenjena stanja\n"
+"      -p\tnavedi samo ID-je opravil\n"
+"      -r\tomeji izhod na posle, ki se izvajajo\n"
+"      -s\tomeji izhod na ustavljene posle\n"
+"    \n"
+"    Če je -x naveden, se zažene UKAZ, ko se dolo�ila poslov, ki se\n"
+"    pojavijo v ARGUMENTIH, zamenjajo z ID-jem opravila vodje skupine\n"
+"    opravil tega posla.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, razen �e je dana neveljavna možnost ali �e pride do\n"
+"    napake. Če se uporabi -x, vrne stanje kon�anja UKAZA."
+
+#: builtins.c:906
+#, fuzzy
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"Odstrani posle iz trenutne lupine.\n"
+"    \n"
+"    Odstrani vsak argument DOLOÄŒILA_POSLA s seznama dejavnih poslov.\n"
+"    Brez danih DOLOČIL_POSLA lupina uporabi svojo ozna�bo trenutnega\n"
+"    posla.\n"
+"    \n"
+"    Možnosti:\n"
+"      -a\todstrani vse posle, �e DOLOČILO_POSLA ni navedeno\n"
+"      -h\tozna�i vsako DOLOČILO_POSLA, tako da se SIGHUP ne pošlje\n"
+"    \tposlu, �e lupina prejme SIGHUP \n"
+"      -r\todstrani samo posle, ki se izvajajo\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, razen �e je dana neveljavna možnost ali �e je dano\n"
+"    DOLOÄŒILO_POSLA."
+
+#: builtins.c:925
+#, fuzzy
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Pošlje signal poslu.\n"
+"    \n"
+"    Pošlje opravila, dolo�ena s strani ID-ja opravila ali uporabi\n"
+"    DOLOÄŒILO_POSLA za signal, ki je imenovan s strani SIGSPEC ali SIGNUM.\n"
+"    ÄŒe SIGSPEC in SIGNUM nista prisotna, se predvideva SIGTERM.\n"
+"    \n"
+"    Možnosti:\n"
+"      -s sig\tSIG je ime signala\n"
+"      -n sig\tSIG je Å¡tevilka signala\n"
+"      -l\tnavedi imena signalov; �e `-l' sledijo argumenti, se predvideva,\n"
+"    \tda so Å¡tevilke signalov, za katere bi morala biti navedena imena\n"
+"    \n"
+"    Kill je vgrajena lupina zaradi dveh razlogov: omogo�a ID-jem poslov,\n"
+"    da se jih uporabi namesto ID-jev opravil in omogo�a uni�enje opravil,\n"
+"    �e se prekora�i meja ustvarjenih opravil.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, razen �e je dana neveljavna možnost ali �e pride do\n"
+"    napake."
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"Ovrednoti aritmeti�ne izraze.\n"
+"    \n"
+"    Ovrednoti vsak ARG kot aritmeti�ni izraz. Vrednotenje se opravi\n"
+"    v celih Å¡tevilih z nespremenjeno Å¡irino brez preverjanja za "
+"prekora�itev,\n"
+"    �eprav je deljenje z 0 ujeto in ozna�eno kot napaka. Seznam "
+"operatorjev,\n"
+"    ki sledi, je združen v stopnje operatorjev enakih prednosti. Stopnje so\n"
+"    razvrš�ene po padajo�i prednosti.\n"
+"    \n"
+"    \tid++, id--\tnaknadno ve�anje spremenljivke, naknadno manjšanje\n"
+"    \t++id, --id\tpredhodno ve�anje spremenljivke, predhodno manjšanje\n"
+"    \t-, +\t\tenosloven minus, plus\n"
+"    \t!, ~\t\tlogi�na in bitna negacija\n"
+"    \t**\t\tpotenciranje\n"
+"    \t*, /, %\t\tmnoženje, deljenje, ostanek\n"
+"    \t+, -\t\tseštevanje, odštevanje\n"
+"    \t<<, >>\t\tlevi in desni bitni premiki\n"
+"    \t<=, >=, <, >\tprimerjava\n"
+"    \t==, !=\t\tenakost, neenakost\n"
+"    \t&\t\tbitni AND\n"
+"    \t^\t\tbitni XOR\n"
+"    \t|\t\tbitni OR\n"
+"    \t&&\t\tlogi�ni AND\n"
+"    \t||\t\tlogi�ni OR\n"
+"    \tizraz ? izraz : izraz\n"
+"    \t\t\tpogojni operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tdodeljevanje   \n"
+"    \n"
+"    Spremenljivke lupine so dovoljene kot operandi. Ime spremenljivke\n"
+"    se zamenja z njeno vrednostjo (prisiljena na celo Å¡tevilo z\n"
+"    nespremenljivo Å¡irino) znotraj izraza. Za uporabo spremenljivke v ni\n"
+"    treba vklopliti atributa celega Å¡tevila.\n"
+"    \n"
+"    Operatorji so ovrednoteni v prednostnem vrstnem redu. Podizrazi\n"
+"    v oklepajih so ovrednoteni prvi in lahko prepišejo prednostna \n"
+"    pravila, omenjena zgoraj.\n"
+"    \n"
+"    Stanje kon�anja\n"
+"    ÄŒe zadnji ARG ovrednoti na 0, let vrne 1; sicer let vrne 0."
+
+#: builtins.c:994
+#, fuzzy
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"Prebere vrstico iz standardnega vhoda in jo razdeli v polja.\n"
+"    \n"
+"    Prebere eno vrstico iz standardnega vhoda ali iz opisnika FD, �e je\n"
+"    navedena možnost -u. Vrstica je razdeljena na polja, kot je delitev\n"
+"    besed in prva beseda je dodeljena prvemu IMENU, druga beseda drugemu\n"
+"    IMENU itd., ostanek zadnje besede pa se dodeli zadnjemu IMENU.\n"
+"    Samo znaki, najdeni v $IFS, so prepoznani kot razmejilniki besed.\n"
+"    \n"
+"    ÄŒe ni navedenih IMEN, se prebrana vrstica shrani v spremenljivko REPLY.\n"
+"    \n"
+"    Možnosti:\n"
+"      -a polje\tdodeli prebrane besede zaporednim kazalom spremenljivke \n"
+"    \t\tpolja POLJE, za�enši z 0\n"
+"      -d razmejilnik\tnadaljuj, dokler ni prvi znak RAZMEJILNIKA prebran,\n"
+"    \t\tnamesto v novo vrstico\n"
+"      -e\t\tuporabi Readline za pridobitev vrstice v vzajemni lupini\n"
+"      -i besedilo\tuporabi BESEDILO kot prvotno besedilo za Readline\n"
+"      -n n-znakov\tvrni po branju znakov N-ZNAKOV, namesto �akanja na\n"
+"    \t\tnovo vrstico, toda spoštuj razmejilnik, �e je prebranih znakov\n"
+"    \t\tmanj kot N-ZNAKOV pred razmejilnikom\n"
+"      -N n-znakov\tvrni samo po branju N-ZNAKOV znakov, razen �e naleti\n"
+"    \t\tna konec datoteke ali �e branju pote�e �asovna omejitev, brez\n"
+"    \t\tupoštevanja katerega koli razmejilnika\n"
+"      -p poziv\tizpiši niz POZIV brez vmesne nove vrstice, preden se\n"
+"    \t\tposkuša prebrati\n"
+"      -r\t\tne dovoli levih poševnic za izognitev vsem znakom\n"
+"      -s\t\tne izpiši vnosa, ki prihaja s terminala\n"
+"      -t �asovna_omejitev\tpreseži �asovno omejitev in vrni neuspešno, �e\n"
+"    \t\tznotraj ÄŒASOVNE_OMEJITVE sekund ni prebrana celotna vrstica\n"
+"    \t\tvnosa. Vrednost spremenljivke TMOUT je privzeta �asovna\n"
+"    \t\tomejitev. ÄŒASOVNA_OMEJITEV je lahko decimalno Å¡tevilo.\n"
+"    \t\tČe je ČASOVNA_OMEJITEV 0, branje vrne uspešno samo, �e je na\n"
+"    \t\tdolo�enem opisniku datoteke na voljo vnos. Stanje kon�anja je\n"
+"    \t\tve�je kot 128, �e je �asovna omejitev prekora�ena\n"
+"      -u fd\t\tberi iz opisnika datotek FD, namesto standardnega vhoda\n"
+"    \n"
+"    Stanje kon�anja\n"
+"    Koda vrnitve je ni�, razen �e pride do konca datoteke, �e je �asovna \n"
+"    omejitev prekora�ena ali �e je dan neveljaven opisnik datotek kot\n"
+"    argument v -u."
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"Vrne iz funkcije lupine.\n"
+"    \n"
+"    Povzro�i, da funkcija ali skripta izvorne kode kon�a z vrednostjo\n"
+"    vrnitve, dolo�ene z N. Če je N izpuš�en, se uporabi stanje vrnitve\n"
+"    zadnjega izvršenega ukaza znotraj funkcije ali skripta.\n"
+"    \n"
+"    Stanje kon�anja\n"
+"    Vrne N ali neuspešno, �e lupina ne izvede funkcije ali skripta."
+
+#: builtins.c:1054
+#, fuzzy
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"Nastavi ali ponastavi vrednosti možnosti lupine in položajne parametre.\n"
+"    \n"
+"    Spremeni vrednost atributov lupine in položajnih parametrov ali\n"
+"    prikaže imena in vrednosti spremenljivk lupine.\n"
+"    \n"
+"    Možnosti:\n"
+"      -a Ozna�i vrednosti, ki so spremenjene ali ustvarjene za izvoz.\n"
+"      -b Takoj obvesti o uni�enju posla.\n"
+"      -e Takoj kon�aj, �e ukaz obstaja z ne-ni�elnim stanjem.\n"
+"      -f Onemogo�i ustvarjanje imen datotek (globbing).\n"
+"      -h Zapomni si mesto ukazov, ko se jih iš�e.\n"
+"      -k Vsi argumenti dodeljevanja so postavljeni v okolje za ukaz, ne\n"
+"          samo tisti, ki imajo predhodna imena ukazov.\n"
+"      -m Nadzor poslov je omogo�en.\n"
+"      -n Preberi ukaze, toda ne izvedi jih.\n"
+"      -o ime_možnosti\n"
+"          Nastavi spremenljivke, ki ustrezajo ime_možnosti:\n"
+"              allexport enako kot -a\n"
+"              braceexpand enako kot -B\n"
+"              emacs uporabi vmesnik urejanja vrstic s slogom emacs\n"
+"              errexit enako kot -e\n"
+"              errtrace enako kot -E\n"
+"              functrace enako kot -T\n"
+"              hashall enako kot -h\n"
+"              histexpand enako kot -H\n"
+"              history omogo�i zgodovino ukazov\n"
+"              ignoreeof lupina se ne bo kon�ala po koncu branja datoteke\n"
+"              interactive-comments\n"
+"                           omogo�i, da se ukazi pojavijo v vzajemnih ukazih\n"
+"              keyword enako kot -k\n"
+"              monitor enako kot -m\n"
+"              noclobber enako kot -C\n"
+"              noexec enako kot -n\n"
+"              noglob enako kot -f\n"
+"              nolog trenutno sprejeto, toda neupoštevano\n"
+"              notify enako kot -b\n"
+"              nounset enako kot -u\n"
+"              onecmd enako kot -t\n"
+"              physical enako kot -P\n"
+"              pipefail vrnjena vrednost cevovoda je stanje zadnjega\n"
+"                           ukaza, ki je kon�al z ne-ni�elnim stanjem ali "
+"ni�,\n"
+"                           �e noben ukaz ni kon�al ne-ni�elnim stanjem\n"
+"              posix spremeni obnašanje bash-a, kjer se privzeto\n"
+"                           opravilo razlikuje od standarda POSIX pri\n"
+"                           ujemanju standarda\n"
+"              privileged enako kot -p\n"
+"              verbose enako kot -v\n"
+"              vi uporabi vmesnik urejanja vrstic s slogom vi\n"
+"              xtrace enako kot -x\n"
+"      -p Vklopljeno, kadar se pravi in u�inkoviti uporabniški ID-ji ne\n"
+"          ujamajo. Onemogo�i obdelavo datoteke $ENV in uvoz funkcij\n"
+"          lupine. Onemogo�enje te možnosti povzro�i, da sta u�inkovit\n"
+"          uporabniški id in id skupine nastavljena na resni�en\n"
+"          uporabniški id in id skupine.\n"
+"      -t Kon�aj po branju in izvedbi enega ukaza.\n"
+"      -u Obravnavaj ponastavljene spremenljivke kot napako pri\n"
+"          zamenjavi.\n"
+"      -v Prikaži vrstice vnosa lupine kot so prebrane.\n"
+"      -x Prikaži ukaze in njihove argumente kot so izvedeni.\n"
+"      -B lupina bo izvedla Å¡iritev oklepaja\n"
+"      -C �e je nastavljen, ne dovoli obi�ajnim datotekam,\n"
+"          da bi bile prepisane s preusmeritvijo izhoda.\n"
+"      -E ÄŒe je nastavljeno, je past ERR dedovana s strani\n"
+"          funkcij lupine.\n"
+"      -H Omogo�i zamenjavo zgodovine s slogom! . Ta zastavica\n"
+"          je privzeto omogo�ena, kadar je lupina vzajemna.\n"
+"      -P ÄŒe je nastavljeno, ne sledi simbolnim povezavam, kadar se\n"
+"          izvajajo ukazi, kot je cd, ki spremeni trenutno mapo.\n"
+"      -T ÄŒe je nastavljeno, je past DEBUG dedovana s strani\n"
+"          funkcij lupine.\n"
+"      -- Dodeli vse preostale argumente v položajne parametre.\n"
+"          Če ni preostalih argumentov, so položajni parametri\n"
+"          ponastavljeni.\n"
+"      - Dodeli vse preostale argumente v položajne parametre.\n"
+"          Možnosti -x in -v sta izklju�eni.\n"
+"    \n"
+"    Uporaba + namesto - povzro�i, da se te zastave izklopijo.\n"
+"    Zastave se lahko tudi uporabijo za po klicu lupine. Trenuten\n"
+"    niz zastavic je mogo�e najti v $-. Preostali n ARGUMENTI so\n"
+"    položajni parametri in so dodeljeni vrstnem redu k $1, $2, .. $n.\n"
+"    Če ni danih ARGUMENTOV, se izpišejo vse spremenljivke\n"
+"    lupine.\n"
+"    \n"
+"    Stanje kon�anja\n"
+"    Vrne uspešno, razen �e je dana neveljavna možnost."
+
+#: builtins.c:1139
+#, fuzzy
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"Ponastavi vrednosti in atribute spremenljivk in funkcij lupine.\n"
+"    \n"
+"    Za vsako IME odstrani ustrezno spremenljivko ali funkcijo.\n"
+"    \n"
+"    Možnosti:\n"
+"      -f\tobravnavaj vsako IME kot funkcijo lupine\n"
+"      -v\tobravnavaj vsako IME kot spremenljivko lupine\n"
+"    \n"
+"    Če ni danih možnosti, poskuša unset ponastaviti spremenljivko in �e\n"
+"    to ne uspe, poskuša ponastaviti funkcijo.\n"
+"    \n"
+"    Nekaterih spremenljivk ni mogo�e ponastaviti; glejte tudi `readonly'.\n"
+"    \n"
+"    Stanje kon�anja\n"
+"    Vrne uspešno, razen �e je dana neveljavna možnost ali �e je IME samo\n"
+"    za branje."
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Nastavi atribut izvoza za spremenljivke lupine.\n"
+"    \n"
+"    Ozna�i vsako IME za samodejni izvoz v okolje naknadno izvedenih\n"
+"    ukazov. ÄŒe je VREDNOST vnesena, dodeli VREDNOST pred izvozom.\n"
+"    \n"
+"    Možnosti:\n"
+"      -f\tnanašaj se na funkcije lupine\n"
+"      -n\todstrani lastnost izvoza iz vsakega IMENA\n"
+"      -p\tprikaži seznam vseh izvoženih spremenljivk in funkcij\n"
+"    \n"
+"    Argument od `--' onemogo�i nadaljnjo obdelavo možnosti.\n"
+"    \n"
+"    Stanje kon�anja\n"
+"    Vrne uspešno, razen �e je dana neveljavna možnost ali �e je\n"
+"    neveljavno IME."
+
+#: builtins.c:1180
+#, fuzzy
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Ozna�i spremenljivke lupine kot nespremenljive.\n"
+"    \n"
+"    Ozna�i vsako IME kot samo za branje; vrednosti teh IMEN se morda\n"
+"    ne bodo spremenile s strani naknadne dodelitve. ÄŒe je VREDNOST\n"
+"    predložena, dodeli VREDNOST pred ozna�itvijo samo za branje.\n"
+"    \n"
+"    Možnosti:\n"
+"      -a\tnanašaj se na spremenljivke zabeleženih polj\n"
+"      -A\tnanašaj se spremenljivke povezanih polj\n"
+"      -f\tnanašaj se na funkcije lupine\n"
+"      -p\tprikaži seznam vseh spremenljivk in funkcij, ki so samo\n"
+"    \tza branje\n"
+"    \n"
+"    Argument od `--' onemogo�i nadaljnjo obdelavo možnosti.\n"
+"    \n"
+"    Stanje kon�anja\n"
+"    Vrne uspešno, razen �e je dana neveljavna možnost ali �e je\n"
+"    neveljavno IME."
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"Premakne položajne parametre.\n"
+"    \n"
+"    Preimenuje položajne parametre $N+1, $N+2 ... v $1,$2 ...\n"
+"    ÄŒe N ni dan, se predvideva, da je 1.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, razen �e je N negativen ali ve�ji kot $#."
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Izvede ukaze iz datoteke v trenutni lupini.\n"
+"    \n"
+"    Prebere in izvede ukaze iz DATOTEKE v trenutni lupini. Vnosi v $PATH\n"
+"    so uporabljeni za iskanje mape, ki vsebuje IME_DATOTEKE. \n"
+"    Če so kakšni ARGUMENTI predloženi, postanejo položajni parametri,\n"
+"    kadar se izvede IME_DATOTEKE.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne stanje zadnjega izvršenega ukaza v IMENU_DATOTEKE; vrne\n"
+"    neuspešno, �e IMENA_DATOTEKE ni mogo�e brati."
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Da izvedbo lupine v pripravljenost.\n"
+"    \n"
+"    Da izvedbo te lupine v pripravljenost, dokler ne prejme signala\n"
+"    SIGCONT. Lupine prijave ni mogo�e dati v pripravljenost, razen �e se\n"
+"    jo prisili.\n"
+"    \n"
+"    Možnosti:\n"
+"      -f\tprisili stanje pripravljenosti, tudi �e je lupina lupina prijave\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, razen �e nadzor posla ni omogo�en ali �e pride do\n"
+"    napake."
+
+#: builtins.c:1261
+#, fuzzy
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"Ovrednoti pogojni izraz.\n"
+"    \n"
+"    Kon�a s stanjem 0 (prav) ali 1 (napak), odvisno od ovrednotenja IZRAZA.\n"
+"    Izrazi so lahko enoslovni ali binarni. Enoslovni izrazi so pogosto\n"
+"    uporabljeni za preverjanje stanja datoteke. Obstajajo tudi operatorji\n"
+"    nizov in operatorji Å¡tevilskih primerjav.\n"
+"    \n"
+"    Obnašanje preizkusa je odvisno od števila argumentov. Preberite \n"
+"    si stran priro�nika bash za popolno raz�lenitev.\n"
+"    \n"
+"    Operatorji datotek:\n"
+"    \n"
+"      -a DATOTEKA Prav, �e datoteka obstaja.\n"
+"      -b DATOTEKA Prav, �e je datoteka posebnost bloka.\n"
+"      -c DATOTEKA Prav, �e je datoteka posebnost znaka.\n"
+"      -d DATOTEKA Prav, �e je datoteka mapa.\n"
+"      -e DATOTEKA Prav, �e datoteka obstaja.\n"
+"      -f DATOTEKA  Prav, �e datoteka obstaja in je obi�ajna.\n"
+"      -g DATOTEKA Prav, �e je datoteka set-group-id.\n"
+"      -h DATOTEKA Prav, �e je datoteka simbolna povezava.\n"
+"      -L DATOTEKA Prav, �e je datoteka simbolna povezava.\n"
+"      -k DATOTEKA Prav, �e ima datoteka nastavljeno zastavo `sticky' bit\n"
+"      -p DATOTEKA Prav, �e je datoteka imenovana cev.\n"
+"      -r DATOTEKA Prav, �e je datoteka berljiva za Vas.\n"
+"      -s DATOTEKA Prav, �e datoteka obstaja in ni prazna.\n"
+"      -S DATOTEKA Prav, �e datoteka ni vstavek.\n"
+"      -t FD Prav, �e je FD odprt v terminalu.\n"
+"      -u DATOTEKA Prav, �e je datoteka set-user-id.\n"
+"      -w DATOTEKA Prav, �e je datoteka zapisljiva za Vas.\n"
+"      -x DATOTEKA Prav, �e je datoteka izvedljiva za Vas.\n"
+"      -O DATOTEKA Prav, �e datoteka v vaši lasti.\n"
+"      -G DATOTEKA Prav, �e je datoteka v lasti vaše skupine.\n"
+"      -N DATOTEKA Prav, �e je datoteka bila spremenjena, odkar je bila\n"
+"                       nazadnje prebrana.\n"
+"    \n"
+"      DATOTEKA1 -nt DATOTEKA Prav, �e je datoteka1 novejša kot\n"
+"                       datoteka2 (glede na datum spremembe).\n"
+"    \n"
+"      DATOTEKA1 -ot DATOTEKA2 Prav, �e je datoteka1 starejša kot\n"
+"                       datoteka2.\n"
+"    \n"
+"      DATOTEKA1 -ef DATOTEKA2 Prav, �e je datoteka1 nespremenljivo\n"
+"                       vezana na datoteko2.\n"
+"    \n"
+"    Operatorji nizov:\n"
+"    \n"
+"      -z NIZ Prav, �e je niz prazen.\n"
+"    \n"
+"      -n NIZ\n"
+"         NIZ Prav, �e niz ni prazen.\n"
+"    \n"
+"      NIZ1 = NIZ2\n"
+"                     Prav, �e sta niza enaka.\n"
+"      NIZ1 != NIZ2\n"
+"                     Prav, �e niza nista enaka.\n"
+"     NIZ1 < NIZ2\n"
+"                     Prav, �e NIZ1 razvrsti po abecedi prej kot NIZ2.\n"
+"      NIZ1 > NIZ2\n"
+"                     Prav, �e NIZ1 razvrsti po abecedi kasneje kot NIZ2.\n"
+"    \n"
+"    Drugi operatorji:\n"
+"    \n"
+"      -o MOŽNOST Prav, �e je možnost lupine MOŽNOST omogo�ena.\n"
+"      -v SPR\t Prav, �e je spremenljivka lupine SPR nastavljena\n"
+"      ! IZRAZ Prav, �e je izraz napak.\n"
+"      IZRAZ1 -a IZRAZ2 Prav, �e sta izraz1 IN izraz2 prav.\n"
+"      IZRAZ1 -o IZRAZ2 Prav, �e je izraz1 ALI izraz2 prav.\n"
+"    \n"
+"      arg1 OP arg2 Aritmeti�ni preizkusi. OP je eden od -eq, -ne,\n"
+"                     -lt, -le, -gt, ali -ge.\n"
+"    \n"
+"    Aritmeti�na binarna operatorja vrneta prav, �e je ARG1 enak, neenak,\n"
+"    manjši-kot, manjši-kot-ali-enak, ve�ji-kot ali ve�ji-kot-ali-enak\n"
+"    kot ARG2.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, �e IZRAZ ovrednoti prav, neuspešno vrne, �e IZRAZ \n"
+"    ovrednoti napak ali �e je dan neveljaven argument."
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Ovrednoti pogojni izraz.\n"
+"    \n"
+"    To je sopomenka za vgrajeno lupino \"test\", toda zadnji argument\n"
+"    mora biti dobesedni `]' za ujemanje z uklepajem `['."
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Prikaže �ase opravila.\n"
+"    \n"
+"    Prikaže zbrane �ase uporabnika in sistema za lupino in vsa njena\n"
+"    podrejena opravila.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vedno uspešno."
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"Signali trap in ostali dogodki.\n"
+"    \n"
+"    Dolo�i in omogo�i ro�nik, da se jih zažene, kadar lupina sprejme "
+"signale\n"
+"    ali ostale pogoje.\n"
+"    \n"
+"    ARG je ukaz, ki se ga prebere in izvrši, kadar lupina sprejme signal(e)\n"
+"    SIGNAL_SPEC. Če je ARG odsoten (in predložen en SIGNAL_SPEC)\n"
+"    ali `-', je vsak dolo�en signal ponastavljen na svojo prvotno vrednost.\n"
+"    ÄŒe je ARG prazen niz, je vsak SIGNAL_SPEC prezrt s strani lupine\n"
+"    in ukazov, ki jih pokli�e.\n"
+"    \n"
+"    Če je SIGNAL_SPEC EXIT (0), se ARG izvrši ob izhodu iz lupine. Če je\n"
+"    SIGNAL_SPEC DEBUG, je ARG izvršen pred vsakim ukazom. Če je\n"
+"    SIGNAL_SPEC RETURN, se ARG izvrši vsaki�, ko funkcija lupine ali "
+"skript,\n"
+"    zagnan s strani . ali vgrajenih virov, kon�a z izvajanjem. SIGNAL_SPEC\n"
+"    od ERR pomeni, da se ARG izvede vsaki�, ko bi napaka ukaza povzro�ila, "
+"da\n"
+"    bi se lupina kon�ala, kadar je omogo�ena možnost -e.\n"
+"    \n"
+"    Če ni predloženih argumentov, trap prikaže seznam ukazov, povezanih z\n"
+"    vsakim signalom.\n"
+"    \n"
+"    Možnosti:\n"
+"      -l\tPrikaži seznam imen signalov in njihove ustrezne številke\n"
+"      -p\tprikaži ukaze trap, povezane z vsakim SIGNAL_SPEC\n"
+"    \n"
+"    Vsak SIGNAL_SPEC je bodisi ime signala v <signal.h> bodisi Å¡tevilka "
+"signala.\n"
+"    Imena signalov lo�ujejo velikost �rk in predpona SIG je izbirna.\n"
+"    Signal je lahko poslan v lupino s \"kill -signal $$\".\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, razen �e je SIGSPEC neveljaven ali je dana neveljavna "
+"možnost."
+
+#: builtins.c:1400
+#, fuzzy
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"Prikaže podrobnosti o vrsti ukaza.\n"
+"    \n"
+"    Za vsako IME nakaže, kako bi bilo tolma�eno, �e bi bilo uporabljeno\n"
+"    v imenu ukaza.\n"
+"    \n"
+"    Možnosti:\n"
+"      -a\tprikaži vsa mesta, ki vsebujejo izvedljivo datoteko z imenom\n"
+"    \tIME;\n"
+"    \tvklju�uje vzdevke, vgrajene lupine in funkcije, ampak samo,\n"
+"    \t�e možnost `-p' NI uporabljena.\n"
+"      -f\tzatri iskanje funkcij lupine\n"
+"      -P\tprisili iskanje POTI za vsako IME, tudi �e je vzdevek,\n"
+"    \tvgrajena lupina ali funkcija, in vrni ime datoteke diska, ki bi\n"
+"    \tbil izvršen.\n"
+"      -p\tvrne ime datoteke diska, ki bi bila izvršena ali ni�,\n"
+"    \t�e `type -t NAME' ne bi vrnil datoteke `file'.\n"
+"      -t\tizpiši eno besedo, katera je ena izmed `vzdevkov', \n"
+"    \t`klju�nih_besed', `funkcij', `vgrajenih_lupin', `datotek' ali `', \n"
+"    \t�e je IME vzdevek, rezervirana beseda, funkcija lupine, vgrajena \n"
+"    \tlupina, datoteka diska ali ni najdeno, v tem zaporedju\n"
+"    \n"
+"    Argumenti:\n"
+"      IME\tIme ukaza, ki bo tolma�eno.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, �e so vsa IMENA najdena; vrne neuspešno, �e katero\n"
+"    ni najdeno."
+
+#: builtins.c:1431
+#, fuzzy
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Spremeni omejitve virov lupine.\n"
+"    \n"
+"    Zagotavlja nadzor nad sredstvi, ki so na voljo lupini in ustvarjenim\n"
+"    opravilom, na sistemih, ki omogo�ajo tak nadzor.\n"
+"    \n"
+"    Možnosti:\n"
+"      -S\tuporabi blago omejitev virov `soft'\n"
+"      -H\tuporabi strogo omejitev virov `hard'\n"
+"      -a\tvse trenutne omejitve so poro�ane\n"
+"      -b\tvelikost medpomnilnika vti�a\n"
+"      -c\tnajve�ja velikost ustvarjenih datotek jedra\n"
+"      -d\tnajve�ja velikost odseka podatkov opravila\n"
+"      -e\tnajve�ja prednost razporejanja (`nice')\n"
+"      -f\tnajve�ja velikost datotek, ki so napisane s strani lupine in "
+"njenih\n"
+"    \tpodrejenih opravil\n"
+"      -i\tnajve�je število signalov na �akanju\n"
+"      -l\tnajve�ja velikost, ki jo opravilo lahko zaklene v pomnilnik\n"
+"      -m\tnajve�ja velikost stalnih naborov\n"
+"      -n\tnajve�je število odprtih opisnikov datotek\n"
+"      -p\tvelikost medpomnilnika cevi\n"
+"      -q\tnajve�je število bajtov v �akalnih vrstah sporo�il POSIX\n"
+"      -r\tnajve�ja prednost razporejanja v realnem �asu\n"
+"      -s\tnajve�ja velikost sklada\n"
+"      -t\tnajve�ja koli�ina �asa cpe v sekundah\n"
+"      -u\tnajve�je število uporabniških opravil\n"
+"      -v\tvelikost navideznega pomnilnika\n"
+"      -x\tnajve�je število datote�nih klju�avnic\n"
+"    \n"
+"    ÄŒe je MEJA dana, je le-ta nova vrednost navedenega vira; posebne \n"
+"    vrednosti MEJE `soft', `hard' in `unlimited' pomenijo trenutno blago \n"
+"    omejitev, trenutno strogo omejitev in brez omejitev, v tem vrstem redu.\n"
+"    V nasprotnem primeru se izpiše trenutna vrednost navedenega vira.\n"
+"    Če ni danih možnosti, se predpostavlja -f.\n"
+"    \n"
+"    Vrednosti so v 1024-bajtnem pove�anju, razen za -t, ki je v sekundah,\n"
+"    -p, ki je v pove�anju za 512 bajtov, in -u, ki je nespremenjeno število\n"
+"    opravil.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, razen �e je dana neveljavna možnost ali �e pride do\n"
+"    napake."
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"Prikaži ali nastavi masko na�ina datoteke.\n"
+"    \n"
+"    Nastavi uporabniško masko ustvarjanja datoteke v NAČIN. Če je\n"
+"    NAČIN izpuš�en, prikaže trenutno vrednost maske.\n"
+"    \n"
+"    Če se NAČIN za�ne z števko, se tolma�i kot osmiško število;\n"
+"    sicer je niz simbolnega na�ina kot je sprejet s strani chmod(1).\n"
+"    \n"
+"    Možnosti:\n"
+"      -p\t�e je NAČIN izpuš�en, izpiši v obliki, ki se lahko uporabi kot "
+"vnos\n"
+"      -S\tnaredi simbolni izpis; sicer se izpiše osmiško število\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, razen �e je NAČIN neveljaven ali �e je dana neveljavna\n"
+"    možnost."
+
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"Čaka na dokon�anje posla in vrne stanje kon�anja.\n"
+"    \n"
+"    Po�aka na opravilo, dolo�eno s strani ID-ja, ki je lahko ID opravila "
+"ali\n"
+"    dolo�ilo posla in poro�a svoje stanje uni�enja. Če ID ni dan, po�aka\n"
+"    vsa trenutno dejavna podrejena opravila in stanje kon�anja je ni�.\n"
+"    Če je ID dolo�ilo posla, po�aka vsa opravila v cevovodu\n"
+"    posla.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne stanje ID-ja; vrne neuspešno, �e je ID neveljaven ali �e je dana\n"
+"    neveljavna možnost."
+
+#: builtins.c:1533
+#, fuzzy
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"Čaka na kon�anje opravila in vrne stanje kon�anja.\n"
+"    \n"
+"    Po�aka na dolo�eno opravilo in poro�a svoje stanje uni�enja. Če ID\n"
+"    opravila ni dan, so vsa trenutno dejavna podrejena opravila na\n"
+"    �akanju in stanje kon�anja je ni�.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne stanje ID-ja; neuspešno, �e je ID neveljaven ali �e je dana\n"
+"    neveljavna možnost."
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Izvede ukaze za vsakega �lana na seznamu.\n"
+"    \n"
+"    Zanka `for'  izvede zaporedje ukazov za vsakega �lana na seznamu\n"
+"    predmetov. ÄŒe `in BESEDE ...;' niso prisotna, se predvideva `in \"$@"
+"\"'.\n"
+"    Za vsak element v BESEDAH je IME nastavljeno temu predmetu in\n"
+"    UKAZI so izvršeni.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne stanje zadnjega izvršenega ukaza."
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Aritmeti�na zanka for.\n"
+"    \n"
+"    Enakovredna je \n"
+"    \t(( IZRAZ1 ))\n"
+"    \twhile (( IZRAZ2 )); do\n"
+"    \t\tUKAZI\n"
+"    \t\t(( IZRAZ3 ))\n"
+"    \tdone\n"
+"    IZRAZ1, IZRAZ2, in IZRAZ3 so aritmeti�ni izrazi. Če je kateri izraz "
+"izpuš�en,\n"
+"    se obnaša, kot da so enaki 1.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne stanje zadnjega izvršenega ukaza."
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Izbere besede s seznama in izvede ukaze.\n"
+"    \n"
+"    BESEDE so razširjene, kar ustvari seznam besed. Nabor razširjenih\n"
+"    besed se izpiše na standardno napako, vsaka s svojo številko.\n"
+"    ÄŒe `in BESEDE ...;' niso prisotne, se predvideva\n"
+"    `in \"$@\"'. Potem je prikazan poziv PS3 in vrstica prebrana\n"
+"    s standardnega vnosa. ÄŒe je vrstica sestavljena iz Å¡tevilke, ki ustreza\n"
+"    eni od prikazanih besed, potem je IME nastavljeno tej besedi.\n"
+"    ÄŒe je vrstica prazna, so BESEDE v pozivu prikazane \n"
+"    ponovno. Če se prebere konec datoteke, se ukaz zaklju�i. Vsaka druga \n"
+"    prebrana vrednost povzro�i, da se IME nastavi na prazno vrednost.\n"
+"    Prebrana vrstica je shranjena v spremenljivki ODGOVOR. UKAZI so "
+"izvršeni \n"
+"    po vsakem izboru, dokler se ne izvede ukaz break.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne stanje zadnjega izvršenega ukaza."
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"Poro�a porabljen �as s strani izvedbe cevovoda.\n"
+"    \n"
+"    Izvede CEVOVOD in prikaže povzetek dejanskega �asa, �as \n"
+"    uporabniške CPE in �as sistemske CPE, porabljen za izvajanje CEVOVODA,\n"
+"    ko se kon�a.\n"
+"    \n"
+"    Možnosti:\n"
+"      -p\tprikaži �asovni povzetek v prenosni obliki POSIX\n"
+"    \n"
+"    Vrednost spremenljivke TIMEFORMAT se uporabi kot oblika izpisa.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Stanje kon�anja je stanje kon�anja CEVOVODA."
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Izvrši ukaze na podlagi ujemanja vzorcev.\n"
+"    \n"
+"    Izbirno izvrši UKAZE, ki temeljijo na VZORCU BESEDNEGA ujemanja.\n"
+"    `|' se uporablja za lo�evanje ve�ih vzorcev.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne stanje zadnjega izvršenega ukaza."
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Izvaja ukaze, ki temeljijo na pogojih.\n"
+"    \n"
+"    Izvede se seznam `if UKAZI'. Če je njegovo stanje ni�, se izvede seznam\n"
+"    `then UKAZI'. V nasprotnem primeru se izvede vsak seznam `elif UKAZI' \n"
+"    in �e je njegovo stanje ni�, se izvede ustrezen seznam `then UKAZI' \n"
+"    in ukaz if se zaklju�i. V nasprotnem primeru se izvede seznam \n"
+"    `else UKAZI', �e je prisoten. Stanje kon�anja celotnega izgrajenja \n"
+"    je stanje kon�anja zadnjega izvršenega ukaza ali ni�, �e noben pogoj "
+"ni \n"
+"    dal prav.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne stanje zadnjega izvršenega ukaza."
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Izvaja ukaze, dokler je preizkus uspešen.\n"
+"    \n"
+"    Razširja in izvaja UKAZE tako dolgo, dokler ima zadnji ukaz v UKAZIH\n"
+"    `while' stanje kon�anja, ki je ni�.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne stanje zadnjega izvršenega ukaza."
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Izvaja ukaze, dokler je preizkus neuspešen.\n"
+"    \n"
+"    Razširja in izvaja UKAZE tako dolgo, dokler ima zadnji ukaz v UKAZIH\n"
+"    `until' stanje kon�anja, ki ni ni�.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne stanje zadnjega izvršenega ukaza."
+
+#: builtins.c:1671
+#, fuzzy
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"Ustvari soopravilo, imenovano IME.\n"
+"    \n"
+"    Izvrši UKAZ neusklajeno, s standardnim izhodom in vnosom ukaza, ki sta \n"
+"    povezana preko cevi z opisniki datotek, ki so dodeljeni kazalom 0 in 1 \n"
+"    spremenljivke polja IME v izvršilni lupini.\n"
+"    Privzeto IME je \"COPROC\".\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne stanje kon�anja UKAZA."
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"Dolo�i funkcijo lupine.\n"
+"    \n"
+"    Ustvari funkcijo lupine, imenovano IME. Kadar je poklicana kot preprost "
+"ukaz,\n"
+"    IME zažene UKAZE v vsebini klico�e lupine. Kadar se kli�e IME, so "
+"argumenti\n"
+"    posredovani v funkcijo kot $1...$n in ime funkcije je v $FUNCNAME.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, razen �e je IME samo za branje."
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Združi ukaze kot enoto.\n"
+"    \n"
+"    Zažene nabor ukazov v skupini. To je eden od na�inov za \n"
+"    preusmeritev celotnega nabora ukazov.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne stanje zadnjega izvršenega ukaza."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"Obnovi posel v ospredju.\n"
+"    \n"
+"    Je enakovreden argumentu DOLOÄŒILO_POSLA v ukazu `fg'. Obnovi posel,\n"
+"    ki je ustavljen ali v ozadju. DOLOČILO_POSLA lahko dolo�i bodisi ime\n"
+"    posla bodisi Å¡tevilko posla. DOLOÄŒILU_POSLA sledi `&', ki postavi posel\n"
+"    v ozadje, kot �e bi dolo�ilo posla bilo dobavljeno kot argument ukazu "
+"`bg'.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne stanje obnovljenega posla."
+
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Ovrednoti aritmeti�ni izraz.\n"
+"    \n"
+"    IZRAZ je ovrednoten v skladu s pravili za aritmeti�no ovrednotenje.\n"
+"    Je enakovreden ukazu \"let IZRAZ\".\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne 1, �e je IZRAZ enakovreden; sicer vrne 0."
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"Izvrši pogojni ukaz.\n"
+"    \n"
+"    Vrne stanje 0 ali 1, odvisno od vrednotenja pogojnega izraza IZRAZ.\n"
+"    expression EXPRESSION. Izrazi so sestavljeni iz istih osnov, ki so "
+"uporabljajo\n"
+"    s strani vgrajene lupine `test' in se lahko spajajo s pomo�jo "
+"naslednjih\n"
+"    operatorjev:\n"
+"    \n"
+"      ( IZRAZ )\tVrne vrednost IZRAZA\n"
+"      ! IZRAZ\t\tPrav, �e je IZRAZ napak; sicer vrne napak\n"
+"      IZRAZ1 && IZRAZ2\tPrav, �e sta IZRAZ1 in IZRAZ2 prav; sicer vrne "
+"napak\n"
+"      IZRAZ1 || IZRAZ2\tTPrav, �e je IZRAZ1 ali IZRAZ2 prav; sicer vrne "
+"napak\n"
+"    \n"
+"    Kadar se uporabita operatorja `==' in `!=', se niz desno od operatorja \n"
+"    uporabi kot vzorec in izvrši se ujemanje vzorcev. Kadar se uporabi \n"
+"    operator `=~', se niz desno od operatorja ujema kot logi�ni izraz.\n"
+"    \n"
+"    Operatorja && in || ne vrednotita IZRAZ2, �e IZRAZ1 zadoš�a za "
+"dolo�itev \n"
+"    vrednosti izraza.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    0 ali 1, odvisno od vrednosti IZRAZA."
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"Pogosta imena spremenljivk lupine in uporaba.\n"
+"    \n"
+"    BASH_VERSION\tPodatki o razli�ici Bash.\n"
+"    CDPATH\tZ dvopi�jem lo�en seznam map za iskanje map,\n"
+"    \t\tdanih kot argumenti ukazu `cd'.\n"
+"    GLOBIGNORE\tZ dvopi�jem lo�en seznam vzorcev z opisom imen datotek,\n"
+"    \t\tki se jih ne upošteva pri razširitvi imena poti.\n"
+"    HISTFILE\tIme datoteke, kjer je shranjena vaša zgodovina ukazov.\n"
+"    HISTFILESIZE\tNajve�je število vrstic, ki jih ta datoteka lahko "
+"vsebuje.\n"
+"    HISTSIZE\tNajve�je število vrstic zgodovine, do katerih izvajajo�a\n"
+"    \t\tlupina lahko dostopa.\n"
+"    HOME\tCelotno ime poti do vaše prijavne mape.\n"
+"    HOSTNAME\tIme trenutnega gostitelja.\n"
+"    HOSTTYPE\tVrsta CPE, na katerem se ta razli�ica Bash izvaja.\n"
+"    IGNOREEOF\tNadzoruje delovanje lupine ob prejemu znaka za konec\n"
+"    \t\tdatoteke kot edini vnos. ÄŒe je nastavljen, je vrednost Å¡tevilo\n"
+"    \t\tznakov za konec datoteke, ki jih je mogo�e videti naenkrat\n"
+"    \t\tv prazni vrstici, preden se lupina kon�a (privzeto 10).\n"
+"    \t\tKo je ponastavljen, znak za konec datoteke ozna�uje konec vnosa.\n"
+"    MACHTYPE\tNiz, ki opiše trenutni sistem, na katerem se izvaja Bash.\n"
+"    MAILCHECK\tKako pogosto, v sekundah, Bash preveri za novo pošto.\n"
+"    MAILPATH\tZ dvopi�jem lo�en seznam imen datotek, za katere Bash\n"
+"    \t\tpreveri za novo pošto.\n"
+"    OSTYPE\tRazli�ica sistema Unix, na katerem se ta razli�ica Bash izvaja.\n"
+"    PATH\tZ dvopi�jem lo�en seznam iskanih map pri iskanju ukazov.\n"
+"    PROMPT_COMMAND\tUkaz, ki se bo izvršil pred izpisom vsakega\n"
+"    \t\tglavnega poziva.\n"
+"    PS1\t\tPrvotni niz poziva.\n"
+"    PS2\t\tDrugotni niz poziva.\n"
+"    PWD\t\tPolno ime poti trenutne mape.\n"
+"    SHELLOPTS\tZ dvopi�jem lo�en seznam omogo�enih možnosti lupine.\n"
+"    TERM\tIme trenutne vrste terminala.\n"
+"    TIMEFORMAT\tOblika izpisa za �asovno statistiko, ki je prikazana\n"
+"    \t\ts pridržanim imenom `time'.\n"
+"    auto_resume\tNe-prazno pomeni, da je beseda ukaza, ki se neodvisno\n"
+"    \t\tpojavlja na �rti, iskana prva na seznamu trenutno zaustavljenih\n"
+"    \t\tposlov. ÄŒe je najdena tam, se ta posel postavi v ospredje.\n"
+"    \t\tVrednost `exact' pomeni, da se mora beseda ukaza natan�no\n"
+"    \t\tujemati z ukazom na seznamu kon�anih poslov.\n"
+"    \t\tVrednost `substring' pomeni, da se beseda ukaza mora ujemati\n"
+"    \t\ts podnizom posla. Vsaka druga vrednost pomeni,\n"
+"    \t\tda mora ukaz biti predpona kon�anega posla.\n"
+"    histchars\tZnaki, ki nadzorujejo razširitev zgodovine in hitro\n"
+"    \t\tzamenjavo. Prvi znak je znak zamenjave \n"
+"    \t\tzgodovine, obi�ajno `!'. Drugi znak je znak \n"
+"    \t\t`hitre zamenjave', obi�ajno `^'.\n"
+"    \t\tTretji znak je znak `opomba zgodovine', obi�ajno `#'.\n"
+"    HISTIGNORE\tZ dvopi�jem lo�en seznam vzorcev, ki so uporabljeni \n"
+"    \t\tza odlo�anje, kateri ukazi naj se shranijo na seznam zgodovine.\n"
+
+#: builtins.c:1821
+#, fuzzy
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Doda mape skladu.\n"
+"    \n"
+"    Doda mapo na vrh sklada map ali pa zavrti sklad, da spremeni\n"
+"    nov vrh sklada v trenutno delovno mapo.\n"
+"    ÄŒe je brez argumentov, izmenja dve vrhnji mapi.\n"
+"    \n"
+"    Možnosti:\n"
+"      -n\tPrepre�i obi�ajno spremembo mape pri dodajanju map skladu,\n"
+"    \ttako da se obdela le sklad.\n"
+"    \n"
+"    Argumenti:\n"
+"      +N\tZavrti sklad, tako da je N-ta mapa (Å¡tetje z leve strani\n"
+"    \tseznama, prikazano z `dirs', za�enši z ni�) na vrhu.\n"
+"    \n"
+"      -N\tZavrti sklad, tako da je N-ta mapa (Å¡tetje z desne strani\n"
+"    \tseznama, prikazano z `dirs', za�enši z ni�) na vrhu.\n"
+"    \n"
+"      dir\tDoda DIR skladu mape na vrhu, kar jo spremeni v novo\n"
+"    \ttrenutno delovno mapo.\n"
+"    \n"
+"    Vgrajena lupina `dirs' prikaže sklad map.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, razen �e je predložen neveljaven argument ali �e\n"
+"    sprememba mape spodleti."
+
+#: builtins.c:1855
+#, fuzzy
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Odstrani mape sklada.\n"
+"    \n"
+"    Odstrani vnose sklada map. ÄŒe je brez argumentov, \n"
+"    odstrani vrhnjo mapo sklada in spremeni v novo vrhnjo mapo.\n"
+"    \n"
+"    Možnosti:\n"
+"      -n\tPrepre�i obi�ajno spremembo mape pri odstranjevanju map\n"
+"    \tsklada, tako da se obdela le sklad.\n"
+"    \n"
+"    Argumenti:\n"
+"      +N\tOdstrani N-ti vnos s Å¡tetjem z leve strani seznama,\n"
+"    \tprikazanega z `dirs', za�enši z ni�. Na primer:\n"
+"    \t`popd +0' odstrani prvo mapo, `popd +1' odstrani drugo.\n"
+"    \n"
+"      -N\tOdstrani N-ti vnos s Å¡tetjem z desne strani seznama,\n"
+"    \tprikazanega z `dirs', za�enši z ni�. Na primer:\n"
+"    \t`popd +0' odstrani zadnjo mapo, `popd +1' odstrani predzadnjo.\n"
+"    \n"
+"    Vgrajena lupina `dirs' prikaže sklad map.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, razen �e je predložen neveljaven argument ali �e\n"
+"    sprememba mape spodleti."
+
+#: builtins.c:1885
+#, fuzzy
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Prikaže sklad map.\n"
+"    \n"
+"    Prikaže seznam trenutno pomnjenih map. Mape najdejo \n"
+"    svojo pot na seznam z ukazom `pushd'; navzgor po seznamu\n"
+"    se lahko vrnete z ukazom `popd'.\n"
+"    \n"
+"    Možnosti:\n"
+"      -c\tpo�isti sklad map z brisanjem vseh predmetov\n"
+"      -l\tne izpiši sorodnih map s predpono `~'  v mojo doma�o mapo\n"
+"      -p\tprikaži sklad map z enim vnosom v vrstici\n"
+"      -v\tizpiši sklad mape z enim vnosom v vrstici z dolo�enim\n"
+"    \tpoložajem v skladu\n"
+"    \n"
+"    Argumenti:\n"
+"      +N\tPrikaže N-ti vnos s štetjem z leve strani seznama, prikazan\n"
+"    \ts pomo�jo map, ko kli�emo brez možnosti, za�enši z ni�.\n"
+"    \n"
+"      -N\tPrikaže N-ti vnos s štetjem z desne strani seznama, prikazan\n"
+"    \ts pomo�jo map, ko kli�emo brez možnosti, za�enši z ni�.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, razen �e je dana neveljavna možnost ali �e pride do napake."
+
+#: builtins.c:1916
+#, fuzzy
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"Nastavi in ponastavi možnosti lupine.\n"
+"    \n"
+"    Spremeni nastavitev vsake možnosti lupine IME_MOŽNOSTI.\n"
+"    Če ni navedenih argumentov možnosti, navede vse možnosti\n"
+"    lupine z ozna�bo, �e so vsi nastavljeni ali ne.\n"
+"    \n"
+"    Možnosti:\n"
+"      -o\tomeji IMENA_MOŽNOSTI tem, ki so dolo�eni za uporabo s `set -o'\n"
+"      -p\tprikaži vsako možnost lupine z navedbo stanja\n"
+"      -q\tprepre�i izhod\n"
+"      -s\tomogo�i (nastavi) vsako IME_MOŽNOSTI\n"
+"      -u\tonemogo�i (ponastavi) vsako IME_MOŽNOSTI\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, �e je IME_MOŽNOSTI omogo�eno; neuspešno, �e je\n"
+"    dana neveljavna možnost ali �e je IME_MOŽNOSTI onemogo�eno."
+
+#: builtins.c:1937
+#, fuzzy
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"Oblikuje in prikaže ARGUMENTE pod nadzorom OBLIKE.\n"
+"    \n"
+"    Možnosti:\n"
+"      -v var\tdodeli izhod spremenljivki SPREMENLJIVKA namesto\n"
+"    \t\tprikaza na standardni izpis\n"
+"    \n"
+"    OBLIKA je niz znakov, ki vsebuje tri vrste predmetov: obi�ajni znaki, \n"
+"    ki so preprosto kopirani na standardni izhod; zaporedja ubežnega "
+"zaporedja, \n"
+"    ki so pretvorjena in kopirana na standardni izhod; in dolo�ila oblike, \n"
+"    od katerih vsako povzro�i prikaz naslednjega zaporednega argumenta.\n"
+"    \n"
+"    Poleg dolo�il standardne oblike, opisanih v printf(1) in printf(3), \n"
+"    printf tolma�i:\n"
+"    \n"
+"      %b\trazširi ubežno zaporedje levih poševnic v ustreznem argumentu\n"
+"      %q\tnavedi argument na na�in, ki je lahko ponovno uporaben kot\n"
+"    \tvnos lupine\n"
+"      %(fmt)T izpiši niz datuma-�asa, ki izhaja iz uporabe FMT-ja kot niza "
+"oblike \n"
+"            za strftime(3)\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, razen �e je dana neveljavna možnost ali �e pride do "
+"napake\n"
+"    branja ali dodelitve."
+
+#: builtins.c:1971
+#, fuzzy
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Navede, kako bodo argumenti dopolnjeni s pomo�jo Readline.\n"
+"    \n"
+"    Za vsako IME navedi, kako bodo argumenti dopolnjeni. Če ni predloženih\n"
+"    možnosti, so obstoje�e dolo�itve dopolnjevanja prikazane na na�in, ki "
+"jim\n"
+"    omogo�a, da se ponovno uporabijo kot vnos.\n"
+"    \n"
+"    Možnosti:\n"
+"      -p\tprikaži obstoje�e dolo�itve dopolnjevanja v obliki za ve�kratno\n"
+"    \tuporabo\n"
+"      -r\todstrani dolo�itev dopolnjevanja za vsako IME ali �e IMENA\n"
+"    \tniso predložena, vse dolo�itve dopolnjevanja\n"
+"      -D\tuveljavi dopolnjevanja in dejanja kot privzeta za ukaze brez\n"
+"    \tdolo�enih dopolnjevanj\n"
+"      -E\tuveljavi dopolnjevanja in dejanja v \"praznih\" ukazih -- \n"
+"    \tposkus dopolnjevanja v prazni vrstici\n"
+"    \n"
+"    Ko se poskuša dopolnjevanje, se dejanja uveljavijo v takšnem\n"
+"    vrstnem redu, kot z velikimi �rkami zgoraj navedene možnosti.\n"
+"    Možnost -D ima prednost pred -E.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, razen �e je predložena neveljavna možnost ali �e pride\n"
+"    do napake."
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Prikaže možne dopolnitve, odvisne od možnosti.\n"
+"    \n"
+"    Namenjen je za uporabo znotraj funkcije lupine za ustvarjanje možnih\n"
+"    dopolnitev. Če je izbirni argument BESEDE predložen, se ustvarijo\n"
+"    ujemanja proti BESEDI.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, razen �e je predložena neveljavna možnost ali �e pride\n"
+"    do napake."
+
+#: builtins.c:2016
+#, fuzzy
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"Spremeni ali prikaže možnosti dopolnjevanja.\n"
+"    \n"
+"    Spremeni možnosti dopolnjevanja za vsako IME oz. trenutno izvedeno \n"
+"    dopolnitev, �e IMENA niso predložena. Če ni danih MOŽNOSTI,\n"
+"    prikaže možnosti dopolnjevanja za vsako IME ali trenutno dolo�itev\n"
+"    dopolnjevanja.\n"
+"    \n"
+"    Možnosti:\n"
+"    \t-o možnost\tNastavi možnost dopolnitve MOŽNOST za vsako IME\n"
+"    \t-D\t\tSpremeni možnosti za \"privzeto\" dopolnitev ukaza\n"
+"    \t-E\t\tSpremeni možnosti za \"prazno\" dopolnitev ukaza\n"
+"    \n"
+"    Uporaba `+o' namesto `-o' izklopi navedeno možnost.\n"
+"    \n"
+"    Argumenti:\n"
+"    \n"
+"    Vsako IME se nanaša na ukaz, za katerega mora že predhodno biti\n"
+"    dolo�eno dolo�ilo dopolnjevanja z uporabo vgrajene lupine `complete'.\n"
+"    Če ni predloženih IMEN, mora compopt biti klican s strani funkcije, \n"
+"    ki trenutno ustvarja dopolnjevanja in možnosti za tega trenutno \n"
+"    izvajajo�ega ustvarjalnika dopolnjevanj se bodo spremenile.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, razen �e je predložena neveljavna možnost ali pa IME\n"
+"    nima dolo�enega dolo�ila dopolnjevanja."
+
+#: builtins.c:2047
+#, fuzzy
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"Prebere vrstice s standardnega vnosa  v spremenljivko zabeleženega polja.\n"
+"    \n"
+"    Prebere vrstice iz standardnega vnosa v spremenljivko zabeleženega "
+"polja \n"
+"    POLJE ali iz opisnika datotek FD, �e je predložena možnost -u.\n"
+"    Spremenljivka MAPFILE je privzeto POLJE.\n"
+"    \n"
+"    Možnosti:\n"
+"      -n števec\tKopiraj najve� vrstic ŠTEVCA. Če je ŠTEVEC 0, se kopirajo\n"
+"    \tvse vrstice.\n"
+"      -O izvor\tZa�ni dodeljevati POLJU pri kazalu IZVOR. Privzeto kazalo je "
+"0.\n"
+"      -s Å¡tevec \tZavrzi prve prebrane vrstice Å TEVCA.\n"
+"      -t\t\tIz vsake prebrane vrstice odstrani vmesno novo vrstico.\n"
+"      -u fd\t\tBeri vrstice iz opisnika datotek FD namesto standardnega\n"
+"    \tvnosa.\n"
+"      -C povratni_klic\tOvrednoti POVRATNI_KLIC vsaki�, ko so prebrane\n"
+"    \tvrstice DELOV.\n"
+"      -c del\tNavedi Å¡tevilo vrstic, prebranih med vsakim klicem\n"
+"    \tPOVRATNEGA_KLICA.\n"
+"    \n"
+"    Argumenti:\n"
+"      POLJE\t\tIme spremenljivke polja za uporabo za podatke datotek\n"
+"    \n"
+"    Če je -C predložen brez -c, je privzet del 5000. Ko je POVRATNI_KLIC\n"
+"    ovrednoten, je predloženo kazalo naslednjega predmeta polja, ki bo\n"
+"    dodeljen in vrstica, ki bo dodeljena temu predmetu kot dodatni\n"
+"    argumenti.\n"
+"    \n"
+"    Če ni predloženo z izrecnim izvorom, bo mapfile po�istil POLJE, preden\n"
+"    ji bo dodeljen.\n"
+"    \n"
+"    Stanje kon�anja:\n"
+"    Vrne uspešno, razen �e je dana neveljavna možnost oz. je POLJE samo\n"
+"    za branje ali pa ni zabeleženo polje."
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Prebere vrstice iz datoteke v spremenljivko polja.\n"
+"    \n"
+"    Je sopomenka za `mapfile'."
+
+#, fuzzy
+#~ msgid "Copyright (C) 2019 Free Software Foundation, Inc."
+#~ msgstr "Avtorske pravice (C) 2011 Free Software Foundation, Inc."
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "Vrne vsebino trenutnega klica podprograma.\n"
+#~ "    \n"
+#~ "    Brez EXPR vrne "
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process: opravilo %5ld (%s) v the_pipeline"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "Neznan signal #"
+
+#~ msgid ""
+#~ "License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl."
+#~ "html>\n"
+#~ msgstr ""
+#~ "Dovoljenje GPLv2+: GNU GPL razli�ica 2 ali kasnejše <http://gnu.org/"
+#~ "licenses/gpl.html>\n"
+
+#~ msgid ":"
+#~ msgstr ":"
+
+#~ msgid "true"
+#~ msgstr "prav"
+
+#~ msgid "false"
+#~ msgstr "napak"
+
+#~ msgid "times"
+#~ msgstr "krat"
diff --git a/po/sr.gmo b/po/sr.gmo
new file mode 100644
index 0000000..6e2fdf9
--- /dev/null
+++ b/po/sr.gmo
diff --git a/po/sr.po b/po/sr.po
new file mode 100644
index 0000000..a5d5efd
--- /dev/null
+++ b/po/sr.po
@@ -0,0 +1,5951 @@
+# Serbian translation for bash.
+# Copyright © 2020 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+# Миро�лав �иколић <miroslavnikolic@rocketmail.com>, 2014—2020.
+msgid ""
+msgstr ""
+"Project-Id-Version: bash-5.0\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2020-03-31 15:52+0200\n"
+"Last-Translator: Миро�лав �иколић <miroslavnikolic@rocketmail.com>\n"
+"Language-Team: Serbian <(nothing)>\n"
+"Language: sr\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
+"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+"X-Generator: Virtaal 0.7.1\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "лош индек� низа"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr "%s: уклањам атрибут упуте назива"
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: не могу да претворим попи�ани низ у придружив"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: неи�праван кључ придруживог низа"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: не могу да доделим у не-бројевни попи�"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr "%s: %s: мора кори�тити индек� приликом додељивања придруживог низа"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: не могу да направим: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr "баш_изврши_јуник�_наредбу: не могу да нађем мапу кључа за наредбу"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: први не-празан знак није \""
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "нема затварајућег „%c“ у %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: недо�таје раздвојник двотачке"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "„%s“: не могу да развежем"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr "ширење заграде: не могу да доделим меморију за „%s“"
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr "ширење заграде: ни�ам у�пео да доделим меморију за %u елемента"
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr "ширење заграде: ни�ам у�пео да доделим меморију за „%s“"
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "„%s“: неи�праван назив алија�а"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "уређивање реда није укључено"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "„%s“: неи�праван назив мапе кључа"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: не могу да читам: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "„%s“: непознат назив функције"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "„%s“ није привезано ни за један кључ.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "„%s“ не може бити призвано путем"
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "„%s“: не могу да развежем"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "број петљи"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "једино има �ми�ла у петљи „for“, „while“, или „until“"
+
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Даје �адржај текућег позива подрутине.\n"
+"    \n"
+"    Без ИЗР�З�, даје „$ред $назив_датотеке“.  Са ИЗР�ЗОМ, даје\n"
+"    „$ред $подрутина $назив_датотеке“; овај додатни податак може бити\n"
+"    коришћен за обезбеђивање праћења �премника.\n"
+"    \n"
+"    Вредно�т ИЗР�З� показује колико кадрова позива да �е иде уназад пре\n"
+"    текућег; први кадар је кадар 0.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје 0 о�им ако шкољка не извршава функцију шкољке или ИЗР�З\n"
+"    није и�праван."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "„HOME“ није подешено"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "превише аргумената"
+
+#: builtins/cd.def:342
+msgid "null directory"
+msgstr "ништаван директоријум"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "„OLDPWD“ није подешено"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "%d. ред:"
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "упозорење:"
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: употреба:"
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: опција захтева аргумент"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: потребан је бројевни аргумент"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: не по�тоји"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: неи�правна опција"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: неи�праван назив опције"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "„%s“: није и�праван одредник"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "неи�праван октални број"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "неи�праван хек�адецимални број"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "неи�праван број"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: неи�правна одредба �игнала"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "„%s“: није пиб или и�правна одредба по�ла"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: променљива �амо за читање"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: „%s“ је ван оп�ега"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "аргумент"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "„%s“ је ван оп�ега"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: нема таквог по�ла"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: нема управљања по�лом"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "нема управљања по�лом"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: ограничено"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "ограничено"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: није уграђено�т шкољке"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "грешка пи�ања: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "грешка подешавања о�обина терминала: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "грешка добављања о�обина терминала: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: грешка довлачења текућег директоријума: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: неја�на одредба по�ла"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr "помоћ није до�тупна у овом издању"
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: не могу да ра�поде�им: „%s“ је �амо за читање"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: не могу да ра�поде�им"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: неи�праван назив радње"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: нема одредбе довршавања"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "упозорење: опција „-F“ можда неће радити како �те очекивали"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "упозорење: опција „-C“ можда неће радити како �те очекивали"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "тренутно не обавља функцију довршавања"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "може бити коришћено једино у функцији"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr "%s: променљива упуте не може бити низ"
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr "%s: �амоупућивање променљиве упуте назива није дозвољено"
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s: кружна упута назива"
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "%s: неи�праван назив променљиве за упуту назива"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "не можете кори�тити „-f“ да направите функције"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: функција �амо за читање"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr "%s: додела низа цитираног �поја је за�тарела"
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: не могу да уништим променљиве низа на овај начин"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: не могу да претворим придруживи низ у попи�ани"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "променљиво учитавање није до�тупно"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "не могу да отворим дељени предмет „%s“: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "не могу да нађем „%s“ у дељеном предмету „%s“: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: није динамички учитано"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr "функција учитавања за „%s“ није у�пела (%d): није учитано"
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: није динамички учитано"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: не могу да обришем: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: је директоријум"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: није обична датотека"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: датотека је превелика"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: не могу да извршим бинарну датотеку"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: не могу да извршим: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "одјави\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "није шкољка пријављивања: кори�тите „exit“"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Има зау�тављених по�лова.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Има покренутих по�лова.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "нема такве наредбе"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "одредба и�торијата"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: не могу да отворим привремену датотеку: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "текуће"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "по�ао „%d“ је започет без управљања по�лом"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: неи�правна опција -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: опција захтева аргумент -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "хеширање је и�кључено"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: хеш табела је празна\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "покреће\tнаредбу\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "�аредбе шкољке које одговарају кључној речи `"
+msgstr[1] "�аредбе шкољке које одговарају кључним речима `"
+msgstr[2] "�аредбе шкољке које одговарају кључним речима `"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"нема тема помоћи које одговарају „%s“.  Покушајте „help help“ или „man -k "
+"%s“ или „info %s“."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: не могу да отворим: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Ове наредбе шкољке �у одређене изнутра.  Укуцајте „help“ за овај �пи�ак.\n"
+"Укуцајте „help name“ да �азнате више о функцији „name“.\n"
+"Кори�тите „info bash“ да �азнате више о шкољци уопште.\n"
+"Кори�тите „man -k“ или „info“ да �азнате више о наредбама ван �пи�ка.\n"
+"\n"
+"Звездица (*) поред назива значи да је наредба и�кључена.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "не могу кори�тити више од једног „-anrw“"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "положај и�торијата"
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: неи�правна ознака времена"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: није у�пело ширење и�торијата"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: није у�пело „inlib“"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "ни�у допуштене друге опције уз „-x“"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: аргументи морају бити проце�и или ИБ-ови по�ла"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "�епозната грешка"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "очекиван је израз"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: није попи�ани низ"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: неи�правна одредба опи�ника датотеке"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: неи�праван опи�ник датотеке: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: неи�праван број реда"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: неи�правно порекло низа"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: неи�правна количина опозива"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "празан назив променљиве низа"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "потребна је подршка променљиве низа"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "„%s“: недо�таје знак запи�а"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "„%c“: неи�правна одредба запи�а времена"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "„%c“: неи�праван знак запи�а"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "упозорење: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "проблем обраде запи�а: %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "недо�таје хек�адецимална цифра за \\x"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "недо�таје цифра уникода за \\%c"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "нема другог директоријума"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s: неи�праван аргумент"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<нема текућег директоријума>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "празан �премник директоријума"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "попи� �премника директоријума"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Приказује �пи�ак тренутно запамћених директоријума.  Директоријуми\n"
+"    налазе �вој пут на �пи�ку наредбом „pushd“; можете да �е\n"
+"    вратите назад на �пи�ак наредбом „popd“.\n"
+"    \n"
+"    Опције:\n"
+"      -c\tчи�ти �премник директоријума бри�ањем �вих елемената\n"
+"      -l\tне и�пи�ује тилдом префик�ована издања директоријума\n"
+"    \t        који �е одно�е на ваш лични директоријум\n"
+"      -p\tи�пи�ује �премник директоријума �а једним уно�ом у реду\n"
+"      -v\tи�пи�ује �премник директоријума �а једним уно�ом у реду\n"
+"    \t        �а префик�ом његовог положаја у �премнику\n"
+"    \n"
+"    �ргументи:\n"
+"      +N\tПриказује н-ти уно� бројећи � лева на �пи�ку приказаном\n"
+"    \t        директоријумима када �е призову опцијама, почевши од нуле.\n"
+"    \n"
+"      -N\tПриказује н-ти уно� почевши � де�на на �пи�ку приказаном\n"
+"\t        директоријумима када �е призову без опција, почевши од нуле."
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Додаје директоријум на врх �премника директоријума, или заокреће\n"
+"    �премник, чинећи нови први �премника текућим радним директоријумом.\n"
+"    Без аргумената, замењује прва два директоријума.\n"
+"    \n"
+"    Опције:\n"
+"      -n\tПоти�кује нормалну замену директоријума приликом додавања\n"
+"    \t        директоријума у �премник, тако да �е ради �амо �а �премником.\n"
+"    \n"
+"    �ргументи:\n"
+"      +N\tЗаокреће �премник тако да н-ти директоријум (бројећи\n"
+"    \t        � лева на �пи�ку кога приказује „dirs“, почевши нулом)\n"
+"    \t        буде на врху.\n"
+"    \n"
+"      -N\tЗаокреће �премник тако да н-ти директоријум (бројећи\n"
+"    \t        � де�на на �пи�ку кога приказује „dirs“, почевши нулом)\n"
+"    \t        буде на врху.\n"
+"    \n"
+"      dir\tДодаје ДИРЕКТОРИЈУМ у �премник директоријума на врху,\n"
+"                начинивши га новим текућим радним директоријумом.\n"
+"    \n"
+"    Уграђено „dirs“ приказује �премник директоријума."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Уклања уно�е из �премника директоријума.  Без аргумената, уклања први\n"
+"    директоријум из �премника, и пребацује на нови први директоријум.\n"
+"    \n"
+"    Опције:\n"
+"      -n\tПоти�кује нормалну замену директоријума приликом уклањања\n"
+"    \t        директоријума из �премника, тако да �е ради �амо �а "
+"�премником.\n"
+"    \n"
+"    �ргументи:\n"
+"      +N\tУклања н-ти уно� бројећи � лева на �пи�ку кога приказује\n"
+"    \t        „dirs“, почевши од нуле.  �а пример: „popd +0“ уклања\n"
+"    \t        први директоријум, „popd +1“ други.\n"
+"    \n"
+"      -N\tУклања н-ти уно� бројећи � де�на на �пи�ку кога приказује\n"
+"    \t        „dirs“, почевши од нуле.  �а пример: „popd -0“ уклања\n"
+"    \t        по�ледњи директоријум, „popd -1“ претпо�ледњи.\n"
+"    \n"
+"    Уграђено „dirs“ приказује �премник директоријума."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: неи�правна одредба времен�ког и�тека"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "грешка читања: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr "могу једино да „и�пишем“ из функције или изворног �пи�а"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "не могу и�товремено да ра�поде�им функцију и променљиву"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: није променљива низа"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: није функција"
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr "%s: не могу да извезем"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "број помака"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "не могу и�товремено да поде�им и да ра�поде�им опције шкољке"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: неи�праван назив опције шкољке"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "потребан је аргумент назива датотеке"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: ни�ам пронашао датотеку"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "не могу да обу�тавим"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "не могу да обу�тавим шкољку пријављивања"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s је измењен у п�еудоним „%s“\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "„%s“ је кључна реч шкољке\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s: је функција\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s: је нарочита уграђено�т шкољке\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s: је�те уграђено�т шкољке\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "„%s“ је�те „%s“\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "„%s“ је хеширано (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: неи�праван аргумент ограничења"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "„%c“: лоша наредба"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: не могу да добавим ограничење: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "ограничење"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: не могу да изменим ограничење: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "октални број"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "„%c“: неи�праван оператер �имболичког режима"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "„%c“: неи�праван знак �имболичког режима"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " ред "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "по�ледња наредба: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Прекидам..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr "ПОД�ЦИ: "
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "непозната грешка наредбе"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "лоша вр�та наредбе"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "лош �пајач"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "лош �кок"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: не�везана променљива"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\aи�текло је време чекајући на улаз: �ам �е одјављујем\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "не могу да преу�мерим �тандардни улаз из „/dev/null:“: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "З�ПИСВРЕМЕ��: „%c“: неи�праван знак запи�а"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr "изврши_копроц: копроце� [%d:%s] још увек по�тоји"
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "грешка �појке"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr "процена: премашен је највећи ниво угнежђивања процене (%d)"
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr "%s: премашен је највећи ниво угнежђивања извора (%d)"
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr "%s: премашен је највећи ниво угнежђивања функције (%d)"
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: ограничено: не могу да наведем / у називима наредби"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: нема такве наредбе"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: лош тумач"
+
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: не могу да извршим бинарну датотеку: %s"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "„%s“: је�те по�ебна уграђено�т"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "не могу да удво�тручим „fd %d“ у „fd %d“"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "премашен је ниво дубачења израза"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "недоток �премника дубачења"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "�адржајна грешка у изразу"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "покушано је додељивање у не-променљиву"
+
+#: expr.c:530
+msgid "syntax error in variable assignment"
+msgstr "�адржајна грешка у додели променљиве"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "дељење 0"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "грешка: лош �имбол доделе израза"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "„:“ је очекивано за у�ловни израз"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "изложилац је мањи од 0"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "одредник је очекиван након пре-увећања или пре-умањења"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "недо�таје )"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "�адржајна грешка: очекиван је операнд"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "�адржајна грешка: неи�праван аритметички оператор"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (�имбол грешке је „%s“)"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "неи�правна аритметичка о�нова"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: неи�праван број реда"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "вредно�т је превише велика за о�нову"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: грешка израза\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: не могу да при�тупим родитељ�ком директоријуму"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "не могу да поништим режим без-кашњења за фд „%d“"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr "не могу да доделим нови опи�ник датотеке за улаз баша из фд „%d“"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input: већ по�тоји међумеморија за нови фд „%d“"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: „pgrp“ �појка"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "и�цепљени пиб „%d“ �е јавља у покренутом по�лу „%d“"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "бришем зау�тављени по�ао „%d“ �а групом проце�а %ld"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process: пиб %5ld (%s) је означен да је још жив"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: нема таквог пиб-а"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Сигнал %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Урађен"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Зау�тављен"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Зау�тављен(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "Покренут"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Урађен(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Изађи из „%d“"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "�епознато �тање"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(језгрени избачај)"
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (wd: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "�етпгиб порода (%ld у %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: пиб %ld није пород ове шкољке"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: �ема запи�а о проце�у %ld"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: по�ао „%d“ је зау�тављен"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: нема таквог по�ла"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: по�ао је завршио"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: по�ао „%dд је већ у позадини"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr "waitchld: укључујем „WNOHANG“ да избегнем неодређени блок"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: ред %d:"
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (језгрени избачај)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(„wd“ �ада: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: није у�пело „getpgrp“"
+
+#: jobs.c:4447
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: нема контроле по�ла у позадини"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: ди�циплина реда"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "не могу да поде�им групу проце�а терминала (%d)"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "нема управљања по�лом у овој шкољци"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: тврдња није у�пела: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d: тврдња је лоше изведена\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "непознато"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: блок на �лободном �пи�ку је препи�ан"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: позвана �а већ о�лобођеним аргументом блока"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: позвана �а недодељеним аргументом блока"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: откривена је недовољно�т тока; mh_n-бајтова је ван оп�ега"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: откривена је недовољно�т тока; mh_n-бајтова је ван оп�ега"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: почетна и крајња величина дела �е разликују"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: позвана �а недодељеним аргументом блока"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc: откривена је недовољно�т тока; mh_n-бајтова је ван оп�ега"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc: откривена је недовољно�т тока; mh_n-бајтова је ван оп�ега"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: почетна и крајња величина дела �е разликују"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: табела доделе је пуна �а „FIND_ALLOC“?\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: „%p“ је већ у табели као додељено?\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: „%p“ је већ у табели као �лободно?\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "неи�правна о�нова"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: непознат домаћин"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: неи�правна у�луга"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: лоша одредба путање мреже"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "радње мреже ни�у подржане"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: не могу да изменим језик (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: не могу да изменим језик (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: не могу да изменим језик (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: не могу да изменим језик (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "Имате пошту у $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "Имате нову пошту у $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "Пошта у „%s“ је прочитана\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "�адржајна грешка: потребан је аритметички израз"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "�адржајна грешка: није очекивано „;“"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "�адржајна грешка: „((%s))“"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: лоша вр�та упут�тва „%d“"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr "овде-документ у %d. реду је ограничен крајем-датотеке (тражи �е „%s“)"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr "make_redirection: упут�во преу�мерења „%d“ је ван оп�ега"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+"shell_getc: величина_реда_улаза_шкољке (%zu) је премашила ��ЈВЕЋУ_ВЕЛИЧИ�У "
+"(%lu): ред је �краћен"
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr "премашен је највећи број „овде-документ“"
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "неочекивани крај датотеке приликом тражења поклапања „%c“"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "неочекивани крај датотеке приликом тражења „]]“"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "�адржајна грешка у у�ловном изразу: неочекивани �имбол „%s“"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "�адржајна грешка у у�ловном изразу"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "неочекивани �имбол „%s“, очекивана је )"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "очекивана је )"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "неочекивани аргумент „%s“ у�ловном једночланом оператору"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "неочекивани аргумент у�ловном једночланом оператору"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "неочекивани �имбол „%s“, очекиван је у�ловни двочлани оператор"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "очекиван је у�ловни двочлани оператор"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "неочекивани аргумент „%s“ у�ловном двочланом оператору"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "неочекивани аргумент у�ловном двочланом оператору"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "неочекивани �имбол „%c“ у у�ловној наредби"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "неочекивани �имбол „%s“ у у�ловној наредби"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "неочекивани �имбол „%d“ у у�ловној наредби"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "�адржајна грешка близу неочекиваног �имбола „%s“"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "�адржајна грешка близу „%s“"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "�адржајна грешка: неочекивани крај датотеке"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "�адржајна грешка"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Кори�тите „%s“ да напу�тите шкољку.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "неочекивани крај датотеке приликом тражења поклапајуће )"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "довршавање: ни�ам нашао функцију „%s“"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr "programmable_completion: %s: могуће понављање покушаја"
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: �ИШТ�В�� ОДРЕДБ�_ДОВРШ�В�Њ�"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: лош �пајач „%d“"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: неи�праван опи�ник датотеке"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: �ИШТ�В�� указивач датотеке"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != fileno xtrace fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: „%c“: неи�праван знак запи�а"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "опи�ник датотеке је ван оп�ега"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: неја�но преу�мерење"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: не могу да препишем по�тојећу датотеку"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: ограничено: не могу да преу�мерим излаз"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "не могу да направим привремену датотеку за документ-овде: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: не могу да доделим фд променљивој"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "„/dev/(tcp|udp)/домаћин/прикључник“ није подржано без умрежавања"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "грешка преу�мерења: не могу да удво�тручим фд"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "не могу да нађем „/tmp“, направите га!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "„/tmp“ мора бити и�праван назив директоријума"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr "режим уредног и�пи�а је занемарен у међудеј�твеним шкољкама"
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: неи�правна опција"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "не могу да поде�им јиб на %d: �тварни јиб %d"
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "не могу да поде�им гиб на %d: �тварни гиб %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr "не могу да покренем прочишћавача; режим прочишћавања је и�кључен"
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr "%s: је директоријум"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "�емам назив!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "Гну баш, издање %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Употреба:\t%s [Гнуова дуга опција] [опција] ...\n"
+"        \t%s [Гнуова дуга опција] [опција] датотека-�пи�а ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "Гнуове дуге опције:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Опције шкољке:\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t„-ilrsD“ или наредба „-c“ или -O шопц_опција\t\t(призивање �амо)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t„-%s“ или опција „-o“\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr "Укуцајте „%s -c \"help set\"“ за више података о опцијама шкољке.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr "Укуцајте „%s -c help“ за више података о уграђеним наредбама шкољке.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "Кори�тите наредбу „bashbug“ да изве�тите о грешкама.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr "Матична �траница баша: <http://www.gnu.org/software/bash>\n"
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr "Општа помоћ коришћења Гну �офтвера: <http://www.gnu.org/gethelp/>\n"
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: неи�правна операција"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "�етачан �игнал"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Обу�тави"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Прекини"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Изађи"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "�еи�правна ин�трукција"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "Прати/ухвати БПТ"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "Ин�трукција „ABORT“"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "Ин�трукција „EMT“"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Изузетак покретног зареза"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Убијен"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Грешка �абирнице"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "�еу�пех �егментације"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Лош �и�тем�ки позив"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Сломљена �појка"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "�ларм"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Окончано"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Хитан УИ у�лов"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Зау�тављен (�игнал)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "�а�тави"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Пород је преминуо или зау�тављен"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Зау�тављен (улаз конзоле)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Зау�тављен (излаз конзоле)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "Спреман на У/И"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "Ограничење проце�ора"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "Ограничење датотеке"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "�ларм (виртуелни)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "�ларм (профил)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Промењени прозор"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Закључавање �нимка"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Кори�нички �игнал 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Кори�нички �игнал 2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "Улазни ХФТ подаци на чекању"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "неизбежан пад напајања"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "неизбежан пад �и�тема"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "пребацује проце� на други проце�ор"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "грешка програмирања"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "О�игуран је режим ХФТ праћења"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "Понови је и�праћен режим ХФТ праћења"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "�из ХФТ звука је завршен"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "Захтев за подацима"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "�епознат �игнал #%d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "лоша замена: нема затварајуће „%s“ у „%s“"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: не могу да доделим �пи�ак члану низа"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "не могу да начиним �појку за замену проце�а"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "не могу да начиним пород за замену проце�а"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "не могу да отворим именовану �појку „%s“ за читање"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "не могу да отворим именовану �појку „%s“ за пи�ање"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "не могу да удво�тручим именовану �појку „%s“ као фд %d"
+
+#: subst.c:6213
+msgid "command substitution: ignored null byte in input"
+msgstr "замена наредбе: занемарих ништавни бајт у улазу"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "не могу да начиним �појку за замену наредбе"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "не могу да начиним пород за замену наредбе"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute: не могу да удво�тручим �појку као фд 1"
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: неи�праван назив променљиве за упуту назива"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: неи�правно по�редно ширење"
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr "%s: неи�праван назив променљиве"
+
+#: subst.c:7256
+#, c-format
+msgid "%s: parameter not set"
+msgstr "%s: параметар није подешен"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: параметар је ништаван или није подешен"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: израз подни�ке < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: лоша замена"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: не могу дадоделим на овај начин"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr "будућа издања шкољке ће приморати процену као аритметичку замену"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "лоша замена: нема затварајућег „`“ у „%s“"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "нема поклапања: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "очекиван је аргумент"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: очекиван је израз целог броја"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "очекивана је )"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "очекивана је ), а пронађена %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: очекиван је двочлани оператор"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: очекиван је једночлани оператор"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "недо�таје ]"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "�адржајна грешка: није очекивано „;“"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "неи�праван �игнални број"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr "руковалац изузетком: премашен је највећи ниво руковаоца изузецима (%d)"
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: лоша вредно�т у „trap_list[%d]“: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps: руковалац �игналом је „SIG_DFL“, поново шаљем %d (%s) "
+"мени �амом"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: лош �игнал %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "грешка увоза одреднице функције за „%s“"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "ниво шкољке (%d) је преви�ок, поново по�тављам на 1"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: нема �адржаја функције на текућем до�егу"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: вредно�ти не може бити додељена вредно�т"
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr "%s: додељујем цео број упути назива"
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variable: нема �адржаја функције на текућем до�егу"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s има ништавну ни�ку извоза"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "неи�праван знак %d у ни�ци извоза за „%s“"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "нема = у ни�ци извоза за „%s“"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr "pop_var_context: глава променљивих шкољке није �адржајно�т функције"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: нема �адржаја општих променљивих"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr "pop_scope: глава променљивих шкољке није привремени до�ег окружења"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: не могу да отворим као Д�ТОТЕКУ"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: неи�правна вредно�т за опи�ник праћења датотеке"
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s: вредн�от �агла�но�ти је ван оп�ега"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "�утор�ка права (C) 2012 Задужбина �лободног �офтвера, Доо."
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"Дозвола ОЈЛи3+: Гнуова ОЈЛ издање 3 или ка�није <http://gnu.org/licenses/gpl."
+"html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "Гну баш, издање %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr ""
+"Ово је �лободан �офтвер; �лободни �те да га мењате и да га ра�подељујете."
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "�ема �ИК�КВЕ Г�Р��ЦИЈЕ у оквирима дозвољеним законом."
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: не могу да доделим %lu бајта (%lu бајта је додељено)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: не могу да доделим %lu бајта"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: не могу да доделим %lu бајта (%lu бајта је додељено)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: не могу да доделим %lu бајта"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [назив[=вредно�т] ... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] назив [назив ...]"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpsvPSVX] [-m мапа кључа] [-f датотека] [-q назив] [-u назив] [-r низ "
+"кључа] [-x низ кључа:наредба-шкољке] [низ кључа:функција-читањареда или "
+"наредба-читањареда]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [уграђено�т-шкољке [аргумент ...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [израз]"
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]] [-@]] [дир]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] command [арг ...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilnrtux] [-p] [назив[=вредно�т] ...]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilnrtux] [-p] назив[=вредно�т] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [опција] назив[=вредно�т] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [арг ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [арг ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f датотека] [назив ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [арг ...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts ни�ка_опција назив [арг]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a назив] [наредба [аргументи ...]] [преу�мерење ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr "fc [-e е-назив] [-lnr] [прво] [по�ледње] или fc -s [пут=реп] [наредба]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [одредба_по�ла ...]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [одредба_по�ла ...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p путања] [-dt] [назив ...]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [шаблон ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d померај] [n] или history -anrw [датотека] или history -ps "
+"arg [аргумент...]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [одредба_по�ла ...] или jobs -x наредба [аргументи]"
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [одредба_по�ла ... | пид ...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s одредба-�игнала | -n бр.�игнала | -sigspec] пиб | одредба_по�ла ... "
+"или kill -l [одредба_по�ла]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let arg [аргумент ...]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a низ] [-d ограничи] [-i тек�т] [-n н-знак] [-N н-знак] [-p "
+"упит] [-t времен�ки рок] [-u фд] [назив ...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o назив-опције] [--] [арг ...]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [назив ...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [назив[=вредно�т] ...] или export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [назив[=вредно�т] ...] или readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source датотека [аргументи]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". датотека [аргументи]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [израз]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ арг... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[арг] одредба_�игнала ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] назив [назив ...]"
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [ограничење]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [режим]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-fn] [иб ...]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [пиб ...]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for ��ЗИВ [у РЕЧИМ� ... ] ; do ��РЕДБЕ; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( израз1; израз2; израз3 )); do ��РЕДБЕ; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select ��ЗИВ [у РЕЧИМ� ... ;] do ��РЕДБЕ; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] �појни_ред"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case РЕЧ у [Ш�БЛО� [| Ш�БЛО�]...) ��РЕДБЕ ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if ��РЕДБЕ; then ��РЕДБЕ; [ elif ��РЕДБЕ; then ��РЕДБЕ; ]... [ else "
+"��РЕДБЕ; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while ��РЕДБЕ; do ��РЕДБЕ; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until ��РЕДБЕ; do ��РЕДБЕ; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [��ЗИВ] наредба [преу�мерења]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function name { ��РЕДБЕ ; } или name () { ��РЕДБЕ ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ ��РЕДБЕ ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "job_spec [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( израз ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ израз ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "variables — �азиви и значења неких променљивих шкољке"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | дир]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [називопције ...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v променљива] format [аргументи]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o опција] [-A радња] [-G "
+"општапутања] [-W �пи�акречи]  [-F функција] [-C наредба] [-X путањау�лова] [-"
+"P префик�] [-S �уфик�] [назив ...]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o опција]  [-A радња] [-G општапутања] [-W "
+"�пи�акречи] [-F функција] [-C наредба] [-X путањау�лова] [-P префик�] [-S "
+"�уфик�] [реч]"
+
+#: builtins.c:239
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o опција] [-DEI] [назив ...]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-d раздвој] [-n број] [-O порекло] [-s број] [-t] [-u фд] [-C "
+"опозив] [-c количина] [низ]"
+
+#: builtins.c:244
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-d гранич] [-n број] [-O порекло] [-s број] [-t] [-u фд] [-C "
+"опозив] [-c количина] [низ]"
+
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Одређује или приказује п�еудониме.\n"
+"    \n"
+"    Без аргумената, „alias“ и�пи�ује �пи�ак п�еудонима у поново\n"
+"    употрбљивом облику „alias ��ЗИВ=ВРЕД�ОСТ“ на �тандардном излазу.\n"
+"    \n"
+"    У �упротном, п�еудоним �е одређује за �ваки ��ЗИВ чија ВРЕД�ОСТ је "
+"дата.\n"
+"    Претходећи размак у ВРЕД�ОСТИ доводи до тога да �ледећа реч бива\n"
+"    проверена за заменом п�еудонима када је п�еудоним раширен.\n"
+"    \n"
+"    Опције:\n"
+"      -p\tи�пи�ује �ве одређене п�еудониме у поново употребљивом облику\n"
+"    \n"
+"    Излазно �тање:\n"
+"    „alias“ даје тачно�т о�им ако је до�тављен ��ЗИВ за који ниједан\n"
+"    п�еудоним није одређен."
+
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Уклања �ваки ��ЗИВ �а �пи�ка одређених п�еудонима.\n"
+"    \n"
+"    Опције:\n"
+"      -a\tуклања �ве одреднице п�еудонима\n"
+"    \n"
+"    Резултат је у�пешан о�им ако ��ЗИВ није по�тојећи п�еудоним."
+
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"Подешава �везе та�тера читања реда и променљиве.\n"
+"    \n"
+"    Повезује низ та�тера ка функцији читања реда или макроу, или подешава\n"
+"    променљиву читања реда.  Синтак�а не-опционог аргумента је и�та као и\n"
+"    она која �е налази у „~/.inputrc“, али мора бити про�леђена као један\n"
+"    аргумент: нпр., bind „\"\\C-x\\C-r\": re-read-init-file“.\n"
+"    \n"
+"    Опције:\n"
+"      -m  мапа та�тера                Кори�ти М�ПУ_Т�СТЕР� као мапу та�тера "
+"за трајање ове\n"
+"                                      наредбе.  Прихватљиви називи мапе "
+"та�тера �у: „emacs,\n"
+"                                      emacs-standard, emacs-meta, emacs-"
+"ctlx, vi, vi-move,\n"
+"                                      vi-command, и vi-insert“.\n"
+"      -l                              И�пи�ује називе функција.\n"
+"      -P                              И�пи�ује називе функција и �везе.\n"
+"      -p                              И�п�иује функције и �везе у облику "
+"који може бити поново\n"
+"                                      коришћен као улаз.\n"
+"      -S                              И�пи�ује низове та�тера који призивају "
+"макрое и њихове вредно�ти\n"
+"      -s                              И�пи�ује низове та�тера који призивају "
+"макрое и њихове вредно�ти\n"
+"                                      у облику који може бити поново "
+"коришћен као улаз.\n"
+"      -V                              И�пи�ује називе и вредно�ти "
+"променљивих\n"
+"      -v                              И�пи�ује називе и вредно�ти "
+"променљивих у облику који може бити\n"
+"                                      поново коришћен као улаз.\n"
+"      -q  назив-функције              Пропитује о томе који та�тери "
+"призивају именовану функцију.\n"
+"      -u  назив-функције              Развезује �ве та�тере који �у "
+"привезани за именовану функцију.\n"
+"      -r  низ та�тера                 Укалања �везу за �ИЗ_Т�СТЕР�.\n"
+"      -f  назив датотеке              Чита �везе та�тера из "
+"��ЗИВ�_Д�ТОТЕКЕ.\n"
+"      -x  низ_та�тера:наредба-шкољке  Доводи до извршавања ��РЕДБЕ-ШКОЉКЕ "
+"приликом уно�а\n"
+"    \t\t\t              �ИЗ�_Т�СТЕР�.\n"
+"      -X                              И�пи�ује �везе низова та�тера �а -x и "
+"придружене наредбе у облику\n"
+"                                      који може бити поново коришћен као "
+"улаз.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    „bind“ даје 0 о�им ако није дата непозната опција или ако не дође до "
+"грешке."
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Излазне петље „for“, „while“, или „until“.\n"
+"    \n"
+"    Излази из петље FOR, WHILE или UNTIL.  �ко је наведено N, �лама N "
+"затварајућих\n"
+"    петљи.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Излазно �тање је 0 о�им ако N није веће или једнако 1."
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"�а�тавља петље „for“, „while“, или „until“.\n"
+"    \n"
+"    �а�тавља �ледеће понављање затварајуће петље FOR, WHILE или UNTIL.\n"
+"    �ко је наведено N, на�тавља од N-те затварајуће петље.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Излазно �тање је 0 о�им ако N није веће или једнако 1."
+
+#: builtins.c:354
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Извршава уграђено�ти шкољке.\n"
+"    \n"
+"    Извршава УГР�ЂЕ�ОСТ-ШКОЉКЕ �а аргументима �РГ-и без обављања тражења\n"
+"    наредбе.  Ово је кори�но када желите поново да примените уграђено�т\n"
+"    шкољке као функцију шкољке, али морате да извршите уграђено�т у "
+"функцији.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје излазно �тање УГР�ЂЕ�ОСТИ-ШКОЉКЕ, или нетачно�т ако УГР�ЂЕ�ОСТ-"
+"ШКОЉКЕ\n"
+"    није уграђено�т шкољке."
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Даје �адржај текућег позива подрутине.\n"
+"    \n"
+"    Без ИЗР�З�, даје „$ред $назив_датотеке“.  Са ИЗР�ЗОМ, даје\n"
+"    „$ред $подрутина $назив_датотеке“; овај додатни податак може бити\n"
+"    коришћен за обезбеђивање праћења �премника.\n"
+"    \n"
+"    Вредно�т ИЗР�З� показује колико кадрова позива да �е иде уназад пре\n"
+"    текућег; први кадар је кадар 0.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје 0 о�им ако шкољка не извршава функцију шкољке или ИЗР�З\n"
+"    није и�праван."
+
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"Мења радни директоријум шкољке.\n"
+"    \n"
+"    Мења текући директоријум у ДИР.  О�новни ДИР је вредно�т променљиве\n"
+"    шкољке „ЛИЧ�О“.\n"
+"    \n"
+"    Променљива „ЦДПУТ�Њ�“ одређује путању претраге за директоријум који "
+"�адржи\n"
+"    ДИР.  Замен�ки називи директоријума у ЦДПУТ�ЊИ �у раздвојени двотачком "
+"(:).\n"
+"    �азив ништавног директоријума је и�ти као текући директоријум.  �ко ДИР "
+"почиње\n"
+"    ко�ом цртом (/), тада �е ЦДПУТ�Њ� не кори�ти.\n"
+"    \n"
+"    �ко �е не нађе директоријум, а опција шкољке „cdable_vars“ је подешена,\n"
+"    �матра �е да је реч назив променљиве.  �ко та променљива има вредно�т,\n"
+"    њена вредно�т �е кори�ти за ДИР.\n"
+"    \n"
+"    Опције:\n"
+"        -L\tприморава праћење �имболичких веза: решава �имболичке везе у\n"
+"                ДИР-у након обраде примерака „..“\n"
+"        -P\tкори�ти физичку �труктуру директоријума без праћења �имболичких\n"
+"                веза: решава �имболичке везе у ДИР-у пре обраде3 примерака "
+"„..“\n"
+"        -e\tако је до�тављена опција „-P“, а текући радни директоријум не\n"
+"                може бити у�пешно одређен, излази �а не-нултим �тањем\n"
+"        -@      на �и�темима који подржавају, пред�тавља датотеку �а "
+"проширеним\n"
+"                о�обинама као директоријум који �адржи о�обине датотеке\n"
+"    \n"
+"    О�новно је да прати �имболичке везе, као да је наведено „-L“.\n"
+"    „..“ �е обрађује уклањањем претходног �а�тојка назива путање назад на\n"
+"    ко�у цтрицу или на почетак ДИР-а.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје 0 ако је директоријум измењен, и ако је $PWD у�пешно подешено када "
+"је\n"
+"    коришћено „-P“; у �упротном вредно�т различиту од нуле."
+
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"И�пи�ује назив текућег радног директоријума.\n"
+"    \n"
+"    Опције:\n"
+"      -L\tи�пи�ује вредно�т наредбе $PWD ако именује текући радни\n"
+"                директоријум\n"
+"      -P\tи�пи�ује физички директоријум, без �имболичких веза\n"
+"    \n"
+"    По о�нови, „pwd“ �е понаша као да је наведено „-L“.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје 0 о�им ако није дата неи�правна опција или текући директоријум\n"
+"    не може бити прочитан."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"�иштавна наредба.\n"
+"    \n"
+"    �ема деј�тва; наредба не ради ништа.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Увек у�пешна."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Даје у�пешан резултат.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Увек у�пешно."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Даје неу�пешан резултат.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Увек неу�пешно."
+
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Извршава једно�тавну наредбу или приказује податке о наредбама.\n"
+"    \n"
+"    Покреће ��РЕДБУ �а �РГУМЕ�ТИМ� поти�кујући тражење функције шкољке, или\n"
+"    приказује податке о наведеним ��РЕДБ�М�.  Може да �е кори�ти за "
+"позивање\n"
+"    наредби на ди�ку када по�тоји функција �а и�тим називом.\n"
+"    \n"
+"    Опције:\n"
+"      -p    кори�ти о�новну вредно�т за ПУТ�ЊУ којом �е о�игурава налажење\n"
+"            �вих �тандардних помагала\n"
+"      -v    и�пи�ује опи� ��РЕДБЕ �лично уграђено�ти „type“\n"
+"      -V    и�пи�ује опширнији опи� �ваке ��РЕДБЕ\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје излазно �тање ��РЕДБЕ, или неу�пех ако �е ��РЕДБ� не пронађе."
+
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"Подешава вредно�ти и о�обине променљиве.\n"
+"    \n"
+"    Објављује променљиве и даје им о�обине.  �ко ни�у дати ��ЗИВИ,\n"
+"    приказује о�обине и вредно�ти �вих променљивих.\n"
+"    \n"
+"    Опције:\n"
+"      -f\tограничава радњу или приказ називима и одредницама функције\n"
+"      -F\tограничава приказ �амо називима функција (плу� број реда и\n"
+"                изворну датотеку приликом прочишћавања)\n"
+"      -g\t�твара опште променљиве када �е кори�ти у функцији шкољке;\n"
+"                у �упротном �е занемарује\n"
+"      -p\tприказује о�обине и вредно�т �ваког ��ЗИВ�\n"
+"    \n"
+"    Опције које подешавају о�обине:\n"
+"      -a\tда учини ��ЗИВЕ попи�аним низовима (ако је подржано)\n"
+"      -A\tда учини ��ЗИВЕ придруживим низовима (ако је подржано)\n"
+"      -i\tда учини да ��ЗИВИ имају о�обину „integer“ (целог броја)\n"
+"      -l\tда претвори ��ЗИВЕ у мала �лова при додели\n"
+"      -n\tчини ��ЗИВ упутом ка променљивој именованој �војом вредношћу\n"
+"      -r\tда учини ��ЗИВЕ �амо за читање\n"
+"      -t\tда учини да ��ЗИВИ имају о�обину „trace“ (прати)\n"
+"      -u\tда претвори ��ЗИВЕ у велика �лова при додели\n"
+"      -x\tда уради извоз ��ЗИВ�\n"
+"    \n"
+"    Употреба + уме�то - и�кључује дату о�обину.\n"
+"    \n"
+"    Променљиве �а о�обином целог броја имају аритметичку процену (видите\n"
+"    наредбу „let“) обављену када �е променљивој додели вредно�т.\n"
+"    \n"
+"    Када �е кори�ти у функцији, „declare“ чини ��ЗИВЕ ме�ним, као наредбом\n"
+"    „local“.  Опција „-g“ поти�кује ово понашање.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им ако �е не до�тави неи�правна опција или "
+"ако\n"
+"    не дође до грешке доделе променљиве."
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"Подешава вредно�ти и атрибуте променљиве.\n"
+"    \n"
+"    Синоним за „declare“.  Погледајте „help declare“."
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Одређује ме�не променљиве.\n"
+"    \n"
+"    Ствара ме�ну променљиву звану ��ЗИВ, и даје јој ВРЕД�ОСТ.  ОПЦИЈ� може\n"
+"    бити �вака опција коју прихвати „declare“.\n"
+"    \n"
+"    Ме�не променљиве могу бити коришћене једино у функцији; виде их једино\n"
+"    функције у којима �у одређене и уњиховим породима.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Резултат је позитиван о�им ако �е не до�тави неи�правна опција, ако не "
+"дође\n"
+"    до грешке додељивања променљиве, или ако шкољка не извршава функцију."
+
+#: builtins.c:557
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Пише аргументе на �тандардни излаз.\n"
+"    \n"
+"    Приказује �РГ-те, раздвојене једним знаком размака и праћене\n"
+"    новим редом, на �тандардном излазу.\n"
+"    \n"
+"    Опције:\n"
+"      -n\tне прикачиње нови ред\n"
+"      -e\tукључује тумачење пратећих контра ко�их црта новог реда\n"
+"      -E\tизричито поти�кује тумачење контра ко�их црта новог реда\n"
+"    \n"
+"    „echo“ тумачи пратеће знаке контра ко�е црте новог реда:\n"
+"      \\a\tупозорење (звонце)\n"
+"      \\b\tповратница\n"
+"      \\c\tпоти�кује будући излаз\n"
+"      \\e\tзнак новог реда\n"
+"      \\E\tзнак новог реда\n"
+"      \\f\tдовод обра�ца\n"
+"      \\n\tнови ред\n"
+"      \\r\tповратак но�ача\n"
+"      \\t\tводоравни табулатор\n"
+"      \\v\tу�правни табулатор\n"
+"      \\\\\tконтра ко�а црта\n"
+"      \\0nnn\tзнак чији �СКРИ код је�те „NNN“ (октално).  „NNN“ може бити "
+"од\n"
+"    \t        0 до 3 окталне цифре\n"
+"      \\xHH\tо�мобитни знак чија вредно�т је�те „HH“ (хек�адецимално).  "
+"„HH“\n"
+"                може бити једна или две хек�адецималне цифре\n"
+"      \\uHHHH\tзнак Јуникода чија вредно�т је�те хек�адецимална вредно�т "
+"„HHHH“.\n"
+"    \t\t„HHHH“ може имати једну до четири хек�адецималне цифре.\n"
+"      \\UHHHHHHHH знак Јуникода чија вредно�т је�те хек�адецимална вредно�т\n"
+"    \t\t„HHHHHHHH“. „HHHHHHHH“ може бити једна од о�ам хек�адецималних "
+"цифара.\n"
+"        \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им ако не дође до грешке пи�ања."
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Запи�ује аргументе на �тандардни излаз.\n"
+"    \n"
+"    Приказује �РГ-те на �тандардном излазу за којима �леди нови ред.\n"
+"    \n"
+"    Опције:\n"
+"      -n\tне придодаје нови ред\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им ако не дође до грешке пи�ања."
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"Укључује и и�кључује уграђено�ти шкољке.\n"
+"    \n"
+"    Укључује и и�кључује уграђене наредбе шкољке.  И�кључивање вам "
+"омогућава\n"
+"    да извршите наредбу ди�ка која но�и и�ти назив као уграђено�т шкољке\n"
+"    без коришћења пуне путање.\n"
+"    \n"
+"    Опције:\n"
+"      -a\tи�пи�ује �пи�ак уграђено�ти приказујући да ли је �вака укључена\n"
+"      -n\tи�кључује �ваки ��ЗИВ или приказује �пи�ак и�кључених уграђено�ти\n"
+"      -p\tи�пи�ује �пи�ак уграђено�ти у поново кори�тивом облику\n"
+"      -s\tи�пи�ује �амо називе По�ик�ових „по�ебних“ уграђено�ти\n"
+"    \n"
+"    Опције које управљају динамичним учитавањем:\n"
+"      -f\tУчитава уграђено�т ��ЗИВ� из дељеног објекта ��ЗИВ_Д�ТОТЕКЕ\n"
+"      -d\tУклања уграђено�т учитану помоћу „-f“\n"
+"    \n"
+"    Без опција, �ваки ��ЗИВ је укључен.\n"
+"    \n"
+"    Да кори�тите „test“ пронађен у $ПУТ�ЊИ уме�то издања уграђено�ти\n"
+"    шкољке, укуцајте „enable -n test“.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им ако ��ЗИВ није уграђено�т шкољке или ако не "
+"дође до грешке."
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Извршава аргументе као наредбе шкољке.\n"
+"    \n"
+"    Обједињује �РГ-те у једну ни�ку, кори�ти резултат као улаз шкољке,\n"
+"    и извршава резултирајуће наредбе.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје излазно �тање наредбе или у�пех ако је наредба ништавна."
+
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"Обрађује аргументе опције.\n"
+"    \n"
+"    „Getopts“ �е кори�ти по�тупцима шкољке за обраду положајних параметара\n"
+"    као опција.\n"
+"    \n"
+"    „OPTSTRING“ �даржи �лова опције зарад препознавања; ако након �лова\n"
+"    долази двотачка, очекује �е да опција има аргумент, који од њега треба\n"
+"    да буде раздвојен празнином.\n"
+"    \n"
+"    �акон �ваког призивања, „добави_опцију“ ће по�тавити �ледећу опцију у\n"
+"    $називу променљиве шкољке, покрећући назив ако не по�тоји, и индек�\n"
+"    �ледећег аргумента зарад обраде у променљиве шкољке ОПЦИ�Д. ОПЦИ�Д\n"
+"    �е покреће на 1 �ваки пут када �е призове шкољка или �пи� шкољке.\n"
+"    Када опција захтева аргумент, „добави_опцију“ по�тавља тај аргумент\n"
+"    у променљиву шкољке ОПЦ�РГ.\n"
+"    \n"
+"    „добави_опцију“ извештава о грешкама на један од два начина.  �ко је\n"
+"    први знак ОПЦ�ИСКЕ двотачка, „добави_опцију кори�ти нечујно извештавање\n"
+"    о грешци.  У овом режиму, поруке о грешкама �е не и�пи�ују.  �ко је\n"
+"    виђена неи�правна опција, по�тавља знак опцијепронађен у ОПЦ�РГ-у.  �ко\n"
+"    захтевани аргумент није нађен, по�тавља двотачку „:“ у ��ЗИВ и подешава\n"
+"    ОПЦ�РГ на нађени знак опције.  �ко „добави_опцију“ није у нечујном "
+"режиму,\n"
+"    а виђена је неи�правна опција, онда по�тавља знак питања „?“ у ��ЗИВ и\n"
+"    ра�подешава ОПЦ�РГ.  �ко није пронађен захтевани аргумент, питање „?“ "
+"�е\n"
+"    по�тавља у ��ЗИВУ, ОПЦ�РГ �е ра�подешава, а и�пи�ује �е порука о "
+"дијагнози.\n"
+"    \n"
+"    �ко променљива шкољке ОПЦГРЕШК� има вредно�т 0, „добави_опцију“ "
+"и�кључује\n"
+"    и�пи�ивање порука о грешкама, чак и ако први знак ОПЦ�ИСКЕ није "
+"двотачка.\n"
+"    ОПЦГРЕШК� има вредно�т 1 по о�нови.\n"
+"    \n"
+"    „Добави_опцију“ обично обрађује положајне параметре ($0 - $9), али ако "
+"је\n"
+"    дато више аргумената, онда �е они обрађују.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат ако је пронађена опција; неу�пех ако �е наиђе "
+"на\n"
+"    крај опције или ако не дође до грешке."
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"Замењује шкољку датом наредбом.\n"
+"    \n"
+"    Извршава ��РЕДБУ, замењујући ову шкољку наведеним програмом. �РГУМЕ�ТИ\n"
+"    по�тају аргументи ��РЕДБЕ.  �ко није наведена ��РЕДБ�, �вако "
+"преу�меравање\n"
+"    има деј�тва у текућој шкољци.\n"
+"    \n"
+"    Опције:\n"
+"      -a назив          про�леђује ��ЗИВ као нулти аргумент ��РЕДБЕ\n"
+"      -c\t\tизвршава ��РЕДБУ �а празним окружењем\n"
+"      -l\t\tпо�тавља цртицу у нултом аргументу ��РЕДБЕ\n"
+"    \n"
+"    �ко наредба не може бити извршена, по�тоји не-међудеј�твена шкољка, "
+"о�им\n"
+"    ако није подешена опција шкољке „execfail“.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им ако ��РЕДБ� није нађена или ако не дође до "
+"грешке преу�меравања."
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"�апушта шкољку.\n"
+"    \n"
+"    �апушта шкољку �а �тањем N.  �ко је N изо�тављено, излазно �тање\n"
+"    је оно по�ледње извршене наредбе."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"�апушта шкољку пријављивања.\n"
+"    \n"
+"    �апушта шкољку пријављивања �а излазним �тањем N.  Даје грешку ако није "
+"извршено\n"
+"    у шкољци пријављивања."
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"Приказује или извршава наредбе �а �пи�ка и�торијата.\n"
+"    \n"
+"    „fc“ �е кори�ти за и�пи�ивање или уређивање и за поновно извршавање "
+"наредби\n"
+"    �а �пи�ка и�торијата. ПРВИ и ПОСЛЕДЊИ могу бити бројеви који наводе "
+"оп�ег,\n"
+"    или ПРВИ може бити ни�ка, што значи да нај�вежија наредба почиње том "
+"ни�ком.\n"
+"    \n"
+"    Опције:\n"
+"      -e Е��ЗИВ\t  бира уређивача за коришћење. О�новно је „FCEDIT“, затим "
+"„EDITOR“,\n"
+"    \t\t  затим „vi“\n"
+"      -l \t  прави �пи�ак редова уме�то да уређује\n"
+"      -n\t  изо�тавља бројеве редова приликом �тварања �пи�ка\n"
+"      -r\t  преокреће редо�лед редова (новије по�тавља као прве)\n"
+"    \n"
+"    Са запи�ом „fc -s [пат=реп ...] [наредба]“, ��РЕДБ� �е поново\n"
+"    извршава након обављене замене СТ�РО=�ОВО.\n"
+"    \n"
+"    Кори�тан п�еудоним за коришћење � овим је „r='fc -s'“, тако да „r cc“\n"
+"    покреће по�ледњу наредбу која почиње �а „cc“ а „r“ поново извршава\n"
+"    по�ледњу наредбу.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат или �тање извршене наредбе; не-нулу ако дође до "
+"грешке."
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Премешта по�ао у први план.\n"
+"    \n"
+"    По�тавља по�ао одређен �а „JOB_SPEC“ у први план, учинивши га текућим\n"
+"    по�лом.  �ко „JOB_SPEC“ није при�утно, кори�ти �е шкољкино поимање\n"
+"    текућег по�ла.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Стање наредбе по�тављене у први план, или неу�пех ако дође до грешке."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Премешта по�ао у позадину.\n"
+"    \n"
+"    По�тавља по�ао одређен �ваком „JOB_SPEC“ у позадину, као да �у "
+"покренути\n"
+"    �а &.  �ко „JOB_SPEC“ није при�утно, кори�ти �е шкољкино поимање\n"
+"    текућег по�ла.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им ако није укључено управљање по�лом или ако "
+"не дође до грешке."
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"Памти или приказује ме�та програма.\n"
+"    \n"
+"    Одређује и памти пуну путању �ваког ��ЗИВ� наредбе.  �ко ни�у\n"
+"    дати аргументи, приказује �е податак о упамћеним наредбама.\n"
+"    \n"
+"    Опције:\n"
+"      -d\tзаборавља запамћено ме�то �ваког ��ЗИВ�\n"
+"      -l\tприказује у облику који може бити поново коришћен као улаз\n"
+"      -p путања кори�ти ПУТ�ЊУ као пуну путању ��ЗИВ�\n"
+"      -r\tзаборавља �ва запамћена ме�та\n"
+"      -t\tи�пи�ује запамћено ме�то �ваког ��ЗИВ�, по�тављајући\n"
+"    \t\tодговарајући ��ЗИВ и�пред �ваког ме�та ако је дато\n"
+"    \t\tвише ��ЗИВ�\n"
+"    �ргументи:\n"
+"      ��ЗИВ\tСваки ��ЗИВ �е тражи у $ПУТ�ЊИ и додаје на �пи�ак\n"
+"    \t\tзапамћених наредби.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им ако �е ��ЗИВ не нађе или ако је дата "
+"неи�правна опција."
+
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Приказује податке о уграђеним наредбама.\n"
+"    \n"
+"    Приказује кратке �ажетке уграђених наредби.  �ко је наведен\n"
+"    Ш�БЛО�, даје опширну помоћ �вих наредби које одговарају Ш�БЛО�У,\n"
+"    у �упротном и�пи�ује �е �пи�ак тема помоћи.\n"
+"    \n"
+"    Опције:\n"
+"      -d\tи�пи�ује кратак опи� за �ваку тему\n"
+"      -m\tприказује коришћење у запи�у квази �транице упут�тва\n"
+"      -s\tи�пи�ује �амо кртак �иже употребе за �ваку тему која\n"
+"    \t        одговара Ш�БЛО�У\n"
+"    \n"
+"    �ргументи:\n"
+"      Ш�БЛО�\tШаблон који наводи тему помоћи\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им ако Ш�БЛО� није пронађен или ако је дата "
+"неи�правна опција."
+
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Приказује или управља �пи�ком и�торијата.\n"
+"    \n"
+"    Приказује �пи�ак и�торијата �а бројевима редова, по�тављајући ипред\n"
+"    �ваког измењеног уно�а *.  �ргумент N и�пи�ује �амо по�ледња N уно�а.\n"
+"    \n"
+"    Опције:\n"
+"      -c\t   чи�ти �пи�ак и�торијата бришући �ве уно�е\n"
+"      -d померај   брише уно� и�торијата на померају ПОМЕР�Ј.\n"
+"    \n"
+"      -a\t   додаје редове и�торијата из ове �е�ије у датотеку и�торијата\n"
+"      -n\t   чита �ве редове и�торијата који ни�у прочитани из датотеке "
+"и�торијата\n"
+"    \t\tи додаје их на �пи�ак и�торијата\n"
+"      -r\t   чита датотеку и�торијата и додаје �адржај на �пи�ак и�торијата\n"
+"      -w\t   пише текући и�торијат у датотеку и�торијата\n"
+"    \n"
+"      -p\t   обавља ширење и�торијата на �ваком �РГ-у и приказује резултат\n"
+"    \t           без �мештања на �пи�ак и�торијата\n"
+"      -s\t   додаје �РГ-те на �пи�ак и�торијата као један уно�\n"
+"    \n"
+"    �ко је дата Д�ТОТЕК�, кори�ти �е као датотека и�торијата. У �упротном,\n"
+"    ако Д�ТОТЕК�_ИСТОРИЈ�Т� има вредно�т, она �е кори�ти, другачије „~/."
+"bash_history“.\n"
+"    \n"
+"    �ко је променљива З�ПИСВРЕМЕ��ИСТОРИЈ�Т� подешена и није ништавна, "
+"кори�ти �е\n"
+"    њена вредно�т као ни�ка запи�а за „strftime(3)“ да и�пи�ше времен�ку "
+"ознаку придружену\n"
+"    �ваком приказаном уно�у и�торијата.  У �упротном времен�ке ознаке �е не "
+"и�пи�ују.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им ако није дата неи�правна опција или ако не "
+"дође до грешке."
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"Приказује �тање по�ла.\n"
+"    \n"
+"    И�пи�ује радне по�лове.  ОДРЕДБ�ПОСЛ� ограничава излаз на тај по�ао.\n"
+"    Без опција, �тање �вих радних по�лова је приказано.\n"
+"    \n"
+"    Опције:\n"
+"      -l\tи�пи�ује ИБ-ове проце�а као додатак обичним подацима\n"
+"      -n\tи�пи�ује �амо проце�е који �у променили �тање од по�ледњег\n"
+"    \t        обавештавања\n"
+"      -p\tи�пи�ује �амо ИБ-ове проце�а\n"
+"      -r\tограничава излаз на покренуте по�лове\n"
+"      -s\tограничава излаз на зау�тављене по�лове\n"
+"    \n"
+"    �ко је до�тављено „-x“, ��РЕДБ� �е покреће након што �е �ве одредбе "
+"по�ла које\n"
+"    �е јављају у �РГУМЕ�ТИМ� замене ИБ-ом проце�а тог вође групе проце�а "
+"по�ла.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им ако није дата неи�правна опција или ако не "
+"дође до грешке.\n"
+"    �ко �е кори�ти „-x“, даје излазно �тање ��РЕДБЕ."
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"Уклања по�лове из текуће шкољке.\n"
+"    \n"
+"    Уклања �ваки аргумент ОДРЕДБЕПОСЛ� из табеле радних по�лова.  Без\n"
+"    ОДРЕДБИПОСЛ�, шкољка кори�ти �воје тумачење текућег по�ла.\n"
+"    \n"
+"    Опције:\n"
+"      -a\tуклања �ве по�лове ако није до�тављена ОДРЕДБ�ПОСЛ�\n"
+"      -h\tозначава �ваку ОДРЕДБУПОСЛ� тако да СИГ��ЛГОРЕ није по�лат по�лу "
+"ако\n"
+"    \t        шкољка прими СИГ��ЛГОРЕ\n"
+"      -r\tуклања �амо покренуте по�лове\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им ако није дата неи�правна опција или "
+"ОДРЕДБ�ПОСЛ�."
+
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Шаље �игнал по�лу.\n"
+"    \n"
+"    Шаље проце�има препознатих ПИБ-ом или ОДРЕДБОМПОСЛ� �игнал именован\n"
+"    ОДРЕДБОМСИГ��Л� или БРОЈЕМСИГ��Л�.  �ко није при�утно ни "
+"ОДРЕДБ�_СИГ��Л�\n"
+"    ни БРОЈ_СИГ��Л�, подразумева �е ТЕРМ_СИГ��Л�.\n"
+"    \n"
+"    Опције:\n"
+"      -s �иг\tСИГ је назив �игнала\n"
+"      -n �иг\tСИГ је број �игнала\n"
+"      -l\tи�пи�ује називе �игнала; ако аргументи прате „-l“ подразумева\n"
+"    \t        �е да �у бројеви �игнала за које називи требају бити и�пи�ани\n"
+"      -L\t�иноним за „-l“\n"
+"    \n"
+"    „Kill“ је уграђено�т шкољке из два разлога: омогућава да ИБ-ови по�лова "
+"буду\n"
+"    коришћени уме�то ИБ-ова проце�а, и омогућава убијање проце�а ако је "
+"до�тигнуто\n"
+"    ограничење проце�а које можете да направите.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им ако није дата неи�правна опција или ако не "
+"дође до грешке."
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"Процењује аритметичке изразе.\n"
+"    \n"
+"    Процењује �ваки �РГ као аритметички израз.  Процењивање �е ради у\n"
+"    целим бројевима �талне ширине без провере за прекорачењем, тако да �е\n"
+"    дељење нулом хвата и означава као грешка.  Следећи �пи�ак оператора је\n"
+"    групи�ан у нивое оператора једнаког првен�тва.  �ивои �у и�пи�ани према\n"
+"    поретку ра�тућег првен�тва.\n"
+"    \n"
+"    \tid++, id--\tпроменљива по�т-увећања, по�т-умањења\n"
+"    \t++id, --id\tпроменљива пре-увећања, пре-умањења\n"
+"    \t-, +\t\tједночлани мину�, плу�\n"
+"    \t!, ~\t\tлогичка и бит�ка негација\n"
+"    \t**\t\t�тепеновање\n"
+"    \t*, /, %\t\tмножење, дељење, о�татак\n"
+"    \t+, -\t\t�абирање, одузимање\n"
+"    \t<<, >>\t\tлеви и де�ни бит�ки помаци\n"
+"    \t<=, >=, <, >\tпоређење\n"
+"    \t==, !=\t\tједнако�т, неједнако�т\n"
+"    \t&\t\tбит�ко И\n"
+"    \t^\t\tбит�ко ИСКЉУЧИВО ИЛИ\n"
+"    \t|\t\tбит�ко ИЛИ\n"
+"    \t&&\t\tлогичко И\n"
+"    \t||\t\tлогичко ИЛИ\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tу�ловни оператор\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tдодела\n"
+"    \n"
+"    Променљиве шкољке �у дозвољене као операнди.  �азив променљиве\n"
+"    �е замењује њеном вредношћу (при�иљеном на цео број �талне ширине)\n"
+"    у изразу.  Променљива не мора да има укључен атрибут целог броја\n"
+"    да би била коришћена у изразу.\n"
+"    \n"
+"    Оператори �е процењују према првен�тву.  Под-изрази у заградама\n"
+"    �е први процењују и могу да препишу горња правила првен�тва.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    �ко �е по�ледњи �РГ процени на 0, и�пи�ује 1; у �упротном даје 0."
+
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"Чита ред �а �тандардног улаза и дели га на поља.\n"
+"    \n"
+"    Чита један ред �а �тандардног улаза, или из опи�ника датотеке ФД\n"
+"    ако је до�тављена опција „-u“.  Ред је подељен на поља као при дељењу\n"
+"    речи, а прва реч �е додељује првом ��ЗИВУ, друга реч другом ��ЗИВУ,\n"
+"    и тако редом, �а �ваком наредном речју додељеном по�ледњем ��ЗИВУ.\n"
+"    Само знаци пронађени у „$IFS“ �е признају за граничнике речи.\n"
+"    \n"
+"    �ко ни�у до�тављени ��ЗИВИ, читани ред је �мештен у променљивој "
+"ОДГОВОР.\n"
+"    \n"
+"    Опције:\n"
+"      -a низ\t  додељује читање речи �еквенцијалним индек�има променљиве\n"
+"    \t\t  низа �ИЗ, почевши од нуле\n"
+"      -d гран\t  на�тавља �ве док �е не прочита први знак ГР��ИЧ�ИК�,\n"
+"    \t\t  радије него нови ред\n"
+"      -e\t  кори�ти читање реда да добије ред у међудеј�твеној шкољци\n"
+"      -i тек�т\t  кори�ти ТЕКСТ као почетни тек�т за читање реда\n"
+"      -n n-знака  даје резултат након читања знакова N-З��КОВ� радије него "
+"да\n"
+"    \t\t  чека на нови ред, али поштује граничника ако је прочитано\n"
+"    \t\t  мање знакова од N-З��КОВ� пре граничника\n"
+"      -N n-знака  даје резултат �амо након читања тачно знакова N-З��КОВ�, "
+"о�им\n"
+"    \t\t  ако не наиђе на крај датотеке или ако не и�текне време читања,\n"
+"                  занемарујући �ве граничнике\n"
+"      -p упит\t  и�пи�ује ни�ку УПИТ без пратећег новог реда пре покушаја "
+"читања\n"
+"      -r\t  не дозвољава контра ко�им цртама да преломе ниједан од знакова\n"
+"      -s\t  не оглашава улаз који долази �а терминала\n"
+"      -t и�тек\t  неу�пех времен�ког рока и давања резултата ако читав ред "
+"улаза\n"
+"    \t\t  није прочитан за време од ВРЕМЕ_РОК �екунде.  Вредно�т променљиве\n"
+"    \t\t  ВИСТЕК� је о�новни времен�ки рок. ВРЕМЕ�СКИ_РОК може бити "
+"разломак.\n"
+"    \t\t  �ко је ВРЕМЕ�СКИ_РОК 0, читање даје резултат одмах, без покушаја\n"
+"    \t\t  читања некох података, дајући позитиван резултат �амо ако је улаз\n"
+"    \t\t  до�тупан на наведеном опи�нику датотеке.  Излазно �тање је веће\n"
+"    \t\t  од 128 ако је времен�ки рок прекорачен\n"
+"      -u фд\t  чита из опи�ника датотеке ФД уме�то �а �тандардног улаза\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Резултат је нула, о�им ако �е не наиђе на крај датотеке, не и�текне "
+"време\n"
+"    читања (у том �лучају је већи од 128), ако не дође до грешке доделе "
+"променљиве,\n"
+"    или ако �е не до�тави неи�праван опи�ник датотеке као аргумент опције „-"
+"u“."
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"Враћа из функције шкољке.\n"
+"    \n"
+"    Доводи до тога да функција или изворни �пи� изађу �а вредношћу\n"
+"    коју наводи N.  �ко је N изо�тављено, �тање резултата је оно\n"
+"    по�ледње извршене наредбе унутар функције или �пи�а.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје N, или неу�пех ако шкољка не извршава функцију или �пи�."
+
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"Подешава или ра�подешава вредно�ти опција шкољке и положајних параметара.\n"
+"    \n"
+"    Мења вредно�т о�обина шкољке и положајних параметара, или\n"
+"    приказује називе и вредно�ти променљивих шкољке.\n"
+"    \n"
+"    Опције:\n"
+"      -a  Означава променљиве које �у измењене или направљене за извоз.\n"
+"      -b  Одмах обавештава о окнчавању по�ла.\n"
+"      -e  Одмах излази ако наредба по�тоји �а не-нултим �тањем.\n"
+"      -f  И�кључује �тварање назива датотеке (уопштавање).\n"
+"      -h  Памти ме�то наредби као што �у тражене.\n"
+"      -k  Сви аргументи додељивања �е по�тављају у окружењу за\n"
+"          наредбу, не �амо они који претходе називу наредбе.\n"
+"      -m  Управљање по�лом је укључено.\n"
+"      -n  Чита наредбе али их не извршава.\n"
+"      -o назив-опције\n"
+"          Подешава променљиву према називу-опције:\n"
+"              allexport    и�то као -a\n"
+"              braceexpand  и�то као -B\n"
+"              emacs        кори�ти �учеље уређивања реда у �тилу емак�а\n"
+"              errexit      и�то као -e\n"
+"              errtrace     и�то као -E\n"
+"              functrace    и�то као -T\n"
+"              hashall      и�то као -h\n"
+"              histexpand   и�то као -H\n"
+"              history      укључује и�торијат наредбе\n"
+"              ignoreeof    шкољка неће изаћи док читање међудеј�твених\n"
+"                           напомена краја датотеке допушта напоменама\n"
+"                           да �е појављују у међудеј�твеним наредбама\n"
+"              keyword      и�то као -k\n"
+"              monitor      и�то као -m\n"
+"              noclobber    и�то као -C\n"
+"              noexec       и�то као -n\n"
+"              noglob       и�то као -f\n"
+"              nolog        тренутно прихваћено али занемарено\n"
+"              notify       и�то као -b\n"
+"              nounset      и�то као -u\n"
+"              onecmd       и�то као -t\n"
+"              physical     и�то као -P\n"
+"              pipefail     вредно�т резултата �појнице је�те �тање по�ледње "
+"наредбе\n"
+"                           за прекид �а не-нултим �тањем, или �а нулом ако "
+"ниједна\n"
+"                           наредба није завршила �а не-нултим �тањем\n"
+"              posix        мења понашање баша где �е о�новна радња "
+"разликује\n"
+"                           од �тандарда По�ик�а да би одговарала �тандарду\n"
+"              privileged   и�то као -p\n"
+"              verbose      и�то као -v\n"
+"              vi           кори�ти �учеље уређивања реда у �тилу вија\n"
+"              xtrace       и�то као -x\n"
+"      -p  Укључено кад год �е ибови �тварног и ефективног кори�ника не "
+"подударају.\n"
+"          И�кључује обраду датотеке „$ENV“ и увоз функција шкољке.  "
+"И�кључивање ове\n"
+"          опције доводи до тога да ефективни јиб и гиб буду подешени на "
+"�тварни\n"
+"          јиб и гиб.\n"
+"      -t  Излази након читања и извршавања једне наредбе.\n"
+"      -u  Сматра променљиве ра�подешавања за грешку приликом замењивања.\n"
+"      -v  И�пи�ује редове улаза шкољке како бивају читани.\n"
+"      -x  И�пи�ује наредбе и њихове аргументе како бивају извршени.\n"
+"      -B  шкољка ће обавити ширење заграде\n"
+"      -C  �ко је подешено, онемогућава препи�ивање по�тојећих редовних\n"
+"          датотека преу�меравањем излаза.\n"
+"      -E  �ко је подешено, хватање ГРЕШКЕ �е на�леђује функцијама шкољке.\n"
+"      -H  Укључује замену и�торијата у �тилу !.  Ова опција је укључена\n"
+"          по о�нови када је шкољка међудеј�твена.\n"
+"      -P  �ко је подешено, не решава �имболичке везе приликом извршавања\n"
+"          наредби као што је „cd“ која мења текући директоријум.\n"
+"      -T  �ко је подешено, хватања ПРОЧИШЋ�В�Њ� и РЕЗУЛТ�Т� �е на�леђују "
+"функцијама шкољке.\n"
+"      --  Додељује �ве прео�тале аргументе положајним параметрима.\n"
+"          �ко нема прео�талих аргумената, положајни параметри �е\n"
+"          ра�подешавају.\n"
+"      -   Додељује �ве прео�тале аргументе положајним параметрима.\n"
+"          Опције „-x“ и „-v“ �у и�кључене.\n"
+"    \n"
+"    Коришћење + радије него - доводи до и�кључивања ових опција.  Опције\n"
+"    могу такође бити коришћене над призивањем шкољке.  Текући �куп опција\n"
+"    може бити пронађен у $-.  Прео�талих n �РГ-та је�у положајни параметри\n"
+"    и додељени �у, по реду, $1, $2, .. $n.  �ко ни�у дати �РГументи, �ве\n"
+"    променљиве шкољке �е и�пи�ују.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им ако није дата неи�правна опција."
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"Ра�подешава вредно�ти и о�обине променљивих и функција шкољке.\n"
+"    \n"
+"    За �ваки ��ЗИВ, уклања одговарајућу променљиву или функцију.\n"
+"    \n"
+"    Опције:\n"
+"      -f\t�матра �ваки ��ЗИВ као функцију шкољке\n"
+"      -v\t�матра �ваки ��ЗИВ као променљиву шкољке\n"
+"      -n\t�матра �ваки ��ЗИВ као упуту назива и ра�подешава\n"
+"    \t        �аму променљиву радије него упуте променљиве\n"
+"    \n"
+"    Без опција,  „unset“ прво покушава да ра�поде�и променљиву, а ако то не "
+"у�пе,\n"
+"    покушава да ра�поде�и функцију.\n"
+"    \n"
+"    �еке променљиве не могу бити ра�подешене; видите такође „readonly“.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им ако није дата неи�правна опција или ако је "
+"��ЗИВ �амо за читање."
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Подешава о�обину извоза за променљиве шкољке.\n"
+"    \n"
+"    Означава �ваки ��ЗИВ за �амо�талан извоз у окружење накнадно извршених\n"
+"    наредби.  �ко је до�тављена ВРЕД�ОСТ, додељује ВРЕД�ОСТ пре извоза.\n"
+"    \n"
+"    Опције:\n"
+"      -f\tупућује на функције шкољке\n"
+"      -n\tуклања �вој�тво извоза из �ваког ��ЗИВ�\n"
+"      -p\tприказује �пи�ак �вих извезених променљивих и функција\n"
+"    \n"
+"    �ргумент „--“ и�кључује даљу обраду опције.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им ако је дата неи�правна опција или је ��ЗИВ "
+"неи�праван."
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Означава променљиве шкољке непроменљивим.\n"
+"    \n"
+"    Означава �ваки ��ЗИВ као �амо за читање; вредно�ти тих ��ЗИВ� не могу "
+"бити\n"
+"    измењене под�еквенционалним додељивањем.  �ко је до�тављена ВРЕД�ОСТ, "
+"додељује\n"
+"    ВРЕД�ОСТ пре него ли јеозначи �амо за читање.\n"
+"    \n"
+"    Опције:\n"
+"      -a\tупућује на променљиве попи�ивог низа\n"
+"      -A\tупућује на променљиве придруживог низа\n"
+"      -f\tупућује на функције шкољке\n"
+"      -p\tприказује �пи�ак �вих променљивих и функција �амо за читање, "
+"зави�но\n"
+"                од тога да ли је опција „-f“ дата или није\n"
+"    \n"
+"    �ргумент  „--“ и�кључује даље обрађивање опције.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им ако није дата неи�правна опција или ако је "
+"��ЗИВ неи�праван."
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"Помера параметре положаја.\n"
+"    \n"
+"    Преименује параметре положаја $N+1,$N+2 ... у $1,$2 ...  �ко N није\n"
+"    дато, подразумева �е да је 1.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Резултати �у у�пешни о�им ако N није негативно иливеће од $#."
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Извршава наредбе из датотеке у текућој шкољци.\n"
+"    \n"
+"    Чита и извршава наредбе из Д�ТОТЕКЕ у текућој шкољци.  Уно�и у\n"
+"    $ПУТ�ЊИ �е кори�те за налажење директоријума који �адржи Д�ТОТЕКУ.\n"
+"    �ко је до�тављен неки од �РГУМЕ�Т�Т�, по�тају параметри положаја\n"
+"    приликом извршавања Д�ТОТЕКЕ.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје �тање по�ледње извршене наредбе у Д�ТОТЕЦИ; не у�пева\n"
+"    ако назив Д�ТОТЕКЕ не може бити прочитан."
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Обу�тавља извршавање шкољке.\n"
+"    \n"
+"    Обу�тавља извршавање ове шкољке �ве док не прими �игнал БРОЈ_СИГ��Л�.\n"
+"    О�им ако ни�у при�иљене, шкољке пријављивања не могу бити обу�тављене.\n"
+"    \n"
+"    Опције:\n"
+"      -f\tприморава обу�тављање, чак и ако је шкољка пријављивања\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им ако није укључено управљање по�лом или ако "
+"не дође до грешке."
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"Процењује у�ловни израз.\n"
+"    \n"
+"    Излази �а �тањем 0 (тачно) или 1 (нетачно) у зави�но�ти од\n"
+"    процене ИЗР�З�.  Изрази могу бити једночлани или двочлани.  Једночлани\n"
+"    изрази �е че�то кори�те за и�питивање �тања датотеке.  Ту �у такође и\n"
+"    оператори ни�ке и оператори поређења бројева.\n"
+"    \n"
+"    Понашање пробе зави�и од броја аргумената.  Прочитајте\n"
+"    �траницу упут�тва баша потпуну одредбу.\n"
+"    \n"
+"    Оператори датотеке:\n"
+"    \n"
+"      -a Д�ТОТЕК�        Тачно ако датотека по�тоји.\n"
+"      -b Д�ТОТЕК�        Тачно ако је датотека по�ебног блока.\n"
+"      -c Д�ТОТЕК�        Тачно ако је датотека по�ебног знака.\n"
+"      -d Д�ТОТЕК�        Тачно ако је датотека директоријум.\n"
+"      -e Д�ТОТЕК�        Тачно ако датотека по�тоји.\n"
+"      -f Д�ТОТЕК�        Тачно ако датотека по�тоји и ако је обична "
+"датотека.\n"
+"      -g Д�ТОТЕК�        Тачно ако је датотека поде�и-иб-групе.\n"
+"      -h Д�ТОТЕК�        Тачно ако је датотека �имболичка веза.\n"
+"      -L Д�ТОТЕК�        Тачно ако је датотека �имболичка веза.\n"
+"      -k Д�ТОТЕК�        Тачно ако датотека има �вој „лепљиви“ �куп бита.\n"
+"      -p Д�ТОТЕК�        Тачно ако је датотека именована �појка.\n"
+"      -r Д�ТОТЕК�        Тачно ако датотеку �амо ви можете да читате.\n"
+"      -s Д�ТОТЕК�        Тачно ако датотека по�тоји и није празна.\n"
+"      -S Д�ТОТЕК�        Тачно ако је датотека прикључница.\n"
+"      -t ФД              Тачно ако је ФД отворен на терминалу.\n"
+"      -u Д�ТОТЕК�        Тачно ако је датотека поде�и-иб-кори�ника.\n"
+"      -w Д�ТОТЕК�        Тачно ако у датотеку можете ви да пишете.\n"
+"      -x Д�ТОТЕК�        Тачно ако датотеку можете ви да извршите.\n"
+"      -O Д�ТОТЕК�        Тачно ако је датотека заправо у вашем вла�ништву.\n"
+"      -G Д�ТОТЕК�        Тачно ако је датотека заправо у вла�ништву ваше "
+"групе.\n"
+"      -N Д�ТОТЕК�        Тачно ако је датотека измењена након по�ледњег "
+"читања.\n"
+"    \n"
+"      Д�ТОТЕК�1 -nt Д�ТОТЕК�2  Тачно ако је датотека1 новија од датотеке2 "
+"(према датуму измене).\n"
+"    \n"
+"      Д�ТОТЕК�1 -ot Д�ТОТЕК�2  Тачно ако је датотека1 �тарија од датотеке2.\n"
+"    \n"
+"      Д�ТОТЕК�1 -ef Д�ТОТЕК�2  Тачно ако је датотека1 чвр�та веза до "
+"датотеке2.\n"
+"    \n"
+"    Оператори ни�ке:\n"
+"    \n"
+"      -z �ИСК�            Тачно ако је ни�ка празна.\n"
+"    \n"
+"      -n �ИСК�\n"
+"         �ИСК�            Тачно ако ни�ка није празна.\n"
+"    \n"
+"      �ИСК�1 = �ИСК�2     Тачно ако �у ни�ке једнаке.\n"
+"      �ИСК�1 != �ИСК�2    Тачно ако ни�ке ни�у једнаке.\n"
+"      �ИСК�1 < �ИСК�2     Тачно ако �ИСК�1 долази пре �ИСКЕ2 "
+"лек�икограф�ки.\n"
+"      �ИСК�1 > �ИСК�2     Тачно ако �ИСК�1 долази по�ле �ИСКЕ2 "
+"лек�икограф�ки.\n"
+"    \n"
+"    О�тали оператори:\n"
+"    \n"
+"      -o ОПЦИЈ�           Тачно ако је опција шкољке ОПЦИЈ� укључена.\n"
+"      -v ПРОМ             Тачно ако је променљива шкољке ПРОМ подешена\n"
+"      -R ПРОМ             Тачно ако је променљива шкољке ПРОМ подешена и ако "
+"је упута назива.\n"
+"      ! ИЗР�З             Тачно ако је израз нетачан.\n"
+"      ИЗР�З1 -a ИЗР�З2    Тачно ако је тачан и израз1 И израз2.\n"
+"      ИЗР�З1 -o ИЗР�З2    Тачно ако је тачан или израз1 ИЛИ израз2.\n"
+"    \n"
+"      арг1 ОП арг2        �ритметичка проба.  ОП је једно од �ледећег: -eq, -"
+"ne,\n"
+"                          -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    �ритметички двочлани оператори дају тачно ако је �РГ1 једнак, није-"
+"једнак,\n"
+"    мањи-од, мањи-од-или-једнак, већи-од, или већи-од-или-једнак �а �РГ2.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат ако �е ИЗР�З процени на тачно; неу�пех ако �е "
+"ИЗР�З процени\n"
+"    на нетачно или ако је дат неи�праван аргумент."
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Процењује у�ловни израз.\n"
+"    \n"
+"    Ово је �иноним за уграђено�т „test“, али по�ледњи аргумент мора\n"
+"    бити до�ловна ], да поклопи отворену [."
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Приказује времена проце�а.\n"
+"    \n"
+"    И�пи�ује нагомилана времена кори�ника и �и�тема за шкољку и за �ве\n"
+"    њене прои�текле проце�е.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Увек у�пешно."
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"Хвата �игнале и друге догађаје.\n"
+"    \n"
+"    Одређује и покреће руковаоце који ће бити покренути када шкољка прими\n"
+"    �игнале или друге у�лове.\n"
+"    \n"
+"    �РГ је наредба за читање и извршавање када шкољка прими ОДРЕДБУ_СИГ��Л�\n"
+"    �игнала.  �ко �РГ недо�таје (а до�тављена је једна ОДРЕДБ�_СИГ��Л�) или\n"
+"    „-“, �ваки наведени �игнал �е враћа на првобитну вредно�т.  �ко је �РГ\n"
+"    ништавна ни�ка �вака ОДРЕДБ�_СИГ��Л� �е занемарује од �тране шкољке и "
+"од\n"
+"    наредби које призива.\n"
+"    \n"
+"    �ко је ОДРЕДБ�_СИГ��Л� ИЗ�ЂИ (0) �РГ �е извршава при изла�ку из шкољке.\n"
+"    �ко је ОДРЕДБ�_СИГ��Л� ПРОЧИСТИ, �РГ �е извршава пре �ваке једно�тавне\n"
+"    наредбе. �ко је ОДРЕДБ�_СИГ��Л� ВР�ТИ, �РГ �е извршава �ваки пут када "
+"�е\n"
+"    заврши извршавање функције шкољке или �пи�а покренутих . или "
+"уграђено�ти\n"
+"    извора.  ОДРЕДБ�_СИГ��Л� или ГРЕШК� значи извршавање �РГ-а �ваки пут "
+"када\n"
+"    би неу�пех наредбе довео до изла�ка шкољке када је укључена опција „-"
+"e“.\n"
+"    \n"
+"    �ко ни�у до�тављени аргументи, „trap“ и�пи�ује �пи�ак наредби "
+"придружених\n"
+"    �ваком �игналу.\n"
+"    \n"
+"    Опције:\n"
+"      -l\tи�пи�ује �пи�ак назива �игнала и њихових одговарајућих бројева\n"
+"      -p\tприказује наредбе хватања придружене �вакој ОДРЕДБИ_СИГ��Л�\n"
+"    \n"
+"    Свака ОДРЕДБ�_СИГ��Л� је или назив �игнала у <signal.h> или број "
+"�игнала.\n"
+"    �азиви �игнала ни�у о�етљиви на величину �лова а префик� СИГ је опција.\n"
+"    Сигнал може бити по�лат шкољци помоћу „kill -signal $$“.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им за неи�правну ОДРЕДБ�_СИГ��Л� или за "
+"неи�правну опцију."
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"Приказује податке о вр�ти наредбе.\n"
+"    \n"
+"    За �ваки ��ЗИВ, показује како би био тумачен ако би �е кори�тио као\n"
+"    назив наредбе.\n"
+"    \n"
+"    Опције:\n"
+"      -a\tприказује �ва ме�та која �адрже извршну под називом ��ЗИВ;\n"
+"    \t        укључује п�еудониме, уграђено�ти, и функције, ако и �амо ако\n"
+"    \t        опција „-p“ није такође коришћена\n"
+"      -f\tпоти�кује тражење функције шкољке\n"
+"      -P\tприморава претрагу ПУТ�ЊЕ за �ваким ��ЗИВОМ, чак и ако је "
+"п�еудоним,\n"
+"    \t        уграђено�т, или функција, и враћа назив датотеке ди�ка која ће "
+"бити\n"
+"    \t        извршена\n"
+"      -p\tдаје или назив датотеке ди�ка која ће бити извршена, или ништа\n"
+"    \t        ако „type -t ��ЗИВ“ неће дати „датотеку“.\n"
+"      -t\tи�пи�ује једну реч која је једна од �ледећих: „alias“, „keyword“,\n"
+"    \t        „function“, „builtin“, „file“ или „“, ако је ��ЗИВ п�еудоним, "
+"реч\n"
+"    \t        резерви�ана шкољком, функција шкољке, уграђено�т шкољке, "
+"датотека ди�ка,\n"
+"                или ако није пронађена\n"
+"    \n"
+"    �ргументи:\n"
+"      ��ЗИВ\t�азив наредбе за тумачење.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат ако �у пронађени �ви ��ЗИВИ; неу�пех ако ниједан "
+"није пронађен."
+
+#: builtins.c:1431
+#, fuzzy
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Мења ограничења изворишта шкољке.\n"
+"    \n"
+"    Обезбеђује управљање над извориштима до�тупним шкољци и обрађује\n"
+"    његово �тварање, на �и�темима који омогућавају такво управљање.\n"
+"    \n"
+"    Опције:\n"
+"      -S\tкори�ти „меко“ ограничење изворишта\n"
+"      -H\tкори�ти „јако“ ограничење изворишта\n"
+"      -a\tизвештено је о �вим текућим ограничењима\n"
+"      -b\tвеличина међумеморије прикључнице\n"
+"      -c\tнајвећа величина �творених кључних датотека\n"
+"      -d\tнајвећа величина подеока податка проце�а\n"
+"      -e\tнајвећа хитно�т заказивања („фино“)\n"
+"      -f\tнајвећа величина датотеке коју запише шкољка и њен пород\n"
+"      -i\tнајвећи број �игнала на чекању\n"
+"      -k\tнајвећи број к-чекања додељених овом проце�у\n"
+"      -l\tнајвећа величина коју проце� може да закључа у меморији\n"
+"      -m\tнајвећа величина боравишног �купа\n"
+"      -n\tнајвећи број отворених опи�ника датотеке\n"
+"      -p\tвеличина међумеморије �појке\n"
+"      -q\tнајвећи број бајтова у редовима поруке ПОСИКС-а\n"
+"      -r\tнајвећа хитно�т заказивања у �тварном времену\n"
+"      -s\tнајвећа величина �премника\n"
+"      -t\tнајвећи изно� времена проце�ора у �екундама\n"
+"      -u\tнајвећи број кори�ничких проце�а\n"
+"      -v\tвеличина виртуелне меморије\n"
+"      -x\tнајвећи број закључавања датотеке\n"
+"      -P\tнајвећи број п�еудотерминала\n"
+"      -T\tнајвећи број нити\n"
+"    \n"
+"    �и�у �ве опције до�тупне на �вим платформама.\n"
+"    \n"
+"    �ко је дато ОГР��ИЧЕЊЕ, то је нова вредно�т наведеног изворишта;\n"
+"    по�ебне вредно�ти ОГР��ИЧЕЊ� „soft“, „hard“, и „unlimited“ �тоје\n"
+"    за текуће меко ограничење, текуће јако ограничење, и без ограничења.\n"
+"    У �упротном, тренутна вредно�т наведеног изворишта �е и�пи�ује.  �ко\n"
+"    није дата ниједна опција, онда �е подразумева „-f“.\n"
+"    \n"
+"    Вредно�ти �у у 1024-битном повећавању, изузев за „-t“ која је у "
+"�екундама,\n"
+"    „-p“ која �е повећава за 512 бајта, и „-u“ која је произвољан број\n"
+"    проце�а.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им ако �е не до�тави неи�правна опција или ако "
+"не дође до грешке."
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"Приказује или подешава ма�ку режима датотеке.\n"
+"    \n"
+"    Подешава кори�ничку ма�ку �тварања датотеке на РЕЖИМ.  �ко је РЕЖИМ\n"
+"    изо�тављен, и�пи�ује текућу вредно�т ма�ке.\n"
+"    \n"
+"    �ко РЕЖИМ почиње цифром, тумачи �е као октални број; у �упротном то је\n"
+"    �имболичка ни�ка режима као она коју прихвата „chmod(1)“.\n"
+"    \n"
+"    Опције:\n"
+"      -p\tако је РЕЖИМ изо�тављен, и�пи�ује у облику који може бити поново "
+"коришћен као улаз\n"
+"      -S\tчини излаз �имболичким; у �упротном излаз је октални број\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им ако је РЕЖИМ неи�праван или ако је дата "
+"неи�правна опција."
+
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"Чека на довршавање по�ла и даје излазно �тање.\n"
+"    \n"
+"    Чека на �ваки проце� одређен ИБ-ом, који може бити ИБ проце�а или\n"
+"    одредба по�ла, и извештава о његовом �тању окончавања.  �ко ИБ није\n"
+"    дат, чека на �ве тренутно радне потпроце�е, а излазно �тање је нула.\n"
+"    �ко је ИБ одредба по�ла, чека на �ве проце�е у тој �појници по�ла.\n"
+"    \n"
+"    �ко је до�тављена опција „-n“, чека на �ледећи по�ао да заврши и\n"
+"    и�пи�ује његово излазно �тање.\n"
+"    \n"
+"    �ко је до�тављена опција „-f“, а контрола по�ла је укључена, чека на\n"
+"    наведени ИБ да оконча, уме�то да чека на њега да промени �тату�.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    И�пи�ује �тање по�ледњег ИБ-а; неу�пех ако је ИБ неи�праван или ако је\n"
+"    дата неи�правна опција."
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"Чека на довршавање проце�а и даје излазно �тање.\n"
+"    \n"
+"    Чека на �ваки проце� наведен ПИБ-ом и извештава о његовом излазном "
+"�тању.\n"
+"    �ко ПИБ ниије дат, чека на �ве тренутно радне потпроце�е, а враћено "
+"�тање\n"
+"    је нула.  ПИБ мора бити ИБ проце�а.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    И�пи�ује �тање по�ледњег ПИБ-а; неу�пех ако је ПИБ неи�праван или ако је "
+"дата\n"
+"    неи�правна опција."
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Извршава наредбе за �ваког члана на �пи�ку.\n"
+"    \n"
+"    Петља `„for“ извршава низ наредбиза �ваког члана на �пи�ку �тавки.\n"
+"    �ко „in WORDS ...;“ није при�утно, тада �е подразумева „in \"$@\"“.\n"
+"    За �ваки елемент у РЕЧИМ�, ��ЗИВ �е подешава на тај елемент, и\n"
+"    ��РЕДБЕ �е извршавају.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    И�пи�ује �тање по�ледње извршене наредбе."
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"�ритметика за петљу.\n"
+"    \n"
+"    И�то што и\n"
+"    \t(( ИЗР�З1 ))\n"
+"    \twhile (( ИЗР�З2 )); do\n"
+"    \t\t��РЕДБЕ\n"
+"    \t\t(( ИЗР�З3 ))\n"
+"    \tdone\n"
+"    ИЗР�З1, ИЗР�З2, и ИЗР�З3 је�у аритметички изрази.  �ко је изо�тављен "
+"неки израз,\n"
+"    понаша �е као да �е процењује на 1.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    И�пи�ује �тање по�ледње извршене наредбе."
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Бира речи �а �пи�ка и извршава наредбе.\n"
+"    \n"
+"    РЕЧИ �у раширене, �тварајући �пи�ак речи.  Скуп раширених\n"
+"    речи �е и�пи�ује на �тандардној грешци, где �вакој претходи\n"
+"    број.  �ко „in WORDS“ није при�утно, подразумева �е „in \"$@\"“.\n"
+"    ПС3 упит �е тада приказује а ред �е чита �а �тандардног улаза.\n"
+"    �ко �е ред �а�тоји од броја који одговара једној од приказаних\n"
+"    речи, тада �е ��ЗИВ подешава на ту реч.  �ко је ред празан,\n"
+"    РЕЧИ и упит �е поново приказују.  �ко је прочитан крај датотеке, \n"
+"    наредба �е довршава.  Свака друга прочитана вредно�т доводи\n"
+"    до тога да ��ЗИВ бива подешен на ништа.  Читање реда �е чува\n"
+"    у променљивој ОДГОВОРИ.  ��РЕДБЕ �е извршавају након �ваког\n"
+"    избора �ве док �е не изврши наредба за прекид.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    И�пи�ује �тање по�ледње извршене наредбе."
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"Извештава о утрошеном времену извршавањем �појног реда.\n"
+"    \n"
+"    Извршава СПОЈ�ИРЕД и и�пи�ује �ажетак �тварног времена, кори�ничког\n"
+"    времена проце�ора, и времена �и�тем�ког проце�ора утрошеног на\n"
+"    извршавање СПОЈ�ОГРЕД� када �е оконча.\n"
+"    \n"
+"    Опције:\n"
+"      -p\tи�пи�ује �ажетак времена у прено�ном запи�у По�ик�а\n"
+"    \n"
+"    Вредно�т променљиве З�ПИС�ВРЕМЕ�� �е кори�ти као излазни запи�.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Стање резултата је�те �тање резултата СПОЈ�ОГРЕД�."
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Извршава наредбе на о�нову поклапања шаблона.\n"
+"    \n"
+"    Изборно извршава ��РЕДБЕ на о�нову РЕЧИ која поклапа Ш�БЛО�.\n"
+"    | �е кори�ти за раздвајање више шаблона.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    И�пи�ује �тање по�ледње извршене наредбе."
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Извршава наредбе на о�нову у�ловно�ти.\n"
+"    \n"
+"    Извршава �е �пи�ак „if ��РЕДБЕ“.  �ко је његово излазно �тање нула, тада "
+"�е\n"
+"    извршава �пи�ак „then ��РЕДБЕ“.  У �упротном, �ваки �пи�ак „elif "
+"��РЕДБЕ“\n"
+"    �е извршава на �мену, и ако је његово излазно �тање нула, одговарајући "
+"�пи�ак\n"
+"    „then ��РЕДБЕ“ �е извршава и наредба „if“ �е завршава.  У �упротном, "
+"извршава\n"
+"    �е �пи�ак „else ��РЕДБЕ“, ако по�тоји.  Излазно �тање читаве "
+"кон�трукције је\n"
+"    излазно �тање по�ледње извршене наредбе, или нула ако нема и�пробаног "
+"у�лова.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    И�пи�ује �тање по�ледње извршене наредбе."
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Извршава наредбе након што �е проба у�пешно обави.\n"
+"    \n"
+"    Шири и извршава ��РЕДБЕ након што завршна наредба у „while“ ��РЕДБ�М�\n"
+"    има излазно �тање нуле.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    И�пи�ује �тање по�ледње извршене наредбе."
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Извршава наредбе након што �е проба у�пешно обави.\n"
+"    \n"
+"    Шири и извршава ��РЕДБЕ након што завршна наредба у „until“ ��РЕДБ�М�\n"
+"    има излазно �тање које није нула.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    И�пи�ује �тање по�ледње извршене наредбе."
+
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"Ствара копроце� под називом ��ЗИВ.\n"
+"    \n"
+"    Извршава наредбу не�агла�но, �а �тандардним излазом и �тандардним\n"
+"    улазом наредбе повезане путем �појке �а опи�ницима датотека додељених\n"
+"    да назначе 0 и 1 ��ЗИВ� променљиве низа у шкољци извршавања.\n"
+"    О�новни ��ЗИВ је „COPROC“.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    �аредба копроце�а даје излазно �тање 0."
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"Одређује функцију шкољке.\n"
+"    \n"
+"    Ствара функцију шкољке под називом ��ЗИВ.  Када �е призове као једна "
+"наредба,\n"
+"    ��ЗИВ покреће ��РЕДБЕ у контек�ту шкољке позивања.  Када �е призове "
+"��ЗИВ,\n"
+"    аргументи �е про�леђују функцији као $1...$n, а назив функције �е налази "
+"у\n"
+"    $��ЗИВУ_ФУ�КЦИЈЕ.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им ако је ��ЗИВ �амо за читање."
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Групише наредбе као јединицу.\n"
+"    \n"
+"    Покреће �куп наредби у групи.  Ово је један од начина за преу�меравање\n"
+"    читавог �купа наредби.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    И�пи�ује �тање по�ледње извршене наредбе."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"�а�тавља по�ао у првом плану.\n"
+"    \n"
+"    И�то као и аргумент ОДРЕДБ�_ПОСЛ� у наредби „fg“.  �а�тавља зау�тављени\n"
+"    или по�ао у позадини.  ОДРЕДБ�_ПОСЛ� може да наведе назив по�ла или "
+"број\n"
+"    по�ла.  Пропративши ОДРЕДБУ_ПОСЛ� �а & по�тавља по�ао у позадину, као\n"
+"    да је одредба по�ла до�тављена као аргумент уз „bg“.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје �тање на�тављеног по�ла."
+
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Процењује аритметички израз.\n"
+"    \n"
+"    ИЗР�З �е процењује у �кладу �а правилима за аритметичко процењивање.\n"
+"    И�то што и „let ИЗР�З“.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје 1 ако �е ИЗР�З процени на 0; у �упротном даје 0."
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"Извршава у�ловну наредбу.\n"
+"    \n"
+"    Даје �тање 0 или 1 у зави�но�ти од процене у�ловног израз ИЗР�З.\n"
+"    Изрази �у �а�тављени од и�тих примарних које кори�ти уграђено�т\n"
+"    „test“, и може бити комбиновано употребом �ледећих оператора:\n"
+"    \n"
+"      ( ИЗР�З )\t        Даје вредно�т ИЗР�З�\n"
+"      ! ИЗР�З\t\tТачно ако је ИЗР�З нетачан; у �упротном нетачно\n"
+"      ИЗР�З1 && ИЗР�З2\tТачно ако �у и ИЗР�З1 и ИЗР�З2 тачни; у �упротном "
+"нетачно\n"
+"      ИЗР�З1 || ИЗР�З2\tТачно ако је или ИЗР�З1 или ИЗР�З2 тачан; у "
+"�упротном нетачно\n"
+"    \n"
+"    К�да �е кори�те оператори „==“ и „!=“, ни�ка �а де�не �тране оператора\n"
+"    �е кори�ти као шаблон а поређење �а шаблоном �е обавља.  Када �е "
+"кори�ти\n"
+"    оператор „=~“, ни�ка �а де�не �тране оператора �е поклапа као регуларни\n"
+"    израз.\n"
+"    \n"
+"    Оператори && и || не процењују ИЗР�З2 ако је ИЗР�З1 довољан за "
+"одређивање\n"
+"    вредно�ти израза.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    0 или 1 у зави�но�ти од вредно�т ИЗР�З�."
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"Општи називи променљивих шкољке и употреба.\n"
+"    \n"
+"    ИЗД�ЊЕ_Б�Ш�         Подаци о издању за овај Баш.\n"
+"    ЦДПУТ�Њ�            Спи�ак директоријума раздвојен двотачком за тражење\n"
+"                        директоријума који �у дати као аргументи за „cd“.\n"
+"    ОПШТЕЗ��ЕМ�РИ       Спи�ак шаблона раздвојен двотачком који опи�ује "
+"називе\n"
+"                        датотека који ће бити занемарени ширењем назива "
+"путање.\n"
+"    ИСТОРИОТЕК�         �азив датотеке у којој је �мештен и�торијат "
+"наредби.\n"
+"    ВЕЛИЧИ��ИСТОРИОТЕКЕ �ајвећи број редова које може да �адржи ова "
+"датотека.\n"
+"    ВЕЛИЧИ��ИСТОРИЈ�Т�  �ајвећи број редова и�торијата којима покренута\n"
+"                        шкољка може да при�тупи.\n"
+"    ЛИЧ�О               Потпуна путања до вашег директоријума пријављивања.\n"
+"    ��ЗИВДОМ�ЋИ��       �азив текућег домаћина.\n"
+"    ВРСТ�ДОМ�ЋИ��       Вр�та проце�ора под којим ради ово издање Баша.\n"
+"    З��ЕМ�РИКРД         Управља радњом шкољке при пријему знака за крај "
+"датотеке\n"
+"                        �амо као улаза.  �ко је подешено, онда је његова "
+"вредно�т\n"
+"                        број знакова КРД-а који могу бити виђени у реду "
+"празног\n"
+"                        реда пре него ли шкољка изађе (о�новно је 10).  "
+"Када\n"
+"                        није подешено, КРД значи крај улаза.\n"
+"    ВРСТ�М�ШИ�Е         �и�ка која опи�ује текући �и�тем на коме је Баш "
+"покренут.\n"
+"    ПРОВЕР�ПОШТЕ        Колико че�то, у �екундама, Баш првоерава нову "
+"пошту.\n"
+"    ПУТ�Њ�ПОШТЕ         Спи�ак датотека раздвојен двотачком које Баш "
+"проверава\n"
+"                        за новом поштом.\n"
+"    ВРСТ�ОС�            Издање Јуник�а на коме је покренуто ово издање "
+"Баша.\n"
+"    ПУТ�Њ�              Спи�ак директоријума раздвојен двотачком за "
+"претрагу\n"
+"                        приликом тражења наредби.\n"
+"    ��РЕДБ�_УПИТ�       �аредба која ће бити извршена пре и�пи�ивања �ваког\n"
+"                        главног упита.\n"
+"    �ГУ1                �и�ка главног упита.\n"
+"    �СУ2                �и�ка �поредног упита.\n"
+"    ШРД                 Пуна путања текућег директоријума.\n"
+"    ОПЦИЈЕШКОЉКЕ        Спи�ак раздвојен двотачком укључених опција шкољке.\n"
+"    ТЕРМИ��Л            �азив вр�те текућег терминала.\n"
+"    З�ПИСВРЕМЕ��        Излазни запи� за �тати�тике времена које приказује\n"
+"                        резерви�ана реч „time“.\n"
+"    �ам_на�тави         �е-ништа значи да је реч наредбе која �е појављује "
+"на реду\n"
+"                        �ама по �еби прва тражена на �пи�ку тренутно "
+"зау�тављених\n"
+"                        по�лова.  �ко �е ту пронађе, тај по�ао �е по�тавља у "
+"први\n"
+"                        план.  Вредно�т „exact“ значи да реч наредбе мора "
+"тачно да\n"
+"                        одговара наредби на �пи�ку зау�тављених по�лова.  "
+"Вредно�т\n"
+"                        „substring“ значи да реч наредбе мора да одговара "
+"подни�ци\n"
+"                        по�ла.  Свака друга вредно�т значи да наредба мора "
+"бити\n"
+"                        префик� зау�тављеног по�ла.\n"
+"    знаки�торијата      Знаци који управљају ширењем и�торијата и брзом "
+"заменом.\n"
+"                        Први знак је�те знак замене и�торијата, обично је то "
+"„!“.\n"
+"                        Други је�те знак „брзе замене“, обично је то „^“.  "
+"Трећи\n"
+"                        је�те знак „напомене и�торијата“, обично је то „#“.\n"
+"    З��ЕМ�РИИСТОРИЈ�Т   Спи�ак шаблона раздвојен двотачком коришћених за "
+"одлучивање\n"
+"                        о наредбама које требају бити �ачуване на �пи�ку "
+"и�торијата.\n"
+
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Додаје директоријуме у �премник.\n"
+"    \n"
+"    Додаје директоријум на врх �премника директоријума, или окреће\n"
+"    �премник, чинећи нови први у �премнику текућим радним директоријумом.\n"
+"    Без аргумената, замењује два прва директоријума.\n"
+"    \n"
+"    Опције:\n"
+"      -n\tПоти�кује нормалну замену директоријума приликом додавања\n"
+"    \t        директоријума у �премник, тако да �е ради �амо �а �премником.\n"
+"    \n"
+"    �ргументи:\n"
+"      +N\tОкреће �премник тако да је N-ти директоријум на врху (бројећи\n"
+"                �а леве �тране �пи�ка кога приказује „dirs“, почевши од "
+"нуле).\n"
+"    \n"
+"      -N\tОкреће �премник тако да је N-ти директоријум на врху (бројећи\n"
+"                �а де�не �тране �пи�ка кога приказује „dirs“, почевши од "
+"нуле).\n"
+"    \n"
+"      dir\tДодајеs ДИР у �премник директоријума на врху, учинивши га новим\n"
+"    \t        текућим радним директоријумом.\n"
+"    \n"
+"    Уграђено�т „dirs“ приказује �премник директоријума.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им ако није до�тављен неи�праван аргумент или "
+"замена\n"
+"    директоријума не у�пе."
+
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Уклања директоријуме из �премника.\n"
+"    \n"
+"    Уклања уно�е из �премника директоријума.  Без аргумената, уклања први\n"
+"    директоријум из �премника, и пребацује на нови први директоријум.\n"
+"    \n"
+"    Опције:\n"
+"      -n\tПоти�кује уобичајену замену директоријума приликом уклањања\n"
+"    \t        директоријума из �премника, тако да �е ради �амо �а "
+"�премником.\n"
+"    \n"
+"    �ргументи:\n"
+"      +N\tУклања N-ти уно� почевши �а леве �тране �пи�ка кога приказује\n"
+"    \t        „dirs“, почевши од нуле.  �а пример: „popd +0“ уклања први\n"
+"    \t        директоријум, „popd +1“ други.\n"
+"    \n"
+"      -N\tУклања N-ти уно� почевши �а де�не �тране �пи�ка кога приказује\n"
+"    \t        „dirs“, почевши од нуле.  �а пример: „popd -0“ уклања "
+"по�ледњи\n"
+"    \t        директоријум, „popd -1“ претпо�ледњи.\n"
+"    \n"
+"    Уграђено�т „dirs“ приказује �премник директоријума.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им ако није до�тављен неи�праван аргумент или "
+"измена\n"
+"    директоријума не у�пе."
+
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Приказује �премник директоријума.\n"
+"    \n"
+"    Приказује �пи�ак тренутно запамћених директоријума.  Директоријуми\n"
+"    налазе �вој пут до �пи�ка помоћу наредбе „pushd“; можете да �е вратите\n"
+"    назад на �пи�ак помоћу наредбе „popd“.\n"
+"    \n"
+"    Опције:\n"
+"      -c\tчи�ти �премник директоријума бри�ањем �вих елемената\n"
+"      -l\tне и�пи�ује издања директоријума �а предметком тилде\n"
+"    \t        одно�не на ваш лични директоријум\n"
+"      -p\tи�пи�ује �премник директоријума �а једним уно�ом у реду\n"
+"      -v\tи�пи�ује �премник директоријума �а једним уно�ом у реду\n"
+"                �а предметком �вог положаја у �премнику\n"
+"    \n"
+"    �ргументи:\n"
+"      +N\tПриказујеs N-ти уно� бројећи �а леве �тране на �пи�ку кога\n"
+"                приказује „dirs“ када �е призове без опција, почевши од "
+"нуле.\n"
+"    \n"
+"      -N\tПриказујеs N-ти уно� бројећи �а де�не �тране на �пи�ку кога\n"
+"                приказује „dirs“ када �е призове без опција, почевши од "
+"нуле.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им ако �е не до�тави неи�правна опција или ако "
+"не дође до грешке."
+
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"Подешава и ра�подешава опције шкољке.\n"
+"    \n"
+"    Мења подешавање �ваке оције шкољке ��ЗИВ_ОПЦИЈЕ.  Без аргумената "
+"опција,\n"
+"    и�пи�ује �ваки до�тављени ��ЗИВ_ОПЦИЈЕ, или �ве опције шкољке ако није\n"
+"    дат ниједан ��ЗИВ_ОПЦИЈЕ, �а назнаком да ли је �вака подешена или није.\n"
+"    \n"
+"    Опције:\n"
+"      -o\tограничава ��ЗИВЕ_ОПЦИЈ� на оне одређене за коришћење �а „set -o“\n"
+"      -p\tи�пи�ује �ваку опцију љу�ке �а назнаком њеног �тања\n"
+"      -q\tпоти�кује излаз\n"
+"      -s\tукључује (подешава) �ваки ��ЗИВ_ОПЦИЈЕ\n"
+"      -u\tи�кључује (ра�подешава) �ваки ��ЗИВ_ОПЦИЈЕ\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат ако је ��ЗИВ_ОПЦИЈЕ укључен; неу�пех ако је "
+"дата\n"
+"    неи�правна опција или ако је ��ЗИВ_ОПЦИЈЕ и�кључен."
+
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"Обликује и и�пи�ује �РГУМЕ�ТЕ под управом З�ПИС�.\n"
+"    \n"
+"    Опције:\n"
+"      -v пром\tдодељује излаз променљивој шкољке ПРОМ уме�то да га\n"
+"    \t\tприкаже на �тандардном излазу\n"
+"    \n"
+"    З�ПИС је�те ни�ка знака која �адржи три вр�те објекта: обични знаци,\n"
+"    који �е једно�тавно умножавају на �тандардни излаз; низови прекида\n"
+"    знака, који �е претварају и умножавају на �тандардни излаз; и одредбе\n"
+"    запи�а, од којих �вака доводи до и�пи�ивања �ледећег наредног "
+"аргумента.\n"
+"    \n"
+"    Као додатак одредбама �тандардног запи�а опи�аних у „printf(1)“,\n"
+"    „printf“ тумачи:\n"
+"    \n"
+"      %b\tшири низове прекида контра ко�е црте у одговарајући аргумент\n"
+"      %q\tцитира аргумент на начин како би био коришћен као улаз шкољке\n"
+"      %(fmt)T   и�пи�ује ни�ку датум-време резултирајући коришћењем ФМТ-а "
+"као\n"
+"                ни�ке запи�а за „strftime(3)“\n"
+"    \n"
+"    Запи� �е поново кори�ти јер је потребно утрошити �ве аргументе.  �ко\n"
+"    има више аргумената него што то захтева запи�, излишне одредбе запи�а\n"
+"    �е понашају као да је до�тављена вредно�т нуле или ништавна ни�ка.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им ако није дата неи�правна опција или ако не\n"
+"    дође до грешке пи�ања или доделе."
+
+#: builtins.c:1971
+#, fuzzy
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"�аводи како ће аргументе да доврши Читај ред.\n"
+"    \n"
+"    За �ваки ��ЗИВ, наводи како ће аргументи бити довршени.  �ко опције\n"
+"    ни�у до�тављене, по�тојеће одредбе довршавања �е и�пи�ују на начин\n"
+"    који омогућава да буду поново коришћене као улаз.\n"
+"    \n"
+"    Опције:\n"
+"      -p\tи�пи�ује по�тојеће одредбе довршавања у поново употребљивом "
+"запи�у\n"
+"      -r\tуклања одредбу довршавања за �ваки ��ЗИВ, или, ако ��ЗИВИ ни�у\n"
+"    \t        до�тављени, �ве одредбе довршавања\n"
+"      -D\tпримењује довршавања и радње као о�новне за радње\n"
+"    \t        без одређеног по�ебног довршавања\n"
+"      -E\tпримењује довршавања и радње на „празне“ наредбе --\n"
+"    \t        довршавање покушано на празном реду\n"
+"      -I\tпримењује довршавања и радње на почетну (обично наредбу) реч\n"
+"    \n"
+"    Када �е покуша �а довршавањем, радње �е примењују по редо�леду опција\n"
+"    великих �лова наведених горе.  Опција „-D“ има првен�тво над „-E“, и обе "
+"имају предно�т у одно�у на „-I“.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им ако �е не до�тави неи�правна опција или ако "
+"не дође до грешке."
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Приказује могућа довршавања у зави�но�ти од опција.\n"
+"    \n"
+"    Замишљен за коришћење из функције шкољке �тварајући могућа довршавања.\n"
+"    �ко је до�тављен изборни аргумент РЕЧ, �тварају �е поређења �а РЕЧЈУ.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им ако �е не до�тави неи�правна опција или ако "
+"не дође до грешке."
+
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"Мења или приказује опције довршавања.\n"
+"    \n"
+"    Мења опције довршавања за �ваки ��ЗИВ, или, ако ��ЗИВИ ни�у до�тављени,\n"
+"    довршавања које �е тренутно извршава.  �ко ОПЦИЈЕ ни�у дате, и�пи�ује\n"
+"    опције довршавања за �ваки ��ЗИВ или одредбу текућег довршавања.\n"
+"    \n"
+"    Опције:\n"
+"    \t-o опција\tПодешава опцију довршавања ОПЦИЈ� за �ваки ��ЗИВ\n"
+"    \t-D\t\tМења опције за „о�новно“ довршавање наредбе\n"
+"    \t-E\t\tМења опције за „празно“ довршавање наредбе\n"
+"    \t-I\t\tМења опције за довршавање почетне речи\n"
+"    \n"
+"    Употреба „+o“ уме�то „-o“ и�кључује наведену опцију.\n"
+"    \n"
+"    �ргументи:\n"
+"    \n"
+"    Сваки ��ЗИВ упућује на наредбу за коју одредба довршавања мора "
+"претходно\n"
+"    бити одређена употребом уграђено�ти „complete“.  �ко ��ЗИВИ ни�у дати,\n"
+"    „compopt“ мора бити позвано функцијом која тренутно �твара довршавања,\n"
+"    а опције �твараоца који тренутно извршава довршавање �у измењене.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им ако �е не до�тави неи�правна опција или "
+"��ЗИВ\n"
+"    нема одређену одредбу довршавања."
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"Чита редове �а �тандардног улаза у променљивој индек�ираног низа.\n"
+"    \n"
+"    Чита редове �а �тандардног улаза у променљивој индек�ираног низа �ИЗ, "
+"или\n"
+"    из опи�ника датотеке ОД ако је до�тављена опција „-u“.  Променљива "
+"М�ПОТЕК�\n"
+"    је�те о�новни �ИЗ.\n"
+"    \n"
+"    Опције:\n"
+"      -d гранич    Кори�ти ГР��ИЧ�ИК да оконча редове, уме�то новог реда\n"
+"      -n број      Умножава највише БРОЈ редова.  �ко је БРОЈ 0, умножавају "
+"�е �ви редови\n"
+"      -O порекло   Почиње додељивање �ИЗУ при индек�у ПОРЕКЛО.  О�новни "
+"индек� је 0\n"
+"      -s број      Одбацује првих БРОЈ прочитаних редова\n"
+"      -t           Уклања пратећи ГР��ИЧ�ИК из �ваког прочитаног реда "
+"(о�новни нови ред)\n"
+"      -u од        Чита редове из опи�ника датотеке ОД уме�то �а �тандардног "
+"улаза\n"
+"      -C опозив    Процењује ОПОЗИВ �ваког пута када �е прочита КОЛИЧИ�� "
+"редова\n"
+"      -c количина  �аводи број прочитаних редова између �ваког позива за "
+"ОПОЗИВ\n"
+"    \n"
+"    �ргументи:\n"
+"      �ИЗ          �азив променљиве низа за податке датотеке\n"
+"    \n"
+"    �ко је „-C“ до�тављено без „-c“, о�новна количина је 5000.  Када �е\n"
+"    процени ОПОЗИВ, до�тављен је индек� �ледећег елемента низа који ће\n"
+"    бити додељен и ред који ће бити додељен том елементу као додатни\n"
+"    аргументи.\n"
+"    \n"
+"    �ко није до�тављено �а изричитим пореклом, мапфајл ће очи�тити �ИЗ пре\n"
+"    него што му додели.\n"
+"    \n"
+"    Излазно �тање:\n"
+"    Даје позитиван резултат о�им ако није дата неи�правна опција или ако је "
+"�ИЗ �амо\n"
+"    за читање или није индек�ирани низ."
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Чита редове из датотеке у променљиву низа.\n"
+"    \n"
+"    Синоним за „mapfile“."
+
+#, fuzzy
+#~ msgid "Copyright (C) 2019 Free Software Foundation, Inc."
+#~ msgstr "�утор�ка права © 2018 Задужбина �лободног �офтвера, Доо."
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "%s%cИ�пи�ује контек�т текућег позива подрутине.\n"
+#~ "\n"
+#~ "    Без „EXPR“, и�пи�ује"
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process: проце� %5ld (%s) у �појном_реду"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "�епознат �игнал #"
+
+#~ msgid "Copyright (C) 2014 Free Software Foundation, Inc."
+#~ msgstr "�утор�ка права (C) 2014 Задужбина �лободног �офтвера, Доо."
+
+#~ msgid ":"
+#~ msgstr ":"
+
+#~ msgid "true"
+#~ msgstr "true"
+
+#~ msgid "false"
+#~ msgstr "false"
+
+#~ msgid "times"
+#~ msgstr "times"
diff --git a/po/sv.gmo b/po/sv.gmo
new file mode 100644
index 0000000..1b825f6
--- /dev/null
+++ b/po/sv.gmo
diff --git a/po/sv.po b/po/sv.po
new file mode 100644
index 0000000..7f5df52
--- /dev/null
+++ b/po/sv.po
@@ -0,0 +1,5877 @@
+# Swedish translation of bash
+# Copyright © 2008, 2009, 2010, 2011, 2013, 2014, 2015, 2016, 2018, 2019 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+#
+# Göran Uddeborg <goeran@uddeborg.se>, 2008, 2009, 2010, 2011, 2013, 2014, 2015, 2016, 2018, 2019.
+#
+# $Revision: 1.26 $
+msgid ""
+msgstr ""
+"Project-Id-Version: bash 5.0\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2019-02-04 15:33+0100\n"
+"Last-Translator: Göran Uddeborg <goeran@uddeborg.se>\n"
+"Language-Team: Swedish <tp-sv@listor.tp-sv.se>\n"
+"Language: sv\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "felaktigt vektorindex"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr "%s: tar bort attributet namnreferens"
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: det går inte att konvertera en indexerad vektor till associativ"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: ogiltig nyckel till associativ vektor"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: det går inte att tilldela till ickenumeriska index"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr "%s: %s: måste använda index vid tilldelning av associativ vektor"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: det går inte att skapa: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr ""
+"bash_execute_unix_command: det går inte att hitta en tangentbindning för "
+"kommandot"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: första ickeblanka tecknet är inte '\"'"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "ingen avslutande �%c� i %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: kolonseparator saknas"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "�%s�: det går inte att avbinda"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr "klammerexpansion: kan inte allokera minne för %s"
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr "klammerexpansion: misslyckades att allokera minne för %u element"
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr "klammerexpansion: misslyckades att allokera minne för �%s�"
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "�%s�: ogiltigt aliasnamn"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "radredigering är inte aktiverat"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "�%s�: ogiltigt tangentbindningsnamn"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: det går inte att läsa: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "�%s�: okänt funktionsnamn"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s är inte bundet till några tangenter.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s kan anropas via "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "�%s�: det går inte att avbinda"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "slingräknare"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "endast meningsfullt i en �for�-, �while�- eller �until�-slinga"
+
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Returnera kontexten för det aktuella funktionsanropet.\n"
+"    \n"
+"    Utan UTTR, returneras �$rad $filnamn�.  Med UTTR, returneras\n"
+"    �$rad $subrutin $filnamn�.  Denna extra information kan användas för\n"
+"    att ge en stackspårning.\n"
+"    \n"
+"    Värdet på UTTR indikerar hur många anropsramar att gå tillbaka före den\n"
+"    aktuella, toppramen är ram 0.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar 0 om inte skalet inte kör en skalfunktion eller UTTR är\n"
+"    ogiltigt."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "HOME är inte satt"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "för många argument"
+
+#: builtins/cd.def:342
+msgid "null directory"
+msgstr "null-katalog"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "OLDPWD är inte satt"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "rad %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "varning: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: användning: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: flaggan kräver ett argument"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: numeriskt argument krävs"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: finns inte"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: ogiltig flagga"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: ogiltigt flaggnamn"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "�%s�: inte en giltig identifierare"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "ogiltigt oktalt tal"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "ogiltigt hexadecimalt tal"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "ogiltigt tal"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: ogiltig signalspecifikation"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "�%s�: inte en pid eller giltig jobbspecifikation"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: endast läsbar variabel"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s utanför giltigt intervall"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "argument"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s utanför giltigt intervall"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: inget sådant jobb"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: ingen jobbstyrning"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "ingen jobbstyrning"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: begränsat"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "begränsat"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: inte inbyggt i skalet"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "skrivfel: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "fel när terminalattribut ställdes in: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "fel när terminalattribut hämtades: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: fel när aktuell katalog hämtades: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: tvetydig jobbspecifikation"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr "hjälp är inte tillgängligt i denna version"
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: det går inte att ta bort tilldelning: endast läsbar %s"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: det går inte att ta bort tilldelning"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: ogiltigt åtgärdsnamn"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: ingen kompletteringsspecifikation"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "varning: flaggan -F fungerar kanske inte som du väntar dig"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "varning: flaggan -C fungerar kanske inte som du väntar dig"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "kör inte en kompletteringsfunktion"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "kan endast användas i en funktion"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr "%s: en referensvariabel kan inte vara en vektor"
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr "%s: att en namnreferensvariabel självrefererar är inte tillåtet"
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s: cirkulär namnreferens"
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "�%s�: ogiltigt variabelnamn för referens"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "det går inte att använda �-f� för att göra funktioner"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: endast läsbar funktion"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr "%s: citerad sammansatt tilldelning av vektorer undanbedes"
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: det går inte att förstöra vektorvariabler på detta sätt"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: det går inte att konvertera en associativ vektor till indexerad"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "dynamisk laddning är inte tillgängligt"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "det går inte att öppna delat objekt %s: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "kan inte hitta %s i det delade objektet %s: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: inte dynamiskt laddad"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr "inläsningsfunktionen för %s returnerar misslyckande (%d): inte inläst"
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: inte dynamiskt laddad"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: kan inte ta bort: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: är en katalog"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: inte en normal fil"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: filen är för stor"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: det går inte att köra binär fil"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: kan inte köra: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "utloggning\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "inte ett inloggningsskal: använd �exit�"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Det finns stoppade jobb.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Det finns körande jobb.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "hittar inget kommando"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "historiespecifikation"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: det går inte att öppna temporärfil: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "aktuell"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "jobb %d startade utan jobbstyrning"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: ogiltig flagga -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: flaggan kräver ett argument -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "hashning avslaget"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: hashtabellen tom\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "träffar\tkommando\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Skalkommandon som matchar nyckelordet '"
+msgstr[1] "Skalkommandon som matchar nyckelorden '"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"inget hjälpämne matchar �%s�.  Prova �help help� eller �man -k %s� eller "
+"�info %s�."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: det går inte att öppna: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Dessa skalkommandon är definierade internt.  Skriv �help� för att se\n"
+"denna lista.  Skriv �help namn� för att få reda på mer om funktionen\n"
+"�namn�.  Använd �info bash� för att få reda på mer om skalet rent\n"
+"allmänt.  Använd �man -k� eller �info� för att få reda på mer om\n"
+"kommandon som inte är i listan.\n"
+"\n"
+"En stjärna (*) bredvid ett namn betyder att det kommandot är avstängt.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "det går inte att använda mer än en av -anrw"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "historieposition"
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: ogiltig tidsstämpel"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: historieexpansionen misslyckades"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: inlib misslyckades"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "inga andra flaggor är tillåtna med �-x�"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: argument måste vara processer eller jobb-id:n"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Okänt fel"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "uttryck förväntades"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: inte en indexerad vektor"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: ogiltig filbeskrivarspecifikation"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: ogiltig filbeskrivare: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: ogiltigt radantal"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: ogiltig vektorstart"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: ogiltigt kvantum för återanrop"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "tomt vektorvariabelnamn"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "stöd för vektorvariabler krävs"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "�%s�: formateringstecken saknas"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "�%c�: ogiltig specifikation av tidsformat"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "�%c�: ogiltigt formateringstecken"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "varning: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "formattolkningsproblem: %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "hexadecimal siffra saknas för \\x"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "unicode-siffra saknas för \\%c"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "ingen annan katalog"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s: ogiltigt argument"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<ingen aktuell katalog>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "katalogstacken är tom"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "katalogstackindex"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Visa listan av kataloger i minnet just nu.  Kataloger hamnar i listan\n"
+"    med kommandot �pushd�.  Du kan komma tillbaka upp genom listan med\n"
+"    kommandot �popd�.\n"
+"    \n"
+"    Flaggor:\n"
+"      -c\tnollställ katalogstacken genom att bo bort alla elementen\n"
+"      -l\tskriv inte ut versioner med tildeprefix av kataloger som är\n"
+"    \trelativa din hemkatalog\n"
+"      -p\tskriv katalogstacken med en post per rad\n"
+"      -v\tskriv katalogstacken med en post per rad inledda med dess\n"
+"    \tposition i stacken\n"
+"    \n"
+"    Argument:\n"
+"      +N\tVisa den N:e posten räknat från vänster i listan som visas\n"
+"    \tav dirs när det anropas utan flaggor, räknat från noll.\n"
+"    \n"
+"      -N\tVisa den N:e posten räknat från höger i listan som visas\n"
+"\tav dirs när det anropas utan flaggor, räknat från noll."
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Lägger till en katalog till toppen av katalogstacken, eller roterar\n"
+"    stacken, och gör den nya toppen av stacken till den aktuella\n"
+"    arbetskatalogen.  Utan argument, byt de två toppkatalogerna.\n"
+"    \n"
+"    Flaggor:\n"
+"      -n\tUndertryck det normala bytet av katalog när kataloger\n"
+"    \tläggs till på stacken, så att endast stacken ändras.\n"
+"    \n"
+"    Argument:\n"
+"      +N\tRoterar stacken så att den N:e katalogen (räknat från\n"
+"    \tvänster i listan som visas av �dirs�, med början på noll) hamnar\n"
+"    \tpå toppen.\n"
+"    \n"
+"      -N\tRoterar stacken så att den N:e katalogen (räknat från\n"
+"    \thöger i listan som visas av �dirs�, med början på noll) hamnar\n"
+"    \tpå toppen.\n"
+"    \n"
+"      kat\tLägger till KAT till toppen av katalogstacken, och gör den\n"
+"    \ttill den nya aktuella arbetskatalogen.\n"
+"    \n"
+"    Den inbyggda �dirs� visar katalogstacken."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Tar bort poster från katalogstacken.  Utan argument tas den översta\n"
+"    katalogen bort från stacken, och byte görs till den nya toppkatalogen.\n"
+"    \n"
+"    Flaggor:\n"
+"      -n\tUndertryck det normala bytet av katalog när kataloger\n"
+"    \tläggs till på stacken, så att endast stacken ändras.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tTar bort den N:e posten räknat från vänster i listan\n"
+"    \tsom visas av �dirs�, med början på noll.  Till exempel: �popd +0�\n"
+"    \ttar bort den första katalogen, �popd +1� den andra.\n"
+"    \n"
+"      -N\tTar bort den N:e posten räknat från höger i listan\n"
+"    \tsom visas av �dirs�, med början på noll.  Till exempel: �popd -0�\n"
+"    \ttar bort den sista katalogen, �popd -1� den näst sista.\n"
+"    \n"
+"    Den inbyggda �dirs� visar katalogstacken."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: ogiltig tidsgränsspecifikation"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "läsfel: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr ""
+"det går bara att göra �return� från en funktion eller källinläst skript"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "det går inte att samtidigt ta bort en funktion och en variabel"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: inte en vektorvariabel"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: inte en funktion"
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr "%s: det går inte att exportera"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "skiftantal"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "det går inte att sätta och ta bort skalflaggor samtidigt"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: ogiltigt skalflaggsnamn"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "filnamnsargument krävs"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: filen finns inte"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "det går inte att suspendera"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "det går inte att suspendera ett inloggningsskal"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s är ett alias för �%s�\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s är ett nyckelord i skalet\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s är en funktion\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s är en special inbyggd i skalet\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s är inbyggt i skalet\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s är %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s är hashad (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: ogiltigt gränsargument"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "�%c�: felaktigt kommando"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: kan inte avgöra gränsen: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "gräns"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: kan inte ändra gränsen: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "oktalt tal"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "�%c�: ogiltig operator för symboliskt läge"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "�%c�: ogiltigt tecken för symboliskt läge"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " rad "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "senaste kommando: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Avbryter..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr "INFORMATION: "
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "okänt kommandofel"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "felaktig kommandotyp"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "felaktig anslutning"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "felaktigt hopp"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: obunden variabel"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\atiden gick ut i väntan på indata: automatisk utloggning\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "det går inte att omdirigera standard in från /dev/null: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "TIMEFORMAT: �%c�: ogiltigt formateringstecken"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr "execute_coproc: coproc [%d:%s] finns fortfarande"
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "rörfel"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr "eval: maximal nästning av eval överskriden (%d)"
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr "%s: maximal nästning av source överskriden (%d)"
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr "%s: maximal nästning av funktioner överskriden (%d)"
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: begränsat: det går inte att ange �/� i kommandonamn"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: kommandot finns inte"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: felaktig tolk"
+
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: det går inte att köra binär fil: %s"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "�%s�: är en speciell inbyggd"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "det går inte att duplicera fb %d till fb %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "rekursionsnivå i uttryck överskriden"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "underspill i rekursionsstacken"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "syntaxfel i uttrycket"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "försök att tilldela till en icke-variabel"
+
+#: expr.c:530
+msgid "syntax error in variable assignment"
+msgstr "syntaxfel i variabeltilldelning"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "division med 0"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "fel: felaktig expassign-symbol"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "�:� förväntades i villkorligt uttryck"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "exponenten är mindre än 0"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "en identifierare förväntades efter pre-ökning eller pre-minskning"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "�)� saknas"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "syntaxfel: en operand förväntades"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "syntaxfel: ogiltig aritmetisk operator"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (felsymbol är �%s�)"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "ogiltig aritmetisk bas"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: ogiltigt radantal"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "värdet är för stort för basen"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: uttrycksfel\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: det går inte att komma åt föräldrakatalogen"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "det går inte att återställa fördröjningsfritt läge för fb %d"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr ""
+"det går inte att allokera en ny filbeskrivare för bashindata från fb %d"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input: buffert finns redan för ny fb %d"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: pgrp rör"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "avgrenad pid %d finns i körande jobb %d"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "tar bort stoppat jobb %d med processgrupp %ld"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process: pid %5ld (%s) markerad som fortfarande vid liv"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: ingen sådan pid"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Signal %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Klart"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Stoppad"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Stoppad(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "Kör"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Klart(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Avslut %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Okänd status"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(minnesutskrift skapad) "
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (ak: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "barns setpgid (%ld till %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: pid %ld är inte ett barn till detta skal"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: Ingen uppgift om process %ld"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: jobb %d är stoppat"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: inget sådant jobb"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: jobbet har avslutat"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: jobb %d är redan i bakgrunden"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr "waitchld: slår på WNOHANG för att undvika oändlig blockering"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: rad %d: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (minnesutskrift skapad)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(ak nu: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: getpgrp misslyckades"
+
+#: jobs.c:4447
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: ingen jobbstyrning i bakgrunden"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: linjedisciplin"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "det går inte att sätta terminalprocessgrupp (%d)"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "ingen jobbstyrning i detta skal"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: försäkran misslyckades: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d: försäkran gick fel\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "okänd"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: block på frilista överskrivet"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: anropad med redan frigjort block som argument"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: anropad med oallokerat block som argument"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: underspill upptäckt: mh_nbytes utanför giltigt intervall"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: underspill upptäckt: mh_nbytes utanför giltigt intervall"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: start- och slutstyckesstorlekar skiljer"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: anropat med oallokerat block som argument"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc: underspill upptäckt: mh_nbytes utanför giltigt intervall"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc: underspill upptäckt: mh_nbytes utanför giltigt intervall"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: start- och slutstyckesstorlekar skiljer"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: allokeringstabellen är full med FIND_ALLOC?\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: %p finns redan i tabellen som allokerat?\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: %p finns redan i tabellen som fritt?\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "ogiltig bas"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: okänd värd"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: ogiltig tjänst"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: felaktig specifikation av nätverkssökväg"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "nätverksoperationer stöds inte"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: det går inte att ändra lokal (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: det går inte att ändra lokal (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: det går inte att ändra lokal (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: det går inte att ändra lokal (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "Du har post i $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "Du har ny post i $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "Posten i %s har lästs\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "syntaxfel: aritmetiskt uttryck krävs"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "syntaxfel: oväntat �;�"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "syntaxfel: �((%s))�"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: felaktig instruktionstyp %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr "här-dokument på rad %d avgränsas av filslut (ville ha �%s�)"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr ""
+"make_redirection: omdirigeringsinstruktion �%d� utanför giltigt intervall"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+"shell_getc: shell_input_line_size (%zu) överstiger SIZE_MAX (%lu): raden "
+"avhuggen"
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr "maximalt antal av här-dokument överskridet"
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "oväntat filslut vid sökning efter matchande �%c�"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "oväntat filslut vid sökning efter �]]�"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "syntaxfel i villkorligt uttryck: oväntad symbol �%s�"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "syntaxfel i villkorligt uttryck"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "oväntad symbol �%s�, �)� förväntades"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "�)� förväntades"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "oväntat argument �%s� till villkorlig unär operator"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "oväntat argument till villkorlig unär operator"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "oväntad symbol �%s�, villkorlig binär operator förväntades"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "villkorlig binär operator förväntades"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "oväntat argument �%s� till villkorlig binär operator"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "oväntat argument till villkorlig binär operator"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "oväntad symbol �%c� i villkorligt kommando"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "oväntad symbol �%s� i villkorligt kommando"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "oväntad symbol %d i villkorligt kommando"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "syntaxfel nära den oväntade symbolen �%s�"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "syntaxfel nära �%s�"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "syntaxfel: oväntat filslut"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "syntaxfel"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Använd �%s� för att lämna skalet.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "oväntat filslut när matchande �)� söktes"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "komplettering: funktion �%s� finns inte"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr "programmable_completion: %s: möjlig slinga av omförsök"
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: NULL COMPSPEC"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: felaktig anslutning �%d�"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: ogiltig filbeskrivare"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: NULL-filpekare"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != fileno xtrace fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: �%c�: ogiltigt formateringstecken"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "filbeskrivare utanför giltigt intervall"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: tvetydig omdirigering"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: det går inte att skriva över en existerande fil"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: begränsat: det går inte att omdirigera utdata"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "det går inte att skapa temporärfil för här-dokument: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: det går inte att tilldela fb till variabel"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "/dev/(tcp|udp)/host/port stöds inte utan nätverksfunktion"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "omdirigeringsfel: det går inte att duplicera fb"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "hittade inte /tmp, var god skapa!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp måste vara ett giltigt katalognamn"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr "läget för snygg utskrift ignoreras i interaktiva skal"
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: ogiltig flagga"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "det går sätta uid till %d: effektiv uid %d"
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "det går inte att sätta gid till %d: effektiv gid %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr "kan inte starta felsökaren, felsökningsläge avaktiverat"
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr "%s: är en katalog"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "Jag har inget namn!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, version %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Användning:\t%s [GNU lång flagga] [flagga] ...\n"
+"\t\t%s [GNU lång flagga] [flagga] skriptfil ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "GNU långa flaggor:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Skalflaggor:\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-ilrsD eller -c kommando eller -O shopt_flagga\t\t(bara uppstart)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s eller -o flagga\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr "Skriv �%s -c 'help set'� för mer information om skalflaggor.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr "Skriv �%s -c help� för mer information om inbyggda skalkommandon.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr ""
+"Använd kommandot �bashbug� för att rapportera fel.\n"
+"Skicka synpunkter på översättningen till <tp-sv@listor.tp-sv.se>.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr "bash hemsida: <http://www.gnu.org/software/bash>\n"
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr ""
+"Allmän hjälp i att använda GNU-program: <http://www.gnu.org/gethelp/>\n"
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: ogiltig operation"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Felaktig signal"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Avringd"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Avbruten"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Lämnad"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Otillåten instruktion"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "Brytpunkt/spårningsfälla"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "ABORT-instruktion"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "Emulatorfälla"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Flyttalsfel"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Dödad"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Bussfel"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Segmenteringsfel"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Felaktigt systemanrop"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Brutet rör"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Alarmklocka"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Avslutat"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Viktigt I/O-tillstånd"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Stoppad (signal)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Ã…terupptagen"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Barn dött eller stoppat"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Stoppad (terminalläsning)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Stoppad (terminalskrivning)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "I/O möjligt"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "CPU-gräns"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "Filgräns"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Alarm (virtuell tid)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Alarm (profilering)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Ändrat fönster"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Postlås"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Användarsignal 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Användarsignal 2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "HFT-indata väntar"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "strömavbrott omedelbart förestående"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "systemkrasch omedelbart förestående"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "migrera process till en annan CPU"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "programmeringsfel"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "HFT-övervakningsläge givet"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "HFT-övervakare borttagen"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "HFT-ljudsekvens har avslutat"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "Informationsbegäran"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "Okänd signal nr %d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "felaktig substitution: ingen avslutande �%s� i %s"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: det går inte att tilldela listor till vektormedlemmar"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "det går inte att skapa rör för processubstitution"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "det går inte att skapa barn för processubstitution"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "det går inte att öppna namngivet rör %s för läsning"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "det går inte att öppna namngivet rör %s för skrivning"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "det går inte att duplicera namngivet rör %s som fb %d"
+
+#: subst.c:6213
+msgid "command substitution: ignored null byte in input"
+msgstr "kommandoersättning: ignorerade nollbyte i indata"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "det går inte att skapa rör för kommandosubstitution"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "det går inte att skapa barn för kommandosubstitution"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute: det går inte att duplicera rör som fb 1"
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: ogiltigt variabelnamn för referens"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: felaktig indirekt expansion"
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr "%s: felaktigt variabelnamn"
+
+#: subst.c:7256
+#, c-format
+msgid "%s: parameter not set"
+msgstr "%s: parametern är inte satt"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: parametern tom eller inte satt"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: delstränguttryck < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: felaktig substitution"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: det går inte att tilldela på detta sätt"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+"framtida versioner av skalet kommer att framtvinga evaluering som en "
+"aritmetisk substitution"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "felaktig ersättning: ingen avslutande �`� i %s"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "ingen matchning: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "argument förväntades"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: heltalsuttryck förväntades"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "�)� förväntades"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "�)� förväntades, fann %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: binär operator förväntades"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: unär operator förväntades"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "�]� saknas"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "syntaxfel: oväntat �;�"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "ogiltigt signalnummer"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr "fällhanterare: maximal nivå av fällhanterare överskriden (%d)"
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: felaktigt värde i trap_list[%d]: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps: signalhanterare är SIG_DFL, skickar om %d (%s) till mig "
+"själv"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: felaktig signal %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "fel vid import av funktionsdefinition för �%s�"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "skalnivå (%d) för hög, återställer till 1"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: ingen funktionskontext i aktuellt sammanhang"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: variabeln får inte tilldelas ett värde"
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr "%s: tilldelar ett heltal till en namnreferens"
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: ingen funktionskontext i aktuellt sammanhang"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s har tom exportstr"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "ogiltigt tecken %d i exportstr för %s"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "inget �=� i exportstr för %s"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr ""
+"pop_var_context: huvudet på shell_variables är inte en funktionskontext"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: ingen kontext global_variables"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr ""
+"pop_scope: huvudet på shell_variables är inte en temporär omgivningsräckvidd"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: går inte att öppna som FILE"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: ogiltigt värde för spårningsfilbeskrivare"
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s: kompatibilitetsvärde utanför giltigt intervall"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Copyright © 2018 Free Software Foundation, Inc."
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"Licens GPLv3+: GNU GPL version 3 eller senare <http://gnu.org/licenses/gpl."
+"html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, version %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr ""
+"Detta är fri programvara, du får fritt ändra och vidaredistribuera den."
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "Det finns INGEN GARANTI, så långt lagen tillåter."
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: det går inte att allokera %lu byte (%lu byte allokerade)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: det går inte att allokera %lu byte"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: det går inte att allokera %lu byte (%lu byte allokerade)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: det går inte att allokera %lu byte"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [namn[=värde] ... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] namn [namn ...]"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpvsPVSX] [-m tangentkarta] [-f filnamn] [-q namn] [-u namn] [-r "
+"tangentsekv] [-x tangentsekv:skalkommando] [tangentsekv:readline-funktion "
+"eller readline-kommando]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [skalinbyggd [arg ...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [uttr]"
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]] [-@]] [kat]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] kommando [arg ...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilnrtux] [-p] [namn[=värde] …]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilnrtux] [-p] namn[=värde] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [flagga] namn[=värde] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [arg ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [arg ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f filnamn] [namn ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [arg ...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts flgsträng namn [arg]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a namn] [kommando [argument ...]] [omdirigering ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr ""
+"fc [-e rnamn] [-lnr] [första] [sista] eller fc -s [mnst=ers] [kommando]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [jobbspec]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [jobbspec ...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p sökväg] [-dt] [namn ...]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [mönster ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d avstånd] [n] eller history -anrw [filnamn] eller history -"
+"ps arg [arg...]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [jobbspec ...] eller jobs -x kommando [arg]"
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [jobbspec … | pid …]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobbspec ... eller kill -l "
+"[sigspec]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let arg [arg ...]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a vektor] [-d avgr] [-i text] [-n ntkn] [-N ntkn] [-p prompt] "
+"[-t tidgräns] [-u fb] [namn ...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o flaggnamn] [--] [arg ...]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [namn …]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [namn[=värde] ...] eller export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [namn[=värde] ...] eller readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source filnamn [argument]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". filnamn [argument]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [uttr]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ arg... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[arg] signalspec ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] namn [namn ...]"
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [gräns]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [rättigheter]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-fn] [id …]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [pid …]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for NAMN [in ORD ... ] ; do KOMMANDON; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( utr1; utr2; utr3 )); do KOMMANDON; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select NAMN [in ORD ... ;] do KOMMANDON; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] rör"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case ORD in [MÖNSTER [| MÖNSTER]...) KOMMANDON ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if KOMMANDON; then KOMMANDON; [ elif KOMMANDON; then KOMMANDON; ]... [ else "
+"KOMMANDON; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while KOMMANDON; do KOMMANDON; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until KOMMANDON; do KOMMANDON; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [NAMN] kommando [omdirigeringar]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function namn { KOMMANDON ; } or namn () { KOMMANDON ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ KOMMANDON ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "jobbspec [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( uttryck ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ uttryck ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "variabler - Namn och betydelse av några skalvariabler"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | kat]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [flgnamn ...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v var] format [argument]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o flagga] [-A åtgärd] [-G globmnst] "
+"[-W ordlista]  [-F funktion] [-C kommando] [-X filtermnst] [-P prefix] [-S "
+"suffix] [namn …]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o flagga]  [-A åtgärd] [-G globmnst] [-W "
+"ordlista]  [-F funktion] [-C kommando] [-X filtermnst] [-P prefix] [-S "
+"suffix] [ord]"
+
+#: builtins.c:239
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o flagga] [-DEI] [namn …]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-d avgränsare] [-n antal] [-O start] [-s antal] [-t] [-u fb] [-C "
+"Ã¥teranrop] [-c kvanta] [vektor]"
+
+#: builtins.c:244
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-d avgränsare] [-n antal] [-O start] [-s antal] [-t] [-u fb] [-C "
+"Ã¥teranrop] [-c kvanta] [vektor]"
+
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Definiera eller visa alias.\n"
+"    \n"
+"    Utan argument skriver �alias� listan på alias på den återanvändbara "
+"formen\n"
+"    �alias NAMN=VÄRDE� på standard ut.\n"
+"    \n"
+"    Annars är ett alias definierat för varje NAMN vars VÄRDE är angivet.\n"
+"    Ett avslutande blanktecken i VÄRDE gör att nästa ord undersöks för\n"
+"    aliassubstitution när aliaset expanderas.\n"
+"    \n"
+"    Flaggor:\n"
+"      -p\tskriv alla definierade alias på en återanvändbar form\n"
+"    \n"
+"    Slutstatus:\n"
+"    alias returnerar sant om inte ett NAMN ges för vilket inget alias har\n"
+"    definierats."
+
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Ta bort alla NAMN från listan med definierade alias.\n"
+"    \n"
+"    Flaggor:\n"
+"      -a\tta bort alla aliasdefinitioner\n"
+"    \n"
+"    Returnerar framgång om inte ett NAMN inte är ett existerande alias."
+
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"Sätt Readline-tangentbindningar och -variabler.\n"
+"    \n"
+"    Bind en tangentsekvens till en Readline-funktion eller -makro, eller "
+"sätt\n"
+"    en Readline-variabel.  Syntaxen för argument vid sidan om flaggor är\n"
+"    densamma som den i ~/.inputrc, men måste skickas som ett ensamt "
+"argument:\n"
+"    t.ex., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Flaggor:\n"
+"      -m  tangentkarta   Använt TANGENTKARTA som tangentkarta under detta\n"
+"                         kommando.  Acceptabla tangentkartenamn är emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command och vi-insert.\n"
+"      -l                 Lista namnen på funktioner.\n"
+"      -P                 Lista funktionsnamn och bindningar.\n"
+"      -p                 Lista funktioner och bindningar på ett sätt som "
+"kan\n"
+"                         återanvändas som indata.\n"
+"      -S                 Lista tangentsekvenser som anropar makron och "
+"deras\n"
+"                         värden.\n"
+"      -s                 Lista tangentsekvenser som anropar makron och "
+"deras\n"
+"                         värden på ett sätt som kan återanvändas som "
+"indata.\n"
+"      -V                 Lista variabelnamn och värden\n"
+"      -v                 Lista variabelnamn och värden på ett sätt som kan\n"
+"                         återanvändas som indata.\n"
+"      -q  funktionsnamn  Fråga efter vilka tangenter som anropar den "
+"namngivna\n"
+"                         funktionen\n"
+"      -u  funktionsnamn  Tag bort alla tangenter som är bundna till den\n"
+"                         namngivna funktionen.\n"
+"      -r  tangentsekv    Ta bort bindningen för TANGENTSEKV.\n"
+"      -f  filnamn        Läs tangentbindningar från FILNAMN.\n"
+"      -x  tangentsekv:skalkommando  Gör så att SKALKOMMANDO körs när\n"
+"    \t\t\t\t    TANGENTSEKV skrivs.\n"
+"      -X                 Lista tangentsekvenser bundna med -x och "
+"tillhörande\n"
+"                         kommandon på ett format som kan återanvändas som\n"
+"                         indata.\n"
+"    \n"
+"    Slutstatus:\n"
+"    bind returnerar 0 om inte en okänd flagga ges eller ett fel inträffar."
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Avsluta for-, while- eller until-slinga.\n"
+"    \n"
+"    Avsluta en FOR-, WHILE eller UNTIL-slinga.  Om N anges, avbryt N\n"
+"    omslutande slingor.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returvärdet är 0 förutsatt att N är större eller lika med 1."
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Ã…teruppta for-, while eller until-slinga.\n"
+"    \n"
+"    Återuppta nästa iteration i den omslutande FOR-, WHILE- eller UNTIL-"
+"slingan.\n"
+"    Om N anges, återuppta den N:e omslutande slingan.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Slutstatus är 0 förutsatt att N är större eller lika med 1."
+
+#: builtins.c:354
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Exekvera en i skalet inbyggd funktion.\n"
+"    \n"
+"    Exekvera SKALINBYGGD med argument ARG utan att utföra "
+"kommandouppslagning.\n"
+"    Detta är användbart när du vill implementera om en inbyggd funktion i\n"
+"    skalet som en skalfunktion, men behöver köra den inbyggda funktionen i\n"
+"    skalfunktionen.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar slutstatus från SKALINBYGGD, eller falskt om SKALINBYGGD "
+"inte\n"
+"    är inbyggd i skalet."
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Returnera kontexten för det aktuella funktionsanropet.\n"
+"    \n"
+"    Utan UTTR, returneras �$rad $filnamn�.  Med UTTR, returneras\n"
+"    �$rad $subrutin $filnamn�.  Denna extra information kan användas för\n"
+"    att ge en stackspårning.\n"
+"    \n"
+"    Värdet på UTTR indikerar hur många anropsramar att gå tillbaka före den\n"
+"    aktuella, toppramen är ram 0.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar 0 om inte skalet inte kör en skalfunktion eller UTTR är\n"
+"    ogiltigt."
+
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"Ändra skalets arbetskatalog.\n"
+"    \n"
+"    Ändra den aktuella katalogen till KAT.  Standardvärde på KAT är värdet\n"
+"    på skalvariabeln HOME.\n"
+"    \n"
+"    Variabeln CDPATH definierar sökvägen för katalogen som innehåller KAT.\n"
+"    Alternativa katalognamn i CDPATH separeras av ett kolon (:).  Ett tomt\n"
+"    katalognamn är detsamma som aktuell katalog.  Om KAT börjar med ett\n"
+"    snedstreck (/) används inte CDPATH.\n"
+"    \n"
+"    Om katalogen inte kan hittas, och skalvariabeln �cdable_vars� är satt,\n"
+"    antas ordet vara ett variabelnamn.  Om den variabeln har ett värde\n"
+"    används dess värde för KAT.\n"
+"    \n"
+"    Flaggor:\n"
+"        -L\tframtvinga att symboliska länkar följs: lös upp symboliska\n"
+"    \tKAT efter behandling av instanser av �..�\n"
+"        -P\tanvänd den fysiska katalogstrukturen utan att följa\n"
+"    \tsymboliska länkar: lös upp symboliska länkar i KAT före behandling av\n"
+"    \t�..�\n"
+"        -e\tom flaggan -P ges, och det inte går att avgöra den aktuella\n"
+"    \tkatalogen, returnera då med status skild från noll\n"
+"        -@  på system som stödjer det, presentera en fil med utökade "
+"attribut\n"
+"            som en katalog som innehåller filattributen\n"
+"    \n"
+"    Standardvärde är att följa symboliska länkar, som om �-L� vore angivet.\n"
+"    �..� behandlas genom att ta bort den omedelbart föregående\n"
+"    sökvägskomponenten tillbaka till ett snedstreck eller början av KAT\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar 0 om katalogen är ändrad, och om $PWD satts korrekt om -P\n"
+"    angetts; skilt från noll annars."
+
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"Skriv namnet på den aktuella arbetskatalogen.\n"
+"    \n"
+"    Flaggor:\n"
+"      -L\tskriv värdet på $PWD om det är namnet på den aktuella\n"
+"    \t\tarbetskatalogen\n"
+"      -P\tskriv den fysiska katalogen, utan några symboliska länkar\n"
+"    \n"
+"    Som standard beter sig �pwd� som om �-L� vore angivet.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar 0 om inte en ogiltig flagga anges eller den aktuella "
+"katalogen\n"
+"    inte kan läsas."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Tomt kommando.\n"
+"    \n"
+"    Ingen effekt.  Kommandot gör ingenting.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Lyckas alltid."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Returnerar ett lyckat resultat.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Lyckas alltid."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Returnera ett misslyckat resultat.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Misslyckas alltid."
+
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Exekvera ett enkelt kommando eller visa information om kommandon.\n"
+"    \n"
+"    Kör KOMMANDO med ARGument och utelämna uppslagning av skalfunktioner,\n"
+"    eller visa information om det angivna KOMMANDOt.  Kan användas för att\n"
+"    anropa kommandon på disk när det finns en funktion med samma namn.\n"
+"    \n"
+"    Flaggor:\n"
+"      -p    använd ett standardvärde på PATH som är garanterat att hitta\n"
+"    \t    alla standardverktygen\n"
+"      -v    skriv en beskrivning av KOMMANDO liknande den inbyggda �type�\n"
+"      -V    skriv en mer utförlig beskrivning om varje KOMMANDO\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar slutstatus från KOMMANDO, eller misslyckande om KOMMANDO "
+"inte\n"
+"    finns."
+
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"Sätt variabelvärden och -attribut.\n"
+"    \n"
+"    Deklarera variabler och ge dem attribut.  Om inget NAMN anges, visa\n"
+"    attributen och värdena på alla variabler.\n"
+"    \n"
+"    Flaggor:\n"
+"      -f\tbegränsa åtgärden till att visa funktionsnamn och -definitioner\n"
+"      -F\tbegränsa visandet till endast funktionsnamn (plus radnummer\n"
+"    \t\toch källkodsfil vid felsökning)\n"
+"      -g\tskapa globala variabler när använt i en skalfunktion, ignoreras\n"
+"    \t\ti övrigt\n"
+"      -p\tvisa attributen och värden på varje NAMN\n"
+"    \n"
+"    Flaggor som sätter attribut:\n"
+"      -a\tför att göra NAMN till indexerade vektorer (om det stöds)\n"
+"      -A\tför att göra NAMN till associativa vektorer (om det stöds)\n"
+"      -i\tför att ge NAMN attributet �heltal�\n"
+"      -l\tför att konvertera värdet av varje NAMN till gemena vid "
+"tilldelning\n"
+"      -n\tgör NAMN till en referens till variabeln som namnges som värde\n"
+"      -r\tför att göra NAMN endast läsbart\n"
+"      -t\tför att ge NAMN attributet �spåra�\n"
+"      -u\tför att konvertera värdet av varje NAMN till versaler vid "
+"tilldelning\n"
+"      -x\tför att exportera NAMN\n"
+"    \n"
+"    Användning av �+� istället för �-� slår av det angivna attributet.\n"
+"    \n"
+"    För variabler med attributet heltal utförs aritmetisk beräkning (se\n"
+"    kommandot �let�) när variabeln tilldelas ett värde.\n"
+"    \n"
+"    Vid användning i en funktion gör �declare� NAMN lokala, som med "
+"kommandot\n"
+"    �local�.  Flaggan �-g� åsidosätter detta beteende.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte en ogiltig flagga ges eller ett fel vid\n"
+"    variabeltilldelning inträffar."
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"Sätt variabelvärden och -attribut.\n"
+"    \n"
+"    En synonym för �declare�.  Se �help declare�."
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Definiera lokala variabler.\n"
+"    \n"
+"    Skapa en lokal variabel kallad NAMN, och ge den VÄRDE.  FLAGGA kan\n"
+"    vara alla flaggor som accepteras av �declare�.\n"
+"    \n"
+"    Lokala variabler kan endast användas i en funktion; de är synliga "
+"endast\n"
+"    för funktionen de definieras i och dess barn.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte en ogiltig flagga ges, ett fel vid\n"
+"    variabeltilldelning inträffar eller skalet inte exekverar en funktion."
+
+#: builtins.c:557
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Skriv argument på standard ut.\n"
+"    \n"
+"    Visa ARGumenten, separerade av ensamma blanktecken och följda av en\n"
+"    nyrad, på standard ut.\n"
+"    \n"
+"    Flaggor:\n"
+"      -n\tlägg inte till en nyrad\n"
+"      -e\taktivera tolkning av nedanstående specialsekvenser\n"
+"      -E\tundertryck uttryckligen tolkning av specialsekvenser\n"
+"    \n"
+"    �echo� tolkar följande bakstrecksekvenser:\n"
+"      \\a\talarm (klocka)\n"
+"      \\b\tbacksteg\n"
+"      \\c\tundertryck följande utdata\n"
+"      \\e\tescape-tecknet\n"
+"      \\E\tescape-tecknet\n"
+"      \\f\tsidmatning\n"
+"      \\n\tnyrad\n"
+"      \\r\tvagnretur\n"
+"      \\t\thorisontell tabulator\n"
+"      \\v\tvertikal tabulator\n"
+"      \\\\\tbakstreck\n"
+"      \\0nnn\ttecknet vars ASCII-kod är NNN (oktalt).  NNN kan vara\n"
+"    \t\t0 till 3 oktala siffror\n"
+"      \\xHH\tdet åttabitarstecken vars värde är HH (hexadecimalt).  HH\n"
+"    \t\tkan vara en eller två hexadecimala siffror\n"
+"      \\uHHHH\tdet Unicode-tecken vars värde är det hexadeimala värdet "
+"HHHH.\n"
+"    \t\tHHHH kan vara en till fyra hexadecimala siffror.\n"
+"      \\UHHHHHHHH det Unicode-tecken vars värde är det hexadecimala värdet\n"
+"    \t\tHHHHHHHH.  HHHHHHHH kan vara en till åtta hexadecimala siffror.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte ett skrivfel inträffar."
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Skriv argument på standard ut.\n"
+"    \n"
+"    Visa ARGumenten på standard ut följt av en nyrad.\n"
+"    \n"
+"    Flaggor:\n"
+"      -n\tlägg inte till en nyrad\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte ett skrivfel inträffar."
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"Aktivera och avaktivera inbyggda kommandon i skalet.\n"
+"    \n"
+"    Aktiverar och avaktiverar inbyggda skalkommandon.  Avaktivering låter\n"
+"    dig exekvera diskkommandon som har samma namn som ett inbyggt\n"
+"    skalkommando utan att använda en fullständig sökväg.\n"
+"    \n"
+"    Flaggor:\n"
+"      -a\tskriv en lista av inbyggda kommando och visa om de är\n"
+"    \taktiverade eller ej\n"
+"      -n\tavaktivera varje NAMN eller visa en lista av avaktiverade\n"
+"    \tkommandon\n"
+"      -p\tskriv listan av inbyggda kommandon på en återanvändbar\n"
+"    \tform\n"
+"      -s\tskriv endast namnen på Posix �special�-inbyggda\n"
+"    \n"
+"    Flaggor som styr dynamisk inläsning:\n"
+"      -f\tLäs in inbyggt NAMN från en delad objektfil FILNAMN\n"
+"      -d\tTa bort en inbyggd inläst med -f\n"
+"    \n"
+"    Utan flaggor aktiveras varje NAMN.\n"
+"    \n"
+"    För att använda den �test� som finns i sökvägen istället för den i\n"
+"    skalet inbyggda versionen, skriv �enable -n test�.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte NAMN inte är inbyggd i skalet eller ett fel\n"
+"    inträffar."
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Exekvera argument som ett skalkommando.\n"
+"    \n"
+"    Kombinera ARGument till en enda sträng, och använd resultatet som "
+"indata\n"
+"    till skalet och exekvera de resulterande kommandona.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar slutstatus av kommandot eller framgång om kommandot är tomt."
+
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"Tolka flaggargument.\n"
+"    \n"
+"    Getopts används av skalprocedurer för att tolka positionsparametrar\n"
+"    som flaggor.\n"
+"    \n"
+"    FLGSTRÄNG innehåller de flaggtecken som skall kännas igen.  Om ett\n"
+"    tecken följs av ett kolon förväntas flaggan ha ett argument, som\n"
+"    skall separeras från den med blanktecken.\n"
+"    \n"
+"    Varje gång det anropas kommer getopts placera nästa flagga i skal-\n"
+"    variabeln $namn, initiera namnet om det inte redan finns, och\n"
+"    index på nästa argument läggas i skalvariabeln OPTIND.  OPTIND\n"
+"    initieras till 1 varje gång skalet eller ett skalskript startas.  När\n"
+"    en flagga behöver ett argument placerar getopts det argumentet i\n"
+"    skalvariabeln OPTARG.\n"
+"    \n"
+"    getopts rapporterar fel på ett av två sätt.  Om det första tecknet\n"
+"    i OPTSTRING är ett kolon använder getopts tyst felrapportering.  I\n"
+"    detta läge skrivs inget felmeddelande ut.  Om en ogiltig flagga ses\n"
+"    placerar getopts det funna flaggtecknet i OPTARG.  Om ett nödvändigt\n"
+"    argument inte finns placerar getopts ett �:� i NAMN och sätter OPTARG\n"
+"    till det funna flaggtecknet.  Om getopts inte är i tyst läge och en\n"
+"    felaktig flagga upptäcks placerar getopts �?� i NAMN och tar bort\n"
+"    OPTARG.  Om ett nödvändigt argument inte hittas placeras ett �?� i\n"
+"    NAMN, OPTARG tas bort och ett felmeddelande skrivs.\n"
+"    \n"
+"    Om skalvariabeln OPTERR har värdet 0 avaktiverar getopts utskriften\n"
+"    av felmeddelanden, även om det första tecknet i FLGSTRÄNG inte är ett\n"
+"    kolon.  OPTERR har värdet 1 som standard.\n"
+"    \n"
+"    Getopts tolkar normalt positionsparametrarna ($0 - $9), men om fler\n"
+"    argument ges tolkas de istället.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om en flagga hittas, misslyckas om slutet av\n"
+"    flaggorna nås eller ett fel inträffar."
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"Ersätt skalet med det givna kommandot.\n"
+"    \n"
+"    Exekvera KOMMANDO genom att ersätta detta skal med det angivna "
+"programmet.\n"
+"    ARGUMENT blir argument till KOMMANDO.  Om KOMMANDO inte anges kommer\n"
+"    eventuella omdirigeringar att gälla för det aktuella skalet.\n"
+"    \n"
+"    Flaggor:\n"
+"      -a namn\tskicka NAMN som det nollte argumentet till KOMMANDO\n"
+"      -c\texekvera KOMMANDO med en tom miljö\n"
+"      -l\tplacera ett streck i det nollte argumentet till KOMMANDO\n"
+"    \n"
+"    Om kommandot inte kan exekveras avslutar ett ickeinteraktivt skal, om\n"
+"    inte skalflaggan �execfail� är satt.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte KOMMANDO inte finns eller ett fel vid\n"
+"    omdirigering inträffar."
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Avsluta skalet.\n"
+"    \n"
+"    Avslutar skalet med statusen N.  Om N utelämnas är slutstatusen den\n"
+"    hos det sist körda kommandot."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Avsluta ett inloggningsskal.\n"
+"    \n"
+"    Avslutar ett inloggningsskal med slutstatus N.  Returnerar ett fel om\n"
+"    det inte körs i ett inloggningsskal."
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"Visa eller kör kommandon från historielistan.\n"
+"    \n"
+"    fc används för att lista eller redigera och köra om kommandon från\n"
+"    historielistan.  FÖRSTA och SISTA kan vara tal som anger intervallet,\n"
+"    eller så kan FÖRSTA vara en sträng, som betyder det senaste kommandot\n"
+"    som börjar med den strängen.\n"
+"    \n"
+"    Flaggor:\n"
+"      -e RNAMN\tvälj vilken redigerar som skall användas.  Standard är\n"
+"    \t\tFCEDIT, sedan EDITOR, sedan vi\n"
+"      -l \tlista rader istället för att redigera\n"
+"      -n\tutelämna radnummer vid listningen\n"
+"      -r\treversera ordningen på raderna (nyaste listas först)\n"
+"    \n"
+"    Med formatet �fc -s [mnst=ers ...] [kommando]� körs KOMMANDO om efter\n"
+"    att substitutionen GAMMALT=NYTT har utförts.\n"
+"    \n"
+"    Ett användbart alias att använda med detta är r=\"fc -s\", så att "
+"skriva\n"
+"    �r cc� kör senaste kommandot som börjar med �cc� och att skriva �r� kör\n"
+"    om senaste kommandot.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång eller status på exekverat kommando, skilt från noll\n"
+"    om ett fel inträffar."
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Flytta ett jobb till förgrunden.\n"
+"    \n"
+"    Placera jobbet som identifieras av JOBBSPEC i förgrunden, och gör det\n"
+"    till det aktuella jobbet.  Om ingen JOBBSPEC finns används skalets\n"
+"    begrep om det aktuella jobbet.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Status på kommandot som placerades i förgrunden, eller misslyckande om\n"
+"    ett fel inträffar."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Flytta jobb till bakgrunden.\n"
+"    \n"
+"    Placera jobben som identifieras av varje JOBBSPEC i bakgrunden som om "
+"de\n"
+"    hade startats med �&�.  Om ingen JOBBSPEC finns används skalets begrepp\n"
+"    om det aktuella jobbet.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte jobbstyrning inte är aktiverat eller ett "
+"fel\n"
+"    inträffar."
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"Kom ihåg eller visa programlägen.\n"
+"    \n"
+"    Bestäm och kom ihåg den fullständiga sökvägen till varje kommando NAMN.\n"
+"    Om inget argument ges visas information om kommandon som finns i "
+"minnet.\n"
+"    \n"
+"    Flaggor:\n"
+"      -d\tglöm platsen i minnet för varje NAMN\n"
+"      -l\tvisa i ett format som kan återanvändas som indata\n"
+"      -p sökväg använd SÖKVÄG som den fullständiga sökvägen till NAMN\n"
+"      -r\tglöm alla platser i minnet\n"
+"      -t\tskriv platsen i minnet för varje NAMN, med NAMN före\n"
+"    \t\tvarje motsvarande plats om flera NAMN ges\n"
+"    Argument:\n"
+"      NAMN\tVarje NAMN söks efter i $PATH och läggs till i listan\n"
+"    \t\tav kommandon i minnet.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte NAMN inte hittas eller en ogiltig flagga ges."
+
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Visa information om inbyggda kommandon.\n"
+"    \n"
+"    Visar korta sammanfattningar om inbyggda kommandon.  Om MÖNSTER anges\n"
+"    ges detaljerad hjälp om alla kommandon som matchar MÖNSTER, annars "
+"skrivs\n"
+"    listan med hjälpämnen.\n"
+"    \n"
+"    Flaggor:\n"
+"      -d\tvisa en kort beskrivning för varje ämne\n"
+"      -m\tvisa användning i låtsas-mansideformat\n"
+"      -s\tvisa endast ett kort användningsformat för varje ämne som\n"
+"    \t\tmatchar MÖNSTER\n"
+"    \n"
+"    Argument:\n"
+"      MÖNSTER\tMönster som anger hjälpämnen\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte MÖNSTER inte finns eller en ogiltig flagga "
+"ges."
+
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Visa eller hantera historielistan.\n"
+"    \n"
+"    Visa historielistan med radnummer, inled varje modifierad post med en\n"
+"    �*�.  Ett argument N listar endast de N senaste posterna.\n"
+"    \n"
+"    Flaggor:\n"
+"      -c\tnollställ historielistan genom att ta bort alla poster\n"
+"      -d avstånd\tta bort historieposten på position AVSTÅND.  Negativa\n"
+"    \t\tavstånd räknar baklänges från slutet av historielistan  \n"
+"    \n"
+"      -a\tlägg till historierader från denna session till historiefilen\n"
+"      -n\tläs alla historierader som inte redan lästs från historiefilen\n"
+"    \t\toch lägg till dem till historielistan\n"
+"      -r\tläs historiefilen och lägg till innehållet till historielistan\n"
+"      -w\tskriv den aktuella historien till historiefilen\n"
+"    \n"
+"      -p\tutför historieexpansion på varje ARG och visa resultatet utan\n"
+"    \t\tatt lagra det i historielistan\n"
+"      -s\tlägg till ARG till historielistan som en ensam post\n"
+"    \n"
+"    Om FILNAMN anges används det som historiefil.  Annars, om HISTFILE har\n"
+"    ett värde används det, annars ~/.bash_history.\n"
+"    \n"
+"    Om variabeln HISTTIMEFORMAT är satt och inte tom används dess värde som\n"
+"    en formatsträng till strftime(3) för att skriva tidsstämplar "
+"tillhörande\n"
+"    varje visad historiepost.  Inga tidsstämplar skrivs annars.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte en ogiltig flagga ges eller ett fel "
+"inträffar."
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"Visa status på jobb.\n"
+"    \n"
+"    Lista de aktiva jobben.  JOBBSPEC begränsar utdata till det jobbet.\n"
+"    Utan flaggor visas status på alla aktiva jobb.\n"
+"    \n"
+"    Flaggor:\n"
+"      -l\tlistar process-id:n utöver den normala informationen\n"
+"      -n\tlistar endast processer som har ändrat status sedan senaste\n"
+"                notifiering\n"
+"      -p\tlistar endast process-id:n\n"
+"      -r\tbegränsar utdata till körande jobb\n"
+"      -s\tbegränsar utdata till stoppade jobb\n"
+"    \n"
+"    Om -x anges körs KOMMANDO efter alla jobbspecifikationer som förekommer\n"
+"    i ARG har ersatts med process-id:t för det jobbets processgruppledare.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte en ogiltig flagga ges eller ett fel "
+"inträffar.\n"
+"    Om -x används returneras slutstatus från KOMMANDO."
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"Ta bort jobb från det aktuella skalet.\n"
+"    \n"
+"    Tar bort varje JOBBSPEC-argument från tabellen över aktiva jobb.  Utan\n"
+"    någon JOBBSPEC använder skalet sitt begrepp om det aktuella jobbet.\n"
+"    \n"
+"    Flaggor:\n"
+"      -a\tta bort alla jobb om JOBBSPEC inte anges\n"
+"      -h\tmärk varje JOBBSPEC så att SIGHUP inte skickas till jobbet om\n"
+"    \t\tskalet tar emot en SIGHUP\n"
+"      -r\ttar bara bort körande jobb\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte en ogiltig flagga eller JOBBSPEC ges."
+
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Skicka en signal till ett jobb.\n"
+"    \n"
+"    Skicka processerna som identifieras av PID eller JOBBSPEC signalerna "
+"som\n"
+"    namnges av SIGSPEC eller SIGNUM.  Om varken SIGSPEC eller SIGNUM är\n"
+"    angivna antas SIGTERM.\n"
+"    \n"
+"    Flaggor:\n"
+"      -s sig\tSIG är ett signalnamn\n"
+"      -n sig\tSIG är ett signalnummer\n"
+"      -l\tlista signalnamnen.  Om argument följer �-l� antas de vara\n"
+"    \t\tsignalnummer som namn skall listas för\n"
+"      -L\tsynonym för -l\n"
+"    \n"
+"    Kill är inbyggt i skalet av två skäl: det tillåter att jobb-id:n "
+"används\n"
+"    istället för process-id:n, och det tillåter processer att dödas om "
+"gränsen\n"
+"    för hur många processer du får skapa har nåtts.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte en ogiltig flagga angivits eller ett fel\n"
+"    inträffar."
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"Evaluera aritmetiska uttryck.\n"
+"    \n"
+"    Evaluera varje ARG som ett aritmetiskt uttryck.  Evaluering görs i "
+"heltal\n"
+"    med fix bredd utan kontroll av spill, fast division med 0 fångas och\n"
+"    flaggas som ett fel.  Följande lista över operatorer är grupperad i\n"
+"    nivåer av operatorer med samma precedens.  Nivåerna är listade i "
+"ordning\n"
+"    med sjunkande precedens.\n"
+"    \n"
+"    \tid++, id--\tpostinkrementering av variabel, postdekrementering\n"
+"    \t++id, --id\tpreinkrementering av variabel, predekrementering\n"
+"    \t-, +\t\tunärt minus, plus\n"
+"    \t!, ~\t\tlogisk och bitvis negering\n"
+"    \t**\t\texponentiering\n"
+"    \t*, /, %\t\tmultiplikation, division, rest\n"
+"    \t+, -\t\taddition, subtraktion\n"
+"    \t<<, >>\t\tvänster och höger bitvisa skift\n"
+"    \t<=, >=, <, >\tjämförelse\n"
+"    \t==, !=\t\tlikhet, olikhet\n"
+"    \t&\t\tbitvis OCH\n"
+"    \t^\t\tbitvis EXKLUSIVT ELLER\n"
+"    \t|\t\tbitvis ELLER\n"
+"    \t&&\t\tlogiskt OCH\n"
+"    \t||\t\tlogiskt ELLER\n"
+"    \tuttr ? uttr : uttr\n"
+"    \t\t\tvillkorlig operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\ttilldelning\n"
+"    \n"
+"    Skalvariabler är tillåtna som operander.  namnet på variablerna ersätts\n"
+"    med deras värde (omformat till ett heltal med fix bredd) inom ett\n"
+"    uttryck.  Variablerna behöver inte ha sina heltalsattribut påslagna för\n"
+"    att användas i ett uttryck.\n"
+"    \n"
+"    Operatorer beräknas i precedensordning.  Deluttryck i parenteser "
+"beräknas\n"
+"    först och kan åsidosätta precedensreglerna ovan.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Om det sista ARG beräknas till 0, returnerar let 1; let returnerar 0 "
+"annars."
+
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"Läs en rad från standard in och dela upp den i fält.\n"
+"    \n"
+"    Läser en ensam rad från standard in, eller från filbeskrivare FB om\n"
+"    flaggan -u ges.  Raden delas upp i fält som vid orduppdelning, och "
+"första\n"
+"    ordet tilldelas det första NAMNet, andra ordet till det andra NAMNet, "
+"och\n"
+"    så vidare, med eventuella återstående ord tilldelade till det sista\n"
+"    NAMNet.  Endast tecknen som finns i $IFS används som ordavgränsare.\n"
+"    \n"
+"    Om inga NAMN anges, lagras den inlästa raden i variabeln REPLY.\n"
+"    \n"
+"    Flaggor:\n"
+"      -a vektor\ttilldela de inlästa orden till sekventiella index i "
+"vektor-\n"
+"    \t\tvariabeln VEKTOR, med start från noll\n"
+"      -d avgr\tfortsätt tills det första tecknet i AVGR lästs, istället för\n"
+"    \t\tnyrad\n"
+"      -e\tanvänd Readline för att få in raden\n"
+"      -i text\tAnvänd TEXT som starttext för Readline\n"
+"      -n ntkn\treturnera efter att ha läst NTKN tecken istället för att\n"
+"    \t\tvänta på en nyrad, men ta hänsyn till en avgränsare om färre\n"
+"    \t\tän NTKN tecken lästs före avgränsaren\n"
+"      -N ntkn\treturnera endast efter att ha läst exakt NTKN tecken, om "
+"inte\n"
+"    \t\tfilslut påträffades eller tidsgränsen överskreds, ignorera\n"
+"    \t\talla avgränsare\n"
+"      -p prompt\tskriv ut strängen PROMPT utan en avslutande nyrad före\n"
+"    \t\tförsök att läsa\n"
+"      -r\ttillåt inte bakstreck att skydda några tecken\n"
+"      -s\teka inte indata som kommer från terminalen\n"
+"      -t tidgräns\tsluta vänta och returnera misslyckande om inte en\n"
+"    \t\tkomplett rad lästs inom TIDSGRÄNS sekunder.  Värdet på variabeln\n"
+"    \t\tTMOUT är standardvärdet på tidsgränsen.  TIDSGRÄNS kan vara ett\n"
+"    \t\tdecimaltal.  Om TIDSGRÄNS är 0 returnerar read direkt, utan\n"
+"                att försöka läsa några data, och returnerar lyckad status "
+"bara\n"
+"\t\tom det finns indata tillgängligt på den angivna filbeskrivaren.\n"
+"                Slutstatus är större än 128 om tidsgränsen överskrids\n"
+"      -u fb\tläs från filbeskrivare FB istället för standard in\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returkoden är noll om inte filslut nås, läsningens tidsgräns överskrids\n"
+"    (då den är större än 128), ett fel vid variabeltilldelning inträffar "
+"eller\n"
+"    en ogiltig filbeskrivare ges som argument till -u."
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"Returnera från en skalfunktion.\n"
+"    \n"
+"    Får en funktion eller ett källinläst skript att avsluta med returvärdet\n"
+"    som anges av N.  Om N utelämnas är returstatus den hos det sista\n"
+"    kommandot som körts i funktionen eller skriptet.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar N, eller misslyckande om skalet inte kör en funktion eller\n"
+"    skript."
+
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"Sätt eller ta bort satta värden på skalflaggor och positionsparametrar.\n"
+"    \n"
+"    Ändra värdet på skalattribut och positionsparametrar, eller visa namnen\n"
+"    och värdena på skalvariabler.\n"
+"    \n"
+"    Flaggor:\n"
+"      -a  Markera variabler om ändras eller skapas för export.\n"
+"      -b  Rapportera om avslutade jobb omedelbart.\n"
+"      -e  Avsluta omedelbart om ett kommando avslutar med nollskild status.\n"
+"      -f  Avaktivera filnamnsgenerering (globbing).\n"
+"      -h  Kom ihåg platsen för kommandon när de slås upp.\n"
+"      -k  Alla tilldelningsargument placeras i miljön för ett kommando, "
+"inte\n"
+"          bara de som föregår kommandonamnet.\n"
+"      -m  Jobbstyrning är aktiverat.\n"
+"      -n  Läs kommandon men exekvera dem inte.\n"
+"      -o flaggnamn\n"
+"          Sätt variabeln som motsvarar flaggnamn:\n"
+"              allexport    samma som -a\n"
+"              braceexpand  samma som -B\n"
+"              emacs        använd radredigeringsgränssnitt i emacsstil\n"
+"              errexit      samma som -e\n"
+"              errtrace     samma som -E\n"
+"              functrace    samma som -T\n"
+"              hashall      samma som -h\n"
+"              histexpand   samma som -H\n"
+"              history      aktivera kommandohistoria\n"
+"              ignoreeof    skalet kommer inte avsluta vid läsning av "
+"filslut\n"
+"              interactive-comments\n"
+"                           tillåt kommentarer att förekomma i interaktiva\n"
+"                           kommandon\n"
+"              keyword      samma som -k\n"
+"              monitor      samma som -m\n"
+"              noclobber    samma som -C\n"
+"              noexec       samma som -n\n"
+"              noglob       samma som -f\n"
+"              nolog        accepteras men ignoreras för närvarande\n"
+"              notify       samma som -b\n"
+"              nounset      samma som -u\n"
+"              onecmd       samma som -t\n"
+"              physical     samma som -P\n"
+"              pipefail     returvärdet av ett rör är status på det sista\n"
+"                           kommandot som avslutas med en status skild från\n"
+"                           noll, eller noll om inget kommando avslutas med\n"
+"                           en status skild från noll\n"
+"              posix        ändra beteendet på bash där standardbeteendet\n"
+"                           skiljer sig från Posixstandarden till att stämma\n"
+"                           med standarden\n"
+"              privileged   samma som -p\n"
+"              verbose      samma som -v\n"
+"              vi           använd radredigeringsgränssnitt i vi-stil\n"
+"              xtrace       samma som -x\n"
+"      -p  Slås på när den verkliga och effektiva användar-id:n inte stämmer\n"
+"          överens.  Avaktiverar bearbetning av $ENV-filen och import av\n"
+"          skalfunktioner.  Att slå av denna flagga får den effektiva uid "
+"och\n"
+"          gid att sättas till den verkliga uid och gid.\n"
+"      -t  Avsluta efter att ha läst och exekverat ett kommando.\n"
+"      -u  Behandla osatta variabler som fel vid substitution.\n"
+"      -v  Skriv skalindatarader allteftersom de läses.\n"
+"      -x  Skriv kommandon och deras argument allteftersom de körs.\n"
+"      -B  skalet kommer utföra klammerexpansion\n"
+"      -C  Om satt tillåts inte existerande normala filer att skrivas över\n"
+"          av omdirigering av utdata.\n"
+"      -E  Om satt ärvs ERR-fällan av skalfunktioner.\n"
+"      -H  Aktivera historiesubstitution i !-stil.  Denna flagga är på som\n"
+"          standard när skalet är interaktivt.\n"
+"      -P  Om satt löses inte symboliska länkar upp när kommandon såsom cd\n"
+"          körs som ändrar aktuell katalog.\n"
+"      -T  Om satt ärvs DEBUG och RETURN-fällorna av skalfunktioner.\n"
+"      --  Tilldela eventuella återstående argument till "
+"positionsparametrar.\n"
+"          Om det inte finns några återstående argument nollställs\n"
+"          positionsparametrarna.\n"
+"      -   Tilldela eventuella återstående argument till "
+"positionsparametrar.\n"
+"          Flaggorna -x och -v slås av.\n"
+"    \n"
+"    Användning av + istället för - får dessa flaggor att slås av.  "
+"Flaggorna\n"
+"    kan även användas vid uppstart av skalet.  Den aktuella uppsättningen\n"
+"    flaggor finns i $-.  De återstående n ARGumenten är positionsparametrar\n"
+"    och tilldelas, i ordning, till $1, $2, .. $n.  Om inga ARGument ges\n"
+"    skrivs alla skalvariabler ut.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte en ogiltig flagga ges."
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"Ta bort värden och attribut på skalvariabler och -funktioner.\n"
+"    \n"
+"    Tag för varje NAMN bort motsvarande variabel eller funktion.\n"
+"    \n"
+"    Flaggor:\n"
+"      -f\tbehandla varje NAMN som en skalfunktion\n"
+"      -v\tbehandla varje NAMN som en skalvariabel\n"
+"      -n\tbehandla varje NAMN som en namnreferens tar bort värdet på\n"
+"                variabeln själv istället för variabeln den refererar\n"
+"    \n"
+"    Utan flaggor försöker unset först att ta bort en variabel, och, om det\n"
+"    misslyckas, försöker den ta bort en funktion.\n"
+"    \n"
+"    Några variabler kan inte tas bort, se även �readonly�.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte en ogiltig flagga ges eller NAMN endast är\n"
+"    läsbart."
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Sätt exportattribut på skalvariabler.\n"
+"    \n"
+"    Markerar varje NAMN för automatisk export till miljön för senare\n"
+"    exekverade kommandon.  Om VÄRDE anges tilldelas VÄRDE före export.\n"
+"    \n"
+"    Flaggor:\n"
+"      -f\treferera till skalfunktioner\n"
+"      -n\tta bort exportegenskapen från varje NAMN\n"
+"      -p\tvisa en lista av alla exporterade variabler och funktioner\n"
+"    \n"
+"    Ett argument �--� avslutar vidare flaggbearbetning.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte en ogiltig flagga ges eller NAMN är ogiltigt."
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Markera skalvariabler som oföränderliga.\n"
+"    \n"
+"    Markera varje NAMN som oföränderligt.  Värdena på dessa NAMN kan inte\n"
+"    ändras av senare tilldelningar.  Om VÄRDE anges tilldelas VÄRDE före\n"
+"    variabeln markeras oföränderlig.\n"
+"    \n"
+"    Flaggor:\n"
+"      -a\treferera till indexerade vektorvariabler\n"
+"      -A\trefererar till associativa vektorvariabler\n"
+"      -f\treferera till skalfunktioner\n"
+"      -p\tvisa en lista över alla oföränderliga variabler eller funktioner,\n"
+"                beroende på huruvida flaggan -f ges\n"
+"    \n"
+"    Ett argument �--� avslutar vidare flaggbearbetning.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte en ogiltig flagga ges eller NAMN är ogiltigt."
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"Skifta positionsparametrar.\n"
+"    \n"
+"    Byt namn på positionsparametrarna $N+1,$N+2 ... till $1,$2 ...  Om N "
+"inte\n"
+"    anges antas det vara 1.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte N är negativt eller större än $#."
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Exekvera kommandon från en fil i det aktuella skalet.\n"
+"    \n"
+"    Läs och exekvera kommandon från FILNAMN i det aktuella skalet.  "
+"Posterna\n"
+"    i $PATH används för att hitta katalogen som innehåller FILNAMN.  Om\n"
+"    något ARGUMENT ges blir de positionsparametrar när FILNAMN körs.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar status på det sista kommandot som körs i FILNAMN, misslyckas\n"
+"    om FILNAMN inte kan läsas."
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Suspendera skalexekvering.\n"
+"    \n"
+"    Suspendera exekveringen av detta skal tills det får en SIGCONT-signal.\n"
+"    Om det inte framtvingas kan inloggningsskal inte suspenderas.\n"
+"    \n"
+"    Flaggor:\n"
+"      -f\tframtvinga suspendering, även om skalet är ett inloggningsskal\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte jobbstyrning inte är aktiverat eller ett "
+"fel\n"
+"    inträffar."
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"Beräkna villkorligt uttryck.\n"
+"    \n"
+"    Avslutar med en status på 0 (sant) eller 1 (falskt) beroende på\n"
+"    beräkningen av UTTR.  Uttryck kan vara unära eller binära.  Unära\n"
+"    uttryck är ofta till för att undersöka status för en fil.  Det finns\n"
+"    strängoperatorer och numeriska jämförelseoperatorer också.\n"
+"    \n"
+"    Beteendet hos test beror på antalet argument.  Läs bash-manualsidan\n"
+"    för den fullständiga specifikationen.\n"
+"    \n"
+"    Filoperatorer:\n"
+"    \n"
+"      -a FIL         Sant om filen finns.\n"
+"      -b FIL         Sant om filen är en blockspecialfil.\n"
+"      -c FIL         Sant om filen är en teckenspecialfil.\n"
+"      -d FIL         Sant om filen är en katalog.\n"
+"      -e FIL         Sant om filen finns.\n"
+"      -f FIL         Sant om filen finns, och är en normal fil.\n"
+"      -g FIL         Sant om filen är sätt-grupp-id.\n"
+"      -h FIL         Sant om filen är en symbolisk länk.\n"
+"      -L FIL         Sant om filen är en symbolisk länk.\n"
+"      -k FIL         Sant om filen har �fastbiten� satt.\n"
+"      -p FIL         Sant om filen är ett namngivet rör.\n"
+"      -r FIL         Sant om filen kan läsas av dig.\n"
+"      -s FIL         Sant om filen finns och inte är tom.\n"
+"      -S FIL         Sant om filen är ett uttag (socket).\n"
+"      -t FB          Sant om FB är öppnad mot en terminal.\n"
+"      -u FIL         Sant om filen är sätt-användar-id.\n"
+"      -w FIL         Sant om filen är skrivbar av dig.\n"
+"      -x FIL         Sant om filen är exekverbar av dig.\n"
+"      -O FIL         Sant om filen ägs av din verksamma användare.\n"
+"      -G FIL         Sant om filen ägs av din verksamma grupp.\n"
+"      -N FIL         Sant om filen har ändrats sedan den sist lästes.\n"
+"    \n"
+"      FIL1 -nt FIL2  Sant om fil1 är nyare än fil2 (enligt\n"
+"                     modifieringsdatum).\n"
+"    \n"
+"      FIL1 -ot FIL2  Sant om fil1 är äldre än fil2.\n"
+"    \n"
+"      FIL1 -ef FIL2  Sant om fil1 är en hård länk till fil2.\n"
+"    \n"
+"    Strängoperatorer:\n"
+"    \n"
+"      -z STRÄNG      Sant om strängen är tom.\n"
+"    \n"
+"      -n STRÄNG\n"
+"         STRÄNG      Sant om strängen inte är tom.\n"
+"    \n"
+"      STRÄNG1 = STRÄNG2\n"
+"                     Sant om strängarna är lika.\n"
+"      STRÄNG1 != STRÄNG2\n"
+"                     Sant om strängarna inte är lika.\n"
+"      STRÄNG1 < STRÄNG2\n"
+"                     Sant om STRÄNG1 kommer före STRÄNG2 lexikografiskt.\n"
+"      STRÄNG1 > STRÄNG2\n"
+"                     Sant om STRÄNG1 kommer efter STRÄNG2 lexikografiskt.\n"
+"    \n"
+"    Andra operatorer:\n"
+"    \n"
+"      -o FLAGGA      Sant om skalflaggan FLAGGA är aktiv.\n"
+"      -v VAR         Sant om skalvariabeln VAR är satt.\n"
+"      -R VAR         Sant om skalvariabeln VAR är satt och är en "
+"namnreferens.\n"
+"      ! UTTR         Sant om uttr är falskt.\n"
+"      UTTR1 -a UTTR2 Sant om både uttr1 OCH uttr2 är sanna.\n"
+"      UTTR1 -o UTTR2 Sant om antingen uttr1 ELLER uttr2 är sanna.\n"
+"    \n"
+"      arg1 OP arg2   Aritmetiska test.  OP är en av -eq, -ne,\n"
+"                     -lt, -le, -gt eller -ge.\n"
+"    \n"
+"    Aritmetiska binära operatorer returnerar sant om ARG1 är lika-med,\n"
+"    inte-lika-med, mindre-än, mindre-än-eller-lika-med, större-än eller\n"
+"    större-än-eller-lika-med ARG2.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om UTTR beräknas till sant.  Misslyckas ifall UTTR\n"
+"    beräknas till falskt eller ett ogiltigt argument ges."
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Beräkna villkorligt uttryck.\n"
+"    \n"
+"    Detta är en synonym till det inbyggda �test�, men det sista argumentet\n"
+"    måste vara en bokstavlig �]�, för att matcha den inledande �[�."
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Visa processtider.\n"
+"    \n"
+"    Skriver ut den sammanlagda användar- och systemtiden för skalet och "
+"alla\n"
+"    dess barnprocesser.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Lyckas alltid."
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"Fånga signaler och andra händelser.\n"
+"    \n"
+"    Definierar och aktiverar hanterare som skall köras när skalet tar emot\n"
+"    signaler eller andra omständigheter.\n"
+"    \n"
+"    ARG är ett kommando som skall läsas och exekveras när skalet tar emot\n"
+"    signalen SIGNALSPEC.  Om ARG inte anges (och en ensam SIGNALSPEC ges)\n"
+"    eller �-� återställs varje angiven signal till sitt originalvärde.  Om\n"
+"    ARG är den tomma strängen ignoreras varje SIGNALSPEC av skalet och av\n"
+"    kommandon det startar.\n"
+"    \n"
+"    Om en SIGNALSPEC är EXIT (0) exekveras ARG vid avslut från skalet.  Om\n"
+"    en SIGNALSPEC är DEBUG exekveras ARG före varje enkelt kommando.  Om\n"
+"    en SIGNALSPEC är RETURN exekveras ARG varje gång en skalfunktion eller\n"
+"    ett skript kört med den inbyggda . eller source avslutar körningen.  En\n"
+"    SIGNALSPEC ERR betyder att köra ARG varje gång ett kommandos felstatus\n"
+"    skulle fått skalet att avsluta om flaggan -e vore satt.\n"
+"    \n"
+"    Om inga argument ges skriver trap listan av kommandon som hör till "
+"varje\n"
+"    signal.\n"
+"    \n"
+"    Flaggor:\n"
+"      -l\tskriv en lista av signalnamn och deras motsvarande nummer\n"
+"      -p\tvisa trap-kommandona associerade med varje SIGNALSPEC\n"
+"    \n"
+"    Varje SIGNALSPEC är antingen ett signalnamn i <signal.h> eller ett\n"
+"    signalnummer.  Signalnamn är skiftlägesokänsliga och SIG-prefixet är\n"
+"    frivilligt.  En signal kan skickas till skalet med �kill -signal $$�.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte en SIGSPEC är ogiltig eller en ogiltig "
+"flagga\n"
+"    ges."
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"Visa information om kommandotyper.\n"
+"    \n"
+"    Indikera för varje NAMN hur det skulle tolkats om det användes som ett\n"
+"    kommandonamn.\n"
+"    \n"
+"    Flaggor:\n"
+"      -a\tvisa alla platser som innehåller ett körbart program med namnet\n"
+"    \t\tNAMN, inklusive alias, inbyggda och funktioner, om och endast\n"
+"    \t\tom flaggan �-p� inte också används\n"
+"      -f\tutelämna uppslagning av skalfunktioner\n"
+"      -P\tframtvinga en PATH-sökning för varje NAMN, även om det är ett\n"
+"    \t\talias, inbyggt eller funktion, och returnera namnet på diskfilen\n"
+"    \t\tsom skulle blivit exekverad\n"
+"      -p\treturnerar antingen namnet på diskfilen som skulle exekverats,\n"
+"    \t\teller ingenting om �type -t NAMN� inte skulle returnerat �file�.\n"
+"      -t\tskriv ut ett ensamt ord som är ett av �alias�, �keyword�,\n"
+"    \t\t�function�, �builtin�, �file� eller ��, om NAMN är ett alias, ett\n"
+"    \t\treserverat ord i skalet, en skalfunktion, inbyggt i skalet, en\n"
+"    \t\tdiskfil respektive inte finns\n"
+"    \n"
+"    Argument:\n"
+"      NAMN\tKommandonamn som skall tolkas.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om alla NAMNen finns, misslyckas om något inte finns."
+
+#: builtins.c:1431
+#, fuzzy
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Modifiera skalresursgränser.\n"
+"    \n"
+"    Ger kontroll över resurserna som är tillgängliga till skalet och "
+"processer\n"
+"    det skapar, på system som möjliggör sådan styrning.\n"
+"    \n"
+"    Flaggor:\n"
+"      -S\tanvänd den �mjuka� resursgränsen\n"
+"      -H\tanvänd den �hårda� resursgränsen\n"
+"      -a\talla aktuella gränser rapporteras\n"
+"      -b\tstorleken på uttagsbuffertar\n"
+"      -c\tden maximala storleken på minnesutskrifter som skapas\n"
+"      -d\tden maximala storleken på en process datasegment\n"
+"      -e\tden maximala schemaläggningsprioriteten (�nice�)\n"
+"      -f\tden maximala storleken på filer som skrivs av skalet och dess\n"
+"        \tbarn\n"
+"      -i\tdet maximala antalet väntande signaler\n"
+"      -k\tdet maximala antalet kqueue:r allokerade för denna process\n"
+"      -l\tden maximala storleken en process kan låsa i minnet\n"
+"      -m\tden maximala residenta mängdstorleken\n"
+"      -n\tdet maximala antalet öppna filbeskrivare\n"
+"      -p\trörbuffertstorleken\n"
+"      -q\tdet maximala antalet byte i POSIX-meddelandeköer\n"
+"      -r\tden maximala prioriteten för realtidsschemaläggning\n"
+"      -s\tden maximala stackstorleken\n"
+"      -t\tden maximala mängden cpu-tid i sekunder\n"
+"      -u\tdet maximala antalet användarprocesser\n"
+"      -v\tstorleken på det virtuella minnet\n"
+"      -x\tdet maximala antalet fillås\n"
+"      -P        det maximala antalet pseudoterminaler\n"
+"      -T        det maximala antalet trådar\n"
+"    \n"
+"    Alla flaggor är inte tillgängliga på alla plattformar.\n"
+"    \n"
+"    Om GRÄNS anges är det ett nytt värde för den specificerade resursen; de\n"
+"    speciella GRÄNS-värdena �soft�, �hard� och �unlimited� står för den\n"
+"    aktuella mjuka gränsen, den aktuella hårda gränsen respektive ingen "
+"gräns.\n"
+"    Annars skrivs det aktuella värdet på den specificerade resursen.  Om\n"
+"    ingen flagga ges antas -f.\n"
+"    \n"
+"    Värden är i 1024-bytesteg, utom för -t som är i sekunder, -p som är i "
+"steg\n"
+"    på 512 byte och -u som är ett antal processer utan någon skalning.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte en ogiltig flagga anges eller ett fel "
+"inträffar."
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"Visa eller sätt filrättighetsmask.\n"
+"    \n"
+"    Sätter användarens filskapningsmask till RÄTTIGHETER.  Om RÄTTIGHETER\n"
+"    utelämnas skrivs det aktuella värdet på masken.\n"
+"    \n"
+"    Om RÄTTIGHETER börjar med en siffra tolkas det som ett oktalt tal, "
+"annars\n"
+"    är det en symbolisk rättighetssträng som den som tas av chmod(1).\n"
+"    \n"
+"    Flaggor:\n"
+"      -p\tom RÄTTIGHETER utelämnas, skriv ut i en form som kan\n"
+"        \tåteranvändas som indata\n"
+"      -S\tgör utmatningen symbolisk, annars används oktala tal\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte RÄTTIGHETER är ogiltig eller en ogiltig "
+"flagga\n"
+"    ges."
+
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"Vänta på att jobb blir färdiga och returnera slutstatus.\n"
+"    \n"
+"    Väntar på varje process som identifieras av ett ID, som kan vara en\n"
+"    process-id eller en jobbspecifikation, och rapportera dess\n"
+"    avslutningsstatus.  Om ID inte ges, vänta på alla nu körande\n"
+"    barnprocesser, och returstatus är noll.  Om ID är en "
+"jobbspecifikation, \n"
+"    vänta på alla processer i det jobbets rör.\n"
+"    \n"
+"    Om flaggan -n ges väntar på nästa jobb att avsluta och returnera dess\n"
+"    slutstatus.\n"
+"    \n"
+"    Om flaggan -f anges, och jobbstyrning är aktiverat, väntar på att det\n"
+"    angivna ID:t avslutas, istället för att vänta på att det ändrar status.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar status på den sista ID, misslyckas ifall ID är ogiltig\n"
+"    eller en ogiltig flagga ges."
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"Vänta på att en process blir färdig och returnerar slutstatus.\n"
+"    \n"
+"    Väntar på varje process som identifieras av en PID rapporterar dess\n"
+"    slutstatus.  Om PID inte ges, väntar på alla nu körande barnprocesser,\n"
+"    och returstatus är noll.  PID måste vara en process-id.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar status på den sista PID, misslyckas ifall PID är ogiltig\n"
+"    eller en ogiltig flagga ges."
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Exekvera kommandon för varje medlem i en lista.\n"
+"    \n"
+"    �for�-slingan exekverar en sekvens av kommandon för varje medlem i en\n"
+"    lista av element.  Om �in ORD ...;� inte är med antas 'in \"$@\"'.  För\n"
+"    varje element i ORD sätts NAMN till det elementet, och KOMMANDON\n"
+"    exekveras.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar status för det sist exekverade kommandot."
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Aritmetisk for-slinga.\n"
+"    \n"
+"    Likvärdigt med\n"
+"    \t(( UTR1 ))\n"
+"    \twhile (( UTR2 )); do\n"
+"    \t\tKOMMANDON\n"
+"    \t\t(( UTR3 ))\n"
+"    \tdone\n"
+"    UTR1, UTR2 och UTR3 är aritmetiska uttryck.  Om något uttryck utelämnas\n"
+"    beter det sig som om det beräknas till 1.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar statusen från det sist exekverade kommandot."
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Välj ord från en lista och exekvera kommandon.\n"
+"    \n"
+"    ORD expanderas och genererar en lista med ord.  Mängden av\n"
+"    expanderade ord skrivs på standard fel, vart och ett föregånget\n"
+"    av ett tal.  Om `in ORD' inte är med antas 'in \"$@\"'.  Prompten\n"
+"    PS3 skrivs sedan och en rad läses från standard in.  OM raden\n"
+"    består av numret motsvarande en av de visade orden sätts NAMN\n"
+"    till det ordet.  Om raden är tom visas ORD och prompten igen.\n"
+"    Om filslut läses avslutar kommandot.  Alla andra värden får NAMN\n"
+"    att bli satt till tomt.  Den inlästa raden sparas i variabeln\n"
+"    REPLY.  KOMMANDON exekveras efter varje val tills ett\n"
+"    break-kommando exekveras.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar statusen från det sist exekverade kommandot."
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"Rapportera tiden som används av rörets exekvering.\n"
+"    \n"
+"    Exekvera RÖR och skriv en sammanfattning av den verkliga tiden,\n"
+"    användar-CPU-tiden och system-CPU-tiden som använts för att exekvera\n"
+"    RÖRet när det avslutar.\n"
+"    \n"
+"    Flaggor:\n"
+"      -p\tskriv tidssammanfattningen i det portabla Posix-formatet\n"
+"    \n"
+"    Värdet på variabeln TIMEFORMAT används som utmatningsformat.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returstatusen är returstatusen från RÖR."
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Exekvera kommandon baserat på mönstermatchning.\n"
+"    \n"
+"    Välj att exekvera KOMMANDON baserat på om ORD matchar MÖNSTER.  Ett\n"
+"    �|� används för att separera flera mönster.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar statusen från det sist exekverade kommandot."
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Exekvera kommandon baserat på ett villkor.\n"
+"    \n"
+"    Listan �if KOMMANDON� exekveras.  Om dess slutstatus är noll så "
+"exekveras\n"
+"    listan �then KOMMANDON�.  Annars exekveras varje lista �elif KOMMANDON�\n"
+"    i tur och ordning, och om dess slutstatus är noll exekveras motsvarande\n"
+"    lista �then KOMMANDON� och if-kommandot avslutar.  Annars exekveras "
+"listan\n"
+"    �else KOMMANDON� om den finns.  Slutstatus av hela konstruktionen är\n"
+"    slutstatusen på det sist exekverade kommandot, eller noll om inget\n"
+"    villkor returnerade sant.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar status från det sist exekverade kommandot."
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Exekvera kommandon så länge ett test lyckas.\n"
+"    \n"
+"    Expandera och exekvera KOMMANDON så länge det sista kommandot i\n"
+"    �while�-KOMMANDONa har en slutstatus på noll.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar statusen från det sist exekverade kommandot."
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Exekvera kommandon så länge ett test inte lyckas.\n"
+"    \n"
+"    Expandera och exekvera KOMMANDON så länge det sista kommandot i\n"
+"    �until�-KOMMANDONa har en slutstatus som inte är noll.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar statusen från det sist exekverade kommandot."
+
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"Skapa en ko-process med namnet NAMN.\n"
+"    \n"
+"    Kör KOMMANDO asynkront, med standard ut och standard in för kommandot\n"
+"    ansluta via ett rör till filbeskrivare tilldelade indexen 0 och 1 i\n"
+"    en vektorvariabel NAMN i skalet som kör.  Standardvärde på NAMN är\n"
+"    �COPROC�.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Kommandot coproc returnerar slutstatusen 0."
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"Definiera en skalfunktion.\n"
+"    \n"
+"    Skapa en skalfunktion med namnet NAMN.  När den anropas som ett enkelt\n"
+"    kommando kör NAMN KOMMANDON i det anropande skalets kontext.  När NAMN\n"
+"    anropas skickas argumenten till funktionen som $1...$n och funktionens\n"
+"    namn finns i $FUNCNAME.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte NAMN endast är läsbart."
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Gruppera kommandon som en enhet.\n"
+"    \n"
+"    Kör ett antal kommandon i en grupp.  Detta är ett sätt att omdirigera\n"
+"    en hel mängd kommandon.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar statusen från det sist exekverade kommandot."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"Återuppta jobb i förgrunden.\n"
+"    \n"
+"    Likvärdigt med JOBBSPEC-argumentet till kommandot �fg�.  Återuppta\n"
+"    ett stoppat eller bakgrundsjobb.  JOBBSPEC kan ange antingen ett\n"
+"    jobbnamn eller ett jobbnummer.  Om JOBBSPEC följs av ett �&� placeras\n"
+"    jobbet i bakgrunden, som om jobbspecifikationen hade givits som ett\n"
+"    argument till �bg�.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar statusen på det återupptagna jobbet."
+
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Beräkna aritmetiskt uttryck.\n"
+"    \n"
+"    UTTRYCKet beräknas enligt reglerna för aritmetisk beräkning.\n"
+"    Likvärdigt med �let UTTRYCK�.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar 1 om UTTRYCK beräknas till 0, returnerar 0 annars."
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"Kör ett villkorligt kommando.\n"
+"    \n"
+"    Returnerar en status av 0 eller 1 beroende på evalueringen av det\n"
+"    villkorliga uttrycket UTTRYCK.  Uttryck är sammansatta av samma "
+"primitiver\n"
+"    som används av det inbyggda �test�, och kan kombineras med följande\n"
+"    operatorer:\n"
+"    \n"
+"      ( UTTRYCK )\tReturnerar värdet på UTTRYCK\n"
+"      ! UTTRYCK\t\tSant om UTTRYCK är falskt, annars falskt\n"
+"      UTTR1 && UTTR2\tSant om både UTTR1 och UTTR2 är sanna, annars falskt\n"
+"      UTTR1 || UTTR2\tSant om antingen UTTR1 eller UTTR2 är sant, annars\n"
+"                        falskt\n"
+"    \n"
+"    När operatorerna �==� och �!=� används används strängen till höger om\n"
+"    som ett mönster och mönstermatchning utförs.  När operatorn �=~� "
+"används\n"
+"    matchas strängen till höger om operatorn som ett reguljärt uttryck.\n"
+"    \n"
+"    Operatorerna && och || beräknar inte UTTR2 om UTTR1 är tillräckligt för\n"
+"    att avgöra uttryckets värde.\n"
+"    \n"
+"    Slutstatus:\n"
+"    0 eller 1 beroende på värdet av UTTRYCK."
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"Vanliga skalvariablers namn och användning.\n"
+"    \n"
+"    BASH_VERSION\tVersionsinformation för denna Bash.\n"
+"    CDPATH\tEn kolonseparerad lista av kataloger att söka i efter\n"
+"    \t\tkataloger givna som argument till �cd�.\n"
+"    GLOBIGNORE\tEn kolonseparerad lista av mönster som beskriver filnamn\n"
+"    \t\tatt ignorera vid söknamnsexpansion.\n"
+"    HISTFILE\tNamnet på filen där din kommandohistorik sparas.\n"
+"    HISTFILESIZE\tDet maximala antalet rader denna fil kan innehålla.\n"
+"    HISTSIZE\tDet maximala antalet historierade ett körande skal kan\n"
+"    \t\tkomma åt.\n"
+"    HOME\tDen fullständiga sökvägen till din inloggningskatalog.\n"
+"    HOSTNAME\tNamnet på den aktuella värden.\n"
+"    HOSTTYPE\tTyp av CPU denna version av Bash kör under.\n"
+"    IGNOREEOF\tStyr skalets åtgärd när det tar emot ett filslutstecken\n"
+"    \t\tsom enda indata.  Om den är satt är dess värde det antal\n"
+"    \t\tfilslutstecken som kan ses i rad på en tom rad innan\n"
+"    \t\tskalet avslutar (10 som standard).  När den inte är satt\n"
+"    \t\tbetyder filslut slut på indata.\n"
+"    MACHTYPE\tEn sträng som beskriver det aktuella systemet Bash kör på.\n"
+"    MAILCHECK\tHur ofta, i sekunder, Bash tittar efter ny post.\n"
+"    MAILPATH\tEn kolonseparerad lista av filnamn som Bash tittar efter\n"
+"    \t\tny post i.\n"
+"    OSTYPE\tDen version av Unix denna version av Bash kör på.\n"
+"    PATH\tEn kolonseparerad lista av kataloger att söka i när\n"
+"    \t\tkommandon skall letas upp.\n"
+"    PROMPT_COMMAND\tEtt kommando att köra före utskriften av varje\n"
+"    \t\tprimär prompt.\n"
+"    PS1\t\tDen primära promptsträngen.\n"
+"    PS2\t\tDen sekundära promptsträngen.\n"
+"    PWD\t\tDet fullständiga söknamnet till den aktuella katalogen.\n"
+"    SHELLOPTS\tEn kolonseparerad lista av aktiverade skalflaggor.\n"
+"    TERM\tNamnet på den aktuella terminaltypen.\n"
+"    TIMEFORMAT\tUtmatningsformatet för tidsstatistik som visas av det\n"
+"    \t\treserverade ordet �time�.\n"
+"    auto_resume\tOm inte tomt betyder att ett kommandoord som förekommer\n"
+"    \t\tensamt på en rad först letas efter i listan av för tillfället\n"
+"    \t\tstoppade jobb.  Om det hittas där läggs det jobbet i\n"
+"    \t\tförgrunden.  Ett värde av �exact� betyder att kommandoordet\n"
+"    \t\texakt måste stämma med ett kommando i listan över stoppade\n"
+"    \t\tjobb.  Ett värde av �substring� betyder att kommandoordet\n"
+"    \t\tmåste stämma med en delsträng av jobbet.  Alla andra värden\n"
+"    \t\tbetyder att kommandot måste vara ett prefix av ett stoppat\n"
+"    \t\tjobb.\n"
+"    histchars\tTecken som styr historieexpansion och snabbsubstitution.\n"
+"    \t\tDet första tecknet är tecknet för historiesubstitution,\n"
+"    \t\tvanligen �!�.  Det andra tecknet är tecknet för �snabb\n"
+"    \t\tsubstitution�, vanligen �^�.  Det tredje är tecknet för\n"
+"    \t\t�historiekommentar�, vanligen �#�.\n"
+"    HISTIGNORE\tEn kolonseparerad lista av mönster som används för att\n"
+"    \t\tbestämma vilka kommandon som skall sparas i historielistan.\n"
+
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Lägg till kataloger på stacken.\n"
+"    \n"
+"    Lägger till en katalog till toppen av katalogstacken, eller roterar\n"
+"    stacken, och gör den nya toppen av stacken till den aktuella\n"
+"    arbetskatalogen.  Utan argument byts de två toppkatalogerna.\n"
+"    \n"
+"    Flaggor:\n"
+"      -n\tUndertryck det normala bytet av katalog när kataloger\n"
+"    \t\tläggs till på stacken, så att endast stacken ändras.\n"
+"    \n"
+"    Argument:\n"
+"      +N\tRotera stacken så att den N:e katalogen (räknat från\n"
+"    \t\tvänster i listan som visas av �dirs�, med start på noll)\n"
+"    \t\thamnar på toppen.\n"
+"    \n"
+"      -N\tRotera stacken så att den N:e katalogen (räknat från\n"
+"    \t\thöger i listan som visas av �dirs�, med start på noll)\n"
+"    \t\thamnar på toppen.\n"
+"    \n"
+"      kat\tLägger till KAT till toppen av katalogstacken, och gör\n"
+"    \t\tden till den nya aktuella arbetskatalogen.\n"
+"    \n"
+"    Den inbyggda �dirs� visar katalogstacken.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte ett ogiltigt argument ges eller bytet av\n"
+"    katalog misslyckas."
+
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Ta bort kataloger från stacken.\n"
+"    \n"
+"    Tar bort poster från katalogstacken.  Utan argument tas toppkatalogen\n"
+"    bort från stacken, och byter till den nya toppkatalogen.\n"
+"    \n"
+"    Flaggor:\n"
+"      -n\tUndertryck det normala bytet av katalog när kataloger\n"
+"    \t\ttas bort från stacken, så att endast stacken ändras.\n"
+"    \n"
+"    Argument:\n"
+"      +N\tTar bort den N:e katalogen räknat från vänster i listan som\n"
+"    \t\tvisas av �dirs�, med start på noll.  Till exempel: �popd +0�\n"
+"    \t\ttar bort den första katalogen, �popd +1� den andra.\n"
+"    \n"
+"      -N\tTar bort den N:e katalogen räknat från höger i listan som\n"
+"    \t\tvisas av �dirs�, med start på noll.  Till exempel: �popd -0�\n"
+"    \t\ttar bort den sista katalogen, �popd -1� den näst sista.\n"
+"    \n"
+"    Den inbyggda �dirs� visar katalogstacken.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte ett ogiltigt argument ges eller bytet av\n"
+"    katalog misslyckas."
+
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Visa katalogstacken.\n"
+"    \n"
+"    Visa listan av kataloger i minnet för närvarande.  Kataloger kommer\n"
+"    in på listan med kommandot �pushd�.  Du kan komma tillbaka upp genom\n"
+"    listan med kommandot �popd�.\n"
+"    \n"
+"    Flaggor:\n"
+"      -c\tnollställer katalogstacken genom att ta bort alla element\n"
+"      -l\tskriv inte ut versioner med tildeprefix av kataloger som\n"
+"    \t\tär relativa till din hemkatalog\n"
+"      -p\tskriv katalogstacken med en post per rad\n"
+"      -v\tskriv katalogstacken med en post per rad föregångna av\n"
+"    \t\tdess position i stacken\n"
+"    \n"
+"    Argument:\n"
+"      +N\tVisar den N:e posten räknat från vänster i listan som visas\n"
+"    \t\tav dirs när det anropas utan flaggor, med början från noll.\n"
+"    \n"
+"      -N\tVisar den N:e posten räknat från höger i listan som visas\n"
+"    \t\tav dirs när det anropas utan flaggor, med början från noll.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte en ogiltig flagga ges eller ett fel "
+"inträffar."
+
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"Slå på och av skalflaggor.\n"
+"    \n"
+"    Ändra inställningen av varje flagga FLGNAMN.  Utan några flaggargument\n"
+"    lista varje angivet FLGNAMN, eller alla skalflaggor med om inga FLGNAMN\n"
+"    anges, en indikation av huruvida var och en är satt eller inte.\n"
+"    \n"
+"    Flaggor:\n"
+"      -o\tbegränsa FLGNAMN till de som kan användas med �set -o�\n"
+"      -p\tskriv varje skalflagga med en indikation på dess status\n"
+"      -q\tutelämna utmatning\n"
+"      -s\taktivera (slå på) varje FLGNAMN\n"
+"      -u\tavaktivera (slå av) varje FLGNAMN\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om FLGNAMN är aktiverat, misslyckas om en ogiltig\n"
+"    flagga ges eller FLGNAMN är avaktiverat."
+
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"Formatera och skriv ARGUMENT styrda av FORMAT.\n"
+"    \n"
+"    Flaggor:\n"
+"      -v var\ttilldela utdata till skalvariabeln VAR istället för att\n"
+"    \t\tskriva den på standard ut\n"
+"    \n"
+"    FORMAT är en teckensträng som innehåller tre sorters objekt: vanliga\n"
+"    tecken, som helt enkelt kopieras till standard ut, teckenstyrsekvenser\n"
+"    som konverteras och kopieras till standard ut och "
+"formatspecifikationer,\n"
+"    där var och en medför utskrift av det nästföljande argumentet.\n"
+"    \n"
+"    Förutom de standardformatspecifikationer som beskrivs a printf(1),\n"
+"    tolkar printf:\n"
+"    \n"
+"      %b\texpandera bakstrecksstyrsekvenser i motsvarande argument\n"
+"      %q\tcitera argumentet på ett sätt som kan återanvändas som\n"
+"    \t\tindata till ett skal\n"
+"      %(fmt)T   skriv ut datum-/tidsträngen som blir resultatet av att\n"
+"                använda FMT som en formatsträng till strftime(3)\n"
+"    \n"
+"    Formatet återanvänds vid behov för att konsumera alla argument.  Om\n"
+"    det finns färre argument än formatet behöver beter sig överskjutande\n"
+"    formatspecifikationer som om värdet noll eller den tomma strängen,\n"
+"    det som passar, hade angivits.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte en ogiltig flagga ges eller ett skriv-\n"
+"    eller tilldelningsfel inträffar."
+
+#: builtins.c:1971
+#, fuzzy
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Ange hur argument skal kompletteras av Readline.\n"
+"    \n"
+"    För varje NAMN, ange hur argument skall kompletteras.  Om inga flaggor\n"
+"    är givna skrivs nuvarande kompletteringsspecifikationer ut på ett sätt\n"
+"    som gör att de kan användas som indata.\n"
+"    \n"
+"    Flaggor:\n"
+"      -p\tskriv existerande kompletteringsspecifikationer på ett\n"
+"                återanvändbart format\n"
+"      -r\tta bort en kompletteringsspecifikation för varje NAMN eller\n"
+"                om inga NAMN är givna, alla kompletteringsinformationer\n"
+"      -D\tanvänd kompletteringarna och åtgärderna som standard för\n"
+"                kommandon utan någon särskild komplettering definierad\n"
+"      -E\tanvänd kompletteringarna och åtgärderna för �tomma� kommandon\n"
+"                — kompletteringar som försöks på en tom rad\n"
+"    \n"
+"    När komplettering försöker göras används åtgärderna i den ordning de\n"
+"    versala flaggorna är uppräknade ovan.  Om flera flaggor anges har\n"
+"    flaggan -D företräde framför -E, och båda har företräde framför -I.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte en ogiltig flagga ges eller ett fel "
+"inträffar."
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Visa möjliga kompletteringar beroende på flaggorna.\n"
+"    \n"
+"    Avsett att användas inifrån en skalfunktion för att generera möjliga\n"
+"    kompletteringar.  Om det valfria argumentet ORD är givet genereras\n"
+"    matchningar av ORD.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte en ogiltig flagga ges eller ett fel "
+"inträffar."
+
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"Modifiera eller visa kompletteringsflaggor.\n"
+"    \n"
+"    Modifiera kompletteringsflaggorna för varje NAMN, eller, om inga NAMN "
+"är\n"
+"    givna, den komplettering som för närvarande körs.  Om ingen FLAGGA är\n"
+"    given skrivs kompletteringsflaggorna för varje NAMN eller den aktuella\n"
+"    kompletteringsspecifikationen.\n"
+"    \n"
+"    Flaggor:\n"
+"    \t-o flagga\tSätt kompletteringsflagga FLAGGA för varje NAMN\n"
+"    \t-D\t\tÄndra flaggorna för �standard� kommandokomplettering\n"
+"    \t-E\t\tÄndra flaggorna för den �tomma� kommandokompletteringen\n"
+"    \t-I\t\tÄndra flaggorna för komplettering av den första flaggan.\n"
+"    \n"
+"    Genom att använda �+o� istället för �-o� slås den angivna flaggan av.\n"
+"    \n"
+"    Argument:\n"
+"    \n"
+"    Varje NAMN refererar till ett kommando för vilket en kompletterings-\n"
+"    specifikation måste ha definierats tidigare med det inbyggda "
+"�complete�.\n"
+"    Om inget NAMN ges måste compopt anropas av en funktion som just nu\n"
+"    genererar kompletteringar, och flaggorna för den just nu exekverande\n"
+"    kompletteringsgeneratorn modifieras.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte en ogiltig flagga ges eller NAMN inte har\n"
+"    någon kompletteringsspecifikation definierad."
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"Läs rader från standard in till en indexerad vektorvariabel.\n"
+"    \n"
+"    Läs rader från standard in till den indexerade vektorvariabeln VEKTOR,\n"
+"    eller från filbeskrivaren FB om flaggan -u ges.  Variabeln MAPFILE är\n"
+"    standard för VEKTOR.\n"
+"    \n"
+"    Flaggor:\n"
+"      -d avgr   Använd AVGR för att avsluta rader, istället för nyrad\n"
+"      -n antal\tKopiera högs ANTAL rader.  Om ANTAL är 0 kopieras alla "
+"rader\n"
+"      -O start\tBörja tilldela till VEKTOR vid index START.  Standardindex "
+"är 0\n"
+"      -s antal \tSläng de första ANTAL inlästa raderna\n"
+"      -t\tTa bort en avslutande AVGR från varje inläst rad (nyrad som\n"
+"                standard)\n"
+"      -u fb\tLäs rader från filbeskrivare FB istället för standard in.\n"
+"      -C återanrop\tBeräkna ÅTERANROP för varje KVANTA rader som läses.\n"
+"      -c kvanta Ange antalet rader att läsa mellan varje anrop av\n"
+"    \t\tÃ…TERANROP.\n"
+"    \n"
+"    Argument:\n"
+"      VEKTOR\tNamn på vektorvariabel att använda för fildata\n"
+"    \n"
+"    Om -C ges utan -c är standardkvanta 5000.  När ÅTERANROP evalueras får\n"
+"    den indexet på nästa vektorelement att tilldelas och raden att "
+"tilldelas\n"
+"    till det elementet som extra argument.\n"
+"    \n"
+"    Om det inte ges någon specificerad start kommer mapfile nollställa "
+"VEKTOR\n"
+"    före tilldelning till den.\n"
+"    \n"
+"    Slutstatus:\n"
+"    Returnerar framgång om inte en ogiltig flagga ges eller VEKTOR är\n"
+"    oföränderlig eller inte en indexerad vektor."
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Läs rader från en fil till en vektorvariabel.\n"
+"    \n"
+"    En synonym till �mapfile�."
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "Returnera kontexten för det aktuella subrutinanropet.\n"
+#~ "    \n"
+#~ "    Utan UTTR, returnerar "
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process: process %5ld (%s) i the_pipeline"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "Okänd signal nr "
diff --git a/po/tr.gmo b/po/tr.gmo
new file mode 100644
index 0000000..4955862
--- /dev/null
+++ b/po/tr.gmo
diff --git a/po/tr.po b/po/tr.po
new file mode 100644
index 0000000..cb0e0cb
--- /dev/null
+++ b/po/tr.po
@@ -0,0 +1,6425 @@
+# translation of bash-4.2.po to Turkish
+# Copyright (C) 2006 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+#
+# Nilgün Belma Bugüner <nilgun@buguner.name.tr>, 2006.
+# Volkan Gezer <vlkngzr@gmail.com>, 2013, 2014, 2017.
+msgid ""
+msgstr ""
+"Project-Id-Version: bash 4.4\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2017-05-05 11:49+0100\n"
+"Last-Translator: Volkan Gezer <volkangezer@gmail.com>\n"
+"Language-Team: Turkish <gnu-tr-u12a@lists.sourceforge.net>\n"
+"Language: tr\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"X-Generator: Lokalize 2.0\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "hatalı dizi indisi"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr "%s: removing nameref niteliği kaldırılıyor"
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: indisli dizi, ilişkisel diziye dönüştürülemez"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: geçersiz ilişkisel dizi anahtarı"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: sayısal olmayan indise atama yapılamaz"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr "%s: %s: ilişkisel bir dizi ataması yapılırken indis kullanılmalıdır"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: oluşturulamıyor: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr "bash_execute_unix_command: komut için kısayol bulunamıyor"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: boÅŸluk olmayan ilk karakter `\"' deÄŸil"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "%2$s içinde kapatan `%1$c' yok"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: ikinokta imi eksik"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "`%s': kısayol değiştirilemiyor"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr "destek genişletme: %s için bellek ayrılamıyor"
+
+#: braces.c:406
+#, fuzzy, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr "destek genişletme: %d öge için bellek ayrılamıyor"
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr "destek genişletme: `%s' için bellek ayrılamıyor"
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "`%s': geçersiz takma isim"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "satır düzenleme etkin değil"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "`%s': kısayol ismi geçersiz"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: okunamıyor: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "`%s': iÅŸlev ismi bilinmiyor"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s için bir kısayol atanmamış.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s bunun üzerinden çağrılabilir: "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "`%s': kısayol değiştirilemiyor"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "döngü sayısı"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "sadece bir `for', `while' veya `until' döngüsünde anlamlı"
+
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Geçerli alt yordam çağrısının bağlamını döndürür.\n"
+"    \n"
+"    İFADE olmadan, \"$satır $dosyaadı\" döndürür.  İFADE ile "
+"kullanıldığında\n"
+"    \"$satır $altyordam $dosyaadı\" döndürür; bu ek bilgi bir yığın izi "
+"saÄŸlamak\n"
+"    için kullanılabilir.\n"
+"    \n"
+"    İFADE değeri, geçerli çerçeveden önce kaç tane çerçeve çağrılacağını\n"
+"    belirtir. Üst çerçeve 0. çerçevedir.    \n"
+"    Çıkış Durumu:\n"
+"    İFADE geçersiz olmadığı ve bir kabuk işlevi çalıştırmadığı durumda 0 "
+"döndürür."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "HOME atanmamış"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "çok fazla argüman"
+
+#: builtins/cd.def:342
+msgid "null directory"
+msgstr "boÅŸ dizini"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "OLDPWD boÅŸ"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "satır %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "uyarı: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: kullanım: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: seçenek bir argüman gerektirir"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: sayısal argüman gerekli"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s:yok"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: seçenek geçersiz"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: seçenek ismi geçersiz"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "`%s': geçerli bir belirteç değil"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "geçersiz sekizli sayı"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "geçersiz onaltılık sayı"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "geçersiz sayı"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: sinyal belirtimi geçersiz"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "`%s': geçerli bir iş belirtimi veya süreç numarası değil"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: salt okunur deÄŸiÅŸken"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s aralık dışı"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "argüman"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s aralık dışı"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: böyle bir iş yok"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: iÅŸ denetimi yok"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "iÅŸ denetimi yok"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: kısıtlı"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "kısıtlı"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: bir kabuk yerleÅŸiÄŸi deÄŸil"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "yazma hatası: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "uçbirim nitelikleri ayarlanırken hata: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "uçbirim nitelikleri alınırken hata: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: geçerli dizin alınırken hata: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: iÅŸ belirtimi belirsiz"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr "bu sürümde yardım kullanılamıyor"
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s:unset yapılamaz: %s salt okunur"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: unset yapılamaz"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: eylem adı geçersiz"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: tamamlama belirtimi yok"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "uyarı: -F seçeneği umduğunuz gibi çalışmayabilir"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "uyarı: -C seçeneği umduğunuz gibi çalışmayabilir"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "şuan tamamlama işlevi çalıştırılmıyor"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "sadece bir işlevde kullanılabilir"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr "%s: referans deÄŸeri bir dizi olamaz"
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr "%s: nameref değişkeninin kendine yaptığı referanslara izin verilmiyor"
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s: çembersel isim referansı"
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "`%s': dosya izleme tanımlayıcısı için geçersiz değer"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "işlev yapmak için `-f' kullanılamaz"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: salt okunur iÅŸlev"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr "%s: alıntılanmış bileşik dizi ataması artık kullanılmıyor"
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: dizi deÄŸiÅŸkenleri bu yolla iptal edilemez"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: ilişkisel dizi, indisli diziye dönüştürülemez"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "özdevimli yükleme mümkün değil"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "%s paylaşımlı nesnesi açılamıyor: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "%2$s paylaşımlı nesnesinde %1$s bulunamıyor: %3$s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: özdevimli olarak yüklenmemiş"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr "%s için yükleme ifadesi hata döndürdü (%d): yüklenmedi"
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: özdevimli olarak yüklenmemiş"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: silinemiyor: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: bir dizin"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: bir dosya deÄŸil"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: dosya çok büyük"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: ikili dosya çalıştırılamıyor"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: çalıştırılamıyor: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "çıkış\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "oturum açma kabuğu değil: `exit' kullanın"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "DurmuÅŸ iÅŸler var.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Çalışan görevler mevcut.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "komut yok"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "geçmiş belirtimi"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: geçici dosya açılamıyor: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "ÅŸimdiki"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "%d. iş, iş denetimsiz başlamış"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: kuraldışı seçenek -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: seçenek bir argüman gerektirir -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "çitleme iptal edildi"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: çitleme tablosu boş\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "eÅŸleÅŸme\tkomut\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Bu anahtar sözcükle eşleşen komutlar: `"
+msgstr[1] "Bu anahtar sözcüklerle eşleşen komutlar: `"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"`%s' ile ilgili bir yardım metni yok.  `help help' veya `man -k %s' ya da "
+"`info %s'.yazmayı deneyebilirsiniz."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: açılamıyor: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Bu kabuk komutları dahili olarak tanımlı. Listeyi görmek için `help'yazın.\n"
+"`AD' gibi bir işlev hakkında bilgi almak için `help AD' yazınız.\n"
+"Kabuk hakkında genel bir bilgi edinmek için `info bash'yazınız.\n"
+"Bu listede olmayan komutlar hakkında bilgi bulmak isterseniz,\n"
+"`man -k' veya `info' yazın.\n"
+"\n"
+"Bir ismin yanında bir yıldız imi (*) varsa komut iptal edilmiş demektir.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "tek bir -anrw kullanılabilir"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "geçmiş konumu"
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: geçersiz zaman damgası"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: geçmiş yorumlaması başarısız"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: inlib başarısız"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "`-x' ile başka seçenek kullanılamaz"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: argümanlar süreç veya iş kimlikleri olmalı"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Bilinmeyen hata"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "ifade bekleniyordu"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: bir sıralı dizi değil"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: dosya tanıtıcı belirtimi geçersiz"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: dosya tanıtıcı geçersiz: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: geçersiz satır sayısı"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: geçersiz dizi kökeni"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: geçersiz geri çağırım niceliği"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "boş bir dizi değişken adı"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "dizi deÄŸiÅŸken desteÄŸi gerekli"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "`%s': biçim karakteri eksik"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "`%c': geçersiz zaman biçimi belirtimi"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "`%c': biçim karakteri geçersiz"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "uyarı: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "biçim ayıklama sorunu: %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "\\x için onaltılık rakam eksik"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "evrensel kod rakamı eksik \\%c"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "baÅŸka dizin yok"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s: geçersiz argüman"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<geçerli dizin yok>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "dizin yığını boş"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "dizin yığını indisi"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Geçerli hatırlanan dizinlerin listesini görüntüler. Dizinler\n"
+"    listeye yollarını `pushd' komutu ile bulurlar; ve liste boyunca\n"
+"    yedeÄŸi `popd' komutu ile alabilirsiniz.\n"
+"    \n"
+"    Seçenekler:\n"
+"      -c\tögelerin tümünü silerek dizin yığınını temizle\n"
+"      -l\tev dizininize göreceli dizinlerin yaklaşık işareti\n"
+"    \tile başlayan sürümlerini yazdırma\n"
+"      -p\tdizin yığınını her satırda bir girdi ile yazdır\n"
+"      -v\tdizin yığınını, yığındaki konumu ile her satıra\n"
+"    \tön ek yapılmış bir girişi yazdır\n"
+"    \n"
+"    Argümanlar:\n"
+"      +N\tDizinler tarafından gösterilen listenin solundan başlayarak\n"
+"    \tN'inci girdiyi gösterir. Seçenek kullanılmadığında sıfırdan başlar.\n"
+"    \n"
+"      -N\tDizinler tarafından gösterilen listenin sağından başlayarak\n"
+"\tN'inci girdiyi gösterir. Seçenek kullanılmadığında sıfırdan başlar."
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Dizin yığıtının en üstüne bir dizin ekler, ya da geçerli çalışma\n"
+"    dizini yığıtın tepesine gelecek şekilde yığıtı döndürür. Hiç\n"
+"    argüman verilmemişse en üstteki iki dizini yer değiştirir.\n"
+"    \n"
+"    Seçenekler\n"
+"      -n\tYığıta dizin eklenirken dizinin normal değişimini yoksayar\n"
+"    \tböylece sadece yığıt değiştirilir.\n"
+"    Argümanlar:\n"
+"      +N\t(`dirs' tarafından gösterilen listenin solundan saymaya\n"
+"    \tsıfırla başlandığında) N'inci dizin tepeye gelecek şekilde\n"
+"    \tyığıtı döndürür.\n"
+"    \n"
+"      -N\t(`dirs' tarafından gösterilen listenin sağından saymaya\n"
+"    \tsıfırla başlandığında) N'inci dizin tepeye gelecek şekilde\n"
+"    \tyığıtı döndürür.\n"
+"    \n"
+"      dizin\tDiZiNi yeni çalışma dizini yaparak dizin yığıtının\n"
+"    \ttepesine ekler.\n"
+"    \n"
+"    Dizin yığıtını `dirs' komutuyla görebilirsiniz."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Dizin yığıtından girdileri siler.  Hiç argüman verilmemişse,\n"
+"    yığıtın en üstündeki dizini yığıttan kaldırır ve yığıtın\n"
+"    tepesinde kalan dizine geçer.\n"
+"    \n"
+"    Seçenekler:\n"
+"      -n\tdizinleri yığıttan silerken normal dizin değişikliğini\n"
+"    \tengeller, böylece sadece yığıt değiştirilmiş olur. \n"
+"    \n"
+"    Argümanlar:\n"
+"      +N\t`dirs' tarafından gösterilen listenin solundan saymaya\n"
+"    \tsıfırla başlandığında N'inci girdiyi  siler.  Örneğin,\n"
+"    \t`popd +0' ilk dizini `popd +1' ikincisini siler. \n"
+"      -N\t`dirs' tarafından gösterilen listenin sağından saymaya\n"
+"    \tsıfırla başlandığında N'inci girdiyi  siler.  Örneğin,\n"
+"    \t`popd -0' son dizini `popd -1' sonuncudan öncekini siler. \n"
+"    \n"
+"    Dizin yığıtını `dirs' komutuyla görebilirsiniz."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: zamanaşımı belirtimi geçersiz"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "okuma hatası: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr "sadece bir işlev veya betikten kaynaklı olarak `return' yapılabilir"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "bir işlev ve bir değişken aynı anda unset yapılamaz"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: bir dizi deÄŸiÅŸkeni deÄŸil"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: bir iÅŸlev deÄŸil"
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr "%s: export yapılamıyor"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "shift sayısı"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "kabuk seçenekleri aynı anda hem atanıp hem de iptal edilemez"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: kabuk seçenek ismi geçersiz"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "dosya ismi argüman gerekir"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: dosya yok"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "engellenemez"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "bir oturum açma kabuğu engellenemez"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s `%s' için takma addır\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s bir kabuk anahtar sözcüğüdür\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s bir iÅŸlevdir\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s özel bir kabuk yerleşiğidir\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s bir kabuk yerleÅŸiÄŸidir\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s %s'dir\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s çitilmiş (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: sınırlama argümanı geçersiz"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "`%c': hatalı komut"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: sınır alınamıyor: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "sınır"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: sınır değiştirilemiyor: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "sekizlik sayı"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "`%c': simgesel kip işleci geçersiz"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "`%c': simgesel kip karakteri geçersiz"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " satır "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "son komut: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Çıkılıyor..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr "BÄ°LGÄ°LENDÄ°R:"
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "bilinmeyen komut hatası"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "hatalı komut türü"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "hatalı bağlantı"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "hatalı sıçrama"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: bağlanmamış değişken"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\agirdi beklerken zamanaşımı: auto-logout\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "/dev/null'dan standart girdiye yönlendirme yapılamaz: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "TIMEFORMAT: `%c': biçim karakteri geçersiz"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr "execute_coproc: coproc [%d:%s] hala mevcut"
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "iletişim tüneli hatası"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr "eval: azami eval yuvalama sınırı aşıldı (%d)"
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr "%s: azami kaynak yuvalama sınırı aşıldı (%d)"
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr "%s: azami fonksiyon yuvalama sınırı aşıldı (%d)"
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: kısıtlı: komut adında `/' kullanamazsınız"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: komut yok"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: hatalı yorumlayıcı"
+
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: ikili dosya çalıştırılamıyor: %s"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "%s: bir kabuk yerleÅŸiÄŸidir"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "fd %d, fd %d olarak yinelenemiyor"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "ifade özyineleme düzeyi aşıldı"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "özyineleme yığıtı alttan taştı"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "ifadede sözdizimi hatası"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "değişken olmayana atama yapmaya çalışıldı"
+
+#: expr.c:530
+#, fuzzy
+msgid "syntax error in variable assignment"
+msgstr "ifadede sözdizimi hatası"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "sıfırla bölme"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "yazılım hatası: bad expassign token"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "koşullu ifade için `:' bekleniyordu"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "üs sıfırdan küçük"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "belirteç ön-arttırım veya ön-eksiltim sonrası bekleniyordu"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "eksik `)'"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "sözdizimi hatası: terim umuluyordu"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "sözdizimi hatası: geçersiz aritmetik işleci"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (hata belirtisi \"%s\")"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "geçersiz sayı tabanı"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: geçersiz satır sayısı"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "değer taban için fazla büyük"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: ifade hatası\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: üst dizinlere erişilemiyor"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "fd %d için geciktirmeme kipi sıfırlanamıyor"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr ""
+"fd %d tanıtıcısındaki bash girdisi için yeni dosya tanıtıcısı ayrılamıyor"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input: yeni fd %d için tampon zaten var"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: pgrp iletişim tüneli"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "çatallanan pid %d, çalışan iş %d içinde görünüyor"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "durdurulan %2$ld süreç gruplu iş %1$d  siliniyor"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process: %5ld (%s) program kimliği hala canlı olarak işaretli"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: böyle bir pid yok"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Sinyal %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Bitti"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Durdu"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Durdu(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "Çalışıyor"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Bitti(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Çıkış %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Bilinmeyen durum"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(çekirdek döküldü)"
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (wd: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "alt setpgid (ÅŸuradan: %ld ÅŸuraya: %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: pid %ld bu kabuğun bir alt sürecine ait değil"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: süreç %ld için kayıt yok"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: iÅŸ %d durdu"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: böyle bir iş yok"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: iş sonlanmış"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: iÅŸ %d zaten artalanda"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr "waitchld: belirsiz blok önlenmek için WNOHANG açılıyor"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: satır %d: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (çekirdek döküldü)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(wd artık: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: getpgrp başarısız"
+
+#: jobs.c:4447
+#, fuzzy
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: satır düzeni"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: satır düzeni"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "uçbirim süreç grunu (%d) ayarlanamaz"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "bu kabukta iÅŸ denetimi yok"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: kanaat doğrulaması başarısız: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d: kanaat doğrulaması battı\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "bilinmeyen"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: serbest bırakılmış liste üstünde blok üste yazdı"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: zaten serbest bırakılmış blok argümanı ile çağrıldı"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: ayrılmamış blok argümanı ile çağrıldı"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: alttan taşma saptandı; mh_nbytes aralık dışında"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: alttan taşma saptandı; mh_nbytes aralık dışında"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: başlangıç ve son tomar boyutları farklı"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: ayrılmamış blok argümanı ile çağrıldı"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc: alttan taşma saptandı; mh_nbytes aralık dışında"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc: alttan taşma saptandı; mh_nbytes aralık dışında"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: başlangıç ve son tomar boyutları farklı"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: alloc tablosu FIND_ALLOC ile dolu olabilir mi?\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: %p zaten ayrılmış olarak tabloda değil mi?\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: %p zaten serbest bırakılmış olarak tabloda değil mi?\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "geçersiz taban"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: konak bilinmiyor"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: geçersiz hizmet"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: hatalı ağ yolu belirtimi"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "desteklenmeyen aÄŸ iÅŸlemleri"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: (%s) diline deÄŸiÅŸtirilemedi"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: ÅŸu dile (%s) deÄŸiÅŸtirilemedi: %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: yerel (%s) deÄŸiÅŸtirilemiyor"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: yerel (%s) deÄŸiÅŸtirilemiyor: %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "$_'de postanız var"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "$_'de yeni postanız var"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "%s'deki posta okundu\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "sözdizimi hatası: aritmetik ifadesi gerekli"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "sözdizimi hatası: `;' beklenmiyordu"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "sözdizimi hatası: `((%s))'"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: hatalı yönerge türü %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr "bu belgede %d satırında dosya sonu sonlandırılmış (istenen `%s')"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr "make_redirection: yönlendirme yönergesi `%d' aralık dışında"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+"shell_getc: shell_input_line_size (%zu) SIZE_MAX değerini aşıyor (%lu): "
+"satır kırpıldı"
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr "en fazla buraya belge sayısı aşıldı"
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "`%c' için eşleşme aranırken beklenmedik dosya sonu"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "`]]' aranırken beklenmedik dosya sonu"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "koşullu ifadede sözdizimi hatası: beklenmedik dizgecik `%s'"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "koşullu ifadede sözdizimi hatası"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "beklenmedik dizgecik `%s', `)' umuluyordu"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "`)' umuluyordu"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "koşullu tek terimli işlece beklenmedik argüman `%s'"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "koşullu tek terimli işlece beklenmedik argüman"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "beklenmedik dizgecik `%s', koşullu iki terimli işleç umuluyordu"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "koşullu iki terimli işleç umuluyordu"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "koşullu iki terimli işlece beklenmedik argüman `%s'"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "koşullu iki terimli işlece beklenmedik argüman"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "koÅŸullu komutta beklenmeyen dizgecik `%c'"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "koÅŸullu komutta beklenmeyen dizgecik `%s'"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "koÅŸullu komutta beklenmeyen dizgecik %d"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "beklenmeyen dizgecik `%s' yakınında sözdizimi hatası"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "`%s' yakınında sözdizimi hatası"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "sözdizimi hatası: beklenmeyen dosya sonu"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "sözdizimi hatası"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Kabuğu bırakmak için \"%s\" kullanın.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "`)' için eşleşme aranırken beklenmedik dosya sonu"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "completion: `%s' iÅŸlevi yok"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr "programmable_completion: %s: muhtemel yeniden deneme döngüsü"
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: NULL COMPSPEC"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: hatalı bağlayıcı `%d'"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: geçersiz dosya tanımlayıcısı"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: BOŞ dosya işaretçisi"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != fileno xtrace fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: `%c': geçersiz biçim karakteri"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "dosya tanıtıcı aralık dışında"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: belirsiz yönlendirme"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: mevcut dosyanın üzerine yazılamıyor"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: kısıtlı: çıktı yönlendirilemiyor"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "belge için geçici dosya oluşturulamıyor: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: fd değişkene atanamıyor"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "/dev/(tcp|udp)/host/port ağ olmaksızın desteklenmiyor"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "yönlendirme hatası: fd yinelenemiyor"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "/tmp bulunamadı, lütfen oluşturun!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp geçerli bir dizinin adı olmalıdır"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr ""
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: geçersiz seçenek"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "uid %d olarak ayarlanamıyor: etkin uid %d"
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "gid %d olarak ayarlanamıyor: etkin gid %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr "hata ayıklayıcı başlatılamadı, hata ayıklama devre dışı"
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr "%s: Bir dizin"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "Hiç ismim yok!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, sürüm %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Kullanım:\t%s [GNU uzun seçeneği] [seçenek] ...\n"
+"\t%s [GNU uzun seçeneği] [seçenek] betik-dosyası ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "GNU uzun seçenekleri:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Kabuk seçenekleri:\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-ilrsD veya -c KOMUT veya -O shopt_seçeneği\t\t(sadece çağrı için)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s ya da -o seçeneği\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+"Kabuk seçenekleriyle ilgili daha fazla bilgi için `%s -c \"help set\"' "
+"yazın.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr ""
+"Kabuk yerleşik komutlarıyla ilgili bilgi almak için `%s -c help' yazın.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr ""
+"Yazılım hatalarını raporlamak için `bashbug' komutunu kullanınız.\n"
+"Çeviri hatalarını ise <gnu-tr@belgeler.org> adresine bildiriniz.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr "bash ana sayfası: <http://www.gnu.org/software/bash>\n"
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr ""
+"GNU yazılımı kullanımı hakkında genel yardım: <http://www.gnu.org/gethelp/>\n"
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: geçersiz işlem"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Bogus sinyali"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Engelle"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Kes"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Çık"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Geçersiz talimat"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "BPT izle/tuzak"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "Talimatı DURDUR"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "EMT talimatı"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Kayan nokta istisnası"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Öldürüldü"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Veriyolu hatası"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Bölünme hatası"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Bozuk sistem çağırımı"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Bozuk iletişim tüneli"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Çalar saat"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Sonlandırıldı"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "Acil GÇ koşulu"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Durduruldu (sinyal)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Devam et"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Alt ölümü veya durdurulma"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Durduruldu (tty giriÅŸi)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Durduruldu (tty çıkışı)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "G/Ç hazır"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "CPU sınırı"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "Dosya sınırı"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Alarm (sanal)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Alarm (profil)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Pencere deÄŸiÅŸtirildi"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Kayıt kilidi"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Kullanıcı sinyali 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Kullanıcı sinyali 2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "HFT girdi verisi bekliyor"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "yakın güç başarısızlığı"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "yakın sistem çökmesi"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "süreci başka bir işlemciye aktar"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "programlama hatası"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "HFT izleyici kipine geçildi"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "HFT izleyici kipi kapatıldı"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "HFT ses sırası tamamlandı"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "Bilgi talebi"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "Bilinmeyen Sinyal #%d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "hatalı ikame: %2$s içinde kapatan `%1$s' yok"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: dizi üyesine liste atanamaz"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "süreç ikamesi için borulama yapılamıyor"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "süreç ikamesi için alt süreç yapılamıyor"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "isimli boru %s okumak için açılamıyor"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "isimli boru %s yazmak için açılamıyor"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "isimli boru %s fd %d olarak yinelenemiyor"
+
+#: subst.c:6213
+msgid "command substitution: ignored null byte in input"
+msgstr "komut ikamesi: girdideki null bayt yoksayıldı"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "komut ikamesi için boru yapılamıyor"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "komut ikamesi için alt süreç yapılamıyor"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute: boru fd 1 olarak yinelenemiyor"
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: dosya izleme tanımlayıcısı için geçersiz değer"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: geçersiz dolaylı yayılım"
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr "%s: geçersiz değişken adı"
+
+#: subst.c:7256
+#, fuzzy, c-format
+msgid "%s: parameter not set"
+msgstr "%s: parametre boş ya da değer atanmamış"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: parametre boş ya da değer atanmamış"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: altdizge ifadesi < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: hatalı ikame"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: bu yolla atama yapılmaz"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+"kabuk gelecekteki sürümlerinde, bir aritmetik ikame olarak değerlendirmeye "
+"zorlayacak"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "hatalı ikame: %s içinde kapatan \"`\" yok"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "eÅŸleÅŸme yok: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "argüman bekleniyordu"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: tamsayı ifadesi bekleniyordu"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "`)' bekleniyordu"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "`)' bekleniyordu, %s bulundu"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: iki terimli iÅŸleci bekleniyordu"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: tek terimli iÅŸleci bekleniyordu"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "eksik `]'"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "sözdizimi hatası: `;' beklenmiyordu"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "geçersiz sinyal numarası"
+
+#: trap.c:325
+#, fuzzy, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr "eval: azami eval yuvalama sınırı aşıldı (%d)"
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps:trap_list[%d] içinde hatalı değer: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps: sinyal yakalayıcı SIG_DFL'dir, kendime %d (%s) göndererek"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler:hatalı sinyal %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "`%s'nin işlev tanımının içeri aktarılmasında hata"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "kabuk düzeyi (%d) çok yüksek, 1 yapılıyor"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: geçerli etki alanında hiç işlev bağlamı yok"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: değişkene değer atanmamış olabilir"
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr "%s: isim referansına tamsayı ataması"
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: geçerli etki alanında hiç işlev bağlamı yok"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s boş exportstr içeriyor"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "%2$s için exportstr içinde geçersiz karakter %1$d"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "%s için exportstr içinde `=' yok"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr "pop_var_context: kabuk değişkenlerinin başı bir işlev bağlamı değil"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: genel değişkenler bağlamı yok"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr ""
+"pop_scope: kabuk değişkenlerinin başı bir geçici ortam etki alanı değil"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: DOSYA olarak açılamaz"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: dosya izleme tanımlayıcısı için geçersiz değer"
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s: uyumlulukdeğeri aralık dışı"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Telif Hakkı (C) 2012 Özgür Yazılım Vakfı A.Ş."
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"Lisans GPLv3+: GNU GPL sürüm 3 veya sonrası <http://gnu.org/licenses/gpl."
+"html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, sürüm %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr "Bu ücretsiz bir yazılımdır; değiştirmekte ve dağıtmakta özgürsünüz."
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "İzin verilen yasalar kapsamında hiçbir GARANTİSİ BULUNMAMAKTADIR."
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %lu bayt ayrılamıyor (%lu bayt ayrıldı)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: %lu bayt ayrılamıyor"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: %lu bayt ayrılamıyor (%lu bayt ayrıldı)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: %lu bayt ayrılamıyor"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [isim[=deÄŸer] ... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] isim [isim ...]"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpvsPVSX] [-m anahtar eşleniği] [-f dosyaadı] [-q isim] [-u isim] [-r "
+"anahtar sırası] [-x keyseq:kabuk-komutu] [keyseq:satırokuma-işlevi veya "
+"satırokuma-komutu]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [kabuk-dahili [arg ...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [ifade]"
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]] [-@]] [dizin]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] command [arg ...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilnrtux] [-p] [isim[=deÄŸer] ...]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilnrtux] [-p] isim[=deÄŸer] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [seçenek] isim[=değer] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [arg ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [arg ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f dosyaadı] [isim ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [arg ...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts optstring isim [arg]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a isim] [komut [argümanlar ...]] [yönlendirme ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr "fc [-e ename] [-lnr] [ilk] [son] veya fc -s [pat=rep] [komut]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [görev_tan]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [görev_tan ...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p yoladı] [-dt] [isim ...]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [desen ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d başlangıç] [n] veya history -anrw [dosyaadı] veya history -"
+"ps arg [arg...]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [görevtan ...] veya jobs -x komut [argü]"
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [görevtan ... | pid ...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s sinspec | -n signum | -sigspec] pid | görevtan ... veya kill -l "
+"[sigspec]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let arg [arg ...]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a dizi] [-d sonlandırıcı] [-i metin] [-n nkarakter] [-N "
+"nkarakter] [-p istem] [-t zamanaşımı] [-u fd] [isim ...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [isim ...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [isim[=deÄŸer] ...] veya export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [isim[=deÄŸer] ...] veya readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source dosyaadı [argümanlar]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". dosyaadı [argümanlar]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [ifade]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ arg... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[arg] sinyal_tan ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] isim [isim ...]"
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [sınır]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [kip]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-n] [id ...]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [pid ...]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for Ä°SÄ°M [in KELÄ°MELER ... ] ; do KOMUTLAR; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( ifade1; ifade2; ifade3 )); do KOMUTLAR; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select Ä°SÄ°M [in KELÄ°MELER ... ;] do KOMUTLAR; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] zamantüneli"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case KELÄ°ME in [DESEN [| DESEN]...) KOMUTLAR ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if KOMUTLAR; then KOMUTLAR; [ elif KOMUTLAR; then KOMUTLAR; ]... [ else "
+"KOMUTLAR; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while KOMUTLAR; do KOMUTLAR; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until KOMUTLAR; do KOMUTLAR; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [isim] command [yönlendirmeler]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function isim { KOMUTLAR ; } veya isim () { KOMUTLAR ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ KOMUTLAR ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "görev_tan [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( ifade ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ ifade ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "variables - Bazı kabuk değişkenlerinin isim ve anlamları"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | dizin]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [optname ...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v var] biçim [argümanlar]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DE] [-o seçenek] [-A işlem] [-G genelyol] [-"
+"W kelimelistesi]  [-F işlev] [-C komut] [-X süzgeçyolu] [-P önek] [-S sonek] "
+"[isim ...]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o seçenek] [-A işlem] [-G genelyol] [-W "
+"kelimelistesi]  [-F işlev] [-C komut] [-X süzgeçyolu] [-P önek] [-S sonek] "
+"[kelime]"
+
+#: builtins.c:239
+#, fuzzy
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o seçenek] [-DE] [isim ...]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-d sonlandrc] [-n say] [-O kaynak] [-s say] [-t] [-u fd] [-C "
+"geriçağırım] [-c parçacık] [dizi]"
+
+#: builtins.c:244
+#, fuzzy
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-n say] [-O kaynak] [-s say] [-t] [-u fd] [-C geriçağırım] [-c "
+"parçacık] [dizi]"
+
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Rumuz tanımla veya görüntüle.\n"
+"    \n"
+"    `alias' argümansız kullanıldığında standart çıktıda kullanılabilecek "
+"tüm\n"
+"    rumuzları `alias İSİM=DEĞER' biçiminde listeler.\n"
+"    \n"
+"    Diğer durumda DEĞERi verilmiş her İSİM için bir rumuz tanımlanır.\n"
+"    DEÄžERdeki boÅŸluk, rumuz geniÅŸletildiÄŸinde sonraki kelimenin rumuz\n"
+"    ikamesi için denetlenmesine sebep olur.\n"
+"    \n"
+"    Seçenekler:\n"
+"      -p\tTüm rumuzları tekrar kullanılabilir biçimde listele\n"
+"    \n"
+"    Çıkış Durumu:\n"
+"    Hiçbir şeyin rumuzu olmayan bir İSİM verilmedikçe alias doğru döndürür."
+
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Tanımlı rumuzlar listesinden her İSMİ kaldır.\n"
+"    \n"
+"    Seçenekler:\n"
+"      -a\ttüm rumuz tanımlamalarını kaldır\n"
+"    \n"
+"    İSİM mevcut olmayan bir rumuz olmadığı takdirde doğru\n"
+"    döndür."
+
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"Readline tuş atamalarını ve değişkenlerini ayarla.\n"
+"    \n"
+"    Bir tuÅŸ dizilimini bir Readline iÅŸlevine veya makrosuna baÄŸlar ya da\n"
+"    bir Readline değişkeni atar. Seçeneksiz argüman sözdizimi ~/.initrc\n"
+"    içinde bulunana  eşdeğerdir,  ama tek bir argüman olarak aktarılması\n"
+"    gerekir: bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Seçenekler:\n"
+"      -m  TUŞDİZİSİ         Bu komut süresince kısayol olarak TUŞDİZİSİ\n"
+"                         kullanılır. Olası kısayol isimleri:  emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi,\n"
+"                         vi-move, vi-command ve vi-insert.\n"
+"      -l                 Ä°ÅŸlev isimlerini listeler.\n"
+"      -P                 İşlev isimlerini ve kısayolları listeler.\n"
+"      -p                 İşlev isimlerini ve kısayolları, girdi olarak\n"
+"                         kullanılabilir biçimde listeler.\n"
+"      -S                 Makroları çağıran tuş dizilerini ve değerlerini\n"
+"                         listeler\n"
+"      -s                 Makroları çağıran tuş dizilerini ve değerlerini\n"
+"                         girdi olarak kullanılabilir biçimde listeler.       "
+"-V                 DeÄŸiÅŸken isimlerini ve deÄŸerlerini listeler.\n"
+"      -v                 DeÄŸiÅŸken isimlerini ve deÄŸerlerini girdi olarak\n"
+"                         kullanılabilir biçimde listeler.\n"
+"      -q  İŞLEV          İsmi belirtilen İŞLEVi çağıran tuşlar hakkında "
+"sorgu.\n"
+"      -u  İŞLEV          İsmi belirtilen İŞLEVi çağıran tüm tuş "
+"kısayollarını\n"
+"                         kaldırır.\n"
+"      -r  TUŞDİZİSİ      TUŞDİZİSİ için mevcut kısayolları kaldırır.\n"
+"      -x  TUÅžDÄ°ZÄ°SÄ°:KABUK-KOMUTU\tTUÅžDÄ°ZÄ°SÄ°nin her giriliÅŸinde KABUK-"
+"KOMUTUnun\n"
+"    \t\t\t\tçalıştırılmasını sağlar.\n"
+"      -X                 Tuş dizilerini -x ve ilişkili komutlarını tekrar "
+"bir girdi olarak kullanılabilecek\n"
+"                         biçimde listeler.\n"
+"    \n"
+"    Çıkış Durumu:\n"
+"    tanınmayan bir seçenek girilmediği veya bir hata oluşmadığı durumda 0 "
+"döndürür."
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"for, while veya until döngülerinden çık.\n"
+"    \n"
+"    Bir FOR, WHILE veya UNTIL döngüsünden çık. Eğer N belirtilmişse, N "
+"iliÅŸkili\n"
+"    döngüden çık.\n"
+"    \n"
+"    Çıkış Durumu:\n"
+"    N, 1'e eşit veya daha fazla olmadığında çıkış durumu 0'dır."
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"for, while veya until döngülerine devam et.\n"
+"    \n"
+"    İlişkili FOR, WHILE veya UNTIL döngüsünün sonraki adımına devam eder.\n"
+"    N tanımlanmışsa, N'inci ilişkili döngüye devam eder.\n"
+"    \n"
+"    Çıkış Durumu:\n"
+"    N, 1 veya daha büyük olmadığında çıkış durumu 0'dır."
+
+#: builtins.c:354
+#, fuzzy
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Kabuk dahillerini çalıştır.\n"
+"    \n"
+"    Komut araması yapmadan KABUK-DAHİLİ, ARGÜMANLAR argümanları ile\n"
+"    çalıştır. Bu, bir KABUK-DAHİLİ, bir kabuk işlevi olarak tekrar uygulamak "
+"isteyip\n"
+"    işlev içerisinde dahili olanı da çalıştırmanız gerektiğinizde "
+"kullanışlıdır.\n"
+"    \n"
+"    Çıkış Durumu:\n"
+"    KABUK-DAHİLİnin çıkış durumunu veya eğer KABUK-DAHİLİ değilse false "
+"döndürür."
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Geçerli alt yordam çağrısının bağlamını döndürür.\n"
+"    \n"
+"    İFADE olmadan, \"$satır $dosyaadı\" döndürür.  İFADE ile "
+"kullanıldığında\n"
+"    \"$satır $altyordam $dosyaadı\" döndürür; bu ek bilgi bir yığın izi "
+"saÄŸlamak\n"
+"    için kullanılabilir.\n"
+"    \n"
+"    İFADE değeri, geçerli çerçeveden önce kaç tane çerçeve çağrılacağını\n"
+"    belirtir. Üst çerçeve 0. çerçevedir.    \n"
+"    Çıkış Durumu:\n"
+"    İFADE geçersiz olmadığı ve bir kabuk işlevi çalıştırmadığı durumda 0 "
+"döndürür."
+
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"Kabuk çalışma dizinini değiştir.\n"
+"    \n"
+"    Geçerli dizini DİZİN olarak değiştir. Öntanımlı dizin kabuk değişkeninin "
+"EV\n"
+"    dizini deÄŸeridir.\n"
+"    \n"
+"    CDPATH değişkeni, DİZİN içeren dizinler için arama yolunu tanımlar. "
+"CDPATH\n"
+"    için alternatif dizin isimleri iki nokta (:) ile ayrılır.\n"
+"    Boş dizin adı, geçerli dizinle aynıdır. Eğer DİZİN bölü (/) ile "
+"başlıyorsa, CDPATH\n"
+"    kullanılmaz.\n"
+"    \n"
+"    Eğer dizin bulunamazsa ve kabuk seçeneği `cdable_vars' ayarlanmışsa, "
+"kelime\n"
+"    bir değişken adı olarak varsayılır. Eğer değişken bir değere sahipse, "
+"deÄŸeri DÄ°ZÄ°N\n"
+"    için kullanılır\n"
+"    \n"
+"    Seçenekler:\n"
+"        -L\tsembolik bağlantıların takip edilmesini zorla: '..' "
+"örneklerinin\n"
+"    \t\tişlenmesinden sonra DİZİN içindeki sembolik bağlantıları çöz\n"
+"        -P\tsembolik bağlantıları takip etmeden fiziksel dizini kullan: '..' "
+"örneklerinin\n"
+"    \t\tişlenmesinden önce DİZİN içindeki sembolik bağlantıları çöz\n"
+"        -e\teğer -P seçeneği belirtilmişse ve geçerli çalışma dizini "
+"başarılı şekilde\n"
+"    \tbelirlenemiyorsa, sıfır olmayan bir durumla çık\n"
+"       -@\tdestekleyen sistemlerde, dosya niteliklerini içeren bir dizin "
+"olarak uzatılmış\n"
+"           niteliklere sahip bir dosya sun    \n"
+"    Öntanımlı olan `-L' tanımlanmış gibi sembolik bağlantıları takip "
+"etmektir.\n"
+"    \n"
+"    Çıkış Durumu:\n"
+"    Eğer dizin değişmişse ve -P kullanıldığında $PWD başarılı ayarlanırsa 0; "
+"diÄŸer durumda\n"
+"    sıfır olmayan bir değer döndürür."
+
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"Geçerli çalışma dizininin ismini yazdır.\n"
+"    \n"
+"    Seçenekler:\n"
+"      -L\teğer geçerli çalışma dizinini isimlendirmişse $PWD değerini "
+"yazdır\n"
+"      -P\thiçbir sembolik bağlantı kullanmadan fiziksel dizini yazdır\n"
+"    \n"
+"    Öntanımlı olarak `pwd', `-L' tanımlanmış şekilde davranır.\n"
+"    \n"
+"    Çıkış Durumu:\n"
+"    Dizin okunamadığı veya geçersiz seçenek verilmediği takdirde 0 döndürür."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"BoÅŸ komut.\n"
+"    \n"
+"    Etkisizdir; bu komut birÅŸey yapmaz.\n"
+"    \n"
+"    Çıkış Durumu:\n"
+"    Her zaman başarılıdır."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Bir başarılı sonuç dönrürür.\n"
+"    \n"
+"    Çıkış Durumu:\n"
+"    Her zaman başarılıdır."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Başarısız bir sonuç döndür.\n"
+"    \n"
+"    Çıkış Durumu:\n"
+"    Her zaman başarısızdır."
+
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Basit bir komut çalıştır veya komutlar hakkında bilgi görüntüle.\n"
+"    \n"
+"    KOMUTU ARGümanları ile kabuk işlevi aramasını ihmal ederek çalıştırır "
+"veya\n"
+"    belirtilen KOMUTlar hakkında bilgi görüntüler. Aynı isimde bir işlev  "
+"varsa\n"
+"    diskte komutları çalıştırmak için kullanılabilir.\n"
+"    \n"
+"    Seçenekler:\n"
+"      -p    YOL için, tüm standart yardımcıları bulabilmek için bir "
+"öntanımlı değer\n"
+"    \tkullan\n"
+"      -v    `type' dahilisine benzer bir KOMUT açıklaması göster\n"
+"      -V    her KOMUTun fazla açıklamasını göster\n"
+"    \n"
+"    Çıkış Durumu:\n"
+"    KOMUTun çıkış durumunu döndürür. KOMUT bulunamazsa başarısız olur."
+
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"DeÄŸiÅŸken deÄŸer ve niteliklerini ayarla.\n"
+"    \n"
+"    Değişkenleri ayarla ve nitelik ver. Eğer İSİM verilmemişse, tüm "
+"değişkenlerin,    niteliklerini ve değerlerini görüntüle.\n"
+"    \n"
+"    Seçenekler:\n"
+"      -f\teylemi veya işlev ismi ile tanımları gösterimini kısıtla\n"
+"      -F\tsadece işlev isim gösterimlerini kısıtla (ek olarak satır sayısı "
+"ve hata ayıklarken\n"
+"    \t\tkaynak dosyayı)\n"
+"      -g\tbir kabuk fonksiyonunda kullanıldığında evrensel değişken "
+"oluÅŸtur,\n"
+"    \t\taksi takdirde yoksayılır\n"
+"      -p\ther İSİMin değeri ve niteliklerini görüntüle\n"
+"    \n"
+"    Nitelik ayarlayan seçenekler:\n"
+"      -a\tİSİMleri indisli diziler yapmak için (destekleniyorsa)\n"
+"      -A\tİSİMleri ilişkisel dizi yapmak için (destekleniyorsa)\n"
+"      -i\tİSİMleri `integer' niteliği sahibi yapmak için\n"
+"      -l\tİSİMleri atamada küçük harfe dönüştürmek için\n"
+"      -n\tÄ°SÄ°Mi deÄŸeriyle isimlendirilmiÅŸ bir deÄŸiÅŸkene referans yapmak "
+"için\n"
+"      -r\tİSİMleri salt okunur yapmak için\n"
+"      -t\tİSİMlerin `trace' niteliği sahibi yapmak için\n"
+"      -u\tİSİMleri atamada büyük harfe dönüştürmek için\n"
+"      -x\tİSİMleri dışarı çıkarabilir yapmak için\n"
+"    \n"
+"    `-' yerine `+' kullanmak belirtilen niteliği kapatır.\n"
+"    \n"
+"    Tamsayı niteliğine sahip değişkenler, bir değere atandıklarında     "
+"aritmetik değerlendirmeye tabi tutulurlar (`let' komutuna bakın).\n"
+"    \n"
+"    Bir fonksiyonda kullanıldığında, `declare' İSİMleri, `local' komutu\n"
+"gibi yerel\n"
+"    yapar.  `-g' seçeneği bu davranışı iptal eder.\n"
+"    \n"
+"    Çıkış Durumu:\n"
+"    Geçersiz bir değer sağlanmadığı veya değişken atama hatası olmadığı "
+"sürece\n"
+"    başarılı döner."
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"DeÄŸiÅŸken isim ve niteliklerini ayarla.\n"
+"    \n"
+"    `declare' ile eş anlamlıdır.  Bkz. `help declare'."
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Yerel değişkenleri tanımla.\n"
+"    \n"
+"    İSİM adıyla bir yerel değişken oluştur ve DEĞER ata. SEÇENEK `declare'\n"
+"    tarafından kabul edilen herhangi bir seçenek olabilir.\n"
+"    \n"
+"    Yerel değişkenler sadece bir işlev içerisinde kullanılabilirler ve "
+"tanımlandıkları\n"
+"    işleve ve alt işlevlerine görünebilirler.\n"
+"    \n"
+"    Çıkış Durumu:\n"
+"    Geçersiz bir seçenek verilmediğinde, bir değişken hatası oluşmadığında "
+"veya\n"
+"    kabuk bir işlev çalıştırmıyorsa başarılı döner."
+
+#: builtins.c:557
+#, fuzzy
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Argümanları standart çıktıya yaz.\n"
+"    \n"
+"    ARGümanları yeni satırla izlenen standart çıktıda bir boşluk karakteri\n"
+"    kullandıktan sonra göster.\n"
+"    \n"
+"    Seçenekler:\n"
+"      -n\tyeni satıra başvurma\n"
+"      -e\ttakip eden ters bölü kaçışlarının yorumlanmasını etkinleştir\n"
+"      -E\tters bölü kaçışlarının yorumlanmasını açıkça gizle\n"
+"    \n"
+"    `echo' aşağıdaki ters bölü kaçışlı karakterleri yorumlar:\n"
+"      \\a\tuyarı (zil)\n"
+"      \\b\tgerisilme\n"
+"      \\c\tsonraki çıktıları gizle\n"
+"      \\e\tkaçış karakteri\n"
+"      \\E\tkaçış karakteri\n"
+"      \\f\tform besleme\n"
+"      \\n\tyeni satır\n"
+"      \\r\tsatırbaşı\n"
+"      \\t\tyatay sekme\n"
+"      \\v\tdikey sekme\n"
+"      \\\\\tters bölü\n"
+"      \\0nnn\tASCII kodu NNN (sekizlik) olan karakter.  NNN 0-3 arası "
+"sekizli\n"
+"    \t\trakamlardan oluÅŸabilir.\n"
+"      \\xHH\tdeğeri HH (onaltılık) olan sekiz bit karakter. HH bir veya iki\n"
+"    \t\tonaltılık rakam olabilir\n"
+"    \n"
+"    Çıkış Durumu:\n"
+"    Yazma hatası oluşmadığı takdirde başarılı döner."
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Argümanları standart çıktıya yaz.\n"
+"    \n"
+"    ARGümanları yeni satır ile takip eden standart çıktıda görüntüle.\n"
+"    \n"
+"    Seçenekler:\n"
+"      -n\tyeni bir satıra başvurma\n"
+"    \n"
+"    Çıkış Durumu:\n"
+"    Bir hata oluşmadığı sürece başarılı döner."
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"Kabuk yerleşiklerini etkinleştir/devre dışı bırak.\n"
+"    \n"
+"    Dahili kabuk komutlarını etkinleştirir ve devre dışı bırakır.  Devre "
+"dışı\n"
+"    bırakmak bir kabuk yerleşiği ile aynı isme sahip bir disk komutunu tam\n"
+"    bir yol adı kullanmadan çalıştırmanızı sağlar.    \n"
+"    Seçenekler:\n"
+"      -a\ttüm yerleşikler listesini etkin olup olmadıkları bilgisi ile "
+"yazdır\n"
+"      -n\ther İSİMi devre dışı bırak veya devre dışı olanları listele\n"
+"      -p\tyerleşik listesini tekrar kullanılabilir biçimde yazdır\n"
+"      -s\tsadece Posix `özel' yerleşiklerinin isimlerini yazdır\n"
+"    \n"
+"    Hareketli yüklemeyi denetleyen seçenekler:\n"
+"      -f\tİSİM yerleşiğini paylaşılan DOSYAADI nesnesinden yükle\n"
+"      -d\t-f ile yüklenmiş bir yerleşiği kaldır\n"
+"    \n"
+"    Seçenek olmazsa her İSİM etkinleştirilir.\n"
+"    \n"
+"    Kabuk yerleşiği sürümü yerine $PATH içerisinde bulunan `test' kullanmak\n"
+"    için `enable -n test' yazın.\n"
+"    \n"
+"    Çıktı Durumu:\n"
+"    İSİM bir kabuk yerleşiği değilse ve hata oluşmazsa başarılı döner."
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Argümanları kabuk komutu olarak çalıştır.\n"
+"    \n"
+"    ARGümanları tek bir dizgeye birleştir, sonucu kabuğa girdi olarak "
+"kullan,\n"
+"    ve sonuçlanan komutları çalıştır.\n"
+"    \n"
+"    Çıkış Durumu:\n"
+"    Komutun çıkış durumunu döndürür veya komut boşsa başarılı döner."
+
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"Seçenek argümanlarını ayıklar.\n"
+"    \n"
+"    Getopts  kabuk betikleri tarafından  konumsal parametreleri "
+"çözümlemekte\n"
+"    kullanılır.\n"
+"    \n"
+"    SÇNDİZGESİ  tanınan seçenek karakterlerini içerir; bir karakterden "
+"sonra\n"
+"    bir ikinokta imi (:) geliyorsa seçeneğin ondan bir boşlukla ayrılmış "
+"bir\n"
+"    argümana sahip olacağı umulur.\n"
+"    \n"
+"    Her  çağrılışında  getopts  işlenecek  sonraki argümanın indisini "
+"OPTIND\n"
+"    kabuk deÄŸiÅŸkenine ve  AD  deÄŸiÅŸkenini de  mevcut  deÄŸilse  "
+"ilklendirerek\n"
+"    sonraki seçeneği $AD kabuk değişkenine yerleştirir. OPTIND kabuğun ya "
+"da\n"
+"    bir  kabuk  betiğinin her çağrılışında 1 ile ilklendirilir.  Bir "
+"seçenek\n"
+"    bir  argüman  gerektirdiğinde  getopts   argümanı   OPTARG   "
+"deÄŸiÅŸkenine\n"
+"    yerleÅŸtirir.\n"
+"    \n"
+"    getopts  hataları  iki  yolla  raporlayabilir.   Eğer  SÇNDİZGESİnin "
+"ilk\n"
+"    karakteri  bir  ':'  ise sessiz  hata  raporlaması kullanılır.  Bu "
+"kipte\n"
+"    hiçbir hata iletisi  basılmaz.  Bir geçersiz  seçenek  saptanırsa "
+"getopt\n"
+"    OPTARG'a  bulunan  seçenek karakterini yerleştirir.  Bir gerekli "
+"argüman\n"
+"    verilmemiÅŸse, getopts  AD'a bir  ':'  yerleÅŸtirir.  Getopts sessiz "
+"kipte\n"
+"    değilse ve geçersiz bir seçenek görüldüğünde, getopts ? karakterini "
+"AD'a\n"
+"    yerleştirir ve  OPTARG  değişkenini  kaldırır.  Eğer bir gerekli "
+"argüman\n"
+"    bulunamazsa   ve   getopts   sessiz   kipte  deÄŸilse  AD'a  ?  "
+"karakteri\n"
+"    yerleştirilir, OPTARG kaldırılır ve bir tanı iletisi basılır.\n"
+"    \n"
+"    OPTERR  değişkeninin  değeri  0  ise SÇNDİZGESİnin ilk karakteri bir "
+"':'\n"
+"    olmasa  bile  hata  iletileri gösterilmez. OPTERR değişkeninin "
+"öntanımlı\n"
+"    deÄŸeri 1'dir.\n"
+"    \n"
+"    Getopts  normalde  konumsal  parametreleri ($0 - $9) çözümlese de  "
+"baÅŸka\n"
+"    argümanlar verilmişse bunları çözümler.\n"
+"    \n"
+"    Çıktı Durumu:\n"
+"    Bir seçenek bulunduğunda başarılı, seçenek sonuna gelindiğinde veya "
+"bir     hata oluştuğunda başarısız döner.\n"
+"    encountered or an error occurs."
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"KabuÄŸu verilen komutla deÄŸiÅŸtir.\n"
+"    \n"
+"    KOMUTU, belirtilen program ile değiştirerek çalıştır.\n"
+"    ARGÜMANLAR, KOMUTUN argümanları olur. Eğer KOMUT belirtilmemişse, tüm\n"
+"    yönlendirmeler geçerli kabukta uygulanır.\n"
+"    \n"
+"    Seçenekler:\n"
+"      -a isim\tİSMİ, KOMUTun sıfırıncı argümanına ata\n"
+"      -c\tKOMUTu boş bir ortamla çalıştır\n"
+"      -l\tKOMUTun sıfırıncı argümanına bir çizgi koy\n"
+"    \n"
+"    Eğer komut çalıştırılamıyorsa, `execfail' ayarlanmadığı sürece "
+"etkileÅŸimsiz kabuk\n"
+"    çıkış yapar.\n"
+"    \n"
+"    Çıkış Durumu:\n"
+"    KOMUT bulunduğu ve bir yönlendirme hatası olmadığı sürece başarılı döner."
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Exit the shell.\n"
+"    \n"
+"    N durumu ile dönerek kabuk çıkar. N verilmezse son çalıştırılan komutun\n"
+"    çıkış durumu döner."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Oturum kabuğundan çık.\n"
+"    \n"
+"    N durumuyla bir oturum kabuğundan çıkar. Eğer çalıştırılmamışsa oturum\n"
+"    kabuğunda bir hata döndürür."
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"Geçmiş listesindeki komutları görüntüle veya çalıştır\n"
+"    \n"
+"    fc, komut  geçmişi  listesindeki  komutları  listelemek,  düzenlemek  "
+"ve\n"
+"    yeniden  çalıştırmak  için  kullanılır. İLK ve SON olarak numara "
+"vererek\n"
+"    bir aralık belirtilebileceği gibi İLK bir dizge de olabilir, bu "
+"takdirde\n"
+"    bu dizge ile başlayan en son komut anlamına gelir.\n"
+"    \n"
+"    Seçenekler:\n"
+"       -e DÜZENLEYİCİ ile hangi düzenleyicinin kullanılacağı belirtilir.\n"
+"    \t\tÖntanımlısı FCEDIT ardından EDITOR ve vi'dir.\n"
+"       -l\tile komutlar stardart çıktıya listelenir.\n"
+"       -n\tile listede satır numaraları bulunmaz.\n"
+"       -r\tile komutlar ters sırada (en yeniler listesi olarak) listelenir\n"
+"    \n"
+"    `fc -s [ESKİ=YENİ] [KOMUT]' biçiminde,  ESKİ=YENİ ikamesi yapıldıktan\n"
+"    sonra komut yeniden çalıştırılır.\n"
+"    \n"
+"    Bununla kullanılacak yararlı bir rümuz r='fc -s' olurdu.\n"
+"    Böylece `r cc' yazarak `cc' ile başlayan son komut,\n"
+"    r' yazarak en son komut çalıştırılabilir.\n"
+"    \n"
+"    Çıktı Durumu:\n"
+"    Başarılı veya çalıştırılan komut durumu döndürülür; hata oluştuğunda "
+"sıfır harici değer döner."
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"İşi ön plana taşı.\n"
+"    \n"
+"    İŞ_BELİRTİMİni önalana yerleştirir ve onu o an ki iş yapar.\n"
+"    EÄŸer Ä°Åž_BELÄ°RTÄ°MÄ° belirtilmemiÅŸse kabuk iÅŸ belirtimi olarak\n"
+"    o an ki işi kullanır.\n"
+"    \n"
+"    Çıktı Durumu:\n"
+"    Ön plana yerleştirilmiş komutun durumu veya hata olduğunda başarısız."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"İşi arkaplana taşı.\n"
+"    \n"
+"    `&' ile başlatılmışçasına İŞ_BELİRTİMİni artalana yerleştirir.\n"
+"    Ä°Åž_BELÄ°RTÄ°MÄ° verilmemiÅŸse, iÅŸ belirtimi olarak o an ki iÅŸ "
+"kullanılır.     \n"
+"    Çıktı Durumu:\n"
+"    İş kontrolü etkin olmadığı veya bir hata oluşmadığı sürece başarılı "
+"döner."
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+
+#: builtins.c:818
+#, fuzzy
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Dahili komutlar hakkında bilgi görüntüle.\n"
+"    \n"
+"    Dahili komutların özetlerini görüntüler. Eğer DESEN belirtilmişse,\n"
+"    DESEN ile eşleşen tüm komutlar hakkında ayrıntılı bilgi verir, aksi\n"
+"    halde, yardım konuları yazdırılır.\n"
+"    \n"
+"    Seçenekler:\n"
+"      -d\ther konu için kısa açıklama yazdır\n"
+"      -m\tkullanımı pseudo-man sayfası biçiminde yazdır\n"
+"      -s\tsadece DESEN ile eşleşen konular için kısa kullanım\n"
+"    \t\tbilgisi yazdır\n"
+"    \n"
+"    Argümanlar:\n"
+"      DESEN\tBir yardım konusunu belirten desen\n"
+"    \n"
+"    Çıktı Durumu:\n"
+"    DESEN bulunmadığı veya geçersiz bir seçenek verilmediğinde başarılı "
+"döner."
+
+#: builtins.c:842
+#, fuzzy
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Geçmiş listesini görüntüle veya düzenle.\n"
+"    \n"
+"    Seçeneksiz kullanıldığında komut geçmişi listesini satır numaraları ile\n"
+"    gösterir. Değişiklik yapılmış satırlarda numaralardan önce bir `*'\n"
+"    vardır. Argüman olarak N belirtildiğinde sadece son N satır listelenir.\n"
+"    \n"
+"    Seçenekler:\n"
+"      -c\tkomut geçmişi listesini tüm girdilerini silerek temizler.\n"
+"      -d\tile konumu KONUM olan geçmiş girdisi silinir.\n"
+"    \n"
+"      -a\tile oturumunun başlangıcından itibaren girilen geçmiş satırları\n"
+"    \tgeçmiş dosyasına eklenir.\n"
+"      -n\tile geçmiş dosyasından henüz okunmamış olan geçmiş satırları okur\n"
+"    \t\tve geçmiş listesine ekler\n"
+"      -r\tile dosya okunur ve içeriği geçmiş listesine eklenir.\n"
+"      -w\tile geçmiş listesi çıktısı geçmiş dosyasına yazılır.\n"
+"    \n"
+"      -p\ther ARGümanda geçmiş açılımı yap ve sonucu geçmiş listesinde\n"
+"    \tdepolamadan görüntüle\n"
+"      -s\tARGümanları geçmiş listesine tek bir girdi olarak ekle\n"
+"    \n"
+"    DOSYAÄ°SMÄ° verilmezse, HISTFILE deÄŸiÅŸkenindeki deÄŸer, o da yoksa\n"
+"    ~/.bash_history dosyası kullanılır.\n"
+"    \n"
+"    HISTTIMEFORMAT kabuk değişkeni tanımlanmış ve  anlamlı  bir  değere\n"
+"    sahipse, değeri, gösterilen her geçmiş girdisi ile ilişkili zaman\n"
+"    damgasını basacak olan strftime(3) işlevine biçim girdisi olur; aksi\n"
+"    takdirde hiç zaman damgası basılmaz.     \n"
+"    Çıktı Durumu:\n"
+"    Geçersiz bir seçenek girilmediği veya bir hata oluşmadığı takdirde "
+"başarılı döner."
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"Görev durumlarını görüntüle.\n"
+"    \n"
+"    Etkin işleri listeler. İŞ_BELİRTİMİ bu çıktıya çıktıyı kısıtlar.\n"
+"    Seçenekler olmadan, tüm etkin görev durumları görüntülenir.\n"
+"    \n"
+"    Seçenekler:\n"
+"      -l\tile normal bilgilere ek olarak süreç kimliklerini de (PID) "
+"listele\n"
+"      -n\tile sadece kullanıcının durumları hakkında aldığı son uyarıdan\n"
+"    \t\tberi durumları değişen işler hakkında bilgi gösterir.\n"
+"      -p\tile işlerin sadece süreç kimliklerini listeler\n"
+"      -r\tile sadece çalışmakta olan,\n"
+"      -s\tile ise sadece durmuÅŸ olan iÅŸler listelenir.\n"
+"    \n"
+"    -x  seçeneği verilmişse, ARGümanlar ile belirtilen tüm iş belirtimleri,\n"
+"    işlerin süreç grup liderinin süreç grup kimliğine yerleştirilip KOMUT\n"
+"    çalıştırılır.\n"
+"    \n"
+"    Çıktı Durumu:\n"
+"    Geçersiz bir seçenek girilmediği veya bir hata oluşmadığı takdirde "
+"başarılı döner.\n"
+"    -x kullanılmışsa, KOMUTun çıkış durumu döndürülür."
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"Görevleri geçerli kabuktan kaldır.\n"
+"    \n"
+"    Her İŞTANIMı argümanını etkin görevler tablosundan kaldırır. İŞTANIMı "
+"olmadan,\n"
+"    kabuk geçerli görev kavramını kullanır.\n"
+"    \n"
+"    Seçenekler:\n"
+"      -a\tİŞTANIMı belirtilmemişse tüm görevleri kaldır\n"
+"      -h\ther İŞTANIMını işaretle, böylece kabul bir SIGHUP aldığında göreve "
+"SIGHUP\n"
+"    \t\tgönderme\n"
+"      -r\tsadece çalışan görevleri kaldırremove \n"
+"    \n"
+"    Çıkış Durumu:\n"
+"    Geçersiz bir seçenek veya İŞTANIMı girilmedikçe başarılı döner."
+
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Bir göreve sinyal gönder.\n"
+"    \n"
+"    PID ile belirtilen süreç kimliğine  veya  İŞ_BELİRTİMİ  ile  belirtilen\n"
+"    işin  sürecine  SİNYAL  veya SİNYALNUM ile belirtilen sinyali gönderir.\n"
+"    SİNYAL veya SİNYALNUM verilmezse öntanımlı olarak SIGTERM kullanılır.\n"
+"    \n"
+"    Seçenekler:\n"
+"      -s sig\tSÄ°NYAL bir sinyal\n"
+"      -n sig\tSİNYAL bir sinyal numarası\n"
+"      -l\t-l seçeneği ile sinyal isimleri listelenir.\n"
+"      \t\tArgümanlı -l seçeneğinde argümanların listelenecek\n"
+"      sinyal  isimlerinin  numaraları  olduğu  varsayılır.    \n"
+"      -L\t, -l anahtarının eş anlamlısıdır\n"
+"    Kill iki sebepten dolayı bir kabuk yerleşiğidir: süreç kimlikleri yerine "
+"iÅŸ\n"
+"    kimliklerinin kullanımını mümkün  kılar ve eğer oluşturabileceğiniz "
+"süreç\n"
+"    sayısı sınırını  aşarsanız  başka  bir  süreci  öldürecek bir süreci "
+"baÅŸlatmak\n"
+"    zorunda kalmazsınız.\n"
+"    \n"
+"    Çıktı Durumu:\n"
+"    Geçersiz bir seçenek belirtilmediği veya bir hata oluşmadığında başarılı "
+"döner."
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"Aritmetik ifadeleri deÄŸerlendir.\n"
+"    \n"
+"    Her ARG deÄŸerlendirilecek bir  aritmetik  ifadesidir.  DeÄŸerlendirme\n"
+"    sabit genişlikli tamsayılarla, taşma denetimi uygulanmaksızın yapılır,\n"
+"    sıfırla  bölme  bir  hata  olarak  bayraklanır ve onun için bir sinyal\n"
+"    kapanı vardır.  İşleçler için öncelikler ve çağrışımsallık ve değerler\n"
+"    C dilindeki ile  aynıdır.  Aşağıdaki  işleçler  eşit  öncelikli  işleç\n"
+"    düzeylerine göre öbeklenmiş ve azalan öncelikle listelenmişlerdir.\n"
+"    \n"
+"    \tid++  id--\tsonradan-arttırım ve sonradan-eksiltim\n"
+"    \t++id  --id\tönceden-arttırım ve önceden-eksiltim\n"
+"    \t-  +\t\ttek terimli eksi ve artı imi\n"
+"    \t!  ~\t\tmantıksal ve bitseviyesinde olumsuzlama\n"
+"    \t**\t\tüs imi\n"
+"    \t*  /  %\t\tçarpma, bölme, kalan\n"
+"    \t+  -\t\ttoplama, çıkarma\n"
+"    \t<< >>  \tbit seviyesinde sola ve sağa ötelemeler\n"
+"    \t<=  >=  <  >\tkarşılaştırmalar\n"
+"    \t==  !=\t\teÅŸitlik, eÅŸitsizlik\n"
+"    \t&\t\tbit seviyesinde VE\n"
+"    \t^\t\tbit seviyesinde ayrıcalıklı VEYA\n"
+"    \t|\tbit seviyesinde VEYA\n"
+"    \t&&\t\tmantıksal VE\n"
+"    \t||\t\tmantıksal VEYA\n"
+"    \tifade ? ifade : ifade\n"
+"    \t\t\tkoşullu üç terimlisi\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tatamalar\n"
+"    \n"
+"    Kabuk değişkenleri terim olarak kullanılabilir. İfade içinde değişken\n"
+"    ismi  değeriyle  değiştirilir  (sabit genişlikli tamsayıya zorlanır).\n"
+"    Bir kabuk değişkeni ifade içinde  kullanılırken  tamsayı  niteliğinin\n"
+"    etkinleÅŸtirilmesini gerektirmez.\n"
+"    \n"
+"    İşleçler öncelik sırasına göre değerlendirilir. Parantez içine alınmış\n"
+"    alt ifadeler öncelikle değerlendirilir. Bu nedenle parantez içine alma\n"
+"    işleçlerin önceliklerini arttırmak amacıyla kullanılabilir.\n"
+"    \n"
+"    Çıktı Durumu:\n"
+"    Son ifade'nin sonucu 0 ise dönüş durumu 1 dir, aksi takdirde 0 dır."
+
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"Bir kabuk fonksiyonundan dön.\n"
+"    \n"
+"    Bir fonksiyon veya kaynak betiğinin N ile belirtilen dönüş değeri ile\n"
+"    çıkmasına neden olur. N girilmezse, dönüş durumu fonksiyon veya\n"
+"    betikte çalıştırılmış en son komutun dönüş durumudur.\n"
+"    \n"
+"    Çıkış Durumu:\n"
+"    N veya kabul bir fonksiyon ya da betik çalıştırmıyorsa başarısız döner."
+
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"Kabuk seçenekleri ve konumsal parametrelerin değerlerini ata veya kaldır\n"
+"    \n"
+"    Kabuk nitelikleri veya konumsal parametre deÄŸerlerini deÄŸiÅŸtir veya\n"
+"    kabuk değişkenlerinin isim ve değerlerini görüntüle.\n"
+"    \n"
+"    Seçenekler:\n"
+"    -a  Müteakip komutların ortamına aktarılmak üzere değiştirilen veya\n"
+"        oluÅŸturulan iÅŸlev ve deÄŸiÅŸkenleri imler.\n"
+"    -b  Sonlandırılan artalan işlerin durumunun anında raporlanmasını "
+"saÄŸlar.\n"
+"    -e  Bir komut sıfırdan farklı bir çıkış durumu ile çıkarsa anında "
+"çıkar.\n"
+"    -f  Dosya ismi üretimini (globbing) iptal eder.\n"
+"    -h  Çalıştırmak için aranan komutları bulur ve yerlerini hatırlar "
+"(hash).\n"
+"    -k  Atama deyimleri şeklindeki tüm argümanları komut isminden önce\n"
+"        belirtmek yerine ortama yerleÅŸtirir.\n"
+"    -m  Ä°ÅŸ denetimi etkinleÅŸtirilir.\n"
+"    -n  Komutları okur ama onları çalıştırmaz.\n"
+"    -o seçenek-ismi\n"
+"        seçenek-ismi olarak aşağıdakilerden biri verildiğinde karşılığı\n"
+"        olan seçenekler kullanılmış olur:\n"
+"            allexport    -a ile aynı\n"
+"            braceexpand  -B ile aynı\n"
+"            emacs        emacs tarzı bir satır düzenleme arayüzü kullanılır\n"
+"            errexit      -e ile aynı\n"
+"            errtrace     -E ile aynı\n"
+"            functrace    -T ile aynı\n"
+"            hashall      -h ile aynı\n"
+"            histexpand   -H ile aynı\n"
+"            history      komut geçmişini etkinleştirir\n"
+"            ignoreeof    kabuk dosyasonu karakterine rastlanınca çıkmaz.\n"
+"            interactive-comments\n"
+"                         etkileşimli komutlarda görünecek açıklamalara\n"
+"                         izin verir.\n"
+"            keyword      -k ile aynı\n"
+"            monitor      -m ile aynı\n"
+"            noclobber    -C ile aynı\n"
+"            noexec       -n ile aynı\n"
+"            noglob       -f ile aynı\n"
+"            nolog        o an kabul edilir ama yoksayılır\n"
+"            notify       -b ile aynı\n"
+"            nounset      -u ile aynı\n"
+"            onecmd       -t ile aynı\n"
+"            physical     -P ile aynı\n"
+"            pipefail     bir boruhattının dönüş değeri ya sıfırdan farklı "
+"bir\n"
+"                         durumla çıkan son (en sağdaki) komutun değeridir "
+"ya\n"
+"                         da boruhattındaki tüm komutlar başarılıysa "
+"sıfırdır\n"
+"            posix        Standart uyumu için POSIX 1003.2 "
+"standardındakinden\n"
+"                         farklı öntanımlı işlemde Bash davranışını "
+"deÄŸiÅŸtirir\n"
+"            privileged   -p ile aynı\n"
+"            verbose      -v ile aynı\n"
+"            vi           vi tarzı bir satır düzenleme arayüzü kullanılır\n"
+"            xtrace       -x ile aynı\n"
+"    -p  Ayrıcalıklı kipi etkinleştirir. Bu kipte, $BASH_ENV ve $ENV "
+"dosyaları\n"
+"        işlenmez, kabuk işlevleri ortamdan miras alınmaz. Kabuk, gerçek\n"
+"        kullanıcı (grup) kimliği ile aynı olmayan etkin kullanıcı (grup)\n"
+"        kimliği ile başlatılmışsa ve -p seçeneği verilmemişse, bu eylemler\n"
+"        alınır ve etkin kullanıcı (grup) kimliği, gerçek kullanıcı (grup)\n"
+"        kimliğine ayarlanır. Başlatırken -p seçeneği verilmişse, etkin\n"
+"        kullanıcı (grup) kimliği sıfırlanmaz. Bu seçeneğin kapatılması "
+"etkin\n"
+"        kullanıcı ve grup kimliklerinin gerçek kullanıcı ve grup "
+"kimliklerine\n"
+"        ayarlanmasına sebep olur.\n"
+"    -t  Tek bir komutu okuyup çalıştırdıktan sonra çıkar..\n"
+"    -u  Parametre yorumlaması uygulanırken bir hata sonucu değişkenlerin\n"
+"        kaldırılmasına benzer bir davranış gösterir.\n"
+"    -v  Kabuk girdi satırlarını okunuyormuş gibi basar.\n"
+"    -x  Komutları ve argümanlarını çalıştırılıyormuş gibi basar.\n"
+"    -B  Kabuk kaşlı ayraç yorumlaması uygular.\n"
+"    -C  Çıktının > kullanılarak yönlendirilmesini ve <> kullanılarak mevcut\n"
+"        dosyaların üzerine yazılmasını engeller.\n"
+"    -E  Etkinse ERR üstündeki bir tuzak kabuk işlevlerince miras alınır.\n"
+"    -H  ! tarzı geçmiş ikamesini etkinleştirir. Bu seçenek etkileşimli\n"
+"        kabuklarda öntanımlı olarak etkindir.\n"
+"    -P  Verildiğinde, örneğin çalışılan dizini değiştirmek için cd gibi bir\n"
+"        komut sembolik bağları izlemez.\n"
+"    -T  Etkinse DEBUG ve RETURN üstündeki tuzaklar kabuk işlevlerince\n"
+"        miras alınır.\n"
+"    -- Geri kalan argümanları konumsal parametrelere ata. Eğer kalan\n"
+"       argüman yoksa, konumsal parametrelerin ataması kaldırılır.\n"
+"    -   Seçeneklerin sonunu belirtir. Kalan tüm argümanlar konumsal\n"
+"        parametrelere ayarlanır. -x ve -v seçenekleri kapatılır.\n"
+"\n"
+"    Seçeneklerdeki - işaretleri yerine + kullanıldığında bu seçenekler\n"
+"    kapatılır. Ayrıca, seçenekler kabuğun çağrılması sırasında da\n"
+"    kullanılabilir. Seçeneklerin mevcut listesi $- içinde bulunabilir.\n"
+"    Kalan N argüman konumsal parametrelerdir ve $1, $2, ... $N şeklinde\n"
+"    atanır. Özel parametre # ise N'e ayarlanır. Hiç argüman verilmezse,\n"
+"    tüm kabuk değişkenleri basılır.     \n"
+"    Çıktı Durumu:\n"
+"    Geçersiz seçenek belirtilmediği sürece başarılı döner."
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Geçerli kabukta bir dosyadan komut çalıştır.\n"
+"    \n"
+"    DOSYAİSMİndeki komutlar okunur ve çalıştırılır. DOSYAİSMİ içermiyorsa\n"
+"    DOSYAİSMİnin yerini bulmak için $PATH değişkeni kullanılır. Bash POSIX\n"
+"    kipinde değilse ve $PATH içinde DOSYAİSMİ yoksa bulunulan dizine "
+"bakılır.\n"
+"    Verilmiş ARGÜMANlar varsa, DOSYAİSMİ çalıştırılırken bunlar konumsal\n"
+"    parametreler haline gelir. Aksi takdirde, konumsal parametreler\n"
+"    deÄŸiÅŸtirilmez.\n"
+"    \n"
+"    Çıktı Durumu:\n"
+"    DOSYAİSMİnde çalıştırılan son komutun durumunu döndürür. DOSYAİSMİ\n"
+"    okunamazsa başarısız döner."
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"KoÅŸullu ifade deÄŸerlendir.\n"
+"    \n"
+"    İFADEnin değerlendirilmesine bağlı olarak 0 (doğru) veya 1 (yanlış)\n"
+"    durumu ile çıkar.  İfadeler tek terimli ya da iki terimli olabilir.\n"
+"    Tek terimli ifadeler çoğunlukla bir  dosyanın  durumunu  saptamakta\n"
+"    kullanılır.  Dizge  işleçleri ve sayısal karşılaştırma işleçleri de\n"
+"    vardır.\n"
+"    \n"
+"    Dosya işleçleri:\n"
+"    \n"
+"     -a DOSYA        DOSYA varsa doÄŸrudur.\n"
+"     -b DOSYA        DOSYA varsa ve bloka özelse doğrudur.\n"
+"     -c DOSYA        DOSYA varsa ve karaktere özelse doğrudur.\n"
+"     -d DOSYA        DOSYA varsa ve bir dizinse doÄŸrudur.\n"
+"     -e DOSYA        DOSYA varsa doÄŸrudur.\n"
+"     -f DOSYA        DOSYA varsa ve normal bir dosyaysa doÄŸrudur.\n"
+"     -g DOSYA        DOSYA varsa ve grup kimliÄŸi biti 1 ise doÄŸrudur.\n"
+"     -h DOSYA        DOSYA varsa ve bir sembolik baÄŸ ise doÄŸrudur.\n"
+"     -L DOSYA        DOSYA varsa ve bir sembolik baÄŸ ise doÄŸrudur.\n"
+"     -k DOSYA        DOSYA dosya varsa ve yapışkan biti 1 ise doğrudur.\n"
+"     -p DOSYA        DOSYA varsa ve bir isimli boru (FIFO) ise doÄŸrudur.\n"
+"     -r DOSYA        DOSYA varsa ve okuyabiliyorsanız doğrudur.\n"
+"     -s DOSYA        DOSYA varsa ve uzunluğu sıfırdan büyükse doğrudur.\n"
+"     -S DOSYA        DOSYA varsa ve bir soketse doÄŸrudur.\n"
+"     -t DSYTNT       DSYTNT açık ve bir uçbirime karşılıksa doğrudur.\n"
+"     -u DOSYA        DOSYA varsa ve kullanıcı kimliği biti 1 ise doğrudur.\n"
+"     -w DOSYA        DOSYA dosya varsa ve yazabiliyorsanız doğrudur.\n"
+"     -x DOSYA        DOSYA dosya varsa ve çalıştırabiliyorsanız doğrudur.\n"
+"     -O DOSYA        DOSYA varsa ve etkin sahibi sizseniz doÄŸrudur.\n"
+"     -G DOSYA        DOSYA varsa ve etkin grubu sizinkiyse doÄŸrudur.\n"
+"     -N DOSYA        DOSYA varsa ve son okunduÄŸundan beri deÄŸiÅŸtirilmiÅŸse\n"
+"                        doÄŸrudur.\n"
+"    \n"
+"     DOSYA1 -nt DOSYA2  dosya1, dosya2'den değişiklik tarihine göre\n"
+"                         daha yeni ise ya da dosya1 mevcutken dosya2 yoksa\n"
+"                         doÄŸrudur.\n"
+"    \n"
+"      DOSYA1 -ot DOSYA2  dosya1, dosya2 den daha eski ise ya da dosya2\n"
+"                         mevcutken dosya1 yoksa doÄŸrudur.\n"
+"    \n"
+"      DOSYA1 -ef DOSYA2  dosya1 ile dosya2 aynı aygıt ve aynı dosya "
+"düğümünü\n"
+"                         gösteriyorsa (ona sabit bağ ise) doğrudur.\n"
+"    \n"
+"    Dizge işleçleri:\n"
+"    \n"
+"        -z DİZGE           dizge uzunluğu sıfırsa doğrudur.\n"
+"    \n"
+"        -n DÄ°ZGE\n"
+"        DİZGE              dizge uzunluğu sıfırdan farklıysa doğrudur.\n"
+"    \n"
+"        DİZGE1 = DİZGE2    dizgeler aynıysa doğrudur.\n"
+"        DİZGE1 != DİZGE2   dizgeler aynı değilse doğrudur.\n"
+"        DİZGE1 < DİZGE2    dizge1 yerele göre sıralamada dizge2'den\n"
+"                           önceyse doğrudur.\n"
+"        DİZGE1 > DİZGE2    dizge1 yerele göre sıralamada dizge2'den\n"
+"                           sonraysa doÄŸrudur.\n"
+"    \n"
+"    Diğer işleçler:\n"
+"    \n"
+"        -o SEÇENEK         Kabuk seçeneği SEÇENEK etkinse doğrudur.\n"
+"      -v DEĞŞ         Kabuk DEĞŞ ayarlanmış ise true.\n"
+"      -R DEĞŞ         Kabuk DEĞŞ ayarlanmış ve bir isim referansı ise true\n"
+"        ! İFADE            İFADE yanlışsa doğrudur.\n"
+"        Ä°FADE1 -a Ä°FADE2   Ä°FADE1 ve Ä°FADE2 her ikisi de doÄŸruysa doÄŸrudur.\n"
+"        Ä°FADE1 -o Ä°FADE2   Ä°FADE1 veya Ä°FADE2 doÄŸruysa doÄŸrudur.\n"
+"    \n"
+"        arg1 İM arg2       Aritmetik sınamalar.  İM bunlardan biri "
+"olmalıdır:\n"
+"                           -eq, -ne, -lt, -le, -gt veya -ge.\n"
+"    \n"
+"    Bir aritmetik ifadede ARG1 ve ARG2 arasında, aranan eşitlik, "
+"eÅŸitsizlik,\n"
+"    küçüklük, büyüklük, küçüklük veya eşitlik, büyüklük veya eşitlik varsa\n"
+"    ifadenin sonucu doÄŸrudur.    \n"
+"    Çıktı Durumu:\n"
+"    Eğer İFADE true olursa başarılı, İFADE false ile sonuçlanırsa veya "
+"geçersiz\n"
+"    argümanda başarısız döner."
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Şartlı ifadeyi değerlendir.\n"
+"    \n"
+"    \"test\" yerleşiği ile aynıdır, fakat son argüman açan `[' ile eşleşen\n"
+"   kapatan `]' olmak zorundadır."
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"İşleme süresini görüntüle.\n"
+"    \n"
+"    Kabuk ve tüm alt süreçleri için kümülatif kullanıcı ve sistem süresini\n"
+"    yazdırır.\n"
+"    \n"
+"    Çıktı Durumu:\n"
+"    Her zaman başarılı döner."
+
+#: builtins.c:1364
+#, fuzzy
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"\rtrap [-lp] [ARG SÄ°NYAL ...]\n"
+"    ARGüman içindeki komutlar,  kabuk SİNYAL sinyalini aldığında okunur ve\n"
+"    çalıştırılır.  ARGüman verilmezse  (ve tek bir SİNYAL varsa) ya da `-'\n"
+"    verilirse, belirtilen tüm sinyallere kabuk başlatıldığındaki değerleri\n"
+"    yerleştirilir.  ARGüman bir boş dizge ise her  SİNYAL sinyali kabuk ve\n"
+"    onu çağıran komutlar tarafından yoksayılır.  Eğer SİNYAL  0 ya da EXIT\n"
+"    ise  ARGüman  kabuk  çıkarken  çalıştırılır.  Eğer SİNYAL olarak DEBUG\n"
+"    verilmişse, ARGüman komutu her basit komuttan  önce  çalıştırılır.  -p\n"
+"    seçeneği  verilmişse  trap,  her  SİNYAL ile ilişkili trap komutlarını\n"
+"    gösterir.  Hiç ARGüman verilmemişse veya sadece  -p  verilmişse,  trap\n"
+"    her  SİNYAL  ile  ilişkili  komutların listesini basar.  Her SİNYAL ya\n"
+"    <signal.h> dosyasındaki bir sinyal  ismi  ya da  bir  sinyal  numarası\n"
+"    olarak  verilmelidir.  Sinyal isimleri harf büyüklüğüne duyarsızdır ve\n"
+"    SIG öneki isteğe bağlıdır.   -l  seçeneği  kabuğun  sinyal  isimlerini\n"
+"    numaraları  ile  birlikte  listelemesini  sağlar.  Kabuğa  bir  sinyal\n"
+"    göndermek isterseniz \"kill -SİGNAL $$\" sözdizimini kullanabilirsiniz."
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+
+#: builtins.c:1431
+#, fuzzy
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Kabuk kaynak sınırlarını değiştir.\n"
+"    \n"
+"    Kabuk ve oluşturduğu süreçlere, izin veren sistemlerde mevcut kaynaklar\n"
+"    üzerinde denetim sağlar.\n"
+"    \n"
+"    Seçenekler:\n"
+"      -S\tYazılımsal (`soft') sınır kullanılır.\n"
+"      -H\tDonanımsal (`hard') sınır kullanılır.\n"
+"      -a\tMevcut tüm sınırlamalar gösterilir.\n"
+"      -c\tOluşan core dosyalarının azami boyu\n"
+"      -d\tBir sürecin veri segmanının azami boyu\n"
+"      -e\tAzami zamanlama önceliği (`nice')\n"
+"      -f\tKabuk ve çocukları tarafından oluşturulan dosyaların azami boyu\n"
+"      -i\tAskıdaki sinyallerin azami sayısı\n"
+"      -k\tBu süreç için ayrılmış kqueue'lerin azami sayısı\n"
+"      -l\tBelleÄŸe kilitlenebilen azami boyut\n"
+"      -m\tAzami bellek boyu\n"
+"      -n\tAçık dosya tanıtıcılarının azami sayısı\n"
+"      -p\tİletişim tüneli tamponunun boyu\n"
+"      -q\tPOSIX ileti kuyruklarındaki azami bayt miktarı\n"
+"      -r\tAzami anında çalıştırma zamanlaması önceliği\n"
+"      -s\tYığıtın azami boyu\n"
+"      -t\tİşlemci zamanının saniye cinsinden azami miktarı\n"
+"      -u\tTek bir kullanıcının kullanabileceği azami süreç sayısı\n"
+"      -v\tBir sürecin kullanabileceği sanal belleğin azami miktarı\n"
+"      -x\tDosya kilitlerinin azami sayısı\n"
+"      -T\tAzami iş parçacık sayısı\n"
+"    \n"
+"    Tüm seçenekler tüm platformlarda kullanılabilir olmayabilir.\n"
+"    \n"
+"    SINIR verilmişse, belirtilen özkaynağın yeni değeridir; özel sınır\n"
+"    değerleri mevcut donanımsal sınır için `hard', mevcut yazılımsal sınır\n"
+"    için `soft' ve sınırsız için `unlimited''dir. Aksi takdirde, belirtilen\n"
+"    özkaynak için mevcut değer gösterilir. Hiç seçenek verilmezse -f\n"
+"    seçeneği verilmiş kabul edilir.\n"
+"    \n"
+"    Değerler -t için saniye cinsinden, -p\n"
+"    için 512 baytlık blok sayısı olarak, -n ve -u için birimsiz, kalan\n"
+"    seçenekler için 1024 baytlık blok sayısı olarak belirtilmelidir.    \n"
+"    Çıktı Durumu:\n"
+"    Geçersiz bir seçenek girilmediği veya bir hata oluşmadığı takdirde "
+"başarılı döner."
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"Sürecin tamamlanmasını bekle ve çıkış durumunu döndür.\n"
+"    \n"
+"    Belirtilen süreci bekler ve sonlandırma durumunu raporlar. Eğer ID "
+"verilmemiÅŸse\n"
+"    geçerli tüm alt süreçler beklenir ve dönüş kodu sıfırdır. Eğer ID bir "
+"görev tanımıysa\n"
+"    görevin iletişim tünelindeki tüm süreçler beklenir.\n"
+"    \n"
+"    -n seçeneği verilirse, sonraki görevin sonlanması beklenir ve çıkış "
+"durumunı döndürür.\n"
+"    \n"
+"    Çıkış Durumu:\n"
+"    Kimlik durumunu döndürür, kimlik geçersizse veya geçersiz bir seçenek "
+"verilmiÅŸse\n"
+"    başarısız olur."
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"Sürecin tamamlanmasını bekle ve çıkış durumunu döndür.\n"
+"    \n"
+"    PID tarafından belirtilen her süreci bekler ve sonlandırma durumunu "
+"raporlar.\n"
+"    Eğer PID verilmemişse geçerli tüm alt süreçler beklenir ve dönüş kodu "
+"sıfırdır.\n"
+"    PID bir süreç kimliği olmalıdır.\n"
+"    \n"
+"    Çıkış Durumu:\n"
+"    Son PID'nin durumunu döndürür, PID geçersizse veya geçersiz bir seçenek "
+"verilmiÅŸse\n"
+"    başarısız olur."
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Bir listedeki her üye için komut çalıştır.\n"
+"    \n"
+"    `for' döngüsü bir öge listesindeki her üye için komut sırasını "
+"çalıştırır.\n"
+"    Eğer `in KELİMELER ...;' belirtilmemişse `in \"$@\"' varsayılır. "
+"KELÄ°MELER\n"
+"    içerisindeki her eleman için, İSİM bu elemana atanır ve KOMUTLAR "
+"çalıştırılır.\n"
+"    \n"
+"    Çıkış Durumu:\n"
+"    Son çalıştırılan komutun durumunu döndürür."
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Döngü için aritmetik.\n"
+"    \n"
+"    Åžuna eÅŸdeÄŸerdir:\n"
+"    \t(( Ä°FADE1 ))\n"
+"    \twhile (( Ä°FADE2 )); do\n"
+"    \t\tKOMUTLAR\n"
+"    \t\t(( Ä°FADE3 ))\n"
+"    \tdone\n"
+"    Ä°FADE1, Ä°FADE2 ve Ä°FADE3 aritmetik ifadelerdir. EÄŸer ifadelerden biri "
+"yoksa\n"
+"    1'e değerlendirilmiş şekilde davranır.\n"
+"    \n"
+"    Çıkış Durumu:\n"
+"    Son çalıştırılan komutun durumunu döndürür."
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Listeden kelimeleri seç ve komutları çalıştır.\n"
+"    \n"
+"    `SÖZ ...;'  listesi yorumlanarak öğe listesi üretilir.  Öğe "
+"listesindeki\n"
+"    her öğenin başına bir numara eklenerek standart hataya çıktılanır.  "
+"EÄŸer\n"
+"    `in SÖZ ... ;' parçası verilmezse, in \"$@\"' verilmiş gibi konuma "
+"bağlı\n"
+"    parametreler basılır ve  standart girdide PS3 istemi ile girdi "
+"beklenir.\n"
+"    Listede belirtilen numaralardan biri girdi  olarak  verilirse,  o "
+"konuma\n"
+"    bağlı SÖZcük ile AD eşleştirilir.  Girdi satırı boş verilirse, "
+"dosyasonu\n"
+"    okununcaya kadar komut istemi tekrarlanır. Listede belirtilenler "
+"dışında\n"
+"    verilen  her değer için  AD  null ile eşleştirilir.  Okunan satır "
+"$REPLY\n"
+"    değişkeninde tutulur. Her seçimden sonra bir break komutu ile\n"
+"    sonlandırılıncaya kadar komutlar çalıştırılır.\n"
+"    \n"
+"    Çıktı Durumu:\n"
+"    Son çalıştırılan komutun durumunu döndürür."
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"Veriyolu çalıştırması tarafından harcanan zamanı bildir.\n"
+"    \n"
+"    VERİYOLUnu çalıştır ve sonlandığında kullanıcı işlemci zamanı ile "
+"sistem\n"
+"    işlemci zamanını içeren gerçek zamanın bir özetini yazdır.\n"
+"    \n"
+"    Seçenekler:\n"
+"      -p\ttaşınabilir Posix biçiminde zaman özetini yaz\n"
+"    \n"
+"    ZAMANBİÇİMİ değişkeninin değeri çıktı biçimi olarak kullanılır.\n"
+"    \n"
+"    Çıktı Durumu:\n"
+"    VERİYOLU döndürme değerini döndürür."
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Kalıp eşleştirme tabanlı komutları çalıştır.\n"
+"    \n"
+"    SÖZcük ile eşleşen ilk KALIP'a karşı düşen KOMUTLARı çalıştırır.\n"
+"    `|' çok sayıda kalıbı ayırmak için kullanılır.\n"
+"    \n"
+"    Çıkış Durumu:\n"
+"    Son çalıştırılan komutun durumunu döndürür."
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Komutları şartlara göre çalıştırır.\n"
+"    \n"
+"    `if KOMUTlar;' listesi çalıştırılır; çıkış durumu sıfırsa\n"
+"    `then KOMUTlar;' listesi çalıştırılır,  değilse  `elif KOMUTlar;'\n"
+"    listesi çalıştırılır; bunun çıkış durumu sıfırsa `then KOMUTlar;'\n"
+"    listesi çalıştırılır  ve  if komutu tamamlanır,  değilse varsa\n"
+"    `else KOMUTlar;' listesi çalıştırılır ve if komutu tamamlanır.\n"
+"    Oluşumun tamamının dönüş durumu çalıştırılmış olan son komutun\n"
+"    çıkış durumudur.  Bir komut çalıştırılmamışsa  ve hiçbir koşul\n"
+"    doğru sonuç vermemişse sıfır döner.     Çıkış Durumu:\n"
+"    Son çalıştırılan komutun durumunu döndürür."
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Testler başarılı olduğu sürece komutları çalıştırır.\n"
+"    \n"
+"    KOMUTLARı, `while' KOMUTLARı sıfır çıktı durumuna sahip oluncaya\n"
+"    kadar genişlet ve çalıştır.\n"
+"    \n"
+"    Çıktı Durumu:\n"
+"    En son çalıştırılan komutun durumunu döndürür."
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Bir sınama başarısız oluncaya kadar komutları çalıştır.\n"
+"    \n"
+"    `until KOMUTlar; listesinin çıkış durumu sıfırdan farklı olduğu sürece\n"
+"    `do KOMUTlar;' listesi çalıştırılır.\n"
+"    \n"
+"    Çıktı Durumu:\n"
+"    Son çalıştırılan komutun durumunu döndürür."
+
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Komutları bir birim olarak grupla.\n"
+"    \n"
+"    KOMUTlar bir grup olarak çalıştırılır. Bu, bir komut kümesini bir\n"
+"    yönlendirmede kullanmanın tek yoludur.\n"
+"    \n"
+"    Çıktı Durumu:\n"
+"    Son çalıştırılan komutun durumunu döndürür."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"Göreve ön planda devam et.\n"
+"    \n"
+"    `fg'  komutunu  İŞ_BELİRTİMİ  argümanı ile kullanmaya  eşdeğerdir.\n"
+"    Durmuş  veya  artalandaki bir işin önalanda sürdürülmesini sağlar.\n"
+"    İŞ_BELİRTİMİ  bir iş ismi veya  iş numarası olarak belirtilebilir.\n"
+"    İŞ_BELİRTİMİ'nden sonra bir & gelmesi işin `bg' komutununa argüman\n"
+"    olarak kullanılmış gibi artalana yerleştirilmesine sebep olur.\n"
+"    \n"
+"    Çıktı Durumu:\n"
+"    Devam edilen görevin durumunu döndürür."
+
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Aritmetik ifadeyi deÄŸerlendir.\n"
+"    \n"
+"    Verilen aritmetik İFADE aritmetik değerlendirme kurallarına göre\n"
+"    deÄŸerlendirilir. \"let Ä°FADE\" ile eÅŸdeÄŸerdir.\n"
+"    \n"
+"    Çıktı Durumu:\n"
+"    İFADE 0 olursa 1; aksi takdirde 0 döndürür."
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"Koşullu komut çalıştır.\n"
+"     \n"
+"    Koşullu İFADEnin değerine bağlı olarak 0 ya da 1 durumu ile döner.\n"
+"    İfadeler  test yerleşiği tarafından kullanılan aynı ilkelerle "
+"oluÅŸturulur\n"
+"    ve aşağıdaki işleçler kullanılarak biraraya getirilebilirler:\n"
+"\n"
+"        ( İFADE )         İFADEnin değeri döner\n"
+"        ! İFADE           İFADE yanlışsa doğru, doğruysa yanlıştır.\n"
+"        Ä°FADE1 && Ä°FADE2  Ä°FADE1 ve Ä°FADE2 her ikisi de doÄŸruysa doÄŸrudur\n"
+"        Ä°FADE1 || Ä°FADE2  Ä°FADE1 veya Ä°FADE2 doÄŸruysa doÄŸrudur\n"
+"\n"
+"    `==' ve `!='  işleçleri kullanıldığında, işlecin sağındaki dizge bir "
+"kalıp\n"
+"   olarak ele alınır ve kalıp eşleştirmesi uygulanır. `=~'  kullanıldığında\n"
+"   işlecin sağındaki dizge düzenli ifade olarak eşleştirilir.     \n"
+"    İFADE1, ifadenin değeri için tek başına yeterli ise && ve || İFADE2'yi\n"
+"    çalıştırmaz.\n"
+"    \n"
+"    Çıkış Durumu:\n"
+"    İFADE değerine göre 0 veya 1."
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"Bazı değişkenler ve anlamları:\n"
+"    \n"
+"    BASH_VERSION\tBu Bash'in sürüm bilgisi.\n"
+"    CDPATH\t`cd'ye argüman olarak verilecek dizinlerin aranacağı\n"
+"    \t\tdizinlerin iki nokta imi ayraçlı listesi.\n"
+"    GLOBIGNORE\tDosyayolu yorumlaması tarafından yoksayılacak dosya\n"
+"    \t\tisimlerini belirten kalıpların ikinokta imi ayraçlı\n"
+"    \t\tlistesi.\n"
+"    HISTFILE\tKomut geçmişinizin saklanacağı dosyanın ismi.\n"
+"    HISTFILESIZE\tBu dosyanın içerebileceği azami satır sayısı.\n"
+"    HISTSIZE\tÇalışan bir kabuğun erişebileceği geçmiş satırlarının\n"
+"    \t\tazami sayısı.\n"
+"    HOME\tKullanıcının ev dizininin tam yolu.\n"
+"    HOSTNAME\tMakinenizin aÄŸdaki konak ismi.\n"
+"    HOSTTYPE\tBash'in bu sürümünün altında çalıştığı işlemcinin türü\n"
+"    IGNOREEOF\tTek girdi olarak EOF karakteri alındığında kabuğun\n"
+"    \t\teylemini kontrol eder. Atandığında değeri, kabuk\n"
+"    \t\tçıkmadan önce bir girdi satırındaki ilk karakter\n"
+"    \t\tolarak okunabilen ardışık EOF karakterlerinin sayısını\n"
+"    \t\tgösterir (öntanımlı 10). Eğer değişken mevcut değilse,\n"
+"    \t\tEOF girdi sonunu belirtir.\n"
+"    MACHTYPE\tBash'in üzerinde çalıştığı sistemi açıklayan dizge.\n"
+"    MAILCHECK\tBash'in yeni postaya kaç saniyede bir bakacağı.\n"
+"    MAILPATH\tBash'in yeni posta var mı diye bakacağı dosya\n"
+"    \t\tisimlerinin ikinokta imi ayraçlı listesi.\n"
+"    OSTYPE\tBash'in üzerinde çalıştığı çekirdeğin türü.\n"
+"    PATH\tKomutları ararken bakılacak dizinlerin ikinokta imi\n"
+"    \t\tayraçlı listesi.\n"
+"    PROMPT_COMMAND\tBirincil komut istemi ($PS1) basılmadan önce\n"
+"    \t\tçalıştırılacak komut\n"
+"    PS1\tBirincil komut istemi dizgesi.\n"
+"    PS2\tÄ°kincil komut istemi dizgesi.\n"
+"    PWD\tÇalışma dizininizin tam yolu.\n"
+"    SHELLOPTS\tEtkin kabuk seçeneklerinin ikinokta imi ayraçlı listesi\n"
+"    TERM\tGeçerli uçbirim türünün ismi.\n"
+"    TIMEFORMAT\ttime anahtar sözcüğü ile başlayan zamanlama bilgisinin\n"
+"    \t\tnasıl belirtileceğini gösteren biçim dizgesi.\n"
+"    auto_resume\tDeğerin boş olmaması durmuş işin isminin onu\n"
+"    \t\tbaşlatmakta kullanılan komut satırı olduğudur ve\n"
+"    \t\toradaysa iş önalana alınır. `exact' değeri, komut\n"
+"    \t\tsözcüğünün durmuş işler listesindeki komutla tam\n"
+"    \t\tolarak eşleşmesi gerektiği anlamına gelir. `substring'\n"
+"    \t\tdeğeri, komut sözcüğünün işin bir altdizgesi ile\n"
+"    \t\teşleşmesi gerektiğini belirtir. Bunlar dışında bir\n"
+"    \t\tdeğer komutun durmuş bir işe önek olması gerektiği\n"
+"    \t\tanlamına gelir.\n"
+"    histchars\tGeçmiş yorumlaması, hızlı ikame ve sembolleştirmeyi\n"
+"    \t\tdenetleyen en çok üç karakter. İlk karakter geçmiş\n"
+"    \t\tyorumlamasının başlatılmasını sağlayan geçmiş\n"
+"    \t\tyorumlama karakteridir ve normalde ! iÅŸaretidir.\n"
+"    \t\tİkinci karakter, bir satırdaki ilk karakter olduğunda\n"
+"    \t\t`hızlı ikame'yi imleyen karakterdir ve normalde ^\n"
+"    \t\timidir. İstemlik olan üçüncü karakter ise, bir\n"
+"    \t\tsözcüğün ilk karakteri olarak bulunduğunda satırın\n"
+"    \t\tkalanının açıklama olmasını sağlayan karakterdir ve\n"
+"    \t\tnormalde # imidir.\n"
+"    HISTIGNORE\tGeçmiş listesine hangi satırların kaydedilmesi\n"
+"    \t\tgerektiğine karar vermek için kullanılan kalıpların\n"
+"    \t\tikinokta imi ayraçlı listesi.\n"
+
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Dizinleri yığına ekle.\n"
+"    \n"
+"    Dizin yığıtının en üstüne bir dizin ekler, ya da geçerli çalışma\n"
+"    dizini yığıtın tepesine gelecek  şekilde  yığıtı  döndürür.  Hiç\n"
+"    argüman verilmemişse en üstteki iki dizini yer değiştirir.\n"
+"    \n"
+"    Seçenekler:\n"
+"      -n\tdizinleri yığıta eklerken normal dizin değişikliğini engeller,\n"
+"    \t\tböylece sadece yığıt değiştirilmiş olur.\n"
+"    \n"
+"    Argümanlar:\n"
+"      +N\t(`dirs' tarafından gösterilen listenin solundan saymaya\n"
+"    \t\tsıfırla başlandığında) N'inci dizin tepeye gelecek şekilde\n"
+"    \t\tyığıtı döndürür.\n"
+"    \n"
+"      -N\t(`dirs' tarafından gösterilen listenin sağından saymaya\n"
+"    \t\tsıfırla başlandığında) N'inci dizin tepeye gelecek şekilde\n"
+"    \t\tyığıtı döndürür.\n"
+"    \n"
+"    dizin\tDİZİNi yeni çalışma dizini yaparak dizin yığıtının\n"
+"    \t\ttepesine ekler.\n"
+"    \n"
+"    Dizin yığıtını `dirs' komutuyla görebilirsiniz.\n"
+"    \n"
+"    Çıkış Durumu:\n"
+"    Geçersiz bir argüman belirtilmediği veya dizin değişikliği başarısız\n"
+"    olmadıkça başarılı döner."
+
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Dizin yığıtından girdileri sil.\n"
+"    \n"
+"    Dizin yığıtından girdileri siler.  Hiç argüman verilmemişse,\n"
+"    yığıtın en üstündeki dizini  yığıttan  kaldırır  ve  yığıtın\n"
+"    tepesinde kalan dizine geçer. \n"
+"    \n"
+"    Seçenekler:\n"
+"      -n\tdizinleri yığıttan silerken normal dizin değişikliğini\n"
+"    \t\tengeller, böylece sadece yığıt değiştirilmiş olur. \n"
+"    \n"
+"    Argümanlar:\n"
+"      +N\t\t`dirs' tarafından gösterilen listenin solundan saymaya\n"
+"    \t\tsıfırla başlandığında N'inci girdiyi  siler.  Örneğin,\n"
+"    \t\t`popd +0' ilk dizini `popd +1' ikincisini siler. \n"
+"    \n"
+"      -N\t\t`dirs' tarafından gösterilen listenin sağından saymaya\n"
+"    \t\tsıfırla başlandığında N'inci girdiyi  siler.  Örneğin,\n"
+"    \t\t`popd -0' son dizini `popd -1' sonuncudan öncekini siler. \n"
+"    \n"
+"    Dizin yığıtını `dirs' komutuyla görebilirsiniz.    \n"
+"    Çıkış Durumu:\n"
+"    Geçersiz bir argüman belirtilmediği veya dizin değişikliği başarısız\n"
+"    olmadıkça başarılı döner."
+
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Dizin yığıtını görüntüle.\n"
+"    \n"
+"    O an anımsanan dizinleri listeler.  Dizinler listeye `pushd'\n"
+"    komutuyla eklenir; listeden tek tek geri almak içinse `popd'\n"
+"    komutu kullanılır.\n"
+"    \n"
+"    Seçenekler:\n"
+"      -c\ttüm girdileri silerek dizin yığıtını boşaltır.\n"
+"      -l\t`dirs'in dizinleri ev dizininize göreli kısayollar\n"
+"    \t\tolarak göstermemesine yol açar.\n"
+"      -p\tyığıttaki konumu göstermemesi dışında aynı çıktıyı verir.\n"
+"      -v\t`dirs'in dizin yığıtını dizin adının önüne yığıt konumunu\n"
+"    \t\tekleyerek her satırda bir girdi göstermesini sağlar.\n"
+"    \n"
+"    Argümanlar:\n"
+"      +N\tdirs seçeneksiz çağrıldığında gösterdiği listenin solundan\n"
+"    \t\tsıfırla başlayarak sayılan N'inci girdiyi gösterir.\n"
+"    \n"
+"    \n"
+"      -N\tdirs seçeneksiz çağrıldığında gösterdiği listenin sağından\n"
+"    \t\tsıfırla başlayarak sayılan N'inci girdiyi gösterir.\n"
+"    \n"
+"    Çıkış Durumu:\n"
+"    Geçersiz seçenek belirtilmediği veya bir hata oluşmadığı sürece başarılı "
+"döner."
+
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"BİÇİMin  denetimi  altında  ARGümanları  standart  çıktıya biçimleyerek "
+"yazar\n"
+"    \n"
+"    Seçenekler:\n"
+"      -v değişken\tseçeneği çıktının standart çıktıya\n"
+"    \t\tbasılması yerine DEĞİŞKENe atanmasını sağlar.\n"
+"    \n"
+"    BİÇİM  üç  tür  nesne  içeren  bir  dizgedir:  salt  karakterler\n"
+"    basitçe    standart    çıktıya   kopyalanır,   öncelenmiş   karakterler\n"
+"    dönüştürülüp  standart  çıktıya  kopyalanır  ve   biçim   belirtimleri;\n"
+"    belirtimlerin  her  biri  sırayla  karşı düşen ARGümanların basılmasını\n"
+"    saÄŸlar.\n"
+"    \n"
+"    Standart printf(1) biçimlerine ek olarak, printf aşağıdakileri de "
+"yorumlar:\n"
+"    \n"
+"      %b\ttersbölü öncelemeli karakterlerin karşı düşen ARGümanda "
+"yorumlanmasını sağlar\n"
+"      %q\tARGümanın kabuk girdisi olarak kullanılabilecek biçimde "
+"kullanılabilmesi\n"
+"    \t\tiçin alıntılar.\n"
+"      %(fmt)T\tstrftime(3) için bir biçim dizgesi olarak FMT tarafından "
+"kullanılmak üzere\n"
+"    \t\ttarih zaman dizgesi çıktısısı verir\n"
+"    \n"
+"    Biçim argümanların tümünün kullanılabilmesi için gerektiğinde yeniden "
+"kullanılır.\n"
+"    Biçimin gerektirdiğinden daha az argüman varsa, ek biçim tanımlamaları "
+"uygun olduÄŸu\n"
+"    şekilde sıfır değeri veya BOŞ (null) dizge değeri olarak davranırlar.\n"
+"    \n"
+"    Çıkış Durumu:\n"
+"    Geçersiz bir seçenek belirtilmediği veya yazılmadığı takdirde ya da bir "
+"atama\n"
+"    hatası oluşmadığı sürece başarılı döner."
+
+#: builtins.c:1971
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Seçeneklere bağlı olarak olası tamamlamaları gösterir.\n"
+"    \n"
+"    Olası tamamlamaları üretmek üzere bir kabuk işlevinin içinde kullanmak\n"
+"    amacıyla tasarlanmıştır. İsteğe bağlı SÖZCÜK argümanı sağlandığı\n"
+"    takdirde eşleşmelerden sadece SÖZCÜK ile eşleşenler üretilir.\n"
+"    \n"
+"    Çıktı Durumu:\n"
+"    Geçersiz bir seçenek girilmediği veya bir hata oluşmadığı takdirde "
+"başarılı döner."
+
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Bir dosyadaki satırları bir dizi değişkenine oku.\n"
+"    \n"
+"    `mapfile' ile eşanlamlıdır."
+
+#, fuzzy
+#~ msgid "Copyright (C) 2019 Free Software Foundation, Inc."
+#~ msgstr "Telif Hakkı (C) 2016 Özgür Yazılım Vakfı A.Ş."
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "Geçerli altyordam çağrısının bağlamı döndürür.\n"
+#~ "    \n"
+#~ "    İFADE olmadan, şu döner "
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process: %5ld (%s) süreci iletişim_tünelinde"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "Bilinmeyen Sinyal #"
+
+#~ msgid ":"
+#~ msgstr ":"
+
+#~ msgid "true"
+#~ msgstr "true"
+
+#~ msgid "false"
+#~ msgstr "false"
+
+#~ msgid "times"
+#~ msgstr "times"
+
+#~ msgid "Copyright (C) 2009 Free Software Foundation, Inc.\n"
+#~ msgstr "Telif Hakkı (C) 2009 Free Software Foundation, Inc.\n"
+
+#~ msgid ""
+#~ "License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl."
+#~ "html>\n"
+#~ msgstr ""
+#~ "Lisans GPLv2+: GNU GPL sürüm 2 veya sonrası <http://gnu.org/licenses/gpl."
+#~ "html>\n"
+
+#~ msgid " "
+#~ msgstr " "
+
+#~ msgid "Without EXPR, returns returns \"$line $filename\".  With EXPR,"
+#~ msgstr "İFADE olmaksızın \"$line $filename\" döner. İFADE ile ise"
+
+#~ msgid "returns \"$line $subroutine $filename\"; this extra information"
+#~ msgstr "\"$line $subroutine $filename\" döner; bu ek bilgi"
+
+#~ msgid "can be used used to provide a stack trace."
+#~ msgstr "bir yığıt izini sürmek için kullanılabilir."
+
+#~ msgid ""
+#~ "The value of EXPR indicates how many call frames to go back before the"
+#~ msgstr ""
+#~ "İFADE değeri şu ankinden önce kaç çağrı çerçevesinin geri döneceğini"
+
+#~ msgid "current one; the top frame is frame 0."
+#~ msgstr "belirtir; tepe çerçeve 0. çerçevedir."
+
+#~ msgid "%s: invalid number"
+#~ msgstr "%s: sayı geçersiz"
+
+#~ msgid "Shell commands matching keywords `"
+#~ msgstr "Bu anahtar sözcüklere uygun kabuk komutları: `"
+
+#~ msgid "Display the list of currently remembered directories.  Directories"
+#~ msgstr ""
+#~ "\rdirs [-clpv] [+N] [-N]\n"
+#~ "    O an anımsanan dizinleri listeler.  Dizinler listeye"
+
+#~ msgid "find their way onto the list with the `pushd' command; you can get"
+#~ msgstr "`pushd' komutuyla eklenir; listeden tek tek geri almak içinse"
+
+#~ msgid "back up through the list with the `popd' command."
+#~ msgstr "`popd' komutu kullanılır."
+
+#~ msgid ""
+#~ "The -l flag specifies that `dirs' should not print shorthand versions"
+#~ msgstr "-l seçeneği `dirs'in dizinleri ev dizininize göreli kısayollar"
+
+#~ msgid ""
+#~ "of directories which are relative to your home directory.  This means"
+#~ msgstr ""
+#~ "olarak göstermemesine yol açar.  Yani `~/bin' yerine `/homes/bfox/bin'"
+
+#~ msgid "that `~/bin' might be displayed as `/homes/bfox/bin'.  The -v flag"
+#~ msgstr "gibi bir gösterimle karşılaşabilirsiniz. -v seçeneği `dirs'in"
+
+#~ msgid "causes `dirs' to print the directory stack with one entry per line,"
+#~ msgstr "dizin yığıtını dizin adının önüne yığıt konumunu ekleyerek her"
+
+#~ msgid ""
+#~ "prepending the directory name with its position in the stack.  The -p"
+#~ msgstr "satırda bir girdi göstermesini sağlar. -p seçeneği yığıttaki"
+
+#~ msgid "flag does the same thing, but the stack position is not prepended."
+#~ msgstr "konumu göstermemesi dışında aynı çıktıyı verir."
+
+#~ msgid ""
+#~ "The -c flag clears the directory stack by deleting all of the elements."
+#~ msgstr "-c seçeneği tüm girdileri silerek dizin yığıtını boşaltır."
+
+#~ msgid ""
+#~ "+N   displays the Nth entry counting from the left of the list shown by"
+#~ msgstr "+N   dirs seçeneksiz çağrıldığında gösterdiği listenin solundan"
+
+#~ msgid "     dirs when invoked without options, starting with zero."
+#~ msgstr "     sıfırla başlayarak sayılan N'inci girdiyi gösterir."
+
+#~ msgid ""
+#~ "-N   displays the Nth entry counting from the right of the list shown by"
+#~ msgstr "-N   dirs seçeneksiz çağrıldığında gösterdiği listenin sağından"
+
+#~ msgid "Adds a directory to the top of the directory stack, or rotates"
+#~ msgstr "Dizin yığıtının en üstüne bir dizin ekler, ya da geçerli çalışma"
+
+#~ msgid "the stack, making the new top of the stack the current working"
+#~ msgstr "dizini yığıtın tepesine gelecek şekilde yığıtı döndürür."
+
+#~ msgid "directory.  With no arguments, exchanges the top two directories."
+#~ msgstr "Hiç argüman verilmemişse en üstteki iki dizini yer değiştirir."
+
+#~ msgid "+N   Rotates the stack so that the Nth directory (counting"
+#~ msgstr "+N   (`dirs' tarafından gösterilen listenin solundan saymaya"
+
+#~ msgid "     from the left of the list shown by `dirs', starting with"
+#~ msgstr "     sıfırla başlandığında) N'inci dizin tepeye gelecek şekilde"
+
+#~ msgid "     zero) is at the top."
+#~ msgstr "     yığıtı döndürür."
+
+#~ msgid "-N   Rotates the stack so that the Nth directory (counting"
+#~ msgstr "-N   (`dirs' tarafından gösterilen listenin sağından saymaya"
+
+#~ msgid "     from the right of the list shown by `dirs', starting with"
+#~ msgstr "     sıfırla başlandığında) N'inci dizin tepeye gelecek şekilde"
+
+#~ msgid "-n   suppress the normal change of directory when adding directories"
+#~ msgstr "+n   dizinleri yığıta eklerken normal dizin değişikliğini engeller,"
+
+#~ msgid "     to the stack, so only the stack is manipulated."
+#~ msgstr "     böylece sadece yığıt değiştirilmiş olur."
+
+#~ msgid "dir  adds DIR to the directory stack at the top, making it the"
+#~ msgstr "dir  DİZİNi yeni çalışma dizini yaparak dizin yığıtının"
+
+#~ msgid "     new current working directory."
+#~ msgstr "     tepesine ekler."
+
+#~ msgid "You can see the directory stack with the `dirs' command."
+#~ msgstr "Dizin yığıtını `dirs' komutuyla görebilirsiniz."
+
+#~ msgid "Removes entries from the directory stack.  With no arguments,"
+#~ msgstr "Dizin yığıtından girdileri siler.  Hiç argüman verilmemişse,"
+
+#~ msgid "removes the top directory from the stack, and cd's to the new"
+#~ msgstr "yığıtın en üstündeki dizini yığıttan kaldırır ve"
+
+#~ msgid "+N   removes the Nth entry counting from the left of the list"
+#~ msgstr "+N   `dirs' tarafından gösterilen listenin solundan saymaya"
+
+#~ msgid "     shown by `dirs', starting with zero.  For example: `popd +0'"
+#~ msgstr "     sıfırla başlandığında N'inci girdiyi siler. Örneğin,"
+
+#~ msgid "     removes the first directory, `popd +1' the second."
+#~ msgstr "     `popd +0' ilk dizini `popd +1' ikincisini siler."
+
+#~ msgid "-N   removes the Nth entry counting from the right of the list"
+#~ msgstr "-N   `dirs' tarafından gösterilen listenin sağından saymaya"
+
+#~ msgid "     shown by `dirs', starting with zero.  For example: `popd -0'"
+#~ msgstr "     sıfırla başlandığında N'inci girdiyi siler. Örneğin,"
+
+#~ msgid "     removes the last directory, `popd -1' the next to last."
+#~ msgstr "     `popd -0' son dizini `popd -1' sonuncudan öncekini siler."
+
+#~ msgid ""
+#~ "-n   suppress the normal change of directory when removing directories"
+#~ msgstr ""
+#~ "-n   dizinleri yığıttan silerken normal dizin değişikliğini engeller,"
+
+#~ msgid "     from the stack, so only the stack is manipulated."
+#~ msgstr "     böylece sadece yığıt değiştirilmiş olur."
+
+#~ msgid "allocated"
+#~ msgstr "ayrılmış"
+
+#~ msgid "freed"
+#~ msgstr "serbest bırakılmış"
+
+#~ msgid "requesting resize"
+#~ msgstr "yeniden boyutlandırma isteniyor"
+
+#~ msgid "just resized"
+#~ msgstr "yeniden boyutlandırıldı"
+
+#~ msgid "bug: unknown operation"
+#~ msgstr "yazılım hatası: unknown operation"
+
+#~ msgid "malloc: watch alert: %p %s "
+#~ msgstr "malloc: yakalama alarmı: %p %s "
+
+#~ msgid "xrealloc: cannot reallocate %lu bytes (%lu bytes allocated)"
+#~ msgstr "xrealloc: %lu bayt yeniden ayrılamıyor (%lu bayt ayrıldı)"
+
+#~ msgid "xrealloc: cannot allocate %lu bytes"
+#~ msgstr "xrealloc: %lu bayt yeniden ayrılamıyor"
+
+#~ msgid "xrealloc: %s:%d: cannot reallocate %lu bytes (%lu bytes allocated)"
+#~ msgstr "xrealloc: %s:%d: %lu bayt yeniden ayrılamıyor (%lu bayt ayrıldı)"
+
+#~ msgid ""
+#~ "Exit from within a FOR, WHILE or UNTIL loop.  If N is specified,\n"
+#~ "    break N levels."
+#~ msgstr ""
+#~ "\rbreak [N]\n"
+#~ "    FOR, WHILE veya UNTIL döngülerinden çıkılmasını sağlar. N "
+#~ "verilmiÅŸse,\n"
+#~ "    dışa doğru N. döngüden çıkılır. N >= 1 olmalıdır."
+
+#~ msgid ""
+#~ "Run a shell builtin.  This is useful when you wish to rename a\n"
+#~ "    shell builtin to be a function, but need the functionality of the\n"
+#~ "    builtin within the function itself."
+#~ msgstr ""
+#~ "\rbuiltin [kabuk-yerleşiği [argümanlar]]\n"
+#~ "    Bir  kabuk  yerleşiğini  çalıştırır.  Bu bir kabuk işlevinin bir "
+#~ "kabul\n"
+#~ "    yerleşiği ile aynı isimde atanması durumunda faydalıdır, fakat "
+#~ "iÅŸlevin\n"
+#~ "    içinde yerleşiğin işlevselliğinin sağlanması gerekir."
+
+#~ msgid ""
+#~ "Print the current working directory.  With the -P option, pwd prints\n"
+#~ "    the physical directory, without any symbolic links; the -L option\n"
+#~ "    makes pwd follow symbolic links."
+#~ msgstr ""
+#~ "\rpwd [-LP]\n"
+#~ "    Geçerli çalışma dizinini basar. -P seçeneği ile sembolik bağlar\n"
+#~ "    olmaksızın fiziksel dizini basar;  -L seçeneği ile sembolik bağları "
+#~ "izler."
+
+#~ msgid "Return a successful result."
+#~ msgstr ""
+#~ "\rtrue\n"
+#~ "    Başarılı bir sonuç döndürür."
+
+#~ msgid ""
+#~ "Runs COMMAND with ARGS ignoring shell functions.  If you have a shell\n"
+#~ "    function called `ls', and you wish to call the command `ls', you can\n"
+#~ "    say \"command ls\".  If the -p option is given, a default value is "
+#~ "used\n"
+#~ "    for PATH that is guaranteed to find all of the standard utilities.  "
+#~ "If\n"
+#~ "    the -V or -v option is given, a string is printed describing "
+#~ "COMMAND.\n"
+#~ "    The -V option produces a more verbose description."
+#~ msgstr ""
+#~ "\rcommand [-pVv] KOMUT [ARGümanlar ...]\n"
+#~ "    KOMUT  komutunu  KOMUT  isimli kabuk iÅŸlevini yoksayarak  "
+#~ "ARGümanlarla\n"
+#~ "    çalıştırır. Örneğin,  `ls'  isimli bir kabuk işlevi varsa ve siz  "
+#~ "`ls'\n"
+#~ "    komutunu  çalıştırmak  istiyorsanız   \"command ls\"   "
+#~ "diyebilirsiniz.\n"
+#~ "    -p seçeneği verilmişse, tüm standart uygulamaların bulunmasını "
+#~ "garanti\n"
+#~ "    eden PATH için bir öntanımlı değer kullanılır.  -V  ya da  -v "
+#~ "seçeneği\n"
+#~ "    verilmişse,  KOMUTu  açıklayan  bir dizge  basılır.  -V  seçeneği "
+#~ "daha\n"
+#~ "    ayrıntılı açıklama üretilmesini sağlar. "
+
+#~ msgid ""
+#~ "Declare variables and/or give them attributes.  If no NAMEs are\n"
+#~ "    given, then display the values of variables instead.  The -p option\n"
+#~ "    will display the attributes and values of each NAME.\n"
+#~ "    \n"
+#~ "    The flags are:\n"
+#~ "    \n"
+#~ "      -a\tto make NAMEs arrays (if supported)\n"
+#~ "      -f\tto select from among function names only\n"
+#~ "      -F\tto display function names (and line number and source file name "
+#~ "if\n"
+#~ "    \tdebugging) without definitions\n"
+#~ "      -i\tto make NAMEs have the `integer' attribute\n"
+#~ "      -r\tto make NAMEs readonly\n"
+#~ "      -t\tto make NAMEs have the `trace' attribute\n"
+#~ "      -x\tto make NAMEs export\n"
+#~ "    \n"
+#~ "    Variables with the integer attribute have arithmetic evaluation (see\n"
+#~ "    `let') done when the variable is assigned to.\n"
+#~ "    \n"
+#~ "    When displaying values of variables, -f displays a function's name\n"
+#~ "    and definition.  The -F option restricts the display to function\n"
+#~ "    name only.\n"
+#~ "    \n"
+#~ "    Using `+' instead of `-' turns off the given attribute instead.  "
+#~ "When\n"
+#~ "    used in a function, makes NAMEs local, as with the `local' command."
+#~ msgstr ""
+#~ "\rdeclare [-afFirtx] [-p] [Ä°SÄ°M[=DEÄžER] ...]\n"
+#~ "    Değişkenlerin özellikleri ile  bildirilmesini  sağlar.  Hiçbir  İSİM\n"
+#~ "    verilmezse değişkenleri ve değerlerini listeler. -p seçeneği ile her\n"
+#~ "    İSİM için değerler ve özellikleri gösterecektir.\n"
+#~ "\n"
+#~ "    Seçenekler:\n"
+#~ "\n"
+#~ "      -a    Her Ä°SÄ°M bir dizi deÄŸiÅŸkenidir(destekleniyorsa)\n"
+#~ "      -f    Sadece işlev isimleri kullanılır.\n"
+#~ "      -F    Tanımları olmaksızın sadece işlev isimleri  (ve hata "
+#~ "ayıklaması\n"
+#~ "            yapılıyorsa kaynak dosya isimleri ve satır sayıları) "
+#~ "gösterilir\n"
+#~ "      -i    Her İSİMe  `integer' özniteliği verir.\n"
+#~ "      -r    Ä°SÄ°Mleri salt-okunur yapar.\n"
+#~ "      -t    Her İSİMe `trace' özniteliği verir.\n"
+#~ "      -x    İSİMleri ihraç edilebilir yapar\n"
+#~ "\n"
+#~ "    Tamsayı öznitelikli değişkenlere bir DEĞER atandığında aritmetik\n"
+#~ "    değerlendirme uygulanır (bkz, `let').\n"
+#~ "\n"
+#~ "    Değişken değerleri gösterilirken,  -f  bir işlevin ismini ve "
+#~ "tanımını\n"
+#~ "    gösterir. -F seçeneği ile sadece işlev isminin gösterilmesini "
+#~ "saÄŸlar.\n"
+#~ "\n"
+#~ "    `-' yerine `+' kullanarak belirtilen öznitelik kapatılabilir.\n"
+#~ "    Bir işlevde kullanıldığında declare her İSİMi `local' komutu "
+#~ "kullanılmış\n"
+#~ "    gibi yerel yapar."
+
+#~ msgid "Obsolete.  See `declare'."
+#~ msgstr ""
+#~ "\rtypeset [-afFirtx] [-p] Ä°SÄ°M[=DEÄžER] ...\n"
+#~ "    Geçersiz (eski). `declare'ye bakın."
+
+#~ msgid ""
+#~ "Create a local variable called NAME, and give it VALUE.  LOCAL\n"
+#~ "    can only be used within a function; it makes the variable NAME\n"
+#~ "    have a visible scope restricted to that function and its children."
+#~ msgstr ""
+#~ "\rlocal [seçenek] İSİM[=DEĞER] ...\n"
+#~ "    Ä°SÄ°M  isimli  bir  yerel  deÄŸiÅŸken  oluÅŸturulup,  ona  DEÄžER  atar.\n"
+#~ "    local sadece bir işlev  içinde  kullanılabilir;  İSİM  değişkeninin\n"
+#~ "    sadece işlev ve çocuklarının etki alanında görünür olmasını sağlar."
+
+#~ msgid ""
+#~ "Output the ARGs.  If -n is specified, the trailing newline is suppressed."
+#~ msgstr ""
+#~ "\recho [-neE] [ARG ...]\n"
+#~ "    ARGümanlarını çıktılar. -n belirtilmişse, satırsonu bastırılır."
+
+#~ msgid ""
+#~ "Enable and disable builtin shell commands.  This allows\n"
+#~ "    you to use a disk command which has the same name as a shell\n"
+#~ "    builtin without specifying a full pathname.  If -n is used, the\n"
+#~ "    NAMEs become disabled; otherwise NAMEs are enabled.  For example,\n"
+#~ "    to use the `test' found in $PATH instead of the shell builtin\n"
+#~ "    version, type `enable -n test'.  On systems supporting dynamic\n"
+#~ "    loading, the -f option may be used to load new builtins from the\n"
+#~ "    shared object FILENAME.  The -d option will delete a builtin\n"
+#~ "    previously loaded with -f.  If no non-option names are given, or\n"
+#~ "    the -p option is supplied, a list of builtins is printed.  The\n"
+#~ "    -a option means to print every builtin with an indication of whether\n"
+#~ "    or not it is enabled.  The -s option restricts the output to the "
+#~ "POSIX.2\n"
+#~ "    `special' builtins.  The -n option displays a list of all disabled "
+#~ "builtins."
+#~ msgstr ""
+#~ "\renable [-n] [-p] [-f DOSYAÄ°SMÄ°] [-ads] [Ä°SÄ°M ...]\n"
+#~ "    Yerleşik  kabuk  komutlarını  etkinleştirir  ve  kaldırır.  Bir  "
+#~ "kabuk\n"
+#~ "    yerleşiği  ile  aynı  isme  sahip  bir  disk  komutunun tam dosya "
+#~ "yolu\n"
+#~ "    belirtmeksizin   kullanılabilmesini   mümkün   kılar.    -n   "
+#~ "seçeneği\n"
+#~ "    kullanılmışsa İSİMler  kullanımdan kaldırılır;  aksi takdirde  "
+#~ "Ä°SÄ°Mler\n"
+#~ "    etkin kılınır.  Örneğin `test' yerleşiği yerine  `test'  "
+#~ "uygulamasının\n"
+#~ "    yerleşik  komut olarak  kullanılmasını sağlamak için  `enable -n "
+#~ "test'\n"
+#~ "    yazmalısınız.   Dinamik  yüklemenin   desteklendiği  sistemlerde,   -"
+#~ "f\n"
+#~ "    seçeneği ile yeni bir İSİM yerleşik komutunun DOSYAİSMİ ile "
+#~ "belirtilen\n"
+#~ "    paylaşımlı nesneden yüklenmesi sağlanır.  -d seçeneği  -f ile "
+#~ "yüklenen\n"
+#~ "    yerleşiği  silmek  için  kullanılır.  Hiç seçenek verilmezse ya da  -"
+#~ "p\n"
+#~ "    seçeneği verilirse kabuk yerleşiklerinin bir  listesi  gösterilir.  -"
+#~ "a\n"
+#~ "    seçeneği ile her yerleşik etkin olup olmadığı belirtilerek "
+#~ "listelenir.\n"
+#~ "    -s  seçeneği ile sadece POSIX'e özel yerleşikleri içerir.  -n "
+#~ "seçeneği\n"
+#~ "    bir   İSİM   belirtilmeksizin   kullanılırsa  kullanımdan  "
+#~ "kaldırılmış\n"
+#~ "    yerleÅŸikleri listeler."
+
+#~ msgid ""
+#~ "Read ARGs as input to the shell and execute the resulting command(s)."
+#~ msgstr ""
+#~ "\reval [ARG ...]\n"
+#~ "   Kabuğa girilmiş biçimleriyle ARG'ları okur ve sonuçlanan komutları "
+#~ "çalıştır."
+
+#~ msgid ""
+#~ "Exec FILE, replacing this shell with the specified program.\n"
+#~ "    If FILE is not specified, the redirections take effect in this\n"
+#~ "    shell.  If the first argument is `-l', then place a dash in the\n"
+#~ "    zeroth arg passed to FILE, as login does.  If the `-c' option\n"
+#~ "    is supplied, FILE is executed with a null environment.  The `-a'\n"
+#~ "    option means to make set argv[0] of the executed process to NAME.\n"
+#~ "    If the file cannot be executed and the shell is not interactive,\n"
+#~ "    then the shell exits, unless the shell option `execfail' is set."
+#~ msgstr ""
+#~ "\rexec [-cl] [-a AD] DOSYA [YÖNLENDİRMELER]]\n"
+#~ "    DOSYA'yı yeni bir süreç oluşturmadan kabukla değiştirip çalıştırır.\n"
+#~ "    Eğer  DOSYA  belirtilmemişse,  kabukta  YÖNLENDİRMELER etkili olur.\n"
+#~ "    Eğer ilk  argüman  -l ise,  login'in yaptığı gibi DOSYAya aktarılan\n"
+#~ "    sıfırıncı argümana bir tire yerleştirilir.  -c seçeneği verilmişse,\n"
+#~ "    DOSYA  boş bir ortamda çalıştırılır.  -a  seçeneği verilirse kabuk,\n"
+#~ "    DOSYAya  ADı  0.  argüman  (argv[0])  olarak  aktarır.  Eğer  DOSYA\n"
+#~ "    çalıştırılamazsa  ve  kabuk etkileşimli değilse,  `execfail'  kabuk\n"
+#~ "    değişkeni etkin olmadıkça kabuk çıkar."
+
+#~ msgid "Logout of a login shell."
+#~ msgstr ""
+#~ "\rlogout\n"
+#~ "    Oturum kabuğundan çıkıp oturumu kapatır."
+
+#~ msgid ""
+#~ "For each NAME, the full pathname of the command is determined and\n"
+#~ "    remembered.  If the -p option is supplied, PATHNAME is used as the\n"
+#~ "    full pathname of NAME, and no path search is performed.  The -r\n"
+#~ "    option causes the shell to forget all remembered locations.  The -d\n"
+#~ "    option causes the shell to forget the remembered location of each "
+#~ "NAME.\n"
+#~ "    If the -t option is supplied the full pathname to which each NAME\n"
+#~ "    corresponds is printed.  If multiple NAME arguments are supplied "
+#~ "with\n"
+#~ "    -t, the NAME is printed before the hashed full pathname.  The -l "
+#~ "option\n"
+#~ "    causes output to be displayed in a format that may be reused as "
+#~ "input.\n"
+#~ "    If no arguments are given, information about remembered commands is "
+#~ "displayed."
+#~ msgstr ""
+#~ "\rhash [-lr] [-p DOSYAYOLU] [-dt] [AD]\n"
+#~ "    AD argümanları olarak belirtilen  komutların  tam  dosya  yollarını\n"
+#~ "    hatırlar,  böylece  müteakip  çağrılarda aranmalarına gerek kalmaz.\n"
+#~ "    Komutlar $PATH içinde listelenmiş  dizinler  aranarak  bulunur.  -p\n"
+#~ "    seçeneği  dosya  yolu  aramalarını  engeller  ve ADın konumu olarak\n"
+#~ "    DOSYAYOLU kullanılır. -r seçeneği hatırlanan tüm konumları  kabuğun\n"
+#~ "    unutmasına  sebep olur.  -d seçeneği her AD için hatırlanan konumun\n"
+#~ "    kabuk tarafından unutulmasına sebep olur. -t seçeneği  verildiğinde\n"
+#~ "    her ADa karşılık gelen dosya konumları basılır. -t seçeneği ile çok\n"
+#~ "    sayıda AD verilirse, AD hatırlanan tam dosya yolundan önce basılır.\n"
+#~ "    -l  seçeneği çıktının girdi olarak tekrar kullanılmasını sağlayacak\n"
+#~ "    biçimde basılmasını sağlar. Hiç argüman belirtilmezse ya da  sadece\n"
+#~ "   -l seçeneği belirtilirse hatırlanan komutlar hakkında bilgi basılır."
+
+#~ msgid ""
+#~ "Display helpful information about builtin commands.  If PATTERN is\n"
+#~ "    specified, gives detailed help on all commands matching PATTERN,\n"
+#~ "    otherwise a list of the builtins is printed.  The -s option\n"
+#~ "    restricts the output for each builtin command matching PATTERN to\n"
+#~ "    a short usage synopsis."
+#~ msgstr ""
+#~ "\rhelp [-s] [KALIP]\n"
+#~ "    Yerleşik komutlar hakkında yardım bilgisi gösterir. KALIP  "
+#~ "belirtilmiÅŸse,\n"
+#~ "    help  KALIP  ile eşleşen tüm komutlar için yardım bilgisi  gösterir, "
+#~ "aksi\n"
+#~ "    takdirde yerleşikler listelenir.   -s seçeneği ile yardım bilgisi  "
+#~ "yerine\n"
+#~ "    komutun kullanımını gösteren sözdizimini basar."
+
+#~ msgid ""
+#~ "By default, removes each JOBSPEC argument from the table of active jobs.\n"
+#~ "    If the -h option is given, the job is not removed from the table, but "
+#~ "is\n"
+#~ "    marked so that SIGHUP is not sent to the job if the shell receives a\n"
+#~ "    SIGHUP.  The -a option, when JOBSPEC is not supplied, means to remove "
+#~ "all\n"
+#~ "    jobs from the job table; the -r option means to remove only running "
+#~ "jobs."
+#~ msgstr ""
+#~ "\rdisown [-h] [-ar] [Ä°Åž_BELÄ°RTÄ°MÄ° ...]\n"
+#~ "    Seçeneksiz kullanımda her İŞ_BELİRTİMİ etkin  işler  tablosundan\n"
+#~ "    kaldırılır.  -h seçeneği ile iş tablodan kaldırılmaz ama imlenir\n"
+#~ "    böylece kabuk bir SIGHUP alırsa bunu işe göndermez. İŞ_BELİRTİMİ\n"
+#~ "    verilmeden -a seçeneğinin kullanılması durumunda iş tablosundaki\n"
+#~ "    tüm işler kaldırılır.  İŞ_BELİRTİMİ  verilmeden  -r  seçeneğinin\n"
+#~ "    kullanılması durumunda ise sadece çalışmakta olan işler kaldırılır."
+
+#~ msgid ""
+#~ "One line is read from the standard input, or from file descriptor FD if "
+#~ "the\n"
+#~ "    -u option is supplied, and the first word is assigned to the first "
+#~ "NAME,\n"
+#~ "    the second word to the second NAME, and so on, with leftover words "
+#~ "assigned\n"
+#~ "    to the last NAME.  Only the characters found in $IFS are recognized "
+#~ "as word\n"
+#~ "    delimiters.  If no NAMEs are supplied, the line read is stored in the "
+#~ "REPLY\n"
+#~ "    variable.  If the -r option is given, this signifies `raw' input, "
+#~ "and\n"
+#~ "    backslash escaping is disabled.  The -d option causes read to "
+#~ "continue\n"
+#~ "    until the first character of DELIM is read, rather than newline.  If "
+#~ "the -p\n"
+#~ "    option is supplied, the string PROMPT is output without a trailing "
+#~ "newline\n"
+#~ "    before attempting to read.  If -a is supplied, the words read are "
+#~ "assigned\n"
+#~ "    to sequential indices of ARRAY, starting at zero.  If -e is supplied "
+#~ "and\n"
+#~ "    the shell is interactive, readline is used to obtain the line.  If -n "
+#~ "is\n"
+#~ "    supplied with a non-zero NCHARS argument, read returns after NCHARS\n"
+#~ "    characters have been read.  The -s option causes input coming from a\n"
+#~ "    terminal to not be echoed.\n"
+#~ "    \n"
+#~ "    The -t option causes read to time out and return failure if a "
+#~ "complete line\n"
+#~ "    of input is not read within TIMEOUT seconds.  If the TMOUT variable "
+#~ "is set,\n"
+#~ "    its value is the default timeout.  The return code is zero, unless "
+#~ "end-of-file\n"
+#~ "    is encountered, read times out, or an invalid file descriptor is "
+#~ "supplied as\n"
+#~ "    the argument to -u."
+#~ msgstr ""
+#~ "\rread [-ers] [-u DSYTNT] [-t ZMAÅžM] [-p Ä°STEM] [-a DÄ°ZÄ°]\n"
+#~ "     [-n KRKSAY] [-d AYRAÇ] [İSİM ...]\n"
+#~ "    Standart girdiden ya da -u seçeneği ile sağlanan  DoSYaTaNıTıcıdan  "
+#~ "tek\n"
+#~ "    satır okur ve ilk sözcük ilk İSİMe, ikinci sözcük ikinci İSİMe ve "
+#~ "böyle\n"
+#~ "    giderek,  aradaki sözcükler ve ayraçlar son İSİMe kadar atanır.  "
+#~ "Satırı\n"
+#~ "    sözcüklere ayırmakta sadece  $IFS  değişkeninin değerindeki "
+#~ "karakterler\n"
+#~ "    kullanılır.  Tersbölü satırın devam ettirilmesi için ve kendinden "
+#~ "sonra\n"
+#~ "    gelen özel karakterlerin  yorumlanması  için  kullanılabilir.  Hiç "
+#~ "isim\n"
+#~ "    verilmemişse,  satırın tamamı okunur ve  REPLY  değişkenine atanır.  -"
+#~ "r\n"
+#~ "    verildiğinde  tersbölü  bir  önceleme  karakteri  olarak  ele  "
+#~ "alınmaz,\n"
+#~ "    dolayısıyla tersbölü-satırsonu çifti satırın alt satırda devam "
+#~ "edeceÄŸini\n"
+#~ "    belirtmekte kullanılamaz.  -d  ile  satırın  satırsonu karakterine "
+#~ "kadar\n"
+#~ "    değil   AYRAÇ   karakterine  kadar  okunması  sağlanır.   -p  ile  "
+#~ "girdi\n"
+#~ "    beklendiğini belirtecek İSTEM  dizgesi  satırsonu  karakteri  "
+#~ "olmaksızın\n"
+#~ "    görüntülenir.   İstem  sadece girdi bir uçbirimden gelecekse "
+#~ "gösterilir.\n"
+#~ "    -a ile sözcükler sırayla DİZİ dizisinin elemanlarına atanır; dizinin "
+#~ "ilk\n"
+#~ "    elemanının indisi  0'dır;  atama  yapılmadan  önce  DİZİ  dizisinin  "
+#~ "tüm\n"
+#~ "    elemanları  silinir;  diğer  İSİM  argümanları yoksayılır.  -e ile "
+#~ "kabuk\n"
+#~ "    etkileşimliyse,  satırı  sağlamak  için  readline  kullanılır.   -n  "
+#~ "ile\n"
+#~ "    satırın  okunması  KRKSAYıncı  karakterde  sona erer; satırın kalanı "
+#~ "yok\n"
+#~ "    sayılır. -s ile sessiz kipe  girilir,  girdi  bir  uçbirimden  "
+#~ "geliyorsa\n"
+#~ "    karakterler  yansılanmaz.   -t  ile   satır   ZMAŞM  saniye  sonra  "
+#~ "hala\n"
+#~ "    sonlandırılmamışsa  read  zamanaşımına  düşer  ve  hata  döner.   "
+#~ "$TMOUT\n"
+#~ "    değişkeni  bir  değerle  atanmışsa  değeri  öntanımlı  zamanaşımı "
+#~ "deÄŸeri\n"
+#~ "    olarak ele alınır.  Bu seçenek, girdi bir uçbirim  ya  da  "
+#~ "boruhattından\n"
+#~ "    okunmuyorsa  etkisizdir.   Dosyasonu  karakteri  (Ctrl-D) "
+#~ "saptanmadıkça,\n"
+#~ "    okuma zamanaşımına düşmedikçe ya da -u seçeneği ile sağlanan\n"
+#~ "    DoSYaTaNıTıcı geçersiz olmadıkça dönüş durumu sıfırdır."
+
+#~ msgid ""
+#~ "Causes a function to exit with the return value specified by N.  If N\n"
+#~ "    is omitted, the return status is that of the last command."
+#~ msgstr ""
+#~ "\rreturn [N]\n"
+#~ "    Bir işlevin N değeri ile dönerek çıkmasına sebep olur. N verilmezse\n"
+#~ "    son komutun dönüş durumu döner."
+
+#~ msgid ""
+#~ "For each NAME, remove the corresponding variable or function.  Given\n"
+#~ "    the `-v', unset will only act on variables.  Given the `-f' flag,\n"
+#~ "    unset will only act on functions.  With neither flag, unset first\n"
+#~ "    tries to unset a variable, and if that fails, then tries to unset a\n"
+#~ "    function.  Some variables cannot be unset; also see readonly."
+#~ msgstr ""
+#~ "\runset [-f] [-v] [AD ...]\n"
+#~ "    ADı belirtilen her işlev ya da değişken kaldırılır. -v verilmişse,\n"
+#~ "    işlem sadece kabuk değişkenlerine uygulanır.  -f verilmişse, işlem\n"
+#~ "    sadece  kabuk  işlevlerine  uygulanır  ve işlev tanımı kaldırılır.\n"
+#~ "    Hiçbir seçenek verilmemişse, unset önce bir  değişkeni  kaldırmayı\n"
+#~ "    dener,  başarısız olursa bir işlevi kaldırmayı dener.  Salt-okunur\n"
+#~ "    değişkenler ve işlevler kaldırılamaz."
+
+#~ msgid ""
+#~ "NAMEs are marked for automatic export to the environment of\n"
+#~ "    subsequently executed commands.  If the -f option is given,\n"
+#~ "    the NAMEs refer to functions.  If no NAMEs are given, or if `-p'\n"
+#~ "    is given, a list of all names that are exported in this shell is\n"
+#~ "    printed.  An argument of `-n' says to remove the export property\n"
+#~ "    from subsequent NAMEs.  An argument of `--' disables further option\n"
+#~ "    processing."
+#~ msgstr ""
+#~ "\rexport [-nf] [Ä°SÄ°M[=DEÄžER] ...]\n"
+#~ "export -p\n"
+#~ "    Ortamdaki  çocuk  sürece aktarılacak her İSİM'i imler.  -f "
+#~ "verilmiÅŸse\n"
+#~ "    Ä°SÄ°M'ler kabuk iÅŸlevleridir,  aksi  takdirde  kabuk  "
+#~ "deÄŸiÅŸkenleridir.\n"
+#~ "    -n  seçeneği  verilirse  aktarılacak  İSİM'ler  artık imlenmez.  "
+#~ "Ä°SÄ°M\n"
+#~ "    verilmemişse veya -p seçeneği verilmişse aktarılan İSİM'lerin "
+#~ "listesi\n"
+#~ "    gösterilir.  -p  seçeneği çıktının girdi olarak tekrar "
+#~ "kullanılabilir\n"
+#~ "    biçimde gösterilmesini sağlar.  Bir değişken  isminden  sonra  "
+#~ "=DEÄžER\n"
+#~ "    geliyorsa değer değişkenin değeri yapılır. `--' ile seçenek "
+#~ "iÅŸlemleri\n"
+#~ "    kapatılır."
+
+#~ msgid ""
+#~ "The given NAMEs are marked readonly and the values of these NAMEs may\n"
+#~ "    not be changed by subsequent assignment.  If the -f option is given,\n"
+#~ "    then functions corresponding to the NAMEs are so marked.  If no\n"
+#~ "    arguments are given, or if `-p' is given, a list of all readonly "
+#~ "names\n"
+#~ "    is printed.  The `-a' option means to treat each NAME as\n"
+#~ "    an array variable.  An argument of `--' disables further option\n"
+#~ "    processing."
+#~ msgstr ""
+#~ "\rreadonly [-af] [Ä°SÄ°M[=DEÄžER] ...]\n"
+#~ "readonly -p\n"
+#~ "    Her Ä°SÄ°M'i salt-okunur olarak imler. Bu Ä°SÄ°M'lerin deÄŸerleri\n"
+#~ "    müteakip çağrılarda değiştirilemez. -f seçeneği verilirse, her\n"
+#~ "    İSİM bir kabuk işlevi olarak imlenir. -a seçeneği verilirse, her\n"
+#~ "    isim bir dizi değişkeni olarak ele alınır. Hiç argüman verilmezse\n"
+#~ "    veya -p seçeneği verilirse salt-okunur isimlerin hepsi basılır. Bir\n"
+#~ "    deÄŸiÅŸken isminden sonra bir =DEÄžER geliyorsa DEÄžER deÄŸiÅŸkenin deÄŸeri\n"
+#~ "    yapılır. `--' ile seçenek işlemleri kapatılır."
+
+#~ msgid ""
+#~ "The positional parameters from $N+1 ... are renamed to $1 ...  If N is\n"
+#~ "    not given, it is assumed to be 1."
+#~ msgstr ""
+#~ "\rshift [N]\n"
+#~ "    $N+1 ... konumsal parametreleri $1 ... olarak ele alınır.\n"
+#~ "    N verilmezse 1 kabul edilir."
+
+#~ msgid ""
+#~ "Suspend the execution of this shell until it receives a SIGCONT\n"
+#~ "    signal.  The `-f' if specified says not to complain about this\n"
+#~ "    being a login shell if it is; just suspend anyway."
+#~ msgstr ""
+#~ "\rsuspend [-f]\n"
+#~ "    Bu kabuğun çalışmasını bir SIGCONT sinyali alana kadar askıya alır.\n"
+#~ "    -f seçeneği kullanıldığında kabuk bir giriş kabuğu olsa bile askıya "
+#~ "alınır."
+
+#~ msgid ""
+#~ "Print the accumulated user and system times for processes run from\n"
+#~ "    the shell."
+#~ msgstr ""
+#~ "\rtimes\n"
+#~ "    Kabukta çalışan süreçlerden toplanan kullanıcı ve sistem zamanlarını "
+#~ "basar."
+
+#~ msgid ""
+#~ "For each NAME, indicate how it would be interpreted if used as a\n"
+#~ "    command name.\n"
+#~ "    \n"
+#~ "    If the -t option is used, `type' outputs a single word which is one "
+#~ "of\n"
+#~ "    `alias', `keyword', `function', `builtin', `file' or `', if NAME is "
+#~ "an\n"
+#~ "    alias, shell reserved word, shell function, shell builtin, disk "
+#~ "file,\n"
+#~ "    or unfound, respectively.\n"
+#~ "    \n"
+#~ "    If the -p flag is used, `type' either returns the name of the disk\n"
+#~ "    file that would be executed, or nothing if `type -t NAME' would not\n"
+#~ "    return `file'.\n"
+#~ "    \n"
+#~ "    If the -a flag is used, `type' displays all of the places that "
+#~ "contain\n"
+#~ "    an executable named `file'.  This includes aliases, builtins, and\n"
+#~ "    functions, if and only if the -p flag is not also used.\n"
+#~ "    \n"
+#~ "    The -f flag suppresses shell function lookup.\n"
+#~ "    \n"
+#~ "    The -P flag forces a PATH search for each NAME, even if it is an "
+#~ "alias,\n"
+#~ "    builtin, or function, and returns the name of the disk file that "
+#~ "would\n"
+#~ "    be executed."
+#~ msgstr ""
+#~ "\rtype [-afptP] AD [AD ...]\n"
+#~ "    Her ADın bir komut ismi olarak kullanılırsa nasıl yorumlanması\n"
+#~ "    gerektiÄŸini belirtir.\n"
+#~ "\n"
+#~ "    -t seçeneği verildiğinde, AD bir takma ad ise `alias', bir işlev ise\n"
+#~ "   `function',  bir yerleşik komut ise `builtin',  bir disk dosyası ise \n"
+#~ "   `file' veya bir anahtar sözcük ise `keyword' sözcüğünü basar.\n"
+#~ "\n"
+#~ "    -p seçeneği verildiğinde, AD, `type -t AD' çıktısı file sonucunu\n"
+#~ "    vermiyorsa hiçbir şey dönmez,  aksi takdirde çalıştırılacak disk\n"
+#~ "    dosyasının ismi basılır.\n"
+#~ "\n"
+#~ "    -a seçeneği  verildiğinde,  isim  çalıştırılabilir  dosyasının\n"
+#~ "    bulunabileceği yerleri basar. Bu, sadece ve sadece -p seçeneği\n"
+#~ "    kullanılmamışsa takma adları,  yerleşik komutları ve işlevleri\n"
+#~ "    de içerir.\n"
+#~ "\n"
+#~ "    -f seçeneği belirtilmişse type kabuk işlevlerini bulmaya çalışmaz.\n"
+#~ "\n"
+#~ "    -P seçeneği her ADiçin, bir takma ad, yerleşik komut veya işlev "
+#~ "olmasa\n"
+#~ "    bile bir yol araması yapılmasını için zorlar  ve çalıştırılabilir "
+#~ "disk\n"
+#~ "    dosyası ismi ile döner."
+
+#~ msgid ""
+#~ "The user file-creation mask is set to MODE.  If MODE is omitted, or if\n"
+#~ "    `-S' is supplied, the current value of the mask is printed.  The `-"
+#~ "S'\n"
+#~ "    option makes the output symbolic; otherwise an octal number is "
+#~ "output.\n"
+#~ "    If `-p' is supplied, and MODE is omitted, the output is in a form\n"
+#~ "    that may be used as input.  If MODE begins with a digit, it is\n"
+#~ "    interpreted as an octal number, otherwise it is a symbolic mode "
+#~ "string\n"
+#~ "    like that accepted by chmod(1)."
+#~ msgstr ""
+#~ "\rumask [-p] [-S] [KÄ°P]\n"
+#~ "    Kabuk sürecinin dosya oluşturma  maskesini  KİP  olarak  ayarlar.\n"
+#~ "    -S  seçeneği  bir  KİP olmaksızın verilirse, maske sembolik kipte\n"
+#~ "    gösterilir. -S seçeneği çıktının sembolik olmasını sağlar,  yoksa\n"
+#~ "    sekizlik değer basılır. -p seçeneği bir KİP olmaksızın verilirse,\n"
+#~ "    maske,  kabuğa girdi olarak verilebilecek biçemde gösterilir. KİP\n"
+#~ "    bir rakam ile başlıyorsa sekizlik  bir  sayı  olarak  yorumlanır;\n"
+#~ "    rakamla başlamıyorsa,  chmod(1) komutundaki gibi bir sembolik kip\n"
+#~ "    maskesi olarak yorumlanır.  Eğer KİP verilmezse,  maskenin mevcut\n"
+#~ "    değeri gösterilir."
+
+#~ msgid ""
+#~ "Wait for the specified process and report its termination status.  If\n"
+#~ "    N is not given, all currently active child processes are waited for,\n"
+#~ "    and the return code is zero.  N is a process ID; if it is not given,\n"
+#~ "    all child processes of the shell are waited for."
+#~ msgstr ""
+#~ "\rwait [N]\n"
+#~ "    Belirtilen süreci bekler ve sonlandırma  durumunu  raporlar.  N\n"
+#~ "    verilmezse, o an etkin olan tüm süreçler için beklenir ve sıfır\n"
+#~ "    durumu ile dönülür.  N bir süreç kimliğidir; verilmezse kabuğun\n"
+#~ "    tüm alt süreçleri için beklenir."
+
+#~ msgid ""
+#~ "Create a simple command invoked by NAME which runs COMMANDS.\n"
+#~ "    Arguments on the command line along with NAME are passed to the\n"
+#~ "    function as $0 .. $n."
+#~ msgstr ""
+#~ "\rfunction AD { KOMUTlar ; }\n"
+#~ "\tveya\n"
+#~ "AD () { KOMUTlar ; }\n"
+#~ "    ADıyla çağrılarak KOMUTları çalıştıran basit bir komut oluşturur.\n"
+#~ "    AD ile birlikte verilen komut satırı argümanları işleve $0 .. $N\n"
+#~ "    olarak aktarılır."
+
+#~ msgid ""
+#~ "Toggle the values of variables controlling optional behavior.\n"
+#~ "    The -s flag means to enable (set) each OPTNAME; the -u flag\n"
+#~ "    unsets each OPTNAME.  The -q flag suppresses output; the exit\n"
+#~ "    status indicates whether each OPTNAME is set or unset.  The -o\n"
+#~ "    option restricts the OPTNAMEs to those defined for use with\n"
+#~ "    `set -o'.  With no options, or with the -p option, a list of all\n"
+#~ "    settable options is displayed, with an indication of whether or\n"
+#~ "    not each is set."
+#~ msgstr ""
+#~ "\rshopt [-pqsu] [-o UZUN-SEÇENEK] SÇNKADI [SÇNKADI...]\n"
+#~ "    İsteğe bağlı kabuk davranışlarını kontrol eden değişken değerlerini "
+#~ "açıp\n"
+#~ "    kapar.  -s ile belirtilen her SÇNKADInı etkinleştirir. -u ile "
+#~ "belirtilen\n"
+#~ "    her SÇNKADInı iptal eder.  -q ile normal çıktıyı engeller;  dönüş "
+#~ "durumu\n"
+#~ "    SÇNKADInın  etkin  olup olmadığını gösterir.  -o ile set yerleşiğinin "
+#~ "-o\n"
+#~ "    seçeneğinde kullanılabilecek SÇNKADI değerlerini sınırlar. Seçeneksiz "
+#~ "ya\n"
+#~ "    da -p seçeneği ile tüm atanabilir seçenekleri etkin  olup  "
+#~ "olmadıklarını\n"
+#~ "    belirterek listeler."
+
+#~ msgid ""
+#~ "For each NAME, specify how arguments are to be completed.\n"
+#~ "    If the -p option is supplied, or if no options are supplied, "
+#~ "existing\n"
+#~ "    completion specifications are printed in a way that allows them to "
+#~ "be\n"
+#~ "    reused as input.  The -r option removes a completion specification "
+#~ "for\n"
+#~ "    each NAME, or, if no NAMEs are supplied, all completion "
+#~ "specifications."
+#~ msgstr ""
+#~ "\rcomplete [-abcdefgjksuv] [-pr] [-o SEÇENEK] [-A EYLEM] [-G KALIP]\n"
+#~ "         [-W SÖZLİST] [-P ÖNEK] [-S SONEK] [-X SÜZGEÇ] [-F İŞLEV]\n"
+#~ "         [-C KOMUT] [AD ...]\n"
+#~ "    Her AD için argümanların nasıl tamamlanmaları gerektiği belirtilir.\n"
+#~ "    -p seçeneği verilirse veya hiç seçenek verilmezse, mevcut tamamlama\n"
+#~ "    belirtimleri girdi olarak  yeniden kullanılabilir  şekilde basılır.\n"
+#~ "    -r seçeneği her AD için tamamlama belirtimini kaldırır,\n"
+#~ "    hiç AD belirtilmezse tümü kaldırılır."
diff --git a/po/uk.gmo b/po/uk.gmo
new file mode 100644
index 0000000..0e79dd2
--- /dev/null
+++ b/po/uk.gmo
diff --git a/po/uk.po b/po/uk.po
new file mode 100644
index 0000000..de3c945
--- /dev/null
+++ b/po/uk.po
@@ -0,0 +1,6018 @@
+# Bash Ukrainian messages
+# Copyright (C) 2009 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+#
+# Myhailo Danylenko <isbear@ukrpost.net>, 2009.
+# Maxim V. Dziumanenko <dziumanenko@gmail.com>, 2010.
+# Yuri Chornoivan <yurchor@ukr.net>, 2011, 2013, 2014, 2015, 2016, 2018, 2019.
+msgid ""
+msgstr ""
+"Project-Id-Version: bash 5.0\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2019-01-08 20:48+0200\n"
+"Last-Translator: Yuri Chornoivan <yurchor@ukr.net>\n"
+"Language-Team: Ukrainian <translation-team-uk@lists.sourceforge.net>\n"
+"Language: uk\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
+"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
+"X-Generator: Lokalize 2.0\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "неправильний індек� ма�иву"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr "%s: вилучаємо атрибут nameref"
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: неможливо перетворити індек�ований ма�ив на а�оціативний"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: неправильний ключ а�оціативного ма�иву"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: означенн� нечи�лових елементів неможливе"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr "%s: %s: при означенні а�оціативних ма�ивів �лід вказувати ключ"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: не вдало�� �творити: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr ""
+"bash_execute_unix_command: не вдало�� знайти відповідне призначенн� дл� "
+"команди"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: перший непробільний �имвол не є «\"»"
+
+# c-format
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "нема заключної «%c» у %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: пропущено двокрапку-роздільник"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "«%s»: не вдало�� зн�ти призначенн�"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr "розкритт� дужок: не вдало�� отримати пам’�ть дл� %s"
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr "розкритт� дужок: не вдало�� отримати об’єм пам’�ті дл� %u елементів"
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr "розкритт� дужок: не вдало�� отримати об’єм пам’�ті дл� «%s»"
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "«%s»: некоректна назва замінника"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "редагуванн� р�дку не ввімкнено"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "«%s»: неправильна назва набору призначень клавіш"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: не вдало�� прочитати: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "«%s»: невідома назва функції"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s не призначено жодної клавіші.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s можна запу�тити за допомогою "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "«%s»: не вдало�� зн�ти призначенн�"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "кількі�ть циклів"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "має �ен� лише у�ередині циклів `for', `while' та `until'"
+
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Повертає контек�т виконанн� поточної підпрограми.\n"
+"    \n"
+"    Якщо ВИР�З не вказано, виводить \"$line $filename\". Інакше виводить\n"
+"    \"$line $subroutine $filename\"; цю додаткову інформацію можна\n"
+"    викори�товувати дл� тра�уванн� �теку.\n"
+"    \n"
+"    Значенн� ВИР�ЗУ визначає на �кільки рівнів викликів підн�ти�� від\n"
+"    поточного; поточний рівень є нульовим.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� невдало, �кщо оболонка зараз не виконує функцію\n"
+"    або �кщо ВИР�З є неправильним."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "змінну HOME не в�тановлено"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "забагато аргументів"
+
+#: builtins/cd.def:342
+msgid "null directory"
+msgstr "порожній каталог"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "змінну OLDPWD не в�тановлено"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "р�док %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "попередженн�: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: викори�товуйте: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: параметр потребує аргументу"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: потрібен чи�ловий аргумент"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: не знайдено"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: неправильний параметр"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: некоректна назва параметра"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "«%s»: неправильний ідентифікатор"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "неправильне ві�імкове чи�ло"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "неправильне ші�тнадц�ткове чи�ло"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "неправильне чи�ло"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: �игнал вказано з помилками"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "«%s»: не є ідентифікатором проце�у чи завданн�"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: змінна призначена лише дл� читанн�"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s виходить за в�тановлені межі"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "аргумент"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s виходить за в�тановлені межі"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: нема такого завданн�"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: керуванн� завданн�ми не ввімкнене"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "керуванн� завданн�ми не ввімкнене"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: заборонено обмеженн�ми"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "заборонено обмеженн�ми"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: не є вбудованою командою оболонки"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "помилка запи�у: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "помилка в�тановленн� параметрів термінала: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "помилка отриманн� параметрів термінала: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: помилка отриманн� поточного каталогу: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: завданн� вказано неоднозначно"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr "у цій вер�ії не можна �кори�тати�� довідкою"
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: не вдало�� знищити: %s лише дл� читанн�"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: не вдало�� знищити"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: неправильна назва дії"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: не вказано �пецифікаці� завершенн�"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "попередженн�: можливо параметр -F працює не так, �к ви очікуєте"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "попередженн�: можливо параметр -C працює не так, �к ви очікуєте"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "наразі функці� завершенн� р�дку не виконуєть��"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "може викори�товувати�� лише у�ередині функції"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr "%s: еталонна змінна не може бути ма�ивом"
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr "%s: не можна викори�товувати циклічне по�иланн� у змінній по�иланн�"
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s: циклічне по�иланн� за назвою"
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "«%s»: некоректна назва змінної дл� по�иланн� за назвою"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "`-f' не викори�товуєть�� дл� �творенн� функцій"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: незмінна функці�"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr ""
+"%s: в�тановленн� значень дл� �кладеного ма�иву у лапках вважаєть�� за�тарілим"
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: неможливо знищити ма�ив таким чином"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: неможливо перетворити а�оціативний ма�ив на індек�ований"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "динамічне завантаженн� недо�тупне"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "не вдало�� відкрити колективний об’єкт %s: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "не вдало�� знайти %s у колективному об’єкті %s: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: завантажений не динамічно"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr ""
+"функцією завантаженн� дл� %s повернуто повідомленн� щодо помилки (%d): не "
+"завантажено"
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: завантажений не динамічно"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: не вдало�� вилучити: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: це каталог"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: не є звичайним файлом"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: файл завеликий"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: не вдало�� виконати бінарний файл"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: не вдало�� виконати: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "вихід\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "це не оболонка �еан�у: викори�товуйте `exit'"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Залишили�� призупинені завданн�.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Фонові завданн� в�е ще виконують��.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "команду не знайдено"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "параметри журналу"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: не вдало�� відкрити тимча�овий файл: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "поточне"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "завданн� %d запущене без контролю завдань"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: неправильний параметр — %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: параметр потребує аргументу — %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "кешуванн� вимкнене"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: в кеші нічого немає\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "влучень\tкоманда\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Команди оболонки, що відповідають �лову `"
+msgstr[1] "Команди оболонки, що відповідають �ловам `"
+msgstr[2] "Команди оболонки, що відповідають �ловам `"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"«%s» не відповідає жодний розділ довідки. Спробуйте `help help' чи `man -k "
+"%s' або `info %s'."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: не вдало�� відкрити: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Ці команди оболонки визначені внутрішньо. Введіть `help', щоб побачити їх "
+"�пи�ок.\n"
+"Введіть `help name', щоб дізнати�� більше про функцію `name'.\n"
+"Викори�товуйте `info bash', щоб отримати більше інформації про оболонку в "
+"цілому.\n"
+"`man -k' чи `info' можуть �тати в пригоді дл� отриманн� довідки з команд, "
+"�ких немає\n"
+"у цьому �пи�ку.\n"
+"\n"
+"Зірочка (*) пор�д з назвою команди означає, що команда заборонена.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "-anrw можуть зу�трічати�� лише один раз"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "позиці� у журналу команд"
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: некоректна ча�ова позначка"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: невдалий пошук по журналу команд"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: помилка inlib"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "не можна викори�товувати інші параметри разом з `-x'"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: аргументи мають бути ідентифікаторами завдань чи проце�ів"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "�евідома помилка"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "очікував�� вираз"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: не є індек�ованим ма�ивом"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: неправильно вказаний де�криптор файла"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: неправильний де�криптор файла: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: неправильна кількі�ть р�дків"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: неправильний початковий індек�"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: неправильний крок виклику функції"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "порожн� назва змінної-ма�иву"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "змінні-ма�иви не підтримують��"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "«%s»: пропущено �имвол у шаблоні"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "«%c»: помилкове визначенн� формату ча�у"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "«%c»: помилковий �имвол у шаблоні"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "попередженн�: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "проблема з обробкою форматуванн�: %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "пропущено ші�тнадц�ткову цифру у \\x"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "пропущено цифру Unicode у \\%c"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "немає іншого каталогу"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s: некоректний аргумент"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<немає поточного каталогу>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "�тек каталогів порожній"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "рівень �теку каталогів"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Показує �пи�ок збережених каталогів. Каталоги\n"
+"    додають�� до цього �пи�ку командою `pushd'; ви можете повернути��\n"
+"    назад по �пи�ку за допомогою команди `popd'.\n"
+"    \n"
+"    Параметри:\n"
+"      -c\tочи�тити �пи�ок каталогів, вилучивши у�і його елементи\n"
+"      -l\tне викори�товувати ~ дл� каталогів, що перебувають у�ередині\n"
+"    \tвашого домашнього каталогу\n"
+"      -p\tвиводити каталоги по одному на р�док\n"
+"      -v\tвиводити каталоги по одному на р�док з зазначенн�м позиції у\n"
+"    \t�пи�ку\n"
+"    \n"
+"    �ргументи:\n"
+"      +N\tПоказує N-ний зліва каталог у �пи�ку, що виводить�� командою\n"
+"    \tdirs без аргументів, відлік починаєть�� з нул�.\n"
+"    \n"
+"      -N\tПоказує N-ний з кінц� каталог у �пи�ку, що виводить�� командою\n"
+"\tdirs без аргументів, відлік починаєть�� з нул�."
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Додає каталог на вершину �теку каталогів, чи циклічно обертає\n"
+"    �тек, в�тановлюючи поточний робочий каталог відповідно до його нової\n"
+"    вершини. Без аргументів мін�є мі�ц�ми дві найвищих каталоги.\n"
+"    \n"
+"    Параметри:\n"
+"      -n\t�е робити звичайного переходу у новий каталог при додаванні\n"
+"    \tкаталогів до �теку, виконувати операції лише над �теком.\n"
+"    \n"
+"    �ргументи:\n"
+"      +N\tЦиклічно обертає �тек так, щоб N-ний каталог, рахуючи\n"
+"    \tзліва (починаючи з нул�) у �пи�ку, що виводить�� командою `dirs'\n"
+"    \tопинить�� на вершині �теку.\n"
+"    \n"
+"      -N\tЦиклічно обертає �тек так, щоб N-ний каталог, рахуючи\n"
+"    \tз кінц� (починаючи з нул�) у �пи�ку, що виводить�� командою `dirs'\n"
+"    \tопинить�� на вершині �теку.\n"
+"    \n"
+"      dir\tДодає DIR на вершину �теку, й робить його поточним робочим\n"
+"    \tкаталогом.\n"
+"    \n"
+"    Вбудована команда `dirs' показує �тек каталогів."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Вилучає каталоги зі �теку збережених каталогів. Без аргументів, вилучає\n"
+"    верхній каталог у �теку і змінює поточний каталог відповідно до нової\n"
+"    вершини �теку.\n"
+"    \n"
+"    Параметри:\n"
+"      -n\t�е робити звичайного переходу до нової каталоги при вилученні\n"
+"    \tкаталогів зі �теку, проводити операції лише над �теком.\n"
+"    \n"
+"    �ргументи:\n"
+"      +N\tВилучає N-ний зліва каталог у �пи�ку, що показуєть�� командою "
+"`dirs'\n"
+"    \t(відлік починаєть�� з нул�). �априклад: `popd +0' вилучає перший "
+"каталог,\n"
+"    \t`popd +1' — другий.\n"
+"    \n"
+"      -N\tВилучає N-ний з кінц� каталог у �пи�ку, що показуєть�� командою\n"
+"    \t`dirs' (відлік починаєть�� з нул�). �априклад: `popd -0' вилучає\n"
+"    \tо�танній каталог, `popd -1' — передо�танній.\n"
+"    \n"
+"    Вбудована команда `dirs' показує �тек каталогів."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: некоректне визначенн� ча�у очікуванн�"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "помилка читанн�: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr ""
+"`return' працює лише у функції чи �крипті, запущеному за допомогою `source'"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "не можна одноча�но знищити і функцію і змінну"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: не є ма�ивом"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: не є функцією"
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr "%s: не вдало�� ек�портувати"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "кількі�ть з�увів"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "не можна одноча�но в�тановлювати й �ка�овувати параметри оболонки"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: неправильна назва параметра оболонки"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "потрібна назва файла"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: файл не знайдено"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "не вдало�� призупинити"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "не можна призупинити оболонку �еан�у"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s є п�евдонімом до «%s»\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s — це ключове �лово оболонки\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s є функцією\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s є �пеціальною вбудованою командою оболонки\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s є вбудованою командою оболонки\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s — це %s\n"
+
+# I know the difference between hash and cache, but here,
+# I think, this is more suitable...
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s знаходить�� в кеші (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: помилковий аргумент обмеженн�"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "«%c»: неправильна команда"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: не вдало�� отримати значенн� обмеженн�: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "значенн� обмеженн�"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: не вдало�� змінити обмеженн�: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "ві�імкове чи�ло"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "«%c»: помилковий оператор у �имвольному режимі"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "«%c»: помилковий �имвол у �имвольному режимі"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " р�док "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "о�танн� команда: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Припиненн�..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr "І�ФОРМ�ЦІЯ: "
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "невідома помилка команди"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "неправильний тип команди"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "неправильний з’єднувальний оператор"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "неправильний перехід"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: неозначена змінна"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\aча� очікуванн� вводу вичерпано: автоматичний вихід\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "не вдало�� пере�пр�мувати /dev/null на �тандартний ввід: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "TIMEFORMAT: «%c»: помилковий �имвол шаблону"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr "execute_coproc: coproc [%d:%s] в�е ще і�нує"
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "помилка каналу"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr "eval: перевищено мак�имальний рівень вкладено�ті eval (%d)"
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr "%s: перевищено мак�имальний рівень вкладено�ті джерела (%d)"
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr "%s: перевищено мак�имальний рівень вкладено�ті функцій (%d)"
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: обмеженн�: не можна вказувати `/' у назві команди"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: команду не знайдено"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: неправильний інтерпретатор"
+
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: не вдало�� виконати бінарний файл: %s"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "%s є �пеціальною вбудованою командою оболонки"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "не вдало�� �творити копію файлового де�криптору %d у %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "рівень вкладенн� виразів перевищено"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "не�тача �теку рекур�ії"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "�интак�ична помилка у виразі"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "�проба призначенн� не-змінної"
+
+#: expr.c:530
+msgid "syntax error in variable assignment"
+msgstr "�интак�ична помилка при �пробі надати змінній значенн�"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "діленн� на 0"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "вада: неправильна лек�ема у виразі"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "очікувала�� `:' умовного виразу"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "ек�понента менша за 0"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "пре-інкремент чи пре-декремент потребують ідентифікатор"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "від�утн� `)'"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "�интак�ична помилка: очікував�� операнд"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "�интак�ична помилка: помилковий арифметичний оператор"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (позначка помилки \"%s\")"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "некоректна арифметична о�нова"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: неправильна кількі�ть р�дків"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "завелике значенн� о�нови"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: помилка у виразі\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: не вдало�� отримати до�туп до каталогів вищого рівн�"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "не вдало�� перев�тановити режим без затримки файлового де�криптору %d"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr ""
+"не вдало�� отримати новий файловий де�криптор дл� вводу bash з файлового "
+"де�криптору %d"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input: дл� нового файлового де�криптору %d вже і�нує буфер"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: pgrp pipe"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr ""
+"ідентифікатор відгалуженого проце�у %d знайдено у поточному завданні %d"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "вилученн� зупиненого завданн� %d, що має групу проце�ів %ld"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr ""
+"add_process: ідентифікатор проце�у %5ld (%s) вказує на його працездатні�ть"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: ідентифікатор проце�у не і�нує"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Сигнал %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Завершено"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Зупинено"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Зупинено(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "Працює"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Зроблено(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Вихід %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "�евідомий �тан"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(збережено знімок оперативної пам’�ті)"
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (РД: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "зміна групи дочірнього проце�у (%ld на %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: проце� %ld не є відгалуженим від цієї оболонки"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: �ема запи�у дл� проце�у %ld"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: завданн� %d зупинене"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: нема такого завданн�"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: завданн� завершило��"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: завданн� %d вже працює в фоні"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr "waitchld: увімкнути WNOHANG, щоб уникнути не�кінченного блокуванн�"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: р�док %d: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (збережено знімок оперативної пам’�ті)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(тепер РД: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: помилка getpgrp"
+
+#: jobs.c:4447
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: немає керуванн� завданн�ми у тлі"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: алгоритм реалізації р�дків"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "не вдало�� в�тановити групу проце�у дл� термінала (%d)"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "ц� оболонка не може керувати завданн�ми"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: умова не виконуєть��: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d: потрібна умова не виконуєть��\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "невідомий"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: зайн�тий блок у �пи�ку вільних"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: аргумент є вже звільненим блоком"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: блок ще не виділено"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr ""
+"free: ви�влено перехід за нижню границю блоку; mh_nbytes не вкладаєть�� у "
+"рамки"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr ""
+"free: ви�влено перехід за нижню границю блоку; mh_nbytes не вкладаєть�� у "
+"рамки"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: розмір у запи�ах на початку та в кінці блоку відрізн�єть��"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: блок ще не виділено"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr ""
+"realloc: ви�влено перехід за нижню границю блоку; mh_nbytes не вкладаєть�� у "
+"рамки"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr ""
+"realloc: ви�влено перехід за нижню границю блоку; mh_nbytes не вкладаєть�� у "
+"рамки"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: розмір у запи�ах на початку та в кінці блоку відрізн�єть��"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: таблицю виділенн� заповнено FIND_ALLOC?\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: %p вже позначений �к виділений у таблиці?\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: %p вже позначений �к вільний у таблиці?\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "неправильна о�нова"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: невідомий хо�т"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: неправильна �лужба"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: неправильно вказаний мережевий шл�х"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "мережеві операції не підтримують��"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: не вдало�� змінити локаль (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: не вдало�� змінити локаль (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: не вдало�� змінити локаль (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: не вдало�� змінити локаль (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "При�утн� пошта у $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "�ова пошта у $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "Пошту у %s прочитано\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "�интак�ична помилка: потрібен арифметичний вираз"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "�интак�ична помилка: неочікувана `;'"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "�интак�ична помилка: `((%s))'"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: неправильний тип ін�трукції %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr "here-document з р�дка %d закінчено кінцем файла (очікувало�� «%s»)"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr "make_redirection: ін�трукці� пере�пр�муванн� `%d' поза межами"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+"shell_getc: shell_input_line_size (%zu) перевищує обмеженн� SIZE_MAX (%lu): "
+"р�док обрізано"
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr "перевищено мак�имальну можливу кількі�ть here-document"
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "файл �кінчив�� раніше, ніж було знайдено відповідний «%c»"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "файл �кінчив�� раніше, ніж було знайдено `]]'"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "�интак�ична помилка в умовному виразі: неочікувана лек�ема «%s»"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "�интак�ична помилка в умовному виразі"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "неочікувана лек�ема «%s», очікувала�� `)'"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "очікувала�� `)'"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "неочікуваний аргумент унарного умовного оператора «%s»"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "неочікуваний аргумент унарного умовного оператора"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "неочікувана лек�ема «%s», очікував�� бінарний умовний оператор"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "очікував�� бінарний умовний оператор"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "неочікуваний аргумент бінарного умовного оператора «%s»"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "неочікуваний аргумент бінарного умовного оператора"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "неочікувана лек�ема «%c» в умовній команді"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "неочікувана лек�ема «%s» в умовній команді"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "неочікувана лек�ема %d в умовній команді"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "�интак�ична помилка коло неочікуваної лек�еми «%s»"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "�интак�ична помилка коло «%s»"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "�интак�ична помилка: раптово �кінчив�� файл"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "�интак�ична помилка"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Викори�товуйте \"%s\", щоб вийти з оболонки.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "файл �кінчив��, перш ніж було знайдено відповідну `)'"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "завершенн�: функцію «%s» не знайдено"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr "programmable_completion: %s: можливий цикл повторних �проб"
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: NULL COMPSPEC"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: неправильний з’єднувальний оператор `%d'"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: некоректний де�криптор файла"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: нульовий вказівник на файл"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr ""
+"де�криптор файла xtrace (%d) не дорівнює номеру файла у вказівнику xtrace "
+"(%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: «%c»: неправильний �имвол шаблону"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "де�криптор файла поза можливими межами"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: неоднозначне пере�пр�муванн�"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: заборонено перезапи�увати на�вні файли"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: обмеженн�: пере�пр�муванн� виводу заборонене"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "не вдало�� �творити тимча�овий файл дл� here-document: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: не вдало�� надати змінній значенн� де�криптора файла"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "/dev/(tcp|udp)/host/port не підтримуєть��"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "помилка пере�пр�муванн�: не вдало�� �творити копію де�криптора файла"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "не вдало�� знайти /tmp, будь ла�ка �творіть його!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp має бути чинною назвою каталогу"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr ""
+"режим форматованого виведенн� даних у інтерактивних оболонках буде "
+"проігноровано"
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: помилковий параметр"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "не вдало�� в�тановити uid %d: ефективним є uid %d"
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "не вдало�� в�тановити gid %d: ефективним є gid %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr "не вдало�� запу�тити за�іб діагно�тики: режим діагно�туванн� вимкнено"
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr "%s: це каталог"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "У мене нема назви!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, вер�і� %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Викори�товуйте:\t%s [довгий параметр GNU] [параметр] ...\n"
+"\t%s [довгий параметр GNU] [параметр] файл_�ценарію ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "Довгі параметри GNU:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Параметри оболонки:\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-ilrsD чи -c команда чи -O параметр_shopt\t\t(тільки на початку)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s чи -o параметр\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr ""
+"Введіть `%s -c \"help set\"', щоб отримати більше інформації про параметри "
+"оболонки.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr ""
+"Введіть `%s -c help', щоб отримати більше інформації про вбудовані команди "
+"оболонки.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr ""
+"Щоб повідомити про помилку в програмі, викори�товуйте команду `bashbug'.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr "Домашн� �торінка bash: <http://www.gnu.org/software/bash>\n"
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr ""
+"Загальна довідкова інформаці� щодо викори�танн� програмного забезпеченн� "
+"GNU: <http://www.gnu.org/gethelp/>\n"
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: некоректна операці�"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "�ена�вний �игнал"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Зави�анн�"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Перериванн�"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Вихід"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Помилкова ін�трукці�"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "Точка зупину trace/trap"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "Ін�трукці� ABORT"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "Ін�трукці� EMT"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Помилка обчи�лень з рухомою комою"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Вбитий"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Помилка шини"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Помилка адре�уванн�"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Помилковий �и�темний виклик"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "Зламаний канал"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "Таймер"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Припинено"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "�евідкладні події В/В"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Зупинено (�игнал)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Продовженн�"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Зупинка чи припиненн� дочірнього проце�у"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Зупинено (ввід з термінала)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Зупинено (вивід на термінал)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "В/В готовий"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "Обмеженн� ча�у CPU"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "Обмеженн� розміру файла"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Таймер (віртуальний)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Таймер (профілюванн�)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Зміна вікна"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Блокуванн� втрачено"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Сигнал кори�тувача 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Сигнал кори�тувача 2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "Вхідні дані HFT очікують"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "наближаєть�� втрата живленн�"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "наближаєть�� аварійна �итуаці�"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "перене�енн� проце�у на інший CPU"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "помилка програмуванн�"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "Режим монітору HFT надано"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "Режим монітору HFT відкликано"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "Завершено звукову по�лідовні�ть HFT"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "Інформаційний запит"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "�евідомий �игнал №%d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "неправильна заміна: немає заключної «%s» у %s"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: неможливо означити елемент ма�иву �пи�ком"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "не вдало�� �творити канал дл� під�тавл�нн� проце�у"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "не вдало�� �творити дочірній проце� дл� під�тавл�нн� проце�у"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "не вдало�� відкрити іменований канал %s дл� читанн�"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "не вдало�� відкрити іменований канал %s дл� запи�у"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "не вдало�� здублювати іменований канал %s �к fd %d"
+
+#: subst.c:6213
+msgid "command substitution: ignored null byte in input"
+msgstr "заміна команди: проігноровано порожній байт у вхідних даних"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "не вдало�� �творити канал дл� під�тавл�нн� команди"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "не вдало�� �творити дочірній проце� дл� під�тавл�нн� команди"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr ""
+"command_substitute: не вдало�� �творити копію каналу із файловим "
+"де�криптором 1"
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: некоректна назва змінної дл� по�иланн� за назвою"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: некоректне непр�ме розгортанн�"
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr "%s: некоректна назва змінної"
+
+#: subst.c:7256
+#, c-format
+msgid "%s: parameter not set"
+msgstr "%s: параметр не в�тановлено"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: параметр нульової довжини чи не вказаний"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: підр�док коротший за 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: неправильна заміна"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: не можна призначити таким чином"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+"у на�тупних вер�і�х оболонки буде виконувати�� обчи�ленн� дл� заміни "
+"арифметичних виразів"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "неправильна заміна: немає заключної \"`\" у %s"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "нема відповідника: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "очікував�� аргумент"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: очікував�� чи�ловий вираз"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "очікувала�� `)'"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "очікувала�� `)', отримано %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: очікував�� бінарний оператор"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: очікував�� унарний оператор"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "від�утн� `]'"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "�интак�ична помилка: неочікувана `;'"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "неправильний номер �игналу"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr ""
+"обробник па�ток: до��гнуто мак�имального рівн� дл� обробника па�ток (%d)"
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: неправильне значенн� у trap_list[%d]: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps: обробник �игналу є SIG_DFL, %d (%s) повторно над�илаєть�� "
+"�обі"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: неправильний �игнал %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "помилка імпортуванн� означенн� функції «%s»"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "рівень оболонки (%d) занадто ви�окий, перев�тановлено у 1"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: немає контек�ту функції у поточній обла�ті"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: змінною не може бути значенн�, �ке приймають інші змінні"
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr "%s: при�воєнн� цілого чи�ла по�иланню з назвою"
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: немає контек�ту функції у поточній обла�ті"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s має нульове значенн� р�дка ек�портуванн�"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "Помилковий �имвол %d у р�дку ек�порту дл� %s"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "немає `=' у р�дку ек�порту дл� %s"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr ""
+"pop_var_context: перший елемент shell_variables не є контек�том функції"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: немає контек�ту global_variables"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr ""
+"pop_scope: перший елемент shell_variables не є тимча�овим оточенн�м виконанн�"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: не вдало�� відкрити Ф�ЙЛ"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: некоректне значенн� де�криптора файла тра�уванн�"
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s: значенн� �умі�но�ті не належить припу�тимому діапазону значень"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "© Free Software Foundation, Inc., 2012"
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"Ліцензі� GPLv3+: GNU GPL вер�і� 3 чи новіша <http://gnu.org/licenses/gpl."
+"html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, вер�і� %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr ""
+"Це вільне програмне забезпеченн�; ви можете його змінювати та "
+"розпов�юджувати."
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "�е надаєть�� �ІЯКИХ Г�Р��ТІЙ у межах, передбачених законом."
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: не вдало�� виділити %lu байтів (виділено %lu байтів)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: не вдало�� виділити %lu байтів"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: не вдало�� виділити %lu байтів (виділено %lu байтів)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: не вдало�� виділити %lu байтів"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-3] [назва[=значенн�] ...]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] назва [назва ...]"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpsvPSVX] [-m keymap] [-f файл] [-q назва] [-u назва] [-r "
+"по�лідовні�ть-клавіш] [-x по�лідовні�ть-клавіш:команда-оболонки] "
+"[по�лідовні�ть-клавіш:функці�-readline чи команда-readline]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [вбудована-команда [аргумент ...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [вираз]"
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]] [-@]] [каталог]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] команда [аргумент ...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilnrtux] [-p] [назва[=значенн�] ...]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilnrtux] [-p] назва[=значенн�] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [параметр] назва[=значенн�] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [аргумент ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [аргумент ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f файл] [назва ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [аргумент ...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts р�док-параметрів назва [аргумент]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a назва] [команда [аргументи ...]] [пере�пр�муванн� ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr ""
+"fc [-e редактор] [-lnr] [перший] [о�танній] чи fc -s [шаблон=заміна] "
+"[команда]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [завданн�]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [завданн� ...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p шл�х] [-dt] [назва ...]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [шаблон ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d позиці�] [n] чи history -anrw [файл] чи history -ps "
+"аргумент [аргумент ...]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [завданн� ...] чи jobs -x команда [аргументи]"
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [�пецифікаці� завданн� ... | pid ...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s �игнал | -n номер-�игналу | -�игнал] pid | завданн� ... чи kill -l "
+"[�игнал]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let аргумент [аргумент ...]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a ма�ив] [-d роздільник] [-i тек�т] [-n кількі�ть-�имволів] [-"
+"N кількі�ть-�имволів][-p запрошенн�] [-t ліміт-ча�у] [-u де�криптор-файла] "
+"[назва ...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o назва-параметра] [--] [аргумент ...]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [назва ...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [назва[=значенн�] ...] чи export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonli [-af [назва[=значенн�] ...] чи readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source файл [аргументи]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". файл [аргументи]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [вираз]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ аргумент... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[аргумент] �игнал ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] назва [назва ...]"
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [обмеженн�]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [режим-до�тупу]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-fn] [ідентифікатор]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [ідентифікатор-проце�у ...]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for ��ЗВ� [in СЛОВ� ... ] ; do КОМ��ДИ; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( вираз1; вираз2; вираз3 )); do КОМ��ДИ; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select ��ЗВ� [in СЛОВ� ...;] do КОМ��ДИ; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] канал"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case СЛОВО in [Ш�БЛО� [| Ш�БЛО�]...) КОМ��ДИ ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if КОМ��ДИ; then КОМ��ДИ; [ elif КОМ��ДИ; then КОМ��ДИ; ]... [ else "
+"КОМ��ДИ; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while КОМ��ДИ; do КОМ��ДИ; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until КОМ��ДИ; do КОМ��ДИ; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [��ЗВ�] команда [пере�пр�муванн�]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function ��ЗВ� { КОМ��ДИ ; } чи ��ЗВ� () { КОМ��ДИ ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ КОМ��ДИ ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "завданн� [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( вираз ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ вираз ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "variables - назви та значенн� де�ких змінних оболонки"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | каталог]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [назва-параметра ...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v змінна] шаблон-форматуванн� [аргументи]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o параметр] [-A ді�] [-G шаблон-"
+"оболонки] [-W �пи�ок-�лів]  [-F функці�] [-C команда] [-X шаблон-"
+"фільтруванн�] [-P префік�] [-S �уфік�] [назва ...]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o параметр] [-A ді�] [-G шаблон-оболонки] [-W "
+"�пи�ок-�лів]  [-F функці�] [-C команда] [-X шаблон-фільтруванн�] [-P "
+"префік�] [-S �уфік�] [�лово]"
+
+#: builtins.c:239
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o параметр] [-DEI] [назва ...]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-d роздільник] [-n кількі�ть] [-O початок-відліку] [-s кількі�ть] [-"
+"t] [-u де�криптор] [-C обробник] [-c крок] [ма�ив]"
+
+#: builtins.c:244
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-d роздільник] [-n кількі�ть] [-O початок-відліку] [-s кількі�ть] "
+"[-t] [-u де�криптор] [-C обробник] [-c крок] [ма�ив]"
+
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"Додає чи показує п�евдоніми дл� команд.\n"
+"    \n"
+"    Викликана без аргументів, команда `alias' друкує �пи�ок п�евдонімів у\n"
+"    придатній до подальшого виконанн� формі `alias ��ЗВ�=З��ЧЕ��Я'.\n"
+"    \n"
+"    Інакше вона додає п�евдоніми дл� кожної вказаної ��ЗВИ, дл� �кої надане\n"
+"    З��ЧЕ��Я. Пробіли в кінці З��ЧЕ��Я дозвол�ють увімкнути подальше "
+"розкритт�\n"
+"    п�евдонімів у�ередині цього п�евдоніму під ча� його під�тавл�нн�.\n"
+"    \n"
+"    Параметри:\n"
+"      -p\tвиве�ти у�і визначені п�евдоніми у придатній до виконанн� формі.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� невдало, �кщо було вказано ��ЗВУ, дл� �кої немає\n"
+"    п�евдоніма."
+
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Вилучає у�і вказані ��ЗВИ зі �пи�ку визначених п�евдонімів.\n"
+"    \n"
+"    Параметри:\n"
+"      -a\tВилучити визначенн� у�іх п�евдонімів.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Завершуєть�� невдало, �кщо ��ЗВ� не є визначеним п�евдонімом."
+
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"В�тановлює призначенн� клавіш та змінні readline.\n"
+"    \n"
+"    Призначає функції чи макровизначенню readline по�лідовні�ть клавіш чи\n"
+"    в�тановлює змінну readline. �ргумент, що не відно��ть�� до параметрів\n"
+"    має �интак�и� такий же �к у ~/.inputrc, але мають бути вказані �к один\n"
+"    аргумент, наприклад, bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Параметри:\n"
+"      -m  набір          Викори�товувати ��БІР призначень клавіш на ча�\n"
+"                         виконанн� цієї команди. �азви і�нучих наборів: "
+"emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command та vi-insert.\n"
+"      -l                 Виве�ти назви функцій.\n"
+"      -P                 Виве�ти назви функцій та �кі по�лідовно�ті клавіш "
+"їм\n"
+"                         призначено.\n"
+"      -p                 Виве�ти функції та призначенн� у формі, придатній "
+"дл�\n"
+"                         подальшого викори�танн� �к ввід.\n"
+"      -S                 Виве�ти по�лідовно�ті клавіш, �кі запу�кають\n"
+"                         макровизначенн�.\n"
+"      -s                 Виве�ти по�лідовно�ті клавіш, �кі запу�кають\n"
+"                         макровизначенн� у формі, придатній дл� подальшого\n"
+"                         викори�танн� �к ввід.\n"
+"      -V                 Виве�ти назви та значенн� змінних.\n"
+"      -v                 Виве�ти назви та значенн� змінних у формі, що може\n"
+"                         бути надалі викори�тана �к ввід.\n"
+"      -q  функці�        Показати, �кі по�лідовно�ті клавіш запу�кають цю\n"
+"                         функцію.\n"
+"      -u  функці�        Ска�увати у�і призначені цій функції "
+"по�лідовно�ті.\n"
+"      -r  по�лідовні�ть  Ска�увати призначенн� ПОСЛІДОВ�ОСТІ.\n"
+"      -f  файл           Прочитати призначенн� клавіш з Ф�ЙЛУ.\n"
+"      -x  по�лідовні�ть:команда-оболонки\tПри введенні ПОСЛІДОВ�ОСТІ буде\n"
+"    \t\t\t\tзапу�кати�� КОМ��Д�-ОБОЛО�КИ.\n"
+"      -X                 Показати �пи�ок по�лідовно�тей клавіш, пов’�зани з -"
+"x та відповідні\n"
+"                         команди у форматі, �ким можна �кори�тати�� �к "
+"вхідними даними\n"
+"                         дл� іншої програми.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� у�пішно, �кщо вказані правильні параметри та не\n"
+"    виникло помилки під ча� виконанн�."
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Виходить з циклів for, while чи until.\n"
+"    \n"
+"    Перериває цикли FOR, WHILE чи UNTIL. Якщо вказано N, перериває\n"
+"    N вкладених циклів.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� невдало, �кщо N менше за 1."
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Переходить до на�тупної ітерації циклів for, while чи until.\n"
+"    \n"
+"    Переходить до на�тупної ітерації циклу for, while чи until.\n"
+"    Якщо вказане N, перехід відбуваєть�� у N-ному охоплюючому циклі.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� невдало, �кщо N менше 1."
+
+#: builtins.c:354
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Виконує вбудовану команду оболонки.\n"
+"    \n"
+"    Запу�кає ВБУДОВ��У-КОМ��ДУ з вказаними �РГУМЕ�Т�МИ, пошук команди не\n"
+"    робить��. Це може �тати в нагоді, �кщо ви хочете замінити вбудовану\n"
+"    команду функцією оболонки, але вам треба запу�кати вбудовану команду\n"
+"    з�ередини цієї функції.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда повертає код завершенн� ВБУДОВ��ОЇ-КОМ��ДИ або помилку, �кщо\n"
+"    ВБУДОВ���-КОМ��Д� не є вбудованою командою оболонки."
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Повертає контек�т виконанн� поточної підпрограми.\n"
+"    \n"
+"    Якщо ВИР�З не вказано, виводить \"$line $filename\". Інакше виводить\n"
+"    \"$line $subroutine $filename\"; цю додаткову інформацію можна\n"
+"    викори�товувати дл� тра�уванн� �теку.\n"
+"    \n"
+"    Значенн� ВИР�ЗУ визначає на �кільки рівнів викликів підн�ти�� від\n"
+"    поточного; поточний рівень є нульовим.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� невдало, �кщо оболонка зараз не виконує функцію\n"
+"    або �кщо ВИР�З є неправильним."
+
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"Змінює робочий каталог оболонки.\n"
+"    \n"
+"    Змінює поточний каталог на К�Т�ЛОГ. Якщо К�Т�ЛОГ не вказано,\n"
+"    значенн� буде вз�то зі значенн� змінної �ередовища HOME.\n"
+"    \n"
+"    Змінна CDPATH визначає набір каталогів, в �ких �лід шукати К�Т�ЛОГ.\n"
+"    Каталоги у цій змінній розділ�ють�� двокрапкою (:).\n"
+"    Порожн� назва каталогу означає поточний каталог. Якщо К�Т�ЛОГ\n"
+"    починаєть�� з похилої ри�ки (/), CDPATH не викори�товуєть��.\n"
+"    \n"
+"    Якщо каталог не буде знайдено, у разі визначеного параметра оболонки\n"
+"    `cdable_vars', К�Т�ЛОГ вважатиметь�� назвою змінної. Якщо змінна з\n"
+"    такою назвою і�нуватиме, її значенн� буде викори�тане замі�ть К�Т�ЛОГУ.\n"
+"    \n"
+"    Параметри:\n"
+"      -L\tПриму�ово переходити за �имволічними по�иланн�ми: визначати\n"
+"    \tджерело �имволічних по�илань �к К�Т�ЛОГ пі�л� обробки запи�ів `..'.\n"
+"      -P\tВикори�товувати фізичну �труктуру каталогів, не переходити за\n"
+"    \t�имволічними по�иланн�ми: визначати джерело �имволічних по�илань �к\n"
+"    \tК�Т�ЛОГ до обробки запи�ів `..'.\n"
+"      -e\t�кщо вказано параметр -P і програмі не вда�ть�� визначити "
+"поточний\n"
+"    \tробочий каталог, вийти з ненульовим значенн�м �тану.\n"
+"      -@  у �и�темах, де передбачено таку підтримку, показати файл з "
+"розширеними\n"
+"            атрибутами �к каталог, що мі�тить атрибути файла\n"
+"    \n"
+"    Зазвичай команда переходитиме за �имволічними по�иланн�ми, неначе було\n"
+"    вказано параметр `-L'.\n"
+"    `..' обробл�єть�� шл�хом вилученн� компонентів шл�ху до �имволу\n"
+"    похилої ри�ки або за початковим компонентом каталогу К�Т�ЛОГ.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Повертає 0, �кщо каталог було змінено і �кщо було у�пішно в�тановлено "
+"значенн�\n"
+"    $PWD у разі викори�танн� -P. За інших результатів повертає ненульове "
+"значенн�."
+
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"Виводить назву поточного робочого каталогу.\n"
+"    \n"
+"    Параметри:\n"
+"      -L\tВиве�ти значенн� $PWD, �кщо вона вказує поточний робочий каталог.\n"
+"      -P\tВиве�ти фізичне розташуванн� каталогу, без �имволічних по�илань.\n"
+"    \n"
+"    Зазвичай `pwd' працює �к ніби вказано `-L'.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� невдало, �кщо вказано неправильний параметр чи\n"
+"    не вдало�� отримати до�туп до поточного робочого каталогу."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"�ічого не робить.\n"
+"    \n"
+"    �е має жодного ефекту; ц� команда нічого не робить.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завжди у�пішна."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Завершуєть�� у�пішно.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завжди у�пішна."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Завершуєть�� помилково.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завжди завершуєть�� невдало."
+
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Запу�кає звичайну команду чи показує інформацію про команди.\n"
+"    \n"
+"    Запу�кає КОМ��ДУ з �РГУМЕ�Т�МИ, не робл�чи пошуку �еред функцій "
+"оболонки,\n"
+"    чи показує інформацію про вказані КОМ��ДИ. Може викори�товувати�� дл�\n"
+"    запу�ку команд з ди�ку, коли і�нує функці� з такою ж назвою.\n"
+"    \n"
+"    Параметри:\n"
+"      -p   Викори�товувати �тандартне значенн� PATH, �ке забезпечує\n"
+"           знаходженн� у�іх �тандартних утиліт.\n"
+"      -v   Виве�ти опи� КОМ��Д, подібний до виводу вбудованої команди "
+"`type'.\n"
+"      -V   Виве�ти більш багато�лівний опи� кожної з КОМ��Д.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда повертає код завершенн� КОМ��ДИ або помилку, �кщо КОМ��ДУ не "
+"буде\n"
+"    знайдено."
+
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"В�тановлює значенн� та вла�тиво�ті змінних.\n"
+"    \n"
+"    Опи�ує змінні та в�тановлює їх вла�тиво�ті. Якщо ��ЗВИ не вказано,\n"
+"    показує вла�тиво�ті та значенн� у�іх змінних.\n"
+"    \n"
+"    Параметри:\n"
+"      -f\tОбмежити поле дії лише назвами та визначенн�ми функцій.\n"
+"      -F\tОбмежити показ лише назвами функцій (плю� номер р�дку та\n"
+"    \t\tфайл, звідки походить функці�, �кщо виконуєть�� діагно�тика).\n"
+"      -g\t�творити загальні змінні, �кщо викори�тано у функції оболонки,\n"
+"    \t\t�кщо це не функці� оболонки, буде проігноровано.\n"
+"      -p\tПоказати вла�тиво�ті та значенн� кожної з ��ЗВ.\n"
+"    \n"
+"    Параметри, що в�тановлюють вла�тиво�ті:\n"
+"      -a\tЗробити ��ЗВИ індек�ованими ма�ивами (�кщо підтримуєть��).\n"
+"      -A\tЗробити ��ЗВИ а�оціативними ма�ивами (�кщо підтримуєть��).\n"
+"      -i\t�адати ��ЗВ� вла�тиві�ть `ціле чи�ло'.\n"
+"      -n\tЗробити ��ЗВУ по�иланн�м на змінну, вказану �к значенн�\n"
+"      -l\tПереворити значенн� кожної ��ЗВИ до нижнього регі�тру, �кщо ��ЗВИ "
+"визначено.\n"
+"      -r\tЗробити ��ЗВИ незмінними (лише дл� читанн�).\n"
+"      -t\t�адати ��ЗВ�М вла�тиві�ть `trace'.\n"
+"      -u\tПеретворити значенн� кожної ��ЗВИ до верхнього регі�тру, �кщо "
+"��ЗВИ визначено.\n"
+"      -x\tЕк�портувати ��ЗВИ.\n"
+"    \n"
+"    Замінивши `+' на `-' можна вимкнути відповідну вла�тиві�ть.\n"
+"    \n"
+"    При означенні змінні з вла�тиві�тю цілого чи�ла виконуєть�� арифметичне\n"
+"    обчи�ленн� (див. команду `let') значенн�.\n"
+"    \n"
+"    При викори�танні в�ередині функції `declare' робить ��ЗВИ локальними\n"
+"    змінними, �к команда `local'. Параметр `-g' вимикає таку поведінку.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� у�пішно, �кщо вказані правильні параметри і не "
+"виникло\n"
+"    помилки під ча� виконанн�."
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"В�тановлює значенн� та вла�тиво�ті змінних.\n"
+"    \n"
+"    Синонім `declare'. Дивіть�� `help declare'."
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"Опи�ує локальні змінні.\n"
+"    \n"
+"    Створює локальну змінну ��ЗВ� та призначає їй З��ЧЕ��Я. П�Р�МЕТР може "
+"бути\n"
+"    будь-�ким параметром, що приймаєть�� командою `declare'.\n"
+"    \n"
+"    Локальні змінні можуть викори�товувати�� лише у�ередині функції; їх "
+"видно\n"
+"    лише у функції, де їх визначено та її нащадках.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� невдало, �кщо вказано помилкові параметри, "
+"�таєть��\n"
+"    помилка під ча� наданн� змінній значенн� або �кщо оболонка не виконує "
+"функцію."
+
+#: builtins.c:557
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Друкує аргументи до �тандартного виводу.\n"
+"    \n"
+"    Виводить �РГУМЕ�ТИ, відокремлені один від одного одинарним �имволом "
+"пробілу, із\n"
+"    завершальним �имволом розриву р�дка до �тандартного виводу.\n"
+"    \n"
+"    Параметри:\n"
+"      -n\t�е додавати �имвол нового р�дку в кінці.\n"
+"      -e\tУвімкнути інтерпретацію нижченаведених по�лідовно�тей.\n"
+"      -E\tЯвно заборонити інтерпретацію по�лідовно�тей.\n"
+"    \n"
+"    `echo' інтерпретує на�тупні по�лідовно�ті, що починають�� зі зворотньої\n"
+"    похилої ри�ки:\n"
+"      \\a\t�игнал (дзвінок)\n"
+"      \\b\tповерненн� кур�ору\n"
+"      \\c\tне виводити в�е, що далі\n"
+"      \\e\t�имвол escape\n"
+"      \\E\t�имвол escape\n"
+"      \\f\tперехід на р�док нижче\n"
+"      \\n\tпочаток нового р�дку\n"
+"      \\r\tповерненн� до початку р�дку\n"
+"      \\t\tгоризонтальна табул�ці�\n"
+"      \\v\tвертикальна табул�ці�\n"
+"      \\\\\tзворотн� похила ри�ка\n"
+"      \\0nnn\t�имвол з ві�імковим ASCII-кодом NNN. NNN може мати від\n"
+"    \t\tнул� до трьох ві�імкових цифр\n"
+"      \\xHH\tво�ьмибітовий �имвол із ші�тнадц�тковим кодом HH. HH\n"
+"    \t\tможе бути одною чи двома ші�тнадц�тковими цифрами\n"
+"      \\uHHHH\t�имвол Unicode, чиє значенн� є ші�тнадц�тковим чи�лом HHHH.\n"
+"    \t\tHHHH може �кладати�� з одної, двох, трьох або чотирьох "
+"ші�тнадц�ткових цифр.\n"
+"      \\UHHHHHHHH �имвол Unicode, чиє значенн� є ші�тнадц�тковим чи�лом\n"
+"    \t\tHHHHHHHH. HHHHHHHH може мі�тити від однією до во�ьми ші�тнадц�ткових "
+"цифр.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� невдало, �кщо виникне помилка запи�у."
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Друкує аргументи до �тандартного виводу.\n"
+"    \n"
+"    Виводить �РГУМЕ�ТИ до �тандартного виводу з переходом на новий р�док.\n"
+"    \n"
+"    Параметри:\n"
+"      -n\t�е додавати �имвол нового р�дку в кінці.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� невдало, �кщо трапить�� помилка запи�у."
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"Вмикає та вимикає вбудовані команди оболонки.\n"
+"    \n"
+"    Вмикає та вимикає вбудовані команди оболонки. Вимкненн� команди "
+"дозвол�є\n"
+"    вам запу�кати команду з ди�ку, що має таку ж назву, �к і вбудована "
+"команда\n"
+"    оболонки, без потреби вказувати повний шл�х до команди.\n"
+"    \n"
+"    Параметри:\n"
+"      -a\t�адрукувати �пи�ок вбудованих команд, вказуючи чи вони ввімкнені.\n"
+"      -n\tВимкнути кожну з ��ЗВ або надрукувати �пи�ок вимкнених команд.\n"
+"      -p\t�адрукувати �пи�ок вбудованих команд у придатній дл� подальшого\n"
+"    \tвиконанн� формі.\n"
+"      -s\tДрукувати лише назви `�пеціальних' команд Posix.\n"
+"    \n"
+"    Параметри, що контролюють динамічне завантаженн�:\n"
+"      -f\tЗавантажити вбудовану команду ��ЗВ� з колективного об’єктного "
+"Ф�ЙЛУ.\n"
+"      -d\tВилучити вбудовану команду, завантажену за допомогою -f.\n"
+"    \n"
+"    Без параметрів вмикає кожну з ��ЗВ.\n"
+"    \n"
+"    Щоб викори�товувати `test', що знаходить�� де�ь у $PATH замі�ть\n"
+"    вбудованої у оболонку вер�ії, введіть `enable -n test'.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� невдало, �кщо ��ЗВ� не є вбудованою командою\n"
+"    оболонки або �кщо трапить�� помилка під ча� виконанн�."
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Виконує аргументи �к команду оболонки.\n"
+"    \n"
+"    Об’єднує �РГУМЕ�ТИ в один р�док та виконує результат �к команди, "
+"введені\n"
+"    до оболонки.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда повертає результат виконанн� команди. Якщо отриманий р�док "
+"команди\n"
+"    є порожнім р�дком, команда завершуєть�� у�пішно."
+
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"�налізує р�док параметрів.\n"
+"    \n"
+"    Getopts викори�товуєть�� підпрограмами оболонки дл� аналізу позиційних\n"
+"    аргументів �к параметрів командного р�дку.\n"
+"    \n"
+"    РЯДОК-П�Р�МЕТРІВ мі�тить літери параметрів, �кі можуть бути вказані; "
+"�кщо\n"
+"    за літерою іде двокрапка, цей параметр очікує аргументу, відокремленого\n"
+"    від нього пробілом.\n"
+"    \n"
+"    Пі�л� кожного запу�ку getopts кладе на�тупний параметр до змінної "
+"оболонки\n"
+"    $name, �творюючи її, �кщо треба. �омер на�тупного неопрацьованого\n"
+"    аргументу кладеть�� до змінної оболонки OPTIND. OPTIND в�тановлюєть�� у "
+"1\n"
+"    кожного разу, �к запу�каєть�� оболонка чи �крипт. Якщо параметр очікує\n"
+"    аргументу, getopts кладе аргумент до змінної оболонки OPTARG.\n"
+"    \n"
+"    Getopts може повідомл�ти про помилки двома �по�обами. Якщо першим "
+"�имволом\n"
+"    РЯДКУ-П�Р�МЕТРІВ є двокрапка, getopts викори�товує `тихе' повідомленн� "
+"про\n"
+"    помилки. В такому режимі повідомленн� про помилки не вивод�ть��. Якщо "
+"буде\n"
+"    знайдено неправильний параметр, getopts покладе його до OPTARG. Якщо не\n"
+"    буде вказано очікуваний аргумент, getopts покладе ':' до ��ЗВ�, а "
+"�имвол\n"
+"    параметра — до OPTARG. У `гучному' режимі, при з помилками у параметрі у "
+"NAME\n"
+"    кладеть�� '?', а OPTARG �кидаєть��. Якщо потрібний аргумент не вказано, "
+"у\n"
+"    NAME кладеть�� '?', OPTARG �кидаєть�� і друкуєть�� діагно�тичне\n"
+"    повідомленн�.\n"
+"    \n"
+"    Якщо змінна оболонки OPTERR в�тановлена у 0, getopts не друкуватиме\n"
+"    повідомленн� про помилки навіть у `гучному режимі'. Стандартне значенн�\n"
+"    OPTERR — 1.\n"
+"    \n"
+"    Зазвичай getopts аналізує позиційні параметри ($0 - $9), але �кщо "
+"надано\n"
+"    більше аргументів, замі�ть цього аналізують�� вони.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� у�пішно, �кщо знайдено параметр; помилково, �кщо\n"
+"    параметри �кінчили�� або трапила�� помилка."
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"Заміщує оболонку вказаною командою.\n"
+"    \n"
+"    Запу�кає КОМ��ДУ, заміщаючи поточну оболонку вказаною програмою.\n"
+"    �РГУМЕ�ТИ передають�� КОМ��ДІ. Якщо КОМ��ДУ не вказано, будь-�кі\n"
+"    пере�пр�муванн� за�то�овують�� до поточної оболонки.\n"
+"    \n"
+"    Параметри:\n"
+"      -a назва\tПередати ��ЗВУ �к нульовий аргумент КОМ��ДИ.\n"
+"      -c\tЗапу�тити КОМ��ДУ з порожнім оточенн�м.\n"
+"      -l\tПокла�ти ри�ку до нульового аргументу КОМ��ДИ.\n"
+"    \n"
+"    Якщо команду не вда�ть�� запу�тити, неінтерактивна оболонка "
+"завершуєть��,\n"
+"    �кщо тільки не в�тановлено параметр оболонки `execfail'.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� невдало, �кщо команду не буде знайдено або �кщо\n"
+"    трапить�� помилка пере�пр�муванн�."
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Виходить з оболонки.\n"
+"    \n"
+"    Виходить з оболонки, повертаючи �тату� N. Якщо N не вказано, береть��\n"
+"    �тату� о�танньої запущеної команди."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Виходить з оболонки �еан�у.\n"
+"    \n"
+"    Виходить з оболонки �еан�у зі �тату�ом N. Повертає помилку, �кщо "
+"команду\n"
+"    запущено не у оболонці �еан�у."
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"Показує чи запу�кає команди зі �пи�ку попередньо запущених.\n"
+"    \n"
+"    Fc викори�товуєть�� дл� показу чи редагуванн� та подальшого повторного\n"
+"    запу�ку команд з журналу. ПЕРШИЙ та ОСТ���ІЙ можуть вказувати діапазон\n"
+"    або ПЕРШИЙ може бути р�дком, тоді він означатиме о�танню команду, що\n"
+"    починала�� з цього р�дка.\n"
+"    \n"
+"    Параметри:\n"
+"      -e РЕД�КТОР\tВказує редактор. Зазвичай це FCEDIT, EDITOR чи vi,\n"
+"    \t\tщо перше буде знайдене.\n"
+"      -l\tПоказати р�дки журналу, замі�ть редагуванн�.\n"
+"      -n\t�е виводити номери р�дків у �пи�ку.\n"
+"      -r\tПоказувати у зворотньому пор�дку (найновіші першими).\n"
+"    \n"
+"    У форматі `fc -s [шаблон=заміна ...] [команда]', КОМ��Д� запу�каєть��\n"
+"    пі�л� заміни Ш�БЛО�=З�МІ��.\n"
+"    \n"
+"    При викори�танні цієї команди може бути зручним п�евдонім r='fc -s' — "
+"тоді\n"
+"    `r cc' запу�тить о�танню команду, що починаєть�� з `cc', а `r' повторно\n"
+"    виконає о�танню команду.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� зі �тату�ом запущених команд, або помилкою, �кщо\n"
+"    трапить�� помилка."
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Переводить завданн� у пріоритетний режим.\n"
+"    \n"
+"    Переводить З�ВД���Я у пріоритетний режим виконанн� і робить його "
+"поточним\n"
+"    завданн�м. Якщо З�ВД���Я не вказане, береть�� завданн�, �ке оболонка\n"
+"    вважає поточним.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� зі �тату�ом завершенн� завданн�, що переведене\n"
+"    у пріоритетний режим, або помилкою, �кщо трапить�� помилка."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Переводить завданн� у фоновий режим.\n"
+"    \n"
+"    Переводить кожне з З�ВД��Ь у фоновий режим виконанн�, �к ніби їх "
+"запущено\n"
+"    із `&'. Якщо З�ВД���Я не вказані, береть�� завданн�, що оболонка вважає\n"
+"    поточним.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� невдало, �кщо контроль завдань не ввімкнено або "
+"�кщо\n"
+"    трапить�� помилка."
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"Запам’�товує чи показує розміщенн� програм.\n"
+"    \n"
+"    Визначає та запам’�товує повний шл�х до кожної з вказаних програм. Якщо\n"
+"    ��ЗВИ не вказані, показує інформацію про збережені команди.\n"
+"    \n"
+"    Параметри:\n"
+"      -d\tВилучити з кешу розміщенн� ��ЗВ.\n"
+"      -l\tПоказувати у форматі, що можна потім виконати.\n"
+"      -p шл�х\tвикори�товувати ШЛЯХ �к повний шл�х до ��ЗВИ.\n"
+"      -r\tСпорожнити кеш.\n"
+"      -t\tВиве�ти збережені розташуванн� ��ЗВ, вказуючи перед розташуванн�м\n"
+"    \t\tвідповідну ��ЗВУ, �кщо вказано декілька ��ЗВ.\n"
+"    �ргументи:\n"
+"      ��ЗВ�\tКожна з ��ЗВ шукаєть�� у $PATH та додаєть�� до �пи�ку "
+"збережених\n"
+"    \t\tкоманд.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� невдало, �кщо ��ЗВУ не вдало�� знайти або �кщо\n"
+"    вказано помилковий параметр."
+
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Показує інформацію про вбудовані команди.\n"
+"    \n"
+"    Показує коротку довідку з вбудованих команд. Якщо вказано Ш�БЛО�, надає\n"
+"    детальну довідку з у�іх команд, що відповідають цьому Ш�БЛО�У. Якщо "
+"його\n"
+"    не вказано, друкує �пи�ок пунктів довідки.\n"
+"    \n"
+"    Параметри:\n"
+"      -d\tВиве�ти короткий опи� кожного з пунктів.\n"
+"      -m\tПоказати довідку у форматі, подібному до man(1).\n"
+"      -s\tВиве�ти лише короткий опи� �интак�и�у викори�танн� кожної з "
+"команд,\n"
+"    \tщо відповідають Ш�БЛО�У\n"
+"    \n"
+"    �ргументи:\n"
+"      Ш�БЛО�\tШаблон, що визначає тему довідки.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� невдало �кщо Ш�БЛО� не знайдено або �кщо вказано\n"
+"    помилковий параметр."
+
+# WTF??? history list += history + history file ???
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Показує чи змінює �пи�ок попередніх команд.\n"
+"    \n"
+"    Показує �пи�ок журналу команд з номерами р�дків, вказуючи `*' перед "
+"кожним\n"
+"    зміненим р�дком. Якщо вказано аргумент N, показує лише N о�танніх "
+"р�дків.\n"
+"    \n"
+"    Параметри:\n"
+"      -c\tВилучити зі �пи�ку у�і збережені команди.\n"
+"      -d позиці�\tВилучити р�док у ПОЗИЦІЇ (відно�ній). Відлік від'ємних "
+"значень\n"
+"    \t\tпозиції ведеть�� від кінц� �пи�ку журналу\n"
+"    \n"
+"\n"
+"    \n"
+"      -a\tДодати запи�и з поточного �еан�у до файла журналу.\n"
+"      -n\tДодати запи�и, �ких ще немає у �пи�ку з файла журналу, і\n"
+"      \t\tдопи�ати їх до файла журналу.\n"
+"      -r\tПрочитати файл журналу та додати його вмі�т до кінц� �пи�ку.\n"
+"      -w\tЗапи�ати поточний журнал команд до файла журналу.\n"
+"    \n"
+"      -p\tЗробити розкритт� журналу команд на кожному з �РГУМЕ�ТІВ та\n"
+"    \tпоказати результат (без збереженн� у �пи�ку журналу команд).\n"
+"      -s\tДодати �РГУМЕ�ТИ до �пи�ку журналу �к один запи�.\n"
+"    \n"
+"    Якщо вказаний Ф�ЙЛ, його буде викори�тано �к файл журналу команд. "
+"Інакше,\n"
+"    �кщо визначено $HISTFILE, береть�� її значенн�, �кщо ні — ~/."
+"bash_history.\n"
+"    \n"
+"    Якщо змінна $HISTTIMEFORMAT має значенн�, відмінне від порожнього "
+"р�дку,\n"
+"    її буде викори�тано �к шаблон strftime(3) дл� показу ча�ових позначок.\n"
+"    Інакше ча�ові позначки не вивод�ть��.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� у�пішно, �кщо вказано вірні параметри та не "
+"виникло\n"
+"    помилки під ча� виконанн�."
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"Виводить �тан завдань.\n"
+"    \n"
+"    Показує �пи�ок активних завдань. З�ВД���Я обмежує вивід цим завданн�м.\n"
+"    Без параметрів показує �тан у�іх активних завдань.\n"
+"    \n"
+"    Параметри:\n"
+"      -l\tДодатково виводити ідентифікатори проце�ів.\n"
+"      -n\tПоказувати лише проце�и, �тан �ких змінив�� з ча�у о�таннього\n"
+"    \tзвідомленн�.\n"
+"      -p\tПоказувати лише ідентифікатори проце�ів.\n"
+"      -r\tОбмежити вивід поточними завданн�ми.\n"
+"      -s\tОбмежити вивід зупиненими завданн�ми.\n"
+"    \n"
+"    Якщо вказано -x, КОМ��ДУ буде виконано пі�л� заміни у�іх згадок про\n"
+"    завданн� у �РГУМЕ�Т�Х на ідентифікатори головних проце�ів відповідних\n"
+"    завдань.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� у�пішно, �кщо вказано правильні параметри та не\n"
+"    виникло помилки під ча� виконанн�. При викори�танні -x команда\n"
+"    завершуєть�� зі �тату�ом завершенн� КОМ��ДИ."
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"Вилучає завданн� з поточної оболонки.\n"
+"    \n"
+"    Вилучає кожне з З�ВД��Ь з таблиці активних завдань. Якщо З�ВД���Я не\n"
+"    вказано, береть�� завданн�, �ке оболонка вважає поточним.\n"
+"    \n"
+"    Параметри:\n"
+"      -a\tВилучити у�і завданн�, �кщо З�ВД���Я не вказані.\n"
+"      -h\tПозначити З�ВД���Я так, щоб вони не отримали SIGHUP, �кщо "
+"оболонка\n"
+"    \t\tотримає SIGHUP.\n"
+"      -r\tВилучати лише поточні завданн�.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� невдало, �кщо вказано неправильний параметр чи\n"
+"    З�ВД���Я."
+
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"�аді�лати �игнал до завданн�.\n"
+"    \n"
+"    �аді�лати проце�у, вказаному за ідентифікатором проце�у чи завданн�\n"
+"    �игнал, вказаний за його номером чи назвою. Якщо не вказано ані "
+"першого,\n"
+"    ані другого, буде наді�лано SIGTERM.\n"
+"    \n"
+"    Параметри:\n"
+"      -s �игнал\tСИГ��Л є назвою �игналу.\n"
+"      -n �игнал\tСИГ��Л є номером �игналу.\n"
+"      -l\tПерелічити назви �игналів; �кщо за -l ідуть іще аргументи, вони\n"
+"    \t\tвважають�� номерами �игналів, �кі треба показати.\n"
+"      -L\t�инонім до -l\n"
+"    \n"
+"    Kill є вбудованою командою з двох причин: це дозвол�є вказувати\n"
+"    ідентифікатори завдань замі�ть ідентифікаторів проце�ів та дозвол�є\n"
+"    вбивати проце�и, навіть �кщо ви вичерпали ліміт проце�ів.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� у�пішно, �кщо вказані правильні аргументи та не\n"
+"    трапило�� помилки під ча� виконанн�."
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"Обчи�лює арифметичні вирази.\n"
+"    \n"
+"    Обчи�лює кожен �РГУМЕ�Т �к арифметичний вираз. Обчи�ленн� виконуєть�� у\n"
+"    цілих чи�лах фік�ованої довжини без перевірки переповненн�, але в�е ж\n"
+"    діленн� на 0 визначаєть�� і вважаєть�� помилкою. �ижченаведений �пи�ок\n"
+"    операторів згруповано за рівн�ми пріоритету. Їх перелічено у пор�дку\n"
+"    �паданн� пріоритету.\n"
+"    \n"
+"    \tid++, id--\tпо�т-інкремент та по�т-декремент змінної\n"
+"    \t++id, --id\tпре-інкремент та пре-декремент змінної\n"
+"    \t-, +\t\tунарний міну� та плю�\n"
+"    \t!, ~\t\tлогічна та побітова інвер�і�\n"
+"    \t**\t\tпідне�енн� до �тепен�\n"
+"    \t*, /, %\t\tмноженн�, діленн�, залишок\n"
+"    \t+, -\t\tдодаванн�, відніманн�\n"
+"    \t<<, >>\t\tпобітовий з�ув вправо та вліво\n"
+"    \t<=, >=, <, >\tпорівн�нн�\n"
+"    \t==, !=\t\tрівні�ть, нерівні�ть\n"
+"    \t&\t\tпобітове AND\n"
+"    \t^\t\tпобітове XOR\n"
+"    \t|\t\tпобітове OR\n"
+"    \t&&\t\tлогічне AND\n"
+"    \t||\t\tлогічне OR\n"
+"    \tвираз ? вираз : вираз\n"
+"    \t\t\tумовний оператор\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tпри�воєнн�\n"
+"    \n"
+"    Змінні оболонки можуть ви�тупати операндами. �азву змінної буде "
+"замінено\n"
+"    її значенн�м (приведеним до цілого чи�ла фік�ованої довжини) у виразі.\n"
+"    Дл� цього не потрібно в�тановлювати вла�тиві�ть змінної `ціле чи�ло'.\n"
+"    \n"
+"    Оператори обчи�люють�� за пріоритетами. Вкладені вирази у дужках\n"
+"    обчи�люють�� першими та можуть змінювати правила пріоритетів, наведені\n"
+"    вище.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Якщо результатом обчи�ленн� о�таннього �РГУМЕ�ТУ є 0, let повертає 1,\n"
+"    інакше — 0."
+
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"Читає р�док зі �тандартного вводу та розбиває його на пол�.\n"
+"    \n"
+"    Зчитує один р�док зі �тандартного вводу чи з Ф�ЙЛОВОГО-ДЕСКРИПТОР�, "
+"�кщо\n"
+"    вказано параметр -u. Р�док розбиваєть�� на пол� по �ловах, перше �лово\n"
+"    призначуєть�� першій ��ЗВІ, друге �лово — другій ��ЗВІ тощо, �кщо\n"
+"    залишать�� непризначені �лова, їх буде призначено о�танній ��ЗВІ. Як\n"
+"    роздільники полів розпізнають�� �имволи, вказані у змінній $IFS.\n"
+"    \n"
+"    Якщо ��ЗВ не вказано, р�док цілком буде збережено у змінній REPLY.\n"
+"    \n"
+"    Параметри:\n"
+"      -a ма�ив\tПризначити прочитані �лова по�лідовним елементам М�СИВУ,\n"
+"    \t\tпочинаючи з нульового.\n"
+"      -d роздільник\tЧитати ввід доки не знайдеть�� �имвол РОЗДІЛЬ�ИК\n"
+"    \t\t(замі�ть кінц� р�дка, �к звичайно).\n"
+"      -e\t\tВикори�товувати Readline дл� отриманн� р�дку.\n"
+"      -i тек�т\tВказати початковий ТЕКСТ дл� Readline.\n"
+"      -n кількі�ть\tПрипинити пі�л� зчитуванн� КІЛЬКОСТІ �имволів, замі�ть\n"
+"    \t\tтого, щоб чекати на кінець р�дка.\n"
+"      -N кількі�ть\tПрипинити, лише пі�л� читанн� КІЛЬКОСТІ �имволів, �кщо\n"
+"    \t\t�еред них не ви�вить�� �имволі кінц� файла або не буде перевищено\n"
+"    \t\tча� очікуванн�, ігнорувати роздільники.\n"
+"      -p запрошенн�\tВиве�ти р�док З�ПРОШЕ��Я (без переведенн� р�дка в "
+"кінці)\n"
+"    \t\tперед читанн�м.\n"
+"      -r\t\t�е обробл�ти зворотню похилу ри�ку дл� екрануванн� �имволів.\n"
+"      -s\t\t�е виводити отриманий ввід на термінал.\n"
+"      -t ліміт-ча�у\tПрипинити читанн� та вийти з помилкою �кщо за вказаний\n"
+"    \t\tпроміжок ча�у (в �екундах) не було прочитано р�док цілком. Значенн�\n"
+"    \t\tзмінної TMOUT є �тандартним значенн�м обмеженн� за ча�ом. ЛІМІТ-"
+"Ч�СУ\n"
+"    \t\tможе бути дробовим чи�лом. Якщо ЛІМІТ-Ч�СУ 0, read завершуєть��\n"
+"    \t\tу�пішно, лише �кщо ввід вже на�вний на вказаному файловому\n"
+"    \t\tде�крипторі. Якщо перевищено термін очікуванн�, код завершенн� буде\n"
+"    \t\tбільшим за 128.\n"
+"       -u файловий-де�криптор\tЧитати ввід з Ф�ЙЛОВОГО-ДЕСКРИПТОРУ замі�ть\n"
+"    \t\t�тандартного вводу.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда повертає помилку, �кщо знайдено кінець файла, �кщо вичерпано "
+"ча�\n"
+"    очікуванн� (значенн�, більше за 128), �кщо �тала�� помилка під ча�\n"
+"    в�тановленн� значенн� змінної, або �кщо із -u вказано неправильний "
+"файловий де�криптор."
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"Повертаєть�� з функції оболонки.\n"
+"    \n"
+"    Виходить з функції чи �ценарію, виконаного за допомогою source зі "
+"вказаним\n"
+"    кодом завершенн� N. Якщо N не вказане, return повертає �тату� о�танньої\n"
+"    виконаної в�ередині �ценарію чи функції команди.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда повертає N, або помилку, �кщо викликана не у функції чи �ценарії."
+
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"В�тановлює та �кидає параметри оболонки та позиційні параметри.\n"
+"    \n"
+"    Змінює значенн� вла�тиво�тей оболонки та позиційних параметрів чи "
+"показує\n"
+"    назви та значенн� змінних оболонки.\n"
+"    \n"
+"    Параметри:\n"
+"      -a  Ек�портувати змінні, �кі будуть змінювати�� чи �творювати��.\n"
+"      -b  Сповіщати про припиненн� завдань негайно.\n"
+"      -e  Завершити роботу, �кщо одна з команд завершить�� помилкою.\n"
+"      -f  Вимкнути розкритт� шаблонів назв файлів (globbing).\n"
+"      -h  Запам’�товувати розміщенн� команд по мірі викори�танн�.\n"
+"      -k  Перено�ити у�і аргументи-при�воєнн� до оточенн� команди, не лише "
+"Ñ‚Ñ–,\n"
+"          що йдуть перед назвою команди.\n"
+"      -m  Ввімкнути контроль завдань.\n"
+"      -n  Читати команди, але не виконувати їх.\n"
+"      -o параметр\n"
+"          В�тановити параметр оболонки:\n"
+"              allexport    те �аме, що й -a\n"
+"              braceexpand  те �аме, що й -B\n"
+"              emacs        викори�товувати подібний до emacs інтерфей�\n"
+"                           редагуванн�\n"
+"              errexit      те �аме, що й -e\n"
+"              errtrace     те �аме, що й -E\n"
+"              functrace    те �аме, що й -T\n"
+"              hashall      те �аме, що й -h\n"
+"              histexpand   те �аме, що й -H\n"
+"              history      ввімкнути збереженн� журналу команд\n"
+"              ignoreeof    не виходити з оболонки пі�л� зчитуванн� кінц� "
+"файла\n"
+"              interactive-comments\n"
+"                           дозволити коментарі у інтерактивній оболонці\n"
+"              keyword      те �аме, що й -k\n"
+"              monitor      те �аме, що й -m\n"
+"              noclobber    те �аме, що й -C\n"
+"              noexec       те �аме, що й -n\n"
+"              noglob       те �аме, що й -f\n"
+"              nolog        наразі приймаєть��, але ігноруєть��\n"
+"              notify       те �аме, що й -b\n"
+"              nounset      те �аме, що й -u\n"
+"              onecmd       те �аме, що й -t\n"
+"              physical     те �аме, що й -P\n"
+"              pipefail     кодом завершенн� ланцюжка команд є код "
+"завершенн�\n"
+"                           о�танньої команди, що завершила�� невдало, або\n"
+"                           нуль, �кщо у�і команди завершили�� у�пішно\n"
+"              posix        змінити поведінку bash у �итуаці�х, де її "
+"поведінка\n"
+"                           зазвичай відхил�єть�� від �тандарту Posix так, "
+"щоб\n"
+"                           вона відповідала �тандарту\n"
+"              privileged   те �аме, що й -p\n"
+"              verbose      те �аме, що й -v\n"
+"              vi           викори�товувати подібний до vi інтерфей�\n"
+"                           редагуванн� р�дку\n"
+"              xtrace       те �аме, що й -x\n"
+"      -p  Ввімкнений, �кщо дій�ний та ефективний ідентифікатори кори�тувача "
+"не\n"
+"          збігають��. Вимикає обробку файла $ENV та імпортуванн� функцій\n"
+"          оболонки. Вимиканн� цього параметра в�тановлює ефективні\n"
+"          ідентифікатори кори�тувача та групи у реальні.\n"
+"      -t  Завершити роботу пі�л� зчитуванн� та виконанн� однієї команди.\n"
+"      -u  Обробл�ти неозначені змінні �к помилку під ча� їх під�тавл�нн�.\n"
+"      -v  Друкувати р�дки вводу по мірі їх читанн�.\n"
+"      -x  Друкувати команди та їх аргументи при їх виконанні.\n"
+"      -B  Виконувати розкритт� дужок.\n"
+"      -C  Вмиканн� параметра заборон�є перезапи� на�вних звичайних файлів\n"
+"          пере�пр�муванн�м виводу.\n"
+"      -E  Якщо ввімкнений, па�тка ERR у�падковуєть�� функці�ми оболонки.\n"
+"      -H  Ввімкнути під�тавл�нн� журналу за допомогою !. Цей параметр "
+"зазвичай\n"
+"          ввімкнено у інтерактивних оболонках.\n"
+"      -P  �е переходити за �имволічними по�иланн�ми при запу�ку команд,\n"
+"          таких �к cd, �ка змінює поточний каталог.\n"
+"      -T  Якщо ввімкнений, па�тки DEBUG і RETURN будуть у�падковувати�� "
+"функці�ми\n"
+"          оболонки.\n"
+"      --  Призначити в�і аргументи, �кі ще не призначено до позиційних "
+"параметрів.\n"
+"          Якщо в�і аргументи вже призначено, позиційні параметри "
+"вважатимуть��\n"
+"          нев�тановленими.\n"
+"      -   Призначити аргументи, що залишили�� позиційним параметрам.\n"
+"          Параметри -x та -v вимикають��.\n"
+"    \n"
+"    Вимкнути параметр можна вказавши + замі�ть -. Параметри можна змінювати\n"
+"    й пі�л� запу�ку оболонки. �аразі ввімкнені параметри можна побачити у\n"
+"    змінній $-. Залишкові аргументи вважають�� позиційними параметрами\n"
+"    та призначають�� по пор�дку відповідно до $1 $2, .. $n. Якщо �РГУМЕ�ТИ "
+"не\n"
+"    вказані, виводить�� �пи�ок у�іх змінних оболонки.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� у�пішно, �кщо вказані правильні параметри."
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"Скидає значенн� та параметри змінних та функцій оболонки.\n"
+"    \n"
+"    Вилучає змінні чи функції, вказані за ��ЗВ�МИ.\n"
+"    \n"
+"    Параметри:\n"
+"      -f\t��ЗВИ є функці�ми оболонки.\n"
+"      -v\t��ЗВИ є змінними оболонки.\n"
+"      -n\t��ЗВИ є по�иланн�ми на назви, визначенн� �амих змінних "
+"�ка�овуєть��.\n"
+"    \n"
+"    Без параметрів, unset �початку намагаєть�� �кинути змінну, �кщо це не\n"
+"    вда�ть��, тоді функцію.\n"
+"    \n"
+"    Де�кі змінні не можуть бути �кинутими; див. `readonly'.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� невдало, �кщо вказано неправильний параметр чи "
+"��ЗВ�\n"
+"    до�тупна лише дл� читанн�."
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Вмикає вла�тиві�ть ек�портуванн� змінних оболонки.\n"
+"    \n"
+"    Позначає кожну з ��ЗВ дл� ек�порту до �ередовища запущених надалі "
+"команд.\n"
+"    Якщо вказане З��ЧЕ��Я, призначає З��ЧЕ��Я перед тим, �к ек�портувати.\n"
+"    \n"
+"    Параметри:\n"
+"      -f\tПрацювати з функці�ми оболонки.\n"
+"      -n\tВимкнути вла�тиві�ть ек�портуванн� дл� у�іх ��ЗВ.\n"
+"      -p\tВиве�ти �пи�ок у�іх ек�портованих змінних та функцій.\n"
+"    \n"
+"    �ргумент `--' вимикає подальший аналіз параметрів.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� у�пішно, �кщо вказано правильні параметри та ��ЗВИ."
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"Робить змінні оболонки незмінними.\n"
+"    \n"
+"    Позначає кожну з ��ЗВ �к незмінну; пі�л� цього значенн� ��ЗВИ не можуть\n"
+"    бути змінені призначенн�м. Якщо вказане З��ЧЕ��Я, воно призначаєть��, "
+"перш\n"
+"    ніж змінну буде позначено незмінною.\n"
+"    \n"
+"    Параметри:\n"
+"      -a\tПрацювати з індек�ованими ма�ивами.\n"
+"      -A\tПрацювати з а�оціативними ма�ивами.\n"
+"      -f\tПрацювати з функці�ми оболонки.\n"
+"      -p\tВиве�ти �пи�ок в�іх незмінних змінних та функцій, залежно від\n"
+"            того, чи вказано параметр -f.\n"
+"    \n"
+"    �ргумент `--' вимикає подальший аналіз параметрів.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� у�пішно, �кщо вказано правильні параметри та ��ЗВИ."
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"З�уває позиційні параметри.\n"
+"    \n"
+"    Перейменовує позиційні параметри $N+1,$N+2 ... у $1,$2 ... Якщо N не\n"
+"    вказане, береть�� 1.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� невдало, �кщо N менше за нуль чи більше за $#."
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Виконує команди з файла у поточній оболонці.\n"
+"    \n"
+"    Читає та виконує команди з Ф�ЙЛУ у поточній оболонці. Елементи $PATH\n"
+"    викори�товують�� при пошуку Ф�ЙЛУ. Якщо вказані �РГУМЕ�ТИ, вони �тають\n"
+"    позиційними параметрами при запу�ку Ф�ЙЛУ.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда повертає код завершенн� о�танньої команди, виконаної у Ф�ЙЛІ, "
+"або\n"
+"    помилку, �кщо Ф�ЙЛ не вдало�� прочитати."
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Призупин�є виконанн� оболонки.\n"
+"    \n"
+"    Призупин�є виконанн� оболонки до отриманн� �игналу SIGCONT. Зазвичай,\n"
+"    оболонки �еан�у не можуть бути призупинені.\n"
+"    \n"
+"    Параметри:\n"
+"      -f\tПризупинити, навіть �кщо це оболонка �еан�у.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� невдало, �кщо не ввімкнене керуванн� завданн�ми чи\n"
+"    �кщо трапить�� помилка."
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"Перевір�є умовний вираз.\n"
+"    \n"
+"    Завершуєть�� з кодом 0 (і�тинний) чи 1 (хибний), залежно від\n"
+"    результату обчи�ленн� ВИР�ЗУ. Вирази можуть бути унарними чи бінарними.\n"
+"    Унарні вирази ча�то викори�товують�� дл� визначенн� вла�тиво�тей "
+"файлів.\n"
+"    Також є оператори дл� р�дків та дл� порівн�нн� чи�ел.\n"
+"    \n"
+"    Файлові оператори:\n"
+"    \n"
+"      -a файл        І�тинний, �кщо файл і�нує.\n"
+"      -b файл        І�тинний, �кщо файл є блоковим при�троєм.\n"
+"      -c файл        І�тинний, �кщо файл є �имвольним при�троєм.\n"
+"      -d файл        І�тинний, �кщо файл є каталогом.\n"
+"      -e файл        І�тинний, �кщо файл і�нує.\n"
+"      -f файл        І�тинний, �кщо файл і�нує та є звичайним файлом.\n"
+"      -g файл        І�тинний, �кщо файл має в�тановлений біт `set-group-"
+"id'.\n"
+"      -h файл        І�тинний, �кщо файл є �имволічним по�иланн�м.\n"
+"      -L файл        І�тинний, �кщо файл є �имволічним по�иланн�м.\n"
+"      -k файл        І�тинний, �кщо файл має в�тановленим біт `sticky'.\n"
+"      -p файл        І�тинний, �кщо файл є іменованим каналом.\n"
+"      -r файл        І�тинний, �кщо ви можете читати файл.\n"
+"      -s файл        І�тинний, �кщо файл і�нує і не є порожнім.\n"
+"      -S файл        І�тинний, �кщо файл є �окетом.\n"
+"      -t де�криптор  І�тинний, �кщо де�криптор відкритий у терміналі.\n"
+"      -u файл        І�тинний, �кщо файл має в�тановлений біт `set-user-"
+"id'.\n"
+"      -w файл        І�тинний, �кщо ви можете запи�увати до файла.\n"
+"      -x файл        І�тинний, �кщо ви можете виконати файл.\n"
+"      -O файл        І�тинний, �кщо ви є вла�ником файла.\n"
+"      -G файл        І�тинний, �кщо ваша група є вла�ником файла.\n"
+"      -N файл        І�тинний, �кщо файл був змінений пі�л� о�таннього\n"
+"                     читанн�\n"
+"    \n"
+"      файл1 -nt файл2  І�тинний, �кщо файл1 новіший за файл2 (за датою "
+"зміни).\n"
+"    \n"
+"      файл1 -ot файл2  І�тинний, �кщо файл1 �таріший за файл2.\n"
+"    \n"
+"      файл1 -ef файл2  І�тинний, �кщо файл1 є жор�тким по�иланн�м на файл2.\n"
+"    \n"
+"    Оператори з р�дками:\n"
+"    \n"
+"      -z р�док       І�тинний, �кщо р�док порожній.\n"
+"    \n"
+"      -n р�док\n"
+"         р�док       І�тинний, �кщо р�док не порожній.\n"
+"    \n"
+"      р�док1 = р�док2\n"
+"                     І�тинний, �кщо р�дки однакові.\n"
+"      р�док1 != р�док2\n"
+"                     І�тинний, �кщо р�дки не однакові.\n"
+"      р�док1 < р�док2\n"
+"                     І�тинний, �кщо при лек�икографічному �ортуванні р�док1\n"
+"                     буде іти перед р�дком\n"
+"      р�док1 > р�док2\n"
+"                     І�тинний, �кщо при лек�икографічному �ортуванні р�док1\n"
+"                     ітиме пі�л� р�дка2.\n"
+"    \n"
+"    Інші оператори:\n"
+"    \n"
+"      -o параметр    І�тинний, �кщо параметр оболонки ввімкнено.\n"
+"      -v ЗМІ���\t І�тинний, �кщо в�тановлено змінну �ередовища ЗМІ���\n"
+"      -R ЗМІ���\t І�тинний, �кщо в�тановлено змінну �ередовища ЗМІ��� і ц� "
+"змінна є по�иланн�м на назву.\n"
+"      ! вираз        І�тинний, �кщо вираз хибний.\n"
+"      вираз1 -a вираз2  І�тинний, �кщо обидва вирази і�тинні.\n"
+"      вираз1 -o вираз2  І�тинний, �кщо хоч один з виразів і�тинний.\n"
+"    \n"
+"      аргумент1 ОПЕР�ТОР аргумент2\n"
+"                     �рифметичне порівн�нн�. ОПЕР�ТОР може бути: -eq, -ne,\n"
+"                     -lt, -le, -gt, чи -ge.\n"
+"    \n"
+"    �рифметичні бінарні оператори і�тинні, �кщо аргумент1 рівний, не "
+"рівний,\n"
+"    менший, менший чи рівний, більший, чи більший чи рівний аргументу2.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� у�пішно, �кщо ВИР�З і�тинний; невдало, �кщо "
+"вказано\n"
+"    помилковий аргумент чи ВИР�З хибний."
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"Перевір�є умовний вираз.\n"
+"    \n"
+"    Це �инонім до вбудованої команди \"test\", але на відміну від неї "
+"о�таннім\n"
+"    аргументом має бути `]'."
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Показує ча� виконанн� проце�у.\n"
+"    \n"
+"    Виводить збірний ча� виконанн� оболонки та в�іх її нащадків на рівні\n"
+"    кори�тувача та на рівні �и�теми.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завжди у�пішна."
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"Перехоплює �игнали чи інші події.\n"
+"    \n"
+"    Визначає та активує обробники дл� отриманих оболонкою �игналів чи інших\n"
+"    подій.\n"
+"    \n"
+"    �РГУМЕ�Т є командою, �ку буде запущено оболонкою при отриманні\n"
+"    СИГ��ЛУ(ІВ). Якщо �РГУМЕ�Т не вказано (а СИГ��Л вказано) або вказано\n"
+"    `-' �к �РГУМЕ�Т, кожен вказаний СИГ��Л в�тановлюєть�� у його\n"
+"    початковий �тан. Якщо �РГУМЕ�Т є порожнім р�дком, СИГ��Л(И) буде\n"
+"    ігнорувати�� оболонкою та запущеними з неї командами.\n"
+"    \n"
+"    Якщо СИГ��Л є EXIT (0), �РГУМЕ�Т буде виконано при виході з оболонки. "
+"Якщо\n"
+"    СИГ��Л є DEBUG, �РГУМЕ�Т буде виконувати�� перед кожною про�тою "
+"командою.\n"
+"    \n"
+"    Якщо аргументи взагалі не вказано, trap покаже �пи�ок команд,\n"
+"    призначених до �игналів.\n"
+"    \n"
+"    Параметри:\n"
+"      -l\tВиве�ти �пи�ок �игналів та їх номерів.\n"
+"      -p\tПоказати команди, призначені СИГ��Л�М.\n"
+"    \n"
+"    Кожен з СИГ��ЛІВ має бути або назвою �игналу з <signal.h> або номером\n"
+"    номером �игналу. �азви �игналів нечутливі до регі�тру літер, префік� "
+"SIG\n"
+"    необов’�зковий. Сигнал можна наді�лати оболонці за допомогою\n"
+"    \"kill -signal $$\".\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� у�пішно, �кщо вказані правильні параметри та "
+"СИГ��ЛИ."
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"Показує тип команди.\n"
+"    \n"
+"    Дл� кожної ��ЗВИ показує, �к її буде оброблено �к назву команди.\n"
+"    \n"
+"    Параметри:\n"
+"      -a\tПоказати у�і можливі інтерпретації ��ЗВИ; �кщо не вказано\n"
+"    \tпараметр `-p', охоплює також п�евдоніми, вбудовані команди, функції.\n"
+"      -f\t�е шукати �еред функцій оболонки.\n"
+"      -P\tВиводити лише ди�кові команди, знайдені за PATH.\n"
+"      -p\tВиве�ти лише назву файла на ди�ку, або нічого.\n"
+"      -t\tВиве�ти одне �лово, що вказує тип — `alias', `keyword',\n"
+"    \t`function', `builtin', `file' чи `', �кщо ��ЗВ�, відповідно, є\n"
+"    \tп�евдонімом, зарезервованим �ловом оболонки, функцією оболонки\n"
+"    \tвбудованою командою оболонки, файлом на ди�ку чи не знайдене.\n"
+"    \n"
+"    �ргументи:\n"
+"      ��ЗВ�\tназва команди дл� інтерпретації.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� у�пішно, �кщо буде знайдено у�і ��ЗВИ; невдало, "
+"�кщо\n"
+"    хоч одне з них не вда�ть�� знайти."
+
+#: builtins.c:1431
+#, fuzzy
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Змінює обмеженн� ре�ур�ів оболонки.\n"
+"    \n"
+"    Дозвол�є керувати до�тупними оболонці та �твореним нею проце�ам "
+"ре�ур�ами,\n"
+"    �кщо це підтримуєть�� �и�темою.\n"
+"    \n"
+"    Параметри:\n"
+"      -S\tВикори�товувати `soft' обмеженн�.\n"
+"      -H\tВикори�товувати `hard' обмеженн�.\n"
+"      -a\t�адати звіт про поточні обмеженн�.\n"
+"      -b\tРозмір буфера �окетів.\n"
+"      -c\tМак�имальний розмір файла дампу пам’�ті.\n"
+"      -d\tМак�имальний розмір �егменту даних проце�у.\n"
+"      -e\tМак�имальний пріоритет виконанн� (`nice').\n"
+"      -f\tМак�имальний розмір файлів, запи�аних оболонкою та нащадками.\n"
+"      -i\tМак�имальна кількі�ть �игналів, що очікують обробки.\n"
+"      -k\tМак�имальна кількі�ть k-черг, визначених дл� цього проце�у\n"
+"      -l\tМак�имальний розмір, �кий проце� може заблокувати в пам’�ті.\n"
+"      -m\tМак�имальний розмір резидентного набору.\n"
+"      -n\tМак�имальна кількі�ть відкритих файлових де�крипторів.\n"
+"      -p\tРозмір буфера каналу.\n"
+"      -q\tМак�имальний розмір повідомленн� у чергах повідомлень POSIX\n"
+"    \t(у байтах).\n"
+"      -r\tМак�имальний пріоритет виконанн� у реальному ча�і.\n"
+"      -s\tМак�имальний розмір �теку.\n"
+"      -t\tМак�имальний ча� викори�танн� проце�ору (у �екундах).\n"
+"      -u\tМак�имальна кількі�ть проце�ів кори�тувача.\n"
+"      -v\tРозмір віртуальної пам’�ті.\n"
+"      -x\tМак�имальна кількі�ть блокувань файлів.\n"
+"      -T    мак�имальна кількі�ть потоків обобки\n"
+"    \n"
+"    Перелік до�тупних параметрів залежить від програмної платформи.\n"
+"    \n"
+"    Якщо вказане ОБМЕЖЕ��Я, воно в�тановлюєть�� �к нове значенн� обмеженн�\n"
+"    викори�танн� вказаного ре�ур�у; �пеціальні значенн� ОБМЕЖЕ��Я `soft',\n"
+"    `hard', та `unlimited' означають, відповідно, поточне м’�ке обмеженн�,\n"
+"    поточне жор�тке обмеженн� та від�утні�ть обмежень. Якщо ОБМЕЖЕ��Я не\n"
+"    вказане, виводить�� поточне значенн� вказаного ре�ур�у. Якщо не вказано\n"
+"    жодного параметра, береть�� -f.\n"
+"    \n"
+"    Значенн� можуть змінювати�� із кроком у 1024 байти, за вин�тком -t,\n"
+"    що вказуєть�� в �екундах, -p, �ке має крок 512 байтів та -u, що є\n"
+"    кількі�тю проце�ів без кроку.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� невдало, �кщо вказано неправильний параметр чи\n"
+"    трапила�� помилка під ча� виконанн�."
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"В�тановлює чи показує ма�ку дозволів дл� файлів.\n"
+"    \n"
+"    В�тановлює М�СКУ дозволів дл� �творених файлів. Якщо М�СКУ не вказано,\n"
+"    виводить поточне значенн� ма�ки.\n"
+"    \n"
+"    Якщо М�СК� починаєть�� з цифри, вона вважаєть�� ві�імковим чи�лом;\n"
+"    �кщо ні — вона має бути р�дком �имвольного режиму, подібним до того, що\n"
+"    викори�товуєть�� chmod(1).\n"
+"    \n"
+"    Параметри:\n"
+"      -p\tЯкщо М�СКУ не вказано, виве�ти її у формі, придатній дл� "
+"виконанн�.\n"
+"      -S\tВиводити у �имвольному режимі; інакше виводить�� ві�імкове чи�ло.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� у�пішно, �кщо вказано правильну М�СКУ та параметри."
+
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"Чекає завершенн� виконанн� завданн� та повертає його код завершенн�.\n"
+"    \n"
+"    Очікує завершенн� роботи проце�у, вказаного за ІДЕ�ТИФІК�ТОРОМ, що може\n"
+"    бути ідентифікатором проце�у чи завданн�, та повертає його код "
+"завершенн�.\n"
+"    Якщо ІДЕ�ТИФІК�ТОР не вказано, очікує завершенн� у�іх активних дочірніх\n"
+"    проце�ів та повертає код 0. Якщо ІДЕ�ТИФІК�ТОР є завданн�м, очікує на\n"
+"    завершенн� у�іх проце�ів у ланцюжку завданн�.\n"
+"    \n"
+"    Якщо вказано параметр -n, очікує на завершенн� на�тупного завданн�\n"
+"    і повертає його код завершенн�.\n"
+"    \n"
+"    Якщо вказано параметр -f і увімкнено керуванн� завданн�ми, очікує на\n"
+"    вказаний ідентифікатор дл� перериванн�, замі�ть очікуванн� на зміну\n"
+"    його �тану.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда повертає код завершенн� вказаного завданн�; помилку, �кщо "
+"вказано\n"
+"    неправильні параметри чи ІДЕ�ТИФІК�ТОР."
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"Очікує на завершенн� роботи проце�у та повертає його код завершенн�.\n"
+"    \n"
+"    Очікує, поки завершить�� вказаний проце�, та доповідає про його "
+"у�пішні�ть.\n"
+"    Якщо ІДЕ�ТИФІК�ТОР-ПРОЦЕСУ не вказаний, очікує завершенн� у�іх дочірніх\n"
+"    проце�ів й завершуєть�� з кодом 0. ІДЕ�ТИФІК�ТОР має бути "
+"ідентифікатором\n"
+"    проце�у.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда повертає код завершенн� проце�у з о�таннім вказаним "
+"ідентифікатором.\n"
+"    Повертає код помилки, �кщо вказано неправильний ІДЕ�ТИФІК�ТОР чи "
+"параметр."
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Виконати команди дл� кожного з пунктів �пи�ку.\n"
+"    \n"
+"    Цикл `for' виконує по�лідовні�ть команд дл� кожного елементу �пи�ку.\n"
+"    Якщо `in СЛОВ� ...;' не вказано, тоді береть�� `in \"$@\"'. ��ЗВ�\n"
+"    по�лідовно в�тановлюєть�� у кожне зі СЛІВ, потім виконують�� КОМ��ДИ.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда повертає код завершенн� о�танньої виконаної команди."
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"�рифметичний цикл.\n"
+"    \n"
+"    Те ж �аме, що й\n"
+"    \t(( ВИР�З1 ))\n"
+"    \twhile (( ВИР�З2 )); do\n"
+"    \t\tКОМ��ДИ\n"
+"    \t\t(( ВИР�З3 ))\n"
+"    \tdone\n"
+"    ВИР�ЗИ мають бути арифметичними виразами. Якщо будь-�кий з них не\n"
+"    вказаний, цикл поводить��, �к ніби його результатом є 1.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда повертає код завершенн� о�танньої виконаної команди."
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Пропонує вибрати �лово та виконує відповідні команди.\n"
+"    \n"
+"    СЛОВ� розгортають��, утворюючи �пи�ок �лів. Отриманий �пи�ок �лів\n"
+"    виводить�� пронумерованим до �тандартного виводу помилок. Якщо `in "
+"СЛОВ�'\n"
+"    не вказано, береть�� `in \"$@\"'. Тоді виводить�� запрошенн� PS3 та зі\n"
+"    �тандартного вводу зчитуєть�� р�док. Якщо цей р�док є чи�лом, що вказує\n"
+"    номер одного зі �лів, ��ЗВ� в�тановлюєть�� у це �лово. Якщо р�док "
+"порожній,\n"
+"    СЛОВ� та запрошенн� вивод�ть�� знов. Якщо прочитано кінець файла, "
+"команда\n"
+"    завершуєть��. Якщо р�док мі�тить що�ь інше, ��ЗВІ призначаєть�� "
+"порожній\n"
+"    р�док. Прочитаний р�док зберігаєть�� у змінній REPLY. Пі�л� кожного\n"
+"    зчитуванн� виконують�� КОМ��ДИ. Команда продовжує виконанн� доки не\n"
+"    буде викликано команду break.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда повертає код завершенн� о�танньої виконаної команди."
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"Доповідає про ча� виконанн� ланцюжка команд.\n"
+"    \n"
+"    Виконує Л��ЦЮЖОК та, по його завершенні, друкує звіт про ча� проце�ора,\n"
+"    витрачений кори�тувачем, �и�темою та �умарно на виконанн� Л��ЦЮЖК�.\n"
+"    \n"
+"    Параметри:\n"
+"      -p\tДрукує звіт у форматі, що відповідає �тандарту POSIX.\n"
+"    \n"
+"    Ча� виводить�� у форматі, вказаному у змінній TIMEFORMAT.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда повертає код завершенн� Л��ЦЮЖК�-КОМ��Д."
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Вибірково виконує команди відповідно до шаблону.\n"
+"    \n"
+"    Вибірково виконує КОМ��ДИ, залежно від відповідно�ті СЛОВ� Ш�БЛО�У.\n"
+"    Декілька шаблонів можуть бути вказані через `|'.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда повертає код завершенн� о�танньої виконаної команди."
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Виконує команди відповідно до умови.\n"
+"    \n"
+"    КОМ��ДИ з `if КОМ��ДИ' виконують��, і �кщо їх код завершенн� нульовий,\n"
+"    виконують�� КОМ��ДИ з `then КОМ��ДИ'. Інакше в �вою чергу виконують��\n"
+"    команди з `elif КОМ��ДИ', і �кщо їх код завершенн� нульовий, "
+"виконують��\n"
+"    КОМ��ДИ з відповідного `then КОМ��ДИ'. Інакше виконують�� КОМ��ДИ з\n"
+"    `else КОМ��ДИ'. Блоки elif та else не обов’�зкові.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда повертає код завершенн� о�танньої виконаної команди або нуль,\n"
+"    �кщо жодна з перевірених умов не була і�тинною."
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Циклічно виконує команди поки виконуєть�� умова.\n"
+"    \n"
+"    Виконуватиме КОМ��ДИ, поки о�танн� команда з КОМ��Д у `while'\n"
+"    не завершить�� невдало.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда повертає код завершенн� о�танньої виконаної команди."
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Виконує команди доки умову не буде виконано.\n"
+"    \n"
+"    Виконуватиме КОМ��ДИ, поки о�танн� команда з КОМ��Д у `until'\n"
+"    не завершить�� у�пішно.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда повертає код завершенн� о�танньої виконаної команди."
+
+# WTF? How can it return exit code of _asynchronous_ process...
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"Створює �півпроце� з назвою ��ЗВ�.\n"
+"    \n"
+"    Починає а�инхронне виконанн� КОМ��ДИ, під’єднавши її �тандартний ввід "
+"та\n"
+"    вивід через канали до файлових де�крипторів, �кі при�воюють�� елементам "
+"0\n"
+"    та 1 змінної-ма�иву ��ЗВ�.\n"
+"    Стандартна назва змінної — \"COPROC\".\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда coproc повертає �тан виходу 0."
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"Опи�ує функцію оболонки.\n"
+"    \n"
+"    Створює функцію оболонки з назвою ��ЗВ�. Функці� запу�каєть�� �к "
+"звичайна\n"
+"    команда з назвою ��ЗВ� та по�лідовно виконує КОМ��ДИ. �ргументи до "
+"команди\n"
+"    призначають�� на ча� виконанн� змінним $1...$n, а назва функції — "
+"змінній\n"
+"    $FUNCNAME.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� невдало, �кщо ��ЗВ� є незмінною."
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Групує команди в один блок.\n"
+"    \n"
+"    Виконує згрупований набір команд. Це один з методів перенаправленн� "
+"виводу\n"
+"    групи команд.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Кон�трукці� повертає код завершенн� о�танньої виконаної команди."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"Продовжує виконанн� завданн� на передньому плані.\n"
+"    \n"
+"    Продовжує на передньому плані виконанн� призупиненого чи фонового\n"
+"    завданн�, �к це робить команда `fg'. З�ВД���Я може бути назвою чи "
+"номером\n"
+"    завданн�. Якщо пі�л� З�ВД���Я вказано `&', завданн� продовжує виконанн� "
+"у\n"
+"    фоні, тобто команда має ефект команди `bg'.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда повертає �тату� продовженого завданн�."
+
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"Обчи�лює арифметичний вираз.\n"
+"    \n"
+"    Обчи�лює ВИР�З відповідно до правил арифметичного розкритт�. Те ж �аме,\n"
+"    що й \"let ВИР�З\".\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� у�пішно, �кщо результат обчи�ленн� ненульовий."
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"Виконує умовну команду.\n"
+"    \n"
+"    Повертає �тату� 0 чи 1, в залежно�ті від результату обчи�ленн� умовного\n"
+"    ВИР�ЗУ. Вирази �кладають�� з тих �амих �кладових, що викори�товують�� у\n"
+"    вбудованій команді `test', але можуть також комбінувати�� за допомогою:\n"
+"    \n"
+"      ( ВИР�З )\t\tПовертає значенн� ВИР�ЗУ.\n"
+"      ! ВИР�З\t\tІ�тинний, �кщо ВИР�З хибний.\n"
+"      ВИР�З1 && ВИР�З2\tІ�тинний, �кщо обидва ВИР�ЗИ і�тинні.\n"
+"      ВИР�З1 || ВИР�З2\tІ�тинний, �кщо хоч один з ВИР�ЗІВ і�тинний.\n"
+"    \n"
+"    Якщо за�то�овують�� оператори `==' та `!=', р�док з правої �торони\n"
+"    вважаєть�� шаблоном, й проводить�� перевірка на відповідні�ть цьому\n"
+"    шаблону. При за�то�уванні `=~' р�док зліва вважаєть�� регул�рним\n"
+"    виразом, відно�но �кого перевір�єть�� правий р�док.\n"
+"    \n"
+"    Оператори && та || не обчи�люють ВИР�З2, �кщо ВИР�ЗУ1 до�татньо дл�\n"
+"    визначенн� результату.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� у�пішно, �кщо ВИР�З і�тинний."
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"Загальні назви змінних оболонки та їхнє викори�танн�.\n"
+"    \n"
+"    BASH_VERSION\tІнформаці� щодо вер�ії Bash.\n"
+"    CDPATH\tРозділений двокрапкою �пи�ок каталогів, у �ких оболонка буде\n"
+"    \t\tшукати каталоги, вказані команді `cd'.\n"
+"    GLOBIGNORE\tРозділений двокрапкою �пи�ок шаблонів назв файлів, �кі "
+"будуть\n"
+"    \t\tігнорувати�� під ча� розкритт� шл�хів.\n"
+"    HISTFILE\t�азва файла, де зберігаєть�� і�торі� команд.\n"
+"    HISTFILESIZE\t�айбільша дозволена кількі�ть запи�ів у файлі журналу.\n"
+"    HISTSIZE\t�айбільша кількі�ть запи�ів, �кі може викори�товувати\n"
+"    \t\tпоточна оболонка.\n"
+"    HOME\tПовний шл�х до вашої домівки.\n"
+"    HOSTNAME\t�азва поточної машини.\n"
+"    HOSTTYPE\tТип проце�ора, на �кому виконуєть�� оболонка.\n"
+"    IGNOREEOF\tВизначає реакцію оболонки на �имвол кінц� файла на вводі.\n"
+"    \t\tЯкщо змінна визначена, її значенн� є кількі�тю таких �имволів,\n"
+"    \t\tщо можуть бути отримані під р�д й бути проігнорованими. Звичайне\n"
+"    \t\tзначенн� — 10. Якщо змінна не визначена, �имвол кінц� файла\n"
+"    \t\tозначатиме кінець вводу.\n"
+"    MACHTYPE\tР�док, що опи�ує поточну �и�тему, на �кій виконуєть�� Bash.\n"
+"    MAILCHECK\tВизначає ча�тоту перевірки пошти оболонкою.\n"
+"    MAILPATH\tРозділений двокрапкою �пи�ок файлів, �кі оболонка буде\n"
+"    \t\tперевір�ти на на�вні�ть нової пошти.\n"
+"    OSTYPE\tВаріант Unix, на �кому виконуєть�� оболонка.\n"
+"    PATH\tРозділений двокрапкою �пи�ок каталогів, де оболонка шукатиме\n"
+"    \t\tвиконувані файли команд.\n"
+"    PROMPT_COMMAND\tКоманда, �ку оболонка буде виконувати перш ніж виве�ти\n"
+"    \t\tо�новне запрошенн� вводу.\n"
+"    PS1\t\tР�док о�новного запрошенн� вводу.\n"
+"    PS2\t\tР�док вторинного запрошенн� вводу.\n"
+"    PWD\t\tПовний шл�х до поточного каталогу.\n"
+"    SHELLOPTS\tРозділений двокрапкою �пи�ок увімкнених параметрів оболонки.\n"
+"    TERM\tТип поточного термінала.\n"
+"    TIMEFORMAT\tФормат виводу ча�у командою `time'.\n"
+"    auto_resume\tЯкщо в�тановлена, введені команди, що �кладають�� з\n"
+"    \t\tодного �лова, �початку будуть шукати�� у �пи�ку поточних\n"
+"    \t\tпризупинених завдань. Якщо таке завданн� буде знайдене, йому буде\n"
+"    \t\tнадано пріоритет. Значенн� цієї змінної `exact' означає,\n"
+"    \t\tщо �лово має точно відповідати команді у �пи�ку завдань. Значенн�\n"
+"    \t\t`substring' означає, що �лово має мі�тити�� у команді завданн�.\n"
+"    \t\tБудь-�ке інше значенн� означає, що команда завданн� має\n"
+"    \t\tпочинати�� з вказаного �лова.\n"
+"    histchars\tСимволи, що викори�товують�� дл� розкритт� журналу та\n"
+"    \t\tшвидкої заміни. Перший �имвол є �имволом під�тавл�нн� журналу,\n"
+"    \t\tзазвичай це `!'.  Другий — �имвол «швидкої заміни», зазичай `^'.\n"
+"    \t\tТретій — �имвол «коментар� журналу», зазвичай це `#'.\n"
+"    HISTIGNORE\tРозділений двокрапкою �пи�ок шаблонів, що викори�товують��\n"
+"    \t\tпри визначенні, чи зберігати команду у �пи�ку журналу.\n"
+
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Додає каталоги до �пи�ку збережених каталогів.\n"
+"    \n"
+"    Додає каталог на вершину �теку каталогів, чи циклічно обертає\n"
+"    �тек, в�тановлюючи поточний робочий каталог відповідно до його нової\n"
+"    вершини. Без аргументів мін�є мі�ц�ми дві найвищих каталоги.\n"
+"    \n"
+"    Параметри:\n"
+"      -n\t�е робити звичайного переходу у новий каталог при додаванні\n"
+"    \t\tкаталогів до �теку, проводити операції лише над �теком.\n"
+"    \n"
+"    �ргументи:\n"
+"      +N\tЦиклічно обертає �тек так, щоб N-ний каталог, рахуючи\n"
+"    \t\tзліва (починаючи з нул�) у �пи�ку, що виводить�� командою `dirs'\n"
+"    \t\tопинила�� на вершині �теку.\n"
+"    \n"
+"      -N\tЦиклічно обертає �тек так, щоб N-ний каталог, рахуючи\n"
+"    \t\tз кінц� (починаючи з нул�) у �пи�ку, що виводить�� командою `dirs'\n"
+"    \t\tопинив�� на вершині �теку.\n"
+"    \n"
+"      К�Т�ЛОГ\tДодає К�Т�ЛОГ на вершину �теку і робить його поточним\n"
+"    \t\t\tробочим каталогом.\n"
+"    \n"
+"    Вбудована команда `dirs' показує �тек каталогів.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� невдало, �кщо вказаний неправильний аргумент чи\n"
+"    �кщо не вдало�� змінити поточну каталог."
+
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Вилучає каталоги зі �пи�ку збережених каталогів.\n"
+"    \n"
+"    Вилучає каталоги зі �теку збережених каталогів. Якщо аргументи не\n"
+"    вказані, вилучає верхній каталог �теку і змінює поточний каталог\n"
+"    відповідно до нової вершини �теку.\n"
+"    \n"
+"    Параметри:\n"
+"      -n\t�е виконувати звичайного переходу до нового каталогу при "
+"вилученні\n"
+"    \t\tкаталогів зі �теку, проводити операції лише над �теком.\n"
+"    \n"
+"    �ргументи:\n"
+"      +N\tВилучає N-ний зліва каталог у �пи�ку, що показуєть�� командою\n"
+"    \t\t`dirs' (відлік починаєть�� з нул�). Приклад: `popd +0' вилучає\n"
+"    \t\tперший каталог, `popd +1' — другий.\n"
+"    \n"
+"      -N\tВилучає N-ний з кінц� каталог у �пи�ку, що показуєть��\n"
+"    \t\tкомандою `dirs' (відлік починаєть�� з нул�). Приклад: `popd -0'\n"
+"    \t\tвилучає о�танній каталог, `popd -1' — передо�танній.\n"
+"    \n"
+"    Вбудована команда `dirs' показує �пи�ок збережених каталогів.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� невдало, �кщо вказано помилковий аргумент чи �кщо\n"
+"    не вдало�� змінити поточний каталог."
+
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Показує �пи�ок збережених каталогів.\n"
+"    \n"
+"    Показує �пи�ок збережених каталогів. Каталоги додають�� до цього �пи�ку\n"
+"    командою `pushd'; ви можете повернути�� назад по цьому �пи�ку за "
+"допомогою\n"
+"    команди `popd'.\n"
+"    \n"
+"    Параметри:\n"
+"      -c\tСпорожнити �пи�ок каталогів, вилучивши у�і його елементи.\n"
+"      -l\t�е викори�товувати ~ при виводі каталогів, що знаход�ть��\n"
+"    \t\tу�ередині вашої домівки.\n"
+"      -p\tВиводити каталоги по одній на р�док.\n"
+"      -v\tВиводити каталоги по одній на р�док із вказанн�м позиції у\n"
+"    \t\t�пи�ку.\n"
+"    \n"
+"    �ргументи:\n"
+"      +N\tПоказує N-ний зліва каталог у �пи�ку, що виводить�� командою\n"
+"    \t\tdirs без аргументів, відлік починаєть�� з нул�.\n"
+"    \n"
+"      -N\tПоказує N-ний з кінц� каталог у �пи�ку, що виводить��\n"
+"    \t\tкомандою dirs без аргументів, відлік починаєть�� з нул�.    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� невдало, �кщо вказано неправильний параметр чи "
+"�кщо\n"
+"    трапить�� помилка."
+
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"В�тановлює та �кидає параметри оболонки.\n"
+"    \n"
+"    Змінює значенн� П�Р�МЕТРІВ. Якщо аргументи П�Р�МЕТРИ не вказані, "
+"виводить\n"
+"    �пи�ок у�іх вказаних параметрів оболонки. Якщо ж параметрів не вказано,\n"
+"    виводить �пи�ок у�іх параметрів, вказуючи, чи параметр ввімкнений, чи "
+"ні.\n"
+"    \n"
+"    Параметри:\n"
+"      -o\tПриймати лише П�Р�МЕТРИ, з �кими працює `set -o'.\n"
+"      -p\tВиве�ти �пи�ок параметрів оболонки та їх поточний �тан.\n"
+"      -q\t�е виводити нічого.\n"
+"      -s\tВвімкнути (в�тановити) кожен з П�Р�МЕТРІВ.\n"
+"      -u\tВимкнути (�кинути) кожен з П�Р�МЕТРІВ.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� у�пішно, �кщо П�Р�МЕТР ввімкнено; невдало, �кщо\n"
+"    вказано неправильні параметри чи П�Р�МЕТР вимкнено."
+
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"Форматує та виводить аргументи відповідно до шаблону ФОРМ�Т.\n"
+"    \n"
+"    Параметри:\n"
+"      -v змінна\tПризначити результат змінній оболонки, замі�ть\n"
+"    \t\tвиведенн� його до �тандартного виводу.\n"
+"    \n"
+"    Ш�БЛО� �кладаєть�� з �имволів, �кі можуть належати до трьох типів:\n"
+"    звичайні �имволи, �кі про�то копіюють�� у вивід; �пеціальні\n"
+"    по�лідовно�ті, �кі інтерпретують��, а потім копіюють�� у вивід; та\n"
+"    вказівки форматуванн�, замі�ть кожної з �ких під�тавл�єть�� відповідний\n"
+"    аргумент.\n"
+"    \n"
+"    Окрім �тандартних вказівок форматуванн�, опи�аних у printf(1)б\n"
+"    printf також розуміє:\n"
+"    \n"
+"      %b\tІнтерпретувати �пеціальні по�лідовно�ті (що починають�� зі\n"
+"    \t\tзворотної похилої ри�ки) у відповідному аргументі.\n"
+"      %q\tВз�ти аргумент в лапки так, щоб його можна було викори�тати �к\n"
+"    \t\tввід оболонки\n"
+"       %(формат)T – виве�ти р�док дати і ча�у з викори�танн�м ФОРМ�ТУ\n"
+"            дл� форматуванн� даних strftime(3)\n"
+"    \n"
+"    Визначене форматуванн� викори�товуєть�� так, щоб було оброблено у�і "
+"аргументи.\n"
+"    Якщо аргументів ви�вить�� менше за кількі�ть визначених форматів, дл� "
+"зайвих\n"
+"    �пецифікаторів форматів буде викори�тано нульові значенн� або порожні "
+"р�дки,     залежно від типу форматуванн�.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� невдало лише �кщо вказано неправильний параметр "
+"або\n"
+"    �кщо трапить�� помилка запи�у чи при�воєнн�."
+
+#: builtins.c:1971
+#, fuzzy
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Вказує, �к буде завершувати аргументи readline.\n"
+"    \n"
+"    Визначає �к завершувати аргументи дл� ��ЗВ. Якщо параметри не вказано,\n"
+"    буде виведено поточні вказівки завершенн� аргументів у формі,\n"
+"    придатній дл� подальшого виконанн�.\n"
+"    \n"
+"    Параметри:\n"
+"      -p\tВиве�ти вказівки доповненн� у формі, придатній до виконанн�.\n"
+"      -r\tВилучити вказівки доповненн� аргументів дл� ��ЗВ (або, �кщо\n"
+"    \t\t��ЗВ не вказано, у�і вказівки завершенн�).\n"
+"      -D\tза�то�увати доповненн� та дії �к типові дл� команд\n"
+"    \tбез визначених вказівок щодо доповненн�.\n"
+"      -E\tза�то�увати доповненн� та дії до «порожніх» команд, �проби --\n"
+"    \tзавершенн� на порожньому р�дку.\n"
+"      -I\tза�то�овувати доповненн� та дій до початкового �лова\n"
+"    \t\t(зазвичай, команди)\n"
+"    \n"
+"    Якщо виконуєть�� �проба доповненн�, дії виконують�� у пор�дку, в �кому\n"
+"    вказані наведені вище параметри у верхньому регі�трі. Якщо вказано\n"
+"    декілька параметрів, параметр -D має пріоритет над параметром -E,\n"
+"    а обидва ці параметри мають пріоритет над параметром -I.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� у�пішно, �кщо вказано правильні параметри та не\n"
+"    трапить�� помилки під ча� виконанн�."
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Показати можливі завершенн� залежно від параметрів.\n"
+"    \n"
+"    Команда призначена дл� викори�танн� з�ередини функції дл� генерації\n"
+"    можливих завершень. Якщо вказано необов’�зковий аргумент СЛОВО,\n"
+"    генерують�� завершенн�, що відповідають цьому �лову.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� у�пішно, �кщо вказано правильні параметри і не\n"
+"    трапить�� помилки під ча� виконанн�."
+
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"Змінює чи показує параметри завершенн� аргументів.\n"
+"    \n"
+"    Змінює параметри завершенн� аргументів дл� ��ЗВ (�кщо ��ЗВИ не вказано,\n"
+"    дл� завершенн�, що наразі виконуєть��). Якщо П�Р�МЕТРИ не вказані,\n"
+"    виводить параметри завершенн� дл� кожної з ��ЗВ (чи завершенн�, що\n"
+"    наразі виконуєть��).\n"
+"    \n"
+"    Параметри:\n"
+"    \t-o параметр\tУвімкнути параметр завершенн� дл� в�іх ��ЗВ.\n"
+"    \t-D\t\tЗмінити параметри дл� доповненн� \"типових\" команд\n"
+"    \t-E\t\tЗмінити параметри дл� доповненн� \"порожніх\" команд\n"
+"    \t-I\t\tЗмінити параметри дл� доповненн� за початковим �ловом\n"
+"    \n"
+"    Параметри можна вимикати, викори�товуючи `+o' замі�ть `-o'.\n"
+"    \n"
+"    �ргументи:\n"
+"    \n"
+"    Кожна з ��ЗВ відповідає команді, дл� �кої попередньо має бути вказано,\n"
+"    �к завершувати її аргументи за допомогою вбудованої команди `complete'.\n"
+"    Якщо ��ЗВ не вказано, compopt має виконувати�� у�ередині функції, що\n"
+"    генерує �пи�ок завершень, тоді змінюють�� параметрі вказівки завершень,\n"
+"    що відповідає цій функції.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� у�пішно, �кщо вказано правильні параметри та\n"
+"    вказівки завершень дл� ��ЗВ і�нують."
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"Читає р�дки зі �тандартного вводу й зано�ить їх до ма�иву.\n"
+"    \n"
+"    Читає р�дки зі �тандартного вводу чи з Ф�ЙЛОВОГО-ДЕСКРИПТОР�, �кщо "
+"вказано\n"
+"    параметр -u, і в�тавл�є їх до вказаної змінної-ма�иву. Якщо назву "
+"змінної\n"
+"    не вказано, викори�товуєть�� змінна MAPFILE.\n"
+"    \n"
+"    Параметри:\n"
+"      -d роздільник\tВикори�тати дл� поділу на р�дки вказаний роздільник, а "
+"не\n"
+"         �имвол розриву р�дка\n"
+"      -n кількі�ть\tПрочитати вказану кількі�ть р�дків. �уль означає\n"
+"    \t\t\t«без обмежень».\n"
+"      -O початок\tПочати в�тавл�ти до ма�иву з вказаного\n"
+"    \t\t\tелемента ма�иву. Зазвичай відлік починаєть�� з нул�.\n"
+"      -s кількі�ть\tПропу�тити вказану кількі�ть р�дків на початку\n"
+"    \t\t\tфайла.\n"
+"      -t\t\tПрибирати �имвол переведенн� р�дку в кінці прочитаних\n"
+"    \t\t\tз файла р�дків.\n"
+"      -u де�криптор\tЧитати р�дки з вказаного де�криптора замі�ть\n"
+"    \t\t\t�тандартного вводу\n"
+"      -C обробник\tВиконувати вказаний обробник пі�л� прочитанн� р�дка.\n"
+"      -c крок\t\tВикликати обробник лише пі�л� того, �к буде прочитано\n"
+"    \t\t\tвказану кількі�ть р�дків.\n"
+"    \n"
+"    �ргументи:\n"
+"      М�СИВ\t\t�азва змінної-ма�иву дл� збереженн� даних з файла.\n"
+"    \n"
+"    Якщо вказано лише -C, без -c, обробник викликатиметь�� із кроком 5000.\n"
+"    Обробник викликаєть�� із параметром, що вказує на�тупний елемент "
+"ма�иву,\n"
+"    �кому буде призначено значенн�.\n"
+"    \n"
+"    Якщо початковий елемент не вказано, mapfile �порожнить М�СИВ, перш ніж\n"
+"    починати при�воєнн�.\n"
+"    \n"
+"    Код завершенн�:\n"
+"    Команда завершуєть�� невдало лише �кщо вказано неправильний параметр "
+"або\n"
+"    �кщо М�СИВ є незмінним."
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"Читає р�дки з файла до ма�иву.\n"
+"    \n"
+"    Синонім до `mapfile'."
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "Повертає контек�т поточної підпрограми.\n"
+#~ "    \n"
+#~ "    Якщо EXPR не вказано, повертає "
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process: проце� %5ld (%s) у the_pipeline"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "�евідомий �игнал №"
+
+#~ msgid "Copyright (C) 2018 Free Software Foundation, Inc."
+#~ msgstr "© Free Software Foundation, Inc., 2018"
+
+#~ msgid "Copyright (C) 2014 Free Software Foundation, Inc."
+#~ msgstr "© Free Software Foundation, Inc., 2014"
+
+#~ msgid ":"
+#~ msgstr ":"
+
+#~ msgid "true"
+#~ msgstr "true"
+
+#~ msgid "false"
+#~ msgstr "false"
+
+#~ msgid "times"
+#~ msgstr "times"
+
+#~ msgid "Copyright (C) 2009 Free Software Foundation, Inc.\n"
+#~ msgstr "© Free Software Foundation, Inc., 2009\n"
+
+#~ msgid ""
+#~ "License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl."
+#~ "html>\n"
+#~ msgstr ""
+#~ "Ліцензі� GPLv2+: GNU GPL вер�і� 2 чи новіша <http://gnu.org/licenses/gpl."
+#~ "html>\n"
+
+#~ msgid "xrealloc: cannot reallocate %lu bytes (%lu bytes allocated)"
+#~ msgstr ""
+#~ "xrealloc: не вдаєть�� змінити розмір виділеного блоку до %lu байтів "
+#~ "(виділено %lu байтів)"
+
+#~ msgid "xrealloc: cannot allocate %lu bytes"
+#~ msgstr "xrealloc: не вдаєть�� виділити %lu байтів"
+
+#~ msgid "xrealloc: %s:%d: cannot reallocate %lu bytes (%lu bytes allocated)"
+#~ msgstr ""
+#~ "xrealloc: %s:%d: не вдаєть�� змінити розмір виділеного блоку до %lu "
+#~ "байтів (виділено %lu байтів)"
diff --git a/po/vi.gmo b/po/vi.gmo
new file mode 100644
index 0000000..256ec8e
--- /dev/null
+++ b/po/vi.gmo
diff --git a/po/vi.po b/po/vi.po
new file mode 100644
index 0000000..583c705
--- /dev/null
+++ b/po/vi.po
@@ -0,0 +1,5841 @@
+# Vietnamese translation for BASH (Bourne Again SHell).
+# Bản dịch tiếng Việt dành cho bash.
+# Copyright © 2015 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+# Clytie Siddall <clytie@riverland.net.au>, 2008, 2009, 2010.
+# Nguyễn Thái Ng�c Duy <pclouds@gmail.com>, 2012.
+# Trần Ng�c Quân <vnwildman@gmail.com>, 2012-2014, 2015.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: bash 4.4-beta1\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2015-10-18 07:47+0700\n"
+"Last-Translator: Trần Ng�c Quân <vnwildman@gmail.com>\n"
+"Language-Team: Vietnamese <translation-team-vi@lists.sourceforge.net>\n"
+"Language: vi\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"X-Generator: Gtranslator 2.91.7\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "sai chỉ số mảng"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr ""
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: không thể chuyển đổi mảng kiểu chỉ số sang mảng kết hợp"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: khóa mảng liên kết không hợp lệ"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: không thể gán cho chỉ số không thuộc kiểu số"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr "%s: %s: phải sử dụng chỉ số phụ khi gán mảng kết hợp"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: không thể tạo: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr ""
+"bash_execute_unix_command: không tìm thấy ánh xạ phím (keymap) cho câu lệnh"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: ký tự khác khoảng trắng đầu tiên không phải là “\"�"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "thiếu dấu đóng “%c� trong %s"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: thiếu dấu hai chấm phân cách"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "“%s�: không thể tháo"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr "khai triển ngoặc ôm: không thể phân bổ bộ nhớ cho %s"
+
+#: braces.c:406
+#, fuzzy, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr "khai triển ngoặc ôm: gặp lỗi khi phân bổ bộ nhớ cho “%d� phần tử"
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr "khai triển ngoặc ôm: gặp lỗi khi phân bổ bộ nhớ cho “%s�"
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "“%s�: tên bí danh không hợp lệ"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "chưa bật sửa đổi dòng"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "“%s�: tên sơ đồ phím không hợp lệ"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: không thể đ�c: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "“%s�: không hiểu tên hàm"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s không được ràng buộc với bất kỳ phím nào.\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s có thể được g�i thông qua "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "“%s�: không thể tháo"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "đếm vòng"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "chỉ có nghĩa trong vòng lặp “for�, “while� hay “until�"
+
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"Trả v� ngữ cảnh của lệnh g�i hàm hiện th�i.\n"
+"\n"
+"    Không có BTHỨC thì trả lại \"$line $filename\".  Có BTHỨC thì trả\n"
+"    lại \"$line $subroutine $filename\"; thông tin bổ sung này có thể\n"
+"    được dùng để cung cấp stack trace.\n"
+"\n"
+"    Giá trị của BTHỨC thì ngụ ý bao nhiêu lần g�i cần lùi lại đằng\n"
+"    trước lệnh g�i hiện tại; khung g�i đầu là khung 0.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại 0 trừ khi hệ v� đang chạy hàm hệ v�, BTHỨC cũng hợp lệ."
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "Chưa đặt biến môi trư�ng HOME"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "quá nhi�u đối số"
+
+#: builtins/cd.def:342
+#, fuzzy
+msgid "null directory"
+msgstr "không có thư mục khác"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "Chưa đặt biến môi trư�ng OLDPWD"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "dòng %d: "
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "cảnh báo: "
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: cách dùng: "
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: tùy ch�n cần một đối số"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: cần đối số thuộc kiểu số"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s: không tìm thấy"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: tùy ch�n không hợp lệ"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: tên tùy ch�n không hợp lệ"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "“%s�: không phải là định danh hợp lệ"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "số bát phân không hợp lệ"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "số thập lục không hợp lệ"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "số không hợp lệ"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: sai đặc tả tín hiệu"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "“%s�: không phải một pid hoặc đặc tả công việc hợp lệ"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: biến chỉ đ�c"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s nằm ngoài phạm vi"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "đối số"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s nằm ngoài phạm vi"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: không có công việc như vậy"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s: không có đi�u khiển công việc"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "không có đi�u khiển công việc"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s: bị hạn chế"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "bị hạn chế"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s: không phải là lệnh tích hợp trong hệ v�"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "lá»—i ghi: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "lỗi đặt các thuộc tính thiết bị cuối: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "lỗi lấy các thuộc tính thiết bị cuối: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s: lỗi lấy thư mục hiện th�i: %s: %s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: đặc tả công việc chưa rõ ràng"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr "trợ giúp không sẵn có ở phiên bản này"
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: không thể hủy đặt: %s chỉ đ�c"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: không thể hủy đặt"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: tên hành động không hợp lệ"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: không có đặc tả tự hoàn thiện"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "cảnh báo: tùy ch�n “-F� có thể không hoạt động như mong đợi"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "cảnh báo: tùy ch�n “-C� có thể không hoạt động như bạn mong đợi"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "hiện th�i không thực thi chức năng tự hoàn thiện"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "chỉ có thể dùng trong một hàm"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr "%s: biến tham chiếu không thể là một mảng"
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr "%s: biến nameref tự tham chiếu là không được phép"
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s: tên tham chiếu quẩn tròn"
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, fuzzy, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "%s: tên biến không hợp lệ cho một tham chiếu tên"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "không thể dùng “-f� để tạo hàm"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: hàm chỉ đ�c"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr "%s: gán mảng phức hợp được trích dẫn đã lạc hậu"
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: không thể hủy biến mảng bằng cách này"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: không thể chuyển đổi mảng kết hợp sang mảng chỉ số"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "không có chức năng nạp động"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "không thể mở đối tượng dùng chung %s: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "không tìm thấy %s trong đối tượng dùng chung %s: %s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s không được tải động"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr "tải hàm cho %s trả v� lỗi nghiêm tr�ng (%d): nên không được tải"
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s không được tải động"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: không thể xóa: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: là thư mục"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: không phải là tập tin thư�ng"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: tập tin quá lớn"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: không thể thực hiện tập tin nhị phân"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: không thể thực thi: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "đăng xuất\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "không phải hệ v� đăng nhập: hãy dùng lệnh “exit�"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Có công việc bị dừng.\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Có công việc đang chạy.\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "không tìm thấy lệnh"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "đặc tả lịch sử"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: không thể mở tập tin tạm: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "hiện tại"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "công việc %d đã khởi chạy mà không có đi�u khiển công việc"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: tùy ch�n không được phép -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: tùy ch�n cần đối số -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "tắt băm"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: bảng băm rỗng\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "gợi ý\tlệnh\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Câu lệnh hệ v� tương ứng với từ khóa “"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"không có trợ giúp cho “%s�. Hãy chạy lệnh “help help� hoặc  “man -k %s� hay "
+"“info %s�."
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: không thể mở: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"Những câu lệnh này được định nghĩa nội bộ. Gõ lệnh “help� để xem danh sách "
+"này.\n"
+"Gõ “help TÊN� để biết chi tiết v� hàm “TÊN�.\n"
+"Dùng “info bash� để tìm thông tin chung v� hệ v� nói chung.\n"
+"Dùng “man -k� hoặc “info� để tìm thông tin v� lệnh ngoài danh sách này.\n"
+"\n"
+"Dấu sao (*) bên cạnh tên nghĩa là lệnh bị tắt.\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "chỉ có thể dùng một của những tùy ch�n -anrw"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "vị trí lịch sử"
+
+#: builtins/history.def:340
+#, fuzzy, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s: đối số không hợp lệ"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: gặp lỗi khi khai triển lịch sử"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: inlib bị lỗi"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "không cho phép dùng tùy ch�n thêm với “-x�"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: đối số phải là ID tiến trình hoặc công việc"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "Lỗi không rõ"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "cần biểu thức"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: không phải là mảng chỉ số"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: đặc tả bộ mô tả tập tin không hợp lệ"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: bộ mô tả tập tin không hợp lệ: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: sai số lượng dòng"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: gốc mảng không hợp lệ"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: lượng g�i ngược không hợp lệ"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "tên biến mảng vẫn trống"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "cần hỗ trợ biến mảng"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "“%s�: thiếu ký tự định dạng"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "“%c�: đặc tả định dạng th�i gian không đúng"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "“%c�: ký tự định dạng không hợp lệ"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "cảnh báo: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "vấn đ� phân tích cú pháp định dạng: %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "thiếu chữ số thập lục phân cho \\x"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "thiếu chữ số unicode cho \\%c"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "không có thư mục khác"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s: đối số không hợp lệ"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<không có thư mục hiện th�i>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "ngăn xếp thư mục trống"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "chỉ số ngăn xếp thư mục"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"Hiển thị danh sách các thư mục được nhớ hiện th�i. Lệnh “pushd� thêm\n"
+"    thư mục vào danh sách này. “popd� lấy thư mục kh�i danh sách.\n"
+"\n"
+"    Tùy ch�n:\n"
+"      -c\txóa m�i phần tử trong ngăn xếp thư mục\n"
+"      -l\tkhông in phiên bản thư mục có dấu ngã nằm trước\n"
+"        \tmà tương ứng với thư mục chính của ngư�i dùng\n"
+"      -p\tin ngăn xếp thư mục mỗi dòng một mục\n"
+"      -v\tin ngăn xếp thư mục mỗi dòng một mục kèm vị trí trong ngăn xếp\n"
+"\n"
+"    �ối số:\n"
+"      +N\thiển thị mục thứ N đếm từ bên trái khi g�i không tùy ch�n,\n"
+"                bắt đầu từ số không.\n"
+"\n"
+"      -N\thiển thị mục thứ N đếm từ bên phải khi g�i không tùy ch�n,\n"
+"                bắt đầu từ số không."
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Thêm thư mục vào trên ngăn xếp thư mục, hoặc xoay ngăn xếp, làm cho thư mục\n"
+"    hiện th�i nằm ở trên đầu. �ổi vị trí hai thư mục trên cùng nếu\n"
+"    không có đối số.\n"
+"\n"
+"    Tùy ch�n:\n"
+"      -n\tngăn thay đổi thư mục bình thư�ng khi thêm, chỉ thao tác\n"
+"        \ttrên ngăn xếp thư mục.\n"
+"\n"
+"    �ối số:\n"
+"      +N\txoay ngăn xếp để thư mục thứ N (đếm từ bên trái “dirs�, bắt\n"
+"        \tđầu từ số không) nằm ở đầu.\n"
+"\n"
+"      -N\txoay ngăn xếp để thư mục thứ N (đếm từ bên phải “dirs�, bắt\n"
+"        \tđầu từ số không) nằm ở đầu.\n"
+"\n"
+"      THƯ-MỤC\tthêm THƯ-MỤC vào đầu ngăn xếp thư mục và dùng làm thư mục\n"
+"        \tlàm việc hiện th�i.\n"
+"\n"
+"    Lệnh “dirs� hiển thị ngăn xếp thư mục."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"Gỡ b� thư mục kh�i ngăn xếp thư mục. Không đưa ra đối số thì b� thư mục\n"
+"    đầu kh�i ngăn xếp và chuyển đổi sang thư mục đầu mới.\n"
+"\n"
+"    Tùy ch�n:\n"
+"      -n\tngăn thay đổi thư mục bình thư�ng khi thêm, chỉ thao tác\n"
+"\t\ttrên ngăn xếp thư mục.\n"
+"\n"
+"    �ối số:\n"
+"      +N\txoay ngăn xếp để thư mục thứ N (đếm từ bên trái “dirs�. bắt\n"
+"        \tđầu từ số không) nằm ở đầu. Ví dụ “popd +0� b� thư mục\n"
+"                đầu tiên, “popd +1� b� thư mục thứ hai.\n"
+"\n"
+"      -N\txoay ngăn xếp để thư mục thứ N (đếm từ bên phải “dirs�. bắt\n"
+"        \tđầu từ số không) nằm ở đầu. Ví dụ “popd -0� b� thư mục\n"
+"                cuối cùng, “popd -1� b� thư mục kế cuối.\n"
+"\n"
+"    Lệnh “dirs� hiển thị ngăn xếp thư mục."
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: sai đặc tả th�i gian ch� tối đa"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "lỗi đ�c: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr "chỉ có thể “return� từ một hàm hoặc văn lệnh được “source�"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "không thể hủy đặt đồng th�i một hàm VÀ một biến"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: không phải biến mảng"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: không phải hàm"
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr "%s: không thể xuất"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "số lượng dịch"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "không thể đồng th�i đặt và hủy đặt các tùy ch�n hệ v�"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: tên tùy ch�n hệ v� không hợp lệ"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "cần đối số tên tập tin"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: không tìm thấy tập tin"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "không thể ngưng"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "không thể ngưng hệ v� đăng nhập"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s là bí danh của “%s�\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s là từ khóa của hệ v�\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s là một hàm\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s là lệnh tích hợp đặc biệt của hệ v�\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s là lệnh tích hợp hệ v�\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s là %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s được băm (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: đối số giới hạn không hợp lệ"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "“%c�: câu lệnh sai"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s: không thể lấy giới hạn: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "giới hạn"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: không thể sửa đổi giới hạn: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "số bát phân"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "“%c�: toán tử chế độ ký hiệu không hợp lệ"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "“%c�: ký tự chế độ ký hiệu không hợp lệ"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " dòng "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "lệnh cuối: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "Hủy b�…"
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr "THB�O:"
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "lỗi lệnh không rõ"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "kiểu lệnh sai"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "bộ kết nối sai"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "nhảy sai"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: biến chưa liên kết"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\aquá th�i hạn đợi dữ liệu nhập: tự động đăng xuất\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "không thể chuyển hướng đầu vào chuẩn từ /dev/null: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "�ỊNH DẠNG THỜI GIAN: “%c�: ký tự định dạng không hợp lệ"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr ""
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "lỗi ống dẫn"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr "eval: vượt quá mức độ eval lồng nhau tối đa (%d)"
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr "%s: vượt quá mức độ nguồn lồng nhau tối đa (%d)"
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr "%s: vượt quá mức độ các hàm lồng nhau tối đa (%d)"
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: bị hạn chế: không thể dùng “/� trong tên lệnh"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: không tìm thấy lệnh"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: bộ thông dịch sai"
+
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: không thể thực hiện tập tin nhị phân: %s"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "“%s�: là lệnh tích hợp đặc biệt"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "không thể nhân đôi fd %d thành fd %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "vượt quá ngưỡng đệ quy của biểu thức"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "tràn ngược ngăn xếp đệ quy"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "lỗi cú pháp trong biểu thức"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "thử gán cho thứ không phải biến"
+
+#: expr.c:530
+#, fuzzy
+msgid "syntax error in variable assignment"
+msgstr "lỗi cú pháp trong biểu thức"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "chia cho không"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "lỗi: “token expassign� sai"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "cần “:� cho biểu thức đi�u kiện"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "số mũ nh� hơn 0"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "cần định danh sau tăng/giảm dần trước"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "thiếu “)�"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "lỗi cú pháp: cần toán hạng"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "lỗi cú pháp: toán tử số h�c không hợp lệ"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (thẻ bài lỗi là \"%s\")"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "cơ số (toán h�c) không hợp lệ"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: sai số lượng dòng"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "cơ số có giá trị quá lớn"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: lỗi biểu thức\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: không thể truy cập thư mục cấp trên"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "không thể đặt lại chế độ “nodelay� cho fd %d"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr "không thể cấp phát bộ mô tả tập tin mới cho dữ liệu nhập bash từ fd %d"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input: đã có bộ đệm cho fd mới %d"
+
+# Nghĩa chữ ?
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: pgrp pipe"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "pid được tánh nhánh %d có vẻ đang chạy trong công việc %d"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "đang xóa công việc bị dừng chạy %d với nhóm tiến trình %ld"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process: pid %5ld (%s) được đánh dấu vẫn hoạt động"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: không có pid như vậy"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "Tín hiệu %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "Xong"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "Bị dừng"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "Bị dừng(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "�ang chạy"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "Xong(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "Thoát %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "Không rõ trạng thái"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(xuất ra core)"
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (wd: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "setpgid tiến trình con (%ld thành %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: pid %ld không phải là tiến trình con của hệ v� này"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: Không có mục ghi v� tiến trình %ld"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: công việc %d bị dừng chạy"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s: không có công việc như vậy"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: công việc bị chấm dứt"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: công việc %d đã đang chạy n�n"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr "waitchld: đang bật WNOHANG để tránh bị chặn vô hạn"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: dòng %d: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (xuất ra core)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(wd ngay: %s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: getpgrp bị lỗi"
+
+#: jobs.c:4447
+#, fuzzy
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: kỷ luật dòng"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: kỷ luật dòng"
+
+# Nghĩa chữ : dừng dịch
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "không thể đặt nhóm tiến trình cuối cùng (%d)"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "không có đi�u khiển công việc trong hệ v� này"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: khẳng định gặp lỗi: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d: khẳng định bị sai\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "không rõ"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr ""
+"malloc (cấp phát bộ nhớ): khối bộ nhớ dành riêng trên danh sách các khối còn "
+"trống bị ghi vào"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: đã được g�i với đối số khối đã được giải phóng"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: đã được g�i với đối số khối chưa cấp phát"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: phát hiện sự tràn ngược; mh_nbytes ở ngoại phạm vi"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: phát hiện sự tràn ngược; mh_nbytes ở ngoại phạm vi"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: kích cỡ đoạn đầu và cuối không trùng"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: đã được g�i với đối số khối chưa cấp phát"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc: phát hiện sự tràn ngược; mh_nbytes nằm ngoài phạm vi cho phép"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc: phát hiện sự tràn ngược; mh_nbytes nằm ngoài phạm vi cho phép"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: kích cỡ đoạn đầu và cuối không trùng"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: bảng cấp phát đầy với FIND_ALLOC?\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: %p đã có trong bảng như được cấp phát?\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: %p đã có trong bảng như còn trống?\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "cơ số không hợp lệ"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: không rõ máy"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: dịch vụ không hợp lệ"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s: đặc tả đư�ng dẫn mạng sai"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "không hỗ trợ thao tác mạng"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: không thể chuyển đổi mi�n địa phương (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: không thể chuyển đổi mi�n địa phương (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: không thể chuyển đổi mi�n địa phương (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: không thể chuyển đổi mi�n địa phương (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "Bạn có thư trong $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "Bạn có thư mới trong $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "�ã đ�c thư trong %s\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "lỗi cú pháp: cần biểu thức số h�c"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "lỗi cú pháp: gặp dấu chấm phẩy “;� bất thư�ng"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "lỗi cú pháp: “((%s))�"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document: kiểu chỉ lệnh sai %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr "tài liệu này ở dòng %d định giới bằng kết thúc tập tin (muốn “%s�)"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr "make_redirection: chỉ dẫn chuyển hướng “%d� nằm ngoài phạm vi"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr ""
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr "vượt quá số lượng tài-liệu-đây tối đa"
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "gặp kết thúc tập tin bất thư�ng trong khi tìm “%c� tương ứng"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "gặp kết thúc tập tin bất thư�ng trong khi tìm “]]�"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "gặp lỗi cú pháp trong biểu thức đi�u kiện: thẻ bài bất thư�ng “%s�"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "gặp lỗi cú pháp trong biểu thức đi�u kiện"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "gặp thẻ bài bất thư�ng “%s�, cần “)�"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "cần “)�"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "đối số bất thư�ng “%s� cho toán tử một ngôi đi�u kiện"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "đối số bất thư�ng cho toán tử một ngôi đi�u kiện"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "thẻ bài bất thư�ng “%s�, cần toán tử hai ngôi đi�u kiện"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "cần toán tử hai ngôi đi�u kiện"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "đối số bất thư�ng “%s� cho toán tử hai ngôi đi�u kiện"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "đối số bất thư�ng cho toán tử hai ngôi đi�u kiện"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "gặp thẻ bài bất thư�ng “%c� trong câu lệnh đi�u kiện"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "gặp thẻ bài bất thư�ng “%s� trong câu lệnh đi�u kiện"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "gặp thẻ bài bất thư�ng “%d� trong câu lệnh đi�u kiện"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "có lỗi cú pháp ở gần thẻ bài bất thư�ng “%s�"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "lỗi cú pháp ở gần “%s�"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "lỗi cú pháp: kết thúc tập tin bất thư�ng"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "lỗi cú pháp"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Dùng \"%s\" để r�i hệ v�.\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "gặp kết thúc tập tin bất thư�ng trong khi tìm “)� tương ứng"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "tự hoàn thiện: không tìm thấy hàm “%s�"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr ""
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: NULL COMPSPEC"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: bộ kết nối sai “%d�"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: sai bộ mô tả tập tin"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: con tr� tập tin NULL"
+
+# Nghĩa chữ ?
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != fileno xtrace fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: “%c�: ký tự định dạng không hợp lệ"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "bộ mô tả tập tin ở ngoại phạm vi"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: chuyển hướng chưa rõ ràng"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: không thể ghi đè lên tập tin đã có"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: bị hạn chế: không thể chuyển hướng kết xuất"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "không thể tạo tập tin tạm th�i cho tài liệu này: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: không thể gán fd vào biến"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "/dev/(tcp|udp)/host/port không được hỗ trợ nếu không có mạng"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "lỗi chuyển hướng: không thể nhân đôi fd"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "không tìm thấy /tmp, hãy tạo mới!"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "“/tmp� phải là tên thư mục hợp lệ"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr ""
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: tùy ch�n không hợp lệ"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "không thể đặt uid thành %d: uid chịu tác động %d"
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "không thể đặt gid thành %d: gid chịu tác động %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr ""
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr "%s: Là một thư mục"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "Không có tên!"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, phiên bản %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Cách dùng:\t%s [tùy ch�n GNU dài] [tùy ch�n] …\n"
+"\t\t%s [tùy ch�n GNU dài] [tùy ch�n] tập-tin-văn-lệnh …\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "Tùy ch�n dài:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Tùy ch�n:\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-ilrsD hoặc -c lệnh hay -O tùy-ch�n-ngắn\t\t(chỉ g�i)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s hoặc -o tùy-ch�n\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr "Gõ “%s -c \"help set\"� để xem thông tin v� các tùy ch�n hệ v�.\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr "Gõ “%s -c help� để xem thông tin v� các lệnh hệ v� tích hợp.\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr ""
+"Dùng lệnh “bashbug� để thông báo lỗi.\n"
+"Báo cáo các lỗi dịch cho: <http://translationproject.org/team/vi.html>.\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr "Trang chủ bash: <http://www.gnu.org/software/bash/>\n"
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr ""
+"Trợ giúp chung v� cách sử dụng phần m�m GNU : <http://www.gnu.org/gethelp/>\n"
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: thao tác không hợp lệ"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "Tín hiệu giả"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "Treo"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "Ngắt"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "Thoát"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "Câu lệnh không được phép"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "Theo vết/đặt bẫy BPT"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "Câu lệnh HỦY BỎ"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "Câu lệnh EMT"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "Lỗi dấu chấm động"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "Bị giết"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "Lá»—i bus"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "Lỗi phân đoạn"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "Lỗi lệnh g�i hệ thống"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "�ng dẫn h�ng"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "�ồng hồ báo thức"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "Bị chấm dứt"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "�i�u kiện IO gấp"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "Bị dừng (tín hiệu)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "Tiếp tục"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "Tiến trình con đã giết hoặc dừng"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "Bị dừng (tty nhập)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "Bị dừng (tty xuất)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "I/O sẵn sàng"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "Giới hạn CPU"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "Giới hạn tập tin"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "Báo động (ảo)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "Báo động (hồ sơ)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "Cửa sổ bị thay đổi"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "Khóa bản ghi"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "Tín hiệu ngư�i dùng 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "Tín hiệu ngư�i dùng 2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "Dữ liệu nhập HFT bị hoãn"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "sắp bị mất điện đột ngột"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "hệ thống sắp sụp đổ"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "chuyển tiến trình sang CPU khác"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "lỗi lập trình"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "Có chế độ màn hình HFT"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "Không có chế độ màn hình HFT"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "�ã hoàn thành chuỗi âm thanh HFT"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "yêu cầu thông tin"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "Tín hiệu lạ #%d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "sai chỉ số phụ: không có đóng “%s� trong %s"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: không thể gán danh sách cho bộ phận của mảng"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "không thể tạo ống dẫn để thay thế tiến trình"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "không thể tạo tiến trình con để thay thế tiến trình"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "không thể mở ống dẫn đặt tên %s để đ�c"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "không thể mở ống dẫn có tên %s để ghi"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "không thể nhân đôi ống dẫn đặt tên %s thành fd %d"
+
+#: subst.c:6213
+#, fuzzy
+msgid "command substitution: ignored null byte in input"
+msgstr "sai thay thế: không có \"“\" đóng trong %s"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "không thể tạo ống dẫn để thay thế lệnh"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "không thể tạo tiến trình con để thay thế lệnh"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute: không thể nhân đôi ống dẫn thành fd 1"
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: tên biến không hợp lệ cho một tham chiếu tên"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: triển khai gián tiếp không hợp lệ"
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr "“%s�: tên biến không hợp lệ"
+
+#: subst.c:7256
+#, fuzzy, c-format
+msgid "%s: parameter not set"
+msgstr "%s: tham số null hoặc chưa được đặt"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: tham số null hoặc chưa được đặt"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: biểu thức chuỗi con < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: thay thế sai"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: không thể gán bằng cách này"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr ""
+"phiên bản hệ v� mới sẽ ép buộc ước lượng dưới dạng một hàm thay thế số h�c"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "sai thay thế: không có \"“\" đóng trong %s"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "không khớp: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "cần đối số"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: cần biểu thức số nguyên"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "cần “)�"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "cần “)� nhưng lại nhận được %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: cần toán tử hai ngôi"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: cần toán tử một ngôi"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "thiếu “]�"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "lỗi cú pháp: gặp dấu chấm phẩy “;� bất thư�ng"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "số thứ tự tín hiệu không hợp lệ"
+
+#: trap.c:325
+#, fuzzy, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr "eval: vượt quá mức độ eval lồng nhau tối đa (%d)"
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: giá trị sai trong danh sách trap_list[%d]: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+"run_pending_traps: bộ xử lý tín hiệu là SIG_DFL, đang gửi lại %d (%s) cho "
+"chính mình"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: tín hiệu sai %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "gặp lỗi khi nhập vào định nghĩa hàm cho “%s�"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "cấp hệ v� (%d) quá cao nên đặt lại thành 1"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: không có ngữ cảnh hàm ở phạm vi hiện th�i"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: không thể gán giá trị cho biến"
+
+#: variables.c:3475
+#, fuzzy, c-format
+msgid "%s: assigning integer to name reference"
+msgstr "%s: tên biến không hợp lệ cho một tham chiếu tên"
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: không có ngữ cảnh hàm ở phạm vi hiện th�i"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s có exportstr null"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "sai ký tự %d trong exportstr cho %s"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "không có “=� trong exportstr cho %s"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr ""
+"pop_var_context: đầu của shell_variables (các biến hệ v�) không phải là ngữ "
+"cảnh hàm"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr ""
+"pop_var_context: không có ngữ cảnh global_variables (các biến toàn cục)"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr ""
+"pop_scope: đầu của shell_variables (các biến hệ v�) không phải là phạm vi "
+"môi trư�ng tạm th�i"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: không thể mở như là TẬP-TIN"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: sai đặt giá trị cho bộ mô tả tập tin vết"
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s: giá trị so sánh nằm ngoài phạm vi"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "Tác quy�n (C) năm 2014 của Tổ chức Quỹ Phần m�m Tự do, Inc."
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"Giấy phép GPLv3+: GNU GPL phiên bản 3 hoặc mới hơn <http://gnu.org/licenses/"
+"gpl.html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, phiên bản %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr "�ây là phần m�m tự do; bạn có quy�n sửa đổi và phát hành lại nó."
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "Ở đây KHÔNG BẢO HÀNH GÌ CẢ, với đi�u kiện được pháp luật cho phép."
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: không thể cấp phát %lu byte (%lu byte được cấp phát)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: không thể cấp phát %lu byte"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: không thể cấp phát %lu byte (%lu byte được cấp phát)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: không thể cấp phát %lu byte"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [TÊN[=GI�-TRỊ] … ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] TÊN [TÊN …]"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpvsPVSX] [-m SƠ-�Ồ-PH�M] [-f TẬP-TIN] [-q TÊN] [-u TÊN] [-r DÃY-"
+"PH�M] [-x DÃY-PH�M:LỆNH] [DÃY-PH�M:HÀM-READLINE hay LỆNH-READLINE]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [SHELL-BUILTIN [��I-S� …]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [BTHỨC]"
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]]] [-@]] [THƯ-MỤC]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] LỆNH [�.S� …]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilnrtux] [-p] [TÊN[=GI�-TRỊ] …]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilnrtux] [-p] TÊN[=GI�-TRỊ] …"
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [tùy_ch�n] TÊN[=GI�-TRỊ] …"
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [�.S� …]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [�.S� …]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f TẬP-TIN] [TÊN …]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [�.S� …]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts CHUỖI-TÙY-CHỌN TÊN [�.S�]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a TÊN] [LỆNH [��I-S� …]] [CHUYỂN-HƯỚNG …]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr "fc [-e ENAME] [-lnr] [�ẦU] [CU�I] hoặc fc -s [MẪU=LẶP_LẠI] [LỆNH]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [�TCV]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [�TCV …]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p �ƯỜNG-DẪN] [-dt] [TÊN …]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [MẪU …]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d OFFSET] [n] hay history -anrw [T.TIN] hay history -ps �.S� "
+"[�.S�…]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [�TCV …] hoặc jobs -x LỆNH [��I-S�]"
+
+#: builtins.c:131
+#, fuzzy
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [�TCV …]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s �TTH | -n số_tín_hiệu | -�TTH] pid | �TCV … hoặc kill -l [�TTH]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let ��I-S� [��I-S� …]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a MẢNG] [-d GIỚI-HẠN] [-i VĂN-BẢN] [-n S�-K�-TỰ] [-N S�-K�-TỰ] "
+"[-p NHẮC] [-t THỜI-HẠN] [-u fd] [TÊN …]"
+
+# nghĩa chữ
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o TÊN-TÙY-CHỌN] [--] [��I-S� …]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [TÊN …]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [TÊN[=GI�-TRỊ] …] hoặc export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [TÊN[=GI�-TRỊ] …] hay readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source TẬP-TIN [��I-S� …]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". TẬP-TIN [��I-S� …]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [BTHỨC]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ �.S� … ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[�.S�] �TTH …]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] TÊN [TÊN …]"
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [GIỚI-HẠN]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [CHẾ-�Ộ]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-n] [id …]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [pid …]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for TÊN [in TỪ… ;] do C�C;CÂU;LỆNH; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( BTHỨC1; BTHỨC2; BTHỨC3 )); do C�C;CÂU;LỆNH; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select TÊN [in C�C TỪ … ;] do C�C;CÂU;LỆNH; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] �NG-DẪN"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case TỪ in [MẪU [| MẪU]…) C�C;CÂU;LỆNH;;]… esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr ""
+"if LỆNH; then C�C;CÂU;LỆNH; [ elif C�C;CÂU;LỆNH; then C�C;CÂU;LỆNH; ]… "
+"[ else C�C;CÂU;LỆNH; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while C�C;CÂU;LỆNH; do C�C;CÂU;LỆNH; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until C�C;CÂU;LỆNH; do C�C;CÂU;LỆNH; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [TÊN] LỆNH [CHUYỂN-HƯỚNG]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function TÊN { C�C;CÂU;LỆNH; } or TÊN () { C�C;CÂU;LỆNH; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ C�C;CÂU;LỆNH ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "�TCV [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( BTHỨC ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ BTHỨC ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "biến — tên và nghĩa của một số biến hệ v�"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | tmục]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [tên-tùy-ch�n …]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v BIẾN] �ỊNH-DẠNG [C�C-��I-S�]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DE] [-o TÙY-CHỌN] [-A HÀNH-�ỘNG] [-G MẪU-"
+"GLOB] [-W DANH-S�CH-TỪ]  [-F HÀM] [-C LỆNH] [-X MẪU-LỌC] [-P TIỀN-T�] [-S "
+"HẬU-T�] [TÊN …]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o TÙY-CHỌN] [-A HÀNH-�ỘNG] [-G MẪU-GLOB] [-W DANH-"
+"S�CH-TỪ] [-F HÀM] [-C LỆNH] [-X MẪU-LỌC] [-P TIỀN-T�] [-S HẬU-T�] [TỪ]"
+
+#: builtins.c:239
+#, fuzzy
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o TÙY-CHỌN] [-DE] [TÊN …]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-d delim] [-n  S�-LƯỢNG] [-O G�C] [-s S�-LƯỢNG] [-t] [-u fd] [-C "
+"GỌI-NGƯỢC] [-c LƯỢNG] [MẢNG]"
+
+#: builtins.c:244
+#, fuzzy
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-n �ẾM] [-O G�C] [-s S�-LƯỢNG] [-t] [-u FD] [-C GỌI-NGƯỢC] [-c "
+"LƯỢNG] [MẢNG]"
+
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"�ịnh nghĩa hoặc hiển thị bí danh.\n"
+"\n"
+"    Không đưa ra đối số thì “alias� in danh sách các bí danh ở dạng dùng lại "
+"được\n"
+"    “alias TÊN=GI�-TRỊ� trên đầu ra chuẩn.\n"
+"\n"
+"    Nếu không thì một bí danh được định nghĩa cho mỗi TÊN theo giá trị\n"
+"    đưa ra. Khoảng trắng ở đâu trong GI�-TRỊ làm kiểm tra thay thế bí\n"
+"    danh cho từ kế tiếp, khi phân giải bí danh.\n"
+"    \n"
+"    Tùy ch�n:\n"
+"      -p\tin tất cả các bí danh được định nghĩa theo định dạng\n"
+"        \tcó thể dùng lại được\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    alias trả lại thành công trừ khi TÊN đã cho không phải là\n"
+"    một bí danh đã được định nghĩa"
+
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"Gỡ b� TÊN kh�i danh sách các bí danh.\n"
+"    \n"
+"    Tùy ch�n:\n"
+"      -a\tb� tất cả các bí danh.\n"
+"    \n"
+"    Trả lại thành công trừ khi TÊN không phải là một bí danh."
+
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"�ặt các tổ hợp phím và biến Readline.\n"
+"    \n"
+"    Gắn tổ hợp phím với một chức năng hay vĩ lệnh Readline, hoặc\n"
+"    đặt biến Readline. Cú pháp đối số không tùy ch�n giống như trong\n"
+"    ~/.inputrc, nhưng phải được chuyển qua dưới dạng đối số đơn. Ví\n"
+"    dụ: bind “\"\\C-x\\C-r\": re-read-init-file�.\n"
+"    \n"
+"    Tùy ch�n:\n"
+"      -m SƠ-�Ồ-PH�M      dùng sơ_đồ_phím làm sơ đồ phím khi lệnh này\n"
+"                         chạy. Giá trị hợp lệ là emacs, emacs-standard,\n"
+"                         emacs-meta, emacs-ctlx, vi, vi-move, vi-command\n"
+"                         và vi-insert.\n"
+"      -l                 Liệt kê tên các hàm\n"
+"      -P                 Liệt kê tên hàm và tổ hợp phím\n"
+"      -p                 Liệt kê tên hàm và tổ hợp phím theo dạng dùng\n"
+"                          lại làm đầu vào được\n"
+"      -S                 Liệt kê chuỗi phím mà g�i vĩ lệnh và các giá-trị\n"
+"                           của chúng\n"
+"      -s                 Liệt kê chuỗi phím mà g�i vĩ lệnh và các giá-trị\n"
+"                           của chúng theo định dạng có thể dùng làm đầu vào\n"
+"      -V                 Liệt kê các biến và giá trị của chúng\n"
+"      -v                 Liệt kê các biến và giá trị của chúng\n"
+"                          theo định dạng có thể tái sử dụng làm đầu vào.\n"
+"      -q TÊN-HÀM         H�i phím nào g�i hàm này\n"
+"      -u TÊN-HÀM         Gỡ b� tất cả phím tắt gắn với hàm này\n"
+"      -r DÃY-PH�M        Gỡ b� tổ hợp phím này\n"
+"      -f TẬP-TIN         ��c tổ hợp phím từ tập tin này\n"
+"      -x DÃY-PH�M:LỆNH   Chạy LỆNH khi nhập DÃY-PH�M\n"
+"      -X                 Liệt kê dãy phím với tùy-ch�n -x và các lệnh kết "
+"hợp\n"
+"                          theo dạng có thể dùng làm đầu vào.\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    lệnh bind trả v� 0 trừ khi đưa ra tùy ch�n không nhận ra hay gặp lỗi."
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Thoát kh�i vòng lặp for, while hoặc until.\n"
+"\n"
+"    Thoát kh�i vòng lặp for, while hoặc until. Nếu xác định N thì\n"
+"    thoát N vòng lặp.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trạng thái thoát là 0 trừ khi N nh� hơn 1."
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"Tiếp tục lại chạy vòng lặp for, while hoặc until.\n"
+"\n"
+"    Tiếp tục lại chạy vòng lặp for, while hoặc until. Nếu xác định N\n"
+"    thì tiếp tục vòng lặp thứ N.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trạng thái thoát là 0 trừ khi N nh� hơn 1."
+
+#: builtins.c:354
+#, fuzzy
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"Chạy lệnh tích hợp hệ v�.\n"
+"\n"
+"    Chạy SHELL-BUILTIN với ��I-S� mà không thực hiện tìm lệnh. Hữu ích\n"
+"    khi bạn muốn cài đặt lại lệnh hệ v� tích hợp dạng hàm hệ v�, nhưng\n"
+"    cần chạy lệnh tích hợp trong hàm đó.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại trạng thái thoát của SHELL-BUILTIN, hoặc sai nếu\n"
+"    SHELL-BUILTIN không phải là một lệnh tích hợp hệ v�."
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"Trả v� ngữ cảnh của lệnh g�i hàm hiện th�i.\n"
+"\n"
+"    Không có BTHỨC thì trả lại \"$line $filename\".  Có BTHỨC thì trả\n"
+"    lại \"$line $subroutine $filename\"; thông tin bổ sung này có thể\n"
+"    được dùng để cung cấp stack trace.\n"
+"\n"
+"    Giá trị của BTHỨC thì ngụ ý bao nhiêu lần g�i cần lùi lại đằng\n"
+"    trước lệnh g�i hiện tại; khung g�i đầu là khung 0.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại 0 trừ khi hệ v� đang chạy hàm hệ v�, BTHỨC cũng hợp lệ."
+
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"�ổi thư mục làm việc của hệ v�.\n"
+"    \n"
+"    Chuyển đổi thư mục hiện th�i sang THƯ-MỤC. Thư mục mặc định là giá\n"
+"    trị của biến HOME.\n"
+"    \n"
+"    Biến CDPATH định nghĩa đư�ng dẫn tìm kiếm cho thư mục chứa\n"
+"    THƯ-MỤC. Tên thư mục thay thế trong CDPATH được phân cách bằng dấu hai "
+"chấm\n"
+"    (:).  Tên thư mục trống tương đương với thư mục hiện tại. Nếu\n"
+"    THƯ-MỤC bắt đầu với dấu gạch chéo (/) thì không dùng CDPATH.\n"
+"    \n"
+"    Nếu không tìm thấy thư mục, và biến “cdable_vars� được đặt,\n"
+"    thì lệnh sẽ coi là một tên biến. Nếu biến đó có giá trị,\n"
+"    thì giá trị này được dùng cho THƯ-MỤC.\n"
+"    \n"
+"    Tùy ch�n:\n"
+"        -L  buộc theo liên kết m�m: phân giải liên kết m�m\n"
+"           \tTH.MỤC sau khi xử lý “..�\n"
+"        -P  dùng cấu trúc thư mục vật lý mà không theo liên kết m�m:\n"
+"           \tphân giải liên kết m�m TH.MỤC sau khi xử lý “..�\n"
+"        -e  nếu có tùy ch�n -P và không thể xác định thư mục làm việc\n"
+"          \thiện tại thì thoát với trạng thái khác không\n"
+"        -@  trên các hệ thống mà hỗ trợ nó, hiện diện một tập tin với các\n"
+"           thuộc tính mở rộng như là một thư mục chứa các thuộc tính tập "
+"tin\n"
+"    \n"
+"    Mặc định là theo liên kết m�m, như có mặt tùy ch�n “-L�.\n"
+"    “..� được xử lý bằng cách gỡ b� phần trước của đư�ng dẫn\n"
+"    cho đến dấu gạch chéo hay điểm bắt đầu của TH.MỤC.\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Trả v� 0 nếu thay đổi thư mục, và nếu $PWD được đặt thành công khi\n"
+"    -P được sử dụng; không thì khác không."
+
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"In tên thư mục hiện tại.\n"
+"    \n"
+"    Tùy ch�n:\n"
+"      -L  in giá trị của $PWD nếu nó chứa tên của thư mục hiện tại\n"
+"      -P  in thư mục vật lý, không liên kết m�m\n"
+"    \n"
+"    Mặc định “pwd� chạy như có mặt “-L�.\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Trả v� 0 trừ khi đưa ra tùy ch�n sai hoặc không đ�c được thư mục hiện "
+"tại."
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Câu lệnh vô giá trị.\n"
+"    \n"
+"    Không có tác dụng gì: câu lệnh không làm gì cả.\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Lúc nào cũng thành công."
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Trả lại kết quả thành công.\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Lúc nào cũng thành công."
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"Trả v� kết quả không thành công.\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Lúc nào cũng không thành công."
+
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"Thực thi một lệnh đơn giản, hoặc hiển thị thông tin v� lệnh.\n"
+"    \n"
+"    Chạy LỆNH với các ��I-S� mà không thực hiện tra cứu hàm hệ v�,\n"
+"    hoặc hiển thị thông tin v� LỆNH. Có thể được dùng để g�i lệnh trên\n"
+"    đĩa khi đã có hàm cùng tên.\n"
+"    \n"
+"    Tùy ch�n:\n"
+"      -p   dùng giá trị mặc định cho �ƯỜNG_DẪN\n"
+"           mà chắc chắn sẽ tìm m�i tiện ích chuẩn\n"
+"      -v   in mô tả v� LỆNH mà tương tự như lệnh tích hợp “type�\n"
+"      -V   in mô tả chi tiết hơn của mỗi LỆNH\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Trả lại trạng thái thoát của LỆNH, hoặc thất bại nếu không tìm\n"
+"    thấy LỆNH."
+
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"�ặt giá trị và thuộc tính biến.\n"
+"    \n"
+"    Khai báo biến và gán cho thuộc tính cho nó. Nếu không đưa TÊN thì\n"
+"    hiển thị thuộc tính và giá trị của m�i biến.\n"
+"    \n"
+"    Tùy ch�n:\n"
+"      -f\thạn chế hành động hoặc hiển thị tên hàm và định nghĩa\n"
+"      -F\thạn chế hiển thị chỉ tên hàm mà thôi\n"
+"        \t(và số thứ tự dòng và tập tin nguồn khi gỡ lỗi)\n"
+"      -g\ttạo biến toàn cục khi sử dụng trong hàm hệ v�; nếu không\n"
+"        \tthì bị b� qua\n"
+"      -p\thiển thị thuộc tính và giá trị của mỗi TÊN\n"
+"    \n"
+"    Tùy ch�n dùng để đặt thuộc tính:\n"
+"      -a\ttạo mảng chỉ số tên TÊN (nếu hỗ trợ)\n"
+"      -A\ttạo mảng kết hợp tên TÊN (nếu hỗ trợ)\n"
+"      -i\tđặt thuộc tính “integer� (số nguyên) cho TÊN\n"
+"      -l\tchuyển đổi TÊN sang chữ thư�ng khi gán\n"
+"      -n\tlàm một TÊN tham chiếu đến biến có tên là giá trị của nó\n"
+"      -r\tlàm cho TÊN chỉ đ�c\n"
+"      -t\tđặt thuộc tính “trace� cho TÊN\n"
+"      -u\tchuyển đổi TÊN sang chữ hoa khi gán\n"
+"      -x\txuất khẩu TÊN\n"
+"    \n"
+"    Dùng “+� thay cho “-� để tắt thuộc tính đưa ra.\n"
+"    \n"
+"    Biến có thuộc tính số nguyên thì định giá theo số h�c (xem lệnh\n"
+"    “let�  khi biến được gán.\n"
+"    \n"
+"    Khi dùng trong hàm, “declare� đặt TÊN là cục bộ, như khi dùng lệnh\n"
+"    “local� (cục bộ). Tùy ch�n -g ngăn hành vi này.\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công trừ khi đưa ra tùy ch�n sai hoặc gặp lỗi khi gán biến."
+
+#: builtins.c:532
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"�ặt giá trị và thuộc tính của biến.\n"
+"\n"
+"    Lệnh này đã lạc hậu. Xem “help declare�."
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"�ịnh nghĩa biến cục bộ.\n"
+"    \n"
+"    Tạo biến cục bộ tên TÊN và gán GI�-TRỊ cho nó. TÙY_CHỌN có thể là\n"
+"    bất cứ tùy ch�n nào “declare� chấp nhận.\n"
+"    \n"
+"    Biến cục bộ chỉ dùng được bên trong hàm, chỉ truy cập được từ hàm\n"
+"    mà biến được định nghĩa và các hàm con.\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công trừ khi đưa ra tùy ch�n sai hay gặp lỗi,\n"
+"    hoặc nếu hệ v� không chạy hàm."
+
+#: builtins.c:557
+#, fuzzy
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Ghi đối số vào đầu ra tiêu chuẩn.\n"
+"   \n"
+"    Hiển thị các ��I-S�, ngăn cách bằng dấu cách đơn và kèm ký tự dòng mới\n"
+"    ra đầu ra tiêu chuẩn .\n"
+"   \n"
+"    Tùy ch�n:\n"
+"      -n\tđừng thêm ký tự dòng mới\n"
+"      -e\tbật diễn dịch ký tự thoát theo sau ký tự “\\�\n"
+"      -E\tchặn diễn dịch ký tự thoát\n"
+"    \n"
+"    “echo� hiểu những ký tự thoát sau:\n"
+"      \\a\ttiếng chuông\n"
+"      \\b\txóa lùi\n"
+"      \\c\tchặn kết xuất tiếp\n"
+"      \\e\tký tự thoát\n"
+"      \\E\tký tự thoát\n"
+"      \\f\ttải giấy\n"
+"      \\n\tdòng mới\n"
+"      \\r\txuống dòng\n"
+"      \\t\ttab đứng\n"
+"      \\v\ttab ngang\n"
+"      \\\\\tgạch ngược\n"
+"      \\0nnn\tký tự có mã ASCII NNN (1-3 chữ số bát phân)\n"
+"      \\xHH\tký tự 8-bit có giá trị HH (1-2 chữ số thập lục phân)\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công nếu không gặp lỗi khi ghi."
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"Ghi đối số vào đầu ra chuẩn.\n"
+"\n"
+"    Hiển thị ��I-S� trên đầu ra chuẩn, kèm ký tự xuống hàng ở cuối.\n"
+"\n"
+"    Tùy ch�n:\n"
+"      -n\tđừng thêm ký tự xuống hàng\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công nếu không gặp lỗi ghi."
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"Bật và tắt lệnh hệ v� tích hợp.\n"
+"\n"
+"    Bật và tắt các lệnh hệ v� tích hợp. Chức năng tắt cho phép bạn\n"
+"    chạy một lệnh trên đĩa cùng tên với một lệnh hệ v� tích hợp mà\n"
+"    không cần dùng tên đư�ng dẫn đầy đủ.\n"
+"\n"
+"    Tùy ch�n:\n"
+"      -a    in danh sách các lệnh tích hợp kèm trạng thái bật/tắt\n"
+"      -n    tắt TÊN hoặc hiển thị danh sách lệnh bị tắt\n"
+"      -p    in danh sách lệnh tích hợp theo định dạng dùng lại được\n"
+"      -s    chỉ in tên các lệnh tích hợp Posix “đặc biệt�\n"
+"\n"
+"    Tùy ch�n đi�u khiển chức năng tải động:\n"
+"      -f    nạp lệnh tích hợp TÊN từ TẬP-TIN\n"
+"      -d    b� một tích hợp được nạp bằng “-f�\n"
+"\n"
+"    Không có tùy ch�n thì coi như bật TÊN.\n"
+"\n"
+"    �ể sử dụng lệnh “test� trên đĩa (nếu tìm thấy trong $PATH) thay\n"
+"    cho phiên bản hệ v� tích hợp, gõ “enable -n test�.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công trừ khi TÊN không phải lệnh tích hợp hoặc gặp lỗi."
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"Dùng các đối số để chạy lệnh hệ v�.\n"
+"\n"
+"    Gộp các ��I-S� thành một chuỗi đơn, dùng kết quả làm đầu vào cho\n"
+"    hệ v� và chạy lệnh đó.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại trạng thái thoát của câu lệnh hay thành công nếu lệnh rỗng."
+
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"Phân tích đối số tùy ch�n.\n"
+"\n"
+"    Getopts được hệ v� dùng để phân tích tham số thành tùy ch�n.\n"
+"\n"
+"    CHUỖI-TÙY-CHỌN chứa những chữ tùy ch�n cần nhận ra; một chữ có dấu hai\n"
+"    chấm theo sau thì tùy ch�n cần đối số, cách tùy ch�n bằng khoảng\n"
+"    trắng.\n"
+"\n"
+"    Mỗi lần g�i, getopts sẽ đặt tùy ch�n kế tiếp vào biến hệ v� $TÊN,\n"
+"    tạo biến mới nếu tên đó chưa tồn tại, và đặt chỉ số của đối số kế\n"
+"    tiếp cần xử lý vào biến hệ v� OPTIND. OPTIND được khởi động bằng 1\n"
+"    mỗi lần hệ v� hay một văn lệnh hệ v� được g�i. Khi tùy ch�n cần\n"
+"    đối số, getopts đặt đối số đó vào biến hệ v� OPTARG.\n"
+"\n"
+"    getopts thông báo lỗi bằng một trong hai cách. Nếu ký tự đầu tiên\n"
+"    của CHUỖI-TÙY-CHỌN là dấu hai chấm, getopts thông báo lỗi im\n"
+"    lặng. Chế độ này không in ra thông báo nào. Nếu gặp tùy ch�n sai\n"
+"    thì getopts lưu mã ký tự tùy ch�n trong biến OPTARG. Không tìm\n"
+"    thấy đối số cần thiết thì getopts lưu dấu hai chấm trong biến $TÊN\n"
+"    và đặt lưu mã ký tự tùy ch�n trong OPTARG. Nếu getopts không trong\n"
+"    chế độ im lặng và gặp tùy ch�n sai, getopts lưu dấu h�i “?�  vào\n"
+"    biến $TÊN và xóa OPTARG. Không tìm thấy tùy ch�n cần thiết thì “?�\n"
+"    được lưu vào $TÊN, OPTARG bị xlá, và in ra một thông điệp chẩn\n"
+"    đoán.\n"
+"\n"
+"    Nếu biến hệ v� OPTERR có giá trị 0, getopts sẽ không in thông báo\n"
+"    kể cả khi ký tự đầu tiên của CHUỖI-TÙY-CHỌN không phải dấu hai\n"
+"    chấm. OPTERR có giá trị mặc định là 1.\n"
+"\n"
+"    Getopts bình thư�ng phân tích tham số vị trí ($0 - $9). Tuy nhiên,\n"
+"    các đối số bổ sung cũng được phân tích.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công nếu tìm thấy một tùy ch�n; không thành công nếu\n"
+"    gặp kết thúc các tùy ch�n, hoặc nếu gặp lỗi."
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"Thay thế hệ v� bằng câu lệnh đưa ra.\n"
+"    \n"
+"    Thực thi LỆNH, thay thế hệ v� này bằng chương trình được chạy.\n"
+"    ��I-S� trở thành đối số của LỆNH. Không định nghĩa LỆNH thì bất cứ "
+"chuyển\n"
+"    hướng nào sẽ xảy ra trong hệ v� đang chạy.\n"
+"    \n"
+"    Tùy ch�n:\n"
+"      -a TÊN\ttruy�n TÊN cho LỆNH dạng đối số thứ không\n"
+"      -c\tthực thi LỆNH với một môi trư�ng rỗng\n"
+"      -l\tđặt một dấu gạch vào đối số thứ không của LỆNH\n"
+"    \n"
+"    Nếu LỆNH không thể thực thi, hệ v� không tương tác sẽ thoát, trừ\n"
+"    khi đặt tùy ch�n hệ v� “execfail�.\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công trừ khi không tìm được LỆNH hoặc gặp lỗi chuyển hướng."
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"Thoát hệ v�.\n"
+"\n"
+"    Thoát kh�i hệ v� với trạng thái N. Không xác định N thì trạng thái\n"
+"    thoát là trạng thái của lệnh cuối cùng được chạy."
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"Thoát hệ v� đăng nhập.\n"
+"\n"
+"   Thoát kh�i hệ v� đăng nhập với trạng thái N. Trả v� lỗi nếu không\n"
+"   phải hệ v� đăng nhập."
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"Hiển thị hoặc thực thi lệnh từ lịch sử.\n"
+"\n"
+"    fc được dùng để liệt kê, chỉnh sửa và thực thi lại lệnh từ danh\n"
+"    sách lịch sử. �ẦU và CU�I có thể là số xác định phạm vi, hoặc �ẦU\n"
+"    có thể là chuỗi chứa phần đầu lệnh chạy gần đây nhất.\n"
+"\n"
+"    Tùy ch�n:\n"
+"      -e ENAME\tch�n trình soạn thảo nào cần dùng.\n"
+"        \tMặc định là FCEDIT, sau đó là EDITOR, rồi đến vi\n"
+"      -l\tliệt kê thay vì chỉnh sửa\n"
+"      -n\tliệt kê không in số thứ tự dòng\n"
+"      -r\tđảo ngược thứ tự các dòng (mới nhất trước)\n"
+"\n"
+"    �ịnh dạng “fc -s [mẫu=lần_lập_lại …] [lệnh]� được dùng để chạy\n"
+"    lại lệnh sau khi thay thế CŨ=MỚI.\n"
+"\n"
+"    Một bí danh hữu ích là r=\".c -s\" để có thể gõ “r cc� để chạy lệnh\n"
+"    cuối cùng bắt đầu bằng “cc� và gõ “r� để chạy lại lệnh cuối.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công hay trạng thái của câu lệnh được thực thi; gặp\n"
+"    lỗi thì khác số không."
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"Nâng công việc n�n lên trước.\n"
+"\n"
+"    Nâng lên trước công việc được định nghĩa bởi đặc tả công việc �TCV\n"
+"    làm công việc hiện th�i. Không có �TCV thì dùng công việc hiện\n"
+"    th�i của hệ v�.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trạng thái của câu lệnh được nâng lên trước; hoặc thất bại nếu xảy\n"
+"    ra lá»—i."
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Chuyển công việc xuống chạy n�n.\n"
+"\n"
+"    Chuyển công việc định nghĩa theo đặc tả công việc �TCV sang chạy\n"
+"    n�n, như thể lệnh được chạy với “&�. Nếu không có �TCV, dùng công\n"
+"    việc hiện th�i của hệ v�.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công nếu chức năng đi�u khiển công việc được bật và\n"
+"    không gặp lỗi."
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"Nhớ hoặc hiển thị vị trí chương trình.\n"
+"    \n"
+"    Xác định và ghi nhớ tên đư�ng dẫn đầy đủ của mỗi TÊN câu lệnh.\n"
+"    Nếu không đưa ra đối số, hiển thị thông tin v� các câu lệnh được\n"
+"    ghi nhá»›.\n"
+"    \n"
+"    Tùy ch�n:\n"
+"      -d\tquên vị trí đã nhớ của TÊN\n"
+"      -l\thiển thị theo định dạng dùng lại làm đầu vào được\n"
+"      -p\tTÊN_�ƯỜNG_DẪN\tdùng TÊN_�ƯỜNG_DẪN là tên đư�ng dẫn đầy đủ của TÊN\n"
+"      -r\tquên m�i vị trí đã nhớ\n"
+"      -t\tin vị trí đã nhớ của TÊN, in tên trước vị\n"
+"         \t\ttrí nếu TÊN tương ứng với nhi�u vị trí\n"
+"    \n"
+"    �ối số:\n"
+"      TÊN\tmỗi TÊN được tìm trong $PATH và được thêm vào\n"
+"        \t\tdanh sách các câu lệnh được ghi nhớ.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công nếu tìm được TÊN và không đưa ra tùy ch�n sai."
+
+#: builtins.c:818
+#, fuzzy
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"Hiển thị thông tin v� lệnh tích hợp.\n"
+"    \n"
+"    Hiển thị bản tóm tắt ngắn v� các câu lệnh tích hợp.  Nếu chỉ định\n"
+"    MẪU thì in ra trợ giúp chi tiết v� tất cả các câu lệnh tương\n"
+"    ứng với mẫu đó; không thì in ra danh sách các chủ đ� trợ giúp.\n"
+"    \n"
+"    Tùy ch�n:\n"
+"      -d\txuất mô tả ngắn v� mỗi chủ đ�\n"
+"      -m\thiện cách dùng theo định dạng trang hướng dẫn (man)\n"
+"      -s\txuất chỉ một bản tóm tắt cách dùng cho mỗi\n"
+"        \t\tchủ đ� tương ứng với MẪU\n"
+"    \n"
+"    �ối số:\n"
+"      MẪU\tmẫu xác định một chủ đ� trợ giúp\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công nếu tìm được MẪU và không đưa ra tùy ch�n sai."
+
+#: builtins.c:842
+#, fuzzy
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Hiển thị hoặc thao tác danh sách lịch sử.\n"
+"    \n"
+"    Hiển thị danh sách lịch sử kèm số dòng, “*� ở đầu dòng cho các mục\n"
+"    nhập bị sửa đổi. �ối số N thì liệt kê chỉ N mục tin cuối cùng.\n"
+"    \n"
+"    Tùy ch�n:\n"
+"      -c\txóa sạch danh sách lịch sử bằng cách xóa m�i mục tin\n"
+"      -d offset\txóa mục tin lịch sử ở vị trí tương đối này\n"
+"      \n"
+"      -a\tnối đuôi lịch sử từ phiên làm việc này vào tập tin\n"
+"        \tlịch sử.\n"
+"      -n\tđ�c m�i dòng lịch sử chưa đ�c từ tập tin lịch sử\n"
+"      -r\tđ�c tập tin lịch sử và nối thêm vào danh sách lịch sử\n"
+"      -w\tghi lịch sử hiện th�i vào tập tin lịch sử,\n"
+"        \tvào nối đuôi vào danh sách lịch sử\n"
+"      \n"
+"      -p\tkhai triển lịch sử với mỗi ��I-S� và hiển thị kết quả\n"
+"        \tmà không lưu vào danh sách lịch sử\n"
+"      -s\tnối đuôi ��I-S� vào danh sách lịch sử làm một mục đơn\n"
+"    \n"
+"    Nếu có TẬP-TIN thì nó được dùng làm tập tin lịch sử. Ngược\n"
+"    lại, nếu $HISTFILE có giá trị thì dùng; nếu $HISTFILE không có giá\n"
+"    trị thì dùng “~/.bash_history�.\n"
+"    \n"
+"    Nếu biến $HISTTIMEFORMAT đã được đặt và khác rỗng, giá trị đó được\n"
+"    dùng làm chuỗi định dạng cho strftime(3) để in nhãn th�i gian\n"
+"    tương ứng với mỗi mục tin lịch sử được hiển thị. Ngược lại không\n"
+"    in nhãn th�i gian.\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công nếu không gặp tùy ch�n sai hay gặp lỗi."
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"Hiển thị trạng thái của công việc.\n"
+"    \n"
+"    Liệt kê các công việc đang chạy. �ặc tả công việc �TCV hạn chế chỉ\n"
+"    hiện công việc đó thôi. Không có tùy ch�n thì hiển thị trạng thái\n"
+"    của m�i công việc đang chạy.\n"
+"    \n"
+"    Tùy ch�n:\n"
+"      -l\tliệt kê mã số tiến trình ngoài thông tin bình thư�ng\n"
+"      -n\tliệt kê chỉ những tiến trình đã thay đổi trạng thái\n"
+"        \tkể từ lần thông báo cuối cùng\n"
+"      -s\tchỉ hiện những công việc đang dừng chạy\n"
+"    \n"
+"    Nếu có “-x� thì chạy LỆNH sau khi thay thế tất cả đặc tả công việc\n"
+"    trên đối số bằng mã tiến trình của trình dẫn đầu nhóm tiến trình\n"
+"    của công việc đó.\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công nếu không gặp tùy ch�n sai hay gặp lỗi.\n"
+"    �ưa ra “-x� thì trả lại trạng thái thoát của LỆNH."
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"B� công việc kh�i hệ v� đang chạy.\n"
+"    \n"
+"    Gỡ b� công việc xác định bởi đặc tả công việc �TCV ra kh�i bảng các\n"
+"    công việc hoạt động. Không có �TCV thì dùng công việc hiện th�i của hệ "
+"v�.\n"
+"    \n"
+"    Tùy ch�n:\n"
+"      -a\tb� m�i công việc nếu không có �TCV\n"
+"      -h\tđánh dấu �TCV để không gửi tín hiệu SIGHUP\n"
+"        \tcho công việc khi hệ v� nhận được SIGHUP\n"
+"      -r\tchỉ b� những công việc đang chạy\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công nếu không đưa ra tùy ch�n hay �TCV sai."
+
+#: builtins.c:925
+#, fuzzy
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"Gửi tín hiệu cho công việc.\n"
+"    \n"
+"    Gửi tín hiệu xác định bởi SIGSPEC hoặc SIGNUM cho những tiến trình\n"
+"    xác định bởi PID hoặc JOBSPEC. Nếu SIGSPEC và SIGNUM không hiện diện\n"
+"    thì ngầm định SIGTERM.\n"
+"    \n"
+"    Tùy ch�n:\n"
+"      -s TTH\tTTH là tên tín hiệu\n"
+"      -n STH\tSTH là mã số tín hiệu\n"
+"      -l\tliệt kê tên tín hiệu; đối số sau “-l� nếu có được coi\n"
+"        \tlà mã số tín hiệu cần hiện tên\n"
+"    \n"
+"    Kill là lệnh hệ v� tích hợp vì hai lý do: nó cho phép dùng mã số\n"
+"    công việc thay cho mã số tiến trình và cho phép giết tiến trình\n"
+"    đạt giới hạn số các tiến trình được phép tạo.\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công nếu không đưa ra tùy ch�n sai hay gặp lỗi."
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"�ịnh giá biểu thức số h�c.\n"
+"\n"
+"    �ịnh giá mỗi ��I-S� dạng biểu thức số h�c. �ịnh giá theo số nguyên\n"
+"    có giới hạn, không kiểm tra tràn số, mặc dù có bẫy chia cho không\n"
+"    và bật c� lỗi. Danh sách toán tử bên dưới được nhóm theo nhóm độ\n"
+"    ưu tiên ngang hàng. Danh sách theo độ ưu tiên giảm dần.\n"
+"\n"
+"    \tid++, id--\tti�n ti�n/giảm\n"
+"    \t++id, --id\thậu gia/giảm\n"
+"    \t-, +\t\ttrừ, cộng (dấu)\n"
+"    \t!, ~\t\tphủ định lôgíc và trên bit\n"
+"    \t**\t\tsố mũ\n"
+"    \t*, /, %\t\tnhân, chia, số dư\n"
+"    \t+, -\t\tcộng, trừ\n"
+"    \t<<, >>\t\tdịch bit trái/phải\n"
+"    \t<=, >=, <, >\tso sánh\n"
+"    \t==, !=\t\tbằng, không bằng\n"
+"    \t&\t\tphép AND trên bit\n"
+"    \t^\t\tphép XOR trên bit\n"
+"    \t|\t\tphép OR trên bit\n"
+"    \t&&\t\tphép AND lôgíc\n"
+"    \t||\t\tphép OR lôgíc\n"
+"    \tBTHỨC ? BTHỨC : BTHỨC\n"
+"    \t\t\ttoán từ đi�u kiện\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tphép gán\n"
+"\n"
+"    Biến hệ v� có thể dùng làm toán hạng. Tên biến được thay thế bằng\n"
+"    giá trị biến (chuyển thành số nguyên) trong biểu thức. Biến không\n"
+"    cần có thuộc tính số nguyên để dùng làm biểu thức.\n"
+"\n"
+"    Các toán tử được định giá theo thứ tự ưu tiên. Các biểu thức con\n"
+"    nằm trong dấu ngoặc được định giá trước tiên, và có quy�n cao hơn\n"
+"    các quy tắc đi trước bên trên.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Nếu ��I-S� cuối cùng được định giá thành 0 thì trả v� 1; không thì\n"
+"    trả v� 0."
+
+#: builtins.c:994
+#, fuzzy
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"��c một dòng từ đầu vào tiêu chuẩn và tách ra nhi�u trư�ng.\n"
+"    \n"
+"    ��c một dòng từ đầu vào tiêu chuẩn, hoặc từ bộ mô tả tập tin FD nếu\n"
+"    dùng tùy ch�n “-u�. Dòng được chia ra nhi�u trư�ng, trư�ng đầu\n"
+"    tiên được gán cho biến TÊN đầu tiên, từ thứ hai cho TÊN thứ hai,\n"
+"    và cứ như vậy, và từ còn lại nào được gán cho TÊN cuối cùng. Chỉ những "
+"ký\n"
+"    tự trong $IFS được coi là ký tự phân cách.\n"
+"    \n"
+"    Không có TÊN thì dòng được đ�c sẽ lưu vào biến REPLY.\n"
+"    \n"
+"    Tùy ch�n:\n"
+"      -a MẢNG\tlưu các trư�ng vào biến mảng chỉ số MẢNG theo thứ tự,\n"
+"        \tbắt đầu từ không.\n"
+"      -d NGĂN_C�CH\ttiếp tục đến khi đ�c ký tự đầu tiên của DELIM thay\n"
+"    \t\tcho ký tự xuống dòng\n"
+"      -e \tdùng Readline để lấy dòng trong hệ v� tương tác\n"
+"      -i CHUỖI\tdùng CHUỖI làm văn bản đầu tiên cho Readline\n"
+"      -n nChữ\ttrả v� sau khi đ�c đủ số lượng ký tự này thay vì đ�c hết "
+"dòng\n"
+"    \t\tnhưng nếu gặp chuỗi phân tách khi ít hơn Nchữ\n"
+"    \t\tcác ký tự được đ�c trước chuỗi phân tách\n"
+"      -N N\ttrả v� chỉ sau khi đ�c chính xác số lượng ký tự này,\n"
+"        \tnếu không gặp kết thúc tập tin (EOF) hay quá hạn đ�c,\n"
+"        \tcũng b� qua dấu tách nào\n"
+"      -p NHẮC\txuất chuỗi NHẮC mà không có ký tự dòng mới theo sau,\n"
+"        \ttrước khi đ�c\n"
+"      -r\tkhông cho phép gạch chéo ngược để thoát ký tự\n"
+"      -s\tkhông hiện lại dữ liệu nhập đến từ thiết bị cuối\n"
+"      -t\tTHỜI_GIAN_CHỜ\n"
+"        \tth�i gian ch� tối đa và trả v�i không thành công nếu chưa đ�c một\n"
+"        \tdòng dữ liệu nhập hoàn toàn trong số giây này. Giá trị\n"
+"        \tcủa biến TMOUT là th�i hạn mặc định.  Th�i hạn này có\n"
+"        \tthể là một phân số. Nếu THỜI_HẠN là 0 thì việc đ�c trả\n"
+"        \tlại thành công chỉ nếu dữ liệu nhập sẵn sàng trên bộ\n"
+"        \tmô tả tập tin đưa ra. Trạng thái thoát lớn hơn 128\n"
+"        \tnếu vượt quá th�i hạn này.\n"
+"      -u FD\tđ�c từ bộ mô tả tập tin FD thay cho đầu vào tiêu chuẩn\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Mã trả lại là số không, nếu không gặp kết thúc tập tin, hay ch� quá\n"
+"    lâu, hoặc đưa ra bộ mô tả tập tin sai làm đối số cho “-u�."
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"Trở v� từ hàm hệ v�.\n"
+"\n"
+"    Thoát hàm hệ v� hoặc văn lệnh được “source� với mã trả v� xác định\n"
+"    bởi N. Nếu không có N, trạng thái thoát là của lệnh thực hiện cuối\n"
+"    cùng trong hàm/văn lệnh.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại N, hoặc bị lỗi nếu hệ v� không đang chạy một hàm hay văn\n"
+"    lệnh."
+
+#: builtins.c:1054
+#, fuzzy
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"�ặt hay hủy giá trị của tùy ch�n hệ v� và tham số vị trí.\n"
+"    \n"
+"    Sửa đổi giá trị của thuộc tính hệ v� và tham số vị trí,\n"
+"    hoặc hiển thị tên và giá trị của biến hệ v�.\n"
+"    \n"
+"    Tùy ch�n:\n"
+"      -a  �ánh dấu các biến được tạo hay sửa đổi để xuất ra\n"
+"      -b  Thông báo ngay v� công việc bị chấm dứt\n"
+"      -e  Thoát ngay nếu câu lệnh thoát với trạng thái khác số không\n"
+"      -f  Tắt chức năng tạo tên tập tin (glob)\n"
+"      -h  Nhớ vị trí của mỗi câu lệnh khi nó được dò tìm\n"
+"      -k  M�i đối số gán được đặt vào môi trư�ng cho một câu lệnh,\n"
+"           không phải chỉ những đối số nằm trước tên câu lệnh\n"
+"      -m  Bật chức năng đi�u khiển công việc\n"
+"      -n  ��c câu lệnh mà không thực thi\n"
+"      -o TÊN_TÙY_CHỌN\n"
+"          �ặt biến tương ứng với TÊN_TÙY_CHỌN:\n"
+"                    allexport       giống -a\n"
+"                    braceexpand     giống -B\n"
+"                    emacs           dùng giao diện soạn thảo kiểu emacs\n"
+"                    errexit         giống -e\n"
+"                    errtrace        giống -E\n"
+"                    functrace       giống -T\n"
+"                    hashall         giống -h\n"
+"                    histexpand      giống -H\n"
+"                    history         bật lịch sử câu lệnh\n"
+"                    ignoreeof       hệ v� không thoát khi đ�c EOF\n"
+"                    interactive-comments\n"
+"                                    cho phép ghi chú trong lệnh tương tác\n"
+"                    keyword         giống -k\n"
+"                    monitor         giống -m\n"
+"                    noclobber       giống -C\n"
+"                    noexec          giống -n\n"
+"                    noglob          giống -f\n"
+"                    nolog           hiện th�i chấp nhận nhưng b� qua\n"
+"                    notify          giống -b\n"
+"                    nounset         giống -u\n"
+"                    onecmd          giống -t\n"
+"                    physical        giống -P\n"
+"                    pipefail        giá trị trả lại của ống dẫn là\n"
+"                                    trạng thái của câu lệnh cuối cùng\n"
+"                                    có trạng thái khác không, hoặc số\n"
+"                                    không nếu không có câu lệnh thoát\n"
+"                                    với trạng thái khác không\n"
+"                    posix           thay đổi những thao tác khác với\n"
+"                                    Posix thành tuân theo Posix\n"
+"                    privileged      giống -p\n"
+"                    verbose         giống -v\n"
+"                    vi              dùng giao diện soạn thảo kiểu vi\n"
+"                    xrace           giống -x\n"
+"        -p      Bật khi nào mã số thật và mã số có kết quả\n"
+"                không tương ứng với nhau.\n"
+"                Tắt tính năng xử lý tập tin $ENV\n"
+"                và nhập các hàm vào hệ v�.\n"
+"                Việc tắt tùy ch�n này thì gây ra uid và gid có kết quả\n"
+"                được đặt thành uid và gid thật.\n"
+"        -t      Thoát sau khi đ�c và thực thi một câu lệnh\n"
+"        -u      Xử lý biến chưa đặt là lỗi khi thay thế\n"
+"        -v      In ra mỗi dòng nhập vào hệ v� khi nó được đ�c\n"
+"        -x      On ra mỗi câu lệnh và đối số tương ứng khi nó được thực thi\n"
+"        -B      hệ v� sẽ mở rộng các dấu ngoặc móc\n"
+"        -C      Nếu đặt thì không cho phép ghi đè lên tập tin bình thư�ng\n"
+"                đã tồn tại bằng cách chuyển hướng kết xuất\n"
+"        -E      Nếu đặt thì bẫy ERR được chức năng hệ v� kế thừa\n"
+"        -H       Bật! bật chức năng thay thế kiểu. C� này được bật\n"
+"                theo mặc định khi hệ v� tương tác\n"
+"        -P      �ặt thì không theo liên kết m�m\n"
+"                khi thực thi câu lệnh như cd mà chuyển đổi thư mục hiện tại\n"
+"        -T      Nếu đặt thì bẫy DEBUG (gỡ lỗi) được các hàm của hệ v� kế "
+"thừa\n"
+"        --      Gán bất cứ đối số còn lại nào cho những tham số thuộc vị "
+"trí.\n"
+"                Nếu không còn thừa lại đối số nào, tham số vị trí\n"
+"                ìm kiếm được đặt.\n"
+"        -       Gán bất cứ đối số còn lại nào cho những tham số thuộc vị "
+"trí.\n"
+"                Hai tùy ch�n -x và -v đ�u bị tắt.\n"
+"    \n"
+"    Việc dùng + thay - làm tắt c�. Các c� cũng có thể được dùng khi\n"
+"    g�i hệ v�. Giá trị các c� hiện hành có thể tìm thấy trong biến\n"
+"    $-. Các đối số còn lại là tham số thuộc vị trí, và được gán (theo\n"
+"    thứ tự) cho $1, $2, .. $n.  Không đưa ra đối số thì in ra m�i biến\n"
+"    shell.\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công trừ phi gặp tùy ch�n sai."
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"Xóa giá trị và thuộc tính của biến hệ v� và các hàm.\n"
+"    \n"
+"    �ối với mỗi TÊN, gỡ b� biến hay hàm tương ứng.\n"
+"    \n"
+"    Tùy ch�n:\n"
+"      -f\tcoi mỗi TÊN là hàm hệ v�\n"
+"      -v\tcoi mỗi TÊN là biến hệ v�\n"
+"      -n\tcoi TÊN như là tên tham chiếu và b� đặt biến đó thay vì\n"
+"         biến mà nó tham chiếu đến\n"
+"    \n"
+"    Không có tùy ch�n thì sẽ thử xóa biến, và nếu không thành công,\n"
+"    sau đó thử xóa hàm.\n"
+"    \n"
+"    Một số biến không thể gỡ b�; nên xem “readonly�.\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công nếu không đưa ra tùy ch�n sai hay TÊN chỉ-đ�c."
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"�ặt thuộc tính xuất khẩu cho biến hệ v�.\n"
+"\n"
+"    �ánh dấu TÊN để tự động xuất vào môi trư�ng của các lệnh được chạy\n"
+"    sau đó. Có GI�-TRỊ thì gán GI�-TRỊ trước khi xuất ra.\n"
+"\n"
+"    Tùy ch�n:\n"
+"      -f\ttham chiếu đến hàm hệ v�\n"
+"      -n\tgỡ b� thuộc tính xuất khẩu kh�i TÊN\n"
+"      -p\thiển thị danh sách các biến và hàm được xuất ra\n"
+"\n"
+"    �ối số “--� ngừng phân tích tùy ch�n cho các tham số còn lại.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công nếu không đưa ra tùy ch�n hay TÊN sai,"
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"�ánh dấu biến hệ v� là không thể thay đổi.\n"
+"    \n"
+"    �ánh dấu TÊN là chỉ đ�c; giá trị những TÊN này không được thay\n"
+"    đổi trong các phép gán sau. Nếu có GI�-TRỊ thì gán GI�-TRỊ trước\n"
+"    khi đánh dấu là chỉ đ�c.\n"
+"    \n"
+"    Tùy ch�n:\n"
+"      -a\ttham chiếu đến biến kiểu mảng chỉ số\n"
+"      -A\ttham chiếu đến biến kiểu mảng kết hợp\n"
+"      -f\ttham chiếu đến hàm hệ v�\n"
+"      -p\thiển thị danh sách biến và hàm chỉ đ�c, tùy thuộc vào\n"
+"         \t\tcó tùy ch�n -f hay không\n"
+"    \n"
+"    �ối số “--� ngừng phân tích tùy ch�n cho các tham số còn lại.\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công nếu không đưa ra tùy ch�n sai hay TÊN không hợp lệ."
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"Dịch vị trí đối số.\n"
+"\n"
+"    Thay đổi tên của đối số vị trí $N+1,$N+2 … thành $1,$2 …\n"
+"    N là 1 nếu không chỉ định.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công trừ khi N âm hay lớn hơn $#."
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"Thực thi lệnh từ tập tin trong hệ v� hiện tại.\n"
+"\n"
+"    ��c và thực thi lệnh từ TẬP-TIN trong hệ v� đang chạy. $PATH được\n"
+"    dùng để tìm thư mục chứa tập tin này. Nếu có đối số thì mỗi đối số\n"
+"    trở thành tham số vị trí khi TẬP-TIN được thực thi.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại trạng thái của câu lệnh cuối cùng được thực thi trong\n"
+"    TẬP-TIN; không thành công nếu không thể đ�c TẬP-TIN."
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"Ngưng chạy hệ v�.\n"
+"\n"
+"    Ngưng chạy hệ v� này đến khi nhận tín hiệu SIGCONT. Nếu không ép\n"
+"    buộc thì không thể ngưng chạy hệ v� đăng nhập.\n"
+"\n"
+"    Tùy ch�n:\n"
+"    \t-f\tbuộc ngưng, thậm chí với hệ v� đăng nhập\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công trừ khi chức năng đi�u khiển công việc không\n"
+"    được bật hoặc gặp lỗi."
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"�ịnh giá biểu thức đi�u kiện.\n"
+"    \n"
+"    Thoát với trạng thái 0 (đúng) hoặc 1 (sai), tùy kết quả định giá\n"
+"    BTHỨC. Biểu thức có thể kiểu một ngôi hoặc hai ngôi. Biểu thức\n"
+"    một ngôi thư�ng dùng để kiểm tra trạng thái tập tin. Ngoài ra còn\n"
+"    có toán tử chuỗi và so sánh số.\n"
+"    \n"
+"    Hành vi của lệnh test phụ thuộc vào số đối số. ��c sổ tay hướng dẫn của\n"
+"    bash để có mô tả đầy đủ.\n"
+"    \n"
+"    Toán tử tập tin:\n"
+"    \n"
+"      -a TẬP-TIN       �úng nếu tập tin tồn tại.\n"
+"      -b TẬP-TIN       �úng nếu tập tin là biệt khối.\n"
+"      -c TẬP-TIN       �úng nếu tập tin là đặc biệt ký tự.\n"
+"      -d TẬP-TIN       �úng nếu tập tin là thư mục.\n"
+"      -e TẬP-TIN       �úng nếu tập tin tồn tại.\n"
+"      -f TẬP-TIN       �úng nếu tập tin tồn tại và là tập tin thư�ng\n"
+"      -g TẬP-TIN       �úng nếu tập tin là set-group-id.\n"
+"      -h TẬP-TIN       �úng nếu tập tin là liên kết m�m.\n"
+"      -L TẬP-TIN       �úng nếu tập tin là liên kết m�m.\n"
+"      -k TẬP-TIN       �úng nếu tập tin có bit “sticky�.\n"
+"      -p TẬP-TIN       �úng nếu tập tin là ống dẫn có tên.\n"
+"      -r TẬP-TIN       �úng nếu tập tin bạn đ�c được.\n"
+"      -s TẬP-TIN       �úng nếu tập tin tồn tại và không rỗng.\n"
+"      -S TẬP-TIN       �úng nếu tập tin là socket.\n"
+"      -t FD            �úng nếu FD được mở trên thiết bị cuối.\n"
+"      -u TẬP-TIN       �úng nếu tập tin là set-user-id.\n"
+"      -w TẬP-TIN       �úng nếu tập tin ghi được (bởi bạn).\n"
+"      -x TẬP-TIN       �úng nếu tập tin chạy được (bởi bạn).\n"
+"      -O TẬP-TIN       �úng nếu tập tin thực tế được bạn sở hữu.\n"
+"      -G TẬP-TIN       �úng nếu tập tin thực tế được nhóm của bạn sở hữu.\n"
+"      -N TẬP-TIN       �úng nếu tập tin đã bị sửa đổi từ lần đ�c cuối.\n"
+"    \n"
+"      TẬP-TIN1 -nt TẬP-TIN2\n"
+"                       �úng nếu tập tin 1 mới hơn tập tin 2 (dựa theo\n"
+"                       ngày sửa đổi)\n"
+"    \n"
+"      TẬP-TIN1 -ot TẬP-TIN2\n"
+"                       �úng nếu tập tin 1 cũ hơn tập tin 2.\n"
+"    \n"
+"      TẬP-TIN1 -ef TẬP-TIN2\n"
+"                       �úng nếu tập tin 1 là liên kết cứng tới tập tin 2.\n"
+"    \n"
+"    Toán tử chuỗi:\n"
+"    \n"
+"      -z CHUỖI         �úng nếu chuỗi rỗng.\n"
+"    \n"
+"      -n CHUá»–I\n"
+"      CHUỖI            �úng nếu chuỗi khác rỗng.\n"
+"    \n"
+"      CHUỖI1 = CHUỖI2  �úng nếu hai chuỗi bằng nhau.\n"
+"      CHUỖI1 != CHUỖI2 �úng nếu hai chuỗi khác nhau.\n"
+"      CHUỖI1 < CHUỖI2  �úng nếu CHUỖI1 xếp trước CHUỖI2 theo thứ tự từ "
+"điển.\n"
+"      CHUỖI1 > CHUỖI2  �úng nếu CHUỖI1 xếp sau CHUỖI2 theo thứ tự từ điển.\n"
+"    \n"
+"    Toán tử khác:\n"
+"    \n"
+"      -o TÙY_CHỌN      �úng nếu tùy ch�n hệ v� này được bật.\n"
+"      -v BIẾN          �úng nếu BIẾN hệ v� này được đặt\n"
+"      -R BIẾN          �úng nếu BIẾN hệ v� này được đặt là tham chiếu tên.\n"
+"      ! BTHỨC          �úng nếu biểu thức này không đúng.\n"
+"      BTHỨC1 -a BTHỨC2  �úng nếu cả hai biểu thức là đúng.\n"
+"      BTHỨC1 -o BTHỨC2  �úng nếu một hoặc hai biểu thức đúng.\n"
+"    \n"
+"      ��I-S�1 OP ��I-S�2\n"
+"                       Phép thử số h�c. OP (toán tử) là một trong -eq, -ne,\n"
+"                       -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Phép toán số h�c hai ngôi trả v� đúng nếu ��I-S�1 bằng, khác, nh�\n"
+"    hơn, nh� hơn hoặc bằng, lớn hơn, lớn hơn hoặc bằng ��I-S�2.\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công nếu BTHỨC định giá là �úng; không thành công\n"
+"    nếu BTHỨC định giá thành Sai hay đối số được chỉ ra sai."
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"�ịnh giá biểu thức đi�u kiện.\n"
+"    \n"
+"    Lệnh này cùng chức năng lệnh tích hợp \"test\", nhưng đối số cuối\n"
+"    cùng phải là ký tự “]� để khớp với “[� ở đầu."
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"Hiển thị th�i lượng chạy tiến trình.\n"
+"\n"
+"    In th�i lượng chạy ở mức ngư�i dùng và hệ thống của hệ v� và các\n"
+"    tiến trình con.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Lúc nào cũng thành công."
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"Bẫy tín hiệu và sự kiện khác.\n"
+"\n"
+"    �ịnh nghĩa và kích hoạt các bộ xử lý khi hệ v� nhận được tín hiệu\n"
+"    hay các đi�u kiện khác.\n"
+"\n"
+"    ��I-S� là một lệnh cần đ�c và thực thi khi hệ v� nhận được tín\n"
+"    hiệu theo đặc tả tín hiệu �TTH. Nếu không có ��I-S� (và chỉ cung\n"
+"    cấp một �TTH), hoặc cung cấp “-�. mỗi tín hiệu được xác định thì\n"
+"    được đặt lại v� giá trị gốc. Nếu ��I-S� là chuỗi rỗng thì mỗi �TTH\n"
+"    bị hệ v� và những lệnh bên trong b� qua.\n"
+"\n"
+"    Nếu �TTH là EXIT (0) thì ��I-S� được thực thi khi thoát\n"
+"    kh�i hệ v�. Nếu là DEBUG, ��I-S� được thực thi trước mỗi lệnh đơn\n"
+"    giản. Nếu là RETURN, ��I-S� được thực thi mỗi khi hàm hệ v� hay\n"
+"    một văn lệnh, được chạy bởi lệnh “.� hoặc “source�. kết thúc thực\n"
+"    thi. �TTH ERR nghĩa là thực thi ��I-S� mỗi khi lệnh gặp\n"
+"    lỗi dẫn đến thoát hệ v� khi bật tùy ch�n -e.\n"
+"    \n"
+"    Nếu không có đối số, “trap� sẽ in danh sách của các lệnh gắn với\n"
+"    các tín hiệu.\n"
+"    \n"
+"    Tùy ch�n:\n"
+"      -l\tin danh sách tên tín hiệu và mã số tương ứng\n"
+"      -p\thiển thị lệnh bắt tương ứng với mỗi �TTH\n"
+"\n"
+"    Mỗi �TTH hoặc là tên tín hiệu trong <signal.h>, hoặc mã\n"
+"    số tín hiệu. Tên tín hiệu không phân biệt chữ hoa/thư�ng, và không\n"
+"    bắt buộc phải dùng ti�n tố SIG. Có thể gửi tín hiệu cho hệ v� bằng\n"
+"    \"kill -signal $$\".\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công trừ phi đưa ra �TTH sai hay tùy ch�n\n"
+"    sai."
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"Hiển thị thông tin v� kiểu câu lệnh.\n"
+"    \n"
+"    �ối với mỗi TÊN, chỉ ra cách thông dịch lệnh khi được thực thi\n"
+"    theo tên lệnh.\n"
+"    \n"
+"    Tùy ch�n:\n"
+"      -a\thiển thị m�i vị trí chứa tập tin thực thi được có TÊN;\n"
+"        \tkhông đặt tùy ch�n “-p� thì bao gồm các bí danh, lệnh\n"
+"        \ttích hợp và hàm.\n"
+"      -f\tngăn tra cứu hàm hệ v�\n"
+"      -P\tbuộc tìm kiếm PATH đối với mỗi TÊN, thậm chí nếu nó là\n"
+"        \tbí danh, lệnh tích hợp hay hàm, và trả lại tên của tập\n"
+"        \ttin trên đĩa mà sẽ được thực thi\n"
+"      -p\ttrả v� hoặc tên của tập tin trên đĩa mà sẽ được thực\n"
+"    \t\tthi, hoặc gì cả “type -t TÊN� sẽ không trả v� “file�\n"
+"    \t\t(tập tin).\n"
+"      -t\txuất một trong những từ đơn “alias�, “keyword�, “function�,\n"
+"        \t“builtin�, “file� hoặc “�, nếu TÊN tương ứng là bí danh,\n"
+"        \ttừ khóa,hàm, lệnh hệ v� tích hợp, tập tin\n"
+"        \ttrên đĩa, hoặc không tìm thấy.\n"
+"    \n"
+"    �ối số:\n"
+"      TÊN\ttên câu lệnh cần giải thích.\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công nếu tìm thấy tất cả các TÊN; bị lỗi nếu không tìm "
+"thấy."
+
+#: builtins.c:1431
+#, fuzzy
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Sửa đổi giới hạn tài nguyên hệ v�.\n"
+"    \n"
+"    �i�u khiển tài nguyên sẵn có của hệ v� và các tiến trình nó tạo ra,\n"
+"    trên hệ thống hỗ trợ điểu khiển tài nguyên như vậy.\n"
+"    \n"
+"    Tùy ch�n:\n"
+"      -S\tdùng giới hạn tài nguyên “soft� (m�m)\n"
+"      -H\tdùng giới hạn tài nguyên “hard� (cứng)\n"
+"      -a\tthông báo m�i giới hạn hiện th�i\n"
+"      -b\tkích cỡ của vùng đệm socket\n"
+"      -c\tkích cỡ tối đa của tập tin core được tạo\n"
+"      -d\tkích cỡ tối đa của từng đoạn dữ liệu của một tiến trình\n"
+"      -e\tmức ưu tiên lập lịch cao nhất (“nice�)\n"
+"      -f\tkích cỡ tập tin tối đa được ghi bởi hệ v� và tiến trình con\n"
+"      -i\tsố tín hiệu bị hoãn tối đa\n"
+"      -k\tsố lượng kqueues được phân bổ tối đa cho tiến trình này\n"
+"      -l\tkích cỡ tối đa mà tiến trình có thể khóa vào bộ nhớ\n"
+"      -m\tkích cỡ tập nội trú (RSS) tối đa\n"
+"      -n\tsố bộ mô tả tập tin tối đa được mở\n"
+"      -p\tkích thước vùng đệm ống dẫn\n"
+"      -q\tsố byte tối đa trong hàng đợi thông điệp POSIX\n"
+"      -r\tmức ưu lập lịch th�i gian thực cao nhất\n"
+"      -s\tkích thước ngăn xếp tối đa\n"
+"      -t\tlượng th�i gian cpu tối đa theo giây\n"
+"      -u\tsố tiến trình ngư�i dùng tối đa\n"
+"      -v\tkích cỡ của bộ nhớ ảo\n"
+"      -x\tsố khóa tập tin tối đa\n"
+"      -P\tsố lượng thiết bị cuối ảo tối đa\n"
+"      -T\tsố lượng tuyến trình tối đa\n"
+"    \n"
+"    Không phải tất cả các tùy-ch�n này đ�u sẵn sàng trên m�i n�n tảng.\n"
+"    \n"
+"    Nếu có GIỚI_HẠN thì nó là giá trị mới của tài nguyên được ghi. Ba\n"
+"    giá trị GIỚI_HẠN đặc biệt “soft�, “hard� và “unlimited� tương ứng\n"
+"    là giới hạn m�m hiện tại, giới hạn cứng hiện tại và không giới\n"
+"    hạn. Không có thì in giá trị hiện th�i của tài nguyên được ghi.\n"
+"    Ngầm định “-f� nếu không chỉ định tùy ch�n.\n"
+"    \n"
+"    Giá trị tính theo khối 1024 byte, trừ -t tính theo giây, -p theo\n"
+"    khối 512 byte và -u theo số tiến trình.\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công nếu không đưa ra tùy ch�n sai hay có lỗi phát sinh."
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"Hiển thị hoặc đặt mặt nạ chế độ tập tin.\n"
+"\n"
+"    �ặt mặt nạ tạo tập tin của ngư�i dùng thành CHẾ_�Ộ. Không tham số\n"
+"    thì in chế độ hiện th�i.\n"
+"\n"
+"    Nếu CHẾ_�Ộ bắt đầu bằng chữ số thì hiểu là số bát phân; không thì\n"
+"    nó là chuỗi chế độ ký hiệu được chmod(1) chấp nhận.\n"
+"\n"
+"    Tùy ch�n:\n"
+"      -p\tkhông có CHẾ_�Ộ thì xuất theo định dạng dùng lại\n"
+"        \tlàm dữ liệu đầu vào\n"
+"      -S\tin kết xuất ký hiệu thay vì bát phân\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công nếu không có CHẾ_�Ộ sai hay tùy ch�n sai."
+
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"Ch� công việc chạy xong và trả v� trạng thái thoát.\n"
+"\n"
+"    �ợi tiến trình xác định bởi ID, có thể là mã số tiến trình hay đặc\n"
+"    tả công việc, sau đó trả v� trạng thái kết thúc của nó. Không có\n"
+"    ID thì đợi tất cả các tiến trình con đang chạy và trạng thái trả\n"
+"    v� là không. Nếu ID là đặc tả công việc thì đợi tất cả các tiến\n"
+"    trình vẫn nằm trong ống dẫn của công việc đó.\n"
+"    \n"
+"    Nếu tùy-ch�n -n được áp dùng thì đợi cho đến khi công việc kế chấm dứt "
+"và\n"
+"    trả v� trạng thái thoát của nó.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả v� trạng thái của ID cuối; không thành công nếu ID sai hoặc đưa\n"
+"    ra tùy ch�n sai."
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"�ợi tiến trình chạy xong và trả v� trạng thái thoát.\n"
+"\n"
+"    �ợi từng tiến trình đã chỉ ra theo PID và báo cáo trạng thái kết thúc\n"
+"    của nó. Nếu không chỉ ra PID thì đợi tất cả các tiến trình con đang\n"
+"    chạy, và mã v� là không. PID phải là mã số tiến trình.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại trạng thái của PID; không thành công nếu PID sai, hoặc nếu\n"
+"    đưa ra tùy ch�n sai."
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Thực thi lệnh cho từng phần tử nằm trong danh sách.\n"
+"\n"
+"    Vòng lặp “for� thực thi lệnh cho từng phần tử nằm trong danh sách. "
+"Không\n"
+"    ghi “in TỪ …� thì ngầm định “in \"$@\"�. �ối với mỗi phần tử trong\n"
+"    danh sách, đặt giá trị phần tử đó cho biến TÊN rồi thực thi C�C;CÂU;"
+"LỆNH.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại trạng thái của câu lệnh cuối cùng được chạy."
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Số h�c cho vòng lặp.\n"
+"\n"
+"    TÆ°Æ¡ng Ä‘Æ°Æ¡ng vá»›i:\n"
+"    \t(( BTHỨC1 ))\n"
+"    \twhile (( BTHỨC2 )); do\n"
+"    \t\tC�C;CÂU;LỆNH;\n"
+"    \t\t(( BTHỨC3 ))\n"
+"    \tdone\n"
+"    BTHỨC1, BTHỨC2 và BTHỨC3 là biểu thức số h�c. Ngầm định 1 cho bất\n"
+"    kì biểu thức b� trống nào.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại trạng thái của câu lệnh cuối cùng được chạy."
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Ch�n từ từ một danh sách và thực thi lệnh.\n"
+"\n"
+"    TỪ được triển khai, phát sinh danh sách từ. Tập hợp các từ kết quả được\n"
+"    in ra đầu ra lỗi chuẩn với một con số ở phía trước. Ngầm định “in\n"
+"    \"$@\"� nếu không có “in TỪ�. Dấu nhắc PS3 được hiển thị và một dòng\n"
+"    được đ�c từ đầu vào tiêu chuẩn. Nếu dòng bao gồm số tương ứng với từ\n"
+"    hiển thị thì đặt từ đó vào biến TÊN. Nếu dòng rỗng thì hiển thị\n"
+"    lại TỪ và dấu nhắc. Nếu gặp EOF thì kết thúc. �ặt TÊN là rỗng với\n"
+"    các giá trị khác. Dòng đ�c được lưu vào biến REPLY. LỆNH được thực\n"
+"    thi sau mỗi lần ch�n đến khi gặp lệnh “break�.\n"
+"\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại trạng thái của câu lệnh cuối cùng được chạy."
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"Thông báo th�i gian sử dụng để thực thi ống dẫn.\n"
+"\n"
+"    Thực thi �NG-DẪN và in tóm tắt th�i gian thật, th�i gian CPU ngư�i\n"
+"    dùng, và th�i gian CPU hệ thống được dùng để thực thi ống dẫn đến\n"
+"    khi chấm dứt.\n"
+"\n"
+"    Tùy ch�n:\n"
+"      -p\tin bản tóm tắt th�i gian theo định dạng POSIX\n"
+"\n"
+"    Giá trị biến TIMEFORMAT được dùng làm định dạng kết xuất.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trạng thái trả v� là trạng thái trả v� của �NG-DẪN."
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Thực thi lệnh ch�n theo mẫu.\n"
+"\n"
+"    Thực thi LỆNH một cách ch�n dựa vào TỪ tương ứng với MẪU. Nhi�u\n"
+"    mẫu cách nhau bằng “|�.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại trạng thái của câu lệnh cuối cùng được chạy."
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Thực thi câu lệnh có đi�u kiện.\n"
+"\n"
+"    Danh sách “if C�C;CÂU;LỆNH� được thực thi. Nếu trạng thái thoát là "
+"không,\n"
+"    thì thực thi danh sách “then LỆNH�. Không thì thực thi lần lượt\n"
+"    mỗi danh sách “elif LỆNH�. và nếu trạng thái thoát là không, thì\n"
+"    thực thi danh sách “then LỆNH� tương ứng và hoàn tất lệnh\n"
+"    “if�. Không thì thực thi danh sách “else LỆNH� nếu có. Trạng thái\n"
+"    thoát của toàn bộ lệnh “if� là trạng thái của lệnh cuối cùng được\n"
+"    chạy, hoặc không nếu không có đi�u kiện nào trả v� kết quả là\n"
+"    đúng.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại trạng thái của câu lệnh cuối cùng được chạy."
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Thực thi lệnh chừng nào phép thử còn thành công.\n"
+"\n"
+"    Khai triển và thực thi C�C;CÂU;LỆNH chừng nào lệnh cuối cùng trong "
+"“while� LỆNH\n"
+"    có trạng thái thoát là không.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại trạng thái của câu lệnh cuối cùng được chạy."
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Thực thi lệnh chừng nào phép thử vẫn không thành công.\n"
+"\n"
+"    Khai triển và thực thi C�C;CÂU;LỆNH chừng nào lệnh cuối cùng trong "
+"“until� LỆNH\n"
+"    có trạng thái thoát là khác không.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại trạng thái của câu lệnh cuối cùng được chạy."
+
+#: builtins.c:1671
+#, fuzzy
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"Tạo tiến trình phụ tên TÊN.\n"
+"\n"
+"    Thực hiện LỆNH không đồng bộ có đầu vào/ra chuẩn nối đến ống dẫn\n"
+"    của bộ mô tả tập tin chỉ số 0 và 1 trong biến mảng TÊN trong hệ v�\n"
+"    được thực thi. TÊN mặc định là \"COPROC\".\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại trạng thái thoát của câu LỆNH."
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"�ịnh nghĩa hàm hệ v�.\n"
+"\n"
+"    Tạo hàm hệ v� tên TÊN. Khi được g�i dưới dạng một câu lệnh đơn\n"
+"    giản, TÊN chạy LỆNH trong ngữ cảnh của hệ v� g�i. Khi TÊN được\n"
+"    g�i, các đối số được gửi cho hàm dạng $1…$n, và tên hàm nằm\n"
+"    trong $FUNCNAME.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công nếu TÊN không phải chỉ đ�c."
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"Nhóm lệnh làm một đơn vị.\n"
+"\n"
+"    Chạy tập hợp các lệnh trong cùng một nhóm. �ây là một cách để\n"
+"    chuyển hướng toàn bộ một nhóm lệnh.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại trạng thái của câu lệnh cuối cùng được chạy."
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"Tiếp tục lại công việc ở trước.\n"
+"\n"
+"    Tương đương với đối số đặc tả công việc �TCV trong lệnh “fg�.\n"
+"    Tiếp tục lại công việc bị dừng chạy hay chạy n�n. �TCV có thể xác\n"
+"    định tên công việc hoặc mã số công việc. �ặt “&� sau �TCV sẽ chạy\n"
+"    công việc ở n�n, như là đối số đặc tả công việc trong “bg�.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại trạng thái của công việc đã tiếp tục lại."
+
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"�ịnh giá biểu thức số h�c.\n"
+"\n"
+"    BTHỨC được tính tùy theo các quy tắc v� định giá số h�c.\n"
+"    Tương đương với “let BTHỨC�.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại 1 nếu BTHỨC tính là 0; không thì trả lại 0."
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"Thực thi câu lệnh có đi�u kiện.\n"
+"\n"
+"    Trả v� trạng thái 0 hoặc 1 tùy vào phép tính biểu thức đi�u kiện\n"
+"    BTHỨC. Biểu thức bao gồm các thành phần dùng trong lệnh tích hợp\n"
+"    “test� và có thể được tổ hợp bằng các toán tử sau:\n"
+"    \n"
+"      ( BTHỨC )\t\tTrả v� giá trị của BTHỨC\n"
+"      ! BTHỨC\t\t�úng nếu BTHỨC là không đúng. Ngược lại sai\n"
+"      BTHỨC1 && BTHỨC2\t�úng nếu cả hai biểu thức đ�u đúng. Ngược lại sai.\n"
+"      BTHỨC1 || BTHỨC2\t�úng nếu một trong hai biểu thức đúng. Ngược lại "
+"sai.\n"
+"    \n"
+"    Khi dùng toán từ “==� và “!=�, chuỗi bên phải toán tử được dùng\n"
+"    làm mẫu, và thực hiện khớp mẫu. Khi dùng toán tử “=~�, chuỗi bên\n"
+"    phải toán tử được dùng làm biểu thức chính quy.\n"
+"\n"
+"    Toán tử “&&� và “||� không tính BTHỨC2 nếu BTHỨC1 đủ để xác định\n"
+"    giá trị toàn biểu thức.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    0 hay 1 phụ thuộc vào giá trị của BTHỨC."
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"Tên và cách dùng các biến hệ v� thư�ng dùng.\n"
+"\n"
+"    BASH_VERSION\n"
+"        \tThông tin phiên bản của Bash đang chạy.\n"
+"    CDPATH\tDanh sách thư mục cách nhau bằng dấu hai chấm để tìm\n"
+"        \tđối số thư mục trong lệnh “cd�.\n"
+"    GLOBIGNORE\tDanh sách mẫu cách nhau bằng dấu hai chấm diễn tả\n"
+"        \ttên tập tin bị b� qua không bung đư�ng dẫn.\n"
+"    HISTFILE\tTên tập tin chứa lịch sử câu lệnh của bạn.\n"
+"    HISTFILESIZE\n"
+"        \tSố dòng tối đa tập tin này có thể chứa.\n"
+"    HISTSIZE\tSố dòng tối đa mà hệ v� đang chạy có thể truy cập.\n"
+"    HOME\tTên đư�ng dẫn đầy đủ của thư mục đăng nhập của bạn.\n"
+"    HOSTNAME\tTên của máy hiện th�i của bạn.\n"
+"    HOSTTYPE\tLoại CPU phiên bản Bash này đang chạy.\n"
+"    IGNOREEOF\t�i�u khiển hành vi hệ v� khi nhận EOF là dữ liệu nhập\n"
+"        \tduy nhất. �ặt thì giá trị của nó là EOF có thể gặp\n"
+"        \tliên tục trên một dòng rỗng trước khi hệ v� kết thúc\n"
+"        \t(mặc định là 10). Không đặt thì EOF nghĩa là kết thúc\n"
+"        \tnhập.\n"
+"    MACHTYPE\tChuỗi mô tả hệ thống Bash đang chạy.\n"
+"    MAILCHECK\tSố giây giữa hai lần Bash kiểm tra có thư mới không.\n"
+"    MAILPATH\tDanh sách tên tập tin cách nhau bằng dấu hai chấm\n"
+"        \tđể Bash kiểm tra có thư mới không.\n"
+"    OSTYPE\tPhiên bản UNIX Bash đang chạy.\n"
+"    PATH\tDanh sách thư mục cách nhau bằng dấu hai chấm để tìm lệnh.\n"
+"    PROMPT_COMMAND\n"
+"        \tLệnh cần thực hiện trước khi in dấu nhắc chính.\n"
+"    PS1\t\tChuỗi dấu nhắc chính.\n"
+"    PS2\t\tChuỗi dấu nhắc phụ.\n"
+"    PWD\t\tTên đư�ng dẫn đầy đủ của thư mục hiện tại.\n"
+"    SHELLOPTS\tDanh sách tùy ch�n hệ v� được bật cách nhau bằng\n"
+"        \tdấu hai chấm.\n"
+"    TERM\tTên kiểu thiết bị cuối hiện th�i.\n"
+"    TIMEFORMAT\t�ịnh dạng kết xuất cho thống kê th�i gian của lệnh “time�.\n"
+"    auto_resume\tGiá trị khác rỗng thì trước tiên tìm một từ lệnh xuất\n"
+"        \thiện một mình trên một dòng, trong danh sách các công\n"
+"        \tviệc bị dừng chạy. Tìm ra thì đặt công việc đó vào n�n\n"
+"        \ttrước. Giá trị “exact� có nghĩa là từ lệnh phải tương\n"
+"        \tứng chính xác với một câu lệnh trong danh sách các\n"
+"        \tcông việc bị dừng chạy. Giá trị “substring� có nghĩa\n"
+"        \tlà từ lệnh phải tương ứng với một chuỗi phụ của công\n"
+"        \tviệc đó.\n"
+"    histchars\tCác ký tự đi�u khiển bung và thay thế lịch sử. Ký tự\n"
+"        \tđầu tiên thư�ng là ký tự thay thế lịch sử, thư�ng là\n"
+"        \t“!�. Ký tự thứ hai là ký tự thay thế nhanh, thư�ng là\n"
+"        \t“^�. Ký tự thứ ba là ký tự ghi chú v� lịch sử, thư�ng\n"
+"        \tlà “#�.\n"
+"    HISTIGNORE\tDanh sách mẫu cách bằng dấu hai chấm dùng để quyết định\n"
+"        \tnhững câu lệnh nào nên được lưu vào danh sách lịch sử.\n"
+
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Thêm thư mục vào ngăn xếp.\n"
+"    \n"
+"    Thêm thư mục vào đỉnh của ngăn xếp thư mục, hoặc xoay ngăn xếp, làm cho\n"
+"    thư mục mới đầu ngăn xếp là thư mục làm việc hiện th�i. Không có đối\n"
+"    số thì trao đổi hai thư mục đầu.\n"
+"    \n"
+"      -n\tNgăn chuyển đổi bình thư�ng khi thêm thư mục\n"
+"        \tvào ngăn xếp, để thao tác chỉ ngăn xếp.\n"
+"     \n"
+"      +N\tXoay ngăn xếp để thư mục thứ N (đếm từ trái danh sách\n"
+"        \t“dirs� (bắt đầu từ số không) d�i lên đầu.\n"
+"      \n"
+"      -N\tXoay ngăn xếp để thư mục thứ N (đếm từ phải danh sách\n"
+"        \t“dirs� (bắt đầu từ số không) d�i lên đầu.\n"
+"      \n"
+"      dir\tThêm THMỤC vào đầu ngăn xếp thư mục, cho nó làm thư mục\n"
+"        \tlàm việc hiện th�i mới.\n"
+"    \n"
+"    Lệnh tích hợp “dirs� hiển thị ngăn xếp thư mục.\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công nếu không đưa ra đối số sai, cũng không sai\n"
+"    chuyển đổi thư mục."
+
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"Gỡ b� thư mục kh�i ngăn xếp.\n"
+"    \n"
+"    Gỡ b� thư mục kh�i ngăn xếp thư mục. Không có đối số thì gỡ b� thư\n"
+"    mục đầu kh�i ngăn xếp và “cd� sang thư mục đầu mới.\n"
+"    \n"
+"      -n\tNgăn chuyển đổi bình thư�ng khi gỡ b� thư mục\n"
+"        \tkh�i ngăn xếp, để thao tác chỉ ngăn xếp.\n"
+"    \n"
+"      +N\tGỡ b� thư mục thứ N (đếm từ trái danh sách\n"
+"        \t“dirs�  (bắt đầu từ số không). Ví dụ: “popd +0� b�\n"
+"        \tthư mục cuối cùng, “popd +1� b� thư mục thứ hai.\n"
+"    \n"
+"      -N\tGỡ b� thư mục thứ N (đếm từ phải danh sách\n"
+"        \t“dirs� (bắt đầu từ số không). Ví dụ: “popd -0� b�\n"
+"        \tthư mục cuối cùng, “popd -1�  b� thư mục giáp cuối.\n"
+"    \n"
+"    Lệnh tích hợp “dirs� hiển thị ngăn xếp thư mục.\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công nếu không đưa ra đối số sai, cũng không sai\n"
+"    chuyển đổi thư mục."
+
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Hiển thị ngăn xếp thư mục.\n"
+"    \n"
+"    Hiển thị danh sách các thư mục được nhớ hiện th�i. Các thư mục\n"
+"    tìm thấy chỗ của chúng trong danh sách với lệnh “pushd�;\n"
+"    bạn có thể lấy bản sao dự phòng thông qua danh sách với lệnh “popd�.\n"
+"    \n"
+"    Tùy ch�n:\n"
+"      -c\txóa m�i phần tử trong ngăn xếp thư mục\n"
+"      -l\tđừng in phiên bản thư mục có dấu ngã\n"
+"        \t(tương đối so với thư mục chính của ngư�i dùng)\n"
+"      -p\tin ngăn xếp thư mục, mỗi dòng một mục\n"
+"      -v\tin ngăn xếp thư mục, mỗi dòng một mục kèm vị trí trong ngăn xếp\n"
+"    \n"
+"    �ối số:\n"
+"      +N\thiển thị mục thứ N bắt đầu từ bên trái danh sách\n"
+"                được hiển thị bằng “dirs� khi được g�i mà không đưa ra\n"
+"                tùy ch�n, bắt đầu từ số không.\n"
+"    \n"
+"      -N\thiển thị mục thứ N bắt đầu từ bên phải danh sách\n"
+"                được hiển thị bằng “dirs� khi được g�i mà không đưa ra\n"
+"                tùy ch�n, bắt đầu từ số không.\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Trả v� thành công nếu không đưa ra tùy ch�n sai hay gặp lỗi."
+
+#: builtins.c:1916
+#, fuzzy
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"�ặt và b� các tùy ch�n hệ v�.\n"
+"    \n"
+"    Thay đổi thiết lập của mỗi tùy ch�n hệ v� TÊN_TÙY_CHỌN.  Không có\n"
+"    đối số tùy ch�n thì liệt kê tất cả các tùy ch�n hệ v� kèm chỉ dẫn\n"
+"    tùy ch�n được đặt hay không.\n"
+"    \n"
+"    Tùy ch�n:\n"
+"      -o\thạn chế TÊN_TÙY_CHỌN những tên được định nghĩa\n"
+"        \tđể sử dụng với “set -o�\n"
+"      -p\tin mỗi tùy ch�n hệ v� kèm trạng thái\n"
+"      -q\tngăn kết xuất\n"
+"      -u\ttắt TÊN_TÙY_CHỌN\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công nếu TÊN_TÙY_CHỌN được bật; không thành công nếu\n"
+"    đưa ra tùy ch�n sai hay TÊN_TÙY_CHỌN bị tắt."
+
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"�ịnh dạng và in ��I-S� theo đi�u khiển của �ỊNH_DẠNG.\n"
+"    \n"
+"    Tùy ch�n:\n"
+"      -v BIẾN\tgán kết xuất cho biến hệ v� này thay vì\n"
+"        \thiển thị nó trên đầu ra chuẩn\n"
+"    \n"
+"    �ỊNH_DẠNG là chuỗi ký tự mà chứa ba kiểu đối tượng: ký tự bình\n"
+"    thư�ng, cái này được chép ra đầu ra chuẩn; dãy ký tự thoát, dùng để\n"
+"    chuyển đổi sau đó sao chép sang đầu ra chuẩn; và các ký hiệu đặc tả định "
+"dạng,\n"
+"    mỗi đặc tả này tác động lên đối số tương ứng.\n"
+"    \n"
+"    Ngoài đặc tả định dạng chuẩn được dùng trong printf(1) và printf(3),\n"
+"    printf được hiểu những đặc tả sau:\n"
+"    \n"
+"      %b\tkhai triển dãy thoát gạch chéo ngược trong đối số tương ứng\n"
+"      %q\ttrích dẫn đối số theo cách dùng lại làm dữ liệu đầu vào hệ v�\n"
+"      %(fmt)T\txuất chuỗi ngày tháng theo định dạng FMT từ strftime(3)\n"
+"    \n"
+"    �ịnh dạng được dùng lại để có thể dùng hết đối số. Nếu\n"
+"    ở đây có ít đối số hơn yêu cầu của định dạng, định dạng thừa đó được\n"
+"    xử lý theo cách là sẽ có giá trị bằng số không hay chuỗi rỗng,\n"
+"    được áp dụng.\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công trừ phi đưa ra tùy ch�n sai hay gặp lỗi khi ghi\n"
+"    hay gán."
+
+#: builtins.c:1971
+#, fuzzy
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Chỉ định cách tự hoàn thiện đối số bằng Readline.\n"
+"    \n"
+"    �ối với mỗi TÊN, ghi rõ các đối số sẽ được tự hoàn thiện như thế nào.\n"
+"    Không đưa ra tùy ch�n thì in ra các đặc tả tự hoàn thiện bằng một cách\n"
+"    cho phép dùng lại đặc tả làm dữ liệu nhập vào.\n"
+"    \n"
+"    Tùy ch�n:\n"
+"      -p\tin đặc tả tự hoàn thiện đã tồn tại theo định dạng dùng lại được\n"
+"      -r\tgỡ b� đặc tả tự hoàn thiện cho mỗi TÊN,\n"
+"        \thoặc nếu có TÊN thì gỡ b� tất cả các đặc tả tự hoàn thiện\n"
+"      -D\táp dụng các sự hoàn thành và hành động làm mặc định\n"
+"        \tcho câu lệnh mà không xác định sự hoàn thành riêng\n"
+"      -E\táp dụng các sự hoàn thành và hành động cho câu lệnh “trống�\n"
+"        \t(empty) -- thử hoàn thành trên dòng trắng\n"
+"    \n"
+"    Khi chức năng tự hoàn thiện được thử, những hành động được làm theo thứ\n"
+"    tự của những tùy ch�n chữ HOA bên trên. Tùy ch�n -D có quy�n ưu tiên\n"
+"    hơn -E.    \n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công nếu không đưa ra tùy ch�n sai hay gặp lỗi."
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"Hiển thị từ gợi ý có thể phụ thuộc vào các tùy ch�n.\n"
+"    \n"
+"    Dự định dùng từ bên trong một chức năng hệ v� mà tạo các việc\n"
+"    tự hoàn thiện có thể làm. Nếu đưa ra đối số TỪ vẫn tùy ch�n, thì tạo\n"
+"    các kết quả tương ứng với TỪ.\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công nếu không đưa ra tùy ch�n sai hay gặp lỗi."
+
+#: builtins.c:2016
+#, fuzzy
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"Sửa đổi hoặc hiển thị các tùy ch�n tự hoàn thiện.\n"
+"\n"
+"    Sửa đổi các tùy ch�n tự hoàn thiện đối với mỗi TÊN, hoặc nếu không đưa\n"
+"    ra TÊN thì chức năng tự hoàn thiện hiện tại sẽ được thi hành, nếu không\n"
+"    TÙY_CHỌN được chỉ ra, in ra các tùy ch�n tự hoàn thiện cho mỗi TÊN hay\n"
+"    các đặc tính kỹ thuật hiện có\n"
+"\n"
+"    Tùy ch�n:\n"
+"      -o tùy_ch�n\tđặt TÙY_CHỌN tự hoàn thiện này đối với mỗi TÊN\n"
+"      -D\t\tSửa TÙY_CHỌN v� tự hoàn thiện lệnh “default�\n"
+"      -E\t\tSửa TÙY_CHỌN v� tự hoàn thiện lệnh “empty�\n"
+"\n"
+"    Dùng “+o� thay cho “-o� thì tắt tùy ch�n đưa ra.\n"
+"\n"
+"    �ối số:\n"
+"\n"
+"    Mỗi TÊN tham chiếu đến một câu lệnh cho đó một đặc tả tự hoàn thiện\n"
+"    phải được xác định trước dùng tích hợp “complete�. Nếu không đưa\n"
+"    ra TÊN để áp dụng, thì “compopt� phải được g�i bởi một hàm đang\n"
+"    tạo việc tự hoàn thiện, và các tùy ch�n v� hàm tạo việc tự hoàn thiện "
+"Ä‘ang\n"
+"    chạy cũng được sửa đổi.\n"
+"\n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công trừ phi đưa ra tùy ch�n sai, hoặc TÊN có một\n"
+"    đặc tả tự hoàn thiện được xác định."
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"��c các dòng từ đầu vào tiêu chuẩn vào một biến mảng chỉ số.\n"
+"    \n"
+"    ��c các dòng từ đầu vào tiêu chuẩn vào biến mảng MẢNG, hoặc từ bộ\n"
+"    mô tả tập tin FD nếu đưa ra tùy ch�n -u. Biến MAPFILE là MẢNG mặc\n"
+"    định.\n"
+"    \n"
+"    Tùy ch�n:\n"
+"      -d ngăn_cách\tDùng NGĂN_C�CH chấm dứt dòng, thay cho ký tự dòng mới\n"
+"      -n S�\tsao chép nhi�u nhất S� dòng. Nếu là 0 thì sao chép m�i dòng.\n"
+"      -O G�C\tbắt đầu gán cho MẢNG ở chỉ số G�C. Chỉ số mặc định là 0.\n"
+"      -s S�\tb� qua S� dòng đầu tiên được đ�c.\n"
+"      -t\tgỡ b� một ký tự NGĂN_C�CH theo sau kh�i mỗi dòng được đ�c\n"
+"        \t(mặc định là ký tự dòng mới).\n"
+"      -u FD\tđ�c các dòng từ bộ mô tả tập tin FD thay vào từ đầu vào tiêu "
+"chuẩn.\n"
+"      -C GỌI_NGƯỢC\tđịnh giá GỌI_NGƯỢC mỗi lần đ�c LƯỢNG dòng.\n"
+"      -c LƯỢNG\tghi rõ số các dòng được đ�c giữa hai lần GỌI_NGƯỢC.\n"
+"    \n"
+"    �ối số:\n"
+"      MẢNG\ttên biến mảng cần dùng cho dữ liệu tập tin.\n"
+"    \n"
+"    Nếu đưa ra -C mà không có -c thì lượng mặc định là 5000. Khi ước\n"
+"    lượng l�i GỌI_NGƯỢC thì nó nhận chỉ số của phần tử mảng kế tiếp\n"
+"    được gán dưới dạng một đối số bổ sung.\n"
+"    \n"
+"    Không đưa ra một G�C rõ ràng thì mapfile (tập tin sơ đồ) sẽ xóa\n"
+"    sạch MẢNG trước khi gán cho nó.\n"
+"    \n"
+"    Trạng thái thoát:\n"
+"    Trả lại thành công trừ phi đưa ra tùy ch�n sai và MẢNG không phải\n"
+"    chỉ đ�c hay không là một mảng chỉ số."
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"��c các dòng từ một tập tin vào một biến mảng.\n"
+"    \n"
+"    Giống với “mapfile�."
+
+#, fuzzy
+#~ msgid "Copyright (C) 2019 Free Software Foundation, Inc."
+#~ msgstr "Tác quy�n (C) năm 2015 của Tổ chức Quỹ Phần m�m Tự do, Inc."
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "Trả lại ngữ cảnh của cú g�i thủ tục con hiện th�i.\n"
+#~ "\n"
+#~ "    Nếu không có BTHỨC thì trả v� "
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process: tiến trình %5ld (%s) trong the_pipeline"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "Tín hiệu lạ #"
+
+#~ msgid "Copyright (C) 2014 Free Software Foundation, Inc."
+#~ msgstr "Tác quy�n (C) năm 2014 của Tổ chức Quỹ Phần m�m Tự do, Inc."
+
+#~ msgid ":"
+#~ msgstr ":"
+
+#~ msgid "true"
+#~ msgstr "true"
+
+#~ msgid "false"
+#~ msgstr "false"
+
+#~ msgid "times"
+#~ msgstr "times"
+
+#~ msgid "Copyright (C) 2009 Free Software Foundation, Inc.\n"
+#~ msgstr "Tác quy�n (C) năm 2009 của Tổ chức Phần m�m Tự do.\n"
+
+#~ msgid ""
+#~ "License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl."
+#~ "html>\n"
+#~ msgstr ""
+#~ "Giấy phép GPLv2+: GNU GPL phiên bản 2 hoặc mới hơn <http://gnu.org/"
+#~ "licenses/gpl.html>\n"
+
+#~ msgid ""
+#~ ".  With EXPR, returns\n"
+#~ "    "
+#~ msgstr ""
+#~ ".  Cũng dùng BTHỨC thì trả lại\n"
+#~ "    "
+
+#~ msgid ""
+#~ "; this extra information can be used to\n"
+#~ "    provide a stack trace.\n"
+#~ "    \n"
+#~ "    The value of EXPR indicates how many call frames to go back before "
+#~ "the\n"
+#~ "    current one; the top frame is frame 0."
+#~ msgstr ""
+#~ "; thông tin thêm này có thể được sử dụng\n"
+#~ "\tđể cung cấp một vết ngăn xếp (stack trace).\n"
+#~ "\n"
+#~ "\tGiá trị của BTHỨC ngụ ý bao nhiêu khung g�i cần lùi lại\n"
+#~ "\ttương đối với cái hiện th�i; khung trên cùng là khung 0."
diff --git a/po/zh_CN.gmo b/po/zh_CN.gmo
new file mode 100644
index 0000000..9712f24
--- /dev/null
+++ b/po/zh_CN.gmo
diff --git a/po/zh_CN.po b/po/zh_CN.po
new file mode 100644
index 0000000..17b11c3
--- /dev/null
+++ b/po/zh_CN.po
@@ -0,0 +1,5724 @@
+# Chinese (Simplified) translation for bash package
+# Copyright (C) 2010, 2011, 2013 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+# Xin Ye <alyex.ye@gmail.com>, 2010.
+# Aron Xu <happyaron.xu@gmail.com>, 2011.
+# Anthony Fok <foka@debian.org>, 2013.
+# Wylmer Wang <wantinghard@gmail.com>, 2014.
+# Mingcong Bai <jeffbai@aosc.xyz>, 2015.
+# liushuyu <liushuyu011@gmail.com>, 2016.
+# Mingye Wang <arthur200126@gmail.com>, 2015, 2016.
+# Boyuan Yang <073plan@gmail.com>, 2018, 2019.
+#
+# KNOWN DEFECTS (easy fixes, tedious work; sorted by priority):
+#  0. Translation coverage when upstream sends new strings.
+#
+#  1. Argument lists in `help` are translated, but the `help blah` text still
+#     refers to the original name like WORDS.
+#
+#     These long helps should be changed to follow their `help` synopsis.  Use
+#     <�数> to refer to `�数' in the one-line synopsis.
+#
+#  2. Passive voice.  When used inappropriately, they sound even worse in
+#     Chinese than in English.  In fact huge amounts of `被' is what you use to
+#     spot translated text.  (You don't always need `被' for passive voice
+#     either.)
+#
+#  3. Typography.
+#     a. Capitalization.  English convensions mangle command names in help text
+#        if it's the first word of the sentense (e.g. `Getopts blah blah...').
+#        Do yourself a favor and change the names back into lowercase.
+#     b. Quotes.  Chinese has no `typewriter quote' convension, and standard
+#        “curly quotes� should be used.
+#     c. Colons.  We don't use `: ` in Chinese; use `：`.  Sometimes `:` is seen
+#        w/o a space (worse).
+#     d. Other stuff like parentheses and whitespace.  Alignment can be quite
+#        important for Feeling Good(TM).
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: bash 5.0\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2019-01-08 15:20-0500\n"
+"Last-Translator: Boyuan Yang <073plan@gmail.com>\n"
+"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
+"Language: zh_CN\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"X-Generator: Poedit 2.2\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "数组下标�正确"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr "%s：正在移除�称引用属性"
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s：无法将索引数组转化为关�数组"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s：无效的关�数组键"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s：无法为�数字的索引赋值"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr "%s：%s：为关�数组赋值时必须使用下标"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s：无法创建: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr "bash_execute_unix_command: 无法为命令找到键映射"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s：第一个�空字符�是“\"�"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "%2$s 中没有闭�的“%1$c�"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s：缺少冒�分隔符"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "“%s�: 无法解除绑定"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr "大括�展开：无法为 %s 分�内存"
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr "大括�展开：为 %u 个元素分�内存失败"
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr "大括�展开：为“%s�分�内存失败"
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "“%s�: 无效的别�"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "未�用行编辑"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "“%s�: 无效的键映射�"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s：无法读�: %s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "“%s�: 未知函数�"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s 未与任何键绑定。\n"
+
+#  Blame the source string.
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s �以被调用，通过 "
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "“%s�: 无法解除绑定"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "循环计数"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "仅在 `for'， `while'， 或者`until' 循环中有�义"
+
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"返回当��调用的上下文。\n"
+"    \n"
+"    �带有 EXPR 时，返回 \"$line $filename\"。带有 EXPR 时，返回\n"
+"    \"$line $subroutine $filename\"；这个�外的信��以被用于�供\n"
+"    栈追踪。\n"
+"    \n"
+"    EXPR 的值 显示了到当�调用帧需�回去多少个调用帧；顶部帧\n"
+"    是第 0 帧。\n"
+"    \n"
+"    退出状�：\n"
+"    除� shell �在执行一个 shell 函数或者 EXPR 无效，�则返回结\n"
+"    果为0。"
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "HOME 未设定"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "�数太多"
+
+#: builtins/cd.def:342
+msgid "null directory"
+msgstr "空目录"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "OLDPWD 未设定"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "第 %d 行："
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "警告："
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s：用法："
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s：选项需�一个�数"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s：需�数字�数"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s：未找到"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s：无效选项"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s：无效的选项�"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "“%s�: �是有效的标识符"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "无效的八进制数"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "无效的�六进制数"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "无效数字"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s：无效的信�声明"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "“%s�: �是有效的进程�或者任务声明"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s：�读��"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s：%s 越界"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "�数"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s 越界"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s：无此任务"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s：无任务控制"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "无任务控制"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s：��的"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "��的"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s：�是 shell 内建"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "写错误: %s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "设定终端属性时出错: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "获�终端属性时出错: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s：获�当�目录时出错: %s：%s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s：模糊的任务声明"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr "此版本内帮助��用"
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s：无法�消设定: �读 %s"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s：无法�消设定"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s：无效的动作�"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s：没有补全声明"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "警告: -F 选项�能��您预期的那样工作"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "警告: -C 选项�能��您预期的那样工作"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "当�未执行补全功能"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "�能在函数中使用"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr "%s：引用���能为数组"
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr "%s：��许�称引用��引用自身"
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s：循环���引用"
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "“%s�: 无效的�称引用���"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "无法用 `-f' 生�函数"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s：�读函数"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr "%s：引�内的��数组赋值已被弃用"
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s：无法以这�方�销�数组��"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s：无法将关�数组转化为索引数组"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "动�加载��用"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "无法打开共享对象 %s：%s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "无法在共享对象 %2$s 中找到 %1$s: %3$s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s：未以动�方�加载"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr "为 %s 载入函数失败 (%d): 未载入"
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s：未以动�方�加载"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s：无法删除: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s：是一个目录"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s：�是常规文件"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s：文件太大"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s：无法执行二进制文件"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s：无法执行: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "注销\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "�是登录 shell: 使用 `exit'"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "有�止的任务。\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "有�行中的任务。\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "未找到命令"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "历�声明"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s：无法打开临时文件: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "当�"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "在�带任务控制的情况下�动了任务 %d"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s：�法选项 -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s：选项需�一个�数 -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "已�用哈希"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s：哈希表为空\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "命中\t命令\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Shell 命令匹�关键字“"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"没有与“%s�匹�的帮助主题。�试使用“help help��“man -k %s�或“info %s�。"
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s：无法打开: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"这些 shell 命令是内部定义的。请输入 `help' 以获�一个列表。\n"
+"输入 `help �称' 以得到有关函数`�称'的更多信�。\n"
+"使用 `info bash' �获得关于 shell 的更多一般性信�。\n"
+"使用 `man -k' 或 `info' �获��在列表中的命令的更多信�。\n"
+"\n"
+"�称�边的星�(*)表示该命令被�用。\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "最多�能使用 -anrw 选项中的一个"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "历��置"
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s：无效时间戳"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s：历�扩展失败"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s：inlib 失败"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "其他选项�能与 `-x' �时使用"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s：�数必须是进程或任务 ID"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "未知错误"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "需�表达�"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s：�是一个索引数组"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s：无效的文件�述符声明"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: 无效的文件�述符: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s：无效的行数"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s：无效的数组基数"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s：无效的回调��"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "空数组���"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "需�数组��支�"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "“%s�: 缺少格�字符"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "“%c�：无效的时间格�声明"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "“%c�：无效格�字符"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "警告: %s：%s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "格�解�问题: %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "使用了 \\x 但缺少�六进制�"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "使用了 \\%c 但缺少 unicode 数"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "无其他目录"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s：无效�数"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<无当�目录>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "目录栈为空"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "目录栈索引"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"显示当�记�的目录列表。 目录\n"
+"    通过 `pushd' 命令加入这个列表；您�以\n"
+"    使用 `popd' 命令对列表进行�历。\n"
+"    \n"
+"    选项:\n"
+"      -c\t删除所有元素以清除目录栈\n"
+"      -l\t�打�与家目录相关的以波浪�\n"
+"    \t为�缀的目录\n"
+"      -p\t�行一个�目打�目录栈\n"
+"      -v\t以栈�置为�缀，�行一个�目\n"
+"    \t打�目录栈\n"
+"    \n"
+"    �数:\n"
+"      +N\t以 dirs �带选项输出的顺�显示列表从左起第N个�目，\n"
+"    \t从 0 开始。\n"
+"    \n"
+"      -N\t以 dirs �带选项输出的顺�显示列表从�起第N个项目，\n"
+"\t从 0 开始。"
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"在目录栈顶部加入一个目录，或者论询\n"
+"    目录栈，是当�工作目录�为新的栈顶\n"
+"    �带�数时，交�栈顶的两个目录。\n"
+"    \n"
+"    选项：\n"
+"      -n\t抑制增加栈中目录时通常的改�目录的�作，\n"
+"    \t从而�进行栈�作。\n"
+"    \n"
+"    �数：\n"
+"      +N\t轮转栈使得第N个目录(`dirs' 的\n"
+"    \t输出列表中左起，从0开始)\n"
+"    \t�至栈顶。\n"
+"    \n"
+"      -N\t轮转栈使得第N个目录(`dirs' 的\n"
+"    \t输出列表中�起，从0开始)\n"
+"    \t�至栈顶\n"
+"    \n"
+"      dir\t添加目录至栈顶，并\n"
+"    \t使其�为新的当�工作目录。\n"
+"    \n"
+"    `dirs' 内建命令显示目录栈."
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"从目录栈中删除�目。�带�数时，删除\n"
+"    栈顶目录并改�至新的栈顶目录。\n"
+"    \n"
+"    选项：\n"
+"      -n\t抑制从栈中删除目录时通常的改�目录�作，\n"
+"    \t从而�进行栈�作。\n"
+"    \n"
+"    �数：\n"
+"      +N\t从 `dirs' 输出的列表中，\n"
+"    \t删除左起第N个�目，计数从0开始。例如：`popd +0'\n"
+"    \t删除第一个目录，`popd +1' 删除第二个。\n"
+"    \n"
+"      -N\t从 `dirs' 输出的列表中，\n"
+"    \t删除�起第N个�目，计数从0开始，例如：`popd -0'\n"
+"    \t删除最�一个�目，`popd -1' 删除倒数第二个。\n"
+"    \n"
+"    `dirs' 内建��显示目录栈。"
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s：无效的超时声明"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "读错误: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr "�能从函数或者�脚本返回(`return')"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "无法�时�消设定一个函数和一个��"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s：�是数组��"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s：�是函数"
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr "%s：无法导出"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "�移计数"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "无法�时设定和�消设定 shell 选项"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s：无效的 shell 选项�"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "需�文件��数"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s：文件未找到"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "无法挂起"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "无法挂起一个登录 shell"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s 是“%s�的别�\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s 是 shell 关键字\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s 是函数\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s 是特殊 shell 内建\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s 是 shell 内建\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s 是 %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s 已被录入哈希表 (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s：无效的 limit �数"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "“%c�：命令错误"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s：无法获� limit 值: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "limit"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s：无法修改 limit 值: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "八进制数"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "“%c�：无效的符�状��算符"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "“%c�：无效的符�状�字符"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr "行"
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "上一个命令: %s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "中止..."
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr "报告："
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "未知的命令错误"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "错误的命令类型"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "错误的�件连接符"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "错误的跳转"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s：未绑定的��"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\a 等待输入超时：自动注销\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "无法从 /dev/null �定�标准输入: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "时间格�: `%c': 无效的格�字符"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr "execute_coproc: 副进程 [%d:%s] �然存在"
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "管�错误"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr "eval: 超出最大 eval 嵌套层数 (%d)"
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr "%s：超出最大 source 嵌套层数 (%d)"
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr "%s：超出最大函数嵌套层数 (%d)"
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s：��的: 无法在命令�中使用 `/'"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s：未找到命令"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s：%s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s：%s：解释器错误"
+
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s：无法执行二进制文件: %s"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "“%s�: 特殊内建"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "无法�制文件�述符 %d 到文件�述符 %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "表达�递归层次越界"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "递归栈下溢"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "表达�中有语法错误"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "�试给���赋值"
+
+#: expr.c:530
+msgid "syntax error in variable assignment"
+msgstr "��赋值中有语法错误"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "除以 0"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "错误：表达�赋值符�错误"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "�件表达�需� `:'"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "指数�于 0"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "预增符或预�符�应跟有标识符"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "缺少“)�"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "语法错误: 需��作数"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "语法错误: 无效的算术�算符"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s：%s (错误符�是 \"%s\")"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "无效的算术进制"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s：无效的行数"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "数值太大��为算术进制的基"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s：表达�错误\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: 无法访问父目录"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "无法为文件�述符 %d �置nodelay模�"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr "无法从文件�述符 %d 为 bash 的输入获�一个新的文件�述符"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input: 已�存在新的文件�述符 %d 的缓冲区"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: 进程组管�"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "�分 (fork) 出的的进程� %d 出现在�行中的任务 %d 中"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "删除进程组 %2$ld 中已�止的任务 %1$d"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process: 进程� %5ld(%s) 标注为�活�"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: 无此进程�"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "信� %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "已完�"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "已�止"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "已�止(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "�行中"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "已完�(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "退出 %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "未知状�"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "（核心已转储）"
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (工作目录: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "�进程 setpgid (%ld 到 %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: 进程� %ld �是当� shell 的�进程"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wiat_for: 没有进程 %ld 的记录"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: 任务 %d 已�止"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s：无此任务"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s：任务已�终止"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s：任务 %d 已在��"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr "waitchld: 打开 WNOHANG 以��无�阻塞"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s：行 %d: "
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (核心已转储)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(当�工作目录：%s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: getpgrp 失败"
+
+#: jobs.c:4447
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control: ��无任务控制"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: 行规则"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "无法设定终端进程组(%d)"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "此 shell 中无任务控制"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: 断言失败: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d：断言已修补\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "未知"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: 空闲链表中的���"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free：调用时用了已�释放的�作为�数"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: 调用时用了未分�的�作为�数"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: 检测到下溢；mh_nbytes 越界"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: 检测到下溢；mh_nbytes 越界"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: 其实和末尾�大��一致"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc：调用时用了未分�的�作为�数"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc: 检测到下溢；mh_nbytes 越界"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc: 检测到下溢；mh_nbytes 越界"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: 其实和末尾�大��一致"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: 分�表已�充满了 FIND_ALLOC？\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: %p 在表中显示为已分�？\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: %p 在表中显示为已释放？\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "无效的基"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s：未知主机"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s：无效的�务"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s：错误的网络路径声明"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "�支�网络�作"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale：LC_ALL：无法改�区域选项 (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale：LC_ALL：无法改�区域选项 (%s)：%s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale：%s：无法改�区域选项 (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale：%s：无法改�区域选项 (%s)：%s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "您在 $_ 中有邮件"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "您在 $_ 中有新邮件"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "%s 中的邮件已被读过\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "语法错误：需�算术表达�"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "语法错误：需� `;'"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "语法错误：`((%s))'"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document：错误的指令类型 %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr "立�文档在第 %d 行被文件结�符分隔 (需�“%s�)"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr "make_redirection：�定�指令“%d�越界"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr "shell_getc：shell_input_line_size (%zu) 超过 SIZE_MAX (%lu)：行被截断"
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr "超出最大立�文档数�"
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "寻找匹�的“%c�时�到了未预期的文件结�符"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "寻找“]]�时�到了未预期的文件结�符"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "�件表达�中有语法错误：未预期的符�“%s�"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "�件表达�中有语法错误"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "未预期的符�“%s� ，需�“)�"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "需�“)�"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "一元�件�算符使用了未预期的�数“%s�"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "一元�件�算符使用了未预期的�数"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "未预期的符�“%s�，需�二元�件�算符"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "需�二元�件�算符"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "二元�件�算符使用了未预期的�数“%s�"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "二元�件�算符使用了未预期的�数"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "�件命令中有未预期的符�“%c�"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "�件命令中有未预期的符�“%s�"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "�件命令中有未预期的符� %d"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "未预期的符�“%s�附近有语法错误"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "“%s�附近有语法错误"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "语法错误: 未预期的文件结尾"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "语法错误"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "使用 \"%s\" 退出 shell 。\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "寻找匹�的“)�时�到了未预期的文件结�符"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "补全：未找到函数 “%s�"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr "programmable_completion: %s：疑似�试循环"
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s：空的补全声明"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: 错误的�件连接符 `%d'"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: 无效的文件�述符"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: 空的文件指针"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != fileno xtrace fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: `%c': 无效的格�字符"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "文件�述符超出范围"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s：模糊的�定�"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s：无法覆盖已存在的文件"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s：��的: 无法�定�输出"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "无法为立�文档创建临时文件: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s：无法将文件�述符赋值给��"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "没有网络时�支� /dev/(tcp|udp)/host/port"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "�定�错误: 无法�制文件�述符"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "无法找到 /tmp ，请创建�"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp 必须为有效的目录�"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr "在交互� shell 中将忽略美化输出模�"
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: 无效的选项"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "无法将 uid 设为 %d: 有效 uid %d"
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "无法将 gid 设为 %d: 有效 gid %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr "无法�动调试器；调试模�已�用"
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr "%s：是一个目录"
+
+# 这个是查看用户的 /etc/passwd 信�得到的�字。既然是用户的�字，就��无���。（有点想写“红领巾���。）
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "无���"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash，版本 %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"用法：\t%s [GNU 长选项] [选项] ...\n"
+"\t%s [GNU 长选项] [选项] 脚本文件 ...\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "GNU 长选项:\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Shell 选项:\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-irsD 或 -c <命令> 或 -O <shopt 选项>\t\t(仅适�调用)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s 或 -o <选项>\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr "请输入`%s -c \"help set\"' 以获得关于 shell 选项的更多信�\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr "请输入 `%s -c help' 以获得关于 shell 内建命令的更多信�.\n"
+
+# 写如何报告程�错误的地方应该�到如何报告翻译问题。
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr ""
+"请使用“bashbug�命令�报告程�错误。\n"
+"请将翻译错误报告到 <i18n-zh@googlegroups.com>。\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr "bash 首页：<http://www.gnu.org/software/bash>\n"
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr "使用 GNU 软件的通用帮助：<http://www.gnu.org/gethelp/>\n"
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: 无效的�作"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "伪信�"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "挂断"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "中断"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "退出"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "�法的指令"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "断点追踪/陷阱"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "放弃指令"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "模拟器陷阱指令"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "浮点数异常"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "已�死"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "总线错误"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "段错误"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "错误的系统调用"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "管�破裂"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "闹钟"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "已终止"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "紧急 I/O 状况"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "已�止(信�)"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "继续"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "�进程已死或者�止"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "已�止(tty 输入)"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "已�止(tty 输出)"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "I/O 就绪"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "CPU �制"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "文件�制"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "报警(虚拟)"
+
+# Personally I treat this as something coming from alarm() by a profiler.
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "报警(分�)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "窗�已改�"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "记录�"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "用户信�1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "用户信�2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "HFT 待输入数�"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "�将�电"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "系统�将崩溃"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "�移进程至�一个 CPU"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "编程错误"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "已授予 HFT 监视模�"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "已撤销 HFT 监视模�"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "已完� HFT 声音�列"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "信�请求"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "未知信� #%d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "错误的替�: 在 %2$s 中没有闭�的 `%1$s'"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s：无法将链表赋值给数组�员"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "无法为进程替�创建管�"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "无法为进程替�创建�进程"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "无法打开命�管� %s 以读�"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "无法打开命�管� %s 进行写入"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "无法将命�管� %s 作为文件�述符 %d �制"
+
+#: subst.c:6213
+msgid "command substitution: ignored null byte in input"
+msgstr "命令替�：忽略输入中的 null 字节"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "无法为命令替�创建管�"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "无法为命令替�创建�进程"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute: 无法将管��制为文件�述符 1"
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s：无效的引用���"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s：无效的间接展开"
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr "%s：无效的���"
+
+#: subst.c:7256
+#, c-format
+msgid "%s: parameter not set"
+msgstr "%s：�数未设置"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s：�数为空或未设置"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s：�串表达� < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s：错误的替�"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s：无法这样赋值"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr "未�版本的 shell 会强制估值为算术替�"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "错误的替�: 在 %s 中没有闭�的 \"`\""
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "无匹�: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "需��数"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s：需�整数表达�"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "需�“)�"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "需�“)�，�找到 %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s：需�二元表达�"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s：需�一元表达�"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "缺少 `]'"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "语法错误：需� `;'"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "无效的信�数"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr "trap handler: 超出最大的 trap handler 层次 (%d)"
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: trap_list[%d] 中的错误值: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr "run_pending_traps: 信�处�器是 SIG_DFL，�新�� %d (%s) 给自己"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: 错误的信� %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "“%s�函数定义导入错误"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "shell 层次 (%d) 太高，�置为 1"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: 当�作用域中没有函数上下文"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s：����赋值"
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr "%s：将整数赋值给�称引用"
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: 当�作用域中没有函数上下文"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s 的 exportstr 为空"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "%2$s 的 exportstr 中有无效的字符 %1$d"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "%s 的 exportstr 中没有“=�"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr "pop_var_context: shell_variables 的头部�是函数上下文"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: 没有 global_variables 上下文"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr "pop_scope: shell_variables 的头部�是临时环境作用域"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s：%s：无法作为文件打开"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s：%s：追踪文件�述符的值无效"
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s：%s：兼容版本数值越界"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "版�所有 (C) 2013 自由软件基金会."
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"许�� GPLv3+: GNU GPL 许��第三版或者更新版本 <http://gnu.org/licenses/gpl."
+"html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash，版本 %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr "本软件是自由软件，您�以自由地更改和�新�布。"
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "在法律许�的情况下特此明示，本软件��供任何担�。"
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s：无法分� %lu 字节 (已分� %lu 字节)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s：无法分� %lu 字节"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s：%s:%d：无法分� %lu 字节 (已分� %lu 字节)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s：%s:%d：无法分� %lu 字节"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [�称[=值] ... ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] �称 [�称 ...]"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpvsPSVX] [-m 键映射] [-f 文件�] [-q �称] [-u �称] [-r 键�列] [-x "
+"键�列:shell-命令] [键�列:readline-函数 或 readline-命令]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [shell 内建 [�数 ...]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [表达�]"
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]] [-@]] [目录]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] 命令 [�数 ...]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilnrtux] [-p] [�称[=值] ...]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilnrtux] [-p] �称[=值] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [option] �称[=值] ..."
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [�数 ...]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [�数 ...]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f 文件�] [�称 ...]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [�数 ...]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts 选项字符串 �称 [�数]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a �称] [命令 [�数 ...]] [�定� ...]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr "fc [-e 编辑器�] [-lnr] [起始] [终结] 或 fc -s [模�=替�串] [命令]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [任务声明]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [任务声明 ...]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p 路径�] [-dt] [�称 ...]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [模� ...]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d �移�] [n] 或 history -anrw [文件�] 或 history -ps �数 "
+"[�数...]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [任务声明 ...] 或 jobs -x 命令 [�数]"
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [任务声明 ... | pid ...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s 信�声明 | -n 信�编� | -信�声明] 进程� | 任务声明 ... 或 kill -"
+"l [信�声明]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let �数 [�数 ...]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a 数组] [-d 分隔符] [-i 缓冲区文字] [-n 读�字符数] [-N 读�字"
+"符数] [-p �示符] [-t 超时] [-u 文件�述符] [�称 ...]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [--abefhkmnptuvxBCHP] [-o 选项�] [--] [�数 ...]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [�称 ...]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [�称[=值] ...] 或 export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [�称[=值] ...] 或 readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source 文件� [�数]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". 文件� [�数]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [表达�]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ �数... ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[�数] 信�声明 ...]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] �称 [�称 ...]"
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [�制]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [模�]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-fn] [编� ...]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [进程� ...]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for �称 [in �语 ... ] ; do 命令; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( 表达�1; 表达�2; 表达�3 )); do 命令; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select NAME [in �语 ... ;] do 命令; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] 管�"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case � in [模� [| 模�]...) 命令 ;;]... esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr "if 命令; then 命令; [ elif 命令; then 命令; ]... [ else 命令; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while 命令; do 命令; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until 命令; do 命令; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [�称] 命令 [�定�]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function �称 { 命令 ; } 或 name () { 命令 ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ 命令 ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "job_spec [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( 表达� ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ 表达� ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "variables - 一些 shell ��的�称和�义"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | 目录]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [选项� ...]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v var] 格� [�数]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o 选项] [-A 动作] [-G 全局模�] [-W "
+"�语列表]  [-F 函数] [-C 命令] [-X 过滤模�] [-P �缀] [-S �缀] [�称 ...]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o 选项]  [-A 动作] [-G 全局模�] [-W �语列表]  [-"
+"F 函数] [-C 命令] [-X 过滤模�] [-P �缀] [-S �缀] [�语]"
+
+#: builtins.c:239
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o 选项] [-DEI] [�称 ...]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-d 分隔符] [-n 计数] [-O 起始��] [-s 计数] [-t] [-u fd] [-C 回调] "
+"[-c ��] [数组]"
+
+#: builtins.c:244
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-d 定界符] [-n 计数] [-O 起始��] [-s 计数] [-t] [-u fd] [-C 回"
+"调] [-c ��] [数组]"
+
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"定义或显示别�。\n"
+"    \n"
+"    �带�数时，`alias' 以��用的格�\n"
+"    `alias �称=值'在标准输出设备上打�别�列表。\n"
+"    \n"
+"    �则，对于�个给定值的�称定义一个别�。\n"
+"    值末尾的空格会使下一个�被检测作为别�替�展开。\n"
+"    \n"
+"    选项：\n"
+"      -p\t以��用的格�打�所有的已定义的别�\n"
+"    \n"
+"    退出状�：\n"
+"    除�一个没有定义的�字被作为�数�供，�则 alias \n"
+"    返回值为真。"
+
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"从别�定义列表中删除�一个“�字�。\n"
+"    \n"
+"    选项：\n"
+"      -a\t删除所有的别�定义\n"
+"    \n"
+"    返回�功，除�“�字��是一个已存在的别�。"
+
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"设定 Readline 键绑定和��。\n"
+"    \n"
+"    绑定一个键�列到一个 Readline 函数或者�，或者设定一个\n"
+"    Readline ��。�选项�数的语法和 ~/.inputrc 文件中的等\n"
+"    �，但是必须作为一个�数被传递，\n"
+"    例如，bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    选项：\n"
+"      -m  键映射      在此命令执行过程中使用指定的键映射。\n"
+"                     �被接�的键映射�字有 emacs�emacs-standard�emacs-"
+"meta�\n"
+"                     emacs-ctlx�vi�vi-move�vi-command�和 vi-insert。\n"
+"      -l             列出函数�称。\n"
+"      -P             列出函数�称和绑定。\n"
+"      -p             以�以�新用作输入的格�列出函数�称和绑定。\n"
+"      -S             列出�以�动�的键�列以�它们的值\n"
+"      -s             以�以�新用作输入的格�列出�以�动�的键以�它们的"
+"值。\n"
+"      -V             列出����和它们的值\n"
+"      -v             以�以�新用作输入的格�列出��的�称和它们的值\n"
+"      -q  函数�      查询指定的函数�以由哪些键�动。\n"
+"      -u  函数�      �绑定所有绑定至指定函数的键。\n"
+"      -r  键�列      �消指定键�列的绑定。\n"
+"      -f  文件�      从指定文件中读�键绑定。\n"
+"      -x  键�列:shell命令\t当指定的键�列被输入时，执行指定的 shell 命令。\n"
+"      -X             以�被�用的形�列出用 -x 绑定的键�列和命令。\n"
+"    \n"
+"    退出状�：\n"
+"    除�使用了无法辨认的选项或者错误�生，�则返回0."
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"退出 for�while 或 until 循环\n"
+"    \n"
+"    退出一个 FOR�WHILE 或 UNTIL 循环。如果指定了N，则跳出N�\n"
+"    循环\n"
+"    \n"
+"    退出状�：\n"
+"    退出状�为0除� N �大于或等于 1。"
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"继续 for�while 或 until 循环。\n"
+"    \n"
+"    继续当� FOR�WHILE 或 UNTIL 循环的下一步。\n"
+"    如果指定了 N， 则继续当�的第 N �循环。\n"
+"    \n"
+"    退出状�：\n"
+"    退出状�为 0 除� N �大于或等于1。"
+
+#: builtins.c:354
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"执行 shell 内建。\n"
+"    \n"
+"    带�数 ARGs 执行 SHELL-BUILTIN 内建，并且��命令查询\n"
+"    在希望以 shell 函数的形���新实现 shell 内建，\n"
+"    并且希望在函数之内执行该 shell 内建的情况下有用处。\n"
+"    \n"
+"    退出状�：\n"
+"    以 SHELL-BUILTIN 内建的退出状�为准，或者如果 SHELL-BUILTIN �是一个\n"
+"    shell 内建时为�。"
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"返回当��调用的上下文。\n"
+"    \n"
+"    �带有 EXPR 时，返回 \"$line $filename\"。带有 EXPR 时，返回\n"
+"    \"$line $subroutine $filename\"；这个�外的信��以被用于�供\n"
+"    栈追踪。\n"
+"    \n"
+"    EXPR 的值 显示了到当�调用帧需�回去多少个调用帧；顶部帧\n"
+"    是第 0 帧。\n"
+"    \n"
+"    退出状�：\n"
+"    除� shell �在执行一个 shell 函数或者 EXPR 无效，�则返回结\n"
+"    果为0。"
+
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"改� shell 工作目录。\n"
+"    \n"
+"    改�当�目录至 DIR 目录。默认的 DIR 目录是 shell �� HOME\n"
+"    的值。\n"
+"    \n"
+"    �� CDPATH 定义了�有 DIR 的目录的�索路径，其中��的目录�称由冒� (:)"
+"分隔。\n"
+"    一个空的目录�称表示当�目录。如果�切�到的 DIR 由斜� (/) 开头，则 "
+"CDPATH\n"
+"    �会用上��。\n"
+"    \n"
+"    如果路径找�到，并且 shell 选项 `cdable_vars' 被设定，则�数�被�定为一"
+"个\n"
+"    ���。如果该��有值，则它的值被当作 DIR 目录。\n"
+"    \n"
+"    选项：\n"
+"        -L\t强制跟�符�链接: 在处� `..' 之�解� DIR 中的符�链接。\n"
+"        -P\t使用物�目录结构而�跟�符�链接: 在处� `..' 之�解� DIR 中的符"
+"�链接。\n"
+"        -e\t如果使用了 -P �数，但�能�功确定当�工作目录时，返回�零的返回"
+"值。\n"
+"        -@\t在支�拓展属性的系统上，将一个有这些属性的文件当作有文件属性的目"
+"录。\n"
+"    \n"
+"    默认情况下跟�符�链接，如�指定 `-L'。\n"
+"    `..' 使用移除��相邻目录��员直到 DIR 开始或一个斜�的方�处�。\n"
+"    \n"
+"    退出状�：\n"
+"    如果目录改�，或在使用 -P 选项时 $PWD 修改�功时返回 0，�则�零。"
+
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"打�当�工作目录的�字。\n"
+"    \n"
+"    选项：\n"
+"      -L\t打� $PWD ��的值，如果它包�了当�的工作目录\n"
+"      -P\t打�当�的物�路径，�带有任何的符�链接\n"
+"    \n"
+"    默认情况下，`pwd' 的行为和带 `-L' 选项一致\n"
+"    \n"
+"    退出状�：\n"
+"    除�使用了无效选项或者当�目录��读，�则返回状�为0。"
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"空的命令。\n"
+"    \n"
+"    没有效果； 此命令��任何�作。\n"
+"    \n"
+"    退出状�：\n"
+"    总是�功。"
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"返回一个�功结果。\n"
+"    \n"
+"    退出状�：\n"
+"    总是�功。"
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"返回一个��功的结果。\n"
+"    \n"
+"    退出状�：\n"
+"    总是失败。"
+
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"执行一个简�命令或者显示命令的相关信�。\n"
+"    \n"
+"    带 ARGS �数�行 COMMAND 命令且抑制 shell 函数查询，或显示\n"
+"    指定的 COMMAND 命令的信�。�以在存在相��称的函数定义的\n"
+"    情况下用于�动�盘上的命令。\n"
+"    \n"
+"    选项：\n"
+"      -p\t使用 PATH ��的一个默认值以确�所有的标准工具都能被找到。\n"
+"      -v\t打� COMMAND 命令的�述，和 `type' 内建相似\n"
+"      -V\t打��个 COMMAND 命令的详细�述\n"
+"    \n"
+"    退出状�\n"
+"    返回 COMMAND 命令的返回状�，或者当找�到 COMMAND 命令时失败。"
+
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"设定��值和属性。\n"
+"    \n"
+"    声明��并且赋予它们属性。如果没有给定�称，\n"
+"    则显示所有��的属性和值。\n"
+"    \n"
+"    选项：\n"
+"      -f\t�制动作或显示为仅函数�称和定义\n"
+"      -F\t�制仅显示函数�称 (以�调试时显示行�和�文件�)\n"
+"      -g\t当用于 shell 函数内时创建全局��; �则忽略\n"
+"      -p\t显示�个 NAME ��的属性和值\n"
+"    \n"
+"    设定属性的选项：\n"
+"      -a\t使 NAME �为下标数组 (如果支�)\n"
+"      -A\t使 NAME �为关�数组 (如果支�)\n"
+"      -i\t使 NAME 带有 `integer' (整数)属性\n"
+"      -l\t将 NAME 在赋值时转为�写\n"
+"      -n\t使 NAME �为指�一个以其值为�称的��的引用\n"
+"      -r\t将 NAME �为�读\n"
+"      -t\t使 NAME 带有 `trace' (追踪)属性\n"
+"      -u\t将�个 NAME 在赋值时转为大写\n"
+"      -x\t将 NAME 导出\n"
+"    \n"
+"    用 `+' 代替 `-' 会关闭指定选项。\n"
+"    \n"
+"    带有整数属性的��在赋值时将使用算术估值(�\n"
+"    `let' 命令)\n"
+"    \n"
+"    在函数中使用时，`declare' 使 NAME �为本地��，和 `local'\n"
+"    命令一致。`-g' 选项抑制此行为。\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功，除��供了无效选项或者�生��赋值错误。"
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"设置��的值和属性。\n"
+"    \n"
+"    `declare'  的等价形�。�� `help declare'。"
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"定义本地��。\n"
+"    \n"
+"    创建一个以 NAME 为�称的��，并且将 VALUE 赋值给它。\n"
+"    OPTION 选项�以是任何能被 `declare' 接�的选项。\n"
+"    \n"
+"    本地���能在函数内部被使用，它们�能在定义它们的函数内\n"
+"    部以��函数中��。\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功，除�使用了无效的选项��生了赋值错误或者 shell �在执行一个函"
+"数。"
+
+#: builtins.c:557
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"将�数写到标准输出。\n"
+"    \n"
+"    在标准输出上，显示用空格分割的 ARG �数�跟一个�行。\n"
+"    \n"
+"    选项：\n"
+"      -n\t��追加�行\n"
+"      -e\t�用下列�斜�转义的解释\n"
+"      -E\t显�地抑制对于�斜�转义的解释\n"
+"    \n"
+"    `echo' 对下列�斜�字符进行转义：\n"
+"      \a\t警告(�铃)\n"
+"      \\b\t退格\n"
+"      \\c\t抑制更多的输出\n"
+"      \\e\t转义字符\n"
+"      \\f\t�页字符\n"
+"      \\n\t�行\n"
+"      \\r\t回车\n"
+"      \\t\t横�制表符\n"
+"      \\v\t纵�制表符\n"
+"      \\\\\t�斜�\n"
+"      \\0nnn\t以 NNN（八进制）为 ASCII �的字符。NNN �以是 0 到 3 个八进制"
+"�\n"
+"      \\xHH\t以 HH（�六进制）为值的八比特字符。HH �以是一个或两个�六进制"
+"�\n"
+"      \\uHHHH\t以 HHHH（�六进制）为值的 Unicode 字符。HHHH �以是一个到\n"
+"    \t\t四个�六进制�。\n"
+"      \\UHHHHHHHH 以 HHHHHHHH（�六进制）为值的 Unicode 字符。\n"
+"    \t\tHHHHHHHH �以是一到八个�六进制�。\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功除�有写错误�生。"
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"写�数至标准输出设备。\n"
+"    \n"
+"    在标准输出设备上显示 ARGs �数和一个�行。\n"
+"    \n"
+"    选项：\n"
+"      -n\t�附加�行\n"
+"    \n"
+"    退出状�：\n"
+"    除�写错误�生，�则返回�功。"
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"�用和�用 shell 内建。\n"
+"    \n"
+"    �用和�用 shell 的内建命令。�用使您能够执行一个和内建\n"
+"    命令��的�盘上的命令，而无须使用完整的路径�。\n"
+"    \n"
+"    \n"
+"    选项：\n"
+"      -a\t打�一个内建的列表，并显示其中�一个是��用\n"
+"      -n\t�用�一个 NAME 内建或者显示一个被�用的内建的列表\n"
+"      -p\t以��用的格�打�一个内建的列表\n"
+"      -s\t仅打�Posix `special'  内建的�称\n"
+"    \n"
+"    控制动�加载的选项：\n"
+"      -f\t从共享对象 FILENAME 文件中加载 NAME 内建\n"
+"      -d\t删除以 -f 选项加载的内建\n"
+"    \n"
+"    �带选项时，�一个 NAME 内建都被�用。\n"
+"    \n"
+"    如果�使用 $PATH 中找到的 `test' 而�是 shell 内建的版本，\n"
+"    输入 `enable -n test'。\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功，除� NAME �是一个 shell 内建或者有错误�生。"
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"将�数作为 shell 命令执行。\n"
+"    \n"
+"    将 ARGs ��一个字符串，用结果作为 shell 的输入，\n"
+"    并且执行得到的命令。\n"
+"    \n"
+"    退出状�：\n"
+"    以命令的状�退出，或者在命令为空的情况下返回�功。"
+
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"解�选项�数。\n"
+"    \n"
+"    getopts 被 shell 过程用于解��定�的�数作为选项。\n"
+"    \n"
+"    \n"
+"    OPTSTRING 字符串包�待识别的选项字�；如果一个字���跟\n"
+"    �分�，则该选项需�一个�数，而该�数应用空格与选项分开。\n"
+"    \n"
+"    \n"
+"    �次�动时，getopts 会将下一个选项放到 shell �� $name\n"
+"    中，如果 name ���存在则先将其�始化，而下一个待处\n"
+"    �的�数��放入 shell �� OPTIND 中。OPTIND ��在�\n"
+"    次 shell 或者 shell 脚本�动时都被�始化为1。当一个选项�\n"
+"    求有一个�数时，getopts 将�数放入 shell �� OPTARG\n"
+"    中。\n"
+"    \n"
+"    getopts 有两�报告错误的方法。如果 OPTSTRING ��的第\n"
+"    一个字符是冒�，getopts 使用沉默错误报告。在这�模�\n"
+"    下，�会打�错误消�。如果看到了一个无效的选项，\n"
+"    getopts 将找到的选项字符放至 OPTARG ��中。如果一个必\n"
+"    须的选项没有找到，getopts 放一个 ':' 到 NAME ��中并且设\n"
+"    置 OPTARG ��为找到的选项字符。如果 getopts �在沉默模\n"
+"    �中，并且�到了一个无效的选项，getopts 放置一个 '?' 到 NAME \n"
+"    ��中并且�消设定 OPTARG��。如果必须的选项没有找到，\n"
+"    一个'?'会被放入 NAME��中，OPTARG 将被�消设定，并且会\n"
+"    打�一个诊断信�。\n"
+"    \n"
+"    如果 shell �� OPTERR 的值为0，getopts �用\n"
+"    错误信�的打�，�使 OPTSTRING ��的第一个字符�是一\n"
+"    个冒�。OPTERR 的默认值为1.\n"
+"    \n"
+"    getopts 通常解��定�的�数($0 - $9)，�过如果�供了\n"
+"    更多的�数，它们�而会被解�。\n"
+"    \n"
+"    退出状�：\n"
+"    如果一个选项被找到则返回�功；如果�到了选项的结尾或者\n"
+"    有错误�生则返回失败。"
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"使用指定命令替� shell。\n"
+"    \n"
+"    执行 COMMAND 命令，以指定的程�替�这个 shell。\n"
+"    ARGUMENTS �数�为 COMMAND命令的�数。如果\n"
+"    没有指定COMMAND 命令，则任何的�定�在当� shell 中生效。\n"
+"    \n"
+"    选项：\n"
+"      -a �称\t作为第0个�数传递给 COMMAND 命令\n"
+"      -c\t\t在一个空环境中执行 COMMAND 命令\n"
+"      -l\t\t在COMMAND 命令的第0个�数中加一个短线\n"
+"    \n"
+"    如果命令�能被执行，则退出一个�交互�的 shell，除�\n"
+"   shell 选项`execfail' 已�设定。\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功除� COMMAND 命令没有找到或者出现一个�定�错误。"
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"退出shell。\n"
+"    \n"
+"    以状� N 退出 shell。  如果 N 被�略，则退出状�\n"
+"    为最�一个执行的命令的退出状�。"
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"退出一个登录 shell.\n"
+"    \n"
+"    以状� N 退出一个登录 shell。如果�在登录 shell 中执行，则\n"
+"    返回一个错误。"
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"从历�列表中显示或者执行命令。\n"
+"    \n"
+"    fc 被用于从历�列表中列出或者�新编辑并执行命令。\n"
+"    FIRST 和 LAST ���以是数字用于指定范围，或者 FIRST �以是\n"
+"    字符串，�味�以这个字符串打头的最近的一个命令。\n"
+"    \n"
+"    \n"
+"    选项：\n"
+"      -e ENAME\t选择使用哪个编辑器。默认的是 FCEDIT, 然�是 EDITOR，\n"
+"    \t\t然�是 vi\n"
+"      -l \t列出行而�编辑\n"
+"      -n\t列举时�略行�\n"
+"      -r\t�转行的顺�(最新行在�)\n"
+"    \n"
+"    用 `fc -s [模�=替� ...] [命令]' 的格�，COMMAND 命令会在 OLD=NEW\n"
+"    替�之�被�新执行。\n"
+"    \n"
+"    r='fc -s' 是一个有用的别�，这样的�输入 `r cc'会执行最�一个以 `cc'\n"
+"    开头的命令，输入 `r'会�新执行最�一个命令。\n"
+"    \n"
+"    \n"
+"    退出状�：\n"
+"    返回�功，或者执行的命令的状�；如果错误�生则返回�零。"
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"将任务移至��。\n"
+"    \n"
+"    将以 JOB_SPEC 标识的任务放至��，使其�为\n"
+"    当�任务。如果 JOB_SPEC �存在，shell 观念中的当�任务 \n"
+"    将被使用。\n"
+"    \n"
+"    退出状�：\n"
+"    放至��的命令状�，或者当错误�生时为失败。"
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"移动任务至��。\n"
+"    \n"
+"    将 JOB_SPEC 标识的任务放至��，就�它们\n"
+"    是带 `&' �动的一样。如果 JOB_SPEC �存在，shell 观念中的\n"
+"    当�任务将会被使用。\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功除�任务管�没有�用或者错误�生。"
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"记�或显示程��置。\n"
+"    \n"
+"    确定并记��一个给定 NAME �称的命令的完整路径。\n"
+"    如果��供�数，则显示已�记�的命令的信�。\n"
+"    \n"
+"    选项：\n"
+"      -d\t\t忘记�一个已�记�的 NAME 的�置\n"
+"      -l\t\t以�作为输入�用的格�显示\n"
+"      -p pathname\t使用 pathname 路径作为 NAME 命令的全路径\n"
+"      -r\t\t忘记所有记�的�置\n"
+"      -t\t\t打�记�的�一个 NAME �称的�置，如果指定了多个\n"
+"    \t\tNAME �称，则�个�置��会加上相应的 NAME �称\n"
+"    \t\t\n"
+"    �数：\n"
+"      NAME\t\t�个 NAME �称会在 $PATH 路径��中被�索，并且添加到记�的命"
+"令\n"
+"    列表中。\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功，除� NAME 命令没有找到或者使用了无效的选项。"
+
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"显示内建命令的相关信�。\n"
+"    \n"
+"    显示内建命令的简略信�。如果指定了 PATTERN 模�，\n"
+"    给出所有匹� PATTERN 模�的命令的详细帮助，�则打\n"
+"    �一个帮助主题列表\n"
+"    \n"
+"    选项：\n"
+"      -d\t输出�个主题的简短�述\n"
+"      -m\t以伪 man 手册的格�显示使用方法\n"
+"      -s\t为�一个匹� PATTERN 模�的主题仅显示一个用法\n"
+"    \t简介\n"
+"    \n"
+"    �数：\n"
+"      PATTERN\t指定帮助主题的模�\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功，除�未找到 PATTERN 模�没有找到或者使用了无效选项。"
+
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"显示或�纵历�列表。\n"
+"    \n"
+"    带行�显示历�列表，将�个被修改的�目加上 `*' �缀。\n"
+"    �数 N 会仅列出最�的 N 个�目。\n"
+"    \n"
+"    选项：\n"
+"      -c\t删除所有�目从而清空历�列表。\n"
+"      -d �移�\t从指定�置删除历�列表。负�移�将从历��目末尾\n"
+"    \t\t开始计数\n"
+"    \n"
+"      -a\t将当�会�的历�行追加到历�文件中\n"
+"      -n\t从历�文件中读�所有未被读�的行\n"
+"    \t\t并且将它们附加到历�列表\n"
+"      -r\t读�历�文件并将内容追加到历�列表中\n"
+"      -w\t将当�历�写入到历�文件中\n"
+"    \n"
+"      -p\t对�一个 ARG �数展开历�并显示结果，而�存储到历�列表中\n"
+"      -s\t以��记录追加 ARG 到历�列表中\n"
+"    \n"
+"    如果给定了 FILENAME 文件�，则它将被作为历�文件。�则\n"
+"    如果 $HISTFILE ��有值的�使用之，�然使用 ~/.bash_history 文件。\n"
+"    \n"
+"    如果 $HISTTIMEFORMAT ��被设定并且�为空，它的值会被用于\n"
+"    strftime(3) 的格�字符串�打�与�一个显示的历��目想关�的\n"
+"    时间戳，�则�打�时间戳。\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功，除�使用了无效的选项或者�生错误。"
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"显示任务状�。\n"
+"    \n"
+"    列出活动的任务。JOBSPEC �制仅输出指定的任务。\n"
+"    �带选项时，所有活动任务的状�都会显示。\n"
+"    \n"
+"    选项：\n"
+"      -l\t在正常信�基础上列出进程�\n"
+"      -n\t仅列出上次通告之�改�了状�的进程\n"
+"      -p\t仅列出进程�\n"
+"      -r\t�制仅输出�行中的任务\n"
+"      -s\t�制仅输出�止的任务\n"
+"    \n"
+"    如果使用了 -x 选项，ARG �数中的所有任务声明会被替�为该任务\n"
+"    的进程组头领的进程�，然�执行 COMMAND 命令。\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功，除�使用了无效的选项或者有错误�生。\n"
+"    如果使用 -x 选项，则返回 COMMAND 命令的退出状�。"
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"从当� shell 中删除任务。\n"
+"    \n"
+"    从活动任务表中删除�一个 JOBSPEC �数。�带任何\n"
+"    JOBSPEC �数时，shell 使用观念中的当�任务。\n"
+"    \n"
+"    选项：\n"
+"      -a\t如果��供 JOBSPEC �数，则删除所有任务\n"
+"      -h\t标识�个 JOBSPEC 任务，从而当 shell 接收到 SIGHUP\n"
+"    \t\t信�时��� SIGHUP 给指定任务\n"
+"      -r\t仅删除�行中的任务\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功除�使用了无效的选项或者 JOBSPEC 声明。"
+
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"�一个任务��一个信�。\n"
+"    \n"
+"    �以 PID 进程�或者 JOBSPEC 任务声明指定的进程��一个以\n"
+"    SIGSPEC 信�声明或 SIGNUM 信�编�命�的信�。如果没有指定\n"
+"    SIGSPEC 或 SIGNUM，那么�定�� SIGTERM 信�。\n"
+"    \n"
+"    选项：\n"
+"      -s sig\tSIG 是信��称\n"
+"      -n sig\tSIG 是信�编�\n"
+"      -l\t列出信��称；如果�数�跟 `-l'则被�设为信�编�，\n"
+"    \t\t而相应的信��称会被列出\n"
+"    \n"
+"    Kill �为 shell 内建有两个�由：它�许使用任务编�而�是进程�，\n"
+"    并且在�以创建的进程数上�达到是�许进程被�死。\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功，除�使用了无效的选项或者有错误�生。"
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"估值算术表达�。\n"
+"    \n"
+"    将�个 ARG �赛作为算术表达��估值。估值的计算以定宽的整\n"
+"    数完�，�带溢出检测，�过除 0 是被置陷阱的并且会报一个错\n"
+"    误。下列�作符被按照相�的算术优先级组�。列表的顺�按照\n"
+"    优先级从高至低。\n"
+"    \n"
+"    \n"
+"    \tid++, id--\t���置加，�置�\n"
+"    \t++id, --id\t���置加，�置�\n"
+"    \t-, +\t\t一元�法，一元加法\n"
+"    \t!, ~\t\t逻辑和���\n"
+"    \t**\t\t指数\n"
+"    \t*, /, %\t\t乘法，除法，�余数\n"
+"    \t+, -\t\t增加，�少\n"
+"    \t<<, >>\t\t�左和��按�移�\n"
+"    \t<=, >=, <, >\t比较\n"
+"    \t==, !=\t\t等于，�等于\n"
+"    \t&\t\t按�与\n"
+"    \t^\t\t按�异或\n"
+"    \t|\t\t按�或\n"
+"    \t&&\t\t逻辑与\n"
+"    \t||\t\t逻辑或\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\t�件�作符\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\t赋值\n"
+"    \n"
+"    Shell ���许作为�作数。表达�中的��的�称会被�代以值\n"
+"    (强制转�为定宽的整数)。表达�中的���需�打开整数属性。\n"
+"    \n"
+"    �作符按照优先级进行估值。括�中的�表达�将被先估值，并��代上述表达�"
+"规则。\n"
+"    \n"
+"    退出状�：\n"
+"    如果最�一个 ARG �数估值为 0，则 let 返回 1； �则 let 返回 0。"
+
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"从标准输入读�一行并将其分为��的域。\n"
+"    \n"
+"    从标准输入读��独的一行，或者如果使用了 -u 选项，从文件�述符 FD 中读"
+"�。\n"
+"    该行被分割�域，如��语分割一样，并且第一个�被赋值给第一个 NAME ��，"
+"第二\n"
+"    个�被赋值给第二个 NAME ��，如此继续，直到剩下所有的�被赋值给最�一个 "
+"NAME\n"
+"    ��。�有 $IFS ��中的字符被认作是�语分隔符。\n"
+"    \n"
+"    如果没有�供 NAME ��，则读�的行被存放在 REPLY ��中。\n"
+"    \n"
+"    选项：\n"
+"      -a array\t将�语赋值给 ARRAY 数组��的�列下标�员，从零开始\n"
+"      -d delim\t�续读�直到读入 DELIM ��中的第一个字符，而�是�行符\n"
+"      -e\t使用 Readline 获�行\n"
+"      -i text\t使用 TEXT 文本作为 Readline 的�始文字\n"
+"      -n nchars\t读� nchars 个字符之�返回，而�是等到读��行符。\n"
+"    \t\t但是分隔符�然有效，如果�到分隔符之�读�了�足 nchars 个字符。\n"
+"      -N nchars\t在准确读�了 nchars 个字符之�返回，除��到文件结�符或者读"
+"超时，\n"
+"    \t\t任何的分隔符都被忽略\n"
+"      -p prompt\t在�试读�之�输出 PROMPT �示符并且�带\n"
+"    \t\t�行符\n"
+"      -r\t��许�斜�转义任何字符\n"
+"      -s\t�回显终端的任何输入\n"
+"      -t timeout\t如果在 TIMEOUT 秒内没有读�一个完整的行则超时并且返回失"
+"败。\n"
+"    \t\tTMOUT ��的值是默认的超时时间。TIMEOUT �以是�数。\n"
+"    \t\t如果 TIMEOUT 是 0，那么仅当在指定的文件�述符上输入有效的时候，\n"
+"    \t\tread �返回�功；�则它将立刻返回而��试读�任何数�。\n"
+"    \t\t如果超过了超时时间，则返回状��大于 128\n"
+"      -u fd\t从文件�述符 FD 中读�，而�是标准输入\n"
+"    \n"
+"    退出状�：\n"
+"    返回�为零，除��到了文件结�符�读超时（且返回��大于128）�\n"
+"    出现了��赋值错误或者无效的文件�述符作为�数传递给了 -u 选项。"
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"从一个 shell 函数返回。\n"
+"    \n"
+"    使一个函数或者被引用的脚本以指定的返回值 N 退出。\n"
+"    如果 N 被�略，则返回状�就是\n"
+"    函数或脚本中的最�一个执行的命令的状�。\n"
+"    \n"
+"    退出状�：\n"
+"    返回 N，或者如果 shell �在执行一个函数或引用脚本时，失败。"
+
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"设定或�消设定 shell 选项和�置�数的值。\n"
+"    \n"
+"    改� shell 选项和�置�数的值，或者显示 shell ��的\n"
+"    �称和值。\n"
+"    \n"
+"    选项：\n"
+"      -a  标记修改的或者创建的��为导出。\n"
+"      -b  立�通告任务终结。\n"
+"      -e  如果一个命令以�零状�退出，则立�退出。\n"
+"      -f  �用文件�生�(模�匹�)。\n"
+"      -h  当查询命令时记�它们的�置\n"
+"      -k  所有的赋值�数被放在命令的环境中，而�仅仅是\n"
+"          命令�称之�的�数。\n"
+"      -m  �用任务控制。\n"
+"      -n  读�命令但�执行\n"
+"      -o 选项�\n"
+"          设定与选项�对应的��：\n"
+"              allexport    与 -a 相�\n"
+"              braceexpand  与 -B 相�\n"
+"              emacs       使用 emacs 风格的行编辑界�\n"
+"              errexit      与 -e 相�\n"
+"              errtrace     与 -E 相�\n"
+"              functrace    与 -T 相�\n"
+"              hashall      与 -h 相�\n"
+"              histexpand   与 -H 相�\n"
+"              history      �用命令历�\n"
+"              ignoreeof    shell 读�文件结�符时�会退出\n"
+"              interactive-comments\n"
+"                           �许在交互�命令中显示注释\n"
+"              keyword      与 -k 相�\n"
+"              monitor      与 -m 相�\n"
+"              noclobber    与 -C 相�\n"
+"              noexec       与 -n 相�\n"
+"              noglob       与 -f 相�\n"
+"              nolog        目��接�但是被忽略\n"
+"              notify       与 -b 相�\n"
+"              nounset      与 -u 相�\n"
+"              onecmd       与 -t 相�\n"
+"              physical     与 -P 相�\n"
+"              pipefail     管�的返回值是最�一个�零返回值的命令的返回结"
+"果，\n"
+"                           或者当所有命令都返回零是也为零。\n"
+"              posix        改�默认时和 Posix 标准��的 bash 行为\n"
+"                           以匹�标准\n"
+"              privileged   与 -p 相�\n"
+"              verbose      与 -v 相�\n"
+"              vi           使用 vi 风格的行编辑界�\n"
+"              xtrace       与 -x 相�\n"
+"      -p  无论何时当真实的有效的用户身份�匹�时打开。\n"
+"          �用对 $ENV 文件的处�以�导入 shell 函数。\n"
+"          关闭此选项会导致有效的用户编�和组编�设定\n"
+"          为真实的用户编�和组编�\n"
+"      -t  读�并执行一个命令之�退出。\n"
+"      -u  替�时将为设定的��当作错误对待。\n"
+"      -v  读� shell 输入行时将它们打�。\n"
+"      -x  执行命令时打�它们以��数。\n"
+"      -B  shell 将执行花括�扩展。\n"
+"      -C  设定之��止以�定�输出的方�覆盖常\n"
+"          规文件。\n"
+"      -E  设定之� ERR 陷阱会被 shell 函数继承。\n"
+"      -H  �用 ! 风格的历�替�。当 shell 是交互�的\n"
+"          时候这个标识�默认打开。\n"
+"      -P  设定之�类似 cd 的会改�当�目录的命令�\n"
+"          追踪符�链接。\n"
+"      -T  设定之� DEBUG 陷阱会被 shell 函数继承。\n"
+"      --  任何剩余的�数会被赋值给�置�数。如果没\n"
+"          有剩余的�数，�置�数�会被设置。\n"
+"      -   任何剩余的�数会被赋值给�置�数。\n"
+"          -x 和 -v 选项已关闭。\n"
+"    \n"
+"    使用 + 而�是 - 会使标志�被关闭。标志�也�以在\n"
+"    shell 被�动时使用。当�的标志�设定�以在 $- �\n"
+"    �中找到。剩余的 ARG �数是�置�数并且是按照\n"
+"    $1, $2, .. $n 的顺�被赋值的。如果没有给定 ARG\n"
+"    �数，则打�所有的 shell ��。\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功除�使用了无效的�数。"
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"�消设定 shell ��和函数的值和属性。\n"
+"    \n"
+"    对�一个 NAME �称，删除对应的��或函数。\n"
+"    \n"
+"    选项：\n"
+"      -f\t将�个 NAME 视为函数\n"
+"      -v\t将�个 NAME 视为��\n"
+"      -n\t将�个 NAME 视为�称引用，��消其本身而�其指�的��\n"
+"    \n"
+"    �带选项时，unset 首先�试�消设定一个��，如果失败，��试�消设定一个"
+"函数。\n"
+"    \n"
+"    �些����以被�消设定；�� `readonly'。\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功，除�使用了无效的选项或者 NAME �称为�读。"
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"为 shell ��设定导出属性。\n"
+"    \n"
+"    标记�个 NAME �称为自动导出到�续命令执行的环境。如果�供了 VALUE\n"
+"    则导出�将 VALUE 作为赋值。\n"
+"    \n"
+"    选项：\n"
+"      -f\t指 shell 函数\n"
+"      -n\t删除�个 NAME �称的导出属性\n"
+"      -p\t显示所有导出的��和函数的列表\n"
+"    \n"
+"    `--' 的�数�用进一步的选项处�。\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功，除�使用了无效的选项或者 NAME �称。"
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"标记 shell ��为��改�。\n"
+"    \n"
+"    标记�一个 NAME �称为�读；这些 NAME ��的值将��以被�续的赋值\n"
+"    �作所改�。如果�供了 VALUE，则在标记为�读之�将 VALUE 值赋给��。\n"
+"    \n"
+"    选项：\n"
+"      -a\t指下标数组��\n"
+"      -A\t指关�数组标�\n"
+"      -f\t指 shell 函数\n"
+"      -p\t显示�读��或函数列表，�决于是��供了 -f 选项\n"
+"    \n"
+"    `--' 的�数�用进一步的选项处�。\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功，除�使用了无效的选项或者 NAME �称。"
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"移��置�数。\n"
+"    \n"
+"    �命��置�数 $N+1�$N+2 ... 到 $1�$2 ...  如果没有给定 N，\n"
+"    则�设为1.\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功，除� N 为负或者大于 $#。"
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"在当� shell 中执行一个文件中的命令。\n"
+"    \n"
+"    在当� shell 中读�并执行 FILENAME 文件中的命令。$PATH ��中的\n"
+"    �目被用于寻找包� FILENAME 文件的目录。如果�供了任何的 ARGUMENTS\n"
+"    �数，则它们将�为 FILENAME 文件执行时的�置�数。\n"
+"    \n"
+"    退出状�：\n"
+"    返回 FILENAME 文件中最�一个命令的状�；如果 FILENAME 文件��读则失败。"
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"挂起 shell 执行。\n"
+"    \n"
+"    挂起 shell 的执行直到收到 SIGCONT 信�。\n"
+"    登录 shell ��以被挂起，除�强制执行。\n"
+"    \n"
+"    选项：\n"
+"      -f\t强制挂起，�使是登录 shell。\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功，除�没有�用任务控制或者有错误�生。"
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"对�件表达�进行估值。\n"
+"    \n"
+"    根� EXPR 表达�的估值以状� 0 (真) 或 1 (伪) 退出。\n"
+"    表达��以是一元或者二元的。一元表达�通常用于检测\n"
+"    文件状�。�时还有字符串�作符和数字比较�作符。\n"
+"    \n"
+"    文件�作符：\n"
+"    \n"
+"      -a 文件        如果文件存在则为真。\n"
+"      -b 文件        如果文件为�特殊文件则为真。\n"
+"      -c 文件        如果文件为字符特殊文件则为真。\n"
+"      -d 文件        如果文件为目录则为真。\n"
+"      -e 文件        如果文件存在则为真。\n"
+"      -f 文件        如果文件存在且为常规文件则为真。\n"
+"      -g 文件        如果文件的组属性设置打开则为真。\n"
+"      -h 文件        如果文件为符�链接则为真。\n"
+"      -L 文件        如果文件为符�链接则为真。\n"
+"      -k 文件        如果文件的粘滞 (sticky) �设定则为真。\n"
+"      -p 文件        如果文件为命�管�则为真。\n"
+"      -r 文件        如果文件对于您是�读的则为真。\n"
+"      -s 文件        如果文件存在且�为空则为真。\n"
+"      -S 文件        如果文件是套接字则为真。\n"
+"      -t 文件�述符   如果文件�述符在一个终端上打开则为真。\n"
+"      -u 文件        如果文件的用户数行设置打开则为真。\n"
+"      -w 文件        如果文件对您是�写的则为真\n"
+"      -x 文件        如果文件对您是�执行的则为真。\n"
+"      -O 文件        如果文件是被您所有的则为真。\n"
+"      -G 文件        如果文件被您的组所有则为真。\n"
+"      -N 文件        如果文件上次被读�之�修改过则为真。\n"
+"    \n"
+"      FILE1 -nt FILE2  如果 file1 文件新于 file2 文件则为真(根�\n"
+"                       修改日期)。\n"
+"    \n"
+"      FILE1 -ot FILE2  如果 file1 文件旧于 file2 文件则为真。\n"
+"    \n"
+"      FILE1 -ef FILE2  如果 file1 文件是 file2 文件的硬链接则为真。\n"
+"    \n"
+"    字符串�作符\n"
+"    \n"
+"      -z 字符串      如果字符串为空则为真。\n"
+"    \n"
+"      -n 字符串\n"
+"         字符串      如果字符串�为空则为真。\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     如果 string1 和 string2 字符串相�则为真。\n"
+"      STRING1 != STRING2\n"
+"                     如果 string1 和 string2 字符串�相�则为真。\n"
+"      STRING1 < STRING2\n"
+"                     如果按字典排� string1 在 string2 串之�则为真。\n"
+"      STRING1 > STRING2\n"
+"                     如果按字典排� string1 在 string2 串之�则为真。\n"
+"    \n"
+"    其他�作符：\n"
+"    \n"
+"      -o 选项        如果指定 shell 选项�用则为真。\n"
+"      -v VAR         如果指定 Shell �� VAR 已赋值则为真。\n"
+"      -R VAR         如果指定 Shell �� VAR 已赋值且为�称引用则为真。\n"
+"      ! EXPR         如果表达� expr 为�则为真。\n"
+"      EXPR1 -a EXPR2 如果 expr1 和 expr2 都为真则为真。\n"
+"      EXPR1 -o EXPR2 如果 expr1 和 expr2 有一个为真则为真。\n"
+"    \n"
+"      arg1 OP arg2   算术测试。OP�作符�以是 -eq�-ne�\n"
+"                     -lt�-le�-gt�或 -ge 中的一个。\n"
+"    \n"
+"    二元算术�作返回真，如果 ARG1 �数等于��等于�\n"
+"    �于��于等于�大于�或者大于等于 ARG2 �数。\n"
+"    \n"
+"    退出状�：\n"
+"    如果 EXPR 表达�估值为真则返回�功；如果 EXPR 表达�估值\n"
+"    为�或者使用了无效的�数则返回失败。"
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"估值�件表达�。\n"
+"    \n"
+"    是内建命令 \"test\" 的�义�，但是最�一个�数必须是\n"
+"    字符 `]'，以匹�起始的 `['。"
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"显示进程时间\n"
+"    \n"
+"    打� shell �其所有�进程的累计用户空间和\n"
+"    系统空间执行时间。\n"
+"    \n"
+"    退出状�\n"
+"    总是�功。"
+
+# EXIT and DEBUG should be as-is. Use before you translate, please.
+# The -signal is only an example; Read carefully.
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"对信�和其他事件设陷阱。\n"
+"    \n"
+"    定义一个处�器，在 shell 接收到信�和其他�件下执行。\n"
+"    \n"
+"    ARG �数是当 shell 接收到 SIGNAL_SPEC 信�时读�和执行的命令。\n"
+"    如果没有指定 ARG �数 (并且�给出一个 SIGNAL_SPEC 信�) 或者\n"
+" ARG �数为\n"
+"    `-'，�一个指定的�数会被�置为原始值。如果 ARG �数是一个空串，则�一"
+"个\n"
+"    SIGNAL_SPEC 信�会被 shell 和它�动的命令忽略。\n"
+"    \n"
+"    如果一个 SIGNAL_SPEC 信�是 EXIT (0) ，则 ARG 命令会在 shell 退出时被\n"
+"    执行。如果一个 SIGNAL_SPEC 信�是 DEBUG，则 ARG命令会在�一个简�命\n"
+"    令之�执行。\n"
+"    \n"
+"    如果��供�数，trap 打�列表显示�一个与�一个信�相关�的命令。\n"
+"    \n"
+"    选项：\n"
+"      -l\t打�一个信��称和它们对应的编�的列表\n"
+"      -p\t打�与�个 SIGNAL_SPEC 信�相关�的陷阱命令\n"
+"    \n"
+"    �一个 SIGNAL_SPEC 信��以是 <signal.h> 中的信��称或者信�编�。\n"
+"    信��称大�写�感且�以使用 SIG �缀。信��用 \"kill -信� $$\"\n"
+"    ��给 shell。\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功，除�使用了无效的选项或者 SIGSPEC。"
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"显示命令类型的信�。\n"
+"    \n"
+"    对于�一个 NAME �称，指示如果作为命令它将如何被解释。\n"
+"    \n"
+"    选项：\n"
+"      -a\t显示所有包��称为 NAME 的�执行文件的�置；\n"
+"    \t\t包括别��内建和函数。仅当 `-p' 选项没有使用时\n"
+"      -f\t抑制 shell 函数查询\n"
+"      -P\t为�个 NAME �称惊醒 PATH 路径�索，�使它是别��\n"
+"    \t\t内建或函数，并且返回将被执行的�盘上文件的�称。\n"
+"      -p\t返回将被执行的�盘上文件的�称，或者当 `type -t NAME'\n"
+"    \t�返回 `file' 时，�返回任何值。\n"
+"      -t\t返回下列�中的任何一个 `alias'�`keyword'�\n"
+"    \t`function'�`builtin'�`file' 或者 `'，相应地如果 NAME 是\n"
+"    \t一个别��shell �留字�shell 函数�shell 内建�\n"
+"    \t�盘文件或没有找到。\n"
+"    \n"
+"    �数：\n"
+"      NAME\t将�解�的命令。\n"
+"    \n"
+"    退出状�：\n"
+"    如果所有的 NAME 命令都找到则返回�功；任何一个找�到则失败。"
+
+#: builtins.c:1431
+#, fuzzy
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"修改 shell 资��制。\n"
+"    \n"
+"    在�许此类控制的系统上，�供对于 shell �其创建的进程所�用的\n"
+"    资�的控制。\n"
+"    \n"
+"    选项：\n"
+"      -S\t使用软 (`soft') 资��制\n"
+"      -H\t使用硬 (`hard') 资��制\n"
+"      -a\t所有当��制都被报告\n"
+"      -b\t套接字缓存尺寸\n"
+"      -c\t创建的核文件的最大尺寸\n"
+"      -d\t一个进程的数�区的最大尺寸\n"
+"      -e\t最高的调度优先级 (`nice')\n"
+"      -f\t有 shell �其�进程�以写的最大文件尺寸\n"
+"      -i\t最多的�以挂起的信�数\n"
+"      -k\t分�给此进程的最大 kqueue 数�\n"
+"      -l\t一个进程�以�定的最大内存尺寸\n"
+"      -m\t最大的内存进驻尺寸\n"
+"      -n\t最多的打开的文件�述符个数\n"
+"      -p\t管�缓冲区尺寸\n"
+"      -q\tPOSIX 信�队列的最大字节数\n"
+"      -r\t实时调度的最大优先级\n"
+"      -s\t最大栈尺寸\n"
+"      -t\t最大的CPU时间，以秒为��\n"
+"      -u\t最大用户进程数\n"
+"      -v\t虚拟内存尺寸\n"
+"      -x\t最大的文件�数�\n"
+"      -P\t最大伪终端数�\n"
+"      -T\t最大线程数�\n"
+"    \n"
+"    并�所有选项在所有系统上�用。\n"
+"    \n"
+"    如果�供了 LIMIT ��，则它为指定资�的新的值；特别的 LIMIT 值为\n"
+"    `soft'�`hard'和`unlimited'，分别表示当�的软�制，硬�制和无�制。\n"
+"    �则打�指定资�的当��制值，�带选项则�定为 -f\n"
+"    \n"
+"    �值都是 1024 字节为��，除了 -t 以秒为��，-p 以 512 字节递增，\n"
+"    -u 为无范围的进程数�。\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功，除�使用了无效的选项或者错误�生。"
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"显示或设定文件模�掩�。\n"
+"    \n"
+"    设定用户文件创建掩�为 MODE 模�。如果�略了 MODE，则\n"
+"    打�当�掩�的值。\n"
+"    \n"
+"    如果 MODE 模�以数字开头，则被当作八进制数解�；�则是一个\n"
+"    chmod(1) �接收的符�模�串。\n"
+"    \n"
+"    选项：\n"
+"      -p\t如果�略 MODE 模�，以��用为输入的格�输入\n"
+"      -S\t以符�形�输出，�则以八进制数格�输出\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功，除�使用了无效的 MODE 模�或者选项。"
+
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"等待任务完�并返回退出状�。\n"
+"    \n"
+"    等待以 ID 编�识别的进程，其中 ID �以是进程编�或者任务声明，\n"
+"    并报告它的终止状�。如果 ID 没有给出，则等待所有的当�活跃�\n"
+"    进程，并且返回状�为零。如果 ID 是任务声明，等待任务管�中的\n"
+"    所有进程。\n"
+"    \n"
+"    若给定了 -n 选项，等待下一个任务完�并返回其状�。\n"
+"    \n"
+"    若给定了 -f 选项，且已�用了任务控制，则等待指定的 ID 终止\n"
+"    而�等待它改�状�。\n"
+"    退出状�：\n"
+"    返回最�一个 ID 进程的状�；如果使用了无效的 ID 或者选项则失败。"
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"等待进程完�并且返回退出状�。\n"
+"    \n"
+"    等待指定进程并报告它的终止状�。如果没有�供 PID，则当�所有的活跃\n"
+"    �进程都会被等待，并且返回�为零。PID 必须为进程�。\n"
+"    \n"
+"    退出状�：\n"
+"    返回进程 ID 的状�；如果 PID 是无效的进程�或者指定了无效的选项则失败。"
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"为列表中的�个�员执行命令。\n"
+"    \n"
+"    “for�循环为列表中的�个�员执行一系列的命令。如果没有\n"
+"    “in <�语> ...;�则�定使用“in \"$@\"�。对于 <�语> 中的�\n"
+"     个元素，<�称> ��被设定为该元素�执行 <命令>。\n"
+"    \n"
+"    退出状�：\n"
+"    返回最�执行的命令的状�。"
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"算术 for 循环。\n"
+"    \n"
+"    等价于\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\t命令们\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1�EXP2 和 EXP3 都是算术表达�。如果�略任何表达�，\n"
+"    则等�于使用了估值为1的表达�。\n"
+"    \n"
+"    退出状�：\n"
+"    返回最�执行的命令的状�。"
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"从列表中选��并且执行命令。\n"
+"    \n"
+"    <�语...> 被展开，生�一个�的列表。展开的�集�被打�\n"
+"    在标准错误输出设备上，�个以一个数字��缀。如果没有 `in WORDS'\n"
+"    则�定使用`in \"$@\"'。PS3�示符会被显示并且从标准输入读入一行\n"
+"    如果该行由被显示的�对应的数字组�，则 NAME ��被设定为相应\n"
+"    的�。如果行为空，则 WORDS ��和�示符被�新显示。如果读�了\n"
+"    文件结�符，则命令完�。读入任何其他的值会导致 NAME ��被设定\n"
+"    为空。读入的行被存放在�� REPLY 中。COMMANDS 命令在�次选择\n"
+"    之�执行直到执行一个 break 命令。\n"
+"    \n"
+"    退出状�：\n"
+"    返回最�一个执行的命令的状�。"
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"报告管�执行的消耗时间。\n"
+"    \n"
+"    执行 PIPELINE 并且打� PIPELINE 终结时实际时间�用户 CPU 时间和系统\n"
+"    CPU 时间的总结。\n"
+"    \n"
+"    选项：\n"
+"      -p\t用��移的 POSIX 格�打�用时总结。\n"
+"    \n"
+"    TIMEFORMAT ��的值被作为输出格�。\n"
+"    \n"
+"    退出状�：\n"
+"    返回状��PIPELINE 的返回状�。"
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"基于模�匹��执行命令。\n"
+"    \n"
+"    基于 PATTERN 模�匹�的� WORD，有选择的执行 COMMANDS 命令。\n"
+"    `|' 用于分隔多个模�。\n"
+"    \n"
+"    退出状�：\n"
+"    返回最�一个执行的命令的状�。"
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"根��件执行命令。\n"
+"    \n"
+"    `if COMMANDS'列表被执行。如果退出状�为零，则执行`then COMMANDS' \n"
+"    列表。�则按顺�执行�个 `elif COMMANDS'列表，并且如果它的退出状�为\n"
+"    零，则执行对应的 `then COMMANDS' 列表并且 if 命令终止。�则如果存在的\n"
+"    情况下，执行 `else COMMANDS'列表。整个结构的退出状�是最�一个执行\n"
+"    的命令的状�，或者如果没有�件测试为真的�，为零。\n"
+"    \n"
+"    退出状�：\n"
+"    返回最�一个执行的命令的状�。"
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"��测试�功�执行命令。\n"
+"    \n"
+"    ��在 `while' COMMANDS 中的最终命令返回结果为0，则\n"
+"    展开并执行 COMMANDS 命令。\n"
+"    \n"
+"    退出状�：\n"
+"    返回最�一个执行的命令的状�。"
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"当测试��过时执行命令。\n"
+"    \n"
+"    `until' COMMANDS 命令的最终命令返回状��为 0 时，\n"
+"    展开并执行 COMMANDS 命令。\n"
+"    \n"
+"    退出状�：\n"
+"    返回最�一个执行的命令的状�。"
+
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"创建一个以 NAME 为�的副进程。\n"
+"    \n"
+"    异步执行 COMMANDS 命令，在执行 shell 中的数组�� NAME\n"
+"    的 0 �和 1 �元素作为文件�述符，以一个管�连接命令\n"
+"    分别作为命令的标准输出和输入设备。\n"
+"    默认的 NAME 是 \"COPROC\"。\n"
+"    \n"
+"    退出状�：\n"
+"    副进程会返回退出状� 0。"
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"定义 shell 函数。\n"
+"    \n"
+"    创建一个以 NAME 为�的 shell 函数。当作为一个简�的命令�用时，\n"
+"    NAME 函数执行调用 shell 的上下文中的 COMMANDs 命令。当 NAME\n"
+"    被�用时，�数作为 $1...$n 被传递给函数，函数的�字储存在��\n"
+"    $FUNCNAME 中。\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功除� NAME 为�读。"
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"将命令组�为一个�元。\n"
+"    \n"
+"    �行组中的命令集�。这是对整个命令集�\n"
+"    ��定�的方法之一。\n"
+"    \n"
+"    退出状�：\n"
+"    返回最�一个执行的命令的状�。"
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"在��继续任务\n"
+"    \n"
+"    对于 JOB_SPEC �数�说和 `fg' 命令等�。继续一个\n"
+"    �止的或者��任务。JOB_SPEC �以指定一个任务\n"
+"    �字或任务�。在 JOB_SPEC �加上一个 `&' 将会把\n"
+"    任务放至��，就�任务声明被作为 `bg' 命令的�数\n"
+"    执行一样。\n"
+"    \n"
+"    退出状�：\n"
+"    返回被继续的任务的状�。"
+
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"估值算术表达�。\n"
+"    \n"
+"    表达�按照算术法则进行估值。\n"
+"    等价于 \"let 表达�\".\n"
+"    \n"
+"    退出状�\n"
+"    如果表达�估值为0则返回 1；�则返回0。"
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"执行�件命令。\n"
+"    \n"
+"    根��件表达� EXPRESSION 的估值返回状�0或1。表达�按照\n"
+"    `test' 内建的相��件组�，或者�以有下列�作符连接而�：\n"
+"    \n"
+"      ( EXPRESSION )\t返回 EXPRESSION 表达�的值\n"
+"      ! EXPRESSION\t\t如果 EXPRESSION表达�为�则为真，�则为�\n"
+"      EXPR1 && EXPR2\t如果 EXPR1 和 EXPR2 表达��为真则为真，�则为�\n"
+"      EXPR1 || EXPR2\t如果 EXPR1 和 EXPR2 表达�中有一个为真则为真，�则为"
+"�\n"
+"    \n"
+"    当使用 `==' 和 `!=' �作符时，�作符�边的字符串被用作模�并且执行一个\n"
+"    匹�。当使用 `=~' �作符时，�作符�边的字符串被当作正则表达��进行\n"
+"    匹�。\n"
+"    \n"
+"    �作符 && 和 || 将�对 EXPR2 表达�进行估值，如果 EXPR1 表达�足够确定\n"
+"    整个表达�的值。\n"
+"    \n"
+"    退出状�：\n"
+"    根� EXPRESSION 的值为0或1。"
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"常用 shell ���称和使用。\n"
+"    \n"
+"    BASH_VERSION\t当� Bash 的版本信�。\n"
+"    CDPATH\t用于 `cd' 命令�数�索的分�分隔的目录列表\n"
+"    GLOBIGNORE\t路径扩展时忽略的文件�匹�模�列表，\n"
+"    \t\t以分�分隔。\n"
+"    HISTFILE\t您的命令历�存放的文件�称。\n"
+"    HISTFILESIZE\t历�文件最多�以�存的行数。\n"
+"    HISTSIZE\t一个�行的 shell 最多�以访问的历�命令行数。\n"
+"    HOME\t您的登录目录的完整路径。\n"
+"    HOSTNAME\t当�主机的主机�。\n"
+"    HOSTTYPE\t当�版本的 BASH 在其之上�行的 CPU 类型。\n"
+"    IGNOREEOF\t控制 shell 收到文件结�符作为�一输入�的\n"
+"    \t\t动作。如果设定这个��，则它的值是 shell 退出之�在\n"
+"    \t\t一个空行上�以连续看到的文件结�符数�(默认为10)。\n"
+"    \t\t未设定时，文件结�符标志�输入的结�。\n"
+"    MACHTYPE\t�述当��行 Bash 的系统的字符串。\n"
+"    MAILCHECK\tBash 检测新邮件的频率，以秒为��。\n"
+"    MAILPATH\tBash 从中检测新邮件的文件列表，以分�分隔。\n"
+"    OSTYPE\t�行 Bash 的 Unix 版本。\n"
+"    PATH\t当寻找命令时�索的目录列表，以冒�分隔。\n"
+"    PROMPT_COMMAND\t打��一个主�示符之�执行的命\n"
+"    \t\t令。\n"
+"    PS1\t\t主�示符字符串。\n"
+"    PS2\t\t从�示符字符串。\n"
+"    PWD\t\t当�目录的完整路径。\n"
+"    SHELLOPTS\t已�用的 shell 选项列表，以冒�分隔。\n"
+"    TERM\t当�终端类型的�称。\n"
+"    TIMEFORMAT\t以关键则 `time' 显示的时间统计信�的输出\n"
+"    \t\t格�。\n"
+"    auto_resume\t�空时，一个�独的命令�会首先被在当�\n"
+"    \t\t�止的任务列表中�索。如果找到则该任务被置于��。\n"
+"    \t\t如果值为 `exact' 则�味�命令�必须精确匹��止任务\n"
+"    \t\t列表中的命令。如果值为 `substring' 则�味�命令�必\n"
+"    \t\t须匹�任务的一个�字符串。任何其他的值�味�命令�\n"
+"    \t\t必须是�止任务的一个�缀。\n"
+"    histchars\t控制历�展开和快速替�的字符。第一个字符是\n"
+"    \t\t历�替�字符，通常是 `!'。第二个字符是快速替�字符，\n"
+"    \t\t通常是 `^'。第三个是历�注释字符，通常是 `#'。\n"
+"    HISTIGNORE\t用于决定哪些命令被存入历�文件的模�\n"
+"    \t\t列表，以冒�分隔。\n"
+
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"将目录添加到栈中。\n"
+"    \n"
+"    将目录添加到目录栈顶，或�旋转栈直到当�工作目录�为\n"
+"    新的栈顶。�带�数时，交�栈顶的两个目录。\n"
+"    \n"
+"    选项：\n"
+"      -n\t抑制添加目录至栈时通常的改�目录�作，从而仅对栈\n"
+"    \t进行�作。\n"
+"    \n"
+"    �数：\n"
+"      +N\t旋转栈从而第 N 个目录 (`dirs' 显示的列表中左起，从零开始)\n"
+"    \t将移动到栈顶。\n"
+"    \n"
+"      -N\t旋转栈从而第 N 个目录 (`dirs' 显示的列表中�起，从零开始)\n"
+"    \t将移动到栈顶。\n"
+"    \n"
+"      dir\t将 DIR 目录添加到栈顶，并且使其�为当�工作目录。\n"
+"    \n"
+"    `dirs' 内建显示目录栈。\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功，除�使用了无效的�数或者目录转�失败。"
+
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"从栈中删除目录。\n"
+"    \n"
+"    从目录栈中删除�目。�带�数时，删除栈顶目录，并改�至新的栈\n"
+"    顶目录。\n"
+"    \n"
+"    选项：\n"
+"      -n\t抑制从栈中删除目录时通常的目录���作，从而仅对栈\n"
+"    \t进行�作。\n"
+"    \n"
+"    �数：\n"
+"      +N\t删除第 N 个目录 (`dirs' 显示的目录列表中左起，从零开始)。\n"
+"    \t例如：`popd +0' 删除第一个目录，`popd +1' 删除第二个。\n"
+"    \n"
+"      -N\t删除第 N 个目录 (`dirs' 显示的目录列表中�起，从零开始)。\n"
+"    \t例如：`popd -0' 删除最�一个目录，，`popd -1' 删除倒数第二个。\n"
+"    \n"
+"    `dirs' 内建显示目录栈。\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功，除�使用了无效的�数或者目录��失败。"
+
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"显示目录栈。\n"
+"    \n"
+"    显示当�记�的目录列表。通过 `pushd' 命令�以将目录存入列表\n"
+"    中；`popd' 命令�用于�历弹出列表。\n"
+"    \n"
+"    选项：\n"
+"      -c\t删除所有元素以清空目录栈\n"
+"      -l\t�打�与主目录相关的波浪��缀的目录\n"
+"      -p\t�行一个�目打�目录栈\n"
+"      -v\t�行一个�目，以栈中�置为�缀打�目录栈\n"
+"    \n"
+"    �数：\n"
+"      +N\t显示 dirs �带选项�动时显示的目录列表左起中第\n"
+"    \tN 个目录，从零开始。\n"
+"    \n"
+"      -N\t显示 dirs �带选项�动时显示的目录列表�起中第\n"
+"    \tN 个目录，从零开始。\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功，除�使用了无效的选项或者�生错误。"
+
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"设定和�消设定 shell 选项。\n"
+"    \n"
+"    改��个 shell 选项 OPTNAME 的设定。�带�数时，\n"
+"    列出�个�供的 OPTNAME，�则列出所有 shell 选项；\n"
+"    �时标注�一个选项是�被设定。\n"
+"    \n"
+"    选项：\n"
+"      -o\t�制 OPTNAME 为定义用于`set -o' 的选项\n"
+"      -p\t打��个 shell 选项并标注它的状�。\n"
+"      -q\t抑制输出\n"
+"      -s\t�用(设定)�个 OPTNAME 选项\n"
+"      -u\t�用(�消设定)�个 OPTNAME 选项\n"
+"    \n"
+"    退出状�：\n"
+"    如果 OPTNAME 选项被�用则返回�功；如果是\n"
+"    无效的选项或 OPTNAME 被�用则失败。"
+
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"在 FORMAT 的控制下格�化并打� ARGUMENTS �数。\n"
+"    \n"
+"    选项：\n"
+"      -v var\t将输出赋值给 shell �� VAR 而�显示在标准输出上\n"
+"    \n"
+"    FORMAT 是包�三�对象的字符串：简�地被拷�到标准输出的普通字符；\n"
+"    被��之�拷�到标准输入的转义字符；以��个都会影�到下个�数的打�的格"
+"�化声明。\n"
+"    \n"
+"    在 printf(1) 中�述的标准控制声明之外，printf 解�：\n"
+"    \n"
+"      %b\t扩展对应�数中的�斜�转义�列\n"
+"      %q\t以�作为 shell 输入的格�引用�数\n"
+"      %(fmt)T\t以 FMT 为供给 strftime(3) 的格�输出日期时间字符串\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功，除�使用了无效的选项或者写或赋值错误�生。"
+
+#: builtins.c:1971
+#, fuzzy
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"指定 Readline 如何补全�数。\n"
+"    \n"
+"    声明对于�一个 NAME �称如何补全�数。如果�带选项，\n"
+"    现有的补全声明会以�以�用为输入的格�打�出�。\n"
+"    \n"
+"    选项：\n"
+"      -p\t以��用的格�打�现有的补全声明。\n"
+"      -r\t对于�个 NAME �称删除补全声明，或者如果没有�供 NAME\n"
+"    \t�称，删除所有的补全声明。\n"
+"      -D\t对于没有补全声明定义的命令，设定默认的补全动作\n"
+"      -E\t对于 \"empty\" 命令设定补全动作，—— 对于空行的补全。\n"
+"      -I\t将补全和动作应用在首��（通常是所给命令）上\n"
+"    \n"
+"    �试补全时，按照上述大写字�选项的顺�进行动作。\n"
+"    如果给出了多个选项，-D 选项优先级高于 -E 选项，且\n"
+"    这两个选项优先级�高于 -I。\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功，除�使用了无效的选项或者错误�生。"
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"��选项显示�能的补全。\n"
+"    \n"
+"    �图在能产生�能的补全的 shell 函数内部使用。\n"
+"    如果�供了�选的 WORD �数，则产生按照 WORD\n"
+"    进行的匹�。\n"
+"    \n"
+"    退出状�：\n"
+"    除�使用了无效选项或者错误�生，�则返回�功。"
+
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"修改或显示补全选项。\n"
+"    \n"
+"    修改�个 NAME �称的补全选项，或如果没有�供 NAME �称，执行当�的补"
+"全。\n"
+"    如果�带选项，打��个 NAME �称的补全选项或当�的补全声明。\n"
+"    \n"
+"    选项：\n"
+"    \t-o option\t为�个 NAME �称设定补全选项 option\n"
+"    \t-D\t\t为 \"default\" 命令补全改�选项\n"
+"    \t-E\t\t为 \"empty\" 命令补全改�选项\n"
+"    \t-I\t\t为首��的补全改�选项\n"
+"    \n"
+"    使用 `+o' 而�是 `-o' �以关闭指定的选项。\n"
+"    \n"
+"    �数：\n"
+"    \n"
+"    �个 NAME �称都对应一个之�以通过 `complete' 内建定义了的补全声明的\n"
+"    命令。如果��供 NAME �称，当�生�补全的函数必须调用 compopt，\n"
+"    并且当�执行的补全生�器选项会被修改。\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功，除�使用了无效的选项或者 NAME �称没有定义补全声明。"
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"从标准输入读�行到下标数组��中。\n"
+"    \n"
+"    从标准输入读�行到下标数组�� ARRAY 中，或者如果使用了 -u 选项，\n"
+"    从文件�述符 FD 中读�。MAPFILE ��是默认的 ARRAY ��。\n"
+"    \n"
+"    选项：\n"
+"      -d delim\t使用 DELIM 而��行符断行\n"
+"      -n count\t最多拷� COUNT 行，如果 COUNT 为 0，则拷�所有行。\n"
+"      -O origin\t从下标 ORIGIN 开始 赋值给 ARRAY ��。默认下标是0.\n"
+"      -s count \t丢弃最先读�的 COUNT 行。\n"
+"      -t\t\t从读�的�行末尾删除一个�行符。\n"
+"      -u fd\t\t从文件�述符 FD 中读�行而�是标准输入。\n"
+"      -C callback\t� QUANTUM 次读行之�对 CALLBACK 回调进行估值。\n"
+"      -c quantum\t定义�次调用 CALLBACK 回调之间读�的行数。\n"
+"    \n"
+"    �数：\n"
+"      ARRAY\t\t存储数�使用的数组��\n"
+"    \n"
+"    如果使用了 -C 而没有 -c，默认的��是5000。当对 CALLBACK 估值时，\n"
+"    下一个将被赋值的数组元素的下标作为�外�数被传递。\n"
+"    \n"
+"    如果没有显�指定起始下标，mapfile 将在赋值�清空 ARRAY ��。\n"
+"    \n"
+"    退出状�：\n"
+"    返回�功，除�使用了无效的选项，或者 ARRAY ���读或�是下标数组。"
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"从一个文件中读�行到数组��中。\n"
+"    \n"
+"    一个 `mapfile'的�义�。"
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "返回当��例程调用的上下文\n"
+#~ "    \n"
+#~ "    �带 EXPR 时，返回 "
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process: 进程 %5ld(%s) 进入 the_pipeline"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "未知信� #"
+
+#  Inc. 的 . 是个缩写
+#~ msgid "Copyright (C) 2018 Free Software Foundation, Inc."
+#~ msgstr "版�所有 (C) 2018 自由软件基金会"
+
+#~ msgid "Copyright (C) 2014 Free Software Foundation, Inc."
+#~ msgstr "版�所有 (C) 2014 自由软件基金会."
+
+#~ msgid "Copyright (C) 2009 Free Software Foundation, Inc.\n"
+#~ msgstr "版�所有 (C) 2009 自由软件基金会\n"
+
+#~ msgid ""
+#~ "License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl."
+#~ "html>\n"
+#~ msgstr ""
+#~ "许�� GPLv2+: GNU GPL 许��第二版或者更新版本 <http://gnu.org/licenses/"
+#~ "gpl.html>\n"
+
+#~ msgid ""
+#~ ".  With EXPR, returns\n"
+#~ "    "
+#~ msgstr ""
+#~ ".  带有 EXPR 时， 返回\n"
+#~ "    "
+
+#~ msgid ""
+#~ "; this extra information can be used to\n"
+#~ "    provide a stack trace.\n"
+#~ "    \n"
+#~ "    The value of EXPR indicates how many call frames to go back before "
+#~ "the\n"
+#~ "    current one; the top frame is frame 0."
+#~ msgstr ""
+#~ "; 这个�外信��被用于\n"
+#~ "    �供栈追踪.\n"
+#~ "    \n"
+#~ "    EXPR 的值显示了回到当�调用帧之�\n"
+#~ "    的调用帧书目; 栈顶帧是第0帧."
diff --git a/po/zh_TW.gmo b/po/zh_TW.gmo
new file mode 100644
index 0000000..f566ab3
--- /dev/null
+++ b/po/zh_TW.gmo
diff --git a/po/zh_TW.po b/po/zh_TW.po
new file mode 100644
index 0000000..457e876
--- /dev/null
+++ b/po/zh_TW.po
@@ -0,0 +1,5648 @@
+# Traditional Chinese translations for bash package.
+# Copyright (C) 2019 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+#
+# Zi-You Dai <ioppooster@gmail.com>, 2008.
+# Mingye Wang (Arthur2e5) <arthur200126@hotmail.com>, 2015.
+# Wei-Lun Chao <bluebat@member.fsf.org>, 2015.
+# pan93412 <pan93412@gmail.com>, 2018, 2019.
+msgid ""
+msgstr ""
+"Project-Id-Version: bash 5.0\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-11-28 12:51-0500\n"
+"PO-Revision-Date: 2020-01-19 00:50+0800\n"
+"Last-Translator: pan93412 <pan93412@gmail.com>\n"
+"Language-Team: Chinese (traditional) <zh-l10n@lists.linux.org.tw>\n"
+"Language: zh_TW\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"X-Generator: Lokalize 19.04.3\n"
+
+#: arrayfunc.c:66
+msgid "bad array subscript"
+msgstr "陣列下標�正確"
+
+#: arrayfunc.c:421 builtins/declare.def:638 variables.c:2274 variables.c:2300
+#: variables.c:3133
+#, c-format
+msgid "%s: removing nameref attribute"
+msgstr "%s：正在移除 nameref 屬性"
+
+#: arrayfunc.c:446 builtins/declare.def:851
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr "%s: 無法將索引陣列轉化為關�陣列"
+
+#: arrayfunc.c:700
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr "%s: 無效的關�陣列�值"
+
+#: arrayfunc.c:702
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr "%s: 無法指派為�數字的索引"
+
+#: arrayfunc.c:747
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr "%s: %s: 指派為關�陣列時必須使用下標"
+
+#: bashhist.c:452
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: 無法建立: %s"
+
+#: bashline.c:4310
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr "bash_execute_unix_command: 無法為指令找到按�映射"
+
+#: bashline.c:4459
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: 第一個�空字元�是「\"�"
+
+#: bashline.c:4488
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr "%2$s 中沒有閉�的「%1$c�"
+
+#: bashline.c:4519
+#, c-format
+msgid "%s: missing colon separator"
+msgstr "%s: 缺少冒號分隔符"
+
+#: bashline.c:4555
+#, fuzzy, c-format
+msgid "`%s': cannot unbind in command keymap"
+msgstr "「%s�: 無法解除�定"
+
+#: braces.c:327
+#, c-format
+msgid "brace expansion: cannot allocate memory for %s"
+msgstr "大括號展開：無法為 %s 分�記憶體"
+
+#: braces.c:406
+#, c-format
+msgid "brace expansion: failed to allocate memory for %u elements"
+msgstr "大括號展開：為 %u 個元素分�記憶體失敗"
+
+#: braces.c:451
+#, c-format
+msgid "brace expansion: failed to allocate memory for `%s'"
+msgstr "大括號展開：為「%s�分�記憶體失敗"
+
+#: builtins/alias.def:131 variables.c:1844
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "「%s�: 無效的別�"
+
+#: builtins/bind.def:122 builtins/bind.def:125
+msgid "line editing not enabled"
+msgstr "未啟用列編輯"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "「%s�: 無效的按�映射�"
+
+#: builtins/bind.def:252
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s：�能讀�：%s"
+
+#: builtins/bind.def:328 builtins/bind.def:358
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "「%s�：�明函數�稱"
+
+#: builtins/bind.def:336
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s 未與任何按��定。\n"
+
+#: builtins/bind.def:340
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s �以被呼�，藉由"
+
+#: builtins/bind.def:378 builtins/bind.def:395
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "「%s�: 無法解除�定"
+
+#: builtins/break.def:77 builtins/break.def:119
+msgid "loop count"
+msgstr "迴圈計數"
+
+#: builtins/break.def:139
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "僅在「for�，「while�， 或者「until�迴圈中有�義"
+
+#: builtins/caller.def:136
+#, fuzzy
+msgid ""
+"Returns the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0."
+msgstr ""
+"回傳目��呼�的語境。\n"
+"    \n"
+"    �帶有 EXPR 時，回傳「$line $filename�。帶有 EXPR 時，回傳\n"
+"   「$line $subroutine $filename�；這個�外的資訊�以被用於�供\n"
+"    堆疊追蹤。\n"
+"    \n"
+"    EXPR 的值顯示了到目�呼�框格需�回去多少個呼�框格；頂部框格\n"
+"    是第 0 框格。\n"
+"    \n"
+"    退出狀態：\n"
+"    除� shell �在執行一個 shell 函數或者 EXPR 無效，�則回傳�\n"
+"    果為 0。"
+
+#: builtins/cd.def:327
+msgid "HOME not set"
+msgstr "未設定 HOME"
+
+#: builtins/cd.def:335 builtins/common.c:161 test.c:901
+msgid "too many arguments"
+msgstr "太多�數"
+
+#: builtins/cd.def:342
+msgid "null directory"
+msgstr "空的目錄"
+
+#: builtins/cd.def:353
+msgid "OLDPWD not set"
+msgstr "未設定 OLDPWD"
+
+#: builtins/common.c:96
+#, c-format
+msgid "line %d: "
+msgstr "第 %d 列："
+
+#: builtins/common.c:134 error.c:264
+#, c-format
+msgid "warning: "
+msgstr "警告："
+
+#: builtins/common.c:148
+#, c-format
+msgid "%s: usage: "
+msgstr "%s：用法："
+
+#: builtins/common.c:193 shell.c:516 shell.c:844
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s：�項需�一個�數"
+
+#: builtins/common.c:200
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s：需�數字�數"
+
+#: builtins/common.c:207
+#, c-format
+msgid "%s: not found"
+msgstr "%s：沒有找到"
+
+#: builtins/common.c:216 shell.c:857
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s：無效�項"
+
+#: builtins/common.c:223
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s：無效�項�稱"
+
+#: builtins/common.c:230 execute_cmd.c:2373 general.c:368 general.c:373
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr "「%s�：�是一個有效的識別符"
+
+#: builtins/common.c:240
+msgid "invalid octal number"
+msgstr "無效的八進�數字"
+
+#: builtins/common.c:242
+msgid "invalid hex number"
+msgstr "無效的�六進�數字"
+
+#: builtins/common.c:244 expr.c:1569
+msgid "invalid number"
+msgstr "無效數字"
+
+#: builtins/common.c:252
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s：無效的訊號�格"
+
+#: builtins/common.c:259
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "「%s�：�是一個 pid 或有效的工作�格"
+
+#: builtins/common.c:266 error.c:510
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s：唯讀的變數"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s：%s 超出範�"
+
+#: builtins/common.c:274 builtins/common.c:276
+msgid "argument"
+msgstr "�數"
+
+#: builtins/common.c:276
+#, c-format
+msgid "%s out of range"
+msgstr "%s 超出範�"
+
+#: builtins/common.c:284
+#, c-format
+msgid "%s: no such job"
+msgstr "%s：沒有此類工作"
+
+#: builtins/common.c:292
+#, c-format
+msgid "%s: no job control"
+msgstr "%s：沒有工作控制"
+
+#: builtins/common.c:294
+msgid "no job control"
+msgstr "沒有工作控制"
+
+#: builtins/common.c:304
+#, c-format
+msgid "%s: restricted"
+msgstr "%s：��的"
+
+#: builtins/common.c:306
+msgid "restricted"
+msgstr "��的"
+
+#: builtins/common.c:314
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr "%s：�是一個內建 shell"
+
+#: builtins/common.c:323
+#, c-format
+msgid "write error: %s"
+msgstr "寫入時發生錯誤：%s"
+
+#: builtins/common.c:331
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr "設定終端屬性時發生錯誤: %s"
+
+#: builtins/common.c:333
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr "�得終端屬性時發生錯誤: %s"
+
+#: builtins/common.c:635
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr "%s：檢索目�目錄時發生錯誤：%s：%s\n"
+
+#: builtins/common.c:701 builtins/common.c:703
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s：模稜兩�的工作�格"
+
+#: builtins/common.c:964
+msgid "help not available in this version"
+msgstr "這個版本沒有�用的說明"
+
+#: builtins/common.c:1008 builtins/set.def:953 variables.c:3839
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: 無法�消設定: 唯讀 %s"
+
+#: builtins/common.c:1013 builtins/set.def:932 variables.c:3844
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: 無法�消設定"
+
+#: builtins/complete.def:287
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s：無效的功能�稱"
+
+#: builtins/complete.def:486 builtins/complete.def:634
+#: builtins/complete.def:865
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s：沒有完�的�格"
+
+#: builtins/complete.def:688
+msgid "warning: -F option may not work as you expect"
+msgstr "警告：-F �項�能無法按�期工作"
+
+#: builtins/complete.def:690
+msgid "warning: -C option may not work as you expect"
+msgstr "警告：-C �項�能無法按�期工作"
+
+#: builtins/complete.def:838
+msgid "not currently executing completion function"
+msgstr "目�未執行補完功能"
+
+#: builtins/declare.def:134
+msgid "can only be used in a function"
+msgstr "�能用在函數中"
+
+#: builtins/declare.def:363 builtins/declare.def:756
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr "%s: 引用變數�能為陣列"
+
+#: builtins/declare.def:374 variables.c:3385
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr "%s: ��許�稱引用變數引用自身"
+
+#: builtins/declare.def:379 variables.c:2104 variables.c:3304 variables.c:3312
+#: variables.c:3382
+#, c-format
+msgid "%s: circular name reference"
+msgstr "%s: 迴圈變數�引用"
+
+#: builtins/declare.def:384 builtins/declare.def:762 builtins/declare.def:773
+#, c-format
+msgid "`%s': invalid variable name for name reference"
+msgstr "「%s�：無效的引用變數�"
+
+#: builtins/declare.def:514
+msgid "cannot use `-f' to make functions"
+msgstr "無法用「-f�產生函數"
+
+#: builtins/declare.def:526 execute_cmd.c:5986
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s：唯讀函數"
+
+#: builtins/declare.def:824
+#, c-format
+msgid "%s: quoted compound array assignment deprecated"
+msgstr "%s：�建議使用引用的複�陣列指定"
+
+#: builtins/declare.def:838
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr "%s: 無法以這種方�銷毀陣列變數"
+
+#: builtins/declare.def:845 builtins/read.def:815
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr "%s: 無法將關�陣列轉化為索引陣列"
+
+#: builtins/enable.def:143 builtins/enable.def:151
+msgid "dynamic loading not available"
+msgstr "動態載入��用"
+
+#: builtins/enable.def:343
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "無法開啟共享物件 %s: %s"
+
+#: builtins/enable.def:371
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "無法在共享物件 %2$s 中找到 %1$s: %3$s"
+
+#: builtins/enable.def:388
+#, fuzzy, c-format
+msgid "%s: dynamic builtin already loaded"
+msgstr "%s: 未以動態方�載入"
+
+#: builtins/enable.def:392
+#, c-format
+msgid "load function for %s returns failure (%d): not loaded"
+msgstr "為 %s 載入函�時回傳錯誤 (%d)：尚未載入"
+
+#: builtins/enable.def:517
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: 未以動態方�載入"
+
+#: builtins/enable.def:543
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: 無法刪除: %s"
+
+#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5818
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: 是一個目錄"
+
+#: builtins/evalfile.c:144
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: �是一般檔案"
+
+#: builtins/evalfile.c:153
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: 檔案太大"
+
+#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1647
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: 無法執行二進�檔案"
+
+#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: 無法執行: %s"
+
+#: builtins/exit.def:64
+#, c-format
+msgid "logout\n"
+msgstr "登出\n"
+
+#: builtins/exit.def:89
+msgid "not login shell: use `exit'"
+msgstr "�是登入 shell: 使用「exit�"
+
+#: builtins/exit.def:121
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "有�止的工作。\n"
+
+#: builtins/exit.def:123
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "有執行中的工作。\n"
+
+#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417
+msgid "no command found"
+msgstr "未找到指令"
+
+#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407
+#: builtins/fc.def:412
+msgid "history specification"
+msgstr "歷�記錄�格"
+
+#: builtins/fc.def:444
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: 無法開啟暫存檔案: %s"
+
+#: builtins/fg_bg.def:152 builtins/jobs.def:284
+msgid "current"
+msgstr "目�"
+
+#: builtins/fg_bg.def:161
+#, c-format
+msgid "job %d started without job control"
+msgstr "在�帶工作控制的情�下啟動了工作 %d"
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s：��法的�項 ─ %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: �項需�一個�數 -- %c\n"
+
+#: builtins/hash.def:91
+msgid "hashing disabled"
+msgstr "已�用雜湊"
+
+#: builtins/hash.def:139
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr "%s: 雜湊表為空\n"
+
+#: builtins/hash.def:267
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "命中\t指令\n"
+
+#: builtins/help.def:133
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Shell 指令，符�關�字 `"
+
+#: builtins/help.def:135
+msgid ""
+"'\n"
+"\n"
+msgstr ""
+
+#: builtins/help.def:185
+#, c-format
+msgid ""
+"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
+msgstr ""
+"沒有與「%s�符�的說明主題。嘗試「help help�或「man -k %s�或「info %s�。"
+
+#: builtins/help.def:224
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: 無法開啟: %s"
+
+#: builtins/help.def:524
+#, c-format
+msgid ""
+"These shell commands are defined internally.  Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+"這些 shell 指令是內部定義的。請輸入「help�以�得一個列表。\n"
+"輸入「help �稱�以得到有關函數「�稱�的更多資訊。\n"
+"使用「info bash�來�得關於 shell 的更多一般性資訊。\n"
+"使用「man -k�或「info�來�得�在列表中指令的更多資訊。\n"
+"\n"
+"�稱�邊的星號(*)表示該指令被�用。\n"
+"\n"
+
+#: builtins/history.def:155
+msgid "cannot use more than one of -anrw"
+msgstr "最多能使用 -anrw �項之一"
+
+#: builtins/history.def:188 builtins/history.def:198 builtins/history.def:213
+#: builtins/history.def:230 builtins/history.def:242 builtins/history.def:249
+msgid "history position"
+msgstr "歷�記錄�置"
+
+#: builtins/history.def:340
+#, c-format
+msgid "%s: invalid timestamp"
+msgstr "%s：無效時間戳"
+
+#: builtins/history.def:451
+#, c-format
+msgid "%s: history expansion failed"
+msgstr "%s: 歷�記錄擴充套件失敗"
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: inlib 失敗"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "其他�項�能與「-x��時使用"
+
+#: builtins/kill.def:211
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: �數必須是行程或工作 ID"
+
+#: builtins/kill.def:274
+msgid "Unknown error"
+msgstr "未知錯誤"
+
+#: builtins/let.def:97 builtins/let.def:122 expr.c:639 expr.c:657
+msgid "expression expected"
+msgstr "需�表示�"
+
+#: builtins/mapfile.def:178
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: �是一個索引陣列"
+
+#: builtins/mapfile.def:271 builtins/read.def:308
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: 無效的檔案�述符�格"
+
+#: builtins/mapfile.def:279 builtins/read.def:315
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: 無效的檔案�述符: %s"
+
+#: builtins/mapfile.def:288 builtins/mapfile.def:326
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: 無效的列數"
+
+#: builtins/mapfile.def:299
+#, c-format
+msgid "%s: invalid array origin"
+msgstr "%s: 無效的陣列原點"
+
+#: builtins/mapfile.def:316
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr "%s: 無效的回呼定�"
+
+#: builtins/mapfile.def:349
+msgid "empty array variable name"
+msgstr "空陣列變數�"
+
+#: builtins/mapfile.def:370
+msgid "array variable support required"
+msgstr "需�陣列變數支�"
+
+#: builtins/printf.def:419
+#, c-format
+msgid "`%s': missing format character"
+msgstr "「%s�: 缺少格�字元"
+
+#: builtins/printf.def:474
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "「%c�: 無效的時間格��格"
+
+#: builtins/printf.def:676
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "「%c�: 無效格�字元"
+
+#: builtins/printf.def:702
+#, c-format
+msgid "warning: %s: %s"
+msgstr "警告: %s: %s"
+
+#: builtins/printf.def:788
+#, c-format
+msgid "format parsing problem: %s"
+msgstr "格�解��題: %s"
+
+#: builtins/printf.def:885
+msgid "missing hex digit for \\x"
+msgstr "使用了 \\x 但缺少�六進�數字"
+
+#: builtins/printf.def:900
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "使用了 \\%c 但缺少�國碼數字"
+
+#: builtins/pushd.def:199
+msgid "no other directory"
+msgstr "無其他目錄"
+
+#: builtins/pushd.def:360
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s: 無效�數"
+
+#: builtins/pushd.def:480
+msgid "<no current directory>"
+msgstr "<無目�目錄>"
+
+#: builtins/pushd.def:524
+msgid "directory stack empty"
+msgstr "目錄堆疊為空"
+
+#: builtins/pushd.def:526
+msgid "directory stack index"
+msgstr "目錄堆疊索引"
+
+#: builtins/pushd.def:701
+msgid ""
+"Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list shown "
+"by\n"
+"    \tdirs when invoked without options, starting with zero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list shown "
+"by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+"顯示目�記�的目錄列表。 目錄\n"
+"    藉由「pushd�指令加入這個列表；您�以\n"
+"    使用「popd�指令�列表進行�歷。\n"
+"    \n"
+"    �項:\n"
+"      -c\t刪除所有元素以清除目錄堆疊\n"
+"      -l\t��出與家目錄相關的以波浪號\n"
+"    \t為字首的目錄\n"
+"      -p\t�列一個�目�出目錄堆疊\n"
+"      -v\t以堆疊�置為字首，�列一個�目\n"
+"    \t�出目錄堆疊\n"
+"    \n"
+"    �數:\n"
+"      +N\t以 dirs �帶�項輸出的順�，從左起第 N 個�目顯示列表，\n"
+"    \t從 0 開始。\n"
+"    \n"
+"      -N\t以 dirs �帶�項輸出的順�，從�起第 N 個項目顯示列表，\n"
+"\t從 0 開始。"
+
+#: builtins/pushd.def:723
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the left of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \tfrom the right of the list shown by `dirs', starting with\n"
+"    \tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"在目錄堆疊頂部加入一個目錄，或者論詢\n"
+"    目錄堆疊，是目�工作目錄�為新的堆疊頂端\n"
+"    �帶�數時，交�堆疊頂端的兩個目錄。\n"
+"    \n"
+"    �項：\n"
+"      -n\t抑制增加堆疊中目錄時通常變更目錄的�作，\n"
+"    \t從而�有堆疊被�作。\n"
+"    \n"
+"    �數：\n"
+"      +N\t輪轉堆疊使得第 N 個目錄(「dirs�的\n"
+"    \t輸出列表中左起，從 0 開始)\n"
+"    \t�至堆疊頂端。\n"
+"    \n"
+"      -N\t輪轉堆疊使得第 N 個目錄(「dirs�的\n"
+"    \t輸出列表中�起，從 0 開始)\n"
+"    \t�至堆疊頂端\n"
+"    \n"
+"      dir\t新增目錄至堆疊頂端，並\n"
+"    \t使其�為新的目�工作目錄。\n"
+"    \n"
+"   「dirs�內建指令顯示目錄堆疊。"
+
+#: builtins/pushd.def:748
+msgid ""
+"Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack."
+msgstr ""
+"從目錄堆疊中刪除�目。�帶�數時，刪除\n"
+"    堆疊頂端目錄並變更至新的堆疊頂端目錄。\n"
+"    \n"
+"    �項：\n"
+"      -n\t抑制從堆疊中刪除目錄時通常變更目錄�作，\n"
+"    \t從而�有堆疊被�作。\n"
+"    \n"
+"    �數：\n"
+"      +N\t從「dirs�輸出的列表中，\n"
+"    \t刪除左起第 N 個�目，計數從 0 開始。例如：「popd +0�\n"
+"    \t刪除第一個目錄，「popd +1�刪除第二個。\n"
+"    \n"
+"      -N\t從「dirs�輸出的列表中，\n"
+"    \t刪除�起第 N 個�目，計數從 0 開始，例如：「popd -0�\n"
+"    \t刪除最後一個�目，「popd -1�刪除倒數第二個。\n"
+"    \n"
+"   「dirs�內建變數顯示目錄堆疊。"
+
+#: builtins/read.def:280
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr "%s: 無效的逾時�格"
+
+#: builtins/read.def:755
+#, c-format
+msgid "read error: %d: %s"
+msgstr "讀�錯誤: %d: %s"
+
+#: builtins/return.def:68
+msgid "can only `return' from a function or sourced script"
+msgstr "�能從函數或者原始指令稿「return�"
+
+#: builtins/set.def:869
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "無法�時�消設定一個函數和一個變數"
+
+#: builtins/set.def:966
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: �是陣列變數"
+
+#: builtins/setattr.def:189
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: �是函數"
+
+#: builtins/setattr.def:194
+#, c-format
+msgid "%s: cannot export"
+msgstr "%s：無法匯出"
+
+#: builtins/shift.def:72 builtins/shift.def:79
+msgid "shift count"
+msgstr "�移計數"
+
+#: builtins/shopt.def:310
+msgid "cannot set and unset shell options simultaneously"
+msgstr "無法�時設定和�消設定 shell �項"
+
+#: builtins/shopt.def:428
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: 無效的 shell �項�稱"
+
+#: builtins/source.def:128
+msgid "filename argument required"
+msgstr "需�檔��數"
+
+#: builtins/source.def:154
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: 檔案未找到"
+
+#: builtins/suspend.def:102
+msgid "cannot suspend"
+msgstr "無法暫�"
+
+#: builtins/suspend.def:112
+msgid "cannot suspend a login shell"
+msgstr "無法暫�登入 shell"
+
+#: builtins/type.def:235
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s 是「%s�的別�\n"
+
+#: builtins/type.def:256
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s 是 shell 關�字\n"
+
+#: builtins/type.def:275
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s 是一個函數\n"
+
+#: builtins/type.def:299
+#, c-format
+msgid "%s is a special shell builtin\n"
+msgstr "%s 是特別的 shell 內建物件\n"
+
+#: builtins/type.def:301
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr "%s 是 shell 內建物件\n"
+
+#: builtins/type.def:323 builtins/type.def:408
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s 是 %s\n"
+
+#: builtins/type.def:343
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr "%s 已進行雜湊�作 (%s)\n"
+
+#: builtins/ulimit.def:400
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: 無效的 limit �數"
+
+#: builtins/ulimit.def:426
+#, c-format
+msgid "`%c': bad command"
+msgstr "「%c�：�當的指令"
+
+#: builtins/ulimit.def:455
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr "%s：�能得到 limit: %s"
+
+#: builtins/ulimit.def:481
+msgid "limit"
+msgstr "limit"
+
+#: builtins/ulimit.def:493 builtins/ulimit.def:793
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s：�能修改 limit: %s"
+
+#: builtins/umask.def:115
+msgid "octal number"
+msgstr "八進�數字"
+
+#: builtins/umask.def:232
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr "「%c�: 無效的符號狀態�算�"
+
+#: builtins/umask.def:287
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr "「%c�: 無效的符號狀態字元"
+
+#: error.c:89 error.c:347 error.c:349 error.c:351
+msgid " line "
+msgstr " 列 "
+
+#: error.c:164
+#, c-format
+msgid "last command: %s\n"
+msgstr "最後的指令：%s\n"
+
+#: error.c:172
+#, c-format
+msgid "Aborting..."
+msgstr "中止…"
+
+#. TRANSLATORS: this is a prefix for informational messages.
+#: error.c:287
+#, c-format
+msgid "INFORM: "
+msgstr "通知："
+
+#: error.c:462
+msgid "unknown command error"
+msgstr "�明指令錯誤"
+
+#: error.c:463
+msgid "bad command type"
+msgstr "�當的指令類型"
+
+#: error.c:464
+msgid "bad connector"
+msgstr "�當的連接器"
+
+#: error.c:465
+msgid "bad jump"
+msgstr "錯誤的跳轉"
+
+#: error.c:503
+#, c-format
+msgid "%s: unbound variable"
+msgstr "%s: 未�定的變數"
+
+#: eval.c:242
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\a 等待輸入逾時：自動登出\n"
+
+#: execute_cmd.c:537
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "無法從 /dev/null �定�標準輸入: %s"
+
+#: execute_cmd.c:1297
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "時間格�:「%c�: 無效的格�字元"
+
+#: execute_cmd.c:2362
+#, c-format
+msgid "execute_coproc: coproc [%d:%s] still exists"
+msgstr "execute_coproc：coproc [%d:%s] �然存在"
+
+#: execute_cmd.c:2486
+msgid "pipe error"
+msgstr "管�錯誤"
+
+#: execute_cmd.c:4793
+#, c-format
+msgid "eval: maximum eval nesting level exceeded (%d)"
+msgstr "eval：超出最大 eval 巢狀層數 (%d)"
+
+#: execute_cmd.c:4805
+#, c-format
+msgid "%s: maximum source nesting level exceeded (%d)"
+msgstr "%s: 超出最大來�巢狀層數 (%d)"
+
+#: execute_cmd.c:4913
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr "%s: 超出最大函數巢狀層數 (%d)"
+
+#: execute_cmd.c:5467
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: ��的: 無法在指令�稱中使用「/�"
+
+#: execute_cmd.c:5574
+#, c-format
+msgid "%s: command not found"
+msgstr "%s：指令找�到"
+
+#: execute_cmd.c:5816
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5854
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr "%s: %s: �當的直譯器"
+
+#: execute_cmd.c:5891
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: 無法執行二進�檔案: %s"
+
+#: execute_cmd.c:5977
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "「%s�: 特殊內建"
+
+#: execute_cmd.c:6029
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "無法複製檔案�述符 %d 到檔案�述符 %d"
+
+#: expr.c:263
+msgid "expression recursion level exceeded"
+msgstr "表示��迴層次超出範�"
+
+#: expr.c:291
+msgid "recursion stack underflow"
+msgstr "�迴堆疊下�溢�"
+
+#: expr.c:477
+msgid "syntax error in expression"
+msgstr "表示�語法錯誤"
+
+#: expr.c:521
+msgid "attempted assignment to non-variable"
+msgstr "嘗試指派給�變數"
+
+#: expr.c:530
+msgid "syntax error in variable assignment"
+msgstr "變數定義語法錯誤"
+
+#: expr.c:544 expr.c:911
+msgid "division by 0"
+msgstr "除 0"
+
+#: expr.c:592
+msgid "bug: bad expassign token"
+msgstr "錯誤：�當的表示�字組"
+
+#: expr.c:646
+msgid "`:' expected for conditional expression"
+msgstr "�件表示�需�「:�"
+
+#: expr.c:972
+msgid "exponent less than 0"
+msgstr "指數�於 0"
+
+#: expr.c:1029
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr "�增符或�減符後應跟有識別符"
+
+#: expr.c:1056
+msgid "missing `)'"
+msgstr "缺少「)�"
+
+#: expr.c:1107 expr.c:1487
+msgid "syntax error: operand expected"
+msgstr "語法錯誤: 需��算元"
+
+#: expr.c:1489
+msgid "syntax error: invalid arithmetic operator"
+msgstr "語法錯誤: 無效的算術�算�"
+
+#: expr.c:1513
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (錯誤字組是「%s�)"
+
+#: expr.c:1573
+msgid "invalid arithmetic base"
+msgstr "無效的算術進�"
+
+#: expr.c:1582
+#, fuzzy
+msgid "invalid integer constant"
+msgstr "%s: 無效的列數"
+
+#: expr.c:1598
+msgid "value too great for base"
+msgstr "數值太大��為算術進�的基底"
+
+#: expr.c:1647
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: 表示�錯誤\n"
+
+#: general.c:70
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: 無法存�上層目錄"
+
+#: input.c:99 subst.c:6069
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "無法為檔案�述符 %d �設無延�模�"
+
+#: input.c:266
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr "無法為來自 fd %d 的 bash 輸入分�新的檔案�述符"
+
+#: input.c:274
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr "save_bash_input: 已經存在�供給新 fd %d 的緩��"
+
+#: jobs.c:543
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: 行程群組管�"
+
+#: jobs.c:906
+#, c-format
+msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:959
+#, c-format
+msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next"
+msgstr ""
+
+#: jobs.c:1283
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr "產生的行程識別碼 %d 顯示為執行中的工作 %d"
+
+#: jobs.c:1402
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr "刪除行程群組 %2$ld 中已�止的工作 %1$d"
+
+#: jobs.c:1511
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr "add_process: 行程識別碼 %5ld(%s) 標註為�活著"
+
+#: jobs.c:1850
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: 無此行程識別碼"
+
+#: jobs.c:1865
+#, c-format
+msgid "Signal %d"
+msgstr "訊號 %d"
+
+#: jobs.c:1879 jobs.c:1905
+msgid "Done"
+msgstr "已完�"
+
+#: jobs.c:1884 siglist.c:122
+msgid "Stopped"
+msgstr "�止"
+
+#: jobs.c:1888
+#, c-format
+msgid "Stopped(%s)"
+msgstr "已�止(%s)"
+
+#: jobs.c:1892
+msgid "Running"
+msgstr "執行中"
+
+#: jobs.c:1909
+#, c-format
+msgid "Done(%d)"
+msgstr "已完�(%d)"
+
+#: jobs.c:1911
+#, c-format
+msgid "Exit %d"
+msgstr "退出 %d"
+
+#: jobs.c:1914
+msgid "Unknown status"
+msgstr "�明狀態"
+
+#: jobs.c:2001
+#, c-format
+msgid "(core dumped) "
+msgstr "(核心已傾�)"
+
+#: jobs.c:2020
+#, c-format
+msgid "  (wd: %s)"
+msgstr "  (工作目錄: %s)"
+
+#: jobs.c:2259
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "�行程 setpgid (%ld 到 %ld)"
+
+#: jobs.c:2617 nojobs.c:664
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: 行程識別碼 %ld �是目� shell 的�行程"
+
+#: jobs.c:2893
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wiat_for: 沒有行程 %ld 的紀錄"
+
+#: jobs.c:3236
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: 工作 %d 已�止"
+
+#: jobs.c:3564
+#, fuzzy, c-format
+msgid "%s: no current jobs"
+msgstr "%s：沒有此類工作"
+
+#: jobs.c:3571
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: 工作已經終止"
+
+#: jobs.c:3580
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: 工作 %d 已在背景執行"
+
+#: jobs.c:3806
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr "waitchld: 開啟 WNOHANG 以��無�阻塞"
+
+#: jobs.c:4320
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: 第 %d 列："
+
+#: jobs.c:4334 nojobs.c:919
+#, c-format
+msgid " (core dumped)"
+msgstr " (核心已傾�)"
+
+#: jobs.c:4346 jobs.c:4359
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(目�工作目錄：%s)\n"
+
+#: jobs.c:4391
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: getpgrp 失敗"
+
+#: jobs.c:4447
+msgid "initialize_job_control: no job control in background"
+msgstr "initialize_job_control：背景中沒有工作控制"
+
+#: jobs.c:4463
+msgid "initialize_job_control: line discipline"
+msgstr "initialize_job_control: 列�律"
+
+#: jobs.c:4473
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:4494 jobs.c:4503
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr "無法設定終端行程群組(%d)"
+
+#: jobs.c:4508
+msgid "no job control in this shell"
+msgstr "此 shell 中無工作控制"
+
+#: lib/malloc/malloc.c:353
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr "malloc: 主張失敗: %s\n"
+
+#: lib/malloc/malloc.c:369
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+"\r\n"
+"malloc: %s:%d: 主張已修補\r\n"
+
+#: lib/malloc/malloc.c:370 lib/malloc/malloc.c:933
+msgid "unknown"
+msgstr "�明"
+
+#: lib/malloc/malloc.c:882
+msgid "malloc: block on free list clobbered"
+msgstr "malloc: 空閒串列中的�塊�壞"
+
+#: lib/malloc/malloc.c:972
+msgid "free: called with already freed block argument"
+msgstr "free: 用已經釋放的�塊�為呼��數"
+
+#: lib/malloc/malloc.c:975
+msgid "free: called with unallocated block argument"
+msgstr "free: 用未分�的�塊�為呼��數"
+
+#: lib/malloc/malloc.c:994
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr "free: 檢測到下�溢�；mh_nbytes 超出範�"
+
+#: lib/malloc/malloc.c:1001
+#, fuzzy
+msgid "free: underflow detected; magic8 corrupted"
+msgstr "free: 檢測到下�溢�；mh_nbytes 超出範�"
+
+#: lib/malloc/malloc.c:1009
+msgid "free: start and end chunk sizes differ"
+msgstr "free: 啟始和末尾�塊大��一致"
+
+#: lib/malloc/malloc.c:1119
+msgid "realloc: called with unallocated block argument"
+msgstr "realloc: 用未分�的�塊�為呼��數"
+
+#: lib/malloc/malloc.c:1134
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr "realloc: 檢測到下�溢�；mh_nbytes 超出範�"
+
+#: lib/malloc/malloc.c:1141
+#, fuzzy
+msgid "realloc: underflow detected; magic8 corrupted"
+msgstr "realloc: 檢測到下�溢�；mh_nbytes 超出範�"
+
+#: lib/malloc/malloc.c:1150
+msgid "realloc: start and end chunk sizes differ"
+msgstr "realloc: 啟始和末尾�塊大��一致"
+
+#: lib/malloc/table.c:191
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr "register_alloc: 分�表已經充滿了 FIND_ALLOC？\n"
+
+#: lib/malloc/table.c:200
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr "register_alloc: %p 在表中顯示為已分�？\n"
+
+#: lib/malloc/table.c:253
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: %p 在表中顯示為已釋放？\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "無效的基底"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s：�明的主機"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s：無效�務"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr "%s：�當的網路路徑�格"
+
+#: lib/sh/netopen.c:347
+msgid "network operations not supported"
+msgstr "�支�網路�作"
+
+#: locale.c:217
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: 無法變更語��項 (%s)"
+
+#: locale.c:219
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: 無法變更語��項 (%s): %s"
+
+#: locale.c:292
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: 無法變更語��項 (%s)"
+
+#: locale.c:294
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: 無法變更語��項 (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "您有郵件在 $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "您有新郵件在 $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "郵件在 %s 已閱讀\n"
+
+#: make_cmd.c:317
+msgid "syntax error: arithmetic expression required"
+msgstr "語法錯誤：需�算�"
+
+#: make_cmd.c:319
+msgid "syntax error: `;' unexpected"
+msgstr "語法錯誤：「;��外"
+
+#: make_cmd.c:320
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "語法錯誤：「((%s))�"
+
+#: make_cmd.c:572
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr "make_here_document：�當的指示類型 %d"
+
+#: make_cmd.c:657
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr "立�檔案在第 %d 列被檔案��符分隔 (需�「%s�)"
+
+#: make_cmd.c:756
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr "make_redirection：�新導�指示「%d�超出範�"
+
+#: parse.y:2393
+#, c-format
+msgid ""
+"shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line "
+"truncated"
+msgstr "shell_getc: shell_input_line_size (%zu) 超� SIZE_MAX (%lu)：列被截斷"
+
+#: parse.y:2826
+msgid "maximum here-document count exceeded"
+msgstr "超�此處檔案上�最大值"
+
+#: parse.y:3581 parse.y:3957 parse.y:4556
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "尋找符�的「%c�時�到了未�期的檔案��符"
+
+#: parse.y:4696
+msgid "unexpected EOF while looking for `]]'"
+msgstr "尋找「]]�時�到了未�期的檔案��符"
+
+#: parse.y:4701
+#, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "�件表示�中有語法錯誤: 未�期的字組「%s�"
+
+#: parse.y:4705
+msgid "syntax error in conditional expression"
+msgstr "語法錯誤，在有�件的表示�"
+
+#: parse.y:4783
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "未�期的字組「%s�，需�「)�"
+
+#: parse.y:4787
+msgid "expected `)'"
+msgstr "�期「)�"
+
+#: parse.y:4815
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr "一元�件�算�使用了未�期的�數「%s�"
+
+#: parse.y:4819
+msgid "unexpected argument to conditional unary operator"
+msgstr "一元�件�算�使用了未�期的�數"
+
+#: parse.y:4865
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr "未�期的字組「%s�，需�二元�件�算�"
+
+#: parse.y:4869
+msgid "conditional binary operator expected"
+msgstr "需�二元�件�算�"
+
+#: parse.y:4891
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr "二元�件�算�使用了未�期的�數「%s�"
+
+#: parse.y:4895
+msgid "unexpected argument to conditional binary operator"
+msgstr "二元�件�算�使用了未�期的�數"
+
+#: parse.y:4906
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr "�件指令中有未�期的字組「%c�"
+
+#: parse.y:4909
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr "�件指令中有未�期的字組「%s�"
+
+#: parse.y:4913
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr "�件指令中有未�期的字組 %d"
+
+#: parse.y:6336
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "未�期的字組「%s�附近有語法錯誤"
+
+#: parse.y:6355
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "「%s�附近有語法錯誤"
+
+#: parse.y:6365
+msgid "syntax error: unexpected end of file"
+msgstr "語法錯誤: 未�期的檔案�尾"
+
+#: parse.y:6365
+msgid "syntax error"
+msgstr "語法錯誤"
+
+#: parse.y:6428
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "使用「%s�退出 shell。\n"
+
+#: parse.y:6602
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "尋找符�的「)�時�到了未�期的檔案��符"
+
+#: pcomplete.c:1132
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "補完: 未找到函數「%s�"
+
+#: pcomplete.c:1722
+#, c-format
+msgid "programmable_completion: %s: possible retry loop"
+msgstr "programmable_completion：%s：�能�試迴圈"
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: 空的補完�格"
+
+#: print_cmd.c:302
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr "print_command: 錯誤的�件連接符「%d�"
+
+#: print_cmd.c:375
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: 無效的檔案�述符"
+
+#: print_cmd.c:380
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: 空的檔案指標"
+
+#: print_cmd.c:384
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != fileno xtrace fp (%d)"
+
+#: print_cmd.c:1540
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf:「%c�: 無效的格�字元"
+
+#: redir.c:149 redir.c:197
+msgid "file descriptor out of range"
+msgstr "檔案�述符超出範�"
+
+#: redir.c:204
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: 模稜兩�的�定�"
+
+#: redir.c:208
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: 無法覆寫已存在的檔案"
+
+#: redir.c:213
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: ��的: 無法�定�輸出"
+
+#: redir.c:218
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "無法為立�檔案建立暫存檔案: %s"
+
+#: redir.c:222
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: 無法將檔案�述符指派給變數"
+
+#: redir.c:649
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "沒有網路時�支� /dev/(tcp|udp)/host/port"
+
+#: redir.c:938 redir.c:1053 redir.c:1114 redir.c:1284
+msgid "redirection error: cannot duplicate fd"
+msgstr "�定�錯誤: 無法複製檔案�述符"
+
+#: shell.c:347
+msgid "could not find /tmp, please create!"
+msgstr "無法找到 /tmp，請建立"
+
+#: shell.c:351
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp 必須為有效的目錄�稱"
+
+#: shell.c:804
+msgid "pretty-printing mode ignored in interactive shells"
+msgstr "已在互動� shell 中忽略美化輸出模�"
+
+#: shell.c:948
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c：無效�項"
+
+#: shell.c:1319
+#, c-format
+msgid "cannot set uid to %d: effective uid %d"
+msgstr "無法設定 UID 至 %d：有效的 UID %d"
+
+#: shell.c:1330
+#, c-format
+msgid "cannot set gid to %d: effective gid %d"
+msgstr "無法設定 GID 至 %d：有效的 GID %d"
+
+#: shell.c:1518
+msgid "cannot start debugger; debugging mode disabled"
+msgstr "無法開啟�錯器；�錯模�已�用"
+
+#: shell.c:1632
+#, c-format
+msgid "%s: Is a directory"
+msgstr "%s: 是一個目錄"
+
+#: shell.c:1881
+msgid "I have no name!"
+msgstr "我沒有�字�"
+
+#: shell.c:2035
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash，版本 %s-(%s)\n"
+
+#: shell.c:2036
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"用法：\t%s [GNU 長�項] [�項] …\n"
+"\t%s [GNU 長�項] [�項] 指令稿檔案 …\n"
+
+#: shell.c:2038
+msgid "GNU long options:\n"
+msgstr "GNU 長�項：\n"
+
+#: shell.c:2042
+msgid "Shell options:\n"
+msgstr "Shell �項：\n"
+
+#: shell.c:2043
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr "\t-irsD 或 -c <指令> 或 -O <shopt �項>\t\t(僅��呼�)\n"
+
+#: shell.c:2062
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s or -o �項\n"
+
+#: shell.c:2068
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr "輸入「%s -c \"help set\"�更多關於 shell �項的訊�。\n"
+
+#: shell.c:2069
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr "輸入「%s -c help�更多關於內建 shell 指令的訊�。\n"
+
+#: shell.c:2070
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "使用「bashbug�指令通報程�錯誤。\n"
+
+#: shell.c:2072
+#, c-format
+msgid "bash home page: <http://www.gnu.org/software/bash>\n"
+msgstr "bash 官網：<http://www.gnu.org/software/bash>\n"
+
+#: shell.c:2073
+#, c-format
+msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
+msgstr "GNU 軟體的常見使用說明：<http://www.gnu.org/gethelp/>\n"
+
+#: sig.c:757
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask：%d：無效�作"
+
+#: siglist.c:47
+msgid "Bogus signal"
+msgstr "�訊號"
+
+#: siglist.c:50
+msgid "Hangup"
+msgstr "掛斷"
+
+#: siglist.c:54
+msgid "Interrupt"
+msgstr "中止"
+
+#: siglist.c:58
+msgid "Quit"
+msgstr "��"
+
+#: siglist.c:62
+msgid "Illegal instruction"
+msgstr "無效指令"
+
+#: siglist.c:66
+msgid "BPT trace/trap"
+msgstr "斷點追蹤/陷阱"
+
+#: siglist.c:74
+msgid "ABORT instruction"
+msgstr "放棄指令"
+
+#: siglist.c:78
+msgid "EMT instruction"
+msgstr "模擬器陷阱指令"
+
+#: siglist.c:82
+msgid "Floating point exception"
+msgstr "期望浮點數"
+
+#: siglist.c:86
+msgid "Killed"
+msgstr "強制��"
+
+#: siglist.c:90
+msgid "Bus error"
+msgstr "匯�排錯誤"
+
+#: siglist.c:94
+msgid "Segmentation fault"
+msgstr "程�記憶體�段錯誤"
+
+#: siglist.c:98
+msgid "Bad system call"
+msgstr "無效系統呼�"
+
+#: siglist.c:102
+msgid "Broken pipe"
+msgstr "管線�壞"
+
+#: siglist.c:106
+msgid "Alarm clock"
+msgstr "鬧�"
+
+#: siglist.c:110
+msgid "Terminated"
+msgstr "終止"
+
+#: siglist.c:114
+msgid "Urgent IO condition"
+msgstr "緊急 I/O 狀�"
+
+#: siglist.c:118
+msgid "Stopped (signal)"
+msgstr "�止（信號）"
+
+#: siglist.c:126
+msgid "Continue"
+msgstr "繼續"
+
+#: siglist.c:134
+msgid "Child death or stop"
+msgstr "�行程已死或者�止"
+
+#: siglist.c:138
+msgid "Stopped (tty input)"
+msgstr "�止（tty 輸入）"
+
+#: siglist.c:142
+msgid "Stopped (tty output)"
+msgstr "�止（tty 輸出）"
+
+#: siglist.c:146
+msgid "I/O ready"
+msgstr "I/O 就緒"
+
+#: siglist.c:150
+msgid "CPU limit"
+msgstr "CPU �制"
+
+#: siglist.c:154
+msgid "File limit"
+msgstr "檔案�制"
+
+#: siglist.c:158
+msgid "Alarm (virtual)"
+msgstr "警報(虛擬)"
+
+#: siglist.c:162
+msgid "Alarm (profile)"
+msgstr "警報(�寫)"
+
+#: siglist.c:166
+msgid "Window changed"
+msgstr "已變更視窗"
+
+#: siglist.c:170
+msgid "Record lock"
+msgstr "記錄鎖"
+
+#: siglist.c:174
+msgid "User signal 1"
+msgstr "使用者訊號 1"
+
+#: siglist.c:178
+msgid "User signal 2"
+msgstr "使用者訊號 2"
+
+#: siglist.c:182
+msgid "HFT input data pending"
+msgstr "HFT 待輸入資料"
+
+#: siglist.c:186
+msgid "power failure imminent"
+msgstr "�將�止電�"
+
+#: siglist.c:190
+msgid "system crash imminent"
+msgstr "系統�將崩潰"
+
+#: siglist.c:194
+msgid "migrate process to another CPU"
+msgstr "�移行程至�一個 CPU"
+
+#: siglist.c:198
+msgid "programming error"
+msgstr "程�設計錯誤"
+
+#: siglist.c:202
+msgid "HFT monitor mode granted"
+msgstr "已授予 HFT 監視模�"
+
+#: siglist.c:206
+msgid "HFT monitor mode retracted"
+msgstr "已復原 HFT 監視模�"
+
+#: siglist.c:210
+msgid "HFT sound sequence has completed"
+msgstr "已完� HFT �音�列"
+
+#: siglist.c:214
+msgid "Information request"
+msgstr "資訊請求"
+
+#: siglist.c:222 siglist.c:224
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "�明訊號 #%d"
+
+#: subst.c:1476 subst.c:1666
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr "錯誤的�代: 在 %2$s 中沒有閉�的「%1$s�"
+
+#: subst.c:3281
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr "%s: 無法將串列指派給陣列�員"
+
+#: subst.c:5910 subst.c:5926
+msgid "cannot make pipe for process substitution"
+msgstr "無法為行程�代建立管�"
+
+#: subst.c:5985
+msgid "cannot make child for process substitution"
+msgstr "無法為行程�代建立�行程"
+
+#: subst.c:6059
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "無法開啟命�管� %s 進 readline-"
+
+#: subst.c:6061
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "無法開啟命�管� %s 進行寫入"
+
+#: subst.c:6084
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr "無法將命�管� %s �為檔案�述符 %d 複製"
+
+#: subst.c:6213
+msgid "command substitution: ignored null byte in input"
+msgstr "指令�代：在輸入中忽略了空�元組"
+
+#: subst.c:6353
+msgid "cannot make pipe for command substitution"
+msgstr "無法為指令�代建立管�"
+
+#: subst.c:6397
+msgid "cannot make child for command substitution"
+msgstr "無法為指令�代建立�行程"
+
+#: subst.c:6423
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr "command_substitute: 無法將管�複製為檔案�述符 1"
+
+#: subst.c:6883 subst.c:9952
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr "%s: 無效的引用變數�"
+
+#: subst.c:6979 subst.c:6997 subst.c:7169
+#, c-format
+msgid "%s: invalid indirect expansion"
+msgstr "%s: 無效的間接擴充"
+
+#: subst.c:7013 subst.c:7177
+#, c-format
+msgid "%s: invalid variable name"
+msgstr "%s：無效的變數�稱"
+
+#: subst.c:7256
+#, c-format
+msgid "%s: parameter not set"
+msgstr "%s：�數未設定"
+
+#: subst.c:7258
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: �數為空或未設定"
+
+#: subst.c:7503 subst.c:7518
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: �串表示� < 0"
+
+#: subst.c:9281 subst.c:9302
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: 錯誤的�代"
+
+#: subst.c:9390
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: 無法如此指派"
+
+#: subst.c:9814
+msgid ""
+"future versions of the shell will force evaluation as an arithmetic "
+"substitution"
+msgstr "未來版本的 shell 會強制以算術�代求值"
+
+#: subst.c:10367
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "錯誤的�代: 在 %s 中沒有閉�的「`�"
+
+#: subst.c:11434
+#, c-format
+msgid "no match: %s"
+msgstr "無符�: %s"
+
+#: test.c:147
+msgid "argument expected"
+msgstr "需��數"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: 需�整數表示�"
+
+#: test.c:265
+msgid "`)' expected"
+msgstr "需�「)�"
+
+#: test.c:267
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "需�「)�，得到 %s"
+
+#: test.c:466 test.c:799
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: 需�二元表示�"
+
+#: test.c:756 test.c:759
+#, c-format
+msgid "%s: unary operator expected"
+msgstr "%s: 需�一元表示�"
+
+#: test.c:881
+msgid "missing `]'"
+msgstr "缺少「]�"
+
+#: test.c:899
+#, fuzzy, c-format
+msgid "syntax error: `%s' unexpected"
+msgstr "語法錯誤：「;��外"
+
+#: trap.c:220
+msgid "invalid signal number"
+msgstr "無效訊號數字"
+
+#: trap.c:325
+#, c-format
+msgid "trap handler: maximum trap handler level exceeded (%d)"
+msgstr "��處�函�：�到最大��處�函�等級 (%d)"
+
+#: trap.c:414
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr "run_pending_traps: trap_list[%d] 中的錯誤值: %p"
+
+#: trap.c:418
+#, c-format
+msgid ""
+"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr "run_pending_traps：訊號處�是 SIG_DFL，resending %d (%s) to myself"
+
+#: trap.c:487
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler：�當的訊號 %d"
+
+#: variables.c:421
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr "錯誤，輸入的函數定義為「%s�"
+
+#: variables.c:833
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "shell 層次 (%d) 太高，�設為 1"
+
+#: variables.c:2674
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: 目�作用域中沒有函數語境"
+
+#: variables.c:2693
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr "%s: 變數��指派值"
+
+#: variables.c:3475
+#, c-format
+msgid "%s: assigning integer to name reference"
+msgstr "%s：指定數字至�稱�考"
+
+#: variables.c:4404
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: 目�作用域中沒有函數語境"
+
+#: variables.c:4771
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s 有空的 exportstr"
+
+#: variables.c:4776 variables.c:4785
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "%2$s 的 exportstr 中有無效的字元 %1$d"
+
+#: variables.c:4791
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "%s 的 exportstr 中沒有「=�"
+
+#: variables.c:5331
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr "pop_var_context: shell_variables 的�端�是函數語境"
+
+#: variables.c:5344
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: 沒有 global_variables 語境"
+
+#: variables.c:5424
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr "pop_scope: shell_variables 的�端�是臨時環境作用域"
+
+#: variables.c:6387
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: 無法�為檔案開啟"
+
+#: variables.c:6392
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr "%s: %s: 追蹤檔案�述符的值無效"
+
+#: variables.c:6437
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr "%s: %s: 相容版本數值超出範�"
+
+#: version.c:46 version2.c:46
+#, fuzzy
+msgid "Copyright (C) 2020 Free Software Foundation, Inc."
+msgstr "著作權所有 (C) 2018 自由軟體基金會"
+
+#: version.c:47 version2.c:47
+msgid ""
+"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+msgstr ""
+"授權�款 GPLv3+: GNU GPL 授權�款第三版或者更新版本 <http://gnu.org/licenses/"
+"gpl.html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash，版本 %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr "本軟體是自由軟體，您�以自由地變更和�新發布。"
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "在法律許�的情�下特此明示，本軟體��供任何擔�。"
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: 無法分� %lu �元組 (已分� %lu �元組)"
+
+#: xmalloc.c:95
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: 無法分� %lu �元組"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: 無法分� %lu �元組 (已分� %lu �元組)"
+
+#: xmalloc.c:167
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: 無法分� %lu �元組"
+
+#: builtins.c:45
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [�稱[=值] … ]"
+
+#: builtins.c:49
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] �稱 [�稱 …]"
+
+#: builtins.c:53
+msgid ""
+"bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
+"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr ""
+"bind [-lpvsPSVX] [-m 按�映射] [-f 檔�] [-q �稱] [-u �稱] [-r 按��列] [-"
+"x 按��列:shell-指令] [按��列:readline-函數 或 readline-指令]"
+
+#: builtins.c:56
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:58
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:60
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [shell 內建物件 [�數 …]]"
+
+#: builtins.c:63
+msgid "caller [expr]"
+msgstr "caller [表示�]"
+
+#: builtins.c:66
+msgid "cd [-L|[-P [-e]] [-@]] [dir]"
+msgstr "cd [-L|[-P [-e]] [-@]] [目錄]"
+
+#: builtins.c:68
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:76
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] 指令 [�數 …]"
+
+#: builtins.c:78
+#, fuzzy
+msgid "declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilnrtux] [-p] [�稱[=值] …]"
+
+#: builtins.c:80
+#, fuzzy
+msgid "typeset [-aAfFgiIlnrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilnrtux] [-p] �稱[=值] ..."
+
+#: builtins.c:82
+msgid "local [option] name[=value] ..."
+msgstr "local [option] �稱[=值] …"
+
+#: builtins.c:85
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [�數 …]"
+
+#: builtins.c:89
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [�數 …]"
+
+#: builtins.c:92
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f 檔�] [�稱 …]"
+
+#: builtins.c:94
+msgid "eval [arg ...]"
+msgstr "eval [�數 …]"
+
+#: builtins.c:96
+#, fuzzy
+msgid "getopts optstring name [arg ...]"
+msgstr "getopts �項字串 �稱 [�數]"
+
+#: builtins.c:98
+#, fuzzy
+msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]"
+msgstr "exec [-cl] [-a �稱] [指令 [�數 …]] [�定� …]"
+
+#: builtins.c:100
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:102
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:105
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr "fc [-e 編輯器�] [-lnr] [起始] [終止] 或 fc -s [模�=�代串] [指令]"
+
+#: builtins.c:109
+msgid "fg [job_spec]"
+msgstr "fg [工作�格]"
+
+#: builtins.c:113
+msgid "bg [job_spec ...]"
+msgstr "bg [工作�格 …]"
+
+#: builtins.c:116
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p 路徑�] [-dt] [�稱 …]"
+
+#: builtins.c:119
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [模� …]"
+
+#: builtins.c:123
+msgid ""
+"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
+"[arg...]"
+msgstr ""
+"history [-c] [-d �移�] [n] 或 history -anrw [檔�] 或 history -ps �數 [�"
+"數…]"
+
+#: builtins.c:127
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [工作�格 …] 或 jobs -x 指令 [�數]"
+
+#: builtins.c:131
+msgid "disown [-h] [-ar] [jobspec ... | pid ...]"
+msgstr "disown [-h] [-ar] [jobspec ... | pid ...]"
+
+#: builtins.c:134
+msgid ""
+"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
+"[sigspec]"
+msgstr ""
+"kill [-s 訊號�格 | -n 訊號編號 | -訊號�格] 行程識別碼 | 工作�格 … 或 kill "
+"-l [訊號�格]"
+
+#: builtins.c:136
+msgid "let arg [arg ...]"
+msgstr "let �數 [�數 …]"
+
+#: builtins.c:138
+msgid ""
+"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
+"prompt] [-t timeout] [-u fd] [name ...]"
+msgstr ""
+"read [-ers] [-a 陣列] [-d 分隔符] [-i 緩��文字] [-n 讀�字元數] [-N 讀�字"
+"元數] [-p �示符] [-t 逾時] [-u 檔案�述符] [�稱 …]"
+
+#: builtins.c:140
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:142
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [--abefhkmnptuvxBCHP] [-o �項�] [--] [�數 …]"
+
+#: builtins.c:144
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [�稱 …]"
+
+#: builtins.c:146
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [�稱[=值] …] 或 export -p"
+
+#: builtins.c:148
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [�稱[=值] …] 或 readonly -p"
+
+#: builtins.c:150
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:152
+msgid "source filename [arguments]"
+msgstr "source 檔� [�數]"
+
+#: builtins.c:154
+msgid ". filename [arguments]"
+msgstr ". 檔� [�數]"
+
+#: builtins.c:157
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:160
+msgid "test [expr]"
+msgstr "test [表示�]"
+
+#: builtins.c:162
+msgid "[ arg... ]"
+msgstr "[ �數… ]"
+
+#: builtins.c:166
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[�數] 訊號�格 …]"
+
+#: builtins.c:168
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] �稱 [�稱 …]"
+
+#: builtins.c:171
+msgid "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]"
+
+#: builtins.c:174
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [模�]"
+
+#: builtins.c:177
+#, fuzzy
+msgid "wait [-fn] [-p var] [id ...]"
+msgstr "wait [-fn] [編號 …]"
+
+#: builtins.c:181
+msgid "wait [pid ...]"
+msgstr "wait [行程識別碼 …]"
+
+#: builtins.c:184
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for �稱 [in 字詞 … ] ; do 指令 ; done"
+
+#: builtins.c:186
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( 表示�1; 表示�2; 表示�3 )); do 指令 ; done"
+
+#: builtins.c:188
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select NAME [in 字詞 … ;] do 指令 ; done"
+
+#: builtins.c:190
+msgid "time [-p] pipeline"
+msgstr "time [-p] 管�"
+
+#: builtins.c:192
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case 詞 in [模� [| 模�]…) 指令 ;;]… esac"
+
+#: builtins.c:194
+msgid ""
+"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
+"COMMANDS; ] fi"
+msgstr "if 指令 ; then 指令 ; [ elif 指令 ; then 指令 ; ]… [ else 指令 ; ] fi"
+
+#: builtins.c:196
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while 指令 ; do 指令 ; done"
+
+#: builtins.c:198
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until 指令 ; do 指令 ; done"
+
+#: builtins.c:200
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [�稱] 指令 [�定�]"
+
+#: builtins.c:202
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function �稱 { 指令 ; } 或 name () { 指令 ; }"
+
+#: builtins.c:204
+msgid "{ COMMANDS ; }"
+msgstr "{ 指令 ; }"
+
+#: builtins.c:206
+msgid "job_spec [&]"
+msgstr "job_spec [&]"
+
+#: builtins.c:208
+msgid "(( expression ))"
+msgstr "(( 表示� ))"
+
+#: builtins.c:210
+msgid "[[ expression ]]"
+msgstr "[[ 表示� ]]"
+
+#: builtins.c:212
+msgid "variables - Names and meanings of some shell variables"
+msgstr "variables - 一些 shell 變數的�稱和�義"
+
+#: builtins.c:215
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | 目錄]"
+
+#: builtins.c:219
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:223
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:226
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [�項� …]"
+
+#: builtins.c:228
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v var] 格� [�數]"
+
+#: builtins.c:231
+#, fuzzy
+msgid ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-"
+"W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
+"suffix] [name ...]"
+msgstr ""
+"complete [-abcdefgjksuv] [-pr] [-DEI] [-o �項] [-A 動作] [-G 全域模�] [-W "
+"詞語列表]  [-F 函數] [-C 指令] [-X �濾模�] [-P 字首] [-S 字尾] [�稱 …]"
+
+#: builtins.c:235
+#, fuzzy
+msgid ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-"
+"F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr ""
+"compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist]  "
+"[-F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+
+#: builtins.c:239
+msgid "compopt [-o|+o option] [-DEI] [name ...]"
+msgstr "compopt [-o|+o �項] [-DEI] [�稱 …]"
+
+#: builtins.c:242
+msgid ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+
+#: builtins.c:244
+msgid ""
+"readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C "
+"callback] [-c quantum] [array]"
+msgstr ""
+"readarray [-d 分割符號] [-n 計數] [-O 起始�號] [-s 計數] [-t] [-u fd] [-C 回"
+"呼] [-c 定�] [陣列]"
+
+#: builtins.c:256
+msgid ""
+"Define or display aliases.\n"
+"    \n"
+"    Without arguments, `alias' prints the list of aliases in the reusable\n"
+"    form `alias NAME=VALUE' on standard output.\n"
+"    \n"
+"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+"    A trailing space in VALUE causes the next word to be checked for\n"
+"    alias substitution when the alias is expanded.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint all defined aliases in a reusable format\n"
+"    \n"
+"    Exit Status:\n"
+"    alias returns true unless a NAME is supplied for which no alias has "
+"been\n"
+"    defined."
+msgstr ""
+"定義或顯示別�。\n"
+"    \n"
+"    �帶�數時，「alias�以��用的格�\n"
+"   「alias �稱=值�在標準輸出�置上�出別�列表。\n"
+"    \n"
+"    �則，�於�個指定值的�稱定義一個別�。\n"
+"    值末尾的空格會使下一個字詞被檢測\n"
+"    �為別��代展開。\n"
+"    \n"
+"    �項：\n"
+"      -p\t以��用的格��出所有的已定義別�\n"
+"    \n"
+"    退出狀態：\n"
+"    除�一個沒有定義的�字被�為�數�供，�則 alias \n"
+"    回傳值為真。"
+
+#: builtins.c:278
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all alias definitions\n"
+"    \n"
+"    Return success unless a NAME is not an existing alias."
+msgstr ""
+"從別�定義列表中刪除�一個 <�稱>。\n"
+"    \n"
+"    �項：\n"
+"      -a\t刪除所有的別�定義\n"
+"    \n"
+"    回傳�功，除� <�稱> �是一個已存在的別�。"
+
+#: builtins.c:291
+msgid ""
+"Set Readline key bindings and variables.\n"
+"    \n"
+"    Bind a key sequence to a Readline function or a macro, or set a\n"
+"    Readline variable.  The non-option argument syntax is equivalent to\n"
+"    that found in ~/.inputrc, but must be passed as a single argument:\n"
+"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+"    \n"
+"    Options:\n"
+"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
+"                         command.  Acceptable keymap names are emacs,\n"
+"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
+"move,\n"
+"                         vi-command, and vi-insert.\n"
+"      -l                 List names of functions.\n"
+"      -P                 List function names and bindings.\n"
+"      -p                 List functions and bindings in a form that can be\n"
+"                         reused as input.\n"
+"      -S                 List key sequences that invoke macros and their "
+"values\n"
+"      -s                 List key sequences that invoke macros and their "
+"values\n"
+"                         in a form that can be reused as input.\n"
+"      -V                 List variable names and values\n"
+"      -v                 List variable names and values in a form that can\n"
+"                         be reused as input.\n"
+"      -q  function-name  Query about which keys invoke the named function.\n"
+"      -u  function-name  Unbind all keys which are bound to the named "
+"function.\n"
+"      -r  keyseq         Remove the binding for KEYSEQ.\n"
+"      -f  filename       Read key bindings from FILENAME.\n"
+"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+"    \t\t\t\tKEYSEQ is entered.\n"
+"      -X                 List key sequences bound with -x and associated "
+"commands\n"
+"                         in a form that can be reused as input.\n"
+"    \n"
+"    Exit Status:\n"
+"    bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+"設定 Readline 按��定和變數。\n"
+"    \n"
+"    �定一個按��列到一個 Readline 函數或者巨集，或者設定一個\n"
+"    Readline 變數。��項�數的語法和 ~/.inputrc 檔案中的等\n"
+"    �，但是必須�為一個�數被傳�，\n"
+"    例如，bind '\"\\C-x\\C-r\": re-read-init-file'。\n"
+"    \n"
+"    �項：\n"
+"      -m  按�映射      在此指令執行�程中使用指定的按�映射。\n"
+"                     �被接�的按�映射�字有 emacs�emacs-standard�emacs-"
+"meta�\n"
+"                     emacs-ctlx�vi�vi-move�vi-command�和 vi-insert。\n"
+"      -l             列出函數�稱。\n"
+"      -P             列出函數�稱和�定。\n"
+"      -p             以�以�新用作輸入的格�列出函數�稱和�定。\n"
+"      -S             列出�以啟動巨集的按��列以�它們的值\n"
+"      -s             以�以�新用作輸入的格�列出�以啟動巨集的�以�它們的"
+"值。\n"
+"      -V             列出變數�稱和它們的值\n"
+"      -v             以�以�新用作輸入的格�列出變數的�稱和它們的值\n"
+"      -q  函數�      查詢指定的函數�以由哪些�啟動。\n"
+"      -u  函數�      ��定所有�定至指定函數的�。\n"
+"      -r  按��列    �消指定按��列的�定。\n"
+"      -f  檔�      從指定檔案中讀�按��定。\n"
+"      -x  按��列:shell 指令\t當指定的按��列被輸入時，執行指定的 shell 指"
+"令。\n"
+"      -X             以�被�用的形�列出用 -x �定的按��列和指令。\n"
+"    \n"
+"    退出狀態：\n"
+"    除�使用了無法識別的�項或者錯誤發生，�則回傳 0。"
+
+#: builtins.c:330
+msgid ""
+"Exit for, while, or until loops.\n"
+"    \n"
+"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
+"    loops.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"退出 for�while 或 until 迴圈\n"
+"    \n"
+"    退出一個 FOR�WHILE 或 UNTIL 迴圈。如果指定了 N，則跳出 N �\n"
+"    迴圈\n"
+"    \n"
+"    退出狀態：\n"
+"    退出狀態為 0 除� N �大於或等於 1。"
+
+#: builtins.c:342
+msgid ""
+"Resume for, while, or until loops.\n"
+"    \n"
+"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+"    If N is specified, resumes the Nth enclosing loop.\n"
+"    \n"
+"    Exit Status:\n"
+"    The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+"繼續 for�while 或 until 迴圈。\n"
+"    \n"
+"    繼續目� FOR�WHILE 或 UNTIL 迴圈的下一步。\n"
+"    如果指定了 N， 則繼續目�的第 N �迴圈。\n"
+"    \n"
+"    退出狀態：\n"
+"    退出狀態為 0 除� N �大於或等於 1。"
+
+#: builtins.c:354
+msgid ""
+"Execute shell builtins.\n"
+"    \n"
+"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
+"    as a shell function, but need to execute the builtin within the "
+"function.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+"    not a shell builtin."
+msgstr ""
+"執行 shell 內建物件。\n"
+"    \n"
+"    帶 <�數> 執行 <shell 內建物件> 而��指令查詢\n"
+"    在希望以 shell 函數的形�來�新實� shell 內建物件，\n"
+"    但需�在函數之內執行該 shell 內建物件的情�下有用處。\n"
+"    \n"
+"    退出狀態：\n"
+"    以 <shell 內建物件> 的退出狀態為準，或者如果 <shell 內建物件> �是一個 "
+"shell 內建物件時\n"
+"    回傳 false。"
+
+#: builtins.c:369
+msgid ""
+"Return the context of the current subroutine call.\n"
+"    \n"
+"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
+"    \"$line $subroutine $filename\"; this extra information can be used to\n"
+"    provide a stack trace.\n"
+"    \n"
+"    The value of EXPR indicates how many call frames to go back before the\n"
+"    current one; the top frame is frame 0.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
+"    is invalid."
+msgstr ""
+"回傳目��呼�的語境。\n"
+"    \n"
+"    �帶有 EXPR 時，回傳「$line $filename�。帶有 EXPR 時，回傳\n"
+"   「$line $subroutine $filename�；這個�外的資訊�以被用於�供\n"
+"    堆疊追蹤。\n"
+"    \n"
+"    EXPR 的值顯示了到目�呼�框格需�回去多少個呼�框格；頂部框格\n"
+"    是第 0 框格。\n"
+"    \n"
+"    退出狀態：\n"
+"    除� shell �在執行一個 shell 函數或者 EXPR 無效，�則回傳�\n"
+"    果為 0。"
+
+#: builtins.c:387
+msgid ""
+"Change the shell working directory.\n"
+"    \n"
+"    Change the current directory to DIR.  The default DIR is the value of "
+"the\n"
+"    HOME shell variable.\n"
+"    \n"
+"    The variable CDPATH defines the search path for the directory "
+"containing\n"
+"    DIR.  Alternative directory names in CDPATH are separated by a colon "
+"(:).\n"
+"    A null directory name is the same as the current directory.  If DIR "
+"begins\n"
+"    with a slash (/), then CDPATH is not used.\n"
+"    \n"
+"    If the directory is not found, and the shell option `cdable_vars' is "
+"set,\n"
+"    the word is assumed to be  a variable name.  If that variable has a "
+"value,\n"
+"    its value is used for DIR.\n"
+"    \n"
+"    Options:\n"
+"      -L\tforce symbolic links to be followed: resolve symbolic\n"
+"    \t\tlinks in DIR after processing instances of `..'\n"
+"      -P\tuse the physical directory structure without following\n"
+"    \t\tsymbolic links: resolve symbolic links in DIR before\n"
+"    \t\tprocessing instances of `..'\n"
+"      -e\tif the -P option is supplied, and the current working\n"
+"    \t\tdirectory cannot be determined successfully, exit with\n"
+"    \t\ta non-zero status\n"
+"      -@\ton systems that support it, present a file with extended\n"
+"    \t\tattributes as a directory containing the file attributes\n"
+"    \n"
+"    The default is to follow symbolic links, as if `-L' were specified.\n"
+"    `..' is processed by removing the immediately previous pathname "
+"component\n"
+"    back to a slash or the beginning of DIR.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 if the directory is changed, and if $PWD is set successfully "
+"when\n"
+"    -P is used; non-zero otherwise."
+msgstr ""
+"變更 shell 工作目錄。\n"
+"    \n"
+"    變更目�目錄至 <目錄>。�設的 <目錄> 是 shell 變數 HOME\n"
+"    的值。\n"
+"    \n"
+"    變數 CDPATH 定義了�有 <目錄> 的目錄�尋路徑，其中��的目錄�稱由冒號 "
+"(:)分隔。\n"
+"    一個空的目錄�稱表示目�目錄。如果�切�到的 <目錄> 由斜線 (/) 開頭，則 "
+"CDPATH\n"
+"    變數�會被使用。\n"
+"    \n"
+"    如果路徑找�到，並且 shell �項「cdable_vars�被設定，則�數詞被�定為一"
+"個\n"
+"    變數�。如果該變數有值，則它的值被當� <目錄>。\n"
+"    \n"
+"    �項：\n"
+"        -L\t強制跟隨符號連�: 在處�「..�之後解� <目錄> 中的符號連�。\n"
+"        -P\t使用實體目錄�構而�跟隨符號連�: 在處�「..�之�解� <目錄> 中"
+"的符號連�。\n"
+"        -e\t如果使用了 -P �數，但�能�功確定目�工作目錄時，回傳�零的回傳"
+"值。\n"
+"        -@\t在支�擴充屬性的系統上，將一個有這些屬性的檔案當�有檔案屬性的目"
+"錄。\n"
+"    \n"
+"    �設情�下跟隨符號連�，如�指定「-L�。\n"
+"   「..�使用移除��相鄰目錄��員直到 <目錄> 開始或一個斜線的方�處�。\n"
+"    \n"
+"    退出狀態：\n"
+"    如果目錄變更，或在使用 -P �項時 $PWD 修改�功時回傳 0，�則�零。"
+
+#: builtins.c:425
+msgid ""
+"Print the name of the current working directory.\n"
+"    \n"
+"    Options:\n"
+"      -L\tprint the value of $PWD if it names the current working\n"
+"    \t\tdirectory\n"
+"      -P\tprint the physical directory, without any symbolic links\n"
+"    \n"
+"    By default, `pwd' behaves as if `-L' were specified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 0 unless an invalid option is given or the current directory\n"
+"    cannot be read."
+msgstr ""
+"�出目�工作目錄的�字。\n"
+"    \n"
+"    �項：\n"
+"      -L\t�出 $PWD 變數的值，如果它包�了目�的工作目錄\n"
+"      -P\t�出目�的實體路徑，�帶有任何的符號連�\n"
+"    \n"
+"    �設情�下，「pwd�的行為和帶「-L��項一致\n"
+"    \n"
+"    退出狀態：\n"
+"    除�使用了無效�項或者目�目錄��讀，�則回傳狀態為 0。"
+
+#: builtins.c:442
+msgid ""
+"Null command.\n"
+"    \n"
+"    No effect; the command does nothing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"空的指令。\n"
+"    \n"
+"    沒有效果；此指令��任何�作。\n"
+"    \n"
+"    退出狀態：\n"
+"    一律�功。"
+
+#: builtins.c:453
+msgid ""
+"Return a successful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"回傳一個�功�果。\n"
+"    \n"
+"    退出狀態：\n"
+"    一律�功。"
+
+#: builtins.c:462
+msgid ""
+"Return an unsuccessful result.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always fails."
+msgstr ""
+"回傳一個��功的�果。\n"
+"    \n"
+"    退出狀態：\n"
+"    一律失敗。"
+
+#: builtins.c:471
+msgid ""
+"Execute a simple command or display information about commands.\n"
+"    \n"
+"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
+"    information about the specified COMMANDs.  Can be used to invoke "
+"commands\n"
+"    on disk when a function with the same name exists.\n"
+"    \n"
+"    Options:\n"
+"      -p    use a default value for PATH that is guaranteed to find all of\n"
+"            the standard utilities\n"
+"      -v    print a description of COMMAND similar to the `type' builtin\n"
+"      -V    print a more verbose description of each COMMAND\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+"執行一個簡單指令或者顯示指令的相關資訊。\n"
+"    \n"
+"    帶 ARGS �數執行 COMMAND 指令且抑制 shell 函數查詢，或顯示\n"
+"    指定的 COMMAND 指令的資訊。�以在存在相��稱函數定義的\n"
+"    情�下被用於啟動�碟上的指令。\n"
+"    \n"
+"    �項：\n"
+"      -p\t使用 PATH 變數的一個�設值以確�所有的標準工具都能被找到。\n"
+"      -v\t�出 COMMAND 指令的�述，和「type�內建相似\n"
+"      -V\t�出�個 COMMAND 指令的詳細�述\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳 COMMAND 指令的回傳狀態，或者當找�到 COMMAND 指令時失敗。"
+
+#: builtins.c:490
+#, fuzzy
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    Declare variables and give them attributes.  If no NAMEs are given,\n"
+"    display the attributes and values of all variables.\n"
+"    \n"
+"    Options:\n"
+"      -f\trestrict action or display to function names and definitions\n"
+"      -F\trestrict display to function names only (plus line number and\n"
+"    \t\tsource file when debugging)\n"
+"      -g\tcreate global variables when used in a shell function; otherwise\n"
+"    \t\tignored\n"
+"      -I\tif creating a local variable, inherit the attributes and value\n"
+"    \t\tof a variable with the same name at a previous scope\n"
+"      -p\tdisplay the attributes and value of each NAME\n"
+"    \n"
+"    Options which set attributes:\n"
+"      -a\tto make NAMEs indexed arrays (if supported)\n"
+"      -A\tto make NAMEs associative arrays (if supported)\n"
+"      -i\tto make NAMEs have the `integer' attribute\n"
+"      -l\tto convert the value of each NAME to lower case on assignment\n"
+"      -n\tmake NAME a reference to the variable named by its value\n"
+"      -r\tto make NAMEs readonly\n"
+"      -t\tto make NAMEs have the `trace' attribute\n"
+"      -u\tto convert the value of each NAME to upper case on assignment\n"
+"      -x\tto make NAMEs export\n"
+"    \n"
+"    Using `+' instead of `-' turns off the given attribute.\n"
+"    \n"
+"    Variables with the integer attribute have arithmetic evaluation (see\n"
+"    the `let' command) performed when the variable is assigned a value.\n"
+"    \n"
+"    When used in a function, `declare' makes NAMEs local, as with the "
+"`local'\n"
+"    command.  The `-g' option suppresses this behavior.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or a variable\n"
+"    assignment error occurs."
+msgstr ""
+"設定變數值和屬性。\n"
+"    \n"
+"    �範變數並且賦予它們屬性。如果沒用指定�稱，\n"
+"    則顯示所有變數的屬性和值。\n"
+"    \n"
+"    �項：\n"
+"      -f\t�制動作或顯示為�有函數�稱和定義\n"
+"      -F\t�制僅顯示函數�稱 (以�列號和原始檔�於�錯時)\n"
+"      -g\t當用於 shell 函數內時建立全域變數 ; �則忽略\n"
+"      -p\t顯示�個 <�稱> 變數的屬性和值\n"
+"    \n"
+"    設定屬性的�項：\n"
+"      -a\t使 <�稱> �為索引陣列 (如果支�)\n"
+"      -A\t使 <�稱> �為關�陣列 (如果支�)\n"
+"      -i\t使 <�稱> 帶有「integer�(整數)屬性\n"
+"      -l\t將�個 <�稱> 的值在指派時轉為�寫\n"
+"      -n\t使 <�稱> �為指�一個以其值為�稱的變數引用\n"
+"      -r\t將 <�稱> 變為唯讀\n"
+"      -t\t使 <�稱> 帶有「trace�(追蹤)屬性\n"
+"      -u\t將�個 <�稱> 的值在指派時轉為大寫\n"
+"      -x\t將 <�稱> 匯出\n"
+"    \n"
+"    用「+�代替「-�會關閉指定�項。\n"
+"    \n"
+"    帶有整數屬性的變數在指派時將使用算術求值(見\n"
+"   「let�指令)\n"
+"    \n"
+"    在函數中使用時，「declare�使 <�稱> �為本機變數，和「local�\n"
+"    指令一致。「-g��項壓制這個行為\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功除�使用了無效�項或者發生錯誤。"
+
+#: builtins.c:532
+msgid ""
+"Set variable values and attributes.\n"
+"    \n"
+"    A synonym for `declare'.  See `help declare'."
+msgstr ""
+"設定變數的值和屬性。\n"
+"    \n"
+"    功能相�於「declare�。�見「help declare�。"
+
+#: builtins.c:540
+msgid ""
+"Define local variables.\n"
+"    \n"
+"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
+"    be any option accepted by `declare'.\n"
+"    \n"
+"    Local variables can only be used within a function; they are visible\n"
+"    only to the function where they are defined and its children.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied, a variable\n"
+"    assignment error occurs, or the shell is not executing a function."
+msgstr ""
+"定義本機變數。\n"
+"    \n"
+"    建立一個以 <�稱> 為�稱的變數，並且將 VALUE 指派給它。\n"
+"    OPTION �項�以是任何能被「declare�接�的�項。\n"
+"    \n"
+"    本機變數�能在函數內部被使用，它們�能在定義它們的函數內\n"
+"    部以��函數中�見。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功，除�使用了無效的�項�發生了指派錯誤或者 shell �在執行一個函"
+"數。"
+
+#: builtins.c:557
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs, separated by a single space character and followed by "
+"a\n"
+"    newline, on the standard output.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"      -e\tenable interpretation of the following backslash escapes\n"
+"      -E\texplicitly suppress interpretation of backslash escapes\n"
+"    \n"
+"    `echo' interprets the following backslash-escaped characters:\n"
+"      \\a\talert (bell)\n"
+"      \\b\tbackspace\n"
+"      \\c\tsuppress further output\n"
+"      \\e\tescape character\n"
+"      \\E\tescape character\n"
+"      \\f\tform feed\n"
+"      \\n\tnew line\n"
+"      \\r\tcarriage return\n"
+"      \\t\thorizontal tab\n"
+"      \\v\tvertical tab\n"
+"      \\\\\tbackslash\n"
+"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
+"    \t\t0 to 3 octal digits\n"
+"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
+"    \t\tcan be one or two hex digits\n"
+"      \\uHHHH\tthe Unicode character whose value is the hexadecimal value "
+"HHHH.\n"
+"    \t\tHHHH can be one to four hex digits.\n"
+"      \\UHHHHHHHH the Unicode character whose value is the hexadecimal "
+"value\n"
+"    \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"將�數寫入標準輸出。\n"
+"    \n"
+"    在標準輸出上，顯示用空格分割的 ARG �數後跟一個�列。\n"
+"    \n"
+"    �項：\n"
+"      -n\t��追加�列\n"
+"      -e\t啟用下列�斜線逸出的解釋\n"
+"      -E\t顯�地抑制�於�斜線逸出的解釋\n"
+"    \n"
+"   「echo��下列�斜線字元進行逸出：\n"
+"      \\a\t警告(響鈴)\n"
+"      \\b\t退格\n"
+"      \\c\t抑制更多的輸出\n"
+"      \\e\t逸出字元\n"
+"      \\f\t��字元\n"
+"      \\n\t�列\n"
+"      \\r\t輸入�\n"
+"      \\t\t橫�製表符\n"
+"      \\v\t縱�製表符\n"
+"      \\\\\t�斜線\n"
+"      \\0nnn\t以 NNN (八進�)為 ASCII 碼的字元。 NNN �以是 0 到 3 個八進�數"
+"å­—\n"
+"      \\xHH\t以 HH (�六進�)為值的八進�字元。HH �以是一個或兩個�六進�數"
+"å­—\n"
+"      \\uHHHH\t以�六進� HHHH 為值的 Unicode 字元。\n"
+"    \t\tHHHH �為一個到四個�六進�數字。\n"
+"      \\UHHHHHHHH 以�六進� HHHHHHHH 為值的 Unicode 字元。\n"
+"    \t\tHHHHHHHH �為一個到八個�六進�數字。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功除�有寫入錯誤發生。"
+
+#: builtins.c:597
+msgid ""
+"Write arguments to the standard output.\n"
+"    \n"
+"    Display the ARGs on the standard output followed by a newline.\n"
+"    \n"
+"    Options:\n"
+"      -n\tdo not append a newline\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a write error occurs."
+msgstr ""
+"寫入�數至標準輸出�置。\n"
+"    \n"
+"    在標準輸出�置上顯示 <�數> 和一個�列。\n"
+"    \n"
+"    �項：\n"
+"      -n\t�附加�列\n"
+"    \n"
+"    退出狀態：\n"
+"    除�寫錯誤發生，�則回傳�功。"
+
+#: builtins.c:612
+msgid ""
+"Enable and disable shell builtins.\n"
+"    \n"
+"    Enables and disables builtin shell commands.  Disabling allows you to\n"
+"    execute a disk command which has the same name as a shell builtin\n"
+"    without using a full pathname.\n"
+"    \n"
+"    Options:\n"
+"      -a\tprint a list of builtins showing whether or not each is enabled\n"
+"      -n\tdisable each NAME or display a list of disabled builtins\n"
+"      -p\tprint the list of builtins in a reusable format\n"
+"      -s\tprint only the names of Posix `special' builtins\n"
+"    \n"
+"    Options controlling dynamic loading:\n"
+"      -f\tLoad builtin NAME from shared object FILENAME\n"
+"      -d\tRemove a builtin loaded with -f\n"
+"    \n"
+"    Without options, each NAME is enabled.\n"
+"    \n"
+"    To use the `test' found in $PATH instead of the shell builtin\n"
+"    version, type `enable -n test'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+"啟用和�用 shell 內建物件。\n"
+"    \n"
+"    啟用和�用 shell 的內建指令。�用使您能夠執行一個和內建\n"
+"    指令���碟上的指令，而無須使用完整的路徑�。\n"
+"    \n"
+"    \n"
+"    �項：\n"
+"      -a\t�出一個內建的列表，並顯示其中�一個是�啟用\n"
+"      -n\t�用�一個 <�稱> 內建或者顯示一個被�用的內建列表\n"
+"      -p\t以��用的格��出一個內建的列表\n"
+"      -s\t僅�出 Posix「special� 內建的�稱\n"
+"    \n"
+"    控制動態載入的�項：\n"
+"      -f\t從共享物件 <檔�> 檔案中載入 <�稱> 內建\n"
+"      -d\t刪除以 -f �項載入的內建\n"
+"    \n"
+"    �帶�項時，�一個 <�稱> 內建都被啟用。\n"
+"    \n"
+"    如果�使用 $PATH 中找到的「test�而�是 shell 內建物件的版本，\n"
+"    輸入「enable -n test�。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功，除� <�稱> �是一個 shell 內建物件或者有錯誤發生。"
+
+#: builtins.c:640
+msgid ""
+"Execute arguments as a shell command.\n"
+"    \n"
+"    Combine ARGs into a single string, use the result as input to the "
+"shell,\n"
+"    and execute the resulting commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns exit status of command or success if command is null."
+msgstr ""
+"將�數�為 shell 指令執行。\n"
+"    \n"
+"    將 <�數> ��一個字串，用�果�為 shell 的輸入，\n"
+"    並且執行得到的指令。\n"
+"    \n"
+"    退出狀態：\n"
+"    以指令的狀態退出，或者在指令為空的情�下回傳�功。"
+
+#: builtins.c:652
+#, fuzzy
+msgid ""
+"Parse option arguments.\n"
+"    \n"
+"    Getopts is used by shell procedures to parse positional parameters\n"
+"    as options.\n"
+"    \n"
+"    OPTSTRING contains the option letters to be recognized; if a letter\n"
+"    is followed by a colon, the option is expected to have an argument,\n"
+"    which should be separated from it by white space.\n"
+"    \n"
+"    Each time it is invoked, getopts will place the next option in the\n"
+"    shell variable $name, initializing name if it does not exist, and\n"
+"    the index of the next argument to be processed into the shell\n"
+"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
+"    a shell script is invoked.  When an option requires an argument,\n"
+"    getopts places that argument into the shell variable OPTARG.\n"
+"    \n"
+"    getopts reports errors in one of two ways.  If the first character\n"
+"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
+"    this mode, no error messages are printed.  If an invalid option is\n"
+"    seen, getopts places the option character found into OPTARG.  If a\n"
+"    required argument is not found, getopts places a ':' into NAME and\n"
+"    sets OPTARG to the option character found.  If getopts is not in\n"
+"    silent mode, and an invalid option is seen, getopts places '?' into\n"
+"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
+"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+"    printed.\n"
+"    \n"
+"    If the shell variable OPTERR has the value 0, getopts disables the\n"
+"    printing of error messages, even if the first character of\n"
+"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
+"    \n"
+"    Getopts normally parses the positional parameters, but if arguments\n"
+"    are supplied as ARG values, they are parsed instead.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if an option is found; fails if the end of options is\n"
+"    encountered or an error occurs."
+msgstr ""
+"解��項�數。\n"
+"    \n"
+"    Getopts 被 shell �程用於解��定�的�數�為�項。\n"
+"    \n"
+"    \n"
+"    <�項字串> 字串包�待識別的�項字�；如果一個字�後�跟\n"
+"    著分號，則該�項需�一個�數，而該�數應用空格與�項分開。\n"
+"    \n"
+"    \n"
+"    �次啟動時，getopts 會將下一個�項放到 shell 變數 $name\n"
+"    中，如果 name 變數�存在則先將其�始化，而下一個待處\n"
+"    �的�數�號放入 shell 變數 OPTIND 中。OPTIND 變數在�\n"
+"    次 shell 或者 shell 指令稿啟動時都被�始化為 1。當一個�項�\n"
+"    求有一個�數時，getopts 將�數放入 shell 變數 OPTARG\n"
+"    中。\n"
+"    \n"
+"    getopts 有兩種通報錯誤的方法。如果 <�項字串> 變數的第\n"
+"    一個字元是冒號，getopts 使用沉默錯誤通報。在這種模�\n"
+"    下，�會�發生錯誤誤訊�。如果看到了一個無效的�項，\n"
+"    getopts 將找到的�項字元放至 OPTARG 變數中。如果一個必\n"
+"    須的�項沒有找到，getopts 放一個「:�到 <�稱> 變數中並且設\n"
+"    置 OPTARG 變數為找到的�項字元。如果 getopts �在沉默模\n"
+"    �中，並且�到了一個無效的�項，getopts 放置一個「?�到 <�稱> \n"
+"    變數中並且�消設定 OPTARG 變數。如果必須的�項沒有找到，\n"
+"    一個「?�會被放入 <�稱> 變數中，OPTARG 將被�消設定，並且會\n"
+"    �出一個診斷資訊。\n"
+"    \n"
+"    如果 shell 變數 OPTERR 的值為 0，getopts �用\n"
+"    錯誤資訊的�出，�使 <�項字串> 變數的第一個字元�是一\n"
+"    個冒號。OPTERR 的�設值為 1。\n"
+"    \n"
+"    Getopts 通常解��定�的�數($0 - $9)，��如果�供了\n"
+"    更多的�數，它們�而會被解�。\n"
+"    \n"
+"    退出狀態：\n"
+"    如果一個�項被找到則回傳�功；如果�到了�項的�尾或者\n"
+"    有錯誤發生則回傳失敗。"
+
+#: builtins.c:694
+msgid ""
+"Replace the shell with the given command.\n"
+"    \n"
+"    Execute COMMAND, replacing this shell with the specified program.\n"
+"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
+"specified,\n"
+"    any redirections take effect in the current shell.\n"
+"    \n"
+"    Options:\n"
+"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
+"      -c\texecute COMMAND with an empty environment\n"
+"      -l\tplace a dash in the zeroth argument to COMMAND\n"
+"    \n"
+"    If the command cannot be executed, a non-interactive shell exits, "
+"unless\n"
+"    the shell option `execfail' is set.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless COMMAND is not found or a redirection error "
+"occurs."
+msgstr ""
+"使用指定指令�代 shell。\n"
+"    \n"
+"    執行 COMMAND 指令，以指定的程��代這個 shell。\n"
+"    ARGUMENTS �數�為 COMMAND 指令的�數。如果\n"
+"    沒有指定 COMMAND 指令，則任何的�定�在目� shell 中生效。\n"
+"    \n"
+"    �項：\n"
+"      -a �稱\t�為第 0 個�數傳�給 COMMAND 指令\n"
+"      -c\t\t在空環境中執行 COMMAND 指令\n"
+"      -l\t\t在 COMMAND 指令的第 0 個�數中加一個短線\n"
+"    \n"
+"    如果指令�能被執行，則退出一個�互動�的 shell，除�\n"
+"   shell �項「execfail�已經設定。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功除� COMMAND 指令沒有找到或者出�一個�定�錯誤。"
+
+#: builtins.c:715
+msgid ""
+"Exit the shell.\n"
+"    \n"
+"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
+"    is that of the last command executed."
+msgstr ""
+"退出 shell。\n"
+"    \n"
+"    以狀態 N 退出 shell。  如果 N 被�略，則退出狀態\n"
+"    為最後一個執行指令的退出狀態。"
+
+#: builtins.c:724
+msgid ""
+"Exit a login shell.\n"
+"    \n"
+"    Exits a login shell with exit status N.  Returns an error if not "
+"executed\n"
+"    in a login shell."
+msgstr ""
+"退出一個登入 shell。\n"
+"    \n"
+"    以狀態 N 退出一個登入 shell。如果�在登入 shell 中執行，則\n"
+"    回傳一個錯誤。"
+
+#: builtins.c:734
+msgid ""
+"Display or execute commands from the history list.\n"
+"    \n"
+"    fc is used to list or edit and re-execute commands from the history "
+"list.\n"
+"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+"    string, which means the most recent command beginning with that\n"
+"    string.\n"
+"    \n"
+"    Options:\n"
+"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
+"EDITOR,\n"
+"    \t\tthen vi\n"
+"      -l \tlist lines instead of editing\n"
+"      -n\tomit line numbers when listing\n"
+"      -r\treverse the order of the lines (newest listed first)\n"
+"    \n"
+"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+"    re-executed after the substitution OLD=NEW is performed.\n"
+"    \n"
+"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+"    runs the last command beginning with `cc' and typing `r' re-executes\n"
+"    the last command.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success or status of executed command; non-zero if an error "
+"occurs."
+msgstr ""
+"從歷�記錄列表中顯示或者執行指令。\n"
+"    \n"
+"    fc 被用於從歷�記錄列表中列出或者�新編輯並執行指令。\n"
+"    FIRST 和 LAST 變數�以是數字用於指定範�，或者 FIRST �以是\n"
+"    字串，�味著以這個字串開頭的最近一個指令。\n"
+"    \n"
+"    \n"
+"    �項：\n"
+"      -e ENAME\t�擇使用哪個編輯器。�設的是 FCEDIT，然後是 EDITOR，\n"
+"    \t\t然後是 vi\n"
+"      -l \t列出列而�編輯\n"
+"      -n\t列舉時�略列號\n"
+"      -r\t�轉列的順�(最新列在�)\n"
+"    \n"
+"    用「fc -s [模�=�代 …] [指令]�的格�，COMMAND 指令會在 OLD=NEW\n"
+"    �代之後被�新執行。\n"
+"    \n"
+"    r=「fc -s�是一個有用的別�，這樣的話輸入「r cc�會執行最後一個以「cc�\n"
+"    開頭的指令，輸入「r�會�新執行最後一個指令。\n"
+"    \n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功，或者執行指令的狀態；如果錯誤發生則回傳�零。"
+
+#: builtins.c:764
+msgid ""
+"Move job to the foreground.\n"
+"    \n"
+"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
+"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
+"    current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+"將工作移至�臺。\n"
+"    \n"
+"    將以 JOB_SPEC 識別的工作放至�臺，使其�為\n"
+"    目�工作。如果 JOB_SPEC �存在，shell 觀念中的目�工作 \n"
+"    將被使用。\n"
+"    \n"
+"    退出狀態：\n"
+"    放至�臺的指令狀態，或者當錯誤發生時為失敗。"
+
+#: builtins.c:779
+msgid ""
+"Move jobs to the background.\n"
+"    \n"
+"    Place the jobs identified by each JOB_SPEC in the background, as if "
+"they\n"
+"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
+"notion\n"
+"    of the current job is used.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"移動工作至後臺。\n"
+"    \n"
+"    將 JOB_SPEC 識別的工作放至後臺，就�它們\n"
+"    是帶「&�啟動的一樣。如果 JOB_SPEC �存在，shell 觀念中的\n"
+"    目�工作將會被使用。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功除�工作管�沒有啟用或者錯誤發生。"
+
+#: builtins.c:793
+msgid ""
+"Remember or display program locations.\n"
+"    \n"
+"    Determine and remember the full pathname of each command NAME.  If\n"
+"    no arguments are given, information about remembered commands is "
+"displayed.\n"
+"    \n"
+"    Options:\n"
+"      -d\tforget the remembered location of each NAME\n"
+"      -l\tdisplay in a format that may be reused as input\n"
+"      -p pathname\tuse PATHNAME as the full pathname of NAME\n"
+"      -r\tforget all remembered locations\n"
+"      -t\tprint the remembered location of each NAME, preceding\n"
+"    \t\teach location with the corresponding NAME if multiple\n"
+"    \t\tNAMEs are given\n"
+"    Arguments:\n"
+"      NAME\tEach NAME is searched for in $PATH and added to the list\n"
+"    \t\tof remembered commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+"記�或顯示程��置。\n"
+"    \n"
+"    確定並記��一個指定 <�稱> 指令的完整路徑。\n"
+"    如果��供�數，則顯示已經記�指令的資訊。\n"
+"    \n"
+"    �項：\n"
+"      -d\t\t忘記�一個已經記�的 <�稱> 的�置\n"
+"      -l\t\t以��為輸入�用的格�顯示\n"
+"      -p pathname\t使用 pathname 路徑�為 <�稱> 指令的全路徑\n"
+"      -r\t\t忘記所有記�的�置\n"
+"      -t\t\t�出記�的�一個 <�稱> 的�置，如果指定了多個\n"
+"    \t\t<�稱>，則�個�置��會加上相應的 <�稱> \n"
+"    \t\t\n"
+"    �數：\n"
+"      <�稱>\t\t�個 <�稱> 會在 $PATH 路徑變數中被�尋，並且新增到記�的指"
+"令\n"
+"    列表中。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功，除� <�稱> 指令沒有找到或者使用了無效的�項。"
+
+#: builtins.c:818
+msgid ""
+"Display information about builtin commands.\n"
+"    \n"
+"    Displays brief summaries of builtin commands.  If PATTERN is\n"
+"    specified, gives detailed help on all commands matching PATTERN,\n"
+"    otherwise the list of help topics is printed.\n"
+"    \n"
+"    Options:\n"
+"      -d\toutput short description for each topic\n"
+"      -m\tdisplay usage in pseudo-manpage format\n"
+"      -s\toutput only a short usage synopsis for each topic matching\n"
+"    \t\tPATTERN\n"
+"    \n"
+"    Arguments:\n"
+"      PATTERN\tPattern specifying a help topic\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless PATTERN is not found or an invalid option is "
+"given."
+msgstr ""
+"顯示內建指令的相關資訊。\n"
+"    \n"
+"    顯示內建指令的簡略資訊。如果指定了 PATTERN 模�，\n"
+"    給出所有符� PATTERN 模�指令的詳細說明，�則�出\n"
+"    一個說明主題列表\n"
+"    \n"
+"    �項：\n"
+"      -d\t輸出�個主題的簡短�述\n"
+"      -m\t以� man 手冊的格�顯示使用方法\n"
+"      -s\t為�一個符� PATTERN 模�的主題僅顯示一個用法\n"
+"    \t簡介\n"
+"    \n"
+"    �數：\n"
+"      PATTERN\tPattern 模�指定一個說明主題\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功，除� PATTERN 模�沒有找到或者使用了無效�項。"
+
+#: builtins.c:842
+msgid ""
+"Display or manipulate the history list.\n"
+"    \n"
+"    Display the history list with line numbers, prefixing each modified\n"
+"    entry with a `*'.  An argument of N lists only the last N entries.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the history list by deleting all of the entries\n"
+"      -d offset\tdelete the history entry at position OFFSET. Negative\n"
+"    \t\toffsets count back from the end of the history list\n"
+"    \n"
+"      -a\tappend history lines from this session to the history file\n"
+"      -n\tread all history lines not already read from the history file\n"
+"    \t\tand append them to the history list\n"
+"      -r\tread the history file and append the contents to the history\n"
+"    \t\tlist\n"
+"      -w\twrite the current history to the history file\n"
+"    \n"
+"      -p\tperform history expansion on each ARG and display the result\n"
+"    \t\twithout storing it in the history list\n"
+"      -s\tappend the ARGs to the history list as a single entry\n"
+"    \n"
+"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
+"    if HISTFILE has a value, that is used, else ~/.bash_history.\n"
+"    \n"
+"    If the HISTTIMEFORMAT variable is set and not null, its value is used\n"
+"    as a format string for strftime(3) to print the time stamp associated\n"
+"    with each displayed history entry.  No time stamps are printed "
+"otherwise.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"顯示或�縱歷�記錄列表。\n"
+"    \n"
+"    帶列號顯示歷�記錄列表，將�個被修改的�目加上字首「*�。\n"
+"    �數 N 會僅列出最後的 N 個�目。\n"
+"    \n"
+"    �項：\n"
+"      -c\t刪除所有�目從而清空歷�記錄列表。\n"
+"      -d �移�\t從指定�置刪除歷�記錄列表。負數�移�會從歷�記錄列表\n"
+"    \t\t的尾端數回來。\n"
+"    \n"
+"      -a\t將目�工作階段的歷�記錄列追加到歷�記錄檔案中\n"
+"      -n\t從歷�記錄檔案中讀�所有未被讀�的列\n"
+"\t\t並且將它們追加到歷�列表      -r\t讀�歷�記錄檔案並將內容追加到歷�記錄"
+"列表中\n"
+"      -w\t將目�歷�記錄寫入到歷�記錄檔案中，並追加到歷�記錄列表中\n"
+"    \n"
+"      -p\t��一個 <�數> 展開歷�記錄並顯示�果，而�儲存到歷�記錄列表中\n"
+"      -s\t以單�紀錄追加 <�數> 到歷�記錄列表中\n"
+"    \n"
+"    如果指定了 <檔�>，則它將被�為歷�記錄檔案。�則\n"
+"    如果 $HISTFILE 變數有值的話使用之，�然使用 ~/.bash_history 檔案。\n"
+"    \n"
+"    如果 $HISTTIMEFORMAT 變數被設定並且�為空，它的值會被用於\n"
+"    strftime(3) 的格�字串來�出與�一個顯示的歷�記錄�目想關�的時\n"
+"    間戳，�則��出時間戳。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功，除�使用了無效的�項或者發生錯誤。"
+
+#: builtins.c:879
+msgid ""
+"Display status of jobs.\n"
+"    \n"
+"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
+"    Without options, the status of all active jobs is displayed.\n"
+"    \n"
+"    Options:\n"
+"      -l\tlists process IDs in addition to the normal information\n"
+"      -n\tlists only processes that have changed status since the last\n"
+"    \t\tnotification\n"
+"      -p\tlists process IDs only\n"
+"      -r\trestrict output to running jobs\n"
+"      -s\trestrict output to stopped jobs\n"
+"    \n"
+"    If -x is supplied, COMMAND is run after all job specifications that\n"
+"    appear in ARGS have been replaced with the process ID of that job's\n"
+"    process group leader.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs.\n"
+"    If -x is used, returns the exit status of COMMAND."
+msgstr ""
+"顯示工作狀態。\n"
+"    \n"
+"    列出活動的工作。JOBSPEC �制僅輸出指定的工作。\n"
+"    �帶�項時，所有活動工作的狀態都會顯示。\n"
+"    \n"
+"    �項：\n"
+"      -l\t在正常資訊基礎上列出行程識別碼\n"
+"      -n\t僅列出上次通告之後變更了狀態的行程\n"
+"      -p\t僅列出行程識別碼\n"
+"      -r\t�制僅輸出執行中的工作\n"
+"      -s\t�制僅輸出�止的工作\n"
+"    \n"
+"    如果使用了 -x �項，<�數> 中的所有工作�格會被�代為該工作\n"
+"    的行程群組首領的行程識別碼，然後執行 COMMAND 指令。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功，除�使用了無效的�項或者有錯誤發生。\n"
+"    如果使用 -x �項，則回傳 COMMAND 指令的退出狀態。"
+
+#: builtins.c:906
+msgid ""
+"Remove jobs from current shell.\n"
+"    \n"
+"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
+"    any JOBSPECs, the shell uses its notion of the current job.\n"
+"    \n"
+"    Options:\n"
+"      -a\tremove all jobs if JOBSPEC is not supplied\n"
+"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+"    \t\tshell receives a SIGHUP\n"
+"      -r\tremove only running jobs\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+"從目� shell 中刪除工作。\n"
+"    \n"
+"    從活動工作表中刪除�一個 JOBSPEC �數。�帶任何\n"
+"    JOBSPEC �數時，shell 使用觀念中的目�工作。\n"
+"    \n"
+"    �項：\n"
+"      -a\t如果��供 JOBSPEC �數，則刪除所有工作\n"
+"      -h\t識別�個 JOBSPEC 工作，從而當 shell 接收到 SIGHUP\n"
+"    \t訊號時�傳� SIGHUP 給指定工作\n"
+"      -r\t僅刪除執行中的工作\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功除�使用了無效的�項或者 JOBSPEC �格。"
+
+#: builtins.c:925
+msgid ""
+"Send a signal to a job.\n"
+"    \n"
+"    Send the processes identified by PID or JOBSPEC the signal named by\n"
+"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
+"    SIGTERM is assumed.\n"
+"    \n"
+"    Options:\n"
+"      -s sig\tSIG is a signal name\n"
+"      -n sig\tSIG is a signal number\n"
+"      -l\tlist the signal names; if arguments follow `-l' they are\n"
+"    \t\tassumed to be signal numbers for which names should be listed\n"
+"      -L\tsynonym for -l\n"
+"    \n"
+"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+"    instead of process IDs, and allows processes to be killed if the limit\n"
+"    on processes that you can create is reached.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+"�一個工作傳�一個訊號。\n"
+"    \n"
+"    �以 PID 行程識別碼或者 JOBSPEC 工作�格指定的行程傳�一個以\n"
+"    SIGSPEC 訊號�格或 SIGNUM 訊號編號命�的訊號。如果沒有指定\n"
+"    SIGSPEC 或 SIGNUM，那麼�定傳� SIGTERM 訊號。\n"
+"    \n"
+"    �項：\n"
+"      -s sig\tSIG 是訊號�稱\n"
+"      -n sig\tSIG 是訊號編號\n"
+"      -l\t列出訊號�稱；如果�數後跟「-l�則被�設為訊號編號，\n"
+"    \t而相應的訊號�稱會被列出\n"
+"    \n"
+"    Kill �為 shell 內建物件有兩個�由：它�許使用工作編號而�是行程識別"
+"碼，\n"
+"    並且在�以建立的行程數上��到時�許行程被�除。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功，除�使用了無效的�項或者有錯誤發生。"
+
+#: builtins.c:949
+msgid ""
+"Evaluate arithmetic expressions.\n"
+"    \n"
+"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
+"    fixed-width integers with no check for overflow, though division by 0\n"
+"    is trapped and flagged as an error.  The following list of operators is\n"
+"    grouped into levels of equal-precedence operators.  The levels are "
+"listed\n"
+"    in order of decreasing precedence.\n"
+"    \n"
+"    \tid++, id--\tvariable post-increment, post-decrement\n"
+"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
+"    \t-, +\t\tunary minus, plus\n"
+"    \t!, ~\t\tlogical and bitwise negation\n"
+"    \t**\t\texponentiation\n"
+"    \t*, /, %\t\tmultiplication, division, remainder\n"
+"    \t+, -\t\taddition, subtraction\n"
+"    \t<<, >>\t\tleft and right bitwise shifts\n"
+"    \t<=, >=, <, >\tcomparison\n"
+"    \t==, !=\t\tequality, inequality\n"
+"    \t&\t\tbitwise AND\n"
+"    \t^\t\tbitwise XOR\n"
+"    \t|\t\tbitwise OR\n"
+"    \t&&\t\tlogical AND\n"
+"    \t||\t\tlogical OR\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\tconditional operator\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\tassignment\n"
+"    \n"
+"    Shell variables are allowed as operands.  The name of the variable\n"
+"    is replaced by its value (coerced to a fixed-width integer) within\n"
+"    an expression.  The variable need not have its integer attribute\n"
+"    turned on to be used in an expression.\n"
+"    \n"
+"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
+"    parentheses are evaluated first and may override the precedence\n"
+"    rules above.\n"
+"    \n"
+"    Exit Status:\n"
+"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+"求值算術表示�。\n"
+"    \n"
+"    將�個 <�數> �為算術表示�來求值。求值的計算以定寬的整\n"
+"    數完�，�帶溢�檢測，��除 0 是被置陷阱的並且會報一個錯\n"
+"    誤。下列�算�被按照相�的算術優先順�組�。列表的順�按照\n"
+"    優先順�從高至低。\n"
+"    \n"
+"    \n"
+"    \tid++, id--\t變數後置加，後置減\n"
+"    \t++id, --id\t變數�置加，�置減\n"
+"    \t-, +\t\t一元減法，一元加法\n"
+"    \t!, ~\t\t�輯和���\n"
+"    \t**\t\t指數\n"
+"    \t*, /, %\t\t乘法，除法，�餘數\n"
+"    \t+, -\t\t增加，減少\n"
+"    \t<<, >>\t\t�左和��按�移�\n"
+"    \t<=, >=, <, >\t比較\n"
+"    \t==, !=\t\t等於，�等於\n"
+"    \t&\t\t按�與\n"
+"    \t^\t\t按�異或\n"
+"    \t|\t\t按�或\n"
+"    \t&&\t\t�輯與\n"
+"    \t||\t\t�輯或\n"
+"    \texpr ? expr : expr\n"
+"    \t\t\t�件�算�\n"
+"    \t=, *=, /=, %=,\n"
+"    \t+=, -=, <<=, >>=,\n"
+"    \t&=, ^=, |=\t指派\n"
+"    \n"
+"    Shell 變數�許�為�算元。表示�中的變數�稱會以值�代\n"
+"    (強制轉�為定寬的整數)。表示�中的變數�需�開啟整數屬性。\n"
+"    \n"
+"    �算�按照優先順�進行求值。括號中的�表示�將被先求值，並��代上述表示"
+"��則。\n"
+"    \n"
+"    退出狀態：\n"
+"    如果最後一個 <�數> 求值為 0，則 let 回傳 1；�則 let 回傳 0。"
+
+#: builtins.c:994
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+"    \n"
+"    Reads a single line from the standard input, or from file descriptor FD\n"
+"    if the -u option is supplied.  The line is split into fields as with "
+"word\n"
+"    splitting, and the first word is assigned to the first NAME, the second\n"
+"    word to the second NAME, and so on, with any leftover words assigned to\n"
+"    the last NAME.  Only the characters found in $IFS are recognized as "
+"word\n"
+"    delimiters.\n"
+"    \n"
+"    If no NAMEs are supplied, the line read is stored in the REPLY "
+"variable.\n"
+"    \n"
+"    Options:\n"
+"      -a array\tassign the words read to sequential indices of the array\n"
+"    \t\tvariable ARRAY, starting at zero\n"
+"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
+"    \t\tthan newline\n"
+"      -e\tuse Readline to obtain the line\n"
+"      -i text\tuse TEXT as the initial text for Readline\n"
+"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+"    \t\tfor a newline, but honor a delimiter if fewer than\n"
+"    \t\tNCHARS characters are read before the delimiter\n"
+"      -N nchars\treturn only after reading exactly NCHARS characters, "
+"unless\n"
+"    \t\tEOF is encountered or read times out, ignoring any\n"
+"    \t\tdelimiter\n"
+"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
+"    \t\tattempting to read\n"
+"      -r\tdo not allow backslashes to escape any characters\n"
+"      -s\tdo not echo input coming from a terminal\n"
+"      -t timeout\ttime out and return failure if a complete line of\n"
+"    \t\tinput is not read within TIMEOUT seconds.  The value of the\n"
+"    \t\tTMOUT variable is the default timeout.  TIMEOUT may be a\n"
+"    \t\tfractional number.  If TIMEOUT is 0, read returns\n"
+"    \t\timmediately, without trying to read any data, returning\n"
+"    \t\tsuccess only if input is available on the specified\n"
+"    \t\tfile descriptor.  The exit status is greater than 128\n"
+"    \t\tif the timeout is exceeded\n"
+"      -u fd\tread from file descriptor FD instead of the standard input\n"
+"    \n"
+"    Exit Status:\n"
+"    The return code is zero, unless end-of-file is encountered, read times "
+"out\n"
+"    (in which case it's greater than 128), a variable assignment error "
+"occurs,\n"
+"    or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+"從標準輸入讀�一列並將其分為��的�域。\n"
+"    \n"
+"    從標準輸入讀�單�的一列，或者如果使用了 -u �項，從檔案�述符 FD 中讀"
+"�。\n"
+"    該列被分割��域，如�字詞分割一樣，並且第一個字詞被指派給第一個 <�稱> "
+"變數，第二\n"
+"    個字詞被指派給第二個 <�稱> 變數，如此繼續，直到剩下所有的字詞被指派給最"
+"後一個 <�稱>\n"
+"    變數。�有 $IFS 變數中的字元被��是字詞分隔符。\n"
+"    \n"
+"    如果沒有�供 <�稱> 變數，則讀�的列被存放在 REPLY 變數中。\n"
+"    \n"
+"    �項：\n"
+"      -a array\t將字詞指派給 ARRAY 陣列變數的�列索引�員，從零開始。\n"
+"      -d delim\t�續讀�直到讀入 DELIM 變數中的第一個字元，而�是�列符\n"
+"      -e\t使用 Readline �得列\n"
+"      -i text\t使用 TEXT 文字�為 Readline 的�始文字\n"
+"      -n nchars\t讀� nchars 個字元之後回傳，而�是等到讀��列符。\n"
+"    \t\t但是分隔符�然有效，如果�到分隔符之�讀�了�足 nchars 個字元。\n"
+"      -N nchars\t在準確讀�了 nchars 個字元之後回傳，除��到檔案��符或者讀"
+"�逾時，\n"
+"    \t\t任何的分隔符都被忽略\n"
+"      -p prompt\t在嘗試讀�之�輸出 PROMPT �示符並且�帶\n"
+"    \t\t�列符\n"
+"      -r\t��許�斜線逸出任何字元\n"
+"      -s\t�顯示終端的任何輸入\n"
+"      -t timeout\t如果在 TIMEOUT 秒內沒有讀�一個完整的列則逾時並且回傳失"
+"敗。\n"
+"    \t\tTMOUT 變數的值是�設逾時時間。\n"
+"    \t\tTIMEOUT �以是�數。如果 TIMEOUT 是 0，那麼僅當在指定的檔案�述符上\n"
+"    \t\t輸入有效的時候，read �回傳�功。\n"
+"    \t\t如果超�了逾時時間，則回傳狀態碼大於 128\n"
+"      -u fd\t從檔案�述符 FD 中讀�，而�是標準輸入\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳碼為零，除��到了檔案��符，讀�逾時，或者無效的文\n"
+"    件�述符�為�數傳�給了 -u �項。"
+
+#: builtins.c:1041
+msgid ""
+"Return from a shell function.\n"
+"    \n"
+"    Causes a function or sourced script to exit with the return value\n"
+"    specified by N.  If N is omitted, the return status is that of the\n"
+"    last command executed within the function or script.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+"從一個 shell 函數回傳。\n"
+"    \n"
+"    使一個函數或者被引用的指令稿以指定的回傳值 N 退出。\n"
+"    如果 N 被�略，則回傳狀態就是\n"
+"    函數或指令稿中的最後一個執行指令的狀態。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳 N，或者如果 shell �在執行一個函數或引用指令稿時，失敗。"
+
+#: builtins.c:1054
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+"    \n"
+"    Change the value of shell attributes and positional parameters, or\n"
+"    display the names and values of shell variables.\n"
+"    \n"
+"    Options:\n"
+"      -a  Mark variables which are modified or created for export.\n"
+"      -b  Notify of job termination immediately.\n"
+"      -e  Exit immediately if a command exits with a non-zero status.\n"
+"      -f  Disable file name generation (globbing).\n"
+"      -h  Remember the location of commands as they are looked up.\n"
+"      -k  All assignment arguments are placed in the environment for a\n"
+"          command, not just those that precede the command name.\n"
+"      -m  Job control is enabled.\n"
+"      -n  Read commands but do not execute them.\n"
+"      -o option-name\n"
+"          Set the variable corresponding to option-name:\n"
+"              allexport    same as -a\n"
+"              braceexpand  same as -B\n"
+"              emacs        use an emacs-style line editing interface\n"
+"              errexit      same as -e\n"
+"              errtrace     same as -E\n"
+"              functrace    same as -T\n"
+"              hashall      same as -h\n"
+"              histexpand   same as -H\n"
+"              history      enable command history\n"
+"              ignoreeof    the shell will not exit upon reading EOF\n"
+"              interactive-comments\n"
+"                           allow comments to appear in interactive commands\n"
+"              keyword      same as -k\n"
+"              monitor      same as -m\n"
+"              noclobber    same as -C\n"
+"              noexec       same as -n\n"
+"              noglob       same as -f\n"
+"              nolog        currently accepted but ignored\n"
+"              notify       same as -b\n"
+"              nounset      same as -u\n"
+"              onecmd       same as -t\n"
+"              physical     same as -P\n"
+"              pipefail     the return value of a pipeline is the status of\n"
+"                           the last command to exit with a non-zero status,\n"
+"                           or zero if no command exited with a non-zero "
+"status\n"
+"              posix        change the behavior of bash where the default\n"
+"                           operation differs from the Posix standard to\n"
+"                           match the standard\n"
+"              privileged   same as -p\n"
+"              verbose      same as -v\n"
+"              vi           use a vi-style line editing interface\n"
+"              xtrace       same as -x\n"
+"      -p  Turned on whenever the real and effective user ids do not match.\n"
+"          Disables processing of the $ENV file and importing of shell\n"
+"          functions.  Turning this option off causes the effective uid and\n"
+"          gid to be set to the real uid and gid.\n"
+"      -t  Exit after reading and executing one command.\n"
+"      -u  Treat unset variables as an error when substituting.\n"
+"      -v  Print shell input lines as they are read.\n"
+"      -x  Print commands and their arguments as they are executed.\n"
+"      -B  the shell will perform brace expansion\n"
+"      -C  If set, disallow existing regular files to be overwritten\n"
+"          by redirection of output.\n"
+"      -E  If set, the ERR trap is inherited by shell functions.\n"
+"      -H  Enable ! style history substitution.  This flag is on\n"
+"          by default when the shell is interactive.\n"
+"      -P  If set, do not resolve symbolic links when executing commands\n"
+"          such as cd which change the current directory.\n"
+"      -T  If set, the DEBUG and RETURN traps are inherited by shell "
+"functions.\n"
+"      --  Assign any remaining arguments to the positional parameters.\n"
+"          If there are no remaining arguments, the positional parameters\n"
+"          are unset.\n"
+"      -   Assign any remaining arguments to the positional parameters.\n"
+"          The -x and -v options are turned off.\n"
+"    \n"
+"    Using + rather than - causes these flags to be turned off.  The\n"
+"    flags can also be used upon invocation of the shell.  The current\n"
+"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
+"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
+"    ARGs are given, all shell variables are printed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given."
+msgstr ""
+"設定或�消設定 shell �項和�置�數的值。\n"
+"    \n"
+"    變更 shell �項和�置�數的值，或者顯示 shell 變數的\n"
+"    �稱和值。\n"
+"    \n"
+"    �項：\n"
+"      -a  標記修改或者建立的變數為匯出。\n"
+"      -b  立�通告工作終止。\n"
+"      -e  如果一個指令以�零狀態退出，則立�退出。\n"
+"      -f  �用檔�產生(模�符�)。\n"
+"      -h  當查詢指令時記�它們的�置\n"
+"      -k  所有的指派�數被放在指令的環境中，而�僅僅是\n"
+"          指令�稱之�的�數。\n"
+"      -m  啟用工作控制。\n"
+"      -n  讀�指令但�執行\n"
+"      -o �項�\n"
+"          設定與�項��應的變數：\n"
+"              allexport    與 -a 相�\n"
+"              braceexpand  與 -B 相�\n"
+"              emacs       使用 emacs 風格的列編輯介�\n"
+"              errexit      與 -e 相�\n"
+"              errtrace     與 -E 相�\n"
+"              functrace    與 -T 相�\n"
+"              hashall      與 -h 相�\n"
+"              histexpand   與 -H 相�\n"
+"              history      啟用指令歷�記錄\n"
+"              ignoreeof    shell 讀�檔案��符時�會退出\n"
+"              interactive-comments\n"
+"                           �許在互動�指令中顯示註釋\n"
+"              keyword      與 -k 相�\n"
+"              monitor      與 -m 相�\n"
+"              noclobber    與 -C 相�\n"
+"              noexec       與 -n 相�\n"
+"              noglob       與 -f 相�\n"
+"              nolog        目��接�但是被忽略\n"
+"              notify       與 -b 相�\n"
+"              nounset      與 -u 相�\n"
+"              onecmd       與 -t 相�\n"
+"              physical     與 -P 相�\n"
+"              pipefail     管�的回傳值是最後一個�零回傳值指令的回傳�果，\n"
+"                           或者當所有指令都回傳零時也為零。\n"
+"              posix        變更�設時和 Posix 標準��的 bash 行為\n"
+"                           以符�標準\n"
+"              privileged   與 -p 相�\n"
+"              verbose      與 -v 相�\n"
+"              vi           使用 vi 風格的列編輯介�\n"
+"              xtrace       與 -x 相�\n"
+"      -p  無論何時當真實的有效使用者身分�符�時開啟。\n"
+"          �用� $ENV 檔案的處�以�匯入 shell 函數。\n"
+"          關閉此�項會導致有效的使用者編號和群組編號設定\n"
+"          為真實的使用者編號和群組編號\n"
+"      -t  讀�並執行一個指令之後退出。\n"
+"      -u  �代時將為設定的變數當�錯誤�待。\n"
+"      -v  讀� shell 輸入列時將它們�出。\n"
+"      -x  執行指令時�出它們以��數。\n"
+"      -B  shell 將執行大括號擴充套件。\n"
+"      -C  設定之後�止以�定�輸出的方�覆蓋常\n"
+"          �檔案。\n"
+"      -E  設定之後 ERR 陷阱會被 shell 函數繼承。\n"
+"      -H  啟用 ! 風格的歷�記錄�代。當 shell 是互動�的\n"
+"          時候這個識別��設開啟。\n"
+"      -P  設定之後類似 cd 的會變更目�目錄的指令嗎\n"
+"          追蹤符號連�。\n"
+"      -T  設定之後 DEBUG 和 RETURN 陷阱會被 shell 函數繼承。\n"
+"      -   任何剩餘的�數會被指派給�置�數。\n"
+"          -x 和 -v �項已關閉。\n"
+"    \n"
+"    使用 + 而�是 - 會使標誌�被關閉。標誌�也�以在\n"
+"    shell 被啟動時使用。目�的標誌�設定�以在 $- 變\n"
+"    �中找到。剩餘的 <�數> 是�置�數並且是按照\n"
+"    $1，$2，.。$n 的順�被指派的。如果沒有指定 <�數>\n"
+"    �數，則�出所有的 shell 變數。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功除�使用了無效的�數。"
+
+#: builtins.c:1139
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+"    \n"
+"    For each NAME, remove the corresponding variable or function.\n"
+"    \n"
+"    Options:\n"
+"      -f\ttreat each NAME as a shell function\n"
+"      -v\ttreat each NAME as a shell variable\n"
+"      -n\ttreat each NAME as a name reference and unset the variable itself\n"
+"    \t\trather than the variable it references\n"
+"    \n"
+"    Without options, unset first tries to unset a variable, and if that "
+"fails,\n"
+"    tries to unset a function.\n"
+"    \n"
+"    Some variables cannot be unset; also see `readonly'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+"�消設定 shell 變數和函數的值和屬性。\n"
+"    \n"
+"    ��一個 <�稱>，刪除�應的變數或函數。\n"
+"    \n"
+"    �項：\n"
+"      -f\t將�個 <�稱> 視為函數\n"
+"      -v\t將�個 <�稱> 視為變數\n"
+"      -n\t將�個 <�稱> 視為�稱引用，��消其本身而�其指�的變數\n"
+"    \n"
+"    �帶�項時，unset 首先嘗試�消設定一個變數，如果失敗，�嘗試�消設定一個"
+"函數。\n"
+"    \n"
+"    �些變數��以被�消設定；�見「readonly�。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功，除�使用了無效的�項或者 NAME �稱為唯讀。"
+
+#: builtins.c:1161
+msgid ""
+"Set export attribute for shell variables.\n"
+"    \n"
+"    Marks each NAME for automatic export to the environment of subsequently\n"
+"    executed commands.  If VALUE is supplied, assign VALUE before "
+"exporting.\n"
+"    \n"
+"    Options:\n"
+"      -f\trefer to shell functions\n"
+"      -n\tremove the export property from each NAME\n"
+"      -p\tdisplay a list of all exported variables and functions\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"為 shell 變數設定匯出屬性。\n"
+"    \n"
+"    標記�個 <�稱> 為自動匯出到後續指令執行的環境。如果�供了 VALUE\n"
+"    則匯出�將 VALUE �為指派。\n"
+"    \n"
+"    �項：\n"
+"      -f\t指 shell 函數\n"
+"      -n\t刪除�個 <�稱> 的匯出屬性\n"
+"      -p\t顯示所有匯出的變數和函數的列表\n"
+"    \n"
+"   「--�的�數�用進一步的�項處�。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功，除�使用了無效的�項或者 <�稱>。"
+
+#: builtins.c:1180
+msgid ""
+"Mark shell variables as unchangeable.\n"
+"    \n"
+"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
+"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
+"    before marking as read-only.\n"
+"    \n"
+"    Options:\n"
+"      -a\trefer to indexed array variables\n"
+"      -A\trefer to associative array variables\n"
+"      -f\trefer to shell functions\n"
+"      -p\tdisplay a list of all readonly variables or functions,\n"
+"    \t\tdepending on whether or not the -f option is given\n"
+"    \n"
+"    An argument of `--' disables further option processing.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+"標記 shell 變數為��變更。\n"
+"    \n"
+"    標記�一個 <�稱> 為唯讀；這些 <�稱> 變數的值將��以被後續的指派\n"
+"    �作所變更。如果�供了 VALUE，則在標記為唯讀之�將 VALUE 值指派給變數。\n"
+"    \n"
+"    �項：\n"
+"      -a\t指索引陣列變數\n"
+"      -A\t指關�陣列變數\n"
+"      -f\t指 shell 函數\n"
+"      -p\t顯示唯讀變數或函數列表，�決於是��供了 -f �項\n"
+"    \n"
+"   「--�的�數�用進一步的�項處�。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功，除�使用了無效的�項或者 <�稱>。"
+
+#: builtins.c:1202
+msgid ""
+"Shift positional parameters.\n"
+"    \n"
+"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
+"    not given, it is assumed to be 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless N is negative or greater than $#."
+msgstr ""
+"移��置�數。\n"
+"    \n"
+"    �新命��置�數 $N+1�$N+2 … 到 $1�$2 … 如果沒有指定 N，\n"
+"    則�設為 1。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功，除� N 為負或者大於 $#。"
+
+#: builtins.c:1214 builtins.c:1229
+msgid ""
+"Execute commands from a file in the current shell.\n"
+"    \n"
+"    Read and execute commands from FILENAME in the current shell.  The\n"
+"    entries in $PATH are used to find the directory containing FILENAME.\n"
+"    If any ARGUMENTS are supplied, they become the positional parameters\n"
+"    when FILENAME is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed in FILENAME; fails if\n"
+"    FILENAME cannot be read."
+msgstr ""
+"在目� shell 中執行一個檔案中的指令。\n"
+"    \n"
+"    在目� shell 中讀�並執行 <檔�> 檔案中的指令。$PATH 變數中的\n"
+"    �目被用於尋找包� <檔�> 檔案的目錄。如果�供了任何的 <�數>\n"
+"    �數，則它們將�為 <檔�> 檔案執行時的�置�數。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳 <檔�> 檔案中最後一個指令的狀態；如果 <檔�> 檔案��讀則失敗。"
+
+#: builtins.c:1245
+msgid ""
+"Suspend shell execution.\n"
+"    \n"
+"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+"    Unless forced, login shells cannot be suspended.\n"
+"    \n"
+"    Options:\n"
+"      -f\tforce the suspend, even if the shell is a login shell\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+"暫� shell 執行。\n"
+"    \n"
+"    暫� shell 的執行直到收到 SIGCONT 訊號。\n"
+"    登入 shell ��以被暫�，除�強制執行。\n"
+"    \n"
+"    �項：\n"
+"      -f\t強制暫�，�使是登入 shell。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功，除�沒有啟用工作控制或者有錯誤發生。"
+
+#: builtins.c:1261
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    Exits with a status of 0 (true) or 1 (false) depending on\n"
+"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
+"    expressions are often used to examine the status of a file.  There\n"
+"    are string operators and numeric comparison operators as well.\n"
+"    \n"
+"    The behavior of test depends on the number of arguments.  Read the\n"
+"    bash manual page for the complete specification.\n"
+"    \n"
+"    File operators:\n"
+"    \n"
+"      -a FILE        True if file exists.\n"
+"      -b FILE        True if file is block special.\n"
+"      -c FILE        True if file is character special.\n"
+"      -d FILE        True if file is a directory.\n"
+"      -e FILE        True if file exists.\n"
+"      -f FILE        True if file exists and is a regular file.\n"
+"      -g FILE        True if file is set-group-id.\n"
+"      -h FILE        True if file is a symbolic link.\n"
+"      -L FILE        True if file is a symbolic link.\n"
+"      -k FILE        True if file has its `sticky' bit set.\n"
+"      -p FILE        True if file is a named pipe.\n"
+"      -r FILE        True if file is readable by you.\n"
+"      -s FILE        True if file exists and is not empty.\n"
+"      -S FILE        True if file is a socket.\n"
+"      -t FD          True if FD is opened on a terminal.\n"
+"      -u FILE        True if the file is set-user-id.\n"
+"      -w FILE        True if the file is writable by you.\n"
+"      -x FILE        True if the file is executable by you.\n"
+"      -O FILE        True if the file is effectively owned by you.\n"
+"      -G FILE        True if the file is effectively owned by your group.\n"
+"      -N FILE        True if the file has been modified since it was last "
+"read.\n"
+"    \n"
+"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
+"                       modification date).\n"
+"    \n"
+"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
+"    \n"
+"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
+"    \n"
+"    String operators:\n"
+"    \n"
+"      -z STRING      True if string is empty.\n"
+"    \n"
+"      -n STRING\n"
+"         STRING      True if string is not empty.\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     True if the strings are equal.\n"
+"      STRING1 != STRING2\n"
+"                     True if the strings are not equal.\n"
+"      STRING1 < STRING2\n"
+"                     True if STRING1 sorts before STRING2 "
+"lexicographically.\n"
+"      STRING1 > STRING2\n"
+"                     True if STRING1 sorts after STRING2 lexicographically.\n"
+"    \n"
+"    Other operators:\n"
+"    \n"
+"      -o OPTION      True if the shell option OPTION is enabled.\n"
+"      -v VAR         True if the shell variable VAR is set.\n"
+"      -R VAR         True if the shell variable VAR is set and is a name\n"
+"                     reference.\n"
+"      ! EXPR         True if expr is false.\n"
+"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+"    \n"
+"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
+"                     -lt, -le, -gt, or -ge.\n"
+"    \n"
+"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+"    than ARG2.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+"    false or an invalid argument is given."
+msgstr ""
+"��件表示�進行求值。\n"
+"    \n"
+"    根據 EXPR 表示�的求值以狀態 0 (真) 或 1 (�) 退出。\n"
+"    表示��以是一元或者二元的。一元表示�通常用於檢測\n"
+"    檔案狀態。�時還有字串�算�和數字比較�算�。\n"
+"    \n"
+"    檔案�算�：\n"
+"    \n"
+"      -a 檔案        如果檔案存在則為真。\n"
+"      -b 檔案        如果檔案為�塊特殊檔案則為真。\n"
+"      -c 檔案        如果檔案為字元特殊檔案則為真。\n"
+"      -d 檔案        如果檔案為目錄則為真。\n"
+"      -e 檔案        如果檔案存在則為真。\n"
+"      -f 檔案        如果檔案存在且為一般檔案則為真。\n"
+"      -g 檔案        如果檔案的群組屬性設定開啟則為真。\n"
+"      -h 檔案        如果檔案為符號連�則為真。\n"
+"      -L 檔案        如果檔案為符號連�則為真。\n"
+"      -k 檔案        如果檔案的�著�元已設定則為真。\n"
+"      -p 檔案        如果檔案為命�管�則為真。\n"
+"      -r 檔案        如果檔案�於您是�讀的則為真。\n"
+"      -s 檔案        如果檔案存在且�為空則為真。\n"
+"      -S 檔案        如果檔案是通訊端則為真。\n"
+"      -t 檔案�述符   如果檔案�述符在終端上開啟則為真。\n"
+"      -u 檔案        如果檔案的使用者數列設定開啟則為真。\n"
+"      -w 檔案        如果檔案�您是�寫的則為真\n"
+"      -x 檔案        如果檔案�您是�執行的則為真。\n"
+"      -O 檔案        如果檔案是您所有的則為真。\n"
+"      -G 檔案        如果檔案是您的群組所有則為真。\n"
+"      -N 檔案        如果檔案上次被讀�之後修改�則為真。\n"
+"    \n"
+"      FILE1 -nt FILE2  如果 file1 檔案新於 file2 檔案則為真(根據\n"
+"                       修改日期)。\n"
+"    \n"
+"      FILE1 -ot FILE2  如果 file1 檔案舊於 file2 檔案則為真。\n"
+"    \n"
+"      FILE1 -ef FILE2  如果 file1 檔案是 file2 檔案的硬�連�則為真。\n"
+"    \n"
+"    字串�算�\n"
+"    \n"
+"      -z 字串      如果字串為空則為真。\n"
+"    \n"
+"      -n 字串\n"
+"         字串      如果字串�為空則為真。\n"
+"    \n"
+"      STRING1 = STRING2\n"
+"                     如果 string1 和 string2 字串相�則為真。\n"
+"      STRING1 != STRING2\n"
+"                     如果 string1 和 string2 字串�相�則為真。\n"
+"      STRING1 < STRING2\n"
+"                     如果按字典排� string1 在 string2 串之�則為真。\n"
+"      STRING1 > STRING2\n"
+"                     如果按字典排� string1 在 string2 串之�則為真。\n"
+"    \n"
+"    其他�算�：\n"
+"    \n"
+"      -o �項        如果指定 shell �項啟用則為真。\n"
+"      -v VAR\t 如果指定 Shell 變數 VAR 已指派則為真。\n"
+"      -R VAR\t 如果指定 Shell 變數 VAR 已指派且為�稱引用則為真。\n"
+"      ! EXPR         如果表示� expr 為�則為真。\n"
+"      EXPR1 -a EXPR2 如果 expr1 和 expr2 都為真則為真。\n"
+"      EXPR1 -o EXPR2 如果 expr1 和 expr2 有一個為真則為真。\n"
+"    \n"
+"      arg1 OP arg2   算術測試。OP �算��以是 -eq�-ne�\n"
+"                     -lt�-le�-gt�或 -ge 之一。\n"
+"    \n"
+"    二元算術�算回傳真，如果 ARG1 �數等於��等於�\n"
+"    �於��於等於�大於�或者大於等於 ARG2 �數。\n"
+"    \n"
+"    退出狀態：\n"
+"    如果 EXPR 表示�求值為真則回傳�功；如果 EXPR 表示�求值\n"
+"    為�或者使用了無效的�數則回傳失敗。"
+
+#: builtins.c:1343
+msgid ""
+"Evaluate conditional expression.\n"
+"    \n"
+"    This is a synonym for the \"test\" builtin, but the last argument must\n"
+"    be a literal `]', to match the opening `['."
+msgstr ""
+"求值�件表示�。\n"
+"    \n"
+"    是內建指令「test�的�義詞，但是最後一個�數必須是\n"
+"    字元「]�，以符�起始的「[�。"
+
+#: builtins.c:1352
+msgid ""
+"Display process times.\n"
+"    \n"
+"    Prints the accumulated user and system times for the shell and all of "
+"its\n"
+"    child processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Always succeeds."
+msgstr ""
+"顯示行程時間\n"
+"    \n"
+"    �出 shell �其所有�行程的累計使用者空間和\n"
+"    系統空間執行時間。\n"
+"    \n"
+"    退出狀態：\n"
+"    一律�功。"
+
+#: builtins.c:1364
+msgid ""
+"Trap signals and other events.\n"
+"    \n"
+"    Defines and activates handlers to be run when the shell receives "
+"signals\n"
+"    or other conditions.\n"
+"    \n"
+"    ARG is a command to be read and executed when the shell receives the\n"
+"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
+"    is supplied) or `-', each specified signal is reset to its original\n"
+"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+"    shell and by the commands it invokes.\n"
+"    \n"
+"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
+"If\n"
+"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.  "
+"If\n"
+"    a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or "
+"a\n"
+"    script run by the . or source builtins finishes executing.  A "
+"SIGNAL_SPEC\n"
+"    of ERR means to execute ARG each time a command's failure would cause "
+"the\n"
+"    shell to exit when the -e option is enabled.\n"
+"    \n"
+"    If no arguments are supplied, trap prints the list of commands "
+"associated\n"
+"    with each signal.\n"
+"    \n"
+"    Options:\n"
+"      -l\tprint a list of signal names and their corresponding numbers\n"
+"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+"    \n"
+"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
+"number.\n"
+"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
+"    signal may be sent to the shell with \"kill -signal $$\".\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless a SIGSPEC is invalid or an invalid option is "
+"given."
+msgstr ""
+"�訊號和其他事件設陷阱。\n"
+"    \n"
+"    定義一個處�器，在 shell 接收到訊號和其他�件下執行。\n"
+"    \n"
+"    <�數> 是當 shell 接收到 SIGNAL_SPEC 訊號時讀�和執行的指令。\n"
+"    如果沒有指定 <�數>  (並且�給出一個 SIGNAL_SPEC 訊號) 或者\n"
+" <�數> 為\n"
+"   「-�，�一個指定的�數會被�設為原始值。如果 <�數> 是一個空串，則�一"
+"個\n"
+"    SIGNAL_SPEC 訊號會被 shell 和它啟動的指令忽略。\n"
+"    \n"
+"    如果一個 SIGNAL_SPEC 訊號是 EXIT (0)，則 <�數> 指令會在 shell 退出時被\n"
+"    執行。如果一個 SIGNAL_SPEC 訊號是 DEBUG，則 <�數> 指令會在�一個簡單命\n"
+"    令之�執行。\n"
+"    \n"
+"    如果��供�數，trap �出列表顯示�一個與�一個訊號相關�的指令。\n"
+"    \n"
+"    �項：\n"
+"      -l\t�出一個訊號�稱和它們�應的編號列表\n"
+"      -p\t�出與�個 SIGNAL_SPEC 訊號相關�的陷阱指令\n"
+"    \n"
+"    �一個 SIGNAL_SPEC 訊號�以是 <signal.h> 中的訊號�稱或者訊號編號。\n"
+"    訊號�稱大�寫相符且�以使用 SIG 字首。訊號�用「kill - 訊號 $$�\n"
+"    傳�給 shell。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功，除�使用了無效的�項或者 SIGSPEC。"
+
+#: builtins.c:1400
+msgid ""
+"Display information about command type.\n"
+"    \n"
+"    For each NAME, indicate how it would be interpreted if used as a\n"
+"    command name.\n"
+"    \n"
+"    Options:\n"
+"      -a\tdisplay all locations containing an executable named NAME;\n"
+"    \t\tincludes aliases, builtins, and functions, if and only if\n"
+"    \t\tthe `-p' option is not also used\n"
+"      -f\tsuppress shell function lookup\n"
+"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+"    \t\tbuiltin, or function, and returns the name of the disk file\n"
+"    \t\tthat would be executed\n"
+"      -p\treturns either the name of the disk file that would be executed,\n"
+"    \t\tor nothing if `type -t NAME' would not return `file'\n"
+"      -t\toutput a single word which is one of `alias', `keyword',\n"
+"    \t\t`function', `builtin', `file' or `', if NAME is an alias,\n"
+"    \t\tshell reserved word, shell function, shell builtin, disk file,\n"
+"    \t\tor not found, respectively\n"
+"    \n"
+"    Arguments:\n"
+"      NAME\tCommand name to be interpreted.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if all of the NAMEs are found; fails if any are not "
+"found."
+msgstr ""
+"顯示指令類型的資訊。\n"
+"    \n"
+"    �於�一個 <�稱>，指示如果�為指令它將如何被解釋。\n"
+"    \n"
+"    �項：\n"
+"      -a\t顯示所有包��稱為 <�稱> 的�執行檔案的�置；\n"
+"    \t包括別��內建和函數。僅當「-p��項沒有使用時\n"
+"      -f\t抑制 shell 函數查詢\n"
+"      -P\t為�個 <�稱> 驚醒 PATH 路徑�尋，�使它是別��\n"
+"    \t內建或函數，並且回傳將被執行的�碟上檔案的�稱。\n"
+"      -p\t回傳將被執行的�碟上檔案的�稱，或者當「type -t <�稱>�\n"
+"    \t�回傳「file�時，�回傳任何值。\n"
+"      -t\t回傳下列詞中的任何一個「alias��「keyword��\n"
+"    \t「function��「builtin��「file�或者「�，如果 <�稱> 是相應的\n"
+"    \t一個別��shell �留字�shell 函數�shell 內建物件�\n"
+"    \t�碟檔案或沒有找到。\n"
+"    \n"
+"    �數：\n"
+"      <�稱>\t將�解�的指令。\n"
+"    \n"
+"    退出狀態：\n"
+"    如果所有的 <�稱> 指令都找到則回傳�功；任何找�到則失敗。"
+
+#: builtins.c:1431
+#, fuzzy
+msgid ""
+"Modify shell resource limits.\n"
+"    \n"
+"    Provides control over the resources available to the shell and "
+"processes\n"
+"    it creates, on systems that allow such control.\n"
+"    \n"
+"    Options:\n"
+"      -S\tuse the `soft' resource limit\n"
+"      -H\tuse the `hard' resource limit\n"
+"      -a\tall current limits are reported\n"
+"      -b\tthe socket buffer size\n"
+"      -c\tthe maximum size of core files created\n"
+"      -d\tthe maximum size of a process's data segment\n"
+"      -e\tthe maximum scheduling priority (`nice')\n"
+"      -f\tthe maximum size of files written by the shell and its children\n"
+"      -i\tthe maximum number of pending signals\n"
+"      -k\tthe maximum number of kqueues allocated for this process\n"
+"      -l\tthe maximum size a process may lock into memory\n"
+"      -m\tthe maximum resident set size\n"
+"      -n\tthe maximum number of open file descriptors\n"
+"      -p\tthe pipe buffer size\n"
+"      -q\tthe maximum number of bytes in POSIX message queues\n"
+"      -r\tthe maximum real-time scheduling priority\n"
+"      -s\tthe maximum stack size\n"
+"      -t\tthe maximum amount of cpu time in seconds\n"
+"      -u\tthe maximum number of user processes\n"
+"      -v\tthe size of virtual memory\n"
+"      -x\tthe maximum number of file locks\n"
+"      -P\tthe maximum number of pseudoterminals\n"
+"      -R\tthe maximum time a real-time process can run before blocking\n"
+"      -T\tthe maximum number of threads\n"
+"    \n"
+"    Not all options are available on all platforms.\n"
+"    \n"
+"    If LIMIT is given, it is the new value of the specified resource; the\n"
+"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+"    current soft limit, the current hard limit, and no limit, respectively.\n"
+"    Otherwise, the current value of the specified resource is printed.  If\n"
+"    no option is given, then -f is assumed.\n"
+"    \n"
+"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+"    number of processes.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"修改 shell 資��制。\n"
+"    \n"
+"    在�許此類控制的系統上，�供�於 shell �其建立的行程所�用的\n"
+"    資�的控制。\n"
+"    \n"
+"    �項：\n"
+"      -S\t使用軟 (「soft�) 資��制\n"
+"      -H\t使用硬 (「hard�) 資��制\n"
+"      -a\t所有目��制都被通報\n"
+"      -b\t通訊端快�尺寸\n"
+"      -c\t建立核心檔案的最大尺寸\n"
+"      -d\t一個行程的資料�最大尺寸\n"
+"      -e\t最高的排程優先順� (「nice�)\n"
+"      -f\t有 shell �其�行程�以寫入的最大檔案尺寸\n"
+"      -i\t最多�以暫�的訊號數\n"
+"      -k\t為這個進程所分�的最大 kqueues 數�\n"
+"      -l\t一個行程�以鎖定的最大記憶體尺寸\n"
+"      -m\t最大的記憶體進�尺寸\n"
+"      -n\t最多開啟的檔案�述符個數\n"
+"      -p\t管�緩��尺寸\n"
+"      -q\tPOSIX 資訊佇列的最大�元組數\n"
+"      -r\t�時排程的最大優先順�\n"
+"      -s\t最大堆疊尺寸\n"
+"      -P\t�終端的最大數�\n"
+"      -t\t最大的 CPU 時間，以秒為單�\n"
+"      -u\t最大使用者行程數\n"
+"      -v\t虛擬記憶體尺寸\n"
+"      -x\t最大的檔案鎖數�\n"
+"      -T\t最大執行緒數�\n"
+"    \n"
+"    並�所有�項在所有系統上�用。\n"
+"    \n"
+"    如果�供了 LIMIT 變數，則它為指定資�的新值；特別的 LIMIT 值為\n"
+"   「soft��「hard�和「unlimited�，分別表示目�的軟�制，硬�制和無�"
+"制。\n"
+"    �則�出指定資�的目��制值，�帶�項則�定為 -f\n"
+"    \n"
+"    �值都是 1024 �元組為單�，除了 -t 以秒為單�，-p 以 512 �元組�增，\n"
+"    -u 為無尺度的行程數�。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功，除�使用了無效的�項或者錯誤發生。"
+
+#: builtins.c:1482
+msgid ""
+"Display or set file mode mask.\n"
+"    \n"
+"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
+"    the current value of the mask.\n"
+"    \n"
+"    If MODE begins with a digit, it is interpreted as an octal number;\n"
+"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+"    \n"
+"    Options:\n"
+"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
+"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+"顯示或設定檔案模��罩。\n"
+"    \n"
+"    設定使用者檔案建立�罩為 MODE 模�。如果�略了 MODE，則\n"
+"    �出目��罩的值。\n"
+"    \n"
+"    如果 MODE 模�以數字開頭，則被當�八進�數字解�；�則是一個\n"
+"    chmod(1) �接收的符號模�串。\n"
+"    \n"
+"    �項：\n"
+"      -p\t如果�略 MDOE 模�，以��用為輸入的格�輸入\n"
+"      -S\t以符號形�輸出，�則以八進�數字格�輸出\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功，除�使用了無效的 MODE 模�或者�項。"
+
+#: builtins.c:1502
+#, fuzzy
+msgid ""
+"Wait for job completion and return exit status.\n"
+"    \n"
+"    Waits for each process identified by an ID, which may be a process ID or "
+"a\n"
+"    job specification, and reports its termination status.  If ID is not\n"
+"    given, waits for all currently active child processes, and the return\n"
+"    status is zero.  If ID is a job specification, waits for all processes\n"
+"    in that job's pipeline.\n"
+"    \n"
+"    If the -n option is supplied, waits for a single job from the list of "
+"IDs,\n"
+"    or, if no IDs are supplied, for the next job to complete and returns "
+"its\n"
+"    exit status.\n"
+"    \n"
+"    If the -p option is supplied, the process or job identifier of the job\n"
+"    for which the exit status is returned is assigned to the variable VAR\n"
+"    named by the option argument. The variable will be unset initially, "
+"before\n"
+"    any assignment. This is useful only when the -n option is supplied.\n"
+"    \n"
+"    If the -f option is supplied, and job control is enabled, waits for the\n"
+"    specified ID to terminate, instead of waiting for it to change status.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+"    option is given, or if -n is supplied and the shell has no unwaited-for\n"
+"    children."
+msgstr ""
+"等待工作完�並回傳退出狀態。\n"
+"    \n"
+"    等待以 ID 編號識別的行程，其中 ID �以是行程編號或者工作�格，\n"
+"    並通報它的終止狀態。如果 ID 沒有給出，則等待所有的目�活��\n"
+"    行程，並且回傳狀態為零。如果 ID 是工作�格，等待工作管�中的\n"
+"    所有行程。\n"
+"    \n"
+"    若指定了 -n �項，等待下一個工作完�並回傳其狀態。\n"
+"    \n"
+"    如果指定了 -f �項且啟用工作管�，則等待指定 ID 終止，而�\n"
+"    等到其變更狀態。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳最後一個 ID 行程的狀態；如果使用了無效的 ID 或者�項則失敗。"
+
+#: builtins.c:1533
+msgid ""
+"Wait for process completion and return exit status.\n"
+"    \n"
+"    Waits for each process specified by a PID and reports its termination "
+"status.\n"
+"    If PID is not given, waits for all currently active child processes,\n"
+"    and the return status is zero.  PID must be a process ID.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last PID; fails if PID is invalid or an "
+"invalid\n"
+"    option is given."
+msgstr ""
+"等待行程完�並且回傳退出狀態。\n"
+"    \n"
+"    等待指定行程並通報它的終止狀態。如果沒有�供 PID，則目�所有的活�\n"
+"    �行程都會被等待，並且回傳碼為零。PID 必須為行程識別碼。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳行程 ID 的狀態；如果 PID 是無效的行程識別碼或者指定了無效的�項則失"
+"敗。"
+
+#: builtins.c:1548
+msgid ""
+"Execute commands for each member in a list.\n"
+"    \n"
+"    The `for' loop executes a sequence of commands for each member in a\n"
+"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
+"    the COMMANDS are executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"為列表中的�個�員執行指令。\n"
+"    \n"
+"   「for�迴圈為列表中的�個�員執行一系列的指令。如果沒有\n"
+"   「in WORDS ...;�則�定使用「in \"$@\"�。�於 WORDS 中的�\n"
+"    個元素，<�稱> 被設定為該元素，並且執行 <指令>。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳最後執行指令的狀態。"
+
+#: builtins.c:1562
+msgid ""
+"Arithmetic for loop.\n"
+"    \n"
+"    Equivalent to\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\tCOMMANDS\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
+"    omitted, it behaves as if it evaluates to 1.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"算術 for 迴圈。\n"
+"    \n"
+"    等價於\n"
+"    \t(( EXP1 ))\n"
+"    \twhile (( EXP2 )); do\n"
+"    \t\t<指令>\n"
+"    \t\t(( EXP3 ))\n"
+"    \tdone\n"
+"    EXP1�EXP2 和 EXP3 都是算術表示�。如果�略任何表示�，\n"
+"    則等�於使用了求值為 1 的表示�。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳最後執行指令的狀態。"
+
+#: builtins.c:1580
+msgid ""
+"Select words from a list and execute commands.\n"
+"    \n"
+"    The WORDS are expanded, generating a list of words.  The\n"
+"    set of expanded words is printed on the standard error, each\n"
+"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
+"    is assumed.  The PS3 prompt is then displayed and a line read\n"
+"    from the standard input.  If the line consists of the number\n"
+"    corresponding to one of the displayed words, then NAME is set\n"
+"    to that word.  If the line is empty, WORDS and the prompt are\n"
+"    redisplayed.  If EOF is read, the command completes.  Any other\n"
+"    value read causes NAME to be set to null.  The line read is saved\n"
+"    in the variable REPLY.  COMMANDS are executed after each selection\n"
+"    until a break command is executed.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"從列表中��詞並且執行指令。\n"
+"    \n"
+"    WORDS 變數被展開，產生一個字詞的列表。展開的字詞集�被�出\n"
+"    在標準錯誤輸出�置上，�個以一個數字�字首。如果沒有「in WORDS�\n"
+"    則�定使用「in \"$@\"�。PS3 �示符會被顯示並且從標準輸入讀入一列\n"
+"    如果該列由被顯示字詞�應的數字組�，則 <�稱> 變數被設定為相應\n"
+"    的字詞。如果列為空，則 WORDS 變數和�示符被�新顯示。如果讀�了\n"
+"    檔案��符，則指令完�。讀入任何其他的值會導致 <�稱> 變數被設定\n"
+"    為空。讀入的列被存放在變數 REPLY 中。<指令> 在�次�擇\n"
+"    之後執行直到執行一個 break 指令。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳最後一個執行指令的狀態。"
+
+#: builtins.c:1601
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+"    \n"
+"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+"    and system CPU time spent executing PIPELINE when it terminates.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint the timing summary in the portable Posix format\n"
+"    \n"
+"    The value of the TIMEFORMAT variable is used as the output format.\n"
+"    \n"
+"    Exit Status:\n"
+"    The return status is the return status of PIPELINE."
+msgstr ""
+"通報管�執行的消耗時間。\n"
+"    \n"
+"    執行 PIPELINE 並且�出 PIPELINE 終止時實際時間�使用者 CPU 時間和系統\n"
+"    CPU 時間的總�。\n"
+"    \n"
+"    �項：\n"
+"      -p\t用�移�的 POSIX 格��出用時總�。\n"
+"    \n"
+"    TIMEFORMAT 變數的值被�為輸出格�。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳狀態� PIPELINE 的回傳狀態。"
+
+#: builtins.c:1618
+msgid ""
+"Execute commands based on pattern matching.\n"
+"    \n"
+"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
+"    `|' is used to separate multiple patterns.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"基於模�符�來執行指令。\n"
+"    \n"
+"    基於 PATTERN 模�符�的字詞 WORD，有�擇的執行 <指令>。\n"
+"   「|�用於分隔多個模�。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳最後一個執行指令的狀態。"
+
+#: builtins.c:1630
+msgid ""
+"Execute commands based on conditional.\n"
+"    \n"
+"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
+"the\n"
+"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
+"is\n"
+"    executed in turn, and if its exit status is zero, the corresponding\n"
+"    `then COMMANDS' list is executed and the if command completes.  "
+"Otherwise,\n"
+"    the `else COMMANDS' list is executed, if present.  The exit status of "
+"the\n"
+"    entire construct is the exit status of the last command executed, or "
+"zero\n"
+"    if no condition tested true.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"根據�件執行指令。\n"
+"    \n"
+"   「if <指令>�列表被執行。如果退出狀態為零，則執行「then <指令>�\n"
+"    列表。�則按順�執行�個「elif <指令>�列表，並且如果它的退出狀態為\n"
+"    零，則執行�應的「then <指令>�列表並且 if 指令終止。�則如果存在的\n"
+"    情�下，執行「else <指令>�列表。整個�構的退出狀態是最後一個執行\n"
+"    指令的狀態，或者如果沒有�件測試為真的話，則為零。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳最後一個執行指令的狀態。"
+
+#: builtins.c:1647
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `while' COMMANDS has an exit status of zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"��測試�功�執行指令。\n"
+"    \n"
+"    ��在「while�<指令> 中的最終指令回傳�果為 0，則\n"
+"    展開並執行 <指令>。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳最後一個執行指令的狀態。"
+
+#: builtins.c:1659
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+"    \n"
+"    Expand and execute COMMANDS as long as the final command in the\n"
+"    `until' COMMANDS has an exit status which is not zero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"當測試���時執行指令。\n"
+"    \n"
+"   「until�<指令> 的最終指令回傳狀態�為 0 時，\n"
+"    展開並執行 <指令>。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳最後一個執行指令的狀態。"
+
+#: builtins.c:1671
+msgid ""
+"Create a coprocess named NAME.\n"
+"    \n"
+"    Execute COMMAND asynchronously, with the standard output and standard\n"
+"    input of the command connected via a pipe to file descriptors assigned\n"
+"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+"    The default NAME is \"COPROC\".\n"
+"    \n"
+"    Exit Status:\n"
+"    The coproc command returns an exit status of 0."
+msgstr ""
+"建立一個以 <�稱> 為�的副行程。\n"
+"    \n"
+"    ��步執行 <指令>，在執行 shell 中的陣列變數 <�稱>\n"
+"    的 0 號和 1 號元素�為檔案�述符，以一個管�連接指令\n"
+"    分別�為指令的標準輸出和輸入�置。\n"
+"    �設的 <�稱> 是「COPROC�。\n"
+"    \n"
+"    退出狀態：\n"
+"    coprc 指令回傳離開代碼 0。"
+
+#: builtins.c:1685
+msgid ""
+"Define shell function.\n"
+"    \n"
+"    Create a shell function named NAME.  When invoked as a simple command,\n"
+"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
+"invoked,\n"
+"    the arguments are passed to the function as $1...$n, and the function's\n"
+"    name is in $FUNCNAME.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless NAME is readonly."
+msgstr ""
+"定義 shell 函數。\n"
+"    \n"
+"    建立一個以 <�稱> 為�的 shell 函數。當�為一個簡單的指令啟用時，\n"
+"    <�稱> 函數執行呼� shell 語境中的 COMMANDs 指令。當 <�稱>\n"
+"    被啟用時，�數�為 $1…$n 被傳�給函數，函數的�字儲存在變數\n"
+"    $FUNCNAME 中。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功除� <�稱> 為唯讀。"
+
+#: builtins.c:1699
+msgid ""
+"Group commands as a unit.\n"
+"    \n"
+"    Run a set of commands in a group.  This is one way to redirect an\n"
+"    entire set of commands.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the last command executed."
+msgstr ""
+"將指令組�為一個單元。\n"
+"    \n"
+"    執行群組中的指令集�。這是�整個指令集�\n"
+"    ��定�的方法之一。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳最後一個執行指令的狀態。"
+
+#: builtins.c:1711
+msgid ""
+"Resume job in foreground.\n"
+"    \n"
+"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
+"    stopped or background job.  JOB_SPEC can specify either a job name\n"
+"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
+"    the background, as if the job specification had been supplied as an\n"
+"    argument to `bg'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns the status of the resumed job."
+msgstr ""
+"在�臺繼續工作\n"
+"    \n"
+"    �於 JOB_SPEC �數來說和「fg�指令等�。繼續一個\n"
+"    �止的或者後臺工作。JOB_SPEC �以指定一個工作\n"
+"    �字或工作號。在 JOB_SPEC 後加上一個「&�將會把\n"
+"    工作放至後臺，就�工作�格被�為「bg�指令的�數\n"
+"    執行一樣。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳被繼續的工作狀態。"
+
+#: builtins.c:1726
+#, fuzzy
+msgid ""
+"Evaluate arithmetic expression.\n"
+"    \n"
+"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
+"    evaluation.  Equivalent to `let \"EXPRESSION\"'.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+"求值算術表示�。\n"
+"    \n"
+"    表示�按照算術法則進行求值。\n"
+"    等價於「let 表示��。\n"
+"    \n"
+"    退出狀態：\n"
+"    如果表示�求值為 0 則回傳 1；�則回傳 0。"
+
+#: builtins.c:1738
+msgid ""
+"Execute conditional command.\n"
+"    \n"
+"    Returns a status of 0 or 1 depending on the evaluation of the "
+"conditional\n"
+"    expression EXPRESSION.  Expressions are composed of the same primaries "
+"used\n"
+"    by the `test' builtin, and may be combined using the following "
+"operators:\n"
+"    \n"
+"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+"    \n"
+"    When the `==' and `!=' operators are used, the string to the right of\n"
+"    the operator is used as a pattern and pattern matching is performed.\n"
+"    When the `=~' operator is used, the string to the right of the operator\n"
+"    is matched as a regular expression.\n"
+"    \n"
+"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+"    determine the expression's value.\n"
+"    \n"
+"    Exit Status:\n"
+"    0 or 1 depending on value of EXPRESSION."
+msgstr ""
+"執行�件指令。\n"
+"    \n"
+"    根據�件表示� EXPRESSION 的求值回傳狀態 0 或 1。表示�按照\n"
+"   「test�內建的相��件組�，或者�以有下列�算�連接而�：\n"
+"    \n"
+"      ( EXPRESSION )\t回傳 EXPRESSION 表示�的值\n"
+"      ! EXPRESSION\t\t如果 EXPRESSION 表示�為�則為真，�則為�\n"
+"      EXPR1 && EXPR2\t如果 EXPR1 和 EXPR2 表示��為真則為真，�則為�\n"
+"      EXPR1 || EXPR2\t如果 EXPR1 和 EXPR2 表示�中有一個為真則為真，�則為"
+"�\n"
+"    \n"
+"    當使用「==�和「!=��算�時，�算��邊的字串被用作模�並且執行一個\n"
+"    符�。當使用「=~��算�時，�算��邊的字串被當�正�表示�來進行\n"
+"    符�。\n"
+"    \n"
+"    �算� && 和 || 將�� EXPR2 表示�進行求值，如果 EXPR1 表示�足夠確定\n"
+"    整個表示�的值。\n"
+"    \n"
+"    退出狀態：\n"
+"    根據 EXPRESSION 的值為 0 或 1。"
+
+#: builtins.c:1764
+msgid ""
+"Common shell variable names and usage.\n"
+"    \n"
+"    BASH_VERSION\tVersion information for this Bash.\n"
+"    CDPATH\tA colon-separated list of directories to search\n"
+"    \t\tfor directories given as arguments to `cd'.\n"
+"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+"    \t\tbe ignored by pathname expansion.\n"
+"    HISTFILE\tThe name of the file where your command history is stored.\n"
+"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+"    HISTSIZE\tThe maximum number of history lines that a running\n"
+"    \t\tshell can access.\n"
+"    HOME\tThe complete pathname to your login directory.\n"
+"    HOSTNAME\tThe name of the current host.\n"
+"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+"    \t\tcharacter as the sole input.  If set, then the value\n"
+"    \t\tof it is the number of EOF characters that can be seen\n"
+"    \t\tin a row on an empty line before the shell will exit\n"
+"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
+"    MACHTYPE\tA string describing the current system Bash is running on.\n"
+"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+"    \t\tfor new mail.\n"
+"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+"    PATH\tA colon-separated list of directories to search when\n"
+"    \t\tlooking for commands.\n"
+"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+"    \t\tprimary prompt.\n"
+"    PS1\t\tThe primary prompt string.\n"
+"    PS2\t\tThe secondary prompt string.\n"
+"    PWD\t\tThe full pathname of the current directory.\n"
+"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+"    TERM\tThe name of the current terminal type.\n"
+"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+"    \t\t`time' reserved word.\n"
+"    auto_resume\tNon-null means a command word appearing on a line by\n"
+"    \t\titself is first looked for in the list of currently\n"
+"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
+"    \t\tA value of `exact' means that the command word must\n"
+"    \t\texactly match a command in the list of stopped jobs.  A\n"
+"    \t\tvalue of `substring' means that the command word must\n"
+"    \t\tmatch a substring of the job.  Any other value means that\n"
+"    \t\tthe command must be a prefix of a stopped job.\n"
+"    histchars\tCharacters controlling history expansion and quick\n"
+"    \t\tsubstitution.  The first character is the history\n"
+"    \t\tsubstitution character, usually `!'.  The second is\n"
+"    \t\tthe `quick substitution' character, usually `^'.  The\n"
+"    \t\tthird is the `history comment' character, usually `#'.\n"
+"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+"    \t\tcommands should be saved on the history list.\n"
+msgstr ""
+"常用 shell 變數�稱和使用。\n"
+"    \n"
+"    BASH_VERSION\t目� Bash 的版本資訊。\n"
+"    CDPATH\t用於「cd�指令�數�尋分號分隔的目錄列表\n"
+"    GLOBIGNORE\t路徑擴充套件時忽略的檔�符�模�列表，\n"
+"    \t\t以分號分隔。\n"
+"    HISTFILE\t您的指令歷�記錄存放的檔案�稱。\n"
+"    HISTFILESIZE\t歷�記錄檔案最多�以儲存的列數。\n"
+"    HISTSIZE\t一個執行的 shell 最多�以訪�的歷�記錄指令列數。\n"
+"    HOME\t您登入目錄的完整路徑。\n"
+"    HOSTNAME\t目�主機的主機�稱。\n"
+"    HOSTTYPE\t目�版本的 BASH 在其之上執行的 CPU 類型。\n"
+"    IGNOREEOF\t控制 shell 收到檔案��符�為單一輸入後的\n"
+"    \t\t動作。如果設定這個變數，則它的值是 shell 退出之�在\n"
+"    \t\t一個空列上�以連續看到的檔案��符數�(�設為 10)。\n"
+"    \t\t未設定時，檔案��符標誌著輸入的��。\n"
+"    MACHTYPE\t�述目�執行 Bash 的系統字串。\n"
+"    MAILCHECK\tBash 檢測新郵件的頻率，以秒為單�。\n"
+"    MAILPATH\tBash 從中檢測新郵件的檔案列表，以分號分隔。\n"
+"    OSTYPE\t執行 Bash 的 Unix 版本。\n"
+"    PATH\t當尋找指令時�尋的目錄列表，以冒號分隔。\n"
+"    PROMPT_COMMAND\t�出�一個主�示符之�執行的命\n"
+"    \t\t令。\n"
+"    PS1\t\t主�示符字串。\n"
+"    PS2\t\t從�示符字串。\n"
+"    PWD\t\t目�目錄的完整路徑。\n"
+"    SHELLOPTS\t已啟用的 shell �項列表，以冒號分隔。\n"
+"    TERM\t目�終端類型的�稱。\n"
+"    TIMEFORMAT\t以關�則「time�顯示的時間統計資訊的輸出\n"
+"    \t\t格�。\n"
+"    auto_resume\t�空時，一個單�的指令詞會首先被在目�\n"
+"    \t\t�止的工作列表中�尋。如果找到則該工作被置於�臺。\n"
+"    \t\t如果值為「exact�則�味著指令詞必須精確符��止工作\n"
+"    \t\t列表中的指令。如果值為「substring�則�味著指令詞必\n"
+"    \t\t須符�工作的一個�字串。任何其他的值�味著指令詞\n"
+"    \t\t必須是�止工作的一個字首。\n"
+"    histchars\t控制歷�記錄展開和快速�代的字元。第一個字元是\n"
+"    \t\t歷�記錄�代字元，通常是「!�。第二個字元是快速�代字元，\n"
+"    \t\t通常是「^�。第三個是歷�記錄註釋字元，通常是「#�。\n"
+"    HISTIGNORE\t用於決定哪些指令被存入歷�記錄檔案的模�\n"
+"    \t\t列表，以冒號分隔。\n"
+
+#: builtins.c:1821
+msgid ""
+"Add directories to stack.\n"
+"    \n"
+"    Adds a directory to the top of the directory stack, or rotates\n"
+"    the stack, making the new top of the stack the current working\n"
+"    directory.  With no arguments, exchanges the top two directories.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when adding\n"
+"    \t\tdirectories to the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the left of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      -N\tRotates the stack so that the Nth directory (counting\n"
+"    \t\tfrom the right of the list shown by `dirs', starting with\n"
+"    \t\tzero) is at the top.\n"
+"    \n"
+"      dir\tAdds DIR to the directory stack at the top, making it the\n"
+"    \t\tnew current working directory.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"從堆疊中建立目錄。\n"
+"    \n"
+"    從目錄堆疊中建立�目。�帶�數時，建立堆疊頂端目錄，並變更至新的堆疊\n"
+"    頂端目錄。\n"
+"    \n"
+"    �項：\n"
+"      -n\t抑制從堆疊中刪除目錄時通常的目錄變��作，從而僅�堆疊\n"
+"    \t進行�作。\n"
+"    \n"
+"    �數：\n"
+"      +N\t刪除第 N 個目錄 (「dirs�顯示的目錄列表中左起，從零開始)。\n"
+"    \t例如：「popd +0�刪除第一個目錄，「popd +1�刪除第二個。\n"
+"    \n"
+"      -N\t刪除第 N 個目錄 (「dirs�顯示的目錄列表中�起，從零開始)。\n"
+"    \t例如：「popd -0�刪除最後一個目錄，，「popd -1�刪除倒數第二個。\n"
+"    \n"
+"   「dirs�內建顯示目錄堆疊。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功，除�使用了無效的�數或者目錄變�失敗。"
+
+#: builtins.c:1855
+msgid ""
+"Remove directories from stack.\n"
+"    \n"
+"    Removes entries from the directory stack.  With no arguments, removes\n"
+"    the top directory from the stack, and changes to the new top directory.\n"
+"    \n"
+"    Options:\n"
+"      -n\tSuppresses the normal change of directory when removing\n"
+"    \t\tdirectories from the stack, so only the stack is manipulated.\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tRemoves the Nth entry counting from the left of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd +0'\n"
+"    \t\tremoves the first directory, `popd +1' the second.\n"
+"    \n"
+"      -N\tRemoves the Nth entry counting from the right of the list\n"
+"    \t\tshown by `dirs', starting with zero.  For example: `popd -0'\n"
+"    \t\tremoves the last directory, `popd -1' the next to last.\n"
+"    \n"
+"    The `dirs' builtin displays the directory stack.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid argument is supplied or the directory\n"
+"    change fails."
+msgstr ""
+"從堆疊中刪除目錄。\n"
+"    \n"
+"    從目錄堆疊中刪除�目。�帶�數時，刪除堆疊頂端目錄，並變更至新的堆疊\n"
+"    頂端目錄。\n"
+"    \n"
+"    �項：\n"
+"      -n\t抑制從堆疊中刪除目錄時通常的目錄變��作，從而僅�堆疊\n"
+"    \t進行�作。\n"
+"    \n"
+"    �數：\n"
+"      +N\t刪除第 N 個目錄 (「dirs�顯示的目錄列表中左起，從零開始)。\n"
+"    \t例如：「popd +0�刪除第一個目錄，「popd +1�刪除第二個。\n"
+"    \n"
+"      -N\t刪除第 N 個目錄 (「dirs�顯示的目錄列表中�起，從零開始)。\n"
+"    \t例如：「popd -0�刪除最後一個目錄，，「popd -1�刪除倒數第二個。\n"
+"    \n"
+"   「dirs�內建顯示目錄堆疊。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功，除�使用了無效的�數或者目錄變�失敗。"
+
+#: builtins.c:1885
+msgid ""
+"Display directory stack.\n"
+"    \n"
+"    Display the list of currently remembered directories.  Directories\n"
+"    find their way onto the list with the `pushd' command; you can get\n"
+"    back up through the list with the `popd' command.\n"
+"    \n"
+"    Options:\n"
+"      -c\tclear the directory stack by deleting all of the elements\n"
+"      -l\tdo not print tilde-prefixed versions of directories relative\n"
+"    \t\tto your home directory\n"
+"      -p\tprint the directory stack with one entry per line\n"
+"      -v\tprint the directory stack with one entry per line prefixed\n"
+"    \t\twith its position in the stack\n"
+"    \n"
+"    Arguments:\n"
+"      +N\tDisplays the Nth entry counting from the left of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"      -N\tDisplays the Nth entry counting from the right of the list\n"
+"    \t\tshown by dirs when invoked without options, starting with\n"
+"    \t\tzero.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"顯示目錄堆疊。\n"
+"    \n"
+"    顯示目�記�的目錄列表。藉由「pushd�指令�以將目錄存入列表\n"
+"    中；「popd�指令�用於�歷彈出列表。\n"
+"    \n"
+"    �項：\n"
+"      -c\t刪除所有元素以清空目錄堆疊\n"
+"      -l\t��出與主目錄相關的波浪號字首的目錄\n"
+"      -p\t�列一個�目�出目錄堆疊\n"
+"      -v\t�列一個�目，以堆疊中�置為字首�出目錄堆疊\n"
+"    \n"
+"    �數：\n"
+"      +N\t顯示 dirs �帶�項啟動時顯示的目錄列表左起中第\n"
+"    \tN 個目錄，從零開始。\n"
+"    \n"
+"      -N\t顯示 dirs �帶�項啟動時顯示的目錄列表�起中第\n"
+"    \tN 個目錄，從零開始。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功，除�使用了無效的�項或者發生錯誤。"
+
+#: builtins.c:1916
+msgid ""
+"Set and unset shell options.\n"
+"    \n"
+"    Change the setting of each shell option OPTNAME.  Without any option\n"
+"    arguments, list each supplied OPTNAME, or all shell options if no\n"
+"    OPTNAMEs are given, with an indication of whether or not each is set.\n"
+"    \n"
+"    Options:\n"
+"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+"      -p\tprint each shell option with an indication of its status\n"
+"      -q\tsuppress output\n"
+"      -s\tenable (set) each OPTNAME\n"
+"      -u\tdisable (unset) each OPTNAME\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+"    given or OPTNAME is disabled."
+msgstr ""
+"設定和�消設定 shell �項。\n"
+"    \n"
+"    變更�個 shell <�項�稱> 的設定。�帶�項�數時，\n"
+"    顯示�個�供的 <�項�稱> 或所有 shell �項 (如果沒有\n"
+"    傳入任何 <�項�稱>) 和是��個都有設定到的指示。\n"
+"    \n"
+"    �項：\n"
+"      -o\t�制 <�項�稱> 為定義用於「set -o�的�項\n"
+"      -p\t�出�個 shell �項並標註它的狀態。\n"
+"      -q\t抑制輸出\n"
+"      -s\t啟用(設定)�個 <�項�稱> �項\n"
+"      -u\t�用(�消設定)�個 <�項�稱> �項\n"
+"    \n"
+"    退出狀態：\n"
+"    如果 <�項�稱> �項被啟用則回傳�功；如果是\n"
+"    無效的�項或 <�項�稱> 被�用則失敗。"
+
+#: builtins.c:1937
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+"    \n"
+"    Options:\n"
+"      -v var\tassign the output to shell variable VAR rather than\n"
+"    \t\tdisplay it on the standard output\n"
+"    \n"
+"    FORMAT is a character string which contains three types of objects: "
+"plain\n"
+"    characters, which are simply copied to standard output; character "
+"escape\n"
+"    sequences, which are converted and copied to the standard output; and\n"
+"    format specifications, each of which causes printing of the next "
+"successive\n"
+"    argument.\n"
+"    \n"
+"    In addition to the standard format specifications described in "
+"printf(1),\n"
+"    printf interprets:\n"
+"    \n"
+"      %b\texpand backslash escape sequences in the corresponding argument\n"
+"      %q\tquote the argument in a way that can be reused as shell input\n"
+"      %(fmt)T\toutput the date-time string resulting from using FMT as a "
+"format\n"
+"    \t        string for strftime(3)\n"
+"    \n"
+"    The format is re-used as necessary to consume all of the arguments.  If\n"
+"    there are fewer arguments than the format requires,  extra format\n"
+"    specifications behave as if a zero value or null string, as "
+"appropriate,\n"
+"    had been supplied.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or a write or "
+"assignment\n"
+"    error occurs."
+msgstr ""
+"在 <格�> 的控制下格�化並�出 <�數>。\n"
+"    \n"
+"    �項：\n"
+"      -v var\t將輸出指派給 shell 變數 VAR 而�顯示在標準輸出上\n"
+"    \n"
+"    <格�> 是包�三種物件的字串：簡單地被複製到標準輸出的普通字元；\n"
+"    被變�之後複製到標準輸入的逸出字元；以��個都會影響到下個�數的�出格�"
+"化�格。\n"
+"    \n"
+"    在 printf(1) 中�述的標準控制�格之外，printf 解�：\n"
+"    \n"
+"      %b\t擴充套件�應�數中的�斜線逸出�列\n"
+"      %q\t以��為 shell 輸入的格�引用�數\n"
+"      %(fmt)T\t以 FMT 為�供 strftime(3) 的格�輸出日期與時間字串    \n"
+"    退出狀態：\n"
+"    回傳�功，除�使用了無效的�項或者發生寫入或指派錯誤。"
+
+#: builtins.c:1971
+#, fuzzy
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+"    \n"
+"    For each NAME, specify how arguments are to be completed.  If no "
+"options\n"
+"    are supplied, existing completion specifications are printed in a way "
+"that\n"
+"    allows them to be reused as input.\n"
+"    \n"
+"    Options:\n"
+"      -p\tprint existing completion specifications in a reusable format\n"
+"      -r\tremove a completion specification for each NAME, or, if no\n"
+"    \t\tNAMEs are supplied, all completion specifications\n"
+"      -D\tapply the completions and actions as the default for commands\n"
+"    \t\twithout any specific completion defined\n"
+"      -E\tapply the completions and actions to \"empty\" commands --\n"
+"    \t\tcompletion attempted on a blank line\n"
+"      -I\tapply the completions and actions to the initial (usually the\n"
+"    \t\tcommand) word\n"
+"    \n"
+"    When completion is attempted, the actions are applied in the order the\n"
+"    uppercase-letter options are listed above. If multiple options are "
+"supplied,\n"
+"    the -D option takes precedence over -E, and both take precedence over -"
+"I.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"�範 readline 如何完�讀��數。\n"
+"    \n"
+"    �格�於�一個<�稱>如何完�讀��數。如果�帶�項，\n"
+"    �有的補完�格會以�以�用為輸入的格��出。\n"
+"    \n"
+"    �項：\n"
+"      -p\t以��用的格��出�有的補完�格。\n"
+"      -r\t�於�個<�稱>刪除補完�格，或者如果沒有�供<�稱>\n"
+"    \t�稱，刪除所有的補完�格。\n"
+"      -D\t�於沒有補完�格定義的指令，設定�設的補完動作\n"
+"      -E\t�於「empty�指令設定補完動作，—— �於空列的補完。\n"
+"      -I\t套用補完和動作到首個 (通常是指令) 單詞\n"
+"    \n"
+"    嘗試補完時，按照上述大寫字��項的順�進行動作。 如果傳入了多個�項，\n"
+"    -D �項優先於 -E �項，而兩者優先於 -I �項。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功，除�使用了無效的�項或者錯誤發生。"
+
+#: builtins.c:2001
+msgid ""
+"Display possible completions depending on the options.\n"
+"    \n"
+"    Intended to be used from within a shell function generating possible\n"
+"    completions.  If the optional WORD argument is supplied, matches "
+"against\n"
+"    WORD are generated.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+"�據�項顯示�能的補完。\n"
+"    \n"
+"    �圖在能產生�能的補完 shell 函數內部使用。\n"
+"    如果�供了��的 WORD �數，則產生按照 WORD\n"
+"    進行的符�。\n"
+"    \n"
+"    退出狀態：\n"
+"    除�使用了無效�項或者錯誤發生，�則回傳�功。"
+
+#: builtins.c:2016
+msgid ""
+"Modify or display completion options.\n"
+"    \n"
+"    Modify the completion options for each NAME, or, if no NAMEs are "
+"supplied,\n"
+"    the completion currently being executed.  If no OPTIONs are given, "
+"print\n"
+"    the completion options for each NAME or the current completion "
+"specification.\n"
+"    \n"
+"    Options:\n"
+"    \t-o option\tSet completion option OPTION for each NAME\n"
+"    \t-D\t\tChange options for the \"default\" command completion\n"
+"    \t-E\t\tChange options for the \"empty\" command completion\n"
+"    \t-I\t\tChange options for completion on the initial word\n"
+"    \n"
+"    Using `+o' instead of `-o' turns off the specified option.\n"
+"    \n"
+"    Arguments:\n"
+"    \n"
+"    Each NAME refers to a command for which a completion specification must\n"
+"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
+"    are supplied, compopt must be called by a function currently generating\n"
+"    completions, and the options for that currently-executing completion\n"
+"    generator are modified.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is supplied or NAME does not\n"
+"    have a completion specification defined."
+msgstr ""
+"修改或顯示補完�項。\n"
+"    \n"
+"    修改�個 <�稱> 的補完�項，或如果沒有�供 <�稱>，執行目�的補完。\n"
+"    如果�帶�項，�出�個 <�稱> 的補完�項或目�的補完�格。\n"
+"    \n"
+"    �項：\n"
+"    \t-o option\t為�個 <�稱> 設定補完�項 option\n"
+"    \t-D\t\t為「default�指令補完變更�項\n"
+"    \t-E\t\t為「empty�指令補完變更�項\n"
+"    \t-I\t\t為首單詞上的補完變更�項\n"
+"    \n"
+"    使用「+o�而�是「-o��以關閉指定的�項。\n"
+"    \n"
+"    �數：\n"
+"    \n"
+"    �個 <�稱> 都�應一個之�以藉由「complete�內建定義了補完�格的\n"
+"    指令。如果��供 <�稱>，目�產生補完的函數必須呼� compopt，\n"
+"    並且目�執行的補完產生器�項會被修改。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功，除�使用了無效的�項或者 <�稱> 沒有定義補完�格。"
+
+#: builtins.c:2047
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+"    \n"
+"    Read lines from the standard input into the indexed array variable "
+"ARRAY, or\n"
+"    from file descriptor FD if the -u option is supplied.  The variable "
+"MAPFILE\n"
+"    is the default ARRAY.\n"
+"    \n"
+"    Options:\n"
+"      -d delim\tUse DELIM to terminate lines, instead of newline\n"
+"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
+"copied\n"
+"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
+"index is 0\n"
+"      -s count\tDiscard the first COUNT lines read\n"
+"      -t\tRemove a trailing DELIM from each line read (default newline)\n"
+"      -u fd\tRead lines from file descriptor FD instead of the standard "
+"input\n"
+"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n"
+"      -c quantum\tSpecify the number of lines read between each call to\n"
+"    \t\t\tCALLBACK\n"
+"    \n"
+"    Arguments:\n"
+"      ARRAY\tArray variable name to use for file data\n"
+"    \n"
+"    If -C is supplied without -c, the default quantum is 5000.  When\n"
+"    CALLBACK is evaluated, it is supplied the index of the next array\n"
+"    element to be assigned and the line to be assigned to that element\n"
+"    as additional arguments.\n"
+"    \n"
+"    If not supplied with an explicit origin, mapfile will clear ARRAY "
+"before\n"
+"    assigning to it.\n"
+"    \n"
+"    Exit Status:\n"
+"    Returns success unless an invalid option is given or ARRAY is readonly "
+"or\n"
+"    not an indexed array."
+msgstr ""
+"從標準輸入讀�列到索引陣列變數中。\n"
+"    \n"
+"    從標準輸入讀�列到索引陣列變數 ARRAY 中，或者如果使用了 -u �項，\n"
+"    從檔案�述符 FD 中讀�。MAPFILE 變數是�設的 ARRAY 變數。\n"
+"    \n"
+"    �項：\n"
+"      -d delim\t使用 DELIM �代�行符號來斷行\n"
+"      -n count\t最多複製 COUNT 列，如果 COUNT 為 0，則複製所有列。\n"
+"      -O origin\t從索引 ORIGIN 開始 指派給 ARRAY 變數。�設索引是 0。\n"
+"      -s count \t丟棄最先讀�的 COUNT 列。\n"
+"      -t\t\t從讀�的�列末尾刪除一個�列符。\n"
+"      -u fd\t\t從檔案�述符 FD 中讀�列而�是標準輸入。\n"
+"      -C callback\t� QUANTUM 次讀列之後� CALLBACK 回呼求值。\n"
+"      -c quantum\t定義�次呼� CALLBACK 回呼之間讀�的列數。\n"
+"    \n"
+"    �數：\n"
+"      ARRAY\t\t儲存資料使用的陣列變數\n"
+"    \n"
+"    如果使用了 -C 而沒有 -c，�設的定�是 5000。當� CALLBACK 求值時，\n"
+"    下一個將被指派的陣列元素索引�為�外�數被傳�。\n"
+"    \n"
+"    如果沒有顯�指定起始索引，mapfile 將在指派�清空 ARRAY 變數。\n"
+"    \n"
+"    退出狀態：\n"
+"    回傳�功，除�使用了無效的�項，或者 ARRAY 變數唯讀或�是索引陣列。"
+
+#: builtins.c:2083
+msgid ""
+"Read lines from a file into an array variable.\n"
+"    \n"
+"    A synonym for `mapfile'."
+msgstr ""
+"從一個檔案中讀�列到陣列變數中\n"
+"    \n"
+"    一個「mapfile�的�義詞。"
+
+#~ msgid ""
+#~ "Returns the context of the current subroutine call.\n"
+#~ "    \n"
+#~ "    Without EXPR, returns "
+#~ msgstr ""
+#~ "回傳目��例程呼�的語境\n"
+#~ "    \n"
+#~ "    �帶 <表示�> 時，回傳"
+
+#~ msgid "add_process: process %5ld (%s) in the_pipeline"
+#~ msgstr "add_process: 行程 %5ld(%s) 進入 the_pipeline"
+
+#~ msgid "Unknown Signal #"
+#~ msgstr "�明訊號 #"
diff --git a/print_cmd.c b/print_cmd.c
new file mode 100644
index 0000000..3c8c2d8
--- /dev/null
+++ b/print_cmd.c
@@ -0,0 +1,1613 @@
+/* print_command -- A way to make readable commands from a command tree. */
+
+/* Copyright (C) 1989-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include <stdio.h>
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#if defined (PREFER_STDARG)
+#  include <stdarg.h>
+#else
+#  include <varargs.h>
+#endif
+
+#include "bashansi.h"
+#include "bashintl.h"
+
+#define NEED_XTRACE_SET_DECL
+
+#include "shell.h"
+#include "flags.h"
+#include <y.tab.h>	/* use <...> so we pick it up from the build directory */
+#include "input.h"
+
+#include "shmbutil.h"
+
+#include "builtins/common.h"
+
+#if !HAVE_DECL_PRINTF
+extern int printf PARAMS((const char *, ...));	/* Yuck.  Double yuck. */
+#endif
+
+static int indentation;
+static int indentation_amount = 4;
+
+#if defined (PREFER_STDARG)
+typedef void PFUNC PARAMS((const char *, ...));
+
+static void cprintf PARAMS((const char *, ...))  __attribute__((__format__ (printf, 1, 2)));
+static void xprintf PARAMS((const char *, ...))  __attribute__((__format__ (printf, 1, 2)));
+#else
+#define PFUNC VFunction
+static void cprintf ();
+static void xprintf ();
+#endif
+
+static void reset_locals PARAMS((void));
+static void newline PARAMS((char *));
+static void indent PARAMS((int));
+static void semicolon PARAMS((void));
+static void the_printed_command_resize PARAMS((int));
+
+static void make_command_string_internal PARAMS((COMMAND *));
+static void _print_word_list PARAMS((WORD_LIST *, char *, PFUNC *));
+static void command_print_word_list PARAMS((WORD_LIST *, char *));
+static void print_case_clauses PARAMS((PATTERN_LIST *));
+static void print_redirection_list PARAMS((REDIRECT *));
+static void print_redirection PARAMS((REDIRECT *));
+static void print_heredoc_header PARAMS((REDIRECT *));
+static void print_heredoc_body PARAMS((REDIRECT *));
+static void print_heredocs PARAMS((REDIRECT *));
+static void print_heredoc_bodies PARAMS((REDIRECT *));
+static void print_deferred_heredocs PARAMS((const char *));
+
+static void print_for_command PARAMS((FOR_COM *));
+#if defined (ARITH_FOR_COMMAND)
+static void print_arith_for_command PARAMS((ARITH_FOR_COM *));
+#endif
+#if defined (SELECT_COMMAND)
+static void print_select_command PARAMS((SELECT_COM *));
+#endif
+static void print_group_command PARAMS((GROUP_COM *));
+static void print_case_command PARAMS((CASE_COM *));
+static void print_while_command PARAMS((WHILE_COM *));
+static void print_until_command PARAMS((WHILE_COM *));
+static void print_until_or_while PARAMS((WHILE_COM *, char *));
+static void print_if_command PARAMS((IF_COM *));
+#if defined (COND_COMMAND)
+static void print_cond_node PARAMS((COND_COM *));
+#endif
+static void print_function_def PARAMS((FUNCTION_DEF *));
+
+#define PRINTED_COMMAND_INITIAL_SIZE 64
+#define PRINTED_COMMAND_GROW_SIZE 128
+
+char *the_printed_command = (char *)NULL;
+int the_printed_command_size = 0;
+int command_string_index = 0;
+
+int xtrace_fd = -1;
+FILE *xtrace_fp = 0;
+
+#define CHECK_XTRACE_FP	xtrace_fp = (xtrace_fp ? xtrace_fp : stderr)
+
+/* shell expansion characters: used in print_redirection_list */
+#define EXPCHAR(c) ((c) == '{' || (c) == '~' || (c) == '$' || (c) == '`')
+
+#define PRINT_DEFERRED_HEREDOCS(x) \
+  do { \
+    if (deferred_heredocs) \
+      print_deferred_heredocs (x); \
+  } while (0)
+
+/* Non-zero means the stuff being printed is inside of a function def. */
+static int inside_function_def;
+static int skip_this_indent;
+static int was_heredoc;
+static int printing_connection;
+static REDIRECT *deferred_heredocs;
+
+/* The depth of the group commands that we are currently printing.  This
+   includes the group command that is a function body. */
+static int group_command_nesting;
+
+/* A buffer to indicate the indirection level (PS4) when set -x is enabled. */
+static char *indirection_string = 0;
+static int indirection_stringsiz = 0;
+
+/* Print COMMAND (a command tree) on standard output. */
+void
+print_command (command)
+     COMMAND *command;
+{
+  command_string_index = 0;
+  printf ("%s", make_command_string (command));
+}
+
+/* Make a string which is the printed representation of the command
+   tree in COMMAND.  We return this string.  However, the string is
+   not consed, so you have to do that yourself if you want it to
+   remain around. */
+char *
+make_command_string (command)
+     COMMAND *command;
+{
+  command_string_index = was_heredoc = 0;
+  deferred_heredocs = 0;
+  make_command_string_internal (command);
+  return (the_printed_command);
+}
+
+/* The internal function.  This is the real workhorse. */
+static void
+make_command_string_internal (command)
+     COMMAND *command;
+{
+  char s[3];
+
+  if (command == 0)
+    cprintf ("");
+  else
+    {
+      if (skip_this_indent)
+	skip_this_indent--;
+      else
+	indent (indentation);
+
+      if (command->flags & CMD_TIME_PIPELINE)
+	{
+	  cprintf ("time ");
+	  if (command->flags & CMD_TIME_POSIX)
+	    cprintf ("-p ");
+	}
+
+      if (command->flags & CMD_INVERT_RETURN)
+	cprintf ("! ");
+
+      switch (command->type)
+	{
+	case cm_for:
+	  print_for_command (command->value.For);
+	  break;
+
+#if defined (ARITH_FOR_COMMAND)
+	case cm_arith_for:
+	  print_arith_for_command (command->value.ArithFor);
+	  break;
+#endif
+
+#if defined (SELECT_COMMAND)
+	case cm_select:
+	  print_select_command (command->value.Select);
+	  break;
+#endif
+
+	case cm_case:
+	  print_case_command (command->value.Case);
+	  break;
+
+	case cm_while:
+	  print_while_command (command->value.While);
+	  break;
+
+	case cm_until:
+	  print_until_command (command->value.While);
+	  break;
+
+	case cm_if:
+	  print_if_command (command->value.If);
+	  break;
+
+#if defined (DPAREN_ARITHMETIC)
+	case cm_arith:
+	  print_arith_command (command->value.Arith->exp);
+	  break;
+#endif
+
+#if defined (COND_COMMAND)
+	case cm_cond:
+	  print_cond_command (command->value.Cond);
+	  break;
+#endif
+
+	case cm_simple:
+	  print_simple_command (command->value.Simple);
+	  break;
+
+	case cm_connection:
+
+	  skip_this_indent++;
+	  printing_connection++;
+	  make_command_string_internal (command->value.Connection->first);
+
+	  switch (command->value.Connection->connector)
+	    {
+	    case '&':
+	    case '|':
+	      {
+		char c = command->value.Connection->connector;
+
+		s[0] = ' ';
+		s[1] = c;
+		s[2] = '\0';
+		
+		print_deferred_heredocs (s);
+
+		if (c != '&' || command->value.Connection->second)
+		  {
+		    cprintf (" ");
+		    skip_this_indent++;
+		  }
+	      }
+	      break;
+
+	    case AND_AND:
+	      print_deferred_heredocs (" && ");
+	      if (command->value.Connection->second)
+		skip_this_indent++;
+	      break;
+
+	    case OR_OR:
+	      print_deferred_heredocs (" || ");
+	      if (command->value.Connection->second)
+		skip_this_indent++;
+	      break;
+
+	    case ';':
+	      if (deferred_heredocs == 0)
+		{
+		  if (was_heredoc == 0)
+		    cprintf (";");
+		  else
+		    was_heredoc = 0;
+		}
+	      else
+		print_deferred_heredocs (inside_function_def ? "" : ";");
+
+	      if (inside_function_def)
+		cprintf ("\n");
+	      else
+		{
+		  cprintf (" ");
+		  if (command->value.Connection->second)
+		    skip_this_indent++;
+		}
+	      break;
+
+	    default:
+	      cprintf (_("print_command: bad connector `%d'"),
+		       command->value.Connection->connector);
+	      break;
+	    }
+
+	  make_command_string_internal (command->value.Connection->second);
+	  PRINT_DEFERRED_HEREDOCS ("");
+	  printing_connection--;	  	  
+	  break;
+
+	case cm_function_def:
+	  print_function_def (command->value.Function_def);
+	  break;
+
+	case cm_group:
+	  print_group_command (command->value.Group);
+	  break;
+
+	case cm_subshell:
+	  cprintf ("( ");
+	  skip_this_indent++;
+	  make_command_string_internal (command->value.Subshell->command);
+	  PRINT_DEFERRED_HEREDOCS ("");
+	  cprintf (" )");
+	  break;
+
+	case cm_coproc:
+	  cprintf ("coproc %s ", command->value.Coproc->name);
+	  skip_this_indent++;
+	  make_command_string_internal (command->value.Coproc->command);
+	  break;
+
+	default:
+	  command_error ("print_command", CMDERR_BADTYPE, command->type, 0);
+	  break;
+	}
+
+
+      if (command->redirects)
+	{
+	  cprintf (" ");
+	  print_redirection_list (command->redirects);
+	}
+    }
+}
+
+static void
+_print_word_list (list, separator, pfunc)
+     WORD_LIST *list;
+     char *separator;
+     PFUNC *pfunc;
+{
+  WORD_LIST *w;
+
+  for (w = list; w; w = w->next)
+    (*pfunc) ("%s%s", w->word->word, w->next ? separator : "");
+}
+
+void
+print_word_list (list, separator)
+     WORD_LIST *list;
+     char *separator;
+{
+  _print_word_list (list, separator, xprintf);
+}
+
+void
+xtrace_set (fd, fp)
+     int fd;
+     FILE *fp;
+{
+  if (fd >= 0 && sh_validfd (fd) == 0)
+    {
+      internal_error (_("xtrace_set: %d: invalid file descriptor"), fd);
+      return;
+    }
+  if (fp == 0)
+    {
+      internal_error (_("xtrace_set: NULL file pointer"));
+      return;
+    }
+  if (fd >= 0 && fileno (fp) != fd)
+    internal_warning (_("xtrace fd (%d) != fileno xtrace fp (%d)"), fd, fileno (fp));
+  
+  xtrace_fd = fd;
+  xtrace_fp = fp;
+}
+
+void
+xtrace_init ()
+{
+  xtrace_set (-1, stderr);
+}
+
+void
+xtrace_reset ()
+{
+  if (xtrace_fd >= 0 && xtrace_fp)
+    {
+      fflush (xtrace_fp);
+      fclose (xtrace_fp);
+    }
+  else if (xtrace_fd >= 0)
+    close (xtrace_fd);
+
+  xtrace_fd = -1;
+  xtrace_fp = stderr;
+}
+
+void
+xtrace_fdchk (fd)
+     int fd;
+{
+  if (fd == xtrace_fd)
+    xtrace_reset ();
+}
+
+/* Return a string denoting what our indirection level is. */
+
+char *
+indirection_level_string ()
+{
+  register int i, j;
+  char *ps4;
+  char ps4_firstc[MB_LEN_MAX+1];
+  int ps4_firstc_len, ps4_len, ineed, old;
+
+  ps4 = get_string_value ("PS4");
+  if (indirection_string == 0)
+    indirection_string = xmalloc (indirection_stringsiz = 100);
+  indirection_string[0] = '\0';
+
+  if (ps4 == 0 || *ps4 == '\0')
+    return (indirection_string);
+
+  old = change_flag ('x', FLAG_OFF);
+  ps4 = decode_prompt_string (ps4);
+  if (old)
+    change_flag ('x', FLAG_ON);
+
+  if (ps4 == 0 || *ps4 == '\0')
+    return (indirection_string);
+
+#if defined (HANDLE_MULTIBYTE)
+  ps4_len = strnlen (ps4, MB_CUR_MAX);
+  ps4_firstc_len = MBLEN (ps4, ps4_len);
+  if (ps4_firstc_len == 1 || ps4_firstc_len == 0 || ps4_firstc_len < 0)
+    {
+      ps4_firstc[0] = ps4[0];
+      ps4_firstc[ps4_firstc_len = 1] = '\0';
+    }
+  else
+    memcpy (ps4_firstc, ps4, ps4_firstc_len);
+#else
+  ps4_firstc[0] = ps4[0];
+  ps4_firstc[ps4_firstc_len = 1] = '\0';
+#endif
+
+  /* Dynamically resize indirection_string so we have room for everything
+     and we don't have to truncate ps4 */
+  ineed = (ps4_firstc_len * indirection_level) + strlen (ps4);
+  if (ineed > indirection_stringsiz - 1)
+    {
+      indirection_stringsiz = ineed + 1;
+      indirection_string = xrealloc (indirection_string, indirection_stringsiz);
+    }
+
+  for (i = j = 0; ps4_firstc[0] && j < indirection_level && i < indirection_stringsiz - 1; i += ps4_firstc_len, j++)
+    {
+      if (ps4_firstc_len == 1)
+	indirection_string[i] = ps4_firstc[0];
+      else
+	memcpy (indirection_string+i, ps4_firstc, ps4_firstc_len);
+    }      
+
+  for (j = ps4_firstc_len; *ps4 && ps4[j] && i < indirection_stringsiz - 1; i++, j++)
+    indirection_string[i] = ps4[j];
+
+  indirection_string[i] = '\0';
+  free (ps4);
+  return (indirection_string);
+}
+
+void
+xtrace_print_assignment (name, value, assign_list, xflags)
+     char *name, *value;
+     int assign_list, xflags;
+{
+  char *nval;
+
+  CHECK_XTRACE_FP;
+
+  if (xflags)
+    fprintf (xtrace_fp, "%s", indirection_level_string ());
+
+  /* VALUE should not be NULL when this is called. */
+  if (*value == '\0' || assign_list)
+    nval = value;
+  else if (sh_contains_shell_metas (value))
+    nval = sh_single_quote (value);
+  else if (ansic_shouldquote (value))
+    nval = ansic_quote (value, 0, (int *)0);
+  else
+    nval = value;
+
+  if (assign_list)
+    fprintf (xtrace_fp, "%s=(%s)\n", name, nval);
+  else
+    fprintf (xtrace_fp, "%s=%s\n", name, nval);
+
+  if (nval != value)
+    FREE (nval);
+
+  fflush (xtrace_fp);
+}
+
+/* A function to print the words of a simple command when set -x is on.  Also used to
+   print the word list in a for or select command header; in that case, we suppress
+   quoting the words because they haven't been expanded yet.  XTFLAGS&1 means to
+   print $PS4; XTFLAGS&2 means to suppress quoting the words in LIST. */
+void
+xtrace_print_word_list (list, xtflags)
+     WORD_LIST *list;
+     int xtflags;
+{
+  WORD_LIST *w;
+  char *t, *x;
+
+  CHECK_XTRACE_FP;
+
+  if (xtflags&1)
+    fprintf (xtrace_fp, "%s", indirection_level_string ());
+
+  for (w = list; w; w = w->next)
+    {
+      t = w->word->word;
+      if (t == 0 || *t == '\0')
+	fprintf (xtrace_fp, "''%s", w->next ? " " : "");
+      else if (xtflags & 2)
+	fprintf (xtrace_fp, "%s%s", t, w->next ? " " : "");
+      else if (sh_contains_shell_metas (t))
+	{
+	  x = sh_single_quote (t);
+	  fprintf (xtrace_fp, "%s%s", x, w->next ? " " : "");
+	  free (x);
+	}
+      else if (ansic_shouldquote (t))
+	{
+	  x = ansic_quote (t, 0, (int *)0);
+	  fprintf (xtrace_fp, "%s%s", x, w->next ? " " : "");
+	  free (x);
+	}
+      else
+	fprintf (xtrace_fp, "%s%s", t, w->next ? " " : "");
+    }
+  fprintf (xtrace_fp, "\n");
+  fflush (xtrace_fp);
+}
+
+static void
+command_print_word_list (list, separator)
+     WORD_LIST *list;
+     char *separator;
+{
+  _print_word_list (list, separator, cprintf);
+}
+
+void
+print_for_command_head (for_command)
+     FOR_COM *for_command;
+{
+  cprintf ("for %s in ", for_command->name->word);
+  command_print_word_list (for_command->map_list, " ");
+}
+
+void
+xtrace_print_for_command_head (for_command)
+     FOR_COM *for_command;
+{
+  CHECK_XTRACE_FP;
+  fprintf (xtrace_fp, "%s", indirection_level_string ());
+  fprintf (xtrace_fp, "for %s in ", for_command->name->word);
+  xtrace_print_word_list (for_command->map_list, 2);
+}
+
+static void
+print_for_command (for_command)
+     FOR_COM *for_command;
+{
+  print_for_command_head (for_command);
+  cprintf (";");
+  newline ("do\n");
+
+  indentation += indentation_amount;
+  make_command_string_internal (for_command->action);
+  PRINT_DEFERRED_HEREDOCS ("");
+  semicolon ();
+  indentation -= indentation_amount;
+
+  newline ("done");
+}
+
+#if defined (ARITH_FOR_COMMAND)
+static void
+print_arith_for_command (arith_for_command)
+     ARITH_FOR_COM *arith_for_command;
+{
+  cprintf ("for ((");
+  command_print_word_list (arith_for_command->init, " ");
+  cprintf ("; ");
+  command_print_word_list (arith_for_command->test, " ");
+  cprintf ("; ");
+  command_print_word_list (arith_for_command->step, " ");
+  cprintf ("))");
+  newline ("do\n");
+  indentation += indentation_amount;
+  make_command_string_internal (arith_for_command->action);
+  PRINT_DEFERRED_HEREDOCS ("");
+  semicolon ();
+  indentation -= indentation_amount;
+  newline ("done");
+}
+#endif /* ARITH_FOR_COMMAND */
+
+#if defined (SELECT_COMMAND)
+void
+print_select_command_head (select_command)
+     SELECT_COM *select_command;
+{
+  cprintf ("select %s in ", select_command->name->word);
+  command_print_word_list (select_command->map_list, " ");
+}
+
+void
+xtrace_print_select_command_head (select_command)
+     SELECT_COM *select_command;
+{
+  CHECK_XTRACE_FP;
+  fprintf (xtrace_fp, "%s", indirection_level_string ());
+  fprintf (xtrace_fp, "select %s in ", select_command->name->word);
+  xtrace_print_word_list (select_command->map_list, 2);
+}
+
+static void
+print_select_command (select_command)
+     SELECT_COM *select_command;
+{
+  print_select_command_head (select_command);
+
+  cprintf (";");
+  newline ("do\n");
+  indentation += indentation_amount;
+  make_command_string_internal (select_command->action);
+  PRINT_DEFERRED_HEREDOCS ("");
+  semicolon ();
+  indentation -= indentation_amount;
+  newline ("done");
+}
+#endif /* SELECT_COMMAND */
+
+static void
+print_group_command (group_command)
+     GROUP_COM *group_command;
+{
+  group_command_nesting++;
+  cprintf ("{ ");
+
+  if (inside_function_def == 0)
+    skip_this_indent++;
+  else
+    {
+      /* This is a group command { ... } inside of a function
+	 definition, and should be printed as a multiline group
+	 command, using the current indentation. */
+      cprintf ("\n");
+      indentation += indentation_amount;
+    }
+
+  make_command_string_internal (group_command->command);
+  PRINT_DEFERRED_HEREDOCS ("");
+
+  if (inside_function_def)
+    {
+      cprintf ("\n");
+      indentation -= indentation_amount;
+      indent (indentation);
+    }
+  else
+    {
+      semicolon ();
+      cprintf (" ");
+    }
+
+  cprintf ("}");
+
+  group_command_nesting--;
+}
+
+void
+print_case_command_head (case_command)
+     CASE_COM *case_command;
+{
+  cprintf ("case %s in ", case_command->word->word);
+}
+
+void
+xtrace_print_case_command_head (case_command)
+     CASE_COM *case_command;
+{
+  CHECK_XTRACE_FP;
+  fprintf (xtrace_fp, "%s", indirection_level_string ());
+  fprintf (xtrace_fp, "case %s in\n", case_command->word->word);
+}
+
+static void
+print_case_command (case_command)
+     CASE_COM *case_command;
+{
+  print_case_command_head (case_command);
+
+  if (case_command->clauses)
+    print_case_clauses (case_command->clauses);
+  newline ("esac");
+}
+
+static void
+print_case_clauses (clauses)
+     PATTERN_LIST *clauses;
+{
+  indentation += indentation_amount;
+  while (clauses)
+    {
+      newline ("");
+      command_print_word_list (clauses->patterns, " | ");
+      cprintf (")\n");
+      indentation += indentation_amount;
+      make_command_string_internal (clauses->action);
+      indentation -= indentation_amount;
+      PRINT_DEFERRED_HEREDOCS ("");
+      if (clauses->flags & CASEPAT_FALLTHROUGH)
+	newline (";&");
+      else if (clauses->flags & CASEPAT_TESTNEXT)
+	newline (";;&");
+      else
+	newline (";;");
+      clauses = clauses->next;
+    }
+  indentation -= indentation_amount;
+}
+
+static void
+print_while_command (while_command)
+     WHILE_COM *while_command;
+{
+  print_until_or_while (while_command, "while");
+}
+
+static void
+print_until_command (while_command)
+     WHILE_COM *while_command;
+{
+  print_until_or_while (while_command, "until");
+}
+
+static void
+print_until_or_while (while_command, which)
+     WHILE_COM *while_command;
+     char *which;
+{
+  cprintf ("%s ", which);
+  skip_this_indent++;
+  make_command_string_internal (while_command->test);
+  PRINT_DEFERRED_HEREDOCS ("");
+  semicolon ();
+  cprintf (" do\n");	/* was newline ("do\n"); */
+  indentation += indentation_amount;
+  make_command_string_internal (while_command->action);
+  PRINT_DEFERRED_HEREDOCS ("");
+  indentation -= indentation_amount;
+  semicolon ();
+  newline ("done");
+}
+
+static void
+print_if_command (if_command)
+     IF_COM *if_command;
+{
+  cprintf ("if ");
+  skip_this_indent++;
+  make_command_string_internal (if_command->test);
+  semicolon ();
+  cprintf (" then\n");
+  indentation += indentation_amount;
+  make_command_string_internal (if_command->true_case);
+  PRINT_DEFERRED_HEREDOCS ("");
+  indentation -= indentation_amount;
+
+  if (if_command->false_case)
+    {
+      semicolon ();
+      newline ("else\n");
+      indentation += indentation_amount;
+      make_command_string_internal (if_command->false_case);
+      PRINT_DEFERRED_HEREDOCS ("");
+      indentation -= indentation_amount;
+    }
+  semicolon ();
+  newline ("fi");
+}
+
+#if defined (DPAREN_ARITHMETIC) || defined (ARITH_FOR_COMMAND)
+void
+print_arith_command (arith_cmd_list)
+     WORD_LIST *arith_cmd_list;
+{
+  cprintf ("((");
+  command_print_word_list (arith_cmd_list, " ");
+  cprintf ("))");
+}
+#endif
+
+#if defined (COND_COMMAND)
+static void
+print_cond_node (cond)
+     COND_COM *cond;
+{
+  if (cond->flags & CMD_INVERT_RETURN)
+    cprintf ("! ");
+
+  if (cond->type == COND_EXPR)
+    {
+      cprintf ("( ");
+      print_cond_node (cond->left);
+      cprintf (" )");
+    }
+  else if (cond->type == COND_AND)
+    {
+      print_cond_node (cond->left);
+      cprintf (" && ");
+      print_cond_node (cond->right);
+    }
+  else if (cond->type == COND_OR)
+    {
+      print_cond_node (cond->left);
+      cprintf (" || ");
+      print_cond_node (cond->right);
+    }
+  else if (cond->type == COND_UNARY)
+    {
+      cprintf ("%s", cond->op->word);
+      cprintf (" ");
+      print_cond_node (cond->left);
+    }
+  else if (cond->type == COND_BINARY)
+    {
+      print_cond_node (cond->left);
+      cprintf (" ");
+      cprintf ("%s", cond->op->word);
+      cprintf (" ");
+      print_cond_node (cond->right);
+    }
+  else if (cond->type == COND_TERM)
+    {
+      cprintf ("%s", cond->op->word);		/* need to add quoting here */
+    }
+}
+
+void
+print_cond_command (cond)
+     COND_COM *cond;
+{
+  cprintf ("[[ ");
+  print_cond_node (cond);
+  cprintf (" ]]");
+}
+
+#ifdef DEBUG
+void
+debug_print_word_list (s, list, sep)
+     char *s;
+     WORD_LIST *list;
+     char *sep;
+{
+  WORD_LIST *w;
+
+  if (s)
+    fprintf (stderr, "%s: ", s);
+  for (w = list; w; w = w->next)
+    fprintf (stderr, "%s%s", w->word->word, w->next ? sep : "");
+  fprintf (stderr, "\n");
+}
+
+void
+debug_print_cond_command (cond)
+     COND_COM *cond;
+{
+  fprintf (stderr, "DEBUG: ");
+  command_string_index = 0;
+  print_cond_command (cond);
+  fprintf (stderr, "%s\n", the_printed_command);
+}
+#endif
+
+void
+xtrace_print_cond_term (type, invert, op, arg1, arg2)
+     int type, invert;
+     WORD_DESC *op;
+     char *arg1, *arg2;
+{
+  CHECK_XTRACE_FP;
+  command_string_index = 0;
+  fprintf (xtrace_fp, "%s", indirection_level_string ());
+  fprintf (xtrace_fp, "[[ ");
+  if (invert)
+    fprintf (xtrace_fp, "! ");
+
+  if (type == COND_UNARY)
+    {
+      fprintf (xtrace_fp, "%s ", op->word);
+      fprintf (xtrace_fp, "%s", (arg1 && *arg1) ? arg1 : "''");
+    }
+  else if (type == COND_BINARY)
+    {
+      fprintf (xtrace_fp, "%s", (arg1 && *arg1) ? arg1 : "''");
+      fprintf (xtrace_fp, " %s ", op->word);
+      fprintf (xtrace_fp, "%s", (arg2 && *arg2) ? arg2 : "''");
+    }
+
+  fprintf (xtrace_fp, " ]]\n");
+
+  fflush (xtrace_fp);
+}	  
+#endif /* COND_COMMAND */
+
+#if defined (DPAREN_ARITHMETIC) || defined (ARITH_FOR_COMMAND)
+/* A function to print the words of an arithmetic command when set -x is on. */
+void
+xtrace_print_arith_cmd (list)
+     WORD_LIST *list;
+{
+  WORD_LIST *w;
+
+  CHECK_XTRACE_FP;
+  fprintf (xtrace_fp, "%s", indirection_level_string ());
+  fprintf (xtrace_fp, "(( ");
+  for (w = list; w; w = w->next)
+    fprintf (xtrace_fp, "%s%s", w->word->word, w->next ? " " : "");
+  fprintf (xtrace_fp, " ))\n");
+
+  fflush (xtrace_fp);
+}
+#endif
+
+void
+print_simple_command (simple_command)
+     SIMPLE_COM *simple_command;
+{
+  command_print_word_list (simple_command->words, " ");
+
+  if (simple_command->redirects)
+    {
+      cprintf (" ");
+      print_redirection_list (simple_command->redirects);
+    }
+}
+
+static void
+print_heredocs (heredocs)
+     REDIRECT *heredocs;
+{
+  REDIRECT *hdtail;
+
+  cprintf (" "); 
+  for (hdtail = heredocs; hdtail; hdtail = hdtail->next)
+    {
+      print_redirection (hdtail);
+      cprintf ("\n");
+    }
+  was_heredoc = 1;
+}
+
+static void
+print_heredoc_bodies (heredocs)
+     REDIRECT *heredocs;
+{
+  REDIRECT *hdtail;
+
+  cprintf ("\n"); 
+  for (hdtail = heredocs; hdtail; hdtail = hdtail->next)
+    {
+      print_heredoc_body (hdtail);
+      cprintf ("\n");
+    }
+  was_heredoc = 1;
+}
+
+/* Print heredocs that are attached to the command before the connector
+   represented by CSTRING.  The parsing semantics require us to print the
+   here-doc delimiters, then the connector (CSTRING), then the here-doc
+   bodies.  We print the here-doc delimiters in print_redirection_list
+   and print the connector and the bodies here. We don't print the connector
+   if it's a `;', but we use it to note not to print an extra space after the
+   last heredoc body and newline. */
+static void
+print_deferred_heredocs (cstring)
+     const char *cstring;
+{
+  /* We now print the heredoc headers in print_redirection_list */
+  if (cstring && cstring[0] && (cstring[0] != ';' || cstring[1]))
+    cprintf ("%s", cstring); 
+  if (deferred_heredocs)
+    {
+      print_heredoc_bodies (deferred_heredocs);
+      if (cstring && cstring[0] && (cstring[0] != ';' || cstring[1]))
+	cprintf (" ");	/* make sure there's at least one space */
+      dispose_redirects (deferred_heredocs);
+      was_heredoc = 1;
+    }
+  deferred_heredocs = (REDIRECT *)NULL;
+}
+      
+static void
+print_redirection_list (redirects)
+     REDIRECT *redirects;
+{
+  REDIRECT *heredocs, *hdtail, *newredir;
+  char *rw;
+
+  heredocs = (REDIRECT *)NULL;
+  hdtail = heredocs;
+
+  was_heredoc = 0;
+  while (redirects)
+    {
+      /* Defer printing the here document bodiess until we've printed the rest of the
+         redirections, but print the headers in the order they're given.  */
+      if (redirects->instruction == r_reading_until || redirects->instruction == r_deblank_reading_until)
+	{
+	  newredir = copy_redirect (redirects);
+	  newredir->next = (REDIRECT *)NULL;
+
+	  print_heredoc_header (newredir);
+
+	  if (heredocs)
+	    {
+	      hdtail->next = newredir;
+	      hdtail = newredir;
+	    }
+	  else
+	    hdtail = heredocs = newredir;
+	}
+      else if (redirects->instruction == r_duplicating_output_word && (redirects->flags & REDIR_VARASSIGN) == 0 && redirects->redirector.dest == 1)
+	{
+	  /* Temporarily translate it as the execution code does. */
+	  rw = redirects->redirectee.filename->word;
+	  if (rw && *rw != '-' && DIGIT (*rw) == 0 && EXPCHAR (*rw) == 0)
+	    redirects->instruction = r_err_and_out;
+	  print_redirection (redirects);
+	  redirects->instruction = r_duplicating_output_word;
+	}
+      else
+	print_redirection (redirects);
+
+      redirects = redirects->next;
+      if (redirects)
+	cprintf (" ");
+    }
+
+  /* Now that we've printed all the other redirections (on one line),
+     print the here documents.  If we're printing a connection, we wait until
+     we print the connector symbol, then we print the here document bodies */
+  if (heredocs && printing_connection)
+    deferred_heredocs = heredocs;
+  else if (heredocs)
+    {
+      print_heredoc_bodies (heredocs);
+      dispose_redirects (heredocs);
+    }
+}
+
+static void
+print_heredoc_header (redirect)
+     REDIRECT *redirect;
+{
+  int kill_leading;
+  char *x;
+
+  kill_leading = redirect->instruction == r_deblank_reading_until;
+
+  /* Here doc header */
+  if (redirect->rflags & REDIR_VARASSIGN)
+    cprintf ("{%s}", redirect->redirector.filename->word);
+  else if (redirect->redirector.dest != 0)
+    cprintf ("%d", redirect->redirector.dest);
+
+  /* If the here document delimiter is quoted, single-quote it. */
+  if (redirect->redirectee.filename->flags & W_QUOTED)
+    {
+      x = sh_single_quote (redirect->here_doc_eof);
+      cprintf ("<<%s%s", kill_leading ? "-" : "", x);
+      free (x);
+    }
+  else
+    cprintf ("<<%s%s", kill_leading ? "-" : "", redirect->here_doc_eof);
+}
+
+static void
+print_heredoc_body (redirect)
+     REDIRECT *redirect;
+{
+  /* Here doc body */
+  cprintf ("%s%s", redirect->redirectee.filename->word, redirect->here_doc_eof);
+}
+
+static void
+print_redirection (redirect)
+     REDIRECT *redirect;
+{
+  int redirector, redir_fd;
+  WORD_DESC *redirectee, *redir_word;
+
+  redirectee = redirect->redirectee.filename;
+  redir_fd = redirect->redirectee.dest;
+
+  redir_word = redirect->redirector.filename;
+  redirector = redirect->redirector.dest;
+
+  switch (redirect->instruction)
+    {
+    case r_input_direction:
+      if (redirect->rflags & REDIR_VARASSIGN)
+	cprintf ("{%s}", redir_word->word);
+      else if (redirector != 0)
+	cprintf ("%d", redirector);
+      cprintf ("< %s", redirectee->word);
+      break;
+
+    case r_output_direction:
+      if (redirect->rflags & REDIR_VARASSIGN)
+	cprintf ("{%s}", redir_word->word);
+      else if (redirector != 1)
+	cprintf ("%d", redirector);
+      cprintf ("> %s", redirectee->word);
+      break;
+
+    case r_inputa_direction:	/* Redirection created by the shell. */
+      cprintf ("&");
+      break;
+
+    case r_output_force:
+      if (redirect->rflags & REDIR_VARASSIGN)
+	cprintf ("{%s}", redir_word->word);
+      else if (redirector != 1)
+	cprintf ("%d", redirector);
+      cprintf (">| %s", redirectee->word);
+      break;
+
+    case r_appending_to:
+      if (redirect->rflags & REDIR_VARASSIGN)
+	cprintf ("{%s}", redir_word->word);
+      else if (redirector != 1)
+	cprintf ("%d", redirector);
+      cprintf (">> %s", redirectee->word);
+      break;
+
+    case r_input_output:
+      if (redirect->rflags & REDIR_VARASSIGN)
+	cprintf ("{%s}", redir_word->word);
+      else if (redirector != 1)
+	cprintf ("%d", redirector);
+      cprintf ("<> %s", redirectee->word);
+      break;
+
+    case r_deblank_reading_until:
+    case r_reading_until:
+      print_heredoc_header (redirect);
+      cprintf ("\n");
+      print_heredoc_body (redirect);
+      break;
+
+    case r_reading_string:
+      if (redirect->rflags & REDIR_VARASSIGN)
+	cprintf ("{%s}", redir_word->word);
+      else if (redirector != 0)
+	cprintf ("%d", redirector);
+#if 0
+      /* Don't need to check whether or not to requote, since original quotes
+         are still intact.  The only thing that has happened is that $'...'
+         has been replaced with 'expanded ...'. */
+      if (ansic_shouldquote (redirect->redirectee.filename->word))
+	{
+	  char *x;
+	  x = ansic_quote (redirect->redirectee.filename->word, 0, (int *)0);
+	  cprintf ("<<< %s", x);
+	  free (x);
+	}
+      else
+#endif
+	cprintf ("<<< %s", redirect->redirectee.filename->word);
+      break;
+
+    case r_duplicating_input:
+      if (redirect->rflags & REDIR_VARASSIGN)
+	cprintf ("{%s}<&%d", redir_word->word, redir_fd);
+      else
+	cprintf ("%d<&%d", redirector, redir_fd);
+      break;
+
+    case r_duplicating_output:
+      if (redirect->rflags & REDIR_VARASSIGN)
+	cprintf ("{%s}>&%d", redir_word->word, redir_fd);
+      else
+	cprintf ("%d>&%d", redirector, redir_fd);
+      break;
+
+    case r_duplicating_input_word:
+      if (redirect->rflags & REDIR_VARASSIGN)
+	cprintf ("{%s}<&%s", redir_word->word, redirectee->word);
+      else
+	cprintf ("%d<&%s", redirector, redirectee->word);
+      break;
+
+    case r_duplicating_output_word:
+      if (redirect->rflags & REDIR_VARASSIGN)
+	cprintf ("{%s}>&%s", redir_word->word, redirectee->word);
+      else
+	cprintf ("%d>&%s", redirector, redirectee->word);
+      break;
+
+    case r_move_input:
+      if (redirect->rflags & REDIR_VARASSIGN)
+	cprintf ("{%s}<&%d-", redir_word->word, redir_fd);
+      else
+	cprintf ("%d<&%d-", redirector, redir_fd);
+      break;
+
+    case r_move_output:
+      if (redirect->rflags & REDIR_VARASSIGN)
+	cprintf ("{%s}>&%d-", redir_word->word, redir_fd);
+      else
+	cprintf ("%d>&%d-", redirector, redir_fd);
+      break;
+
+    case r_move_input_word:
+      if (redirect->rflags & REDIR_VARASSIGN)
+	cprintf ("{%s}<&%s-", redir_word->word, redirectee->word);
+      else
+	cprintf ("%d<&%s-", redirector, redirectee->word);
+      break;
+
+    case r_move_output_word:
+      if (redirect->rflags & REDIR_VARASSIGN)
+	cprintf ("{%s}>&%s-", redir_word->word, redirectee->word);
+      else
+	cprintf ("%d>&%s-", redirector, redirectee->word);
+      break;
+
+    case r_close_this:
+      if (redirect->rflags & REDIR_VARASSIGN)
+	cprintf ("{%s}>&-", redir_word->word);
+      else
+	cprintf ("%d>&-", redirector);
+      break;
+
+    case r_err_and_out:
+      cprintf ("&> %s", redirectee->word);
+      break;
+
+    case r_append_err_and_out:
+      cprintf ("&>> %s", redirectee->word);
+      break;
+    }
+}
+
+static void
+reset_locals ()
+{
+  inside_function_def = 0;
+  indentation = 0;
+  printing_connection = 0;
+  deferred_heredocs = 0;
+}
+
+static void
+print_function_def (func)
+     FUNCTION_DEF *func;
+{
+  COMMAND *cmdcopy;
+  REDIRECT *func_redirects;
+
+  func_redirects = NULL;
+  /* When in posix mode, print functions as posix specifies them. */
+  if (posixly_correct == 0)
+    cprintf ("function %s () \n", func->name->word);
+  else
+    cprintf ("%s () \n", func->name->word);
+  add_unwind_protect (reset_locals, 0);
+
+  indent (indentation);
+  cprintf ("{ \n");
+
+  inside_function_def++;
+  indentation += indentation_amount;
+
+  cmdcopy = copy_command (func->command);
+  if (cmdcopy->type == cm_group)
+    {
+      func_redirects = cmdcopy->redirects;
+      cmdcopy->redirects = (REDIRECT *)NULL;
+    }
+  make_command_string_internal (cmdcopy->type == cm_group
+					? cmdcopy->value.Group->command
+					: cmdcopy);
+  PRINT_DEFERRED_HEREDOCS ("");
+
+  remove_unwind_protect ();
+  indentation -= indentation_amount;
+  inside_function_def--;
+
+  if (func_redirects)
+    { /* { */
+      newline ("} ");
+      print_redirection_list (func_redirects);
+      cmdcopy->redirects = func_redirects;
+    }
+  else
+    newline ("}");
+
+  dispose_command (cmdcopy);
+}
+
+/* Return the string representation of the named function.
+   NAME is the name of the function.
+   COMMAND is the function body.  It should be a GROUP_COM.
+   flags&FUNC_MULTILINE is non-zero to pretty-print, or zero for all on one line.
+   flags&FUNC_EXTERNAL means convert from internal to external form
+  */
+char *
+named_function_string (name, command, flags)
+     char *name;
+     COMMAND *command;
+     int flags;
+{
+  char *result;
+  int old_indent, old_amount;
+  COMMAND *cmdcopy;
+  REDIRECT *func_redirects;
+
+  old_indent = indentation;
+  old_amount = indentation_amount;
+  command_string_index = was_heredoc = 0;
+  deferred_heredocs = 0;
+
+  if (name && *name)
+    {
+      if (find_reserved_word (name) >= 0)
+	cprintf ("function ");
+      cprintf ("%s ", name);
+    }
+
+  cprintf ("() ");
+
+  if ((flags & FUNC_MULTILINE) == 0)
+    {
+      indentation = 1;
+      indentation_amount = 0;
+    }
+  else
+    {
+      cprintf ("\n");
+      indentation += indentation_amount;
+    }
+
+  inside_function_def++;
+
+  cprintf ((flags & FUNC_MULTILINE) ? "{ \n" : "{ ");
+
+  cmdcopy = copy_command (command);
+  /* Take any redirections specified in the function definition (which should
+     apply to the function as a whole) and save them for printing later. */
+  func_redirects = (REDIRECT *)NULL;
+  if (cmdcopy->type == cm_group)
+    {
+      func_redirects = cmdcopy->redirects;
+      cmdcopy->redirects = (REDIRECT *)NULL;
+    }
+  make_command_string_internal (cmdcopy->type == cm_group
+					? cmdcopy->value.Group->command
+					: cmdcopy);
+  PRINT_DEFERRED_HEREDOCS ("");
+
+  indentation = old_indent;
+  indentation_amount = old_amount;
+  inside_function_def--;
+
+  if (func_redirects)
+    { /* { */
+      newline ("} ");
+      print_redirection_list (func_redirects);
+      cmdcopy->redirects = func_redirects;
+    }
+  else
+    newline ("}");
+
+  result = the_printed_command;
+
+  if ((flags & FUNC_MULTILINE) == 0)
+    {
+#if 0
+      register int i;
+      for (i = 0; result[i]; i++)
+	if (result[i] == '\n')
+	  {
+	    strcpy (result + i, result + i + 1);
+	    --i;
+	  }
+#else
+      if (result[2] == '\n')	/* XXX -- experimental */
+	memmove (result + 2, result + 3, strlen (result) - 2);	
+#endif
+    }
+
+  dispose_command (cmdcopy);
+
+  if (flags & FUNC_EXTERNAL)
+    result = remove_quoted_escapes (result);
+
+  return (result);
+}
+
+static void
+newline (string)
+     char *string;
+{
+  cprintf ("\n");
+  indent (indentation);
+  if (string && *string)
+    cprintf ("%s", string);
+}
+
+static char *indentation_string;
+static int indentation_size;
+
+static void
+indent (amount)
+     int amount;
+{
+  register int i;
+
+  RESIZE_MALLOCED_BUFFER (indentation_string, 0, amount, indentation_size, 16);
+
+  for (i = 0; amount > 0; amount--)
+    indentation_string[i++] = ' ';
+  indentation_string[i] = '\0';
+  cprintf ("%s", indentation_string);
+}
+
+static void
+semicolon ()
+{
+  if (command_string_index > 0 &&
+       (the_printed_command[command_string_index - 1] == '&' ||
+	the_printed_command[command_string_index - 1] == '\n'))
+    return;
+  cprintf (";");
+}
+
+/* How to make the string. */
+static void
+#if defined (PREFER_STDARG)
+cprintf (const char *control, ...)
+#else
+cprintf (control, va_alist)
+     const char *control;
+     va_dcl
+#endif
+{
+  register const char *s;
+  char char_arg[2], *argp, intbuf[INT_STRLEN_BOUND (unsigned int) + 1];
+  int digit_arg, arg_len, c;
+  va_list args;
+
+  SH_VA_START (args, control);
+
+  arg_len = strlen (control);
+  the_printed_command_resize (arg_len + 1);
+
+  char_arg[1] = '\0';
+  s = control;
+  while (s && *s)
+    {
+      c = *s++;
+      argp = (char *)NULL;
+      if (c != '%' || !*s)
+	{
+	  char_arg[0] = c;
+	  argp = char_arg;
+	  arg_len = 1;
+	}
+      else
+	{
+	  c = *s++;
+	  switch (c)
+	    {
+	    case '%':
+	      char_arg[0] = c;
+	      argp = char_arg;
+	      arg_len = 1;
+	      break;
+
+	    case 's':
+	      argp = va_arg (args, char *);
+	      arg_len = strlen (argp);
+	      break;
+
+	    case 'd':
+	      /* Represent an out-of-range file descriptor with an out-of-range
+		 integer value.  We can do this because the only use of `%d' in
+		 the calls to cprintf is to output a file descriptor number for
+		 a redirection. */
+	      digit_arg = va_arg (args, int);
+	      if (digit_arg < 0)
+		{
+		  sprintf (intbuf, "%u", (unsigned int)-1);
+		  argp = intbuf;
+		}
+	      else
+		argp = inttostr (digit_arg, intbuf, sizeof (intbuf));
+	      arg_len = strlen (argp);
+	      break;
+
+	    case 'c':
+	      char_arg[0] = va_arg (args, int);
+	      argp = char_arg;
+	      arg_len = 1;
+	      break;
+
+	    default:
+	      programming_error (_("cprintf: `%c': invalid format character"), c);
+	      /*NOTREACHED*/
+	    }
+	}
+
+      if (argp && arg_len)
+	{
+	  the_printed_command_resize (arg_len + 1);
+	  FASTCOPY (argp, the_printed_command + command_string_index, arg_len);
+	  command_string_index += arg_len;
+	}
+    }
+
+  va_end (args);
+
+  the_printed_command[command_string_index] = '\0';
+}
+
+/* Ensure that there is enough space to stuff LENGTH characters into
+   THE_PRINTED_COMMAND. */
+static void
+the_printed_command_resize (length)
+     int length;
+{
+  if (the_printed_command == 0)
+    {
+      the_printed_command_size = (length + PRINTED_COMMAND_INITIAL_SIZE - 1) & ~(PRINTED_COMMAND_INITIAL_SIZE - 1);
+      the_printed_command = (char *)xmalloc (the_printed_command_size);
+      command_string_index = 0;
+    }
+  else if ((command_string_index + length) >= the_printed_command_size)
+    {
+      int new;
+      new = command_string_index + length + 1;
+
+      /* Round up to the next multiple of PRINTED_COMMAND_GROW_SIZE. */
+      new = (new + PRINTED_COMMAND_GROW_SIZE - 1) & ~(PRINTED_COMMAND_GROW_SIZE - 1);
+      the_printed_command_size = new;
+
+      the_printed_command = (char *)xrealloc (the_printed_command, the_printed_command_size);
+    }
+}
+
+#if defined (HAVE_VPRINTF)
+/* ``If vprintf is available, you may assume that vfprintf and vsprintf are
+     also available.'' */
+
+static void
+#if defined (PREFER_STDARG)
+xprintf (const char *format, ...)
+#else
+xprintf (format, va_alist)
+     const char *format;
+     va_dcl
+#endif
+{
+  va_list args;
+
+  SH_VA_START (args, format);
+
+  vfprintf (stdout, format, args);
+  va_end (args);
+}
+
+#else
+
+static void
+xprintf (format, arg1, arg2, arg3, arg4, arg5)
+     const char *format;
+{
+  printf (format, arg1, arg2, arg3, arg4, arg5);
+}
+
+#endif /* !HAVE_VPRINTF */
diff --git a/quit.h b/quit.h
new file mode 100644
index 0000000..db8a776
--- /dev/null
+++ b/quit.h
@@ -0,0 +1,81 @@
+/* quit.h -- How to handle SIGINT gracefully. */
+
+/* Copyright (C) 1993-2013 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_QUIT_H_)
+#define _QUIT_H_
+
+#include "sig.h"	/* for sig_atomic_t */
+
+/* Non-zero means SIGINT has already occurred. */
+extern volatile sig_atomic_t interrupt_state;
+extern volatile sig_atomic_t terminating_signal;
+
+/* Macro to call a great deal.  SIGINT just sets the interrupt_state variable.
+   When it is safe, put QUIT in the code, and the "interrupt" will take
+   place.  The same scheme is used for terminating signals (e.g., SIGHUP)
+   and the terminating_signal variable.  That calls a function which will
+   end up exiting the shell. */
+#define QUIT \
+  do { \
+    if (terminating_signal) termsig_handler (terminating_signal); \
+    if (interrupt_state) throw_to_top_level (); \
+  } while (0)
+
+#define CHECK_ALRM \
+  do { \
+    if (sigalrm_seen) \
+      sh_longjmp (alrmbuf, 1); \
+  } while (0)
+
+#define SETINTERRUPT interrupt_state = 1
+#define CLRINTERRUPT interrupt_state = 0
+
+#define ADDINTERRUPT interrupt_state++
+#define DELINTERRUPT interrupt_state--
+
+#define ISINTERRUPT interrupt_state != 0
+
+/* The same sort of thing, this time just for signals that would ordinarily
+   cause the shell to terminate. */
+
+#define CHECK_TERMSIG \
+  do { \
+    if (terminating_signal) termsig_handler (terminating_signal); \
+  } while (0)
+
+#define LASTSIG() \
+  (terminating_signal ? terminating_signal : (interrupt_state ? SIGINT : 0))
+
+#define CHECK_WAIT_INTR \
+  do { \
+    if (wait_intr_flag && wait_signal_received && this_shell_builtin && (this_shell_builtin == wait_builtin)) \
+      sh_longjmp (wait_intr_buf, 1); \
+  } while (0)
+
+#define RESET_SIGTERM \
+  do { \
+    sigterm_received = 0; \
+  } while (0)
+
+#define CHECK_SIGTERM \
+  do { \
+    if (sigterm_received) termsig_handler (SIGTERM); \
+  } while (0)
+#endif /* _QUIT_H_ */
diff --git a/redir.c b/redir.c
new file mode 100644
index 0000000..fa92b4d
--- /dev/null
+++ b/redir.c
@@ -0,0 +1,1505 @@
+/* redir.c -- Functions to perform input and output redirection. */
+
+/* Copyright (C) 1997-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#if !defined (__GNUC__) && !defined (HAVE_ALLOCA_H) && defined (_AIX)
+  #pragma alloca
+#endif /* _AIX && RISC6000 && !__GNUC__ */
+
+#include <stdio.h>
+#include "bashtypes.h"
+#if !defined (_MINIX) && defined (HAVE_SYS_FILE_H)
+#  include <sys/file.h>
+#endif
+#include "filecntl.h"
+#include "posixstat.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <errno.h>
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+#include "bashansi.h"
+#include "bashintl.h"
+#include "memalloc.h"
+
+#define NEED_FPURGE_DECL
+
+#include "shell.h"
+#include "flags.h"
+#include "execute_cmd.h"
+#include "redir.h"
+#include "trap.h"
+
+#if defined (BUFFERED_INPUT)
+#  include "input.h"
+#endif
+
+#include "builtins/pipesize.h"
+
+/* FreeBSD 13 can reliably handle atomic writes at this capacity without
+   hanging. */
+#if __FreeBSD__ && !defined (HEREDOC_PIPESIZE)
+#  define HEREDOC_PIPESIZE 4096
+#endif
+
+/* Normally set by a build process command that computes pipe capacity */
+#ifndef PIPESIZE
+#  ifdef PIPE_BUF
+#    define PIPESIZE PIPE_BUF
+#  else
+#    define PIPESIZE 4096
+#  endif
+#endif
+
+#ifndef HEREDOC_PIPESIZE
+#  define HEREDOC_PIPESIZE PIPESIZE
+#endif
+
+#if defined (HEREDOC_PIPEMAX)
+#  if HEREDOC_PIPESIZE > HEREDOC_PIPEMAX
+#    define HEREDOC_PIPESIZE HEREDOC_PIPEMAX
+#  endif
+#endif
+
+#define SHELL_FD_BASE	10
+
+int expanding_redir;
+
+extern REDIRECT *redirection_undo_list;
+extern REDIRECT *exec_redirection_undo_list;
+
+/* Static functions defined and used in this file. */
+static void add_exec_redirect PARAMS((REDIRECT *));
+static int add_undo_redirect PARAMS((int, enum r_instruction, int));
+static int add_undo_close_redirect PARAMS((int));
+static int expandable_redirection_filename PARAMS((REDIRECT *));
+static int stdin_redirection PARAMS((enum r_instruction, int));
+static int undoablefd PARAMS((int));
+static int do_redirection_internal PARAMS((REDIRECT *, int, char **));
+
+static char *heredoc_expand PARAMS((WORD_DESC *, enum r_instruction, size_t *));
+static int heredoc_write PARAMS((int, char *, size_t));
+static int here_document_to_fd PARAMS((WORD_DESC *, enum r_instruction));
+
+static int redir_special_open PARAMS((int, char *, int, int, enum r_instruction));
+static int noclobber_open PARAMS((char *, int, int, enum r_instruction));
+static int redir_open PARAMS((char *, int, int, enum r_instruction));
+
+static int redir_varassign PARAMS((REDIRECT *, int));
+static int redir_varvalue PARAMS((REDIRECT *));
+
+/* Spare redirector used when translating [N]>&WORD[-] or [N]<&WORD[-] to
+   a new redirection and when creating the redirection undo list. */
+static REDIRECTEE rd;
+
+/* Set to errno when a here document cannot be created for some reason.
+   Used to print a reasonable error message. */
+static int heredoc_errno;
+
+#define REDIRECTION_ERROR(r, e, fd) \
+do { \
+  if ((r) < 0) \
+    { \
+      if (fd >= 0) \
+	close (fd); \
+      set_exit_status (EXECUTION_FAILURE);\
+      return ((e) == 0 ? EINVAL : (e));\
+    } \
+} while (0)
+
+void
+redirection_error (temp, error, fn)
+     REDIRECT *temp;
+     int error;
+     char *fn;		/* already-expanded filename */
+{
+  char *filename, *allocname;
+  int oflags;
+
+  allocname = 0;
+  if ((temp->rflags & REDIR_VARASSIGN) && error < 0)
+    filename = allocname = savestring (temp->redirector.filename->word);
+  else if ((temp->rflags & REDIR_VARASSIGN) == 0 && temp->redirector.dest < 0)
+    /* This can happen when read_token_word encounters overflow, like in
+       exec 4294967297>x */
+    filename = _("file descriptor out of range");
+#ifdef EBADF
+  /* This error can never involve NOCLOBBER */
+  else if (error != NOCLOBBER_REDIRECT && temp->redirector.dest >= 0 && error == EBADF)
+    {
+      /* If we're dealing with two file descriptors, we have to guess about
+         which one is invalid; in the cases of r_{duplicating,move}_input and
+         r_{duplicating,move}_output we're here because dup2() failed. */
+      switch (temp->instruction)
+        {
+        case r_duplicating_input:
+        case r_duplicating_output:
+        case r_move_input:
+        case r_move_output:
+	  filename = allocname = itos (temp->redirectee.dest);
+	  break;
+	case r_duplicating_input_word:
+	  if (temp->redirector.dest == 0)	/* Guess */
+	    filename = temp->redirectee.filename->word;	/* XXX */
+	  else
+	    filename = allocname = itos (temp->redirector.dest);
+	  break;
+	case r_duplicating_output_word:
+	  if (temp->redirector.dest == 1)	/* Guess */
+	    filename = temp->redirectee.filename->word;	/* XXX */
+	  else
+	    filename = allocname = itos (temp->redirector.dest);
+	  break;
+	default:
+	  filename = allocname = itos (temp->redirector.dest);
+	  break;
+        }
+    }
+#endif
+  else if (fn)
+    filename = fn;
+  else if (expandable_redirection_filename (temp))
+    {
+      oflags = temp->redirectee.filename->flags;
+      if (posixly_correct && interactive_shell == 0)
+	temp->redirectee.filename->flags |= W_NOGLOB;
+      temp->redirectee.filename->flags |= W_NOCOMSUB;
+      filename = allocname = redirection_expand (temp->redirectee.filename);
+      temp->redirectee.filename->flags = oflags;
+      if (filename == 0)
+	filename = temp->redirectee.filename->word;
+    }
+  else if (temp->redirectee.dest < 0)
+    filename = _("file descriptor out of range");
+  else
+    filename = allocname = itos (temp->redirectee.dest);
+
+  switch (error)
+    {
+    case AMBIGUOUS_REDIRECT:
+      internal_error (_("%s: ambiguous redirect"), filename);
+      break;
+
+    case NOCLOBBER_REDIRECT:
+      internal_error (_("%s: cannot overwrite existing file"), filename);
+      break;
+
+#if defined (RESTRICTED_SHELL)
+    case RESTRICTED_REDIRECT:
+      internal_error (_("%s: restricted: cannot redirect output"), filename);
+      break;
+#endif /* RESTRICTED_SHELL */
+
+    case HEREDOC_REDIRECT:
+      internal_error (_("cannot create temp file for here-document: %s"), strerror (heredoc_errno));
+      break;
+
+    case BADVAR_REDIRECT:
+      internal_error (_("%s: cannot assign fd to variable"), filename);
+      break;
+
+    default:
+      internal_error ("%s: %s", filename, strerror (error));
+      break;
+    }
+
+  FREE (allocname);
+}
+
+/* Perform the redirections on LIST.  If flags & RX_ACTIVE, then actually
+   make input and output file descriptors, otherwise just do whatever is
+   necessary for side effecting.  flags & RX_UNDOABLE says to remember
+   how to undo the redirections later, if non-zero.  If flags & RX_CLEXEC
+   is non-zero, file descriptors opened in do_redirection () have their
+   close-on-exec flag set. */
+int
+do_redirections (list, flags)
+     REDIRECT *list;
+     int flags;
+{
+  int error;
+  REDIRECT *temp;
+  char *fn;
+
+  if (flags & RX_UNDOABLE)
+    {
+      if (redirection_undo_list)
+	{
+	  dispose_redirects (redirection_undo_list);
+	  redirection_undo_list = (REDIRECT *)NULL;
+	}
+      if (exec_redirection_undo_list)
+	dispose_exec_redirects ();
+    }
+
+  for (temp = list; temp; temp = temp->next)
+    {
+      fn = 0;
+      error = do_redirection_internal (temp, flags, &fn);
+      if (error)
+	{
+	  redirection_error (temp, error, fn);
+	  FREE (fn);
+	  return (error);
+	}
+      FREE (fn);
+    }
+  return (0);
+}
+
+/* Return non-zero if the redirection pointed to by REDIRECT has a
+   redirectee.filename that can be expanded. */
+static int
+expandable_redirection_filename (redirect)
+     REDIRECT *redirect;
+{
+  switch (redirect->instruction)
+    {
+    case r_output_direction:
+    case r_appending_to:
+    case r_input_direction:
+    case r_inputa_direction:
+    case r_err_and_out:
+    case r_append_err_and_out:
+    case r_input_output:
+    case r_output_force:
+    case r_duplicating_input_word:
+    case r_duplicating_output_word:
+    case r_move_input_word:
+    case r_move_output_word:
+      return 1;
+
+    default:
+      return 0;
+    }
+}
+
+/* Expand the word in WORD returning a string.  If WORD expands to
+   multiple words (or no words), then return NULL. */
+char *
+redirection_expand (word)
+     WORD_DESC *word;
+{
+  char *result;
+  WORD_LIST *tlist1, *tlist2;
+  WORD_DESC *w;
+  int old;
+
+  w = copy_word (word);
+  if (posixly_correct)
+    w->flags |= W_NOSPLIT;
+
+  tlist1 = make_word_list (w, (WORD_LIST *)NULL);
+  expanding_redir = 1;
+  /* Now that we've changed the variable search order to ignore the temp
+     environment, see if we need to change the cached IFS values. */
+  sv_ifs ("IFS");
+  tlist2 = expand_words_no_vars (tlist1);
+  expanding_redir = 0;
+  /* Now we need to change the variable search order back to include the temp
+     environment.  We force the temp environment search by forcing
+     executing_builtin to 1.  This is what makes `read' get the right values
+     for the IFS-related cached variables, for example. */
+  old = executing_builtin;
+  executing_builtin = 1;
+  sv_ifs ("IFS");
+  executing_builtin = old;
+  dispose_words (tlist1);
+
+  if (tlist2 == 0 || tlist2->next)
+    {
+      /* We expanded to no words, or to more than a single word.
+	 Dispose of the word list and return NULL. */
+      if (tlist2)
+	dispose_words (tlist2);
+      return ((char *)NULL);
+    }
+  result = string_list (tlist2);  /* XXX savestring (tlist2->word->word)? */
+  dispose_words (tlist2);
+  return (result);
+}
+
+/* Expand a here-document or here-string (determined by RI) contained in
+   REDIRECTEE and return the expanded document. If LENP is non-zero, put
+   the length of the returned string into *LENP.
+
+   This captures everything about expanding here-documents and here-strings:
+   the returned document should be written directly to whatever file
+   descriptor is specified. In particular, it adds a newline to the end of
+   a here-string to preserve previous semantics. */
+static char *
+heredoc_expand (redirectee, ri, lenp)
+     WORD_DESC *redirectee;
+     enum r_instruction ri;
+     size_t *lenp;
+{
+  char *document;
+  size_t dlen;
+  int old;
+
+  if (redirectee->word == 0 || redirectee->word[0] == '\0')
+    {
+      if (lenp)
+        *lenp = 0;
+      return (redirectee->word);
+    }
+
+  /* Quoted here documents are not expanded */
+  if (ri != r_reading_string && (redirectee->flags & W_QUOTED))
+    {
+      if (lenp)
+        *lenp = STRLEN (redirectee->word);
+      return (redirectee->word);
+    }
+  
+  expanding_redir = 1;
+  /* Now that we've changed the variable search order to ignore the temp
+     environment, see if we need to change the cached IFS values. */
+  sv_ifs ("IFS");
+  document = (ri == r_reading_string) ? expand_assignment_string_to_string (redirectee->word, 0)
+  				      : expand_string_to_string (redirectee->word, Q_HERE_DOCUMENT);
+  expanding_redir = 0;
+  /* Now we need to change the variable search order back to include the temp
+     environment.  We force the temp environment search by forcing
+     executing_builtin to 1.  This is what makes `read' get the right values
+     for the IFS-related cached variables, for example. */
+  old = executing_builtin;
+  executing_builtin = 1;
+  sv_ifs ("IFS");
+  executing_builtin = old;
+
+  dlen = STRLEN (document);
+  /* XXX - Add trailing newline to here-string */
+  if (ri == r_reading_string)
+    {
+      document = xrealloc (document, dlen + 2);
+      document[dlen++] = '\n';
+      document[dlen] = '\0';
+    }
+  if (lenp)
+    *lenp = dlen;    
+
+  return document;
+}
+
+/* Write HEREDOC (of length HDLEN) to FD, returning 0 on success and ERRNO on
+   error. Don't handle interrupts. */
+static int
+heredoc_write (fd, heredoc, herelen)
+     int fd;
+     char *heredoc;
+     size_t herelen;
+{
+  ssize_t nw;
+  int e;
+
+  errno = 0;
+  nw = write (fd, heredoc, herelen);
+  e = errno;
+  if (nw != herelen)
+    {
+      if (e == 0)
+	e = ENOSPC;
+      return e;
+    }
+  return 0;
+}
+
+/* Create a temporary file or pipe holding the text of the here document
+   pointed to by REDIRECTEE, and return a file descriptor open for reading
+   to it. Return -1 on any error, and make sure errno is set appropriately. */
+static int
+here_document_to_fd (redirectee, ri)
+     WORD_DESC *redirectee;
+     enum r_instruction ri;
+{
+  char *filename;
+  int r, fd, fd2, herepipe[2];
+  char *document;
+  size_t document_len;
+#if HEREDOC_PARANOID
+  struct stat st1, st2;
+#endif
+
+  /* Expand the here-document/here-string first and then decide what to do. */
+  document = heredoc_expand (redirectee, ri, &document_len);
+
+  /* If we have a zero-length document, don't mess with a temp file */
+  if (document_len == 0)
+    {
+      fd = open ("/dev/null", O_RDONLY);
+      r = errno;
+      if (document != redirectee->word)
+	FREE (document);
+      errno = r;
+      return fd;
+    }
+
+#if defined (HEREDOC_PIPESIZE)
+  /* Try to use a pipe internal to this process if the document is shorter
+     than the system's pipe capacity (computed at build time). We want to
+     write the entire document without write blocking. */
+  if (document_len <= HEREDOC_PIPESIZE)
+    {
+      if (pipe (herepipe) < 0)
+	{
+	  r = errno;
+	  if (document != redirectee->word)
+	    free (document);
+	  errno = r;
+	  return (-1);
+	}
+
+#if defined (F_GETPIPE_SZ)
+      if (fcntl (herepipe[1], F_GETPIPE_SZ, 0) < document_len)
+	goto use_tempfile;
+#endif
+
+      r = heredoc_write (herepipe[1], document, document_len);
+      if (document != redirectee->word)
+	free (document);
+      close (herepipe[1]);
+      if (r)			/* write error */
+	{
+	  close (herepipe[0]);
+	  errno = r;
+	  return (-1);
+	}
+      return (herepipe[0]);
+    }
+#endif
+
+use_tempfile:
+
+  fd = sh_mktmpfd ("sh-thd", MT_USERANDOM|MT_USETMPDIR, &filename);
+
+  /* If we failed for some reason other than the file existing, abort */
+  if (fd < 0)
+    {
+      r = errno;
+      FREE (filename);
+      if (document != redirectee->word)
+	FREE (document);
+      errno = r;
+      return (fd);
+    }
+
+  fchmod (fd, S_IRUSR | S_IWUSR);
+  SET_CLOSE_ON_EXEC (fd);
+
+  errno = r = 0;		/* XXX */
+  r = heredoc_write (fd, document, document_len);
+  if (document != redirectee->word)
+    FREE (document);
+
+  if (r)
+    {
+      close (fd);
+      unlink (filename);
+      free (filename);
+      errno = r;
+      return (-1);
+    }
+
+  /* In an attempt to avoid races, we close the first fd only after opening
+     the second. */
+  /* Make the document really temporary.  Also make it the input. */
+  fd2 = open (filename, O_RDONLY|O_BINARY, 0600);
+
+  if (fd2 < 0)
+    {
+      r = errno;
+      unlink (filename);
+      free (filename);
+      close (fd);
+      errno = r;
+      return -1;
+    }
+
+#if HEREDOC_PARANOID
+  /* We can use same_file here to check whether or not fd and fd2 refer to
+     the same file, but we don't do that unless HEREDOC_PARANOID is defined. */
+  if (fstat (fd, &st1) < 0 || S_ISREG (st1.st_mode) == 0 ||
+      fstat (fd2, &st2) < 0 || S_ISREG (st2.st_mode) == 0 ||
+      same_file (filename, filename, &st1, &st2) == 0)
+    {
+      unlink (filename);
+      free (filename);
+      close (fd);
+      close (fd2);
+      errno = EEXIST;
+      return -1;
+    }
+#endif
+
+  close (fd);
+  if (unlink (filename) < 0)
+    {
+      r = errno;
+      close (fd2);
+      free (filename);
+      errno = r;
+      return (-1);
+    }
+
+  free (filename);
+
+  fchmod (fd2, S_IRUSR);
+  return (fd2);
+}
+
+#define RF_DEVFD	1
+#define RF_DEVSTDERR	2
+#define RF_DEVSTDIN	3
+#define RF_DEVSTDOUT	4
+#define RF_DEVTCP	5
+#define RF_DEVUDP	6
+
+/* A list of pattern/value pairs for filenames that the redirection
+   code handles specially. */
+static STRING_INT_ALIST _redir_special_filenames[] = {
+#if !defined (HAVE_DEV_FD)
+  { "/dev/fd/[0-9]*", RF_DEVFD },
+#endif
+#if !defined (HAVE_DEV_STDIN)
+  { "/dev/stderr", RF_DEVSTDERR },
+  { "/dev/stdin", RF_DEVSTDIN },
+  { "/dev/stdout", RF_DEVSTDOUT },
+#endif
+#if defined (NETWORK_REDIRECTIONS)
+  { "/dev/tcp/*/*", RF_DEVTCP },
+  { "/dev/udp/*/*", RF_DEVUDP },
+#endif
+  { (char *)NULL, -1 }
+};
+
+static int
+redir_special_open (spec, filename, flags, mode, ri)
+     int spec;
+     char *filename;
+     int flags, mode;
+     enum r_instruction ri;
+{
+  int fd;
+#if !defined (HAVE_DEV_FD)
+  intmax_t lfd;
+#endif
+
+  fd = -1;
+  switch (spec)
+    {
+#if !defined (HAVE_DEV_FD)
+    case RF_DEVFD:
+      if (all_digits (filename+8) && legal_number (filename+8, &lfd) && lfd == (int)lfd)
+	{
+	  fd = lfd;
+	  fd = fcntl (fd, F_DUPFD, SHELL_FD_BASE);
+	}
+      else
+	fd = AMBIGUOUS_REDIRECT;
+      break;
+#endif
+
+#if !defined (HAVE_DEV_STDIN)
+    case RF_DEVSTDIN:
+      fd = fcntl (0, F_DUPFD, SHELL_FD_BASE);
+      break;
+    case RF_DEVSTDOUT:
+      fd = fcntl (1, F_DUPFD, SHELL_FD_BASE);
+      break;
+    case RF_DEVSTDERR:
+      fd = fcntl (2, F_DUPFD, SHELL_FD_BASE);
+      break;
+#endif
+
+#if defined (NETWORK_REDIRECTIONS)
+    case RF_DEVTCP:
+    case RF_DEVUDP:
+#if defined (RESTRICTED_SHELL)
+      if (restricted)
+	return (RESTRICTED_REDIRECT);
+#endif
+#if defined (HAVE_NETWORK)
+      fd = netopen (filename);
+#else
+      internal_warning (_("/dev/(tcp|udp)/host/port not supported without networking"));
+      fd = open (filename, flags, mode);
+#endif
+      break;
+#endif /* NETWORK_REDIRECTIONS */
+    }
+
+  return fd;
+}
+      
+/* Open FILENAME with FLAGS in noclobber mode, hopefully avoiding most
+   race conditions and avoiding the problem where the file is replaced
+   between the stat(2) and open(2). */
+static int
+noclobber_open (filename, flags, mode, ri)
+     char *filename;
+     int flags, mode;
+     enum r_instruction ri;
+{
+  int r, fd;
+  struct stat finfo, finfo2;
+
+  /* If the file exists and is a regular file, return an error
+     immediately. */
+  r = stat (filename, &finfo);
+  if (r == 0 && (S_ISREG (finfo.st_mode)))
+    return (NOCLOBBER_REDIRECT);
+
+  /* If the file was not present (r != 0), make sure we open it
+     exclusively so that if it is created before we open it, our open
+     will fail.  Make sure that we do not truncate an existing file.
+     Note that we don't turn on O_EXCL unless the stat failed -- if
+     the file was not a regular file, we leave O_EXCL off. */
+  flags &= ~O_TRUNC;
+  if (r != 0)
+    {
+      fd = open (filename, flags|O_EXCL, mode);
+      return ((fd < 0 && errno == EEXIST) ? NOCLOBBER_REDIRECT : fd);
+    }
+  fd = open (filename, flags, mode);
+
+  /* If the open failed, return the file descriptor right away. */
+  if (fd < 0)
+    return (errno == EEXIST ? NOCLOBBER_REDIRECT : fd);
+
+  /* OK, the open succeeded, but the file may have been changed from a
+     non-regular file to a regular file between the stat and the open.
+     We are assuming that the O_EXCL open handles the case where FILENAME
+     did not exist and is symlinked to an existing file between the stat
+     and open. */
+
+  /* If we can open it and fstat the file descriptor, and neither check
+     revealed that it was a regular file, and the file has not been replaced,
+     return the file descriptor. */
+  if ((fstat (fd, &finfo2) == 0) && (S_ISREG (finfo2.st_mode) == 0) &&
+      r == 0 && (S_ISREG (finfo.st_mode) == 0) &&
+      same_file (filename, filename, &finfo, &finfo2))
+    return fd;
+
+  /* The file has been replaced.  badness. */
+  close (fd);  
+  errno = EEXIST;
+  return (NOCLOBBER_REDIRECT);
+}
+
+static int
+redir_open (filename, flags, mode, ri)
+     char *filename;
+     int flags, mode;
+     enum r_instruction ri;
+{
+  int fd, r, e;
+
+  r = find_string_in_alist (filename, _redir_special_filenames, 1);
+  if (r >= 0)
+    return (redir_special_open (r, filename, flags, mode, ri));
+
+  /* If we are in noclobber mode, you are not allowed to overwrite
+     existing files.  Check before opening. */
+  if (noclobber && CLOBBERING_REDIRECT (ri))
+    {
+      fd = noclobber_open (filename, flags, mode, ri);
+      if (fd == NOCLOBBER_REDIRECT)
+	return (NOCLOBBER_REDIRECT);
+    }
+  else
+    {
+      do
+	{
+	  fd = open (filename, flags, mode);
+	  e = errno;
+	  if (fd < 0 && e == EINTR)
+	    {
+	      QUIT;
+	      run_pending_traps ();
+	    }
+	  errno = e;
+	}
+      while (fd < 0 && errno == EINTR);
+
+#if defined (AFS)
+      if ((fd < 0) && (errno == EACCES))
+	{
+	  fd = open (filename, flags & ~O_CREAT, mode);
+	  errno = EACCES;	/* restore errno */
+	}
+#endif /* AFS */
+    }
+
+  return fd;
+}
+
+static int
+undoablefd (fd)
+     int fd;
+{
+  int clexec;
+
+  clexec = fcntl (fd, F_GETFD, 0);
+  if (clexec == -1 || (fd >= SHELL_FD_BASE && clexec == 1))
+    return 0;
+  return 1;
+}
+
+/* Do the specific redirection requested.  Returns errno or one of the
+   special redirection errors (*_REDIRECT) in case of error, 0 on success.
+   If flags & RX_ACTIVE is zero, then just do whatever is necessary to
+   produce the appropriate side effects.   flags & RX_UNDOABLE, if non-zero,
+   says to remember how to undo each redirection.  If flags & RX_CLEXEC is
+   non-zero, then we set all file descriptors > 2 that we open to be
+   close-on-exec. FNP, if non-null is a pointer to a location where the
+   expanded filename is stored. The caller will free it. */
+static int
+do_redirection_internal (redirect, flags, fnp)
+     REDIRECT *redirect;
+     int flags;
+     char **fnp;
+{
+  WORD_DESC *redirectee;
+  int redir_fd, fd, redirector, r, oflags;
+  intmax_t lfd;
+  char *redirectee_word;
+  enum r_instruction ri;
+  REDIRECT *new_redirect;
+  REDIRECTEE sd;
+
+  redirectee = redirect->redirectee.filename;
+  redir_fd = redirect->redirectee.dest;
+  redirector = redirect->redirector.dest;
+  ri = redirect->instruction;
+
+  if (redirect->flags & RX_INTERNAL)
+    flags |= RX_INTERNAL;
+
+  if (TRANSLATE_REDIRECT (ri))
+    {
+      /* We have [N]>&WORD[-] or [N]<&WORD[-] (or {V}>&WORD[-] or {V}<&WORD-).
+         and WORD, then translate the redirection into a new one and 
+	 continue. */
+      redirectee_word = redirection_expand (redirectee);
+
+      /* XXX - what to do with [N]<&$w- where w is unset or null?  ksh93
+	       closes N. */
+      if (redirectee_word == 0)
+	return (AMBIGUOUS_REDIRECT);
+      else if (redirectee_word[0] == '-' && redirectee_word[1] == '\0')
+	{
+	  sd = redirect->redirector;
+	  rd.dest = 0;
+	  new_redirect = make_redirection (sd, r_close_this, rd, 0);
+	}
+      else if (all_digits (redirectee_word))
+	{
+	  sd = redirect->redirector;
+	  if (legal_number (redirectee_word, &lfd) && (int)lfd == lfd)
+	    rd.dest = lfd;
+	  else
+	    rd.dest = -1;	/* XXX */
+	  switch (ri)
+	    {
+	    case r_duplicating_input_word:
+	      new_redirect = make_redirection (sd, r_duplicating_input, rd, 0);
+	      break;
+	    case r_duplicating_output_word:
+	      new_redirect = make_redirection (sd, r_duplicating_output, rd, 0);
+	      break;
+	    case r_move_input_word:
+	      new_redirect = make_redirection (sd, r_move_input, rd, 0);
+	      break;
+	    case r_move_output_word:
+	      new_redirect = make_redirection (sd, r_move_output, rd, 0);
+	      break;
+	    default:
+	      break;	/* shut up gcc */
+	    }
+	}
+      else if (ri == r_duplicating_output_word && (redirect->rflags & REDIR_VARASSIGN) == 0 && redirector == 1)
+	{
+	  sd = redirect->redirector;
+	  rd.filename = make_bare_word (redirectee_word);
+	  new_redirect = make_redirection (sd, r_err_and_out, rd, 0);
+	}
+      else
+	{
+	  free (redirectee_word);
+	  return (AMBIGUOUS_REDIRECT);
+	}
+
+      free (redirectee_word);
+
+      /* Set up the variables needed by the rest of the function from the
+	 new redirection. */
+      if (new_redirect->instruction == r_err_and_out)
+	{
+	  char *alloca_hack;
+
+	  /* Copy the word without allocating any memory that must be
+	     explicitly freed. */
+	  redirectee = (WORD_DESC *)alloca (sizeof (WORD_DESC));
+	  xbcopy ((char *)new_redirect->redirectee.filename,
+		 (char *)redirectee, sizeof (WORD_DESC));
+
+	  alloca_hack = (char *)
+	    alloca (1 + strlen (new_redirect->redirectee.filename->word));
+	  redirectee->word = alloca_hack;
+	  strcpy (redirectee->word, new_redirect->redirectee.filename->word);
+	}
+      else
+	/* It's guaranteed to be an integer, and shouldn't be freed. */
+	redirectee = new_redirect->redirectee.filename;
+
+      redir_fd = new_redirect->redirectee.dest;
+      redirector = new_redirect->redirector.dest;
+      ri = new_redirect->instruction;
+
+      /* Overwrite the flags element of the old redirect with the new value. */
+      redirect->flags = new_redirect->flags;
+      dispose_redirects (new_redirect);
+    }
+
+  switch (ri)
+    {
+    case r_output_direction:
+    case r_appending_to:
+    case r_input_direction:
+    case r_inputa_direction:
+    case r_err_and_out:		/* command &>filename */
+    case r_append_err_and_out:	/* command &>> filename */
+    case r_input_output:
+    case r_output_force:
+      if (posixly_correct && interactive_shell == 0)
+	{
+	  oflags = redirectee->flags;
+	  redirectee->flags |= W_NOGLOB;
+	}
+      redirectee_word = redirection_expand (redirectee);
+      if (posixly_correct && interactive_shell == 0)
+	redirectee->flags = oflags;
+
+      if (redirectee_word == 0)
+	return (AMBIGUOUS_REDIRECT);
+
+#if defined (RESTRICTED_SHELL)
+      if (restricted && (WRITE_REDIRECT (ri)))
+	{
+	  free (redirectee_word);
+	  return (RESTRICTED_REDIRECT);
+	}
+#endif /* RESTRICTED_SHELL */
+
+      fd = redir_open (redirectee_word, redirect->flags, 0666, ri);
+      if (fnp)
+	*fnp = redirectee_word;
+      else
+	free (redirectee_word);
+
+      if (fd == NOCLOBBER_REDIRECT || fd == RESTRICTED_REDIRECT)
+	return (fd);
+
+      if (fd < 0)
+	return (errno);
+
+      if (flags & RX_ACTIVE)
+	{
+	  if (redirect->rflags & REDIR_VARASSIGN)
+	    {
+	      redirector = fcntl (fd, F_DUPFD, SHELL_FD_BASE);		/* XXX try this for now */
+	      r = errno;
+	      if (redirector < 0)
+		sys_error (_("redirection error: cannot duplicate fd"));
+	      REDIRECTION_ERROR (redirector, r, fd);
+	    }
+
+	  if ((flags & RX_UNDOABLE) && (redirect->rflags & REDIR_VARASSIGN) == 0)
+	    {
+	      /* Only setup to undo it if the thing to undo is active. */
+	      if ((fd != redirector) && (fcntl (redirector, F_GETFD, 0) != -1))
+		r = add_undo_redirect (redirector, ri, -1);
+	      else
+		r = add_undo_close_redirect (redirector);
+	      REDIRECTION_ERROR (r, errno, fd);
+	    }
+
+#if defined (BUFFERED_INPUT)
+	  /* inhibit call to sync_buffered_stream() for async processes */
+	  if (redirector != 0 || (subshell_environment & SUBSHELL_ASYNC) == 0)
+	    check_bash_input (redirector);
+#endif
+
+	  /* Make sure there is no pending output before we change the state
+	     of the underlying file descriptor, since the builtins use stdio
+	     for output. */
+	  if (redirector == 1 && fileno (stdout) == redirector)
+	    {
+	      fflush (stdout);
+	      fpurge (stdout);
+	    }
+	  else if (redirector == 2 && fileno (stderr) == redirector)
+	    {
+	      fflush (stderr);
+	      fpurge (stderr);
+	    }
+
+	  if (redirect->rflags & REDIR_VARASSIGN)
+	    {
+	      if ((r = redir_varassign (redirect, redirector)) < 0)
+		{
+		  close (redirector);
+		  close (fd);
+		  return (r);	/* XXX */
+		}
+	    }
+	  else if ((fd != redirector) && (dup2 (fd, redirector) < 0))
+	    {
+	      close (fd);	/* dup2 failed? must be fd limit issue */
+	      return (errno);
+	    }
+
+#if defined (BUFFERED_INPUT)
+	  /* Do not change the buffered stream for an implicit redirection
+	     of /dev/null to fd 0 for asynchronous commands without job
+	     control (r_inputa_direction). */
+	  if (ri == r_input_direction || ri == r_input_output)
+	    duplicate_buffered_stream (fd, redirector);
+#endif /* BUFFERED_INPUT */
+
+	  /*
+	   * If we're remembering, then this is the result of a while, for
+	   * or until loop with a loop redirection, or a function/builtin
+	   * executing in the parent shell with a redirection.  In the
+	   * function/builtin case, we want to set all file descriptors > 2
+	   * to be close-on-exec to duplicate the effect of the old
+	   * for i = 3 to NOFILE close(i) loop.  In the case of the loops,
+	   * both sh and ksh leave the file descriptors open across execs.
+	   * The Posix standard mentions only the exec builtin.
+	   */
+	  if ((flags & RX_CLEXEC) && (redirector > 2))
+	    SET_CLOSE_ON_EXEC (redirector);
+	}
+
+      if (fd != redirector)
+	{
+#if defined (BUFFERED_INPUT)
+	  if (INPUT_REDIRECT (ri))
+	    close_buffered_fd (fd);
+	  else
+#endif /* !BUFFERED_INPUT */
+	    close (fd);		/* Don't close what we just opened! */
+	}
+
+      /* If we are hacking both stdout and stderr, do the stderr
+	 redirection here.  XXX - handle {var} here? */
+      if (ri == r_err_and_out || ri == r_append_err_and_out)
+	{
+	  if (flags & RX_ACTIVE)
+	    {
+	      if (flags & RX_UNDOABLE)
+		add_undo_redirect (2, ri, -1);
+	      if (dup2 (1, 2) < 0)
+		return (errno);
+	    }
+	}
+      break;
+
+    case r_reading_until:
+    case r_deblank_reading_until:
+    case r_reading_string:
+      /* REDIRECTEE is a pointer to a WORD_DESC containing the text of
+	 the new input.  Place it in a temporary file. */
+      if (redirectee)
+	{
+	  fd = here_document_to_fd (redirectee, ri);
+
+	  if (fd < 0)
+	    {
+	      heredoc_errno = errno;
+	      return (HEREDOC_REDIRECT);
+	    }
+
+	  if (redirect->rflags & REDIR_VARASSIGN)
+	    {
+	      redirector = fcntl (fd, F_DUPFD, SHELL_FD_BASE);		/* XXX try this for now */
+	      r = errno;
+	      if (redirector < 0)
+		sys_error (_("redirection error: cannot duplicate fd"));
+	      REDIRECTION_ERROR (redirector, r, fd);
+	    }
+
+	  if (flags & RX_ACTIVE)
+	    {
+	      if ((flags & RX_UNDOABLE) && (redirect->rflags & REDIR_VARASSIGN) == 0)
+	        {
+		  /* Only setup to undo it if the thing to undo is active. */
+		  if ((fd != redirector) && (fcntl (redirector, F_GETFD, 0) != -1))
+		    r = add_undo_redirect (redirector, ri, -1);
+		  else
+		    r = add_undo_close_redirect (redirector);
+		  REDIRECTION_ERROR (r, errno, fd);
+	        }
+
+#if defined (BUFFERED_INPUT)
+	      check_bash_input (redirector);
+#endif
+	      if (redirect->rflags & REDIR_VARASSIGN)
+		{
+		  if ((r = redir_varassign (redirect, redirector)) < 0)
+		    {
+		      close (redirector);
+		      close (fd);
+		      return (r);	/* XXX */
+		    }
+		}
+	      else if (fd != redirector && dup2 (fd, redirector) < 0)
+		{
+		  r = errno;
+		  close (fd);
+		  return (r);
+		}
+
+#if defined (BUFFERED_INPUT)
+	      duplicate_buffered_stream (fd, redirector);
+#endif
+
+	      if ((flags & RX_CLEXEC) && (redirector > 2))
+		SET_CLOSE_ON_EXEC (redirector);
+	    }
+
+	  if (fd != redirector)
+#if defined (BUFFERED_INPUT)
+	    close_buffered_fd (fd);
+#else
+	    close (fd);
+#endif
+	}
+      break;
+
+    case r_duplicating_input:
+    case r_duplicating_output:
+    case r_move_input:
+    case r_move_output:
+      if ((flags & RX_ACTIVE) && (redirect->rflags & REDIR_VARASSIGN))
+        {
+	  redirector = fcntl (redir_fd, F_DUPFD, SHELL_FD_BASE);		/* XXX try this for now */
+	  r = errno;
+	  if (redirector < 0)
+	    sys_error (_("redirection error: cannot duplicate fd"));
+	  REDIRECTION_ERROR (redirector, r, -1);
+        }
+
+      if ((flags & RX_ACTIVE) && (redir_fd != redirector))
+	{
+	  if ((flags & RX_UNDOABLE) && (redirect->rflags & REDIR_VARASSIGN) == 0)
+	    {
+	      /* Only setup to undo it if the thing to undo is active. */
+	      if (fcntl (redirector, F_GETFD, 0) != -1)
+		r = add_undo_redirect (redirector, ri, redir_fd);
+	      else
+		r = add_undo_close_redirect (redirector);
+	      REDIRECTION_ERROR (r, errno, -1);
+	    }
+	  if ((flags & RX_UNDOABLE) && (ri == r_move_input || ri == r_move_output))
+	    {
+	      /* r_move_input and r_move_output add an additional close()
+		 that needs to be undone */
+	      if (fcntl (redirector, F_GETFD, 0) != -1)
+		{
+		  r = add_undo_redirect (redir_fd, r_close_this, -1);
+		  REDIRECTION_ERROR (r, errno, -1);
+		}
+	    }
+#if defined (BUFFERED_INPUT)
+	  /* inhibit call to sync_buffered_stream() for async processes */
+	  if (redirector != 0 || (subshell_environment & SUBSHELL_ASYNC) == 0)
+	    check_bash_input (redirector);
+#endif
+	  if (redirect->rflags & REDIR_VARASSIGN)
+	    {
+	      if ((r = redir_varassign (redirect, redirector)) < 0)
+		{
+		  close (redirector);
+		  return (r);	/* XXX */
+		}
+	    }
+	  /* This is correct.  2>&1 means dup2 (1, 2); */
+	  else if (dup2 (redir_fd, redirector) < 0)
+	    return (errno);
+
+#if defined (BUFFERED_INPUT)
+	  if (ri == r_duplicating_input || ri == r_move_input)
+	    duplicate_buffered_stream (redir_fd, redirector);
+#endif /* BUFFERED_INPUT */
+
+	  /* First duplicate the close-on-exec state of redirectee.  dup2
+	     leaves the flag unset on the new descriptor, which means it
+	     stays open.  Only set the close-on-exec bit for file descriptors
+	     greater than 2 in any case, since 0-2 should always be open
+	     unless closed by something like `exec 2<&-'.  It should always
+	     be safe to set fds > 2 to close-on-exec if they're being used to
+	     save file descriptors < 2, since we don't need to preserve the
+	     state of the close-on-exec flag for those fds -- they should
+	     always be open. */
+	  /* if ((already_set || set_unconditionally) && (ok_to_set))
+		set_it () */
+#if 0
+	  if (((fcntl (redir_fd, F_GETFD, 0) == 1) || redir_fd < 2 || (flags & RX_CLEXEC)) &&
+	       (redirector > 2))
+#else
+	  if (((fcntl (redir_fd, F_GETFD, 0) == 1) || (redir_fd < 2 && (flags & RX_INTERNAL)) || (flags & RX_CLEXEC)) &&
+	       (redirector > 2))
+#endif
+	    SET_CLOSE_ON_EXEC (redirector);
+
+	  /* When undoing saving of non-standard file descriptors (>=3) using
+	     file descriptors >= SHELL_FD_BASE, we set the saving fd to be
+	     close-on-exec and use a flag to decide how to set close-on-exec
+	     when the fd is restored. */
+	  if ((redirect->flags & RX_INTERNAL) && (redirect->flags & RX_SAVCLEXEC) && redirector >= 3 && (redir_fd >= SHELL_FD_BASE || (redirect->flags & RX_SAVEFD)))
+	    SET_OPEN_ON_EXEC (redirector);
+	    
+	  /* dup-and-close redirection */
+	  if (ri == r_move_input || ri == r_move_output)
+	    {
+	      xtrace_fdchk (redir_fd);
+
+	      close (redir_fd);
+#if defined (COPROCESS_SUPPORT)
+	      coproc_fdchk (redir_fd);	/* XXX - loses coproc fds */
+#endif
+	    }
+	}
+      break;
+
+    case r_close_this:
+      if (flags & RX_ACTIVE)
+	{
+	  if (redirect->rflags & REDIR_VARASSIGN)
+	    {
+	      redirector = redir_varvalue (redirect);
+	      if (redirector < 0)
+		return AMBIGUOUS_REDIRECT;
+	    }
+
+	  r = 0;
+	  /* XXX - only if REDIR_VARASSIGN not set? */
+	  if (flags & RX_UNDOABLE)
+	    {
+	      if (fcntl (redirector, F_GETFD, 0) != -1)
+		r = add_undo_redirect (redirector, ri, -1);
+	      else
+		r = add_undo_close_redirect (redirector);
+	      REDIRECTION_ERROR (r, errno, redirector);
+	    }
+
+#if defined (COPROCESS_SUPPORT)
+	  coproc_fdchk (redirector);
+#endif
+	  xtrace_fdchk (redirector);
+
+#if defined (BUFFERED_INPUT)
+	  /* inhibit call to sync_buffered_stream() for async processes */
+	  if (redirector != 0 || (subshell_environment & SUBSHELL_ASYNC) == 0)
+	    check_bash_input (redirector);
+	  r = close_buffered_fd (redirector);
+#else /* !BUFFERED_INPUT */
+	  r = close (redirector);
+#endif /* !BUFFERED_INPUT */
+
+	  if (r < 0 && (flags & RX_INTERNAL) && (errno == EIO || errno == ENOSPC))
+	    REDIRECTION_ERROR (r, errno, -1);
+	}
+      break;
+
+    case r_duplicating_input_word:
+    case r_duplicating_output_word:
+    case r_move_input_word:
+    case r_move_output_word:
+      break;
+    }
+  return (0);
+}
+
+/* Remember the file descriptor associated with the slot FD,
+   on REDIRECTION_UNDO_LIST.  Note that the list will be reversed
+   before it is executed.  Any redirections that need to be undone
+   even if REDIRECTION_UNDO_LIST is discarded by the exec builtin
+   are also saved on EXEC_REDIRECTION_UNDO_LIST.  FDBASE says where to
+   start the duplicating.  If it's less than SHELL_FD_BASE, we're ok,
+   and can use SHELL_FD_BASE (-1 == don't care).  If it's >= SHELL_FD_BASE,
+   we have to make sure we don't use fdbase to save a file descriptor,
+   since we're going to use it later (e.g., make sure we don't save fd 0
+   to fd 10 if we have a redirection like 0<&10).  If the value of fdbase
+   puts the process over its fd limit, causing fcntl to fail, we try
+   again with SHELL_FD_BASE.  Return 0 on success, -1 on error. */
+static int
+add_undo_redirect (fd, ri, fdbase)
+     int fd;
+     enum r_instruction ri;
+     int fdbase;
+{
+  int new_fd, clexec_flag, savefd_flag;
+  REDIRECT *new_redirect, *closer, *dummy_redirect;
+  REDIRECTEE sd;
+
+  savefd_flag = 0;
+  new_fd = fcntl (fd, F_DUPFD, (fdbase < SHELL_FD_BASE) ? SHELL_FD_BASE : fdbase+1);
+  if (new_fd < 0)
+    new_fd = fcntl (fd, F_DUPFD, SHELL_FD_BASE);
+  if (new_fd < 0)
+    {
+      new_fd = fcntl (fd, F_DUPFD, 0);
+      savefd_flag = 1;
+    }
+
+  if (new_fd < 0)
+    {
+      sys_error (_("redirection error: cannot duplicate fd"));
+      return (-1);
+    }
+
+  clexec_flag = fcntl (fd, F_GETFD, 0);
+
+  sd.dest = new_fd;
+  rd.dest = 0;
+  closer = make_redirection (sd, r_close_this, rd, 0);
+  closer->flags |= RX_INTERNAL;
+  dummy_redirect = copy_redirects (closer);
+
+  sd.dest = fd;
+  rd.dest = new_fd;
+  if (fd == 0)
+    new_redirect = make_redirection (sd, r_duplicating_input, rd, 0);
+  else
+    new_redirect = make_redirection (sd, r_duplicating_output, rd, 0);
+  new_redirect->flags |= RX_INTERNAL;
+  if (savefd_flag)
+    new_redirect->flags |= RX_SAVEFD;
+  if (clexec_flag == 0 && fd >= 3 && (new_fd >= SHELL_FD_BASE || savefd_flag))
+    new_redirect->flags |= RX_SAVCLEXEC;
+  new_redirect->next = closer;
+
+  closer->next = redirection_undo_list;
+  redirection_undo_list = new_redirect;
+
+  /* Save redirections that need to be undone even if the undo list
+     is thrown away by the `exec' builtin. */
+  add_exec_redirect (dummy_redirect);
+
+  /* experimental:  if we're saving a redirection to undo for a file descriptor
+     above SHELL_FD_BASE, add a redirection to be undone if the exec builtin
+     causes redirections to be discarded.  There needs to be a difference
+     between fds that are used to save other fds and then are the target of
+     user redirections and fds that are just the target of user redirections.
+     We use the close-on-exec flag to tell the difference; fds > SHELL_FD_BASE
+     that have the close-on-exec flag set are assumed to be fds used internally
+     to save others. */
+  if (fd >= SHELL_FD_BASE && ri != r_close_this && clexec_flag)
+    {
+      sd.dest = fd;
+      rd.dest = new_fd;
+      new_redirect = make_redirection (sd, r_duplicating_output, rd, 0);
+      new_redirect->flags |= RX_INTERNAL;
+
+      add_exec_redirect (new_redirect);
+    }
+
+  /* File descriptors used only for saving others should always be
+     marked close-on-exec.  Unfortunately, we have to preserve the
+     close-on-exec state of the file descriptor we are saving, since
+     fcntl (F_DUPFD) sets the new file descriptor to remain open
+     across execs.  If, however, the file descriptor whose state we
+     are saving is <= 2, we can just set the close-on-exec flag,
+     because file descriptors 0-2 should always be open-on-exec,
+     and the restore above in do_redirection() will take care of it. */
+  if (clexec_flag || fd < 3)
+    SET_CLOSE_ON_EXEC (new_fd);
+  else if (redirection_undo_list->flags & RX_SAVCLEXEC)
+    SET_CLOSE_ON_EXEC (new_fd);
+
+  return (0);
+}
+
+/* Set up to close FD when we are finished with the current command
+   and its redirections.  Return 0 on success, -1 on error. */
+static int
+add_undo_close_redirect (fd)
+     int fd;
+{
+  REDIRECT *closer;
+  REDIRECTEE sd;
+
+  sd.dest = fd;
+  rd.dest = 0;
+  closer = make_redirection (sd, r_close_this, rd, 0);
+  closer->flags |= RX_INTERNAL;
+  closer->next = redirection_undo_list;
+  redirection_undo_list = closer;
+
+  return 0;
+}
+
+static void
+add_exec_redirect (dummy_redirect)
+     REDIRECT *dummy_redirect;
+{
+  dummy_redirect->next = exec_redirection_undo_list;
+  exec_redirection_undo_list = dummy_redirect;
+}
+
+/* Return 1 if the redirection specified by RI and REDIRECTOR alters the
+   standard input. */
+static int
+stdin_redirection (ri, redirector)
+     enum r_instruction ri;
+     int redirector;
+{
+  switch (ri)
+    {
+    case r_input_direction:
+    case r_inputa_direction:
+    case r_input_output:
+    case r_reading_until:
+    case r_deblank_reading_until:
+    case r_reading_string:
+      return (1);
+    case r_duplicating_input:
+    case r_duplicating_input_word:
+    case r_close_this:
+      return (redirector == 0);
+    case r_output_direction:
+    case r_appending_to:
+    case r_duplicating_output:
+    case r_err_and_out:
+    case r_append_err_and_out:
+    case r_output_force:
+    case r_duplicating_output_word:
+    case r_move_input:
+    case r_move_output:
+    case r_move_input_word:
+    case r_move_output_word:
+      return (0);
+    }
+  return (0);
+}
+
+/* Return non-zero if any of the redirections in REDIRS alter the standard
+   input. */
+int
+stdin_redirects (redirs)
+     REDIRECT *redirs;
+{
+  REDIRECT *rp;
+  int n;
+
+  for (n = 0, rp = redirs; rp; rp = rp->next)
+    if ((rp->rflags & REDIR_VARASSIGN) == 0)
+      n += stdin_redirection (rp->instruction, rp->redirector.dest);
+  return n;
+}
+/* bind_var_to_int handles array references */
+static int
+redir_varassign (redir, fd)
+     REDIRECT *redir;
+     int fd;
+{
+  WORD_DESC *w;
+  SHELL_VAR *v;
+
+  w = redir->redirector.filename;
+  v = bind_var_to_int (w->word, fd);
+  if (v == 0 || readonly_p (v) || noassign_p (v))
+    return BADVAR_REDIRECT;
+
+  stupidly_hack_special_variables (w->word);
+  return 0;
+}
+
+/* Handles {array[ind]} for redirection words */
+static int
+redir_varvalue (redir)
+     REDIRECT *redir;
+{
+  SHELL_VAR *v;
+  char *val, *w;
+  intmax_t vmax;
+  int i;
+#if defined (ARRAY_VARS)
+  char *sub;
+  int len, vr;
+#endif
+
+  w = redir->redirector.filename->word;		/* shorthand */
+  /* XXX - handle set -u here? */
+#if defined (ARRAY_VARS)
+  if (vr = valid_array_reference (w, 0))
+    {
+      v = array_variable_part (w, 0, &sub, &len);
+    }
+  else
+#endif
+    {
+      v = find_variable (w);
+#if defined (ARRAY_VARS)
+      if (v == 0)
+	{
+	  v = find_variable_last_nameref (w, 0);
+	  if (v && nameref_p (v))
+	    {
+	      w = nameref_cell (v);
+	      if (vr = valid_array_reference (w, 0))
+		v = array_variable_part (w, 0, &sub, &len);
+	      else
+	        v = find_variable (w);
+	    }
+	}
+#endif
+    }
+	
+  if (v == 0 || invisible_p (v))
+    return -1;
+
+#if defined (ARRAY_VARS)
+  /* get_variable_value handles references to array variables without
+     subscripts */
+  if (vr && (array_p (v) || assoc_p (v)))
+    val = get_array_value (w, 0, (int *)NULL, (arrayind_t *)0);
+  else
+#endif
+  val = get_variable_value (v);
+  if (val == 0 || *val == 0)
+    return -1;
+
+  if (legal_number (val, &vmax) < 0)
+    return -1;
+
+  i = vmax;	/* integer truncation */
+  return i;
+}
diff --git a/redir.h b/redir.h
new file mode 100644
index 0000000..64a3d26
--- /dev/null
+++ b/redir.h
@@ -0,0 +1,40 @@
+/* redir.h - functions from redir.c. */
+
+/* Copyright (C) 1997, 2001, 2005, 2008, 2009-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_REDIR_H_)
+#define _REDIR_H_
+
+#include "stdc.h"
+
+/* Values for flags argument to do_redirections */
+#define RX_ACTIVE	0x01	/* do it; don't just go through the motions */
+#define RX_UNDOABLE	0x02	/* make a list to undo these redirections */
+#define RX_CLEXEC	0x04	/* set close-on-exec for opened fds > 2 */
+#define RX_INTERNAL	0x08
+#define RX_USER		0x10
+#define RX_SAVCLEXEC	0x20	/* set close-on-exec off in restored fd even though saved on has it on */
+#define RX_SAVEFD	0x40	/* fd used to save another even if < SHELL_FD_BASE */
+
+extern void redirection_error PARAMS((REDIRECT *, int, char *));
+extern int do_redirections PARAMS((REDIRECT *, int));
+extern char *redirection_expand PARAMS((WORD_DESC *));
+extern int stdin_redirects PARAMS((REDIRECT *));
+
+#endif /* _REDIR_H_ */
diff --git a/shell.c b/shell.c
new file mode 100644
index 0000000..ce8087f
--- /dev/null
+++ b/shell.c
@@ -0,0 +1,2103 @@
+/* shell.c -- GNU's idea of the POSIX shell specification. */
+
+/* Copyright (C) 1987-2019 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+  Birthdate:
+  Sunday, January 10th, 1988.
+  Initial author: Brian Fox
+*/
+#define INSTALL_DEBUG_MODE
+
+#include "config.h"
+
+#include "bashtypes.h"
+#if !defined (_MINIX) && defined (HAVE_SYS_FILE_H)
+#  include <sys/file.h>
+#endif
+#include "posixstat.h"
+#include "posixtime.h"
+#include "bashansi.h"
+#include <stdio.h>
+#include <signal.h>
+#include <errno.h>
+#include "filecntl.h"
+#if defined (HAVE_PWD_H)
+#  include <pwd.h>
+#endif
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "bashintl.h"
+
+#define NEED_SH_SETLINEBUF_DECL		/* used in externs.h */
+
+#include "shell.h"
+#include "parser.h"
+#include "flags.h"
+#include "trap.h"
+#include "mailcheck.h"
+#include "builtins.h"
+#include "builtins/common.h"
+
+#if defined (JOB_CONTROL)
+#include "jobs.h"
+#else
+extern int running_in_background;
+extern int initialize_job_control PARAMS((int));
+extern int get_tty_state PARAMS((void));
+#endif /* JOB_CONTROL */
+
+#include "input.h"
+#include "execute_cmd.h"
+#include "findcmd.h"
+
+#if defined (USING_BASH_MALLOC) && defined (DEBUG) && !defined (DISABLE_MALLOC_WRAPPERS)
+#  include <malloc/shmalloc.h>
+#endif
+
+#if defined (HISTORY)
+#  include "bashhist.h"
+#  include <readline/history.h>
+#endif
+
+#if defined (READLINE)
+#  include <readline/readline.h>
+#  include "bashline.h"
+#endif
+
+#include <tilde/tilde.h>
+#include <glob/strmatch.h>
+
+#if defined (__OPENNT)
+#  include <opennt/opennt.h>
+#endif
+
+#if !defined (HAVE_GETPW_DECLS)
+extern struct passwd *getpwuid ();
+#endif /* !HAVE_GETPW_DECLS */
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+#if defined (NO_MAIN_ENV_ARG)
+extern char **environ;	/* used if no third argument to main() */
+#endif
+
+extern int gnu_error_format;
+
+/* Non-zero means that this shell has already been run; i.e. you should
+   call shell_reinitialize () if you need to start afresh. */
+int shell_initialized = 0;
+int bash_argv_initialized = 0;
+
+COMMAND *global_command = (COMMAND *)NULL;
+
+/* Information about the current user. */
+struct user_info current_user =
+{
+  (uid_t)-1, (uid_t)-1, (gid_t)-1, (gid_t)-1,
+  (char *)NULL, (char *)NULL, (char *)NULL
+};
+
+/* The current host's name. */
+char *current_host_name = (char *)NULL;
+
+/* Non-zero means that this shell is a login shell.
+   Specifically:
+   0 = not login shell.
+   1 = login shell from getty (or equivalent fake out)
+  -1 = login shell from "--login" (or -l) flag.
+  -2 = both from getty, and from flag.
+ */
+int login_shell = 0;
+
+/* Non-zero means that at this moment, the shell is interactive.  In
+   general, this means that the shell is at this moment reading input
+   from the keyboard. */
+int interactive = 0;
+
+/* Non-zero means that the shell was started as an interactive shell. */
+int interactive_shell = 0;
+
+/* Non-zero means to send a SIGHUP to all jobs when an interactive login
+   shell exits. */
+int hup_on_exit = 0;
+
+/* Non-zero means to list status of running and stopped jobs at shell exit */
+int check_jobs_at_exit = 0;
+
+/* Non-zero means to change to a directory name supplied as a command name */
+int autocd = 0;
+
+/* Tells what state the shell was in when it started:
+	0 = non-interactive shell script
+	1 = interactive
+	2 = -c command
+	3 = wordexp evaluation
+   This is a superset of the information provided by interactive_shell.
+*/
+int startup_state = 0;
+int reading_shell_script = 0;
+
+/* Special debugging helper. */
+int debugging_login_shell = 0;
+
+/* The environment that the shell passes to other commands. */
+char **shell_environment;
+
+/* Non-zero when we are executing a top-level command. */
+int executing = 0;
+
+/* The number of commands executed so far. */
+int current_command_number = 1;
+
+/* Non-zero is the recursion depth for commands. */
+int indirection_level = 0;
+
+/* The name of this shell, as taken from argv[0]. */
+char *shell_name = (char *)NULL;
+
+/* time in seconds when the shell was started */
+time_t shell_start_time;
+struct timeval shellstart;
+
+/* Are we running in an emacs shell window? */
+int running_under_emacs;
+
+/* Do we have /dev/fd? */
+#ifdef HAVE_DEV_FD
+int have_devfd = HAVE_DEV_FD;
+#else
+int have_devfd = 0;
+#endif
+
+/* The name of the .(shell)rc file. */
+static char *bashrc_file = DEFAULT_BASHRC;
+
+/* Non-zero means to act more like the Bourne shell on startup. */
+static int act_like_sh;
+
+/* Non-zero if this shell is being run by `su'. */
+static int su_shell;
+
+/* Non-zero if we have already expanded and sourced $ENV. */
+static int sourced_env;
+
+/* Is this shell running setuid? */
+static int running_setuid;
+
+/* Values for the long-winded argument names. */
+static int debugging;			/* Do debugging things. */
+static int no_rc;			/* Don't execute ~/.bashrc */
+static int no_profile;			/* Don't execute .profile */
+static int do_version;			/* Display interesting version info. */
+static int make_login_shell;		/* Make this shell be a `-bash' shell. */
+static int want_initial_help;		/* --help option */
+
+int debugging_mode = 0;		/* In debugging mode with --debugger */
+#if defined (READLINE)
+int no_line_editing = 0;	/* non-zero -> don't do fancy line editing. */
+#else
+int no_line_editing = 1;	/* can't have line editing without readline */
+#endif
+int dump_translatable_strings;	/* Dump strings in $"...", don't execute. */
+int dump_po_strings;		/* Dump strings in $"..." in po format */
+int wordexp_only = 0;		/* Do word expansion only */
+int protected_mode = 0;		/* No command substitution with --wordexp */
+
+int pretty_print_mode = 0;	/* pretty-print a shell script */
+
+#if defined (STRICT_POSIX)
+int posixly_correct = 1;	/* Non-zero means posix.2 superset. */
+#else
+int posixly_correct = 0;	/* Non-zero means posix.2 superset. */
+#endif
+
+/* Some long-winded argument names.  These are obviously new. */
+#define Int 1
+#define Charp 2
+static const struct {
+  const char *name;
+  int type;
+  int *int_value;
+  char **char_value;
+} long_args[] = {
+  { "debug", Int, &debugging, (char **)0x0 },
+#if defined (DEBUGGER)
+  { "debugger", Int, &debugging_mode, (char **)0x0 },
+#endif
+  { "dump-po-strings", Int, &dump_po_strings, (char **)0x0 },
+  { "dump-strings", Int, &dump_translatable_strings, (char **)0x0 },
+  { "help", Int, &want_initial_help, (char **)0x0 },
+  { "init-file", Charp, (int *)0x0, &bashrc_file },
+  { "login", Int, &make_login_shell, (char **)0x0 },
+  { "noediting", Int, &no_line_editing, (char **)0x0 },
+  { "noprofile", Int, &no_profile, (char **)0x0 },
+  { "norc", Int, &no_rc, (char **)0x0 },
+  { "posix", Int, &posixly_correct, (char **)0x0 },
+  { "pretty-print", Int, &pretty_print_mode, (char **)0x0 },
+#if defined (WORDEXP_OPTION)
+  { "protected", Int, &protected_mode, (char **)0x0 },
+#endif
+  { "rcfile", Charp, (int *)0x0, &bashrc_file },
+#if defined (RESTRICTED_SHELL)
+  { "restricted", Int, &restricted, (char **)0x0 },
+#endif
+  { "verbose", Int, &verbose_flag, (char **)0x0 },
+  { "version", Int, &do_version, (char **)0x0 },
+#if defined (WORDEXP_OPTION)
+  { "wordexp", Int, &wordexp_only, (char **)0x0 },
+#endif
+  { (char *)0x0, Int, (int *)0x0, (char **)0x0 }
+};
+
+/* These are extern so execute_simple_command can set them, and then
+   longjmp back to main to execute a shell script, instead of calling
+   main () again and resulting in indefinite, possibly fatal, stack
+   growth. */
+procenv_t subshell_top_level;
+int subshell_argc;
+char **subshell_argv;
+char **subshell_envp;
+
+char *exec_argv0;
+
+#if defined (BUFFERED_INPUT)
+/* The file descriptor from which the shell is reading input. */
+int default_buffered_input = -1;
+#endif
+
+/* The following two variables are not static so they can show up in $-. */
+int read_from_stdin;		/* -s flag supplied */
+int want_pending_command;	/* -c flag supplied */
+
+/* This variable is not static so it can be bound to $BASH_EXECUTION_STRING */
+char *command_execution_string;	/* argument to -c option */
+char *shell_script_filename; 	/* shell script */
+
+int malloc_trace_at_exit = 0;
+
+static int shell_reinitialized = 0;
+
+static FILE *default_input;
+
+static STRING_INT_ALIST *shopt_alist;
+static int shopt_ind = 0, shopt_len = 0;
+
+static int parse_long_options PARAMS((char **, int, int));
+static int parse_shell_options PARAMS((char **, int, int));
+static int bind_args PARAMS((char **, int, int, int));
+
+static void start_debugger PARAMS((void));
+
+static void add_shopt_to_alist PARAMS((char *, int));
+static void run_shopt_alist PARAMS((void));
+
+static void execute_env_file PARAMS((char *));
+static void run_startup_files PARAMS((void));
+static int open_shell_script PARAMS((char *));
+static void set_bash_input PARAMS((void));
+static int run_one_command PARAMS((char *));
+#if defined (WORDEXP_OPTION)
+static int run_wordexp PARAMS((char *));
+#endif
+
+static int uidget PARAMS((void));
+
+static void set_option_defaults PARAMS((void));
+static void reset_option_defaults PARAMS((void));
+
+static void init_interactive PARAMS((void));
+static void init_noninteractive PARAMS((void));
+static void init_interactive_script PARAMS((void));
+
+static void set_shell_name PARAMS((char *));
+static void shell_initialize PARAMS((void));
+static void shell_reinitialize PARAMS((void));
+
+static void show_shell_usage PARAMS((FILE *, int));
+
+#ifdef __CYGWIN__
+static void
+_cygwin32_check_tmp ()
+{
+  struct stat sb;
+
+  if (stat ("/tmp", &sb) < 0)
+    internal_warning (_("could not find /tmp, please create!"));
+  else
+    {
+      if (S_ISDIR (sb.st_mode) == 0)
+	internal_warning (_("/tmp must be a valid directory name"));
+    }
+}
+#endif /* __CYGWIN__ */
+
+#if defined (NO_MAIN_ENV_ARG)
+/* systems without third argument to main() */
+int
+main (argc, argv)
+     int argc;
+     char **argv;
+#else /* !NO_MAIN_ENV_ARG */
+int
+main (argc, argv, env)
+     int argc;
+     char **argv, **env;
+#endif /* !NO_MAIN_ENV_ARG */
+{
+  register int i;
+  int code, old_errexit_flag;
+#if defined (RESTRICTED_SHELL)
+  int saverst;
+#endif
+  volatile int locally_skip_execution;
+  volatile int arg_index, top_level_arg_index;
+#ifdef __OPENNT
+  char **env;
+
+  env = environ;
+#endif /* __OPENNT */
+
+  USE_VAR(argc);
+  USE_VAR(argv);
+  USE_VAR(env);
+  USE_VAR(code);
+  USE_VAR(old_errexit_flag);
+#if defined (RESTRICTED_SHELL)
+  USE_VAR(saverst);
+#endif
+
+  /* Catch early SIGINTs. */
+  code = setjmp_nosigs (top_level);
+  if (code)
+    exit (2);
+
+  xtrace_init ();
+
+#if defined (USING_BASH_MALLOC) && defined (DEBUG) && !defined (DISABLE_MALLOC_WRAPPERS)
+  malloc_set_register (1);	/* XXX - change to 1 for malloc debugging */
+#endif
+
+  check_dev_tty ();
+
+#ifdef __CYGWIN__
+  _cygwin32_check_tmp ();
+#endif /* __CYGWIN__ */
+
+  /* Wait forever if we are debugging a login shell. */
+  while (debugging_login_shell) sleep (3);
+
+  set_default_locale ();
+
+  running_setuid = uidget ();
+
+  if (getenv ("POSIXLY_CORRECT") || getenv ("POSIX_PEDANTIC"))
+    posixly_correct = 1;
+
+#if defined (USE_GNU_MALLOC_LIBRARY)
+  mcheck (programming_error, (void (*) ())0);
+#endif /* USE_GNU_MALLOC_LIBRARY */
+
+  if (setjmp_sigs (subshell_top_level))
+    {
+      argc = subshell_argc;
+      argv = subshell_argv;
+      env = subshell_envp;
+      sourced_env = 0;
+    }
+
+  shell_reinitialized = 0;
+
+  /* Initialize `local' variables for all `invocations' of main (). */
+  arg_index = 1;
+  if (arg_index > argc)
+    arg_index = argc;
+  command_execution_string = shell_script_filename = (char *)NULL;
+  want_pending_command = locally_skip_execution = read_from_stdin = 0;
+  default_input = stdin;
+#if defined (BUFFERED_INPUT)
+  default_buffered_input = -1;
+#endif
+
+  /* Fix for the `infinite process creation' bug when running shell scripts
+     from startup files on System V. */
+  login_shell = make_login_shell = 0;
+
+  /* If this shell has already been run, then reinitialize it to a
+     vanilla state. */
+  if (shell_initialized || shell_name)
+    {
+      /* Make sure that we do not infinitely recurse as a login shell. */
+      if (*shell_name == '-')
+	shell_name++;
+
+      shell_reinitialize ();
+      if (setjmp_nosigs (top_level))
+	exit (2);
+    }
+
+  shell_environment = env;
+  set_shell_name (argv[0]);
+
+  gettimeofday (&shellstart, 0);
+  shell_start_time = shellstart.tv_sec;
+
+  /* Parse argument flags from the input line. */
+
+  /* Find full word arguments first. */
+  arg_index = parse_long_options (argv, arg_index, argc);
+  
+  if (want_initial_help)
+    {
+      show_shell_usage (stdout, 1);
+      exit (EXECUTION_SUCCESS);
+    }
+
+  if (do_version)
+    {
+      show_shell_version (1);
+      exit (EXECUTION_SUCCESS);
+    }
+
+  echo_input_at_read = verbose_flag;	/* --verbose given */
+
+  /* All done with full word options; do standard shell option parsing.*/
+  this_command_name = shell_name;	/* for error reporting */
+  arg_index = parse_shell_options (argv, arg_index, argc);
+
+  /* If user supplied the "--login" (or -l) flag, then set and invert
+     LOGIN_SHELL. */
+  if (make_login_shell)
+    {
+      login_shell++;
+      login_shell = -login_shell;
+    }
+
+  set_login_shell ("login_shell", login_shell != 0);
+
+  if (dump_po_strings)
+    dump_translatable_strings = 1;
+
+  if (dump_translatable_strings)
+    read_but_dont_execute = 1;
+
+  if (running_setuid && privileged_mode == 0)
+    disable_priv_mode ();
+
+  /* Need to get the argument to a -c option processed in the
+     above loop.  The next arg is a command to execute, and the
+     following args are $0...$n respectively. */
+  if (want_pending_command)
+    {
+      command_execution_string = argv[arg_index];
+      if (command_execution_string == 0)
+	{
+	  report_error (_("%s: option requires an argument"), "-c");
+	  exit (EX_BADUSAGE);
+	}
+      arg_index++;
+    }
+  this_command_name = (char *)NULL;
+
+  /* First, let the outside world know about our interactive status.
+     A shell is interactive if the `-i' flag was given, or if all of
+     the following conditions are met:
+	no -c command
+	no arguments remaining or the -s flag given
+	standard input is a terminal
+	standard error is a terminal
+     Refer to Posix.2, the description of the `sh' utility. */
+
+  if (forced_interactive ||		/* -i flag */
+      (!command_execution_string &&	/* No -c command and ... */
+       wordexp_only == 0 &&		/* No --wordexp and ... */
+       ((arg_index == argc) ||		/*   no remaining args or... */
+	read_from_stdin) &&		/*   -s flag with args, and */
+       isatty (fileno (stdin)) &&	/* Input is a terminal and */
+       isatty (fileno (stderr))))	/* error output is a terminal. */
+    init_interactive ();
+  else
+    init_noninteractive ();
+
+  /*
+   * Some systems have the bad habit of starting login shells with lots of open
+   * file descriptors.  For instance, most systems that have picked up the
+   * pre-4.0 Sun YP code leave a file descriptor open each time you call one
+   * of the getpw* functions, and it's set to be open across execs.  That
+   * means one for login, one for xterm, one for shelltool, etc.  There are
+   * also systems that open persistent FDs to other agents or files as part
+   * of process startup; these need to be set to be close-on-exec.
+   */
+  if (login_shell && interactive_shell)
+    {
+      for (i = 3; i < 20; i++)
+	SET_CLOSE_ON_EXEC (i);
+    }
+
+  /* If we're in a strict Posix.2 mode, turn on interactive comments,
+     alias expansion in non-interactive shells, and other Posix.2 things. */
+  if (posixly_correct)
+    {
+      bind_variable ("POSIXLY_CORRECT", "y", 0);
+      sv_strict_posix ("POSIXLY_CORRECT");
+    }
+
+  /* Now we run the shopt_alist and process the options. */
+  if (shopt_alist)
+    run_shopt_alist ();
+
+  /* From here on in, the shell must be a normal functioning shell.
+     Variables from the environment are expected to be set, etc. */
+  shell_initialize ();
+
+  set_default_lang ();
+  set_default_locale_vars ();
+
+  /*
+   * M-x term -> TERM=eterm-color INSIDE_EMACS='251,term:0.96' (eterm)
+   * M-x shell -> TERM='dumb' INSIDE_EMACS='25.1,comint' (no line editing)
+   *
+   * Older versions of Emacs may set EMACS to 't' or to something like
+   * '22.1 (term:0.96)' instead of (or in addition to) setting INSIDE_EMACS.
+   * They may set TERM to 'eterm' instead of 'eterm-color'.  They may have
+   * a now-obsolete command that sets neither EMACS nor INSIDE_EMACS:
+   * M-x terminal -> TERM='emacs-em7955' (line editing)
+   */
+  if (interactive_shell)
+    {
+      char *term, *emacs, *inside_emacs;
+      int emacs_term, in_emacs;
+
+      term = get_string_value ("TERM");
+      emacs = get_string_value ("EMACS");
+      inside_emacs = get_string_value ("INSIDE_EMACS");
+
+      if (inside_emacs)
+	{
+	  emacs_term = strstr (inside_emacs, ",term:") != 0;
+	  in_emacs = 1;
+	}
+      else if (emacs)
+	{
+	  /* Infer whether we are in an older Emacs. */
+	  emacs_term = strstr (emacs, " (term:") != 0;
+	  in_emacs = emacs_term || STREQ (emacs, "t");
+	}
+      else
+	in_emacs = emacs_term = 0;
+
+      /* Not sure any emacs terminal emulator sets TERM=emacs any more */
+      no_line_editing |= STREQ (term, "emacs");
+      no_line_editing |= in_emacs && STREQ (term, "dumb");
+
+      /* running_under_emacs == 2 for `eterm' */
+      running_under_emacs = in_emacs || STREQN (term, "emacs", 5);
+      running_under_emacs += emacs_term && STREQN (term, "eterm", 5);
+
+      if (running_under_emacs)
+	gnu_error_format = 1;
+    }
+
+  top_level_arg_index = arg_index;
+  old_errexit_flag = exit_immediately_on_error;
+
+  /* Give this shell a place to longjmp to before executing the
+     startup files.  This allows users to press C-c to abort the
+     lengthy startup. */
+  code = setjmp_sigs (top_level);
+  if (code)
+    {
+      if (code == EXITPROG || code == ERREXIT)
+	exit_shell (last_command_exit_value);
+      else
+	{
+#if defined (JOB_CONTROL)
+	  /* Reset job control, since run_startup_files turned it off. */
+	  set_job_control (interactive_shell);
+#endif
+	  /* Reset value of `set -e', since it's turned off before running
+	     the startup files. */
+	  exit_immediately_on_error += old_errexit_flag;
+	  locally_skip_execution++;
+	}
+    }
+
+  arg_index = top_level_arg_index;
+
+  /* Execute the start-up scripts. */
+
+  if (interactive_shell == 0)
+    {
+      unbind_variable ("PS1");
+      unbind_variable ("PS2");
+      interactive = 0;
+#if 0
+      /* This has already been done by init_noninteractive */
+      expand_aliases = posixly_correct;
+#endif
+    }
+  else
+    {
+      change_flag ('i', FLAG_ON);
+      interactive = 1;
+    }
+
+#if defined (RESTRICTED_SHELL)
+  /* Set restricted_shell based on whether the basename of $0 indicates that
+     the shell should be restricted or if the `-r' option was supplied at
+     startup. */
+  restricted_shell = shell_is_restricted (shell_name);
+
+  /* If the `-r' option is supplied at invocation, make sure that the shell
+     is not in restricted mode when running the startup files. */
+  saverst = restricted;
+  restricted = 0;
+#endif
+
+  /* Set positional parameters before running startup files. top_level_arg_index
+     holds the index of the current argument before setting the positional
+     parameters, so any changes performed in the startup files won't affect
+     later option processing. */
+  if (wordexp_only)
+    ;			/* nothing yet */
+  else if (command_execution_string)
+    arg_index = bind_args (argv, arg_index, argc, 0);	/* $0 ... $n */
+  else if (arg_index != argc && read_from_stdin == 0)
+    {
+      shell_script_filename = argv[arg_index++];
+      arg_index = bind_args (argv, arg_index, argc, 1);	/* $1 ... $n */
+    }
+  else
+    arg_index = bind_args (argv, arg_index, argc, 1);	/* $1 ... $n */
+
+  /* The startup files are run with `set -e' temporarily disabled. */
+  if (locally_skip_execution == 0 && running_setuid == 0)
+    {
+      old_errexit_flag = exit_immediately_on_error;
+      exit_immediately_on_error = 0;
+
+      run_startup_files ();
+      exit_immediately_on_error += old_errexit_flag;
+    }
+
+  /* If we are invoked as `sh', turn on Posix mode. */
+  if (act_like_sh)
+    {
+      bind_variable ("POSIXLY_CORRECT", "y", 0);
+      sv_strict_posix ("POSIXLY_CORRECT");
+    }
+
+#if defined (RESTRICTED_SHELL)
+  /* Turn on the restrictions after executing the startup files.  This
+     means that `bash -r' or `set -r' invoked from a startup file will
+     turn on the restrictions after the startup files are executed. */
+  restricted = saverst || restricted;
+  if (shell_reinitialized == 0)
+    maybe_make_restricted (shell_name);
+#endif /* RESTRICTED_SHELL */
+
+#if defined (WORDEXP_OPTION)
+  if (wordexp_only)
+    {
+      startup_state = 3;
+      last_command_exit_value = run_wordexp (argv[top_level_arg_index]);
+      exit_shell (last_command_exit_value);
+    }
+#endif
+
+  cmd_init ();		/* initialize the command object caches */
+  uwp_init ();
+
+  if (command_execution_string)
+    {
+      startup_state = 2;
+
+      if (debugging_mode)
+	start_debugger ();
+
+#if defined (ONESHOT)
+      executing = 1;
+      run_one_command (command_execution_string);
+      exit_shell (last_command_exit_value);
+#else /* ONESHOT */
+      with_input_from_string (command_execution_string, "-c");
+      goto read_and_execute;
+#endif /* !ONESHOT */
+    }
+
+  /* Get possible input filename and set up default_buffered_input or
+     default_input as appropriate. */
+  if (shell_script_filename)
+    open_shell_script (shell_script_filename);
+  else if (interactive == 0)
+    {
+      /* In this mode, bash is reading a script from stdin, which is a
+	 pipe or redirected file. */
+#if defined (BUFFERED_INPUT)
+      default_buffered_input = fileno (stdin);	/* == 0 */
+#else
+      setbuf (default_input, (char *)NULL);
+#endif /* !BUFFERED_INPUT */
+      read_from_stdin = 1;
+    }
+  else if (top_level_arg_index == argc)		/* arg index before startup files */
+    /* "If there are no operands and the -c option is not specified, the -s
+       option shall be assumed." */
+    read_from_stdin = 1;
+
+  set_bash_input ();
+
+  if (debugging_mode && locally_skip_execution == 0 && running_setuid == 0 && (reading_shell_script || interactive_shell == 0))
+    start_debugger ();
+
+  /* Do the things that should be done only for interactive shells. */
+  if (interactive_shell)
+    {
+      /* Set up for checking for presence of mail. */
+      reset_mail_timer ();
+      init_mail_dates ();
+
+#if defined (HISTORY)
+      /* Initialize the interactive history stuff. */
+      bash_initialize_history ();
+      /* Don't load the history from the history file if we've already
+	 saved some lines in this session (e.g., by putting `history -s xx'
+	 into one of the startup files). */
+      if (shell_initialized == 0 && history_lines_this_session == 0)
+	load_history ();
+#endif /* HISTORY */
+
+      /* Initialize terminal state for interactive shells after the
+	 .bash_profile and .bashrc are interpreted. */
+      get_tty_state ();
+    }
+
+#if !defined (ONESHOT)
+ read_and_execute:
+#endif /* !ONESHOT */
+
+  shell_initialized = 1;
+
+  if (pretty_print_mode && interactive_shell)
+    {
+      internal_warning (_("pretty-printing mode ignored in interactive shells"));
+      pretty_print_mode = 0;
+    }
+  if (pretty_print_mode)
+    exit_shell (pretty_print_loop ());
+
+  /* Read commands until exit condition. */
+  reader_loop ();
+  exit_shell (last_command_exit_value);
+}
+
+static int
+parse_long_options (argv, arg_start, arg_end)
+     char **argv;
+     int arg_start, arg_end;
+{
+  int arg_index, longarg, i;
+  char *arg_string;
+
+  arg_index = arg_start;
+  while ((arg_index != arg_end) && (arg_string = argv[arg_index]) &&
+	 (*arg_string == '-'))
+    {
+      longarg = 0;
+
+      /* Make --login equivalent to -login. */
+      if (arg_string[1] == '-' && arg_string[2])
+	{
+	  longarg = 1;
+	  arg_string++;
+	}
+
+      for (i = 0; long_args[i].name; i++)
+	{
+	  if (STREQ (arg_string + 1, long_args[i].name))
+	    {
+	      if (long_args[i].type == Int)
+		*long_args[i].int_value = 1;
+	      else if (argv[++arg_index] == 0)
+		{
+		  report_error (_("%s: option requires an argument"), long_args[i].name);
+		  exit (EX_BADUSAGE);
+		}
+	      else
+		*long_args[i].char_value = argv[arg_index];
+
+	      break;
+	    }
+	}
+      if (long_args[i].name == 0)
+	{
+	  if (longarg)
+	    {
+	      report_error (_("%s: invalid option"), argv[arg_index]);
+	      show_shell_usage (stderr, 0);
+	      exit (EX_BADUSAGE);
+	    }
+	  break;		/* No such argument.  Maybe flag arg. */
+	}
+
+      arg_index++;
+    }
+
+  return (arg_index);
+}
+
+static int
+parse_shell_options (argv, arg_start, arg_end)
+     char **argv;
+     int arg_start, arg_end;
+{
+  int arg_index;
+  int arg_character, on_or_off, next_arg, i;
+  char *o_option, *arg_string;
+
+  arg_index = arg_start;
+  while (arg_index != arg_end && (arg_string = argv[arg_index]) &&
+	 (*arg_string == '-' || *arg_string == '+'))
+    {
+      /* There are flag arguments, so parse them. */
+      next_arg = arg_index + 1;
+
+      /* A single `-' signals the end of options.  From the 4.3 BSD sh.
+	 An option `--' means the same thing; this is the standard
+	 getopt(3) meaning. */
+      if (arg_string[0] == '-' &&
+	   (arg_string[1] == '\0' ||
+	     (arg_string[1] == '-' && arg_string[2] == '\0')))
+	return (next_arg);
+
+      i = 1;
+      on_or_off = arg_string[0];
+      while (arg_character = arg_string[i++])
+	{
+	  switch (arg_character)
+	    {
+	    case 'c':
+	      want_pending_command = 1;
+	      break;
+
+	    case 'l':
+	      make_login_shell = 1;
+	      break;
+
+	    case 's':
+	      read_from_stdin = 1;
+	      break;
+
+	    case 'o':
+	      o_option = argv[next_arg];
+	      if (o_option == 0)
+		{
+		  set_option_defaults ();
+		  list_minus_o_opts (-1, (on_or_off == '-') ? 0 : 1);
+		  reset_option_defaults ();
+		  break;
+		}
+	      if (set_minus_o_option (on_or_off, o_option) != EXECUTION_SUCCESS)
+		exit (EX_BADUSAGE);
+	      next_arg++;
+	      break;
+
+	    case 'O':
+	      /* Since some of these can be overridden by the normal
+		 interactive/non-interactive shell initialization or
+		 initializing posix mode, we save the options and process
+		 them after initialization. */
+	      o_option = argv[next_arg];
+	      if (o_option == 0)
+		{
+		  shopt_listopt (o_option, (on_or_off == '-') ? 0 : 1);
+		  break;
+		}
+	      add_shopt_to_alist (o_option, on_or_off);
+	      next_arg++;
+	      break;
+
+	    case 'D':
+	      dump_translatable_strings = 1;
+	      break;
+
+	    default:
+	      if (change_flag (arg_character, on_or_off) == FLAG_ERROR)
+		{
+		  report_error (_("%c%c: invalid option"), on_or_off, arg_character);
+		  show_shell_usage (stderr, 0);
+		  exit (EX_BADUSAGE);
+		}
+	    }
+	}
+      /* Can't do just a simple increment anymore -- what about
+	 "bash -abouo emacs ignoreeof -hP"? */
+      arg_index = next_arg;
+    }
+
+  return (arg_index);
+}
+
+/* Exit the shell with status S. */
+void
+exit_shell (s)
+     int s;
+{
+  fflush (stdout);		/* XXX */
+  fflush (stderr);
+
+  /* Clean up the terminal if we are in a state where it's been modified. */
+#if defined (READLINE)
+  if (RL_ISSTATE (RL_STATE_TERMPREPPED) && rl_deprep_term_function)
+    (*rl_deprep_term_function) ();
+#endif
+  if (read_tty_modified ())
+    read_tty_cleanup ();
+
+  /* Do trap[0] if defined.  Allow it to override the exit status
+     passed to us. */
+  if (signal_is_trapped (0))
+    s = run_exit_trap ();
+
+#if defined (PROCESS_SUBSTITUTION)
+  unlink_all_fifos ();
+#endif /* PROCESS_SUBSTITUTION */
+
+#if defined (HISTORY)
+  if (remember_on_history)
+    maybe_save_shell_history ();
+#endif /* HISTORY */
+
+#if defined (COPROCESS_SUPPORT)
+  coproc_flush ();
+#endif
+
+#if defined (JOB_CONTROL)
+  /* If the user has run `shopt -s huponexit', hangup all jobs when we exit
+     an interactive login shell.  ksh does this unconditionally. */
+  if (interactive_shell && login_shell && hup_on_exit)
+    hangup_all_jobs ();
+
+  /* If this shell is interactive, or job control is active, terminate all
+     stopped jobs and restore the original terminal process group.  Don't do
+     this if we're in a subshell and calling exit_shell after, for example,
+     a failed word expansion.  We want to do this even if the shell is not
+     interactive because we set the terminal's process group when job control
+     is enabled regardless of the interactive status. */
+  if (subshell_environment == 0)
+    end_job_control ();
+#endif /* JOB_CONTROL */
+
+  /* Always return the exit status of the last command to our parent. */
+  sh_exit (s);
+}
+
+/* A wrapper for exit that (optionally) can do other things, like malloc
+   statistics tracing. */
+void
+sh_exit (s)
+     int s;
+{
+#if defined (MALLOC_DEBUG) && defined (USING_BASH_MALLOC)
+  if (malloc_trace_at_exit && (subshell_environment & (SUBSHELL_COMSUB|SUBSHELL_PROCSUB)) == 0)
+    trace_malloc_stats (get_name_for_error (), (char *)NULL);
+  /* mlocation_write_table (); */
+#endif
+
+  exit (s);
+}
+
+/* Exit a subshell, which includes calling the exit trap.  We don't want to
+   do any more cleanup, since a subshell is created as an exact copy of its
+   parent. */
+void
+subshell_exit (s)
+     int s;
+{
+  fflush (stdout);
+  fflush (stderr);
+
+  /* Do trap[0] if defined.  Allow it to override the exit status
+     passed to us. */
+  if (signal_is_trapped (0))
+    s = run_exit_trap ();
+
+  sh_exit (s);
+}
+
+void
+set_exit_status (s)
+     int s;
+{
+  set_pipestatus_from_exit (last_command_exit_value = s);
+}
+
+/* Source the bash startup files.  If POSIXLY_CORRECT is non-zero, we obey
+   the Posix.2 startup file rules:  $ENV is expanded, and if the file it
+   names exists, that file is sourced.  The Posix.2 rules are in effect
+   for interactive shells only. (section 4.56.5.3) */
+
+/* Execute ~/.bashrc for most shells.  Never execute it if
+   ACT_LIKE_SH is set, or if NO_RC is set.
+
+   If the executable file "/usr/gnu/src/bash/foo" contains:
+
+   #!/usr/gnu/bin/bash
+   echo hello
+
+   then:
+
+	 COMMAND	    EXECUTE BASHRC
+	 --------------------------------
+	 bash -c foo		NO
+	 bash foo		NO
+	 foo			NO
+	 rsh machine ls		YES (for rsh, which calls `bash -c')
+	 rsh machine foo	YES (for shell started by rsh) NO (for foo!)
+	 echo ls | bash		NO
+	 login			NO
+	 bash			YES
+*/
+
+static void
+execute_env_file (env_file)
+      char *env_file;
+{
+  char *fn;
+
+  if (env_file && *env_file)
+    {
+      fn = expand_string_unsplit_to_string (env_file, Q_DOUBLE_QUOTES);
+      if (fn && *fn)
+	maybe_execute_file (fn, 1);
+      FREE (fn);
+    }
+}
+
+static void
+run_startup_files ()
+{
+#if defined (JOB_CONTROL)
+  int old_job_control;
+#endif
+  int sourced_login, run_by_ssh;
+
+  /* get the rshd/sshd case out of the way first. */
+  if (interactive_shell == 0 && no_rc == 0 && login_shell == 0 &&
+      act_like_sh == 0 && command_execution_string)
+    {
+#ifdef SSH_SOURCE_BASHRC
+      run_by_ssh = (find_variable ("SSH_CLIENT") != (SHELL_VAR *)0) ||
+		   (find_variable ("SSH2_CLIENT") != (SHELL_VAR *)0);
+#else
+      run_by_ssh = 0;
+#endif
+
+      /* If we were run by sshd or we think we were run by rshd, execute
+	 ~/.bashrc if we are a top-level shell. */
+      if ((run_by_ssh || isnetconn (fileno (stdin))) && shell_level < 2)
+	{
+#ifdef SYS_BASHRC
+#  if defined (__OPENNT)
+	  maybe_execute_file (_prefixInstallPath(SYS_BASHRC, NULL, 0), 1);
+#  else
+	  maybe_execute_file (SYS_BASHRC, 1);
+#  endif
+#endif
+	  maybe_execute_file (bashrc_file, 1);
+	  return;
+	}
+    }
+
+#if defined (JOB_CONTROL)
+  /* Startup files should be run without job control enabled. */
+  old_job_control = interactive_shell ? set_job_control (0) : 0;
+#endif
+
+  sourced_login = 0;
+
+  /* A shell begun with the --login (or -l) flag that is not in posix mode
+     runs the login shell startup files, no matter whether or not it is
+     interactive.  If NON_INTERACTIVE_LOGIN_SHELLS is defined, run the
+     startup files if argv[0][0] == '-' as well. */
+#if defined (NON_INTERACTIVE_LOGIN_SHELLS)
+  if (login_shell && posixly_correct == 0)
+#else
+  if (login_shell < 0 && posixly_correct == 0)
+#endif
+    {
+      /* We don't execute .bashrc for login shells. */
+      no_rc++;
+
+      /* Execute /etc/profile and one of the personal login shell
+	 initialization files. */
+      if (no_profile == 0)
+	{
+	  maybe_execute_file (SYS_PROFILE, 1);
+
+	  if (act_like_sh)	/* sh */
+	    maybe_execute_file ("~/.profile", 1);
+	  else if ((maybe_execute_file ("~/.bash_profile", 1) == 0) &&
+		   (maybe_execute_file ("~/.bash_login", 1) == 0))	/* bash */
+	    maybe_execute_file ("~/.profile", 1);
+	}
+
+      sourced_login = 1;
+    }
+
+  /* A non-interactive shell not named `sh' and not in posix mode reads and
+     executes commands from $BASH_ENV.  If `su' starts a shell with `-c cmd'
+     and `-su' as the name of the shell, we want to read the startup files.
+     No other non-interactive shells read any startup files. */
+  if (interactive_shell == 0 && !(su_shell && login_shell))
+    {
+      if (posixly_correct == 0 && act_like_sh == 0 && privileged_mode == 0 &&
+	    sourced_env++ == 0)
+	execute_env_file (get_string_value ("BASH_ENV"));
+      return;
+    }
+
+  /* Interactive shell or `-su' shell. */
+  if (posixly_correct == 0)		  /* bash, sh */
+    {
+      if (login_shell && sourced_login++ == 0)
+	{
+	  /* We don't execute .bashrc for login shells. */
+	  no_rc++;
+
+	  /* Execute /etc/profile and one of the personal login shell
+	     initialization files. */
+	  if (no_profile == 0)
+	    {
+	      maybe_execute_file (SYS_PROFILE, 1);
+
+	      if (act_like_sh)	/* sh */
+		maybe_execute_file ("~/.profile", 1);
+	      else if ((maybe_execute_file ("~/.bash_profile", 1) == 0) &&
+		       (maybe_execute_file ("~/.bash_login", 1) == 0))	/* bash */
+		maybe_execute_file ("~/.profile", 1);
+	    }
+	}
+
+      /* bash */
+      if (act_like_sh == 0 && no_rc == 0)
+	{
+#ifdef SYS_BASHRC
+#  if defined (__OPENNT)
+	  maybe_execute_file (_prefixInstallPath(SYS_BASHRC, NULL, 0), 1);
+#  else
+	  maybe_execute_file (SYS_BASHRC, 1);
+#  endif
+#endif
+	  maybe_execute_file (bashrc_file, 1);
+	}
+      /* sh */
+      else if (act_like_sh && privileged_mode == 0 && sourced_env++ == 0)
+	execute_env_file (get_string_value ("ENV"));
+    }
+  else		/* bash --posix, sh --posix */
+    {
+      /* bash and sh */
+      if (interactive_shell && privileged_mode == 0 && sourced_env++ == 0)
+	execute_env_file (get_string_value ("ENV"));
+    }
+
+#if defined (JOB_CONTROL)
+  set_job_control (old_job_control);
+#endif
+}
+
+#if defined (RESTRICTED_SHELL)
+/* Return 1 if the shell should be a restricted one based on NAME or the
+   value of `restricted'.  Don't actually do anything, just return a
+   boolean value. */
+int
+shell_is_restricted (name)
+     char *name;
+{
+  char *temp;
+
+  if (restricted)
+    return 1;
+  temp = base_pathname (name);
+  if (*temp == '-')
+    temp++;
+  return (STREQ (temp, RESTRICTED_SHELL_NAME));
+}
+
+/* Perhaps make this shell a `restricted' one, based on NAME.  If the
+   basename of NAME is "rbash", then this shell is restricted.  The
+   name of the restricted shell is a configurable option, see config.h.
+   In a restricted shell, PATH, SHELL, ENV, and BASH_ENV are read-only
+   and non-unsettable.
+   Do this also if `restricted' is already set to 1; maybe the shell was
+   started with -r. */
+int
+maybe_make_restricted (name)
+     char *name;
+{
+  char *temp;
+
+  temp = base_pathname (name);
+  if (*temp == '-')
+    temp++;
+  if (restricted || (STREQ (temp, RESTRICTED_SHELL_NAME)))
+    {
+#if defined (RBASH_STATIC_PATH_VALUE)
+      bind_variable ("PATH", RBASH_STATIC_PATH_VALUE, 0);
+      stupidly_hack_special_variables ("PATH");		/* clear hash table */
+#endif
+      set_var_read_only ("PATH");
+      set_var_read_only ("SHELL");
+      set_var_read_only ("ENV");
+      set_var_read_only ("BASH_ENV");
+      set_var_read_only ("HISTFILE");
+      restricted = 1;
+    }
+  return (restricted);
+}
+#endif /* RESTRICTED_SHELL */
+
+/* Fetch the current set of uids and gids and return 1 if we're running
+   setuid or setgid. */
+static int
+uidget ()
+{
+  uid_t u;
+
+  u = getuid ();
+  if (current_user.uid != u)
+    {
+      FREE (current_user.user_name);
+      FREE (current_user.shell);
+      FREE (current_user.home_dir);
+      current_user.user_name = current_user.shell = current_user.home_dir = (char *)NULL;
+    }
+  current_user.uid = u;
+  current_user.gid = getgid ();
+  current_user.euid = geteuid ();
+  current_user.egid = getegid ();
+
+  /* See whether or not we are running setuid or setgid. */
+  return (current_user.uid != current_user.euid) ||
+	   (current_user.gid != current_user.egid);
+}
+
+void
+disable_priv_mode ()
+{
+  int e;
+
+#if HAVE_SETRESUID
+  if (setresuid (current_user.uid, current_user.uid, current_user.uid) < 0)
+#else
+  if (setuid (current_user.uid) < 0)
+#endif
+    {
+      e = errno;
+      sys_error (_("cannot set uid to %d: effective uid %d"), current_user.uid, current_user.euid);
+#if defined (EXIT_ON_SETUID_FAILURE)
+      if (e == EAGAIN)
+	exit (e);
+#endif
+    }
+#if HAVE_SETRESGID
+  if (setresgid (current_user.gid, current_user.gid, current_user.gid) < 0)
+#else
+  if (setgid (current_user.gid) < 0)
+#endif
+    sys_error (_("cannot set gid to %d: effective gid %d"), current_user.gid, current_user.egid);
+
+  current_user.euid = current_user.uid;
+  current_user.egid = current_user.gid;
+}
+
+#if defined (WORDEXP_OPTION)
+static int
+run_wordexp (words)
+     char *words;
+{
+  int code, nw, nb;
+  WORD_LIST *wl, *tl, *result;
+
+  code = setjmp_nosigs (top_level);
+
+  if (code != NOT_JUMPED)
+    {
+      switch (code)
+	{
+	  /* Some kind of throw to top_level has occurred. */
+	case FORCE_EOF:
+	  return last_command_exit_value = 127;
+	case ERREXIT:
+	case EXITPROG:
+	  return last_command_exit_value;
+	case DISCARD:
+	  return last_command_exit_value = 1;
+	default:
+	  command_error ("run_wordexp", CMDERR_BADJUMP, code, 0);
+	}
+    }
+
+  /* Run it through the parser to get a list of words and expand them */
+  if (words && *words)
+    {
+      with_input_from_string (words, "--wordexp");
+      if (parse_command () != 0)
+	return (126);
+      if (global_command == 0)
+	{
+	  printf ("0\n0\n");
+	  return (0);
+	}
+      if (global_command->type != cm_simple)
+	return (126);
+      wl = global_command->value.Simple->words;
+      if (protected_mode)
+	for (tl = wl; tl; tl = tl->next)
+	  tl->word->flags |= W_NOCOMSUB|W_NOPROCSUB;
+      result = wl ? expand_words_no_vars (wl) : (WORD_LIST *)0;
+    }
+  else
+    result = (WORD_LIST *)0;
+
+  last_command_exit_value = 0;
+
+  if (result == 0)
+    {
+      printf ("0\n0\n");
+      return (0);
+    }
+
+  /* Count up the number of words and bytes, and print them.  Don't count
+     the trailing NUL byte. */
+  for (nw = nb = 0, wl = result; wl; wl = wl->next)
+    {
+      nw++;
+      nb += strlen (wl->word->word);
+    }
+  printf ("%u\n%u\n", nw, nb);
+  /* Print each word on a separate line.  This will have to be changed when
+     the interface to glibc is completed. */
+  for (wl = result; wl; wl = wl->next)
+    printf ("%s\n", wl->word->word);
+
+  return (0);
+}
+#endif
+
+#if defined (ONESHOT)
+/* Run one command, given as the argument to the -c option.  Tell
+   parse_and_execute not to fork for a simple command. */
+static int
+run_one_command (command)
+     char *command;
+{
+  int code;
+
+  code = setjmp_nosigs (top_level);
+
+  if (code != NOT_JUMPED)
+    {
+#if defined (PROCESS_SUBSTITUTION)
+      unlink_fifo_list ();
+#endif /* PROCESS_SUBSTITUTION */
+      switch (code)
+	{
+	  /* Some kind of throw to top_level has occurred. */
+	case FORCE_EOF:
+	  return last_command_exit_value = 127;
+	case ERREXIT:
+	case EXITPROG:
+	  return last_command_exit_value;
+	case DISCARD:
+	  return last_command_exit_value = 1;
+	default:
+	  command_error ("run_one_command", CMDERR_BADJUMP, code, 0);
+	}
+    }
+   return (parse_and_execute (savestring (command), "-c", SEVAL_NOHIST|SEVAL_RESETLINE));
+}
+#endif /* ONESHOT */
+
+static int
+bind_args (argv, arg_start, arg_end, start_index)
+     char **argv;
+     int arg_start, arg_end, start_index;
+{
+  register int i;
+  WORD_LIST *args, *tl;
+
+  for (i = arg_start, args = tl = (WORD_LIST *)NULL; i < arg_end; i++)
+    {
+      if (args == 0)
+	args = tl = make_word_list (make_word (argv[i]), args);
+      else
+	{
+	  tl->next = make_word_list (make_word (argv[i]), (WORD_LIST *)NULL);
+	  tl = tl->next;
+	}
+    }
+
+  if (args)
+    {
+      if (start_index == 0)	/* bind to $0...$n for sh -c command */
+	{
+	  /* Posix.2 4.56.3 says that the first argument after sh -c command
+	     becomes $0, and the rest of the arguments become $1...$n */
+	  shell_name = savestring (args->word->word);
+	  FREE (dollar_vars[0]);
+	  dollar_vars[0] = savestring (args->word->word);
+	  remember_args (args->next, 1);
+	  if (debugging_mode)
+	    {
+	      push_args (args->next);	/* BASH_ARGV and BASH_ARGC */
+	      bash_argv_initialized = 1;
+	    }
+	}
+      else			/* bind to $1...$n for shell script */
+        {
+	  remember_args (args, 1);
+	  /* We do this unconditionally so something like -O extdebug doesn't
+	     do it first.  We're setting the definitive positional params
+	     here. */
+	  if (debugging_mode)
+	    {
+	      push_args (args);		/* BASH_ARGV and BASH_ARGC */
+	      bash_argv_initialized = 1;
+	    }
+        }
+
+      dispose_words (args);
+    }
+
+  return (i);
+}
+
+void
+unbind_args ()
+{
+  remember_args ((WORD_LIST *)NULL, 1);
+  pop_args ();				/* Reset BASH_ARGV and BASH_ARGC */
+}
+
+static void
+start_debugger ()
+{
+#if defined (DEBUGGER) && defined (DEBUGGER_START_FILE)
+  int old_errexit;
+  int r;
+
+  old_errexit = exit_immediately_on_error;
+  exit_immediately_on_error = 0;
+
+  r = force_execute_file (DEBUGGER_START_FILE, 1);
+  if (r < 0)
+    {
+      internal_warning (_("cannot start debugger; debugging mode disabled"));
+      debugging_mode = 0;
+    }
+  error_trace_mode = function_trace_mode = debugging_mode;
+
+  set_shellopts ();
+  set_bashopts ();
+
+  exit_immediately_on_error += old_errexit;
+#endif
+}
+
+static int
+open_shell_script (script_name)
+     char *script_name;
+{
+  int fd, e, fd_is_tty;
+  char *filename, *path_filename, *t;
+  char sample[80];
+  int sample_len;
+  struct stat sb;
+#if defined (ARRAY_VARS)
+  SHELL_VAR *funcname_v, *bash_source_v, *bash_lineno_v;
+  ARRAY *funcname_a, *bash_source_a, *bash_lineno_a;
+#endif
+
+  filename = savestring (script_name);
+
+  fd = open (filename, O_RDONLY);
+  if ((fd < 0) && (errno == ENOENT) && (absolute_program (filename) == 0))
+    {
+      e = errno;
+      /* If it's not in the current directory, try looking through PATH
+	 for it. */
+      path_filename = find_path_file (script_name);
+      if (path_filename)
+	{
+	  free (filename);
+	  filename = path_filename;
+	  fd = open (filename, O_RDONLY);
+	}
+      else
+	errno = e;
+    }
+
+  if (fd < 0)
+    {
+      e = errno;
+      file_error (filename);
+#if defined (JOB_CONTROL)
+      end_job_control ();	/* just in case we were run as bash -i script */
+#endif
+      sh_exit ((e == ENOENT) ? EX_NOTFOUND : EX_NOINPUT);
+    }
+
+  free (dollar_vars[0]);
+  dollar_vars[0] = exec_argv0 ? savestring (exec_argv0) : savestring (script_name);
+  if (exec_argv0)
+    {
+      free (exec_argv0);
+      exec_argv0 = (char *)NULL;
+    }
+
+  if (file_isdir (filename))
+    {
+#if defined (EISDIR)
+      errno = EISDIR;
+#else
+      errno = EINVAL;
+#endif
+      file_error (filename);
+#if defined (JOB_CONTROL)
+      end_job_control ();	/* just in case we were run as bash -i script */
+#endif
+      sh_exit (EX_NOINPUT);
+    }
+
+#if defined (ARRAY_VARS)
+  GET_ARRAY_FROM_VAR ("FUNCNAME", funcname_v, funcname_a);
+  GET_ARRAY_FROM_VAR ("BASH_SOURCE", bash_source_v, bash_source_a);
+  GET_ARRAY_FROM_VAR ("BASH_LINENO", bash_lineno_v, bash_lineno_a);
+
+  array_push (bash_source_a, filename);
+  if (bash_lineno_a)
+    {
+      t = itos (executing_line_number ());
+      array_push (bash_lineno_a, t);
+      free (t);
+    }
+  array_push (funcname_a, "main");
+#endif
+
+#ifdef HAVE_DEV_FD
+  fd_is_tty = isatty (fd);
+#else
+  fd_is_tty = 0;
+#endif
+
+  /* Only do this with non-tty file descriptors we can seek on. */
+  if (fd_is_tty == 0 && (lseek (fd, 0L, 1) != -1))
+    {
+      /* Check to see if the `file' in `bash file' is a binary file
+	 according to the same tests done by execute_simple_command (),
+	 and report an error and exit if it is. */
+      sample_len = read (fd, sample, sizeof (sample));
+      if (sample_len < 0)
+	{
+	  e = errno;
+	  if ((fstat (fd, &sb) == 0) && S_ISDIR (sb.st_mode))
+	    {
+#if defined (EISDIR)
+	      errno = EISDIR;
+	      file_error (filename);
+#else	      
+	      internal_error (_("%s: Is a directory"), filename);
+#endif
+	    }
+	  else
+	    {
+	      errno = e;
+	      file_error (filename);
+	    }
+#if defined (JOB_CONTROL)
+	  end_job_control ();	/* just in case we were run as bash -i script */
+#endif
+	  exit (EX_NOEXEC);
+	}
+      else if (sample_len > 0 && (check_binary_file (sample, sample_len)))
+	{
+	  internal_error (_("%s: cannot execute binary file"), filename);
+#if defined (JOB_CONTROL)
+	  end_job_control ();	/* just in case we were run as bash -i script */
+#endif
+	  exit (EX_BINARY_FILE);
+	}
+      /* Now rewind the file back to the beginning. */
+      lseek (fd, 0L, 0);
+    }
+
+  /* Open the script.  But try to move the file descriptor to a randomly
+     large one, in the hopes that any descriptors used by the script will
+     not match with ours. */
+  fd = move_to_high_fd (fd, 1, -1);
+
+#if defined (BUFFERED_INPUT)
+  default_buffered_input = fd;
+  SET_CLOSE_ON_EXEC (default_buffered_input);
+#else /* !BUFFERED_INPUT */
+  default_input = fdopen (fd, "r");
+
+  if (default_input == 0)
+    {
+      file_error (filename);
+      exit (EX_NOTFOUND);
+    }
+
+  SET_CLOSE_ON_EXEC (fd);
+  if (fileno (default_input) != fd)
+    SET_CLOSE_ON_EXEC (fileno (default_input));
+#endif /* !BUFFERED_INPUT */
+
+  /* Just about the only way for this code to be executed is if something
+     like `bash -i /dev/stdin' is executed. */
+  if (interactive_shell && fd_is_tty)
+    {
+      dup2 (fd, 0);
+      close (fd);
+      fd = 0;
+#if defined (BUFFERED_INPUT)
+      default_buffered_input = 0;
+#else
+      fclose (default_input);
+      default_input = stdin;
+#endif
+    }
+  else if (forced_interactive && fd_is_tty == 0)
+    /* But if a script is called with something like `bash -i scriptname',
+       we need to do a non-interactive setup here, since we didn't do it
+       before. */
+    init_interactive_script ();
+
+  free (filename);
+
+  reading_shell_script = 1;
+  return (fd);
+}
+
+/* Initialize the input routines for the parser. */
+static void
+set_bash_input ()
+{
+  /* Make sure the fd from which we are reading input is not in
+     no-delay mode. */
+#if defined (BUFFERED_INPUT)
+  if (interactive == 0)
+    sh_unset_nodelay_mode (default_buffered_input);
+  else
+#endif /* !BUFFERED_INPUT */
+    sh_unset_nodelay_mode (fileno (stdin));
+
+  /* with_input_from_stdin really means `with_input_from_readline' */
+  if (interactive && no_line_editing == 0)
+    with_input_from_stdin ();
+#if defined (BUFFERED_INPUT)
+  else if (interactive == 0)
+    with_input_from_buffered_stream (default_buffered_input, dollar_vars[0]);
+#endif /* BUFFERED_INPUT */
+  else
+    with_input_from_stream (default_input, dollar_vars[0]);
+}
+
+/* Close the current shell script input source and forget about it.  This is
+   extern so execute_cmd.c:initialize_subshell() can call it.  If CHECK_ZERO
+   is non-zero, we close default_buffered_input even if it's the standard
+   input (fd 0). */
+void
+unset_bash_input (check_zero)
+     int check_zero;
+{
+#if defined (BUFFERED_INPUT)
+  if ((check_zero && default_buffered_input >= 0) ||
+      (check_zero == 0 && default_buffered_input > 0))
+    {
+      close_buffered_fd (default_buffered_input);
+      default_buffered_input = bash_input.location.buffered_fd = -1;
+      bash_input.type = st_none;		/* XXX */
+    }
+#else /* !BUFFERED_INPUT */
+  if (default_input)
+    {
+      fclose (default_input);
+      default_input = (FILE *)NULL;
+    }
+#endif /* !BUFFERED_INPUT */
+}
+      
+
+#if !defined (PROGRAM)
+#  define PROGRAM "bash"
+#endif
+
+static void
+set_shell_name (argv0)
+     char *argv0;
+{
+  /* Here's a hack.  If the name of this shell is "sh", then don't do
+     any startup files; just try to be more like /bin/sh. */
+  shell_name = argv0 ? base_pathname (argv0) : PROGRAM;
+
+  if (argv0 && *argv0 == '-')
+    {
+      if (*shell_name == '-')
+	shell_name++;
+      login_shell = 1;
+    }
+
+  if (shell_name[0] == 's' && shell_name[1] == 'h' && shell_name[2] == '\0')
+    act_like_sh++;
+  if (shell_name[0] == 's' && shell_name[1] == 'u' && shell_name[2] == '\0')
+    su_shell++;
+
+  shell_name = argv0 ? argv0 : PROGRAM;
+  FREE (dollar_vars[0]);
+  dollar_vars[0] = savestring (shell_name);
+
+  /* A program may start an interactive shell with
+	  "execl ("/bin/bash", "-", NULL)".
+     If so, default the name of this shell to our name. */
+  if (!shell_name || !*shell_name || (shell_name[0] == '-' && !shell_name[1]))
+    shell_name = PROGRAM;
+}
+
+/* Some options are initialized to -1 so we have a way to determine whether
+   they were set on the command line. This is an issue when listing the option
+   values at invocation (`bash -o'), so we set the defaults here and reset
+   them after the call to list_minus_o_options (). */
+/* XXX - could also do this for histexp_flag, jobs_m_flag */
+static void
+set_option_defaults ()
+{
+#if defined (HISTORY)
+  enable_history_list = 0;
+#endif
+}
+
+static void
+reset_option_defaults ()
+{
+#if defined (HISTORY)
+  enable_history_list = -1;
+#endif
+}
+
+static void
+init_interactive ()
+{
+  expand_aliases = interactive_shell = startup_state = 1;
+  interactive = 1;
+#if defined (HISTORY)
+  if (enable_history_list == -1)
+    enable_history_list = 1;				/* set default  */
+  remember_on_history = enable_history_list;
+#  if defined (BANG_HISTORY)
+  histexp_flag = history_expansion;			/* XXX */
+#  endif
+#endif
+}
+
+static void
+init_noninteractive ()
+{
+#if defined (HISTORY)
+  if (enable_history_list == -1)			/* set default */
+    enable_history_list = 0;
+  bash_history_reinit (0);
+#endif /* HISTORY */
+  interactive_shell = startup_state = interactive = 0;
+  expand_aliases = posixly_correct;	/* XXX - was 0 not posixly_correct */
+  no_line_editing = 1;
+#if defined (JOB_CONTROL)
+  /* Even if the shell is not interactive, enable job control if the -i or
+     -m option is supplied at startup. */
+  set_job_control (forced_interactive||jobs_m_flag);
+#endif /* JOB_CONTROL */
+}
+
+static void
+init_interactive_script ()
+{
+#if defined (HISTORY)
+  if (enable_history_list == -1)
+    enable_history_list = 1;
+#endif
+  init_noninteractive ();
+  expand_aliases = interactive_shell = startup_state = 1;
+#if defined (HISTORY)
+  remember_on_history = enable_history_list;	/* XXX */
+#endif
+}
+
+void
+get_current_user_info ()
+{
+  struct passwd *entry;
+
+  /* Don't fetch this more than once. */
+  if (current_user.user_name == 0)
+    {
+#if defined (__TANDEM)
+      entry = getpwnam (getlogin ());
+#else
+      entry = getpwuid (current_user.uid);
+#endif
+      if (entry)
+	{
+	  current_user.user_name = savestring (entry->pw_name);
+	  current_user.shell = (entry->pw_shell && entry->pw_shell[0])
+				? savestring (entry->pw_shell)
+				: savestring ("/bin/sh");
+	  current_user.home_dir = savestring (entry->pw_dir);
+	}
+      else
+	{
+	  current_user.user_name = _("I have no name!");
+	  current_user.user_name = savestring (current_user.user_name);
+	  current_user.shell = savestring ("/bin/sh");
+	  current_user.home_dir = savestring ("/");
+	}
+#if defined (HAVE_GETPWENT)
+      endpwent ();
+#endif
+    }
+}
+
+/* Do whatever is necessary to initialize the shell.
+   Put new initializations in here. */
+static void
+shell_initialize ()
+{
+  char hostname[256];
+  int should_be_restricted;
+
+  /* Line buffer output for stderr and stdout. */
+  if (shell_initialized == 0)
+    {
+      sh_setlinebuf (stderr);
+      sh_setlinebuf (stdout);
+    }
+
+  /* Sort the array of shell builtins so that the binary search in
+     find_shell_builtin () works correctly. */
+  initialize_shell_builtins ();
+
+  /* Initialize the trap signal handlers before installing our own
+     signal handlers.  traps.c:restore_original_signals () is responsible
+     for restoring the original default signal handlers.  That function
+     is called when we make a new child. */
+  initialize_traps ();
+  initialize_signals (0);
+
+  /* It's highly unlikely that this will change. */
+  if (current_host_name == 0)
+    {
+      /* Initialize current_host_name. */
+      if (gethostname (hostname, 255) < 0)
+	current_host_name = "??host??";
+      else
+	current_host_name = savestring (hostname);
+    }
+
+  /* Initialize the stuff in current_user that comes from the password
+     file.  We don't need to do this right away if the shell is not
+     interactive. */
+  if (interactive_shell)
+    get_current_user_info ();
+
+  /* Initialize our interface to the tilde expander. */
+  tilde_initialize ();
+
+#if defined (RESTRICTED_SHELL)
+  should_be_restricted = shell_is_restricted (shell_name);
+#endif
+
+  /* Initialize internal and environment variables.  Don't import shell
+     functions from the environment if we are running in privileged or
+     restricted mode or if the shell is running setuid. */
+#if defined (RESTRICTED_SHELL)
+  initialize_shell_variables (shell_environment, privileged_mode||restricted||should_be_restricted||running_setuid);
+#else
+  initialize_shell_variables (shell_environment, privileged_mode||running_setuid);
+#endif
+
+  /* Initialize the data structures for storing and running jobs. */
+  initialize_job_control (jobs_m_flag);
+
+  /* Initialize input streams to null. */
+  initialize_bash_input ();
+
+  initialize_flags ();
+
+  /* Initialize the shell options.  Don't import the shell options
+     from the environment variables $SHELLOPTS or $BASHOPTS if we are
+     running in privileged or restricted mode or if the shell is running
+     setuid. */
+#if defined (RESTRICTED_SHELL)
+  initialize_shell_options (privileged_mode||restricted||should_be_restricted||running_setuid);
+  initialize_bashopts (privileged_mode||restricted||should_be_restricted||running_setuid);
+#else
+  initialize_shell_options (privileged_mode||running_setuid);
+  initialize_bashopts (privileged_mode||running_setuid);
+#endif
+}
+
+/* Function called by main () when it appears that the shell has already
+   had some initialization performed.  This is supposed to reset the world
+   back to a pristine state, as if we had been exec'ed. */
+static void
+shell_reinitialize ()
+{
+  /* The default shell prompts. */
+  primary_prompt = PPROMPT;
+  secondary_prompt = SPROMPT;
+
+  /* Things that get 1. */
+  current_command_number = 1;
+
+  /* We have decided that the ~/.bashrc file should not be executed
+     for the invocation of each shell script.  If the variable $ENV
+     (or $BASH_ENV) is set, its value is used as the name of a file
+     to source. */
+  no_rc = no_profile = 1;
+
+  /* Things that get 0. */
+  login_shell = make_login_shell = interactive = executing = 0;
+  debugging = do_version = line_number = last_command_exit_value = 0;
+  forced_interactive = interactive_shell = 0;
+  subshell_environment = running_in_background = 0;
+  expand_aliases = 0;
+  bash_argv_initialized = 0;
+
+  /* XXX - should we set jobs_m_flag to 0 here? */
+
+#if defined (HISTORY)
+  bash_history_reinit (enable_history_list = 0);
+#endif /* HISTORY */
+
+#if defined (RESTRICTED_SHELL)
+  restricted = 0;
+#endif /* RESTRICTED_SHELL */
+
+  /* Ensure that the default startup file is used.  (Except that we don't
+     execute this file for reinitialized shells). */
+  bashrc_file = DEFAULT_BASHRC;
+
+  /* Delete all variables and functions.  They will be reinitialized when
+     the environment is parsed. */
+  delete_all_contexts (shell_variables);
+  delete_all_variables (shell_functions);
+
+  reinit_special_variables ();
+
+#if defined (READLINE)
+  bashline_reinitialize ();
+#endif
+
+  shell_reinitialized = 1;
+}
+
+static void
+show_shell_usage (fp, extra)
+     FILE *fp;
+     int extra;
+{
+  int i;
+  char *set_opts, *s, *t;
+
+  if (extra)
+    fprintf (fp, _("GNU bash, version %s-(%s)\n"), shell_version_string (), MACHTYPE);
+  fprintf (fp, _("Usage:\t%s [GNU long option] [option] ...\n\t%s [GNU long option] [option] script-file ...\n"),
+	     shell_name, shell_name);
+  fputs (_("GNU long options:\n"), fp);
+  for (i = 0; long_args[i].name; i++)
+    fprintf (fp, "\t--%s\n", long_args[i].name);
+
+  fputs (_("Shell options:\n"), fp);
+  fputs (_("\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"), fp);
+
+  for (i = 0, set_opts = 0; shell_builtins[i].name; i++)
+    if (STREQ (shell_builtins[i].name, "set"))
+      {
+	set_opts = savestring (shell_builtins[i].short_doc);
+	break;
+      }
+
+  if (set_opts)
+    {
+      s = strchr (set_opts, '[');
+      if (s == 0)
+	s = set_opts;
+      while (*++s == '-')
+	;
+      t = strchr (s, ']');
+      if (t)
+	*t = '\0';
+      fprintf (fp, _("\t-%s or -o option\n"), s);
+      free (set_opts);
+    }
+
+  if (extra)
+    {
+      fprintf (fp, _("Type `%s -c \"help set\"' for more information about shell options.\n"), shell_name);
+      fprintf (fp, _("Type `%s -c help' for more information about shell builtin commands.\n"), shell_name);
+      fprintf (fp, _("Use the `bashbug' command to report bugs.\n"));
+      fprintf (fp, "\n");
+      fprintf (fp, _("bash home page: <http://www.gnu.org/software/bash>\n"));
+      fprintf (fp, _("General help using GNU software: <http://www.gnu.org/gethelp/>\n"));
+    }
+}
+
+static void
+add_shopt_to_alist (opt, on_or_off)
+     char *opt;
+     int on_or_off;
+{
+  if (shopt_ind >= shopt_len)
+    {
+      shopt_len += 8;
+      shopt_alist = (STRING_INT_ALIST *)xrealloc (shopt_alist, shopt_len * sizeof (shopt_alist[0]));
+    }
+  shopt_alist[shopt_ind].word = opt;
+  shopt_alist[shopt_ind].token = on_or_off;
+  shopt_ind++;
+}
+
+static void
+run_shopt_alist ()
+{
+  register int i;
+
+  for (i = 0; i < shopt_ind; i++)
+    if (shopt_setopt (shopt_alist[i].word, (shopt_alist[i].token == '-')) != EXECUTION_SUCCESS)
+      exit (EX_BADUSAGE);
+  free (shopt_alist);
+  shopt_alist = 0;
+  shopt_ind = shopt_len = 0;
+}
diff --git a/shell.h b/shell.h
new file mode 100644
index 0000000..8b41792
--- /dev/null
+++ b/shell.h
@@ -0,0 +1,229 @@
+/* shell.h -- The data structures used by the shell */
+
+/* Copyright (C) 1993-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "bashjmp.h"
+
+#include "command.h"
+#include "syntax.h"
+#include "general.h"
+#include "error.h"
+#include "variables.h"
+#include "arrayfunc.h"
+#include "quit.h"
+#include "maxpath.h"
+#include "unwind_prot.h"
+#include "dispose_cmd.h"
+#include "make_cmd.h"
+#include "ocache.h"
+#include "subst.h"
+#include "sig.h"
+#include "pathnames.h"
+#include "externs.h"
+
+extern int EOF_Reached;
+
+#define NO_PIPE -1
+#define REDIRECT_BOTH -2
+
+#define NO_VARIABLE -1
+
+/* Values that can be returned by execute_command (). */
+#define EXECUTION_FAILURE 1
+#define EXECUTION_SUCCESS 0
+
+/* Usage messages by builtins result in a return status of 2. */
+#define EX_BADUSAGE	2
+
+#define EX_MISCERROR	2
+
+/* Special exit statuses used by the shell, internally and externally. */
+#define EX_RETRYFAIL	124
+#define EX_WEXPCOMSUB	125
+#define EX_BINARY_FILE	126
+#define EX_NOEXEC	126
+#define EX_NOINPUT	126
+#define EX_NOTFOUND	127
+
+#define EX_SHERRBASE	256	/* all special error values are > this. */
+
+#define EX_BADSYNTAX	257	/* shell syntax error */
+#define EX_USAGE	258	/* syntax error in usage */
+#define EX_REDIRFAIL	259	/* redirection failed */
+#define EX_BADASSIGN	260	/* variable assignment error */
+#define EX_EXPFAIL	261	/* word expansion failed */
+#define EX_DISKFALLBACK	262	/* fall back to disk command from builtin */
+
+/* Flag values that control parameter pattern substitution. */
+#define MATCH_ANY	0x000
+#define MATCH_BEG	0x001
+#define MATCH_END	0x002
+
+#define MATCH_TYPEMASK	0x003
+
+#define MATCH_GLOBREP	0x010
+#define MATCH_QUOTED	0x020
+#define MATCH_ASSIGNRHS	0x040
+#define MATCH_STARSUB	0x080
+
+/* Some needed external declarations. */
+extern char **shell_environment;
+extern WORD_LIST *rest_of_args;
+
+/* Generalized global variables. */
+extern char *command_execution_string;
+
+extern int debugging_mode;
+extern int executing, login_shell;
+extern int interactive, interactive_shell;
+extern int startup_state;
+extern int reading_shell_script;
+extern int shell_initialized;
+extern int bash_argv_initialized;
+extern int subshell_environment;
+extern int current_command_number;
+extern int indirection_level;
+extern int shell_compatibility_level;
+extern int running_under_emacs;
+
+extern int posixly_correct;
+extern int no_line_editing;
+
+extern char *shell_name;
+extern char *current_host_name;
+
+extern int subshell_argc;
+extern char **subshell_argv;
+extern char **subshell_envp;
+
+/* variables managed using shopt */
+extern int hup_on_exit;
+extern int check_jobs_at_exit;
+extern int autocd;
+extern int check_window_size;
+
+/* from version.c */
+extern int build_version, patch_level;
+extern char *dist_version, *release_status;
+
+extern int locale_mb_cur_max;
+extern int locale_utf8locale;
+
+/* Structure to pass around that holds a bitmap of file descriptors
+   to close, and the size of that structure.  Used in execute_cmd.c. */
+struct fd_bitmap {
+  int size;
+  char *bitmap;
+};
+
+#define FD_BITMAP_SIZE 32
+
+#define CTLESC '\001'
+#define CTLNUL '\177'
+
+/* Information about the current user. */
+struct user_info {
+  uid_t uid, euid;
+  gid_t gid, egid;
+  char *user_name;
+  char *shell;		/* shell from the password file */
+  char *home_dir;
+};
+
+extern struct user_info current_user;
+
+/* Force gcc to not clobber X on a longjmp().  Old versions of gcc mangle
+   this badly. */
+#if (__GNUC__ > 2) || (__GNUC__ == 2 && __GNUC_MINOR__ > 8)
+#  define USE_VAR(x)	((void) &(x))
+#else
+#  define USE_VAR(x)
+#endif
+
+#define HEREDOC_MAX 16
+
+/* Structure in which to save partial parsing state when doing things like
+   PROMPT_COMMAND and bash_execute_unix_command execution. */
+
+typedef struct _sh_parser_state_t {
+
+  /* parsing state */
+  int parser_state;
+  int *token_state;
+
+  char *token;
+  int token_buffer_size;
+
+  /* input line state -- line number saved elsewhere */
+  int input_line_terminator;
+  int eof_encountered;
+
+#if defined (HANDLE_MULTIBYTE)
+  /* Nothing right now for multibyte state, but might want something later. */
+#endif
+
+  char **prompt_string_pointer;
+
+  /* history state affecting or modified by the parser */
+  int current_command_line_count;
+#if defined (HISTORY)
+  int remember_on_history;
+  int history_expansion_inhibited;
+#endif
+
+  /* execution state possibly modified by the parser */
+  int last_command_exit_value;
+#if defined (ARRAY_VARS)
+  ARRAY *pipestatus;
+#endif
+  sh_builtin_func_t *last_shell_builtin, *this_shell_builtin;
+
+  /* flags state affecting the parser */
+  int expand_aliases;
+  int echo_input_at_read;
+  int need_here_doc;
+  int here_doc_first_line;
+
+  /* structures affecting the parser */
+  REDIRECT *redir_stack[HEREDOC_MAX];
+} sh_parser_state_t;
+
+typedef struct _sh_input_line_state_t {
+  char *input_line;
+  size_t input_line_index;
+  size_t input_line_size;
+  size_t input_line_len;
+#if defined (HANDLE_MULTIBYTE)
+  char *input_property;
+  size_t input_propsize;
+#endif
+} sh_input_line_state_t;
+
+/* Let's try declaring these here. */
+extern char *parser_remaining_input PARAMS((void));
+
+extern sh_parser_state_t *save_parser_state PARAMS((sh_parser_state_t *));
+extern void restore_parser_state PARAMS((sh_parser_state_t *));
+
+extern sh_input_line_state_t *save_input_line_state PARAMS((sh_input_line_state_t *));
+extern void restore_input_line_state PARAMS((sh_input_line_state_t *));
diff --git a/sig.c b/sig.c
new file mode 100644
index 0000000..6964d86
--- /dev/null
+++ b/sig.c
@@ -0,0 +1,809 @@
+/* sig.c - interface for shell signal handlers and signal initialization. */
+
+/* Copyright (C) 1994-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include "bashtypes.h"
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include <signal.h>
+
+#include "bashintl.h"
+
+#include "shell.h"
+#include "execute_cmd.h"
+#if defined (JOB_CONTROL)
+#include "jobs.h"
+#endif /* JOB_CONTROL */
+#include "siglist.h"
+#include "sig.h"
+#include "trap.h"
+
+#include "builtins/common.h"
+#include "builtins/builtext.h"
+
+#if defined (READLINE)
+#  include "bashline.h"
+#  include <readline/readline.h>
+#endif
+
+#if defined (HISTORY)
+#  include "bashhist.h"
+#endif
+
+extern void initialize_siglist ();
+
+#if !defined (JOB_CONTROL)
+extern void initialize_job_signals PARAMS((void));
+#endif
+
+/* Non-zero after SIGINT. */
+volatile sig_atomic_t interrupt_state = 0;
+
+/* Non-zero after SIGWINCH */
+volatile sig_atomic_t sigwinch_received = 0;
+
+/* Non-zero after SIGTERM */
+volatile sig_atomic_t sigterm_received = 0;
+
+/* Set to the value of any terminating signal received. */
+volatile sig_atomic_t terminating_signal = 0;
+
+/* The environment at the top-level R-E loop.  We use this in
+   the case of error return. */
+procenv_t top_level;
+
+#if defined (JOB_CONTROL) || defined (HAVE_POSIX_SIGNALS)
+/* The signal masks that this shell runs with. */
+sigset_t top_level_mask;
+#endif /* JOB_CONTROL */
+
+/* When non-zero, we throw_to_top_level (). */
+int interrupt_immediately = 0;
+
+/* When non-zero, we call the terminating signal handler immediately. */
+int terminate_immediately = 0;
+
+#if defined (SIGWINCH)
+static SigHandler *old_winch = (SigHandler *)SIG_DFL;
+#endif
+
+static void initialize_shell_signals PARAMS((void));
+
+void
+initialize_signals (reinit)
+     int reinit;
+{
+  initialize_shell_signals ();
+  initialize_job_signals ();
+#if !defined (HAVE_SYS_SIGLIST) && !defined (HAVE_UNDER_SYS_SIGLIST) && !defined (HAVE_STRSIGNAL)
+  if (reinit == 0)
+    initialize_siglist ();
+#endif /* !HAVE_SYS_SIGLIST && !HAVE_UNDER_SYS_SIGLIST && !HAVE_STRSIGNAL */
+}
+
+/* A structure describing a signal that terminates the shell if not
+   caught.  The orig_handler member is present so children can reset
+   these signals back to their original handlers. */
+struct termsig {
+     int signum;
+     SigHandler *orig_handler;
+     int orig_flags;
+     int core_dump;
+};
+
+#define NULL_HANDLER (SigHandler *)SIG_DFL
+
+/* The list of signals that would terminate the shell if not caught.
+   We catch them, but just so that we can write the history file,
+   and so forth. */
+static struct termsig terminating_signals[] = {
+#ifdef SIGHUP
+{  SIGHUP, NULL_HANDLER, 0 },
+#endif
+
+#ifdef SIGINT
+{  SIGINT, NULL_HANDLER, 0 },
+#endif
+
+#ifdef SIGILL
+{  SIGILL, NULL_HANDLER, 0, 1},
+#endif
+
+#ifdef SIGTRAP
+{  SIGTRAP, NULL_HANDLER, 0, 1 },
+#endif
+
+#ifdef SIGIOT
+{  SIGIOT, NULL_HANDLER, 0, 1 },
+#endif
+
+#ifdef SIGDANGER
+{  SIGDANGER, NULL_HANDLER, 0 },
+#endif
+
+#ifdef SIGEMT
+{  SIGEMT, NULL_HANDLER, 0 },
+#endif
+
+#ifdef SIGFPE
+{  SIGFPE, NULL_HANDLER, 0, 1 },
+#endif
+
+#ifdef SIGBUS
+{  SIGBUS, NULL_HANDLER, 0, 1 },
+#endif
+
+#ifdef SIGSEGV
+{  SIGSEGV, NULL_HANDLER, 0, 1 },
+#endif
+
+#ifdef SIGSYS
+{  SIGSYS, NULL_HANDLER, 0, 1 },
+#endif
+
+#ifdef SIGPIPE
+{  SIGPIPE, NULL_HANDLER, 0 },
+#endif
+
+#ifdef SIGALRM
+{  SIGALRM, NULL_HANDLER, 0 },
+#endif
+
+#ifdef SIGTERM
+{  SIGTERM, NULL_HANDLER, 0 },
+#endif
+
+/* These don't generate core dumps on anything but Linux, but we're doing
+   this just for Linux anyway. */
+#ifdef SIGXCPU
+{  SIGXCPU, NULL_HANDLER, 0, 1 },
+#endif
+
+#ifdef SIGXFSZ
+{  SIGXFSZ, NULL_HANDLER, 0, 1 },
+#endif
+
+#ifdef SIGVTALRM
+{  SIGVTALRM, NULL_HANDLER, 0 },
+#endif
+
+#if 0
+#ifdef SIGPROF
+{  SIGPROF, NULL_HANDLER, 0 },
+#endif
+#endif
+
+#ifdef SIGLOST
+{  SIGLOST, NULL_HANDLER, 0 },
+#endif
+
+#ifdef SIGUSR1
+{  SIGUSR1, NULL_HANDLER, 0 },
+#endif
+
+#ifdef SIGUSR2
+{  SIGUSR2, NULL_HANDLER, 0 },
+#endif
+};
+
+#define TERMSIGS_LENGTH (sizeof (terminating_signals) / sizeof (struct termsig))
+
+#define XSIG(x) (terminating_signals[x].signum)
+#define XHANDLER(x) (terminating_signals[x].orig_handler)
+#define XSAFLAGS(x) (terminating_signals[x].orig_flags)
+#define XCOREDUMP(x) (terminating_signals[x].core_dump)
+
+static int termsigs_initialized = 0;
+
+/* Initialize signals that will terminate the shell to do some
+   unwind protection.  For non-interactive shells, we only call
+   this when a trap is defined for EXIT (0) or when trap is run
+   to display signal dispositions. */
+void
+initialize_terminating_signals ()
+{
+  register int i;
+#if defined (HAVE_POSIX_SIGNALS)
+  struct sigaction act, oact;
+#endif
+
+  if (termsigs_initialized)
+    return;
+
+  /* The following code is to avoid an expensive call to
+     set_signal_handler () for each terminating_signals.  Fortunately,
+     this is possible in Posix.  Unfortunately, we have to call signal ()
+     on non-Posix systems for each signal in terminating_signals. */
+#if defined (HAVE_POSIX_SIGNALS)
+  act.sa_handler = termsig_sighandler;
+  act.sa_flags = 0;
+  sigemptyset (&act.sa_mask);
+  sigemptyset (&oact.sa_mask);
+  for (i = 0; i < TERMSIGS_LENGTH; i++)
+    sigaddset (&act.sa_mask, XSIG (i));
+  for (i = 0; i < TERMSIGS_LENGTH; i++)
+    {
+      /* If we've already trapped it, don't do anything. */
+      if (signal_is_trapped (XSIG (i)))
+	continue;
+
+      sigaction (XSIG (i), &act, &oact);
+      XHANDLER(i) = oact.sa_handler;
+      XSAFLAGS(i) = oact.sa_flags;
+      /* Don't do anything with signals that are ignored at shell entry
+	 if the shell is not interactive. */
+      /* XXX - should we do this for interactive shells, too? */
+      if (interactive_shell == 0 && XHANDLER (i) == SIG_IGN)
+	{
+	  sigaction (XSIG (i), &oact, &act);
+	  set_signal_hard_ignored (XSIG (i));
+	}
+#if defined (SIGPROF) && !defined (_MINIX)
+      if (XSIG (i) == SIGPROF && XHANDLER (i) != SIG_DFL && XHANDLER (i) != SIG_IGN)
+	sigaction (XSIG (i), &oact, (struct sigaction *)NULL);
+#endif /* SIGPROF && !_MINIX */
+    }
+#else /* !HAVE_POSIX_SIGNALS */
+
+  for (i = 0; i < TERMSIGS_LENGTH; i++)
+    {
+      /* If we've already trapped it, don't do anything. */
+      if (signal_is_trapped (XSIG (i)))
+	continue;
+
+      XHANDLER(i) = signal (XSIG (i), termsig_sighandler);
+      XSAFLAGS(i) = 0;
+      /* Don't do anything with signals that are ignored at shell entry
+	 if the shell is not interactive. */
+      /* XXX - should we do this for interactive shells, too? */
+      if (interactive_shell == 0 && XHANDLER (i) == SIG_IGN)
+	{
+	  signal (XSIG (i), SIG_IGN);
+	  set_signal_hard_ignored (XSIG (i));
+	}
+#ifdef SIGPROF
+      if (XSIG (i) == SIGPROF && XHANDLER (i) != SIG_DFL && XHANDLER (i) != SIG_IGN)
+	signal (XSIG (i), XHANDLER (i));
+#endif
+    }
+
+#endif /* !HAVE_POSIX_SIGNALS */
+
+  termsigs_initialized = 1;
+}
+
+static void
+initialize_shell_signals ()
+{
+  if (interactive)
+    initialize_terminating_signals ();
+
+#if defined (JOB_CONTROL) || defined (HAVE_POSIX_SIGNALS)
+  /* All shells use the signal mask they inherit, and pass it along
+     to child processes.  Children will never block SIGCHLD, though. */
+  sigemptyset (&top_level_mask);
+  sigprocmask (SIG_BLOCK, (sigset_t *)NULL, &top_level_mask);
+#  if defined (SIGCHLD)
+  if (sigismember (&top_level_mask, SIGCHLD))
+    {
+      sigdelset (&top_level_mask, SIGCHLD);
+      sigprocmask (SIG_SETMASK, &top_level_mask, (sigset_t *)NULL);
+    }
+#  endif
+#endif /* JOB_CONTROL || HAVE_POSIX_SIGNALS */
+
+  /* And, some signals that are specifically ignored by the shell. */
+  set_signal_handler (SIGQUIT, SIG_IGN);
+
+  if (interactive)
+    {
+      set_signal_handler (SIGINT, sigint_sighandler);
+      get_original_signal (SIGTERM);
+      set_signal_handler (SIGTERM, SIG_IGN);
+      set_sigwinch_handler ();
+    }
+}
+
+void
+reset_terminating_signals ()
+{
+  register int i;
+#if defined (HAVE_POSIX_SIGNALS)
+  struct sigaction act;
+#endif
+
+  if (termsigs_initialized == 0)
+    return;
+
+#if defined (HAVE_POSIX_SIGNALS)
+  act.sa_flags = 0;
+  sigemptyset (&act.sa_mask);
+  for (i = 0; i < TERMSIGS_LENGTH; i++)
+    {
+      /* Skip a signal if it's trapped or handled specially, because the
+	 trap code will restore the correct value. */
+      if (signal_is_trapped (XSIG (i)) || signal_is_special (XSIG (i)))
+	continue;
+
+      act.sa_handler = XHANDLER (i);
+      act.sa_flags = XSAFLAGS (i);
+      sigaction (XSIG (i), &act, (struct sigaction *) NULL);
+    }
+#else /* !HAVE_POSIX_SIGNALS */
+  for (i = 0; i < TERMSIGS_LENGTH; i++)
+    {
+      if (signal_is_trapped (XSIG (i)) || signal_is_special (XSIG (i)))
+	continue;
+
+      signal (XSIG (i), XHANDLER (i));
+    }
+#endif /* !HAVE_POSIX_SIGNALS */
+
+  termsigs_initialized = 0;
+}
+#undef XHANDLER
+
+/* Run some of the cleanups that should be performed when we run
+   jump_to_top_level from a builtin command context.  XXX - might want to
+   also call reset_parser here. */
+void
+top_level_cleanup ()
+{
+  /* Clean up string parser environment. */
+  while (parse_and_execute_level)
+    parse_and_execute_cleanup (-1);
+
+#if defined (PROCESS_SUBSTITUTION)
+  unlink_fifo_list ();
+#endif /* PROCESS_SUBSTITUTION */
+
+  run_unwind_protects ();
+  loop_level = continuing = breaking = funcnest = 0;
+  executing_list = comsub_ignore_return = return_catch_flag = wait_intr_flag = 0;
+}
+
+/* What to do when we've been interrupted, and it is safe to handle it. */
+void
+throw_to_top_level ()
+{
+  int print_newline = 0;
+
+  if (interrupt_state)
+    {
+      if (last_command_exit_value < 128)
+	last_command_exit_value = 128 + SIGINT;
+      set_pipestatus_from_exit (last_command_exit_value);
+      print_newline = 1;
+      DELINTERRUPT;
+    }
+
+  if (interrupt_state)
+    return;
+
+  last_command_exit_signal = (last_command_exit_value > 128) ?
+				(last_command_exit_value - 128) : 0;
+  last_command_exit_value |= 128;
+  set_pipestatus_from_exit (last_command_exit_value);
+
+  /* Run any traps set on SIGINT, mostly for interactive shells */
+  if (signal_is_trapped (SIGINT) && signal_is_pending (SIGINT))
+    run_interrupt_trap (1);
+
+  /* Clean up string parser environment. */
+  while (parse_and_execute_level)
+    parse_and_execute_cleanup (-1);
+
+  if (running_trap > 0)
+    {
+      run_trap_cleanup (running_trap - 1);
+      running_trap = 0;
+    }
+
+#if defined (JOB_CONTROL)
+  give_terminal_to (shell_pgrp, 0);
+#endif /* JOB_CONTROL */
+
+  /* This needs to stay because jobs.c:make_child() uses it without resetting
+     the signal mask. */
+  restore_sigmask ();  
+
+  reset_parser ();
+
+#if defined (READLINE)
+  if (interactive)
+    bashline_reset ();
+#endif /* READLINE */
+
+#if defined (PROCESS_SUBSTITUTION)
+  unlink_fifo_list ();
+#endif /* PROCESS_SUBSTITUTION */
+
+  run_unwind_protects ();
+  loop_level = continuing = breaking = funcnest = 0;
+  executing_list = comsub_ignore_return = return_catch_flag = wait_intr_flag = 0;
+
+  if (interactive && print_newline)
+    {
+      fflush (stdout);
+      fprintf (stderr, "\n");
+      fflush (stderr);
+    }
+
+  /* An interrupted `wait' command in a script does not exit the script. */
+  if (interactive || (interactive_shell && !shell_initialized) ||
+      (print_newline && signal_is_trapped (SIGINT)))
+    jump_to_top_level (DISCARD);
+  else
+    jump_to_top_level (EXITPROG);
+}
+
+/* This is just here to isolate the longjmp calls. */
+void
+jump_to_top_level (value)
+     int value;
+{
+  sh_longjmp (top_level, value);
+}
+
+void
+restore_sigmask ()
+{
+#if defined (JOB_CONTROL) || defined (HAVE_POSIX_SIGNALS)
+  sigprocmask (SIG_SETMASK, &top_level_mask, (sigset_t *)NULL);
+#endif
+}
+
+sighandler
+termsig_sighandler (sig)
+     int sig;
+{
+  /* If we get called twice with the same signal before handling it,
+     terminate right away. */
+  if (
+#ifdef SIGHUP
+    sig != SIGHUP &&
+#endif
+#ifdef SIGINT
+    sig != SIGINT &&
+#endif
+#ifdef SIGDANGER
+    sig != SIGDANGER &&
+#endif
+#ifdef SIGPIPE
+    sig != SIGPIPE &&
+#endif
+#ifdef SIGALRM
+    sig != SIGALRM &&
+#endif
+#ifdef SIGTERM
+    sig != SIGTERM &&
+#endif
+#ifdef SIGXCPU
+    sig != SIGXCPU &&
+#endif
+#ifdef SIGXFSZ
+    sig != SIGXFSZ &&
+#endif
+#ifdef SIGVTALRM
+    sig != SIGVTALRM &&
+#endif
+#ifdef SIGLOST
+    sig != SIGLOST &&
+#endif
+#ifdef SIGUSR1
+    sig != SIGUSR1 &&
+#endif
+#ifdef SIGUSR2
+   sig != SIGUSR2 &&
+#endif
+   sig == terminating_signal)
+    terminate_immediately = 1;
+
+  terminating_signal = sig;
+
+  if (terminate_immediately)
+    {
+#if defined (HISTORY)
+      /* XXX - will inhibit history file being written */
+#  if defined (READLINE)
+      if (interactive_shell == 0 || interactive == 0 || (sig != SIGHUP && sig != SIGTERM) || no_line_editing || (RL_ISSTATE (RL_STATE_READCMD) == 0))
+#  endif
+        history_lines_this_session = 0;
+#endif
+      terminate_immediately = 0;
+      termsig_handler (sig);
+    }
+
+#if defined (READLINE)
+  /* Set the event hook so readline will call it after the signal handlers
+     finish executing, so if this interrupted character input we can get
+     quick response.  If readline is active or has modified the terminal we
+     need to set this no matter what the signal is, though the check for
+     RL_STATE_TERMPREPPED is possibly redundant. */
+  if (RL_ISSTATE (RL_STATE_SIGHANDLER) || RL_ISSTATE (RL_STATE_TERMPREPPED))
+    bashline_set_event_hook ();
+#endif
+
+  SIGRETURN (0);
+}
+
+void
+termsig_handler (sig)
+     int sig;
+{
+  static int handling_termsig = 0;
+  int i, core;
+  sigset_t mask;
+
+  /* Simple semaphore to keep this function from being executed multiple
+     times.  Since we no longer are running as a signal handler, we don't
+     block multiple occurrences of the terminating signals while running. */
+  if (handling_termsig)
+    return;
+  handling_termsig = 1;
+  terminating_signal = 0;	/* keep macro from re-testing true. */
+
+  /* I don't believe this condition ever tests true. */
+  if (sig == SIGINT && signal_is_trapped (SIGINT))
+    run_interrupt_trap (0);
+
+#if defined (HISTORY)
+  /* If we don't do something like this, the history will not be saved when
+     an interactive shell is running in a terminal window that gets closed
+     with the `close' button.  We can't test for RL_STATE_READCMD because
+     readline no longer handles SIGTERM synchronously.  */
+  if (interactive_shell && interactive && (sig == SIGHUP || sig == SIGTERM) && remember_on_history)
+    maybe_save_shell_history ();
+#endif /* HISTORY */
+
+  if (this_shell_builtin == read_builtin)
+    read_tty_cleanup ();
+
+#if defined (JOB_CONTROL)
+  if (sig == SIGHUP && (interactive || (subshell_environment & (SUBSHELL_COMSUB|SUBSHELL_PROCSUB))))
+    hangup_all_jobs ();
+
+  if ((subshell_environment & (SUBSHELL_COMSUB|SUBSHELL_PROCSUB)) == 0)
+    end_job_control ();
+#endif /* JOB_CONTROL */
+
+#if defined (PROCESS_SUBSTITUTION)
+  unlink_all_fifos ();
+#  if defined (JOB_CONTROL)
+  procsub_clear ();
+#  endif
+#endif /* PROCESS_SUBSTITUTION */
+
+  /* Reset execution context */
+  loop_level = continuing = breaking = funcnest = 0;
+  executing_list = comsub_ignore_return = return_catch_flag = wait_intr_flag = 0;
+
+  run_exit_trap ();	/* XXX - run exit trap possibly in signal context? */
+
+  /* We don't change the set of blocked signals. If a user starts the shell
+     with a terminating signal blocked, we won't get here (and if by some
+     magic chance we do, we'll exit below). What we do is to restore the
+     top-level signal mask, in case this is called from a terminating signal
+     handler context, in which case the signal is blocked. */
+  restore_sigmask ();
+
+  set_signal_handler (sig, SIG_DFL);
+
+  kill (getpid (), sig);
+
+  if (dollar_dollar_pid != 1)
+    exit (128+sig);		/* just in case the kill fails? */
+
+  /* We get here only under extraordinary circumstances. */
+
+  /* We are PID 1, and the kill above failed to kill the process. We assume
+     this means that we are running as an init process in a pid namespace
+     on Linux. In this case, we can't send ourselves a fatal signal, so we
+     determine whether or not we should have generated a core dump with the
+     kill call and attempt to trick the kernel into generating one if
+     necessary. */
+  sigprocmask (SIG_SETMASK, (sigset_t *)NULL, &mask);
+  for (i = core = 0; i < TERMSIGS_LENGTH; i++)
+    {
+      set_signal_handler (XSIG (i), SIG_DFL);
+      sigdelset (&mask, XSIG (i));
+      if (sig == XSIG (i))
+	core = XCOREDUMP (i);
+    }
+  sigprocmask (SIG_SETMASK, &mask, (sigset_t *)NULL);
+
+  if (core)
+    *((volatile unsigned long *) NULL) = 0xdead0000 + sig;	/* SIGSEGV */
+
+  exit (128+sig);
+}
+#undef XSIG
+
+/* What we really do when SIGINT occurs. */
+sighandler
+sigint_sighandler (sig)
+     int sig;
+{
+#if defined (MUST_REINSTALL_SIGHANDLERS)
+  signal (sig, sigint_sighandler);
+#endif
+
+  /* interrupt_state needs to be set for the stack of interrupts to work
+     right.  Should it be set unconditionally? */
+  if (interrupt_state == 0)
+    ADDINTERRUPT;
+
+  /* We will get here in interactive shells with job control active; allow
+     an interactive wait to be interrupted.  wait_intr_flag is only set during
+     the execution of the wait builtin and when wait_intr_buf is valid. */
+  if (wait_intr_flag)
+    {
+      last_command_exit_value = 128 + sig;
+      set_pipestatus_from_exit (last_command_exit_value);
+      wait_signal_received = sig;
+      SIGRETURN (0);
+    }
+
+  /* In interactive shells, we will get here instead of trap_handler() so
+     note that we have a trap pending. */
+  if (signal_is_trapped (sig))
+    set_trap_state (sig);
+
+  /* This is no longer used, but this code block remains as a reminder. */
+  if (interrupt_immediately)
+    {
+      interrupt_immediately = 0;
+      set_exit_status (128 + sig);
+      throw_to_top_level ();
+    }
+#if defined (READLINE)
+  /* Set the event hook so readline will call it after the signal handlers
+     finish executing, so if this interrupted character input we can get
+     quick response. */
+  else if (RL_ISSTATE (RL_STATE_SIGHANDLER))
+    bashline_set_event_hook ();
+#endif
+
+  SIGRETURN (0);
+}
+
+#if defined (SIGWINCH)
+sighandler
+sigwinch_sighandler (sig)
+     int sig;
+{
+#if defined (MUST_REINSTALL_SIGHANDLERS)
+  set_signal_handler (SIGWINCH, sigwinch_sighandler);
+#endif /* MUST_REINSTALL_SIGHANDLERS */
+  sigwinch_received = 1;
+  SIGRETURN (0);
+}
+#endif /* SIGWINCH */
+
+void
+set_sigwinch_handler ()
+{
+#if defined (SIGWINCH)
+ old_winch = set_signal_handler (SIGWINCH, sigwinch_sighandler);
+#endif
+}
+
+void
+unset_sigwinch_handler ()
+{
+#if defined (SIGWINCH)
+  set_signal_handler (SIGWINCH, old_winch);
+#endif
+}
+
+sighandler
+sigterm_sighandler (sig)
+     int sig;
+{
+  sigterm_received = 1;		/* XXX - counter? */
+  SIGRETURN (0);
+}
+
+/* Signal functions used by the rest of the code. */
+#if !defined (HAVE_POSIX_SIGNALS)
+
+/* Perform OPERATION on NEWSET, perhaps leaving information in OLDSET. */
+sigprocmask (operation, newset, oldset)
+     int operation, *newset, *oldset;
+{
+  int old, new;
+
+  if (newset)
+    new = *newset;
+  else
+    new = 0;
+
+  switch (operation)
+    {
+    case SIG_BLOCK:
+      old = sigblock (new);
+      break;
+
+    case SIG_SETMASK:
+      old = sigsetmask (new);
+      break;
+
+    default:
+      internal_error (_("sigprocmask: %d: invalid operation"), operation);
+    }
+
+  if (oldset)
+    *oldset = old;
+}
+
+#else
+
+#if !defined (SA_INTERRUPT)
+#  define SA_INTERRUPT 0
+#endif
+
+#if !defined (SA_RESTART)
+#  define SA_RESTART 0
+#endif
+
+SigHandler *
+set_signal_handler (sig, handler)
+     int sig;
+     SigHandler *handler;
+{
+  struct sigaction act, oact;
+
+  act.sa_handler = handler;
+  act.sa_flags = 0;
+
+  /* XXX - bash-4.2 */
+  /* We don't want a child death to interrupt interruptible system calls, even
+     if we take the time to reap children */
+#if defined (SIGCHLD)
+  if (sig == SIGCHLD)
+    act.sa_flags |= SA_RESTART;		/* XXX */
+#endif
+  /* Let's see if we can keep SIGWINCH from interrupting interruptible system
+     calls, like open(2)/read(2)/write(2) */
+#if defined (SIGWINCH)
+  if (sig == SIGWINCH)
+    act.sa_flags |= SA_RESTART;		/* XXX */
+#endif
+  /* If we're installing a SIGTERM handler for interactive shells, we want
+     it to be as close to SIG_IGN as possible. */
+  if (sig == SIGTERM && handler == sigterm_sighandler)
+    act.sa_flags |= SA_RESTART;		/* XXX */
+
+  sigemptyset (&act.sa_mask);
+  sigemptyset (&oact.sa_mask);
+  if (sigaction (sig, &act, &oact) == 0)
+    return (oact.sa_handler);
+  else
+    return (SIG_DFL);
+}
+#endif /* HAVE_POSIX_SIGNALS */
diff --git a/sig.h b/sig.h
new file mode 100644
index 0000000..a564e3c
--- /dev/null
+++ b/sig.h
@@ -0,0 +1,140 @@
+/* sig.h -- header file for signal handler definitions. */
+
+/* Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* Make sure that this is included *after* config.h! */
+
+#if !defined (_SIG_H_)
+#  define _SIG_H_
+
+#include "stdc.h"
+
+#include <signal.h>		/* for sig_atomic_t */
+
+#if !defined (SIGABRT) && defined (SIGIOT)
+#  define SIGABRT SIGIOT
+#endif
+
+#define sighandler RETSIGTYPE
+typedef RETSIGTYPE SigHandler PARAMS((int));
+
+#if defined (VOID_SIGHANDLER)
+#  define SIGRETURN(n)	return
+#else
+#  define SIGRETURN(n)	return(n)
+#endif /* !VOID_SIGHANDLER */
+
+/* Here is a definition for set_signal_handler () which simply expands to
+   a call to signal () for non-Posix systems.  The code for set_signal_handler
+   in the Posix case resides in general.c. */
+#if !defined (HAVE_POSIX_SIGNALS)
+#  define set_signal_handler(sig, handler) (SigHandler *)signal (sig, handler)
+#else
+extern SigHandler *set_signal_handler PARAMS((int, SigHandler *));	/* in sig.c */
+#endif /* _POSIX_VERSION */
+
+#if !defined (SIGCHLD) && defined (SIGCLD)
+#  define SIGCHLD SIGCLD
+#endif
+
+#if !defined (HAVE_POSIX_SIGNALS) && !defined (sigmask)
+#  define sigmask(x) (1 << ((x)-1))
+#endif /* !HAVE_POSIX_SIGNALS && !sigmask */
+
+#if !defined (HAVE_POSIX_SIGNALS)
+#  if !defined (SIG_BLOCK)
+#    define SIG_BLOCK 2
+#    define SIG_SETMASK 3
+#  endif /* SIG_BLOCK */
+
+/* sigset_t defined in config.h */
+
+/* Make sure there is nothing inside the signal set. */
+#  define sigemptyset(set) (*(set) = 0)
+
+/* Initialize the signal set to hold all signals. */
+#  define sigfillset(set) (*set) = sigmask (NSIG) - 1
+
+/* Add SIG to the contents of SET. */
+#  define sigaddset(set, sig) *(set) |= sigmask (sig)
+
+/* Delete SIG from signal set SET. */
+#  define sigdelset(set, sig) *(set) &= ~sigmask (sig)
+
+/* Is SIG a member of the signal set SET? */
+#  define sigismember(set, sig) ((*(set) & sigmask (sig)) != 0)
+
+/* Suspend the process until the reception of one of the signals
+   not present in SET. */
+#  define sigsuspend(set) sigpause (*(set))
+#endif /* !HAVE_POSIX_SIGNALS */
+
+/* These definitions are used both in POSIX and non-POSIX implementations. */
+
+#define BLOCK_SIGNAL(sig, nvar, ovar) \
+do { \
+  sigemptyset (&nvar); \
+  sigaddset (&nvar, sig); \
+  sigemptyset (&ovar); \
+  sigprocmask (SIG_BLOCK, &nvar, &ovar); \
+} while (0)
+
+#define UNBLOCK_SIGNAL(ovar) sigprocmask (SIG_SETMASK, &ovar, (sigset_t *) NULL)
+
+#if defined (HAVE_POSIX_SIGNALS)
+#  define BLOCK_CHILD(nvar, ovar) BLOCK_SIGNAL (SIGCHLD, nvar, ovar)
+#  define UNBLOCK_CHILD(ovar) UNBLOCK_SIGNAL(ovar)
+#else /* !HAVE_POSIX_SIGNALS */
+#  define BLOCK_CHILD(nvar, ovar) ovar = sigblock (sigmask (SIGCHLD))
+#  define UNBLOCK_CHILD(ovar) sigsetmask (ovar)
+#endif /* !HAVE_POSIX_SIGNALS */
+
+/* Extern variables */
+extern volatile sig_atomic_t sigwinch_received;
+extern volatile sig_atomic_t sigterm_received;
+
+extern int interrupt_immediately;	/* no longer used */
+extern int terminate_immediately;
+
+/* Functions from sig.c. */
+extern sighandler termsig_sighandler PARAMS((int));
+extern void termsig_handler PARAMS((int));
+extern sighandler sigint_sighandler PARAMS((int));
+extern void initialize_signals PARAMS((int));
+extern void initialize_terminating_signals PARAMS((void));
+extern void reset_terminating_signals PARAMS((void));
+extern void top_level_cleanup PARAMS((void));
+extern void throw_to_top_level PARAMS((void));
+extern void jump_to_top_level PARAMS((int)) __attribute__((__noreturn__));
+extern void restore_sigmask PARAMS((void));
+
+extern sighandler sigwinch_sighandler PARAMS((int));
+extern void set_sigwinch_handler PARAMS((void));
+extern void unset_sigwinch_handler PARAMS((void));
+
+extern sighandler sigterm_sighandler PARAMS((int));
+
+/* Functions defined in trap.c. */
+extern SigHandler *set_sigint_handler PARAMS((void));
+extern SigHandler *trap_to_sighandler PARAMS((int));
+extern sighandler trap_handler PARAMS((int));
+
+extern int block_trapped_signals PARAMS((sigset_t *, sigset_t *));
+extern int unblock_trapped_signals PARAMS((sigset_t *));
+#endif /* _SIG_H_ */
diff --git a/siglist.c b/siglist.c
new file mode 100644
index 0000000..d8361dd
--- /dev/null
+++ b/siglist.c
@@ -0,0 +1,228 @@
+/* siglist.c -- signal list for those machines that don't have one. */
+
+/* Copyright (C) 1989-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#if !defined (HAVE_SYS_SIGLIST) && !defined (HAVE_UNDER_SYS_SIGLIST) && !defined (HAVE_STRSIGNAL)
+
+#include <stdio.h>
+#include "general.h"
+#include <signal.h>
+
+#include "siglist.h"
+
+#if !defined (NSIG)
+#  include "trap.h"
+#endif
+
+#include "bashintl.h"
+
+char *sys_siglist[NSIG];
+
+void
+initialize_siglist ()
+{
+  register int i;
+
+  for (i = 0; i < NSIG; i++)
+    sys_siglist[i] = (char *)0x0;
+
+  sys_siglist[0] = _("Bogus signal");
+
+#if defined (SIGHUP)
+  sys_siglist[SIGHUP] = _("Hangup");
+#endif
+
+#if defined (SIGINT)
+  sys_siglist[SIGINT] = _("Interrupt");
+#endif
+
+#if defined (SIGQUIT)
+  sys_siglist[SIGQUIT] = _("Quit");
+#endif
+
+#if defined (SIGILL)
+  sys_siglist[SIGILL] = _("Illegal instruction");
+#endif
+
+#if defined (SIGTRAP)
+  sys_siglist[SIGTRAP] = _("BPT trace/trap");
+#endif
+
+#if defined (SIGIOT) && !defined (SIGABRT)
+#define SIGABRT SIGIOT
+#endif
+
+#if defined (SIGABRT)
+  sys_siglist[SIGABRT] = _("ABORT instruction");
+#endif
+
+#if defined (SIGEMT)
+  sys_siglist[SIGEMT] = _("EMT instruction");
+#endif
+
+#if defined (SIGFPE)
+  sys_siglist[SIGFPE] = _("Floating point exception");
+#endif
+
+#if defined (SIGKILL)
+  sys_siglist[SIGKILL] = _("Killed");
+#endif
+
+#if defined (SIGBUS)
+  sys_siglist[SIGBUS] = _("Bus error");
+#endif
+
+#if defined (SIGSEGV)
+  sys_siglist[SIGSEGV] = _("Segmentation fault");
+#endif
+
+#if defined (SIGSYS)
+  sys_siglist[SIGSYS] = _("Bad system call");
+#endif
+
+#if defined (SIGPIPE)
+  sys_siglist[SIGPIPE] = _("Broken pipe");
+#endif
+
+#if defined (SIGALRM)
+  sys_siglist[SIGALRM] = _("Alarm clock");
+#endif
+
+#if defined (SIGTERM)
+  sys_siglist[SIGTERM] = _("Terminated");
+#endif
+
+#if defined (SIGURG)
+  sys_siglist[SIGURG] = _("Urgent IO condition");
+#endif
+
+#if defined (SIGSTOP)
+  sys_siglist[SIGSTOP] = _("Stopped (signal)");
+#endif
+
+#if defined (SIGTSTP)
+  sys_siglist[SIGTSTP] = _("Stopped");
+#endif
+
+#if defined (SIGCONT)
+  sys_siglist[SIGCONT] = _("Continue");
+#endif
+
+#if !defined (SIGCHLD) && defined (SIGCLD)
+#define SIGCHLD SIGCLD
+#endif
+
+#if defined (SIGCHLD)
+  sys_siglist[SIGCHLD] = _("Child death or stop");
+#endif
+
+#if defined (SIGTTIN)
+  sys_siglist[SIGTTIN] = _("Stopped (tty input)");
+#endif
+
+#if defined (SIGTTOU)
+  sys_siglist[SIGTTOU] = _("Stopped (tty output)");
+#endif
+
+#if defined (SIGIO)
+  sys_siglist[SIGIO] = _("I/O ready");
+#endif
+
+#if defined (SIGXCPU)
+  sys_siglist[SIGXCPU] = _("CPU limit");
+#endif
+
+#if defined (SIGXFSZ)
+  sys_siglist[SIGXFSZ] = _("File limit");
+#endif
+
+#if defined (SIGVTALRM)
+  sys_siglist[SIGVTALRM] = _("Alarm (virtual)");
+#endif
+
+#if defined (SIGPROF)
+  sys_siglist[SIGPROF] = _("Alarm (profile)");
+#endif
+
+#if defined (SIGWINCH)
+  sys_siglist[SIGWINCH] = _("Window changed");
+#endif
+
+#if defined (SIGLOST)
+  sys_siglist[SIGLOST] = _("Record lock");
+#endif
+
+#if defined (SIGUSR1)
+  sys_siglist[SIGUSR1] = _("User signal 1");
+#endif
+
+#if defined (SIGUSR2)
+  sys_siglist[SIGUSR2] = _("User signal 2");
+#endif
+
+#if defined (SIGMSG)
+  sys_siglist[SIGMSG] = _("HFT input data pending");
+#endif
+
+#if defined (SIGPWR)
+  sys_siglist[SIGPWR] = _("power failure imminent");
+#endif
+
+#if defined (SIGDANGER)
+  sys_siglist[SIGDANGER] = _("system crash imminent");
+#endif
+
+#if defined (SIGMIGRATE)
+  sys_siglist[SIGMIGRATE] = _("migrate process to another CPU");
+#endif
+
+#if defined (SIGPRE)
+  sys_siglist[SIGPRE] = _("programming error");
+#endif
+
+#if defined (SIGGRANT)
+  sys_siglist[SIGGRANT] = _("HFT monitor mode granted");
+#endif
+
+#if defined (SIGRETRACT)
+  sys_siglist[SIGRETRACT] = _("HFT monitor mode retracted");
+#endif
+
+#if defined (SIGSOUND)
+  sys_siglist[SIGSOUND] = _("HFT sound sequence has completed");
+#endif
+
+#if defined (SIGINFO)
+  sys_siglist[SIGINFO] = _("Information request");
+#endif
+
+  for (i = 0; i < NSIG; i++)
+    {
+      if (!sys_siglist[i])
+	{
+	  sys_siglist[i] =
+	    (char *)xmalloc (INT_STRLEN_BOUND (int) + 1 + strlen (_("Unknown Signal #%d")));
+
+	  sprintf (sys_siglist[i], _("Unknown Signal #%d"), i);
+	}
+    }
+}
+#endif /* !HAVE_SYS_SIGLIST && !HAVE_UNDER_SYS_SIGLIST && !HAVE_STRSIGNAL */
diff --git a/siglist.h b/siglist.h
new file mode 100644
index 0000000..321c20c
--- /dev/null
+++ b/siglist.h
@@ -0,0 +1,44 @@
+/* siglist.h -- encapsulate various definitions for sys_siglist */
+
+/* Copyright (C) 1993, 2001, 2005, 2008-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_SIGLIST_H_)
+#define _SIGLIST_H_
+
+#if !defined (SYS_SIGLIST_DECLARED) && !defined (HAVE_STRSIGNAL)
+
+#if defined (HAVE_UNDER_SYS_SIGLIST) && !defined (HAVE_SYS_SIGLIST) && !defined (sys_siglist)
+#  define sys_siglist _sys_siglist
+#endif /* HAVE_UNDER_SYS_SIGLIST && !HAVE_SYS_SIGLIST && !sys_siglist */
+
+#if !defined (sys_siglist)
+extern char *sys_siglist[];
+#endif /* !sys_siglist */
+
+#endif /* !SYS_SIGLIST_DECLARED && !HAVE_STRSIGNAL */
+
+#if !defined (strsignal) && !defined (HAVE_STRSIGNAL)
+#  define strsignal(sig) (char *)sys_siglist[sig]
+#endif /* !strsignal && !HAVE_STRSIGNAL */
+
+#if !defined (strsignal) && !HAVE_DECL_STRSIGNAL
+extern char *strsignal PARAMS((int));
+#endif
+
+#endif /* _SIGLIST_H */
diff --git a/stringlib.c b/stringlib.c
new file mode 100644
index 0000000..745e536
--- /dev/null
+++ b/stringlib.c
@@ -0,0 +1,287 @@
+/* stringlib.c - Miscellaneous string functions. */
+
+/* Copyright (C) 1996-2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include "bashtypes.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "bashansi.h"
+#include <stdio.h>
+#include "chartypes.h"
+
+#include "shell.h"
+#include "pathexp.h"
+
+#include <glob/glob.h>
+
+#if defined (EXTENDED_GLOB)
+#  include <glob/strmatch.h>
+#endif
+
+/* **************************************************************** */
+/*								    */
+/*		Functions to manage arrays of strings		    */
+/*								    */
+/* **************************************************************** */
+
+/* Find STRING in ALIST, a list of string key/int value pairs.  If FLAGS
+   is 1, STRING is treated as a pattern and matched using strmatch. */
+int
+find_string_in_alist (string, alist, flags)
+     char *string;
+     STRING_INT_ALIST *alist;
+     int flags;
+{
+  register int i;
+  int r;
+
+  for (i = r = 0; alist[i].word; i++)
+    {
+#if defined (EXTENDED_GLOB)
+      if (flags)
+	r = strmatch (alist[i].word, string, FNM_EXTMATCH) != FNM_NOMATCH;
+      else
+#endif
+	r = STREQ (string, alist[i].word);
+
+      if (r)
+	return (alist[i].token);
+    }
+  return -1;
+}
+
+/* Find TOKEN in ALIST, a list of string/int value pairs.  Return the
+   corresponding string.  Allocates memory for the returned
+   string.  FLAGS is currently ignored, but reserved. */
+char *
+find_token_in_alist (token, alist, flags)
+     int token;
+     STRING_INT_ALIST *alist;
+     int flags;
+{
+  register int i;
+
+  for (i = 0; alist[i].word; i++)
+    {
+      if (alist[i].token == token)
+        return (savestring (alist[i].word));
+    }
+  return ((char *)NULL);
+}
+
+int
+find_index_in_alist (string, alist, flags)
+     char *string;
+     STRING_INT_ALIST *alist;
+     int flags;
+{
+  register int i;
+  int r;
+
+  for (i = r = 0; alist[i].word; i++)
+    {
+#if defined (EXTENDED_GLOB)
+      if (flags)
+	r = strmatch (alist[i].word, string, FNM_EXTMATCH) != FNM_NOMATCH;
+      else
+#endif
+	r = STREQ (string, alist[i].word);
+
+      if (r)
+	return (i);
+    }
+
+  return -1;
+}
+
+/* **************************************************************** */
+/*								    */
+/*		    String Management Functions			    */
+/*								    */
+/* **************************************************************** */
+
+/* Cons a new string from STRING starting at START and ending at END,
+   not including END. */
+char *
+substring (string, start, end)
+     const char *string;
+     int start, end;
+{
+  register int len;
+  register char *result;
+
+  len = end - start;
+  result = (char *)xmalloc (len + 1);
+  memcpy (result, string + start, len);
+  result[len] = '\0';
+  return (result);
+}
+
+/* Replace occurrences of PAT with REP in STRING.  If GLOBAL is non-zero,
+   replace all occurrences, otherwise replace only the first.
+   This returns a new string; the caller should free it. */
+char *
+strsub (string, pat, rep, global)
+     char *string, *pat, *rep;
+     int global;
+{
+  int patlen, replen, templen, tempsize, repl, i;
+  char *temp, *r;
+
+  patlen = strlen (pat);
+  replen = strlen (rep);
+  for (temp = (char *)NULL, i = templen = tempsize = 0, repl = 1; string[i]; )
+    {
+      if (repl && STREQN (string + i, pat, patlen))
+	{
+	  if (replen)
+	    RESIZE_MALLOCED_BUFFER (temp, templen, replen, tempsize, (replen * 2));
+
+	  for (r = rep; *r; )	/* can rep == "" */
+	    temp[templen++] = *r++;
+
+	  i += patlen ? patlen : 1;	/* avoid infinite recursion */
+	  repl = global != 0;
+	}
+      else
+	{
+	  RESIZE_MALLOCED_BUFFER (temp, templen, 1, tempsize, 16);
+	  temp[templen++] = string[i++];
+	}
+    }
+  if (temp)
+    temp[templen] = 0;
+  else
+    temp = savestring (string);
+  return (temp);
+}
+
+/* Replace all instances of C in STRING with TEXT.  TEXT may be empty or
+   NULL.  If DO_GLOB is non-zero, we quote the replacement text for
+   globbing.  Backslash may be used to quote C. */
+char *
+strcreplace (string, c, text, do_glob)
+     char *string;
+     int c;
+     const char *text;
+     int do_glob;
+{
+  char *ret, *p, *r, *t;
+  int len, rlen, ind, tlen;
+
+  len = STRLEN (text);
+  rlen = len + strlen (string) + 2;
+  ret = (char *)xmalloc (rlen);
+
+  for (p = string, r = ret; p && *p; )
+    {
+      if (*p == c)
+	{
+	  if (len)
+	    {
+	      ind = r - ret;
+	      if (do_glob && (glob_pattern_p (text) || strchr (text, '\\')))
+		{
+		  t = quote_globbing_chars (text);
+		  tlen = strlen (t);
+		  RESIZE_MALLOCED_BUFFER (ret, ind, tlen, rlen, rlen);
+		  r = ret + ind;	/* in case reallocated */
+		  strcpy (r, t);
+		  r += tlen;
+		  free (t);
+		}
+	      else
+		{
+		  RESIZE_MALLOCED_BUFFER (ret, ind, len, rlen, rlen);
+		  r = ret + ind;	/* in case reallocated */
+		  strcpy (r, text);
+		  r += len;
+		}
+	    }
+	  p++;
+	  continue;
+	}
+
+      if (*p == '\\' && p[1] == c)
+	p++;
+
+      ind = r - ret;
+      RESIZE_MALLOCED_BUFFER (ret, ind, 2, rlen, rlen);
+      r = ret + ind;			/* in case reallocated */
+      *r++ = *p++;
+    }
+  *r = '\0';
+
+  return ret;
+}
+
+#ifdef INCLUDE_UNUSED
+/* Remove all leading whitespace from STRING.  This includes
+   newlines.  STRING should be terminated with a zero. */
+void
+strip_leading (string)
+     char *string;
+{
+  char *start = string;
+
+  while (*string && (whitespace (*string) || *string == '\n'))
+    string++;
+
+  if (string != start)
+    {
+      int len = strlen (string);
+      FASTCOPY (string, start, len);
+      start[len] = '\0';
+    }
+}
+#endif
+
+/* Remove all trailing whitespace from STRING.  This includes
+   newlines.  If NEWLINES_ONLY is non-zero, only trailing newlines
+   are removed.  STRING should be terminated with a zero. */
+void
+strip_trailing (string, len, newlines_only)
+     char *string;
+     int len;
+     int newlines_only;
+{
+  while (len >= 0)
+    {
+      if ((newlines_only && string[len] == '\n') ||
+	  (!newlines_only && whitespace (string[len])))
+	len--;
+      else
+	break;
+    }
+  string[len + 1] = '\0';
+}
+
+/* A wrapper for bcopy that can be prototyped in general.h */
+void
+xbcopy (s, d, n)
+     char *s, *d;
+     int n;
+{
+  FASTCOPY (s, d, n);
+}
diff --git a/subst.c b/subst.c
new file mode 100644
index 0000000..9ccbf33
--- /dev/null
+++ b/subst.c
@@ -0,0 +1,12054 @@
+/* subst.c -- The part of the shell that does parameter, command, arithmetic,
+   and globbing substitutions. */
+
+/* ``Have a little faith, there's magic in the night.  You ain't a
+     beauty, but, hey, you're alright.'' */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include "bashtypes.h"
+#include <stdio.h>
+#include "chartypes.h"
+#if defined (HAVE_PWD_H)
+#  include <pwd.h>
+#endif
+#include <signal.h>
+#include <errno.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#define NEED_FPURGE_DECL
+
+#include "bashansi.h"
+#include "posixstat.h"
+#include "bashintl.h"
+
+#include "shell.h"
+#include "parser.h"
+#include "flags.h"
+#include "jobs.h"
+#include "execute_cmd.h"
+#include "filecntl.h"
+#include "trap.h"
+#include "pathexp.h"
+#include "mailcheck.h"
+
+#include "shmbutil.h"
+#if defined (HAVE_MBSTR_H) && defined (HAVE_MBSCHR)
+#  include <mbstr.h>		/* mbschr */
+#endif
+#include "typemax.h"
+
+#include "builtins/getopt.h"
+#include "builtins/common.h"
+
+#include "builtins/builtext.h"
+
+#include <tilde/tilde.h>
+#include <glob/strmatch.h>
+
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+/* The size that strings change by. */
+#define DEFAULT_INITIAL_ARRAY_SIZE 112
+#define DEFAULT_ARRAY_SIZE 128
+
+/* Variable types. */
+#define VT_VARIABLE	0
+#define VT_POSPARMS	1
+#define VT_ARRAYVAR	2
+#define VT_ARRAYMEMBER	3
+#define VT_ASSOCVAR	4
+
+#define VT_STARSUB	128	/* $* or ${array[*]} -- used to split */
+
+/* Flags for quoted_strchr */
+#define ST_BACKSL	0x01
+#define ST_CTLESC	0x02
+#define ST_SQUOTE	0x04	/* unused yet */
+#define ST_DQUOTE	0x08	/* unused yet */
+
+/* These defs make it easier to use the editor. */
+#define LBRACE		'{'
+#define RBRACE		'}'
+#define LPAREN		'('
+#define RPAREN		')'
+#define LBRACK		'['
+#define RBRACK		']'
+
+#if defined (HANDLE_MULTIBYTE)
+#define WLPAREN		L'('
+#define WRPAREN		L')'
+#endif
+
+#define DOLLAR_AT_STAR(c)	((c) == '@' || (c) == '*')
+#define STR_DOLLAR_AT_STAR(s)	(DOLLAR_AT_STAR ((s)[0]) && (s)[1] == '\0')
+
+/* Evaluates to 1 if C is one of the shell's special parameters whose length
+   can be taken, but is also one of the special expansion characters. */
+#define VALID_SPECIAL_LENGTH_PARAM(c) \
+  ((c) == '-' || (c) == '?' || (c) == '#' || (c) == '@')
+
+/* Evaluates to 1 if C is one of the shell's special parameters for which an
+   indirect variable reference may be made. */
+#define VALID_INDIR_PARAM(c) \
+  ((posixly_correct == 0 && (c) == '#') || (posixly_correct == 0 && (c) == '?') || (c) == '@' || (c) == '*')
+
+/* Evaluates to 1 if C is one of the OP characters that follows the parameter
+   in ${parameter[:]OPword}. */
+#define VALID_PARAM_EXPAND_CHAR(c) (sh_syntaxtab[(unsigned char)c] & CSUBSTOP)
+
+/* Evaluates to 1 if this is one of the shell's special variables. */
+#define SPECIAL_VAR(name, wi) \
+ (*name && ((DIGIT (*name) && all_digits (name)) || \
+      (name[1] == '\0' && (sh_syntaxtab[(unsigned char)*name] & CSPECVAR)) || \
+      (wi && name[2] == '\0' && VALID_INDIR_PARAM (name[1]))))
+
+/* This can be used by all of the *_extract_* functions that have a similar
+   structure.  It can't just be wrapped in a do...while(0) loop because of
+   the embedded `break'. The dangling else accommodates a trailing semicolon;
+   we could also put in a do ; while (0) */
+
+#define CHECK_STRING_OVERRUN(oind, ind, len, ch) \
+  if (ind >= len) \
+    { \
+      oind = len; \
+      ch = 0; \
+      break; \
+    } \
+  else \
+
+/* An expansion function that takes a string and a quoted flag and returns
+   a WORD_LIST *.  Used as the type of the third argument to
+   expand_string_if_necessary(). */
+typedef WORD_LIST *EXPFUNC PARAMS((char *, int));
+
+/* Process ID of the last command executed within command substitution. */
+pid_t last_command_subst_pid = NO_PID;
+pid_t current_command_subst_pid = NO_PID;
+
+/* Variables used to keep track of the characters in IFS. */
+SHELL_VAR *ifs_var;
+char *ifs_value;
+unsigned char ifs_cmap[UCHAR_MAX + 1];
+int ifs_is_set, ifs_is_null;
+
+#if defined (HANDLE_MULTIBYTE)
+unsigned char ifs_firstc[MB_LEN_MAX];
+size_t ifs_firstc_len;
+#else
+unsigned char ifs_firstc;
+#endif
+
+/* If non-zero, command substitution inherits the value of errexit option */
+int inherit_errexit = 0;
+
+/* Sentinel to tell when we are performing variable assignments preceding a
+   command name and putting them into the environment.  Used to make sure
+   we use the temporary environment when looking up variable values. */
+int assigning_in_environment;
+
+/* Used to hold a list of variable assignments preceding a command.  Global
+   so the SIGCHLD handler in jobs.c can unwind-protect it when it runs a
+   SIGCHLD trap and so it can be saved and restored by the trap handlers. */
+WORD_LIST *subst_assign_varlist = (WORD_LIST *)NULL;
+
+/* Tell the expansion functions to not longjmp back to top_level on fatal
+   errors.  Enabled when doing completion and prompt string expansion. */
+int no_longjmp_on_fatal_error = 0;
+
+/* Non-zero means to allow unmatched globbed filenames to expand to
+   a null file. */
+int allow_null_glob_expansion;
+
+/* Non-zero means to throw an error when globbing fails to match anything. */
+int fail_glob_expansion;
+
+/* Extern functions and variables from different files. */
+extern struct fd_bitmap *current_fds_to_close;
+extern int wordexp_only;
+
+#if defined (JOB_CONTROL) && defined (PROCESS_SUBSTITUTION)
+extern PROCESS *last_procsub_child;
+#endif
+
+#if !defined (HAVE_WCSDUP) && defined (HANDLE_MULTIBYTE)
+extern wchar_t *wcsdup PARAMS((const wchar_t *));
+#endif
+
+#if 0
+/* Variables to keep track of which words in an expanded word list (the
+   output of expand_word_list_internal) are the result of globbing
+   expansions.  GLOB_ARGV_FLAGS is used by execute_cmd.c.
+   (CURRENTLY UNUSED). */
+char *glob_argv_flags;
+static int glob_argv_flags_size;
+#endif
+
+static WORD_LIST *cached_quoted_dollar_at = 0;
+
+/* Distinguished error values to return from expansion functions */
+static WORD_LIST expand_word_error, expand_word_fatal;
+static WORD_DESC expand_wdesc_error, expand_wdesc_fatal;
+static char expand_param_error, expand_param_fatal, expand_param_unset;
+static char extract_string_error, extract_string_fatal;
+
+/* Set by expand_word_unsplit and several of the expand_string_XXX functions;
+   used to inhibit splitting and re-joining $* on $IFS, primarily when doing
+   assignment statements.  The idea is that if we're in a context where this
+   is set, we're not going to be performing word splitting, so we use the same
+   rules to expand $* as we would if it appeared within double quotes. */
+static int expand_no_split_dollar_star = 0;
+
+/* A WORD_LIST of words to be expanded by expand_word_list_internal,
+   without any leading variable assignments. */
+static WORD_LIST *garglist = (WORD_LIST *)NULL;
+
+static char *quoted_substring PARAMS((char *, int, int));
+static int quoted_strlen PARAMS((char *));
+static char *quoted_strchr PARAMS((char *, int, int));
+
+static char *expand_string_if_necessary PARAMS((char *, int, EXPFUNC *));
+static inline char *expand_string_to_string_internal PARAMS((char *, int, EXPFUNC *));
+static WORD_LIST *call_expand_word_internal PARAMS((WORD_DESC *, int, int, int *, int *));
+static WORD_LIST *expand_string_internal PARAMS((char *, int));
+static WORD_LIST *expand_string_leave_quoted PARAMS((char *, int));
+static WORD_LIST *expand_string_for_rhs PARAMS((char *, int, int, int, int *, int *));
+static WORD_LIST *expand_string_for_pat PARAMS((char *, int, int *, int *));
+
+static char *quote_escapes_internal PARAMS((const char *, int));
+
+static WORD_LIST *list_quote_escapes PARAMS((WORD_LIST *));
+static WORD_LIST *list_dequote_escapes PARAMS((WORD_LIST *));
+
+static char *make_quoted_char PARAMS((int));
+static WORD_LIST *quote_list PARAMS((WORD_LIST *));
+
+static int unquoted_substring PARAMS((char *, char *));
+static int unquoted_member PARAMS((int, char *));
+
+#if defined (ARRAY_VARS)
+static SHELL_VAR *do_compound_assignment PARAMS((char *, char *, int));
+#endif
+static int do_assignment_internal PARAMS((const WORD_DESC *, int));
+
+static char *string_extract_verbatim PARAMS((char *, size_t, int *, char *, int));
+static char *string_extract PARAMS((char *, int *, char *, int));
+static char *string_extract_double_quoted PARAMS((char *, int *, int));
+static inline char *string_extract_single_quoted PARAMS((char *, int *));
+static inline int skip_single_quoted PARAMS((const char *, size_t, int, int));
+static int skip_double_quoted PARAMS((char *, size_t, int, int));
+static char *extract_delimited_string PARAMS((char *, int *, char *, char *, char *, int));
+static char *extract_dollar_brace_string PARAMS((char *, int *, int, int));
+static int skip_matched_pair PARAMS((const char *, int, int, int, int));
+
+static char *pos_params PARAMS((char *, int, int, int, int));
+
+static unsigned char *mb_getcharlens PARAMS((char *, int));
+
+static char *remove_upattern PARAMS((char *, char *, int));
+#if defined (HANDLE_MULTIBYTE) 
+static wchar_t *remove_wpattern PARAMS((wchar_t *, size_t, wchar_t *, int));
+#endif
+static char *remove_pattern PARAMS((char *, char *, int));
+
+static int match_upattern PARAMS((char *, char *, int, char **, char **));
+#if defined (HANDLE_MULTIBYTE)
+static int match_wpattern PARAMS((wchar_t *, char **, size_t, wchar_t *, int, char **, char **));
+#endif
+static int match_pattern PARAMS((char *, char *, int, char **, char **));
+static int getpatspec PARAMS((int, char *));
+static char *getpattern PARAMS((char *, int, int));
+static char *variable_remove_pattern PARAMS((char *, char *, int, int));
+static char *list_remove_pattern PARAMS((WORD_LIST *, char *, int, int, int));
+static char *parameter_list_remove_pattern PARAMS((int, char *, int, int));
+#ifdef ARRAY_VARS
+static char *array_remove_pattern PARAMS((SHELL_VAR *, char *, int, int, int));
+#endif
+static char *parameter_brace_remove_pattern PARAMS((char *, char *, int, char *, int, int, int));
+
+static char *string_var_assignment PARAMS((SHELL_VAR *, char *));
+#if defined (ARRAY_VARS)
+static char *array_var_assignment PARAMS((SHELL_VAR *, int, int, int));
+#endif
+static char *pos_params_assignment PARAMS((WORD_LIST *, int, int));
+static char *string_transform PARAMS((int, SHELL_VAR *, char *));
+static char *list_transform PARAMS((int, SHELL_VAR *, WORD_LIST *, int, int));
+static char *parameter_list_transform PARAMS((int, int, int));
+#if defined ARRAY_VARS
+static char *array_transform PARAMS((int, SHELL_VAR *, int, int));
+#endif
+static char *parameter_brace_transform PARAMS((char *, char *, int, char *, int, int, int, int));
+static int valid_parameter_transform PARAMS((char *));
+
+static char *process_substitute PARAMS((char *, int));
+
+static char *read_comsub PARAMS((int, int, int, int *));
+
+#ifdef ARRAY_VARS
+static arrayind_t array_length_reference PARAMS((char *));
+#endif
+
+static int valid_brace_expansion_word PARAMS((char *, int));
+static int chk_atstar PARAMS((char *, int, int, int *, int *));
+static int chk_arithsub PARAMS((const char *, int));
+
+static WORD_DESC *parameter_brace_expand_word PARAMS((char *, int, int, int, arrayind_t *));
+static char *parameter_brace_find_indir PARAMS((char *, int, int, int));
+static WORD_DESC *parameter_brace_expand_indir PARAMS((char *, int, int, int, int *, int *));
+static WORD_DESC *parameter_brace_expand_rhs PARAMS((char *, char *, int, int, int, int *, int *));
+static void parameter_brace_expand_error PARAMS((char *, char *, int));
+
+static int valid_length_expression PARAMS((char *));
+static intmax_t parameter_brace_expand_length PARAMS((char *));
+
+static char *skiparith PARAMS((char *, int));
+static int verify_substring_values PARAMS((SHELL_VAR *, char *, char *, int, intmax_t *, intmax_t *));
+static int get_var_and_type PARAMS((char *, char *, arrayind_t, int, int, SHELL_VAR **, char **));
+static char *mb_substring PARAMS((char *, int, int));
+static char *parameter_brace_substring PARAMS((char *, char *, int, char *, int, int, int));
+
+static int shouldexp_replacement PARAMS((char *));
+
+static char *pos_params_pat_subst PARAMS((char *, char *, char *, int));
+
+static char *parameter_brace_patsub PARAMS((char *, char *, int, char *, int, int, int));
+
+static char *pos_params_casemod PARAMS((char *, char *, int, int));
+static char *parameter_brace_casemod PARAMS((char *, char *, int, int, char *, int, int, int));
+
+static WORD_DESC *parameter_brace_expand PARAMS((char *, int *, int, int, int *, int *));
+static WORD_DESC *param_expand PARAMS((char *, int *, int, int *, int *, int *, int *, int));
+
+static WORD_LIST *expand_word_internal PARAMS((WORD_DESC *, int, int, int *, int *));
+
+static WORD_LIST *word_list_split PARAMS((WORD_LIST *));
+
+static void exp_jump_to_top_level PARAMS((int));
+
+static WORD_LIST *separate_out_assignments PARAMS((WORD_LIST *));
+static WORD_LIST *glob_expand_word_list PARAMS((WORD_LIST *, int));
+#ifdef BRACE_EXPANSION
+static WORD_LIST *brace_expand_word_list PARAMS((WORD_LIST *, int));
+#endif
+#if defined (ARRAY_VARS)
+static int make_internal_declare PARAMS((char *, char *, char *));
+static void expand_compound_assignment_word PARAMS((WORD_LIST *, int));
+static WORD_LIST *expand_declaration_argument PARAMS((WORD_LIST *, WORD_LIST *));
+#endif
+static WORD_LIST *shell_expand_word_list PARAMS((WORD_LIST *, int));
+static WORD_LIST *expand_word_list_internal PARAMS((WORD_LIST *, int));
+
+/* **************************************************************** */
+/*								    */
+/*			Utility Functions			    */
+/*								    */
+/* **************************************************************** */
+
+#if defined (DEBUG)
+void
+dump_word_flags (flags)
+     int flags;
+{
+  int f;
+
+  f = flags;
+  fprintf (stderr, "%d -> ", f);
+  if (f & W_ARRAYIND)
+    {
+      f &= ~W_ARRAYIND;
+      fprintf (stderr, "W_ARRAYIND%s", f ? "|" : "");
+    }
+  if (f & W_ASSIGNASSOC)
+    {
+      f &= ~W_ASSIGNASSOC;
+      fprintf (stderr, "W_ASSIGNASSOC%s", f ? "|" : "");
+    }
+  if (f & W_ASSIGNARRAY)
+    {
+      f &= ~W_ASSIGNARRAY;
+      fprintf (stderr, "W_ASSIGNARRAY%s", f ? "|" : "");
+    }
+  if (f & W_SAWQUOTEDNULL)
+    {
+      f &= ~W_SAWQUOTEDNULL;
+      fprintf (stderr, "W_SAWQUOTEDNULL%s", f ? "|" : "");
+    }
+  if (f & W_NOPROCSUB)
+    {
+      f &= ~W_NOPROCSUB;
+      fprintf (stderr, "W_NOPROCSUB%s", f ? "|" : "");
+    }
+  if (f & W_DQUOTE)
+    {
+      f &= ~W_DQUOTE;
+      fprintf (stderr, "W_DQUOTE%s", f ? "|" : "");
+    }
+  if (f & W_HASQUOTEDNULL)
+    {
+      f &= ~W_HASQUOTEDNULL;
+      fprintf (stderr, "W_HASQUOTEDNULL%s", f ? "|" : "");
+    }
+  if (f & W_ASSIGNARG)
+    {
+      f &= ~W_ASSIGNARG;
+      fprintf (stderr, "W_ASSIGNARG%s", f ? "|" : "");
+    }
+  if (f & W_ASSNBLTIN)
+    {
+      f &= ~W_ASSNBLTIN;
+      fprintf (stderr, "W_ASSNBLTIN%s", f ? "|" : "");
+    }
+  if (f & W_ASSNGLOBAL)
+    {
+      f &= ~W_ASSNGLOBAL;
+      fprintf (stderr, "W_ASSNGLOBAL%s", f ? "|" : "");
+    }
+  if (f & W_COMPASSIGN)
+    {
+      f &= ~W_COMPASSIGN;
+      fprintf (stderr, "W_COMPASSIGN%s", f ? "|" : "");
+    }
+  if (f & W_EXPANDRHS)
+    {
+      f &= ~W_EXPANDRHS;
+      fprintf (stderr, "W_EXPANDRHS%s", f ? "|" : "");
+    }
+  if (f & W_ITILDE)
+    {
+      f &= ~W_ITILDE;
+      fprintf (stderr, "W_ITILDE%s", f ? "|" : "");
+    }
+  if (f & W_NOTILDE)
+    {
+      f &= ~W_NOTILDE;
+      fprintf (stderr, "W_NOTILDE%s", f ? "|" : "");
+    }
+  if (f & W_ASSIGNRHS)
+    {
+      f &= ~W_ASSIGNRHS;
+      fprintf (stderr, "W_ASSIGNRHS%s", f ? "|" : "");
+    }
+  if (f & W_NOASSNTILDE)
+    {
+      f &= ~W_NOASSNTILDE;
+      fprintf (stderr, "W_NOASSNTILDE%s", f ? "|" : "");
+    }
+  if (f & W_NOCOMSUB)
+    {
+      f &= ~W_NOCOMSUB;
+      fprintf (stderr, "W_NOCOMSUB%s", f ? "|" : "");
+    }
+  if (f & W_DOLLARSTAR)
+    {
+      f &= ~W_DOLLARSTAR;
+      fprintf (stderr, "W_DOLLARSTAR%s", f ? "|" : "");
+    }
+  if (f & W_DOLLARAT)
+    {
+      f &= ~W_DOLLARAT;
+      fprintf (stderr, "W_DOLLARAT%s", f ? "|" : "");
+    }
+  if (f & W_TILDEEXP)
+    {
+      f &= ~W_TILDEEXP;
+      fprintf (stderr, "W_TILDEEXP%s", f ? "|" : "");
+    }
+  if (f & W_NOSPLIT2)
+    {
+      f &= ~W_NOSPLIT2;
+      fprintf (stderr, "W_NOSPLIT2%s", f ? "|" : "");
+    }
+  if (f & W_NOSPLIT)
+    {
+      f &= ~W_NOSPLIT;
+      fprintf (stderr, "W_NOSPLIT%s", f ? "|" : "");
+    }
+  if (f & W_NOBRACE)
+    {
+      f &= ~W_NOBRACE;
+      fprintf (stderr, "W_NOBRACE%s", f ? "|" : "");
+    }
+  if (f & W_NOGLOB)
+    {
+      f &= ~W_NOGLOB;
+      fprintf (stderr, "W_NOGLOB%s", f ? "|" : "");
+    }
+  if (f & W_SPLITSPACE)
+    {
+      f &= ~W_SPLITSPACE;
+      fprintf (stderr, "W_SPLITSPACE%s", f ? "|" : "");
+    }
+  if (f & W_ASSIGNMENT)
+    {
+      f &= ~W_ASSIGNMENT;
+      fprintf (stderr, "W_ASSIGNMENT%s", f ? "|" : "");
+    }
+  if (f & W_QUOTED)
+    {
+      f &= ~W_QUOTED;
+      fprintf (stderr, "W_QUOTED%s", f ? "|" : "");
+    }
+  if (f & W_HASDOLLAR)
+    {
+      f &= ~W_HASDOLLAR;
+      fprintf (stderr, "W_HASDOLLAR%s", f ? "|" : "");
+    }
+  if (f & W_COMPLETE)
+    {
+      f &= ~W_COMPLETE;
+      fprintf (stderr, "W_COMPLETE%s", f ? "|" : "");
+    }
+  if (f & W_CHKLOCAL)
+    {
+      f &= ~W_CHKLOCAL;
+      fprintf (stderr, "W_CHKLOCAL%s", f ? "|" : "");
+    }
+  if (f & W_FORCELOCAL)
+    {
+      f &= ~W_FORCELOCAL;
+      fprintf (stderr, "W_FORCELOCAL%s", f ? "|" : "");
+    }
+
+  fprintf (stderr, "\n");
+  fflush (stderr);
+}
+#endif
+
+#ifdef INCLUDE_UNUSED
+static char *
+quoted_substring (string, start, end)
+     char *string;
+     int start, end;
+{
+  register int len, l;
+  register char *result, *s, *r;
+
+  len = end - start;
+
+  /* Move to string[start], skipping quoted characters. */
+  for (s = string, l = 0; *s && l < start; )
+    {
+      if (*s == CTLESC)
+	{
+	  s++;
+	  continue;
+	}
+      l++;
+      if (*s == 0)
+	break;
+    }
+
+  r = result = (char *)xmalloc (2*len + 1);      /* save room for quotes */
+
+  /* Copy LEN characters, including quote characters. */
+  s = string + l;
+  for (l = 0; l < len; s++)
+    {
+      if (*s == CTLESC)
+	*r++ = *s++;
+      *r++ = *s;
+      l++;
+      if (*s == 0)
+	break;
+    }
+  *r = '\0';
+  return result;
+}
+#endif
+
+#ifdef INCLUDE_UNUSED
+/* Return the length of S, skipping over quoted characters */
+static int
+quoted_strlen (s)
+     char *s;
+{
+  register char *p;
+  int i;
+
+  i = 0;
+  for (p = s; *p; p++)
+    {
+      if (*p == CTLESC)
+	{
+	  p++;
+	  if (*p == 0)
+	    return (i + 1);
+	}
+      i++;
+    }
+
+  return i;
+}
+#endif
+
+#ifdef INCLUDE_UNUSED
+/* Find the first occurrence of character C in string S, obeying shell
+   quoting rules.  If (FLAGS & ST_BACKSL) is non-zero, backslash-escaped
+   characters are skipped.  If (FLAGS & ST_CTLESC) is non-zero, characters
+   escaped with CTLESC are skipped. */
+static char *
+quoted_strchr (s, c, flags)
+     char *s;
+     int c, flags;
+{
+  register char *p;
+
+  for (p = s; *p; p++)
+    {
+      if (((flags & ST_BACKSL) && *p == '\\')
+	    || ((flags & ST_CTLESC) && *p == CTLESC))
+	{
+	  p++;
+	  if (*p == '\0')
+	    return ((char *)NULL);
+	  continue;
+	}
+      else if (*p == c)
+	return p;
+    }
+  return ((char *)NULL);
+}
+
+/* Return 1 if CHARACTER appears in an unquoted portion of
+   STRING.  Return 0 otherwise.  CHARACTER must be a single-byte character. */
+static int
+unquoted_member (character, string)
+     int character;
+     char *string;
+{
+  size_t slen;
+  int sindex, c;
+  DECLARE_MBSTATE;
+
+  slen = strlen (string);
+  sindex = 0;
+  while (c = string[sindex])
+    {
+      if (c == character)
+	return (1);
+
+      switch (c)
+	{
+	default:
+	  ADVANCE_CHAR (string, slen, sindex);
+	  break;
+
+	case '\\':
+	  sindex++;
+	  if (string[sindex])
+	    ADVANCE_CHAR (string, slen, sindex);
+	  break;
+
+	case '\'':
+	  sindex = skip_single_quoted (string, slen, ++sindex, 0);
+	  break;
+
+	case '"':
+	  sindex = skip_double_quoted (string, slen, ++sindex, 0);
+	  break;
+	}
+    }
+  return (0);
+}
+
+/* Return 1 if SUBSTR appears in an unquoted portion of STRING. */
+static int
+unquoted_substring (substr, string)
+     char *substr, *string;
+{
+  size_t slen;
+  int sindex, c, sublen;
+  DECLARE_MBSTATE;
+
+  if (substr == 0 || *substr == '\0')
+    return (0);
+
+  slen = strlen (string);
+  sublen = strlen (substr);
+  for (sindex = 0; c = string[sindex]; )
+    {
+      if (STREQN (string + sindex, substr, sublen))
+	return (1);
+
+      switch (c)
+	{
+	case '\\':
+	  sindex++;
+	  if (string[sindex])
+	    ADVANCE_CHAR (string, slen, sindex);
+	  break;
+
+	case '\'':
+	  sindex = skip_single_quoted (string, slen, ++sindex, 0);
+	  break;
+
+	case '"':
+	  sindex = skip_double_quoted (string, slen, ++sindex, 0);
+	  break;
+
+	default:
+	  ADVANCE_CHAR (string, slen, sindex);
+	  break;
+	}
+    }
+  return (0);
+}
+#endif
+
+/* Most of the substitutions must be done in parallel.  In order
+   to avoid using tons of unclear goto's, I have some functions
+   for manipulating malloc'ed strings.  They all take INDX, a
+   pointer to an integer which is the offset into the string
+   where manipulation is taking place.  They also take SIZE, a
+   pointer to an integer which is the current length of the
+   character array for this string. */
+
+/* Append SOURCE to TARGET at INDEX.  SIZE is the current amount
+   of space allocated to TARGET.  SOURCE can be NULL, in which
+   case nothing happens.  Gets rid of SOURCE by freeing it.
+   Returns TARGET in case the location has changed. */
+INLINE char *
+sub_append_string (source, target, indx, size)
+     char *source, *target;
+     int *indx;
+     size_t *size;
+{
+  if (source)
+    {
+      int n;
+      size_t srclen;
+
+      srclen = STRLEN (source);
+      if (srclen >= (int)(*size - *indx))
+	{
+	  n = srclen + *indx;
+	  n = (n + DEFAULT_ARRAY_SIZE) - (n % DEFAULT_ARRAY_SIZE);
+	  target = (char *)xrealloc (target, (*size = n));
+	}
+
+      FASTCOPY (source, target + *indx, srclen);
+      *indx += srclen;
+      target[*indx] = '\0';
+
+      free (source);
+    }
+  return (target);
+}
+
+#if 0
+/* UNUSED */
+/* Append the textual representation of NUMBER to TARGET.
+   INDX and SIZE are as in SUB_APPEND_STRING. */
+char *
+sub_append_number (number, target, indx, size)
+     intmax_t number;
+     char *target;
+     int *indx;
+     size_t *size;
+{
+  char *temp;
+
+  temp = itos (number);
+  return (sub_append_string (temp, target, indx, size));
+}
+#endif
+
+/* Extract a substring from STRING, starting at SINDEX and ending with
+   one of the characters in CHARLIST.  Don't make the ending character
+   part of the string.  Leave SINDEX pointing at the ending character.
+   Understand about backslashes in the string.  If (flags & SX_VARNAME)
+   is non-zero, and array variables have been compiled into the shell,
+   everything between a `[' and a corresponding `]' is skipped over.
+   If (flags & SX_NOALLOC) is non-zero, don't return the substring, just
+   update SINDEX.  If (flags & SX_REQMATCH) is non-zero, the string must
+   contain a closing character from CHARLIST. */
+static char *
+string_extract (string, sindex, charlist, flags)
+     char *string;
+     int *sindex;
+     char *charlist;
+     int flags;
+{
+  register int c, i;
+  int found;
+  size_t slen;
+  char *temp;
+  DECLARE_MBSTATE;
+
+  slen = (MB_CUR_MAX > 1) ? strlen (string + *sindex) + *sindex : 0;
+  i = *sindex;
+  found = 0;
+  while (c = string[i])
+    {
+      if (c == '\\')
+	{
+	  if (string[i + 1])
+	    i++;
+	  else
+	    break;
+	}
+#if defined (ARRAY_VARS)
+      else if ((flags & SX_VARNAME) && c == LBRACK)
+	{
+	  int ni;
+	  /* If this is an array subscript, skip over it and continue. */
+	  ni = skipsubscript (string, i, 0);
+	  if (string[ni] == RBRACK)
+	    i = ni;
+	}
+#endif
+      else if (MEMBER (c, charlist))
+	{
+	  found = 1;
+	  break;
+	}
+
+      ADVANCE_CHAR (string, slen, i);
+    }
+
+  /* If we had to have a matching delimiter and didn't find one, return an
+     error and let the caller deal with it. */
+  if ((flags & SX_REQMATCH) && found == 0)
+    {
+      *sindex = i;
+      return (&extract_string_error);
+    }
+  
+  temp = (flags & SX_NOALLOC) ? (char *)NULL : substring (string, *sindex, i);
+  *sindex = i;
+  
+  return (temp);
+}
+
+/* Extract the contents of STRING as if it is enclosed in double quotes.
+   SINDEX, when passed in, is the offset of the character immediately
+   following the opening double quote; on exit, SINDEX is left pointing after
+   the closing double quote.  If STRIPDQ is non-zero, unquoted double
+   quotes are stripped and the string is terminated by a null byte.
+   Backslashes between the embedded double quotes are processed.  If STRIPDQ
+   is zero, an unquoted `"' terminates the string. */
+static char *
+string_extract_double_quoted (string, sindex, flags)
+     char *string;
+     int *sindex, flags;
+{
+  size_t slen;
+  char *send;
+  int j, i, t;
+  unsigned char c;
+  char *temp, *ret;		/* The new string we return. */
+  int pass_next, backquote, si;	/* State variables for the machine. */
+  int dquote;
+  int stripdq;
+  DECLARE_MBSTATE;
+
+  slen = strlen (string + *sindex) + *sindex;
+  send = string + slen;
+
+  stripdq = (flags & SX_STRIPDQ);
+
+  pass_next = backquote = dquote = 0;
+  temp = (char *)xmalloc (1 + slen - *sindex);
+
+  j = 0;
+  i = *sindex;
+  while (c = string[i])
+    {
+      /* Process a character that was quoted by a backslash. */
+      if (pass_next)
+	{
+	  /* XXX - take another look at this in light of Interp 221 */
+	  /* Posix.2 sez:
+
+	     ``The backslash shall retain its special meaning as an escape
+	     character only when followed by one of the characters:
+		$	`	"	\	<newline>''.
+
+	     If STRIPDQ is zero, we handle the double quotes here and let
+	     expand_word_internal handle the rest.  If STRIPDQ is non-zero,
+	     we have already been through one round of backslash stripping,
+	     and want to strip these backslashes only if DQUOTE is non-zero,
+	     indicating that we are inside an embedded double-quoted string. */
+
+	  /* If we are in an embedded quoted string, then don't strip
+	     backslashes before characters for which the backslash
+	     retains its special meaning, but remove backslashes in
+	     front of other characters.  If we are not in an
+	     embedded quoted string, don't strip backslashes at all.
+	     This mess is necessary because the string was already
+	     surrounded by double quotes (and sh has some really weird
+	     quoting rules).
+	     The returned string will be run through expansion as if
+	     it were double-quoted. */
+	  if ((stripdq == 0 && c != '"') ||
+	      (stripdq && ((dquote && (sh_syntaxtab[c] & CBSDQUOTE)) || dquote == 0)))
+	    temp[j++] = '\\';
+	  pass_next = 0;
+
+add_one_character:
+	  COPY_CHAR_I (temp, j, string, send, i);
+	  continue;
+	}
+
+      /* A backslash protects the next character.  The code just above
+	 handles preserving the backslash in front of any character but
+	 a double quote. */
+      if (c == '\\')
+	{
+	  pass_next++;
+	  i++;
+	  continue;
+	}
+
+      /* Inside backquotes, ``the portion of the quoted string from the
+	 initial backquote and the characters up to the next backquote
+	 that is not preceded by a backslash, having escape characters
+	 removed, defines that command''. */
+      if (backquote)
+	{
+	  if (c == '`')
+	    backquote = 0;
+	  temp[j++] = c;	/* COPY_CHAR_I? */
+	  i++;
+	  continue;
+	}
+
+      if (c == '`')
+	{
+	  temp[j++] = c;
+	  backquote++;
+	  i++;
+	  continue;
+	}
+
+      /* Pass everything between `$(' and the matching `)' or a quoted
+	 ${ ... } pair through according to the Posix.2 specification. */
+      if (c == '$' && ((string[i + 1] == LPAREN) || (string[i + 1] == LBRACE)))
+	{
+	  int free_ret = 1;
+
+	  si = i + 2;
+	  if (string[i + 1] == LPAREN)
+	    ret = extract_command_subst (string, &si, (flags & SX_COMPLETE));
+	  else
+	    ret = extract_dollar_brace_string (string, &si, Q_DOUBLE_QUOTES, 0);
+
+	  temp[j++] = '$';
+	  temp[j++] = string[i + 1];
+
+	  /* Just paranoia; ret will not be 0 unless no_longjmp_on_fatal_error
+	     is set. */
+	  if (ret == 0 && no_longjmp_on_fatal_error)
+	    {
+	      free_ret = 0;
+	      ret = string + i + 2;
+	    }
+
+	  /* XXX - CHECK_STRING_OVERRUN here? */
+	  for (t = 0; ret[t]; t++, j++)
+	    temp[j] = ret[t];
+	  temp[j] = string[si];
+
+	  if (si < i + 2)	/* we went back? */
+	    i += 2;
+	  else if (string[si])
+	    {
+	      j++;
+	      i = si + 1;
+	    }
+	  else
+	    i = si;
+
+	  if (free_ret)
+	    free (ret);
+	  continue;
+	}
+
+      /* Add any character but a double quote to the quoted string we're
+	 accumulating. */
+      if (c != '"')
+	goto add_one_character;
+
+      /* c == '"' */
+      if (stripdq)
+	{
+	  dquote ^= 1;
+	  i++;
+	  continue;
+	}
+
+      break;
+    }
+  temp[j] = '\0';
+
+  /* Point to after the closing quote. */
+  if (c)
+    i++;
+  *sindex = i;
+
+  return (temp);
+}
+
+/* This should really be another option to string_extract_double_quoted. */
+static int
+skip_double_quoted (string, slen, sind, flags)
+     char *string;
+     size_t slen;
+     int sind;
+     int flags;
+{
+  int c, i;
+  char *ret;
+  int pass_next, backquote, si;
+  DECLARE_MBSTATE;
+
+  pass_next = backquote = 0;
+  i = sind;
+  while (c = string[i])
+    {
+      if (pass_next)
+	{
+	  pass_next = 0;
+	  ADVANCE_CHAR (string, slen, i);
+	  continue;
+	}
+      else if (c == '\\')
+	{
+	  pass_next++;
+	  i++;
+	  continue;
+	}
+      else if (backquote)
+	{
+	  if (c == '`')
+	    backquote = 0;
+	  ADVANCE_CHAR (string, slen, i);
+	  continue;
+	}
+      else if (c == '`')
+	{
+	  backquote++;
+	  i++;
+	  continue;
+	}
+      else if (c == '$' && ((string[i + 1] == LPAREN) || (string[i + 1] == LBRACE)))
+	{
+	  si = i + 2;
+	  if (string[i + 1] == LPAREN)
+	    ret = extract_command_subst (string, &si, SX_NOALLOC|(flags&SX_COMPLETE));
+	  else
+	    ret = extract_dollar_brace_string (string, &si, Q_DOUBLE_QUOTES, SX_NOALLOC);
+
+	  /* These can consume the entire string if they are unterminated */
+	  CHECK_STRING_OVERRUN (i, si, slen, c);
+
+	  i = si + 1;
+	  continue;
+	}
+      else if (c != '"')
+	{
+	  ADVANCE_CHAR (string, slen, i);
+	  continue;
+	}
+      else
+	break;
+    }
+
+  if (c)
+    i++;
+
+  return (i);
+}
+
+/* Extract the contents of STRING as if it is enclosed in single quotes.
+   SINDEX, when passed in, is the offset of the character immediately
+   following the opening single quote; on exit, SINDEX is left pointing after
+   the closing single quote. */
+static inline char *
+string_extract_single_quoted (string, sindex)
+     char *string;
+     int *sindex;
+{
+  register int i;
+  size_t slen;
+  char *t;
+  DECLARE_MBSTATE;
+
+  /* Don't need slen for ADVANCE_CHAR unless multibyte chars possible. */
+  slen = (MB_CUR_MAX > 1) ? strlen (string + *sindex) + *sindex : 0;
+  i = *sindex;
+  while (string[i] && string[i] != '\'')
+    ADVANCE_CHAR (string, slen, i);
+
+  t = substring (string, *sindex, i);
+
+  if (string[i])
+    i++;
+  *sindex = i;
+
+  return (t);
+}
+
+/* Skip over a single-quoted string.  We overload the SX_COMPLETE flag to mean
+   that we are splitting out words for completion and have encountered a $'...'
+   string, which allows backslash-escaped single quotes. */
+static inline int
+skip_single_quoted (string, slen, sind, flags)
+     const char *string;
+     size_t slen;
+     int sind;
+     int flags;
+{
+  register int c;
+  DECLARE_MBSTATE;
+
+  c = sind;
+  while (string[c] && string[c] != '\'')
+    {
+      if ((flags & SX_COMPLETE) && string[c] == '\\' && string[c+1] == '\'' && string[c+2])
+	ADVANCE_CHAR (string, slen, c);
+      ADVANCE_CHAR (string, slen, c);
+    }
+
+  if (string[c])
+    c++;
+  return c;
+}
+
+/* Just like string_extract, but doesn't hack backslashes or any of
+   that other stuff.  Obeys CTLESC quoting.  Used to do splitting on $IFS. */
+static char *
+string_extract_verbatim (string, slen, sindex, charlist, flags)
+     char *string;
+     size_t slen;
+     int *sindex;
+     char *charlist;
+     int flags;
+{
+  register int i;
+#if defined (HANDLE_MULTIBYTE)
+  wchar_t *wcharlist;
+#endif
+  int c;
+  char *temp;
+  DECLARE_MBSTATE;
+
+  if ((flags & SX_NOCTLESC) && charlist[0] == '\'' && charlist[1] == '\0')
+    {
+      temp = string_extract_single_quoted (string, sindex);
+      --*sindex;	/* leave *sindex at separator character */
+      return temp;
+    }
+
+  /* This can never be called with charlist == NULL. If *charlist == NULL,
+     we can skip the loop and just return a copy of the string, updating
+     *sindex */
+  if (*charlist == 0)
+    {
+      temp = string + *sindex;
+      c = (*sindex == 0) ? slen : STRLEN (temp);
+      temp = savestring (temp);
+      *sindex += c;
+      return temp;
+    }
+
+  i = *sindex;
+#if defined (HANDLE_MULTIBYTE)
+  wcharlist = 0;
+#endif
+  while (c = string[i])
+    {
+#if defined (HANDLE_MULTIBYTE)
+      size_t mblength;
+#endif
+      if ((flags & SX_NOCTLESC) == 0 && c == CTLESC)
+	{
+	  i += 2;
+	  CHECK_STRING_OVERRUN (i, i, slen, c);
+	  continue;
+	}
+      /* Even if flags contains SX_NOCTLESC, we let CTLESC quoting CTLNUL
+	 through, to protect the CTLNULs from later calls to
+	 remove_quoted_nulls. */
+      else if ((flags & SX_NOESCCTLNUL) == 0 && c == CTLESC && string[i+1] == CTLNUL)
+	{
+	  i += 2;
+	  CHECK_STRING_OVERRUN (i, i, slen, c);
+	  continue;
+	}
+
+#if defined (HANDLE_MULTIBYTE)
+      if (locale_utf8locale && slen > i && UTF8_SINGLEBYTE (string[i]))
+	mblength = (string[i] != 0) ? 1 : 0;
+      else
+	mblength = MBLEN (string + i, slen - i);
+      if (mblength > 1)
+	{
+	  wchar_t wc;
+	  mblength = mbtowc (&wc, string + i, slen - i);
+	  if (MB_INVALIDCH (mblength))
+	    {
+	      if (MEMBER (c, charlist))
+		break;
+	    }
+	  else
+	    {
+	      if (wcharlist == 0)
+		{
+		  size_t len;
+		  len = mbstowcs (wcharlist, charlist, 0);
+		  if (len == -1)
+		    len = 0;
+		  wcharlist = (wchar_t *)xmalloc (sizeof (wchar_t) * (len + 1));
+		  mbstowcs (wcharlist, charlist, len + 1);
+		}
+
+	      if (wcschr (wcharlist, wc))
+		break;
+	    }
+	}
+      else		
+#endif
+      if (MEMBER (c, charlist))
+	break;
+
+      ADVANCE_CHAR (string, slen, i);
+    }
+
+#if defined (HANDLE_MULTIBYTE)
+  FREE (wcharlist);
+#endif
+
+  temp = substring (string, *sindex, i);
+  *sindex = i;
+
+  return (temp);
+}
+
+/* Extract the $( construct in STRING, and return a new string.
+   Start extracting at (SINDEX) as if we had just seen "$(".
+   Make (SINDEX) get the position of the matching ")". )
+   XFLAGS is additional flags to pass to other extraction functions. */
+char *
+extract_command_subst (string, sindex, xflags)
+     char *string;
+     int *sindex;
+     int xflags;
+{
+  char *ret;
+
+  if (string[*sindex] == LPAREN || (xflags & SX_COMPLETE))
+    return (extract_delimited_string (string, sindex, "$(", "(", ")", xflags|SX_COMMAND)); /*)*/
+  else
+    {
+      xflags |= (no_longjmp_on_fatal_error ? SX_NOLONGJMP : 0);
+      ret = xparse_dolparen (string, string+*sindex, sindex, xflags);
+      return ret;
+    }
+}
+
+/* Extract the $[ construct in STRING, and return a new string. (])
+   Start extracting at (SINDEX) as if we had just seen "$[".
+   Make (SINDEX) get the position of the matching "]". */
+char *
+extract_arithmetic_subst (string, sindex)
+     char *string;
+     int *sindex;
+{
+  return (extract_delimited_string (string, sindex, "$[", "[", "]", 0)); /*]*/
+}
+
+#if defined (PROCESS_SUBSTITUTION)
+/* Extract the <( or >( construct in STRING, and return a new string.
+   Start extracting at (SINDEX) as if we had just seen "<(".
+   Make (SINDEX) get the position of the matching ")". */ /*))*/
+char *
+extract_process_subst (string, starter, sindex, xflags)
+     char *string;
+     char *starter;
+     int *sindex;
+     int xflags;
+{
+#if 0
+  /* XXX - check xflags&SX_COMPLETE here? */
+  return (extract_delimited_string (string, sindex, starter, "(", ")", SX_COMMAND));
+#else
+  xflags |= (no_longjmp_on_fatal_error ? SX_NOLONGJMP : 0);
+  return (xparse_dolparen (string, string+*sindex, sindex, xflags));
+#endif
+}
+#endif /* PROCESS_SUBSTITUTION */
+
+#if defined (ARRAY_VARS)
+/* This can be fooled by unquoted right parens in the passed string. If
+   each caller verifies that the last character in STRING is a right paren,
+   we don't even need to call extract_delimited_string. */
+char *
+extract_array_assignment_list (string, sindex)
+     char *string;
+     int *sindex;
+{
+  int slen;
+  char *ret;
+
+  slen = strlen (string);
+  if (string[slen - 1] == RPAREN)
+   {
+      ret = substring (string, *sindex, slen - 1);
+      *sindex = slen - 1;
+      return ret;
+    }
+  return 0;  
+}
+#endif
+
+/* Extract and create a new string from the contents of STRING, a
+   character string delimited with OPENER and CLOSER.  SINDEX is
+   the address of an int describing the current offset in STRING;
+   it should point to just after the first OPENER found.  On exit,
+   SINDEX gets the position of the last character of the matching CLOSER.
+   If OPENER is more than a single character, ALT_OPENER, if non-null,
+   contains a character string that can also match CLOSER and thus
+   needs to be skipped. */
+static char *
+extract_delimited_string (string, sindex, opener, alt_opener, closer, flags)
+     char *string;
+     int *sindex;
+     char *opener, *alt_opener, *closer;
+     int flags;
+{
+  int i, c, si;
+  size_t slen;
+  char *t, *result;
+  int pass_character, nesting_level, in_comment;
+  int len_closer, len_opener, len_alt_opener;
+  DECLARE_MBSTATE;
+
+  slen = strlen (string + *sindex) + *sindex;
+  len_opener = STRLEN (opener);
+  len_alt_opener = STRLEN (alt_opener);
+  len_closer = STRLEN (closer);
+
+  pass_character = in_comment = 0;
+
+  nesting_level = 1;
+  i = *sindex;
+
+  while (nesting_level)
+    {
+      c = string[i];
+
+      /* If a recursive call or a call to ADVANCE_CHAR leaves the index beyond
+	 the end of the string, catch it and cut the loop. */
+      if (i > slen)
+	{
+	  i = slen;
+	  c = string[i = slen];
+	  break;
+	}
+
+      if (c == 0)
+	break;
+
+      if (in_comment)
+	{
+	  if (c == '\n')
+	    in_comment = 0;
+	  ADVANCE_CHAR (string, slen, i);
+	  continue;
+	}
+
+      if (pass_character)	/* previous char was backslash */
+	{
+	  pass_character = 0;
+	  ADVANCE_CHAR (string, slen, i);
+	  continue;
+	}
+
+      /* Not exactly right yet; should handle shell metacharacters and
+	 multibyte characters, too.  See COMMENT_BEGIN define in parse.y */
+      if ((flags & SX_COMMAND) && c == '#' && (i == 0 || string[i - 1] == '\n' || shellblank (string[i - 1])))
+	{
+          in_comment = 1;
+          ADVANCE_CHAR (string, slen, i);
+          continue;
+	}
+        
+      if (c == CTLESC || c == '\\')
+	{
+	  pass_character++;
+	  i++;
+	  continue;
+	}
+
+      /* Process a nested command substitution, but only if we're parsing an
+	 arithmetic substitution. */
+      if ((flags & SX_COMMAND) && string[i] == '$' && string[i+1] == LPAREN)
+        {
+          si = i + 2;
+          t = extract_command_subst (string, &si, flags|SX_NOALLOC);
+          CHECK_STRING_OVERRUN (i, si, slen, c);
+          i = si + 1;
+          continue;
+        }
+
+      /* Process a nested OPENER. */
+      if (STREQN (string + i, opener, len_opener))
+	{
+	  si = i + len_opener;
+	  t = extract_delimited_string (string, &si, opener, alt_opener, closer, flags|SX_NOALLOC);
+	  CHECK_STRING_OVERRUN (i, si, slen, c);
+	  i = si + 1;
+	  continue;
+	}
+
+      /* Process a nested ALT_OPENER */
+      if (len_alt_opener && STREQN (string + i, alt_opener, len_alt_opener))
+	{
+	  si = i + len_alt_opener;
+	  t = extract_delimited_string (string, &si, alt_opener, alt_opener, closer, flags|SX_NOALLOC);
+	  CHECK_STRING_OVERRUN (i, si, slen, c);
+	  i = si + 1;
+	  continue;
+	}
+
+      /* If the current substring terminates the delimited string, decrement
+	 the nesting level. */
+      if (STREQN (string + i, closer, len_closer))
+	{
+	  i += len_closer - 1;	/* move to last byte of the closer */
+	  nesting_level--;
+	  if (nesting_level == 0)
+	    break;
+	}
+
+      /* Pass old-style command substitution through verbatim. */
+      if (c == '`')
+	{
+	  si = i + 1;
+	  t = string_extract (string, &si, "`", flags|SX_NOALLOC);
+	  CHECK_STRING_OVERRUN (i, si, slen, c);
+	  i = si + 1;
+	  continue;
+	}
+
+      /* Pass single-quoted and double-quoted strings through verbatim. */
+      if (c == '\'' || c == '"')
+	{
+	  si = i + 1;
+	  i = (c == '\'') ? skip_single_quoted (string, slen, si, 0)
+			  : skip_double_quoted (string, slen, si, 0);
+	  continue;
+	}
+
+      /* move past this character, which was not special. */
+      ADVANCE_CHAR (string, slen, i);
+    }
+
+  if (c == 0 && nesting_level)
+    {
+      if (no_longjmp_on_fatal_error == 0)
+	{
+	  last_command_exit_value = EXECUTION_FAILURE;
+	  report_error (_("bad substitution: no closing `%s' in %s"), closer, string);
+	  exp_jump_to_top_level (DISCARD);
+	}
+      else
+	{
+	  *sindex = i;
+	  return (char *)NULL;
+	}
+    }
+
+  si = i - *sindex - len_closer + 1;
+  if (flags & SX_NOALLOC)
+    result = (char *)NULL;
+  else    
+    {
+      result = (char *)xmalloc (1 + si);
+      strncpy (result, string + *sindex, si);
+      result[si] = '\0';
+    }
+  *sindex = i;
+
+  return (result);
+}
+
+/* Extract a parameter expansion expression within ${ and } from STRING.
+   Obey the Posix.2 rules for finding the ending `}': count braces while
+   skipping over enclosed quoted strings and command substitutions.
+   SINDEX is the address of an int describing the current offset in STRING;
+   it should point to just after the first `{' found.  On exit, SINDEX
+   gets the position of the matching `}'.  QUOTED is non-zero if this
+   occurs inside double quotes. */
+/* XXX -- this is very similar to extract_delimited_string -- XXX */
+static char *
+extract_dollar_brace_string (string, sindex, quoted, flags)
+     char *string;
+     int *sindex, quoted, flags;
+{
+  register int i, c;
+  size_t slen;
+  int pass_character, nesting_level, si, dolbrace_state;
+  char *result, *t;
+  DECLARE_MBSTATE;
+
+  pass_character = 0;
+  nesting_level = 1;
+  slen = strlen (string + *sindex) + *sindex;
+
+  /* The handling of dolbrace_state needs to agree with the code in parse.y:
+     parse_matched_pair().  The different initial value is to handle the
+     case where this function is called to parse the word in
+     ${param op word} (SX_WORD). */
+  dolbrace_state = (flags & SX_WORD) ? DOLBRACE_WORD : DOLBRACE_PARAM;
+  if ((quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) && (flags & SX_POSIXEXP))
+    dolbrace_state = DOLBRACE_QUOTE;
+
+  i = *sindex;
+  while (c = string[i])
+    {
+      if (pass_character)
+	{
+	  pass_character = 0;
+	  ADVANCE_CHAR (string, slen, i);
+	  continue;
+	}
+
+      /* CTLESCs and backslashes quote the next character. */
+      if (c == CTLESC || c == '\\')
+	{
+	  pass_character++;
+	  i++;
+	  continue;
+	}
+
+      if (string[i] == '$' && string[i+1] == LBRACE)
+	{
+	  nesting_level++;
+	  i += 2;
+	  continue;
+	}
+
+      if (c == RBRACE)
+	{
+	  nesting_level--;
+	  if (nesting_level == 0)
+	    break;
+	  i++;
+	  continue;
+	}
+
+      /* Pass the contents of old-style command substitutions through
+	 verbatim. */
+      if (c == '`')
+	{
+	  si = i + 1;
+	  t = string_extract (string, &si, "`", flags|SX_NOALLOC);
+
+	  CHECK_STRING_OVERRUN (i, si, slen, c);
+
+	  i = si + 1;
+	  continue;
+	}
+
+      /* Pass the contents of new-style command substitutions and
+	 arithmetic substitutions through verbatim. */
+      if (string[i] == '$' && string[i+1] == LPAREN)
+	{
+	  si = i + 2;
+	  t = extract_command_subst (string, &si, flags|SX_NOALLOC);
+
+	  CHECK_STRING_OVERRUN (i, si, slen, c);
+
+	  i = si + 1;
+	  continue;
+	}
+
+#if defined (PROCESS_SUBSTITUTION)
+      /* Technically this should only work at the start of a word */
+      if ((string[i] == '<' || string[i] == '>') && string[i+1] == LPAREN)
+	{
+	  si = i + 2;
+	  t = extract_process_subst (string, (string[i] == '<' ? "<(" : ">)"), &si, flags|SX_NOALLOC);
+
+	  CHECK_STRING_OVERRUN (i, si, slen, c);
+
+	  i = si + 1;
+	  continue;
+	}
+#endif
+
+      /* Pass the contents of double-quoted strings through verbatim. */
+      if (c == '"')
+	{
+	  si = i + 1;
+	  i = skip_double_quoted (string, slen, si, 0);
+	  /* skip_XXX_quoted leaves index one past close quote */
+	  continue;
+	}
+
+      if (c == '\'')
+	{
+/*itrace("extract_dollar_brace_string: c == single quote flags = %d quoted = %d dolbrace_state = %d", flags, quoted, dolbrace_state);*/
+	  if (posixly_correct && shell_compatibility_level > 42 && dolbrace_state != DOLBRACE_QUOTE && (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)))
+	    ADVANCE_CHAR (string, slen, i);
+	  else
+	    {
+	      si = i + 1;
+	      i = skip_single_quoted (string, slen, si, 0);
+	    }
+
+          continue;
+	}
+
+#if defined (ARRAY_VARS)
+      if (c == LBRACK && dolbrace_state == DOLBRACE_PARAM)
+	{
+	  si = skipsubscript (string, i, 0);
+	  CHECK_STRING_OVERRUN (i, si, slen, c);
+	  if (string[si] == RBRACK)
+	    c = string[i = si];
+	}
+#endif
+
+      /* move past this character, which was not special. */
+      ADVANCE_CHAR (string, slen, i);
+
+      /* This logic must agree with parse.y:parse_matched_pair, since they
+	 share the same defines. */
+      if (dolbrace_state == DOLBRACE_PARAM && c == '%' && (i - *sindex) > 1)
+	dolbrace_state = DOLBRACE_QUOTE;
+      else if (dolbrace_state == DOLBRACE_PARAM && c == '#' && (i - *sindex) > 1)
+        dolbrace_state = DOLBRACE_QUOTE;
+      else if (dolbrace_state == DOLBRACE_PARAM && c == '/' && (i - *sindex) > 1)
+        dolbrace_state = DOLBRACE_QUOTE2;	/* XXX */
+      else if (dolbrace_state == DOLBRACE_PARAM && c == '^' && (i - *sindex) > 1)
+        dolbrace_state = DOLBRACE_QUOTE;
+      else if (dolbrace_state == DOLBRACE_PARAM && c == ',' && (i - *sindex) > 1)
+        dolbrace_state = DOLBRACE_QUOTE;
+      /* This is intended to handle all of the [:]op expansions and the substring/
+	 length/pattern removal/pattern substitution expansions. */
+      else if (dolbrace_state == DOLBRACE_PARAM && strchr ("#%^,~:-=?+/", c) != 0)
+	dolbrace_state = DOLBRACE_OP;
+      else if (dolbrace_state == DOLBRACE_OP && strchr ("#%^,~:-=?+/", c) == 0)
+	dolbrace_state = DOLBRACE_WORD;
+    }
+
+  if (c == 0 && nesting_level)
+    {
+      if (no_longjmp_on_fatal_error == 0)
+	{			/* { */
+	  last_command_exit_value = EXECUTION_FAILURE;
+	  report_error (_("bad substitution: no closing `%s' in %s"), "}", string);
+	  exp_jump_to_top_level (DISCARD);
+	}
+      else
+	{
+	  *sindex = i;
+	  return ((char *)NULL);
+	}
+    }
+
+  result = (flags & SX_NOALLOC) ? (char *)NULL : substring (string, *sindex, i);
+  *sindex = i;
+
+  return (result);
+}
+
+/* Remove backslashes which are quoting backquotes from STRING.  Modifies
+   STRING, and returns a pointer to it. */
+char *
+de_backslash (string)
+     char *string;
+{
+  register size_t slen;
+  register int i, j, prev_i;
+  DECLARE_MBSTATE;
+
+  slen = strlen (string);
+  i = j = 0;
+
+  /* Loop copying string[i] to string[j], i >= j. */
+  while (i < slen)
+    {
+      if (string[i] == '\\' && (string[i + 1] == '`' || string[i + 1] == '\\' ||
+			      string[i + 1] == '$'))
+	i++;
+      prev_i = i;
+      ADVANCE_CHAR (string, slen, i);
+      if (j < prev_i)
+	do string[j++] = string[prev_i++]; while (prev_i < i);
+      else
+	j = i;
+    }
+  string[j] = '\0';
+
+  return (string);
+}
+
+#if 0
+/*UNUSED*/
+/* Replace instances of \! in a string with !. */
+void
+unquote_bang (string)
+     char *string;
+{
+  register int i, j;
+  register char *temp;
+
+  temp = (char *)xmalloc (1 + strlen (string));
+
+  for (i = 0, j = 0; (temp[j] = string[i]); i++, j++)
+    {
+      if (string[i] == '\\' && string[i + 1] == '!')
+	{
+	  temp[j] = '!';
+	  i++;
+	}
+    }
+  strcpy (string, temp);
+  free (temp);
+}
+#endif
+
+#define CQ_RETURN(x) do { no_longjmp_on_fatal_error = oldjmp; return (x); } while (0)
+
+/* This function assumes s[i] == open; returns with s[ret] == close; used to
+   parse array subscripts.  FLAGS & 1 means to not attempt to skip over
+   matched pairs of quotes or backquotes, or skip word expansions; it is
+   intended to be used after expansion has been performed and during final
+   assignment parsing (see arrayfunc.c:assign_compound_array_list()) or
+   during execution by a builtin which has already undergone word expansion. */
+static int
+skip_matched_pair (string, start, open, close, flags)
+     const char *string;
+     int start, open, close, flags;
+{
+  int i, pass_next, backq, si, c, count, oldjmp;
+  size_t slen;
+  char *temp, *ss;
+  DECLARE_MBSTATE;
+
+  slen = strlen (string + start) + start;
+  oldjmp = no_longjmp_on_fatal_error;
+  no_longjmp_on_fatal_error = 1;
+
+  i = start + 1;		/* skip over leading bracket */
+  count = 1;
+  pass_next = backq = 0;
+  ss = (char *)string;
+  while (c = string[i])
+    {
+      if (pass_next)
+	{
+	  pass_next = 0;
+	  if (c == 0)
+	    CQ_RETURN(i);
+	  ADVANCE_CHAR (string, slen, i);
+	  continue;
+	}
+      else if ((flags & 1) == 0 && c == '\\')
+	{
+	  pass_next = 1;
+	  i++;
+	  continue;
+	}
+      else if (backq)
+	{
+	  if (c == '`')
+	    backq = 0;
+	  ADVANCE_CHAR (string, slen, i);
+	  continue;
+	}
+      else if ((flags & 1) == 0 && c == '`')
+	{
+	  backq = 1;
+	  i++;
+	  continue;
+	}
+      else if ((flags & 1) == 0 && c == open)
+	{
+	  count++;
+	  i++;
+	  continue;
+	}
+      else if (c == close)
+	{
+	  count--;
+	  if (count == 0)
+	    break;
+	  i++;
+	  continue;
+	}
+      else if ((flags & 1) == 0 && (c == '\'' || c == '"'))
+	{
+	  i = (c == '\'') ? skip_single_quoted (ss, slen, ++i, 0)
+			  : skip_double_quoted (ss, slen, ++i, 0);
+	  /* no increment, the skip functions increment past the closing quote. */
+	}
+      else if ((flags&1) == 0 && c == '$' && (string[i+1] == LPAREN || string[i+1] == LBRACE))
+	{
+	  si = i + 2;
+	  if (string[si] == '\0')
+	    CQ_RETURN(si);
+
+	  /* XXX - extract_command_subst here? */
+	  if (string[i+1] == LPAREN)
+	    temp = extract_delimited_string (ss, &si, "$(", "(", ")", SX_NOALLOC|SX_COMMAND); /* ) */
+	  else
+	    temp = extract_dollar_brace_string (ss, &si, 0, SX_NOALLOC);
+
+	  CHECK_STRING_OVERRUN (i, si, slen, c);
+
+	  i = si;
+	  if (string[i] == '\0')	/* don't increment i past EOS in loop */
+	    break;
+	  i++;
+	  continue;
+	}
+      else
+	ADVANCE_CHAR (string, slen, i);
+    }
+
+  CQ_RETURN(i);
+}
+
+#if defined (ARRAY_VARS)
+/* Flags has 1 as a reserved value, since skip_matched_pair uses it for
+   skipping over quoted strings and taking the first instance of the
+   closing character. */
+int
+skipsubscript (string, start, flags)
+     const char *string;
+     int start, flags;
+{
+  return (skip_matched_pair (string, start, '[', ']', flags));
+}
+#endif
+
+/* Skip characters in STRING until we find a character in DELIMS, and return
+   the index of that character.  START is the index into string at which we
+   begin.  This is similar in spirit to strpbrk, but it returns an index into
+   STRING and takes a starting index.  This little piece of code knows quite
+   a lot of shell syntax.  It's very similar to skip_double_quoted and other
+   functions of that ilk. */
+int
+skip_to_delim (string, start, delims, flags)
+     char *string;
+     int start;
+     char *delims;
+     int flags;
+{
+  int i, pass_next, backq, dquote, si, c, oldjmp;
+  int invert, skipquote, skipcmd, noprocsub, completeflag;
+  int arithexp, skipcol;
+  size_t slen;
+  char *temp, open[3];
+  DECLARE_MBSTATE;
+
+  slen = strlen (string + start) + start;
+  oldjmp = no_longjmp_on_fatal_error;
+  if (flags & SD_NOJMP)
+    no_longjmp_on_fatal_error = 1;
+  invert = (flags & SD_INVERT);
+  skipcmd = (flags & SD_NOSKIPCMD) == 0;
+  noprocsub = (flags & SD_NOPROCSUB);
+  completeflag = (flags & SD_COMPLETE) ? SX_COMPLETE : 0;
+
+  arithexp = (flags & SD_ARITHEXP);
+  skipcol = 0;
+
+  i = start;
+  pass_next = backq = dquote = 0;
+  while (c = string[i])
+    {
+      /* If this is non-zero, we should not let quote characters be delimiters
+	 and the current character is a single or double quote.  We should not
+	 test whether or not it's a delimiter until after we skip single- or
+	 double-quoted strings. */
+      skipquote = ((flags & SD_NOQUOTEDELIM) && (c == '\'' || c =='"'));
+      if (pass_next)
+	{
+	  pass_next = 0;
+	  if (c == 0)
+	    CQ_RETURN(i);
+	  ADVANCE_CHAR (string, slen, i);
+	  continue;
+	}
+      else if (c == '\\')
+	{
+	  pass_next = 1;
+	  i++;
+	  continue;
+	}
+      else if (backq)
+	{
+	  if (c == '`')
+	    backq = 0;
+	  ADVANCE_CHAR (string, slen, i);
+	  continue;
+	}
+      else if (c == '`')
+	{
+	  backq = 1;
+	  i++;
+	  continue;
+	}
+      else if (arithexp && skipcol && c == ':')
+	{
+	  skipcol--;
+	  i++;
+	  continue;
+	}
+      else if (arithexp && c == '?')
+	{
+	  skipcol++;
+	  i++;
+	  continue;
+	}
+      else if (skipquote == 0 && invert == 0 && member (c, delims))
+	break;
+      /* the usual case is to use skip_xxx_quoted, but we don't skip over double
+	 quoted strings when looking for the history expansion character as a
+	 delimiter. */
+      /* special case for programmable completion which takes place before
+         parser converts backslash-escaped single quotes between $'...' to
+         `regular' single-quoted strings. */
+      else if (completeflag && i > 0 && string[i-1] == '$' && c == '\'')
+	i = skip_single_quoted (string, slen, ++i, SX_COMPLETE);
+      else if (c == '\'')
+	i = skip_single_quoted (string, slen, ++i, 0);
+      else if (c == '"')
+	i = skip_double_quoted (string, slen, ++i, completeflag);
+      else if (c == LPAREN && arithexp)
+        {
+          si = i + 1;
+          if (string[si] == '\0')
+	    CQ_RETURN(si);
+
+	  temp = extract_delimited_string (string, &si, "(", "(", ")", SX_NOALLOC); /* ) */
+	  i = si;
+	  if (string[i] == '\0')	/* don't increment i past EOS in loop */
+	    break;
+	  i++;
+	  continue;         
+        }
+      else if (c == '$' && ((skipcmd && string[i+1] == LPAREN) || string[i+1] == LBRACE))
+	{
+	  si = i + 2;
+	  if (string[si] == '\0')
+	    CQ_RETURN(si);
+
+	  if (string[i+1] == LPAREN)
+	    temp = extract_delimited_string (string, &si, "$(", "(", ")", SX_NOALLOC|SX_COMMAND); /* ) */
+	  else
+	    temp = extract_dollar_brace_string (string, &si, 0, SX_NOALLOC);
+	  CHECK_STRING_OVERRUN (i, si, slen, c);
+	  i = si;
+	  if (string[i] == '\0')	/* don't increment i past EOS in loop */
+	    break;
+	  i++;
+	  continue;
+	}
+#if defined (PROCESS_SUBSTITUTION)
+      else if (skipcmd && noprocsub == 0 && (c == '<' || c == '>') && string[i+1] == LPAREN)
+	{
+	  si = i + 2;
+	  if (string[si] == '\0')
+	    CQ_RETURN(si);
+
+	  temp = extract_delimited_string (string, &si, (c == '<') ? "<(" : ">(", "(", ")", SX_COMMAND|SX_NOALLOC); /* )) */
+	  CHECK_STRING_OVERRUN (i, si, slen, c);
+	  i = si;
+	  if (string[i] == '\0')
+	    break;
+	  i++;
+	  continue;
+	}
+#endif /* PROCESS_SUBSTITUTION */
+#if defined (EXTENDED_GLOB)
+      else if ((flags & SD_EXTGLOB) && extended_glob && string[i+1] == LPAREN && member (c, "?*+!@"))
+	{
+	  si = i + 2;
+	  if (string[si] == '\0')
+	    CQ_RETURN(si);
+
+	  open[0] = c;
+	  open[1] = LPAREN;
+	  open[2] = '\0';
+	  temp = extract_delimited_string (string, &si, open, "(", ")", SX_NOALLOC); /* ) */
+
+	  CHECK_STRING_OVERRUN (i, si, slen, c);
+	  i = si;
+	  if (string[i] == '\0')	/* don't increment i past EOS in loop */
+	    break;
+	  i++;
+	  continue;
+	}
+#endif
+      else if ((flags & SD_GLOB) && c == LBRACK)
+	{
+	  si = i + 1;
+	  if (string[si] == '\0')
+	    CQ_RETURN(si);
+
+	  temp = extract_delimited_string (string, &si, "[", "[", "]", SX_NOALLOC); /* ] */
+
+	  i = si;
+	  if (string[i] == '\0')	/* don't increment i past EOS in loop */
+	    break;
+	  i++;
+	  continue;
+	}
+      else if ((skipquote || invert) && (member (c, delims) == 0))
+	break;
+      else
+	ADVANCE_CHAR (string, slen, i);
+    }
+
+  CQ_RETURN(i);
+}
+
+#if defined (BANG_HISTORY)
+/* Skip to the history expansion character (delims[0]), paying attention to
+   quoted strings and command and process substitution.  This is a stripped-
+   down version of skip_to_delims.  The essential difference is that this
+   resets the quoting state when starting a command substitution */
+int
+skip_to_histexp (string, start, delims, flags)
+     char *string;
+     int start;
+     char *delims;
+     int flags;
+{
+  int i, pass_next, backq, dquote, c, oldjmp;
+  int histexp_comsub, histexp_backq, old_dquote;
+  size_t slen;
+  DECLARE_MBSTATE;
+
+  slen = strlen (string + start) + start;
+  oldjmp = no_longjmp_on_fatal_error;
+  if (flags & SD_NOJMP)
+    no_longjmp_on_fatal_error = 1;
+
+  histexp_comsub = histexp_backq = old_dquote = 0;
+
+  i = start;
+  pass_next = backq = dquote = 0;
+  while (c = string[i])
+    {
+      if (pass_next)
+	{
+	  pass_next = 0;
+	  if (c == 0)
+	    CQ_RETURN(i);
+	  ADVANCE_CHAR (string, slen, i);
+	  continue;
+	}
+      else if (c == '\\')
+	{
+	  pass_next = 1;
+	  i++;
+	  continue;
+	}
+      else if (backq && c == '`')
+	{
+	  backq = 0;
+	  histexp_backq--;
+	  dquote = old_dquote;
+	  i++;
+	  continue;
+	}
+      else if (c == '`')
+	{
+	  backq = 1;
+	  histexp_backq++;
+	  old_dquote = dquote;		/* simple - one level for now */
+	  dquote = 0;
+	  i++;
+	  continue;
+	}
+      /* When in double quotes, act as if the double quote is a member of
+	 history_no_expand_chars, like the history library does */
+      else if (dquote && c == delims[0] && string[i+1] == '"')
+	{
+	  i++;
+	  continue;
+	}
+      else if (c == delims[0])
+	break;
+      /* the usual case is to use skip_xxx_quoted, but we don't skip over double
+	 quoted strings when looking for the history expansion character as a
+	 delimiter. */
+      else if (dquote && c == '\'')
+        {
+          i++;
+          continue;
+        }
+      else if (c == '\'')
+	i = skip_single_quoted (string, slen, ++i, 0);
+      /* The posixly_correct test makes posix-mode shells allow double quotes
+	 to quote the history expansion character */
+      else if (posixly_correct == 0 && c == '"')
+	{
+	  dquote = 1 - dquote;
+	  i++;
+	  continue;
+	}     
+      else if (c == '"')
+	i = skip_double_quoted (string, slen, ++i, 0);
+#if defined (PROCESS_SUBSTITUTION)
+      else if ((c == '$' || c == '<' || c == '>') && string[i+1] == LPAREN && string[i+2] != LPAREN)
+#else
+      else if (c == '$' && string[i+1] == LPAREN && string[i+2] != LPAREN)
+#endif
+        {
+	  if (string[i+2] == '\0')
+	    CQ_RETURN(i+2);
+	  i += 2;
+	  histexp_comsub++;
+	  old_dquote = dquote;
+	  dquote = 0;
+        }
+      else if (histexp_comsub && c == RPAREN)
+	{
+	  histexp_comsub--;
+	  dquote = old_dquote;
+	  i++;
+	  continue;
+	}
+      else if (backq)		/* placeholder */
+	{
+	  ADVANCE_CHAR (string, slen, i);
+	  continue;
+	}
+      else
+	ADVANCE_CHAR (string, slen, i);
+    }
+
+  CQ_RETURN(i);
+}
+#endif /* BANG_HISTORY */
+
+#if defined (READLINE)
+/* Return 1 if the portion of STRING ending at EINDEX is quoted (there is
+   an unclosed quoted string), or if the character at EINDEX is quoted
+   by a backslash. NO_LONGJMP_ON_FATAL_ERROR is used to flag that the various
+   single and double-quoted string parsing functions should not return an
+   error if there are unclosed quotes or braces.  The characters that this
+   recognizes need to be the same as the contents of
+   rl_completer_quote_characters. */
+
+int
+char_is_quoted (string, eindex)
+     char *string;
+     int eindex;
+{
+  int i, pass_next, c, oldjmp;
+  size_t slen;
+  DECLARE_MBSTATE;
+
+  slen = strlen (string);
+  oldjmp = no_longjmp_on_fatal_error;
+  no_longjmp_on_fatal_error = 1;
+  i = pass_next = 0;
+  while (i <= eindex)
+    {
+      c = string[i];
+
+      if (pass_next)
+	{
+	  pass_next = 0;
+	  if (i >= eindex)	/* XXX was if (i >= eindex - 1) */
+	    CQ_RETURN(1);
+	  ADVANCE_CHAR (string, slen, i);
+	  continue;
+	}
+      else if (c == '\\')
+	{
+	  pass_next = 1;
+	  i++;
+	  continue;
+	}
+      else if (c == '$' && string[i+1] == '\'' && string[i+2])
+	{
+	  i += 2;
+	  i = skip_single_quoted (string, slen, i, SX_COMPLETE);
+	  if (i > eindex)
+	    CQ_RETURN (i);
+	}
+      else if (c == '\'' || c == '"')
+	{
+	  i = (c == '\'') ? skip_single_quoted (string, slen, ++i, 0)
+			  : skip_double_quoted (string, slen, ++i, SX_COMPLETE);
+	  if (i > eindex)
+	    CQ_RETURN(1);
+	  /* no increment, the skip_xxx functions go one past end */
+	}
+      else
+	ADVANCE_CHAR (string, slen, i);
+    }
+
+  CQ_RETURN(0);
+}
+
+int
+unclosed_pair (string, eindex, openstr)
+     char *string;
+     int eindex;
+     char *openstr;
+{
+  int i, pass_next, openc, olen;
+  size_t slen;
+  DECLARE_MBSTATE;
+
+  slen = strlen (string);
+  olen = strlen (openstr);
+  i = pass_next = openc = 0;
+  while (i <= eindex)
+    {
+      if (pass_next)
+	{
+	  pass_next = 0;
+	  if (i >= eindex)	/* XXX was if (i >= eindex - 1) */
+	    return 0;
+	  ADVANCE_CHAR (string, slen, i);
+	  continue;
+	}
+      else if (string[i] == '\\')
+	{
+	  pass_next = 1;
+	  i++;
+	  continue;
+	}
+      else if (STREQN (string + i, openstr, olen))
+	{
+	  openc = 1 - openc;
+	  i += olen;
+	}
+      /* XXX - may want to handle $'...' specially here */
+      else if (string[i] == '\'' || string[i] == '"')
+	{
+	  i = (string[i] == '\'') ? skip_single_quoted (string, slen, i, 0)
+				  : skip_double_quoted (string, slen, i, SX_COMPLETE);
+	  if (i > eindex)
+	    return 0;
+	}
+      else
+	ADVANCE_CHAR (string, slen, i);
+    }
+  return (openc);
+}
+
+/* Split STRING (length SLEN) at DELIMS, and return a WORD_LIST with the
+   individual words.  If DELIMS is NULL, the current value of $IFS is used
+   to split the string, and the function follows the shell field splitting
+   rules.  SENTINEL is an index to look for.  NWP, if non-NULL,
+   gets the number of words in the returned list.  CWP, if non-NULL, gets
+   the index of the word containing SENTINEL.  Non-whitespace chars in
+   DELIMS delimit separate fields.  This is used by programmable completion. */
+WORD_LIST *
+split_at_delims (string, slen, delims, sentinel, flags, nwp, cwp)
+     char *string;
+     int slen;
+     char *delims;
+     int sentinel, flags;
+     int *nwp, *cwp;
+{
+  int ts, te, i, nw, cw, ifs_split, dflags;
+  char *token, *d, *d2;
+  WORD_LIST *ret, *tl;
+
+  if (string == 0 || *string == '\0')
+    {
+      if (nwp)
+	*nwp = 0;
+      if (cwp)
+	*cwp = 0;	
+      return ((WORD_LIST *)NULL);
+    }
+
+  d = (delims == 0) ? ifs_value : delims;
+  ifs_split = delims == 0;
+
+  /* Make d2 the non-whitespace characters in delims */
+  d2 = 0;
+  if (delims)
+    {
+      size_t slength;
+#if defined (HANDLE_MULTIBYTE)
+      size_t mblength = 1;
+#endif
+      DECLARE_MBSTATE;
+
+      slength = strlen (delims);
+      d2 = (char *)xmalloc (slength + 1);
+      i = ts = 0;
+      while (delims[i])
+	{
+#if defined (HANDLE_MULTIBYTE)
+	  mbstate_t state_bak;
+	  state_bak = state;
+	  mblength = MBRLEN (delims + i, slength, &state);
+	  if (MB_INVALIDCH (mblength))
+	    state = state_bak;
+	  else if (mblength > 1)
+	    {
+	      memcpy (d2 + ts, delims + i, mblength);
+	      ts += mblength;
+	      i += mblength;
+	      slength -= mblength;
+	      continue;
+	    }
+#endif
+	  if (whitespace (delims[i]) == 0)
+	    d2[ts++] = delims[i];
+
+	  i++;
+	  slength--;
+	}
+      d2[ts] = '\0';
+    }
+
+  ret = (WORD_LIST *)NULL;
+
+  /* Remove sequences of whitespace characters at the start of the string, as
+     long as those characters are delimiters. */
+  for (i = 0; member (string[i], d) && spctabnl (string[i]); i++)
+    ;
+  if (string[i] == '\0')
+    {
+      FREE (d2);
+      return (ret);
+    }
+
+  ts = i;
+  nw = 0;
+  cw = -1;
+  dflags = flags|SD_NOJMP;
+  while (1)
+    {
+      te = skip_to_delim (string, ts, d, dflags);
+
+      /* If we have a non-whitespace delimiter character, use it to make a
+	 separate field.  This is just about what $IFS splitting does and
+	 is closer to the behavior of the shell parser. */
+      if (ts == te && d2 && member (string[ts], d2))
+	{
+	  te = ts + 1;
+	  /* If we're using IFS splitting, the non-whitespace delimiter char
+	     and any additional IFS whitespace delimits a field. */
+	  if (ifs_split)
+	    while (member (string[te], d) && spctabnl (string[te]) && ((flags&SD_NOQUOTEDELIM) == 0 || (string[te] != '\'' && string[te] != '"')))
+	      te++;
+	  else
+	    while (member (string[te], d2) && ((flags&SD_NOQUOTEDELIM) == 0 || (string[te] != '\'' && string[te] != '"')))
+	      te++;
+	}
+
+      token = substring (string, ts, te);
+
+      ret = add_string_to_list (token, ret);	/* XXX */
+      free (token);
+      nw++;
+
+      if (sentinel >= ts && sentinel <= te)
+	cw = nw;
+
+      /* If the cursor is at whitespace just before word start, set the
+	 sentinel word to the current word. */
+      if (cwp && cw == -1 && sentinel == ts-1)
+	cw = nw;
+
+      /* If the cursor is at whitespace between two words, make a new, empty
+	 word, add it before (well, after, since the list is in reverse order)
+	 the word we just added, and set the current word to that one. */
+      if (cwp && cw == -1 && sentinel < ts)
+	{
+	  tl = make_word_list (make_word (""), ret->next);
+	  ret->next = tl;
+	  cw = nw;
+	  nw++;
+	}
+
+      if (string[te] == 0)
+	break;
+
+      i = te;
+      /* XXX - honor SD_NOQUOTEDELIM here */
+      while (member (string[i], d) && (ifs_split || spctabnl(string[i])) && ((flags&SD_NOQUOTEDELIM) == 0 || (string[te] != '\'' && string[te] != '"')))
+	i++;
+
+      if (string[i])
+	ts = i;
+      else
+	break;
+    }
+
+  /* Special case for SENTINEL at the end of STRING.  If we haven't found
+     the word containing SENTINEL yet, and the index we're looking for is at
+     the end of STRING (or past the end of the previously-found token,
+     possible if the end of the line is composed solely of IFS whitespace)
+     add an additional null argument and set the current word pointer to that. */
+  if (cwp && cw == -1 && (sentinel >= slen || sentinel >= te))
+    {
+      if (whitespace (string[sentinel - 1]))
+	{
+	  token = "";
+	  ret = add_string_to_list (token, ret);
+	  nw++;
+	}
+      cw = nw;
+    }
+
+  if (nwp)
+    *nwp = nw;
+  if (cwp)
+    *cwp = cw;
+
+  FREE (d2);
+
+  return (REVERSE_LIST (ret, WORD_LIST *));
+}
+#endif /* READLINE */
+
+#if 0
+/* UNUSED */
+/* Extract the name of the variable to bind to from the assignment string. */
+char *
+assignment_name (string)
+     char *string;
+{
+  int offset;
+  char *temp;
+
+  offset = assignment (string, 0);
+  if (offset == 0)
+    return (char *)NULL;
+  temp = substring (string, 0, offset);
+  return (temp);
+}
+#endif
+
+/* **************************************************************** */
+/*								    */
+/*     Functions to convert strings to WORD_LISTs and vice versa    */
+/*								    */
+/* **************************************************************** */
+
+/* Return a single string of all the words in LIST.  SEP is the separator
+   to put between individual elements of LIST in the output string. */
+char *
+string_list_internal (list, sep)
+     WORD_LIST *list;
+     char *sep;
+{
+  register WORD_LIST *t;
+  char *result, *r;
+  size_t word_len, sep_len, result_size;
+
+  if (list == 0)
+    return ((char *)NULL);
+
+  /* Short-circuit quickly if we don't need to separate anything. */
+  if (list->next == 0)
+    return (savestring (list->word->word));
+
+  /* This is nearly always called with either sep[0] == 0 or sep[1] == 0. */
+  sep_len = STRLEN (sep);
+  result_size = 0;
+
+  for (t = list; t; t = t->next)
+    {
+      if (t != list)
+	result_size += sep_len;
+      result_size += strlen (t->word->word);
+    }
+
+  r = result = (char *)xmalloc (result_size + 1);
+
+  for (t = list; t; t = t->next)
+    {
+      if (t != list && sep_len)
+	{
+	  if (sep_len > 1)
+	    {
+	      FASTCOPY (sep, r, sep_len);
+	      r += sep_len;
+	    }
+	  else
+	    *r++ = sep[0];
+	}
+
+      word_len = strlen (t->word->word);
+      FASTCOPY (t->word->word, r, word_len);
+      r += word_len;
+    }
+
+  *r = '\0';
+  return (result);
+}
+
+/* Return a single string of all the words present in LIST, separating
+   each word with a space. */
+char *
+string_list (list)
+     WORD_LIST *list;
+{
+  return (string_list_internal (list, " "));
+}
+
+/* An external interface that can be used by the rest of the shell to
+   obtain a string containing the first character in $IFS.  Handles all
+   the multibyte complications.  If LENP is non-null, it is set to the
+   length of the returned string. */
+char *
+ifs_firstchar (lenp)
+     int *lenp;
+{
+  char *ret;
+  int len;
+
+  ret = xmalloc (MB_LEN_MAX + 1);
+#if defined (HANDLE_MULTIBYTE)
+  if (ifs_firstc_len == 1)
+    {
+      ret[0] = ifs_firstc[0];
+      ret[1] = '\0';
+      len = ret[0] ? 1 : 0;
+    }
+  else
+    {
+      memcpy (ret, ifs_firstc, ifs_firstc_len);
+      ret[len = ifs_firstc_len] = '\0';
+    }
+#else
+  ret[0] = ifs_firstc;
+  ret[1] = '\0';
+  len = ret[0] ? 0 : 1;
+#endif
+
+  if (lenp)
+    *lenp = len;
+
+  return ret;
+}
+
+/* Return a single string of all the words present in LIST, obeying the
+   quoting rules for "$*", to wit: (P1003.2, draft 11, 3.5.2) "If the
+   expansion [of $*] appears within a double quoted string, it expands
+   to a single field with the value of each parameter separated by the
+   first character of the IFS variable, or by a <space> if IFS is unset." */
+/* Posix interpretation 888 changes this when IFS is null by specifying
+   that when unquoted, this expands to separate arguments */
+char *
+string_list_dollar_star (list, quoted, flags)
+     WORD_LIST *list;
+     int quoted, flags;
+{
+  char *ret;
+#if defined (HANDLE_MULTIBYTE)
+#  if defined (__GNUC__)
+  char sep[MB_CUR_MAX + 1];
+#  else
+  char *sep = 0;
+#  endif
+#else
+  char sep[2];
+#endif
+
+#if defined (HANDLE_MULTIBYTE)
+#  if !defined (__GNUC__)
+  sep = (char *)xmalloc (MB_CUR_MAX + 1);
+#  endif /* !__GNUC__ */
+  if (ifs_firstc_len == 1)
+    {
+      sep[0] = ifs_firstc[0];
+      sep[1] = '\0';
+    }
+  else
+    {
+      memcpy (sep, ifs_firstc, ifs_firstc_len);
+      sep[ifs_firstc_len] = '\0';
+    }
+#else
+  sep[0] = ifs_firstc;
+  sep[1] = '\0';
+#endif
+
+  ret = string_list_internal (list, sep);
+#if defined (HANDLE_MULTIBYTE) && !defined (__GNUC__)
+  free (sep);
+#endif
+  return ret;
+}
+
+/* Turn $@ into a string.  If (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES))
+   is non-zero, the $@ appears within double quotes, and we should quote
+   the list before converting it into a string.  If IFS is unset, and the
+   word is not quoted, we just need to quote CTLESC and CTLNUL characters
+   in the words in the list, because the default value of $IFS is
+   <space><tab><newline>, IFS characters in the words in the list should
+   also be split.  If IFS is null, and the word is not quoted, we need
+   to quote the words in the list to preserve the positional parameters
+   exactly.
+   Valid values for the FLAGS argument are the PF_ flags in command.h,
+   the only one we care about is PF_ASSIGNRHS.  $@ is supposed to expand
+   to the positional parameters separated by spaces no matter what IFS is
+   set to if in a context where word splitting is not performed.  The only
+   one that we didn't handle before is assignment statement arguments to
+   declaration builtins like `declare'. */
+char *
+string_list_dollar_at (list, quoted, flags)
+     WORD_LIST *list;
+     int quoted;
+     int flags;
+{
+  char *ifs, *ret;
+#if defined (HANDLE_MULTIBYTE)
+#  if defined (__GNUC__)
+  char sep[MB_CUR_MAX + 1];
+#  else
+  char *sep = 0;
+#  endif /* !__GNUC__ */
+#else
+  char sep[2];
+#endif
+  WORD_LIST *tlist;
+
+  /* XXX this could just be ifs = ifs_value; */
+  ifs = ifs_var ? value_cell (ifs_var) : (char *)0;
+
+#if defined (HANDLE_MULTIBYTE)
+#  if !defined (__GNUC__)
+  sep = (char *)xmalloc (MB_CUR_MAX + 1);
+#  endif /* !__GNUC__ */
+  /* XXX - testing PF_ASSIGNRHS to make sure positional parameters are
+     separated with a space even when word splitting will not occur. */
+  if (flags & PF_ASSIGNRHS)
+    {
+      sep[0] = ' ';
+      sep[1] = '\0';
+    }
+  else if (ifs && *ifs)
+    {
+      if (ifs_firstc_len == 1)
+	{
+	  sep[0] = ifs_firstc[0];
+	  sep[1] = '\0';
+	}
+      else
+	{
+	  memcpy (sep, ifs_firstc, ifs_firstc_len);
+	  sep[ifs_firstc_len] = '\0';
+	}
+    }
+  else
+    {
+      sep[0] = ' ';
+      sep[1] = '\0';
+    }
+#else	/* !HANDLE_MULTIBYTE */
+  /* XXX - PF_ASSIGNRHS means no word splitting, so we want positional
+     parameters separated by a space. */
+  sep[0] = ((flags & PF_ASSIGNRHS) || ifs == 0 || *ifs == 0) ? ' ' : *ifs;
+  sep[1] = '\0';
+#endif	/* !HANDLE_MULTIBYTE */
+
+  /* XXX -- why call quote_list if ifs == 0?  we can get away without doing
+     it now that quote_escapes quotes spaces */
+  tlist = (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES|Q_PATQUOTE))
+		? quote_list (list)
+		: list_quote_escapes (list);
+
+  ret = string_list_internal (tlist, sep);
+#if defined (HANDLE_MULTIBYTE) && !defined (__GNUC__)
+  free (sep);
+#endif
+  return ret;
+}
+
+/* Turn the positional parameters into a string, understanding quoting and
+   the various subtleties of using the first character of $IFS as the
+   separator.  Calls string_list_dollar_at, string_list_dollar_star, and
+   string_list as appropriate. */
+/* This needs to fully understand the additional contexts where word
+   splitting does not occur (W_ASSIGNRHS, etc.) */
+char *
+string_list_pos_params (pchar, list, quoted, pflags)
+     int pchar;
+     WORD_LIST *list;
+     int quoted, pflags;
+{
+  char *ret;
+  WORD_LIST *tlist;
+
+  if (pchar == '*' && (quoted & Q_DOUBLE_QUOTES))
+    {
+      tlist = quote_list (list);
+      word_list_remove_quoted_nulls (tlist);
+      ret = string_list_dollar_star (tlist, 0, 0);
+    }
+  else if (pchar == '*' && (quoted & Q_HERE_DOCUMENT))
+    {
+      tlist = quote_list (list);
+      word_list_remove_quoted_nulls (tlist);
+      ret = string_list (tlist);
+    }
+  else if (pchar == '*' && quoted == 0 && ifs_is_null)	/* XXX */
+    ret = expand_no_split_dollar_star ? string_list_dollar_star (list, quoted, 0) : string_list_dollar_at (list, quoted, 0);	/* Posix interp 888 */
+  else if (pchar == '*' && quoted == 0 && (pflags & PF_ASSIGNRHS))	/* XXX */
+    ret = expand_no_split_dollar_star ? string_list_dollar_star (list, quoted, 0) : string_list_dollar_at (list, quoted, 0);	/* Posix interp 888 */
+  else if (pchar == '*')
+    {
+      /* Even when unquoted, string_list_dollar_star does the right thing
+	 making sure that the first character of $IFS is used as the
+	 separator. */
+      ret = string_list_dollar_star (list, quoted, 0);
+    }
+  else if (pchar == '@' && (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)))
+    /* We use string_list_dollar_at, but only if the string is quoted, since
+       that quotes the escapes if it's not, which we don't want.  We could
+       use string_list (the old code did), but that doesn't do the right
+       thing if the first character of $IFS is not a space.  We use
+       string_list_dollar_star if the string is unquoted so we make sure that
+       the elements of $@ are separated by the first character of $IFS for
+       later splitting. */
+    ret = string_list_dollar_at (list, quoted, 0);
+  else if (pchar == '@' && quoted == 0 && ifs_is_null)	/* XXX */
+    ret = string_list_dollar_at (list, quoted, 0);	/* Posix interp 888 */
+  else if (pchar == '@' && quoted == 0 && (pflags & PF_ASSIGNRHS))
+    ret = string_list_dollar_at (list, quoted, pflags);	/* Posix interp 888 */
+  else if (pchar == '@')
+    ret = string_list_dollar_star (list, quoted, 0);
+  else
+    ret = string_list ((quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) ? quote_list (list) : list);
+
+  return ret;
+}
+
+/* Return the list of words present in STRING.  Separate the string into
+   words at any of the characters found in SEPARATORS.  If QUOTED is
+   non-zero then word in the list will have its quoted flag set, otherwise
+   the quoted flag is left as make_word () deemed fit.
+
+   This obeys the P1003.2 word splitting semantics.  If `separators' is
+   exactly <space><tab><newline>, then the splitting algorithm is that of
+   the Bourne shell, which treats any sequence of characters from `separators'
+   as a delimiter.  If IFS is unset, which results in `separators' being set
+   to "", no splitting occurs.  If separators has some other value, the
+   following rules are applied (`IFS white space' means zero or more
+   occurrences of <space>, <tab>, or <newline>, as long as those characters
+   are in `separators'):
+
+	1) IFS white space is ignored at the start and the end of the
+	   string.
+	2) Each occurrence of a character in `separators' that is not
+	   IFS white space, along with any adjacent occurrences of
+	   IFS white space delimits a field.
+	3) Any nonzero-length sequence of IFS white space delimits a field.
+   */
+
+/* BEWARE!  list_string strips null arguments.  Don't call it twice and
+   expect to have "" preserved! */
+
+/* This performs word splitting and quoted null character removal on
+   STRING. */
+#define issep(c) \
+	(((separators)[0]) ? ((separators)[1] ? isifs(c) \
+					      : (c) == (separators)[0]) \
+			   : 0)
+
+/* member of the space character class in the current locale */
+#define ifs_whitespace(c)	ISSPACE(c)
+
+/* "adjacent IFS white space" */
+#define ifs_whitesep(c)	((sh_style_split || separators == 0) ? spctabnl (c) \
+							     : ifs_whitespace (c))
+
+WORD_LIST *
+list_string (string, separators, quoted)
+     register char *string, *separators;
+     int quoted;
+{
+  WORD_LIST *result;
+  WORD_DESC *t;
+  char *current_word, *s;
+  int sindex, sh_style_split, whitesep, xflags, free_word;
+  size_t slen;
+
+  if (!string || !*string)
+    return ((WORD_LIST *)NULL);
+
+  sh_style_split = separators && separators[0] == ' ' &&
+				 separators[1] == '\t' &&
+				 separators[2] == '\n' &&
+				 separators[3] == '\0';
+  for (xflags = 0, s = ifs_value; s && *s; s++)
+    {
+      if (*s == CTLESC) xflags |= SX_NOCTLESC;
+      else if (*s == CTLNUL) xflags |= SX_NOESCCTLNUL;
+    }
+
+  slen = 0;
+  /* Remove sequences of whitespace at the beginning of STRING, as
+     long as those characters appear in IFS.  Do not do this if
+     STRING is quoted or if there are no separator characters. We use the
+     Posix definition of whitespace as a member of the space character
+     class in the current locale. */
+#if 0
+  if (!quoted || !separators || !*separators)
+#else
+  /* issep() requires that separators be non-null, and always returns 0 if
+     separator is the empty string, so don't bother if we get an empty string
+     for separators. We already returned NULL above if STRING is empty. */
+  if (!quoted && separators && *separators)
+#endif
+    {
+      for (s = string; *s && issep (*s) && ifs_whitespace (*s); s++);
+
+      if (!*s)
+	return ((WORD_LIST *)NULL);
+
+      string = s;
+    }
+
+  /* OK, now STRING points to a word that does not begin with white space.
+     The splitting algorithm is:
+	extract a word, stopping at a separator
+	skip sequences of whitespace characters as long as they are separators
+     This obeys the field splitting rules in Posix.2. */
+  slen = STRLEN (string);
+  for (result = (WORD_LIST *)NULL, sindex = 0; string[sindex]; )
+    {
+      /* Don't need string length in ADVANCE_CHAR unless multibyte chars are
+	 possible, but need it in string_extract_verbatim for bounds checking */
+      current_word = string_extract_verbatim (string, slen, &sindex, separators, xflags);
+      if (current_word == 0)
+	break;
+
+      free_word = 1;	/* If non-zero, we free current_word */
+
+      /* If we have a quoted empty string, add a quoted null argument.  We
+	 want to preserve the quoted null character iff this is a quoted
+	 empty string; otherwise the quoted null characters are removed
+	 below. */
+      if (QUOTED_NULL (current_word))
+	{
+	  t = alloc_word_desc ();
+	  t->word = make_quoted_char ('\0');
+	  t->flags |= W_QUOTED|W_HASQUOTEDNULL;
+	  result = make_word_list (t, result);
+	}
+      else if (current_word[0] != '\0')
+	{
+	  /* If we have something, then add it regardless.  However,
+	     perform quoted null character removal on the current word. */
+	  remove_quoted_nulls (current_word);
+
+	  /* We don't want to set the word flags based on the string contents
+	     here -- that's mostly for the parser -- so we just allocate a
+	     WORD_DESC *, assign current_word (noting that we don't want to
+	     free it), and skip all of make_word. */
+	  t = alloc_word_desc ();
+	  t->word = current_word;
+	  result = make_word_list (t, result);
+	  free_word = 0;
+	  result->word->flags &= ~W_HASQUOTEDNULL;	/* just to be sure */
+	  if (quoted & (Q_DOUBLE_QUOTES|Q_HERE_DOCUMENT))
+	    result->word->flags |= W_QUOTED;
+	  /* If removing quoted null characters leaves an empty word, note
+	     that we saw this for the caller to act on. */
+	  if (current_word == 0 || current_word[0] == '\0')
+	    result->word->flags |= W_SAWQUOTEDNULL;
+	}
+
+      /* If we're not doing sequences of separators in the traditional
+	 Bourne shell style, then add a quoted null argument. */
+      else if (!sh_style_split && !ifs_whitespace (string[sindex]))
+	{
+	  t = alloc_word_desc ();
+	  t->word = make_quoted_char ('\0');
+	  t->flags |= W_QUOTED|W_HASQUOTEDNULL;
+	  result = make_word_list (t, result);
+	}
+
+      if (free_word)
+	free (current_word);
+
+      /* Note whether or not the separator is IFS whitespace, used later. */
+      whitesep = string[sindex] && ifs_whitesep (string[sindex]);
+
+      /* Move past the current separator character. */
+      if (string[sindex])
+	{
+	  DECLARE_MBSTATE;
+	  ADVANCE_CHAR (string, slen, sindex);
+	}
+
+      /* Now skip sequences of whitespace characters if they are
+	 in the list of separators. */
+      while (string[sindex] && ifs_whitesep (string[sindex]) && issep (string[sindex]))
+	sindex++;
+
+      /* If the first separator was IFS whitespace and the current character
+	 is a non-whitespace IFS character, it should be part of the current
+	 field delimiter, not a separate delimiter that would result in an
+	 empty field.  Look at POSIX.2, 3.6.5, (3)(b). */
+      if (string[sindex] && whitesep && issep (string[sindex]) && !ifs_whitesep (string[sindex]))
+	{
+	  sindex++;
+	  /* An IFS character that is not IFS white space, along with any
+	     adjacent IFS white space, shall delimit a field. (SUSv3) */
+	  while (string[sindex] && ifs_whitesep (string[sindex]) && isifs (string[sindex]))
+	    sindex++;
+	}
+    }
+  return (REVERSE_LIST (result, WORD_LIST *));
+}
+
+/* Parse a single word from STRING, using SEPARATORS to separate fields.
+   ENDPTR is set to the first character after the word.  This is used by
+   the `read' builtin.
+   
+   This is never called with SEPARATORS != $IFS, and takes advantage of that.
+
+   XXX - this function is very similar to list_string; they should be
+	 combined - XXX */
+
+/* character is in $IFS */
+#define islocalsep(c)	(local_cmap[(unsigned char)(c)] != 0)
+
+char *
+get_word_from_string (stringp, separators, endptr)
+     char **stringp, *separators, **endptr;
+{
+  register char *s;
+  char *current_word;
+  int sindex, sh_style_split, whitesep, xflags;
+  unsigned char local_cmap[UCHAR_MAX+1];	/* really only need single-byte chars here */
+  size_t slen;
+
+  if (!stringp || !*stringp || !**stringp)
+    return ((char *)NULL);
+
+  sh_style_split = separators && separators[0] == ' ' &&
+				 separators[1] == '\t' &&
+				 separators[2] == '\n' &&
+				 separators[3] == '\0';
+  memset (local_cmap, '\0', sizeof (local_cmap));
+  for (xflags = 0, s = separators; s && *s; s++)
+    {
+      if (*s == CTLESC) xflags |= SX_NOCTLESC;
+      if (*s == CTLNUL) xflags |= SX_NOESCCTLNUL;
+      local_cmap[(unsigned char)*s] = 1;	/* local charmap of separators */
+    }
+
+  s = *stringp;
+  slen = 0;
+
+  /* Remove sequences of whitespace at the beginning of STRING, as
+     long as those characters appear in SEPARATORS.  This happens if
+     SEPARATORS == $' \t\n' or if IFS is unset. */
+  if (sh_style_split || separators == 0)
+    for (; *s && spctabnl (*s) && islocalsep (*s); s++);
+  else
+    for (; *s && ifs_whitespace (*s) && islocalsep (*s); s++);
+
+  /* If the string is nothing but whitespace, update it and return. */
+  if (!*s)
+    {
+      *stringp = s;
+      if (endptr)
+	*endptr = s;
+      return ((char *)NULL);
+    }
+
+  /* OK, S points to a word that does not begin with white space.
+     Now extract a word, stopping at a separator, save a pointer to
+     the first character after the word, then skip sequences of spc,
+     tab, or nl as long as they are separators.
+
+     This obeys the field splitting rules in Posix.2. */
+  sindex = 0;
+  /* Don't need string length in ADVANCE_CHAR unless multibyte chars are
+     possible, but need it in string_extract_verbatim for bounds checking */
+  slen = STRLEN (s);
+  current_word = string_extract_verbatim (s, slen, &sindex, separators, xflags);
+
+  /* Set ENDPTR to the first character after the end of the word. */
+  if (endptr)
+    *endptr = s + sindex;
+
+  /* Note whether or not the separator is IFS whitespace, used later. */
+  whitesep = s[sindex] && ifs_whitesep (s[sindex]);
+
+  /* Move past the current separator character. */
+  if (s[sindex])
+    {
+      DECLARE_MBSTATE;
+      ADVANCE_CHAR (s, slen, sindex);
+    }
+
+  /* Now skip sequences of space, tab, or newline characters if they are
+     in the list of separators. */
+  while (s[sindex] && spctabnl (s[sindex]) && islocalsep (s[sindex]))
+    sindex++;
+
+  /* If the first separator was IFS whitespace and the current character is
+     a non-whitespace IFS character, it should be part of the current field
+     delimiter, not a separate delimiter that would result in an empty field.
+     Look at POSIX.2, 3.6.5, (3)(b). */
+  if (s[sindex] && whitesep && islocalsep (s[sindex]) && !ifs_whitesep (s[sindex]))
+    {
+      sindex++;
+      /* An IFS character that is not IFS white space, along with any adjacent
+	 IFS white space, shall delimit a field. */
+      while (s[sindex] && ifs_whitesep (s[sindex]) && islocalsep(s[sindex]))
+	sindex++;
+    }
+
+  /* Update STRING to point to the next field. */
+  *stringp = s + sindex;
+  return (current_word);
+}
+
+/* Remove IFS white space at the end of STRING.  Start at the end
+   of the string and walk backwards until the beginning of the string
+   or we find a character that's not IFS white space and not CTLESC.
+   Only let CTLESC escape a white space character if SAW_ESCAPE is
+   non-zero.  */
+char *
+strip_trailing_ifs_whitespace (string, separators, saw_escape)
+     char *string, *separators;
+     int saw_escape;
+{
+  char *s;
+
+  s = string + STRLEN (string) - 1;
+  while (s > string && ((spctabnl (*s) && isifs (*s)) ||
+			(saw_escape && *s == CTLESC && spctabnl (s[1]))))
+    s--;
+  *++s = '\0';
+  return string;
+}
+
+#if 0
+/* UNUSED */
+/* Split STRING into words at whitespace.  Obeys shell-style quoting with
+   backslashes, single and double quotes. */
+WORD_LIST *
+list_string_with_quotes (string)
+     char *string;
+{
+  WORD_LIST *list;
+  char *token, *s;
+  size_t s_len;
+  int c, i, tokstart, len;
+
+  for (s = string; s && *s && spctabnl (*s); s++)
+    ;
+  if (s == 0 || *s == 0)
+    return ((WORD_LIST *)NULL);
+
+  s_len = strlen (s);
+  tokstart = i = 0;
+  list = (WORD_LIST *)NULL;
+  while (1)
+    {
+      c = s[i];
+      if (c == '\\')
+	{
+	  i++;
+	  if (s[i])
+	    i++;
+	}
+      else if (c == '\'')
+	i = skip_single_quoted (s, s_len, ++i, 0);
+      else if (c == '"')
+	i = skip_double_quoted (s, s_len, ++i, 0);
+      else if (c == 0 || spctabnl (c))
+	{
+	  /* We have found the end of a token.  Make a word out of it and
+	     add it to the word list. */
+	  token = substring (s, tokstart, i);
+	  list = add_string_to_list (token, list);
+	  free (token);
+	  while (spctabnl (s[i]))
+	    i++;
+	  if (s[i])
+	    tokstart = i;
+	  else
+	    break;
+	}
+      else
+	i++;	/* normal character */
+    }
+  return (REVERSE_LIST (list, WORD_LIST *));
+}
+#endif
+
+/********************************************************/
+/*							*/
+/*	Functions to perform assignment statements	*/
+/*							*/
+/********************************************************/
+
+#if defined (ARRAY_VARS)
+static SHELL_VAR *
+do_compound_assignment (name, value, flags)
+     char *name, *value;
+     int flags;
+{
+  SHELL_VAR *v;
+  int mklocal, mkassoc, mkglobal, chklocal;
+  WORD_LIST *list;
+  char *newname;	/* used for local nameref references */
+
+  mklocal = flags & ASS_MKLOCAL;
+  mkassoc = flags & ASS_MKASSOC;
+  mkglobal = flags & ASS_MKGLOBAL;
+  chklocal = flags & ASS_CHKLOCAL;
+
+  if (mklocal && variable_context)
+    {
+      v = find_variable (name);		/* follows namerefs */
+      newname = (v == 0) ? nameref_transform_name (name, flags) : v->name;
+      if (v && ((readonly_p (v) && (flags & ASS_FORCE) == 0) || noassign_p (v)))
+	{
+	  if (readonly_p (v))
+	    err_readonly (name);
+	  return (v);	/* XXX */
+	}
+      list = expand_compound_array_assignment (v, value, flags);
+      if (mkassoc)
+	v = make_local_assoc_variable (newname, 0);
+      else if (v == 0 || (array_p (v) == 0 && assoc_p (v) == 0) || v->context != variable_context)
+        v = make_local_array_variable (newname, 0);
+      if (v)
+	assign_compound_array_list (v, list, flags);
+      if (list)
+	dispose_words (list);
+    }
+  /* In a function but forcing assignment in global context. CHKLOCAL means to
+     check for an existing local variable first. */
+  else if (mkglobal && variable_context)
+    {
+      v = chklocal ? find_variable (name) : 0;
+      if (v && (local_p (v) == 0 || v->context != variable_context))
+	v = 0;
+      if (v == 0)
+        v = find_global_variable (name);
+      if (v && ((readonly_p (v) && (flags & ASS_FORCE) == 0) || noassign_p (v)))
+	{
+	  if (readonly_p (v))
+	    err_readonly (name);
+	  return (v);	/* XXX */
+	}
+      /* sanity check */
+      newname = (v == 0) ? nameref_transform_name (name, flags) : name;
+      list = expand_compound_array_assignment (v, value, flags);
+      if (v == 0 && mkassoc)
+	v = make_new_assoc_variable (newname);
+      else if (v && mkassoc && assoc_p (v) == 0)
+	v = convert_var_to_assoc (v);
+      else if (v == 0)
+	v = make_new_array_variable (newname);
+      else if (v && mkassoc == 0 && array_p (v) == 0)
+	v = convert_var_to_array (v);
+      if (v)
+	assign_compound_array_list (v, list, flags);
+      if (list)
+	dispose_words (list);
+    }
+  else
+    {
+      v = assign_array_from_string (name, value, flags);
+      if (v && ((readonly_p (v) && (flags & ASS_FORCE) == 0) || noassign_p (v)))
+	{
+	  if (readonly_p (v))
+	    err_readonly (name);
+	  return (v);	/* XXX */
+	}
+    }
+
+  return (v);
+}
+#endif
+
+/* Given STRING, an assignment string, get the value of the right side
+   of the `=', and bind it to the left side.  If EXPAND is true, then
+   perform parameter expansion, command substitution, and arithmetic
+   expansion on the right-hand side.  Perform tilde expansion in any
+   case.  Do not perform word splitting on the result of expansion. */
+static int
+do_assignment_internal (word, expand)
+     const WORD_DESC *word;
+     int expand;
+{
+  int offset, appendop, assign_list, aflags, retval;
+  char *name, *value, *temp;
+  SHELL_VAR *entry;
+#if defined (ARRAY_VARS)
+  char *t;
+  int ni;
+#endif
+  const char *string;
+
+  if (word == 0 || word->word == 0)
+    return 0;
+
+  appendop = assign_list = aflags = 0;
+  string = word->word;
+  offset = assignment (string, 0);
+  name = savestring (string);
+  value = (char *)NULL;
+
+  if (name[offset] == '=')
+    {
+      if (name[offset - 1] == '+')
+	{
+	  appendop = 1;
+	  name[offset - 1] = '\0';
+	}
+
+      name[offset] = 0;		/* might need this set later */
+      temp = name + offset + 1;
+
+#if defined (ARRAY_VARS)
+      if (expand && (word->flags & W_COMPASSIGN))
+	{
+	  assign_list = ni = 1;
+	  value = extract_array_assignment_list (temp, &ni);
+	}
+      else
+#endif
+      if (expand && temp[0])
+	value = expand_string_if_necessary (temp, 0, expand_string_assignment);
+      else
+	value = savestring (temp);
+    }
+
+  if (value == 0)
+    {
+      value = (char *)xmalloc (1);
+      value[0] = '\0';
+    }
+
+  if (echo_command_at_execute)
+    {
+      if (appendop)
+	name[offset - 1] = '+';
+      xtrace_print_assignment (name, value, assign_list, 1);
+      if (appendop)
+	name[offset - 1] = '\0';
+    }
+
+#define ASSIGN_RETURN(r)	do { FREE (value); free (name); return (r); } while (0)
+
+  if (appendop)
+    aflags |= ASS_APPEND;
+
+#if defined (ARRAY_VARS)
+  if (t = mbschr (name, LBRACK))
+    {
+      if (assign_list)
+	{
+	  report_error (_("%s: cannot assign list to array member"), name);
+	  ASSIGN_RETURN (0);
+	}
+      entry = assign_array_element (name, value, aflags);
+      if (entry == 0)
+	ASSIGN_RETURN (0);
+    }
+  else if (assign_list)
+    {
+      if ((word->flags & W_ASSIGNARG) && (word->flags & W_CHKLOCAL))
+	aflags |= ASS_CHKLOCAL;
+      if ((word->flags & W_ASSIGNARG) && (word->flags & W_ASSNGLOBAL) == 0)
+	aflags |= ASS_MKLOCAL;
+      if ((word->flags & W_ASSIGNARG) && (word->flags & W_ASSNGLOBAL))
+	aflags |= ASS_MKGLOBAL;
+      if (word->flags & W_ASSIGNASSOC)
+	aflags |= ASS_MKASSOC;
+      entry = do_compound_assignment (name, value, aflags);
+    }
+  else
+#endif /* ARRAY_VARS */
+  entry = bind_variable (name, value, aflags);
+
+  if (entry)
+    stupidly_hack_special_variables (entry->name);	/* might be a nameref */
+  else
+    stupidly_hack_special_variables (name);
+
+  /* Return 1 if the assignment seems to have been performed correctly. */
+  if (entry == 0 || readonly_p (entry))
+    retval = 0;		/* assignment failure */
+  else if (noassign_p (entry))
+    {
+      set_exit_status (EXECUTION_FAILURE);
+      retval = 1;	/* error status, but not assignment failure */
+    }
+  else
+    retval = 1;
+
+  if (entry && retval != 0 && noassign_p (entry) == 0)
+    VUNSETATTR (entry, att_invisible);
+
+  ASSIGN_RETURN (retval);
+}
+
+/* Perform the assignment statement in STRING, and expand the
+   right side by doing tilde, command and parameter expansion. */
+int
+do_assignment (string)
+     char *string;
+{
+  WORD_DESC td;
+
+  td.flags = W_ASSIGNMENT;
+  td.word = string;
+
+  return do_assignment_internal (&td, 1);
+}
+
+int
+do_word_assignment (word, flags)
+     WORD_DESC *word;
+     int flags;
+{
+  return do_assignment_internal (word, 1);
+}
+
+/* Given STRING, an assignment string, get the value of the right side
+   of the `=', and bind it to the left side.  Do not perform any word
+   expansions on the right hand side. */
+int
+do_assignment_no_expand (string)
+     char *string;
+{
+  WORD_DESC td;
+
+  td.flags = W_ASSIGNMENT;
+  td.word = string;
+
+  return (do_assignment_internal (&td, 0));
+}
+
+/***************************************************
+ *						   *
+ *  Functions to manage the positional parameters  *
+ *						   *
+ ***************************************************/
+
+/* Return the word list that corresponds to `$*'. */
+WORD_LIST *
+list_rest_of_args ()
+{
+  register WORD_LIST *list, *args;
+  int i;
+
+  /* Break out of the loop as soon as one of the dollar variables is null. */
+  for (i = 1, list = (WORD_LIST *)NULL; i < 10 && dollar_vars[i]; i++)
+    list = make_word_list (make_bare_word (dollar_vars[i]), list);
+
+  for (args = rest_of_args; args; args = args->next)
+    list = make_word_list (make_bare_word (args->word->word), list);
+
+  return (REVERSE_LIST (list, WORD_LIST *));
+}
+
+/* Return the value of a positional parameter.  This handles values > 10. */
+char *
+get_dollar_var_value (ind)
+     intmax_t ind;
+{
+  char *temp;
+  WORD_LIST *p;
+
+  if (ind < 10)
+    temp = dollar_vars[ind] ? savestring (dollar_vars[ind]) : (char *)NULL;
+  else	/* We want something like ${11} */
+    {
+      ind -= 10;
+      for (p = rest_of_args; p && ind--; p = p->next)
+	;
+      temp = p ? savestring (p->word->word) : (char *)NULL;
+    }
+  return (temp);
+}
+
+/* Make a single large string out of the dollar digit variables,
+   and the rest_of_args.  If DOLLAR_STAR is 1, then obey the special
+   case of "$*" with respect to IFS. */
+char *
+string_rest_of_args (dollar_star)
+     int dollar_star;
+{
+  register WORD_LIST *list;
+  char *string;
+
+  list = list_rest_of_args ();
+  string = dollar_star ? string_list_dollar_star (list, 0, 0) : string_list (list);
+  dispose_words (list);
+  return (string);
+}
+
+/* Return a string containing the positional parameters from START to
+   END, inclusive.  If STRING[0] == '*', we obey the rules for $*,
+   which only makes a difference if QUOTED is non-zero.  If QUOTED includes
+   Q_HERE_DOCUMENT or Q_DOUBLE_QUOTES, this returns a quoted list, otherwise
+   no quoting chars are added. */
+static char *
+pos_params (string, start, end, quoted, pflags)
+     char *string;
+     int start, end, quoted, pflags;
+{
+  WORD_LIST *save, *params, *h, *t;
+  char *ret;
+  int i;
+
+  /* see if we can short-circuit.  if start == end, we want 0 parameters. */
+  if (start == end)
+    return ((char *)NULL);
+
+  save = params = list_rest_of_args ();
+  if (save == 0 && start > 0)
+    return ((char *)NULL);
+
+  if (start == 0)		/* handle ${@:0[:x]} specially */
+    {
+      t = make_word_list (make_word (dollar_vars[0]), params);
+      save = params = t;
+    }
+
+  for (i = start ? 1 : 0; params && i < start; i++)
+    params = params->next;
+  if (params == 0)
+    {
+      dispose_words (save);
+      return ((char *)NULL);
+    }
+  for (h = t = params; params && i < end; i++)
+    {
+      t = params;
+      params = params->next;
+    }
+  t->next = (WORD_LIST *)NULL;
+
+  ret = string_list_pos_params (string[0], h, quoted, pflags);
+
+  if (t != params)
+    t->next = params;
+
+  dispose_words (save);
+  return (ret);
+}
+
+/******************************************************************/
+/*								  */
+/*	Functions to expand strings to strings or WORD_LISTs      */
+/*								  */
+/******************************************************************/
+
+#if defined (PROCESS_SUBSTITUTION)
+#define EXP_CHAR(s) (s == '$' || s == '`' || s == '<' || s == '>' || s == CTLESC || s == '~')
+#else
+#define EXP_CHAR(s) (s == '$' || s == '`' || s == CTLESC || s == '~')
+#endif
+
+/* If there are any characters in STRING that require full expansion,
+   then call FUNC to expand STRING; otherwise just perform quote
+   removal if necessary.  This returns a new string. */
+static char *
+expand_string_if_necessary (string, quoted, func)
+     char *string;
+     int quoted;
+     EXPFUNC *func;
+{
+  WORD_LIST *list;
+  size_t slen;
+  int i, saw_quote;
+  char *ret;
+  DECLARE_MBSTATE;
+
+  /* Don't need string length for ADVANCE_CHAR unless multibyte chars possible. */
+  slen = (MB_CUR_MAX > 1) ? strlen (string) : 0;
+  i = saw_quote = 0;
+  while (string[i])
+    {
+      if (EXP_CHAR (string[i]))
+	break;
+      else if (string[i] == '\'' || string[i] == '\\' || string[i] == '"')
+	saw_quote = 1;
+      ADVANCE_CHAR (string, slen, i);
+    }
+
+  if (string[i])
+    {
+      list = (*func) (string, quoted);
+      if (list)
+	{
+	  ret = string_list (list);
+	  dispose_words (list);
+	}
+      else
+	ret = (char *)NULL;
+    }
+  else if (saw_quote && ((quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) == 0))
+    ret = string_quote_removal (string, quoted);
+  else
+    ret = savestring (string);
+
+  return ret;
+}
+
+static inline char *
+expand_string_to_string_internal (string, quoted, func)
+     char *string;
+     int quoted;
+     EXPFUNC *func;
+{
+  WORD_LIST *list;
+  char *ret;
+
+  if (string == 0 || *string == '\0')
+    return ((char *)NULL);
+
+  list = (*func) (string, quoted);
+  if (list)
+    {
+      ret = string_list (list);
+      dispose_words (list);
+    }
+  else
+    ret = (char *)NULL;
+
+  return (ret);
+}
+
+char *
+expand_string_to_string (string, quoted)
+     char *string;
+     int quoted;
+{
+  return (expand_string_to_string_internal (string, quoted, expand_string));
+}
+
+char *
+expand_string_unsplit_to_string (string, quoted)
+     char *string;
+     int quoted;
+{
+  return (expand_string_to_string_internal (string, quoted, expand_string_unsplit));
+}
+
+char *
+expand_assignment_string_to_string (string, quoted)
+     char *string;
+     int quoted;
+{
+  return (expand_string_to_string_internal (string, quoted, expand_string_assignment));
+}
+
+char *
+expand_arith_string (string, quoted)
+     char *string;
+     int quoted;
+{
+  WORD_DESC td;
+  WORD_LIST *list, *tlist;
+  size_t slen;
+  int i, saw_quote;
+  char *ret;
+  DECLARE_MBSTATE;
+
+  /* Don't need string length for ADVANCE_CHAR unless multibyte chars possible. */
+  slen = (MB_CUR_MAX > 1) ? strlen (string) : 0;
+  i = saw_quote = 0;
+  while (string[i])
+    {
+      if (EXP_CHAR (string[i]))
+	break;
+      else if (string[i] == '\'' || string[i] == '\\' || string[i] == '"')
+	saw_quote = 1;
+      ADVANCE_CHAR (string, slen, i);
+    }
+
+  if (string[i])
+    {
+      /* This is expanded version of expand_string_internal as it's called by
+	 expand_string_leave_quoted  */
+      td.flags = W_NOPROCSUB|W_NOTILDE;	/* don't want process substitution or tilde expansion */
+#if 0	/* TAG: bash-5.2 */
+      if (quoted & Q_ARRAYSUB)
+	td.flags |= W_NOCOMSUB;
+#endif
+      td.word = savestring (string);
+      list = call_expand_word_internal (&td, quoted, 0, (int *)NULL, (int *)NULL);
+      /* This takes care of the calls from expand_string_leave_quoted and
+	 expand_string */
+      if (list)
+	{
+	  tlist = word_list_split (list);
+	  dispose_words (list);
+	  list = tlist;
+	  if (list)
+	    dequote_list (list);
+	}
+      /* This comes from expand_string_if_necessary */
+      if (list)
+	{
+	  ret = string_list (list);
+	  dispose_words (list);
+	}
+      else
+	ret = (char *)NULL;
+      FREE (td.word);
+    }
+  else if (saw_quote && (quoted & Q_ARITH))
+    ret = string_quote_removal (string, quoted);
+  else if (saw_quote && ((quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) == 0))
+    ret = string_quote_removal (string, quoted);
+  else
+    ret = savestring (string);
+
+  return ret;
+}
+
+#if defined (COND_COMMAND)
+/* Just remove backslashes in STRING.  Returns a new string. */
+char *
+remove_backslashes (string)
+     char *string;
+{
+  char *r, *ret, *s;
+
+  r = ret = (char *)xmalloc (strlen (string) + 1);
+  for (s = string; s && *s; )
+    {
+      if (*s == '\\')
+	s++;
+      if (*s == 0)
+	break;
+      *r++ = *s++;
+    }
+  *r = '\0';
+  return ret;
+}
+
+/* This needs better error handling. */
+/* Expand W for use as an argument to a unary or binary operator in a
+   [[...]] expression.  If SPECIAL is 1, this is the rhs argument
+   to the != or == operator, and should be treated as a pattern.  In
+   this case, we quote the string specially for the globbing code.  If
+   SPECIAL is 2, this is an rhs argument for the =~ operator, and should
+   be quoted appropriately for regcomp/regexec.  The caller is responsible
+   for removing the backslashes if the unquoted word is needed later. In
+   any case, since we don't perform word splitting, we need to do quoted
+   null character removal. */
+char *
+cond_expand_word (w, special)
+     WORD_DESC *w;
+     int special;
+{
+  char *r, *p;
+  WORD_LIST *l;
+  int qflags;
+
+  if (w->word == 0 || w->word[0] == '\0')
+    return ((char *)NULL);
+
+  expand_no_split_dollar_star = 1;
+  w->flags |= W_NOSPLIT2;
+  l = call_expand_word_internal (w, 0, 0, (int *)0, (int *)0);
+  expand_no_split_dollar_star = 0;
+  if (l)
+    {
+      if (special == 0)			/* LHS */
+	{
+	  if (l->word)
+	    word_list_remove_quoted_nulls (l);
+	  dequote_list (l);
+	  r = string_list (l);
+	}
+      else
+	{
+	  /* Need to figure out whether or not we should call dequote_escapes
+	     or a new dequote_ctlnul function here, and under what
+	     circumstances. */
+	  qflags = QGLOB_CVTNULL|QGLOB_CTLESC;
+	  if (special == 2)
+	    qflags |= QGLOB_REGEXP;
+	  word_list_remove_quoted_nulls (l);
+	  p = string_list (l);
+	  r = quote_string_for_globbing (p, qflags);
+	  free (p);
+	}
+      dispose_words (l);
+    }
+  else
+    r = (char *)NULL;
+
+  return r;
+}
+#endif
+
+/* Call expand_word_internal to expand W and handle error returns.
+   A convenience function for functions that don't want to handle
+   any errors or free any memory before aborting. */
+static WORD_LIST *
+call_expand_word_internal (w, q, i, c, e)
+     WORD_DESC *w;
+     int q, i, *c, *e;
+{
+  WORD_LIST *result;
+
+  result = expand_word_internal (w, q, i, c, e);
+  if (result == &expand_word_error || result == &expand_word_fatal)
+    {
+      /* By convention, each time this error is returned, w->word has
+	 already been freed (it sometimes may not be in the fatal case,
+	 but that doesn't result in a memory leak because we're going
+	 to exit in most cases). */
+      w->word = (char *)NULL;
+      last_command_exit_value = EXECUTION_FAILURE;
+      exp_jump_to_top_level ((result == &expand_word_error) ? DISCARD : FORCE_EOF);
+      /* NOTREACHED */
+      return (NULL);
+    }
+  else
+    return (result);
+}
+
+/* Perform parameter expansion, command substitution, and arithmetic
+   expansion on STRING, as if it were a word.  Leave the result quoted.
+   Since this does not perform word splitting, it leaves quoted nulls
+   in the result.  */
+static WORD_LIST *
+expand_string_internal (string, quoted)
+     char *string;
+     int quoted;
+{
+  WORD_DESC td;
+  WORD_LIST *tresult;
+
+  if (string == 0 || *string == 0)
+    return ((WORD_LIST *)NULL);
+
+  td.flags = 0;
+  td.word = savestring (string);
+
+  tresult = call_expand_word_internal (&td, quoted, 0, (int *)NULL, (int *)NULL);
+
+  FREE (td.word);
+  return (tresult);
+}
+
+/* Expand STRING by performing parameter expansion, command substitution,
+   and arithmetic expansion.  Dequote the resulting WORD_LIST before
+   returning it, but do not perform word splitting.  The call to
+   remove_quoted_nulls () is in here because word splitting normally
+   takes care of quote removal. */
+WORD_LIST *
+expand_string_unsplit (string, quoted)
+     char *string;
+     int quoted;
+{
+  WORD_LIST *value;
+
+  if (string == 0 || *string == '\0')
+    return ((WORD_LIST *)NULL);
+
+  expand_no_split_dollar_star = 1;
+  value = expand_string_internal (string, quoted);
+  expand_no_split_dollar_star = 0;
+
+  if (value)
+    {
+      if (value->word)
+	{
+	  remove_quoted_nulls (value->word->word);	/* XXX */
+	  value->word->flags &= ~W_HASQUOTEDNULL;
+	}
+      dequote_list (value);
+    }
+  return (value);
+}
+
+/* Expand the rhs of an assignment statement */
+WORD_LIST *
+expand_string_assignment (string, quoted)
+     char *string;
+     int quoted;
+{
+  WORD_DESC td;
+  WORD_LIST *value;
+
+  if (string == 0 || *string == '\0')
+    return ((WORD_LIST *)NULL);
+
+  expand_no_split_dollar_star = 1;
+
+#if 0
+  /* Other shells (ksh93) do it this way, which affects how $@ is expanded
+     in constructs like bar=${@#0} (preserves the spaces resulting from the
+     expansion of $@ in a context where you don't do word splitting); Posix
+     interp 888 makes the expansion of $@ in contexts where word splitting
+     is not performed unspecified. */
+  td.flags = W_ASSIGNRHS|W_NOSPLIT2;		/* Posix interp 888 */
+#else
+  td.flags = W_ASSIGNRHS;
+#endif
+  td.word = savestring (string);
+  value = call_expand_word_internal (&td, quoted, 0, (int *)NULL, (int *)NULL);
+  FREE (td.word);
+
+  expand_no_split_dollar_star = 0;
+
+  if (value)
+    {
+      if (value->word)
+	{
+	  remove_quoted_nulls (value->word->word);	/* XXX */
+	  value->word->flags &= ~W_HASQUOTEDNULL;
+	}
+      dequote_list (value);
+    }
+  return (value);
+}
+
+
+/* Expand one of the PS? prompt strings. This is a sort of combination of
+   expand_string_unsplit and expand_string_internal, but returns the
+   passed string when an error occurs.  Might want to trap other calls
+   to jump_to_top_level here so we don't endlessly loop. */
+WORD_LIST *
+expand_prompt_string (string, quoted, wflags)
+     char *string;
+     int quoted;
+     int wflags;
+{
+  WORD_LIST *value;
+  WORD_DESC td;
+
+  if (string == 0 || *string == 0)
+    return ((WORD_LIST *)NULL);
+
+  td.flags = wflags;
+  td.word = savestring (string);
+
+  no_longjmp_on_fatal_error = 1;
+  value = expand_word_internal (&td, quoted, 0, (int *)NULL, (int *)NULL);
+  no_longjmp_on_fatal_error = 0;
+
+  if (value == &expand_word_error || value == &expand_word_fatal)
+    {
+      value = make_word_list (make_bare_word (string), (WORD_LIST *)NULL);
+      return value;
+    }
+  FREE (td.word);
+  if (value)
+    {
+      if (value->word)
+	{
+	  remove_quoted_nulls (value->word->word);	/* XXX */
+	  value->word->flags &= ~W_HASQUOTEDNULL;
+	}
+      dequote_list (value);
+    }
+  return (value);
+}
+
+/* Expand STRING just as if you were expanding a word, but do not dequote
+   the resultant WORD_LIST.  This is called only from within this file,
+   and is used to correctly preserve quoted characters when expanding
+   things like ${1+"$@"}.  This does parameter expansion, command
+   substitution, arithmetic expansion, and word splitting. */
+static WORD_LIST *
+expand_string_leave_quoted (string, quoted)
+     char *string;
+     int quoted;
+{
+  WORD_LIST *tlist;
+  WORD_LIST *tresult;
+
+  if (string == 0 || *string == '\0')
+    return ((WORD_LIST *)NULL);
+
+  tlist = expand_string_internal (string, quoted);
+
+  if (tlist)
+    {
+      tresult = word_list_split (tlist);
+      dispose_words (tlist);
+      return (tresult);
+    }
+  return ((WORD_LIST *)NULL);
+}
+
+/* This does not perform word splitting or dequote the WORD_LIST
+   it returns. */
+static WORD_LIST *
+expand_string_for_rhs (string, quoted, op, pflags, dollar_at_p, expanded_p)
+     char *string;
+     int quoted, op, pflags;
+     int *dollar_at_p, *expanded_p;
+{
+  WORD_DESC td;
+  WORD_LIST *tresult;
+  int old_nosplit;
+
+  if (string == 0 || *string == '\0')
+    return (WORD_LIST *)NULL;
+
+  /* We want field splitting to be determined by what is going to be done with
+     the entire ${parameterOPword} expansion, so we don't want to split the RHS
+     we expand here.  However, the expansion of $* is determined by whether we
+     are going to eventually perform word splitting, so we want to set this
+     depending on whether or not are are going to be splitting: if the expansion
+     is quoted, if the OP is `=', or if IFS is set to the empty string, we
+     are not going to be splitting, so we set expand_no_split_dollar_star to
+     note this to callees.
+     We pass through PF_ASSIGNRHS as W_ASSIGNRHS if this is on the RHS of an
+     assignment statement. */
+  /* The updated treatment of $* is the result of Posix interp 888 */
+  /* This was further clarified on the austin-group list in March, 2017 and
+     in Posix bug 1129 */
+  old_nosplit = expand_no_split_dollar_star;
+  expand_no_split_dollar_star = (quoted & (Q_DOUBLE_QUOTES|Q_HERE_DOCUMENT)) || op == '=' || ifs_is_null == 0;	/* XXX - was 1 */
+  td.flags = W_EXPANDRHS;		/* expanding RHS of ${paramOPword} */
+  td.flags |= W_NOSPLIT2;		/* no splitting, remove "" and '' */
+  if (pflags & PF_ASSIGNRHS)		/* pass through */
+    td.flags |= W_ASSIGNRHS;
+  if (op == '=')
+#if 0
+    td.flags |= W_ASSIGNRHS;		/* expand b in ${a=b} like assignment */
+#else
+    td.flags |= W_ASSIGNRHS|W_NOASSNTILDE;		/* expand b in ${a=b} like assignment */
+#endif
+  td.word = string;
+  tresult = call_expand_word_internal (&td, quoted, 1, dollar_at_p, expanded_p);
+  expand_no_split_dollar_star = old_nosplit;
+
+  return (tresult);
+}
+
+/* This does not perform word splitting or dequote the WORD_LIST
+   it returns and it treats $* as if it were quoted. */
+static WORD_LIST *
+expand_string_for_pat (string, quoted, dollar_at_p, expanded_p)
+     char *string;
+     int quoted, *dollar_at_p, *expanded_p;
+{
+  WORD_DESC td;
+  WORD_LIST *tresult;
+  int oexp;
+
+  if (string == 0 || *string == '\0')
+    return (WORD_LIST *)NULL;
+
+  oexp = expand_no_split_dollar_star;
+  expand_no_split_dollar_star = 1;
+  td.flags = W_NOSPLIT2;		/* no splitting, remove "" and '' */
+  td.word = string;
+  tresult = call_expand_word_internal (&td, quoted, 1, dollar_at_p, expanded_p);
+  expand_no_split_dollar_star = oexp;
+
+  return (tresult);
+}
+
+/* Expand STRING just as if you were expanding a word.  This also returns
+   a list of words.  Note that filename globbing is *NOT* done for word
+   or string expansion, just when the shell is expanding a command.  This
+   does parameter expansion, command substitution, arithmetic expansion,
+   and word splitting.  Dequote the resultant WORD_LIST before returning. */
+WORD_LIST *
+expand_string (string, quoted)
+     char *string;
+     int quoted;
+{
+  WORD_LIST *result;
+
+  if (string == 0 || *string == '\0')
+    return ((WORD_LIST *)NULL);
+
+  result = expand_string_leave_quoted (string, quoted);
+  return (result ? dequote_list (result) : result);
+}
+
+/*******************************************
+ *					   *
+ *	Functions to expand WORD_DESCs	   *
+ *					   *
+ *******************************************/
+
+/* Expand WORD, performing word splitting on the result.  This does
+   parameter expansion, command substitution, arithmetic expansion,
+   word splitting, and quote removal. */
+
+WORD_LIST *
+expand_word (word, quoted)
+     WORD_DESC *word;
+     int quoted;
+{
+  WORD_LIST *result, *tresult;
+
+  tresult = call_expand_word_internal (word, quoted, 0, (int *)NULL, (int *)NULL);
+  result = word_list_split (tresult);
+  dispose_words (tresult);
+  return (result ? dequote_list (result) : result);
+}
+
+/* Expand WORD, but do not perform word splitting on the result.  This
+   does parameter expansion, command substitution, arithmetic expansion,
+   and quote removal. */
+WORD_LIST *
+expand_word_unsplit (word, quoted)
+     WORD_DESC *word;
+     int quoted;
+{
+  WORD_LIST *result;
+
+  result = expand_word_leave_quoted (word, quoted);
+  return (result ? dequote_list (result) : result);
+}
+
+/* Perform shell expansions on WORD, but do not perform word splitting or
+   quote removal on the result.  Virtually identical to expand_word_unsplit;
+   could be combined if implementations don't diverge. */
+WORD_LIST *
+expand_word_leave_quoted (word, quoted)
+     WORD_DESC *word;
+     int quoted;
+{
+  WORD_LIST *result;
+
+  expand_no_split_dollar_star = 1;
+  if (ifs_is_null)
+    word->flags |= W_NOSPLIT;
+  word->flags |= W_NOSPLIT2;
+  result = call_expand_word_internal (word, quoted, 0, (int *)NULL, (int *)NULL);
+  expand_no_split_dollar_star = 0;
+
+  return result;
+}
+
+/***************************************************
+ *						   *
+ *	Functions to handle quoting chars	   *
+ *						   *
+ ***************************************************/
+
+/* Conventions:
+
+     A string with s[0] == CTLNUL && s[1] == 0 is a quoted null string.
+     The parser passes CTLNUL as CTLESC CTLNUL. */
+
+/* Quote escape characters in string s, but no other characters.  This is
+   used to protect CTLESC and CTLNUL in variable values from the rest of
+   the word expansion process after the variable is expanded (word splitting
+   and filename generation).  If IFS is null, we quote spaces as well, just
+   in case we split on spaces later (in the case of unquoted $@, we will
+   eventually attempt to split the entire word on spaces).  Corresponding
+   code exists in dequote_escapes.  Even if we don't end up splitting on
+   spaces, quoting spaces is not a problem.  This should never be called on
+   a string that is quoted with single or double quotes or part of a here
+   document (effectively double-quoted).
+   FLAGS says whether or not we are going to split the result. If we are not,
+   and there is a CTLESC or CTLNUL in IFS, we need to quote CTLESC and CTLNUL,
+   respectively, to prevent them from being removed as part of dequoting. */
+static char *
+quote_escapes_internal (string, flags)
+     const char *string;
+     int flags;
+{
+  const char *s, *send;
+  char *t, *result;
+  size_t slen;
+  int quote_spaces, skip_ctlesc, skip_ctlnul, nosplit;
+  DECLARE_MBSTATE; 
+
+  slen = strlen (string);
+  send = string + slen;
+
+  quote_spaces = (ifs_value && *ifs_value == 0);
+  nosplit = (flags & PF_NOSPLIT2);
+
+  for (skip_ctlesc = skip_ctlnul = 0, s = ifs_value; s && *s; s++)
+    {
+      skip_ctlesc |= (nosplit == 0 && *s == CTLESC);
+      skip_ctlnul |= (nosplit == 0 && *s == CTLNUL);
+    }
+
+  t = result = (char *)xmalloc ((slen * 2) + 1);
+  s = string;
+
+  while (*s)
+    {
+      if ((skip_ctlesc == 0 && *s == CTLESC) || (skip_ctlnul == 0 && *s == CTLNUL) || (quote_spaces && *s == ' '))
+	*t++ = CTLESC;
+      COPY_CHAR_P (t, s, send);
+    }
+  *t = '\0';
+
+  return (result);
+}
+
+char *
+quote_escapes (string)
+     const char *string;
+{
+  return (quote_escapes_internal (string, 0));
+}
+
+char *
+quote_rhs (string)
+     const char *string;
+{
+  return (quote_escapes_internal (string, PF_NOSPLIT2));
+}
+
+static WORD_LIST *
+list_quote_escapes (list)
+     WORD_LIST *list;
+{
+  register WORD_LIST *w;
+  char *t;
+
+  for (w = list; w; w = w->next)
+    {
+      t = w->word->word;
+      w->word->word = quote_escapes (t);
+      free (t);
+    }
+  return list;
+}
+
+/* Inverse of quote_escapes; remove CTLESC protecting CTLESC or CTLNUL.
+
+   The parser passes us CTLESC as CTLESC CTLESC and CTLNUL as CTLESC CTLNUL.
+   This is necessary to make unquoted CTLESC and CTLNUL characters in the
+   data stream pass through properly.
+
+   We need to remove doubled CTLESC characters inside quoted strings before
+   quoting the entire string, so we do not double the number of CTLESC
+   characters.
+
+   Also used by parts of the pattern substitution code. */
+char *
+dequote_escapes (string)
+     const char *string;
+{
+  const char *s, *send;
+  char *t, *result;
+  size_t slen;
+  int quote_spaces;
+  DECLARE_MBSTATE;
+
+  if (string == 0)
+    return (char *)0;
+
+  slen = strlen (string);
+  send = string + slen;
+
+  t = result = (char *)xmalloc (slen + 1);
+
+  if (strchr (string, CTLESC) == 0)
+    return (strcpy (result, string));
+
+  quote_spaces = (ifs_value && *ifs_value == 0);
+
+  s = string;
+  while (*s)
+    {
+      if (*s == CTLESC && (s[1] == CTLESC || s[1] == CTLNUL || (quote_spaces && s[1] == ' ')))
+	{
+	  s++;
+	  if (*s == '\0')
+	    break;
+	}
+      COPY_CHAR_P (t, s, send);
+    }
+  *t = '\0';
+
+  return result;
+}
+
+#if defined (INCLUDE_UNUSED)
+static WORD_LIST *
+list_dequote_escapes (list)
+     WORD_LIST *list;
+{
+  register WORD_LIST *w;
+  char *t;
+
+  for (w = list; w; w = w->next)
+    {
+      t = w->word->word;
+      w->word->word = dequote_escapes (t);
+      free (t);
+    }
+  return list;
+}
+#endif
+
+/* Return a new string with the quoted representation of character C.
+   This turns "" into QUOTED_NULL, so the W_HASQUOTEDNULL flag needs to be
+   set in any resultant WORD_DESC where this value is the word. */
+static char *
+make_quoted_char (c)
+     int c;
+{
+  char *temp;
+
+  temp = (char *)xmalloc (3);
+  if (c == 0)
+    {
+      temp[0] = CTLNUL;
+      temp[1] = '\0';
+    }
+  else
+    {
+      temp[0] = CTLESC;
+      temp[1] = c;
+      temp[2] = '\0';
+    }
+  return (temp);
+}
+
+/* Quote STRING, returning a new string.  This turns "" into QUOTED_NULL, so
+   the W_HASQUOTEDNULL flag needs to be set in any resultant WORD_DESC where
+   this value is the word. */
+char *
+quote_string (string)
+     char *string;
+{
+  register char *t;
+  size_t slen;
+  char *result, *send;
+
+  if (*string == 0)
+    {
+      result = (char *)xmalloc (2);
+      result[0] = CTLNUL;
+      result[1] = '\0';
+    }
+  else
+    {
+      DECLARE_MBSTATE;
+
+      slen = strlen (string);
+      send = string + slen;
+
+      result = (char *)xmalloc ((slen * 2) + 1);
+
+      for (t = result; string < send; )
+	{
+	  *t++ = CTLESC;
+	  COPY_CHAR_P (t, string, send);
+	}
+      *t = '\0';
+    }
+  return (result);
+}
+
+/* De-quote quoted characters in STRING. */
+char *
+dequote_string (string)
+     char *string;
+{
+  register char *s, *t;
+  size_t slen;
+  char *result, *send;
+  DECLARE_MBSTATE;
+
+#if defined (DEBUG)
+  if (string[0] == CTLESC && string[1] == 0)
+    internal_inform ("dequote_string: string with bare CTLESC");
+#endif
+
+  slen = STRLEN (string);
+
+  t = result = (char *)xmalloc (slen + 1);
+
+  if (QUOTED_NULL (string))
+    {
+      result[0] = '\0';
+      return (result);
+    }
+
+  /* A string consisting of only a single CTLESC should pass through unchanged */
+  if (string[0] == CTLESC && string[1] == 0)
+    {
+      result[0] = CTLESC;
+      result[1] = '\0';
+      return (result);
+    }
+
+  /* If no character in the string can be quoted, don't bother examining
+     each character.  Just return a copy of the string passed to us. */
+  if (strchr (string, CTLESC) == NULL)
+    return (strcpy (result, string));
+
+  send = string + slen;
+  s = string;
+  while (*s)
+    {
+      if (*s == CTLESC)
+	{
+	  s++;
+	  if (*s == '\0')
+	    break;
+	}
+      COPY_CHAR_P (t, s, send);
+    }
+
+  *t = '\0';
+  return (result);
+}
+
+/* Quote the entire WORD_LIST list. */
+static WORD_LIST *
+quote_list (list)
+     WORD_LIST *list;
+{
+  register WORD_LIST *w;
+  char *t;
+
+  for (w = list; w; w = w->next)
+    {
+      t = w->word->word;
+      w->word->word = quote_string (t);
+      if (*t == 0)
+	w->word->flags |= W_HASQUOTEDNULL;	/* XXX - turn on W_HASQUOTEDNULL here? */
+      w->word->flags |= W_QUOTED;
+      free (t);
+    }
+  return list;
+}
+
+WORD_DESC *
+dequote_word (word)
+     WORD_DESC *word;
+{
+  register char *s;
+
+  s = dequote_string (word->word);
+  if (QUOTED_NULL (word->word))
+    word->flags &= ~W_HASQUOTEDNULL;
+  free (word->word);
+  word->word = s;
+
+  return word;
+}
+
+/* De-quote quoted characters in each word in LIST. */
+WORD_LIST *
+dequote_list (list)
+     WORD_LIST *list;
+{
+  register char *s;
+  register WORD_LIST *tlist;
+
+  for (tlist = list; tlist; tlist = tlist->next)
+    {
+      s = dequote_string (tlist->word->word);
+      if (QUOTED_NULL (tlist->word->word))
+	tlist->word->flags &= ~W_HASQUOTEDNULL;
+      free (tlist->word->word);
+      tlist->word->word = s;
+    }
+  return list;
+}
+
+/* Remove CTLESC protecting a CTLESC or CTLNUL in place.  Return the passed
+   string. */
+char *
+remove_quoted_escapes (string)
+     char *string;
+{
+  char *t;
+
+  if (string)
+    {
+      t = dequote_escapes (string);
+      strcpy (string, t);
+      free (t);
+    }
+
+  return (string);
+}
+
+/* Remove quoted $IFS characters from STRING.  Quoted IFS characters are
+   added to protect them from word splitting, but we need to remove them
+   if no word splitting takes place.  This returns newly-allocated memory,
+   so callers can use it to replace savestring(). */
+char *
+remove_quoted_ifs (string)
+     char *string;
+{
+  register size_t slen;
+  register int i, j;
+  char *ret, *send;
+  DECLARE_MBSTATE;
+
+  slen = strlen (string);
+  send = string + slen;
+
+  i = j = 0;
+  ret = (char *)xmalloc (slen + 1);
+
+  while (i < slen)
+    {
+      if (string[i] == CTLESC)
+	{
+	  i++;
+	  if (string[i] == 0 || isifs (string[i]) == 0)
+	    ret[j++] = CTLESC;
+	  if (i == slen)
+	    break;
+	}
+
+      COPY_CHAR_I (ret, j, string, send, i);
+    }
+  ret[j] = '\0';
+
+  return (ret);
+}
+
+char *
+remove_quoted_nulls (string)
+     char *string;
+{
+  register size_t slen;
+  register int i, j, prev_i;
+  DECLARE_MBSTATE;
+
+  if (strchr (string, CTLNUL) == 0)		/* XXX */
+    return string;				/* XXX */
+
+  slen = strlen (string);
+  i = j = 0;
+
+  while (i < slen)
+    {
+      if (string[i] == CTLESC)
+	{
+	  /* Old code had j++, but we cannot assume that i == j at this
+	     point -- what if a CTLNUL has already been removed from the
+	     string?  We don't want to drop the CTLESC or recopy characters
+	     that we've already copied down. */
+	  i++;
+	  string[j++] = CTLESC;
+	  if (i == slen)
+	    break;
+	}
+      else if (string[i] == CTLNUL)
+	{
+	  i++;
+	  continue;
+	}
+
+      prev_i = i;
+      ADVANCE_CHAR (string, slen, i);		/* COPY_CHAR_I? */
+      if (j < prev_i)
+	{
+	  do string[j++] = string[prev_i++]; while (prev_i < i);
+	}
+      else
+	j = i;
+    }
+  string[j] = '\0';
+
+  return (string);
+}
+
+/* Perform quoted null character removal on each element of LIST.
+   This modifies LIST. */
+void
+word_list_remove_quoted_nulls (list)
+     WORD_LIST *list;
+{
+  register WORD_LIST *t;
+
+  for (t = list; t; t = t->next)
+    {
+      remove_quoted_nulls (t->word->word);
+      t->word->flags &= ~W_HASQUOTEDNULL;
+    }
+}
+
+/* **************************************************************** */
+/*								    */
+/*	   Functions for Matching and Removing Patterns		    */
+/*								    */
+/* **************************************************************** */
+
+#if defined (HANDLE_MULTIBYTE)
+# ifdef INCLUDE_UNUSED
+static unsigned char *
+mb_getcharlens (string, len)
+     char *string;
+     int len;
+{
+  int i, offset, last;
+  unsigned char *ret;
+  char *p;
+  DECLARE_MBSTATE;
+
+  i = offset = 0;
+  last = 0;
+  ret = (unsigned char *)xmalloc (len);
+  memset (ret, 0, len);
+  while (string[last])
+    {
+      ADVANCE_CHAR (string, len, offset);
+      ret[last] = offset - last;
+      last = offset;
+    }
+  return ret;
+}
+#  endif
+#endif
+
+/* Remove the portion of PARAM matched by PATTERN according to OP, where OP
+   can have one of 4 values:
+	RP_LONG_LEFT	remove longest matching portion at start of PARAM
+	RP_SHORT_LEFT	remove shortest matching portion at start of PARAM
+	RP_LONG_RIGHT	remove longest matching portion at end of PARAM
+	RP_SHORT_RIGHT	remove shortest matching portion at end of PARAM
+*/
+
+#define RP_LONG_LEFT	1
+#define RP_SHORT_LEFT	2
+#define RP_LONG_RIGHT	3
+#define RP_SHORT_RIGHT	4
+
+/* Returns its first argument if nothing matched; new memory otherwise */
+static char *
+remove_upattern (param, pattern, op)
+     char *param, *pattern;
+     int op;
+{
+  register size_t len;
+  register char *end;
+  register char *p, *ret, c;
+
+  len = STRLEN (param);
+  end = param + len;
+
+  switch (op)
+    {
+      case RP_LONG_LEFT:	/* remove longest match at start */
+	for (p = end; p >= param; p--)
+	  {
+	    c = *p; *p = '\0';
+	    if (strmatch (pattern, param, FNMATCH_EXTFLAG) != FNM_NOMATCH)
+	      {
+		*p = c;
+		return (savestring (p));
+	      }
+	    *p = c;
+
+	  }
+	break;
+
+      case RP_SHORT_LEFT:	/* remove shortest match at start */
+	for (p = param; p <= end; p++)
+	  {
+	    c = *p; *p = '\0';
+	    if (strmatch (pattern, param, FNMATCH_EXTFLAG) != FNM_NOMATCH)
+	      {
+		*p = c;
+		return (savestring (p));
+	      }
+	    *p = c;
+	  }
+	break;
+
+      case RP_LONG_RIGHT:	/* remove longest match at end */
+	for (p = param; p <= end; p++)
+	  {
+	    if (strmatch (pattern, p, FNMATCH_EXTFLAG) != FNM_NOMATCH)
+	      {
+		c = *p; *p = '\0';
+		ret = savestring (param);
+		*p = c;
+		return (ret);
+	      }
+	  }
+	break;
+
+      case RP_SHORT_RIGHT:	/* remove shortest match at end */
+	for (p = end; p >= param; p--)
+	  {
+	    if (strmatch (pattern, p, FNMATCH_EXTFLAG) != FNM_NOMATCH)
+	      {
+		c = *p; *p = '\0';
+		ret = savestring (param);
+		*p = c;
+		return (ret);
+	      }
+	  }
+	break;
+    }
+
+  return (param);	/* no match, return original string */
+}
+
+#if defined (HANDLE_MULTIBYTE)
+/* Returns its first argument if nothing matched; new memory otherwise */
+static wchar_t *
+remove_wpattern (wparam, wstrlen, wpattern, op)
+     wchar_t *wparam;
+     size_t wstrlen;
+     wchar_t *wpattern;
+     int op;
+{
+  wchar_t wc, *ret;
+  int n;
+
+  switch (op)
+    {
+      case RP_LONG_LEFT:	/* remove longest match at start */
+        for (n = wstrlen; n >= 0; n--)
+	  {
+	    wc = wparam[n]; wparam[n] = L'\0';
+	    if (wcsmatch (wpattern, wparam, FNMATCH_EXTFLAG) != FNM_NOMATCH)
+	      {
+		wparam[n] = wc;
+		return (wcsdup (wparam + n));
+	      }
+	    wparam[n] = wc;
+	  }
+	break;
+
+      case RP_SHORT_LEFT:	/* remove shortest match at start */
+	for (n = 0; n <= wstrlen; n++)
+	  {
+	    wc = wparam[n]; wparam[n] = L'\0';
+	    if (wcsmatch (wpattern, wparam, FNMATCH_EXTFLAG) != FNM_NOMATCH)
+	      {
+		wparam[n] = wc;
+		return (wcsdup (wparam + n));
+	      }
+	    wparam[n] = wc;
+	  }
+	break;
+
+      case RP_LONG_RIGHT:	/* remove longest match at end */
+        for (n = 0; n <= wstrlen; n++)
+	  {
+	    if (wcsmatch (wpattern, wparam + n, FNMATCH_EXTFLAG) != FNM_NOMATCH)
+	      {
+		wc = wparam[n]; wparam[n] = L'\0';
+		ret = wcsdup (wparam);
+		wparam[n] = wc;
+		return (ret);
+	      }
+	  }
+	break;
+
+      case RP_SHORT_RIGHT:	/* remove shortest match at end */
+	for (n = wstrlen; n >= 0; n--)
+	  {
+	    if (wcsmatch (wpattern, wparam + n, FNMATCH_EXTFLAG) != FNM_NOMATCH)
+	      {
+		wc = wparam[n]; wparam[n] = L'\0';
+		ret = wcsdup (wparam);
+		wparam[n] = wc;
+		return (ret);
+	      }
+	  }
+	break;
+    }
+
+  return (wparam);	/* no match, return original string */
+}
+#endif /* HANDLE_MULTIBYTE */
+
+static char *
+remove_pattern (param, pattern, op)
+     char *param, *pattern;
+     int op;
+{
+  char *xret;
+
+  if (param == NULL)
+    return (param);
+  if (*param == '\0' || pattern == NULL || *pattern == '\0')	/* minor optimization */
+    return (savestring (param));
+
+#if defined (HANDLE_MULTIBYTE)
+  if (MB_CUR_MAX > 1)
+    {
+      wchar_t *ret, *oret;
+      size_t n;
+      wchar_t *wparam, *wpattern;
+      mbstate_t ps;
+
+      /* XXX - could optimize here by checking param and pattern for multibyte
+	 chars with mbsmbchar and calling remove_upattern. */
+
+      n = xdupmbstowcs (&wpattern, NULL, pattern);
+      if (n == (size_t)-1)
+	{
+	  xret = remove_upattern (param, pattern, op);
+	  return ((xret == param) ? savestring (param) : xret);
+	}
+      n = xdupmbstowcs (&wparam, NULL, param);
+
+      if (n == (size_t)-1)
+	{
+	  free (wpattern);
+	  xret = remove_upattern (param, pattern, op);
+	  return ((xret == param) ? savestring (param) : xret);
+	}
+      oret = ret = remove_wpattern (wparam, n, wpattern, op);
+      /* Don't bother to convert wparam back to multibyte string if nothing
+	 matched; just return copy of original string */
+      if (ret == wparam)
+        {
+          free (wparam);
+          free (wpattern);
+          return (savestring (param));
+        }
+
+      free (wparam);
+      free (wpattern);
+
+      n = strlen (param);
+      xret = (char *)xmalloc (n + 1);
+      memset (&ps, '\0', sizeof (mbstate_t));
+      n = wcsrtombs (xret, (const wchar_t **)&ret, n, &ps);
+      xret[n] = '\0';		/* just to make sure */
+      free (oret);
+      return xret;      
+    }
+  else
+#endif
+    {
+      xret = remove_upattern (param, pattern, op);
+      return ((xret == param) ? savestring (param) : xret);
+    }
+}
+
+/* Match PAT anywhere in STRING and return the match boundaries.
+   This returns 1 in case of a successful match, 0 otherwise.  SP
+   and EP are pointers into the string where the match begins and
+   ends, respectively.  MTYPE controls what kind of match is attempted.
+   MATCH_BEG and MATCH_END anchor the match at the beginning and end
+   of the string, respectively.  The longest match is returned. */
+static int
+match_upattern (string, pat, mtype, sp, ep)
+     char *string, *pat;
+     int mtype;
+     char **sp, **ep;
+{
+  int c, mlen;
+  size_t len;
+  register char *p, *p1, *npat;
+  char *end;
+
+  /* If the pattern doesn't match anywhere in the string, go ahead and
+     short-circuit right away.  A minor optimization, saves a bunch of
+     unnecessary calls to strmatch (up to N calls for a string of N
+     characters) if the match is unsuccessful.  To preserve the semantics
+     of the substring matches below, we make sure that the pattern has
+     `*' as first and last character, making a new pattern if necessary. */
+  /* XXX - check this later if I ever implement `**' with special meaning,
+     since this will potentially result in `**' at the beginning or end */
+  len = STRLEN (pat);
+  if (pat[0] != '*' || (pat[0] == '*' && pat[1] == LPAREN && extended_glob) || pat[len - 1] != '*')
+    {
+      int unescaped_backslash;
+      char *pp;
+
+      p = npat = (char *)xmalloc (len + 3);
+      p1 = pat;
+      if ((mtype != MATCH_BEG) && (*p1 != '*' || (*p1 == '*' && p1[1] == LPAREN && extended_glob)))
+	*p++ = '*';
+      while (*p1)
+	*p++ = *p1++;
+#if 1
+      /* Need to also handle a pattern that ends with an unescaped backslash.
+	 For right now, we ignore it because the pattern matching code will
+	 fail the match anyway */
+      /* If the pattern ends with a `*' we leave it alone if it's preceded by
+	 an even number of backslashes, but if it's escaped by a backslash
+	 we need to add another `*'. */
+      if ((mtype != MATCH_END) && (p1[-1] == '*' && (unescaped_backslash = p1[-2] == '\\')))
+	{
+	  pp = p1 - 3;
+	  while (pp >= pat && *pp-- == '\\')
+	    unescaped_backslash = 1 - unescaped_backslash;
+	  if (unescaped_backslash)
+	    *p++ = '*';
+	}
+      else if (mtype != MATCH_END && p1[-1] != '*')
+	*p++ = '*';
+#else 
+      if (p1[-1] != '*' || p1[-2] == '\\')
+	*p++ = '*';
+#endif
+      *p = '\0';
+    }
+  else
+    npat = pat;
+  c = strmatch (npat, string, FNMATCH_EXTFLAG | FNMATCH_IGNCASE);
+  if (npat != pat)
+    free (npat);
+  if (c == FNM_NOMATCH)
+    return (0);
+
+  len = STRLEN (string);
+  end = string + len;
+
+  mlen = umatchlen (pat, len);
+  if (mlen > (int)len)
+    return (0);
+
+  switch (mtype)
+    {
+    case MATCH_ANY:
+      for (p = string; p <= end; p++)
+	{
+	  if (match_pattern_char (pat, p, FNMATCH_IGNCASE))
+	    {
+	      p1 = (mlen == -1) ? end : p + mlen;
+	      /* p1 - p = length of portion of string to be considered
+	         p = current position in string
+	         mlen = number of characters consumed by match (-1 for entire string)
+	         end = end of string
+	         we want to break immediately if the potential match len
+	         is greater than the number of characters remaining in the
+	         string
+	      */
+	      if (p1 > end)
+		break;
+	      for ( ; p1 >= p; p1--)
+		{
+		  c = *p1; *p1 = '\0';
+		  if (strmatch (pat, p, FNMATCH_EXTFLAG | FNMATCH_IGNCASE) == 0)
+		    {
+		      *p1 = c;
+		      *sp = p;
+		      *ep = p1;
+		      return 1;
+		    }
+		  *p1 = c;
+#if 1
+		  /* If MLEN != -1, we have a fixed length pattern. */
+		  if (mlen != -1)
+		    break;
+#endif
+		}
+	    }
+	}
+
+      return (0);
+
+    case MATCH_BEG:
+      if (match_pattern_char (pat, string, FNMATCH_IGNCASE) == 0)
+	return (0);
+
+      for (p = (mlen == -1) ? end : string + mlen; p >= string; p--)
+	{
+	  c = *p; *p = '\0';
+	  if (strmatch (pat, string, FNMATCH_EXTFLAG | FNMATCH_IGNCASE) == 0)
+	    {
+	      *p = c;
+	      *sp = string;
+	      *ep = p;
+	      return 1;
+	    }
+	  *p = c;
+	  /* If MLEN != -1, we have a fixed length pattern. */
+	  if (mlen != -1)
+	    break;
+	}
+
+      return (0);
+
+    case MATCH_END:
+      for (p = end - ((mlen == -1) ? len : mlen); p <= end; p++)
+	{
+	  if (strmatch (pat, p, FNMATCH_EXTFLAG | FNMATCH_IGNCASE) == 0)
+	    {
+	      *sp = p;
+	      *ep = end;
+	      return 1;
+	    }
+	  /* If MLEN != -1, we have a fixed length pattern. */
+	  if (mlen != -1)
+	    break;
+	}
+
+      return (0);
+    }
+
+  return (0);
+}
+
+#if defined (HANDLE_MULTIBYTE)
+
+#define WFOLD(c) (match_ignore_case && iswupper (c) ? towlower (c) : (c))
+
+/* Match WPAT anywhere in WSTRING and return the match boundaries.
+   This returns 1 in case of a successful match, 0 otherwise.  Wide
+   character version. */
+static int
+match_wpattern (wstring, indices, wstrlen, wpat, mtype, sp, ep)
+     wchar_t *wstring;
+     char **indices;
+     size_t wstrlen;
+     wchar_t *wpat;
+     int mtype;
+     char **sp, **ep;
+{
+  wchar_t wc, *wp, *nwpat, *wp1;
+  size_t len;
+  int mlen;
+  int n, n1, n2, simple;
+
+  simple = (wpat[0] != L'\\' && wpat[0] != L'*' && wpat[0] != L'?' && wpat[0] != L'[');
+#if defined (EXTENDED_GLOB)
+  if (extended_glob)
+    simple &= (wpat[1] != L'(' || (wpat[0] != L'*' && wpat[0] != L'?' && wpat[0] != L'+' && wpat[0] != L'!' && wpat[0] != L'@')); /*)*/
+#endif
+
+  /* If the pattern doesn't match anywhere in the string, go ahead and
+     short-circuit right away.  A minor optimization, saves a bunch of
+     unnecessary calls to strmatch (up to N calls for a string of N
+     characters) if the match is unsuccessful.  To preserve the semantics
+     of the substring matches below, we make sure that the pattern has
+     `*' as first and last character, making a new pattern if necessary. */
+  len = wcslen (wpat);
+  if (wpat[0] != L'*' || (wpat[0] == L'*' && wpat[1] == WLPAREN && extended_glob) || wpat[len - 1] != L'*')
+    {
+      int unescaped_backslash;
+      wchar_t *wpp;
+
+      wp = nwpat = (wchar_t *)xmalloc ((len + 3) * sizeof (wchar_t));
+      wp1 = wpat;
+      if (*wp1 != L'*' || (*wp1 == '*' && wp1[1] == WLPAREN && extended_glob))
+	*wp++ = L'*';
+      while (*wp1 != L'\0')
+	*wp++ = *wp1++;
+#if 1
+      /* See comments above in match_upattern. */
+      if (wp1[-1] == L'*' && (unescaped_backslash = wp1[-2] == L'\\'))
+        {
+          wpp = wp1 - 3;
+          while (wpp >= wpat && *wpp-- == L'\\')
+            unescaped_backslash = 1 - unescaped_backslash;
+          if (unescaped_backslash)
+            *wp++ = L'*';
+        }
+      else if (wp1[-1] != L'*')
+        *wp++ = L'*';
+#else      
+      if (wp1[-1] != L'*' || wp1[-2] == L'\\')
+        *wp++ = L'*';
+#endif
+      *wp = '\0';
+    }
+  else
+    nwpat = wpat;
+  len = wcsmatch (nwpat, wstring, FNMATCH_EXTFLAG | FNMATCH_IGNCASE);
+  if (nwpat != wpat)
+    free (nwpat);
+  if (len == FNM_NOMATCH)
+    return (0);
+
+  mlen = wmatchlen (wpat, wstrlen);
+  if (mlen > (int)wstrlen)
+    return (0);
+
+/* itrace("wmatchlen (%ls) -> %d", wpat, mlen); */
+  switch (mtype)
+    {
+    case MATCH_ANY:
+      for (n = 0; n <= wstrlen; n++)
+	{
+	  n2 = simple ? (WFOLD(*wpat) == WFOLD(wstring[n])) : match_pattern_wchar (wpat, wstring + n, FNMATCH_IGNCASE);
+	  if (n2)
+	    {
+	      n1 = (mlen == -1) ? wstrlen : n + mlen;
+	      if (n1 > wstrlen)
+	        break;
+
+	      for ( ; n1 >= n; n1--)
+		{
+		  wc = wstring[n1]; wstring[n1] = L'\0';
+		  if (wcsmatch (wpat, wstring + n, FNMATCH_EXTFLAG | FNMATCH_IGNCASE) == 0)
+		    {
+		      wstring[n1] = wc;
+		      *sp = indices[n];
+		      *ep = indices[n1];
+		      return 1;
+		    }
+		  wstring[n1] = wc;
+		  /* If MLEN != -1, we have a fixed length pattern. */
+		  if (mlen != -1)
+		    break;
+		}
+	    }
+	}
+
+      return (0);
+
+    case MATCH_BEG:
+      if (match_pattern_wchar (wpat, wstring, FNMATCH_IGNCASE) == 0)
+	return (0);
+
+      for (n = (mlen == -1) ? wstrlen : mlen; n >= 0; n--)
+	{
+	  wc = wstring[n]; wstring[n] = L'\0';
+	  if (wcsmatch (wpat, wstring, FNMATCH_EXTFLAG | FNMATCH_IGNCASE) == 0)
+	    {
+	      wstring[n] = wc;
+	      *sp = indices[0];
+	      *ep = indices[n];
+	      return 1;
+	    }
+	  wstring[n] = wc;
+	  /* If MLEN != -1, we have a fixed length pattern. */
+	  if (mlen != -1)
+	    break;
+	}
+
+      return (0);
+
+    case MATCH_END:
+      for (n = wstrlen - ((mlen == -1) ? wstrlen : mlen); n <= wstrlen; n++)
+	{
+	  if (wcsmatch (wpat, wstring + n, FNMATCH_EXTFLAG | FNMATCH_IGNCASE) == 0)
+	    {
+	      *sp = indices[n];
+	      *ep = indices[wstrlen];
+	      return 1;
+	    }
+	  /* If MLEN != -1, we have a fixed length pattern. */
+	  if (mlen != -1)
+	    break;
+	}
+
+      return (0);
+    }
+
+  return (0);
+}
+#undef WFOLD
+#endif /* HANDLE_MULTIBYTE */
+
+static int
+match_pattern (string, pat, mtype, sp, ep)
+     char *string, *pat;
+     int mtype;
+     char **sp, **ep;
+{
+#if defined (HANDLE_MULTIBYTE)
+  int ret;
+  size_t n;
+  wchar_t *wstring, *wpat;
+  char **indices;
+#endif
+
+  if (string == 0 || pat == 0 || *pat == 0)
+    return (0);
+
+#if defined (HANDLE_MULTIBYTE)
+  if (MB_CUR_MAX > 1)
+    {
+      if (mbsmbchar (string) == 0 && mbsmbchar (pat) == 0)
+        return (match_upattern (string, pat, mtype, sp, ep));
+
+      n = xdupmbstowcs (&wpat, NULL, pat);
+      if (n == (size_t)-1)
+	return (match_upattern (string, pat, mtype, sp, ep));
+      n = xdupmbstowcs (&wstring, &indices, string);
+      if (n == (size_t)-1)
+	{
+	  free (wpat);
+	  return (match_upattern (string, pat, mtype, sp, ep));
+	}
+      ret = match_wpattern (wstring, indices, n, wpat, mtype, sp, ep);
+
+      free (wpat);
+      free (wstring);
+      free (indices);
+
+      return (ret);
+    }
+  else
+#endif
+    return (match_upattern (string, pat, mtype, sp, ep));
+}
+
+static int
+getpatspec (c, value)
+     int c;
+     char *value;
+{
+  if (c == '#')
+    return ((*value == '#') ? RP_LONG_LEFT : RP_SHORT_LEFT);
+  else	/* c == '%' */
+    return ((*value == '%') ? RP_LONG_RIGHT : RP_SHORT_RIGHT);
+}
+
+/* Posix.2 says that the WORD should be run through tilde expansion,
+   parameter expansion, command substitution and arithmetic expansion.
+   This leaves the result quoted, so quote_string_for_globbing () has
+   to be called to fix it up for strmatch ().  If QUOTED is non-zero,
+   it means that the entire expression was enclosed in double quotes.
+   This means that quoting characters in the pattern do not make any
+   special pattern characters quoted.  For example, the `*' in the
+   following retains its special meaning: "${foo#'*'}". */
+static char *
+getpattern (value, quoted, expandpat)
+     char *value;
+     int quoted, expandpat;
+{
+  char *pat, *tword;
+  WORD_LIST *l;
+#if 0
+  int i;
+#endif
+  /* There is a problem here:  how to handle single or double quotes in the
+     pattern string when the whole expression is between double quotes?
+     POSIX.2 says that enclosing double quotes do not cause the pattern to
+     be quoted, but does that leave us a problem with @ and array[@] and their
+     expansions inside a pattern? */
+#if 0
+  if (expandpat && (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) && *tword)
+    {
+      i = 0;
+      pat = string_extract_double_quoted (tword, &i, SX_STRIPDQ);
+      free (tword);
+      tword = pat;
+    }
+#endif
+
+  /* expand_string_for_pat () leaves WORD quoted and does not perform
+     word splitting. */
+  l = *value ? expand_string_for_pat (value,
+				      (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) ? Q_PATQUOTE : quoted,
+				      (int *)NULL, (int *)NULL)
+	     : (WORD_LIST *)0;
+  if (l)
+    word_list_remove_quoted_nulls (l);
+  pat = string_list (l);
+  dispose_words (l);
+  if (pat)
+    {
+      tword = quote_string_for_globbing (pat, QGLOB_CVTNULL);
+      free (pat);
+      pat = tword;
+    }
+  return (pat);
+}
+
+#if 0
+/* Handle removing a pattern from a string as a result of ${name%[%]value}
+   or ${name#[#]value}. */
+static char *
+variable_remove_pattern (value, pattern, patspec, quoted)
+     char *value, *pattern;
+     int patspec, quoted;
+{
+  char *tword;
+
+  tword = remove_pattern (value, pattern, patspec);
+
+  return (tword);
+}
+#endif
+
+static char *
+list_remove_pattern (list, pattern, patspec, itype, quoted)
+     WORD_LIST *list;
+     char *pattern;
+     int patspec, itype, quoted;
+{
+  WORD_LIST *new, *l;
+  WORD_DESC *w;
+  char *tword;
+
+  for (new = (WORD_LIST *)NULL, l = list; l; l = l->next)
+    {
+      tword = remove_pattern (l->word->word, pattern, patspec);
+      w = alloc_word_desc ();
+      w->word = tword ? tword : savestring ("");
+      new = make_word_list (w, new);
+    }
+
+  l = REVERSE_LIST (new, WORD_LIST *);
+  tword = string_list_pos_params (itype, l, quoted, 0);
+  dispose_words (l);
+
+  return (tword);
+}
+
+static char *
+parameter_list_remove_pattern (itype, pattern, patspec, quoted)
+     int itype;
+     char *pattern;
+     int patspec, quoted;
+{
+  char *ret;
+  WORD_LIST *list;
+
+  list = list_rest_of_args ();
+  if (list == 0)
+    return ((char *)NULL);
+  ret = list_remove_pattern (list, pattern, patspec, itype, quoted);
+  dispose_words (list);
+  return (ret);
+}
+
+#if defined (ARRAY_VARS)
+static char *
+array_remove_pattern (var, pattern, patspec, starsub, quoted)
+     SHELL_VAR *var;
+     char *pattern;
+     int patspec;
+     int starsub;	/* so we can figure out how it's indexed */
+     int quoted;
+{
+  ARRAY *a;
+  HASH_TABLE *h;
+  int itype;
+  char *ret;
+  WORD_LIST *list;
+  SHELL_VAR *v;
+
+  v = var;		/* XXX - for now */
+
+  itype = starsub ? '*' : '@';
+
+  a = (v && array_p (v)) ? array_cell (v) : 0;
+  h = (v && assoc_p (v)) ? assoc_cell (v) : 0;
+  
+  list = a ? array_to_word_list (a) : (h ? assoc_to_word_list (h) : 0);
+  if (list == 0)
+   return ((char *)NULL);
+  ret = list_remove_pattern (list, pattern, patspec, itype, quoted);
+  dispose_words (list);
+
+  return ret;
+}
+#endif /* ARRAY_VARS */
+
+static char *
+parameter_brace_remove_pattern (varname, value, ind, patstr, rtype, quoted, flags)
+     char *varname, *value;
+     int ind;
+     char *patstr;
+     int rtype, quoted, flags;
+{
+  int vtype, patspec, starsub;
+  char *temp1, *val, *pattern, *oname;
+  SHELL_VAR *v;
+
+  if (value == 0)
+    return ((char *)NULL);
+
+  oname = this_command_name;
+  this_command_name = varname;
+
+  vtype = get_var_and_type (varname, value, ind, quoted, flags, &v, &val);
+  if (vtype == -1)
+    {
+      this_command_name = oname;
+      return ((char *)NULL);
+    }
+
+  starsub = vtype & VT_STARSUB;
+  vtype &= ~VT_STARSUB;
+
+  patspec = getpatspec (rtype, patstr);
+  if (patspec == RP_LONG_LEFT || patspec == RP_LONG_RIGHT)
+    patstr++;
+
+  /* Need to pass getpattern newly-allocated memory in case of expansion --
+     the expansion code will free the passed string on an error. */
+  temp1 = savestring (patstr);
+  pattern = getpattern (temp1, quoted, 1);
+  free (temp1);
+
+  temp1 = (char *)NULL;		/* shut up gcc */
+  switch (vtype)
+    {
+    case VT_VARIABLE:
+    case VT_ARRAYMEMBER:
+      temp1 = remove_pattern (val, pattern, patspec);
+      if (vtype == VT_VARIABLE)
+	FREE (val);
+      if (temp1)
+	{
+	  val = (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES))
+			? quote_string (temp1)
+			: quote_escapes (temp1);
+	  free (temp1);
+	  temp1 = val;
+	}
+      break;
+#if defined (ARRAY_VARS)
+    case VT_ARRAYVAR:
+      temp1 = array_remove_pattern (v, pattern, patspec, starsub, quoted);
+      if (temp1 && ((quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) == 0))
+	{
+	  val = quote_escapes (temp1);
+	  free (temp1);
+	  temp1 = val;
+	}
+      break;
+#endif
+    case VT_POSPARMS:
+      temp1 = parameter_list_remove_pattern (varname[0], pattern, patspec, quoted);
+      if (temp1 && quoted == 0 && ifs_is_null)
+	{
+	  /* Posix interp 888 */
+	}
+      else if (temp1 && ((quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) == 0))
+	{
+	  val = quote_escapes (temp1);
+	  free (temp1);
+	  temp1 = val;
+	}
+      break;
+    }
+
+  this_command_name = oname;
+
+  FREE (pattern);
+  return temp1;
+}    
+
+#if defined (PROCESS_SUBSTITUTION)
+
+static void reap_some_procsubs PARAMS((int));
+
+/*****************************************************************/
+/*								 */
+/*		    Hacking Process Substitution		 */
+/*								 */
+/*****************************************************************/
+
+#if !defined (HAVE_DEV_FD)
+/* Named pipes must be removed explicitly with `unlink'.  This keeps a list
+   of FIFOs the shell has open.  unlink_fifo_list will walk the list and
+   unlink the ones that don't have a living process on the other end.
+   unlink_all_fifos will walk the list and unconditionally unlink them, trying
+   to open and close the FIFO first to release any child processes sleeping on
+   the FIFO. add_fifo_list adds the name of an open FIFO to the list. 
+   NFIFO is a count of the number of FIFOs in the list. */
+#define FIFO_INCR 20
+
+/* PROC value of -1 means the process has been reaped and the FIFO needs to
+   be removed. PROC value of 0 means the slot is unused. */
+struct temp_fifo {
+  char *file;
+  pid_t proc;
+};
+
+static struct temp_fifo *fifo_list = (struct temp_fifo *)NULL;
+static int nfifo;
+static int fifo_list_size;
+
+void
+clear_fifo_list ()
+{
+  int i;
+
+  for (i = 0; i < fifo_list_size; i++)
+    {
+      if (fifo_list[i].file)
+	free (fifo_list[i].file);
+      fifo_list[i].file = NULL;
+      fifo_list[i].proc = 0;
+    }
+  nfifo = 0;
+}
+
+void *
+copy_fifo_list (sizep)
+     int *sizep;
+{
+  if (sizep)
+    *sizep = 0;
+  return (void *)NULL;
+}
+
+static void
+add_fifo_list (pathname)
+     char *pathname;
+{
+  int osize, i;
+
+  if (nfifo >= fifo_list_size - 1)
+    {
+      osize = fifo_list_size;
+      fifo_list_size += FIFO_INCR;
+      fifo_list = (struct temp_fifo *)xrealloc (fifo_list,
+				fifo_list_size * sizeof (struct temp_fifo));
+      for (i = osize; i < fifo_list_size; i++)
+	{
+	  fifo_list[i].file = (char *)NULL;
+	  fifo_list[i].proc = 0;	/* unused */
+	}
+    }
+
+  fifo_list[nfifo].file = savestring (pathname);
+  nfifo++;
+}
+
+void
+unlink_fifo (i)
+     int i;
+{
+  if ((fifo_list[i].proc == (pid_t)-1) || (fifo_list[i].proc > 0 && (kill(fifo_list[i].proc, 0) == -1)))
+    {
+      unlink (fifo_list[i].file);
+      free (fifo_list[i].file);
+      fifo_list[i].file = (char *)NULL;
+      fifo_list[i].proc = 0;
+    }
+}
+
+void
+unlink_fifo_list ()
+{
+  int saved, i, j;
+
+  if (nfifo == 0)
+    return;
+
+  for (i = saved = 0; i < nfifo; i++)
+    {
+      if ((fifo_list[i].proc == (pid_t)-1) || (fifo_list[i].proc > 0 && (kill(fifo_list[i].proc, 0) == -1)))
+	{
+	  unlink (fifo_list[i].file);
+	  free (fifo_list[i].file);
+	  fifo_list[i].file = (char *)NULL;
+	  fifo_list[i].proc = 0;
+	}
+      else
+	saved++;
+    }
+
+  /* If we didn't remove some of the FIFOs, compact the list. */
+  if (saved)
+    {
+      for (i = j = 0; i < nfifo; i++)
+	if (fifo_list[i].file)
+	  {
+	    if (i != j)
+	      {
+		fifo_list[j].file = fifo_list[i].file;
+		fifo_list[j].proc = fifo_list[i].proc;
+		fifo_list[i].file = (char *)NULL;
+		fifo_list[i].proc = 0;
+	      }
+	    j++;
+	  }
+      nfifo = j;
+    }
+  else
+    nfifo = 0;
+}
+
+void
+unlink_all_fifos ()
+{
+  int i, fd;
+
+  if (nfifo == 0)
+    return;
+
+  for (i = 0; i < nfifo; i++)
+    {
+      fifo_list[i].proc = (pid_t)-1;
+      fd = open (fifo_list[i].file, O_RDWR|O_NONBLOCK);
+      unlink_fifo (i);
+      if (fd >= 0)
+	close (fd);
+    }
+
+  nfifo = 0;
+}
+
+/* Take LIST, which is a bitmap denoting active FIFOs in fifo_list
+   from some point in the past, and close all open FIFOs in fifo_list
+   that are not marked as active in LIST.  If LIST is NULL, close
+   everything in fifo_list. LSIZE is the number of elements in LIST, in
+   case it's larger than fifo_list_size (size of fifo_list). */
+void
+close_new_fifos (list, lsize)
+     void *list;
+     int lsize;
+{
+  int i;
+  char *plist;
+
+  if (list == 0)
+    {
+      unlink_fifo_list ();
+      return;
+    }
+
+  for (plist = (char *)list, i = 0; i < lsize; i++)
+    if (plist[i] == 0 && i < fifo_list_size && fifo_list[i].proc != -1)
+      unlink_fifo (i);
+
+  for (i = lsize; i < fifo_list_size; i++)
+    unlink_fifo (i);  
+}
+
+int
+find_procsub_child (pid)
+     pid_t pid;
+{
+  int i;
+
+  for (i = 0; i < nfifo; i++)
+    if (fifo_list[i].proc == pid)
+      return i;
+  return -1;
+}
+
+void
+set_procsub_status (ind, pid, status)
+     int ind;
+     pid_t pid;
+     int status;
+{
+  if (ind >= 0 && ind < nfifo)
+    fifo_list[ind].proc = (pid_t)-1;		/* sentinel */
+}
+
+/* If we've marked the process for this procsub as dead, close the
+   associated file descriptor and delete the FIFO. */
+static void
+reap_some_procsubs (max)
+     int max;
+{
+  int i;
+
+  for (i = 0; i < max; i++)
+    if (fifo_list[i].proc == (pid_t)-1)	/* reaped */
+      unlink_fifo (i);
+}
+
+void
+reap_procsubs ()
+{
+  reap_some_procsubs (nfifo);
+}
+
+#if 0
+/* UNUSED */
+void
+wait_procsubs ()
+{
+  int i, r;
+
+  for (i = 0; i < nfifo; i++)
+    {
+      if (fifo_list[i].proc != (pid_t)-1 && fifo_list[i].proc > 0)
+	{
+	  r = wait_for (fifo_list[i].proc, 0);
+	  save_proc_status (fifo_list[i].proc, r);
+	  fifo_list[i].proc = (pid_t)-1;
+	}
+    }
+}
+#endif
+
+int
+fifos_pending ()
+{
+  return nfifo;
+}
+
+int
+num_fifos ()
+{
+  return nfifo;
+}
+
+static char *
+make_named_pipe ()
+{
+  char *tname;
+
+  tname = sh_mktmpname ("sh-np", MT_USERANDOM|MT_USETMPDIR);
+  if (mkfifo (tname, 0600) < 0)
+    {
+      free (tname);
+      return ((char *)NULL);
+    }
+
+  add_fifo_list (tname);
+  return (tname);
+}
+
+#else /* HAVE_DEV_FD */
+
+/* DEV_FD_LIST is a bitmap of file descriptors attached to pipes the shell
+   has open to children.  NFDS is a count of the number of bits currently
+   set in DEV_FD_LIST.  TOTFDS is a count of the highest possible number
+   of open files. */
+/* dev_fd_list[I] value of -1 means the process has been reaped and file
+   descriptor I needs to be closed. Value of 0 means the slot is unused. */
+
+static pid_t *dev_fd_list = (pid_t *)NULL;
+static int nfds;
+static int totfds;	/* The highest possible number of open files. */
+
+void
+clear_fifo (i)
+     int i;
+{
+  if (dev_fd_list[i])
+    {
+      dev_fd_list[i] = 0;
+      nfds--;
+    }
+}
+
+void
+clear_fifo_list ()
+{
+  register int i;
+
+  if (nfds == 0)
+    return;
+
+  for (i = 0; nfds && i < totfds; i++)
+    clear_fifo (i);
+
+  nfds = 0;
+}
+
+void *
+copy_fifo_list (sizep)
+     int *sizep;
+{
+  void *ret;
+
+  if (nfds == 0 || totfds == 0)
+    {
+      if (sizep)
+	*sizep = 0;
+      return (void *)NULL;
+    }
+
+  if (sizep)
+    *sizep = totfds;
+  ret = xmalloc (totfds * sizeof (pid_t));
+  return (memcpy (ret, dev_fd_list, totfds * sizeof (pid_t)));
+}
+
+static void
+add_fifo_list (fd)
+     int fd;
+{
+  if (dev_fd_list == 0 || fd >= totfds)
+    {
+      int ofds;
+
+      ofds = totfds;
+      totfds = getdtablesize ();
+      if (totfds < 0 || totfds > 256)
+	totfds = 256;
+      if (fd >= totfds)
+	totfds = fd + 2;
+
+      dev_fd_list = (pid_t *)xrealloc (dev_fd_list, totfds * sizeof (dev_fd_list[0]));
+      /* XXX - might need a loop for this */
+      memset (dev_fd_list + ofds, '\0', (totfds - ofds) * sizeof (pid_t));
+    }
+
+  dev_fd_list[fd] = 1;		/* marker; updated later */
+  nfds++;
+}
+
+int
+fifos_pending ()
+{
+  return 0;	/* used for cleanup; not needed with /dev/fd */
+}
+
+int
+num_fifos ()
+{
+  return nfds;
+}
+
+void
+unlink_fifo (fd)
+     int fd;
+{
+  if (dev_fd_list[fd])
+    {
+      close (fd);
+      dev_fd_list[fd] = 0;
+      nfds--;
+    }
+}
+
+void
+unlink_fifo_list ()
+{
+  register int i;
+
+  if (nfds == 0)
+    return;
+
+  for (i = totfds-1; nfds && i >= 0; i--)
+    unlink_fifo (i);
+
+  nfds = 0;
+}
+
+void
+unlink_all_fifos ()
+{
+  unlink_fifo_list ();
+}
+
+/* Take LIST, which is a snapshot copy of dev_fd_list from some point in
+   the past, and close all open fds in dev_fd_list that are not marked
+   as open in LIST.  If LIST is NULL, close everything in dev_fd_list.
+   LSIZE is the number of elements in LIST, in case it's larger than
+   totfds (size of dev_fd_list). */
+void
+close_new_fifos (list, lsize)
+     void *list;
+     int lsize;
+{
+  int i;
+  pid_t *plist;
+
+  if (list == 0)
+    {
+      unlink_fifo_list ();
+      return;
+    }
+
+  for (plist = (pid_t *)list, i = 0; i < lsize; i++)
+    if (plist[i] == 0 && i < totfds && dev_fd_list[i])
+      unlink_fifo (i);
+
+  for (i = lsize; i < totfds; i++)
+    unlink_fifo (i);  
+}
+
+int
+find_procsub_child (pid)
+     pid_t pid;
+{
+  int i;
+
+  if (nfds == 0)
+    return -1;
+
+  for (i = 0; i < totfds; i++)
+    if (dev_fd_list[i] == pid)
+      return i;
+
+  return -1;
+}
+
+void
+set_procsub_status (ind, pid, status)
+     int ind;
+     pid_t pid;
+     int status;
+{
+  if (ind >= 0 && ind < totfds)
+    dev_fd_list[ind] = (pid_t)-1;		/* sentinel */
+}
+
+/* If we've marked the process for this procsub as dead, close the
+   associated file descriptor. */
+static void
+reap_some_procsubs (max)
+     int max;
+{
+  int i;
+
+  for (i = 0; nfds > 0 && i < max; i++)
+    if (dev_fd_list[i] == (pid_t)-1)
+      unlink_fifo (i);
+}
+
+void
+reap_procsubs ()
+{
+  reap_some_procsubs (totfds);
+}
+
+#if 0
+/* UNUSED */
+void
+wait_procsubs ()
+{
+  int i, r;
+
+  for (i = 0; nfds > 0 && i < totfds; i++)
+    {
+      if (dev_fd_list[i] != (pid_t)-1 && dev_fd_list[i] > 0)
+	{
+	  r = wait_for (dev_fd_list[i], 0);
+	  save_proc_status (dev_fd_list[i], r);
+	  dev_fd_list[i] = (pid_t)-1;
+	}
+    }
+}
+#endif
+
+#if defined (NOTDEF)
+print_dev_fd_list ()
+{
+  register int i;
+
+  fprintf (stderr, "pid %ld: dev_fd_list:", (long)getpid ());
+  fflush (stderr);
+
+  for (i = 0; i < totfds; i++)
+    {
+      if (dev_fd_list[i])
+	fprintf (stderr, " %d", i);
+    }
+  fprintf (stderr, "\n");
+}
+#endif /* NOTDEF */
+
+static char *
+make_dev_fd_filename (fd)
+     int fd;
+{
+  char *ret, intbuf[INT_STRLEN_BOUND (int) + 1], *p;
+
+  ret = (char *)xmalloc (sizeof (DEV_FD_PREFIX) + 8);
+
+  strcpy (ret, DEV_FD_PREFIX);
+  p = inttostr (fd, intbuf, sizeof (intbuf));
+  strcpy (ret + sizeof (DEV_FD_PREFIX) - 1, p);
+
+  add_fifo_list (fd);
+  return (ret);
+}
+
+#endif /* HAVE_DEV_FD */
+
+/* Return a filename that will open a connection to the process defined by
+   executing STRING.  HAVE_DEV_FD, if defined, means open a pipe and return
+   a filename in /dev/fd corresponding to a descriptor that is one of the
+   ends of the pipe.  If not defined, we use named pipes on systems that have
+   them.  Systems without /dev/fd and named pipes are out of luck.
+
+   OPEN_FOR_READ_IN_CHILD, if 1, means open the named pipe for reading or
+   use the read end of the pipe and dup that file descriptor to fd 0 in
+   the child.  If OPEN_FOR_READ_IN_CHILD is 0, we open the named pipe for
+   writing or use the write end of the pipe in the child, and dup that
+   file descriptor to fd 1 in the child.  The parent does the opposite. */
+
+static char *
+process_substitute (string, open_for_read_in_child)
+     char *string;
+     int open_for_read_in_child;
+{
+  char *pathname;
+  int fd, result, rc, function_value;
+  pid_t old_pid, pid;
+#if defined (HAVE_DEV_FD)
+  int parent_pipe_fd, child_pipe_fd;
+  int fildes[2];
+#endif /* HAVE_DEV_FD */
+#if defined (JOB_CONTROL)
+  pid_t old_pipeline_pgrp;
+#endif
+
+  if (!string || !*string || wordexp_only)
+    return ((char *)NULL);
+
+#if !defined (HAVE_DEV_FD)
+  pathname = make_named_pipe ();
+#else /* HAVE_DEV_FD */
+  if (pipe (fildes) < 0)
+    {
+      sys_error ("%s", _("cannot make pipe for process substitution"));
+      return ((char *)NULL);
+    }
+  /* If OPEN_FOR_READ_IN_CHILD == 1, we want to use the write end of
+     the pipe in the parent, otherwise the read end. */
+  parent_pipe_fd = fildes[open_for_read_in_child];
+  child_pipe_fd = fildes[1 - open_for_read_in_child];
+  /* Move the parent end of the pipe to some high file descriptor, to
+     avoid clashes with FDs used by the script. */
+  parent_pipe_fd = move_to_high_fd (parent_pipe_fd, 1, 64);
+
+  pathname = make_dev_fd_filename (parent_pipe_fd);
+#endif /* HAVE_DEV_FD */
+
+  if (pathname == 0)
+    {
+      sys_error ("%s", _("cannot make pipe for process substitution"));
+      return ((char *)NULL);
+    }
+
+  old_pid = last_made_pid;
+
+#if defined (JOB_CONTROL)
+  old_pipeline_pgrp = pipeline_pgrp;
+  if (pipeline_pgrp == 0 || (subshell_environment & (SUBSHELL_PIPE|SUBSHELL_FORK|SUBSHELL_ASYNC)) == 0)
+    pipeline_pgrp = shell_pgrp;
+  save_pipeline (1);
+#endif /* JOB_CONTROL */
+
+  pid = make_child ((char *)NULL, FORK_ASYNC);
+  if (pid == 0)
+    {
+#if 0
+      int old_interactive;
+
+      old_interactive = interactive;
+#endif
+      /* The currently-executing shell is not interactive */
+      interactive = 0;
+
+      reset_terminating_signals ();	/* XXX */
+      free_pushed_string_input ();
+      /* Cancel traps, in trap.c. */
+      restore_original_signals ();	/* XXX - what about special builtins? bash-4.2 */
+      QUIT;	/* catch any interrupts we got post-fork */
+      setup_async_signals ();
+#if 0
+      if (open_for_read_in_child == 0 && old_interactive && (bash_input.type == st_stdin || bash_input.type == st_stream))
+	async_redirect_stdin ();
+#endif
+
+      subshell_environment |= SUBSHELL_COMSUB|SUBSHELL_PROCSUB|SUBSHELL_ASYNC;
+
+      /* We don't inherit the verbose option for command substitutions now, so
+	 let's try it for process substitutions. */
+      change_flag ('v', FLAG_OFF);
+
+      /* if we're expanding a redirection, we shouldn't have access to the
+	 temporary environment, but commands in the subshell should have
+	 access to their own temporary environment. */
+      if (expanding_redir)
+        flush_temporary_env ();
+    }
+
+#if defined (JOB_CONTROL)
+  set_sigchld_handler ();
+  stop_making_children ();
+  /* XXX - should we only do this in the parent? (as in command subst) */
+  pipeline_pgrp = old_pipeline_pgrp;
+#else
+  stop_making_children ();
+#endif /* JOB_CONTROL */
+
+  if (pid < 0)
+    {
+      sys_error ("%s", _("cannot make child for process substitution"));
+      free (pathname);
+#if defined (HAVE_DEV_FD)
+      close (parent_pipe_fd);
+      close (child_pipe_fd);
+#endif /* HAVE_DEV_FD */
+#if defined (JOB_CONTROL)
+      restore_pipeline (1);
+#endif
+      return ((char *)NULL);
+    }
+
+  if (pid > 0)
+    {
+#if defined (JOB_CONTROL)
+      last_procsub_child = restore_pipeline (0);
+      /* We assume that last_procsub_child->next == last_procsub_child because
+	 of how jobs.c:add_process() works. */
+      last_procsub_child->next = 0;
+      procsub_add (last_procsub_child);
+#endif
+
+#if defined (HAVE_DEV_FD)
+      dev_fd_list[parent_pipe_fd] = pid;
+#else
+      fifo_list[nfifo-1].proc = pid;
+#endif
+
+      last_made_pid = old_pid;
+
+#if defined (JOB_CONTROL) && defined (PGRP_PIPE)
+      close_pgrp_pipe ();
+#endif /* JOB_CONTROL && PGRP_PIPE */
+
+#if defined (HAVE_DEV_FD)
+      close (child_pipe_fd);
+#endif /* HAVE_DEV_FD */
+
+      return (pathname);
+    }
+
+  set_sigint_handler ();
+
+#if defined (JOB_CONTROL)
+  /* make sure we don't have any job control */
+  set_job_control (0);
+
+  /* Clear out any existing list of process substitutions */
+  procsub_clear ();
+
+  /* The idea is that we want all the jobs we start from an async process
+     substitution to be in the same process group, but not the same pgrp
+     as our parent shell, since we don't want to affect our parent shell's
+     jobs if we get a SIGHUP and end up calling hangup_all_jobs, for example.
+     If pipeline_pgrp != shell_pgrp, we assume that there is a job control
+     shell somewhere in our parent process chain (since make_child initializes
+     pipeline_pgrp to shell_pgrp if job_control == 0). What we do in this
+     case is to set pipeline_pgrp to our PID, so all jobs started by this
+     process have that same pgrp and we are basically the process group leader.
+     This should not have negative effects on child processes surviving
+     after we exit, since we wait for the children we create, but that is
+     something to watch for. */
+
+  if (pipeline_pgrp != shell_pgrp)
+    pipeline_pgrp = getpid ();
+#endif /* JOB_CONTROL */
+
+#if !defined (HAVE_DEV_FD)
+  /* Open the named pipe in the child. */
+  fd = open (pathname, open_for_read_in_child ? O_RDONLY : O_WRONLY);
+  if (fd < 0)
+    {
+      /* Two separate strings for ease of translation. */
+      if (open_for_read_in_child)
+	sys_error (_("cannot open named pipe %s for reading"), pathname);
+      else
+	sys_error (_("cannot open named pipe %s for writing"), pathname);
+
+      exit (127);
+    }
+  if (open_for_read_in_child)
+    {
+      if (sh_unset_nodelay_mode (fd) < 0)
+	{
+	  sys_error (_("cannot reset nodelay mode for fd %d"), fd);
+	  exit (127);
+	}
+    }
+#else /* HAVE_DEV_FD */
+  fd = child_pipe_fd;
+#endif /* HAVE_DEV_FD */
+
+  /* Discard  buffered stdio output before replacing the underlying file
+     descriptor. */
+  if (open_for_read_in_child == 0)
+    fpurge (stdout);
+
+  if (dup2 (fd, open_for_read_in_child ? 0 : 1) < 0)
+    {
+      sys_error (_("cannot duplicate named pipe %s as fd %d"), pathname,
+	open_for_read_in_child ? 0 : 1);
+      exit (127);
+    }
+
+  if (fd != (open_for_read_in_child ? 0 : 1))
+    close (fd);
+
+  /* Need to close any files that this process has open to pipes inherited
+     from its parent. */
+  if (current_fds_to_close)
+    {
+      close_fd_bitmap (current_fds_to_close);
+      current_fds_to_close = (struct fd_bitmap *)NULL;
+    }
+
+#if defined (HAVE_DEV_FD)
+  /* Make sure we close the parent's end of the pipe and clear the slot
+     in the fd list so it is not closed later, if reallocated by, for
+     instance, pipe(2). */
+  close (parent_pipe_fd);
+  dev_fd_list[parent_pipe_fd] = 0;
+#endif /* HAVE_DEV_FD */
+
+  /* subshells shouldn't have this flag, which controls using the temporary
+     environment for variable lookups.  We have already flushed the temporary
+     environment above in the case we're expanding a redirection, so processes
+     executed by this command need to be able to set it independently of their
+     parent. */
+  expanding_redir = 0;
+
+  remove_quoted_escapes (string);
+
+#if 0 /* TAG: bash-5.2 */
+  startup_state = 2;	/* see if we can avoid a fork */
+  parse_and_execute_level = 0;
+#endif
+
+  /* Give process substitution a place to jump back to on failure,
+     so we don't go back up to main (). */
+  result = setjmp_nosigs (top_level);
+
+  /* If we're running a process substitution inside a shell function,
+     trap `return' so we don't return from the function in the subshell
+     and go off to never-never land. */
+  if (result == 0 && return_catch_flag)
+    function_value = setjmp_nosigs (return_catch);
+  else
+    function_value = 0;
+
+  if (result == ERREXIT)
+    rc = last_command_exit_value;
+  else if (result == EXITPROG)
+    rc = last_command_exit_value;
+  else if (result)
+    rc = EXECUTION_FAILURE;
+  else if (function_value)
+    rc = return_catch_value;
+  else
+    {
+      subshell_level++;
+      rc = parse_and_execute (string, "process substitution", (SEVAL_NONINT|SEVAL_NOHIST));
+      /* leave subshell level intact for any exit trap */
+    }
+
+#if !defined (HAVE_DEV_FD)
+  /* Make sure we close the named pipe in the child before we exit. */
+  close (open_for_read_in_child ? 0 : 1);
+#endif /* !HAVE_DEV_FD */
+
+  last_command_exit_value = rc;
+  rc = run_exit_trap ();
+  exit (rc);
+  /*NOTREACHED*/
+}
+#endif /* PROCESS_SUBSTITUTION */
+
+/***********************************/
+/*				   */
+/*	Command Substitution	   */
+/*				   */
+/***********************************/
+
+static char *
+read_comsub (fd, quoted, flags, rflag)
+     int fd, quoted, flags;
+     int *rflag;
+{
+  char *istring, buf[512], *bufp;
+  int istring_index, c, tflag, skip_ctlesc, skip_ctlnul;
+  int mb_cur_max;
+  size_t istring_size;
+  ssize_t bufn;
+  int nullbyte;
+#if defined (HANDLE_MULTIBYTE)
+  mbstate_t ps;
+  wchar_t wc;
+  size_t mblen;
+  int i;
+#endif
+
+  istring = (char *)NULL;
+  istring_index = istring_size = bufn = tflag = 0;
+
+  skip_ctlesc = ifs_cmap[CTLESC];
+  skip_ctlnul = ifs_cmap[CTLNUL];
+
+  mb_cur_max = MB_CUR_MAX;
+  nullbyte = 0;
+
+  /* Read the output of the command through the pipe. */
+  while (1)
+    {
+      if (fd < 0)
+	break;
+      if (--bufn <= 0)
+	{
+	  bufn = zread (fd, buf, sizeof (buf));
+	  if (bufn <= 0) 
+	    break;
+	  bufp = buf;
+	}
+      c = *bufp++;
+
+      if (c == 0)
+	{
+#if 1
+	  if (nullbyte == 0)
+	    {
+	      internal_warning ("%s", _("command substitution: ignored null byte in input"));
+	      nullbyte = 1;
+	    }
+#endif
+	  continue;
+	}
+
+      /* Add the character to ISTRING, possibly after resizing it. */
+      RESIZE_MALLOCED_BUFFER (istring, istring_index, mb_cur_max+1, istring_size, 512);
+
+      /* This is essentially quote_string inline */
+      if ((quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) /* || c == CTLESC || c == CTLNUL */)
+	istring[istring_index++] = CTLESC;
+      else if ((flags & PF_ASSIGNRHS) && skip_ctlesc && c == CTLESC)
+	istring[istring_index++] = CTLESC;
+      /* Escape CTLESC and CTLNUL in the output to protect those characters
+	 from the rest of the word expansions (word splitting and globbing.)
+	 This is essentially quote_escapes inline. */
+      else if (skip_ctlesc == 0 && c == CTLESC)
+	istring[istring_index++] = CTLESC;
+      else if ((skip_ctlnul == 0 && c == CTLNUL) || (c == ' ' && (ifs_value && *ifs_value == 0)))
+	istring[istring_index++] = CTLESC;
+
+#if defined (HANDLE_MULTIBYTE)
+      if ((locale_utf8locale && (c & 0x80)) ||
+	  (locale_utf8locale == 0 && mb_cur_max > 1 && (unsigned char)c > 127))
+	{
+	  /* read a multibyte character from buf */
+	  /* punt on the hard case for now */
+	  memset (&ps, '\0', sizeof (mbstate_t));
+	  mblen = mbrtowc (&wc, bufp-1, bufn+1, &ps);
+	  if (MB_INVALIDCH (mblen) || mblen == 0 || mblen == 1)
+	    istring[istring_index++] = c;
+	  else
+	    {
+	      istring[istring_index++] = c;
+	      for (i = 0; i < mblen-1; i++)
+		istring[istring_index++] = *bufp++;
+	      bufn -= mblen - 1;
+	    }
+	  continue;
+	}
+#endif
+
+      istring[istring_index++] = c;
+    }
+
+  if (istring)
+    istring[istring_index] = '\0';
+
+  /* If we read no output, just return now and save ourselves some
+     trouble. */
+  if (istring_index == 0)
+    {
+      FREE (istring);
+      if (rflag)
+	*rflag = tflag;
+      return (char *)NULL;
+    }
+
+  /* Strip trailing newlines from the output of the command. */
+  if (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES))
+    {
+      while (istring_index > 0)
+	{
+	  if (istring[istring_index - 1] == '\n')
+	    {
+	      --istring_index;
+
+	      /* If the newline was quoted, remove the quoting char. */
+	      if (istring[istring_index - 1] == CTLESC)
+		--istring_index;
+	    }
+	  else
+	    break;
+	}
+      istring[istring_index] = '\0';
+    }
+  else
+    strip_trailing (istring, istring_index - 1, 1);
+
+  if (rflag)
+    *rflag = tflag;
+  return istring;
+}
+
+/* Perform command substitution on STRING.  This returns a WORD_DESC * with the
+   contained string possibly quoted. */
+WORD_DESC *
+command_substitute (string, quoted, flags)
+     char *string;
+     int quoted;
+     int flags;
+{
+  pid_t pid, old_pid, old_pipeline_pgrp, old_async_pid;
+  char *istring, *s;
+  int result, fildes[2], function_value, pflags, rc, tflag, fork_flags;
+  WORD_DESC *ret;
+  sigset_t set, oset;
+
+  istring = (char *)NULL;
+
+  /* Don't fork () if there is no need to.  In the case of no command to
+     run, just return NULL. */
+#if 1
+  for (s = string; s && *s && (shellblank (*s) || *s == '\n'); s++)
+    ;
+  if (s == 0 || *s == 0)
+    return ((WORD_DESC *)NULL);
+#else
+  if (!string || !*string || (string[0] == '\n' && !string[1]))
+    return ((WORD_DESC *)NULL);
+#endif
+
+  if (wordexp_only && read_but_dont_execute)
+    {
+      last_command_exit_value = EX_WEXPCOMSUB;
+      jump_to_top_level (EXITPROG);
+    }
+
+  /* We're making the assumption here that the command substitution will
+     eventually run a command from the file system.  Since we'll run
+     maybe_make_export_env in this subshell before executing that command,
+     the parent shell and any other shells it starts will have to remake
+     the environment.  If we make it before we fork, other shells won't
+     have to.  Don't bother if we have any temporary variable assignments,
+     though, because the export environment will be remade after this
+     command completes anyway, but do it if all the words to be expanded
+     are variable assignments. */
+  if (subst_assign_varlist == 0 || garglist == 0)
+    maybe_make_export_env ();	/* XXX */
+
+  /* Flags to pass to parse_and_execute() */
+  pflags = (interactive && sourcelevel == 0) ? SEVAL_RESETLINE : 0;
+
+  old_pid = last_made_pid;
+
+  /* Pipe the output of executing STRING into the current shell. */
+  if (pipe (fildes) < 0)
+    {
+      sys_error ("%s", _("cannot make pipe for command substitution"));
+      goto error_exit;
+    }
+
+#if defined (JOB_CONTROL)
+  old_pipeline_pgrp = pipeline_pgrp;
+  /* Don't reset the pipeline pgrp if we're already a subshell in a pipeline. */
+  if ((subshell_environment & SUBSHELL_PIPE) == 0)
+    pipeline_pgrp = shell_pgrp;
+  cleanup_the_pipeline ();
+#endif /* JOB_CONTROL */
+
+  old_async_pid = last_asynchronous_pid;
+  fork_flags = (subshell_environment&SUBSHELL_ASYNC) ? FORK_ASYNC : 0;
+  pid = make_child ((char *)NULL, fork_flags|FORK_NOTERM);
+  last_asynchronous_pid = old_async_pid;
+
+  if (pid == 0)
+    {
+      /* Reset the signal handlers in the child, but don't free the
+	 trap strings.  Set a flag noting that we have to free the
+	 trap strings if we run trap to change a signal disposition. */
+      reset_signal_handlers ();
+      if (ISINTERRUPT)
+	{
+	  kill (getpid (), SIGINT);
+	  CLRINTERRUPT;		/* if we're ignoring SIGINT somehow */
+	}	
+      QUIT;	/* catch any interrupts we got post-fork */
+      subshell_environment |= SUBSHELL_RESETTRAP;
+    }
+
+#if defined (JOB_CONTROL)
+  /* XXX DO THIS ONLY IN PARENT ? XXX */
+  set_sigchld_handler ();
+  stop_making_children ();
+  if (pid != 0)
+    pipeline_pgrp = old_pipeline_pgrp;
+#else
+  stop_making_children ();
+#endif /* JOB_CONTROL */
+
+  if (pid < 0)
+    {
+      sys_error (_("cannot make child for command substitution"));
+    error_exit:
+
+      last_made_pid = old_pid;
+
+      FREE (istring);
+      close (fildes[0]);
+      close (fildes[1]);
+      return ((WORD_DESC *)NULL);
+    }
+
+  if (pid == 0)
+    {
+      /* The currently executing shell is not interactive. */
+      interactive = 0;
+
+      set_sigint_handler ();	/* XXX */
+
+      free_pushed_string_input ();
+
+      /* Discard  buffered stdio output before replacing the underlying file
+	 descriptor. */
+      fpurge (stdout);
+
+      if (dup2 (fildes[1], 1) < 0)
+	{
+	  sys_error ("%s", _("command_substitute: cannot duplicate pipe as fd 1"));
+	  exit (EXECUTION_FAILURE);
+	}
+
+      /* If standard output is closed in the parent shell
+	 (such as after `exec >&-'), file descriptor 1 will be
+	 the lowest available file descriptor, and end up in
+	 fildes[0].  This can happen for stdin and stderr as well,
+	 but stdout is more important -- it will cause no output
+	 to be generated from this command. */
+      if ((fildes[1] != fileno (stdin)) &&
+	  (fildes[1] != fileno (stdout)) &&
+	  (fildes[1] != fileno (stderr)))
+	close (fildes[1]);
+
+      if ((fildes[0] != fileno (stdin)) &&
+	  (fildes[0] != fileno (stdout)) &&
+	  (fildes[0] != fileno (stderr)))
+	close (fildes[0]);
+
+#ifdef __CYGWIN__
+      /* Let stdio know the fd may have changed from text to binary mode, and
+	 make sure to preserve stdout line buffering. */
+      freopen (NULL, "w", stdout);
+      sh_setlinebuf (stdout);
+#endif /* __CYGWIN__ */
+
+      /* This is a subshell environment. */
+      subshell_environment |= SUBSHELL_COMSUB;
+
+      /* Many shells do not appear to inherit the -v option for command
+	 substitutions. */
+      change_flag ('v', FLAG_OFF);
+
+      /* When inherit_errexit option is not enabled, command substitution does
+	 not inherit the -e flag.  It is enabled when Posix mode is enabled */
+      if (inherit_errexit == 0)
+        {
+          builtin_ignoring_errexit = 0;
+	  change_flag ('e', FLAG_OFF);
+        }
+      set_shellopts ();
+
+      /* If we are expanding a redirection, we can dispose of any temporary
+	 environment we received, since redirections are not supposed to have
+	 access to the temporary environment.  We will have to see whether this
+	 affects temporary environments supplied to `eval', but the temporary
+	 environment gets copied to builtin_env at some point. */
+      if (expanding_redir)
+	{
+	  flush_temporary_env ();
+	  expanding_redir = 0;
+	}
+
+      remove_quoted_escapes (string);
+
+      startup_state = 2;	/* see if we can avoid a fork */
+      parse_and_execute_level = 0;
+
+      /* Give command substitution a place to jump back to on failure,
+	 so we don't go back up to main (). */
+      result = setjmp_nosigs (top_level);
+
+      /* If we're running a command substitution inside a shell function,
+	 trap `return' so we don't return from the function in the subshell
+	 and go off to never-never land. */
+      if (result == 0 && return_catch_flag)
+	function_value = setjmp_nosigs (return_catch);
+      else
+	function_value = 0;
+
+      if (result == ERREXIT)
+	rc = last_command_exit_value;
+      else if (result == EXITPROG)
+	rc = last_command_exit_value;
+      else if (result)
+	rc = EXECUTION_FAILURE;
+      else if (function_value)
+	rc = return_catch_value;
+      else
+	{
+	  subshell_level++;
+	  rc = parse_and_execute (string, "command substitution", pflags|SEVAL_NOHIST);
+	  /* leave subshell level intact for any exit trap */
+	}
+
+      last_command_exit_value = rc;
+      rc = run_exit_trap ();
+#if defined (PROCESS_SUBSTITUTION)
+      unlink_fifo_list ();
+#endif
+      exit (rc);
+    }
+  else
+    {
+      int dummyfd;
+
+#if defined (JOB_CONTROL) && defined (PGRP_PIPE)
+      close_pgrp_pipe ();
+#endif /* JOB_CONTROL && PGRP_PIPE */
+
+      close (fildes[1]);
+
+      begin_unwind_frame ("read-comsub");
+      dummyfd = fildes[0];
+      add_unwind_protect (close, dummyfd);
+
+      /* Block SIGINT while we're reading from the pipe. If the child
+	 process gets a SIGINT, it will either handle it or die, and the
+	 read will return. */
+      BLOCK_SIGNAL (SIGINT, set, oset);
+      tflag = 0;
+      istring = read_comsub (fildes[0], quoted, flags, &tflag);
+
+      close (fildes[0]);
+      discard_unwind_frame ("read-comsub");
+      UNBLOCK_SIGNAL (oset);
+
+      current_command_subst_pid = pid;
+      last_command_exit_value = wait_for (pid, JWAIT_NOTERM);
+      last_command_subst_pid = pid;
+      last_made_pid = old_pid;
+
+#if defined (JOB_CONTROL)
+      /* If last_command_exit_value > 128, then the substituted command
+	 was terminated by a signal.  If that signal was SIGINT, then send
+	 SIGINT to ourselves.  This will break out of loops, for instance. */
+      if (last_command_exit_value == (128 + SIGINT) && last_command_exit_signal == SIGINT)
+	kill (getpid (), SIGINT);
+#endif /* JOB_CONTROL */
+
+      ret = alloc_word_desc ();
+      ret->word = istring;
+      ret->flags = tflag;
+
+      return ret;
+    }
+}
+
+/********************************************************
+ *							*
+ *	Utility functions for parameter expansion	*
+ *							*
+ ********************************************************/
+
+#if defined (ARRAY_VARS)
+
+static arrayind_t
+array_length_reference (s)
+     char *s;
+{
+  int len;
+  arrayind_t ind;
+  char *akey;
+  char *t, c;
+  ARRAY *array;
+  HASH_TABLE *h;
+  SHELL_VAR *var;
+
+  var = array_variable_part (s, 0, &t, &len);
+
+  /* If unbound variables should generate an error, report one and return
+     failure. */
+  if ((var == 0 || invisible_p (var) || (assoc_p (var) == 0 && array_p (var) == 0)) && unbound_vars_is_error)
+    {
+      c = *--t;
+      *t = '\0';
+      set_exit_status (EXECUTION_FAILURE);
+      err_unboundvar (s);
+      *t = c;
+      return (-1);
+    }
+  else if (var == 0 || invisible_p (var))
+    return 0;
+
+  /* We support a couple of expansions for variables that are not arrays.
+     We'll return the length of the value for v[0], and 1 for v[@] or
+     v[*].  Return 0 for everything else. */
+
+  array = array_p (var) ? array_cell (var) : (ARRAY *)NULL;
+  h = assoc_p (var) ? assoc_cell (var) : (HASH_TABLE *)NULL;
+
+  if (ALL_ELEMENT_SUB (t[0]) && t[1] == RBRACK)
+    {
+      if (assoc_p (var))
+	return (h ? assoc_num_elements (h) : 0);
+      else if (array_p (var))
+	return (array ? array_num_elements (array) : 0);
+      else
+	return (var_isset (var) ? 1 : 0);
+    }
+
+  if (assoc_p (var))
+    {
+      t[len - 1] = '\0';
+      akey = expand_assignment_string_to_string (t, 0);	/* [ */
+      t[len - 1] = RBRACK;
+      if (akey == 0 || *akey == 0)
+	{
+	  err_badarraysub (t);
+	  FREE (akey);
+	  return (-1);
+	}
+      t = assoc_reference (assoc_cell (var), akey);
+      free (akey);
+    }
+  else
+    {
+      ind = array_expand_index (var, t, len, 0);
+      /* negative subscripts to indexed arrays count back from end */
+      if (var && array_p (var) && ind < 0)
+	ind = array_max_index (array_cell (var)) + 1 + ind;
+      if (ind < 0)
+	{
+	  err_badarraysub (t);
+	  return (-1);
+	}
+      if (array_p (var))
+	t = array_reference (array, ind);
+      else
+	t = (ind == 0) ? value_cell (var) : (char *)NULL;
+    }
+
+  len = MB_STRLEN (t);
+  return (len);
+}
+#endif /* ARRAY_VARS */
+
+static int
+valid_brace_expansion_word (name, var_is_special)
+     char *name;
+     int var_is_special;
+{
+  if (DIGIT (*name) && all_digits (name))
+    return 1;
+  else if (var_is_special)
+    return 1;
+#if defined (ARRAY_VARS)
+  else if (valid_array_reference (name, 0))
+    return 1;
+#endif /* ARRAY_VARS */
+  else if (legal_identifier (name))
+    return 1;
+  else
+    return 0;
+}
+
+static int
+chk_atstar (name, quoted, pflags, quoted_dollar_atp, contains_dollar_at)
+     char *name;
+     int quoted, pflags;
+     int *quoted_dollar_atp, *contains_dollar_at;
+{
+  char *temp1;
+
+  if (name == 0)
+    {
+      if (quoted_dollar_atp)
+	*quoted_dollar_atp = 0;
+      if (contains_dollar_at)
+	*contains_dollar_at = 0;
+      return 0;
+    }
+
+  /* check for $@ and $* */
+  if (name[0] == '@' && name[1] == 0)
+    {
+      if ((quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) && quoted_dollar_atp)
+	*quoted_dollar_atp = 1;
+      if (contains_dollar_at)
+	*contains_dollar_at = 1;
+      return 1;
+    }
+  else if (name[0] == '*' && name[1] == '\0' && quoted == 0)
+    {
+      /* Need more checks here that parallel what string_list_pos_params and
+	 param_expand do. Check expand_no_split_dollar_star and ??? */
+      if (contains_dollar_at && expand_no_split_dollar_star == 0)
+	*contains_dollar_at = 1;
+      return 1;
+    }
+
+  /* Now check for ${array[@]} and ${array[*]} */
+#if defined (ARRAY_VARS)
+  else if (valid_array_reference (name, 0))
+    {
+      temp1 = mbschr (name, LBRACK);
+      if (temp1 && temp1[1] == '@' && temp1[2] == RBRACK)
+	{
+	  if ((quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) && quoted_dollar_atp)
+	    *quoted_dollar_atp = 1;
+	  if (contains_dollar_at)
+	    *contains_dollar_at = 1;
+	  return 1;
+	}
+      /* ${array[*]}, when unquoted, should be treated like ${array[@]},
+	 which should result in separate words even when IFS is unset. */
+      if (temp1 && temp1[1] == '*' && temp1[2] == RBRACK && quoted == 0)
+	{
+	  if (contains_dollar_at)
+	    *contains_dollar_at = 1;
+	  return 1;
+	}
+    }
+#endif
+  return 0;
+}
+
+/* Parameter expand NAME, and return a new string which is the expansion,
+   or NULL if there was no expansion.  NAME is as given in ${NAMEcWORD}.
+   VAR_IS_SPECIAL is non-zero if NAME is one of the special variables in
+   the shell, e.g., "@", "$", "*", etc.  QUOTED, if non-zero, means that
+   NAME was found inside of a double-quoted expression. */
+static WORD_DESC *
+parameter_brace_expand_word (name, var_is_special, quoted, pflags, indp)
+     char *name;
+     int var_is_special, quoted, pflags;
+     arrayind_t *indp;
+{
+  WORD_DESC *ret;
+  char *temp, *tt;
+  intmax_t arg_index;
+  SHELL_VAR *var;
+  int atype, rflags;
+  arrayind_t ind;
+
+  ret = 0;
+  temp = 0;
+  rflags = 0;
+
+  if (indp)
+    *indp = INTMAX_MIN;
+
+  /* Handle multiple digit arguments, as in ${11}. */  
+  if (legal_number (name, &arg_index))
+    {
+      tt = get_dollar_var_value (arg_index);
+      if (tt)
+ 	temp = (*tt && (quoted & (Q_DOUBLE_QUOTES|Q_HERE_DOCUMENT)))
+ 		  ? quote_string (tt)
+ 		  : quote_escapes (tt);
+      else
+        temp = (char *)NULL;
+      FREE (tt);
+    }
+  else if (var_is_special)      /* ${@} */
+    {
+      int sindex;
+      tt = (char *)xmalloc (2 + strlen (name));
+      tt[sindex = 0] = '$';
+      strcpy (tt + 1, name);
+
+      ret = param_expand (tt, &sindex, quoted, (int *)NULL, (int *)NULL,
+			  (int *)NULL, (int *)NULL, pflags);
+      free (tt);
+    }
+#if defined (ARRAY_VARS)
+  else if (valid_array_reference (name, 0))
+    {
+expand_arrayref:
+      var = array_variable_part (name, 0, &tt, (int *)0);
+      /* These are the cases where word splitting will not be performed */
+      if (pflags & PF_ASSIGNRHS)
+	{
+	  if (ALL_ELEMENT_SUB (tt[0]) && tt[1] == RBRACK)
+	    {
+	      /* Only treat as double quoted if array variable */
+	      if (var && (array_p (var) || assoc_p (var)))
+		temp = array_value (name, quoted|Q_DOUBLE_QUOTES, AV_ASSIGNRHS, &atype, &ind);
+	      else		
+		temp = array_value (name, quoted, 0, &atype, &ind);
+	    }
+	  else
+	    temp = array_value (name, quoted, 0, &atype, &ind);
+	}
+      /* Posix interp 888 */
+      else if (pflags & PF_NOSPLIT2)
+	{
+	  /* Special cases, then general case, for each of A[@], A[*], A[n] */
+#if defined (HANDLE_MULTIBYTE)
+          if (tt[0] == '@' && tt[1] == RBRACK && var && quoted == 0 && ifs_is_set && ifs_is_null == 0 && ifs_firstc[0] != ' ')
+#else
+	  if (tt[0] == '@' && tt[1] == RBRACK && var && quoted == 0 && ifs_is_set && ifs_is_null == 0 && ifs_firstc != ' ')
+#endif
+	    temp = array_value (name, Q_DOUBLE_QUOTES, AV_ASSIGNRHS, &atype, &ind);
+	  else if (tt[0] == '@' && tt[1] == RBRACK)
+	    temp = array_value (name, quoted, 0, &atype, &ind);
+	  else if (tt[0] == '*' && tt[1] == RBRACK && expand_no_split_dollar_star && ifs_is_null)
+	    temp = array_value (name, Q_DOUBLE_QUOTES|Q_HERE_DOCUMENT, 0, &atype, &ind);
+	  else if (tt[0] == '*' && tt[1] == RBRACK)
+	    temp = array_value (name, quoted, 0, &atype, &ind);
+	  else
+	    temp = array_value (name, quoted, 0, &atype, &ind);
+	}	  	  
+      else if (tt[0] == '*' && tt[1] == RBRACK && expand_no_split_dollar_star && ifs_is_null)
+	temp = array_value (name, Q_DOUBLE_QUOTES|Q_HERE_DOCUMENT, 0, &atype, &ind);
+      else
+	temp = array_value (name, quoted, 0, &atype, &ind);
+      if (atype == 0 && temp)
+	{
+	  temp = (*temp && (quoted & (Q_DOUBLE_QUOTES|Q_HERE_DOCUMENT)))
+		    ? quote_string (temp)
+		    : quote_escapes (temp);
+	  rflags |= W_ARRAYIND;
+	  if (indp)
+	    *indp = ind;
+	} 		  
+      else if (atype == 1 && temp && QUOTED_NULL (temp) && (quoted & (Q_DOUBLE_QUOTES|Q_HERE_DOCUMENT)))
+	rflags |= W_HASQUOTEDNULL;
+    }
+#endif
+  else if (var = find_variable (name))
+    {
+      if (var_isset (var) && invisible_p (var) == 0)
+	{
+#if defined (ARRAY_VARS)
+	  /* We avoid a memory leak by saving TT as the memory allocated by
+	     assoc_to_string or array_to_string and leaving it 0 otherwise,
+	     then freeing TT after quoting temp. */
+	  tt = (char *)NULL;
+	  if ((pflags & PF_ALLINDS) && assoc_p (var))
+	    tt = temp = assoc_empty (assoc_cell (var)) ? (char *)NULL : assoc_to_string (assoc_cell (var), " ", quoted);
+	  else if ((pflags & PF_ALLINDS) && array_p (var))
+	    tt = temp = array_empty (array_cell (var)) ? (char *)NULL : array_to_string (array_cell (var), " ", quoted);
+	  else if (assoc_p (var))
+	    temp = assoc_reference (assoc_cell (var), "0");
+	  else if (array_p (var))
+	    temp = array_reference (array_cell (var), 0);
+	  else
+	    temp = value_cell (var);
+#else
+	  temp = value_cell (var);
+#endif
+
+	  if (temp)
+	    temp = (*temp && (quoted & (Q_DOUBLE_QUOTES|Q_HERE_DOCUMENT)))
+		      ? quote_string (temp)
+		      : ((pflags & PF_ASSIGNRHS) ? quote_rhs (temp)
+						 : quote_escapes (temp));
+	  FREE (tt);
+	}
+      else
+	temp = (char *)NULL;
+    }
+  else if (var = find_variable_last_nameref (name, 0))
+    {
+      temp = nameref_cell (var);
+#if defined (ARRAY_VARS)
+      /* Handle expanding nameref whose value is x[n] */
+      if (temp && *temp && valid_array_reference (temp, 0))
+	{
+	  name = temp;
+	  goto expand_arrayref;
+	}
+      else
+#endif
+      /* y=2 ; typeset -n x=y; echo ${x} is not the same as echo ${2} in ksh */
+      if (temp && *temp && legal_identifier (temp) == 0)
+        {
+	  set_exit_status (EXECUTION_FAILURE);
+	  report_error (_("%s: invalid variable name for name reference"), temp);
+	  temp = &expand_param_error;
+        }
+      else
+	temp = (char *)NULL;
+    }
+  else
+    temp = (char *)NULL;
+
+  if (ret == 0)
+    {
+      ret = alloc_word_desc ();
+      ret->word = temp;
+      ret->flags |= rflags;
+    }
+  return ret;
+}
+
+static char *
+parameter_brace_find_indir (name, var_is_special, quoted, find_nameref)
+     char *name;
+     int var_is_special, quoted, find_nameref;
+{
+  char *temp, *t;
+  WORD_DESC *w;
+  SHELL_VAR *v;
+  int pflags, oldex;
+
+  if (find_nameref && var_is_special == 0 && (v = find_variable_last_nameref (name, 0)) &&
+      nameref_p (v) && (t = nameref_cell (v)) && *t)
+    return (savestring (t));
+
+  /* If var_is_special == 0, and name is not an array reference, this does
+     more expansion than necessary.  It should really look up the variable's
+     value and not try to expand it. */
+  pflags = PF_IGNUNBOUND;
+  /* Note that we're not going to be doing word splitting here */
+  if (var_is_special)
+    {
+      pflags |= PF_ASSIGNRHS;	/* suppresses word splitting */
+      oldex = expand_no_split_dollar_star;
+      expand_no_split_dollar_star = 1;
+    }
+  w = parameter_brace_expand_word (name, var_is_special, quoted, pflags, 0);
+  if (var_is_special)
+    expand_no_split_dollar_star = oldex;
+
+  t = w->word;
+  /* Have to dequote here if necessary */
+  if (t)
+    {
+      temp = ((quoted & (Q_DOUBLE_QUOTES|Q_HERE_DOCUMENT)) || var_is_special)
+		? dequote_string (t)
+		: dequote_escapes (t);
+      free (t);
+      t = temp;
+    }
+  dispose_word_desc (w);
+
+  return t;
+}
+  
+/* Expand an indirect reference to a variable: ${!NAME} expands to the
+   value of the variable whose name is the value of NAME. */
+static WORD_DESC *
+parameter_brace_expand_indir (name, var_is_special, quoted, pflags, quoted_dollar_atp, contains_dollar_at)
+     char *name;
+     int var_is_special, quoted, pflags;
+     int *quoted_dollar_atp, *contains_dollar_at;
+{
+  char *t;
+  WORD_DESC *w;
+  SHELL_VAR *v;
+
+  /* See if it's a nameref first, behave in ksh93-compatible fashion.
+     There is at least one incompatibility: given ${!foo[0]} where foo=bar,
+     bash performs an indirect lookup on foo[0] and expands the result;
+     ksh93 expands bar[0].  We could do that here -- there are enough usable
+     primitives to do that -- but do not at this point. */
+  if (var_is_special == 0 && (v = find_variable_last_nameref (name, 0)))
+    {
+      if (nameref_p (v) && (t = nameref_cell (v)) && *t)
+	{
+	  w = alloc_word_desc ();
+	  w->word = savestring (t);
+	  w->flags = 0;
+	  return w;
+	}
+    }
+
+  /* An indirect reference to a positional parameter or a special parameter
+     is ok.  Indirect references to array references, as explained above, are
+     ok (currently).  Only references to unset variables are errors at this
+     point. */
+  if (legal_identifier (name) && v == 0)
+    {
+      report_error (_("%s: invalid indirect expansion"), name);
+      w = alloc_word_desc ();
+      w->word = &expand_param_error;
+      w->flags = 0;
+      return (w);
+    }
+      
+  t = parameter_brace_find_indir (name, var_is_special, quoted, 0);
+
+  chk_atstar (t, quoted, pflags, quoted_dollar_atp, contains_dollar_at);
+
+#if defined (ARRAY_VARS)
+  /* Array references to unset variables are also an error */
+  if (t == 0 && valid_array_reference (name, 0))
+    {
+      v = array_variable_part (name, 0, (char **)0, (int *)0);
+      if (v == 0)
+	{
+	  report_error (_("%s: invalid indirect expansion"), name);
+	  w = alloc_word_desc ();
+	  w->word = &expand_param_error;
+	  w->flags = 0;
+	  return (w);
+	}
+      else
+        return (WORD_DESC *)NULL;      
+    }
+#endif
+
+  if (t == 0)
+    return (WORD_DESC *)NULL;
+
+  if (valid_brace_expansion_word (t, SPECIAL_VAR (t, 0)) == 0)
+    {
+      report_error (_("%s: invalid variable name"), t);
+      free (t);
+      w = alloc_word_desc ();
+      w->word = &expand_param_error;
+      w->flags = 0;
+      return (w);
+    }
+	
+  w = parameter_brace_expand_word (t, SPECIAL_VAR(t, 0), quoted, pflags, 0);
+  free (t);
+
+  return w;
+}
+
+/* Expand the right side of a parameter expansion of the form ${NAMEcVALUE},
+   depending on the value of C, the separating character.  C can be one of
+   "-", "+", or "=".  QUOTED is true if the entire brace expression occurs
+   between double quotes. */
+static WORD_DESC *
+parameter_brace_expand_rhs (name, value, op, quoted, pflags, qdollaratp, hasdollarat)
+     char *name, *value;
+     int op, quoted, pflags, *qdollaratp, *hasdollarat;
+{
+  WORD_DESC *w;
+  WORD_LIST *l, *tl;
+  char *t, *t1, *temp, *vname;
+  int l_hasdollat, sindex;
+  SHELL_VAR *v;
+
+/*itrace("parameter_brace_expand_rhs: %s:%s pflags = %d", name, value, pflags);*/
+  /* If the entire expression is between double quotes, we want to treat
+     the value as a double-quoted string, with the exception that we strip
+     embedded unescaped double quotes (for sh backwards compatibility). */
+  if ((quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) && *value)
+    {
+      sindex = 0;
+      temp = string_extract_double_quoted (value, &sindex, SX_STRIPDQ);
+    }
+  else
+    temp = value;
+
+  w = alloc_word_desc ();
+  l_hasdollat = 0;
+  l = *temp ? expand_string_for_rhs (temp, quoted, op, pflags, &l_hasdollat, (int *)NULL)
+	    : (WORD_LIST *)0;
+  if (hasdollarat)
+    *hasdollarat = l_hasdollat || (l && l->next);
+  if (temp != value)
+    free (temp);
+
+  /* list_string takes multiple CTLNULs and turns them into an empty word
+     with W_SAWQUOTEDNULL set. Turn it back into a single CTLNUL for the
+     rest of this function and the caller. */
+  for (tl = l; tl; tl = tl->next)
+    {
+      if (tl->word && (tl->word->word == 0 || tl->word->word[0] == 0) &&
+	    (tl->word->flags | W_SAWQUOTEDNULL))
+	{
+	  t = make_quoted_char ('\0');
+	  FREE (tl->word->word);
+	  tl->word->word = t;
+	  tl->word->flags |= W_QUOTED|W_HASQUOTEDNULL;
+	  tl->word->flags &= ~W_SAWQUOTEDNULL;
+	}
+    }
+
+  if (l)
+    {
+      /* If l->next is not null, we know that TEMP contained "$@", since that
+	 is the only expansion that creates more than one word. */
+      if (qdollaratp && ((l_hasdollat && quoted) || l->next))
+	{
+/*itrace("parameter_brace_expand_rhs: %s:%s: l != NULL, set *qdollaratp", name, value);*/
+	  *qdollaratp = 1;
+	}
+
+      /* The expansion of TEMP returned something.  We need to treat things
+	  slightly differently if L_HASDOLLAT is non-zero.  If we have "$@",
+	  the individual words have already been quoted.  We need to turn them
+	  into a string with the words separated by the first character of
+	  $IFS without any additional quoting, so string_list_dollar_at won't
+	  do the right thing.  If IFS is null, we want "$@" to split into
+	  separate arguments, not be concatenated, so we use string_list_internal
+	  and mark the word to be split on spaces later.  We use
+	  string_list_dollar_star for "$@" otherwise. */
+      if (l->next && ifs_is_null)
+	{
+	  temp = string_list_internal (l, " ");
+	  w->flags |= W_SPLITSPACE;
+	}
+      else if (l_hasdollat || l->next)
+	temp = string_list_dollar_star (l, quoted, 0);
+      else
+	{
+	  temp = string_list (l);
+	  if (temp && (QUOTED_NULL (temp) == 0) && (l->word->flags & W_SAWQUOTEDNULL))
+	    w->flags |= W_SAWQUOTEDNULL;	/* XXX */
+	}
+
+      /* If we have a quoted null result (QUOTED_NULL(temp)) and the word is
+	 a quoted null (l->next == 0 && QUOTED_NULL(l->word->word)), the
+	 flags indicate it (l->word->flags & W_HASQUOTEDNULL), and the
+	 expansion is quoted (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES))
+	 (which is more paranoia than anything else), we need to return the
+	 quoted null string and set the flags to indicate it. */
+      if (l->next == 0 && (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) && QUOTED_NULL (temp) && QUOTED_NULL (l->word->word) && (l->word->flags & W_HASQUOTEDNULL))
+	{
+	  w->flags |= W_HASQUOTEDNULL;
+/*itrace("parameter_brace_expand_rhs (%s:%s): returning quoted null, turning off qdollaratp", name, value);*/
+	  /* If we return a quoted null with L_HASDOLLARAT, we either have a
+	     construct like "${@-$@}" or "${@-${@-$@}}" with no positional
+	     parameters or a quoted expansion of "$@" with $1 == ''.  In either
+	     case, we don't want to enable special handling of $@. */
+	  if (qdollaratp && l_hasdollat)
+	    *qdollaratp = 0;
+	}
+      dispose_words (l);
+    }
+  else if ((quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) && l_hasdollat)
+    {
+      /* Posix interp 221 changed the rules on this.  The idea is that
+	 something like "$xxx$@" should expand the same as "${foo-$xxx$@}"
+	 when foo and xxx are unset.  The problem is that it's not in any
+	 way backwards compatible and few other shells do it.  We're eventually
+	 going to try and split the difference (heh) a little bit here. */
+      /* l_hasdollat == 1 means we saw a quoted dollar at.  */
+
+      /* The brace expansion occurred between double quotes and there was
+	 a $@ in TEMP.  It does not matter if the $@ is quoted, as long as
+	 it does not expand to anything.  In this case, we want to return
+	 a quoted empty string.  Posix interp 888 */
+      temp = make_quoted_char ('\0');
+      w->flags |= W_HASQUOTEDNULL;
+/*itrace("parameter_brace_expand_rhs (%s:%s): returning quoted null", name, value);*/
+    }
+  else
+    temp = (char *)NULL;
+
+  if (op == '-' || op == '+')
+    {
+      w->word = temp;
+      return w;
+    }
+
+  /* op == '=' */
+  t1 = temp ? dequote_string (temp) : savestring ("");
+  free (temp);
+
+  /* bash-4.4/5.0 */
+  vname = name;
+  if (*name == '!' &&
+      (legal_variable_starter ((unsigned char)name[1]) || DIGIT (name[1]) || VALID_INDIR_PARAM (name[1])))
+    {
+      vname = parameter_brace_find_indir (name + 1, SPECIAL_VAR (name, 1), quoted, 1);
+      if (vname == 0 || *vname == 0)
+	{
+	  report_error (_("%s: invalid indirect expansion"), name);
+	  free (vname);
+	  free (t1);
+	  dispose_word (w);
+	  return &expand_wdesc_error;
+	}
+      if (legal_identifier (vname) == 0)
+	{
+	  report_error (_("%s: invalid variable name"), vname);
+	  free (vname);
+	  free (t1);
+	  dispose_word (w);
+	  return &expand_wdesc_error;
+	}
+    }
+    
+#if defined (ARRAY_VARS)
+  if (valid_array_reference (vname, 0))
+    v = assign_array_element (vname, t1, 0);
+  else
+#endif /* ARRAY_VARS */
+  v = bind_variable (vname, t1, 0);
+
+  if (v == 0 || readonly_p (v) || noassign_p (v))	/* expansion error  */
+    {
+      if ((v == 0 || readonly_p (v)) && interactive_shell == 0 && posixly_correct)
+	{
+	  last_command_exit_value = EXECUTION_FAILURE;
+	  exp_jump_to_top_level (FORCE_EOF);
+	}
+      else
+	{
+	  if (vname != name)
+	    free (vname);
+	  last_command_exit_value = EX_BADUSAGE;
+	  exp_jump_to_top_level (DISCARD);
+	}
+    }
+
+  stupidly_hack_special_variables (vname);
+
+  if (vname != name)
+    free (vname);
+
+  /* From Posix group discussion Feb-March 2010.  Issue 7 0000221 */
+
+  /* If we are double-quoted or if we are not going to be performing word
+     splitting, we want to quote the value we return appropriately, like
+     the other expansions this function handles. */
+  w->word = (quoted & (Q_DOUBLE_QUOTES|Q_HERE_DOCUMENT)) ? quote_string (t1) : quote_escapes (t1);
+  /* If we have something that's non-null, that's not a quoted null string,
+     and we're not going to be performing word splitting (we know we're not
+     because the operator is `='), we can forget we saw a quoted null. */
+  if (w->word && w->word[0] && QUOTED_NULL (w->word) == 0)
+    w->flags &= ~W_SAWQUOTEDNULL;
+  free (t1);
+
+  /* If we convert a null string into a quoted null, make sure the caller
+     knows it. */
+  if ((quoted & (Q_DOUBLE_QUOTES|Q_HERE_DOCUMENT)) && QUOTED_NULL (w->word))
+    w->flags |= W_HASQUOTEDNULL;
+
+  return w;
+}
+
+/* Deal with the right hand side of a ${name:?value} expansion in the case
+   that NAME is null or not set.  If VALUE is non-null it is expanded and
+   used as the error message to print, otherwise a standard message is
+   printed. */
+static void
+parameter_brace_expand_error (name, value, check_null)
+     char *name, *value;
+     int check_null;
+{
+  WORD_LIST *l;
+  char *temp;
+
+  set_exit_status (EXECUTION_FAILURE);	/* ensure it's non-zero */
+  if (value && *value)
+    {
+      l = expand_string (value, 0);
+      temp =  string_list (l);
+      report_error ("%s: %s", name, temp ? temp : "");	/* XXX was value not "" */
+      FREE (temp);
+      dispose_words (l);
+    }
+  else if (check_null == 0)
+    report_error (_("%s: parameter not set"), name);
+  else
+    report_error (_("%s: parameter null or not set"), name);
+
+  /* Free the data we have allocated during this expansion, since we
+     are about to longjmp out. */
+  free (name);
+  FREE (value);
+}
+
+/* Return 1 if NAME is something for which parameter_brace_expand_length is
+   OK to do. */
+static int
+valid_length_expression (name)
+     char *name;
+{
+  return (name[1] == '\0' ||					/* ${#} */
+	  ((sh_syntaxtab[(unsigned char) name[1]] & CSPECVAR) && name[2] == '\0') ||  /* special param */
+	  (DIGIT (name[1]) && all_digits (name + 1)) ||	/* ${#11} */
+#if defined (ARRAY_VARS)
+	  valid_array_reference (name + 1, 0) ||		/* ${#a[7]} */
+#endif
+	  legal_identifier (name + 1));				/* ${#PS1} */
+}
+
+/* Handle the parameter brace expansion that requires us to return the
+   length of a parameter. */
+static intmax_t
+parameter_brace_expand_length (name)
+     char *name;
+{
+  char *t, *newname;
+  intmax_t number, arg_index;
+  WORD_LIST *list;
+  SHELL_VAR *var;
+
+  var = (SHELL_VAR *)NULL;
+
+  if (name[1] == '\0')			/* ${#} */
+    number = number_of_args ();
+  else if (DOLLAR_AT_STAR (name[1]) && name[2] == '\0')	/* ${#@}, ${#*} */
+    number = number_of_args ();
+  else if ((sh_syntaxtab[(unsigned char) name[1]] & CSPECVAR) && name[2] == '\0')
+    {
+      /* Take the lengths of some of the shell's special parameters. */
+      switch (name[1])
+	{
+	case '-':
+	  t = which_set_flags ();
+	  break;
+	case '?':
+	  t = itos (last_command_exit_value);
+	  break;
+	case '$':
+	  t = itos (dollar_dollar_pid);
+	  break;
+	case '!':
+	  if (last_asynchronous_pid == NO_PID)
+	    t = (char *)NULL;	/* XXX - error if set -u set? */
+	  else
+	    t = itos (last_asynchronous_pid);
+	  break;
+	case '#':
+	  t = itos (number_of_args ());
+	  break;
+	}
+      number = STRLEN (t);
+      FREE (t);
+    }
+#if defined (ARRAY_VARS)
+  else if (valid_array_reference (name + 1, 0))
+    number = array_length_reference (name + 1);
+#endif /* ARRAY_VARS */
+  else
+    {
+      number = 0;
+
+      if (legal_number (name + 1, &arg_index))		/* ${#1} */
+	{
+	  t = get_dollar_var_value (arg_index);
+	  if (t == 0 && unbound_vars_is_error)
+	    return INTMAX_MIN;
+	  number = MB_STRLEN (t);
+	  FREE (t);
+	}
+#if defined (ARRAY_VARS)
+      else if ((var = find_variable (name + 1)) && (invisible_p (var) == 0) && (array_p (var) || assoc_p (var)))
+	{
+	  if (assoc_p (var))
+	    t = assoc_reference (assoc_cell (var), "0");
+	  else
+	    t = array_reference (array_cell (var), 0);
+	  if (t == 0 && unbound_vars_is_error)
+	    return INTMAX_MIN;
+	  number = MB_STRLEN (t);
+	}
+#endif
+      /* Fast path for the common case of taking the length of a non-dynamic
+	 scalar variable value. */
+      else if ((var || (var = find_variable (name + 1))) &&
+      		invisible_p (var) == 0 &&
+		array_p (var) == 0 && assoc_p (var) == 0 &&
+		var->dynamic_value == 0)
+	number = value_cell (var) ? MB_STRLEN (value_cell (var)) : 0;
+      else if (var == 0 && unbound_vars_is_error == 0)
+	number = 0;
+      else				/* ${#PS1} */
+	{
+	  newname = savestring (name);
+	  newname[0] = '$';
+	  list = expand_string (newname, Q_DOUBLE_QUOTES);
+	  t = list ? string_list (list) : (char *)NULL;
+	  free (newname);
+	  if (list)
+	    dispose_words (list);
+
+	  number = t ? MB_STRLEN (t) : 0;
+	  FREE (t);
+	}
+    }
+
+  return (number);
+}
+
+/* Skip characters in SUBSTR until DELIM.  SUBSTR is an arithmetic expression,
+   so we do some ad-hoc parsing of an arithmetic expression to find
+   the first DELIM, instead of using strchr(3).  Two rules:
+	1.  If the substring contains a `(', read until closing `)'.
+	2.  If the substring contains a `?', read past one `:' for each `?'.
+   The SD_ARITHEXP flag to skip_to_delim takes care of doing this.
+*/
+
+static char *
+skiparith (substr, delim)
+     char *substr;
+     int delim;
+{
+  int i;
+  char delims[2];
+
+  delims[0] = delim;
+  delims[1] = '\0';
+
+  i = skip_to_delim (substr, 0, delims, SD_ARITHEXP);
+  return (substr + i);
+}
+
+/* Verify and limit the start and end of the desired substring.  If
+   VTYPE == 0, a regular shell variable is being used; if it is 1,
+   then the positional parameters are being used; if it is 2, then
+   VALUE is really a pointer to an array variable that should be used.
+   Return value is 1 if both values were OK, 0 if there was a problem
+   with an invalid expression, or -1 if the values were out of range. */
+static int
+verify_substring_values (v, value, substr, vtype, e1p, e2p)
+     SHELL_VAR *v;
+     char *value, *substr;
+     int vtype;
+     intmax_t *e1p, *e2p;
+{
+  char *t, *temp1, *temp2;
+  arrayind_t len;
+  int expok;
+#if defined (ARRAY_VARS)
+ ARRAY *a;
+ HASH_TABLE *h;
+#endif
+
+  /* duplicate behavior of strchr(3) */
+  t = skiparith (substr, ':');
+  if (*t && *t == ':')
+    *t = '\0';
+  else
+    t = (char *)0;
+
+  temp1 = expand_arith_string (substr, Q_DOUBLE_QUOTES);
+  *e1p = evalexp (temp1, 0, &expok);		/* XXX - EXP_EXPANDED? */
+  free (temp1);
+  if (expok == 0)
+    return (0);
+
+  len = -1;	/* paranoia */
+  switch (vtype)
+    {
+    case VT_VARIABLE:
+    case VT_ARRAYMEMBER:
+      len = MB_STRLEN (value);
+      break;
+    case VT_POSPARMS:
+      len = number_of_args () + 1;
+      if (*e1p == 0)
+	len++;		/* add one arg if counting from $0 */
+      break;
+#if defined (ARRAY_VARS)
+    case VT_ARRAYVAR:
+      /* For arrays, the first value deals with array indices.  Negative
+	 offsets count from one past the array's maximum index.  Associative
+	 arrays treat the number of elements as the maximum index. */
+      if (assoc_p (v))
+	{
+	  h = assoc_cell (v);
+	  len = assoc_num_elements (h) + (*e1p < 0);
+	}
+      else
+	{
+	  a = (ARRAY *)value;
+	  len = array_max_index (a) + (*e1p < 0);	/* arrays index from 0 to n - 1 */
+	}
+      break;
+#endif
+    }
+
+  if (len == -1)	/* paranoia */
+    return -1;
+
+  if (*e1p < 0)		/* negative offsets count from end */
+    *e1p += len;
+
+  if (*e1p > len || *e1p < 0)
+    return (-1);
+
+#if defined (ARRAY_VARS)
+  /* For arrays, the second offset deals with the number of elements. */
+  if (vtype == VT_ARRAYVAR)
+    len = assoc_p (v) ? assoc_num_elements (h) : array_num_elements (a);
+#endif
+
+  if (t)
+    {
+      t++;
+      temp2 = savestring (t);
+      temp1 = expand_arith_string (temp2, Q_DOUBLE_QUOTES);
+      free (temp2);
+      t[-1] = ':';
+      *e2p = evalexp (temp1, 0, &expok);	/* XXX - EXP_EXPANDED? */
+      free (temp1);
+      if (expok == 0)
+	return (0);
+
+      /* Should we allow positional parameter length < 0 to count backwards
+	 from end of positional parameters? */
+#if 1
+      if ((vtype == VT_ARRAYVAR || vtype == VT_POSPARMS) && *e2p < 0)
+#else /* TAG: bash-5.2 */
+      if (vtype == VT_ARRAYVAR && *e2p < 0)
+#endif
+	{
+	  internal_error (_("%s: substring expression < 0"), t);
+	  return (0);
+	}
+#if defined (ARRAY_VARS)
+      /* In order to deal with sparse arrays, push the intelligence about how
+	 to deal with the number of elements desired down to the array-
+	 specific functions.  */
+      if (vtype != VT_ARRAYVAR)
+#endif
+	{
+	  if (*e2p < 0)
+	    {
+	      *e2p += len;
+	      if (*e2p < 0 || *e2p < *e1p)
+		{
+		  internal_error (_("%s: substring expression < 0"), t);
+		  return (0);
+		}
+	    }
+	  else
+	    *e2p += *e1p;		/* want E2 chars starting at E1 */
+	  if (*e2p > len)
+	    *e2p = len;
+	}
+    }
+  else
+    *e2p = len;
+
+  return (1);
+}
+
+/* Return the type of variable specified by VARNAME (simple variable,
+   positional param, or array variable).  Also return the value specified
+   by VARNAME (value of a variable or a reference to an array element).
+   QUOTED is the standard description of quoting state, using Q_* defines.
+   FLAGS is currently a set of flags to pass to array_value.  If IND is
+   non-null and not INTMAX_MIN, and FLAGS includes AV_USEIND, IND is
+   passed to array_value so the array index is not computed again.
+   If this returns VT_VARIABLE, the caller assumes that CTLESC and CTLNUL
+   characters in the value are quoted with CTLESC and takes appropriate
+   steps.  For convenience, *VALP is set to the dequoted VALUE. */
+static int
+get_var_and_type (varname, value, ind, quoted, flags, varp, valp)
+     char *varname, *value;
+     arrayind_t ind;
+     int quoted, flags;
+     SHELL_VAR **varp;
+     char **valp;
+{
+  int vtype, want_indir;
+  char *temp, *vname;
+  SHELL_VAR *v;
+  arrayind_t lind;
+
+  want_indir = *varname == '!' &&
+    (legal_variable_starter ((unsigned char)varname[1]) || DIGIT (varname[1])
+					|| VALID_INDIR_PARAM (varname[1]));
+  if (want_indir)
+    vname = parameter_brace_find_indir (varname+1, SPECIAL_VAR (varname, 1), quoted, 1);
+    /* XXX - what if vname == 0 || *vname == 0 ? */
+  else
+    vname = varname;
+
+  if (vname == 0)
+    {
+      vtype = VT_VARIABLE;
+      *varp = (SHELL_VAR *)NULL;
+      *valp = (char *)NULL;
+      return (vtype);
+    }
+
+  /* This sets vtype to VT_VARIABLE or VT_POSPARMS */
+  vtype = STR_DOLLAR_AT_STAR (vname);
+  if (vtype == VT_POSPARMS && vname[0] == '*')
+    vtype |= VT_STARSUB;
+  *varp = (SHELL_VAR *)NULL;
+
+#if defined (ARRAY_VARS)
+  if (valid_array_reference (vname, 0))
+    {
+      v = array_variable_part (vname, 0, &temp, (int *)0);
+      /* If we want to signal array_value to use an already-computed index,
+	 set LIND to that index */
+      lind = (ind != INTMAX_MIN && (flags & AV_USEIND)) ? ind : 0;
+      if (v && invisible_p (v))
+	{
+	  vtype = VT_ARRAYMEMBER;
+	  *varp = (SHELL_VAR *)NULL;
+	  *valp = (char *)NULL;
+	}
+      if (v && (array_p (v) || assoc_p (v)))
+	{
+	  if (ALL_ELEMENT_SUB (temp[0]) && temp[1] == RBRACK)
+	    {
+	      /* Callers have to differentiate between indexed and associative */
+	      vtype = VT_ARRAYVAR;
+	      if (temp[0] == '*')
+		vtype |= VT_STARSUB;
+	      *valp = array_p (v) ? (char *)array_cell (v) : (char *)assoc_cell (v);
+	    }
+	  else
+	    {
+	      vtype = VT_ARRAYMEMBER;
+	      *valp = array_value (vname, Q_DOUBLE_QUOTES, flags, (int *)NULL, &lind);
+	    }
+	  *varp = v;
+	}
+      else if (v && (ALL_ELEMENT_SUB (temp[0]) && temp[1] == RBRACK))
+	{
+	  vtype = VT_VARIABLE;
+	  *varp = v;
+	  if (quoted & (Q_DOUBLE_QUOTES|Q_HERE_DOCUMENT))
+	    *valp = value ? dequote_string (value) : (char *)NULL;
+	  else
+	    *valp = value ? dequote_escapes (value) : (char *)NULL;
+	}
+      else
+	{
+	  vtype = VT_ARRAYMEMBER;
+	  *varp = v;
+	  *valp = array_value (vname, Q_DOUBLE_QUOTES, flags, (int *)NULL, &lind);
+	}
+    }
+  else if ((v = find_variable (vname)) && (invisible_p (v) == 0) && (assoc_p (v) || array_p (v)))
+    {
+      vtype = VT_ARRAYMEMBER;
+      *varp = v;
+      *valp = assoc_p (v) ? assoc_reference (assoc_cell (v), "0") : array_reference (array_cell (v), 0);
+    }
+  else
+#endif
+    {
+      if (value && vtype == VT_VARIABLE)
+	{
+	  *varp = find_variable (vname);
+	  if (quoted & (Q_DOUBLE_QUOTES|Q_HERE_DOCUMENT))
+	    *valp = dequote_string (value);
+	  else
+	    *valp = dequote_escapes (value);
+	}
+      else
+	*valp = value;
+    }
+
+  if (want_indir)
+    free (vname);
+
+  return vtype;
+}
+
+/***********************************************************/
+/*						           */
+/* Functions to perform transformations on variable values */
+/*						           */
+/***********************************************************/
+
+static char *
+string_var_assignment (v, s)
+     SHELL_VAR *v;
+     char *s;
+{
+  char flags[MAX_ATTRIBUTES], *ret, *val;
+  int i;
+
+  val = (v && (invisible_p (v) || var_isset (v) == 0)) ? (char *)NULL : sh_quote_reusable (s, 0);
+  i = var_attribute_string (v, 0, flags);
+  if (i == 0 && val == 0)
+    return (char *)NULL;
+
+  ret = (char *)xmalloc (i + STRLEN (val) + strlen (v->name) + 16 + MAX_ATTRIBUTES);
+  if (i > 0 && val == 0)
+    sprintf (ret, "declare -%s %s", flags, v->name);
+  else if (i > 0)
+    sprintf (ret, "declare -%s %s=%s", flags, v->name, val);
+  else
+    sprintf (ret, "%s=%s", v->name, val);
+  free (val);
+  return ret;
+}
+
+#if defined (ARRAY_VARS)
+static char *
+array_var_assignment (v, itype, quoted, atype)
+     SHELL_VAR *v;
+     int itype, quoted, atype;
+{
+  char *ret, *val, flags[MAX_ATTRIBUTES];
+  int i;
+
+  if (v == 0)
+    return (char *)NULL;
+  if (atype == 2)
+    val = array_p (v) ? array_to_kvpair (array_cell (v), 0)
+		      : assoc_to_kvpair (assoc_cell (v), 0);
+  else
+    val = array_p (v) ? array_to_assign (array_cell (v), 0)
+		      : assoc_to_assign (assoc_cell (v), 0);
+
+  if (val == 0 && (invisible_p (v) || var_isset (v) == 0))
+    ;	/* placeholder */
+  else if (val == 0)
+    {
+      val = (char *)xmalloc (3);
+      val[0] = LPAREN;
+      val[1] = RPAREN;
+      val[2] = 0;
+    }
+  else
+    {
+      ret = (quoted & (Q_DOUBLE_QUOTES|Q_HERE_DOCUMENT)) ? quote_string (val) : quote_escapes (val);
+      free (val);
+      val = ret;
+    }
+
+  if (atype == 2)
+    return val;
+
+  i = var_attribute_string (v, 0, flags);
+  ret = (char *)xmalloc (i + STRLEN (val) + strlen (v->name) + 16);
+  if (val)
+    sprintf (ret, "declare -%s %s=%s", flags, v->name, val);
+  else
+    sprintf (ret, "declare -%s %s", flags, v->name);
+  free (val);
+  return ret;
+}
+#endif
+
+static char *
+pos_params_assignment (list, itype, quoted)
+     WORD_LIST *list;
+     int itype;
+     int quoted;
+{
+  char *temp, *ret;
+
+  /* first, we transform the list to quote each word. */
+  temp = list_transform ('Q', (SHELL_VAR *)0, list, itype, quoted);
+  ret = (char *)xmalloc (strlen (temp) + 8);
+  strcpy (ret, "set -- ");
+  strcpy (ret + 7, temp);
+  free (temp);
+  return ret;
+}
+
+static char *
+string_transform (xc, v, s)
+     int xc;
+     SHELL_VAR *v;
+     char *s;
+{
+  char *ret, flags[MAX_ATTRIBUTES], *t;
+  int i;
+
+  if (((xc == 'A' || xc == 'a') && v == 0))
+    return (char *)NULL;
+  else if (xc != 'a' && xc != 'A' && s == 0)
+    return (char *)NULL;
+
+  switch (xc)
+    {
+      /* Transformations that interrogate the variable */
+      case 'a':
+	i = var_attribute_string (v, 0, flags);
+	ret = (i > 0) ? savestring (flags) : (char *)NULL;
+	break;
+      case 'A':
+	ret = string_var_assignment (v, s);
+	break;
+      case 'K':
+	ret = sh_quote_reusable (s, 0);
+	break;
+      /* Transformations that modify the variable's value */
+      case 'E':
+	t = ansiexpand (s, 0, strlen (s), (int *)0);
+	ret = dequote_escapes (t);
+	free (t);
+	break;
+      case 'P':
+	ret = decode_prompt_string (s);
+	break;
+      case 'Q':
+	ret = sh_quote_reusable (s, 0);
+	break;
+      case 'U':
+	ret = sh_modcase (s, 0, CASE_UPPER);
+	break;
+      case 'u':
+	ret = sh_modcase (s, 0, CASE_UPFIRST);	/* capitalize */
+ 	break;
+      case 'L':
+ 	ret = sh_modcase (s, 0, CASE_LOWER);
+ 	break;
+      default:
+	ret = (char *)NULL;
+	break;
+    }
+  return ret;
+}
+
+static char *
+list_transform (xc, v, list, itype, quoted)
+     int xc;
+     SHELL_VAR *v;
+     WORD_LIST *list;
+     int itype, quoted;
+{
+  WORD_LIST *new, *l;
+  WORD_DESC *w;
+  char *tword;
+  int qflags;
+
+  for (new = (WORD_LIST *)NULL, l = list; l; l = l->next)
+    {
+      tword = string_transform (xc, v, l->word->word);
+      w = alloc_word_desc ();
+      w->word = tword ? tword : savestring ("");	/* XXX */
+      new = make_word_list (w, new);
+    }
+  l = REVERSE_LIST (new, WORD_LIST *);
+
+  qflags = quoted;
+  /* If we are expanding in a context where word splitting will not be
+     performed, treat as quoted.  This changes how $* will be expanded. */
+  if (itype == '*' && expand_no_split_dollar_star && ifs_is_null)
+    qflags |= Q_DOUBLE_QUOTES;		/* Posix interp 888 */
+
+  tword = string_list_pos_params (itype, l, qflags, 0);
+  dispose_words (l);
+
+  return (tword);
+}
+
+static char *
+parameter_list_transform (xc, itype, quoted)
+     int xc;
+     int itype;
+     int quoted;
+{
+  char *ret;
+  WORD_LIST *list;
+
+  list = list_rest_of_args ();
+  if (list == 0)
+    return ((char *)NULL);
+  if (xc == 'A')
+    ret = pos_params_assignment (list, itype, quoted);
+  else
+    ret = list_transform (xc, (SHELL_VAR *)0, list, itype, quoted);
+  dispose_words (list);
+  return (ret);
+}
+
+#if defined (ARRAY_VARS)
+static char *
+array_transform (xc, var, starsub, quoted)
+     int xc;
+     SHELL_VAR *var;
+     int starsub;	/* so we can figure out how it's indexed */
+     int quoted;
+{
+  ARRAY *a;
+  HASH_TABLE *h;
+  int itype;
+  char *ret;
+  WORD_LIST *list;
+  SHELL_VAR *v;
+
+  v = var;	/* XXX - for now */
+
+  itype = starsub ? '*' : '@';
+
+  if (xc == 'A')
+    return (array_var_assignment (v, itype, quoted, 1));
+  else if (xc == 'K')
+    return (array_var_assignment (v, itype, quoted, 2));
+
+  /* special case for unset arrays and attributes */
+  if (xc == 'a' && (invisible_p (v) || var_isset (v) == 0))
+    {
+      char flags[MAX_ATTRIBUTES];
+      int i;
+
+      i = var_attribute_string (v, 0, flags);
+      return ((i > 0) ? savestring (flags) : (char *)NULL);
+    }
+
+  a = (v && array_p (v)) ? array_cell (v) : 0;
+  h = (v && assoc_p (v)) ? assoc_cell (v) : 0;
+
+  list = a ? array_to_word_list (a) : (h ? assoc_to_word_list (h) : 0);
+  if (list == 0)
+   return ((char *)NULL);
+  ret = list_transform (xc, v, list, itype, quoted);
+  dispose_words (list);
+
+  return ret;
+}
+#endif /* ARRAY_VARS */
+
+static int
+valid_parameter_transform (xform)
+     char *xform;
+{
+  if (xform[1])
+    return 0;
+
+  /* check for valid values of xform[0] */
+  switch (xform[0])
+    {
+    case 'a':		/* expand to a string with just attributes */
+    case 'A':		/* expand as an assignment statement with attributes */
+    case 'K':		/* expand assoc array to list of key/value pairs */
+    case 'E':		/* expand like $'...' */
+    case 'P':		/* expand like prompt string */
+    case 'Q':		/* quote reusably */
+    case 'U':		/* transform to uppercase */
+    case 'u':		/* tranform by capitalizing */
+    case 'L':		/* transform to lowercase */
+      return 1;
+    default:
+      return 0;
+    }
+}
+      
+static char *
+parameter_brace_transform (varname, value, ind, xform, rtype, quoted, pflags, flags)
+     char *varname, *value;
+     int ind;
+     char *xform;
+     int rtype, quoted, pflags, flags;
+{
+  int vtype, xc, starsub;
+  char *temp1, *val, *oname;
+  SHELL_VAR *v;
+
+  xc = xform[0];
+  if (value == 0 && xc != 'A' && xc != 'a')
+    return ((char *)NULL);
+
+  oname = this_command_name;
+  this_command_name = varname;
+
+  vtype = get_var_and_type (varname, value, ind, quoted, flags, &v, &val);
+  if (vtype == -1)
+    {
+      this_command_name = oname;
+      return ((char *)NULL);
+    }
+
+  if (valid_parameter_transform (xform) == 0)
+    {
+      this_command_name = oname;
+#if 0 /* TAG: bash-5.2 Martin Schulte <gnu@schrader-schulte.de> 10/2020 */
+      return (interactive_shell ? &expand_param_error : &expand_param_fatal);
+#else
+      return &expand_param_error;
+#endif
+    }
+
+  starsub = vtype & VT_STARSUB;
+  vtype &= ~VT_STARSUB;
+
+  /* If we are asked to display the attributes of an unset variable, V will
+     be NULL after the call to get_var_and_type. Double-check here. */
+  if ((xc == 'a' || xc == 'A') && vtype == VT_VARIABLE && varname && v == 0)
+    v = find_variable (varname);
+
+  temp1 = (char *)NULL;		/* shut up gcc */
+  switch (vtype)
+    {
+    case VT_VARIABLE:
+    case VT_ARRAYMEMBER:
+      temp1 = string_transform (xc, v, val);
+      if (vtype == VT_VARIABLE)
+	FREE (val);
+      if (temp1)
+	{
+	  val = (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES))
+			? quote_string (temp1)
+			: quote_escapes (temp1);
+	  free (temp1);
+	  temp1 = val;
+	}
+      break;
+#if defined (ARRAY_VARS)
+    case VT_ARRAYVAR:
+      temp1 = array_transform (xc, v, starsub, quoted);
+      if (temp1 && quoted == 0 && ifs_is_null)
+	{
+		/* Posix interp 888 */
+	}
+      else if (temp1 && ((quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) == 0))
+	{
+	  val = quote_escapes (temp1);
+	  free (temp1);
+	  temp1 = val;
+	}
+      break;
+#endif
+    case VT_POSPARMS:
+      temp1 = parameter_list_transform (xc, varname[0], quoted);
+      if (temp1 && quoted == 0 && ifs_is_null)
+	{
+		/* Posix interp 888 */
+	}
+      else if (temp1 && ((quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) == 0))
+	{
+	  val = quote_escapes (temp1);
+	  free (temp1);
+	  temp1 = val;
+	}
+      break;
+    }
+
+  this_command_name = oname;
+  return temp1;
+}
+
+/******************************************************/
+/*						      */
+/* Functions to extract substrings of variable values */
+/*						      */
+/******************************************************/
+
+#if defined (HANDLE_MULTIBYTE)
+/* Character-oriented rather than strictly byte-oriented substrings.  S and
+   E, rather being strict indices into STRING, indicate character (possibly
+   multibyte character) positions that require calculation.
+   Used by the ${param:offset[:length]} expansion. */
+static char *
+mb_substring (string, s, e)
+     char *string;
+     int s, e;
+{
+  char *tt;
+  int start, stop, i;
+  size_t slen;
+  DECLARE_MBSTATE;
+
+  start = 0;
+  /* Don't need string length in ADVANCE_CHAR unless multibyte chars possible. */
+  slen = (MB_CUR_MAX > 1) ? STRLEN (string) : 0;
+
+  i = s;
+  while (string[start] && i--)
+    ADVANCE_CHAR (string, slen, start);
+  stop = start;
+  i = e - s;
+  while (string[stop] && i--)
+    ADVANCE_CHAR (string, slen, stop);
+  tt = substring (string, start, stop);
+  return tt;
+}
+#endif
+  
+/* Process a variable substring expansion: ${name:e1[:e2]}.  If VARNAME
+   is `@', use the positional parameters; otherwise, use the value of
+   VARNAME.  If VARNAME is an array variable, use the array elements. */
+
+static char *
+parameter_brace_substring (varname, value, ind, substr, quoted, pflags, flags)
+     char *varname, *value;
+     int ind;
+     char *substr;
+     int quoted, pflags, flags;
+{
+  intmax_t e1, e2;
+  int vtype, r, starsub;
+  char *temp, *val, *tt, *oname;
+  SHELL_VAR *v;
+
+  if (value == 0 && ((varname[0] != '@' && varname[0] != '*') || varname[1]))
+    return ((char *)NULL);
+
+  oname = this_command_name;
+  this_command_name = varname;
+
+  vtype = get_var_and_type (varname, value, ind, quoted, flags, &v, &val);
+  if (vtype == -1)
+    {
+      this_command_name = oname;
+      return ((char *)NULL);
+    }
+
+  starsub = vtype & VT_STARSUB;
+  vtype &= ~VT_STARSUB;
+
+  r = verify_substring_values (v, val, substr, vtype, &e1, &e2);
+  this_command_name = oname;
+  if (r <= 0)
+    {
+      if (vtype == VT_VARIABLE)
+	FREE (val);
+      return ((r == 0) ? &expand_param_error : (char *)NULL);
+    }
+
+  switch (vtype)
+    {
+    case VT_VARIABLE:
+    case VT_ARRAYMEMBER:
+#if defined (HANDLE_MULTIBYTE)
+      if (MB_CUR_MAX > 1)
+	tt = mb_substring (val, e1, e2);
+      else
+#endif
+      tt = substring (val, e1, e2);
+
+      if (vtype == VT_VARIABLE)
+	FREE (val);
+      if (quoted & (Q_DOUBLE_QUOTES|Q_HERE_DOCUMENT))
+	temp = quote_string (tt);
+      else
+	temp = tt ? quote_escapes (tt) : (char *)NULL;
+      FREE (tt);
+      break;
+    case VT_POSPARMS:
+    case VT_ARRAYVAR:
+      if (vtype == VT_POSPARMS)
+	tt = pos_params (varname, e1, e2, quoted, pflags);
+#if defined (ARRAY_VARS)
+        /* assoc_subrange and array_subrange both call string_list_pos_params,
+	   so we can treat this case just like VT_POSPARAMS. */
+      else if (assoc_p (v))
+	/* we convert to list and take first e2 elements starting at e1th
+	   element -- officially undefined for now */	
+	tt = assoc_subrange (assoc_cell (v), e1, e2, starsub, quoted, pflags);
+      else
+	/* We want E2 to be the number of elements desired (arrays can be
+	   sparse, so verify_substring_values just returns the numbers
+	   specified and we rely on array_subrange to understand how to
+	   deal with them). */
+	tt = array_subrange (array_cell (v), e1, e2, starsub, quoted, pflags);
+#endif
+      /* We want to leave this alone in every case where pos_params/
+	 string_list_pos_params quotes the list members */
+      if (tt && quoted == 0 && ifs_is_null)
+	{
+	  temp = tt;	/* Posix interp 888 */
+	}
+      else if (tt && quoted == 0 && (pflags & PF_ASSIGNRHS))
+	{
+	  temp = tt;	/* Posix interp 888 */
+	}
+      else if ((quoted & (Q_DOUBLE_QUOTES|Q_HERE_DOCUMENT)) == 0)
+	{
+	  temp = tt ? quote_escapes (tt) : (char *)NULL;
+	  FREE (tt);
+	}
+      else
+	temp = tt;
+      break;
+
+    default:
+      temp = (char *)NULL;
+    }
+
+  return temp;
+}
+
+/****************************************************************/
+/*								*/
+/* Functions to perform pattern substitution on variable values */
+/*								*/
+/****************************************************************/
+
+#ifdef INCLUDE_UNUSED
+static int
+shouldexp_replacement (s)
+     char *s;
+{
+  register char *p;
+
+  for (p = s; p && *p; p++)
+    {
+      if (*p == '\\')
+	p++;
+      else if (*p == '&')
+	return 1;
+    }
+  return 0;
+}
+#endif
+
+char *
+pat_subst (string, pat, rep, mflags)
+     char *string, *pat, *rep;
+     int mflags;
+{
+  char *ret, *s, *e, *str, *rstr, *mstr, *send;
+  int rptr, mtype, rxpand, mlen;
+  size_t rsize, l, replen, rslen;
+  DECLARE_MBSTATE;
+
+  if (string == 0)
+    return (savestring (""));
+
+  mtype = mflags & MATCH_TYPEMASK;
+
+#if 0	/* TAG: bash-5.2? */
+  rxpand = (rep && *rep) ? shouldexp_replacement (rep) : 0;
+#else
+  rxpand = 0;
+#endif
+
+  /* Special cases:
+   * 	1.  A null pattern with mtype == MATCH_BEG means to prefix STRING
+   *	    with REP and return the result.
+   *	2.  A null pattern with mtype == MATCH_END means to append REP to
+   *	    STRING and return the result.
+   *	3.  A null STRING with a matching pattern means to append REP to
+   *	    STRING and return the result.
+   * These don't understand or process `&' in the replacement string.
+   */
+  if ((pat == 0 || *pat == 0) && (mtype == MATCH_BEG || mtype == MATCH_END))
+    {
+      replen = STRLEN (rep);
+      l = STRLEN (string);
+      ret = (char *)xmalloc (replen + l + 2);
+      if (replen == 0)
+	strcpy (ret, string);
+      else if (mtype == MATCH_BEG)
+	{
+	  strcpy (ret, rep);
+	  strcpy (ret + replen, string);
+	}
+      else
+	{
+	  strcpy (ret, string);
+	  strcpy (ret + l, rep);
+	}
+      return (ret);
+    }
+  else if (*string == 0 && (match_pattern (string, pat, mtype, &s, &e) != 0))
+    {
+      replen = STRLEN (rep);
+      ret = (char *)xmalloc (replen + 1);
+      if (replen == 0)
+	ret[0] = '\0';
+      else
+	strcpy (ret, rep);
+      return (ret);
+    }
+
+  ret = (char *)xmalloc (rsize = 64);
+  ret[0] = '\0';
+  send = string + strlen (string);
+
+  for (replen = STRLEN (rep), rptr = 0, str = string; *str;)
+    {
+      if (match_pattern (str, pat, mtype, &s, &e) == 0)
+	break;
+      l = s - str;
+
+      if (rep && rxpand)
+        {
+	  int x;
+	  mlen = e - s;
+	  mstr = xmalloc (mlen + 1);
+	  for (x = 0; x < mlen; x++)
+	    mstr[x] = s[x];
+	  mstr[mlen] = '\0';
+	  rstr = strcreplace (rep, '&', mstr, 0);
+	  free (mstr);
+	  rslen = strlen (rstr);
+        }
+      else
+	{
+	  rstr = rep;
+	  rslen = replen;
+	}
+        
+      RESIZE_MALLOCED_BUFFER (ret, rptr, (l + rslen), rsize, 64);
+
+      /* OK, now copy the leading unmatched portion of the string (from
+	 str to s) to ret starting at rptr (the current offset).  Then copy
+	 the replacement string at ret + rptr + (s - str).  Increment
+	 rptr (if necessary) and str and go on. */
+      if (l)
+	{
+	  strncpy (ret + rptr, str, l);
+	  rptr += l;
+	}
+      if (replen)
+	{
+	  strncpy (ret + rptr, rstr, rslen);
+	  rptr += rslen;
+	}
+      str = e;		/* e == end of match */
+
+      if (rstr != rep)
+	free (rstr);
+
+      if (((mflags & MATCH_GLOBREP) == 0) || mtype != MATCH_ANY)
+	break;
+
+      if (s == e)
+	{
+	  /* On a zero-length match, make sure we copy one character, since
+	     we increment one character to avoid infinite recursion. */
+	  char *p, *origp, *origs;
+	  size_t clen;
+
+	  RESIZE_MALLOCED_BUFFER (ret, rptr, locale_mb_cur_max, rsize, 64);
+#if defined (HANDLE_MULTIBYTE)
+	  p = origp = ret + rptr;
+	  origs = str;
+	  COPY_CHAR_P (p, str, send);
+	  rptr += p - origp;
+	  e += str - origs;
+#else
+	  ret[rptr++] = *str++;
+	  e++;		/* avoid infinite recursion on zero-length match */
+#endif
+	}
+    }
+
+  /* Now copy the unmatched portion of the input string */
+  if (str && *str)
+    {
+      RESIZE_MALLOCED_BUFFER (ret, rptr, STRLEN(str) + 1, rsize, 64);
+      strcpy (ret + rptr, str);
+    }
+  else
+    ret[rptr] = '\0';
+
+  return ret;
+}
+
+/* Do pattern match and replacement on the positional parameters. */
+static char *
+pos_params_pat_subst (string, pat, rep, mflags)
+     char *string, *pat, *rep;
+     int mflags;
+{
+  WORD_LIST *save, *params;
+  WORD_DESC *w;
+  char *ret;
+  int pchar, qflags, pflags;
+
+  save = params = list_rest_of_args ();
+  if (save == 0)
+    return ((char *)NULL);
+
+  for ( ; params; params = params->next)
+    {
+      ret = pat_subst (params->word->word, pat, rep, mflags);
+      w = alloc_word_desc ();
+      w->word = ret ? ret : savestring ("");
+      dispose_word (params->word);
+      params->word = w;
+    }
+
+  pchar = (mflags & MATCH_STARSUB) == MATCH_STARSUB ? '*' : '@';
+  qflags = (mflags & MATCH_QUOTED) == MATCH_QUOTED ? Q_DOUBLE_QUOTES : 0;
+  pflags = (mflags & MATCH_ASSIGNRHS) == MATCH_ASSIGNRHS ? PF_ASSIGNRHS : 0;
+
+  /* If we are expanding in a context where word splitting will not be
+     performed, treat as quoted. This changes how $* will be expanded. */
+  if (pchar == '*' && (mflags & MATCH_ASSIGNRHS) && expand_no_split_dollar_star && ifs_is_null)
+    qflags |= Q_DOUBLE_QUOTES;		/* Posix interp 888 */
+
+  ret = string_list_pos_params (pchar, save, qflags, pflags);
+  dispose_words (save);
+
+  return (ret);
+}
+
+/* Perform pattern substitution on VALUE, which is the expansion of
+   VARNAME.  PATSUB is an expression supplying the pattern to match
+   and the string to substitute.  QUOTED is a flags word containing
+   the type of quoting currently in effect. */
+static char *
+parameter_brace_patsub (varname, value, ind, patsub, quoted, pflags, flags)
+     char *varname, *value;
+     int ind;
+     char *patsub;
+     int quoted, pflags, flags;
+{
+  int vtype, mflags, starsub, delim;
+  char *val, *temp, *pat, *rep, *p, *lpatsub, *tt, *oname;
+  SHELL_VAR *v;
+
+  if (value == 0)
+    return ((char *)NULL);
+
+  oname = this_command_name;
+  this_command_name = varname;		/* error messages */
+
+  vtype = get_var_and_type (varname, value, ind, quoted, flags, &v, &val);
+  if (vtype == -1)
+    {
+      this_command_name = oname;
+      return ((char *)NULL);
+    }
+
+  starsub = vtype & VT_STARSUB;
+  vtype &= ~VT_STARSUB;
+
+  mflags = 0;
+  /* PATSUB is never NULL when this is called. */
+  if (*patsub == '/')
+    {
+      mflags |= MATCH_GLOBREP;
+      patsub++;
+    }
+
+  /* Malloc this because expand_string_if_necessary or one of the expansion
+     functions in its call chain may free it on a substitution error. */
+  lpatsub = savestring (patsub);
+
+  if (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES))
+    mflags |= MATCH_QUOTED;
+
+  if (starsub)
+    mflags |= MATCH_STARSUB;
+
+  if (pflags & PF_ASSIGNRHS)
+    mflags |= MATCH_ASSIGNRHS;
+
+  /* If the pattern starts with a `/', make sure we skip over it when looking
+     for the replacement delimiter. */
+  delim = skip_to_delim (lpatsub, ((*patsub == '/') ? 1 : 0), "/", 0);
+  if (lpatsub[delim] == '/')
+    {
+      lpatsub[delim] = 0;
+      rep = lpatsub + delim + 1;
+    }
+  else
+    rep = (char *)NULL;
+
+  if (rep && *rep == '\0')
+    rep = (char *)NULL;
+
+  /* Perform the same expansions on the pattern as performed by the
+     pattern removal expansions. */
+  pat = getpattern (lpatsub, quoted, 1);
+
+  if (rep)
+    {
+      /* We want to perform quote removal on the expanded replacement even if
+	 the entire expansion is double-quoted because the parser and string
+	 extraction functions treated quotes in the replacement string as
+	 special.  THIS IS NOT BACKWARDS COMPATIBLE WITH BASH-4.2. */
+      if (shell_compatibility_level > 42)
+	rep = expand_string_if_necessary (rep, quoted & ~(Q_DOUBLE_QUOTES|Q_HERE_DOCUMENT), expand_string_unsplit);
+      /* This is the bash-4.2 code. */      
+      else if ((mflags & MATCH_QUOTED) == 0)
+	rep = expand_string_if_necessary (rep, quoted, expand_string_unsplit);
+      else
+	rep = expand_string_to_string_internal (rep, quoted, expand_string_unsplit);
+    }
+
+  /* ksh93 doesn't allow the match specifier to be a part of the expanded
+     pattern.  This is an extension.  Make sure we don't anchor the pattern
+     at the beginning or end of the string if we're doing global replacement,
+     though. */
+  p = pat;
+  if (mflags & MATCH_GLOBREP)
+    mflags |= MATCH_ANY;
+  else if (pat && pat[0] == '#')
+    {
+      mflags |= MATCH_BEG;
+      p++;
+    }
+  else if (pat && pat[0] == '%')
+    {
+      mflags |= MATCH_END;
+      p++;
+    }
+  else
+    mflags |= MATCH_ANY;
+
+  /* OK, we now want to substitute REP for PAT in VAL.  If
+     flags & MATCH_GLOBREP is non-zero, the substitution is done
+     everywhere, otherwise only the first occurrence of PAT is
+     replaced.  The pattern matching code doesn't understand
+     CTLESC quoting CTLESC and CTLNUL so we use the dequoted variable
+     values passed in (VT_VARIABLE) so the pattern substitution
+     code works right.  We need to requote special chars after
+     we're done for VT_VARIABLE and VT_ARRAYMEMBER, and for the
+     other cases if QUOTED == 0, since the posparams and arrays
+     indexed by * or @ do special things when QUOTED != 0. */
+
+  switch (vtype)
+    {
+    case VT_VARIABLE:
+    case VT_ARRAYMEMBER:
+      temp = pat_subst (val, p, rep, mflags);
+      if (vtype == VT_VARIABLE)
+	FREE (val);
+      if (temp)
+	{
+	  tt = (mflags & MATCH_QUOTED) ? quote_string (temp) : quote_escapes (temp);
+	  free (temp);
+	  temp = tt;
+	}
+      break;
+    case VT_POSPARMS:
+      /* This does the right thing for the case where we are not performing
+	 word splitting. MATCH_STARSUB restricts it to ${* /foo/bar}, and
+	 pos_params_pat_subst/string_list_pos_params will do the right thing
+	 in turn for the case where ifs_is_null. Posix interp 888 */
+      if ((pflags & PF_NOSPLIT2) && (mflags & MATCH_STARSUB))
+        mflags |= MATCH_ASSIGNRHS;
+      temp = pos_params_pat_subst (val, p, rep, mflags);
+      if (temp && quoted == 0 && ifs_is_null)
+	{
+	  /* Posix interp 888 */
+	}
+      else if (temp && quoted == 0 && (pflags & PF_ASSIGNRHS))
+	{
+	  /* Posix interp 888 */
+	}
+      else if (temp && (mflags & MATCH_QUOTED) == 0)
+	{
+	  tt = quote_escapes (temp);
+	  free (temp);
+	  temp = tt;
+	}
+      break;
+#if defined (ARRAY_VARS)
+    case VT_ARRAYVAR:
+      /* If we are expanding in a context where word splitting will not be
+	 performed, treat as quoted.  This changes how ${A[*]} will be
+	 expanded to make it identical to $*. */
+      if ((mflags & MATCH_STARSUB) && (mflags & MATCH_ASSIGNRHS) && ifs_is_null)
+	mflags |= MATCH_QUOTED;		/* Posix interp 888 */
+
+      /* these eventually call string_list_pos_params */
+      if (assoc_p (v))
+	temp = assoc_patsub (assoc_cell (v), p, rep, mflags);
+      else
+	temp = array_patsub (array_cell (v), p, rep, mflags);
+
+      if (temp && quoted == 0 && ifs_is_null)
+	{
+	  /* Posix interp 888 */
+	}
+      else if (temp && (mflags & MATCH_QUOTED) == 0)
+	{
+	  tt = quote_escapes (temp);
+	  free (temp);
+	  temp = tt;
+	}
+      break;
+#endif
+    }
+
+  FREE (pat);
+  FREE (rep);
+  free (lpatsub);
+
+  this_command_name = oname;
+
+  return temp;
+}
+
+/****************************************************************/
+/*								*/
+/*   Functions to perform case modification on variable values  */
+/*								*/
+/****************************************************************/
+
+/* Do case modification on the positional parameters. */
+
+static char *
+pos_params_modcase (string, pat, modop, mflags)
+     char *string, *pat;
+     int modop;
+     int mflags;
+{
+  WORD_LIST *save, *params;
+  WORD_DESC *w;
+  char *ret;
+  int pchar, qflags, pflags;
+
+  save = params = list_rest_of_args ();
+  if (save == 0)
+    return ((char *)NULL);
+
+  for ( ; params; params = params->next)
+    {
+      ret = sh_modcase (params->word->word, pat, modop);
+      w = alloc_word_desc ();
+      w->word = ret ? ret : savestring ("");
+      dispose_word (params->word);
+      params->word = w;
+    }
+
+  pchar = (mflags & MATCH_STARSUB) == MATCH_STARSUB ? '*' : '@';
+  qflags = (mflags & MATCH_QUOTED) == MATCH_QUOTED ? Q_DOUBLE_QUOTES : 0;
+  pflags = (mflags & MATCH_ASSIGNRHS) == MATCH_ASSIGNRHS ? PF_ASSIGNRHS : 0;
+
+  /* If we are expanding in a context where word splitting will not be
+     performed, treat as quoted.  This changes how $* will be expanded. */
+  if (pchar == '*' && (mflags & MATCH_ASSIGNRHS) && ifs_is_null)
+    qflags |= Q_DOUBLE_QUOTES;		/* Posix interp 888 */
+
+  ret = string_list_pos_params (pchar, save, qflags, pflags);
+  dispose_words (save);
+
+  return (ret);
+}
+
+/* Perform case modification on VALUE, which is the expansion of
+   VARNAME.  MODSPEC is an expression supplying the type of modification
+   to perform.  QUOTED is a flags word containing the type of quoting
+   currently in effect. */
+static char *
+parameter_brace_casemod (varname, value, ind, modspec, patspec, quoted, pflags, flags)
+     char *varname, *value;
+     int ind, modspec;
+     char *patspec;
+     int quoted, pflags, flags;
+{
+  int vtype, starsub, modop, mflags, x;
+  char *val, *temp, *pat, *p, *lpat, *tt, *oname;
+  SHELL_VAR *v;
+
+  if (value == 0)
+    return ((char *)NULL);
+
+  oname = this_command_name;
+  this_command_name = varname;
+
+  vtype = get_var_and_type (varname, value, ind, quoted, flags, &v, &val);
+  if (vtype == -1)
+    {
+      this_command_name = oname;
+      return ((char *)NULL);
+    }
+
+  starsub = vtype & VT_STARSUB;
+  vtype &= ~VT_STARSUB;
+
+  modop = 0;
+  mflags = 0;
+  if (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES))
+    mflags |= MATCH_QUOTED;
+  if (starsub)
+    mflags |= MATCH_STARSUB;
+  if (pflags & PF_ASSIGNRHS)
+    mflags |= MATCH_ASSIGNRHS;
+  
+  p = patspec;
+  if (modspec == '^')
+    {
+      x = p && p[0] == modspec;
+      modop = x ? CASE_UPPER : CASE_UPFIRST;
+      p += x;
+    }
+  else if (modspec == ',')
+    {
+      x = p && p[0] == modspec;
+      modop = x ? CASE_LOWER : CASE_LOWFIRST;
+      p += x;
+    }
+  else if (modspec == '~')
+    {
+      x = p && p[0] == modspec;
+      modop = x ? CASE_TOGGLEALL : CASE_TOGGLE;
+      p += x;
+    }
+    
+  lpat = p ? savestring (p) : 0;
+  /* Perform the same expansions on the pattern as performed by the
+     pattern removal expansions. */
+  pat = lpat ? getpattern (lpat, quoted, 1) : 0;
+
+  /* OK, now we do the case modification. */
+  switch (vtype)
+    {
+    case VT_VARIABLE:
+    case VT_ARRAYMEMBER:
+      temp = sh_modcase (val, pat, modop);
+      if (vtype == VT_VARIABLE)
+	FREE (val);
+      if (temp)
+	{
+	  tt = (mflags & MATCH_QUOTED) ? quote_string (temp) : quote_escapes (temp);
+	  free (temp);
+	  temp = tt;
+	}
+      break;
+
+    case VT_POSPARMS:
+      temp = pos_params_modcase (val, pat, modop, mflags);
+      if (temp && quoted == 0 && ifs_is_null)
+	{
+	  /* Posix interp 888 */
+	}
+      else if (temp && (mflags & MATCH_QUOTED) == 0)
+	{
+	  tt = quote_escapes (temp);
+	  free (temp);
+	  temp = tt;
+	}
+      break;
+
+#if defined (ARRAY_VARS)
+    case VT_ARRAYVAR:
+      /* If we are expanding in a context where word splitting will not be
+	 performed, treat as quoted.  This changes how ${A[*]} will be
+	 expanded to make it identical to $*. */
+      if ((mflags & MATCH_STARSUB) && (mflags & MATCH_ASSIGNRHS) && ifs_is_null)
+	mflags |= MATCH_QUOTED;		/* Posix interp 888 */
+
+      temp = assoc_p (v) ? assoc_modcase (assoc_cell (v), pat, modop, mflags)
+			 : array_modcase (array_cell (v), pat, modop, mflags);
+
+      if (temp && quoted == 0 && ifs_is_null)
+	{
+	  /* Posix interp 888 */
+	}
+      else if (temp && (mflags & MATCH_QUOTED) == 0)
+	{
+	  tt = quote_escapes (temp);
+	  free (temp);
+	  temp = tt;
+	}
+
+      break;
+#endif
+    }
+
+  FREE (pat);
+  free (lpat);
+
+  this_command_name = oname;
+
+  return temp;
+}
+
+/* Check for unbalanced parens in S, which is the contents of $(( ... )).  If
+   any occur, this must be a nested command substitution, so return 0.
+   Otherwise, return 1.  A valid arithmetic expression must always have a
+   ( before a matching ), so any cases where there are more right parens
+   means that this must not be an arithmetic expression, though the parser
+   will not accept it without a balanced total number of parens. */
+static int
+chk_arithsub (s, len)
+     const char *s;
+     int len;
+{
+  int i, count;
+  DECLARE_MBSTATE;
+
+  i = count = 0;
+  while (i < len)
+    {
+      if (s[i] == LPAREN)
+	count++;
+      else if (s[i] == RPAREN)
+	{
+	  count--;
+	  if (count < 0)
+	    return 0;
+	}
+
+      switch (s[i])
+	{
+	default:
+	  ADVANCE_CHAR (s, len, i);
+	  break;
+
+	case '\\':
+	  i++;
+	  if (s[i])
+	    ADVANCE_CHAR (s, len, i);
+	  break;
+
+	case '\'':
+	  i = skip_single_quoted (s, len, ++i, 0);
+	  break;
+
+	case '"':
+	  i = skip_double_quoted ((char *)s, len, ++i, 0);
+	  break;
+	}
+    }
+
+  return (count == 0);
+}
+
+/****************************************************************/
+/*								*/
+/*	Functions to perform parameter expansion on a string	*/
+/*								*/
+/****************************************************************/
+
+/* ${[#][!]name[[:][^[^]][,[,]]#[#]%[%]-=?+[word][:e1[:e2]]]} */
+static WORD_DESC *
+parameter_brace_expand (string, indexp, quoted, pflags, quoted_dollar_atp, contains_dollar_at)
+     char *string;
+     int *indexp, quoted, pflags, *quoted_dollar_atp, *contains_dollar_at;
+{
+  int check_nullness, var_is_set, var_is_null, var_is_special;
+  int want_substring, want_indir, want_patsub, want_casemod, want_attributes;
+  char *name, *value, *temp, *temp1;
+  WORD_DESC *tdesc, *ret;
+  int t_index, sindex, c, tflag, modspec, local_pflags, all_element_arrayref;
+  intmax_t number;
+  arrayind_t ind;
+
+  temp = temp1 = value = (char *)NULL;
+  var_is_set = var_is_null = var_is_special = check_nullness = 0;
+  want_substring = want_indir = want_patsub = want_casemod = want_attributes = 0;
+
+  local_pflags = 0;
+  all_element_arrayref = 0;
+
+  sindex = *indexp;
+  t_index = ++sindex;
+  /* ${#var} doesn't have any of the other parameter expansions on it. */
+  if (string[t_index] == '#' && legal_variable_starter (string[t_index+1]))		/* {{ */
+    name = string_extract (string, &t_index, "}", SX_VARNAME);
+  else
+#if defined (CASEMOD_EXPANSIONS)
+    /* To enable case-toggling expansions using the `~' operator character
+       define CASEMOD_TOGGLECASE in config-top.h */
+#  if defined (CASEMOD_TOGGLECASE)
+    name = string_extract (string, &t_index, "#%^,~:-=?+/@}", SX_VARNAME);
+#  else
+    name = string_extract (string, &t_index, "#%^,:-=?+/@}", SX_VARNAME);
+#  endif /* CASEMOD_TOGGLECASE */
+#else
+    name = string_extract (string, &t_index, "#%:-=?+/@}", SX_VARNAME);
+#endif /* CASEMOD_EXPANSIONS */
+
+  /* Handle ${@[stuff]} now that @ is a word expansion operator.  Not exactly
+     the cleanest code ever. */
+  if (*name == 0 && sindex == t_index && string[sindex] == '@')
+    {
+      name = (char *)xrealloc (name, 2);
+      name[0] = '@';
+      name[1] = '\0';
+      t_index++;
+    }
+  else if (*name == '!' && t_index > sindex && string[t_index] == '@' && string[t_index+1] == RBRACE)
+    {
+      name = (char *)xrealloc (name, t_index - sindex + 2);
+      name[t_index - sindex] = '@';
+      name[t_index - sindex + 1] = '\0';
+      t_index++;
+    }
+
+  ret = 0;
+  tflag = 0;
+
+  ind = INTMAX_MIN;
+
+  /* If the name really consists of a special variable, then make sure
+     that we have the entire name.  We don't allow indirect references
+     to special variables except `#', `?', `@' and `*'.  This clause is
+     designed to handle ${#SPECIAL} and ${!SPECIAL}, not anything more
+     general. */
+  if ((sindex == t_index && VALID_SPECIAL_LENGTH_PARAM (string[t_index])) ||
+      (sindex == t_index && string[sindex] == '#' && VALID_SPECIAL_LENGTH_PARAM (string[sindex + 1])) ||
+      (sindex == t_index - 1 && string[sindex] == '!' && VALID_INDIR_PARAM (string[t_index])))
+    {
+      t_index++;
+      temp1 = string_extract (string, &t_index, "#%:-=?+/@}", 0);
+      name = (char *)xrealloc (name, 3 + (strlen (temp1)));
+      *name = string[sindex];
+      if (string[sindex] == '!')
+	{
+	  /* indirect reference of $#, $?, $@, or $* */
+	  name[1] = string[sindex + 1];
+	  strcpy (name + 2, temp1);
+	}
+      else	
+	strcpy (name + 1, temp1);
+      free (temp1);
+    }
+  sindex = t_index;
+
+  /* Find out what character ended the variable name.  Then
+     do the appropriate thing. */
+  if (c = string[sindex])
+    sindex++;
+
+  /* If c is followed by one of the valid parameter expansion
+     characters, move past it as normal.  If not, assume that
+     a substring specification is being given, and do not move
+     past it. */
+  if (c == ':' && VALID_PARAM_EXPAND_CHAR (string[sindex]))
+    {
+      check_nullness++;
+      if (c = string[sindex])
+	sindex++;
+    }
+  else if (c == ':' && string[sindex] != RBRACE)
+    want_substring = 1;
+  else if (c == '/' /* && string[sindex] != RBRACE */)	/* XXX */
+    want_patsub = 1;
+#if defined (CASEMOD_EXPANSIONS)
+  else if (c == '^' || c == ',' || c == '~')
+    {
+      modspec = c;
+      want_casemod = 1;
+    }
+#endif
+  else if (c == '@' && (string[sindex] == 'a' || string[sindex] == 'A') && string[sindex+1] == RBRACE)
+    {
+      /* special case because we do not want to shortcut foo as foo[0] here */
+      want_attributes = 1;
+      local_pflags |= PF_ALLINDS;
+    }
+
+  /* Catch the valid and invalid brace expressions that made it through the
+     tests above. */
+  /* ${#-} is a valid expansion and means to take the length of $-.
+     Similarly for ${#?} and ${##}... */
+  if (name[0] == '#' && name[1] == '\0' && check_nullness == 0 &&
+	VALID_SPECIAL_LENGTH_PARAM (c) && string[sindex] == RBRACE)
+    {
+      name = (char *)xrealloc (name, 3);
+      name[1] = c;
+      name[2] = '\0';
+      c = string[sindex++];
+    }
+
+  /* ...but ${#%}, ${#:}, ${#=}, ${#+}, and ${#/} are errors. */
+  if (name[0] == '#' && name[1] == '\0' && check_nullness == 0 &&
+	member (c, "%:=+/") && string[sindex] == RBRACE)
+    {
+      temp = (char *)NULL;
+      goto bad_substitution;	/* XXX - substitution error */
+    }
+
+  /* Indirect expansion begins with a `!'.  A valid indirect expansion is
+     either a variable name, one of the positional parameters or a special
+     variable that expands to one of the positional parameters. */
+  want_indir = *name == '!' &&
+    (legal_variable_starter ((unsigned char)name[1]) || DIGIT (name[1])
+					|| VALID_INDIR_PARAM (name[1]));
+
+  /* Determine the value of this variable whose name is NAME. */
+
+  /* Check for special variables, directly referenced. */
+  if (SPECIAL_VAR (name, want_indir))
+    var_is_special++;
+
+  /* Check for special expansion things, like the length of a parameter */
+  if (*name == '#' && name[1])
+    {
+      /* If we are not pointing at the character just after the
+	 closing brace, then we haven't gotten all of the name.
+	 Since it begins with a special character, this is a bad
+	 substitution.  Also check NAME for validity before trying
+	 to go on. */
+      if (string[sindex - 1] != RBRACE || (valid_length_expression (name) == 0))
+	{
+	  temp = (char *)NULL;
+	  goto bad_substitution;	/* substitution error */
+	}
+
+      number = parameter_brace_expand_length (name);
+      if (number == INTMAX_MIN && unbound_vars_is_error)
+	{
+	  set_exit_status (EXECUTION_FAILURE);
+	  err_unboundvar (name+1);
+	  free (name);
+	  return (interactive_shell ? &expand_wdesc_error : &expand_wdesc_fatal);
+	}
+      free (name);
+
+      *indexp = sindex;
+      if (number < 0)
+        return (&expand_wdesc_error);
+      else
+	{
+	  ret = alloc_word_desc ();
+	  ret->word = itos (number);
+	  return ret;
+	}
+    }
+
+  /* ${@} is identical to $@. */
+  if (name[0] == '@' && name[1] == '\0')
+    {
+      if ((quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) && quoted_dollar_atp)
+	*quoted_dollar_atp = 1;
+
+      if (contains_dollar_at)
+	*contains_dollar_at = 1;
+
+      tflag |= W_DOLLARAT;
+    }
+
+  /* Process ${!PREFIX*} expansion. */
+  if (want_indir && string[sindex - 1] == RBRACE &&
+      (string[sindex - 2] == '*' || string[sindex - 2] == '@') &&
+      legal_variable_starter ((unsigned char) name[1]))
+    {
+      char **x;
+      WORD_LIST *xlist;
+
+      temp1 = savestring (name + 1);
+      number = strlen (temp1);
+      temp1[number - 1] = '\0';
+      x = all_variables_matching_prefix (temp1);
+      xlist = strvec_to_word_list (x, 0, 0);
+      if (string[sindex - 2] == '*')
+	temp = string_list_dollar_star (xlist, quoted, 0);
+      else
+	{
+	  temp = string_list_dollar_at (xlist, quoted, 0);
+	  if ((quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) && quoted_dollar_atp)
+	    *quoted_dollar_atp = 1;
+	  if (contains_dollar_at)
+	    *contains_dollar_at = 1;
+
+	  tflag |= W_DOLLARAT;
+	}
+      free (x);
+      dispose_words (xlist);
+      free (temp1);
+      *indexp = sindex;
+
+      free (name);
+
+      ret = alloc_word_desc ();
+      ret->word = temp;
+      ret->flags = tflag;	/* XXX */
+      return ret;
+    }
+
+#if defined (ARRAY_VARS)      
+  /* Process ${!ARRAY[@]} and ${!ARRAY[*]} expansion. */
+  if (want_indir && string[sindex - 1] == RBRACE &&
+      string[sindex - 2] == RBRACK && valid_array_reference (name+1, 0))
+    {
+      char *x, *x1;
+
+      temp1 = savestring (name + 1);
+      x = array_variable_name (temp1, 0, &x1, (int *)0);
+      FREE (x);
+      if (ALL_ELEMENT_SUB (x1[0]) && x1[1] == RBRACK)
+	{
+	  temp = array_keys (temp1, quoted, pflags);	/* handles assoc vars too */
+	  if (x1[0] == '@')
+	    {
+	      if ((quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) && quoted_dollar_atp)
+		*quoted_dollar_atp = 1;
+	      if (contains_dollar_at)
+		*contains_dollar_at = 1;
+
+	      tflag |= W_DOLLARAT;
+	    }	    
+
+	  free (name);
+	  free (temp1);
+	  *indexp = sindex;
+
+	  ret = alloc_word_desc ();
+	  ret->word = temp;
+	  ret->flags = tflag;	/* XXX */
+	  return ret;
+	}
+
+      free (temp1);
+    }
+#endif /* ARRAY_VARS */
+      
+  /* Make sure that NAME is valid before trying to go on. */
+  if (valid_brace_expansion_word (want_indir ? name + 1 : name,
+					var_is_special) == 0)
+    {
+      temp = (char *)NULL;
+      goto bad_substitution;		/* substitution error */
+    }
+
+  if (want_indir)
+    {
+      tdesc = parameter_brace_expand_indir (name + 1, var_is_special, quoted, pflags|local_pflags, quoted_dollar_atp, contains_dollar_at);
+      if (tdesc == &expand_wdesc_error || tdesc == &expand_wdesc_fatal)
+	{
+	  temp = (char *)NULL;
+	  goto bad_substitution;
+	}
+
+      /* Turn off the W_ARRAYIND flag because there is no way for this function
+	 to return the index we're supposed to be using. */
+      if (tdesc && tdesc->flags)
+	tdesc->flags &= ~W_ARRAYIND;
+    }
+  else
+    {
+      local_pflags |= PF_IGNUNBOUND|(pflags&(PF_NOSPLIT2|PF_ASSIGNRHS));
+      tdesc = parameter_brace_expand_word (name, var_is_special, quoted, local_pflags, &ind);
+    }
+
+  if (tdesc == &expand_wdesc_error || tdesc == &expand_wdesc_fatal)
+    {
+      tflag = 0;
+      tdesc = 0;
+    }
+
+  if (tdesc)
+    {
+      temp = tdesc->word;
+      tflag = tdesc->flags;
+      dispose_word_desc (tdesc);
+    }
+  else
+    temp = (char  *)0;
+
+  if (temp == &expand_param_error || temp == &expand_param_fatal)
+    {
+      FREE (name);
+      FREE (value);
+      return (temp == &expand_param_error ? &expand_wdesc_error : &expand_wdesc_fatal);
+    }
+
+#if defined (ARRAY_VARS)
+  if (valid_array_reference (name, 0))
+    {
+      int qflags;
+      char *t;
+
+      qflags = quoted;
+      /* If in a context where word splitting will not take place, treat as
+	 if double-quoted.  Has effects with $* and ${array[*]} */
+
+      if (pflags & PF_ASSIGNRHS)
+	qflags |= Q_DOUBLE_QUOTES;
+      /* We duplicate a little code here */
+      t = mbschr (name, LBRACK);
+      if (t && ALL_ELEMENT_SUB (t[1]) && t[2] == RBRACK)
+	{
+	  all_element_arrayref = 1;
+	  if (expand_no_split_dollar_star && t[1] == '*')	/* XXX */
+	    qflags |= Q_DOUBLE_QUOTES;
+	}
+      chk_atstar (name, qflags, pflags, quoted_dollar_atp, contains_dollar_at);
+    }
+#endif
+
+  var_is_set = temp != (char *)0;
+  var_is_null = check_nullness && (var_is_set == 0 || *temp == 0);
+  /* XXX - this may not need to be restricted to special variables */
+  if (check_nullness)
+    var_is_null |= var_is_set && var_is_special && (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) && QUOTED_NULL (temp);
+#if defined (ARRAY_VARS)
+  if (check_nullness)
+    var_is_null |= var_is_set && 
+		   (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) &&
+		   QUOTED_NULL (temp) &&
+		   valid_array_reference (name, 0) &&
+		   chk_atstar (name, 0, 0, (int *)0, (int *)0);
+#endif
+
+  /* Get the rest of the stuff inside the braces. */
+  if (c && c != RBRACE)
+    {
+      /* Extract the contents of the ${ ... } expansion
+	 according to the Posix.2 rules. */
+      value = extract_dollar_brace_string (string, &sindex, quoted, (c == '%' || c == '#' || c =='/' || c == '^' || c == ',' || c ==':') ? SX_POSIXEXP|SX_WORD : SX_WORD);
+      if (string[sindex] == RBRACE)
+	sindex++;
+      else
+	goto bad_substitution;		/* substitution error */
+    }
+  else
+    value = (char *)NULL;
+
+  *indexp = sindex;
+
+  /* All the cases where an expansion can possibly generate an unbound
+     variable error. */
+  if (want_substring || want_patsub || want_casemod || c == '@' || c == '#' || c == '%' || c == RBRACE)
+    {
+      if (var_is_set == 0 && unbound_vars_is_error && ((name[0] != '@' && name[0] != '*') || name[1]) && all_element_arrayref == 0)
+	{
+	  set_exit_status (EXECUTION_FAILURE);
+	  err_unboundvar (name);
+	  FREE (value);
+	  FREE (temp);
+	  free (name);
+	  return (interactive_shell ? &expand_wdesc_error : &expand_wdesc_fatal);
+	}
+    }
+    
+  /* If this is a substring spec, process it and add the result. */
+  if (want_substring)
+    {
+      temp1 = parameter_brace_substring (name, temp, ind, value, quoted, pflags, (tflag & W_ARRAYIND) ? AV_USEIND : 0);
+      FREE (value);
+      FREE (temp);
+
+      if (temp1 == &expand_param_error || temp1 == &expand_param_fatal)
+        {
+          FREE (name);
+	  return (temp1 == &expand_param_error ? &expand_wdesc_error : &expand_wdesc_fatal);
+        }
+
+      ret = alloc_word_desc ();
+      ret->word = temp1;
+      /* We test quoted_dollar_atp because we want variants with double-quoted
+	 "$@" to take a different code path. In fact, we make sure at the end
+	 of expand_word_internal that we're only looking at these flags if
+	 quoted_dollar_at == 0. */
+      if (temp1 &&
+          (quoted_dollar_atp == 0 || *quoted_dollar_atp == 0) &&
+	  QUOTED_NULL (temp1) && (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)))
+	ret->flags |= W_QUOTED|W_HASQUOTEDNULL;
+      else if (temp1 && (name[0] == '*' && name[1] == 0) && quoted == 0 &&
+		(pflags & PF_ASSIGNRHS))
+	ret->flags |= W_SPLITSPACE;	/* Posix interp 888 */	
+      /* Special handling for $* when unquoted and $IFS is null. Posix interp 888 */
+      else if (temp1 && (name[0] == '*' && name[1] == 0) && quoted == 0 && ifs_is_null)
+	ret->flags |= W_SPLITSPACE;	/* Posix interp 888 */
+
+      FREE (name);
+      return ret;
+    }
+  else if (want_patsub)
+    {
+      temp1 = parameter_brace_patsub (name, temp, ind, value, quoted, pflags, (tflag & W_ARRAYIND) ? AV_USEIND : 0);
+      FREE (value);
+      FREE (temp);
+
+      if (temp1 == &expand_param_error || temp1 == &expand_param_fatal)
+        {
+          FREE (name);
+	  return (temp1 == &expand_param_error ? &expand_wdesc_error : &expand_wdesc_fatal);
+        }
+
+      ret = alloc_word_desc ();
+      ret->word = temp1;
+      if (temp1 && 
+          (quoted_dollar_atp == 0 || *quoted_dollar_atp == 0) &&
+	  QUOTED_NULL (temp1) && (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)))
+	ret->flags |= W_QUOTED|W_HASQUOTEDNULL;
+      /* Special handling for $* when unquoted and $IFS is null. Posix interp 888 */
+      else if (temp1 && (name[0] == '*' && name[1] == 0) && quoted == 0 && ifs_is_null)
+	ret->flags |= W_SPLITSPACE;	/* Posix interp 888 */
+
+      FREE (name);
+      return ret;
+    }
+#if defined (CASEMOD_EXPANSIONS)
+  else if (want_casemod)
+    {
+      temp1 = parameter_brace_casemod (name, temp, ind, modspec, value, quoted, pflags, (tflag & W_ARRAYIND) ? AV_USEIND : 0);
+      FREE (value);
+      FREE (temp);
+
+      if (temp1 == &expand_param_error || temp1 == &expand_param_fatal)
+        {
+          FREE (name);
+	  return (temp1 == &expand_param_error ? &expand_wdesc_error : &expand_wdesc_fatal);
+        }
+
+      ret = alloc_word_desc ();
+      ret->word = temp1;
+      if (temp1 &&
+          (quoted_dollar_atp == 0 || *quoted_dollar_atp == 0) &&
+	  QUOTED_NULL (temp1) && (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)))
+	ret->flags |= W_QUOTED|W_HASQUOTEDNULL;
+      /* Special handling for $* when unquoted and $IFS is null. Posix interp 888 */
+      else if (temp1 && (name[0] == '*' && name[1] == 0) && quoted == 0 && ifs_is_null)
+	ret->flags |= W_SPLITSPACE;	/* Posix interp 888 */
+
+      FREE (name);
+      return ret;
+    }
+#endif
+
+  /* Do the right thing based on which character ended the variable name. */
+  switch (c)
+    {
+    default:
+    case '\0':
+bad_substitution:
+      set_exit_status (EXECUTION_FAILURE);
+      report_error (_("%s: bad substitution"), string ? string : "??");
+      FREE (value);
+      FREE (temp);
+      free (name);
+      if (shell_compatibility_level <= 43)
+	return &expand_wdesc_error;
+      else
+	return ((posixly_correct && interactive_shell == 0) ? &expand_wdesc_fatal : &expand_wdesc_error);
+
+    case RBRACE:
+      break;
+
+    case '@':
+      temp1 = parameter_brace_transform (name, temp, ind, value, c, quoted, pflags, (tflag & W_ARRAYIND) ? AV_USEIND : 0);
+      free (temp);
+      free (value);
+
+      if (temp1 == &expand_param_error || temp1 == &expand_param_fatal)
+	{
+	  free (name);
+	  set_exit_status (EXECUTION_FAILURE);
+	  report_error (_("%s: bad substitution"), string ? string : "??");
+	  return (temp1 == &expand_param_error ? &expand_wdesc_error : &expand_wdesc_fatal);
+	}
+
+      ret = alloc_word_desc ();
+      ret->word = temp1;
+      if (temp1 && QUOTED_NULL (temp1) && (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)))
+	ret->flags |= W_QUOTED|W_HASQUOTEDNULL;
+      /* Special handling for $* when unquoted and $IFS is null. Posix interp 888 */
+      else if (temp1 && (name[0] == '*' && name[1] == 0) && quoted == 0 && ifs_is_null)
+	ret->flags |= W_SPLITSPACE;	/* Posix interp 888 */
+
+      free (name);
+      return ret;
+
+    case '#':	/* ${param#[#]pattern} */
+    case '%':	/* ${param%[%]pattern} */
+      if (value == 0 || *value == '\0' || temp == 0 || *temp == '\0')
+	{
+	  FREE (value);
+	  break;
+	}
+      temp1 = parameter_brace_remove_pattern (name, temp, ind, value, c, quoted, (tflag & W_ARRAYIND) ? AV_USEIND : 0);
+      free (temp);
+      free (value);
+
+      ret = alloc_word_desc ();
+      ret->word = temp1;
+      if (temp1 && QUOTED_NULL (temp1) && (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)))
+	ret->flags |= W_QUOTED|W_HASQUOTEDNULL;
+      /* Special handling for $* when unquoted and $IFS is null. Posix interp 888 */
+      else if (temp1 && (name[0] == '*' && name[1] == 0) && quoted == 0 && ifs_is_null)
+	ret->flags |= W_SPLITSPACE;	/* Posix interp 888 */
+
+      free (name);
+      return ret;
+
+    case '-':
+    case '=':
+    case '?':
+    case '+':
+      if (var_is_set && var_is_null == 0)
+	{
+	  /* If the operator is `+', we don't want the value of the named
+	     variable for anything, just the value of the right hand side. */
+	  if (c == '+')
+	    {
+	      /* XXX -- if we're double-quoted and the named variable is "$@",
+			we want to turn off any special handling of "$@" --
+			we're not using it, so whatever is on the rhs applies. */
+	      if ((quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) && quoted_dollar_atp)
+		*quoted_dollar_atp = 0;
+	      if (contains_dollar_at)
+		*contains_dollar_at = 0;
+
+	      FREE (temp);
+	      if (value)
+		{
+		  /* From Posix discussion on austin-group list.  Issue 221
+		     requires that backslashes escaping `}' inside
+		     double-quoted ${...} be removed. */
+		  if (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES))
+		    quoted |= Q_DOLBRACE;
+		  ret = parameter_brace_expand_rhs (name, value, c,
+						    quoted,
+						    pflags,
+						    quoted_dollar_atp,
+						    contains_dollar_at);
+		  /* XXX - fix up later, esp. noting presence of
+			   W_HASQUOTEDNULL in ret->flags */
+		  free (value);
+		}
+	      else
+		temp = (char *)NULL;
+	    }
+	  else
+	    {
+	      FREE (value);
+	    }
+	  /* Otherwise do nothing; just use the value in TEMP. */
+	}
+      else	/* VAR not set or VAR is NULL. */
+	{
+	  FREE (temp);
+	  temp = (char *)NULL;
+	  if (c == '=' && var_is_special)
+	    {
+	      set_exit_status (EXECUTION_FAILURE);
+	      report_error (_("$%s: cannot assign in this way"), name);
+	      free (name);
+	      free (value);
+	      return &expand_wdesc_error;
+	    }
+	  else if (c == '?')
+	    {
+	      parameter_brace_expand_error (name, value, check_nullness);
+	      return (interactive_shell ? &expand_wdesc_error : &expand_wdesc_fatal);
+	    }
+	  else if (c != '+')
+	    {
+	      /* XXX -- if we're double-quoted and the named variable is "$@",
+			we want to turn off any special handling of "$@" --
+			we're not using it, so whatever is on the rhs applies. */
+	      if ((quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) && quoted_dollar_atp)
+		*quoted_dollar_atp = 0;
+	      if (contains_dollar_at)
+		*contains_dollar_at = 0;
+
+	      /* From Posix discussion on austin-group list.  Issue 221 requires
+		 that backslashes escaping `}' inside double-quoted ${...} be
+		 removed. */
+	      if (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES))
+		quoted |= Q_DOLBRACE;
+	      ret = parameter_brace_expand_rhs (name, value, c, quoted, pflags,
+						quoted_dollar_atp,
+						contains_dollar_at);
+	      /* XXX - fix up later, esp. noting presence of
+		       W_HASQUOTEDNULL in tdesc->flags */
+	    }
+	  free (value);
+	}
+
+      break;
+    }
+  free (name);
+
+  if (ret == 0)
+    {
+      ret = alloc_word_desc ();
+      ret->flags = tflag;
+      ret->word = temp;
+    }
+  return (ret);
+}
+
+/* Expand a single ${xxx} expansion.  The braces are optional.  When
+   the braces are used, parameter_brace_expand() does the work,
+   possibly calling param_expand recursively. */
+static WORD_DESC *
+param_expand (string, sindex, quoted, expanded_something,
+	      contains_dollar_at, quoted_dollar_at_p, had_quoted_null_p,
+	      pflags)
+     char *string;
+     int *sindex, quoted, *expanded_something, *contains_dollar_at;
+     int *quoted_dollar_at_p, *had_quoted_null_p, pflags;
+{
+  char *temp, *temp1, uerror[3], *savecmd;
+  int zindex, t_index, expok;
+  unsigned char c;
+  intmax_t number;
+  SHELL_VAR *var;
+  WORD_LIST *list, *l;
+  WORD_DESC *tdesc, *ret;
+  int tflag, nullarg;
+
+/*itrace("param_expand: `%s' pflags = %d", string+*sindex, pflags);*/
+  zindex = *sindex;
+  c = string[++zindex];
+
+  temp = (char *)NULL;
+  ret = tdesc = (WORD_DESC *)NULL;
+  tflag = 0;
+
+  /* Do simple cases first. Switch on what follows '$'. */
+  switch (c)
+    {
+    /* $0 .. $9? */
+    case '0':
+    case '1':
+    case '2':
+    case '3':
+    case '4':
+    case '5':
+    case '6':
+    case '7':
+    case '8':
+    case '9':
+      temp1 = dollar_vars[TODIGIT (c)];
+      /* This doesn't get called when (pflags&PF_IGNUNBOUND) != 0 */
+      if (unbound_vars_is_error && temp1 == (char *)NULL)
+	{
+	  uerror[0] = '$';
+	  uerror[1] = c;
+	  uerror[2] = '\0';
+	  set_exit_status (EXECUTION_FAILURE);
+	  err_unboundvar (uerror);
+	  return (interactive_shell ? &expand_wdesc_error : &expand_wdesc_fatal);
+	}
+      if (temp1)
+	temp = (*temp1 && (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)))
+		  ? quote_string (temp1)
+		  : quote_escapes (temp1);
+      else
+	temp = (char *)NULL;
+
+      break;
+
+    /* $$ -- pid of the invoking shell. */
+    case '$':
+      temp = itos (dollar_dollar_pid);
+      break;
+
+    /* $# -- number of positional parameters. */
+    case '#':
+      temp = itos (number_of_args ());
+      break;
+
+    /* $? -- return value of the last synchronous command. */
+    case '?':
+      temp = itos (last_command_exit_value);
+      break;
+
+    /* $- -- flags supplied to the shell on invocation or by `set'. */
+    case '-':
+      temp = which_set_flags ();
+      break;
+
+      /* $! -- Pid of the last asynchronous command. */
+    case '!':
+      /* If no asynchronous pids have been created, expand to nothing.
+	 If `set -u' has been executed, and no async processes have
+	 been created, this is an expansion error. */
+      if (last_asynchronous_pid == NO_PID)
+	{
+	  if (expanded_something)
+	    *expanded_something = 0;
+	  temp = (char *)NULL;
+	  if (unbound_vars_is_error && (pflags & PF_IGNUNBOUND) == 0)
+	    {
+	      uerror[0] = '$';
+	      uerror[1] = c;
+	      uerror[2] = '\0';
+	      set_exit_status (EXECUTION_FAILURE);
+	      err_unboundvar (uerror);
+	      return (interactive_shell ? &expand_wdesc_error : &expand_wdesc_fatal);
+	    }
+	}
+      else
+	temp = itos (last_asynchronous_pid);
+      break;
+
+    /* The only difference between this and $@ is when the arg is quoted. */
+    case '*':		/* `$*' */
+      list = list_rest_of_args ();
+
+#if 0
+      /* According to austin-group posix proposal by Geoff Clare in
+	 <20090505091501.GA10097@squonk.masqnet> of 5 May 2009:
+
+ 	"The shell shall write a message to standard error and
+ 	 immediately exit when it tries to expand an unset parameter
+ 	 other than the '@' and '*' special parameters."
+      */
+
+      if (list == 0 && unbound_vars_is_error && (pflags & PF_IGNUNBOUND) == 0)
+	{
+	  uerror[0] = '$';
+	  uerror[1] = '*';
+	  uerror[2] = '\0';
+	  set_exit_status (EXECUTION_FAILURE);
+	  err_unboundvar (uerror);
+	  return (interactive_shell ? &expand_wdesc_error : &expand_wdesc_fatal);
+	}
+#endif
+
+      /* If there are no command-line arguments, this should just
+	 disappear if there are other characters in the expansion,
+	 even if it's quoted. */
+      if ((quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) && list == 0)
+	temp = (char *)NULL;
+      else if (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES|Q_PATQUOTE))
+	{
+	  /* If we have "$*" we want to make a string of the positional
+	     parameters, separated by the first character of $IFS, and
+	     quote the whole string, including the separators.  If IFS
+	     is unset, the parameters are separated by ' '; if $IFS is
+	     null, the parameters are concatenated. */
+	  temp = (quoted & (Q_DOUBLE_QUOTES|Q_PATQUOTE)) ? string_list_dollar_star (list, quoted, 0) : string_list (list);
+	  if (temp)
+	    {
+	      temp1 = (quoted & Q_DOUBLE_QUOTES) ? quote_string (temp) : temp;
+	      if (*temp == 0)
+		tflag |= W_HASQUOTEDNULL;
+	      if (temp != temp1)
+		free (temp);
+	      temp = temp1;
+	    }
+	}
+      else
+	{
+	  /* We check whether or not we're eventually going to split $* here,
+	     for example when IFS is empty and we are processing the rhs of
+	     an assignment statement.  In that case, we don't separate the
+	     arguments at all.  Otherwise, if the $* is not quoted it is
+	     identical to $@ */
+	  if (expand_no_split_dollar_star && quoted == 0 && ifs_is_set == 0 && (pflags & PF_ASSIGNRHS))
+	    {
+	      /* Posix interp 888: RHS of assignment, IFS unset: no splitting,
+		 separate with space */
+	      temp1 = string_list_dollar_star (list, quoted, pflags);
+	      temp = temp1 ? quote_string (temp1) : temp1;
+	      /* XXX - tentative - note that we saw a quoted null here */
+	      if (temp1 && *temp1 == 0 && QUOTED_NULL (temp))
+		tflag |= W_SAWQUOTEDNULL;
+	      FREE (temp1);
+	    }
+	  else if (expand_no_split_dollar_star && quoted == 0 && ifs_is_null && (pflags & PF_ASSIGNRHS))
+	    {
+	      /* Posix interp 888: RHS of assignment, IFS set to '' */
+	      temp1 = string_list_dollar_star (list, quoted, pflags);
+	      temp = temp1 ? quote_escapes (temp1) : temp1;
+	      FREE (temp1);
+	    }
+	  else if (expand_no_split_dollar_star && quoted == 0 && ifs_is_set && ifs_is_null == 0 && (pflags & PF_ASSIGNRHS))
+	    {
+	      /* Posix interp 888: RHS of assignment, IFS set to non-null value */
+	      temp1 = string_list_dollar_star (list, quoted, pflags);
+	      temp = temp1 ? quote_string (temp1) : temp1;
+
+	      /* XXX - tentative - note that we saw a quoted null here */
+	      if (temp1 && *temp1 == 0 && QUOTED_NULL (temp))
+		tflag |= W_SAWQUOTEDNULL;
+	      FREE (temp1);
+	    }
+	  /* XXX - should we check ifs_is_set here as well? */
+#  if defined (HANDLE_MULTIBYTE)
+	  else if (expand_no_split_dollar_star && ifs_firstc[0] == 0)
+#  else
+	  else if (expand_no_split_dollar_star && ifs_firstc == 0)
+#  endif
+	    /* Posix interp 888: not RHS, no splitting, IFS set to '' */
+	    temp = string_list_dollar_star (list, quoted, 0);
+	  else
+	    {
+	      temp = string_list_dollar_at (list, quoted, 0);
+	      /* Set W_SPLITSPACE to make sure the individual positional
+		 parameters are split into separate arguments */
+#if 0
+	      if (quoted == 0 && (ifs_is_set == 0 || ifs_is_null))
+#else	/* change with bash-5.0 */
+	      if (quoted == 0 && ifs_is_null)
+#endif
+		tflag |= W_SPLITSPACE;
+	      /* If we're not quoted but we still don't want word splitting, make
+		 we quote the IFS characters to protect them from splitting (e.g.,
+		 when $@ is in the string as well). */
+	      else if (temp && quoted == 0 && ifs_is_set && (pflags & PF_ASSIGNRHS))
+		{
+		  temp1 = quote_string (temp);
+		  free (temp);
+		  temp = temp1;
+		}
+	    }
+
+	  if (expand_no_split_dollar_star == 0 && contains_dollar_at)
+	    *contains_dollar_at = 1;
+	}
+
+      dispose_words (list);
+      break;
+
+    /* When we have "$@" what we want is "$1" "$2" "$3" ... This
+       means that we have to turn quoting off after we split into
+       the individually quoted arguments so that the final split
+       on the first character of $IFS is still done.  */
+    case '@':		/* `$@' */
+      list = list_rest_of_args ();
+
+#if 0
+      /* According to austin-group posix proposal by Geoff Clare in
+	 <20090505091501.GA10097@squonk.masqnet> of 5 May 2009:
+
+ 	"The shell shall write a message to standard error and
+ 	 immediately exit when it tries to expand an unset parameter
+ 	 other than the '@' and '*' special parameters."
+      */
+
+      if (list == 0 && unbound_vars_is_error && (pflags & PF_IGNUNBOUND) == 0)
+	{
+	  uerror[0] = '$';
+	  uerror[1] = '@';
+	  uerror[2] = '\0';
+	  set_exit_status (EXECUTION_FAILURE);
+	  err_unboundvar (uerror);
+	  return (interactive_shell ? &expand_wdesc_error : &expand_wdesc_fatal);
+	}
+#endif
+
+      for (nullarg = 0, l = list; l; l = l->next)
+	{
+	  if (l->word && (l->word->word == 0 || l->word->word[0] == 0))
+	    nullarg = 1;
+	}
+
+      /* We want to flag the fact that we saw this.  We can't turn
+	 off quoting entirely, because other characters in the
+	 string might need it (consider "\"$@\""), but we need some
+	 way to signal that the final split on the first character
+	 of $IFS should be done, even though QUOTED is 1. */
+      /* XXX - should this test include Q_PATQUOTE? */
+      if (quoted_dollar_at_p && (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)))
+	*quoted_dollar_at_p = 1;
+      if (contains_dollar_at)
+	*contains_dollar_at = 1;
+
+      /* We want to separate the positional parameters with the first
+	 character of $IFS in case $IFS is something other than a space.
+	 We also want to make sure that splitting is done no matter what --
+	 according to POSIX.2, this expands to a list of the positional
+	 parameters no matter what IFS is set to. */
+      /* XXX - what to do when in a context where word splitting is not
+	 performed? Even when IFS is not the default, posix seems to imply
+	 that we have to expand $@ to all the positional parameters and
+	 separate them with spaces, which are preserved because word splitting
+	 doesn't take place.  See below for how we use PF_NOSPLIT2 here. */
+
+      /* These are the cases where word splitting will not be performed. */
+      if (pflags & PF_ASSIGNRHS)
+	{
+	  temp = string_list_dollar_at (list, (quoted|Q_DOUBLE_QUOTES), pflags);
+	  if (nullarg)
+	    tflag |= W_HASQUOTEDNULL;	/* we know quoting produces quoted nulls */
+	}
+
+      /* This needs to match what expand_word_internal does with non-quoted $@
+	 does with separating with spaces.  Passing Q_DOUBLE_QUOTES means that
+	 the characters in LIST will be quoted, and PF_ASSIGNRHS ensures that
+	 they will separated by spaces. After doing this, we need the special
+	 handling for PF_NOSPLIT2 in expand_word_internal to remove the CTLESC
+	 quotes. */
+      else if (pflags & PF_NOSPLIT2)
+        {
+#if defined (HANDLE_MULTIBYTE)
+	  if (quoted == 0 && ifs_is_set && ifs_is_null == 0 && ifs_firstc[0] != ' ')
+#else
+	  if (quoted == 0 && ifs_is_set && ifs_is_null == 0 && ifs_firstc != ' ')
+#endif
+	    /* Posix interp 888 */
+	    temp = string_list_dollar_at (list, Q_DOUBLE_QUOTES, pflags);
+	  else
+	    temp = string_list_dollar_at (list, quoted, pflags);
+	}
+      else
+	temp = string_list_dollar_at (list, quoted, pflags);
+
+      tflag |= W_DOLLARAT;
+      dispose_words (list);
+      break;
+
+    case LBRACE:
+      tdesc = parameter_brace_expand (string, &zindex, quoted, pflags,
+				      quoted_dollar_at_p,
+				      contains_dollar_at);
+
+      if (tdesc == &expand_wdesc_error || tdesc == &expand_wdesc_fatal)
+	return (tdesc);
+      temp = tdesc ? tdesc->word : (char *)0;
+
+      /* XXX */
+      /* Quoted nulls should be removed if there is anything else
+	 in the string. */
+      /* Note that we saw the quoted null so we can add one back at
+	 the end of this function if there are no other characters
+	 in the string, discard TEMP, and go on.  The exception to
+	 this is when we have "${@}" and $1 is '', since $@ needs
+	 special handling. */
+      if (tdesc && tdesc->word && (tdesc->flags & W_HASQUOTEDNULL) && QUOTED_NULL (temp))
+	{
+	  if (had_quoted_null_p)
+	    *had_quoted_null_p = 1;
+	  if (*quoted_dollar_at_p == 0)
+	    {
+	      free (temp);
+	      tdesc->word = temp = (char *)NULL;
+	    }
+	    
+	}
+
+      ret = tdesc;
+      goto return0;
+
+    /* Do command or arithmetic substitution. */
+    case LPAREN:
+      /* We have to extract the contents of this paren substitution. */
+      t_index = zindex + 1;
+      /* XXX - might want to check for string[t_index+2] == LPAREN and parse
+	 as arithmetic substitution immediately. */
+      temp = extract_command_subst (string, &t_index, (pflags&PF_COMPLETE) ? SX_COMPLETE : 0);
+      zindex = t_index;
+
+      /* For Posix.2-style `$(( ))' arithmetic substitution,
+	 extract the expression and pass it to the evaluator. */
+      if (temp && *temp == LPAREN)
+	{
+	  char *temp2;
+	  temp1 = temp + 1;
+	  temp2 = savestring (temp1);
+	  t_index = strlen (temp2) - 1;
+
+	  if (temp2[t_index] != RPAREN)
+	    {
+	      free (temp2);
+	      goto comsub;
+	    }
+
+	  /* Cut off ending `)' */
+	  temp2[t_index] = '\0';
+
+	  if (chk_arithsub (temp2, t_index) == 0)
+	    {
+	      free (temp2);
+#if 0
+	      internal_warning (_("future versions of the shell will force evaluation as an arithmetic substitution"));
+#endif
+	      goto comsub;
+	    }
+
+	  /* Expand variables found inside the expression. */
+	  temp1 = expand_arith_string (temp2, Q_DOUBLE_QUOTES|Q_ARITH);
+	  free (temp2);
+
+arithsub:
+	  /* No error messages. */
+	  savecmd = this_command_name;
+	  this_command_name = (char *)NULL;
+	  number = evalexp (temp1, EXP_EXPANDED, &expok);
+	  this_command_name = savecmd;
+	  free (temp);
+	  free (temp1);
+	  if (expok == 0)
+	    {
+	      if (interactive_shell == 0 && posixly_correct)
+		{
+		  set_exit_status (EXECUTION_FAILURE);
+		  return (&expand_wdesc_fatal);
+		}
+	      else
+		return (&expand_wdesc_error);
+	    }
+	  temp = itos (number);
+	  break;
+	}
+
+comsub:
+      if (pflags & PF_NOCOMSUB)
+	/* we need zindex+1 because string[zindex] == RPAREN */
+	temp1 = substring (string, *sindex, zindex+1);
+      else
+	{
+	  tdesc = command_substitute (temp, quoted, pflags&PF_ASSIGNRHS);
+	  temp1 = tdesc ? tdesc->word : (char *)NULL;
+	  if (tdesc)
+	    dispose_word_desc (tdesc);
+	}
+      FREE (temp);
+      temp = temp1;
+      break;
+
+    /* Do POSIX.2d9-style arithmetic substitution.  This will probably go
+       away in a future bash release. */
+    case '[':		/*]*/
+      /* Extract the contents of this arithmetic substitution. */
+      t_index = zindex + 1;
+      temp = extract_arithmetic_subst (string, &t_index);
+      zindex = t_index;
+      if (temp == 0)
+	{
+	  temp = savestring (string);
+	  if (expanded_something)
+	    *expanded_something = 0;
+	  goto return0;
+	}	  
+
+       /* Do initial variable expansion. */
+      temp1 = expand_arith_string (temp, Q_DOUBLE_QUOTES|Q_ARITH);
+
+      goto arithsub;
+
+    default:
+      /* Find the variable in VARIABLE_LIST. */
+      temp = (char *)NULL;
+
+      for (t_index = zindex; (c = string[zindex]) && legal_variable_char (c); zindex++)
+	;
+      temp1 = (zindex > t_index) ? substring (string, t_index, zindex) : (char *)NULL;
+
+      /* If this isn't a variable name, then just output the `$'. */
+      if (temp1 == 0 || *temp1 == '\0')
+	{
+	  FREE (temp1);
+	  temp = (char *)xmalloc (2);
+	  temp[0] = '$';
+	  temp[1] = '\0';
+	  if (expanded_something)
+	    *expanded_something = 0;
+	  goto return0;
+	}
+
+      /* If the variable exists, return its value cell. */
+      var = find_variable (temp1);
+
+      if (var && invisible_p (var) == 0 && var_isset (var))
+	{
+#if defined (ARRAY_VARS)
+	  if (assoc_p (var) || array_p (var))
+	    {
+	      temp = array_p (var) ? array_reference (array_cell (var), 0)
+				   : assoc_reference (assoc_cell (var), "0");
+	      if (temp)
+		temp = (*temp && (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)))
+			  ? quote_string (temp)
+			  : quote_escapes (temp);
+	      else if (unbound_vars_is_error)
+		goto unbound_variable;
+	    }
+	  else
+#endif
+	    {
+	      temp = value_cell (var);
+
+	      temp = (*temp && (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)))
+			? quote_string (temp)
+			: ((pflags & PF_ASSIGNRHS) ? quote_rhs (temp)
+						   : quote_escapes (temp));
+	    }
+
+	  free (temp1);
+
+	  goto return0;
+	}
+      else if (var && (invisible_p (var) || var_isset (var) == 0))
+	temp = (char *)NULL;
+      else if ((var = find_variable_last_nameref (temp1, 0)) && var_isset (var) && invisible_p (var) == 0)
+	{
+	  temp = nameref_cell (var);
+#if defined (ARRAY_VARS)
+	  if (temp && *temp && valid_array_reference (temp, 0))
+	    {
+	      tdesc = parameter_brace_expand_word (temp, SPECIAL_VAR (temp, 0), quoted, pflags, (arrayind_t *)NULL);
+	      if (tdesc == &expand_wdesc_error || tdesc == &expand_wdesc_fatal)
+		return (tdesc);
+	      ret = tdesc;
+	      goto return0;
+	    }
+	  else
+#endif
+	  /* y=2 ; typeset -n x=y; echo $x is not the same as echo $2 in ksh */
+	  if (temp && *temp && legal_identifier (temp) == 0)
+	    {
+	      set_exit_status (EXECUTION_FAILURE);
+	      report_error (_("%s: invalid variable name for name reference"), temp);
+	      return (&expand_wdesc_error);	/* XXX */
+	    }
+	  else
+	    temp = (char *)NULL;
+	}
+
+      temp = (char *)NULL;
+
+unbound_variable:
+      if (unbound_vars_is_error)
+	{
+	  set_exit_status (EXECUTION_FAILURE);
+	  err_unboundvar (temp1);
+	}
+      else
+	{
+	  free (temp1);
+	  goto return0;
+	}
+
+      free (temp1);
+      set_exit_status (EXECUTION_FAILURE);
+      return ((unbound_vars_is_error && interactive_shell == 0)
+		? &expand_wdesc_fatal
+		: &expand_wdesc_error);
+    }
+
+  if (string[zindex])
+    zindex++;
+
+return0:
+  *sindex = zindex;
+
+  if (ret == 0)
+    {
+      ret = alloc_word_desc ();
+      ret->flags = tflag;	/* XXX */
+      ret->word = temp;
+    }
+  return ret;
+}
+
+void
+invalidate_cached_quoted_dollar_at ()
+{
+  dispose_words (cached_quoted_dollar_at);
+  cached_quoted_dollar_at = 0;
+}
+
+/* Make a word list which is the result of parameter and variable
+   expansion, command substitution, arithmetic substitution, and
+   quote removal of WORD.  Return a pointer to a WORD_LIST which is
+   the result of the expansion.  If WORD contains a null word, the
+   word list returned is also null.
+
+   QUOTED contains flag values defined in shell.h.
+
+   ISEXP is used to tell expand_word_internal that the word should be
+   treated as the result of an expansion.  This has implications for
+   how IFS characters in the word are treated.
+
+   CONTAINS_DOLLAR_AT and EXPANDED_SOMETHING are return values; when non-null
+   they point to an integer value which receives information about expansion.
+   CONTAINS_DOLLAR_AT gets non-zero if WORD contained "$@", else zero.
+   EXPANDED_SOMETHING get non-zero if WORD contained any parameter expansions,
+   else zero.
+
+   This only does word splitting in the case of $@ expansion.  In that
+   case, we split on ' '. */
+
+/* Values for the local variable quoted_state. */
+#define UNQUOTED	 0
+#define PARTIALLY_QUOTED 1
+#define WHOLLY_QUOTED    2
+
+static WORD_LIST *
+expand_word_internal (word, quoted, isexp, contains_dollar_at, expanded_something)
+     WORD_DESC *word;
+     int quoted, isexp;
+     int *contains_dollar_at;
+     int *expanded_something;
+{
+  WORD_LIST *list;
+  WORD_DESC *tword;
+
+  /* The intermediate string that we build while expanding. */
+  char *istring;
+
+  /* The current size of the above object. */
+  size_t istring_size;
+
+  /* Index into ISTRING. */
+  int istring_index;
+
+  /* Temporary string storage. */
+  char *temp, *temp1;
+
+  /* The text of WORD. */
+  register char *string;
+
+  /* The size of STRING. */
+  size_t string_size;
+
+  /* The index into STRING. */
+  int sindex;
+
+  /* This gets 1 if we see a $@ while quoted. */
+  int quoted_dollar_at;
+
+  /* One of UNQUOTED, PARTIALLY_QUOTED, or WHOLLY_QUOTED, depending on
+     whether WORD contains no quoting characters, a partially quoted
+     string (e.g., "xx"ab), or is fully quoted (e.g., "xxab"). */
+  int quoted_state;
+
+  /* State flags */
+  int had_quoted_null;
+  int has_quoted_ifs;		/* did we add a quoted $IFS character here? */
+  int has_dollar_at, temp_has_dollar_at;
+  int split_on_spaces;
+  int local_expanded;
+  int tflag;
+  int pflags;			/* flags passed to param_expand */
+  int mb_cur_max;
+
+  int assignoff;		/* If assignment, offset of `=' */
+
+  register unsigned char c;	/* Current character. */
+  int t_index;			/* For calls to string_extract_xxx. */
+
+  char twochars[2];
+
+  DECLARE_MBSTATE;
+
+  /* OK, let's see if we can optimize a common idiom: "$@" */
+  if (STREQ (word->word, "\"$@\"") &&
+      (word->flags == (W_HASDOLLAR|W_QUOTED)) &&
+      dollar_vars[1])		/* XXX - check IFS here as well? */
+    {
+      if (contains_dollar_at)
+	*contains_dollar_at = 1;
+      if (expanded_something)
+	*expanded_something = 1;
+      if (cached_quoted_dollar_at)
+	return (copy_word_list (cached_quoted_dollar_at));
+      list = list_rest_of_args ();
+      list = quote_list (list);
+      cached_quoted_dollar_at = copy_word_list (list);
+      return (list);
+    }
+
+  istring = (char *)xmalloc (istring_size = DEFAULT_INITIAL_ARRAY_SIZE);
+  istring[istring_index = 0] = '\0';
+  quoted_dollar_at = had_quoted_null = has_dollar_at = 0;
+  has_quoted_ifs = 0;
+  split_on_spaces = 0;
+  quoted_state = UNQUOTED;
+
+  string = word->word;
+  if (string == 0)
+    goto finished_with_string;
+  mb_cur_max = MB_CUR_MAX;
+
+  /* Don't need the string length for the SADD... and COPY_ macros unless
+     multibyte characters are possible, but do need it for bounds checking. */
+  string_size = (mb_cur_max > 1) ? strlen (string) : 1;
+
+  if (contains_dollar_at)
+    *contains_dollar_at = 0;
+
+  assignoff = -1;
+
+  /* Begin the expansion. */
+
+  for (sindex = 0; ;)
+    {
+      c = string[sindex];
+
+      /* Case on top-level character. */
+      switch (c)
+	{
+	case '\0':
+	  goto finished_with_string;
+
+	case CTLESC:
+	  sindex++;
+#if HANDLE_MULTIBYTE
+	  if (mb_cur_max > 1 && string[sindex])
+	    {
+	      SADD_MBQCHAR_BODY(temp, string, sindex, string_size);
+	    }
+	  else
+#endif
+	    {
+	      temp = (char *)xmalloc (3);
+	      temp[0] = CTLESC;
+	      temp[1] = c = string[sindex];
+	      temp[2] = '\0';
+	    }
+
+dollar_add_string:
+	  if (string[sindex])
+	    sindex++;
+
+add_string:
+	  if (temp)
+	    {
+	      istring = sub_append_string (temp, istring, &istring_index, &istring_size);
+	      temp = (char *)0;
+	    }
+
+	  break;
+
+#if defined (PROCESS_SUBSTITUTION)
+	  /* Process substitution. */
+	case '<':
+	case '>':
+	  {
+	       /* XXX - technically this should only be expanded at the start
+	       of a word */
+	    if (string[++sindex] != LPAREN || (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) || (word->flags & (W_DQUOTE|W_NOPROCSUB)))
+	      {
+		sindex--;	/* add_character: label increments sindex */
+		goto add_character;
+	      }
+	    else
+	      t_index = sindex + 1; /* skip past both '<' and LPAREN */
+
+	    temp1 = extract_process_subst (string, (c == '<') ? "<(" : ">(", &t_index, 0); /*))*/
+	    sindex = t_index;
+
+	    /* If the process substitution specification is `<()', we want to
+	       open the pipe for writing in the child and produce output; if
+	       it is `>()', we want to open the pipe for reading in the child
+	       and consume input. */
+	    temp = temp1 ? process_substitute (temp1, (c == '>')) : (char *)0;
+
+	    FREE (temp1);
+
+	    goto dollar_add_string;
+	  }
+#endif /* PROCESS_SUBSTITUTION */
+
+	case '=':
+	  /* Posix.2 section 3.6.1 says that tildes following `=' in words
+	     which are not assignment statements are not expanded.  If the
+	     shell isn't in posix mode, though, we perform tilde expansion
+	     on `likely candidate' unquoted assignment statements (flags
+	     include W_ASSIGNMENT but not W_QUOTED).  A likely candidate
+	     contains an unquoted :~ or =~.  Something to think about: we
+	     now have a flag that says  to perform tilde expansion on arguments
+	     to `assignment builtins' like declare and export that look like
+	     assignment statements.  We now do tilde expansion on such words
+	     even in POSIX mode. */	
+	  if (word->flags & (W_ASSIGNRHS|W_NOTILDE))
+	    {
+	      if (isexp == 0 && (word->flags & (W_NOSPLIT|W_NOSPLIT2)) == 0 && isifs (c))
+		goto add_ifs_character;
+	      else
+		goto add_character;
+	    }
+	  /* If we're not in posix mode or forcing assignment-statement tilde
+	     expansion, note where the first `=' appears in the word and prepare
+	     to do tilde expansion following the first `='. We have to keep
+	     track of the first `=' (using assignoff) to avoid being confused
+	     by an `=' in the rhs of the assignment statement. */
+	  if ((word->flags & W_ASSIGNMENT) &&
+	      (posixly_correct == 0 || (word->flags & W_TILDEEXP)) &&
+	      assignoff == -1 && sindex > 0)
+	    assignoff = sindex;
+	  if (sindex == assignoff && string[sindex+1] == '~')	/* XXX */
+	    word->flags |= W_ITILDE;
+
+	  if (word->flags & W_ASSIGNARG)
+	    word->flags |= W_ASSIGNRHS;		/* affects $@ */
+
+	  if (isexp == 0 && (word->flags & (W_NOSPLIT|W_NOSPLIT2)) == 0 && isifs (c))
+	    {
+	      has_quoted_ifs++;
+	      goto add_ifs_character;
+	    }
+	  else
+	    goto add_character;
+
+	case ':':
+	  if (word->flags & (W_NOTILDE|W_NOASSNTILDE))
+	    {
+	      if (isexp == 0 && (word->flags & (W_NOSPLIT|W_NOSPLIT2)) == 0 && isifs (c))
+		goto add_ifs_character;
+	      else
+		goto add_character;
+	    }
+
+	  if ((word->flags & (W_ASSIGNMENT|W_ASSIGNRHS)) &&
+	      (posixly_correct == 0 || (word->flags & W_TILDEEXP)) &&
+	      string[sindex+1] == '~')
+	    word->flags |= W_ITILDE;
+
+	  if (isexp == 0 && (word->flags & (W_NOSPLIT|W_NOSPLIT2)) == 0 && isifs (c))
+	    goto add_ifs_character;
+	  else
+	    goto add_character;
+
+	case '~':
+	  /* If the word isn't supposed to be tilde expanded, or we're not
+	     at the start of a word or after an unquoted : or = in an
+	     assignment statement, we don't do tilde expansion.  We don't
+	     do tilde expansion if quoted or in an arithmetic context. */
+
+	  if ((word->flags & (W_NOTILDE|W_DQUOTE)) ||
+	      (sindex > 0 && ((word->flags & W_ITILDE) == 0)) ||
+	      (quoted & (Q_DOUBLE_QUOTES|Q_HERE_DOCUMENT)))
+	    {
+	      word->flags &= ~W_ITILDE;
+	      if (isexp == 0 && (word->flags & (W_NOSPLIT|W_NOSPLIT2)) == 0 && isifs (c) && (quoted & (Q_DOUBLE_QUOTES|Q_HERE_DOCUMENT)) == 0)
+		goto add_ifs_character;
+	      else
+		goto add_character;
+	    }
+
+	  if (word->flags & W_ASSIGNRHS)
+	    tflag = 2;
+	  else if (word->flags & (W_ASSIGNMENT|W_TILDEEXP))
+	    tflag = 1;
+	  else
+	    tflag = 0;
+
+	  temp = bash_tilde_find_word (string + sindex, tflag, &t_index);
+	    
+	  word->flags &= ~W_ITILDE;
+
+	  if (temp && *temp && t_index > 0)
+	    {
+	      temp1 = bash_tilde_expand (temp, tflag);
+	      if  (temp1 && *temp1 == '~' && STREQ (temp, temp1))
+		{
+		  FREE (temp);
+		  FREE (temp1);
+		  goto add_character;		/* tilde expansion failed */
+		}
+	      free (temp);
+	      temp = temp1;
+	      sindex += t_index;
+	      goto add_quoted_string;		/* XXX was add_string */
+	    }
+	  else
+	    {
+	      FREE (temp);
+	      goto add_character;
+	    }
+	
+	case '$':
+	  if (expanded_something)
+	    *expanded_something = 1;
+	  local_expanded = 1;
+
+	  temp_has_dollar_at = 0;
+	  pflags = (word->flags & W_NOCOMSUB) ? PF_NOCOMSUB : 0;
+	  if (word->flags & W_NOSPLIT2)
+	    pflags |= PF_NOSPLIT2;
+	  if (word->flags & W_ASSIGNRHS)
+	    pflags |= PF_ASSIGNRHS;
+	  if (word->flags & W_COMPLETE)
+	    pflags |= PF_COMPLETE;
+
+	  tword = param_expand (string, &sindex, quoted, expanded_something,
+			       &temp_has_dollar_at, &quoted_dollar_at,
+			       &had_quoted_null, pflags);
+	  has_dollar_at += temp_has_dollar_at;
+	  split_on_spaces += (tword->flags & W_SPLITSPACE);
+
+	  if (tword == &expand_wdesc_error || tword == &expand_wdesc_fatal)
+	    {
+	      free (string);
+	      free (istring);
+	      return ((tword == &expand_wdesc_error) ? &expand_word_error
+						     : &expand_word_fatal);
+	    }
+	  if (contains_dollar_at && has_dollar_at)
+	    *contains_dollar_at = 1;
+
+	  if (tword && (tword->flags & W_HASQUOTEDNULL))
+	    had_quoted_null = 1;		/* note for later */
+	  if (tword && (tword->flags & W_SAWQUOTEDNULL))
+	    had_quoted_null = 1;		/* XXX */
+
+	  temp = tword ? tword->word : (char *)NULL;
+	  dispose_word_desc (tword);
+
+	  /* Kill quoted nulls; we will add them back at the end of
+	     expand_word_internal if nothing else in the string */
+	  if (had_quoted_null && temp && QUOTED_NULL (temp))
+	    {
+	      FREE (temp);
+	      temp = (char *)NULL;
+	    }
+
+	  goto add_string;
+	  break;
+
+	case '`':		/* Backquoted command substitution. */
+	  {
+	    t_index = sindex++;
+
+	    temp = string_extract (string, &sindex, "`", SX_REQMATCH);
+	    /* The test of sindex against t_index is to allow bare instances of
+	       ` to pass through, for backwards compatibility. */
+	    if (temp == &extract_string_error || temp == &extract_string_fatal)
+	      {
+		if (sindex - 1 == t_index)
+		  {
+		    sindex = t_index;
+		    goto add_character;
+		  }
+		set_exit_status (EXECUTION_FAILURE);
+		report_error (_("bad substitution: no closing \"`\" in %s") , string+t_index);
+		free (string);
+		free (istring);
+		return ((temp == &extract_string_error) ? &expand_word_error
+							: &expand_word_fatal);
+	      }
+		
+	    if (expanded_something)
+	      *expanded_something = 1;
+	    local_expanded = 1;
+
+	    if (word->flags & W_NOCOMSUB)
+	      /* sindex + 1 because string[sindex] == '`' */
+	      temp1 = substring (string, t_index, sindex + 1);
+	    else
+	      {
+		de_backslash (temp);
+		tword = command_substitute (temp, quoted, 0);
+		temp1 = tword ? tword->word : (char *)NULL;
+		if (tword)
+		  dispose_word_desc (tword);
+	      }
+	    FREE (temp);
+	    temp = temp1;
+	    goto dollar_add_string;
+	  }
+
+	case '\\':
+	  if (string[sindex + 1] == '\n')
+	    {
+	      sindex += 2;
+	      continue;
+	    }
+
+	  c = string[++sindex];
+
+	  /* "However, the double-quote character ( '"' ) shall not be treated
+	     specially within a here-document, except when the double-quote
+	     appears within "$()", "``", or "${}"." */
+	  if ((quoted & Q_HERE_DOCUMENT) && (quoted & Q_DOLBRACE) && c == '"')
+	    tflag = CBSDQUOTE;		/* special case */
+	  else if (quoted & Q_HERE_DOCUMENT)
+	    tflag = CBSHDOC;
+	  else if (quoted & Q_DOUBLE_QUOTES)
+	    tflag = CBSDQUOTE;
+	  else
+	    tflag = 0;
+
+	  /* From Posix discussion on austin-group list:  Backslash escaping
+	     a } in ${...} is removed.  Issue 0000221 */
+	  if ((quoted & Q_DOLBRACE) && c == RBRACE)
+	    {
+	      SCOPY_CHAR_I (twochars, CTLESC, c, string, sindex, string_size);
+	    }
+	  /* This is the fix for " $@\ " */
+	  else if ((quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) && ((sh_syntaxtab[c] & tflag) == 0) && isexp == 0 && isifs (c))
+	    {
+	      RESIZE_MALLOCED_BUFFER (istring, istring_index, 2, istring_size,
+				      DEFAULT_ARRAY_SIZE);
+	      istring[istring_index++] = CTLESC;
+	      istring[istring_index++] = '\\';
+	      istring[istring_index] = '\0';
+
+	      SCOPY_CHAR_I (twochars, CTLESC, c, string, sindex, string_size);
+	    }
+	  else if ((quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) && c == 0)
+	    {
+	      RESIZE_MALLOCED_BUFFER (istring, istring_index, 2, istring_size,
+				      DEFAULT_ARRAY_SIZE);
+	      istring[istring_index++] = CTLESC;
+	      istring[istring_index++] = '\\';
+	      istring[istring_index] = '\0';
+	      break;	      
+	    }
+	  else if ((quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) && ((sh_syntaxtab[c] & tflag) == 0))
+	    {
+	      SCOPY_CHAR_I (twochars, '\\', c, string, sindex, string_size);
+	    }
+	  else if (c == 0)
+	    {
+	      c = CTLNUL;
+	      sindex--;		/* add_character: label increments sindex */
+	      goto add_character;
+	    }
+	  else
+	    {
+	      SCOPY_CHAR_I (twochars, CTLESC, c, string, sindex, string_size);
+	    }
+
+	  sindex++;
+add_twochars:
+	  /* BEFORE jumping here, we need to increment sindex if appropriate */
+	  RESIZE_MALLOCED_BUFFER (istring, istring_index, 2, istring_size,
+				  DEFAULT_ARRAY_SIZE);
+	  istring[istring_index++] = twochars[0];
+	  istring[istring_index++] = twochars[1];
+	  istring[istring_index] = '\0';
+
+	  break;
+
+	case '"':
+	  if ((quoted & (Q_DOUBLE_QUOTES|Q_HERE_DOCUMENT)) && ((quoted & Q_ARITH) == 0))
+	    goto add_character;
+
+	  t_index = ++sindex;
+	  temp = string_extract_double_quoted (string, &sindex, (word->flags & W_COMPLETE) ? SX_COMPLETE : 0);
+
+	  /* If the quotes surrounded the entire string, then the
+	     whole word was quoted. */
+	  quoted_state = (t_index == 1 && string[sindex] == '\0')
+			    ? WHOLLY_QUOTED
+			    : PARTIALLY_QUOTED;
+
+	  if (temp && *temp)
+	    {
+	      tword = alloc_word_desc ();
+	      tword->word = temp;
+
+	      if (word->flags & W_ASSIGNARG)
+		tword->flags |= word->flags & (W_ASSIGNARG|W_ASSIGNRHS); /* affects $@ */
+	      if (word->flags & W_COMPLETE)
+		tword->flags |= W_COMPLETE;	/* for command substitutions */
+	      if (word->flags & W_NOCOMSUB)
+		tword->flags |= W_NOCOMSUB;
+	      if (word->flags & W_NOPROCSUB)
+		tword->flags |= W_NOPROCSUB;
+
+	      if (word->flags & W_ASSIGNRHS)
+		tword->flags |= W_ASSIGNRHS;
+
+	      temp = (char *)NULL;
+
+	      temp_has_dollar_at = 0;	/* does this quoted (sub)string include $@? */
+	      /* Need to get W_HASQUOTEDNULL flag through this function. */
+	      list = expand_word_internal (tword, Q_DOUBLE_QUOTES, 0, &temp_has_dollar_at, (int *)NULL);
+	      has_dollar_at += temp_has_dollar_at;
+
+	      if (list == &expand_word_error || list == &expand_word_fatal)
+		{
+		  free (istring);
+		  free (string);
+		  /* expand_word_internal has already freed temp_word->word
+		     for us because of the way it prints error messages. */
+		  tword->word = (char *)NULL;
+		  dispose_word (tword);
+		  return list;
+		}
+
+	      dispose_word (tword);
+
+	      /* "$@" (a double-quoted dollar-at) expands into nothing,
+		 not even a NULL word, when there are no positional
+		 parameters.  Posix interp 888 says that other parts of the
+		 word that expand to quoted nulls result in quoted nulls, so
+		 we can't just throw the entire word away if we have "$@"
+		 anywhere in it.  We use had_quoted_null to keep track */
+	      if (list == 0 && temp_has_dollar_at)	/* XXX - was has_dollar_at */
+		{
+		  quoted_dollar_at++;
+		  break;
+		}
+
+	      /* If this list comes back with a quoted null from expansion,
+		 we have either "$x" or "$@" with $1 == ''. In either case,
+		 we need to make sure we add a quoted null argument and
+		 disable the special handling that "$@" gets. */
+	      if (list && list->word && list->next == 0 && (list->word->flags & W_HASQUOTEDNULL))
+		{
+		  if (had_quoted_null && temp_has_dollar_at)
+		    quoted_dollar_at++;
+		  had_quoted_null = 1;		/* XXX */
+		}
+
+	      /* If we get "$@", we know we have expanded something, so we
+		 need to remember it for the final split on $IFS.  This is
+		 a special case; it's the only case where a quoted string
+		 can expand into more than one word.  It's going to come back
+		 from the above call to expand_word_internal as a list with
+		 multiple words. */
+	      if (list)
+		dequote_list (list);
+
+	      if (temp_has_dollar_at)		/* XXX - was has_dollar_at */
+		{
+		  quoted_dollar_at++;
+		  if (contains_dollar_at)
+		    *contains_dollar_at = 1;
+		  if (expanded_something)
+		    *expanded_something = 1;
+		  local_expanded = 1;
+		}
+	    }
+	  else
+	    {
+	      /* What we have is "".  This is a minor optimization. */
+	      FREE (temp);
+	      list = (WORD_LIST *)NULL;
+	      had_quoted_null = 1;	/* note for later */
+	    }
+
+	  /* The code above *might* return a list (consider the case of "$@",
+	     where it returns "$1", "$2", etc.).  We can't throw away the
+	     rest of the list, and we have to make sure each word gets added
+	     as quoted.  We test on tresult->next:  if it is non-NULL, we
+	     quote the whole list, save it to a string with string_list, and
+	     add that string. We don't need to quote the results of this
+	     (and it would be wrong, since that would quote the separators
+	     as well), so we go directly to add_string. */
+	  if (list)
+	    {
+	      if (list->next)
+		{
+		  /* Testing quoted_dollar_at makes sure that "$@" is
+		     split correctly when $IFS does not contain a space. */
+		  temp = quoted_dollar_at
+				? string_list_dollar_at (list, Q_DOUBLE_QUOTES, 0)
+				: string_list (quote_list (list));
+		  dispose_words (list);
+		  goto add_string;
+		}
+	      else
+		{
+		  temp = savestring (list->word->word);
+		  tflag = list->word->flags;
+		  dispose_words (list);
+
+		  /* If the string is not a quoted null string, we want
+		     to remove any embedded unquoted CTLNUL characters.
+		     We do not want to turn quoted null strings back into
+		     the empty string, though.  We do this because we
+		     want to remove any quoted nulls from expansions that
+		     contain other characters.  For example, if we have
+		     x"$*"y or "x$*y" and there are no positional parameters,
+		     the $* should expand into nothing. */
+		  /* We use the W_HASQUOTEDNULL flag to differentiate the
+		     cases:  a quoted null character as above and when
+		     CTLNUL is contained in the (non-null) expansion
+		     of some variable.  We use the had_quoted_null flag to
+		     pass the value through this function to its caller. */
+		  if ((tflag & W_HASQUOTEDNULL) && QUOTED_NULL (temp) == 0)
+		    remove_quoted_nulls (temp);	/* XXX */
+		}
+	    }
+	  else
+	    temp = (char *)NULL;
+
+	  if (temp == 0 && quoted_state == PARTIALLY_QUOTED)
+	    had_quoted_null = 1;	/* note for later */
+
+	  /* We do not want to add quoted nulls to strings that are only
+	     partially quoted; we can throw them away.  The exception to
+	     this is when we are going to be performing word splitting,
+	     since we have to preserve a null argument if the next character
+	     will cause word splitting. */
+	  if (temp == 0 && quoted_state == PARTIALLY_QUOTED && quoted == 0 && (word->flags & (W_NOSPLIT|W_EXPANDRHS|W_ASSIGNRHS)) == W_EXPANDRHS)
+	    {
+	      c = CTLNUL;
+	      sindex--;
+	      had_quoted_null = 1;
+	      goto add_character;
+	    }
+	  if (temp == 0 && quoted_state == PARTIALLY_QUOTED && (word->flags & (W_NOSPLIT|W_NOSPLIT2)))
+	    continue;
+
+	add_quoted_string:
+
+	  if (temp)
+	    {
+	      temp1 = temp;
+	      temp = quote_string (temp);
+	      free (temp1);
+	      goto add_string;
+	    }
+	  else
+	    {
+	      /* Add NULL arg. */
+	      c = CTLNUL;
+	      sindex--;		/* add_character: label increments sindex */
+	      had_quoted_null = 1;	/* note for later */
+	      goto add_character;
+	    }
+
+	  /* break; */
+
+	case '\'':
+	  if ((quoted & (Q_DOUBLE_QUOTES|Q_HERE_DOCUMENT)))
+	    goto add_character;
+
+	  t_index = ++sindex;
+	  temp = string_extract_single_quoted (string, &sindex);
+
+	  /* If the entire STRING was surrounded by single quotes,
+	     then the string is wholly quoted. */
+	  quoted_state = (t_index == 1 && string[sindex] == '\0')
+			    ? WHOLLY_QUOTED
+			    : PARTIALLY_QUOTED;
+
+	  /* If all we had was '', it is a null expansion. */
+	  if (*temp == '\0')
+	    {
+	      free (temp);
+	      temp = (char *)NULL;
+	    }
+	  else
+	    remove_quoted_escapes (temp);	/* ??? */
+
+	  if (temp == 0 && quoted_state == PARTIALLY_QUOTED)
+	    had_quoted_null = 1;	/* note for later */
+
+	  /* We do not want to add quoted nulls to strings that are only
+	     partially quoted; such nulls are discarded.  See above for the
+	     exception, which is when the string is going to be split.
+	     Posix interp 888/1129 */
+	  if (temp == 0 && quoted_state == PARTIALLY_QUOTED && quoted == 0 && (word->flags & (W_NOSPLIT|W_EXPANDRHS|W_ASSIGNRHS)) == W_EXPANDRHS)
+	    {
+	      c = CTLNUL;
+	      sindex--;
+	      goto add_character;
+	    }
+
+	  if (temp == 0 && (quoted_state == PARTIALLY_QUOTED) && (word->flags & (W_NOSPLIT|W_NOSPLIT2)))
+	    continue;
+
+	  /* If we have a quoted null expansion, add a quoted NULL to istring. */
+	  if (temp == 0)
+	    {
+	      c = CTLNUL;
+	      sindex--;		/* add_character: label increments sindex */
+	      goto add_character;
+	    }
+	  else
+	    goto add_quoted_string;
+
+	  /* break; */
+
+	case ' ':
+	  /* If we are in a context where the word is not going to be split, but
+	     we need to account for $@ and $* producing one word for each
+	     positional parameter, add quoted spaces so the spaces in the
+	     expansion of "$@", if any, behave correctly. We still may need to
+	     split if we are expanding the rhs of a word expansion. */
+	  if (ifs_is_null || split_on_spaces || ((word->flags & (W_NOSPLIT|W_NOSPLIT2|W_ASSIGNRHS)) && (word->flags & W_EXPANDRHS) == 0))
+	    {
+	      if (string[sindex])
+		sindex++;
+	      twochars[0] = CTLESC;
+	      twochars[1] = c;
+	      goto add_twochars;
+	    }
+	  /* FALLTHROUGH */
+	  
+	default:
+	  /* This is the fix for " $@ " */
+add_ifs_character:
+	  if ((quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) || (isexp == 0 && isifs (c) && (word->flags & (W_NOSPLIT|W_NOSPLIT2)) == 0))
+	    {
+	      if ((quoted&(Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) == 0)
+		has_quoted_ifs++;
+add_quoted_character:
+	      if (string[sindex])	/* from old goto dollar_add_string */
+		sindex++;
+	      if (c == 0)
+		{
+		  c = CTLNUL;
+		  goto add_character;
+		}
+	      else
+		{
+#if HANDLE_MULTIBYTE
+		  /* XXX - should make sure that c is actually multibyte,
+		     otherwise we can use the twochars branch */
+		  if (mb_cur_max > 1)
+		    sindex--;
+
+		  if (mb_cur_max > 1)
+		    {
+		      SADD_MBQCHAR_BODY(temp, string, sindex, string_size);
+		    }
+		  else
+#endif
+		    {
+		      twochars[0] = CTLESC;
+		      twochars[1] = c;
+		      goto add_twochars;
+		    }
+		}
+	    }
+
+	  SADD_MBCHAR (temp, string, sindex, string_size);
+
+add_character:
+	  RESIZE_MALLOCED_BUFFER (istring, istring_index, 1, istring_size,
+				  DEFAULT_ARRAY_SIZE);
+	  istring[istring_index++] = c;
+	  istring[istring_index] = '\0';
+
+	  /* Next character. */
+	  sindex++;
+	}
+    }
+
+finished_with_string:
+  /* OK, we're ready to return.  If we have a quoted string, and
+     quoted_dollar_at is not set, we do no splitting at all; otherwise
+     we split on ' '.  The routines that call this will handle what to
+     do if nothing has been expanded. */
+
+  /* Partially and wholly quoted strings which expand to the empty
+     string are retained as an empty arguments.  Unquoted strings
+     which expand to the empty string are discarded.  The single
+     exception is the case of expanding "$@" when there are no
+     positional parameters.  In that case, we discard the expansion. */
+
+  /* Because of how the code that handles "" and '' in partially
+     quoted strings works, we need to make ISTRING into a QUOTED_NULL
+     if we saw quoting characters, but the expansion was empty.
+     "" and '' are tossed away before we get to this point when
+     processing partially quoted strings.  This makes "" and $xxx""
+     equivalent when xxx is unset.  We also look to see whether we
+     saw a quoted null from a ${} expansion and add one back if we
+     need to. */
+
+  /* If we expand to nothing and there were no single or double quotes
+     in the word, we throw it away.  Otherwise, we return a NULL word.
+     The single exception is for $@ surrounded by double quotes when
+     there are no positional parameters.  In that case, we also throw
+     the word away. */
+
+  if (*istring == '\0')
+    {
+      if (quoted_dollar_at == 0 && (had_quoted_null || quoted_state == PARTIALLY_QUOTED))
+	{
+	  istring[0] = CTLNUL;
+	  istring[1] = '\0';
+	  tword = alloc_word_desc ();
+	  tword->word = istring;
+	  istring = 0;		/* avoid later free() */
+	  tword->flags |= W_HASQUOTEDNULL;		/* XXX */
+	  list = make_word_list (tword, (WORD_LIST *)NULL);
+	  if (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES))
+	    tword->flags |= W_QUOTED;
+	}
+      /* According to sh, ksh, and Posix.2, if a word expands into nothing
+	 and a double-quoted "$@" appears anywhere in it, then the entire
+	 word is removed. */
+      /* XXX - exception appears to be that quoted null strings result in
+	 null arguments */
+      else  if (quoted_state == UNQUOTED || quoted_dollar_at)
+	list = (WORD_LIST *)NULL;
+      else
+	list = (WORD_LIST *)NULL;
+    }
+  else if (word->flags & W_NOSPLIT)
+    {
+      tword = alloc_word_desc ();
+      tword->word = istring;
+      if (had_quoted_null && QUOTED_NULL (istring))
+	tword->flags |= W_HASQUOTEDNULL;
+      istring = 0;		/* avoid later free() */
+      if (word->flags & W_ASSIGNMENT)
+	tword->flags |= W_ASSIGNMENT;	/* XXX */
+      if (word->flags & W_COMPASSIGN)
+	tword->flags |= W_COMPASSIGN;	/* XXX */
+      if (word->flags & W_NOGLOB)
+	tword->flags |= W_NOGLOB;	/* XXX */
+      if (word->flags & W_NOBRACE)
+	tword->flags |= W_NOBRACE;	/* XXX */
+      if (quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES))
+	tword->flags |= W_QUOTED;
+      list = make_word_list (tword, (WORD_LIST *)NULL);
+    }
+  else if (word->flags & W_ASSIGNRHS)
+    {
+      list = list_string (istring, "", quoted);
+      tword = list->word;
+      if (had_quoted_null && QUOTED_NULL (istring))
+	tword->flags |= W_HASQUOTEDNULL;
+      free (list);
+      free (istring);
+      istring = 0;			/* avoid later free() */
+      goto set_word_flags;
+    }
+  else
+    {
+      char *ifs_chars;
+
+      ifs_chars = (quoted_dollar_at || has_dollar_at) ? ifs_value : (char *)NULL;
+
+      /* If we have $@, we need to split the results no matter what.  If
+	 IFS is unset or NULL, string_list_dollar_at has separated the
+	 positional parameters with a space, so we split on space (we have
+	 set ifs_chars to " \t\n" above if ifs is unset).  If IFS is set,
+	 string_list_dollar_at has separated the positional parameters
+	 with the first character of $IFS, so we split on $IFS.  If
+	 SPLIT_ON_SPACES is set, we expanded $* (unquoted) with IFS either
+	 unset or null, and we want to make sure that we split on spaces
+	 regardless of what else has happened to IFS since the expansion,
+	 or we expanded "$@" with IFS null and we need to split the positional
+	 parameters into separate words. */
+      if (split_on_spaces)
+	{
+	  /* If IFS is not set, and the word is not quoted, we want to split
+	     the individual words on $' \t\n'. We rely on previous steps to
+	     quote the portions of the word that should not be split */
+	  if (ifs_is_set == 0)
+	    list = list_string (istring, " \t\n", 1);	/* XXX quoted == 1? */
+	  else
+	    list = list_string (istring, " ", 1);	/* XXX quoted == 1? */
+	}
+
+      /* If we have $@ (has_dollar_at != 0) and we are in a context where we
+	 don't want to split the result (W_NOSPLIT2), and we are not quoted,
+	 we have already separated the arguments with the first character of
+	 $IFS.  In this case, we want to return a list with a single word
+	 with the separator possibly replaced with a space (it's what other
+	 shells seem to do).
+	 quoted_dollar_at is internal to this function and is set if we are
+	 passed an argument that is unquoted (quoted == 0) but we encounter a
+	 double-quoted $@ while expanding it. */
+      else if (has_dollar_at && quoted_dollar_at == 0 && ifs_chars && quoted == 0 && (word->flags & W_NOSPLIT2))
+	{
+	  tword = alloc_word_desc ();
+	  /* Only split and rejoin if we have to */
+	  if (*ifs_chars && *ifs_chars != ' ')
+	    {
+	      /* list_string dequotes CTLESCs in the string it's passed, so we
+		 need it to get the space separation right if space isn't the
+		 first character in IFS (but is present) and to remove the 
+		 quoting we added back in param_expand(). */
+	      list = list_string (istring, *ifs_chars ? ifs_chars : " ", 1);
+	      /* This isn't exactly right in the case where we're expanding
+		 the RHS of an expansion like ${var-$@} where IFS=: (for
+		 example). The W_NOSPLIT2 means we do the separation with :;
+		 the list_string removes the quotes and breaks the string into
+		 a list, and the string_list rejoins it on spaces. When we
+		 return, we expect to be able to split the results, but the
+		 space separation means the right split doesn't happen. */
+	      tword->word = string_list (list);	
+	    }
+	  else
+	    tword->word = istring;
+	  if (had_quoted_null && QUOTED_NULL (istring))
+	    tword->flags |= W_HASQUOTEDNULL;	/* XXX */
+	  if (tword->word != istring)
+	    free (istring);
+	  istring = 0;			/* avoid later free() */
+	  goto set_word_flags;
+	}
+      else if (has_dollar_at && ifs_chars)
+	list = list_string (istring, *ifs_chars ? ifs_chars : " ", 1);
+      else
+	{
+	  tword = alloc_word_desc ();
+	  if (expanded_something && *expanded_something == 0 && has_quoted_ifs)
+	    tword->word = remove_quoted_ifs (istring);
+	  else
+	    tword->word = istring;
+	  if (had_quoted_null && QUOTED_NULL (istring))	/* should check for more than one */
+	    tword->flags |= W_HASQUOTEDNULL;	/* XXX */
+	  else if (had_quoted_null)
+	    tword->flags |= W_SAWQUOTEDNULL;	/* XXX */
+	  if (tword->word != istring)
+	    free (istring);
+	  istring = 0;			/* avoid later free() */
+set_word_flags:
+	  if ((quoted & (Q_DOUBLE_QUOTES|Q_HERE_DOCUMENT)) || (quoted_state == WHOLLY_QUOTED))
+	    tword->flags |= W_QUOTED;
+	  if (word->flags & W_ASSIGNMENT)
+	    tword->flags |= W_ASSIGNMENT;
+	  if (word->flags & W_COMPASSIGN)
+	    tword->flags |= W_COMPASSIGN;
+	  if (word->flags & W_NOGLOB)
+	    tword->flags |= W_NOGLOB;
+	  if (word->flags & W_NOBRACE)
+	    tword->flags |= W_NOBRACE;
+	  list = make_word_list (tword, (WORD_LIST *)NULL);
+	}
+    }
+
+  free (istring);
+  return (list);
+}
+
+/* **************************************************************** */
+/*								    */
+/*		   Functions for Quote Removal			    */
+/*								    */
+/* **************************************************************** */
+
+/* Perform quote removal on STRING.  If QUOTED > 0, assume we are obeying the
+   backslash quoting rules for within double quotes or a here document. */
+char *
+string_quote_removal (string, quoted)
+     char *string;
+     int quoted;
+{
+  size_t slen;
+  char *r, *result_string, *temp, *send;
+  int sindex, tindex, dquote;
+  unsigned char c;
+  DECLARE_MBSTATE;
+
+  /* The result can be no longer than the original string. */
+  slen = strlen (string);
+  send = string + slen;
+
+  r = result_string = (char *)xmalloc (slen + 1);
+
+  for (dquote = sindex = 0; c = string[sindex];)
+    {
+      switch (c)
+	{
+	case '\\':
+	  c = string[++sindex];
+	  if (c == 0)
+	    {
+	      *r++ = '\\';
+	      break;
+	    }
+	  if (((quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) || dquote) && (sh_syntaxtab[c] & CBSDQUOTE) == 0)
+	    *r++ = '\\';
+	  /* FALLTHROUGH */
+
+	default:
+	  SCOPY_CHAR_M (r, string, send, sindex);
+	  break;
+
+	case '\'':
+	  if ((quoted & (Q_HERE_DOCUMENT|Q_DOUBLE_QUOTES)) || dquote)
+	    {
+	      *r++ = c;
+	      sindex++;
+	      break;
+	    }
+	  tindex = sindex + 1;
+	  temp = string_extract_single_quoted (string, &tindex);
+	  if (temp)
+	    {
+	      strcpy (r, temp);
+	      r += strlen (r);
+	      free (temp);
+	    }
+	  sindex = tindex;
+	  break;
+
+	case '"':
+	  dquote = 1 - dquote;
+	  sindex++;
+	  break;
+	}
+    }
+    *r = '\0';
+    return (result_string);
+}
+
+#if 0
+/* UNUSED */
+/* Perform quote removal on word WORD.  This allocates and returns a new
+   WORD_DESC *. */
+WORD_DESC *
+word_quote_removal (word, quoted)
+     WORD_DESC *word;
+     int quoted;
+{
+  WORD_DESC *w;
+  char *t;
+
+  t = string_quote_removal (word->word, quoted);
+  w = alloc_word_desc ();
+  w->word = t ? t : savestring ("");
+  return (w);
+}
+
+/* Perform quote removal on all words in LIST.  If QUOTED is non-zero,
+   the members of the list are treated as if they are surrounded by
+   double quotes.  Return a new list, or NULL if LIST is NULL. */
+WORD_LIST *
+word_list_quote_removal (list, quoted)
+     WORD_LIST *list;
+     int quoted;
+{
+  WORD_LIST *result, *t, *tresult, *e;
+
+  for (t = list, result = (WORD_LIST *)NULL; t; t = t->next)
+    {
+      tresult = make_word_list (word_quote_removal (t->word, quoted), (WORD_LIST *)NULL);
+#if 0
+      result = (WORD_LIST *) list_append (result, tresult);
+#else
+      if (result == 0)
+	result = e = tresult;
+      else
+	{
+	  e->next = tresult;
+	  while (e->next)
+	    e = e->next;
+	}
+#endif
+    }
+  return (result);
+}
+#endif
+
+/*******************************************
+ *					   *
+ *    Functions to perform word splitting  *
+ *					   *
+ *******************************************/
+
+void
+setifs (v)
+     SHELL_VAR *v;
+{
+  char *t;
+  unsigned char uc;
+
+  ifs_var = v;
+  ifs_value = (v && value_cell (v)) ? value_cell (v) : " \t\n";
+
+  ifs_is_set = ifs_var != 0;
+  ifs_is_null = ifs_is_set && (*ifs_value == 0);
+
+  /* Should really merge ifs_cmap with sh_syntaxtab.  XXX - doesn't yet
+     handle multibyte chars in IFS */
+  memset (ifs_cmap, '\0', sizeof (ifs_cmap));
+  for (t = ifs_value ; t && *t; t++)
+    {
+      uc = *t;
+      ifs_cmap[uc] = 1;
+    }
+
+#if defined (HANDLE_MULTIBYTE)
+  if (ifs_value == 0)
+    {
+      ifs_firstc[0] = '\0';	/* XXX - ? */
+      ifs_firstc_len = 1;
+    }
+  else
+    {
+      if (locale_utf8locale && UTF8_SINGLEBYTE (*ifs_value))
+	ifs_firstc_len = (*ifs_value != 0) ? 1 : 0;
+      else
+	{
+	  size_t ifs_len;
+	  ifs_len = strnlen (ifs_value, MB_CUR_MAX);
+	  ifs_firstc_len = MBLEN (ifs_value, ifs_len);
+	}
+      if (ifs_firstc_len == 1 || ifs_firstc_len == 0 || MB_INVALIDCH (ifs_firstc_len))
+	{
+	  ifs_firstc[0] = ifs_value[0];
+	  ifs_firstc[1] = '\0';
+	  ifs_firstc_len = 1;
+	}
+      else
+	memcpy (ifs_firstc, ifs_value, ifs_firstc_len);
+    }
+#else
+  ifs_firstc = ifs_value ? *ifs_value : 0;
+#endif
+}
+
+char *
+getifs ()
+{
+  return ifs_value;
+}
+
+/* This splits a single word into a WORD LIST on $IFS, but only if the word
+   is not quoted.  list_string () performs quote removal for us, even if we
+   don't do any splitting. */
+WORD_LIST *
+word_split (w, ifs_chars)
+     WORD_DESC *w;
+     char *ifs_chars;
+{
+  WORD_LIST *result;
+
+  if (w)
+    {
+      char *xifs;
+
+      xifs = ((w->flags & W_QUOTED) || ifs_chars == 0) ? "" : ifs_chars;
+      result = list_string (w->word, xifs, w->flags & W_QUOTED);
+    }
+  else
+    result = (WORD_LIST *)NULL;
+
+  return (result);
+}
+
+/* Perform word splitting on LIST and return the RESULT.  It is possible
+   to return (WORD_LIST *)NULL. */
+static WORD_LIST *
+word_list_split (list)
+     WORD_LIST *list;
+{
+  WORD_LIST *result, *t, *tresult, *e;
+  WORD_DESC *w;
+
+  for (t = list, result = (WORD_LIST *)NULL; t; t = t->next)
+    {
+      tresult = word_split (t->word, ifs_value);
+      /* POSIX 2.6: "If the complete expansion appropriate for a word results
+	 in an empty field, that empty field shall be deleted from the list
+	 of fields that form the completely expanded command, unless the
+	 original word contained single-quote or double-quote characters."
+	 This is where we handle these words that contain quoted null strings
+	 and other characters that expand to nothing after word splitting. */
+      if (tresult == 0 && t->word && (t->word->flags & W_SAWQUOTEDNULL))	/* XXX */
+	{
+	  w = alloc_word_desc ();
+	  w->word = (char *)xmalloc (1);
+	  w->word[0] = '\0';
+	  tresult = make_word_list (w, (WORD_LIST *)NULL);
+	}
+      if (result == 0)
+        result = e = tresult;
+      else
+	{
+	  e->next = tresult;
+	  while (e->next)
+	    e = e->next;
+	}
+    }
+  return (result);
+}
+
+/**************************************************
+ * 						  *
+ *    Functions to expand an entire WORD_LIST	  *
+ *						  *
+ **************************************************/
+
+/* Do any word-expansion-specific cleanup and jump to top_level */
+static void
+exp_jump_to_top_level (v)
+     int v;
+{
+  set_pipestatus_from_exit (last_command_exit_value);
+
+  /* Cleanup code goes here. */
+  expand_no_split_dollar_star = 0;	/* XXX */
+  if (expanding_redir)
+    undo_partial_redirects ();
+  expanding_redir = 0;
+  assigning_in_environment = 0;
+
+  if (parse_and_execute_level == 0)
+    top_level_cleanup ();			/* from sig.c */
+
+  jump_to_top_level (v);
+}
+
+/* Put NLIST (which is a WORD_LIST * of only one element) at the front of
+   ELIST, and set ELIST to the new list. */
+#define PREPEND_LIST(nlist, elist) \
+	do { nlist->next = elist; elist = nlist; } while (0)
+
+/* Separate out any initial variable assignments from TLIST.  If set -k has
+   been executed, remove all assignment statements from TLIST.  Initial
+   variable assignments and other environment assignments are placed
+   on SUBST_ASSIGN_VARLIST. */
+static WORD_LIST *
+separate_out_assignments (tlist)
+     WORD_LIST *tlist;
+{
+  register WORD_LIST *vp, *lp;
+
+  if (tlist == 0)
+    return ((WORD_LIST *)NULL);
+
+  if (subst_assign_varlist)
+    dispose_words (subst_assign_varlist);	/* Clean up after previous error */
+
+  subst_assign_varlist = (WORD_LIST *)NULL;
+  vp = lp = tlist;
+
+  /* Separate out variable assignments at the start of the command.
+     Loop invariant: vp->next == lp
+     Loop postcondition:
+	lp = list of words left after assignment statements skipped
+	tlist = original list of words
+  */
+  while (lp && (lp->word->flags & W_ASSIGNMENT))
+    {
+      vp = lp;
+      lp = lp->next;
+    }
+
+  /* If lp != tlist, we have some initial assignment statements.
+     We make SUBST_ASSIGN_VARLIST point to the list of assignment
+     words and TLIST point to the remaining words.  */
+  if (lp != tlist)
+    {
+      subst_assign_varlist = tlist;
+      /* ASSERT(vp->next == lp); */
+      vp->next = (WORD_LIST *)NULL;	/* terminate variable list */
+      tlist = lp;			/* remainder of word list */
+    }
+
+  /* vp == end of variable list */
+  /* tlist == remainder of original word list without variable assignments */
+  if (!tlist)
+    /* All the words in tlist were assignment statements */
+    return ((WORD_LIST *)NULL);
+
+  /* ASSERT(tlist != NULL); */
+  /* ASSERT((tlist->word->flags & W_ASSIGNMENT) == 0); */
+
+  /* If the -k option is in effect, we need to go through the remaining
+     words, separate out the assignment words, and place them on
+     SUBST_ASSIGN_VARLIST. */
+  if (place_keywords_in_env)
+    {
+      WORD_LIST *tp;	/* tp == running pointer into tlist */
+
+      tp = tlist;
+      lp = tlist->next;
+
+      /* Loop Invariant: tp->next == lp */
+      /* Loop postcondition: tlist == word list without assignment statements */
+      while (lp)
+	{
+	  if (lp->word->flags & W_ASSIGNMENT)
+	    {
+	      /* Found an assignment statement, add this word to end of
+		 subst_assign_varlist (vp). */
+	      if (!subst_assign_varlist)
+		subst_assign_varlist = vp = lp;
+	      else
+		{
+		  vp->next = lp;
+		  vp = lp;
+		}
+
+	      /* Remove the word pointed to by LP from TLIST. */
+	      tp->next = lp->next;
+	      /* ASSERT(vp == lp); */
+	      lp->next = (WORD_LIST *)NULL;
+	      lp = tp->next;
+	    }
+	  else
+	    {
+	      tp = lp;
+	      lp = lp->next;
+	    }
+	}
+    }
+  return (tlist);
+}
+
+#define WEXP_VARASSIGN	0x001
+#define WEXP_BRACEEXP	0x002
+#define WEXP_TILDEEXP	0x004
+#define WEXP_PARAMEXP	0x008
+#define WEXP_PATHEXP	0x010
+
+/* All of the expansions, including variable assignments at the start of
+   the list. */
+#define WEXP_ALL	(WEXP_VARASSIGN|WEXP_BRACEEXP|WEXP_TILDEEXP|WEXP_PARAMEXP|WEXP_PATHEXP)
+
+/* All of the expansions except variable assignments at the start of
+   the list. */
+#define WEXP_NOVARS	(WEXP_BRACEEXP|WEXP_TILDEEXP|WEXP_PARAMEXP|WEXP_PATHEXP)
+
+/* All of the `shell expansions': brace expansion, tilde expansion, parameter
+   expansion, command substitution, arithmetic expansion, word splitting, and
+   quote removal. */
+#define WEXP_SHELLEXP	(WEXP_BRACEEXP|WEXP_TILDEEXP|WEXP_PARAMEXP)
+
+/* Take the list of words in LIST and do the various substitutions.  Return
+   a new list of words which is the expanded list, and without things like
+   variable assignments. */
+
+WORD_LIST *
+expand_words (list)
+     WORD_LIST *list;
+{
+  return (expand_word_list_internal (list, WEXP_ALL));
+}
+
+/* Same as expand_words (), but doesn't hack variable or environment
+   variables. */
+WORD_LIST *
+expand_words_no_vars (list)
+     WORD_LIST *list;
+{
+  return (expand_word_list_internal (list, WEXP_NOVARS));
+}
+
+WORD_LIST *
+expand_words_shellexp (list)
+     WORD_LIST *list;
+{
+  return (expand_word_list_internal (list, WEXP_SHELLEXP));
+}
+
+static WORD_LIST *
+glob_expand_word_list (tlist, eflags)
+     WORD_LIST *tlist;
+     int eflags;
+{
+  char **glob_array, *temp_string;
+  register int glob_index;
+  WORD_LIST *glob_list, *output_list, *disposables, *next;
+  WORD_DESC *tword;
+  int x;
+
+  output_list = disposables = (WORD_LIST *)NULL;
+  glob_array = (char **)NULL;
+  while (tlist)
+    {
+      /* For each word, either globbing is attempted or the word is
+	 added to orig_list.  If globbing succeeds, the results are
+	 added to orig_list and the word (tlist) is added to the list
+	 of disposable words.  If globbing fails and failed glob
+	 expansions are left unchanged (the shell default), the
+	 original word is added to orig_list.  If globbing fails and
+	 failed glob expansions are removed, the original word is
+	 added to the list of disposable words.  orig_list ends up
+	 in reverse order and requires a call to REVERSE_LIST to
+	 be set right.  After all words are examined, the disposable
+	 words are freed. */
+      next = tlist->next;
+
+      /* If the word isn't an assignment and contains an unquoted
+	 pattern matching character, then glob it. */
+      if ((tlist->word->flags & W_NOGLOB) == 0 &&
+	  unquoted_glob_pattern_p (tlist->word->word))
+	{
+	  glob_array = shell_glob_filename (tlist->word->word, QGLOB_CTLESC);	/* XXX */
+
+	  /* Handle error cases.
+	     I don't think we should report errors like "No such file
+	     or directory".  However, I would like to report errors
+	     like "Read failed". */
+
+	  if (glob_array == 0 || GLOB_FAILED (glob_array))
+	    {
+	      glob_array = (char **)xmalloc (sizeof (char *));
+	      glob_array[0] = (char *)NULL;
+	    }
+
+	  /* Dequote the current word in case we have to use it. */
+	  if (glob_array[0] == NULL)
+	    {
+	      temp_string = dequote_string (tlist->word->word);
+	      free (tlist->word->word);
+	      tlist->word->word = temp_string;
+	    }
+
+	  /* Make the array into a word list. */
+	  glob_list = (WORD_LIST *)NULL;
+	  for (glob_index = 0; glob_array[glob_index]; glob_index++)
+	    {
+	      tword = make_bare_word (glob_array[glob_index]);
+	      glob_list = make_word_list (tword, glob_list);
+	    }
+
+	  if (glob_list)
+	    {
+	      output_list = (WORD_LIST *)list_append (glob_list, output_list);
+	      PREPEND_LIST (tlist, disposables);
+	    }
+	  else if (fail_glob_expansion != 0)
+	    {
+	      last_command_exit_value = EXECUTION_FAILURE;
+	      report_error (_("no match: %s"), tlist->word->word);
+	      exp_jump_to_top_level (DISCARD);
+	    }
+	  else if (allow_null_glob_expansion == 0)
+	    {
+	      /* Failed glob expressions are left unchanged. */
+	      PREPEND_LIST (tlist, output_list);
+	    }
+	  else
+	    {
+	      /* Failed glob expressions are removed. */
+	      PREPEND_LIST (tlist, disposables);
+	    }
+	}
+      else
+	{
+	  /* Dequote the string. */
+	  temp_string = dequote_string (tlist->word->word);
+	  free (tlist->word->word);
+	  tlist->word->word = temp_string;
+	  PREPEND_LIST (tlist, output_list);
+	}
+
+      strvec_dispose (glob_array);
+      glob_array = (char **)NULL;
+
+      tlist = next;
+    }
+
+  if (disposables)
+    dispose_words (disposables);
+
+  if (output_list)
+    output_list = REVERSE_LIST (output_list, WORD_LIST *);
+
+  return (output_list);
+}
+
+#if defined (BRACE_EXPANSION)
+static WORD_LIST *
+brace_expand_word_list (tlist, eflags)
+     WORD_LIST *tlist;
+     int eflags;
+{
+  register char **expansions;
+  char *temp_string;
+  WORD_LIST *disposables, *output_list, *next;
+  WORD_DESC *w;
+  int eindex;
+
+  for (disposables = output_list = (WORD_LIST *)NULL; tlist; tlist = next)
+    {
+      next = tlist->next;
+
+      if (tlist->word->flags & W_NOBRACE)
+        {
+/*itrace("brace_expand_word_list: %s: W_NOBRACE", tlist->word->word);*/
+	  PREPEND_LIST (tlist, output_list);
+	  continue;
+        }
+
+      if ((tlist->word->flags & (W_COMPASSIGN|W_ASSIGNARG)) == (W_COMPASSIGN|W_ASSIGNARG))
+        {
+/*itrace("brace_expand_word_list: %s: W_COMPASSIGN|W_ASSIGNARG", tlist->word->word);*/
+	  PREPEND_LIST (tlist, output_list);
+	  continue;
+        }
+
+      /* Only do brace expansion if the word has a brace character.  If
+	 not, just add the word list element to BRACES and continue.  In
+	 the common case, at least when running shell scripts, this will
+	 degenerate to a bunch of calls to `mbschr', and then what is
+	 basically a reversal of TLIST into BRACES, which is corrected
+	 by a call to REVERSE_LIST () on BRACES when the end of TLIST
+	 is reached. */
+      if (mbschr (tlist->word->word, LBRACE))
+	{
+	  expansions = brace_expand (tlist->word->word);
+
+	  for (eindex = 0; temp_string = expansions[eindex]; eindex++)
+	    {
+	      w = alloc_word_desc ();
+	      w->word = temp_string;
+
+	      /* If brace expansion didn't change the word, preserve
+		 the flags.  We may want to preserve the flags
+		 unconditionally someday -- XXX */
+	      if (STREQ (temp_string, tlist->word->word))
+		w->flags = tlist->word->flags;
+	      else
+		w = make_word_flags (w, temp_string);
+
+	      output_list = make_word_list (w, output_list);
+	    }
+	  free (expansions);
+
+	  /* Add TLIST to the list of words to be freed after brace
+	     expansion has been performed. */
+	  PREPEND_LIST (tlist, disposables);
+	}
+      else
+	PREPEND_LIST (tlist, output_list);
+    }
+
+  if (disposables)
+    dispose_words (disposables);
+
+  if (output_list)
+    output_list = REVERSE_LIST (output_list, WORD_LIST *);
+
+  return (output_list);
+}
+#endif
+
+#if defined (ARRAY_VARS)
+/* Take WORD, a compound array assignment, and internally run (for example),
+   'declare -A w', where W is the variable name portion of WORD. OPTION is
+   the list of options to supply to `declare'. CMD is the declaration command
+   we are expanding right now; it's unused currently. */
+static int
+make_internal_declare (word, option, cmd)
+     char *word;
+     char *option;
+     char *cmd;
+{
+  int t, r;
+  WORD_LIST *wl;
+  WORD_DESC *w;
+
+  w = make_word (word);
+
+  t = assignment (w->word, 0);
+  if (w->word[t] == '=')
+    {
+      w->word[t] = '\0';
+      if (w->word[t - 1] == '+')	/* cut off any append op */
+	w->word[t - 1] = '\0';
+    }
+
+  wl = make_word_list (w, (WORD_LIST *)NULL);
+  wl = make_word_list (make_word (option), wl);
+
+  r = declare_builtin (wl);
+
+  dispose_words (wl);
+  return r;
+}  
+
+/* Expand VALUE in NAME[+]=( VALUE ) to a list of words. FLAGS is 1 if NAME
+   is an associative array.
+
+   If we are  processing an indexed array, expand_compound_array_assignment
+   will expand all the individual words and quote_compound_array_list will
+   single-quote them. If we are processing an associative array, we use
+   parse_string_to_word_list to split VALUE into a list of words instead of
+   faking up a shell variable and calling expand_compound_array_assignment.
+   expand_and_quote_assoc_word expands and single-quotes each word in VALUE
+   together so we don't have problems finding the end of the subscript when
+   quoting it.
+
+   Words in VALUE can be individual words, which are expanded and single-quoted,
+   or words of the form [IND]=VALUE, which end up as explained below, as
+   ['expanded-ind']='expanded-value'. */
+
+static WORD_LIST *
+expand_oneword (value, flags)
+     char *value;
+     int flags;
+{
+  WORD_LIST *l, *nl;
+  char *t;
+  
+  if (flags == 0)
+    {
+      /* Indexed array */
+      l = expand_compound_array_assignment ((SHELL_VAR *)NULL, value, flags);
+      /* Now we quote the results of the expansion above to prevent double
+	 expansion. */
+      quote_compound_array_list (l, flags);
+      return l;
+    }
+  else
+    {
+      /* Associative array */
+      l = parse_string_to_word_list (value, 1, "array assign");
+      /* For associative arrays, with their arbitrary subscripts, we have to
+	 expand and quote in one step so we don't have to search for the
+	 closing right bracket more than once. */
+      for (nl = l; nl; nl = nl->next)
+	{
+	  if ((nl->word->flags & W_ASSIGNMENT) == 0)
+	    t = sh_single_quote (nl->word->word ? nl->word->word : "");
+	  else
+	    t = expand_and_quote_assoc_word (nl->word->word, flags);
+	  free (nl->word->word);
+	  nl->word->word = t;
+	}
+      return l;
+    }
+}
+
+/* Expand a single compound assignment argument to a declaration builtin.
+   This word takes the form NAME[+]=( VALUE ). The NAME[+]= is passed through
+   unchanged. The VALUE is expanded and each word in the result is single-
+   quoted. Words of the form [key]=value end up as
+   ['expanded-key']='expanded-value'. Associative arrays have special
+   handling, see expand_oneword() above. The return value is
+   NAME[+]=( expanded-and-quoted-VALUE ). */
+static void
+expand_compound_assignment_word (tlist, flags)
+     WORD_LIST *tlist;
+     int flags;
+{
+  WORD_LIST *l;
+  int wlen, oind, t;
+  char *value, *temp;
+
+/*itrace("expand_compound_assignment_word: original word = -%s-", tlist->word->word);*/
+  t = assignment (tlist->word->word, 0);
+
+  /* value doesn't have the open and close parens */
+  oind = 1;
+  value = extract_array_assignment_list (tlist->word->word + t + 1, &oind);
+  /* This performs one round of expansion on the index/key and value and
+     single-quotes each word in the result. */
+  l = expand_oneword (value, flags);
+  free (value);
+
+  value = string_list (l);
+  wlen = STRLEN (value);
+
+  /* Now, let's rebuild the string */
+  temp = xmalloc (t + 3 + wlen + 1);	/* name[+]=(value) */
+  memcpy (temp, tlist->word->word, ++t);
+  temp[t++] = '(';
+  if (value)
+    memcpy (temp + t, value, wlen);
+  t += wlen;
+  temp[t++] = ')';
+  temp[t] = '\0';
+/*itrace("expand_compound_assignment_word: reconstructed word = -%s-", temp);*/
+
+  free (tlist->word->word);
+  tlist->word->word = temp;
+
+  free (value);
+}
+
+/* Expand and process an argument to a declaration command. We have already
+   set flags in TLIST->word->flags depending on the declaration command
+   (declare, local, etc.) and the options supplied to it (-a, -A, etc.).
+   TLIST->word->word is of the form NAME[+]=( VALUE ).   
+
+   This does several things, all using pieces of other functions to get the
+   evaluation sequence right. It's called for compound array assignments with
+   the W_ASSIGNMENT flag set (basically, valid identifier names on the lhs).
+   It parses out which flags need to be set for declare to create the variable
+   correctly, then calls declare internally (make_internal_declare) to make
+   sure the variable exists with the correct attributes. Before the variable
+   is created, it calls expand_compound_assignment_word to expand VALUE to a
+   list of words, appropriately quoted for further evaluation. This preserves
+   the semantics of word-expansion-before-calling-builtins. Finally, it calls
+   do_word_assignment to perform the expansion and assignment with the same
+   expansion semantics as a standalone assignment statement (no word splitting,
+   etc.) even though the word is single-quoted so all that needs to happen is
+   quote removal. */
+static WORD_LIST *
+expand_declaration_argument (tlist, wcmd)
+     WORD_LIST *tlist, *wcmd;
+{
+  char opts[16], omap[128];
+  int t, opti, oind, skip, inheriting;
+  WORD_LIST *l;
+
+  inheriting = localvar_inherit;
+  opti = 0;
+  if (tlist->word->flags & (W_ASSIGNASSOC|W_ASSNGLOBAL|W_CHKLOCAL|W_ASSIGNARRAY))
+    opts[opti++] = '-';
+
+  if ((tlist->word->flags & (W_ASSIGNASSOC|W_ASSNGLOBAL)) == (W_ASSIGNASSOC|W_ASSNGLOBAL))
+    {
+      opts[opti++] = 'g';
+      opts[opti++] = 'A';
+    }
+  else if (tlist->word->flags & W_ASSIGNASSOC)
+    {
+      opts[opti++] = 'A';
+    }
+  else if ((tlist->word->flags & (W_ASSIGNARRAY|W_ASSNGLOBAL)) == (W_ASSIGNARRAY|W_ASSNGLOBAL))
+    {
+      opts[opti++] = 'g';
+      opts[opti++] = 'a';
+    }
+  else if (tlist->word->flags & W_ASSIGNARRAY)
+    {
+      opts[opti++] = 'a';
+    }
+  else if (tlist->word->flags & W_ASSNGLOBAL)
+    opts[opti++] = 'g';
+
+  if (tlist->word->flags & W_CHKLOCAL)
+    opts[opti++] = 'G';
+
+  /* If we have special handling note the integer attribute and others
+     that transform the value upon assignment.  What we do is take all
+     of the option arguments and scan through them looking for options
+     that cause such transformations, and add them to the `opts' array. */
+
+  memset (omap, '\0', sizeof (omap));
+  for (l = wcmd->next; l != tlist; l = l->next)
+    {
+      if (l->word->word[0] != '-')
+	break;	/* non-option argument */
+      if (l->word->word[0] == '-' && l->word->word[1] == '-' && l->word->word[2] == 0)
+	break;	/* -- signals end of options */
+      for (oind = 1; l->word->word[oind]; oind++)
+	switch (l->word->word[oind])
+	  {
+	    case 'I':
+	      inheriting = 1;
+	    case 'i':
+	    case 'l':
+	    case 'u':
+	    case 'c':
+	      omap[l->word->word[oind]] = 1;
+	      if (opti == 0)
+		opts[opti++] = '-';
+	      break;
+	    default:
+	      break;
+	  }
+    }
+
+  for (oind = 0; oind < sizeof (omap); oind++)
+    if (omap[oind])
+      opts[opti++] = oind;
+
+  /* If there are no -a/-A options, but we have a compound assignment,
+     we have a choice: we can set opts[0]='-', opts[1]='a', since the
+     default is to create an indexed array, and call
+     make_internal_declare with that, or we can just skip the -a and let
+     declare_builtin deal with it.  Once we're here, we're better set
+     up for the latter, since we don't want to deal with looking up
+     any existing variable here -- better to let declare_builtin do it.
+     We need the variable created, though, especially if it's local, so
+     we get the scoping right before we call do_word_assignment.
+     To ensure that make_local_declare gets called, we add `--' if there
+     aren't any options. */
+  if ((tlist->word->flags & (W_ASSIGNASSOC|W_ASSIGNARRAY)) == 0)
+    {
+      if (opti == 0)
+	{
+	  opts[opti++] = '-';
+          opts[opti++] = '-';
+	}
+    }
+  opts[opti] = '\0';
+
+  /* This isn't perfect, but it's a start. Improvements later. We expand
+     tlist->word->word and single-quote the results to avoid multiple
+     expansions by, say, do_assignment_internal(). We have to weigh the
+     cost of reconstructing the compound assignment string with its single
+     quoting and letting the declare builtin handle it. The single quotes
+     will prevent any unwanted additional expansion or word splitting. */
+  expand_compound_assignment_word (tlist, (tlist->word->flags & W_ASSIGNASSOC) ? 1 : 0);
+
+  skip = 0;
+  if (opti > 0)
+    {
+      t = make_internal_declare (tlist->word->word, opts, wcmd ? wcmd->word->word : (char *)0);
+      if (t != EXECUTION_SUCCESS)
+	{
+	  last_command_exit_value = t;
+	  if (tlist->word->flags & W_FORCELOCAL)	/* non-fatal error */
+	    skip = 1;
+	  else
+	    exp_jump_to_top_level (DISCARD);
+	}
+    }
+
+  if (skip == 0)
+    {
+      t = do_word_assignment (tlist->word, 0);
+      if (t == 0)
+	{
+	  last_command_exit_value = EXECUTION_FAILURE;
+	  exp_jump_to_top_level (DISCARD);
+	}
+    }
+
+  /* Now transform the word as ksh93 appears to do and go on */
+  t = assignment (tlist->word->word, 0);
+  tlist->word->word[t] = '\0';
+  if (tlist->word->word[t - 1] == '+')
+    tlist->word->word[t - 1] = '\0';	/* cut off append op */
+  tlist->word->flags &= ~(W_ASSIGNMENT|W_NOSPLIT|W_COMPASSIGN|W_ASSIGNARG|W_ASSIGNASSOC|W_ASSIGNARRAY);
+
+  return (tlist);
+}
+#endif /* ARRAY_VARS */
+
+static WORD_LIST *
+shell_expand_word_list (tlist, eflags)
+     WORD_LIST *tlist;
+     int eflags;
+{
+  WORD_LIST *expanded, *orig_list, *new_list, *next, *temp_list, *wcmd;
+  int expanded_something, has_dollar_at;
+
+  /* We do tilde expansion all the time.  This is what 1003.2 says. */
+  wcmd = new_list = (WORD_LIST *)NULL;
+
+  for (orig_list = tlist; tlist; tlist = next)
+    {
+      if (wcmd == 0 && (tlist->word->flags & W_ASSNBLTIN))
+	wcmd = tlist;
+	
+      next = tlist->next;
+
+#if defined (ARRAY_VARS)
+      /* If this is a compound array assignment to a builtin that accepts
+         such assignments (e.g., `declare'), take the assignment and perform
+         it separately, handling the semantics of declarations inside shell
+         functions.  This avoids the double-evaluation of such arguments,
+         because `declare' does some evaluation of compound assignments on
+         its own. */
+      if ((tlist->word->flags & (W_COMPASSIGN|W_ASSIGNARG)) == (W_COMPASSIGN|W_ASSIGNARG))
+	expand_declaration_argument (tlist, wcmd);
+#endif
+
+      expanded_something = 0;
+      expanded = expand_word_internal
+	(tlist->word, 0, 0, &has_dollar_at, &expanded_something);
+
+      if (expanded == &expand_word_error || expanded == &expand_word_fatal)
+	{
+	  /* By convention, each time this error is returned,
+	     tlist->word->word has already been freed. */
+	  tlist->word->word = (char *)NULL;
+
+	  /* Dispose our copy of the original list. */
+	  dispose_words (orig_list);
+	  /* Dispose the new list we're building. */
+	  dispose_words (new_list);
+
+	  last_command_exit_value = EXECUTION_FAILURE;
+	  if (expanded == &expand_word_error)
+	    exp_jump_to_top_level (DISCARD);
+	  else
+	    exp_jump_to_top_level (FORCE_EOF);
+	}
+
+      /* Don't split words marked W_NOSPLIT. */
+      if (expanded_something && (tlist->word->flags & W_NOSPLIT) == 0)
+	{
+	  temp_list = word_list_split (expanded);
+	  dispose_words (expanded);
+	}
+      else
+	{
+	  /* If no parameter expansion, command substitution, process
+	     substitution, or arithmetic substitution took place, then
+	     do not do word splitting.  We still have to remove quoted
+	     null characters from the result. */
+	  word_list_remove_quoted_nulls (expanded);
+	  temp_list = expanded;
+	}
+
+      expanded = REVERSE_LIST (temp_list, WORD_LIST *);
+      new_list = (WORD_LIST *)list_append (expanded, new_list);
+    }
+
+  if (orig_list)  
+    dispose_words (orig_list);
+
+  if (new_list)
+    new_list = REVERSE_LIST (new_list, WORD_LIST *);
+
+  return (new_list);
+}
+
+/* The workhorse for expand_words () and expand_words_no_vars ().
+   First arg is LIST, a WORD_LIST of words.
+   Second arg EFLAGS is a flags word controlling which expansions are
+   performed.
+
+   This does all of the substitutions: brace expansion, tilde expansion,
+   parameter expansion, command substitution, arithmetic expansion,
+   process substitution, word splitting, and pathname expansion, according
+   to the bits set in EFLAGS.  Words with the W_QUOTED or W_NOSPLIT bits
+   set, or for which no expansion is done, do not undergo word splitting.
+   Words with the W_NOGLOB bit set do not undergo pathname expansion; words
+   with W_NOBRACE set do not undergo brace expansion (see
+   brace_expand_word_list above). */
+static WORD_LIST *
+expand_word_list_internal (list, eflags)
+     WORD_LIST *list;
+     int eflags;
+{
+  WORD_LIST *new_list, *temp_list;
+  int tint;
+  char *savecmd;
+
+  tempenv_assign_error = 0;
+  if (list == 0)
+    return ((WORD_LIST *)NULL);
+
+  garglist = new_list = copy_word_list (list);
+  if (eflags & WEXP_VARASSIGN)
+    {
+      garglist = new_list = separate_out_assignments (new_list);
+      if (new_list == 0)
+	{
+	  if (subst_assign_varlist)
+	    {
+	      /* All the words were variable assignments, so they are placed
+		 into the shell's environment. */
+	      for (temp_list = subst_assign_varlist; temp_list; temp_list = temp_list->next)
+		{
+		  savecmd = this_command_name;
+		  this_command_name = (char *)NULL;	/* no arithmetic errors */
+		  tint = do_word_assignment (temp_list->word, 0);
+		  this_command_name = savecmd;
+		  /* Variable assignment errors in non-interactive shells
+		     running in Posix.2 mode cause the shell to exit, unless
+		     they are being run by the `command' builtin. */
+		  if (tint == 0)
+		    {
+		      last_command_exit_value = EXECUTION_FAILURE;
+		      if (interactive_shell == 0 && posixly_correct && executing_command_builtin == 0)
+			exp_jump_to_top_level (FORCE_EOF);
+		      else
+			exp_jump_to_top_level (DISCARD);
+		    }
+		}
+	      dispose_words (subst_assign_varlist);
+	      subst_assign_varlist = (WORD_LIST *)NULL;
+	    }
+	  return ((WORD_LIST *)NULL);
+	}
+    }
+
+  /* Begin expanding the words that remain.  The expansions take place on
+     things that aren't really variable assignments. */
+
+#if defined (BRACE_EXPANSION)
+  /* Do brace expansion on this word if there are any brace characters
+     in the string. */
+  if ((eflags & WEXP_BRACEEXP) && brace_expansion && new_list)
+    new_list = brace_expand_word_list (new_list, eflags);
+#endif /* BRACE_EXPANSION */
+
+  /* Perform the `normal' shell expansions: tilde expansion, parameter and
+     variable substitution, command substitution, arithmetic expansion,
+     and word splitting. */
+  new_list = shell_expand_word_list (new_list, eflags);
+
+  /* Okay, we're almost done.  Now let's just do some filename
+     globbing. */
+  if (new_list)
+    {
+      if ((eflags & WEXP_PATHEXP) && disallow_filename_globbing == 0)
+	/* Glob expand the word list unless globbing has been disabled. */
+	new_list = glob_expand_word_list (new_list, eflags);
+      else
+	/* Dequote the words, because we're not performing globbing. */
+	new_list = dequote_list (new_list);
+    }
+
+  if ((eflags & WEXP_VARASSIGN) && subst_assign_varlist)
+    {
+      sh_wassign_func_t *assign_func;
+      int is_special_builtin, is_builtin_or_func;
+
+      /* If the remainder of the words expand to nothing, Posix.2 requires
+	 that the variable and environment assignments affect the shell's
+	 environment. */
+      assign_func = new_list ? assign_in_env : do_word_assignment;
+      tempenv_assign_error = 0;
+
+      is_builtin_or_func = (new_list && new_list->word && (find_shell_builtin (new_list->word->word) || find_function (new_list->word->word)));
+      /* Posix says that special builtins exit if a variable assignment error
+	 occurs in an assignment preceding it. */
+      is_special_builtin = (posixly_correct && new_list && new_list->word && find_special_builtin (new_list->word->word));
+      
+      for (temp_list = subst_assign_varlist; temp_list; temp_list = temp_list->next)
+	{
+	  savecmd = this_command_name;
+	  this_command_name = (char *)NULL;
+	  assigning_in_environment = (assign_func == assign_in_env);
+	  tint = (*assign_func) (temp_list->word, is_builtin_or_func);
+	  assigning_in_environment = 0;
+	  this_command_name = savecmd;
+	  /* Variable assignment errors in non-interactive shells running
+	     in Posix.2 mode cause the shell to exit. */
+	  if (tint == 0)
+	    {
+	      if (assign_func == do_word_assignment)
+		{
+		  last_command_exit_value = EXECUTION_FAILURE;
+		  if (interactive_shell == 0 && posixly_correct)
+		    exp_jump_to_top_level (FORCE_EOF);
+		  else
+		    exp_jump_to_top_level (DISCARD);
+		}
+	      else if (interactive_shell == 0 && is_special_builtin)
+		{
+		  last_command_exit_value = EXECUTION_FAILURE;
+		  exp_jump_to_top_level (FORCE_EOF);
+		}
+	      else
+		tempenv_assign_error++;
+	    }
+	}
+
+      dispose_words (subst_assign_varlist);
+      subst_assign_varlist = (WORD_LIST *)NULL;
+    }
+
+  return (new_list);
+}
diff --git a/subst.h b/subst.h
new file mode 100644
index 0000000..1347651
--- /dev/null
+++ b/subst.h
@@ -0,0 +1,354 @@
+/* subst.h -- Names of externally visible functions in subst.c. */
+
+/* Copyright (C) 1993-2017 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_SUBST_H_)
+#define _SUBST_H_
+
+#include "stdc.h"
+
+/* Constants which specify how to handle backslashes and quoting in
+   expand_word_internal ().  Q_DOUBLE_QUOTES means to use the function
+   slashify_in_quotes () to decide whether the backslash should be
+   retained.  Q_HERE_DOCUMENT means slashify_in_here_document () to
+   decide whether to retain the backslash.  Q_KEEP_BACKSLASH means
+   to unconditionally retain the backslash.  Q_PATQUOTE means that we're
+   expanding a pattern ${var%#[#%]pattern} in an expansion surrounded
+   by double quotes. Q_DOLBRACE means we are expanding a ${...} word, so
+   backslashes should also escape { and } and be removed. */
+#define Q_DOUBLE_QUOTES  0x001
+#define Q_HERE_DOCUMENT  0x002
+#define Q_KEEP_BACKSLASH 0x004
+#define Q_PATQUOTE	 0x008
+#define Q_QUOTED	 0x010
+#define Q_ADDEDQUOTES	 0x020
+#define Q_QUOTEDNULL	 0x040
+#define Q_DOLBRACE	 0x080
+#define Q_ARITH		 0x100	/* expanding string for arithmetic evaluation */
+#define Q_ARRAYSUB	 0x200	/* expanding indexed array subscript */
+
+/* Flag values controlling how assignment statements are treated. */
+#define ASS_APPEND	0x0001
+#define ASS_MKLOCAL	0x0002
+#define ASS_MKASSOC	0x0004
+#define ASS_MKGLOBAL	0x0008	/* force global assignment */
+#define ASS_NAMEREF	0x0010	/* assigning to nameref variable */
+#define ASS_FORCE	0x0020	/* force assignment even to readonly variable */
+#define ASS_CHKLOCAL	0x0040	/* check local variable before assignment */
+#define ASS_NOEXPAND	0x0080	/* don't expand associative array subscripts */
+#define ASS_NOEVAL	0x0100	/* don't evaluate value as expression */
+#define ASS_NOLONGJMP	0x0200	/* don't longjmp on fatal assignment error */
+#define ASS_NOINVIS	0x0400	/* don't resolve local invisible variables */
+
+/* Flags for the string extraction functions. */
+#define SX_NOALLOC	0x0001	/* just skip; don't return substring */
+#define SX_VARNAME	0x0002	/* variable name; for string_extract () */
+#define SX_REQMATCH	0x0004	/* closing/matching delimiter required */
+#define SX_COMMAND	0x0008	/* extracting a shell script/command */
+#define SX_NOCTLESC	0x0010	/* don't honor CTLESC quoting */
+#define SX_NOESCCTLNUL	0x0020	/* don't let CTLESC quote CTLNUL */
+#define SX_NOLONGJMP	0x0040	/* don't longjmp on fatal error */
+#define SX_ARITHSUB	0x0080	/* extracting $(( ... )) (currently unused) */
+#define SX_POSIXEXP	0x0100	/* extracting new Posix pattern removal expansions in extract_dollar_brace_string */
+#define SX_WORD		0x0200	/* extracting word in ${param op word} */
+#define SX_COMPLETE	0x0400	/* extracting word for completion */
+#define SX_STRIPDQ	0x0800	/* strip double quotes when extracting double-quoted string */
+
+/* Remove backslashes which are quoting backquotes from STRING.  Modifies
+   STRING, and returns a pointer to it. */
+extern char * de_backslash PARAMS((char *));
+
+/* Replace instances of \! in a string with !. */
+extern void unquote_bang PARAMS((char *));
+
+/* Extract the $( construct in STRING, and return a new string.
+   Start extracting at (SINDEX) as if we had just seen "$(".
+   Make (SINDEX) get the position just after the matching ")".
+   XFLAGS is additional flags to pass to other extraction functions, */
+extern char *extract_command_subst PARAMS((char *, int *, int));
+
+/* Extract the $[ construct in STRING, and return a new string.
+   Start extracting at (SINDEX) as if we had just seen "$[".
+   Make (SINDEX) get the position just after the matching "]". */
+extern char *extract_arithmetic_subst PARAMS((char *, int *));
+
+#if defined (PROCESS_SUBSTITUTION)
+/* Extract the <( or >( construct in STRING, and return a new string.
+   Start extracting at (SINDEX) as if we had just seen "<(".
+   Make (SINDEX) get the position just after the matching ")". */
+extern char *extract_process_subst PARAMS((char *, char *, int *, int));
+#endif /* PROCESS_SUBSTITUTION */
+
+/* Extract the name of the variable to bind to from the assignment string. */
+extern char *assignment_name PARAMS((char *));
+
+/* Return a single string of all the words present in LIST, separating
+   each word with SEP. */
+extern char *string_list_internal PARAMS((WORD_LIST *, char *));
+
+/* Return a single string of all the words present in LIST, separating
+   each word with a space. */
+extern char *string_list PARAMS((WORD_LIST *));
+
+/* Turn $* into a single string, obeying POSIX rules. */
+extern char *string_list_dollar_star PARAMS((WORD_LIST *, int, int));
+
+/* Expand $@ into a single string, obeying POSIX rules. */
+extern char *string_list_dollar_at PARAMS((WORD_LIST *, int, int));
+
+/* Turn the positional parameters into a string, understanding quoting and
+   the various subtleties of using the first character of $IFS as the
+   separator.  Calls string_list_dollar_at, string_list_dollar_star, and
+   string_list as appropriate. */
+extern char *string_list_pos_params PARAMS((int, WORD_LIST *, int, int));
+
+/* Perform quoted null character removal on each element of LIST.
+   This modifies LIST. */
+extern void word_list_remove_quoted_nulls PARAMS((WORD_LIST *));
+
+/* This performs word splitting and quoted null character removal on
+   STRING. */
+extern WORD_LIST *list_string PARAMS((char *, char *, int));
+
+extern char *ifs_firstchar  PARAMS((int *));
+extern char *get_word_from_string PARAMS((char **, char *, char **));
+extern char *strip_trailing_ifs_whitespace PARAMS((char *, char *, int));
+
+/* Given STRING, an assignment string, get the value of the right side
+   of the `=', and bind it to the left side.  If EXPAND is true, then
+   perform tilde expansion, parameter expansion, command substitution,
+   and arithmetic expansion on the right-hand side.  Do not perform word
+   splitting on the result of expansion. */
+extern int do_assignment PARAMS((char *));
+extern int do_assignment_no_expand PARAMS((char *));
+extern int do_word_assignment PARAMS((WORD_DESC *, int));
+
+/* Append SOURCE to TARGET at INDEX.  SIZE is the current amount
+   of space allocated to TARGET.  SOURCE can be NULL, in which
+   case nothing happens.  Gets rid of SOURCE by free ()ing it.
+   Returns TARGET in case the location has changed. */
+extern char *sub_append_string PARAMS((char *, char *, int *, size_t *));
+
+/* Append the textual representation of NUMBER to TARGET.
+   INDEX and SIZE are as in SUB_APPEND_STRING. */
+extern char *sub_append_number PARAMS((intmax_t, char *, int *, int *));
+
+/* Return the word list that corresponds to `$*'. */
+extern WORD_LIST *list_rest_of_args PARAMS((void));
+
+/* Make a single large string out of the dollar digit variables,
+   and the rest_of_args.  If DOLLAR_STAR is 1, then obey the special
+   case of "$*" with respect to IFS. */
+extern char *string_rest_of_args PARAMS((int));
+
+/* Expand STRING by performing parameter expansion, command substitution,
+   and arithmetic expansion.  Dequote the resulting WORD_LIST before
+   returning it, but do not perform word splitting.  The call to
+   remove_quoted_nulls () is made here because word splitting normally
+   takes care of quote removal. */
+extern WORD_LIST *expand_string_unsplit PARAMS((char *, int));
+
+/* Expand the rhs of an assignment statement. */
+extern WORD_LIST *expand_string_assignment PARAMS((char *, int));
+
+/* Expand a prompt string. */
+extern WORD_LIST *expand_prompt_string PARAMS((char *, int, int));
+
+/* Expand STRING just as if you were expanding a word.  This also returns
+   a list of words.  Note that filename globbing is *NOT* done for word
+   or string expansion, just when the shell is expanding a command.  This
+   does parameter expansion, command substitution, arithmetic expansion,
+   and word splitting.  Dequote the resultant WORD_LIST before returning. */
+extern WORD_LIST *expand_string PARAMS((char *, int));
+
+/* Convenience functions that expand strings to strings, taking care of
+   converting the WORD_LIST * returned by the expand_string* functions
+   to a string and deallocating the WORD_LIST *. */
+extern char *expand_string_to_string PARAMS((char *, int));
+extern char *expand_string_unsplit_to_string PARAMS((char *, int));
+extern char *expand_assignment_string_to_string PARAMS((char *, int));
+
+/* Expand an arithmetic expression string */
+extern char *expand_arith_string PARAMS((char *, int));
+
+/* De-quote quoted characters in STRING. */
+extern char *dequote_string PARAMS((char *));
+
+/* De-quote CTLESC-escaped CTLESC or CTLNUL characters in STRING. */
+extern char *dequote_escapes PARAMS((const char *));
+
+extern WORD_DESC *dequote_word PARAMS((WORD_DESC *));
+
+/* De-quote quoted characters in each word in LIST. */
+extern WORD_LIST *dequote_list PARAMS((WORD_LIST *));
+
+/* Expand WORD, performing word splitting on the result.  This does
+   parameter expansion, command substitution, arithmetic expansion,
+   word splitting, and quote removal. */
+extern WORD_LIST *expand_word PARAMS((WORD_DESC *, int));
+
+/* Expand WORD, but do not perform word splitting on the result.  This
+   does parameter expansion, command substitution, arithmetic expansion,
+   and quote removal. */
+extern WORD_LIST *expand_word_unsplit PARAMS((WORD_DESC *, int));
+extern WORD_LIST *expand_word_leave_quoted PARAMS((WORD_DESC *, int));
+
+/* Return the value of a positional parameter.  This handles values > 10. */
+extern char *get_dollar_var_value PARAMS((intmax_t));
+
+/* Quote a string to protect it from word splitting. */
+extern char *quote_string PARAMS((char *));
+
+/* Quote escape characters (characters special to internals of expansion)
+   in a string. */
+extern char *quote_escapes PARAMS((const char *));
+
+/* And remove such quoted special characters. */
+extern char *remove_quoted_escapes PARAMS((char *));
+
+/* Remove CTLNUL characters from STRING unless they are quoted with CTLESC. */
+extern char *remove_quoted_nulls PARAMS((char *));
+
+/* Perform quote removal on STRING.  If QUOTED > 0, assume we are obeying the
+   backslash quoting rules for within double quotes. */
+extern char *string_quote_removal PARAMS((char *, int));
+
+/* Perform quote removal on word WORD.  This allocates and returns a new
+   WORD_DESC *. */
+extern WORD_DESC *word_quote_removal PARAMS((WORD_DESC *, int));
+
+/* Perform quote removal on all words in LIST.  If QUOTED is non-zero,
+   the members of the list are treated as if they are surrounded by
+   double quotes.  Return a new list, or NULL if LIST is NULL. */
+extern WORD_LIST *word_list_quote_removal PARAMS((WORD_LIST *, int));
+
+/* Called when IFS is changed to maintain some private variables. */
+extern void setifs PARAMS((SHELL_VAR *));
+
+/* Return the value of $IFS, or " \t\n" if IFS is unset. */
+extern char *getifs PARAMS((void));
+
+/* This splits a single word into a WORD LIST on $IFS, but only if the word
+   is not quoted.  list_string () performs quote removal for us, even if we
+   don't do any splitting. */
+extern WORD_LIST *word_split PARAMS((WORD_DESC *, char *));
+
+/* Take the list of words in LIST and do the various substitutions.  Return
+   a new list of words which is the expanded list, and without things like
+   variable assignments. */
+extern WORD_LIST *expand_words PARAMS((WORD_LIST *));
+
+/* Same as expand_words (), but doesn't hack variable or environment
+   variables. */
+extern WORD_LIST *expand_words_no_vars PARAMS((WORD_LIST *));
+
+/* Perform the `normal shell expansions' on a WORD_LIST.  These are
+   brace expansion, tilde expansion, parameter and variable substitution,
+   command substitution, arithmetic expansion, and word splitting. */
+extern WORD_LIST *expand_words_shellexp PARAMS((WORD_LIST *));
+
+extern WORD_DESC *command_substitute PARAMS((char *, int, int));
+extern char *pat_subst PARAMS((char *, char *, char *, int));
+
+#if defined (PROCESS_SUBSTITUTION)
+extern int fifos_pending PARAMS((void));
+extern int num_fifos PARAMS((void));
+extern void unlink_fifo_list PARAMS((void));
+extern void unlink_all_fifos PARAMS((void));
+extern void unlink_fifo PARAMS((int));
+
+extern void *copy_fifo_list PARAMS((int *));
+extern void close_new_fifos PARAMS((void *, int));
+
+extern void clear_fifo_list PARAMS((void));
+
+extern int find_procsub_child PARAMS((pid_t));
+extern void set_procsub_status PARAMS((int, pid_t, int));
+
+extern void wait_procsubs PARAMS((void));
+extern void reap_procsubs PARAMS((void));
+#endif
+
+extern WORD_LIST *list_string_with_quotes PARAMS((char *));
+
+#if defined (ARRAY_VARS)
+extern char *extract_array_assignment_list PARAMS((char *, int *));
+#endif
+
+#if defined (COND_COMMAND)
+extern char *remove_backslashes PARAMS((char *));
+extern char *cond_expand_word PARAMS((WORD_DESC *, int));
+#endif
+
+/* Flags for skip_to_delim */
+#define SD_NOJMP	0x001	/* don't longjmp on fatal error. */
+#define SD_INVERT	0x002	/* look for chars NOT in passed set */
+#define SD_NOQUOTEDELIM	0x004	/* don't let single or double quotes act as delimiters */
+#define SD_NOSKIPCMD	0x008	/* don't skip over $(, <(, or >( command/process substitution; parse them as commands */
+#define SD_EXTGLOB	0x010	/* skip over extended globbing patterns if appropriate */
+#define SD_IGNOREQUOTE	0x020	/* single and double quotes are not special */
+#define SD_GLOB		0x040	/* skip over glob patterns like bracket expressions */
+#define SD_NOPROCSUB	0x080	/* don't parse process substitutions as commands */
+#define SD_COMPLETE	0x100	/* skip_to_delim during completion */
+#define SD_HISTEXP	0x200	/* skip_to_delim during history expansion */
+#define SD_ARITHEXP	0x400	/* skip_to_delim during arithmetic expansion */
+
+extern int skip_to_delim PARAMS((char *, int, char *, int));
+
+#if defined (BANG_HISTORY)
+extern int skip_to_histexp PARAMS((char *, int, char *, int));
+#endif
+
+#if defined (READLINE)
+extern int char_is_quoted PARAMS((char *, int));
+extern int unclosed_pair PARAMS((char *, int, char *));
+extern WORD_LIST *split_at_delims PARAMS((char *, int, char *, int, int, int *, int *));
+#endif
+
+/* Variables used to keep track of the characters in IFS. */
+extern SHELL_VAR *ifs_var;
+extern char *ifs_value;
+extern unsigned char ifs_cmap[];
+extern int ifs_is_set, ifs_is_null;
+
+#if defined (HANDLE_MULTIBYTE)
+extern unsigned char ifs_firstc[];
+extern size_t ifs_firstc_len;
+#else
+extern unsigned char ifs_firstc;
+#endif
+
+extern int assigning_in_environment;
+extern int expanding_redir;
+extern int inherit_errexit;
+
+extern pid_t last_command_subst_pid;
+
+/* Evaluates to 1 if C is a character in $IFS. */
+#define isifs(c)	(ifs_cmap[(unsigned char)(c)] != 0)
+
+/* How to determine the quoted state of the character C. */
+#define QUOTED_CHAR(c)  ((c) == CTLESC)
+
+/* Is the first character of STRING a quoted NULL character? */
+#define QUOTED_NULL(string) ((string)[0] == CTLNUL && (string)[1] == '\0')
+
+extern void invalidate_cached_quoted_dollar_at PARAMS((void));
+
+#endif /* !_SUBST_H_ */
diff --git a/support/Makefile.in b/support/Makefile.in
new file mode 100644
index 0000000..0289e0a
--- /dev/null
+++ b/support/Makefile.in
@@ -0,0 +1,88 @@
+#
+# Simple Makefile for the support programs.
+#
+# documentation support: man2html
+# testing support: printenv recho zecho xcase
+#
+# bashbug.sh lives here (created by configure), but bashbug is created by
+# the top-level makefile
+#
+# Currently only man2html is built
+#
+# Copyright (C) 1998-2018 Free Software Foundation, Inc.
+
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+#
+# Boilerplate
+#
+topdir = @top_srcdir@
+srcdir = @srcdir@
+VPATH = @srcdir@
+BUILD_DIR = @BUILD_DIR@
+
+RM	= rm -f
+SHELL	= @MAKE_SHELL@
+CC = @CC@
+CC_FOR_BUILD = @CC_FOR_BUILD@
+
+EXEEXT = @EXEEXT@
+
+#
+# Compiler options:
+#
+PROFILE_FLAGS = @PROFILE_FLAGS@
+
+CFLAGS = @CFLAGS@
+CFLAGS_FOR_BUILD = @CFLAGS_FOR_BUILD@
+CPPFLAGS = @CPPFLAGS@
+CPPFLAGS_FOR_BUILD = @CPPFLAGS_FOR_BUILD@
+LOCAL_CFLAGS = @LOCAL_CFLAGS@
+DEFS = @DEFS@
+LOCAL_DEFS = @LOCAL_DEFS@
+
+LIBS = @LIBS@
+LIBS_FOR_BUILD = ${LIBS}		# XXX
+
+LOCAL_LDFLAGS = @LOCAL_LDFLAGS@
+LDFLAGS = @LDFLAGS@ $(LOCAL_LDFLAGS) $(CFLAGS)
+LDFLAGS_FOR_BUILD = @LDFLAGS_FOR_BUILD@ $(LOCAL_LDFLAGS) $(CFLAGS_FOR_BUILD)
+
+INCLUDES = -I${BUILD_DIR} -I${topdir}
+
+BASE_CCFLAGS = ${PROFILE_FLAGS} $(DEFS) $(LOCAL_DEFS) $(SYSTEM_FLAGS) \
+	  ${INCLUDES} $(LOCAL_CFLAGS)
+
+CCFLAGS = $(BASE_CCFLAGS) $(CPPFLAGS) $(CFLAGS)
+CCFLAGS_FOR_BUILD = $(BASE_CCFLAGS) $(CPPFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD)
+
+SRC1 =	man2html.c
+OBJ1 =	man2html.o
+
+.c.o:
+	$(RM) $@
+	$(CC_FOR_BUILD) -c $(CCFLAGS_FOR_BUILD) $<
+
+all: man2html$(EXEEXT)
+
+man2html$(EXEEXT): $(OBJ1)
+	$(CC_FOR_BUILD) $(CCFLAGS_FOR_BUILD) $(OBJ1) -o $@ ${LIBS_FOR_BUILD}
+
+clean:
+	$(RM) man2html$(EXEEXT) $(OBJ1)
+
+distclean maintainer-clean mostlyclean: clean
+	$(RM) bash.pc bashbug.sh
+
+man2html.o: man2html.c
diff --git a/support/SYMLINKS b/support/SYMLINKS
new file mode 100644
index 0000000..06bbed7
--- /dev/null
+++ b/support/SYMLINKS
@@ -0,0 +1,18 @@
+#
+# symlink map for bash source tree
+#
+#	link name		link target
+#
+lib/readline/tilde.c		../tilde/tilde.c
+lib/readline/tilde.h		../tilde/tilde.h
+#
+lib/readline/ansi_stdlib.h	../../include/ansi_stdlib.h
+lib/readline/posixdir.h		../../include/posixdir.h
+lib/readline/posixjmp.h		../../include/posixjmp.h
+lib/readline/posixselect.h	../../include/posixselect.h
+lib/readline/posixstat.h	../../include/posixstat.h
+#lib/readline/rlstdc.h		../../include/stdc.h
+#lib/readline/xmalloc.c		../malloc/xmalloc.c
+#
+#lib/tilde/memalloc.h		../../include/memalloc.h
+#
diff --git a/support/bash.pc.in b/support/bash.pc.in
new file mode 100644
index 0000000..6009659
--- /dev/null
+++ b/support/bash.pc.in
@@ -0,0 +1,28 @@
+# bash.pc.in
+
+prefix=@prefix@
+exec_prefix=@exec_prefix@
+includedir=@includedir@
+libdir=@libdir@
+
+loadablesdir=@loadablesdir@
+headersdir=${includedir}/@PACKAGE_NAME@
+
+LOCAL_CFLAGS = @LOCAL_CFLAGS@
+LOCAL_DEFS = @LOCAL_DEFS@
+CCFLAGS = ${LOCAL_DEFS} ${LOCAL_CFLAGS}
+
+CC = @CC@
+SHOBJ_CC = @SHOBJ_CC@
+SHOBJ_CFLAGS = @SHOBJ_CFLAGS@
+SHOBJ_LD = @SHOBJ_LD@
+SHOBJ_LDFLAGS = @SHOBJ_LDFLAGS@
+SHOBJ_XLDFLAGS = @SHOBJ_XLDFLAGS@
+SHOBJ_LIBS = @SHOBJ_LIBS@
+
+Name: @PACKAGE_NAME@
+Description: Bash headers for bash loadable builtins
+Version: @PACKAGE_VERSION@
+Url: @PACKAGE_URL@
+Libs: ${SHOBJ_LIBS}
+Cflags: ${SHOBJ_CFLAGS} ${CCFLAGS} -I${headersdir} -I${headersdir}/builtins -I${headersdir}/include
diff --git a/support/bash.xbm b/support/bash.xbm
new file mode 100644
index 0000000..14bbe6a
--- /dev/null
+++ b/support/bash.xbm
@@ -0,0 +1,60 @@
+From: Simon Marshall <sm2@sequent.cc.hull.ac.uk>
+Date: Wed, 8 May 91 17:15:58 +0100
+To: bug-bash@ai.mit.edu
+Subject: X bitmap for bash
+
+        Since other GNU software comes with its very own X bitmap, I
+     thought it was about time bash had one too & here it is!  To use,
+     stick the stuff after my signature in a file <path>/bash.xbm.  If
+     using a twm window manager, insert the lines:
+
+IconDirectory           "<path>"
+Icons {
+        "<xterm title>" "bash.xbm"
+}
+        in your ~/.twmrc file.  The <xterm title> can be a prefix, so if
+     you have titles "bash@machine", the prefix "bash" will do.  I'm not
+     familiar enough with other window managers, but they should be
+     similar.
+
+        If you like it, you're welcome to it...
+
+        Simon.
+
+Copyright (C) 1992 Simon Marshall
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+#define bash_width 64
+#define bash_height 48
+static char bash_bits[] = {
+   0x00, 0x60, 0x06, 0x30, 0x04, 0x00, 0x00, 0x00, 0x60, 0x98, 0x01, 0x40,
+   0x03, 0x00, 0x00, 0x00, 0x19, 0x00, 0xa0, 0x80, 0x80, 0xff, 0x00, 0x00,
+   0x06, 0x00, 0x1c, 0x03, 0xe1, 0x5f, 0x03, 0x00, 0x02, 0x00, 0x22, 0x0c,
+   0x5d, 0xf4, 0x0e, 0x00, 0xe1, 0x02, 0x09, 0x19, 0x17, 0x91, 0x3d, 0x00,
+   0xf8, 0x87, 0x40, 0x90, 0x88, 0x88, 0x6e, 0x00, 0x8e, 0x9b, 0x04, 0x62,
+   0x22, 0x22, 0xd6, 0x00, 0x02, 0xee, 0x4c, 0x68, 0x44, 0x44, 0x6c, 0x01,
+   0x02, 0xf8, 0xa1, 0x4a, 0x11, 0x11, 0xb1, 0x02, 0x05, 0xa0, 0x22, 0xe0,
+   0x88, 0x88, 0x68, 0x03, 0x42, 0x50, 0x5d, 0x40, 0x22, 0x22, 0xa2, 0x05,
+   0x11, 0x81, 0x00, 0x44, 0x44, 0x44, 0x44, 0x07, 0x02, 0x20, 0x84, 0x60,
+   0x11, 0x11, 0xd1, 0x0d, 0x02, 0x0a, 0x02, 0xc0, 0x88, 0x88, 0x48, 0x0b,
+   0x44, 0x40, 0x00, 0x42, 0x22, 0x22, 0xa2, 0x1d, 0x24, 0x08, 0x02, 0x64,
+   0x44, 0x44, 0xc4, 0x1a, 0x08, 0x00, 0x20, 0x20, 0x11, 0x11, 0x91, 0x15,
+   0x88, 0x00, 0x00, 0xe1, 0xff, 0xff, 0xff, 0x1a, 0x10, 0x08, 0x22, 0x10,
+   0x00, 0x00, 0xc0, 0x15, 0x31, 0x40, 0x00, 0xf2, 0x03, 0xc0, 0xc1, 0x1a,
+   0x41, 0x24, 0x48, 0x6c, 0x06, 0x80, 0xc1, 0x15, 0x82, 0x01, 0x00, 0x66,
+   0x06, 0x80, 0xc1, 0x1a, 0x04, 0x22, 0x12, 0x67, 0x06, 0x80, 0xc1, 0x15,
+   0x0a, 0x04, 0xe0, 0x66, 0xe6, 0xb8, 0xc7, 0x1a, 0x09, 0xf0, 0x17, 0xee,
+   0xb3, 0xa5, 0xcf, 0x15, 0x30, 0x00, 0x00, 0x6e, 0x86, 0x8d, 0xcd, 0x1a,
+   0x00, 0x01, 0x80, 0x67, 0xe6, 0xbd, 0xcd, 0x15, 0x00, 0x46, 0x40, 0x66,
+   0xb6, 0xb1, 0xcd, 0x1a, 0x00, 0x38, 0x3c, 0x66, 0xb6, 0xa5, 0xcd, 0x15,
+   0x00, 0x00, 0x02, 0xf6, 0xe3, 0x9d, 0xdd, 0x1a, 0x00, 0x04, 0x60, 0x06,
+   0x00, 0x00, 0xc0, 0x15, 0x00, 0x04, 0x40, 0xfe, 0xff, 0xff, 0xff, 0x1a,
+   0x00, 0x02, 0x80, 0x12, 0x11, 0x11, 0x91, 0x15, 0x00, 0x00, 0x00, 0x8a,
+   0x88, 0x88, 0x88, 0x1a, 0x00, 0x00, 0x00, 0x22, 0x22, 0x22, 0xa2, 0x15,
+   0x00, 0x00, 0x00, 0x46, 0x44, 0x44, 0xc4, 0x9a, 0x00, 0x00, 0x00, 0x12,
+   0x11, 0x11, 0x91, 0xb5, 0x00, 0x00, 0x10, 0x8a, 0x88, 0x88, 0x88, 0xba,
+   0x00, 0x00, 0x10, 0x22, 0x22, 0x22, 0xa2, 0xd5, 0x00, 0x00, 0x30, 0xc6,
+   0x44, 0x44, 0xcc, 0xdf, 0x00, 0x20, 0x39, 0x96, 0x15, 0x51, 0x99, 0xf5,
+   0x80, 0xf2, 0x56, 0x8b, 0x9a, 0xea, 0x9b, 0xff, 0xc1, 0xad, 0x5e, 0xaf,
+   0xbb, 0xfa, 0xba, 0xdf, 0x22, 0x9b, 0xae, 0xd7, 0x54, 0x5d, 0xd7, 0xbf,
+   0x3b, 0x32, 0xce, 0xff, 0xff, 0xff, 0xff, 0xab, 0xae, 0x2b, 0x59, 0xaf,
+   0xd4, 0xae, 0x2e, 0xc3, 0xdd, 0x43, 0xa9, 0xd1, 0xba, 0xae, 0x2c, 0xcd};
diff --git a/support/bashbug.sh b/support/bashbug.sh
new file mode 100644
index 0000000..01e9f01
--- /dev/null
+++ b/support/bashbug.sh
@@ -0,0 +1,274 @@
+#!/bin/sh -
+#
+# bashbug - create a bug report and mail it to the bug address
+#
+# The bug address depends on the release status of the shell.  Versions
+# with status `devel', `alpha', `beta', or `rc' mail bug reports to
+# chet@cwru.edu and, optionally, to bash-testers@cwru.edu.
+# Other versions send mail to bug-bash@gnu.org.
+#
+# Copyright (C) 1996-2020 Free Software Foundation, Inc.
+#
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+#
+# configuration section:
+#	these variables are filled in by the make target in Makefile
+#
+MACHINE="!MACHINE!"
+OS="!OS!"
+CC="!CC!"
+CFLAGS="!CFLAGS!"
+RELEASE="!RELEASE!"
+PATCHLEVEL="!PATCHLEVEL!"
+RELSTATUS="!RELSTATUS!"
+MACHTYPE="!MACHTYPE!"
+
+PATH=/bin:/usr/bin:/usr/local/bin:$PATH
+export PATH
+
+# Check if TMPDIR is set, default to /tmp
+: ${TMPDIR:=/tmp}
+
+#Securely create a temporary directory for the temporary files
+TEMPDIR=$TMPDIR/bbug.$$
+(umask 077 && mkdir "$TEMPDIR") || {
+	echo "$0: could not create temporary directory" >&2
+	exit 1
+}
+
+TEMPFILE1=$TEMPDIR/bbug1
+TEMPFILE2=$TEMPDIR/bbug2
+        
+USAGE="Usage: $0 [--help] [--version] [bug-report-email-address]"
+VERSTR="GNU bashbug, version ${RELEASE}.${PATCHLEVEL}-${RELSTATUS}"
+
+do_help= do_version=
+
+while [ $# -gt 0 ]; do
+	case "$1" in
+	--help)		shift ; do_help=y ;;
+	--version)	shift ; do_version=y ;;
+	--)		shift ; break ;;
+	-*)		echo "bashbug: ${1}: invalid option" >&2
+			echo "$USAGE" >&2
+			exit 2 ;;
+	*)		break ;;
+	esac
+done
+
+if [ -n "$do_version" ]; then
+	echo "${VERSTR}"
+	exit 0
+fi
+
+if [ -n "$do_help" ]; then
+	echo "${VERSTR}"
+	echo "${USAGE}"
+	echo
+	cat << HERE_EOF
+Bashbug is used to send mail to the Bash maintainers
+for when Bash doesn't behave like you'd like, or expect.
+
+Bashbug will start up your editor (as defined by the shell's
+EDITOR environment variable) with a preformatted bug report
+template for you to fill in. The report will be mailed to the
+bug-bash mailing list by default. See the manual for details.
+
+If you invoke bashbug by accident, just quit your editor without
+saving any changes to the template, and no bug report will be sent.
+HERE_EOF
+	exit 0
+fi
+
+# Figure out how to echo a string without a trailing newline
+N=`echo 'hi there\c'`
+case "$N" in
+*c)	n=-n c= ;;
+*)	n= c='\c' ;;
+esac
+
+BASHTESTERS="bash-testers@cwru.edu"
+
+case "$RELSTATUS" in
+alpha*|beta*|devel*|rc*)	BUGBASH=chet@cwru.edu ;;
+*)				BUGBASH=bug-bash@gnu.org ;;
+esac
+
+case "$RELSTATUS" in
+alpha*|beta*|devel*|rc*)
+		echo "$0: This is a testing release.  Would you like your bug report"
+		echo "$0: to be sent to the bash-testers mailing list?"
+		echo $n "$0: Send to bash-testers? $c"
+		read ans
+		case "$ans" in
+		y*|Y*)	BUGBASH="${BUGBASH},${BASHTESTERS}" ;;
+		esac ;;
+esac
+
+BUGADDR="${1-$BUGBASH}"
+
+if [ -z "$DEFEDITOR" ] && [ -z "$EDITOR" ]; then
+	if [ -x /usr/bin/editor ]; then
+		DEFEDITOR=editor
+	elif [ -x /usr/local/bin/ce ]; then
+		DEFEDITOR=ce
+	elif [ -x /usr/local/bin/emacs ]; then
+		DEFEDITOR=emacs
+	elif [ -x /usr/contrib/bin/emacs ]; then
+		DEFEDITOR=emacs
+	elif [ -x /usr/bin/emacs ]; then
+		DEFEDITOR=emacs
+	elif [ -x /usr/bin/xemacs ]; then
+		DEFEDITOR=xemacs
+	elif [ -x /usr/bin/nano ]; then
+		DEFEDITOR=nano
+	elif [ -x /usr/contrib/bin/jove ]; then
+		DEFEDITOR=jove
+	elif [ -x /usr/local/bin/jove ]; then
+		DEFEDITOR=jove
+	elif [ -x /usr/bin/vi ]; then
+		DEFEDITOR=vi
+	else
+		echo "$0: No default editor found: attempting to use vi" >&2
+		DEFEDITOR=vi
+	fi
+fi
+
+
+: ${EDITOR=$DEFEDITOR}
+
+: ${USER=${LOGNAME-`whoami`}}
+
+trap 'rm -rf "$TEMPDIR"; exit 1' 1 2 3 13 15
+trap 'rm -rf "$TEMPDIR"' 0
+
+UN=
+if (uname) >/dev/null 2>&1; then
+	UN=`uname -a`
+fi
+
+if [ -f /usr/lib/sendmail ] ; then
+	RMAIL="/usr/lib/sendmail"
+	SMARGS="-i -t"
+elif [ -f /usr/sbin/sendmail ] ; then
+	RMAIL="/usr/sbin/sendmail"
+	SMARGS="-i -t"
+else
+	RMAIL=rmail
+	SMARGS="$BUGADDR"
+fi
+
+INITIAL_SUBJECT='[50 character or so descriptive subject here (for reference)]'
+
+cat > "$TEMPFILE1" <<EOF
+From: ${USER}
+To: ${BUGADDR}
+Subject: ${INITIAL_SUBJECT}
+
+Configuration Information [Automatically generated, do not change]:
+Machine: $MACHINE
+OS: $OS
+Compiler: $CC
+Compilation CFLAGS: $CFLAGS
+uname output: $UN
+Machine Type: $MACHTYPE
+
+Bash Version: $RELEASE
+Patch Level: $PATCHLEVEL
+Release Status: $RELSTATUS
+
+Description:
+	[Detailed description of the problem, suggestion, or complaint.]
+
+Repeat-By:
+	[Describe the sequence of events that causes the problem
+	to occur.]
+
+Fix:
+	[Description of how to fix the problem.  If you don't know a
+	fix for the problem, don't include this section.]
+EOF
+
+cp "$TEMPFILE1" "$TEMPFILE2"
+chmod u+w "$TEMPFILE1"
+
+trap '' 2		# ignore interrupts while in editor
+
+edstat=1
+while [ $edstat -ne 0 ]; do
+	$EDITOR "$TEMPFILE1"
+	edstat=$?
+
+	if [ $edstat -ne 0 ]; then
+		echo "$0: editor \`$EDITOR' exited with nonzero status."
+		echo "$0: Perhaps it was interrupted."
+		echo "$0: Type \`y' to give up, and lose your bug report;"
+		echo "$0: type \`n' to re-enter the editor."
+		echo $n "$0: Do you want to give up? $c"
+
+		read ans
+		case "$ans" in
+		[Yy]*) exit 1 ;;
+		esac
+
+		continue
+	fi
+
+	# find the subject from the temp file and see if it's been changed
+	CURR_SUB=`grep '^Subject: ' "$TEMPFILE1" | sed 's|^Subject:[ 	]*||' | sed 1q`
+
+	case "$CURR_SUB" in
+	"${INITIAL_SUBJECT}")
+		echo
+		echo "$0: You have not changed the subject from the default."
+		echo "$0: Please use a more descriptive subject header."
+		echo "$0: Type \`y' to give up, and lose your bug report;"
+		echo "$0: type \`n' to re-enter the editor."
+		echo $n "$0: Do you want to give up? $c"
+
+		read ans
+		case "$ans" in
+		[Yy]*) exit 1 ;;
+		esac
+
+		echo "$0:  The editor will be restarted in five seconds."
+		sleep 5
+		edstat=1
+		;;
+	esac
+
+done
+
+trap 'rm -rf "$TEMPDIR"; exit 1' 2	# restore trap on SIGINT
+
+if cmp -s "$TEMPFILE1" "$TEMPFILE2"
+then
+	echo "File not changed, no bug report submitted."
+	exit
+fi
+
+echo $n "Send bug report to ${BUGADDR}? [y/n] $c"
+read ans
+case "$ans" in
+[Nn]*)	exit 0 ;;
+esac
+
+${RMAIL} $SMARGS < "$TEMPFILE1" || {
+	cat "$TEMPFILE1" >> $HOME/dead.bashbug
+	echo "$0: mail to ${BUGADDR} failed: report saved in $HOME/dead.bashbug" >&2
+	echo "$0: please send it manually to ${BUGADDR}" >&2
+}
+
+exit 0
diff --git a/support/bashbug.sh.in b/support/bashbug.sh.in
new file mode 100644
index 0000000..d4b48c9
--- /dev/null
+++ b/support/bashbug.sh.in
@@ -0,0 +1,274 @@
+#!/bin/sh -
+#
+# bashbug - create a bug report and mail it to the bug address
+#
+# The bug address depends on the release status of the shell.  Versions
+# with status `devel', `alpha', `beta', or `rc' mail bug reports to
+# chet@cwru.edu and, optionally, to bash-testers@cwru.edu.
+# Other versions send mail to bug-bash@gnu.org.
+#
+# Copyright (C) 1996-2020 Free Software Foundation, Inc.
+#
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+#
+# configuration section:
+#	these variables are filled in by the make target in Makefile
+#
+MACHINE="@host_cpu@"
+OS="@host_os@"
+CC="@CC@"
+CFLAGS="@CFLAGS@"
+RELEASE="@BASHVERS@"
+PATCHLEVEL="!PATCHLEVEL!"
+RELSTATUS="@RELSTATUS@"
+MACHTYPE="@host@"
+
+PATH=/bin:/usr/bin:/usr/local/bin:$PATH
+export PATH
+
+# Check if TMPDIR is set, default to /tmp
+: ${TMPDIR:=/tmp}
+
+#Securely create a temporary directory for the temporary files
+TEMPDIR=$TMPDIR/bbug.$$
+(umask 077 && mkdir "$TEMPDIR") || {
+	echo "$0: could not create temporary directory" >&2
+	exit 1
+}
+
+TEMPFILE1=$TEMPDIR/bbug1
+TEMPFILE2=$TEMPDIR/bbug2
+        
+USAGE="Usage: $0 [--help] [--version] [bug-report-email-address]"
+VERSTR="GNU bashbug, version ${RELEASE}.${PATCHLEVEL}-${RELSTATUS}"
+
+do_help= do_version=
+
+while [ $# -gt 0 ]; do
+	case "$1" in
+	--help)		shift ; do_help=y ;;
+	--version)	shift ; do_version=y ;;
+	--)		shift ; break ;;
+	-*)		echo "bashbug: ${1}: invalid option" >&2
+			echo "$USAGE" >&2
+			exit 2 ;;
+	*)		break ;;
+	esac
+done
+
+if [ -n "$do_version" ]; then
+	echo "${VERSTR}"
+	exit 0
+fi
+
+if [ -n "$do_help" ]; then
+	echo "${VERSTR}"
+	echo "${USAGE}"
+	echo
+	cat << HERE_EOF
+Bashbug is used to send mail to the Bash maintainers
+for when Bash doesn't behave like you'd like, or expect.
+
+Bashbug will start up your editor (as defined by the shell's
+EDITOR environment variable) with a preformatted bug report
+template for you to fill in. The report will be mailed to the
+bug-bash mailing list by default. See the manual for details.
+
+If you invoke bashbug by accident, just quit your editor without
+saving any changes to the template, and no bug report will be sent.
+HERE_EOF
+	exit 0
+fi
+
+# Figure out how to echo a string without a trailing newline
+N=`echo 'hi there\c'`
+case "$N" in
+*c)	n=-n c= ;;
+*)	n= c='\c' ;;
+esac
+
+BASHTESTERS="bash-testers@cwru.edu"
+
+case "$RELSTATUS" in
+alpha*|beta*|devel*|rc*)	BUGBASH=chet@cwru.edu ;;
+*)				BUGBASH=bug-bash@gnu.org ;;
+esac
+
+case "$RELSTATUS" in
+alpha*|beta*|devel*|rc*)
+		echo "$0: This is a testing release.  Would you like your bug report"
+		echo "$0: to be sent to the bash-testers mailing list?"
+		echo $n "$0: Send to bash-testers? $c"
+		read ans
+		case "$ans" in
+		y*|Y*)	BUGBASH="${BUGBASH},${BASHTESTERS}" ;;
+		esac ;;
+esac
+
+BUGADDR="${1-$BUGBASH}"
+
+if [ -z "$DEFEDITOR" ] && [ -z "$EDITOR" ]; then
+	if [ -x /usr/bin/editor ]; then
+		DEFEDITOR=editor
+	elif [ -x /usr/local/bin/ce ]; then
+		DEFEDITOR=ce
+	elif [ -x /usr/local/bin/emacs ]; then
+		DEFEDITOR=emacs
+	elif [ -x /usr/contrib/bin/emacs ]; then
+		DEFEDITOR=emacs
+	elif [ -x /usr/bin/emacs ]; then
+		DEFEDITOR=emacs
+	elif [ -x /usr/bin/xemacs ]; then
+		DEFEDITOR=xemacs
+	elif [ -x /usr/bin/nano ]; then
+		DEFEDITOR=nano
+	elif [ -x /usr/contrib/bin/jove ]; then
+		DEFEDITOR=jove
+	elif [ -x /usr/local/bin/jove ]; then
+		DEFEDITOR=jove
+	elif [ -x /usr/bin/vi ]; then
+		DEFEDITOR=vi
+	else
+		echo "$0: No default editor found: attempting to use vi" >&2
+		DEFEDITOR=vi
+	fi
+fi
+
+
+: ${EDITOR=$DEFEDITOR}
+
+: ${USER=${LOGNAME-`whoami`}}
+
+trap 'rm -rf "$TEMPDIR"; exit 1' 1 2 3 13 15
+trap 'rm -rf "$TEMPDIR"' 0
+
+UN=
+if (uname) >/dev/null 2>&1; then
+	UN=`uname -a`
+fi
+
+if [ -f /usr/lib/sendmail ] ; then
+	RMAIL="/usr/lib/sendmail"
+	SMARGS="-i -t"
+elif [ -f /usr/sbin/sendmail ] ; then
+	RMAIL="/usr/sbin/sendmail"
+	SMARGS="-i -t"
+else
+	RMAIL=rmail
+	SMARGS="$BUGADDR"
+fi
+
+INITIAL_SUBJECT='[50 character or so descriptive subject here (for reference)]'
+
+cat > "$TEMPFILE1" <<EOF
+From: ${USER}
+To: ${BUGADDR}
+Subject: ${INITIAL_SUBJECT}
+
+Configuration Information [Automatically generated, do not change]:
+Machine: $MACHINE
+OS: $OS
+Compiler: $CC
+Compilation CFLAGS: $CFLAGS
+uname output: $UN
+Machine Type: $MACHTYPE
+
+Bash Version: $RELEASE
+Patch Level: $PATCHLEVEL
+Release Status: $RELSTATUS
+
+Description:
+	[Detailed description of the problem, suggestion, or complaint.]
+
+Repeat-By:
+	[Describe the sequence of events that causes the problem
+	to occur.]
+
+Fix:
+	[Description of how to fix the problem.  If you don't know a
+	fix for the problem, don't include this section.]
+EOF
+
+cp "$TEMPFILE1" "$TEMPFILE2"
+chmod u+w "$TEMPFILE1"
+
+trap '' 2		# ignore interrupts while in editor
+
+edstat=1
+while [ $edstat -ne 0 ]; do
+	$EDITOR "$TEMPFILE1"
+	edstat=$?
+
+	if [ $edstat -ne 0 ]; then
+		echo "$0: editor \`$EDITOR' exited with nonzero status."
+		echo "$0: Perhaps it was interrupted."
+		echo "$0: Type \`y' to give up, and lose your bug report;"
+		echo "$0: type \`n' to re-enter the editor."
+		echo $n "$0: Do you want to give up? $c"
+
+		read ans
+		case "$ans" in
+		[Yy]*) exit 1 ;;
+		esac
+
+		continue
+	fi
+
+	# find the subject from the temp file and see if it's been changed
+	CURR_SUB=`grep '^Subject: ' "$TEMPFILE1" | sed 's|^Subject:[ 	]*||' | sed 1q`
+
+	case "$CURR_SUB" in
+	"${INITIAL_SUBJECT}")
+		echo
+		echo "$0: You have not changed the subject from the default."
+		echo "$0: Please use a more descriptive subject header."
+		echo "$0: Type \`y' to give up, and lose your bug report;"
+		echo "$0: type \`n' to re-enter the editor."
+		echo $n "$0: Do you want to give up? $c"
+
+		read ans
+		case "$ans" in
+		[Yy]*) exit 1 ;;
+		esac
+
+		echo "$0:  The editor will be restarted in five seconds."
+		sleep 5
+		edstat=1
+		;;
+	esac
+
+done
+
+trap 'rm -rf "$TEMPDIR"; exit 1' 2	# restore trap on SIGINT
+
+if cmp -s "$TEMPFILE1" "$TEMPFILE2"
+then
+	echo "File not changed, no bug report submitted."
+	exit
+fi
+
+echo $n "Send bug report to ${BUGADDR}? [y/n] $c"
+read ans
+case "$ans" in
+[Nn]*)	exit 0 ;;
+esac
+
+${RMAIL} $SMARGS < "$TEMPFILE1" || {
+	cat "$TEMPFILE1" >> $HOME/dead.bashbug
+	echo "$0: mail to ${BUGADDR} failed: report saved in $HOME/dead.bashbug" >&2
+	echo "$0: please send it manually to ${BUGADDR}" >&2
+}
+
+exit 0
diff --git a/support/bashversion.c b/support/bashversion.c
new file mode 100644
index 0000000..4f86b13
--- /dev/null
+++ b/support/bashversion.c
@@ -0,0 +1,148 @@
+/* bashversion.c -- Display bash version information. */
+
+/* Copyright (C) 2001-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include "stdc.h"
+
+#include <stdio.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "bashansi.h"
+
+#include "version.h"
+#include "conftypes.h"
+
+#define RFLAG	0x0001
+#define VFLAG	0x0002
+#define MFLAG	0x0004
+#define PFLAG	0x0008
+#define SFLAG	0x0010
+#define LFLAG	0x0020
+#define XFLAG	0x0040
+
+extern int optind;
+extern char *optarg;
+
+extern char *dist_version;
+extern int patch_level;
+
+extern char *shell_version_string PARAMS((void));
+extern void show_shell_version PARAMS((int));
+
+char *shell_name = "bash";
+char *progname;
+
+static void
+usage()
+{
+  fprintf(stderr, "%s: usage: %s [-hrvpmlsx]\n", progname, progname);
+}
+
+int
+main (argc, argv)
+     int argc;
+     char **argv;
+{
+  int opt, oflags;
+  char dv[128], *rv;
+
+  if (progname = strrchr (argv[0], '/'))
+    progname++;
+  else
+    progname = argv[0];
+
+  oflags = 0;
+  while ((opt = getopt(argc, argv, "hrvmpslx")) != EOF)
+    {
+      switch (opt)
+	{
+	case 'h':
+	  usage ();
+	  exit (0);
+	case 'r':
+	  oflags |= RFLAG;	/* release */
+	  break;
+	case 'v':
+	  oflags |= VFLAG;	/* version */
+	  break;
+	case 'm':
+	  oflags |= MFLAG;	/* machtype */
+	  break;
+	case 'p':
+	  oflags |= PFLAG;	/* patchlevel */
+	  break;
+	case 's':		/* short version string */
+	  oflags |= SFLAG;
+	  break;
+	case 'l':		/* long version string */
+	  oflags |= LFLAG;
+	  break;
+	case 'x':		/* extended version information */
+	  oflags |= XFLAG;
+	  break;
+	default:
+	  usage ();
+	  exit (2);
+	}
+    }
+
+  argc -= optind;
+  argv += optind;
+
+  if (argc > 0)
+    {
+      usage ();
+      exit (2);
+    }
+
+  /* default behavior */  
+  if (oflags == 0)
+    oflags = SFLAG;
+
+  if (oflags & (RFLAG|VFLAG))
+    {
+      strcpy (dv, dist_version);
+      rv = strchr (dv, '.');
+      if (rv)
+        *rv++ = '\0';
+      else
+        rv = "00";
+    }
+  if (oflags & RFLAG)
+    printf ("%s\n", dv);
+  else if (oflags & VFLAG)
+    printf ("%s\n", rv);
+  else if (oflags & MFLAG)
+    printf ("%s\n", MACHTYPE);
+  else if (oflags & PFLAG)
+    printf ("%d\n", patch_level);
+  else if (oflags & SFLAG)
+    printf ("%s\n", shell_version_string ());
+  else if (oflags & LFLAG)
+    show_shell_version (0);
+  else if (oflags & XFLAG)
+    show_shell_version (1);
+
+  exit (0);
+}
diff --git a/support/checkbashisms b/support/checkbashisms
new file mode 100755
index 0000000..ea6cc14
--- /dev/null
+++ b/support/checkbashisms
@@ -0,0 +1,170 @@
+#! /usr/bin/perl -w
+
+# This script is essentially copied from /usr/share/lintian/checks/scripts,
+# which is:
+#   Copyright (C) 1998 Richard Braakman
+#   Copyright (C) 2002 Josip Rodin
+# This version is
+#   Copyright (C) 2003 Julian Gilbey
+# 
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+use strict;
+
+(my $progname = $0) =~ s|.*/||;
+
+my $usage = <<"EOF";
+Usage: $progname [-n] script ...
+   or: $progname --help
+   or: $progname --version
+This script performs basic checks for the presence of bashisms
+in /bin/sh scripts.
+EOF
+
+my $version = <<"EOF";
+This is $progname, from the Debian devscripts package, version 2.10.7ubuntu5
+This code is copyright 2003 by Julian Gilbey <jdg\@debian.org>,
+based on original code which is copyright 1998 by Richard Braakman
+and copyright 2002 by Josip Rodin.
+This program comes with ABSOLUTELY NO WARRANTY.
+You are free to redistribute this code under the terms of the
+GNU General Public License, version 3, or (at your option) any later version.
+EOF
+
+my $opt_echo = 0;
+
+##
+## handle command-line options
+##
+if (int(@ARGV) == 0 or $ARGV[0] =~ /^(--help|-h)$/) { print $usage; exit 0; }
+if (@ARGV and $ARGV[0] =~ /^(--version|-v)$/) { print $version; exit 0; }
+if (@ARGV and $ARGV[0] =~ /^(--newline|-n)$/) { $opt_echo = 1; }
+
+
+my $status = 0;
+
+foreach my $filename (@ARGV) {
+    if ($filename eq '-n' or $filename eq '--newline') {
+	next;
+    }
+    unless (open C, "$filename") {
+	warn "cannot open script $filename for reading: $!\n";
+	$status |= 2;
+	next;
+    }
+
+    my $cat_string = "";
+
+    while (<C>) {
+	if ($. == 1) { # This should be an interpreter line
+	    if (m,^\#!\s*(\S+),) {
+		my $interpreter = $1;
+		if ($interpreter =~ m,/bash$,) {
+		    warn "script $filename is already a bash script; skipping\n";
+		    $status |= 2;
+		    last;  # end this file
+		}
+		elsif ($interpreter !~ m,/(sh|ash|dash)$,) {
+		    warn "script $filename does not appear to be a /bin/sh script; skipping\n";
+		    $status |= 2;
+		    last;
+		}
+	    } else {
+		warn "script $filename does not appear to have a \#! interpreter line;\nyou may get strange results\n";
+	    }
+	}
+
+	next if m,^\s*\#,;  # skip comment lines
+	chomp;
+	my $orig_line = $_;
+
+	s/(?<!\\)\#.*$//;   # eat comments
+
+	if (m/(?:^|\s+)cat\s*\<\<\s*(\w+)/) {
+	    $cat_string = $1;
+	}
+	elsif ($cat_string ne "" and m/^$cat_string/) {
+	    $cat_string = "";
+	}
+	my $within_another_shell = 0;
+	if (m,(^|\s+)((/usr)?/bin/)?((b|d)?a|k|z|t?c)sh\s+-c\s*.+,) {
+	    $within_another_shell = 1;
+	}
+	# if cat_string is set, we are in a HERE document and need not
+	# check for things
+	if ($cat_string eq "" and !$within_another_shell) {
+	    my $found = 0;
+	    my $match = '';
+	    my $explanation = '';
+	    my %bashisms = (
+		'(?:^|\s+)function\s+\w+' =>   q<'function' is useless>,
+		'(?:^|\s+)select\s+\w+' =>     q<'select' is not POSIX>,
+		'(?:^|\s+)source\s+(?:\.\/|\/|\$)[^\s]+' =>
+		                               q<should be '.', not 'source'>,
+		'(\[|test|-o|-a)\s*[^\s]+\s+==\s' =>
+		                               q<should be 'b = a'>,
+		'\s\|\&' =>                    q<pipelining is not POSIX>,
+		'\$\[\w+\]' =>                 q<arithmetic not allowed>,
+		'\$\{\w+\:\d+(?::\d+)?\}' =>   q<${foo:3[:1]}>,
+		'\$\{!\w+[@*]\}' =>            q<${!prefix[*|@]>,
+		'\$\{!\w+\}' =>                q<${!name}>,
+		'\$\{\w+(/.+?){1,2}\}' =>      q<${parm/?/pat[/str]}>,
+		'[^\\\]\{([^\s]+?,)+[^\\\}\s]+\}' =>
+		                               q<brace expansion>,
+		'(?:^|\s+)\w+\[\d+\]=' =>      q<bash arrays, H[0]>,
+		'\$\{\#?\w+\[[0-9\*\@]+\]\}' => q<bash arrays, ${name[0|*|@]}>,
+		'(?:^|\s+)(read\s*(?:;|$))' => q<read without variable>,
+		'\$\(\([A-Za-z]' => q<cnt=$((cnt + 1)) does not work in dash>,
+		'echo\s+-[e]' =>               q<echo -e>,
+		'exec\s+-[acl]' =>             q<exec -c/-l/-a name>,
+		'\blet\s' =>                   q<let ...>,
+		'\$RANDOM\b' =>                q<$RANDOM>,
+		'(?<!\$)\(\(' =>               q<'((' should be '$(('>,
+	    );
+
+	    if ($opt_echo) {
+		$bashisms{'echo\s+-[n]'} = 'q<echo -n>';
+	    }
+
+	    while (my ($re,$expl) = each %bashisms) {
+		if (m/($re)/) {
+		    $found = 1;
+		    $match = $1;
+		    $explanation = $expl;
+		    last;
+		}
+	    }
+	    # since this test is ugly, I have to do it by itself
+	    # detect source (.) trying to pass args to the command it runs
+	    if (not $found and m/^\s*(\.\s+[^\s]+\s+([^\s]+))/) {
+		if ($2 eq '&&' || $2 eq '||') {
+		    # everything is ok
+		    ;
+		} else {
+		    $found = 1;
+		    $match = $1;
+		}
+	    }
+	    unless ($found == 0) {
+		warn "possible bashism in $filename line $. ($explanation):\n$orig_line\n";
+		$status |= 1;
+	    }
+	}
+    }
+
+    close C;
+}
+
+exit $status;
diff --git a/support/config.guess b/support/config.guess
new file mode 100755
index 0000000..0fc11ed
--- /dev/null
+++ b/support/config.guess
@@ -0,0 +1,1686 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+#   Copyright 1992-2020 Free Software Foundation, Inc.
+
+timestamp='2020-11-07'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <https://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
+#
+# Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
+#
+# You can get the latest version of this script from:
+# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
+#
+# Please send patches to <config-patches@gnu.org>.
+
+
+me=$(echo "$0" | sed -e 's,.*/,,')
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Options:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright 1992-2020 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help" >&2
+       exit 1 ;;
+    * )
+       break ;;
+  esac
+done
+
+if test $# != 0; then
+  echo "$me: too many arguments$help" >&2
+  exit 1
+fi
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+tmp=
+# shellcheck disable=SC2172
+trap 'test -z "$tmp" || rm -fr "$tmp"' 0 1 2 13 15
+
+set_cc_for_build() {
+    # prevent multiple calls if $tmp is already set
+    test "$tmp" && return 0
+    : "${TMPDIR=/tmp}"
+    # shellcheck disable=SC2039
+    { tmp=$( (umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null) && test -n "$tmp" && test -d "$tmp" ; } ||
+	{ test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir "$tmp" 2>/dev/null) ; } ||
+	{ tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir "$tmp" 2>/dev/null) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+	{ echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; }
+    dummy=$tmp/dummy
+    case ${CC_FOR_BUILD-},${HOST_CC-},${CC-} in
+	,,)    echo "int x;" > "$dummy.c"
+	       for driver in cc gcc c89 c99 ; do
+		   if ($driver -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then
+		       CC_FOR_BUILD="$driver"
+		       break
+		   fi
+	       done
+	       if test x"$CC_FOR_BUILD" = x ; then
+		   CC_FOR_BUILD=no_compiler_found
+	       fi
+	       ;;
+	,,*)   CC_FOR_BUILD=$CC ;;
+	,*,*)  CC_FOR_BUILD=$HOST_CC ;;
+    esac
+}
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if test -f /.attbin/uname ; then
+	PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=$( (uname -m) 2>/dev/null) || UNAME_MACHINE=unknown
+UNAME_RELEASE=$( (uname -r) 2>/dev/null) || UNAME_RELEASE=unknown
+UNAME_SYSTEM=$( (uname -s) 2>/dev/null) || UNAME_SYSTEM=unknown
+UNAME_VERSION=$( (uname -v) 2>/dev/null) || UNAME_VERSION=unknown
+
+case "$UNAME_SYSTEM" in
+Linux|GNU|GNU/*)
+	# If the system lacks a compiler, then just pick glibc.
+	# We could probably try harder.
+	LIBC=gnu
+
+	set_cc_for_build
+	cat <<-EOF > "$dummy.c"
+	#include <features.h>
+	#if defined(__UCLIBC__)
+	LIBC=uclibc
+	#elif defined(__dietlibc__)
+	LIBC=dietlibc
+	#else
+	#include <stdarg.h>
+	#ifdef __DEFINED_va_list
+	LIBC=musl
+	#else
+	LIBC=gnu
+	#endif
+	#endif
+	EOF
+	eval "$($CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g')"
+	;;
+esac
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "$UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION" in
+    *:NetBSD:*:*)
+	# NetBSD (nbsd) targets should (where applicable) match one or
+	# more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
+	# switched to ELF, *-*-netbsd* would select the old
+	# object file format.  This provides both forward
+	# compatibility and a consistent mechanism for selecting the
+	# object file format.
+	#
+	# Note: NetBSD doesn't particularly care about the vendor
+	# portion of the name.  We always set it to "unknown".
+	sysctl="sysctl -n hw.machine_arch"
+	UNAME_MACHINE_ARCH=$( (uname -p 2>/dev/null || \
+	    "/sbin/$sysctl" 2>/dev/null || \
+	    "/usr/sbin/$sysctl" 2>/dev/null || \
+	    echo unknown))
+	case "$UNAME_MACHINE_ARCH" in
+	    aarch64eb) machine=aarch64_be-unknown ;;
+	    armeb) machine=armeb-unknown ;;
+	    arm*) machine=arm-unknown ;;
+	    sh3el) machine=shl-unknown ;;
+	    sh3eb) machine=sh-unknown ;;
+	    sh5el) machine=sh5le-unknown ;;
+	    earmv*)
+		arch=$(echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,')
+		endian=$(echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p')
+		machine="${arch}${endian}"-unknown
+		;;
+	    *) machine="$UNAME_MACHINE_ARCH"-unknown ;;
+	esac
+	# The Operating System including object format, if it has switched
+	# to ELF recently (or will in the future) and ABI.
+	case "$UNAME_MACHINE_ARCH" in
+	    earm*)
+		os=netbsdelf
+		;;
+	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+		set_cc_for_build
+		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+			| grep -q __ELF__
+		then
+		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+		    # Return netbsd for either.  FIX?
+		    os=netbsd
+		else
+		    os=netbsdelf
+		fi
+		;;
+	    *)
+		os=netbsd
+		;;
+	esac
+	# Determine ABI tags.
+	case "$UNAME_MACHINE_ARCH" in
+	    earm*)
+		expr='s/^earmv[0-9]/-eabi/;s/eb$//'
+		abi=$(echo "$UNAME_MACHINE_ARCH" | sed -e "$expr")
+		;;
+	esac
+	# The OS release
+	# Debian GNU/NetBSD machines have a different userland, and
+	# thus, need a distinct triplet. However, they do not need
+	# kernel version information, so it can be replaced with a
+	# suitable tag, in the style of linux-gnu.
+	case "$UNAME_VERSION" in
+	    Debian*)
+		release='-gnu'
+		;;
+	    *)
+		release=$(echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2)
+		;;
+	esac
+	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+	# contains redundant information, the shorter form:
+	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+	echo "$machine-${os}${release}${abi-}"
+	exit ;;
+    *:Bitrig:*:*)
+	UNAME_MACHINE_ARCH=$(arch | sed 's/Bitrig.//')
+	echo "$UNAME_MACHINE_ARCH"-unknown-bitrig"$UNAME_RELEASE"
+	exit ;;
+    *:OpenBSD:*:*)
+	UNAME_MACHINE_ARCH=$(arch | sed 's/OpenBSD.//')
+	echo "$UNAME_MACHINE_ARCH"-unknown-openbsd"$UNAME_RELEASE"
+	exit ;;
+    *:LibertyBSD:*:*)
+	UNAME_MACHINE_ARCH=$(arch | sed 's/^.*BSD\.//')
+	echo "$UNAME_MACHINE_ARCH"-unknown-libertybsd"$UNAME_RELEASE"
+	exit ;;
+    *:MidnightBSD:*:*)
+	echo "$UNAME_MACHINE"-unknown-midnightbsd"$UNAME_RELEASE"
+	exit ;;
+    *:ekkoBSD:*:*)
+	echo "$UNAME_MACHINE"-unknown-ekkobsd"$UNAME_RELEASE"
+	exit ;;
+    *:SolidBSD:*:*)
+	echo "$UNAME_MACHINE"-unknown-solidbsd"$UNAME_RELEASE"
+	exit ;;
+    *:OS108:*:*)
+	echo "$UNAME_MACHINE"-unknown-os108_"$UNAME_RELEASE"
+	exit ;;
+    macppc:MirBSD:*:*)
+	echo powerpc-unknown-mirbsd"$UNAME_RELEASE"
+	exit ;;
+    *:MirBSD:*:*)
+	echo "$UNAME_MACHINE"-unknown-mirbsd"$UNAME_RELEASE"
+	exit ;;
+    *:Sortix:*:*)
+	echo "$UNAME_MACHINE"-unknown-sortix
+	exit ;;
+    *:Twizzler:*:*)
+	echo "$UNAME_MACHINE"-unknown-twizzler
+	exit ;;
+    *:Redox:*:*)
+	echo "$UNAME_MACHINE"-unknown-redox
+	exit ;;
+    mips:OSF1:*.*)
+	echo mips-dec-osf1
+	exit ;;
+    alpha:OSF1:*:*)
+	case $UNAME_RELEASE in
+	*4.0)
+		UNAME_RELEASE=$(/usr/sbin/sizer -v | awk '{print $3}')
+		;;
+	*5.*)
+		UNAME_RELEASE=$(/usr/sbin/sizer -v | awk '{print $4}')
+		;;
+	esac
+	# According to Compaq, /usr/sbin/psrinfo has been available on
+	# OSF/1 and Tru64 systems produced since 1995.  I hope that
+	# covers most systems running today.  This code pipes the CPU
+	# types through head -n 1, so we only detect the type of CPU 0.
+	ALPHA_CPU_TYPE=$(/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1)
+	case "$ALPHA_CPU_TYPE" in
+	    "EV4 (21064)")
+		UNAME_MACHINE=alpha ;;
+	    "EV4.5 (21064)")
+		UNAME_MACHINE=alpha ;;
+	    "LCA4 (21066/21068)")
+		UNAME_MACHINE=alpha ;;
+	    "EV5 (21164)")
+		UNAME_MACHINE=alphaev5 ;;
+	    "EV5.6 (21164A)")
+		UNAME_MACHINE=alphaev56 ;;
+	    "EV5.6 (21164PC)")
+		UNAME_MACHINE=alphapca56 ;;
+	    "EV5.7 (21164PC)")
+		UNAME_MACHINE=alphapca57 ;;
+	    "EV6 (21264)")
+		UNAME_MACHINE=alphaev6 ;;
+	    "EV6.7 (21264A)")
+		UNAME_MACHINE=alphaev67 ;;
+	    "EV6.8CB (21264C)")
+		UNAME_MACHINE=alphaev68 ;;
+	    "EV6.8AL (21264B)")
+		UNAME_MACHINE=alphaev68 ;;
+	    "EV6.8CX (21264D)")
+		UNAME_MACHINE=alphaev68 ;;
+	    "EV6.9A (21264/EV69A)")
+		UNAME_MACHINE=alphaev69 ;;
+	    "EV7 (21364)")
+		UNAME_MACHINE=alphaev7 ;;
+	    "EV7.9 (21364A)")
+		UNAME_MACHINE=alphaev79 ;;
+	esac
+	# A Pn.n version is a patched version.
+	# A Vn.n version is a released version.
+	# A Tn.n version is a released field test version.
+	# A Xn.n version is an unreleased experimental baselevel.
+	# 1.2 uses "1.2" for uname -r.
+	echo "$UNAME_MACHINE"-dec-osf"$(echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz)"
+	# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
+	exitcode=$?
+	trap '' 0
+	exit $exitcode ;;
+    Amiga*:UNIX_System_V:4.0:*)
+	echo m68k-unknown-sysv4
+	exit ;;
+    *:[Aa]miga[Oo][Ss]:*:*)
+	echo "$UNAME_MACHINE"-unknown-amigaos
+	exit ;;
+    *:[Mm]orph[Oo][Ss]:*:*)
+	echo "$UNAME_MACHINE"-unknown-morphos
+	exit ;;
+    *:OS/390:*:*)
+	echo i370-ibm-openedition
+	exit ;;
+    *:z/VM:*:*)
+	echo s390-ibm-zvmoe
+	exit ;;
+    *:OS400:*:*)
+	echo powerpc-ibm-os400
+	exit ;;
+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+	echo arm-acorn-riscix"$UNAME_RELEASE"
+	exit ;;
+    arm*:riscos:*:*|arm*:RISCOS:*:*)
+	echo arm-unknown-riscos
+	exit ;;
+    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+	echo hppa1.1-hitachi-hiuxmpp
+	exit ;;
+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+	if test "$( (/bin/universe) 2>/dev/null)" = att ; then
+		echo pyramid-pyramid-sysv3
+	else
+		echo pyramid-pyramid-bsd
+	fi
+	exit ;;
+    NILE*:*:*:dcosx)
+	echo pyramid-pyramid-svr4
+	exit ;;
+    DRS?6000:unix:4.0:6*)
+	echo sparc-icl-nx6
+	exit ;;
+    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+	case $(/usr/bin/uname -p) in
+	    sparc) echo sparc-icl-nx7; exit ;;
+	esac ;;
+    s390x:SunOS:*:*)
+	echo "$UNAME_MACHINE"-ibm-solaris2"$(echo "$UNAME_RELEASE" | sed -e 's/[^.]*//')"
+	exit ;;
+    sun4H:SunOS:5.*:*)
+	echo sparc-hal-solaris2"$(echo "$UNAME_RELEASE"|sed -e 's/[^.]*//')"
+	exit ;;
+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+	echo sparc-sun-solaris2"$(echo "$UNAME_RELEASE" | sed -e 's/[^.]*//')"
+	exit ;;
+    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+	echo i386-pc-auroraux"$UNAME_RELEASE"
+	exit ;;
+    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+	set_cc_for_build
+	SUN_ARCH=i386
+	# If there is a compiler, see if it is configured for 64-bit objects.
+	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+	# This test works for both compilers.
+	if test "$CC_FOR_BUILD" != no_compiler_found; then
+	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+		(CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+		grep IS_64BIT_ARCH >/dev/null
+	    then
+		SUN_ARCH=x86_64
+	    fi
+	fi
+	echo "$SUN_ARCH"-pc-solaris2"$(echo "$UNAME_RELEASE"|sed -e 's/[^.]*//')"
+	exit ;;
+    sun4*:SunOS:6*:*)
+	# According to config.sub, this is the proper way to canonicalize
+	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+	# it's likely to be more like Solaris than SunOS4.
+	echo sparc-sun-solaris3"$(echo "$UNAME_RELEASE"|sed -e 's/[^.]*//')"
+	exit ;;
+    sun4*:SunOS:*:*)
+	case "$(/usr/bin/arch -k)" in
+	    Series*|S4*)
+		UNAME_RELEASE=$(uname -v)
+		;;
+	esac
+	# Japanese Language versions have a version number like `4.1.3-JL'.
+	echo sparc-sun-sunos"$(echo "$UNAME_RELEASE"|sed -e 's/-/_/')"
+	exit ;;
+    sun3*:SunOS:*:*)
+	echo m68k-sun-sunos"$UNAME_RELEASE"
+	exit ;;
+    sun*:*:4.2BSD:*)
+	UNAME_RELEASE=$( (sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null)
+	test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3
+	case "$(/bin/arch)" in
+	    sun3)
+		echo m68k-sun-sunos"$UNAME_RELEASE"
+		;;
+	    sun4)
+		echo sparc-sun-sunos"$UNAME_RELEASE"
+		;;
+	esac
+	exit ;;
+    aushp:SunOS:*:*)
+	echo sparc-auspex-sunos"$UNAME_RELEASE"
+	exit ;;
+    # The situation for MiNT is a little confusing.  The machine name
+    # can be virtually everything (everything which is not
+    # "atarist" or "atariste" at least should have a processor
+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
+    # to the lowercase version "mint" (or "freemint").  Finally
+    # the system name "TOS" denotes a system which is actually not
+    # MiNT.  But MiNT is downward compatible to TOS, so this should
+    # be no problem.
+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint"$UNAME_RELEASE"
+	exit ;;
+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint"$UNAME_RELEASE"
+	exit ;;
+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+	echo m68k-atari-mint"$UNAME_RELEASE"
+	exit ;;
+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+	echo m68k-milan-mint"$UNAME_RELEASE"
+	exit ;;
+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+	echo m68k-hades-mint"$UNAME_RELEASE"
+	exit ;;
+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+	echo m68k-unknown-mint"$UNAME_RELEASE"
+	exit ;;
+    m68k:machten:*:*)
+	echo m68k-apple-machten"$UNAME_RELEASE"
+	exit ;;
+    powerpc:machten:*:*)
+	echo powerpc-apple-machten"$UNAME_RELEASE"
+	exit ;;
+    RISC*:Mach:*:*)
+	echo mips-dec-mach_bsd4.3
+	exit ;;
+    RISC*:ULTRIX:*:*)
+	echo mips-dec-ultrix"$UNAME_RELEASE"
+	exit ;;
+    VAX*:ULTRIX*:*:*)
+	echo vax-dec-ultrix"$UNAME_RELEASE"
+	exit ;;
+    2020:CLIX:*:* | 2430:CLIX:*:*)
+	echo clipper-intergraph-clix"$UNAME_RELEASE"
+	exit ;;
+    mips:*:*:UMIPS | mips:*:*:RISCos)
+	set_cc_for_build
+	sed 's/^	//' << EOF > "$dummy.c"
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+	#if defined (host_mips) && defined (MIPSEB)
+	#if defined (SYSTYPE_SYSV)
+	  printf ("mips-mips-riscos%ssysv\\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_SVR4)
+	  printf ("mips-mips-riscos%ssvr4\\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+	  printf ("mips-mips-riscos%sbsd\\n", argv[1]); exit (0);
+	#endif
+	#endif
+	  exit (-1);
+	}
+EOF
+	$CC_FOR_BUILD -o "$dummy" "$dummy.c" &&
+	  dummyarg=$(echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p') &&
+	  SYSTEM_NAME=$("$dummy" "$dummyarg") &&
+	    { echo "$SYSTEM_NAME"; exit; }
+	echo mips-mips-riscos"$UNAME_RELEASE"
+	exit ;;
+    Motorola:PowerMAX_OS:*:*)
+	echo powerpc-motorola-powermax
+	exit ;;
+    Motorola:*:4.3:PL8-*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:Power_UNIX:*:*)
+	echo powerpc-harris-powerunix
+	exit ;;
+    m88k:CX/UX:7*:*)
+	echo m88k-harris-cxux7
+	exit ;;
+    m88k:*:4*:R4*)
+	echo m88k-motorola-sysv4
+	exit ;;
+    m88k:*:3*:R3*)
+	echo m88k-motorola-sysv3
+	exit ;;
+    AViiON:dgux:*:*)
+	# DG/UX returns AViiON for all architectures
+	UNAME_PROCESSOR=$(/usr/bin/uname -p)
+	if test "$UNAME_PROCESSOR" = mc88100 || test "$UNAME_PROCESSOR" = mc88110
+	then
+	    if test "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx || \
+	       test "$TARGET_BINARY_INTERFACE"x = x
+	    then
+		echo m88k-dg-dgux"$UNAME_RELEASE"
+	    else
+		echo m88k-dg-dguxbcs"$UNAME_RELEASE"
+	    fi
+	else
+	    echo i586-dg-dgux"$UNAME_RELEASE"
+	fi
+	exit ;;
+    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
+	echo m88k-dolphin-sysv3
+	exit ;;
+    M88*:*:R3*:*)
+	# Delta 88k system running SVR3
+	echo m88k-motorola-sysv3
+	exit ;;
+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+	echo m88k-tektronix-sysv3
+	exit ;;
+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+	echo m68k-tektronix-bsd
+	exit ;;
+    *:IRIX*:*:*)
+	echo mips-sgi-irix"$(echo "$UNAME_RELEASE"|sed -e 's/-/_/g')"
+	exit ;;
+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
+	exit ;;               # Note that: echo "'$(uname -s)'" gives 'AIX '
+    i*86:AIX:*:*)
+	echo i386-ibm-aix
+	exit ;;
+    ia64:AIX:*:*)
+	if test -x /usr/bin/oslevel ; then
+		IBM_REV=$(/usr/bin/oslevel)
+	else
+		IBM_REV="$UNAME_VERSION.$UNAME_RELEASE"
+	fi
+	echo "$UNAME_MACHINE"-ibm-aix"$IBM_REV"
+	exit ;;
+    *:AIX:2:3)
+	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		set_cc_for_build
+		sed 's/^		//' << EOF > "$dummy.c"
+		#include <sys/systemcfg.h>
+
+		main()
+			{
+			if (!__power_pc())
+				exit(1);
+			puts("powerpc-ibm-aix3.2.5");
+			exit(0);
+			}
+EOF
+		if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=$("$dummy")
+		then
+			echo "$SYSTEM_NAME"
+		else
+			echo rs6000-ibm-aix3.2.5
+		fi
+	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+		echo rs6000-ibm-aix3.2.4
+	else
+		echo rs6000-ibm-aix3.2
+	fi
+	exit ;;
+    *:AIX:*:[4567])
+	IBM_CPU_ID=$(/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }')
+	if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then
+		IBM_ARCH=rs6000
+	else
+		IBM_ARCH=powerpc
+	fi
+	if test -x /usr/bin/lslpp ; then
+		IBM_REV=$(/usr/bin/lslpp -Lqc bos.rte.libc |
+			   awk -F: '{ print $3 }' | sed s/[0-9]*$/0/)
+	else
+		IBM_REV="$UNAME_VERSION.$UNAME_RELEASE"
+	fi
+	echo "$IBM_ARCH"-ibm-aix"$IBM_REV"
+	exit ;;
+    *:AIX:*:*)
+	echo rs6000-ibm-aix
+	exit ;;
+    ibmrt:4.4BSD:*|romp-ibm:4.4BSD:*)
+	echo romp-ibm-bsd4.4
+	exit ;;
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
+	echo romp-ibm-bsd"$UNAME_RELEASE"   # 4.3 with uname added to
+	exit ;;                             # report: romp-ibm BSD 4.3
+    *:BOSX:*:*)
+	echo rs6000-bull-bosx
+	exit ;;
+    DPX/2?00:B.O.S.:*:*)
+	echo m68k-bull-sysv3
+	exit ;;
+    9000/[34]??:4.3bsd:1.*:*)
+	echo m68k-hp-bsd
+	exit ;;
+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+	echo m68k-hp-bsd4.4
+	exit ;;
+    9000/[34678]??:HP-UX:*:*)
+	HPUX_REV=$(echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//')
+	case "$UNAME_MACHINE" in
+	    9000/31?)            HP_ARCH=m68000 ;;
+	    9000/[34]??)         HP_ARCH=m68k ;;
+	    9000/[678][0-9][0-9])
+		if test -x /usr/bin/getconf; then
+		    sc_cpu_version=$(/usr/bin/getconf SC_CPU_VERSION 2>/dev/null)
+		    sc_kernel_bits=$(/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null)
+		    case "$sc_cpu_version" in
+		      523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0
+		      528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1
+		      532)                      # CPU_PA_RISC2_0
+			case "$sc_kernel_bits" in
+			  32) HP_ARCH=hppa2.0n ;;
+			  64) HP_ARCH=hppa2.0w ;;
+			  '') HP_ARCH=hppa2.0 ;;   # HP-UX 10.20
+			esac ;;
+		    esac
+		fi
+		if test "$HP_ARCH" = ""; then
+		    set_cc_for_build
+		    sed 's/^		//' << EOF > "$dummy.c"
+
+		#define _HPUX_SOURCE
+		#include <stdlib.h>
+		#include <unistd.h>
+
+		int main ()
+		{
+		#if defined(_SC_KERNEL_BITS)
+		    long bits = sysconf(_SC_KERNEL_BITS);
+		#endif
+		    long cpu  = sysconf (_SC_CPU_VERSION);
+
+		    switch (cpu)
+			{
+			case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+			case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+			case CPU_PA_RISC2_0:
+		#if defined(_SC_KERNEL_BITS)
+			    switch (bits)
+				{
+				case 64: puts ("hppa2.0w"); break;
+				case 32: puts ("hppa2.0n"); break;
+				default: puts ("hppa2.0"); break;
+				} break;
+		#else  /* !defined(_SC_KERNEL_BITS) */
+			    puts ("hppa2.0"); break;
+		#endif
+			default: puts ("hppa1.0"); break;
+			}
+		    exit (0);
+		}
+EOF
+		    (CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=$("$dummy")
+		    test -z "$HP_ARCH" && HP_ARCH=hppa
+		fi ;;
+	esac
+	if test "$HP_ARCH" = hppa2.0w
+	then
+	    set_cc_for_build
+
+	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
+	    # generating 64-bit code.  GNU and HP use different nomenclature:
+	    #
+	    # $ CC_FOR_BUILD=cc ./config.guess
+	    # => hppa2.0w-hp-hpux11.23
+	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+	    # => hppa64-hp-hpux11.23
+
+	    if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) |
+		grep -q __LP64__
+	    then
+		HP_ARCH=hppa2.0w
+	    else
+		HP_ARCH=hppa64
+	    fi
+	fi
+	echo "$HP_ARCH"-hp-hpux"$HPUX_REV"
+	exit ;;
+    ia64:HP-UX:*:*)
+	HPUX_REV=$(echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//')
+	echo ia64-hp-hpux"$HPUX_REV"
+	exit ;;
+    3050*:HI-UX:*:*)
+	set_cc_for_build
+	sed 's/^	//' << EOF > "$dummy.c"
+	#include <unistd.h>
+	int
+	main ()
+	{
+	  long cpu = sysconf (_SC_CPU_VERSION);
+	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
+	     results, however.  */
+	  if (CPU_IS_PA_RISC (cpu))
+	    {
+	      switch (cpu)
+		{
+		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+		  default: puts ("hppa-hitachi-hiuxwe2"); break;
+		}
+	    }
+	  else if (CPU_IS_HP_MC68K (cpu))
+	    puts ("m68k-hitachi-hiuxwe2");
+	  else puts ("unknown-hitachi-hiuxwe2");
+	  exit (0);
+	}
+EOF
+	$CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=$("$dummy") &&
+		{ echo "$SYSTEM_NAME"; exit; }
+	echo unknown-hitachi-hiuxwe2
+	exit ;;
+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:*)
+	echo hppa1.1-hp-bsd
+	exit ;;
+    9000/8??:4.3bsd:*:*)
+	echo hppa1.0-hp-bsd
+	exit ;;
+    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+	echo hppa1.0-hp-mpeix
+	exit ;;
+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:*)
+	echo hppa1.1-hp-osf
+	exit ;;
+    hp8??:OSF1:*:*)
+	echo hppa1.0-hp-osf
+	exit ;;
+    i*86:OSF1:*:*)
+	if test -x /usr/sbin/sysversion ; then
+	    echo "$UNAME_MACHINE"-unknown-osf1mk
+	else
+	    echo "$UNAME_MACHINE"-unknown-osf1
+	fi
+	exit ;;
+    parisc*:Lites*:*:*)
+	echo hppa1.1-hp-lites
+	exit ;;
+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+	echo c1-convex-bsd
+	exit ;;
+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit ;;
+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+	echo c34-convex-bsd
+	exit ;;
+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+	echo c38-convex-bsd
+	exit ;;
+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+	echo c4-convex-bsd
+	exit ;;
+    CRAY*Y-MP:*:*:*)
+	echo ymp-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*[A-Z]90:*:*:*)
+	echo "$UNAME_MACHINE"-cray-unicos"$UNAME_RELEASE" \
+	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+	      -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*TS:*:*:*)
+	echo t90-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*T3E:*:*:*)
+	echo alphaev5-cray-unicosmk"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*SV1:*:*:*)
+	echo sv1-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    *:UNICOS/mp:*:*)
+	echo craynv-cray-unicosmp"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+	FUJITSU_PROC=$(uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz)
+	FUJITSU_SYS=$(uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///')
+	FUJITSU_REL=$(echo "$UNAME_RELEASE" | sed -e 's/ /_/')
+	echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    5000:UNIX_System_V:4.*:*)
+	FUJITSU_SYS=$(uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///')
+	FUJITSU_REL=$(echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/')
+	echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+	echo "$UNAME_MACHINE"-pc-bsdi"$UNAME_RELEASE"
+	exit ;;
+    sparc*:BSD/OS:*:*)
+	echo sparc-unknown-bsdi"$UNAME_RELEASE"
+	exit ;;
+    *:BSD/OS:*:*)
+	echo "$UNAME_MACHINE"-unknown-bsdi"$UNAME_RELEASE"
+	exit ;;
+    arm:FreeBSD:*:*)
+	UNAME_PROCESSOR=$(uname -p)
+	set_cc_for_build
+	if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+	    | grep -q __ARM_PCS_VFP
+	then
+	    echo "${UNAME_PROCESSOR}"-unknown-freebsd"$(echo ${UNAME_RELEASE}|sed -e 's/[-(].*//')"-gnueabi
+	else
+	    echo "${UNAME_PROCESSOR}"-unknown-freebsd"$(echo ${UNAME_RELEASE}|sed -e 's/[-(].*//')"-gnueabihf
+	fi
+	exit ;;
+    *:FreeBSD:*:*)
+	UNAME_PROCESSOR=$(/usr/bin/uname -p)
+	case "$UNAME_PROCESSOR" in
+	    amd64)
+		UNAME_PROCESSOR=x86_64 ;;
+	    i386)
+		UNAME_PROCESSOR=i586 ;;
+	esac
+	echo "$UNAME_PROCESSOR"-unknown-freebsd"$(echo "$UNAME_RELEASE"|sed -e 's/[-(].*//')"
+	exit ;;
+    i*:CYGWIN*:*)
+	echo "$UNAME_MACHINE"-pc-cygwin
+	exit ;;
+    *:MINGW64*:*)
+	echo "$UNAME_MACHINE"-pc-mingw64
+	exit ;;
+    *:MINGW*:*)
+	echo "$UNAME_MACHINE"-pc-mingw32
+	exit ;;
+    *:MSYS*:*)
+	echo "$UNAME_MACHINE"-pc-msys
+	exit ;;
+    i*:PW*:*)
+	echo "$UNAME_MACHINE"-pc-pw32
+	exit ;;
+    *:Interix*:*)
+	case "$UNAME_MACHINE" in
+	    x86)
+		echo i586-pc-interix"$UNAME_RELEASE"
+		exit ;;
+	    authenticamd | genuineintel | EM64T)
+		echo x86_64-unknown-interix"$UNAME_RELEASE"
+		exit ;;
+	    IA64)
+		echo ia64-unknown-interix"$UNAME_RELEASE"
+		exit ;;
+	esac ;;
+    i*:UWIN*:*)
+	echo "$UNAME_MACHINE"-pc-uwin
+	exit ;;
+    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+	echo x86_64-pc-cygwin
+	exit ;;
+    prep*:SunOS:5.*:*)
+	echo powerpcle-unknown-solaris2"$(echo "$UNAME_RELEASE"|sed -e 's/[^.]*//')"
+	exit ;;
+    *:GNU:*:*)
+	# the GNU system
+	echo "$(echo "$UNAME_MACHINE"|sed -e 's,[-/].*$,,')-unknown-$LIBC$(echo "$UNAME_RELEASE"|sed -e 's,/.*$,,')"
+	exit ;;
+    *:GNU/*:*:*)
+	# other systems with GNU libc and userland
+	echo "$UNAME_MACHINE-unknown-$(echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]")$(echo "$UNAME_RELEASE"|sed -e 's/[-(].*//')-$LIBC"
+	exit ;;
+    *:Minix:*:*)
+	echo "$UNAME_MACHINE"-unknown-minix
+	exit ;;
+    aarch64:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    aarch64_be:Linux:*:*)
+	UNAME_MACHINE=aarch64_be
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    alpha:Linux:*:*)
+	case $(sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' /proc/cpuinfo 2>/dev/null) in
+	  EV5)   UNAME_MACHINE=alphaev5 ;;
+	  EV56)  UNAME_MACHINE=alphaev56 ;;
+	  PCA56) UNAME_MACHINE=alphapca56 ;;
+	  PCA57) UNAME_MACHINE=alphapca56 ;;
+	  EV6)   UNAME_MACHINE=alphaev6 ;;
+	  EV67)  UNAME_MACHINE=alphaev67 ;;
+	  EV68*) UNAME_MACHINE=alphaev68 ;;
+	esac
+	objdump --private-headers /bin/sh | grep -q ld.so.1
+	if test "$?" = 0 ; then LIBC=gnulibc1 ; fi
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    arc:Linux:*:* | arceb:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    arm*:Linux:*:*)
+	set_cc_for_build
+	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+	    | grep -q __ARM_EABI__
+	then
+	    echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	else
+	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+		| grep -q __ARM_PCS_VFP
+	    then
+		echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabi
+	    else
+		echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabihf
+	    fi
+	fi
+	exit ;;
+    avr32*:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    cris:Linux:*:*)
+	echo "$UNAME_MACHINE"-axis-linux-"$LIBC"
+	exit ;;
+    crisv32:Linux:*:*)
+	echo "$UNAME_MACHINE"-axis-linux-"$LIBC"
+	exit ;;
+    e2k:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    frv:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    hexagon:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    i*86:Linux:*:*)
+	echo "$UNAME_MACHINE"-pc-linux-"$LIBC"
+	exit ;;
+    ia64:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    k1om:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    m32r*:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    m68*:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    mips:Linux:*:* | mips64:Linux:*:*)
+	set_cc_for_build
+	IS_GLIBC=0
+	test x"${LIBC}" = xgnu && IS_GLIBC=1
+	sed 's/^	//' << EOF > "$dummy.c"
+	#undef CPU
+	#undef mips
+	#undef mipsel
+	#undef mips64
+	#undef mips64el
+	#if ${IS_GLIBC} && defined(_ABI64)
+	LIBCABI=gnuabi64
+	#else
+	#if ${IS_GLIBC} && defined(_ABIN32)
+	LIBCABI=gnuabin32
+	#else
+	LIBCABI=${LIBC}
+	#endif
+	#endif
+
+	#if ${IS_GLIBC} && defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6
+	CPU=mipsisa64r6
+	#else
+	#if ${IS_GLIBC} && !defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6
+	CPU=mipsisa32r6
+	#else
+	#if defined(__mips64)
+	CPU=mips64
+	#else
+	CPU=mips
+	#endif
+	#endif
+	#endif
+
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	MIPS_ENDIAN=el
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	MIPS_ENDIAN=
+	#else
+	MIPS_ENDIAN=
+	#endif
+	#endif
+EOF
+	eval "$($CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU\|^MIPS_ENDIAN\|^LIBCABI')"
+	test "x$CPU" != x && { echo "$CPU${MIPS_ENDIAN}-unknown-linux-$LIBCABI"; exit; }
+	;;
+    mips64el:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    openrisc*:Linux:*:*)
+	echo or1k-unknown-linux-"$LIBC"
+	exit ;;
+    or32:Linux:*:* | or1k*:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    padre:Linux:*:*)
+	echo sparc-unknown-linux-"$LIBC"
+	exit ;;
+    parisc64:Linux:*:* | hppa64:Linux:*:*)
+	echo hppa64-unknown-linux-"$LIBC"
+	exit ;;
+    parisc:Linux:*:* | hppa:Linux:*:*)
+	# Look for CPU level
+	case $(grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2) in
+	  PA7*) echo hppa1.1-unknown-linux-"$LIBC" ;;
+	  PA8*) echo hppa2.0-unknown-linux-"$LIBC" ;;
+	  *)    echo hppa-unknown-linux-"$LIBC" ;;
+	esac
+	exit ;;
+    ppc64:Linux:*:*)
+	echo powerpc64-unknown-linux-"$LIBC"
+	exit ;;
+    ppc:Linux:*:*)
+	echo powerpc-unknown-linux-"$LIBC"
+	exit ;;
+    ppc64le:Linux:*:*)
+	echo powerpc64le-unknown-linux-"$LIBC"
+	exit ;;
+    ppcle:Linux:*:*)
+	echo powerpcle-unknown-linux-"$LIBC"
+	exit ;;
+    riscv32:Linux:*:* | riscv64:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    s390:Linux:*:* | s390x:Linux:*:*)
+	echo "$UNAME_MACHINE"-ibm-linux-"$LIBC"
+	exit ;;
+    sh64*:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    sh*:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    sparc:Linux:*:* | sparc64:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    tile*:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    vax:Linux:*:*)
+	echo "$UNAME_MACHINE"-dec-linux-"$LIBC"
+	exit ;;
+    x86_64:Linux:*:*)
+	set_cc_for_build
+	LIBCABI=$LIBC
+	if test "$CC_FOR_BUILD" != no_compiler_found; then
+	    if (echo '#ifdef __ILP32__'; echo IS_X32; echo '#endif') | \
+		(CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+		grep IS_X32 >/dev/null
+	    then
+		LIBCABI="$LIBC"x32
+	    fi
+	fi
+	echo "$UNAME_MACHINE"-pc-linux-"$LIBCABI"
+	exit ;;
+    xtensa*:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    i*86:DYNIX/ptx:4*:*)
+	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+	# earlier versions are messed up and put the nodename in both
+	# sysname and nodename.
+	echo i386-sequent-sysv4
+	exit ;;
+    i*86:UNIX_SV:4.2MP:2.*)
+	# Unixware is an offshoot of SVR4, but it has its own version
+	# number series starting with 2...
+	# I am not positive that other SVR4 systems won't match this,
+	# I just have to hope.  -- rms.
+	# Use sysv4.2uw... so that sysv4* matches it.
+	echo "$UNAME_MACHINE"-pc-sysv4.2uw"$UNAME_VERSION"
+	exit ;;
+    i*86:OS/2:*:*)
+	# If we were able to find `uname', then EMX Unix compatibility
+	# is probably installed.
+	echo "$UNAME_MACHINE"-pc-os2-emx
+	exit ;;
+    i*86:XTS-300:*:STOP)
+	echo "$UNAME_MACHINE"-unknown-stop
+	exit ;;
+    i*86:atheos:*:*)
+	echo "$UNAME_MACHINE"-unknown-atheos
+	exit ;;
+    i*86:syllable:*:*)
+	echo "$UNAME_MACHINE"-pc-syllable
+	exit ;;
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
+	echo i386-unknown-lynxos"$UNAME_RELEASE"
+	exit ;;
+    i*86:*DOS:*:*)
+	echo "$UNAME_MACHINE"-pc-msdosdjgpp
+	exit ;;
+    i*86:*:4.*:*)
+	UNAME_REL=$(echo "$UNAME_RELEASE" | sed 's/\/MP$//')
+	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+		echo "$UNAME_MACHINE"-univel-sysv"$UNAME_REL"
+	else
+		echo "$UNAME_MACHINE"-pc-sysv"$UNAME_REL"
+	fi
+	exit ;;
+    i*86:*:5:[678]*)
+	# UnixWare 7.x, OpenUNIX and OpenServer 6.
+	case $(/bin/uname -X | grep "^Machine") in
+	    *486*)	     UNAME_MACHINE=i486 ;;
+	    *Pentium)	     UNAME_MACHINE=i586 ;;
+	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+	esac
+	echo "$UNAME_MACHINE-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}"
+	exit ;;
+    i*86:*:3.2:*)
+	if test -f /usr/options/cb.name; then
+		UNAME_REL=$(sed -n 's/.*Version //p' </usr/options/cb.name)
+		echo "$UNAME_MACHINE"-pc-isc"$UNAME_REL"
+	elif /bin/uname -X 2>/dev/null >/dev/null ; then
+		UNAME_REL=$( (/bin/uname -X|grep Release|sed -e 's/.*= //'))
+		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+			&& UNAME_MACHINE=i586
+		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		echo "$UNAME_MACHINE"-pc-sco"$UNAME_REL"
+	else
+		echo "$UNAME_MACHINE"-pc-sysv32
+	fi
+	exit ;;
+    pc:*:*:*)
+	# Left here for compatibility:
+	# uname -m prints for DJGPP always 'pc', but it prints nothing about
+	# the processor, so we play safe by assuming i586.
+	# Note: whatever this is, it MUST be the same as what config.sub
+	# prints for the "djgpp" host, or else GDB configure will decide that
+	# this is a cross-build.
+	echo i586-pc-msdosdjgpp
+	exit ;;
+    Intel:Mach:3*:*)
+	echo i386-pc-mach3
+	exit ;;
+    paragon:*:*:*)
+	echo i860-intel-osf1
+	exit ;;
+    i860:*:4.*:*) # i860-SVR4
+	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+	  echo i860-stardent-sysv"$UNAME_RELEASE" # Stardent Vistra i860-SVR4
+	else # Add other i860-SVR4 vendors below as they are discovered.
+	  echo i860-unknown-sysv"$UNAME_RELEASE"  # Unknown i860-SVR4
+	fi
+	exit ;;
+    mini*:CTIX:SYS*5:*)
+	# "miniframe"
+	echo m68010-convergent-sysv
+	exit ;;
+    mc68k:UNIX:SYSTEM5:3.51m)
+	echo m68k-convergent-sysv
+	exit ;;
+    M680?0:D-NIX:5.3:*)
+	echo m68k-diab-dnix
+	exit ;;
+    M68*:*:R3V[5678]*:*)
+	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+	OS_REL=''
+	test -r /etc/.relid \
+	&& OS_REL=.$(sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid)
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4.3"$OS_REL"; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	  && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;;
+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4; exit; } ;;
+    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+	OS_REL='.3'
+	test -r /etc/.relid \
+	    && OS_REL=.$(sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid)
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	    && { echo i486-ncr-sysv4.3"$OS_REL"; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	    && { echo i586-ncr-sysv4.3"$OS_REL"; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+	    && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;;
+    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+	echo m68k-unknown-lynxos"$UNAME_RELEASE"
+	exit ;;
+    mc68030:UNIX_System_V:4.*:*)
+	echo m68k-atari-sysv4
+	exit ;;
+    TSUNAMI:LynxOS:2.*:*)
+	echo sparc-unknown-lynxos"$UNAME_RELEASE"
+	exit ;;
+    rs6000:LynxOS:2.*:*)
+	echo rs6000-unknown-lynxos"$UNAME_RELEASE"
+	exit ;;
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
+	echo powerpc-unknown-lynxos"$UNAME_RELEASE"
+	exit ;;
+    SM[BE]S:UNIX_SV:*:*)
+	echo mips-dde-sysv"$UNAME_RELEASE"
+	exit ;;
+    RM*:ReliantUNIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    RM*:SINIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    *:SINIX-*:*:*)
+	if uname -p 2>/dev/null >/dev/null ; then
+		UNAME_MACHINE=$( (uname -p) 2>/dev/null)
+		echo "$UNAME_MACHINE"-sni-sysv4
+	else
+		echo ns32k-sni-sysv
+	fi
+	exit ;;
+    PENTIUM:*:4.0*:*)	# Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+			# says <Richard.M.Bartel@ccMail.Census.GOV>
+	echo i586-unisys-sysv4
+	exit ;;
+    *:UNIX_System_V:4*:FTX*)
+	# From Gerald Hewes <hewes@openmarket.com>.
+	# How about differentiating between stratus architectures? -djm
+	echo hppa1.1-stratus-sysv4
+	exit ;;
+    *:*:*:FTX*)
+	# From seanf@swdc.stratus.com.
+	echo i860-stratus-sysv4
+	exit ;;
+    i*86:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo "$UNAME_MACHINE"-stratus-vos
+	exit ;;
+    *:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo hppa1.1-stratus-vos
+	exit ;;
+    mc68*:A/UX:*:*)
+	echo m68k-apple-aux"$UNAME_RELEASE"
+	exit ;;
+    news*:NEWS-OS:6*:*)
+	echo mips-sony-newsos6
+	exit ;;
+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+	if test -d /usr/nec; then
+		echo mips-nec-sysv"$UNAME_RELEASE"
+	else
+		echo mips-unknown-sysv"$UNAME_RELEASE"
+	fi
+	exit ;;
+    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
+	echo powerpc-be-beos
+	exit ;;
+    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
+	echo powerpc-apple-beos
+	exit ;;
+    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
+	echo i586-pc-beos
+	exit ;;
+    BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
+	echo i586-pc-haiku
+	exit ;;
+    x86_64:Haiku:*:*)
+	echo x86_64-unknown-haiku
+	exit ;;
+    SX-4:SUPER-UX:*:*)
+	echo sx4-nec-superux"$UNAME_RELEASE"
+	exit ;;
+    SX-5:SUPER-UX:*:*)
+	echo sx5-nec-superux"$UNAME_RELEASE"
+	exit ;;
+    SX-6:SUPER-UX:*:*)
+	echo sx6-nec-superux"$UNAME_RELEASE"
+	exit ;;
+    SX-7:SUPER-UX:*:*)
+	echo sx7-nec-superux"$UNAME_RELEASE"
+	exit ;;
+    SX-8:SUPER-UX:*:*)
+	echo sx8-nec-superux"$UNAME_RELEASE"
+	exit ;;
+    SX-8R:SUPER-UX:*:*)
+	echo sx8r-nec-superux"$UNAME_RELEASE"
+	exit ;;
+    SX-ACE:SUPER-UX:*:*)
+	echo sxace-nec-superux"$UNAME_RELEASE"
+	exit ;;
+    Power*:Rhapsody:*:*)
+	echo powerpc-apple-rhapsody"$UNAME_RELEASE"
+	exit ;;
+    *:Rhapsody:*:*)
+	echo "$UNAME_MACHINE"-apple-rhapsody"$UNAME_RELEASE"
+	exit ;;
+    arm64:Darwin:*:*)
+	echo aarch64-apple-darwin"$UNAME_RELEASE"
+	exit ;;
+    *:Darwin:*:*)
+	UNAME_PROCESSOR=$(uname -p)
+	case $UNAME_PROCESSOR in
+	    unknown) UNAME_PROCESSOR=powerpc ;;
+	esac
+	if command -v xcode-select > /dev/null 2> /dev/null && \
+		! xcode-select --print-path > /dev/null 2> /dev/null ; then
+	    # Avoid executing cc if there is no toolchain installed as
+	    # cc will be a stub that puts up a graphical alert
+	    # prompting the user to install developer tools.
+	    CC_FOR_BUILD=no_compiler_found
+	else
+	    set_cc_for_build
+	fi
+	if test "$CC_FOR_BUILD" != no_compiler_found; then
+	    if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+		   (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+		   grep IS_64BIT_ARCH >/dev/null
+	    then
+		case $UNAME_PROCESSOR in
+		    i386) UNAME_PROCESSOR=x86_64 ;;
+		    powerpc) UNAME_PROCESSOR=powerpc64 ;;
+		esac
+	    fi
+	    # On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc
+	    if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \
+		   (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+		   grep IS_PPC >/dev/null
+	    then
+		UNAME_PROCESSOR=powerpc
+	    fi
+	elif test "$UNAME_PROCESSOR" = i386 ; then
+	    # uname -m returns i386 or x86_64
+	    UNAME_PROCESSOR=$UNAME_MACHINE
+	fi
+	echo "$UNAME_PROCESSOR"-apple-darwin"$UNAME_RELEASE"
+	exit ;;
+    *:procnto*:*:* | *:QNX:[0123456789]*:*)
+	UNAME_PROCESSOR=$(uname -p)
+	if test "$UNAME_PROCESSOR" = x86; then
+		UNAME_PROCESSOR=i386
+		UNAME_MACHINE=pc
+	fi
+	echo "$UNAME_PROCESSOR"-"$UNAME_MACHINE"-nto-qnx"$UNAME_RELEASE"
+	exit ;;
+    *:QNX:*:4*)
+	echo i386-pc-qnx
+	exit ;;
+    NEO-*:NONSTOP_KERNEL:*:*)
+	echo neo-tandem-nsk"$UNAME_RELEASE"
+	exit ;;
+    NSE-*:NONSTOP_KERNEL:*:*)
+	echo nse-tandem-nsk"$UNAME_RELEASE"
+	exit ;;
+    NSR-*:NONSTOP_KERNEL:*:*)
+	echo nsr-tandem-nsk"$UNAME_RELEASE"
+	exit ;;
+    NSV-*:NONSTOP_KERNEL:*:*)
+	echo nsv-tandem-nsk"$UNAME_RELEASE"
+	exit ;;
+    NSX-*:NONSTOP_KERNEL:*:*)
+	echo nsx-tandem-nsk"$UNAME_RELEASE"
+	exit ;;
+    *:NonStop-UX:*:*)
+	echo mips-compaq-nonstopux
+	exit ;;
+    BS2000:POSIX*:*:*)
+	echo bs2000-siemens-sysv
+	exit ;;
+    DS/*:UNIX_System_V:*:*)
+	echo "$UNAME_MACHINE"-"$UNAME_SYSTEM"-"$UNAME_RELEASE"
+	exit ;;
+    *:Plan9:*:*)
+	# "uname -m" is not consistent, so use $cputype instead. 386
+	# is converted to i386 for consistency with other x86
+	# operating systems.
+	# shellcheck disable=SC2154
+	if test "$cputype" = 386; then
+	    UNAME_MACHINE=i386
+	else
+	    UNAME_MACHINE="$cputype"
+	fi
+	echo "$UNAME_MACHINE"-unknown-plan9
+	exit ;;
+    *:TOPS-10:*:*)
+	echo pdp10-unknown-tops10
+	exit ;;
+    *:TENEX:*:*)
+	echo pdp10-unknown-tenex
+	exit ;;
+    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+	echo pdp10-dec-tops20
+	exit ;;
+    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+	echo pdp10-xkl-tops20
+	exit ;;
+    *:TOPS-20:*:*)
+	echo pdp10-unknown-tops20
+	exit ;;
+    *:ITS:*:*)
+	echo pdp10-unknown-its
+	exit ;;
+    SEI:*:*:SEIUX)
+	echo mips-sei-seiux"$UNAME_RELEASE"
+	exit ;;
+    *:DragonFly:*:*)
+	echo "$UNAME_MACHINE"-unknown-dragonfly"$(echo "$UNAME_RELEASE"|sed -e 's/[-(].*//')"
+	exit ;;
+    *:*VMS:*:*)
+	UNAME_MACHINE=$( (uname -p) 2>/dev/null)
+	case "$UNAME_MACHINE" in
+	    A*) echo alpha-dec-vms ; exit ;;
+	    I*) echo ia64-dec-vms ; exit ;;
+	    V*) echo vax-dec-vms ; exit ;;
+	esac ;;
+    *:XENIX:*:SysV)
+	echo i386-pc-xenix
+	exit ;;
+    i*86:skyos:*:*)
+	echo "$UNAME_MACHINE"-pc-skyos"$(echo "$UNAME_RELEASE" | sed -e 's/ .*$//')"
+	exit ;;
+    i*86:rdos:*:*)
+	echo "$UNAME_MACHINE"-pc-rdos
+	exit ;;
+    i*86:AROS:*:*)
+	echo "$UNAME_MACHINE"-pc-aros
+	exit ;;
+    x86_64:VMkernel:*:*)
+	echo "$UNAME_MACHINE"-unknown-esx
+	exit ;;
+    amd64:Isilon\ OneFS:*:*)
+	echo x86_64-unknown-onefs
+	exit ;;
+    *:Unleashed:*:*)
+	echo "$UNAME_MACHINE"-unknown-unleashed"$UNAME_RELEASE"
+	exit ;;
+esac
+
+# No uname command or uname output not recognized.
+set_cc_for_build
+cat > "$dummy.c" <<EOF
+#ifdef _SEQUENT_
+#include <sys/types.h>
+#include <sys/utsname.h>
+#endif
+#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__)
+#if defined (vax) || defined (__vax) || defined (__vax__) || defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__)
+#include <signal.h>
+#if defined(_SIZE_T_) || defined(SIGLOST)
+#include <sys/utsname.h>
+#endif
+#endif
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
+     I don't know....  */
+  printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+  printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+  "4"
+#else
+  ""
+#endif
+  ); exit (0);
+#endif
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+  int version;
+  version=$( (hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null);
+  if (version < 4)
+    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+  else
+    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+  exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+  printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+  printf ("ns32k-encore-mach\n"); exit (0);
+#else
+  printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+  printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+  printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+  printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+  struct utsname un;
+
+  uname(&un);
+  if (strncmp(un.version, "V2", 2) == 0) {
+    printf ("i386-sequent-ptx2\n"); exit (0);
+  }
+  if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+    printf ("i386-sequent-ptx1\n"); exit (0);
+  }
+  printf ("i386-sequent-ptx\n"); exit (0);
+#endif
+
+#if defined (vax)
+#if !defined (ultrix)
+#include <sys/param.h>
+#if defined (BSD)
+#if BSD == 43
+  printf ("vax-dec-bsd4.3\n"); exit (0);
+#else
+#if BSD == 199006
+  printf ("vax-dec-bsd4.3reno\n"); exit (0);
+#else
+  printf ("vax-dec-bsd\n"); exit (0);
+#endif
+#endif
+#else
+  printf ("vax-dec-bsd\n"); exit (0);
+#endif
+#else
+#if defined(_SIZE_T_) || defined(SIGLOST)
+  struct utsname un;
+  uname (&un);
+  printf ("vax-dec-ultrix%s\n", un.release); exit (0);
+#else
+  printf ("vax-dec-ultrix\n"); exit (0);
+#endif
+#endif
+#endif
+#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__)
+#if defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__)
+#if defined(_SIZE_T_) || defined(SIGLOST)
+  struct utsname *un;
+  uname (&un);
+  printf ("mips-dec-ultrix%s\n", un.release); exit (0);
+#else
+  printf ("mips-dec-ultrix\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (alliant) && defined (i860)
+  printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+  exit (1);
+}
+EOF
+
+$CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null && SYSTEM_NAME=$($dummy) &&
+	{ echo "$SYSTEM_NAME"; exit; }
+
+# Apollos put the system type in the environment.
+test -d /usr/apollo && { echo "$ISP-apollo-$SYSTYPE"; exit; }
+
+echo "$0: unable to guess system type" >&2
+
+case "$UNAME_MACHINE:$UNAME_SYSTEM" in
+    mips:Linux | mips64:Linux)
+	# If we got here on MIPS GNU/Linux, output extra information.
+	cat >&2 <<EOF
+
+NOTE: MIPS GNU/Linux systems require a C compiler to fully recognize
+the system type. Please install a C compiler and try again.
+EOF
+	;;
+esac
+
+cat >&2 <<EOF
+
+This script (version $timestamp), has failed to recognize the
+operating system you are using. If your script is old, overwrite *all*
+copies of config.guess and config.sub with the latest versions from:
+
+  https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
+and
+  https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
+EOF
+
+year=$(echo $timestamp | sed 's,-.*,,')
+# shellcheck disable=SC2003
+if test "$(expr "$(date +%Y)" - "$year")" -lt 3 ; then
+   cat >&2 <<EOF
+
+If $0 has already been updated, send the following data and any
+information you think might be pertinent to config-patches@gnu.org to
+provide the necessary information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = $( (uname -m) 2>/dev/null || echo unknown)
+uname -r = $( (uname -r) 2>/dev/null || echo unknown)
+uname -s = $( (uname -s) 2>/dev/null || echo unknown)
+uname -v = $( (uname -v) 2>/dev/null || echo unknown)
+
+/usr/bin/uname -p = $( (/usr/bin/uname -p) 2>/dev/null)
+/bin/uname -X     = $( (/bin/uname -X) 2>/dev/null)
+
+hostinfo               = $( (hostinfo) 2>/dev/null)
+/bin/universe          = $( (/bin/universe) 2>/dev/null)
+/usr/bin/arch -k       = $( (/usr/bin/arch -k) 2>/dev/null)
+/bin/arch              = $( (/bin/arch) 2>/dev/null)
+/usr/bin/oslevel       = $( (/usr/bin/oslevel) 2>/dev/null)
+/usr/convex/getsysinfo = $( (/usr/convex/getsysinfo) 2>/dev/null)
+
+UNAME_MACHINE = "$UNAME_MACHINE"
+UNAME_RELEASE = "$UNAME_RELEASE"
+UNAME_SYSTEM  = "$UNAME_SYSTEM"
+UNAME_VERSION = "$UNAME_VERSION"
+EOF
+fi
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/support/config.rpath b/support/config.rpath
new file mode 100755
index 0000000..fc5913d
--- /dev/null
+++ b/support/config.rpath
@@ -0,0 +1,684 @@
+#! /bin/sh
+# Output a system dependent set of variables, describing how to set the
+# run time search path of shared libraries in an executable.
+#
+#   Copyright 1996-2018 Free Software Foundation, Inc.
+#   Taken from GNU libtool, 2001
+#   Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+#   This file is free software; the Free Software Foundation gives
+#   unlimited permission to copy and/or distribute it, with or without
+#   modifications, as long as this notice is preserved.
+#
+# The first argument passed to this file is the canonical host specification,
+#    CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or
+#    CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
+# should be set by the caller.
+#
+# The set of defined variables is at the end of this script.
+
+# Known limitations:
+# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer
+#   than 256 bytes, otherwise the compiler driver will dump core. The only
+#   known workaround is to choose shorter directory names for the build
+#   directory and/or the installation directory.
+
+# All known linkers require a '.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+shrext=.so
+
+host="$1"
+host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+# Code taken from libtool.m4's _LT_CC_BASENAME.
+
+for cc_temp in $CC""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'`
+
+# Code taken from libtool.m4's _LT_COMPILER_PIC.
+
+wl=
+if test "$GCC" = yes; then
+  wl='-Wl,'
+else
+  case "$host_os" in
+    aix*)
+      wl='-Wl,'
+      ;;
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      ;;
+    hpux9* | hpux10* | hpux11*)
+      wl='-Wl,'
+      ;;
+    irix5* | irix6* | nonstopux*)
+      wl='-Wl,'
+      ;;
+    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      case $cc_basename in
+        ecc*)
+          wl='-Wl,'
+          ;;
+        icc* | ifort*)
+          wl='-Wl,'
+          ;;
+        lf95*)
+          wl='-Wl,'
+          ;;
+        nagfor*)
+          wl='-Wl,-Wl,,'
+          ;;
+        pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+          wl='-Wl,'
+          ;;
+        ccc*)
+          wl='-Wl,'
+          ;;
+        xl* | bgxl* | bgf* | mpixl*)
+          wl='-Wl,'
+          ;;
+        como)
+          wl='-lopt='
+          ;;
+        *)
+          case `$CC -V 2>&1 | sed 5q` in
+            *Sun\ F* | *Sun*Fortran*)
+              wl=
+              ;;
+            *Sun\ C*)
+              wl='-Wl,'
+              ;;
+          esac
+          ;;
+      esac
+      ;;
+    newsos6)
+      ;;
+    *nto* | *qnx*)
+      ;;
+    osf3* | osf4* | osf5*)
+      wl='-Wl,'
+      ;;
+    rdos*)
+      ;;
+    solaris*)
+      case $cc_basename in
+        f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+          wl='-Qoption ld '
+          ;;
+        *)
+          wl='-Wl,'
+          ;;
+      esac
+      ;;
+    sunos4*)
+      wl='-Qoption ld '
+      ;;
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      wl='-Wl,'
+      ;;
+    sysv4*MP*)
+      ;;
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      wl='-Wl,'
+      ;;
+    unicos*)
+      wl='-Wl,'
+      ;;
+    uts4*)
+      ;;
+  esac
+fi
+
+# Code taken from libtool.m4's _LT_LINKER_SHLIBS.
+
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+
+case "$host_os" in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+  # Set some defaults for GNU ld with shared library support. These
+  # are reset later if shared libraries are not supported. Putting them
+  # here allows them to be overridden if necessary.
+  # Unlike libtool, we use -rpath here, not --rpath, since the documented
+  # option of GNU ld is called -rpath, not --rpath.
+  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+  case "$host_os" in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+        ld_shlibs=no
+      fi
+      ;;
+    amigaos*)
+      case "$host_cpu" in
+        powerpc)
+          ;;
+        m68k)
+          hardcode_libdir_flag_spec='-L$libdir'
+          hardcode_minus_L=yes
+          ;;
+      esac
+      ;;
+    beos*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    cygwin* | mingw* | pw32* | cegcc*)
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    haiku*)
+      ;;
+    interix[3-9]*)
+      hardcode_direct=no
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      ;;
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    netbsd*)
+      ;;
+    solaris*)
+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+        ld_shlibs=no
+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+          ld_shlibs=no
+          ;;
+        *)
+          if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+            hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+          else
+            ld_shlibs=no
+          fi
+          ;;
+      esac
+      ;;
+    sunos4*)
+      hardcode_direct=yes
+      ;;
+    *)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+  esac
+  if test "$ld_shlibs" = no; then
+    hardcode_libdir_flag_spec=
+  fi
+else
+  case "$host_os" in
+    aix3*)
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test "$GCC" = yes; then
+        # Neither direct hardcoding nor static linking is supported with a
+        # broken collect2.
+        hardcode_direct=unsupported
+      fi
+      ;;
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+        # On IA64, the linker does run time linking by default, so we don't
+        # have to do anything special.
+        aix_use_runtimelinking=no
+      else
+        aix_use_runtimelinking=no
+        # Test if we are trying to use run time linking or normal
+        # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+        # need to do runtime linking.
+        case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+          for ld_flag in $LDFLAGS; do
+            if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+              aix_use_runtimelinking=yes
+              break
+            fi
+          done
+          ;;
+        esac
+      fi
+      hardcode_direct=yes
+      hardcode_libdir_separator=':'
+      if test "$GCC" = yes; then
+        case $host_os in aix4.[012]|aix4.[012].*)
+          collect2name=`${CC} -print-prog-name=collect2`
+          if test -f "$collect2name" && \
+            strings "$collect2name" | grep resolve_lib_name >/dev/null
+          then
+            # We have reworked collect2
+            :
+          else
+            # We have old collect2
+            hardcode_direct=unsupported
+            hardcode_minus_L=yes
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_libdir_separator=
+          fi
+          ;;
+        esac
+      fi
+      # Begin _LT_AC_SYS_LIBPATH_AIX.
+      echo 'int main () { return 0; }' > conftest.c
+      ${CC} ${LDFLAGS} conftest.c -o conftest
+      aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+      if test -z "$aix_libpath"; then
+        aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+      fi
+      if test -z "$aix_libpath"; then
+        aix_libpath="/usr/lib:/lib"
+      fi
+      rm -f conftest.c conftest
+      # End _LT_AC_SYS_LIBPATH_AIX.
+      if test "$aix_use_runtimelinking" = yes; then
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+      else
+        if test "$host_cpu" = ia64; then
+          hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+        else
+          hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+        fi
+      fi
+      ;;
+    amigaos*)
+      case "$host_cpu" in
+        powerpc)
+          ;;
+        m68k)
+          hardcode_libdir_flag_spec='-L$libdir'
+          hardcode_minus_L=yes
+          ;;
+      esac
+      ;;
+    bsdi[45]*)
+      ;;
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec=' '
+      libext=lib
+      ;;
+    darwin* | rhapsody*)
+      hardcode_direct=no
+      if { case $cc_basename in ifort*) true;; *) test "$GCC" = yes;; esac; }; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    dgux*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      ;;
+    freebsd2.[01]*)
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      ;;
+    freebsd* | dragonfly*)
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      ;;
+    hpux9*)
+      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L=yes
+      ;;
+    hpux10*)
+      if test "$with_gnu_ld" = no; then
+        hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+        hardcode_libdir_separator=:
+        hardcode_direct=yes
+        # hardcode_minus_L: Not really in the search PATH,
+        # but as the default location of the library.
+        hardcode_minus_L=yes
+      fi
+      ;;
+    hpux11*)
+      if test "$with_gnu_ld" = no; then
+        hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+        hardcode_libdir_separator=:
+        case $host_cpu in
+          hppa*64*|ia64*)
+            hardcode_direct=no
+            ;;
+          *)
+            hardcode_direct=yes
+            # hardcode_minus_L: Not really in the search PATH,
+            # but as the default location of the library.
+            hardcode_minus_L=yes
+            ;;
+        esac
+      fi
+      ;;
+    irix5* | irix6* | nonstopux*)
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+    netbsd*)
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      ;;
+    newsos6)
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+    *nto* | *qnx*)
+      ;;
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+        hardcode_direct=yes
+        if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+          hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+        else
+          case "$host_os" in
+            openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+              hardcode_libdir_flag_spec='-R$libdir'
+              ;;
+            *)
+              hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+              ;;
+          esac
+        fi
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      ;;
+    osf3*)
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+    osf4* | osf5*)
+      if test "$GCC" = yes; then
+        hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      else
+        # Both cc and cxx compiler support -rpath directly
+        hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      hardcode_libdir_separator=:
+      ;;
+    solaris*)
+      hardcode_libdir_flag_spec='-R$libdir'
+      ;;
+    sunos4*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      ;;
+    sysv4)
+      case $host_vendor in
+        sni)
+          hardcode_direct=yes # is this really true???
+          ;;
+        siemens)
+          hardcode_direct=no
+          ;;
+        motorola)
+          hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+          ;;
+      esac
+      ;;
+    sysv4.3*)
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+        ld_shlibs=yes
+      fi
+      ;;
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      ;;
+    sysv5* | sco3.2v5* | sco5v6*)
+      hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      hardcode_libdir_separator=':'
+      ;;
+    uts4*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      ;;
+    *)
+      ld_shlibs=no
+      ;;
+  esac
+fi
+
+# Check dynamic linker characteristics
+# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER.
+# Unlike libtool.m4, here we don't care about _all_ names of the library, but
+# only about the one the linker finds when passed -lNAME. This is the last
+# element of library_names_spec in libtool.m4, or possibly two of them if the
+# linker has special search rules.
+library_names_spec=      # the last element of library_names_spec in libtool.m4
+libname_spec='lib$name'
+case "$host_os" in
+  aix3*)
+    library_names_spec='$libname.a'
+    ;;
+  aix[4-9]*)
+    library_names_spec='$libname$shrext'
+    ;;
+  amigaos*)
+    case "$host_cpu" in
+      powerpc*)
+        library_names_spec='$libname$shrext' ;;
+      m68k)
+        library_names_spec='$libname.a' ;;
+    esac
+    ;;
+  beos*)
+    library_names_spec='$libname$shrext'
+    ;;
+  bsdi[45]*)
+    library_names_spec='$libname$shrext'
+    ;;
+  cygwin* | mingw* | pw32* | cegcc*)
+    shrext=.dll
+    library_names_spec='$libname.dll.a $libname.lib'
+    ;;
+  darwin* | rhapsody*)
+    shrext=.dylib
+    library_names_spec='$libname$shrext'
+    ;;
+  dgux*)
+    library_names_spec='$libname$shrext'
+    ;;
+  freebsd[23].*)
+    library_names_spec='$libname$shrext$versuffix'
+    ;;
+  freebsd* | dragonfly*)
+    library_names_spec='$libname$shrext'
+    ;;
+  gnu*)
+    library_names_spec='$libname$shrext'
+    ;;
+  haiku*)
+    library_names_spec='$libname$shrext'
+    ;;
+  hpux9* | hpux10* | hpux11*)
+    case $host_cpu in
+      ia64*)
+        shrext=.so
+        ;;
+      hppa*64*)
+        shrext=.sl
+        ;;
+      *)
+        shrext=.sl
+        ;;
+    esac
+    library_names_spec='$libname$shrext'
+    ;;
+  interix[3-9]*)
+    library_names_spec='$libname$shrext'
+    ;;
+  irix5* | irix6* | nonstopux*)
+    library_names_spec='$libname$shrext'
+    case "$host_os" in
+      irix5* | nonstopux*)
+        libsuff= shlibsuff=
+        ;;
+      *)
+        case $LD in
+          *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;;
+          *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;;
+          *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;;
+          *) libsuff= shlibsuff= ;;
+        esac
+        ;;
+    esac
+    ;;
+  linux*oldld* | linux*aout* | linux*coff*)
+    ;;
+  linux* | k*bsd*-gnu | kopensolaris*-gnu)
+    library_names_spec='$libname$shrext'
+    ;;
+  knetbsd*-gnu)
+    library_names_spec='$libname$shrext'
+    ;;
+  netbsd*)
+    library_names_spec='$libname$shrext'
+    ;;
+  newsos6)
+    library_names_spec='$libname$shrext'
+    ;;
+  *nto* | *qnx*)
+    library_names_spec='$libname$shrext'
+    ;;
+  openbsd*)
+    library_names_spec='$libname$shrext$versuffix'
+    ;;
+  os2*)
+    libname_spec='$name'
+    shrext=.dll
+    library_names_spec='$libname.a'
+    ;;
+  osf3* | osf4* | osf5*)
+    library_names_spec='$libname$shrext'
+    ;;
+  rdos*)
+    ;;
+  solaris*)
+    library_names_spec='$libname$shrext'
+    ;;
+  sunos4*)
+    library_names_spec='$libname$shrext$versuffix'
+    ;;
+  sysv4 | sysv4.3*)
+    library_names_spec='$libname$shrext'
+    ;;
+  sysv4*MP*)
+    library_names_spec='$libname$shrext'
+    ;;
+  sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+    library_names_spec='$libname$shrext'
+    ;;
+  tpf*)
+    library_names_spec='$libname$shrext'
+    ;;
+  uts4*)
+    library_names_spec='$libname$shrext'
+    ;;
+esac
+
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
+shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
+escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+
+LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
+
+# How to pass a linker flag through the compiler.
+wl="$escaped_wl"
+
+# Static library suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally "so").
+shlibext="$shlibext"
+
+# Format of library name prefix.
+libname_spec="$escaped_libname_spec"
+
+# Library names that the linker finds when passed -lNAME.
+library_names_spec="$escaped_library_names_spec"
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator="$hardcode_libdir_separator"
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct="$hardcode_direct"
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L="$hardcode_minus_L"
+
+EOF
diff --git a/support/config.sub b/support/config.sub
new file mode 100755
index 0000000..c874b7a
--- /dev/null
+++ b/support/config.sub
@@ -0,0 +1,1853 @@
+#! /bin/sh
+# Configuration validation subroutine script.
+#   Copyright 1992-2020 Free Software Foundation, Inc.
+
+timestamp='2020-11-07'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <https://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
+
+
+# Please send patches to <config-patches@gnu.org>.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# You can get the latest version of this script from:
+# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support.  The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=$(echo "$0" | sed -e 's,.*/,,')
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS
+
+Canonicalize a configuration name.
+
+Options:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright 1992-2020 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help" >&2
+       exit 1 ;;
+
+    *local*)
+       # First pass through any local machine types.
+       echo "$1"
+       exit ;;
+
+    * )
+       break ;;
+  esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+    exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+    exit 1;;
+esac
+
+# Split fields of configuration type
+# shellcheck disable=SC2162
+IFS="-" read field1 field2 field3 field4 <<EOF
+$1
+EOF
+
+# Separate into logical components for further validation
+case $1 in
+	*-*-*-*-*)
+		echo Invalid configuration \`"$1"\': more than four components >&2
+		exit 1
+		;;
+	*-*-*-*)
+		basic_machine=$field1-$field2
+		basic_os=$field3-$field4
+		;;
+	*-*-*)
+		# Ambiguous whether COMPANY is present, or skipped and KERNEL-OS is two
+		# parts
+		maybe_os=$field2-$field3
+		case $maybe_os in
+			nto-qnx* | linux-* | uclinux-uclibc* \
+			| uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* \
+			| netbsd*-eabi* | kopensolaris*-gnu* | cloudabi*-eabi* \
+			| storm-chaos* | os2-emx* | rtmk-nova*)
+				basic_machine=$field1
+				basic_os=$maybe_os
+				;;
+			android-linux)
+				basic_machine=$field1-unknown
+				basic_os=linux-android
+				;;
+			*)
+				basic_machine=$field1-$field2
+				basic_os=$field3
+				;;
+		esac
+		;;
+	*-*)
+		# A lone config we happen to match not fitting any pattern
+		case $field1-$field2 in
+			decstation-3100)
+				basic_machine=mips-dec
+				basic_os=
+				;;
+			*-*)
+				# Second component is usually, but not always the OS
+				case $field2 in
+					# Prevent following clause from handling this valid os
+					sun*os*)
+						basic_machine=$field1
+						basic_os=$field2
+						;;
+					# Manufacturers
+					dec* | mips* | sequent* | encore* | pc533* | sgi* | sony* \
+					| att* | 7300* | 3300* | delta* | motorola* | sun[234]* \
+					| unicom* | ibm* | next | hp | isi* | apollo | altos* \
+					| convergent* | ncr* | news | 32* | 3600* | 3100* \
+					| hitachi* | c[123]* | convex* | sun | crds | omron* | dg \
+					| ultra | tti* | harris | dolphin | highlevel | gould \
+					| cbm | ns | masscomp | apple | axis | knuth | cray \
+					| microblaze* | sim | cisco \
+					| oki | wec | wrs | winbond)
+						basic_machine=$field1-$field2
+						basic_os=
+						;;
+					*)
+						basic_machine=$field1
+						basic_os=$field2
+						;;
+				esac
+			;;
+		esac
+		;;
+	*)
+		# Convert single-component short-hands not valid as part of
+		# multi-component configurations.
+		case $field1 in
+			386bsd)
+				basic_machine=i386-pc
+				basic_os=bsd
+				;;
+			a29khif)
+				basic_machine=a29k-amd
+				basic_os=udi
+				;;
+			adobe68k)
+				basic_machine=m68010-adobe
+				basic_os=scout
+				;;
+			alliant)
+				basic_machine=fx80-alliant
+				basic_os=
+				;;
+			altos | altos3068)
+				basic_machine=m68k-altos
+				basic_os=
+				;;
+			am29k)
+				basic_machine=a29k-none
+				basic_os=bsd
+				;;
+			amdahl)
+				basic_machine=580-amdahl
+				basic_os=sysv
+				;;
+			amiga)
+				basic_machine=m68k-unknown
+				basic_os=
+				;;
+			amigaos | amigados)
+				basic_machine=m68k-unknown
+				basic_os=amigaos
+				;;
+			amigaunix | amix)
+				basic_machine=m68k-unknown
+				basic_os=sysv4
+				;;
+			apollo68)
+				basic_machine=m68k-apollo
+				basic_os=sysv
+				;;
+			apollo68bsd)
+				basic_machine=m68k-apollo
+				basic_os=bsd
+				;;
+			aros)
+				basic_machine=i386-pc
+				basic_os=aros
+				;;
+			aux)
+				basic_machine=m68k-apple
+				basic_os=aux
+				;;
+			balance)
+				basic_machine=ns32k-sequent
+				basic_os=dynix
+				;;
+			blackfin)
+				basic_machine=bfin-unknown
+				basic_os=linux
+				;;
+			cegcc)
+				basic_machine=arm-unknown
+				basic_os=cegcc
+				;;
+			convex-c1)
+				basic_machine=c1-convex
+				basic_os=bsd
+				;;
+			convex-c2)
+				basic_machine=c2-convex
+				basic_os=bsd
+				;;
+			convex-c32)
+				basic_machine=c32-convex
+				basic_os=bsd
+				;;
+			convex-c34)
+				basic_machine=c34-convex
+				basic_os=bsd
+				;;
+			convex-c38)
+				basic_machine=c38-convex
+				basic_os=bsd
+				;;
+			cray)
+				basic_machine=j90-cray
+				basic_os=unicos
+				;;
+			crds | unos)
+				basic_machine=m68k-crds
+				basic_os=
+				;;
+			da30)
+				basic_machine=m68k-da30
+				basic_os=
+				;;
+			decstation | pmax | pmin | dec3100 | decstatn)
+				basic_machine=mips-dec
+				basic_os=
+				;;
+			delta88)
+				basic_machine=m88k-motorola
+				basic_os=sysv3
+				;;
+			dicos)
+				basic_machine=i686-pc
+				basic_os=dicos
+				;;
+			djgpp)
+				basic_machine=i586-pc
+				basic_os=msdosdjgpp
+				;;
+			ebmon29k)
+				basic_machine=a29k-amd
+				basic_os=ebmon
+				;;
+			es1800 | OSE68k | ose68k | ose | OSE)
+				basic_machine=m68k-ericsson
+				basic_os=ose
+				;;
+			gmicro)
+				basic_machine=tron-gmicro
+				basic_os=sysv
+				;;
+			go32)
+				basic_machine=i386-pc
+				basic_os=go32
+				;;
+			h8300hms)
+				basic_machine=h8300-hitachi
+				basic_os=hms
+				;;
+			h8300xray)
+				basic_machine=h8300-hitachi
+				basic_os=xray
+				;;
+			h8500hms)
+				basic_machine=h8500-hitachi
+				basic_os=hms
+				;;
+			harris)
+				basic_machine=m88k-harris
+				basic_os=sysv3
+				;;
+			hp300 | hp300hpux)
+				basic_machine=m68k-hp
+				basic_os=hpux
+				;;
+			hp300bsd)
+				basic_machine=m68k-hp
+				basic_os=bsd
+				;;
+			hppaosf)
+				basic_machine=hppa1.1-hp
+				basic_os=osf
+				;;
+			hppro)
+				basic_machine=hppa1.1-hp
+				basic_os=proelf
+				;;
+			i386mach)
+				basic_machine=i386-mach
+				basic_os=mach
+				;;
+			isi68 | isi)
+				basic_machine=m68k-isi
+				basic_os=sysv
+				;;
+			m68knommu)
+				basic_machine=m68k-unknown
+				basic_os=linux
+				;;
+			magnum | m3230)
+				basic_machine=mips-mips
+				basic_os=sysv
+				;;
+			merlin)
+				basic_machine=ns32k-utek
+				basic_os=sysv
+				;;
+			mingw64)
+				basic_machine=x86_64-pc
+				basic_os=mingw64
+				;;
+			mingw32)
+				basic_machine=i686-pc
+				basic_os=mingw32
+				;;
+			mingw32ce)
+				basic_machine=arm-unknown
+				basic_os=mingw32ce
+				;;
+			monitor)
+				basic_machine=m68k-rom68k
+				basic_os=coff
+				;;
+			morphos)
+				basic_machine=powerpc-unknown
+				basic_os=morphos
+				;;
+			moxiebox)
+				basic_machine=moxie-unknown
+				basic_os=moxiebox
+				;;
+			msdos)
+				basic_machine=i386-pc
+				basic_os=msdos
+				;;
+			msys)
+				basic_machine=i686-pc
+				basic_os=msys
+				;;
+			mvs)
+				basic_machine=i370-ibm
+				basic_os=mvs
+				;;
+			nacl)
+				basic_machine=le32-unknown
+				basic_os=nacl
+				;;
+			ncr3000)
+				basic_machine=i486-ncr
+				basic_os=sysv4
+				;;
+			netbsd386)
+				basic_machine=i386-pc
+				basic_os=netbsd
+				;;
+			netwinder)
+				basic_machine=armv4l-rebel
+				basic_os=linux
+				;;
+			news | news700 | news800 | news900)
+				basic_machine=m68k-sony
+				basic_os=newsos
+				;;
+			news1000)
+				basic_machine=m68030-sony
+				basic_os=newsos
+				;;
+			necv70)
+				basic_machine=v70-nec
+				basic_os=sysv
+				;;
+			nh3000)
+				basic_machine=m68k-harris
+				basic_os=cxux
+				;;
+			nh[45]000)
+				basic_machine=m88k-harris
+				basic_os=cxux
+				;;
+			nindy960)
+				basic_machine=i960-intel
+				basic_os=nindy
+				;;
+			mon960)
+				basic_machine=i960-intel
+				basic_os=mon960
+				;;
+			nonstopux)
+				basic_machine=mips-compaq
+				basic_os=nonstopux
+				;;
+			os400)
+				basic_machine=powerpc-ibm
+				basic_os=os400
+				;;
+			OSE68000 | ose68000)
+				basic_machine=m68000-ericsson
+				basic_os=ose
+				;;
+			os68k)
+				basic_machine=m68k-none
+				basic_os=os68k
+				;;
+			paragon)
+				basic_machine=i860-intel
+				basic_os=osf
+				;;
+			parisc)
+				basic_machine=hppa-unknown
+				basic_os=linux
+				;;
+			psp)
+				basic_machine=mipsallegrexel-sony
+				basic_os=psp
+				;;
+			pw32)
+				basic_machine=i586-unknown
+				basic_os=pw32
+				;;
+			rdos | rdos64)
+				basic_machine=x86_64-pc
+				basic_os=rdos
+				;;
+			rdos32)
+				basic_machine=i386-pc
+				basic_os=rdos
+				;;
+			rom68k)
+				basic_machine=m68k-rom68k
+				basic_os=coff
+				;;
+			sa29200)
+				basic_machine=a29k-amd
+				basic_os=udi
+				;;
+			sei)
+				basic_machine=mips-sei
+				basic_os=seiux
+				;;
+			sequent)
+				basic_machine=i386-sequent
+				basic_os=
+				;;
+			sps7)
+				basic_machine=m68k-bull
+				basic_os=sysv2
+				;;
+			st2000)
+				basic_machine=m68k-tandem
+				basic_os=
+				;;
+			stratus)
+				basic_machine=i860-stratus
+				basic_os=sysv4
+				;;
+			sun2)
+				basic_machine=m68000-sun
+				basic_os=
+				;;
+			sun2os3)
+				basic_machine=m68000-sun
+				basic_os=sunos3
+				;;
+			sun2os4)
+				basic_machine=m68000-sun
+				basic_os=sunos4
+				;;
+			sun3)
+				basic_machine=m68k-sun
+				basic_os=
+				;;
+			sun3os3)
+				basic_machine=m68k-sun
+				basic_os=sunos3
+				;;
+			sun3os4)
+				basic_machine=m68k-sun
+				basic_os=sunos4
+				;;
+			sun4)
+				basic_machine=sparc-sun
+				basic_os=
+				;;
+			sun4os3)
+				basic_machine=sparc-sun
+				basic_os=sunos3
+				;;
+			sun4os4)
+				basic_machine=sparc-sun
+				basic_os=sunos4
+				;;
+			sun4sol2)
+				basic_machine=sparc-sun
+				basic_os=solaris2
+				;;
+			sun386 | sun386i | roadrunner)
+				basic_machine=i386-sun
+				basic_os=
+				;;
+			sv1)
+				basic_machine=sv1-cray
+				basic_os=unicos
+				;;
+			symmetry)
+				basic_machine=i386-sequent
+				basic_os=dynix
+				;;
+			t3e)
+				basic_machine=alphaev5-cray
+				basic_os=unicos
+				;;
+			t90)
+				basic_machine=t90-cray
+				basic_os=unicos
+				;;
+			toad1)
+				basic_machine=pdp10-xkl
+				basic_os=tops20
+				;;
+			tpf)
+				basic_machine=s390x-ibm
+				basic_os=tpf
+				;;
+			udi29k)
+				basic_machine=a29k-amd
+				basic_os=udi
+				;;
+			ultra3)
+				basic_machine=a29k-nyu
+				basic_os=sym1
+				;;
+			v810 | necv810)
+				basic_machine=v810-nec
+				basic_os=none
+				;;
+			vaxv)
+				basic_machine=vax-dec
+				basic_os=sysv
+				;;
+			vms)
+				basic_machine=vax-dec
+				basic_os=vms
+				;;
+			vsta)
+				basic_machine=i386-pc
+				basic_os=vsta
+				;;
+			vxworks960)
+				basic_machine=i960-wrs
+				basic_os=vxworks
+				;;
+			vxworks68)
+				basic_machine=m68k-wrs
+				basic_os=vxworks
+				;;
+			vxworks29k)
+				basic_machine=a29k-wrs
+				basic_os=vxworks
+				;;
+			xbox)
+				basic_machine=i686-pc
+				basic_os=mingw32
+				;;
+			ymp)
+				basic_machine=ymp-cray
+				basic_os=unicos
+				;;
+			*)
+				basic_machine=$1
+				basic_os=
+				;;
+		esac
+		;;
+esac
+
+# Decode 1-component or ad-hoc basic machines
+case $basic_machine in
+	# Here we handle the default manufacturer of certain CPU types.  It is in
+	# some cases the only manufacturer, in others, it is the most popular.
+	w89k)
+		cpu=hppa1.1
+		vendor=winbond
+		;;
+	op50n)
+		cpu=hppa1.1
+		vendor=oki
+		;;
+	op60c)
+		cpu=hppa1.1
+		vendor=oki
+		;;
+	ibm*)
+		cpu=i370
+		vendor=ibm
+		;;
+	orion105)
+		cpu=clipper
+		vendor=highlevel
+		;;
+	mac | mpw | mac-mpw)
+		cpu=m68k
+		vendor=apple
+		;;
+	pmac | pmac-mpw)
+		cpu=powerpc
+		vendor=apple
+		;;
+
+	# Recognize the various machine names and aliases which stand
+	# for a CPU type and a company and sometimes even an OS.
+	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+		cpu=m68000
+		vendor=att
+		;;
+	3b*)
+		cpu=we32k
+		vendor=att
+		;;
+	bluegene*)
+		cpu=powerpc
+		vendor=ibm
+		basic_os=cnk
+		;;
+	decsystem10* | dec10*)
+		cpu=pdp10
+		vendor=dec
+		basic_os=tops10
+		;;
+	decsystem20* | dec20*)
+		cpu=pdp10
+		vendor=dec
+		basic_os=tops20
+		;;
+	delta | 3300 | motorola-3300 | motorola-delta \
+	      | 3300-motorola | delta-motorola)
+		cpu=m68k
+		vendor=motorola
+		;;
+	dpx2*)
+		cpu=m68k
+		vendor=bull
+		basic_os=sysv3
+		;;
+	encore | umax | mmax)
+		cpu=ns32k
+		vendor=encore
+		;;
+	elxsi)
+		cpu=elxsi
+		vendor=elxsi
+		basic_os=${basic_os:-bsd}
+		;;
+	fx2800)
+		cpu=i860
+		vendor=alliant
+		;;
+	genix)
+		cpu=ns32k
+		vendor=ns
+		;;
+	h3050r* | hiux*)
+		cpu=hppa1.1
+		vendor=hitachi
+		basic_os=hiuxwe2
+		;;
+	hp3k9[0-9][0-9] | hp9[0-9][0-9])
+		cpu=hppa1.0
+		vendor=hp
+		;;
+	hp9k2[0-9][0-9] | hp9k31[0-9])
+		cpu=m68000
+		vendor=hp
+		;;
+	hp9k3[2-9][0-9])
+		cpu=m68k
+		vendor=hp
+		;;
+	hp9k6[0-9][0-9] | hp6[0-9][0-9])
+		cpu=hppa1.0
+		vendor=hp
+		;;
+	hp9k7[0-79][0-9] | hp7[0-79][0-9])
+		cpu=hppa1.1
+		vendor=hp
+		;;
+	hp9k78[0-9] | hp78[0-9])
+		# FIXME: really hppa2.0-hp
+		cpu=hppa1.1
+		vendor=hp
+		;;
+	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+		# FIXME: really hppa2.0-hp
+		cpu=hppa1.1
+		vendor=hp
+		;;
+	hp9k8[0-9][13679] | hp8[0-9][13679])
+		cpu=hppa1.1
+		vendor=hp
+		;;
+	hp9k8[0-9][0-9] | hp8[0-9][0-9])
+		cpu=hppa1.0
+		vendor=hp
+		;;
+	i*86v32)
+		cpu=$(echo "$1" | sed -e 's/86.*/86/')
+		vendor=pc
+		basic_os=sysv32
+		;;
+	i*86v4*)
+		cpu=$(echo "$1" | sed -e 's/86.*/86/')
+		vendor=pc
+		basic_os=sysv4
+		;;
+	i*86v)
+		cpu=$(echo "$1" | sed -e 's/86.*/86/')
+		vendor=pc
+		basic_os=sysv
+		;;
+	i*86sol2)
+		cpu=$(echo "$1" | sed -e 's/86.*/86/')
+		vendor=pc
+		basic_os=solaris2
+		;;
+	j90 | j90-cray)
+		cpu=j90
+		vendor=cray
+		basic_os=${basic_os:-unicos}
+		;;
+	iris | iris4d)
+		cpu=mips
+		vendor=sgi
+		case $basic_os in
+		    irix*)
+			;;
+		    *)
+			basic_os=irix4
+			;;
+		esac
+		;;
+	miniframe)
+		cpu=m68000
+		vendor=convergent
+		;;
+	*mint | mint[0-9]* | *MiNT | *MiNT[0-9]*)
+		cpu=m68k
+		vendor=atari
+		basic_os=mint
+		;;
+	news-3600 | risc-news)
+		cpu=mips
+		vendor=sony
+		basic_os=newsos
+		;;
+	next | m*-next)
+		cpu=m68k
+		vendor=next
+		case $basic_os in
+		    openstep*)
+		        ;;
+		    nextstep*)
+			;;
+		    ns2*)
+		      basic_os=nextstep2
+			;;
+		    *)
+		      basic_os=nextstep3
+			;;
+		esac
+		;;
+	np1)
+		cpu=np1
+		vendor=gould
+		;;
+	op50n-* | op60c-*)
+		cpu=hppa1.1
+		vendor=oki
+		basic_os=proelf
+		;;
+	pa-hitachi)
+		cpu=hppa1.1
+		vendor=hitachi
+		basic_os=hiuxwe2
+		;;
+	pbd)
+		cpu=sparc
+		vendor=tti
+		;;
+	pbb)
+		cpu=m68k
+		vendor=tti
+		;;
+	pc532)
+		cpu=ns32k
+		vendor=pc532
+		;;
+	pn)
+		cpu=pn
+		vendor=gould
+		;;
+	power)
+		cpu=power
+		vendor=ibm
+		;;
+	ps2)
+		cpu=i386
+		vendor=ibm
+		;;
+	rm[46]00)
+		cpu=mips
+		vendor=siemens
+		;;
+	rtpc | rtpc-*)
+		cpu=romp
+		vendor=ibm
+		;;
+	sde)
+		cpu=mipsisa32
+		vendor=sde
+		basic_os=${basic_os:-elf}
+		;;
+	simso-wrs)
+		cpu=sparclite
+		vendor=wrs
+		basic_os=vxworks
+		;;
+	tower | tower-32)
+		cpu=m68k
+		vendor=ncr
+		;;
+	vpp*|vx|vx-*)
+		cpu=f301
+		vendor=fujitsu
+		;;
+	w65)
+		cpu=w65
+		vendor=wdc
+		;;
+	w89k-*)
+		cpu=hppa1.1
+		vendor=winbond
+		basic_os=proelf
+		;;
+	none)
+		cpu=none
+		vendor=none
+		;;
+	leon|leon[3-9])
+		cpu=sparc
+		vendor=$basic_machine
+		;;
+	leon-*|leon[3-9]-*)
+		cpu=sparc
+		vendor=$(echo "$basic_machine" | sed 's/-.*//')
+		;;
+
+	*-*)
+		# shellcheck disable=SC2162
+		IFS="-" read cpu vendor <<EOF
+$basic_machine
+EOF
+		;;
+	# We use `pc' rather than `unknown'
+	# because (1) that's what they normally are, and
+	# (2) the word "unknown" tends to confuse beginning users.
+	i*86 | x86_64)
+		cpu=$basic_machine
+		vendor=pc
+		;;
+	# These rules are duplicated from below for sake of the special case above;
+	# i.e. things that normalized to x86 arches should also default to "pc"
+	pc98)
+		cpu=i386
+		vendor=pc
+		;;
+	x64 | amd64)
+		cpu=x86_64
+		vendor=pc
+		;;
+	# Recognize the basic CPU types without company name.
+	*)
+		cpu=$basic_machine
+		vendor=unknown
+		;;
+esac
+
+unset -v basic_machine
+
+# Decode basic machines in the full and proper CPU-Company form.
+case $cpu-$vendor in
+	# Here we handle the default manufacturer of certain CPU types in canonical form. It is in
+	# some cases the only manufacturer, in others, it is the most popular.
+	craynv-unknown)
+		vendor=cray
+		basic_os=${basic_os:-unicosmp}
+		;;
+	c90-unknown | c90-cray)
+		vendor=cray
+		basic_os=${Basic_os:-unicos}
+		;;
+	fx80-unknown)
+		vendor=alliant
+		;;
+	romp-unknown)
+		vendor=ibm
+		;;
+	mmix-unknown)
+		vendor=knuth
+		;;
+	microblaze-unknown | microblazeel-unknown)
+		vendor=xilinx
+		;;
+	rs6000-unknown)
+		vendor=ibm
+		;;
+	vax-unknown)
+		vendor=dec
+		;;
+	pdp11-unknown)
+		vendor=dec
+		;;
+	we32k-unknown)
+		vendor=att
+		;;
+	cydra-unknown)
+		vendor=cydrome
+		;;
+	i370-ibm*)
+		vendor=ibm
+		;;
+	orion-unknown)
+		vendor=highlevel
+		;;
+	xps-unknown | xps100-unknown)
+		cpu=xps100
+		vendor=honeywell
+		;;
+
+	# Here we normalize CPU types with a missing or matching vendor
+	dpx20-unknown | dpx20-bull)
+		cpu=rs6000
+		vendor=bull
+		basic_os=${basic_os:-bosx}
+		;;
+
+	# Here we normalize CPU types irrespective of the vendor
+	amd64-*)
+		cpu=x86_64
+		;;
+	blackfin-*)
+		cpu=bfin
+		basic_os=linux
+		;;
+	c54x-*)
+		cpu=tic54x
+		;;
+	c55x-*)
+		cpu=tic55x
+		;;
+	c6x-*)
+		cpu=tic6x
+		;;
+	e500v[12]-*)
+		cpu=powerpc
+		basic_os=${basic_os}"spe"
+		;;
+	mips3*-*)
+		cpu=mips64
+		;;
+	ms1-*)
+		cpu=mt
+		;;
+	m68knommu-*)
+		cpu=m68k
+		basic_os=linux
+		;;
+	m9s12z-* | m68hcs12z-* | hcs12z-* | s12z-*)
+		cpu=s12z
+		;;
+	openrisc-*)
+		cpu=or32
+		;;
+	parisc-*)
+		cpu=hppa
+		basic_os=linux
+		;;
+	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+		cpu=i586
+		;;
+	pentiumpro-* | p6-* | 6x86-* | athlon-* | athalon_*-*)
+		cpu=i686
+		;;
+	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+		cpu=i686
+		;;
+	pentium4-*)
+		cpu=i786
+		;;
+	pc98-*)
+		cpu=i386
+		;;
+	ppc-* | ppcbe-*)
+		cpu=powerpc
+		;;
+	ppcle-* | powerpclittle-*)
+		cpu=powerpcle
+		;;
+	ppc64-*)
+		cpu=powerpc64
+		;;
+	ppc64le-* | powerpc64little-*)
+		cpu=powerpc64le
+		;;
+	sb1-*)
+		cpu=mipsisa64sb1
+		;;
+	sb1el-*)
+		cpu=mipsisa64sb1el
+		;;
+	sh5e[lb]-*)
+		cpu=$(echo "$cpu" | sed 's/^\(sh.\)e\(.\)$/\1\2e/')
+		;;
+	spur-*)
+		cpu=spur
+		;;
+	strongarm-* | thumb-*)
+		cpu=arm
+		;;
+	tx39-*)
+		cpu=mipstx39
+		;;
+	tx39el-*)
+		cpu=mipstx39el
+		;;
+	x64-*)
+		cpu=x86_64
+		;;
+	xscale-* | xscalee[bl]-*)
+		cpu=$(echo "$cpu" | sed 's/^xscale/arm/')
+		;;
+	arm64-*)
+		cpu=aarch64
+		;;
+
+	# Recognize the canonical CPU Types that limit and/or modify the
+	# company names they are paired with.
+	cr16-*)
+		basic_os=${basic_os:-elf}
+		;;
+	crisv32-* | etraxfs*-*)
+		cpu=crisv32
+		vendor=axis
+		;;
+	cris-* | etrax*-*)
+		cpu=cris
+		vendor=axis
+		;;
+	crx-*)
+		basic_os=${basic_os:-elf}
+		;;
+	neo-tandem)
+		cpu=neo
+		vendor=tandem
+		;;
+	nse-tandem)
+		cpu=nse
+		vendor=tandem
+		;;
+	nsr-tandem)
+		cpu=nsr
+		vendor=tandem
+		;;
+	nsv-tandem)
+		cpu=nsv
+		vendor=tandem
+		;;
+	nsx-tandem)
+		cpu=nsx
+		vendor=tandem
+		;;
+	mipsallegrexel-sony)
+		cpu=mipsallegrexel
+		vendor=sony
+		;;
+	tile*-*)
+		basic_os=${basic_os:-linux-gnu}
+		;;
+
+	*)
+		# Recognize the canonical CPU types that are allowed with any
+		# company name.
+		case $cpu in
+			1750a | 580 \
+			| a29k \
+			| aarch64 | aarch64_be \
+			| abacus \
+			| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] \
+			| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] \
+			| alphapca5[67] | alpha64pca5[67] \
+			| am33_2.0 \
+			| amdgcn \
+			| arc | arceb \
+			| arm | arm[lb]e | arme[lb] | armv* \
+			| avr | avr32 \
+			| asmjs \
+			| ba \
+			| be32 | be64 \
+			| bfin | bpf | bs2000 \
+			| c[123]* | c30 | [cjt]90 | c4x \
+			| c8051 | clipper | craynv | csky | cydra \
+			| d10v | d30v | dlx | dsp16xx \
+			| e2k | elxsi | epiphany \
+			| f30[01] | f700 | fido | fr30 | frv | ft32 | fx80 \
+			| h8300 | h8500 \
+			| hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+			| hexagon \
+			| i370 | i*86 | i860 | i960 | ia16 | ia64 \
+			| ip2k | iq2000 \
+			| k1om \
+			| le32 | le64 \
+			| lm32 \
+			| m32c | m32r | m32rle \
+			| m5200 | m68000 | m680[012346]0 | m68360 | m683?2 | m68k \
+			| m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x \
+			| m88110 | m88k | maxq | mb | mcore | mep | metag \
+			| microblaze | microblazeel \
+			| mips | mipsbe | mipseb | mipsel | mipsle \
+			| mips16 \
+			| mips64 | mips64eb | mips64el \
+			| mips64octeon | mips64octeonel \
+			| mips64orion | mips64orionel \
+			| mips64r5900 | mips64r5900el \
+			| mips64vr | mips64vrel \
+			| mips64vr4100 | mips64vr4100el \
+			| mips64vr4300 | mips64vr4300el \
+			| mips64vr5000 | mips64vr5000el \
+			| mips64vr5900 | mips64vr5900el \
+			| mipsisa32 | mipsisa32el \
+			| mipsisa32r2 | mipsisa32r2el \
+			| mipsisa32r6 | mipsisa32r6el \
+			| mipsisa64 | mipsisa64el \
+			| mipsisa64r2 | mipsisa64r2el \
+			| mipsisa64r6 | mipsisa64r6el \
+			| mipsisa64sb1 | mipsisa64sb1el \
+			| mipsisa64sr71k | mipsisa64sr71kel \
+			| mipsr5900 | mipsr5900el \
+			| mipstx39 | mipstx39el \
+			| mmix \
+			| mn10200 | mn10300 \
+			| moxie \
+			| mt \
+			| msp430 \
+			| nds32 | nds32le | nds32be \
+			| nfp \
+			| nios | nios2 | nios2eb | nios2el \
+			| none | np1 | ns16k | ns32k | nvptx \
+			| open8 \
+			| or1k* \
+			| or32 \
+			| orion \
+			| picochip \
+			| pdp10 | pdp11 | pj | pjl | pn | power \
+			| powerpc | powerpc64 | powerpc64le | powerpcle | powerpcspe \
+			| pru \
+			| pyramid \
+			| riscv | riscv32 | riscv64 \
+			| rl78 | romp | rs6000 | rx \
+			| s390 | s390x \
+			| score \
+			| sh | shl \
+			| sh[1234] | sh[24]a | sh[24]ae[lb] | sh[23]e | she[lb] | sh[lb]e \
+			| sh[1234]e[lb] |  sh[12345][lb]e | sh[23]ele | sh64 | sh64le \
+			| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet \
+			| sparclite \
+			| sparcv8 | sparcv9 | sparcv9b | sparcv9v | sv1 | sx* \
+			| spu \
+			| tahoe \
+			| tic30 | tic4x | tic54x | tic55x | tic6x | tic80 \
+			| tron \
+			| ubicom32 \
+			| v70 | v850 | v850e | v850e1 | v850es | v850e2 | v850e2v3 \
+			| vax \
+			| visium \
+			| w65 \
+			| wasm32 | wasm64 \
+			| we32k \
+			| x86 | x86_64 | xc16x | xgate | xps100 \
+			| xstormy16 | xtensa* \
+			| ymp \
+			| z8k | z80)
+				;;
+
+			*)
+				echo Invalid configuration \`"$1"\': machine \`"$cpu-$vendor"\' not recognized 1>&2
+				exit 1
+				;;
+		esac
+		;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $vendor in
+	digital*)
+		vendor=dec
+		;;
+	commodore*)
+		vendor=cbm
+		;;
+	*)
+		;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if test x$basic_os != x
+then
+
+# First recognize some ad-hoc caes, or perhaps split kernel-os, or else just
+# set os.
+case $basic_os in
+	gnu/linux*)
+		kernel=linux
+		os=$(echo $basic_os | sed -e 's|gnu/linux|gnu|')
+		;;
+	os2-emx)
+		kernel=os2
+		os=$(echo $basic_os | sed -e 's|os2-emx|emx|')
+		;;
+	nto-qnx*)
+		kernel=nto
+		os=$(echo $basic_os | sed -e 's|nto-qnx|qnx|')
+		;;
+	*-*)
+		# shellcheck disable=SC2162
+		IFS="-" read kernel os <<EOF
+$basic_os
+EOF
+		;;
+	# Default OS when just kernel was specified
+	nto*)
+		kernel=nto
+		os=$(echo $basic_os | sed -e 's|nto|qnx|')
+		;;
+	linux*)
+		kernel=linux
+		os=$(echo $basic_os | sed -e 's|linux|gnu|')
+		;;
+	*)
+		kernel=
+		os=$basic_os
+		;;
+esac
+
+# Now, normalize the OS (knowing we just have one component, it's not a kernel,
+# etc.)
+case $os in
+	# First match some system type aliases that might get confused
+	# with valid system types.
+	# solaris* is a basic system type, with this one exception.
+	auroraux)
+		os=auroraux
+		;;
+	bluegene*)
+		os=cnk
+		;;
+	solaris1 | solaris1.*)
+		os=$(echo $os | sed -e 's|solaris1|sunos4|')
+		;;
+	solaris)
+		os=solaris2
+		;;
+	unixware*)
+		os=sysv4.2uw
+		;;
+	# es1800 is here to avoid being matched by es* (a different OS)
+	es1800*)
+		os=ose
+		;;
+	# Some version numbers need modification
+	chorusos*)
+		os=chorusos
+		;;
+	isc)
+		os=isc2.2
+		;;
+	sco6)
+		os=sco5v6
+		;;
+	sco5)
+		os=sco3.2v5
+		;;
+	sco4)
+		os=sco3.2v4
+		;;
+	sco3.2.[4-9]*)
+		os=$(echo $os | sed -e 's/sco3.2./sco3.2v/')
+		;;
+	sco*v* | scout)
+		# Don't match below
+		;;
+	sco*)
+		os=sco3.2v2
+		;;
+	psos*)
+		os=psos
+		;;
+	qnx*)
+		os=qnx
+		;;
+	hiux*)
+		os=hiuxwe2
+		;;
+	lynx*178)
+		os=lynxos178
+		;;
+	lynx*5)
+		os=lynxos5
+		;;
+	lynxos*)
+		# don't get caught up in next wildcard
+		;;
+	lynx*)
+		os=lynxos
+		;;
+	mac[0-9]*)
+		os=$(echo "$os" | sed -e 's|mac|macos|')
+		;;
+	opened*)
+		os=openedition
+		;;
+	os400*)
+		os=os400
+		;;
+	sunos5*)
+		os=$(echo "$os" | sed -e 's|sunos5|solaris2|')
+		;;
+	sunos6*)
+		os=$(echo "$os" | sed -e 's|sunos6|solaris3|')
+		;;
+	wince*)
+		os=wince
+		;;
+	utek*)
+		os=bsd
+		;;
+	dynix*)
+		os=bsd
+		;;
+	acis*)
+		os=aos
+		;;
+	atheos*)
+		os=atheos
+		;;
+	syllable*)
+		os=syllable
+		;;
+	386bsd)
+		os=bsd
+		;;
+	ctix* | uts*)
+		os=sysv
+		;;
+	nova*)
+		os=rtmk-nova
+		;;
+	ns2)
+		os=nextstep2
+		;;
+	# Preserve the version number of sinix5.
+	sinix5.*)
+		os=$(echo $os | sed -e 's|sinix|sysv|')
+		;;
+	sinix*)
+		os=sysv4
+		;;
+	tpf*)
+		os=tpf
+		;;
+	triton*)
+		os=sysv3
+		;;
+	oss*)
+		os=sysv3
+		;;
+	svr4*)
+		os=sysv4
+		;;
+	svr3)
+		os=sysv3
+		;;
+	sysvr4)
+		os=sysv4
+		;;
+	ose*)
+		os=ose
+		;;
+	*mint | mint[0-9]* | *MiNT | MiNT[0-9]*)
+		os=mint
+		;;
+	dicos*)
+		os=dicos
+		;;
+	pikeos*)
+		# Until real need of OS specific support for
+		# particular features comes up, bare metal
+		# configurations are quite functional.
+		case $cpu in
+		    arm*)
+			os=eabi
+			;;
+		    *)
+			os=elf
+			;;
+		esac
+		;;
+	*)
+		# No normalization, but not necessarily accepted, that comes below.
+		;;
+esac
+
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system.  Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+kernel=
+case $cpu-$vendor in
+	score-*)
+		os=elf
+		;;
+	spu-*)
+		os=elf
+		;;
+	*-acorn)
+		os=riscix1.2
+		;;
+	arm*-rebel)
+		kernel=linux
+		os=gnu
+		;;
+	arm*-semi)
+		os=aout
+		;;
+	c4x-* | tic4x-*)
+		os=coff
+		;;
+	c8051-*)
+		os=elf
+		;;
+	clipper-intergraph)
+		os=clix
+		;;
+	hexagon-*)
+		os=elf
+		;;
+	tic54x-*)
+		os=coff
+		;;
+	tic55x-*)
+		os=coff
+		;;
+	tic6x-*)
+		os=coff
+		;;
+	# This must come before the *-dec entry.
+	pdp10-*)
+		os=tops20
+		;;
+	pdp11-*)
+		os=none
+		;;
+	*-dec | vax-*)
+		os=ultrix4.2
+		;;
+	m68*-apollo)
+		os=domain
+		;;
+	i386-sun)
+		os=sunos4.0.2
+		;;
+	m68000-sun)
+		os=sunos3
+		;;
+	m68*-cisco)
+		os=aout
+		;;
+	mep-*)
+		os=elf
+		;;
+	mips*-cisco)
+		os=elf
+		;;
+	mips*-*)
+		os=elf
+		;;
+	or32-*)
+		os=coff
+		;;
+	*-tti)	# must be before sparc entry or we get the wrong os.
+		os=sysv3
+		;;
+	sparc-* | *-sun)
+		os=sunos4.1.1
+		;;
+	pru-*)
+		os=elf
+		;;
+	*-be)
+		os=beos
+		;;
+	*-ibm)
+		os=aix
+		;;
+	*-knuth)
+		os=mmixware
+		;;
+	*-wec)
+		os=proelf
+		;;
+	*-winbond)
+		os=proelf
+		;;
+	*-oki)
+		os=proelf
+		;;
+	*-hp)
+		os=hpux
+		;;
+	*-hitachi)
+		os=hiux
+		;;
+	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+		os=sysv
+		;;
+	*-cbm)
+		os=amigaos
+		;;
+	*-dg)
+		os=dgux
+		;;
+	*-dolphin)
+		os=sysv3
+		;;
+	m68k-ccur)
+		os=rtu
+		;;
+	m88k-omron*)
+		os=luna
+		;;
+	*-next)
+		os=nextstep
+		;;
+	*-sequent)
+		os=ptx
+		;;
+	*-crds)
+		os=unos
+		;;
+	*-ns)
+		os=genix
+		;;
+	i370-*)
+		os=mvs
+		;;
+	*-gould)
+		os=sysv
+		;;
+	*-highlevel)
+		os=bsd
+		;;
+	*-encore)
+		os=bsd
+		;;
+	*-sgi)
+		os=irix
+		;;
+	*-siemens)
+		os=sysv4
+		;;
+	*-masscomp)
+		os=rtu
+		;;
+	f30[01]-fujitsu | f700-fujitsu)
+		os=uxpv
+		;;
+	*-rom68k)
+		os=coff
+		;;
+	*-*bug)
+		os=coff
+		;;
+	*-apple)
+		os=macos
+		;;
+	*-atari*)
+		os=mint
+		;;
+	*-wrs)
+		os=vxworks
+		;;
+	*)
+		os=none
+		;;
+esac
+
+fi
+
+# Now, validate our (potentially fixed-up) OS.
+case $os in
+	# Sometimes we do "kernel-abi", so those need to count as OSes.
+	musl* | newlib* | uclibc*)
+		;;
+	# Likewise for "kernel-libc"
+	eabi | eabihf | gnueabi | gnueabihf)
+		;;
+	# Now accept the basic system types.
+	# The portable systems comes first.
+	# Each alternative MUST end in a * to match a version number.
+	gnu* | android* | bsd* | mach* | minix* | genix* | ultrix* | irix* \
+	     | *vms* | esix* | aix* | cnk* | sunos | sunos[34]* \
+	     | hpux* | unos* | osf* | luna* | dgux* | auroraux* | solaris* \
+	     | sym* |  plan9* | psp* | sim* | xray* | os68k* | v88r* \
+	     | hiux* | abug | nacl* | netware* | windows* \
+	     | os9* | macos* | osx* | ios* \
+	     | mpw* | magic* | mmixware* | mon960* | lnews* \
+	     | amigaos* | amigados* | msdos* | newsos* | unicos* | aof* \
+	     | aos* | aros* | cloudabi* | sortix* | twizzler* \
+	     | nindy* | vxsim* | vxworks* | ebmon* | hms* | mvs* \
+	     | clix* | riscos* | uniplus* | iris* | isc* | rtu* | xenix* \
+	     | mirbsd* | netbsd* | dicos* | openedition* | ose* \
+	     | bitrig* | openbsd* | solidbsd* | libertybsd* | os108* \
+	     | ekkobsd* | freebsd* | riscix* | lynxos* | os400* \
+	     | bosx* | nextstep* | cxux* | aout* | elf* | oabi* \
+	     | ptx* | coff* | ecoff* | winnt* | domain* | vsta* \
+	     | udi* | lites* | ieee* | go32* | aux* | hcos* \
+	     | chorusrdb* | cegcc* | glidix* \
+	     | cygwin* | msys* | pe* | moss* | proelf* | rtems* \
+	     | midipix* | mingw32* | mingw64* | mint* \
+	     | uxpv* | beos* | mpeix* | udk* | moxiebox* \
+	     | interix* | uwin* | mks* | rhapsody* | darwin* \
+	     | openstep* | oskit* | conix* | pw32* | nonstopux* \
+	     | storm-chaos* | tops10* | tenex* | tops20* | its* \
+	     | os2* | vos* | palmos* | uclinux* | nucleus* | morphos* \
+	     | scout* | superux* | sysv* | rtmk* | tpf* | windiss* \
+	     | powermax* | dnix* | nx6 | nx7 | sei* | dragonfly* \
+	     | skyos* | haiku* | rdos* | toppers* | drops* | es* \
+	     | onefs* | tirtos* | phoenix* | fuchsia* | redox* | bme* \
+	     | midnightbsd* | amdhsa* | unleashed* | emscripten* | wasi* \
+	     | nsk* | powerunix* | genode* | zvmoe* | qnx* | emx*)
+		;;
+	# This one is extra strict with allowed versions
+	sco3.2v2 | sco3.2v[4-9]* | sco5v6*)
+		# Don't forget version if it is 3.2v4 or newer.
+		;;
+	none)
+		;;
+	*)
+		echo Invalid configuration \`"$1"\': OS \`"$os"\' not recognized 1>&2
+		exit 1
+		;;
+esac
+
+# As a final step for OS-related things, validate the OS-kernel combination
+# (given a valid OS), if there is a kernel.
+case $kernel-$os in
+	linux-gnu* | linux-dietlibc* | linux-android* | linux-newlib* | linux-musl* | linux-uclibc* )
+		;;
+	uclinux-uclibc* )
+		;;
+	-dietlibc* | -newlib* | -musl* | -uclibc* )
+		# These are just libc implementations, not actual OSes, and thus
+		# require a kernel.
+		echo "Invalid configuration \`$1': libc \`$os' needs explicit kernel." 1>&2
+		exit 1
+		;;
+	kfreebsd*-gnu* | kopensolaris*-gnu*)
+		;;
+	nto-qnx*)
+		;;
+	os2-emx)
+		;;
+	*-eabi* | *-gnueabi*)
+		;;
+	-*)
+		# Blank kernel with real OS is always fine.
+		;;
+	*-*)
+		echo "Invalid configuration \`$1': Kernel \`$kernel' not known to work with OS \`$os'." 1>&2
+		exit 1
+		;;
+esac
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer.  We pick the logical manufacturer.
+case $vendor in
+	unknown)
+		case $cpu-$os in
+			*-riscix*)
+				vendor=acorn
+				;;
+			*-sunos*)
+				vendor=sun
+				;;
+			*-cnk* | *-aix*)
+				vendor=ibm
+				;;
+			*-beos*)
+				vendor=be
+				;;
+			*-hpux*)
+				vendor=hp
+				;;
+			*-mpeix*)
+				vendor=hp
+				;;
+			*-hiux*)
+				vendor=hitachi
+				;;
+			*-unos*)
+				vendor=crds
+				;;
+			*-dgux*)
+				vendor=dg
+				;;
+			*-luna*)
+				vendor=omron
+				;;
+			*-genix*)
+				vendor=ns
+				;;
+			*-clix*)
+				vendor=intergraph
+				;;
+			*-mvs* | *-opened*)
+				vendor=ibm
+				;;
+			*-os400*)
+				vendor=ibm
+				;;
+			s390-* | s390x-*)
+				vendor=ibm
+				;;
+			*-ptx*)
+				vendor=sequent
+				;;
+			*-tpf*)
+				vendor=ibm
+				;;
+			*-vxsim* | *-vxworks* | *-windiss*)
+				vendor=wrs
+				;;
+			*-aux*)
+				vendor=apple
+				;;
+			*-hms*)
+				vendor=hitachi
+				;;
+			*-mpw* | *-macos*)
+				vendor=apple
+				;;
+			*-*mint | *-mint[0-9]* | *-*MiNT | *-MiNT[0-9]*)
+				vendor=atari
+				;;
+			*-vos*)
+				vendor=stratus
+				;;
+		esac
+		;;
+esac
+
+echo "$cpu-$vendor-${kernel:+$kernel-}$os"
+exit
+
+# Local variables:
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/support/fixlinks b/support/fixlinks
new file mode 100755
index 0000000..73b0fa3
--- /dev/null
+++ b/support/fixlinks
@@ -0,0 +1,89 @@
+#! /bin/sh
+#
+# fixlinks - make symlinks in the bash source tree so that there is
+#	     exactly one version of any given source file.
+#
+# Copyright (C) 1996-2002 Free Software Foundation, Inc.
+#
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+SRCDIR=.
+while [ $# -gt 0 ]; do
+	case "$1" in
+	-s)	shift; SRCDIR=$1 ;;
+	-u)	unfix=yes ;;
+	-h)	hardlinks=yes ;;
+	-*)	echo "$0: $1: bad option" 1>&2
+		echo "$0: usage: $0 [-hu] [-s srcdir] [linkmap]" 1>&2
+		exit 1;;
+	*)	break ;;
+	esac
+	shift
+done
+
+if [ ! -d $SRCDIR/builtins ]; then
+	echo "$0: must be run with valid -s argument or from source directory" 1>&2
+	exit 1
+fi
+
+if [ $# -eq 0 ]; then
+	linkfile=$SRCDIR/support/SYMLINKS
+else
+	linkfile=$1	
+fi
+
+if [ ! -f "$linkfile" ]; then
+	echo "$0: symlink map file \`$linkfile' does not exist"
+	exit 1
+fi
+
+rm_ltmp=false
+LINKTEMP=`mktemp -t linktmp.XXXXXXXX 2>/dev/null`
+if [ -z "$LINKTEMP" ]; then
+	: ${TMPDIR:=/tmp}
+	LINKTEMP=${TMPDIR}/linktmp.$$
+	rm_ltmp=true
+fi
+
+$rm_ltmp && rm -f ${LINKTEMP}
+# if the user specified hard links, then do that.  otherwise, try to use
+# symlinks if they're present
+if [ -n "$hardlinks" ]; then
+	LN=ln
+elif (ln -s /dev/null ${LINKTEMP}) >/dev/null 2>&1; then
+	LN="ln -s"
+else
+	LN=ln
+fi
+rm -f ${LINKTEMP}
+
+while read name target
+do
+	case "$name" in
+	\#*)	continue;;
+	esac
+
+	rm -f $name
+	case "$unfix" in
+	yes)	dirname=`expr "$name" ':' '^\(.*\)/[^/]*'`
+		[ -z "$dirname" ] && dirname=.
+		cp $dirname/$target $name
+		echo $target copied to $name ;;
+	*)	$LN $target $name ; echo "$name -> $target" ;;
+	esac
+
+done < $linkfile
+
+exit 0
diff --git a/support/install.sh b/support/install.sh
new file mode 100755
index 0000000..0cac004
--- /dev/null
+++ b/support/install.sh
@@ -0,0 +1,247 @@
+#!/bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5.
+#
+# $XConsortium: install.sh,v 1.2 89/12/18 14:47:22 jim Exp $
+#
+# Copyright 1991 by the Massachusetts Institute of Technology
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission.  M.I.T. makes no representations about the
+# suitability of this software for any purpose.  It is provided "as is"
+# without express or implied warranty.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+#
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+tranformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+	-c) instcmd="$cpprog"
+	    shift
+	    continue;;
+
+	-d) dir_arg=true
+	    shift
+	    continue;;
+
+	-m) chmodcmd="$chmodprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-o) chowncmd="$chownprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-g) chgrpcmd="$chgrpprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-s) stripcmd="$stripprog"
+	    shift
+	    continue;;
+
+	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
+	    shift
+	    continue;;
+
+	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+	    shift
+	    continue;;
+
+	*)  if [ x"$src" = x ]
+	    then
+		src=$1
+	    else
+		# this colon is to work around a 386BSD /bin/sh bug
+		:
+		dst=$1
+	    fi
+	    shift
+	    continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+	echo "install:	no input file specified"
+	exit 1
+else
+	true
+fi
+
+if [ x"$dir_arg" != x ]; then
+	dst=$src
+	src=""
+	
+	if [ -d $dst ]; then
+		instcmd=:
+	else
+		instcmd=mkdir
+	fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad 
+# if $src (and thus $dsttmp) contains '*'.
+
+	if [ -f $src -o -d $src ]
+	then
+		true
+	else
+		echo "install:  $src does not exist"
+		exit 1
+	fi
+	
+	if [ x"$dst" = x ]
+	then
+		echo "install:	no destination specified"
+		exit 1
+	else
+		true
+	fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+	if [ -d $dst ]
+	then
+		dst="$dst"/`basename $src`
+	else
+		true
+	fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='	
+'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+	pathcomp="${pathcomp}${1}"
+	shift
+
+	if [ ! -d "${pathcomp}" ] ;
+        then
+		$mkdirprog "${pathcomp}"
+	else
+		true
+	fi
+
+	pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+	$doit $instcmd $dst &&
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+	if [ x"$transformarg" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		dstfile=`basename $dst $transformbasename | 
+			sed $transformarg`$transformbasename
+	fi
+
+# don't allow the sed command to completely eliminate the filename
+
+	if [ x"$dstfile" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		true
+	fi
+
+# Make a temp file name in the proper directory.
+
+	dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+	$doit $instcmd $src $dsttmp &&
+
+	trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+
+# Now rename the file to the real destination.
+
+	$doit $rmcmd -f $dstdir/$dstfile &&
+	$doit $mvcmd $dsttmp $dstdir/$dstfile 
+
+fi &&
+
+
+exit 0
diff --git a/support/man2html.c b/support/man2html.c
new file mode 100644
index 0000000..e6f441b
--- /dev/null
+++ b/support/man2html.c
@@ -0,0 +1,4088 @@
+/*
+ * This program was written by Richard Verhoeven (NL:5482ZX35)
+ * at the Eindhoven University of Technology. Email: rcb5@win.tue.nl
+ *
+ * Permission is granted to distribute, modify and use this program as long
+ * as this comment is not removed or changed.
+ *
+ * THIS IS A MODIFIED VERSION.  IT WAS MODIFIED BY chet@po.cwru.edu FOR
+ * USE BY BASH.
+ */
+
+/*
+ * man2html will add links to the converted manpages. The function add_links
+ * is used for that. At the moment it will add links as follows, where
+ *     indicates what should match to start with:
+ * ^^^
+ * Recognition           Item            Link
+ * ----------------------------------------------------------
+ * name(*)               Manpage         ../man?/name.*
+ *     ^
+ * name@hostname         Email address   mailto:name@hostname
+ *     ^
+ * method://string       URL             method://string
+ *       ^^^
+ * www.host.name         WWW server      http://www.host.name
+ * ^^^^
+ * ftp.host.name         FTP server      ftp://ftp.host.name
+ * ^^^^
+ * <file.h>              Include file    file:/usr/include/file.h
+ *      ^^^
+ *
+ * Since man2html does not check if manpages, hosts or email addresses exist,
+ * some links might not work. For manpages, some extra checks are performed
+ * to make sure not every () pair creates a link. Also out of date pages
+ * might point to incorrect places.
+ *
+ * The program will not allow users to get system specific files, such as
+ * /etc/passwd. It will check that "man" is part of the specified file and
+ * that  "/../" isn't. Even if someone manages to get such file, man2html will
+ * handle it like a manpage and will usually not produce any output (or crash).
+ *
+ * If you find any bugs when normal manpages are converted, please report
+ * them to me (rcb5@win.tue.nl) after you have checked that man(1) can handle
+ * the manpage correct.
+ *
+ * Known bugs and missing features:
+ *
+ *  * Equations are not converted at all.
+ *  * Tables are converted but some features are not possible in html.
+ *  * The tabbing environment is converted by counting characters and adding
+ *    spaces. This might go wrong (outside <PRE>)
+ *  * Some pages look better if man2html works in troff mode, especially pages
+ *    with tables. You can decide at compile time which made you want to use.
+ *
+ *    -DNROFF=0     troff mode
+ *    -DNROFF=1     nroff mode   (default)
+ *
+ *    if you install both modes, you should compile with the correct CGIBASE.
+ *  * Some manpages rely on the fact that troff/nroff is used to convert
+ *    them and use features which are not descripted in the man manpages.
+ *    (definitions, calculations, conditionals, requests). I can't guarantee
+ *    that all these features work on all manpages. (I didn't have the
+ *    time to look through all the available manpages.)
+ */
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#define NROFF 0
+
+#include <unistd.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/stat.h>
+#include <ctype.h>
+#include <sys/types.h>
+#include <time.h>
+#include <sys/time.h>
+#include <errno.h>
+
+#define NULL_TERMINATED(n) ((n) + 1)
+
+#define HUGE_STR_MAX  10000
+#define LARGE_STR_MAX 2000
+#define MED_STR_MAX   500
+#define SMALL_STR_MAX 100
+#define TINY_STR_MAX  10
+
+#define MAX_MAN_PATHS 100	/* Max number of directories */
+#define MAX_ZCATS     10	/* Max number of zcat style programs */
+#define MAX_WORDLIST  100
+
+#ifndef EXIT_SUCCESS
+#define EXIT_SUCCESS 0
+#endif
+#ifndef EXIT_FAILURE
+#define EXIT_FAILURE 1
+#endif
+#ifndef EXIT_USAGE
+#define EXIT_USAGE 2
+#endif
+
+static char location_base[NULL_TERMINATED(MED_STR_MAX)] = "";
+
+static char th_page_and_sec[128] = { '\0' };
+static char th_datestr[128] = { '\0' };
+static char th_version[128] = { '\0' };
+
+char   *signature = "<HR>\nThis document was created by man2html from %s.<BR>\nTime: %s\n";
+
+/* timeformat for signature */
+#define TIMEFORMAT "%d %B %Y %T %Z"
+
+char *manpage;
+
+/* BSD mandoc Bl/El lists to HTML list types */
+#define BL_DESC_LIST   1
+#define BL_BULLET_LIST 2
+#define BL_ENUM_LIST   4
+
+/* BSD mandoc Bd/Ed example(?) blocks */
+#define BD_LITERAL  1
+#define BD_INDENT   2
+
+#ifndef HAVE_STRERROR
+static char *
+strerror(int e)
+{
+	static char emsg[40];
+
+#if defined (HAVE_SYS_ERRLIST)
+	extern int sys_nerr;
+	extern char *sys_errlist[];
+
+	if (e > 0 && e < sys_nerr)
+		return (sys_errlist[e]);
+	else
+#endif				/* HAVE_SYS_ERRLIST */
+	{
+		sprintf(emsg, "Unknown system error %d", e);
+		return (&emsg[0]);
+	}
+}
+#endif				/* !HAVE_STRERROR */
+
+static char *
+strgrow(char *old, int len)
+{
+	char   *new = realloc(old, (strlen(old) + len + 1) * sizeof(char));
+
+	if (!new) {
+		fprintf(stderr, "man2html: out of memory");
+		exit(EXIT_FAILURE);
+	}
+	return new;
+}
+
+static char *
+stralloc(int len)
+{
+	/* allocate enough for len + NULL */
+	char   *new = malloc((len + 1) * sizeof(char));
+
+	if (!new) {
+		fprintf(stderr, "man2html: out of memory");
+		exit(EXIT_FAILURE);
+	}
+	return new;
+}
+
+void *
+xmalloc (size_t size)
+{
+	void *ret;
+
+	ret = malloc (size);
+	if (ret == 0) {
+		fprintf(stderr, "man2html: out of memory");
+		exit(EXIT_FAILURE);
+	}
+	return ret;
+}
+
+/*
+ * Some systems don't have strdup so lets use our own - which can also
+ * check for out of memory.
+ */
+static char *
+strduplicate(char *from)
+{
+	char   *new = stralloc(strlen(from));
+
+	strcpy(new, from);
+	return new;
+}
+
+/* Assumes space for n plus a null */
+static char *
+strmaxcpy(char *to, char *from, int n)
+{
+	int     len = strlen(from);
+
+	strncpy(to, from, n);
+	to[(len <= n) ? len : n] = '\0';
+	return to;
+}
+
+static char *
+strmaxcat(char *to, char *from, int n)
+{
+	int     to_len = strlen(to);
+
+	if (to_len < n) {
+		int     from_len = strlen(from);
+		int     cp = (to_len + from_len <= n) ? from_len : n - to_len;
+
+		strncpy(to + to_len, from, cp);
+		to[to_len + cp] = '\0';
+	}
+	return to;
+}
+
+/* Assumes space for limit plus a null */
+static char *
+strlimitcpy(char *to, char *from, int n, int limit)
+{
+	int     len = n > limit ? limit : n;
+
+	strmaxcpy(to, from, len);
+	to[len] = '\0';
+	return to;
+}
+
+/*
+ * takes string and escapes all metacharacters.  should be used before
+ * including string in system() or similar call.
+ */
+static char *
+escape_input(char *str)
+{
+	int     i, j = 0;
+	static char new[NULL_TERMINATED(MED_STR_MAX)];
+
+	if (strlen(str) * 2 + 1 > MED_STR_MAX) {
+		fprintf(stderr,
+			"man2html: escape_input - str too long:\n%-80s...\n",
+			str);
+		exit(EXIT_FAILURE);
+	}
+	for (i = 0; i < strlen(str); i++) {
+		if (!(((str[i] >= 'A') && (str[i] <= 'Z')) ||
+		      ((str[i] >= 'a') && (str[i] <= 'z')) ||
+		      ((str[i] >= '0') && (str[i] <= '9')))) {
+			new[j] = '\\';
+			j++;
+		}
+		new[j] = str[i];
+		j++;
+	}
+	new[j] = '\0';
+	return new;
+}
+
+static void
+usage(void)
+{
+	fprintf(stderr, "man2html: usage: man2html filename\n");
+}
+
+
+
+/*
+ * below this you should not change anything unless you know a lot
+ * about this program or about troff.
+ */
+
+typedef struct STRDEF STRDEF;
+struct STRDEF {
+	int     nr, slen;
+	char   *st;
+	STRDEF *next;
+};
+
+typedef struct INTDEF INTDEF;
+struct INTDEF {
+	int     nr;
+	int     val;
+	int     incr;
+	INTDEF *next;
+};
+
+static char NEWLINE[2] = "\n";
+static char idxlabel[6] = "ixAAA";
+
+#define INDEXFILE "/tmp/manindex.list"
+
+static char *fname;
+static FILE *idxfile;
+
+static STRDEF *chardef, *strdef, *defdef;
+static INTDEF *intdef;
+
+#define V(A,B) ((A)*256+(B))
+
+static INTDEF standardint[] = {
+	{V('n', ' '), NROFF, 0, NULL},
+	{V('t', ' '), 1 - NROFF, 0, NULL},
+	{V('o', ' '), 1, 0, NULL},
+	{V('e', ' '), 0, 0, NULL},
+	{V('.', 'l'), 70, 0, NULL},
+	{V('.', '$'), 0, 0, NULL},
+	{V('.', 'A'), NROFF, 0, NULL},
+	{V('.', 'T'), 1 - NROFF, 0, NULL},
+	{V('.', 'V'), 1, 0, NULL},	/* the me package tests for this */
+{0, 0, 0, NULL}};
+
+static STRDEF standardstring[] = {
+	{V('R', ' '), 1, "&#174;", NULL},
+	{V('l', 'q'), 2, "``", NULL},
+	{V('r', 'q'), 2, "''", NULL},
+	{0, 0, NULL, NULL}
+};
+
+
+static STRDEF standardchar[] = {
+	{V('*', '*'), 1, "*", NULL},
+	{V('*', 'A'), 1, "A", NULL},
+	{V('*', 'B'), 1, "B", NULL},
+	{V('*', 'C'), 2, "Xi", NULL},
+	{V('*', 'D'), 5, "Delta", NULL},
+	{V('*', 'E'), 1, "E", NULL},
+	{V('*', 'F'), 3, "Phi", NULL},
+	{V('*', 'G'), 5, "Gamma", NULL},
+	{V('*', 'H'), 5, "Theta", NULL},
+	{V('*', 'I'), 1, "I", NULL},
+	{V('*', 'K'), 1, "K", NULL},
+	{V('*', 'L'), 6, "Lambda", NULL},
+	{V('*', 'M'), 1, "M", NULL},
+	{V('*', 'N'), 1, "N", NULL},
+	{V('*', 'O'), 1, "O", NULL},
+	{V('*', 'P'), 2, "Pi", NULL},
+	{V('*', 'Q'), 3, "Psi", NULL},
+	{V('*', 'R'), 1, "P", NULL},
+	{V('*', 'S'), 5, "Sigma", NULL},
+	{V('*', 'T'), 1, "T", NULL},
+	{V('*', 'U'), 1, "Y", NULL},
+	{V('*', 'W'), 5, "Omega", NULL},
+	{V('*', 'X'), 1, "X", NULL},
+	{V('*', 'Y'), 1, "H", NULL},
+	{V('*', 'Z'), 1, "Z", NULL},
+	{V('*', 'a'), 5, "alpha", NULL},
+	{V('*', 'b'), 4, "beta", NULL},
+	{V('*', 'c'), 2, "xi", NULL},
+	{V('*', 'd'), 5, "delta", NULL},
+	{V('*', 'e'), 7, "epsilon", NULL},
+	{V('*', 'f'), 3, "phi", NULL},
+	{V('*', 'g'), 5, "gamma", NULL},
+	{V('*', 'h'), 5, "theta", NULL},
+	{V('*', 'i'), 4, "iota", NULL},
+	{V('*', 'k'), 5, "kappa", NULL},
+	{V('*', 'l'), 6, "lambda", NULL},
+	{V('*', 'm'), 1, "&#181;", NULL},
+	{V('*', 'n'), 2, "nu", NULL},
+	{V('*', 'o'), 1, "o", NULL},
+	{V('*', 'p'), 2, "pi", NULL},
+	{V('*', 'q'), 3, "psi", NULL},
+	{V('*', 'r'), 3, "rho", NULL},
+	{V('*', 's'), 5, "sigma", NULL},
+	{V('*', 't'), 3, "tau", NULL},
+	{V('*', 'u'), 7, "upsilon", NULL},
+	{V('*', 'w'), 5, "omega", NULL},
+	{V('*', 'x'), 3, "chi", NULL},
+	{V('*', 'y'), 3, "eta", NULL},
+	{V('*', 'z'), 4, "zeta", NULL},
+	{V('t', 's'), 5, "sigma", NULL},
+	{V('+', '-'), 1, "&#177;", NULL},
+	{V('1', '2'), 1, "&#189;", NULL},
+	{V('1', '4'), 1, "&#188;", NULL},
+	{V('3', '4'), 1, "&#190;", NULL},
+	{V('F', 'i'), 3, "ffi", NULL},
+	{V('F', 'l'), 3, "ffl", NULL},
+	{V('a', 'a'), 1, "&#180;", NULL},
+	{V('a', 'p'), 1, "~", NULL},
+	{V('b', 'r'), 1, "|", NULL},
+	{V('b', 'u'), 1, "*", NULL},
+	{V('b', 'v'), 1, "|", NULL},
+	{V('c', 'i'), 1, "o", NULL},
+	{V('c', 'o'), 1, "&#169;", NULL},
+	{V('c', 't'), 1, "&#162;", NULL},
+	{V('d', 'e'), 1, "&#176;", NULL},
+	{V('d', 'g'), 1, "+", NULL},
+	{V('d', 'i'), 1, "&#247;", NULL},
+	{V('e', 'm'), 1, "-", NULL},
+	{V('e', 'm'), 3, "---", NULL},
+	{V('e', 'q'), 1, "=", NULL},
+	{V('e', 's'), 1, "&#216;", NULL},
+	{V('f', 'f'), 2, "ff", NULL},
+	{V('f', 'i'), 2, "fi", NULL},
+	{V('f', 'l'), 2, "fl", NULL},
+	{V('f', 'm'), 1, "&#180;", NULL},
+	{V('g', 'a'), 1, "`", NULL},
+	{V('h', 'y'), 1, "-", NULL},
+	{V('l', 'c'), 2, "|&#175;", NULL},
+	{V('l', 'f'), 2, "|_", NULL},
+	{V('l', 'k'), 1, "<FONT SIZE=+2>{</FONT>", NULL},
+	{V('m', 'i'), 1, "-", NULL},
+	{V('m', 'u'), 1, "&#215;", NULL},
+	{V('n', 'o'), 1, "&#172;", NULL},
+	{V('o', 'r'), 1, "|", NULL},
+	{V('p', 'l'), 1, "+", NULL},
+	{V('r', 'c'), 2, "&#175;|", NULL},
+	{V('r', 'f'), 2, "_|", NULL},
+	{V('r', 'g'), 1, "&#174;", NULL},
+	{V('r', 'k'), 1, "<FONT SIZE=+2>}</FONT>", NULL},
+	{V('r', 'n'), 1, "&#175;", NULL},
+	{V('r', 'u'), 1, "_", NULL},
+	{V('s', 'c'), 1, "&#167;", NULL},
+	{V('s', 'l'), 1, "/", NULL},
+	{V('s', 'q'), 2, "[]", NULL},
+	{V('u', 'l'), 1, "_", NULL},
+	{0, 0, NULL, NULL}
+};
+
+/* default: print code */
+
+
+static char eqndelimopen = 0, eqndelimclose = 0;
+static char escapesym = '\\', nobreaksym = '\'', controlsym = '.', fieldsym = 0, padsym = 0;
+
+static char *buffer = NULL;
+static int buffpos = 0, buffmax = 0;
+static int scaninbuff = 0;
+static int itemdepth = 0;
+static int dl_set[20] = {0};
+static int still_dd = 0;
+static int tabstops[20] = {8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96};
+static int maxtstop = 12;
+static int curpos = 0;
+
+static char *scan_troff(char *c, int san, char **result);
+static char *scan_troff_mandoc(char *c, int san, char **result);
+
+static char **argument = NULL;
+
+static char charb[TINY_STR_MAX];
+
+static void
+print_sig(void)
+{
+	char    datbuf[NULL_TERMINATED(MED_STR_MAX)];
+	struct tm *timetm;
+	time_t  clock;
+
+	datbuf[0] = '\0';
+	clock = time(NULL);
+	timetm = localtime(&clock);
+	strftime(datbuf, MED_STR_MAX, TIMEFORMAT, timetm);
+	printf(signature, manpage, datbuf);
+}
+
+static char *
+expand_char(int nr)
+{
+	STRDEF *h;
+
+	h = chardef;
+	if (!nr)
+		return NULL;
+	while (h)
+		if (h->nr == nr) {
+			curpos += h->slen;
+			return h->st;
+		} else
+			h = h->next;
+	charb[0] = nr / 256;
+	charb[1] = nr % 256;
+	charb[2] = '\0';
+	if (charb[0] == '<') {	/* Fix up <= */
+		charb[4] = charb[1];
+		strncpy(charb, "&lt;", 4);
+		charb[5] = '\0';
+	}
+	curpos += 2;
+	return charb;
+}
+
+static char *
+expand_string(int nr)
+{
+	STRDEF *h = strdef;
+
+	if (!nr)
+		return NULL;
+	while (h)
+		if (h->nr == nr) {
+			curpos += h->slen;
+			return h->st;
+		} else
+			h = h->next;
+	return NULL;
+}
+
+static char *
+read_man_page(char *filename)
+{
+	char   *man_buf = NULL;
+	int     i;
+	FILE   *man_stream = NULL;
+	struct stat stbuf;
+	int     buf_size;
+
+	if (stat(filename, &stbuf) == -1)
+		return NULL;
+
+	buf_size = stbuf.st_size;
+	man_buf = stralloc(buf_size + 5);
+	man_stream = fopen(filename, "r");
+	if (man_stream) {
+		man_buf[0] = '\n';
+		if (fread(man_buf + 1, 1, buf_size, man_stream) == buf_size) {
+			man_buf[buf_size] = '\n';
+			man_buf[buf_size + 1] = man_buf[buf_size + 2] = '\0';
+		} else {
+			free(man_buf);
+			man_buf = NULL;
+		}
+		fclose(man_stream);
+	}
+	return man_buf;
+}
+
+
+static char outbuffer[NULL_TERMINATED(HUGE_STR_MAX)];
+static int obp = 0;
+static int no_newline_output = 0;
+static int newline_for_fun = 0;
+static int output_possible = 0;
+static int out_length = 0;
+
+/*
+ * Add the links to the output. At the moment the following are
+ * recognized:
+ * 
+#if 0
+ *	name(*)                 -> ../man?/name.*
+#endif
+ *	method://string         -> method://string
+ *	www.host.name		-> http://www.host.name
+ *	ftp.host.name           -> ftp://ftp.host.name
+ *	name@host               -> mailto:name@host
+ *	<name.h>                -> file:/usr/include/name.h   (guess)
+ * 
+ * Other possible links to add in the future:
+ * 
+ * /dir/dir/file  -> file:/dir/dir/file
+ */
+static void
+add_links(char *c)
+{
+	int     i, j, nr;
+	char   *f, *g, *h;
+	char   *idtest[6];	/* url, mailto, www, ftp, manpage */
+
+	out_length += strlen(c);
+	/* search for (section) */
+	nr = 0;
+	idtest[0] = strstr(c + 1, "://");
+	idtest[1] = strchr(c + 1, '@');
+	idtest[2] = strstr(c, "www.");
+	idtest[3] = strstr(c, "ftp.");
+#if 0
+	idtest[4] = strchr(c + 1, '(');
+#else
+	idtest[4] = 0;
+#endif
+	idtest[5] = strstr(c + 1, ".h&gt;");
+	for (i = 0; i < 6; i++)
+		nr += (idtest[i] != NULL);
+	while (nr) {
+		j = -1;
+		for (i = 0; i < 6; i++)
+			if (idtest[i] && (j < 0 || idtest[i] < idtest[j]))
+				j = i;
+		switch (j) {
+		case 5:	/* <name.h> */
+			f = idtest[5];
+			h = f + 2;
+			g = f;
+			while (g > c && g[-1] != ';')
+				g--;
+			if (g != c) {
+				char    t;
+
+				t = *g;
+				*g = '\0';
+				fputs(c, stdout);
+				*g = t;
+				*h = '\0';
+				printf("<A HREF=\"file:/usr/include/%s\">%s</A>&gt;", g, g);
+				c = f + 6;
+			} else {
+				f[5] = '\0';
+				fputs(c, stdout);
+				f[5] = ';';
+				c = f + 5;
+			}
+			break;
+		case 4:	/* manpage */
+#if 0
+			f = idtest[j];
+			/* check section */
+			g = strchr(f, ')');
+			if (g && f - g < 6 && (isalnum(f[-1]) || f[-1] == '>') &&
+			    ((isdigit(f[1]) && f[1] != '0' &&
+			      (f[2] == ')' || (isalpha(f[2]) && f[3] == ')') || f[2] == 'X')) ||
+			   (f[2] == ')' && (f[1] == 'n' || f[1] == 'l')))) {
+				/* this might be a link */
+				h = f - 1;
+				/* skip html makeup */
+				while (h > c && *h == '>') {
+					while (h != c && *h != '<')
+						h--;
+					if (h != c)
+						h--;
+				}
+				if (isalnum(*h)) {
+					char    t, sec, subsec, *e;
+
+					e = h + 1;
+					sec = f[1];
+					subsec = f[2];
+					if ((subsec == 'X' && f[3] != ')') || subsec == ')')
+						subsec = '\0';
+					while (h > c && (isalnum(h[-1]) || h[-1] == '_' ||
+					      h[-1] == '-' || h[-1] == '.'))
+						h--;
+					t = *h;
+					*h = '\0';
+					fputs(c, stdout);
+					*h = t;
+					t = *e;
+					*e = '\0';
+					if (subsec)
+						printf("<A HREF=\""
+						       CGIBASE
+						  "?man%c/%s.%c%c\">%s</A>",
+						       sec, h, sec, tolower(subsec), h);
+					else
+						printf("<A HREF=\""
+						       CGIBASE
+						    "?man%c/%s.%c\">%s</A>",
+						       sec, h, sec, h);
+					*e = t;
+					c = e;
+				}
+			}
+			*f = '\0';
+			fputs(c, stdout);
+			*f = '(';
+			idtest[4] = f - 1;
+			c = f;
+#endif
+			break;	/* manpage */
+		case 3:	/* ftp */
+		case 2:	/* www */
+			g = f = idtest[j];
+			while (*g && (isalnum(*g) || *g == '_' || *g == '-' || *g == '+' ||
+				      *g == '.'))
+				g++;
+			if (g[-1] == '.')
+				g--;
+			if (g - f > 4) {
+				char    t;
+
+				t = *f;
+				*f = '\0';
+				fputs(c, stdout);
+				*f = t;
+				t = *g;
+				*g = '\0';
+				printf("<A HREF=\"%s://%s\">%s</A>", (j == 3 ? "ftp" : "http"),
+				       f, f);
+				*g = t;
+				c = g;
+			} else {
+				f[3] = '\0';
+				fputs(c, stdout);
+				c = f + 3;
+				f[3] = '.';
+			}
+			break;
+		case 1:	/* mailto */
+			g = f = idtest[1];
+			while (g > c && (isalnum(g[-1]) || g[-1] == '_' || g[-1] == '-' ||
+			      g[-1] == '+' || g[-1] == '.' || g[-1] == '%'))
+				g--;
+			h = f + 1;
+			while (*h && (isalnum(*h) || *h == '_' || *h == '-' || *h == '+' ||
+				      *h == '.'))
+				h++;
+			if (*h == '.')
+				h--;
+			if (h - f > 4 && f - g > 1) {
+				char    t;
+
+				t = *g;
+				*g = '\0';
+				fputs(c, stdout);
+				*g = t;
+				t = *h;
+				*h = '\0';
+				printf("<A HREF=\"mailto:%s\">%s</A>", g, g);
+				*h = t;
+				c = h;
+			} else {
+				*f = '\0';
+				fputs(c, stdout);
+				*f = '@';
+				idtest[1] = c;
+				c = f;
+			}
+			break;
+		case 0:	/* url */
+			g = f = idtest[0];
+			while (g > c && isalpha(g[-1]) && islower(g[-1]))
+				g--;
+			h = f + 3;
+			while (*h && !isspace(*h) && *h != '<' && *h != '>' && *h != '"' &&
+			       *h != '&')
+				h++;
+			if (f - g > 2 && f - g < 7 && h - f > 3) {
+				char    t;
+
+				t = *g;
+				*g = '\0';
+				fputs(c, stdout);
+				*g = t;
+				t = *h;
+				*h = '\0';
+				printf("<A HREF=\"%s\">%s</A>", g, g);
+				*h = t;
+				c = h;
+			} else {
+				f[1] = '\0';
+				fputs(c, stdout);
+				f[1] = '/';
+				c = f + 1;
+			}
+			break;
+		default:
+			break;
+		}
+		nr = 0;
+		if (idtest[0] && idtest[0] < c)
+			idtest[0] = strstr(c + 1, "://");
+		if (idtest[1] && idtest[1] < c)
+			idtest[1] = strchr(c + 1, '@');
+		if (idtest[2] && idtest[2] < c)
+			idtest[2] = strstr(c, "www.");
+		if (idtest[3] && idtest[3] < c)
+			idtest[3] = strstr(c, "ftp.");
+		if (idtest[4] && idtest[4] < c)
+			idtest[4] = strchr(c + 1, '(');
+		if (idtest[5] && idtest[5] < c)
+			idtest[5] = strstr(c + 1, ".h&gt;");
+		for (i = 0; i < 6; i++)
+			nr += (idtest[i] != NULL);
+	}
+	fputs(c, stdout);
+}
+
+static int current_font = 0;
+static int current_size = 0;
+static int fillout = 1;
+
+static void
+out_html(char *c)
+{
+	if (!c)
+		return;
+	if (no_newline_output) {
+		int     i = 0;
+
+		no_newline_output = 1;
+		while (c[i]) {
+			if (!no_newline_output)
+				c[i - 1] = c[i];
+			if (c[i] == '\n')
+				no_newline_output = 1;
+			i++;
+		}
+		if (!no_newline_output)
+			c[i - 1] = 0;
+	}
+	if (scaninbuff) {
+		while (*c) {
+			if (buffpos >= buffmax) {
+				char   *h;
+
+				h = realloc(buffer, buffmax * 2);
+				if (!h)
+					return;
+				buffer = h;
+				buffmax *= 2;
+			}
+			buffer[buffpos++] = *c++;
+		}
+	} else if (output_possible) {
+		while (*c) {
+			outbuffer[obp++] = *c;
+			if (*c == '\n' || obp > HUGE_STR_MAX) {
+				outbuffer[obp] = '\0';
+				add_links(outbuffer);
+				obp = 0;
+			}
+			c++;
+		}
+	}
+}
+
+#define FO0 ""
+#define FC0 ""
+#define FO1 "<I>"
+#define FC1 "</I>"
+#define FO2 "<B>"
+#define FC2 "</B>"
+#define FO3 "<TT>"
+#define FC3 "</TT>"
+
+static char *switchfont[16] = {
+	"", FC0 FO1, FC0 FO2, FC0 FO3,
+	FC1 FO0, "", FC1 FO2, FC1 FO3,
+	FC2 FO0, FC2 FO1, "", FC2 FO3,
+	FC3 FO0, FC3 FO1, FC3 FO2, ""
+};
+
+static char *
+change_to_font(int nr)
+{
+	int     i;
+
+	switch (nr) {
+	case '0':
+		nr++;
+	case '1':
+	case '2':
+	case '3':
+	case '4':
+		nr = nr - '1';
+		break;
+	case V('C', 'W'):
+		nr = 3;
+		break;
+	case 'L':
+		nr = 3;
+		break;
+	case 'B':
+		nr = 2;
+		break;
+	case 'I':
+		nr = 1;
+		break;
+	case 'P':
+	case 'R':
+		nr = 0;
+		break;
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+		break;
+	default:
+		nr = 0;
+		break;
+	}
+	i = current_font * 4 + nr % 4;
+	current_font = nr % 4;
+	return switchfont[i];
+}
+
+static char sizebuf[200];
+
+static char *
+change_to_size(int nr)
+{
+	int     i;
+
+	switch (nr) {
+	case '0':
+	case '1':
+	case '2':
+	case '3':
+	case '4':
+	case '5':
+	case '6':
+	case '7':
+	case '8':
+	case '9':
+		nr = nr - '0';
+		break;
+	case '\0':
+		break;
+	default:
+		nr = current_size + nr;
+		if (nr > 9)
+			nr = 9;
+		if (nr < -9)
+			nr = -9;
+		break;
+	}
+	if (nr == current_size)
+		return "";
+	i = current_font;
+	sizebuf[0] = '\0';
+	strcat(sizebuf, change_to_font(0));
+	if (current_size)
+		strcat(sizebuf, "</FONT>");
+	current_size = nr;
+	if (nr) {
+		int     l;
+
+		strcat(sizebuf, "<FONT SIZE=");
+		l = strlen(sizebuf);
+		if (nr > 0)
+			sizebuf[l++] = '+';
+		else
+			sizebuf[l++] = '-', nr = -nr;
+		sizebuf[l++] = nr + '0';
+		sizebuf[l++] = '>';
+		sizebuf[l] = '\0';
+	}
+	strcat(sizebuf, change_to_font(i));
+	return sizebuf;
+}
+
+static int asint = 0;
+static int intresult = 0;
+
+#define SKIPEOL while (*c && *c++!='\n')
+
+static int skip_escape = 0;
+static int single_escape = 0;
+
+static char *
+scan_escape(char *c)
+{
+	char   *h = NULL;
+	char    b[5];
+	INTDEF *intd;
+	int     exoutputp, exskipescape;
+	int     i, j;
+
+	intresult = 0;
+	switch (*c) {
+	case 'e':
+		h = "\\";
+		curpos++;
+		break;
+	case '0':
+	case ' ':
+		h = "&nbsp;";
+		curpos++;
+		break;
+	case '|':
+		h = "";
+		break;
+	case '"':
+		SKIPEOL;
+		c--;
+		h = "";
+		break;
+	case '$':
+		if (argument) {
+			c++;
+			i = (*c - '1');
+			if (!(h = argument[i]))
+				h = "";
+		}
+		break;
+	case 'z':
+		c++;
+		if (*c == '\\') {
+			c = scan_escape(c + 1);
+			c--;
+			h = "";
+		} else {
+			b[0] = *c;
+			b[1] = '\0';
+			h = "";
+		}
+		break;
+	case 'k':
+		c++;
+		if (*c == '(')
+			c += 2;
+	case '^':
+	case '!':
+	case '%':
+	case 'a':
+	case 'd':
+	case 'r':
+	case 'u':
+	case '\n':
+	case '&':
+		h = "";
+		break;
+	case '(':
+		c++;
+		i = c[0] * 256 + c[1];
+		c++;
+		h = expand_char(i);
+		break;
+	case '*':
+		c++;
+		if (*c == '(') {
+			c++;
+			i = c[0] * 256 + c[1];
+			c++;
+		} else
+			i = *c * 256 + ' ';
+		h = expand_string(i);
+		break;
+	case 'f':
+		c++;
+		if (*c == '\\') {
+			c++;
+			c = scan_escape(c);
+			c--;
+			i = intresult;
+		} else if (*c != '(')
+			i = *c;
+		else {
+			c++;
+			i = c[0] * 256 + c[1];
+			c++;
+		}
+		if (!skip_escape)
+			h = change_to_font(i);
+		else
+			h = "";
+		break;
+	case 's':
+		c++;
+		j = 0;
+		i = 0;
+		if (*c == '-') {
+			j = -1;
+			c++;
+		} else if (*c == '+') {
+			j = 1;
+			c++;
+		}
+		if (*c == '0')
+			c++;
+		else if (*c == '\\') {
+			c++;
+			c = scan_escape(c);
+			i = intresult;
+			if (!j)
+				j = 1;
+		} else
+			while (isdigit(*c) && (!i || (!j && i < 4)))
+				i = i * 10 + (*c++) - '0';
+		if (!j) {
+			j = 1;
+			if (i)
+				i = i - 10;
+		}
+		if (!skip_escape)
+			h = change_to_size(i * j);
+		else
+			h = "";
+		c--;
+		break;
+	case 'n':
+		c++;
+		j = 0;
+		switch (*c) {
+		case '+':
+			j = 1;
+			c++;
+			break;
+		case '-':
+			j = -1;
+			c++;
+			break;
+		default:
+			break;
+		}
+		if (*c == '(') {
+			c++;
+			i = V(c[0], c[1]);
+			c = c + 1;
+		} else {
+			i = V(c[0], ' ');
+		}
+		intd = intdef;
+		while (intd && intd->nr != i)
+			intd = intd->next;
+		if (intd) {
+			intd->val = intd->val + j * intd->incr;
+			intresult = intd->val;
+		} else {
+			switch (i) {
+			case V('.', 's'):
+				intresult = current_size;
+				break;
+			case V('.', 'f'):
+				intresult = current_font;
+				break;
+			default:
+				intresult = 0;
+				break;
+			}
+		}
+		h = "";
+		break;
+	case 'w':
+		c++;
+		i = *c;
+		c++;
+		exoutputp = output_possible;
+		exskipescape = skip_escape;
+		output_possible = 0;
+		skip_escape = 1;
+		j = 0;
+		while (*c != i) {
+			j++;
+			if (*c == escapesym)
+				c = scan_escape(c + 1);
+			else
+				c++;
+		}
+		output_possible = exoutputp;
+		skip_escape = exskipescape;
+		intresult = j;
+		break;
+	case 'l':
+		h = "<HR>";
+		curpos = 0;
+	case 'b':
+	case 'v':
+	case 'x':
+	case 'o':
+	case 'L':
+	case 'h':
+		c++;
+		i = *c;
+		c++;
+		exoutputp = output_possible;
+		exskipescape = skip_escape;
+		output_possible = 0;
+		skip_escape = 1;
+		while (*c != i)
+			if (*c == escapesym)
+				c = scan_escape(c + 1);
+			else
+				c++;
+		output_possible = exoutputp;
+		skip_escape = exskipescape;
+		break;
+	case 'c':
+		no_newline_output = 1;
+		break;
+	case '{':
+		newline_for_fun++;
+		h = "";
+		break;
+	case '}':
+		if (newline_for_fun)
+			newline_for_fun--;
+		h = "";
+		break;
+	case 'p':
+		h = "<BR>\n";
+		curpos = 0;
+		break;
+	case 't':
+		h = "\t";
+		curpos = (curpos + 8) & 0xfff8;
+		break;
+	case '<':
+		h = "&lt;";
+		curpos++;
+		break;
+	case '>':
+		h = "&gt;";
+		curpos++;
+		break;
+	case '\\':
+		if (single_escape) {
+			c--;
+			break;
+		}
+	default:
+		b[0] = *c;
+		b[1] = 0;
+		h = b;
+		curpos++;
+		break;
+	}
+	c++;
+	if (!skip_escape)
+		out_html(h);
+	return c;
+}
+
+typedef struct TABLEITEM TABLEITEM;
+
+struct TABLEITEM {
+	char   *contents;
+	int     size, align, valign, colspan, rowspan, font, vleft, vright, space,
+	        width;
+	TABLEITEM *next;
+};
+
+static TABLEITEM emptyfield = {NULL, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, NULL};
+
+typedef struct TABLEROW TABLEROW;
+
+struct TABLEROW {
+	TABLEITEM *first;
+	TABLEROW *prev, *next;
+};
+
+static char *tableopt[] = {
+	"center", "expand", "box", "allbox", "doublebox",
+	"tab", "linesize", "delim", NULL
+};
+static int tableoptl[] = {6, 6, 3, 6, 9, 3, 8, 5, 0};
+
+static void
+clear_table(TABLEROW * table)
+{
+	TABLEROW *tr1, *tr2;
+	TABLEITEM *ti1, *ti2;
+
+	tr1 = table;
+	while (tr1->prev)
+		tr1 = tr1->prev;
+	while (tr1) {
+		ti1 = tr1->first;
+		while (ti1) {
+			ti2 = ti1->next;
+			if (ti1->contents)
+				free(ti1->contents);
+			free(ti1);
+			ti1 = ti2;
+		}
+		tr2 = tr1;
+		tr1 = tr1->next;
+		free(tr2);
+	}
+}
+
+static char *scan_expression(char *c, int *result);
+
+static char *
+scan_format(char *c, TABLEROW ** result, int *maxcol)
+{
+	TABLEROW *layout, *currow;
+	TABLEITEM *curfield;
+	int     i, j;
+
+	if (*result) {
+		clear_table(*result);
+	}
+	layout = currow = (TABLEROW *) xmalloc(sizeof(TABLEROW));
+	currow->next = currow->prev = NULL;
+	currow->first = curfield = (TABLEITEM *) xmalloc(sizeof(TABLEITEM));
+	*curfield = emptyfield;
+	while (*c && *c != '.') {
+		switch (*c) {
+		case 'C':
+		case 'c':
+		case 'N':
+		case 'n':
+		case 'R':
+		case 'r':
+		case 'A':
+		case 'a':
+		case 'L':
+		case 'l':
+		case 'S':
+		case 's':
+		case '^':
+		case '_':
+			if (curfield->align) {
+				curfield->next = (TABLEITEM *) xmalloc(sizeof(TABLEITEM));
+				curfield = curfield->next;
+				*curfield = emptyfield;
+			}
+			curfield->align = toupper(*c);
+			c++;
+			break;
+		case 'i':
+		case 'I':
+		case 'B':
+		case 'b':
+			curfield->font = toupper(*c);
+			c++;
+			break;
+		case 'f':
+		case 'F':
+			c++;
+			curfield->font = toupper(*c);
+			c++;
+			if (!isspace(*c))
+				c++;
+			break;
+		case 't':
+		case 'T':
+			curfield->valign = 't';
+			c++;
+			break;
+		case 'p':
+		case 'P':
+			c++;
+			i = j = 0;
+			if (*c == '+') {
+				j = 1;
+				c++;
+			}
+			if (*c == '-') {
+				j = -1;
+				c++;
+			}
+			while (isdigit(*c))
+				i = i * 10 + (*c++) - '0';
+			if (j)
+				curfield->size = i * j;
+			else
+				curfield->size = j - 10;
+			break;
+		case 'v':
+		case 'V':
+		case 'w':
+		case 'W':
+			c = scan_expression(c + 2, &curfield->width);
+			break;
+		case '|':
+			if (curfield->align)
+				curfield->vleft++;
+			else
+				curfield->vright++;
+			c++;
+			break;
+		case 'e':
+		case 'E':
+			c++;
+			break;
+		case '0':
+		case '1':
+		case '2':
+		case '3':
+		case '4':
+		case '5':
+		case '6':
+		case '7':
+		case '8':
+		case '9':
+			i = 0;
+			while (isdigit(*c))
+				i = i * 10 + (*c++) - '0';
+			curfield->space = i;
+			break;
+		case ',':
+		case '\n':
+			currow->next = (TABLEROW *) xmalloc(sizeof(TABLEROW));
+			currow->next->prev = currow;
+			currow = currow->next;
+			currow->next = NULL;
+			curfield = currow->first = (TABLEITEM *) xmalloc(sizeof(TABLEITEM));
+			*curfield = emptyfield;
+			c++;
+			break;
+		default:
+			c++;
+			break;
+		}
+	}
+	if (*c == '.')
+		while (*c++ != '\n');
+	*maxcol = 0;
+	currow = layout;
+	while (currow) {
+		curfield = layout->first;
+		i = 0;
+		while (curfield) {
+			i++;
+			curfield = curfield->next;
+		}
+		if (i > *maxcol)
+			*maxcol = i;
+		currow = currow->next;
+	}
+	*result = layout;
+	return c;
+}
+
+static TABLEROW *
+next_row(TABLEROW * tr)
+{
+	if (tr->next) {
+		tr = tr->next;
+		if (!tr->next)
+			next_row(tr);
+		return tr;
+	} else {
+		TABLEITEM *ti, *ti2;
+
+		tr->next = (TABLEROW *) xmalloc(sizeof(TABLEROW));
+		tr->next->prev = tr;
+		ti = tr->first;
+		tr = tr->next;
+		tr->next = NULL;
+		if (ti)
+			tr->first = ti2 = (TABLEITEM *) xmalloc(sizeof(TABLEITEM));
+		else
+			tr->first = ti2 = NULL;
+		while (ti != ti2) {
+			*ti2 = *ti;
+			ti2->contents = NULL;
+			if ((ti = ti->next)) {
+				ti2->next = (TABLEITEM *) xmalloc(sizeof(TABLEITEM));
+			}
+			ti2 = ti2->next;
+		}
+		return tr;
+	}
+}
+
+static char itemreset[20] = "\\fR\\s0";
+
+static char *
+scan_table(char *c)
+{
+	char   *t, *h, *g;
+	int     center = 0, expand = 0, box = 0, border = 0, linesize = 1;
+	int     i, j, maxcol = 0, finished = 0;
+	int     oldfont, oldsize, oldfillout;
+	char    itemsep = '\t';
+	TABLEROW *layout = NULL, *currow, *ftable;
+	TABLEITEM *curfield;
+
+	while (*c++ != '\n');
+	h = c;
+	if (*h == '.')
+		return c - 1;
+	oldfont = current_font;
+	oldsize = current_size;
+	oldfillout = fillout;
+	out_html(change_to_font(0));
+	out_html(change_to_size(0));
+	if (!fillout) {
+		fillout = 1;
+		out_html("</PRE>");
+	}
+	while (*h && *h != '\n')
+		h++;
+	if (h[-1] == ';') {
+		/* scan table options */
+		while (c < h) {
+			while (isspace(*c))
+				c++;
+			for (i = 0; tableopt[i] && strncmp(tableopt[i], c, tableoptl[i]); i++);
+			c = c + tableoptl[i];
+			switch (i) {
+			case 0:
+				center = 1;
+				break;
+			case 1:
+				expand = 1;
+				break;
+			case 2:
+				box = 1;
+				break;
+			case 3:
+				border = 1;
+				break;
+			case 4:
+				box = 2;
+				break;
+			case 5:
+				while (*c++ != '(');
+				itemsep = *c++;
+				break;
+			case 6:
+				while (*c++ != '(');
+				linesize = 0;
+				while (isdigit(*c))
+					linesize = linesize * 10 + (*c++) - '0';
+				break;
+			case 7:
+				while (*c != ')')
+					c++;
+			default:
+				break;
+			}
+			c++;
+		}
+		c = h + 1;
+	}
+	/* scan layout */
+	c = scan_format(c, &layout, &maxcol);
+	currow = layout;
+	next_row(currow);
+	curfield = layout->first;
+	i = 0;
+	while (!finished) {
+		/* search item */
+		h = c;
+		if ((*c == '_' || *c == '=') && (c[1] == itemsep || c[1] == '\n')) {
+			if (c[-1] == '\n' && c[1] == '\n') {
+				if (currow->prev) {
+					currow->prev->next = (TABLEROW *) xmalloc(sizeof(TABLEROW));
+					currow->prev->next->next = currow;
+					currow->prev->next->prev = currow->prev;
+					currow->prev = currow->prev->next;
+				} else {
+					currow->prev = layout = (TABLEROW *) xmalloc(sizeof(TABLEROW));
+					currow->prev->prev = NULL;
+					currow->prev->next = currow;
+				}
+				curfield = currow->prev->first =
+					(TABLEITEM *) xmalloc(sizeof(TABLEITEM));
+				*curfield = emptyfield;
+				curfield->align = *c;
+				curfield->colspan = maxcol;
+				curfield = currow->first;
+				c = c + 2;
+			} else {
+				if (curfield) {
+					curfield->align = *c;
+					do {
+						curfield = curfield->next;
+					} while (curfield && curfield->align == 'S');
+				}
+				if (c[1] == '\n') {
+					currow = next_row(currow);
+					curfield = currow->first;
+				}
+				c = c + 2;
+			}
+		} else if (*c == 'T' && c[1] == '{') {
+			h = c + 2;
+			c = strstr(h, "\nT}");
+			c++;
+			*c = '\0';
+			g = NULL;
+			scan_troff(h, 0, &g);
+			scan_troff(itemreset, 0, &g);
+			*c = 'T';
+			c += 3;
+			if (curfield) {
+				curfield->contents = g;
+				do {
+					curfield = curfield->next;
+				} while (curfield && curfield->align == 'S');
+			} else if (g)
+				free(g);
+			if (c[-1] == '\n') {
+				currow = next_row(currow);
+				curfield = currow->first;
+			}
+		} else if (*c == '.' && c[1] == 'T' && c[2] == '&' && c[-1] == '\n') {
+			TABLEROW *hr;
+
+			while (*c++ != '\n');
+			hr = currow;
+			currow = currow->prev;
+			hr->prev = NULL;
+			c = scan_format(c, &hr, &i);
+			hr->prev = currow;
+			currow->next = hr;
+			currow = hr;
+			next_row(currow);
+			curfield = currow->first;
+		} else if (*c == '.' && c[1] == 'T' && c[2] == 'E' && c[-1] == '\n') {
+			finished = 1;
+			while (*c++ != '\n');
+			if (currow->prev)
+				currow->prev->next = NULL;
+			currow->prev = NULL;
+			clear_table(currow);
+		} else if (*c == '.' && c[-1] == '\n' && !isdigit(c[1])) {
+			/*
+			 * skip troff request inside table (usually only .sp
+			 * )
+			 */
+			while (*c++ != '\n');
+		} else {
+			h = c;
+			while (*c && (*c != itemsep || c[-1] == '\\') &&
+			       (*c != '\n' || c[-1] == '\\'))
+				c++;
+			i = 0;
+			if (*c == itemsep) {
+				i = 1;
+				*c = '\n';
+			}
+			if (h[0] == '\\' && h[2] == '\n' &&
+			    (h[1] == '_' || h[1] == '^')) {
+				if (curfield) {
+					curfield->align = h[1];
+					do {
+						curfield = curfield->next;
+					} while (curfield && curfield->align == 'S');
+				}
+				h = h + 3;
+			} else {
+				g = NULL;
+				h = scan_troff(h, 1, &g);
+				scan_troff(itemreset, 0, &g);
+				if (curfield) {
+					curfield->contents = g;
+					do {
+						curfield = curfield->next;
+					} while (curfield && curfield->align == 'S');
+				} else if (g)
+					free(g);
+			}
+			if (i)
+				*c = itemsep;
+			c = h;
+			if (c[-1] == '\n') {
+				currow = next_row(currow);
+				curfield = currow->first;
+			}
+		}
+	}
+	/* calculate colspan and rowspan */
+	currow = layout;
+	while (currow->next)
+		currow = currow->next;
+	while (currow) {
+		TABLEITEM *ti, *ti1 = NULL, *ti2 = NULL;
+
+		ti = currow->first;
+		if (currow->prev)
+			ti1 = currow->prev->first;
+		while (ti) {
+			switch (ti->align) {
+			case 'S':
+				if (ti2) {
+					ti2->colspan++;
+					if (ti2->rowspan < ti->rowspan)
+						ti2->rowspan = ti->rowspan;
+				}
+				break;
+			case '^':
+				if (ti1)
+					ti1->rowspan++;
+			default:
+				if (!ti2)
+					ti2 = ti;
+				else {
+					do {
+						ti2 = ti2->next;
+					} while (ti2 && curfield->align == 'S');
+				}
+				break;
+			}
+			ti = ti->next;
+			if (ti1)
+				ti1 = ti1->next;
+		}
+		currow = currow->prev;
+	}
+	/* produce html output */
+	if (center)
+		out_html("<CENTER>");
+	if (box == 2)
+		out_html("<TABLE BORDER><TR><TD>");
+	out_html("<TABLE");
+	if (box || border) {
+		out_html(" BORDER");
+		if (!border)
+			out_html("><TR><TD><TABLE");
+		if (expand)
+			out_html(" WIDTH=100%");
+	}
+	out_html(">\n");
+	currow = layout;
+	while (currow) {
+		j = 0;
+		out_html("<TR VALIGN=top>");
+		curfield = currow->first;
+		while (curfield) {
+			if (curfield->align != 'S' && curfield->align != '^') {
+				out_html("<TD");
+				switch (curfield->align) {
+				case 'N':
+					curfield->space += 4;
+				case 'R':
+					out_html(" ALIGN=right");
+					break;
+				case 'C':
+					out_html(" ALIGN=center");
+				default:
+					break;
+				}
+				if (!curfield->valign && curfield->rowspan > 1)
+					out_html(" VALIGN=center");
+				if (curfield->colspan > 1) {
+					char    buf[5];
+
+					out_html(" COLSPAN=");
+					sprintf(buf, "%i", curfield->colspan);
+					out_html(buf);
+				}
+				if (curfield->rowspan > 1) {
+					char    buf[5];
+
+					out_html(" ROWSPAN=");
+					sprintf(buf, "%i", curfield->rowspan);
+					out_html(buf);
+				}
+				j = j + curfield->colspan;
+				out_html(">");
+				if (curfield->size)
+					out_html(change_to_size(curfield->size));
+				if (curfield->font)
+					out_html(change_to_font(curfield->font));
+				switch (curfield->align) {
+				case '=':
+					out_html("<HR><HR>");
+					break;
+				case '_':
+					out_html("<HR>");
+					break;
+				default:
+					if (curfield->contents)
+						out_html(curfield->contents);
+					break;
+				}
+				if (curfield->space)
+					for (i = 0; i < curfield->space; i++)
+						out_html("&nbsp;");
+				if (curfield->font)
+					out_html(change_to_font(0));
+				if (curfield->size)
+					out_html(change_to_size(0));
+				if (j >= maxcol && curfield->align > '@' && curfield->align != '_')
+					out_html("<BR>");
+				out_html("</TD>");
+			}
+			curfield = curfield->next;
+		}
+		out_html("</TR>\n");
+		currow = currow->next;
+	}
+	if (box && !border)
+		out_html("</TABLE>");
+	out_html("</TABLE>");
+	if (box == 2)
+		out_html("</TABLE>");
+	if (center)
+		out_html("</CENTER>\n");
+	else
+		out_html("\n");
+	if (!oldfillout)
+		out_html("<PRE>");
+	fillout = oldfillout;
+	out_html(change_to_size(oldsize));
+	out_html(change_to_font(oldfont));
+	return c;
+}
+
+static char *
+scan_expression(char *c, int *result)
+{
+	int     value = 0, value2, j = 0, sign = 1, opex = 0;
+	char    oper = 'c';
+
+	if (*c == '!') {
+		c = scan_expression(c + 1, &value);
+		value = (!value);
+	} else if (*c == 'n') {
+		c++;
+		value = NROFF;
+	} else if (*c == 't') {
+		c++;
+		value = 1 - NROFF;
+	} else if (*c == '\'' || *c == '"' || *c < ' ' || (*c == '\\' && c[1] == '(')) {
+		/*
+		 * ?string1?string2? test if string1 equals string2.
+		 */
+		char   *st1 = NULL, *st2 = NULL, *h;
+		char   *tcmp = NULL;
+		char    sep;
+
+		sep = *c;
+		if (sep == '\\') {
+			tcmp = c;
+			c = c + 3;
+		}
+		c++;
+		h = c;
+		while (*c != sep && (!tcmp || strncmp(c, tcmp, 4)))
+			c++;
+		*c = '\n';
+		scan_troff(h, 1, &st1);
+		*c = sep;
+		if (tcmp)
+			c = c + 3;
+		c++;
+		h = c;
+		while (*c != sep && (!tcmp || strncmp(c, tcmp, 4)))
+			c++;
+		*c = '\n';
+		scan_troff(h, 1, &st2);
+		*c = sep;
+		if (!st1 && !st2)
+			value = 1;
+		else if (!st1 || !st2)
+			value = 0;
+		else
+			value = (!strcmp(st1, st2));
+		if (st1)
+			free(st1);
+		if (st2)
+			free(st2);
+		if (tcmp)
+			c = c + 3;
+		c++;
+	} else {
+		while (*c && !isspace(*c) && *c != ')') {
+			opex = 0;
+			switch (*c) {
+			case '(':
+				c = scan_expression(c + 1, &value2);
+				value2 = sign * value2;
+				opex = 1;
+				break;
+			case '.':
+			case '0':
+			case '1':
+			case '2':
+			case '3':
+			case '4':
+			case '5':
+			case '6':
+			case '7':
+			case '8':
+			case '9':{
+					int     num = 0, denum = 1;
+
+					value2 = 0;
+					while (isdigit(*c))
+						value2 = value2 * 10 + ((*c++) - '0');
+					if (*c == '.') {
+						c++;
+						while (isdigit(*c)) {
+							num = num * 10 + ((*c++) - '0');
+							denum = denum * 10;
+						}
+					}
+					if (isalpha(*c)) {
+						/* scale indicator */
+						switch (*c) {
+						case 'i':	/* inch -> 10pt */
+							value2 = value2 * 10 + (num * 10 + denum / 2) / denum;
+							num = 0;
+							break;
+						default:
+							break;
+						}
+						c++;
+					}
+					value2 = value2 + (num + denum / 2) / denum;
+					value2 = sign * value2;
+					opex = 1;
+					break;
+				}
+			case '\\':
+				c = scan_escape(c + 1);
+				value2 = intresult * sign;
+				if (isalpha(*c))
+					c++;	/* scale indicator */
+				opex = 1;
+				break;
+			case '-':
+				if (oper) {
+					sign = -1;
+					c++;
+					break;
+				}
+			case '>':
+			case '<':
+			case '+':
+			case '/':
+			case '*':
+			case '%':
+			case '&':
+			case '=':
+			case ':':
+				if (c[1] == '=')
+					oper = (*c++) + 16;
+				else
+					oper = *c;
+				c++;
+				break;
+			default:
+				c++;
+				break;
+			}
+			if (opex) {
+				sign = 1;
+				switch (oper) {
+				case 'c':
+					value = value2;
+					break;
+				case '-':
+					value = value - value2;
+					break;
+				case '+':
+					value = value + value2;
+					break;
+				case '*':
+					value = value * value2;
+					break;
+				case '/':
+					if (value2)
+						value = value / value2;
+					break;
+				case '%':
+					if (value2)
+						value = value % value2;
+					break;
+				case '<':
+					value = (value < value2);
+					break;
+				case '>':
+					value = (value > value2);
+					break;
+				case '>' + 16:
+					value = (value >= value2);
+					break;
+				case '<' + 16:
+					value = (value <= value2);
+					break;
+				case '=':
+				case '=' + 16:
+					value = (value == value2);
+					break;
+				case '&':
+					value = (value && value2);
+					break;
+				case ':':
+					value = (value || value2);
+					break;
+				default:
+					fprintf(stderr, "man2html: unknown operator %c.\n", oper);
+				}
+				oper = 0;
+			}
+		}
+		if (*c == ')')
+			c++;
+	}
+	*result = value;
+	return c;
+}
+
+static void
+trans_char(char *c, char s, char t)
+{
+	char   *sl = c;
+	int     slash = 0;
+
+	while (*sl != '\n' || slash) {
+		if (!slash) {
+			if (*sl == escapesym)
+				slash = 1;
+			else if (*sl == s)
+				*sl = t;
+		} else
+			slash = 0;
+		sl++;
+	}
+}
+
+/* Remove \a from C in place.  Return modified C. */
+static char *
+unescape (char *c)
+{
+	int	i, l;
+
+	l = strlen (c);
+	i = 0;
+	while (i < l && c[i]) {
+		if (c[i] == '\a') {
+			if (c[i+1])
+				memmove (c + i, c + i + 1, l - i);
+			else {
+				c[i] = '\0';
+				break;
+			}
+		}
+		i++;
+	}
+	return c;
+}
+	
+static char *
+fill_words(char *c, char *words[], int *n)
+{
+	char   *sl = c;
+	int     slash = 0;
+	int     skipspace = 0;
+
+	*n = 0;
+	words[*n] = sl;
+	while (*sl && (*sl != '\n' || slash)) {
+		if (!slash) {
+			if (*sl == '"') {
+				*sl = '\a';
+				skipspace = !skipspace;
+			} else if (*sl == '\a') {
+				/* handle already-translated " */
+				skipspace = !skipspace;
+			} else if (*sl == escapesym)
+				slash = 1;
+			else if ((*sl == ' ' || *sl == '\t') && !skipspace) {
+				*sl = '\n';
+				if (words[*n] != sl)
+					(*n)++;
+				words[*n] = sl + 1;
+			}
+		} else {
+			if (*sl == '"') {
+				sl--;
+				*sl = '\n';
+				if (words[*n] != sl)
+					(*n)++;
+				sl++;
+				while (*sl && *sl != '\n')
+					sl++;
+				words[*n] = sl;
+				sl--;
+			}
+			slash = 0;
+		}
+		sl++;
+	}
+	if (sl != words[*n])
+		(*n)++;
+	return sl;
+}
+
+static char *abbrev_list[] = {
+	"GSBG", "Getting Started ",
+	"SUBG", "Customizing SunOS",
+	"SHBG", "Basic Troubleshooting",
+	"SVBG", "SunView User's Guide",
+	"MMBG", "Mail and Messages",
+	"DMBG", "Doing More with SunOS",
+	"UNBG", "Using the Network",
+	"GDBG", "Games, Demos &amp; Other Pursuits",
+	"CHANGE", "SunOS 4.1 Release Manual",
+	"INSTALL", "Installing SunOS 4.1",
+	"ADMIN", "System and Network Administration",
+	"SECUR", "Security Features Guide",
+	"PROM", "PROM User's Manual",
+	"DIAG", "Sun System Diagnostics",
+	"SUNDIAG", "Sundiag User's Guide",
+	"MANPAGES", "SunOS Reference Manual",
+	"REFMAN", "SunOS Reference Manual",
+	"SSI", "Sun System Introduction",
+	"SSO", "System Services Overview",
+	"TEXT", "Editing Text Files",
+	"DOCS", "Formatting Documents",
+	"TROFF", "Using <B>nroff</B> and <B>troff</B>",
+	"INDEX", "Global Index",
+	"CPG", "C Programmer's Guide",
+	"CREF", "C Reference Manual",
+	"ASSY", "Assembly Language Reference",
+	"PUL", "Programming Utilities and Libraries",
+	"DEBUG", "Debugging Tools",
+	"NETP", "Network Programming",
+	"DRIVER", "Writing Device Drivers",
+	"STREAMS", "STREAMS Programming",
+	"SBDK", "SBus Developer's Kit",
+	"WDDS", "Writing Device Drivers for the SBus",
+	"FPOINT", "Floating-Point Programmer's Guide",
+	"SVPG", "SunView 1 Programmer's Guide",
+	"SVSPG", "SunView 1 System Programmer's Guide",
+	"PIXRCT", "Pixrect Reference Manual",
+	"CGI", "SunCGI Reference Manual",
+	"CORE", "SunCore Reference Manual",
+	"4ASSY", "Sun-4 Assembly Language Reference",
+	"SARCH", "<FONT SIZE=-1>SPARC</FONT> Architecture Manual",
+	"KR", "The C Programming Language",
+NULL, NULL};
+
+static char *
+lookup_abbrev(char *c)
+{
+	int     i = 0;
+
+	if (!c)
+		return "";
+	while (abbrev_list[i] && strcmp(c, abbrev_list[i]))
+		i = i + 2;
+	if (abbrev_list[i])
+		return abbrev_list[i + 1];
+	else
+		return c;
+}
+
+static char manidx[NULL_TERMINATED(HUGE_STR_MAX)];
+static int subs = 0;
+static int mip = 0;
+static char label[5] = "lbAA";
+
+static void
+add_to_index(int level, char *item)
+{
+	char   *c = NULL;
+
+	label[3]++;
+	if (label[3] > 'Z') {
+		label[3] = 'A';
+		label[2]++;
+	}
+	if (level != subs) {
+		if (subs) {
+			strmaxcpy(manidx + mip, "</DL>\n", HUGE_STR_MAX - mip);
+			mip += 6;
+		} else {
+			strmaxcpy(manidx + mip, "<DL>\n", HUGE_STR_MAX - mip);
+			mip += 5;
+		}
+	}
+	subs = level;
+	scan_troff(item, 1, &c);
+	sprintf(manidx + mip, "<DT><A HREF=\"#%s\">%s</A><DD>\n", label, c);
+	if (c)
+		free(c);
+	while (manidx[mip])
+		mip++;
+}
+
+static char *
+skip_till_newline(char *c)
+{
+	int     lvl = 0;
+
+	while (*c && *c != '\n' || lvl > 0) {
+		if (*c == '\\') {
+			c++;
+			if (*c == '}')
+				lvl--;
+			else if (*c == '{')
+				lvl++;
+		}
+		c++;
+	}
+	c++;
+	if (lvl < 0 && newline_for_fun) {
+		newline_for_fun = newline_for_fun + lvl;
+		if (newline_for_fun < 0)
+			newline_for_fun = 0;
+	}
+	return c;
+}
+
+static void
+outputPageHeader(char *l, char *c, char *r)
+{
+	out_html("<TABLE WIDTH=100%>\n<TR>\n");
+	out_html("<TH ALIGN=LEFT width=33%>");
+	out_html(l);
+	out_html("<TH ALIGN=CENTER width=33%>");
+	out_html(c);
+	out_html("<TH ALIGN=RIGHT width=33%>");
+	out_html(r);
+	out_html("\n</TR>\n</TABLE>\n");
+}
+
+static void
+outputPageFooter(char *l, char *c, char *r)
+{
+	out_html("<HR>\n");
+	outputPageHeader(l, c, r);
+}
+
+static int ifelseval = 0;
+
+static char *
+scan_request(char *c)
+{
+	/* BSD Mandoc stuff */
+	static int mandoc_synopsis = 0;	/* True if we are in the synopsis
+					 * section */
+	static int mandoc_command = 0;	/* True if this is mandoc page */
+	static int mandoc_bd_options;	/* Only copes with non-nested Bd's */
+
+	int     i, j, mode = 0;
+	char   *h;
+	char   *wordlist[MAX_WORDLIST];
+	int     words;
+	char   *sl;
+	STRDEF *owndef;
+
+	while (*c == ' ' || *c == '\t')
+		c++;
+	if (c[0] == '\n')
+		return c + 1;
+	if (c[1] == '\n')
+		j = 1;
+	else
+		j = 2;
+	while (c[j] == ' ' || c[j] == '\t')
+		j++;
+	if (c[0] == escapesym) {
+		/* some pages use .\" .\$1 .\} */
+		/* .\$1 is too difficult/stupid */
+		if (c[1] == '$')
+			c = skip_till_newline(c);
+		else
+			c = scan_escape(c + 1);
+	} else {
+		i = V(c[0], c[1]);
+		switch (i) {
+		case V('a', 'b'):
+			h = c + j;
+			while (*h && *h != '\n')
+				h++;
+			*h = '\0';
+			if (scaninbuff && buffpos) {
+				buffer[buffpos] = '\0';
+				puts(buffer);
+			}
+			/* fprintf(stderr, "%s\n", c+2); */
+			exit(0);
+			break;
+		case V('d', 'i'):
+			{
+				STRDEF *de;
+				int     oldcurpos = curpos;
+
+				c = c + j;
+				i = V(c[0], c[1]);
+				if (*c == '\n') {
+					c++;
+					break;
+				}
+				while (*c && *c != '\n')
+					c++;
+				c++;
+				h = c;
+				while (*c && strncmp(c, ".di", 3))
+					while (*c && *c++ != '\n');
+				*c = '\0';
+				de = strdef;
+				while (de && de->nr != i)
+					de = de->next;
+				if (!de) {
+					de = (STRDEF *) xmalloc(sizeof(STRDEF));
+					de->nr = i;
+					de->slen = 0;
+					de->next = strdef;
+					de->st = NULL;
+					strdef = de;
+				} else {
+					if (de->st)
+						free(de->st);
+					de->slen = 0;
+					de->st = NULL;
+				}
+				scan_troff(h, 0, &de->st);
+				*c = '.';
+				while (*c && *c++ != '\n');
+				break;
+			}
+		case V('d', 's'):
+			mode = 1;
+		case V('a', 's'):
+			{
+				STRDEF *de;
+				int     oldcurpos = curpos;
+
+				c = c + j;
+				i = V(c[0], c[1]);
+				j = 0;
+				while (c[j] && c[j] != '\n')
+					j++;
+				if (j < 3) {
+					c = c + j;
+					break;
+				}
+				if (c[1] == ' ')
+					c = c + 1;
+				else
+					c = c + 2;
+				while (isspace(*c))
+					c++;
+				if (*c == '"')
+					c++;
+				de = strdef;
+				while (de && de->nr != i)
+					de = de->next;
+				single_escape = 1;
+				curpos = 0;
+				if (!de) {
+					char   *h;
+
+					de = (STRDEF *) xmalloc(sizeof(STRDEF));
+					de->nr = i;
+					de->slen = 0;
+					de->next = strdef;
+					de->st = NULL;
+					strdef = de;
+					h = NULL;
+					c = scan_troff(c, 1, &h);
+					de->st = h;
+					de->slen = curpos;
+				} else {
+					if (mode) {
+						char   *h = NULL;
+
+						c = scan_troff(c, 1, &h);
+						free(de->st);
+						de->slen = 0;
+						de->st = h;
+					} else
+						c = scan_troff(c, 1, &de->st);
+					de->slen += curpos;
+				}
+				single_escape = 0;
+				curpos = oldcurpos;
+			}
+			break;
+		case V('b', 'r'):
+			if (still_dd)
+				out_html("<DD>");
+			else
+				out_html("<BR>\n");
+			curpos = 0;
+			c = c + j;
+			if (c[0] == escapesym) {
+				c = scan_escape(c + 1);
+			}
+			c = skip_till_newline(c);
+			break;
+		case V('c', '2'):
+			c = c + j;
+			if (*c != '\n') {
+				nobreaksym = *c;
+			} else
+				nobreaksym = '\'';
+			c = skip_till_newline(c);
+			break;
+		case V('c', 'c'):
+			c = c + j;
+			if (*c != '\n') {
+				controlsym = *c;
+			} else
+				controlsym = '.';
+			c = skip_till_newline(c);
+			break;
+		case V('c', 'e'):
+			c = c + j;
+			if (*c == '\n') {
+				i = 1;
+			} else {
+				i = 0;
+				while ('0' <= *c && *c <= '9') {
+					i = i * 10 + *c - '0';
+					c++;
+				}
+			}
+			c = skip_till_newline(c);
+			/* center next i lines */
+			if (i > 0) {
+				out_html("<CENTER>\n");
+				while (i && *c) {
+					char   *line = NULL;
+
+					c = scan_troff(c, 1, &line);
+					if (line && strncmp(line, "<BR>", 4)) {
+						out_html(line);
+						out_html("<BR>\n");
+						i--;
+					}
+				}
+				out_html("</CENTER>\n");
+				curpos = 0;
+			}
+			break;
+		case V('e', 'c'):
+			c = c + j;
+			if (*c != '\n') {
+				escapesym = *c;
+			} else
+				escapesym = '\\';
+			break;
+			c = skip_till_newline(c);
+		case V('e', 'o'):
+			escapesym = '\0';
+			c = skip_till_newline(c);
+			break;
+		case V('e', 'x'):
+			exit(0);
+			break;
+		case V('f', 'c'):
+			c = c + j;
+			if (*c == '\n') {
+				fieldsym = padsym = '\0';
+			} else {
+				fieldsym = c[0];
+				padsym = c[1];
+			}
+			c = skip_till_newline(c);
+			break;
+		case V('f', 'i'):
+			if (!fillout) {
+				out_html(change_to_font(0));
+				out_html(change_to_size('0'));
+				out_html("</PRE>\n");
+			}
+			curpos = 0;
+			fillout = 1;
+			c = skip_till_newline(c);
+			break;
+		case V('f', 't'):
+			c = c + j;
+			if (*c == '\n') {
+				out_html(change_to_font(0));
+			} else {
+				if (*c == escapesym) {
+					int     fn;
+
+					c = scan_expression(c, &fn);
+					c--;
+					out_html(change_to_font(fn));
+				} else {
+					out_html(change_to_font(*c));
+					c++;
+				}
+			}
+			c = skip_till_newline(c);
+			break;
+		case V('e', 'l'):
+			/* .el anything : else part of if else */
+			if (ifelseval) {
+				c = c + j;
+				c[-1] = '\n';
+				c = scan_troff(c, 1, NULL);
+			} else
+				c = skip_till_newline(c + j);
+			break;
+		case V('i', 'e'):
+			/* .ie c anything : then part of if else */
+		case V('i', 'f'):
+			/*
+			 * .if c anything .if !c anything .if N anything .if
+			 * !N anything .if 'string1'string2' anything .if
+			 * !'string1'string2' anything
+			 */
+			c = c + j;
+			c = scan_expression(c, &i);
+			ifelseval = !i;
+			if (i) {
+				*c = '\n';
+				c++;
+				c = scan_troff(c, 1, NULL);
+			} else
+				c = skip_till_newline(c);
+			break;
+		case V('i', 'g'):
+			{
+				char   *endwith = "..\n";
+
+				i = 3;
+				c = c + j;
+				if (*c != '\n') {
+					endwith = c - 1;
+					i = 1;
+					c[-1] = '.';
+					while (*c && *c != '\n')
+						c++, i++;
+				}
+				c++;
+				while (*c && strncmp(c, endwith, i))
+					while (*c++ != '\n');
+				while (*c++ != '\n');
+				break;
+			}
+		case V('n', 'f'):
+			if (fillout) {
+				out_html(change_to_font(0));
+				out_html(change_to_size('0'));
+				out_html("<PRE>\n");
+			}
+			curpos = 0;
+			fillout = 0;
+			c = skip_till_newline(c);
+			break;
+		case V('p', 's'):
+			c = c + j;
+			if (*c == '\n') {
+				out_html(change_to_size('0'));
+			} else {
+				j = 0;
+				i = 0;
+				if (*c == '-') {
+					j = -1;
+					c++;
+				} else if (*c == '+') {
+					j = 1;
+					c++;
+				}
+				c = scan_expression(c, &i);
+				if (!j) {
+					j = 1;
+					if (i > 5)
+						i = i - 10;
+				}
+				out_html(change_to_size(i * j));
+			}
+			c = skip_till_newline(c);
+			break;
+		case V('s', 'p'):
+			c = c + j;
+			if (fillout)
+				out_html("<P>");
+			else {
+				out_html(NEWLINE);
+				NEWLINE[0] = '\n';
+			}
+			curpos = 0;
+			c = skip_till_newline(c);
+			break;
+		case V('s', 'o'):
+			{
+				FILE   *f;
+				struct stat stbuf;
+				int     l = 0;
+				char   *buf;
+				char   *name = NULL;
+
+				curpos = 0;
+				c = c + j;
+				if (*c == '/') {
+					h = c;
+				} else {
+					h = c - 3;
+					h[0] = '.';
+					h[1] = '.';
+					h[2] = '/';
+				}
+				while (*c != '\n')
+					c++;
+				*c = '\0';
+				scan_troff(h, 1, &name);
+				if (name[3] == '/')
+					h = name + 3;
+				else
+					h = name;
+				if (stat(h, &stbuf) != -1)
+					l = stbuf.st_size;
+#if NOCGI
+				if (!out_length) {
+					char   *t, *s;
+
+					t = strrchr(fname, '/');
+					if (!t)
+						t = fname;
+					fprintf(stderr, "ln -s %s.html %s.html\n", h, t);
+					s = strrchr(t, '.');
+					if (!s)
+						s = t;
+					printf("<HTML><HEAD><TITLE> Manpage of %s</TITLE>\n"
+					       "</HEAD><BODY>\n"
+					       "See the manpage for <A HREF=\"%s.html\">%s</A>.\n"
+					       "</BODY></HTML>\n",
+					       s, h, h);
+				} else
+#endif
+				{
+					/*
+					 * this works alright, except for
+					 * section 3
+					 */
+					buf = read_man_page(h);
+					if (!buf) {
+
+						fprintf(stderr, "man2html: unable to open or read file %s.\n",
+							h);
+						out_html("<BLOCKQUOTE>"
+							 "man2html: unable to open or read file.\n");
+						out_html(h);
+						out_html("</BLOCKQUOTE>\n");
+					} else {
+						buf[0] = buf[l] = '\n';
+						buf[l + 1] = buf[l + 2] = '\0';
+						scan_troff(buf + 1, 0, NULL);
+					}
+					if (buf)
+						free(buf);
+				}
+				*c++ = '\n';
+				break;
+			}
+		case V('t', 'a'):
+			c = c + j;
+			j = 0;
+			while (*c != '\n') {
+				sl = scan_expression(c, &tabstops[j]);
+				if (*c == '-' || *c == '+')
+					tabstops[j] += tabstops[j - 1];
+				c = sl;
+				while (*c == ' ' || *c == '\t')
+					c++;
+				j++;
+			}
+			maxtstop = j;
+			curpos = 0;
+			break;
+		case V('t', 'i'):
+			/*
+			 * while (itemdepth || dl_set[itemdepth]) {
+			 * out_html("</DL>\n"); if (dl_set[itemdepth])
+			 * dl_set[itemdepth]=0; else itemdepth--; }
+			 */
+			out_html("<BR>\n");
+			c = c + j;
+			c = scan_expression(c, &j);
+			for (i = 0; i < j; i++)
+				out_html("&nbsp;");
+			curpos = j;
+			c = skip_till_newline(c);
+			break;
+		case V('t', 'm'):
+			c = c + j;
+			h = c;
+			while (*c != '\n')
+				c++;
+			*c = '\0';
+			/* fprintf(stderr,"%s\n", h); */
+			*c = '\n';
+			break;
+		case V('B', ' '):
+		case V('B', '\n'):
+		case V('I', ' '):
+		case V('I', '\n'):
+			/* parse one line in a certain font */
+			out_html(change_to_font(*c));
+			trans_char(c, '"', '\a');
+			c = c + j;
+			if (*c == '\n')
+				c++;
+			c = scan_troff(c, 1, NULL);
+			out_html(change_to_font('R'));
+			out_html(NEWLINE);
+			if (fillout)
+				curpos++;
+			else
+				curpos = 0;
+			break;
+		case V('O', 'P'):	/* groff manpages use this
+					 * construction */
+			/* .OP a b : [ <B>a</B> <I>b</I> ] */
+			mode = 1;
+			c[0] = 'B';
+			c[1] = 'I';
+			out_html(change_to_font('R'));
+			out_html("[");
+			curpos++;
+		case V('B', 'R'):
+		case V('B', 'I'):
+		case V('I', 'B'):
+		case V('I', 'R'):
+		case V('R', 'B'):
+		case V('R', 'I'):
+			{
+				char    font[2];
+
+				font[0] = c[0];
+				font[1] = c[1];
+				c = c + j;
+				if (*c == '\n')
+					c++;
+				sl = fill_words(c, wordlist, &words);
+				c = sl + 1;
+				/*
+				 * .BR name (section) indicates a link. It
+				 * will be added in the output routine.
+				 */
+				for (i = 0; i < words; i++) {
+					if (mode) {
+						out_html(" ");
+						curpos++;
+					}
+					wordlist[i][-1] = ' ';
+					out_html(change_to_font(font[i & 1]));
+					scan_troff(wordlist[i], 1, NULL);
+				}
+				out_html(change_to_font('R'));
+				if (mode) {
+					out_html(" ]");
+					curpos++;
+				}
+				out_html(NEWLINE);
+				if (!fillout)
+					curpos = 0;
+				else
+					curpos++;
+			}
+			break;
+		case V('D', 'T'):
+			for (j = 0; j < 20; j++)
+				tabstops[j] = (j + 1) * 8;
+			maxtstop = 20;
+			c = skip_till_newline(c);
+			break;
+		case V('I', 'P'):
+			sl = fill_words(c + j, wordlist, &words);
+			c = sl + 1;
+			if (!dl_set[itemdepth]) {
+				out_html("<DL COMPACT>\n");
+				dl_set[itemdepth] = 1;
+			}
+			out_html("<DT>");
+			if (words) {
+				scan_troff(wordlist[0], 1, NULL);
+			}
+			out_html("<DD>");
+			curpos = 0;
+			break;
+		case V('T', 'P'):
+			if (!dl_set[itemdepth]) {
+				out_html("<DL COMPACT>\n");
+				dl_set[itemdepth] = 1;
+			}
+			out_html("<DT>");
+			c = skip_till_newline(c);
+			/* somewhere a definition ends with '.TP' */
+			if (!*c)
+				still_dd = 1;
+			else {
+				c = scan_troff(c, 1, NULL);
+				out_html("<DD>");
+			}
+			curpos = 0;
+			break;
+		case V('I', 'X'):
+			/* general index */
+			sl = fill_words(c + j, wordlist, &words);
+			c = sl + 1;
+			j = 4;
+			while (idxlabel[j] == 'Z')
+				idxlabel[j--] = 'A';
+			idxlabel[j]++;
+#ifdef MAKEINDEX
+			fprintf(idxfile, "%s@%s@", fname, idxlabel);
+			for (j = 0; j < words; j++) {
+				h = NULL;
+				scan_troff(wordlist[j], 1, &h);
+				fprintf(idxfile, "_\b@%s", h);
+				free(h);
+			}
+			fprintf(idxfile, "\n");
+#endif
+			out_html("<A NAME=\"");
+			out_html(idxlabel);
+			/*
+			 * this will not work in mosaic (due to a bug).
+			 * Adding '&nbsp;' between '>' and '<' solves it, but
+			 * creates some space. A normal space does not work.
+			 */
+			out_html("\"></A>");
+			break;
+		case V('L', 'P'):
+		case V('P', 'P'):
+			if (dl_set[itemdepth]) {
+				out_html("</DL>\n");
+				dl_set[itemdepth] = 0;
+			}
+			if (fillout)
+				out_html("<P>\n");
+			else {
+				out_html(NEWLINE);
+				NEWLINE[0] = '\n';
+			}
+			curpos = 0;
+			c = skip_till_newline(c);
+			break;
+		case V('H', 'P'):
+			if (!dl_set[itemdepth]) {
+				out_html("<DL COMPACT>");
+				dl_set[itemdepth] = 1;
+			}
+			out_html("<DT>\n");
+			still_dd = 1;
+			c = skip_till_newline(c);
+			curpos = 0;
+			break;
+		case V('P', 'D'):
+			c = skip_till_newline(c);
+			break;
+		case V('R', 's'):	/* BSD mandoc */
+		case V('R', 'S'):
+			sl = fill_words(c + j, wordlist, &words);
+			j = 1;
+			if (words > 0)
+				scan_expression(wordlist[0], &j);
+			if (j >= 0) {
+				itemdepth++;
+				dl_set[itemdepth] = 0;
+				out_html("<DL COMPACT><DT><DD>");
+				c = skip_till_newline(c);
+				curpos = 0;
+				break;
+			}
+		case V('R', 'e'):	/* BSD mandoc */
+		case V('R', 'E'):
+			if (itemdepth > 0) {
+				if (dl_set[itemdepth])
+					out_html("</DL>");
+				out_html("</DL>\n");
+				itemdepth--;
+			}
+			c = skip_till_newline(c);
+			curpos = 0;
+			break;
+		case V('S', 'B'):
+			out_html(change_to_size(-1));
+			out_html(change_to_font('B'));
+			c = scan_troff(c + j, 1, NULL);
+			out_html(change_to_font('R'));
+			out_html(change_to_size('0'));
+			break;
+		case V('S', 'M'):
+			c = c + j;
+			if (*c == '\n')
+				c++;
+			out_html(change_to_size(-1));
+			trans_char(c, '"', '\a');
+			c = scan_troff(c, 1, NULL);
+			out_html(change_to_size('0'));
+			break;
+		case V('S', 's'):	/* BSD mandoc */
+			mandoc_command = 1;
+		case V('S', 'S'):
+			mode = 1;
+		case V('S', 'h'):	/* BSD mandoc */
+			/* hack for fallthru from above */
+			mandoc_command = !mode || mandoc_command;
+		case V('S', 'H'):
+			c = c + j;
+			if (*c == '\n')
+				c++;
+			while (itemdepth || dl_set[itemdepth]) {
+				out_html("</DL>\n");
+				if (dl_set[itemdepth])
+					dl_set[itemdepth] = 0;
+				else if (itemdepth > 0)
+					itemdepth--;
+			}
+			out_html(change_to_font(0));
+			out_html(change_to_size(0));
+			if (!fillout) {
+				fillout = 1;
+				out_html("</PRE>");
+			}
+			trans_char(c, '"', '\a');
+			add_to_index(mode, c);
+			out_html("<A NAME=\"");
+			out_html(label);
+			/* &nbsp; for mosaic users */
+			if (mode)
+				out_html("\">&nbsp;</A>\n<H4>");
+			else
+				out_html("\">&nbsp;</A>\n<H3>");
+			mandoc_synopsis = strncmp(c, "SYNOPSIS", 8) == 0;
+			c = mandoc_command ? scan_troff_mandoc(c, 1, NULL) : scan_troff(c, 1, NULL);
+			if (mode)
+				out_html("</H4>\n");
+			else
+				out_html("</H3>\n");
+			curpos = 0;
+			break;
+		case V('T', 'S'):
+			c = scan_table(c);
+			break;
+		case V('D', 't'):	/* BSD mandoc */
+			mandoc_command = 1;
+		case V('T', 'H'):
+			if (!output_possible) {
+				sl = fill_words(c + j, wordlist, &words);
+				if (words > 1) {
+					char	*t;
+					for (i = 1; i < words; i++)
+						wordlist[i][-1] = '\0';
+					*sl = '\0';
+					output_possible = 1;
+					sprintf(th_page_and_sec, "%s(%s)", wordlist[0], wordlist[1]);
+					if (words > 2) {
+						t = unescape(wordlist[2]);
+						strncpy(th_datestr, t, sizeof(th_datestr));
+						th_datestr[sizeof(th_datestr) - 1] = '\0';
+					} else
+						th_datestr[0] = '\0';
+					if (words > 3) {
+						t = unescape(wordlist[3]);
+						strncpy(th_version, t, sizeof(th_version));
+						th_version[sizeof(th_version) - 1] = '\0';
+					} else
+						th_version[0] = '\0';
+					out_html("<HTML><HEAD>\n<TITLE>");
+					out_html(th_page_and_sec);
+					out_html(" Manual Page");
+					out_html("</TITLE>\n</HEAD>\n<BODY>");
+
+					outputPageHeader(th_page_and_sec, th_datestr, th_page_and_sec);
+					
+					out_html("<BR><A HREF=\"#index\">Index</A>\n");
+					*sl = '\n';
+					out_html("<HR>\n");
+					if (mandoc_command)
+						out_html("<BR>BSD mandoc<BR>");
+				}
+				c = sl + 1;
+			} else
+				c = skip_till_newline(c);
+			curpos = 0;
+			break;
+		case V('T', 'X'):
+			sl = fill_words(c + j, wordlist, &words);
+			*sl = '\0';
+			out_html(change_to_font('I'));
+			if (words > 1)
+				wordlist[1][-1] = '\0';
+			c = lookup_abbrev(wordlist[0]);
+			curpos += strlen(c);
+			out_html(c);
+			out_html(change_to_font('R'));
+			if (words > 1)
+				out_html(wordlist[1]);
+			*sl = '\n';
+			c = sl + 1;
+			break;
+		case V('r', 'm'):
+			/* .rm xx : Remove request, macro or string */
+		case V('r', 'n'):
+			/*
+			 * .rn xx yy : Rename request, macro or string xx to
+			 * yy
+			 */
+			{
+				STRDEF *de;
+
+				c = c + j;
+				i = V(c[0], c[1]);
+				c = c + 2;
+				while (isspace(*c) && *c != '\n')
+					c++;
+				j = V(c[0], c[1]);
+				while (*c && *c != '\n')
+					c++;
+				c++;
+				de = strdef;
+				while (de && de->nr != j)
+					de = de->next;
+				if (de) {
+					if (de->st)
+						free(de->st);
+					de->nr = 0;
+				}
+				de = strdef;
+				while (de && de->nr != i)
+					de = de->next;
+				if (de)
+					de->nr = j;
+				break;
+			}
+		case V('n', 'x'):
+			/* .nx filename : next file. */
+		case V('i', 'n'):
+			/* .in +-N : Indent */
+			c = skip_till_newline(c);
+			break;
+		case V('n', 'r'):
+			/*
+			 * .nr R +-N M: define and set number register R by
+			 * +-N; auto-increment by M
+			 */
+			{
+				INTDEF *intd;
+
+				c = c + j;
+				i = V(c[0], c[1]);
+				c = c + 2;
+				intd = intdef;
+				while (intd && intd->nr != i)
+					intd = intd->next;
+				if (!intd) {
+					intd = (INTDEF *) xmalloc(sizeof(INTDEF));
+					intd->nr = i;
+					intd->val = 0;
+					intd->incr = 0;
+					intd->next = intdef;
+					intdef = intd;
+				}
+				while (*c == ' ' || *c == '\t')
+					c++;
+				c = scan_expression(c, &intd->val);
+				if (*c != '\n') {
+					while (*c == ' ' || *c == '\t')
+						c++;
+					c = scan_expression(c, &intd->incr);
+				}
+				c = skip_till_newline(c);
+				break;
+			}
+		case V('a', 'm'):
+			/* .am xx yy : append to a macro. */
+			/* define or handle as .ig yy */
+			mode = 1;
+		case V('d', 'e'):
+			/*
+			 * .de xx yy : define or redefine macro xx; end at
+			 * .yy (..)
+			 */
+			/* define or handle as .ig yy */
+			{
+				STRDEF *de;
+				int     olen = 0;
+
+				c = c + j;
+				sl = fill_words(c, wordlist, &words);
+				i = V(c[0], c[1]);
+				j = 2;
+				if (words == 1)
+					wordlist[1] = "..";
+				else {
+					wordlist[1]--;
+					wordlist[1][0] = '.';
+					j = 3;
+				}
+				c = sl + 1;
+				sl = c;
+				while (*c && strncmp(c, wordlist[1], j))
+					c = skip_till_newline(c);
+				de = defdef;
+				while (de && de->nr != i)
+					de = de->next;
+				if (mode && de)
+					olen = strlen(de->st);
+				j = olen + c - sl;
+				h = stralloc(j * 2 + 4);
+				if (h) {
+					for (j = 0; j < olen; j++)
+						h[j] = de->st[j];
+					if (!j || h[j - 1] != '\n')
+						h[j++] = '\n';
+					while (sl != c) {
+						if (sl[0] == '\\' && sl[1] == '\\') {
+							h[j++] = '\\';
+							sl++;
+						} else
+							h[j++] = *sl;
+						sl++;
+					}
+					h[j] = '\0';
+					if (de) {
+						if (de->st)
+							free(de->st);
+						de->st = h;
+					} else {
+						de = (STRDEF *) xmalloc(sizeof(STRDEF));
+						de->nr = i;
+						de->next = defdef;
+						de->st = h;
+						defdef = de;
+					}
+				}
+			}
+			c = skip_till_newline(c);
+			break;
+		case V('B', 'l'):	/* BSD mandoc */
+			{
+				char    list_options[NULL_TERMINATED(MED_STR_MAX)];
+				char   *nl = strchr(c, '\n');
+
+				c = c + j;
+				if (dl_set[itemdepth]) {	/* These things can
+								 * nest. */
+					itemdepth++;
+				}
+				if (nl) {	/* Parse list options */
+					strlimitcpy(list_options, c, nl - c, MED_STR_MAX);
+				}
+				if (strstr(list_options, "-bullet")) {	/* HTML Unnumbered List */
+					dl_set[itemdepth] = BL_BULLET_LIST;
+					out_html("<UL>\n");
+				} else if (strstr(list_options, "-enum")) {	/* HTML Ordered List */
+					dl_set[itemdepth] = BL_ENUM_LIST;
+					out_html("<OL>\n");
+				} else {	/* HTML Descriptive List */
+					dl_set[itemdepth] = BL_DESC_LIST;
+					out_html("<DL COMPACT>\n");
+				}
+				if (fillout)
+					out_html("<P>\n");
+				else {
+					out_html(NEWLINE);
+					NEWLINE[0] = '\n';
+				}
+				curpos = 0;
+				c = skip_till_newline(c);
+				break;
+			}
+		case V('E', 'l'):	/* BSD mandoc */
+			c = c + j;
+			if (dl_set[itemdepth] & BL_DESC_LIST) {
+				out_html("</DL>\n");
+			} else if (dl_set[itemdepth] & BL_BULLET_LIST) {
+				out_html("</UL>\n");
+			} else if (dl_set[itemdepth] & BL_ENUM_LIST) {
+				out_html("</OL>\n");
+			}
+			dl_set[itemdepth] = 0;
+			if (itemdepth > 0)
+				itemdepth--;
+			if (fillout)
+				out_html("<P>\n");
+			else {
+				out_html(NEWLINE);
+				NEWLINE[0] = '\n';
+			}
+			curpos = 0;
+			c = skip_till_newline(c);
+			break;
+		case V('I', 't'):	/* BSD mandoc */
+			c = c + j;
+			if (strncmp(c, "Xo", 2) == 0 && isspace(*(c + 2))) {
+				c = skip_till_newline(c);
+			}
+			if (dl_set[itemdepth] & BL_DESC_LIST) {
+				out_html("<DT>");
+				out_html(change_to_font('B'));
+				if (*c == '\n') {	/* Don't allow embedded
+							 * comms after a newline */
+					c++;
+					c = scan_troff(c, 1, NULL);
+				} else {	/* Do allow embedded comms on
+						 * the same line. */
+					c = scan_troff_mandoc(c, 1, NULL);
+				}
+				out_html(change_to_font('R'));
+				out_html(NEWLINE);
+				out_html("<DD>");
+			} else if (dl_set[itemdepth] & (BL_BULLET_LIST | BL_ENUM_LIST)) {
+				out_html("<LI>");
+				c = scan_troff_mandoc(c, 1, NULL);
+				out_html(NEWLINE);
+			}
+			if (fillout)
+				curpos++;
+			else
+				curpos = 0;
+			break;
+		case V('B', 'k'):	/* BSD mandoc */
+		case V('E', 'k'):	/* BSD mandoc */
+		case V('D', 'd'):	/* BSD mandoc */
+		case V('O', 's'):	/* BSD mandoc */
+			trans_char(c, '"', '\a');
+			c = c + j;
+			if (*c == '\n')
+				c++;
+			c = scan_troff_mandoc(c, 1, NULL);
+			out_html(NEWLINE);
+			if (fillout)
+				curpos++;
+			else
+				curpos = 0;
+			break;
+		case V('B', 't'):	/* BSD mandoc */
+			trans_char(c, '"', '\a');
+			c = c + j;
+			out_html(" is currently in beta test.");
+			if (fillout)
+				curpos++;
+			else
+				curpos = 0;
+			break;
+		case V('B', 'x'):	/* BSD mandoc */
+			trans_char(c, '"', '\a');
+			c = c + j;
+			if (*c == '\n')
+				c++;
+			out_html("BSD ");
+			c = scan_troff_mandoc(c, 1, NULL);
+			if (fillout)
+				curpos++;
+			else
+				curpos = 0;
+			break;
+		case V('D', 'l'):	/* BSD mandoc */
+			c = c + j;
+			out_html(NEWLINE);
+			out_html("<BLOCKQUOTE>");
+			out_html(change_to_font('L'));
+			if (*c == '\n')
+				c++;
+			c = scan_troff_mandoc(c, 1, NULL);
+			out_html(change_to_font('R'));
+			out_html("</BLOCKQUOTE>");
+			if (fillout)
+				curpos++;
+			else
+				curpos = 0;
+			break;
+		case V('B', 'd'):	/* BSD mandoc */
+			{	/* Seems like a kind of example/literal mode */
+				char    bd_options[NULL_TERMINATED(MED_STR_MAX)];
+				char   *nl = strchr(c, '\n');
+
+				c = c + j;
+				if (nl) {
+					strlimitcpy(bd_options, c, nl - c, MED_STR_MAX);
+				}
+				out_html(NEWLINE);
+				mandoc_bd_options = 0;	/* Remember options for
+							 * terminating Bl */
+				if (strstr(bd_options, "-offset indent")) {
+					mandoc_bd_options |= BD_INDENT;
+					out_html("<BLOCKQUOTE>\n");
+				}
+				if (strstr(bd_options, "-literal")
+				    || strstr(bd_options, "-unfilled")) {
+					if (fillout) {
+						mandoc_bd_options |= BD_LITERAL;
+						out_html(change_to_font(0));
+						out_html(change_to_size('0'));
+						out_html("<PRE>\n");
+					}
+					curpos = 0;
+					fillout = 0;
+				}
+				c = skip_till_newline(c);
+				break;
+			}
+		case V('E', 'd'):	/* BSD mandoc */
+			if (mandoc_bd_options & BD_LITERAL) {
+				if (!fillout) {
+					out_html(change_to_font(0));
+					out_html(change_to_size('0'));
+					out_html("</PRE>\n");
+				}
+			}
+			if (mandoc_bd_options & BD_INDENT)
+				out_html("</BLOCKQUOTE>\n");
+			curpos = 0;
+			fillout = 1;
+			c = skip_till_newline(c);
+			break;
+		case V('B', 'e'):	/* BSD mandoc */
+			c = c + j;
+			if (fillout)
+				out_html("<P>");
+			else {
+				out_html(NEWLINE);
+				NEWLINE[0] = '\n';
+			}
+			curpos = 0;
+			c = skip_till_newline(c);
+			break;
+		case V('X', 'r'):	/* BSD mandoc */
+			{
+				/*
+				 * Translate xyz 1 to xyz(1) Allow for
+				 * multiple spaces.  Allow the section to be
+				 * missing.
+				 */
+				char    buff[NULL_TERMINATED(MED_STR_MAX)];
+				char   *bufptr;
+
+				trans_char(c, '"', '\a');
+				bufptr = buff;
+				c = c + j;
+				if (*c == '\n')
+					c++;	/* Skip spaces */
+				while (isspace(*c) && *c != '\n')
+					c++;
+				while (isalnum(*c)) {	/* Copy the xyz part */
+					*bufptr = *c;
+					bufptr++;
+					if (bufptr >= buff + MED_STR_MAX)
+						break;
+					c++;
+				}
+				while (isspace(*c) && *c != '\n')
+					c++;	/* Skip spaces */
+				if (isdigit(*c)) {	/* Convert the number if
+							 * there is one */
+					*bufptr = '(';
+					bufptr++;
+					if (bufptr < buff + MED_STR_MAX) {
+						while (isalnum(*c)) {
+							*bufptr = *c;
+							bufptr++;
+							if (bufptr >= buff + MED_STR_MAX)
+								break;
+							c++;
+						}
+						if (bufptr < buff + MED_STR_MAX) {
+							*bufptr = ')';
+							bufptr++;
+						}
+					}
+				}
+				while (*c != '\n') {	/* Copy the remainder */
+					if (!isspace(*c)) {
+						*bufptr = *c;
+						bufptr++;
+						if (bufptr >= buff + MED_STR_MAX)
+							break;
+					}
+					c++;
+				}
+				*bufptr = '\n';
+				scan_troff_mandoc(buff, 1, NULL);
+
+				out_html(NEWLINE);
+				if (fillout)
+					curpos++;
+				else
+					curpos = 0;
+			}
+			break;
+		case V('F', 'l'):	/* BSD mandoc */
+			trans_char(c, '"', '\a');
+			c = c + j;
+			out_html("-");
+			if (*c != '\n') {
+				out_html(change_to_font('B'));
+				c = scan_troff_mandoc(c, 1, NULL);
+				out_html(change_to_font('R'));
+			}
+			out_html(NEWLINE);
+			if (fillout)
+				curpos++;
+			else
+				curpos = 0;
+			break;
+		case V('P', 'a'):	/* BSD mandoc */
+		case V('P', 'f'):	/* BSD mandoc */
+			trans_char(c, '"', '\a');
+			c = c + j;
+			if (*c == '\n')
+				c++;
+			c = scan_troff_mandoc(c, 1, NULL);
+			out_html(NEWLINE);
+			if (fillout)
+				curpos++;
+			else
+				curpos = 0;
+			break;
+		case V('P', 'p'):	/* BSD mandoc */
+			if (fillout)
+				out_html("<P>\n");
+			else {
+				out_html(NEWLINE);
+				NEWLINE[0] = '\n';
+			}
+			curpos = 0;
+			c = skip_till_newline(c);
+			break;
+		case V('D', 'q'):	/* BSD mandoc */
+			trans_char(c, '"', '\a');
+			c = c + j;
+			if (*c == '\n')
+				c++;
+			out_html("``");
+			c = scan_troff_mandoc(c, 1, NULL);
+			out_html("''");
+			out_html(NEWLINE);
+			if (fillout)
+				curpos++;
+			else
+				curpos = 0;
+			break;
+		case V('O', 'p'):	/* BSD mandoc */
+			trans_char(c, '"', '\a');
+			c = c + j;
+			if (*c == '\n')
+				c++;
+			out_html(change_to_font('R'));
+			out_html("[");
+			c = scan_troff_mandoc(c, 1, NULL);
+			out_html(change_to_font('R'));
+			out_html("]");
+			out_html(NEWLINE);
+			if (fillout)
+				curpos++;
+			else
+				curpos = 0;
+			break;
+		case V('O', 'o'):	/* BSD mandoc */
+			trans_char(c, '"', '\a');
+			c = c + j;
+			if (*c == '\n')
+				c++;
+			out_html(change_to_font('R'));
+			out_html("[");
+			c = scan_troff_mandoc(c, 1, NULL);
+			if (fillout)
+				curpos++;
+			else
+				curpos = 0;
+			break;
+		case V('O', 'c'):	/* BSD mandoc */
+			trans_char(c, '"', '\a');
+			c = c + j;
+			c = scan_troff_mandoc(c, 1, NULL);
+			out_html(change_to_font('R'));
+			out_html("]");
+			if (fillout)
+				curpos++;
+			else
+				curpos = 0;
+			break;
+		case V('P', 'q'):	/* BSD mandoc */
+			trans_char(c, '"', '\a');
+			c = c + j;
+			if (*c == '\n')
+				c++;
+			out_html("(");
+			c = scan_troff_mandoc(c, 1, NULL);
+			out_html(")");
+			out_html(NEWLINE);
+			if (fillout)
+				curpos++;
+			else
+				curpos = 0;
+			break;
+		case V('Q', 'l'):	/* BSD mandoc */
+			{	/* Single quote first word in the line */
+				char   *sp;
+
+				trans_char(c, '"', '\a');
+				c = c + j;
+				if (*c == '\n')
+					c++;
+				sp = c;
+				do {	/* Find first whitespace after the
+					 * first word that isn't a mandoc
+					 * macro */
+					while (*sp && isspace(*sp))
+						sp++;
+					while (*sp && !isspace(*sp))
+						sp++;
+				} while (*sp && isupper(*(sp - 2)) && islower(*(sp - 1)));
+
+				/*
+				 * Use a newline to mark the end of text to
+				 * be quoted
+				 */
+				if (*sp)
+					*sp = '\n';
+				out_html("`");	/* Quote the text */
+				c = scan_troff_mandoc(c, 1, NULL);
+				out_html("'");
+				out_html(NEWLINE);
+				if (fillout)
+					curpos++;
+				else
+					curpos = 0;
+				break;
+			}
+		case V('S', 'q'):	/* BSD mandoc */
+			trans_char(c, '"', '\a');
+			c = c + j;
+			if (*c == '\n')
+				c++;
+			out_html("`");
+			c = scan_troff_mandoc(c, 1, NULL);
+			out_html("'");
+			out_html(NEWLINE);
+			if (fillout)
+				curpos++;
+			else
+				curpos = 0;
+			break;
+		case V('A', 'r'):	/* BSD mandoc */
+			/* parse one line in italics */
+			out_html(change_to_font('I'));
+			trans_char(c, '"', '\a');
+			c = c + j;
+			if (*c == '\n') {	/* An empty Ar means "file
+						 * ..." */
+				out_html("file ...");
+			} else {
+				c = scan_troff_mandoc(c, 1, NULL);
+			}
+			out_html(change_to_font('R'));
+			out_html(NEWLINE);
+			if (fillout)
+				curpos++;
+			else
+				curpos = 0;
+			break;
+		case V('A', 'd'):	/* BSD mandoc */
+		case V('E', 'm'):	/* BSD mandoc */
+		case V('V', 'a'):	/* BSD mandoc */
+		case V('X', 'c'):	/* BSD mandoc */
+			/* parse one line in italics */
+			out_html(change_to_font('I'));
+			trans_char(c, '"', '\a');
+			c = c + j;
+			if (*c == '\n')
+				c++;
+			c = scan_troff_mandoc(c, 1, NULL);
+			out_html(change_to_font('R'));
+			out_html(NEWLINE);
+			if (fillout)
+				curpos++;
+			else
+				curpos = 0;
+			break;
+		case V('N', 'd'):	/* BSD mandoc */
+			trans_char(c, '"', '\a');
+			c = c + j;
+			if (*c == '\n')
+				c++;
+			out_html(" - ");
+			c = scan_troff_mandoc(c, 1, NULL);
+			out_html(NEWLINE);
+			if (fillout)
+				curpos++;
+			else
+				curpos = 0;
+			break;
+		case V('N', 'm'):	/* BSD mandoc */
+			{
+				static char mandoc_name[NULL_TERMINATED(SMALL_STR_MAX)] = "";
+
+				trans_char(c, '"', '\a');
+				c = c + j;
+				if (mandoc_synopsis) {	/* Break lines only in
+							 * the Synopsis. The
+							 * Synopsis section
+							 * seems to be treated
+							 * as a special case -
+							 * Bummer! */
+					static int count = 0;	/* Don't break on the
+								 * first Nm */
+
+					if (count) {
+						out_html("<BR>");
+					} else {
+						char   *end = strchr(c, '\n');
+
+						if (end) {	/* Remember the name for
+								 * later. */
+							strlimitcpy(mandoc_name, c, end - c, SMALL_STR_MAX);
+						}
+					}
+					count++;
+				}
+				out_html(change_to_font('B'));
+				while (*c == ' ' || *c == '\t')
+					c++;
+				if (*c == '\n') {	/* If Nm has no
+							 * argument, use one
+							 * from an earlier Nm
+							 * command that did have
+							 * one.  Hope there
+							 * aren't too many
+							 * commands that do
+							 * this. */
+					out_html(mandoc_name);
+				} else {
+					c = scan_troff_mandoc(c, 1, NULL);
+				}
+				out_html(change_to_font('R'));
+				out_html(NEWLINE);
+				if (fillout)
+					curpos++;
+				else
+					curpos = 0;
+				break;
+			}
+		case V('C', 'd'):	/* BSD mandoc */
+		case V('C', 'm'):	/* BSD mandoc */
+		case V('I', 'c'):	/* BSD mandoc */
+		case V('M', 's'):	/* BSD mandoc */
+		case V('O', 'r'):	/* BSD mandoc */
+		case V('S', 'y'):	/* BSD mandoc */
+			/* parse one line in bold */
+			out_html(change_to_font('B'));
+			trans_char(c, '"', '\a');
+			c = c + j;
+			if (*c == '\n')
+				c++;
+			c = scan_troff_mandoc(c, 1, NULL);
+			out_html(change_to_font('R'));
+			out_html(NEWLINE);
+			if (fillout)
+				curpos++;
+			else
+				curpos = 0;
+			break;
+		case V('D', 'v'):	/* BSD mandoc */
+		case V('E', 'v'):	/* BSD mandoc */
+		case V('F', 'r'):	/* BSD mandoc */
+		case V('L', 'i'):	/* BSD mandoc */
+		case V('N', 'o'):	/* BSD mandoc */
+		case V('N', 's'):	/* BSD mandoc */
+		case V('T', 'n'):	/* BSD mandoc */
+		case V('n', 'N'):	/* BSD mandoc */
+			trans_char(c, '"', '\a');
+			c = c + j;
+			if (*c == '\n')
+				c++;
+			out_html(change_to_font('B'));
+			c = scan_troff_mandoc(c, 1, NULL);
+			out_html(change_to_font('R'));
+			out_html(NEWLINE);
+			if (fillout)
+				curpos++;
+			else
+				curpos = 0;
+			break;
+		case V('%', 'A'):	/* BSD mandoc biblio stuff */
+		case V('%', 'D'):
+		case V('%', 'N'):
+		case V('%', 'O'):
+		case V('%', 'P'):
+		case V('%', 'Q'):
+		case V('%', 'V'):
+			c = c + j;
+			if (*c == '\n')
+				c++;
+			c = scan_troff(c, 1, NULL);	/* Don't allow embedded
+							 * mandoc coms */
+			if (fillout)
+				curpos++;
+			else
+				curpos = 0;
+			break;
+		case V('%', 'B'):
+		case V('%', 'J'):
+		case V('%', 'R'):
+		case V('%', 'T'):
+			c = c + j;
+			out_html(change_to_font('I'));
+			if (*c == '\n')
+				c++;
+			c = scan_troff(c, 1, NULL);	/* Don't allow embedded
+							 * mandoc coms */
+			out_html(change_to_font('R'));
+			if (fillout)
+				curpos++;
+			else
+				curpos = 0;
+			break;
+		default:
+			/* search macro database of self-defined macros */
+			owndef = defdef;
+			while (owndef && owndef->nr != i)
+				owndef = owndef->next;
+			if (owndef) {
+				char  **oldargument;
+				int     deflen;
+				int     onff;
+
+				sl = fill_words(c + j, wordlist, &words);
+				c = sl + 1;
+				*sl = '\0';
+				for (i = 1; i < words; i++)
+					wordlist[i][-1] = '\0';
+				for (i = 0; i < words; i++) {
+					char   *h = NULL;
+
+					if (mandoc_command) {
+						scan_troff_mandoc(wordlist[i], 1, &h);
+					} else {
+						scan_troff(wordlist[i], 1, &h);
+					}
+					wordlist[i] = h;
+				}
+				for (i = words; i < 20; i++)
+					wordlist[i] = NULL;
+				deflen = strlen(owndef->st);
+				for (i = 0; owndef->st[deflen + 2 + i] = owndef->st[i]; i++);
+				oldargument = argument;
+				argument = wordlist;
+				onff = newline_for_fun;
+				if (mandoc_command) {
+					scan_troff_mandoc(owndef->st + deflen + 2, 0, NULL);
+				} else {
+					scan_troff(owndef->st + deflen + 2, 0, NULL);
+				}
+				newline_for_fun = onff;
+				argument = oldargument;
+				for (i = 0; i < words; i++)
+					if (wordlist[i])
+						free(wordlist[i]);
+				*sl = '\n';
+			} else if (mandoc_command &&
+				   ((isupper(*c) && islower(*(c + 1)))
+				    || (islower(*c) && isupper(*(c + 1))))
+				) {	/* Let through any BSD mandoc
+					 * commands that haven't been delt
+					 * with. I don't want to miss
+					 * anything out of the text. */
+				char    buf[4];
+
+				strncpy(buf, c, 2);
+				buf[2] = ' ';
+				buf[3] = '\0';
+				out_html(buf);	/* Print the command (it
+						 * might just be text). */
+				c = c + j;
+				trans_char(c, '"', '\a');
+				if (*c == '\n')
+					c++;
+				out_html(change_to_font('R'));
+				c = scan_troff(c, 1, NULL);
+				out_html(NEWLINE);
+				if (fillout)
+					curpos++;
+				else
+					curpos = 0;
+			} else {
+				c = skip_till_newline(c);
+			}
+			break;
+		}
+	}
+	if (fillout) {
+		out_html(NEWLINE);
+		curpos++;
+	}
+	NEWLINE[0] = '\n';
+	return c;
+}
+
+static void
+flush(void)
+{
+}
+
+static int contained_tab = 0;
+static int mandoc_line = 0;	/* Signals whether to look for embedded
+				 * mandoc commands. */
+
+/* san : stop at newline */
+static char *
+scan_troff(char *c, int san, char **result)
+{
+	char   *h;
+	char    intbuff[NULL_TERMINATED(MED_STR_MAX)];
+	int     ibp = 0;
+	int     i;
+	char   *exbuffer;
+	int     exbuffpos, exbuffmax, exscaninbuff, exnewline_for_fun;
+	int     usenbsp = 0;
+
+#define FLUSHIBP  if (ibp) { intbuff[ibp]=0; out_html(intbuff); ibp=0; }
+
+	exbuffer = buffer;
+	exbuffpos = buffpos;
+	exbuffmax = buffmax;
+	exnewline_for_fun = newline_for_fun;
+	exscaninbuff = scaninbuff;
+	newline_for_fun = 0;
+	if (result) {
+		if (*result) {
+			buffer = *result;
+			buffpos = strlen(buffer);
+			buffmax = buffpos;
+		} else {
+			buffer = stralloc(LARGE_STR_MAX);
+			buffpos = 0;
+			buffmax = LARGE_STR_MAX;
+		}
+		scaninbuff = 1;
+	}
+	h = c;
+	/* start scanning */
+
+	while (*h && (!san || newline_for_fun || *h != '\n')) {
+
+		if (*h == escapesym) {
+			h++;
+			FLUSHIBP;
+			h = scan_escape(h);
+		} else if (*h == controlsym && h[-1] == '\n') {
+			h++;
+			FLUSHIBP;
+			h = scan_request(h);
+			if (san && h[-1] == '\n')
+				h--;
+		} else if (mandoc_line
+			   && *(h) && isupper(*(h))
+			   && *(h + 1) && islower(*(h + 1))
+			   && *(h + 2) && isspace(*(h + 2))) {
+			/*
+			 * BSD embedded command eg ".It Fl Ar arg1 Fl Ar
+			 * arg2"
+			 */
+			FLUSHIBP;
+			h = scan_request(h);
+			if (san && h[-1] == '\n')
+				h--;
+		} else if (*h == nobreaksym && h[-1] == '\n') {
+			h++;
+			FLUSHIBP;
+			h = scan_request(h);
+			if (san && h[-1] == '\n')
+				h--;
+		} else {
+			int     mx;
+
+			if (h[-1] == '\n' && still_dd && isalnum(*h)) {
+				/*
+				 * sometimes a .HP request is not followed by
+				 * a .br request
+				 */
+				FLUSHIBP;
+				out_html("<DD>");
+				curpos = 0;
+				still_dd = 0;
+			}
+			switch (*h) {
+			case '&':
+				intbuff[ibp++] = '&';
+				intbuff[ibp++] = 'a';
+				intbuff[ibp++] = 'm';
+				intbuff[ibp++] = 'p';
+				intbuff[ibp++] = ';';
+				curpos++;
+				break;
+			case '<':
+				intbuff[ibp++] = '&';
+				intbuff[ibp++] = 'l';
+				intbuff[ibp++] = 't';
+				intbuff[ibp++] = ';';
+				curpos++;
+				break;
+			case '>':
+				intbuff[ibp++] = '&';
+				intbuff[ibp++] = 'g';
+				intbuff[ibp++] = 't';
+				intbuff[ibp++] = ';';
+				curpos++;
+				break;
+			case '"':
+				intbuff[ibp++] = '&';
+				intbuff[ibp++] = 'q';
+				intbuff[ibp++] = 'u';
+				intbuff[ibp++] = 'o';
+				intbuff[ibp++] = 't';
+				intbuff[ibp++] = ';';
+				curpos++;
+				break;
+			case '\n':
+				if (h[-1] == '\n' && fillout) {
+					intbuff[ibp++] = '<';
+					intbuff[ibp++] = 'P';
+					intbuff[ibp++] = '>';
+				}
+				if (contained_tab && fillout) {
+					intbuff[ibp++] = '<';
+					intbuff[ibp++] = 'B';
+					intbuff[ibp++] = 'R';
+					intbuff[ibp++] = '>';
+				}
+				contained_tab = 0;
+				curpos = 0;
+				usenbsp = 0;
+				intbuff[ibp++] = '\n';
+				break;
+			case '\t':
+				{
+					int     curtab = 0;
+
+					contained_tab = 1;
+					FLUSHIBP;
+					/* like a typewriter, not like TeX */
+					tabstops[19] = curpos + 1;
+					while (curtab < maxtstop && tabstops[curtab] <= curpos)
+						curtab++;
+					if (curtab < maxtstop) {
+						if (!fillout) {
+							while (curpos < tabstops[curtab]) {
+								intbuff[ibp++] = ' ';
+								if (ibp > 480) {
+									FLUSHIBP;
+								}
+								curpos++;
+							}
+						} else {
+							out_html("<TT>");
+							while (curpos < tabstops[curtab]) {
+								out_html("&nbsp;");
+								curpos++;
+							}
+							out_html("</TT>");
+						}
+					}
+				}
+				break;
+			default:
+				if (*h == ' ' && (h[-1] == '\n' || usenbsp)) {
+					FLUSHIBP;
+					if (!usenbsp && fillout) {
+						out_html("<BR>");
+						curpos = 0;
+					}
+					usenbsp = fillout;
+					if (usenbsp)
+						out_html("&nbsp;");
+					else
+						intbuff[ibp++] = ' ';
+				} else if (*h > 31 && *h < 127)
+					intbuff[ibp++] = *h;
+				else if (((unsigned char) (*h)) > 127) {
+					intbuff[ibp++] = '&';
+					intbuff[ibp++] = '#';
+					intbuff[ibp++] = '0' + ((unsigned char) (*h)) / 100;
+					intbuff[ibp++] = '0' + (((unsigned char) (*h)) % 100) / 10;
+					intbuff[ibp++] = '0' + ((unsigned char) (*h)) % 10;
+					intbuff[ibp++] = ';';
+				}
+				curpos++;
+				break;
+			}
+			if (ibp > (MED_STR_MAX - 20))
+				FLUSHIBP;
+			h++;
+		}
+	}
+	FLUSHIBP;
+	if (buffer)
+		buffer[buffpos] = '\0';
+	if (san && *h)
+		h++;
+	newline_for_fun = exnewline_for_fun;
+	if (result) {
+		*result = buffer;
+		buffer = exbuffer;
+		buffpos = exbuffpos;
+		buffmax = exbuffmax;
+		scaninbuff = exscaninbuff;
+	}
+	return h;
+}
+
+
+static char *
+scan_troff_mandoc(char *c, int san, char **result)
+{
+	char   *ret, *end = c;
+	int     oldval = mandoc_line;
+
+	mandoc_line = 1;
+	while (*end && *end != '\n') {
+		end++;
+	}
+
+	if (end > c + 2
+	    && ispunct(*(end - 1))
+	    && isspace(*(end - 2)) && *(end - 2) != '\n') {
+		/*
+		 * Don't format lonely punctuation E.g. in "xyz ," format the
+		 * xyz and then append the comma removing the space.
+		 */
+		*(end - 2) = '\n';
+		ret = scan_troff(c, san, result);
+		*(end - 2) = *(end - 1);
+		*(end - 1) = ' ';
+	} else {
+		ret = scan_troff(c, san, result);
+	}
+	mandoc_line = oldval;
+	return ret;
+}
+
+int
+main(int argc, char **argv)
+{
+	FILE   *f;
+	char   *t;
+	int     l, i;
+	char   *buf;
+	char   *h, *fullname;
+	STRDEF *stdf;
+
+	t = NULL;
+	while ((i = getopt(argc, argv, "")) != EOF) {
+		switch (i) {
+		default:
+			usage();
+			exit(EXIT_USAGE);
+		}
+	}
+
+	if (argc != 2) {
+		usage();
+		exit(EXIT_USAGE);
+	}
+	manpage = h = t = argv[1];
+	i = 0;
+
+	buf = read_man_page(h);
+	if (!buf) {
+		fprintf(stderr, "man2html: cannot read %s: %s\n", h, strerror(errno));
+		exit(1);
+	}
+#ifdef MAKEINDEX
+	idxfile = fopen(INDEXFILE, "a");
+#endif
+	stdf = &standardchar[0];
+	i = 0;
+	while (stdf->nr) {
+		stdf->next = &standardchar[i];
+		stdf = stdf->next;
+		i++;
+	}
+	chardef = &standardchar[0];
+
+	stdf = &standardstring[0];
+	i = 0;
+	while (stdf->nr) {
+		stdf->next = &standardstring[i];
+		stdf = stdf->next;
+		i++;
+	}
+	strdef = &standardstring[0];
+
+	intdef = &standardint[0];
+	i = 0;
+	while (intdef->nr) {
+		intdef->next = &standardint[i];
+		intdef = intdef->next;
+		i++;
+	}
+	intdef = &standardint[0];
+
+	defdef = NULL;
+
+	scan_troff(buf + 1, 0, NULL);
+
+	while (itemdepth || dl_set[itemdepth]) {
+		out_html("</DL>\n");
+		if (dl_set[itemdepth])
+			dl_set[itemdepth] = 0;
+		else if (itemdepth > 0)
+			itemdepth--;
+	}
+
+	out_html(change_to_font(0));
+	out_html(change_to_size(0));
+	if (!fillout) {
+		fillout = 1;
+		out_html("</PRE>");
+	}
+	out_html(NEWLINE);
+
+	if (output_possible) {
+		outputPageFooter(th_version, th_datestr, th_page_and_sec);
+		/* &nbsp; for mosaic users */
+		fputs("<HR>\n<A NAME=\"index\">&nbsp;</A><H2>Index</H2>\n<DL>\n", stdout);
+		manidx[mip] = 0;
+		fputs(manidx, stdout);
+		if (subs)
+			fputs("</DL>\n", stdout);
+		fputs("</DL>\n", stdout);
+		print_sig();
+		fputs("</BODY>\n</HTML>\n", stdout);
+	} else
+		fprintf(stderr, "man2html: no output produced\n");
+#ifdef MAKEINDEX
+	if (idxfile)
+		fclose(idxfile);
+#endif
+	exit(EXIT_SUCCESS);
+}
diff --git a/support/missing b/support/missing
new file mode 100755
index 0000000..31977a1
--- /dev/null
+++ b/support/missing
@@ -0,0 +1,187 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+# Copyright (C) 1996, 1997 Free Software Foundation, Inc.
+# Franc,ois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+if test $# -eq 0; then
+  echo 1>&2 "Try \`$0 --help' for more information"
+  exit 1
+fi
+
+case "$1" in
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+
+Supported PROGRAM values:
+  aclocal      touch file \`aclocal.m4'
+  autoconf     touch file \`configure'
+  autoheader   touch file \`config.h.in'
+  automake     touch all \`Makefile.in' files
+  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
+  flex         create \`lex.yy.c', if possible, from existing .c
+  lex          create \`lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing - GNU libit 0.0"
+    ;;
+
+  -*)
+    echo 1>&2 "$0: Unknown \`$1' option"
+    echo 1>&2 "Try \`$0 --help' for more information"
+    exit 1
+    ;;
+
+  aclocal)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`acinclude.m4' or \`configure.in'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`configure.in'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`acconfig.h' or \`configure.in'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER([^):]*:\([^)]*\)).*/\1/p' configure.in`
+    if test -z "$files"; then
+      files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^):]*\)).*/\1/p' configure.in`
+      test -z "$files" || files="$files.in"
+    else
+      files=`echo "$files" | sed -e 's/:/ /g'`
+    fi
+    test -z "$files" && files="config.h.in"
+    touch $files
+    ;;
+
+  automake)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'.
+         You might want to install the \`Automake' and \`Perl' packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print \
+      | sed 's/^\(.*\).am$/touch \1.in/' \
+      | sh
+    ;;
+
+  bison|yacc)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.y' file.  You may need the \`Bison' package
+         in order for those modifications to take effect.  You can get
+         \`Bison' from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.y)
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.c
+	    fi
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.h
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f y.tab.h ]; then
+	echo >y.tab.h
+    fi
+    if [ ! -f y.tab.c ]; then
+	echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex|flex)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.l' file.  You may need the \`Flex' package
+         in order for those modifications to take effect.  You can get
+         \`Flex' from any GNU archive site."
+    rm -f lex.yy.c
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.l)
+	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" lex.yy.c
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f lex.yy.c ]; then
+	echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  makeinfo)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.texi' or \`.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy \`make' (AIX,
+         DU, IRIX).  You might want to install the \`Texinfo' package or
+         the \`GNU make' package.  Grab either from any GNU archive site."
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+    fi
+    touch $file
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+         system.  You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequirements for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0
diff --git a/support/mkclone b/support/mkclone
new file mode 100755
index 0000000..1840b03
--- /dev/null
+++ b/support/mkclone
@@ -0,0 +1,122 @@
+#! /bin/bash
+#
+# mkclone - symlink every file appearing in $src/MANIFEST to a corresponding
+#	    file in the target directory ($1).  Directories specified in
+#	    MANIFEST are created in the target directory
+#
+# Copyright (C) 1996-2002 Free Software Foundation, Inc.
+#
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+prog=`basename $0`
+
+SRCDIR=src
+
+USAGE="usage: $prog [-m manifest] [-s srcdir] [-v] [-d] [-h] target"
+while getopts dhm:s:v opt
+do
+	case "$opt" in
+	m)	MANIFEST=$OPTARG ;;
+	s)	SRCDIR=$OPTARG ;;
+	v)	verbose=y ;;
+	d)	ECHO=echo debug=y ;;
+	h)	hardlinks=y ;;
+	?)	echo $USAGE >&2
+		exit 2;;
+	esac
+done
+
+: ${MANIFEST:=${SRCDIR}/MANIFEST}
+
+[ -n "$debug" ] && verbose=
+
+shift $(( $OPTIND - 1 ))
+
+if [ $# -lt 1 ]; then
+	echo $USAGE >&2
+        exit 2
+fi
+
+if [ ! -f $MANIFEST ]; then
+	echo "$prog: $MANIFEST: no such file or directory" >&2
+	echo "$prog: must be run with valid -s argument or from source directory" >&2
+	exit 1
+fi
+
+rm_ltmp=false
+LINKTEMP=`mktemp -t linktmp.XXXXXXXX 2>/dev/null`
+if [ -z "$LINKTEMP" ]; then
+	: ${TMPDIR:=/tmp}
+	LINKTEMP=${TMPDIR}/linktmp.$$
+	rm_ltmp=true
+fi
+
+$rm_ltmp && rm -f ${LINKTEMP}
+# if the user specified hard links, then do that.  otherwise, try to use
+# symlinks if they're present
+if [ -n "$hardlinks" ]; then
+	LN=ln
+elif (ln -s /dev/null ${LINKTEMP}) >/dev/null 2>&1; then
+	LN="ln -s"
+else
+	LN=ln
+fi
+rm -f ${LINKTEMP}
+
+TARGET=$1
+
+if [ ! -d "$TARGET" ]; then
+	mkdir "$TARGET"
+fi
+
+echo "${prog}: creating clone of bash source tree (from $SRCDIR) in $TARGET"
+
+cd "$TARGET" || { echo "${prog}: cannot cd to $TARGET" >&2 ; exit 1; }
+
+while read fname type mode
+do
+	[ -z "$fname" ] && continue
+
+	case "$fname" in
+	\#*)	continue ;;
+	esac
+
+	case "$type" in
+	d)	[ -n "$verbose" ] && echo mkdir $fname
+		$ECHO mkdir $fname ;;		# already in $TARGET
+	f)	fn=${fname##*/}
+		case "$fname" in
+		*/*)	dn=${fname%/*} ;;
+		*)	dn=. ;;
+		esac
+		if [ -n "$verbose" ] || [ -n "$debug" ]; then
+			echo "( cd $dn && $LN $SRCDIR/$fname $fn )"
+		fi
+		[ -z "$debug" ] && ( cd $dn && $LN $SRCDIR/$fname $fn )
+		;;
+	*)	echo "${prog}: ${fname}: unknown file type $type" 1>&2 ;;
+	esac
+done < $MANIFEST
+
+# special
+SPECIAL="parser-built y.tab.c y.tab.h"
+
+rm -f $SPECIAL
+for sf in $SPECIAL
+do
+	[ -n "$verbose" ] && echo cp -p $SRCDIR/$sf $TARGET
+	$ECHO cp -p $SRCDIR/$sf $TARGET
+done
+
+exit 0
diff --git a/support/mkconffiles b/support/mkconffiles
new file mode 100755
index 0000000..59e4c0f
--- /dev/null
+++ b/support/mkconffiles
@@ -0,0 +1,79 @@
+#! /bin/sh
+#
+# mkconffiles - create _distribution and _patchlevel files in preparation
+#		for recreating `configure' from `configure.ac'
+#
+# options:
+#	-s srcdir	directory where `configure' resides (defaults to `.')
+#	-d outdir	directory where the files should be written (defaults
+#			to "$srcdir")
+#	-v		verbose
+#	-n		nocreate - don't create the output files
+#
+# Chet Ramey
+# chet@po.cwru.edu
+
+# Copyright (C) 1996-2002 Free Software Foundation, Inc.
+#
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+PROG=`basename $0`
+
+# defaults
+srcdir=.
+
+distname="_distribution"
+patchname="_patchlevel"
+
+while [ $# -gt 0 ]; do
+	case "$1" in
+	-s)	shift; srcdir="$1"; shift;;
+	-d)	shift; outdir="$1"; shift;;
+	-v)	shift; verbose=yes ;;
+	-n)	shift; nocreate=yes;;
+	--)	shift; break;;
+	*)	echo "${PROG}: usage: ${PROG} [-s srcdir] [-d outdir] [-nv]" >&2; exit 2;;
+	esac
+done
+
+if [ ! -f ${srcdir}/configure ]; then
+	echo "${PROG}: ${srcdir}/configure not found" >&2
+	exit 1
+fi
+
+# default output directory to source directory
+if [ -z "$outdir" ]; then
+	outdir=${srcdir}
+fi
+
+DISTRIB=`grep '^BASHVERS' ${srcdir}/configure | sed 's:.*=::'`
+PATCH=`grep '^BASHPATCH' ${srcdir}/configure | sed 's:.*=::'`
+
+if [ -n "$verbose" ]; then
+	echo "${PROG}: creating new distribution files for bash-${DISTRIB}.${PATCH} in ${outdir}"
+fi
+
+distout=${outdir}/${distname}
+patchout=${outdir}/${patchname}
+
+if [ -z "$nocreate" ]; then
+	echo "$DISTRIB" > $distout
+	echo "$PATCH"   > $patchout
+fi
+
+if [ -n "$verbose" ]; then
+	echo "${PROG}: created $distout and $patchout"
+fi
+
+exit 0
diff --git a/support/mkdirs b/support/mkdirs
new file mode 100755
index 0000000..46f656e
--- /dev/null
+++ b/support/mkdirs
@@ -0,0 +1,47 @@
+#! /bin/sh
+#
+# mkdirs - a work-alike for `mkdir -p'
+#
+# Chet Ramey
+# chet@po.cwru.edu
+
+# Copyright (C) 1996-2002 Free Software Foundation, Inc.
+#
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+for dir
+do
+
+	test -d "$dir" && continue
+
+	tomake=$dir
+	while test -n "$dir" ; do
+		# dir=${dir%/*}
+		# dir=`expr "$dir" ':' '\(/.*\)/[^/]*'`
+		if dir=`expr "$dir" ':' '\(.*\)/[^/]*'`; then
+			tomake="$dir $tomake"
+		else
+			dir=
+		fi
+	done
+
+	for d in $tomake
+	do
+		test -d "$d" && continue
+		echo mkdir "$d"
+		mkdir "$d"
+	done
+done
+
+exit 0
diff --git a/support/mkinstalldirs b/support/mkinstalldirs
new file mode 100755
index 0000000..d2d5f21
--- /dev/null
+++ b/support/mkinstalldirs
@@ -0,0 +1,111 @@
+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+# Author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain
+
+errstatus=0
+dirmode=""
+
+usage="\
+Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
+
+# process command line arguments
+while test $# -gt 0 ; do
+  case $1 in
+    -h | --help | --h*)         # -h for help
+      echo "$usage" 1>&2
+      exit 0
+      ;;
+    -m)                         # -m PERM arg
+      shift
+      test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
+      dirmode=$1
+      shift
+      ;;
+    --)                         # stop option processing
+      shift
+      break
+      ;;
+    -*)                         # unknown option
+      echo "$usage" 1>&2
+      exit 1
+      ;;
+    *)                          # first non-opt arg
+      break
+      ;;
+  esac
+done
+
+for file
+do
+  if test -d "$file"; then
+    shift
+  else
+    break
+  fi
+done
+
+case $# in
+  0) exit 0 ;;
+esac
+
+case $dirmode in
+  '')
+    if mkdir -p -- . 2>/dev/null; then
+      echo "mkdir -p -- $*"
+      exec mkdir -p -- "$@"
+    fi
+    ;;
+  *)
+    if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
+      echo "mkdir -m $dirmode -p -- $*"
+      exec mkdir -m "$dirmode" -p -- "$@"
+    fi
+    ;;
+esac
+
+for file
+do
+  set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+  shift
+
+  pathcomp=
+  for d
+  do
+    pathcomp="$pathcomp$d"
+    case $pathcomp in
+      -*) pathcomp=./$pathcomp ;;
+    esac
+
+    if test ! -d "$pathcomp"; then
+      echo "mkdir $pathcomp"
+
+      mkdir "$pathcomp" || lasterr=$?
+
+      if test ! -d "$pathcomp"; then
+  	errstatus=$lasterr
+      else
+  	if test ! -z "$dirmode"; then
+	  echo "chmod $dirmode $pathcomp"
+    	  lasterr=""
+  	  chmod "$dirmode" "$pathcomp" || lasterr=$?
+
+  	  if test ! -z "$lasterr"; then
+  	    errstatus=$lasterr
+  	  fi
+  	fi
+      fi
+    fi
+
+    pathcomp="$pathcomp/"
+  done
+done
+
+exit $errstatus
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# End:
+# mkinstalldirs ends here
diff --git a/support/mksignames.c b/support/mksignames.c
new file mode 100644
index 0000000..ba87ae8
--- /dev/null
+++ b/support/mksignames.c
@@ -0,0 +1,111 @@
+/* mksignames.c -- Create and write `signames.h', which contains an array of
+   signal names. */
+
+/* Copyright (C) 1992-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#include <sys/types.h>
+#include <signal.h>
+
+#include <stdio.h>
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+/* Duplicated from signames.c */
+#if !defined (NSIG)
+#  define NSIG 64
+#endif
+
+#define LASTSIG NSIG+2
+
+/* Imported from signames.c */
+extern void initialize_signames ();
+extern char *signal_names[];
+
+char *progname;
+
+void
+write_signames (stream)
+     FILE *stream;
+{
+  register int i;
+
+  fprintf (stream, "/* This file was automatically created by %s.\n",
+	   progname);
+  fprintf (stream, "   Do not edit.  Edit support/mksignames.c instead. */\n\n");
+  fprintf (stream,
+	   "/* A translation list so we can be polite to our users. */\n");
+#if defined (CROSS_COMPILING)
+  fprintf (stream, "extern char *signal_names[];\n\n");
+  fprintf (stream, "extern void initialize_signames PARAMS((void));\n\n");
+#else
+  fprintf (stream, "char *signal_names[NSIG + 4] = {\n");
+
+  for (i = 0; i <= LASTSIG; i++)
+    fprintf (stream, "    \"%s\",\n", signal_names[i]);
+
+  fprintf (stream, "    (char *)0x0\n");
+  fprintf (stream, "};\n\n");
+  fprintf (stream, "#define initialize_signames()\n\n");
+#endif
+}
+
+int
+main (argc, argv)
+     int argc;
+     char **argv;
+{
+  char *stream_name;
+  FILE *stream;
+
+  progname = argv[0];
+
+  if (argc == 1)
+    {
+      stream_name = "stdout";
+      stream = stdout;
+    }
+  else if (argc == 2)
+    {
+      stream_name = argv[1];
+      stream = fopen (stream_name, "w");
+    }
+  else
+    {
+      fprintf (stderr, "Usage: %s [output-file]\n", progname);
+      exit (1);
+    }
+
+  if (!stream)
+    {
+      fprintf (stderr, "%s: %s: cannot open for writing\n",
+	       progname, stream_name);
+      exit (2);
+    }
+
+#if !defined (CROSS_COMPILING)
+  initialize_signames ();
+#endif
+  write_signames (stream);
+  exit (0);
+}
diff --git a/support/mkversion.sh b/support/mkversion.sh
new file mode 100755
index 0000000..5960a42
--- /dev/null
+++ b/support/mkversion.sh
@@ -0,0 +1,168 @@
+#! /bin/sh
+
+# Simple program to make new version numbers for the shell.
+# Big deal, but it was getting out of hand to do everything
+# in the makefile.  This creates a file named by the -o option,
+# otherwise everything is echoed to the standard output.
+
+# Copyright (C) 1996-2020 Free Software Foundation, Inc.
+#
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+PROGNAME=`basename $0`
+USAGE="$PROGNAME [-b] [-S srcdir] -d version -p patchlevel [-s status] [-o outfile]"
+
+source_dir="."
+
+while [ $# -gt 0 ]; do
+	case "$1" in
+	-o)	shift; OUTFILE=$1; shift ;;
+	-b)	shift; inc_build=yes ;;
+	-s)	shift; rel_status=$1; shift ;;
+	-p)	shift; patch_level=$1; shift ;;
+	-d)	shift; dist_version=$1; shift ;;
+	-S)	shift; source_dir="$1"; shift ;;
+	*)	echo "$PROGNAME: usage: $USAGE" >&2 ; exit 2 ;;
+	esac
+done
+
+# Required arguments
+if [ -z "$dist_version" ]; then
+	echo "${PROGNAME}: required argument -d missing" >&2
+	echo "$PROGNAME: usage: $USAGE" >&2
+	exit 1
+fi
+
+#if [ -z "$patch_level" ]; then
+#	echo "${PROGNAME}: required argument -p missing" >&2
+#	echo "$PROGNAME: usage: $USAGE" >&2
+#	exit 1
+#fi
+
+# Defaults
+if [ -z "$rel_status" ]; then
+	rel_status="release"
+fi
+
+build_ver=
+if [ -r .build ]; then
+	build_ver=`cat .build`
+fi
+if [ -z "$build_ver" ]; then
+	build_ver=0
+fi
+
+# increment the build version if that's what's required
+
+if [ -n "$inc_build" ]; then
+	build_ver=`expr 1 + $build_ver`
+fi
+
+# what's the patch level?
+if [ -z "$patch_level" ]; then
+	patchlevel_h=$source_dir/patchlevel.h
+	if [ -s $patchlevel_h ]; then
+		patch_level=`cat $patchlevel_h | grep '^#define[ 	]*PATCHLEVEL' | awk '{print $NF}'`
+	fi
+fi
+if [ -z "$patch_level" ]; then
+	patch_level=0
+fi
+
+# If we have an output file specified, make it the standard output
+if [ -n "$OUTFILE" ]; then
+	if exec >$OUTFILE; then
+		:
+	else
+		echo "${PROGNAME}: cannot redirect standard output to $OUTFILE" >&2
+		exit 1
+	fi
+fi
+
+# Output the leading comment.
+echo "/* Version control for the shell.  This file gets changed when you say"
+echo "   \`make version.h' to the Makefile.  It is created by mkversion. */"
+
+# Output the distribution version.  Single numbers are converted to x.00.
+# Allow, as a special case, `[:digit:].[:digit:][:alpha:]' for
+# intermediate versions (e.g., `2.5a').
+# Any characters other than digits and `.' are invalid.
+case "$dist_version" in
+[0-9].[0-9][a-z])	;;	# special case
+*[!0-9.]*)	echo "mkversion.sh: ${dist_version}: bad distribution version" >&2
+		exit 1 ;;
+*.*)	;;
+*)	dist_version=${dist_version}.00 ;;
+esac
+
+dist_major=`echo $dist_version | sed 's:\..*$::'`
+[ -z "${dist_major}" ] && dist_major=0
+
+dist_minor=`echo $dist_version | sed 's:^.*\.::'`
+case "$dist_minor" in
+"")	dist_minor=0 ;;
+[a-z])	dist_minor=0${dist_minor} ;;
+?)	dist_minor=${dist_minor} ;;
+*)	;;
+esac
+
+#float_dist=`echo $dist_version | awk '{printf "%.2f\n", $1}'`
+float_dist=${dist_major}.${dist_minor}
+
+echo
+echo "/* The distribution version number of this shell. */"
+echo "#define DISTVERSION \"${float_dist}\""
+
+# Output the patch level
+#echo
+#echo "/* The patch level of this version of the shell. */"
+#echo "#define PATCHLEVEL ${patch_level}"
+
+# Output the build version
+echo
+echo "/* The last built version of this shell. */"
+echo "#define BUILDVERSION ${build_ver}"
+
+# Output the release status
+echo
+echo "/* The release status of this shell. */"
+echo "#define RELSTATUS \"${rel_status}\""
+
+echo
+echo "/* The default shell compatibility-level (the current version) */"
+echo "#define DEFAULT_COMPAT_LEVEL ${dist_major}${dist_minor}"
+
+# Output the SCCS version string
+sccs_string="${float_dist}.${patch_level}(${build_ver}) ${rel_status} GNU"
+echo
+echo "/* A version string for use by sccs and the what command. */"
+echo "#define SCCSVERSION \"@(#)Bash version ${sccs_string}\""
+
+# extern function declarations
+#echo
+#echo '/* Functions from version.c. */'
+#echo 'extern char *shell_version_string PARAMS((void));'
+#echo 'extern void show_shell_version PARAMS((int));'
+
+if [ -n "$inc_build" ]; then
+	# Make sure we can write to .build
+	if [ -f .build ] && [ ! -w .build ]; then
+		echo "$PROGNAME: cannot write to .build, not incrementing build version" >&2
+	else
+		echo "$build_ver" > .build
+	fi
+fi
+	
+exit 0
diff --git a/support/printenv.c b/support/printenv.c
new file mode 100644
index 0000000..154e086
--- /dev/null
+++ b/support/printenv.c
@@ -0,0 +1,72 @@
+/* printenv -- minimal clone of BSD printenv(1).
+
+   usage: printenv [varname]
+
+   Chet Ramey
+   chet@po.cwru.edu
+*/
+
+/* Copyright (C) 1997-2002 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if defined (HAVE_CONFIG_H)
+#  include  <config.h>
+#endif
+
+#include "bashansi.h"
+#include <stdio.h>		/* puts */
+
+extern char **environ;
+
+int
+main (argc, argv) 
+     int argc;
+     char **argv;
+{
+  register char **envp, *eval;
+  int len;
+
+  argv++;
+  argc--;
+
+  /* printenv */
+  if (argc == 0)
+    {
+      for (envp = environ; *envp; envp++)
+	puts (*envp);
+      exit (0);
+    }
+
+  /* printenv varname */
+  len = strlen (*argv);
+  for (envp = environ; *envp; envp++)
+    {
+      if (**argv == **envp && strncmp (*envp, *argv, len) == 0)
+	{
+	  eval = *envp + len;
+	  /* If the environment variable doesn't have an `=', ignore it. */
+	  if (*eval == '=')
+	    {
+	      puts (eval + 1);
+	      exit (0);
+	    }
+	}
+    }
+  exit (1);
+}
+  
diff --git a/support/printenv.sh b/support/printenv.sh
new file mode 100755
index 0000000..32b7ee8
--- /dev/null
+++ b/support/printenv.sh
@@ -0,0 +1,27 @@
+#! /bin/sh -
+
+# Copyright (C) 1996-2002 Free Software Foundation, Inc.
+#
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+if [ $# -eq 0 ]; then
+	env
+	exit
+elif eval [ "\${$1-unset}" = "unset" ]; then
+	exit 1
+else
+	eval echo \$$1
+	exit 0
+fi
diff --git a/support/recho.c b/support/recho.c
new file mode 100644
index 0000000..7e3c6bc
--- /dev/null
+++ b/support/recho.c
@@ -0,0 +1,67 @@
+/*
+   recho -- really echo args, bracketed with <> and with invisible chars
+	    made visible.
+
+   Chet Ramey
+   chet@po.cwru.edu
+*/
+
+/* Copyright (C) 2002-2005 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if defined (HAVE_CONFIG_H)
+#  include  <config.h>
+#endif
+
+#include "bashansi.h"
+#include <stdio.h>
+
+void strprint();
+
+int
+main(argc, argv)
+int	argc;
+char	**argv;
+{
+	register int	i;
+
+	for (i = 1; i < argc; i++) {
+		printf("argv[%d] = <", i);
+		strprint(argv[i]);
+		printf(">\n");
+	}
+	exit(0);
+}
+
+void
+strprint(str)
+char	*str;
+{
+	register unsigned char *s;
+
+	for (s = (unsigned char *)str; s && *s; s++) {
+		if (*s < ' ') {
+			putchar('^');
+			putchar(*s+64);
+		} else if (*s == 127) {
+			putchar('^');
+			putchar('?');
+		} else
+			putchar(*s);
+	}
+}
diff --git a/support/rlvers.sh b/support/rlvers.sh
new file mode 100755
index 0000000..64cadc7
--- /dev/null
+++ b/support/rlvers.sh
@@ -0,0 +1,113 @@
+#! /bin/sh
+#
+# rlvers.sh -- run a program that prints out the readline version number
+#	       using locally-installed readline libraries
+#
+
+# Copyright (C) 1996-2002 Free Software Foundation, Inc.
+#
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+PROGNAME=`basename $0`
+
+: ${TMPDIR:=/tmp}
+TDIR=$TMPDIR/rlvers
+
+# defaults
+CC=cc
+RL_LIBDIR=/usr/local/lib
+RL_INCDIR=/usr/local/include
+
+TERMCAP_LIB="-ltermcap"
+
+# cannot rely on the presence of getopts
+while [ $# -gt 0 ]; do
+	case "$1" in
+	-C)	shift ; CC="$1"; shift ;;
+	-I)	shift ; RL_INCDIR="$1" ; shift ;;
+	-L)	shift ; RL_LIBDIR="$1" ; shift ;;
+	-T)	shift ; TERMCAP_LIB="$1" ; shift ;;
+	-v)	shift ; verbose=y ;;
+	--)	shift ; break ;;
+	*)	echo "${PROGNAME}: usage: $PROGNAME [-C compiler] [-L libdir] [-v]" >&2 ; exit 2;;
+	esac
+done
+
+# if someone happened to install examples/rlversion, use it (it's not
+# installed by default)
+if test -f ${RL_LIBDIR}/rlversion ; then
+	if [ -n "$verbose" ]; then
+		echo "${PROGNAME}: using installed rlversion from ${RL_LIBDIR}/rlversion"
+	fi
+	v=`${RL_LIBDIR}/rlversion 2>/dev/null`
+	case "$v" in
+	unknown | "")	echo 0 ;;
+	*)		echo "$v" ;;
+	esac
+	exit 0
+fi
+
+if [ -n "$verbose" ]; then
+	echo "${PROGNAME}: using ${RL_LIBDIR} to find libreadline"
+	echo "${PROGNAME}: attempting program compilation"
+fi
+
+# make $TDIR mode 0700
+mkdir $TDIR || {
+	echo "${PROGNAME}: ${TDIR}: file exists" >&2
+	echo 0
+	exit 1
+}
+chmod 700 $TDIR
+
+trap 'rm -f $TDIR/rlvers $TDIR/rlvers.? ; rmdir $TDIR' 0 1 2 3 6 15
+
+cat > $TDIR/rlvers.c << EOF
+#include <stdio.h>
+extern char *rl_library_version;
+
+main()
+{
+	printf("%s\n", rl_library_version ? rl_library_version : "0");
+	exit(0);
+}
+EOF
+
+opwd=`pwd`
+
+cd $TDIR || {
+	echo "${PROGNAME}: cannot cd to $TDIR" >&2
+	echo 0
+	exit 1
+}
+	
+if eval ${CC} -L${RL_LIBDIR} -I${RL_INCDIR} -o $TDIR/rlvers $TDIR/rlvers.c -lreadline ${TERMCAP_LIB};
+then
+	v=`$TDIR/rlvers`
+else
+	if [ -n "$verbose" ] ; then
+		echo "${PROGNAME}: compilation failed: status $?"
+		echo "${PROGNAME}: using version 0"
+	fi
+	v=0
+fi
+
+case "$v" in
+unknown | "")	echo 0 ;;
+*)		echo "$v" ;;
+esac
+
+cd $opwd
+exit 0
diff --git a/support/shobj-conf b/support/shobj-conf
new file mode 100755
index 0000000..5a3f977
--- /dev/null
+++ b/support/shobj-conf
@@ -0,0 +1,553 @@
+#! /bin/sh
+#
+# shobj-conf -- output a series of variable assignments to be substituted
+#		into a Makefile by configure which specify system-dependent
+#		information for creating shared objects that may be loaded
+#		into bash with `enable -f'
+#
+# usage: shobj-conf [-C compiler] -c host_cpu -o host_os -v host_vendor
+#
+# Chet Ramey
+# chet@po.cwru.edu
+
+#   Copyright (C) 1996-2019 Free Software Foundation, Inc.
+#
+#   This file is part of GNU Bash, the Bourne Again SHell.
+#
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+#
+# defaults
+#
+SHOBJ_STATUS=supported
+SHLIB_STATUS=supported
+
+SHOBJ_CC=cc
+SHOBJ_CFLAGS=
+SHOBJ_LD=
+SHOBJ_LDFLAGS=
+SHOBJ_XLDFLAGS=
+SHOBJ_LIBS=
+
+SHLIB_XLDFLAGS=
+SHLIB_LIBS=
+
+SHLIB_DOT='.'
+SHLIB_LIBPREF='lib'
+SHLIB_LIBSUFF='so'
+
+SHLIB_LIBVERSION='$(SHLIB_LIBSUFF)'
+SHLIB_DLLVERSION='$(SHLIB_MAJOR)'
+
+PROGNAME=`basename $0`
+USAGE="$PROGNAME [-C compiler] -c host_cpu -o host_os -v host_vendor"
+
+while [ $# -gt 0 ]; do
+	case "$1" in
+	-C)	shift; SHOBJ_CC="$1"; shift ;;
+	-c)	shift; host_cpu="$1"; shift ;;
+	-o)	shift; host_os="$1"; shift ;;
+	-v)	shift; host_vendor="$1"; shift ;;
+	*)	echo "$USAGE" >&2 ; exit 2;;
+	esac
+done
+
+case "${host_os}-${SHOBJ_CC}-${host_vendor}" in
+nsk-cc-tandem|nsk-c99-tandem)
+	SHOBJ_CFLAGS=-Wglobalized
+	case `uname -m` in
+	NSR*)
+		SHOBJ_CFLAGS="${SHOBJ_CFLAGS} -Wcall_shared" # default on TNS/E, needed on TNS/R
+		SHOBJ_LD=/usr/bin/ld # for TNS/R
+		;;
+	NSE*|NEO*)
+		SHOBJ_LD=/usr/bin/eld
+		;;
+	esac
+	SHOBJ_LDFLAGS='-shared -bglobalized -unres_symbols ignore'
+	;;
+
+sunos4*-*gcc*)
+	SHOBJ_CFLAGS=-fpic
+	SHOBJ_LD=/usr/bin/ld
+	SHOBJ_LDFLAGS='-assert pure-text'
+
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)'
+	;;
+
+sunos4*)
+	SHOBJ_CFLAGS=-pic
+	SHOBJ_LD=/usr/bin/ld
+	SHOBJ_LDFLAGS='-assert pure-text'
+
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)'
+	;;
+
+sunos5*-*gcc*|solaris2*-*gcc*)
+	SHOBJ_LD='${CC}'
+	ld_used=`gcc -print-prog-name=ld`
+	if ${ld_used} -V 2>&1 | grep GNU >/dev/null 2>&1; then
+		# This line works for the GNU ld
+		SHOBJ_LDFLAGS='-shared -Wl,-h,$@'
+		# http://sourceware.org/ml/binutils/2001-08/msg00361.html
+		SHOBJ_CFLAGS=-fPIC
+	else
+		# This line works for the Solaris linker in /usr/ccs/bin/ld
+		SHOBJ_LDFLAGS='-shared -Wl,-i -Wl,-h,$@'
+		SHOBJ_CFLAGS=-fpic
+	fi
+
+#	SHLIB_XLDFLAGS='-R $(libdir)'
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+	;;
+
+sunos5*|solaris2*)
+	SHOBJ_CFLAGS='-K pic'
+	SHOBJ_LD=/usr/ccs/bin/ld
+	SHOBJ_LDFLAGS='-G -dy -z text -i -h $@'
+
+#	SHLIB_XLDFLAGS='-R $(libdir)'
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+	;;
+
+# All versions of Linux (including Gentoo/FreeBSD) or the semi-mythical GNU Hurd.
+linux*-*|gnu*-*|k*bsd*-gnu-*|freebsd*|dragonfly*)
+	SHOBJ_CFLAGS=-fPIC
+	SHOBJ_LD='${CC}'
+	SHOBJ_LDFLAGS='-shared -Wl,-soname,$@'
+
+	SHLIB_XLDFLAGS='-Wl,-rpath,$(libdir) -Wl,-soname,`basename $@ $(SHLIB_MINOR)`'
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)'
+	;;
+
+# Darwin/MacOS X
+darwin*)
+	# Common definitions for all darwin/mac os x versions
+	SHOBJ_CFLAGS='-fno-common'
+
+	SHOBJ_LD='${CC}'
+
+	SHLIB_LIBVERSION='$(SHLIB_MAJOR)$(SHLIB_MINOR).$(SHLIB_LIBSUFF)'
+	SHLIB_LIBSUFF='dylib'
+
+	# unused at this time
+	SHLIB_SONAME='$(libdir)/`echo $@ | sed "s:\\..*::"`.$(SHLIB_MAJOR).$(SHLIB_LIBSUFF)'
+
+	case "${host_os}" in
+	# Darwin versions 1, 5, 6, 7 correspond to Mac OS X 10.0, 10.1, 10.2,
+	# and 10.3, respectively.
+	darwin[1-7].*)
+		SHOBJ_STATUS=unsupported
+		SHOBJ_LDFLAGS='-dynamic'
+		SHLIB_XLDFLAGS='-arch_only `/usr/bin/arch` -install_name $(libdir)/`echo $@ | sed "s:\\..*::"`.$(SHLIB_MAJOR).$(SHLIB_LIBSUFF) -current_version $(SHLIB_MAJOR)$(SHLIB_MINOR) -compatibility_version $(SHLIB_MAJOR)$(SHLIB_MINOR) -v'
+		;;
+	# Darwin 8 == Mac OS X 10.4; Mac OS X 10.N == Darwin N+4
+	*)
+		case "${host_os}" in
+		darwin[89]*|darwin1[012]*)
+			SHOBJ_ARCHFLAGS='-arch_only `/usr/bin/arch`'
+			;;
+		 *) 	# Mac OS X 10.9 (Mavericks) and later
+			SHOBJ_ARCHFLAGS=
+			# for 32 and 64bit universal library
+			#SHOBJ_ARCHFLAGS='-arch i386 -arch x86_64'
+			#SHOBJ_CFLAGS=${SHOBJ_CFLAGS}' -arch i386 -arch x86_64'
+			;;
+		 esac
+		 SHOBJ_LDFLAGS="-dynamiclib -dynamic -undefined dynamic_lookup ${SHOBJ_ARCHFLAGS}"
+		 SHLIB_XLDFLAGS="-dynamiclib ${SHOBJ_ARCHFLAGS}"' -install_name $(libdir)/`echo $@ | sed "s:\\..*::"`.$(SHLIB_MAJOR).$(SHLIB_LIBSUFF) -current_version $(SHLIB_MAJOR)$(SHLIB_MINOR) -compatibility_version $(SHLIB_MAJOR)$(SHLIB_MINOR) -v'
+		;;
+	esac
+
+	SHLIB_LIBS='-lncurses'	# see if -lcurses works on MacOS X 10.1 
+	;;
+
+openbsd*|netbsd*|mirbsd*)
+	SHOBJ_CFLAGS=-fPIC
+	SHOBJ_LD='${CC}'
+	SHOBJ_LDFLAGS='-shared'
+
+	SHLIB_XLDFLAGS='-R$(libdir)'
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)'
+	;;
+
+bsdi2*)
+	SHOBJ_CC=shlicc2
+	SHOBJ_CFLAGS=
+	SHOBJ_LD=ld
+	SHOBJ_LDFLAGS=-r
+	SHOBJ_LIBS=-lc_s.2.1.0
+
+	# BSD/OS 2.x and 3.x `shared libraries' are too much of a pain in
+	# the ass -- they require changing {/usr/lib,etc}/shlib.map on
+	# each system, and the library creation process is byzantine
+	SHLIB_STATUS=unsupported
+	;;
+
+bsdi3*)
+	SHOBJ_CC=shlicc2
+	SHOBJ_CFLAGS=
+	SHOBJ_LD=ld
+	SHOBJ_LDFLAGS=-r
+	SHOBJ_LIBS=-lc_s.3.0.0
+
+	# BSD/OS 2.x and 3.x `shared libraries' are too much of a pain in
+	# the ass -- they require changing {/usr/lib,etc}/shlib.map on
+	# each system, and the library creation process is byzantine
+	SHLIB_STATUS=unsupported
+	;;
+
+bsdi4*)
+	# BSD/OS 4.x now supports ELF and SunOS-style dynamically-linked
+	# shared libraries.  gcc 2.x is the standard compiler, and the
+	# `normal' gcc options should work as they do in Linux.
+
+	SHOBJ_CFLAGS=-fPIC
+	SHOBJ_LD='${CC}'
+	SHOBJ_LDFLAGS='-shared -Wl,-soname,$@'
+
+	SHLIB_XLDFLAGS='-Wl,-soname,`basename $@ $(SHLIB_MINOR)`'
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)'
+	;;
+
+osf*-*gcc*)
+	# Fix to use gcc linker driver from bfischer@TechFak.Uni-Bielefeld.DE
+	SHOBJ_LD='${CC}'
+	SHOBJ_LDFLAGS='-shared -Wl,-soname,$@'
+
+	SHLIB_XLDFLAGS='-rpath $(libdir)'
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+	;;
+
+osf*)
+	SHOBJ_LD=ld
+	SHOBJ_LDFLAGS='-shared -soname $@ -expect_unresolved "*"'
+
+	SHLIB_XLDFLAGS='-rpath $(libdir)'
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+	;;
+
+aix4.[2-9]*-*gcc*|aix[5-9].*-*gcc*)		# lightly tested by jik@cisco.com
+	SHOBJ_CFLAGS=-fpic
+	SHOBJ_LD='ld'
+	SHOBJ_LDFLAGS='-bdynamic -bnoentry -bexpall'
+	SHOBJ_XLDFLAGS='-G'
+
+	SHLIB_XLDFLAGS='-bM:SRE'
+	SHLIB_LIBS='-lcurses -lc'
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+	;;
+
+aix4.[2-9]*|aix[5-9].*)
+	SHOBJ_CFLAGS=-K
+	SHOBJ_LD='ld'
+	SHOBJ_LDFLAGS='-bdynamic -bnoentry -bexpall'
+	SHOBJ_XLDFLAGS='-G'
+
+	SHLIB_XLDFLAGS='-bM:SRE'
+	SHLIB_LIBS='-lcurses -lc'
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+	;;
+
+#
+# THE FOLLOWING ARE UNTESTED -- and some may not support the dlopen interface
+#
+irix[56]*-*gcc*)
+	SHOBJ_CFLAGS='-fpic'
+	SHOBJ_LD='${CC}'
+	SHOBJ_LDFLAGS='-shared -Wl,-soname,$@'
+
+	SHLIB_XLDFLAGS='-Wl,-rpath,$(libdir)'
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+	;;
+
+irix[56]*)
+	SHOBJ_CFLAGS='-K PIC'
+	SHOBJ_LD=ld
+#	SHOBJ_LDFLAGS='-call_shared -hidden_symbol -no_unresolved -soname $@'
+#	Change from David Kaelbling <drk@sgi.com>.  If you have problems,
+#	remove the `-no_unresolved'
+	SHOBJ_LDFLAGS='-shared -no_unresolved -soname $@'
+
+	SHLIB_XLDFLAGS='-rpath $(libdir)'
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+	;;
+
+hpux9*-*gcc*)
+	# must use gcc; the bundled cc cannot compile PIC code
+	SHOBJ_CFLAGS='-fpic'
+	SHOBJ_LD='${CC}'
+	SHOBJ_LDFLAGS='-shared -Wl,-b -Wl,+s'
+
+	SHLIB_XLDFLAGS='-Wl,+b,$(libdir)'
+	SHLIB_LIBSUFF='sl'
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+	;;
+
+hpux9*)
+	SHOBJ_STATUS=unsupported
+	SHLIB_STATUS=unsupported
+
+	# If you are using the HP ANSI C compiler, you can uncomment and use
+	# this code (I have not tested it)
+#	SHOBJ_STATUS=supported
+#	SHLIB_STATUS=supported
+#
+#	SHOBJ_CFLAGS='+z'
+#	SHOBJ_LD='ld'
+#	SHOBJ_LDFLAGS='-b +s'
+#
+#	SHLIB_XLDFLAGS='+b $(libdir)'
+#	SHLIB_LIBSUFF='sl'
+#	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'	
+
+	;;
+
+hpux10*-*gcc*)
+	# must use gcc; the bundled cc cannot compile PIC code
+	SHOBJ_CFLAGS='-fpic'
+	SHOBJ_LD='${CC}'
+	# if you have problems linking here, moving the `-Wl,+h,$@' from
+	# SHLIB_XLDFLAGS to SHOBJ_LDFLAGS has been reported to work
+	SHOBJ_LDFLAGS='-shared -fpic -Wl,-b -Wl,+s'
+
+	SHLIB_XLDFLAGS='-Wl,+h,$@ -Wl,+b,$(libdir)'
+	SHLIB_LIBSUFF='sl'
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+	;;
+
+hpux10*)
+	SHOBJ_STATUS=unsupported
+	SHLIB_STATUS=unsupported
+
+	# If you are using the HP ANSI C compiler, you can uncomment and use
+	# this code (I have not tested it)
+#	SHOBJ_STATUS=supported
+#	SHLIB_STATUS=supported
+#
+#	SHOBJ_CFLAGS='+z'
+#	SHOBJ_LD='ld'
+#	SHOBJ_LDFLAGS='-b +s +h $@'
+#
+#	SHLIB_XLDFLAGS='+b $(libdir)'
+#	SHLIB_LIBSUFF='sl'
+#	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'	
+
+	;;
+
+hpux11*-*gcc*)
+	# must use gcc; the bundled cc cannot compile PIC code
+	SHOBJ_CFLAGS='-fpic'
+	SHOBJ_LD='${CC}'
+#	SHOBJ_LDFLAGS='-shared -Wl,-b -Wl,-B,symbolic -Wl,+s -Wl,+std -Wl,+h,$@'
+	SHOBJ_LDFLAGS='-shared -fpic -Wl,-b -Wl,+s -Wl,+h,$@'
+
+	SHLIB_XLDFLAGS='-Wl,+b,$(libdir)'
+	SHLIB_LIBSUFF='sl'
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+	;;
+
+hpux11*)
+	SHOBJ_STATUS=unsupported
+	SHLIB_STATUS=unsupported
+
+	# If you are using the HP ANSI C compiler, you can uncomment and use
+	# this code from michael.osipov@siemens.com (I have not tested it)
+#	SHOBJ_CFLAGS='+z'
+#	SHOBJ_LD='$(CC)'
+#	SHOBJ_LDFLAGS='-b -Wl,+s -Wl,+h,$@'
+#
+#	SHLIB_XLDFLAGS='-Wl,+b,$(libdir)'
+#	SHLIB_LIBSUFF='so'
+#	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'	
+#	SHLIB_LIBS='$(TERMCAP_LIB)'
+	;;
+
+sysv4*-*gcc*)
+	SHOBJ_CFLAGS=-shared
+	SHOBJ_LDFLAGS='-shared -h $@'
+	SHOBJ_LD='${CC}'
+
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+	;;
+
+sysv4*)
+	SHOBJ_CFLAGS='-K PIC'
+	SHOBJ_LD=ld
+	SHOBJ_LDFLAGS='-dy -z text -G -h $@'
+
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+	;;
+
+sco3.2v5*-*gcc*)
+	SHOBJ_CFLAGS='-fpic'		# DEFAULTS TO ELF
+	SHOBJ_LD='${CC}'
+	SHOBJ_LDFLAGS='-shared'
+
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+	;;
+
+sco3.2v5*)
+	SHOBJ_CFLAGS='-K pic -b elf'
+	SHOBJ_LD=ld
+	SHOBJ_LDFLAGS='-G -b elf -dy -z text -h $@'
+
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+	;;
+
+sysv5uw7*-*gcc*)
+	SHOBJ_CFLAGS='-fpic'
+	SHOBJ_LD='${CC}'
+	SHOBJ_LDFLAGS='-shared'
+
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+	;;
+
+sysv5uw7*)
+	SHOBJ_CFLAGS='-K PIC'
+	SHOBJ_LD=ld
+	SHOBJ_LDFLAGS='-G -dy -z text -h $@'
+
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+	;;
+
+sysv5UnixWare*-*gcc*)
+	SHOBJ_CFLAGS=-fpic
+	SHOBJ_LD='${CC}'
+	SHOBJ_LDFLAGS='-shared'
+
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+	;;
+
+sysv5UnixWare*)
+	SHOBJ_CFLAGS='-K PIC'
+	SHOBJ_LD=ld
+	SHOBJ_LDFLAGS='-G -dy -z text -h $@'
+
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+	;;
+
+sysv5OpenUNIX*-*gcc*)
+	SHOBJ_CFLAGS=-fpic
+	SHOBJ_LD='${CC}'
+	SHOBJ_LDFLAGS='-shared'
+
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+	;;
+
+sysv5OpenUNIX*)
+	SHOBJ_CFLAGS='-K PIC'
+	SHOBJ_LD=ld
+	SHOBJ_LDFLAGS='-G -dy -z text -h $@'
+
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+	;;
+
+dgux*-*gcc*)
+	SHOBJ_CFLAGS=-fpic
+	SHOBJ_LD='${CC}'
+	SHOBJ_LDFLAGS='-shared'
+
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+	;;
+
+dgux*)
+	SHOBJ_CFLAGS='-K pic'
+	SHOBJ_LD=ld
+	SHOBJ_LDFLAGS='-G -dy -h $@'
+
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+	;;
+
+msdos*)
+	SHOBJ_STATUS=unsupported
+	SHLIB_STATUS=unsupported
+	;;
+
+cygwin*)
+	SHOBJ_LD='$(CC)'
+	SHOBJ_LDFLAGS='-shared -Wl,--enable-auto-import -Wl,--enable-auto-image-base -Wl,--export-all -Wl,--out-implib=$(@).a'
+	SHLIB_LIBPREF='cyg'
+	SHLIB_LIBSUFF='dll'
+	SHLIB_LIBVERSION='$(SHLIB_DLLVERSION).$(SHLIB_LIBSUFF)'
+	SHLIB_LIBS='$(TERMCAP_LIB)'
+
+	SHLIB_DOT=
+	# For official cygwin releases, DLLVERSION will be defined in the
+	# environment of configure, and will be incremented any time the API
+	# changes in a non-backwards compatible manner.  Otherwise, it is just
+	# SHLIB_MAJOR.
+	if [ -n "$DLLVERSION" ] ; then
+		SHLIB_DLLVERSION="$DLLVERSION"
+	fi
+	;;
+
+mingw*)
+	SHOBJ_LD='$(CC)'
+	SHOBJ_LDFLAGS='-shared -Wl,--enable-auto-import -Wl,--enable-auto-image-base -Wl,--export-all -Wl,--out-implib=$(@).a'
+	SHLIB_LIBSUFF='dll'
+	SHLIB_LIBVERSION='$(SHLIB_DLLVERSION).$(SHLIB_LIBSUFF)'
+	SHLIB_LIBS='$(TERMCAP_LIB)'
+
+	SHLIB_DOT=
+	# For official cygwin releases, DLLVERSION will be defined in the
+	# environment of configure, and will be incremented any time the API
+	# changes in a non-backwards compatible manner.  Otherwise, it is just
+	# SHLIB_MAJOR.
+	if [ -n "$DLLVERSION" ] ; then
+		SHLIB_DLLVERSION="$DLLVERSION"
+	fi
+	;;
+
+#
+# Rely on correct gcc configuration for everything else
+#
+*-*gcc*)
+	SHOBJ_CFLAGS=-fpic
+	SHOBJ_LD='${CC}'
+	SHOBJ_LDFLAGS='-shared'
+
+	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+	;;
+
+*)
+	SHOBJ_STATUS=unsupported
+	SHLIB_STATUS=unsupported
+	;;
+
+esac
+
+echo SHOBJ_CC=\'"$SHOBJ_CC"\'
+echo SHOBJ_CFLAGS=\'"$SHOBJ_CFLAGS"\'
+echo SHOBJ_LD=\'"$SHOBJ_LD"\'
+echo SHOBJ_LDFLAGS=\'"$SHOBJ_LDFLAGS"\'
+echo SHOBJ_XLDFLAGS=\'"$SHOBJ_XLDFLAGS"\'
+echo SHOBJ_LIBS=\'"$SHOBJ_LIBS"\'
+
+echo SHLIB_XLDFLAGS=\'"$SHLIB_XLDFLAGS"\'
+echo SHLIB_LIBS=\'"$SHLIB_LIBS"\'
+
+echo SHLIB_DOT=\'"$SHLIB_DOT"\'
+
+echo SHLIB_LIBPREF=\'"$SHLIB_LIBPREF"\'
+echo SHLIB_LIBSUFF=\'"$SHLIB_LIBSUFF"\'
+
+echo SHLIB_LIBVERSION=\'"$SHLIB_LIBVERSION"\'
+echo SHLIB_DLLVERSION=\'"$SHLIB_DLLVERSION"\'
+
+echo SHOBJ_STATUS=\'"$SHOBJ_STATUS"\'
+echo SHLIB_STATUS=\'"$SHLIB_STATUS"\'
+
+exit 0
diff --git a/support/signames.c b/support/signames.c
new file mode 100644
index 0000000..aba4842
--- /dev/null
+++ b/support/signames.c
@@ -0,0 +1,446 @@
+/* signames.c -- Create an array of signal names. */
+
+/* Copyright (C) 2006-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#include <stdio.h>
+
+#include <sys/types.h>
+#include <signal.h>
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#if !defined (NSIG)
+#  define NSIG 64
+#endif
+
+/*
+ * Special traps:
+ *	EXIT == 0
+ *	DEBUG == NSIG
+ *	ERR == NSIG+1
+ *	RETURN == NSIG+2
+ */
+#define LASTSIG NSIG+2
+
+char *signal_names[2 * (LASTSIG)];
+
+#define signal_names_size (sizeof(signal_names)/sizeof(signal_names[0]))
+
+/* AIX 4.3 defines SIGRTMIN and SIGRTMAX as 888 and 999 respectively.
+   I don't want to allocate so much unused space for the intervening signal
+   numbers, so we just punt if SIGRTMAX is past the bounds of the
+   signal_names array (handled in configure). */
+#if defined (SIGRTMAX) && defined (UNUSABLE_RT_SIGNALS)
+#  undef SIGRTMAX
+#  undef SIGRTMIN
+#endif
+
+#if defined (SIGRTMAX) || defined (SIGRTMIN)
+#  define RTLEN 14
+#  define RTLIM 256
+#endif
+
+#if defined (BUILDTOOL)
+extern char *progname;
+#endif
+
+void
+initialize_signames ()
+{
+  register int i;
+#if defined (SIGRTMAX) || defined (SIGRTMIN)
+  int rtmin, rtmax, rtcnt;
+#endif
+
+  for (i = 1; i < signal_names_size; i++)
+    signal_names[i] = (char *)NULL;
+
+  /* `signal' 0 is what we do on exit. */
+  signal_names[0] = "EXIT";
+
+  /* Place signal names which can be aliases for more common signal
+     names first.  This allows (for example) SIGABRT to overwrite SIGLOST. */
+
+  /* POSIX 1003.1b-1993 real time signals, but take care of incomplete
+     implementations. Acoording to the standard, both, SIGRTMIN and
+     SIGRTMAX must be defined, SIGRTMIN must be strictly less than
+     SIGRTMAX, and the difference must be at least 7, that is, there
+     must be at least eight distinct real time signals. */
+
+  /* The generated signal names are SIGRTMIN, SIGRTMIN+1, ...,
+     SIGRTMIN+x, SIGRTMAX-x, ..., SIGRTMAX-1, SIGRTMAX. If the number
+     of RT signals is odd, there is an extra SIGRTMIN+(x+1).
+     These names are the ones used by ksh and /usr/xpg4/bin/sh on SunOS5. */
+
+#if defined (SIGRTMIN)
+  rtmin = SIGRTMIN;
+  signal_names[rtmin] = "SIGRTMIN";
+#endif
+
+#if defined (SIGRTMAX)
+  rtmax = SIGRTMAX;
+  signal_names[rtmax] = "SIGRTMAX";
+#endif
+
+#if defined (SIGRTMAX) && defined (SIGRTMIN)
+  if (rtmax > rtmin)
+    {
+      rtcnt = (rtmax - rtmin - 1) / 2;
+      /* croak if there are too many RT signals */
+      if (rtcnt >= RTLIM/2)
+	{
+	  rtcnt = RTLIM/2-1;
+#ifdef BUILDTOOL
+	  fprintf(stderr, "%s: error: more than %d real time signals, fix `%s'\n",
+		  progname, RTLIM, progname);
+#endif
+	}
+
+      for (i = 1; i <= rtcnt; i++)
+	{
+	  signal_names[rtmin+i] = (char *)malloc(RTLEN);
+	  if (signal_names[rtmin+i])
+	    sprintf (signal_names[rtmin+i], "SIGRTMIN+%d", i);
+	  signal_names[rtmax-i] = (char *)malloc(RTLEN);
+	  if (signal_names[rtmax-i])
+	    sprintf (signal_names[rtmax-i], "SIGRTMAX-%d", i);
+	}
+
+      if (rtcnt < RTLIM/2-1 && rtcnt != (rtmax-rtmin)/2)
+	{
+	  /* Need an extra RTMIN signal */
+	  signal_names[rtmin+rtcnt+1] = (char *)malloc(RTLEN);
+	  if (signal_names[rtmin+rtcnt+1])
+	    sprintf (signal_names[rtmin+rtcnt+1], "SIGRTMIN+%d", rtcnt+1);
+	}
+    }
+#endif /* SIGRTMIN && SIGRTMAX */
+
+#if defined (SIGLOST)	/* resource lost (eg, record-lock lost) */
+  signal_names[SIGLOST] = "SIGLOST";
+#endif
+
+/* AIX */
+#if defined (SIGMSG)	/* HFT input data pending */
+  signal_names[SIGMSG] = "SIGMSG";
+#endif
+
+#if defined (SIGDANGER)	/* system crash imminent */
+  signal_names[SIGDANGER] = "SIGDANGER";
+#endif
+
+#if defined (SIGMIGRATE) /* migrate process to another CPU */
+  signal_names[SIGMIGRATE] = "SIGMIGRATE";
+#endif
+
+#if defined (SIGPRE)	/* programming error */
+  signal_names[SIGPRE] = "SIGPRE";
+#endif
+
+#if defined (SIGPHONE)	/* Phone interrupt */
+  signal_names[SIGPHONE] = "SIGPHONE";
+#endif
+
+#if defined (SIGVIRT)	/* AIX virtual time alarm */
+  signal_names[SIGVIRT] = "SIGVIRT";
+#endif
+
+#if defined (SIGTINT)	/* Interrupt */
+  signal_names[SIGTINT] = "SIGTINT";
+#endif
+
+#if defined (SIGALRM1)	/* m:n condition variables */
+  signal_names[SIGALRM1] = "SIGALRM1";
+#endif
+
+#if defined (SIGWAITING)	/* m:n scheduling */
+  signal_names[SIGWAITING] = "SIGWAITING";
+#endif
+
+#if defined (SIGGRANT)	/* HFT monitor mode granted */
+  signal_names[SIGGRANT] = "SIGGRANT";
+#endif
+
+#if defined (SIGKAP)	/* keep alive poll from native keyboard */
+  signal_names[SIGKAP] = "SIGKAP";
+#endif
+
+#if defined (SIGRETRACT) /* HFT monitor mode retracted */
+  signal_names[SIGRETRACT] = "SIGRETRACT";
+#endif
+
+#if defined (SIGSOUND)	/* HFT sound sequence has completed */
+  signal_names[SIGSOUND] = "SIGSOUND";
+#endif
+
+#if defined (SIGSAK)	/* Secure Attention Key */
+  signal_names[SIGSAK] = "SIGSAK";
+#endif
+
+#if defined (SIGCPUFAIL)	/* Predictive processor deconfiguration */
+  signal_names[SIGCPUFAIL] = "SIGCPUFAIL";
+#endif
+
+#if defined (SIGAIO)	/* Asynchronous I/O */
+  signal_names[SIGAIO] = "SIGAIO";
+#endif
+
+#if defined (SIGLAB)	/* Security label changed */
+  signal_names[SIGLAB] = "SIGLAB";
+#endif
+
+/* SunOS5 */
+#if defined (SIGLWP)	/* Solaris: special signal used by thread library */
+  signal_names[SIGLWP] = "SIGLWP";
+#endif
+
+#if defined (SIGFREEZE)	/* Solaris: special signal used by CPR */
+  signal_names[SIGFREEZE] = "SIGFREEZE";
+#endif
+
+#if defined (SIGTHAW)	/* Solaris: special signal used by CPR */
+  signal_names[SIGTHAW] = "SIGTHAW";
+#endif
+
+#if defined (SIGCANCEL)	/* Solaris: thread cancellation signal used by libthread */
+  signal_names[SIGCANCEL] = "SIGCANCEL";
+#endif
+
+#if defined (SIGXRES)	/* Solaris: resource control exceeded */
+  signal_names[SIGXRES] = "SIGXRES";
+#endif
+
+#if defined (SIGJVM1)	/* Solaris: Java Virtual Machine 1 */
+  signal_names[SIGJVM1] = "SIGJVM1";
+#endif
+
+#if defined (SIGJVM2)	/* Solaris: Java Virtual Machine 2 */
+  signal_names[SIGJVM2] = "SIGJVM2";
+#endif
+
+#if defined (SIGDGTIMER1)
+  signal_names[SIGDGTIMER1] = "SIGDGTIMER1";
+#endif
+
+#if defined (SIGDGTIMER2)
+  signal_names[SIGDGTIMER2] = "SIGDGTIMER2";
+#endif
+
+#if defined (SIGDGTIMER3)
+  signal_names[SIGDGTIMER3] = "SIGDGTIMER3";
+#endif
+
+#if defined (SIGDGTIMER4)
+  signal_names[SIGDGTIMER4] = "SIGDGTIMER4";
+#endif
+
+#if defined (SIGDGNOTIFY)
+  signal_names[SIGDGNOTIFY] = "SIGDGNOTIFY";
+#endif
+
+/* Apollo */
+#if defined (SIGAPOLLO)
+  signal_names[SIGAPOLLO] = "SIGAPOLLO";
+#endif
+
+/* HP-UX */
+#if defined (SIGDIL)	/* DIL signal (?) */
+  signal_names[SIGDIL] = "SIGDIL";
+#endif
+
+/* System V */
+#if defined (SIGCLD)	/* Like SIGCHLD.  */
+  signal_names[SIGCLD] = "SIGCLD";
+#endif
+
+#if defined (SIGPWR)	/* power state indication */
+  signal_names[SIGPWR] = "SIGPWR";
+#endif
+
+#if defined (SIGPOLL)	/* Pollable event (for streams)  */
+  signal_names[SIGPOLL] = "SIGPOLL";
+#endif
+
+/* Unknown */
+#if defined (SIGWINDOW)
+  signal_names[SIGWINDOW] = "SIGWINDOW";
+#endif
+
+/* Linux */
+#if defined (SIGSTKFLT)
+  signal_names[SIGSTKFLT] = "SIGSTKFLT";
+#endif
+
+/* FreeBSD */
+#if defined (SIGTHR)	/* thread interrupt */
+  signal_names[SIGTHR] = "SIGTHR";
+#endif
+
+/* Common */
+#if defined (SIGHUP)	/* hangup */
+  signal_names[SIGHUP] = "SIGHUP";
+#endif
+
+#if defined (SIGINT)	/* interrupt */
+  signal_names[SIGINT] = "SIGINT";
+#endif
+
+#if defined (SIGQUIT)	/* quit */
+  signal_names[SIGQUIT] = "SIGQUIT";
+#endif
+
+#if defined (SIGILL)	/* illegal instruction (not reset when caught) */
+  signal_names[SIGILL] = "SIGILL";
+#endif
+
+#if defined (SIGTRAP)	/* trace trap (not reset when caught) */
+  signal_names[SIGTRAP] = "SIGTRAP";
+#endif
+
+#if defined (SIGIOT)	/* IOT instruction */
+  signal_names[SIGIOT] = "SIGIOT";
+#endif
+
+#if defined (SIGABRT)	/* Cause current process to dump core. */
+  signal_names[SIGABRT] = "SIGABRT";
+#endif
+
+#if defined (SIGEMT)	/* EMT instruction */
+  signal_names[SIGEMT] = "SIGEMT";
+#endif
+
+#if defined (SIGFPE)	/* floating point exception */
+  signal_names[SIGFPE] = "SIGFPE";
+#endif
+
+#if defined (SIGKILL)	/* kill (cannot be caught or ignored) */
+  signal_names[SIGKILL] = "SIGKILL";
+#endif
+
+#if defined (SIGBUS)	/* bus error */
+  signal_names[SIGBUS] = "SIGBUS";
+#endif
+
+#if defined (SIGSEGV)	/* segmentation violation */
+  signal_names[SIGSEGV] = "SIGSEGV";
+#endif
+
+#if defined (SIGSYS)	/* bad argument to system call */
+  signal_names[SIGSYS] = "SIGSYS";
+#endif
+
+#if defined (SIGPIPE)	/* write on a pipe with no one to read it */
+  signal_names[SIGPIPE] = "SIGPIPE";
+#endif
+
+#if defined (SIGALRM)	/* alarm clock */
+  signal_names[SIGALRM] = "SIGALRM";
+#endif
+
+#if defined (SIGTERM)	/* software termination signal from kill */
+  signal_names[SIGTERM] = "SIGTERM";
+#endif
+
+#if defined (SIGURG)	/* urgent condition on IO channel */
+  signal_names[SIGURG] = "SIGURG";
+#endif
+
+#if defined (SIGSTOP)	/* sendable stop signal not from tty */
+  signal_names[SIGSTOP] = "SIGSTOP";
+#endif
+
+#if defined (SIGTSTP)	/* stop signal from tty */
+  signal_names[SIGTSTP] = "SIGTSTP";
+#endif
+
+#if defined (SIGCONT)	/* continue a stopped process */
+  signal_names[SIGCONT] = "SIGCONT";
+#endif
+
+#if defined (SIGCHLD)	/* to parent on child stop or exit */
+  signal_names[SIGCHLD] = "SIGCHLD";
+#endif
+
+#if defined (SIGTTIN)	/* to readers pgrp upon background tty read */
+  signal_names[SIGTTIN] = "SIGTTIN";
+#endif
+
+#if defined (SIGTTOU)	/* like TTIN for output if (tp->t_local&LTOSTOP) */
+  signal_names[SIGTTOU] = "SIGTTOU";
+#endif
+
+#if defined (SIGIO)	/* input/output possible signal */
+  signal_names[SIGIO] = "SIGIO";
+#endif
+
+#if defined (SIGXCPU)	/* exceeded CPU time limit */
+  signal_names[SIGXCPU] = "SIGXCPU";
+#endif
+
+#if defined (SIGXFSZ)	/* exceeded file size limit */
+  signal_names[SIGXFSZ] = "SIGXFSZ";
+#endif
+
+#if defined (SIGVTALRM)	/* virtual time alarm */
+  signal_names[SIGVTALRM] = "SIGVTALRM";
+#endif
+
+#if defined (SIGPROF)	/* profiling time alarm */
+  signal_names[SIGPROF] = "SIGPROF";
+#endif
+
+#if defined (SIGWINCH)	/* window changed */
+  signal_names[SIGWINCH] = "SIGWINCH";
+#endif
+
+/* 4.4 BSD */
+#if defined (SIGINFO) && !defined (_SEQUENT_)	/* information request */
+  signal_names[SIGINFO] = "SIGINFO";
+#endif
+
+#if defined (SIGUSR1)	/* user defined signal 1 */
+  signal_names[SIGUSR1] = "SIGUSR1";
+#endif
+
+#if defined (SIGUSR2)	/* user defined signal 2 */
+  signal_names[SIGUSR2] = "SIGUSR2";
+#endif
+
+#if defined (SIGKILLTHR)	/* BeOS: Kill Thread */
+  signal_names[SIGKILLTHR] = "SIGKILLTHR";
+#endif
+
+  for (i = 0; i < NSIG; i++)
+    if (signal_names[i] == (char *)NULL)
+      {
+	signal_names[i] = (char *)malloc (18);
+	if (signal_names[i])
+	  sprintf (signal_names[i], "SIGJUNK(%d)", i);
+      }
+
+  signal_names[NSIG] = "DEBUG";
+  signal_names[NSIG+1] = "ERR";
+  signal_names[NSIG+2] = "RETURN";
+}
diff --git a/support/texi2dvi b/support/texi2dvi
new file mode 100755
index 0000000..17f4355
--- /dev/null
+++ b/support/texi2dvi
@@ -0,0 +1,1996 @@
+#! /bin/sh
+# texi2dvi --- produce DVI (or PDF) files from Texinfo (or (La)TeX) sources.
+#
+# Copyright 1992-2019 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License,
+# or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# Originally written by Noah Friedman.
+#
+# Please send bug reports, etc. to bug-texinfo@gnu.org.
+# If possible, please send a copy of the output of the script called with
+# the `--debug' option when making a bug report.
+
+test -f /bin/ksh && test -z "$RUNNING_KSH" \
+  && { UNAMES=`uname -s`; test "x$UNAMES" = xULTRIX; } 2>/dev/null \
+  && { RUNNING_KSH=true; export RUNNING_KSH; exec /bin/ksh $0 ${1+"$@"}; }
+unset RUNNING_KSH
+
+# No failure shall remain unpunished.
+set -e
+
+# In case the default sed doesn't suffice.
+: ${SED=sed}
+
+program=`echo $0 | $SED -e 's!.*/!!'`
+
+build_mode=${TEXI2DVI_BUILD_MODE:-local}
+build_dir=${TEXI2DVI_BUILD_DIRECTORY:-.}
+
+orig_pwd=`pwd`
+
+# Initialize variables for option overriding and otherwise.
+# Don't use `unset' since old bourne shells don't have this command.
+# Instead, assign them an empty value.
+action=compile
+debug=false
+escape="\\"
+expand=false    # true for expansion via makeinfo
+includes=
+line_error=true # pass --file-line-error to TeX
+max_iters=7     # when to quit
+oname=          # --output
+out_lang=dvi
+quiet=false     # let the tools' message be displayed
+set_language=
+src_specials=
+shell_escape=
+latex2html=hevea  # or set to tex4ht
+textra=         # Extra TeX commands to insert in the input file.
+txiprereq=19990129 # minimum texinfo.tex version with macro expansion
+verb=false      # true for verbose mode
+translate_file= # name of charset translation file
+
+# We have to initialize IFS to space tab newline since we save and
+# restore IFS and apparently POSIX allows stupid/broken behavior with
+# empty-but-set IFS.
+# http://lists.gnu.org/archive/html/automake-patches/2006-05/msg00008.html
+# We need space, tab and newline, in precisely that order.  And don't leave
+# trailing blanks.
+space=' '
+tab='	'
+newline='
+'
+IFS="$space$tab$newline"
+
+: ${EGREP=egrep}
+
+# Systems which define $COMSPEC or $ComSpec use semicolons to separate
+# directories in TEXINPUTS -- except for Cygwin and Msys, where COMSPEC
+# might be inherited, but : is used.
+
+# In the case of Msys, uname returns a value derived from MSYSTEM, as
+# MSYSTEM is user configurable, it is not so safe to use it to detect
+# Msys. It is safer to use OSTYPE, this is why we set MSYSTEM to
+# $OSTYPE before calling uname
+if test -n "$COMSPEC$ComSpec" \
+   && MSYSTEM=$OSTYPE uname | $EGREP -iv 'cygwin|msys' >/dev/null; then
+  path_sep=";"
+else
+  path_sep=":"
+fi
+
+
+# Pacify verbose cds.
+CDPATH=${ZSH_VERSION+.}$path_sep
+
+
+# Now we define numerous functions, with no other executable code.
+# The main program is at the end of the file.
+
+	
+#  Standard help and version functions.
+#
+# usage - display usage and exit successfully.
+usage ()
+{
+  cat <<EOF
+Usage: $program [OPTION]... FILE...
+  or:  texi2pdf [OPTION]... FILE...
+  or:  pdftexi2dvi [OPTION]... FILE...
+
+Run each Texinfo or (La)TeX FILE through TeX in turn until all
+cross-references are resolved, building all indices.  The directory
+containing each FILE is searched for included files.  The suffix of FILE
+is used to determine its language ((La)TeX or Texinfo).  To process
+(e)plain TeX files, set the environment variable LATEX=tex.
+
+When invoked as \`texi2pdf' or given the option --pdf generate PDF output.
+Otherwise, generate DVI.
+
+General options:
+  -D, --debug         turn on shell debugging (set -x)
+  -h, --help          display this help and exit successfully
+  -o, --output=OFILE  leave output in OFILE; only one input FILE is allowed
+  -q, --quiet         no output unless errors
+  -v, --version       display version information and exit successfully
+  -V, --verbose       report on what is done
+  --max-iterations=N  don't process files more than N times [$max_iters]
+  --mostly-clean      remove auxiliary files or directories from
+                          previous runs (but not the output)
+
+Output format:
+      --dvi     output a DVI file [default]
+      --dvipdf  output a PDF file via DVI (using a dvi-to-pdf program)
+      --html    output an HTML file from LaTeX, using HeVeA
+      --info    output an Info file from LaTeX, using HeVeA
+  -p, --pdf     use pdftex or pdflatex for processing
+      --ps      output a PostScript file via DVI (using dvips)
+      --text    output a plain text file from LaTeX, using HeVeA
+
+TeX tuning:
+  -E, --expand               macro expansion using makeinfo
+  -I DIR                     search DIR for Texinfo files
+  -l, --language=LANG        specify LANG for FILE, either latex or texinfo
+      --no-line-error        do not pass --file-line-error to TeX
+      --shell-escape         pass --shell-escape to TeX
+      --src-specials         pass --src-specials to TeX
+      --translate-file=FILE  use given charset translation file for TeX
+  -t, --command=CMD          insert CMD in copy of input file
+
+Build modes:
+  --build=MODE         specify the treatment of auxiliary files [$build_mode]
+      --tidy           same as --build=tidy
+  -c, --clean          same as --build=clean
+      --build-dir=DIR  specify where the tidy compilation is performed;
+                         implies --tidy;
+                         defaults to TEXI2DVI_BUILD_DIRECTORY [$build_dir]
+
+The MODE specifies where the TeX compilation takes place, and, as a
+consequence, how auxiliary files are treated.  The build mode can also
+be set using the environment variable TEXI2DVI_BUILD_MODE.
+
+Valid values of MODE are:
+  \`local'      compile in the current directory, leaving all the auxiliary
+               files around.  This is the traditional TeX use.
+  \`tidy'       compile in a local *.t2d directory, where the auxiliary files
+               are left.  Output files are copied back to the original file.
+  \`clean'      same as \`tidy', but remove the auxiliary directory afterwards.
+               Every compilation therefore requires the full cycle.
+
+The values of these environment variables are used to run the
+corresponding commands, if they are set:
+
+  BIBER BIBTEX DVIPDF DVIPS EGREP HEVEA LATEX MAKEINDEX MAKEINFO
+  PDFLATEX PDFTEX SED T4HT TEX TEX4HT TEXINDEX TEXINDY THUMBPDF_CMD
+
+Regarding --dvipdf, if DVIPDF is not set in the environment, the
+following programs are looked for (in this order): dvipdfmx dvipdfm
+dvipdf dvi2pdf dvitopdf.
+
+If Texinfo is installed on your site, then the command
+
+  info texi2dvi
+  
+should give you access to more documentation.
+
+Report bugs to bug-texinfo@gnu.org,
+general questions and discussion to help-texinfo@gnu.org.
+GNU Texinfo home page: <http://www.gnu.org/software/texinfo/>
+General help using GNU software: <http://www.gnu.org/gethelp/>
+EOF
+  exit 0
+}
+
+
+# version - Display version info and exit successfully.
+version ()
+{
+  cat <<EOF
+texi2dvi (GNU Texinfo 6.7)
+
+Copyright (C) 2019 Free Software Foundation, Inc.
+License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
+This is free software: you are free to change and redistribute it.
+There is NO WARRANTY, to the extent permitted by law.
+EOF
+  exit 0
+}
+
+
+#  Generic auxiliary functions.
+
+# Used to access files and directories after we have changed directory
+# (for --tidy).
+rel=
+
+# Change directory, updating some relative paths.
+cd_dir ()
+{
+  cd "$1"
+
+  # Check if argument or input file is absolute, and if so, make all the path 
+  # variables absolute.
+  use_absolute=false
+  case $1 in
+  [\\/]* | ?:[\\/]*)  # absolute path
+    use_absolute=true ;;
+  esac
+  case $in_input in
+  [\\/]* | ?:[\\/]*)
+    use_absolute=true ;;
+  esac
+
+  if $use_absolute ; then
+    for cdd_dir in work_build workdir t2ddir work_bak in_input in_dir; do
+      eval "$cdd_dir=\`absolute \$$cdd_dir\`"
+    done
+    return
+  fi
+
+  # Replace each path component with ".." and add a single trailing slash.
+  rel=`echo "$1" | \$SED -e 's/[^/\\][^/\\]*/../g' -e 's/[/\\]*$/\//'`
+}
+
+# cd_orig - Return to the original directory.
+cd_orig ()
+{
+  # In case $orig_pwd is on a different drive (for DOS).
+  cd /
+
+  # Return to the original directory so that
+  # - the next file is processed in correct conditions
+  # - the temporary file can be removed
+  cd "$orig_pwd" || exit 1
+
+  rel=
+}
+
+
+# func_dirname FILE - Return the directory part of FILE.
+func_dirname ()
+{
+  dirname "$1" 2>/dev/null \
+  || { echo "$1" | $SED 's!/[^/]*$!!;s!^$!.!'; }
+}
+
+
+# noext FILE - Return FILE with one extension removed:
+#   foo.bar.baz -> foo.bar
+noext ()
+{
+  echo "$1" | $SED -e 's/\.[^/.][^/.]*$//'
+}
+
+
+# absolute NAME - Return an absolute path to NAME.
+absolute ()
+{
+  case $1 in
+   [\\/]* | ?:[\\/]*)
+      # Absolute paths don't need to be expanded.
+      echo "$1"
+      ;;
+   *) absolute_slashes=`echo "$1" | $SED -n 's,.*[^/]\(/*\)$,\1,p'`
+      absolute_rel=$orig_pwd/`func_dirname "$1"`
+      if test -d "$absolute_rel"; then
+        (cd "$absolute_rel" 2>/dev/null \
+         && absolute_name=`pwd`/`basename "$1"`"$absolute_slashes"
+         echo "$absolute_name")
+      else
+        error 1 "not a directory: $absolute_rel"
+      fi
+      ;;
+  esac
+}
+
+
+# ensure_dir DIR1 DIR2... - Make sure given directories exist.
+ensure_dir ()
+{
+  for dir
+  do
+    # Beware that in parallel builds we may have several concurrent
+    # attempts to create the directory.  So fail only if "mkdir"
+    # failed *and* the directory still does not exist.
+    test -d "$dir" \
+      || mkdir "$dir" \
+      || test -d "$dir" \
+      || error 1 "cannot create directory: $dir"
+  done
+}
+
+
+# error EXIT_STATUS LINE1 LINE2... - Report an error and exit with
+#   failure if EXIT_STATUS is non-null.
+error ()
+{
+  error_status="$1"
+  shift
+  report "$@"
+  if test "$error_status" != 0; then
+    exit $error_status
+  fi
+}
+
+
+# findprog PROG - Return true if PROG is somewhere in PATH, else false.
+findprog ()
+{
+  saveIFS="$IFS"
+  IFS=$path_sep  # break path components at the path separator
+  for dir in $PATH; do
+    IFS=$saveIFS
+    # The basic test for an executable is `test -f $f && test -x $f'.
+    # (`test -x' is not enough, because it can also be true for directories.)
+    # We have to try this both for $1 and $1.exe.
+    #
+    # Note: On Cygwin and DJGPP, `test -x' also looks for .exe.  On Cygwin,
+    # also `test -f' has this enhancement, but not on DJGPP.  (Both are
+    # design decisions, so there is little chance to make them consistent.)
+    # Thusly, it seems to be difficult to make use of these enhancements.
+    #
+    if   { test -f "$dir/$1"     && test -x "$dir/$1"; } \
+      || { test -f "$dir/$1.exe" && test -x "$dir/$1.exe"; }; then
+      return 0
+    fi
+  done
+  return 1
+}
+
+# report LINE1 LINE2... - Echo each argument to stderr.
+report ()
+{
+  for i in "$@"
+  do
+    echo >&2 "$0: $i"
+  done
+}
+
+
+# run COMMAND-LINE - Run COMMAND-LINE verbosely, catching errors as failures.
+run ()
+{
+  verbose "Running $@"
+  "$@" 2>&5 1>&2 \
+  || error 1 "$1 failed"
+}
+
+
+# verbose WORD1 WORD2... - Echo concatenated WORDs to stderr, if $verb.
+verbose ()
+{
+  if $verb; then
+    echo >&2 "$0: $@"
+  fi
+}
+
+
+#  Handling lists.
+#
+# list_append LIST-NAME ELEM - Append ELEM to (the contents of) LIST-NAME.
+list_append ()
+{
+  list_name="$1"
+  shift
+  eval set X \$$list_name "$@"
+  shift
+  eval $list_name=\""$@"\"
+}
+
+
+# list_concat_dirs LIST-NAME DIR-LIST - Append to LIST-NAME all the
+# components (including empty ones) from the $path_sep-separated list
+# DIR-LIST.  Make the paths absolute.
+list_concat_dirs ()
+{
+  lcd_list="$1"
+  # Empty path components are meaningful to tex.  We rewrite them as
+  # `EMPTY' so they don't get lost when we split on $path_sep.
+  # Hopefully no one will have an actual directory named EMPTY.
+  lcd_replace_EMPTY="-e 's/^$path_sep/EMPTY$path_sep/g' \
+                     -e 's/$path_sep\$/${path_sep}EMPTY/g' \
+                     -e 's/$path_sep$path_sep/${path_sep}EMPTY${path_sep}/g'"
+  save_IFS=$IFS
+  IFS=$path_sep
+  set x `echo "$2" | eval $SED $lcd_replace_EMPTY`; shift
+  IFS=$save_IFS
+  for lcd_dir
+  do
+    case $lcd_dir in
+      EMPTY)
+       list_append $lcd_list ""
+       ;;
+      *)
+       if test -d $lcd_dir; then
+          dir=`absolute "$lcd_dir"`
+         list_append $lcd_list "$lcd_dir"
+       fi
+       ;;
+    esac
+  done
+}
+
+
+# list_prefix LIST-NAME SEP -> STRING - Return string with each element
+# of LIST-NAME preceded by SEP.
+list_prefix ()
+{
+  lp_separator="$2"
+  eval set X \$$1
+  shift
+  lp_result=''
+  for i
+  do
+    lp_result="$lp_result \"$lp_separator\" \"$i\""
+  done
+  echo "$lp_result"
+}
+
+# list_infix LIST-NAME SEP -> STRING - Same as list_prefix, but a separator.
+list_infix ()
+{
+  eval set X \$$1
+  shift
+  save_IFS="$IFS"
+  IFS=$path_sep
+  echo "$*"
+  IFS=$save_IFS
+}
+
+# list_dir_to_abs LIST-NAME - Convert list to using only absolute dir names.
+# Currently unused, but should replace absolute_filenames some day.
+list_dir_to_abs ()
+{
+  ldta_list="$1"
+  eval set X \$$ldta_list
+  shift
+  ldta_result=''
+  for dir
+  do
+    dir=`absolute "$dir"`
+    test -d "$dir" || continue
+    ldta_result="$ldata_result \"$dir\""
+  done
+  set X $ldta_result; shift
+  eval $ldta_list=\"$@\"
+}
+
+
+#  Language auxiliary functions. 
+#
+# out_lang_set LANG - set $out_lang to LANG (dvi, pdf, etc.), or error.
+out_lang_set ()
+{
+  case $1 in
+    dvi|dvipdf|html|info|pdf|ps|text) out_lang=$1;;
+    *) error 1 "invalid output format: $1";;
+  esac
+}
+
+# out_lang_tex - Return the tex output language (DVI or PDF) for $out_lang.
+out_lang_tex ()
+{
+  case $out_lang in
+    dvi | ps | dvipdf ) echo dvi;;
+    pdf ) echo $out_lang;;
+    html | info | text ) echo $out_lang;;
+    *)    error 1 "invalid out_lang: $1";;
+  esac
+}
+
+# out_lang_ext - Return the extension for $out_lang (pdf, dvi, etc.).
+out_lang_ext ()
+{
+  case $out_lang in
+    dvipdf ) echo pdf;;
+    dvi | html | info | pdf | ps | text ) echo $out_lang;;
+    *)    error 1 "invalid out_lang: $1";;
+  esac
+}
+
+
+#  TeX file auxiliary functions.
+#
+# absolute_filenames TEX-PATH -> TEX-PATH - Convert relative paths to
+# absolute, so we can run in another directory (e.g., in tidy build
+# mode, or during the macro-support detection).
+absolute_filenames ()
+{
+  # Empty path components are meaningful to tex.  We rewrite them as
+  # `EMPTY' so they don't get lost when we split on $path_sep.
+  # Hopefully no one will have an actual directory named EMPTY.
+  af_replace_empty="-e 's/^$path_sep/EMPTY$path_sep/g' \
+                    -e 's/$path_sep\$/${path_sep}EMPTY/g' \
+                    -e 's/$path_sep$path_sep/${path_sep}EMPTY${path_sep}/g'"
+  af_result=`echo "$1" | eval $SED $af_replace_empty`
+  save_IFS=$IFS
+  IFS=$path_sep
+  set x $af_result; shift
+  af_result=
+  af_path_sep=
+  for dir
+  do
+    case $dir in
+      EMPTY)
+        af_result=$af_result$af_path_sep
+        ;;
+      *)
+        if test -d "$dir"; then
+          af_result=$af_result$af_path_sep`absolute "$dir"`
+        else
+          # Even if $dir is not a directory, preserve it in the path.
+          # It might contain metacharacters that TeX will expand in
+          # turn, e.g., /some/path/{a,b,c}.  This will not get the
+          # implicit absolutification of the path, but we can't help that.
+          af_result=$af_result$af_path_sep$dir
+        fi
+        ;;
+    esac
+    af_path_sep=$path_sep
+  done
+  echo "$af_result"
+}
+
+
+# output_base_name FILE - Return the name of FILE, possibly renamed to
+# satisfy --output.  FILE is local, i.e., without any directory part.
+output_base_name ()
+{
+  case $oname in
+    '') echo "$1";;
+     *) obn_out_noext=`noext "$oname"`
+        obn_file_ext=`echo "$1" | $SED 's/^.*\.//'`
+        echo "$obn_out_noext.$obn_file_ext"
+      ;;
+  esac
+}
+
+
+# destdir - Return the directory where the output is expected.
+destdir ()
+{
+  case $oname in
+    '')  echo "$orig_pwd";;
+    *)   dirname "$oname";;
+  esac
+}
+
+
+# move_to_dest FILE... - Move FILE(s) to the place where the user expects.
+# Truly move it, that is, it must not remain in its build location
+# unless that is also the output location.  (Otherwise it might appear
+# as an extra file in make distcheck.)
+#
+# FILE can be the principal output (in which case -o directly applies),
+# or an auxiliary file with the same base name.
+move_to_dest ()
+{
+#  echo "move_to_dest $*, tidy=$tidy, oname=$oname"
+
+  # If we built in place and have no output name, there is nothing to
+  # do, so just return.
+  case $tidy:$oname in
+    false:) return;;
+  esac
+
+  for file
+  do
+    test -f "$file" \
+    || error 1 "no such file or directory: $file"
+    case $tidy:$oname in
+      true:)  mtd_destdir=$orig_pwd
+              mtd_destfile=$mtd_destdir/$file;;
+      true:*) mtd_destfile=`output_base_name "$file"`
+              mtd_destdir=`dirname "$mtd_destfile"`;;
+      false:*) mtd_destfile=$oname
+               mtd_destdir=`dirname "$mtd_destfile"`;;
+    esac
+ 
+    # We want to compare the source location and the output location,
+    # and if they are different, do the move.  But if they are the
+    # same, we must preserve the source.  Since we can't assume
+    # stat(1) or test -ef is available, resort to comparing the
+    # directory names, canonicalized with pwd.  We can't use cmp -s
+    # since the output file might not actually change from run to run;
+    # e.g., TeX DVI output is timestamped to only the nearest minute.
+    mtd_destdir=`cd "$mtd_destdir" && pwd`
+    mtd_destbase=`basename "$mtd_destfile"`
+
+    mtd_sourcedir=`dirname "$file"`
+    mtd_sourcedir=`cd "$mtd_sourcedir" && pwd`
+    mtd_sourcebase=`basename "$file"`
+
+    if test "$mtd_sourcedir/$mtd_sourcebase" != "$mtd_destdir/$mtd_destbase"
+    then
+      verbose "Moving $file to $mtd_destfile"
+      rm -f "$mtd_destfile"
+      mv "$file" "$mtd_destfile"
+    fi
+  done
+}
+
+
+#  Managing xref files.
+#
+# aux_file_p FILE - Echo FILE if FILE is an aux file.
+aux_file_p ()
+{
+  test -f "$1" || return 0
+  case $1 in
+    *.aux) echo "$1";;
+    *)     return 0;;
+  esac
+}
+
+# bibaux_file_p FILE - Echo FILE if FILE contains citation requests.
+bibaux_file_p ()
+{
+  test -s "$1" || return 0
+  if (grep '^\\bibstyle[{]' "$1"   \
+      && grep '^\\bibdata[{]' "$1" \
+      ## The following line is suspicious: fails when there
+      ## are citations in sub aux files.  We need to be
+      ## smarter in this case.
+      ## && grep '^\\citation[{]' "$f"
+      ) >&6 2>&1;
+  then
+    echo "$1"
+  fi
+  return 0
+}
+
+# index_file_p FILE - Echo FILE if FILE is an index file.
+index_file_p ()
+{
+  test -f "$1" || return 0
+  case $in_lang:$latex2html:`out_lang_tex`:`$SED '1q' "$1"` in
+    # When working with TeX4HT, *.idx are created by LaTeX.  They must
+    # be processed to produce *.4ix, *.4dx files.  The *.4dx file is
+    # passed to makeindex to produce the *.ind file.  This sequence is
+    # handled by run_index, so we are only interested in the *.idx
+    # files, which have each "\indexentry" preceded by a
+    # "\beforeentry".
+    latex:tex4ht:html:"\\beforeentry {"*) echo $1;;
+
+    # When index.sty is used, there is a space before the brace.
+    latex:*:*:"\\indexentry{"*|latex:*:*:"\\indexentry {"*) echo $1;;
+
+    texinfo:*:*:"\\entry{"*) echo $1;;
+    texinfo:*:*:"@entry{"*) echo $1;;
+    # @entry is output from newer versions of texinfo.tex
+  esac
+  return 0
+}
+
+########### not used currently
+# xref_file_p FILE - Return success if FILE is an xref file (indexes,
+# tables and lists).
+xref_file_p ()
+{
+  test -f "$1" || return 1
+  # If the file is not suitable to be an index or xref file, don't
+  # process it.  It's suitable if the first character is a
+  # backslash or right quote or at, as long as the first line isn't
+  # \input texinfo.
+  case `$SED '1q' "$1"` in
+    "\\input texinfo"*) return 1;;
+    [\\''@]*)           return 0;;
+           *)           return 1;;
+  esac
+}
+
+
+# Used in generated_files_get
+generated_files_get_from_log ()
+{
+  if test -f "$1.log"; then
+    # Usually the output is like: \openout1 = `foobar.tex'.
+    # (including the final period)
+    # but luatex outputs: \openout1 = foobar.tex
+    # (no quotes, no period).
+    # So we have to make the punctuation optional.
+    grep '^\\openout[0-9]' "$1.log" \
+      | $SED -e "s/\\\\openout[^=]*= *[\`']*//" \
+           -e "s/'\.$//"
+  fi
+}
+
+# Used in generated_files_get
+generated_files_get_from_fls ()
+{
+  if test -f "$1.fls"; then
+    grep '^OUTPUT ' "$1.fls" | cut -b 8- \
+      | grep -v '\.dvi$' | grep -v '\.log$' | grep -v '\.pdf$' || true
+  fi
+}
+
+# generated_files_get - Output the list of files generated by the TeX 
+#                       compilation.
+generated_files_get ()
+{
+  $generated_files_get_method "$in_noext"
+  if test $generated_files_get_method = generated_files_get_from_fls; then
+    if test -r "$in_noext.fl"; then
+      report 'WARNING!!  The fl index may typeset as garbage!' # goes to stderr
+      report 'Try upgrading your version of texinfo.tex, or else try setting'
+      report 'the environment variable TEXI2DVI_USE_RECORDER to '\''no'\''.'
+report 'Once you'\''ve done that, delete the file with an '\''fl'\'' extension.'
+    fi
+  fi
+}
+
+
+# xref_files_save - set xref_files_orig from xref_files_new, and save xref 
+#                   files in $work_bak.
+xref_files_save ()
+{
+  # Save copies of auxiliary files for later comparison.
+  xref_files_orig=$xref_files_new
+  if test -n "$xref_files_orig"; then
+    verbose "Backing up xref files: $xref_files_orig"
+    # The following line improves `cp $xref_files_orig "$work_bak"'
+    # by preserving the directory parts.  Think of
+    # cp chap1/main.aux chap2/main.aux $work_bak.
+    #
+    # Users may have, e.g., --keep-old-files.  Don't let this interfere.
+    # (Don't use unset for the sake of ancient shells.)
+    TAR_OPTIONS=; export TAR_OPTIONS
+    tar cf - $xref_files_orig | (cd "$rel$work_bak" && tar xf -)
+  fi
+
+  # Remove auxiliary files in same directory as main input file.  Otherwise,
+  # these will likely be read instead of those in the build dir.
+  if $tidy ; then
+    secondary_xref_files=`sorted_index_files`
+    for f in $xref_files_new $secondary_xref_files ; do
+      if test -f "$rel$in_dir/$f" ; then
+        remove $rel$in_dir/$f
+      fi
+    done
+  fi
+}
+
+
+# xref_files_changed - Return success if the xref files have changed
+# since the previous run.
+xref_files_changed ()
+{
+  # LaTeX (and the package changebar) report in the LOG file if it
+  # should be rerun.  This is needed for files included from
+  # subdirs, since texi2dvi does not try to compare xref files in
+  # subdirs.  Performing xref files test is still good since LaTeX
+  # does not report changes in xref files.
+  if grep "Rerun to get" "$in_noext.log" >&6 2>&1; then
+    return 0
+  fi
+  # Similarly, check for biblatex report of whether rerunning is needed.
+  if grep "biblatex.*(re)run" "$in_noext.log" >&6 2>&1; then
+    return 0
+  fi
+
+  # If old and new lists don't have the same file list,
+  # then something has definitely changed.
+  xref_files_new=`generated_files_get`
+  verbose "Original xref files = $xref_files_orig"
+  verbose "New xref files      = $xref_files_new"
+  if test "x$xref_files_orig" != "x$xref_files_new"; then
+    return 0
+  fi
+
+  # Compare each file until we find a difference.
+  for this_file in $xref_files_new; do
+    verbose "Comparing xref file `echo $this_file | $SED 's|\./||g'` ..."
+    # cmp -s returns nonzero exit status if files differ.
+    if cmp -s "$this_file" "$rel$work_bak/$this_file"; then :; else
+      verbose "xref file `echo $this_file | $SED 's|\./||g'` differed ..."
+      if $debug; then
+        diff -u "$rel$work_bak/$this_file" "$this_file"
+      fi
+      return 0
+    fi
+  done
+
+  secondary_xref_files=`sorted_index_files`
+  verbose "Secondary xref files = $secondary_xref_files"
+  for this_file in $secondary_xref_files; do
+    if test -f $this_file; then :; else
+      verbose "$this_file missing ..."
+      return 0
+    fi
+  done
+
+  # No change.
+  return 1
+}
+
+#  Running the TeX suite.
+#
+# Set tex_cmd variable, for running TeX.
+make_tex_cmd ()
+{
+  case $in_lang:$latex2html:`out_lang_tex` in
+    latex:*:dvi|latex:tex4ht:html)
+        tex=${LATEX:-latex};;
+    latex:*:pdf)
+        tex=${PDFLATEX:-pdflatex};;
+    texinfo:*:dvi)
+        # MetaPost also uses the TEX environment variable.  If the user
+        # has set TEX=latex for that reason, don't bomb out.
+        case $TEX in
+          *latex) tex=tex;; # don't bother trying to find etex
+               *) tex=$TEX
+        esac;;
+    texinfo:*:pdf) tex=$PDFTEX;;
+    *) error 1 "$out_lang not supported for $in_lang";;
+  esac
+
+  # Beware of aux files in subdirectories that require the
+  # subdirectory to exist.
+  case $in_lang:$tidy in
+    latex:true)
+       $SED -n 's|^[ ]*\\include{\(.*\)/.*}.*|\1|p' "$in_input" |
+       sort -u |
+       while read d
+       do
+         ensure_dir "$work_build/$d"
+       done
+       ;;
+  esac
+
+  # Note that this will be used via an eval: quote properly.
+  tex_cmd="$tex"
+
+  # If possible, make TeX report error locations in GNU format.
+  if $line_error; then
+    if test "${tex_help:+set}" != set; then
+      # Go to a temporary directory to try --help, since old versions that
+      # don't accept --help will generate a texput.log.
+      tex_help_dir=$t2ddir/tex_help
+      ensure_dir "$tex_help_dir"
+      tex_help=`cd "$tex_help_dir" >&6 && $tex --help </dev/null 2>&1 || true`
+    fi
+    # The mk program and perhaps others want to parse TeX's
+    # original error messages.
+    case $tex_help in
+      *file-line-error*) tex_cmd="$tex_cmd --file-line-error";;
+    esac
+  fi
+
+  # Tell TeX about -recorder option, if specified
+  # recorder_option_maybe is in { " -recorder", "" }
+  tex_cmd="$tex_cmd$recorder_option_maybe"
+  
+  
+  # Tell TeX about TCX file, if specified.
+  test -n "$translate_file" \
+                       && tex_cmd="$tex_cmd --translate-file=$translate_file"
+
+  # Tell TeX to make source specials (for backtracking from output to
+  # source, given a sufficiently smart editor), if specified.
+  test -n "$src_specials" && tex_cmd="$tex_cmd $src_specials"
+
+  # Tell TeX to allow running external executables
+  test -n "$shell_escape" && tex_cmd="$tex_cmd $shell_escape"
+
+  # Run without interaction.
+  # \batchmode does not show terminal output at all, so we don't
+  # want that.  And even in batch mode, TeX insists on having input
+  # from the user.  Close its stdin to make it impossible.
+  tex_cmd="$tex_cmd </dev/null '${escape}nonstopmode'"
+}
+
+
+# run_tex - Run TeX, taking care of errors and logs.
+run_tex ()
+{
+  # Check for any unusual characters in the filename.
+  # However, >, \ and any whitespace characters are not supported
+  # filenames.
+  in_input_funnies=`echo "$in_input" \
+    | $SED -e 's![^}#$%&^_{~]!!g' -e 's!\(.\)!\1\''
+!g' | uniq`
+
+  if test -n "$in_input_funnies" ; then
+    # Make > an end group character, as it's unlikely to appear in
+    # a filename.
+    tex_cmd="$tex_cmd '${escape}bgroup${escape}catcode62=2${escape}relax'"
+
+    # If the filename has funny characters, change the TeX category codes of 
+    # some characters within a group, and use \expandafter to input the file
+    # outside of the group.
+    for w in $in_input_funnies ; do
+      tex_cmd="$tex_cmd '${escape}catcode\`${escape}$w=12${escape}relax'"
+    done
+
+    # Set \toks0 to "\input FILENAME\relax"
+    tex_cmd="$tex_cmd '${escape}toks0${escape}bgroup${escape}input' '$rel$in_input' '${escape}relax>"
+
+    # Expand \toks0 after the end of the group
+    tex_cmd="$tex_cmd${escape}expandafter${escape}egroup"
+    tex_cmd="$tex_cmd${escape}the${escape}toks0${escape}relax'"
+  else
+    # In the case of a simple filename, just pass the filename
+    # with no funny tricks.
+    tex_cmd="$tex_cmd '${escape}input' '$rel$in_input'"
+  fi
+
+  verbose "$0: Running $tex_cmd ..."
+  if (eval "$tex_cmd" >&5); then
+    case $out_lang in
+      dvi | pdf ) move_to_dest "$in_noext.$out_lang";;
+    esac
+  else
+    tex_failed=true
+  fi
+}
+
+
+# run_bibtex - Run bibtex (or biber) on current file
+# - if its input (AUX) exists,
+# - or if some citations are missing (LOG contains `Citation'),
+# - or if the LOG complains of a missing .bbl.
+#
+# Don't try to be too smart:
+# 1. Running bibtex only if the bbl file exists and is older than
+# the LaTeX file is wrong, since the document might include files
+# that have changed.
+#
+# 2. Because there can be several AUX (if there are \include's),
+# but a single LOG, looking for missing citations in LOG is
+# easier, though we take the risk of matching false messages.
+run_bibtex ()
+{
+  case $in_lang in
+    latex)   bibtex=${BIBTEX:-bibtex};;
+    texinfo) return;;
+  esac
+
+  # "Citation undefined" is for LaTeX, "Undefined citation" for btxmac.tex.
+  # The no .aux && \bibdata test is also for btxmac, in case it was the
+  # first run of a bibtex-using document.  Otherwise, it's possible that
+  # bibtex would never be run.
+  if test -r "$in_noext.aux" \
+     && test -r "$in_noext.log" \
+     && ( (grep 'Warning:.*Citation.*undefined' "$in_noext.log" \
+          || grep '.*Undefined citation' "$in_noext.log" \
+          || grep 'No file .*\.bbl\.' "$in_noext.log") \
+          || (grep 'No \.aux file' "$in_noext.log" \
+              && grep '^\\bibdata' "$in_noext.aux") ) \
+        >&6 2>&1; \
+  then
+    bibtex_aux=`filter_files bibaux_file_p`
+    for f in $bibtex_aux; do
+      run $bibtex "$f"
+    done
+  fi
+
+  # biber(+biblatex) check.
+  if test -r "$in_noext.bcf" \
+     && grep '</bcf:controlfile>' "$in_noext.bcf" >/dev/null; then
+    run ${BIBER:-biber} "$in_noext"
+  fi
+}
+
+
+# filter_file PREDICATE - Go through the list of files in xref_files_new
+# and use PREDICATE on each one to optionally print it or print other files 
+# based on the filename.
+filter_files ()
+{
+  test -n "$xref_files_new" || return 0
+  echo "$xref_files_new" |
+  # Filter existing files matching the criterion.
+  #
+  while read file; do
+    $1 "$file"
+  done |
+  sort |
+  # Some files are opened several times, e.g., listings.sty's *.vrb.
+  uniq
+}
+
+# run_index - Run texindex (or makeindex or texindy) on current index
+# files.  If they already exist, and after running TeX a first time the
+# index files don't change, then there's no reason to run TeX again.
+# But we won't know that if the index files are out of date or nonexistent.
+run_index ()
+{
+  index_files=`filter_files index_file_p`
+  test -n "$index_files" \
+  || return 0
+
+  : ${MAKEINDEX:=makeindex}
+  : ${TEXINDEX:=texindex}
+  : ${TEXINDY:=texindy}
+
+  case $in_lang:$latex2html:`out_lang_tex` in
+    latex:tex4ht:html)
+      for index_file in $index_files
+      do
+        index_noext=`noext "$index_file"`
+        run tex \
+            '\def\filename{{'"$index_noext"'}{idx}{4dx}{ind}}
+             \input idxmake.4ht'
+        run $MAKEINDEX -o $index_noext.ind $index_noext.4dx
+      done
+      ;;
+
+    latex:*)
+      if $TEXINDY --version >&6 2>&1; then
+        run $TEXINDY $index_files
+      else
+        run $MAKEINDEX $index_files
+      fi
+      ;;
+
+    texinfo:*)
+      run $TEXINDEX $index_files
+      ;;
+  esac
+}
+
+
+# run_tex4ht - Run the last two phases of TeX4HT: tex4ht extracts the
+# HTML from the instrumented DVI file, and t4ht converts the figures and
+# installs the files when given -d.
+#
+# Because knowing exactly which files are created is complex (in
+# addition the names are not simple to compute), which makes it
+# difficult to install the output files in a second step, we
+# tell t4ht to install the output files.
+run_tex4ht ()
+{
+  case $in_lang:$latex2html:`out_lang_tex` in
+    latex:tex4ht:html)
+      : ${TEX4HT:=tex4ht} ${T4HT:=t4ht}
+      run "$TEX4HT" "-f/$in_noext"
+      # Do not remove the / after the destdir.
+      run "$T4HT" "-d`destdir`/" "-f/$in_noext"
+      ;;
+  esac
+}
+
+
+# run_thumbpdf - Run thumbpdf.
+run_thumbpdf ()
+{
+  if test `out_lang_tex` = pdf \
+     && test -r "$in_noext.log" \
+     && grep 'thumbpdf\.sty'  "$in_noext.log" >&6 2>&1; \
+  then
+    thumbpdf=${THUMBPDF_CMD:-thumbpdf}
+    thumbcmd="$thumbpdf $in_dir/$in_noext"
+    verbose "Running $thumbcmd ..."
+    if $thumbcmd >&5; then
+      run_tex
+    else
+      report "$thumbpdf exited with bad status." \
+             "Ignoring its output."
+    fi
+  fi
+}
+
+
+# run_dvipdf FILE.dvi - Convert FILE.dvi to FILE.pdf.
+run_dvipdf ()
+{
+  # Find which dvi->pdf program is available.
+  if test -n "$DVIPDF"; then
+    dvipdf=$DVIPDF  # user envvar, use it without checking
+
+  elif test -z "$dvipdf"; then
+    for i in dvipdfmx dvipdfm dvipdf dvi2pdf dvitopdf; do
+      if findprog $i; then
+        dvipdf=$i
+      fi
+    done
+  fi
+  # These tools have varying interfaces, some 'input output', others
+  # 'input -o output'.  They all seem to accept 'input' only,
+  # outputting using the expected file name.
+  run $dvipdf "$1"
+  if test ! -f `echo "$1" | $SED -e 's/\.dvi$/.pdf/'`; then
+    error 1 "cannot find output file"
+  fi
+}
+
+# run_tex_suite - Run the TeX tools until a stable point is reached.
+run_tex_suite ()
+{
+  make_tex_cmd
+
+  # Move to the working directory.
+  if $tidy; then
+    verbose "cd $work_build"
+    cd_dir "$work_build" || exit 1
+  fi
+
+  # Count the number of cycles.
+  suite_cycle=0
+
+  # Start by checking the log files for what files were created last
+  # time.  This will mean that if they don't change, we finish in 1 cycle.
+  xref_files_new=`generated_files_get`
+  xref_files_save
+
+  while :; do
+    # check for (probably) LaTeX loop (e.g. varioref)
+    if test $suite_cycle -eq "$max_iters"; then
+      error 0 "Maximum of $max_iters cycles exceeded"
+      break
+    fi
+
+    # report progress
+    suite_cycle=`expr $suite_cycle + 1`
+    verbose "Cycle $suite_cycle for $command_line_filename"
+
+    tex_failed=false
+    run_core_conversion
+    xref_files_changed || break
+    xref_files_save
+
+    # We run bibtex first, because it's more likely for the indexes
+    # to change after bibtex is run than the reverse, though either
+    # would be rare.
+    run_bibtex
+    run_index
+  done
+
+  if $tex_failed ; then
+    # TeX failed, and the xref files did not change.
+    error 1 "$tex exited with bad status, quitting."
+  fi
+
+  # If we were using thumbpdf and producing PDF, then run thumbpdf
+  # and TeX one last time.
+  run_thumbpdf
+
+  # If we are using tex4ht, call it.
+  run_tex4ht
+
+  # Install the result if we didn't already (i.e., if the output is
+  # dvipdf or ps).
+  case $latex2html:$out_lang in
+    *:dvipdf)
+      run_dvipdf "$in_noext.`out_lang_tex`"
+      move_to_dest "$in_noext.`out_lang_ext`"
+      ;;
+    *:ps)
+      : ${DVIPS:=dvips}
+      run $DVIPS -o "$in_noext.`out_lang_ext`" "$in_noext.`out_lang_tex`"
+      move_to_dest "$in_noext.`out_lang_ext`"
+      ;;
+  esac
+
+  cd_orig
+}
+
+
+#  TeX processing auxiliary tools.
+#
+# run_makeinfo - Expand macro commands in the original source file using
+# Makeinfo.  Always use `end' footnote style, since the `separate' style
+# generates different output (arguably this is a bug in -E).  Discard
+# main info output, the user asked to run TeX, not makeinfo.
+run_makeinfo ()
+{
+  test $in_lang = texinfo \
+    || return 0
+
+  # Unless required by the user, makeinfo expansion is wanted only
+  # if texinfo.tex is too old.
+  if $expand; then
+    makeinfo=${MAKEINFO:-makeinfo}
+  else
+    # Check if texinfo.tex performs macro expansion by looking for
+    # its version.  The version is a date of the form YEAR-MO-DA.
+    # We don't need to use [0-9] to match the digits since anyway
+    # the comparison with $txiprereq, a number, will fail with non-digits.
+    # Run in a temporary directory to avoid leaving files.
+    version_test_dir=$t2ddir/version_test
+    ensure_dir "$version_test_dir"
+    if (
+       cd "$version_test_dir"
+       echo '\input texinfo.tex @bye' >txiversion.tex
+       # Be sure that if tex wants to fail, it is not interactive:
+       # close stdin.
+       $TEX txiversion.tex </dev/null >txiversion.out 2>txiversion.err
+    ); then :; else
+      report "texinfo.tex appears to be broken.
+This may be due to the environment variable TEX set to something
+other than (plain) tex, a corrupt texinfo.tex file, or 
+to tex itself simply not working."
+      cat "$version_test_dir/txiversion.out"
+      cat "$version_test_dir/txiversion.err" >&2
+      error 1 "quitting."
+    fi
+    eval `$SED -n 's/^.*\[\(.*\)version \(....\)-\(..\)-\(..\).*$/txiformat=\1 txiversion="\2\3\4"/p' "$version_test_dir/txiversion.out"`
+    verbose "texinfo.tex preloaded as \`$txiformat', version is \`$txiversion' ..."
+    if test "$txiprereq" -le "$txiversion" >&6 2>&1; then
+      makeinfo=
+    else
+      makeinfo=${MAKEINFO:-makeinfo}
+    fi
+    # If TeX is preloaded, offer the user this convenience:
+    if test "$txiformat" = Texinfo; then
+      escape=@
+    fi
+  fi
+
+  if test -n "$makeinfo"; then
+    # in_src: the file with macros expanded.
+    # Use the same basename to generate the same aux file names.
+    work_src=$workdir/src
+    ensure_dir "$work_src"
+    in_src=$work_src/$in_base
+    run_mi_includes=`list_prefix includes -I`
+    verbose "Macro-expanding $command_line_filename to $in_src ..."
+    # eval $makeinfo because it might be defined as something complex
+    # (running missing) and then we end up with things like '"-I"',
+    # and "-I" (including the quotes) is not an option name.  This
+    # happens with gettext 0.14.5, at least.
+    $SED "$comment_iftex" "$command_line_filename" \
+      | eval $makeinfo --footnote-style=end -I "$in_dir" $run_mi_includes \
+        -o /dev/null --macro-expand=- \
+      | $SED "$uncomment_iftex" >"$in_src"
+    # Continue only if everything succeeded.
+    if test $? -ne 0 \
+       || test ! -r "$in_src"; then
+      verbose "Expansion failed, ignored...";
+    else
+      in_input=$in_src
+    fi
+  fi
+}
+
+# Unfortunately, makeinfo --iftex --no-ifinfo doesn't work well enough
+# in versions before 5.0, as makeinfo can't parse the TeX commands
+# inside @tex blocks, so work around with sed.
+#
+# This sed script preprocesses Texinfo sources in order to keep the
+# iftex sections only.  We want to remove non-TeX sections, and comment
+# (with `@c _texi2dvi') TeX sections so that makeinfo does not try to
+# parse them.  Nevertheless, while commenting TeX sections, don't
+# comment @macro/@end macro so that makeinfo does propagate them.
+# Similarly, preserve the @top node to avoid makeinfo complaining about
+# it being missed.  Comment it out after preprocessing, so that it does
+# not appear in the generated document.
+#
+# We assume that `@c _texi2dvi' or `@c (_texi2dvi)' starting a line is
+# not present in the document.  Additionally, conditionally defined
+# macros inside the @top node may end up with the wrong value, although
+# this is unlikely in practice.
+#
+comment_iftex=\
+'/^@tex/,/^@end tex/{
+  s/^/@c _texi2dvi/
+}
+/^@iftex/,/^@end iftex/{
+  s/^/@c _texi2dvi/
+  /^@c _texi2dvi@macro/,/^@c _texi2dvi@end macro/{
+    s/^@c _texi2dvi//
+  }
+}
+/^@ifnottex/,/^@end ifnottex/{
+  s/^/@c (_texi2dvi)/
+  /^@c (_texi2dvi)@node Top/,/^@c (_texi2dvi)@end ifnottex/ {
+    /^@c (_texi2dvi)@end ifnottex/b
+    s/^@c (_texi2dvi)//
+  }
+}
+/^@ifinfo/,/^@end ifinfo/{
+  /^@node/p
+  /^@menu/,/^@end menu/p
+  t
+  s/^/@c (_texi2dvi)/
+}
+s/^@ifnotinfo/@c _texi2dvi@ifnotinfo/
+s/^@end ifnotinfo/@c _texi2dvi@end ifnotinfo/'
+
+# Uncomment @iftex blocks by removing any leading `@c texi2dvi' (repeated
+# copies can sneak in via macro invocations).  Likewise, comment out
+# the @top node inside a @ifnottex block.
+uncomment_iftex=\
+'s/^@c _texi2dvi\(@c _texi2dvi\)*//
+/^@c (_texi2dvi)@ifnottex/,/^@c (_texi2dvi)@end ifnottex/{
+  s/^/@c (_texi2dvi)/
+}'
+
+
+# insert_commands - Insert $textra commands at the beginning of the file. 
+# Recommended to be used for @finalout, @smallbook, etc.
+insert_commands ()
+{
+  if test -n "$textra"; then
+    # _xtr.  The file with the user's extra commands.
+    work_xtr=$workdir/xtr
+    in_xtr=$work_xtr/$in_base
+    ensure_dir "$work_xtr"
+    verbose "Inserting extra commands: $textra"
+    case $in_lang in
+      latex)   textra_cmd=1i;;
+      texinfo)
+        textra_cmd='/^\\input texinfo/a'
+        # insert after @setfilename line if present
+        if head -n 10 $in_input | grep '^@setfilename' ; then
+          textra_cmd='/^@setfilename/a'
+        fi
+        ;;
+      *)       error 1 "internal error, unknown language: $in_lang";;
+    esac
+    $SED "$textra_cmd\\
+$textra" "$in_input" >"$in_xtr"
+    in_input=$in_xtr
+  fi
+
+  case $in_lang:$latex2html:`out_lang_tex` in
+    latex:tex4ht:html)
+      # _tex4ht.  The file with the added \usepackage{tex4ht}.
+      work_tex4ht=$workdir/tex4ht
+      in_tex4ht=$work_tex4ht/$in_base
+      ensure_dir "$work_tex4ht"
+      verbose "Inserting \\usepackage{tex4ht}"
+      perl -pe 's<\\documentclass(?:\[.*\])?{.*}>
+                 <$&\\usepackage[xhtml]{tex4ht}>' \
+        "$in_input" >"$in_tex4ht"
+      in_input=$in_tex4ht
+      ;;
+  esac
+}
+
+
+# compute_language FILENAME - Return the short string for the language
+# in which FILENAME is written: `texinfo' or `latex'.
+compute_language ()
+{
+  # If the user explicitly specified the language, use that.
+  # Otherwise, if the first line is \input texinfo, assume it's texinfo.
+  # Otherwise, guess from the file extension.
+  if test -n "$set_language"; then
+    echo $set_language
+  elif $SED 1q "$1" | grep 'input texinfo' >&6; then
+    echo texinfo
+  else
+    # Get the type of the file (latex or texinfo) from the given language
+    # we just guessed, or from the file extension if not set yet.
+    case $1 in
+      *.ltx | *.tex | *.drv | *.dtx) echo latex;;
+      *)                             echo texinfo;;
+    esac
+  fi
+}
+
+
+# run_hevea (MODE) - Convert to HTML/INFO/TEXT.
+#
+# Don't pass `-noiso' to hevea: it's useless in HTML since anyway the
+# charset is set to latin1, and troublesome in other modes since
+# accented characters loose their accents.
+#
+# Don't pass `-o DEST' to hevea because in that case it leaves all its
+# auxiliary files there too...  Too bad, because it means we will need
+# to handle images some day.
+run_hevea ()
+{
+  run_hevea_name="${HEVEA:-hevea}"
+  run_hevea_cmd="$run_hevea_name"
+
+  case $1 in
+    html) ;;
+    text|info) run_hevea_cmd="$run_hevea_cmd -$1";;
+    *) error 1 "run_hevea_cmd: invalid argument: $1";;
+  esac
+
+  # Compiling to the tmp directory enables to preserve a previous
+  # successful compilation.
+  run_hevea_cmd="$run_hevea_cmd -fix -O -o '$out_base'"
+  run_hevea_cmd="$run_hevea_cmd `list_prefix includes -I` -I '$orig_pwd' "
+  run_hevea_cmd="$run_hevea_cmd '$rel$in_input'"
+
+  if $debug; then
+    run_hevea_cmd="$run_hevea_cmd -v -v"
+  fi
+
+  verbose "running $run_hevea_cmd"
+  if eval "$run_hevea_cmd" >&5; then
+    # hevea leaves trailing white spaces, this is annoying.
+    case $1 in text|info)
+      perl -pi -e 's/[ \t]+$//g' "$out_base"*;;
+    esac
+    case $1 in
+    html|text) move_to_dest "$out_base";;
+    info) # There can be foo.info-1, foo.info-2 etc.
+               move_to_dest "$out_base"*;;
+    esac
+  else
+    error 1 "$run_hevea_name exited with bad status, quitting."
+  fi
+}
+
+
+# run_core_conversion - Run TeX (or HeVeA).
+run_core_conversion ()
+{
+  case $in_lang:$latex2html:`out_lang_tex` in
+    *:dvi|*:pdf|latex:tex4ht:html)
+        run_tex;;
+    latex:*:html|latex:*:text|latex:*:info)
+        run_hevea $out_lang;;
+    *)
+        error 1 "invalid input/output combination: $in_lang/$out_lang";;
+  esac
+}
+
+
+# compile - Run the full compilation chain, from pre-processing to
+# installation of the output at its expected location.
+compile ()
+{
+  # Set include path for tools:
+  #   .  Include current directory in case there are files there already, so
+  #     we don't have more TeX runs than necessary.  orig_pwd is used in case 
+  #     we are in clean build mode, where we have cd'd to a temp directory.
+  #   .  Include directory containing file, in case there are other
+  #     files @include'd.
+  #   .  Keep a final path_sep to get the default (system) TeX
+  #     directories included.
+  #   .  If we have any includes, put those at the end.
+
+  common="$orig_pwd$path_sep$in_dir$path_sep"
+  #
+  txincludes=`list_infix includes $path_sep`
+  test -n "$txincludes" && common="$common$txincludes$path_sep"
+  #
+  for var in $tex_envvars; do
+    eval val="\$common\$${var}_orig"
+    # Convert relative paths to absolute paths, so we can run in another
+    # directory (e.g., in clean build mode, or during the macro-support
+    # detection).
+    val=`absolute_filenames "$val"`
+    eval $var="\"$val\""
+    export $var
+    eval verbose \"$var=\'\$${var}\'\"
+  done
+
+  # --expand
+  run_makeinfo
+
+  # --command, --texinfo
+  insert_commands
+
+  # Run until a fixed point is reached.
+  run_tex_suite
+}
+
+# make_openout_test FLAGS EXTENSION
+# - Run TeX with an input file that performs an \openout.  Pass FLAGS to TeX.
+#
+make_openout_test ()
+{
+    recorder_option_maybe="$1"
+    make_tex_cmd
+
+    ensure_dir "$workdir"/check_recorder
+    cd_dir "$workdir"/check_recorder
+
+    cat > openout.tex <<EOF
+\newwrite\ourwrite
+\immediate\openout\ourwrite dum.dum
+\bye
+EOF
+    # \bye doesn't work for LaTeX, but it will cause latex
+    # to exit with an input error.
+    tex_cmd="$tex_cmd '${escape}input' ./openout.tex"
+    # ./ in case . isn't in path
+    verbose "$0: running $tex_cmd ..."
+    rm -fr "openout.$2"
+    (eval "$tex_cmd" >/dev/null 2>&1)
+}
+
+# Check tex supports -recorder option
+check_recorder_support ()
+{
+  verbose "Checking TeX recorder support..."
+  make_openout_test " -recorder" fls
+  if test -f openout.fls && grep '^OUTPUT dum.dum$' openout.fls > /dev/null
+  then
+    cd_orig
+    verbose "Checking TeX recorder support... yes"
+    return 0
+  else
+    cd_orig
+    verbose "Checking TeX recorder support... no"
+    return 1
+  fi
+}
+
+# Check tex supports \openout traces in log
+check_openout_in_log_support ()
+{
+  verbose "Checking TeX \openout in log support..."
+  make_openout_test "" log
+  if test -f openout.log \
+     && grep '^\\openout..\? *= *`\?dum\.dum'\''\?' openout.log >/dev/null
+  then
+    cd_orig
+    verbose "Checking TeX \openout in log support... yes"
+    return 0
+  else
+    cd_orig
+    verbose "Checking TeX \openout in log support... no"
+    return 1
+  fi
+}
+
+# Set that output auxiliary files are detected with the -recorder option,
+# which creates a file JOBNAME.fls which is a machine-readable listing of
+# files read and written during the job.
+set_aux_files_from_fls ()
+{
+  recorder_option_maybe=" -recorder"
+  generated_files_get_method=generated_files_get_from_fls
+}
+
+# Set that output auxiliary files are detected with searching for \openout
+# in the log file.
+set_aux_files_from_log ()
+{
+  recorder_option_maybe=''
+  generated_files_get_method=generated_files_get_from_log
+}
+
+# Decide whether output auxiliary files are detected with the -recorder
+# option, or by searching for \openout in the log file.
+decide_aux_files_method ()
+{
+  # Select output file detection method
+  # Valid values of TEXI2DVI_USE_RECORDER are:
+  #   yes           use the -recorder option, no checks.
+  #   no            scan for \openout in the log file, no checks.
+  #   yesmaybe      check whether -recorder option is supported, and if yes
+  #                use it, otherwise check for tracing \openout in the
+  #                log file is supported, and if yes use it, else it is an 
+  #                error.
+  #   nomaybe      same as `yesmaybe', except that the \openout trace in
+  #                log file is checked first.
+  #
+  #  The default behaviour is `nomaybe'.
+
+  test -n "$TEXI2DVI_USE_RECORDER" || TEXI2DVI_USE_RECORDER=nomaybe
+
+  case $TEXI2DVI_USE_RECORDER in
+    yes) set_aux_files_from_fls;;
+
+    no)	set_aux_files_from_log;;
+
+    yesmaybe)
+      if check_recorder_support; then
+        set_aux_files_from_fls
+      elif check_openout_in_log_support; then
+        set_aux_files_from_log
+      else
+        error 1 "TeX neither supports -recorder nor outputs \\openout lines in its log file"
+      fi
+      ;;
+
+    nomaybe)
+      if check_openout_in_log_support; then
+        set_aux_files_from_log
+      elif check_recorder_support; then
+        set_aux_files_from_fls
+      else
+        error 1 "TeX neither supports -recorder nor outputs \\openout lines in its log file"
+      fi
+      ;;
+    
+    *) error 1 "Invalid value of TEXI2DVI_USE_RECORDER environment variable : $TEXI2DVI_USE_RECORDER.";;
+
+  esac
+}
+
+# remove FILE...
+remove ()
+{
+  verbose "Removing" "$@"
+  rm -rf "$@"
+}
+
+
+# all_files - Echo the names of all files generated, including those by
+#             auxiliary tools like texindex.
+all_files ()
+{
+  echo $in_noext.log
+  echo $in_noext.fls
+  echo $xref_files_new
+  echo `sorted_index_files`
+}
+
+sorted_index_files ()
+{
+  filter_files sorted_index_filter
+}
+
+# Print the name of a generated file based on FILE if there is one.
+sorted_index_filter ()
+{
+  case $in_lang in
+    texinfo)
+      # texindex: texinfo.cp -> texinfo.cps
+      if test -n "`index_file_p $1`" ; then
+        echo $1s
+      fi
+      ;;
+  esac
+}
+
+
+# Not currently used - use with filter_files to add secondary files created by 
+# bibtex
+bibtex_secondary_files ()
+{
+  case $in_lang in
+    latex)
+      if test -n "`aux_file_p $1`"; then
+        # bibtex: *.aux -> *.bbl and *.blg.
+        echo $1 | $SED 's/^\(.*\)\.aux$/\1.bbl/'
+        echo $1 | $SED 's/^\(.*\)\.aux$/\1.blg/'
+      fi
+      ;;
+  esac
+}
+
+# mostly_clean - Remove auxiliary files and directories.  Changes back to
+# the original directory.
+mostly_clean ()
+{
+  cd_orig
+  set X "$t2ddir"
+  shift
+  $tidy || {
+    set X ${1+"$@"} `all_files`
+    shift
+  }
+  remove ${1+"$@"}
+}
+
+
+# cleanup - Remove what should be removed according to options.
+# Called at the end of each compilation cycle, and at the end of
+# the script.  Changes the current directory.
+cleanup ()
+{
+  case $clean:$tidy in
+    true:true) mostly_clean ;;                # build mode is "clean"
+    false:false) cd_orig; remove "$t2ddir";;  # build mode is "local"
+  esac
+}
+
+
+#  input_file_name_decode - Decode COMMAND_LINE_FILENAME, and set the
+# following shell variables:
+#
+# - COMMAND_LINE_FILENAME
+#   The filename given on the commmand line, but cleaned of TeX commands.
+# - IN_DIR
+#   The directory containing the input file.
+# - IN_BASE
+#   The input file base name (no directory part).
+# - IN_NOEXT
+#   The input file name with neither file extensions nor directory part.
+# - IN_INPUT
+#   The path to the input file for passing as a command-line argument
+#   to TeX.  Defaults to COMMAND_LINE_FILENAME, but might change if the
+#   input is preprocessed.
+input_file_name_decode ()
+{
+  case $command_line_filename in
+    *\\input{*}*)
+      # Let AUC-TeX error parser deal with line numbers.
+      line_error=false
+      command_line_filename=`\
+        expr X"$command_line_filename" : X'.*input{\([^}]*\)}'`
+      ;;
+  esac
+
+  # If the COMMAND_LINE_FILENAME is not absolute (e.g., --debug.tex),
+  # prepend `./' in order to avoid that the tools take it as an option.
+  echo "$command_line_filename" | LC_ALL=C $EGREP '^(/|[A-Za-z]:/)' >&6 \
+  || command_line_filename="./$command_line_filename"
+
+  # See if the file exists.  If it doesn't we're in trouble since, even
+  # though the user may be able to reenter a valid filename at the tex
+  # prompt (assuming they're attending the terminal), this script won't
+  # be able to find the right xref files and so forth.
+  test -r "$command_line_filename" \
+  || error 1 "cannot read $command_line_filename, skipping."
+
+  # Get the name of the current directory.
+  in_dir=`func_dirname "$command_line_filename"`
+
+  # Strip directory part but leave extension.
+  in_base=`basename "$command_line_filename"`
+  # Strip extension.
+  in_noext=`noext "$in_base"`
+
+  # The normalized file name to compile.  Must always point to the
+  # file to actually compile (in case of recoding, macro-expansion etc.).
+  in_input=$in_dir/$in_base
+
+
+  # Compute the output file name.
+  if test x"$oname" != x; then
+    out_name=$oname
+  else
+    out_name=$in_noext.`out_lang_ext`
+  fi
+  out_dir=`func_dirname "$out_name"`
+  out_dir_abs=`absolute "$out_dir"`
+  out_base=`basename "$out_name"`
+  out_noext=`noext "$out_base"`
+}
+
+
+# 
+#################### Main program starts ##########################
+
+# Initialize more variables.
+#
+# Save TEXINPUTS so we can construct a new TEXINPUTS path for each file.
+# Likewise for bibtex and makeindex.
+tex_envvars="BIBINPUTS BSTINPUTS DVIPSHEADERS INDEXSTYLE MFINPUTS MPINPUTS \
+TEXINPUTS TFMFONTS"
+for var in $tex_envvars; do
+  eval ${var}_orig=\$$var
+  export $var
+done
+
+# Push a token among the arguments that will be used to notice when we
+# ended options/arguments parsing.
+# Use "set dummy ...; shift" rather than 'set - ..." because on
+# Solaris set - turns off set -x (but keeps set -e).
+# Use ${1+"$@"} rather than "$@" because Digital Unix and Ultrix 4.3
+# still expand "$@" to a single argument (the empty string) rather
+# than nothing at all.
+arg_sep="$$--$$"
+set dummy ${1+"$@"} "$arg_sep"; shift
+
+while test x"$1" != x"$arg_sep"; do
+  # Handle --option=value by splitting apart and putting back on argv.
+  case "$1" in
+    --*=*)
+      opt=`echo "$1" | $SED -e 's/=.*//'`
+      val=`echo "$1" | $SED -e 's/[^=]*=//'`
+      shift
+      set dummy "$opt" "$val" ${1+"$@"}; shift
+      ;;
+  esac
+
+  case "$1" in
+    -@ ) escape=@;;
+    -~ ) verbose "Option -~ is obsolete: texi2dvi ignores it.";;
+    -b | --batch) ;; # Obsolete
+         --build)      shift; build_mode=$1;;
+         --build-dir)  shift; build_dir=$1; build_mode=tidy;;
+    -c | --clean) build_mode=clean;;
+    -D | --debug) debug=true;;
+    -e | -E | --expand) expand=true;;
+    -h | --help) usage;;
+    -I)   shift; list_concat_dirs includes "$1";;
+    -l | --lang | --language) shift; set_language=$1;;
+    --mostly-clean) action=mostly-clean;;
+    --no-line-error) line_error=false;;
+    --max-iterations) shift; max_iters=$1;;
+    -o | --out  | --output)
+      shift
+      # Make it absolute, just in case we also have --clean, or whatever.
+      oname=`absolute "$1"`;;
+
+    # Output formats.
+    -O|--output-format) shift; out_lang_set "$1";;
+       --dvi|--dvipdf|--html|--info|--pdf|--ps|--text)
+       out_lang_set `echo "x$1" | $SED 's/^x--//'`;;
+
+    -p) out_lang_set pdf;;
+    -q | -s | --quiet | --silent) quiet=true;;
+    --src-specials) src_specials=--src-specials;;
+    --shell-escape) shell_escape=--shell-escape;;  
+    --tex4ht) latex2html=tex4ht;;
+    -t | --texinfo | --command ) shift; textra="$textra\\
+"`echo "$1" | $SED 's/\\\\/\\\\\\\\/g'`;;
+    --translate-file ) shift; translate_file="$1";;
+    --tidy) build_mode=tidy;;
+    -v | --vers*) version;;
+    -V | --verb*) verb=true;;
+    --) # What remains are not options.
+      shift
+      while test x"$1" != x"$arg_sep"; do
+        set dummy ${1+"$@"} "$1"; shift
+        shift
+      done
+      break;;
+    -*)
+      error 1 "Unknown or ambiguous option \`$1'." \
+              "Try \`--help' for more information."
+      ;;
+    *) set dummy ${1+"$@"} "$1"; shift;;
+   esac
+   shift
+done
+# Pop the token
+shift
+
+# $tidy:  compile in a t2d directory.
+# $clean: remove all the aux files.
+case $build_mode in
+  local) clean=false; tidy=false;;
+  tidy)  clean=false; tidy=true;;
+  clean) clean=true;  tidy=true;;
+      *) error 1 "invalid build mode: $build_mode";;
+esac
+
+# Interpret remaining command line args as filenames.
+case $# in
+ 0)
+  error 2 "Missing file arguments." "Try \`--help' for more information."
+  ;;
+ 1) ;;
+ *)
+  if test -n "$oname"; then
+    error 2 "Can't use option \`--output' with more than one argument."
+  fi
+  ;;
+esac
+
+
+# We can't do much without tex.
+# End up with the TEX and PDFTEX variables set to what we are going to use.
+#
+# If $TEX is set to a directory, don't use it.
+test -n "$TEX" && test -d "$TEX" && unset TEX
+
+# But otherwise, use $TEX if it is set.
+if test -z "$TEX"; then
+  if findprog tex; then :; else cat <<EOM >&2
+You don't have a working TeX binary (tex) installed anywhere in
+your PATH, and texi2dvi cannot proceed without one.  If you want to use
+this script, you'll need to install TeX (if you don't have it) or change
+your PATH or TEX environment variable (if you do).  See the --help
+output for more details.
+
+For information about obtaining TeX, please see http://tug.org/texlive,
+or do a web search for TeX and your operating system or distro.
+EOM
+    exit 1
+  fi
+
+  # We want to use etex (or pdftex) if they are available, and the user
+  # didn't explicitly specify.  We don't check for elatex and pdfelatex
+  # because (as of 2003), the LaTeX team has asked that new distributions
+  # use etex by default anyway.
+  #
+  if findprog etex; then TEX=etex; else TEX=tex; fi
+fi
+
+# For many years, the pdftex binary has included the e-tex extensions,
+# but for those people with ancient TeX distributions ...
+if test -z "$PDFTEX"; then
+  if findprog pdfetex; then PDFTEX=pdfetex; else PDFTEX=pdftex; fi
+fi
+
+
+# File descriptor usage:
+# 0 standard input
+# 1 standard output (--verbose messages)
+# 2 standard error
+# 5 tools output (turned off by --quiet)
+# 6 tracing/debugging (set -x output, etc.)
+
+# Main tools' output (TeX, etc.) that TeX users are used to seeing.
+#
+# If quiet, discard, else redirect to the message flow.
+if $quiet; then
+  exec 5>/dev/null
+else
+  exec 5>&1
+fi
+
+
+# Enable tracing, and auxiliary tools output.
+# 
+# This fd should be used where you'd typically use /dev/null to throw
+# output away.  But sometimes it is convenient to see that output (e.g.,
+# from a grep) to aid debugging.  Especially debugging at distance, via
+# the user.
+# 
+if $debug; then
+  exec 6>&1
+  set -vx
+else
+  exec 6>/dev/null
+fi
+
+
+#  Main program main loop - TeXify each file in turn.
+for command_line_filename
+do
+  verbose "Processing $command_line_filename ..."
+
+  input_file_name_decode
+
+  # `texinfo' or `latex'?
+  in_lang=`compute_language "$command_line_filename"`
+
+  # An auxiliary directory used for all the auxiliary tasks involved
+  # in compiling this document.
+  case $build_dir in
+      '' | . ) t2ddir=$out_noext.t2d ;;
+      *) # Avoid collisions between multiple occurrences of the same
+         # file, so depend on the output path.  Remove leading `./',
+         # at least to avoid creating a file starting with `.!', i.e.,
+         # an invisible file. The sed expression is fragile if the cwd
+         # has active characters.  Transform / into ! so that we don't
+         # need `mkdir -p'.  It might be something to reconsider.
+         t2ddir=$build_dir/`echo "$out_dir_abs/$out_noext.t2d" |
+             $SED "s,^$orig_pwd/,,;s,^\./,,;s,/,!,g"`
+  esac
+  # Remove it at exit if clean mode.
+  trap "cleanup" 0 1 2 15
+
+  ensure_dir "$build_dir" "$t2ddir"
+
+  # Sometimes there are incompatibilities between auxiliary files for
+  # DVI and PDF.  The contents can also change whether we work on PDF
+  # and/or DVI.  So keep separate spaces for each.
+  workdir=$t2ddir/`out_lang_tex`
+  ensure_dir "$workdir"
+
+  # _build.  In a tidy build, where the auxiliary files are output.
+  if $tidy; then
+    work_build=$workdir/build
+  else
+    work_build=.
+  fi
+
+  # _bak.  Copies of the previous auxiliary files (another round is
+  # run if they differ from the new ones).
+  work_bak=$workdir/bak
+
+  # Make those directories.
+  ensure_dir "$work_build" "$work_bak"
+
+  # Decide how to find auxiliary files created by TeX.
+  decide_aux_files_method
+  
+  case $action in
+    compile)
+      # Compile the document.
+      compile
+      cleanup
+      ;;
+
+    mostly-clean)
+      xref_files_new=`generated_files_get`
+      mostly_clean
+      ;;
+  esac
+done
+
+verbose "done."
+exit 0 # exit successfully, not however we ended the loop.
+# Local Variables:
+# sh-basic-offset: 2
+# sh-indentation: 2
+# End:
diff --git a/support/texi2html b/support/texi2html
new file mode 100755
index 0000000..13b5588
--- /dev/null
+++ b/support/texi2html
@@ -0,0 +1,5428 @@
+#! /usr/bin/perl
+'di ';
+'ig 00 ';
+#+##############################################################################
+#
+# texi2html: Program to transform Texinfo documents to HTML
+#
+#    Copyright (C) 1999, 2000  Free Software Foundation, Inc.
+#
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+#-##############################################################################
+
+# This requires perl version 5 or higher
+require 5.0;
+
+#++##############################################################################
+#
+# NOTE FOR DEBUGGING THIS SCRIPT:
+# You can run 'perl texi2html.pl' directly, provided you have
+# the environment variable T2H_HOME set to the directory containing
+# the texi2html.init file
+#
+#--##############################################################################
+
+# CVS version:
+# $Id: texi2html.pl,v 1.55 2000/07/27 14:39:41 obachman Exp $
+
+# Homepage:
+$T2H_HOMEPAGE = <<EOT;
+http://www.mathematik.uni-kl.de/~obachman/Texi2html
+EOT
+
+# Authors:  
+$T2H_AUTHORS = <<EOT;
+Written by: Lionel Cons <Lionel.Cons\@cern.ch> (original author)
+            Karl Berry  <karl\@freefriends.org>
+            Olaf Bachmann <obachman\@mathematik.uni-kl.de>
+            and many others.
+Maintained by: Olaf Bachmann <obachman\@mathematik.uni-kl.de>
+Send bugs and suggestions to <texi2html\@mathematik.uni-kl.de>
+EOT
+
+# Version: set in configure.in
+$THISVERSION = '1.64';
+$THISPROG = "texi2html $THISVERSION";	# program name and version
+  
+# The man page for this program is included at the end of this file and can be
+# viewed using the command 'nroff -man texi2html'.
+
+# Identity:
+
+$T2H_TODAY = &pretty_date;		# like "20 September 1993"
+# the eval prevents this from breaking on system which do not have
+# a proper getpwuid implemented
+eval { ($T2H_USER = (getpwuid ($<))[6]) =~ s/,.*//;}; # Who am i
+
+#+++############################################################################
+#                                                                              #
+# Initialization                                                               #
+# Pasted content of File $(srcdir)/texi2html.init: Default initializations     # 
+#                                                                              #
+#---############################################################################
+
+# leave this within comments, and keep the require statement
+# This way, you can directly run texi2html.pl, if $ENV{T2H_HOME}/texi2html.init
+# exists.
+
+# 
+# -*-perl-*-
+######################################################################
+# File: texi2html.init
+#
+# Sets default values for command-line arguments and for various customizable
+# procedures
+#
+# A copy of this file is pasted into the beginning of texi2html by
+# 'make texi2html'
+#
+# Copy this file and make changes to it, if you like.
+# Afterwards, either, load it with command-line option -init_file <your_init_file>
+#
+# $Id: texi2html.init,v 1.34 2000/07/27 14:09:02 obachman Exp $
+
+######################################################################
+# stuff which can also be set by command-line options
+#
+#
+# Note: values set here, overwrite values set by the command-line
+# options before -init_file and might still be overwritten by
+# command-line arguments following the -init_file option
+#
+
+# T2H_OPTIONS is a hash whose keys are the (long) names of valid
+# command-line options and whose values are a hash with the following keys:
+# type    ==> one of !|=i|:i|=s|:s (see GetOpt::Long for more info)
+# linkage ==> ref to scalar, array, or subroutine (see GetOpt::Long for more info)
+# verbose ==> short description of option (displayed by -h)
+# noHelp  ==> if 1 -> for "not so important options": only print description on -h 1
+#                2 -> for obsolete options: only print description on -h 2
+
+$T2H_DEBUG = 0;
+$T2H_OPTIONS -> {debug} =
+{
+ type => '=i',
+ linkage => \$main::T2H_DEBUG,
+ verbose => 'output HTML with debuging information',
+};
+
+$T2H_DOCTYPE = '<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">'; 
+$T2H_OPTIONS -> {doctype} = 
+{
+ type => '=s',
+ linkage => \$main::T2H_DOCTYPE,
+ verbose => 'document type which is output in header of HTML files',
+ noHelp => 1
+};
+
+$T2H_CHECK = 0;
+$T2H_OPTIONS -> {check} =
+{
+ type => '!',
+ linkage => \$main::T2H_CHECK,
+ verbose => 'if set, only check files and output all things that may be Texinfo commands',
+ noHelp => 1
+};
+
+# -expand
+# if set to "tex" (or, "info") expand @iftex and @tex (or, @ifinfo) sections
+# else, neither expand @iftex, @tex, nor @ifinfo sections
+$T2H_EXPAND = "info";
+$T2H_OPTIONS -> {expand} = 
+{
+ type => '=s',
+ linkage => \$T2H_EXPAND,
+ verbose => 'Expand info|tex|none section of texinfo source',
+};
+
+# - glossary
+#if set, uses section named `Footnotes' for glossary
+$T2H_USE_GLOSSARY = 0;
+T2H_OPTIONS -> {glossary} =
+{
+ type => '!',
+ linkage => \$T2H_USE_GLOSSARY,
+ verbose => "if set, uses section named `Footnotes' for glossary",
+ noHelp  => 1,
+};
+
+
+# -invisible
+# $T2H_INVISIBLE_MARK is the text used to create invisible destination
+# anchors for index links (you can for instance use the invisible.xbm
+# file shipped with this program). This is a workaround for a known
+# bug of many WWW browsers, including netscape.
+# For me, it works fine without it -- on the contrary: if there, it
+# inserts space between headers and start of text (obachman 3/99)
+$T2H_INVISIBLE_MARK = '';
+# $T2H_INVISIBLE_MARK = '&#160;';
+$T2H_OPTIONS -> {invisible} =
+{
+ type => '=s',
+ linkage => \$T2H_INVISIBLE_MARK,
+ verbose => 'use text in invisble anchot',
+ noHelp  => 1,
+};
+
+# -iso
+# if set, ISO8879 characters are used for special symbols (like copyright, etc)
+$T2H_USE_ISO = 0;
+$T2H_OPTIONS -> {iso} =
+{
+ type => 'iso',
+ linkage => \$T2H_USE_ISO,
+ verbose => 'if set, ISO8879 characters are used for special symbols (like copyright, etc)',
+ noHelp => 1,
+};
+
+# -I
+# list directories where @include files are searched for (besides the
+# directory of the doc file) additional '-I' args add to this list
+@T2H_INCLUDE_DIRS = (".");
+$T2H_OPTIONS -> {I} =
+{
+ type => '=s',
+ linkage => \@T2H_INCLUDE_DIRS,
+ verbose => 'append $s to the @include search path',
+};
+
+# -top_file
+# uses file of this name for top-level file
+# extension is manipulated appropriately, if necessary.
+# If empty, <basename of document>.html is used
+# Typically, you would set this to "index.html".
+$T2H_TOP_FILE = '';
+$T2H_OPTIONS -> {top_file} =
+{
+ type => '=s',
+ linkage => \$T2H_TOP_FILE,
+ verbose => 'use $s as top file, instead of <docname>.html',
+};
+
+
+# -toc_file
+# uses file of this name for table of contents file
+# extension is manipulated appropriately, if necessary.
+# If empty, <basename of document>_toc.html is used
+$T2H_TOC_FILE = '';
+$T2H_OPTIONS -> {toc_file} =
+{
+ type => '=s',
+ linkage => \$T2H_TOC_FILE,
+ verbose => 'use $s as ToC file, instead of <docname>_toc.html',
+};
+
+# -frames
+# if set, output two additional files which use HTML 4.0 "frames".
+$T2H_FRAMES = 0;
+$T2H_OPTIONS -> {frames} =
+{
+ type => '!',
+ linkage => \$T2H_FRAMES,
+ verbose => 'output files which use HTML 4.0 frames (experimental)',
+ noHelp => 1,
+};
+
+
+# -menu | -nomenu
+# if set, show the Texinfo menus
+$T2H_SHOW_MENU = 1;
+$T2H_OPTIONS -> {menu} =
+{
+ type => '!',
+ linkage => \$T2H_SHOW_MENU,
+ verbose => 'ouput Texinfo menus',
+};
+
+# -number | -nonumber
+# if set, number sections and show section names and numbers in references 
+# and menus
+$T2H_NUMBER_SECTIONS = 1;
+$T2H_OPTIONS -> {number} =
+{
+ type => '!',
+ linkage => \$T2H_NUMBER_SECTIONS,
+ verbose => 'use numbered sections'
+};
+
+# if set, and T2H_NUMBER_SECTIONS is set, then use node names in menu
+# entries, instead of section names
+$T2H_NODE_NAME_IN_MENU = 0;
+
+# if set and menu entry equals menu descr, then do not print menu descr.
+# Likewise, if node name equals entry name, do not print entry name.
+$T2H_AVOID_MENU_REDUNDANCY = 1;
+
+# -split section|chapter|none 
+# if set to 'section' (resp. 'chapter') create one html file per (sub)section
+# (resp. chapter) and separate pages for Top, ToC, Overview, Index,
+# Glossary, About.
+# otherwise, create monolithic html file which contains whole document
+#$T2H_SPLIT = 'section';
+$T2H_SPLIT = '';
+$T2H_OPTIONS -> {split} =
+{
+ type => '=s',
+ linkage => \$T2H_SPLIT,
+ verbose => 'split document on section|chapter else no splitting',
+};
+
+# -section_navigation|-no-section_navigation
+# if set, then navigation panels are printed at the beginning of each section
+# and, possibly at the end (depending on whether or not there were more than 
+# $T2H_WORDS_IN_PAGE  words on page
+# This is most useful if you do not want to have section navigation 
+# on -split chapter
+$T2H_SECTION_NAVIGATION = 1;
+$T2H_OPTIONS -> {sec_nav} =
+{
+ type => '!',
+ linkage => \$T2H_SECTION_NAVIGATION,
+ verbose => 'output navigation panels for each section',
+};
+
+# -subdir
+# if set put result files in this directory
+# if not set result files are put into current directory
+#$T2H_SUBDIR = 'html';
+$T2H_SUBDIR = '';
+$T2H_OPTIONS -> {subdir} =
+{
+ type => '=s',
+ linkage => \$T2H_SUBDIR,
+ verbose => 'put HTML files in directory $s, instead of $cwd',
+};
+
+# -short_extn
+# If this is set all HTML file will have extension ".htm" instead of
+# ".html". This is helpful when shipping the document to PC systems.
+$T2H_SHORTEXTN = 0;
+$T2H_OPTIONS -> {short_ext} =
+{
+ type => '!',
+ linkage => \$T2H_SHORTEXTN,
+ verbose => 'use "htm" extension for output HTML files',
+};
+
+
+# -prefix
+# Set the output file prefix, prepended to all .html, .gif and .pl files.
+# By default, this is the basename of the document
+$T2H_PREFIX = '';
+$T2H_OPTIONS -> {prefix} =
+{
+ type => '=s',
+ linkage => \$T2H_PREFIX,
+ verbose => 'use as prefix for output files, instead of <docname>',
+};
+
+# -o filename
+# If set, generate monolithic document output html into $filename
+$T2H_OUT = '';
+$T2H_OPTIONS -> {out_file} =
+{
+ type => '=s',
+ linkage => sub {$main::T2H_OUT = @_[1]; $T2H_SPLIT = '';},
+ verbose => 'if set, all HTML output goes into file $s',
+};
+
+# -short_ref
+#if set cross-references are given without section numbers
+$T2H_SHORT_REF = '';
+$T2H_OPTIONS -> {short_ref} =
+{
+ type => '!',
+ linkage => \$T2H_SHORT_REF,
+ verbose => 'if set, references are without section numbers',
+};
+
+# -idx_sum
+# if value is set, then for each @prinindex $what
+# $docu_name_$what.idx is created which contains lines of the form
+# $key\t$ref sorted alphabetically (case matters)
+$T2H_IDX_SUMMARY = 0;
+$T2H_OPTIONS -> {idx_sum} =
+{
+ type => '!',
+ linkage => \$T2H_IDX_SUMMARY,
+ verbose => 'if set, also output index summary',
+ noHelp  => 1,
+};
+
+# -verbose
+# if set, chatter about what we are doing
+$T2H_VERBOSE = '';
+$T2H_OPTIONS -> {Verbose} =
+{
+ type => '!',
+ linkage => \$T2H_VERBOSE,
+ verbose => 'print progress info to stdout',
+};
+
+# -lang
+# For page titles use $T2H_WORDS->{$T2H_LANG}->{...} as title.
+# To add a new language, supply list of titles (see $T2H_WORDS below).
+# and use ISO 639 language codes (see e.g. perl module Locale-Codes-1.02 
+# for  definitions)
+# Default's to 'en' if not set or no @documentlanguage is specified
+$T2H_LANG = '';
+$T2H_OPTIONS -> {lang} =
+{
+ type => '=s',
+ linkage => sub {SetDocumentLanguage($_[1])},
+ verbose => 'use $s as document language (ISO 639 encoding)',
+};
+
+# -l2h
+# if set, uses latex2html for generation of math content 
+$T2H_L2H = '';
+$T2H_OPTIONS -> {l2h} =
+{
+ type => '!',
+ linkage => \$T2H_L2H,
+ verbose => 'if set, uses latex2html for @math and @tex',
+};
+
+######################
+# The following options are only relevant if $T2H_L2H is set
+#
+# -l2h_l2h
+# name/location of latex2html progam
+$T2H_L2H_L2H = "latex2html";
+$T2H_OPTIONS -> {l2h_l2h} =
+{
+ type => '=s',
+ linkage => \$T2H_L2H_L2H,
+ verbose => 'program to use for latex2html translation',
+ noHelp => 1,
+};
+
+# -l2h_skip
+# if set, skips actual call to latex2html tries to reuse previously generated 
+# content, instead
+$T2H_L2H_SKIP = '';
+$T2H_OPTIONS -> {l2h_skip} =
+{
+ type => '!',
+ linkage => \$T2H_L2H_SKIP,
+ verbose => 'if set, tries to reuse previously latex2html output',
+ noHelp => 1,
+};
+
+# -l2h_tmp
+# if set, l2h uses this directory for temporarary files. The path
+# leading to this directory may not contain a dot (i.e., a "."),
+# otherwise, l2h will fail
+$T2H_L2H_TMP = '';
+$T2H_OPTIONS -> {l2h_tmp} =
+{
+ type => '=s',
+ linkage => \$T2H_L2H_TMP,
+ verbose => 'if set, uses $s as temporary latex2html directory',
+ noHelp => 1,
+};
+
+# if set, cleans intermediate files (they all have the prefix $doc_l2h_) 
+# of l2h 
+$T2H_L2H_CLEAN = 1;
+$T2H_OPTIONS -> {l2h_clean} =
+{
+ type => '!',
+ linkage => \$T2H_L2H_CLEAN,
+ verbose => 'if set, do not keep intermediate latex2html files for later reuse',
+ noHelp => 1,
+};
+
+$T2H_OPTIONS -> {D} =
+{
+ type => '=s',
+ linkage => sub {$main::value{@_[1]} = 1;},
+ verbose => 'equivalent to Texinfo "@set $s 1"',
+ noHelp => 1,
+};
+
+$T2H_OPTIONS -> {init_file} =
+{
+ type => '=s',
+ linkage => \&LoadInitFile,
+ verbose => 'load init file $s'
+};
+
+
+##############################################################################
+#
+# The following can only be set in the init file
+#
+##############################################################################
+
+# if set, center @image by default
+# otherwise, do not center by default
+$T2H_CENTER_IMAGE = 1;
+
+# used as identation for block enclosing command @example, etc
+# If not empty, must be enclosed in <td></td>
+$T2H_EXAMPLE_INDENT_CELL = '<td>&nbsp;</td>';
+# same as above, only for @small
+$T2H_SMALL_EXAMPLE_INDENT_CELL = '<td>&nbsp;</td>';
+# font size for @small
+$T2H_SMALL_FONT_SIZE = '-1';
+
+# if non-empty, and no @..heading appeared in Top node, then
+# use this as header for top node/section, otherwise use value of 
+# @settitle or @shorttitle (in that order)
+$T2H_TOP_HEADING = '';
+
+# if set, use this chapter for 'Index' button, else
+# use first chapter whose name matches 'index' (case insensitive)
+$T2H_INDEX_CHAPTER = '';
+
+# if set and $T2H_SPLIT is set, then split index pages at the next letter
+# after they have more than that many entries
+$T2H_SPLIT_INDEX = 100;
+
+# if set (e.g., to index.html) replace hrefs to this file 
+# (i.e., to index.html) by ./
+$T2H_HREF_DIR_INSTEAD_FILE = '';
+
+########################################################################
+# Language dependencies: 
+# To add a new language extend T2H_WORDS hash and create $T2H_<...>_WORDS hash
+# To redefine one word, simply do:
+# $T2H_WORDS->{<language>}->{<word>} = 'whatever' in your personal init file.
+#
+$T2H_WORDS_EN =
+{
+ # titles  of pages
+ 'ToC_Title' => 'Table of Contents',
+ 'Overview_Title' => 'Short Table of Contents',
+ 'Index_Title' => 'Index',
+ 'About_Title' => 'About this document',
+ 'Footnotes_Title' => 'Footnotes',
+ 'See' => 'See',
+ 'see' => 'see',
+ 'section' => 'section',
+# If necessary, we could extend this as follows: 
+#  # text for buttons
+#  'Top_Button' => 'Top',
+#  'ToC_Button' => 'Contents',
+#  'Overview_Button' => 'Overview',
+#  'Index_button' => 'Index',
+#  'Back_Button' => 'Back',
+#  'FastBack_Button' => 'FastBack',
+#  'Prev_Button' => 'Prev',
+#  'Up_Button' => 'Up',
+#  'Next_Button' => 'Next',
+#  'Forward_Button' =>'Forward',
+#  'FastWorward_Button' => 'FastForward',
+#  'First_Button' => 'First',
+#  'Last_Button' => 'Last',
+#  'About_Button' => 'About'
+};
+
+$T2H_WORD_DE =
+{
+ 'ToC_Title' => 'Inhaltsverzeichniss',
+ 'Overview_Title' => 'Kurzes Inhaltsverzeichniss',
+ 'Index_Title' => 'Index',
+ 'About_Title' => '&Uuml;ber dieses Dokument',
+ 'Footnotes_Title' => 'Fu&szlig;noten',
+ 'See' => 'Siehe',
+ 'see' => 'siehe',
+ 'section' => 'Abschnitt',
+};
+
+$T2H_WORD_NL =
+{
+ 'ToC_Title' => 'Inhoudsopgave',
+ 'Overview_Title' => 'Korte inhoudsopgave',
+ 'Index_Title' => 'Index', #Not sure ;-)
+ 'About_Title' => 'No translation available!', #No translation available!
+ 'Footnotes_Title' => 'No translation available!', #No translation available!
+ 'See' => 'Zie',
+ 'see' => 'zie',
+ 'section' => 'sectie',
+};
+
+$T2H_WORD_ES =
+{
+ 'ToC_Title' => '&iacute;ndice General',
+ 'Overview_Title' => 'Resumen del Contenido',
+ 'Index_Title' => 'Index', #Not sure ;-)
+ 'About_Title' => 'No translation available!', #No translation available!
+ 'Footnotes_Title' => 'Fu&szlig;noten',
+ 'See' => 'V&eacute;ase',
+ 'see' => 'v&eacute;ase',
+ 'section' => 'secci&oacute;n',
+};
+
+$T2H_WORD_NO =
+{
+ 'ToC_Title' => 'Innholdsfortegnelse',
+ 'Overview_Title' => 'Kort innholdsfortegnelse',
+ 'Index_Title' => 'Indeks', #Not sure ;-)
+ 'About_Title' => 'No translation available!', #No translation available!
+ 'Footnotes_Title' => 'No translation available!',
+ 'See' => 'Se',
+ 'see' => 'se',
+ 'section' => 'avsnitt',
+};
+
+$T2H_WORD_PT =
+{
+ 'ToC_Title' => 'Sum&aacute;rio',
+ 'Overview_Title' => 'Breve Sum&aacute;rio',
+ 'Index_Title' => '&Iacute;ndice', #Not sure ;-)
+ 'About_Title' => 'No translation available!', #No translation available!
+ 'Footnotes_Title' => 'No translation available!',
+ 'See' => 'Veja',
+ 'see' => 'veja',
+ 'section' => 'Se&ccedil;&atilde;o',
+};
+
+$T2H_WORDS =
+{
+ 'en' => $T2H_WORDS_EN,
+ 'de' => $T2H_WORDS_DE,
+ 'nl' => $T2H_WORDS_NL,
+ 'es' => $T2H_WORDS_ES,
+ 'no' => $T2H_WORDS_NO,
+ 'pt' => $T2H_WORDS_PT
+};
+
+@MONTH_NAMES_EN =
+(
+ 'January', 'February', 'March', 'April', 'May',
+ 'June', 'July', 'August', 'September', 'October',
+ 'November', 'December'
+);
+
+@MONTH_NAMES_DE =
+(
+ 'Januar', 'Februar', 'M&auml;rz', 'April', 'Mai',
+ 'Juni', 'Juli', 'August', 'September', 'Oktober',
+ 'November', 'Dezember'
+);
+
+@MONTH_NAMES_NL =
+(
+ 'Januari', 'Februari', 'Maart', 'April', 'Mei',
+ 'Juni', 'Juli', 'Augustus', 'September', 'Oktober',
+ 'November', 'December'
+);
+
+@MONTH_NAMES_ES =
+(
+ 'enero', 'febrero', 'marzo', 'abril', 'mayo',
+ 'junio', 'julio', 'agosto', 'septiembre', 'octubre',
+ 'noviembre', 'diciembre'
+);
+
+@MONTH_NAMES_NO =
+(
+
+ 'januar', 'februar', 'mars', 'april', 'mai',
+ 'juni', 'juli', 'august', 'september', 'oktober',
+ 'november', 'desember'
+);
+
+@MONTH_NAMES_PT =
+(
+ 'Janeiro', 'Fevereiro', 'Mar&ccedil;o', 'Abril', 'Maio',
+ 'Junho', 'Julho', 'Agosto', 'Setembro', 'Outubro',
+ 'Novembro', 'Dezembro'
+);
+
+
+$MONTH_NAMES =
+{
+    'en' => \@MONTH_NAMES_EN,
+    'de' => \@MONTH_NAMES_DE,
+    'es' => \@MONTH_NAMES_ES,
+    'nl' => \@MONTH_NAMES_NL,
+    'no' => \@MONTH_NAMES_NO,
+    'pt' => \@MONTH_NAMES_PT
+};
+########################################################################
+# Control of Page layout:
+# You can make changes of the Page layout at two levels:
+# 1.) For small changes, it is often enough to change the value of
+#     some global string/hash/array variables
+# 2.) For larger changes, reimplement one of the T2H_DEFAULT_<fnc>* routines,
+#     give them another name, and assign them to the respective
+#     $T2H_<fnc> variable.
+
+# As a general interface, the hashes T2H_HREF, T2H_NAME, T2H_NODE hold 
+# href, html-name, node-name of
+# This     -- current section (resp. html page)
+# Top      -- top page ($T2H_TOP_FILE)
+# Contents -- Table of contents
+# Overview -- Short table of contents
+# Index    -- Index page
+# About    -- page which explain "navigation buttons"
+# First    -- first node 
+# Last     -- last node
+#
+# Whether or not the following hash values are set, depends on the context 
+# (all values are w.r.t. 'This' section)
+# Next        -- next node of texinfo
+# Prev        -- previous node of texinfo
+# Up          -- up node of texinfo
+# Forward     -- next node in reading order
+# Back        -- previous node in reading order
+# FastForward -- if leave node, up and next, else next node
+# FastBackward-- if leave node, up and prev, else prev node
+#
+# Furthermore, the following global variabels are set:
+# $T2H_THISDOC{title}     -- title as set by @setttile
+# $T2H_THISDOC{fulltitle} -- full title as set by @title...
+# $T2H_THISDOC{subtitle}  -- subtitle as set by @subtitle
+# $T2H_THISDOC{author}    -- author as set by @author
+# 
+# and pointer to arrays of lines which need to be printed by t2h_print_lines 
+# $T2H_OVERVIEW      -- lines of short table of contents
+# $T2H_TOC           -- lines of table of contents
+# $T2H_TOP           -- lines of Top texinfo node 
+# $T2H_THIS_SECTION  -- lines of 'This' section
+
+#
+# There are the following subs which control the layout:
+#
+$T2H_print_section            = \&T2H_DEFAULT_print_section;
+$T2H_print_Top_header         = \&T2H_DEFAULT_print_Top_header;       
+$T2H_print_Top_footer	      = \&T2H_DEFAULT_print_Top_footer;       
+$T2H_print_Top		      = \&T2H_DEFAULT_print_Top;              
+$T2H_print_Toc		      = \&T2H_DEFAULT_print_Toc;              
+$T2H_print_Overview	      = \&T2H_DEFAULT_print_Overview;         
+$T2H_print_Footnotes	      = \&T2H_DEFAULT_print_Footnotes;        
+$T2H_print_About	      = \&T2H_DEFAULT_print_About;            
+$T2H_print_misc_header	      = \&T2H_DEFAULT_print_misc_header;      
+$T2H_print_misc_footer	      = \&T2H_DEFAULT_print_misc_footer;      
+$T2H_print_misc		      = \&T2H_DEFAULT_print_misc;
+$T2H_print_chapter_header     = \&T2H_DEFAULT_print_chapter_header;      
+$T2H_print_chapter_footer     = \&T2H_DEFAULT_print_chapter_footer;      
+$T2H_print_page_head	      = \&T2H_DEFAULT_print_page_head;        
+$T2H_print_page_foot	      = \&T2H_DEFAULT_print_page_foot;        
+$T2H_print_head_navigation    = \&T2H_DEFAULT_print_head_navigation;  
+$T2H_print_foot_navigation    = \&T2H_DEFAULT_print_foot_navigation;  
+$T2H_button_icon_img	      = \&T2H_DEFAULT_button_icon_img;        
+$T2H_print_navigation	      = \&T2H_DEFAULT_print_navigation;       
+$T2H_about_body		      = \&T2H_DEFAULT_about_body;            
+$T2H_print_frame              = \&T2H_DEFAULT_print_frame;
+$T2H_print_toc_frame          = \&T2H_DEFAULT_print_toc_frame;
+
+########################################################################
+# Layout for html for every sections
+#
+sub T2H_DEFAULT_print_section
+{
+  my $fh = shift;
+  local $T2H_BUTTONS = \@T2H_SECTION_BUTTONS;
+  &$T2H_print_head_navigation($fh) if $T2H_SECTION_NAVIGATION;
+  my $nw = t2h_print_lines($fh);
+  if ($T2H_SPLIT eq 'section' && $T2H_SECTION_NAVIGATION)
+  {
+    &$T2H_print_foot_navigation($fh, $nw);
+  }
+  else
+  {
+    print $fh '<HR SIZE="6">' . "\n";
+  }
+}
+
+###################################################################
+# Layout of top-page I recommend that you use @ifnothtml, @ifhtml,
+# @html within the Top texinfo node to specify content of top-level
+# page. 
+#
+# If you enclose everything in @ifnothtml, then title, subtitle,
+# author and overview is printed
+# T2H_HREF of Next, Prev, Up, Forward, Back are not defined
+# if $T2H_SPLIT then Top page is in its own html file
+sub T2H_DEFAULT_print_Top_header
+{
+  &$T2H_print_page_head(@_) if $T2H_SPLIT;
+  t2h_print_label(@_); # this needs to be called, otherwise no label set
+  &$T2H_print_head_navigation(@_);
+}
+sub T2H_DEFAULT_print_Top_footer
+{
+  &$T2H_print_foot_navigation(@_);
+  &$T2H_print_page_foot(@_) if $T2H_SPLIT; 
+}
+sub T2H_DEFAULT_print_Top
+{
+  my $fh = shift;
+
+  # for redefining navigation buttons use:
+  # local $T2H_BUTTONS = [...];
+  # as it is, 'Top', 'Contents', 'Index', 'About' are printed
+  local $T2H_BUTTONS = \@T2H_MISC_BUTTONS;
+  &$T2H_print_Top_header($fh);
+  if ($T2H_THIS_SECTION)
+  {
+    # if top-level node has content, then print it with extra header
+    print $fh "<H1>$T2H_NAME{Top}</H1>"
+      unless ($T2H_HAS_TOP_HEADING);
+    t2h_print_lines($fh, $T2H_THIS_SECTION)
+  }
+  else
+  {
+    # top-level node is fully enclosed in @ifnothtml
+    # print fulltitle, subtitle, author, Overview
+    print $fh 
+      "<CENTER>\n<H1>" .
+      join("</H1>\n<H1>", split(/\n/,  $T2H_THISDOC{fulltitle})) .
+      "</H1>\n";
+    print $fh "<H2>$T2H_THISDOC{subtitle}</H2>\n" if $T2H_THISDOC{subtitle};
+    print $fh "$T2H_THISDOC{author}\n" if $T2H_THISDOC{author};
+    print $fh <<EOT;
+</CENTER>
+<HR>
+<P></P>  
+<H2> Overview: </H2>
+<BLOCKQUOTE>  
+EOT
+    t2h_print_lines($fh, $T2H_OVERVIEW);
+    print $fh "</BLOCKQUOTE>\n";
+  }
+  &$T2H_print_Top_footer($fh);
+}
+
+###################################################################
+# Layout of Toc, Overview, and Footnotes pages
+# By default, we use "normal" layout 
+# T2H_HREF of Next, Prev, Up, Forward, Back, etc are not defined
+# use: local $T2H_BUTTONS = [...] to redefine navigation buttons
+sub T2H_DEFAULT_print_Toc
+{
+  return &$T2H_print_misc(@_);
+}
+sub T2H_DEFAULT_print_Overview
+{
+  return &$T2H_print_misc(@_);
+}
+sub T2H_DEFAULT_print_Footnotes
+{
+  return &$T2H_print_misc(@_);
+}
+sub T2H_DEFAULT_print_About
+{
+  return &$T2H_print_misc(@_);
+}
+
+sub T2H_DEFAULT_print_misc_header
+{
+  &$T2H_print_page_head(@_) if $T2H_SPLIT;
+  # this needs to be called, otherwise, no labels are set
+  t2h_print_label(@_); 
+  &$T2H_print_head_navigation(@_);
+}
+sub T2H_DEFAULT_print_misc_footer
+{
+  &$T2H_print_foot_navigation(@_);
+  &$T2H_print_page_foot(@_) if $T2H_SPLIT; 
+}
+sub T2H_DEFAULT_print_misc
+{
+  my $fh = shift;
+  local $T2H_BUTTONS = \@T2H_MISC_BUTTONS;
+  &$T2H_print_misc_header($fh);
+  print $fh "<H1>$T2H_NAME{This}</H1>\n";
+  t2h_print_lines($fh);
+  &$T2H_print_misc_footer($fh);
+}
+
+###################################################################
+# chapter_header and chapter_footer are only called if
+# T2H_SPLIT eq 'chapter'
+# chapter_header: after print_page_header, before print_section
+# chapter_footer: after print_section of last section, before print_page_footer
+# 
+# If you want to get rid of navigation stuff after each section,
+# redefine print_section such that it does not call print_navigation,
+# and put print_navigation into print_chapter_header
+@T2H_CHAPTER_BUTTONS =
+  (
+   'FastBack', 'FastForward', ' ', 
+   ' ', ' ', ' ', ' ',
+   'Top', 'Contents', 'Index', 'About', 
+  );
+
+sub T2H_DEFAULT_print_chapter_header
+{
+  # nothing to do there, by default
+  if (! $T2H_SECTION_NAVIGATION)
+  {
+    my $fh = shift;
+    local $T2H_BUTTONS = \@T2H_CHAPTER_BUTTONS;
+    &$T2H_print_navigation($fh);
+    print $fh "\n<HR SIZE=2>\n";
+  }
+}
+
+sub T2H_DEFAULT_print_chapter_footer
+{
+  local $T2H_BUTTONS = \@T2H_CHAPTER_BUTTONS;
+  &$T2H_print_navigation(@_);
+}
+###################################################################
+$T2H_TODAY = &pretty_date;		# like "20 September 1993"
+
+sub pretty_date {
+    local($sec, $min, $hour, $mday, $mon, $year, $wday, $yday, $isdst);
+
+    ($sec, $min, $hour, $mday, $mon, $year, $wday, $yday, $isdst) = localtime(time);
+    $year += ($year < 70) ? 2000 : 1900;
+    # obachman: Let's do it as the Americans do
+    return($MONTH_NAMES->{$T2H_LANG}[$mon] . ", " . $mday . " " . $year);
+}
+
+
+###################################################################
+# Layout of standard header and footer
+#
+
+# Set the default body text, inserted between <BODY ... > 
+###$T2H_BODYTEXT = 'LANG="EN" BGCOLOR="#FFFFFF" TEXT="#000000" LINK="#0000FF" VLINK="#800080" ALINK="#FF0000"';
+$T2H_BODYTEXT = 'LANG="' . $T2H_LANG . '" BGCOLOR="#FFFFFF" TEXT="#000000" LINK="#0000FF" VLINK="#800080" ALINK="#FF0000"';
+# text inserted after <BODY ...>
+$T2H_AFTER_BODY_OPEN = '';
+#text inserted before </BODY>
+$T2H_PRE_BODY_CLOSE = '';
+# this is used in footer
+$T2H_ADDRESS = "by <I>$T2H_USER</I> " if $T2H_USER;
+$T2H_ADDRESS .= "on <I>$T2H_TODAY</I>";
+# this is added inside <HEAD></HEAD> after <TITLE> and some META NAME stuff
+# can be used for <style> <script>, <meta> tags
+$T2H_EXTRA_HEAD = '';
+
+sub T2H_DEFAULT_print_page_head
+{
+  my $fh = shift; 
+  my $longtitle = "$T2H_THISDOC{title}: $T2H_NAME{This}";
+  print $fh <<EOT;
+<HTML>
+$T2H_DOCTYPE
+<!-- Created on $T2H_TODAY by $THISPROG -->
+<!-- 
+$T2H_AUTHORS 
+-->
+<HEAD>
+<TITLE>$longtitle</TITLE>
+
+<META NAME="description" CONTENT="$longtitle">
+<META NAME="keywords" CONTENT="$longtitle">
+<META NAME="resource-type" CONTENT="document">
+<META NAME="distribution" CONTENT="global">
+<META NAME="Generator" CONTENT="$THISPROG">
+$T2H_EXTRA_HEAD
+</HEAD>
+
+<BODY $T2H_BODYTEXT>
+$T2H_AFTER_BODY_OPEN
+EOT
+}
+
+sub T2H_DEFAULT_print_page_foot
+{
+  my $fh = shift;
+  print $fh <<EOT;
+<BR>  
+<FONT SIZE="-1">
+This document was generated
+$T2H_ADDRESS
+using <A HREF="$T2H_HOMEPAGE"><I>texi2html</I></A>
+$T2H_PRE_BODY_CLOSE
+</BODY>
+</HTML>
+EOT
+}
+
+###################################################################
+# Layout of navigation panel
+
+# if this is set, then a vertical navigation panel is used
+$T2H_VERTICAL_HEAD_NAVIGATION = 0;
+sub T2H_DEFAULT_print_head_navigation
+{
+  my $fh = shift;
+  if ($T2H_VERTICAL_HEAD_NAVIGATION)
+  {
+    print $fh <<EOT;
+<TABLE BORDER="0" CELLPADDING="0" CELLSPACING="0">
+<TR VALIGN="TOP">
+<TD ALIGN="LEFT">
+EOT
+  }
+  &$T2H_print_navigation($fh, $T2H_VERTICAL_HEAD_NAVIGATION);
+  if ($T2H_VERTICAL_HEAD_NAVIGATION)
+  {
+    print $fh <<EOT;
+</TD>
+<TD ALIGN="LEFT">
+EOT
+  }
+  elsif ($T2H_SPLIT eq 'section')
+  {
+    print $fh "<HR SIZE=1>\n";
+  }
+}
+
+# Specifies the minimum page length required before a navigation panel
+# is placed at the bottom of a page (the default is that of latex2html)
+# T2H_THIS_WORDS_IN_PAGE holds number of words of current page
+$T2H_WORDS_IN_PAGE = 300;
+sub T2H_DEFAULT_print_foot_navigation
+{
+  my $fh = shift;
+  my $nwords = shift;
+  if ($T2H_VERTICAL_HEAD_NAVIGATION)
+  {
+    print $fh <<EOT;
+</TD>
+</TR>
+</TABLE>
+EOT
+  }
+  print $fh "<HR SIZE=1>\n";
+  &$T2H_print_navigation($fh) if ($nwords >= $T2H_WORDS_IN_PAGE)
+}
+
+######################################################################
+# navigation panel
+#
+# specify in this array which "buttons" should appear in which order
+# in the navigation panel for sections; use ' ' for empty buttons (space)
+@T2H_SECTION_BUTTONS =
+  (
+   'Back', 'Forward', ' ', 'FastBack', 'Up', 'FastForward',  
+   ' ', ' ', ' ', ' ',
+   'Top', 'Contents', 'Index', 'About', 
+  );
+
+# buttons for misc stuff
+@T2H_MISC_BUTTONS = ('Top', 'Contents', 'Index', 'About');
+
+# insert here name of icon images for buttons 
+# Icons are used, if $T2H_ICONS and resp. value are set
+%T2H_ACTIVE_ICONS =
+  (
+   'Top',      '',
+   'Contents', '',
+   'Overview', '',
+   'Index',    '',
+   'Back',     '',
+   'FastBack', '',
+   'Prev',     '',
+   'Up',       '',
+   'Next',     '',
+   'Forward',  '',
+   'FastForward', '',
+   'About' ,    '',
+   'First',    '',
+   'Last',     '',
+   ' ',        ''
+  );
+
+# insert here name of icon images for these, if button is inactive
+%T2H_PASSIVE_ICONS =
+  (
+   'Top',      '',
+   'Contents', '',
+   'Overview', '',
+   'Index',    '',
+   'Back',     '',
+   'FastBack', '',
+   'Prev',     '',
+   'Up',       '',
+   'Next',     '',
+   'Forward',  '',
+   'FastForward', '',
+   'About',     '',
+   'First',    '',
+   'Last',     '',
+  );
+
+# how to create IMG tag
+sub T2H_DEFAULT_button_icon_img
+{
+  my $button = shift;
+  my $icon = shift;
+  my $name = shift;
+  return qq{<IMG SRC="$icon" BORDER="0" ALT="$button: $name" ALIGN="MIDDLE">};
+}
+
+# Names of text as alternative for icons
+%T2H_NAVIGATION_TEXT =
+  (
+   'Top',      'Top',
+   'Contents', 'Contents',
+   'Overview', 'Overview',
+   'Index',    'Index',
+   ' ',        ' &nbsp; ',
+   'Back',     ' &lt; ',
+   'FastBack', ' &lt;&lt; ',
+   'Prev',     'Prev',
+   'Up',       ' Up ',
+   'Next',     'Next',
+   'Forward',  ' &gt; ',
+   'FastForward',  ' &gt;&gt; ',
+   'About',     ' ? ',
+   'First',    ' |&lt; ',
+   'Last',     ' &gt;| '
+  );
+
+sub T2H_DEFAULT_print_navigation
+{
+  my $fh = shift;
+  my $vertical = shift;
+  my $spacing = 1;
+  print $fh "<TABLE CELLPADDING=$spacing CELLSPACING=$spacing BORDER=0>\n";
+
+  print $fh "<TR>" unless $vertical;
+  for $button (@$T2H_BUTTONS)
+  {
+    print $fh qq{<TR VALIGN="TOP" ALIGN="LEFT">\n} if $vertical;
+    print $fh qq{<TD VALIGN="MIDDLE" ALIGN="LEFT">};
+
+    if (ref($button) eq 'CODE')
+    {
+      &$button($fh, $vertical);
+    }
+    elsif ($button eq ' ')
+    { # handle space button
+      print $fh 
+	$T2H_ICONS && $T2H_ACTIVE_ICONS{' '} ? 
+	 &$T2H_button_icon_img($button, $T2H_ACTIVE_ICONS{' '}) :
+	 $T2H_NAVIGATION_TEXT{' '};
+      next;
+    }
+    elsif ($T2H_HREF{$button})
+    { # button is active
+      print $fh   
+	 $T2H_ICONS && $T2H_ACTIVE_ICONS{$button} ? # use icon ? 
+	   t2h_anchor('', $T2H_HREF{$button},  # yes
+		    &$T2H_button_icon_img($button,
+					$T2H_ACTIVE_ICONS{$button},
+					$T2H_NAME{$button})) 
+	 : # use text
+	 "[" . 
+	 t2h_anchor('', $T2H_HREF{$button}, $T2H_NAVIGATION_TEXT{$button}) .
+	 "]";  
+    }
+    else
+    { # button is passive 
+      print $fh 
+	$T2H_ICONS && $T2H_PASSIVE_ICONS{$button} ?
+	 &$T2H_button_icon_img($button,
+			       $T2H_PASSIVE_ICONS{$button},
+			       $T2H_NAME{$button}) :
+	 
+	 "[" . $T2H_NAVIGATION_TEXT{$button} . "]";
+    }
+    print $fh "</TD>\n";
+    print $fh "</TR>\n" if $vertical;
+  }
+  print $fh "</TR>" unless $vertical;
+  print $fh "</TABLE>\n";
+}
+
+######################################################################
+# Frames: this is from "Richard Y. Kim" <ryk@coho.net>
+# Should be improved to be more conforming to other _print* functions
+
+sub T2H_DEFAULT_print_frame
+{
+  my $fh = shift;
+  print $fh <<EOT;
+<HTML>
+<HEAD><TITLE>$T2H_THISDOC{title}</TITLE></HEAD>
+<FRAMESET cols="140,*"> 
+  <FRAME name=toc  src="$docu_toc_frame_file">
+  <FRAME name=main src="$docu_doc">
+</FRAMESET> 
+</HTML>
+EOT
+}
+
+sub T2H_DEFAULT_print_toc_frame
+{
+  my $fh = shift;
+  &$T2H_print_page_head($fh);
+  print $fh <<EOT;
+<H2>Content</H2>
+EOT
+  print $fh map {s/HREF=/target=\"main\" HREF=/; $_;} @stoc_lines;
+  print $fh "</BODY></HTML>\n";
+}
+
+######################################################################
+# About page
+#
+
+# T2H_PRE_ABOUT might be a function
+$T2H_PRE_ABOUT = <<EOT;
+This document was generated $T2H_ADDRESS
+using <A HREF="$T2H_HOMEPAGE"><I>texi2html</I></A>
+<P></P>  
+EOT
+$T2H_AFTER_ABOUT = '';
+
+sub T2H_DEFAULT_about_body
+{
+  my $about;
+  if (ref($T2H_PRE_ABOUT) eq 'CODE')
+  {
+    $about = &$T2H_PRE_ABOUT();
+  }
+  else
+  {
+    $about = $T2H_PRE_ABOUT;
+  }
+  $about .= <<EOT;
+The buttons in the navigation panels have the following meaning:
+<P></P>
+<table border = "1">
+<TR>
+<TH> Button </TH>
+<TH> Name </TH>
+<TH> Go to </TH>
+<TH> From 1.2.3 go to</TH>
+</TR>
+EOT
+  
+  for $button (@T2H_SECTION_BUTTONS)
+  {
+    next if $button eq ' ' || ref($button) eq 'CODE';
+    $about .= <<EOT;
+<TR>
+<TD ALIGN="CENTER">
+EOT
+    $about .= 	
+      ($T2H_ICONS && $T2H_ACTIVE_ICONS{$button} ?
+       &$T2H_button_icon_img($button, $T2H_ACTIVE_ICONS{$button}) :
+       " [" . $T2H_NAVIGATION_TEXT{$button} . "] ");
+    $about .= <<EOT;
+</TD>
+<TD ALIGN="CENTER">
+$button
+</TD>
+<TD>
+$T2H_BUTTONS_GOTO{$button}
+</TD>
+<TD>
+$T2H_BUTTONS_EXAMPLE{$button}
+</TD>
+</TR>
+EOT
+  }
+
+  $about .= <<EOT;
+</TABLE>
+<P></P>
+where the <STRONG> Example </STRONG> assumes that the current position 
+is at <STRONG> Subsubsection One-Two-Three </STRONG> of a document of 
+the following structure:
+<UL>
+<LI> 1. Section One  </LI>
+<UL>
+<LI>1.1 Subsection One-One</LI>
+<UL>
+<LI> ... </LI>
+</UL>
+<LI>1.2 Subsection One-Two</LI>
+<UL>
+<LI>1.2.1 Subsubsection One-Two-One
+</LI><LI>1.2.2 Subsubsection One-Two-Two
+</LI><LI>1.2.3 Subsubsection One-Two-Three &nbsp; &nbsp; <STRONG>
+&lt;== Current Position </STRONG>
+</LI><LI>1.2.4 Subsubsection One-Two-Four
+</LI></UL>
+<LI>1.3 Subsection One-Three</LI>
+<UL>
+<LI> ... </LI>
+</UL>
+<LI>1.4 Subsection One-Four</LI>
+</UL>
+</UL>
+$T2H_AFTER_ABOUT
+EOT
+  return $about;  
+}
+
+  
+%T2H_BUTTONS_GOTO =
+  (
+   'Top',      'cover (top) of document',
+   'Contents', 'table of contents',
+   'Overview', 'short table of contents',
+   'Index',    'concept index',
+   'Back',     'previous section in reading order',
+   'FastBack', 'previous or up-and-previous section ',
+   'Prev',     'previous section same level',
+   'Up',       'up section',
+   'Next',     'next section same level',
+   'Forward',  'next section in reading order',
+   'FastForward', 'next or up-and-next section',
+   'About' ,    'this page',
+   'First',    'first section in reading order',
+   'Last',     'last section in reading order',
+  );
+
+%T2H_BUTTONS_EXAMPLE = 
+(
+   'Top',      ' &nbsp; ',
+   'Contents', ' &nbsp; ',
+   'Overview', ' &nbsp; ',
+   'Index',    ' &nbsp; ',
+   'Back',     '1.2.2',
+   'FastBack', '1.1',
+   'Prev',     '1.2.2',
+   'Up',       '1.2',
+   'Next',     '1.2.4',
+   'Forward',  '1.2.4',
+   'FastForward', '1.3',
+   'About',     ' &nbsp; ',
+   'First',    '1.',
+   'Last',     '1.2.4',
+);
+
+
+######################################################################
+# from here on, its l2h init stuff 
+#
+
+## initialization for latex2html as for Singular manual generation
+## obachman 3/99
+
+#
+# Options controlling Titles, File-Names, Tracing and Sectioning
+#
+$TITLE = '';
+
+$SHORTEXTN = 0;
+
+$LONG_TITLES = 0;
+
+$DESTDIR = ''; # should be overwritten by cmd-line argument
+
+$NO_SUBDIR = 0;# should be overwritten by cmd-line argument
+
+$PREFIX = '';  # should be overwritten by cmd-line argument
+
+$AUTO_PREFIX = 0; # this is needed, so that prefix settings are used
+
+$AUTO_LINK = 0; 
+
+$SPLIT = 0;
+
+$MAX_LINK_DEPTH = 0;
+
+$TMP = ''; # should be overwritten by cmd-line argument
+
+$DEBUG = 0;
+
+$VERBOSE = 1;
+
+#
+# Options controlling Extensions and Special Features 
+#
+$HTML_VERSION = "3.2";
+
+$TEXDEFS = 1; # we absolutely need that
+
+$EXTERNAL_FILE = '';
+
+$SCALABLE_FONTS = 1;
+
+$NO_SIMPLE_MATH = 1;
+
+$LOCAL_ICONS = 1;
+
+$SHORT_INDEX = 0;
+
+$NO_FOOTNODE = 1;
+
+$ADDRESS = '';
+
+$INFO = '';
+
+#
+# Switches controlling Image Generation 
+#
+$ASCII_MODE = 0;
+
+$NOLATEX = 0;
+
+$EXTERNAL_IMAGES = 0;
+
+$PS_IMAGES = 0;
+
+$NO_IMAGES = 0;
+
+$IMAGES_ONLY = 0;
+
+$REUSE = 2;
+
+$ANTI_ALIAS = 1;
+
+$ANTI_ALIAS_TEXT = 1;
+
+#
+#Switches controlling Navigation Panels
+#
+$NO_NAVIGATION = 1;
+$ADDRESS = '';
+$INFO = 0;              # 0 = do not make a "About this document..." section 
+
+#
+#Switches for Linking to other documents 
+#
+# actuall -- we don't care
+
+$MAX_SPLIT_DEPTH = 0;	# Stop making separate files at this depth
+
+$MAX_LINK_DEPTH = 0;    # Stop showing child nodes at this depth   
+
+$NOLATEX = 0;           # 1 = do not pass unknown environments to Latex
+
+$EXTERNAL_IMAGES = 0;   # 1 = leave the images outside the document 
+
+$ASCII_MODE = 0;        # 1 = do not use any icons or internal images
+
+# 1 =  use links to external postscript images rather than inlined bitmap
+# images.
+$PS_IMAGES = 0;
+$SHOW_SECTION_NUMBERS = 0;
+
+### Other global variables ###############################################
+$CHILDLINE = "";
+
+# This is the line width measured in pixels and it is used to right justify
+# equations and equation arrays; 
+$LINE_WIDTH = 500;		
+
+# Used in conjunction with AUTO_NAVIGATION
+$WORDS_IN_PAGE = 300;	
+
+# Affects ONLY the way accents are processed 
+$default_language = 'english';	
+
+# The value of this variable determines how many words to use in each 
+# title that is added to the navigation panel (see below)
+# 
+$WORDS_IN_NAVIGATION_PANEL_TITLES = 0;
+
+# This number will determine the size of the equations, special characters,
+# and anything which will be converted into an inlined image
+# *except* "image generating environments" such as "figure", "table" 
+# or "minipage".
+# Effective values are those greater than 0.
+# Sensible values are between 0.1 - 4.
+$MATH_SCALE_FACTOR = 1.5;
+
+# This number will determine the size of 
+# image generating environments such as "figure", "table" or "minipage".
+# Effective values are those greater than 0.
+# Sensible values are between 0.1 - 4.
+$FIGURE_SCALE_FACTOR = 1.6;
+
+
+#  If both of the following two variables are set then the "Up" button
+#  of the navigation panel in the first node/page of a converted document
+#  will point to $EXTERNAL_UP_LINK. $EXTERNAL_UP_TITLE should be set
+#  to some text which describes this external link.
+$EXTERNAL_UP_LINK = "";
+$EXTERNAL_UP_TITLE = "";
+
+# If this is set then the resulting HTML will look marginally better if viewed 
+# with Netscape.
+$NETSCAPE_HTML = 1;
+
+# Valid paper sizes are "letter", "legal", "a4","a3","a2" and "a0"
+# Paper sizes has no effect other than in the time it takes to create inlined
+# images and in whether large images can be created at all ie
+#  - larger paper sizes *MAY* help with large image problems 
+#  - smaller paper sizes are quicker to handle
+$PAPERSIZE = "a4";
+
+# Replace "english" with another language in order to tell LaTeX2HTML that you 
+# want some generated section titles (eg "Table of Contents" or "References")
+# to appear in a different language. Currently only "english" and "french"
+# is supported but it is very easy to add your own. See the example in the
+# file "latex2html.config" 
+$TITLES_LANGUAGE = "english";
+
+1;	# This must be the last non-comment line
+
+# End File texi2html.init
+######################################################################
+
+
+require "$ENV{T2H_HOME}/texi2html.init" 
+  if ($0 =~ /\.pl$/ &&
+      -e "$ENV{T2H_HOME}/texi2html.init" && -r "$ENV{T2H_HOME}/texi2html.init");
+
+#+++############################################################################
+#                                                                              #
+# Initialization                                                               #
+# Pasted content of File $(srcdir)/MySimple.pm: Command-line processing        #
+#                                                                              #
+#---############################################################################
+
+# leave this within comments, and keep the require statement
+# This way, you can directly run texi2html.pl, if $ENV{T2H_HOME}/texi2html.init
+# exists.
+
+# 
+package Getopt::MySimple;
+
+# Name:
+#	Getopt::MySimple.
+#
+# Documentation:
+#	POD-style (incomplete) documentation is in file MySimple.pod
+#
+# Tabs:
+#	4 spaces || die.
+#
+# Author:
+#	Ron Savage	rpsavage@ozemail.com.au.
+#	1.00	19-Aug-97	Initial version.
+#	1.10	13-Oct-97	Add arrays of switches (eg '=s@').
+#	1.20	 3-Dec-97	Add 'Help' on a per-switch basis.
+#	1.30	11-Dec-97	Change 'Help' to 'verbose'. Make all hash keys lowercase.
+#	1.40	10-Nov-98	Change width of help report. Restructure tests.
+#               1-Jul-00        Modifications for Texi2html
+
+# --------------------------------------------------------------------------
+# Locally modified by obachman (Display type instead of env, order by cmp)
+# $Id: MySimple.pm,v 1.1 2000/07/03 08:44:13 obachman Exp $
+
+# use strict;
+# no strict 'refs';
+
+use vars qw(@EXPORT @EXPORT_OK @ISA);
+use vars qw($fieldWidth $opt $VERSION);
+
+use Exporter();
+use Getopt::Long;
+
+@ISA		= qw(Exporter);
+@EXPORT		= qw();
+@EXPORT_OK	= qw($opt);	# An alias for $self -> {'opt'}.
+
+# --------------------------------------------------------------------------
+
+$fieldWidth	= 20;
+$VERSION	= '1.41';
+
+# --------------------------------------------------------------------------
+
+sub byOrder
+{
+	my($self) = @_;
+	
+	return uc($a) cmp (uc($b));
+}
+
+# --------------------------------------------------------------------------
+
+sub dumpOptions
+{
+	my($self) = @_;
+
+	print 'Option', ' ' x ($fieldWidth - length('Option') ), "Value\n";
+
+	for (sort byOrder keys(%{$self -> {'opt'} }) )
+	{
+	  print "-$_", ' ' x ($fieldWidth - (1 + length) ), "${$self->{'opt'} }{$_}\n";
+	}
+
+	print "\n";
+
+}	# End of dumpOptions.
+
+# --------------------------------------------------------------------------
+# Return:
+#	0 -> Error.
+#	1 -> Ok.
+
+sub getOptions
+{
+	push(@_, 0) if ($#_ == 2);	# Default for $ignoreCase is 0.
+	push(@_, 1) if ($#_ == 3);	# Default for $helpThenExit is 1.
+
+	my($self, $default, $helpText, $versionText, 
+	   $helpThenExit, $versionThenExit, $ignoreCase) = @_;
+	
+	$helpThenExit = 1 unless (defined($helpThenExit));
+	$versionThenExit = 1 unless (defined($versionThenExit));
+	$ignoreCase = 0 unless (defined($ignoreCase));
+
+	$self -> {'default'}		= $default;
+	$self -> {'helpText'}		= $helpText;
+	$self -> {'versionText'}        = $versionText;
+	$Getopt::Long::ignorecase	= $ignoreCase;
+
+	unless (defined($self -> {'default'}{'help'}))
+	{
+	  $self -> {'default'}{'help'} = 
+	  { 
+	   type => ':i', 
+	   default => '',
+	   linkage => sub {$self->helpOptions($_[1]); exit (0) if $helpThenExit;},
+	   verbose => "print help and exit"
+	  };
+	}
+
+	unless (defined($self -> {'default'}{'version'}))
+	{
+	  $self -> {'default'}{'version'} = 
+	  { 
+	   type => '', 
+	   default => '',
+	   linkage => sub {print $self->{'versionText'};  exit (0) if versionTheExit;},
+	   verbose => "print version and exit"
+	  };
+	}
+
+	for (keys(%{$self -> {'default'} }) )
+	{
+	  my $type = ${$self -> {'default'} }{$_}{'type'};
+	  push(@{$self -> {'type'} }, "$_$type");
+	  $self->{'opt'}->{$_} =  ${$self -> {'default'} }{$_}{'linkage'}
+            if ${$self -> {'default'} }{$_}{'linkage'};
+	}
+
+	my($result) = &GetOptions($self -> {'opt'}, @{$self -> {'type'} });
+
+        return $result unless $result;
+
+	for (keys(%{$self -> {'default'} }) )
+	{
+ 	   if (! defined(${$self -> {'opt'} }{$_})) #{
+            {
+ 	     ${$self -> {'opt'} }{$_} = ${$self -> {'default'} }{$_}{'default'};
+            }
+	}
+
+	$result;
+}	# End of getOptions.
+
+# --------------------------------------------------------------------------
+
+sub helpOptions
+{
+	my($self) = shift;
+	my($noHelp) = shift;
+	$noHelp = 0 unless $noHelp;
+	my($optwidth, $typewidth, $defaultwidth, $maxlinewidth, $valind, $valwidth) 
+	  = (10, 5, 9, 78, 4, 11);
+
+	print "$self->{'helpText'}" if ($self -> {'helpText'});
+
+	print ' Option', ' ' x ($optwidth - length('Option') -1 ),
+		'Type', ' ' x ($typewidth - length('Type') + 1),
+		'Default', ' ' x ($defaultwidth - length('Default') ),
+	        "Description\n";
+
+	for (sort byOrder keys(%{$self -> {'default'} }) )
+	{
+	  my($line, $help, $option, $val);
+	  $option = $_;
+	  next if ${$self->{'default'} }{$_}{'noHelp'} && ${$self->{'default'} }{$_}{'noHelp'} > $noHelp;
+		$line = " -$_ " . ' ' x ($optwidth - (2 + length) ) .
+			"${$self->{'default'} }{$_}{'type'} ".
+			' ' x ($typewidth - (1+length(${$self -> {'default'} }{$_}{'type'}) ));
+
+                 $val = ${$self->{'default'} }{$_}{'linkage'};
+                if ($val)
+                {
+                  if (ref($val) eq 'SCALAR')
+		  {
+		    $val = $$val; 
+		  }
+		  else
+		  {
+		    $val = '';
+		  }
+                }
+		else
+		{
+		  $val = ${$self->{'default'} }{$_}{'default'};
+		}
+	        $line .= "$val  ";
+		$line .= ' ' x ($optwidth + $typewidth + $defaultwidth + 1 - length($line));
+		
+		if (defined(${$self -> {'default'} }{$_}{'verbose'}) &&
+		  ${$self -> {'default'} }{$_}{'verbose'} ne '')
+	      {
+		$help = "${$self->{'default'} }{$_}{'verbose'}";
+	      }
+	      else
+	      {
+		$help = ' ';
+	      }
+	      if ((length("$line") + length($help)) < $maxlinewidth)
+	      {
+		print $line , $help, "\n";
+	      }
+	      else
+	      {
+		print $line, "\n", ' ' x $valind, $help, "\n";
+	      }
+	      for $val (sort byOrder keys(%{${$self->{'default'}}{$option}{'values'}}))
+	      {
+	        print ' ' x ($valind + 2);
+	        print $val, '  ', ' ' x ($valwidth - length($val) - 2);
+	        print ${$self->{'default'}}{$option}{'values'}{$val}, "\n";
+	      }
+	}
+
+	print <<EOT;
+Note: 'Options' may be abbreviated. 'Type' specifications mean:
+ <none>| !    no argument: variable is set to 1 on -foo (or, to 0 on -nofoo)
+    =s | :s   mandatory (or, optional)  string argument
+    =i | :i   mandatory (or, optional)  integer argument
+EOT
+}	# End of helpOptions.
+
+#-------------------------------------------------------------------
+
+sub new
+{
+	my($class)				= @_;
+	my($self)				= {};
+	$self -> {'default'}	= {};
+	$self -> {'helpText'}	= '';
+	$self -> {'opt'}		= {};
+	$opt					= $self -> {'opt'};	 # An alias for $self -> {'opt'}.
+	$self -> {'type'}		= ();
+
+	return bless $self, $class;
+
+}	# End of new.
+
+# --------------------------------------------------------------------------
+
+1;
+
+# End MySimple.pm
+
+require "$ENV{T2H_HOME}/MySimple.pm" 
+  if ($0 =~ /\.pl$/ &&
+      -e "$ENV{T2H_HOME}/texi2html.init" && -r "$ENV{T2H_HOME}/texi2html.init");
+
+package main;
+
+#+++############################################################################
+#                                                                              #
+# Constants                                                                    #
+#                                                                              #
+#---############################################################################
+
+$DEBUG_TOC   =  1;
+$DEBUG_INDEX =  2;
+$DEBUG_BIB   =  4;
+$DEBUG_GLOSS =  8;
+$DEBUG_DEF   = 16;
+$DEBUG_HTML  = 32;
+$DEBUG_USER  = 64;
+$DEBUG_L2H   = 128;
+
+
+$BIBRE = '\[[\w\/-]+\]';		# RE for a bibliography reference
+$FILERE = '[\/\w.+-]+';			# RE for a file name
+$VARRE = '[^\s\{\}]+';			# RE for a variable name
+$NODERE = '[^,:]+';		        # RE for a node name
+$NODESRE = '[^:]+';		        # RE for a list of node names
+
+$ERROR = "***";			        # prefix for errors 
+$WARN  = "**";                          # prefix for warnings
+  
+                                        # program home page
+$PROTECTTAG = "_ThisIsProtected_";	# tag to recognize protected sections
+
+$CHAPTEREND = "<!-- End chapter -->\n"; # to know where a chpater ends
+$SECTIONEND = "<!-- End section -->\n"; # to know where section ends
+$TOPEND     = "<!-- End top     -->\n"; # to know where top ends
+
+  
+
+#
+# pre-defined indices
+#
+$index_properties =
+{
+ 'c' => { name => 'cp'},
+ 'f' => { name => 'fn', code => 1},
+ 'v' => { name => 'vr', code => 1},
+ 'k' => { name => 'ky', code => 1},
+ 'p' => { name => 'pg', code => 1},
+ 't' => { name => 'tp', code => 1}
+};
+
+
+%predefined_index = (
+		    'cp', 'c',
+		    'fn', 'f',
+		    'vr', 'v',
+		    'ky', 'k',
+		    'pg', 'p',
+		    'tp', 't',
+	            );
+
+#
+# valid indices
+#
+%valid_index = (
+		    'c', 1,
+		    'f', 1,
+		    'v', 1,
+		    'k', 1,
+		    'p', 1,
+		    't', 1,
+		);
+
+#
+# texinfo section names to level
+#
+%sec2level = (
+	      'top', 0,
+	      'chapter', 1,
+	      'unnumbered', 1,
+	      'majorheading', 1,
+	      'chapheading', 1,
+	      'appendix', 1,
+	      'section', 2,
+	      'unnumberedsec', 2,
+	      'heading', 2,
+	      'appendixsec', 2,
+	      'appendixsection', 2,
+	      'subsection', 3,
+	      'unnumberedsubsec', 3,
+	      'subheading', 3,
+	      'appendixsubsec', 3,
+	      'subsubsection', 4,
+	      'unnumberedsubsubsec', 4,
+	      'subsubheading', 4,
+	      'appendixsubsubsec', 4,
+	      );
+
+#
+# accent map, TeX command to ISO name
+#
+%accent_map = (
+	       '"',  'uml',
+	       '~',  'tilde',
+	       '^',  'circ',
+	       '`',  'grave',
+	       '\'', 'acute',
+	       );
+
+#
+# texinfo "simple things" (@foo) to HTML ones
+#
+%simple_map = (
+	       # cf. makeinfo.c
+	       "*", "<BR>",		# HTML+
+	       " ", " ",
+	       "\t", " ",
+  	       "-", "&#173;",	# soft hyphen
+	       "\n", "\n",
+	       "|", "",
+	       'tab', '<\/TD><TD>',
+	       # spacing commands
+	       ":", "",
+	       "!", "!",
+	       "?", "?",
+	       ".", ".",
+	       "-", "",
+	       );
+
+#
+# texinfo "things" (@foo{}) to HTML ones
+#
+%things_map = (
+	       'TeX', 'TeX',
+	       'br', '<P>',		# paragraph break
+	       'bullet', '*',
+	       'copyright', '(C)',
+	       'dots', '<small>...<\/small>',
+	       'enddots', '<small>....<\/small>',
+	       'equiv', '==',
+	       'error', 'error-->',
+	       'expansion', '==>',
+	       'minus', '-',
+	       'point', '-!-',
+	       'print', '-|',
+	       'result', '=>',
+	       'today', $T2H_TODAY,
+	       'aa', '&aring;',
+	       'AA', '&Aring;',
+	       'ae', '&aelig;',
+	       'oe', '&#156;',
+	       'AE', '&AElig;',
+	       'OE', '&#140;',
+	       'o',  '&oslash;',
+	       'O',  '&Oslash;',
+	       'ss', '&szlig;',
+	       'l', '\/l',
+	       'L', '\/L',
+	       'exclamdown', '&iexcl;',
+	       'questiondown', '&iquest;',
+	       'pounds', '&pound;'
+	       );
+
+#
+# texinfo styles (@foo{bar}) to HTML ones
+#
+%style_map = (
+	      'acronym', '&do_acronym',
+	      'asis', '',
+	      'b', 'B',
+	      'cite', 'CITE',
+	      'code', 'CODE',
+	      'command', 'CODE',
+	      'ctrl', '&do_ctrl',	# special case
+	      'dfn', 'EM',		# DFN tag is illegal in the standard
+	      'dmn', '',		# useless
+	      'email', '&do_email',     # insert a clickable email address
+	      'emph', 'EM',
+	      'env', 'CODE',
+	      'file', '"TT',		# will put quotes, cf. &apply_style
+	      'i', 'I',
+	      'kbd', 'KBD',
+	      'key', 'KBD',
+	      'math', '&do_math',
+	      'option', '"SAMP',        # will put quotes, cf. &apply_style
+	      'r', '',			# unsupported
+	      'samp', '"SAMP',		# will put quotes, cf. &apply_style
+	      'sc', '&do_sc',		# special case
+	      'strong', 'STRONG',
+	      't', 'TT',
+	      'titlefont', '',		# useless
+	      'uref', '&do_uref',       # insert a clickable URL
+	      'url', '&do_url',         # insert a clickable URL
+	      'var', 'VAR',
+	      'w', '',			# unsupported
+	      'H', '&do_accent',
+	      'dotaccent', '&do_accent',
+	      'ringaccent','&do_accent',
+	      'tieaccent', '&do_accent',
+	      'u','&do_accent',
+	      'ubaraccent','&do_accent',
+	      'udotaccent','&do_accent',
+	      'v', '&do_accent',
+	      ',', '&do_accent',
+	      'dotless', '&do_accent'
+	      );
+
+#
+# texinfo format (@foo/@end foo) to HTML ones
+#
+%format_map = (
+	       'quotation', 'BLOCKQUOTE',
+	       # lists
+	       'itemize', 'UL',
+	       'enumerate', 'OL',
+	       # poorly supported
+	       'flushleft', 'PRE',
+	       'flushright', 'PRE',
+	       );
+
+#
+# an eval of these $complex_format_map->{what}->[0] yields beginning
+# an eval of these $complex_format_map->{what}->[1] yieleds end
+$complex_format_map =
+{
+ example => 
+ [
+  q{"<TABLE><tr>$T2H_EXAMPLE_INDENT_CELL<td class=example><pre>"},
+  q{'</pre></td></tr></table>'}
+ ],
+ smallexample => 
+ [
+  q{"<TABLE><tr>$T2H_SMALL_EXAMPLE_INDENT_CELL<td class=smallexample><FONT SIZE=$T2H_SMALL_FONT_SIZE><pre>"},
+  q{'</FONT></pre></td></tr></table>'}
+ ],
+ display =>
+ [
+  q{"<TABLE><tr>$T2H_EXAMPLE_INDENT_CELL<td class=display><pre " . 'style="font-family: serif">'},
+  q{'</pre></td></tr></table>'}
+ ],
+ smalldisplay =>
+ [
+  q{"<TABLE><tr>$T2H_SMALL_EXAMPLE_INDENT_CELL<td class=smalldisplay><FONT SIZE=$T2H_SMALL_FONT_SIZE><pre " . 'style="font-family: serif">'},
+  q{'</pre></FONT></td></tr></table>'}
+ ]
+};
+
+$complex_format_map->{lisp} = $complex_format_map->{example};
+$complex_format_map->{smalllisp} = $complex_format_map->{smallexample};
+$complex_format_map->{format} = $complex_format_map->{display};
+$complex_format_map->{smallformat} = $complex_format_map->{smalldisplay};
+
+#
+# texinfo definition shortcuts to real ones
+#
+%def_map = (
+	    # basic commands
+	    'deffn', 0,
+	    'defvr', 0,
+	    'deftypefn', 0,
+	    'deftypevr', 0,
+	    'defcv', 0,
+	    'defop', 0,
+	    'deftp', 0,
+	    # basic x commands
+	    'deffnx', 0,
+	    'defvrx', 0,
+	    'deftypefnx', 0,
+	    'deftypevrx', 0,
+	    'defcvx', 0,
+	    'defopx', 0,
+	    'deftpx', 0,
+	    # shortcuts
+	    'defun', 'deffn Function',
+	    'defmac', 'deffn Macro',
+	    'defspec', 'deffn {Special Form}',
+	    'defvar', 'defvr Variable',
+	    'defopt', 'defvr {User Option}',
+	    'deftypefun', 'deftypefn Function',
+	    'deftypevar', 'deftypevr Variable',
+	    'defivar', 'defcv {Instance Variable}',
+	    'deftypeivar', 'defcv {Instance Variable}', # NEW: FIXME
+	    'defmethod', 'defop Method',
+	    'deftypemethod', 'defop Method', # NEW:FIXME
+	    # x shortcuts
+	    'defunx', 'deffnx Function',
+	    'defmacx', 'deffnx Macro',
+	    'defspecx', 'deffnx {Special Form}',
+	    'defvarx', 'defvrx Variable',
+	    'defoptx', 'defvrx {User Option}',
+	    'deftypefunx', 'deftypefnx Function',
+	    'deftypevarx', 'deftypevrx Variable',
+	    'defivarx', 'defcvx {Instance Variable}',
+	    'defmethodx', 'defopx Method',
+	    );
+
+#
+# things to skip
+#
+%to_skip = (
+	    # comments
+	    'c', 1,
+	    'comment', 1,
+            'ifnotinfo', 1,
+            'ifnottex', 1,
+	    'ifhtml', 1,
+	    'end ifhtml', 1,
+            'end ifnotinfo', 1,
+            'end ifnottex', 1,
+	    # useless
+	    'detailmenu', 1,
+            'direntry', 1,
+	    'contents', 1,
+	    'shortcontents', 1,
+	    'summarycontents', 1,
+	    'footnotestyle', 1,
+	    'end ifclear', 1,
+	    'end ifset', 1,
+	    'titlepage', 1,
+	    'end titlepage', 1,
+	    # unsupported commands (formatting)
+	    'afourpaper', 1,
+	    'cropmarks', 1,
+	    'finalout', 1,
+	    'headings', 1,
+            'sp', 1,
+	    'need', 1,
+	    'page', 1,
+	    'setchapternewpage', 1,
+	    'everyheading', 1,
+	    'everyfooting', 1,
+	    'evenheading', 1,
+	    'evenfooting', 1,
+	    'oddheading', 1,
+	    'oddfooting', 1,
+	    'smallbook', 1,
+	    'vskip', 1,
+	    'filbreak', 1,
+	    'paragraphindent', 1,
+	    # unsupported formats
+	    'cartouche', 1,
+	    'end cartouche', 1,
+	    'group', 1,
+	    'end group', 1,
+	    );
+
+#+++############################################################################
+#                                                                              #
+# Argument parsing, initialisation                                             #
+#                                                                              #
+#---############################################################################
+
+#
+# flush stdout and stderr after every write
+#
+select(STDERR);
+$| = 1;
+select(STDOUT);
+$| = 1;
+
+
+%value = ();				# hold texinfo variables, see also -D
+$use_bibliography = 1;
+$use_acc = 1;
+
+#
+# called on -init-file
+sub LoadInitFile
+{
+  my $init_file = shift;
+  # second argument is value of options
+  $init_file = shift;
+  if (-f $init_file)
+  {
+    print "# reading initialization file from $init_file\n" 
+      if ($T2H_VERBOSE);
+    require($init_file);
+  }
+  else
+  {
+    print "$ERROR Error: can't read init file $int_file\n";
+    $init_file = '';
+  }
+}
+
+#
+# called on -lang
+sub SetDocumentLanguage
+{
+  my $lang = shift;
+  if (! exists($T2H_WORDS->{$lang}))
+  {
+    warn "$ERROR: Language specs for '$lang' do not exists. Reverting to '" . 
+      ($T2H_LANG ? T2H_LANG : "en") . "'\n";
+  }
+  else
+  {
+    print "# using '$lang' as document language\n" if ($T2H_VERBOSE);
+    $T2H_LANG = $lang;
+  }
+}
+
+##
+## obsolete cmd line options
+##
+$T2H_OBSOLETE_OPTIONS -> {'no-section_navigation'} =
+{
+ type => '!',
+ linkage => sub {$main::T2H_SECTION_NAVIGATION = 0;},
+ verbose => 'obsolete, use -nosec_nav',
+ noHelp => 2,
+};
+$T2H_OBSOLETE_OPTIONS -> {use_acc} =
+{
+ type => '!',
+ linkage => \$use_acc,
+ verbose => 'obsolete',
+ noHelp => 2
+};
+$T2H_OBSOLETE_OPTIONS -> {expandinfo} =
+{
+ type => '!',
+ linkage => sub {$main::T2H_EXPAND = 'info';},
+ verbose => 'obsolete, use "-expand info" instead',
+ noHelp => 2,
+};
+$T2H_OBSOLETE_OPTIONS -> {expandtex} =
+{
+ type => '!',
+ linkage => sub {$main::T2H_EXPAND = 'tex';},
+ verbose => 'obsolete, use "-expand tex" instead',
+ noHelp => 2,
+};
+$T2H_OBSOLETE_OPTIONS -> {monolithic} =
+{
+ type => '!',
+ linkage => sub {$main::T2H_SPLIT = '';},
+ verbose => 'obsolete, use "-split no" instead',
+ noHelp => 2
+};
+$T2H_OBSOLETE_OPTIONS -> {split_node} =
+{
+ type => '!',
+ linkage => sub{$main::T2H_SPLIT = 'section';},
+ verbose => 'obsolete, use "-split section" instead',
+ noHelp => 2,
+};
+$T2H_OBSOLETE_OPTIONS -> {split_chapter} =
+{
+ type => '!',
+ linkage => sub{$main::T2H_SPLIT = 'chapter';},
+ verbose => 'obsolete, use "-split chapter" instead',
+ noHelp => 2,
+};
+$T2H_OBSOLETE_OPTIONS -> {no_verbose} =
+{
+ type => '!',
+ linkage => sub {$main::T2H_VERBOSE = 0;},
+ verbose => 'obsolete, use -noverbose instead',
+ noHelp => 2,
+};
+$T2H_OBSOLETE_OPTIONS -> {output_file} =
+{
+ type => '=s',
+ linkage => sub {$main::T2H_OUT = @_[1]; $T2H_SPLIT = '';},
+ verbose => 'obsolete, use -out_file instead',
+ noHelp => 2
+};
+
+$T2H_OBSOLETE_OPTIONS -> {section_navigation} =
+{
+ type => '!',
+ linkage => \$T2H_SECTION_NAVIGATION,
+ verbose => 'obsolete, use -sec_nav instead',
+ noHelp => 2,
+};
+
+$T2H_OBSOLETE_OPTIONS -> {verbose} =
+{
+ type => '!',
+ linkage => \$T2H_VERBOSE,
+ verbose => 'obsolete, use -Verbose instead',
+ noHelp => 2
+};
+
+# read initialzation from $sysconfdir/texi2htmlrc or $HOME/.texi2htmlrc
+my $home = $ENV{HOME};
+defined($home) or $home = '';
+foreach $i ('/usr/local/etc/texi2htmlrc', "$home/.texi2htmlrc") {
+    if (-f $i) {
+	print "# reading initialization file from $i\n" 
+	    if ($T2H_VERBOSE);
+	require($i);
+    }
+}
+
+
+#+++############################################################################
+#                                                                              #
+# parse command-line options
+#                                                                              #
+#---############################################################################
+$T2H_USAGE_TEXT = <<EOT;
+Usage: texi2html  [OPTIONS] TEXINFO-FILE
+Translates Texinfo source documentation to HTML.
+EOT
+$T2H_FAILURE_TEXT = <<EOT;
+Try 'texi2html -help' for usage instructions.
+EOT
+$options = new Getopt::MySimple;
+
+# some older version of GetOpt::Long don't have 
+# Getopt::Long::Configure("pass_through")
+eval {Getopt::Long::Configure("pass_through");};
+$Configure_failed = $@ && <<EOT;
+**WARNING: Parsing of obsolete command-line options could have failed. 
+           Consider to use only documented command-line options (run
+           'texi2html -help 2' for a complete list) or upgrade to perl 
+           version 5.005 or higher.
+EOT
+
+if (! $options->getOptions($T2H_OPTIONS, $T2H_USAGE_TEXT, "$THISVERSION\n"))
+{
+  print $Configure_failed if $Configure_failed;
+  die $T2H_FAILURE_TEXT;
+}
+
+if (@ARGV > 1)
+{
+  eval {Getopt::Long::Configure("no_pass_through");};
+  if (! $options->getOptions($T2H_OBSOLETE_OPTIONS, $T2H_USAGE_TEXT, "$THISVERSION\n"))
+  {
+    print $Configure_failed if $Configure_failed;
+    die $T2H_FAILURE_TEXT;
+  }
+}
+
+if ($T2H_CHECK) {
+    die "Need file to check\n$T2H_FAILURE_TEXT" unless @ARGV > 0;
+    &check;
+    exit;
+}
+
+#+++############################################################################
+#                                                                              #
+# evaluation of cmd line options
+#                                                                              #
+#---############################################################################
+
+if ($T2H_EXPAND eq 'info') 
+{
+  $to_skip{'ifinfo'} = 1;
+  $to_skip{'end ifinfo'} = 1;
+} 
+elsif ($T2H_EXPAND eq 'tex')
+{
+  $to_skip{'iftex'} = 1;
+  $to_skip{'end iftex'} = 1;
+  
+}
+
+$T2H_INVISIBLE_MARK = '<IMG SRC="invisible.xbm">' if $T2H_INVISIBLE_MARK eq 'xbm';
+
+#
+# file name buisness
+#
+die "Need exactly one file to translate\n$T2H_FAILURE_TEXT" unless @ARGV == 1;
+$docu = shift(@ARGV);
+if ($docu =~ /.*\//) {
+    chop($docu_dir = $&);
+    $docu_name = $';
+} else {
+    $docu_dir = '.';
+    $docu_name = $docu;
+}
+unshift(@T2H_INCLUDE_DIRS, $docu_dir);
+$docu_name =~ s/\.te?x(i|info)?$//;	# basename of the document
+$docu_name = $T2H_PREFIX if ($T2H_PREFIX);
+
+# subdir
+if ($T2H_SUBDIR && ! $T2H_OUT)
+{
+  $T2H_SUBDIR =~ s|/*$||;
+  unless (-d "$T2H_SUBDIR" && -w "$T2H_SUBDIR")
+  {
+    if ( mkdir($T2H_SUBDIR, oct(755)))
+    {
+      print "# created directory $T2H_SUBDIR\n" if ($T2H_VERBOSE);
+    }
+    else
+    {
+      warn "$ERROR can't create directory $T2H_SUBDIR. Put results into current directory\n";
+      $T2H_SUBDIR = '';
+    }
+  }
+}
+
+if ($T2H_SUBDIR && ! $T2H_OUT)
+{
+  $docu_rdir = "$T2H_SUBDIR/";
+  print "# putting result files into directory $docu_rdir\n" if ($T2H_VERBOSE);
+}
+else
+{
+  if ($T2H_OUT && $T2H_OUT =~ m|(.*)/|)
+  {
+    $docu_rdir = "$1/";
+    print "# putting result files into directory $docu_rdir\n" if ($T2H_VERBOSE);
+  }
+  else
+  {
+    print "# putting result files into current directory \n" if ($T2H_VERBOSE);
+    $docu_rdir = '';
+  }
+}
+
+# extension
+if ($T2H_SHORTEXTN)
+{
+  $docu_ext = "htm";
+}
+else
+{
+  $docu_ext = "html";
+}
+if ($T2H_TOP_FILE =~ /\..*$/)
+{
+  $T2H_TOP_FILE = $`.".$docu_ext";
+}
+
+# result files
+if (! $T2H_OUT && ($T2H_SPLIT =~ /section/i || $T2H_SPLIT =~ /node/i))
+{
+  $T2H_SPLIT = 'section';
+}
+elsif (! $T2H_OUT && $T2H_SPLIT =~ /chapter/i)
+{
+  $T2H_SPLIT = 'chapter'
+}
+else
+{
+  undef $T2H_SPLIT;
+}
+
+$docu_doc = "$docu_name.$docu_ext";		# document's contents
+$docu_doc_file = "$docu_rdir$docu_doc";
+if ($T2H_SPLIT) 
+{
+  $docu_toc  = $T2H_TOC_FILE || "${docu_name}_toc.$docu_ext"; # document's table of contents
+  $docu_stoc = "${docu_name}_ovr.$docu_ext"; # document's short toc
+  $docu_foot = "${docu_name}_fot.$docu_ext"; # document's footnotes
+  $docu_about = "${docu_name}_abt.$docu_ext"; # about this document
+  $docu_top  = $T2H_TOP_FILE || $docu_doc;
+}
+else
+{
+  if ($T2H_OUT)
+  {
+    $docu_doc = $T2H_OUT;
+    $docu_doc =~ s|.*/||;
+  }
+  $docu_toc = $docu_foot = $docu_stoc = $docu_about = $docu_top = $docu_doc;
+}
+
+$docu_toc_file  = "$docu_rdir$docu_toc";
+$docu_stoc_file = "$docu_rdir$docu_stoc";
+$docu_foot_file = "$docu_rdir$docu_foot";
+$docu_about_file = "$docu_rdir$docu_about";
+$docu_top_file  = "$docu_rdir$docu_top";
+
+$docu_frame_file =     "$docu_rdir${docu_name}_frame.$docu_ext";
+$docu_toc_frame_file = "$docu_rdir${docu_name}_toc_frame.$docu_ext";
+
+#
+# variables
+#
+$value{'html'} = 1;			# predefine html (the output format)
+$value{'texi2html'} = $THISVERSION;	# predefine texi2html (the translator)
+# _foo: internal to track @foo
+foreach ('_author', '_title', '_subtitle',
+	 '_settitle', '_setfilename', '_shorttitle') {
+    $value{$_} = '';		        # prevent -w warnings
+}
+%node2sec = ();				# node to section name
+%sec2node = ();				# section to node name
+%sec2number = ();                       # section to number
+%number2sec = ();                       # number to section 
+%idx2node = ();                         # index keys to node
+%node2href = ();			# node to HREF
+%node2next = ();			# node to next
+%node2prev = ();			# node to prev
+%node2up   = ();			# node to up
+%bib2href = ();				# bibliography reference to HREF
+%gloss2href = ();			# glossary term to HREF
+@sections = ();				# list of sections
+%tag2pro = ();				# protected sections
+
+#
+# initial indexes
+#
+$bib_num = 0;
+$foot_num = 0;
+$gloss_num = 0;
+$idx_num = 0;
+$sec_num = 0;
+$doc_num = 0;
+$html_num = 0;
+
+#
+# can I use ISO8879 characters? (HTML+)
+#
+if ($T2H_USE_ISO) {
+    $things_map{'bullet'} = "&bull;";
+    $things_map{'copyright'} = "&copy;";
+    $things_map{'dots'} = "&hellip;";
+    $things_map{'equiv'} = "&equiv;";
+    $things_map{'expansion'} = "&rarr;";
+    $things_map{'point'} = "&lowast;";
+    $things_map{'result'} = "&rArr;";
+}
+
+#
+# read texi2html extensions (if any)
+#
+$extensions = 'texi2html.ext'; # extensions in working directory
+if (-f $extensions) {
+    print "# reading extensions from $extensions\n" if $T2H_VERBOSE;
+    require($extensions);
+}
+($progdir = $0) =~ s/[^\/]+$//;
+if ($progdir && ($progdir ne './')) {
+    $extensions = "${progdir}texi2html.ext"; # extensions in texi2html directory
+    if (-f $extensions) {
+	print "# reading extensions from $extensions\n" if $T2H_VERBOSE;
+	require($extensions);
+    }
+}
+
+
+print "# reading from $docu\n" if $T2H_VERBOSE;
+
+#########################################################################
+#
+# latex2html stuff
+# 
+# latex2html conversions consist of three stages:
+# 1) ToLatex: Put "latex" code into a latex file
+# 2) ToHtml: Use latex2html to generate corresponding html code and images
+# 3) FromHtml: Extract generated code and images from latex2html run
+#
+
+##########################
+# default settings
+#
+
+# defaults for files and names
+
+sub l2h_Init 
+{
+  local($root) = @_;
+  
+  return 0 unless ($root);
+  
+  $l2h_name =  "${root}_l2h";
+  
+  $l2h_latex_file = "$docu_rdir${l2h_name}.tex";
+  $l2h_cache_file = "${docu_rdir}l2h_cache.pm";
+  $T2H_L2H_L2H = "latex2html" unless ($T2H_L2H_L2H);
+  
+  # destination dir -- generated images are put there, should be the same
+  # as dir of enclosing html document -- 
+  $l2h_html_file = "$docu_rdir${l2h_name}.html";
+  $l2h_prefix = "${l2h_name}_";
+  return 1;
+}
+
+
+##########################
+# 
+# First stage: Generation of Latex file
+# Initialize with: l2h_InitToLatex
+# Add content with: l2h_ToLatex($text) --> HTML placeholder comment
+# Finish with: l2h_FinishToLatex
+# 
+
+$l2h_latex_preample = <<EOT;
+% This document was automatically generated by the l2h extenstion of texi2html
+% DO NOT EDIT !!!
+\\documentclass{article}
+\\usepackage{html}
+\\begin{document}
+EOT
+
+$l2h_latex_closing = <<EOT;
+\\end{document}
+EOT
+
+# return used latex 1, if l2h could be initalized properly, 0 otherwise
+sub l2h_InitToLatex
+{
+  %l2h_to_latex = ();
+  unless ($T2H_L2H_SKIP)
+  {
+    unless (open(L2H_LATEX, ">$l2h_latex_file"))
+    {
+      warn "$ERROR Error l2h: Can't open latex file '$latex_file' for writing\n";
+      return 0;
+    }  
+    print "# l2h: use ${l2h_latex_file} as latex file\n" if ($T2H_VERBOSE);
+    print L2H_LATEX $l2h_latex_preample;
+  }
+  # open database for caching
+  l2h_InitCache();
+  $l2h_latex_count = 0;
+  $l2h_to_latex_count = 0;
+  $l2h_cached_count = 0;
+  return  1;
+}
+
+# print text (1st arg) into latex file (if not already there), return
+# HTML commentary which can be later on replaced by the latex2html
+# generated text
+sub l2h_ToLatex
+{
+  my($text) = @_;
+  my($count);
+  
+  $l2h_to_latex_count++;
+  $text =~ s/(\s*)$//;
+  
+  # try whether we can cache it
+  my $cached_text = l2h_FromCache($text);
+  if ($cached_text)
+  {
+    $l2h_cached_count++;
+    return $cached_text;
+  }
+  
+  # try whether we have text already on things to do
+  unless ($count = $l2h_to_latex{$text})
+  {
+    $count = $l2h_latex_count;
+    $l2h_latex_count++;
+    $l2h_to_latex{$text} = $count;
+    $l2h_to_latex[$count] = $text;
+    unless ($T2H_L2H_SKIP)
+    {
+      print L2H_LATEX "\\begin{rawhtml}\n";
+      print L2H_LATEX "<!-- l2h_begin ${l2h_name} ${count} -->\n";
+      print L2H_LATEX "\\end{rawhtml}\n";
+      
+      print L2H_LATEX "$text\n";
+      
+      print L2H_LATEX "\\begin{rawhtml}\n";
+      print L2H_LATEX "<!-- l2h_end ${l2h_name} ${count} -->\n";
+      print L2H_LATEX "\\end{rawhtml}\n";
+    }
+  }
+  return "<!-- l2h_replace ${l2h_name} ${count} -->"; 
+}
+
+# print closing into latex file and close it
+sub l2h_FinishToLatex
+{
+  local ($reused);
+  
+  $reused = $l2h_to_latex_count - $l2h_latex_count - $l2h_cached_count;
+  unless ($T2H_L2H_SKIP)
+  {
+    print L2H_LATEX $l2h_latex_closing;
+    close(L2H_LATEX);
+  }
+  print "# l2h: finished to latex ($l2h_cached_count cached, $reused reused, $l2h_latex_count contents)\n" if ($T2H_VERBOSE);
+  unless ($l2h_latex_count)
+  {
+    l2h_Finish();
+    return 0;
+  }
+  return 1;
+}
+
+###################################
+# Second stage: Use latex2html to generate corresponding html code and images
+#
+# l2h_ToHtml([$l2h_latex_file, [$l2h_html_dir]]):
+#   Call latex2html on $l2h_latex_file
+#   Put images (prefixed with $l2h_name."_") and html file(s) in $l2h_html_dir
+#   Return 1, on success
+#          0, otherwise
+#
+sub l2h_ToHtml
+{
+  local($call, $ext, $root, $dotbug);
+  
+  if ($T2H_L2H_SKIP)
+  {
+    print "# l2h: skipping latex2html run\n" if ($T2H_VERBOSE);
+    return 1;
+  }
+  
+  # Check for dot in directory where dvips will work
+  if ($T2H_L2H_TMP)
+  {
+    if ($T2H_L2H_TMP =~ /\./)
+    {
+      warn "$ERROR Warning l2h: l2h_tmp dir contains a dot. Use /tmp, instead\n";
+      $dotbug = 1;
+    }
+  }
+  else
+  {
+    if (&getcwd =~ /\./)
+    {
+     warn "$ERROR Warning l2h: current dir contains a dot. Use /tmp as l2h_tmp dir \n";
+     $dotbug = 1;
+   }
+  }
+  # fix it, if necessary and hope that it works 
+  $T2H_L2H_TMP = "/tmp" if ($dotbug);
+    
+  $call = $T2H_L2H_L2H;
+  # use init file, if specified
+  $call = $call . " -init_file " . $init_file if ($init_file && -f $init_file);
+  # set output dir
+  $call .=  ($docu_rdir ? " -dir $docu_rdir" : " -no_subdir");
+  # use l2h_tmp, if specified
+  $call = $call . " -tmp $T2H_L2H_TMP" if ($T2H_L2H_TMP);
+  # options we want to be sure of
+  $call = $call ." -address 0 -info 0 -split 0 -no_navigation -no_auto_link";
+  $call = $call ." -prefix ${l2h_prefix} $l2h_latex_file"; 
+
+  print "# l2h: executing '$call'\n" if ($T2H_VERBOSE);
+  if (system($call))
+  {
+    warn "l2h ***Error: '${call}' did not succeed\n";
+    return 0;
+  }
+  else
+  {
+    print "# l2h: latex2html finished successfully\n" if ($T2H_VERBOSE);
+    return 1;
+  }
+}
+
+# this is directly pasted over from latex2html
+sub getcwd {
+    local($_) = `pwd`;
+
+    die "'pwd' failed (out of memory?)\n"
+	unless length;
+    chop;
+    $_;
+}
+
+
+##########################
+# Third stage: Extract generated contents from latex2html run
+# Initialize with: l2h_InitFromHtml
+#   open $l2h_html_file for reading
+#   reads in contents into array indexed by numbers
+#   return 1,  on success -- 0, otherwise
+# Extract Html code with: l2h_FromHtml($text)
+#   replaces in $text all previosuly inserted comments by generated html code
+#   returns (possibly changed) $text
+# Finish with: l2h_FinishFromHtml
+#   closes $l2h_html_dir/$l2h_name.".$docu_ext" 
+
+sub l2h_InitFromHtml
+{
+  local($h_line, $h_content, $count, %l2h_img);
+
+  if (! open(L2H_HTML, "<${l2h_html_file}"))
+  {
+    print "$ERROR Error l2h: Can't open ${l2h_html_file} for reading\n";
+    return 0;
+  }
+  print "# l2h: use ${l2h_html_file} as html file\n" if ($T2H_VERBOSE);
+
+  $l2h_html_count = 0;
+  
+  while ($h_line = <L2H_HTML>)
+  {
+    if ($h_line =~ /^<!-- l2h_begin $l2h_name ([0-9]+) -->/)
+    {
+      $count = $1;
+      $h_content = "";
+      while ($h_line = <L2H_HTML>)
+      {
+	if ($h_line =~ /^<!-- l2h_end $l2h_name $count -->/)
+	{
+	  chomp $h_content;
+	  chomp $h_content;
+	  $l2h_html_count++;
+	  $h_content = l2h_ToCache($count, $h_content);
+	  $l2h_from_html[$count] = $h_content;
+	  $h_content = '';
+	  last;
+	}
+	$h_content = $h_content.$h_line;
+      }
+      if ($hcontent)
+      {
+	print "$ERROR Warning l2h: l2h_end $l2h_name $count not found\n" 
+	  if ($T2H_VERBOSE);
+	close(L2H_HTML);
+	return 0;
+      }
+    }
+  }
+  print "# l2h: Got $l2h_html_count of $l2h_latex_count html contents\n"
+    if ($T2H_VERBOSE);
+
+  close(L2H_HTML);
+  return 1;
+}
+
+sub l2h_FromHtml
+{
+  local($text) = @_;
+  local($done, $to_do, $count);
+  
+  $to_do = $text;
+  
+  while ($to_do =~ /([^\000]*)<!-- l2h_replace $l2h_name ([0-9]+) -->([^\000]*)/)
+  {
+    $to_do = $1;
+    $count = $2;
+    $done = $3.$done;
+    
+    $done = "<!-- l2h_end $l2h_name $count -->".$done
+      if ($T2H_DEBUG & $DEBUG_L2H);
+
+    $done = &l2h_ExtractFromHtml($count) . $done;
+
+    $done = "<!-- l2h_begin $l2h_name $count -->".$done
+      if ($T2H_DEBUG & $DEBUG_L2H);
+  }
+  return $to_do.$done;
+}
+
+
+sub l2h_ExtractFromHtml
+{
+  local($count) = @_;
+  
+  return $l2h_from_html[$count] if ($l2h_from_html[$count]);
+  
+  if ($count >= 0 && $count < $l2h_latex_count)
+  {
+    # now we are in trouble
+    local($l_l2h, $_);
+
+    $l2h_extract_error++;
+    print "$ERROR l2h: can't extract content $count from html\n" 
+      if ($T2H_VERBOSE);
+    # try simple (ordinary) substition (without l2h)
+    $l_l2h = $T2H_L2H;
+    $T2H_L2H = 0;
+    $_ = $l2h_to_latex{$count};
+    $_ = &substitute_style($_); 
+    &unprotect_texi;
+    $_ = "<!-- l2h: ". __LINE__ . " use texi2html -->" . $_
+      if ($T2H_DEBUG & $DEBUG_L2H);
+    $T2H_L2H = $l_l2h;
+    return $_;
+  }
+  else
+  {
+    # now we have been incorrectly called
+    $l2h_range_error++;
+    print "$ERROR l2h: Request of $count content which is out of valide range [0,$l2h_latex_count)\n";
+    return "<!-- l2h: ". __LINE__ . " out of range count $count -->"
+      if ($T2H_DEBUG & $DEBUG_L2H);
+    return "<!-- l2h: out of range count $count -->";
+  }
+}
+    
+sub l2h_FinishFromHtml
+{
+  if ($T2H_VERBOSE)
+  {
+    if ($l2h_extract_error + $l2h_range_error)
+    {
+      print "# l2h: finished from html ($l2h_extract_error extract and $l2h_range_error errors)\n";
+    }
+    else
+    {
+      print "# l2h: finished from html (no errors)\n";
+    }
+  }
+}
+
+sub l2h_Finish
+{
+  l2h_StoreCache();
+  if ($T2H_L2H_CLEAN)
+  {
+    print "# l2h: removing temporary files generated by l2h extension\n"
+      if $T2H_VERBOSE;
+    while (<"$docu_rdir$l2h_name"*>)
+    {
+      unlink $_;
+    }
+  }
+  print "# l2h: Finished\n" if $T2H_VERBOSE;
+  return 1;
+}
+
+##############################
+# stuff for l2h caching
+#
+
+# I tried doing this with a dbm data base, but it did not store all
+# keys/values. Hence, I did as latex2html does it
+sub l2h_InitCache
+{
+  if (-r "$l2h_cache_file")
+  {
+    my $rdo = do "$l2h_cache_file";
+    warn("$ERROR l2h Error: could not load $docu_rdir$l2h_cache_file: $@\n")
+      unless ($rdo);
+  }
+}
+
+sub l2h_StoreCache
+{
+  return unless $l2h_latex_count;
+  
+  my ($key, $value);
+  open(FH, ">$l2h_cache_file") || return warn"$ERROR l2h Error: could not open $docu_rdir$l2h_cache_file for writing: $!\n";
+
+  
+  while (($key, $value) = each %l2h_cache)
+  {
+    # escape stuff
+    $key =~ s|/|\\/|g;
+    $key =~ s|\\\\/|\\/|g;
+    # weird, a \ at the end of the key results in an error
+    # maybe this also broke the dbm database stuff
+    $key =~ s|\\$|\\\\|;
+    $value =~ s/\|/\\\|/g; 
+    $value =~ s/\\\\\|/\\\|/g; 
+    $value =~ s|\\\\|\\\\\\\\|g;
+    print FH "\n\$l2h_cache_key = q/$key/;\n";
+    print FH "\$l2h_cache{\$l2h_cache_key} = q|$value|;\n";
+  }
+  print FH "1;";
+  close(FH);
+}
+
+# return cached html, if it exists for text, and if all pictures
+# are there, as well
+sub l2h_FromCache
+{
+  my $text = shift;
+  my $cached = $l2h_cache{$text};
+  if ($cached)
+  {
+    while ($cached =~ m/SRC="(.*?)"/g)
+    {
+      unless (-e "$docu_rdir$1")
+      {
+	return undef;
+      }
+    }
+    return $cached;
+  }
+  return undef;
+}
+
+# insert generated html into cache, move away images, 
+# return transformed html
+$maximage = 1;
+sub l2h_ToCache
+{
+  my $count = shift;
+  my $content = shift;
+  my @images = ($content =~ /SRC="(.*?)"/g);
+  my ($src, $dest);
+
+  for $src (@images)
+  {
+    $dest = $l2h_img{$src};
+    unless ($dest)
+    {
+      my $ext;
+      if ($src =~ /.*\.(.*)$/ && $1 ne $docu_ext)
+      {
+	$ext = $1;
+      }
+      else
+      {
+	warn "$ERROR: L2h image $src has invalid extension\n";
+	next;
+      }
+      while (-e "$docu_rdir${docu_name}_$maximage.$ext") { $maximage++;}
+      $dest = "${docu_name}_$maximage.$ext";
+      system("cp -f $docu_rdir$src $docu_rdir$dest");
+      $l2h_img{$src} = $dest;
+      unlink "$docu_rdir$src" unless ($DEBUG & DEBUG_L2H);
+    }
+    $content =~ s/$src/$dest/g;
+  }
+  $l2h_cache{$l2h_to_latex[$count]} = $content;
+  return $content;
+}
+
+
+#+++############################################################################
+#                                                                              #
+# Pass 1: read source, handle command, variable, simple substitution           #
+#                                                                              #
+#---############################################################################
+
+@lines = ();				# whole document
+@toc_lines = ();			# table of contents
+@stoc_lines = ();			# table of contents
+$curlevel = 0;				# current level in TOC
+$node = '';				# current node name
+$node_next = '';                        # current node next name               
+$node_prev = '';                        # current node prev name
+$node_up = '';                          # current node up name
+$in_table = 0;				# am I inside a table
+$table_type = '';			# type of table ('', 'f', 'v', 'multi')
+@tables = ();			        # nested table support
+$in_bibliography = 0;			# am I inside a bibliography
+$in_glossary = 0;			# am I inside a glossary
+$in_top = 0;				# am I inside the top node
+$has_top = 0;				# did I see a top node?
+$has_top_command = 0;			# did I see @top for automatic pointers?
+$in_pre = 0;				# am I inside a preformatted section
+$in_list = 0;				# am I inside a list
+$in_html = 0;				# am I inside an HTML section
+$first_line = 1;		        # is it the first line
+$dont_html = 0;				# don't protect HTML on this line
+$deferred_ref = '';			# deferred reference for indexes
+@html_stack = ();			# HTML elements stack
+$html_element = '';			# current HTML element
+&html_reset;
+%macros = ();                           # macros
+
+# init l2h
+$T2H_L2H = &l2h_Init($docu_name) if ($T2H_L2H);
+$T2H_L2H = &l2h_InitToLatex      if ($T2H_L2H);    
+
+# build code for simple substitutions
+# the maps used (%simple_map and %things_map) MUST be aware of this
+# watch out for regexps, / and escaped characters!
+$subst_code = '';
+foreach (keys(%simple_map)) {
+    ($re = $_) =~ s/(\W)/\\$1/g; # protect regexp chars
+    $subst_code .= "s/\\\@$re/$simple_map{$_}/g;\n";
+}
+foreach (keys(%things_map)) {
+    $subst_code .= "s/\\\@$_\\{\\}/$things_map{$_}/g;\n";
+}
+if ($use_acc) {
+    # accentuated characters
+    foreach (keys(%accent_map)) {
+	if ($_ eq "`") {
+	    $subst_code .= "s/$;3";
+	} elsif ($_ eq "'") {
+	    $subst_code .= "s/$;4";
+	} else {
+	    $subst_code .= "s/\\\@\\$_";
+	}
+	$subst_code .= "([a-z])/&\${1}$accent_map{$_};/gi;\n";
+    }
+}
+eval("sub simple_substitutions { $subst_code }");
+
+&init_input;
+INPUT_LINE: while ($_ = &next_line) {
+    #
+    # remove \input on the first lines only
+    #
+    if ($first_line) {
+	next if /^\\input/;
+	$first_line = 0;
+    }
+    # non-@ substitutions cf. texinfmt.el
+    #
+    # parse texinfo tags
+    #
+    $tag = '';
+    $end_tag = '';
+    if (/^\s*\@end\s+(\w+)\b/) {
+	$end_tag = $1;
+    } elsif (/^\s*\@(\w+)\b/) {
+	$tag = $1;
+    }
+    #
+    # handle @html / @end html
+    #
+    if ($in_html) {
+	if ($end_tag eq 'html') {
+	    $in_html = 0;
+	} else {
+	    $tag2pro{$in_html} .= $_;
+	}
+	next;
+    } elsif ($tag eq 'html') {
+	$in_html = $PROTECTTAG . ++$html_num;
+	push(@lines, $in_html);
+	next;
+    }
+
+    #
+    # try to remove inlined comments
+    # syntax from tex-mode.el comment-start-skip
+    #
+    s/((^|[^\@])(\@\@)*)\@c(omment | |\{|$).*/$1/;
+
+# Sometimes I use @c right at the end of  a line ( to suppress the line feed )
+#    s/((^|[^\@])(\@\@)*)\@c(omment)?$/$1/;
+#     s/((^|[^\@])(\@\@)*)\@c(omment)? .*/$1/;
+#     s/(.*)\@c{.*?}(.*)/$1$2/;
+#     s/(.*)\@comment{.*?}(.*)/$1$2/;
+#     s/^(.*)\@c /$1/;
+#     s/^(.*)\@comment /$1/;
+
+    #############################################################
+    # value substitution before macro expansion, so that
+    # it works in macro arguments			    
+    s/\@value{($VARRE)}/$value{$1}/eg;
+			    
+    #############################################################
+    # macro substitution
+    while (/\@(\w+)/g)
+    {
+      if (exists($macros->{$1}))    
+      {
+	my $before = $`;
+	my $name = $1;
+	my $after = $';
+	my @args;
+	my $args;
+	if ($after =~ /^\s*{(.*?[^\\])}(.*)/)  
+	{
+	  $args = $1;
+	  $after = $2;
+	}
+	elsif (@{$macros->{$name}->{Args}} == 1)
+	{
+	  $args = $after;
+	  $args =~ s/^\s*//;
+	  $args =~ s/\s*$//;
+	  $after = '';
+	}
+	$args =~ s|\\\\|\\|g;
+	$args =~ s|\\{|{|g;
+        $args =~ s|\\}|}|g;
+	if (@{$macros->{$name}->{Args}} > 1)
+	{
+	  $args =~ s/(^|[^\\]),/$1$;/g ;
+	  $args =~ s|\\,|,|g;
+	  @args = split(/$;\s*/, $args) if (@{$macros->{$name}->{Args}} > 1);
+	}
+	else
+	{
+	  $args =~ s|\\,|,|g;
+	  @args = ($args);
+	}
+	my $macrobody = $macros->{$name}->{Body};
+	for ($i=0; $i<=$#args; $i++)
+	{
+	  $macrobody =~ s|\\$macros->{$name}->{Args}->[$i]\\|$args[$i]|g;
+	}
+	$macrobody =~ s|\\\\|\\|g;
+	$_ = $before . $macrobody . $after;
+	unshift @input_spool, map {$_ = $_."\n"} split(/\n/, $_);
+	next INPUT_LINE;
+      }
+    }				#
+			    
+    
+    #
+    # try to skip the line
+    #
+    if ($end_tag) {
+        $in_titlepage = 0 if $end_tag eq 'titlepage';
+	next if $to_skip{"end $end_tag"};
+    } elsif ($tag) {
+      $in_titlepage = 1 if $tag eq 'titlepage';
+      next if $to_skip{$tag};
+      last if $tag eq 'bye';
+    }
+    if ($in_top) {
+	# parsing the top node
+	if ($tag eq 'node' || 
+	    ($sec2level{$tag} && $tag !~ /unnumbered/ && $tag !~ /heading/))
+	{
+	    # no more in top
+	    $in_top = 0;
+	    push(@lines, $TOPEND);
+	}
+    }
+    unless ($in_pre) {
+	s/``/\"/g;
+	s/''/\"/g;
+	s/([\w ])---([\w ])/$1--$2/g;
+    }
+    #
+    # analyze the tag
+    #
+    if ($tag) {
+	# skip lines
+	&skip_until($tag), next if $tag eq 'ignore';
+	&skip_until($tag), next if $tag eq 'ifnothtml';
+	if ($tag eq 'ifinfo')
+	{
+	  &skip_until($tag), next unless $T2H_EXPAND eq 'info';
+	}
+	if ($tag eq 'iftex')
+	{
+	  &skip_until($tag), next unless $T2H_EXPAND eq 'tex';
+	} 
+	if ($tag eq 'tex')
+	{
+	  # add to latex2html file
+	  if ($T2H_EXPAND eq 'tex' && $T2H_L2H && ! $in_pre)
+	  {
+	    # add space to the end -- tex(i2dvi) does this, as well 
+	    push(@lines, &l2h_ToLatex(&string_until($tag) . " "));
+	  }
+	  else
+	  {
+	    &skip_until($tag);
+	  }
+	  next;
+	}
+	if ($tag eq 'titlepage')
+	{
+	  next;
+	}
+	# handle special tables
+	if ($tag =~ /^(|f|v|multi)table$/) {
+	    $table_type = $1;
+	    $tag = 'table';
+	}
+	# special cases
+	if ($tag eq 'top' || ($tag eq 'node' && /^\@node\s+top\s*,/i)) {
+	    $in_top = 1;
+	    $has_top = 1;
+	    $has_top_command = 1 if $tag eq 'top';
+	    @lines = (); # ignore all lines before top (title page garbage)
+	    next;
+	} elsif ($tag eq 'node') {
+	  if ($in_top)
+	  {
+	    $in_top = 0;
+	    push(@lines, $TOPEND);
+	  }
+	  warn "$ERROR Bad node line: $_" unless $_ =~ /^\@node\s$NODESRE$/o;
+	  # request of "Richard Y. Kim" <ryk@ap.com>
+	  s/^\@node\s+//;
+	  $_ = &protect_html($_); # if node contains '&' for instance
+	  ($node, $node_next, $node_prev, $node_up) = split(/,/);
+	  &normalise_node($node);
+	  &normalise_node($node_next);
+	  &normalise_node($node_prev);
+	  &normalise_node($node_up);
+	  $node =~ /\"/ ?
+	    push @lines, &html_debug("<A NAME='$node'></A>\n", __LINE__) :
+	    push @lines, &html_debug("<A NAME=\"$node\"></A>\n", __LINE__);
+	  next;
+	} elsif ($tag eq 'include') {
+	    if (/^\@include\s+($FILERE)\s*$/o) {
+		$file = LocateIncludeFile($1);
+		if ($file && -e $file) {
+		    &open($file);
+		    print "# including $file\n" if $T2H_VERBOSE;
+		} else {
+		    warn "$ERROR Can't find $1, skipping";
+		}
+	    } else {
+		warn "$ERROR Bad include line: $_";
+	    }
+	    next;
+	} elsif ($tag eq 'ifclear') {
+	    if (/^\@ifclear\s+($VARRE)\s*$/o) {
+		next unless defined($value{$1});
+		&skip_until($tag);
+	    } else {
+		warn "$ERROR Bad ifclear line: $_";
+	    }
+	    next;
+	} elsif ($tag eq 'ifset') {
+	    if (/^\@ifset\s+($VARRE)\s*$/o) {
+		next if defined($value{$1});
+		&skip_until($tag);
+	    } else {
+		warn "$ERROR Bad ifset line: $_";
+	    }
+	    next;
+	} elsif ($tag eq 'menu') {
+	    unless ($T2H_SHOW_MENU) {
+		&skip_until($tag);
+		next;
+	    }
+	    &html_push_if($tag);
+	    push(@lines, &html_debug('', __LINE__));
+	} elsif ($format_map{$tag}) {
+	    $in_pre = 1 if $format_map{$tag} eq 'PRE';
+	    &html_push_if($format_map{$tag});
+	    push(@lines, &html_debug('', __LINE__));
+	    $in_list++ if $format_map{$tag} eq 'UL' || $format_map{$tag} eq 'OL' ;
+#	    push(@lines, &debug("<BLOCKQUOTE>\n", __LINE__))
+#	      if $tag =~ /example/i;
+	    # sunshine@sunshineco.com: <PRE>bla</PRE> looks better than
+	    # <PRE>\nbla</PRE> (at least on NeXTstep browser
+	    push(@lines, &debug("<$format_map{$tag}>" . 
+				($in_pre ? '' : "\n"), __LINE__));
+	    next;
+	}
+	elsif (exists $complex_format_map->{$tag})
+	{
+	  my $start = eval $complex_format_map->{$tag}->[0];
+	  if ($@)
+	  {
+	    print "$ERROR: eval of complex_format_map->{$tag}->[0] $complex_format_map->{$tag}->[0]: $@";
+	    $start = '<pre>'
+	  }
+	  $in_pre = 1 if $start =~ /<pre/;
+	  push(@lines, html_debug($start. ($in_pre ? '' : "\n"), __LINE__));
+	  next;
+	} elsif ($tag eq 'table') {
+	  # anorland@hem2.passagen.se
+	  # if (/^\s*\@(|f|v|multi)table\s+\@(\w+)/) {
+	     if (/^\s*\@(|f|v|multi)table\s+\@(\w+)|(\{[^\}]*\})/) {
+		$in_table = $2;
+		unshift(@tables, join($;, $table_type, $in_table));
+		if ($table_type eq "multi") {
+		    # don't use borders -- gets confused by empty cells
+		    push(@lines, &debug("<TABLE>\n", __LINE__));
+		    &html_push_if('TABLE');
+		} else {
+		    push(@lines, &debug("<DL COMPACT>\n", __LINE__));
+		    &html_push_if('DL');
+		}
+		push(@lines, &html_debug('', __LINE__));
+	    } else {
+		warn "$ERROR Bad table line: $_";
+	    }
+	    next;
+	} 
+	elsif ($tag eq 'synindex' || $tag eq 'syncodeindex') 
+	{
+	  if (/^\@$tag\s+(\w+)\s+(\w+)\s*$/) 
+	  {
+	    my $from = $1;
+	    my $to = $2;
+	    my $prefix_from = IndexName2Prefix($from);
+	    my $prefix_to = IndexName2Prefix($to);
+
+	    warn("$ERROR unknown from index name $from ind syn*index line: $_"), next
+	      unless $prefix_from;
+	    warn("$ERROR unknown to index name $to ind syn*index line: $_"), next
+	      unless $prefix_to;
+
+	    if ($tag eq 'syncodeindex')
+	    {
+	      $index_properties->{$prefix_to}->{'from_code'}->{$prefix_from} = 1;
+	    }
+	    else
+	    {
+	       $index_properties->{$prefix_to}->{'from'}->{$prefix_from} = 1;
+	    }
+	  } 
+	  else 
+	  {
+	    warn "$ERROR Bad syn*index line: $_";
+	  }
+	  next;
+	} 
+	elsif ($tag eq 'defindex' || $tag eq 'defcodeindex') 
+	{
+	  if (/^\@$tag\s+(\w+)\s*$/) 
+	  {
+	    my $name = $1;
+	    $index_properties->{$name}->{name} = $name;
+	    $index_properties->{$name}->{code} = 1 if $tag eq 'defcodeindex';
+	  } 
+	  else 
+	  {
+	    warn "$ERROR Bad defindex line: $_";
+	  }
+	  next;
+	}
+	elsif (/^\@printindex/)
+	{
+	  push (@lines, "<!--::${section}::-->$_");
+	  next;
+	}
+	elsif ($tag eq 'sp') {
+	    push(@lines, &debug("<P>\n", __LINE__));
+	    next;
+	} elsif ($tag eq 'center') {
+	    push(@lines, &debug("<center>\n", __LINE__));
+	    s/\@center//;
+	} elsif ($tag eq 'setref') {
+	    &protect_html; # if setref contains '&' for instance
+	    if (/^\@$tag\s*{($NODERE)}\s*$/) {
+		$setref = $1;
+		$setref =~ s/\s+/ /g; # normalize
+		$setref =~ s/ $//;
+		$node2sec{$setref} = $name;
+		$sec2node{$name} = $setref;
+		$node2href{$setref} = "$docu_doc#$docid";
+	    } else {
+		warn "$ERROR Bad setref line: $_";
+	    }
+	    next;
+	} elsif ($tag eq 'lowersections') {
+	    local ($sec, $level);
+	    while (($sec, $level) = each %sec2level) {
+		$sec2level{$sec} = $level + 1;
+	    }
+	    next;
+	} elsif ($tag eq 'raisesections') {
+	    local ($sec, $level);
+	    while (($sec, $level) = each %sec2level) {
+		$sec2level{$sec} = $level - 1;
+	    }
+	    next;
+	}
+	elsif ($tag eq 'macro' || $tag eq 'rmacro')
+	{
+	  if (/^\@$tag\s*(\w+)\s*(.*)/)
+	  {
+	    my $name = $1;
+	    my @args;
+	    @args = split(/\s*,\s*/ , $1)
+	      if ($2 =~ /^\s*{(.*)}\s*/);
+	    
+	    $macros->{$name}->{Args} = \@args;
+	    $macros->{$name}->{Body} = '';
+	    while (($_ = &next_line) && $_ !~ /\@end $tag/)
+	    {
+	      $macros->{$name}->{Body} .= $_;
+	    }
+	    die "ERROR: No closing '\@end $tag' found for macro definition of '$name'\n"
+	      unless (/\@end $tag/);
+	    chomp $macros->{$name}->{Body};
+	  }
+	  else
+	  {
+	    warn "$ERROR: Bad macro defintion $_"
+	  }
+	  next;
+	}
+	elsif ($tag eq 'unmacro')
+	{
+	  delete $macros->{$1} if (/^\@unmacro\s*(\w+)/);
+	  next;
+	}
+	elsif ($tag eq 'documentlanguage')
+	{
+	  SetDocumentLanguage($1) if (!$T2H_LANG && /documentlanguage\s*(\w+)/);
+	}
+	elsif (defined($def_map{$tag})) {
+	    if ($def_map{$tag}) {
+		s/^\@$tag\s+//;
+		$tag = $def_map{$tag};
+		$_ = "\@$tag $_";
+		$tag =~ s/\s.*//;
+	    }
+	} elsif (defined($user_sub{$tag})) {
+	    s/^\@$tag\s+//;
+	    $sub = $user_sub{$tag};
+	    print "# user $tag = $sub, arg: $_" if $T2H_DEBUG & $DEBUG_USER;
+	    if (defined(&$sub)) {
+		chop($_);
+		&$sub($_);
+	    } else {
+		warn "$ERROR Bad user sub for $tag: $sub\n";
+	    }
+	    next;
+	  } 
+	if (defined($def_map{$tag})) {
+	    s/^\@$tag\s+//;
+	    if ($tag =~ /x$/) {
+		# extra definition line
+		$tag = $`;
+		$is_extra = 1;
+	    } else {
+		$is_extra = 0;
+	    }
+	    while (/\{([^\{\}]*)\}/) {
+		# this is a {} construct
+		($before, $contents, $after) = ($`, $1, $');
+		# protect spaces
+		$contents =~ s/\s+/$;9/g;
+		# restore $_ protecting {}
+		$_ = "$before$;7$contents$;8$after";
+	    }
+	    @args = split(/\s+/, &protect_html($_));
+	    foreach (@args) {
+		s/$;9/ /g;	# unprotect spaces
+		s/$;7/\{/g;	# ... {
+		s/$;8/\}/g;	# ... }
+	    }
+	    $type = shift(@args);
+	    $type =~ s/^\{(.*)\}$/$1/;
+	    print "# def ($tag): {$type} ", join(', ', @args), "\n"
+		if $T2H_DEBUG & $DEBUG_DEF;
+	    $type .= ':'; # it's nicer like this
+	    my $name = shift(@args);
+	    $name =~ s/^\{(.*)\}$/$1/;
+	    if ($is_extra) {
+		$_ = &debug("<DT>", __LINE__);
+	    } else {
+		$_ = &debug("<DL>\n<DT>", __LINE__);
+	    }
+	    if ($tag eq 'deffn' || $tag eq 'defvr' || $tag eq 'deftp') {
+		$_ .= "<U>$type</U> <B>$name</B>";
+		$_ .= " <I>@args</I>" if @args;
+	    } elsif ($tag eq 'deftypefn' || $tag eq 'deftypevr'
+		     || $tag eq 'defcv' || $tag eq 'defop') {
+		$ftype = $name;
+		$name = shift(@args);
+		$name =~ s/^\{(.*)\}$/$1/;
+		$_ .= "<U>$type</U> $ftype <B>$name</B>";
+		$_ .= " <I>@args</I>" if @args;
+	    } else {
+		warn "$ERROR Unknown definition type: $tag\n";
+		$_ .= "<U>$type</U> <B>$name</B>";
+		$_ .= " <I>@args</I>" if @args;
+	    }
+ 	    $_ .= &debug("\n<DD>", __LINE__);
+	    $name = &unprotect_html($name);
+	    if ($tag eq 'deffn' || $tag eq 'deftypefn') {
+	      EnterIndexEntry('f', $name, $docu_doc, $section, \@lines);
+#		unshift(@input_spool, "\@findex $name\n");
+	    } elsif ($tag eq 'defop') {
+	      EnterIndexEntry('f', "$name on $ftype", $docu_doc, $section, \@lines);
+#		unshift(@input_spool, "\@findex $name on $ftype\n");
+	    } elsif ($tag eq 'defvr' || $tag eq 'deftypevr' || $tag eq 'defcv') {
+	      EnterIndexEntry('v', $name, $docu_doc, $section, \@lines);
+#		unshift(@input_spool, "\@vindex $name\n");
+	    } else {
+	      EnterIndexEntry('t', $name, $docu_doc, $section, \@lines);
+#		unshift(@input_spool, "\@tindex $name\n");
+	    }
+	    $dont_html = 1;
+	}
+    } elsif ($end_tag) {
+	if ($format_map{$end_tag}) {
+	    $in_pre = 0 if $format_map{$end_tag} eq 'PRE';
+	    $in_list-- if $format_map{$end_tag} eq 'UL' || $format_map{$end_tag} eq 'OL' ;
+	    &html_pop_if('P');
+	    &html_pop_if('LI');
+	    &html_pop_if();
+	    push(@lines, &debug("</$format_map{$end_tag}>\n", __LINE__));
+	    push(@lines, &html_debug('', __LINE__));
+	}
+	elsif (exists $complex_format_map->{$end_tag})
+	{
+	  my $end = eval $complex_format_map->{$end_tag}->[1];
+	  if ($@)
+	  {
+	    print "$ERROR: eval of complex_format_map->{$end_tag}->[1] $complex_format_map->{$end_tag}->[0]: $@";
+	    $end = '</pre>'
+	  }
+	  $in_pre = 0 if $end =~ m|</pre>|;
+	  push(@lines, html_debug($end, __LINE__));
+	} elsif ($end_tag =~ /^(|f|v|multi)table$/) {
+	    unless (@tables) {
+		warn "$ERROR \@end $end_tag without \@*table\n";
+		next;
+	    }
+	    &html_pop_if('P');
+	    ($table_type, $in_table) = split($;, shift(@tables));
+	    unless ($1 eq $table_type) {
+		warn "$ERROR \@end $end_tag without matching \@$end_tag\n";
+		next;
+	    }
+	    if ($table_type eq "multi") {
+		push(@lines, "</TR></TABLE>\n");
+		&html_pop_if('TR');
+	    } else {
+		push(@lines, "</DL>\n");
+		&html_pop_if('DD');
+	    }
+	    &html_pop_if();
+	    if (@tables) {
+		($table_type, $in_table) = split($;, $tables[0]);
+	    } else {
+		$in_table = 0;
+	    }
+	} elsif (defined($def_map{$end_tag})) {
+ 	    push(@lines, &debug("</DL>\n", __LINE__));
+	} elsif ($end_tag eq 'menu') {
+	    &html_pop_if();
+	    push(@lines, $_); # must keep it for pass 2
+	} 
+	next;
+    }
+    #############################################################
+    # anchor insertion
+    while (/\@anchor\s*\{(.*?)\}/)
+    {
+      $_ = $`.$';
+      my $anchor = $1;
+      $anchor = &normalise_node($anchor);
+      push @lines, &html_debug("<A NAME=\"$anchor\"></A>\n");
+      $node2href{$anchor} = "$docu_doc#$anchor";
+      next INPUT_LINE if $_ =~ /^\s*$/;
+    }
+
+    #############################################################
+    # index entry generation, after value substitutions
+    if (/^\@(\w+?)index\s+/)
+    {
+      EnterIndexEntry($1, $', $docu_doc, $section, \@lines);
+      next;
+    }
+    #
+    # protect texi and HTML things
+    &protect_texi;
+    $_ = &protect_html($_) unless $dont_html;
+    $dont_html = 0;
+    # substitution (unsupported things)
+    s/^\@exdent\s+//g;
+    s/\@noindent\s+//g;
+    s/\@refill\s+//g;
+    # other substitutions
+    &simple_substitutions;
+    s/\@footnote\{/\@footnote$docu_doc\{/g; # mark footnotes, cf. pass 4
+    #
+    # analyze the tag again
+    #
+    if ($tag) {
+      if (defined($sec2level{$tag}) && $sec2level{$tag} > 0) {
+	    if (/^\@$tag\s+(.+)$/) {
+		$name = $1;
+		$name = &normalise_node($name);
+		$level = $sec2level{$tag};
+		# check for index
+		$first_index_chapter = $node
+		  if ($level == 1 && !$first_index_chapter && 
+		      $name =~ /index/i);
+		if ($in_top && /heading/){
+		    $T2H_HAS_TOP_HEADING = 1;
+                    $_ = &debug("<H$level>$name</H$level>\n", __LINE__);
+		    &html_push_if('body');
+		    print "# top heading, section $name, level $level\n"
+			if $T2H_DEBUG & $DEBUG_TOC;
+		}
+		else
+		{
+		  unless (/^\@\w*heading/)
+		  {
+		    unless (/^\@unnumbered/)
+		    {
+		      my $number = &update_sec_num($tag, $level);
+		      $name = $number. ' ' . $name if $T2H_NUMBER_SECTIONS;
+		      $sec2number{$name} = $number;
+		      $number2sec{$number} = $name;
+		    }
+		    if (defined($toplevel))
+		    {
+		      push @lines, ($level==$toplevel ? $CHAPTEREND : $SECTIONEND);
+		    }
+		    else
+		    {
+		      # first time we see a "section"
+		      unless ($level == 1) 
+		      {
+			warn "$WARN The first section found is not of level 1: $_";
+		      }
+		      $toplevel = $level;
+		    }
+		    push(@sections, $name);
+		    next_doc() if ($T2H_SPLIT eq 'section' ||
+				   $T2H_SPLIT && $level == $toplevel);
+		  }
+		  $sec_num++;
+		  $docid = "SEC$sec_num";
+		  $tocid = (/^\@\w*heading/ ? undef : "TOC$sec_num");
+		  # check biblio and glossary
+		  $in_bibliography = ($name =~ /^([A-Z]|\d+)?(\.\d+)*\s*bibliography$/i);
+		  $in_glossary = ($name =~ /^([A-Z]|\d+)?(\.\d+)*\s*glossary$/i);
+		  # check node
+		  if ($node)
+		  {
+		    warn "$ERROR Duplicate node found: $node\n"
+		      if ($node2sec{$node});
+		  }
+		  else
+		  {
+		    $name .= ' ' while ($node2sec{$name});
+		    $node = $name;
+		  }
+		  $name .= ' ' while ($sec2node{$name});
+		  $section = $name; 
+		  $node2sec{$node} = $name;
+		  $sec2node{$name} = $node;
+		  $node2href{$node} = "$docu_doc#$docid";
+		  $node2next{$node} = $node_next;
+		  $node2prev{$node} = $node_prev;
+		  $node2up{$node} = $node_up;
+		  print "# node $node, section $name, level $level\n"
+		    if $T2H_DEBUG & $DEBUG_TOC;
+
+		  $node = '';
+		  $node_next = '';
+		  $node_prev = '';
+		  $node_next = '';
+		  if ($tocid)
+		  {
+		    # update TOC
+		    while ($level > $curlevel) {
+		      $curlevel++;
+		      push(@toc_lines, "<UL>\n");
+		    }
+		    while ($level < $curlevel) {
+		      $curlevel--;
+		      push(@toc_lines, "</UL>\n");
+		    }
+		    $_ = &t2h_anchor($tocid, "$docu_doc#$docid", $name, 1);
+		    $_ = &substitute_style($_);
+		    push(@stoc_lines, "$_<BR>\n") if ($level == 1);
+		    if ($T2H_NUMBER_SECTIONS)
+		    {
+		      push(@toc_lines, $_ . "<BR>\n")
+		    }
+		    else
+		    {
+		      push(@toc_lines, "<LI>" . $_ ."</LI>");
+		    }
+		  }
+		  else
+		  {
+		    push(@lines, &html_debug("<A NAME=\"$docid\"></A>\n", 
+					   __LINE__));
+		  }
+		  # update DOC
+		  push(@lines, &html_debug('', __LINE__));
+		  &html_reset;
+		  $_ =  "<H$level> $name </H$level>\n<!--docid::${docid}::-->\n";
+		  $_ = &debug($_, __LINE__);
+		  push(@lines, &html_debug('', __LINE__));
+		}
+		# update DOC
+		foreach $line (split(/\n+/, $_)) {
+		    push(@lines, "$line\n");
+		}
+		next;
+	    } else {
+		warn "$ERROR Bad section line: $_";
+	    }
+	} else {
+	    # track variables
+	    $value{$1} = Unprotect_texi($2), next if /^\@set\s+($VARRE)\s+(.*)$/o;
+	    delete $value{$1}, next if /^\@clear\s+($VARRE)\s*$/o;
+	    # store things
+	    $value{'_shorttitle'} = Unprotect_texi($1), next if /^\@shorttitle\s+(.*)$/;
+	    $value{'_setfilename'}   = Unprotect_texi($1), next if /^\@setfilename\s+(.*)$/;
+	    $value{'_settitle'}      = Unprotect_texi($1), next if /^\@settitle\s+(.*)$/;
+	    $value{'_author'}   .= Unprotect_texi($1)."\n", next if /^\@author\s+(.*)$/;
+	    $value{'_subtitle'} .= Unprotect_texi($1)."\n", next if /^\@subtitle\s+(.*)$/;
+	    $value{'_title'}    .= Unprotect_texi($1)."\n", next if /^\@title\s+(.*)$/;
+
+	    # list item
+	    if (/^\s*\@itemx?\s+/) {
+		$what = $';
+		$what =~ s/\s+$//;
+		if ($in_bibliography && $use_bibliography) {
+		    if ($what =~ /^$BIBRE$/o) {
+			$id = 'BIB' . ++$bib_num;
+			$bib2href{$what} = "$docu_doc#$id";
+			print "# found bibliography for '$what' id $id\n"
+			    if $T2H_DEBUG & $DEBUG_BIB;
+			$what = &t2h_anchor($id, '', $what);
+		    }
+		} elsif ($in_glossary && $T2H_USE_GLOSSARY) {
+		    $id = 'GLOSS' . ++$gloss_num;
+		    $entry = $what;
+		    $entry =~ tr/A-Z/a-z/ unless $entry =~ /^[A-Z\s]+$/;
+		    $gloss2href{$entry} = "$docu_doc#$id";
+		    print "# found glossary for '$entry' id $id\n"
+			if $T2H_DEBUG & $DEBUG_GLOSS;
+		    $what = &t2h_anchor($id, '', $what);
+		}
+		elsif ($in_table && ($table_type eq 'f' || $table_type eq 'v'))
+		{
+		  EnterIndexEntry($table_type, $what, $docu_doc, $section, \@lines);
+		}
+		&html_pop_if('P');
+		if ($html_element eq 'DL' || $html_element eq 'DD') {
+		    if ($things_map{$in_table} && !$what) {
+			# special case to allow @table @bullet for instance
+			push(@lines, &debug("<DT>$things_map{$in_table}\n", __LINE__));
+		    } else {
+			push(@lines, &debug("<DT>\@$in_table\{$what\}\n", __LINE__));
+		    }
+		    push(@lines, "<DD>");
+		    &html_push('DD') unless $html_element eq 'DD';
+		    if ($table_type) { # add also an index
+			unshift(@input_spool, "\@${table_type}index $what\n");
+		    }
+		} elsif ($html_element eq 'TABLE') {
+		    push(@lines, &debug("<TR><TD>$what</TD>\n", __LINE__));
+		    &html_push('TR');
+		} elsif ($html_element eq 'TR') {
+		    push(@lines, &debug("</TR>\n", __LINE__));
+		    push(@lines, &debug("<TR><TD>$what</TD>\n", __LINE__));
+		} else {
+		    push(@lines, &debug("<LI>$what\n", __LINE__));
+		    &html_push('LI') unless $html_element eq 'LI';
+		}
+		push(@lines, &html_debug('', __LINE__));
+		if ($deferred_ref) {
+		    push(@lines, &debug("$deferred_ref\n", __LINE__));
+		    $deferred_ref = '';
+		}
+		next;
+	    } elsif (/^\@tab\s+(.*)$/) {
+		push(@lines, "<TD>$1</TD>\n");
+		next;
+	    }
+	}
+    }
+    # paragraph separator
+    if ($_ eq "\n" && ! $in_pre) {
+	next if $#lines >= 0 && $lines[$#lines] eq "\n";
+	if ($html_element eq 'P') {
+	    push (@lines, &debug("</P><P>\n", __LINE__));
+	}
+# 	else
+# 	{
+# 	  push(@lines, "<P></P>\n");
+# 	  $_ = &debug("<P></P>\n", __LINE__);
+# 	}
+        elsif ($html_element eq 'body' || $html_element eq 'BLOCKQUOTE' || $html_element eq 'DD' || $html_element eq 'LI') 
+	{
+	  &html_push('P');
+	  push(@lines, &debug("<P>\n", __LINE__));
+	}
+      }
+    # otherwise
+    push(@lines, $_) unless $in_titlepage;
+    push(@lines, &debug("</center>\n", __LINE__))  if ($tag eq 'center');
+}
+
+# finish TOC
+$level = 0;
+while ($level < $curlevel) {
+    $curlevel--;
+    push(@toc_lines, "</UL>\n");
+}
+
+print "# end of pass 1\n" if $T2H_VERBOSE;
+
+SetDocumentLanguage('en') unless ($T2H_LANG);
+#+++############################################################################
+#                                                                              #
+# Stuff related to Index generation                                            #
+#                                                                              #
+#---############################################################################
+
+sub EnterIndexEntry
+{
+  my $prefix = shift;
+  my $key = shift;
+  my $docu_doc = shift;
+  my $section = shift;
+  my $lines = shift;
+  local $_;
+
+  warn "$ERROR Undefined index command: $_", next
+    unless (exists ($index_properties->{$prefix}));
+  $key =~ s/\s+$//;
+  $_ = $key;
+  &protect_texi;
+  $key = $_;
+  $_ = &protect_html($_);
+  my $html_key = substitute_style($_);
+  my $id;
+  $key = remove_style($key);
+  $key = remove_things($key);
+  $_ = $key;
+  &unprotect_texi;
+  $key = $_;
+  while (exists $index->{$prefix}->{$key}) {$key .= ' '};
+  if ($lines->[$#lines] =~ /^<!--docid::(.+)::-->$/)
+  {
+    $id = $1;
+  }
+  else
+  {
+    $id = 'IDX' . ++$idx_num;
+    push(@$lines, &t2h_anchor($id, '', $T2H_INVISIBLE_MARK, !$in_pre));
+  }
+  $index->{$prefix}->{$key}->{html_key} = $html_key;
+  $index->{$prefix}->{$key}->{section} = $section;
+  $index->{$prefix}->{$key}->{href} = "$docu_doc#$id";
+  print "# found ${prefix}index  for '$key' with id $id\n"
+    if $T2H_DEBUG & $DEBUG_INDEX;
+}
+
+sub IndexName2Prefix
+{
+  my $name = shift;
+  my $prefix;
+
+  for $prefix (keys %$index_properties)
+  {
+    return $prefix if ($index_properties->{$prefix}->{name} eq $name);
+  }
+  return undef;
+}
+
+sub GetIndexEntries
+{
+  my $normal = shift;
+  my $code = shift;
+  my ($entries, $prefix, $key) = ({});
+  
+  for $prefix (keys %$normal)
+  {
+    for $key (keys %{$index->{$prefix}})
+    {
+      $entries->{$key} = {%{$index->{$prefix}->{$key}}};
+    }
+  }
+
+  if (defined($code))
+  {
+    for $prefix (keys %$code)
+    {
+      unless (exists $normal->{$keys})
+      {
+	for $key (keys %{$index->{$prefix}})
+	{
+	  $entries->{$key} = {%{$index->{$prefix}->{$key}}};
+	  $entries->{$key}->{html_key} = "<CODE>$entries->{$key}->{html_key}</CODE>";
+	}
+      }
+    }
+  }
+  return $entries;
+}
+
+sub byAlpha
+{
+  if ($a =~ /^[A-Za-z]/)
+  {
+    if ($b =~ /^[A-Za-z]/)
+    {
+      return lc($a) cmp lc($b);
+    }
+    else
+    {
+      return 1;
+    }
+  }
+  elsif ($b =~ /^[A-Za-z]/)
+  {
+    return -1;
+  }
+  else
+  {
+    return lc($a) cmp lc($b);
+  } 
+}
+
+sub GetIndexPages
+{
+  my $entries = shift;
+  my (@Letters, $key);
+  my ($EntriesByLetter, $Pages, $page) = ({}, [], {});
+  my @keys = sort byAlpha keys %$entries;
+
+  for $key (@keys)
+  {
+    push @{$EntriesByLetter->{uc(substr($key,0, 1))}} , $entries->{$key};
+  }
+  @Letters = sort byAlpha keys %$EntriesByLetter;
+  
+  $T2H_SPLIT_INDEX = 0 unless ($T2H_SPLIT);
+
+  unless ($T2H_SPLIT_INDEX)
+  {
+    $page->{First} = $Letters[0];
+    $page->{Last} = $Letters[$#Letters];
+    $page->{Letters} = \@Letters;
+    $page->{EntriesByLetter} = $EntriesByLetter;
+    push @$Pages, $page;
+    return $Pages;
+  }
+
+  if ($T2H_SPLIT_INDEX =~ /^\d+$/)
+  {
+    my $i = 0;
+    my ($prev_letter, $letter);
+    $page->{First} = $Letters[0];
+    for $letter (@Letters)
+    {
+      if ($i > $T2H_SPLIT_INDEX)
+      {
+	$page->{Last} = $prev_letter;
+	push @$Pages, {%$page};
+	$page->{Letters} = [];
+	$page->{EntriesByLetter} = {};
+	$page->{First} = $letter;
+	$i=0;
+      }
+      push @{$page->{Letters}}, $letter;
+      $page->{EntriesByLetter}->{$letter} = [@{$EntriesByLetter->{$letter}}];
+      $i += scalar(@{$EntriesByLetter->{$letter}});
+      $prev_letter = $letter;
+    }
+    $page->{Last} = $Letters[$#Letters];
+    push @$Pages, {%$page};
+  }
+  return $Pages;
+}
+
+sub GetIndexSummary
+{
+  my $first_page = shift;
+  my $Pages = shift;
+  my $name = shift;
+  my ($page, $letter, $summary, $i, $l1, $l2, $l);
+
+  $i = 0;
+  $summary = '<table><tr><th valign=top>Jump to: &nbsp; </th><td>';
+  
+  for $page ($first_page, @$Pages)
+  {
+    for $letter (@{$page->{Letters}})
+    {
+      $l = t2h_anchor('', "$page->{href}#${name}_$letter", "<b>$letter</b>", 
+		      0, 'style="text-decoration:none"') . "\n &nbsp; \n";
+      
+      if ($letter =~ /^[A-Za-z]/)
+      {
+	$l2 .= $l;
+      }
+      else
+      {
+	$l1 .= $l;
+      }
+    }
+  }
+  $summary .= $l1 . "<BR>\n" if ($l1);
+  $summary .= $l2 . '</td></tr></table><br>';
+  return $summary;
+}
+
+sub PrintIndexPage
+{
+  my $lines = shift;
+  my $summary = shift;
+  my $page = shift;
+  my $name = shift;
+
+  push @$lines, $summary;
+
+  push @$lines , <<EOT;
+<P></P>
+<TABLE border=0>
+<TR><TD></TD><TH ALIGN=LEFT>Index Entry</TH><TH ALIGN=LEFT> Section</TH></TR>
+<TR><TD COLSPAN=3> <HR></TD></TR>
+EOT
+
+  for $letter (@{$page->{Letters}})
+  {
+    push @$lines, "<TR><TH><A NAME=\"${name}_$letter\"></A>$letter</TH><TD></TD><TD></TD></TR>\n";
+    for $entry (@{$page->{EntriesByLetter}->{$letter}})
+    {
+      push @$lines, 
+      "<TR><TD></TD><TD valign=top>" . 
+	t2h_anchor('', $entry->{href}, $entry->{html_key}) .
+	  "</TD><TD valign=top>" . 
+	    t2h_anchor('', sec_href($entry->{section}), clean_name($entry->{section})) .
+	      "</TD></TR>\n";
+    }
+    push @$lines, "<TR><TD COLSPAN=3> <HR></TD></TR>\n";
+  }
+  push @$lines, "</TABLE><P></P>";
+  push @$lines, $summary;
+}
+
+sub PrintIndex
+{
+  my $lines = shift;
+  my $name = shift;
+  my $section = shift;
+  $section = 'Top' unless $section;
+  my $prefix = IndexName2Prefix($name);
+
+  warn ("$ERROR printindex: bad index name: $name"), return 
+    unless $prefix;
+
+  if ($index_properties->{$prefix}->{code})
+  {
+    $index_properties->{$prefix}->{from_code}->{$prefix} = 1;
+  }
+  else
+  {
+    $index_properties->{$prefix}->{from}->{$prefix}= 1;
+  }
+
+  my $Entries = GetIndexEntries($index_properties->{$prefix}->{from}, 
+				$index_properties->{$prefix}->{from_code});
+  return unless %$Entries;
+
+  if ($T2H_IDX_SUMMARY)
+  {
+    my $key;
+    open(FHIDX, ">$docu_rdir$docu_name" . "_$name.idx")
+      || die "Can't open > $docu_rdir$docu_name" . "_$name.idx for writing: $!\n";
+    print "# writing $name index summary in $docu_rdir$docu_name" . "_$name.idx...\n" if $T2H_VERBOSE;
+
+    for $key (sort keys %$Entries)
+    {
+      print FHIDX "$key\t$Entries->{$key}->{href}\n";
+    }
+  }
+
+  my $Pages = GetIndexPages($Entries);
+  my $page;
+  my $first_page = shift @$Pages;
+  my $sec_name = $section;
+  # remove section number
+  $sec_name =~ s/.*? // if $sec_name =~ /^([A-Z]|\d+)\./;
+
+  ($first_page->{href} = sec_href($section)) =~ s/\#.*$//;
+  # Update tree structure of document
+  if (@$Pages)
+  {
+    my $sec;
+    my @after;
+
+    while (@sections && $sections[$#sections] ne $section)
+    {
+      unshift @after, pop @sections;
+    }
+
+    for $page (@$Pages)
+    {
+      my $node = ($page->{First} ne $page->{Last} ? 
+		  "$sec_name: $page->{First} -- $page->{Last}" :
+		  "$sec_name: $page->{First}");
+      push @sections, $node;
+      $node2sec{$node} = $node;
+      $sec2node{$node} = $node;
+      $node2up{$node} = $section;
+      $page->{href} = next_doc();
+      $page->{name} = $node;
+      $node2href{$node} = $page->{href};
+      if ($prev_node)
+      {
+	$node2next{$prev_node} = $node;
+	$node2prev{$node} = $prev_node;
+      }
+      $prev_node = $node;
+    }
+    push @sections, @after;
+  }
+
+  my $summary = GetIndexSummary($first_page, $Pages, $name);
+  PrintIndexPage($lines, $summary, $first_page, $name);
+  for $page (@$Pages)
+  {
+    push @$lines, ($T2H_SPLIT eq 'chapter' ? $CHAPTEREND : $SECTIONEND);
+    push @$lines, "<H2 ALIGN=\"Left\">$page->{name}</H2>\n";
+    PrintIndexPage($lines, $summary, $page, $name);
+  }
+}
+
+
+#+++############################################################################
+#                                                                              #
+# Pass 2/3: handle style, menu, index, cross-reference                         #
+#                                                                              #
+#---############################################################################
+
+@lines2 = ();				# whole document (2nd pass)
+@lines3 = ();				# whole document (3rd pass)
+$in_menu = 0;				# am I inside a menu
+
+while (@lines) {
+    $_ = shift(@lines);
+    #
+    # special case (protected sections)
+    #
+    if (/^$PROTECTTAG/o) {
+	push(@lines2, $_);
+	next;
+    }
+    #
+    # menu
+    #
+    if (/^\@menu\b/)
+    {
+      $in_menu = 1;
+      $in_menu_listing = 1;
+      push(@lines2, &debug("<BLOCKQUOTE><TABLE BORDER=0 CELLSPACING=0> \n", __LINE__));
+      next;
+    }
+    if (/^\@end\s+menu\b/)
+    {
+      if ($in_menu_listing)
+      {
+	push(@lines2, &debug("</TABLE></BLOCKQUOTE>\n", __LINE__));
+      }
+      else
+      {
+	push(@lines2, &debug("</BLOCKQUOTE>\n", __LINE__));
+      }
+      $in_menu = 0;
+      $in_menu_listing = 0;
+      next;
+    }
+    if ($in_menu) 
+    {
+      my ($node, $name, $descr);
+      if (/^\*\s+($NODERE)::/o)
+      {
+	$node = $1;
+	$descr = $';
+      }
+      elsif (/^\*\s+(.+):\s+([^\t,\.\n]+)[\t,\.\n]/)
+      {
+	$name = $1;
+	$node = $2;
+	$descr = $';
+      }
+      elsif (/^\*/) 
+      {
+	warn "$ERROR Bad menu line: $_";
+      }
+      else
+      {
+	if ($in_menu_listing)
+	{
+	  $in_menu_listing = 0;
+	  push(@lines2, &debug("</TABLE>\n", __LINE__));
+	}
+	# should be like verbatim -- preseve spaces, etc
+	s/ /\&nbsp;/g;
+	$_ .= "<br>\n";
+	push(@lines2, $_);
+      }
+      if ($node)
+      {
+	if (! $in_menu_listing)
+	{
+	  $in_menu_listing = 1;
+	  push(@lines2, &debug("<TABLE BORDER=0 CELLSPACING=0>\n", __LINE__));
+	}
+	# look for continuation
+	while ($lines[0] =~ /^\s+\w+/)
+	{
+	  $descr .= shift(@lines);
+	}
+	&menu_entry($node, $name, $descr);
+      } 
+      next;
+    }
+    #
+    # printindex
+    #
+    PrintIndex(\@lines2, $2, $1), next
+      if (/^<!--::(.*)::-->\@printindex\s+(\w+)/);
+    #
+    # simple style substitutions
+    #
+    $_ = &substitute_style($_);
+    #
+    # xref
+    #
+    while (/\@(x|px|info|)ref{([^{}]+)(}?)/) {
+	# note: Texinfo may accept other characters
+	($type, $nodes, $full) = ($1, $2, $3);
+	($before, $after) = ($`, $');
+	if (! $full && $after) {
+	    warn "$ERROR Bad xref (no ending } on line): $_";
+	    $_ = "$before$;0${type}ref\{$nodes$after";
+	    next; # while xref
+	}
+	if ($type eq 'x') {
+	    $type = "$T2H_WORDS->{$T2H_LANG}->{'See'} ";
+	} elsif ($type eq 'px') {
+	    $type = "$T2H_WORDS->{$T2H_LANG}->{'see'} ";
+	} elsif ($type eq 'info') {
+	    $type = "$T2H_WORDS->{$T2H_LANG}->{'See'} Info";
+	} else {
+	    $type = '';
+	}
+	unless ($full) {
+	    $next = shift(@lines);
+	    $next = &substitute_style($next);
+	    chop($nodes); # remove final newline
+	    if ($next =~ /\}/) { # split on 2 lines
+		$nodes .= " $`";
+		$after = $';
+	    } else {
+		$nodes .= " $next";
+		$next = shift(@lines);
+		$next = &substitute_style($next);
+		chop($nodes);
+		if ($next =~ /\}/) { # split on 3 lines
+		    $nodes .= " $`";
+		    $after = $';
+		} else {
+		    warn "$ERROR Bad xref (no ending }): $_";
+		    $_ = "$before$;0xref\{$nodes$after";
+		    unshift(@lines, $next);
+		    next; # while xref
+		}
+	    }
+	}
+	$nodes =~ s/\s+/ /g; # remove useless spaces
+	@args = split(/\s*,\s*/, $nodes);
+	$node = $args[0]; # the node is always the first arg
+	$node = &normalise_node($node);
+	$sec = $args[2] || $args[1] || $node2sec{$node};
+	$href = $node2href{$node};
+	if (@args == 5) { # reference to another manual
+	    $sec = $args[2] || $node;
+	    $man = $args[4] || $args[3];
+	    $_ = "${before}${type}$T2H_WORDS->{$T2H_LANG}->{'section'} `$sec' in \@cite{$man}$after";
+	} elsif ($type =~ /Info/) { # inforef
+	    warn "$ERROR Wrong number of arguments: $_" unless @args == 3;
+	    ($nn, $_, $in) = @args;
+	    $_ = "${before}${type} file `$in', node `$nn'$after";
+	} elsif ($sec && $href && ! $T2H_SHORT_REF) {
+	    $_  = "${before}${type}";
+	    $_ .= "$T2H_WORDS->{$T2H_LANG}->{'section'} " if ${type};
+	    $_ .= &t2h_anchor('', $href, $sec) . $after;
+	} 
+	elsif ($href)
+	{
+	  $_ = "${before}${type} " . 
+	    &t2h_anchor('', $href, $args[2] || $args[1] || $node) . 
+	      $after;
+	}
+	else {
+	    warn "$ERROR Undefined node ($node): $_";
+	    $_ = "$before$;0xref{$nodes}$after";
+	}
+    }
+
+    # replace images
+    s[\@image\s*{(.+?)}]
+    {
+     my @args = split (/\s*,\s*/, $1);
+     my $base = $args[0];
+     my $image = 
+       LocateIncludeFile("$base.png") || 
+       LocateIncludeFile("$base.jpg") ||
+       LocateIncludeFile("$base.gif");
+     warn "$ERROR no image file for $base: $_" unless ($image && -e $image);
+     "<IMG SRC=\"$image\" ALT=\"$base\">";
+     ($T2H_CENTER_IMAGE ?
+      "<CENTER><IMG SRC=\"$image\" ALT=\"$base\"></CENTER>" :
+      "<IMG SRC=\"$image\" ALT=\"$base\">");
+    }eg;
+
+    #
+    # try to guess bibliography references or glossary terms
+    #
+    unless (/^<H\d><A NAME=\"SEC\d/) {
+	if ($use_bibliography) {
+	    $done = '';
+	    while (/$BIBRE/o) {
+		($pre, $what, $post) = ($`, $&, $');
+		$href = $bib2href{$what};
+		if (defined($href) && $post !~ /^[^<]*<\/A>/) {
+		    $done .= $pre . &t2h_anchor('', $href, $what);
+		} else {
+		    $done .= "$pre$what";
+		}
+		$_ = $post;
+	    }
+	    $_ = $done . $_;
+	}
+	if ($T2H_USE_GLOSSARY) {
+	    $done = '';
+	    while (/\b\w+\b/) {
+		($pre, $what, $post) = ($`, $&, $');
+		$entry = $what;
+		$entry =~ tr/A-Z/a-z/ unless $entry =~ /^[A-Z\s]+$/;
+		$href = $gloss2href{$entry};
+		if (defined($href) && $post !~ /^[^<]*<\/A>/) {
+		    $done .= $pre . &t2h_anchor('', $href, $what);
+		} else {
+		    $done .= "$pre$what";
+		}
+		$_ = $post;
+	    }
+	    $_ = $done . $_;
+	}
+    }
+    # otherwise
+    push(@lines2, $_);
+}
+print "# end of pass 2\n" if $T2H_VERBOSE;
+
+#
+# split style substitutions
+#
+while (@lines2) {
+    $_ = shift(@lines2);
+    #
+    # special case (protected sections)
+    #
+    if (/^$PROTECTTAG/o) {
+	push(@lines3, $_);
+	next;
+    }
+    #
+    # split style substitutions
+    #
+    $old = '';
+    while ($old ne $_) {
+        $old = $_;
+	if (/\@(\w+)\{/) {
+	    ($before, $style, $after) = ($`, $1, $');
+	    if (defined($style_map{$style})) {
+		$_ = $after;
+		$text = '';
+		$after = '';
+		$failed = 1;
+		while (@lines2) {
+		    if (/\}/) {
+			$text .= $`;
+			$after = $';
+			$failed = 0;
+			last;
+		    } else {
+			$text .= $_;
+			$_ = shift(@lines2);
+		    }
+		}
+		if ($failed) {
+		    die "* Bad syntax (\@$style) after: $before\n";
+		} else {
+		    $text = &apply_style($style, $text);
+		    $_ = "$before$text$after";
+		}
+	    }
+	}
+    }
+    # otherwise
+    push(@lines3, $_);
+}
+print "# end of pass 3\n" if $T2H_VERBOSE;
+	
+#+++############################################################################
+#                                                                              #
+# Pass 4: foot notes, final cleanup                                            #
+#                                                                              #
+#---############################################################################
+
+@foot_lines = ();			# footnotes
+@doc_lines = ();			# final document
+$end_of_para = 0;			# true if last line is <P>
+	
+while (@lines3) {
+    $_ = shift(@lines3);
+    #
+    # special case (protected sections)
+    #
+    if (/^$PROTECTTAG/o) {
+	push(@doc_lines, $_);
+	$end_of_para = 0;
+	next;
+    }
+    #
+    # footnotes
+    #
+    while (/\@footnote([^\{\s]+)\{/) {
+	($before, $d, $after) = ($`, $1, $');
+	$_ = $after;
+	$text = '';
+	$after = '';
+	$failed = 1;
+	while (@lines3) {
+	    if (/\}/) {
+		$text .= $`;
+		$after = $';
+		$failed = 0;
+		last;
+	    } else {
+		$text .= $_;
+		$_ = shift(@lines3);
+	    }
+	}
+	if ($failed) {
+	    die "* Bad syntax (\@footnote) after: $before\n";
+	} else {
+	    $foot_num++;
+	    $docid  = "DOCF$foot_num";
+	    $footid = "FOOT$foot_num";
+	    $foot = "($foot_num)";
+	    push(@foot_lines, "<H3>" . &t2h_anchor($footid, "$d#$docid", $foot) . "</H3>\n");
+	    $text = "<P>$text" unless $text =~ /^\s*<P>/;
+	    push(@foot_lines, "$text\n");
+	    $_ = $before . &t2h_anchor($docid, "$docu_foot#$footid", $foot) . $after;
+	}
+    }
+    #
+    # remove unnecessary <P>
+    #
+    if (/^\s*<P>\s*$/) {
+	next if $end_of_para++;
+    } else {
+	$end_of_para = 0;
+    }
+    # otherwise
+    push(@doc_lines, $_);
+}
+	
+print "# end of pass 4\n" if $T2H_VERBOSE;
+
+#+++############################################################################
+#                                                                              #
+# Pass 5: print things                                                         #
+#                                                                              #
+#---############################################################################
+
+$T2H_L2H = &l2h_FinishToLatex if ($T2H_L2H);
+$T2H_L2H = &l2h_ToHtml        if ($T2H_L2H);
+$T2H_L2H = &l2h_InitFromHtml  if ($T2H_L2H);
+
+# fix node2up, node2prev, node2next, if desired
+if ($has_top_command)
+{
+  for $section (keys %sec2number)
+  {
+    $node = $sec2node{$section};
+    $node2up{$node} = Sec2UpNode($section) unless $node2up{$node};
+    $node2prev{$node} = Sec2PrevNode($section) unless $node2prev{$node};
+    $node2next{$node} = Sec2NextNode($section) unless $node2next{$node};
+  }
+}
+
+# prepare %T2H_THISDOC
+$T2H_THISDOC{fulltitle} = $value{'_title'} || $value{'_settitle'} || "Untitled Document";
+$T2H_THISDOC{title} = $value{'_settitle'} || $T2H_THISDOC{fulltitle};
+$T2H_THISDOC{author} = $value{'_author'};
+$T2H_THISDOC{subtitle} = $value{'_subtitle'};
+$T2H_THISDOC{shorttitle} = $value{'_shorttitle'};
+for $key (keys %T2H_THISDOC)
+{
+  $_ = &substitute_style($T2H_THISDOC{$key});
+  &unprotect_texi;
+  s/\s*$//;
+  $T2H_THISDOC{$key} = $_;
+}
+
+# if no sections, then simply print document as is
+unless (@sections)
+{
+  print "# Writing content into $docu_top_file \n" if $T2H_VERBOSE;
+  open(FILE, "> $docu_top_file") 
+    || die "$ERROR: Can't open $docu_top_file for writing: $!\n";
+
+  &$T2H_print_page_head(\*FILE);
+  $T2H_THIS_SECTION = \@doc_lines;
+  t2h_print_lines(\*FILE);
+  &$T2H_print_foot_navigation(\*FILE);
+  &$T2H_print_page_foot(\*FILE);
+  close(FILE);
+  goto Finish;
+}
+
+# initialize $T2H_HREF, $T2H_NAME
+%T2H_HREF = 
+  (
+   'First' ,   sec_href($sections[0]),
+   'Last',     sec_href($sections[$#sections]),
+   'About',     $docu_about. '#SEC_About',
+  );
+
+# prepare TOC, OVERVIEW, TOP
+$T2H_TOC = \@toc_lines;
+$T2H_OVERVIEW = \@stoc_lines;
+if ($has_top)
+{
+  while (1)
+  {
+    $_ = shift @doc_lines;
+    last if /$TOPEND/;
+    push @$T2H_TOP, $_;
+  }
+  $T2H_HREF{'Top'} = $docu_top . '#SEC_Top';
+}
+else
+{
+  $T2H_HREF{'Top'} = $T2H_HREF{First};
+}
+
+$node2href{Top} = $T2H_HREF{Top};
+$T2H_HREF{Contents} = $docu_toc.'#SEC_Contents' if @toc_lines;
+$T2H_HREF{Overview} = $docu_stoc.'#SEC_OVERVIEW' if @stoc_lines;
+
+# settle on index
+if ($T2H_INDEX_CHAPTER)
+{
+  $T2H_HREF{Index} = $node2href{normalise_node($T2H_INDEX_CHAPTER)};
+  warn "$ERROR T2H_INDEX_CHAPTER '$T2H_INDEX_CHAPTER' not found\n"
+    unless $T2H_HREF{Index};
+}
+if (! $T2H_HREF{Index} && $first_index_chapter)
+{
+  $T2H_INDEX_CHAPTER = $first_index_chapter;
+  $T2H_HREF{Index} = $node2href{$T2H_INDEX_CHAPTER};
+}
+
+print "# Using '" . clean_name($T2H_INDEX_CHAPTER) . "' as index page\n"
+  if ($T2H_VERBOSE && $T2H_HREF{Index});
+
+%T2H_NAME =
+  (
+   'First',   clean_name($sec2node{$sections[0]}),
+   'Last',    clean_name($sec2node{$sections[$#sections]}),
+   'About',    $T2H_WORDS->{$T2H_LANG}->{'About_Title'},
+   'Contents', $T2H_WORDS->{$T2H_LANG}->{'ToC_Title'},
+   'Overview', $T2H_WORDS->{$T2H_LANG}->{'Overview_Title'},
+   'Index' ,   clean_name($T2H_INDEX_CHAPTER),
+   'Top',      clean_name($T2H_TOP_HEADING || $T2H_THISDOC{'title'} || $T2H_THISDOC{'shorttitle'}),
+  );
+
+#############################################################################
+# print frame and frame toc file
+#
+if ( $T2H_FRAMES )
+{
+  open(FILE, "> $docu_frame_file") 
+    || die "$ERROR: Can't open $docu_frame_file for writing: $!\n";
+  print "# Creating frame in $docu_frame_file ...\n" if $T2H_VERBOSE;
+  &$T2H_print_frame(\*FILE);
+  close(FILE);
+
+  open(FILE, "> $docu_toc_frame_file") 
+    || die "$ERROR: Can't open $docu_toc_frame_file for writing: $!\n";
+  print "# Creating toc frame in $docu_frame_file ...\n" if $T2H_VERBOSE;
+   &$T2H_print_toc_frame(\*FILE);
+  close(FILE);
+}
+
+
+#############################################################################
+# print Top
+#
+open(FILE, "> $docu_top_file") 
+  || die "$ERROR: Can't open $docu_top_file for writing: $!\n";
+&$T2H_print_page_head(\*FILE) unless ($T2H_SPLIT);
+
+if ($has_top)
+{
+  print "# Creating Top in $docu_top_file ...\n" if $T2H_VERBOSE;
+  $T2H_THIS_SECTION = $T2H_TOP;
+  $T2H_HREF{This} = $T2H_HREF{Top};
+  $T2H_NAME{This} = $T2H_NAME{Top};
+  &$T2H_print_Top(\*FILE);
+}
+  
+close(FILE) if $T2H_SPLIT;
+
+#############################################################################
+# Print sections
+#
+$T2H_NODE{Forward} = $sec2node{$sections[0]};
+$T2H_NAME{Forward} = &clean_name($sec2node{$sections[0]});
+$T2H_HREF{Forward} = sec_href($sections[0]);
+$T2H_NODE{This} = 'Top';
+$T2H_NAME{This} = $T2H_NAME{Top};
+$T2H_HREF{This} = $T2H_HREF{Top};
+if ($T2H_SPLIT)
+{
+  print "# writing " . scalar(@sections) . 
+    " sections in $docu_rdir$docu_name"."_[1..$doc_num]"
+	  if $T2H_VERBOSE;
+  $previous = ($T2H_SPLIT eq 'chapter' ? $CHAPTEREND : $SECTIONEND);
+  undef $FH;
+  $doc_num = 0;
+}
+else
+{
+  print "# writing " . scalar(@sections) . " sections in $docu_top_file ..." 
+    if $T2H_VERBOSE;
+  $FH = \*FILE;
+  $previous = '';
+}
+
+$counter = 0;
+# loop through sections
+while ($section = shift(@sections)) 
+{
+  if ($T2H_SPLIT && ($T2H_SPLIT eq 'section' || $previous eq $CHAPTEREND))
+  { 
+    if ($FH)
+    {
+      #close previous page
+      &$T2H_print_chapter_footer($FH) if $T2H_SPLIT eq 'chapter';
+      &$T2H_print_page_foot($FH);
+      close($FH);
+      undef $FH;
+    }
+  }
+  $T2H_NAME{Back} = $T2H_NAME{This};
+  $T2H_HREF{Back} = $T2H_HREF{This};
+  $T2H_NODE{Back} = $T2H_NODE{This};
+  $T2H_NAME{This} = $T2H_NAME{Forward};
+  $T2H_HREF{This} = $T2H_HREF{Forward};
+  $T2H_NODE{This} = $T2H_NODE{Forward};
+  if ($sections[0])
+  {
+    $T2H_NODE{Forward} = $sec2node{$sections[0]};
+    $T2H_NAME{Forward} = &clean_name($T2H_NODE{Forward});
+    $T2H_HREF{Forward} = sec_href($sections[0]);
+  }
+  else
+  {
+    undef $T2H_HREF{Forward}, $T2H_NODE{Forward}, $T2H_NAME{Forward};
+  }
+
+  $node = $node2up{$T2H_NODE{This}};
+  $T2H_HREF{Up} = $node2href{$node};
+  if ($T2H_HREF{Up} eq $T2H_HREF{This} || ! $T2H_HREF{Up})
+  {
+    $T2H_NAME{Up} = $T2H_NAME{Top};
+    $T2H_HREF{Up} = $T2H_HREF{Top};
+    $T2H_NODE{Up} = 'Up';
+  }
+  else
+  {
+    $T2H_NAME{Up} = &clean_name($node);
+    $T2H_NODE{Up} = $node;
+  }
+
+  $node = $T2H_NODE{This};
+  $node = $node2prev{$node};
+  $T2H_NAME{Prev} = &clean_name($node);
+  $T2H_HREF{Prev} = $node2href{$node};
+  $T2H_NODE{Prev} = $node;
+
+  $node = $T2H_NODE{This};
+  if ($node2up{$node} && $node2up{$node} ne 'Top'&&
+      ($node2prev{$node} eq $T2H_NODE{Back} || ! $node2prev{$node}))
+  {
+    $node = $node2up{$node};
+    while ($node && $node ne $node2up{$node} && ! $node2prev{$node})
+    {
+      $node = $node2up{$node};
+    }
+    $node = $node2prev{$node} 
+      unless $node2up{$node} eq 'Top' || ! $node2up{$node};
+  }
+  else
+  {
+    $node = $node2prev{$node};
+  }
+  $T2H_NAME{FastBack} = &clean_name($node);
+  $T2H_HREF{FastBack} = $node2href{$node};
+  $T2H_NODE{FastBack} = $node;
+  
+  $node = $T2H_NODE{This};
+  $node = $node2next{$node};
+  $T2H_NAME{Next} = &clean_name($node);
+  $T2H_HREF{Next} = $node2href{$node};
+  $T2H_NODE{Next} = $node;
+
+  $node = $T2H_NODE{This};
+  if ($node2up{$node} && $node2up{$node} ne 'Top'&& 
+      ($node2next{$node} eq $T2H_NODE{Forward} || ! $node2next{$node}))
+  {
+    $node = $node2up{$node};
+    while ($node && $node ne $node2up{$node} && ! $node2next{$node})
+    {
+      $node = $node2up{$node};
+    }
+  }
+  $node = $node2next{$node};
+  $T2H_NAME{FastForward} = &clean_name($node);
+  $T2H_HREF{FastForward} = $node2href{$node};
+  $T2H_NODE{FastForward} = $node;
+
+  if (! defined($FH))
+  {
+    my $file = $T2H_HREF{This};
+    $file =~ s/\#.*$//;
+    open(FILE, "> $docu_rdir$file") || 
+      die "$ERROR: Can't open $docu_rdir$file for writing: $!\n";
+    $FH = \*FILE;
+    &$T2H_print_page_head($FH);
+    t2h_print_label($FH);
+    &$T2H_print_chapter_header($FH) if $T2H_SPLIT eq 'chapter';
+  }
+  else
+  {
+    t2h_print_label($FH);
+  }
+
+  $T2H_THIS_SECTION = [];
+  while (@doc_lines) {
+    $_ = shift(@doc_lines);
+    last if ($_ eq $SECTIONEND || $_ eq $CHAPTEREND);
+    push(@$T2H_THIS_SECTION, $_);
+  }
+  $previous = $_;
+  &$T2H_print_section($FH);
+
+  if ($T2H_VERBOSE)
+  {
+    $counter++;
+    print "." if $counter =~ /00$/;
+  }
+}
+if ($T2H_SPLIT)
+{
+  &$T2H_print_chapter_footer($FH) if $T2H_SPLIT eq 'chapter';
+  &$T2H_print_page_foot($FH);
+  close($FH);
+}
+print "\n" if $T2H_VERBOSE;
+
+#############################################################################
+# Print ToC, Overview, Footnotes
+#
+undef $T2H_HREF{Prev};
+undef $T2H_HREF{Next};
+undef $T2H_HREF{Back};
+undef $T2H_HREF{Forward};
+undef $T2H_HREF{Up};
+
+if (@foot_lines)
+{
+  print "# writing Footnotes in $docu_foot_file...\n" if $T2H_VERBOSE;
+  open (FILE, "> $docu_foot_file") || die "$ERROR: Can't open $docu_foot_file for writing: $!\n"
+      if $T2H_SPLIT;
+  $T2H_HREF{This} = $docu_foot;
+  $T2H_NAME{This} = $T2H_WORDS->{$T2H_LANG}->{'Footnotes_Title'};
+  $T2H_THIS_SECTION = \@foot_lines;
+  &$T2H_print_Footnotes(\*FILE);
+  close(FILE) if $T2H_SPLIT;
+}
+
+if (@toc_lines)
+{
+  print "# writing Toc in $docu_toc_file...\n" if $T2H_VERBOSE;
+  open (FILE, "> $docu_toc_file") || die "$ERROR: Can't open $docu_toc_file for writing: $!\n"
+      if $T2H_SPLIT;
+  $T2H_HREF{This} = $T2H_HREF{Contents};
+  $T2H_NAME{This} = $T2H_NAME{Contents};
+  $T2H_THIS_SECTION = \@toc_lines;
+  &$T2H_print_Toc(\*FILE);
+  close(FILE) if $T2H_SPLIT;
+}
+
+if (@stoc_lines)
+{
+  print "# writing Overview in $docu_stoc_file...\n" if $T2H_VERBOSE;
+  open (FILE, "> $docu_stoc_file") || die "$ERROR: Can't open $docu_stoc_file for writing: $!\n"
+      if $T2H_SPLIT;
+  
+  $T2H_HREF{This} = $T2H_HREF{Overview};
+  $T2H_NAME{This} = $T2H_NAME{Overview};
+  $T2H_THIS_SECTION = \@stoc_lines;
+  unshift @$T2H_THIS_SECTION, "<BLOCKQUOTE>\n";
+  push @$T2H_THIS_SECTION, "\n</BLOCKQUOTE>\n";
+  &$T2H_print_Overview(\*FILE);
+  close(FILE) if $T2H_SPLIT;
+}
+
+if ($about_body = &$T2H_about_body())
+{
+  print "# writing About in $docu_about_file...\n" if $T2H_VERBOSE;
+  open (FILE, "> $docu_about_file") || die "$ERROR: Can't open $docu_about_file for writing: $!\n"
+      if $T2H_SPLIT;
+  
+  $T2H_HREF{This} = $T2H_HREF{About};
+  $T2H_NAME{This} = $T2H_NAME{About};
+  $T2H_THIS_SECTION = [$about_body];
+  &$T2H_print_About(\*FILE);
+  close(FILE) if $T2H_SPLIT;
+}
+
+unless ($T2H_SPLIT)
+{
+  &$T2H_print_page_foot(\*FILE);
+  close (FILE);
+}
+  
+Finish:
+&l2h_FinishFromHtml if ($T2H_L2H);
+&l2h_Finish if($T2H_L2H);
+print "# that's all folks\n" if $T2H_VERBOSE;
+
+exit(0);
+
+#+++############################################################################
+#                                                                              #
+# Low level functions                                                          #
+#                                                                              #
+#---############################################################################
+
+sub LocateIncludeFile
+{
+  my $file = shift;
+  my $dir;
+
+  return $file if (-e $file && -r $file);
+  foreach $dir (@T2H_INCLUDE_DIRS)
+  {
+    return "$dir/$file" if (-e "$dir/$file" && -r "$dir/$file");
+  }
+  return undef;
+}
+
+sub clean_name 
+{
+  local ($_);
+  $_ = &remove_style($_[0]);
+  &unprotect_texi;
+  return $_;
+}
+
+sub update_sec_num {
+    local($name, $level) = @_;
+    my $ret;
+
+    $level--; # here we start at 0
+    if ($name =~ /^appendix/ || defined(@appendix_sec_num)) {
+	# appendix style
+	if (defined(@appendix_sec_num)) {
+	    &incr_sec_num($level, @appendix_sec_num);
+	} else {
+	    @appendix_sec_num = ('A', 0, 0, 0);
+	}
+	$ret = join('.', @appendix_sec_num[0..$level]);
+    } else {
+	# normal style
+	if (defined(@normal_sec_num)) 
+	{
+	  &incr_sec_num($level, @normal_sec_num);
+	} 
+	else 
+	{
+	  @normal_sec_num = (1, 0, 0, 0);
+	}
+	$ret = join('.', @normal_sec_num[0..$level]);
+    }
+    
+    $ret .= "." if $level == 0;
+    return $ret;
+}
+
+sub incr_sec_num {
+    local($level, $l);
+    $level = shift(@_);
+    $_[$level]++;
+    foreach $l ($level+1 .. 3) {
+	$_[$l] = 0;
+    }
+}
+
+sub Sec2UpNode
+{
+  my $sec = shift;
+  my $num = $sec2number{$sec};
+
+  return '' unless $num;
+  return 'Top' unless $num =~ /\.\d+/;
+  $num =~ s/\.[^\.]*$//;
+  $num = $num . '.' unless $num =~ /\./;
+  return $sec2node{$number2sec{$num}};
+}
+
+sub Sec2PrevNode
+{
+  my $sec = shift;
+  my $num = $sec2number{$sec};
+  my ($i, $post);
+  
+  if ($num =~ /(\w+)(\.$|$)/)
+  {
+    $num = $`;
+    $i = $1;
+    $post = $2;
+    if ($i eq 'A')
+    {
+      $i = $normal_sec_num[0];
+    }
+    elsif ($i ne '1')
+    {
+      # unfortunately, -- operator is not magical
+      $i = chr(ord($i) + 1);
+    }
+    else
+    {
+      return '';
+    }
+    return $sec2node{$number2sec{$num . $i . $post}}
+  }
+  return '';
+}
+
+sub Sec2NextNode
+{
+  my $sec = shift;
+  my $num = $sec2number{$sec};
+  my $i;
+
+  if ($num =~ /(\w+)(\.$|$)/)
+  {
+    $num = $`;
+    $i = $1;
+    $post = $2;
+    if ($post eq '.' && $i eq $normal_sec_num[0])
+    {
+      $i = 'A';
+    }
+    else
+    {
+      $i++;
+    }
+    return $sec2node{$number2sec{$num . $i . $post}}
+  }
+  return '';
+}
+
+sub check {
+    local($_, %seen, %context, $before, $match, $after);
+
+    while (<>) {
+	if (/\@(\*|\.|\:|\@|\{|\})/) {
+	    $seen{$&}++;
+	    $context{$&} .= "> $_" if $T2H_VERBOSE;
+	    $_ = "$`XX$'";
+	    redo;
+	}
+	if (/\@(\w+)/) {
+	    ($before, $match, $after) = ($`, $&, $');
+	    if ($before =~ /\b[\w-]+$/ && $after =~ /^[\w-.]*\b/) { # e-mail address
+		$seen{'e-mail address'}++;
+		$context{'e-mail address'} .= "> $_" if $T2H_VERBOSE;
+	    } else {
+		$seen{$match}++;
+		$context{$match} .= "> $_" if $T2H_VERBOSE;
+	    }
+	    $match =~ s/^\@/X/;
+	    $_ = "$before$match$after";
+	    redo;
+	}
+    }
+    
+    foreach (sort(keys(%seen))) {
+	if ($T2H_VERBOSE) {
+	    print "$_\n";
+	    print $context{$_};
+	} else {
+	    print "$_ ($seen{$_})\n";
+	}
+    }
+}
+
+sub open {
+    local($name) = @_;
+
+    ++$fh_name;
+    if (open($fh_name, $name)) {
+	unshift(@fhs, $fh_name);
+    } else {
+	warn "$ERROR Can't read file $name: $!\n";
+    }
+}
+
+sub init_input {
+    @fhs = ();			# hold the file handles to read
+    @input_spool = ();		# spooled lines to read
+    $fh_name = 'FH000';
+    &open($docu);
+}
+
+sub next_line {
+    local($fh, $line);
+
+    if (@input_spool) {
+	$line = shift(@input_spool);
+	return($line);
+    }
+    while (@fhs) {
+	$fh = $fhs[0];
+	$line = <$fh>;
+	return($line) if $line;
+	close($fh);
+	shift(@fhs);
+    }
+    return(undef);
+}
+
+# used in pass 1, use &next_line
+sub skip_until {
+    local($tag) = @_;
+    local($_);
+
+    while ($_ = &next_line) {
+	return if /^\@end\s+$tag\s*$/;
+    }
+    die "* Failed to find '$tag' after: " . $lines[$#lines];
+}
+
+# used in pass 1 for l2h use &next_line
+sub string_until {
+    local($tag) = @_;
+    local($_, $string);
+
+    while ($_ = &next_line) {
+	return $string if /^\@end\s+$tag\s*$/;
+#	$_ =~ s/hbox/mbox/g;
+	$string = $string.$_;
+    }
+    die "* Failed to find '$tag' after: " . $lines[$#lines];
+}
+
+#
+# HTML stacking to have a better HTML output
+#
+
+sub html_reset {
+    @html_stack = ('html');
+    $html_element = 'body';
+}
+
+sub html_push {
+    local($what) = @_;
+    push(@html_stack, $html_element);
+    $html_element = $what;
+}
+
+sub html_push_if {
+    local($what) = @_;
+    push(@html_stack, $html_element)
+	if ($html_element && $html_element ne 'P');
+    $html_element = $what;
+}
+
+sub html_pop {
+    $html_element = pop(@html_stack);
+}
+
+sub html_pop_if {
+    local($elt);
+
+    if (@_) {
+	foreach $elt (@_) {
+	    if ($elt eq $html_element) {
+		$html_element = pop(@html_stack) if @html_stack;
+		last;
+	    }
+	}
+    } else {
+	$html_element = pop(@html_stack) if @html_stack;
+    }
+}
+
+sub html_debug {
+    local($what, $line) = @_;
+    if ($T2H_DEBUG & $DEBUG_HTML)
+    {
+     $what = "\n" unless $what;
+     return("<!-- $line @html_stack, $html_element -->$what")
+    }	
+    return($what);
+}
+
+# to debug the output...
+sub debug {
+    local($what, $line) = @_;
+    return("<!-- $line -->$what")
+	if $T2H_DEBUG & $DEBUG_HTML;
+    return($what);
+}
+
+sub SimpleTexi2Html
+{
+  local $_ = $_[0];
+  &protect_texi;
+  &protect_html;
+  $_ = substitute_style($_);
+  $_[0]  = $_;
+}
+
+sub normalise_node {
+  local $_ = $_[0];
+  s/\s+/ /g;
+  s/ $//;
+  s/^ //;
+  &protect_texi;
+  &protect_html;
+  $_ = substitute_style($_);
+  $_[0]  = $_;
+}
+
+sub menu_entry 
+{
+  my ($node, $name, $descr) = @_;
+  my ($href, $entry);
+  
+  &normalise_node($node);
+  $href = $node2href{$node};
+  if ($href) 
+  {
+    $descr =~ s/^\s+//;
+    $descr =~ s/\s*$//;
+    $descr = SimpleTexi2Html($descr);
+    if ($T2H_NUMBER_SECTIONS && !$T2H_NODE_NAME_IN_MENU && $node2sec{$node})
+    {
+      $entry = $node2sec{$node};
+      $name = '';
+    }
+    else
+    {
+      &normalise_node($name);
+      $entry = ($name && ($name ne $node || ! $T2H_AVOID_MENU_REDUNDANCY) 
+		? "$name : $node" : $node);
+    }
+
+    if ($T2H_AVOID_MENU_REDUNDANCY && $descr)
+    {
+      my $clean_entry = $entry;
+      $clean_entry =~ s/^.*? // if ($clean_entry =~ /^([A-Z]|\d+)\.[\d\.]* /);
+      $clean_entry =~ s/[^\w]//g;
+      my $clean_descr = $descr;
+      $clean_descr =~ s/[^\w]//g;
+      $descr = '' if ($clean_entry eq $clean_descr)
+    }
+    push(@lines2,&debug('<TR><TD ALIGN="left" VALIGN="TOP">' . 
+			&t2h_anchor('', $href, $entry) . 
+			'</TD><TD>&nbsp;&nbsp;</TD><TD ALIGN="left" VALIGN="TOP">' . 
+			$descr . 
+			"</TD></TR>\n", __LINE__));
+  }
+  elsif ($node =~ /^\(.*\)\w+/)
+  {
+    push(@lines2,&debug('<TR><TD ALIGN="left" VALIGN="TOP">' . 
+			$entry . 
+			'</TD><TD ALIGN="left" VALIGN="TOP">' . $descr . 
+			"</TD></TR>\n", __LINE__))
+  }
+  else
+  {
+    warn "$ERROR Undefined node of menu_entry ($node): $_";
+  }
+}
+
+sub do_ctrl { "^$_[0]" }
+
+sub do_email {
+    local($addr, $text) = split(/,\s*/, $_[0]);
+
+    $text = $addr unless $text;
+    &t2h_anchor('', "mailto:$addr", $text);
+}
+
+sub do_sc 
+{ 
+  # l2h does this much better
+  return &l2h_ToLatex("{\\sc ".&unprotect_html($_[0])."}") if ($T2H_L2H);
+  return "\U$_[0]\E";
+}
+
+sub do_math
+{
+  return &l2h_ToLatex("\$".&unprotect_html($_[0])."\$") if ($T2H_L2H);
+  return "<EM>".$text."</EM>";
+}
+
+sub do_uref {
+    local($url, $text, $only_text) = split(/,\s*/, $_[0]);
+
+    $text = $only_text if $only_text;
+    $text = $url unless $text;
+    &t2h_anchor('', $url, $text);
+}
+
+sub do_url { &t2h_anchor('', $_[0], $_[0]) }
+
+sub do_acronym
+{
+  return '<FONT SIZE="-1">' . $_[0] . '</FONT>';
+}
+
+sub do_accent
+{
+  return "&$_[0]acute;" if $_[1] eq 'H';
+  return "$_[0]." if $_[1] eq 'dotaccent';
+  return "$_[0]*" if $_[1] eq 'ringaccent';
+  return "$_[0]".'[' if $_[1] eq 'tieaccent';
+  return "$_[0]".'(' if $_[1] eq 'u';
+  return "$_[0]_" if $_[1] eq 'ubaraccent';
+  return ".$_[0]" if $_[1] eq 'udotaccent';
+  return "$_[0]&lt;" if $_[1] eq 'v';
+  return "&$_[0]cedil;" if $_[1] eq ',';
+  return "$_[0]" if $_[1] eq 'dotless';
+  return undef;
+}
+
+sub apply_style {
+    local($texi_style, $text) = @_;
+    local($style);
+
+    $style = $style_map{$texi_style};
+    if (defined($style)) { # known style
+	if ($style =~ /^\"/) { # add quotes
+	    $style = $';
+	    $text = "\`$text\'";
+	}
+	if ($style =~ /^\&/) { # custom
+	    $style = $';
+	    $text = &$style($text, $texi_style);
+	} elsif ($style) { # good style
+	    $text = "<$style>$text</$style>";
+	} else { # no style
+	}
+    } else { # unknown style
+	$text = undef;
+    }
+    return($text);
+}
+
+# remove Texinfo styles
+sub remove_style {
+    local($_) = @_;
+    1 while(s/\@\w+{([^\{\}]+)}/$1/g);
+    return($_);
+}
+
+sub remove_things
+{
+  local ($_) = @_;
+  s|\@(\w+)\{\}|$1|g;
+  return $_;
+}
+
+sub substitute_style {
+    local($_) = @_;
+    local($changed, $done, $style, $text);
+
+    &simple_substitutions;
+    $changed = 1;
+    while ($changed) {
+	$changed = 0;
+	$done = '';
+	while (/\@(\w+){([^\{\}]+)}/ || /\@(,){([^\{\}]+)}/) {
+	    $text = &apply_style($1, $2);
+	    if ($text) {
+		$_ = "$`$text$'";
+		$changed = 1;
+	    } else {
+		$done .= "$`\@$1";
+		$_ = "{$2}$'";
+	    }
+	}
+        $_ = $done . $_;
+    }
+    return($_);
+}
+
+sub t2h_anchor {
+    local($name, $href, $text, $newline, $extra_attribs) = @_;
+    local($result);
+
+    $result = "<A";
+    $result .= " NAME=\"$name\"" if $name;
+    if ($href)
+    {
+      $href =~ s|^$T2H_HREF_DIR_INSTEAD_FILE|./| 
+	if ($T2H_HREF_DIR_INSTEAD_FILE);
+      $result .= ($href =~ /\"/ ? " HREF='$href'"  : " HREF=\"$href\"");
+    }
+    $result .= " $extra_attribs" if $extra_attribs;
+    $result .= ">$text</A>";
+    $result .= "\n" if $newline;
+    return($result);
+}
+
+sub pretty_date {
+    local(@MoY, $sec, $min, $hour, $mday, $mon, $year, $wday, $yday, $isdst);
+
+    @MoY = ('January', 'February', 'March', 'April', 'May', 'June',
+	    'July', 'August', 'September', 'October', 'November', 'December');
+    ($sec, $min, $hour, $mday, $mon, $year, $wday, $yday, $isdst) = localtime(time);
+    $year += ($year < 70) ? 2000 : 1900;
+    # obachman: Let's do it as the Americans do
+    return("$MoY[$mon], $mday  $year");
+}
+
+sub doc_href {
+    local($num) = @_;
+
+    return("${docu_name}_$num.$docu_ext");
+}
+
+sub sec_href
+{
+  return $node2href{$sec2node{$_[0]}};
+}
+
+sub next_doc {
+    $docu_doc = &doc_href(++$doc_num);
+}
+
+sub t2h_print_lines {
+    my ($fh, $lines) = @_;
+    local($_);
+    $lines = $T2H_THIS_SECTION unless $lines;
+    my $cnt = 0;
+    for (@$lines) 
+    {
+	$_ = l2h_FromHtml($_) if ($T2H_L2H);
+	if (/^$PROTECTTAG/o) {
+	    $_ = $tag2pro{$_};
+	} else {
+	    &unprotect_texi;
+	}
+	print $fh $_;
+	$cnt += split(/\W*\s+\W*/);
+    }
+    return $cnt;
+}
+
+sub protect_texi {
+    # protect @ { } ` '
+    s/\@\@/$;0/go;
+    s/\@\{/$;1/go;
+    s/\@\}/$;2/go;
+    s/\@\`/$;3/go;
+    s/\@\'/$;4/go;
+}
+
+sub protect_html {
+    local($what) = @_;
+    # protect & < >
+    $what =~ s/\&/\&\#38;/g;
+    $what =~ s/\</\&\#60;/g;
+    $what =~ s/\>/\&\#62;/g;
+    # restore anything in quotes
+    # this fixes my problem where I had:
+    # < IMG SRC="leftarrow.gif" ALT="<--" >  but what if I wanted &#60; in my ALT text ??
+    # maybe byte stuffing or some other technique should be used.
+    $what =~ s/\"([^\&]+)\&\#60;(.*)\"/"$1<$2"/g;
+    $what =~ s/\"([^\&]+)\&\#62;(.*)\"/"$1>$2"/g;
+    $what =~ s/\"([^\&]+)\&\#38;(.*)\"/"$1&$2"/g;
+    # but recognize some HTML things
+    $what =~ s/\&\#60;\/A\&\#62;/<\/A>/g;	      # </A>
+    $what =~ s/\&\#60;A ([^\&]+)\&\#62;/<A $1>/g;     # <A [^&]+>
+    $what =~ s/\&\#60;IMG ([^\&]+)\&\#62;/<IMG $1>/g; # <IMG [^&]+>
+    return($what);
+}
+
+sub unprotect_texi {
+    s/$;0/\@/go;
+    s/$;1/\{/go;
+    s/$;2/\}/go;
+    s/$;3/\`/go;
+    s/$;4/\'/go;
+}
+
+sub Unprotect_texi 
+{
+  local $_ = shift;
+  &unprotect_texi;
+  return($_);
+}
+
+sub unprotect_html {
+    local($what) = @_;
+    $what =~ s/\&\#38;/\&/g;
+    $what =~ s/\&\#60;/\</g;
+    $what =~ s/\&\#62;/\>/g;
+    return($what);
+}
+
+sub t2h_print_label
+{
+    my $fh = shift;
+    my $href = shift || $T2H_HREF{This};
+    $href =~ s/.*#(.*)$/$1/;
+    print $fh qq{<A NAME="$href"></A>\n};
+}
+
+##############################################################################
+
+	# These next few lines are legal in both Perl and nroff.
+
+.00 ;			# finish .ig
+ 
+'di			\" finish diversion--previous line must be blank
+.nr nl 0-1		\" fake up transition to first page again
+.nr % 0			\" start at page 1
+'; __END__ ############# From here on it's a standard manual page ############
+.so /usr/local/man/man1/texi2html.1
diff --git a/support/xcase.c b/support/xcase.c
new file mode 100644
index 0000000..527840d
--- /dev/null
+++ b/support/xcase.c
@@ -0,0 +1,98 @@
+/* xcase - change uppercase characters to lowercase or vice versa. */
+
+/* Copyright (C) 2008,2009 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <stdio.h>
+#include <ctype.h>
+
+#if HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+
+#include "bashansi.h"
+#include <errno.h>
+
+#ifndef errno
+extern int errno;
+#endif
+
+extern int optind;
+
+#define LOWER	1
+#define UPPER	2
+
+int
+main(ac, av)
+int	ac;
+char	**av;
+{
+	int	c, x;
+	int	op;
+	FILE	*inf;
+
+	op = 0;
+	while ((c = getopt(ac, av, "lnu")) != EOF) {
+		switch (c) {
+		case 'n':
+			setbuf (stdout, (char *)NULL);
+			break;
+		case 'u':
+			op = UPPER;
+			break;
+		case 'l':
+			op = LOWER;
+			break;
+		default:
+			fprintf(stderr, "casemod: usage: casemod [-lnu] [file]\n");
+			exit(2);
+		}
+	}
+	av += optind;
+	ac -= optind;
+
+	if (av[0] && (av[0][0] != '-' || av[0][1])) {
+		inf = fopen(av[0], "r");
+		if (inf == 0) {
+			fprintf(stderr, "casemod: %s: cannot open: %s\n", av[0], strerror(errno));
+			exit(1);
+		}
+	} else
+		inf = stdin;
+
+	while ((c = getc(inf)) != EOF) {
+		switch (op) {
+		case UPPER:
+			x = islower(c) ? toupper(c) : c;
+			break;
+		case LOWER:
+			x = isupper(c) ? tolower(c) : c;
+			break;
+		default:
+			x = c;
+			break;
+		}
+		putchar(x);
+	}
+			
+	exit(0);
+}
diff --git a/support/xenix-link.sh b/support/xenix-link.sh
new file mode 100755
index 0000000..4d82e00
--- /dev/null
+++ b/support/xenix-link.sh
@@ -0,0 +1,84 @@
+:
+# link bash for Xenix under SCO Unix
+#
+# For xenix 2.2:
+#	CC="cc -xenix -lx" ./configure
+#	edit config.h:
+#		comment out the define for HAVE_DIRENT_H
+#		enable the define for HAVE_SYS_NDIR_H to 1
+#	make
+#	CC="cc -xenix -lx" ./link.sh
+#
+# For xenix 2.3:
+#	CC="cc -x2.3" ./configure
+#	make
+#	CC="cc -x2.3" ./link.sh
+
+# Copyright (C) 1989-2002 Free Software Foundation, Inc.
+#
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+set -x
+
+rm -f bash
+
+if [ -z "$CC" ]
+then
+	if [ -f /unix ] && [ ! -f /xenix ]
+	then
+		CC="cc -xenix"
+	else
+		CC=gcc
+	fi
+fi
+
+try_dir=no
+try_23=no
+try_x=yes
+
+case "$CC" in
+*-ldir*) try_dir=yes ;;
+esac
+
+case "$CC" in
+*-lx*) try_23=no ; try_x=yes ;;
+esac
+
+case "$CC" in
+*-x2.3*|*-l2.3*) try_23=yes ; try_dir=yes ;;
+esac
+
+libs=
+try="socket"
+if [ $try_dir = yes ] ; then try="$try dir" ; fi
+if [ $try_23 = yes ] ; then try="$try 2.3" ; fi
+if [ $try_x = yes ] ; then try="$try x" ; fi
+for name in $try
+do
+	if [ -r "/lib/386/Slib${name}.a" ] ; then libs="$libs -l$name" ; fi
+done
+
+$CC -o bash shell.o eval.o y.tab.o \
+general.o make_cmd.o print_cmd.o dispose_cmd.o execute_cmd.o variables.o \
+copy_cmd.o error.o expr.o flags.o nojobs.o subst.o hashcmd.o hashlib.o \
+mailcheck.o trap.o input.o unwind_prot.o pathexp.o sig.o test.o \
+version.o alias.o array.o braces.o bracecomp.o bashhist.o bashline.o \
+getcwd.o siglist.o vprint.o oslib.o list.o stringlib.o locale.o \
+xmalloc.o builtins/libbuiltins.a \
+lib/readline/libreadline.a lib/readline/libhistory.a \
+-ltermcap lib/glob/libglob.a lib/tilde/libtilde.a lib/malloc/libmalloc.a \
+$libs
+
+ls -l bash
diff --git a/support/zecho.c b/support/zecho.c
new file mode 100644
index 0000000..f3a4fe0
--- /dev/null
+++ b/support/zecho.c
@@ -0,0 +1,43 @@
+/* zecho - bare-bones echo */
+
+/* Copyright (C) 1996-2002 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if defined (HAVE_CONFIG_H)
+#  include  <config.h>
+#endif
+
+#include "bashansi.h"
+#include <stdio.h>
+
+int
+main(argc, argv)
+int	argc;
+char	**argv;
+{
+	argv++;
+
+	while (*argv) {
+		(void)printf("%s", *argv);
+		if (*++argv)
+			putchar(' ');
+	}
+
+	putchar('\n');
+	exit(0);
+}
diff --git a/syntax.h b/syntax.h
new file mode 100644
index 0000000..34f5496
--- /dev/null
+++ b/syntax.h
@@ -0,0 +1,106 @@
+/* syntax.h -- Syntax definitions for the shell */
+
+/* Copyright (C) 2000, 2001, 2005, 2008, 2009-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _SYNTAX_H_
+#define _SYNTAX_H_
+
+/* Defines for use by mksyntax.c */
+
+#define slashify_in_quotes "\\`$\"\n"
+#define slashify_in_here_document "\\`$"
+
+#define shell_meta_chars   "()<>;&|"
+#define shell_break_chars  "()<>;&| \t\n"
+
+#define shell_quote_chars	"\"`'"
+
+#if defined (PROCESS_SUBSTITUTION)
+#  define shell_exp_chars		"$<>"
+#else
+#  define shell_exp_chars		"$"
+#endif
+
+#if defined (EXTENDED_GLOB)
+#  define ext_glob_chars	"@*+?!"
+#else
+#  define ext_glob_chars	""
+#endif
+#define shell_glob_chars	"*?[]^"
+
+/* Defines shared by mksyntax.c and the rest of the shell code. */
+
+/* Values for character flags in syntax tables */
+
+#define CWORD		0x0000	/* nothing special; an ordinary character */
+#define CSHMETA		0x0001	/* shell meta character */
+#define CSHBRK		0x0002	/* shell break character */
+#define CBACKQ		0x0004	/* back quote */
+#define CQUOTE		0x0008	/* shell quote character */
+#define CSPECL		0x0010	/* special character that needs quoting */
+#define CEXP		0x0020	/* shell expansion character */
+#define CBSDQUOTE	0x0040	/* characters escaped by backslash in double quotes */
+#define CBSHDOC		0x0080	/* characters escaped by backslash in here doc */
+#define CGLOB		0x0100	/* globbing characters */
+#define CXGLOB		0x0200	/* extended globbing characters */
+#define CXQUOTE		0x0400	/* cquote + backslash */
+#define CSPECVAR	0x0800	/* single-character shell variable name */
+#define CSUBSTOP	0x1000	/* values of OP for ${word[:]OPstuff} */
+#define CBLANK		0x2000	/* whitespace (blank) character */
+
+/* Defines for use by the rest of the shell. */
+extern int sh_syntaxtab[];
+extern int sh_syntabsiz;
+
+#define shellmeta(c)	(sh_syntaxtab[(unsigned char)(c)] & CSHMETA)
+#define shellbreak(c)	(sh_syntaxtab[(unsigned char)(c)] & CSHBRK)
+#define shellquote(c)	(sh_syntaxtab[(unsigned char)(c)] & CQUOTE)
+#define shellxquote(c)	(sh_syntaxtab[(unsigned char)(c)] & CXQUOTE)
+
+#define shellblank(c)	(sh_syntaxtab[(unsigned char)(c)] & CBLANK)
+
+#define parserblank(c)	((c) == ' ' || (c) == '\t')
+
+#define issyntype(c, t)	((sh_syntaxtab[(unsigned char)(c)] & (t)) != 0)
+#define notsyntype(c,t) ((sh_syntaxtab[(unsigned char)(c)] & (t)) == 0)
+
+#if defined (PROCESS_SUBSTITUTION)
+#  define shellexp(c)	((c) == '$' || (c) == '<' || (c) == '>')
+#else
+#  define shellexp(c)	((c) == '$')
+#endif
+
+#if defined (EXTENDED_GLOB)
+#  define PATTERN_CHAR(c) \
+	((c) == '@' || (c) == '*' || (c) == '+' || (c) == '?' || (c) == '!')
+#else
+#  define PATTERN_CHAR(c) 0
+#endif
+
+#define GLOB_CHAR(c) \
+	((c) == '*' || (c) == '?' || (c) == '[' || (c) == ']' || (c) == '^')
+
+#define CTLESC '\001'
+#define CTLNUL '\177'
+
+#if !defined (HAVE_ISBLANK) && !defined (isblank)
+#  define isblank(x)	((x) == ' ' || (x) == '\t')
+#endif
+
+#endif /* _SYNTAX_H_ */
diff --git a/test.c b/test.c
new file mode 100644
index 0000000..e2fd78b
--- /dev/null
+++ b/test.c
@@ -0,0 +1,905 @@
+/* test.c - GNU test program (ksb and mjb) */
+
+/* Modified to run with the GNU shell Apr 25, 1988 by bfox. */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* Define PATTERN_MATCHING to get the csh-like =~ and !~ pattern-matching
+   binary operators. */
+/* #define PATTERN_MATCHING */
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#include <stdio.h>
+
+#include "bashtypes.h"
+
+#if !defined (HAVE_LIMITS_H) && defined (HAVE_SYS_PARAM_H)
+#  include <sys/param.h>
+#endif
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <errno.h>
+#if !defined (errno)
+extern int errno;
+#endif /* !errno */
+
+#if !defined (_POSIX_VERSION) && defined (HAVE_SYS_FILE_H)
+#  include <sys/file.h>
+#endif /* !_POSIX_VERSION */
+#include "posixstat.h"
+#include "filecntl.h"
+#include "stat-time.h"
+
+#include "bashintl.h"
+
+#include "shell.h"
+#include "pathexp.h"
+#include "test.h"
+#include "builtins/common.h"
+
+#include <glob/strmatch.h>
+
+#if !defined (STRLEN)
+#  define STRLEN(s) ((s)[0] ? ((s)[1] ? ((s)[2] ? strlen(s) : 2) : 1) : 0)
+#endif
+
+#if !defined (STREQ)
+#  define STREQ(a, b) ((a)[0] == (b)[0] && strcmp ((a), (b)) == 0)
+#endif /* !STREQ */
+#define STRCOLLEQ(a, b) ((a)[0] == (b)[0] && strcoll ((a), (b)) == 0)
+
+#if !defined (R_OK)
+#define R_OK 4
+#define W_OK 2
+#define X_OK 1
+#define F_OK 0
+#endif /* R_OK */
+
+#define EQ	0
+#define NE	1
+#define LT	2
+#define GT	3
+#define LE	4
+#define GE	5
+
+#define NT	0
+#define OT	1
+#define EF	2
+
+/* The following few defines control the truth and false output of each stage.
+   TRUE and FALSE are what we use to compute the final output value.
+   SHELL_BOOLEAN is the form which returns truth or falseness in shell terms.
+   Default is TRUE = 1, FALSE = 0, SHELL_BOOLEAN = (!value). */
+#define TRUE 1
+#define FALSE 0
+#define SHELL_BOOLEAN(value) (!(value))
+
+#define TEST_ERREXIT_STATUS	2
+
+static procenv_t test_exit_buf;
+static int test_error_return;
+#define test_exit(val) \
+	do { test_error_return = val; sh_longjmp (test_exit_buf, 1); } while (0)
+
+extern int sh_stat PARAMS((const char *, struct stat *));
+
+static int pos;		/* The offset of the current argument in ARGV. */
+static int argc;	/* The number of arguments present in ARGV. */
+static char **argv;	/* The argument list. */
+static int noeval;
+
+static void test_syntax_error PARAMS((char *, char *)) __attribute__((__noreturn__));
+static void beyond PARAMS((void)) __attribute__((__noreturn__));
+static void integer_expected_error PARAMS((char *)) __attribute__((__noreturn__));
+
+static int unary_operator PARAMS((void));
+static int binary_operator PARAMS((void));
+static int two_arguments PARAMS((void));
+static int three_arguments PARAMS((void));
+static int posixtest PARAMS((void));
+
+static int expr PARAMS((void));
+static int term PARAMS((void));
+static int and PARAMS((void));
+static int or PARAMS((void));
+
+static int filecomp PARAMS((char *, char *, int));
+static int arithcomp PARAMS((char *, char *, int, int));
+static int patcomp PARAMS((char *, char *, int));
+
+static void
+test_syntax_error (format, arg)
+     char *format, *arg;
+{
+  builtin_error (format, arg);
+  test_exit (TEST_ERREXIT_STATUS);
+}
+
+/*
+ * beyond - call when we're beyond the end of the argument list (an
+ *	error condition)
+ */
+static void
+beyond ()
+{
+  test_syntax_error (_("argument expected"), (char *)NULL);
+}
+
+/* Syntax error for when an integer argument was expected, but
+   something else was found. */
+static void
+integer_expected_error (pch)
+     char *pch;
+{
+  test_syntax_error (_("%s: integer expression expected"), pch);
+}
+
+/* Increment our position in the argument list.  Check that we're not
+   past the end of the argument list.  This check is suppressed if the
+   argument is FALSE.  Made a macro for efficiency. */
+#define advance(f) do { ++pos; if (f && pos >= argc) beyond (); } while (0)
+#define unary_advance() do { advance (1); ++pos; } while (0)
+
+/*
+ * expr:
+ *	or
+ */
+static int
+expr ()
+{
+  if (pos >= argc)
+    beyond ();
+
+  return (FALSE ^ or ());		/* Same with this. */
+}
+
+/*
+ * or:
+ *	and
+ *	and '-o' or
+ */
+static int
+or ()
+{
+  int value, v2;
+
+  value = and ();
+  if (pos < argc && argv[pos][0] == '-' && argv[pos][1] == 'o' && !argv[pos][2])
+    {
+      advance (0);
+      v2 = or ();
+      return (value || v2);
+    }
+
+  return (value);
+}
+
+/*
+ * and:
+ *	term
+ *	term '-a' and
+ */
+static int
+and ()
+{
+  int value, v2;
+
+  value = term ();
+  if (pos < argc && argv[pos][0] == '-' && argv[pos][1] == 'a' && !argv[pos][2])
+    {
+      advance (0);
+      v2 = and ();
+      return (value && v2);
+    }
+  return (value);
+}
+
+/*
+ * term - parse a term and return 1 or 0 depending on whether the term
+ *	evaluates to true or false, respectively.
+ *
+ * term ::=
+ *	'-'('a'|'b'|'c'|'d'|'e'|'f'|'g'|'h'|'k'|'p'|'r'|'s'|'u'|'w'|'x') filename
+ *	'-'('G'|'L'|'O'|'S'|'N') filename
+ * 	'-t' [int]
+ *	'-'('z'|'n') string
+ *	'-'('v'|'R') varname
+ *	'-o' option
+ *	string
+ *	string ('!='|'='|'==') string
+ *	<int> '-'(eq|ne|le|lt|ge|gt) <int>
+ *	file '-'(nt|ot|ef) file
+ *	'(' <expr> ')'
+ * int ::=
+ *	positive and negative integers
+ */
+static int
+term ()
+{
+  int value;
+
+  if (pos >= argc)
+    beyond ();
+
+  /* Deal with leading `not's. */
+  if (argv[pos][0] == '!' && argv[pos][1] == '\0')
+    {
+      value = 0;
+      while (pos < argc && argv[pos][0] == '!' && argv[pos][1] == '\0')
+	{
+	  advance (1);
+	  value = 1 - value;
+	}
+
+      return (value ? !term() : term());
+    }
+
+  /* A paren-bracketed argument. */
+  if (argv[pos][0] == '(' && argv[pos][1] == '\0') /* ) */
+    {
+      advance (1);
+      value = expr ();
+      if (argv[pos] == 0) /* ( */
+	test_syntax_error (_("`)' expected"), (char *)NULL);
+      else if (argv[pos][0] != ')' || argv[pos][1]) /* ( */
+	test_syntax_error (_("`)' expected, found %s"), argv[pos]);
+      advance (0);
+      return (value);
+    }
+
+  /* are there enough arguments left that this could be dyadic? */
+  if ((pos + 3 <= argc) && test_binop (argv[pos + 1]))
+    value = binary_operator ();
+
+  /* Might be a switch type argument -- make sure we have enough arguments for
+     the unary operator and argument */
+  else if ((pos + 2) <= argc && test_unop (argv[pos]))
+    value = unary_operator ();
+
+  else
+    {
+      value = argv[pos][0] != '\0';
+      advance (0);
+    }
+
+  return (value);
+}
+
+static int
+stat_mtime (fn, st, ts)
+     char *fn;
+     struct stat *st;
+     struct timespec *ts;
+{
+  int r;
+
+  r = sh_stat (fn, st);
+  if (r < 0)
+    return r;
+  *ts = get_stat_mtime (st);
+  return 0;
+}
+
+static int
+filecomp (s, t, op)
+     char *s, *t;
+     int op;
+{
+  struct stat st1, st2;
+  struct timespec ts1, ts2;
+  int r1, r2;
+
+  if ((r1 = stat_mtime (s, &st1, &ts1)) < 0)
+    {
+      if (op == EF)
+	return (FALSE);
+    }
+  if ((r2 = stat_mtime (t, &st2, &ts2)) < 0)
+    {
+      if (op == EF)
+	return (FALSE);
+    }
+  
+  switch (op)
+    {
+    case OT: return (r1 < r2 || (r2 == 0 && timespec_cmp (ts1, ts2) < 0));
+    case NT: return (r1 > r2 || (r1 == 0 && timespec_cmp (ts1, ts2) > 0));
+    case EF: return (same_file (s, t, &st1, &st2));
+    }
+  return (FALSE);
+}
+
+static int
+arithcomp (s, t, op, flags)
+     char *s, *t;
+     int op, flags;
+{
+  intmax_t l, r;
+  int expok;
+
+  if (flags & TEST_ARITHEXP)
+    {
+      l = evalexp (s, EXP_EXPANDED, &expok);
+      if (expok == 0)
+	return (FALSE);		/* should probably longjmp here */
+      r = evalexp (t, EXP_EXPANDED, &expok);
+      if (expok == 0)
+	return (FALSE);		/* ditto */
+    }
+  else
+    {
+      if (legal_number (s, &l) == 0)
+	integer_expected_error (s);
+      if (legal_number (t, &r) == 0)
+	integer_expected_error (t);
+    }
+
+  switch (op)
+    {
+    case EQ: return (l == r);
+    case NE: return (l != r);
+    case LT: return (l < r);
+    case GT: return (l > r);
+    case LE: return (l <= r);
+    case GE: return (l >= r);
+    }
+
+  return (FALSE);
+}
+
+static int
+patcomp (string, pat, op)
+     char *string, *pat;
+     int op;
+{
+  int m;
+
+  m = strmatch (pat, string, FNMATCH_EXTFLAG|FNMATCH_IGNCASE);
+  return ((op == EQ) ? (m == 0) : (m != 0));
+}
+
+int
+binary_test (op, arg1, arg2, flags)
+     char *op, *arg1, *arg2;
+     int flags;
+{
+  int patmatch;
+
+  patmatch = (flags & TEST_PATMATCH);
+
+  if (op[0] == '=' && (op[1] == '\0' || (op[1] == '=' && op[2] == '\0')))
+    return (patmatch ? patcomp (arg1, arg2, EQ) : STREQ (arg1, arg2));
+  else if ((op[0] == '>' || op[0] == '<') && op[1] == '\0')
+    {
+#if defined (HAVE_STRCOLL)
+      if (shell_compatibility_level > 40 && flags & TEST_LOCALE)
+	return ((op[0] == '>') ? (strcoll (arg1, arg2) > 0) : (strcoll (arg1, arg2) < 0));
+      else
+#endif
+	return ((op[0] == '>') ? (strcmp (arg1, arg2) > 0) : (strcmp (arg1, arg2) < 0));
+    }
+  else if (op[0] == '!' && op[1] == '=' && op[2] == '\0')
+    return (patmatch ? patcomp (arg1, arg2, NE) : (STREQ (arg1, arg2) == 0));
+    
+
+  else if (op[2] == 't')
+    {
+      switch (op[1])
+	{
+	case 'n': return (filecomp (arg1, arg2, NT));		/* -nt */
+	case 'o': return (filecomp (arg1, arg2, OT));		/* -ot */
+	case 'l': return (arithcomp (arg1, arg2, LT, flags));	/* -lt */
+	case 'g': return (arithcomp (arg1, arg2, GT, flags));	/* -gt */
+	}
+    }
+  else if (op[1] == 'e')
+    {
+      switch (op[2])
+	{
+	case 'f': return (filecomp (arg1, arg2, EF));		/* -ef */
+	case 'q': return (arithcomp (arg1, arg2, EQ, flags));	/* -eq */
+	}
+    }
+  else if (op[2] == 'e')
+    {
+      switch (op[1])
+	{
+	case 'n': return (arithcomp (arg1, arg2, NE, flags));	/* -ne */
+	case 'g': return (arithcomp (arg1, arg2, GE, flags));	/* -ge */
+	case 'l': return (arithcomp (arg1, arg2, LE, flags));	/* -le */
+	}
+    }
+
+  return (FALSE);	/* should never get here */
+}
+
+
+static int
+binary_operator ()
+{
+  int value;
+  char *w;
+
+  w = argv[pos + 1];
+  if ((w[0] == '=' && (w[1] == '\0' || (w[1] == '=' && w[2] == '\0'))) || /* =, == */
+      ((w[0] == '>' || w[0] == '<') && w[1] == '\0') ||		/* <, > */
+      (w[0] == '!' && w[1] == '=' && w[2] == '\0'))		/* != */
+    {
+      value = binary_test (w, argv[pos], argv[pos + 2], 0);
+      pos += 3;
+      return (value);
+    }
+
+#if defined (PATTERN_MATCHING)
+  if ((w[0] == '=' || w[0] == '!') && w[1] == '~' && w[2] == '\0')
+    {
+      value = patcomp (argv[pos], argv[pos + 2], w[0] == '=' ? EQ : NE);
+      pos += 3;
+      return (value);
+    }
+#endif
+
+  if ((w[0] != '-' || w[3] != '\0') || test_binop (w) == 0)
+    {
+      test_syntax_error (_("%s: binary operator expected"), w);
+      /* NOTREACHED */
+      return (FALSE);
+    }
+
+  value = binary_test (w, argv[pos], argv[pos + 2], 0);
+  pos += 3;
+  return value;
+}
+
+static int
+unary_operator ()
+{
+  char *op;
+  intmax_t r;
+
+  op = argv[pos];
+  if (test_unop (op) == 0)
+    return (FALSE);
+
+  /* the only tricky case is `-t', which may or may not take an argument. */
+  if (op[1] == 't')
+    {
+      advance (0);
+      if (pos < argc)
+	{
+	  if (legal_number (argv[pos], &r))
+	    {
+	      advance (0);
+	      return (unary_test (op, argv[pos - 1]));
+	    }
+	  else
+	    return (FALSE);
+	}
+      else
+	return (unary_test (op, "1"));
+    }
+
+  /* All of the unary operators take an argument, so we first call
+     unary_advance (), which checks to make sure that there is an
+     argument, and then advances pos right past it.  This means that
+     pos - 1 is the location of the argument. */
+  unary_advance ();
+  return (unary_test (op, argv[pos - 1]));
+}
+
+int
+unary_test (op, arg)
+     char *op, *arg;
+{
+  intmax_t r;
+  struct stat stat_buf;
+  struct timespec mtime, atime;
+  SHELL_VAR *v;
+     
+  switch (op[1])
+    {
+    case 'a':			/* file exists in the file system? */
+    case 'e':
+      return (sh_stat (arg, &stat_buf) == 0);
+
+    case 'r':			/* file is readable? */
+      return (sh_eaccess (arg, R_OK) == 0);
+
+    case 'w':			/* File is writeable? */
+      return (sh_eaccess (arg, W_OK) == 0);
+
+    case 'x':			/* File is executable? */
+      return (sh_eaccess (arg, X_OK) == 0);
+
+    case 'O':			/* File is owned by you? */
+      return (sh_stat (arg, &stat_buf) == 0 &&
+	      (uid_t) current_user.euid == (uid_t) stat_buf.st_uid);
+
+    case 'G':			/* File is owned by your group? */
+      return (sh_stat (arg, &stat_buf) == 0 &&
+	      (gid_t) current_user.egid == (gid_t) stat_buf.st_gid);
+
+    case 'N':
+      if (sh_stat (arg, &stat_buf) < 0)
+	return (FALSE);
+      atime = get_stat_atime (&stat_buf);
+      mtime = get_stat_mtime (&stat_buf);
+      return (timespec_cmp (mtime, atime) > 0);
+
+    case 'f':			/* File is a file? */
+      if (sh_stat (arg, &stat_buf) < 0)
+	return (FALSE);
+
+      /* -f is true if the given file exists and is a regular file. */
+#if defined (S_IFMT)
+      return (S_ISREG (stat_buf.st_mode) || (stat_buf.st_mode & S_IFMT) == 0);
+#else
+      return (S_ISREG (stat_buf.st_mode));
+#endif /* !S_IFMT */
+
+    case 'd':			/* File is a directory? */
+      return (sh_stat (arg, &stat_buf) == 0 && (S_ISDIR (stat_buf.st_mode)));
+
+    case 's':			/* File has something in it? */
+      return (sh_stat (arg, &stat_buf) == 0 && stat_buf.st_size > (off_t) 0);
+
+    case 'S':			/* File is a socket? */
+#if !defined (S_ISSOCK)
+      return (FALSE);
+#else
+      return (sh_stat (arg, &stat_buf) == 0 && S_ISSOCK (stat_buf.st_mode));
+#endif /* S_ISSOCK */
+
+    case 'c':			/* File is character special? */
+      return (sh_stat (arg, &stat_buf) == 0 && S_ISCHR (stat_buf.st_mode));
+
+    case 'b':			/* File is block special? */
+      return (sh_stat (arg, &stat_buf) == 0 && S_ISBLK (stat_buf.st_mode));
+
+    case 'p':			/* File is a named pipe? */
+#ifndef S_ISFIFO
+      return (FALSE);
+#else
+      return (sh_stat (arg, &stat_buf) == 0 && S_ISFIFO (stat_buf.st_mode));
+#endif /* S_ISFIFO */
+
+    case 'L':			/* Same as -h  */
+    case 'h':			/* File is a symbolic link? */
+#if !defined (S_ISLNK) || !defined (HAVE_LSTAT)
+      return (FALSE);
+#else
+      return ((arg[0] != '\0') &&
+	      (lstat (arg, &stat_buf) == 0) && S_ISLNK (stat_buf.st_mode));
+#endif /* S_IFLNK && HAVE_LSTAT */
+
+    case 'u':			/* File is setuid? */
+      return (sh_stat (arg, &stat_buf) == 0 && (stat_buf.st_mode & S_ISUID) != 0);
+
+    case 'g':			/* File is setgid? */
+      return (sh_stat (arg, &stat_buf) == 0 && (stat_buf.st_mode & S_ISGID) != 0);
+
+    case 'k':			/* File has sticky bit set? */
+#if !defined (S_ISVTX)
+      /* This is not Posix, and is not defined on some Posix systems. */
+      return (FALSE);
+#else
+      return (sh_stat (arg, &stat_buf) == 0 && (stat_buf.st_mode & S_ISVTX) != 0);
+#endif
+
+    case 't':	/* File fd is a terminal? */
+      if (legal_number (arg, &r) == 0)
+	return (FALSE);
+      return ((r == (int)r) && isatty ((int)r));
+
+    case 'n':			/* True if arg has some length. */
+      return (arg[0] != '\0');
+
+    case 'z':			/* True if arg has no length. */
+      return (arg[0] == '\0');
+
+    case 'o':			/* True if option `arg' is set. */
+      return (minus_o_option_value (arg) == 1);
+
+    case 'v':
+#if defined (ARRAY_VARS)
+      if (valid_array_reference (arg, 0))
+	{
+	  char *t;
+	  int rtype, ret, flags;
+
+	  /* Let's assume that this has already been expanded once. */
+	  flags = assoc_expand_once ? AV_NOEXPAND : 0;
+	  t = array_value (arg, 0, flags, &rtype, (arrayind_t *)0);
+	  ret = t ? TRUE : FALSE;
+	  if (rtype > 0)	/* subscript is * or @ */
+	    free (t);
+	  return ret;
+	}
+      else if (legal_number (arg, &r))		/* -v n == is $n set? */
+	return ((r >= 0 && r <= number_of_args()) ? TRUE : FALSE);
+      v = find_variable (arg);
+      if (v && invisible_p (v) == 0 && array_p (v))
+	{
+	  char *t;
+	  /* [[ -v foo ]] == [[ -v foo[0] ]] */
+	  t = array_reference (array_cell (v), 0);
+	  return (t ? TRUE : FALSE);
+	}
+      else if (v && invisible_p (v) == 0 && assoc_p (v))
+	{
+	  char *t;
+	  t = assoc_reference (assoc_cell (v), "0");
+	  return (t ? TRUE : FALSE);
+	}
+#else
+      v = find_variable (arg);
+#endif
+      return (v && invisible_p (v) == 0 && var_isset (v) ? TRUE : FALSE);
+
+    case 'R':
+      v = find_variable_noref (arg);
+      return ((v && invisible_p (v) == 0 && var_isset (v) && nameref_p (v)) ? TRUE : FALSE);
+    }
+
+  /* We can't actually get here, but this shuts up gcc. */
+  return (FALSE);
+}
+
+/* Return TRUE if OP is one of the test command's binary operators. */
+int
+test_binop (op)
+     char *op;
+{
+  if (op[0] == '=' && op[1] == '\0')
+    return (1);		/* '=' */
+  else if ((op[0] == '<' || op[0] == '>') && op[1] == '\0')  /* string <, > */
+    return (1);
+  else if ((op[0] == '=' || op[0] == '!') && op[1] == '=' && op[2] == '\0')
+    return (1);		/* `==' and `!=' */
+#if defined (PATTERN_MATCHING)
+  else if (op[2] == '\0' && op[1] == '~' && (op[0] == '=' || op[0] == '!'))
+    return (1);
+#endif
+  else if (op[0] != '-' || op[1] == '\0' || op[2] == '\0' || op[3] != '\0')
+    return (0);
+  else
+    {
+      if (op[2] == 't')
+	switch (op[1])
+	  {
+	  case 'n':		/* -nt */
+	  case 'o':		/* -ot */
+	  case 'l':		/* -lt */
+	  case 'g':		/* -gt */
+	    return (1);
+	  default:
+	    return (0);
+	  }
+      else if (op[1] == 'e')
+	switch (op[2])
+	  {
+	  case 'q':		/* -eq */
+	  case 'f':		/* -ef */
+	    return (1);
+	  default:
+	    return (0);
+	  }
+      else if (op[2] == 'e')
+	switch (op[1])
+	  {
+	  case 'n':		/* -ne */
+	  case 'g':		/* -ge */
+	  case 'l':		/* -le */
+	    return (1);
+	  default:
+	    return (0);
+	  }
+      else
+	return (0);
+    }
+}
+
+/* Return non-zero if OP is one of the test command's unary operators. */
+int
+test_unop (op)
+     char *op;
+{
+  if (op[0] != '-' || (op[1] && op[2] != 0))
+    return (0);
+
+  switch (op[1])
+    {
+    case 'a': case 'b': case 'c': case 'd': case 'e':
+    case 'f': case 'g': case 'h': case 'k': case 'n':
+    case 'o': case 'p': case 'r': case 's': case 't':
+    case 'u': case 'v': case 'w': case 'x': case 'z':
+    case 'G': case 'L': case 'O': case 'S': case 'N':
+    case 'R':
+      return (1);
+    }
+
+  return (0);
+}
+
+static int
+two_arguments ()
+{
+  if (argv[pos][0] == '!' && argv[pos][1] == '\0')
+    return (argv[pos + 1][0] == '\0');
+  else if (argv[pos][0] == '-' && argv[pos][1] && argv[pos][2] == '\0')
+    {
+      if (test_unop (argv[pos]))
+	return (unary_operator ());
+      else
+	test_syntax_error (_("%s: unary operator expected"), argv[pos]);
+    }
+  else
+    test_syntax_error (_("%s: unary operator expected"), argv[pos]);
+
+  return (0);
+}
+
+#define ANDOR(s)  (s[0] == '-' && (s[1] == 'a' || s[1] == 'o') && s[2] == 0)
+
+/* This could be augmented to handle `-t' as equivalent to `-t 1', but
+   POSIX requires that `-t' be given an argument. */
+#define ONE_ARG_TEST(s)		((s)[0] != '\0')
+
+static int
+three_arguments ()
+{
+  int value;
+
+  if (test_binop (argv[pos+1]))
+    {
+      value = binary_operator ();
+      pos = argc;
+    }
+  else if (ANDOR (argv[pos+1]))
+    {
+      if (argv[pos+1][1] == 'a')
+	value = ONE_ARG_TEST(argv[pos]) && ONE_ARG_TEST(argv[pos+2]);
+      else
+	value = ONE_ARG_TEST(argv[pos]) || ONE_ARG_TEST(argv[pos+2]);
+      pos = argc;
+    }
+  else if (argv[pos][0] == '!' && argv[pos][1] == '\0')
+    {
+      advance (1);
+      value = !two_arguments ();
+    }
+  else if (argv[pos][0] == '(' && argv[pos+2][0] == ')')
+    {
+      value = ONE_ARG_TEST(argv[pos+1]);
+      pos = argc;
+    }
+  else
+    test_syntax_error (_("%s: binary operator expected"), argv[pos+1]);
+
+  return (value);
+}
+
+/* This is an implementation of a Posix.2 proposal by David Korn. */
+static int
+posixtest ()
+{
+  int value;
+
+  switch (argc - 1)	/* one extra passed in */
+    {
+      case 0:
+	value = FALSE;
+	pos = argc;
+	break;
+
+      case 1:
+	value = ONE_ARG_TEST(argv[1]);
+	pos = argc;
+	break;
+
+      case 2:
+	value = two_arguments ();
+	pos = argc;
+	break;
+
+      case 3:
+	value = three_arguments ();
+	break;
+
+      case 4:
+	if (argv[pos][0] == '!' && argv[pos][1] == '\0')
+	  {
+	    advance (1);
+	    value = !three_arguments ();
+	    break;
+	  }
+	else if (argv[pos][0] == '(' && argv[pos][1] == '\0' && argv[argc-1][0] == ')' && argv[argc-1][1] == '\0')
+	  {
+	    advance (1);
+	    value = two_arguments ();
+	    pos = argc;
+	    break;
+	  }
+	/* FALLTHROUGH */
+      default:
+	value = expr ();
+    }
+
+  return (value);
+}
+
+/*
+ * [:
+ *	'[' expr ']'
+ * test:
+ *	test expr
+ */
+int
+test_command (margc, margv)
+     int margc;
+     char **margv;
+{
+  int value;
+  int code;
+
+  USE_VAR(margc);
+
+  code = setjmp_nosigs (test_exit_buf);
+
+  if (code)
+    return (test_error_return);
+
+  argv = margv;
+
+  if (margv[0] && margv[0][0] == '[' && margv[0][1] == '\0')
+    {
+      --margc;
+
+      if (margv[margc] && (margv[margc][0] != ']' || margv[margc][1]))
+	test_syntax_error (_("missing `]'"), (char *)NULL);
+
+      if (margc < 2)
+	test_exit (SHELL_BOOLEAN (FALSE));
+    }
+
+  argc = margc;
+  pos = 1;
+
+  if (pos >= argc)
+    test_exit (SHELL_BOOLEAN (FALSE));
+
+  noeval = 0;
+  value = posixtest ();
+
+  if (pos != argc)
+    {
+      if (pos < argc && argv[pos][0] == '-')
+	test_syntax_error (_("syntax error: `%s' unexpected"), argv[pos]);
+      else
+	test_syntax_error (_("too many arguments"), (char *)NULL);
+    }
+
+  test_exit (SHELL_BOOLEAN (value));
+}
diff --git a/test.h b/test.h
new file mode 100644
index 0000000..ea3c33e
--- /dev/null
+++ b/test.h
@@ -0,0 +1,39 @@
+/* test.h -- external interface to the conditional command code. */
+
+/* Copyright (C) 1997-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _TEST_H_
+#define _TEST_H_
+
+#include "stdc.h"
+
+/* Values for the flags argument to binary_test */
+#define TEST_PATMATCH	0x01
+#define TEST_ARITHEXP	0x02
+#define TEST_LOCALE	0x04
+
+extern int test_unop PARAMS((char *));
+extern int test_binop PARAMS((char *));
+
+extern int unary_test PARAMS((char *, char *));
+extern int binary_test PARAMS((char *, char *, char *, int));
+
+extern int test_command PARAMS((int, char **));
+
+#endif /* _TEST_H_ */
diff --git a/tests/COPYRIGHT b/tests/COPYRIGHT
new file mode 100644
index 0000000..43b39df
--- /dev/null
+++ b/tests/COPYRIGHT
@@ -0,0 +1,9 @@
+Unless otherwise stated, all files in this directory are Copyright (C)
+1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,
+2004,2005,2006,2007,2008,2009,2010,2011
+Free Software Foundation, Inc.
+
+See the file COPYING in the bash distribution root directory for copying
+and usage restrictions.
+
+The file ifs-posix.tests is Copyright (C) 2005 Glen Fowler.
diff --git a/tests/README b/tests/README
new file mode 100644
index 0000000..b023ef6
--- /dev/null
+++ b/tests/README
@@ -0,0 +1,3 @@
+Type `sh run-all'.
+
+Read COPYRIGHT for copyright information.
diff --git a/tests/alias.right b/tests/alias.right
new file mode 100644
index 0000000..9e33036
--- /dev/null
+++ b/tests/alias.right
@@ -0,0 +1,42 @@
+alias: 0
+alias: 0
+./alias.tests: line 38: qfoo: command not found
+quux
+bar
+value
+bar
+value
+OK
+OK
+OK
+OK
+one
+two
+three
+four
+one
+two
+three
+four
+Error: bar
+ok 1
+ok 2
+text
+whoops:  nullalias
+foo
+a
+a b
+a b
+a a b
+ok 3
+ok 4
+bar
+bad
+0
+<|cat>
+foo
+bar
+baz
+foo
+bar
+baz
diff --git a/tests/alias.tests b/tests/alias.tests
new file mode 100644
index 0000000..0280c16
--- /dev/null
+++ b/tests/alias.tests
@@ -0,0 +1,56 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# place holder for future alias testing
+shopt -s expand_aliases
+
+# alias/unalias tests originally in builtins.tests
+
+unalias -a
+# this should return success, according to POSIX.2
+alias
+echo alias: $?
+alias foo=bar
+unalias foo
+# this had better return success, according to POSIX.2
+alias
+echo alias: $?
+
+# bug in all versions through bash-2.05b
+
+unalias qfoo qbar qbaz quux 2>/dev/null
+
+alias qfoo=qbar
+alias qbar=qbaz
+alias qbaz=quux
+alias quux=qfoo
+
+qfoo
+
+unalias qfoo qbar qbaz quux
+
+unalias -a
+
+alias foo='echo '
+alias bar=baz
+alias baz=quux
+
+foo bar
+
+unalias foo bar baz
+
+${THIS_SH} ./alias1.sub
+${THIS_SH} ./alias2.sub
+${THIS_SH} ./alias3.sub
+${THIS_SH} ./alias4.sub
+${THIS_SH} ./alias5.sub
diff --git a/tests/alias1.sub b/tests/alias1.sub
new file mode 100644
index 0000000..9a90b2e
--- /dev/null
+++ b/tests/alias1.sub
@@ -0,0 +1,33 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+shopt -s expand_aliases
+
+alias foo=echo
+
+< /dev/null foo bar
+
+< /dev/null x=value
+echo $x
+
+< /dev/null x=newvalue foo bar
+echo $x
+
+# problem reported by Vincent Lefevre
+alias a="echo OK >&2"
+a
+> /dev/null a
+
+${THIS_SH} -c 'shopt -s expand_aliases; alias a="echo OK >&2"
+ a
+ > /dev/null a'
diff --git a/tests/alias2.sub b/tests/alias2.sub
new file mode 100644
index 0000000..e35fb76
--- /dev/null
+++ b/tests/alias2.sub
@@ -0,0 +1,35 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+THIS=alias2
+FN=$TMPDIR/$THIS.script
+
+cat > $FN <<'EOF'
+#
+(echo "$1")
+EOF
+chmod u+x $FN
+
+shopt -s expand_aliases
+
+alias foo1='$FN one; source $FN two; source $FN three; $FN four'
+
+alias foo2='$FN one
+source $FN two
+source $FN three
+$FN four'
+
+foo1
+foo2
+
+rm -f $FN
diff --git a/tests/alias3.sub b/tests/alias3.sub
new file mode 100644
index 0000000..304e926
--- /dev/null
+++ b/tests/alias3.sub
@@ -0,0 +1,11 @@
+shopt -s expand_aliases
+alias foo='oneword'
+foo_word='foo'
+#
+# Fails silently to match 'foo':
+#
+case "$foo_word"
+in
+	foo) ;;
+	*) echo bad 1;;
+esac
diff --git a/tests/alias4.sub b/tests/alias4.sub
new file mode 100644
index 0000000..0864a3c
--- /dev/null
+++ b/tests/alias4.sub
@@ -0,0 +1,100 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+shopt -s expand_aliases
+
+# from an austin-group report
+alias foo="echo 'Error:"
+foo bar'
+
+# from some FreeBSD sh tests
+
+v=1
+alias a='unalias -a
+v=2'
+eval a
+[ "$v" = 2 ] && echo ok 1
+v=1
+alias a='unalias a
+v=2'
+eval a
+[ "$v" = 2 ] && echo ok 2
+
+# make sure command doesn't ever reset anything even if it's made a keyword
+unalias -a
+alias command=command
+alias true='echo bad'
+eval 'command true'
+
+unalias -a
+alias alias0=command
+alias true='echo bad'
+eval 'alias0 true'
+
+# make sure null aliases are ok
+unalias -a
+alias nullalias=''
+alias foo='echo '
+foo nullalias text
+unalias foo
+
+# aliases shouldn't be expanded in quoted strings even when the previous word
+# is an alias whose expansion ends in a space
+alias foo="echo 'whoops: "
+foo nullalias'
+
+unalias -a
+
+# recursive alias definitions
+alias echo=echo
+eval echo foo
+
+alias echo='echo a'
+
+echo
+echo b
+eval echo b
+echo $(eval echo b)
+
+unalias -a
+
+# alias expansion when in a command position after redirections
+alias e=echo
+eval '</dev/null e ok 3'
+eval 'a=true e ok 4'
+
+alias comment=#
+comment
+
+alias long_comment='# for x in '
+long_comment text after
+
+# comment
+comment foo bar
+
+# alias ending in a tab
+alias foo="\
+	echo \"bar\" \
+	"
+
+foo
+
+alias foo=$'echo bad \t'
+foo
+
+# this should probably just echo a blank line to stdout
+alias foo='echo 0'
+foo>&2
+
+alias a='printf "<%s>\n" \'
+a|cat
diff --git a/tests/alias5.sub b/tests/alias5.sub
new file mode 100644
index 0000000..7f8e86d
--- /dev/null
+++ b/tests/alias5.sub
@@ -0,0 +1,28 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# -c commands ending with multi-line aliases; post-bash-5.0
+
+: ${THIS_SH:=./bash}
+
+${THIS_SH} -c "shopt -s expand_aliases &>/dev/null;
+alias myalias='/bin/echo foo
+echo bar
+echo baz'
+myalias"
+
+${THIS_SH} -c "shopt -s expand_aliases &>/dev/null;
+alias myalias='echo foo
+echo bar
+echo baz'
+myalias"
diff --git a/tests/appendop.right b/tests/appendop.right
new file mode 100644
index 0000000..f72696b
--- /dev/null
+++ b/tests/appendop.right
@@ -0,0 +1,28 @@
+14
+1 2 3 4 5 6
+1 2 3 4 51 6
+145
+14
+7
+42
+1 2 3 4 12
+18
+1 2 3 4 18
+1 2 7 4 5
+1 2 7 13 5 9
+14
+9
+4
+9
+16
+./appendop.tests: line 97: x: readonly variable
+declare -A foo=([two]="baz" [three]="quux" [one]="bar" )
+declare -A foo=([0]="zero" [two]="baz" [three]="quux" [one]="bar" )
+declare -A foo=([four]="four" [0]="zero" [two]="baz" [three]="quux" [one]="bar" )
+declare -ai iarr=([0]="3" [1]="2" [2]="3")
+declare -ai iarr=([0]="3" [1]="2" [2]="3" [3]="4" [4]="5" [5]="6")
+25 25
+7 7
+14
+145
+145 145
diff --git a/tests/appendop.tests b/tests/appendop.tests
new file mode 100644
index 0000000..61b38fc
--- /dev/null
+++ b/tests/appendop.tests
@@ -0,0 +1,100 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# basic cases
+a=1
+a+=4
+echo $a
+
+x=(1 2 3)
+x+=(4 5 6)
+
+echo ${x[@]}
+
+x[4]+=1
+echo ${x[@]}
+
+# trickier cases
+# post-bash-4.2: bash understands += in environment assignments preceding
+# command names
+a+=5 printenv a
+echo $a
+
+# if the integer flag is set, ksh93 appears to do arithmetic += and evaluate
+# old value as an arithmetic expression
+a=
+typeset -i a
+a+=7
+echo $a
+
+b=4+1
+typeset -i b
+b+=37
+
+echo $b
+
+unset x
+x=(1 2 3 4 5)
+
+typeset -i x
+
+x[4]+=7
+
+echo ${x[@]}
+
+unset x
+typeset -i x
+
+x=([0]=7+11)
+echo ${x[@]}
+
+unset x
+x=(1 2 3 4 5)
+
+typeset -i x
+
+#x[4]=7+11
+
+x=(1 2 3 4 [4]=7+11 )
+echo ${x[@]}
+
+x=( 1 2 [2]+=7 4 5 )
+echo ${x[@]}
+
+x+=( [3]+=9 [5]=9 )
+echo ${x[@]}
+
+unset a
+a=1
+export a+=4
+printenv a
+printenv a+
+
+unset x
+typeset -i x=4+5
+echo $x
+
+unset x
+typeset x+=4
+echo $x
+
+typeset -i x+=5
+echo $x
+
+readonly x+=7
+echo $x
+
+x+=5
+
+${THIS_SH} ./appendop1.sub
+${THIS_SH} ./appendop2.sub
diff --git a/tests/appendop1.sub b/tests/appendop1.sub
new file mode 100644
index 0000000..60e7014
--- /dev/null
+++ b/tests/appendop1.sub
@@ -0,0 +1,28 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+typeset -A foo=([one]=bar [two]=baz [three]=quux)
+typeset -p foo
+
+foo+=zero
+typeset -p foo
+
+foo+=([four]=four)
+typeset -p foo
+
+typeset -ia iarr=(2 2 3)
+iarr+=1
+typeset -p iarr
+
+iarr+=(4 5 6)
+typeset -p iarr
diff --git a/tests/appendop2.sub b/tests/appendop2.sub
new file mode 100644
index 0000000..e497beb
--- /dev/null
+++ b/tests/appendop2.sub
@@ -0,0 +1,31 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+POSIXLY_CORRECT=1
+x=2
+x+=5 eval printf '"$x "'
+echo "$x"
+
+unset x
+typeset -i x=2
+x+=5 eval printf '"$x "'
+echo "$x"
+
+a=1
+a+=4
+echo $a
+
+# idiotically, ksh93 makes these two cases differ (?)
+a+=5 printenv a
+a+=5 eval printf '"$a "'
+echo $a
diff --git a/tests/arith-for.right b/tests/arith-for.right
new file mode 100644
index 0000000..06127be
--- /dev/null
+++ b/tests/arith-for.right
@@ -0,0 +1,86 @@
+0
+1
+2
+0
+1
+2
+0
+1
+2
+0
+2
+4
+fx is a function
+fx () 
+{ 
+    i=0;
+    for ((1; i < 3; i++ ))
+    do
+        echo $i;
+    done;
+    for ((i=0; 1; i++ ))
+    do
+        if (( i >= 3 )); then
+            break;
+        fi;
+        echo $i;
+    done;
+    for ((i=0; i<3; 1))
+    do
+        echo $i;
+        (( i++ ));
+    done;
+    i=0;
+    for ((1; 1; 1))
+    do
+        if (( i > 2 )); then
+            break;
+        fi;
+        echo $i;
+        (( i++ ));
+    done;
+    i=0;
+    for ((1; 1; 1))
+    do
+        if (( i > 2 )); then
+            break;
+        fi;
+        echo $i;
+        (( i++ ));
+    done
+}
+0
+1
+2
+0
+1
+2
+0
+1
+2
+0
+1
+2
+0
+1
+2
+bash: -c: line 1: syntax error: arithmetic expression required
+bash: -c: line 1: syntax error: `(( i=0; "i < 3" ))'
+2
+bash: -c: line 1: syntax error: `;' unexpected
+bash: -c: line 1: syntax error: `(( i=0; i < 3; i++; 7 ))'
+2
+20
+20
+12345678 987654321 012345678 987654321 012345678 987654321 012345678 987654321 012345678 987654321 012345678 
+12345678 987654321 012345678 987654321 012345678 987654321 012345678 987654321 012345678 987654321 012345678 
+4
+3
+2
+1
+0
+4
+3
+2
+1
+0
diff --git a/tests/arith-for.tests b/tests/arith-for.tests
new file mode 100644
index 0000000..db913da
--- /dev/null
+++ b/tests/arith-for.tests
@@ -0,0 +1,128 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+fx()
+{
+i=0
+for (( ; i < 3; i++ ))
+do
+	echo $i
+done
+
+for (( i=0; ; i++ ))
+do
+	if (( i >= 3 )); then
+		break;
+	fi
+	echo $i
+done
+
+for (( i=0; i<3; ))
+do
+	echo $i
+	(( i++ ))
+done
+
+i=0
+for (( ; ; ))
+do
+	if (( i > 2 )); then
+		break;
+	fi
+	echo $i;
+	(( i++ ))
+done
+
+i=0
+for ((;;))
+do
+	if (( i > 2 )); then
+		break;
+	fi
+	echo $i;
+	(( i++ ))
+done
+}
+
+for (( i=0; "i < 3" ; i++ ))
+do
+	echo $i
+done
+
+i=0
+for (( ; "i < 3"; i++ ))
+do
+	echo $i
+done
+
+for (( i=0; ; i++ ))
+do
+	if (( i >= 3 )); then
+		break;
+	fi
+	echo $i
+done
+
+for ((i = 0; ;i++ ))
+do
+	echo $i
+	if (( i < 3 )); then
+		(( i++ ))
+		continue;
+	fi
+	break
+done
+
+type fx
+fx
+
+# errors 
+{
+${THIS_SH} -c 'for (( i=0; "i < 3" ))
+do
+	echo $i
+done' ; echo $? ;  } 2>&1 | sed 's|^.*/||'
+#echo $?
+
+{
+${THIS_SH} -c 'for (( i=0; i < 3; i++; 7 ))
+do
+	echo $i
+done' ; echo $?; } 2>&1 | sed 's|^.*/||'
+#echo $?
+
+# one-liners added in post-bash-2.04
+for     ((i=0; i < 20; i++)) do : ; done
+echo $i
+
+for     ((i=0; i < 20; i++)) { : ; }
+echo $i
+
+# added post-bash-4.2
+for (( i = j = k = 1; i % 9 || (j *= -1, $( ((i%9)) || printf " " >&2; echo 0), k++ <= 10); i += j ))
+do
+printf "$i"
+done
+
+echo
+
+( for (( i = j = k = 1; i % 9 || (j *= -1, $( ((i%9)) || printf " " >&2; echo 0), k++ <= 10); i += j ))
+do
+printf "$i"
+done )
+
+echo
+
+for (( i = 4; ;i--)) ; do echo $i; if (( $i == 0 )); then break; fi; done
+
+for (( i = 4;;i--)) ; do echo $i; if (( $i == 0 )); then break; fi; done
diff --git a/tests/arith.right b/tests/arith.right
new file mode 100644
index 0000000..c74602e
--- /dev/null
+++ b/tests/arith.right
@@ -0,0 +1,263 @@
+163
+166
+4
+16
+8
+2
+4
+2
+2
+1
+0
+0
+0
+1
+1
+2
+-3
+-2
+1
+0
+2
+131072
+29
+33
+49
+1
+1
+0
+0
+1
+1
+1
+2
+3
+1
+58
+2
+60
+1
+256
+16
+62
+4
+29
+5
+-4
+4
+1
+32
+32
+1
+1
+32
+4
+20
+1,i+=2
+30
+1,j+=2
+20
+1,i+=2
+30
+1,j+=2
+./arith.tests: line 127: 1 ? 20 : x+=2: attempted assignment to non-variable (error token is "+=2")
+20
+6
+6,5,3
+263
+255
+255
+127
+36
+40
+10
+10
+10
+10
+10
+10
+36
+36
+62
+63
+./arith.tests: line 162: 3425#56: invalid arithmetic base (error token is "3425#56")
+./arith.tests: line 165: 2#: invalid integer constant (error token is "2#")
+./arith.tests: line 168: 7 = 43 : attempted assignment to non-variable (error token is "= 43 ")
+./arith.tests: line 169: 2#44: value too great for base (error token is "2#44")
+./arith.tests: line 170: 44 / 0 : division by 0 (error token is "0 ")
+./arith.tests: line 171: let: jv += $iv: syntax error: operand expected (error token is "$iv")
+./arith.tests: line 172: jv += $iv : syntax error: operand expected (error token is "$iv ")
+./arith.tests: line 173: let: rv = 7 + (43 * 6: missing `)' (error token is "6")
+./arith.tests: line 177: 0#4: invalid number (error token is "0#4")
+./arith.tests: line 178: 2#110#11: invalid number (error token is "2#110#11")
+abc
+def
+ghi
+ok
+6
+1
+0
+./arith.tests: line 196: 4 + : syntax error: operand expected (error token is "+ ")
+16
+./arith.tests: line 201: 4 ? : 3 + 5 : expression expected (error token is ": 3 + 5 ")
+./arith.tests: line 202: 1 ? 20 : `:' expected for conditional expression (error token is "20 ")
+./arith.tests: line 203: 4 ? 20 : : expression expected (error token is ": ")
+9
+./arith.tests: line 209: 0 && B=42 : attempted assignment to non-variable (error token is "=42 ")
+9
+./arith.tests: line 212: 1 || B=88 : attempted assignment to non-variable (error token is "=88 ")
+9
+0
+9
+0
+9
+1
+9
+7
+7
+4
+32767
+32768
+131072
+2147483647
+1
+4
+4
+5
+5
+4
+3
+3
+4
+4
+7
+./arith.tests: line 260: 7-- : syntax error: operand expected (error token is "- ")
+./arith.tests: line 262: --x=7 : attempted assignment to non-variable (error token is "=7 ")
+./arith.tests: line 263: ++x=7 : attempted assignment to non-variable (error token is "=7 ")
+./arith.tests: line 265: x++=7 : attempted assignment to non-variable (error token is "=7 ")
+./arith.tests: line 266: x--=7 : attempted assignment to non-variable (error token is "=7 ")
+4
+7
+-7
+7
+7
+2
+2
+./arith1.sub: line 15: 4-- : syntax error: operand expected (error token is "- ")
+./arith1.sub: line 16: 4++ : syntax error: operand expected (error token is "+ ")
+./arith1.sub: line 17: 4 -- : syntax error: operand expected (error token is "- ")
+./arith1.sub: line 18: 4 ++ : syntax error: operand expected (error token is "+ ")
+1
+2
+1
+2
+6
+3
+7
+4
+0
+3
+7
+2
+-2
+1
+./arith1.sub: line 48: ((: ++ : syntax error: operand expected (error token is "+ ")
+7
+7
+./arith1.sub: line 51: ((: -- : syntax error: operand expected (error token is "- ")
+7
+7
+7
+7
+1
+2
+1
+2
+1
+0
+5
+1
+6
+2
+3
+1
+4
+0
+./arith2.sub: line 46: ((: -- : syntax error: operand expected (error token is "- ")
+-7
+-7
+./arith2.sub: line 50: ((: ++ : syntax error: operand expected (error token is "+ ")
+7
+7
+-7
+-7
+7
+7
+1
+1
+4
+5
+-3
+2
+4
+5000
+5000
+1
+0
+0
+1
+2147483649
+0
+0
+0
+0
+0
+0
+-9223372036854775808
+-9223372036854775808
+-9223372036854775808
+-9223372036854775808
+-9223372036854775808
+-9223372036854775808
+-9223372036854775808
+-9223372036854775808
+-9223372036854775808
+-9223372036854775808
+9223372036854775805 9223372036854775806 9223372036854775807
+123 456
+123 456
+123 456
+123 456
+123 456
+123 456
+1
+1 2 3 4 5 6 7
+0 1 2 3 4 5 6 7
+0
+0, 0
+0, 1
+efg
+e
+efg
+e
+abcdefg
+efg
+0
+0
+0
+0
+0
+0
+0
+8 12
+./arith.tests: line 310: ((: x=9 y=41 : syntax error in expression (error token is "y=41 ")
+./arith.tests: line 314: a b: syntax error in expression (error token is "b")
+./arith.tests: line 315: ((: a b: syntax error in expression (error token is "b")
+42
+42
+42
+42
+42
+42
+./arith.tests: line 327: 'foo' : syntax error: operand expected (error token is "'foo' ")
+./arith.tests: line 331: b[c]d: syntax error in expression (error token is "d")
diff --git a/tests/arith.tests b/tests/arith.tests
new file mode 100644
index 0000000..1a3501a
--- /dev/null
+++ b/tests/arith.tests
@@ -0,0 +1,331 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+set +o posix
+declare -i iv jv
+
+iv=$(( 3 + 5 * 32 ))
+echo $iv
+iv=iv+3
+echo $iv
+iv=2
+jv=iv
+
+let "jv *= 2"
+echo $jv
+jv=$(( $jv << 2 ))
+echo $jv
+
+let jv="$jv / 2"
+echo $jv
+jv="jv >> 2"
+echo $jv
+
+iv=$((iv+ $jv))
+echo $iv
+echo $((iv -= jv))
+echo $iv
+echo $(( iv == jv ))
+echo $(( iv != $jv ))
+echo $(( iv < jv ))
+echo $(( $iv > $jv ))
+echo $(( iv <= $jv ))
+echo $(( $iv >= jv ))
+
+echo $jv
+echo $(( ~$jv ))
+echo $(( ~1 ))
+echo $(( ! 0 ))
+
+echo $(( jv % 2 ))
+echo $(( $iv % 4 ))
+
+echo $(( iv <<= 16 ))
+echo $(( iv %= 33 ))
+
+echo $(( 33 & 55 ))
+echo $(( 33 | 17 ))
+
+echo $(( iv && $jv ))
+echo $(( $iv || jv ))
+
+echo $(( iv && 0 ))
+echo $(( iv & 0 ))
+echo $(( iv && 1 ))
+echo $(( iv & 1 ))
+
+echo $(( $jv || 0 ))
+echo $(( jv | 0 ))
+echo $(( jv | 1 ))
+echo $(( $jv || 1 ))
+
+let 'iv *= jv'
+echo $iv
+echo $jv
+let "jv += $iv"
+echo $jv
+
+echo $(( jv /= iv ))
+echo $(( jv <<= 8 ))
+echo $(( jv >>= 4 ))
+
+echo $(( iv |= 4 ))
+echo $(( iv &= 4 ))
+
+echo $(( iv += (jv + 9)))
+echo $(( (iv + 4) % 7 ))
+
+# unary plus, minus
+echo $(( +4 - 8 ))
+echo $(( -4 + 8 ))
+
+# conditional expressions
+echo $(( 4<5 ? 1 : 32))
+echo $(( 4>5 ? 1 : 32))
+echo $(( 4>(2+3) ? 1 : 32))
+echo $(( 4<(2+3) ? 1 : 32))
+echo $(( (2+2)<(2+3) ? 1 : 32))
+echo $(( (2+2)>(2+3) ? 1 : 32))
+
+# bug in bash versions through bash-3.2
+S=105
+W=$((S>99?4:S>9?3:S>0?2:0))
+echo $W
+unset W S
+
+# check that the unevaluated part of the ternary operator does not do
+# evaluation or assignment
+x=i+=2
+y=j+=2
+declare -i i=1 j=1
+echo $((1 ? 20 : (x+=2)))
+echo $i,$x
+echo $((0 ? (y+=2) : 30))
+echo $j,$y
+
+x=i+=2
+y=j+=2
+declare -i i=1 j=1
+echo $((1 ? 20 : (x+=2)))
+echo $i,$x
+echo $((0 ? (y+=2) : 30))
+echo $i,$y
+
+# check precedence of assignment vs. conditional operator
+# should be an error
+declare -i x=2
+y=$((1 ? 20 : x+=2))
+
+# check precedence of assignment vs. conditional operator
+declare -i x=2
+echo $((0 ? x+=2 : 20))
+
+# associativity of assignment-operator operator
+declare -i i=1 j=2 k=3
+echo $((i += j += k))
+echo $i,$j,$k
+
+# octal, hex
+echo $(( 0x100 | 007 ))
+echo $(( 0xff ))
+echo $(( 16#ff ))
+echo $(( 16#FF/2 ))
+echo $(( 8#44 ))
+
+echo $(( 8 ^ 32 ))
+
+# other bases
+echo $(( 16#a ))
+echo $(( 32#a ))
+echo $(( 56#a ))
+echo $(( 64#a ))
+
+echo $(( 16#A ))
+echo $(( 32#A ))
+echo $(( 56#A ))
+echo $(( 64#A ))
+
+echo $(( 64#@ ))
+echo $(( 64#_ ))
+
+# weird bases
+echo $(( 3425#56 ))
+
+# missing number after base now generates an error
+echo $(( 2# ))
+
+# these should generate errors
+echo $(( 7 = 43 ))
+echo $(( 2#44 ))
+echo $(( 44 / 0 ))
+let 'jv += $iv'
+echo $(( jv += \$iv ))
+let 'rv = 7 + (43 * 6'
+
+# more errors
+declare -i i
+i=0#4
+i=2#110#11
+
+((echo abc; echo def;); echo ghi)
+
+if (((4+4) + (4 + 7))); then
+	echo ok
+fi
+
+(())	# make sure the null expression works OK
+
+a=(0 2 4 6)
+echo $(( a[1] + a[2] ))
+echo $(( (a[1] + a[2]) == a[3] ))
+(( (a[1] + a[2]) == a[3] )) ; echo $?
+
+# test pushing and popping the expression stack
+unset A
+A="4 + "
+echo $(( ( 4 + A ) + 4 ))
+A="3 + 5"
+echo $(( ( 4 + A ) + 4 ))
+
+# badly-formed conditional expressions
+echo $(( 4 ? : $A ))
+echo $(( 1 ? 20 ))
+echo $(( 4 ? 20 : ))
+
+# precedence and short-circuit evaluation
+B=9
+echo $B
+
+echo $(( 0 && B=42 ))
+echo $B
+
+echo $(( 1 || B=88 ))
+echo $B
+
+echo $(( 0 && (B=42) ))
+echo $B
+
+echo $(( (${$} - $$) && (B=42) ))
+echo $B
+
+echo $(( 1 || (B=88) ))
+echo $B
+
+# until command with (( )) command
+x=7
+
+echo $x
+until (( x == 4 ))
+do
+	echo $x
+	x=4
+done
+
+echo $x
+
+# exponentiation
+echo $(( 2**15 - 1))
+echo $(( 2**(16-1)))
+echo $(( 2**16*2 ))
+echo $(( 2**31-1))
+echo $(( 2**0 ))
+
+# {pre,post}-{inc,dec}rement and associated errors
+
+x=4
+
+echo $x
+echo $(( x++ ))
+echo $x
+echo $(( x-- ))
+echo $x
+
+echo $(( --x ))
+echo $x
+
+echo $(( ++x ))
+echo $x
+
+echo $(( ++7 ))
+echo $(( 7-- ))
+
+echo $(( --x=7 ))
+echo $(( ++x=7 ))
+
+echo $(( x++=7 ))
+echo $(( x--=7 ))
+
+echo $x
+
+echo $(( +7 ))
+echo $(( -7 ))
+
+echo $(( ++7 ))
+echo $(( --7 ))
+
+# combinations of expansions
+echo $(( "`echo 1+1`" ))
+echo $(( `echo 1+1` ))
+
+${THIS_SH} ./arith1.sub
+${THIS_SH} ./arith2.sub
+${THIS_SH} ./arith3.sub
+${THIS_SH} ./arith4.sub
+
+# make sure arithmetic expansion handles ints > 2**31 - 1 using intmax_t
+echo $(( 2147483645 + 4 ))
+
+# other tests using INTMAX_MIN and INTMAX_MAX that cause exceptions if not
+# handled correctly -- problem through bash-4.2
+${THIS_SH} ./arith5.sub
+
+# problems with suppressing evaluation present through bash-4.2
+${THIS_SH} ./arith6.sub
+
+# problems with parsing arithmetic expressions containing colons that are
+# part of word expansions such as substring extraction
+${THIS_SH} ./arith7.sub
+
+# problems with evaluation of conditional expressions
+${THIS_SH} ./arith8.sub
+
+x=4
+y=7
+
+(( x=8 , y=12 ))
+
+echo $x $y
+
+# should be an error
+(( x=9 y=41 ))
+
+# These are errors
+unset b
+echo $((a b))
+((a b))
+
+n=42
+printf "%d\n" $n
+printf "%i\n" $n
+echo $(( 8#$(printf "%o\n" $n) ))
+printf "%u\n" $n
+echo $(( 16#$(printf "%x\n" $n) ))
+echo $(( 16#$(printf "%X\n" $n) ))
+
+# these are errors
+foo=1
+echo $(( 'foo' ))
+
+
+# causes longjmp botches through bash-2.05b
+a[b[c]d]=e
diff --git a/tests/arith1.sub b/tests/arith1.sub
new file mode 100644
index 0000000..3168fcb
--- /dev/null
+++ b/tests/arith1.sub
@@ -0,0 +1,51 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# test of redone post-increment and post-decrement code
+echo $(( 4-- ))
+echo $(( 4++ ))
+echo $(( 4 -- ))
+echo $(( 4 ++ ))
+
+(( array[0]++ ))
+echo ${array}
+
+(( array[0] ++ ))
+echo ${array}
+
+(( a++ ))
+echo $a
+(( a ++ ))
+echo $a
+
+echo $(( a ++ + 4 ))
+echo $a
+
+echo $(( a+++4 ))
+echo $a
+
+echo $(( a---4 ))
+echo $a
+
+echo $(( a -- + 4 ))
+echo $a
+
+echo $(( a -- - 4 ))
+echo $a
+
+(( ++ + 7 ))
+
+(( ++ ))
+echo $(( +++7 ))
+echo $(( ++ + 7 ))
+(( -- ))
diff --git a/tests/arith2.sub b/tests/arith2.sub
new file mode 100644
index 0000000..5475012
--- /dev/null
+++ b/tests/arith2.sub
@@ -0,0 +1,58 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+echo $(( --7 ))
+echo $(( ++7 ))
+echo $(( -- 7 ))
+echo $(( ++ 7 ))
+
+((++array[0] ))
+echo $array
+(( ++ array[0] ))
+echo $array
+
+(( ++a ))
+echo $a
+(( ++ a ))
+echo $a
+
+(( --a ))
+echo $a
+(( -- a ))
+echo $a
+
+echo $(( 4 + ++a ))
+echo $a
+
+echo $(( 4+++a ))
+echo $a
+
+echo $(( 4---a ))
+echo $a
+
+echo $(( 4 - -- a ))
+echo $a
+
+(( -- ))
+echo $(( ---7 ))
+echo $(( -- - 7 ))
+
+(( ++ ))
+echo $(( ++7 ))
+echo $(( ++ + 7 ))
+
+echo $(( ++-7 ))
+echo $(( ++ - 7 ))
+
+echo $(( +--7 ))
+echo $(( -- + 7 ))
diff --git a/tests/arith3.sub b/tests/arith3.sub
new file mode 100644
index 0000000..b4b1825
--- /dev/null
+++ b/tests/arith3.sub
@@ -0,0 +1,60 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# this depends on the sequence of random numbers from the internal LCRNG
+RANDOM=42
+(( dice[RANDOM%6+1 + RANDOM%6+1]++ ))
+echo ${dice[6]}
+
+(( ++dice[RANDOM%6+1 + RANDOM%6+1] ))
+echo ${dice[7]}
+
+v=4
+DIND=20
+
+(( dice[DIND%6 + 1]=v ))
+echo ${dice[3]}
+(( dice[DIND/v]+=2 ))
+
+RANDOM=42
+
+(( dice[RANDOM%6+1 + RANDOM%6+1]+=v ))
+echo ${dice[6]}
+
+(( dice[RANDOM%6+1 + RANDOM%6+1]-=v ))
+echo ${dice[7]}
+
+(( dice[RANDOM%6+1 + RANDOM%6+1]+=2 ))
+echo ${dice[8]}
+
+(( dice[RANDOM%6+1 + RANDOM%6+1]*=2 ))
+echo ${dice[5]}
+
+unset dice1 dice2
+RANDOM=42
+
+for i in {1..5000}; do ((dice1[$RANDOM%6+1 + $RANDOM%6+1]++)); done;
+unset t; for i in ${dice1[@]}; do ((t+=i)); done; echo $t
+
+foo="${dice1[@]}"
+
+RANDOM=42
+
+for i in {1..5000}; do ((dice2[RANDOM%6+1 + RANDOM%6+1]++)); done;
+unset t; for i in ${dice2[@]}; do ((t+=i)); done; echo $t
+
+bar="${dice2[@]}"
+
+if [ "$foo" != "$bar" ]; then
+	echo "random sequences differ"
+fi
diff --git a/tests/arith4.sub b/tests/arith4.sub
new file mode 100644
index 0000000..d74defa
--- /dev/null
+++ b/tests/arith4.sub
@@ -0,0 +1,10 @@
+x=$(( !!1 ))
+echo $x
+
+x=$(( -!+1 ))
+echo $x
+
+x=$(( +--+!!0 ))
+echo $x
+
+echo $(( !!+-+-~0 ))
diff --git a/tests/arith5.sub b/tests/arith5.sub
new file mode 100644
index 0000000..7d5c779
--- /dev/null
+++ b/tests/arith5.sub
@@ -0,0 +1,72 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# a lot of this is technically undefined behavior due to signed 64-bit
+# integer overflow, but we're testing exception handling here
+
+intmax_max=$((2**63 - 1))
+intmax_min1=$((2**63))
+intmax_min2=$((-2**63))
+
+case $intmax_max in
+9223372036854775807)	;;
+*)		echo "warning: your machine does not support 64-bit arithmetic using intmax_t" 2>&1 ;;
+esac
+
+# these are actually the same
+echo $(( $intmax_min1 % -1 ))
+echo $(( $intmax_min2 % -1 ))
+
+echo $(( $intmax_max % -1 ))
+
+lvalue=$intmax_min1
+(( lvalue%= -1 ))
+echo $lvalue
+
+lvalue=$intmax_min2
+(( lvalue%= -1 ))
+echo $lvalue
+
+lvalue=$intmax_max
+(( lvalue%= -1 ))
+echo $lvalue
+
+# and these
+echo $(( $intmax_min1 / -1 ))
+echo $(( $intmax_min2 / -1 ))
+
+lvalue=$intmax_min1
+(( lvalue /= -1 ))
+echo $lvalue
+
+lvalue=$intmax_min2
+(( lvalue /= -1 ))
+echo $lvalue
+
+echo $(( $intmax_min1 * -1 ))
+echo $(( $intmax_min2 * -1 ))
+
+lvalue=$intmax_min1
+(( lvalue *= -1 ))
+echo $lvalue
+
+lvalue=$intmax_min2
+(( lvalue *= -1 ))
+echo $lvalue
+
+echo $(( -${intmax_min1} ))
+echo $(( -${intmax_min2} ))
+
+foo1=$(( $intmax_max - 2 ))
+
+eval echo \{${foo1}..${intmax_max}\}
diff --git a/tests/arith6.sub b/tests/arith6.sub
new file mode 100644
index 0000000..dec8fd0
--- /dev/null
+++ b/tests/arith6.sub
@@ -0,0 +1,65 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+function reorder
+{
+	(( x[1] < x && (x=x[1], x[1]=$x) ))
+	echo "${x[@]}"
+}
+
+x=(123 456)
+reorder
+x=(456 123)
+reorder
+
+unset x
+unset -f reorder
+
+function reorder
+{
+	(( x[1] < x[0] && (x=x[1], x[1]=$x) ))
+	echo "${x[@]}"
+}
+
+x=(123 456)
+reorder
+x=(456 123)
+reorder
+
+unset x
+unset -f reorder
+
+function reorder
+{
+	(( x[1] < x[0] && (x[0]=x[1], x[1]=$x) ))
+	echo "${x[@]}"
+}
+
+x=(123 456)
+reorder
+x=(456 123)
+reorder
+
+unset -f reorder
+
+n=0 ; (( (a[n]=++n)<7&&a[0])); echo "${a[@]:1}"
+
+n=0 a="(a[n]=++n)<7&&a[0]"; ((a[0])); echo "${a[@]:1}"
+
+n=0 a="(a[n]=n++)<7&&a"; ((a)); echo "${a[@]:1}"
+
+# bugs with lvalue caching and pointer aliasing through bash-4.2
+echo $(( a=(y[0] + y[1]) & 0xff, b=(y[2] + y[3]) & 0xff, a << 8 | b))
+echo $a, $b
+((a = y[0], b = 1 ))
+echo $a, $b
diff --git a/tests/arith7.sub b/tests/arith7.sub
new file mode 100644
index 0000000..1b73ba7
--- /dev/null
+++ b/tests/arith7.sub
@@ -0,0 +1,11 @@
+PARAM=abcdefg
+
+echo ${PARAM:1 ? 4 : 2}
+echo ${PARAM:1 ? 4 : 2:1}
+
+echo ${PARAM: 4<5 ? 4 : 2}
+echo ${PARAM: 5>4 ? 4 : 2:1}
+
+echo ${PARAM:${OFFSET:-0}}
+OFFSET=4
+echo ${PARAM:${OFFSET:-0}}
diff --git a/tests/arith8.sub b/tests/arith8.sub
new file mode 100644
index 0000000..e6f1b0d
--- /dev/null
+++ b/tests/arith8.sub
@@ -0,0 +1,50 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# problems with evaluation of wrong terms in conditional expressions through
+# bash-4.4
+
+a=0 x="a=1"
+((0?x:0))
+echo $a
+unset a x
+
+a=0 x="a=1"
+((1?0:x))
+echo $a
+unset a x
+
+a=0 x="a=1"
+((0?(x):0))
+echo $a
+unset a x
+
+a=0 x="a=1"
+((0?$x:0))
+echo $a
+unset a x
+
+a=0 x="a=1"
+((0&&x))
+echo $a
+unset a x
+
+a=0 x="a=1"
+((1||x))
+echo $a
+unset a x
+
+a=0
+((0?arr[a=1]:0))
+echo $a
+unset a
diff --git a/tests/array-at-star b/tests/array-at-star
new file mode 100755
index 0000000..80f039d
--- /dev/null
+++ b/tests/array-at-star
@@ -0,0 +1,120 @@
+# test the expansion of ${array[@]} and ${array[*]}, both quoted and
+# unquoted.  the expansions should be exactly analogous to the
+# expansions of $@ and $* quoted and unquoted
+A=(a b)
+
+recho "${A[*]}"
+
+# If IFS is null, the parameters are joined without separators
+IFS=''
+recho "${A[*]}"
+
+# If IFS is unset, the parameters are separated by spaces
+unset IFS
+recho "${A[*]}"
+
+recho "${A[@]}"
+recho ${A[@]}
+
+IFS='/'
+A=(bob 'tom dick harry' joe)
+set ${A[*]}
+recho $#
+recho $1
+recho $2
+recho $3
+
+A=(bob 'tom dick harry' joe)
+set ${A[*]}
+recho $#
+recho $1
+recho $2
+recho $3
+
+A=(bob 'tom dick harry' joe)
+set ${A[@]}
+recho $#
+recho $1
+recho $2
+recho $3
+
+A=(bob 'tom dick harry' joe)
+set ${A[@]}
+recho $#
+recho $1
+recho $2
+recho $3
+
+# according to POSIX.2, unquoted $* should expand to multiple words if
+# $IFS is null, just like unquoted $@
+IFS=''
+A=(bob 'tom dick harry' joe)
+set "${A[*]}"
+recho $#
+recho $1
+recho $2
+recho $3
+
+A=(bob 'tom dick harry' joe)
+set ${A[*]}
+recho $#
+recho $1
+recho $2
+recho $3
+
+A=(bob 'tom dick harry' joe)
+set ${A[@]}
+recho $#
+recho $1
+recho $2
+recho $3
+
+# if IFS is unset, the individual positional parameters are split on
+# " \t\n" if $* or $@ are unquoted
+unset IFS
+A=(bob 'tom dick harry' joe)
+set ${A[*]}
+recho $#
+recho $1
+recho $2
+recho $3
+
+A=(bob 'tom dick harry' joe)
+set ${A[@]}
+recho $#                                              
+recho $1
+recho $2
+recho $3
+
+# but not for "$@" or "$*"
+A=(bob 'tom dick harry' joe)
+set "${A[*]}"
+recho $#
+recho $1
+recho $2
+recho $3
+
+A=(bob 'tom dick harry' joe)
+set "${A[@]}"
+recho $#
+recho $1
+recho $2
+recho $3
+
+# these should both expand the value of A to multiple words
+A=(a b c d e)
+IFS=""
+recho ${A[@]}
+recho "${A[@]}"
+
+# this example is straight from the POSIX.2 rationale and adapted to arrays
+A=(foo bar bam)
+
+recho "${A[@]}"
+recho "${A[*]}"
+
+unset IFS
+
+recho "${A[@]}"
+recho ${A[@]}
+recho "${A[*]}"
diff --git a/tests/array.right b/tests/array.right
new file mode 100644
index 0000000..2d1c51d
--- /dev/null
+++ b/tests/array.right
@@ -0,0 +1,765 @@
+
+./array.tests: line 28: syntax error near unexpected token `&'
+./array.tests: line 28: `test=(first & second)'
+1
+abcde
+abcde
+abcde bdef
+abcde bdef
+declare -a BASH_ARGC=()
+declare -a BASH_ARGV=()
+declare -a BASH_LINENO=([0]="0")
+declare -a BASH_SOURCE=([0]="./array.tests")
+declare -a DIRSTACK=()
+declare -a FUNCNAME
+declare -a a=([0]="abcde" [1]="" [2]="bdef")
+declare -a b
+declare -ar c
+abcde bdef
+abcde bdef
+abcde
+abcde
+abcde
+
+bdef
+hello world
+11
+3
+bdef hello world test expression test 2
+./array.tests: line 92: readonly: `a[5]': not a valid identifier
+declare -ar a=([1]="" [2]="bdef" [5]="hello world" [6]="test expression" [15]="test 2")
+declare -ar c
+declare -ar a=([1]="" [2]="bdef" [5]="hello world" [6]="test expression" [15]="test 2")
+declare -ar c
+readonly -a a=([1]="" [2]="bdef" [5]="hello world" [6]="test expression" [15]="test 2")
+readonly -a c
+a test
+declare -a BASH_ARGC=()
+declare -a BASH_ARGV=()
+declare -a BASH_LINENO=([0]="0")
+declare -a BASH_SOURCE=([0]="./array.tests")
+declare -a DIRSTACK=()
+declare -a FUNCNAME
+declare -ar a=([1]="" [2]="bdef" [5]="hello world" [6]="test expression" [15]="test 2")
+declare -a b=([0]="this" [1]="is" [2]="a" [3]="test" [4]="" [5]="/etc/passwd")
+declare -ar c
+declare -a d=([1]="" [2]="bdef" [5]="hello world" [6]="test" [9]="ninth element")
+declare -a e=([0]="test")
+declare -a f=([0]="" [1]="bdef" [2]="hello world" [3]="test" [4]="ninth element")
+./array.tests: line 116: a: readonly variable
+./array.tests: line 118: b[]: bad array subscript
+./array.tests: line 119: b[*]: bad array subscript
+this
+./array.tests: line 122: c[-2]: bad array subscript
+./array.tests: line 123: c: bad array subscript
+
+./array.tests: line 125: d[7]: cannot assign list to array member
+./array.tests: line 127: []=abcde: bad array subscript
+./array.tests: line 127: [*]=last: cannot assign to non-numeric index
+./array.tests: line 127: [-65]=negative: bad array subscript
+declare -a BASH_ARGC=()
+declare -a BASH_ARGV=()
+declare -a BASH_LINENO=([0]="0")
+declare -a BASH_SOURCE=([0]="./array.tests")
+declare -a DIRSTACK=()
+declare -a FUNCNAME
+declare -ar a=([1]="" [2]="bdef" [5]="hello world" [6]="test expression" [15]="test 2")
+declare -a b=([0]="this" [1]="is" [2]="a" [3]="test" [4]="" [5]="/etc/passwd")
+declare -ar c
+declare -a d=([1]="test test")
+declare -a f=([0]="" [1]="bdef" [2]="hello world" [3]="test" [4]="ninth element")
+./array.tests: line 135: unset: ps1: not an array variable
+./array.tests: line 139: declare: c: cannot destroy array variables in this way
+this of
+this is a test of read using arrays
+this test
+this is a test of arrays
+declare -a BASH_ARGC=()
+declare -a BASH_ARGV=()
+declare -a BASH_LINENO=([0]="0")
+declare -a BASH_SOURCE=([0]="./array.tests")
+declare -a DIRSTACK=()
+declare -a FUNCNAME
+declare -ar a=([1]="" [2]="bdef" [5]="hello world" [6]="test expression" [15]="test 2")
+declare -a b=([0]="this" [1]="is" [2]="a" [3]="test" [4]="" [5]="/etc/passwd")
+declare -ar c
+declare -a d=([1]="test test")
+declare -a f=([0]="" [1]="bdef" [2]="hello world" [3]="test" [4]="ninth element")
+declare -a rv=([0]="this" [1]="is" [2]="a" [3]="test" [4]="of" [5]="read" [6]="using" [7]="arrays")
+abde
+abde
+bbb
+efgh
+wxyz
+wxyz
+./array.tests
+a
+b c
+d
+e f g
+h
+./array.tests
+a
+b c
+d
+e f g
+h
+/bin /usr/bin /usr/ucb /usr/local/bin . /sbin /usr/sbin
+bin bin ucb bin . sbin sbin
+bin
+/ / / / / /
+/
+argv[1] = <bin>
+argv[1] = </>
+argv[1] = <sbin>
+argv[1] = </>
+\bin \usr/bin \usr/ucb \usr/local/bin . \sbin \usr/sbin
+\bin \usr\bin \usr\ucb \usr\local\bin . \sbin \usr\sbin
+\bin \usr\bin \usr\ucb \usr\local\bin . \sbin \usr\sbin
+4 -- 4
+7 -- 7
+55
+49
+6 -- 6
+42 14 44
+grep [ 123 ] *
+6 7 9
+6 7 9 5
+length = 3
+value = new1 new2 new3
+./array.tests: line 255: narray: unbound variable
+./array1.sub: line 1: syntax error near unexpected token `('
+./array1.sub: line 1: `printf "%s\n" -a a=(a 'b  c')'
+./array2.sub: line 1: declare: `[]=asdf': not a valid identifier
+./array2.sub: line 2: a[]: bad array subscript
+./array2.sub: line 4: syntax error near unexpected token `('
+./array2.sub: line 4: `declare -a ''=(a 'b c')'
+9
+9
+
+
+7 8 9
+8 11
+8 11
+6
+6
+nordholz
+8
+8
+8
+
+a b c d e f g
+for case if then else
+<> < > !
+12 14 16 18 20
+4414758999202
+aaa bbb
+./array.tests: line 305: syntax error near unexpected token `<>'
+./array.tests: line 305: `metas=( <> < > ! )'
+./array.tests: line 306: syntax error near unexpected token `<>'
+./array.tests: line 306: `metas=( [1]=<> [2]=< [3]=> [4]=! )'
+abc 3
+case 4
+abc case if then else 5
+abc case if then else 5
+0
+case 4
+case if then else 5
+case if then else 5
+argv[1] = <0>
+argv[2] = <1>
+argv[3] = <4>
+argv[4] = <10>
+argv[1] = <0>
+argv[2] = <1>
+argv[3] = <4>
+argv[4] = <10>
+argv[1] = <0>
+argv[2] = <1>
+argv[3] = <4>
+argv[4] = <10>
+argv[1] = <0 1 4 10>
+include null element -- expect one
+one
+include unset element -- expect three five
+three five
+start at unset element -- expect five seven
+five seven
+too many elements -- expect three five seven
+three five seven
+positive offset - expect five seven
+five seven
+negative offset to unset element - expect seven
+seven
+positive offset 2 - expect seven
+seven
+negative offset 2 - expect seven
+seven
+out-of-range offset
+
+e
+4
+1 4 7 10
+'b
+b  c
+$0
+declare -a A=([0]="X=a" [1]="b")
+t
+[3]=abcde r s t u v
+e
+9
+2
+a b c
+argv[1] = <-iname 'a>
+argv[2] = <-iname 'b>
+argv[3] = <-iname 'c>
+'hey'
+hey
+''hey
+'hey'
+argv[1] = <c>
+argv[2] = <d>
+argv[3] = <e>
+argv[4] = <f>
+argv[1] = <c d>
+argv[2] = <e f>
+argv[1] = <c d>
+argv[2] = <e f>
+argv[1] = <c d>
+argv[2] = <e f>
+argv[1] = <-iname 'abc>
+argv[2] = <-iname 'def>
+argv[1] = <-iname 'abc>
+argv[2] = <-iname 'def>
+argv[1] = <-iname>
+argv[2] = <abc -iname def>
+argv[1] = <-iname 'abc>
+argv[2] = <-iname 'def>
+argv[1] = <-iname>
+argv[2] = <abc -iname def>
+argv[1] = <-iname 'abc>
+argv[2] = <-iname 'def>
+argv[1] = <-iname 'abc>
+argv[2] = <-iname 'def>
+argv[1] = <-iname>
+argv[2] = <abc -iname def>
+*.* OK
+1
+a1 2 3c
+argv[1] = <var with spaces>
+argv[1] = <var with spaces>
+argv[1] = <var with spacesab>
+argv[2] = <cd>
+argv[3] = <ef>
+argv[1] = <var with spacesab>
+argv[2] = <cd>
+argv[3] = <ef>
+argv[1] = <var with spacesab>
+argv[2] = <cd>
+argv[3] = <ef>
+argv[1] = <var with spacesab>
+argv[2] = <cd>
+argv[3] = <ef>
+argv[1] = <var with spacesab>
+argv[2] = <cd>
+argv[3] = <ef>
+argv[1] = <var with spacesab>
+argv[2] = <cd>
+argv[3] = <ef>
+2
+argv[1] = <element1 with spaces>
+argv[2] = <element2 with spaces>
+argv[1] = <element1 with spaces>
+argv[2] = <element2 with spaces>
+nord!olz
+
+rdholz
+
+rdholz
+rdho
+
+
+argv[1] = <fooq//barq/>
+argv[1] = <fooq>
+argv[2] = <>
+argv[3] = <barq>
+argv[4] = <>
+argv[1] = <foo!//bar!/>
+argv[1] = <foo!>
+argv[2] = <>
+argv[3] = <bar!>
+argv[4] = <>
+argv[1] = <ooq//arq/>
+argv[1] = <ooq>
+argv[2] = <>
+argv[3] = <arq>
+argv[4] = <>
+argv[1] = <Fooq//Barq/>
+argv[1] = <Fooq>
+argv[2] = <>
+argv[3] = <Barq>
+argv[4] = <>
+argv[1] = <FOOQ//BARQ/>
+argv[1] = <FOOQ>
+argv[2] = <>
+argv[3] = <BARQ>
+argv[4] = <>
+126
+127
+128
+argv[1] = <€>
+argv[1] = <~>
+argv[2] = <^?>
+argv[3] = <€>
+argv[1] = <~>
+argv[2] = <^?>
+argv[3] = <€>
+argv[1] = <~>
+argv[2] = <^?>
+argv[3] = <€>
+Monday Tuesday Wednesday Thursday Friday Saturday Sunday
+Monday
+Monday
+Tuesday
+Monday
+Monday
+Tuesday
+Monday
+Tuesday
+Wednesday
+Monday
+Tuesday
+Wednesday
+monday, monday, tuesday
+wednesday, wednesday, thursday
+monday, monday, tuesday
+Wednesday, Wednesday, Thursday
+nday
+esday
+dnesday
+nday
+esday
+dnesday
+onday
+uesday
+ednesday
+onday
+uesday
+ednesday
+version[agent]
+version.agent
+version[agent]
+version.agent
+foo[bar] version[agent]
+bowl version.agent
+foobar] foo foo[bar]
+bleh bbb bleh
+ab]
+bar
+1
+1
+1
+1
+1
+1
+main main
+function function
+function function
+declare -a x=([0]="0" [1]="1" [2]="2" [3]="3" [4]="4" [5]="5")
+declare -a x=([0]="0" [1]="1" [2]="2" [3]="3" [4]="4")
+declare -a x=([0]="0" [1]="1" [2]="2" [4]="4")
+./array14.sub: line 24: unset: [-10]: bad array subscript
+declare -a x=([0]="0" [1]="1" [2]="2" [3]="3" [4]="4")
+declare -a x=([0]="0" [1]="1" [2]="2" [3]="3" [4]="4" [5]="five")
+declare -a x=([0]="0" [1]="1" [2]="2" [3]="3" [4]="4" [5]="5")
+declare -a x=([0]="0" [1]="1" [2]="2" [3]="3" [4]="4" [5]="foo")
+declare -a x=([0]="0" [1]="1" [2]="2" [3]="3" [4]="4" [5]="5")
+declare -a x=([0]="0" [1]="1" [2]="2" [3]="3" [4]="4four" [5]="5")
+strlen(4four) = 5
+1 2 0 3
+1 2 0 3
+1 2 0 3
+1 2 0 3
+1 2 0 3
+foo index 1: ok
+foo index 2: ok
+foo: implicit reference to element 0: ok
+foo: arithmetic evaluation: ok
+bar: array with element zero unset: ok
+bar: element zero: ok
+qux: unset array: ok
+qux: unset array element 0: ok
+2
+2
+2
+2
+0
+0
+1
+./array17.sub: line 43: ~: syntax error: operand expected (error token is "~")
+0
+0
+3
+3
+0
+0
+zero
+zero
+one
+one
+one
+one
+two
+two
+./array17.sub: line 89: ~ : syntax error: operand expected (error token is "~ ")
+1
+argv[1] = <>
+argv[2] = <>
+argv[3] = <>
+argv[1] = <bar>
+argv[1] = <->
+argv[2] = <->
+argv[1] = <  >
+argv[1] = <qux>
+argv[1] = <->
+argv[2] = <->
+argv[1] = <  >
+argv[1] = <>
+argv[2] = <>
+argv[3] = <>
+argv[1] = <bar>
+argv[1] = <->
+argv[2] = <->
+argv[1] = <  >
+argv[1] = <qux>
+argv[1] = <->
+argv[2] = <->
+argv[1] = <  >
+declare -a foo=([0]="( zeroind )")
+declare -a foo=([0]="zeroind")
+declare -a foo=([0]="zeroind")
+declare -a foo=([0]="[0]=bar")
+declare -a foo=([0]="[0]=bar")
+declare -a foo=([0]="[0]=bar")
+declare -- a="(1 2 3)"
+declare -a a=([0]="1" [1]="2" [2]="3")
+declare -- a="([0]=a [1]=b)"
+declare -a a=([0]="a" [1]="b")
+declare -A a=([1]="b" [0]="a" )
+declare -a var=([0]="[\$(echo" [1]="total" [2]="0)]=1" [3]="[2]=2]")
+declare -a var=([0]="[\$(echo total 0)]=1 [2]=2]")
+declare -a var=([0]="[\$(echo" [1]="total" [2]="0)]=1" [3]="[2]=2]")
+./array19.sub: line 89: total 0: syntax error in expression (error token is "0")
+declare -a var=()
+declare -al foo=([0]="abcde" [1]="two" [2]="three")
+declare -al foo=([0]="abcde")
+declare -al ar=([0]="one" [1]="two" [2]="three")
+declare -a a=([2]="foo")
+declare -a a=([2]="foo")
+declare -a a=([1]="(var)" [2]="foo")
+./array19.sub: line 128: warning: a[1]=(var): quoted compound array assignment deprecated
+declare -a a=([1]="(var)")
+declare -a a=([0]="1" [1]="2" [2]="(1 2 3)")
+declare -a a=([0]="1" [1]="2" [2]="(1 2 3)")
+declare -a a=([0]="1" [1]="2" [2]="3")
+declare -a a=([0]="1" [1]="2" [2]="3")
+declare -a a=([0]="1" [1]="2" [2]="3")
+declare -- a="a b"
+declare -- b="/scratch/bash"
+declare -- c="(1 2)"
+declare -- d="(\$a)"
+declare -- e="(\$(echo Darwin))"
+declare -a a=([0]="a b")
+declare -a b=([0]="/scratch/bash")
+declare -a c=([0]="1" [1]="2")
+declare -a d=([0]="a" [1]="b")
+declare -a e=([0]="Darwin")
+declare -A a=([0]="a b" )
+declare -A b=([0]="/scratch/bash" )
+declare -A c=([1]="2" )
+declare -A d=(["a b"]="" )
+declare -A e=([Darwin]="" )
+a+b+c
+x+b+c
+a+b+c
+x+b+c
+argv[1] = <a+b+c+d+e+f>
+argv[1] = <x+b+c+d+e+f>
+a b c
+x b c
+a b c
+x b c
+declare -a a=([1]="2" [2]="3" [3]="4")
+abcd
+unset
+./array21.sub: line 30: typeset: a: not found
+./array21.sub: line 33: typeset: A: not found
+declare -a a=()
+declare -A A=()
+declare -a foo=([0]="1" [1]="(4 5 6)" [2]="3")
+a1
+argv[1] = <>
+argv[2] = <>
+a2
+argv[1] = <y>
+argv[1] = <z>
+a3
+argv[1] = <>
+argv[2] = <x>
+a4
+argv[1] = <y>
+p1
+argv[1] = <>
+argv[2] = <>
+p2
+argv[1] = <>
+argv[2] = <x>
+p3
+argv[1] = <y>
+<X> <X> <X> <X>
+<X> <X> <X> <X>
+./array23.sub: line 22: $( echo >&2 foo ) : syntax error: operand expected (error token is "$( echo >&2 foo ) ")
+./array23.sub: line 23: $( echo >&2 foo ) : syntax error: operand expected (error token is "$( echo >&2 foo ) ")
+foo
+0
+foo
+foo
+foo
+6
+./array23.sub: line 34: $( echo >&2 foo ): syntax error: operand expected (error token is "$( echo >&2 foo )")
+./array23.sub: line 35: $( echo >&2 foo ): syntax error: operand expected (error token is "$( echo >&2 foo )")
+0
+0
+0
+IFS=: ${var-$*}
+abc
+def ghi
+jkl
+abc
+def ghi
+jkl
+----
+IFS=: ${var=$*}
+abc
+def ghi
+jkl
+var=abc:def ghi:jkl
+abc
+def ghi
+jkl
+var=abc:def ghi:jkl
+----
+IFS=: ${var+$*}
+abc
+def ghi
+jkl
+abc
+def ghi
+jkl
+----
+IFS= ${var-$*}
+abc
+def ghi
+jkl
+abc
+def ghi
+jkl
+----
+IFS= ${var=$*}
+abcdef ghijkl
+var=abcdef ghijkl
+abcdef ghijkl
+var=abcdef ghijkl
+----
+IFS= ${var+$*}
+abc
+def ghi
+jkl
+abc
+def ghi
+jkl
+1. indexed:
+reference:
+1. 0
+./array25.sub: line 24: ' ': syntax error: operand expected (error token is "' '")
+3. 0
+4. 0
+5. 0
+6. 0
+assignment:
+1.declare -a a=([0]="10" [1]="1")
+2.declare -a a=([0]="11" [1]="1")
+3.declare -a a=([0]="12" [1]="1")
+4.declare -a a=([0]="13" [1]="1")
+arithmetic:
+1.declare -a a=([0]="10" [1]="1")
+2.declare -a a=([0]="11" [1]="1")
+3.declare -a a=([0]="12" [1]="1")
+4.declare -a a=([0]="13" [1]="1")
+5.declare -a a=([0]="10" [1]="1")
+6.declare -a a=([0]="11" [1]="1")
+7.declare -a a=([0]="12" [1]="1")
+8.declare -a a=([0]="13" [1]="1")
+2. associative:
+reference:
+1.
+2.
+3. 
+4.
+5.
+6. 
+assignment:
+1.declare -A a=([1]="1" [0]="0" [" "]="10" )
+2.declare -A a=([1]="1" [0]="0" [" "]="11" )
+3.declare -A a=([1]="1" [0]="0" [" "]="12" )
+4.declare -A a=([1]="1" [0]="0" [" "]="13" )
+arithmetic:
+1.declare -A a=([1]="1" [0]="0" [" "]="10" )
+2.declare -A a=([1]="1" [0]="0" [" "]="11" )
+3.declare -A a=([1]="1" [0]="0" [" "]="12" )
+4.declare -A a=([1]="1" [0]="0" [" "]="13" )
+5.declare -A a=([1]="1" [0]="0" [" "]="10" )
+6.declare -A a=([1]="1" [0]="0" [" "]="10" ["\" \""]="11" )
+7.declare -A a=([1]="1" [0]="0" [" "]="12" ["\" \""]="11" )
+8.declare -A a=([1]="1" [0]="0" [" "]="12" ["\" \""]="13" )
+argv[1] = <aa>
+argv[2] = <bb>
+argv[1] = <aa>
+argv[2] = <bb>
+argv[1] = <aa>
+argv[2] = <bb>
+argv[1] = <aa>
+argv[2] = <bb>
+argv[1] = <aa>
+argv[2] = <bb>
+argv[3] = <aa>
+argv[4] = <bb>
+argv[1] = <aa>
+argv[2] = <bb>
+argv[3] = <aa>
+argv[4] = <bb>
+argv[1] = <aa+bb>
+argv[2] = <aa+bb>
+argv[1] = <aa>
+argv[2] = <bb>
+argv[3] = <aa>
+argv[4] = <bb>
+argv[1] = <xa>
+argv[2] = <bb>
+argv[1] = <xa>
+argv[2] = <bb>
+argv[1] = <xa>
+argv[2] = <bb>
+argv[1] = <xa>
+argv[2] = <bb>
+argv[1] = <xa>
+argv[2] = <bb>
+argv[1] = <xa>
+argv[2] = <bb>
+argv[1] = <xa+bb>
+argv[1] = <xa+bb>
+argv[1] = <xa+bb>
+argv[2] = <xa+bb>
+argv[1] = <bb>
+argv[2] = <xa>
+argv[1] = <bb>
+argv[2] = <xa>
+argv[1] = <bb>
+argv[2] = <xa>
+argv[1] = <bb+xa>
+argv[1] = <xa>
+argv[2] = <bb>
+argv[1] = <xa>
+argv[2] = <bb>
+argv[1] = <xa>
+argv[2] = <bb>
+argv[1] = <xa>
+argv[2] = <bb>
+argv[1] = <xa>
+argv[2] = <bb>
+argv[1] = <xa>
+argv[2] = <bb>
+argv[1] = <xabb>
+argv[1] = <xabb>
+argv[1] = <xabb>
+argv[2] = <xabb>
+argv[1] = <bb>
+argv[2] = <xa>
+argv[1] = <bb>
+argv[2] = <xa>
+argv[1] = <bb>
+argv[2] = <xa>
+argv[1] = <bbxa>
+argv[1] = <aa>
+argv[2] = <bb>
+argv[1] = <aa>
+argv[2] = <bb>
+argv[1] = <aa>
+argv[2] = <bb>
+argv[1] = <aa>
+argv[2] = <bb>
+argv[1] = <aa>
+argv[2] = <bb>
+argv[3] = <aa>
+argv[4] = <bb>
+argv[1] = <aa>
+argv[2] = <bb>
+argv[3] = <aa>
+argv[4] = <bb>
+argv[1] = <aa+bb>
+argv[2] = <aa+bb>
+argv[1] = <aa+bb>
+argv[2] = <aa+bb>
+argv[1] = <aa>
+argv[2] = <bb>
+argv[3] = <aa>
+argv[4] = <bb>
+argv[1] = <bb>
+argv[2] = <aa>
+argv[1] = <bb>
+argv[2] = <aa>
+argv[1] = <bb>
+argv[2] = <aa>
+argv[1] = <bb+aa>
+argv[1] = <a>
+argv[2] = <b>
+argv[1] = <a>
+argv[2] = <b>
+argv[1] = <a>
+argv[2] = <b>
+argv[3] = <a>
+argv[4] = <b>
+argv[1] = <a+b>
+argv[2] = <a+b>
+argv[1] = <a>
+argv[2] = <b>
+argv[3] = <a>
+argv[4] = <b>
+argv[1] = <b>
+argv[2] = <a>
+argv[1] = <b>
+argv[2] = <a>
+argv[1] = <b>
+argv[2] = <a>
+argv[1] = <b+a>
+7
+./array27.sub: line 24: a[]]=7 : syntax error: invalid arithmetic operator (error token is "]=7 ")
+declare -A A=([$'\t']="2" [" "]="2" )
+./array27.sub: line 36: ((: A[]]=2 : syntax error: invalid arithmetic operator (error token is "]=2 ")
+declare -A A=([$'\t']="2" ["*"]="2" [" "]="2" ["@"]="2" )
+./array27.sub: line 45: A[]]: bad array subscript
+declare -A A=([$'\t']="X" ["*"]="X" [" "]="X" ["@"]="X" )
+./array27.sub: line 53: A[]]: bad array subscript
+declare -A A=([$'\t']="X" ["*"]="X" [" "]="X" ["@"]="X" )
+./array27.sub: line 61: declare: `A[]]=X': not a valid identifier
+declare -A A=(["*"]="X" ["@"]="X" )
+./array27.sub: line 69: declare: `A[]]=X': not a valid identifier
+./array27.sub: line 69: A[*]: bad array subscript
+./array27.sub: line 69: A[@]: bad array subscript
+declare -A A
+declare -a bug4=([0]="" [1]="5" [2]="" [3]="1" [4]="")
+declare -a bug=([0]="" [1]="5" [2]="" [3]="1" [4]="")
+declare -a bug2=([0]="")
+declare -a bug3=([0]="" [1]="5" [2]="" [3]="1" [4]="")
+declare -a not_bug=([0]="no" [1]="nulls")
+declare -a workaround=([0]="")
diff --git a/tests/array.tests b/tests/array.tests
new file mode 100644
index 0000000..ba8e225
--- /dev/null
+++ b/tests/array.tests
@@ -0,0 +1,427 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# this is needed so that the bad assignments (b[]=bcde, for example) do not
+# cause fatal shell errors when in posix mode
+set +o posix
+
+set +a
+# The calls to egrep -v are to filter out builtin array variables that are
+# automatically set and possibly contain values that vary.
+
+# first make sure we handle the basics
+x=()
+echo ${x[@]}
+unset x
+
+# this should be an error
+test=(first & second)
+echo $?
+unset test
+
+# make sure declare -a converts an existing variable to an array
+unset a
+a=abcde
+declare -a a
+echo ${a[0]}
+if [ "$a" != "${a[0]}" ]; then
+	echo 'array.tests: $a and $a[0] array mismatch'
+fi
+
+unset a
+a=abcde
+a[2]=bdef
+
+unset b
+declare -a b[256]
+
+unset c[2]
+unset c[*]
+
+a[1]=
+
+_ENV=/bin/true
+x=${_ENV[(_$-=0)+(_=1)-_${-%%*i*}]}
+
+declare -r c[100]
+
+echo ${a[0]} ${a[4]}
+echo ${a[@]}
+
+echo ${a[*]}
+
+# this should print out values, too
+declare -a | egrep -v '(BASH_VERSINFO|PIPESTATUS|GROUPS)'
+
+unset a[7]
+echo ${a[*]}
+
+unset a[4]
+echo ${a[*]}
+
+echo ${a}
+echo "${a}"
+echo $a
+
+unset a[0]
+echo ${a}
+
+echo ${a[@]}
+
+a[5]="hello world"
+echo ${a[5]}
+echo ${#a[5]}
+
+echo ${#a[@]}
+
+a[4+5/2]="test expression"
+declare a["7 + 8"]="test 2"
+a[7 + 8]="test 2"
+echo ${a[@]}
+
+readonly a[5]
+readonly a
+# these two lines should output `declare' commands
+readonly -a | egrep -v '(BASH_VERSINFO|PIPESTATUS|GROUPS)'
+declare -ar | egrep -v '(BASH_VERSINFO|PIPESTATUS|GROUPS)'
+# this line should output `readonly' commands, even for arrays
+set -o posix
+readonly -a | egrep -v '(BASH_VERSINFO|PIPESTATUS|GROUPS)'
+set +o posix
+
+declare -a d='([1]="" [2]="bdef" [5]="hello world" "test")'
+d[9]="ninth element"
+
+declare -a e[10]=test	# this works in post-bash-2.05 versions
+declare -a e[10]='(test)'
+
+pass=/etc/passwd
+declare -a f='("${d[@]}")'
+b=([0]=this [1]=is [2]=a [3]=test [4]="$PS1" [5]=$pass)
+
+echo ${b[@]:2:3}
+
+declare -pa | egrep -v '(BASH_VERSINFO|PIPESTATUS|GROUPS)'
+
+a[3]="this is a test"
+
+b[]=bcde
+b[*]=aaa
+echo ${b[   ]}
+
+c[-2]=4
+echo ${c[-4]}
+
+d[7]=(abdedfegeee)
+
+d=([]=abcde [1]="test test" [*]=last [-65]=negative )
+
+unset d[12]
+unset e[*]
+
+declare -a | egrep -v '(BASH_VERSINFO|PIPESTATUS|GROUPS)'
+
+ps1='hello'
+unset ps1[2]
+unset ${ps1[2]}
+
+declare +a ps1
+declare +a c
+
+# the prompt should not print when using a here doc
+read -p "array test: " -a rv <<!
+this is a test of read using arrays
+!
+
+echo ${rv[0]} ${rv[4]}
+echo ${rv[@]}
+
+# the variable should be converted to an array when `read -a' is done
+vv=1
+read -a vv <<!
+this is a test of arrays
+!
+echo ${vv[0]} ${vv[3]}
+echo ${vv[@]}
+unset vv
+
+declare -a | egrep -v '(BASH_VERSINFO|PIPESTATUS|GROUPS)'
+
+export rv
+#set
+
+x[4]=bbb
+x=abde
+echo $x
+echo ${x[0]}
+echo ${x[4]}
+echo efgh | ( read x[1] ; echo ${x[1]} )
+echo wxyz | ( declare -a x ; read x ; echo $x ; echo ${x[0]} )
+
+# Make sure that arrays can be used to save the positional parameters verbatim
+set -- a 'b c' d 'e f g' h
+
+ARGV=( [0]=$0 "$@" )
+
+for z in "${ARGV[@]}"
+do
+	echo "$z"
+done
+
+echo "$0"
+for z in "$@"
+do
+	echo "$z"
+done
+
+# do various pattern removal and length tests
+XPATH=/bin:/usr/bin:/usr/ucb:/usr/local/bin:.:/sbin:/usr/sbin
+
+xpath=( $( IFS=: ; echo $XPATH ) )
+
+echo ${xpath[@]}
+echo ${xpath[@]##*/}
+echo ${xpath[0]##*/}
+echo ${xpath[@]%%[!/]*}
+echo ${xpath[0]%%[!/]*}
+recho ${xpath##*/}
+recho ${xpath%%[!/]*}
+recho ${xpath[5]##*/}
+recho ${xpath[5]%%[!/]*}
+
+# let's try to make it a DOS-style path
+
+zecho "${xpath[@]/\//\\}"
+zecho "${xpath[@]//\//\\}"
+zecho "${xpath[@]//[\/]/\\}"
+
+# length of the first element of the array, since array without subscript
+# is equivalent to referencing first element
+echo ${#xpath} -- ${#xpath[0]}
+
+# number of elements in the array
+nelem=${#xpath[@]}
+echo ${#xpath[@]} -- $nelem
+
+# total length of all elements in the array, including space separators
+xx="${xpath[*]}"
+echo ${#xx}
+
+# total length of all elements in the array
+xx=$( IFS='' ; echo "${xpath[*]}" )
+echo ${#xx}
+
+unset xpath[nelem-1]
+
+nelem=${#xpath[@]}
+echo ${#xpath[@]} -- $nelem
+
+# arrays and things that look like index assignments
+array=(42 [1]=14 [2]=44)
+
+array2=(grep [ 123 ] \*)
+
+echo ${array[@]}
+echo "${array2[@]}"
+
+# arrays and implicit arithmetic evaluation
+declare -i -a iarray
+
+iarray=( 2+4 1+6 7+2 )
+echo ${iarray[@]}
+
+iarray[4]=4+1
+echo ${iarray[@]}
+
+# make sure assignment using the compound assignment syntax removes all
+# of the old elements from the array value
+barray=(old1 old2 old3 old4 old5)
+barray=(new1 new2 new3)
+echo "length = ${#barray[@]}"
+echo "value = ${barray[*]}"
+
+# make sure the array code behaves correctly with respect to unset variables
+set -u
+( echo ${#narray[4]} )
+
+${THIS_SH} ./array1.sub
+${THIS_SH} ./array2.sub
+
+# some old bugs and ksh93 compatibility tests
+${THIS_SH} ./array3.sub
+
+# some compound assignment parsing problems that showed up in bash-3.1-release
+${THIS_SH} ./array4.sub
+
+set +u
+cd ${TMPDIR:=/tmp}
+
+touch 1=bar
+foo=([10]="bar")
+echo ${foo[0]}
+rm 1=bar
+
+cd $OLDPWD
+
+foo=(a b c d e f g)
+echo ${foo[@]}
+
+# quoted reserved words are ok
+foo=(\for \case \if \then \else)
+echo ${foo[@]}
+
+# quoted metacharacters are ok
+foo=( [1]='<>' [2]='<' [3]='>' [4]='!' )
+echo ${foo[@]}
+
+# numbers are just words when not in a redirection context
+foo=( 12 14 16 18 20 )
+echo ${foo[@]}
+
+foo=( 4414758999202 )
+echo ${foo[@]}
+
+# this was a bug in all versions of bash 2.x up to and including bash-2.04
+declare -a ddd=(aaa
+bbb)
+echo ${ddd[@]}
+
+# errors until post-bash-2.05a; now reserved words are OK
+foo=(a b c for case if then else)
+
+foo=(for case if then else)
+
+# errors
+metas=( <> < > ! )
+metas=( [1]=<> [2]=< [3]=> [4]=! )
+
+# various expansions that didn't really work right until post-bash-2.04
+foo='abc'
+echo ${foo[0]} ${#foo[0]}
+echo ${foo[1]} ${#foo[1]}
+echo ${foo[@]} ${#foo[@]}
+echo ${foo[*]} ${#foo[*]}
+
+foo=''
+echo ${foo[0]} ${#foo[0]}
+echo ${foo[1]} ${#foo[1]}
+echo ${foo[@]} ${#foo[@]}
+echo ${foo[*]} ${#foo[*]}
+
+# new expansions added after bash-2.05b
+x[0]=zero
+x[1]=one
+x[4]=four
+x[10]=ten
+
+recho ${!x[@]}
+recho "${!x[@]}"
+recho ${!x[*]}
+recho "${!x[*]}"
+
+# sparse array tests for code fixed in bash-3.0
+unset av
+av[1]='one'
+av[2]=''
+
+av[3]=three
+av[5]=five
+av[7]=seven
+
+echo include null element -- expect one
+echo ${av[@]:1:2}	# what happens when we include a null element?
+echo include unset element -- expect three five
+echo ${av[@]:3:2}	# what happens when we include an unset element?
+echo start at unset element -- expect five seven
+echo ${av[@]:4:2}	# what happens when we start at an unset element?
+
+echo too many elements -- expect three five seven
+echo ${av[@]:3:5}	# how about too many elements?
+
+echo positive offset - expect five seven
+echo ${av[@]:5:2}
+echo negative offset to unset element - expect seven
+echo ${av[@]: -2:2}
+
+echo positive offset 2 - expect seven
+echo ${av[@]: 6:2}
+echo negative offset 2 - expect seven
+echo ${av[@]: -1:2}
+
+echo out-of-range offset
+echo ${av[@]:12}
+
+# parsing problems and other inconsistencies not fixed until post bash-3.0
+unset x
+declare -a x=(')' $$)
+[ ${x[1]} -eq $$ ] || echo bad
+
+unset x
+declare -a x=(a b c d e)
+echo ${x[4]}
+
+z=([1]=one [4]=four [7]=seven [10]=ten)
+
+echo ${#z[@]}
+
+echo ${!z[@]}
+
+unset x
+declare -a x=(a \'b  c\')
+
+echo "${x[1]}"
+
+unset x
+declare -a x=(a 'b  c')
+
+echo "${x[1]}"
+
+unset x
+declare -a x=($0)
+[ "${x[@]}" = $0 ] || echo double expansion of \$0
+declare -a x=(\$0)
+echo "${x[@]}"
+
+unset A Z
+Z='a b'
+A=( X=$Z )
+declare -p A
+
+# tests for bash-3.1 problems
+${THIS_SH} ./array5.sub
+
+# tests for post-bash-3.2 problems, most fixed in bash-3.2 patches
+${THIS_SH} ./array6.sub
+${THIS_SH} ./array7.sub
+
+${THIS_SH} ./array8.sub
+${THIS_SH} ./array9.sub
+${THIS_SH} ./array10.sub
+${THIS_SH} ./array11.sub
+${THIS_SH} ./array12.sub
+${THIS_SH} ./array13.sub
+${THIS_SH} ./array14.sub
+${THIS_SH} ./array15.sub
+${THIS_SH} ./array16.sub
+${THIS_SH} ./array17.sub
+${THIS_SH} ./array18.sub
+${THIS_SH} ./array19.sub
+${THIS_SH} ./array20.sub
+${THIS_SH} ./array21.sub
+${THIS_SH} ./array22.sub
+${THIS_SH} ./array23.sub
+${THIS_SH} ./array24.sub
+${THIS_SH} ./array25.sub
+${THIS_SH} ./array26.sub
+${THIS_SH} ./array27.sub
+${THIS_SH} ./array28.sub
diff --git a/tests/array1.sub b/tests/array1.sub
new file mode 100644
index 0000000..86e9332
--- /dev/null
+++ b/tests/array1.sub
@@ -0,0 +1 @@
+printf "%s\n" -a a=(a 'b  c')
diff --git a/tests/array10.sub b/tests/array10.sub
new file mode 100644
index 0000000..7182480
--- /dev/null
+++ b/tests/array10.sub
@@ -0,0 +1,65 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+days=({Mon,Tues,Wednes,Thurs,Fri,Satur,Sun}day)
+echo ${days[@]}
+
+typeset -i count
+
+count=0
+echo ${days[${count}]}
+echo ${days[$((count++))]}
+echo ${days[$((count++))]}
+
+count=0
+echo ${days[count]}
+echo ${days[count++]}
+echo ${days[count++]}
+
+count=0
+echo ${days[$((count++))]/foo/bar}
+echo ${days[$((count++))]/foo/bar}
+echo ${days[$((count++))]/foo/bar}
+
+count=0
+echo ${days[count++]/foo/bar}
+echo ${days[count++]/foo/bar}
+echo ${days[count++]/foo/bar}
+
+count=0
+echo "${days[${count}],,}, ${days[$((count++))],,}, ${days[$((count++))],,}"
+echo "${days[${count}],,}, ${days[$((count++))],,}, ${days[$((count++))],,}"
+
+count=0
+echo "${days[${count}],,}, ${days[$((count++))],,}, ${days[$((count++))],,}"
+echo "${days[${count}]/foo/bar}, ${days[$((count++))]/foo/bar}, ${days[$((count++))]/foo/bar}"
+
+count=0
+echo ${days[$((count++))]:2}
+echo ${days[$((count++))]:2}
+echo ${days[$((count++))]:2}
+
+count=0
+echo ${days[count++]:2}
+echo ${days[count++]:2}
+echo ${days[count++]:2}
+
+count=0
+echo ${days[$((count++))]#?}
+echo ${days[$((count++))]#?}
+echo ${days[$((count++))]#?}
+
+count=0
+echo ${days[count++]#?}
+echo ${days[count++]#?}
+echo ${days[count++]#?}
diff --git a/tests/array11.sub b/tests/array11.sub
new file mode 100644
index 0000000..5961902
--- /dev/null
+++ b/tests/array11.sub
@@ -0,0 +1,48 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# problems with associative array keys with ] and unbalanced [ ]
+# fixed after bash-4.2
+
+declare -A foo
+
+foo=(["version[agent]"]=version.agent)
+
+echo ${!foo[@]}
+echo ${foo[@]}
+
+unset foo
+declare -A foo
+foo["version[agent]"]=version.agent
+
+echo ${!foo[@]}
+echo ${foo[@]}
+
+declare foo["foo[bar]"]=bowl
+
+echo ${!foo[@]}
+echo ${foo[@]}
+
+declare -A array2["foo[bar]"]=bleh
+
+array2["foobar]"]=bleh
+array2["foo"]=bbb
+
+echo ${!array2[@]}
+echo ${array2[@]}
+
+declare -A foo
+foo=( ['ab]']=bar )
+
+echo ${!foo[@]}
+echo ${foo[@]}
diff --git a/tests/array12.sub b/tests/array12.sub
new file mode 100644
index 0000000..fbf5eeb
--- /dev/null
+++ b/tests/array12.sub
@@ -0,0 +1,34 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# problems with fix for posix interp 217 introduced in bash-4.2
+
+declare -ax array
+array[$(( $( echo -n 1001 ) - 1001 ))]=1 
+
+echo ${array[0]}
+echo ${array[@]}
+
+unset 'array[0]'
+array[$( echo -n 1001 ) - 1001 ]=1 
+echo ${array[0]}
+
+unset 'array[0]'
+array[$(( 1001 - $( echo -n 1001 ) ))]=1 
+echo ${array[0]}
+array[$(( 1001 - $( echo -n 1001 ) ))]=1 
+echo ${array[0]}
+
+unset 'array[0]'
+array[1001 - $( echo -n 1001 )]=1 
+echo ${array[0]}
diff --git a/tests/array13.sub b/tests/array13.sub
new file mode 100644
index 0000000..635cb97
--- /dev/null
+++ b/tests/array13.sub
@@ -0,0 +1,12 @@
+
+func1(){
+declare -g variable='function'
+declare -g -a array=(function)
+echo  ${variable} ${array[@]}
+}
+
+declare -g variable='main'
+declare -g -a array=(main)
+echo  ${variable} ${array[@]}
+func1
+echo  ${variable} ${array[@]}
diff --git a/tests/array14.sub b/tests/array14.sub
new file mode 100644
index 0000000..57a455a
--- /dev/null
+++ b/tests/array14.sub
@@ -0,0 +1,43 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# start at a test suite for negative indexed array subscripts -- post bash-4.2
+x=( 0 1 2 3 4 5)
+declare -p x
+
+unset 'x[-1]'
+declare -p x
+
+unset 'x[-2]'
+declare -p x
+
+unset 'x[-10]'
+
+x[-2]=3
+declare -p x
+
+x+=( five )
+declare -p x
+x[-1]=5
+declare -p x
+
+x+=( [-1]=foo )
+declare -p x
+
+x[-1]=5
+declare -p x
+
+x[-2]+=four
+declare -p x
+
+echo "strlen(${x[-2]})" = ${#x[-2]}
diff --git a/tests/array15.sub b/tests/array15.sub
new file mode 100644
index 0000000..47796b9
--- /dev/null
+++ b/tests/array15.sub
@@ -0,0 +1,37 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# fixes for make_internal_declare not handling integer attribute for arrays
+declare -ai -g foo=(1 2 xx 3)
+echo "${foo[@]}"
+
+unset foo
+declare -ai -g foo='(1 2 xx 3)'
+echo "${foo[@]}"
+
+unset foo
+declare -ia -g foo=(1 2 xx 3)
+echo "${foo[@]}" 
+
+unset foo
+declare -ia -g foo='(1 2 xx 3)'
+echo "${foo[@]}" 
+
+unset foo
+func()
+{
+	declare -ai -g foo=(1 2 xx 3)
+}
+
+func
+echo "${foo[@]}" 
diff --git a/tests/array16.sub b/tests/array16.sub
new file mode 100644
index 0000000..b82dbca
--- /dev/null
+++ b/tests/array16.sub
@@ -0,0 +1,34 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+foo[0]=a
+foo[1]=b
+
+[[ -v foo[1] ]] && echo foo index 1: ok
+[[ -v foo[2] ]] || echo foo index 2: ok
+
+[[ -v foo ]] && echo foo: implicit reference to element 0: ok
+
+typeset -i foo
+
+[[ -v foo[1] ]] && echo foo: arithmetic evaluation: ok
+
+typeset -a bar
+bar[1]=set
+
+[[ -v bar ]] || echo bar: array with element zero unset: ok
+[[ -v bar[0] ]] || echo bar: element zero: ok
+
+typeset -a qux
+[[ -v qux ]] || echo qux: unset array: ok
+[[ -v qux[0] ]] || echo qux: unset array element 0: ok
diff --git a/tests/array17.sub b/tests/array17.sub
new file mode 100644
index 0000000..dd0c0f6
--- /dev/null
+++ b/tests/array17.sub
@@ -0,0 +1,91 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# this shows the expansions an array subscript undergoes before being run
+# through the arithmetic evaluator
+
+b=(0 1 2 3)
+
+# array subscripts undergo variable expansion
+a=2
+echo ${b[$a]}
+
+# array subscripts undergo command substitution
+echo ${b[$(echo 2)]}
+
+c='1+1'
+d='1-+1'
+
+# array subscripts are expanded and the expanded value is treated as an
+# expression
+echo ${b[$c]}
+echo ${b[c]}
+
+echo ${b[$d]}
+echo ${b[d]}
+
+# array subscripts undergo parameter expansion
+set -- 1 2 3
+echo ${b[$1]}
+
+# array subscripts undergo tilde expansion
+HOME=2
+echo ${b[~]}
+
+# array subscripts undergo word splitting -- bug in bash versions through 4.3
+
+x='b[$d]'
+IFS=-
+echo $((x))
+IFS=$' \t\n'
+
+set -- 1 + 2
+
+x='d'
+IFS=-
+echo $((x))
+IFS=$' \t\n'
+
+# start of quoting tests; make sure that subscript is treated as double
+# quoted (inhibits word splitting) but that double quotes are silently
+# discarded through quote removal
+
+echo $(( $@ ))
+echo "$(( $@ ))"
+
+echo $(( "$x" ))
+echo $(( "x" ))
+
+unset a foo bar
+a=(zero one two three four five six seven eight nine ten)
+
+echo ${a[0]}
+echo ${a["0"]}
+
+foo=1
+echo ${a[$foo]}
+echo ${a["$foo"]}
+echo ${a[foo]}
+echo ${a["foo"]}
+
+bar=2
+echo ${a[" $bar "]}
+echo ${a[" bar "]}
+
+# tilde expansion is performed by array subscript expansion but not by posix
+# style arithmetic expansion
+
+HOME=2
+echo $(( ~ ))
+
+
diff --git a/tests/array18.sub b/tests/array18.sub
new file mode 100644
index 0000000..9503081
--- /dev/null
+++ b/tests/array18.sub
@@ -0,0 +1,47 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# arrays referenced using @ subscript and positional parameters should behave
+# the same way
+
+foo=(0 0 0); [[ -z ${foo[@]#0} ]]; echo $?
+
+recho "${foo[@]#0}"
+bar=${foo[@]#0}
+recho bar
+recho $bar
+recho -$bar-
+recho "$bar"
+
+qux="${foo[@]#0}"
+recho qux
+recho $qux
+recho -$qux-
+recho "$qux"
+
+unset foo qux bar
+
+set -- 0 0 0
+
+recho "${@#0}"
+bar=${@#0}
+recho bar
+recho $bar
+recho -$bar-
+recho "$bar"
+
+qux="${@#0}"
+recho qux
+recho $qux
+recho -$qux-
+recho "$qux"
diff --git a/tests/array19.sub b/tests/array19.sub
new file mode 100644
index 0000000..1d02f74
--- /dev/null
+++ b/tests/array19.sub
@@ -0,0 +1,175 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# tests for changes to declare and assignment statement arguments post-bash-4.3
+
+unset foo l a b
+
+l="( zeroind )"
+
+unset foo
+declare -a foo
+foo="$l"
+declare -p foo
+
+unset foo
+declare -a foo="$l"
+declare -p foo
+
+unset foo
+declare -a foo=$l
+declare -p foo
+
+b='[0]=bar'
+
+unset foo
+declare -a foo="$b"
+declare -p foo
+
+unset foo
+declare -a foo=("$b")
+declare -p foo
+
+unset foo
+declare -a foo=($b)
+declare -p foo
+
+unset a
+
+declare a='(1 2 3)'
+declare -p a
+unset a
+
+declare -a a
+declare a='(1 2 3)'
+declare -p a
+unset a
+
+declare a='([0]=a [1]=b)'
+declare -p a
+unset a
+
+declare -a a
+declare a='([0]=a [1]=b)'
+declare -p a
+unset a
+
+declare -A a
+declare a='([0]=a [1]=b)'
+declare -p a
+unset a
+unset var value
+
+value='[$(echo total 0)]=1 [2]=2]'
+
+unset var
+declare -a var
+var=($value)
+declare -p var
+
+unset var
+declare -a var=("$value")
+declare -p var
+
+unset var
+declare -a var=($value)
+declare -p var
+
+unset var
+declare -a var="($value)"
+declare -p var
+unset foo value
+
+value="AbCdE"
+
+declare -a foo
+foo=( one two three )
+
+declare -l foo="$value"
+declare -p foo
+
+unset foo
+value='(AbCdE)'
+
+declare -a foo
+foo=( one two three )
+
+declare -l foo="$value"
+declare -p foo
+unset ar
+declare -a ar=(ONE TWO THREE)
+declare -al ar=(${ar[@]})
+declare -p ar 
+unset a
+
+declare -a a
+a[2]=foo
+declare -p a
+
+unset a
+declare -a a
+declare a[2]=foo
+declare -p a
+
+declare a[1]='(var)'
+declare -p a
+
+unset a
+declare a[1]='(var)'
+declare -p a
+unset a
+
+a=(1 2 3)
+a[2]='(1 2 3)'
+
+declare -p a
+
+unset a
+a=(1 2 3)
+declare a[2]='(1 2 3)'
+
+declare -p a
+
+unset a
+a=(1 2 3)
+declare a='(1 2 3)'
+
+declare -p a
+
+unset a
+a=(1 2 3)
+declare 'a=(1 2 3)'
+
+declare -p a
+
+unset a
+declare -a a='(1 2 3)'
+
+declare -p a
+unset a b c d e x y
+
+HOME=/scratch/bash
+x='a b'
+y='($(echo Darwin))'
+
+declare a=$x b=~ c='(1 2)' d='($a)' e=$y
+
+declare -p a b c d e
+
+unset a b c d e
+declare -a a=$x b=~ c='(1 2)' d='($a)' e=$y
+declare -p a b c d e
+
+unset a b c d e
+declare -A a=$x b=~ c='(1 2)' d='($a)' e=$y
+declare -p a b c d e
diff --git a/tests/array2.right b/tests/array2.right
new file mode 100644
index 0000000..b5145c2
--- /dev/null
+++ b/tests/array2.right
@@ -0,0 +1,74 @@
+argv[1] = <a b>
+argv[1] = <ab>
+argv[1] = <a b>
+argv[1] = <a>
+argv[2] = <b>
+argv[1] = <a>
+argv[2] = <b>
+argv[1] = <3>
+argv[1] = <bob>
+argv[1] = <tom dick harry>
+argv[1] = <joe>
+argv[1] = <3>
+argv[1] = <bob>
+argv[1] = <tom dick harry>
+argv[1] = <joe>
+argv[1] = <3>
+argv[1] = <bob>
+argv[1] = <tom dick harry>
+argv[1] = <joe>
+argv[1] = <3>
+argv[1] = <bob>
+argv[1] = <tom dick harry>
+argv[1] = <joe>
+argv[1] = <1>
+argv[1] = <bobtom dick harryjoe>
+argv[1] = <3>
+argv[1] = <bob>
+argv[1] = <tom dick harry>
+argv[1] = <joe>
+argv[1] = <3>
+argv[1] = <bob>
+argv[1] = <tom dick harry>
+argv[1] = <joe>
+argv[1] = <5>
+argv[1] = <bob>
+argv[1] = <tom>
+argv[1] = <dick>
+argv[1] = <5>
+argv[1] = <bob>
+argv[1] = <tom>
+argv[1] = <dick>
+argv[1] = <1>
+argv[1] = <bob>
+argv[2] = <tom>
+argv[3] = <dick>
+argv[4] = <harry>
+argv[5] = <joe>
+argv[1] = <3>
+argv[1] = <bob>
+argv[1] = <tom>
+argv[2] = <dick>
+argv[3] = <harry>
+argv[1] = <joe>
+argv[1] = <a>
+argv[2] = <b>
+argv[3] = <c>
+argv[4] = <d>
+argv[5] = <e>
+argv[1] = <a>
+argv[2] = <b>
+argv[3] = <c>
+argv[4] = <d>
+argv[5] = <e>
+argv[1] = <foo>
+argv[2] = <bar>
+argv[3] = <bam>
+argv[1] = <foobarbam>
+argv[1] = <foo>
+argv[2] = <bar>
+argv[3] = <bam>
+argv[1] = <foo>
+argv[2] = <bar>
+argv[3] = <bam>
+argv[1] = <foo bar bam>
diff --git a/tests/array2.sub b/tests/array2.sub
new file mode 100644
index 0000000..44bb7c5
--- /dev/null
+++ b/tests/array2.sub
@@ -0,0 +1,4 @@
+declare -r []=asdf
+declare -r a[]=asdf
+
+declare -a ''=(a 'b c')
diff --git a/tests/array20.sub b/tests/array20.sub
new file mode 100644
index 0000000..24dff93
--- /dev/null
+++ b/tests/array20.sub
@@ -0,0 +1,47 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# tests to make sure that $* and ${array[*]} expand consistently in `list'
+# and `scalar' contexts
+
+arr=(a b c)
+IFS=+
+
+# these two should both expand to `+' separated strings
+a=${arr[*]} ; echo "$a"
+b=${arr[*]/a/x}; echo "$b"
+
+set -- a b c
+
+# these two should both expand to `+' separated strings
+a=${*} ; echo "$a"
+b=${*/a/x}; echo "$b"
+
+# these two should both expand to `+' separated strings and it should handle
+# characters in IFS as chars in the string
+unset a b
+
+set -- 'a+b' 'c+d' 'e+f'
+a=${*} ; recho "$a"
+b=${*/a/x}; recho "$b"
+
+# now let's make sure that @ always uses space separators even in contexts
+# where we don't do word splitting
+set -- a b c
+a=${@} ; echo "$a"
+b=${@/a/x}; echo "$b"
+
+unset a b
+
+a=${arr[@]} ; echo "$a"
+b=${arr[@]/a/x}; echo "$b"
diff --git a/tests/array21.sub b/tests/array21.sub
new file mode 100644
index 0000000..97ff093
--- /dev/null
+++ b/tests/array21.sub
@@ -0,0 +1,50 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+typeset -a a
+a=(1 2 3 4)
+
+typeset -A A
+A=([one]=1 [two]=2 [three]=3 [four]=4)
+
+unset 'a[0]'
+typeset -p a
+
+scalar=abcd
+echo ${scalar[0]}
+
+unset 'scalar[0]'
+echo ${scalar-unset}
+
+unset 'a[@]'
+typeset -p a
+
+unset 'A[@]'
+typeset -p A
+
+typeset -a a
+a=(1 2 3 4)
+typeset -A A
+A=([one]=1 [two]=2 [three]=3 [four]=4)
+
+# supported, recommended way to unset all array elements
+a=()
+typeset -p a
+A=()
+typeset -p A
+
+declare -a foo
+declare foo='(1 2 3)'
+declare foo[1]='(4 5 6)'
+
+declare -p foo
diff --git a/tests/array22.sub b/tests/array22.sub
new file mode 100644
index 0000000..3374ef2
--- /dev/null
+++ b/tests/array22.sub
@@ -0,0 +1,59 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# This isn't perfect behavior, but it establishes a baseline and will provide
+# a way to detect behavior changes
+
+echo a1
+a[0]= a[1]=; recho "${a[@]:-y}"
+unset a
+
+echo a2
+a[1]=; recho "${a[@]:-y}"
+a[1]=; recho "${a[*]:-z}"
+unset a
+
+echo a3
+a[0]= a[1]=x; recho "${a[@]:-y}"
+unset a
+
+echo a4
+a[0]= a[1]=x; recho ${a[@]:+y}
+unset a
+
+echo p1
+set '' ''
+recho "${@:-y}"
+
+shift $#
+
+echo p2
+set '' x
+recho "${@:-y}"
+
+shift $#
+
+echo p3
+set '' x
+recho ${@:+y}
+
+# problems with * and null expansions dating back to bash's earliest days
+A=(''); set -- ''
+
+echo "<${A[*]:-X}>" "<${*:-X}>" "<${A:-X}>" "<${A[0]:-X}>" 
+
+IFS=
+A=('' ''); set -- '' ''
+B=''
+
+echo "<${A[*]:-X}>" "<${*:-X}>" "<${B:-X}>" "<${B[*]:-X}>"
diff --git a/tests/array23.sub b/tests/array23.sub
new file mode 100644
index 0000000..02d271d
--- /dev/null
+++ b/tests/array23.sub
@@ -0,0 +1,41 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# this captures how bash and ksh93 expand indexed array subscripts in
+# various contexts. if changes are ever made, or an option added to do
+# this differently, the diffs will show up here
+
+typeset -a array
+
+index='$( echo >&2 foo )' # Literal shell code should never be evaluated unless an 'eval' is involved.
+
+echo ${array[ $index ]} # [] expands $index, results in a literal that [] does not re-evaluate.
+echo $(( $index )) # (( )) expands $index, results in a literal that (( )) does not re-evaluate.
+echo $(( array[ $index ] )) # (( )) expands $index, results in a literal that  [] DOES re-evaluate.
+
+(( array[ $index ] ))
+
+typeset -a a
+
+: $(( a[$index]=5 ))
+
+#shopt -s assoc_expand_once
+echo $((1+a[$index]))
+echo $((1+a[\$index]))
+echo "1+${a[$index]}"
+
+# intermediate problems discovered while bash-5.0 was in testing
+a=0
+echo $(( a[a[0]] ))
+echo ${a[a[a[0]]]}
+echo $(( a[a[a[0]]] ))
diff --git a/tests/array24.sub b/tests/array24.sub
new file mode 100644
index 0000000..461b406
--- /dev/null
+++ b/tests/array24.sub
@@ -0,0 +1,60 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+set -- "abc" "def ghi" "jkl"
+A=("$@")
+
+IFS=':'
+
+echo 'IFS=: ${var-$*}'
+unset var; printf '%s\n' ${var-$*}
+printf '%s\n' ${var-${A[*]}}
+
+echo "----"
+echo 'IFS=: ${var=$*}'
+
+unset  var; printf '%s\n' ${var=$*}
+printf 'var=%s\n' "$var"
+
+unset var; printf '%s\n' ${var=${A[*]}}
+printf 'var=%s\n' "$var"
+
+echo "----"
+echo 'IFS=: ${var+$*}'
+
+printf '%s\n' ${var+$*}
+printf '%s\n' ${var+${A[*]}}
+
+echo "----"
+echo 'IFS= ${var-$*}'
+
+IFS=''
+unset var; printf '%s\n' ${var-$*}
+unset var; printf '%s\n' ${var-${A[*]}}
+
+echo "----"
+echo 'IFS= ${var=$*}'
+
+unset var
+printf '%s\n' ${var=$*}
+printf 'var=%s\n' "$var"
+
+unset var
+printf '%s\n' ${var=${A[*]}}
+printf 'var=%s\n' "$var"
+
+echo "----"
+echo 'IFS= ${var+$*}'
+
+printf '%s\n' ${var+$*}
+printf '%s\n' ${var+${A[*]}}
diff --git a/tests/array25.sub b/tests/array25.sub
new file mode 100644
index 0000000..fe6bb34
--- /dev/null
+++ b/tests/array25.sub
@@ -0,0 +1,83 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# tests with blank subscripts, indexed and associative
+
+echo 1. indexed:
+a[0]=0 a[1]=1
+
+v=" "
+
+echo reference:
+
+echo 1. ${a[ ]}
+echo 2. ${a[' ']}
+echo 3. "${a[ ]}"
+echo 4. ${a[$v]}
+echo 5. ${a["$v"]}
+echo 6. "${a[$v]}"
+
+echo assignment:
+
+echo -n 1. ; a[ ]=10 ; typeset -p a ; a[0]=0
+echo -n 2. ; a[" "]=11 ; typeset -p a ; a[0]=0
+echo -n 3. ; a[$v]=12 ; typeset -p a ; a[0]=0
+echo -n 4. ; a["$v"]=13 ; typeset -p a ; a[0]=0
+
+echo arithmetic:
+
+echo -n 1. ; (( a[ ]=10 )); typeset -p a ; a[0]=0
+echo -n 2. ; (( a[" "]=11 )); typeset -p a ; a[0]=0
+echo -n 3. ; (( a[$v]=12 )); typeset -p a ; a[0]=0
+echo -n 4. ; (( a["$v"]=13 )); typeset -p a ; a[0]=0
+echo -n 5. ; let "a[ ]=10" ; typeset -p a ; a[0]=0
+echo -n 6. ; let "a[\" \"]=11" ; typeset -p a ; a[0]=0
+echo -n 7. ; let "a[$v]=12" ; typeset -p a ; a[0]=0
+echo -n 8. ; let "a[\"$v\"]=13" ; typeset -p a ; a[0]=0
+
+unset -v a v
+
+echo 2. associative:
+shopt -s assoc_expand_once
+
+typeset -A a
+a[0]=0 a[1]=1
+
+v=" "
+
+echo reference:
+
+echo 1. ${a[ ]}
+echo 2. ${a[' ']}
+echo 3. "${a[ ]}"
+echo 4. ${a[$v]}
+echo 5. ${a["$v"]}
+echo 6. "${a[$v]}"
+
+echo assignment:
+
+echo -n 1. ; a[ ]=10 ; typeset -p a ; a[0]=0
+echo -n 2. ; a[" "]=11 ; typeset -p a ; a[0]=0
+echo -n 3. ; a[$v]=12 ; typeset -p a ; a[0]=0
+echo -n 4. ; a["$v"]=13 ; typeset -p a ; a[0]=0
+
+echo arithmetic:
+
+echo -n 1. ; (( a[ ]=10 )); typeset -p a ; a[0]=0
+echo -n 2. ; (( a[" "]=11 )); typeset -p a ; a[0]=0
+echo -n 3. ; (( a[$v]=12 )); typeset -p a ; a[0]=0
+echo -n 4. ; (( a["$v"]=13 )); typeset -p a ; a[0]=0
+echo -n 5. ; let "a[ ]=10" ; typeset -p a ; a[0]=0
+echo -n 6. ; let "a[\" \"]=11" ; typeset -p a ; a[0]=0
+echo -n 7. ; let "a[$v]=12" ; typeset -p a ; a[0]=0
+echo -n 8. ; let "a[\"$v\"]=13" ; typeset -p a ; a[0]=0
diff --git a/tests/array26.sub b/tests/array26.sub
new file mode 100644
index 0000000..0f6cc8f
--- /dev/null
+++ b/tests/array26.sub
@@ -0,0 +1,131 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# these should produce the same results
+a=(aa bb)
+set -- aa bb
+
+IFS=+
+
+recho ${a[@]} 
+recho ${a[@]:0} 
+
+recho $@
+recho ${@:1} 
+
+A=${a[*]} B=${a[*]:0}
+recho $* ${*:1}
+recho ${a[*]} ${a[*]:0}
+recho "$A" "$B"
+recho $A $B
+
+unset A B
+
+recho ${@/a/x} 
+recho ${a[@]/a/x} 
+recho "${@/a/x}"
+recho "${a[@]/a/x}"
+
+recho ${*/a/x} 
+recho ${a[*]/a/x} 
+recho "${*/a/x}"
+recho "${a[*]/a/x}"
+
+A=${*/a/x}
+B=${a[*]/a/x}
+
+recho "$A" "$B"
+
+unset A B
+declare -A A
+A[0]=aa
+A[1]=bb
+
+recho ${A[@]/a/x}
+recho "${A[@]/a/x}"
+recho ${A[*]/a/x}
+recho "${A[*]/a/x}"
+
+unset A
+IFS=
+
+recho ${@/a/x}
+recho ${a[@]/a/x}
+recho "${@/a/x}"
+recho "${a[@]/a/x}"
+
+recho ${*/a/x}
+recho ${a[*]/a/x}
+recho "${*/a/x}"
+recho "${a[*]/a/x}"
+
+A=${*/a/x}
+B=${a[*]/a/x}
+
+recho "$A" "$B"
+
+unset A B
+declare -A A
+A[0]=aa
+A[1]=bb
+
+recho ${A[@]/a/x}  
+recho "${A[@]/a/x}" 
+recho ${A[*]/a/x}   
+recho "${A[*]/a/x}"
+
+unset A
+
+IFS=+
+
+recho ${a[@]}
+recho ${a[@],,} 
+recho "${a[@]}"
+recho "${a[@],,}"
+
+A=${a[*]} B=${a[*],,}
+recho $* ${*,,}
+recho ${a[*]} ${a[*],,}
+recho "${a[*]}" "${a[*],,}"
+recho "$A" "$B"
+recho $A $B
+
+unset A B
+declare -A A
+A[0]=aa
+A[1]=bb
+
+recho ${A[@],,}
+recho "${A[@],,}"
+recho ${A[*],,}
+recho "${A[*],,}"
+
+unset A
+
+recho ${a[@]#?}
+recho ${@#?}
+
+A=${a[*]#?} B=${a[*]#?}
+recho ${*#?} ${a[*]#?}
+recho "$A" "$B"
+recho $A $B
+
+unset A B
+declare -A A
+A[0]=aa
+A[1]=bb
+
+recho ${A[@]#?}  
+recho "${A[@]#?}"   
+recho ${A[*]#?}  
+recho "${A[*]#?}" 
diff --git a/tests/array27.sub b/tests/array27.sub
new file mode 100644
index 0000000..44ed444
--- /dev/null
+++ b/tests/array27.sub
@@ -0,0 +1,72 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# tests for `problem' keys when using associative arrays and assoc_expand_once
+# deal with problems for now; this is a placeholder for if and when I fix them
+
+typeset -A a
+shopt -s assoc_expand_once
+
+k='['
+echo $(( a[$k]=7 ))
+
+k=']'
+echo $(( a[$k]=7 ))
+
+unset a
+
+declare -A A
+
+for k in $'\t' ' '; do
+   (( A[$k]=2 ))
+done
+declare -p A
+
+for k in ']' '*' '@'; do
+   (( A[$k]=2 ))
+done
+
+declare -p A
+
+unset A
+declare -A A
+
+for k in $'\t' ' ' ']' '*' '@'; do
+   read "A[$k]" <<< X
+done
+declare -p A
+
+unset A
+declare -A A
+
+for k in $'\t' ' ' ']' '*' '@'; do
+	printf -v "A[$k]" "%s" X
+done
+declare -p A
+
+unset A
+declare -A A
+
+for k in ']' '*' '@'; do
+   declare A[$k]=X
+done
+declare -p A
+
+unset A
+declare -A A
+
+for k in ']' '*' '@'; do
+   declare "A[$k]=X"
+done
+declare -p A
+
diff --git a/tests/array28.sub b/tests/array28.sub
new file mode 100644
index 0000000..e11cdb6
--- /dev/null
+++ b/tests/array28.sub
@@ -0,0 +1,30 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+# tests for assigning empty string array elements without subscripts
+function foo()
+{
+	local bug=("" "5" "" 1 "")
+	declare -a bug2=("")
+	declare -ga bug3=("" "5" "" 1 "")
+	local not_bug=("no" "nulls")
+	local workaround; workaround=("")
+
+	declare -p bug bug2 bug3 not_bug workaround
+}
+
+declare -a bug4=("" "5" "" 1 "")
+declare -p bug4
+
+foo
diff --git a/tests/array3.sub b/tests/array3.sub
new file mode 100644
index 0000000..579b42b
--- /dev/null
+++ b/tests/array3.sub
@@ -0,0 +1,9 @@
+a=(0 1 2 3 4 5 6 7 8 9)
+
+echo ${a[@]: -1}
+
+echo ${a[@]:9}
+echo ${a[@]:10}
+echo ${a[@]:11}
+
+echo ${a[@]:7:3}
diff --git a/tests/array4.sub b/tests/array4.sub
new file mode 100644
index 0000000..443a0fd
--- /dev/null
+++ b/tests/array4.sub
@@ -0,0 +1,45 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# compound assignment parsing problems in bash-3.1-release
+func()
+{
+	local -a x=() y=()
+}
+
+a=() b=()
+eval foo=()
+eval foo=() bar=() qux=( "bash" )
+
+foo=( "bash" )
+eval foo=( "bash" )
+eval bar=( "bash" ) bax=( "bash" )
+
+let a=(5 + 3) b=(4 + 7)
+echo $a $b
+
+typeset -i a b
+a=(5+3) b=(4+7)
+echo $a $b
+
+let a=(4*3)/2
+echo $a
+a=(4*3)/2
+echo $a
+
+LNAME=nordholz
+echo ${LNAME}
+echo ${#LNAME}
+
+echo ${#LNAME[$(( 0 ))]}
+echo ${#LNAME[$(( 0+0 ))]}
diff --git a/tests/array5.sub b/tests/array5.sub
new file mode 100644
index 0000000..0dda696
--- /dev/null
+++ b/tests/array5.sub
@@ -0,0 +1,47 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+: ${TMPDIR:=/tmp}
+
+mkdir $TMPDIR/bash-test-$$
+cd $TMPDIR/bash-test-$$
+
+trap "cd $OLDPWD ; rm -rf $TMPDIR/bash-test-$$" 0 1 2 3 6 15
+
+touch '[3]=abcde'
+
+touch r s t u v
+
+declare -a x=(*)
+
+echo ${x[3]}
+echo ${x[@]}
+
+unset x
+x=(a b c d e)
+
+echo ${x[*]: -1}
+
+unset x[4]
+unset x[2]
+
+x[9]='9'
+
+echo ${x[*]: -1}
+
+TOOLKIT=(1 2 3 4 5 6 7 8 9 10)
+ARRAY="1"
+echo ${TOOLKIT["$ARRAY"]}
+
+exit 0
diff --git a/tests/array6.sub b/tests/array6.sub
new file mode 100644
index 0000000..2c6c350
--- /dev/null
+++ b/tests/array6.sub
@@ -0,0 +1,128 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# test cases for array quoting and escaping fixed post bash-3.2-release
+
+oIFS="$IFS"
+
+a=(a b c)
+echo ${a[@]}
+
+a2=("${a[@]/#/"-iname '"}")
+recho "${a2[@]}"
+
+echo "${dbg-"'hey'"}"
+echo "${dbg-"hey"}"
+echo "${dbg-'"'hey}"
+echo "${dbg-'"hey'}"
+
+unset a a2
+
+IFS=
+a2=(${a[@]/#/"-iname '"})
+recho "${a2[@]}"
+
+IFS="$oIFS"
+unset a a2
+
+a=('a b' 'c d' 'e f')
+
+recho ${a[@]:1:2}
+recho "${a[@]:1:2}"
+
+IFS=
+recho ${a[@]:1:2}
+recho "${a[@]:1:2}"
+
+IFS="$oIFS"
+unset a a2
+
+a=(abc def)
+
+# Prevent word splitting
+#IFS= 
+
+a2=("${a[@]/#/"-iname '"}") 
+recho "${a2[@]}"
+
+eval a2=("${a[@]/#/\"-iname \'\"}") 
+recho "${a2[@]}"
+
+eval a2=("${a[@]/#/"-iname '"}") 
+recho "${a2[@]}"
+
+a2=("${a[@]/#/-iname \'}") 
+recho "${a2[@]}"
+
+eval a2=("${a[@]/#/-iname \'}") 
+recho "${a2[@]}"
+
+set -- abc def
+
+a2=("${@/#/"-iname '"}") 
+recho "${a2[@]}"
+
+eval a2=("${@/#/\"-iname \'\"}") 
+recho "${a2[@]}"
+
+eval a2=("${@/#/"-iname '"}") 
+recho "${a2[@]}"
+
+unset a a2
+
+IFS=
+pat=('*.*')
+case $(ls ${pat[@]} 2>/dev/null) in
+'')	echo '*.* BAD' ;;
+*)	echo '*.* OK' ;;
+esac
+
+IFS="$oIFS"
+unset a a2 pat
+
+IFS=
+
+s='abc'
+
+set - ${s/b/1 2 3}
+echo $#
+echo "$1"
+
+IFS="$oIFS"
+unset s
+
+set -- ab cd ef
+foo="var with spaces"
+
+IFS=
+recho $foo
+recho "$foo"
+
+recho ${foo}"$@"
+recho ${foo}$@
+
+array=(ab cd ef)
+recho ${foo}"${array[@]}"
+recho ${foo}${array[@]}
+
+recho $(echo $foo)"$@"
+recho $(echo $foo)$@
+
+a=('word1 with spaces' 'word2 with spaces')
+set - ${a[@]/word/element}
+echo $#
+recho "$@"
+recho $@
+
+IFS="$oIFS"
+unset a a2 array foo
diff --git a/tests/array7.sub b/tests/array7.sub
new file mode 100644
index 0000000..8935cc2
--- /dev/null
+++ b/tests/array7.sub
@@ -0,0 +1,14 @@
+# these didn't work in versions of bash before bash-4.0
+
+LNAME=nordholz
+
+echo ${LNAME[$(( 0 ))]//h/!}
+echo ${LNAME[$(( 2 ))]//h/!}
+
+echo ${LNAME[$(( 0 ))]##??}
+echo ${LNAME[$(( 2 ))]##??}
+
+echo ${LNAME[$(( 0 ))]:2}
+echo ${LNAME[$(( 0 ))]:2:4}
+echo ${LNAME[$(( 2 ))]:2}
+echo ${LNAME[$(( 2 ))]:2:4}
diff --git a/tests/array8.sub b/tests/array8.sub
new file mode 100644
index 0000000..6e7e2d6
--- /dev/null
+++ b/tests/array8.sub
@@ -0,0 +1,36 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+IFS=/
+declare -a i
+
+i[0]=fooq
+i[1]=
+i[2]=barq
+i[3]=
+recho "${i[*]:0}"
+recho "${i[@]:0}"
+
+recho "${i[*]/q/!}"
+recho "${i[@]/q/!}"
+
+recho "${i[*]#?}"
+recho "${i[@]#?}"
+
+# Need to complete this with case-modifying expansion examples
+recho "${i[*]^?}"
+recho "${i[@]^?}"
+
+recho "${i[*]^^?}"
+recho "${i[@]^^?}"
+
diff --git a/tests/array9.sub b/tests/array9.sub
new file mode 100644
index 0000000..c3aa31d
--- /dev/null
+++ b/tests/array9.sub
@@ -0,0 +1,40 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+echo $(( 0x7e ))
+echo $(( 0x7f ))
+echo $(( 0x80 ))
+
+a=$'\x80'
+recho "$a"
+
+a=( $'\x7e' $'\x7f' $'\x80' )
+
+recho "${a[@]}"
+
+unset a
+a[0]=$'\x7e'
+a[1]=$'\x7f'
+a[2]=$'\x80'
+
+recho "${a[@]}"
+
+b1=$'\x7e'
+b2=$'\x7f'
+b3=$'\x80'
+
+unset a
+a=( "$b1" "$b2" "$b3" )
+
+recho "${a[@]}"
+
diff --git a/tests/assoc.right b/tests/assoc.right
new file mode 100644
index 0000000..e9aa917
--- /dev/null
+++ b/tests/assoc.right
@@ -0,0 +1,260 @@
+declare -A BASH_ALIASES=()
+declare -A BASH_CMDS=()
+declare -A fluff
+declare -A BASH_ALIASES=()
+declare -A BASH_CMDS=()
+declare -A fluff=([foo]="one" [bar]="two" )
+declare -A fluff=([foo]="one" [bar]="two" )
+declare -A fluff=([bar]="two" )
+declare -A fluff=([qux]="assigned" [bar]="newval" )
+./assoc.tests: line 39: chaff: four: must use subscript when assigning associative array
+declare -A BASH_ALIASES=()
+declare -A BASH_CMDS=()
+declare -Ai chaff=([one]="10" [zero]="5" )
+declare -Ar waste=([pid]="42134" [lineno]="41" [source]="./assoc.tests" [version]="4.0-devel" )
+declare -A wheat=([two]="b" [three]="c" [one]="a" [zero]="0" )
+declare -A chaff=(["hello world"]="flip" [one]="10" [zero]="5" )
+./assoc.tests: line 51: waste: readonly variable
+./assoc.tests: line 52: unset: waste: cannot unset: readonly variable
+./assoc.tests: line 53: chaff[*]: bad array subscript
+./assoc.tests: line 54: [*]=12: invalid associative array key
+declare -A chaff=(["hello world"]="flip" [one]="a" )
+flip
+argv[1] = <multiple>
+argv[2] = <words>
+argv[3] = <flip>
+argv[4] = <a>
+argv[1] = <multiple words>
+argv[2] = <flip>
+argv[3] = <a>
+argv[1] = <multiple>
+argv[2] = <words>
+argv[3] = <flip>
+argv[4] = <a>
+argv[1] = <multiple words flip a>
+./assoc.tests: line 71: declare: chaff: cannot destroy array variables in this way
+./assoc.tests: line 73: chaff[*]: bad array subscript
+./assoc.tests: line 74: [*]=12: invalid associative array key
+declare -A wheat=([six]="6" ["foo bar"]="qux qix" )
+argv[1] = <qux>
+argv[2] = <qix>
+argv[1] = <qux qix>
+declare -A wheat=([six]="6" ["foo bar"]="qux qix" )
+argv[1] = <2>
+argv[1] = <7>
+argv[1] = <qux>
+argv[2] = <qix>
+argv[3] = <blat>
+argv[1] = <qux qix blat>
+argv[1] = <16>
+argv[1] = <16>
+argv[1] = <6>
+argv[2] = <flix>
+argv[1] = <six>
+argv[2] = <foo>
+argv[3] = <bar>
+argv[1] = <six>
+argv[2] = <foo bar>
+8
+/usr/local/bin /bin . /usr/bin /usr/ucb /usr/sbin /bin /sbin
+bin bin . bin ucb sbin bin sbin
+bin
+/ / / / / / /
+/
+argv[1] = <bin>
+argv[1] = </>
+argv[1] = <sbin>
+argv[1] = </>
+8
+/usr/local/bin /bin . /usr/bin /usr/ucb /usr/sbin /bin /sbin
+bin bin . bin ucb sbin bin sbin
+/ / / / / / /
+8
+4 -- /bin
+^usr^local^bin ^bin . ^usr^bin ^usr^ucb ^usr^sbin ^bin ^sbin
+^usr^local^bin ^bin . ^usr^bin ^usr^ucb ^usr^sbin ^bin ^sbin
+\usr/local/bin \bin . \usr/bin \usr/ucb \usr/sbin \bin \sbin
+\usr\local\bin \bin . \usr\bin \usr\ucb \usr\sbin \bin \sbin
+\usr\local\bin \bin . \usr\bin \usr\ucb \usr\sbin \bin \sbin
+([a]=1)
+
+foo qux
+/usr/sbin/foo /usr/local/bin/qux
+hits	command
+   0	/usr/sbin/foo
+   0	/bin/sh
+   0	/sbin/blat
+   0	/usr/local/bin/qux
+foo sh blat qux
+/usr/sbin/foo /bin/sh /sbin/blat /usr/local/bin/qux
+
+foo qux
+argv[1] = </usr/sbin/foo>
+argv[2] = </usr/local/bin/qux>
+argv[3] = <-l>
+alias blat='cd /blat ; echo $PWD'
+alias foo='/usr/sbin/foo'
+alias qux='/usr/local/bin/qux -l'
+alias sh='/bin/bash --login -o posix'
+blat foo sh qux
+argv[1] = <cd /blat ; echo $PWD>
+argv[2] = </usr/sbin/foo>
+argv[3] = </bin/bash --login -o posix>
+argv[4] = </usr/local/bin/qux -l>
+outside: outside
+declare -A BASH_ALIASES=()
+declare -A BASH_CMDS=()
+declare -A afoo=([six]="six" ["foo bar"]="foo quux" )
+argv[1] = <inside:>
+argv[2] = <six>
+argv[3] = <foo quux>
+outside 2: outside
+argv[1] = </barq//fooq>
+argv[1] = <>
+argv[2] = <barq>
+argv[3] = <>
+argv[4] = <fooq>
+argv[1] = </bar!//foo!>
+argv[1] = <>
+argv[2] = <bar!>
+argv[3] = <>
+argv[4] = <foo!>
+argv[1] = </arq//ooq>
+argv[1] = <>
+argv[2] = <arq>
+argv[3] = <>
+argv[4] = <ooq>
+argv[1] = </Barq//Fooq>
+argv[1] = <>
+argv[2] = <Barq>
+argv[3] = <>
+argv[4] = <Fooq>
+argv[1] = </BARQ//FOOQ>
+argv[1] = <>
+argv[2] = <BARQ>
+argv[3] = <>
+argv[4] = <FOOQ>
+abc
+def
+def
+./assoc5.sub: line 26: declare: `myarray[foo[bar]=bleh': not a valid identifier
+def bleh abc
+myarray=(["]"]="def" [foo]="bleh" ["a]a"]="abc" ["a]=test1;#a"]="123" )
+
+123
+myarray=(["]"]="def" ["a]=test2;#a"]="def" [foo]="bleh" ["a]a"]="abc" ["a]=test1;#a"]="123" )
+bar"bie
+doll
+declare -A foo=(["bar\"bie"]="doll" )
+bar"bie
+doll
+declare -A foo=(["bar\"bie"]="doll" )
+bar"bie
+doll
+declare -A foo=(["bar\"bie"]="doll" )
+bar"bie
+doll
+declare -A foo=(["bar\"bie"]="doll" )
+bar"bie
+doll
+declare -A foo=(["bar\"bie"]="doll" )
+bar'bie
+doll
+declare -A foo=(["bar'bie"]="doll" )
+bar'bie
+doll
+declare -A foo=(["bar'bie"]="doll" )
+bar'bie
+doll
+declare -A foo=(["bar'bie"]="doll" )
+bar'bie
+doll
+declare -A foo=(["bar'bie"]="doll" )
+bar'bie
+doll
+declare -A foo=(["bar'bie"]="doll" )
+bar$bie
+doll
+declare -A foo=(["bar\$bie"]="doll" )
+bar[bie
+doll
+declare -A foo=(["bar[bie"]="doll" )
+bar`bie
+doll
+declare -A foo=(["bar\`bie"]="doll" )
+bar\]bie
+doll
+declare -A foo=(["bar\\]bie"]="doll" )
+bar${foo}bie
+doll
+declare -A foo=(["bar\${foo}bie"]="doll" )
+bar
+after printf
+after use: 0
+declare -A assoc=([0]="assoc" )
+assoc
+declare -A assoc=([two]="twoless" [three]="three" [one]="onemore" )
+declare -Ar assoc=([two]="twoless" [three]="three" [one]="onemore" )
+declare -A hash=([key]="value1" )
+declare -A hash=([key]="value1 value2" )
+declare -A b=([")"]="" ["\""]="" ["]"]="" ["\\"]="" ["\`"]="" )
+declare -A b=(["]"]="" ["\`"]="" )
+declare -A dict=(["'"]="3" ["\""]="1" ["\\"]="4" ["\`"]="2" )
+./assoc9.sub: line 36: unset: `dict[']': not a valid identifier
+./assoc9.sub: line 36: unset: `dict["]': not a valid identifier
+./assoc9.sub: line 36: unset: `dict[\]': not a valid identifier
+./assoc9.sub: line 36: unset: `dict[`]': not a valid identifier
+declare -A dict=(["'"]="3" ["\""]="1" ["\\"]="4" ["\`"]="2" )
+declare -A dict=(["'"]="3" ["\""]="1" ["\\"]="4" ["\`"]="2" )
+declare -A dict=()
+4
+4
+a[$b]= 5
+declare -A a=(["80's"]="Depeche Mode" )
+./assoc9.sub: line 84: read: `a[80's]': not a valid identifier
+declare -A a
+declare -A a=(["80's"]="Depeche Mode" )
+./assoc9.sub: line 96: printf: `a[80's]': not a valid identifier
+declare -A a
+declare -A a=(["80's"]="Depeche Mode" )
+6
+1
+1+5
+declare -A a=(["\$(date >&2)"]="5" )
+declare -A myarray=([foo]="bleh" ["foo[bar"]="bleh" )
+foo
+./assoc10.sub: line 14: declare: a: cannot convert indexed to associative array
+f: declare -a a
+./assoc10.sub: line 17: declare: a: cannot convert associative to indexed array
+f: declare -A a
+
+f: declare -a a
+main: declare -- a="7"
+f: declare -A a
+main: declare -- a="42"
+declare -A a=([3]="" [1]="2" )
+declare -A foo=([d]="4" [c]="3" [b]="2" [a]="1" )
+foo=( d "4" c "3" b "2" a "1" )
+declare -A foo=(["\\"]="5" ["@"]="3" ["holy hell this works"]="4" ["a b"]="1" ["spa ces"]="2" )
+foo=( echo "\\" "5" "@" "3" "holy hell this works" "4" "a b" "1" "spa ces" "2" )
+./assoc11.sub: line 34: "": bad array subscript
+declare -A foo=([";"]="semicolon" ["]"]="def" [a=b]="assignment" ["a]a"]="abc" ["foo[bar"]="bleh" )
+foo=( ";" "semicolon" "]" "def" a=b "assignment" "a]a" "abc" "foo[bar" "bleh" )
+declare -A foo=(["'"]="squote" ["\""]="dquote" ["\\"]="bslash" ["\`"]="backquote" )
+foo=( "'" "squote" "\"" "dquote" "\\" "bslash" "\`" "backquote" )
+declare -A foo=(["bar]bie"]="doll" ["a]=test1;#a"]="123" ["bar\"bie"]="doll" )
+foo=( "bar]bie" "doll" "a]=test1;#a" "123" "bar\"bie" "doll" )
+declare -A inside=([c]="3" [b]="2" [a]="1" )
+inside=( c "3" b "2" a "1" )
+declare -A dict=(["?"]="quest" ["*"]="star" ["'"]="squote" ["\$"]="dol" ["\""]="dquote" ["\\"]="bslash" ["@"]="at" ["}"]="rbrace" ["{"]="lbrace" ["\`"]="bquote" )
+dict=( "?" "quest" "*" "star" "'" "squote" "\$" "dol" "\"" "dquote" "\\" "bslash" "@" "at" "}" "rbrace" "{" "lbrace" "\`" "bquote" )
+declare -A foo=([two]="" [one]="1" )
+foo=( two "" one "1" )
+rparen dquote rbrace bs
+declare -A a=([")"]="rparen" ["\""]="dquote" ["]"]="rbrace" ["\\"]="bs" )
+")" "rparen" "\"" "dquote" "]" "rbrace" "\\" "bs"
+declare -A a=([")"]="rparen" ["\""]="dquote" ["]"]="rbrace" ["\\"]="bs" )
+declare -A a=([")"]="rparen" ["\""]="dquote" ["]"]="rbrace" ["\\"]="bs" )
+declare -A a=([")"]="rparen" ["\""]="dquote" ["]"]="rbrace" ["\\"]="bs" )
+declare -Arx foo=([two]="2" [three]="3" [one]="1" )
+./assoc11.sub: line 90: foo: readonly variable
diff --git a/tests/assoc.tests b/tests/assoc.tests
new file mode 100644
index 0000000..8d5c892
--- /dev/null
+++ b/tests/assoc.tests
@@ -0,0 +1,246 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# TEST - basic declaration and assignment
+typeset -A fluff
+declare -A
+
+fluff[foo]=one
+fluff[bar]=two
+
+declare -A
+declare -p fluff
+
+unset fluff[foo]
+declare -p fluff
+
+fluff[bar]=newval
+declare fluff[qux]=assigned
+
+declare -p fluff
+
+unset fluff
+
+# TEST - compound assignment and variable attributes
+declare -A wheat chaff
+wheat=( [zero]=0 [one]=a [two]=b [three]=c )
+
+declare -i chaff
+chaff=( [zero]=1+4 [one]=3+7 four )
+
+declare -A waste=( [pid]=42134 [version]=4.0-devel [source]=$0 [lineno]=$LINENO )
+declare -r waste
+
+declare -A
+
+declare +i chaff
+chaff[hello world]=flip
+declare -p chaff
+
+# TEST - errors
+waste[stuff]=other
+unset waste
+chaff[*]=12
+chaff=( [one]=a [*]=12 )
+
+# TEST - key expansion -- no word splitting
+chaff[hello world]=flip
+declare -p chaff
+echo ${chaff[hello world]}
+
+chaff[box]="multiple words"
+
+recho ${chaff[@]}
+recho "${chaff[@]}"
+
+recho ${chaff[*]}
+recho "${chaff[*]}"
+
+unset chaff
+declare -A chaff[200]
+declare +A chaff
+
+chaff[*]=12
+chaff=( [one]=a [*]=12 )
+
+# TEST - keys and values containing spaces
+unset wheat
+declare -A wheat
+wheat=([six]=6 [foo bar]="qux qix" )
+
+declare -p wheat
+
+unset wheat
+declare -A wheat=([six]=6 [foo bar]="qux qix" )
+
+recho ${wheat[foo bar]}
+recho "${wheat[foo bar]}"
+
+declare -p wheat
+
+# TEST - basic expansions: number of elements and value length
+unset wheat
+typeset -A wheat
+wheat=([six]=6 [foo bar]="qux qix" )
+
+recho ${#wheat[@]}
+
+recho ${#wheat[foo bar]}
+
+# TEST - appending assignment operator
+unset wheat
+typeset -A wheat
+wheat=([six]=6 [foo bar]="qux qix" )
+
+wheat[foo bar]+=' blat'
+
+recho ${wheat[foo bar]}
+recho "${wheat[foo bar]}"
+unset wheat
+
+flix=9
+typeset -Ai wheat
+wheat=([six]=6 [foo bar]=flix )
+
+wheat[foo bar]+=7
+
+recho ${wheat[foo bar]}
+recho "${wheat[foo bar]}"
+unset flix wheat
+
+# TEST - index expansion: no word splitting or globbing
+typeset -A wheat
+cd ${TMPDIR:=/tmp}
+touch '[sfiri]'
+wheat=([s*]=6 [foo bar]=flix )
+
+recho ${wheat[@]}
+rm '[sfiri]'
+cd $OLDPWD
+
+# TEST -- associative array keys expansion
+unset wheat
+typeset -A wheat
+
+wheat=([six]=6 [foo bar]=flix )
+
+recho ${!wheat[@]}
+recho "${!wheat[@]}"
+
+# TEST -- associative array pattern removal
+unset xpath
+typeset -A xpath
+
+xpath=( [0]=/bin [one]=/bin [two]=/usr/bin [three]=/usr/ucb [four]=/usr/local/bin)
+xpath+=( [five]=/sbin [six]=/usr/sbin [seven]=. )
+
+echo ${#xpath[@]}
+
+echo ${xpath[@]}
+echo ${xpath[@]##*/}
+echo ${xpath[0]##*/}
+echo ${xpath[@]%%[!/]*}
+echo ${xpath[0]%%[!/]*}
+recho ${xpath##*/}
+recho ${xpath%%[!/]*}
+recho ${xpath[five]##*/}
+recho ${xpath[five]%%[!/]*}
+
+echo ${#xpath[*]}
+
+echo ${xpath[*]}
+echo ${xpath[*]##*/}
+echo ${xpath[*]%%[!/]*}
+
+# TEST -- associative array pattern substitution
+unset xpath
+typeset -A xpath
+
+xpath=( [0]=/bin [one]=/bin [two]=/usr/bin [three]=/usr/ucb [four]=/usr/local/bin)
+xpath+=( [five]=/sbin [six]=/usr/sbin [seven]=. )
+
+echo ${#xpath[@]}
+# default element is "0" (as a string)
+echo ${#xpath} -- ${xpath["0"]}
+
+echo ${xpath[@]//\//^}
+echo "${xpath[@]//\//^}" | cat -v
+
+zecho "${xpath[@]/\//\\}"
+zecho "${xpath[@]//\//\\}"
+zecho "${xpath[@]//[\/]/\\}"
+
+# test assignment to key "0"
+unset T
+declare -A T
+T='([a]=1)'
+echo "${T[@]}"
+unset T
+
+# peculiar ksh93 semantics for unsubscripted assoc variable reference
+declare -A T
+T[0]='zero'
+if [ "$T" != "${T[0]}" ]; then
+	echo 'assoc.tests: $T and ${T[0]} mismatch'
+fi
+
+${THIS_SH} ./assoc1.sub
+
+${THIS_SH} ./assoc2.sub
+
+${THIS_SH} ./assoc3.sub
+
+${THIS_SH} ./assoc4.sub
+
+${THIS_SH} ./assoc5.sub
+
+${THIS_SH} ./assoc6.sub
+
+${THIS_SH} ./assoc7.sub
+
+# test converting between scalars and assoc arrays
+unset assoc
+assoc=assoc
+declare -A assoc
+declare -p assoc
+echo ${assoc[@]}
+
+# weird syntax required to append to multiple existing array elements using
+# compound assignment syntax
+unset assoc
+declare -A assoc 
+assoc=( [one]=one [two]=two [three]=three )
+assoc+=( [one]+=more [two]+=less )
+declare -p assoc
+
+readonly -A assoc
+declare -p assoc
+
+declare -A hash
+
+hash=(["key"]="value1")
+declare -p hash
+hash=(["key"]="${hash["key"]} value2")
+declare -p hash
+
+unset hash
+
+${THIS_SH} ./assoc8.sub
+
+# new shopt option to prevent multiple expansion of assoc array subscripts
+${THIS_SH} ./assoc9.sub
+
+${THIS_SH} ./assoc10.sub
+
+# test assigning associative arrays using compound key/value pair assignments
+${THIS_SH} ./assoc11.sub
diff --git a/tests/assoc1.sub b/tests/assoc1.sub
new file mode 100644
index 0000000..99a6e22
--- /dev/null
+++ b/tests/assoc1.sub
@@ -0,0 +1,29 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+hash -r
+echo ${BASH_CMDS[@]}
+
+hash -p /usr/sbin/foo foo
+hash -p /usr/local/bin/qux qux
+
+echo ${!BASH_CMDS[@]}
+echo ${BASH_CMDS[@]}
+
+BASH_CMDS[blat]=/sbin/blat
+BASH_CMDS[sh]=/bin/sh
+
+hash
+
+echo ${!BASH_CMDS[@]}
+echo "${BASH_CMDS[@]}"
diff --git a/tests/assoc10.sub b/tests/assoc10.sub
new file mode 100644
index 0000000..5b21525
--- /dev/null
+++ b/tests/assoc10.sub
@@ -0,0 +1,30 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+f() { declare -a a; declare -A a; echo -n "$FUNCNAME: " ; declare -p a; }
+f
+
+f() { declare -A a; declare -a a; echo -n "$FUNCNAME: " ; declare -p a; }
+f
+
+echo 
+
+f() { declare -a a; echo -n "$FUNCNAME: " ; declare -p a; }
+a=7
+f
+echo -n 'main: '; declare -p a
+
+f() { declare -A a; echo -n "$FUNCNAME: " ; declare -p a; }
+a=42
+f
+echo -n 'main: '; declare -p a
diff --git a/tests/assoc11.sub b/tests/assoc11.sub
new file mode 100644
index 0000000..13111a5
--- /dev/null
+++ b/tests/assoc11.sub
@@ -0,0 +1,90 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# these tests were previously in array19.sub, but they are acceptable syntax now
+
+declare -A a
+declare a='(1 2 3)'
+declare -p a
+unset a
+
+declare -A foo
+
+v1='spa ces'
+v2=@
+
+foo=(a 1 b 2 c 3 d 4 )
+declare -p foo
+echo foo=\( ${foo[@]@K} \)
+
+foo=('a b' 1 "$v1" 2 "$v2" 3 'holy hell this works' 4 \\ 5)
+declare -p foo
+echo foo=\( echo ${foo[@]@K} \)
+
+foo=( "" null )
+
+foo=('a]a' abc ']' def $(echo 'foo[bar') bleh \; semicolon a=b assignment)
+declare -p foo
+echo foo=\( ${foo[@]@K} \)
+
+foo=('`' backquote '"' dquote "'" squote \\ bslash)
+declare -p foo
+echo foo=\( ${foo[@]@K} \)
+
+bar='a]=test1;#a'
+foo=( $bar 123 bar\"bie doll bar]bie doll )
+declare -p foo
+echo foo=\( ${foo[@]@K} \)
+
+func()
+{
+	declare -A inside=(a 1 b 2 c 3)
+	declare -p inside
+	echo inside=\( ${inside[@]@K} \)
+}
+func
+
+loaddict()
+{
+	dict=( '"' dquote '`' bquote "'" squote '\' bslash)
+	dict+=( '$' dol @ at * star \{ lbrace \} rbrace ? quest)
+
+	declare -p dict
+	echo dict=\( ${dict[@]@K} \)
+}
+declare -A dict
+loaddict
+
+foo=(one 1 two)
+declare -p foo
+echo foo=\( ${foo[@]@K} \)
+
+typeset -A a=( [\\]=bs [\"]=dquote [\)]=rparen [\]]=rbrace )
+echo ${a[@]}
+declare -p a
+
+echo ${a[@]@K}
+echo ${a[@]@A}
+
+eval "${a[@]@A}"
+declare -p a
+
+eval "a=( ${a[@]@K} )"
+declare -p a
+
+unset a foo
+readonly -A foo=( one 1 two 2 three 3 )
+
+export foo
+declare -p foo
+declare foo+=( seven 7 eight 8 )
diff --git a/tests/assoc2.sub b/tests/assoc2.sub
new file mode 100644
index 0000000..470e2c9
--- /dev/null
+++ b/tests/assoc2.sub
@@ -0,0 +1,28 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+echo ${BASH_ALIASES[@]}
+
+alias foo=/usr/sbin/foo
+alias qux='/usr/local/bin/qux -l'
+
+echo ${!BASH_ALIASES[@]}
+recho ${BASH_ALIASES[@]}
+
+BASH_ALIASES[blat]='cd /blat ; echo $PWD'
+BASH_ALIASES[sh]='/bin/bash --login -o posix'
+
+alias -p
+
+echo ${!BASH_ALIASES[@]}
+recho "${BASH_ALIASES[@]}"
diff --git a/tests/assoc3.sub b/tests/assoc3.sub
new file mode 100644
index 0000000..a7eeb26
--- /dev/null
+++ b/tests/assoc3.sub
@@ -0,0 +1,28 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+foo()
+{
+	declare -A afoo=([six]="six" [foo bar]="foo quux")
+
+	declare -A
+	recho inside: "${afoo[@]}"
+}
+
+declare -A afoo=([main]=outside)
+echo outside: "${afoo[@]}"
+
+foo
+
+echo outside 2: "${afoo[@]}"
+
diff --git a/tests/assoc4.sub b/tests/assoc4.sub
new file mode 100644
index 0000000..eff9d0e
--- /dev/null
+++ b/tests/assoc4.sub
@@ -0,0 +1,35 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+IFS=/
+declare -A i
+
+i[0]=fooq
+i[1]=
+i[2]=barq
+i[3]=
+
+recho "${i[*]:0}"
+recho "${i[@]:0}"
+
+recho "${i[*]/q/!}"
+recho "${i[@]/q/!}"
+
+recho "${i[*]#?}"
+recho "${i[@]#?}"
+
+# Need to complete this with case-modifying expansion examples
+recho "${i[*]^?}"
+recho "${i[@]^?}"
+recho "${i[*]^^?}"
+recho "${i[@]^^?}"
diff --git a/tests/assoc5.sub b/tests/assoc5.sub
new file mode 100644
index 0000000..844d944
--- /dev/null
+++ b/tests/assoc5.sub
@@ -0,0 +1,40 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+declare -A myarray
+
+# this needs fixes to skipsubscript
+myarray["a]a"]="abc"
+
+echo ${myarray["a]a"]}
+
+myarray[$(echo ])]=def
+
+echo ${myarray[']']}
+echo ${myarray[\]]}
+
+declare myarray["foo[bar"]=bleh
+myarray["foo"]=bleh
+
+echo "${myarray[@]}"
+
+bar='a]=test1;#a'
+myarray[$bar]=123
+
+set | grep ^myarray=
+echo ${myarray[a]}
+
+echo "${myarray['a]=test1;#a']}"
+myarray['a]=test2;#a']="def"
+
+set | grep ^myarray=
diff --git a/tests/assoc6.sub b/tests/assoc6.sub
new file mode 100644
index 0000000..88b8eaf
--- /dev/null
+++ b/tests/assoc6.sub
@@ -0,0 +1,159 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+declare -A foo
+
+foo=([bar\"bie]=doll)
+
+echo ${!foo[@]}
+echo ${foo[@]}
+
+declare -p foo
+
+unset foo
+declare -A foo=(["bar\"bie"]="doll")
+
+echo ${!foo[@]}
+echo ${foo[@]}
+
+declare -p foo
+
+unset foo
+declare -A foo
+
+foo=(["bar\"bie"]="doll")
+
+echo ${!foo[@]}
+echo ${foo[@]}
+
+declare -p foo
+
+unset foo
+declare -A foo
+
+foo["bar\"bie"]="doll"
+
+echo ${!foo[@]}
+echo ${foo[@]}
+
+declare -p foo
+
+unset foo
+declare -A foo
+
+foo[bar\"bie]="doll"
+
+echo ${!foo[@]}
+echo ${foo[@]}
+
+declare -p foo
+
+unset foo
+declare -A foo
+
+foo=([bar\'bie]=doll)
+
+echo ${!foo[@]}
+echo ${foo[@]}
+
+declare -p foo
+
+unset foo
+declare -A foo=(["bar'bie"]="doll")
+
+echo ${!foo[@]}
+echo ${foo[@]}
+
+declare -p foo
+
+unset foo
+declare -A foo
+
+foo=(["bar'bie"]="doll")
+
+echo ${!foo[@]}
+echo ${foo[@]}
+
+declare -p foo
+
+unset foo
+declare -A foo
+
+foo["bar'bie"]="doll"
+
+echo ${!foo[@]}
+echo ${foo[@]}
+
+declare -p foo
+
+unset foo
+declare -A foo
+
+foo[bar\'bie]="doll"
+
+echo ${!foo[@]}
+echo ${foo[@]}
+
+declare -p foo
+
+unset foo
+declare -A foo
+
+foo=([bar\$bie]=doll)
+
+echo ${!foo[@]}
+echo ${foo[@]}
+
+declare -p foo
+
+unset foo
+declare -A foo=(["bar[bie"]="doll")
+
+echo ${!foo[@]}
+echo ${foo[@]}
+
+declare -p foo
+
+unset foo
+declare -A foo
+
+foo=(["bar\`bie"]="doll")
+
+echo ${!foo[@]}
+echo ${foo[@]}
+
+declare -p foo
+
+unset foo
+declare -A foo
+
+# this doesn't work right without the backslash
+foo["bar\]bie"]="doll"
+
+echo ${!foo[@]}
+echo ${foo[@]}
+
+declare -p foo
+
+unset foo
+declare -A foo
+
+foo[bar\${foo}bie]="doll"
+
+echo ${!foo[@]}
+echo ${foo[@]}
+
+declare -p foo
+
+unset foo
+declare -A foo
diff --git a/tests/assoc7.sub b/tests/assoc7.sub
new file mode 100644
index 0000000..cae57c5
--- /dev/null
+++ b/tests/assoc7.sub
@@ -0,0 +1,29 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# problem with bash versions through bash-4.2
+foo()
+{
+    declare -A hash
+    declare hash[baz]=bar #bash crashes here
+
+    echo ${hash[@]}
+}
+
+foo
+
+declare -a ary
+printf -v ary[0] "%b" ""
+echo "after printf"
+x="${ary[*]}"  # segfaults here
+echo "after use: $?" 
diff --git a/tests/assoc8.sub b/tests/assoc8.sub
new file mode 100644
index 0000000..83b43f4
--- /dev/null
+++ b/tests/assoc8.sub
@@ -0,0 +1,7 @@
+# warnings introduced beginning with bash-4.4-alpha
+
+var=foo; declare -A "arr$var=([x]=y)"
+
+key1=foo key2=bar
+
+declare -A a=([foo]='([bar]=baz)') "b=${a[$key1]}"
diff --git a/tests/assoc9.sub b/tests/assoc9.sub
new file mode 100644
index 0000000..b886718
--- /dev/null
+++ b/tests/assoc9.sub
@@ -0,0 +1,130 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+typeset -A a=( [\\]= [\"]= [\)]= ) b
+for x in "${!a[@]}"; do b[$x]=; done
+b+=([\`]= [\]]=)
+typeset -p b
+for x in "${!a[@]}"; do
+  unset -v 'b[$x]'
+done
+typeset -p b
+
+unset -v a b
+
+loaddict()
+{
+    dict['"']=1
+    dict['`']=2
+    dict["'"]=3
+    dict['\']=4
+    declare -p dict
+}
+
+del()
+{
+	unset -v dict["$1"];
+}
+
+declare -A dict
+loaddict
+for k in "${!dict[@]}"; do del "$k"; done 
+declare -p dict
+
+unset 'dict[@]'
+
+shopt -s assoc_expand_once
+declare -A dict
+loaddict
+for k in "${!dict[@]}"; do del "$k"; done 
+declare -p dict
+
+unset a b dict
+
+typeset -A a
+b="80's"
+
+((++a[$b]))
+
+((++a["$b"]))
+[[ $((++a[$b])) ]]
+[[ $((++a["$b"])) ]]
+echo ${a["$b"]}
+echo ${a[$b]}
+
+let "++a[$b]"
+
+echo 'a[$b]=' "${a[$b]}"
+
+unset a b
+
+declare -A a
+b="80's"
+
+: ${a[$b]:='Depeche Mode'}
+
+declare -p a
+
+unset a b
+shopt -u assoc_expand_once
+
+typeset -A a
+b="80's"
+
+read a[$b] <<<"Depeche Mode"
+typeset -p a
+
+shopt -s assoc_expand_once
+read a[$b] <<<"Depeche Mode"
+typeset -p a
+
+unset a
+shopt -u assoc_expand_once
+
+typeset -A a
+
+printf -v a[$b] "%s" "Depeche Mode"
+typeset -p a
+
+shopt -s assoc_expand_once
+
+printf -v a[$b] "%s" "Depeche Mode"
+typeset -p a
+
+unset a
+
+declare -A a
+x='$(date >&2)'
+a[$x]=5
+
+shopt -s assoc_expand_once
+echo $((1+a[$x]))
+echo $((1+a[\$x]))
+echo "1+${a[$x]}"
+
+declare -p a
+
+shopt -s assoc_expand_once
+declare -A myarray
+
+declare myarray["foo[bar"]=bleh
+myarray["foo"]=bleh
+
+declare -p myarray
+
+key='$(date >&2)'
+declare -A aa
+aa[$key]=foo
+echo "${aa[$key]}"
+
+[[ -v aa[$key] ]] || echo bad assoc expansion
diff --git a/tests/attr.right b/tests/attr.right
new file mode 100644
index 0000000..d2d28b7
--- /dev/null
+++ b/tests/attr.right
@@ -0,0 +1,37 @@
+after f1:declare -ar a=([0]="1")
+./attr.tests: line 17: a: readonly variable
+after f2:declare -ar a=([0]="1")
+./attr.tests: line 18: a: readonly variable
+after f3:declare -ar a=([0]="1")
+./attr.tests: line 19: readonly: a: readonly variable
+after f4:declare -ar a=([0]="1")
+after f2:declare -ar b=([0]="2")
+after f3:declare -ar c=([0]="(3)")
+after f4:declare -ar d=([0]="4")
+declare -r m="4"
+in func:declare -r n="4"
+declare -r n="4"
+./attr1.sub: line 26: p: readonly variable
+declare -r p="1"
+./attr1.sub: line 32: r: readonly variable
+declare -ar r=([0]="1")
+./attr1.sub: line 36: r: readonly variable
+declare -ar r=([0]="1")
+./attr1.sub: line 40: r: readonly variable
+declare -ar r=([0]="1")
+./attr1.sub: line 44: readonly: r: readonly variable
+declare -ar r=([0]="1")
+declare -ar x=([0]="4")
+in func:declare -ar y=([0]="4")
+declare -ar y=([0]="4")
+in func:declare -ar z=([0]="4")
+declare -ar z=([0]="4")
+in func:declare -ar y1=([0]="4")
+declare -ar y1=([0]="4")
+in func:declare -ar z1=([0]="4")
+declare -ar z1=([0]="4")
+declare -x p="4"
+declare -ax r=([0]="4")
+declare -ax r=([0]="(5)")
+declare -ax r=([0]="6")
+declare -ax r=([0]="7")
diff --git a/tests/attr.tests b/tests/attr.tests
new file mode 100644
index 0000000..4874d9a
--- /dev/null
+++ b/tests/attr.tests
@@ -0,0 +1,54 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+a=(outside)
+
+f1() { readonly a=(1) ; }
+f2() { readonly -a a=(2) ; }
+f3() { readonly 'a=(3)' ; }
+f4() { readonly -a 'a=(4)' ; }
+
+f1
+echo -n after f1:
+declare -p a
+f2
+echo -n after f2:
+declare -p a
+f3
+echo -n after f3:
+declare -p a
+f4
+echo -n after f4:
+declare -p a
+
+b=(outside)
+c=(outside)
+d=(outside)
+
+f2() { readonly -a b=(2) ; }
+f3() { readonly 'c=(3)' ; }
+f4() { readonly -a 'd=(4)' ; }
+
+f2
+echo -n after f2:
+declare -p b
+f3
+echo -n after f3:
+declare -p c
+f4
+echo -n after f4:
+declare -p d
+
+${THIS_SH} ./attr1.sub
+${THIS_SH} ./attr2.sub
+
diff --git a/tests/attr1.sub b/tests/attr1.sub
new file mode 100644
index 0000000..4424be9
--- /dev/null
+++ b/tests/attr1.sub
@@ -0,0 +1,68 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+m=1
+readonly m=4
+declare -p m
+
+n=1
+f() { readonly n=4; echo -n in func: ; declare -p n ; }
+f
+declare -p n
+
+p=1
+readonly p
+
+readonly p=4
+declare -p p
+
+r=(1)
+readonly r
+
+f() { readonly r=(4) ; }
+f
+declare -p r
+
+f() { readonly r='(5)' ; }
+f
+declare -p r
+
+f() { readonly -a r=(6) ; }
+f
+declare -p r
+
+f() { readonly -a r='(7)' ; }
+f
+declare -p r
+
+x=(1)
+readonly x=(4)
+declare -p x
+
+y=(1)
+f() { readonly y=(4); echo -n in func: ; declare -p y; }
+f
+declare -p y
+
+z=(1)
+f() { readonly -a z=(4); echo -n in func: ; declare -p z; }
+f
+declare -p z
+
+f() { readonly y1=(4); echo -n in func: ; declare -p y1; }
+f
+declare -p y1
+
+f() { readonly -a z1=(4); echo -n in func: ; declare -p z1; }
+f
+declare -p z1
diff --git a/tests/attr2.sub b/tests/attr2.sub
new file mode 100644
index 0000000..dadca10
--- /dev/null
+++ b/tests/attr2.sub
@@ -0,0 +1,37 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+p=1
+export p
+
+export p=4
+declare -p p
+
+r=(1)
+export r
+
+f() { export r=(4) ; }
+f
+declare -p r
+
+f() { export r='(5)' ; }
+f
+declare -p r
+
+f() { export -a r=(6) ; }
+f
+declare -p r
+
+f() { export -a r='(7)' ; }
+f
+declare -p r
diff --git a/tests/braces.right b/tests/braces.right
new file mode 100644
index 0000000..4017546
--- /dev/null
+++ b/tests/braces.right
@@ -0,0 +1,77 @@
+ffc ffb ffa
+fdg feg ffg
+lxyz nxyz mxyz
+{abc,def}
+{abc}
+{a,b,c,d,e}
+x} y} {a} b} c}
+x,y {abc} trie
+/usr/ucb/ex /usr/ucb/edit /usr/lib/ex /usr/lib/how_ex
+XXXX{a,b,c}
+XXXXa XXXXb XXXXc
+{}
+{ }
+}
+{
+abcd{efgh
+foo 1 2 bar
+foo 1 2 bar
+foo 1 2 bar
+foobar foobaz.
+foobar foobaz
+bazx bazy
+vx vy
+bazx bazy
+1 2 3 4 5 6 7 8 9 10
+0..10 braces
+0 1 2 3 4 5 6 7 8 9 10 braces
+x0y x1y x2y x3y x4y x5y x6y x7y x8y x9y x10y xbracesy
+3
+x3y
+10 9 8 7 6 5 4 3 2 1
+10y 9y 8y 7y 6y 5y 4y 3y 2y 1y
+x10y x9y x8y x7y x6y x5y x4y x3y x2y x1y
+a b c d e f
+f e d c b a
+a ` _ ^ ]  [ Z Y X W V U T S R Q P O N M L K J I H G F E D C B A
+A B C D E F G H I J K L M N O P Q R S T U V W X Y Z [  ] ^ _ ` a
+f
+{1..f}
+{f..1}
+01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20
+-1 -2 -3 -4 -5 -6 -7 -8 -9 -10
+-20 -19 -18 -17 -16 -15 -14 -13 -12 -11 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0
+a-{bd}-c a-{be}-c
+a-{bdef-g-c a-{bdef-i-c
+{klklkl}1 {klklkl}2 {klklkl}3
+{x,x}
+1 3 5 7 9
+-1 -3 -5 -7 -9
+-1 -3 -5 -7 -9
+10 8 6 4 2
+10 8 6 4 2
+1 3 5 7 9 11 13 15 17 19
+1
+100 95 90 85 80 75 70 65 60 55 50 45 40 35 30 25 20 15 10 5 0
+100 95 90 85 80 75 70 65 60 55 50 45 40 35 30 25 20 15 10 5 0
+a b c d e f g h i j k l m n o p q r s t u v w x y z
+a c e g i k m o q s u w y
+z x v t r p n l j h f d b
+2147483645 2147483646 2147483647 2147483648 2147483649
+10 8 6 4 2 0
+10 8 6 4 2 0
+-50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0
+{1..10.f}
+{1..ff}
+{1..10..ff}
+{1.20..2}
+{1..20..f2}
+{1..20..2f}
+{1..2f..2}
+{1..ff..2}
+{1..ff}
+{1..f}
+{1..0f}
+{1..10f}
+{1..10.f}
+{1..10.f}
diff --git a/tests/braces.tests b/tests/braces.tests
new file mode 100644
index 0000000..da0b624
--- /dev/null
+++ b/tests/braces.tests
@@ -0,0 +1,132 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+echo ff{c,b,a}
+echo f{d,e,f}g
+echo {l,n,m}xyz
+echo {abc\,def}
+echo {abc}
+
+echo \{a,b,c,d,e}
+echo {x,y,\{a,b,c}}
+echo {x\,y,\{abc\},trie}
+
+echo /usr/{ucb/{ex,edit},lib/{ex,how_ex}}
+
+echo XXXX\{`echo a b c | tr ' ' ','`\}
+eval echo XXXX\{`echo a b c | tr ' ' ','`\}
+
+echo {}
+echo { }
+echo }
+echo {
+echo abcd{efgh
+
+echo foo {1,2} bar
+echo `zecho foo {1,2} bar`
+echo $(zecho foo {1,2} bar)
+
+var=baz
+varx=vx
+vary=vy
+
+echo foo{bar,${var}.}
+echo foo{bar,${var}}
+
+echo "${var}"{x,y}
+echo $var{x,y}
+echo ${var}{x,y}
+
+unset var varx vary
+
+# new sequence brace operators
+echo {1..10}
+
+# this doesn't work yet
+echo {0..10,braces}
+# but this does
+echo {{0..10},braces}
+echo x{{0..10},braces}y
+
+echo {3..3}
+echo x{3..3}y
+echo {10..1}
+echo {10..1}y
+echo x{10..1}y
+
+echo {a..f}
+echo {f..a}
+
+echo {a..A}
+echo {A..a}
+
+echo {f..f}
+
+# mixes are incorrectly-formed brace expansions
+echo {1..f}
+echo {f..1}
+
+echo 0{1..9} {10..20}
+
+# do negative numbers work?
+echo {-1..-10}
+echo {-20..0}
+
+# weirdly-formed brace expansions -- fixed in post-bash-3.1
+echo a-{b{d,e}}-c
+
+echo a-{bdef-{g,i}-c
+
+echo {"klklkl"}{1,2,3}
+echo {"x,x"}
+
+echo {1..10..2}
+echo {-1..-10..2}
+echo {-1..-10..-2}
+
+echo {10..1..-2}
+echo {10..1..2}
+
+echo {1..20..2}
+echo {1..20..20}
+
+echo {100..0..5}
+echo {100..0..-5}
+
+echo {a..z}
+echo {a..z..2}
+echo {z..a..-2}
+
+# make sure brace expansion handles ints > 2**31 - 1 using intmax_t
+echo {2147483645..2147483649}
+
+# unwanted zero-padding -- fixed post-bash-4.0
+echo {10..0..2}
+echo {10..0..-2}
+echo {-50..-0..5}
+
+# bad
+echo {1..10.f}
+echo {1..ff}
+echo {1..10..ff}
+echo {1.20..2}
+echo {1..20..f2}
+echo {1..20..2f}
+echo {1..2f..2}
+echo {1..ff..2}
+echo {1..ff}
+echo {1..f}
+echo {1..0f}
+echo {1..10f}
+echo {1..10.f}
+echo {1..10.f}
diff --git a/tests/builtins.right b/tests/builtins.right
new file mode 100644
index 0000000..832472f
--- /dev/null
+++ b/tests/builtins.right
@@ -0,0 +1,274 @@
+a
+end-1
+a
+end-2
+a:x
+end-a
+b:x
+end-b
+c:x
+end-c
+end-3
+a:x
+end
+a
+b
+c
+end-1
+a
+b
+c
+end-2
+a:x
+a:y
+a:z
+end-a
+b:x
+b:y
+b:z
+end-b
+c:x
+c:y
+c:z
+end-c
+end-3
+a:x
+b:x
+c:x
+end
+$BVAR
+$BVAR
+$BVAR
+$BVAR
+foo
+bar
+xxx
+0022
+u=rwx,g=rx,o=rx
+0002
+u=rwx,g=rwx,o=rx
+umask 0002
+umask -S u=rwx,g=rwx,o=rx
+u=rwx,g=rwx,o=rwx
+enable .
+enable :
+enable break
+enable continue
+enable eval
+enable exec
+enable exit
+enable export
+enable readonly
+enable return
+enable set
+enable shift
+enable source
+enable times
+enable trap
+enable unset
+enable .
+enable :
+enable break
+enable continue
+enable eval
+enable exec
+enable exit
+enable export
+enable readonly
+enable return
+enable set
+enable shift
+enable source
+enable times
+enable trap
+enable unset
+enable -n test worked
+enable test worked
+specialname
+-specialname
+FOO=BAR
+FOO=BAR
+hash: hash table empty
+0
+AVAR
+foo
+in source.sub2, calling return
+5
+a b c
+a b c
+x y z
+a b c
+a b c
+m n o p
+a b c
+m n o p
+/tmp/bash-dir-a
+/tmp/bash-dir-a
+/tmp/bash-dir-a
+./source5.sub: line 23: /tmp/source-notthere: No such file or directory
+after bad source 1
+./source5.sub: line 30: /tmp/source-notthere: No such file or directory
+one - OK
+0
+0
+two - OK
+0
+three - OK
+0
+four - OK
+0
+abc
+def
+ghi
+after
+one.1 subshell
+two.1 subshell
+three.1 subshell
+four.1 subshell
+one.2 subshell
+two.2 subshell
+three.2 subshell
+four.2 subshell
+x29 - done
+abc
+def
+ghi
+ok
+AVAR
+foo
+foo
+AVAR
+foo
+foo
+AVAR
+foo
+declare -x foo=""
+declare -x FOO="\$\$"
+./builtins.tests: line 226: declare: FOO: not found
+declare -x FOO="\$\$"
+ok
+ok
+./builtins.tests: line 258: kill: 4096: invalid signal specification
+1
+a\n\n\nb
+a
+
+
+b
+before: f = 4
+inside
+after: f = 8 bar = 4
+declare -a c
+declare -A d
+declare -a c=([0]="4")
+declare -A c=([0]="4" )
+declare -a c=([0]="1" [1]="2" [2]="3")
+declare -A c=([two]="2" [three]="3" [one]="1" )
+declare -a c=([0]="1" [1]="2" [2]="3")
+declare -a c=([0]="1" [1]="2" [2]="3")
+unset
+unset
+assoc 1 unset
+array 1 unset
+assoc 2 unset
+array 2 unset
+unset1
+unset2
+1
+1
+1
+1
+assoc A
+array a
+assoc B unset
+array b unset
+scalar 1
+scalar 2
+scalar 3 unset
+argv[1] = <one two three>
+assoc: 3
+array: 3
+scalar: 13
+scalar: 1
+scalar: 0
+scalar: 1
+scalar: 0
+scalar: 0
+all set:
+one
+two
+f1 () 
+{ 
+    echo f1
+}
+f2 () 
+{ 
+    echo f2
+}
+all unset:
+unset1
+unset2
+./builtins6.sub: line 41: declare: f1: not found
+./builtins6.sub: line 41: declare: f2: not found
+all reset:
+one-one
+two-one
+f1 () 
+{ 
+    echo f1
+}
+f2 () 
+{ 
+    echo f2
+}
+vars unset:
+unset1
+unset2
+f1 () 
+{ 
+    echo f1
+}
+f2 () 
+{ 
+    echo f2
+}
+funcs unset:
+one-two
+two-two
+bash: line 1: notthere: No such file or directory
+one
+bash: line 1: notthere: No such file or directory
+two
+bash: line 1: .: notthere: file not found
+one
+bash: line 1: .: notthere: file not found
+0
+0
+0
+0
+argv[1] = <one>
+0
+argv[1] = <two>
+0
+three
+0
+four
+0
+./builtins7.sub: line 19: : command not found
+127
+0
+./builtins7.sub: line 27: notthere: No such file or directory
+after 1
+./builtins7.sub: line 28: notthere: No such file or directory
+after 2
+type is a shell builtin
++ command -v type
+type
++ command command -v type
+type
++ command -p command -v type
+type
++ command -p -- command -v type
+type
++ set +x
+./builtins.tests: line 282: exit: status: numeric argument required
diff --git a/tests/builtins.tests b/tests/builtins.tests
new file mode 100644
index 0000000..00ebc0f
--- /dev/null
+++ b/tests/builtins.tests
@@ -0,0 +1,284 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# tests for miscellaneous builtins not tested elsewhere
+set +p
+set +o posix
+
+ulimit -c 0 2>/dev/null
+
+# check that break breaks loops
+for i in a b c; do echo $i; break; echo bad-$i; done
+echo end-1
+for i in a b c; do echo $i; break 1; echo bad-$i; done
+echo end-2
+for i in a b c; do
+	for j in x y z; do
+		echo $i:$j
+		break
+		echo bad-$i
+	done
+	echo end-$i
+done
+echo end-3
+
+# check that break breaks nested loops
+for i in a b c; do
+	for j in x y z; do
+		echo $i:$j
+		break 2
+		echo bad-$i
+	done
+	echo end-$i
+done
+echo end
+
+# check that continue continues loops
+for i in a b c; do echo $i; continue; echo bad-$i ; done
+echo end-1
+for i in a b c; do echo $i; continue 1; echo bad-$i; done
+echo end-2
+for i in a b c; do
+	for j in x y z; do
+		echo $i:$j
+		continue
+		echo bad-$i-$j
+	done
+	echo end-$i
+done
+echo end-3
+
+# check that continue breaks out of nested loops
+for i in a b c; do
+	for j in x y z; do
+		echo $i:$j
+		continue 2
+		echo bad-$i-$j
+	done
+	echo end-$i
+done
+echo end
+
+# check that `eval' re-evaluates arguments, but `builtin' and `command' do not
+AVAR='$BVAR'
+BVAR=foo
+
+echo $AVAR
+builtin echo $AVAR
+command echo $AVAR
+eval echo \$AVAR
+eval echo $AVAR
+
+# test out eval with a temp environment
+AVAR=bar eval echo \$AVAR
+BVAR=xxx eval echo $AVAR
+
+unset -v AVAR BVAR
+
+# test umask
+mask=$(umask)
+umask 022
+umask
+umask -S
+umask -S u=rwx,g=rwx,o=rx >/dev/null # 002
+umask
+umask -S
+umask -p
+umask -p -S
+umask 0
+umask -S
+umask ${mask}	# restore original mask
+
+# builtin/command without arguments should do nothing.  maybe someday they will
+builtin
+command
+
+# test enable
+enable -ps
+
+enable -aps ; enable -nps
+
+enable -n test
+case "$(type -t test)" in
+builtin)	echo oops -- enable -n test failed ;;
+*)	echo enable -n test worked ;;
+esac
+
+enable test
+case "$(type -t test)" in
+builtin)	echo enable test worked ;;
+*)	echo oops -- enable test failed ;;
+esac
+
+# test options to exec
+(exec -a specialname ${THIS_SH} -c 'echo $0' )
+(exec -l -a specialname ${THIS_SH} -c 'echo $0' )
+# test `clean' environment.  if /bin/sh is bash, and the script version of
+# printenv is run, there will be variables in the environment that bash
+# sets on startup.  Also test code that prefixes argv[0] with a dash.
+(export FOO=BAR ; exec -c -l printenv ) | grep FOO
+(FOO=BAR exec -c printenv ) | grep FOO
+
+(export FOO=BAR ; exec printenv ) | grep FOO
+(FOO=BAR exec printenv ) | grep FOO
+
+# ok, forget everything about hashed commands
+hash -r
+hash
+
+# this had better succeed, since command -p guarantees we will find the
+# standard utilities
+command -p hash rm
+
+# check out source/.
+
+# sourcing a zero-length-file had better not be an error
+rm -f /tmp/zero-length-file
+cp /dev/null /tmp/zero-length-file
+. /tmp/zero-length-file
+echo $?
+rm /tmp/zero-length-file
+
+AVAR=AVAR
+
+. ./source1.sub
+AVAR=foo . ./source1.sub
+
+. ./source2.sub
+echo $?
+
+set -- a b c
+. ./source3.sub
+
+# make sure source with arguments does not change the shell's positional
+# parameters, but that the sourced file sees the arguments as its
+# positional parameters
+echo "$@"
+. ./source3.sub x y z
+echo "$@"
+
+# but if the sourced script sets the positional parameters explicitly, they
+# should be reflected in the calling shell's positional parameters.  this
+# also tests one of the shopt options that controls source using $PATH to
+# find the script
+echo "$@"
+shopt -u sourcepath
+. source4.sub
+echo "$@"
+
+# this is complicated when the sourced scripts gets its own positional
+# parameters from arguments to `.'
+set -- a b c
+echo "$@"
+. source4.sub x y z
+echo "$@"
+
+# test out cd and $CDPATH
+${THIS_SH} ./builtins1.sub
+
+# test behavior of `.' when given a non-existent file argument
+${THIS_SH} ./source5.sub
+
+# test bugs in sourcing non-regular files, fixed post-bash-3.2
+${THIS_SH} ./source6.sub
+
+# test bugs with source called from multiline aliases and other contexts
+${THIS_SH} ./source7.sub
+
+# in posix mode, assignment statements preceding special builtins are
+# reflected in the shell environment.  `.' and `eval' need special-case
+# code.
+set -o posix
+echo $AVAR
+AVAR=foo . ./source1.sub
+echo $AVAR
+
+AVAR=AVAR
+echo $AVAR
+AVAR=foo eval echo \$AVAR
+echo $AVAR
+
+AVAR=AVAR
+echo $AVAR
+AVAR=foo :
+echo $AVAR
+set +o posix
+
+# but assignment statements preceding `export' are always reflected in 
+# the environment
+foo="" export foo
+declare -p foo
+unset foo
+
+# assignment statements preceding `declare' should be displayed correctly,
+# but not persist after the command
+FOO='$$' declare -p FOO
+declare -p FOO
+unset FOO
+
+# except for `declare -x', which should be equivalent to `export'
+FOO='$$' declare -x FOO
+declare -p FOO
+unset FOO
+
+# test out kill -l.  bash versions prior to 2.01 did `kill -l num' wrong
+sigone=$(kill -l | sed -n 's:^ 1) *\([^ 	]*\)[ 	].*$:\1:p')
+
+case "$(kill -l 1)" in
+${sigone/SIG/})	echo ok;;
+*)	echo oops -- kill -l failure;;
+esac
+
+# kill -l and trap -l should display exactly the same output
+sigonea=$(trap -l | sed -n 's:^ 1) *\([^ 	]*\)[ 	].*$:\1:p')
+
+if [ "$sigone" != "$sigonea" ]; then
+	echo oops -- kill -l and trap -l differ
+fi
+
+# POSIX.2 says that exit statuses > 128 are mapped to signal names by
+# subtracting 128 so you can find out what signal killed a process
+case "$(kill -l $(( 128 + 1)) )" in
+${sigone/SIG/})	echo ok;;
+*)	echo oops -- kill -l 129 failure;;
+esac
+
+# out-of-range signal numbers should report the argument in the error
+# message, not 128 less than the argument
+kill -l 4096
+
+# kill -l NAME should return the signal number
+kill -l ${sigone/SIG/}
+
+# test behavior of shopt xpg_echo
+${THIS_SH} ./builtins2.sub
+
+# test behavior of declare -g
+${THIS_SH} ./builtins3.sub
+
+# test behavior of using declare to create variables without assigning values
+${THIS_SH} ./builtins4.sub
+
+# test behavior of set and unset array variables
+${THIS_SH} ./builtins5.sub
+
+# test behavior of unset builtin with -f and -v options
+${THIS_SH} ./builtins6.sub
+
+# test behavior of command builtin after changing it to a pseudo-keyword
+${THIS_SH} ./builtins7.sub
+
+# this must be last -- it is a fatal error
+exit status
+
+echo after bad exit
diff --git a/tests/builtins1.sub b/tests/builtins1.sub
new file mode 100644
index 0000000..52185b5
--- /dev/null
+++ b/tests/builtins1.sub
@@ -0,0 +1,14 @@
+unset CDPATH
+
+MYDIR=$(pwd -P)
+FULLDIR=/tmp/bash-dir-a
+DIR=${FULLDIR##*/}
+
+mkdir $FULLDIR
+CDPATH=.:/tmp
+cd $DIR
+pwd
+echo $PWD
+
+cd "$MYDIR"
+rmdir $FULLDIR
diff --git a/tests/builtins2.sub b/tests/builtins2.sub
new file mode 100644
index 0000000..e4cb32a
--- /dev/null
+++ b/tests/builtins2.sub
@@ -0,0 +1,10 @@
+# test behavior of shopt xpg_echo
+
+USG_ECHO=off
+shopt -q xpg_echo && USG_ECHO=on
+
+shopt -u xpg_echo
+echo 'a\n\n\nb'
+
+shopt -s xpg_echo
+echo 'a\n\n\nb'
diff --git a/tests/builtins3.sub b/tests/builtins3.sub
new file mode 100644
index 0000000..5596c56
--- /dev/null
+++ b/tests/builtins3.sub
@@ -0,0 +1,14 @@
+# declare -g added in bash-4.2
+f=4
+
+foo()
+{
+	declare -g f=8
+	declare -g bar=4
+
+	echo inside
+}
+
+echo before: f = $f
+foo
+echo after: f = $f bar = $bar
diff --git a/tests/builtins4.sub b/tests/builtins4.sub
new file mode 100644
index 0000000..058ee2c
--- /dev/null
+++ b/tests/builtins4.sub
@@ -0,0 +1,57 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+declare -a c
+declare -p c
+
+declare -A d
+declare -p d
+unset c d
+
+declare -a c
+c=4
+declare -p c
+unset c
+
+declare -A c
+c=4
+declare -p c
+unset c
+
+declare -a c
+c=(1 2 3)
+declare -p c
+unset c
+
+declare -A c
+c=([one]=1 [two]=2 [three]=3)
+declare -p c
+unset c
+
+declare -a c
+read -a c < <(echo 1 2 3)
+declare -p c
+unset c
+
+declare -a c
+mapfile -t c < <(echo 1$'\n'2$'\n'3)
+declare -p c
+unset c
+
+unset foo
+declare -A foo
+echo ${foo-unset}
+
+unset foo
+declare -a foo
+echo ${foo-unset}
diff --git a/tests/builtins5.sub b/tests/builtins5.sub
new file mode 100644
index 0000000..d36e03a
--- /dev/null
+++ b/tests/builtins5.sub
@@ -0,0 +1,74 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# a start at a test suite for what it means for an array to be set or unset and
+# how to test that state
+typeset -A A
+A[a]=1
+typeset -a a
+a[1]=1
+
+if [ -v A ]; then echo assoc 1; else echo assoc 1 unset; fi
+if [ -v a ]; then echo array 1; else echo array 1 unset; fi
+
+if [ -v "${A[@]}" ]; then echo assoc 2; else echo assoc 2 unset; fi
+if [ -v "${a[@]}" ]; then echo array 2; else echo array 2 unset; fi
+
+echo ${A-unset1}
+echo ${a-unset2}
+
+echo ${A[@]-unset3}
+echo ${a[@]-unset4}
+
+echo ${#A[@]}
+echo ${#a[@]}
+
+typeset -A B
+typeset -a b
+
+scalar1=foo
+scalar2=
+
+if [ -v A[@] ]; then echo assoc A; else echo assoc A unset; fi
+if [ -v a[@] ]; then echo array a; else echo array a unset; fi
+
+if [ -v B[@] ]; then echo assoc B; else echo assoc B unset; fi
+if [ -v b[@] ]; then echo array b; else echo array b unset; fi
+
+if [ -v scalar1[@] ]; then echo scalar 1; else echo scalar 1 unset; fi
+if [ -v scalar2[@] ]; then echo scalar 2; else echo scalar 2 unset; fi
+if [ -v scalar3[@] ]; then echo scalar 3; else echo scalar 3 unset; fi
+
+unset a A
+declare -A assoc=([one]=one [two]=two [three]=three)
+declare -a array=(one two three)
+
+scalar="one two three"
+scalar2=
+
+recho "${scalar[@]}"
+
+echo assoc: ${#assoc[@]}
+echo array: ${#array[@]}
+
+echo scalar: ${#scalar}
+echo scalar: ${#scalar[@]}
+
+echo scalar: ${#scalar2}
+echo scalar: ${#scalar2[@]}
+
+echo scalar: ${#scalar3}
+echo scalar: ${#scalar3[@]}
+
+
+
diff --git a/tests/builtins6.sub b/tests/builtins6.sub
new file mode 100644
index 0000000..d4fdf4a
--- /dev/null
+++ b/tests/builtins6.sub
@@ -0,0 +1,81 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+f1()
+{
+	echo f1
+}
+
+f2()
+{
+	echo f2
+}
+
+v1=one
+v2=two
+
+echo all set:
+
+echo ${v1-unset1}
+echo ${v2-unset2}
+
+declare -f -p f1 f2
+
+unset v1 f1 v2 f2
+
+echo all unset:
+
+echo ${v1-unset1}
+echo ${v2-unset2}
+
+declare -f -p f1 f2
+
+f1()
+{
+	echo f1
+}
+
+f2()
+{
+	echo f2
+}
+
+v1=one-one
+v2=two-one
+
+echo all reset:
+echo ${v1-unset1}
+echo ${v2-unset2}
+
+declare -f -p f1 f2
+
+unset -v v1 f1 v2 f2
+
+echo vars unset:
+
+echo ${v1-unset1}
+echo ${v2-unset2}
+
+declare -f -p f1 f2
+
+v1=one-two
+v2=two-two
+
+unset -f v1 f1 v2 f2
+
+echo funcs unset:
+
+echo ${v1-unset1}
+echo ${v2-unset2}
+
+declare -f f1 f2
diff --git a/tests/builtins7.sub b/tests/builtins7.sub
new file mode 100644
index 0000000..67e5e61
--- /dev/null
+++ b/tests/builtins7.sub
@@ -0,0 +1,38 @@
+: ${THIS_SH:=./bash}
+
+${THIS_SH} -c 'command . notthere ; echo one' bash
+${THIS_SH} -c '. notthere ; echo two' bash
+
+${THIS_SH} -o posix -c 'command . notthere ; echo one' bash
+${THIS_SH} -o posix -c '. notthere ; echo two' bash
+
+command ; echo $?
+command -- ; echo $?
+command -p ; echo $?
+command -p -- ; echo $?
+
+command recho one; echo $?
+command -- recho two; echo $?
+command -p echo three; echo $?
+command -p -- echo four ; echo $?
+
+command ''
+echo $?
+
+command -p
+echo $?
+
+${THIS_SH} -c 'set -e ; command false ; echo after' bash
+
+command command command -p . notthere ; echo after 1
+command -p command command . notthere ; echo after 2
+
+command -p command -V type
+
+set -x
+command -v type
+command command -v type
+command -p command -v type
+command -p -- command -v type
+set +x
+
diff --git a/tests/case.right b/tests/case.right
new file mode 100644
index 0000000..557bcad
--- /dev/null
+++ b/tests/case.right
@@ -0,0 +1,62 @@
+fallthrough
+to here
+and here
+retest
+and match
+no more clauses
+1.0
+./case.tests: line 42: xx: readonly variable
+1.1
+matches 1
+no
+no
+no
+no
+no
+ok
+ok 1
+ok 2
+ok 3
+ok 4
+ok 5
+ok 6
+ok 7
+ok 8
+ok 9
+mysterious 1
+mysterious 2
+argv[1] = <\a\b\c\^A\d\e\f>
+argv[1] = <\a\b\c\^A\d\e\f>
+argv[1] = <abc^Adef>
+ok 1
+ok 2
+ok 3
+ok 4
+ok 5
+ok 6
+ok 7
+ok 8
+--- testing: soh
+ok1ok2ok3ok4ok5
+ok1ok2ok3ok4ok5
+ok1ok2ok3ok4ok5
+ok1ok2ok3ok4ok5
+ok1ok2ok3ok4ok5
+ok1ok2ok3ok4ok5
+ok1ok2ok3ok4ok5
+--- testing: stx
+ok1ok2ok3ok4ok5
+ok1ok2ok3ok4ok5
+ok1ok2ok3ok4ok5
+ok1ok2ok3ok4ok5
+ok1ok2ok3ok4ok5
+ok1ok2ok3ok4ok5
+ok1ok2ok3ok4ok5
+--- testing: del
+ok1ok2ok3ok4ok5
+ok1ok2ok3ok4ok5
+ok1ok2ok3ok4ok5
+ok1ok2ok3ok4ok5
+ok1ok2ok3ok4ok5
+ok1ok2ok3ok4ok5
+ok1ok2ok3ok4ok5
diff --git a/tests/case.tests b/tests/case.tests
new file mode 100644
index 0000000..2ffcb90
--- /dev/null
+++ b/tests/case.tests
@@ -0,0 +1,69 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+case foo in
+bar)	echo skip ;;
+foo)	echo fallthrough ;&
+bax)	echo to here ;&
+qux)	echo and here;;
+fop)	echo but not here;;
+esac
+
+case foobar in
+bar)	echo skip ;;
+foo*)	echo retest ;;&
+*bar)	echo and match ;;&
+qux)	echo but not this ;;
+esac
+
+case a in
+a)	echo no more clauses;&
+esac
+
+x=0 y=1
+case 1 in
+  $((y=0)) ) ;;
+  $((x=1)) ) ;&
+  $((x=2)) ) echo $x.$y ;;
+esac
+
+unset x
+readonly xx=1
+case 1 in $((xx++)) ) echo hi1 ;; *) echo hi2; esac
+echo ${xx}.$?
+
+unset var empty
+
+var=
+case ']' in
+[$var]*[$var])	echo matches 1;;
+*)		echo no match 1 ;;
+esac
+
+case abc in ( [] ) echo yes ;; ( * ) echo no ;; esac
+empty=''
+case abc in ( ["$empty"] ) echo yes ;; ( * ) echo no ;; esac
+
+case abc in ( [] | [!a-z]* ) echo yes ;; ( * ) echo no ;; esac
+empty=''
+case abc in ( ["$empty"] | [!a-z]* ) echo yes ;; ( * ) echo no ;; esac
+
+case abc in (["$empty"]|[!a-z]*) echo yes ;; (*) echo no ;; esac
+
+case " " in ( [" "] ) echo ok;; ( * ) echo no;; esac
+
+# tests of quote removal and pattern matching
+${THIS_SH} ./case1.sub
+${THIS_SH} ./case2.sub
+${THIS_SH} ./case3.sub
+${THIS_SH} ./case4.sub
diff --git a/tests/case1.sub b/tests/case1.sub
new file mode 100644
index 0000000..8077111
--- /dev/null
+++ b/tests/case1.sub
@@ -0,0 +1,77 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+x='\x'
+
+case x in
+\x)	echo ok 1;;
+*)	echo bad 1;;
+esac
+
+case x in
+$x)	echo ok 2;;
+*)	echo bad 2;;
+esac
+
+case $x in
+\x)	echo bad 3;;
+\\x)	echo ok 3 ;;
+*)	echo bad 3.1 ;;
+esac
+
+case $x in
+\\$x)	echo ok 4 ;;
+x)	echo bad 4;;
+$x)	echo bad 4.1 ;;
+*)	echo bad 4.2;;
+esac
+
+case x in
+\\x)	echo bad 5;;
+\x)	echo ok 5;;
+*)	echo bad 5.1;;
+esac
+
+case x in
+\\x)	echo bad 6;;
+x)	echo ok 6;;
+*)	echo bad 6.1;;
+esac
+
+case x in
+$x)	echo ok 7 ;;
+\\$x)	echo bad 7 ;;
+*)	echo bad 7.1 ;;
+esac
+
+case x in
+\x)	echo ok 8 ;;
+\\x)	echo bad 8 ;;
+*)	echo bad 8.1 ;;
+esac
+
+case \x in
+\x)	echo ok 9 ;;
+\\x)	echo bad 9 ;;
+*)	echo bad 9.1 ;;
+esac
+
+case $x in
+$x)	echo oops 1 ;;
+*)	echo mysterious 1 ;;
+esac
+
+case \x in
+\x)	echo mysterious 2 ;;
+*)	echo oops 2 ;;
+esac
diff --git a/tests/case2.sub b/tests/case2.sub
new file mode 100644
index 0000000..6c3be38
--- /dev/null
+++ b/tests/case2.sub
@@ -0,0 +1,65 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+x=$'\\a\\b\\c\\\001\\d\\e\\f'
+y='\a\b\c\
\d\e\f'
+z=$'abc\001def'
+
+recho "$x"
+recho "$y"
+recho "$z"
+
+case $'abc\001def' in
+$x) echo ok 1 ;;
+*) echo oops 1;;
+esac
+
+case $z in
+$x) echo ok 2 ;;
+*) echo oops 2;;
+esac
+
+case $'abc\001def' in
+$y) echo ok 3 ;;
+*) echo oops 3;;
+esac
+
+case $z in
+$y) echo ok 4 ;;
+*) echo oops 4;;
+esac
+
+# no backslash before \001
+x=$'\\a\\b\\c\001\\d\\e\\f'
+y='\a\b\c
\d\e\f'
+
+case $'abc\001def' in
+$x) echo ok 5 ;;
+*) echo oops 5;;
+esac
+
+case $z in
+$x) echo ok 6 ;;
+*) echo oops 6;;
+esac
+
+case $'abc\001def' in
+$y) echo ok 7 ;;
+*) echo oops 7;;
+esac
+
+case $z in
+$y) echo ok 8 ;;
+*) echo oops 8;;
+esac
+
diff --git a/tests/case3.sub b/tests/case3.sub
new file mode 100644
index 0000000..1e8d785
--- /dev/null
+++ b/tests/case3.sub
@@ -0,0 +1,52 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+testmatch() {
+	case $1 in
+	( $2 ) printf ok1 ;;
+	( * ) printf fail1 ;;
+	esac
+	case $1,$2 in
+	( $2,"$2" ) printf ok2 ;;
+	( * ) printf fail2 ;;
+	esac
+	case $1, in
+	( $2, ) printf ok3 ;;
+	( * ) printf fail3 ;;
+	esac
+	case ,$2 in
+	( ,"$2" ) printf ok4 ;;
+	( * ) printf fail4 ;;
+	esac
+	case "$1,$2" in
+	( $2,"$2" ) printf ok5 ;;
+	( * ) printf fail5 ;;
+	esac
+	echo
+}
+
+for c in $'\1' $'\2' $'\177'; do
+	echo -n "--- testing: "
+	echo "$c" | od -t a | awk 'NR==1 { print $2 } '
+	testmatch "${c}" "\\${c}"
+	testmatch "${c}x" "\\${c}\\x"  # bash-git fails case 2 and 5 for $'\1'
+	testmatch "${c}x" "${c}\\x"
+	testmatch "${c}x" "${c}x"
+	testmatch "${c}x" "\\${c}x"
+	testmatch "x${c}" "\\x\\${c}"
+	testmatch "x${c}" "x\\${c}"
+done
+
+match() { case $1 in ( $2 ) ;; ( * ) return 1 ;; esac; } 
+match $'? *x\1y\177z' $'??\\*\\x\\\1\\y\\\177\\z' || echo bad 6
diff --git a/tests/case4.sub b/tests/case4.sub
new file mode 100644
index 0000000..ababeb9
--- /dev/null
+++ b/tests/case4.sub
@@ -0,0 +1,38 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+shopt -s -o posix
+two="t w  o"
+ten="t   e
+n"
+set 1 "$two" 3 4 5 6 7 8 9 "$ten"
+
+unset IFS
+expvar="$*"
+case $* in
+"$expvar") ;;
+*) echo "failed 1" ;;
+esac
+
+case $* in
+$expvar) ;;
+*) echo "failed 2" ;;
+esac
+
+alias foo='oneword'
+foo_word='foo'
+case "$foo_word"
+in
+        foo) ;;
+	*) echo failed 3;;
+esac
diff --git a/tests/casemod.right b/tests/casemod.right
new file mode 100644
index 0000000..df12475
--- /dev/null
+++ b/tests/casemod.right
@@ -0,0 +1,47 @@
+Acknowledgement
+ACKNOWLEDGEMENT
+Oenophile
+OEnOphIlE
+aCKNOWLEDGEMENT
+acknowledgement
+oENOPHILE
+oENOPHILE
+oeNoPHiLe
+Acknowledgement Oenophile
+AcknOwlEdgEmEnt OEnOphIlE
+aCKNOWLEDGEMENT oENOPHILE
+aCKNoWLeDGeMeNT oeNoPHiLe
+aCKNOWLEDGEMENT oENOPHILE
+acknowledgement oenophile
+Oenophile Acknowledgement
+OENOPHILE ACKNOWLEDGEMENT
+Oenophile Acknowledgement
+OEnOphIlE AcknOwlEdgEmEnt
+oENOPHILE aCKNOWLEDGEMENT
+oenophile acknowledgement
+oENOPHILE aCKNOWLEDGEMENT
+oeNoPHiLe aCKNoWLeDGeMeNT
+Acknowledgement Oenophile
+ACKNOWLEDGEMENT OENOPHILE
+acknowledgement oenophile
+ackNowLEdgEmENT oENophiLE
+acknowledgement oenophile
+ackNowLEdgEmENT oENophiLE
+acknowledgement oenophile
+acknowledgement oenophile
+acknowledgement oenophile
+acknowledgement oenophile
+Acknowledgement Oenophile
+ACKNOWLEDGEMENT OENOPHILE
+BE CONSERVATIVE IN WHAT YOU SEND AND LIBERAL IN WHAT YOU ACCEPT
+be conservative in what you send and liberal in what you accept
+Be conservative in what you send and liberal in what you accept
+Be conservative in what you send and liberal in what you accept
+be Conservative in what you send and Liberal in what you accept
+be conservative in what you send and liberal in what you accept
+Be Conservative in what you send and Liberal in what you accept
+BE CONSERVATIVE IN WHAT YOU SEND AND LIBERAL IN WHAT YOU ACCEPT
+Be conservative in what you send and liberal in what you accept
+BE CONSERVATIVE IN WHAT YOU SEND AND LIBERAL IN WHAT YOU ACCEPT
+abcdexyz
+ABCDEXYZ
diff --git a/tests/casemod.tests b/tests/casemod.tests
new file mode 100644
index 0000000..56ab20d
--- /dev/null
+++ b/tests/casemod.tests
@@ -0,0 +1,126 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+S1=acknowledgement
+S2=oenophile
+
+echo ${S1^}
+echo ${S1^^}
+
+echo ${S2^[aeiou]}
+echo ${S2^^[aeiou]}
+
+U1=${S1^^}
+U2=${S2^^}
+
+echo ${U1,}
+echo ${U1,,}
+
+echo ${U2,}
+echo ${U2,[AEIOU]}
+echo ${U2,,[AEIOU]}
+
+A1=( $S1 $S2 )
+
+echo ${A1[@]^[aeiou]}
+echo ${A1[@]^^[aeiou]}
+
+A2=( $U1 $U2 )
+
+echo ${A2[@],[AEIOU]}
+echo ${A2[@],,[AEIOU]}
+
+echo ${A2[@],?}
+echo ${A2[@],,?}
+
+declare -A AA1 AA2
+
+AA1[ack]=$S1
+AA1[oen]=$S2
+
+echo ${AA1[@]^}
+echo ${AA1[@]^^}
+
+echo ${AA1[@]^[aeiou]}
+echo ${AA1[@]^^[aeiou]}
+
+AA2[ACK]=$U1
+AA2[OEN]=$U2
+
+echo ${AA2[@],}
+echo ${AA2[@],,}
+
+echo ${AA2[@],[AEIOU]}
+echo ${AA2[@],,[AEIOU]}
+
+set -- $S1 $S2
+
+echo ${@^}
+echo ${@^^}
+
+
+echo ${S1^[rstlne]} ${S2^[rstlne]}
+echo ${S1^^[rstlne]} ${S2^^[rstlne]}
+
+echo ${@^[rstlne]}
+echo ${@^^[rstlne]}
+
+echo ${S1,[rstlne]} ${S2,[rstlne]}
+echo ${S1,,[rstlne]} ${S2,,[rstlne]}
+
+echo ${@,[rstlne]}
+echo ${@,,[rstlne]}
+
+echo ${@^?}
+echo ${@^^?}
+
+# make sure that multiple words in the string are handled as other expansions
+TEXT="Be Conservative in what you send and Liberal in what you accept"
+TEXT2="be conservative in what you send and liberal in what you accept"
+
+declare -u foo
+foo=$TEXT
+echo $foo
+
+declare -l bar
+bar=$TEXT
+echo $bar
+
+declare -c qux
+qux=$TEXT
+echo $qux
+qux=$TEXT2
+echo $qux
+
+echo ${TEXT,}
+echo ${TEXT,,}
+
+echo ${TEXT^}
+echo ${TEXT^^}
+
+echo ${TEXT2^}
+echo ${TEXT2^^}
+
+M1=${S1^^[aeiou]}
+M2=${U2,,[AEIOU]}
+
+#echo ${M1} ${M1~}
+#echo ${M2} ${M2~~}
+
+declare -l lower=aBcDe
+lower+=XyZ
+echo $lower
+
+declare -u upper=aBcDe
+upper+=xYZ
+echo $upper
diff --git a/tests/complete.right b/tests/complete.right
new file mode 100644
index 0000000..5bc89a0
--- /dev/null
+++ b/tests/complete.right
@@ -0,0 +1,63 @@
+complete -f -X '!*.+(ps|PS)' gs
+complete -c nice
+complete -e printenv
+complete -c gdb
+complete -f -X '!*.texi*' texi2html
+complete -j -P '%' fg
+complete -g groupmod
+complete -f -X '!*.dvi' dvips
+complete -f -X '!*.texi*' texi2dvi
+complete -v -S '=' typeset
+complete -f .
+complete -c nohup
+complete -a unalias
+complete -g groupdel
+complete -A hostname telnet
+complete -v -S '=' declare
+complete -v -S '=' export
+complete -v -S '=' local
+complete -v -S '=' readonly
+complete -o bashdefault -o filenames -o nospace -F _comp_cd cd
+complete -f -X '!*.dvi' xdvi
+complete -c type
+complete -f ln
+complete -f -X '!*.+(gz|tgz)' gunzip
+complete -f -X '!*.texi*' makeinfo
+complete -u su
+complete -j -P '%' jobs
+complete -o dirnames -o filenames -o nospace -d popd
+complete -A signal trap
+complete -o dirnames -o filenames -o nospace -d pushd
+complete -f -X '!*.pdf' acroread
+complete -v unset
+complete -f -X '!*.+(ps|PS)' ghostview
+complete -j -W '$(ps -x | tail +2 | cut -c1-5)' -P '%' wait
+complete -A hostname rsh
+complete -c exec
+complete -f -X '!*.Z' zmore
+complete -A signal kill
+complete -j -P '%' disown
+complete -f -X '!*.+(ps|PS)' gs
+complete -f -X '!*.+(ps|PS)' gv
+complete -f source
+complete -c make
+complete -A stopped -P '%' bg
+complete -f cat
+complete -d mkdir
+complete -A helptopic help
+complete -c eval
+complete -f chown
+complete -v read
+complete -c -k time
+complete -f -X '!*.Z' zcat
+complete -f gzip
+complete -W '"${GROUPS[@]}"' newgrp
+complete -f -X '!*.Z' uncompress
+complete -d rmdir
+complete -A shopt shopt
+complete -A hostname ftp
+complete -f more
+complete -A hostname rlogin
+complete -v getopts
+complete -f -X '!*.+(gz|tgz)' gzcat
+./complete.tests: line 123: complete: notthere: no completion specification
diff --git a/tests/complete.tests b/tests/complete.tests
new file mode 100644
index 0000000..36a3983
--- /dev/null
+++ b/tests/complete.tests
@@ -0,0 +1,126 @@
+#  Chet Ramey <chet.ramey@case.edu>
+#
+#  Copyright 2002-2020 Chester Ramey
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   TThis program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software Foundation,
+#   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+complete
+
+# from zsh, just for testing
+complete -A stopped -P '%' bg
+complete -j -P '%' fg jobs disown
+# this is wrong at this point
+complete -j -P '%' -W '$(ps -x | tail +2 | cut -c1-5)' wait
+complete -c type
+complete -a unalias
+complete -v getopts read unset
+complete -v -S '=' declare export local readonly typeset
+complete -f -- . source
+complete -A shopt shopt
+complete -e printenv
+
+complete -A helptopic help
+
+complete -c nohup exec nice eval
+complete -c -k time
+
+complete -A signal trap kill
+
+complete -f chown ln more cat
+complete -d mkdir rmdir
+
+complete -f -X '!*.+(gz|tgz)' gunzip gzcat zcat zmore
+complete -f -X '!*.Z' uncompress zmore zcat
+complete -f gzip
+
+complete -o dirnames -o filenames -o nospace -d pushd popd
+
+_comp_cd()
+{
+	local IFS=$' \t\n'	# normalize IFS
+	local cur _skipdot _cdpath
+	local i j k
+
+	# Tilde expansion, with side effect of expanding tilde to full pathname
+	case "$2" in
+	\~*)	eval cur="$2" ;;
+	*)	cur=$2 ;;
+	esac
+
+	# no cdpath or absolute pathname -- straight directory completion
+	if [[ -z "${CDPATH:-}" ]] || [[ "$cur" == @(./*|../*|/*) ]]; then
+		# compgen prints paths one per line; could also use while loop
+		IFS=$'\n'
+		COMPREPLY=( $(compgen -d -- "$cur") )
+		IFS=$' \t\n'
+	# CDPATH+directories in the current directory if not in CDPATH
+	else
+		IFS=$'\n'
+		_skipdot=false
+		# preprocess CDPATH to convert null directory names to .
+		_cdpath=${CDPATH/#:/.:}
+		_cdpath=${_cdpath//::/:.:}
+		_cdpath=${_cdpath/%:/:.}
+		for i in ${_cdpath//:/$'\n'}; do
+			if [[ $i -ef . ]]; then _skipdot=true; fi
+			k="${#COMPREPLY[@]}"
+			for j in $( compgen -d -- "$i/$cur" ); do
+				COMPREPLY[k++]=${j#$i/}		# cut off directory
+			done
+		done
+		$_skipdot || COMPREPLY+=( $(compgen -d -- "$cur") )
+		IFS=$' \t\n'
+	fi
+
+	# variable names if appropriate shell option set and no completions
+	if shopt -q cdable_vars && [[ ${#COMPREPLY[@]} -eq 0 ]]; then
+		COMPREPLY=( $(compgen -v -- "$cur") )
+	fi
+
+	# append slash to passed directory name that is the only completion.
+	# readline will not do this if we complete from CDPATH
+	if [[ ${#COMPREPLY[@]} -eq 1 ]]; then
+		i=${COMPREPLY[0]}	# shorthand
+		if [[ "$cur" == "$i" ]] && [[ "$i" != "*/" ]]; then
+			COMPREPLY[0]+=/
+		fi
+	fi
+	return 0
+}
+
+complete -o filenames -o nospace -o bashdefault -F _comp_cd cd
+
+complete -A hostname rsh telnet rlogin ftp
+
+complete -u su
+complete -W '"${GROUPS[@]}"' newgrp
+complete -g groupdel groupmod
+
+complete -f -X '!*.+(ps|PS)' gs gv ghostview
+complete -f -X '!*.dvi' dvips xdvi
+complete -f -X '!*.pdf' acroread
+
+complete -f -X '!*.texi*' makeinfo texi2dvi texi2html
+
+complete -c gdb make
+
+complete -p gs
+complete -p
+
+complete -r xdvi
+complete -r notthere
+
+complete -r
+complete
diff --git a/tests/comsub-eof.right b/tests/comsub-eof.right
new file mode 100644
index 0000000..4267798
--- /dev/null
+++ b/tests/comsub-eof.right
@@ -0,0 +1,15 @@
+./comsub-eof0.sub: line 1: unexpected EOF while looking for matching `)'
+./comsub-eof0.sub: line 5: syntax error: unexpected end of file
+hi
+./comsub-eof2.sub: line 2: warning: here-document at line 1 delimited by end-of-file (wanted `EOF')
+hi
+./comsub-eof3.sub: line 1: unexpected EOF while looking for matching `)'
+./comsub-eof3.sub: line 5: syntax error: unexpected end of file
+./comsub-eof4.sub: line 6: warning: here-document at line 4 delimited by end-of-file (wanted `EOF')
+contents
+./comsub-eof5.sub: line 8: warning: here-document at line 6 delimited by end-of-file (wanted `)')
+hi
+./comsub-eof5.sub: line 13: warning: here-document at line 11 delimited by end-of-file (wanted `EOF')
+hi
+./comsub-eof6.sub: line 1: unexpected EOF while looking for matching `)'
+
diff --git a/tests/comsub-eof.tests b/tests/comsub-eof.tests
new file mode 100644
index 0000000..398746a
--- /dev/null
+++ b/tests/comsub-eof.tests
@@ -0,0 +1,13 @@
+${THIS_SH} ./comsub-eof0.sub
+
+${THIS_SH} ./comsub-eof1.sub
+
+${THIS_SH} ./comsub-eof2.sub
+
+${THIS_SH} ./comsub-eof3.sub
+
+${THIS_SH} ./comsub-eof4.sub
+
+${THIS_SH} ./comsub-eof5.sub
+
+${THIS_SH} ./comsub-eof6.sub
diff --git a/tests/comsub-eof0.sub b/tests/comsub-eof0.sub
new file mode 100644
index 0000000..7b0775f
--- /dev/null
+++ b/tests/comsub-eof0.sub
@@ -0,0 +1,4 @@
+foo=$(cat <<EOF
+hi
+EOF )
+echo $foo
diff --git a/tests/comsub-eof1.sub b/tests/comsub-eof1.sub
new file mode 100644
index 0000000..eaa0e97
--- /dev/null
+++ b/tests/comsub-eof1.sub
@@ -0,0 +1,4 @@
+foo=`cat <<EOF
+hi
+EOF`
+echo $foo
diff --git a/tests/comsub-eof2.sub b/tests/comsub-eof2.sub
new file mode 100644
index 0000000..e93e6c8
--- /dev/null
+++ b/tests/comsub-eof2.sub
@@ -0,0 +1,2 @@
+cat <<EOF
+hi
diff --git a/tests/comsub-eof3.sub b/tests/comsub-eof3.sub
new file mode 100644
index 0000000..f3038c7
--- /dev/null
+++ b/tests/comsub-eof3.sub
@@ -0,0 +1,4 @@
+foo=$(cat <<EOF
+hi
+)
+echo $foo
diff --git a/tests/comsub-eof4.sub b/tests/comsub-eof4.sub
new file mode 100644
index 0000000..870ede9
--- /dev/null
+++ b/tests/comsub-eof4.sub
@@ -0,0 +1,4 @@
+e=$(cat <<EOF
+contents
+EOF)
+echo $e
diff --git a/tests/comsub-eof5.sub b/tests/comsub-eof5.sub
new file mode 100644
index 0000000..3da9107
--- /dev/null
+++ b/tests/comsub-eof5.sub
@@ -0,0 +1,9 @@
+echo $(
+cat <<\)
+hi
+))
+
+echo $(
+cat <<\EOF
+hi
+EOF)
diff --git a/tests/comsub-eof6.sub b/tests/comsub-eof6.sub
new file mode 100644
index 0000000..c0e63dd
--- /dev/null
+++ b/tests/comsub-eof6.sub
@@ -0,0 +1,5 @@
+read foo <<EOF
+$(seq 10
+EOF
+
+echo "$foo"
diff --git a/tests/comsub-posix.right b/tests/comsub-posix.right
new file mode 100644
index 0000000..9aebb84
--- /dev/null
+++ b/tests/comsub-posix.right
@@ -0,0 +1,78 @@
+abmnopyz
+abmnopyz
+ab
+
+
+abcd
+abcd
+sh_352.26ax
+sh_352.26ay
+sh_352.25a sh_352.25b
+sh_352.27 ) ) )
+abc
+here doc with )
+)
+bad' syntax
+a
+sh_352.26a
+sh_352.26a
+sh_352.26
+sh_352.26
+sh_352.26
+1
+sh_352.28 )
+sh_352.28 )
+k
+abcd
+ab
+ab
+abcde
+
+argv[1] = <abcde^J  >
+abcdefoo
+argv[1] = <abcde>
+argv[2] = <foo>
+argv[1] = <wxabcdeyz>
+argv[1] = <abcde>
+'
+after 1
+'
+after 2
+'
+after 3
+`
+after 4
+hello
+after 5
+'
+after 6
+x
+x
+x
+quoted )
+comment
+here-doc with )
+here-doc with \()
+here-doc terminated with a parenthesis
+' # or a single back- or doublequote
+line terminated with a backslash
+./comsub-posix1.sub: command substitution: line 2: syntax error near unexpected token `)'
+./comsub-posix1.sub: command substitution: line 2: ` if x; then echo foo )'
+after
+swap32_posix is a function
+swap32_posix () 
+{ 
+    local funcname=swap32_posix;
+    local arg;
+    for arg in "$@";
+    do
+        echo $((
+                        ($arg & 4278190080) >> 24 |
+                        ($arg & 16711680) >> 8 |
+                        ($arg & 65280) << 8 |
+                        ($arg & 255) << 24
+                ));
+    done
+}
+yes
+ab cde
diff --git a/tests/comsub-posix.tests b/tests/comsub-posix.tests
new file mode 100644
index 0000000..4fe1dfa
--- /dev/null
+++ b/tests/comsub-posix.tests
@@ -0,0 +1,261 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+: ${HOME:=/}
+
+# works right
+echo ab$(echo mnop)yz
+# works right
+echo ab$(echo mnop
+)yz
+#
+# works right
+echo $(echo ab
+   )
+# works right
+echo $(
+)
+echo $()
+echo ab$()cd
+echo ab$(  )cd
+
+echo $(case a in (a) echo sh_352.26ax; esac )
+echo $(case a in (a) echo sh_352.26ay; esac)
+
+echo $((echo sh_352.25a);(echo sh_352.25b))
+
+echo $(echo sh_352.27 ')' ")" \)
+	# ) comment
+	)
+
+echo $(
+echo abc # a comment with )
+)
+
+echo $(
+cat <<eof
+here doc with )
+eof
+)
+
+echo $(
+echo ')'
+)
+
+unset x
+x=$(cat <<"EOF"
+bad' syntax
+EOF
+)
+echo "$x"
+unset x
+
+echo $(for f in \); do echo a; done )
+echo $(case a in a) echo sh_352.26a; esac )
+echo $(case a in a) echo sh_352.26a; esac)
+
+echo $(case a in
+            (a) echo sh_352.26
+               ;;
+                 esac
+          )
+
+echo $(case a in
+            a) echo sh_352.26
+               ;;
+                 esac
+          )
+
+
+echo $(case a in
+            a) echo sh_352.26
+               ;;
+
+
+			
+
+    
+                 esac
+
+          )
+
+echo $(( 4<(2+3) ? 1 : 32))
+
+echo $(cat << end
+sh_352.28 )
+end
+)
+
+echo $(cat <<- end  
+sh_352.28 )
+	end
+)
+
+k=$(case x in x) echo k;; esac)
+echo $k
+
+x=$(
+    case $(ls) in
+	example) echo foobix;;
+    esac
+)
+
+echo $( echo ab\
+cd)
+
+echo `echo ab
+cd`
+
+echo `echo ab #xyz
+cd`
+
+echo "$(echo abcde)
+"
+
+recho "$(echo abcde)
+  "
+
+echo $(echo abcde)\
+foo
+
+recho $(echo abcde)\
+   foo
+
+recho "wx$(echo abcde)yz"
+recho "$(echo abcde)"
+
+echo $(cat <<eof
+'
+eof
+)
+
+echo after 1
+
+echo $(cat <<\eof
+'
+eof
+)
+
+echo after 2
+
+echo "$(cat <<\eof
+'
+eof
+)"
+
+echo after 3
+
+echo "$(cat <<\eof
+`
+eof
+)"
+
+echo after 4
+
+echo $(
+cat << ')'
+hello
+)
+)
+
+echo after 5
+
+echo $(cat <<'eof'
+'
+eof
+)
+
+echo after 6
+
+echo $(
+  case x in  x) echo x;; esac
+)
+
+echo $(
+  case x in  x) echo x;; esac # followed by a comment
+)
+
+echo $(
+  case x in (x) echo x;; esac
+)
+
+echo $(
+  echo 'quoted )'
+)
+
+echo $(
+  echo comment # with )
+)
+
+echo $(
+cat <<\eof
+  here-doc with )
+eof
+)
+
+echo $(
+    cat <<\eof
+    here-doc with \()
+eof
+)
+
+echo $(
+cat <<\)
+	here-doc terminated with a parenthesis
+)
+)
+
+echo $(
+cat <<\eof
+	'   # or a single back- or doublequote
+eof
+)
+
+echo $(
+	echo line terminated with a backslash # \
+)
+
+${THIS_SH} ./comsub-posix1.sub
+
+${THIS_SH} ./comsub-posix2.sub
+
+${THIS_SH} ./comsub-posix3.sub
+
+# produced a parse error through bash-4.0-beta2
+: $(echo foo)"
+"
+# produced a parse error through bash-4.1
+unset x
+x=$(
+echo yes
+# a comment with " ' \
+)
+echo $x
+unset x
+
+# fixed after bash-4.0 released
+: $(case a in a) echo ;; # comment
+esac)
+
+# fixed after bash-4.3 released
+testing=$(
+    echo test | while read line; do
+        case $line in
+             test)  echo saw test ;;
+             *)     echo other ;;
+        esac
+    done
+)
+
+# recommended to be parsed as a nested comsub instead of arithsub
+echo $(( echo ab cde ) )
diff --git a/tests/comsub-posix1.sub b/tests/comsub-posix1.sub
new file mode 100644
index 0000000..bbcc60f
--- /dev/null
+++ b/tests/comsub-posix1.sub
@@ -0,0 +1,3 @@
+echo $( if x; then echo foo )
+
+echo after
diff --git a/tests/comsub-posix2.sub b/tests/comsub-posix2.sub
new file mode 100644
index 0000000..d556fa9
--- /dev/null
+++ b/tests/comsub-posix2.sub
@@ -0,0 +1,29 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# problem with bash-4.x versions before bash-4.2.  required posix interp
+swap32_posix()
+{
+        local funcname=swap32_posix
+        local arg
+        for arg in "$@"; do
+                echo $((
+                        ($arg & 4278190080) >> 24 |
+                        ($arg & 16711680) >> 8 |
+                        ($arg & 65280) << 8 |
+                        ($arg & 255) << 24
+                ))
+        done
+}
+
+type swap32_posix
diff --git a/tests/comsub-posix3.sub b/tests/comsub-posix3.sub
new file mode 100644
index 0000000..39262b2
--- /dev/null
+++ b/tests/comsub-posix3.sub
@@ -0,0 +1,35 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# parsing errors before bash-4.2
+
+a=$(/bin/cat << EOF | wc -l
+a
+b
+c
+EOF
+)
+
+a=$(cat << EOF | wc -l
+a
+b
+c
+EOF
+)
+
+a=$(/bin/cat << EOF
+a
+b
+c
+EOF
+)
diff --git a/tests/comsub.right b/tests/comsub.right
new file mode 100644
index 0000000..a329c83
--- /dev/null
+++ b/tests/comsub.right
@@ -0,0 +1,57 @@
+./comsub.tests: line 20: hijkl: command not found
+argv[1] = <ab>
+argv[2] = <cd>
+argv[1] = <abmn>
+argv[2] = <opyz>
+argv[1] = <b>
+argv[1] = <a\>
+argv[2] = <b>
+argv[1] = <$>
+argv[2] = <bab>
+argv[1] = <`>
+argv[2] = <ab>
+argv[1] = <\>
+argv[2] = <ab>
+argv[1] = <foo \\^Jbar>
+argv[1] = <foo \^Jbar>
+argv[1] = <sed> argv[2] = <-e> argv[3] = <s/[^I:]/\^J/g>
+argv[1] = <sed> argv[2] = <-e> argv[3] = <s/[^I:]//g>
+argv[1] = <foo\^Jbar>
+argv[1] = <foobar>
+argv[1] = <foo\^Jbar>
+#esac
+a
+ok 1
+ok 2
+ok 3
+ok 4
+ok 5
+ok 6
+xyz
+ok 7
+\/tmp\/foo\/bar
+/tmp/foo/bar
+/tmp/foo/bar
+/tmp/foo/bar
+1
+2
+3
+4
+5
+6
+5
+6
+a
+b
+c
+a
+b
+c
+1
+2
+d \
+g
+d \
+g
+d \
+g
diff --git a/tests/comsub.tests b/tests/comsub.tests
new file mode 100644
index 0000000..4786302
--- /dev/null
+++ b/tests/comsub.tests
@@ -0,0 +1,75 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# command substution parsing tests
+
+TABSIZE=`grep -v '^[ #]' $CAPS </dev/null | grep -v "^$" | grep -v "^capalias"| grep -v "^infoalias" | wc -l`
+
+recho `echo ab cd #efg
+hijkl`
+
+recho ab$(echo mn; echo op)yz
+
+a=`echo 'a b c' | sed 's/ /\\
+/g' | grep 'b'`
+recho $a
+
+recho `echo 'a\' b`
+
+recho `echo '\$' bab`
+
+recho `echo '\`' ab`
+
+recho `echo '\\' ab`
+
+# old-style command substitution parsing compatibility tests -- post bash-3.1
+recho 'foo \\
+bar'
+
+recho 'foo \
+bar'
+
+echo `recho sed -e 's/[	:]/\\
+/g'`
+
+echo `recho sed -e 's/[	:]/\
+/g'`
+
+echo `recho 'foo\\
+bar'`
+
+echo `recho 'foo\
+bar'`  
+
+echo $(recho 'foo\
+bar')
+
+# long-standing parse error in all versions up through bash-4.3
+echo ${foo:-$(echo a{b,c})} >/dev/null
+
+# parsing problem based on recursively calling bison parser through bash-4.4
+for (( INDEX=0; INDEX<$((10-$(echo length $V_NAME))); INDEX++ ))
+do
+	:
+done
+
+# problem with four-character words followed by a metachar through bash-4.4
+comsub_foo_1()
+{
+  echo $(while true; do case $HOME in /*) echo abs ;; esac; done)
+}
+
+${THIS_SH} ./comsub1.sub
+${THIS_SH} ./comsub2.sub
+${THIS_SH} ./comsub3.sub
+${THIS_SH} ./comsub4.sub
diff --git a/tests/comsub1.sub b/tests/comsub1.sub
new file mode 100644
index 0000000..ca72243
--- /dev/null
+++ b/tests/comsub1.sub
@@ -0,0 +1,73 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+: $(echo \;)
+
+: $(case a in a) echo ;;# comment
+esac)
+
+: $(case a in a) echo ;; # comment
+esac)
+
+: $(: \;# not a comment )
+
+: $(: \ # not a comment)
+
+echo $(case a in a) echo \#esac ;;
+esac)
+
+: $(case a in a) : ;#esac ;;
+esac)
+
+: $(case a in a) : ;#esac comment )
+esac)
+
+: $(case a in a) : ;
+esac)
+
+echo $(#comment )
+echo a)
+
+echo $(case a in (a) echo ok 1;; # comment
+esac)
+
+echo $(case a in (a) echo ok 2;; # comment
+(b) echo moo;;
+esac)
+
+echo $(case a in (a) echo ok 3 # comment
+;;
+esac)
+
+echo $(case a in a) echo ok 4;; # comment
+esac)
+
+echo $(case a in a) echo ok 5;; # comment
+b) echo moo;;
+esac)
+
+echo $(case a in (a) echo ok 6 # comment
+;;
+esac)
+
+echo $( # we just took and pasted in some
+# code from another script inside a
+# command substitution
+echo xyz
+)
+
+# problem with parse_comsub through bash-4.4
+case $(echo $$'x\nx') in
+x*)	echo bad 7;;
+*)	echo ok 7;;
+esac
diff --git a/tests/comsub2.sub b/tests/comsub2.sub
new file mode 100644
index 0000000..d60ae6a
--- /dev/null
+++ b/tests/comsub2.sub
@@ -0,0 +1,8 @@
+qpath='\/tmp\/foo\/bar'
+
+echo "$qpath"
+
+# it's crazy that all three of these produce the same result
+printf "%s\n" ${qpath//\\/}
+printf "%s\n" ${qpath//"`printf '%s' \\`"/}
+printf "%s\n" ${qpath//`printf '%s' "\\\\\\\\"`/}
diff --git a/tests/comsub3.sub b/tests/comsub3.sub
new file mode 100644
index 0000000..757fbca
--- /dev/null
+++ b/tests/comsub3.sub
@@ -0,0 +1,44 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+x=$(
+  case 1 in
+    1) echo 1
+  esac
+  case 2 in
+    2) echo 2
+  esac
+)
+echo "$x" 
+
+x=$(case 1 in 1) echo 3;; esac; case 2 in 2) echo 4;; esac;)
+echo "$x" 
+
+x=$(case 1 in 1) echo 5;; esac; case 2 in 2) echo 6;; esac)
+echo "$x" 
+
+x=$(case 1 in 1) echo 5;; esac; case 2 in 2) echo 6;; esac; for f in a b c; do echo "$f" ; done)
+echo "$x" 
+
+x=$(
+  for f in a b c; do
+	echo $f
+  done
+  case 1 in
+    1) echo 1
+  esac
+  case 2 in
+    2) echo 2
+  esac
+)
+echo "$x"
diff --git a/tests/comsub4.sub b/tests/comsub4.sub
new file mode 100644
index 0000000..e7a1c55
--- /dev/null
+++ b/tests/comsub4.sub
@@ -0,0 +1,40 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+x=$(cat <<'EOT'
+d \
+g
+EOT
+)
+
+echo "$x"
+unset x
+
+x=$( cat <<\EOT\
+4
+d \
+g
+EOT4
+)
+
+echo "$x"
+unset x
+
+x=$( cat <<\EOT
+d \
+g
+EOT
+)
+
+echo "$x"
+
diff --git a/tests/cond-regexp1.sub b/tests/cond-regexp1.sub
new file mode 100644
index 0000000..1ba9197
--- /dev/null
+++ b/tests/cond-regexp1.sub
@@ -0,0 +1,69 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+VAR='[[:alpha:]]'
+
+[[ $VAR =~ '[[:alpha:]]' ]] && echo match 1
+
+[[ a =~ '[[:alpha:]]' ]] || echo match 2
+
+[[ a =~ [[:alpha:]] ]] && echo match 3
+
+[[ a =~ $VAR ]] && echo match 4
+
+[[ a =~ "$VAR" ]] || echo match 5
+
+line=aab
+[[ $line =~ [[:space:]]*(a)?b ]] && echo match 6
+
+V="alphabet"
+[[ $V == alphabet ]] && echo yes 1
+[[ $V == "alphabet" ]] && echo yes 2
+[[ $V == 'alphabet' ]] && echo yes 3
+[[ $V =~ alphabet ]] && echo yes 4
+[[ $V =~ "alphabet" ]] && echo yes 5
+[[ $V =~ 'alphabet' ]] && echo yes 6
+
+DOG="Dog name - 01 - Wiggles"
+REPAT='([[:alpha:][:blank:]]*)- ([[:digit:]]*) - (.*)$'
+if [[ $DOG =~ ([[:alpha:][:blank:]]*)-\ ([[:digit:]]*)\ -\ (.*)$ ]]
+then
+   echo Dog ${BASH_REMATCH[2]} is ${BASH_REMATCH[3]}
+fi
+if [[ $DOG =~ $REPAT ]]
+then
+   echo Dog ${BASH_REMATCH[2]} is ${BASH_REMATCH[3]}
+fi
+
+[[ $REPAT =~ "$REPAT" ]] && echo rematch 1
+
+v="one two buckle my shoe"
+[[ ${v} =~ "one two" ]] && echo matches 7
+
+[[ ${v} =~ (one two) ]] && echo matches 8
+
+[[ ${v} =~ one\ two ]] && echo matches 9
+
+unset pattern string
+pattern="xxx.yyy"
+string=xxxAyyy
+
+[[ $string =~ $pattern ]] && echo unquoted matches
+[[ $string =~ "$pattern" ]] && echo quoted matches
+
+# problems in pre-patched bash-4.2
+[[ "hello
world" =~ llo
 ]] && echo match control-a 1
+[[ "hello
world" =~ 
world ]] && echo match control-a 2
+[[ "hello
world" =~ 
world$ ]] && echo match control-a 3
+[[ "hello
world" =~ 
 ]] && echo match control-a 4
+[[ "hello
world" =~ o
world$ ]] && echo match control-a 5
diff --git a/tests/cond-regexp2.sub b/tests/cond-regexp2.sub
new file mode 100644
index 0000000..4da0a88
--- /dev/null
+++ b/tests/cond-regexp2.sub
@@ -0,0 +1,45 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+[[ "\\" =~ ["."] ]] && echo bad 1
+
+[[ "\\" =~ "[.]" ]] && echo bad 2
+
+[[ "\\" =~ [\. ]] && echo bad 3
+
+[[ "\\" =~ [\.] ]] && echo bad 4
+
+[[ "\\" =~ [\\] ]] || echo bad 5
+
+[[ dog =~ [[=d=]].. ]] && echo ok 1
+[[ d.. =~ [[=d=]]\.\. ]] && echo ok 2
+[[ dog =~ ['[=d=]'].. ]] && echo ok 3	# dubious
+
+[[ dog =~ [[=d=]].[[=G=][=g=]] ]] && echo ok 4
+[[ dog =~ [[=d=]].[\[=G=][=g=]] ]] && echo ok 4a
+
+[[ dog =~ "d.." ]] || echo ok 5
+
+[[ dog =~ [[.d.][.D.]]o. ]] && echo ok 6
+
+[[ dog =~ ([[.d.][.D.]])o(.) ]] && echo ok 7 -- ${BASH_REMATCH[1]}
+[[ dog =~ d([[.o.][.O.]])(.) ]] && echo ok 8 -- ${BASH_REMATCH[1]}
+[[ dog =~ .([[.o.][.O.]])(.) ]] && echo ok 9
+
+[[ dog =~ 'd''o''g' ]] && echo ok 10
+
+[[ ']' =~ [']'] ]] && echo ok 11
+
+[[ a =~ ['a]'] ]] || echo ok 12
+
+[[ "\\" =~ [^]"."] ]] || echo unexpected
diff --git a/tests/cond-regexp3.sub b/tests/cond-regexp3.sub
new file mode 100644
index 0000000..d939548
--- /dev/null
+++ b/tests/cond-regexp3.sub
@@ -0,0 +1,86 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# simple expansion -- no problem, it's quote_string_for_globbing that was flawed
+c=$'\177'
+r="\\$c"
+
+recho $r
+
+# first, match some regular expressions containing ^A, ^G, ^?
+[[ $'\001' =~ $'\001' ]] ; echo $?
+[[ $'\001' =~ $'\\\001' ]] ; echo $?
+[[ $'\001' =~ $'\\[\001]' ]] ; echo $?
+
+[[ $'\a' =~ $'\a' ]] ; echo $?
+[[ $'\a' =~ $'\\\a' ]]  ; echo $?
+[[ $'\a' =~ $'\\[\a]' ]] ; echo $?
+
+[[ $'\177' =~ $'\177' ]] ; echo $?
+[[ $'\177' =~ $'\\\177' ]] ; echo $?
+[[ $'\177' =~ $'\\[\177]' ]] ; echo $?
+
+# Now let's try it with variables expanding to those values
+for c in $'\001' $'\a' $'\177' ; do
+	for r in "$c" "\\$c" "\\[$c]"; do
+		[[ $c =~ $r ]];
+		printf '[[ %q =~ %q ]] -> %d\n' "$c" "$r" "$?";
+	done;
+	printf %s\\n ---
+done
+
+# try again with literals
+
+[[ '
' =~ $'
' ]] ; echo $?
+[[ '
' =~ '\
' ]] ; echo $?
+[[ '
' =~ '\[
]' ]] ; echo $?
+
+[[ '' =~ '' ]] ; echo $?
+[[ '' =~ '\' ]]  ; echo $?
+[[ '' =~ '\[]' ]] ; echo $?
+
+[[ '' =~ $'' ]] ; echo $?
+[[ '' =~ '\' ]] ; echo $?
+[[ '' =~ '\[]' ]] ; echo $?
+
+# more expansions, but with literal non-special characters
+[[ x =~ \x ]] ; echo $?
+[[ x =~ \\x ]] ; echo $?
+
+bs='\'
+[[ x =~ ${bs}x ]] ; echo $?
+
+[[ x =~ $'\\'x ]] ; echo $?
+[[ x =~ '\'x ]] ; echo $?
+
+v='a\-b'
+[[ a-b =~ ${v} ]] ; echo $?
+[[ a-b =~ a\-b ]]; echo $?
+[[ a-b =~ a${bs}-b ]]; echo $?
+[[ a-b =~ a\\-b ]] ; echo $?
+[[ a-b =~ "a\-b" ]] ; echo $?
+
+c=$'\001'
+
+recho $c "$c"
+
+[[ $c == $c ]] && echo ok 1
+[[ $c =~ $c ]] && echo ok 2
+[[ $c =~ \\$c ]] || echo ok 3
+[[ $c =~ \\"$c" ]] || echo ok 4
+
+[[ $c =~ "\\"$c ]] || echo ok 5
+[[ $c =~ '\'$c ]] || echo ok 6
+
+[[ $c =~ "\\""$c" ]] || echo ok 7
+[[ $c =~ '\'"$c" ]] || echo ok 8
diff --git a/tests/cond.right b/tests/cond.right
new file mode 100644
index 0000000..59a4a88
--- /dev/null
+++ b/tests/cond.right
@@ -0,0 +1,136 @@
+returns: 0
+returns: 0
+returns: 1
+returns: 0
+returns: 0
+returns: 0
+returns: 0
+returns: 0
+returns: 1
+returns: 0
+returns: 0
+returns: 1
+returns: 1
+returns: 1
+returns: 1
+returns: 0
+returns: 0
+returns: 0
+returns: 1
+returns: 0
+returns: 1
+returns: 0
+returns: 1
+returns: 1
+returns: 0
+./cond.tests: line 114: [[: 4+: syntax error: operand expected (error token is "+")
+returns: 1
+returns: 0
+returns: 0
+returns: 1
+returns: 0
+returns: 0
+returns: 1
+returns: 0
+ok
+jbig2dec
+
+found 1
+libc
+found 2
+libc
+ok 42
+ok 43
+ok 1
+ok 2
+ok 3
+ok 4
+ok 5
+match 1
+match 2
+match 3
+match 4
+match 5
+match 6
+yes 1
+yes 2
+yes 3
+yes 4
+yes 5
+yes 6
+Dog 01 is Wiggles
+Dog 01 is Wiggles
+rematch 1
+matches 7
+matches 8
+matches 9
+unquoted matches
+match control-a 1
+match control-a 2
+match control-a 3
+match control-a 4
+match control-a 5
+ok 1
+ok 2
+ok 3
+ok 4
+ok 4a
+ok 5
+ok 6
+ok 7 -- d
+ok 8 -- o
+ok 9
+ok 10
+ok 11
+ok 12
+argv[1] = <\^?>
+0
+1
+1
+0
+1
+1
+0
+1
+1
+[[ $'\001' =~ $'\001' ]] -> 0
+[[ $'\001' =~ $'\\\001' ]] -> 0
+[[ $'\001' =~ $'\\[\001]' ]] -> 1
+---
+[[ $'\a' =~ $'\a' ]] -> 0
+[[ $'\a' =~ $'\\\a' ]] -> 0
+[[ $'\a' =~ $'\\[\a]' ]] -> 1
+---
+[[ $'\177' =~ $'\177' ]] -> 0
+[[ $'\177' =~ $'\\\177' ]] -> 0
+[[ $'\177' =~ $'\\[\177]' ]] -> 1
+---
+0
+1
+1
+0
+1
+1
+0
+1
+1
+0
+1
+0
+1
+1
+0
+0
+0
+1
+1
+argv[1] = <^A>
+argv[2] = <^A>
+ok 1
+ok 2
+ok 3
+ok 4
+ok 5
+ok 6
+ok 7
+ok 8
diff --git a/tests/cond.tests b/tests/cond.tests
new file mode 100644
index 0000000..aa6a810
--- /dev/null
+++ b/tests/cond.tests
@@ -0,0 +1,214 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+#
+# the test/[ code is tested elsewhere, and the [[...]] just uses the same
+# code.  this tests the special features of [[...]]
+#
+TDIR=/usr/homes/chet
+
+# this one is straight out of the ksh88 book
+[[ foo > bar && $PWD -ef . ]]
+echo returns: $?
+
+# [[ x ]] is equivalent to [[ -n x ]]
+[[ x ]]
+echo returns: $?
+
+# [[ ! x ]] is equivalent to [[ ! -n x ]]
+[[ ! x ]]
+echo returns: $?
+
+# ! binds tighter than test/[ -- it binds to a term, not an expression
+[[ ! x || x ]]
+echo returns: $?
+
+# parenthesized terms didn't work right until post-2.04
+[[ a ]]
+echo returns: $?
+
+[[ (a) ]]
+echo returns: $?
+
+[[ -n a ]]
+echo returns: $?
+
+[[ (-n a) ]]
+echo returns: $?
+
+# unset variables don't need to be quoted
+[[ -n $UNSET ]]
+echo returns: $?
+
+[[ -z $UNSET ]]
+echo returns: $?
+
+# the ==/= and != operators do pattern matching
+[[ $TDIR == /usr/homes/* ]]
+echo returns: $?
+
+# ...but you can quote any part of the pattern to have it matched as a string
+[[ $TDIR == /usr/homes/\* ]]
+echo returns: $?
+
+[[ $TDIR == '/usr/homes/*' ]]
+echo returns: $?
+
+# if the first part of && fails, the second is not executed
+[[ -n $UNSET && $UNSET == foo ]]
+echo returns: $?
+
+[[ -z $UNSET && $UNSET == foo ]]
+echo returns: $?
+
+# if the first part of || succeeds, the second is not executed
+[[ -z $UNSET || -d $PWD ]]
+echo returns: $?
+
+# if the rhs were executed, it would be an error
+[[ -n $TDIR || $HOME -ef ${H*} ]]
+echo returns: $?
+
+[[ -n $TDIR && -z $UNSET || $HOME -ef ${H*} ]]
+echo returns: $?
+
+# && has a higher parsing precedence than ||
+[[ -n $TDIR && -n $UNSET || $TDIR -ef . ]]
+echo returns: $?
+
+# ...but expressions in parentheses may be used to override precedence rules
+[[ -n $TDIR || -n $UNSET && $PWD -ef xyz ]]
+echo returns: $?
+
+[[ ( -n $TDIR || -n $UNSET ) && $PWD -ef xyz ]]
+echo returns: $?
+
+# some arithmetic tests for completeness -- see what happens with missing
+# operands, bad expressions, makes sure arguments are evaluated as
+# arithmetic expressions, etc.
+
+unset IVAR A
+[[ 7 -gt $IVAR ]]
+echo returns: $?
+
+[[ $IVAR -gt 7 ]]
+echo returns: $?
+
+IVAR=4
+[[ $IVAR -gt 7 ]]
+echo returns: $?
+
+[[ 7 -eq 4+3 ]]
+echo returns: $?
+
+[[ 7 -eq 4+ ]] 
+echo returns: $? 
+
+IVAR=4+3
+[[ $IVAR -eq 7 ]]
+echo returns: $?
+
+A=7
+[[ $IVAR -eq A ]]
+echo returns: $?
+
+unset IVAR A
+
+# more pattern matching tests
+
+[[ $filename == *.c ]]
+echo returns: $?
+
+filename=patmatch.c
+
+[[ $filename == *.c ]]
+echo returns: $?
+
+# the extended globbing features may be used when matching patterns
+shopt -s extglob
+
+arg=-7
+
+[[ $arg == -+([0-9]) ]]
+echo returns: $?
+
+arg=-H
+
+[[ $arg == -+([0-9]) ]]
+echo returns: $?
+
+arg=+4
+[[ $arg == ++([0-9]) ]]
+echo returns: $?
+
+# make sure the null string is never matched if the string is not null
+STR=file.c
+PAT=
+
+if [[ $STR = $PAT ]]; then
+        echo oops
+fi
+
+# but that if the string is null, a null pattern is matched correctly
+STR=
+PAT=
+
+if [[ $STR = $PAT ]]; then
+        echo ok
+fi
+
+# test the regular expression conditional operator
+[[ jbig2dec-0.9-i586-001.tgz =~ ([^-]+)-([^-]+)-([^-]+)-0*([1-9][0-9]*)\.tgz ]]
+echo ${BASH_REMATCH[1]}
+
+# this shouldn't echo anything
+[[ jbig2dec-0.9-i586-001.tgz =~ \([^-]+\)-\([^-]+\)-\([^-]+\)-0*\([1-9][0-9]*\)\.tgz ]]
+echo ${BASH_REMATCH[1]}
+
+LDD_BASH="       linux-gate.so.1 =>  (0xffffe000)
+       libreadline.so.5 => /lib/libreadline.so.5 (0xb7f91000)
+       libhistory.so.5 => /lib/libhistory.so.5 (0xb7f8a000)
+       libncurses.so.5 => /lib/libncurses.so.5 (0xb7f55000)
+       libdl.so.2 => /lib/libdl.so.2 (0xb7f51000)
+       libc.so.6 => /lib/libc.so.6 (0xb7e34000)
+       /lib/ld-linux.so.2 (0xb7fd0000)"
+
+[[ "$LDD_BASH" =~ "libc" ]] && echo "found 1" 
+echo ${BASH_REMATCH[@]}
+
+[[ "$LDD_BASH" =~ libc ]] && echo "found 2" 
+echo ${BASH_REMATCH[@]}
+
+# bug in all versions up to and including bash-2.05b
+if [[ "123abc" == *?(a)bc ]]; then echo ok 42; else echo bad 42; fi
+if [[ "123abc" == *?(a)bc ]]; then echo ok 43; else echo bad 43; fi
+
+match() { [[ $1 == $2 ]]; }
+match $'? *x\1y\177z' $'??\\*\\x\\\1\\y\\\177\\z' || echo bad 44
+
+foo=""
+[[ bar == *"${foo,,}"* ]] && echo ok 1
+[[ bar == *${foo,,}* ]] && echo ok 2
+
+shopt -s extquote
+bs='\'
+del=$'\177'
+[[ bar == *$bs"$del"* ]] || echo ok 3
+[[ "" == "$foo" ]] && echo ok 4
+[[ "$del" == "${foo,,}" ]] || echo ok 5
+
+${THIS_SH} ./cond-regexp1.sub
+
+${THIS_SH} ./cond-regexp2.sub
+
+${THIS_SH} ./cond-regexp3.sub
diff --git a/tests/coproc.right b/tests/coproc.right
new file mode 100644
index 0000000..94b001c
--- /dev/null
+++ b/tests/coproc.right
@@ -0,0 +1,10 @@
+63 60
+a b c
+63 60
+flop
+coproc.tests: REFLECT: status 143
+63 60
+FOO
+63 60
+root
+-1 -1
diff --git a/tests/coproc.tests b/tests/coproc.tests
new file mode 100644
index 0000000..a735932
--- /dev/null
+++ b/tests/coproc.tests
@@ -0,0 +1,78 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+: ${TMPDIR:=/tmp}
+TMPOUT=${TMPDIR}/coproc-wait-$BASHPID
+
+coproc { echo a b c; sleep 2; }
+
+case $COPROC_PID in
+[0-9]*)	;;
+*)	echo COPROC_PID not integer ;;
+esac
+
+echo ${COPROC[@]}
+
+read LINE <&${COPROC[0]}
+echo $LINE
+
+wait $COPROC_PID
+
+coproc REFLECT { cat - ; }
+
+case $REFLECT_PID in
+[0-9]*)	;;
+*)	echo REFLECT_PID not integer ;;
+esac
+
+echo ${REFLECT[@]}
+
+echo flop >&${REFLECT[1]}
+read LINE <&${REFLECT[0]}
+
+echo $LINE
+
+{ sleep 1; kill $REFLECT_PID; } &
+wait $REFLECT_PID >$TMPOUT 2>&1 || { status=$? ; echo "coproc.tests: REFLECT: status $status" ; }
+[[ $status < 128 || $status == 143 ]] || {
+	echo "coproc.tests: wait for REFLECT failed" >&2
+}
+rm -f $TMPOUT
+exec 2>&1
+
+coproc xcase -n -u
+
+case $COPROC_PID in
+[0-9]*)	;;
+*)	echo COPROC_PID not integer ;;
+esac
+
+echo ${COPROC[@]}
+
+echo foo >&${COPROC[1]}
+read <&${COPROC[0]}
+
+echo $REPLY
+echo ${COPROC[@]}
+
+cat /etc/passwd | grep root | awk -F: '{print $1;}' | sed 1q
+
+exec 4<&${COPROC[0]}-
+exec >&${COPROC[1]}-
+
+echo ${COPROC[@]}
+
+read foo <&4
+echo $foo >&2
+
+exit 0
diff --git a/tests/cprint.right b/tests/cprint.right
new file mode 100644
index 0000000..2000072
--- /dev/null
+++ b/tests/cprint.right
@@ -0,0 +1,72 @@
+tf is a function
+tf () 
+{ 
+    echo this is ${0##*/} > /dev/null;
+    echo a | cat - > /dev/null;
+    test -f ${0##*/} && echo ${0##*/} is a regular file;
+    test -d ${0##*/} || echo ${0##*/} is not a directory;
+    echo a;
+    echo b;
+    echo c;
+    echo background > /dev/null & ( exit 1 );
+    echo $?;
+    { 
+        echo a
+    };
+    i=0;
+    while (( i < 3 )); do
+        test -r /dev/fd/$i;
+        i=$(( i + 1 ));
+    done;
+    [[ -r /dev/fd/0 && -w /dev/fd/1 ]] || echo oops > /dev/null;
+    for name in $( echo 1 2 3 );
+    do
+        test -r /dev/fd/$name;
+    done;
+    if [[ -r /dev/fd/0 && -w /dev/fd/1 ]]; then
+        echo ok > /dev/null;
+    else
+        if (( 7 > 40 )); then
+            echo oops;
+        else
+            echo done;
+        fi;
+    fi > /dev/null;
+    case $PATH in 
+        *$PWD*)
+            echo \$PWD in \$PATH
+        ;;
+        *)
+            echo \$PWD not in \$PATH
+        ;;
+    esac > /dev/null;
+    while false; do
+        echo z;
+    done > /dev/null;
+    until true; do
+        echo z;
+    done > /dev/null;
+    echo \&\|'()' \{ echo abcde \; \};
+    eval fu\%nc'()' \{ echo abcde \; \};
+    type fu\%nc
+}
+tf2 is a function
+tf2 () 
+{ 
+    ( { 
+        time -p echo a | cat - > /dev/null
+    } ) 2>&1
+}
+cprint.tests is a regular file
+cprint.tests is not a directory
+a
+b
+c
+1
+a
+&|() { echo abcde ; }
+fu%nc is a function
+fu%nc () 
+{ 
+    echo abcde
+}
diff --git a/tests/cprint.tests b/tests/cprint.tests
new file mode 100644
index 0000000..e598f8c
--- /dev/null
+++ b/tests/cprint.tests
@@ -0,0 +1,80 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+#
+# a nonsense script and shell function to test out the command printing code
+#
+tf()
+{
+	# simple command with redir
+	echo this is ${0##*/} > /dev/null
+
+	# pipeline
+	echo a | cat - > /dev/null
+
+	test -f ${0##*/} && echo ${0##*/} is a regular file
+	test -d ${0##*/} || echo ${0##*/} is not a directory
+
+	echo a ; echo b ; echo c
+
+	echo background >/dev/null &
+
+	( exit 1 )
+	echo $?
+
+	{ echo a ; }
+
+	i=0
+	while (( i < 3 )); do
+		test -r /dev/fd/$i
+		i=$(( i + 1 ))
+	done
+
+	[[ -r /dev/fd/0 && -w /dev/fd/1 ]] || echo oops > /dev/null
+
+	for name in $( echo 1 2 3 ); do
+		test -r /dev/fd/$name
+	done
+
+	if [[ -r /dev/fd/0 && -w /dev/fd/1 ]] ; then
+		echo ok > /dev/null
+	elif (( 7 > 40 )) ; then
+		echo oops
+	else
+		echo done
+	fi > /dev/null
+
+	case $PATH in
+	*$PWD*)	echo \$PWD in \$PATH ;;
+	*)	echo \$PWD not in \$PATH ;;
+	esac > /dev/null
+
+	while false; do echo z; done > /dev/null
+
+	until true; do echo z ; done > /dev/null
+
+	echo \&\|'()' \{ echo abcde \; \}
+	# when not in POSIX mode, we can have weirdly-named functions
+	eval fu\%nc'()' \{ echo abcde \; \}
+	type fu\%nc
+}
+
+tf2()
+{
+	( { time -p echo a | cat - > /dev/null ; } ) 2>&1
+}
+
+type tf
+type tf2
+
+tf
diff --git a/tests/dbg-support.right b/tests/dbg-support.right
new file mode 100644
index 0000000..6e2194a
--- /dev/null
+++ b/tests/dbg-support.right
@@ -0,0 +1,371 @@
+debug lineno: 74 main
+debug lineno: 77 main
+FUNCNAME main
+debug lineno: 81 main
+debug lineno: 30 fn1
+debug lineno: 31 fn1
+LINENO 31
+debug lineno: 32 fn1
+LINENO 32
+debug lineno: 33 fn1
+BASH_SOURCE[0] ./dbg-support.tests
+debug lineno: 34 fn1
+FUNCNAME[0] fn1
+debug lineno: 35 fn1
+debug lineno: 35 fn1 81 ./dbg-support.tests
+debug lineno: 36 fn1
+debug lineno: 36 fn1 81 main ./dbg-support.tests
+debug lineno: 37 fn1
+debug lineno: 37 fn1
+debug lineno: 38 fn1
+./dbg-support.tests: line 38: caller: foo: invalid number
+caller: usage: caller [expr]
+debug lineno: 38 fn1
+debug lineno: 30 fn1
+debug lineno: 25 print_return_trap
+debug lineno: 26 print_return_trap
+return lineno: 30 fn1
+debug lineno: 27 print_return_trap
+debug lineno: 82 main
+debug lineno: 41 fn2
+debug lineno: 42 fn2
+fn2 here. Calling fn1...
+debug lineno: 43 fn2
+debug lineno: 30 fn1
+debug lineno: 31 fn1
+LINENO 31
+debug lineno: 32 fn1
+LINENO 32
+debug lineno: 33 fn1
+BASH_SOURCE[0] ./dbg-support.tests
+debug lineno: 34 fn1
+FUNCNAME[0] fn1
+debug lineno: 35 fn1
+debug lineno: 35 fn1 43 ./dbg-support.tests
+debug lineno: 36 fn1
+debug lineno: 36 fn1 43 fn2 ./dbg-support.tests
+debug lineno: 37 fn1
+debug lineno: 37 fn1 82 main ./dbg-support.tests
+debug lineno: 38 fn1
+./dbg-support.tests: line 38: caller: foo: invalid number
+caller: usage: caller [expr]
+debug lineno: 38 fn1
+debug lineno: 30 fn1
+debug lineno: 25 print_return_trap
+debug lineno: 26 print_return_trap
+return lineno: 30 fn1
+debug lineno: 27 print_return_trap
+debug lineno: 41 fn2
+debug lineno: 25 print_return_trap
+debug lineno: 26 print_return_trap
+return lineno: 41 fn2
+debug lineno: 27 print_return_trap
+debug lineno: 83 main
+debug lineno: 46 fn3
+debug lineno: 47 fn3
+LINENO 47
+debug lineno: 48 fn3
+BASH_SOURCE[0] ./dbg-support.tests
+debug lineno: 51 fn3
+debug lineno: 52 fn3
+debug lineno: 53 fn3
+debug lineno: 53 fn3
+debug lineno: 54 fn3
+debug lineno: 55 fn3
+debug lineno: 56 fn3
+fn3 called from file  `./dbg-support.tests' at line 0
+debug lineno: 53 fn3
+debug lineno: 53 fn3
+debug lineno: 54 fn3
+debug lineno: 55 fn3
+debug lineno: 55 fn3
+debug lineno: 56 fn3
+main called from file  `./dbg-support.tests' at line 0
+debug lineno: 53 fn3
+debug lineno: 53 fn3
+debug lineno: 59 fn3
+debug lineno: 31 source
+SOURCED LINENO 31
+debug lineno: 32 source
+SOURCED BASH_SOURCE[0] ./dbg-support.sub
+debug lineno: 33 source
+debug lineno: 16 sourced_fn
+debug lineno: 17 sourced_fn
+debug lineno: 18 sourced_fn
+SOURCED FN LINENO 18
+debug lineno: 21 sourced_fn
+debug lineno: 22 sourced_fn
+debug lineno: 23 sourced_fn
+debug lineno: 23 sourced_fn
+debug lineno: 24 sourced_fn
+debug lineno: 25 sourced_fn
+debug lineno: 26 sourced_fn
+FUNCNAME[0]: sourced_fn called from ./dbg-support.sub at line 33
+debug lineno: 23 sourced_fn
+debug lineno: 23 sourced_fn
+debug lineno: 24 sourced_fn
+debug lineno: 25 sourced_fn
+debug lineno: 26 sourced_fn
+FUNCNAME[1]: source called from ./dbg-support.tests at line 59
+debug lineno: 23 sourced_fn
+debug lineno: 23 sourced_fn
+debug lineno: 24 sourced_fn
+debug lineno: 25 sourced_fn
+debug lineno: 26 sourced_fn
+FUNCNAME[2]: fn3 called from ./dbg-support.tests at line 83
+debug lineno: 23 sourced_fn
+debug lineno: 23 sourced_fn
+debug lineno: 24 sourced_fn
+debug lineno: 25 sourced_fn
+debug lineno: 25 sourced_fn
+debug lineno: 26 sourced_fn
+FUNCNAME[3]: main called from ./dbg-support.tests at line 0
+debug lineno: 23 sourced_fn
+debug lineno: 23 sourced_fn
+debug lineno: 16 sourced_fn
+debug lineno: 25 print_return_trap
+debug lineno: 26 print_return_trap
+return lineno: 16 sourced_fn
+debug lineno: 27 print_return_trap
+debug lineno: 59 fn3
+debug lineno: 25 print_return_trap
+debug lineno: 26 print_return_trap
+return lineno: 59 fn3
+debug lineno: 27 print_return_trap
+debug lineno: 46 fn3
+debug lineno: 25 print_return_trap
+debug lineno: 26 print_return_trap
+return lineno: 46 fn3
+debug lineno: 27 print_return_trap
+debug lineno: 84 main
+debug lineno: 31 source
+SOURCED LINENO 31
+debug lineno: 32 source
+SOURCED BASH_SOURCE[0] ./dbg-support.sub
+debug lineno: 33 source
+debug lineno: 16 sourced_fn
+debug lineno: 17 sourced_fn
+debug lineno: 18 sourced_fn
+SOURCED FN LINENO 18
+debug lineno: 21 sourced_fn
+debug lineno: 22 sourced_fn
+debug lineno: 23 sourced_fn
+debug lineno: 23 sourced_fn
+debug lineno: 24 sourced_fn
+debug lineno: 25 sourced_fn
+debug lineno: 26 sourced_fn
+FUNCNAME[0]: sourced_fn called from ./dbg-support.sub at line 33
+debug lineno: 23 sourced_fn
+debug lineno: 23 sourced_fn
+debug lineno: 24 sourced_fn
+debug lineno: 25 sourced_fn
+debug lineno: 26 sourced_fn
+FUNCNAME[1]: source called from ./dbg-support.tests at line 84
+debug lineno: 23 sourced_fn
+debug lineno: 23 sourced_fn
+debug lineno: 24 sourced_fn
+debug lineno: 25 sourced_fn
+debug lineno: 25 sourced_fn
+debug lineno: 26 sourced_fn
+FUNCNAME[2]: main called from ./dbg-support.tests at line 0
+debug lineno: 23 sourced_fn
+debug lineno: 23 sourced_fn
+debug lineno: 16 sourced_fn
+debug lineno: 25 print_return_trap
+debug lineno: 26 print_return_trap
+return lineno: 16 sourced_fn
+debug lineno: 27 print_return_trap
+debug lineno: 84 main
+debug lineno: 25 print_return_trap
+debug lineno: 26 print_return_trap
+return lineno: 84 main
+debug lineno: 27 print_return_trap
+debug lineno: 87 main
+debug lineno: 90 main
+LINENO 31
+LINENO 32
+BASH_SOURCE[0] ./dbg-support.tests
+FUNCNAME[0] fn1
+90 ./dbg-support.tests
+90 main ./dbg-support.tests
+
+./dbg-support.tests: line 38: caller: foo: invalid number
+caller: usage: caller [expr]
+
+debug lineno: 91 main
+fn2 here. Calling fn1...
+LINENO 31
+LINENO 32
+BASH_SOURCE[0] ./dbg-support.tests
+FUNCNAME[0] fn1
+43 ./dbg-support.tests
+43 fn2 ./dbg-support.tests
+91 main ./dbg-support.tests
+./dbg-support.tests: line 38: caller: foo: invalid number
+caller: usage: caller [expr]
+
+debug lineno: 92 main
+LINENO 47
+BASH_SOURCE[0] ./dbg-support.tests
+fn3 called from file  `./dbg-support.tests' at line 0
+main called from file  `./dbg-support.tests' at line 0
+SOURCED LINENO 31
+SOURCED BASH_SOURCE[0] ./dbg-support.sub
+SOURCED FN LINENO 18
+FUNCNAME[0]: sourced_fn called from ./dbg-support.sub at line 33
+FUNCNAME[1]: source called from ./dbg-support.tests at line 59
+FUNCNAME[2]: fn3 called from ./dbg-support.tests at line 92
+FUNCNAME[3]: main called from ./dbg-support.tests at line 0
+debug lineno: 93 main
+fn4 here. Calling fn3...
+LINENO 47
+BASH_SOURCE[0] ./dbg-support.tests
+fn3 called from file  `./dbg-support.tests' at line 93
+fn4 called from file  `./dbg-support.tests' at line 0
+main called from file  `./dbg-support.tests' at line 0
+SOURCED LINENO 31
+SOURCED BASH_SOURCE[0] ./dbg-support.sub
+SOURCED FN LINENO 18
+FUNCNAME[0]: sourced_fn called from ./dbg-support.sub at line 33
+FUNCNAME[1]: source called from ./dbg-support.tests at line 59
+FUNCNAME[2]: fn3 called from ./dbg-support.tests at line 64
+FUNCNAME[3]: fn4 called from ./dbg-support.tests at line 93
+FUNCNAME[4]: main called from ./dbg-support.tests at line 0
+debug lineno: 94 main
+SOURCED LINENO 31
+SOURCED BASH_SOURCE[0] ./dbg-support.sub
+SOURCED FN LINENO 18
+FUNCNAME[0]: sourced_fn called from ./dbg-support.sub at line 33
+FUNCNAME[1]: source called from ./dbg-support.tests at line 94
+FUNCNAME[2]: main called from ./dbg-support.tests at line 0
+return lineno: 94 main
+debug lineno: 97 main
+debug lineno: 100 main
+debug lineno: 31 source
+SOURCED LINENO 31
+debug lineno: 32 source
+SOURCED BASH_SOURCE[0] ./dbg-support.sub
+debug lineno: 33 source
+debug lineno: 16 sourced_fn
+debug lineno: 17 sourced_fn
+debug lineno: 18 sourced_fn
+SOURCED FN LINENO 18
+debug lineno: 21 sourced_fn
+debug lineno: 22 sourced_fn
+debug lineno: 23 sourced_fn
+debug lineno: 23 sourced_fn
+debug lineno: 24 sourced_fn
+debug lineno: 25 sourced_fn
+debug lineno: 26 sourced_fn
+FUNCNAME[0]: sourced_fn called from ./dbg-support.sub at line 33
+debug lineno: 23 sourced_fn
+debug lineno: 23 sourced_fn
+debug lineno: 24 sourced_fn
+debug lineno: 25 sourced_fn
+debug lineno: 26 sourced_fn
+FUNCNAME[1]: source called from ./dbg-support.tests at line 100
+debug lineno: 23 sourced_fn
+debug lineno: 23 sourced_fn
+debug lineno: 24 sourced_fn
+debug lineno: 25 sourced_fn
+debug lineno: 25 sourced_fn
+debug lineno: 26 sourced_fn
+FUNCNAME[2]: main called from ./dbg-support.tests at line 0
+debug lineno: 23 sourced_fn
+debug lineno: 23 sourced_fn
+debug lineno: 16 sourced_fn
+debug lineno: 25 print_return_trap
+debug lineno: 26 print_return_trap
+return lineno: 16 sourced_fn
+debug lineno: 27 print_return_trap
+debug lineno: 100 main
+debug lineno: 25 print_return_trap
+debug lineno: 26 print_return_trap
+return lineno: 100 main
+debug lineno: 27 print_return_trap
+debug lineno: 101 main
+debug lineno: 104 main
+debug lineno: 104 main
+debug lineno: 105 main
+debug lineno: 108 main
+debug lineno: 104 main
+debug lineno: 104 main
+debug lineno: 105 main
+debug lineno: 108 main
+debug lineno: 104 main
+debug lineno: 104 main
+debug lineno: 105 main
+debug lineno: 106 main
+Hit 2
+debug lineno: 108 main
+debug lineno: 104 main
+debug lineno: 104 main
+debug lineno: 114 main
+SOURCED FN LINENO 18 FUNCNAME[0]: sourced_fn called from ./dbg-support.tests at line 114 FUNCNAME[1]: main called from ./dbg-support.tests at line 0
+debug lineno: 115 main
+SOURCED FN LINENO 18 FUNCNAME[0]: sourced_fn called from ./dbg-support.tests at line 115 FUNCNAME[1]: main called from ./dbg-support.tests at line 0
+debug lineno: 116 main
+debug lineno: 117 main
+SOURCED FN LINENO 18
+FUNCNAME[0]: sourced_fn called from ./dbg-support.tests at line 117
+FUNCNAME[1]: main called from ./dbg-support.tests at line 0
+debug lineno: 121 main
+debug lineno: 122 main
+debug lineno: 16 sourced_fn
+debug lineno: 17 sourced_fn
+debug lineno: 18 sourced_fn
+SOURCED FN LINENO 18
+debug lineno: 21 sourced_fn
+debug lineno: 22 sourced_fn
+debug lineno: 23 sourced_fn
+debug lineno: 23 sourced_fn
+debug lineno: 24 sourced_fn
+debug lineno: 25 sourced_fn
+debug lineno: 26 sourced_fn
+FUNCNAME[0]: sourced_fn called from ./dbg-support.tests at line 122
+debug lineno: 23 sourced_fn
+debug lineno: 23 sourced_fn
+debug lineno: 24 sourced_fn
+debug lineno: 25 sourced_fn
+debug lineno: 25 sourced_fn
+debug lineno: 26 sourced_fn
+FUNCNAME[1]: main called from ./dbg-support.tests at line 0
+debug lineno: 23 sourced_fn
+debug lineno: 23 sourced_fn
+debug lineno: 16 sourced_fn
+debug lineno: 25 print_return_trap
+debug lineno: 26 print_return_trap
+return lineno: 16 sourced_fn
+debug lineno: 27 print_return_trap
+debug lineno: 125 main
+debug lineno: 130 main
+debug lineno: 134 main
+got it
+debug lineno: 142 main
+debug lineno: 143 main
+debug lineno: 144 main
+debug lineno: 143 main
+debug lineno: 144 main
+debug lineno: 142 main
+debug lineno: 143 main
+debug lineno: 144 main
+debug lineno: 143 main
+debug lineno: 144 main
+debug lineno: 148 main
+main: calling f1
+f1: calling f2
+f2: calling f3
+f3: calling callstack
+deep 6
+0 z
+1 3
+2 y
+3 2
+4 x
+5 1
+FUNCNAME stack: f3 f2 f1 main
+39 f2 ./dbg-support3.sub
+f3: returning
+f2: return from f3
+f1: return from f2
+main: f1 returns
diff --git a/tests/dbg-support.sub b/tests/dbg-support.sub
new file mode 100644
index 0000000..8c82c80
--- /dev/null
+++ b/tests/dbg-support.sub
@@ -0,0 +1,39 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# This file is intended to be sourced from one of the bashdb test programs
+
+sourced_fn() {
+    name="fn2"
+    echo "SOURCED FN LINENO $LINENO"
+
+    # Print a stack trace
+    declare -i n
+    n=${#FUNCNAME[@]}
+    for (( i=0 ; (( i < $n )) ; i++ )) ; do 
+        local -i j=i+1
+	[ $j -eq $n ] && j=i  # main()'s file is the same as the first caller
+	echo "FUNCNAME[$i]: ${FUNCNAME[$i]} called from ${BASH_SOURCE[$j]}" \
+	     "at line ${BASH_LINENO[$i]}"
+    done
+}
+
+echo "SOURCED LINENO $LINENO"
+echo "SOURCED BASH_SOURCE[0]" ${BASH_SOURCE[0]}
+sourced_fn
+
+#;;; Local Variables: ***
+#;;; mode:shell-script ***
+#;;; eval: (sh-set-shell "bash") ***
+#;;; End: ***
+
diff --git a/tests/dbg-support.tests b/tests/dbg-support.tests
new file mode 100644
index 0000000..b4a58e4
--- /dev/null
+++ b/tests/dbg-support.tests
@@ -0,0 +1,148 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+#
+# Test correct functioning bash debug support not via the bashdb
+# debugger but merely by printing via print_trap()
+# $Id: dbg-support.tests,v 1.13 2003/02/17 22:02:25 rockyb Exp $
+shopt -s extdebug
+print_debug_trap() {
+   echo "debug lineno: $1 ${FUNCNAME[1]}"
+   return
+}
+
+print_return_trap() {
+   echo "return lineno: $1 ${FUNCNAME[1]}"
+   return
+}
+
+fn1() {
+    echo "LINENO $LINENO"
+    echo "LINENO $LINENO"
+    echo "BASH_SOURCE[0]" ${BASH_SOURCE[0]}
+    echo "FUNCNAME[0]" ${FUNCNAME[0]}
+    echo `caller`
+    echo `caller 0`
+    echo `caller 1`
+    echo `caller foo`
+}    
+
+fn2() {
+    echo "fn2 here. Calling fn1..."
+    fn1
+}    
+
+fn3() {
+    echo "LINENO $LINENO"
+    echo "BASH_SOURCE[0]" ${BASH_SOURCE[0]}
+    
+    # Print a stack trace
+    declare -i n
+    n=${#FUNCNAME[@]}
+    for (( i=0 ; (( i < $n )) ; i++ )) ; do 
+        local -i j=i+1
+	[ $j -eq $n ] && j=i  # main()'s file is the same as the first caller
+	echo "${FUNCNAME[$i]} called from file " \
+	    "\`${BASH_SOURCE[$j]}' at line ${BASH_LINENO[$j]}"
+    done
+    source ./dbg-support.sub
+}    
+
+fn4() {
+    echo "fn4 here. Calling fn3..."
+    fn3
+}    
+
+#
+# Test of support for debugging facilities in bash
+# 
+# Test debugger set option functrace - set on. Not in vanilla Bash 2.05
+#
+set -o functrace
+trap 'print_debug_trap $LINENO' DEBUG
+trap 'print_return_trap $LINENO' RETURN
+
+# Funcname is now an array, but you still can't see it outside a function
+echo "FUNCNAME" ${FUNCNAME[0]:-main}
+
+# We should trace into the below. 
+# Start easy with a simple function.
+fn1
+fn2
+fn3
+source ./dbg-support.sub
+
+# Test debugger set option functrace - set off
+set +T
+
+# We should not trace into this.
+fn1
+fn2
+fn3
+fn4
+source ./dbg-support.sub
+
+# Another way to say: set -o functrace
+set -T
+
+# We should trace into this.
+source ./dbg-support.sub
+set +T
+
+# Test that the line numbers in the presence of conditionals are correct.
+for (( i=0 ; (( i <= 2 )) ; i++ )) ; do 
+    if [ $i -eq 2 ] ; then
+	echo "Hit 2"
+    fi
+    j=4
+done
+
+#
+# Check line numbers in command substitution
+#
+echo $(sourced_fn)
+echo `sourced_fn`
+x=$((sourced_fn))
+x={ sourced_fn }
+
+# Make sure we step into sourced_fn as a command when we request to do so.
+# Vanilla bash 2.0 doesn't do.
+set -o functrace
+x={ sourced_fn }
+
+# Should see line number of xyzzy below. Vanilla bash 2.05b doesn't do
+case xyzzy in
+ a )
+    x=5
+    ;; 
+ xyzz? )
+    case 3 in 
+      2 ) 
+	x=6 ;;
+      3 ) 
+	echo "got it" ;;
+      * ) echo "no good" ;;
+      esac
+    ;;
+ * )
+esac
+
+# Should see line numbers for initial for lines.
+for i in 0 1 ; do
+  for j in 3 4 ; do
+    ((x=i+j))
+  done
+done
+
+${THIS_SH} ./dbg-support3.sub
diff --git a/tests/dbg-support2.right b/tests/dbg-support2.right
new file mode 100644
index 0000000..5727d1f
--- /dev/null
+++ b/tests/dbg-support2.right
@@ -0,0 +1,7 @@
+lineno: 29 (18) main
+lineno: 30 (18) main
+x is 1
+lineno: 31 (18) main
+lineno: 32 (18) main
+lineno: 33 (18) main
+x is 1
diff --git a/tests/dbg-support2.tests b/tests/dbg-support2.tests
new file mode 100644
index 0000000..c33251d
--- /dev/null
+++ b/tests/dbg-support2.tests
@@ -0,0 +1,33 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+#
+# Test correct trap return codes = 2 means skip execution.
+shopt -s extdebug
+print_trap() {
+   echo "lineno: $1 ($LINENO) ${FUNCNAME[1]}"
+   if [[ $debug_exit == 2 ]] ; then
+     debug_exit=0
+     return 2
+   fi
+   return 0
+}
+
+debug_exit=0
+trap 'print_trap $LINENO' DEBUG
+
+x=1
+echo "x is $x"
+debug_exit=2
+x=2
+echo "x is $x"
diff --git a/tests/dbg-support3.sub b/tests/dbg-support3.sub
new file mode 100644
index 0000000..146831f
--- /dev/null
+++ b/tests/dbg-support3.sub
@@ -0,0 +1,52 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+shopt -s extdebug
+
+callstack(){
+ deep=${#BASH_ARGV[*]}
+ echo "deep $deep"
+ i=0
+ for ff in ${BASH_ARGV[@]}
+ do
+  echo "$i $ff"
+  i=$(($i+1))
+ done
+}
+
+f3()
+{
+	echo $FUNCNAME: calling callstack
+	callstack
+	echo FUNCNAME stack: ${FUNCNAME[@]}
+	caller 0
+	echo $FUNCNAME: returning
+}
+
+f2()
+{
+	echo $FUNCNAME: calling f3
+	f3 3 z
+	echo $FUNCNAME: return from f3
+}
+
+f1()
+{
+	echo $FUNCNAME: calling f2
+	f2 2 y
+	echo $FUNCNAME: return from f2
+}
+
+echo main: calling f1
+f1 1 x
+echo main: f1 returns
diff --git a/tests/dollar-at-star b/tests/dollar-at-star
new file mode 100755
index 0000000..d480898
--- /dev/null
+++ b/tests/dollar-at-star
@@ -0,0 +1,313 @@
+# first, let's start with the basics
+
+recho "$@"
+recho "$*"
+
+recho $@
+recho $*
+
+foo=$*
+foo=$@
+
+foo="$*"
+foo="$@"
+
+unset -v bar
+
+foo=${bar:-$*}
+foo=${bar:-$@}
+
+foo=${bar:-"$*"}
+foo=${bar:-"$@"}
+
+foo=${!*}
+foo=${!@}
+
+set a b
+
+recho "$*"
+
+# If IFS is null, the parameters are joined without separators
+IFS=''
+recho "$*"
+
+# If IFS is unset, the parameters are separated by spaces
+unset IFS
+recho "${*}"
+
+recho "$@"
+recho $@
+
+IFS='/'
+set bob 'tom dick harry' joe
+set $*
+recho $#
+recho $1
+recho $2
+recho $3
+
+set bob 'tom dick harry' joe
+set ${*}
+recho $#
+recho $1
+recho $2
+recho $3
+
+set bob 'tom dick harry' joe
+set $@
+recho $#
+recho $1
+recho $2
+recho $3
+
+set bob 'tom dick harry' joe
+set ${@}
+recho $#
+recho $1
+recho $2
+recho $3
+
+# according to POSIX.2, unquoted $* should expand to multiple words if
+# $IFS is null, just like unquoted $@
+IFS=''
+set bob 'tom dick harry' joe
+set $*
+recho $#
+recho $1
+recho $2
+recho $3
+
+set bob 'tom dick harry' joe
+set $@
+recho $#
+recho $1
+recho $2
+recho $3
+
+# if IFS is unset, the individual positional parameters are split on
+# " \t\n" if $* or $@ are unquoted
+unset IFS
+set bob 'tom dick harry' joe
+set $*
+recho $#
+recho $1
+recho $2
+recho $3
+
+set bob 'tom dick harry' joe
+set $@  
+recho $#                                              
+recho $1
+recho $2
+recho $3
+
+# but not for "$@" or "$*"
+set bob 'tom dick harry' joe
+set "$*"
+recho $#
+recho $1
+recho $2
+recho $3
+
+set bob 'tom dick harry' joe
+set "$@"
+recho $#
+recho $1
+recho $2
+recho $3
+
+# POSIX.2 says these should both expand the positional parameters
+# to multiple words
+set a b c d e
+IFS=""
+recho $@
+recho "$@"
+
+# this example is straight from the POSIX.2 rationale
+set foo bar bam
+
+recho "$@"
+recho "$*"
+
+unset IFS
+
+recho "$@"
+recho $@
+recho "$*"
+
+IFS=:
+
+# special variables
+set -- 1 2 3 4 5 6 7 8 9 10
+
+bar=${*}
+foo=$*
+echo foo = "$foo"
+echo bar = "$bar"
+
+foo1=$@
+bar1=${@}
+
+echo foo1 = "$foo1"
+echo bar1 = "$bar1"
+
+foo2="$*"
+bar2="${*}"
+
+echo foo2 = "$foo2"
+echo bar2 = "$bar2"
+
+eval foo3='$*' bar3='${*}'
+echo foo3 = "$foo3"
+echo bar3 = "$bar3"
+
+case $* in
+*\:*)	echo ok 1;;
+*)	echo bad 1;;
+esac
+
+case $@ in
+*\:*)	echo bad 2;;
+*)	echo ok 2;;
+esac
+
+case "$*" in
+*\:*)	echo ok 3;;
+*)	echo bad 3;;
+esac
+
+case "$@" in
+*\:*)	echo bad 4;;
+*)	echo ok 4;;
+esac
+
+IFS=$' \t\n'
+
+bar=${*}
+foo=$*
+echo foo = "$foo"
+echo bar = "$bar"
+
+foo1=$@
+bar1=${@}
+
+echo foo1 = "$foo1"
+echo bar1 = "$bar1"
+
+foo2="$*"
+bar2="${*}"
+
+echo foo2 = "$foo2"
+echo bar2 = "$bar2"
+
+eval foo3='$*' bar3='${*}'
+echo foo3 = "$foo3"
+echo bar3 = "$bar3"
+
+case $* in
+*\ *)	echo ok 1;;
+*)	echo bad 1;;
+esac
+
+case $@ in
+*\ *)	echo ok 2;;
+*)	echo bad 2;;
+esac
+
+case "$*" in
+*\ *)	echo ok 3;;
+*)	echo bad 3;;
+esac
+
+case "$@" in
+*\ *)	echo ok 4;;
+*)	echo bad 4;;
+esac
+
+# tests for the effect of quoting $* and $@ in an assignment context (plus
+# arrays) -- bugs through bash 4.2
+${THIS_SH} ./dollar-at-star1.sub
+
+# more tests for expanding $@ and $* in a context where there is no word
+# splitting
+${THIS_SH} ./dollar-at-star2.sub
+${THIS_SH} ./dollar-at-star3.sub
+${THIS_SH} ./dollar-at-star4.sub
+${THIS_SH} ./dollar-at-star5.sub
+${THIS_SH} ./dollar-at-star6.sub
+${THIS_SH} ./dollar-at-star7.sub
+
+# tests for expansions of $@ and ${a[@]} (vs. $* and ${a[*]}) on the RHS of
+# assignment statements with non-default IFS: $@ expands to args or array
+# members separated by spaces
+${THIS_SH} ./dollar-at-star8.sub
+
+# more tests of the expansions of $@ and $* (and their array equivalents)
+# with different values for IFS
+${THIS_SH} ./dollar-at-star9.sub
+
+# tests for special expansion of "$*" and "${array[*]}" when used with other
+# expansions -- bugs through bash-2.05b
+${THIS_SH} ./dollar-star1.sub
+
+# tests for expansion of "$@" on rhs of things like ${param:+word}.  Bugs
+# though bash-2.05b
+${THIS_SH} ./dollar-at1.sub
+
+# tests for expansion of other variables in double-quoted strings containing
+# $@.  Bugs through bash-2.05b
+${THIS_SH} ./dollar-at2.sub
+
+# tests for various expansions of $* in different contexts -- word split,
+# no splitting, etc. when $IFS is NUL
+${THIS_SH} ./dollar-star2.sub
+
+# tests for expansions of "${array[*]}" and "${array[@]}" when $IFS is not the
+# default and the array contains null elements
+${THIS_SH} ./dollar-star3.sub
+
+# test for set -u and expansions of $@ when there are no positional parameters
+${THIS_SH} ./dollar-at3.sub
+# test for set -u and expansions of $* when there are no positional parameters
+${THIS_SH} ./dollar-star4.sub
+
+# tests for expansions of $* when IFS is null
+${THIS_SH} ./dollar-star5.sub
+
+# tests for inappropriate word splitting through bash-4.2
+${THIS_SH} ./dollar-at4.sub
+
+# tests for problems with "$@" preceded and followed by other quoted expansions
+# through bash-4.2
+${THIS_SH} ./dollar-at5.sub
+
+# tests for problems with "${@:1}" and other expansions with null entries
+# in positional parameters
+${THIS_SH} ./dollar-at6.sub
+
+# tests for expansions of $* when $1 == ""; problem through bash-4.2
+${THIS_SH} ./dollar-star6.sub
+
+# tests for expansions of $* (unquoted) when IFS changes (e.g., ${IFS:=-})
+# problem through bash-4.2
+${THIS_SH} ./dollar-star7.sub
+
+# tests for expansions of $* (unquoted) when IFS is null and word splitting is
+# not going to be performed.
+# problem through bash-4.4 in some parameter expansion contexts
+${THIS_SH} ./dollar-star8.sub
+
+# tests for expansions of "$@" when there are no positional parameter or when
+# $1 == '' and the expansion is preceded by something that results in a quoted
+# null string
+${THIS_SH} ./dollar-at7.sub
+
+# tests for expansions of $* when in an assignment context (no splitting) and
+# IFS is null
+${THIS_SH} ./dollar-star9.sub
+
+# more tests for expansions of $* when not splitting with IFS set or unset and
+# null strings as the positional parameters
+${THIS_SH} ./dollar-star10.sub
+
+exit 0
diff --git a/tests/dollar-at-star1.sub b/tests/dollar-at-star1.sub
new file mode 100644
index 0000000..ef15efc
--- /dev/null
+++ b/tests/dollar-at-star1.sub
@@ -0,0 +1,36 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# from dan douglas
+expassign()
+{
+	typeset -a a
+	a=("$@")
+	typeset var asn
+
+	while IFS= read -r asn; do
+		IFS=: command eval "$asn"
+		printf '%-14s... %s\n' "$asn" "$var"
+	done <<\EOF
+var=${a[*]}
+var="${a[*]}"
+var=$*
+var="$*"
+var=${a[@]}
+var="${a[@]}"
+var=$@
+var="$@"
+EOF
+}
+
+expassign one:::two three:::four
diff --git a/tests/dollar-at-star2.sub b/tests/dollar-at-star2.sub
new file mode 100644
index 0000000..64ab1eb
--- /dev/null
+++ b/tests/dollar-at-star2.sub
@@ -0,0 +1,220 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+OIFS="$IFS"
+foo='   ,foo'
+set -- "$foo"
+
+if [[ $foo = ,* ]]; then echo bad 1; else echo ok 1; fi
+if [[ $@ = ,* ]]; then echo bad 2; else echo ok 2; fi
+if [[ $* = ,* ]]; then echo bad 3; else echo ok 3; fi
+if [[ ${@} = ,* ]]; then echo bad 4; else echo ok 4; fi
+if [[ ${*} = ,* ]]; then echo bad 5; else echo ok 5; fi
+if [[ $1 = ,* ]]; then echo bad 6; else echo ok 6; fi
+
+set -- '   ,foo'
+if [[ $foo = ,* ]]; then echo bad 7; else echo ok 7; fi
+if [[ $@ = ,* ]]; then echo bad 8; else echo ok 8; fi
+if [[ $* = ,* ]]; then echo bad 9; else echo ok 9; fi
+if [[ ${@} = ,* ]]; then echo bad 10; else echo ok 10; fi
+if [[ ${*} = ,* ]]; then echo bad 11; else echo ok 11; fi
+if [[ $1 = ,* ]]; then echo bad 12; else echo ok 12; fi
+
+IFS=
+if [[ $@ = ,* ]]; then echo bad 13; else echo ok 13; fi
+if [[ $* = ,* ]]; then echo bad 14; else echo ok 14; fi
+IFS="$OIFS"
+
+foo='   ,foo'
+set -- '   ' ',foo'
+
+if [[ $@ = ,* ]]; then echo bad at 1; else echo ok at 1; fi
+if [[ ${@} = ,* ]]; then echo bad at 2; else echo ok at 2; fi
+
+if [[ $* = ,* ]]; then echo bad star 1; else echo ok star 1; fi
+if [[ ${*} = ,* ]]; then echo bad star 2; else echo ok star 2; fi
+
+foo='   ,foo'
+set -- "$foo"
+
+# expand_string_for_rhs
+
+foo2=$@
+echo "$foo2"
+
+foo2=$*
+echo "$foo2"
+
+foo2="$@"
+echo "$foo2"
+
+foo2="$*"
+echo "$foo2"
+
+# expand_word_unsplit
+case $@ in
+$foo2)	echo ok at 1 ;;
+*)	echo bad at 1 ;;
+esac
+
+# also uses expand_word_leave_quoted
+case $@ in
+$@)	echo ok at 2;;
+*)	echo bad at 2;;
+esac
+
+case $@ in
+$foo)	echo ok at 3 ;;
+*)	echo bad at 3;;
+esac
+
+# expand_word_unsplit
+case $* in
+$foo2)	echo ok star 1 ;;
+*)	echo bad star 1 ;;
+esac
+
+# also uses expand_word_leave_quoted
+case $* in
+$*)	echo ok star 2;;
+*)	echo bad star 2;;
+esac
+
+case $* in
+$foo)	echo ok star 3 ;;
+*)	echo bad star 3;;
+esac
+
+case $@ in
+$*)	echo ok at-star 1;;
+*)	echo bad at-star 1;;
+esac
+
+case $* in
+$@)	echo ok at-star 2;;
+*)	echo bad at-star 2;;
+esac
+
+foo='a b c'
+set -- $foo
+
+# expand_string_for_rhs
+IFS='|'
+foo2=$@
+echo "$foo2"
+
+foo2=$*
+echo "$foo2"
+
+foo2="$@"
+echo "$foo2"
+
+foo2="$*"
+echo "$foo2"
+
+foo="a b c"
+set -- $foo
+
+if [[ $@ = $foo ]]; then echo ok at 1; else echo bad at 1; fi
+if [[ $foo = $@ ]]; then echo ok at 2; else echo bad at 2; fi
+
+case $@ in
+$@)	echo ok at 3 ;;
+*)	echo bad at 3 ;;
+esac
+
+case $@ in
+$foo)	echo ok at 4;;
+*)	echo bad at 4;;
+esac
+
+case $foo in
+$@)	echo ok at 5;;
+*)	echo bad at 5;;
+esac
+IFS="$OIFS"
+
+foo="a b c"
+set -- $foo
+
+IFS=:
+if [[ $@ = $foo ]]; then echo ok at 1; else echo bad at 1; fi
+if [[ $foo = $@ ]]; then echo ok at 2; else echo bad at 2; fi
+
+case $@ in
+$@)	echo ok at 3 ;;
+*)	echo bad at 3 ;;
+esac
+
+case $@ in
+$foo)	echo ok at 4;;
+*)	echo bad at 4;;
+esac
+
+case $foo in
+$@)	echo ok at 5;;
+*)	echo bad at 5;;
+esac
+IFS="$OIFS"
+
+foo="a b c"
+set -- $foo
+
+IFS='|'
+foo2=$@
+
+case $@ in
+$@)	echo ok at 1 ;;
+*)	echo bad at 1 ;;
+esac
+
+case $foo2 in
+$foo)	echo ok at 2;;
+*)	echo bad at 2;;
+esac
+
+case $foo in
+$foo2)	echo ok at 3;;
+*)	echo bad at 3;;
+esac
+
+case $foo in
+$foo)	echo ok at 4;;
+*)	echo bad at 4;;
+esac
+
+case $foo2 in
+$foo2)	echo ok at 5;;
+*)	echo bad at 5;;
+esac
+
+case $foo2 in
+$@)	echo ok at 6;;
+*)	echo bad at 6;;
+esac
+
+case $@ in
+$foo2)	echo ok at 7;;
+*)	echo bad at 7;;
+esac
+
+case $foo in
+$@)	echo ok at 8;;
+*)	echo bad at 8;;
+esac
+
+case $@ in
+$foo)	echo ok at 9;;
+*)	echo bad at 9;;
+esac
+IFS="$OIFS"
diff --git a/tests/dollar-at-star3.sub b/tests/dollar-at-star3.sub
new file mode 100644
index 0000000..da05444
--- /dev/null
+++ b/tests/dollar-at-star3.sub
@@ -0,0 +1,57 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+unset f ; f=abcd
+
+first_char=${f[@]:0:1}
+recho $first_char
+
+first_char=${f[0]:0:1}
+recho $first_char
+
+first_char=${f:0:1}
+recho $first_char
+
+first_char="${f[@]:0:1}"
+recho $first_char
+
+first_char="${f[@]:0:1}"
+recho $first_char
+
+first_char="${f[0]:0:1}"
+recho $first_char
+
+first_char="${f:0:1}"
+recho $first_char
+
+unset f;
+f=( one two three )
+first_word=${f[@]:0:1}
+recho $first_word
+
+first_word=${f[0]:0:1}
+recho $first_word
+
+first_word=${f:0:1}
+recho $first_word
+
+unset f;
+f=( one two three )
+first_word=${f[@]:0:1}
+recho $first_word
+
+set -- abc def ghi
+
+printf '<%s> ' "123 $@ 456"; echo
+printf '<%s> ' "123 $@\ 456"; echo
+
diff --git a/tests/dollar-at-star4.sub b/tests/dollar-at-star4.sub
new file mode 100644
index 0000000..9f7da8e
--- /dev/null
+++ b/tests/dollar-at-star4.sub
@@ -0,0 +1,112 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# tests for quoted and unquoted, split and unsplit expansions of $@ and $*
+# Posix interpretation 221 speaks to this issue
+
+set -- a b
+IFS=
+x=abc
+
+printf "<%s>\n" ${x#$*}
+
+a="a bc"
+echo ${a#$*}
+unset x a
+
+a=$@
+echo "$a"
+
+a=$*
+echo "$a"
+
+printf '<%s>' $@ ; echo
+
+IFS=' 	
+'
+
+a=$@
+echo "$a"
+
+a=$*
+echo "$a"
+
+unset a
+
+unset IFS
+set a b "c d"
+printf '<%s>' $* ; echo
+printf '<%s>' ${q-$*} ; echo
+
+IFS=
+set a b "c d"
+printf '<%s>' $* ; echo
+printf '<%s>' ${q-$*} ; echo
+
+IFS=:
+set a b
+printf '<%s>' ${foo=$*} ; echo
+printf '<%s>' "${foo}" ; echo
+
+unset foo
+IFS=' 	
+'
+printf '<%s>' ${foo=$@} ; echo
+printf '<%s>' "$foo" ; echo
+
+IFS=?
+set a c
+foo=abcd
+
+echo ${foo#"$*"}
+echo "${foo#$*}"
+
+echo "${foo#'a?c'}"
+echo "${foo#a?c}"
+
+IFS=?
+set a c
+str=a$'\001'c
+pat=a$'\001'
+echo "${str#$pat}"
+
+set a b
+IFS=:
+
+a=$@
+recho "$a"
+
+recho ${foo=$*}
+recho "$foo"
+
+unset foo
+IFS=' 	
+'
+recho ${foo=$@}
+recho "$foo"
+
+shift $#
+unset foo x
+
+set -- a b
+x=abc
+
+IFS=
+printf "<%s>\n" ${x#$*}
+printf "<%s>\n" "${x#$*}"
+
+x=abcd
+set a c
+IFS='?'
+printf "<%s>\n" ${x#$*}
+printf "<%s>\n" "${x#$*}"
diff --git a/tests/dollar-at-star5.sub b/tests/dollar-at-star5.sub
new file mode 100644
index 0000000..d07c61a
--- /dev/null
+++ b/tests/dollar-at-star5.sub
@@ -0,0 +1,66 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# testing various combinations of quoted and unquoted expansions of $@, and
+# whether they generate empty words after expansion
+
+n() { echo "$#"; }
+
+n "$@"
+n ${foo-"$@"}
+n "${foo-$@}"
+
+n ""$@
+n """$@"
+
+n $(true)$@
+n "$(true)$@"
+n "$(true)$@"
+n "$(true)""$@"
+
+n $xxx$@
+n "$xxx$@"
+n $xxx"$@"
+n "$xxx""$@"
+
+recho $xxx"$@"
+echo after 1
+
+recho "$xxx$@"
+echo after 2
+
+recho ${foo:-$xxx"$@"}
+echo after 3
+
+# this is where these things start to differ
+echo same as 1
+recho "${foo:-$xxx"$@"}"
+echo same as 2
+recho "${foo:-$xxx$@}"
+
+echo null fields
+recho ""$@
+recho """$@"
+
+echo null fields in rhs
+echo null string with unquoted '$@'
+recho ${foo:-""$@}
+echo null string with quoted '$@'
+recho ${foo:-"""$@"}
+
+echo assignment
+recho "${foo=$@}"
+echo variable
+recho "$foo"
+echo dollar-at
+recho "${@}"
diff --git a/tests/dollar-at-star6.sub b/tests/dollar-at-star6.sub
new file mode 100644
index 0000000..09353b8
--- /dev/null
+++ b/tests/dollar-at-star6.sub
@@ -0,0 +1,42 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+OIFS="$IFS"
+arr=(a b c)
+
+recho ${arr[@]@Q}
+recho "${arr[@]@Q}"
+
+IFS="'"
+recho ${arr[@]@Q}
+recho "${arr[@]@Q}"
+IFS="$OIFS"
+
+arr=("'a'" "'b'" "'c'")
+
+IFS="'"
+recho ${arr[@]}
+recho "${arr[@]}"
+IFS="$OIFS"
+
+IFS="'"
+a="'a'"
+recho $a
+recho "$a"
+IFS="$OIFS"
+
+set -- "'a'" "'b'" "'c'"
+
+IFS="'"
+recho "${@}"
+recho "$@"
diff --git a/tests/dollar-at-star7.sub b/tests/dollar-at-star7.sub
new file mode 100644
index 0000000..e4e63b7
--- /dev/null
+++ b/tests/dollar-at-star7.sub
@@ -0,0 +1,38 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+IFS=''			# testing with only empty IFS
+
+set -- this is a test
+
+printf '|%s|\n' ${1+"$@"}
+echo
+printf '|%s|\n' "${1+$@}"
+echo
+printf '|%s|\n' "$@"
+echo
+
+printf '|%s|\n' ${1-"$@"}
+printf '|%s|\n' "${1-$@}"
+
+echo
+: ${foo:="$@"}
+printf '|%s|\n' "$foo"
+
+unset foo
+: "${foo:=$@}"
+printf '|%s|\n' "$foo"
+
+unset foo
+printf '|%s|\n' ${foo-"$@"}
+printf '|%s|\n' "${foo-$@}"
diff --git a/tests/dollar-at-star8.sub b/tests/dollar-at-star8.sub
new file mode 100644
index 0000000..7e1b688
--- /dev/null
+++ b/tests/dollar-at-star8.sub
@@ -0,0 +1,14 @@
+function f {
+   typeset -a a
+   a=("$@")
+   typeset IFS=,
+   typeset a1="${a[@]} ${a[*]} $@ $* ${@} ${*}"
+   typeset a2=${a[@]}\ ${a[*]}\ $@\ $*\ ${@}\ ${*} a3 a4
+   a3="${a[@]} ${a[*]} $@ $* ${@} ${*}"
+   a4=${a[@]}\ ${a[*]}\ $@\ $*\ ${@}\ ${*}
+   unset -v IFS
+   printf '%s\n' "a1=$a1" "a2=$a2" "a3=$a3" "a4=$a4"
+}
+
+echo
+f a b c
diff --git a/tests/dollar-at-star9.sub b/tests/dollar-at-star9.sub
new file mode 100644
index 0000000..e5062f7
--- /dev/null
+++ b/tests/dollar-at-star9.sub
@@ -0,0 +1,278 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+IFS=$' \t\n'   # or any other IFS
+set -- ''
+recho ${v= "$*" }
+recho "$v"
+unset -v v
+
+IFS=''
+set -- '' ''
+recho ${v= "$*" }
+recho "$v"
+unset -v v
+
+IFS=$' \t\n'   # or any other IFS
+unset -v v
+
+set -- ''
+recho ${v= "$@" }
+recho "$v"
+unset v
+recho ${v= $@ }
+recho "$v"
+unset v
+recho ${v= $@"" }
+recho "$v"
+unset v
+recho ${v= ${@} }
+recho "$v"
+unset v
+recho ${v= ${@}"" }
+recho "$v"
+unset v
+
+set -- '' ''
+recho ${v= $@ }
+recho "$v"
+unset v
+recho ${v= "$@" }
+recho "$v"
+unset v
+recho "${v= $@}"
+recho "$v"
+unset v
+recho ${v= "$@"}
+recho "$v"
+unset v
+
+IFS=
+
+set -- X
+X=X
+
+recho ${0+ "$@" }
+recho ${0+ $@ }
+recho ${0+ $* }
+
+recho ${0+ "$X" }
+recho ${0+ $X }
+recho ${0+ $X }
+
+recho ${0+ "$@" }
+recho "$Y"
+unset Y
+recho ${0+ $@ }
+recho "$Y"
+unset Y
+recho ${0+ $* }
+recho "$Y"
+unset Y
+
+recho ${Y:= "$X" }
+recho "$Y"
+unset Y
+recho ${Y:= $X }
+recho "$Y"
+unset Y
+recho ${Y:= $X }
+recho "$Y"
+unset Y
+
+IFS=
+
+unset -v X Y
+
+set -- X Y
+X='X Y'
+
+recho ${0+ "$@" }
+recho ${0+ $@ }
+recho ${0+ $* }
+
+recho ${0+ "$X" }
+recho ${0+ $X }
+recho ${0+ $X }
+
+recho ${Y:= "$@" }
+recho "$Y"
+unset Y
+recho ${Y:= $@ }
+recho "$Y"
+unset Y
+recho ${Y:= $* }
+recho "$Y"
+unset Y
+
+recho ${Y:= "$X" }
+recho "$Y"
+unset Y
+recho ${Y:= $X }
+recho "$Y"
+unset Y
+recho ${Y:= $X }
+recho "$Y"
+unset Y
+
+IFS=''
+set -- ' X '
+
+unset x y
+
+x=$*
+y=${*:1}
+
+recho "$x"
+recho "$y"
+
+unset x y
+
+recho ${x=$*}
+recho ${y=${*:1}}
+
+set -- b a
+declare -A A=([b]= [a]=)
+
+x=$*
+y=${!A[*]}
+
+unset A
+
+recho "$x"
+recho "$y"
+
+unset x y
+
+recho ${x=$*}
+recho ${y=${!A[*]}}
+
+unset x y
+
+recho ${x-$*}
+recho ${y-${!A[*]}}	# this isn't right yet
+
+IFS=:
+set -- a b
+ind=*
+
+unset x y
+
+x=$*
+y=${!ind}
+
+recho "$x"
+recho "$y"
+
+unset x y
+
+recho ${x-$*}
+recho ${y-${!ind}}	# this isn't right yet
+
+unset x y
+
+recho ${x=$*}
+recho ${y=${!ind}}
+
+set -- ' X '
+IFS=$' \t\n'
+
+x=$*
+y=${!ind};
+
+recho "$x"
+recho "$y"
+
+IFS=''
+x=$*
+y=${!ind}
+
+recho "$x"
+recho "$y"
+
+IFS=:
+set -- a b
+ind=*
+
+unset x y
+
+recho ${x-$*}
+recho ${y-${!ind}}	# this isn't right yet
+
+unset x y
+
+recho ${x=$*}
+recho ${y=${!ind}}
+
+set -- ' X '
+IFS=$' \t\n'
+
+unset x y
+
+x=$*
+y=${!ind};
+
+recho "$x"
+recho "$y"
+
+IFS=''
+x=$*
+y=${!ind}
+
+recho "$x"
+recho "$y"
+
+IFS=''
+set -- $'\177'
+
+unset -v var
+
+recho "${*:1}"
+var=${*:1}
+recho "$var"
+
+unset var
+recho ${var=${*:1}}
+recho "$var"
+
+declare -a a=($'\177')
+
+unset var
+var=${a[*]:0}
+recho "$var"
+
+unset var
+recho ${var=${a[*]:0}}
+unset var
+
+set -- $'\177'
+ind='*'
+
+recho $*
+var=${!ind}
+recho "$var"
+
+unset var
+recho ${var=${!ind}}
+recho "$var"
+
+declare -A A=([0]=$'\177')
+
+unset var
+var=${A[*]:0}
+recho "$var"
+
+# this isn't really right yet
+unset var
+recho ${var=${A[*]:0}}
+recho "$var"
diff --git a/tests/dollar-at1.sub b/tests/dollar-at1.sub
new file mode 100644
index 0000000..c5079d6
--- /dev/null
+++ b/tests/dollar-at1.sub
@@ -0,0 +1,42 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+echo_argc()
+{
+	echo $#
+}
+
+a()
+{
+	shift
+	echo_argc "$@"
+	echo_argc ${1:+"$@"}
+	echo_argc "${1:+$@}"
+	echo_argc 1 2 3
+}
+
+b()
+{
+	_IFS="$IFS"
+	IFS="$1"
+	shift
+	echo_argc "$@"
+	echo_argc ${1:+"$@"}
+	echo_argc "${1:+$@}"
+	echo_argc 1 2 3
+	IFS="$_IFS"
+}
+
+a "X" foo bar hoge
+
+b "X" foo bar hoge
diff --git a/tests/dollar-at2.sub b/tests/dollar-at2.sub
new file mode 100644
index 0000000..16defbd
--- /dev/null
+++ b/tests/dollar-at2.sub
@@ -0,0 +1,32 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+t1()
+{
+	xxx="echo $@"
+
+	recho "$xxx ; echo $@"
+}
+
+t2()
+{
+	xxx="echo $@"
+
+	recho "${xxx} ; echo $@"
+}
+
+t1 1
+t1 1 2
+
+t2 1
+t2 1 2
diff --git a/tests/dollar-at3.sub b/tests/dollar-at3.sub
new file mode 100644
index 0000000..76a65c1
--- /dev/null
+++ b/tests/dollar-at3.sub
@@ -0,0 +1,9 @@
+set -u
+
+echo ${#@}
+echo ${@:-bar}
+
+echo $@
+echo after 1
+echo ${@}
+echo after 2
diff --git a/tests/dollar-at4.sub b/tests/dollar-at4.sub
new file mode 100644
index 0000000..c8de866
--- /dev/null
+++ b/tests/dollar-at4.sub
@@ -0,0 +1,10 @@
+set 'a  b' 'c  d'
+
+recho "$@"
+recho $@
+
+quoted="$@"
+unquoted=$@
+
+recho "$quoted"
+recho "$unquoted"
diff --git a/tests/dollar-at5.sub b/tests/dollar-at5.sub
new file mode 100644
index 0000000..9b26c39
--- /dev/null
+++ b/tests/dollar-at5.sub
@@ -0,0 +1,95 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+args() { printf '<%s> ' "$@"; echo; }
+
+set -- 1 2 3 4 5
+
+args "${@} ${1}"
+args "${1} ${@}"
+args "${1}${@}${1}"
+args "${1} ${@} ${1}"
+args ${1}"$@"${1}
+args "$@"${1}
+args ${1}"$@"
+
+args "$@""${1}"
+args "${1}""$@"
+
+args "${@}foo"
+args ${@}${1}
+args ${@}foo
+
+IFS=
+args "$@""${1}"
+args "${1}""$@"
+
+args ${@}${1}
+args ${1}${@}
+args ${@}foo
+
+echo second set:
+IFS=$' \t\n'
+set -- '1 2' 3 4 5
+
+args "${@} ${1}"
+args "${1} ${@}"
+
+args "${1}${@}${1}"
+args "${1} ${@} ${1}"
+args ${1}"$@"${1}
+args "$@"${1}
+args ${1}"$@"
+
+args "$@""${1}"
+args "${1}""$@"
+
+args "${@}foo"
+args ${@}${1}
+args ${@}foo
+
+IFS=
+
+args "$@""${1}"
+args "${1}""$@"
+
+args ${@}${1}
+args ${1}${@}
+args ${@}foo
+
+echo third set:
+IFS=$' \t\n'
+
+alias declare=typeset
+
+a(){ echo
+     echo '"${@:2}a3 a2" a$1    #works as long as $1 and 3 are swapped'
+     echo  "${@:2}a3 a2" a$1
+           "${@:2}a3 a2" a$1
+     echo   $?
+        a=("${@}");}
+b(){ echo
+     echo '"${@:2}b$1 b2" b3    #fails!  why?'
+     echo  "${@:2}b$1 b2" b3
+           "${@:2}b$1 b2" b3
+     echo   $?
+        b=("${@}");}
+c(){ echo
+     echo  '${@:2}c$1 c2 c3     #works as long as quoting omitted'
+     echo   ${@:2}c$1 c2 c3
+            ${@:2}c$1 c2 c3
+     echo   $?
+        c=("${@}");}
+a x set y z;declare -p a
+b x set y z;declare -p b
+c x set y z;declare -p c
diff --git a/tests/dollar-at6.sub b/tests/dollar-at6.sub
new file mode 100644
index 0000000..791fd89
--- /dev/null
+++ b/tests/dollar-at6.sub
@@ -0,0 +1,43 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+set -- ''; 
+
+recho "${@}" x
+recho "${@:1}" x
+
+set -- "${@:1}"
+echo "$#" 
+
+set  -- '' ''
+
+recho "${@:1}" x 
+recho "${@:1:1}" x 
+
+typeset -a A	# ksh93 needs this
+A=('' '')
+recho "${A[@]:0}" x 
+
+recho "${A[@]:0:1}" x
+
+recho "${A[@]:1}" x 
+
+set -- ''
+
+recho "${@/foo/bar}"
+recho "${@^^[abcde]}"
+
+A=( '' )
+
+recho "${A[@]/foo/bar}"
+recho "${A[@],,[abcde]}"
diff --git a/tests/dollar-at7.sub b/tests/dollar-at7.sub
new file mode 100644
index 0000000..cde1164
--- /dev/null
+++ b/tests/dollar-at7.sub
@@ -0,0 +1,59 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+set -- ''
+
+recho 1 ''"$@"
+recho 2 """$@"
+
+recho 3 "$@""$@"
+recho 4 "$x""$@"
+
+set --
+
+echo -----
+recho 1 ''"$@"
+recho 2 """$@"
+
+recho 3 "$@""$@"
+recho 4 "$x""$@"
+
+set -- X
+
+echo ------
+recho 1 ''"${@/*}"
+recho 2 """${@/*}"
+
+recho 3 "$x""${@/*}"
+
+recho 4 ''"${@#X}"
+recho 5 """${@#X}"
+
+recho 6 "$x""${@#X}"
+
+set --
+
+echo -----
+recho 1 ''"${@/*}"
+recho 2 """${@/*}"
+
+recho 3 "$x""${@/*}"
+
+recho 4 ''"${@#X}"
+recho 5 """${@#X}"
+
+recho 6 "$x""${@#X}"
+
+echo -----
+recho 1 "$novar${*}$(echo)"
+recho 2 ''"$novar${@}$(echo)"
diff --git a/tests/dollar-star1.sub b/tests/dollar-star1.sub
new file mode 100644
index 0000000..3e5ec36
--- /dev/null
+++ b/tests/dollar-star1.sub
@@ -0,0 +1,44 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+set -- a b c
+x=(a b c); IFS='|'
+
+echo "${*/#/x}"
+echo "${x[*]/#/x}"
+
+echo "$*"
+echo "${x[*]}"
+
+echo "$@"
+echo "${x[@]}"
+
+echo "${@/#/x}"
+echo "${x[@]/#/x}"
+
+echo "${*:1:2}"
+echo "${x[*]:1:2}"
+
+echo "${@:1:2}"
+echo "${x[@]:1:2}"
+
+IFS=$' \t\n'
+set -- xa xb xc
+x=(xa xb xc)
+IFS='|'
+
+echo "${*#x}"
+echo "${x[*]#x}"
+
+echo "$*"
+echo "${x[*]}"
diff --git a/tests/dollar-star10.sub b/tests/dollar-star10.sub
new file mode 100644
index 0000000..fce9ec1
--- /dev/null
+++ b/tests/dollar-star10.sub
@@ -0,0 +1,92 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+oIFS=$IFS
+
+set -- ''
+
+unset v
+recho ${v= ''}
+recho $v
+unset v
+recho ${v=''}
+recho $v
+unset v
+recho ${v= $*}
+recho $v
+unset v
+recho ${v=$*}
+recho $v
+unset v
+recho ${v='' }
+recho $v
+unset v
+recho ${v= '' }
+recho $v
+unset v
+recho ${v=$* }
+recho $v
+unset v
+recho ${v= $* }
+recho $v
+
+unset IFS
+
+unset v
+recho ${v= ''}
+recho $v
+unset v
+recho ${v=''}
+recho $v
+unset v
+recho ${v= $*}
+recho $v
+unset v
+recho ${v=$*}
+recho $v
+unset v
+recho ${v='' }
+recho $v
+unset v
+recho ${v= '' }
+recho $v
+unset v
+recho ${v=$* }
+recho $v
+unset v
+recho ${v= $* }
+recho $v
+
+unset -v v
+IFS=$oIFS
+
+# This shouldn't output anything
+set -- '' ''
+
+unset -v v
+recho ${v=$*}
+unset -v v
+recho ${v= $*}
+unset -v v
+recho ${v=$* }
+unset -v v
+recho ${v= $* }
+
+unset -v v IFS
+recho ${v=$*}
+unset -v v
+recho ${v= $*}
+unset -v v
+recho ${v= $* }
+unset -v v
+recho ${v= $*}
diff --git a/tests/dollar-star2.sub b/tests/dollar-star2.sub
new file mode 100644
index 0000000..78e00a0
--- /dev/null
+++ b/tests/dollar-star2.sub
@@ -0,0 +1,39 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+set A B
+
+IFS=
+
+x=$*
+y="$*"
+
+recho "$x"
+recho "$y" 
+
+IFS=$' \t\n'
+
+set 'A B' 'C D'
+
+IFS=
+
+x=$*
+y="$*"
+
+recho "$x"
+recho "$y"
+
+recho $x
+recho $*
+recho $y
+recho "$*"
diff --git a/tests/dollar-star3.sub b/tests/dollar-star3.sub
new file mode 100644
index 0000000..a6ef09f
--- /dev/null
+++ b/tests/dollar-star3.sub
@@ -0,0 +1,31 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+IFS=/
+#file=/mnt/cdrom/RedHat/RPMS
+#recho "${file[*]:0:3}"
+
+i[0]=fooq
+i[1]=
+i[2]=barq
+i[3]=
+recho "${i[*]:0}"
+recho "${i[@]:0}"
+
+recho "${i[*]/q/!}"
+recho "${i[@]/q/!}"
+
+recho "${i[*]#?}"
+recho "${i[@]#?}"
+
+# Need to complete this with case-modifying expansion examples
diff --git a/tests/dollar-star4.sub b/tests/dollar-star4.sub
new file mode 100644
index 0000000..1b551f2
--- /dev/null
+++ b/tests/dollar-star4.sub
@@ -0,0 +1,9 @@
+set -u
+
+echo ${#*}
+echo ${*:-bar}
+
+echo $*
+echo after 1
+echo ${*}
+echo after 2
diff --git a/tests/dollar-star5.sub b/tests/dollar-star5.sub
new file mode 100644
index 0000000..abd8bcc
--- /dev/null
+++ b/tests/dollar-star5.sub
@@ -0,0 +1,29 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+set -- a b
+IFS=
+
+echo $*
+echo "$*"
+
+a=abcd
+echo "${a#$*}"
+
+case ab in
+$*)	echo ok 1;;
+esac
+
+case $* in
+ab)	echo ok 2 ;;
+esac
diff --git a/tests/dollar-star6.sub b/tests/dollar-star6.sub
new file mode 100644
index 0000000..095ec04
--- /dev/null
+++ b/tests/dollar-star6.sub
@@ -0,0 +1,32 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+recho "A${*:-w}R"
+recho "A${*-w}R"
+recho "A${*}R"
+
+set -- ""
+
+recho "A${*:-w}R"
+recho "A${*-w}R"
+recho "A${*}R"
+
+set -- $'\177'
+
+recho "A${*:+w}R"
+recho "A${*+w}R"
+recho "A${*}R"
+
+recho A${*:+w}R
+recho A${*+w}R
+recho A${*}R
diff --git a/tests/dollar-star7.sub b/tests/dollar-star7.sub
new file mode 100644
index 0000000..db352bf
--- /dev/null
+++ b/tests/dollar-star7.sub
@@ -0,0 +1,43 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# if IFS side effects in ${IFS=} assignments take place, how do you cope with
+# later changes to IFS in the same set of expansions?  You've already
+# committed to using the first character of the (old) IFS to expand $* in
+# the previous expansions, and changing it to not include ' ', for instance,
+# results in the first couple of ${*} below not being split at all
+
+set -f -- a b c
+
+unset -v IFS
+printf '<%s> ' ${*}${IFS=}${*}${IFS:=-}"${*}"
+echo
+printf "after 1: IFS "
+echo "${IFS-unset}"
+recho "$*"
+
+set -f -- a 'b c' d
+unset -v IFS
+printf '<%s> ' ${*}${IFS=}${*}${IFS:=-}"${*}"
+echo
+printf "after 2: IFS "
+echo "${IFS-unset}"
+recho "$*"
+
+unset -v IFS
+recho $*
+recho "$*"
+
+IFS=' '
+recho $*
+recho "$*"
diff --git a/tests/dollar-star8.sub b/tests/dollar-star8.sub
new file mode 100644
index 0000000..e626564
--- /dev/null
+++ b/tests/dollar-star8.sub
@@ -0,0 +1,34 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+IFS=
+set "abc" "def ghi" "jkl"
+
+set ${1+$*}
+printf '<%s>\n' "$#" "$@"
+
+set "abc" "def ghi" "jkl"
+set $*
+printf '<%s>\n' "$#" "$@"
+
+printf '<%s>\n' $* ;
+printf '<%s>\n' ${q:-$*} 
+printf '<%s>\n' "${q:-$*}"
+
+IFS=:
+printf '<%s>\n' $* ;
+printf '<%s>\n' ${q:-$*} 
+printf '<%s>\n' "${q:-$*}"
+
+unset -v IFS
+printf '<%s>\n' $* $@
diff --git a/tests/dollar-star9.sub b/tests/dollar-star9.sub
new file mode 100644
index 0000000..d46de46
--- /dev/null
+++ b/tests/dollar-star9.sub
@@ -0,0 +1,59 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+set -- 1 2
+
+IFS=
+
+a=$* b=${*}
+c=${*/} d=${*#} e=${*%} f=${*:1}
+printf '<%s>' "$a" "$b" "$c" "$d" "$e" "$f"; echo
+
+unset a b c d e f
+: ${a=$*} ${b=${*}} ${c=${*/}}
+: ${d=${*#}} ${e=${*%}} ${f=${*:1}}
+printf '<%s>' "$a" "$b" "$c" "$d" "$e" "$f" ; echo
+
+unset f g
+f=${*,,} g=${*@Q}
+printf '<%s>' "$f" "$g" ; echo
+
+unset -v a b c d e f g
+unset var
+
+# resetting IFS here
+
+IFS=$' \t\n'
+
+printf '%s\n' "${*:1}"
+var=${*:1}; printf '%s\n' "$var"
+var="${*:1}"; printf '%s\n' "$var"
+
+unset var
+recho ${var-${*}}
+recho ${var-${*:1}}
+recho "${var-${*:1}}"
+recho ${var-"${*:1}"}
+
+unset var
+recho ${var=${*}}
+printf 'var=%s\n' "$var"
+unset var
+recho ${var=${*:1}}
+printf 'var=%s\n' "$var"
+
+a=${*:1}
+recho "$a"
+
+: ${b=${*:1}}
+recho "$b"
diff --git a/tests/dollar.right b/tests/dollar.right
new file mode 100644
index 0000000..09910d7
--- /dev/null
+++ b/tests/dollar.right
@@ -0,0 +1,677 @@
+argv[1] = <>
+argv[1] = <a b>
+argv[1] = <ab>
+argv[1] = <a b>
+argv[1] = <a>
+argv[2] = <b>
+argv[1] = <a>
+argv[2] = <b>
+argv[1] = <3>
+argv[1] = <bob>
+argv[1] = <tom dick harry>
+argv[1] = <joe>
+argv[1] = <3>
+argv[1] = <bob>
+argv[1] = <tom dick harry>
+argv[1] = <joe>
+argv[1] = <3>
+argv[1] = <bob>
+argv[1] = <tom dick harry>
+argv[1] = <joe>
+argv[1] = <3>
+argv[1] = <bob>
+argv[1] = <tom dick harry>
+argv[1] = <joe>
+argv[1] = <3>
+argv[1] = <bob>
+argv[1] = <tom dick harry>
+argv[1] = <joe>
+argv[1] = <3>
+argv[1] = <bob>
+argv[1] = <tom dick harry>
+argv[1] = <joe>
+argv[1] = <5>
+argv[1] = <bob>
+argv[1] = <tom>
+argv[1] = <dick>
+argv[1] = <5>
+argv[1] = <bob>
+argv[1] = <tom>
+argv[1] = <dick>
+argv[1] = <1>
+argv[1] = <bob>
+argv[2] = <tom>
+argv[3] = <dick>
+argv[4] = <harry>
+argv[5] = <joe>
+argv[1] = <3>
+argv[1] = <bob>
+argv[1] = <tom>
+argv[2] = <dick>
+argv[3] = <harry>
+argv[1] = <joe>
+argv[1] = <a>
+argv[2] = <b>
+argv[3] = <c>
+argv[4] = <d>
+argv[5] = <e>
+argv[1] = <a>
+argv[2] = <b>
+argv[3] = <c>
+argv[4] = <d>
+argv[5] = <e>
+argv[1] = <foo>
+argv[2] = <bar>
+argv[3] = <bam>
+argv[1] = <foobarbam>
+argv[1] = <foo>
+argv[2] = <bar>
+argv[3] = <bam>
+argv[1] = <foo>
+argv[2] = <bar>
+argv[3] = <bam>
+argv[1] = <foo bar bam>
+foo = 1:2:3:4:5:6:7:8:9:10
+bar = 1:2:3:4:5:6:7:8:9:10
+foo1 = 1 2 3 4 5 6 7 8 9 10
+bar1 = 1 2 3 4 5 6 7 8 9 10
+foo2 = 1:2:3:4:5:6:7:8:9:10
+bar2 = 1:2:3:4:5:6:7:8:9:10
+foo3 = 1:2:3:4:5:6:7:8:9:10
+bar3 = 1:2:3:4:5:6:7:8:9:10
+ok 1
+ok 2
+ok 3
+ok 4
+foo = 1 2 3 4 5 6 7 8 9 10
+bar = 1 2 3 4 5 6 7 8 9 10
+foo1 = 1 2 3 4 5 6 7 8 9 10
+bar1 = 1 2 3 4 5 6 7 8 9 10
+foo2 = 1 2 3 4 5 6 7 8 9 10
+bar2 = 1 2 3 4 5 6 7 8 9 10
+foo3 = 1 2 3 4 5 6 7 8 9 10
+bar3 = 1 2 3 4 5 6 7 8 9 10
+ok 1
+ok 2
+ok 3
+ok 4
+var=${a[*]}   ... one:::two:three:::four
+var="${a[*]}" ... one:::two:three:::four
+var=$*        ... one:::two:three:::four
+var="$*"      ... one:::two:three:::four
+var=${a[@]}   ... one:::two three:::four
+var="${a[@]}" ... one:::two three:::four
+var=$@        ... one:::two three:::four
+var="$@"      ... one:::two three:::four
+ok 1
+ok 2
+ok 3
+ok 4
+ok 5
+ok 6
+ok 7
+ok 8
+ok 9
+ok 10
+ok 11
+ok 12
+ok 13
+ok 14
+ok at 1
+ok at 2
+ok star 1
+ok star 2
+   ,foo
+   ,foo
+   ,foo
+   ,foo
+ok at 1
+ok at 2
+ok at 3
+ok star 1
+ok star 2
+ok star 3
+ok at-star 1
+ok at-star 2
+a b c
+a|b|c
+a b c
+a|b|c
+ok at 1
+ok at 2
+ok at 3
+ok at 4
+ok at 5
+ok at 1
+ok at 2
+ok at 3
+ok at 4
+ok at 5
+ok at 1
+ok at 2
+ok at 3
+ok at 4
+ok at 5
+ok at 6
+ok at 7
+ok at 8
+ok at 9
+argv[1] = <a>
+argv[1] = <a>
+argv[1] = <a>
+argv[1] = <a>
+argv[1] = <a>
+argv[1] = <a>
+argv[1] = <a>
+argv[1] = <one>
+argv[1] = <o>
+argv[1] = <o>
+argv[1] = <one>
+<123 abc> <def> <ghi 456> 
+<123 abc> <def> <ghi\ 456> 
+<c>
+a bc
+a b
+ab
+<a><b>
+a b
+a b
+<a><b><c><d>
+<a><b><c><d>
+<a><b><c d>
+<a><b><c d>
+<a><b>
+<a:b>
+<a><b>
+<a b>
+abcd
+d
+abcd
+d
+c
+argv[1] = <a b>
+argv[1] = <abcd>
+argv[1] = <abcd>
+argv[1] = <a>
+argv[2] = <b>
+argv[1] = <a b>
+<c>
+<c>
+<d>
+<d>
+0
+0
+1
+1
+1
+0
+0
+0
+1
+0
+0
+0
+1
+after 1
+after 2
+after 3
+same as 1
+argv[1] = <>
+same as 2
+argv[1] = <>
+null fields
+argv[1] = <>
+argv[1] = <>
+null fields in rhs
+null string with unquoted $@
+argv[1] = <>
+null string with quoted $@
+argv[1] = <>
+assignment
+argv[1] = <>
+variable
+argv[1] = <>
+dollar-at
+argv[1] = <'a'>
+argv[2] = <'b'>
+argv[3] = <'c'>
+argv[1] = <'a'>
+argv[2] = <'b'>
+argv[3] = <'c'>
+argv[1] = <>
+argv[2] = <a>
+argv[3] = <>
+argv[4] = <>
+argv[5] = <b>
+argv[6] = <>
+argv[7] = <>
+argv[8] = <c>
+argv[1] = <'a'>
+argv[2] = <'b'>
+argv[3] = <'c'>
+argv[1] = <>
+argv[2] = <a>
+argv[3] = <>
+argv[4] = <>
+argv[5] = <b>
+argv[6] = <>
+argv[7] = <>
+argv[8] = <c>
+argv[1] = <'a'>
+argv[2] = <'b'>
+argv[3] = <'c'>
+argv[1] = <>
+argv[2] = <a>
+argv[1] = <'a'>
+argv[1] = <'a'>
+argv[2] = <'b'>
+argv[3] = <'c'>
+argv[1] = <'a'>
+argv[2] = <'b'>
+argv[3] = <'c'>
+|this|
+|is|
+|a|
+|test|
+
+|this|
+|is|
+|a|
+|test|
+
+|this|
+|is|
+|a|
+|test|
+
+|this|
+|this|
+
+|this is a test|
+|this is a test|
+|this|
+|is|
+|a|
+|test|
+|this|
+|is|
+|a|
+|test|
+
+a1=a b c a,b,c a b c a,b,c a b c a,b,c
+a2=a b c a,b,c a b c a,b,c a b c a,b,c
+a3=a b c a,b,c a b c a,b,c a b c a,b,c
+a4=a b c a,b,c a b c a,b,c a b c a,b,c
+argv[1] = <  >
+argv[1] = <  >
+argv[1] = <  >
+argv[1] = <  >
+argv[1] = <  >
+argv[1] = <  >
+argv[1] = <  >
+argv[1] = <  >
+argv[1] = <   >
+argv[1] = <   >
+argv[1] = <  >
+argv[1] = <  >
+argv[1] = <  >
+argv[1] = < X >
+argv[1] = < X >
+argv[1] = < X >
+argv[1] = < X >
+argv[1] = < X >
+argv[1] = < X >
+argv[1] = < X >
+argv[1] = <>
+argv[1] = < X >
+argv[1] = <>
+argv[1] = < X >
+argv[1] = <>
+argv[1] = < X >
+argv[1] = < X >
+argv[1] = < X >
+argv[1] = < X >
+argv[1] = < X >
+argv[1] = < X >
+argv[1] = < X>
+argv[2] = <Y >
+argv[1] = < X>
+argv[2] = <Y >
+argv[1] = < X>
+argv[2] = <Y >
+argv[1] = < X Y >
+argv[1] = < X Y >
+argv[1] = < X Y >
+argv[1] = < X Y >
+argv[1] = < X Y >
+argv[1] = < X Y >
+argv[1] = < X Y >
+argv[1] = < XY >
+argv[1] = < XY >
+argv[1] = < X Y >
+argv[1] = < X Y >
+argv[1] = < X Y >
+argv[1] = < X Y >
+argv[1] = < X Y >
+argv[1] = < X Y >
+argv[1] = < X >
+argv[1] = < X >
+argv[1] = < X >
+argv[1] = < X >
+argv[1] = <ba>
+argv[1] = <ba>
+argv[1] = <ba>
+argv[1] = <b>
+argv[2] = <a>
+argv[1] = <a:b>
+argv[1] = <a:b>
+argv[1] = <a>
+argv[2] = <b>
+argv[1] = <a>
+argv[2] = <b>
+argv[1] = <a>
+argv[2] = <b>
+argv[1] = <a>
+argv[2] = <b>
+argv[1] = < X >
+argv[1] = < X >
+argv[1] = < X >
+argv[1] = < X >
+argv[1] = <a>
+argv[2] = <b>
+argv[1] = <a>
+argv[2] = <b>
+argv[1] = <a>
+argv[2] = <b>
+argv[1] = <a>
+argv[2] = <b>
+argv[1] = < X >
+argv[1] = < X >
+argv[1] = < X >
+argv[1] = < X >
+argv[1] = <^?>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <^?>
+argv[1] = <^?>
+argv[1] = <^?>
+argv[1] = <^?>
+argv[1] = <>
+argv[1] = <>
+xa|xb|xc
+xa|xb|xc
+a|b|c
+a|b|c
+a b c
+a b c
+xa xb xc
+xa xb xc
+a|b
+b|c
+a b
+b c
+a|b|c
+a|b|c
+xa|xb|xc
+xa|xb|xc
+3
+3
+3
+3
+3
+3
+3
+3
+argv[1] = <echo 1 ; echo 1>
+argv[1] = <echo 1 2 ; echo 1>
+argv[2] = <2>
+argv[1] = <echo 1 ; echo 1>
+argv[1] = <echo 1 2 ; echo 1>
+argv[2] = <2>
+argv[1] = <AB>
+argv[1] = <AB>
+argv[1] = <A BC D>
+argv[1] = <A BC D>
+argv[1] = <A BC D>
+argv[1] = <A B>
+argv[2] = <C D>
+argv[1] = <A BC D>
+argv[1] = <A BC D>
+argv[1] = <fooq//barq/>
+argv[1] = <fooq>
+argv[2] = <>
+argv[3] = <barq>
+argv[4] = <>
+argv[1] = <foo!//bar!/>
+argv[1] = <foo!>
+argv[2] = <>
+argv[3] = <bar!>
+argv[4] = <>
+argv[1] = <ooq//arq/>
+argv[1] = <ooq>
+argv[2] = <>
+argv[3] = <arq>
+argv[4] = <>
+0
+bar
+
+after 1
+
+after 2
+0
+bar
+
+after 1
+
+after 2
+a b
+ab
+cd
+ok 1
+ok 2
+argv[1] = <a  b>
+argv[2] = <c  d>
+argv[1] = <a>
+argv[2] = <b>
+argv[3] = <c>
+argv[4] = <d>
+argv[1] = <a  b c  d>
+argv[1] = <a  b c  d>
+<1> <2> <3> <4> <5 1> 
+<1 1> <2> <3> <4> <5> 
+<11> <2> <3> <4> <51> 
+<1 1> <2> <3> <4> <5 1> 
+<11> <2> <3> <4> <51> 
+<1> <2> <3> <4> <51> 
+<11> <2> <3> <4> <5> 
+<1> <2> <3> <4> <51> 
+<11> <2> <3> <4> <5> 
+<1> <2> <3> <4> <5foo> 
+<1> <2> <3> <4> <51> 
+<1> <2> <3> <4> <5foo> 
+<1> <2> <3> <4> <51> 
+<11> <2> <3> <4> <5> 
+<1> <2> <3> <4> <51> 
+<11> <2> <3> <4> <5> 
+<1> <2> <3> <4> <5foo> 
+second set:
+<1 2> <3> <4> <5 1 2> 
+<1 2 1 2> <3> <4> <5> 
+<1 21 2> <3> <4> <51 2> 
+<1 2 1 2> <3> <4> <5 1 2> 
+<1> <21 2> <3> <4> <51> <2> 
+<1 2> <3> <4> <51> <2> 
+<1> <21 2> <3> <4> <5> 
+<1 2> <3> <4> <51 2> 
+<1 21 2> <3> <4> <5> 
+<1 2> <3> <4> <5foo> 
+<1> <2> <3> <4> <51> <2> 
+<1> <2> <3> <4> <5foo> 
+<1 2> <3> <4> <51 2> 
+<1 21 2> <3> <4> <5> 
+<1 2> <3> <4> <51 2> 
+<1 21 2> <3> <4> <5> 
+<1 2> <3> <4> <5foo> 
+third set:
+
+"${@:2}a3 a2" a$1    #works as long as $1 and 3 are swapped
+set y za3 a2 ax
+0
+declare -a a=([0]="y" [1]="za3 a2" [2]="ax")
+
+"${@:2}b$1 b2" b3    #fails!  why?
+set y zbx b2 b3
+0
+declare -a b=([0]="y" [1]="zbx b2" [2]="b3")
+
+${@:2}c$1 c2 c3     #works as long as quoting omitted
+set y zcx c2 c3
+0
+declare -a c=([0]="y" [1]="zcx" [2]="c2" [3]="c3")
+argv[1] = <>
+argv[2] = <x>
+argv[1] = <>
+argv[2] = <x>
+1
+argv[1] = <>
+argv[2] = <>
+argv[3] = <x>
+argv[1] = <>
+argv[2] = <x>
+argv[1] = <>
+argv[2] = <>
+argv[3] = <x>
+argv[1] = <>
+argv[2] = <x>
+argv[1] = <>
+argv[2] = <x>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <AwR>
+argv[1] = <AwR>
+argv[1] = <AR>
+argv[1] = <AwR>
+argv[1] = <AR>
+argv[1] = <AR>
+argv[1] = <AwR>
+argv[1] = <AwR>
+argv[1] = <A^?R>
+argv[1] = <AwR>
+argv[1] = <AwR>
+argv[1] = <A^?R>
+<a> <b> <ca> <b> <c-a-b-c> 
+after 1: IFS -
+argv[1] = <a-b-c>
+<a> <b> <c> <da> <b c> <d-a-b c-d> 
+after 2: IFS -
+argv[1] = <a-b c-d>
+argv[1] = <a>
+argv[2] = <b>
+argv[3] = <c>
+argv[4] = <d>
+argv[1] = <a b c d>
+argv[1] = <a>
+argv[2] = <b>
+argv[3] = <c>
+argv[4] = <d>
+argv[1] = <a b c d>
+<3>
+<abc>
+<def ghi>
+<jkl>
+<3>
+<abc>
+<def ghi>
+<jkl>
+<abc>
+<def ghi>
+<jkl>
+<abc>
+<def ghi>
+<jkl>
+<abcdef ghijkl>
+<abc>
+<def ghi>
+<jkl>
+<abc>
+<def ghi>
+<jkl>
+<abc:def ghi:jkl>
+<abc>
+<def>
+<ghi>
+<jkl>
+<abc>
+<def>
+<ghi>
+<jkl>
+argv[1] = <1>
+argv[2] = <>
+argv[1] = <2>
+argv[2] = <>
+argv[1] = <3>
+argv[2] = <>
+argv[1] = <4>
+argv[2] = <>
+-----
+argv[1] = <1>
+argv[2] = <>
+argv[1] = <2>
+argv[2] = <>
+argv[1] = <3>
+argv[1] = <4>
+argv[2] = <>
+------
+argv[1] = <1>
+argv[2] = <>
+argv[1] = <2>
+argv[2] = <>
+argv[1] = <3>
+argv[2] = <>
+argv[1] = <4>
+argv[2] = <>
+argv[1] = <5>
+argv[2] = <>
+argv[1] = <6>
+argv[2] = <>
+-----
+argv[1] = <1>
+argv[2] = <>
+argv[1] = <2>
+argv[2] = <>
+argv[1] = <3>
+argv[2] = <>
+argv[1] = <4>
+argv[2] = <>
+argv[1] = <5>
+argv[2] = <>
+argv[1] = <6>
+argv[2] = <>
+-----
+argv[1] = <1>
+argv[2] = <>
+argv[1] = <2>
+argv[2] = <>
+<12><12><12><12><12><12>
+<12><12><12><12><12><12>
+<12><'1''2'>
+1 2
+1 2
+1 2
+argv[1] = <1>
+argv[2] = <2>
+argv[1] = <1>
+argv[2] = <2>
+argv[1] = <1 2>
+argv[1] = <1 2>
+argv[1] = <1>
+argv[2] = <2>
+var=1 2
+argv[1] = <1>
+argv[2] = <2>
+var=1 2
+argv[1] = <1 2>
+argv[1] = <1 2>
diff --git a/tests/dstack.right b/tests/dstack.right
new file mode 100644
index 0000000..8f9d38c
--- /dev/null
+++ b/tests/dstack.right
@@ -0,0 +1,55 @@
+./dstack.tests: line 19: pushd: /tmp/xxx-notthere: No such file or directory
+./dstack.tests: line 22: pushd: no other directory
+./dstack.tests: line 23: popd: directory stack empty
+./dstack.tests: line 26: pushd: -m: invalid number
+pushd: usage: pushd [-n] [+N | -N | dir]
+./dstack.tests: line 27: popd: -m: invalid number
+popd: usage: popd [-n] [+N | -N]
+./dstack.tests: line 28: dirs: -m: invalid number
+dirs: usage: dirs [-clpv] [+N] [-N]
+./dstack.tests: line 29: dirs: 7: invalid option
+dirs: usage: dirs [-clpv] [+N] [-N]
+/
+ok
+/usr /
+/usr /
+/usr /
+/usr /
+/usr /
+/
+/usr /
+/etc /usr /
+/etc /usr /
+/etc /usr /
+ 0  /etc
+ 1  /usr
+ 2  /
+/usr /etc /
+/etc /usr /
+/tmp /etc /usr /
+/tmp
+/tmp
+/usr
+/usr
+./dstack.tests: line 71: dirs: 9: directory stack index out of range
+./dstack.tests: line 71: dirs: 9: directory stack index out of range
+./dstack.tests: line 72: pushd: +9: directory stack index out of range
+./dstack.tests: line 72: pushd: -9: directory stack index out of range
+./dstack.tests: line 73: popd: +9: directory stack index out of range
+./dstack.tests: line 73: popd: -9: directory stack index out of range
+/tmp /etc /
+/tmp /etc /
+/tmp /etc /
+/tmp /usr /etc /
+/tmp
+/tmp /usr /etc /
+/tmp /usr /etc /
+/tmp
+/tmp /bin /etc /
+/tmp
+/tmp /bin /
+/tmp
+/bin / /tmp
+/bin / /tmp
+/bin
+/bin
diff --git a/tests/dstack.tests b/tests/dstack.tests
new file mode 100644
index 0000000..116e935
--- /dev/null
+++ b/tests/dstack.tests
@@ -0,0 +1,100 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+export LC_ALL=C
+export LANG=C
+
+dirs -c
+# error -- non-existent directory
+pushd /tmp/xxx-notthere
+
+# errors -- empty stack
+pushd
+popd
+
+# errors -- bad numeric arguments -- should not cause the script to exit
+pushd -m
+popd -m
+dirs -m
+dirs 7
+
+MYDIR=$PWD
+unalias cd 2>/dev/null
+
+unalias -a
+
+command cd -P /
+command pwd -P	# better be `/'
+
+case "$OLDPWD" in
+$MYDIR)	echo ok ;;
+*)	echo oops -- bad \$OLDPWD ;;
+esac
+
+pushd /usr
+echo $PWD $OLDPWD
+dirs
+echo ${DIRSTACK[@]}
+
+# this should not change the directory stack at all
+pushd -n +0
+dirs
+
+popd
+pushd /usr
+
+pushd /etc
+dirs
+dirs -l
+dirs -v
+
+# two consecutive `pushd's should swap the top two stack elements, then
+# swap them back, leaving the stack intact
+pushd
+pushd
+
+pushd /tmp
+echo ${DIRSTACK[0]} ; dirs +0
+echo ${DIRSTACK[2]} ; dirs +2
+
+# these should be errors, but not affect the directory stack
+dirs +9; dirs -9
+pushd +9 ; pushd -9
+popd +9 ; popd -9
+
+popd -n +2
+dirs
+echo ${DIRSTACK[@]}
+
+pushd -n /usr
+echo $PWD
+dirs
+echo ${DIRSTACK[@]}
+
+builtin pwd
+
+DIRSTACK[1]=/bin
+dirs
+
+builtin pwd
+popd +2
+builtin pwd -L
+pushd -1
+dirs
+echo ${DIRSTACK[0]}
+
+dirs -c
+dirs
+
+# this is for the benefit of pure coverage
+cd "$MYDIR"
diff --git a/tests/dstack2.right b/tests/dstack2.right
new file mode 100644
index 0000000..d682a27
--- /dev/null
+++ b/tests/dstack2.right
@@ -0,0 +1,24 @@
+expect ~1
+~1
+/usr /
+/tmp /usr /
+/tmp /usr /
+these lines should be the same
+/tmp
+/tmp /tmp
+these lines should be the same
+/usr
+/usr /usr
+these lines should be the same
+/
+/ /
+these lines should be the same
+/tmp
+/tmp /tmp
+these lines should be the same
+/usr
+/usr /usr
+ 1  /usr
+these lines should be the same
+/
+/ /
diff --git a/tests/dstack2.tests b/tests/dstack2.tests
new file mode 100644
index 0000000..0873319
--- /dev/null
+++ b/tests/dstack2.tests
@@ -0,0 +1,49 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+wdir=$PWD
+cd /
+
+echo expect '~1'
+echo ~1
+
+pushd /usr
+pushd /tmp
+dirs
+
+echo these lines should be the same
+dirs +0
+echo ~0 ${DIRSTACK[0]}
+echo these lines should be the same
+dirs +1
+echo ~1 ${DIRSTACK[1]}
+echo these lines should be the same
+dirs +2
+echo ~2 ${DIRSTACK[2]}
+
+NDIRS=$(( ${#DIRSTACK[@]} - 1 ))
+
+echo these lines should be the same
+dirs -2
+echo ~-2 ${DIRSTACK[NDIRS-2]}
+
+echo these lines should be the same
+dirs -1
+echo ~-1 ${DIRSTACK[NDIRS-1]}
+dirs -v -1
+
+echo these lines should be the same
+dirs -0
+echo ~-0 ${DIRSTACK[NDIRS]}
+
+cd "$wdir"
diff --git a/tests/dynvar.right b/tests/dynvar.right
new file mode 100644
index 0000000..e1344c6
--- /dev/null
+++ b/tests/dynvar.right
@@ -0,0 +1,7 @@
+BASHPID ok
+BASH_ARGV0 ok
+BASH_ARGV0 ok
+SECONDS ok
+EPOCHSECONDS ok
+EPOCHREALTIME ok
+echo $BASH_COMMAND
diff --git a/tests/dynvar.tests b/tests/dynvar.tests
new file mode 100644
index 0000000..5aefab6
--- /dev/null
+++ b/tests/dynvar.tests
@@ -0,0 +1,90 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# specvar -- test some of the dynamic variables
+
+# BASHPID
+pid=$$
+bpid=$BASHPID
+subpid=$( (echo $BASHPID) )
+
+if [ "$bpid" -ne "$subpid" ]; then echo BASHPID ok; fi
+
+# BASH_ARGV0
+
+BASH_ARGV0=hello
+case $0 in
+hello)	echo BASH_ARGV0 ok ;;
+*)	echo "BASH_ARGV0 mismatch: $BASH_ARGV0 ($0)" >&2 ;;
+esac
+
+setarg0()
+{
+	BASH_ARGV0="$1"
+}
+
+setarg0 arg0
+case $0 in
+arg0)	echo BASH_ARGV0 ok ;;
+*)	echo "BASH_ARGV0 mismatch: $BASH_ARGV0 ($0)" >&2 ;;
+esac
+
+# SECONDS
+before=$SECONDS
+sleep 2
+after=$SECONDS
+
+if (( $after > $before )); then echo SECONDS ok; fi
+unset before after
+
+# EPOCHSECONDS
+
+# not exact, but should work
+# could also use python -c 'import time; ts = int(time.time()); print(ts)'
+now1=$(perl -e 'print time')
+now2=$EPOCHSECONDS
+
+case $now1 in
+$now2)	echo EPOCHSECONDS ok ;;
+*)	echo "current time via perl and EPOCHSECONDS possible mismatch|$now1|$now2" >&2 ;;
+esac
+unset now1 now2
+
+LC_ALL=C		# force decimal point to `.'
+now1=$EPOCHREALTIME
+now2=$EPOCHREALTIME
+sec1=${now1%%.*}
+sec2=${now2%%.*}
+
+msec1=${now1##*.}
+msec2=${now2##*.}
+# cut off leading zeros
+shopt -s extglob
+msec1=${msec1##*(0)}
+msec2=${msec2##*(0)}
+
+dsec=$(( $sec2 - $sec1 ))
+dmsec=$(( $msec2 - $msec1 ))
+if (( $dmsec < 0 )); then
+	dmsec=$(( dmsec + 1000000 ))
+	dsec=$(( desc - 1 ))
+fi
+
+# not a real test, but ok for a start
+if (( $dmsec < 1000000 )); then echo EPOCHREALTIME ok; fi
+
+${THIS_SH} -c 'echo $BASH_COMMAND'
+
+# FUNCNAME tested in func.tests
+# RANDOM tested in varenv.sh
+# LINENO tested in dbg-support
diff --git a/tests/errors.right b/tests/errors.right
new file mode 100644
index 0000000..be0c895
--- /dev/null
+++ b/tests/errors.right
@@ -0,0 +1,200 @@
+./errors.tests: line 30: alias: -x: invalid option
+alias: usage: alias [-p] [name[=value] ... ]
+./errors.tests: line 31: unalias: -x: invalid option
+unalias: usage: unalias [-a] name [name ...]
+./errors.tests: line 32: alias: hoowah: not found
+./errors.tests: line 33: unalias: hoowah: not found
+./errors.tests: line 36: `1': not a valid identifier
+declare -fr func
+./errors.tests: line 49: func: readonly function
+./errors.tests: line 52: unset: -x: invalid option
+unset: usage: unset [-f] [-v] [-n] [name ...]
+./errors.tests: line 55: unset: func: cannot unset: readonly function
+./errors.tests: line 58: declare: func: readonly function
+./errors.tests: line 62: unset: XPATH: cannot unset: readonly variable
+./errors.tests: line 68: unset: cannot simultaneously unset a function and a variable
+./errors.tests: line 71: declare: -z: invalid option
+declare: usage: declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]
+./errors.tests: line 73: declare: `-z': not a valid identifier
+./errors.tests: line 74: declare: `/bin/sh': not a valid identifier
+./errors.tests: line 78: declare: cannot use `-f' to make functions
+./errors.tests: line 81: exec: -i: invalid option
+exec: usage: exec [-cl] [-a name] [command [argument ...]] [redirection ...]
+./errors.tests: line 85: export: XPATH: not a function
+./errors.tests: line 88: break: only meaningful in a `for', `while', or `until' loop
+./errors.tests: line 89: continue: only meaningful in a `for', `while', or `until' loop
+./errors.tests: line 92: shift: label: numeric argument required
+./errors.tests: line 97: shift: too many arguments
+./errors.tests: line 103: let: expression expected
+./errors.tests: line 106: local: can only be used in a function
+./errors.tests: line 109: logout: not login shell: use `exit'
+./errors.tests: line 112: hash: notthere: not found
+./errors.tests: line 115: hash: -v: invalid option
+hash: usage: hash [-lr] [-p pathname] [-dt] [name ...]
+./errors.tests: line 119: hash: hashing disabled
+./errors.tests: line 122: export: `AA[4]': not a valid identifier
+./errors.tests: line 123: readonly: `AA[4]': not a valid identifier
+./errors.tests: line 126: unset: [-2]: bad array subscript
+./errors.tests: line 130: AA: readonly variable
+./errors.tests: line 134: AA: readonly variable
+./errors.tests: line 142: shift: 5: shift count out of range
+./errors.tests: line 143: shift: -2: shift count out of range
+./errors.tests: line 146: shopt: no_such_option: invalid shell option name
+./errors.tests: line 147: shopt: no_such_option: invalid shell option name
+./errors.tests: line 150: umask: 09: octal number out of range
+./errors.tests: line 151: umask: `:': invalid symbolic mode character
+./errors.tests: line 152: umask: `:': invalid symbolic mode operator
+./errors.tests: line 155: umask: -i: invalid option
+umask: usage: umask [-p] [-S] [mode]
+./errors.tests: line 159: umask: `u': invalid symbolic mode character
+./errors.tests: line 168: VAR: readonly variable
+./errors.tests: line 171: declare: VAR: readonly variable
+./errors.tests: line 172: declare: VAR: readonly variable
+./errors.tests: line 174: declare: unset: not found
+./errors.tests: line 177: VAR: readonly variable
+./errors.tests: command substitution: line 181: syntax error near unexpected token `)'
+./errors.tests: command substitution: line 181: ` for z in 1 2 3; do )'
+./errors.tests: command substitution: line 182: syntax error near unexpected token `done'
+./errors.tests: command substitution: line 182: ` for z in 1 2 3; done )'
+./errors.tests: line 184: cd: HOME not set
+./errors.tests: line 185: cd: /tmp/xyz.bash: No such file or directory
+./errors.tests: line 187: cd: OLDPWD not set
+./errors.tests: line 188: cd: /bin/sh: Not a directory
+./errors.tests: line 190: cd: /tmp/cd-notthere: No such file or directory
+./errors.tests: line 193: .: filename argument required
+.: usage: . filename [arguments]
+./errors.tests: line 194: source: filename argument required
+source: usage: source filename [arguments]
+./errors.tests: line 197: .: -i: invalid option
+.: usage: . filename [arguments]
+./errors.tests: line 200: set: -q: invalid option
+set: usage: set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]
+./errors.tests: line 203: enable: sh: not a shell builtin
+./errors.tests: line 203: enable: bash: not a shell builtin
+./errors.tests: line 206: shopt: cannot set and unset shell options simultaneously
+./errors.tests: line 209: read: var: invalid timeout specification
+./errors.tests: line 212: read: `/bin/sh': not a valid identifier
+./errors.tests: line 215: VAR: readonly variable
+./errors.tests: line 218: readonly: -x: invalid option
+readonly: usage: readonly [-aAf] [name[=value] ...] or readonly -p
+./errors.tests: line 221: eval: -i: invalid option
+eval: usage: eval [arg ...]
+./errors.tests: line 222: command: -i: invalid option
+command: usage: command [-pVv] command [arg ...]
+./errors.tests: line 225: /bin/sh + 0: syntax error: operand expected (error token is "/bin/sh + 0")
+./errors.tests: line 226: /bin/sh + 0: syntax error: operand expected (error token is "/bin/sh + 0")
+./errors.tests: line 229: trap: NOSIG: invalid signal specification
+./errors.tests: line 232: trap: -s: invalid option
+trap: usage: trap [-lp] [[arg] signal_spec ...]
+./errors.tests: line 238: return: can only `return' from a function or sourced script
+./errors.tests: line 242: break: 0: loop count out of range
+./errors.tests: line 246: continue: 0: loop count out of range
+./errors.tests: line 251: builtin: bash: not a shell builtin
+./errors.tests: line 255: bg: no job control
+./errors.tests: line 256: fg: no job control
+./errors.tests: line 259: kill: -s: option requires an argument
+./errors.tests: line 261: kill: S: invalid signal specification
+./errors.tests: line 263: kill: `': not a pid or valid job spec
+kill: usage: kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l [sigspec]
+./errors.tests: line 268: set: trackall: invalid option name
+./errors.tests: line 272: xx: readonly variable
+1
+./errors1.sub: line 14: .: -i: invalid option
+.: usage: . filename [arguments]
+./errors1.sub: line 22: shift: -4: shift count out of range
+./errors1.sub: line 27: break: -1: loop count out of range
+after f
+./errors2.sub: line 3: ${$NO_SUCH_VAR}: bad substitution
+1
+./errors3.sub: line 5: no_such_file: No such file or directory
+TEST
+./errors3.sub: line 7: no_such_file: No such file or directory
+1
+2
+./errors4.sub: line 20: var: readonly variable
+after readonly assignment
+./errors4.sub: line 26: break: x: numeric argument required
+1
+2
+./errors4.sub: line 20: var: readonly variable
+./errors5.sub: line 6: array: unbound variable
+./errors5.sub: line 7: array: unbound variable
+./errors5.sub: line 8: array[7]: unbound variable
+./errors5.sub: line 11: 7: unbound variable
+./errors5.sub: line 12: 7: unbound variable
+after 1: 1
+after 2: 1
+after 3: 1
+4
+array after 1: 0
+
+array after 2: 0
+./errors6.sub: line 1: uvar: parameter not set
+./errors6.sub: line 1: uvar: parameter null or not set
+
+./errors6.sub: line 1: uvar: parameter null or not set
+./errors6.sub: line 38: ${-3:-${-3}}: bad substitution
+./errors6.sub: line 39: ${-3}: bad substitution
+./errors6.sub: line 40: -3: invalid variable name
+after indir: 1
+./errors6.sub: line 43: -3: invalid variable name
+
+unset
+./errors6.sub: line 50: var: invalid indirect expansion
+./errors6.sub: line 51: var: invalid indirect expansion
+./errors6.sub: line 54: invalid-ident: invalid variable name
+./errors6.sub: line 55: invalid-ident: invalid variable name
+./errors6.sub: line 56: invalid-ident: invalid variable name
+4
+array after 1: 0
+
+array after 2: 0
+./errors6.sub: line 1: uvar: parameter not set
+./errors6.sub: line 1: uvar: parameter null or not set
+
+./errors6.sub: line 1: uvar: parameter null or not set
+./errors6.sub: line 38: ${-3:-${-3}}: bad substitution
+./errors6.sub: line 39: ${-3}: bad substitution
+./errors6.sub: line 40: -3: invalid variable name
+after indir: 1
+./errors6.sub: line 43: -3: invalid variable name
+
+unset
+./errors6.sub: line 50: var: invalid indirect expansion
+./errors6.sub: line 51: var: invalid indirect expansion
+./errors6.sub: line 54: invalid-ident: invalid variable name
+./errors6.sub: line 55: invalid-ident: invalid variable name
+./errors6.sub: line 56: invalid-ident: invalid variable name
+./errors7.sub: line 21: x: readonly variable
+./errors7.sub: line 21: notthere: command not found
+after no such command: 127
+./errors7.sub: line 23: x: readonly variable
+echo builtin
+after non-special builtin: 0
+./errors7.sub: line 25: x: readonly variable
+after special builtin: 0
+./errors7.sub: line 27: x: readonly variable
+./errors7.sub: line 21: x: readonly variable
+./errors7.sub: line 21: notthere: command not found
+after no such command: 127
+./errors7.sub: line 23: x: readonly variable
+echo builtin
+after non-special builtin: 0
+./errors7.sub: line 25: x: readonly variable
+./errors7.sub: line 27: x: readonly variable
+./errors8.sub: eval: line 7: syntax error: unexpected end of file
+ok 1
+./errors8.sub: line 8: v: readonly variable
+ok 2
+./errors8.sub: line 9: v: readonly variable
+ok 3
+./errors8.sub: line 11: shift: 12: shift count out of range
+ok 4
+./errors8.sub: line 13: return: can only `return' from a function or sourced script
+ok 5
+./errors8.sub: line 14: set: notanoption: invalid option name
+ok 6
+bash: line 1: return: can only `return' from a function or sourced script
+after return
+bash: line 1: return: can only `return' from a function or sourced script
+./errors.tests: line 299: `!!': not a valid identifier
diff --git a/tests/errors.tests b/tests/errors.tests
new file mode 100644
index 0000000..531b625
--- /dev/null
+++ b/tests/errors.tests
@@ -0,0 +1,302 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# These should all be safe
+LC_ALL=C
+LC_CTYPE=C
+LC_COLLATE=C
+LC_MESSAGES=C
+
+# these tests should all generate errors
+
+# make sure we don't exit prematurely
+set +e
+set +o posix
+
+# various alias/unalias errors
+
+# at some point, this may mean to `export' an alias, like ksh, but
+# for now it is an error
+alias -x foo=barz
+unalias -x fooaha
+alias hoowah
+unalias hoowah
+
+# the iteration variable must be a valid identifier
+for 1 in a b c; do echo $1; done
+
+# try to rebind a read-only function
+func()
+{
+	echo func
+}
+readonly -f func
+# make sure `readonly' and `declare' play well together
+declare -Fr
+func()
+{
+	echo bar
+}
+
+# bad option
+unset -x func
+
+# cannot unset readonly functions or variables
+unset -f func
+# or make them not readonly
+declare -fr func
+declare -f +r func
+
+XPATH=$PATH
+declare -r XPATH
+unset -v XPATH
+
+# cannot unset invalid identifiers
+unset /bin/sh
+
+# cannot unset function and variable at the same time
+unset -f -v SHELL
+
+# bad option
+declare -z
+# cannot declare invalid identifiers
+declare -- -z 
+declare /bin/sh
+
+# this is the syntax used to export functions in the environment, but
+# it cannot be used with `declare'
+declare -f func='() { echo "this is func"; }'
+
+# bad option to exec -- this should not exit the script
+exec -i /bin/sh
+
+# try to export -f something that is not a function -- this should be
+# an error, not create an `invisible function'
+export -f XPATH
+
+# this depends on the setting of BREAK_COMPLAINS in config.h.in
+break
+continue
+
+# this should not exit the shell; it did in versions before 2.01
+shift label
+
+# other shells do not complain about the extra arguments; maybe someday
+# we won't either
+set -- a b c
+shift $# label
+# and get rid of the positional parameters
+shift $#
+
+# let without an expression is an error, though maybe it should just return
+# success
+let
+
+# local outside a function is an error
+local
+
+# logout of a non-login shell is an error
+logout
+
+# try to hash a non-existent command
+hash notthere
+
+# bad option to hash, although it may mean `verbose' at some future point
+hash -v
+
+# turn off hashing, then try to hash something
+set +o hashall
+hash -p ${THIS_SH} ${THIS_SH##*/}
+
+# bad identifiers to declare/readonly/export
+export AA[4]
+readonly AA[4]
+
+declare -a AA
+unset AA[-2]
+
+# try to assign to a readonly array
+declare -r AA
+AA=( one two three )
+
+# make sure `readonly -n' doesn't turn off readonly status
+readonly -n AA
+AA=(one two three)
+
+# try to assign a readonly array with bad assignment syntax
+# NOTE: this works in post-bash-2.05 (at least when I write this)
+# readonly -a ZZZ=bbb
+
+# bad counts to `shift'
+shopt -s shift_verbose
+shift $(( $# + 5 ))
+shift -2
+
+# bad shell options
+shopt -s no_such_option
+shopt no_such_option
+
+# non-octal digits for umask and other errors
+umask 09
+umask -S u=rwx:g=rwx:o=rx >/dev/null # 002
+umask -S u:rwx,g:rwx,o:rx >/dev/null # 002
+
+# at some point, this may mean `invert', but for now it is an error
+umask -i
+
+# bad assignments shouldn't change the umask
+mask=$(umask)
+umask g=u
+mask2=$(umask)
+if [ "$mask" != "$mask2" ]; then
+	echo "umask errors change process umask"
+fi
+
+# assignment to a readonly variable in environment
+VAR=4
+readonly VAR
+VAR=7 :
+
+# more readonly variable tests
+declare VAR=88
+declare +r VAR
+
+declare -p unset
+
+# iteration variable in a for statement being readonly
+for VAR in 1 2 3 ; do echo $VAR; done
+
+# parser errors
+: $( for z in 1 2 3; do )
+: $( for z in 1 2 3; done )
+
+# various `cd' errors
+( unset HOME ; cd )
+( HOME=/tmp/xyz.bash ; cd )
+# errors from cd
+cd -
+cd /bin/sh	# error - not a directory
+OLDPWD=/tmp/cd-notthere
+cd -
+
+# various `source/.' errors
+.
+source
+
+# maybe someday this will work like in rc
+. -i /dev/tty
+
+# make sure that this gives an error rather than setting $1
+set -q
+
+# enable non-builtins
+enable sh bash
+
+# try to set and unset shell options simultaneously
+shopt -s -u checkhash
+
+# this is an error -- bad timeout spec
+read -t var < /dev/null
+
+# try to read into an invalid identifier
+read /bin/sh < /dev/null
+
+# try to read into a readonly variable
+read VAR < /dev/null
+
+# bad option to readonly/export
+readonly -x foo
+
+# someday these may mean something, but for now they're errors
+eval -i "echo $-"
+command -i "echo $-"
+
+# this caused a core dump in bash-2.01 (fixed in bash-2.01.1)
+eval echo \$[/bin/sh + 0]
+eval echo '$((/bin/sh + 0))'
+
+# error to list trap for an unknown signal
+trap -p NOSIG
+
+# maybe someday trap will take a -s argument like kill, but not now
+trap -p -s NOSIG
+
+# we have a ksh-like ERR trap, post-bash-2.05
+#trap 'echo [$LINENO] -- error' ERR
+
+# can only return from a function or sourced script
+return 2
+
+# break and continue with arguments <= 0
+for z in 1 2 3; do
+	break 0
+	echo $x
+done
+for z in 1 2 3; do
+	continue 0
+	echo $x
+done
+
+# builtin with non-builtin
+builtin bash
+
+# maybe someday you will be able to use fg/bg when job control is not really
+# active, but for now they are errors
+bg
+fg
+
+# argument required
+kill -s
+# bad argument
+kill -S
+# null argument
+kill -INT ''
+# argument required
+kill -INT
+
+# bad shell option names
+set -o trackall		# bash is not ksh
+
+# problem with versions through bash-4.2
+readonly xx=5
+echo $((xx=5))
+echo $?
+
+${THIS_SH} ./errors1.sub
+${THIS_SH} ./errors2.sub
+${THIS_SH} ./errors3.sub
+${THIS_SH} ./errors4.sub
+${THIS_SH} -o posix ./errors4.sub
+
+${THIS_SH} ./errors5.sub
+
+${THIS_SH} ./errors6.sub
+THIS_SH="${THIS_SH} -o posix" ${THIS_SH} ./errors6.sub
+
+${THIS_SH} ./errors7.sub
+${THIS_SH} -o posix ./errors7.sub
+
+${THIS_SH} ./errors8.sub
+
+${THIS_SH} -c 'return ; echo after return' bash
+${THIS_SH} -o posix -c 'return ; echo after return' bash
+
+# this must be last!
+# in posix mode, a function name must be a valid identifier
+# this can't go in posix2.tests, since it causes the shell to exit
+# immediately
+set -o posix
+function !! () { fc -s "$@" ; }
+set +o posix
+
+echo end
diff --git a/tests/errors1.sub b/tests/errors1.sub
new file mode 100644
index 0000000..52a9e34
--- /dev/null
+++ b/tests/errors1.sub
@@ -0,0 +1,40 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+. -i /dev/tty
+
+f()
+{
+	return -1
+}
+
+set -- a b c
+shift -4
+
+f
+
+for f in 1 2 3; do
+	break -1
+done
+
+
+f()
+{
+	return -25
+}
+
+f
+echo after f
+exit -25
+
+exit -56
diff --git a/tests/errors2.sub b/tests/errors2.sub
new file mode 100644
index 0000000..79ef333
--- /dev/null
+++ b/tests/errors2.sub
@@ -0,0 +1,3 @@
+set -e
+trap 'echo $?' EXIT
+echo ${$NO_SUCH_VAR}    # Bad substitution expected here
diff --git a/tests/errors3.sub b/tests/errors3.sub
new file mode 100644
index 0000000..b2ae3d7
--- /dev/null
+++ b/tests/errors3.sub
@@ -0,0 +1,7 @@
+# redirection errors with special builtins should exit the shell when in
+# Posix mode, not otherwise; being on the LHS of || or && should not make
+# a difference
+
+exec 9<no_such_file || echo TEST
+set -o posix
+exec 9<no_such_file || echo TEST
diff --git a/tests/errors4.sub b/tests/errors4.sub
new file mode 100644
index 0000000..6b40502
--- /dev/null
+++ b/tests/errors4.sub
@@ -0,0 +1,31 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# test effect of assigning to readonly vars on loops and non-interactive shells
+# fatal error when in posix mode
+var=foo
+readonly var
+for num in 1 2 3 4 5; do
+	if [ $num -eq 3 ]; then
+		var=bar
+	fi
+	echo $num
+done 
+echo after readonly assignment
+
+# non-numeric arguments to break are fatal errors for all non-interactive shells
+for f in 1 2 3 4 5
+do
+	break x
+done
+echo after loop
diff --git a/tests/errors5.sub b/tests/errors5.sub
new file mode 100644
index 0000000..112b2a1
--- /dev/null
+++ b/tests/errors5.sub
@@ -0,0 +1,12 @@
+array[1]=one
+array[2]=two
+
+set -u
+
+( echo ${#array} )
+( echo ${array} )
+( echo ${array[7]} )
+
+set -- 1 2 3
+( echo ${#7} )
+( echo ${7} )
diff --git a/tests/errors6.sub b/tests/errors6.sub
new file mode 100644
index 0000000..cac2c55
--- /dev/null
+++ b/tests/errors6.sub
@@ -0,0 +1,56 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# problems with non-fatal expansion errors through bash-4.3
+: ${THIS_SH:=./bash}
+
+${THIS_SH} -c 'echo ${x!y} second
+echo after 1: $?' 2>/dev/null
+
+${THIS_SH} -c 'echo ${#+} second
+echo after 2: $?' 2>/dev/null
+
+${THIS_SH} -c 'echo ${#foo%} second
+echo after 3: $?' 2>/dev/null
+
+${THIS_SH} -c 'b[0]=4 ; echo ${b[   ]}
+echo array after 1: $?'  2>/dev/null
+${THIS_SH} -c 'typeset -A v ; v["0"]=one ; echo ${v[   ]}
+echo array after 2: $?'  2>/dev/null
+
+${THIS_SH} -c 'echo ${uvar?}' ./errors6.sub
+${THIS_SH} -c 'echo ${uvar:?}' ./errors6.sub
+export uvar=
+${THIS_SH} -c 'echo ${uvar?}' ./errors6.sub
+${THIS_SH} -c 'echo ${uvar:?}' ./errors6.sub
+unset uvar
+
+echo "${-3:-${-3}}"
+echo ${-3}
+x=-3; echo ${!x}
+echo after indir: $?
+
+function ivar() { echo -n "${!1:-${1}}"; }
+ivar -3
+
+foo=bar
+echo ${!foo}
+echo ${!foo:-unset}
+
+echo ${!var:-unset}
+echo ${!var+unset}
+
+foo=invalid-ident
+echo ${!foo}
+echo ${!foo:-unset}
+echo ${!foo+unset}
diff --git a/tests/errors7.sub b/tests/errors7.sub
new file mode 100644
index 0000000..add8782
--- /dev/null
+++ b/tests/errors7.sub
@@ -0,0 +1,28 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+: ${THIS_SH:=./bash}
+readonly x=4
+
+# in posix mode, these are all variable assignment errors, so strict conformance
+# implies that we exit after any of them. ksh93 doesn't do that. we more-or-less
+# emulate the ksh93 behavior
+
+x=8 notthere
+echo after no such command: $?
+x=8 echo echo builtin
+echo after non-special builtin: $?
+( x=8 : nosuchdir
+echo after special builtin: $? )
+( x=8 $nocmd 
+echo after assignment error: $? )
diff --git a/tests/errors8.sub b/tests/errors8.sub
new file mode 100644
index 0000000..b65e1ab
--- /dev/null
+++ b/tests/errors8.sub
@@ -0,0 +1,14 @@
+# the start of a set of tests for command keeping special builtins from
+# exiting the shell on failure
+set -o posix
+readonly v
+
+command eval '( ' || echo ok 1
+
+command export v=foo || echo ok 2
+command readonly v=foo || echo ok 3
+
+command shift 12 || echo ok 4
+
+command return 16 || echo ok 5
+command set -o notanoption || echo ok 6
diff --git a/tests/exec.right b/tests/exec.right
new file mode 100644
index 0000000..0a249dd
--- /dev/null
+++ b/tests/exec.right
@@ -0,0 +1,135 @@
+before exec1.sub: one two three
+calling exec1.sub
+aa bb cc dd ee
+after exec1.sub with args: 0
+
+after exec1.sub without args: 0
+after exec1.sub: one two three
+./execscript: line 21: notthere: command not found
+127
+/tmp/bash: notthere: No such file or directory
+127
+/bin/sh: /bin/sh: cannot execute binary file
+126
+./execscript: line 40: /: Is a directory
+126
+/: /: Is a directory
+126
+./execscript: line 47: .: /: is a directory
+1
+126
+0
+this is bashenv
+./exec3.sub: line 3: /tmp/bash-notthere: No such file or directory
+127
+./execscript: line 71: notthere: No such file or directory
+127
+./execscript: line 74: notthere: No such file or directory
+127
+./execscript: line 77: notthere: command not found
+127
+this is sh
+this is sh
+unset
+ok
+5
+./exec5.sub: line 4: exec: bash-notthere: not found
+127
+this is ohio-state
+0
+1
+1
+0
+42
+42
+0
+1
+1
+0
+0
+1
+0
+1
+testb
+expand_aliases 	on
+1
+1
+1
+1
+0
+0
+0
+0
+/usr/local/bin:/usr/GNU/bin:/usr/bin:/bin:.
+cannot find cat in $TMPDIR
+cannot find cat with empty $PATH
+PATH = /usr/local/bin:/usr/GNU/bin:/usr/bin:/bin:.
+cannot find cat in $TMPDIR with hash
+cannot find cat with empty $PATH with hash
+PATH = /usr/local/bin:/usr/GNU/bin:/usr/bin:/bin:.
+trap -- 'echo foo $BASH_SUBSHELL' EXIT
+trap -- 'echo USR1 $BASHPID' SIGUSR1
+between
+trap -- 'echo foo $BASH_SUBSHELL' EXIT
+trap -- 'echo USR1 $BASHPID' SIGUSR1
+between 2
+trap -- 'echo foo $BASH_SUBSHELL' EXIT
+trap -- 'echo USR1 $BASHPID' SIGUSR1
+in subshell: 1
+in subshell pipeline: 1
+group pipeline: 1
+EXIT-group.1
+foo 0
+after
+exit code: 1
+exit code: 1
+exit code: 1
+exit code: 1
+exit code: 1
+exit code: 1
+a
+b
+c
+A
+B
+c
+d
+c
+d
+e
+x1
+x1a
+x2
+x2a
+x2b
+x3
+x3a
+x3b
+WORKS
+done
+WORKS
+WORKS
+a
+b
+c
+d
+a
+b
+c
+d
+e
+A
+B
+c
+d
+c
+d
+e
+x
+y
+z
+WORKS
+w
+x
+y
+z
diff --git a/tests/exec1.sub b/tests/exec1.sub
new file mode 100755
index 0000000..4a12501
--- /dev/null
+++ b/tests/exec1.sub
@@ -0,0 +1 @@
+echo "$@"
diff --git a/tests/exec10.sub b/tests/exec10.sub
new file mode 100644
index 0000000..db6a671
--- /dev/null
+++ b/tests/exec10.sub
@@ -0,0 +1,47 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# post bash-4.3 changes to how command -p works (avoid modifying $PATH)
+
+: ${TMPDIR=/tmp}
+xpath=/usr/local/bin:/usr/GNU/bin:/usr/bin:/bin:.
+
+# set a value of PATH we can test for; versions of bash up to and including
+# bash-4.3 would set $PATH while running command -p
+PATH=$xpath
+export PATH
+command -p sh -c 'echo $PATH'
+
+PATH=${TMPDIR}
+command -pv cat	>/dev/null || echo "cannot find cat using standard path"
+command -p cat < /dev/null
+#hash
+
+PATH=$xpath
+command -pv cat >/dev/null || echo "cannot find cat using xpath"
+PATH=$TMPDIR command -pv cat >/dev/null || echo "cannot find cat using standard path with PATH=\$TMPDIR"
+PATH= command -pv cat >/dev/null || echo "cannot find cat using standard path with empty \$PATH"
+PATH=$TMPDIR command -v cat >/dev/null || echo "cannot find cat in \$TMPDIR"
+PATH= command -v cat >/dev/null || echo "cannot find cat with empty \$PATH"
+
+echo PATH = $PATH
+hash cat
+
+PATH=$xpath
+
+PATH=$TMPDIR command -pv cat >/dev/null || echo "cannot find cat using stdpath with hash"
+PATH= command -pv cat >/dev/null || echo "cannot find cat using stdpath with hash"
+PATH=$TMPDIR command -v cat >/dev/null || echo "cannot find cat in \$TMPDIR with hash"
+PATH= command -v cat >/dev/null || echo "cannot find cat with empty \$PATH with hash"
+
+echo PATH = $PATH
diff --git a/tests/exec11.sub b/tests/exec11.sub
new file mode 100644
index 0000000..9631c67
--- /dev/null
+++ b/tests/exec11.sub
@@ -0,0 +1,14 @@
+trap 'echo USR1 $BASHPID' USR1
+trap 'echo foo $BASH_SUBSHELL' 0
+
+trap | cat
+echo between
+( trap )
+echo between 2
+{ trap; } | cat
+
+( echo in subshell: $BASH_SUBSHELL )
+( echo in subshell pipeline: $BASH_SUBSHELL ) | cat
+
+{ echo group pipeline: $BASH_SUBSHELL;
+  trap 'echo EXIT-group.$BASH_SUBSHELL' EXIT; } | cat
diff --git a/tests/exec12.sub b/tests/exec12.sub
new file mode 100644
index 0000000..0d7c8b8
--- /dev/null
+++ b/tests/exec12.sub
@@ -0,0 +1,32 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+: ${TMPDIR:=/var/tmp}
+TMPFILE=$TMPDIR/exitcode
+trap 'rm -f $TMPFILE' 0
+
+rm -f $TMPFILE
+set -e
+# we normalize the exit code to accommodate false returning 255 on Solaris
+exit_handler() { echo "exit code: $(( $? != 0 ))" ; touch $TMPFILE; }
+false() { ! :; }
+notfound() { nosuchcommand ; }
+syntaxerror() { !:; }
+
+main()
+{(
+    trap exit_handler 0
+    "$@" >> /dev/null 2>&1
+)}
+main "$@"
+echo "after main: should not get here"
diff --git a/tests/exec13.sub b/tests/exec13.sub
new file mode 100644
index 0000000..76e1324
--- /dev/null
+++ b/tests/exec13.sub
@@ -0,0 +1,34 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+echo x1 | ( cat & wait )
+echo x1a | ( :& cat & wait )
+
+echo x2 | for f in 1; do
+	cat & wait
+done
+echo x2a | if true; then cat & wait; fi
+echo x2b | for (( i=0; i < 1; i++ )) ; do cat & wait; done
+
+echo x3 | { cat & wait; }
+
+lambda() { cat & wait; }
+echo x3a | lambda
+
+: ${TMPDIR:=/tmp}
+SRCF=$TMPDIR/bash-src-$$
+cat > $SRCF << \EOF
+cat & wait
+EOF
+echo x3b | . $SRCF
+rm -f $SRCF
diff --git a/tests/exec14.sub b/tests/exec14.sub
new file mode 100644
index 0000000..3402fb9
--- /dev/null
+++ b/tests/exec14.sub
@@ -0,0 +1,47 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+# test that optimizing command lists doesn't inappropriately short-cut commands
+
+# also includes optimizing last command in a list separated by `;'
+
+if [ -x /bin/echo ] ; then
+	binecho=/bin/echo
+elif [ -x /usr/bin/echo ]; then
+	binecho=/usr/bin/echo
+else
+	enable -n echo
+	binecho=echo
+fi
+
+export binecho
+
+: ${THIS_SH:=./bash} ${TMPDIR:=/var/tmp}
+
+${THIS_SH} -c 'trap "echo WORKS && rm $TMPDIR/x$$" EXIT && touch $TMPDIR/x$$' 
+${THIS_SH} -c 'trap "echo WORKS && rm $TMPDIR/x$$" EXIT && touch $TMPDIR/x$$ ; $binecho done' 
+
+( trap "echo WORKS && rm $TMPDIR/x$$" EXIT && touch $TMPDIR/x$$ )
+
+${THIS_SH} -c 'echo a && { $binecho b && $binecho c ; } && echo d'
+${THIS_SH} -c 'echo a && { $binecho b && $binecho c ; } && echo d ; $binecho e'
+
+${THIS_SH} -c 'echo A && $binecho B'
+${THIS_SH} -c '$binecho c && echo d'
+
+$THIS_SH -c '$binecho c && $binecho d && echo e'
+
+$THIS_SH -c 'trap "echo WORKS" EXIT ; $binecho x ; $binecho y ; $binecho z'
+
+${THIS_SH} -c 'echo w ; { echo x ; $binecho y; }; $binecho z'
diff --git a/tests/exec2.sub b/tests/exec2.sub
new file mode 100644
index 0000000..c1caaea
--- /dev/null
+++ b/tests/exec2.sub
@@ -0,0 +1,5 @@
+# make sure an exit command in an exit trap sets the shell's exit status
+trap - 0
+trap 'exit 5' 0
+
+exit 0
diff --git a/tests/exec3.sub b/tests/exec3.sub
new file mode 100644
index 0000000..4f2f8e2
--- /dev/null
+++ b/tests/exec3.sub
@@ -0,0 +1,6 @@
+shopt -s execfail
+
+exec /tmp/bash-notthere
+# make sure we're still around
+echo $?
+
diff --git a/tests/exec4.sub b/tests/exec4.sub
new file mode 100644
index 0000000..a60d8b3
--- /dev/null
+++ b/tests/exec4.sub
@@ -0,0 +1,8 @@
+# let's test out the noexec code
+set -n
+
+fail
+whoops
+wow
+
+set +n
diff --git a/tests/exec5.sub b/tests/exec5.sub
new file mode 100644
index 0000000..1462f9e
--- /dev/null
+++ b/tests/exec5.sub
@@ -0,0 +1,9 @@
+# try exec'ing a command that cannot be found in $PATH
+shopt -s execfail
+
+exec bash-notthere
+# make sure we're still around
+echo $?
+
+# now we need to go away, but this should echo 'this is ohio-state'
+exec -a ohio-state ${THIS_SH} -c 'echo this is $0'
diff --git a/tests/exec6.sub b/tests/exec6.sub
new file mode 100644
index 0000000..dd53e74
--- /dev/null
+++ b/tests/exec6.sub
@@ -0,0 +1,67 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# builtins with exit status inverted
+
+( true )
+echo $?
+( ! true )
+echo $?
+
+( false )
+echo $?
+( ! false )
+echo $?
+
+# inverting shouldn't affect exit
+(exit 42)
+echo $?
+
+( ! exit 42 )
+echo $?
+
+# commands requiring an exec with exit status inverted -- broken in bash-2.04
+
+( ls > /dev/null 2>&1 )
+echo $?
+( ! ls > /dev/null 2>&1 )
+echo $?
+
+touch /tmp/notwrite
+chmod 400 /tmp/notwrite
+
+# make sure redirection failures in commands whose exit status is inverted
+# are handled correctly
+
+( ls > /tmp/notwrite ) 2>/dev/null
+echo $?
+
+( ! ls > /tmp/notwrite ) 2>/dev/null
+echo $?
+
+# now add exit traps, true and false for commands with and without exit
+# status inversion
+
+(trap 'false' 0 ; ! ls > /tmp/notwrite ) 2>/dev/null
+echo $?
+
+(trap 'false' 0 ; ls > /tmp/notwrite ) 2>/dev/null
+echo $?
+
+(trap 'true' 0 ; ! ls > /tmp/notwrite ) 2>/dev/null
+echo $?
+
+(trap 'true' 0 ; ls > /tmp/notwrite ) 2>/dev/null
+echo $?
+
+rm -f /tmp/notwrite
diff --git a/tests/exec7.sub b/tests/exec7.sub
new file mode 100644
index 0000000..0c8c7ca
--- /dev/null
+++ b/tests/exec7.sub
@@ -0,0 +1,36 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# make sure that bash really checks the right things when deciding what
+# constitutes an executable file
+
+[ $UID -eq 0 ] && { echo "exec7.sub: the test suite should not be run as root" >&2 ; }
+
+: ${TMPDIR:=/tmp}
+
+cd $TMPDIR || { echo "cannot cd to $TMPDIR" >&2 ; exit 2; }
+
+mkdir testa testb
+
+echo 'echo "testa"' > testa/foo
+echo 'echo "testb"' > testb/foo
+
+chmod 655 testa/foo
+chmod 755 testb/foo
+
+PATH=$TMPDIR/testa:$TMPDIR/testb $THIS_SH -c foo
+
+rm -rf testa testb
+
+cd $OLDPWD
+exit 0
diff --git a/tests/exec8.sub b/tests/exec8.sub
new file mode 100644
index 0000000..014726d
--- /dev/null
+++ b/tests/exec8.sub
@@ -0,0 +1 @@
+shopt expand_aliases
diff --git a/tests/exec9.sub b/tests/exec9.sub
new file mode 100644
index 0000000..a47dfd0
--- /dev/null
+++ b/tests/exec9.sub
@@ -0,0 +1,33 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# make sure commands before the last one in the pipeline can't change $?
+false
+false | echo $?
+false
+(false) | echo $?
+
+false
+true | echo $?
+false
+(true) | echo $?
+
+true
+false | echo $?
+true
+(false) | echo $?
+
+true
+true | echo $?
+true
+(true) | echo $?
diff --git a/tests/execscript b/tests/execscript
new file mode 100644
index 0000000..2809676
--- /dev/null
+++ b/tests/execscript
@@ -0,0 +1,160 @@
+export LC_ALL=C
+export LANG=C
+
+if [ $UID -eq 0 ]; then
+        echo "execscript: the test suite should not be run as root" >&2
+fi
+
+set -- one two three
+echo before exec1.sub: "$@"
+echo calling exec1.sub
+./exec1.sub aa bb cc dd ee
+echo after exec1.sub with args: $?
+./exec1.sub
+echo after exec1.sub without args: $?
+echo after exec1.sub: "$@"
+
+# set up a fixed path so we know notthere will not be found
+PATH=/usr/bin:/bin:/usr/local/bin:
+export PATH
+
+notthere
+echo $?
+
+# this is iffy, since the error messages may vary from system to system
+# and /tmp might not exist
+ln -s ${THIS_SH} /tmp/bash 2>/dev/null
+if [ -f /tmp/bash ]; then
+	/tmp/bash notthere
+else
+	${THIS_SH} notthere
+fi
+echo $?
+rm -f /tmp/bash
+
+# /bin/sh should be there on all systems
+${THIS_SH} /bin/sh
+echo $?
+
+# try executing a directory
+/
+echo $?
+
+${THIS_SH} /
+echo $?
+
+# try sourcing a directory
+. /
+echo $?
+
+# try sourcing a binary file -- post-2.04 versions don't do the binary file
+# check, and will probably fail with `command not found', or status 127
+# bash-4.1 and later check for 256 NUL characters and fail as binary files
+# if there are more than that, it's probably binary
+. ${THIS_SH} 2>/dev/null
+echo $?
+
+# post-bash-2.05 versions allow sourcing non-regular files
+. /dev/null
+echo $?
+
+# kill two birds with one test -- test out the BASH_ENV code
+echo echo this is bashenv > $TMPDIR/bashenv
+export BASH_ENV=$TMPDIR/bashenv
+${THIS_SH} ./exec3.sub
+rm -f $TMPDIR/bashenv
+unset BASH_ENV
+
+# we're resetting the $PATH to empty, so this should be last
+PATH=
+
+notthere
+echo $?
+
+command notthere
+echo $?
+
+command -p notthere
+echo $?
+
+# but -p should guarantee that we find all the standard utilities, even
+# with an empty or unset $PATH
+command -p sh -c 'echo this is $0'
+unset PATH
+command -p sh -c 'echo this is $0'
+
+# a bug in bash before bash-2.01 caused PATH to be set to the empty string
+# when command -p was run with PATH unset
+echo ${PATH-unset}
+
+echo "echo ok" | ${THIS_SH} -t
+
+${THIS_SH} ./exec2.sub
+echo $?
+
+${THIS_SH} ./exec4.sub
+
+# try exec'ing a command that cannot be found in $PATH
+${THIS_SH} ./exec5.sub
+
+# this was a bug in bash versions before bash-2.04
+${THIS_SH} -c 'cat </dev/null | cat >/dev/null' >&-
+
+# checks for proper return values in subshell commands with inverted return
+# values
+
+${THIS_SH} ./exec6.sub
+
+# checks for properly deciding what constitutes an executable file
+${THIS_SH} ./exec7.sub
+
+${THIS_SH} -i ${PWD}/exec8.sub
+
+${THIS_SH} ./exec9.sub
+
+${THIS_SH} ./exec10.sub
+${THIS_SH} ./exec11.sub
+
+true | `echo true` &
+
+echo after
+
+# Problem with bash at least back to version 3.0
+${THIS_SH} -c 'VAR=0; VAR=1 command exec; exit ${VAR}'
+
+# problem with bash through bash-4.1
+(
+        exec /var/empty/nosuch
+        echo bad
+) 2>/dev/null
+[ $? = 127 ] || echo FAIL: bad exit status $? at $LINENO
+
+unset FALSE
+if [ -x /bin/false ]; then
+	FALSE=/bin/false
+elif [ -x /usr/bin/false ]; then
+	FALSE=/usr/bin/false
+else
+	FALSE='command false'
+fi
+
+# problem with undoing redirections before running exit trap through bash-4.3
+
+${THIS_SH} ./exec12.sub false	# function
+${THIS_SH} ./exec12.sub command false
+${THIS_SH} ./exec12.sub $FALSE
+
+${THIS_SH} ./exec12.sub notfound
+${THIS_SH} ./exec12.sub syntaxerror
+${THIS_SH} ./exec12.sub nosuchcommand
+
+# problem with fork optimization in bash-4.4-alpha
+
+$THIS_SH -c 'echo a && /bin/echo b && echo c'
+$THIS_SH -c 'echo A && /bin/echo B'
+
+$THIS_SH -c '/bin/echo c && echo d'
+$THIS_SH -c '/bin/echo c && /bin/echo d && echo e'
+
+${THIS_SH} ./exec13.sub
+${THIS_SH} ./exec14.sub
diff --git a/tests/exp.right b/tests/exp.right
new file mode 100644
index 0000000..4e88ca9
--- /dev/null
+++ b/tests/exp.right
@@ -0,0 +1,410 @@
+argv[1] = <^A>
+argv[1] = <^A>
+argv[1] = <^?>
+argv[1] = <^?>
+argv[1] = <^A>
+argv[1] = <^?>
+argv[1] = <bar>
+argv[1] = <^A>
+argv[1] = <^?>
+argv[1] = <^A>
+argv[1] = <^?>
+argv[1] = <abcdefgh>
+argv[1] = <abcdefgh>
+argv[1] = <abcdefgh>
+argv[1] = <abcdefgh>
+argv[1] = <abcd>
+argv[1] = <abcd>
+argv[1] = < >
+argv[1] = <-->
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <abc>
+argv[1] = <abc>
+argv[1] = <abc>
+argv[1] = <abc>
+argv[1] = <abcdef>
+argv[1] = <abcdef>
+argv[1] = <^A>
+argv[1] = <^?>
+argv[1] = <^A>
+argv[1] = <^?>
+argv[1] = <^A>
+argv[1] = <^?>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <Hello world!>
+argv[1] = <`>
+argv[1] = <">
+argv[1] = <\^A>
+argv[1] = <\$>
+argv[1] = <\\>
+argv[1] = <a>
+argv[2] = <b>
+argv[1] = <^A>
+argv[2] = <^?>
+argv[1] = <**>
+argv[1] = <\.\./*/>
+argv[1] = <^A^?^A^?>
+argv[1] = <^A^A>
+argv[1] = <^A^?>
+argv[1] = <^A^A^?>
+argv[1] = <  abc>
+argv[2] = <def>
+argv[3] = <ghi>
+argv[4] = <jkl  >
+argv[1] = <  abc>
+argv[2] = <def>
+argv[3] = <ghi>
+argv[4] = <jkl  >
+argv[1] = <--abc>
+argv[2] = <def>
+argv[3] = <ghi>
+argv[4] = <jkl-->
+argv[1] = <a b>
+argv[2] = <cd>
+argv[3] = <ef>
+argv[4] = <gh>
+argv[1] = <a b>
+argv[2] = <cd>
+argv[3] = <ef>
+argv[4] = <gh>
+argv[1] = <a b>
+argv[2] = <cd>
+argv[3] = <ef>
+argv[4] = <gh>
+argv[1] = <  >
+argv[1] = < - >
+argv[1] = </^root:/{s/^[^:]*:[^:]*:\([^:]*\).*$/\1/>
+argv[1] = <foo bar>
+argv[1] = <foo>
+argv[2] = <bar>
+argv[1] = <abc>
+argv[1] = <abc>
+argv[1] = <posix>
+argv[1] = <10>
+argv[1] = <file.o>
+argv[1] = <posix>
+argv[1] = </src/cmd>
+argv[1] = <three>
+argv[1] = <abcdef>
+argv[1] = <abcdef>
+argv[1] = <abcdef>
+argv[1] = <abcdef>
+argv[1] = <\$x>
+argv[1] = <$x>
+argv[1] = <\$x>
+argv[1] = <abc>
+argv[2] = <def>
+argv[3] = <ghi>
+argv[4] = <jkl>
+argv[1] = <abc def ghi jkl>
+argv[1] = <abc:def ghi:jkl>
+argv[1] = <abc>
+argv[2] = <def ghi>
+argv[3] = <jkl>
+argv[1] = <xxabc>
+argv[2] = <def ghi>
+argv[3] = <jklyy>
+argv[1] = <abc>
+argv[2] = <def ghi>
+argv[3] = <jklabc>
+argv[4] = <def ghi>
+argv[5] = <jkl>
+argv[1] = <abcdef>
+argv[1] = <bar>
+argv[2] = <>
+argv[3] = <xyz>
+argv[4] = <>
+argv[5] = <abc>
+argv[1] = <$foo>
+argv[1] = <10>
+argv[1] = <newline expected>
+argv[1] = <got it>
+argv[1] = <got it>
+argv[1] = <one>
+argv[2] = <three>
+argv[3] = <five>
+argv[1] = <5>
+argv[2] = <5>
+argv[1] = <3>
+argv[1] = <1>
+argv[1] = <1>
+argv[1] = <5>
+argv[1] = <5>
+argv[1] = <5>
+argv[1] = <5>
+argv[1] = <42>
+argv[1] = <26>
+argv[1] = <\>
+argv[1] = <~>
+argv[1] = <a>
+argv[2] = <b>
+argv[3] = <c>
+argv[4] = <d>
+argv[5] = <e>
+a?b?c
+a b c
+argv[1] = <a>
+argv[2] = <b>
+argv[3] = <>
+argv[1] = <^?>
+argv[1] = <^?>
+argv[1] = <^?>
+argv[1] = <^?>
+argv[1] = <^?>
+argv[1] = <^?>
+argv[1] = <^A>
+argv[2] = <^?>
+argv[1] = <^A^?>
+argv[1] = <^A^?^A^?>
+argv[1] = <^A^A^?>
+0.net
+0.net0
+
+0.net
+0.net
+0.net
+graph
+yes
+a
+a
+ val
+val
+ val
+no arg passed
+hello
+[0;31m\]
+]
+[hello
+\[\e[0;31m\]
+
+hello
+eo
+argv[1] = <a>
+argv[1] = <a>
+argv[1] = <^?>
+argv[1] = <^?b>
+argv[1] = <b^?>
+argv[1] = <c>
+argv[1] = <c>
+argv[1] = <c>
+argv[1] = <c>
+argv[1] = <c>
+argv[1] = <c>
+argv[1] = <correct>
+argv[2] = <>
+argv[1] = <correct>
+argv[2] = <>
+argv[1] = <correct>
+argv[2] = <>
+argv[1] = <XwrongX>
+argv[2] = <>
+argv[1] = <correct>
+argv[2] = <a>
+argv[1] = <XwrongX>
+argv[2] = <a>
+argv[1] = <correct>
+argv[2] = <a>
+argv[1] = <correct>
+argv[2] = <a>
+argv[1] = <^A>
+argv[1] = <3>
+argv[2] = <^C>
+argv[3] = <^C>
+argv[4] = <^C>
+argv[1] = <^A>
+argv[1] = <XY>
+argv[2] = <YX>
+argv[1] = <XY^AYX>
+argv[1] = <XY>
+argv[2] = <Y>
+argv[1] = <XY^AY>
+argv[1] = <x^Ay^?z>
+argv[1] = <x^Ay^?z>
+declare -- var="x
yz"
+argv[1] = <declare>
+argv[2] = <-->
+argv[3] = <var="x^Ay^?z">
+declare -- var="x\001y\177z"$
+argv[1] = <$'x\001y\177z'>
+argv[1] = <x^Ay^?z>
+var=$'x\001y\177z'
+./exp8.sub: line 29: xyz: syntax error: invalid arithmetic operator (error token is "z")
+declare -a array=()
+declare -a array=([0]=$'x\001y\177z')
+argv[1] = <x^Ay^?z>
+declare -a array=([0]=$'x\001y\177z')
+declare -A array=([$'x\001y\177z']=$'a\242b\002c' )
+abc
+def
+ghi
+jkl
+abc def ghi jkl
+xxabc
+def
+ghi
+jklyy
+xxabc def ghi jklyy
+abc
+def
+ghi
+jkl
+abc
+def ghi
+jkl
+abc
+def ghi
+jkl
+abc
+def ghi
+jkl
+xxabc
+def
+ghi
+jklyy
+xxabc
+def ghi
+jklyy
+abc
+def
+ghi
+jklabc
+def
+ghi
+jkl
+abc
+def ghi
+jklabc
+def ghi
+jkl
+abc:def ghi:jkl
+abc:def ghi:jkl
+abc:def ghi:jkl
+abc
+def ghi
+jkl
+abc:def ghi:jkl
+abc:def ghi:jkl
+abc
+def ghi
+jkl
+var=abc:def ghi:jkl
+abc:def ghi:jkl
+var=abc:def ghi:jkl
+abcdef ghijkl
+abcdef ghijkl
+abcdef ghijkl
+abc
+def ghi
+jkl
+abcdef ghijkl
+abcdef ghijkl
+abcdef ghijkl
+var=abcdef ghijkl
+abcdef ghijkl
+var=abcdef ghijkl
+abc
+def ghi
+jkl
+abc def ghi jkl
+abc def ghi jkl
+abc def ghi jkl
+abc
+def
+ghi
+jkl
+abc def ghi jkl
+abc def ghi jkl
+abc
+def
+ghi
+jkl
+var=abc def ghi jkl
+abc def ghi jkl
+var=abc def ghi jkl
+abc
+def ghi
+jkl
+[foo]
+[]
+[foo]
+[]
+[foo]
+[foo]
+[foo]
+[]
+[foo]
+[]
+[foo]
+[]
+< A >< B >< A >< B >
+< A >< B >< A >< B >
+< A >< B >< a >< b >
+< A >< B >< A >< B >
+< A >< B ><' A '><' B '>
+-----
+< A >< B >< A >< B >
+< A >< B >< A >< B >
+< A >< B >< a >< b >
+< A >< B >< A >< B >
+< A >< B ><' A '><' B '>
+argv[1] = <1>
+argv[2] = <2>
+argv[1] = <1>
+argv[2] = <2>
+argv[1] = <1>
+argv[2] = <2>
+argv[1] = <1 2>
+argv[1] = <a b>
+argv[1] = <a>
+argv[2] = <b>
+argv[1] = <a b>
+argv[1] = <1>
+argv[2] = <2>
+argv[1] = <1>
+argv[2] = <2>
+argv[1] = <1>
+argv[2] = <2>
+argv[1] = <12>
+argv[1] = <12>
+argv[1] = <1>
+argv[2] = <2>
+argv[1] = <1>
+argv[2] = <2>
+argv[1] = < >
+argv[1] = < >
+argv[1] = < >
+argv[1] = < >
+argv[1] = < >
+argv[1] = <12>
+argv[1] = <12>
+argv[1] = <12>
+argv[1] = <12>
+ok 1
+ok 2
+ok 3
+ok 4
+ok 5
+ok 6
+ok 7
+ok 8
+ok 9
+argv[1] = <file.o>
+argv[1] = <posix>
+argv[1] = </src/cmd>
+argv[1] = <three>
+argv[1] = </one/two/three>
+abcdefg
+abcdefg
+abcdefg
+abcdefg
+cdefg
+abcdefg
+abcde
+abcdefg
diff --git a/tests/exp.tests b/tests/exp.tests
new file mode 100644
index 0000000..3e69db4
--- /dev/null
+++ b/tests/exp.tests
@@ -0,0 +1,425 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+#
+# A suite of tests for bash word expansions
+#
+# This tests parameter and variable expansion, with an empahsis on
+# proper quoting behavior.
+#
+# Chet Ramey
+
+#
+# If you comment out the body of this function, you can do a diff against
+# `expansion-tests.right' to see if the shell is behaving correctly
+#
+expect()
+{
+	echo expect "$@"
+}
+
+# Test the substitution quoting characters (CTLESC and CTLNUL) in different
+# combinations
+
+expect "<^A>"
+recho `echo '
'`
+expect "<^A>"
+recho `echo "
"`
+expect "<^?>"
+recho `echo ''`
+expect "<^?>"
+recho `echo ""`
+expect "<^A>"
+recho `echo 
`
+expect "<^?>"
+recho `echo `
+
+expect "bar"
+recho ${foo:-"`echo bar`"}
+expect "<^A>"
+recho ${foo:-"`echo 
`"}
+expect "<^?>"
+recho ${foo:-"`echo `"}
+
+expect "<^A>"
+recho "`echo 
`"
+expect "<^?>"
+recho "`echo `"
+
+# Test null strings without variable expansion
+expect "<abcdefgh>"
+recho abcd""efgh
+expect "<abcdefgh>"
+recho abcd''efgh
+expect "<abcdefgh>"
+recho ""abcdefgh
+expect "<abcdefgh>"
+recho ''abcdefgh
+expect "<abcd>"
+recho abcd""
+expect "<abcd>"
+recho abcd''
+
+# Test the quirky behavior of $@ in ""
+expect nothing
+recho "$@"
+expect "< >"
+recho " $@"
+expect "<-->"
+recho "-${@}-"
+
+# Test null strings with variable expansion that fails
+expect '<>'
+recho $xxx""
+expect '<>'
+recho ""$xxx
+expect '<>'
+recho $xxx''
+expect '<>'
+recho ''$xxx
+expect '<>'
+recho $xxx""$yyy
+expect '<>'
+recho $xxx''$yyy
+
+# Test null strings with variable expansion that succeeds
+xxx=abc
+yyy=def
+
+expect '<abc>'
+recho $xxx""
+expect '<abc>'
+recho ""$xxx
+expect '<abc>'
+recho $xxx''
+expect '<abc>'
+recho ''$xxx
+expect '<abcdef>'
+recho $xxx""$yyy
+expect '<abcdef>'
+recho $xxx''$yyy
+
+unset xxx yyy
+
+# Test the unquoted special quoting characters
+expect "<^A>"
+recho 

+expect "<^?>"
+recho 
+expect "<^A>"
+recho "
"
+expect "<^?>"
+recho ""
+expect "<^A>"
+recho '
'
+expect "<^?>"
+recho ''
+
+# Test expansion of a variable that is unset
+expect nothing
+recho $xxx
+expect '<>'
+recho "$xxx"
+
+expect nothing
+recho "$xxx${@}"
+
+# Test empty string expansion
+expect '<>'
+recho ""
+expect '<>'
+recho ''
+
+# Test command substitution with (disabled) history substitution
+expect '<Hello World!>'
+# set +H
+recho "`echo \"Hello world!\"`"
+
+# Test some shell special characters
+expect '<`>'
+recho "\`"
+expect '<">'
+recho "\""
+expect '<\^A>'
+recho "\
"
+
+expect '<\$>'
+recho "\\$"
+
+expect '<\\>'
+recho "\\\\"
+
+# This should give argv[1] = a argv[2] = b
+expect '<a> <b>'
+FOO=`echo 'a b' | tr ' ' '\012'`
+recho $FOO
+
+# This should give argv[1] = ^A argv[2] = ^?
+expect '<^A> <^?>'
+FOO=`echo '
 ' | tr ' ' '\012'`
+recho $FOO
+
+# Test quoted and unquoted globbing characters
+expect '<**>'
+recho "*"*
+
+expect '<\.\./*/>'
+recho "\.\./*/"
+
+# Test patterns that come up when the shell quotes funny character
+# combinations
+expect '<^A^?^A^?>'
+recho '

'
+expect '<^A^A>'
+recho '

'
+expect '<^A^?>'
+recho '
'
+expect '<^A^A^?>'
+recho '

'
+
+# More tests of "$@"
+set abc def ghi jkl
+expect '<  abc> <def> <ghi> <jkl  >'
+recho "  $@  "
+expect '<  abc> <def> <ghi> <jkl  >'
+recho "${1+  $@  }"
+
+set abc def ghi jkl
+expect '<--abc> <def> <ghi> <jkl-->'
+recho "--$@--"
+
+set "a b" cd ef gh
+expect '<a b> <cd> <ef> <gh>'
+recho ${1+"$@"}
+expect '<a b> <cd> <ef> <gh>'
+recho ${foo:-"$@"}
+expect '<a b> <cd> <ef> <gh>'
+recho "${@}"
+
+expect '<  >'
+recho "  "
+expect '< - >'
+recho " - "
+
+# Test combinations of different types of quoting in a fully-quoted string
+# (so the WHOLLY_QUOTED tests fail and it doesn't get set)
+expect '</^root:/{s/^[^:]*:[^:]*:\([^:]*\).*$/\1/>'
+recho "/^root:/{s/^[^:]*:[^:]*:\([^:]*\).*"'$'"/\1/"
+
+# Test the various Posix parameter expansions
+
+expect '<foo bar>'
+recho "${x:-$(echo "foo bar")}"
+expect '<foo> <bar>'
+recho ${x:-$(echo "foo bar")}
+
+unset X
+expect '<abc>'
+recho ${X:=abc}
+expect '<abc>'
+recho $X
+
+set a b c
+expect '<posix>'
+recho ${3:+posix}
+
+POSIX=/usr/posix
+expect '<10>'
+recho ${#POSIX}
+
+# remove shortest trailing match
+x=file.c
+expect '<file.o>'
+recho ${x%.c}.o
+
+# remove longest trailing match
+x=posix/src/std
+expect '<posix>'
+recho ${x%%/*}
+
+# remove shortest leading pattern
+x=$HOME/src/cmd
+expect '</src/cmd>'
+recho ${x#$HOME}
+
+# remove longest leading pattern
+x=/one/two/three
+expect '<three>'
+recho ${x##*/}
+
+# pattern removal of patterns that don't match
+z=abcdef
+
+expect '<abcdef>'
+recho ${z#xyz}
+expect '<abcdef>'
+recho ${z##xyz}
+
+expect '<abcdef>'
+recho ${z%xyz}
+expect '<abcdef>'
+recho ${z%%xyz}
+
+# Command substitution and the quirky differences between `` and $()
+
+expect '<\$x>'
+recho '\$x'
+
+expect '<$x>'
+recho `echo '\$x'`
+
+expect '<\$x>'
+recho $(echo '\$x')
+
+# The difference between $* "$*" and "$@"
+
+set "abc" "def ghi" "jkl"
+
+expect '<abc> <def> <ghi> <jkl>'
+recho $*
+
+expect '<abc def ghi jkl>'
+recho "$*"
+
+OIFS="$IFS"
+IFS=":$IFS"
+
+# The special behavior of "$*", using the first character of $IFS as separator
+expect '<abc:def ghi:jkl>'
+recho "$*"
+
+IFS="$OIFS"
+
+expect '<abc> <def ghi> <jkl>'
+recho "$@"
+
+expect '<xxabc> <def ghi> <jklyy>'
+recho "xx$@yy"
+
+expect '<abc> <def ghi> <jklabc> <def ghi> <jkl>'
+recho "$@$@"
+
+foo=abc
+bar=def
+
+expect '<abcdef>'
+recho "$foo""$bar"
+
+unset foo
+set $foo bar '' xyz "$foo" abc
+
+expect '<bar> <> <xyz> <> <abc>'
+recho "$@"
+
+# More tests of quoting and deferred evaluation
+
+foo=10 x=foo
+y='$'$x
+expect '<$foo>'
+recho $y
+eval y='$'$x
+expect '<10>'
+recho $y
+
+# case statements
+
+NL='
+'
+x='ab
+cd'
+
+expect '<newline expected>'
+case "$x" in
+*$NL*)	recho "newline expected" ;;
+esac
+
+expect '<got it>'
+case \? in
+*"?"*) recho "got it" ;;
+esac
+
+expect '<got it>'
+case \? in
+*\?*) recho "got it" ;;
+esac
+
+set one two three four five
+expect '<one> <three> <five>'
+recho $1 $3 ${5} $8 ${9}
+
+# length tests on positional parameters and some special parameters
+
+expect '<5> <5>'
+recho $# ${#}
+expect '<3>'
+recho ${#1}
+expect '<1>'
+recho ${##}
+expect '<1>'
+recho ${#?}
+expect '<5>'
+recho ${#@}
+expect '<5>'
+recho ${#*}
+expect '<5>'
+recho "${#@}"
+expect '<5>'
+recho "${#*}"
+
+expect '<42>'
+recho $((28 + 14))
+expect '<26>'
+recho $[ 13 * 2 ]
+
+expect '<\>'
+recho `echo \\\\`
+
+expect '<~>'
+recho '~'
+
+expect nothing
+recho $!
+expect nothing
+recho ${!}
+
+# test word splitting of assignment statements not preceding a command
+a="a b c d e"
+declare b=$a
+expect '<a> <b> <c> <d> <e>'
+recho $b
+
+a="a?b?c"
+
+echo ${a//\\?/ }
+
+echo ${a//\?/ }
+
+${THIS_SH} -c 'var=a:b: ; IFS=" :" ; recho $var""' bash
+
+${THIS_SH} ./exp1.sub
+
+${THIS_SH} ./exp2.sub
+
+${THIS_SH} ./exp3.sub
+
+${THIS_SH} ./exp4.sub
+
+${THIS_SH} ./exp5.sub
+
+${THIS_SH} ./exp6.sub
+${THIS_SH} ./exp7.sub
+${THIS_SH} ./exp8.sub
+${THIS_SH} ./exp9.sub
+${THIS_SH} ./exp10.sub
+${THIS_SH} ./exp11.sub
+${THIS_SH} ./exp12.sub
diff --git a/tests/exp1.sub b/tests/exp1.sub
new file mode 100644
index 0000000..3dbe3d9
--- /dev/null
+++ b/tests/exp1.sub
@@ -0,0 +1,34 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# Test the substitution quoting characters (CTLESC and CTLNUL) in different
+# combinations
+
+recho `echo ''`
+recho `echo ""`
+recho `echo `
+
+# Test the unquoted special quoting characters
+recho 
+recho ""
+recho ''
+
+# This should give argv[1] = ^A argv[2] = ^?
+FOO=`echo '
 ' | tr ' ' '\012'`
+recho $FOO
+
+# Test patterns that come up when the shell quotes funny character
+# combinations
+recho '
'
+recho '

'
+recho '

'
diff --git a/tests/exp10.sub b/tests/exp10.sub
new file mode 100644
index 0000000..42bdaf8
--- /dev/null
+++ b/tests/exp10.sub
@@ -0,0 +1,39 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+set -- ' A ' ' B '
+IFS=
+
+printf '<%s>' ${*} ${*##}
+echo
+printf '<%s>' ${*} ${*/}
+echo
+printf '<%s>' ${*} ${*,,}
+echo
+printf '<%s>' ${*} ${*:1:2}
+echo
+printf '<%s>' ${*} ${*@Q}
+echo
+
+echo -----
+
+printf '<%s>' ${@} ${@##}
+echo
+printf '<%s>' ${@} ${@/}
+echo
+printf '<%s>' ${@} ${@,,}
+echo
+printf '<%s>' ${@} ${@:1:2}
+echo
+printf '<%s>' ${@} ${@@Q}
+echo
diff --git a/tests/exp11.sub b/tests/exp11.sub
new file mode 100644
index 0000000..b3e02e0
--- /dev/null
+++ b/tests/exp11.sub
@@ -0,0 +1,105 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+set -- '1 2'
+
+unset var
+recho ${var-${*:1}}
+
+unset var
+recho ${var=$*}
+
+unset var
+recho ${var=${*:1}}
+recho "$var"
+
+# posix interp 221
+unset var
+recho ${var:-a\ b}
+
+recho ${var:=a\ b}
+recho "$var"
+
+set -- 1 2
+IFS=
+
+unset a b c
+recho $*
+recho ${a-$*}
+recho ${b-${*/}}
+recho ${c=${*/}}
+recho "$c"
+recho ${b-${*,,}}
+recho ${d-${*,,}}
+
+unset -v a b c
+IFS=$' \t\n'
+
+set -- ' '
+A=(' ')
+
+IFS=
+unset var
+var=${*@E}
+recho "$var"
+
+unset var
+var=${A[*]@E}
+recho "$var"
+
+unset var
+var=${@@E}
+recho "$var"
+
+unset var
+var=${A[@]@E}
+recho "$var"
+
+unset novar
+recho ${novar-${A[*]@E}}
+
+unset -v var novar
+IFS=$' \t\n'
+
+set -- 1 2
+A=( 1 2 )
+IFS=
+
+a=$* 
+recho "$a"
+b=${*@E}
+recho "$b"
+
+unset a b
+a=${A[*]}
+recho "$a"
+b=${A[*]@E}
+recho "$b"
+
+set -- $'\t'
+A=$1
+
+IFS=$1
+[[ ${A[@]} ]] && echo ok 1
+[[ ${A[*]} ]] && echo ok 2
+[[ ${A[0]} ]] && echo ok 3
+
+IFS=$' \t\n'
+[[ ${A[@]} ]] && echo ok 4
+[[ ${A[*]} ]] && echo ok 5
+[[ ${A[0]} ]] && echo ok 6
+
+IFS=
+[[ ${A[@]} ]] && echo ok 7
+[[ ${A[*]} ]] && echo ok 8
+[[ ${A[0]} ]] && echo ok 9
diff --git a/tests/exp12.sub b/tests/exp12.sub
new file mode 100644
index 0000000..8c5005d
--- /dev/null
+++ b/tests/exp12.sub
@@ -0,0 +1,51 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# force single-byte versions of these functions
+
+export LANG=C
+
+# remove shortest trailing match
+x=file.c
+recho ${x%.c}.o
+
+# remove longest trailing match
+x=posix/src/std
+recho ${x%%/*}
+
+# remove shortest leading pattern
+x=$HOME/src/cmd
+recho ${x#$HOME}
+
+# remove longest leading pattern
+x=/one/two/three
+recho ${x##*/}
+
+# and no match thrown in for good measure
+recho ${x#nomatch}
+
+foo=abcdefg
+
+# fail
+echo ${foo%ab}
+echo ${foo%def}
+
+echo ${foo#fg}
+echo ${foo#def}
+
+# succeed
+echo ${foo#ab}
+echo ${foo#def}
+
+echo ${foo%fg}
+echo ${foo%def}
diff --git a/tests/exp2.sub b/tests/exp2.sub
new file mode 100644
index 0000000..a70179e
--- /dev/null
+++ b/tests/exp2.sub
@@ -0,0 +1,12 @@
+K=dvb0.net A=${K#dvb} eval echo \$A
+unset K A
+x=${K:=dvb0.net0} A=${K#dvb} eval echo \$A
+
+unset K A
+K=dvb0.net A=${K#dvb} echo "$A"
+unset K A
+K=dvb0.net A=${K#dvb} ; echo "$A"
+unset K A
+K=dvb0.net A=${K#dvb} eval echo '$A'
+unset K A
+K=dvb0.net A=${K#dvb} eval echo \$A
diff --git a/tests/exp3.sub b/tests/exp3.sub
new file mode 100644
index 0000000..212d579
--- /dev/null
+++ b/tests/exp3.sub
@@ -0,0 +1,7 @@
+IFS=:
+
+case A in ([[:graph:]]) echo graph;; *) echo non-graph;; esac
+[[ A == [[:graph:]] ]] && echo yes || echo no
+
+IFS="~"; read a b <<< a~q; echo $a
+IFS=':'; read a b <<< a:q; echo $a
diff --git a/tests/exp4.sub b/tests/exp4.sub
new file mode 100644
index 0000000..d022ceb
--- /dev/null
+++ b/tests/exp4.sub
@@ -0,0 +1,10 @@
+f=" val" e=
+echo "$e"$f
+echo $e$f
+echo "$e""$f"
+
+if [[ "$1"x == x ]] ; then
+   echo "no arg passed"
+   exit 1
+fi
+echo "$1"x | cat -v
diff --git a/tests/exp5.sub b/tests/exp5.sub
new file mode 100644
index 0000000..5cf8ed7
--- /dev/null
+++ b/tests/exp5.sub
@@ -0,0 +1,34 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# expansions involving patterns
+var='[hello'
+echo "${var//[/}"
+
+red='\[\e[0;31m\]'
+printf "%s\n" "${red//\\[\\e/}"
+
+foo="${red//\\[\\e/}"
+
+# foo == [0;31m\]
+printf "%s\n" "${foo//[0;31m\\/}"
+
+echo "${var//[]/}"
+echo "${red//[]/}"
+
+v=hello
+foo='[:alpha:]'
+
+echo ${v//[[:alpha:]]/}
+echo ${v//[[:alpha]]/}
+echo ${v//[[:alpha]/}
diff --git a/tests/exp6.sub b/tests/exp6.sub
new file mode 100644
index 0000000..582617c
--- /dev/null
+++ b/tests/exp6.sub
@@ -0,0 +1,43 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+recho """"a
+recho a""""
+
+recho """"
+
+recho """"b
+recho b""""
+
+recho """"""c
+recho c""""""
+
+recho """"""c""""
+recho """"c""""""
+
+recho """"""""c
+recho c""""""""
+
+# BASH BUG: spurious DEL characters appear on empty variable interpolation.
+# BASH 4.2.8(1)-release
+
+a=''
+
+recho correct "$a" # correct empty output line
+recho correct "$a""$a" # correct empty output line
+recho correct "$a""$a""$a" # correct empty output line
+recho XwrongX "$a""$a""$a""$a" # spurious two DEL chars appear at line end
+recho correct a"$a" # correct single "a" on line
+recho XwrongX a"$a""$a" # spurious DEL char appears at line end
+recho correct a"$a$a" # correct single "a" on line
+recho correct a"$a$a$a$a" # correct single "a" on line
diff --git a/tests/exp7.sub b/tests/exp7.sub
new file mode 100644
index 0000000..a3993b5
--- /dev/null
+++ b/tests/exp7.sub
@@ -0,0 +1,36 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+IFS=$'\001'
+c=$'\001'
+c2=$'\003'
+
+IFS=$c		# this is the problem line, IFS should end up being \001
+recho "$IFS"
+set -- $c2$c$c2$c$c2
+recho $# "$1" "$2" "$3"
+
+x=$c
+recho "$x"
+
+unset c c2 x
+
+c=$'Y\1Y';
+
+v=X${c}X;
+recho X${c}X
+recho "$v"
+
+v=X$c
+recho X$c
+recho "$v"
diff --git a/tests/exp8.sub b/tests/exp8.sub
new file mode 100644
index 0000000..4c2870c
--- /dev/null
+++ b/tests/exp8.sub
@@ -0,0 +1,44 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+var=$'x\001y\177z'
+
+recho "$var"
+recho $var
+
+declare -p var
+recho $(declare -p var)
+
+declare -p var | sed -n l
+
+recho ${var@Q}
+recho ${var@P}
+echo -E ${var@A}
+
+unset array
+array=( [$'x\001y\177z']=foo )	# should be error
+echo -E ${array[@]@A}
+
+unset array
+declare -a array=([0]=$'x\001y\177z')
+declare -p array
+
+unset array
+array=( "$var" )
+recho ${array[@]}
+echo -E ${array[@]@A}
+
+unset array
+declare -A array
+array=( [$'x\001y\177z']=$'a\242b\002c' )
+echo -E ${array[@]@A}
diff --git a/tests/exp9.sub b/tests/exp9.sub
new file mode 100644
index 0000000..7e4a3b6
--- /dev/null
+++ b/tests/exp9.sub
@@ -0,0 +1,82 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# expansion test cases from Posix interp 888
+
+set "abc" "def ghi" "jkl"
+unset novar
+IFS=' ' # a space
+printf '%s\n' $*
+printf '%s\n' "$*"
+printf '%s\n' xx$*yy
+printf '%s\n' "xx$*yy"
+printf '%s\n' $@
+printf '%s\n' "$@"
+printf '%s\n' ${1+"$@"}
+printf '%s\n' ${novar-"$@"}
+printf '%s\n' xx$@yy
+printf '%s\n' "xx$@yy"
+printf '%s\n' $@$@
+printf '%s\n' "$@$@"
+IFS=':'
+printf '%s\n' "$*"
+var=$*; printf '%s\n' "$var"
+var="$*"; printf '%s\n' "$var"
+unset var
+printf '%s\n' ${var-$*}
+printf '%s\n' "${var-$*}"
+printf '%s\n' ${var-"$*"}
+printf '%s\n' ${var=$*}
+printf 'var=%s\n' "$var"
+unset var
+printf '%s\n' "${var=$*}"
+printf 'var=%s\n' "$var"
+
+IFS='' # null
+printf '%s\n' "$*"
+var=$*; printf '%s\n' "$var"
+var="$*"; printf '%s\n' "$var"
+unset var
+printf '%s\n' ${var-$*}
+printf '%s\n' "${var-$*}"
+printf '%s\n' ${var-"$*"}
+printf '%s\n' ${var=$*}
+printf 'var=%s\n' "$var"
+unset var
+printf '%s\n' "${var=$*}"
+printf 'var=%s\n' "$var"
+printf '%s\n' "$@"
+
+unset IFS
+printf '%s\n' "$*"
+var=$*; printf '%s\n' "$var"
+var="$*"; printf '%s\n' "$var"
+unset var
+printf '%s\n' ${var-$*}
+printf '%s\n' "${var-$*}"
+printf '%s\n' ${var-"$*"}
+printf '%s\n' ${var=$*}
+printf 'var=%s\n' "$var"
+unset var
+printf '%s\n' "${var=$*}"
+printf 'var=%s\n' "$var"
+printf '%s\n' "$@"
+
+set --
+printf '[%s]\n' foo "$*"
+printf '[%s]\n' foo "$novar$*$(echo)"
+printf '[%s]\n' foo $@
+printf '[%s]\n' foo "$@"
+printf '[%s]\n' foo ''$@
+printf '[%s]\n' foo ''"$@"
+printf '[%s]\n' foo ''"$novar$@$(echo)"
diff --git a/tests/exportfunc.right b/tests/exportfunc.right
new file mode 100644
index 0000000..ff7fc8d
--- /dev/null
+++ b/tests/exportfunc.right
@@ -0,0 +1,14 @@
+exportfunc ok 1
+exportfunc ok 2
+./exportfunc.tests: line 37: cve7169-bad: No such file or directory
+./exportfunc.tests: eval: line 44: syntax error: unexpected end of file
+./exportfunc.tests: line 43: cve7169-bad2: No such file or directory
+./exportfunc1.sub: line 14: maximum here-document count exceeded
+./exportfunc.tests: line 64: HELLO_WORLD: No such file or directory
+eval ok
+./exportfunc3.sub: line 23: export: foo=bar: cannot export
+status: 1
+equals-1
+bad echo
+./exportfunc3.sub: line 36: export: /bin/echo: cannot export
+bar
diff --git a/tests/exportfunc.tests b/tests/exportfunc.tests
new file mode 100644
index 0000000..b2742d2
--- /dev/null
+++ b/tests/exportfunc.tests
@@ -0,0 +1,84 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# normal operation
+foo()
+{
+	echo exportfunc ok 1
+}
+export -f foo
+${THIS_SH} -c foo
+unset -f foo
+foo-a ()
+{
+	echo exportfunc ok 2
+}
+export -f foo-a
+${THIS_SH} -c 'foo-a'
+
+# CVE-2014-6271
+
+env -i BASH_FUNC_foo%%='() { echo cve6271 ok; } ; echo BAD' ${THIS_SH} -c foo 2>/dev/null
+
+# CVE-2014-7169
+
+rm -f cve7169-bad
+env -i BASH_FUNC_X%%='() { (a)=>\' ${THIS_SH} -c cve7169-bad 2>/dev/null
+: < cve7169-bad
+rm -f cve7169-bad
+
+echo cve7169-bad2 > $TMPDIR/bar
+rm -f cve7169-bad2
+eval  'X() { (a)>\' ; . ./bar 2>/dev/null
+: < cve7169-bad2
+rm -f cve7169-bad2 $TMPDIR/bar
+
+# CVE-2014-7186
+${THIS_SH} ./exportfunc1.sub
+
+# CVE-2014-7187
+${THIS_SH} ./exportfunc2.sub
+
+# CVE-2014-6277
+
+env BASH_FUNC_foo%%="() { 000(){>0;}&000(){ 0;}<<0 0" ${THIS_SH} -c foo 2>/dev/null
+env BASH_FUNC_foo%%="() { 000(){>0;}&000(){ 0;}<<`perl -e '{print "A"x100000}'` 0" ${THIS_SH} -c foo 2>/dev/null
+${THIS_SH} -c "f(){ x(){ _;}; x(){ _;}<<a;}" 2>/dev/null
+
+# CVE-2014-6278
+
+env 'BASH_FUNC_FOO%%=() { 0;}>r[0${$(}0 {>"$(id >/dev/tty)"; }' ${THIS_SH} -c : 2>/dev/null
+
+rm -f HELLO_WORLD
+env BASH_FUNC_FOO%%='() { 0;}>r[0${$(}0 {>HELLO_WORLD; }' ${THIS_SH} -c : 2>/dev/null
+: < HELLO_WORLD
+
+env BASH_FUNC_x%%='() { _;}>_[$($())] { echo vuln;}' ${THIS_SH} -c : 2>/dev/null
+
+env -i BASH_FUNC_x%%='() { _; } >_[${ $() }] { id; }' ${THIS_SH} -c : 2>/dev/null
+
+env BASH_FUNC_x%%=$'() { _;}>_[$($())]\n{ echo vuln;}' ${THIS_SH} -c : 2>/dev/null
+eval 'x() { _;}>_[$($())] { echo vuln;}' 2>/dev/null
+
+eval 'foo() { _; } >_[${ $() }] ;{ echo eval ok; }'
+
+# other tests fixed in bash43-030 concerning function name transformation
+env $'BASH_FUNC_\nfoo%%=() { echo transform-1; }' ${THIS_SH} -c foo 2>/dev/null
+env $'BASH_FUNC_foo\n%%=() { echo transform-2; }' ${THIS_SH} -c foo 2>/dev/null
+env $'BASH_FUNC_  foo  %%=() { echo transform-3; }' ${THIS_SH} -c foo 2>/dev/null
+
+unset -f foo
+env $'BASH_FUNC_#badname%%'=$'() { :; }\nfoo () { echo transform-4; }  ' ${THIS_SH} -c 'foo' 2>/dev/null
+
+# tests of exported names
+${THIS_SH} ./exportfunc3.sub
diff --git a/tests/exportfunc1.sub b/tests/exportfunc1.sub
new file mode 100644
index 0000000..53b4c1f
--- /dev/null
+++ b/tests/exportfunc1.sub
@@ -0,0 +1,34 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+cat <<EOF <<EOF <<EOF <<EOF <<EOF <<EOF <<EOF <<EOF <<EOF <<EOF <<EOF <<EOF <<EOF <<EOF <<EOF <<EOF <<EOF <<EOF
+EOF
+EOF
+EOF
+EOF
+EOF
+EOF
+EOF
+EOF
+EOF
+EOF
+EOF
+EOF
+EOF
+EOF
+EOF
+EOF
+EOF
+EOF
+
+echo after EOF
diff --git a/tests/exportfunc2.sub b/tests/exportfunc2.sub
new file mode 100644
index 0000000..cf5df57
--- /dev/null
+++ b/tests/exportfunc2.sub
@@ -0,0 +1,413 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+for x1 in ; do :
+for x2 in ; do :
+for x3 in ; do :
+for x4 in ; do :
+for x5 in ; do :
+for x6 in ; do :
+for x7 in ; do :
+for x8 in ; do :
+for x9 in ; do :
+for x10 in ; do :
+for x11 in ; do :
+for x12 in ; do :
+for x13 in ; do :
+for x14 in ; do :
+for x15 in ; do :
+for x16 in ; do :
+for x17 in ; do :
+for x18 in ; do :
+for x19 in ; do :
+for x20 in ; do :
+for x21 in ; do :
+for x22 in ; do :
+for x23 in ; do :
+for x24 in ; do :
+for x25 in ; do :
+for x26 in ; do :
+for x27 in ; do :
+for x28 in ; do :
+for x29 in ; do :
+for x30 in ; do :
+for x31 in ; do :
+for x32 in ; do :
+for x33 in ; do :
+for x34 in ; do :
+for x35 in ; do :
+for x36 in ; do :
+for x37 in ; do :
+for x38 in ; do :
+for x39 in ; do :
+for x40 in ; do :
+for x41 in ; do :
+for x42 in ; do :
+for x43 in ; do :
+for x44 in ; do :
+for x45 in ; do :
+for x46 in ; do :
+for x47 in ; do :
+for x48 in ; do :
+for x49 in ; do :
+for x50 in ; do :
+for x51 in ; do :
+for x52 in ; do :
+for x53 in ; do :
+for x54 in ; do :
+for x55 in ; do :
+for x56 in ; do :
+for x57 in ; do :
+for x58 in ; do :
+for x59 in ; do :
+for x60 in ; do :
+for x61 in ; do :
+for x62 in ; do :
+for x63 in ; do :
+for x64 in ; do :
+for x65 in ; do :
+for x66 in ; do :
+for x67 in ; do :
+for x68 in ; do :
+for x69 in ; do :
+for x70 in ; do :
+for x71 in ; do :
+for x72 in ; do :
+for x73 in ; do :
+for x74 in ; do :
+for x75 in ; do :
+for x76 in ; do :
+for x77 in ; do :
+for x78 in ; do :
+for x79 in ; do :
+for x80 in ; do :
+for x81 in ; do :
+for x82 in ; do :
+for x83 in ; do :
+for x84 in ; do :
+for x85 in ; do :
+for x86 in ; do :
+for x87 in ; do :
+for x88 in ; do :
+for x89 in ; do :
+for x90 in ; do :
+for x91 in ; do :
+for x92 in ; do :
+for x93 in ; do :
+for x94 in ; do :
+for x95 in ; do :
+for x96 in ; do :
+for x97 in ; do :
+for x98 in ; do :
+for x99 in ; do :
+for x100 in ; do :
+for x101 in ; do :
+for x102 in ; do :
+for x103 in ; do :
+for x104 in ; do :
+for x105 in ; do :
+for x106 in ; do :
+for x107 in ; do :
+for x108 in ; do :
+for x109 in ; do :
+for x110 in ; do :
+for x111 in ; do :
+for x112 in ; do :
+for x113 in ; do :
+for x114 in ; do :
+for x115 in ; do :
+for x116 in ; do :
+for x117 in ; do :
+for x118 in ; do :
+for x119 in ; do :
+for x120 in ; do :
+for x121 in ; do :
+for x122 in ; do :
+for x123 in ; do :
+for x124 in ; do :
+for x125 in ; do :
+for x126 in ; do :
+for x127 in ; do :
+for x128 in ; do :
+for x129 in ; do :
+for x130 in ; do :
+for x131 in ; do :
+for x132 in ; do :
+for x133 in ; do :
+for x134 in ; do :
+for x135 in ; do :
+for x136 in ; do :
+for x137 in ; do :
+for x138 in ; do :
+for x139 in ; do :
+for x140 in ; do :
+for x141 in ; do :
+for x142 in ; do :
+for x143 in ; do :
+for x144 in ; do :
+for x145 in ; do :
+for x146 in ; do :
+for x147 in ; do :
+for x148 in ; do :
+for x149 in ; do :
+for x150 in ; do :
+for x151 in ; do :
+for x152 in ; do :
+for x153 in ; do :
+for x154 in ; do :
+for x155 in ; do :
+for x156 in ; do :
+for x157 in ; do :
+for x158 in ; do :
+for x159 in ; do :
+for x160 in ; do :
+for x161 in ; do :
+for x162 in ; do :
+for x163 in ; do :
+for x164 in ; do :
+for x165 in ; do :
+for x166 in ; do :
+for x167 in ; do :
+for x168 in ; do :
+for x169 in ; do :
+for x170 in ; do :
+for x171 in ; do :
+for x172 in ; do :
+for x173 in ; do :
+for x174 in ; do :
+for x175 in ; do :
+for x176 in ; do :
+for x177 in ; do :
+for x178 in ; do :
+for x179 in ; do :
+for x180 in ; do :
+for x181 in ; do :
+for x182 in ; do :
+for x183 in ; do :
+for x184 in ; do :
+for x185 in ; do :
+for x186 in ; do :
+for x187 in ; do :
+for x188 in ; do :
+for x189 in ; do :
+for x190 in ; do :
+for x191 in ; do :
+for x192 in ; do :
+for x193 in ; do :
+for x194 in ; do :
+for x195 in ; do :
+for x196 in ; do :
+for x197 in ; do :
+for x198 in ; do :
+for x199 in ; do :
+for x200 in ; do :
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
+done
diff --git a/tests/exportfunc3.sub b/tests/exportfunc3.sub
new file mode 100644
index 0000000..af3125b
--- /dev/null
+++ b/tests/exportfunc3.sub
@@ -0,0 +1,38 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# test function names that cannot be exported
+
+unset foo		# remove from environment if necessary
+
+function foo=bar
+{
+	echo equals-1
+}
+
+export -f 'foo=bar'
+echo status: $?
+
+foo\=bar
+printenv | grep 'foo=bar'
+${THIS_SH} -c 'foo\=bar 2>/dev/null'
+
+function /bin/echo
+{
+	echo bad echo
+}
+
+/bin/echo foo
+export -f '/bin/echo'
+
+${THIS_SH} -c '/bin/echo bar'
diff --git a/tests/extglob.right b/tests/extglob.right
new file mode 100644
index 0000000..691f687
--- /dev/null
+++ b/tests/extglob.right
@@ -0,0 +1,116 @@
+ok 1
+ok 2
+ok 3
+ok 4
+ok 5
+ok 6
+ok 7
+ok 8
+ok 9
+ok 10
+ok 11
+ok 12
+ok 13
+ok 14
+ok 15
+ok 16
+ok 17
+ok 18
+ok 19
+ok 20
+ok 21
+ok 22
+ok 23
+ok 24
+ok 25
+ok 26
+ok 27
+ok 28
+ok 29
+ok 30
+ok 31
+ok 32
+ok 33
+ok 34
+ok 35
+ok 36
+!([*)*
++(a|b[)*
+[a*(]*)z
++()c
++()x
+abc
++(*)x
+abc
+no-file+(a|b)stuff
+no-file+(a*(c)|b)stuff
+abd acd
+acd
+abd
+no
+yes
+yes
+1: bcdef
+2: def
+3: abcde
+4: abc
+5: ef
+6: ef
+7: abcdef
+ab abef
+abcfef abef
+abcdef
+ab abcdef abcfef abef
+abcdef abcfef abef
+ok 37
+ok 38
+ok 39
+ok 40
+ok 41
+ok 42
+a b a,b a-b a.b a:b a;b a_b
+a b a,b a-b a.b a:b a;b a_b
+a b a,b a-b a.b a:b a;b a_b
+a b a,b a-b a.b a:b a;b a_b
+a.b
+a b a,b a-b a:b a;b a_b
+a b a,b a-b a.b a:b a;b a_b
+a b a,b a-b a.b a:b a;b a_b
+a b a,b a-b a.b a:b a;b a_b
+argv[1] = <ef>
+a,b
+a.c
+a.c
+a.c
+a.c
+a.c
+a.c
+ok 1
+ok 2
+ok 3
+a ab
+a ab
+a ab
+a
+. ..
+. .. a.log
+*(foo)
+*(foo|bar)
+a.log
+?(foo)
+a.log
+a.log
+. ..
+. ..
+a.log
+a.log
+.x .y .z
+a b c
+.x .y .z a b c
+a b c
+a b c
+a b c
+a b c
+.x .y .z a b c
+.x .y .z a b c
+*
diff --git a/tests/extglob.tests b/tests/extglob.tests
new file mode 100644
index 0000000..4cb671a
--- /dev/null
+++ b/tests/extglob.tests
@@ -0,0 +1,392 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# test the ksh-like extended globbing features: [!@*?+](patlist)
+
+shopt -s extglob
+
+expect()
+{
+	echo expect "$@"
+}
+
+case "/dev/udp/129.22.8.102/45" in
+/dev/@(tcp|udp)/*/*)	echo ok 1;;
+*)		echo bad 1;;
+esac
+
+# valid numbers
+case 12 in
+0|[1-9]*([0-9]))	echo ok 2;;
+*)			echo bad 2;;
+esac
+
+case 12abc in
+0|[1-9]*([0-9]))	echo bad 3;;
+*)			echo ok 3;;
+esac
+
+case 1 in
+0|[1-9]*([0-9]))	echo ok 4;;
+*)			echo bad 4;;
+esac
+
+# octal numbers
+case 07 in
++([0-7]))		echo ok 5;;
+*)			echo bad 5;;
+esac
+
+case 0377 in
++([0-7]))		echo ok 6;;
+*)			echo bad 6;;
+esac
+
+case 09 in
++([0-7]))		echo bad 7;;
+*)			echo ok 7;;
+esac
+
+# stuff from korn's book
+case paragraph in
+para@(chute|graph))	echo ok 8;;
+*)			echo bad 8;;
+esac
+
+case paramour in
+para@(chute|graph))	echo bad 9;;
+*)			echo ok 9;;
+esac
+
+case para991 in
+para?([345]|99)1)	echo ok 10;;
+*)			echo bad 10;;
+esac
+
+case para381 in
+para?([345]|99)1)	echo bad 11;;
+*)			echo ok 11;;
+esac
+
+case paragraph in
+para*([0-9]))		echo bad 12;;
+*)			echo ok 12;;
+esac
+
+case para in
+para*([0-9]))		echo ok 13;;
+*)			echo bad 13;;
+esac
+
+case para13829383746592 in
+para*([0-9]))		echo ok 14;;
+*)			echo bad 14;;
+esac
+
+case paragraph in
+para*([0-9]))		echo bad 15;;
+*)			echo ok 15;;
+esac
+
+case para in
+para+([0-9]))		echo bad 16;;
+*)			echo ok 16;;
+esac
+
+case para987346523 in
+para+([0-9]))		echo ok 17;;
+*)			echo bad 17;;
+esac
+
+case paragraph in
+para!(*.[0-9]))		echo ok 18;;
+*)			echo bad 18;;
+esac
+
+case para.38 in
+para!(*.[0-9]))		echo ok 19;;
+*)			echo bad 19;;
+esac
+
+case para.graph in
+para!(*.[0-9]))		echo ok 20;;
+*)			echo bad 20;;
+esac
+
+case para39 in
+para!(*.[0-9]))		echo ok 21;;
+*)			echo bad 21;;
+esac
+
+# tests derived from those in rosenblatt's korn shell book
+
+case "" in
+*(0|1|3|5|7|9))		echo ok 22;;
+*)			echo bad 22;
+esac
+
+case 137577991 in
+*(0|1|3|5|7|9))		echo ok 23;;
+*)			echo bad 23;
+esac
+
+case 2468 in
+*(0|1|3|5|7|9))		echo bad 24;;
+*)			echo ok 24;
+esac
+
+case file.c in
+*.c?(c))		echo ok 25;;
+*)			echo bad 25;;
+esac
+
+case file.C in
+*.c?(c))		echo bad 26;;
+*)			echo ok 26;;
+esac
+
+case file.cc in
+*.c?(c))		echo ok 27;;
+*)			echo bad 27;;
+esac
+
+case file.ccc in
+*.c?(c))		echo bad 28;;
+*)			echo ok 28;;
+esac
+
+case parse.y in
+!(*.c|*.h|Makefile.in|config*|README))	echo ok 29;;
+*)			echo bad 29;;
+esac
+
+case shell.c in
+!(*.c|*.h|Makefile.in|config*|README))	echo bad 30;;
+*)			echo ok 30;;
+esac
+
+case Makefile in
+!(*.c|*.h|Makefile.in|config*|README))	echo ok 31;;
+*)			echo bad 31;;
+esac
+
+case "VMS.FILE;1" in
+*\;[1-9]*([0-9]))	echo ok 32;;
+*)			echo bad 32;;
+esac
+
+case "VMS.FILE;0" in
+*\;[1-9]*([0-9]))	echo bad 33;;
+*)			echo ok 33;;
+esac
+case "VMS.FILE;" in
+*\;[1-9]*([0-9]))	echo bad 34;;
+*)			echo ok 34;;
+esac
+case "VMS.FILE;139" in
+*\;[1-9]*([0-9]))	echo ok 35;;
+*)			echo bad 35;;
+esac
+case "VMS.FILE;1N" in
+*\;[1-9]*([0-9]))	echo bad 36;;
+*)			echo ok 36;;
+esac
+
+# tests derived from the pd-ksh test suite
+
+MYDIR=$PWD      # save where we are
+
+: ${TMPDIR:=/var/tmp}
+TESTDIR=$TMPDIR/eglob-test-$$
+mkdir $TESTDIR
+builtin cd $TESTDIR || { echo $0: cannot cd to $TESTDIR >&2 ; exit 1; }
+rm -rf *
+
+touch abcx abcz bbc
+expect '!([*)*'
+echo !([*)*
+
+expect '+(a|b[)*'
+echo +(a|b[)*
+
+expect '[a*(]*z'
+echo [a*(]*)z
+
+rm -f abcx abcz bbc
+
+touch abc
+
+expect '+()c'
+echo +()c
+expect '+()x'
+echo +()x
+expect abc
+echo +(*)c
+expect '+(*)x'
+echo +(*)x
+
+# extended globbing should not be performed on the output of substitutions
+x='@(*)'
+expect '@(*)'
+echo $x
+
+expect 'no-file+(a|b)stuff'
+echo no-file+(a|b)stuff
+expect 'no-file+(a*(c)|b)stuff'
+echo no-file+(a*(c)|b)stuff
+
+touch abd acd
+
+expect 'abd acd'
+echo a+(b|c)d
+
+expect 'acd'
+echo a!(@(b|B))d
+
+expect 'abd'
+echo a[b*(foo|bar)]d
+
+# simple kleene star tests
+expect no
+case foo in *(a|b[)) echo yes;; *) echo no;; esac
+
+expect yes
+case foo in *(a|b[)|f*) echo yes;; *) echo no;; esac
+
+# this doesn't work right yet; it is an incorrectly formed pattern
+expect yes
+case '*(a|b[)' in *(a|b[)) echo yes;; *) echo no;; esac
+
+# check extended globbing in pattern removal -- these don't work right yet
+x=abcdef
+
+expect '1: bcdef'
+echo 1: ${x#+(a|abc)}
+expect '2: def'
+echo 2: ${x##+(a|abc)}
+expect '3: abcde'
+echo 3: ${x%+(def|f)}
+expect '4: abc'
+echo 4: ${x%%+(f|def)}
+
+# these work ok
+
+expect '5: ef'
+echo 5: ${x#*(a|b)cd}
+expect '6: ef'
+echo 6: "${x#*(a|b)cd}"
+expect '7: abcdef'
+echo 7: ${x#"*(a|b)cd"}
+
+# More tests derived from a bug report concerning extended glob patterns
+# following a *
+builtin cd $TESTDIR || { echo $0: cannot cd to $TESTDIR >&2 ; exit 1; }
+rm -rf *
+
+touch ab abcdef abef abcfef
+
+expect 'ab abef'
+echo ab*(e|f)
+
+expect 'abcfef abef'
+echo ab?*(e|f)
+
+expect abcdef
+echo ab*d+(e|f)
+
+expect 'ab abcdef abcfef abef'
+echo ab**(e|f)
+
+expect 'abcdef abcfef abef'
+echo ab*+(e|f)
+
+case 'abcfefg' in
+ab**(e|f))	echo ok 37;;
+*)		echo bad 37;;
+esac
+
+case 'abcfefg' in
+ab**(e|f)g)	echo ok 38;;
+*a)		echo bad 38;;
+esac
+
+case ab in
+ab*+(e|f))	echo bad 39;;
+*)		echo ok 39;;
+esac
+
+case abef in
+ab***ef)	echo ok 40;;
+*)		echo bad 40;;
+esac
+
+case abef in
+ab**)		echo ok 41;;
+*)		echo bad 41;;
+esac
+
+# bug in all versions up to and including bash-2.05b
+case "123abc" in
+*?(a)bc)	echo ok 42;;
+*)		echo bad 42;;
+esac
+
+# clean up and do the next one
+
+builtin cd /
+rm -rf $TESTDIR
+
+mkdir $TESTDIR
+builtin cd $TESTDIR
+
+LC_COLLATE=C # have to set this; it affects the sorting 
+touch a.b a,b a:b a-b a\;b a\ b a_b
+
+echo a[^[:alnum:]]b
+echo a[-.,:\;\ _]b
+
+echo a@([^[:alnum:]])b
+echo a@([-.,:; _])b
+echo a@([.])b
+echo a@([^.])b
+echo a@([^x])b
+echo a+([^[:alnum:]])b
+
+echo a@(.|[^[:alnum:]])b
+
+builtin cd /
+rm -rf $TESTDIR
+
+x=abcdef
+recho "${x#*(a|b)cd}"
+
+TEST='a , b'
+shopt -s globstar
+echo ${TEST//*([[:space:]]),*([[:space:]])/,}
+shopt -u globstar
+
+# this is for the benefit of pure coverage, so it writes the pcv file
+# in the right place
+builtin cd "$MYDIR"
+
+${THIS_SH} ./extglob1.sub
+
+${THIS_SH} ./extglob1a.sub
+
+${THIS_SH} ./extglob3.sub
+
+${THIS_SH} ./extglob4.sub
+
+${THIS_SH} ./extglob5.sub
+
+exit 0
diff --git a/tests/extglob1.sub b/tests/extglob1.sub
new file mode 100644
index 0000000..c73b1ea
--- /dev/null
+++ b/tests/extglob1.sub
@@ -0,0 +1,50 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+MYDIR=$PWD
+
+: ${TMPDIR:=/tmp}
+GDIR=$TMPDIR/gtest-$$
+
+shopt -s extglob
+
+mkdir $GDIR || exit 1
+cd $GDIR || exit 1
+
+touch a.c
+
+echo +([[:alpha:].])
+echo +([[:alpha:].])+([[:alpha:].])
+echo *([[:alpha:].])
+echo *([[:alpha:].])*([[:alpha:].])
+
+echo ?([[:alpha:].])?([[:alpha:].])?([[:alpha:].])
+echo @([[:alpha:].])@([[:alpha:].])@([[:alpha:].])
+
+case . in
+!([[:alpha:].]) )	echo bad 1;;
+*)			echo ok 1;;
+esac
+
+case . in
+?([[:alpha:].]) )	echo ok 2;;
+*)			echo bad 2;;
+esac
+
+case . in
+@([[:alpha:].]) )	echo ok 3;;
+*)			echo bad 3;;
+esac
+
+cd "$MYDIR"
+rm -rf $GDIR
diff --git a/tests/extglob1a.sub b/tests/extglob1a.sub
new file mode 100644
index 0000000..1470386
--- /dev/null
+++ b/tests/extglob1a.sub
@@ -0,0 +1,29 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+shopt -s extglob
+
+TESTDIR=${TMPDIR:-/tmp}/eglob-test-$$
+mkdir $TESTDIR
+builtin cd $TESTDIR || { echo $0: cannot cd to $TESTDIR >&2 ; exit 1; }
+rm -rf *
+
+touch a ab ba
+
+echo a*!(x)
+echo a!(x)
+echo a*?(x)
+echo a?(x)
+
+builtin cd $OLDPWD
+rm -rf $TESTDIR
diff --git a/tests/extglob2.right b/tests/extglob2.right
new file mode 100644
index 0000000..f8a09df
--- /dev/null
+++ b/tests/extglob2.right
@@ -0,0 +1,70 @@
+0:  [[ fofo = *(f*(o)) ]]
+0:  [[ ffo = *(f*(o)) ]]
+0:  [[ foooofo = *(f*(o)) ]]
+0:  [[ foooofof = *(f*(o)) ]]
+0:  [[ fooofoofofooo = *(f*(o)) ]]
+1:  [[ foooofof = *(f+(o)) ]]
+1:  [[ xfoooofof = *(f*(o)) ]]
+1:  [[ foooofofx = *(f*(o)) ]]
+0:  [[ ofxoofxo = *(*(of*(o)x)o) ]]
+1:  [[ ofooofoofofooo = *(f*(o)) ]]
+0:  [[ foooxfooxfoxfooox = *(f*(o)x) ]]
+1:  [[ foooxfooxofoxfooox = *(f*(o)x) ]]
+0:  [[ foooxfooxfxfooox = *(f*(o)x) ]]
+0:  [[ ofxoofxo = *(*(of*(o)x)o) ]]
+0:  [[ ofoooxoofxo = *(*(of*(o)x)o) ]]
+0:  [[ ofoooxoofxoofoooxoofxo = *(*(of*(o)x)o) ]]
+0:  [[ ofoooxoofxoofoooxoofxoo = *(*(of*(o)x)o) ]]
+1:  [[ ofoooxoofxoofoooxoofxofo = *(*(of*(o)x)o) ]]
+0:  [[ ofoooxoofxoofoooxoofxooofxofxo = *(*(of*(o)x)o) ]]
+0:  [[ aac = *(@(a))a@(c) ]]
+0:  [[ ac = *(@(a))a@(c) ]]
+1:  [[ c = *(@(a))a@(c) ]]
+0:  [[ aaac = *(@(a))a@(c) ]]
+1:  [[ baaac = *(@(a))a@(c) ]]
+0:  [[ abcd = ?@(a|b)*@(c)d ]]
+0:  [[ abcd = @(ab|a*@(b))*(c)d ]]
+0:  [[ acd = @(ab|a*(b))*(c)d ]]
+0:  [[ abbcd = @(ab|a*(b))*(c)d ]]
+0:  [[ effgz = @(b+(c)d|e*(f)g?|?(h)i@(j|k)) ]]
+0:  [[ efgz = @(b+(c)d|e*(f)g?|?(h)i@(j|k)) ]]
+0:  [[ egz = @(b+(c)d|e*(f)g?|?(h)i@(j|k)) ]]
+0:  [[ egzefffgzbcdij = *(b+(c)d|e*(f)g?|?(h)i@(j|k)) ]]
+1:  [[ egz = @(b+(c)d|e+(f)g?|?(h)i@(j|k)) ]]
+0:  [[ ofoofo = *(of+(o)) ]]
+0:  [[ oxfoxoxfox = *(oxf+(ox)) ]]
+1:  [[ oxfoxfox = *(oxf+(ox)) ]]
+0:  [[ ofoofo = *(of+(o)|f) ]]
+0:  [[ foofoofo = @(foo|f|fo)*(f|of+(o)) ]]
+0:  [[ oofooofo = *(of|oof+(o)) ]]
+0:  [[ fffooofoooooffoofffooofff = *(*(f)*(o)) ]]
+0:  [[ fofoofoofofoo = *(fo|foo) ]]
+0:  [[ foo = !(x) ]]
+0:  [[ foo = !(x)* ]]
+1:  [[ foo = !(foo) ]]
+0:  [[ foo = !(foo)* ]]
+0:  [[ foobar = !(foo) ]]
+0:  [[ foobar = !(foo)* ]]
+0:  [[ moo.cow = !(*.*).!(*.*) ]]
+1:  [[ mad.moo.cow = !(*.*).!(*.*) ]]
+1:  [[ mucca.pazza = mu!(*(c))?.pa!(*(z))? ]]
+0:  [[ fff = !(f) ]]
+0:  [[ fff = *(!(f)) ]]
+0:  [[ fff = +(!(f)) ]]
+0:  [[ ooo = !(f) ]]
+0:  [[ ooo = *(!(f)) ]]
+0:  [[ ooo = +(!(f)) ]]
+0:  [[ foo = !(f) ]]
+0:  [[ foo = *(!(f)) ]]
+0:  [[ foo = +(!(f)) ]]
+1:  [[ f = !(f) ]]
+1:  [[ f = *(!(f)) ]]
+1:  [[ f = +(!(f)) ]]
+0:  [[ foot = @(!(z*)|*x) ]]
+1:  [[ zoot = @(!(z*)|*x) ]]
+0:  [[ foox = @(!(z*)|*x) ]]
+0:  [[ zoox = @(!(z*)|*x) ]]
+0:  [[ foo = *(!(foo)) ]]
+1:  [[ foob = !(foo)b* ]]
+0:  [[ foobb = !(foo)b* ]]
+0 tests failed.
diff --git a/tests/extglob2.sub b/tests/extglob2.sub
new file mode 100644
index 0000000..f4a3b37
--- /dev/null
+++ b/tests/extglob2.sub
@@ -0,0 +1,7 @@
+LANG=en_US.UTF-8
+
+shopt -s extglob
+a="aaaäöü"
+
+echo "${a}" "${a//?aa}" "${a//\aaa}"
+exit 0 
diff --git a/tests/extglob2.tests b/tests/extglob2.tests
new file mode 100644
index 0000000..187253b
--- /dev/null
+++ b/tests/extglob2.tests
@@ -0,0 +1,103 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+#
+# More ksh-like extended globbing tests, cribbed from zsh-3.1.5
+#
+shopt -s extglob
+
+failed=0
+while read res str pat; do
+  [[ $res = '#' ]] && continue
+  [[ $str = ${pat} ]]
+  ts=$?
+  [[ $1 = -q ]] || echo "$ts:  [[ $str = $pat ]]"
+  if [[ ( $ts -gt 0 && $res = t) || ($ts -eq 0 && $res = f) ]]; then
+    echo "Test failed:  [[ $str = $pat ]]"
+    (( failed += 1 ))
+  fi
+done <<EOT
+t fofo                *(f*(o))
+t ffo                 *(f*(o))
+t foooofo             *(f*(o))
+t foooofof            *(f*(o))
+t fooofoofofooo       *(f*(o))
+f foooofof            *(f+(o))
+f xfoooofof           *(f*(o))
+f foooofofx           *(f*(o))
+t ofxoofxo            *(*(of*(o)x)o)
+f ofooofoofofooo      *(f*(o))
+t foooxfooxfoxfooox   *(f*(o)x)
+f foooxfooxofoxfooox  *(f*(o)x)
+t foooxfooxfxfooox    *(f*(o)x)
+t ofxoofxo            *(*(of*(o)x)o)
+t ofoooxoofxo         *(*(of*(o)x)o)
+t ofoooxoofxoofoooxoofxo            *(*(of*(o)x)o)
+t ofoooxoofxoofoooxoofxoo           *(*(of*(o)x)o)
+f ofoooxoofxoofoooxoofxofo          *(*(of*(o)x)o)
+t ofoooxoofxoofoooxoofxooofxofxo    *(*(of*(o)x)o)
+t aac    *(@(a))a@(c)
+t ac     *(@(a))a@(c)
+f c      *(@(a))a@(c)
+t aaac   *(@(a))a@(c)
+f baaac  *(@(a))a@(c)
+t abcd   ?@(a|b)*@(c)d
+t abcd   @(ab|a*@(b))*(c)d
+t acd    @(ab|a*(b))*(c)d
+t abbcd  @(ab|a*(b))*(c)d
+t effgz  @(b+(c)d|e*(f)g?|?(h)i@(j|k))
+t efgz   @(b+(c)d|e*(f)g?|?(h)i@(j|k))
+t egz    @(b+(c)d|e*(f)g?|?(h)i@(j|k))
+t egzefffgzbcdij    *(b+(c)d|e*(f)g?|?(h)i@(j|k))
+f egz    @(b+(c)d|e+(f)g?|?(h)i@(j|k))
+t ofoofo *(of+(o))
+t oxfoxoxfox    *(oxf+(ox))
+f oxfoxfox      *(oxf+(ox))
+t ofoofo        *(of+(o)|f)
+# The following is supposed to match only as fo+ofo+ofo
+t foofoofo      @(foo|f|fo)*(f|of+(o))
+t oofooofo      *(of|oof+(o))
+t fffooofoooooffoofffooofff      *(*(f)*(o))
+# The following tests backtracking in alternation matches
+t fofoofoofofoo *(fo|foo)
+# Exclusion
+t foo           !(x)
+t foo           !(x)*
+f foo           !(foo)
+t foo           !(foo)*
+t foobar        !(foo)
+t foobar        !(foo)*
+t moo.cow       !(*.*).!(*.*)
+f mad.moo.cow   !(*.*).!(*.*)
+f mucca.pazza   mu!(*(c))?.pa!(*(z))?
+t fff           !(f)
+t fff           *(!(f))
+t fff           +(!(f))
+t ooo           !(f)
+t ooo           *(!(f))
+t ooo           +(!(f))
+t foo           !(f)
+t foo           *(!(f))
+t foo           +(!(f))
+f f             !(f)
+f f             *(!(f))
+f f             +(!(f))
+t foot          @(!(z*)|*x)
+f zoot          @(!(z*)|*x)
+t foox          @(!(z*)|*x)
+t zoox          @(!(z*)|*x)
+t foo           *(!(foo))
+f foob          !(foo)b*
+t foobb         !(foo)b*
+EOT
+echo "$failed tests failed."
diff --git a/tests/extglob3.right b/tests/extglob3.right
new file mode 100644
index 0000000..db9447e
--- /dev/null
+++ b/tests/extglob3.right
@@ -0,0 +1,27 @@
+match 1
+match 2
+match 3
+match 4
+match 1a
+match 1b
+match 2a
+match 2b
+match 3a
+match 3b
+match 4a
+match 4b
+match 5
+match 6
+match 7
+match 8
+match 9
+match 10
+match 11
+match 12
+match 13
+match 14
+match 15
+match 16
+match 17
+match 18
+ok 19
diff --git a/tests/extglob3.sub b/tests/extglob3.sub
new file mode 100644
index 0000000..bf5d263
--- /dev/null
+++ b/tests/extglob3.sub
@@ -0,0 +1,37 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+shopt -s extglob
+DIR=$TMPDIR/extglob-$$
+mkdir $DIR
+cd $DIR
+
+touch a.log
+
+echo *(.)
+echo *(.)*
+echo *(foo)
+echo *(foo|bar)
+echo ?(foo)*
+echo ?(foo)
+echo *(foo)*
+echo @(|foo)*
+
+echo *(foo).*
+echo *(foo|bar).*
+
+echo !(foo)*
+echo !(foo|bar)*
+
+cd $OLDPWD
+rm -rf $DIR
diff --git a/tests/extglob3.tests b/tests/extglob3.tests
new file mode 100644
index 0000000..56f8b39
--- /dev/null
+++ b/tests/extglob3.tests
@@ -0,0 +1,69 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+shopt -s extglob
+
+[[ ab/../ == @(ab|+([^/]))/..?(/) ]] && echo match 1
+
+[[ ab/../ == +([^/])/..?(/) ]] && echo match 2
+
+[[ ab/../ == @(ab|?b)/..?(/) ]] && echo match 3
+
+[[ ab/../ == +([^/])/../ ]] && echo match 4
+
+[[ ab/../ == +([!/])/..?(/) ]] && echo match 1a
+
+[[ ab/../ == @(ab|+([!/]))/..?(/) ]] && echo match 1b
+
+[[ ab/../ == +([!/])/../ ]] && echo match 2a
+
+[[ ab/../ == +([!/])/..?(/) ]] && echo match 2b
+
+[[ ab/../ == +([!/])/..@(/) ]] && echo match 3a
+
+[[ ab/../ == +(ab)/..?(/) ]] && echo match 3b
+
+[[ ab/../ == [!/][!/]/../ ]] && echo match 4a
+
+[[ ab/../ == @(ab|?b)/..?(/) ]] && echo match 4b
+
+[[ ab/../ == [^/][^/]/../ ]] && echo match 5
+
+[[ ab/../ == ?b/..?(/) ]] && echo match 6
+
+[[ ab/../ == +(?b)/..?(/) ]] && echo match 7
+
+[[ ab/../ == +(?b|?b)/..?(/) ]] && echo match 8
+
+[[ ab/../ == @(?b|?b)/..?(/) ]] && echo match 9
+
+[[ ab/../ == @(a?|?b)/..?(/) ]] && echo match 10
+
+[[ ab/../ == ?(ab)/..?(/) ]] && echo match 11
+
+[[ ab/../ == ?(ab|??)/..?(/) ]] && echo match 12
+
+[[ ab/../ == @(??)/..?(/) ]] && echo match 13
+
+[[ ab/../ == @(??|a*)/..?(/) ]] && echo match 14
+
+[[ ab/../ == @(a*)/..?(/) ]] && echo match 15
+
+[[ ab/../ == +(??)/..?(/) ]] && echo match 16
+
+[[ ab/../ == +(??|a*)/..?(/) ]] && echo match 17
+
+[[ ab/../ == +(a*)/..?(/) ]] && echo match 18
+
+#
+j="@(x)" ; [[ x == $j ]] && echo ok 19
diff --git a/tests/extglob4.sub b/tests/extglob4.sub
new file mode 100644
index 0000000..5369cd6
--- /dev/null
+++ b/tests/extglob4.sub
@@ -0,0 +1,45 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+LANG=C
+LC_ALL=C
+
+: ${TMPDIR:=/tmp}
+GTDIR=$TMPDIR/extglob4-$$
+
+shopt -s extglob
+[ -d "${GTDIR}" ] || mkdir "${GTDIR}"
+cd "${GTDIR}" || {
+	echo "extglob4: cannot cd to ${GTDIR}"
+	exit 2
+}
+
+touch a b c .x .y .z
+echo .!(|.)                     # correct
+echo *                          # correct
+
+echo @(*|.!(|.))                # wrong, adds . and ..
+echo @(*|@(f))                  # ??
+echo @(*|@(ff))
+
+echo !(f)
+echo !(f)!(f)
+
+shopt -s dotglob
+echo @(*|@(f))
+echo @(*|@(ff))
+
+cd $OLDPWD
+rm -rf $GTDIR
+
+[[ a = a*?(/)b ]] && echo bad match 1
diff --git a/tests/extglob5.sub b/tests/extglob5.sub
new file mode 100644
index 0000000..580229b
--- /dev/null
+++ b/tests/extglob5.sub
@@ -0,0 +1,31 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# globignore extglob patterns containing colons -- problem until bash-4.2
+
+: ${TMPDIR:=/tmp}
+TESTDIR=$TMPDIR/bash-globignore-$$
+[ -d "$TESTDIR" ] || mkdir "$TESTDIR"
+
+cd "$TESTDIR" || exit 2
+
+shopt -s extglob
+GLOBIGNORE='+([^[:alnum:]]):@([-.,:; _]):[![:alnum:]]'
+
+touch ';' '++'
+echo *
+
+rm ';' '++'
+
+cd $OLDPWD
+rmdir $TESTDIR
diff --git a/tests/func.right b/tests/func.right
new file mode 100644
index 0000000..f4db4d1
--- /dev/null
+++ b/tests/func.right
@@ -0,0 +1,169 @@
+a returns 5
+b returns 4
+c returns 3
+d returns 2
+in e
+e returned 25
+x is 25
+ZZ
+abcde
+defghi
+ZZ
+5
+0
+AVAR
+AVAR
+foo
+foo
+AVAR
+5
+5
+f1
+f1 () 
+{ 
+    ( return 5 );
+    status=$?;
+    echo $status;
+    return $status
+}
+before: try to assign to FUNCNAME
+outside: FUNCNAME =
+before: FUNCNAME = func
+FUNCNAME = func2
+after: FUNCNAME = func
+outside2: FUNCNAME =
+function
+zf is a function
+zf () 
+{ 
+    echo this is zf
+}
+f is a function
+f () 
+{ 
+    echo f-x;
+    echo f-y
+} 1>&2
+subshell
+f is a function
+f () 
+{ 
+    echo f-x;
+    echo f-y
+} 1>&2
+f2 is a function
+f2 () 
+{ 
+    echo f2-a;
+    function f3 () 
+    { 
+        echo f3-a;
+        echo f3-b
+    } 1>&2;
+    f3
+}
+subshell
+f2 is a function
+f2 () 
+{ 
+    echo f2-a;
+    function f3 () 
+    { 
+        echo f3-a;
+        echo f3-b
+    } 1>&2;
+    f3
+}
+f4 is a function
+f4 () 
+{ 
+    echo f4-a;
+    function f5 () 
+    { 
+        echo f5-a;
+        echo f5-b
+    } 1>&2;
+    f5
+} 2>&1
+subshell
+f4 is a function
+f4 () 
+{ 
+    echo f4-a;
+    function f5 () 
+    { 
+        echo f5-a;
+        echo f5-b
+    } 1>&2;
+    f5
+} 2>&1
+testgrp is a function
+testgrp () 
+{ 
+    echo testgrp-a;
+    { 
+        echo tg-x;
+        echo tg-y
+    } 1>&2;
+    echo testgrp-b
+}
+subshell
+testgrp is a function
+testgrp () 
+{ 
+    echo testgrp-a;
+    { 
+        echo tg-x;
+        echo tg-y
+    } 1>&2;
+    echo testgrp-b
+}
+funca is a function
+funca () 
+{ 
+    ( echo func-a )
+}
+funcb is a function
+funcb () 
+{ 
+    ( echo func-b )
+}
+funcc is a function
+funcc () 
+{ 
+    ( echo func-c ) 2>&1
+}
+func-a
+func-b
+func-c
+foo-bar
+foo-bar () 
+{ 
+    :
+}
+expect 5 10
+5 10
+expect 20
+20
+expect 5 20
+5 20
+expect 5 20
+5 20
+expect 2 40
+2 40
+expect 5 20
+5 20
+./func4.sub: line 23: foo: maximum function nesting level exceeded (100)
+1
+after: f = 100
+./func4.sub: line 23: foo: maximum function nesting level exceeded (100)
+1
+after: f = 100
+7
+after FUNCNEST reset: f = 201
+7
+after FUNCNEST unset: f = 201
+./func4.sub: line 23: foo: maximum function nesting level exceeded (20)
+1
+after FUNCNEST assign: f = 38
+5
diff --git a/tests/func.tests b/tests/func.tests
new file mode 100644
index 0000000..fffe3d2
--- /dev/null
+++ b/tests/func.tests
@@ -0,0 +1,192 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+a()
+{
+	x=$((x - 1))
+	return 5
+}
+
+b()
+{
+	x=$((x - 1))
+	a
+	echo a returns $?
+	return 4
+}
+
+c()
+{
+	x=$((x - 1))
+	b
+	echo b returns $?
+	return 3
+}
+
+d()
+{
+	x=$((x - 1))
+	c
+	echo c returns $?
+	return 2
+}
+
+e()
+{
+	d
+	echo d returns $?
+	echo in e
+	x=$((x - 1))
+	return $x
+}
+
+f()
+{
+	e
+	echo e returned $?
+	echo x is $x
+	return 0
+}
+
+x=30
+f
+
+# make sure unsetting a local variable preserves the `local' attribute
+f1()
+{
+	local zz
+	zz=abcde
+	echo $zz
+	unset zz
+	zz=defghi
+	echo $zz
+}
+
+zz=ZZ
+echo $zz
+f1
+echo $zz
+
+unset -f f1
+f1()
+{
+	return 5
+}
+
+( f1 )
+echo $?
+
+unset -f f1
+f1()
+{
+	sleep 5
+	return 5
+}
+
+f1 &
+wait
+echo $?
+
+unset -f f1
+
+f1()
+{
+	echo $AVAR
+	printenv AVAR
+}
+
+AVAR=AVAR
+echo $AVAR
+f1
+AVAR=foo f1
+echo $AVAR
+
+unset -f f1
+# make sure subshells can do a `return' if we're executing in a function
+f1()
+{
+	( return 5 )
+	status=$?
+	echo $status
+	return $status
+}
+
+f1
+echo $?
+
+declare -F f1	# should print just the name
+declare -f f1	# should print the definition, too
+
+# no functions should be exported, right?
+declare -xF
+declare -xf
+
+# FUNCNAME tests
+func2()
+{
+	echo FUNCNAME = $FUNCNAME
+}
+
+func()
+{
+	echo before: FUNCNAME = $FUNCNAME
+	func2
+	echo after: FUNCNAME = $FUNCNAME
+}
+
+echo before: try to assign to FUNCNAME
+FUNCNAME=7
+
+echo outside: FUNCNAME = $FUNCNAME
+func
+echo outside2: FUNCNAME = $FUNCNAME
+
+# test exported functions (and cached exportstr)
+zf()
+{
+	echo this is zf
+}
+export -f zf
+
+${THIS_SH} -c 'type -t zf'
+${THIS_SH} -c 'type zf'
+
+${THIS_SH} ./func1.sub
+
+# tests for functions whose bodies are not group commands, with and without
+# attached redirections
+${THIS_SH} ./func2.sub
+
+# test for some posix-specific function behavior
+${THIS_SH} ./func3.sub
+
+# FUNCNEST testing
+${THIS_SH} ./func4.sub
+
+unset -f myfunction
+myfunction() {
+    echo "bad shell function redirection"
+} >> /dev/null
+
+myfunction
+myfunction | cat
+
+segv()
+{
+	echo foo | return 5
+}
+
+segv
+echo $?
+
+exit 0
diff --git a/tests/func1.sub b/tests/func1.sub
new file mode 100644
index 0000000..f7e84f4
--- /dev/null
+++ b/tests/func1.sub
@@ -0,0 +1,68 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+#
+# Test that redirections attached to shell functions are printed correctly.
+# This was a bug in all bash versions before bash-2.04.
+#
+f()
+{
+	echo f-x
+	echo f-y
+} >&2
+
+type f
+export -f f
+${THIS_SH} -c 'echo subshell; type f'
+
+f2()
+{
+	echo f2-a
+	f3()
+	{
+		echo f3-a
+		echo f3-b
+	} >&2
+	f3
+}
+
+type f2
+
+export -f f2
+${THIS_SH} -c 'echo subshell; type f2'
+
+f4()
+{
+	echo f4-a
+	f5()
+	{
+		echo f5-a
+		echo f5-b
+	} >&2
+	f5
+} 2>&1
+
+type f4
+export -f f4
+${THIS_SH} -c 'echo subshell; type f4'
+
+testgrp()
+{
+	echo testgrp-a
+	{ echo tg-x; echo tg-y; } >&2
+	echo testgrp-b
+}
+type testgrp
+
+export -f testgrp
+${THIS_SH} -c 'echo subshell; type testgrp'
diff --git a/tests/func2.sub b/tests/func2.sub
new file mode 100644
index 0000000..9caabfc
--- /dev/null
+++ b/tests/func2.sub
@@ -0,0 +1,40 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+funca() (
+	echo func-a
+)
+
+funcb() ( echo func-b )
+
+funcc() (
+	echo func-c
+) 2>&1
+
+type funca
+type funcb
+type funcc
+
+funca
+funcb
+funcc
+
+# when not in posix mode, bash allows non-identifiers as function names
+set +o posix
+foo-bar()
+{
+	:;
+}
+
+declare -F foo-bar
+declare -f foo-bar
diff --git a/tests/func3.sub b/tests/func3.sub
new file mode 100644
index 0000000..5c0eac2
--- /dev/null
+++ b/tests/func3.sub
@@ -0,0 +1,67 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+#
+# test some posix-mode-specific function behavior
+#
+set -o posix
+func()
+{
+	return 5
+}
+
+myfunction () {
+    var=20 return
+}
+var=10
+echo expect 5 10
+func
+echo $? $var
+
+myfunction
+echo expect 20
+echo $var
+
+echo expect 5 20
+func
+echo $? $var
+
+echo expect 5 20
+var=30 func
+echo $? $var
+
+: ${TMPDIR:=/tmp}
+TMPFILE=$TMPDIR/func3.sub.$$
+
+rm -f $TMPFILE
+echo 'var=40 return 2' > $TMPFILE
+
+# test the behavior of `return' and preceding variable assignments here
+# because it's convenient
+var=10
+echo expect 2 40
+. $TMPFILE
+echo $? $var
+
+rm -f $TMPFILE
+
+#set -o posix
+var=0
+func()
+{
+	var=20 return 5
+}
+
+echo expect 5 20
+var=30 func
+echo $? $var
diff --git a/tests/func4.sub b/tests/func4.sub
new file mode 100644
index 0000000..69f15e4
--- /dev/null
+++ b/tests/func4.sub
@@ -0,0 +1,52 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# test FUNCNEST functionality -- bash-4.2
+FUNCNEST=100
+
+foo()
+{
+	(( f++ ))
+	if (( f > 200 )); then
+		return 7
+	fi
+	foo
+}
+
+f=0
+foo
+echo $?
+echo after: f = $f
+
+f=0
+foo
+echo $?
+echo after: f = $f
+
+f=0
+FUNCNEST=0
+foo
+echo $?
+echo after FUNCNEST reset: f = $f
+
+f=0
+unset FUNCNEST
+foo
+echo $?
+echo after FUNCNEST unset: f = $f
+
+FUNCNEST=20
+f=$(( FUNCNEST - 2 ))
+foo
+echo $?
+echo after FUNCNEST assign: f = $f
diff --git a/tests/getopts.right b/tests/getopts.right
new file mode 100644
index 0000000..599d830
--- /dev/null
+++ b/tests/getopts.right
@@ -0,0 +1,68 @@
+getopts: usage: getopts optstring name [arg ...]
+2
+getopts: usage: getopts optstring name [arg ...]
+2
+./getopts.tests: line 23: getopts: -a: invalid option
+getopts: usage: getopts optstring name [arg ...]
+-a specified
+-b bval specified
+remaining args: one two three
+-a specified
+-b bval specified
+remaining args: one two three four five six seven eight nine ten eleven twelve
+./getopts1.sub: option requires an argument -- b
+Usage: ./getopts1.sub [-a] [-b value] args
+-a specified
+-c cval specified
+-d specified
+-a specified
+-b 3 specified
+remaining args: one two three four five
+-a specified
+-b bval specified
+remaining args: one two three
+-a specified
+-b bval specified
+remaining args: one two three
+./getopts4.sub: error: option `b' requires an argument
+Usage: ./getopts4.sub [-a] [-b value] args
+./getopts4.sub: error: illegal option character `c'
+Usage: ./getopts4.sub [-a] [-b value] args
+-a specified
+remaining args: -b bval one two three
+OPTERR=0
+a here
+something else here
+OPTIND=3
+getop: OPTERR=1
+a here
+./getopts5.sub: illegal option -- c
+something else here
+./getopts5.sub: illegal option -- d
+something else here
+./getopts5.sub: illegal option -- e
+something else here
+getop: OPTIND=5
+OPTIND=3
+OPTERR=0
+-a specified
+remaining args: 
+-a specified
+remaining args: 
+-a specified
+remaining args: 
+0
+./getopts7.sub: line 17: getopts: `opt-var': not a valid identifier
+remaining args: 
+opt: x
+opt: y
+opt: a
+opt: b
+opt: c
+opt: z
+$1 = a
+./getopts10.sub: line 16: OPTARG: readonly variable
+OPTARG = x = ?
+unset x = ?
+declare -r RO="foo"
+declare -r RO="foo"
diff --git a/tests/getopts.tests b/tests/getopts.tests
new file mode 100644
index 0000000..06cc29a
--- /dev/null
+++ b/tests/getopts.tests
@@ -0,0 +1,56 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# getopts tests
+# this should fail
+getopts
+echo $?
+getopts opts
+echo $?
+
+# maybe someday we will have a ksh93-like -a argument to set the name
+# used in error messages, but not yet
+getopts -a opts name
+
+${THIS_SH} ./getopts1.sub -a -b bval one two three
+# make sure getopts works when there are more than 9 positional parameters
+${THIS_SH} ./getopts1.sub -a -b bval one two three four five six seven eight nine ten eleven twelve
+${THIS_SH} ./getopts1.sub -a -b 
+
+${THIS_SH} ./getopts2.sub -ad -c cval three four five
+
+${THIS_SH} ./getopts3.sub
+
+# make sure that `-b bval' and `-bbval' are equivalent
+${THIS_SH} ./getopts4.sub -a -b bval one two three
+${THIS_SH} ./getopts4.sub -a -bbval one two three
+# this tests `silent' error reporting
+${THIS_SH} ./getopts4.sub -a -b
+${THIS_SH} ./getopts4.sub -a -c
+
+# make sure that `--' can be used to end the list of options
+${THIS_SH} ./getopts4.sub -a -- -b bval one two three
+
+${THIS_SH} ./getopts5.sub -a -c
+
+${THIS_SH} ./getopts6.sub -a
+${THIS_SH} ./getopts6.sub -a -c
+${THIS_SH} ./getopts6.sub -ac
+echo $? # this should be 2
+
+${THIS_SH} ./getopts7.sub -a
+
+${THIS_SH} ./getopts8.sub
+${THIS_SH} ./getopts9.sub
+
+${THIS_SH} ./getopts10.sub
diff --git a/tests/getopts1.sub b/tests/getopts1.sub
new file mode 100644
index 0000000..5145879
--- /dev/null
+++ b/tests/getopts1.sub
@@ -0,0 +1,39 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+aflag=
+bflag=
+
+while getopts ab: name
+do
+	case $name in
+	a)	aflag=1 ;;
+	b)	bflag=1
+		bval=$OPTARG;;
+	?)	echo Usage: $0 [-a] [-b value] args
+		exit 2;;
+	esac
+
+done
+
+if [ ! -z "$aflag" ] ; then echo -a specified ; fi
+if [ ! -z "$bflag" ] ; then echo -b $bval specified ; fi
+
+if [ "$OPTIND" -gt 1 ]
+then
+	shift $(( $OPTIND - 1 ))
+fi
+
+echo remaining args: "$*"
+
+exit 0
diff --git a/tests/getopts10.sub b/tests/getopts10.sub
new file mode 100644
index 0000000..cc8acb0
--- /dev/null
+++ b/tests/getopts10.sub
@@ -0,0 +1,30 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+set -- -a bb
+readonly OPTARG
+getopts :x x
+
+echo OPTARG = $OPTARG x = $x
+
+getopts x x
+echo ${OPTARG-unset} x = $x
+
+typeset -r RO=foo
+typeset -n OPTARG=RO
+
+getopts :x x
+typeset -p RO
+
+getopts x x
+typeset -p RO
diff --git a/tests/getopts2.sub b/tests/getopts2.sub
new file mode 100644
index 0000000..6bb8af5
--- /dev/null
+++ b/tests/getopts2.sub
@@ -0,0 +1,39 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+aflag=
+bflag=
+
+while getopts ab:c:de name "$@"
+do
+	case $name in
+	a)	aflag=1 ;;
+	b)	bflag=1
+		bval=$OPTARG;;
+	c)	cflag=1
+		cval=$OPTARG ;;
+	d)	dflag=1 ;;
+	e)	eflag=1;;
+	?)	echo Usage: $0 [-a] [-b value] [-c value] -[de] args
+		exit 2;;
+	esac
+
+done
+
+[ ! -z "$aflag" ] && echo -a specified
+[ ! -z "$bflag" ] && echo -b $bval specified
+[ ! -z "$cflag" ] && echo -c $cval specified
+[ ! -z "$dflag" ] && echo -d specified
+[ ! -z "$eflag" ] && { echo -n - ; echo e specified; }
+
+exit 0
diff --git a/tests/getopts3.sub b/tests/getopts3.sub
new file mode 100644
index 0000000..6769c49
--- /dev/null
+++ b/tests/getopts3.sub
@@ -0,0 +1,40 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+aflag=
+bflag=
+
+while getopts ab: name -a -b 1 -a -a -a -b 5 -b 3 -a one two three four five
+do
+	case $name in
+	a)	aflag=1 ;;
+	b)	bflag=1
+		bval=$OPTARG;;
+	?)	echo Usage: $0 [-a] [-b value] args
+		exit 2;;
+	esac
+
+done
+
+if [ ! -z "$aflag" ] ; then echo -a specified ; fi
+if [ ! -z "$bflag" ] ; then echo -b $bval specified ; fi
+
+set -- -a -b 1 -a -a -a -b 5 -b 3 -a one two three four five
+if [ "$OPTIND" -gt 1 ]
+then
+	shift $(( $OPTIND - 1 ))
+fi
+
+echo remaining args: "$*"
+
+exit 0
diff --git a/tests/getopts4.sub b/tests/getopts4.sub
new file mode 100644
index 0000000..5fbe954
--- /dev/null
+++ b/tests/getopts4.sub
@@ -0,0 +1,43 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+aflag=
+bflag=
+
+while getopts :ab: name "$@"
+do
+	case $name in
+	a)	aflag=1 ;;
+	b)	bflag=1
+		bval=$OPTARG;;
+	:)	echo $0: error: option \`$OPTARG\' requires an argument
+		echo Usage: $0 [-a] [-b value] args
+		exit 2;;
+	?)	echo $0: error: illegal option character \`$OPTARG\'
+		echo Usage: $0 [-a] [-b value] args
+		exit 2;;
+	esac
+
+done
+
+if [ ! -z "$aflag" ] ; then echo -a specified ; fi
+if [ ! -z "$bflag" ] ; then echo -b $bval specified ; fi
+
+if [ "$OPTIND" -gt 1 ]
+then
+	shift $(( $OPTIND - 1 ))
+fi
+
+echo remaining args: "$*"
+
+exit 0
diff --git a/tests/getopts5.sub b/tests/getopts5.sub
new file mode 100644
index 0000000..bf52310
--- /dev/null
+++ b/tests/getopts5.sub
@@ -0,0 +1,62 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+#Time-stamp: <95/06/07 07:40:40 hrue@imf.unit.no>
+
+getop () {
+
+    local OPTIND=1
+    local OPTERR=1
+
+    echo getop: OPTERR=$OPTERR    
+    while getopts ab arg "$@"; do
+	case $arg in
+	    a)
+		echo a here
+		;;
+	    b)
+		echo b here
+		;;
+	    :|?|*)
+		echo something else here
+		;;
+	esac
+    done
+    echo getop: OPTIND=$OPTIND
+}
+
+OPTIND=
+OPTERR=0
+
+echo OPTERR=$OPTERR
+while getopts ab arg; do
+    case $arg in
+	a)
+	    echo a here
+	    ;;
+	b)
+	    echo b here
+	    ;;
+	:|?|*)
+	    
+	    echo something else here
+	    ;;
+    esac
+done
+
+echo OPTIND=$OPTIND
+
+getop "$@" -d -e
+
+echo OPTIND=$OPTIND
+echo OPTERR=$OPTERR
diff --git a/tests/getopts6.sub b/tests/getopts6.sub
new file mode 100644
index 0000000..d969ece
--- /dev/null
+++ b/tests/getopts6.sub
@@ -0,0 +1,40 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+aflag=
+bflag=
+
+while getopts :ac name "$@"
+do
+	case $name in
+	a)	aflag=1 ;;
+	c)	cflag=1 ;;
+	?)	exit 2;;
+	esac
+
+	# this came in in a bug report -- it's really a usage error
+	# but it shouldn't cause the shell to crash
+	shift
+done
+
+if [ ! -z "$aflag" ] ; then echo -a specified ; fi
+if [ ! -z "$cflag" ] ; then echo -c specified ; fi
+
+if [ "$OPTIND" -gt 1 ]
+then
+	shift $(( $OPTIND - 1 ))
+fi
+
+echo remaining args: "$*"
+
+exit 0
diff --git a/tests/getopts7.sub b/tests/getopts7.sub
new file mode 100644
index 0000000..de7d7a6
--- /dev/null
+++ b/tests/getopts7.sub
@@ -0,0 +1,43 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+aflag=
+bflag=
+
+while getopts :ab: opt-var "$@"
+do
+	case $name in
+	a)	aflag=1 ;;
+	b)	bflag=1
+		bval=$OPTARG;;
+	:)	echo $0: error: option \`$OPTARG\' requires an argument
+		echo Usage: $0 [-a] [-b value] args
+		exit 2;;
+	?)	echo $0: error: illegal option character \`$OPTARG\'
+		echo Usage: $0 [-a] [-b value] args
+		exit 2;;
+	esac
+
+done
+
+if [ ! -z "$aflag" ] ; then echo -a specified ; fi
+if [ ! -z "$bflag" ] ; then echo -b $bval specified ; fi
+
+if [ "$OPTIND" -gt 1 ]
+then
+	shift $(( $OPTIND - 1 ))
+fi
+
+echo remaining args: "$*"
+
+exit 0
diff --git a/tests/getopts8.sub b/tests/getopts8.sub
new file mode 100644
index 0000000..6aeeca6
--- /dev/null
+++ b/tests/getopts8.sub
@@ -0,0 +1,13 @@
+f()
+{
+	typeset OPTIND=1
+	typeset opt
+
+	while getopts ":abcxyz" opt
+	do
+		echo opt: "$opt"
+		if [[ $opt = y ]]; then f -abc ; fi
+	done
+}
+
+f -xyz
diff --git a/tests/getopts9.sub b/tests/getopts9.sub
new file mode 100644
index 0000000..f7dcabc
--- /dev/null
+++ b/tests/getopts9.sub
@@ -0,0 +1,29 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+f()
+{
+	OPTIND=4
+
+	echo \$1 = $1
+}
+
+main()
+{
+while getopts abcdefg opt
+do
+	f $opt
+done
+}
+
+main -abc
diff --git a/tests/glob.right b/tests/glob.right
new file mode 100644
index 0000000..9496690
--- /dev/null
+++ b/tests/glob.right
@@ -0,0 +1,257 @@
+foo/bar foobar/bar
+ok 1
+ok 2
+ok 3
+ok 4
+ok 5
+b
+argv[1] = <A£\B>
+argv[1] = <A>
+argv[1] = <B>
+argv[1] = <a£\b>
+0000000 141 243 134 142
+0000004
+ok 6
+ok 7
+invalid bracket expression
+== LANG=C ==
+[[:alpha:]
+ok 1
+[a
+[[:alpha:]
+ok 2
+ok 2.1
+ok 3
+ok 4
+== LANG=en_US.UTF-8 ==
+[[:alpha:]
+ok 1
+[a
+[[:alpha:]
+ok 2
+ok 2.1
+ok 3
+ok 4
+invalid character class
+== LANG=C ==
+p
+p
+ok 1
+ok 2
+ok 3
+ok 4
+ok 5
+ok 6
+== LANG=en_US.UTF-8 ==
+p
+p
+ok 1
+ok 2
+ok 3
+ok 4
+ok 5
+ok 6
+invalid collating symbols
+== LANG=C ==
+ok 1
+ok 2
+ok 3
+ok 4
+ok 5
+== LANG=en_US.UTF-8 ==
+ok 1
+ok 2
+ok 3
+ok 4
+ok 5
+argv[1] = <a\?>
+a\?
+argv[1] = <a\?>
+a\?
+a\a
+<define\/\
+/>
+./tmp/a/b/c ./tmp/a/b/c ./tmp/a/b/c
+./tmp/a/b/c ./tmp/a/b/c ./tmp/a/b/c
+./tmp/a/b/c
+./tmp/a/b/c
+./tmp\/a/b/c
+./tm[p]\/a/b/c
+./tmp/a/b/c
+argv[1] = <./tmp/a/*>
+argv[1] = <./tmp/a/*>
+argv[1] = <./tmp/a/b/c>
+argv[1] = <./tmp/a/*>
+argv[1] = <./tmp/a/b/c>
+argv[1] = <./t\mp/a/*>
+argv[1] = <./tmp/a/b/c>
+argv[1] = <./tmp/a/>
+argv[1] = <./tmp/a/b/>
+argv[1] = <./t\mp/a/>
+argv[1] = <./t\mp/a/b/>
+argv[1] = <./tmp/a/*>
+argv[1] = <./tmp/a/b/c>
+argv[1] = <./tmp/a>
+argv[1] = <./tmp/a/b*>
+argv[1] = <./tmp/a>
+argv[1] = <./tmp/a/b*>
+argv[1] = <./tmp/>
+argv[1] = <\$foo>
+argv[2] = <\$foo>
+argv[1] = <mixed\$foo/>
+<abcdefg>
+<\.>
+*abc.c
+searchable/\.
+searchable/\./.
+readable/\.
+readable/\./.
+searchable/\.
+readable/\.
+searchable/.
+searchable/.
+searchable/.
+1: [qwe/qwe]
+2: [qwe/
+3: [qwe/]
+4:
+5: [qwe/
+6:
+a\*b
+a\
*b*
+é/*
+é/*
+argv[1] = <a>
+argv[2] = <abc>
+argv[3] = <abd>
+argv[4] = <abe>
+argv[5] = <X*>
+argv[1] = <a>
+argv[2] = <abc>
+argv[3] = <abd>
+argv[4] = <abe>
+argv[1] = <a>
+argv[2] = <abc>
+argv[3] = <abd>
+argv[4] = <abe>
+tmp/l1 tmp/l2 tmp/*4 tmp/l3
+./glob.tests: line 65: no match: tmp/*4
+argv[1] = <bdir/>
+argv[1] = <*>
+argv[1] = <a*>
+argv[1] = <a*>
+argv[1] = <c>
+argv[2] = <ca>
+argv[3] = <cb>
+argv[4] = <a*>
+argv[5] = <*q*>
+argv[1] = <**>
+argv[1] = <**>
+argv[1] = <\.\./*/>
+argv[1] = <s/\..*//>
+argv[1] = </^root:/{s/^[^:]*:[^:]*:\([^:]*\).*$/\1/>
+argv[1] = <abc>
+argv[2] = <abd>
+argv[3] = <abe>
+argv[4] = <bb>
+argv[5] = <cb>
+argv[1] = <abd>
+argv[2] = <abe>
+argv[3] = <bb>
+argv[4] = <bcd>
+argv[5] = <bdir>
+argv[6] = <ca>
+argv[7] = <cb>
+argv[8] = <dd>
+argv[9] = <de>
+argv[1] = <abd>
+argv[2] = <abe>
+argv[1] = <a-b>
+argv[2] = <aXb>
+argv[1] = <Beware>
+argv[2] = <d>
+argv[3] = <dd>
+argv[4] = <de>
+argv[1] = <a*b/ooo>
+argv[1] = <a*b/ooo>
+no match
+not there
+argv[1] = <abc>
+argv[1] = <abc>
+argv[1] = <abc>
+argv[1] = <abc>
+match 1
+match 2
+ok 1
+ok 2
+ok 3
+ok 4
+ok 5
+argv[1] = <man/man1/bash.1>
+argv[1] = <man/man1/bash.1>
+argv[1] = <man/man1/bash.1>
+ok 1
+ok 2
+ok 3
+ok 4
+ok 5
+ok 6
+ok 7
+ok 8
+ok 9
+ok 10
+ok 11
+ok 20
+ok 21
+ok 22
+ok 23
+ok 24
+ok 25
+ok 26
+ok 27
+ok 28
+ok 29
+ok 30
+ok 31
+ok 32
+ok 33
+ok 34
+ok 35
+ok 36
+ok 37
+argv[1] = <b>
+argv[2] = <bb>
+argv[3] = <bcd>
+argv[4] = <bdir>
+argv[1] = <Beware>
+argv[2] = <b>
+argv[3] = <bb>
+argv[4] = <bcd>
+argv[5] = <bdir>
+argv[1] = <Beware>
+argv[2] = <b>
+argv[3] = <bb>
+argv[4] = <bcd>
+argv[5] = <bdir>
+argv[1] = <*>
+argv[1] = <a*b>
+argv[2] = <a-b>
+argv[3] = <aXb>
+argv[4] = <abd>
+argv[5] = <bb>
+argv[6] = <bcd>
+argv[7] = <bdir>
+argv[8] = <ca>
+argv[9] = <cb>
+argv[10] = <dd>
+argv[11] = <man>
+argv[1] = <Beware>
+argv[2] = <abc>
+argv[3] = <abe>
+argv[4] = <bdir>
+argv[5] = <ca>
+argv[6] = <de>
+argv[7] = <man>
+argv[1] = <*>
+argv[1] = <man/man1/bash.1>
+argv[1] = <man/man1/bash.1>
diff --git a/tests/glob.tests b/tests/glob.tests
new file mode 100644
index 0000000..b35d733
--- /dev/null
+++ b/tests/glob.tests
@@ -0,0 +1,409 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+export LC_COLLATE=C
+#
+# test the shell globbing
+#
+expect()
+{
+:	# if needed, change me to echo expect "$@"
+}
+
+# First, a test that bash-2.01.1 fails
+${THIS_SH} ./glob1.sub
+${THIS_SH} ./glob2.sub
+${THIS_SH} ./glob3.sub
+${THIS_SH} ./glob4.sub
+${THIS_SH} ./glob5.sub
+${THIS_SH} ./glob6.sub
+${THIS_SH} ./glob7.sub
+${THIS_SH} ./glob8.sub
+${THIS_SH} ./glob9.sub
+
+MYDIR=$PWD	# save where we are
+
+TESTDIR=$TMPDIR/glob-test-$$
+mkdir $TESTDIR
+builtin cd $TESTDIR || { echo $0: cannot cd to $TESTDIR >&2 ; exit 1; }
+rm -rf *
+
+touch a b c d abc abd abe bb bcd ca cb dd de Beware
+mkdir bdir
+
+# see if `regular' globbing works right
+expect '<a> <abc> <abd> <abe> <X*>'
+recho a* X*
+
+expect '<a> <abc> <abd> <abe>'
+recho \a*
+
+# see if null glob expansion works
+shopt -s nullglob
+
+expect '<a> <abc> <abd> <abe>'
+recho a* X*
+
+shopt -u nullglob
+
+# see if the failglob option works
+
+mkdir tmp
+touch tmp/l1 tmp/l2 tmp/l3
+builtin echo tmp/l[12] tmp/*4 tmp/*3
+shopt -s failglob
+builtin echo tmp/l[12] tmp/*4 tmp/*3
+rm -r tmp
+shopt -u failglob
+
+# see if the code that expands directories only works
+expect '<bdir/>'
+recho b*/
+
+# Test quoted and unquoted globbing characters
+expect '<*>'
+recho \*
+
+expect '<a*>'
+recho 'a*'
+
+expect '<a*>'
+recho a\*
+
+expect '<c> <ca> <cb> <a*> <*q*>'
+recho c* a\* *q*
+
+expect '<**>'
+recho "*"*
+
+expect '<**>'
+recho \**
+
+expect '<\.\./*/>'
+recho "\.\./*/"
+
+expect '<s/\..*//>'
+recho 's/\..*//'
+
+# Pattern from Larry Wall's Configure that caused bash to blow up
+expect '</^root:/{s/^[^:]*:[^:]*:\([^:]*\).*$/\1/>'
+recho "/^root:/{s/^[^:]*:[^:]*:\([^:]*\).*"'$'"/\1/"
+
+# Make sure character classes work properly
+
+expect '<abc> <abd> <abe> <bb> <cb>'
+recho [a-c]b*
+
+expect '<abd> <abe> <bb> <bcd> <bdir> <ca> <cb> <dd> <de>'
+recho [a-y]*[^c]
+
+expect '<abd> <abe>'
+recho a*[^c]
+
+touch a-b aXb
+expect '<a-b> <aXb>'
+recho a[X-]b
+
+touch .x .y
+expect '<Beware> <d> <dd> <de>'
+recho [^a-c]*
+
+# Make sure that filenames with embedded globbing characters are handled
+# properly
+mkdir a\*b
+> a\*b/ooo
+
+expect '<a*b/ooo>'
+recho a\*b/*
+
+expect '<a*b/ooo>'
+recho a\*?/*
+
+expect '<no match>'
+cmd='echo !7'
+case "$cmd" in
+*\\!*) echo match ;;
+*) echo no match ;;
+esac
+
+expect '<not there>'
+file='r.*'
+case $file in
+*.\*) echo not there ;;
+*) echo there ;;
+esac
+
+# examples from the Posix.2 spec (d11.2, p. 243)
+expect '<abc>'
+recho a[b]c
+
+expect '<abc>'
+recho a["b"]c
+
+expect '<abc>'
+recho a[\b]c
+
+expect '<abc>'
+recho a?c
+
+expect '<match 1>'
+case abc in
+a"b"c)	echo 'match 1' ;;
+*)	echo 'BAD match 1' ;;
+esac
+
+expect '<match 2>'
+case abc in
+a*c)	echo 'match 2' ;;
+*)	echo 'BAD match 2' ;;
+esac
+
+expect '<ok 1>'
+case abc in
+"a?c")	echo 'bad 1' ;;
+*)	echo 'ok 1' ;;
+esac
+
+expect '<ok 2>'
+case abc in
+a\*c)	echo 'bad 2' ;;
+*)	echo 'ok 2' ;;
+esac
+
+expect '<ok 3>'
+case abc in
+a\[b]c)	echo 'bad 3' ;;
+*)	echo 'ok 3' ;;
+esac
+
+expect '<ok 4>'
+case "$nosuchvar" in
+"") 	echo 'ok 4' ;;
+*)	echo 'bad 4' ;;
+esac
+
+# This is very odd, but sh and ksh seem to agree
+expect '<ok 5>'
+case abc in
+a["\b"]c) echo 'ok 5' ;;
+*)	echo 'bad 5' ;;
+esac
+
+mkdir man
+mkdir man/man1
+touch man/man1/bash.1
+expect '<man/man1/bash.1>'
+recho */man*/bash.*
+expect '<man/man1/bash.1>'
+recho $(echo */man*/bash.*)
+expect '<man/man1/bash.1>'
+recho "$(echo */man*/bash.*)"
+
+# tests with multiple `*'s
+case abc in
+a***c)	echo ok 1;;
+esac
+
+case abc in
+a*****?c)	echo ok 2;;
+esac
+
+case abc in
+?*****??)	echo ok 3;;
+esac
+
+case abc in
+*****??)	echo ok 4;;
+esac
+
+case abc in
+*****??c)	echo ok 5;;
+esac
+
+case abc in
+?*****?c)	echo ok 6;;
+esac
+
+case abc in
+?***?****c)	echo ok 7;;
+esac
+
+case abc in
+?***?****?)	echo ok 8;;
+esac
+
+case abc in
+?***?****)	echo ok 9;;
+esac
+
+case abc in
+*******c)	echo ok 10;;
+esac
+
+case abc in
+*******?)	echo ok 11;;
+esac
+
+case abcdecdhjk in
+a*cd**?**??k)	echo ok 20;;
+esac
+
+case abcdecdhjk in
+a**?**cd**?**??k)	echo ok 21;;
+esac
+
+case abcdecdhjk in
+a**?**cd**?**??k***)	echo ok 22;;
+esac
+
+case abcdecdhjk in
+a**?**cd**?**??***k)	echo ok 23;;
+esac
+
+case abcdecdhjk in
+a**?**cd**?**??***k**)	echo ok 24;;
+esac
+
+case abcdecdhjk in
+a****c**?**??*****)	echo ok 25;;
+esac
+
+case '-' in
+[-abc])	echo ok 26 ;;
+esac
+
+case '-' in
+[abc-]) echo ok 27 ;;
+esac
+
+case '\' in
+\\)	echo ok 28 ;;
+esac
+
+case '\' in
+[\\])	echo ok 29 ;;
+esac
+
+case '\' in
+'\')	echo ok 30 ;;
+esac
+
+case '[' in
+[[])	echo ok 31 ;;
+esac
+
+# a `[' without a closing `]' is just another character to match, in the
+# bash implementation
+case '[' in
+[)	echo ok 32 ;;
+esac
+
+case '[abc' in
+[*)	echo 'ok 33';;
+esac
+
+# a right bracket shall lose its special meaning and represent itself in
+# a bracket expression if it occurs first in the list.  -- POSIX.2 2.8.3.2
+case ']' in
+[]])	echo ok 34 ;;
+esac
+
+case '-' in
+[]-])	echo ok 35 ;;
+esac
+
+# a backslash should just escape the next character in this context
+case p in
+[a-\z])	echo ok 36 ;;
+esac
+
+# this was a bug in all versions up to bash-2.04-release
+case "/tmp" in
+[/\\]*) echo ok 37 ;;
+esac
+
+# none of these should output anything
+
+case abc in
+??**********?****?)	echo bad 1;;
+esac
+
+case abc in
+??**********?****c)	echo bad 2;;
+esac
+
+case abc in
+?************c****?****)	echo bad 3;;
+esac
+
+case abc in
+*c*?**)	echo bad 4;;
+esac
+
+case abc in
+a*****c*?**)	echo bad 5;;
+esac
+
+case abc in
+a********???*******)	echo bad 6;;
+esac
+
+case 'a' in
+[])	echo bad 7 ;;
+esac
+
+case '[' in
+[abc)	echo bad 8;;
+esac
+
+# let's start testing the case-insensitive globbing code
+recho b*
+
+shopt -s nocaseglob
+recho b*
+
+recho [b]*
+shopt -u nocaseglob
+
+# make sure set -f works right
+set -f
+recho *
+set +f
+
+# test out the GLOBIGNORE code
+GLOBIGNORE='.*:*c:*e:?'
+recho *
+
+GLOBIGNORE='.*:*b:*d:?'
+recho *
+
+# see if GLOBIGNORE can substitute for `set -f'
+GLOBIGNORE='.*:*'
+recho *
+
+unset GLOBIGNORE
+expect '<man/man1/bash.1>'
+recho */man*/bash.*
+
+# make sure null values for GLOBIGNORE have no effect
+GLOBIGNORE=
+expect '<man/man1/bash.1>'
+recho */man*/bash.*
+
+# this is for the benefit of pure coverage, so it writes the pcv file
+# in the right place, and for gprof
+builtin cd $MYDIR
+
+rm -rf $TESTDIR
+
+exit 0
diff --git a/tests/glob1.sub b/tests/glob1.sub
new file mode 100644
index 0000000..27c216b
--- /dev/null
+++ b/tests/glob1.sub
@@ -0,0 +1,30 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# bash-2.01.1 failed this test
+: ${TMPDIR:=/var/tmp}
+
+FN=$TMPDIR/bash-glob.$$
+mkdir $FN
+cd $FN
+
+mkdir foo
+mkdir foobar
+touch foo/bar
+touch foobar/bar
+chmod 311 foo foobar
+echo f*/bar
+
+chmod 777 foo foobar
+cd $OLDPWD
+rm -rf $FN
diff --git a/tests/glob2.sub b/tests/glob2.sub
new file mode 100644
index 0000000..cabc350
--- /dev/null
+++ b/tests/glob2.sub
@@ -0,0 +1,57 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+. ./test-glue-functions
+
+var='ab\'
+
+case $var in
+ab\\)	echo ok 1;;
+*)	echo bad 1;;
+esac
+
+case $var in
+$var)	echo ok 2;;
+*)	echo bad 2;;
+esac
+
+case $var in
+'ab\')	echo ok 3;;
+*)	echo bad 3;;
+esac
+
+[[ $var = $var ]] && echo ok 4
+[[ $var = $'ab\134' ]] && echo ok 5
+
+LC_ALL=zh_HK.big5hkscs
+
+read a b c <<< $'\u3b1 b c\n'
+echo $b
+unset a b c
+
+export alpha=$'\u3b1'
+
+printf -v v 'A%sB' "$alpha" 
+recho "$v"
+IFS=$alpha read a b c <<<"$v"
+recho "$a"
+recho "$b"
+unset a b v
+
+recho "a${alpha}b"
+printf "%s" "a${alpha}b" | LC_ALL=C od -b | _intl_normalize_spaces
+
+a=$'\u3b1'
+[[ $a = $a ]] && echo ok 6
+
+LC_ALL=zh_HK.big5hkscs ${THIS_SH} -c $'[[ \u3b1 = \u3b1 ]]' && echo ok 7
diff --git a/tests/glob3.sub b/tests/glob3.sub
new file mode 100644
index 0000000..662c65e
--- /dev/null
+++ b/tests/glob3.sub
@@ -0,0 +1,163 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+: ${TMPDIR:=/var/tmp}
+
+TESTDIR=${TMPDIR}/glob-test-$$
+mkdir ${TESTDIR}
+cd $TESTDIR ||  {
+        echo "$TESTDIR: cannot cd" >&2
+        exit 1
+}
+
+matchfunc()
+{
+	echo == LANG=$LANG ==
+
+	touch a p
+	echo [[:alpha:]
+	rm a p
+
+	case l in
+	[[:alpha:])	echo bad 1;;
+	*)		echo ok 1;;
+	esac
+
+	touch '[a' '[x'
+	echo [[:alpha:]
+	rm '[a'
+	echo [[:alpha:]
+	rm '[x'
+
+	case [a in
+	[[:alpha:])	echo ok 2;;
+	*)		echo bad 2;;
+	esac
+
+	case x in
+	[[:aeioux:])	echo bad 2.1 ;;
+	*)		echo ok 2.1 ;;
+	esac
+
+	case [x in
+	[[:alpha:])	echo bad 3;;
+	*)		echo ok 3;;
+	esac
+
+	# unclosed bracket char class expression just matches against ":alpha"
+	case a in
+	[[:alpha])	echo ok 4;;
+	*)		echo bad 4;;
+	esac
+}
+
+echo invalid bracket expression
+export LANG=C
+matchfunc
+
+export LANG=en_US.UTF-8
+matchfunc
+
+unset -f matchfunc
+
+matchfunc()
+{
+	echo == LANG=$LANG ==
+
+	touch p
+	# quoted character classes work as if they were unquoted now
+	echo [[:alpha:]]
+	echo [[:"alpha":]]
+	rm -f p
+
+	case a] in
+	[[:aleph:]])	echo bad 1;;
+	*)		echo ok 1;;
+	esac
+
+	case a in
+	[[:aleph:]])	echo bad 2;;
+	*)		echo ok 2;;
+	esac
+
+	case a] in
+	[[:"alpha":]])	echo bad 3;;
+	*)		echo ok 3;;
+	esac
+
+	# Posix says quoted character class names work now
+	case x in
+	[[:"alpha":]])	echo ok 4;;
+	*)		echo bad 4;;
+	esac
+
+	case a in
+	[abc[:foo:]])	echo ok 5;;
+	*)		echo bad 5 ;;
+	esac
+
+	case a in
+	[[:foo:]abc])	echo ok 6;;
+	*)		echo bad 6 ;;
+	esac
+}
+
+echo invalid character class
+export LANG=C
+matchfunc
+
+export LANG=en_US.UTF-8
+matchfunc
+
+unset -f matchfunc
+
+matchfunc()
+{
+	echo == LANG=$LANG ==
+
+	case h in
+	[[.hyphen.])	echo bad 1;;
+	*)		echo ok 1;;
+	esac
+
+	case - in
+	[[.hyphen.]])	echo ok 2;;
+	*)		echo bad 2;;
+	esac
+
+	case slash in
+	[[.slash.]])	echo bad 3;;
+	*)		echo ok 3;;
+	esac
+
+	case a in
+	[abc[.nonsense.]])	echo ok 4;;
+	*)		echo bad 4 ;;
+	esac
+
+	case a in
+	[[.nonsense.]abc])	echo ok 5;;
+	*)		echo bad 5 ;;
+	esac
+}
+
+echo invalid collating symbols
+
+export LANG=C
+matchfunc
+
+export LANG=en_US.UTF-8
+matchfunc
+
+cd $OLDPWD
+rm -rf $TESTDIR
diff --git a/tests/glob4.sub b/tests/glob4.sub
new file mode 100644
index 0000000..779c854
--- /dev/null
+++ b/tests/glob4.sub
@@ -0,0 +1,41 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+: ${TMPDIR:=/var/tmp}
+
+FN=$TMPDIR/bash-glob.$$
+mkdir $FN || { echo "glob4.sub: cannot mkdir $FN" >&2 ; exit 1; }
+builtin cd $FN || { echo "glob4.sub: cannot change directory to $FN" >&2 ; exit 1; }
+rm -f *
+
+touch 'a?' aa
+
+set -- a \?; IFS=\\; var=$*;
+recho "$var"
+unset IFS; printf "%s\n" ${var}
+
+var='a\?'
+recho "$var"
+printf "%s\n" ${var}
+
+var='a\a'
+printf "%s\n" ${var}
+
+# shell's idea of a glob pattern and libglob's idea of a glob pattern have to
+# be identical
+PRE='\/'
+printf '<%s>\n' 'define'${PRE}'\
+/'
+
+builtin cd $OLDPWD
+rm -rf $FN
diff --git a/tests/glob5.sub b/tests/glob5.sub
new file mode 100644
index 0000000..5735715
--- /dev/null
+++ b/tests/glob5.sub
@@ -0,0 +1,76 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+ORIGD=$PWD
+: ${TMPDIR:=/var/tmp}
+
+SD=$TMPDIR/bash-glob-$$
+[ -d $SD ] || mkdir $SD
+builtin cd $SD || { echo "glob5.sub: cannot change directory to $SD" >&2 ; exit 1; }
+mkdir tmp
+
+D=./tmp/a
+D1='./t\mp/a'
+
+mkdir -m700 ./tmp/a ./tmp/a/b
+touch ./tmp/a/b/c
+
+echo ./tmp/a/b/* "./tmp/a/"b/* "./tmp/a/b"/*
+
+chmod -r ./tmp/a            
+echo ./tmp/a/b/* "./tmp/a/"b/* "./tmp/a/b"/*
+echo "./tmp/a/b"/*
+
+bs=\\
+echo ./tmp${bs}/a/b/*
+echo ./tmp${bs}/a/b/c
+echo ./tm[p]${bs}/a/b/c
+echo ./t${bs}mp/a/b/*
+
+recho "./tmp/a"/*
+recho "$D"/*
+recho "$D"/b/*
+
+recho $D/*
+recho $D/b/*
+recho $D1/*
+recho $D1/b/*
+recho $D/
+recho $D/b/
+recho $D1/
+recho $D1/b/
+
+recho ./t\mp/a/*
+recho ./t\mp/a/b/*
+
+recho ./tmp/a*
+recho ./tmp/a/b*
+recho ./t\mp/a*
+recho ./t\mp/a/b*
+
+recho ./t\mp/
+
+chmod +r ./tmp/a
+rm -rf ./tmp/a
+
+a='$foo'
+b='$bar'
+a=$(echo "$a" | sed 's/\$/\\$/g')
+
+recho $a "$a"
+recho 'mixed'$a/
+
+unset a b
+
+cd $ORIGD
+rm -rf $SD
diff --git a/tests/glob6.sub b/tests/glob6.sub
new file mode 100644
index 0000000..f26ae4d
--- /dev/null
+++ b/tests/glob6.sub
@@ -0,0 +1,68 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# tests of the backslash-in-glob-patterns discussion on the austin-group ML
+
+: ${TMPDIR:=/var/tmp}
+
+ORIG=$PWD
+GLOBDIR=$TMPDIR/bash-glob-$$
+mkdir $GLOBDIR || { echo "glob6.sub: cannot make directory $GLOBDIR" >&2 ; exit 1; }
+builtin cd $GLOBDIR || { echo "glob6.sub: cannot change directory to $GLOBDIR" >&2 ; exit 1; }
+
+# does the pattern matcher allow backslashes as escape characters and remove
+# them as part of matching?
+touch abcdefg
+pat='ab\cd*'
+printf '<%s>\n' $pat
+pat='\.'
+printf '<%s>\n' $pat
+rm abcdefg
+
+# how about when escaping pattern characters?
+touch '*abc.c'
+a='\**.c'
+printf '%s\n' $a
+rm -f '*abc.c'
+
+# how about when making the distinction between readable and searchable path
+# components?
+mkdir -m a=x searchable
+mkdir -m a=r readable
+
+p='searchable/\.'
+printf "%s\n" $p
+
+p='searchable/\./.'
+printf "%s\n" $p
+
+p='readable/\.'
+printf "%s\n" $p
+
+p='readable/\./.'
+printf "%s\n" $p
+
+printf "%s\n" 'searchable/\.'
+printf "%s\n" 'readable/\.'
+
+echo */.
+
+p='*/\.'
+echo $p
+
+echo */'.'
+
+rmdir searchable readable
+
+cd $ORIG
+rmdir $GLOBDIR
diff --git a/tests/glob7.sub b/tests/glob7.sub
new file mode 100644
index 0000000..0212b8e
--- /dev/null
+++ b/tests/glob7.sub
@@ -0,0 +1,11 @@
+# according to Posix 2.13.3, a slash in a bracket expression renders that
+# bracket expression invalid
+shopt -s nullglob
+
+echo 1: [qwe/qwe]
+echo 2: [qwe/
+echo 3: [qwe/]
+
+echo 4: [qwe\/qwe]
+echo 5: [qwe\/
+echo 6: [qwe\/]
diff --git a/tests/glob8.sub b/tests/glob8.sub
new file mode 100644
index 0000000..dca54fc
--- /dev/null
+++ b/tests/glob8.sub
@@ -0,0 +1,31 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+: ${TMPDIR:=/var/tmp}
+
+TESTDIR=${TMPDIR}/glob-test-$$
+mkdir ${TESTDIR}
+cd $TESTDIR ||  {
+        echo "$TESTDIR: cannot cd" >&2
+        exit 1
+}
+
+trap 'cd $OLDPWD && rm -rf $TESTDIR' EXIT
+
+var='a\'
+touch 'a*b' 'a\*b'
+
+printf '%s\n' $var\*b*
+
+var1=a\\$'\001'
+printf '%s\n' $var1\*b*
diff --git a/tests/glob9.sub b/tests/glob9.sub
new file mode 100644
index 0000000..ef2af2b
--- /dev/null
+++ b/tests/glob9.sub
@@ -0,0 +1,13 @@
+LANG=en_US.UTF-8	# safest
+: ${TMPDIR:=/var/tmp}
+HOME=${TMPDIR}
+
+mkdir ~/ಇಳಿಕೆಗಳ�
+touch ~/ಇಳಿಕೆಗಳ�/{a,b}.txt
+echo ~/ಇಳಿಕೆಗಳ�/*.txt >/dev/null
+
+rm -rf ${TMPDIR}/ಇಳಿಕೆಗಳ�
+
+LC_ALL=en_US.UTF-8 LANG=en_US.UTF-8
+echo é/*
+echo 'é'/*
diff --git a/tests/globstar.right b/tests/globstar.right
new file mode 100644
index 0000000..c8211bc
--- /dev/null
+++ b/tests/globstar.right
@@ -0,0 +1,587 @@
+lib/glob/glob.o
+lib/glob/smatch.o
+lib/glob/strmatch.o
+lib/readline/bind.o
+lib/readline/callback.o
+lib/readline/compat.o
+lib/readline/complete.o
+lib/readline/display.o
+lib/sh/casemod.o
+lib/sh/clktck.o
+lib/sh/clock.o
+lib/sh/eaccess.o
+lib/sh/fdprintf.o
+lib/sh/fmtullong.o
+lib/sh/fmtulong.o
+lib/sh/fmtumax.o
+lib/sh/fpurge.o
+lib/sh/getenv.o
+lib/sh/input_avail.o
+lib/sh/itos.o
+
+lib/:
+glob
+readline
+sh
+
+lib/glob:
+glob.o
+smatch.o
+strmatch.o
+
+lib/readline:
+bind.o
+callback.o
+compat.o
+complete.o
+display.o
+
+lib/sh:
+casemod.o
+clktck.o
+clock.o
+eaccess.o
+fdprintf.o
+fmtullong.o
+fmtulong.o
+fmtumax.o
+fpurge.o
+getenv.o
+input_avail.o
+itos.o
+lib/glob/glob.o
+lib/glob/smatch.o
+lib/glob/strmatch.o
+lib/readline/bind.o
+lib/readline/callback.o
+lib/readline/compat.o
+lib/readline/complete.o
+lib/readline/display.o
+lib/sh/casemod.o
+lib/sh/clktck.o
+lib/sh/clock.o
+lib/sh/eaccess.o
+lib/sh/fdprintf.o
+lib/sh/fmtullong.o
+lib/sh/fmtulong.o
+lib/sh/fmtumax.o
+lib/sh/fpurge.o
+lib/sh/getenv.o
+lib/sh/input_avail.o
+lib/sh/itos.o
+alias.o builtins/history.o builtins/jobs.o builtins/kill.o builtins/let.o builtins/mapfile.o lib/glob/glob.o lib/glob/smatch.o lib/glob/strmatch.o lib/readline/bind.o lib/readline/callback.o lib/readline/compat.o lib/readline/complete.o lib/readline/display.o lib/sh/casemod.o lib/sh/clktck.o lib/sh/clock.o lib/sh/eaccess.o lib/sh/fdprintf.o lib/sh/fmtullong.o lib/sh/fmtulong.o lib/sh/fmtumax.o lib/sh/fpurge.o lib/sh/getenv.o lib/sh/input_avail.o lib/sh/itos.o pcomplib.o print_cmd.o redir.o shell.o sig.o stringlib.o subst.o syntax.o test.o trap.o unwind_prot.o variables.o version.o xmalloc.o y.tab.o
+alias.o
+builtins/history.o
+builtins/jobs.o
+builtins/kill.o
+builtins/let.o
+builtins/mapfile.o
+lib/glob/glob.o
+lib/glob/smatch.o
+lib/glob/strmatch.o
+lib/readline/bind.o
+lib/readline/callback.o
+lib/readline/compat.o
+lib/readline/complete.o
+lib/readline/display.o
+lib/sh/casemod.o
+lib/sh/clktck.o
+lib/sh/clock.o
+lib/sh/eaccess.o
+lib/sh/fdprintf.o
+lib/sh/fmtullong.o
+lib/sh/fmtulong.o
+lib/sh/fmtumax.o
+lib/sh/fpurge.o
+lib/sh/getenv.o
+lib/sh/input_avail.o
+lib/sh/itos.o
+pcomplib.o
+print_cmd.o
+redir.o
+shell.o
+sig.o
+stringlib.o
+subst.o
+syntax.o
+test.o
+trap.o
+unwind_prot.o
+variables.o
+version.o
+xmalloc.o
+y.tab.o
+
+builtins:
+history.o
+jobs.o
+kill.o
+let.o
+mapfile.o
+
+lib:
+glob
+readline
+sh
+
+lib/glob:
+glob.o
+smatch.o
+strmatch.o
+
+lib/readline:
+bind.o
+callback.o
+compat.o
+complete.o
+display.o
+
+lib/sh:
+casemod.o
+clktck.o
+clock.o
+eaccess.o
+fdprintf.o
+fmtullong.o
+fmtulong.o
+fmtumax.o
+fpurge.o
+getenv.o
+input_avail.o
+itos.o
+alias.o builtins builtins/history.o builtins/jobs.o builtins/kill.o builtins/let.o builtins/mapfile.o lib lib/glob lib/glob/glob.o lib/glob/smatch.o lib/glob/strmatch.o lib/readline lib/readline/bind.o lib/readline/callback.o lib/readline/compat.o lib/readline/complete.o lib/readline/display.o lib/sh lib/sh/casemod.o lib/sh/clktck.o lib/sh/clock.o lib/sh/eaccess.o lib/sh/fdprintf.o lib/sh/fmtullong.o lib/sh/fmtulong.o lib/sh/fmtumax.o lib/sh/fpurge.o lib/sh/getenv.o lib/sh/input_avail.o lib/sh/itos.o pcomplib.o print_cmd.o redir.o shell.o sig.o stringlib.o subst.o syntax.o test.o trap.o unwind_prot.o variables.o version.o xmalloc.o y.tab.o
+bar/foo foo
+bar/foo/ foo/
+bar/foo/e bar/foo/f foo/a foo/b
+<a>
+<a/a>
+<a/a/a>
+<a>
+<a/a>
+<a/a/a>
+<a>
+<a/a>
+<a/a/a>
+== <**/a> ==
+<a>
+<a/a>
+<a/a/a>
+<a/a/a/a>
+<a/a/b/a>
+<a/b/a>
+<a/b/a/a>
+<a/b/b/a>
+<b/a>
+<b/a/a>
+<b/a/a/a>
+<b/a/b/a>
+<b/b/a>
+<b/b/a/a>
+<b/b/b/a>
+== <a/**> ==
+<a/>
+<a/a>
+<a/a/a>
+<a/a/a/a>
+<a/a/a/b>
+<a/a/b>
+<a/a/b/a>
+<a/a/b/b>
+<a/b>
+<a/b/a>
+<a/b/a/a>
+<a/b/a/b>
+<a/b/b>
+<a/b/b/a>
+<a/b/b/b>
+== <**> ==
+<a>
+<a/a>
+<a/a/a>
+<a/a/a/a>
+<a/a/a/b>
+<a/a/b>
+<a/a/b/a>
+<a/a/b/b>
+<a/b>
+<a/b/a>
+<a/b/a/a>
+<a/b/a/b>
+<a/b/b>
+<a/b/b/a>
+<a/b/b/b>
+<b>
+<b/a>
+<b/a/a>
+<b/a/a/a>
+<b/a/a/b>
+<b/a/b>
+<b/a/b/a>
+<b/a/b/b>
+<b/b>
+<b/b/a>
+<b/b/a/a>
+<b/b/a/b>
+<b/b/b>
+<b/b/b/a>
+<b/b/b/b>
+== <**/**> ==
+<a>
+<a/a>
+<a/a/a>
+<a/a/a/a>
+<a/a/a/b>
+<a/a/b>
+<a/a/b/a>
+<a/a/b/b>
+<a/b>
+<a/b/a>
+<a/b/a/a>
+<a/b/a/b>
+<a/b/b>
+<a/b/b/a>
+<a/b/b/b>
+<b>
+<b/a>
+<b/a/a>
+<b/a/a/a>
+<b/a/a/b>
+<b/a/b>
+<b/a/b/a>
+<b/a/b/b>
+<b/b>
+<b/b/a>
+<b/b/a/a>
+<b/b/a/b>
+<b/b/b>
+<b/b/b/a>
+<b/b/b/b>
+== <**/**/**> ==
+<a>
+<a/a>
+<a/a/a>
+<a/a/a/a>
+<a/a/a/b>
+<a/a/b>
+<a/a/b/a>
+<a/a/b/b>
+<a/b>
+<a/b/a>
+<a/b/a/a>
+<a/b/a/b>
+<a/b/b>
+<a/b/b/a>
+<a/b/b/b>
+<b>
+<b/a>
+<b/a/a>
+<b/a/a/a>
+<b/a/a/b>
+<b/a/b>
+<b/a/b/a>
+<b/a/b/b>
+<b/b>
+<b/b/a>
+<b/b/a/a>
+<b/b/a/b>
+<b/b/b>
+<b/b/b/a>
+<b/b/b/b>
+== <**/**/**/**/**> ==
+<a>
+<a/a>
+<a/a/a>
+<a/a/a/a>
+<a/a/a/b>
+<a/a/b>
+<a/a/b/a>
+<a/a/b/b>
+<a/b>
+<a/b/a>
+<a/b/a/a>
+<a/b/a/b>
+<a/b/b>
+<a/b/b/a>
+<a/b/b/b>
+<b>
+<b/a>
+<b/a/a>
+<b/a/a/a>
+<b/a/a/b>
+<b/a/b>
+<b/a/b/a>
+<b/a/b/b>
+<b/b>
+<b/b/a>
+<b/b/a/a>
+<b/b/a/b>
+<b/b/b>
+<b/b/b/a>
+<b/b/b/b>
+== <**/**/a> ==
+<a>
+<a/a>
+<a/a/a>
+<a/a/a/a>
+<a/a/b/a>
+<a/b/a>
+<a/b/a/a>
+<a/b/b/a>
+<b/a>
+<b/a/a>
+<b/a/a/a>
+<b/a/b/a>
+<b/b/a>
+<b/b/a/a>
+<b/b/b/a>
+== <a/**/**> ==
+<a>
+<a/a>
+<a/a/a>
+<a/a/a/a>
+<a/a/a/b>
+<a/a/b>
+<a/a/b/a>
+<a/a/b/b>
+<a/b>
+<a/b/a>
+<a/b/a/a>
+<a/b/a/b>
+<a/b/b>
+<a/b/b/a>
+<a/b/b/b>
+== <a/**/**/**> ==
+<a>
+<a/a>
+<a/a/a>
+<a/a/a/a>
+<a/a/a/b>
+<a/a/b>
+<a/a/b/a>
+<a/a/b/b>
+<a/b>
+<a/b/a>
+<a/b/a/a>
+<a/b/a/b>
+<a/b/b>
+<a/b/b/a>
+<a/b/b/b>
+== <a/**/**/**/**> ==
+<a>
+<a/a>
+<a/a/a>
+<a/a/a/a>
+<a/a/a/b>
+<a/a/b>
+<a/a/b/a>
+<a/a/b/b>
+<a/b>
+<a/b/a>
+<a/b/a/a>
+<a/b/a/b>
+<a/b/b>
+<a/b/b/a>
+<a/b/b/b>
+== <**/a/**> ==
+<a>
+<a/a>
+<a/a>
+<a/a/a>
+<a/a/a>
+<a/a/a>
+<a/a/a/a>
+<a/a/a/a>
+<a/a/a/a>
+<a/a/a/a>
+<a/a/a/b>
+<a/a/a/b>
+<a/a/a/b>
+<a/a/b>
+<a/a/b>
+<a/a/b/a>
+<a/a/b/a>
+<a/a/b/a>
+<a/a/b/b>
+<a/a/b/b>
+<a/b>
+<a/b/a>
+<a/b/a>
+<a/b/a/a>
+<a/b/a/a>
+<a/b/a/a>
+<a/b/a/b>
+<a/b/a/b>
+<a/b/b>
+<a/b/b/a>
+<a/b/b/a>
+<a/b/b/b>
+<b/a>
+<b/a/a>
+<b/a/a>
+<b/a/a/a>
+<b/a/a/a>
+<b/a/a/a>
+<b/a/a/b>
+<b/a/a/b>
+<b/a/b>
+<b/a/b/a>
+<b/a/b/a>
+<b/a/b/b>
+<b/b/a>
+<b/b/a/a>
+<b/b/a/a>
+<b/b/a/b>
+<b/b/b/a>
+== <**/a/**/**> ==
+<a>
+<a/a>
+<a/a>
+<a/a/a>
+<a/a/a>
+<a/a/a>
+<a/a/a/a>
+<a/a/a/a>
+<a/a/a/a>
+<a/a/a/a>
+<a/a/a/b>
+<a/a/a/b>
+<a/a/a/b>
+<a/a/b>
+<a/a/b>
+<a/a/b/a>
+<a/a/b/a>
+<a/a/b/a>
+<a/a/b/b>
+<a/a/b/b>
+<a/b>
+<a/b/a>
+<a/b/a>
+<a/b/a/a>
+<a/b/a/a>
+<a/b/a/a>
+<a/b/a/b>
+<a/b/a/b>
+<a/b/b>
+<a/b/b/a>
+<a/b/b/a>
+<a/b/b/b>
+<b/a>
+<b/a/a>
+<b/a/a>
+<b/a/a/a>
+<b/a/a/a>
+<b/a/a/a>
+<b/a/a/b>
+<b/a/a/b>
+<b/a/b>
+<b/a/b/a>
+<b/a/b/a>
+<b/a/b/b>
+<b/b/a>
+<b/b/a/a>
+<b/b/a/a>
+<b/b/a/b>
+<b/b/b/a>
+== <**/a/**/**/**> ==
+<a>
+<a/a>
+<a/a>
+<a/a/a>
+<a/a/a>
+<a/a/a>
+<a/a/a/a>
+<a/a/a/a>
+<a/a/a/a>
+<a/a/a/a>
+<a/a/a/b>
+<a/a/a/b>
+<a/a/a/b>
+<a/a/b>
+<a/a/b>
+<a/a/b/a>
+<a/a/b/a>
+<a/a/b/a>
+<a/a/b/b>
+<a/a/b/b>
+<a/b>
+<a/b/a>
+<a/b/a>
+<a/b/a/a>
+<a/b/a/a>
+<a/b/a/a>
+<a/b/a/b>
+<a/b/a/b>
+<a/b/b>
+<a/b/b/a>
+<a/b/b/a>
+<a/b/b/b>
+<b/a>
+<b/a/a>
+<b/a/a>
+<b/a/a/a>
+<b/a/a/a>
+<b/a/a/a>
+<b/a/a/b>
+<b/a/a/b>
+<b/a/b>
+<b/a/b/a>
+<b/a/b/a>
+<b/a/b/b>
+<b/b/a>
+<b/b/a/a>
+<b/b/a/a>
+<b/b/a/b>
+<b/b/b/a>
+== <**/**/a/**> ==
+<a>
+<a/a>
+<a/a>
+<a/a/a>
+<a/a/a>
+<a/a/a>
+<a/a/a/a>
+<a/a/a/a>
+<a/a/a/a>
+<a/a/a/a>
+<a/a/a/b>
+<a/a/a/b>
+<a/a/a/b>
+<a/a/b>
+<a/a/b>
+<a/a/b/a>
+<a/a/b/a>
+<a/a/b/a>
+<a/a/b/b>
+<a/a/b/b>
+<a/b>
+<a/b/a>
+<a/b/a>
+<a/b/a/a>
+<a/b/a/a>
+<a/b/a/a>
+<a/b/a/b>
+<a/b/a/b>
+<a/b/b>
+<a/b/b/a>
+<a/b/b/a>
+<a/b/b/b>
+<b/a>
+<b/a/a>
+<b/a/a>
+<b/a/a/a>
+<b/a/a/a>
+<b/a/a/a>
+<b/a/a/b>
+<b/a/a/b>
+<b/a/b>
+<b/a/b/a>
+<b/a/b/a>
+<b/a/b/b>
+<b/b/a>
+<b/b/a/a>
+<b/b/a/a>
+<b/b/a/b>
+<b/b/b/a>
+a a/aa a/ab b b/bb b/bc c
+a/ b/ c/
+a/ab b b/bb
diff --git a/tests/globstar.tests b/tests/globstar.tests
new file mode 100644
index 0000000..33714b4
--- /dev/null
+++ b/tests/globstar.tests
@@ -0,0 +1,56 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+: ${TMPDIR:=/var/tmp}
+dir=$PWD
+
+shopt -s globstar
+
+export LANG=C LC_ALL=C LC_COLLATE=C
+
+GDIR=$TMPDIR/globstar-$$
+
+mkdir $GDIR || exit 1
+cd $GDIR || exit 1
+
+mkdir lib builtins
+mkdir lib/glob lib/readline lib/sh
+
+touch builtins/history.o builtins/jobs.o builtins/kill.o builtins/let.o builtins/mapfile.o
+touch lib/glob/glob.o lib/glob/smatch.o lib/glob/strmatch.o
+touch lib/readline/bind.o lib/readline/callback.o lib/readline/compat.o lib/readline/complete.o lib/readline/display.o
+
+touch lib/sh/casemod.o lib/sh/clktck.o lib/sh/clock.o lib/sh/eaccess.o
+touch lib/sh/fdprintf.o lib/sh/fmtullong.o lib/sh/fmtulong.o lib/sh/fmtumax.o
+touch lib/sh/fpurge.o lib/sh/getenv.o lib/sh/input_avail.o lib/sh/itos.o
+
+touch alias.o
+touch pcomplib.o print_cmd.o redir.o shell.o sig.o stringlib.o subst.o syntax.o
+touch test.o trap.o unwind_prot.o variables.o version.o xmalloc.o y.tab.o
+
+ls lib/**
+
+ls lib/**/*.o
+
+echo **/*.o
+
+ls **
+
+echo **
+
+cd $dir
+rm -rf $GDIR
+
+${THIS_SH} ./globstar1.sub
+${THIS_SH} ./globstar2.sub
+${THIS_SH} ./globstar3.sub
diff --git a/tests/globstar1.sub b/tests/globstar1.sub
new file mode 100644
index 0000000..7097f5d
--- /dev/null
+++ b/tests/globstar1.sub
@@ -0,0 +1,34 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+shopt -s globstar
+wdir=$PWD
+
+: ${TMPDIR:=/var/tmp}
+DIR=$TMPDIR/globstar-$$
+mkdir -p $DIR
+cd $DIR || {
+	echo "$DIR: cannot cd" >&2
+	exit 1
+}
+mkdir -p foo/{a,b} bar/{c,d,foo/{e,f}} baz/{g,h}
+
+
+echo **/foo*
+
+echo **/foo*/
+
+echo **/foo*/*
+
+cd $wdir
+rm -rf $DIR
diff --git a/tests/globstar2.sub b/tests/globstar2.sub
new file mode 100644
index 0000000..ccf413b
--- /dev/null
+++ b/tests/globstar2.sub
@@ -0,0 +1,97 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+olddir=$PWD
+: ${TMPDIR:=/var/tmp}
+EMPTY=$TMPDIR/empty
+
+shopt -s globstar
+s()
+{
+  printf '== <%s> ==\n' "$@"
+}
+p()
+{
+  printf '<%q>\n' "$@"
+}
+
+mkdir -p $EMPTY/a/a/a
+cd $EMPTY
+
+# good
+p **
+p **/**
+p **/**/**
+
+rm -rf a
+mkdir -p $EMPTY/{a,b}/{a,b}/{a,b}/{a,b}
+cd $EMPTY
+
+# good
+s '**/a'
+p **/a
+
+# good
+s 'a/**'
+p a/**
+
+# good
+s '**'
+p **
+
+# good
+s '**/**'
+p **/**
+
+# good
+s '**/**/**'
+p **/**/**
+
+# good
+s '**/**/**/**/**'
+p **/**/**/**/**
+
+# good
+s '**/**/a'
+p **/**/a
+
+# good 
+s 'a/**/**'
+p a/**/**
+
+# good
+s 'a/**/**/**'
+p a/**/**/**
+
+# good
+s 'a/**/**/**/**'
+p a/**/**/**/**
+
+# same as ksh93
+s '**/a/**'
+p **/a/**
+
+# same as ksh93
+s '**/a/**/**'
+p **/a/**/**
+
+# same as ksh93
+s '**/a/**/**/**'
+p **/a/**/**/**
+
+# good
+s '**/**/a/**'
+p **/**/a/**
+
+cd "$olddir"
+rm -rf $EMPTY
diff --git a/tests/globstar3.sub b/tests/globstar3.sub
new file mode 100644
index 0000000..771d906
--- /dev/null
+++ b/tests/globstar3.sub
@@ -0,0 +1,37 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+olddir=$PWD
+: ${TMPDIR:=/var/tmp}
+
+SCRATCH=${TMPDIR}/scratch-$$
+rm -rf $SCRATCH
+mkdir $SCRATCH || exit 1
+
+cd $SCRATCH
+
+mkdir a b
+touch a/aa a/ab
+touch b/bb b/bc
+
+ln -s a c
+
+shopt -s globstar
+
+echo **
+echo **/
+
+echo **/*b
+
+cd "$olddir"
+rm -rf $SCRATCH
diff --git a/tests/heredoc.right b/tests/heredoc.right
new file mode 100644
index 0000000..f6e53be
--- /dev/null
+++ b/tests/heredoc.right
@@ -0,0 +1,106 @@
+a
+b
+c
+a
+$PS4
+
+
+
+there
+one - alpha
+two - beta
+three - gamma
+hi\
+there$a
+stuff
+hi\
+there
+EO\
+F
+hi
+hi
+tab 1
+tab 2
+tab 3
+abc
+def ghi
+jkl mno
+fff is a function
+fff () 
+{ 
+    ed ${TMPDIR}/foo <<ENDOFINPUT > /dev/null
+/^name/d
+w
+q
+ENDOFINPUT
+
+    aa=1
+}
+fff is a function
+fff () 
+{ 
+    ed ${TMPDIR}/foo <<ENDOFINPUT > /dev/null
+/^name/d
+w
+q
+ENDOFINPUT
+
+    aa=1
+}
+foo is a function
+foo () 
+{ 
+    echo;
+    cat <<END
+bar
+END
+
+    cat <<EOF
+qux
+EOF
+
+}
+
+bar
+qux
+
+bar
+qux
+abc def geh
+./heredoc3.sub: line 23: warning: here-document at line 21 delimited by end-of-file (wanted `EOF')
+= here is the text =
+./heredoc3.sub: line 29: warning: here-document at line 27 delimited by end-of-file (wanted `EOF')
+this paren ) is not a problem
+./heredoc3.sub: line 35: warning: here-document at line 33 delimited by end-of-file (wanted `EOF')
+these balanced parens ( ) are not a problem
+./heredoc3.sub: line 41: warning: here-document at line 39 delimited by end-of-file (wanted `EOF')
+quoted balanced parens \( ) are not a problem either
+more text in a subshell
+some more text in a different subshell
+end
+hello
+hello
+ENDEND
+end ENDEND
+hello
+end hello
+end x*x
+helloEND
+end helloEND
+hello
+\END
+end hello<NL>\END
+./heredoc3.sub: line 98: warning: here-document at line 96 delimited by end-of-file (wanted `EOF')
+./heredoc3.sub: line 99: syntax error: unexpected end of file
+heredoc1
+EOF
+Ok:0
+argv[1] = <onetwo>
+argv[2] = <threefour>
+argv[1] = <two>
+argv[2] = <threefi>
+argv[3] = <ve>
+comsub here-string
+./heredoc.tests: line 149: warning: here-document at line 147 delimited by end-of-file (wanted `EOF')
+hi
+there
diff --git a/tests/heredoc.tests b/tests/heredoc.tests
new file mode 100644
index 0000000..430302f
--- /dev/null
+++ b/tests/heredoc.tests
@@ -0,0 +1,149 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# basics
+cat <<EOF
+a
+b
+c
+EOF
+read x <<EOF
+a
+b
+c
+EOF
+echo "$x"
+read x y <<\EOF
+$PS4
+EOF
+echo "$x"
+
+# empty here-documents
+read x <<EOF
+EOF
+echo "$x"
+read x <<\EOF
+EOF
+echo "$x"
+read x <<EOF
+$empty
+EOF
+echo "$x"
+
+# check order and content of multiple here docs
+cat << EOF1 << EOF2 
+hi
+EOF1
+there
+EOF2
+
+while read line1; do
+	read line2 <&3
+	echo $line1 - $line2
+done <<EOF1 3<<EOF2
+one
+two
+three
+EOF1
+alpha
+beta
+gamma
+EOF2
+
+
+# check quoted here-doc is protected
+
+a=foo
+cat << 'EOF'
+hi\
+there$a
+stuff
+EOF
+
+# check that quoted here-documents don't have \newline processing done
+
+cat << 'EOF'
+hi\
+there
+EO\
+F
+EOF
+true
+
+# check that \newline is removed at start of here-doc
+cat << EO\
+F
+hi
+EOF
+
+# check that \newline removal works for here-doc delimiter
+cat << EOF
+hi
+EO\
+F
+
+# check operation of tab removal in here documents
+cat <<- EOF
+	tab 1
+	tab 2
+	tab 3
+	EOF
+
+# check appending of text to file from here document
+rm -f ${TMPDIR}/bash-zzz
+cat > ${TMPDIR}/bash-zzz << EOF
+abc
+EOF
+cat >> ${TMPDIR}/bash-zzz << EOF
+def ghi
+jkl mno
+EOF
+cat ${TMPDIR}/bash-zzz
+rm -f ${TMPDIR}/bash-zzz
+
+# make sure command printing puts the here-document as the last redirection
+# on the line, and the function export code preserves syntactic correctness
+fff()
+{
+  ed ${TMPDIR}/foo <<ENDOFINPUT >/dev/null
+/^name/d
+w
+q
+ENDOFINPUT
+aa=1
+}
+
+type fff
+export -f fff
+${THIS_SH} -c 'type fff'
+
+${THIS_SH} ./heredoc1.sub
+
+# test heredocs in command substitutions
+${THIS_SH} ./heredoc2.sub
+${THIS_SH} ./heredoc3.sub
+${THIS_SH} ./heredoc4.sub
+
+# heredoc tests that use different size documents to test pipe implementation
+${THIS_SH} ./heredoc5.sub
+
+echo $(
+	cat <<< "comsub here-string"
+)
+
+# check that end of file delimits a here-document
+# THIS MUST BE LAST!
+
+cat << EOF
+hi
+there
diff --git a/tests/heredoc1.sub b/tests/heredoc1.sub
new file mode 100644
index 0000000..34977c5
--- /dev/null
+++ b/tests/heredoc1.sub
@@ -0,0 +1,29 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+foo()
+{
+	echo
+	cat <<END
+bar
+END
+	cat <<EOF
+qux
+EOF
+}
+
+type foo
+foo
+
+eval "$(type foo | sed 1d)"
+foo
diff --git a/tests/heredoc2.sub b/tests/heredoc2.sub
new file mode 100644
index 0000000..7e97ed8
--- /dev/null
+++ b/tests/heredoc2.sub
@@ -0,0 +1,9 @@
+TEST=$(cat <<EOF | sort -u
+abc
+geh
+def
+abc
+EOF
+)
+
+echo $TEST
diff --git a/tests/heredoc3.sub b/tests/heredoc3.sub
new file mode 100644
index 0000000..efbdf7d
--- /dev/null
+++ b/tests/heredoc3.sub
@@ -0,0 +1,98 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+SAVEPWD=$PWD
+: ${TMPDIR:=/tmp}
+cd $TMPDIR || echo "heredoc3.sub: cannot cd to $TMPDIR" >&2
+
+text=$(cat <<EOF
+here is the text
+EOF)
+
+echo = $text =
+
+unbalanced=$(cat <<EOF
+this paren ) is not a problem
+EOF)
+
+echo $unbalanced
+
+balanced=$(cat <<EOF
+these balanced parens ( ) are not a problem
+EOF)
+
+echo $balanced
+
+balanced=$(cat <<EOF
+quoted balanced parens \( ) are not a problem either
+EOF)
+
+echo $balanced
+
+(cat <<EOF
+more text in a subshell
+EOF
+)
+
+(cat <<EOF; )
+some more text in a different subshell
+EOF
+echo end
+
+# semi-weird examples posted by Wayne Pollack to austin-group mailing list
+cat <<-'	END'
+	hello
+	END
+
+cat <<END
+hello
+END\
+END
+END
+echo end ENDEND
+
+cat <<'    END    '
+hello
+    END    
+echo end hello
+
+cat <<x*x >/dev/null & touch 'x*x'
+x star x
+x*x
+wait $!
+echo end 'x*x'
+rm 'x*x'
+
+cat <<END
+hello\
+END
+END
+echo end helloEND
+
+cat <<END
+hello
+\END
+END
+echo -E end 'hello<NL>\END'
+
+# gprof
+if [ -n "$GMON_OUT_PREFIX" ]; then
+	mv ${GMON_OUT_PREFIX}.[0-9]* "$SAVEPWD" >/dev/null 2>&1
+fi
+cd "$SAVEPWD"
+
+# this has to be last -- results in a syntax error
+# doesn't currently parse because EOF is not on a line by itself -- should it?
+(cat <<EOF
+still more text in a subshell
+EOF)
diff --git a/tests/heredoc4.sub b/tests/heredoc4.sub
new file mode 100644
index 0000000..381b64a
--- /dev/null
+++ b/tests/heredoc4.sub
@@ -0,0 +1,12 @@
+cat <<EO`true`F
+heredoc1
+EO`false`F
+EO`true`F
+echo Ok:$? 
+
+one=one
+four=four
+five='fi ve'
+
+recho $one`echo two three`$four
+recho `echo two three`$five
diff --git a/tests/heredoc5.sub b/tests/heredoc5.sub
new file mode 100644
index 0000000..d7b5926
--- /dev/null
+++ b/tests/heredoc5.sub
@@ -0,0 +1,41 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# test here documents for sizes > 65536 (max pipe capacity I've seen),
+# 4096 < size < 65536 (for smaller pipe capacities)
+# 512 < size < 4096 (PIPE_BUF)
+#
+# There are tests in other scripts for here documents shorter than 512 bytes
+#
+# This should return the same results regardless of the pipe capacity
+
+: ${TMPDIR:=/tmp}
+FILENAME=${TMPDIR}/catfile-$$
+
+catfile()
+{
+	cat <<- EOF > $FILENAME
+		$(cat $1)
+EOF
+	cmp $FILENAME $1
+	rm -f $FILENAME
+}
+
+
+if [ -f $BUILD_DIR/y.tab.c ]; then
+	catfile $BUILD_DIR/y.tab.c
+else
+	catfile ../y.tab.c
+fi
+catfile ${BUILD_DIR}/config.h
+catfile ${BUILD_DIR}/version.h
diff --git a/tests/herestr.right b/tests/herestr.right
new file mode 100644
index 0000000..4ac2cc6
--- /dev/null
+++ b/tests/herestr.right
@@ -0,0 +1,38 @@
+alpha
+beta
+4
+4
+
+
+
+abcde
+yo
+hot damn
+what a fabulous window treatment
+double"quote
+onetwothree
+first second third
+f1 () 
+{ 
+    cat <<< "abcde";
+    cat <<< "yo";
+    cat <<< "$a $b";
+    cat <<< 'what a fabulous window treatment';
+    cat <<< 'double"quote'
+}
+f2 () 
+{ 
+    cat <<< onetwothree
+}
+f3 () 
+{ 
+    cat <<< "$@"
+}
+echo $(echo hi)
+echo ho
+echo off to work we go
+declare -a uu=([0]="" [1]="kghfjk" [2]="jkfzuk" [3]=$'i\n')
+foo        bar
+foo        bar
+qux:::::bax
+qux:::::bax
diff --git a/tests/herestr.tests b/tests/herestr.tests
new file mode 100644
index 0000000..6f4c74c
--- /dev/null
+++ b/tests/herestr.tests
@@ -0,0 +1,74 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# basics
+read x <<<"alpha"
+echo "$x"
+read x <<<beta
+echo "$x"
+X=4
+read x <<<$X
+echo "$x"
+read x <<<"$X"
+echo "$x"
+unset X
+
+# empty here-strings
+read x <<<""
+echo "$x"
+read x <<<"$empty"
+echo "$x"
+read x <<<$empty
+echo "$x"
+
+a=hot
+b=damn
+f1()
+{
+cat <<< "abcde"
+
+cat <<< "yo"
+
+cat <<< "$a $b"
+
+cat <<< 'what a fabulous window treatment'
+
+cat <<< 'double"quote'
+}
+
+f2()
+{
+cat <<< onetwothree
+}
+
+f3()
+{
+cat <<< "$@"
+}
+
+f1
+f2
+f3 first second third
+
+typeset -f
+
+cat <<< 'echo $(echo hi)'
+
+cat <<< "echo ho"
+
+cat <<< "echo $(echo off to work we go)"
+
+IFS="/" read -r -d $'\000' -a uu <<< /kghfjk/jkfzuk/i
+declare -p uu
+
+${THIS_SH} ./herestr1.sub
diff --git a/tests/herestr1.sub b/tests/herestr1.sub
new file mode 100644
index 0000000..0cf8082
--- /dev/null
+++ b/tests/herestr1.sub
@@ -0,0 +1,10 @@
+# problems with word splitting unquoted here-strings present since bash-3.2
+
+x="foo        bar"
+cat <<< $x     # Word-splitting appears to collapse the run of whitespace
+cat <<< "$x"  # Whitespace preserved, as with here doc
+
+x="qux:::::bax"
+IFS=':'
+cat <<< $x     # Word-splitting appears to collapse the run of whitespace
+cat <<< "$x"  # Whitespace preserved, as with here doc
diff --git a/tests/histexp.right b/tests/histexp.right
new file mode 100644
index 0000000..341252c
--- /dev/null
+++ b/tests/histexp.right
@@ -0,0 +1,246 @@
+echo $BASH_VERSION
+./histexp.tests: line 37: history: !!:z: history expansion failed
+    1  for i in one two three; do echo $i; done
+    2  /bin/sh -c 'echo this is $0'
+    3  ls
+    4  echo $BASH_VERSION
+    1  for i in one two three; do echo $i; done
+    2  /bin/sh -c 'echo this is $0'
+    3  ls
+    4  echo $BASH_VERSION
+    5  HISTFILE=$TMPDIR/newhistory
+    6  echo line 2 for history
+echo line 2 for history
+echo line 2 for history
+set -H
+echo line 2 for history
+line 2 for history
+    1  for i in one two three; do echo $i; done
+    2  /bin/sh -c 'echo this is $0'
+    3  ls
+    4  echo $BASH_VERSION
+    5  HISTFILE=$TMPDIR/newhistory
+    6  echo line 2 for history
+    7  set -H
+    8  echo line 2 for history
+a b c d e
+echo a b c d e
+a b c d e
+echo line 2 for history
+line 2 for history
+echo line 8 for history
+line 8 for history
+/bin/sh -c 'echo this is $0'
+this is /bin/sh
+echo sh
+sh
+echo /bin
+/bin
+echo e
+e
+a b c d e
+echo b c d e
+b c d e
+echo b c d
+b c d
+echo d e
+d e
+echo d e
+d e
+echo b c d
+b c d
+file.c
+echo file
+file
+echo .c
+.c
+echo 'file'
+file
+bax.c
+echo $file
+bax
+echo .c
+.c
+echo '$file'
+$file
+a b c d e
+echo 'a' 'b' 'c' 'd' 'e'
+a b c d e
+echo 'a b c d e'
+a b c d e
+foo.c foo.o foo.html foo.h
+echo bar.c foo.o foo.html foo.h
+bar.c foo.o foo.html foo.h
+echo bar.c bar.o bar.html bar.h
+bar.c bar.o bar.html bar.h
+echo xbar.c xbar.o xbar.html xbar.h
+xbar.c xbar.o xbar.html xbar.h
+echo xbar.c xbar.o xbar.html xbar.h
+xbar.c xbar.o xbar.html xbar.h
+echo xwhix.c xwhix.o xwhix.html xwhix.h
+xwhix.c xwhix.o xwhix.html xwhix.h
+echo xwhix.c xwhix.o xwhix.html xwhix.h
+echo 'xwhix'
+xwhix
+echo 'xwhix.h'
+xwhix.h
+echo 'xwhix.h'
+xwhix.h
+echo 'xwhix.h'
+xwhix.h
+    7  set -H
+    8  echo line 2 for history
+    9  echo a b c d e
+   10  echo line 2 for history
+   11  echo line 8 for history
+   12  /bin/sh -c 'echo this is $0'
+   13  echo sh
+   14  echo /bin
+   15  echo e
+   16  echo a b c d e
+   17  echo b c d e
+   18  echo b c d
+   19  echo d e
+   20  echo b c d
+   21  echo file.c
+   22  echo file
+   23  echo .c
+   24  echo 'file'
+   25  echo $file.c
+   26  echo $file
+   27  echo .c
+   28  echo '$file'
+   29  echo a b c d e
+   30  echo 'a' 'b' 'c' 'd' 'e'
+   31  echo 'a b c d e'
+   32  echo foo.c foo.o foo.html foo.h
+   33  echo bar.c foo.o foo.html foo.h
+   34  echo bar.c bar.o bar.html bar.h
+   35  echo xbar.c xbar.o xbar.html xbar.h
+   36  echo xwhix.c xwhix.o xwhix.html xwhix.h
+   37  echo 'xwhix'
+   38  echo 'xwhix.h'
+!!
+!!
+echo '!!' \!\!
+!! !!
+ok 1
+ok 2
+ok 3
+echo shopt a
+shopt a
+echo a b c d 2> /dev/null
+a b c d
+one two three four
+echo two ; echo four  
+one two three four
+echo four ; echo two
+!
+!
+!
+!
+!
+!
+!
+!
+!
+\!
+\!
+\!
+\!
+a
+b
+c
+echo "#!/bin/bash" set -o posix
+#!/bin/bash set -o posix
+!!
+!!
+a
+echo $(echo echo a)
+echo a
+a
+echo echo a $(echo echo a)
+echo a echo a
+b
+!! $(echo !!)
+c
+echo "echo c" "$(echo echo c)"
+echo c echo c
+d
+echo "echo d" $(echo "echo d")
+echo d echo d
+e
+!! !!
+f
+!!
+f
+!!
+g
+echo "echo g"
+echo g
+g
+eval echo "echo g"
+echo g
+h
+echo \!\! `echo echo h`
+!! echo h
+i
+echo echo i `echo echo i`
+echo i echo i
+j
+echo `echo j` echo j
+j echo j
+a
+cat < <(echo echo a)
+echo a
+b
+echo echo b `echo echo b`
+echo b echo b
+c
+!
+d
+!
+e
+! !
+./histexp4.sub: line 33: !': event not found
+/tmp/Step1
+echo /$(echo tmp)/Step1
+/tmp/Step1
+echo /<(echo tmp)/Step1 > /dev/null
+/tmp/Step1
+echo $(echo /tmp)/Step1
+/tmp/Step1
+echo <(echo /tmp)/Step1 > /dev/null
+/+(one|two|three)/Step1
+echo /+(one|two|three)/Step1
+/+(one|two|three)/Step1
+/*(tmp|dev|usr)/Step1
+echo /*(tmp|dev|usr)/Step1
+/*(tmp|dev|usr)/Step1
++(/one|/two|/three)/Step1
+echo +(/one|/two|/three)/Step1
++(/one|/two|/three)/Step1
+*(/tmp|/dev|/usr)/Step1
+echo *(/tmp|/dev|/usr)/Step1
+*(/tmp|/dev|/usr)/Step1
+one
+	echo echo one
+echo one
+echo one
+echo one
+    1  set -o histexpand
+    2  echo one
+    3  for f in a b c; do 	echo echo one; done
+    4  history
+two
+	echo echo two
+echo two
+echo two
+echo two
+    1  echo two
+    2  for f in a b c; do 	echo echo two; done
+    3  history
+a
+echo !!
+--between--
+echo !!
diff --git a/tests/histexp.tests b/tests/histexp.tests
new file mode 100644
index 0000000..91a36f2
--- /dev/null
+++ b/tests/histexp.tests
@@ -0,0 +1,158 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+LC_ALL=C
+LANG=C
+trap 'rm $TMPDIR/newhistory' 0
+
+file=bax
+histchars='!^#'	# make sure history comment char is set correctly
+
+unset HISTFILESIZE HISTTIMEFORMAT
+
+history -c
+
+HISTFILE=history.list
+HISTCONTROL=ignoreboth
+HISTIGNORE='&:#*:history*:fc*'
+# we will end up exercising the history stifling code as a result
+HISTSIZE=32
+
+shopt -s cmdhist
+set -o history
+
+history -p '!!'
+
+# this should result in a failed history expansion error
+history -p '!!:z'
+
+history
+
+HISTFILE=$TMPDIR/newhistory
+history -a
+
+history -w
+
+history -s "echo line 2 for history"
+history
+history -p '!e'
+history -p '!!'
+
+set -H
+!!
+!e
+
+history
+
+echo a b c d e
+!?ch?
+!-2
+^2^8
+
+!2
+
+# we're selecting /bin/sh -c ...; we want `sh'
+echo !-1:0:t
+# we're selecting /bin/sh -c ...; we want `/bin'
+echo !-2:0:h
+# we're selecting `echo a b c d e'; we want `e'
+echo !?d?:5
+
+echo a b c d e
+echo !-1:2-$
+echo !-2:2-4
+echo !-2:3*
+echo !!:*
+
+echo !?a?:2-
+
+echo file.c
+echo !!:$:r
+echo !-2:$:e
+echo !-3:$:r:q
+
+echo $file.c
+echo !!:$:r
+echo !-2:^:e
+echo !-3:$:r:q
+
+echo a b c d e
+echo !!:1-$:x
+echo !-2:1-$:q
+
+echo foo.c foo.o foo.html foo.h
+!!:s/foo/bar/
+!-2:gs/foo/bar/
+!!:gs/bar/x&/
+!-2:g&
+
+# make sure we can use any delimiter in the substitution, not just `/'
+!!:gs+bar+whix+
+
+!!:p
+
+# wow
+echo !?.o?:%:r:q
+
+!!:0 !?.h?:%:q
+!!:-$
+!:-$
+
+history
+
+# make sure single quotes inhibit history expansion
+echo '!!'
+
+# make sure backslashes can quote the history expansion character
+echo \!\!
+
+# but other expansions on the line should still be processed
+
+echo '!!' !!:*
+history -c
+unset HISTFILE
+
+# make sure that the special bash cases are not history expanded
+case p in
+[!A-Z])	echo ok 1;;
+esac
+
+var1='ok 2'
+var2=var1
+
+echo ${!var2}
+
+# Bash-2.01[.1] fails this test -- it attempts history expansion after the
+# history_comment_char
+echo ok 3 # !1200
+
+# bash versions through bash-4.3 fail this; they make the digit preceding the
+# > into a separate word, changing the meaning of the redirection
+shopt a b c d 2>/dev/null
+echo !shopt-1
+
+echo !shopt*
+
+# make sure a :p modifier anywhere on the line affects all history expansions
+echo one two three four
+echo !:2:p ; echo !$  
+echo one two three four
+echo !$ ; echo !:2:p
+
+${THIS_SH} ./histexp1.sub
+${THIS_SH} ./histexp2.sub
+${THIS_SH} ./histexp3.sub
+${THIS_SH} ./histexp4.sub
+${THIS_SH} ./histexp5.sub
+${THIS_SH} ./histexp6.sub
+${THIS_SH} ./histexp7.sub
diff --git a/tests/histexp1.sub b/tests/histexp1.sub
new file mode 100644
index 0000000..cc2c5d1
--- /dev/null
+++ b/tests/histexp1.sub
@@ -0,0 +1,36 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+LC_ALL=C
+LANG=C
+
+set -o history
+set -H
+
+echo '!'
+echo "!"
+echo !
+
+echo "$( echo '!' )"
+echo "$( echo "!" )"
+echo "$( echo ! )"
+
+echo $( echo '!' )
+echo $( echo "!" )
+echo $( echo ! )
+
+echo "$( echo "\!" )"
+echo "\!"
+
+echo "$( echo '\!' )"
+echo '\!'
diff --git a/tests/histexp2.sub b/tests/histexp2.sub
new file mode 100644
index 0000000..bb5bfda
--- /dev/null
+++ b/tests/histexp2.sub
@@ -0,0 +1,14 @@
+LANG=C LC_ALL=C
+
+set -o history
+echo a
+echo b
+echo c
+
+set -o histexpand
+set -o posix
+
+echo "#!/bin/bash" !!
+
+echo '!!'
+echo "!!"
diff --git a/tests/histexp3.sub b/tests/histexp3.sub
new file mode 100644
index 0000000..4962436
--- /dev/null
+++ b/tests/histexp3.sub
@@ -0,0 +1,57 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+HISTFILE=${TMPDIR}/bashhist-$$
+
+set -o history
+set -o histexpand
+
+echo a
+echo $(echo !!)
+
+echo a
+echo !! $(echo !!)
+
+echo b
+echo '!!' '$(echo !!)'
+
+echo c
+echo "!!" "$(echo !!)"
+
+echo d
+echo "!!" $(echo "!!")
+
+echo e
+echo '!!' $(echo '!!')
+
+echo f
+echo '!!'
+echo f
+eval echo '!!'
+
+echo g
+echo "!!"
+echo g
+eval echo "!!"
+
+echo h
+echo \!\! `echo !!`
+
+echo i
+echo !! `echo !!`
+
+echo j
+echo `echo j` !!
+
+set +o history
+rm -f $HISTFILE		# just in case
diff --git a/tests/histexp4.sub b/tests/histexp4.sub
new file mode 100644
index 0000000..9cae0e3
--- /dev/null
+++ b/tests/histexp4.sub
@@ -0,0 +1,36 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+HISTFILE=$TMPDIR/bashhist-$$
+
+set -o history
+set -o histexpand
+
+echo a
+cat < <(echo !!)
+
+echo b
+echo !! `echo !!`
+
+echo c
+echo "$(echo "!" )"
+
+echo d
+echo "$(echo '!' )"
+
+echo e
+echo '!' "!"
+echo "'!'"
+
+set +o history
+rm -f $HISTFILE
diff --git a/tests/histexp5.sub b/tests/histexp5.sub
new file mode 100644
index 0000000..9e6d01b
--- /dev/null
+++ b/tests/histexp5.sub
@@ -0,0 +1,41 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+set -o history
+set -o histexpand
+
+# command and process substitutions should be tokenized as a single word
+echo /$(echo tmp)/Step1
+echo !:*
+echo /<(echo tmp)/Step1 >/dev/null
+echo !:*
+
+# same tests at the beginning of a word
+echo $(echo /tmp)/Step1
+echo !:*
+echo <(echo /tmp)/Step1 >/dev/null
+echo !:*
+
+# so should shell extended glob patterns
+shopt -s extglob
+
+echo /+(one|two|three)/Step1
+echo !:*
+echo /*(tmp|dev|usr)/Step1
+echo !:*
+
+# same tests at the beginning of a word
+echo +(/one|/two|/three)/Step1
+echo !:*
+echo *(/tmp|/dev|/usr)/Step1
+echo !:*
diff --git a/tests/histexp6.sub b/tests/histexp6.sub
new file mode 100644
index 0000000..d52e5ea
--- /dev/null
+++ b/tests/histexp6.sub
@@ -0,0 +1,37 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+unset HISTIGNORE
+HISTFILE=$TMPDIR/bashhist-$$
+
+set -o history
+set -o histexpand
+
+echo one
+
+for f in a b c; do
+	echo !!
+done
+
+history
+history -c
+
+echo two
+for f in a b c; do
+	echo !-1
+done
+
+history
+
+set +o history
+rm -f $HISTFILE
diff --git a/tests/histexp7.sub b/tests/histexp7.sub
new file mode 100644
index 0000000..8822205
--- /dev/null
+++ b/tests/histexp7.sub
@@ -0,0 +1,18 @@
+# make sure history expansion doesn't take place while parsing command
+# substitutions
+
+set -o history
+set -o histexpand
+echo a
+
+echo $( cat <<EOF
+echo !!
+EOF
+)
+
+echo --between--
+
+cat <( cat <<'EOF'
+echo !!
+EOF
+)
diff --git a/tests/history.list b/tests/history.list
new file mode 100644
index 0000000..2a4c222
--- /dev/null
+++ b/tests/history.list
@@ -0,0 +1,4 @@
+for i in one two three; do echo $i; done
+/bin/sh -c 'echo this is $0'
+ls
+echo $BASH_VERSION
diff --git a/tests/history.right b/tests/history.right
new file mode 100644
index 0000000..379de48
--- /dev/null
+++ b/tests/history.right
@@ -0,0 +1,266 @@
+./history.tests: line 17: history: -x: invalid option
+history: usage: history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg [arg...]
+./history.tests: line 19: history: cannot use more than one of -anrw
+./history.tests: line 22: fc: -v: invalid option
+fc: usage: fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]
+    1  for i in one two three; do echo $i; done
+    2  /bin/sh -c 'echo this is $0'
+    3  ls
+    4  echo $BASH_VERSION
+1	 for i in one two three; do echo $i; done
+2	 /bin/sh -c 'echo this is $0'
+3	 ls
+4	 echo $BASH_VERSION
+	 for i in one two three; do echo $i; done
+	 /bin/sh -c 'echo this is $0'
+	 ls
+	 echo $BASH_VERSION
+4	 echo $BASH_VERSION
+3	 ls
+2	 /bin/sh -c 'echo this is $0'
+1	 for i in one two three; do echo $i; done
+	 echo $BASH_VERSION
+	 ls
+	 /bin/sh -c 'echo this is $0'
+	 for i in one two three; do echo $i; done
+    1  for i in one two three; do echo $i; done
+    2  /bin/sh -c 'echo this is $0'
+    3  ls
+    4  echo $BASH_VERSION
+    5  echo line for history
+echo line for history
+	 for i in one two three; do echo $i; done
+	 /bin/sh -c 'echo this is $0'
+	 ls
+	 echo $BASH_VERSION
+	 echo line for history
+displaying $HISTFILE after history -a
+echo line for history
+HISTFILE=$TMPDIR/newhistory
+    1  for i in one two three; do echo $i; done
+    2  /bin/sh -c 'echo this is $0'
+    3  ls
+    4  echo $BASH_VERSION
+    5  echo line for history
+    6  HISTFILE=$TMPDIR/newhistory
+    7  echo displaying \$HISTFILE after history -a
+    8  cat $HISTFILE
+for i in one two three; do echo $i; done
+/bin/sh -c 'echo this is $0'
+ls
+echo $BASH_VERSION
+echo line for history
+HISTFILE=$TMPDIR/newhistory
+echo displaying \$HISTFILE after history -a
+cat $HISTFILE
+    1  for i in one two three; do echo $i; done
+    2  /bin/sh -c 'echo this is $0'
+    3  ls
+    4  echo $BASH_VERSION
+    5  echo line for history
+    6  HISTFILE=$TMPDIR/newhistory
+    7  echo displaying \$HISTFILE after history -a
+    8  cat $HISTFILE
+    9  echo line 2 for history
+echo line 2 for history
+echo line 2 for history
+    1  for i in one two three; do echo $i; done
+    2  /bin/sh -c 'echo this is $0'
+    3  ls
+    4  echo $BASH_VERSION
+    5  echo line for history
+    6  HISTFILE=$TMPDIR/newhistory
+    7  echo displaying \$HISTFILE after history -a
+    8  cat $HISTFILE
+    9  echo line 2 for history
+   10  # this should show up as one history entry
+   11  for x in one two three; do 	:; done
+set -H
+echo line 2 for history
+line 2 for history
+4	 echo $BASH_VERSION
+5	 echo line for history
+6	 HISTFILE=$TMPDIR/newhistory
+7	 echo displaying \$HISTFILE after history -a
+8	 cat $HISTFILE
+9	 echo line 2 for history
+10	 # this should show up as one history entry
+11	 for x in one two three; do 	:; done
+12	 # just a basic test.  a full test suite for history expansion should be
+13	 # created
+14	 set -H
+15	 echo line 2 for history
+16	 unset HISTSIZE
+17	 unset HISTFILE
+4	 echo $BASH_VERSION
+5	 echo line for history
+6	 HISTFILE=$TMPDIR/newhistory
+7	 echo displaying \$HISTFILE after history -a
+8	 cat $HISTFILE
+./history.tests: line 90: fc: no command found
+   15  echo line 2 for history
+   16  unset HISTSIZE
+   17  unset HISTFILE
+   18  # now an out-of-range error because of the one=two not found in history
+aa ab ac
+echo xx xb xc
+xx xb xc
+echo 44 48 4c
+44 48 4c
+./history.tests: line 105: fc: no command found
+aa
+bb
+cc
+echo cc
+echo cc
+cc
+aa
+bb
+cc
+echo cc
+echo cc
+cc
+1
+one
+two
+three
+    1  cat <<!
+one
+two
+three
+!
+
+    2  history
+cat <<!
+one
+two
+three
+!
+
+one
+two
+three
+5.1
+echo ${BASH_VERSION%\.*}
+5.1
+	 echo ${BASH_VERSION%\.*}
+a
+b
+c
+d
+e
+    1  echo a
+    2  echo b
+    3  echo c
+    4  echo d
+    5  echo e
+
+    1  echo a
+    2  echo e
+f
+g
+h
+i
+    1  echo a
+    2  echo e
+    3  echo f
+    4  echo g
+    5  echo h
+
+./history3.sub: line 40: history: 16: history position out of range
+./history3.sub: line 41: history: 200: history position out of range
+./history3.sub: line 42: history: -20: history position out of range
+./history3.sub: line 43: history: -50: history position out of range
+./history3.sub: line 44: history: 5-0xaf: history position out of range
+    1  echo a
+    2  echo e
+    3  echo f
+    4  echo g
+    5  echo h
+
+
+0
+1
+2
+(left
+mid
+right)
+A
+B
+
+(left
+mid
+right)
+A
+B
+
+(left
+mid
+right)
+A
+B
+
+0
+1
+2
+(left
+mid
+right)
+A
+B
+(left
+mid
+right)
+A
+B
+
+0
+1
+2
+(left
+mid
+right)
+A
+B
+(left
+mid
+right)
+A
+B
+a
+b
+./history5.sub: line 24: fc: history specification out of range
+./history5.sub: line 25: fc: no command found
+1	 echo a
+2	 echo b
+3	 fc -0	# error
+4	 fc -s -0	# error
+c
+6	 echo c
+8	 fc -l -0
+d
+echo d
+d
+a
+b
+c
+d
+e
+f
+4	 echo d
+5	 echo e
+6	 echo f
+out of range 1
+6	 echo f
+7	 fc -l
+8	 echo out of range 1
+out of range 2
+8	 echo out of range 1
+9	 fc -l 502 498
+10	 echo out of range 2
+out of range 3
+10	 echo out of range 2
+11	 fc -l 498 502
+12	 echo out of range 3
+out of range 4
+13	 fc -l 1 99
diff --git a/tests/history.tests b/tests/history.tests
new file mode 100644
index 0000000..53321f0
--- /dev/null
+++ b/tests/history.tests
@@ -0,0 +1,132 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+trap 'rm $TMPDIR/newhistory' 0
+
+# bad options
+history -x
+# cannot use -r and -w at the same time
+history -r -w /dev/null
+
+# bad option
+fc -v
+
+unset HISTFILESIZE
+
+# all of these should result in an empty history list
+history -c
+history -r /dev/null
+history -n /dev/null
+history -c
+
+HISTFILE=history.list
+HISTCONTROL=ignoreboth
+HISTIGNORE='&:history*:fc*'
+HISTSIZE=32
+export HISTIGNORE
+
+shopt -s cmdhist
+set -o history
+
+history
+
+fc -l
+fc -nl
+
+fc -lr
+fc -nlr
+
+history -s "echo line for history"
+history
+
+history -p '!!'
+
+fc -nl
+
+HISTFILE=$TMPDIR/newhistory
+history -a
+echo displaying \$HISTFILE after history -a
+cat $HISTFILE
+
+history
+history -w
+cat $HISTFILE
+
+history -s "echo line 2 for history"
+history
+history -p '!e'
+history -p '!!'
+
+# this should show up as one history entry
+for x in one two three
+do
+	:
+done
+history
+
+# just a basic test.  a full test suite for history expansion should be
+# created
+set -H
+!!
+!e
+
+unset HISTSIZE
+unset HISTFILE
+
+fc -l 4
+fc -l 4 8
+
+# now an out-of-range error because of the one=two not found in history
+fc -l one=two three=four 502
+
+history 4
+
+shopt -so history
+shopt -s expand_aliases
+
+alias r="fc -s"
+
+echo aa ab ac
+
+r a=x
+r x=4 b=8
+
+# this had better fail with `no command found'
+r cc
+
+unalias -a
+alias
+
+# these two blocks had better both result in the same output
+echo aa
+echo bb
+echo cc
+fc -e cat
+
+echo aa
+echo bb
+echo cc
+fc -e cat -1
+
+set +o history
+
+shopt -q -o history
+echo $?
+
+${THIS_SH} ./history1.sub
+rm -f $TMPDIR/foohist-*
+
+${THIS_SH} ./history2.sub
+${THIS_SH} ./history3.sub
+${THIS_SH} ./history4.sub
+${THIS_SH} ./history5.sub
diff --git a/tests/history1.sub b/tests/history1.sub
new file mode 100644
index 0000000..b67a0ef
--- /dev/null
+++ b/tests/history1.sub
@@ -0,0 +1,28 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+trap 'rm -f $HISTFILE' 0 1 2 3 6 15
+
+HISTFILE=$TMPDIR/foohist-$$
+unset HISTIGNORE HISTCONTROL
+set -o history
+
+history -c
+cat <<!
+one
+two
+three
+!
+
+history
+fc -s cat
diff --git a/tests/history2.sub b/tests/history2.sub
new file mode 100644
index 0000000..1a8e78c
--- /dev/null
+++ b/tests/history2.sub
@@ -0,0 +1,10 @@
+set -o history
+HISTSIZE=256
+HISTFILE=/dev/null
+
+# these two lines should be the same
+echo ${BASH_VERSION%\.*}
+echo $(fc -nl -1)
+
+echo ${BASH_VERSION%\.*}
+fc -nl -1
diff --git a/tests/history3.sub b/tests/history3.sub
new file mode 100644
index 0000000..d8a2203
--- /dev/null
+++ b/tests/history3.sub
@@ -0,0 +1,49 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+: ${TMPDIR:=/tmp}
+
+set -o history
+HISTFILE=$TMPDIR/history-$$
+
+history -c
+
+echo a
+echo b
+echo c
+echo d
+echo e
+
+history ; echo 
+
+history -d 2-4
+
+history
+
+echo f
+echo g
+echo h
+echo i
+history -d 6--1
+history ; echo
+
+history -d 16-40
+history -d 1-200
+history -d -20-50
+history -d 1--50
+history -d 5-0xaf
+
+history ; echo
+
+unset HISTFILE
+exit 0
diff --git a/tests/history4.sub b/tests/history4.sub
new file mode 100644
index 0000000..651374c
--- /dev/null
+++ b/tests/history4.sub
@@ -0,0 +1,47 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+HISTFILE=$TMPDIR/newhistory-$$
+export HISTFILE
+
+trap 'rm -f $HISTFILE' EXIT
+
+HISTSIZE=32
+HISTFILESIZE=32
+echo
+set -o history
+history -c
+echo 0
+echo 1
+echo 2
+echo "(left
+mid
+right)"
+echo A
+echo B
+history -w
+set +o history
+
+echo
+printf $'HISTFILE=\n\cRleft\cO\cO\cO\cO\n' | HISTSIZE= ${THIS_SH} --norc -i 2>/dev/null
+echo
+printf $'HISTFILE=\n\cRleft\cO\cO\cO\cO\n' | HISTSIZE=8 ${THIS_SH} --norc -i 2>/dev/null
+
+input="$(cat $HISTFILE)
+"$'\cP\cP\cP\cO\cO
+'
+
+echo
+printf "$input" | HISTSIZE= HISTFILE= ${THIS_SH} --norc -i 2>/dev/null
+echo
+printf "$input" | HISTSIZE=6 HISTFILE= ${THIS_SH} --norc -i 2>/dev/null
diff --git a/tests/history5.sub b/tests/history5.sub
new file mode 100644
index 0000000..245c28d
--- /dev/null
+++ b/tests/history5.sub
@@ -0,0 +1,57 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+trap 'rm -f "$OUT"' 0 1 2 3 6 15
+
+HISTFILE=$TMPDIR/fchist-$$ ; OUT=$HISTFILE
+unset HISTIGNORE HISTCONTROL
+set -o history
+
+echo a
+echo b
+
+fc -0	# error
+fc -s -0	# error
+
+fc -l
+
+echo c
+fc -l 0
+fc -l -0
+
+echo d
+fc -s 0
+
+HISTSIZE=4
+history -c
+
+echo a
+echo b
+echo c
+echo d
+echo e
+echo f
+fc -l
+
+echo out of range 1
+fc -l 502 498
+echo out of range 2
+fc -l 498 502
+echo out of range 3
+fc -l 1 99
+# other out-of-range behavior for future work
+echo out of range 4
+fc -l -20 -40
+
+unset HISTFILE	# suppress writing history file
diff --git a/tests/ifs-posix.right b/tests/ifs-posix.right
new file mode 100644
index 0000000..f3bdccc
--- /dev/null
+++ b/tests/ifs-posix.right
@@ -0,0 +1 @@
+# tests 6856 passed 6856 failed 0
diff --git a/tests/ifs-posix.tests b/tests/ifs-posix.tests
new file mode 100644
index 0000000..21a9063
--- /dev/null
+++ b/tests/ifs-posix.tests
@@ -0,0 +1,270 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# Usage: $SHELL ifs.sh
+#
+# This script generates 6856 tests for the set(1) and read(1)
+# builtins w.r.t. IFS whitespace and non-whitespace characters.
+# Each failed test produces one line on the standard output that
+# contains the test along with the expected and actual results.
+# The last output line contains the test result counts.  ordered>0
+# are the number of tests where IFS=": " produced different results
+# than IFS=" :".  If a test fails the same way for IFS=": " and
+# IFS=" :" then the second output line is suppressed.
+
+TESTS=6856
+
+ksh_read=0
+echo 1 | read ksh_read
+ksh_arith=0
+eval '((ksh_arith+=1))' 2>/dev/null
+
+failed=0
+ordered=0
+passed=0
+
+split()
+{
+	i=$1 s=$2 r=$3 S='' R=''
+	for ifs in ': ' ' :'
+	do	IFS=$ifs
+		set x $i
+		shift
+		IFS=' '
+		g="[$#]"
+		while	:
+		do	case $# in
+			0)	break ;;
+			esac
+			g="$g($1)"
+			shift
+		done
+		case $g in
+		"$s")	case $ksh_arith in
+			1)	((passed+=1)) ;;
+			*)	passed=`expr $passed + 1` ;;
+			esac
+			case $S in
+			'')	S=$g
+				;;
+			"$g")	;;
+			*)	case $ksh_arith in
+				1)	((ordered+=1)) ;;
+				*)	ordered=`expr $ordered + 1` ;;
+				esac
+				;;
+			esac
+			;;
+		"$S")	case $ksh_arith in
+			1)	((failed+=1)) ;;
+			*)	failed=`expr $failed + 1` ;;
+			esac
+			;;
+		*)	case $ksh_arith in
+			1)	((failed+=1)) ;;
+			*)	failed=`expr $failed + 1` ;;
+			esac
+			case $s in
+			"$S")	;;
+			?0*)	echo "IFS=\"$ifs\"; x=\"$i\"; set x \$x; shift; echo \"[\$#]\" # expected \"$s\" got \"$g\"" ;;
+			?1*)	echo "IFS=\"$ifs\"; x=\"$i\"; set x \$x; shift; echo \"[\$#](\$1)\" # expected \"$s\" got \"$g\"" ;;
+			?2*)	echo "IFS=\"$ifs\"; x=\"$i\"; set x \$x; shift; echo \"[\$#](\$1)(\$2)\" # expected \"$s\" got \"$g\"" ;;
+			?3*)	echo "IFS=\"$ifs\"; x=\"$i\"; set x \$x; shift; echo \"[\$#](\$1)(\$2)(\$3)\" # expected \"$s\" got \"$g\"" ;;
+			*)	echo TEST ERROR i="'$i'" s="'$s'" ;;
+			esac
+			case $S in
+			'')	S=$g
+				;;
+			"$g")	;;
+			*)	case $ksh_arith in
+				1)	((ordered+=1)) ;;
+				*)	ordered=`expr $ordered + 1` ;;
+				esac
+				;;
+			esac
+		esac
+		case $ksh_read in
+		1)	echo "$i" | IFS=$ifs read x y; g="($x)($y)" ;;
+		*)	g=`export ifs; echo "$i" | ( IFS=$ifs; read x y; echo "($x)($y)" )` ;;
+		esac
+		case $g in
+		"$r")	case $ksh_arith in
+			1)	((passed+=1)) ;;
+			*)	passed=`expr $passed + 1` ;;
+			esac
+			case $R in
+			'')	R=$g
+				;;
+			"$g")	;;
+			*)	case $ksh_arith in
+				1)	((ordered+=1)) ;;
+				*)	ordered=`expr $ordered + 1` ;;
+				esac
+				;;
+			esac
+			;;
+		"$R")	case $ksh_arith in
+			1)	((failed+=1)) ;;
+			*)	failed=`expr $failed + 1` ;;
+			esac
+			;;
+		*)	case $ksh_arith in
+			1)	((failed+=1)) ;;
+			*)	failed=`expr $failed + 1` ;;
+			esac
+			case $r in
+			"$R")	;;
+			*)	echo "echo \"$i\" | ( IFS=\"$ifs\" read x y; echo \"(\$x)(\$y)\" ) # expected \"$r\" got \"$g\"" ;;
+			esac
+			case $R in
+			'')	R=$g
+				;;
+			"$g")	;;
+			*)	case $ksh_arith in
+				1)	((ordered+=1)) ;;
+				*)	ordered=`expr $ordered + 1` ;;
+				esac
+				;;
+			esac
+			;;
+		esac
+	done
+}
+
+for str in 	\
+	'-'	\
+	'a'	\
+	'- -'	\
+	'- a'	\
+	'a -'	\
+	'a b'	\
+	'- - -'	\
+	'- - a'	\
+	'- a -'	\
+	'- a b'	\
+	'a - -'	\
+	'a - b'	\
+	'a b -'	\
+	'a b c'	\
+
+do
+	IFS=' '
+	set x $str
+
+	shift
+	case $# in
+	0)	continue ;;
+	esac
+
+	f1=$1
+	case $f1 in
+	'-')	f1='' ;;
+	esac
+
+	shift
+	case $# in
+	0)	for d0 in '' ' '
+		do
+			for d1 in '' ' ' ':' ' :' ': ' ' : '
+			do
+				case $f1$d1 in
+				'')	split "$d0$f1$d1" "[0]" "()()" ;;
+				' ')	;;
+				*)	split "$d0$f1$d1" "[1]($f1)" "($f1)()" ;;
+				esac
+			done
+		done
+		continue
+		;;
+	esac
+	f2=$1
+	case $f2 in
+	'-')	f2='' ;;
+	esac
+
+	shift
+	case $# in
+	0)	for d0 in '' ' '
+		do
+			for d1 in ' ' ':' ' :' ': ' ' : '
+			do
+				case ' ' in
+				$f1$d1|$d1$f2)	continue ;;
+				esac
+				for d2 in '' ' ' ':' ' :' ': ' ' : '
+				do
+					case $f2$d2 in
+					'')	split "$d0$f1$d1$f2$d2" "[1]($f1)" "($f1)()" ;;
+					' ')	;;
+					*)	split "$d0$f1$d1$f2$d2" "[2]($f1)($f2)" "($f1)($f2)" ;;
+					esac
+				done
+			done
+		done
+		continue
+		;;
+	esac
+	f3=$1
+	case $f3 in
+	'-')	f3='' ;;
+	esac
+
+	shift
+	case $# in
+	0)	for d0 in '' ' '
+		do
+			for d1 in ':' ' :' ': ' ' : '
+			do
+				case ' ' in
+				$f1$d1|$d1$f2)	continue ;;
+				esac
+				for d2 in ' ' ':' ' :' ': ' ' : '
+				do
+					case $f2$d2 in
+					' ')	continue ;;
+					esac
+					case ' ' in
+					$f2$d2|$d2$f3)	continue ;;
+					esac
+					for d3 in '' ' ' ':' ' :' ': ' ' : '
+					do
+						case $f3$d3 in
+						'')	split "$d0$f1$d1$f2$d2$f3$d3" "[2]($f1)($f2)" "($f1)($f2)" ;;
+						' ')	;;
+						*)	x=$f2$d2$f3$d3
+							x=${x#' '}
+							x=${x%' '}
+							split "$d0$f1$d1$f2$d2$f3$d3" "[3]($f1)($f2)($f3)" "($f1)($x)"
+							;;
+						esac
+					done
+				done
+			done
+		done
+		continue
+		;;
+	esac
+done
+case $ksh_arith in
+1)	((tests=passed+failed)) ;;
+*)	tests=`expr $passed + $failed` ;;
+esac
+case $ordered in
+0)	ordered="" ;;
+*)	ordered=" ordered $ordered" ;;
+esac
+case $tests in
+$TESTS)	fatal="" ;;
+*)	fatal=" -- fundamental IFS error -- $TESTS tests expected"
+esac
+echo "# tests $tests passed $passed failed $failed$ordered$fatal"
diff --git a/tests/ifs.right b/tests/ifs.right
new file mode 100644
index 0000000..465efcf
--- /dev/null
+++ b/tests/ifs.right
@@ -0,0 +1,12 @@
+a:b:c
+a:b:c
+a:b:c
+a b c d e
+a:b:c:d:e
+a b c d e
+a:b:c:d:e
+a:b:c:d:e
+a b c d e
+a b c d e
+argv[1] = <file>
+argv[1] = <*>
diff --git a/tests/ifs.tests b/tests/ifs.tests
new file mode 100644
index 0000000..27f27dd
--- /dev/null
+++ b/tests/ifs.tests
@@ -0,0 +1,76 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+OIFS="$IFS"
+IFS=":$IFS"
+eval foo="a:b:c"
+IFS="$OIFS"
+echo $foo
+
+OIFS=$IFS
+IFS=":$IFS"
+foo=$(echo a:b:c)
+IFS=$OIFS
+
+for i in $foo
+do
+	echo $i
+done
+
+OIFS=$IFS
+IFS=":$IFS"
+foo=`echo a:b:c`
+IFS=$OIFS
+
+for i in $foo
+do
+	echo $i
+done
+
+DEFIFS=$' \t\n'
+
+# local copy of IFS that shadows global version
+function f
+{
+	typeset IFS=:
+
+	echo $1
+}
+
+function ff
+{
+	echo $1
+}
+
+f a:b:c:d:e
+x=a:b:c:d:e
+echo $x
+
+IFS=: ff a:b:c:d:e
+echo $x
+
+# doesn't get word split
+IFS=$DEFIFS
+# variable assignment doesn't use new value for word splitting
+IFS=: echo $x
+# but does this time because of the eval
+IFS=: eval echo \$x
+
+# in posix mode, assignments preceding special builtins and functions are global
+set -o posix
+IFS=: export x
+echo $x
+
+IFS="$DEFIFS"
+
+${THIS_SH} ./ifs1.sub
diff --git a/tests/ifs1.sub b/tests/ifs1.sub
new file mode 100644
index 0000000..6ea489a
--- /dev/null
+++ b/tests/ifs1.sub
@@ -0,0 +1,14 @@
+: ${TMPDIR:=/tmp}
+dir=bashtest-$$
+
+mkdir $TMPDIR/$dir || exit 1
+touch $TMPDIR/$dir/file || exit 2
+cd $TMPDIR/$dir || exit 3
+
+IFS='?*[]'
+recho *
+
+recho "*"
+
+cd $OLDPWD
+rm -rf $TMPDIR/$dir
diff --git a/tests/input-line.sh b/tests/input-line.sh
new file mode 100644
index 0000000..3f66c81
--- /dev/null
+++ b/tests/input-line.sh
@@ -0,0 +1,4 @@
+echo before calling input-line.sub
+${THIS_SH} ./input-line.sub
+this line for input-line.sub
+echo finished with input-line.sub
diff --git a/tests/input-line.sub b/tests/input-line.sub
new file mode 100644
index 0000000..7bc8df2
--- /dev/null
+++ b/tests/input-line.sub
@@ -0,0 +1,2 @@
+read line
+echo line read by $0 was \`$line\'
diff --git a/tests/input.right b/tests/input.right
new file mode 100644
index 0000000..8733feb
--- /dev/null
+++ b/tests/input.right
@@ -0,0 +1,3 @@
+before calling input-line.sub
+line read by ./input-line.sub was `this line for input-line.sub'
+finished with input-line.sub
diff --git a/tests/intl.right b/tests/intl.right
new file mode 100644
index 0000000..7da9919
--- /dev/null
+++ b/tests/intl.right
@@ -0,0 +1,57 @@
+é
+1
+AéB
+B
+B
+ok 1
+ok 2
+aéb
+0000000 141 303 251 142
+0000004
+-абвгдежзиклмноп - 16
+-абвгдежзиклмноп- 15
+-абвгд- 5
+1,0000
+1.0000
+1.0000
+1.0000
+1.0000
+1,0000
+1
+bytematch
+0000000 254 012
+0000002
+Passed all 1378 Unicode tests
+0000000 303 277 012
+0000003
+0000000 303 277 012
+0000003
+0000000 303 277 012
+0000003
+0000000 303 277 012
+0000003
+0000000 357 277 277 012
+0000004
+0000000 357 277 277 012
+0000004
+0000000 012
+0000001
+0000000 012
+0000001
+0000000 012
+0000001
+0000000 012
+0000001
+0000000 303 277 012
+0000003
+0000000 303 277 012
+0000003
+0000000 303 277 012
+0000003
+0000000 101 040 302 243 040 305 222 012
+0000010
+./unicode3.sub: line 5: $'5\247@3\231+\306S8\237\242\352\263': command not found
+./unicode3.sub: line 7: cd: $'5\247@3\231+\306S8\237\242\352\263': No such file or directory
+$'5\247@3\231+\306S8\237\242\352\263'
++ : $'5\247@3\231+\306S8\237\242\352\263'
++ set +x
diff --git a/tests/intl.tests b/tests/intl.tests
new file mode 100644
index 0000000..c3000fc
--- /dev/null
+++ b/tests/intl.tests
@@ -0,0 +1,68 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+export LC_ALL=en_US.UTF-8
+
+a=$'\303\251'
+
+echo "$a"
+
+echo ${#a}
+
+b=$'A\303\251B'
+
+echo "$b"
+
+echo ${b: -1}
+
+c=AeB
+
+echo ${c: -1}
+
+unset a
+a=$(printf '%b' 'A\303\251B')
+IFS=$(printf '%b' '\303\251')
+
+case "$a" in
+"A${IFS}B")	echo ok 1 ;;
+*)		echo bad 1 ;;
+esac
+
+set $a
+
+case $1 in
+A)		echo ok 2 ;;
+*)		echo bad 2 ;;
+esac
+
+set a b
+
+printf '%s\n' "$*"
+
+. ./test-glue-functions
+
+printf '%s' "$*" | od -b | _intl_normalize_spaces
+
+# display differences make this problematic
+${THIS_SH} ./intl1.sub
+
+# this tests both international handling in printf and temporary environments
+${THIS_SH} ./intl2.sub
+
+# test splitting on characters instead of bytes
+${THIS_SH} ./intl3.sub
+
+${THIS_SH} ./unicode1.sub 2>/dev/null
+${THIS_SH} ./unicode2.sub
+
+${THIS_SH} ./unicode3.sub 2>&1
diff --git a/tests/intl1.sub b/tests/intl1.sub
new file mode 100644
index 0000000..a03648f
--- /dev/null
+++ b/tests/intl1.sub
@@ -0,0 +1,11 @@
+LC_ALL=en_US.UTF-8
+LANG=en_US.UTF-8
+
+var='абвгдежзиклмноп '
+echo -"$var"- ${#var}
+
+read foo <<< "$var"
+echo -"$foo"- ${#foo}
+
+read -n 5 foo <<< "$var"
+echo -"$foo"- ${#foo}
diff --git a/tests/intl2.sub b/tests/intl2.sub
new file mode 100644
index 0000000..64961bc
--- /dev/null
+++ b/tests/intl2.sub
@@ -0,0 +1,11 @@
+unset LC_ALL LC_NUMERIC
+export LANG=de_DE.UTF-8
+printf '%.4f\n' 1
+
+LANG=C printf '%.4f\n' 1
+LANG=C /usr/bin/printf '%.4f\n' 1
+
+env LANG=C printf '%.4f\n' 1
+(LANG=C; printf '%.4f\n' 1)
+
+printf '%.4f\n' 1
diff --git a/tests/intl3.sub b/tests/intl3.sub
new file mode 100644
index 0000000..56c8678
--- /dev/null
+++ b/tests/intl3.sub
@@ -0,0 +1,36 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+. ./test-glue-functions
+
+# more tests to make sure that IFS splits on characters, not bytes
+export LANG=en_US.UTF-8
+
+euro=$'\342\202\254'
+o342=$'\342'
+o202=$'\202'
+o254=$'\254'
+
+IFS=$o254
+t=+$euro+
+set -- $t
+
+echo "$#"
+
+# but matching still occurs on bytes if we don't have a valid multibyte char
+case $euro in
+*$o202*)	echo bytematch ;;
+*)		echo mbchar match ;;
+esac
+
+echo "${euro##*$o202}" | od -b | _intl_normalize_spaces
diff --git a/tests/invert.right b/tests/invert.right
new file mode 100644
index 0000000..5a9239a
--- /dev/null
+++ b/tests/invert.right
@@ -0,0 +1,10 @@
+1
+1
+1
+0
+0
+1
+0
+1
+0
+1
diff --git a/tests/invert.tests b/tests/invert.tests
new file mode 100644
index 0000000..f339d41
--- /dev/null
+++ b/tests/invert.tests
@@ -0,0 +1,32 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# tests of return value inversion
+# placeholder for future expansion
+
+# user subshells (...) did this wrong in bash versions before 2.04
+
+! ( echo hello | grep h >/dev/null 2>&1 ); echo $?
+! echo hello | grep h >/dev/null 2>&1 ; echo $?
+
+! true ; echo $?
+! false; echo $?
+
+! (false) ; echo $?
+! (true); echo $?
+
+! true | false ; echo $?
+! false | true ; echo $?
+
+! (true | false) ; echo $?
+! (false | true) ; echo $?
diff --git a/tests/iquote.right b/tests/iquote.right
new file mode 100644
index 0000000..9476128
--- /dev/null
+++ b/tests/iquote.right
@@ -0,0 +1,92 @@
+argv[1] = <xxxyyy>
+argv[1] = <xxx^?yyy>
+argv[1] = <xy>
+argv[1] = <x^?y>
+argv[1] = <-->
+argv[1] = <-^?->
+argv[1] = <>
+argv[1] = <>
+argv[1] = <^?>
+argv[1] = <^?yy>
+0x7f
+0x7f
+0x7f
+argv[1] = <^?>
+argv[1] = <^?@>
+argv[1] = <@^?@>
+argv[1] = <@^?>
+argv[1] = <^?>
+argv[1] = <^?@>
+argv[1] = <@^?@>
+argv[1] = <@^?>
+argv[1] = <1>
+argv[2] = <^?>
+argv[3] = <^?>
+argv[1] = <2>
+argv[2] = <^?a>
+argv[3] = <^?a>
+argv[1] = <2>
+argv[2] = <^?a>
+argv[3] = <^?a>
+argv[1] = <3>
+argv[2] = <^?aa>
+argv[3] = <^?aa>
+argv[1] = <>
+argv[1] = <-->
+argv[1] = <-->
+argv[1] = <^?>
+argv[1] = <-^?->
+argv[1] = <^?>
+argv[1] = <-^?->
+ok
+argv[1] = <aaa^?bbb>
+argv[1] = <ccc^?ddd>
+argv[1] = <eee^?fff>
+argv[1] = <ggg^?hhh>
+argv[1] = <aaabbb>
+argv[1] = <cccddd>
+argv[1] = <eeefff>
+argv[1] = <ggghhh>
+argv[1] = <aaa^?bbb>
+argv[1] = <ccc^?ddd>
+argv[1] = <eee^?fff>
+argv[1] = <ggg^?hhh>
+argv[1] = <aaabbb>
+argv[1] = <cccddd>
+argv[1] = <eeefff>
+argv[1] = <ggghhh>
+argv[1] = <aaa^?bbb>
+argv[1] = <ccc^?ddd>
+argv[1] = <eee^?fff>
+argv[1] = <ggg^?hhh>
+argv[1] = <xy>
+argv[1] = <xy>
+argv[1] = <xy>
+argv[1] = <x^?y>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <^?>
+argv[1] = <^? >
+argv[1] = < ^?>
+argv[1] = < ^?>
+argv[1] = < ^?>
+argv[1] = < ^?>
+argv[1] = < ^?>
+argv[1] = < ^?>
+argv[1] = < ^?>
+argv[1] = < ^?>
+argv[1] = < ^?>
+argv[1] = < ^?x>
+argv[1] = < ^?>
+argv[1] = < ^?>
+argv[1] = < ^?>
+argv[1] = < ^?x>
+argv[1] = <^?x>
+argv[1] = <^?>
+argv[1] = < ^? x>
+argv[1] = <^? x>
+argv[1] = <^? >
diff --git a/tests/iquote.tests b/tests/iquote.tests
new file mode 100644
index 0000000..8411c8a
--- /dev/null
+++ b/tests/iquote.tests
@@ -0,0 +1,158 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# bug in bash up to and including bash-3.0 (including patches)
+#
+# problem is conflict between CTLNUL used internally to denote quoted null
+# characters and its value (0x7f) appearing in the expansion of a variable
+#
+unset x
+recho "xxx${x}yyy"
+
+y=$'\177'
+recho "xxx${y}yyy"
+
+unset y
+
+unset undef
+
+set ""
+recho ${undef-"x$*y"}
+
+set $'\177'
+recho ${undef-"x$*y"}
+
+shift $#
+
+f()
+{
+	recho "-${*-x}-"
+}
+
+f ''
+f $'\177'
+
+unset -f f
+
+x=12345
+
+recho "${x:6:1}"
+
+x=
+recho "${x:0:1}"
+
+y=$'\177'
+recho "${y:0:1}"
+
+y=xxx$'\177'yyy
+recho "${y:3:3}"
+
+unset x y
+
+eval tmp=`printf "$'\\\\\x%x'\n" 127`
+printf "%#1x\n" "'$tmp"
+
+x=$'\177'
+printf "%#1x\n" "'$x"
+
+a=127
+eval c=\$\'\\$(printf '%o' $a)\'
+printf "%#1x\n" "'$c"
+
+recho "$c"
+recho "$c"@
+recho @"$c"@
+recho @"$c"
+
+recho "$c"
+recho "$c@"
+recho "@$c@"
+recho "@$c"
+
+unset tmp x a c
+
+qtest()
+{
+	recho ${#q} "${q}" ${q}
+}
+
+q=$'\x7f'
+qtest
+
+q=${q}a
+qtest
+
+q=$'\x7fa'
+qtest
+
+q="${q}a"
+qtest
+
+unset -f qtest
+unset q
+
+set -- ''
+recho "${*:1}"
+recho  ${*:1}
+recho  -${*:1}-
+recho  -"${*:1}"-
+
+set $'\177'
+recho "${*:1}"
+recho "-${*:1}-"
+
+recho  ${*:1}
+recho -${*:1}-
+
+shift $#
+
+DEL=`awk 'END{printf("%c", 0+127)}' </dev/null`
+T1=a\ $DEL
+T2="a $DEL"
+set -- x $(echo $T1|wc -c) $(echo $T2|wc -c); shift
+L1=$1; L2=$2
+case "$L1/$L2" in
+4/4) echo ok;;
+*) echo CTLNUL bug: L1=$L1, L2=$L2;;
+esac
+
+x=$'\177'
+recho "aaa${x}bbb"
+recho ccc"${x}"ddd
+recho eee"$x"fff
+recho ggg"$(echo $x)"hhh
+
+x=
+recho "aaa${x}bbb"
+recho ccc"${x}"ddd
+recho eee"$x"fff
+recho ggg"$(echo $x)"hhh
+
+set -- $'\177'
+recho "aaa${1}bbb"
+recho ccc"${1}"ddd
+recho eee"$1"fff
+recho ggg"$(echo $1)"hhh
+
+set -- ""
+recho "aaa${1}bbb"
+recho ccc"${1}"ddd
+recho eee"$1"fff
+recho ggg"$(echo $1)"hhh
+
+recho aaa$'\177'bbb
+recho ccc""ddd
+recho "eeefff"
+recho ggg"$(echo $'\177')"hhh
+
+${THIS_SH} ./iquote1.sub
diff --git a/tests/iquote1.sub b/tests/iquote1.sub
new file mode 100644
index 0000000..685a80e
--- /dev/null
+++ b/tests/iquote1.sub
@@ -0,0 +1,56 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# Problems with variables that expand to 0x7f and quoted nulls in the same
+# expansion -- affects bash versions 4.0-post 4.2
+a=x
+b=
+del=$'\x7f'
+
+set ""
+
+recho ${undef-"x$*y"}
+recho "x$*y"
+recho x"$*"y
+recho x"$del"y
+
+recho ${undef-"$@"}
+recho "$@"
+recho "${@}"
+recho ${undef-"$*"}
+recho "$*"
+recho "${*}"
+
+recho "$del${a#x}"
+recho "$del ${a#x}"
+recho " $del${a#x}"
+
+recho " $del$b"
+recho " $del${b}"
+recho " $del${b#x}"
+recho " $del${a#x}"
+
+recho " $del${a%x}"
+recho " $del${a:0:0}"
+recho " $del"${a:0:0}
+recho " $del""${a:0:0}"
+recho " $del${a}"
+recho " $del"
+recho " ${del}${a:0:0}"
+recho " ${del:0:1}${a:0:0}"
+recho " ${del:0:1}${a}"
+recho "${del:0:1}${a#d}"
+recho "${del:0:1}${a#x}"
+recho " ${del:0:1} ${a}"
+recho "${del:0:1} ${a#d}"
+recho "${del:0:1} ${a#x}"
diff --git a/tests/jobs.right b/tests/jobs.right
new file mode 100644
index 0000000..5d03b76
--- /dev/null
+++ b/tests/jobs.right
@@ -0,0 +1,118 @@
+./jobs2.sub: line 9: fg: job 1 started without job control
+fg: 1
+Waiting for job 0
+job 0 returns 0
+Waiting for job 1
+job 1 returns 0
+Waiting for job 2
+job 2 returns 0
+Waiting for job 3
+job 3 returns 0
+Waiting for job 4
+job 4 returns 0
+Waiting for job 5
+job 5 returns 0
+Waiting for job 6
+job 6 returns 0
+Waiting for job 7
+job 7 returns 0
+[1]   Running                 sleep 2 &
+[2]   Running                 sleep 2 &
+[3]   Running                 sleep 2 &
+[4]-  Running                 sleep 2 &
+[5]+  Running                 ( sleep 2; exit 4 ) &
+4
+0
+i killed it
+12
+[1]-  Running                 sleep 20 &
+[3]+  Running                 sleep 20 &
+5: ok 1
+./jobs5.sub: line 40: wait: %8: no such job
+2: ok 2
+2: ok 3
+child1 exit status 0
+[1]+ Running sleep 20 &
+./jobs7.sub: line 5: fg: no current jobs
+[1]+ Running sleep 20 &
+0
+./jobs.tests: line 40: wait: %1: no such job
+./jobs.tests: line 45: fg: no job control
+wait-for-pid
+wait-errors
+./jobs.tests: line 58: wait: `1-1': not a pid or valid job spec
+./jobs.tests: line 59: wait: `-4': not a pid or valid job spec
+wait-for-background-pids
+async list wait-for-background-pids
+async list wait for child
+forked
+wait-when-no-children
+posix jobs output
+[1]+  Done                    sleep 1
+wait-for-job
+./jobs.tests: line 84: wait: %2: no such job
+127
+async list wait-for-job
+forked
+fg-bg 1
+sleep 2
+fg-bg 2
+sleep 2
+fg-bg 3
+sleep 2
+fg-bg 4
+sleep 2
+fg-bg 5
+./jobs.tests: line 111: fg: %2: no such job
+./jobs.tests: line 112: bg: job 1 already in background
+fg-bg 6
+./jobs.tests: line 119: fg: -s: invalid option
+fg: usage: fg [job_spec]
+./jobs.tests: line 120: bg: -s: invalid option
+bg: usage: bg [job_spec ...]
+./jobs.tests: line 125: disown: -s: invalid option
+disown: usage: disown [-h] [-ar] [jobspec ... | pid ...]
+./jobs.tests: line 129: disown: %1: no such job
+./jobs.tests: line 132: disown: %2: no such job
+wait-for-non-child
+./jobs.tests: line 135: wait: pid 1 is not a child of this shell
+127
+3 -- 1 2 3 -- 1 - 2 - 3
+[1]   Running                 sleep 300 &
+[2]-  Running                 sleep 350 &
+[3]+  Running                 sleep 400 &
+running jobs:
+[1]   Running                 sleep 300 &
+[2]-  Running                 sleep 350 &
+[3]+  Running                 sleep 400 &
+./jobs.tests: line 152: kill: %4: no such job
+./jobs.tests: line 154: jobs: %4: no such job
+current job:
+[3]+  Running                 sleep 400 &
+previous job:
+[2]-  Running                 sleep 350 &
+after kill -STOP
+running jobs:
+[1]   Running                 sleep 300 &
+[3]-  Running                 sleep 400 &
+stopped jobs:
+[2]+  Stopped                 sleep 350
+after disown
+[2]+  Stopped                 sleep 350
+[3]-  Running                 sleep 400 &
+running jobs:
+[3]-  Running                 sleep 400 &
+stopped jobs:
+[2]+  Stopped                 sleep 350
+after kill -s CONT
+running jobs:
+[2]+  Running                 sleep 350 &
+[3]-  Running                 sleep 400 &
+stopped jobs:
+after kill -STOP, backgrounding %3:
+[3]+ sleep 400 &
+killing...
+done
+after KILL -STOP, foregrounding %1
+sleep 4
+done
diff --git a/tests/jobs.tests b/tests/jobs.tests
new file mode 100644
index 0000000..dacdc15
--- /dev/null
+++ b/tests/jobs.tests
@@ -0,0 +1,209 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# test out %+, jobs -p, and $! agreement in a subshell first
+${THIS_SH} ./jobs1.sub
+
+# test out fg/bg failure in a subshell
+${THIS_SH} ./jobs2.sub
+
+# test out behavior of waiting for background pids -- bug in versions
+# before 2.03
+${THIS_SH} ./jobs3.sub
+
+# test out behavior of using job control notation when job control is not
+# active
+${THIS_SH} ./jobs4.sub
+
+# test out wait -n framework
+${THIS_SH} ./jobs5.sub
+
+# test out wait -f framework
+${THIS_SH} ./jobs6.sub
+
+${THIS_SH} ./jobs7.sub
+
+jobs
+echo $?
+
+# a no-such-job error, since we can use job control notation without job control
+wait %1
+
+# make sure we can't fg a job started when job control was not active
+sleep 30 &
+pid=$!
+fg %1
+# make sure the killed processes don't cause a message
+exec 5>&2
+exec 2>/dev/null
+kill -n 9 $pid
+wait    # make sure we reap the processes while stderr is still redirected
+exec 2>&5
+
+echo wait-for-pid
+sleep 4 &
+wait $!
+
+echo wait-errors
+wait 1-1
+wait -- -4
+
+echo wait-for-background-pids
+sleep 2 &
+sleep 4 &
+wait
+
+echo async list wait-for-background-pids
+sleep 2 & sleep 4 &
+wait
+
+echo async list wait for child
+sleep 2 & echo forked
+wait
+
+echo wait-when-no-children
+wait
+
+echo posix jobs output
+${THIS_SH} -o posix -c 'sleep 1 & P=$! ; sleep 2; jobs; wait'
+
+set -m
+
+echo wait-for-job
+sleep 3 &
+wait %2		# this should be a no-such-job error
+echo $?
+wait %1
+
+echo async list wait-for-job
+sleep 2 & echo forked
+wait %1
+
+echo fg-bg 1
+sleep 2 &
+%1
+
+echo fg-bg 2
+sleep 2 &
+fg %%
+
+echo fg-bg 3
+sleep 2 &
+fg %s
+
+echo fg-bg 4
+sleep 2 &
+fg %?ee
+
+# these next two are error cases
+echo fg-bg 5
+sleep 2 &
+fg %2		# this should be a no-such-job error
+bg %1		# this should be a `bg background job?' error
+wait
+
+# these may someday mean to start the jobs, but not print the line
+# describing the status, but for now they are errors
+echo fg-bg 6
+sleep 2 &
+fg -s %1
+bg -s %1
+wait
+
+# someday this may mean to disown all stopped jobs, but for now it is
+# an error
+disown -s
+
+# this is an error -- the job with the pid that is the value of $! is
+# retained only until a `wait' is performed
+disown %1
+
+# this, however, is an error
+disown %2
+
+echo wait-for-non-child
+wait 1
+echo $?
+
+exit 1 | exit 2 | exit 3
+echo $? -- ${PIPESTATUS[@]} -- ${PIPESTATUS[0]} - ${PIPESTATUS[1]} - ${PIPESTATUS[2]}
+
+sleep 300 &
+sleep300pid=$!
+sleep 350 &
+sleep 400 &
+
+jobs
+
+echo running jobs:
+jobs -r
+
+# should be an error
+kill -n 1 %4
+# should be an error
+jobs %4
+echo current job:
+jobs %+
+echo previous job:
+jobs %-
+
+kill -STOP %2
+sleep 3	# give time for the shell to get the stop notification
+echo after kill -STOP
+echo running jobs:
+jobs -r
+echo stopped jobs:
+jobs -s
+
+disown %1
+
+echo after disown
+jobs
+echo running jobs:
+jobs -r
+echo stopped jobs:
+jobs -s
+
+kill -s CONT %2
+echo after kill -s CONT
+echo running jobs:
+jobs -r
+echo stopped jobs:
+jobs -s
+
+kill -STOP %3
+sleep 3	# give time for the shell to get the stop notification
+echo after kill -STOP, backgrounding %3:
+bg %3
+
+disown -h %2
+
+# make sure the killed processes don't cause a message
+exec 5>&2
+exec 2>/dev/null
+
+echo killing...
+kill -n 9 $sleep300pid
+kill -n 9 %2 %3
+wait	# make sure we reap the processes while stderr is still redirected
+echo done
+
+exec 2>&5
+
+sleep 4 &
+kill -STOP %1
+sleep 2	# give time for the shell to get the stop notification
+echo after KILL -STOP, foregrounding %1
+fg %1
+
+echo done
diff --git a/tests/jobs1.sub b/tests/jobs1.sub
new file mode 100644
index 0000000..84919d9
--- /dev/null
+++ b/tests/jobs1.sub
@@ -0,0 +1,30 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# make sure that jobs -p, %+, and $! all agree
+set -m
+sleep 60 &
+
+FN=$TMPDIR/jobs-pid.$$
+
+pid1=$!
+jobs -p %+ > $FN
+pid2=$(< $FN)
+rm $FN
+
+if [ $pid1 -ne $pid2 ]; then
+	echo 'oops - $! and jobs -p %+ disagree!'
+fi
+
+exec 2>/dev/null
+kill -9 $pid1
diff --git a/tests/jobs2.sub b/tests/jobs2.sub
new file mode 100644
index 0000000..496519b
--- /dev/null
+++ b/tests/jobs2.sub
@@ -0,0 +1,13 @@
+# make sure fg and bg don't work on jobs started without job control,
+# even if they are executed when job control is active
+set +o monitor
+
+sleep 30 &
+pid=$!
+
+set -m
+fg %1
+echo fg: $?
+
+exec 2>/dev/null
+kill -9 $pid
diff --git a/tests/jobs3.sub b/tests/jobs3.sub
new file mode 100644
index 0000000..1337fc1
--- /dev/null
+++ b/tests/jobs3.sub
@@ -0,0 +1,39 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+NJOB=8
+i=0
+
+while [ $i -lt $NJOB ]
+do
+    /bin/sh -c "sleep 4; exit 0" &
+    rv=$?
+    pid=$!
+    eval bg_pid_$i=$pid
+#    echo $$: Job $i: pid is $pid rv=$rv
+    i=$((i + 1))
+done
+
+
+
+i=0
+while [ $i -lt $NJOB ]
+do
+    eval wpid=\$bg_pid_$i
+    echo Waiting for job $i #'('pid $wpid')'
+    wait $wpid
+    rv=$?
+    echo job $i returns $rv
+    i=$((i + 1))
+done
diff --git a/tests/jobs4.sub b/tests/jobs4.sub
new file mode 100644
index 0000000..7ecd712
--- /dev/null
+++ b/tests/jobs4.sub
@@ -0,0 +1,37 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# test being able to use job control notation in jobs/kill/wait without
+# job control active, as the SUS requires
+
+sleep 2 &
+
+sleep 2 &
+sleep 2 &
+sleep 2 &
+(sleep 2 ; exit 4) &
+
+jobs
+
+wait %%
+echo $?
+
+wait %1
+echo $?
+
+wait
+
+# the sleep is intended to give the kill time to execute before the job
+# exits
+(sleep 1 ; cat ) &
+kill -1 %% && echo i killed it || echo could not kill it
diff --git a/tests/jobs5.sub b/tests/jobs5.sub
new file mode 100644
index 0000000..e6ffb44
--- /dev/null
+++ b/tests/jobs5.sub
@@ -0,0 +1,61 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+# framework to test new `wait -n' option that waits for any job to finish
+
+set -m
+
+sleep 20 &
+{ sleep 2; exit 12; } &
+sleep 20 &
+
+wait -n
+echo $?
+
+jobs
+disown -a
+
+{ sleep 1 ; exit 4; } &
+{ sleep 2 ; exit 5; } & bgpid1=$!
+{ sleep 4 ; exit 6; } &
+
+wait -p wvar -n %2 %3
+case "$wvar" in
+$bgpid1)	echo $?: ok 1;;
+*)		echo bad 1;;
+esac
+
+{ sleep 1 ; exit 2; } & bgpid2=$!
+wait -p wvar -n %8 $!
+case $wvar in
+$bgpid2)	echo $?: ok 2;;
+*)		echo bad 2;;
+esac
+
+disown -a
+
+{ sleep 3; exit 1; } & { sleep 1; exit 2; } & bgpid3=$!
+{ sleep 3; exit 3; } & { sleep 3; exit 4; } &
+
+wait -n -p wpid %1 %2 %3 %4
+
+case $wpid in
+$bgpid3)	echo $?: ok 3;;
+*)		echo bad 3 ;;
+esac
+
+disown -a
+
+unset bgpid1 bgpid2 bgpid3
+unset wpid
diff --git a/tests/jobs6.sub b/tests/jobs6.sub
new file mode 100644
index 0000000..9ed59ee
--- /dev/null
+++ b/tests/jobs6.sub
@@ -0,0 +1,14 @@
+# framework to test `wait -f' which forces wait until a job exits
+set -o monitor
+sleep 5 &
+child1=$!
+
+( sleep 1; kill -STOP $child1 ; sleep 1 ; kill -CONT $child1 )&
+
+child2=$!
+
+wait -f %1
+echo child1 exit status $?
+
+wait $child2
+exit 0
diff --git a/tests/jobs7.sub b/tests/jobs7.sub
new file mode 100644
index 0000000..3e76db3
--- /dev/null
+++ b/tests/jobs7.sub
@@ -0,0 +1,6 @@
+# make sure fg in a subshell doesn't try to start a parent's job
+set -m
+sleep 20 &
+echo $(jobs)
+echo $(fg %% ; jobs)
+kill %1
diff --git a/tests/lastpipe.right b/tests/lastpipe.right
new file mode 100644
index 0000000..cca5938
--- /dev/null
+++ b/tests/lastpipe.right
@@ -0,0 +1,20 @@
+after 1: foo = a b c
+after 2: tot = 6
+after: 7
+last = c
+1 -- 142 1
+0 -- 0 1 0
+1 -- 0 0 1
+1 -- 0 0 1
+1 -- 0 1 0
+lastpipe1.sub returns 14
+A1
+A2
+B1
+B2
+HI
+A1
+A2
+B1
+B2
+HI -- 42 -- 0 42
diff --git a/tests/lastpipe.tests b/tests/lastpipe.tests
new file mode 100644
index 0000000..775e81d
--- /dev/null
+++ b/tests/lastpipe.tests
@@ -0,0 +1,73 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+binfalse()
+{
+	$binfalse || return 1	# normalize return value
+}
+
+if [ -x /usr/bin/true ]; then
+	bintrue=/usr/bin/true
+elif [ -x /bin/true ]; then
+	bintrue=/bin/true
+else
+	bintrue=true
+fi
+if [ -x /usr/bin/false ]; then
+	binfalse=/usr/bin/false
+elif [ -x /bin/false ]; then
+	binfalse=/bin/false
+else
+	binfalse=false
+fi
+
+shopt -s lastpipe
+
+unset foo bar
+echo a b c | read foo
+echo after 1: foo = $foo
+
+unset tot
+declare -i tot
+printf "%d\n" 1 2 3 | while read foo; do tot+=$foo; done
+echo after 2: tot = $tot
+
+unset bar
+echo g h i | bar=7
+echo after: $bar
+
+unset foo last
+printf "%s\n" a b c | while read foo; do last=$foo; done
+echo last = $last
+
+exit 142 | false
+echo $? -- ${PIPESTATUS[@]}
+
+true | false | $bintrue
+echo $? -- ${PIPESTATUS[@]}
+
+true | $bintrue | false
+echo $? -- ${PIPESTATUS[@]}
+
+set -o pipefail
+true | $bintrue | false
+echo $? -- ${PIPESTATUS[@]}
+
+true | binfalse | true
+echo $? -- ${PIPESTATUS[@]}
+set +o pipefail
+
+${THIS_SH} ./lastpipe1.sub
+echo lastpipe1.sub returns $?
+
+${THIS_SH} ./lastpipe2.sub
diff --git a/tests/lastpipe1.sub b/tests/lastpipe1.sub
new file mode 100644
index 0000000..43711e3
--- /dev/null
+++ b/tests/lastpipe1.sub
@@ -0,0 +1,5 @@
+# with lastpipe set, exit at the end of a pipeline exits
+# the calling shell
+shopt -s lastpipe
+exit 142 | exit 14
+echo after: $?
diff --git a/tests/lastpipe2.sub b/tests/lastpipe2.sub
new file mode 100644
index 0000000..a460286
--- /dev/null
+++ b/tests/lastpipe2.sub
@@ -0,0 +1,43 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+shopt -s lastpipe
+echo -e 'A\nB' | while read letter; do
+    echo -e '1\n2' | while read digit; do
+        echo $letter$digit
+    done
+done
+
+myPipefunc()
+{
+    cat | tee $TMPDIR/outfile
+}
+echo HI | myPipefunc
+
+echo -e 'A\nB' | while read letter; do
+    echo -e '1\n2' | while read digit; do
+        echo $letter$digit | myPipefunc
+    done
+done
+
+rm -f $TMPDIR/outfile
+
+unset -f myPipefunc
+myPipefunc()
+{
+    cat | read var
+    return 42
+}
+echo HI | myPipefunc
+
+echo $var -- $? -- ${PIPESTATUS[@]}
diff --git a/tests/mapfile.data b/tests/mapfile.data
new file mode 100644
index 0000000..4f1d3ce
--- /dev/null
+++ b/tests/mapfile.data
@@ -0,0 +1,17 @@
+[0] Abcdefghijklmnop
+[1] aBcdefghijklmnop
+[2] abCdefghijklmnop
+[3] abcDefghijklmnop
+[4] abcdEfghijklmnop
+[5] abcdeFghijklmnop
+[6] abcdefGhijklmnop
+[7] abcdefgHijklmnop
+[8] abcdefghIjklmnop
+[9] abcdefghiJklmnop
+[a] abcdefghijKlmnop
+[b] abcdefghijkLmnop
+[c] abcdefghijklMnop
+[d] abcdefghijklmNop
+[e] abcdefghijklmnOp
+[f] abcdefghijklmnoP
+a
\ No newline at end of file
diff --git a/tests/mapfile.right b/tests/mapfile.right
new file mode 100644
index 0000000..143d6dd
--- /dev/null
+++ b/tests/mapfile.right
@@ -0,0 +1,169 @@
+[0] Abcdefghijklmnop
+[1] aBcdefghijklmnop
+[2] abCdefghijklmnop
+[3] abcDefghijklmnop
+[4] abcdEfghijklmnop
+[5] abcdeFghijklmnop
+[6] abcdefGhijklmnop
+[7] abcdefgHijklmnop
+[8] abcdefghIjklmnop
+[9] abcdefghiJklmnop
+[a] abcdefghijKlmnop
+[b] abcdefghijkLmnop
+[c] abcdefghijklMnop
+[d] abcdefghijklmNop
+[e] abcdefghijklmnOp
+[f] abcdefghijklmnoP
+a[0] Abcdefghijklmnop
+[1] aBcdefghijklmnop
+[2] abCdefghijklmnop
+[3] abcDefghijklmnop
+[4] abcdEfghijklmnop
+[5] abcdeFghijklmnop
+[6] abcdefGhijklmnop
+[7] abcdefgHijklmnop
+[8] abcdefghIjklmnop
+[9] abcdefghiJklmnop
+[a] abcdefghijKlmnop
+[b] abcdefghijkLmnop
+[c] abcdefghijklMnop
+[d] abcdefghijklmNop
+[e] abcdefghijklmnOp
+[f] abcdefghijklmnoP
+a
+0 [0] Abcdefghijklmnop
+
+1 [1] aBcdefghijklmnop
+
+2 [2] abCdefghijklmnop
+
+3 [3] abcDefghijklmnop
+
+4 [4] abcdEfghijklmnop
+
+5 [5] abcdeFghijklmnop
+
+6 [6] abcdefGhijklmnop
+
+7 [7] abcdefgHijklmnop
+
+8 [8] abcdefghIjklmnop
+
+9 [9] abcdefghiJklmnop
+
+10 [a] abcdefghijKlmnop
+
+11 [b] abcdefghijkLmnop
+
+12 [c] abcdefghijklMnop
+
+13 [d] abcdefghijklmNop
+
+14 [e] abcdefghijklmnOp
+
+15 [f] abcdefghijklmnoP
+
+16 a
+2 [2] abCdefghijklmnop
+
+5 [5] abcdeFghijklmnop
+
+8 [8] abcdefghIjklmnop
+
+11 [b] abcdefghijkLmnop
+
+14 [e] abcdefghijklmnOp
+
+[0] Abcdefghijklmnop
+[1] aBcdefghijklmnop
+[2] abCdefghijklmnop
+[3] abcDefghijklmnop
+[4] abcdEfghijklmnop
+[5] abcdeFghijklmnop
+[6] abcdefGhijklmnop
+[7] abcdefgHijklmnop
+[8] abcdefghIjklmnop
+[9] abcdefghiJklmnop
+[a] abcdefghijKlmnop
+[b] abcdefghijkLmnop
+[c] abcdefghijklMnop
+[d] abcdefghijklmNop
+[e] abcdefghijklmnOp
+[f] abcdefghijklmnoP
+a
+[0] aaa
+[1] aaa
+[2] aaa
+[3] aaa
+[4] aaa
+[5] aaa
+[6] aaa
+[7] aaa
+[8] aaa
+[9] aaa
+[0] Abcdefghijklmnop
+[1] aBcdefghijklmnop
+[2] abCdefghijklmnop
+[3] abcDefghijklmnop
+[4] abcdEfghijklmnop
+[5] abcdeFghijklmnop
+[6] abcdefGhijklmnop
+[7] abcdefgHijklmnop
+[8] abcdefghIjklmnop
+[9] abcdefghiJklmnop
+[a] abcdefghijKlmnop
+[b] abcdefghijkLmnop
+[c] abcdefghijklMnop
+[d] abcdefghijklmNop
+[e] abcdefghijklmnOp
+[f] abcdefghijklmnoP
+a
+[27] aaa
+[28] aaa
+[29] aaa
+[0] aaa
+[1] aaa
+[2] aaa
+[3] aaa
+[4] aaa
+[5] aaa
+[6] aaa
+[7] aaa
+[8] aaa
+[9] aaa
+[0] Abcdefghijklmnop
+[1] aBcdefghijklmnop
+[2] abCdefghijklmnop
+[3] abcDefghijklmnop
+[4] abcdEfghijklmnop
+[15] aaa
+[16] aaa
+[17] aaa
+[18] aaa
+[19] aaa
+[20] aaa
+[21] aaa
+[22] aaa
+[23] aaa
+[24] aaa
+[25] aaa
+[26] aaa
+[27] aaa
+[28] aaa
+[29] aaa
+1 2 3 4 5
+foo 0 1
+
+foo 1 2
+
+foo 2 3
+
+foo 3 4
+
+foo 4 5
+
+0 abc
+1 def
+2 ghi
+3 jkl
+abc def ghi jkl
diff --git a/tests/mapfile.tests b/tests/mapfile.tests
new file mode 100644
index 0000000..01f1f2e
--- /dev/null
+++ b/tests/mapfile.tests
@@ -0,0 +1,57 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+declare -a A
+mapfile A < mapfile.data
+for (( i = 0 ; i < ${#A[@]} ; i++ )); do
+    echo -n "${A[${i}]}"
+done
+
+declare -a B
+mapfile -t B < mapfile.data
+for (( i = 0 ; i < ${#B[@]} ; i++ )); do
+    echo "${B[${i}]}"
+done
+
+mapfile -C "echo" -c 1 A < mapfile.data
+mapfile -C "echo" -c 3 A < mapfile.data
+mapfile -C "echo" -c 19 A < mapfile.data
+
+declare -a C
+mapfile -t -u 3 C 3< mapfile.data < mapfile.tests
+for (( i = 0 ; i < ${#C[@]} ; i++ )); do
+    echo "${C[${i}]}"
+done
+
+
+declare -a D
+for (( i = 0 ; i < 30; i++ )); do
+    D[${i}]="[$i] aaa"
+done
+mapfile -O 10 -t D < mapfile.data
+for (( i = 0 ; i < ${#D[@]} ; i++ )); do
+    echo "${D[${i}]}"
+done
+
+declare -a E
+for (( i = 0 ; i < 30; i++ )); do
+    E[${i}]="[$i] aaa"
+done
+mapfile -O 10 -n 5 -t E < mapfile.data
+for (( i = 0 ; i < ${#E[@]} ; i++ )); do
+    echo "${E[${i}]}"
+done
+
+${THIS_SH} ./mapfile1.sub
+
+${THIS_SH} ./mapfile2.sub
diff --git a/tests/mapfile1.sub b/tests/mapfile1.sub
new file mode 100644
index 0000000..b3d77f9
--- /dev/null
+++ b/tests/mapfile1.sub
@@ -0,0 +1,11 @@
+: ${TMPDIR:=/tmp}
+FILE=$TMPDIR/file
+
+trap 'rm -f $FILE' 0 1 2 3 6 15
+printf "%d\n" {1..20} > $FILE
+
+mapfile -n 5 array < $FILE
+echo ${array[@]}
+
+mapfile -n 5 -c 1 -C "echo foo" array  < $FILE
+mapfile -n 5 -c 1 -C "echo foo" array  < /dev/null
diff --git a/tests/mapfile2.sub b/tests/mapfile2.sub
new file mode 100644
index 0000000..771a992
--- /dev/null
+++ b/tests/mapfile2.sub
@@ -0,0 +1,6 @@
+# test mapfile -d DELIM functionality added after bash-4.3
+
+printf "abc\0def\0ghi\0jkl\0" | {
+	mapfile -C echo -c 1 -d '' A
+	echo "${A[@]}"
+}
diff --git a/tests/misc/dev-tcp.tests b/tests/misc/dev-tcp.tests
new file mode 100644
index 0000000..0f3a228
--- /dev/null
+++ b/tests/misc/dev-tcp.tests
@@ -0,0 +1,16 @@
+exec 9<>/dev/tcp/129.22.8.162/25
+
+read banner <&9
+echo "$banner"
+
+echo quit >&9
+
+read msg <&9
+echo "$msg"
+
+exec 9<&-
+
+# nifty date command that queries the date/time server
+cat < /dev/tcp/129.22.8.102/13
+
+exit 0
diff --git a/tests/misc/perf-script b/tests/misc/perf-script
new file mode 100644
index 0000000..e1172a9
--- /dev/null
+++ b/tests/misc/perf-script
@@ -0,0 +1,81 @@
+#!/bin/bash
+
+typeset -i m2 m1 M n2 n1 N m n
+typeset -i MM=5 NN=5
+
+case $# in
+  0) :
+  ;;
+  1) MM=$1; NN=$1
+  ;;
+  2) MM=$1; NN=$2
+  ;;
+  *) echo 1>&2 "Usage: $0 [m [n]]"
+  ;;
+esac
+
+EMPTYLINE=:  # echo
+echo 'a = { '    # mathematica
+
+let "M=1"                   # for (M=1; M<=MM; M++)
+while let "M <= MM"; do
+  let "N=1"                 # for (N=1; N<=NN; N++)
+  while let "N <= NN"; do
+
+    let "m1 = M - 1"
+    let "m2 =  M + 1"
+    let "n1 = N - 1"
+    let "n2 =  N + 1"
+
+
+    echo -n '{ '  # math
+    let "m=1"               # for(m=1; m<=MM; m++)
+    while let "m <= MM"; do
+      let "n=1"              # for(n=1; n<=NN; n++)
+      while let "n <= NN"; do
+
+        let "x = (m-m1)*(m-M)*(m-m2)"
+        let "y = (n-n1)*(n-N)*(n-n2)"
+
+        if let "(x*x + (n-N)*(n-N)) * ((m-M)*(m-M) + y*y)"; then
+	  echo -n "0,"
+        else  # neighbour
+	  echo -n "1,"
+        fi
+
+	let "n=n+1"
+      done
+      echo -n " "; let "m=m+1"     # ". "
+    done
+    echo '},'
+
+
+    let "N=N+1"
+    $EMPTYLINE  
+  done
+  $EMPTYLINE  
+  let "M=M+1"
+done
+
+echo '}'
+
+
+
+echo -n 'o = { '
+let "m=1"
+while let "m <= MM"; do
+  let "n=1"
+  while let "n <= NN"; do
+    echo -n "1,"
+    let "n=n+1"
+  done
+  let "m=m+1"
+done
+echo " }"
+
+
+echo 'x = LinearSolve[a,o]  '
+
+exit 0
+
+
diff --git a/tests/misc/perftest b/tests/misc/perftest
new file mode 100644
index 0000000..ee3f2c6
--- /dev/null
+++ b/tests/misc/perftest
@@ -0,0 +1,10 @@
+# originally from Mike Haertel
+foo() { case $1 in a*) ;; *) ;; esac ;}
+bar() { case $1 in [abc]*) ;; *);; esac ;}
+baz() { case $1 in xyzzy) ;; *) ;; esac ;}
+for x in /usr/lib/*/*
+do
+        foo $x
+        bar $x
+        baz $x
+done
diff --git a/tests/misc/read-nchars.tests b/tests/misc/read-nchars.tests
new file mode 100644
index 0000000..40b1f98
--- /dev/null
+++ b/tests/misc/read-nchars.tests
@@ -0,0 +1,11 @@
+# interactive
+
+# from tty
+read -n 3 -p 'enter three chars: ' xyz
+echo
+echo $xyz
+
+# using readline
+read -p 'enter 3 chars: ' -e -n 3 abc
+# readline outputs a newline for us, so we don't need the extra echo
+echo $abc
diff --git a/tests/misc/redir-t2.sh b/tests/misc/redir-t2.sh
new file mode 100644
index 0000000..44b2624
--- /dev/null
+++ b/tests/misc/redir-t2.sh
@@ -0,0 +1,17 @@
+read line1
+
+echo read line 1 \"$line1\"
+
+exec 4<&0
+
+exec 0</dev/tty
+
+read line2
+
+echo line read from tty = \"$line2\"
+
+exec 0<&4
+
+read line3
+
+echo read line 3 \"$line3\"
diff --git a/tests/misc/run-r2.sh b/tests/misc/run-r2.sh
new file mode 100755
index 0000000..0321a1b
--- /dev/null
+++ b/tests/misc/run-r2.sh
@@ -0,0 +1 @@
+../../bash ./redir-t2.sh < /etc/passwd
diff --git a/tests/misc/sigint-1.sh b/tests/misc/sigint-1.sh
new file mode 100755
index 0000000..7b74c30
--- /dev/null
+++ b/tests/misc/sigint-1.sh
@@ -0,0 +1,9 @@
+echo before trap
+trap 'echo caught sigint' 2
+echo after trap
+
+for i in 1 2 3
+do
+	echo $i
+	sleep 5
+done
diff --git a/tests/misc/sigint-2.sh b/tests/misc/sigint-2.sh
new file mode 100755
index 0000000..69eaf56
--- /dev/null
+++ b/tests/misc/sigint-2.sh
@@ -0,0 +1,7 @@
+echo before loop
+
+for i in 1 2 3
+do
+	echo $i
+	sleep 5
+done
diff --git a/tests/misc/sigint-3.sh b/tests/misc/sigint-3.sh
new file mode 100755
index 0000000..2627fe6
--- /dev/null
+++ b/tests/misc/sigint-3.sh
@@ -0,0 +1,11 @@
+sleep 5 &
+sleep 5 &
+sleep 5 &
+
+echo wait 1
+wait
+
+echo wait 2
+wait
+
+exit
diff --git a/tests/misc/sigint-4.sh b/tests/misc/sigint-4.sh
new file mode 100755
index 0000000..587dd26
--- /dev/null
+++ b/tests/misc/sigint-4.sh
@@ -0,0 +1,13 @@
+trap 'echo sigint' 2
+
+sleep 5 &
+sleep 5 &
+sleep 5 &
+
+echo wait 1
+wait
+
+echo wait 2
+wait
+
+exit
diff --git a/tests/misc/test-minus-e.1 b/tests/misc/test-minus-e.1
new file mode 100644
index 0000000..77cc3f2
--- /dev/null
+++ b/tests/misc/test-minus-e.1
@@ -0,0 +1,9 @@
+touch .file
+while set -e ; test -r .file ; do
+	echo -n "stop loop? "
+	read reply
+	case "$reply" in
+	y*)	rm .file non-dash-file ;;
+	esac
+	set +e
+done
diff --git a/tests/misc/test-minus-e.2 b/tests/misc/test-minus-e.2
new file mode 100644
index 0000000..f66966e
--- /dev/null
+++ b/tests/misc/test-minus-e.2
@@ -0,0 +1,11 @@
+touch .file
+set -e
+while set +e ; test -r .file ; do
+	echo -n "stop loop? [yes to quit] "
+	read reply
+	if [ "$reply" = yes ] ; then
+		rm .file non-dash-file
+	fi
+	set -e
+done
+rm -f .file
diff --git a/tests/misc/wait-bg.tests b/tests/misc/wait-bg.tests
new file mode 100644
index 0000000..95c98b0
--- /dev/null
+++ b/tests/misc/wait-bg.tests
@@ -0,0 +1,25 @@
+#! /bin/bash
+
+i=0
+while [ $i -lt  $1 ]
+do
+    /bin/sh -c "sleep 4; exit 0" &
+    rv=$?
+    pid=$!
+    eval bg_pid_$i=$pid
+    echo $$: Job $i: pid is $pid rv=$rv
+    i=$((i + 1))
+done
+
+
+
+i=0
+while [ $i -lt $1 ]
+do
+    eval wpid=\$bg_pid_$i
+    echo Waiting for job $i '('pid $wpid')'
+    wait $wpid
+    rv=$?
+    echo Return value is $rv
+    i=$((i + 1))
+done
diff --git a/tests/more-exp.right b/tests/more-exp.right
new file mode 100644
index 0000000..f5f37c9
--- /dev/null
+++ b/tests/more-exp.right
@@ -0,0 +1,214 @@
+argv[1] = <aaa bbb ccc>
+argv[1] = <aaa bbb ccc>
+argv[1] = <baz:bar>
+argv[1] = <baz:bar>
+argv[1] = <aaa bbb ccc>
+argv[1] = <bar>
+argv[1] = <bar>
+argv[1] = <bar>
+argv[1] = <abcde>
+argv[1] = <abcde>
+argv[1] = <xyz>
+argv[1] = <a b>
+argv[2] = <c>
+argv[3] = <d>
+argv[4] = <e>
+argv[5] = <f>
+argv[1] = <a b>
+argv[1] = <a>
+argv[2] = <b>
+argv[1] = <a b>
+argv[2] = <c>
+argv[3] = <d>
+argv[4] = <e>
+argv[5] = <f>
+argv[1] = <a b>
+argv[2] = <c>
+argv[3] = <d>
+argv[4] = <e>
+argv[5] = <f>
+argv[1] = </usr/homes/chet>
+argv[1] = <~>
+argv[1] = <~>
+argv[1] = <\~>
+argv[1] = <\ \~>
+argv[1] = <\ \ \~>
+argv[1] = </usr/homes/chet>
+argv[1] = </usr/homes/chet>
+argv[1] = </usr/homes/chet>
+argv[1] = <$HOME>
+argv[1] = <\ $HOME>
+argv[1] = <\ \ $HOME>
+argv[1] = <'bar'>
+argv[1] = <'bar'>
+argv[1] = <*@>
+argv[1] = <*@>
+argv[1] = <*@>
+argv[1] = <*@>
+argv[1] = <*@*>
+argv[1] = <*@*>
+argv[1] = <*@*>
+argv[1] = <*@*>
+argv[1] = <abcd>
+argv[1] = <efghijkl>
+argv[1] = <4>
+argv[2] = <2>
+argv[1] = <1>
+argv[1] = <bar>
+argv[1] = <2>
+argv[1] = <bar>
+argv[1] = <2>
+argv[1] = <4>
+argv[1] = <--\>
+argv[2] = <-->
+argv[1] = <--\^J-->
+argv[1] = <--+\>
+argv[2] = <+-->
+argv[1] = <--+\^J+-->
+argv[1] = <-+\>
+argv[2] = <+-\>
+argv[3] = <->
+argv[1] = <xy>
+argv[1] = <xy>
+argv[1] = <xy>
+argv[1] = <xy>
+argv[1] = <xy>
+argv[1] = <xy>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <xy>
+argv[1] = <xy>
+argv[1] = <xy>
+argv[1] = <xy>
+argv[1] = <xy>
+argv[1] = <xy>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <x>
+argv[1] = <x>
+argv[1] = <>
+argv[1] = <x>
+argv[1] = <x>
+argv[1] = <x>
+argv[1] = <x>
+argv[1] = <^?>
+argv[1] = <^?>
+argv[1] = <x>
+argv[1] = <x>
+argv[1] = <>
+argv[2] = <abd>
+argv[3] = <x>
+argv[1] = <>
+argv[2] = <abd>
+argv[3] = <>
+argv[1] = <a,b,c,d,e,f>
+argv[1] = <a>
+argv[2] = <b>
+argv[3] = <c>
+argv[4] = <d>
+argv[5] = <e>
+argv[6] = <f>
+./more-exp.tests: line 285: abc=def: command not found
+argv[1] = <a b c d e>
+argv[1] = <a>
+argv[2] = <b>
+argv[3] = <c>
+argv[4] = <d>
+argv[5] = <e>
+argv[1] = <foo)>
+argv[1] = <a>
+argv[1] = <\a>
+argv[1] = <\a>
+argv[1] = <\a>
+argv[1] = <\a>
+argv[1] = <\\a>
+argv[1] = <a>
+argv[1] = <\a>
+argv[1] = <\a>
+argv[1] = <\a>
+argv[1] = <\a>
+argv[1] = <\\a>
+argv[1] = <a>
+argv[1] = <a>
+argv[1] = <\a>
+argv[1] = <\a>
+argv[1] = <\a>
+argv[1] = <\a>
+argv[1] = <$a>
+argv[1] = <\foo>
+argv[1] = <$a>
+argv[1] = <\foo>
+argv[1] = <\$a>
+argv[1] = <\\$a>
+argv[1] = <a>
+argv[1] = <a>
+argv[1] = <\a>
+argv[1] = <\a>
+argv[1] = <\a>
+argv[1] = <\a>
+argv[1] = <G>
+argv[2] = <{>
+argv[3] = <I>
+argv[4] = <K>
+argv[5] = <}>
+argv[1] = <hi>
+argv[2] = <K>
+argv[3] = <}>
+argv[1] = <a*>
+Number of args: 0
+<${*-x}>: <x>
+<${@-x}>: <x>
+Number of args: 1
+<${*-x}>: <>
+<${@-x}>: <>
+Number of args: 2
+<${*-x}>: < >
+<${@-x}>: < >
+argv[1] = <5>
+argv[1] = <5>
+argv[1] = <5>
+argv[1] = <5>
+argv[1] = <5>
+argv[1] = <0>
+argv[1] = <0>
+argv[1] = <0>
+argv[1] = <0>
+argv[1] = <0>
+argv[1] = <0>
+argv[1] = <posparams>
+argv[1] = <posparams>
+argv[1] = <2>
+argv[1] = <0>
+argv[1] = <0>
+argv[1] = <1>
+argv[1] = <5>
+argv[1] = <5>
+argv[1] = <0>
+./more-exp.tests: line 436: ${#:}: bad substitution
+./more-exp.tests: line 438: ${#/}: bad substitution
+./more-exp.tests: line 440: ${#%}: bad substitution
+./more-exp.tests: line 442: ${#=}: bad substitution
+./more-exp.tests: line 444: ${#+}: bad substitution
+./more-exp.tests: line 446: ${#1xyz}: bad substitution
+./more-exp.tests: line 449: #: %: syntax error: operand expected (error token is "%")
+argv[1] = <0>
+argv[1] = <a+b>
+argv[1] = <+>
+argv[1] = <+>
+argv[1] = <+>
+argv[1] = <G { I >
+argv[2] = <K>
+argv[3] = <}>
+argv[1] = <hi>
+argv[2] = <K>
+argv[3] = <}>
+argv[1] = <xxx>
+argv[2] = <yyy>
+1
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <:a:>
+argv[1] = <:b:>
+argv[1] = <>
+argv[1] = <>
diff --git a/tests/more-exp.tests b/tests/more-exp.tests
new file mode 100644
index 0000000..df12b99
--- /dev/null
+++ b/tests/more-exp.tests
@@ -0,0 +1,517 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+expect()
+{
+	echo expect "$@"
+}
+
+tool_var() {
+        eval $1=\"\${$1:-$2}\"
+        export $1
+}
+
+A="aaa bbb ccc"
+
+unset B
+
+tool_var        B       ${B:-"$A"}
+
+expect '<aaa bbb ccc>'
+recho "$A"
+expect '<aaa bbb ccc>'
+recho "$B"
+
+eto_prepend() {
+        eval $1=\'$2\''${'$1':+":"${'$1'}}'; export $1
+}
+
+foo=bar; export foo
+eto_prepend foo baz
+expect '<baz:bar>'
+recho $foo
+expect '<baz:bar>'
+recho ${foo-"bar"}
+
+aa='aaa bbb ccc'
+
+expect '<aaa bbb ccc>'
+recho ${zzz-"$aa"}
+expect '<bar>'
+recho ${zzz:-"bar"}
+expect '<bar>'
+recho "${zzz:-bar}"
+expect '<bar>'
+recho "${zzz:-"bar"}"
+
+var=abcde
+expect '<abcde>'
+recho "${var:-xyz}"
+expect '<abcde>'
+recho "${var:=xyz}"
+expect '<xyz>'
+recho "${var:+xyz}"
+
+set 'a b' c d e f
+expect '<a b> <c> <d> <e> <f>'
+recho ${1+"$@"}
+expect '<a b>'
+recho "${1-"$@"}"
+expect '<a> <b>'
+recho ${1-"$@"}
+expect '<a b> <c> <d> <e> <f>'
+recho "${1+$@}"
+expect '<a b> <c> <d> <e> <f>'
+recho "${1+"$@"}"
+
+HOME=/usr/homes/chet
+somevar=
+expect "<$HOME>"
+recho ${somevar:-~}
+# This changed after bash-3.0, when the tilde implementation was redone.  It's
+# not backward compatible, but it's very hard to be backward-compatible here,
+# and I think the old behavior was a bug
+expect '<~>'
+recho "${somevar:-~}"
+expect '<~>'
+recho "${somevar:-"~"}"
+expect '<\~>'
+recho "${somevar:-\~}"
+expect '<\ \~>'
+recho "${somevar:-\ \~}"
+expect '<\ \ \~>'
+recho "${somevar:-\ \ \~}"
+
+expect "<$HOME>"
+recho ${somevar:-$HOME}
+expect "<$HOME>"
+recho "${somevar:-$HOME}"
+expect "<$HOME>"
+recho "${somevar:-"$HOME"}"
+expect '<$HOME>'
+recho "${somevar:-\$HOME}"
+expect '<\ $HOME>'
+recho "${somevar:-\ \$HOME}"
+expect '<\ \ $HOME>'
+recho "${somevar:-\ \ \$HOME}"
+
+foo=bar
+expect "<'bar'>"
+recho "${foo+'$foo'}"
+expect "<'bar'>"
+recho "${fox='$foo'}"
+
+P='*@*'
+expect '<*@>'
+recho "${P%"*"}"
+expect '<*@>'
+recho "${P%'*'}"
+
+expect '<*@>'
+recho ${P%"*"}
+expect '<*@>'
+recho ${P%'*'}
+
+expect '<*@*>'
+recho ${P%""}
+expect '<*@*>'
+recho ${P#""}
+
+expect '<*@*>'
+recho ${P#"$foobar"}
+expect '<*@*>'
+recho ${P%"$foobar"}
+
+s1=abcdefghijkl
+s2=efgh
+
+first=${s1/$s2*/}
+expect '<abcd>'
+recho $first
+
+last=${s1##$first}
+expect '<efghijkl>'
+recho $last
+
+shift $#
+UNAME_RELEASE=${1:-4.2MP}
+
+RELEASE=`expr "$UNAME_RELEASE" : '[^0-9]*\([0-9]*\)'` # 4
+case "$RELEASE" in
+"")     RELEASE=0 ;;
+*)      RELEASE=`expr "$RELEASE" + 0` ;;
+esac            
+REL_LEVEL=`expr "$UNAME_RELEASE" : '[^0-9]*[0-9]*.\([0-9]*\)'`    # 1
+REL_SUBLEVEL=`expr "$UNAME_RELEASE" : '[^0-9]*[0-9]*.[0-9]*.\([0-9]*\)'` # 2
+
+expect '<4> <2>'
+recho $RELEASE $REL_LEVEL $REL_SUBLEVEL
+
+b1()
+{
+	b2 ${1+"$@"}
+}
+
+b2()
+{	
+	recho $*
+	recho ${#}
+}
+
+expect '<1>'
+b1 ''
+
+expect '<bar> <2>'
+b1 bar ''
+
+expect '<bar> <2>'
+b1 '' bar
+
+expect '<4>'
+b1 '' '' '' ''
+
+NL="\\
+"
+
+NNL="+$NL+"
+
+expect '<--\> <-->'
+recho --$NL--
+expect '<--\^J-->'
+recho "--$NL--"
+
+expect '<--+\> <+-->'
+recho --$NNL--
+expect '<--+\^J+-->'
+recho "--$NNL--"
+
+expect '<-+\> <+-\> <->'
+recho -$NNL-$NL-
+
+set ''
+expect '<xy>'
+recho "$*xy"
+expect '<xy>'
+recho "x$*y"
+expect '<xy>'
+recho "xy$*"
+expect '<xy>'
+recho x"$*"y
+expect '<xy>'
+recho xy"$*"
+expect '<xy>'
+recho "$*"xy
+expect '<>'
+recho "$*"
+expect nothing
+recho $*
+
+unset undef ; set ""
+
+expect '<>'
+recho ${undef-"$*"}
+expect '<xy>'
+recho ${undef-"x$*y"}
+expect '<xy>'
+recho ${undef-"$*xy"}
+expect '<xy>'
+recho ${undef-"xy$*"}
+expect '<xy>'
+recho ${undef-x"$*"y}
+expect '<xy>'
+recho ${undef-xy"$*"}
+expect '<xy>'
+recho ${undef-"$*"xy}
+expect '<>'
+recho "${undef-$*}"
+expect nothing
+recho ${undef-$*}
+
+expect '<>'
+recho ${undef-"$zzz"}
+expect '<x>'
+recho x${undef-"$zzz"}
+expect '<x>'
+recho x${undef-"$@"}
+expect nothing
+recho ${undef-"$@"}
+expect '<x>'
+recho ${undef-"$zzz"}x
+expect '<x>'
+recho ${undef-"$@"}x
+expect '<x>'
+recho "$@"x
+expect '<x>'
+recho "$zzz"x
+expect '<^?>'
+recho ${undef-}
+expect '<^?>'
+recho ${undef-""}
+
+yyy=""
+recho "$xxx"x
+recho "$yyy"x
+
+set "" "abd" ""
+recho "$@"x
+recho "$@"$xxx
+
+OIFS="$IFS"
+
+arg=a,b,c,d,e,f
+
+IFS=,
+
+export z=$arg
+
+eval z1=\"$arg\"
+
+IFS="$OIFS"
+
+recho $z
+recho $z1
+
+# should give an error
+abc\=def
+
+zz="a b c d e"
+declare a=$zz
+
+recho "$a"
+recho $a
+
+recho $(echo "foo$(echo ")")")
+
+# test backslash escapes
+
+recho \a
+recho \\a
+
+recho "\a"
+recho "\\a"
+
+recho '\a'
+recho '\\a'
+
+recho $(zecho \a)
+recho $(zecho \\a)
+
+recho $(zecho "\a")
+recho $(zecho "\\a")
+
+recho $(zecho '\a')
+recho $(zecho '\\a')
+
+recho `zecho \a`
+recho `zecho \\a`
+
+recho `zecho "\a"`
+recho `zecho "\\a"`
+
+recho `zecho '\a'`
+recho `zecho '\\a'`
+
+a=foo
+
+recho \$a
+recho \\$a
+
+recho "\$a"
+recho "\\$a"
+
+recho '\$a'
+recho '\\$a'
+
+recho $(zecho `zecho \a`)
+recho $(zecho `zecho \\a`)
+
+recho $(zecho `zecho "\a"`)
+recho $(zecho `zecho "\\a"`)
+
+recho $(zecho `zecho '\a'`)
+recho $(zecho `zecho '\\a'`)
+
+# should echo G { I K }
+recho ${abc:-G { I } K }
+
+abc=hi
+
+# should echo hi K }
+recho ${abc:-G { I } K }
+
+# should echo a*
+unset foo
+recho "${foo:-"a"}*"
+
+f ()
+{
+	echo "Number of args: $#"
+	echo "<\${*-x}>: <${*-x}>"
+	echo "<\${@-x}>: <${@-x}>"
+}
+
+f
+f ''
+f '' ''
+
+set 1 2 3 4 5
+
+expect '<5>'
+recho ${#}
+expect '<5>'
+recho ${#:foo}
+expect '<5>'
+recho ${#:-foo}
+expect '<5>'
+recho ${#-posparams}
+expect '<5>'
+recho ${#:-posparams}
+
+expect '<0>'
+recho ${#!}
+
+expect nothing
+recho $!
+expect nothing
+recho ${!}
+
+expect nothing
+recho $8
+expect nothing
+recho ${8}
+
+shift $#
+
+expect '<0>'
+recho ${#}
+expect '<0>'
+recho ${#:foo}
+expect '<0>'
+recho ${#:-foo}
+expect '<0>'
+recho ${#-posparams}
+expect '<0>'
+recho ${#:-posparams}
+
+expect '<posparams>'
+recho ${!-posparams}
+expect '<posparams>'
+recho ${!:-posparams}
+
+expect '<2>'
+recho ${#-}
+
+expect '<0>'
+recho ${#-posparams}
+
+expect '<0>'
+recho ${#?:-xyz}
+
+expect '<1>'
+recho ${#?}
+
+set a b c d e
+
+expect '<5>'
+recho ${#}
+expect '<5>'
+recho ${#?:-xyz}
+
+shift ${#}
+
+expect '<0>'
+recho ${#:-foo}
+
+expect a bad substitution error
+recho ${#:}
+expect a bad substitution error
+recho ${#/}
+expect a bad substitution error
+recho ${#%}
+expect a bad substitution error
+recho ${#=}
+expect a bad substitution error
+recho ${#+}
+expect a bad substitution error
+recho ${#1xyz}
+
+expect a math syntax error
+recho ${#:%}
+
+expect '<0>'
+recho ${#:-}
+
+set --
+unset a b
+
+x=a
+y=b
+
+IFS=+
+
+expect '<a+b>'
+recho $x+$y
+expect '<+>'
+recho $a+$b
+
+expect '<+>'
+recho + "$@"
+expect '<+>'
+recho +"$@"
+
+# variants of nested curly braces inside ${...} expressions
+
+# IFS is not the standard one
+
+expect '<G { I>' '<K>' '<}>'
+recho ${gik:-G { I } K }
+
+abc=hi
+
+expect '<hi>' '<K>' '<}>'
+recho ${abc:-G { I } K }
+
+# reset IFS to the default
+IFS=' 	
+'
+
+# nested ${...} inside ${...} are handled specially
+unset XXX FOO BAR
+expect '<xxx>' '<yyy>'
+XXX=xxx
+FOO=${BAR:-${XXX} yyy}
+recho $FOO
+
+# this was a bug in versions of bash prior to bash-2.04-release
+set -- ''
+expect 1
+echo $#
+expect '<>'
+recho "${@}"
+expect '<>'
+recho "${@-}"
+expect '<>'
+recho "${@:-}"
+
+# this was a bug in bash-2.04, fixed in 2.05
+set -- a b
+expect '<:a:>' '<:b:>'
+for i in "${@-}"; do recho :$i:; done
+
+# I believe that ksh93 does these wrong -- we're using the rhs, so shouldn't
+# it behave the same as ""?
+set --
+expect '<>'
+recho "${@-}"
+expect '<>'
+recho "${@:-}"
diff --git a/tests/nameref.right b/tests/nameref.right
new file mode 100644
index 0000000..296105c
--- /dev/null
+++ b/tests/nameref.right
@@ -0,0 +1,485 @@
+one
+two
+three
+declare -n fee="flip"
+declare -n foo="bar"
+turning off nameref attribute on foo
+bar
+after +n foo bar = other
+one
+two
+one
+expect <one>
+argv[1] = <one>
+expect <two>
+argv[1] = <two>
+expect <one>
+one
+expect <one>
+one
+expect <one>
+argv[1] = <one>
+changevar: expect <two>
+argv[1] = <two>
+expect <two>
+argv[1] = <two>
+changevar: expect <three four five>
+argv[1] = <three four five>
+expect <three four five>
+argv[1] = <three four five>
+./nameref.tests: line 106: foo: readonly variable
+./nameref.tests: line 107: foo: readonly variable
+one
+one
+./nameref.tests: line 119: foo: readonly variable
+./nameref.tests: line 116: foo: readonly variable
+one
+abxde
+abxde
+one
+bar
+
+./nameref2.sub: line 5: foo: readonly variable
+
+expect <unset>
+argv[1] = <unset>
+expect <unset>
+argv[1] = <unset>
+expect <bar>
+argv[1] = <bar>
+expect <unset>
+./nameref3.sub: line 29: foo: invalid indirect expansion
+./nameref3.sub: line 34: unset: bar: cannot unset: readonly variable
+expect <two>
+two
+expect <two>
+two
+three
+unset
+four
+0
+expect <a b>
+a b
+expect <foo>
+foo
+1 3 5 7 9
+9
+1 3 42 7 9
+1 3 42 7 9
+9
+1 3 44 7 9
+unset
+expect <a b c d e>
+argv[1] = <a b c d e>
+expect <zero> <one> <seven> <three> <four>
+argv[1] = <zero>
+argv[2] = <one>
+argv[3] = <seven>
+argv[4] = <three>
+argv[5] = <four>
+16
+expect <4>
+4
+expect <4>
+4
+expect <4>
+4
+expect <one>
+one
+expect <one>
+one
+expect <one>
+one
+expect <four>
+four
+errors = 0
+1
+2
+v1: 1
+v2: 2
+ref -> first, value: I am first
+ref -> second, value: I am in the middle
+ref -> third, value: I am last
+final state: ref -> third, value: I am last
+ref -> one, value: 1
+ref -> two, value: 2
+ref -> three, value: 3
+final state: ref -> three, value: 3
+./nameref5.sub: line 56: unset: three: cannot unset: readonly variable
+ref -> one, value: 1
+ref -> two, value: 2
+ref -> three, value: 3
+final state: ref -> three, value: 3
+./nameref6.sub: line 15: typeset: x: nameref variable self references not allowed
+./nameref6.sub: line 18: typeset: x[3]: reference variable cannot be an array
+./nameref6.sub: line 25: typeset: x: reference variable cannot be an array
+the -- 1
+42 -- 0
+y -- 0
+2 -- 0
+2 -- 0
+y -- 0
+bar
+unset
+./nameref8.sub: line 16: typeset: warning: v: circular name reference
+./nameref8.sub: line 16: warning: v: circular name reference
+./nameref8.sub: line 18: warning: v: circular name reference
+inside
+inside: two
+outside:
+./nameref8.sub: line 42: typeset: warning: x: circular name reference
+./nameref8.sub: line 42: warning: x: circular name reference
+./nameref8.sub: line 44: warning: x: circular name reference
+foo
+./nameref8.sub: line 51: typeset: warning: v: circular name reference
+./nameref8.sub: line 51: warning: v: circular name reference
+./nameref8.sub: line 51: warning: v: circular name reference
+local
+./nameref8.sub: line 60: typeset: v: nameref variable self references not allowed
+./nameref8.sub: line 67: warning: x: circular name reference
+./nameref8.sub: line 68: warning: x: circular name reference
+x =
+idx2
+idX2
+idx2
+idX2
+declare -n foo="x[\$zero]"
+42
+declare -a x=([0]="4")
+declare -n foo="x[\$(echo 0)]"
+4
+comsub
+x[i=0]
+comsub
+4
+comsub
+4
+comsub
+4
+declare -n foo="somevariable"
+./nameref10.sub: line 51: typeset: somevariable: not found
+foo =
+declare -n foo="somevariable"
+declare -A somevariable=([jug]="brown" )
+declare -n foo="somevariable"
+declare -A somevariable=([jug]="brown" )
+declare -n foo="somevariable"
+./nameref10.sub: line 62: typeset: somevariable: not found
+./nameref10.sub: line 64: typeset: foo: not found
+./nameref10.sub: line 64: typeset: somevariable: not found
+declare -n foo="bar"
+./nameref10.sub: line 68: typeset: bar: not found
+declare -n foo="bar"
+./nameref10.sub: line 70: typeset: bar: not found
+declare -n foo="bar"
+declare -i bar="8"
+8
+declare -n foo="bar"
+./nameref10.sub: line 77: typeset: bar: not found
+./nameref11.sub: line 14: declare: `/': invalid variable name for name reference
+./nameref11.sub: line 15: declare: `/': invalid variable name for name reference
+./nameref11.sub: line 16: `/': not a valid identifier
+./nameref11.sub: line 17: declare: `/': not a valid identifier
+./nameref11.sub: line 18: `/': not a valid identifier
+1) /
+#? ./nameref11.sub: line 19: `/': not a valid identifier
+x
+
+./nameref11.sub: line 20: ((: `0': not a valid identifier
+./nameref11.sub: line 21: declare: `0': invalid variable name for name reference
+./nameref11.sub: line 22: declare: `/': invalid variable name for name reference
+./nameref11.sub: line 23: declare: `/': invalid variable name for name reference
+/
+./nameref11.sub: line 25: `/': not a valid identifier
+./nameref11.sub: line 26: exec: `10': not a valid identifier
+./nameref11.sub: line 26: r: cannot assign fd to variable
+./nameref11.sub: line 27: warning: r: removing nameref attribute
+63
+./nameref11.sub: line 28: declare: RO: readonly variable
+./nameref11.sub: line 28: RO: readonly variable
+./nameref11.sub: line 29: declare: `/': invalid variable name for name reference
+/
+./nameref11.sub: line 30: declare: `/': invalid variable name for name reference
+./nameref11.sub: illegal option -- h
+./nameref11.sub: line 31: getopts: `?': not a valid identifier
+./nameref11.sub: line 32: warning: r: removing nameref attribute
+declare -a r=()
+./nameref11.sub: line 33: declare: r: reference variable cannot be an array
+./nameref11.sub: line 34: printf: `/': not a valid identifier
+./nameref11.sub: line 36: `': not a valid identifier
+./nameref11.sub: line 37: declare: `': not a valid identifier
+./nameref11.sub: line 38: `': not a valid identifier
+./nameref11.sub: line 39: printf: `': not a valid identifier
+./nameref11.sub: line 40: declare: `': invalid variable name for name reference
+declare -r ROVAR="42"
+./nameref11.sub: line 45: ROVAR: readonly variable
+./nameref11.sub: line 45: ROVAR: cannot unset: readonly variable
+declare -r ROVAR="42"
+./nameref11.sub
+./nameref11.sub: line 47: `@': not a valid identifier
+./nameref11.sub
+declare -n ref="x"
+./nameref11.sub: line 52: RO: readonly variable
+declare -r RO_PID
+./nameref11.sub: line 52: RO: cannot unset: readonly variable
+declare -r RO="x"
+./nameref11.sub: line 52: declare: RO_PID: not found
+./nameref11.sub: line 54: RO2: readonly variable
+declare -r RO2="a"
+2
+./nameref11.sub: line 65: typeset: `2': invalid variable name for name reference
+2
+./nameref11.sub: line 70: typeset: `2': invalid variable name for name reference
+2
+./nameref11.sub: line 75: foo[2]: invalid indirect expansion
+./nameref11.sub: line 76: bar: invalid indirect expansion
+./nameref12.sub: line 19: declare: `/': invalid variable name for name reference
+./nameref12.sub: line 22: declare: `%': invalid variable name for name reference
+./nameref12.sub: line 26: `^': not a valid identifier
+declare -n r
+declare -a foo
+declare -a foo=([0]="7")
+./nameref12.sub: line 39: declare: `42': not a valid identifier
+./nameref12.sub: line 40: declare: x: not found
+declare -nr RO="foo"
+/
+./nameref12.sub: line 58: declare: `7*6': not a valid identifier
+./nameref12.sub: line 58: declare: foo: not found
+./nameref12.sub: line 60: `7*6': not a valid identifier
+declare -n ref="var"
+declare -n ref="var"
+./nameref12.sub: line 87: readonly: `var[0]': not a valid identifier
+declare -- var="foo"
+declare -r var2="foo"
+declare -n ref="var"
+declare -a var=([0]="foo")
+./nameref12.sub: line 104: `': not a valid identifier
+declare -n ref
+declare -- ref="global"
+declare -a var=([0]="foo2")
+./nameref12.sub: line 113: declare: global: not found
+declare -- a
+declare -n r="a"
+declare -- a
+declare -n r="a"
+0
+declare -n r="P"
+declare -n ref="var"
+declare -- a
+declare -n r="a"
+0
+declare -n r
+declare -n r
+./nameref13.sub: line 101: typeset: `12345': invalid variable name for name reference
+declare -n foo
+./nameref13.sub: line 110: typeset: `12345': invalid variable name for name reference
+declare -n foo
+declare -nx ref="var"
+var
+var
+var
+var
+foo
+foo
+foo
+foo
+before
+declare -n ref="var"
+./nameref14.sub: line 36: typeset: var: not found
+first
+declare -n ref="var"
+declare -x var="xxx"
+invalid
+declare -n ref="var"
+declare -x var="5"
+after
+declare -n ref="var"
+./nameref14.sub: line 45: typeset: var: not found
+declare -n ref="var"
+./nameref15.sub: line 14: local: warning: a: circular name reference
+./nameref15.sub: line 14: warning: a: circular name reference
+./nameref15.sub: line 14: `a[0]': not a valid identifier
+declare -a a=([0]="0")
+./nameref15.sub: line 14: local: warning: a: circular name reference
+./nameref15.sub: line 14: warning: a: circular name reference
+./nameref15.sub: line 14: warning: a: circular name reference
+declare -a a=([0]="X")
+declare -a b=([0]="X")
+./nameref15.sub: line 14: local: warning: a: circular name reference
+./nameref15.sub: line 14: warning: a: circular name reference
+./nameref15.sub: line 14: `a[0]': not a valid identifier
+declare -a b=([0]="0")
+./nameref15.sub: line 32: typeset: warning: ref: circular name reference
+./nameref15.sub: line 32: warning: ref: circular name reference
+./nameref15.sub: line 33: warning: ref: circular name reference
+./nameref15.sub: line 34: warning: ref: circular name reference
+inside X
+outside X
+before: 7
+./nameref15.sub: line 45: typeset: warning: xxx: circular name reference
+./nameref15.sub: line 45: warning: xxx: circular name reference
+./nameref15.sub: line 46: warning: xxx: circular name reference
+declare -n xxx="xxx"
+./nameref15.sub: line 48: warning: xxx: circular name reference
+xxx_func: inside: xxx = foo
+after: foo
+./nameref15.sub: line 59: typeset: ref: nameref variable self references not allowed
+./nameref15.sub: line 61: ref: nameref variable self references not allowed
+declare -n ref="re"
+declare -n ref="re"
+declare -- re="4"
+4
+declare -n foo="var[@]"
+declare -n ref="var[@]"
+./nameref15.sub: line 78: var[@]: bad array subscript
+declare -n bar="var[@]"
+./nameref15.sub: line 83: var[@]: bad array subscript
+declare -n a="b"
+declare -n b="a[1]"
+./nameref15.sub: line 91: warning: a: removing nameref attribute
+declare -a a=([1]="foo")
+declare -n b="a[1]"
+./nameref15.sub: line 96: warning: a: removing nameref attribute
+declare -a a=([1]="foo")
+declare -n b="a[1]"
+declare -n n="v"
+declare -a v=([1]="1")
+./nameref15.sub: line 112: typeset: n: not found
+declare -a v=([0]="0" [1]="1")
+declare -n n="v[1]"
+declare -a v=([0]="0")
+declare -n r1="y"
+declare -n r2="x"
+./nameref16.sub: line 25: typeset: x: not found
+./nameref16.sub: line 25: typeset: y: not found
+declare -n r1="y"
+declare -n r2="x"
+./nameref16.sub: line 34: typeset: x: not found
+./nameref16.sub: line 34: typeset: y: not found
+declare -n r1="y"
+declare -n r2="x"
+./nameref16.sub: line 46: typeset: x: not found
+./nameref16.sub: line 46: typeset: y: not found
+declare -n r1="y"
+declare -n r2="x"
+declare -- x="one"
+declare -- y="two"
+./nameref17.sub: line 21: declare: bar: not found
+./nameref17.sub: line 22: unset: foo0: cannot unset: readonly variable
+declare -nr foo0="bar"
+declare -nr foo0="bar"
+declare -- bar
+./nameref17.sub: line 27: declare: foo0: readonly variable
+./nameref17.sub: line 28: declare: foo0: readonly variable
+declare -nr foo1
+./nameref17.sub: line 37: typeset: foo1: readonly variable
+declare -nr foo1
+declare -n foo2="bar"
+declare -r bar
+./nameref17.sub: line 48: bar: readonly variable
+./nameref17.sub: line 49: typeset: bar: readonly variable
+declare -n foo2="bar"
+declare -r bar
+declare -- bar3="three"
+./nameref17.sub: line 59: unset: foo3: cannot unset: readonly variable
+./nameref17.sub: line 62: declare: bar3: readonly variable
+declare -nr foo3="bar3"
+declare -r bar3="three"
+./nameref17.sub: line 64: declare: foo3: readonly variable
+declare -nr foo4="bar4"
+declare -- bar4="four"
+./nameref17.sub: line 76: typeset: foo4: readonly variable
+declare -nr foo4="bar4"
+declare -nr foo4="bar4"
+declare -- bar4="four"
+./nameref17.sub: line 92: typeset: foo4: readonly variable
+declare -nr foo4="bar4"
+declare -nr foo4="bar4"
+declare -- bar4="four"
+declare -nr foo5
+declare -r foo5
+declare -nr foo5
+declare -r foo5
+./nameref18.sub: line 15: mapfile: `XXX[0]': not a valid identifier
+./nameref18.sub: line 16: declare: XXX[0]: not found
+./nameref18.sub: line 22: `XXX[0]': not a valid identifier
+./nameref18.sub: line 23: declare: XXX[0]: not found
+declare -n ref="XXX[0]"
+declare -a XXX=([0]="4")
+./nameref18.sub: line 37: `XXX[0]': not a valid identifier
+declare -n ref="XXX[0]"
+./nameref18.sub: line 38: declare: XXX[0]: not found
+./nameref18.sub: line 42: read: `XXX[0]': not a valid identifier
+./nameref18.sub: line 43: declare: XXX[0]: not found
+./nameref18.sub: line 48: `XXX[0]': not a valid identifier
+declare -n ref="XXX[0]"
+./nameref18.sub: line 51: `XXX[0]': not a valid identifier
+./nameref18.sub: line 51: declare: XXX[0]: not found
+declare -n ref="var[123]"
+./nameref18.sub: line 59: declare: var[123]: not found
+declare -a var=([123]="")
+declare -n ref="var[123]"
+./nameref18.sub: line 63: declare: var[123]: not found
+declare -a var=([123]="")
+declare -n ref="var[123]"
+./nameref18.sub: line 67: declare: var[123]: not found
+declare -a var=([123]="X")
+declare -n foo="bar"
+declare -- foo="bar"
+./nameref19.sub: line 22: declare: bar: not found
+declare -n foo="bar"
+declare -- foo="bar"
+declare -i bar="11"
+declare -inx foo6
+declare -ix foo6
+declare -n foo="bar"
+declare -- bar="Hello World!"
+declare -- foo="bar"
+declare -- bar="Hello World!"
+declare -n foo="bar"
+declare -- bar
+declare -- foo="bar"
+declare -- bar
+declare -a v=([0]="Y")
+r: <Y>
+v: <Y>
+declare -n ref="var"
+declare -a var=([0]="X")
+declare -n ref="var"
+declare -a var=([0]="X")
+declare -n ref="var"
+./nameref20.sub: line 36: declare: var: not found
+outside:
+declare -a foo=([0]="X")
+declare -n ref="var"
+declare -a var=([0]="X")
+outside:
+./nameref20.sub: line 51: declare: ref: not found
+./nameref20.sub: line 51: declare: var: not found
+declare -n ref="var"
+declare -- var="X"
+outside:
+./nameref20.sub: line 58: declare: ref: not found
+./nameref20.sub: line 58: declare: var: not found
+declare -n ref="var"
+declare -a var=([0]="Y")
+declare -- ref="Y"
+declare -- var="X"
+declare -- ref="Y"
+declare -- ref="Y"
+./nameref20.sub: line 74: declare: var: not found
+declare -- ref="Y"
+declare -n ref="var"
+declare -A var=([2]="" )
+declare -n ref="var"
+declare -A var=([2]="" )
+declare -n ref="var"
+declare -a var=([2]="")
+declare -n ref="var"
+declare -a var=([2]="")
+declare -n ref="var"
+declare -ai var=([1]="0")
+declare -n ref="var"
+declare -ai var=([1]="0")
+declare -n ref="var"
+declare -- var="1"
diff --git a/tests/nameref.tests b/tests/nameref.tests
new file mode 100644
index 0000000..3a6c5d9
--- /dev/null
+++ b/tests/nameref.tests
@@ -0,0 +1,133 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# basic nameref tests
+bar=one
+flow=two
+flip=three
+
+foo=bar
+typeset -n foo
+
+typeset -n fee=flow
+
+echo ${foo}
+echo ${fee}
+
+typeset -n fee=flip
+echo ${fee}
+
+typeset -n
+
+echo turning off nameref attribute on foo
+typeset +n foo=other
+echo ${foo}
+echo after +n foo bar = $bar
+
+unset foo bar fee
+
+bar=one
+
+foo=bar
+typeset -n foo
+
+foo=two printf "%s\n" $foo
+foo=two eval 'printf "%s\n" $foo'
+
+foo=two echo $foo
+
+unset foo bar
+# other basic assignment tests
+bar=one
+
+echo "expect <one>"
+recho ${bar}
+typeset -n foo=bar
+foo=two
+
+echo "expect <two>"
+recho ${bar}
+
+# this appears to be a ksh93 bug; it doesn't unset foo here and messes up
+# later
+unset foo bar
+
+# initial tests of working inside shell functions
+echoval()
+{
+	typeset -n ref=$1
+	printf "%s\n" $ref
+}
+
+foo=bar
+bar=one
+echo "expect <$foo>"
+echoval foo
+echo "expect <$bar>"
+echoval bar
+
+unset foo bar
+changevar()
+{
+	typeset -n v=$1
+
+	shift
+	v="$@"
+	echo "changevar: expect <$@>"
+	recho "$v"
+}
+
+bar=one
+
+echo "expect <one>"
+recho ${bar}
+changevar bar two
+echo "expect <two>"
+recho $bar
+
+changevar bar three four five
+echo "expect <three four five>"
+recho "$bar"
+
+unset foo bar
+unset -n foo bar
+readonly foo=one
+typeset -n bar=foo
+bar=4
+foo=4
+
+echo $foo
+echo $bar
+
+assignvar()
+{
+	typeset -n ref=$1
+	shift
+	ref="$@"
+}
+
+readonly foo=one
+
+assignvar foo two three four
+echo $foo
+
+var=abcde
+x=var
+declare -n v=var
+# these two should display the same
+echo ${!x//c/x}
+echo ${v//c/x}
+
+for testfile in ./nameref[0-9].sub ./nameref[1-9][0-9].sub ; do
+	${THIS_SH} "$testfile"
+done
diff --git a/tests/nameref1.sub b/tests/nameref1.sub
new file mode 100644
index 0000000..50bb25d
--- /dev/null
+++ b/tests/nameref1.sub
@@ -0,0 +1,13 @@
+# indirect referencing of a nameref returns the variable name it references
+unset foo bar
+
+bar=one
+foo=bar
+
+typeset -n foo
+
+echo ${foo}
+echo ${!foo}
+
+# this is a current incompatibility
+echo ${!foo[0]}
diff --git a/tests/nameref10.sub b/tests/nameref10.sub
new file mode 100644
index 0000000..742755b
--- /dev/null
+++ b/tests/nameref10.sub
@@ -0,0 +1,77 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# testing behavior of command substitution as one of expansions performed by
+# array subscripting; should behave the same directly as when done through
+# a nameref
+
+x[0]=42
+zero=0
+f() { typeset -n foo="$1"; declare -p foo; echo "$foo"; }
+
+f 'x[$zero]'
+
+x[$(echo 0)]=4
+declare -p x
+
+f 'x[$(echo 0)]'
+
+unset -f f
+f()
+{
+	typeset -n foo="$1";
+
+	echo "x[i=0$(echo comsub >&2)]"
+	echo "${x[i=0$(echo comsub >&2)]}"
+	echo "${!1}"
+	echo "$foo"
+}
+
+f 'x[i=0$(echo comsub >&2)]'
+
+unset -f f
+unset x
+
+# problems with unset and namerefs pointing to non-existent variables pointed
+# out after bash-4.3 released
+
+typeset -n foo=somevariable
+foo=bar
+unset foo		# unsets somevariable
+typeset -p foo somevariable
+echo foo = $foo
+
+typeset -A foo		# should create array variable named somevariable
+foo["jug"]="brown"
+
+typeset -p foo somevariable
+typeset -A foo='([jug]="brown" )'
+typeset -p foo somevariable
+
+unset foo
+typeset -p foo somevariable
+unset -n foo
+typeset -p foo somevariable
+
+unset bar
+typeset -n foo=bar
+typeset -p foo bar
+unset foo
+typeset -p foo bar
+typeset -i foo
+foo=4+4
+typeset -p foo bar
+echo "$foo"
+
+unset foo
+typeset -p foo bar
diff --git a/tests/nameref11.sub b/tests/nameref11.sub
new file mode 100644
index 0000000..ea14c0d
--- /dev/null
+++ b/tests/nameref11.sub
@@ -0,0 +1,76 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+r=/; declare -n r ; unset r
+declare -n r=/ ; unset -n r
+declare -n r; r=/ ; unset -n r
+declare -n r; declare r=/ ; unset -n r
+declare -n r; for r in /; do :; done ; unset -n r
+declare -n r; select r in /; do :; done <<< 1; echo x; echo $r ; unset -n r
+declare -n r; ((r=0)) ; unset -n r
+((r=0)); declare -n r ; unset -n r
+r=/ declare -n r ; unset -n r
+f() { declare -n r; }; r=/ f ; unset r
+f() { echo $r; }; declare -n r; r=/ f ; unset -n r
+declare -n r; : ${r:=/} ; unset -n r
+declare -n r; exec {r}>/dev/null ; unset -n r
+declare -n r; coproc r { :; }; echo $r ; unset r ; wait
+declare -r RO=x; r=$RO; declare -n r; x=y; declare -n RO; RO=z; declare -p RO; echo "$RO"
+s=/; declare -n r=s; declare -n s; echo $r ; unset -n r ; unset -n s
+declare -n r=s; declare -n s; s=/ ; unset -n r; unset -n s
+declare -n r; getopts x r -h ; unset r; unset -n r
+declare -n r; mapfile r < /dev/null ; declare -p r; unset r ; unset -n r
+mapfile r < /dev/null; declare -n r ; unset r ; unset -n r
+declare -n r; printf -v r / ; unset -n r
+
+declare -n r; r="" ; unset -n r
+declare -n r="" ; unset -n r
+declare -n r; : ${r=} ; unset -n r
+declare -n r; printf -v r '' ; unset -n r
+r=""; declare -n r ; unset -n r
+export r
+
+# coproc tests, since coproc sets and unsets variables
+declare -r ROVAR=42
+declare -p ROVAR; coproc ROVAR { :; }; wait; declare -p ROVAR
+
+echo ${@:0}; coproc @ { :; }; wait ; echo ${@:0}
+
+declare -n ref=x; coproc ref { :; }; wait ; declare -p ref
+unset -n ref ; unset ref
+
+declare -r RO RO_PID; coproc RO { :; }; declare -p RO_PID; wait; declare -p RO RO_PID
+
+declare -r RO2=a; declare -n ref_PID=RO2; coproc ref { :; }; wait; declare -p RO2
+
+unset x y
+set -- one two three
+
+y=2
+typeset -n x=y
+echo ${x}
+
+unset -n x
+
+typeset -n y
+echo $y
+
+unset -n y
+
+typeset -n y
+y=2
+echo ${y}
+
+declare -n foo=bar
+echo ${!foo[2]}
+echo ${!bar}
diff --git a/tests/nameref12.sub b/tests/nameref12.sub
new file mode 100644
index 0000000..199b51c
--- /dev/null
+++ b/tests/nameref12.sub
@@ -0,0 +1,113 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+declare -n r
+declare -n r
+unset -n r
+
+r=foo
+declare -n r=/
+
+r=%
+declare -n r
+unset r
+
+declare -n r
+r=^
+declare -p r
+
+unset -n r
+
+declare -n foo
+declare -a foo
+declare -p foo
+foo[0]=7
+declare -p foo
+unset foo
+
+declare -n x
+declare x=42
+declare -p x
+
+declare -n -r RO=foo
+declare -p RO
+
+unset -n r; unset r
+
+# the details of this may change; currently we put namerefs and values into
+# the tempenv if the nameref value is an invalid variable name
+f() { echo $r; }
+
+declare -n r
+r=/ ${THIS_SH} < /dev/null
+r=/ f
+
+unset -f f
+
+# the details of this may change; this will tell me when they do
+declare -n foo ; declare -i foo=7*6 ; declare -p foo
+unset -n foo
+declare -n foo ; declare -i foo ; foo=7*6 ; declare -p foo
+
+# used to be buggy
+f()
+{
+	unset var
+	declare -n ref=var
+	declare -n ref
+	declare -p ref
+}
+f
+
+unset -f f
+f()
+{
+	local var
+	declare -n ref=var
+	declare -n ref
+	declare -p ref
+}
+f
+
+unset ref; unset -n ref
+unset var
+
+var=foo
+typeset -n ref=var[0]
+readonly ref
+typeset -p var
+
+var2=foo
+typeset -n ref2=var2
+readonly ref2
+typeset -p var2
+
+unset var
+unset -n ref ref2
+
+unset var; typeset -n ref=var
+ref[0]=foo
+typeset -p ref var
+unset -n ref
+
+unset var; typeset -n ref
+ref[0]=foo
+typeset -p ref
+unset -n ref
+
+ref=global
+f() { declare -n ref=var; ref[0]=foo1; }; f
+f() { declare -n ref=var; ref[0]=foo2; }; f
+declare -p ref var
+
+declare -p global
diff --git a/tests/nameref13.sub b/tests/nameref13.sub
new file mode 100644
index 0000000..5c56428
--- /dev/null
+++ b/tests/nameref13.sub
@@ -0,0 +1,115 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+declare -nt r=a
+
+f()
+{
+	declare a
+	declare -n r=a
+	declare -p a r
+}
+
+f
+unset -f f
+
+f()
+{
+	declare a
+	declare -n r
+	r=a
+	declare -p a r
+}
+f
+echo $?
+
+unset -f f
+
+P=12345
+function foo
+{
+	typeset -n r
+	typeset -n r=P
+	typeset -p r
+}
+
+foo
+unset P foo
+
+ref=outside
+
+f()
+{
+	unset var
+	declare -n ref=var
+	declare -n ref;
+	declare -p ref;
+}
+f
+
+unset ref foo
+
+typeset -n r=a
+
+f()
+{
+	typeset a
+	typeset -n r
+	typeset -n r
+	r=a
+
+	typeset -p a r
+}
+f
+echo $?
+unset -n r
+unset -f f
+
+function foo
+{
+	typeset -n r
+	typeset -n r
+	typeset -p r
+}
+
+foo
+unset -f foo
+
+
+function foo
+{
+	typeset r
+	typeset -n r
+	typeset -p r
+}
+foo
+unset -f foo
+
+foo()
+{
+	typeset -n foo
+	typeset foo=12345
+	typeset -p foo
+}
+foo
+unset -f foo
+
+foo()
+{
+	typeset -n foo
+	typeset -n foo=12345
+	typeset -p foo
+}
+foo
+unset -f foo
+
diff --git a/tests/nameref14.sub b/tests/nameref14.sub
new file mode 100644
index 0000000..a14c440
--- /dev/null
+++ b/tests/nameref14.sub
@@ -0,0 +1,56 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# exporting namerefs and putting namerefs in temp env post bash-4.3
+
+typeset -nx ref=var;
+typeset -p ref
+
+var=foo; str=''
+printenv ref                 # var
+ref+=$str    printenv ref    # var
+ref+="$str"  printenv ref    # var
+ref=$ref$str printenv ref    # var
+
+export ref		# follows nameref and exports var
+
+printenv var                 # foo
+ref+=$str    printenv var    # foo
+ref+="$str"  printenv var    # foo
+ref=$ref$str printenv var    # foo
+
+# none of these should change ref; should follow the nameref and export var
+unset var; unset -n ref; typeset -n ref=var
+
+echo before
+typeset -p ref var
+
+echo first
+ref=xxx typeset -p ref var
+
+echo invalid
+var= ref=5 typeset -p ref var
+
+echo after
+typeset -p ref var
+
+# ref isn't exported, so none of the printenvs should print anything
+unset var ; unset -n ref
+typeset -n ref=var;
+typeset -p ref
+
+var=foo; str=''
+printenv ref
+ref+=$str    printenv ref
+ref+="$str"  printenv ref
+ref=$ref$str printenv ref
diff --git a/tests/nameref15.sub b/tests/nameref15.sub
new file mode 100644
index 0000000..cce8fbd
--- /dev/null
+++ b/tests/nameref15.sub
@@ -0,0 +1,117 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+f() { local -n a=$1; a=X; }
+
+a=(0); f 'a[0]'
+while [[ -v a ]]; do declare -p a; unset a; done
+
+a=(0); f 'a'
+while [[ -v a ]]; do declare -p a; unset a; done
+
+b=(0); f 'b[0]'
+while [[ -v a ]]; do typeset -p a; unset a; done
+typeset -p b
+
+b=(0); f 'a[0]'
+while [[ -v a ]]; do typeset -p a; unset a; done
+typeset -p b
+
+add_X_echo()
+{
+	typeset -n ref=$1
+	ref+=X
+	echo inside $ref
+}
+
+ref=
+add_X_echo ref
+echo outside "$ref"
+unset ref
+
+# same test, but assigning nameref variable circular reference directly
+xxx_func()
+{
+	typeset -n xxx=xxx
+	xxx=foo
+	declare -p xxx
+	echo $FUNCNAME: inside: xxx = $xxx
+}
+
+xxx=7
+echo before: $xxx
+xxx_func
+echo after: $xxx
+
+unset xxx
+unset -f xxx_func
+
+typeset -n ref=ref
+
+typeset -n ref=re ref+=f
+typeset -p ref
+ref=4
+typeset -p ref re
+
+export ref
+printenv ref
+printenv re
+
+unset ref ; unset -n ref
+unset foo; unset -n foo
+
+typeset -n foo=var[@]
+typeset -p foo
+typeset -n ref=var ref+=[@]
+typeset -p ref
+
+ref=42
+
+typeset -n bar
+bar=var[@]
+typeset -p bar
+bar=7
+
+unset a b
+unset -n a b
+
+typeset -n a=b b
+b=a[1]
+typeset -p a b
+a=foo
+typeset -p a b
+
+unset a
+typeset -n a=b
+declare a=foo
+typeset -p a b
+
+unset n v
+unset -n n v
+
+v=(0 1)
+typeset -n n=v
+unset n[0]
+typeset -p n v
+
+unset -n n
+
+v=(0 1)
+typeset -n n=v
+unset -n n
+typeset -p n v
+
+v=(0 1)
+declare -n n=v[1]
+unset n
+declare -p n v
diff --git a/tests/nameref16.sub b/tests/nameref16.sub
new file mode 100644
index 0000000..d07a3a0
--- /dev/null
+++ b/tests/nameref16.sub
@@ -0,0 +1,57 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# post-bash-4.3 changes for more ksh93 compatibility when following nameref
+# chains and using typeset/declare -n to operate on nameref variables rather
+# than the variables they reference
+
+# don't follow nameref chain when using declare -n and at the global scope
+unset -n r1 r2
+
+typeset -n r1=r2
+typeset -n r2=x
+typeset -n r1=y
+
+typeset -p r1 r2 x y
+
+# same behavior when in a shell function
+foo()
+{
+	typeset -n r1=r2
+	typeset -n r2=x
+	typeset -n r1=y
+
+	typeset -p r1 r2 x y
+}
+unset -n r1 r2
+foo
+unset -f foo
+
+# same behavior when namerefs aren't chained
+unset -n r1 r2
+
+typeset -n r1=z
+typeset -n r2=x
+typeset -n r1=y
+typeset -p r1 r2 x y
+
+# same behavior when referenced variables have values
+unset -n r1 r2
+
+x=one
+y=two
+typeset -n r1=r2
+typeset -n r2=x
+typeset -n r1=y
+
+typeset -p r1 r2 x y
diff --git a/tests/nameref17.sub b/tests/nameref17.sub
new file mode 100644
index 0000000..b8c3cc7
--- /dev/null
+++ b/tests/nameref17.sub
@@ -0,0 +1,116 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# test behavior of readonly namerefs and namerefs referencing readonly variables
+
+# readonly nameref variable referencing read-write global variable
+
+bar=one
+declare -rn foo0=bar
+unset foo0	# unsets bar
+declare -p bar
+unset -n foo0	# cannot unset
+declare -p foo0
+
+declare +r foo0		# modifies bar
+declare -p foo0 bar
+declare +r -n foo0	# error
+declare +n foo0		# error
+unset bar
+
+# readonly nameref variable without a value
+typeset -n foo1
+typeset -r foo1
+
+typeset -p foo1
+
+typeset foo1=bar		# error
+typeset +r foo1			# no-op, follows nameref chain to nothing
+typeset -p foo1
+
+# nameref pointing to read-only global variable
+foo2=bar
+typeset -n foo2
+typeset -r foo2			# changes bar
+
+typeset -p foo2 bar
+
+foo2=bar			# error?
+typeset +r foo2			# attempts to change bar, error
+typeset -p foo2 bar		# nameref unchanged
+
+# read-only nameref pointing to read-only global variable
+bar3=three
+declare -rn foo3=bar3
+unset foo3	# unsets bar3
+
+bar3=three
+declare -p bar3
+unset -n foo3	# cannot unset
+
+readonly bar3
+declare +r foo3		# error attempting to reference bar3
+declare -p foo3 bar3
+declare +r -n foo3	# error
+
+# readonly nameref pointing to read-write local -- can we remove nameref attr?
+func()
+{
+	typeset bar4=four
+
+	# readonly nameref
+	typeset -n -r foo4=bar4
+
+	typeset -p foo4 bar4
+
+	typeset +n foo4
+
+	typeset -p foo4
+}
+func
+unset -f func
+
+# readonly nameref pointing to read-write global -- can we remove nameref attr?
+bar4=four
+foo4=bar4
+# readonly nameref
+typeset -n foo4
+typeset -r -n foo4
+
+typeset -p foo4 bar4
+
+typeset +n foo4
+typeset -p foo4
+
+bar4=four
+: ${foo4=bar4}
+
+typeset -p foo4 bar4
+
+# readonly local nameref without a value -- can we remove nameref attribute?
+func()
+{
+	declare -r -n foo5
+	declare -p foo5
+	declare +n foo5
+	declare -p foo5
+}
+func
+unset -f func
+
+# readonly global nameref without a value -- can we remove nameref attribute?
+declare -n foo5
+declare -r -n foo5
+declare -p foo5
+declare +n foo5
+declare -p foo5
diff --git a/tests/nameref18.sub b/tests/nameref18.sub
new file mode 100644
index 0000000..a29fe37
--- /dev/null
+++ b/tests/nameref18.sub
@@ -0,0 +1,67 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+declare -n ref=XXX[0]
+mapfile ref <<< $'1\n2'
+declare -p XXX[0]
+
+unset -n ref
+
+declare -n ref=XXX[0]
+declare -A ref
+ref[foo]=bar
+declare -p XXX[0]
+
+unset -n ref
+unset XXX
+
+typeset -n ref=XXX[0]
+typeset ref=4
+
+typeset -p ref XXX
+
+unset -n ref
+unset XXX
+
+declare -n ref=XXX[0]
+ref+=([2]=x)
+declare -p ref XXX[0]
+unset -n ref
+
+declare -n ref=XXX[0]
+read -a ref <<< "A B C"
+declare -p XXX[0]
+unset -n ref
+
+declare -n ref=XXX[0]
+unset ref
+ref=()
+declare -p ref
+
+coproc ref { :; }; declare -p ${!ref}
+wait
+
+unset -n ref
+
+declare -n ref=var[123]
+unset ref
+declare ref=
+declare -p ref ${!ref} var
+
+unset ref 
+declare ref+=
+declare -p ref ${!ref} var
+
+declare +t ref
+ref=X
+declare -p ref ${!ref} var
diff --git a/tests/nameref19.sub b/tests/nameref19.sub
new file mode 100644
index 0000000..b00f68e
--- /dev/null
+++ b/tests/nameref19.sub
@@ -0,0 +1,64 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# can we unset the nameref attribute on variables with values that reference
+# unset variables?
+
+unset bar
+declare -n foo="bar"
+declare -p foo
+
+declare +n foo
+declare -p foo bar
+
+declare -n foo
+declare -p foo
+
+# let's try removing the nameref attribute -- other attributes and assignments
+# apply to the nameref target
+
+declare +n -i foo=7+4
+declare -p foo bar
+
+unset foo bar
+
+# but if the nameref variable doesn't have a value, the attributes apply to
+# the nameref variable itself. thanks ksh93
+
+declare -n foo6
+declare -xi foo6
+declare -p foo6
+
+# and when we remove the nameref attribute, the other attributes remain
+
+declare +n foo6
+declare -p foo6
+
+unset foo6
+
+# make sure these cases continue to work
+
+# nameref referencing an existing, set variable
+declare -n foo=bar
+bar='Hello World!'
+declare -p foo bar
+declare +n foo
+declare -p foo bar
+unset foo bar
+
+# nameref referencing an existing, unset variable
+declare -n foo=bar
+declare bar
+declare -p foo bar
+declare +n foo
+declare -p foo bar
diff --git a/tests/nameref2.sub b/tests/nameref2.sub
new file mode 100644
index 0000000..547cc19
--- /dev/null
+++ b/tests/nameref2.sub
@@ -0,0 +1,7 @@
+# test readonly nameref variables
+# ksh93 allows this but not typeset -rn ref=foo?
+typeset -n ref=foo
+readonly ref
+foo=4
+
+echo $ref
diff --git a/tests/nameref20.sub b/tests/nameref20.sub
new file mode 100644
index 0000000..715bc4d
--- /dev/null
+++ b/tests/nameref20.sub
@@ -0,0 +1,84 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# a collection of cases in bug reports after bash-5.0-alpha was released
+
+declare -n r=v[0]
+v=(X); r=Y
+declare -p ${!v*}
+printf "%s: <%s>\n" "r" "$r" "v" "$v"
+
+unset -n r
+unset -v v
+
+declare -n ref=var; declare -a ref
+ref=(X)
+declare -p ref var
+
+unset -n ref
+unset -v var
+
+f() { declare -n ref=var; declare ref=(X); declare -p ref var; };
+f
+
+unset -f f
+
+f() { declare -n ref=var; declare -g ref=(X); declare -p ref var; };
+
+declare -n ref=foo
+f
+echo outside:
+declare -p foo
+
+unset -n ref
+unset -v foo
+unset -f f
+
+f() { declare -n ref=var; declare -a ref; ref=(X); declare -p ref var; }
+
+f
+echo outside:
+declare -p ref var
+unset -f f
+
+f() { declare -n ref=var; declare ref; ref=X; declare -p ref var; }
+
+f
+echo outside:
+declare -p ref var
+
+unset -f f
+
+unset -n ref; unset var
+
+f()
+{
+	declare var=X; declare -n ref=var; declare ref=(Y)
+	declare -p ref var
+}
+f
+
+unset -f f
+
+declare -n ref=var
+f() { local ref=Y; declare -p ref var; local; }
+
+var=X
+f
+
+unset -v var
+f
+
+unset -n ref
+unset -f f
+
diff --git a/tests/nameref21.sub b/tests/nameref21.sub
new file mode 100644
index 0000000..08d8f56
--- /dev/null
+++ b/tests/nameref21.sub
@@ -0,0 +1,69 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# issues with local variables and local namerefs post-bash-4.4
+
+f()
+{
+	local -n ref=var
+	local -A ref=([1]=)
+#	declare -p ref var
+	ref=([2]=)
+	declare -p ref var
+}
+
+unset ref  var
+f
+
+unset ref; var=0
+f
+
+unset var
+unset -f f
+
+f()
+{	
+	local -n ref=var
+	local -a ref=([1]=)
+	ref=([2]=)
+	declare -p ref var
+}
+
+unset ref var
+f
+
+unset ref; var=0
+f
+
+unset var
+unset -f f
+
+f() { local -n ref=var; local -i ref=([1]=); declare -p ref var; }
+
+unset var
+f
+
+var=0
+f
+
+unset var
+unset -f f
+
+f() { local -n ref=var; local ref=1; declare -p ref var; }
+
+var=0
+f
+
+unset var
+unset -f f
+
diff --git a/tests/nameref3.sub b/tests/nameref3.sub
new file mode 100644
index 0000000..67cb098
--- /dev/null
+++ b/tests/nameref3.sub
@@ -0,0 +1,50 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# nameref requires changes to unset
+bar=one
+typeset -n foo=bar
+
+# normal unset unsets only variable nameref references
+# need unset -n to unset nameref itself
+unset foo
+echo "expect <unset>"
+recho ${bar-unset}
+echo "expect <unset>"
+recho ${foo-unset}
+echo "expect <bar>"
+recho ${!foo}
+unset -n foo
+echo "expect <unset>"
+recho "${!foo-unset}"
+
+readonly bar=two
+typeset -n foo=bar
+
+unset foo	# this should fail because bar is readonly
+
+echo "expect <two>"
+echo ${bar-unset}
+echo "expect <two>"
+echo ${foo-unset}
+
+# one question is what happens when you unset the underlying variable
+qux=three
+typeset -n ref
+ref=qux
+
+echo $ref
+unset qux
+echo ${ref-unset}
+qux=four
+echo ${ref-unset}
diff --git a/tests/nameref4.sub b/tests/nameref4.sub
new file mode 100644
index 0000000..6367d56
--- /dev/null
+++ b/tests/nameref4.sub
@@ -0,0 +1,234 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# test suite cribbed from ksh93 nameref tests
+typeset -i errors=0
+ckval()
+{
+	typeset -n one=$1
+
+	if [[ $one != $2 ]]; then
+		echo "one=$one != 2=$2"
+		(( errors++ ))
+	fi
+}
+		
+ckref()
+{
+	typeset -n one=$1 two=$2
+
+	if [[ $one != $two ]]; then
+		echo "one=$one != two=$two"
+		(( errors++ ))
+	fi
+}
+
+name=first
+
+ckref name name
+
+func1()
+{
+        typeset -n color=$1
+        func2 color
+}
+
+func2()
+{
+        typeset color=$1
+        set -- ${color[@]}
+        printf "<%s>" "$@"
+	echo
+}
+
+typeset -A color
+color[apple]=red
+color[grape]=purple
+color[banana]=yellow
+
+# XXX
+#func1 color
+
+unset foo bar
+export bar=foo
+typeset -n foo=bar
+ckval foo foo
+
+# XXX - need to see if we can do checks for self-referencing at assignment
+# time
+command typeset -n xx=yy
+command typeset -n yy=xx
+echo $?
+
+unset foo bar
+unset -n foo bar
+set foo
+typeset -n bar=$1
+foo=hello
+ckval bar hello
+
+# XXX -- another self-referencing error?
+# ksh93 makes this another invalid self-reference
+unset foo
+unset -n bar
+
+bar=123
+foobar()
+{
+	typeset -n foo=bar
+	typeset -n foo=bar
+
+	ckval foo 123
+}
+
+typeset -n short=long
+short=( a b )
+echo "expect <a b>"
+echo ${long[@]}
+unset long
+unset -n short
+
+# assignment to a previously-unset variable
+typeset -n short=long
+short=foo
+echo "expect <foo>"
+echo ${long}
+unset long
+unset -n short
+
+unset foo bar
+
+# simple array references and assignments
+typeset -n foo=bar
+bar=( 1 3 5 7 9)
+echo ${foo[@]}
+echo ${foo[4]}
+foo[2]=42
+echo ${bar[@]}
+
+barfunc()
+{
+	typeset -n v=$1
+	echo ${v[@]}
+	echo ${v[4]}
+	v[2]=44
+	echo ${bar[@]}
+}
+barfunc bar
+
+unset -f foobar
+unset bar
+unset -n foo
+
+# should ref at global scope survive call to foobar()?
+unset ref x
+typeset -n ref
+x=42
+foobar()
+{
+	local xxx=3
+	ref=xxx
+	return 0
+}
+echo ${ref-unset}
+ref=x
+foobar
+ckval ref xxx
+ckval x xxx
+
+# assignment in a function to something possibly out of scope
+assignvar()
+{
+	typeset -n v=$1
+	shift
+	v="$@"
+}
+
+assignvar lex a b c d e
+echo "expect <a b c d e>"
+recho "${lex}"
+
+unset foo bar short long
+
+typeset -n foo='x[2]'
+
+x=(zero one two three four)
+foo=seven
+
+echo "expect <zero> <one> <seven> <three> <four>"
+recho "${x[@]}"
+
+unset ref x
+unset -n ref
+
+typeset -n ref
+ref=x
+# make sure nameref to a previously-unset variable creates the variable
+ref=42
+ckval x 42
+
+# make sure they work inside arithmetic expressions
+unset foo bar ref x xxx
+unset -n ref
+
+typeset -i ivar
+typeset -n iref=ivar
+
+ivar=4+3
+ckval ivar 7
+iref+=5
+ckval ivar 12
+echo $(( iref+4 ))
+(( iref=17 ))
+ckval ivar 17
+
+typeset +n iref
+unset iref ivar
+
+typeset +n foo bar
+unset foo bar
+
+# should the reference do immediate evaluation or deferred?
+set -- one two three four
+bar=4
+# XXX - what does foo get set to here?
+typeset -n foo='bar[0]'
+echo "expect <4>"
+echo ${bar[0]}
+echo "expect <4>"
+echo ${foo}
+echo "expect <4>"
+echo $foo
+ckval foo $bar
+
+# Need to add code and tests for nameref to array subscripts
+bar=(one two three four)
+
+typeset -n foo='bar[0]'
+typeset -n qux='bar[3]'
+echo "expect <one>"
+echo ${bar[0]}
+echo "expect <one>"
+echo ${foo}
+echo "expect <one>"
+echo $foo
+ckval foo $bar
+
+echo "expect <four>"
+echo $qux
+ckval qux ${bar[3]}
+
+# Need to add code and tests for `for' loop nameref variables
+
+echo errors = $errors
+exit $errors
diff --git a/tests/nameref5.sub b/tests/nameref5.sub
new file mode 100644
index 0000000..6855e99
--- /dev/null
+++ b/tests/nameref5.sub
@@ -0,0 +1,63 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# nameref variables as for loop index variables are special
+v1=1
+v2=2
+
+# simple for loop
+for v in v1 v2
+do
+	typeset -n ref=$v
+	echo $ref
+done
+unset v
+
+set -- first second third fourth fifth
+
+# unless you put a ${!v} in the for loop, ksh93 misbehaves
+typeset -n v=v1
+for v in v1 v2; do
+	echo "${!v}: $v"
+done
+unset v
+
+# example cribbed from ksh93 o'reilly book
+first="I am first"
+second="I am in the middle"
+third="I am last"
+
+typeset -n ref=first
+for ref in first second third ; do
+	echo "ref -> ${!ref}, value: $ref"
+done
+echo final state: "ref -> ${!ref}, value: $ref"
+
+readonly one=1
+readonly two=2
+readonly three=3
+
+typeset -n ref=one
+for ref in one two three; do
+	echo "ref -> ${!ref}, value: $ref"
+done
+echo final state: "ref -> ${!ref}, value: $ref"
+
+unset ref
+typeset -n ref=one
+readonly ref
+
+for ref in one two three; do
+	echo "ref -> ${!ref}, value: $ref"
+done
+echo final state: "ref -> ${!ref}, value: $ref"
diff --git a/tests/nameref6.sub b/tests/nameref6.sub
new file mode 100644
index 0000000..8497967
--- /dev/null
+++ b/tests/nameref6.sub
@@ -0,0 +1,57 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# these should be errors
+typeset -n x=x
+#echo $x -- $?
+
+typeset -n x[3]=x
+#echo $x -- $?
+
+x=(the browns suck)
+y=(one two three)
+# should be an error but not disturb the current contents of x
+# maybe rethink that later
+typeset -n x=y
+echo $x -- $?
+
+typeset -n
+
+unset x y
+
+y=42
+typeset -i x=1
+
+# the integer attribute causes arithmetic eval to be done
+# we should not allow namerefs to non-identifiers
+typeset -n x=y
+echo $x -- $?
+
+typeset +n x
+echo $x -- $?
+
+# same kind of thing
+
+unset -n x
+unset y
+
+set -- first second third
+y=2
+typeset -i x=1
+
+typeset -n x=y
+echo $x -- $?
+echo ${x} -- $?
+
+typeset +n x
+echo $x -- $?
diff --git a/tests/nameref7.sub b/tests/nameref7.sub
new file mode 100644
index 0000000..5e67ac0
--- /dev/null
+++ b/tests/nameref7.sub
@@ -0,0 +1,31 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+fn ()
+{
+	declare -n var=foo; var=bar
+}
+
+unset foo
+fn
+echo ${foo:-unset}
+
+unset -f fn
+unset foo
+fn()
+{
+	declare -n var; var=foo
+}
+
+fn
+echo ${foo:-unset}
diff --git a/tests/nameref8.sub b/tests/nameref8.sub
new file mode 100644
index 0000000..465463b
--- /dev/null
+++ b/tests/nameref8.sub
@@ -0,0 +1,74 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+function f1
+{
+	typeset -n v=$1
+
+	v=inside
+}
+
+v=global
+f1 v
+echo $v
+
+unset v
+unset -f f1
+
+function foo
+{
+	typeset x=one
+
+	typeset -n y=$1
+	y=two
+	echo inside: $x
+}
+
+foo x
+echo outside: $x
+
+function foo2
+{
+	typeset -n x=$1
+
+	x=foo
+}
+
+foo2 x
+echo $x
+
+unset -f foo
+function foo { typeset -n v=$1; v=local; }
+
+v=global
+foo v
+echo $v
+
+unset v
+
+# invalid self reference at global scope
+typeset -n v=v
+
+# can we catch a circular self-reference?
+typeset -n v=w
+typeset -n w=x
+typeset -n x=v
+
+x=4
+echo x = $x
+
+unset -n v w x
+
+# can we keep local variables invisible when we add nameref attribute?
+function f { typeset x; typeset -n x; x=y; }
+f
diff --git a/tests/nameref9.sub b/tests/nameref9.sub
new file mode 100644
index 0000000..e76c21b
--- /dev/null
+++ b/tests/nameref9.sub
@@ -0,0 +1,8 @@
+arr=( idx1 idx2 )
+i='arr[1]'
+echo ${!i}
+echo ${!i/x/X}
+
+typeset -n f='arr[1]'
+echo ${f}
+echo ${f/x/X}
diff --git a/tests/new-exp.right b/tests/new-exp.right
new file mode 100644
index 0000000..752bba5
--- /dev/null
+++ b/tests/new-exp.right
@@ -0,0 +1,725 @@
+argv[1] = <foo bar>
+argv[1] = <foo>
+argv[1] = </usr/homes/chet>
+argv[1] = </usr/homes/chet>
+argv[1] = </usr/homes/chet>
+./new-exp.tests: line 41: HOME: }: syntax error: operand expected (error token is "}")
+unset
+argv[1] = </usr/homes/chet>
+argv[1] = </usr/homes/chet>
+argv[1] = </usr/homes/chet>
+argv[1] = </usr/homes/chet>
+argv[1] = </usr/homes/chet>
+argv[1] = </usr/homes/chet>
+argv[1] = </usr/homes/chet>
+argv[1] = <*@>
+argv[1] = <*@>
+argv[1] = <@*>
+argv[1] = <)>
+argv[1] = <")">
+argv[1] = <-abcd>
+argv[2] = <->
+argv[1] = <-abcd>
+argv[2] = <->
+argv[1] = <-abcd->
+bar foo
+bar foo
+bar foo
+barfoo
+barfoo
+\x
+argv[1] = <abcd>
+argv[1] = <efg>
+argv[2] = <nop>
+argv[1] = <efg>
+argv[2] = <nop>
+argv[1] = <hijklmnop>
+argv[1] = <abcdefghijklmnop>
+argv[1] = <abcdefghijklmnop>
+argv[1] = <ab cd>
+argv[2] = <ef>
+argv[1] = <gh ij>
+argv[2] = <kl mn>
+argv[1] = <gh ij>
+argv[2] = <kl mn>
+argv[3] = <op>
+argv[1] = <ab cd>
+argv[2] = <ef>
+argv[3] = <gh ij>
+argv[4] = <kl mn>
+argv[5] = <op>
+argv[1] = </home/chet/foo//bar/abcabcabc>
+argv[1] = <home/chet/foo//bar/abcabcabc>
+argv[1] = <home>
+argv[1] = <home>
+argv[1] = <home>
+argv[1] = <home>
+argv[1] = <abcdefghijklmnop>
+argv[1] = <4>
+argv[1] = <op>
+argv[1] = <abcdefghijklmnop>
+argv[1] = <abcdefghijklmnop>
+argv[1] = <a>
+argv[2] = <b>
+argv[3] = <c>
+argv[4] = <d>
+argv[1] = <a>
+argv[2] = <b c>
+argv[3] = <d>
+./new-exp.tests: line 197: ABX: unbound variable
+./new-exp.tests: line 201: $6: cannot assign in this way
+argv[1] = <xxcde>
+argv[1] = <axxde>
+argv[1] = <abxyz>
+argv[1] = <abbcde>
+argv[1] = <abcde>
+argv[1] = <abcabe>
+argv[1] = <abcdlast>
+argv[1] = <abcde>
+argv[1] = <xxcd>
+argv[1] = <abxx>
+argv[1] = <xxgh>
+argv[1] = <efgh>
+argv[1] = <xxfgh>
+argv[1] = <zagh>
+argv[1] = <zaza>
+argv[1] = <zagh>
+argv[1] = <efza>
+argv[1] = <yyy>
+argv[2] = <yyy>
+argv[3] = <yyy>
+argv[4] = <yyy>
+argv[5] = <yyy>
+argv[6] = <yyy>
+argv[1] = <yyy>
+argv[2] = <yyy>
+argv[3] = <yyy>
+argv[4] = <yyy>
+argv[5] = <yyy>
+argv[6] = <yyy>
+argv[1] = <yyy>
+argv[2] = <yyy>
+argv[3] = <yyy>
+argv[4] = <yyy>
+argv[5] = <yyy>
+argv[6] = <yyy>
+argv[1] = <yyy>
+argv[2] = <efgh>
+argv[3] = <ijkl>
+argv[4] = <mnop>
+argv[5] = <qrst>
+argv[6] = <uvwx>
+argv[1] = <abxx>
+argv[2] = <efxx>
+argv[3] = <ijxx>
+argv[4] = <mnxx>
+argv[5] = <qrxx>
+argv[6] = <uvxx>
+argv[1] = <xxcd>
+argv[1] = <xxcd>
+argv[2] = <xxgh>
+argv[3] = <xxkl>
+argv[4] = <xxop>
+argv[5] = <xxst>
+argv[6] = <xxwx>
+argv[1] = <abxx>
+argv[2] = <efxx>
+argv[3] = <ijxx>
+argv[4] = <mnxx>
+argv[5] = <qrxx>
+argv[6] = <uvxx>
+argv[1] = <zaza>
+argv[1] = <ijza>
+argv[1] = <zaza>
+argv[2] = <zaza>
+argv[3] = <zaza>
+argv[4] = <zaza>
+argv[5] = <zaza>
+argv[6] = <zaza>
+argv[1] = <zacd>
+argv[2] = <zagh>
+argv[3] = <zakl>
+argv[4] = <zaop>
+argv[5] = <zast>
+argv[6] = <zawx>
+argv[1] = <yyy>
+argv[2] = <yyy>
+argv[3] = <yyy>
+argv[4] = <yyy>
+argv[5] = <yyy>
+argv[6] = <yyy>
+argv[1] = <yyy>
+argv[2] = <efgh>
+argv[3] = <ijkl>
+argv[4] = <mnop>
+argv[5] = <qrst>
+argv[6] = <uvwx>
+argv[1] = <abcd>
+argv[2] = <efgh>
+argv[3] = <ijkl>
+argv[4] = <mnop>
+argv[5] = <qrst>
+argv[6] = <uvwyyy>
+
+This
+string
+has
+multiple
+lines.
+This-string-has-multiple-lines.
+this is a test of proc subst
+this is test 2
+a
+./new-exp2.sub: line 55: /tmp/redir-notthere: No such file or directory
+1
+
+./new-exp2.sub: line 62: 1111111111111111111111: command not found
+
+argv[1] = <6>
+./new-exp.tests: line 302: ${#:}: bad substitution
+argv[1] = <'>
+argv[1] = <">
+argv[1] = <"hello">
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <abcdef>
+argv[1] = <abc def>
+argv[1] = <abcdef>
+argv[1] = <abc>
+argv[2] = <def>
+argv[1] = <abcdef>
+argv[1] = <abc def>
+argv[1] = <abcdef>
+argv[1] = <abc def>
+argv[1] = <ab>
+argv[2] = <cd>
+argv[3] = <ef>
+argv[4] = <gh>
+argv[1] = <ab>
+argv[2] = <cd>
+argv[3] = <ef>
+argv[4] = <gh>
+argv[1] = <ab>
+argv[2] = <cd>
+argv[3] = <ef>
+argv[4] = <gh>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <hijklmnopqrstuv>
+argv[1] = <pqrstuv>
+argv[1] = <uvwxyz>
+argv[1] = <abcdefghijklmnopqrstuvwxyz>
+argv[1] = <abcdefghijklmnopqrst>
+argv[1] = <klmnopq>
+argv[1] = <klmnopq>
+argv[1] = <klmnopq>
+argv[1] = <"2 3">
+argv[1] = <"2:3">
+argv[1] = <"34">
+argv[1] = <"3456">
+argv[1] = <"3456">
+argv[1] = <"3456">
+argv[1] = <^A>
+argv[2] = <^B>
+argv[3] = <^?>
+argv[1] = <^A>
+argv[2] = <^B>
+argv[3] = <^?>
+argv[1] = <^A>
+argv[2] = <^B>
+argv[3] = <^?>
+argv[1] = <^A>
+argv[2] = <^B>
+argv[3] = <^?>
+argv[1] = <one/two>
+argv[1] = <one/two>
+argv[1] = <two>
+argv[1] = <oneonetwo>
+argv[1] = <onetwo>
+argv[1] = <two>
+argv[1] = <oneonetwo>
+argv[1] = <a>
+argv[1] = <defghi>
+argv[1] = <efghi>
+argv[1] = <e*docrine>
+argv[1] = <e*docri*e>
+argv[1] = <endocrine>
+argv[1] = <endocrine>
+argv[1] = <endocrine>
+argv[1] = <endocrine>
+argv[1] = <endocrine>
+argv[1] = <endocrine>
+x
+x
+x
+xabc
+x
+x
+argv[1] = </usr/bin>
+argv[2] = </bin>
+argv[3] = </usr/local/bin>
+argv[4] = </usr/gnu/bin>
+argv[5] = </usr/bin/X11>
+argv[6] = </sbin>
+argv[7] = </usr/sbin>
+argv[1] = <r>
+argv[2] = <s>
+argv[3] = <t>
+argv[4] = <u>
+argv[5] = <v>
+argv[6] = <w>
+argv[7] = <x>
+argv[8] = <y>
+argv[9] = <z>
+argv[1] = <r>
+argv[2] = <s>
+argv[3] = <t>
+argv[4] = <u>
+argv[5] = <v>
+argv[6] = <w>
+argv[7] = <x>
+argv[8] = <y>
+argv[9] = <z>
+argv[1] = <r>
+argv[2] = <s>
+argv[3] = <t>
+argv[4] = <u>
+argv[5] = <v>
+argv[6] = <w>
+argv[7] = <x>
+argv[8] = <y>
+argv[9] = <z>
+argv[1] = <r>
+argv[2] = <s>
+argv[3] = <t>
+argv[4] = <u>
+argv[5] = <v>
+argv[6] = <w>
+argv[7] = <x>
+argv[8] = <y>
+argv[9] = <z>
+argv[1] = <a>
+argv[2] = <a>
+argv[3] = <a>
+argv[4] = <a>
+argv[5] = <a>
+argv[6] = <a>
+argv[7] = <a>
+argv[8] = <a>
+argv[9] = <a>
+argv[1] = <a>
+argv[2] = <a>
+argv[3] = <a>
+argv[4] = <a>
+argv[5] = <a>
+argv[6] = <a>
+argv[7] = <a>
+argv[8] = <a>
+argv[9] = <a>
+argv[1] = <r>
+argv[2] = <s>
+argv[3] = <t>
+argv[4] = <u>
+argv[5] = <v>
+argv[6] = <w>
+argv[7] = <x>
+argv[8] = <y>
+argv[9] = <z>
+argv[1] = <r>
+argv[2] = <s>
+argv[3] = <t>
+argv[4] = <u>
+argv[5] = <v>
+argv[6] = <w>
+argv[7] = <x>
+argv[8] = <y>
+argv[9] = <z>
+argv[1] = <r>
+argv[2] = <s>
+argv[3] = <t>
+argv[4] = <u>
+argv[5] = <v>
+argv[6] = <w>
+argv[7] = <x>
+argv[8] = <y>
+argv[9] = <z>
+argv[1] = <r>
+argv[2] = <s>
+argv[3] = <t>
+argv[4] = <u>
+argv[5] = <v>
+argv[6] = <w>
+argv[7] = <x>
+argv[8] = <y>
+argv[9] = <z>
+argv[1] = <r>
+argv[2] = <s>
+argv[3] = <t>
+argv[4] = <u>
+argv[5] = <v>
+argv[6] = <w>
+argv[7] = <x>
+argv[8] = <y>
+argv[9] = <z>
+argv[1] = <r>
+argv[2] = <s>
+argv[3] = <t>
+argv[4] = <u>
+argv[5] = <v>
+argv[6] = <w>
+argv[7] = <x>
+argv[8] = <y>
+argv[9] = <z>
+argv[1] = <a>
+argv[2] = <a>
+argv[3] = <a>
+argv[4] = <a>
+argv[5] = <a>
+argv[6] = <a>
+argv[7] = <a>
+argv[8] = <a>
+argv[9] = <a>
+argv[1] = <a>
+argv[2] = <a>
+argv[3] = <a>
+argv[4] = <a>
+argv[5] = <a>
+argv[6] = <a>
+argv[7] = <a>
+argv[8] = <a>
+argv[9] = <a>
+argv[1] = <r>
+argv[2] = <s>
+argv[3] = <t>
+argv[4] = <u>
+argv[5] = <v>
+argv[6] = <w>
+argv[7] = <x>
+argv[8] = <y>
+argv[9] = <z>
+argv[1] = <r>
+argv[2] = <s>
+argv[3] = <t>
+argv[4] = <u>
+argv[5] = <v>
+argv[6] = <w>
+argv[7] = <x>
+argv[8] = <y>
+argv[9] = <z>
+./new-exp.tests: line 520: $9: unbound variable
+./new-exp.tests: line 521: 9: unbound variable
+./new-exp.tests: line 522: UNSET: unbound variable
+./new-exp.tests: line 523: UNSET: unbound variable
+./new-exp.tests: line 524: UNSET: unbound variable
+./new-exp.tests: line 525: UNSET: unbound variable
+./new-exp.tests: line 526: UNSET: unbound variable
+argv[1] = <5>
+argv[1] = <#>
+argv[1] = <#>
+argv[1] = <>
+argv[1] = <_QUANTITY>
+argv[2] = <_QUART>
+argv[3] = <_QUEST>
+argv[4] = <_QUILL>
+argv[5] = <_QUOTA>
+argv[6] = <_QUOTE>
+argv[1] = <_QUANTITY>
+argv[2] = <_QUART>
+argv[3] = <_QUEST>
+argv[4] = <_QUILL>
+argv[5] = <_QUOTA>
+argv[6] = <_QUOTE>
+argv[1] = <_QUANTITY>
+argv[2] = <_QUART>
+argv[3] = <_QUEST>
+argv[4] = <_QUILL>
+argv[5] = <_QUOTA>
+argv[6] = <_QUOTE>
+argv[1] = <_QUANTITY-_QUART-_QUEST-_QUILL-_QUOTA-_QUOTE>
+argv[1] = <_QUANTITY>
+argv[2] = <_QUART>
+argv[3] = <_QUEST>
+argv[4] = <_QUILL>
+argv[5] = <_QUOTA>
+argv[6] = <_QUOTE>
+argv[1] = <_QUANTITY>
+argv[2] = <_QUART>
+argv[3] = <_QUEST>
+argv[4] = <_QUILL>
+argv[5] = <_QUOTA>
+argv[6] = <_QUOTE>
+./new-exp3.sub: line 36: ${!_Q* }: bad substitution
+./new-exp3.sub: line 41: ${!1*}: bad substitution
+./new-exp3.sub: line 43: ${!@*}: bad substitution
+Case01---3---A:B:C---
+Case02---1---A B C::---
+Case03---3---A:B:C---
+Case04---3---A:B:C---
+Case05---3---A:B:C---
+Case06---1---A B C::---
+Case07---3---A:B:C---
+Case08---3---A:B:C---
+./new-exp.tests: line 546: ${$(($#-1))}: bad substitution
+argv[1] = <a>
+argv[2] = <b>
+argv[3] = <c>
+argv[4] = <d>
+argv[5] = <e>
+argv[6] = <f>
+argv[7] = <g>
+argv[1] = <a>
+argv[2] = <b>
+argv[3] = <c>
+argv[4] = <d>
+argv[5] = <e>
+argv[1] = <a>
+argv[1] = <a>
+argv[2] = <b>
+argv[1] = <>
+./new-exp.tests: line 565: $(($# - 2)): substring expression < 0
+./new-exp.tests: line 567: -2: substring expression < 0
+argv[1] = <bin>
+argv[2] = <bin>
+argv[3] = <ucb>
+argv[4] = <bin>
+argv[5] = <.>
+argv[6] = <sbin>
+argv[7] = <sbin>
+argv[1] = </>
+argv[2] = </>
+argv[3] = </>
+argv[4] = </>
+argv[5] = </>
+argv[6] = </>
+argv[1] = <bin>
+argv[2] = <usr/bin>
+argv[3] = <usr/ucb>
+argv[4] = <usr/local/bin>
+argv[5] = <.>
+argv[6] = <sbin>
+argv[7] = <usr/sbin>
+argv[1] = </bin>
+argv[2] = </usr/bin>
+argv[3] = </usr/ucb>
+argv[4] = </usr/local/bin>
+argv[5] = <.>
+argv[6] = </sbin>
+argv[7] = </usr/sbin>
+argv[1] = </full/path/to>
+argv[1] = </>
+argv[1] = <full/path/to/x16>
+argv[1] = <x16>
+two
+one
+ne
+one
+
+one
+one
+one
+1 2 3 4 5 6 7 8 9
+9
+9
+0
+9
+8 9
+123456789
+9
+9
+4, A B C D
+2, C D
+h
+h
+--blah
+--blah
+lah
+lah
+abcde abcfg abchi
+foode foofg foohi
+argv[1] = <>
+argv[1] = <+>
+argv[1] = <+^?>
+argv[1] = <+>
+argv[1] = <^?2>
+argv[1] = <^?2>
+argv[1] = <^?>
+argv[1] = <^?>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <12>
+argv[1] = <>
+argv[1] = <>
+argv[1] = </tmp/test/TEST>
+foo is a function
+foo () 
+{ 
+    echo < <(cat x1)
+}
+foo () 
+{ 
+    echo < <(cat x1)
+}
+bar () { echo < <(cat x1) }
+bar is a function
+bar () 
+{ 
+    echo < <(cat x1)
+}
+start;ing0;ing1;ing2;ing3;ing4;ing5;ing6;ing7;ing8;ing9;ing10;ing11;ing12;ing13;ing14;ing15;ing16;ing17;ing18;ing19;ing20;ing21;ing22;ing23;ing24;ing25;ing26;ing27;ing28;ing29;ing30;ing31;ing32;ing33;ing34;ing35;ing36;ing37;ing38;ing39;ing40;ing41;ing42;ing43;ing44;ing45;ing46;ing47;ing48;ing49;ing50;ing51;ing52;ing53;ing54;ing55;ing56;ing57;ing58;ing59;ing60;ing61;ing62;ing63;ing64;ing65;ing66;ing67;ing68;ing69;ing70;ing71;ing72;ing73;ing74;ing75;ing76;ing77;ing78;ing79;ing80;ing81;ing82;ing83;ing84;ing85;ing86;ing87;ing88;ing89;ing90;ing91;ing92;ing93;ing94;ing95;ing96;ing97;ing98;ing99;ing100;ing101;ing102;ing103;ing104;ing105;ing106;ing107;ing108;ing109;ing110;ing111;ing112;ing113;ing114;ing115;ing116;ing117;ing118;ing119;ing120;ing121;ing122;ing123;ing124;ing125;ing126;ing127;ing128;ing129;ing130;ing131;ing132;ing133;ing134;ing135;ing136;ing137;ing138;ing139;ing140;ing141;ing142;ing143;ing144;ing145;ing146;ing147;ing148;ing149;ing150;ing151;ing152;ing153;ing154;ing155;ing156;ing157;ing158;ing159;ing160;ing161;ing162;ing163;ing164;ing165;ing166;ing167;ing168;ing169;ing170;ing171;ing172;ing173;ing174;ing175;ing176;ing177;ing178;ing179;ing180;ing181;ing182;ing183;ing184;ing185;ing186;ing187;ing188;ing189;ing190;ing191;ing192;ing193;ing194;ing195;ing196;ing197;ing198;ing199;ing200;ing201;ing202;ing203;ing204;ing205;ing206;ing207;ing208;ing209;ing210;ing211;ing212;ing213;ing214;ing215;ing216;ing217;ing218;ing219;ing220;ing221;ing222;ing223;ing224;ing225;ing226;ing227;ing228;ing229;ing230;ing231;ing232;ing233;ing234;ing235;ing236;ing237;ing238;ing239;ing240;ing241;ing242;ing243;ing244;ing245;ing246;ing247;ing248;ing249;ing250;ing251;ing252;ing253;ing254;ing255;ing256;ing257;ing258;ing259;ing260;ing261;ing262;ing263;ing264;ing265;ing266;ing267;ing268;ing269;ing270;ing271;ing272;ing273;ing274;ing275;ing276;ing277;ing278;ing279;ing280;ing281;ing282;ing283;ing284;ing285;ing286;ing287;ing288;ing289;ing290;ing291;ing292;ing293;ing294;ing295;ing296;ing297;ing298;ing299;ing300;ing301;ing302;ing303;ing304;ing305;ing306;ing307;ing308;ing309;ing310;ing311;ing312;ing313;ing314;ing315;ing316;ing317;ing318;ing319;ing320;ing321;ing322;ing323;ing324;ing325;ing326;ing327;ing328;ing329;ing330;ing331;ing332;ing333;ing334;ing335;ing336;ing337;ing338;ing339;ing340;ing341;ing342;ing343;ing344;ing345;ing346;ing347;ing348;ing349;ing350;ing351;ing352;ing353;ing354;ing355;ing356;ing357;ing358;ing359;ing360;ing361;ing362;ing363;ing364;ing365;ing366;ing367;ing368;ing369;ing370;ing371;ing372;ing373;ing374;ing375;ing376;ing377;ing378;ing379;ing380;ing381;ing382;ing383;ing384;ing385;ing386;ing387;ing388;ing389;ing390;ing391;ing392;ing393;ing394;ing395;ing396;ing397;ing398;ing399;ing400;ing401;ing402;ing403;ing404;ing405;ing406;ing407;ing408;ing409;ing410;ing411;ing412;ing413;ing414;ing415;ing416;ing417;ing418;ing419;ing420;ing421;ing422;ing423;ing424;ing425;ing426;ing427;ing428;ing429;ing430;ing431;ing432;ing433;ing434;ing435;ing436;ing437;ing438;ing439;ing440;ing441;ing442;ing443;ing444;ing445;ing446;ing447;ing448;ing449;ing450;ing451;ing452;ing453;ing454;ing455;ing456;ing457;ing458;ing459;ing460;ing461;ing462;ing463;ing464;ing465;ing466;ing467;ing468;ing469;ing470;ing471;ing472;ing473;ing474;ing475;ing476;ing477;ing478;ing479;ing480;ing481;ing482;ing483;ing484;ing485;ing486;ing487;ing488;ing489;ing490;ing491;ing492;ing493;ing494;ing495;ing496;ing497;ing498;ing499;ing500;ing501;ing502;ing503;ing504;ing505;ing506;ing507;ing508;ing509;ing510;ing511;ing512;ing513;ing514;ing515;ing516;ing517;ing518;ing519;ing520;ing521;ing522;ing523;ing524;ing525;ing526;ing527;ing528;ing529;ing530;ing531;ing532;ing533;ing534;ing535;ing536;ing537;ing538;ing539;ing540;ing541;ing542;ing543;ing544;ing545;ing546;ing547;ing548;ing549;ing550;ing551;ing552;ing553;ing554;ing555;ing556;ing557;ing558;ing559;ing560;ing561;ing562;ing563;ing564;ing565;ing566;ing567;ing568;ing569;ing570;ing571;ing572;ing573;ing574;ing575;ing576;ing577;ing578;ing579;ing580;ing581;ing582;ing583;ing584;ing585;ing586;ing587;ing588;ing589;ing590;ing591;ing592;ing593;ing594;ing595;ing596;ing597;ing598;ing599;ing600;ing601;ing602;ing603;ing604;ing605;ing606;ing607;ing608;ing609;ing610;ing611;ing612;ing613;ing614;ing615;ing616;ing617;ing618;ing619;ing620;ing621;ing622;ing623;ing624;ing625;ing626;ing627;ing628;ing629;ing630;ing631;ing632;ing633;ing634;ing635;ing636;ing637;ing638;ing639;ing640;ing641;ing642;ing643;ing644;ing645;ing646;ing647;ing648;ing649;ing650;ing651;ing652;ing653;ing654;ing655;ing656;ing657;ing658;ing659;ing660;ing661;ing662;ing663;ing664;ing665;ing666;ing667;ing668;ing669;ing670;ing671;ing672;ing673;ing674;ing675;ing676;ing677;ing678;ing679;ing680;ing681;ing682;ing683;ing684;ing685;ing686;ing687;ing688;ing689;ing690;ing691;ing692;ing693;ing694;ing695;ing696;ing697;ing698;ing699;ing700;ing701;ing702;ing703;ing704;ing705;ing706;ing707;ing708;ing709;ing710;ing711;ing712;ing713;ing714;ing715;ing716;ing717;ing718;ing719;ing720;ing721;ing722;ing723;ing724;ing725;ing726;ing727;ing728;ing729;ing730;ing731;ing732;ing733;ing734;ing735;ing736;ing737;ing738;ing739;ing740;ing741;ing742;ing743;ing744;ing745;ing746;ing747;ing748;ing749;ing750;ing751;ing752;ing753;ing754;ing755;ing756;ing757;ing758;ing759;ing760;ing761;ing762;ing763;ing764;ing765;ing766;ing767;ing768;ing769;ing770;ing771;ing772;ing773;ing774;ing775;ing776;ing777;ing778;ing779;ing780;ing781;ing782;ing783;ing784;ing785;ing786;ing787;ing788;ing789;ing790;ing791;ing792;ing793;ing794;ing795;ing796;ing797;ing798;ing799;ing800;ing801;ing802;ing803;ing804;ing805;ing806;ing807;ing808;ing809;ing810;ing811;ing812;ing813;ing814;ing815;ing816;ing817;ing818;ing819;ing820;ing821;ing822;ing823;ing824;ing825;ing826;ing827;ing828;ing829;ing830;ing831;ing832;ing833;ing834;ing835;ing836;ing837;ing838;ing839;ing840;ing841;ing842;ing843;ing844;ing845;ing846;ing847;ing848;ing849;ing850;ing851;ing852;ing853;ing854;ing855;ing856;ing857;ing858;ing859;ing860;ing861;ing862;ing863;ing864;ing865;ing866;ing867;ing868;ing869;ing870;ing871;ing872;ing873;ing874;ing875;ing876;ing877;ing878;ing879;ing880;ing881;ing882;ing883;ing884;ing885;ing886;ing887;ing888;ing889;ing890;ing891;ing892;ing893;ing894;ing895;ing896;ing897;ing898;ing899;ing900;ing901;ing902;ing903;ing904;ing905;ing906;ing907;ing908;ing909;ing910;ing911;ing912;ing913;ing914;ing915;ing916;ing917;ing918;ing919;ing920;ing921;ing922;ing923;ing924;ing925;ing926;ing927;ing928;ing929;ing930;ing931;ing932;ing933;ing934;ing935;ing936;ing937;ing938;ing939;ing940;ing941;ing942;ing943;ing944;ing945;ing946;ing947;ing948;ing949;ing950;ing951;ing952;ing953;ing954;ing955;ing956;ing957;ing958;ing959;ing960;ing961;ing962;ing963;ing964;ing965;ing966;ing967;ing968;ing969;ing970;ing971;ing972;ing973;ing974;ing975;ing976;ing977;ing978;ing979;ing980;ing981;ing982;ing983;ing984;ing985;ing986;ing987;ing988;ing989;ing990;ing991;ing992;ing993;ing994;ing995;ing996;ing997;ing998;ing999
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+start;string0;string1;string2;string3;string4;string5;string6;string7;string8;string9;string10;string11;string12;string13;string14;string15;string16;string17;string18;string19;string20;string21;string22;string23;string24;string25;string26;string27;string28;string29;string30;string31;string32;string33;string34;string35;string36;string37;string38;string39;string40;string41;string42;string43;string44;string45;string46;string47;string48;string49;string50;string51;string52;string53;string54;string55;string56;string57;string58;string59;string60;string61;string62;string63;string64;string65;string66;string67;string68;string69;string70;string71;string72;string73;string74;string75;string76;string77;string78;string79;string80;string81;string82;string83;string84;string85;string86;string87;string88;string89;string90;string91;string92;string93;string94;string95;string96;string97;string98;string99;string100;string101;string102;string103;string104;string105;string106;string107;string108;string109;string110;string111;string112;string113;string114;string115;string116;string117;string118;string119;string120;string121;string122;string123;string124;string125;string126;string127;string128;string129;string130;string131;string132;string133;string134;string135;string136;string137;string138;string139;string140;string141;string142;string143;string144;string145;string146;string147;string148;string149;string150;string151;string152;string153;string154;string155;string156;string157;string158;string159;string160;string161;string162;string163;string164;string165;string166;string167;string168;string169;string170;string171;string172;string173;string174;string175;string176;string177;string178;string179;string180;string181;string182;string183;string184;string185;string186;string187;string188;string189;string190;string191;string192;string193;string194;string195;string196;string197;string198;string199;string200;string201;string202;string203;string204;string205;string206;string207;string208;string209;string210;string211;string212;string213;string214;string215;string216;string217;string218;string219;string220;string221;string222;string223;string224;string225;string226;string227;string228;string229;string230;string231;string232;string233;string234;string235;string236;string237;string238;string239;string240;string241;string242;string243;string244;string245;string246;string247;string248;string249;string250;string251;string252;string253;string254;string255;string256;string257;string258;string259;string260;string261;string262;string263;string264;string265;string266;string267;string268;string269;string270;string271;string272;string273;string274;string275;string276;string277;string278;string279;string280;string281;string282;string283;string284;string285;string286;string287;string288;string289;string290;string291;string292;string293;string294;string295;string296;string297;string298;string299;string300;string301;string302;string303;string304;string305;string306;string307;string308;string309;string310;string311;string312;string313;string314;string315;string316;string317;string318;string319;string320;string321;string322;string323;string324;string325;string326;string327;string328;string329;string330;string331;string332;string333;string334;string335;string336;string337;string338;string339;string340;string341;string342;string343;string344;string345;string346;string347;string348;string349;string350;string351;string352;string353;string354;string355;string356;string357;string358;string359;string360;string361;string362;string363;string364;string365;string366;string367;string368;string369;string370;string371;string372;string373;string374;string375;string376;string377;string378;string379;string380;string381;string382;string383;string384;string385;string386;string387;string388;string389;string390;string391;string392;string393;string394;string395;string396;string397;string398;string399;string400;string401;string402;string403;string404;string405;string406;string407;string408;string409;string410;string411;string412;string413;string414;string415;string416;string417;string418;string419;string420;string421;string422;string423;string424;string425;string426;string427;string428;string429;string430;string431;string432;string433;string434;string435;string436;string437;string438;string439;string440;string441;string442;string443;string444;string445;string446;string447;string448;string449;string450;string451;string452;string453;string454;string455;string456;string457;string458;string459;string460;string461;string462;string463;string464;string465;string466;string467;string468;string469;string470;string471;string472;string473;string474;string475;string476;string477;string478;string479;string480;string481;string482;string483;string484;string485;string486;string487;string488;string489;string490;string491;string492;string493;string494;string495;string496;string497;string498;string499;string500;string501;string502;string503;string504;string505;string506;string507;string508;string509;string510;string511;string512;string513;string514;string515;string516;string517;string518;string519;string520;string521;string522;string523;string524;string525;string526;string527;string528;string529;string530;string531;string532;string533;string534;string535;string536;string537;string538;string539;string540;string541;string542;string543;string544;string545;string546;string547;string548;string549;string550;string551;string552;string553;string554;string555;string556;string557;string558;string559;string560;string561;string562;string563;string564;string565;string566;string567;string568;string569;string570;string571;string572;string573;string574;string575;string576;string577;string578;string579;string580;string581;string582;string583;string584;string585;string586;string587;string588;string589;string590;string591;string592;string593;string594;string595;string596;string597;string598;string599;string600;string601;string602;string603;string604;string605;string606;string607;string608;string609;string610;string611;string612;string613;string614;string615;string616;string617;string618;string619;string620;string621;string622;string623;string624;string625;string626;string627;string628;string629;string630;string631;string632;string633;string634;string635;string636;string637;string638;string639;string640;string641;string642;string643;string644;string645;string646;string647;string648;string649;string650;string651;string652;string653;string654;string655;string656;string657;string658;string659;string660;string661;string662;string663;string664;string665;string666;string667;string668;string669;string670;string671;string672;string673;string674;string675;string676;string677;string678;string679;string680;string681;string682;string683;string684;string685;string686;string687;string688;string689;string690;string691;string692;string693;string694;string695;string696;string697;string698;string699;string700;string701;string702;string703;string704;string705;string706;string707;string708;string709;string710;string711;string712;string713;string714;string715;string716;string717;string718;string719;string720;string721;string722;string723;string724;string725;string726;string727;string728;string729;string730;string731;string732;string733;string734;string735;string736;string737;string738;string739;string740;string741;string742;string743;string744;string745;string746;string747;string748;string749;string750;string751;string752;string753;string754;string755;string756;string757;string758;string759;string760;string761;string762;string763;string764;string765;string766;string767;string768;string769;string770;string771;string772;string773;string774;string775;string776;string777;string778;string779;string780;string781;string782;string783;string784;string785;string786;string787;string788;string789;string790;string791;string792;string793;string794;string795;string796;string797;string798;string799;string800;string801;string802;string803;string804;string805;string806;string807;string808;string809;string810;string811;string812;string813;string814;string815;string816;string817;string818;string819;string820;string821;string822;string823;string824;string825;string826;string827;string828;string829;string830;string831;string832;string833;string834;string835;string836;string837;string838;string839;string840;string841;string842;string843;string844;string845;string846;string847;string848;string849;string850;string851;string852;string853;string854;string855;string856;string857;string858;string859;string860;string861;string862;string863;string864;string865;string866;string867;string868;string869;string870;string871;string872;string873;string874;string875;string876;string877;string878;string879;string880;string881;string882;string883;string884;string885;string886;string887;string888;string889;string890;string891;string892;string893;string894;string895;string896;string897;string898;string899;string900;string901;string902;string903;string904;string905;string906;string907;string908;string909;string910;string911;string912;string913;string914;string915;string916;string917;string918;string919;string920;string921;string922;string923;string924;string925;string926;string927;string928;string929;string930;string931;string932;string933;string934;string935;string936;string937;string938;string939;string940;string941;string942;string943;string944;string945;string946;string947;string948;string949;string950;string951;string952;string953;string954;string955;string956;string957;string958;string959;string960;string961;string962;string963;string964;string965;string966;string967;string968;string969;string970;string971;string972;string973;string974;string975;string976;string977;string978;string979;string980;string981;string982;string983;string984;string985;string986;string987;string988;string989;string990;string991;string992;string993;string994;string995;string996;string997;string998;string999
+start;ing0;ing1;ing2;ing3;ing4;ing5;ing6;ing7;ing8;ing9;ing10;ing11;ing12;ing13;ing14;ing15;ing16;ing17;ing18;ing19;ing20;ing21;ing22;ing23;ing24;ing25;ing26;ing27;ing28;ing29;ing30;ing31;ing32;ing33;ing34;ing35;ing36;ing37;ing38;ing39;ing40;ing41;ing42;ing43;ing44;ing45;ing46;ing47;ing48;ing49;ing50;ing51;ing52;ing53;ing54;ing55;ing56;ing57;ing58;ing59;ing60;ing61;ing62;ing63;ing64;ing65;ing66;ing67;ing68;ing69;ing70;ing71;ing72;ing73;ing74;ing75;ing76;ing77;ing78;ing79;ing80;ing81;ing82;ing83;ing84;ing85;ing86;ing87;ing88;ing89;ing90;ing91;ing92;ing93;ing94;ing95;ing96;ing97;ing98;ing99;ing100;ing101;ing102;ing103;ing104;ing105;ing106;ing107;ing108;ing109;ing110;ing111;ing112;ing113;ing114;ing115;ing116;ing117;ing118;ing119;ing120;ing121;ing122;ing123;ing124;ing125;ing126;ing127;ing128;ing129;ing130;ing131;ing132;ing133;ing134;ing135;ing136;ing137;ing138;ing139;ing140;ing141;ing142;ing143;ing144;ing145;ing146;ing147;ing148;ing149;ing150;ing151;ing152;ing153;ing154;ing155;ing156;ing157;ing158;ing159;ing160;ing161;ing162;ing163;ing164;ing165;ing166;ing167;ing168;ing169;ing170;ing171;ing172;ing173;ing174;ing175;ing176;ing177;ing178;ing179;ing180;ing181;ing182;ing183;ing184;ing185;ing186;ing187;ing188;ing189;ing190;ing191;ing192;ing193;ing194;ing195;ing196;ing197;ing198;ing199;ing200;ing201;ing202;ing203;ing204;ing205;ing206;ing207;ing208;ing209;ing210;ing211;ing212;ing213;ing214;ing215;ing216;ing217;ing218;ing219;ing220;ing221;ing222;ing223;ing224;ing225;ing226;ing227;ing228;ing229;ing230;ing231;ing232;ing233;ing234;ing235;ing236;ing237;ing238;ing239;ing240;ing241;ing242;ing243;ing244;ing245;ing246;ing247;ing248;ing249;ing250;ing251;ing252;ing253;ing254;ing255;ing256;ing257;ing258;ing259;ing260;ing261;ing262;ing263;ing264;ing265;ing266;ing267;ing268;ing269;ing270;ing271;ing272;ing273;ing274;ing275;ing276;ing277;ing278;ing279;ing280;ing281;ing282;ing283;ing284;ing285;ing286;ing287;ing288;ing289;ing290;ing291;ing292;ing293;ing294;ing295;ing296;ing297;ing298;ing299;ing300;ing301;ing302;ing303;ing304;ing305;ing306;ing307;ing308;ing309;ing310;ing311;ing312;ing313;ing314;ing315;ing316;ing317;ing318;ing319;ing320;ing321;ing322;ing323;ing324;ing325;ing326;ing327;ing328;ing329;ing330;ing331;ing332;ing333;ing334;ing335;ing336;ing337;ing338;ing339;ing340;ing341;ing342;ing343;ing344;ing345;ing346;ing347;ing348;ing349;ing350;ing351;ing352;ing353;ing354;ing355;ing356;ing357;ing358;ing359;ing360;ing361;ing362;ing363;ing364;ing365;ing366;ing367;ing368;ing369;ing370;ing371;ing372;ing373;ing374;ing375;ing376;ing377;ing378;ing379;ing380;ing381;ing382;ing383;ing384;ing385;ing386;ing387;ing388;ing389;ing390;ing391;ing392;ing393;ing394;ing395;ing396;ing397;ing398;ing399;ing400;ing401;ing402;ing403;ing404;ing405;ing406;ing407;ing408;ing409;ing410;ing411;ing412;ing413;ing414;ing415;ing416;ing417;ing418;ing419;ing420;ing421;ing422;ing423;ing424;ing425;ing426;ing427;ing428;ing429;ing430;ing431;ing432;ing433;ing434;ing435;ing436;ing437;ing438;ing439;ing440;ing441;ing442;ing443;ing444;ing445;ing446;ing447;ing448;ing449;ing450;ing451;ing452;ing453;ing454;ing455;ing456;ing457;ing458;ing459;ing460;ing461;ing462;ing463;ing464;ing465;ing466;ing467;ing468;ing469;ing470;ing471;ing472;ing473;ing474;ing475;ing476;ing477;ing478;ing479;ing480;ing481;ing482;ing483;ing484;ing485;ing486;ing487;ing488;ing489;ing490;ing491;ing492;ing493;ing494;ing495;ing496;ing497;ing498;ing499;ing500;ing501;ing502;ing503;ing504;ing505;ing506;ing507;ing508;ing509;ing510;ing511;ing512;ing513;ing514;ing515;ing516;ing517;ing518;ing519;ing520;ing521;ing522;ing523;ing524;ing525;ing526;ing527;ing528;ing529;ing530;ing531;ing532;ing533;ing534;ing535;ing536;ing537;ing538;ing539;ing540;ing541;ing542;ing543;ing544;ing545;ing546;ing547;ing548;ing549;ing550;ing551;ing552;ing553;ing554;ing555;ing556;ing557;ing558;ing559;ing560;ing561;ing562;ing563;ing564;ing565;ing566;ing567;ing568;ing569;ing570;ing571;ing572;ing573;ing574;ing575;ing576;ing577;ing578;ing579;ing580;ing581;ing582;ing583;ing584;ing585;ing586;ing587;ing588;ing589;ing590;ing591;ing592;ing593;ing594;ing595;ing596;ing597;ing598;ing599;ing600;ing601;ing602;ing603;ing604;ing605;ing606;ing607;ing608;ing609;ing610;ing611;ing612;ing613;ing614;ing615;ing616;ing617;ing618;ing619;ing620;ing621;ing622;ing623;ing624;ing625;ing626;ing627;ing628;ing629;ing630;ing631;ing632;ing633;ing634;ing635;ing636;ing637;ing638;ing639;ing640;ing641;ing642;ing643;ing644;ing645;ing646;ing647;ing648;ing649;ing650;ing651;ing652;ing653;ing654;ing655;ing656;ing657;ing658;ing659;ing660;ing661;ing662;ing663;ing664;ing665;ing666;ing667;ing668;ing669;ing670;ing671;ing672;ing673;ing674;ing675;ing676;ing677;ing678;ing679;ing680;ing681;ing682;ing683;ing684;ing685;ing686;ing687;ing688;ing689;ing690;ing691;ing692;ing693;ing694;ing695;ing696;ing697;ing698;ing699;ing700;ing701;ing702;ing703;ing704;ing705;ing706;ing707;ing708;ing709;ing710;ing711;ing712;ing713;ing714;ing715;ing716;ing717;ing718;ing719;ing720;ing721;ing722;ing723;ing724;ing725;ing726;ing727;ing728;ing729;ing730;ing731;ing732;ing733;ing734;ing735;ing736;ing737;ing738;ing739;ing740;ing741;ing742;ing743;ing744;ing745;ing746;ing747;ing748;ing749;ing750;ing751;ing752;ing753;ing754;ing755;ing756;ing757;ing758;ing759;ing760;ing761;ing762;ing763;ing764;ing765;ing766;ing767;ing768;ing769;ing770;ing771;ing772;ing773;ing774;ing775;ing776;ing777;ing778;ing779;ing780;ing781;ing782;ing783;ing784;ing785;ing786;ing787;ing788;ing789;ing790;ing791;ing792;ing793;ing794;ing795;ing796;ing797;ing798;ing799;ing800;ing801;ing802;ing803;ing804;ing805;ing806;ing807;ing808;ing809;ing810;ing811;ing812;ing813;ing814;ing815;ing816;ing817;ing818;ing819;ing820;ing821;ing822;ing823;ing824;ing825;ing826;ing827;ing828;ing829;ing830;ing831;ing832;ing833;ing834;ing835;ing836;ing837;ing838;ing839;ing840;ing841;ing842;ing843;ing844;ing845;ing846;ing847;ing848;ing849;ing850;ing851;ing852;ing853;ing854;ing855;ing856;ing857;ing858;ing859;ing860;ing861;ing862;ing863;ing864;ing865;ing866;ing867;ing868;ing869;ing870;ing871;ing872;ing873;ing874;ing875;ing876;ing877;ing878;ing879;ing880;ing881;ing882;ing883;ing884;ing885;ing886;ing887;ing888;ing889;ing890;ing891;ing892;ing893;ing894;ing895;ing896;ing897;ing898;ing899;ing900;ing901;ing902;ing903;ing904;ing905;ing906;ing907;ing908;ing909;ing910;ing911;ing912;ing913;ing914;ing915;ing916;ing917;ing918;ing919;ing920;ing921;ing922;ing923;ing924;ing925;ing926;ing927;ing928;ing929;ing930;ing931;ing932;ing933;ing934;ing935;ing936;ing937;ing938;ing939;ing940;ing941;ing942;ing943;ing944;ing945;ing946;ing947;ing948;ing949;ing950;ing951;ing952;ing953;ing954;ing955;ing956;ing957;ing958;ing959;ing960;ing961;ing962;ing963;ing964;ing965;ing966;ing967;ing968;ing969;ing970;ing971;ing972;ing973;ing974;ing975;ing976;ing977;ing978;ing979;ing980;ing981;ing982;ing983;ing984;ing985;ing986;ing987;ing988;ing989;ing990;ing991;ing992;ing993;ing994;ing995;ing996;ing997;ing998;ing999
+start;string0;string1;string2;string3;string4;string5;string6;string7;string8;string9;string10;string11;string12;string13;string14;string15;string16;string17;string18;string19;string20;string21;string22;string23;string24;string25;string26;string27;string28;string29;string30;string31;string32;string33;string34;string35;string36;string37;string38;string39;string40;string41;string42;string43;string44;string45;string46;string47;string48;string49;string50;string51;string52;string53;string54;string55;string56;string57;string58;string59;string60;string61;string62;string63;string64;string65;string66;string67;string68;string69;string70;string71;string72;string73;string74;string75;string76;string77;string78;string79;string80;string81;string82;string83;string84;string85;string86;string87;string88;string89;string90;string91;string92;string93;string94;string95;string96;string97;string98;string99;string100;string101;string102;string103;string104;string105;string106;string107;string108;string109;string110;string111;string112;string113;string114;string115;string116;string117;string118;string119;string120;string121;string122;string123;string124;string125;string126;string127;string128;string129;string130;string131;string132;string133;string134;string135;string136;string137;string138;string139;string140;string141;string142;string143;string144;string145;string146;string147;string148;string149;string150;string151;string152;string153;string154;string155;string156;string157;string158;string159;string160;string161;string162;string163;string164;string165;string166;string167;string168;string169;string170;string171;string172;string173;string174;string175;string176;string177;string178;string179;string180;string181;string182;string183;string184;string185;string186;string187;string188;string189;string190;string191;string192;string193;string194;string195;string196;string197;string198;string199;string200;string201;string202;string203;string204;string205;string206;string207;string208;string209;string210;string211;string212;string213;string214;string215;string216;string217;string218;string219;string220;string221;string222;string223;string224;string225;string226;string227;string228;string229;string230;string231;string232;string233;string234;string235;string236;string237;string238;string239;string240;string241;string242;string243;string244;string245;string246;string247;string248;string249;string250;string251;string252;string253;string254;string255;string256;string257;string258;string259;string260;string261;string262;string263;string264;string265;string266;string267;string268;string269;string270;string271;string272;string273;string274;string275;string276;string277;string278;string279;string280;string281;string282;string283;string284;string285;string286;string287;string288;string289;string290;string291;string292;string293;string294;string295;string296;string297;string298;string299;string300;string301;string302;string303;string304;string305;string306;string307;string308;string309;string310;string311;string312;string313;string314;string315;string316;string317;string318;string319;string320;string321;string322;string323;string324;string325;string326;string327;string328;string329;string330;string331;string332;string333;string334;string335;string336;string337;string338;string339;string340;string341;string342;string343;string344;string345;string346;string347;string348;string349;string350;string351;string352;string353;string354;string355;string356;string357;string358;string359;string360;string361;string362;string363;string364;string365;string366;string367;string368;string369;string370;string371;string372;string373;string374;string375;string376;string377;string378;string379;string380;string381;string382;string383;string384;string385;string386;string387;string388;string389;string390;string391;string392;string393;string394;string395;string396;string397;string398;string399;string400;string401;string402;string403;string404;string405;string406;string407;string408;string409;string410;string411;string412;string413;string414;string415;string416;string417;string418;string419;string420;string421;string422;string423;string424;string425;string426;string427;string428;string429;string430;string431;string432;string433;string434;string435;string436;string437;string438;string439;string440;string441;string442;string443;string444;string445;string446;string447;string448;string449;string450;string451;string452;string453;string454;string455;string456;string457;string458;string459;string460;string461;string462;string463;string464;string465;string466;string467;string468;string469;string470;string471;string472;string473;string474;string475;string476;string477;string478;string479;string480;string481;string482;string483;string484;string485;string486;string487;string488;string489;string490;string491;string492;string493;string494;string495;string496;string497;string498;string499;string500;string501;string502;string503;string504;string505;string506;string507;string508;string509;string510;string511;string512;string513;string514;string515;string516;string517;string518;string519;string520;string521;string522;string523;string524;string525;string526;string527;string528;string529;string530;string531;string532;string533;string534;string535;string536;string537;string538;string539;string540;string541;string542;string543;string544;string545;string546;string547;string548;string549;string550;string551;string552;string553;string554;string555;string556;string557;string558;string559;string560;string561;string562;string563;string564;string565;string566;string567;string568;string569;string570;string571;string572;string573;string574;string575;string576;string577;string578;string579;string580;string581;string582;string583;string584;string585;string586;string587;string588;string589;string590;string591;string592;string593;string594;string595;string596;string597;string598;string599;string600;string601;string602;string603;string604;string605;string606;string607;string608;string609;string610;string611;string612;string613;string614;string615;string616;string617;string618;string619;string620;string621;string622;string623;string624;string625;string626;string627;string628;string629;string630;string631;string632;string633;string634;string635;string636;string637;string638;string639;string640;string641;string642;string643;string644;string645;string646;string647;string648;string649;string650;string651;string652;string653;string654;string655;string656;string657;string658;string659;string660;string661;string662;string663;string664;string665;string666;string667;string668;string669;string670;string671;string672;string673;string674;string675;string676;string677;string678;string679;string680;string681;string682;string683;string684;string685;string686;string687;string688;string689;string690;string691;string692;string693;string694;string695;string696;string697;string698;string699;string700;string701;string702;string703;string704;string705;string706;string707;string708;string709;string710;string711;string712;string713;string714;string715;string716;string717;string718;string719;string720;string721;string722;string723;string724;string725;string726;string727;string728;string729;string730;string731;string732;string733;string734;string735;string736;string737;string738;string739;string740;string741;string742;string743;string744;string745;string746;string747;string748;string749;string750;string751;string752;string753;string754;string755;string756;string757;string758;string759;string760;string761;string762;string763;string764;string765;string766;string767;string768;string769;string770;string771;string772;string773;string774;string775;string776;string777;string778;string779;string780;string781;string782;string783;string784;string785;string786;string787;string788;string789;string790;string791;string792;string793;string794;string795;string796;string797;string798;string799;string800;string801;string802;string803;string804;string805;string806;string807;string808;string809;string810;string811;string812;string813;string814;string815;string816;string817;string818;string819;string820;string821;string822;string823;string824;string825;string826;string827;string828;string829;string830;string831;string832;string833;string834;string835;string836;string837;string838;string839;string840;string841;string842;string843;string844;string845;string846;string847;string848;string849;string850;string851;string852;string853;string854;string855;string856;string857;string858;string859;string860;string861;string862;string863;string864;string865;string866;string867;string868;string869;string870;string871;string872;string873;string874;string875;string876;string877;string878;string879;string880;string881;string882;string883;string884;string885;string886;string887;string888;string889;string890;string891;string892;string893;string894;string895;string896;string897;string898;string899;string900;string901;string902;string903;string904;string905;string906;string907;string908;string909;string910;string911;string912;string913;string914;string915;string916;string917;string918;string919;string920;string921;string922;string923;string924;string925;string926;string927;string928;string929;string930;string931;string932;string933;string934;string935;string936;string937;string938;string939;string940;string941;string942;string943;string944;string945;string946;string947;string948;string949;string950;string951;string952;string953;string954;string955;string956;string957;string958;string959;string960;string961;string962;string963;string964;string965;string966;string967;string968;string969;string970;string971;string972;string973;string974;string975;string976;string977;string978;string979;string980;string981;string982;string983;string984;string985;string986;string987;string988;string989;string990;string991;string992;string993;string994;string995;string996;string997;string998;string999
+start;string0;string1;string2;string3;string4;string5;string6;string7;string8;string9;string10;string11;string12;string13;string14;string15;string16;string17;string18;string19;string20;string21;string22;string23;string24;string25;string26;string27;string28;string29;string30;string31;string32;string33;string34;string35;string36;string37;string38;string39;string40;string41;string42;string43;string44;string45;string46;string47;string48;string49;string50;string51;string52;string53;string54;string55;string56;string57;string58;string59;string60;string61;string62;string63;string64;string65;string66;string67;string68;string69;string70;string71;string72;string73;string74;string75;string76;string77;string78;string79;string80;string81;string82;string83;string84;string85;string86;string87;string88;string89;string90;string91;string92;string93;string94;string95;string96;string97;string98;string99;string100;string101;string102;string103;string104;string105;string106;string107;string108;string109;string110;string111;string112;string113;string114;string115;string116;string117;string118;string119;string120;string121;string122;string123;string124;string125;string126;string127;string128;string129;string130;string131;string132;string133;string134;string135;string136;string137;string138;string139;string140;string141;string142;string143;string144;string145;string146;string147;string148;string149;string150;string151;string152;string153;string154;string155;string156;string157;string158;string159;string160;string161;string162;string163;string164;string165;string166;string167;string168;string169;string170;string171;string172;string173;string174;string175;string176;string177;string178;string179;string180;string181;string182;string183;string184;string185;string186;string187;string188;string189;string190;string191;string192;string193;string194;string195;string196;string197;string198;string199;string200;string201;string202;string203;string204;string205;string206;string207;string208;string209;string210;string211;string212;string213;string214;string215;string216;string217;string218;string219;string220;string221;string222;string223;string224;string225;string226;string227;string228;string229;string230;string231;string232;string233;string234;string235;string236;string237;string238;string239;string240;string241;string242;string243;string244;string245;string246;string247;string248;string249;string250;string251;string252;string253;string254;string255;string256;string257;string258;string259;string260;string261;string262;string263;string264;string265;string266;string267;string268;string269;string270;string271;string272;string273;string274;string275;string276;string277;string278;string279;string280;string281;string282;string283;string284;string285;string286;string287;string288;string289;string290;string291;string292;string293;string294;string295;string296;string297;string298;string299;string300;string301;string302;string303;string304;string305;string306;string307;string308;string309;string310;string311;string312;string313;string314;string315;string316;string317;string318;string319;string320;string321;string322;string323;string324;string325;string326;string327;string328;string329;string330;string331;string332;string333;string334;string335;string336;string337;string338;string339;string340;string341;string342;string343;string344;string345;string346;string347;string348;string349;string350;string351;string352;string353;string354;string355;string356;string357;string358;string359;string360;string361;string362;string363;string364;string365;string366;string367;string368;string369;string370;string371;string372;string373;string374;string375;string376;string377;string378;string379;string380;string381;string382;string383;string384;string385;string386;string387;string388;string389;string390;string391;string392;string393;string394;string395;string396;string397;string398;string399;string400;string401;string402;string403;string404;string405;string406;string407;string408;string409;string410;string411;string412;string413;string414;string415;string416;string417;string418;string419;string420;string421;string422;string423;string424;string425;string426;string427;string428;string429;string430;string431;string432;string433;string434;string435;string436;string437;string438;string439;string440;string441;string442;string443;string444;string445;string446;string447;string448;string449;string450;string451;string452;string453;string454;string455;string456;string457;string458;string459;string460;string461;string462;string463;string464;string465;string466;string467;string468;string469;string470;string471;string472;string473;string474;string475;string476;string477;string478;string479;string480;string481;string482;string483;string484;string485;string486;string487;string488;string489;string490;string491;string492;string493;string494;string495;string496;string497;string498;string499;string500;string501;string502;string503;string504;string505;string506;string507;string508;string509;string510;string511;string512;string513;string514;string515;string516;string517;string518;string519;string520;string521;string522;string523;string524;string525;string526;string527;string528;string529;string530;string531;string532;string533;string534;string535;string536;string537;string538;string539;string540;string541;string542;string543;string544;string545;string546;string547;string548;string549;string550;string551;string552;string553;string554;string555;string556;string557;string558;string559;string560;string561;string562;string563;string564;string565;string566;string567;string568;string569;string570;string571;string572;string573;string574;string575;string576;string577;string578;string579;string580;string581;string582;string583;string584;string585;string586;string587;string588;string589;string590;string591;string592;string593;string594;string595;string596;string597;string598;string599;string600;string601;string602;string603;string604;string605;string606;string607;string608;string609;string610;string611;string612;string613;string614;string615;string616;string617;string618;string619;string620;string621;string622;string623;string624;string625;string626;string627;string628;string629;string630;string631;string632;string633;string634;string635;string636;string637;string638;string639;string640;string641;string642;string643;string644;string645;string646;string647;string648;string649;string650;string651;string652;string653;string654;string655;string656;string657;string658;string659;string660;string661;string662;string663;string664;string665;string666;string667;string668;string669;string670;string671;string672;string673;string674;string675;string676;string677;string678;string679;string680;string681;string682;string683;string684;string685;string686;string687;string688;string689;string690;string691;string692;string693;string694;string695;string696;string697;string698;string699;string700;string701;string702;string703;string704;string705;string706;string707;string708;string709;string710;string711;string712;string713;string714;string715;string716;string717;string718;string719;string720;string721;string722;string723;string724;string725;string726;string727;string728;string729;string730;string731;string732;string733;string734;string735;string736;string737;string738;string739;string740;string741;string742;string743;string744;string745;string746;string747;string748;string749;string750;string751;string752;string753;string754;string755;string756;string757;string758;string759;string760;string761;string762;string763;string764;string765;string766;string767;string768;string769;string770;string771;string772;string773;string774;string775;string776;string777;string778;string779;string780;string781;string782;string783;string784;string785;string786;string787;string788;string789;string790;string791;string792;string793;string794;string795;string796;string797;string798;string799;string800;string801;string802;string803;string804;string805;string806;string807;string808;string809;string810;string811;string812;string813;string814;string815;string816;string817;string818;string819;string820;string821;string822;string823;string824;string825;string826;string827;string828;string829;string830;string831;string832;string833;string834;string835;string836;string837;string838;string839;string840;string841;string842;string843;string844;string845;string846;string847;string848;string849;string850;string851;string852;string853;string854;string855;string856;string857;string858;string859;string860;string861;string862;string863;string864;string865;string866;string867;string868;string869;string870;string871;string872;string873;string874;string875;string876;string877;string878;string879;string880;string881;string882;string883;string884;string885;string886;string887;string888;string889;string890;string891;string892;string893;string894;string895;string896;string897;string898;string899;string900;string901;string902;string903;string904;string905;string906;string907;string908;string909;string910;string911;string912;string913;string914;string915;string916;string917;string918;string919;string920;string921;string922;string923;string924;string925;string926;string927;string928;string929;string930;string931;string932;string933;string934;string935;string936;string937;string938;string939;string940;string941;string942;string943;string944;string945;string946;string947;string948;string949;string950;string951;string952;string953;string954;string955;string956;string957;string958;string959;string960;string961;string962;string963;string964;string965;string966;string967;string968;string969;string970;string971;string972;string973;string974;string975;string976;string977;string978;string979;string980;string981;string982;string983;string984;string985;string986;string987;string988;string989;string990;string991;string992;string993;string994;string995;string996;string997;string998;string999
+ing999
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+art;string0;string1;string2;string3;string4;string5;string6;string7;string8;string9;string10;string11;string12;string13;string14;string15;string16;string17;string18;string19;string20;string21;string22;string23;string24;string25;string26;string27;string28;string29;string30;string31;string32;string33;string34;string35;string36;string37;string38;string39;string40;string41;string42;string43;string44;string45;string46;string47;string48;string49;string50;string51;string52;string53;string54;string55;string56;string57;string58;string59;string60;string61;string62;string63;string64;string65;string66;string67;string68;string69;string70;string71;string72;string73;string74;string75;string76;string77;string78;string79;string80;string81;string82;string83;string84;string85;string86;string87;string88;string89;string90;string91;string92;string93;string94;string95;string96;string97;string98;string99;string100;string101;string102;string103;string104;string105;string106;string107;string108;string109;string110;string111;string112;string113;string114;string115;string116;string117;string118;string119;string120;string121;string122;string123;string124;string125;string126;string127;string128;string129;string130;string131;string132;string133;string134;string135;string136;string137;string138;string139;string140;string141;string142;string143;string144;string145;string146;string147;string148;string149;string150;string151;string152;string153;string154;string155;string156;string157;string158;string159;string160;string161;string162;string163;string164;string165;string166;string167;string168;string169;string170;string171;string172;string173;string174;string175;string176;string177;string178;string179;string180;string181;string182;string183;string184;string185;string186;string187;string188;string189;string190;string191;string192;string193;string194;string195;string196;string197;string198;string199;string200;string201;string202;string203;string204;string205;string206;string207;string208;string209;string210;string211;string212;string213;string214;string215;string216;string217;string218;string219;string220;string221;string222;string223;string224;string225;string226;string227;string228;string229;string230;string231;string232;string233;string234;string235;string236;string237;string238;string239;string240;string241;string242;string243;string244;string245;string246;string247;string248;string249;string250;string251;string252;string253;string254;string255;string256;string257;string258;string259;string260;string261;string262;string263;string264;string265;string266;string267;string268;string269;string270;string271;string272;string273;string274;string275;string276;string277;string278;string279;string280;string281;string282;string283;string284;string285;string286;string287;string288;string289;string290;string291;string292;string293;string294;string295;string296;string297;string298;string299;string300;string301;string302;string303;string304;string305;string306;string307;string308;string309;string310;string311;string312;string313;string314;string315;string316;string317;string318;string319;string320;string321;string322;string323;string324;string325;string326;string327;string328;string329;string330;string331;string332;string333;string334;string335;string336;string337;string338;string339;string340;string341;string342;string343;string344;string345;string346;string347;string348;string349;string350;string351;string352;string353;string354;string355;string356;string357;string358;string359;string360;string361;string362;string363;string364;string365;string366;string367;string368;string369;string370;string371;string372;string373;string374;string375;string376;string377;string378;string379;string380;string381;string382;string383;string384;string385;string386;string387;string388;string389;string390;string391;string392;string393;string394;string395;string396;string397;string398;string399;string400;string401;string402;string403;string404;string405;string406;string407;string408;string409;string410;string411;string412;string413;string414;string415;string416;string417;string418;string419;string420;string421;string422;string423;string424;string425;string426;string427;string428;string429;string430;string431;string432;string433;string434;string435;string436;string437;string438;string439;string440;string441;string442;string443;string444;string445;string446;string447;string448;string449;string450;string451;string452;string453;string454;string455;string456;string457;string458;string459;string460;string461;string462;string463;string464;string465;string466;string467;string468;string469;string470;string471;string472;string473;string474;string475;string476;string477;string478;string479;string480;string481;string482;string483;string484;string485;string486;string487;string488;string489;string490;string491;string492;string493;string494;string495;string496;string497;string498;string499;string500;string501;string502;string503;string504;string505;string506;string507;string508;string509;string510;string511;string512;string513;string514;string515;string516;string517;string518;string519;string520;string521;string522;string523;string524;string525;string526;string527;string528;string529;string530;string531;string532;string533;string534;string535;string536;string537;string538;string539;string540;string541;string542;string543;string544;string545;string546;string547;string548;string549;string550;string551;string552;string553;string554;string555;string556;string557;string558;string559;string560;string561;string562;string563;string564;string565;string566;string567;string568;string569;string570;string571;string572;string573;string574;string575;string576;string577;string578;string579;string580;string581;string582;string583;string584;string585;string586;string587;string588;string589;string590;string591;string592;string593;string594;string595;string596;string597;string598;string599;string600;string601;string602;string603;string604;string605;string606;string607;string608;string609;string610;string611;string612;string613;string614;string615;string616;string617;string618;string619;string620;string621;string622;string623;string624;string625;string626;string627;string628;string629;string630;string631;string632;string633;string634;string635;string636;string637;string638;string639;string640;string641;string642;string643;string644;string645;string646;string647;string648;string649;string650;string651;string652;string653;string654;string655;string656;string657;string658;string659;string660;string661;string662;string663;string664;string665;string666;string667;string668;string669;string670;string671;string672;string673;string674;string675;string676;string677;string678;string679;string680;string681;string682;string683;string684;string685;string686;string687;string688;string689;string690;string691;string692;string693;string694;string695;string696;string697;string698;string699;string700;string701;string702;string703;string704;string705;string706;string707;string708;string709;string710;string711;string712;string713;string714;string715;string716;string717;string718;string719;string720;string721;string722;string723;string724;string725;string726;string727;string728;string729;string730;string731;string732;string733;string734;string735;string736;string737;string738;string739;string740;string741;string742;string743;string744;string745;string746;string747;string748;string749;string750;string751;string752;string753;string754;string755;string756;string757;string758;string759;string760;string761;string762;string763;string764;string765;string766;string767;string768;string769;string770;string771;string772;string773;string774;string775;string776;string777;string778;string779;string780;string781;string782;string783;string784;string785;string786;string787;string788;string789;string790;string791;string792;string793;string794;string795;string796;string797;string798;string799;string800;string801;string802;string803;string804;string805;string806;string807;string808;string809;string810;string811;string812;string813;string814;string815;string816;string817;string818;string819;string820;string821;string822;string823;string824;string825;string826;string827;string828;string829;string830;string831;string832;string833;string834;string835;string836;string837;string838;string839;string840;string841;string842;string843;string844;string845;string846;string847;string848;string849;string850;string851;string852;string853;string854;string855;string856;string857;string858;string859;string860;string861;string862;string863;string864;string865;string866;string867;string868;string869;string870;string871;string872;string873;string874;string875;string876;string877;string878;string879;string880;string881;string882;string883;string884;string885;string886;string887;string888;string889;string890;string891;string892;string893;string894;string895;string896;string897;string898;string899;string900;string901;string902;string903;string904;string905;string906;string907;string908;string909;string910;string911;string912;string913;string914;string915;string916;string917;string918;string919;string920;string921;string922;string923;string924;string925;string926;string927;string928;string929;string930;string931;string932;string933;string934;string935;string936;string937;string938;string939;string940;string941;string942;string943;string944;string945;string946;string947;string948;string949;string950;string951;string952;string953;string954;string955;string956;string957;string958;string959;string960;string961;string962;string963;string964;string965;string966;string967;string968;string969;string970;string971;string972;string973;string974;string975;string976;string977;string978;string979;string980;string981;string982;string983;string984;string985;string986;string987;string988;string989;string990;string991;string992;string993;string994;string995;string996;string997;string998;string999
+start;string0;string1;string2;string3;string4;string5;string6;string7;string8;string9;string10;string11;string12;string13;string14;string15;string16;string17;string18;string19;string20;string21;string22;string23;string24;string25;string26;string27;string28;string29;string30;string31;string32;string33;string34;string35;string36;string37;string38;string39;string40;string41;string42;string43;string44;string45;string46;string47;string48;string49;string50;string51;string52;string53;string54;string55;string56;string57;string58;string59;string60;string61;string62;string63;string64;string65;string66;string67;string68;string69;string70;string71;string72;string73;string74;string75;string76;string77;string78;string79;string80;string81;string82;string83;string84;string85;string86;string87;string88;string89;string90;string91;string92;string93;string94;string95;string96;string97;string98;string99;string100;string101;string102;string103;string104;string105;string106;string107;string108;string109;string110;string111;string112;string113;string114;string115;string116;string117;string118;string119;string120;string121;string122;string123;string124;string125;string126;string127;string128;string129;string130;string131;string132;string133;string134;string135;string136;string137;string138;string139;string140;string141;string142;string143;string144;string145;string146;string147;string148;string149;string150;string151;string152;string153;string154;string155;string156;string157;string158;string159;string160;string161;string162;string163;string164;string165;string166;string167;string168;string169;string170;string171;string172;string173;string174;string175;string176;string177;string178;string179;string180;string181;string182;string183;string184;string185;string186;string187;string188;string189;string190;string191;string192;string193;string194;string195;string196;string197;string198;string199;string200;string201;string202;string203;string204;string205;string206;string207;string208;string209;string210;string211;string212;string213;string214;string215;string216;string217;string218;string219;string220;string221;string222;string223;string224;string225;string226;string227;string228;string229;string230;string231;string232;string233;string234;string235;string236;string237;string238;string239;string240;string241;string242;string243;string244;string245;string246;string247;string248;string249;string250;string251;string252;string253;string254;string255;string256;string257;string258;string259;string260;string261;string262;string263;string264;string265;string266;string267;string268;string269;string270;string271;string272;string273;string274;string275;string276;string277;string278;string279;string280;string281;string282;string283;string284;string285;string286;string287;string288;string289;string290;string291;string292;string293;string294;string295;string296;string297;string298;string299;string300;string301;string302;string303;string304;string305;string306;string307;string308;string309;string310;string311;string312;string313;string314;string315;string316;string317;string318;string319;string320;string321;string322;string323;string324;string325;string326;string327;string328;string329;string330;string331;string332;string333;string334;string335;string336;string337;string338;string339;string340;string341;string342;string343;string344;string345;string346;string347;string348;string349;string350;string351;string352;string353;string354;string355;string356;string357;string358;string359;string360;string361;string362;string363;string364;string365;string366;string367;string368;string369;string370;string371;string372;string373;string374;string375;string376;string377;string378;string379;string380;string381;string382;string383;string384;string385;string386;string387;string388;string389;string390;string391;string392;string393;string394;string395;string396;string397;string398;string399;string400;string401;string402;string403;string404;string405;string406;string407;string408;string409;string410;string411;string412;string413;string414;string415;string416;string417;string418;string419;string420;string421;string422;string423;string424;string425;string426;string427;string428;string429;string430;string431;string432;string433;string434;string435;string436;string437;string438;string439;string440;string441;string442;string443;string444;string445;string446;string447;string448;string449;string450;string451;string452;string453;string454;string455;string456;string457;string458;string459;string460;string461;string462;string463;string464;string465;string466;string467;string468;string469;string470;string471;string472;string473;string474;string475;string476;string477;string478;string479;string480;string481;string482;string483;string484;string485;string486;string487;string488;string489;string490;string491;string492;string493;string494;string495;string496;string497;string498;string499;string500;string501;string502;string503;string504;string505;string506;string507;string508;string509;string510;string511;string512;string513;string514;string515;string516;string517;string518;string519;string520;string521;string522;string523;string524;string525;string526;string527;string528;string529;string530;string531;string532;string533;string534;string535;string536;string537;string538;string539;string540;string541;string542;string543;string544;string545;string546;string547;string548;string549;string550;string551;string552;string553;string554;string555;string556;string557;string558;string559;string560;string561;string562;string563;string564;string565;string566;string567;string568;string569;string570;string571;string572;string573;string574;string575;string576;string577;string578;string579;string580;string581;string582;string583;string584;string585;string586;string587;string588;string589;string590;string591;string592;string593;string594;string595;string596;string597;string598;string599;string600;string601;string602;string603;string604;string605;string606;string607;string608;string609;string610;string611;string612;string613;string614;string615;string616;string617;string618;string619;string620;string621;string622;string623;string624;string625;string626;string627;string628;string629;string630;string631;string632;string633;string634;string635;string636;string637;string638;string639;string640;string641;string642;string643;string644;string645;string646;string647;string648;string649;string650;string651;string652;string653;string654;string655;string656;string657;string658;string659;string660;string661;string662;string663;string664;string665;string666;string667;string668;string669;string670;string671;string672;string673;string674;string675;string676;string677;string678;string679;string680;string681;string682;string683;string684;string685;string686;string687;string688;string689;string690;string691;string692;string693;string694;string695;string696;string697;string698;string699;string700;string701;string702;string703;string704;string705;string706;string707;string708;string709;string710;string711;string712;string713;string714;string715;string716;string717;string718;string719;string720;string721;string722;string723;string724;string725;string726;string727;string728;string729;string730;string731;string732;string733;string734;string735;string736;string737;string738;string739;string740;string741;string742;string743;string744;string745;string746;string747;string748;string749;string750;string751;string752;string753;string754;string755;string756;string757;string758;string759;string760;string761;string762;string763;string764;string765;string766;string767;string768;string769;string770;string771;string772;string773;string774;string775;string776;string777;string778;string779;string780;string781;string782;string783;string784;string785;string786;string787;string788;string789;string790;string791;string792;string793;string794;string795;string796;string797;string798;string799;string800;string801;string802;string803;string804;string805;string806;string807;string808;string809;string810;string811;string812;string813;string814;string815;string816;string817;string818;string819;string820;string821;string822;string823;string824;string825;string826;string827;string828;string829;string830;string831;string832;string833;string834;string835;string836;string837;string838;string839;string840;string841;string842;string843;string844;string845;string846;string847;string848;string849;string850;string851;string852;string853;string854;string855;string856;string857;string858;string859;string860;string861;string862;string863;string864;string865;string866;string867;string868;string869;string870;string871;string872;string873;string874;string875;string876;string877;string878;string879;string880;string881;string882;string883;string884;string885;string886;string887;string888;string889;string890;string891;string892;string893;string894;string895;string896;string897;string898;string899;string900;string901;string902;string903;string904;string905;string906;string907;string908;string909;string910;string911;string912;string913;string914;string915;string916;string917;string918;string919;string920;string921;string922;string923;string924;string925;string926;string927;string928;string929;string930;string931;string932;string933;string934;string935;string936;string937;string938;string939;string940;string941;string942;string943;string944;string945;string946;string947;string948;string949;string950;string951;string952;string953;string954;string955;string956;string957;string958;string959;string960;string961;string962;string963;string964;string965;string966;string967;string968;string969;string970;string971;string972;string973;string974;string975;string976;string977;string978;string979;string980;string981;string982;string983;string984;string985;string986;string987;string988;string989;string990;string991;string992;string993;string994;string995;string996;string997;string998;string9
+start;ing0;ing1;ing2;ing3;ing4;ing5;ing6;ing7;ing8;ing9;ing10;ing11;ing12;ing13;ing14;ing15;ing16;ing17;ing18;ing19;ing20;ing21;ing22;ing23;ing24;ing25;ing26;ing27;ing28;ing29;ing30;ing31;ing32;ing33;ing34;ing35;ing36;ing37;ing38;ing39;ing40;ing41;ing42;ing43;ing44;ing45;ing46;ing47;ing48;ing49;ing50;ing51;ing52;ing53;ing54;ing55;ing56;ing57;ing58;ing59;ing60;ing61;ing62;ing63;ing64;ing65;ing66;ing67;ing68;ing69;ing70;ing71;ing72;ing73;ing74;ing75;ing76;ing77;ing78;ing79;ing80;ing81;ing82;ing83;ing84;ing85;ing86;ing87;ing88;ing89;ing90;ing91;ing92;ing93;ing94;ing95;ing96;ing97;ing98;ing99;ing100;ing101;ing102;ing103;ing104;ing105;ing106;ing107;ing108;ing109;ing110;ing111;ing112;ing113;ing114;ing115;ing116;ing117;ing118;ing119;ing120;ing121;ing122;ing123;ing124;ing125;ing126;ing127;ing128;ing129;ing130;ing131;ing132;ing133;ing134;ing135;ing136;ing137;ing138;ing139;ing140;ing141;ing142;ing143;ing144;ing145;ing146;ing147;ing148;ing149;ing150;ing151;ing152;ing153;ing154;ing155;ing156;ing157;ing158;ing159;ing160;ing161;ing162;ing163;ing164;ing165;ing166;ing167;ing168;ing169;ing170;ing171;ing172;ing173;ing174;ing175;ing176;ing177;ing178;ing179;ing180;ing181;ing182;ing183;ing184;ing185;ing186;ing187;ing188;ing189;ing190;ing191;ing192;ing193;ing194;ing195;ing196;ing197;ing198;ing199;ing200;ing201;ing202;ing203;ing204;ing205;ing206;ing207;ing208;ing209;ing210;ing211;ing212;ing213;ing214;ing215;ing216;ing217;ing218;ing219;ing220;ing221;ing222;ing223;ing224;ing225;ing226;ing227;ing228;ing229;ing230;ing231;ing232;ing233;ing234;ing235;ing236;ing237;ing238;ing239;ing240;ing241;ing242;ing243;ing244;ing245;ing246;ing247;ing248;ing249;ing250;ing251;ing252;ing253;ing254;ing255;ing256;ing257;ing258;ing259;ing260;ing261;ing262;ing263;ing264;ing265;ing266;ing267;ing268;ing269;ing270;ing271;ing272;ing273;ing274;ing275;ing276;ing277;ing278;ing279;ing280;ing281;ing282;ing283;ing284;ing285;ing286;ing287;ing288;ing289;ing290;ing291;ing292;ing293;ing294;ing295;ing296;ing297;ing298;ing299;ing300;ing301;ing302;ing303;ing304;ing305;ing306;ing307;ing308;ing309;ing310;ing311;ing312;ing313;ing314;ing315;ing316;ing317;ing318;ing319;ing320;ing321;ing322;ing323;ing324;ing325;ing326;ing327;ing328;ing329;ing330;ing331;ing332;ing333;ing334;ing335;ing336;ing337;ing338;ing339;ing340;ing341;ing342;ing343;ing344;ing345;ing346;ing347;ing348;ing349;ing350;ing351;ing352;ing353;ing354;ing355;ing356;ing357;ing358;ing359;ing360;ing361;ing362;ing363;ing364;ing365;ing366;ing367;ing368;ing369;ing370;ing371;ing372;ing373;ing374;ing375;ing376;ing377;ing378;ing379;ing380;ing381;ing382;ing383;ing384;ing385;ing386;ing387;ing388;ing389;ing390;ing391;ing392;ing393;ing394;ing395;ing396;ing397;ing398;ing399;ing400;ing401;ing402;ing403;ing404;ing405;ing406;ing407;ing408;ing409;ing410;ing411;ing412;ing413;ing414;ing415;ing416;ing417;ing418;ing419;ing420;ing421;ing422;ing423;ing424;ing425;ing426;ing427;ing428;ing429;ing430;ing431;ing432;ing433;ing434;ing435;ing436;ing437;ing438;ing439;ing440;ing441;ing442;ing443;ing444;ing445;ing446;ing447;ing448;ing449;ing450;ing451;ing452;ing453;ing454;ing455;ing456;ing457;ing458;ing459;ing460;ing461;ing462;ing463;ing464;ing465;ing466;ing467;ing468;ing469;ing470;ing471;ing472;ing473;ing474;ing475;ing476;ing477;ing478;ing479;ing480;ing481;ing482;ing483;ing484;ing485;ing486;ing487;ing488;ing489;ing490;ing491;ing492;ing493;ing494;ing495;ing496;ing497;ing498;ing499;ing500;ing501;ing502;ing503;ing504;ing505;ing506;ing507;ing508;ing509;ing510;ing511;ing512;ing513;ing514;ing515;ing516;ing517;ing518;ing519;ing520;ing521;ing522;ing523;ing524;ing525;ing526;ing527;ing528;ing529;ing530;ing531;ing532;ing533;ing534;ing535;ing536;ing537;ing538;ing539;ing540;ing541;ing542;ing543;ing544;ing545;ing546;ing547;ing548;ing549;ing550;ing551;ing552;ing553;ing554;ing555;ing556;ing557;ing558;ing559;ing560;ing561;ing562;ing563;ing564;ing565;ing566;ing567;ing568;ing569;ing570;ing571;ing572;ing573;ing574;ing575;ing576;ing577;ing578;ing579;ing580;ing581;ing582;ing583;ing584;ing585;ing586;ing587;ing588;ing589;ing590;ing591;ing592;ing593;ing594;ing595;ing596;ing597;ing598;ing599;ing600;ing601;ing602;ing603;ing604;ing605;ing606;ing607;ing608;ing609;ing610;ing611;ing612;ing613;ing614;ing615;ing616;ing617;ing618;ing619;ing620;ing621;ing622;ing623;ing624;ing625;ing626;ing627;ing628;ing629;ing630;ing631;ing632;ing633;ing634;ing635;ing636;ing637;ing638;ing639;ing640;ing641;ing642;ing643;ing644;ing645;ing646;ing647;ing648;ing649;ing650;ing651;ing652;ing653;ing654;ing655;ing656;ing657;ing658;ing659;ing660;ing661;ing662;ing663;ing664;ing665;ing666;ing667;ing668;ing669;ing670;ing671;ing672;ing673;ing674;ing675;ing676;ing677;ing678;ing679;ing680;ing681;ing682;ing683;ing684;ing685;ing686;ing687;ing688;ing689;ing690;ing691;ing692;ing693;ing694;ing695;ing696;ing697;ing698;ing699;ing700;ing701;ing702;ing703;ing704;ing705;ing706;ing707;ing708;ing709;ing710;ing711;ing712;ing713;ing714;ing715;ing716;ing717;ing718;ing719;ing720;ing721;ing722;ing723;ing724;ing725;ing726;ing727;ing728;ing729;ing730;ing731;ing732;ing733;ing734;ing735;ing736;ing737;ing738;ing739;ing740;ing741;ing742;ing743;ing744;ing745;ing746;ing747;ing748;ing749;ing750;ing751;ing752;ing753;ing754;ing755;ing756;ing757;ing758;ing759;ing760;ing761;ing762;ing763;ing764;ing765;ing766;ing767;ing768;ing769;ing770;ing771;ing772;ing773;ing774;ing775;ing776;ing777;ing778;ing779;ing780;ing781;ing782;ing783;ing784;ing785;ing786;ing787;ing788;ing789;ing790;ing791;ing792;ing793;ing794;ing795;ing796;ing797;ing798;ing799;ing800;ing801;ing802;ing803;ing804;ing805;ing806;ing807;ing808;ing809;ing810;ing811;ing812;ing813;ing814;ing815;ing816;ing817;ing818;ing819;ing820;ing821;ing822;ing823;ing824;ing825;ing826;ing827;ing828;ing829;ing830;ing831;ing832;ing833;ing834;ing835;ing836;ing837;ing838;ing839;ing840;ing841;ing842;ing843;ing844;ing845;ing846;ing847;ing848;ing849;ing850;ing851;ing852;ing853;ing854;ing855;ing856;ing857;ing858;ing859;ing860;ing861;ing862;ing863;ing864;ing865;ing866;ing867;ing868;ing869;ing870;ing871;ing872;ing873;ing874;ing875;ing876;ing877;ing878;ing879;ing880;ing881;ing882;ing883;ing884;ing885;ing886;ing887;ing888;ing889;ing890;ing891;ing892;ing893;ing894;ing895;ing896;ing897;ing898;ing899;ing900;ing901;ing902;ing903;ing904;ing905;ing906;ing907;ing908;ing909;ing910;ing911;ing912;ing913;ing914;ing915;ing916;ing917;ing918;ing919;ing920;ing921;ing922;ing923;ing924;ing925;ing926;ing927;ing928;ing929;ing930;ing931;ing932;ing933;ing934;ing935;ing936;ing937;ing938;ing939;ing940;ing941;ing942;ing943;ing944;ing945;ing946;ing947;ing948;ing949;ing950;ing951;ing952;ing953;ing954;ing955;ing956;ing957;ing958;ing959;ing960;ing961;ing962;ing963;ing964;ing965;ing966;ing967;ing968;ing969;ing970;ing971;ing972;ing973;ing974;ing975;ing976;ing977;ing978;ing979;ing980;ing981;ing982;ing983;ing984;ing985;ing986;ing987;ing988;ing989;ing990;ing991;ing992;ing993;ing994;ing995;ing996;ing997;ing998;ing999
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+start;string0;string1;string2;string3;string4;string5;string6;string7;string8;string9;string10;string11;string12;string13;string14;string15;string16;string17;string18;string19;string20;string21;string22;string23;string24;string25;string26;string27;string28;string29;string30;string31;string32;string33;string34;string35;string36;string37;string38;string39;string40;string41;string42;string43;string44;string45;string46;string47;string48;string49;string50;string51;string52;string53;string54;string55;string56;string57;string58;string59;string60;string61;string62;string63;string64;string65;string66;string67;string68;string69;string70;string71;string72;string73;string74;string75;string76;string77;string78;string79;string80;string81;string82;string83;string84;string85;string86;string87;string88;string89;string90;string91;string92;string93;string94;string95;string96;string97;string98;string99;string100;string101;string102;string103;string104;string105;string106;string107;string108;string109;string110;string111;string112;string113;string114;string115;string116;string117;string118;string119;string120;string121;string122;string123;string124;string125;string126;string127;string128;string129;string130;string131;string132;string133;string134;string135;string136;string137;string138;string139;string140;string141;string142;string143;string144;string145;string146;string147;string148;string149;string150;string151;string152;string153;string154;string155;string156;string157;string158;string159;string160;string161;string162;string163;string164;string165;string166;string167;string168;string169;string170;string171;string172;string173;string174;string175;string176;string177;string178;string179;string180;string181;string182;string183;string184;string185;string186;string187;string188;string189;string190;string191;string192;string193;string194;string195;string196;string197;string198;string199;string200;string201;string202;string203;string204;string205;string206;string207;string208;string209;string210;string211;string212;string213;string214;string215;string216;string217;string218;string219;string220;string221;string222;string223;string224;string225;string226;string227;string228;string229;string230;string231;string232;string233;string234;string235;string236;string237;string238;string239;string240;string241;string242;string243;string244;string245;string246;string247;string248;string249;string250;string251;string252;string253;string254;string255;string256;string257;string258;string259;string260;string261;string262;string263;string264;string265;string266;string267;string268;string269;string270;string271;string272;string273;string274;string275;string276;string277;string278;string279;string280;string281;string282;string283;string284;string285;string286;string287;string288;string289;string290;string291;string292;string293;string294;string295;string296;string297;string298;string299;string300;string301;string302;string303;string304;string305;string306;string307;string308;string309;string310;string311;string312;string313;string314;string315;string316;string317;string318;string319;string320;string321;string322;string323;string324;string325;string326;string327;string328;string329;string330;string331;string332;string333;string334;string335;string336;string337;string338;string339;string340;string341;string342;string343;string344;string345;string346;string347;string348;string349;string350;string351;string352;string353;string354;string355;string356;string357;string358;string359;string360;string361;string362;string363;string364;string365;string366;string367;string368;string369;string370;string371;string372;string373;string374;string375;string376;string377;string378;string379;string380;string381;string382;string383;string384;string385;string386;string387;string388;string389;string390;string391;string392;string393;string394;string395;string396;string397;string398;string399;string400;string401;string402;string403;string404;string405;string406;string407;string408;string409;string410;string411;string412;string413;string414;string415;string416;string417;string418;string419;string420;string421;string422;string423;string424;string425;string426;string427;string428;string429;string430;string431;string432;string433;string434;string435;string436;string437;string438;string439;string440;string441;string442;string443;string444;string445;string446;string447;string448;string449;string450;string451;string452;string453;string454;string455;string456;string457;string458;string459;string460;string461;string462;string463;string464;string465;string466;string467;string468;string469;string470;string471;string472;string473;string474;string475;string476;string477;string478;string479;string480;string481;string482;string483;string484;string485;string486;string487;string488;string489;string490;string491;string492;string493;string494;string495;string496;string497;string498;string499;string500;string501;string502;string503;string504;string505;string506;string507;string508;string509;string510;string511;string512;string513;string514;string515;string516;string517;string518;string519;string520;string521;string522;string523;string524;string525;string526;string527;string528;string529;string530;string531;string532;string533;string534;string535;string536;string537;string538;string539;string540;string541;string542;string543;string544;string545;string546;string547;string548;string549;string550;string551;string552;string553;string554;string555;string556;string557;string558;string559;string560;string561;string562;string563;string564;string565;string566;string567;string568;string569;string570;string571;string572;string573;string574;string575;string576;string577;string578;string579;string580;string581;string582;string583;string584;string585;string586;string587;string588;string589;string590;string591;string592;string593;string594;string595;string596;string597;string598;string599;string600;string601;string602;string603;string604;string605;string606;string607;string608;string609;string610;string611;string612;string613;string614;string615;string616;string617;string618;string619;string620;string621;string622;string623;string624;string625;string626;string627;string628;string629;string630;string631;string632;string633;string634;string635;string636;string637;string638;string639;string640;string641;string642;string643;string644;string645;string646;string647;string648;string649;string650;string651;string652;string653;string654;string655;string656;string657;string658;string659;string660;string661;string662;string663;string664;string665;string666;string667;string668;string669;string670;string671;string672;string673;string674;string675;string676;string677;string678;string679;string680;string681;string682;string683;string684;string685;string686;string687;string688;string689;string690;string691;string692;string693;string694;string695;string696;string697;string698;string699;string700;string701;string702;string703;string704;string705;string706;string707;string708;string709;string710;string711;string712;string713;string714;string715;string716;string717;string718;string719;string720;string721;string722;string723;string724;string725;string726;string727;string728;string729;string730;string731;string732;string733;string734;string735;string736;string737;string738;string739;string740;string741;string742;string743;string744;string745;string746;string747;string748;string749;string750;string751;string752;string753;string754;string755;string756;string757;string758;string759;string760;string761;string762;string763;string764;string765;string766;string767;string768;string769;string770;string771;string772;string773;string774;string775;string776;string777;string778;string779;string780;string781;string782;string783;string784;string785;string786;string787;string788;string789;string790;string791;string792;string793;string794;string795;string796;string797;string798;string799;string800;string801;string802;string803;string804;string805;string806;string807;string808;string809;string810;string811;string812;string813;string814;string815;string816;string817;string818;string819;string820;string821;string822;string823;string824;string825;string826;string827;string828;string829;string830;string831;string832;string833;string834;string835;string836;string837;string838;string839;string840;string841;string842;string843;string844;string845;string846;string847;string848;string849;string850;string851;string852;string853;string854;string855;string856;string857;string858;string859;string860;string861;string862;string863;string864;string865;string866;string867;string868;string869;string870;string871;string872;string873;string874;string875;string876;string877;string878;string879;string880;string881;string882;string883;string884;string885;string886;string887;string888;string889;string890;string891;string892;string893;string894;string895;string896;string897;string898;string899;string900;string901;string902;string903;string904;string905;string906;string907;string908;string909;string910;string911;string912;string913;string914;string915;string916;string917;string918;string919;string920;string921;string922;string923;string924;string925;string926;string927;string928;string929;string930;string931;string932;string933;string934;string935;string936;string937;string938;string939;string940;string941;string942;string943;string944;string945;string946;string947;string948;string949;string950;string951;string952;string953;string954;string955;string956;string957;string958;string959;string960;string961;string962;string963;string964;string965;string966;string967;string968;string969;string970;string971;string972;string973;string974;string975;string976;string977;string978;string979;string980;string981;string982;string983;string984;string985;string986;string987;string988;string989;string990;string991;string992;string993;string994;string995;string996;string997;string998;string999
+start;ing0;ing1;ing2;ing3;ing4;ing5;ing6;ing7;ing8;ing9;ing10;ing11;ing12;ing13;ing14;ing15;ing16;ing17;ing18;ing19;ing20;ing21;ing22;ing23;ing24;ing25;ing26;ing27;ing28;ing29;ing30;ing31;ing32;ing33;ing34;ing35;ing36;ing37;ing38;ing39;ing40;ing41;ing42;ing43;ing44;ing45;ing46;ing47;ing48;ing49;ing50;ing51;ing52;ing53;ing54;ing55;ing56;ing57;ing58;ing59;ing60;ing61;ing62;ing63;ing64;ing65;ing66;ing67;ing68;ing69;ing70;ing71;ing72;ing73;ing74;ing75;ing76;ing77;ing78;ing79;ing80;ing81;ing82;ing83;ing84;ing85;ing86;ing87;ing88;ing89;ing90;ing91;ing92;ing93;ing94;ing95;ing96;ing97;ing98;ing99;ing100;ing101;ing102;ing103;ing104;ing105;ing106;ing107;ing108;ing109;ing110;ing111;ing112;ing113;ing114;ing115;ing116;ing117;ing118;ing119;ing120;ing121;ing122;ing123;ing124;ing125;ing126;ing127;ing128;ing129;ing130;ing131;ing132;ing133;ing134;ing135;ing136;ing137;ing138;ing139;ing140;ing141;ing142;ing143;ing144;ing145;ing146;ing147;ing148;ing149;ing150;ing151;ing152;ing153;ing154;ing155;ing156;ing157;ing158;ing159;ing160;ing161;ing162;ing163;ing164;ing165;ing166;ing167;ing168;ing169;ing170;ing171;ing172;ing173;ing174;ing175;ing176;ing177;ing178;ing179;ing180;ing181;ing182;ing183;ing184;ing185;ing186;ing187;ing188;ing189;ing190;ing191;ing192;ing193;ing194;ing195;ing196;ing197;ing198;ing199;ing200;ing201;ing202;ing203;ing204;ing205;ing206;ing207;ing208;ing209;ing210;ing211;ing212;ing213;ing214;ing215;ing216;ing217;ing218;ing219;ing220;ing221;ing222;ing223;ing224;ing225;ing226;ing227;ing228;ing229;ing230;ing231;ing232;ing233;ing234;ing235;ing236;ing237;ing238;ing239;ing240;ing241;ing242;ing243;ing244;ing245;ing246;ing247;ing248;ing249;ing250;ing251;ing252;ing253;ing254;ing255;ing256;ing257;ing258;ing259;ing260;ing261;ing262;ing263;ing264;ing265;ing266;ing267;ing268;ing269;ing270;ing271;ing272;ing273;ing274;ing275;ing276;ing277;ing278;ing279;ing280;ing281;ing282;ing283;ing284;ing285;ing286;ing287;ing288;ing289;ing290;ing291;ing292;ing293;ing294;ing295;ing296;ing297;ing298;ing299;ing300;ing301;ing302;ing303;ing304;ing305;ing306;ing307;ing308;ing309;ing310;ing311;ing312;ing313;ing314;ing315;ing316;ing317;ing318;ing319;ing320;ing321;ing322;ing323;ing324;ing325;ing326;ing327;ing328;ing329;ing330;ing331;ing332;ing333;ing334;ing335;ing336;ing337;ing338;ing339;ing340;ing341;ing342;ing343;ing344;ing345;ing346;ing347;ing348;ing349;ing350;ing351;ing352;ing353;ing354;ing355;ing356;ing357;ing358;ing359;ing360;ing361;ing362;ing363;ing364;ing365;ing366;ing367;ing368;ing369;ing370;ing371;ing372;ing373;ing374;ing375;ing376;ing377;ing378;ing379;ing380;ing381;ing382;ing383;ing384;ing385;ing386;ing387;ing388;ing389;ing390;ing391;ing392;ing393;ing394;ing395;ing396;ing397;ing398;ing399;ing400;ing401;ing402;ing403;ing404;ing405;ing406;ing407;ing408;ing409;ing410;ing411;ing412;ing413;ing414;ing415;ing416;ing417;ing418;ing419;ing420;ing421;ing422;ing423;ing424;ing425;ing426;ing427;ing428;ing429;ing430;ing431;ing432;ing433;ing434;ing435;ing436;ing437;ing438;ing439;ing440;ing441;ing442;ing443;ing444;ing445;ing446;ing447;ing448;ing449;ing450;ing451;ing452;ing453;ing454;ing455;ing456;ing457;ing458;ing459;ing460;ing461;ing462;ing463;ing464;ing465;ing466;ing467;ing468;ing469;ing470;ing471;ing472;ing473;ing474;ing475;ing476;ing477;ing478;ing479;ing480;ing481;ing482;ing483;ing484;ing485;ing486;ing487;ing488;ing489;ing490;ing491;ing492;ing493;ing494;ing495;ing496;ing497;ing498;ing499;ing500;ing501;ing502;ing503;ing504;ing505;ing506;ing507;ing508;ing509;ing510;ing511;ing512;ing513;ing514;ing515;ing516;ing517;ing518;ing519;ing520;ing521;ing522;ing523;ing524;ing525;ing526;ing527;ing528;ing529;ing530;ing531;ing532;ing533;ing534;ing535;ing536;ing537;ing538;ing539;ing540;ing541;ing542;ing543;ing544;ing545;ing546;ing547;ing548;ing549;ing550;ing551;ing552;ing553;ing554;ing555;ing556;ing557;ing558;ing559;ing560;ing561;ing562;ing563;ing564;ing565;ing566;ing567;ing568;ing569;ing570;ing571;ing572;ing573;ing574;ing575;ing576;ing577;ing578;ing579;ing580;ing581;ing582;ing583;ing584;ing585;ing586;ing587;ing588;ing589;ing590;ing591;ing592;ing593;ing594;ing595;ing596;ing597;ing598;ing599;ing600;ing601;ing602;ing603;ing604;ing605;ing606;ing607;ing608;ing609;ing610;ing611;ing612;ing613;ing614;ing615;ing616;ing617;ing618;ing619;ing620;ing621;ing622;ing623;ing624;ing625;ing626;ing627;ing628;ing629;ing630;ing631;ing632;ing633;ing634;ing635;ing636;ing637;ing638;ing639;ing640;ing641;ing642;ing643;ing644;ing645;ing646;ing647;ing648;ing649;ing650;ing651;ing652;ing653;ing654;ing655;ing656;ing657;ing658;ing659;ing660;ing661;ing662;ing663;ing664;ing665;ing666;ing667;ing668;ing669;ing670;ing671;ing672;ing673;ing674;ing675;ing676;ing677;ing678;ing679;ing680;ing681;ing682;ing683;ing684;ing685;ing686;ing687;ing688;ing689;ing690;ing691;ing692;ing693;ing694;ing695;ing696;ing697;ing698;ing699;ing700;ing701;ing702;ing703;ing704;ing705;ing706;ing707;ing708;ing709;ing710;ing711;ing712;ing713;ing714;ing715;ing716;ing717;ing718;ing719;ing720;ing721;ing722;ing723;ing724;ing725;ing726;ing727;ing728;ing729;ing730;ing731;ing732;ing733;ing734;ing735;ing736;ing737;ing738;ing739;ing740;ing741;ing742;ing743;ing744;ing745;ing746;ing747;ing748;ing749;ing750;ing751;ing752;ing753;ing754;ing755;ing756;ing757;ing758;ing759;ing760;ing761;ing762;ing763;ing764;ing765;ing766;ing767;ing768;ing769;ing770;ing771;ing772;ing773;ing774;ing775;ing776;ing777;ing778;ing779;ing780;ing781;ing782;ing783;ing784;ing785;ing786;ing787;ing788;ing789;ing790;ing791;ing792;ing793;ing794;ing795;ing796;ing797;ing798;ing799;ing800;ing801;ing802;ing803;ing804;ing805;ing806;ing807;ing808;ing809;ing810;ing811;ing812;ing813;ing814;ing815;ing816;ing817;ing818;ing819;ing820;ing821;ing822;ing823;ing824;ing825;ing826;ing827;ing828;ing829;ing830;ing831;ing832;ing833;ing834;ing835;ing836;ing837;ing838;ing839;ing840;ing841;ing842;ing843;ing844;ing845;ing846;ing847;ing848;ing849;ing850;ing851;ing852;ing853;ing854;ing855;ing856;ing857;ing858;ing859;ing860;ing861;ing862;ing863;ing864;ing865;ing866;ing867;ing868;ing869;ing870;ing871;ing872;ing873;ing874;ing875;ing876;ing877;ing878;ing879;ing880;ing881;ing882;ing883;ing884;ing885;ing886;ing887;ing888;ing889;ing890;ing891;ing892;ing893;ing894;ing895;ing896;ing897;ing898;ing899;ing900;ing901;ing902;ing903;ing904;ing905;ing906;ing907;ing908;ing909;ing910;ing911;ing912;ing913;ing914;ing915;ing916;ing917;ing918;ing919;ing920;ing921;ing922;ing923;ing924;ing925;ing926;ing927;ing928;ing929;ing930;ing931;ing932;ing933;ing934;ing935;ing936;ing937;ing938;ing939;ing940;ing941;ing942;ing943;ing944;ing945;ing946;ing947;ing948;ing949;ing950;ing951;ing952;ing953;ing954;ing955;ing956;ing957;ing958;ing959;ing960;ing961;ing962;ing963;ing964;ing965;ing966;ing967;ing968;ing969;ing970;ing971;ing972;ing973;ing974;ing975;ing976;ing977;ing978;ing979;ing980;ing981;ing982;ing983;ing984;ing985;ing986;ing987;ing988;ing989;ing990;ing991;ing992;ing993;ing994;ing995;ing996;ing997;ing998;ing999
+start;string0;string1;string2;string3;string4;string5;string6;string7;string8;string9;string10;string11;string12;string13;string14;string15;string16;string17;string18;string19;string20;string21;string22;string23;string24;string25;string26;string27;string28;string29;string30;string31;string32;string33;string34;string35;string36;string37;string38;string39;string40;string41;string42;string43;string44;string45;string46;string47;string48;string49;string50;string51;string52;string53;string54;string55;string56;string57;string58;string59;string60;string61;string62;string63;string64;string65;string66;string67;string68;string69;string70;string71;string72;string73;string74;string75;string76;string77;string78;string79;string80;string81;string82;string83;string84;string85;string86;string87;string88;string89;string90;string91;string92;string93;string94;string95;string96;string97;string98;string99;string100;string101;string102;string103;string104;string105;string106;string107;string108;string109;string110;string111;string112;string113;string114;string115;string116;string117;string118;string119;string120;string121;string122;string123;string124;string125;string126;string127;string128;string129;string130;string131;string132;string133;string134;string135;string136;string137;string138;string139;string140;string141;string142;string143;string144;string145;string146;string147;string148;string149;string150;string151;string152;string153;string154;string155;string156;string157;string158;string159;string160;string161;string162;string163;string164;string165;string166;string167;string168;string169;string170;string171;string172;string173;string174;string175;string176;string177;string178;string179;string180;string181;string182;string183;string184;string185;string186;string187;string188;string189;string190;string191;string192;string193;string194;string195;string196;string197;string198;string199;string200;string201;string202;string203;string204;string205;string206;string207;string208;string209;string210;string211;string212;string213;string214;string215;string216;string217;string218;string219;string220;string221;string222;string223;string224;string225;string226;string227;string228;string229;string230;string231;string232;string233;string234;string235;string236;string237;string238;string239;string240;string241;string242;string243;string244;string245;string246;string247;string248;string249;string250;string251;string252;string253;string254;string255;string256;string257;string258;string259;string260;string261;string262;string263;string264;string265;string266;string267;string268;string269;string270;string271;string272;string273;string274;string275;string276;string277;string278;string279;string280;string281;string282;string283;string284;string285;string286;string287;string288;string289;string290;string291;string292;string293;string294;string295;string296;string297;string298;string299;string300;string301;string302;string303;string304;string305;string306;string307;string308;string309;string310;string311;string312;string313;string314;string315;string316;string317;string318;string319;string320;string321;string322;string323;string324;string325;string326;string327;string328;string329;string330;string331;string332;string333;string334;string335;string336;string337;string338;string339;string340;string341;string342;string343;string344;string345;string346;string347;string348;string349;string350;string351;string352;string353;string354;string355;string356;string357;string358;string359;string360;string361;string362;string363;string364;string365;string366;string367;string368;string369;string370;string371;string372;string373;string374;string375;string376;string377;string378;string379;string380;string381;string382;string383;string384;string385;string386;string387;string388;string389;string390;string391;string392;string393;string394;string395;string396;string397;string398;string399;string400;string401;string402;string403;string404;string405;string406;string407;string408;string409;string410;string411;string412;string413;string414;string415;string416;string417;string418;string419;string420;string421;string422;string423;string424;string425;string426;string427;string428;string429;string430;string431;string432;string433;string434;string435;string436;string437;string438;string439;string440;string441;string442;string443;string444;string445;string446;string447;string448;string449;string450;string451;string452;string453;string454;string455;string456;string457;string458;string459;string460;string461;string462;string463;string464;string465;string466;string467;string468;string469;string470;string471;string472;string473;string474;string475;string476;string477;string478;string479;string480;string481;string482;string483;string484;string485;string486;string487;string488;string489;string490;string491;string492;string493;string494;string495;string496;string497;string498;string499;string500;string501;string502;string503;string504;string505;string506;string507;string508;string509;string510;string511;string512;string513;string514;string515;string516;string517;string518;string519;string520;string521;string522;string523;string524;string525;string526;string527;string528;string529;string530;string531;string532;string533;string534;string535;string536;string537;string538;string539;string540;string541;string542;string543;string544;string545;string546;string547;string548;string549;string550;string551;string552;string553;string554;string555;string556;string557;string558;string559;string560;string561;string562;string563;string564;string565;string566;string567;string568;string569;string570;string571;string572;string573;string574;string575;string576;string577;string578;string579;string580;string581;string582;string583;string584;string585;string586;string587;string588;string589;string590;string591;string592;string593;string594;string595;string596;string597;string598;string599;string600;string601;string602;string603;string604;string605;string606;string607;string608;string609;string610;string611;string612;string613;string614;string615;string616;string617;string618;string619;string620;string621;string622;string623;string624;string625;string626;string627;string628;string629;string630;string631;string632;string633;string634;string635;string636;string637;string638;string639;string640;string641;string642;string643;string644;string645;string646;string647;string648;string649;string650;string651;string652;string653;string654;string655;string656;string657;string658;string659;string660;string661;string662;string663;string664;string665;string666;string667;string668;string669;string670;string671;string672;string673;string674;string675;string676;string677;string678;string679;string680;string681;string682;string683;string684;string685;string686;string687;string688;string689;string690;string691;string692;string693;string694;string695;string696;string697;string698;string699;string700;string701;string702;string703;string704;string705;string706;string707;string708;string709;string710;string711;string712;string713;string714;string715;string716;string717;string718;string719;string720;string721;string722;string723;string724;string725;string726;string727;string728;string729;string730;string731;string732;string733;string734;string735;string736;string737;string738;string739;string740;string741;string742;string743;string744;string745;string746;string747;string748;string749;string750;string751;string752;string753;string754;string755;string756;string757;string758;string759;string760;string761;string762;string763;string764;string765;string766;string767;string768;string769;string770;string771;string772;string773;string774;string775;string776;string777;string778;string779;string780;string781;string782;string783;string784;string785;string786;string787;string788;string789;string790;string791;string792;string793;string794;string795;string796;string797;string798;string799;string800;string801;string802;string803;string804;string805;string806;string807;string808;string809;string810;string811;string812;string813;string814;string815;string816;string817;string818;string819;string820;string821;string822;string823;string824;string825;string826;string827;string828;string829;string830;string831;string832;string833;string834;string835;string836;string837;string838;string839;string840;string841;string842;string843;string844;string845;string846;string847;string848;string849;string850;string851;string852;string853;string854;string855;string856;string857;string858;string859;string860;string861;string862;string863;string864;string865;string866;string867;string868;string869;string870;string871;string872;string873;string874;string875;string876;string877;string878;string879;string880;string881;string882;string883;string884;string885;string886;string887;string888;string889;string890;string891;string892;string893;string894;string895;string896;string897;string898;string899;string900;string901;string902;string903;string904;string905;string906;string907;string908;string909;string910;string911;string912;string913;string914;string915;string916;string917;string918;string919;string920;string921;string922;string923;string924;string925;string926;string927;string928;string929;string930;string931;string932;string933;string934;string935;string936;string937;string938;string939;string940;string941;string942;string943;string944;string945;string946;string947;string948;string949;string950;string951;string952;string953;string954;string955;string956;string957;string958;string959;string960;string961;string962;string963;string964;string965;string966;string967;string968;string969;string970;string971;string972;string973;string974;string975;string976;string977;string978;string979;string980;string981;string982;string983;string984;string985;string986;string987;string988;string989;string990;string991;string992;string993;string994;string995;string996;string997;string998;string999
+start;string0;string1;string2;string3;string4;string5;string6;string7;string8;string9;string10;string11;string12;string13;string14;string15;string16;string17;string18;string19;string20;string21;string22;string23;string24;string25;string26;string27;string28;string29;string30;string31;string32;string33;string34;string35;string36;string37;string38;string39;string40;string41;string42;string43;string44;string45;string46;string47;string48;string49;string50;string51;string52;string53;string54;string55;string56;string57;string58;string59;string60;string61;string62;string63;string64;string65;string66;string67;string68;string69;string70;string71;string72;string73;string74;string75;string76;string77;string78;string79;string80;string81;string82;string83;string84;string85;string86;string87;string88;string89;string90;string91;string92;string93;string94;string95;string96;string97;string98;string99;string100;string101;string102;string103;string104;string105;string106;string107;string108;string109;string110;string111;string112;string113;string114;string115;string116;string117;string118;string119;string120;string121;string122;string123;string124;string125;string126;string127;string128;string129;string130;string131;string132;string133;string134;string135;string136;string137;string138;string139;string140;string141;string142;string143;string144;string145;string146;string147;string148;string149;string150;string151;string152;string153;string154;string155;string156;string157;string158;string159;string160;string161;string162;string163;string164;string165;string166;string167;string168;string169;string170;string171;string172;string173;string174;string175;string176;string177;string178;string179;string180;string181;string182;string183;string184;string185;string186;string187;string188;string189;string190;string191;string192;string193;string194;string195;string196;string197;string198;string199;string200;string201;string202;string203;string204;string205;string206;string207;string208;string209;string210;string211;string212;string213;string214;string215;string216;string217;string218;string219;string220;string221;string222;string223;string224;string225;string226;string227;string228;string229;string230;string231;string232;string233;string234;string235;string236;string237;string238;string239;string240;string241;string242;string243;string244;string245;string246;string247;string248;string249;string250;string251;string252;string253;string254;string255;string256;string257;string258;string259;string260;string261;string262;string263;string264;string265;string266;string267;string268;string269;string270;string271;string272;string273;string274;string275;string276;string277;string278;string279;string280;string281;string282;string283;string284;string285;string286;string287;string288;string289;string290;string291;string292;string293;string294;string295;string296;string297;string298;string299;string300;string301;string302;string303;string304;string305;string306;string307;string308;string309;string310;string311;string312;string313;string314;string315;string316;string317;string318;string319;string320;string321;string322;string323;string324;string325;string326;string327;string328;string329;string330;string331;string332;string333;string334;string335;string336;string337;string338;string339;string340;string341;string342;string343;string344;string345;string346;string347;string348;string349;string350;string351;string352;string353;string354;string355;string356;string357;string358;string359;string360;string361;string362;string363;string364;string365;string366;string367;string368;string369;string370;string371;string372;string373;string374;string375;string376;string377;string378;string379;string380;string381;string382;string383;string384;string385;string386;string387;string388;string389;string390;string391;string392;string393;string394;string395;string396;string397;string398;string399;string400;string401;string402;string403;string404;string405;string406;string407;string408;string409;string410;string411;string412;string413;string414;string415;string416;string417;string418;string419;string420;string421;string422;string423;string424;string425;string426;string427;string428;string429;string430;string431;string432;string433;string434;string435;string436;string437;string438;string439;string440;string441;string442;string443;string444;string445;string446;string447;string448;string449;string450;string451;string452;string453;string454;string455;string456;string457;string458;string459;string460;string461;string462;string463;string464;string465;string466;string467;string468;string469;string470;string471;string472;string473;string474;string475;string476;string477;string478;string479;string480;string481;string482;string483;string484;string485;string486;string487;string488;string489;string490;string491;string492;string493;string494;string495;string496;string497;string498;string499;string500;string501;string502;string503;string504;string505;string506;string507;string508;string509;string510;string511;string512;string513;string514;string515;string516;string517;string518;string519;string520;string521;string522;string523;string524;string525;string526;string527;string528;string529;string530;string531;string532;string533;string534;string535;string536;string537;string538;string539;string540;string541;string542;string543;string544;string545;string546;string547;string548;string549;string550;string551;string552;string553;string554;string555;string556;string557;string558;string559;string560;string561;string562;string563;string564;string565;string566;string567;string568;string569;string570;string571;string572;string573;string574;string575;string576;string577;string578;string579;string580;string581;string582;string583;string584;string585;string586;string587;string588;string589;string590;string591;string592;string593;string594;string595;string596;string597;string598;string599;string600;string601;string602;string603;string604;string605;string606;string607;string608;string609;string610;string611;string612;string613;string614;string615;string616;string617;string618;string619;string620;string621;string622;string623;string624;string625;string626;string627;string628;string629;string630;string631;string632;string633;string634;string635;string636;string637;string638;string639;string640;string641;string642;string643;string644;string645;string646;string647;string648;string649;string650;string651;string652;string653;string654;string655;string656;string657;string658;string659;string660;string661;string662;string663;string664;string665;string666;string667;string668;string669;string670;string671;string672;string673;string674;string675;string676;string677;string678;string679;string680;string681;string682;string683;string684;string685;string686;string687;string688;string689;string690;string691;string692;string693;string694;string695;string696;string697;string698;string699;string700;string701;string702;string703;string704;string705;string706;string707;string708;string709;string710;string711;string712;string713;string714;string715;string716;string717;string718;string719;string720;string721;string722;string723;string724;string725;string726;string727;string728;string729;string730;string731;string732;string733;string734;string735;string736;string737;string738;string739;string740;string741;string742;string743;string744;string745;string746;string747;string748;string749;string750;string751;string752;string753;string754;string755;string756;string757;string758;string759;string760;string761;string762;string763;string764;string765;string766;string767;string768;string769;string770;string771;string772;string773;string774;string775;string776;string777;string778;string779;string780;string781;string782;string783;string784;string785;string786;string787;string788;string789;string790;string791;string792;string793;string794;string795;string796;string797;string798;string799;string800;string801;string802;string803;string804;string805;string806;string807;string808;string809;string810;string811;string812;string813;string814;string815;string816;string817;string818;string819;string820;string821;string822;string823;string824;string825;string826;string827;string828;string829;string830;string831;string832;string833;string834;string835;string836;string837;string838;string839;string840;string841;string842;string843;string844;string845;string846;string847;string848;string849;string850;string851;string852;string853;string854;string855;string856;string857;string858;string859;string860;string861;string862;string863;string864;string865;string866;string867;string868;string869;string870;string871;string872;string873;string874;string875;string876;string877;string878;string879;string880;string881;string882;string883;string884;string885;string886;string887;string888;string889;string890;string891;string892;string893;string894;string895;string896;string897;string898;string899;string900;string901;string902;string903;string904;string905;string906;string907;string908;string909;string910;string911;string912;string913;string914;string915;string916;string917;string918;string919;string920;string921;string922;string923;string924;string925;string926;string927;string928;string929;string930;string931;string932;string933;string934;string935;string936;string937;string938;string939;string940;string941;string942;string943;string944;string945;string946;string947;string948;string949;string950;string951;string952;string953;string954;string955;string956;string957;string958;string959;string960;string961;string962;string963;string964;string965;string966;string967;string968;string969;string970;string971;string972;string973;string974;string975;string976;string977;string978;string979;string980;string981;string982;string983;string984;string985;string986;string987;string988;string989;string990;string991;string992;string993;string994;string995;string996;string997;string998;string999
+ing999
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+art;string0;string1;string2;string3;string4;string5;string6;string7;string8;string9;string10;string11;string12;string13;string14;string15;string16;string17;string18;string19;string20;string21;string22;string23;string24;string25;string26;string27;string28;string29;string30;string31;string32;string33;string34;string35;string36;string37;string38;string39;string40;string41;string42;string43;string44;string45;string46;string47;string48;string49;string50;string51;string52;string53;string54;string55;string56;string57;string58;string59;string60;string61;string62;string63;string64;string65;string66;string67;string68;string69;string70;string71;string72;string73;string74;string75;string76;string77;string78;string79;string80;string81;string82;string83;string84;string85;string86;string87;string88;string89;string90;string91;string92;string93;string94;string95;string96;string97;string98;string99;string100;string101;string102;string103;string104;string105;string106;string107;string108;string109;string110;string111;string112;string113;string114;string115;string116;string117;string118;string119;string120;string121;string122;string123;string124;string125;string126;string127;string128;string129;string130;string131;string132;string133;string134;string135;string136;string137;string138;string139;string140;string141;string142;string143;string144;string145;string146;string147;string148;string149;string150;string151;string152;string153;string154;string155;string156;string157;string158;string159;string160;string161;string162;string163;string164;string165;string166;string167;string168;string169;string170;string171;string172;string173;string174;string175;string176;string177;string178;string179;string180;string181;string182;string183;string184;string185;string186;string187;string188;string189;string190;string191;string192;string193;string194;string195;string196;string197;string198;string199;string200;string201;string202;string203;string204;string205;string206;string207;string208;string209;string210;string211;string212;string213;string214;string215;string216;string217;string218;string219;string220;string221;string222;string223;string224;string225;string226;string227;string228;string229;string230;string231;string232;string233;string234;string235;string236;string237;string238;string239;string240;string241;string242;string243;string244;string245;string246;string247;string248;string249;string250;string251;string252;string253;string254;string255;string256;string257;string258;string259;string260;string261;string262;string263;string264;string265;string266;string267;string268;string269;string270;string271;string272;string273;string274;string275;string276;string277;string278;string279;string280;string281;string282;string283;string284;string285;string286;string287;string288;string289;string290;string291;string292;string293;string294;string295;string296;string297;string298;string299;string300;string301;string302;string303;string304;string305;string306;string307;string308;string309;string310;string311;string312;string313;string314;string315;string316;string317;string318;string319;string320;string321;string322;string323;string324;string325;string326;string327;string328;string329;string330;string331;string332;string333;string334;string335;string336;string337;string338;string339;string340;string341;string342;string343;string344;string345;string346;string347;string348;string349;string350;string351;string352;string353;string354;string355;string356;string357;string358;string359;string360;string361;string362;string363;string364;string365;string366;string367;string368;string369;string370;string371;string372;string373;string374;string375;string376;string377;string378;string379;string380;string381;string382;string383;string384;string385;string386;string387;string388;string389;string390;string391;string392;string393;string394;string395;string396;string397;string398;string399;string400;string401;string402;string403;string404;string405;string406;string407;string408;string409;string410;string411;string412;string413;string414;string415;string416;string417;string418;string419;string420;string421;string422;string423;string424;string425;string426;string427;string428;string429;string430;string431;string432;string433;string434;string435;string436;string437;string438;string439;string440;string441;string442;string443;string444;string445;string446;string447;string448;string449;string450;string451;string452;string453;string454;string455;string456;string457;string458;string459;string460;string461;string462;string463;string464;string465;string466;string467;string468;string469;string470;string471;string472;string473;string474;string475;string476;string477;string478;string479;string480;string481;string482;string483;string484;string485;string486;string487;string488;string489;string490;string491;string492;string493;string494;string495;string496;string497;string498;string499;string500;string501;string502;string503;string504;string505;string506;string507;string508;string509;string510;string511;string512;string513;string514;string515;string516;string517;string518;string519;string520;string521;string522;string523;string524;string525;string526;string527;string528;string529;string530;string531;string532;string533;string534;string535;string536;string537;string538;string539;string540;string541;string542;string543;string544;string545;string546;string547;string548;string549;string550;string551;string552;string553;string554;string555;string556;string557;string558;string559;string560;string561;string562;string563;string564;string565;string566;string567;string568;string569;string570;string571;string572;string573;string574;string575;string576;string577;string578;string579;string580;string581;string582;string583;string584;string585;string586;string587;string588;string589;string590;string591;string592;string593;string594;string595;string596;string597;string598;string599;string600;string601;string602;string603;string604;string605;string606;string607;string608;string609;string610;string611;string612;string613;string614;string615;string616;string617;string618;string619;string620;string621;string622;string623;string624;string625;string626;string627;string628;string629;string630;string631;string632;string633;string634;string635;string636;string637;string638;string639;string640;string641;string642;string643;string644;string645;string646;string647;string648;string649;string650;string651;string652;string653;string654;string655;string656;string657;string658;string659;string660;string661;string662;string663;string664;string665;string666;string667;string668;string669;string670;string671;string672;string673;string674;string675;string676;string677;string678;string679;string680;string681;string682;string683;string684;string685;string686;string687;string688;string689;string690;string691;string692;string693;string694;string695;string696;string697;string698;string699;string700;string701;string702;string703;string704;string705;string706;string707;string708;string709;string710;string711;string712;string713;string714;string715;string716;string717;string718;string719;string720;string721;string722;string723;string724;string725;string726;string727;string728;string729;string730;string731;string732;string733;string734;string735;string736;string737;string738;string739;string740;string741;string742;string743;string744;string745;string746;string747;string748;string749;string750;string751;string752;string753;string754;string755;string756;string757;string758;string759;string760;string761;string762;string763;string764;string765;string766;string767;string768;string769;string770;string771;string772;string773;string774;string775;string776;string777;string778;string779;string780;string781;string782;string783;string784;string785;string786;string787;string788;string789;string790;string791;string792;string793;string794;string795;string796;string797;string798;string799;string800;string801;string802;string803;string804;string805;string806;string807;string808;string809;string810;string811;string812;string813;string814;string815;string816;string817;string818;string819;string820;string821;string822;string823;string824;string825;string826;string827;string828;string829;string830;string831;string832;string833;string834;string835;string836;string837;string838;string839;string840;string841;string842;string843;string844;string845;string846;string847;string848;string849;string850;string851;string852;string853;string854;string855;string856;string857;string858;string859;string860;string861;string862;string863;string864;string865;string866;string867;string868;string869;string870;string871;string872;string873;string874;string875;string876;string877;string878;string879;string880;string881;string882;string883;string884;string885;string886;string887;string888;string889;string890;string891;string892;string893;string894;string895;string896;string897;string898;string899;string900;string901;string902;string903;string904;string905;string906;string907;string908;string909;string910;string911;string912;string913;string914;string915;string916;string917;string918;string919;string920;string921;string922;string923;string924;string925;string926;string927;string928;string929;string930;string931;string932;string933;string934;string935;string936;string937;string938;string939;string940;string941;string942;string943;string944;string945;string946;string947;string948;string949;string950;string951;string952;string953;string954;string955;string956;string957;string958;string959;string960;string961;string962;string963;string964;string965;string966;string967;string968;string969;string970;string971;string972;string973;string974;string975;string976;string977;string978;string979;string980;string981;string982;string983;string984;string985;string986;string987;string988;string989;string990;string991;string992;string993;string994;string995;string996;string997;string998;string999
+start;string0;string1;string2;string3;string4;string5;string6;string7;string8;string9;string10;string11;string12;string13;string14;string15;string16;string17;string18;string19;string20;string21;string22;string23;string24;string25;string26;string27;string28;string29;string30;string31;string32;string33;string34;string35;string36;string37;string38;string39;string40;string41;string42;string43;string44;string45;string46;string47;string48;string49;string50;string51;string52;string53;string54;string55;string56;string57;string58;string59;string60;string61;string62;string63;string64;string65;string66;string67;string68;string69;string70;string71;string72;string73;string74;string75;string76;string77;string78;string79;string80;string81;string82;string83;string84;string85;string86;string87;string88;string89;string90;string91;string92;string93;string94;string95;string96;string97;string98;string99;string100;string101;string102;string103;string104;string105;string106;string107;string108;string109;string110;string111;string112;string113;string114;string115;string116;string117;string118;string119;string120;string121;string122;string123;string124;string125;string126;string127;string128;string129;string130;string131;string132;string133;string134;string135;string136;string137;string138;string139;string140;string141;string142;string143;string144;string145;string146;string147;string148;string149;string150;string151;string152;string153;string154;string155;string156;string157;string158;string159;string160;string161;string162;string163;string164;string165;string166;string167;string168;string169;string170;string171;string172;string173;string174;string175;string176;string177;string178;string179;string180;string181;string182;string183;string184;string185;string186;string187;string188;string189;string190;string191;string192;string193;string194;string195;string196;string197;string198;string199;string200;string201;string202;string203;string204;string205;string206;string207;string208;string209;string210;string211;string212;string213;string214;string215;string216;string217;string218;string219;string220;string221;string222;string223;string224;string225;string226;string227;string228;string229;string230;string231;string232;string233;string234;string235;string236;string237;string238;string239;string240;string241;string242;string243;string244;string245;string246;string247;string248;string249;string250;string251;string252;string253;string254;string255;string256;string257;string258;string259;string260;string261;string262;string263;string264;string265;string266;string267;string268;string269;string270;string271;string272;string273;string274;string275;string276;string277;string278;string279;string280;string281;string282;string283;string284;string285;string286;string287;string288;string289;string290;string291;string292;string293;string294;string295;string296;string297;string298;string299;string300;string301;string302;string303;string304;string305;string306;string307;string308;string309;string310;string311;string312;string313;string314;string315;string316;string317;string318;string319;string320;string321;string322;string323;string324;string325;string326;string327;string328;string329;string330;string331;string332;string333;string334;string335;string336;string337;string338;string339;string340;string341;string342;string343;string344;string345;string346;string347;string348;string349;string350;string351;string352;string353;string354;string355;string356;string357;string358;string359;string360;string361;string362;string363;string364;string365;string366;string367;string368;string369;string370;string371;string372;string373;string374;string375;string376;string377;string378;string379;string380;string381;string382;string383;string384;string385;string386;string387;string388;string389;string390;string391;string392;string393;string394;string395;string396;string397;string398;string399;string400;string401;string402;string403;string404;string405;string406;string407;string408;string409;string410;string411;string412;string413;string414;string415;string416;string417;string418;string419;string420;string421;string422;string423;string424;string425;string426;string427;string428;string429;string430;string431;string432;string433;string434;string435;string436;string437;string438;string439;string440;string441;string442;string443;string444;string445;string446;string447;string448;string449;string450;string451;string452;string453;string454;string455;string456;string457;string458;string459;string460;string461;string462;string463;string464;string465;string466;string467;string468;string469;string470;string471;string472;string473;string474;string475;string476;string477;string478;string479;string480;string481;string482;string483;string484;string485;string486;string487;string488;string489;string490;string491;string492;string493;string494;string495;string496;string497;string498;string499;string500;string501;string502;string503;string504;string505;string506;string507;string508;string509;string510;string511;string512;string513;string514;string515;string516;string517;string518;string519;string520;string521;string522;string523;string524;string525;string526;string527;string528;string529;string530;string531;string532;string533;string534;string535;string536;string537;string538;string539;string540;string541;string542;string543;string544;string545;string546;string547;string548;string549;string550;string551;string552;string553;string554;string555;string556;string557;string558;string559;string560;string561;string562;string563;string564;string565;string566;string567;string568;string569;string570;string571;string572;string573;string574;string575;string576;string577;string578;string579;string580;string581;string582;string583;string584;string585;string586;string587;string588;string589;string590;string591;string592;string593;string594;string595;string596;string597;string598;string599;string600;string601;string602;string603;string604;string605;string606;string607;string608;string609;string610;string611;string612;string613;string614;string615;string616;string617;string618;string619;string620;string621;string622;string623;string624;string625;string626;string627;string628;string629;string630;string631;string632;string633;string634;string635;string636;string637;string638;string639;string640;string641;string642;string643;string644;string645;string646;string647;string648;string649;string650;string651;string652;string653;string654;string655;string656;string657;string658;string659;string660;string661;string662;string663;string664;string665;string666;string667;string668;string669;string670;string671;string672;string673;string674;string675;string676;string677;string678;string679;string680;string681;string682;string683;string684;string685;string686;string687;string688;string689;string690;string691;string692;string693;string694;string695;string696;string697;string698;string699;string700;string701;string702;string703;string704;string705;string706;string707;string708;string709;string710;string711;string712;string713;string714;string715;string716;string717;string718;string719;string720;string721;string722;string723;string724;string725;string726;string727;string728;string729;string730;string731;string732;string733;string734;string735;string736;string737;string738;string739;string740;string741;string742;string743;string744;string745;string746;string747;string748;string749;string750;string751;string752;string753;string754;string755;string756;string757;string758;string759;string760;string761;string762;string763;string764;string765;string766;string767;string768;string769;string770;string771;string772;string773;string774;string775;string776;string777;string778;string779;string780;string781;string782;string783;string784;string785;string786;string787;string788;string789;string790;string791;string792;string793;string794;string795;string796;string797;string798;string799;string800;string801;string802;string803;string804;string805;string806;string807;string808;string809;string810;string811;string812;string813;string814;string815;string816;string817;string818;string819;string820;string821;string822;string823;string824;string825;string826;string827;string828;string829;string830;string831;string832;string833;string834;string835;string836;string837;string838;string839;string840;string841;string842;string843;string844;string845;string846;string847;string848;string849;string850;string851;string852;string853;string854;string855;string856;string857;string858;string859;string860;string861;string862;string863;string864;string865;string866;string867;string868;string869;string870;string871;string872;string873;string874;string875;string876;string877;string878;string879;string880;string881;string882;string883;string884;string885;string886;string887;string888;string889;string890;string891;string892;string893;string894;string895;string896;string897;string898;string899;string900;string901;string902;string903;string904;string905;string906;string907;string908;string909;string910;string911;string912;string913;string914;string915;string916;string917;string918;string919;string920;string921;string922;string923;string924;string925;string926;string927;string928;string929;string930;string931;string932;string933;string934;string935;string936;string937;string938;string939;string940;string941;string942;string943;string944;string945;string946;string947;string948;string949;string950;string951;string952;string953;string954;string955;string956;string957;string958;string959;string960;string961;string962;string963;string964;string965;string966;string967;string968;string969;string970;string971;string972;string973;string974;string975;string976;string977;string978;string979;string980;string981;string982;string983;string984;string985;string986;string987;string988;string989;string990;string991;string992;string993;string994;string995;string996;string997;string998;string9
+zbcd
+axd
+axxd
+axxd
+zzzz
+zbcd
+axd
+axxd
+axxd
+zzzz
+a Value = 1 2 3 4 5
+a Sub = 0 1 2 3 4
+b Value = a b c d e
+b Sub = 0 1 2 3 4
+c Value = 10 20 40 80
+c Sub = 0 2 4 8
+<1> <2> <3> <4> <5> 
+<10> <20> <40> <80> 
+<>
+<>
+<>
+<>
+<'ab '\''cd'\'' ef'> 
+./new-exp10.sub: line 24: ${x@C}: bad substitution
+<'ab'> <'cd ef'> <''> <'gh'> 
+<'ab' 'cd ef' '' 'gh'> 
+<'ab'> <'cd> <ef'> <''> <'gh'> 
+<'ab'> <'cd> <ef'> <''> <'gh'> 
+<'ab cd'> 
+<'4'> <'ab cd'> 
+<> 
+argv[1] = <host(2)[5.1]$ >
+< 	
+>
+<' \t\n'>
+< 	
+>
+<$' \t\n'>
+declare -r x='ab '\''cd'\'' ef'
+set -- 'ab' 'cd ef' '' 'gh' 
+declare -a A=([0]="ab" [1]="cd ef" [2]="" [3]="gh") 
+declare -a B=() 
+declare -A A=([four]="de" [two]="b c" [three]="" [one]="1" ) 
+r
+a 
+A 
+ir
+a b c d e
+5
+a5b
+i
+declare -i foo
+A
+declare -A foo
+abcxxxdef
+abcådef
+ḅć
+Ã¥
+prependḅć
+Ã¥append
+prependå
+ḅćappend
+Ã¥
+ḅć
+ḅć
+ḅć
+Ã¥
+Ã¥
+Ã¥
+ḅć
+Ã¥
+Ã¥
+ḅć
+ḅć
+HELLO;1 foo;2 foo;
+PASS;1 foo;2 foo;
+after: PASS
+'zzz'
+'zzz'
+declare -rl VAR1
+declare -rl VAR1
+declare -rl VAR1
+declare -rl VAR1
+rl
+rl
+rl
+rl
+declare -arl VAR3
+declare -arl VAR3
+declare -arl VAR3
+declare -arl VAR3
+arl
+arl
+arl
+arl
+one
+one
+'aaa'
+'aaa' 'bbb'
+./new-exp13.sub: line 56: aaa bbb: invalid variable name
+aaa bbb
+0 1
+'aaa'
+'aaa' 'bbb'
+'aaa' 'bbb'
+'aaa' 'bbb'
+a bbb
+aaa bb
+'string'
+'value with spaces'
+'a b' 'c d' 'e f'
+'a b' 'c d' 'e f'
+0 "zero" 1 "one" 2 "two" 3 "three"
+0 "zero z" 1 "one o" 2 "two t" 3 "three t"
+declare -a foo=()
+ai
+declare -ai foo
+bash: line 1: foo: unbound variable
+ai
+declare -ai foo
+bash: line 1: !bar: unbound variable
+a
+a
+a
+a
+argv[1] = </>
+argv[1] = </>
+
+./new-exp.tests: line 1: ABXD: parameter unset
diff --git a/tests/new-exp.tests b/tests/new-exp.tests
new file mode 100644
index 0000000..079426c
--- /dev/null
+++ b/tests/new-exp.tests
@@ -0,0 +1,650 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+if (( $UID == 0 )); then
+	echo "new-exp.tests: the test suite should not be run as root" >&2
+fi
+
+# must do this because posix mode causes process substitution to be disabled
+# and flagged as a syntax error, which causes the shell to exit
+set +o posix
+
+expect()
+{
+        echo expect "$@"
+}
+
+HOME=/usr/homes/chet	# to make the check against new-exp.right work
+expect '<foo bar>'
+recho "${undef-"foo bar"}"	# should be foo bar
+expect '<foo>'
+recho "${und="foo"}"		# should be foo
+
+expect "<$HOME>"
+recho ${HOME-"}"}
+expect "<$HOME>"
+recho "${HOME-'}'}"
+expect "<$HOME>"
+recho "${HOME-"}"}"
+
+expect $0: 'HOME: }: syntax error: operand expected (error token is "}")'
+recho "${HOME:`echo }`}"	# should be a math error -- bad substring substitution
+
+expect unset
+_ENV=oops
+x=${_ENV[(_$-=0)+(_=1)-_${-%%*i*}]}
+echo ${x:-unset}
+
+expect "<$HOME>"
+recho ${HOME}
+expect "<$HOME>"
+recho ${HOME:-`echo }`}
+expect "<$HOME>"
+recho ${HOME:-`echo "}"`}
+expect "<$HOME>"
+recho "${HOME:-`echo "}"`}"
+expect "<$HOME>"
+recho "$(echo "${HOME}")"
+expect "<$HOME>"
+recho "$(echo "$(echo ${HOME})")"
+expect "<$HOME>"
+recho "$(echo "$(echo "${HOME}")")"
+
+P=*@*
+expect '<*@>'
+recho "${P%"*"}"	# 
+expect '<*@>'
+recho "${P%'*'}"	# 
+expect '<@*>'
+recho "${P#\*}"		# should be @*
+
+expect '<)>'
+recho "$(echo ")")"	# should be )
+expect '<")">'
+recho "$(echo "\")\"")"	# should be ")"
+
+foo='abcd   '
+expect '<-abcd> <->'
+recho -${foo}-		# should be -abcd -
+expect '<-abcd> <->'
+recho -${foo% *}-	# should be -abcd -
+expect '<-abcd->'
+recho -${foo%% *}-	# should be -abcd-
+
+foo=bar
+expect '<bar foo>'
+echo -n $foo' ' ; echo foo
+
+expect '<bar foo>'
+echo -n $foo" " ; echo foo
+
+expect '<bar foo>'
+echo -n "$foo " ; echo foo
+
+expect '<barfoo>'
+echo -e "$foo\c " ; echo foo
+
+expect '<barfoo>'
+echo -e $foo"\c " ; echo foo
+
+# make sure backslashes are preserved in front of characters that are not
+# valid backslash escapes
+expect '<\x>'
+echo -e '\x'
+
+# substring tests
+z=abcdefghijklmnop
+expect '<abcd>'
+recho ${z:0:4}
+
+expect '<efg> <nop>'
+recho ${z:4:3} ${z:${#z}-3:3}
+
+expect '<efg> <nop>'
+recho ${z:4:3} ${z: -3:3}
+
+expect '<hijklmnop>'
+recho ${z:7:30}
+
+expect '<abcdefghijklmnop>'
+recho ${z:0:100}
+
+expect '<abcdefghijklmnop>'
+recho ${z:0:${#z}}
+
+set 'ab cd' 'ef' 'gh ij' 'kl mn' 'op'
+expect '<ab cd> <ef>'
+recho "${@:1:2}"
+
+expect '<gh ij> <kl mn>'
+recho "${@:3:2}"
+
+expect '<gh ij> <kl mn> <op>'
+recho "${@:3:4}"
+
+expect '<ab cd> <ef> <gh ij> <kl mn> <op>'
+recho "${@:1:$#}"
+
+# code to ad-hoc parse arithmetic expressions in substring expansions was
+# broken until post-2.04
+base=/home/chet/foo//bar
+string1=$base/abcabcabc
+x=1 j=4
+
+expect '</home/chet/foo//bar/abcabcabc>'
+recho ${string1:0}
+
+expect '<home/chet/foo//bar/abcabcabc>'
+recho ${string1:1}
+
+expect '<home>'
+recho ${string1:(j?1:0):j}
+
+expect '<home>'
+recho ${string1:j?1:0:j}
+
+expect '<home>'
+recho ${string1:(j?(x?1:0):0):j}
+
+expect '<home>'
+recho ${string1:j?(x?1:0):0:j}
+
+unset base string1 x j
+
+# indirect variable references
+expect '<abcdefghijklmnop>'
+recho ${!9:-$z}
+
+ef=4
+expect '<4>'
+recho ${!2}
+
+expect '<op>'
+recho ${!#}
+
+set a b c d e
+a=
+expect '<abcdefghijklmnop>'
+recho ${a:-$z}
+expect '<abcdefghijklmnop>'
+recho ${!1:-$z}
+
+expect nothing
+recho ${a-$z}
+expect nothing
+recho ${!1-$z}
+
+set -- a 'b c' d
+unset foo
+foo=@
+expect '<a> <b> <c> <d>'
+recho ${!foo}
+expect '<a> <b c> <d>'
+recho "${!foo}"
+
+set -u
+expect $0: ABX: unbound variable
+( recho ${ABX} )
+set +u
+
+expect $0: '$6: cannot assign in this way'
+recho ${6="arg6"}
+
+v=abcde
+
+# sed-like variable substitution
+expect '<xxcde>'
+recho ${v/a[a-z]/xx}
+expect '<axxde>'
+recho ${v/a??/axx}
+expect '<abxyz>'
+recho ${v/c??/xyz}
+expect '<abbcde>'
+recho ${v/#a/ab}
+expect '<abcde>'
+recho ${v/#d/ab}
+expect '<abcabe>'
+recho ${v/d/ab}
+expect '<abcdlast>'
+recho ${v/%?/last}
+expect '<abcde>'
+recho ${v/%x/last}
+
+av=(abcd efgh ijkl mnop qrst uvwx)
+
+expect '<xxcd>'
+recho ${av/??/xx}
+expect '<abxx>'
+recho ${av/%??/xx}
+expect '<xxgh>'
+recho ${av[1]/??/xx}
+expect '<efgh>'
+recho ${av[1]/%ab/xx}
+expect '<xxfgh>'
+recho ${av[1]/#?/xx}
+expect '<zagh>'
+recho ${av[1]/??/za}
+expect '<zaza>'
+recho ${av[1]//??/za}
+expect '<zagh>'
+recho ${av[1]/#??/za}
+expect '<efza>'
+recho ${av[1]/%??/za}
+
+expect '<yyy> <yyy> <yyy> <yyy> <yyy> <yyy>'
+recho ${av[@]/*/yyy}
+expect '<yyy> <yyy> <yyy> <yyy> <yyy> <yyy>'
+recho ${av[@]/#*/yyy}
+expect '<yyy> <yyy> <yyy> <yyy> <yyy> <yyy>'
+recho ${av[@]/%*/yyy}
+expect '<yyy> <efgh> <ijkl> <mnop> <qrst> <uvwx>'
+recho ${av[@]/a*/yyy}
+expect '<abxx> <efxx> <ijxx> <mnxx> <qrxx> <uvxx>'
+recho ${av[@]/%??/xx}
+
+set abcd efgh ijkl mnop qrst uvwx
+
+expect '<xxcd>'
+recho ${1/??/xx}
+expect '<xxcd> <xxgh> <xxkl> <xxop> <xxst> <xxwx>'
+recho ${@/??/xx}
+expect '<xxcd> <xxgh> <xxkl> <xxop> <xxst> <xxwx>'
+recho ${@/%??/xx}
+expect '<zaza>'
+recho ${3//??/za}
+expect '<efza>'
+recho ${3/%??/za}
+expect '<zaza> <zaza> <zaza> <zaza> <zaza> <zaza>'
+recho ${@//??/za}
+expect '<zacd> <zagh> <zakl> <zaop> <zast> <zawx>'
+recho ${@/#??/za}
+expect '<yyy> <yyy> <yyy> <yyy> <yyy> <yyy>'
+recho ${@//*/yyy}
+expect '<yyy> <efgh> <ijkl> <mnop> <qrst> <uvwx>'
+recho ${@//a*/yyy}
+expect '<abcd> <efgh> <ijkl> <mnop> <qrst> <uvwyyy>'
+recho ${@/%x*/yyy}
+
+expect a newline
+echo $abmcde
+
+# sneaky way to replace a newline in a variable value with something else
+AVAR=$'This\nstring\nhas\nmultiple\nlines.'
+echo "${AVAR}"
+
+eval BVAR=\"\${AVAR//$'\n'/-}\"
+echo "$BVAR"
+
+unset AVAR BVAR
+
+# run process substitution tests in a subshell so that syntax errors
+# caused by a shell not implementing process substitution (e.g., one
+# built on a NeXT) will not cause the whole test to exit prematurely
+${THIS_SH} ./new-exp1.sub
+
+# run the tests of $(<filename) in a subshell to avoid cluttering up
+# this script
+${THIS_SH} ./new-exp2.sub
+
+expect '<6>'
+recho ${#:-foo}
+expect $0: '${#:}: bad substitution'
+echo ${#:}
+
+expect "<'>"
+recho "'"
+expect '<">'
+recho '"'
+expect '<"hello">'
+recho "\"hello\""
+
+shift $#
+unset foo
+z=abcdef
+z1='abc def'
+
+expect '<>'
+recho ${foo:-""}
+expect nothing
+recho ${foo:-"$@"}
+expect '<>'
+recho "${foo:-$@}"
+
+# unset var
+expect '<>'
+recho ${foo:-"$zbcd"}
+expect nothing
+recho ${foo:-$zbcd}
+
+# set var
+expect '<abcdef>'
+recho ${foo:-"$z"}
+expect '<abc def>'
+recho ${foo:-"$z1"}
+
+expect '<abcdef>'
+recho ${foo:-$z}
+expect '<abc> <def>'
+recho ${foo:-$z1}
+
+expect '<abcdef>'
+recho "${foo:-$z}"
+expect '<abc def>'
+recho "${foo:-$z1}"
+
+expect '<abcdef>'
+recho "${foo:-"$z"}"
+# this disagrees with sh and ksh, but I think it is right according
+# to posix.2.
+expect '<abc def>'
+recho "${foo:-"$z1"}"
+
+set ab cd ef gh
+expect '<ab> <cd> <ef> <gh>'
+recho ${foo:-"$@"}
+expect '<ab> <cd> <ef> <gh>'
+recho "${foo:-$@}"
+expect '<ab> <cd> <ef> <gh>'
+recho "${foo:-"$@"}"
+
+shift ${#}
+expect nothing
+recho $xxx"$@"
+expect nothing
+recho ${foo:-$xxx"$@"}
+expect '<>'
+recho "${foo:-$xxx$@}"
+expect '<>'
+recho "${foo:-$xxx"$@"}"
+
+expect nothing
+recho $xxx"$@"
+expect nothing
+recho "$xxx$@"
+expect nothing
+recho "$@"$xxx
+
+expect '<>'
+recho $xxx""
+expect '<>'
+recho $xxx''
+expect '<>'
+recho ''$xxx
+expect '<>'
+recho ""$xxx
+
+AB='abcdefghijklmnopqrstuvwxyz'
+
+recho ${AB:7:15}
+recho ${AB:15:7}
+
+recho ${AB:20}
+
+recho ${AB:0}
+recho ${AB:0:20}
+
+recho ${AB:10:7}
+recho ${AB:10:3+4}
+recho ${AB:20/2:3+4}
+
+set 1 2 3 4 5 6
+recho \""${*:2:2}"\"
+
+IFS=:
+recho \""${*:2:2}"\"
+
+IFS=$' \t\n'
+
+z=123456
+
+recho \""${z:2:2}"\"
+recho \""${z:2}"\"
+recho \""${z:2:4}"\"
+recho \""${z:2:6}"\"
+
+set $'\1' $'\2' $'\177'
+
+recho $*
+recho $@
+
+recho ${*}
+recho ${@}
+
+xx=one/two/two
+recho ${xx%/*}
+recho ${xx/\/two}
+
+yy=oneonetwo
+recho ${yy//one}
+recho ${yy/\/one}
+
+xx=oneonetwo
+
+recho ${xx/one}
+recho ${xx//one}
+recho ${xx/\/one}
+
+# out-of-range substrings
+var=abc
+c=${var:3}
+expect nothing
+recho $c
+c=${var:4}
+expect nothing
+recho $c
+# as of bash-4.2, negative LENGTH means offset from the end
+c=${var:0:-2}
+expect '<a>'
+recho $c
+
+var=abcdefghi
+c=${var:3:12}
+recho $c
+c=${var:4:20}
+recho $c
+
+# make sure null patterns work
+xxx=endocrine
+yyy=n
+unset zzz
+
+recho ${xxx/$yyy/*}
+recho ${xxx//$yyy/*}
+
+recho ${xxx/$zzz/*}
+recho ${xxx//$zzz/*}
+
+recho ${xxx//%${zzz}/}
+recho ${xxx//%${zzz}}
+recho ${xxx//#${zzz}/}
+recho ${xxx//#${zzz}}
+
+# make sure null strings are replaced appropriately
+unset var
+var=
+echo "${var/#/x}"
+echo "${var/*/x}"
+echo "${var//*/x}"
+
+var=abc
+echo "${var/#/x}"
+echo "${var/*/x}"
+echo "${var//*/x}"
+unset var
+
+# another case that caused a core dump in bash-2.0
+XPATH=/usr/bin:/bin:/usr/local/bin:/usr/gnu/bin::/usr/bin/X11:/sbin:/usr/sbin
+
+recho ${XPATH//:/ }
+
+xx=(ar as at au av aw ax ay az)
+
+recho ${xx[@]/a/}
+recho ${xx[@]//a/}
+
+recho ${xx[*]/a/}
+recho ${xx[*]//a/}
+
+recho ${xx[@]%?}
+recho ${xx[*]%?}
+
+recho ${xx[@]#?}
+recho ${xx[*]#?}
+
+set -- ar as at au av aw ax ay az
+
+recho ${@/a/}
+recho ${@//a/}
+
+recho ${*/a/}
+recho ${*//a/}
+
+recho ${@%?}
+recho ${*%?}
+
+recho ${@#?}
+recho ${*#?}
+
+shift ${#}
+set -u
+( recho $9 ; echo after 1)
+( recho ${9} ; echo after 2)
+( recho $UNSET ; echo after 3)
+( recho ${UNSET} ; echo after 4)
+( recho "$UNSET" ; echo after 5)
+( recho "${UNSET}" ; echo after 6)
+( recho "${#UNSET}" ; echo after 7)
+set +u
+
+RECEIVED="12345"
+recho "${RECEIVED:$((${#RECEIVED}-1)):1}"
+RECEIVED="12345#"
+recho "${RECEIVED:$((${#RECEIVED}-1)):1}"
+RECEIVED="#"
+recho "${RECEIVED:$((${#RECEIVED}-1)):1}"
+RECEIVED=""
+recho "${RECEIVED:$((${#RECEIVED}-1)):1}"
+
+# tests of new prefix expansion ${!prefix*}
+${THIS_SH} ./new-exp3.sub
+
+# bug with indirect expansion through bash-2.05b
+${THIS_SH} ./new-exp4.sub
+
+# these caused errors and core dumps in versions before bash-2.04
+c=""
+echo ${c//${$(($#-1))}/x/}
+
+set a b c d e f g
+recho "$@"
+
+set -- ${@:1:$(($# - 2))}
+recho "$@"
+
+set a b
+recho ${@:1:$(($# - 2))}
+
+recho ${@:1:0}
+recho ${@:1:1}
+recho ${@:1:2}
+
+recho "${*:1:0}"
+
+# this is an error -- negative expression
+set a
+recho ${@:1:$(($# - 2))}
+set a b c d e
+recho ${@: -3:-2}
+
+XPATH=/bin:/usr/bin:/usr/ucb:/usr/local/bin:.:/sbin:/usr/sbin
+set $( IFS=: ; echo $XPATH ) 
+
+recho ${@##*/}
+recho ${@%%[!/]*}
+
+recho ${@#/*}
+recho ${@%*/}
+
+set /full/path/to/x16 /another/full/path
+
+recho ${1%/*}
+recho ${1%%[!/]*}
+recho ${1#*/}
+recho ${1##*/}
+
+${THIS_SH} ./new-exp5.sub
+
+unset var
+var=blah
+
+# these had better agree
+echo ${var[@]:3}
+echo ${var:3}
+echo ${var[@]/#/--}
+echo ${var/#/--}
+echo ${var[@]##?}
+echo ${var##?}
+
+unset var
+var=(abcde abcfg abchi)
+
+# problems with anchoring pattern replacements
+echo ${var[*]//#abc/foo}
+echo ${var[*]/#abc/foo}
+unset var
+
+${THIS_SH} ./new-exp6.sub
+
+${THIS_SH} ./new-exp7.sub
+
+${THIS_SH} ./new-exp8.sub
+
+# tests to check whether things like indirect expansion of a variable whose
+# value is 'anothervar[@]' stop working
+${THIS_SH} ./new-exp9.sub
+
+# new parameter transformation `@' expansion operator
+${THIS_SH} ./new-exp10.sub
+
+# parameter substring replacement and removal operators with multibyte chars
+${THIS_SH} ./new-exp11.sub
+
+# indirect expansion with arrays and local variables
+${THIS_SH} ./new-exp12.sub
+
+# more indirect expansion and parameter transformation issues
+${THIS_SH} ./new-exp13.sub
+
+# new K parameter transformation operator
+${THIS_SH} ./new-exp14.sub
+
+# ongoing work with a/A parameter transformations and `nounset'
+${THIS_SH} ./new-exp15.sub
+
+# problems with stray CTLNUL in bash-4.0-alpha
+unset a
+a=/a
+recho "/${a%/*}"
+recho "/${a///a/}"
+
+patfunc()
+{
+	echo ${1##*"${1##*}"}
+}
+patfunc foo
+
+# caused core dumps because of bad bracket expression parsing in bash-5.0
+eval : $'${x/#[0\xef\xbf\xbd\\Z[:]]}'
+
+expect $0: 'ABXD: parameter unset'
+${THIS_SH} -c 'recho ${ABXD:?"parameter unset"}' $0
diff --git a/tests/new-exp1.sub b/tests/new-exp1.sub
new file mode 100644
index 0000000..d29b93c
--- /dev/null
+++ b/tests/new-exp1.sub
@@ -0,0 +1,29 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+FN=${TMPDIR}/bashtest-$$
+expect()
+{
+        echo expect "$@"
+}
+
+expect this is a test of proc subst
+cat <(echo this is a test of proc subst)
+echo this is test 2 > $FN
+expect this is test 2
+cat <(cat $FN)
+rm -f $FN
+
+foo=
+expect a
+cat ${foo:-<(echo a)}
diff --git a/tests/new-exp10.sub b/tests/new-exp10.sub
new file mode 100644
index 0000000..bf9ebe7
--- /dev/null
+++ b/tests/new-exp10.sub
@@ -0,0 +1,113 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# new framework for parameter transformations, post bash-4.3
+
+printf "<%s>" "${x@Q}" ; echo
+printf "<%s>" "${x@E}" ; echo
+printf "<%s>" "${x@P}" ; echo
+printf "<%s>" "${x@A}" ; echo
+
+x="ab 'cd' ef"
+printf "<%s> " "${x@Q}" ; echo 
+
+printf "<%s>" "${x@C}"
+
+# if unquoted, normal word splitting happens
+set -- ab 'cd ef' '' gh
+printf "<%s> " "${@@Q}" ; echo
+printf "<%s> " "${*@Q}" ; echo
+printf "<%s> " ${@@Q} ; echo
+printf "<%s> " ${*@Q} ; echo
+
+y[0]=4
+y[1]='ab cd'
+
+printf "<%s> " "${y[1]@Q}" ; echo
+printf "<%s> " "${y[@]@Q}" ; echo	# mksh doesn't like @ or * or arrays subscripted with them
+
+printf "<%s> " "${z@Q}"	; echo	# empty string?
+
+recho ${z@Q}		# this disappears
+
+#
+HOST=host
+SHELL_LEVEL=2
+NPS1='\[\]${HOST}($SHELL_LEVEL)[\v]\$ '
+
+recho "${NPS1@P}"
+
+#
+D=' \t\n'
+printf "<%s>" "${D@E}" ; echo
+printf "<%s>" "${D@Q}" ; echo
+
+E=$' \t\n'
+printf "<%s>" "${E@E}" ; echo
+printf "<%s>" "${E@Q}" ; echo
+
+declare x
+declare -r x="ab 'cd' ef"
+printf "%s" "${x@A}" ; echo 
+
+set -- ab 'cd ef' '' gh
+printf "%s " "${@@A}" ; echo
+
+A=( "$@" )
+printf "%s " "${A[@]@A}" ; echo
+B=()
+printf "%s " "${B[@]@A}" ; echo
+
+unset A
+declare -A A
+A=( [one]=1 [two]='b c' [three]='' [four]=de )
+printf "%s " "${A[@]@A}" ; echo
+
+unset X
+declare X
+declare -r X="ab 'cd' ef"
+printf "%s" "${X@a}" ; echo 
+
+set -- 1 2 3 4
+
+unset A
+A=( "$@" )
+printf "%s " "${A@a}" ; echo
+
+unset A
+declare -A A
+A=( [one]=1 [two]='b c' [three]='' [four]=de )
+printf "%s " "${A@a}" ; echo
+
+declare -ir Y=0
+printf "%s" "${Y@a}" ; echo 
+
+# make sure we still handle ${#@} and ${@} as posix requires
+set -- a b c d e
+echo ${@}
+echo ${#@}
+echo a${#@}b
+
+# new feature in bash-5.0: display attributes of even unset variables
+unset -v foo
+
+declare -i foo
+echo ${foo@a}
+
+declare -p foo
+
+unset foo
+declare -A foo
+echo ${foo@a}
+
+declare -p foo
diff --git a/tests/new-exp11.sub b/tests/new-exp11.sub
new file mode 100644
index 0000000..6a9edd5
--- /dev/null
+++ b/tests/new-exp11.sub
@@ -0,0 +1,59 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# pattern matching and replacement operators with multibyte characters
+
+LANG=en_US.UTF-8
+
+s1='abcådef'
+s2='Ã¥'
+s3='ḅć'
+
+s23=${s2}${s3}
+
+echo ${s1/$s2/xxx}
+echo ${s1/$s3/xxx}
+
+echo ${s23/#$s2/}
+echo ${s23/%$s3/}
+
+echo ${s23/#$s2/prepend}
+echo ${s23/%$s3/append}
+
+echo ${s2/#/prepend}
+echo ${s3/%/append}
+
+echo ${s2/#/}
+echo ${s3/%/}
+
+recho ${s2/$s2/}
+recho ${s3/$s3/}
+
+# posix pattern replacements
+
+echo ${s23##$s2}
+echo ${s23#$s2}
+
+echo ${s23%%$s3}
+echo ${s23%$s3}
+
+# fail
+
+echo ${s2/#ab/xx}
+echo ${s3/%ab/xx}
+
+echo ${s2#ab}
+echo ${s2##ab}
+
+echo ${s3%ab}
+echo ${s3%%ab}
diff --git a/tests/new-exp12.sub b/tests/new-exp12.sub
new file mode 100644
index 0000000..1fbd5d6
--- /dev/null
+++ b/tests/new-exp12.sub
@@ -0,0 +1,40 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+#
+# make sure indirect expansion for arrays uses the closest-scope instance
+# of the resulting variable name
+
+array_1=("PASS")
+array_2=("1 foo" "2 foo")
+
+unsafe_fn ()
+{
+    local array_1=('HELLO')
+    local a=("${!1}") b=("${!2}")
+    printf '%s;' "${a[@]}" "${b[@]}"
+    printf '\n'
+}
+
+safe_fn ()
+{
+    local a=("${!1}") b=("${!2}")
+    local array_1=('FAIL')
+    printf '%s;' "${a[@]}" "${b[@]}"
+    printf '\n'
+}
+
+unsafe_fn 'array_1[@]' 'array_2[@]'
+safe_fn 'array_1[@]' 'array_2[@]'
+
+echo after: ${array_1[@]}
diff --git a/tests/new-exp13.sub b/tests/new-exp13.sub
new file mode 100644
index 0000000..7e8ed32
--- /dev/null
+++ b/tests/new-exp13.sub
@@ -0,0 +1,72 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+declare -lr VAR1
+declare -lr VAR2=zzz
+declare -alr VAR3
+
+var=VAR2
+
+echo ${!var@Q}
+echo ${VAR2@Q}
+
+echo ${VAR1@A}
+echo ${VAR1[@]@A}
+echo "${VAR1@A}"
+echo "${VAR1[@]@A}"
+
+echo "${VAR1[@]@a}"
+echo ${VAR1[@]@a}
+echo "${VAR1@a}"
+echo ${VAR1@a}
+
+echo ${VAR3@A}
+echo ${VAR3[@]@A}
+echo "${VAR3@A}"
+echo "${VAR3[@]@A}"
+
+echo "${VAR3[@]@a}"
+echo ${VAR3[@]@a}
+echo "${VAR3@a}"
+echo ${VAR3@a}
+
+var=one
+
+echo ${var}
+echo ${var[@]}
+
+VAR4=(aaa bbb)
+
+varname=VAR4
+
+echo ${!varname[@]@Q}
+
+echo ${VAR4[@]@Q}
+echo ${!VAR4[@]@Q}
+
+echo ${VAR4[@]}
+echo ${!VAR4[@]}
+
+VAR5=(aaa bbb)
+varname="VAR5[@]"
+
+echo "${VAR5@Q}"
+echo "${VAR5[@]@Q}"
+
+echo "${!varname@Q}"
+echo "${!varname[@]@Q}"
+
+# caused core dumps through bash-5.0
+echo "${!varname##aa}"
+echo "${!varname[@]%b}"
diff --git a/tests/new-exp14.sub b/tests/new-exp14.sub
new file mode 100644
index 0000000..b8bda8d
--- /dev/null
+++ b/tests/new-exp14.sub
@@ -0,0 +1,19 @@
+# test the other uses of the 'K' tranform operator
+# the associative array tests are performed separately, since that was the
+# original motivation for this feature
+foo=string
+bar='value with spaces'
+
+set -- 'a b' 'c d' 'e f'
+
+echo ${foo@K}
+echo ${bar@K}
+
+echo ${@@K}
+echo "${@@K}"
+
+foo=( zero one two three )
+echo ${foo[@]@K}
+
+foo=( 'zero z' 'one o' 'two t' 'three t' )
+echo ${foo[@]@K}
diff --git a/tests/new-exp15.sub b/tests/new-exp15.sub
new file mode 100644
index 0000000..f8b9ed8
--- /dev/null
+++ b/tests/new-exp15.sub
@@ -0,0 +1,29 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+: ${THIS_SH:=./bash}
+
+${THIS_SH} -c 'declare -a foo=() ; declare -p foo' bash
+
+${THIS_SH} -c 'declare -ia foo=() ; echo ${foo@a} ; echo ${foo@A}' bash
+${THIS_SH} -uc 'declare -ia foo=() ; echo ${foo@a} ; echo ${foo@A}' bash
+
+${THIS_SH} -c 'declare -ia foo=() ; bar=foo; echo ${!bar@a} ; echo ${!bar@A}' bash
+${THIS_SH} -uc 'declare -ia foo=() ; bar=foo; echo ${!bar@a} ; echo ${!bar@A}' bash
+
+${THIS_SH} -c 'declare -a foo=( [1]=one ) ; echo ${foo@a}' bash
+${THIS_SH} -uc 'declare -a foo=( [1]=one ) ; echo ${foo@a}' bash
+
+${THIS_SH} -c 'declare -a foo=( [1]=one ) ; bar=foo; echo ${!bar@a}' bash
+${THIS_SH} -uc 'declare -a foo=( [1]=one ) ; bar=foo; echo ${!bar@a}' bash
diff --git a/tests/new-exp2.sub b/tests/new-exp2.sub
new file mode 100644
index 0000000..8dfe788
--- /dev/null
+++ b/tests/new-exp2.sub
@@ -0,0 +1,62 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+export LC_ALL=C
+export LANG=C
+
+# test out the new $(< filename) code
+# it should be exactly equivalent to $(cat filename)
+
+FILENAME=$TMPDIR/bashtmp.x$$
+
+trap 'rm -f $FILENAME' 0
+
+cat >$FILENAME << EOF
+line 1
+line 2
+line 3
+EOF
+
+LINES1=$(cat $FILENAME)
+LINES2=$(< $FILENAME)
+
+if [[ $LINES1 != $LINES2 ]]; then
+	echo 'whoops: $(< filename) failed'
+fi
+
+LINES2=$(< $TMPDIR/bashtmp.x*)
+if [[ $LINES1 != $LINES2 ]]; then
+	echo 'whoops: $(< filename) with glob expansion failed'
+fi
+
+# but the glob expansion in the redirection should fail in posix mode
+set -o posix
+exec 3>&2
+exec 2>/dev/null
+LINES2=$(< $TMPDIR/bashtmp.x*)
+exec 2>&3
+if [[ $LINES2 -gt 0 ]]; then
+	echo "whoops: redirection glob expansion should be disabled in posix mode" >&2
+fi
+set +o posix
+
+# now see what happens when we try it with a non-existent file
+rm -f /tmp/redir-notthere
+LINES3=$(< /tmp/redir-notthere)
+echo $?
+
+# These were bugs through bash-4.2
+{ : "$({xxxxxxxxxxxxxxxxxxxx}</dev/stdin)"; } <<<'hi'
+echo ${xxxxxxxxxxxxxxxxxxxx}
+
+{ echo "$(1111111111111111111111</dev/stdin)"; } <<<'hi'
diff --git a/tests/new-exp3.sub b/tests/new-exp3.sub
new file mode 100644
index 0000000..a0c6586
--- /dev/null
+++ b/tests/new-exp3.sub
@@ -0,0 +1,43 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+:
+# Set up some dummy variables beginning with _Q
+_QUANTITY=
+_QUOTA=
+_QUOTE=
+_QUILL=
+_QUEST=
+_QUART=
+
+recho ${!_Q*}
+recho ${!_Q@}		# compatibility
+
+IFS="-$IFS"
+
+recho ${!_Q*}
+recho "${!_Q*}"
+
+recho ${!_Q@}
+recho "${!_Q@}"
+
+recho ${!_Y*}
+
+recho "${!_Q* }"
+
+IFS=$' \t\n'
+
+set a b c d e f g h i j k l m n o p
+recho ${!1*}
+
+recho ${!@*}
diff --git a/tests/new-exp4.sub b/tests/new-exp4.sub
new file mode 100644
index 0000000..e491f5c
--- /dev/null
+++ b/tests/new-exp4.sub
@@ -0,0 +1,43 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+arrayA=("A" "B" "C")
+
+arrayB=(  ${arrayA[*]}  )
+echo "Case01---${#arrayB[*]}---${arrayB[0]}:${arrayB[1]}:${arrayB[2]}---"
+
+arrayB=( "${arrayA[*]}" )
+echo "Case02---${#arrayB[*]}---${arrayB[0]}:${arrayB[1]}:${arrayB[2]}---"
+
+arrayB=(  ${arrayA[@]}  )
+echo "Case03---${#arrayB[@]}---${arrayB[0]}:${arrayB[1]}:${arrayB[2]}---"
+
+arrayB=( "${arrayA[@]}" )
+echo "Case04---${#arrayB[@]}---${arrayB[0]}:${arrayB[1]}:${arrayB[2]}---"
+
+xx="arrayA[*]"
+
+arrayB=(  ${!xx}  )
+echo "Case05---${#arrayB[*]}---${arrayB[0]}:${arrayB[1]}:${arrayB[2]}---"
+
+arrayB=( "${!xx}" )
+echo "Case06---${#arrayB[*]}---${arrayB[0]}:${arrayB[1]}:${arrayB[2]}---"
+
+xx="arrayA[@]"
+
+arrayB=(  ${!xx}  )
+echo "Case07---${#arrayB[@]}---${arrayB[0]}:${arrayB[1]}:${arrayB[2]}---"
+
+arrayB=( "${!xx}" )
+echo "Case08---${#arrayB[@]}---${arrayB[0]}:${arrayB[1]}:${arrayB[2]}---"
diff --git a/tests/new-exp5.sub b/tests/new-exp5.sub
new file mode 100644
index 0000000..cb203a7
--- /dev/null
+++ b/tests/new-exp5.sub
@@ -0,0 +1,53 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+x=(one two)
+echo ${x[@]:1}
+echo ${x[@]:0:1}
+
+x=(one)
+echo ${x[0]:1}
+echo ${x[0]:0}
+echo ${x[@]:1}
+echo ${x[@]:0}
+
+echo ${x[@]: -1}
+echo ${x[@]: ${#x[@]}-1}
+
+x=(0 1 2 3 4 5 6 7 8 9)
+echo ${x[@]:1}
+
+echo ${x[@]: -1}
+echo ${x[@]: ${#x[@]}-1}
+
+set -- ${x[@]}
+
+echo $1
+echo ${@: -1}
+echo ${@: $#-1}
+
+a=0123456789
+
+echo ${a:1}
+echo ${a: -1}
+echo ${a: ${#a}-1}
+
+# problem with bash through 3.2.33
+oIFS="$IFS"
+IFS=$'\n'
+a=(A B C D)
+b=("${a[@]}")
+echo "${#b[@]}", "${b[@]}"  # 4, A B C D -- OK
+b=("${a[@]:2}")
+echo "${#b[@]}", "${b[@]}"  # 1, C D -- bug, should be 2, C D 
+IFS="$oIFS"
diff --git a/tests/new-exp6.sub b/tests/new-exp6.sub
new file mode 100644
index 0000000..83b041a
--- /dev/null
+++ b/tests/new-exp6.sub
@@ -0,0 +1,42 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# quoted null problems in versions of bash prior to 3.2
+
+str='12'
+snul=$'\177'
+
+recho "${str:2}"
+recho "+${str:2}"
+recho "+${snul:0:1}"
+recho  "+""${str:2}"
+
+recho "${str/?/$snul}"
+recho ${str/?/$snul}
+
+recho "${snul/x/y}"
+recho ${snul/x/y}
+
+recho "${snul/$snul/}"
+recho "${str/$str/}"
+
+recho "${snul##$snul}"
+recho "${str##$str}"
+recho "${str##$nul}"
+
+A=""
+B="${A:0}"
+
+recho "$B"
+recho "${A:0}"
+recho "/tmp/test/TEST${A:0}"
diff --git a/tests/new-exp7.sub b/tests/new-exp7.sub
new file mode 100644
index 0000000..970475c
--- /dev/null
+++ b/tests/new-exp7.sub
@@ -0,0 +1,13 @@
+foo()
+{
+	echo < <(cat x1)
+}
+
+type foo
+
+declare -f foo
+
+echo $(declare -f foo | sed 's:foo:bar:')
+eval "$(declare -f foo | sed 's:foo:bar:')"
+
+type bar
diff --git a/tests/new-exp8.sub b/tests/new-exp8.sub
new file mode 100644
index 0000000..9effec5
--- /dev/null
+++ b/tests/new-exp8.sub
@@ -0,0 +1,129 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+pat1='str'
+pat2='[^;]'
+pat3='[[:alnum:]_]'
+pat4='[[:alnum:]][[fu]b'
+pat5='?tr'
+pat6='?tr\'
+pat7='[[:alnum:]]_'
+pat8='*tr'
+
+declare z="start"
+declare NUM=1000
+
+#----------------------------------
+# create a long string with ';'
+#----------------------------------
+for ((i=0; i<$NUM; i++)); do
+    z="$z;string$i"
+done
+
+#z="$z;string;foo"
+
+#------------------------------
+# delete everything except ';'
+#------------------------------
+
+# try different patterns here
+x="${z//$pat1}"
+echo $x
+x="${z//$pat2}"
+echo $x
+x="${z//$pat3}"
+echo $x
+x="${z//$pat4}"
+echo $x
+x="${z//$pat5}"
+echo $x
+x="${z//$pat6}"
+echo $x
+x="${z//$pat7}"
+echo $x
+x="${z//$pat8}"
+echo $x
+
+
+declare z="start"
+declare NUM=1000
+
+#----------------------------------
+# create a long string with ';'
+#----------------------------------
+for ((i=0; i<$NUM; i++)); do
+    z="$z;string$i"
+done
+
+#z="$z;string;foo"
+
+#------------------------------
+# delete everything except ';'
+#------------------------------
+
+# try different patterns here
+x="${z//[^;]}"
+echo $x
+x="${z/#[^;][^;]}"
+echo $x
+x="${z/%[^;][^;]}"
+echo $x
+
+export LANG=C LC_ALL=C LC_CTYPE=C
+
+# try different patterns here
+x="${z//$pat1}"
+echo $x
+x="${z//$pat2}"
+echo $x
+x="${z//$pat3}"
+echo $x
+x="${z//$pat4}"
+echo $x
+x="${z//$pat5}"
+echo $x
+x="${z//$pat6}"
+echo $x
+x="${z//$pat7}"
+echo $x
+x="${z//$pat8}"
+echo $x
+
+# try different patterns here
+x="${z//[^;]}"
+echo $x
+x="${z/#[^;][^;]}"
+echo $x
+x="${z/%[^;][^;]}"
+echo $x
+
+# post-bash-4.3 changes to make pattern replacement honor nocasematch variable
+unset string
+string=abcd
+
+shopt -s nocasematch
+
+echo ${string//A/z}
+echo ${string//BC/x}
+echo ${string//[BC]/x}
+echo ${string//[bC]/x}
+echo ${string//?/z}
+
+LC_ALL=C
+echo ${string//A/z}
+echo ${string//BC/x}
+echo ${string//[BC]/x}
+echo ${string//[bC]/x}
+echo ${string//?/z}
+
+
diff --git a/tests/new-exp9.sub b/tests/new-exp9.sub
new file mode 100644
index 0000000..799f192
--- /dev/null
+++ b/tests/new-exp9.sub
@@ -0,0 +1,44 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+indirarray()
+{
+   local intermediary
+   local sub
+
+   intermediary="${1}[@]"
+   local -a leftValue=("${!intermediary}")
+
+   local -a leftSub
+   eval leftSub=(\"\${!${1}[@]}\")
+
+   echo "$1" Value = ${leftValue[@]}
+   echo "$1" Sub = ${leftSub[@]}
+}
+
+a=(1 2 3 4 5)
+b=(a b c d e)
+
+c=([0]=10 [2]=20 [4]=40 [8]=80)
+
+indirarray a
+indirarray b
+indirarray c
+
+ref=a
+tmp="$ref[@]"
+printf "<%s> " "${!tmp}"; echo    # Iterate whole array.
+
+ref=c
+tmp="$ref[@]"
+printf "<%s> " "${!tmp}"; echo    # Iterate whole array.
diff --git a/tests/nquote.right b/tests/nquote.right
new file mode 100644
index 0000000..e3ae555
--- /dev/null
+++ b/tests/nquote.right
@@ -0,0 +1,64 @@
+argv[1] = <^J^J^J>
+argv[1] = <++^J++>
+argv[1] = <>
+argv[1] = <^J^I >
+argv[1] = <abc>
+argv[1] = <^M^[^Gabc>
+argv[1] = <hello,>
+argv[2] = <world>
+argv[1] = <hello, world>
+argv[1] = <>
+argv[1] = <$hello, world>
+argv[1] = <hello, $world>
+argv[1] = <hello, "world">
+argv[1] = <hello, $"world">
+argv[1] = <hello, $"world">
+argv[1] = <$hello, chet>
+argv[1] = <hello, chet>
+ok
+'abcd'
+'abcd'
+\'abcd\'
+\'abcd\'
+argv[1] = <A\CB>
+argv[1] = <A\CB>
+argv[1] = <ab$cde>
+A\CB
+A\CB
+A\CB
+argv[1] = <hello, $"world">
+argv[1] = <hello, \$"world">
+argv[1] = <hello, $"world">
+argv[1] = <hello, $world>
+1
+1
+;foo
+argv[1] = <^I>
+argv[1] = <'A^IB'>
+hello' world
+hello world!
+hello' world!
+'  |  '
+'  |  '
+x  |  x
+x  |  x
+'  |  '
+'  |  '
+'  |  '
+'  |  '
+'  |  '
+'  |  '
+x  |  x
+'
+$'\''
+'
+'abcd'
+$'\'abcd\''
+'
+1
+argv[1] = <^?>
+0000000 del nl
+0000002
+0000000 esc fs gs rs us del nl
+0000007
+\q
diff --git a/tests/nquote.tests b/tests/nquote.tests
new file mode 100644
index 0000000..20d6415
--- /dev/null
+++ b/tests/nquote.tests
@@ -0,0 +1,133 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+expect()
+{
+        echo expect "$@"
+}
+
+expect '<^J^J^J>'
+recho $'\n\n\n'
+
+expect '<++^J++>'
+f=$'\n'
+recho "++$f++"
+unset f
+
+z1=$''
+expect '<>'
+recho "$z1"
+
+ZIFS=$'\n'$'\t'$' '
+
+expect '<^J^I >'
+recho "$ZIFS"
+
+expect '<abc>'
+recho $'abc'
+
+expect '<^M^[^Gabc>'
+recho $'\r\e\aabc'
+
+D=$"hello"," "$"world"
+
+expect '<hello,> <world>'
+recho $D
+
+expect '<hello, world>'
+recho "$D"
+
+D=$""
+expect '<>'
+recho "$D"
+
+world=chet
+
+expect '<$hello, world>'
+recho \$"hello, world"
+
+expect '<hello, $world>'
+recho $"hello, \$world"
+
+expect '<hello, "world">'
+recho $"hello, \"world\""
+
+expect '<hello, $"world">'
+recho $"hello"', $"world"'
+
+expect '<hello, $"world">'
+recho $'hello, $"world"'
+
+expect '<$hello, chet>'
+recho \$"hello, $world"
+
+expect '<hello, chet>'
+recho $"hello, $world"
+
+z=$'\v\f\a\b'
+case "$z" in
+$'\v\f\a\b')	echo ok;;
+*)		echo bad;;
+esac
+
+# Dave Korn says this should be allowed and echo 'abcd'
+echo $'\'abcd\''
+
+# printf translates \' to ' ...
+printf "\'abcd\'\n"
+
+# but echo -e doesn't
+echo -e "\'abcd\'"
+echo -e "\\'abcd\\'"
+
+# and what do we do about unrecognized escape sequences?
+
+shopt -s xpg_echo
+
+recho $'A\CB'
+
+recho "A\CB"
+
+cde=c
+recho $'ab$cde'
+
+printf "%b\n" 'A\CB'
+printf 'A\CB\n'
+
+echo 'A\CB'
+
+world=chet
+
+recho $'hello, $"world"'
+recho $'hello, \$"world"'
+recho $'hello, $\"world"'
+
+recho "hello, $"world""
+
+# ansi quoting inside double-quoted command subst - bash-3.1 bug
+echo $(set -- $'a b'; echo $#)
+echo "$(set -- $'a b'; echo $#)"
+
+echo "$(echo $';foo')"
+
+args ()
+{
+ for a in "$@";do echo "'$a'";done
+}
+unset mytab
+recho "${mytab:-$'\t'}"
+recho "$( args $'A\tB' )"
+
+${THIS_SH} ./nquote1.sub
+${THIS_SH} ./nquote2.sub
+${THIS_SH} ./nquote3.sub
diff --git a/tests/nquote1.right b/tests/nquote1.right
new file mode 100644
index 0000000..45389ef
--- /dev/null
+++ b/tests/nquote1.right
@@ -0,0 +1,131 @@
+argv[1] = <a>
+argv[2] = <a^Ab>
+argv[3] = <3>
+argv[1] = <1>
+argv[2] = <a^Ab>
+argv[3] = <3>
+argv[1] = <b>
+argv[2] = <a^Ab>
+argv[3] = <3>
+argv[1] = <c>
+argv[2] = <a^Ab>
+argv[3] = <3>
+argv[1] = <d>
+argv[2] = <a^Ab>
+argv[3] = <3>
+argv[1] = <a>
+argv[2] = <a^Ab>
+argv[3] = <3>
+argv[1] = <1>
+argv[2] = <a^Ab>
+argv[3] = <3>
+argv[1] = <b>
+argv[2] = <a^Ab>
+argv[3] = <3>
+argv[1] = <c>
+argv[2] = <a^Ab>
+argv[3] = <3>
+argv[1] = <d>
+argv[2] = <a^Ab>
+argv[3] = <3>
+argv[1] = <a>
+argv[2] = <a^Ab>
+argv[3] = <3>
+argv[1] = <1>
+argv[2] = <a^Ab>
+argv[3] = <3>
+argv[1] = <b>
+argv[2] = <a^Ab>
+argv[3] = <3>
+argv[1] = <c>
+argv[2] = <a^Ab>
+argv[3] = <3>
+argv[1] = <d>
+argv[2] = <a^Ab>
+argv[3] = <3>
+argv[1] = <a>
+argv[2] = <a^Ab>
+argv[3] = <3>
+argv[1] = <1>
+argv[2] = <a^Ab>
+argv[3] = <3>
+argv[1] = <b>
+argv[2] = <a^Ab>
+argv[3] = <3>
+argv[1] = <c>
+argv[2] = <a^Ab>
+argv[3] = <3>
+argv[1] = <d>
+argv[2] = <a^Ab>
+argv[3] = <3>
+argv[1] = <e1>
+argv[2] = <v^A^A>
+argv[1] = <e2>
+argv[2] = <v^A^A>
+argv[1] = <e3>
+argv[2] = <v^A^A>
+argv[1] = <e4>
+argv[2] = <v^A^A>
+argv[1] = <a1>
+argv[2] = <uv^A^A>
+argv[1] = <a2>
+argv[2] = <uv^A^A>
+argv[1] = <a3>
+argv[2] = <uv^A^Awx>
+argv[3] = <uv^A^Awx>
+argv[1] = <a4>
+argv[2] = <uv^A^Awx>
+argv[3] = <uv^A^Awx>
+argv[1] = <p1>
+argv[2] = <uv^A^Awx>
+argv[3] = <uv^A^Awx>
+argv[1] = <p2>
+argv[2] = <uv^A^Awx>
+argv[3] = <uv^A^Awx>
+argv[1] = <p1>
+argv[2] = <uv^A^Awx>
+argv[3] = <uv^A^Awx>
+argv[1] = <p2>
+argv[2] = <uv^A^Awx uv^A^Awx>
+argv[1] = <uv^A^Awx>
+argv[1] = <uv^A^Awx>
+argv[1] = <uv^A^Awx>
+^A
+^A
+^B
+argv[1] = <f1>
+argv[2] = <v^Aw>
+argv[1] = <f2>
+argv[2] = <v^Aw>
+argv[1] = <a1>
+argv[2] = <uv^Aw>
+argv[1] = <a2>
+argv[2] = <uv^Aw>
+argv[1] = <a3>
+argv[2] = <uv^Aw>
+argv[1] = <a4>
+argv[2] = <uv^Aw>
+argv[1] = <e1>
+argv[2] = <uv^Aw>
+argv[1] = <e2>
+argv[2] = <uv^Aw>
+argv[1] = <d1>
+argv[2] = <^Aw>
+argv[1] = <d2>
+argv[2] = <^Aw>
+argv[1] = <@1>
+argv[2] = <uv^Aw^Axy>
+argv[3] = <uv^Aw^Axy>
+argv[1] = <@2>
+argv[2] = <uv^Aw^Axy>
+argv[3] = <uv^Aw^Axy>
+argv[1] = <aa1>
+argv[2] = <uv^A^A>
+argv[1] = <aa2>
+argv[2] = <uv^A^A>
+argv[1] = <aa3>
+argv[2] = <uv^A^Awx>
+argv[3] = <uv^A^Awx>
+argv[1] = <aa4>
+argv[2] = <uv^A^Awx>
+argv[3] = <uv^A^Awx>
diff --git a/tests/nquote1.sub b/tests/nquote1.sub
new file mode 100644
index 0000000..b3bc0db
--- /dev/null
+++ b/tests/nquote1.sub
@@ -0,0 +1,6 @@
+set -o history
+set -H
+
+echo $'hello\' world'
+echo $'hello world!'
+echo $'hello\' world!'
diff --git a/tests/nquote1.tests b/tests/nquote1.tests
new file mode 100644
index 0000000..679976c
--- /dev/null
+++ b/tests/nquote1.tests
@@ -0,0 +1,119 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+a=$'a\001b'
+
+set $a
+
+b=$a
+c=$1
+d="$1"
+
+e=$'uv\001\001wx'
+
+recho a $a ${#a}
+recho 1 $1 ${#1}
+recho b $b ${#b}
+recho c $c ${#c}
+recho d $d ${#d}
+
+recho a ${a} ${#a}
+recho 1 ${1} ${#1}
+recho b ${b} ${#b}
+recho c ${c} ${#c}
+recho d ${d} ${#d}
+
+recho a "$a" ${#a}
+recho 1 "$1" ${#1}
+recho b "$b" ${#b}
+recho c "$c" ${#c}
+recho d "$d" ${#d}
+
+recho a "${a}" ${#a}
+recho 1 "${1}" ${#1}
+recho b "${b}" ${#b}
+recho c "${c}" ${#c}
+recho d "${d}" ${#d}
+
+set $e
+
+recho e1 ${e:1:3}
+recho e2 "${e:1:3}"
+recho e3 ${1:1:3}
+recho e4 "${1:1:3}"
+
+arr[0]=$e
+arr[1]=$e
+
+recho a1 ${arr:0:4}
+recho a2 "${arr:0:4}"
+
+recho a3 ${arr[@]:0:2}
+recho a4 "${arr[@]:0:2}"
+
+set $e $e
+
+recho p1 ${@:1:2}
+recho p2 "${@:1:2}"
+
+recho p1 ${*:1:2}
+recho p2 "${*:1:2}"
+
+recho $e
+
+recho 'uv

wx'
+
+f='uv

wx'
+
+recho $f
+
+echo -en "\01" | cat -v
+echo
+
+huhu() { echo "$1"; };
+
+huhu $(echo -en "\01") | cat -v
+huhu $(echo -en "\02") | cat -v
+
+f=$'uv\001w\001xy'
+
+set $f $f
+
+recho f1 ${f:1:3}
+recho f2 "${f:1:3}"
+
+arr[0]=$f
+arr[1]=$f
+
+recho a1 ${arr:0:4}
+recho a2 "${arr:0:4}"
+recho a3 ${arr[0]:0:4}
+recho a4 "${arr[0]:0:4}"
+
+recho e1 ${f:0:4}
+recho e2 "${f:0:4}"
+
+recho d1 ${1:2:2}
+recho d2 "${1:2:2}"
+
+recho @1 ${@:1:2}
+recho @2 "${@:1:2}"
+
+declare -A assoc
+assoc=( [0]=$e [1]=$e )
+
+recho aa1 ${assoc:0:4}
+recho aa2 "${assoc:0:4}"
+
+recho aa3 ${assoc[@]:0:2}
+recho aa4 "${assoc[@]:0:2}"
diff --git a/tests/nquote2.right b/tests/nquote2.right
new file mode 100644
index 0000000..e7fb21e
--- /dev/null
+++ b/tests/nquote2.right
@@ -0,0 +1,76 @@
+argv[1] = <a^Ab>
+argv[1] = <uv^A^Awx>
+argv[1] = <aAb>
+argv[1] = <aAb>
+argv[1] = <uvA^Awx>
+argv[1] = <uvA^Awx>
+argv[1] = <a^AB>
+argv[1] = <a^AB>
+argv[1] = <uv^A^AWx>
+argv[1] = <uv^A^AWx>
+argv[1] = <aAb>
+argv[1] = <aAb>
+argv[1] = <uvAAwx>
+argv[1] = <uvAAwx>
+argv[1] = <a^AB>
+argv[1] = <a^AB>
+argv[1] = <uv^A^AWx>
+argv[1] = <uv^A^AWx>
+argv[1] = <uvA^Awx>
+argv[2] = <uvA^Awx>
+argv[1] = <uvA^Awx>
+argv[2] = <uvA^Awx>
+argv[1] = <uv^A^AWx>
+argv[2] = <uv^A^AWx>
+argv[1] = <uv^A^AWx>
+argv[2] = <uv^A^AWx>
+argv[1] = <uvAAwx>
+argv[2] = <uvAAwx>
+argv[1] = <uvAAwx>
+argv[2] = <uvAAwx>
+argv[1] = <uv^A^AWx>
+argv[2] = <uv^A^AWx>
+argv[1] = <uv^A^AWx>
+argv[2] = <uv^A^AWx>
+argv[1] = <a^Ab>
+argv[1] = <uv^A^Awx>
+argv[1] = <aAb>
+argv[1] = <aAb>
+argv[1] = <uvA^Awx>
+argv[1] = <uvA^Awx>
+argv[1] = <a^AB>
+argv[1] = <a^AB>
+argv[1] = <uv^A^AWx>
+argv[1] = <uv^A^AWx>
+argv[1] = <aAb>
+argv[1] = <aAb>
+argv[1] = <uvAAwx>
+argv[1] = <uvAAwx>
+argv[1] = <a^AB>
+argv[1] = <a^AB>
+argv[1] = <uv^A^AWx>
+argv[1] = <uv^A^AWx>
+argv[1] = <aAb>
+argv[2] = <uvA^Awx>
+argv[1] = <aAb>
+argv[2] = <uvA^Awx>
+argv[1] = <a^AB>
+argv[2] = <uv^A^Awx>
+argv[1] = <a^AB>
+argv[2] = <uv^A^Awx>
+argv[1] = <a^Ab>
+argv[2] = <uv^A^AWx>
+argv[1] = <a^Ab>
+argv[2] = <uv^A^AWx>
+argv[1] = <aAb>
+argv[2] = <uvAAwx>
+argv[1] = <aAb>
+argv[2] = <uvAAwx>
+argv[1] = <a^AB>
+argv[2] = <uv^A^Awx>
+argv[1] = <a^AB>
+argv[2] = <uv^A^Awx>
+argv[1] = <a^Ab>
+argv[2] = <uv^A^AWx>
+argv[1] = <a^Ab>
+argv[2] = <uv^A^AWx>
diff --git a/tests/nquote2.sub b/tests/nquote2.sub
new file mode 100644
index 0000000..bfe2b19
--- /dev/null
+++ b/tests/nquote2.sub
@@ -0,0 +1,42 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+t() {
+    printf '%s  |  %s\n' "$1" "$2"
+  }
+  v="'"       # v <- '
+
+  #--
+  t "${v/$'\''/$'\''}"        "'"
+  t  ${v/$'\''/$'\''}         "'"
+  t "${v/$'\''/x}"            "x"
+  t  ${v/$'\''/x}             "x"
+  t "${v/x/$'\''}"            "'"
+  t  ${v/x/$'\''}             "'"
+  t "${v/x/$'\x5c\''}"        "'" 
+  t  ${v/x/$'\x5c\''}         "'" 
+  t "${v/\'/\'}"              "'"
+  t  ${v/\'/\'}               "'"
+  t  ${v/\'/x}               "x"
+
+echo "'"
+echo "$'\''"
+
+echo $'\''
+
+echo $'\'abcd\''
+echo "$'\'abcd\''"
+
+v=1
+echo ${v/1/\'}
+echo ${v/\'/2}
diff --git a/tests/nquote2.tests b/tests/nquote2.tests
new file mode 100644
index 0000000..e3af99a
--- /dev/null
+++ b/tests/nquote2.tests
@@ -0,0 +1,95 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+a=$'a\001b'
+
+e=$'uv\001\001wx'
+
+recho $a
+recho $e
+
+recho ${a/$'\001'/A}
+recho "${a/$'\001'/A}"
+recho ${e/$'\001'/A}
+recho "${e/$'\001'/A}"
+
+recho ${a/b/B}
+recho "${a/b/B}"
+recho ${e/w/W}
+recho "${e/w/W}"
+
+recho ${a//$'\001'/A}
+recho "${a//$'\001'/A}"
+recho ${e//$'\001'/A}
+recho "${e//$'\001'/A}"
+
+recho ${a//b/B}
+recho "${a//b/B}"
+recho ${e//w/W}
+recho "${e//w/W}"
+
+# pos params pat subst
+
+set $e $e
+
+recho ${@/$'\001'/A}
+recho "${@/$'\001'/A}"
+recho ${@/w/W}
+recho "${@/w/W}"
+
+recho ${@//$'\001'/A}
+recho "${@//$'\001'/A}"
+recho ${@//w/W}
+recho "${@//w/W}"
+
+arr[0]=$a
+arr[1]=$e
+
+recho ${arr[0]}
+recho ${arr[1]}
+
+recho ${arr[0]/$'\001'/A}
+recho "${arr[0]/$'\001'/A}"
+recho ${arr[1]/$'\001'/A}
+recho "${arr[1]/$'\001'/A}"
+
+recho ${arr[0]/b/B}
+recho "${arr[0]/b/B}"
+recho ${arr[1]/w/W}
+recho "${arr[1]/w/W}"
+
+recho ${arr[0]//$'\001'/A}
+recho "${arr[0]//$'\001'/A}"
+recho ${arr[1]//$'\001'/A}
+recho "${arr[1]//$'\001'/A}"
+
+recho ${arr[0]//b/B}
+recho "${arr[0]//b/B}"
+recho ${arr[1]//w/W}
+recho "${arr[1]//w/W}"
+
+recho ${arr[@]/$'\001'/A}
+recho "${arr[@]/$'\001'/A}"
+
+recho ${arr[@]/b/B}
+recho "${arr[@]/b/B}"
+recho ${arr[@]/w/W}
+recho "${arr[@]/w/W}"
+
+recho ${arr[@]//$'\001'/A}
+recho "${arr[@]//$'\001'/A}"
+
+recho ${arr[@]//b/B}
+recho "${arr[@]//b/B}"
+recho ${arr[@]//w/W}
+recho "${arr[@]//w/W}"
diff --git a/tests/nquote3.right b/tests/nquote3.right
new file mode 100644
index 0000000..d01eecc
--- /dev/null
+++ b/tests/nquote3.right
@@ -0,0 +1,60 @@
+argv[1] = <uv^A^A>
+argv[1] = <uv^A^A>
+argv[1] = <uv^A>
+argv[1] = <uv^A>
+argv[1] = <^Ab>
+argv[1] = <^Ab>
+argv[1] = <xy>
+argv[1] = <xy>
+argv[1] = <xy>
+argv[1] = <uv^Aw^Axy>
+argv[1] = <uv^A>
+argv[1] = <uv^A>
+argv[1] = <^Awx>
+argv[1] = <^Awx>
+argv[1] = <xy>
+argv[1] = <xy>
+argv[1] = <xy>
+argv[1] = <uv^Aw^Axy>
+argv[1] = <uv^A>
+argv[1] = <uv^A>
+argv[1] = <^Awx>
+argv[1] = <^Awx>
+argv[1] = <uv^A>
+argv[1] = <uv^A>
+argv[1] = <^Awx>
+argv[1] = <^Awx>
+argv[1] = <xy>
+argv[1] = <xy>
+argv[1] = <xy>
+argv[1] = <xy>
+argv[1] = <uv^Aw^Axy>
+argv[1] = <uv^Aw^Axy>
+argv[1] = <uv^A>
+argv[1] = <uv^A>
+argv[1] = <^Awx>
+argv[1] = <^Awx>
+argv[1] = <uv^A>
+argv[2] = <uv^Aw>
+argv[1] = <uv^A>
+argv[2] = <uv^Aw>
+argv[1] = <^Awx>
+argv[2] = <w^Axy>
+argv[1] = <^Awx>
+argv[2] = <w^Axy>
+argv[1] = <wx>
+argv[2] = <xy>
+argv[1] = <uv^A^Awx>
+argv[2] = <uv^Aw^Axy>
+argv[1] = <uv^A>
+argv[2] = <uv^Aw>
+argv[1] = <uv^A>
+argv[2] = <uv^Aw>
+argv[1] = <^Awx>
+argv[2] = <w^Axy>
+argv[1] = <^Awx>
+argv[2] = <w^Axy>
+argv[1] = <wx>
+argv[2] = <xy>
+argv[1] = <uv^A^Awx>
+argv[2] = <uv^Aw^Axy>
diff --git a/tests/nquote3.sub b/tests/nquote3.sub
new file mode 100644
index 0000000..d1480c0
--- /dev/null
+++ b/tests/nquote3.sub
@@ -0,0 +1,8 @@
+. ./test-glue-functions
+
+recho $'\c?'
+
+echo $'\c?' | od -t a | _intl_normalize_spaces
+echo $'\c[\c\\\c]\c^\c_\c?' | od -t a | _intl_normalize_spaces
+
+echo $'\q'
diff --git a/tests/nquote3.tests b/tests/nquote3.tests
new file mode 100644
index 0000000..44b51c4
--- /dev/null
+++ b/tests/nquote3.tests
@@ -0,0 +1,98 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+a=$'a\001b'
+
+set $a
+
+b=$a
+c=$1
+d="$1"
+
+e=$'uv\001\001wx'
+f=$'uv\001w\001xy'
+
+set $e $e
+
+recho ${e%%??}
+recho "${e%%??}"
+
+recho ${e%%???}
+recho "${e%%???}"
+
+recho ${a#?}
+recho "${a#?}"
+
+# simple variables
+
+recho ${f##*$'\001'}
+recho "${f##*$'\001'}"
+recho ${f##*'
'}		# literal ^A
+recho "${f##*'^A'}"		# two characters, `^' and `A'
+
+recho ${e%$'\001'*}
+recho "${e%$'\001'*}"
+recho ${e#*$'\001'}
+recho "${e#*$'\001'}"
+
+# array members
+
+arr[0]=$e
+arr[1]=$f
+
+recho ${arr[1]##*$'\001'}
+recho "${arr[1]##*$'\001'}"
+recho ${arr[1]##*'
'}		# literal ^A
+recho "${arr[1]##*'^A'}"	# two characters, `^' and `A'
+
+recho ${arr[0]%$'\001'*}
+recho "${arr[0]%$'\001'*}"
+recho ${arr[0]#*$'\001'}
+recho "${arr[0]#*$'\001'}"
+
+recho ${arr%$'\001'*}
+recho "${arr%$'\001'*}"
+recho ${arr#*$'\001'}
+recho "${arr#*$'\001'}"
+
+# positional parameters
+
+set $e $f
+
+recho ${2##*$'\001'}
+recho "${2##*$'\001'}"
+recho ${2##*'
'}		# literal ^A
+recho "${2##*'
'}"		# literal ^A
+recho ${2##*'^A'}		# two characters, `^' and `A'
+recho "${2##*'^A'}"		# two characters, `^' and `A'
+
+recho ${1%$'\001'*}
+recho "${1%$'\001'*}"
+recho ${1#*$'\001'}
+recho "${1#*$'\001'}"
+
+recho ${@%$'\001'*}
+recho "${@%$'\001'*}"
+recho ${@#*$'\001'}
+recho "${@#*$'\001'}"
+recho ${@##*'
'}		# literal ^A
+recho "${@##*'^A'}"		# two characters, `^' and `A'
+
+# arrays treated as a whole
+
+recho ${arr[@]%$'\001'*}
+recho "${arr[@]%$'\001'*}"
+recho ${arr[@]#*$'\001'}
+recho "${arr[@]#*$'\001'}"
+recho ${arr[@]##*'
'}		# literal ^A
+recho "${arr[@]##*'^A'}"		# two characters, `^' and `A'
diff --git a/tests/nquote4.right b/tests/nquote4.right
new file mode 100644
index 0000000..1f7ae17
--- /dev/null
+++ b/tests/nquote4.right
@@ -0,0 +1,18 @@
+argv[1] = <ab>
+argv[1] = <abAcd>
+argv[1] = <abAcd>
+argv[1] = <ab^Dcd>
+argv[1] = <abLd>
+argv[1] = <abÞ>
+argv[1] = <abÞ>
+argv[1] = <abÍe>
+argv[1] = <ab^Lde>
+argv[1] = <¼X>
+argv[1] = <«cX>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <gX>
+argv[1] = <Ab>
+argv[1] = <>
+argv[1] = <^Abcd>
+argv[1] = <Þ>
diff --git a/tests/nquote4.tests b/tests/nquote4.tests
new file mode 100644
index 0000000..5c67705
--- /dev/null
+++ b/tests/nquote4.tests
@@ -0,0 +1,37 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+recho $'ab\x{}cd'
+recho $'ab\x{41}cd'
+recho $'ab\x41cd'
+
+recho $'ab\x{4}cd'
+recho $'ab\x4cd'
+
+recho $'ab\x{cde'
+
+recho $'ab\x{cde'
+recho $'ab\x{cd}e'
+recho $'ab\x{c}de'
+
+recho $'\x{abcX'
+recho $'\x{ab}cX'
+recho $'\x{}X'
+recho $'\x{X'
+recho $'\x{01234567X'
+
+recho $'\x{41}b'
+recho $'\x{}bc'
+recho $'\x{1}bcd'
+
+recho $'\x{bde'
diff --git a/tests/nquote5.right b/tests/nquote5.right
new file mode 100644
index 0000000..a893329
--- /dev/null
+++ b/tests/nquote5.right
@@ -0,0 +1,86 @@
+argv[1] = <ab>
+argv[2] = <cd>
+argv[3] = <ef>
+argv[1] = <ab>
+argv[2] = <cd>
+argv[3] = <ef>
+argv[1] = <xxab>
+argv[2] = <cd>
+argv[3] = <efyy>
+argv[1] = <ab^Acd^Aef>
+argv[1] = <ab cd ef>
+argv[1] = <ab>
+argv[2] = <cd>
+argv[3] = <ef>
+argv[1] = <ab>
+argv[2] = <cd>
+argv[1] = <ab^Acd^A>
+argv[1] = <ab>
+argv[2] = <cd>
+argv[3] = <e>
+argv[1] = <ab^Acd^Ae>
+argv[1] = <ab>
+argv[2] = <cd>
+argv[3] = <ef>
+argv[1] = <ab>
+argv[2] = <cd>
+argv[3] = <ef>
+argv[1] = <>
+argv[2] = <c>
+argv[1] = <ab>
+argv[2] = <-->
+argv[3] = <cd>
+argv[4] = <-->
+argv[5] = <ef>
+argv[1] = <ab>
+argv[2] = <cd>
+argv[3] = <ef>
+argv[1] = <ab>
+argv[2] = <cd>
+argv[3] = <ef>
+argv[1] = <ab>
+argv[2] = <-->
+argv[3] = <cd>
+argv[4] = <-->
+argv[5] = <ef>
+argv[1] = <uv^?wx^?yz>
+argv[1] = <abyab^Acd^Aefz>
+argv[1] = <abyab>
+argv[2] = <cd>
+argv[3] = <efz>
+argv[1] = <abuv^?wx^?yzyab^Acd^Aefz>
+argv[1] = <abuv^?wx^?yzyab>
+argv[2] = <cd>
+argv[3] = <efz>
+argv[1] = <abuv^?wx^?yzyab>
+argv[2] = <-->
+argv[3] = <cd>
+argv[4] = <-->
+argv[5] = <efz>
+argv[6] = <-->
+argv[1] = <ab^Acd^Aef>
+argv[1] = <uv>
+argv[2] = <wx>
+argv[3] = <yz>
+argv[1] = <abyuv^?wx^?yzz>
+argv[1] = <abyuv>
+argv[2] = <wx>
+argv[3] = <yzz>
+argv[1] = <abuv^?wx^?yzyab^Acd^Aefz>
+argv[1] = <abuv>
+argv[2] = <wx>
+argv[3] = <yzyab^Acd^Aefz>
+argv[1] = <abuv^?wx^?yzyab>
+argv[2] = <-->
+argv[3] = <cd>
+argv[4] = <-->
+argv[5] = <efz>
+argv[6] = <-->
+argv[7] = <>
+argv[1] = <abuv>
+argv[2] = <-->
+argv[3] = <wx>
+argv[4] = <-->
+argv[5] = <yzyab^Acd^Aefz>
+argv[6] = <-->
+argv[7] = <>
diff --git a/tests/nquote5.tests b/tests/nquote5.tests
new file mode 100644
index 0000000..ca0308d
--- /dev/null
+++ b/tests/nquote5.tests
@@ -0,0 +1,76 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+a=$'ab\001cd\001ef'
+IFS=$'\001'
+
+recho $a
+recho ${a}
+recho xx${a}yy
+recho "$a"
+
+recho $(echo $a)
+recho $(echo "$a")
+
+recho ${a%%??}
+recho "${a%%??}"
+
+recho ${a/f/}
+recho "${a/f/}"
+
+a1=("$a")
+recho ${a1[0]}
+recho ${a1}
+
+recho ${a:2:2}
+
+set -- $a
+recho $1 -- $2 -- $3
+
+set -- "$a"
+recho $1
+recho ${1}
+
+echo "$a" | { IFS=$'\001' read x y z; recho $x -- $y -- $z ; }
+unset x y z
+b=$'uv\177wx\177yz'
+
+recho $b
+
+recho "ab${x}y${a}z"
+recho ab${x}y${a}z
+
+recho "ab${b}y${a}z"
+recho ab${b}y${a}z
+
+echo "ab${b}y${a}z" | { IFS=$'\001' read l m n o  ; recho $l -- $m -- $n -- $o; }
+unset l m n o
+
+a=$'ab\001cd\001ef'
+b=$'uv\177wx\177yz'
+
+IFS=$'\177'
+
+recho $a
+recho $b
+
+recho "ab${x}y${b}z"
+recho ab${x}y${b}z
+
+recho "ab${b}y${a}z"
+recho ab${b}y${a}z
+
+echo "ab${b}y${a}z" | { IFS=$'\001' read l m n o  ; recho "$l" -- "$m" -- "$n" -- "$o"; }
+unset l m n o
+echo "ab${b}y${a}z" | { IFS=$'\177' read l m n o  ; recho "$l" -- "$m" -- "$n" -- "$o"; }
+unset l m n o
diff --git a/tests/parser.right b/tests/parser.right
new file mode 100644
index 0000000..3a01004
--- /dev/null
+++ b/tests/parser.right
@@ -0,0 +1,16 @@
+AAA
+bash5: line 1: `invalid-name': not a valid identifier
+in
+in
+in
+in
+bash5: -c: line 1: syntax error near unexpected token `)'
+bash5: -c: line 1: `case x in esac) echo done; esac'
+in
+bash5: -c: line 1: syntax error near unexpected token `do'
+bash5: -c: line 1: `case in do do) echo in; esac'
+bash5: -c: line 1: syntax error near unexpected token `('
+bash5: -c: line 1: `for()'
+in
+done
+ok 1
diff --git a/tests/parser.tests b/tests/parser.tests
new file mode 100644
index 0000000..6e020a4
--- /dev/null
+++ b/tests/parser.tests
@@ -0,0 +1,6 @@
+# catch-all for parsing problems that don't fit anywhere else
+
+# this has to be in a separate file to get desired EOF behavior
+${THIS_SH} ./parser1.sub
+
+${THIS_SH} ./posix2syntax.sub
diff --git a/tests/parser1.sub b/tests/parser1.sub
new file mode 100644
index 0000000..5031931
--- /dev/null
+++ b/tests/parser1.sub
@@ -0,0 +1 @@
+eval "array=(foo bar)" ; echo AAA\
diff --git a/tests/posix2.right b/tests/posix2.right
new file mode 100644
index 0000000..40aea03
--- /dev/null
+++ b/tests/posix2.right
@@ -0,0 +1,6 @@
+Testing for POSIX.2 conformance
+./posix2.tests: eval: line 195: syntax error near unexpected token `esac'
+./posix2.tests: eval: line 195: `case esac in (esac) ;; *) echo "case esac test 3" ;; esac'
+./posix2.tests: eval: line 197: syntax error near unexpected token `)'
+./posix2.tests: eval: line 197: `case esac in esac) ;; *) echo "case esac test 4";; esac'
+All tests passed
diff --git a/tests/posix2.tests b/tests/posix2.tests
new file mode 100644
index 0000000..9b6c093
--- /dev/null
+++ b/tests/posix2.tests
@@ -0,0 +1,204 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+# posix-2.sh - Simple identification tests for POSIX.2 features
+# commonly missing or incorrectly implemented.
+# Time-stamp: <96/04/10 16:43:48 gildea>
+# By Stephen Gildea <gildea@x.org> March 1995
+#
+# Copyright (c) 1995  Stephen Gildea
+# Permission is hereby granted to deal in this Software without restriction.
+# THIS SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND.
+#
+# MODIFIED BY chet@po.cwru.edu to make part of the bash test suite.
+# last change: Wed Jun 19 12:24:24 EDT 1996
+#
+# some of the tests:
+#
+# shell functions (do we care?)
+# var=${var:-val}
+# unset
+# set --
+# IFS parsing
+## not exiting with -e and failed "if", the way Ultrix does (Ultrix 4.2?)
+# "$@" expands to zero arguments if passed zero arguments
+# $SHELL -c 'echo $1' bad good
+# test -x
+# positional parameters greater than 9
+# arithmetic expansion $(( ... ))
+# getopts
+
+# For some tests we must run a sub-shell; $TESTSHELL says what to use.
+# If set, TESTSHELL must be an absolute pathname.
+# For example, on HP-UX 9, /bin/posix/sh is the supposedly-compliant shell.
+TESTSHELL=${THIS_SH:-$PWD/../bash}
+
+# these tests create temp files with names $TMPDIR/conf*
+: ${TMPDIR:=/tmp}
+
+exitval=0
+numtests=0
+
+echo "Testing for POSIX.2 conformance"
+
+newtest()
+{
+    numtests=$(($numtests + 1))
+}
+
+testfail()
+{
+    echo "$1 test failed"
+    exitval=$(($exitval + 1))
+}
+
+newtest
+empty=""
+test "${empty:-ok}" = ok || testfail "empty var colon"
+newtest
+test "${empty-bad}" = "" || testfail "got \"${empty-bad}\": empty var nocolon"
+newtest
+test "${unsetvar-ok}" = ok || testfail "unset var"
+newtest
+unset empty
+test "${empty-ok}" = ok || testfail "unset"
+
+newtest
+set -- -Z
+test "x$1" = x-Z || testfail '\"set -- arg\"'
+# this should empty the argument list
+newtest
+set --
+test $# = 0 || testfail "still $# args: \"set --\""
+
+# IFS parsing:
+newtest
+names=one/good/three
+saved_ifs="$IFS"
+IFS=/
+set $names lose
+test "$2" = good || testfail "got \"$2\": IFS parsing"
+IFS="$saved_ifs"
+
+# "$@" with 0 arguments should expand to 0 arguments
+newtest
+cat > $TMPDIR/conftest1 << EOF
+$TMPDIR/conftest2 "\$@"
+EOF
+cat > $TMPDIR/conftest2 << "EOF"
+#! /bin/sh
+echo $#
+EOF
+chmod +x $TMPDIR/conftest1 $TMPDIR/conftest2
+numargs=$($TESTSHELL $TMPDIR/conftest1)
+if [ "$?" != 0 ]; then
+    testfail 'running $@'
+else
+    test "$numargs" = 0 || testfail '"$@" got '"$numargs args: expansion w 0 args"
+fi
+rm -f $TMPDIR/conftest1 $TMPDIR/conftest2
+
+newtest
+val=$("$TESTSHELL" -c 'echo $1' csh good)
+test "$val" = good || testfail "got \"$val\": sh -c"
+
+newtest
+# do these tests in a sub-shell because failure will exit
+val=$("$TESTSHELL" -c 'echo ${10}' 0  1 2 3 4 5 6 7 8 9 ten 11 2> /dev/null)
+test "$val" = ten || testfail "accessing more than 9 positional params"
+
+a=abc_def_ghi
+export a
+newtest; val=`"$TESTSHELL" -c 'echo "${a%_*}"' 2> /dev/null`
+test "$val" = abc_def || testfail "parameter % op"
+newtest; val=`"$TESTSHELL" -c 'echo "${a%%_*}"' 2> /dev/null`
+test "$val" = abc || testfail "parameter %% op"
+newtest; val=`"$TESTSHELL" -c 'echo "${a#*_}"' 2> /dev/null`
+test "$val" = def_ghi || testfail "parameter # op"
+newtest; val=`"$TESTSHELL" -c 'echo "${a##*_}"' 2> /dev/null`
+test "$val" = ghi || testfail "parameter ## op"
+
+newtest
+"$TESTSHELL" -c 'export a=value' 2> /dev/null || testfail "export with value"
+
+newtest
+a=5; test "$(( ($a+1)/2 ))" = 3 || testfail "arithmetic expansion"
+
+# does "test" support the -x switch?
+newtest
+touch $TMPDIR/conftest
+chmod -x $TMPDIR/conftest
+test -x $TMPDIR/conftest && testfail "negative test -x"
+chmod +x $TMPDIR/conftest
+test -x $TMPDIR/conftest || testfail "positive test -x"
+rm -f $TMPDIR/conftest
+
+newtest
+test "$OPTIND" = 1 || testfail "OPTIND initial value"
+
+newtest
+getopts a: store -a aoptval
+if [ "$OPTIND" != 3 ] || [ "$store" != a ] || [ "$OPTARG" != aoptval ]; then
+    testfail "getopts"
+fi
+
+# if I change the default quoting style for variable values, these
+# next four must change
+
+newtest
+SQUOTE="'"
+val1=$(set | sed -n 's:^SQUOTE=::p')
+if [ "$val1" != "\'" ]; then
+        testfail "variable quoting 1"
+fi
+
+newtest
+VTILDE='~'
+val1=$(set | sed -n 's:^VTILDE=::p')
+if [ "$val1" != "'~'" ]; then
+	testfail "variable quoting 2"
+fi
+
+newtest
+VHASH=ab#cd
+val1=$(set | sed -n 's:^VHASH=::p')
+if [ "$val1" != "ab#cd" ]; then
+	testfail "variable quoting 3"
+fi
+
+newtest
+VHASH2=#abcd
+val1=$(set | sed -n 's:^VHASH2=::p')
+if [ "$val1" != "'#abcd'" ]; then
+	testfail "variable quoting 4"
+fi
+
+# these are Posix.2 shell grammar rule 4, problems through bash-4.3
+newtest
+case esac in (foo|esac) ;; *) testfail "case esac test 1" ;; esac
+newtest
+case esac in foo|esac) ;; *) testfail "case esac test 2" ;; esac
+
+# these are supposed to be syntax errors
+newtest
+eval 'case esac in (esac) ;; *) echo "case esac test 3" ;; esac'
+newtest
+eval 'case esac in esac) ;; *) echo "case esac test 4";; esac'
+
+if [ $exitval = 0 ]; then
+    echo "All tests passed"
+else
+    echo "$exitval of $numtests tests failed"
+fi
+exit $exitval
diff --git a/tests/posix2syntax.sub b/tests/posix2syntax.sub
new file mode 100644
index 0000000..39af9a5
--- /dev/null
+++ b/tests/posix2syntax.sub
@@ -0,0 +1,66 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+: ${THIS_SH:=./bash}
+bashname=bash${BASH_VERSION%%.*}
+
+# tests for Posix grammar special cases
+
+# Posix grammar rule 5
+${THIS_SH} -c 'for invalid-name in a b c; do echo error; done' $bashname
+
+# Posix grammar rule 6: third word in FOR or SELECT
+for i; do echo; done; echo in
+for i; do echo in; done
+for i do echo in; done
+
+select i; do echo; done; echo in
+select i; do echo in; done; echo in
+select i do echo in; done; echo in
+
+# Posix grammar rule 4: when PATTERN == ESAC, return ESAC
+${THIS_SH} -c 'case x in esac) echo done; esac' $bashname
+
+# Posix grammar rule 6: third word in CASE
+${THIS_SH} -c 'case in in in) echo in; esac;' $bashname
+${THIS_SH} -c 'case in do do) echo in; esac' $bashname
+
+# Posix grammar rule 8: function NAME
+${THIS_SH} -o posix -c 'for()
+{
+echo function for;
+}' $bashname
+
+for for in for; do echo in; echo done; done
+
+${THIS_SH} -c 'for (( i = 0; i < 5; i++ )) do : ; done' $bashname
+${THIS_SH} -c 'for (( i = 0; i < 5; i++ )) { : ; }' $bashname
+
+# bug report: IN turning on unwanted alias expansion
+${THIS_SH} -o posix -c '
+alias foo='two words'
+foo_word='foo'
+case "$foo_word"
+in
+	foo) echo "bad 1";;
+esac' $bashname
+
+${THIS_SH} -o posix -c '
+alias foo='oneword'
+foo_word='foo'
+case "$foo_word"
+in
+	foo) echo "ok 1";;
+esac' $bashname
+
+
diff --git a/tests/posixexp.right b/tests/posixexp.right
new file mode 100644
index 0000000..e6bdbf4
--- /dev/null
+++ b/tests/posixexp.right
@@ -0,0 +1,288 @@
+a
+b
+a b
+argv[1] = <a>
+argv[2] = <b>
+argv[3] = <x>
+argv[4] = <a>
+argv[5] = <b>
+argv[1] = <a\ b>
+argv[2] = <x>
+argv[3] = <a\ b>
+argv[1] = <foo 'bar' baz>
+argv[1] = <a b  c d>
+argv[1] = <a b  c d>
+argv[1] = <foo ax{{{}b c d{} bar>
+argv[2] = <}>
+argv[3] = <baz>
+argv[1] = <'foo'>
+argv[1] = <'foo'>
+argv[1] = <$a>
+argv[1] = <'foo'>
+argv[1] = <foo*bar>
+argv[1] = <foo*bar>
+argv[1] = <foo*bar'}>
+argv[1] = <x'>
+<.> <x> <.> <> <.> <x> <.> 
+<x> <.> <w> <.> <x> <.> <w> <.> 
+<x> <.> <w> <.> <x> <.> <w> <.> 
+<x> <.> <w> <.> <x> <.> <w> <.> 
+<.> <w> <.> <> <.> <w> <.> 
+<.> <w> <.> <> <.> <w> <.> 
+<x> <.> <x> <.> <x> <.> <x> <.> 
+<x> <.> <w> <.> <x> <.> <w> <.> 
+<x> <.> <w> <.> <x> <.> <w> <.> 
+<x> <.> <w> <.> <x> <.> <w> <.> 
+argv[1] = <'bar>
+argv[1] = <foo 'bar baz>
+argv[1] = <}z>
+argv[1] = <''z}>
+argv[1] = <1>
+argv[2] = <2>
+argv[1] = <1>
+argv[2] = <2>
+argv[1] = <1>
+argv[2] = <2>
+argv[1] = <1 2>
+argv[1] = <1>
+argv[2] = <2>
+argv[1] = <1 2>
+argv[1] = <1>
+argv[2] = <2>
+argv[1] = <1 2>
+argv[1] = <1>
+argv[2] = <2>
+argv[1] = <1 2>
+argv[1] = <1>
+argv[2] = <2>
+argv[1] = <1 2>
+argv[1] = <1>
+argv[2] = <2>
+argv[1] = <1>
+argv[2] = <2>
+argv[1] = <1>
+argv[2] = <2>
+argv[1] = <12>
+argv[1] = <1 2>
+argv[1] = <1 2>
+argv[1] = <1 2>
+argv[1] = <1 2>
+argv[1] = <1 2>
+argv[1] = <1 2>
+argv[1] = <12>
+argv[1] = <12>
+argv[1] = <12>
+argv[1] = <12>
+argv[1] = <12>
+argv[1] = <12>
+argv[1] = <1 2>
+argv[1] = <1 2>
+argv[1] = <12>
+argv[1] = <12>
+normal IFS
+argv[1] = <abc>
+argv[2] = <def>
+argv[3] = <ghi>
+argv[4] = <jkl>
+argv[1] = <abc>
+argv[2] = <def>
+argv[3] = <ghi>
+argv[4] = <jkl>
+argv[1] = <abc>
+argv[2] = <def>
+argv[3] = <ghi>
+argv[4] = <jkl>
+null IFS
+argv[1] = < abc>
+argv[2] = <def ghi>
+argv[3] = <jkl >
+argv[1] = < abc def ghi jkl >
+argv[1] = < abc>
+argv[2] = <def ghi>
+argv[3] = <jkl >
+non-standard IFS
+argv[1] = < abc>
+argv[2] = <def ghi>
+argv[3] = <jkl >
+argv[1] = < abc def ghi jkl >
+argv[1] = < abc def ghi jkl >
+unset IFS
+argv[1] = < abc>
+argv[2] = <def ghi>
+argv[3] = <jkl >
+argv[1] = < abc def ghi jkl >
+argv[1] = < abc def ghi jkl >
+
+001: IFS = (unset): unset -v foo; set -- ${foo=$*}
+soh stx etx del   / soh stx etx del
+
+002: IFS = (unset): unset -v foo; set -- ${foo="$*"}
+soh stx etx del   / soh stx etx del
+
+003: IFS = (unset): unset -v foo; set -- "${foo=$*}"
+soh stx etx del   / soh stx etx del
+
+004: IFS = (unset): foo=; set -- ${foo:=$*}
+soh stx etx del   / soh stx etx del
+
+005: IFS = (unset): foo=; set -- ${foo:="$*"}
+soh stx etx del   / soh stx etx del
+
+006: IFS = (unset): foo=; set -- "${foo:=$*}"
+soh stx etx del   / soh stx etx del
+
+007: IFS = (unset): unset -v foo; set -- ${foo=$@}
+soh stx etx del   / soh stx etx del
+
+008: IFS = (unset): unset -v foo; set -- ${foo="$@"}
+soh stx etx del   / soh stx etx del
+
+009: IFS = (unset): unset -v foo; set -- "${foo=$@}"
+soh stx etx del   / soh stx etx del
+
+010: IFS = (unset): foo=; set -- ${foo:=$@}
+soh stx etx del   / soh stx etx del
+
+011: IFS = (unset): foo=; set -- ${foo:="$@"}
+soh stx etx del   / soh stx etx del
+
+012: IFS = (unset): foo=; set -- "${foo:=$@}"
+soh stx etx del   / soh stx etx del
+
+013: IFS = (null): unset -v foo; set -- ${foo=$*}
+soh stx etx del   / soh stx etx del
+
+014: IFS = (null): unset -v foo; set -- ${foo="$*"}
+soh stx etx del   / soh stx etx del
+
+015: IFS = (null): unset -v foo; set -- "${foo=$*}"
+soh stx etx del   / soh stx etx del
+
+016: IFS = (null): foo=; set -- ${foo:=$*}
+soh stx etx del   / soh stx etx del
+
+017: IFS = (null): foo=; set -- ${foo:="$*"}
+soh stx etx del   / soh stx etx del
+
+018: IFS = (null): foo=; set -- "${foo:=$*}"
+soh stx etx del   / soh stx etx del
+
+019: IFS = (null): unset -v foo; set -- ${foo=$@}
+soh stx etx del   / soh stx etx del
+
+020: IFS = (null): unset -v foo; set -- ${foo="$@"}
+soh stx etx del   / soh stx etx del
+
+021: IFS = (null): unset -v foo; set -- "${foo=$@}"
+soh stx etx del   / soh stx etx del
+
+022: IFS = (null): foo=; set -- ${foo:=$@}
+soh stx etx del   / soh stx etx del
+
+023: IFS = (null): foo=; set -- ${foo:="$@"}
+soh stx etx del   / soh stx etx del
+
+024: IFS = (null): foo=; set -- "${foo:=$@}"
+soh stx etx del   / soh stx etx del
+
+025: IFS = x: unset -v foo; set -- ${foo=$*}
+soh stx etx del   / soh stx etx del
+
+026: IFS = x: unset -v foo; set -- ${foo="$*"}
+soh stx etx del   / soh stx etx del
+
+027: IFS = x: unset -v foo; set -- "${foo=$*}"
+soh stx etx del   / soh stx etx del
+
+028: IFS = x: foo=; set -- ${foo:=$*}
+soh stx etx del   / soh stx etx del
+
+029: IFS = x: foo=; set -- ${foo:="$*"}
+soh stx etx del   / soh stx etx del
+
+030: IFS = x: foo=; set -- "${foo:=$*}"
+soh stx etx del   / soh stx etx del
+
+031: IFS = x: unset -v foo; set -- ${foo=$@}
+soh stx etx del   / soh stx etx del
+
+032: IFS = x: unset -v foo; set -- ${foo="$@"}
+soh stx etx del   / soh stx etx del
+
+033: IFS = x: unset -v foo; set -- "${foo=$@}"
+soh stx etx del   / soh stx etx del
+
+034: IFS = x: foo=; set -- ${foo:=$@}
+soh stx etx del   / soh stx etx del
+
+035: IFS = x: foo=; set -- ${foo:="$@"}
+soh stx etx del   / soh stx etx del
+
+036: IFS = x: foo=; set -- "${foo:=$@}"
+soh stx etx del   / soh stx etx del
+
+037: IFS = sp  ht  nl: unset -v foo; set -- ${foo=$*}
+soh stx etx del   / soh stx etx del
+
+038: IFS = sp  ht  nl: unset -v foo; set -- ${foo="$*"}
+soh stx etx del   / soh stx etx del
+
+039: IFS = sp  ht  nl: unset -v foo; set -- "${foo=$*}"
+soh stx etx del   / soh stx etx del
+
+040: IFS = sp  ht  nl: foo=; set -- ${foo:=$*}
+soh stx etx del   / soh stx etx del
+
+041: IFS = sp  ht  nl: foo=; set -- ${foo:="$*"}
+soh stx etx del   / soh stx etx del
+
+042: IFS = sp  ht  nl: foo=; set -- "${foo:=$*}"
+soh stx etx del   / soh stx etx del
+
+043: IFS = sp  ht  nl: unset -v foo; set -- ${foo=$@}
+soh stx etx del   / soh stx etx del
+
+044: IFS = sp  ht  nl: unset -v foo; set -- ${foo="$@"}
+soh stx etx del   / soh stx etx del
+
+045: IFS = sp  ht  nl: unset -v foo; set -- "${foo=$@}"
+soh stx etx del   / soh stx etx del
+
+046: IFS = sp  ht  nl: foo=; set -- ${foo:=$@}
+soh stx etx del   / soh stx etx del
+
+047: IFS = sp  ht  nl: foo=; set -- ${foo:="$@"}
+soh stx etx del   / soh stx etx del
+
+048: IFS = sp  ht  nl: foo=; set -- "${foo:=$@}"
+soh stx etx del   / soh stx etx del
+argv[1] = <^A^B^C^?>
+argv[1] = <^A^B^C^?>
+argv[1] = <^A^B^C^?>
+argv[1] = <^A^B^C^?>
+argv[1] = <^A^B^C^?>
+argv[1] = <^A^B^C^?>
+argv[1] = <^A^B^C^?>
+argv[1] = <^A^B^C^?>
+argv[1] = <a>
+argv[2] = <b>
+argv[1] = <a>
+argv[2] = <b>
+argv[1] = <a>
+argv[2] = <b>
+argv[1] = <a>
+argv[2] = <b>
+[  abc    def  ghi  jkl /  abc    def  ghi  jkl ]
+[  abc    def  ghi  jkl ]
+[  abc    def  ghi  jkl /  abc    def  ghi  jkl /  abc    def  ghi  jkl ]
+5: notOK
+OK
+OK
+5: $'not\ttoo\nbad'
+"A"
+A
+argv[1] = <"A">
+argv[1] = <A>
+argv[1] = <A>
+./posixexp.tests: line 97: unexpected EOF while looking for matching `}'
+./posixexp.tests: line 98: syntax error: unexpected end of file
diff --git a/tests/posixexp.tests b/tests/posixexp.tests
new file mode 100644
index 0000000..d8f6644
--- /dev/null
+++ b/tests/posixexp.tests
@@ -0,0 +1,97 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+unset a
+printf "%s\n" ${a:=a\ b}
+echo "$a"
+
+unset v
+recho ${v=a\ b} x ${v=c\ d}
+
+unset v
+recho "${v=a\ b}" x "${v=c\ d}"
+
+unset a v
+
+recho "foo ${IFS+'bar'} baz"
+recho "a ${IFS+b  c} d"
+
+recho "a ${IFS+"b  c"} d"
+
+u=x
+recho "foo ${IFS+a$u{{{\}b} c ${IFS+d{}} bar" ${IFS-e{}} baz
+
+a=foo
+recho "${IFS+'$a'}"
+recho "${IFS+"'$a'"}"
+
+recho ${IFS+'$a'}
+recho ${IFS+"'$a'"}
+
+unset a u
+x='foo*bar'
+
+recho "${x##"}"}"
+recho "${x##'}'}"
+recho "${x##'}"
+
+recho "${x:-'}'}"
+
+foo="x'a'y"
+recho "${foo%*'a'*}"
+unset x
+
+unset u
+v=w
+printf '<%s> ' ${u+x} . ${v+x} . "${u+x}" . "${v+x}" .; echo
+printf '<%s> ' ${u-x} . ${v-x} . "${u-x}" . "${v-x}" .; echo
+printf '<%s> ' ${u=x} . ${v=x} . "${u=x}" . "${v=x}" .; echo
+printf '<%s> ' ${u?x} . ${v?x} . "${u?x}" . "${v?x}" .; echo
+printf '<%s> ' ${u#x} . ${v#x} . "${u#x}" . "${v#x}" .; echo
+printf '<%s> ' ${u%x} . ${v%x} . "${u%x}" . "${v%x}" .; echo
+printf '<%s> ' ${u:+x} . ${v:+x} . "${u:+x}" . "${v:+x}" .; echo
+printf '<%s> ' ${u:-x} . ${v:-x} . "${u:-x}" . "${v:-x}" .; echo
+printf '<%s> ' ${u:=x} . ${v:=x} . "${u:=x}" . "${v:=x}" .; echo
+printf '<%s> ' ${u:?x} . ${v:?x} . "${u:?x}" . "${v:?x}" .; echo
+# these are invalid substitution operators
+#printf '<%s> ' ${u:#x} . ${v:#x} . "${u:#x}" . "${v:#x}" .; echo
+#printf '<%s> ' ${u:%x} . ${v:%x} . "${u:%x}" . "${v:%x}" .; echo
+
+unset foo
+set -o posix
+
+recho "${IFS+'bar}"
+recho "foo ${IFS+'bar} baz"
+
+recho ${IFS+'}'z}
+recho "${IFS+'}'z}"
+
+: ${TMPDIR:=/var/tmp}
+rm -f $TMPDIR/sh
+cp ${THIS_SH} $TMPDIR/sh
+THIS_SH=$TMPDIR/sh ${THIS_SH} ./posixexp1.sub || echo "sh posixexp1.sub: test $? failed"
+${THIS_SH} ./posixexp1.sub || echo "bash posixexp1.sub: test $? failed"
+
+THIS_SH=$TMPDIR/sh ${THIS_SH} ./posixexp2.sub || echo "sh posixexp2.sub: test $? failed"
+rm -f $TMPDIR/sh
+
+${THIS_SH} ./posixexp3.sub
+${THIS_SH} ./posixexp4.sub
+${THIS_SH} ./posixexp5.sub
+${THIS_SH} ./posixexp6.sub
+${THIS_SH} ./posixexp7.sub
+${THIS_SH} ./posixexp8.sub
+
+# this will be an error
+foo=bar
+echo "${foo:-"a}"
diff --git a/tests/posixexp1.sub b/tests/posixexp1.sub
new file mode 100644
index 0000000..c0d6861
--- /dev/null
+++ b/tests/posixexp1.sub
@@ -0,0 +1,51 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# $FreeBSD: src/tools/regression/bin/sh/expansion/set-u1.0,v 1.2 2010/10/12 18:20:38 obrien Exp $
+
+${THIS_SH} -uc 'unset foo; echo ${foo}' 2>/dev/null && exit 1
+${THIS_SH} -uc 'unset foo; echo $foo' 2>/dev/null && exit 1
+${THIS_SH} -uc 'foo=; echo $foo' >/dev/null || exit 2
+${THIS_SH} -uc 'foo=1; echo $foo' >/dev/null || exit 3
+# -/+/= are unaffected by set -u
+${THIS_SH} -uc 'unset foo; echo ${foo-}' >/dev/null || exit 4
+${THIS_SH} -uc 'unset foo; echo ${foo+}' >/dev/null || exit 5
+${THIS_SH} -uc 'unset foo; echo ${foo=}' >/dev/null || exit 6
+# length/trimming are affected
+${THIS_SH} -uc 'unset foo; echo ${#foo}' 2>/dev/null && exit 7
+${THIS_SH} -uc 'foo=; echo ${#foo}' >/dev/null || exit 8
+${THIS_SH} -uc 'unset foo; echo ${foo#?}' 2>/dev/null && exit 9
+${THIS_SH} -uc 'foo=1; echo ${foo#?}' >/dev/null || exit 10
+${THIS_SH} -uc 'unset foo; echo ${foo##?}' 2>/dev/null && exit 11
+${THIS_SH} -uc 'foo=1; echo ${foo##?}' >/dev/null || exit 12
+${THIS_SH} -uc 'unset foo; echo ${foo%?}' 2>/dev/null && exit 13
+${THIS_SH} -uc 'foo=1; echo ${foo%?}' >/dev/null || exit 14
+${THIS_SH} -uc 'unset foo; echo ${foo%%?}' 2>/dev/null && exit 15
+${THIS_SH} -uc 'foo=1; echo ${foo%%?}' >/dev/null || exit 16
+
+${THIS_SH} -uc 'echo $!' 2>/dev/null && exit 17
+${THIS_SH} -uc ':& echo $!' >/dev/null || exit 18
+${THIS_SH} -uc 'echo $#' >/dev/null || exit 19
+${THIS_SH} -uc 'echo $1' 2>/dev/null && exit 20
+${THIS_SH} -uc 'echo $1' ${THIS_SH} xnotthere >/dev/null || exit 21
+${THIS_SH} -uc 'echo $2' ${THIS_SH} xnotthere 2>/dev/null && exit 22
+${THIS_SH} -uc 'echo $2' ${THIS_SH} xnotthere ynotthere >/dev/null || exit 23
+
+${THIS_SH} -uc 'echo $! ; exit 24' 2>/dev/null
+${THIS_SH} -uc 'echo ${!} ; exit 25' 2>/dev/null
+${THIS_SH} -uc 'echo ${!,} ; exit 26' 2>/dev/null
+
+${THIS_SH} -uc 'echo ${!-ok 27} >/dev/null || exit 27'
+${THIS_SH} -uc 'echo ${2-ok 28} >/dev/null || exit 28'
+
+exit 0
diff --git a/tests/posixexp2.right b/tests/posixexp2.right
new file mode 100644
index 0000000..08d3901
--- /dev/null
+++ b/tests/posixexp2.right
@@ -0,0 +1,40 @@
+1 }z
+2 ''z}
+3 foo 'bar baz
+4 foo b   c baz
+5 foo b   c baz
+6 }z
+7 }z
+8 ""z}
+9 "}"z
+10 foo bar} baz
+11 ''z}
+12 }z
+13 }z
+14 }z
+15 <foo abx{ {{{}b c d{} bar> <}> <baz> .
+16 hi there
+17 hi there
+18 hi there
+19 hi there
+20 hi there
+21 hi there
+22 hi there
+23 hi there
+24 'value'
+25 'value'
+26 $key
+27 'value'
+28 'x ~ x''x}"x}" #
+29 <foo> <abx{ {{> <{}b> <c> <d{}> <bar> <}> <baz> .
+30 <foo> <b\
+ar> <baz> .
+32 <foo> <bar> <baz> .
+33 <foo 'bar' baz> .
+34 <foo bar baz> .
+35 <a> <b> <x> <a> <b> .
+36 <a\ b> <x> <a\ b> .
+37 <a b> <x> <c d> .
+38 xay / x'a'y .
+39 x' / x' .
+40 < b c> .
diff --git a/tests/posixexp2.sub b/tests/posixexp2.sub
new file mode 100644
index 0000000..5c46192
--- /dev/null
+++ b/tests/posixexp2.sub
@@ -0,0 +1,37 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+x=a\ b
+[ "$x" = "${x?}" ] || exit 1
+set -- ${x?}
+{ [ "$#" = 2 ] && [ "$1" = a ] && [ "$2" = b ]; } || exit 1
+unset x
+(echo ${x?abcdefg}) 2>&1 | grep abcdefg >/dev/null || exit 1
+${THIS_SH} -c 'unset foo; echo ${foo?}' 2>/dev/null && exit 2
+${THIS_SH} -c 'foo=; echo ${foo:?}' 2>/dev/null && exit 3
+${THIS_SH} -c 'foo=; echo ${foo?}' >/dev/null || exit 4
+${THIS_SH} -c 'foo=1; echo ${foo:?}' >/dev/null || exit 5
+${THIS_SH} -c 'echo ${!?}' 2>/dev/null && exit 6
+${THIS_SH} -c ':& echo ${!?}' >/dev/null || exit 7
+${THIS_SH} -c 'echo ${#?}' >/dev/null || exit 8
+${THIS_SH} -c 'echo ${*?}' 2>/dev/null && exit 9
+${THIS_SH} -c 'echo ${*?}' ${THIS_SH} x >/dev/null || exit 10
+${THIS_SH} -c 'echo ${1?}' 2>/dev/null && exit 11
+${THIS_SH} -c 'echo ${1?}' ${THIS_SH} x >/dev/null || exit 12
+${THIS_SH} -c 'echo ${2?}' ${THIS_SH} x 2>/dev/null && exit 13
+${THIS_SH} -c 'echo ${2?}' ${THIS_SH} x y >/dev/null || exit 14
+
+${THIS_SH} -c $'echo $(( x+ )) \n exit 0' ${THIS_SH} 2>/dev/null && exit 15
+
+exit 0
diff --git a/tests/posixexp2.tests b/tests/posixexp2.tests
new file mode 100644
index 0000000..5f2392b
--- /dev/null
+++ b/tests/posixexp2.tests
@@ -0,0 +1,60 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# From mksh
+
+set -o posix ; shopt -u xpg_echo
+
+(echo 1 ${IFS+'}'z}) 2>&- || echo failed in 1
+(echo 2 "${IFS+'}'z}") 2>&- || echo failed in 2
+(echo 3 "foo ${IFS+'bar} baz") 2>&- || echo failed in 3
+(echo -n '4 '; printf '%s\n' "foo ${IFS+"b   c"} baz") 2>&- || echo failed in 4
+(echo -n '5 '; printf '%s\n' "foo ${IFS+b   c} baz") 2>&- || echo failed in 5
+(echo 6 ${IFS+"}"z}) 2>&- || echo failed in 6
+(echo 7 "${IFS+"}"z}") 2>&- || echo failed in 7
+(echo 8 "${IFS+\"}\"z}") 2>&- || echo failed in 8
+(echo 9 "${IFS+\"\}\"z}") 2>&- || echo failed in 9
+(echo 10 foo ${IFS+'bar} baz'}) 2>&- || echo failed in 10
+(echo 11 "$(echo "${IFS+'}'z}")") 2>&- || echo failed in 11
+(echo 12 "$(echo ${IFS+'}'z})") 2>&- || echo failed in 12
+(echo 13 ${IFS+\}z}) 2>&- || echo failed in 13
+(echo 14 "${IFS+\}z}") 2>&- || echo failed in 14
+u=x; (echo -n '15 '; printf '<%s> ' "foo ${IFS+a"b$u{ {"{{\}b} c ${IFS+d{}} bar" ${IFS-e{}} baz; echo .) 2>&- || echo failed in 15
+l=t; (echo 16 ${IFS+h`echo -n i ${IFS+$l}h`ere}) 2>&- || echo failed in 16
+l=t; (echo 17 ${IFS+h$(echo -n i ${IFS+$l}h)ere}) 2>&- || echo failed in 17
+l=t; (echo 18 "${IFS+h`echo -n i ${IFS+$l}h`ere}") 2>&- || echo failed in 18
+l=t; (echo 19 "${IFS+h$(echo -n i ${IFS+$l}h)ere}") 2>&- || echo failed in 19
+l=t; (echo 20 ${IFS+h`echo -n i "${IFS+$l}"h`ere}) 2>&- || echo failed in 20
+l=t; (echo 21 ${IFS+h$(echo -n i "${IFS+$l}"h)ere}) 2>&- || echo failed in 21
+l=t; (echo 22 "${IFS+h`echo -n i "${IFS+$l}"h`ere}") 2>&- || echo failed in 22
+l=t; (echo 23 "${IFS+h$(echo -n i "${IFS+$l}"h)ere}") 2>&- || echo failed in 23
+key=value; (echo -n '24 '; printf '%s\n' "${IFS+'$key'}") 2>&- || echo failed in 24
+key=value; (echo -n '25 '; printf '%s\n' "${IFS+"'$key'"}") 2>&- || echo failed in 25	# ksh93: “'$key'�
+key=value; (echo -n '26 '; printf '%s\n' ${IFS+'$key'}) 2>&- || echo failed in 26
+key=value; (echo -n '27 '; printf '%s\n' ${IFS+"'$key'"}) 2>&- || echo failed in 27
+(echo -n '28 '; printf '%s\n' "${IFS+"'"x ~ x'}'x"'}"x}" #') 2>&- || echo failed in 28
+u=x; (echo -n '29 '; printf '<%s> ' foo ${IFS+a"b$u{ {"{ {\}b} c ${IFS+d{}} bar ${IFS-e{}} baz; echo .) 2>&- || echo failed in 29
+(echo -n '30 '; printf '<%s> ' ${IFS+foo 'b\
+ar' baz}; echo .) 2>&- || (echo failed in 30; echo failed in 31)
+(echo -n '32 '; printf '<%s> ' ${IFS+foo "b\
+ar" baz}; echo .) 2>&- || echo failed in 32
+(echo -n '33 '; printf '<%s> ' "${IFS+foo 'b\
+ar' baz}"; echo .) 2>&- || echo failed in 33
+(echo -n '34 '; printf '<%s> ' "${IFS+foo "b\
+ar" baz}"; echo .) 2>&- || echo failed in 34
+(echo -n '35 '; printf '<%s> ' ${v=a\ b} x ${v=c\ d}; echo .) 2>&- || echo failed in 35
+(echo -n '36 '; printf '<%s> ' "${v=a\ b}" x "${v=c\ d}"; echo .) 2>&- || echo failed in 36
+(echo -n '37 '; printf '<%s> ' ${v-a\ b} x ${v-c\ d}; echo .) 2>&- || echo failed in 37
+(echo 38 ${IFS+x'a'y} / "${IFS+x'a'y}" .) 2>&- || echo failed in 38
+foo="x'a'y"; (echo 39 ${foo%*'a'*} / "${foo%*'a'*}" .) 2>&- || echo failed in 39
+foo="a b c"; (echo -n '40 '; printf '<%s> ' "${foo#a}"; echo .) 2>&- || echo failed in 40
diff --git a/tests/posixexp3.sub b/tests/posixexp3.sub
new file mode 100644
index 0000000..343adfe
--- /dev/null
+++ b/tests/posixexp3.sub
@@ -0,0 +1,65 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+set -- 1 2
+
+unset var
+recho ${var-$@}
+recho ${var-"$@"}
+recho ${var-$*}
+recho ${var-"$*"}
+
+unset -v a b c d
+recho ${a=$@}
+recho "$a"
+recho ${b="$@"}
+recho "$b"
+recho ${c=$*}
+recho "$c"
+recho ${d="$*"}
+recho "$d"
+
+IFS=
+unset var
+recho ${var-$@}
+recho ${var-"$@"}
+recho ${var-$*}
+recho ${var-"$*"}
+
+unset -v a b c d
+# Posix interp 221
+# there should never be any word splitting because IFS is null
+recho ${a=$@}
+recho "$a"
+recho $a
+recho ${b="$@"}
+recho "$b"
+recho $b
+recho ${c=$*}
+recho "$c"
+recho $c
+recho ${d="$*"}
+recho "$d"
+recho $d
+
+unset -v a b c d
+a=$@
+recho $a
+b="$@"
+recho $b
+c=$*
+recho $c
+d="$*"
+recho $d
+
+unset -v parameter a b c d
diff --git a/tests/posixexp4.sub b/tests/posixexp4.sub
new file mode 100644
index 0000000..9d48b2f
--- /dev/null
+++ b/tests/posixexp4.sub
@@ -0,0 +1,44 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+set -- ' abc' 'def ghi' 'jkl '
+
+echo normal IFS
+recho $@
+: ${var=$@}
+recho $var
+unset -v var
+recho ${var-$@}
+
+echo null IFS
+IFS=
+recho $@
+: ${var=$@}
+recho $var
+unset -v var
+recho ${var-$@}
+
+echo non-standard IFS
+IFS=:
+recho $@
+: ${var=$@}
+recho $var
+unset -v var
+recho ${var-$@}	# this is inconsistent
+
+echo unset IFS
+recho $@
+: ${var=$@}
+recho $var
+unset -v var
+recho ${var-$@}
diff --git a/tests/posixexp5.sub b/tests/posixexp5.sub
new file mode 100644
index 0000000..b0e1c03
--- /dev/null
+++ b/tests/posixexp5.sub
@@ -0,0 +1,64 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# test suite contribution from Martijn Dekker
+
+defaultIFS=$IFS
+set -o errexit -o noglob
+(set -o pipefail) 2>/dev/null && set -o pipefail
+teststring=$(printf '\1\2\3\177')
+n=0
+
+trim_od() {
+	od -t a | sed -n '1 { s/^0*[[:blank:]]*//; s/[[:blank:]]*$//; p; }'
+}
+
+doTest() {
+	set -- "$teststring"
+	eval "$testcmd"
+	case ${IFS+s}${IFS:+n} in
+	( sn )	i=$(printf %s "$IFS" | trim_od) ;;
+	( s )	i='(null)' ;;
+	( '' )	i='(unset)' ;;
+	( * )	echo 'internal error!' >&2; exit 125 ;;
+	esac
+	printf '\n%03d: IFS = %s: %s\n' "$((n+=1))" "$i" "$testcmd"
+	printf %s "$*${foo+/}${foo-}" | trim_od
+}
+
+doAllTests() {
+	for testcmd in \
+		'unset -v foo; set -- ${foo=$*}' \
+		'unset -v foo; set -- ${foo="$*"}' \
+		'unset -v foo; set -- "${foo=$*}"' \
+		\
+		'foo=; set -- ${foo:=$*}' \
+		'foo=; set -- ${foo:="$*"}' \
+		'foo=; set -- "${foo:=$*}"' \
+		\
+		'unset -v foo; set -- ${foo=$@}' \
+		'unset -v foo; set -- ${foo="$@"}' \
+		'unset -v foo; set -- "${foo=$@}"' \
+		\
+		'foo=; set -- ${foo:=$@}' \
+		'foo=; set -- ${foo:="$@"}' \
+		'foo=; set -- "${foo:=$@}"'
+	do
+		doTest "$testcmd"
+	done
+}
+
+unset -v IFS; doAllTests
+IFS=''; doAllTests
+IFS='x'; doAllTests
+IFS=$defaultIFS; doAllTests
diff --git a/tests/posixexp6.sub b/tests/posixexp6.sub
new file mode 100644
index 0000000..b89b87f
--- /dev/null
+++ b/tests/posixexp6.sub
@@ -0,0 +1,70 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+var=$'\01\02\03\177'
+
+bar=${unset:-$var}
+recho "$bar"
+unset -v bar
+bar=${unset:-"$var"}
+recho "$bar"
+
+foo=${parameter:=$var}
+
+recho "$foo"
+recho "$parameter"
+
+unset -v foo parameter
+
+foo=${parameter:="$var"}
+
+recho "$foo"
+recho "$parameter"
+
+unset -v foo parameter
+
+foo="${parameter:=$var}"
+
+recho "$foo"
+recho "$parameter"
+
+unset -v foo parameter
+
+recho ${parameter:=a\ b}
+unset -v parameter
+
+recho ${parameter:="a b"}
+unset -v parameter
+
+v='a b'
+
+recho ${parameter:=$v}
+unset -v parameter
+
+recho ${parameter:="$v"}
+unset -v parameter
+
+# unsetting IFS here
+
+set "  abc  " " def  ghi " "jkl "
+unset -v IFS var
+var=${var-$*}/${var-$*}
+printf '[%s]\n' "$var"
+
+unset -v var
+: ${var=$*}
+printf '[%s]\n' "$var"
+
+unset -v var
+: ${var:=$*/$*/${var-$*}}
+printf '[%s]\n' "$var"
diff --git a/tests/posixexp7.sub b/tests/posixexp7.sub
new file mode 100644
index 0000000..2e230cf
--- /dev/null
+++ b/tests/posixexp7.sub
@@ -0,0 +1,13 @@
+# test the effect of quotes on the WORD in the posix pattern removal operators
+# a here document does not behave the same as double quotes
+x=notOK
+cat <<EOF
+5: ${x#$'not'}
+EOF
+
+echo "${x#'not'}"
+echo "${x#$'not'}"
+
+cat <<EOF
+5: $'not\ttoo\nbad'
+EOF
diff --git a/tests/posixexp8.sub b/tests/posixexp8.sub
new file mode 100644
index 0000000..383851c
--- /dev/null
+++ b/tests/posixexp8.sub
@@ -0,0 +1,11 @@
+P=A
+
+cat << EOF
+${P+\"$P\"}
+${P+"$P"}
+EOF
+
+recho "${P+\"$P\"}"
+
+recho "${P+"$P"}"
+recho ${P+"$P"}
diff --git a/tests/posixpat.right b/tests/posixpat.right
new file mode 100644
index 0000000..deb01bf
--- /dev/null
+++ b/tests/posixpat.right
@@ -0,0 +1,42 @@
+ok 1
+ok 2
+ok 3
+ok 4
+ok 5
+ok 6
+ok 7
+ok 8
+ok 9
+ok 10
+ok 11
+ok 12
+ok 13
+ok 14
+ok 15
+ok 16
+ok 17
+ok 18
+ok 19
+ok 20
+ok 21
+ok -- space
+ok -- blank
+ok 1
+ok 2
+ok 3
+ok 4
+ok 5
+ok 6
+ok 7
+ok 8
+ok 9
+ok 10
+ok 11
+ok 12
+ok 13
+ok 14
+ok 15
+ok 16
+ok 1
+ok 2
+ok 3
diff --git a/tests/posixpat.tests b/tests/posixpat.tests
new file mode 100644
index 0000000..5a7bafd
--- /dev/null
+++ b/tests/posixpat.tests
@@ -0,0 +1,247 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# A test suite for the POSIX.2 (BRE) pattern matching code
+LC_ALL=C
+LANG=C
+
+# First, test POSIX.2 character classes
+
+case e in
+[[:xdigit:]])	echo ok 1;;
+esac
+
+case a in
+[[:alpha:]123])	echo ok 2;;
+esac
+
+case 1 in
+[[:alpha:]123])	echo ok 3;;
+esac
+
+case 9 in
+[![:alpha:]])	echo ok 4;;
+esac
+
+case a in
+[:al:])		echo ok 5;;
+esac
+
+# invalid character class expressions are no longer just characters to be
+# matched
+case a in
+[[:al:])	echo bad 6;;
+*)		echo ok 6;;
+esac
+
+case '!' in
+[abc[:punct:][0-9])	echo ok 7;;
+esac
+
+# let's try to match the start of a valid sh identifier
+case 'PATH' in
+[_[:alpha:]]*)	echo ok 8;;
+esac
+
+# let's try to match the first two characters of a valid sh identifier
+case PATH in
+[_[:alpha:]][_[:alnum:]]*)	echo ok 9;;
+esac
+
+# is ^C a cntrl character?
+case $'\003' in
+[[:cntrl:]])	echo ok 10;;
+esac
+
+# how about A?
+case A in
+[[:cntrl:]])	echo oops -- cntrl ;;
+*)		echo ok 11;;
+esac
+
+case 9 in
+[[:digit:]])	echo ok 12;;
+esac
+
+case X in
+[[:digit:]])	echo oops -- digit;;
+*)		echo ok 13;;
+esac
+
+case $'\033' in
+[[:graph:]])	echo oops -- graph;;
+*)		echo ok 14;;
+esac
+
+case $'\040' in
+[[:graph:]])	echo oops -- graph 2;;
+*)		echo ok 15;;
+esac
+
+case ' ' in
+[[:graph:]])	echo oops -- graph 3;;
+*)		echo ok 16;;
+esac
+
+case 'aB' in
+[[:lower:]][[:upper:]])	echo ok 17;;
+esac
+
+case $'\040' in
+[[:print:]])	echo ok 18;;
+*)		echo oops -- print;;
+esac
+
+case PS3 in
+[_[:alpha:]][_[:alnum:]][_[:alnum:]]*)	echo ok 19;;
+esac
+
+case a in
+[[:alpha:][:digit:]])	echo ok 20;;
+*)			echo oops - skip brackpat ;;
+esac
+
+case a in
+[[:alpha:]\])	echo oops -- dangling backslash in brackpat ;;
+*)		echo ok 21 ;;
+esac
+
+# what's a newline?  is it a blank? a space?
+case $'\n' in
+[[:blank:]])	echo ok -- blank ;;
+[[:space:]])	echo ok -- space ;;
+*)		echo oops newline ;;
+esac
+
+# OK, what's a tab?  is it a blank? a space?
+case $'\t' in
+[[:blank:]])	echo ok -- blank ;;
+[[:space:]])	echo ok -- space ;;
+*)		echo oops newline ;;
+esac
+
+# let's check out characters in the ASCII range
+case $'\377' in
+[[:ascii:]])	echo oops -- ascii\?;;
+esac
+
+case 9 in
+[1[:alpha:]123]) echo oops 1;;
+esac
+
+# however, an unterminated brace expression containing a valid char class
+# that matches had better fail
+case a in
+[[:alpha:])	echo oops 2;;
+esac
+
+case $'\b' in
+[[:graph:]])	echo oops 3;;
+esac
+
+case $'\b' in
+[[:print:]])	echo oops 4;;
+esac
+
+case $' ' in
+[[:punct:]])	echo oops 5;;
+esac
+
+# Next, test POSIX.2 collating symbols
+
+case 'a' in
+[[.a.]])	echo ok 1;;
+esac
+
+case '-' in
+[[.hyphen.]-9])	echo ok 2;;
+esac
+
+case 'p' in
+[[.a.]-[.z.]])	echo ok 3;;
+esac
+
+case '-' in
+[[.-.]])	echo ok 4;;
+esac
+
+case ' ' in
+[[.space.]])	echo ok 5;;
+esac
+
+case ' ' in
+[[.grave-accent.]])	echo oops - grave;;
+*)		echo ok 6;;
+esac
+
+case '4' in
+[[.-.]-9])	echo ok 7;;
+esac
+
+# an invalid collating symbol cannot be the first part of a range
+case 'c' in
+[[.yyz.]-[.z.]])	echo oops - yyz;;
+*)		echo ok 8;;
+esac
+
+case 'c' in
+[[.yyz.][.a.]-z])   echo ok 9;;
+esac
+
+# but when not part of a range is not an error
+case 'c' in
+[[.yyz.][.a.]-[.z.]])   echo ok 10 ;;
+esac
+
+case 'p' in
+[[.a.]-[.Z.]])		echo oops -- bad range ;; 
+*)			echo ok 11;;
+esac
+
+case p in
+[[.a.]-[.zz.]p])	echo ok 12;;
+*)			echo oops -- bad range 2;;
+esac
+
+case p in
+[[.aa.]-[.z.]p])	echo ok 13;;
+*)			echo oops -- bad range 3;;
+esac
+
+case c in
+[[.yyz.]cde])		echo ok 14;;
+esac
+
+case abc in
+[[.cb.]a-Za]*)		echo ok 15;;
+esac
+
+case $'\t' in
+[[.space.][.tab.][.newline.]])	echo ok 16;;
+esac
+
+# and finally, test POSIX.2 equivalence classes
+
+case "abc" in
+[[:alpha:]][[=b=]][[:ascii:]])	echo ok 1;;
+esac
+
+case "abc" in
+[[:alpha:]][[=B=]][[:ascii:]])	echo oops -- =B=;;
+*)	echo ok 2 ;;
+esac
+
+case a in
+[[=b=])		echo oops;;	# an incomplete equiv class is just a string
+*)		echo ok 3;;
+esac
diff --git a/tests/posixpipe.right b/tests/posixpipe.right
new file mode 100644
index 0000000..8f6c9cb
--- /dev/null
+++ b/tests/posixpipe.right
@@ -0,0 +1,41 @@
+1
+0
+a
+real 0.00
+user 0.00
+sys 0.00
+1
+a
+real 0.00
+user 0.00
+sys 0.00
+1
+tfunc is a function
+tfunc () 
+{ 
+    time 
+}
+1
+0
+1
+a
+real 0.00
+user 0.00
+sys 0.00
+0
+a
+real 0.00
+user 0.00
+sys 0.00
+0
+a
+real 0.00
+user 0.00
+sys 0.00
+0
+1
+0
+a
+real 0.00
+user 0.00
+sys 0.00
diff --git a/tests/posixpipe.tests b/tests/posixpipe.tests
new file mode 100644
index 0000000..fa8febe
--- /dev/null
+++ b/tests/posixpipe.tests
@@ -0,0 +1,56 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# Test timed and negated pipelines in bash-4.2 and later
+export TIMEFORMAT=$'real %2R\nuser %2U\nsys %2S'
+
+!
+echo $?
+
+! !
+echo $?
+
+time ! echo a
+echo $?
+
+! time echo a
+echo $?
+
+tfunc()
+{
+	time
+}
+
+type tfunc
+
+! true
+echo $?
+! ! true
+echo $?
+! ! ! true
+echo $?
+
+time time echo a
+echo $?
+
+time time -p echo a
+echo $?
+time -p time echo a
+echo $?
+
+!
+echo $?
+! !
+echo $?
+
+time -p -- echo a
diff --git a/tests/prec.right b/tests/prec.right
new file mode 100644
index 0000000..e6af552
--- /dev/null
+++ b/tests/prec.right
@@ -0,0 +1,28 @@
+`Say' echos its argument. Its return value is of no interest.
+`Truth' echos its argument and returns a TRUE result.
+`False' echos its argument and returns a FALSE result.
+
+  Truth 1 && Truth 2   || Say 3   output=12
+( Truth 1 && Truth 2 ) || Say 3   output=12
+
+  Truth 1 && False 2   || Say 3   output=123
+( Truth 1 && False 2 ) || Say 3   output=123
+
+  False 1 && Truth 2   || Say 3   output=13
+( False 1 && Truth 2 ) || Say 3   output=13
+
+  False 1 && False 2   || Say 3   output=13
+( False 1 && False 2 ) || Say 3   output=13
+
+Truth 1 ||   Truth 2 && Say 3     output=13
+Truth 1 || ( Truth 2 && Say 3 )   output=1
+
+Truth 1 ||   False 2 && Say 3     output=13
+Truth 1 || ( False 2 && Say 3 )   output=1
+
+False 1 ||   Truth 2 && Say 3     output=123
+False 1 || ( Truth 2 && Say 3 )   output=123
+
+False 1 ||   False 2 && Say 3     output=12
+False 1 || ( False 2 && Say 3 )   output=12
+
diff --git a/tests/precedence.tests b/tests/precedence.tests
new file mode 100755
index 0000000..111bd23
--- /dev/null
+++ b/tests/precedence.tests
@@ -0,0 +1,90 @@
+# @(#)precedence_test 1.0 91/07/24 Maarten Litmaath
+
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+# test of relative precedences for `&&' and `||' operators
+
+echo "\`Say' echos its argument. Its return value is of no interest."
+case `echo -n` in
+  '') Say () { echo -n "$*" ; } ;;
+   *) Say () { echo "$*\c" ; } ;;
+esac
+
+echo "\`Truth' echos its argument and returns a TRUE result."
+Truth () {
+  Say $1;
+  return 0;
+}
+
+echo "\`False' echos its argument and returns a FALSE result."
+False () {
+  Say $1;
+  return 1;
+}
+
+echo ""
+
+cmd1='$open $test1 && $test2 $close || $test3'
+cmd2='$test1 || $open $test2 && $test3 $close'
+
+grouping_sh=
+grouping_C='( )'
+
+test3='Say 3'
+
+for i in 1 2
+do
+   eval proto=\$cmd$i
+
+   for test1 in 'Truth 1' 'False 1'
+   do
+      for test2 in 'Truth 2' 'False 2'
+      do
+	 for precedence in sh C
+	 do
+	    eval set x \$grouping_$precedence
+	    shift
+	    open=${1-' '}
+	    close=${2-' '}
+	    eval cmd=\""$proto"\"
+	    Say "$cmd   output="
+	    output=`eval "$cmd"`
+	    Say "$output"
+	    read correct || { echo 'Input fubar.  Abort.' >&2; exit 1; }
+	    test "X$output" = "X$correct" || echo "   correct=$correct"
+	    echo ''
+	 done
+
+	 echo ''
+      done
+   done
+done << EOF
+12
+12
+123
+123
+13
+13
+13
+13
+13
+1
+13
+1
+123
+123
+12
+12
+EOF
diff --git a/tests/printf.right b/tests/printf.right
new file mode 100644
index 0000000..b032dcb
--- /dev/null
+++ b/tests/printf.right
@@ -0,0 +1,298 @@
+printf: usage: printf [-v var] format [arguments]
+printf: usage: printf [-v var] format [arguments]
+10
+	one
+one\ctwo
+4\.2
+no newline now newline
+%
+%
+%d
+A
+unquoted
+unquoted quoted
+unquoted    quoted
+this\&that
+1 2 3 4 5 
+onestring 0 0 0
+onestring 0 0 0.00
+--4.2 --
+--4.2 --
+--
+^@81--
+--	A--
+--	A--
+A7
+A7
+A7
+A7
+A7
+--\"abcd\"--
+--\'abcd\'--
+--a\x--
+./printf.tests: line 95: printf: missing hex digit for \x
+--\x--
+----
+----
+--4.2
+--4\.2--
+--\--
+
+ 
+    4.4BSD
+    4.4BSD
+    4.4BSD
+    4.4BSD
+4.4BSD
+4.4BSD
+    4.4BSD
+--4.4BSD    --
+  4.
+4.4
+--4.4BSD  --
+255 255 255 0377 0xff 0xFF
+255 255 255 0377 0xff 0XFF
+255 255 255 0377 0xff 0xFF
+255 255 255 0377 0xff 0XFF
+        42
+       -42
+        42
+       -42
+4.20
+4.20
+ 4.2
+4.20
+4.20
+ 4.2
+4.200000E+00
+4.200000e+00
+4.2E+00
+4.2e+00
+4.2
+4.2
+   4.2
+   4.2
+115
+115
+0163
+0163
+0x73
+0X73
+115.00
+115.00
+--  abcd--
+--  abcd--
+--  abcdefghij--
+--  abcdefghij--
+'abcd'
+\'abcd\'
+\abcd\
+\abcd\
+26
+26
+26
+./printf.tests: line 219: printf: `%10': missing format character
+./printf.tests: line 220: printf: `M': invalid format character
+ab./printf.tests: line 223: printf: `y': invalid format character
+./printf.tests: line 226: printf: GNU: invalid number
+0
+./printf.tests: line 227: printf: GNU: invalid number
+0
+-
+(foo )(bar )
+0
+  ab cd ef  
+13
+^G
+^G
+^@7
+^Ge
+"?
+00001
+00001
+    1
+1
+0
+0
+   0
+   0
+4
+4
+   4
+   4
+0.000000
+0.000000
+0.00
+0.00
+4.000000
+4.000000
+4.00
+4.00
+0.000000E+00
+0.000000e+00
+0.00E+00
+0.00e+00
+4.000000E+00
+4.000000e+00
+4.00E+00
+4.00e+00
+9B3A59A5
+q
+''
+''
+s
+
+
+b
+
+
+xx
+xx
+<   ><   >
+	one
+one\ctwo
+4\.2
+no newline now newline
+%
+%
+%d
+A
+unquoted
+unquoted quoted
+unquoted    quoted
+this\&that
+1 2 3 4 5 
+onestring 0 0 0
+onestring 0 0 0.00
+--4.2 --
+--4.2 --
+--	A--
+--	A--
+A7
+A7
+A7
+--\"abcd\"--
+--\'abcd\'--
+--a\x--
+./printf1.sub: line 107: printf: missing hex digit for \x
+--\x--
+----
+----
+--4.2
+--4\.2--
+--\--
+
+ 
+    4.4BSD
+    4.4BSD
+    4.4BSD
+    4.4BSD
+4.4BSD
+4.4BSD
+    4.4BSD
+--4.4BSD    --
+  4.
+4.4
+--4.4BSD  --
+255 255 255 0377 0xff 0xFF
+255 255 255 0377 0xff 0XFF
+255 255 255 0377 0xff 0xFF
+255 255 255 0377 0xff 0XFF
+        42
+       -42
+        42
+       -42
+4.20
+4.20
+ 4.2
+4.20
+4.20
+ 4.2
+4.200000E+00
+4.200000e+00
+4.2E+00
+4.2e+00
+4.2
+4.2
+   4.2
+   4.2
+115
+115
+0163
+0163
+0x73
+0X73
+115.00
+115.00
+--  abcd--
+--  abcd--
+--  abcdefghij--
+--  abcdefghij--
+'abcd'
+\'abcd\'
+\abcd\
+\abcd\
+26
+26
+26
+./printf1.sub: line 293: printf: `%10': missing format character
+./printf1.sub: line 294: printf: `M': invalid format character
+./printf1.sub: line 297: printf: `y': invalid format character
+./printf1.sub: line 300: printf: GNU: invalid number
+0
+./printf1.sub: line 302: printf: GNU: invalid number
+0
+-
+(foo )(bar )
+0
+  ab cd ef  
+13
+^G
+^G
+^Ge
+"?
+16:09:15
+./printf3.sub: line 27: printf: warning: `Z': invalid time format specification
+%(abde)Z
+30-May-2010 16:09:15
+05/30/10 15:09:15
+current time: 2010-05-30 04:09:15 PM
+epoch time: 1969-12-31 07:00:00 PM -0500
+random time: 2010-05-30 04:09:15 PM -0400
+local time: Sun May 30 16:09:15 EDT 2010
+Sun May 30 16:09:15 EDT 2010             date-style time
+05/30/10 (foo) 16:09:15                  date-style time
+x       123x
+x       123x
+x       123x
+x       123x
+x       123x
+x       123x
+x    123.00x
+x    123.00x
+x    123.00x
+x    123.00x
+x123       x
+x123       x
+x+00001e+02x
+x+00001e+02x
+x+000000123x
+x+000000123x
+x+00001e+02x
+x+00001e+02x
+x      +123x
+x      +123x
+x      +123x
+x      +123x
+x        7bx
+x        7bx
+x+123      x
+x+123      x
+x+123      x
+x+123      x
+-123.000000
+-123.000000
+x      +123x
+x      +123x
+x      +123x
+x      +123x
diff --git a/tests/printf.tests b/tests/printf.tests
new file mode 100644
index 0000000..df37e47
--- /dev/null
+++ b/tests/printf.tests
@@ -0,0 +1,334 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+LC_ALL=C
+LC_NUMERIC=C
+
+# these should output error messages -- the format is required
+printf
+printf --
+
+# these should output nothing
+printf ""
+printf -- ""
+
+# in the future this may mean to put the output into VAR, but for
+# now it is an error
+# 2005-03-15 no longer an error
+unset var
+printf -v var "%10d" $RANDOM
+echo ${#var}
+
+# this should expand escape sequences in the format string, nothing else
+printf "\tone\n"
+
+# this should not cut off output after the \c
+printf "one\ctwo\n"
+
+# and unrecognized backslash escapes should have the backslash preserverd
+printf "4\.2\n"
+
+printf "no newline " ; printf "now newline\n"
+
+# %% -> %
+printf "%%\n"
+
+# this was a bug caused by pre-processing the string for backslash escapes
+# before doing the `%' format processing -- all versions before bash-2.04
+printf "\045" ; echo
+printf "\045d\n"
+
+# simple character output
+printf "%c\n" ABCD
+
+# test simple string output
+printf "%s\n" unquoted
+
+# test quoted string output
+printf "%s %q\n" unquoted quoted
+printf "%s%10q\n" unquoted quoted
+
+printf "%q\n" 'this&that'
+
+# make sure the format string is reused to use up arguments
+printf "%d " 1 2 3 4 5; printf "\n"
+
+# make sure that extra format characters get null arguments
+printf "%s %d %d %d\n" onestring
+
+printf "%s %d %u %4.2f\n" onestring
+
+printf -- "--%s %s--\n" 4.2 ''
+printf -- "--%s %s--\n" 4.2
+
+# test %b escapes
+
+# 8 is a non-octal digit, so the `81' should be output
+printf -- "--%b--\n" '\n\081'
+
+printf -- "--%b--\n" '\t\0101'
+printf -- "--%b--\n" '\t\101'
+
+# these should all display `A7'
+echo -e "\01017"
+echo -e "\x417"
+
+printf "%b\n" '\01017'
+printf "%b\n" '\1017'
+printf "%b\n" '\x417'
+
+printf -- "--%b--\n" '\"abcd\"'
+printf -- "--%b--\n" "\'abcd\'"
+
+printf -- "--%b--\n" 'a\\x'
+
+printf -- "--%b--\n" '\x'
+
+Z1=$(printf -- "%b\n" '\a\b\e\f\r\v')
+Z2=$'\a\b\e\f\r\v'
+
+if [ "$Z1" != "$Z2" ]; then
+	echo "whoops: printf %b and $'' differ" >&2
+fi
+unset Z1 Z2
+
+printf -- "--%b--\n" ''
+printf -- "--%b--\n"
+
+# the stuff following the \c should be ignored, as well as the rest
+# of the format string
+printf -- "--%b--\n" '4.2\c5.4\n'; printf "\n"
+
+# unrecognized escape sequences should by displayed unchanged
+printf -- "--%b--\n" '4\.2'
+
+# a bare \ should not be processed as an escape sequence
+printf -- "--%b--\n" '\'
+
+# make sure extra arguments are ignored if the format string doesn't
+# actually use them
+printf "\n" 4.4 BSD
+printf " " 4.4 BSD ; printf "\n"
+
+# make sure that a fieldwidth and precision of `*' are handled right
+printf "%10.8s\n" 4.4BSD
+printf "%*.*s\n" 10 8 4.4BSD
+
+printf "%10.8q\n" 4.4BSD
+printf "%*.*q\n" 10 8 4.4BSD
+
+printf "%6b\n" 4.4BSD
+printf "%*b\n" 6 4.4BSD
+
+# we handle this crap with homemade code in printf.def
+printf "%10b\n" 4.4BSD
+printf -- "--%-10b--\n" 4.4BSD
+printf "%4.2b\n" 4.4BSD
+printf "%.3b\n" 4.4BSD
+printf -- "--%-8b--\n" 4.4BSD
+
+# test numeric conversions -- these four lines should echo identically
+printf "%d %u %i 0%o 0x%x 0x%X\n" 255 255 255 255 255 255
+printf "%d %u %i %#o %#x %#X\n" 255 255 255 255 255 255
+
+printf "%ld %lu %li 0%o 0x%x 0x%X\n" 255 255 255 255 255 255
+printf "%ld %lu %li %#o %#x %#X\n" 255 255 255 255 255 255
+
+printf "%10d\n" 42
+printf "%10d\n" -42
+
+printf "%*d\n" 10 42
+printf "%*d\n" 10 -42
+
+# test some simple floating point formats
+printf "%4.2f\n" 4.2
+printf "%#4.2f\n" 4.2
+printf "%#4.1f\n" 4.2
+
+printf "%*.*f\n" 4 2 4.2
+printf "%#*.*f\n" 4 2 4.2
+printf "%#*.*f\n" 4 1 4.2
+
+printf "%E\n" 4.2
+printf "%e\n" 4.2
+printf "%6.1E\n" 4.2
+printf "%6.1e\n" 4.2
+
+printf "%G\n" 4.2
+printf "%g\n" 4.2
+printf "%6.2G\n" 4.2
+printf "%6.2g\n" 4.2
+
+# test some of the more esoteric features of POSIX.1 printf
+printf "%d\n" "'string'"
+printf "%d\n" '"string"'
+
+printf "%#o\n" "'string'"
+printf "%#o\n" '"string"'
+
+printf "%#x\n" "'string'"
+printf "%#X\n" '"string"'
+
+printf "%6.2f\n" "'string'"
+printf "%6.2f\n" '"string"'
+
+# output from these two lines had better be the same
+printf -- "--%6.4s--\n" abcdefghijklmnopqrstuvwxyz
+printf -- "--%6.4b--\n" abcdefghijklmnopqrstuvwxyz
+
+# and these two also
+printf -- "--%12.10s--\n" abcdefghijklmnopqrstuvwxyz
+printf -- "--%12.10b--\n" abcdefghijklmnopqrstuvwxyz
+
+# tests for translating \' to ' and \\ to \
+# printf translates \' to ' in the format string...
+printf "\'abcd\'\n"
+
+# but not when the %b format specification is used
+printf "%b\n" \\\'abcd\\\'
+
+# but both translate \\ to \
+printf '\\abcd\\\n'
+printf "%b\n" '\\abcd\\'
+
+# this was reported as a bug in bash-2.03
+# these three lines should all echo `26'
+printf "%d\n" 0x1a
+printf "%d\n" 032
+printf "%d\n" 26
+
+# error messages
+
+# this should be an overflow, but error messages vary between systems
+# printf "%lu\n" 4294967296
+
+# ...but we cannot use this because some systems (SunOS4, for example),
+# happily ignore overflow conditions in strtol(3)
+#printf "%ld\n" 4294967296
+
+printf "%10"
+printf "ab%Mcd\n"
+
+# this caused an infinite loop in older versions of printf
+printf "%y" 0
+
+# these should print a warning and `0', according to POSIX.2
+printf "%d\n" GNU
+printf "%o\n" GNU
+
+# failures in all bash versions through bash-2.05
+printf "%.0s" foo
+printf "%.*s" 0 foo
+
+printf '%.0b-%.0s\n' foo bar
+printf '(%*b)(%*s)\n' -4 foo -4 bar
+
+format='%'`printf '%0100384d' 0`'d\n' 
+printf $format 0
+
+# failures in all bash versions through bash-3.0 - undercounted characters
+unset vv
+printf "  %s %s %s  \n%n" ab cd ef vv
+echo "$vv"
+
+# this doesn't work with printf(3) on all systems
+#printf "%'s\n" foo
+
+# test cases from an austin-group list discussion
+# prints ^G as an extension
+printf '%b\n' '\7'
+
+# prints ^G
+printf '%b\n' '\0007'
+
+# prints NUL then 7
+printf '\0007\n'
+
+# prints no more than two hex digits
+printf '\x07e\n'
+
+# additional backslash escapes
+printf '\"\?\n'
+
+# failures with decimal precisions until after bash-3.1
+printf '%0.5d\n' 1
+
+printf '%05d\n' 1
+printf '%5d\n' 1
+printf '%0d\n' 1
+
+# failures with various floating point formats and 0 after bash-3.2
+
+printf "%G\n" 0
+printf "%g\n" 0
+printf "%4.2G\n" 0
+printf "%4.2g\n" 0
+
+printf "%G\n" 4
+printf "%g\n" 4
+printf "%4.2G\n" 4
+printf "%4.2g\n" 4
+
+printf "%F\n" 0
+printf "%f\n" 0
+printf "%4.2F\n" 0
+printf "%4.2f\n" 0
+
+printf "%F\n" 4
+printf "%f\n" 4
+printf "%4.2F\n" 4
+printf "%4.2f\n" 4
+
+printf "%E\n" 0
+printf "%e\n" 0
+printf "%4.2E\n" 0
+printf "%4.2e\n" 0
+
+printf "%E\n" 4
+printf "%e\n" 4
+printf "%4.2E\n" 4
+printf "%4.2e\n" 4
+
+printf "%08X\n" 2604292517
+
+# make sure these format specifiers all output '' for empty string arguments
+echo q
+printf "%q\n" ""
+printf "%q\n"
+
+echo s
+printf "%s\n" ''
+printf "%s\n"
+
+echo b
+printf "%b\n" ''
+printf "%b\n"
+
+# bug in bash versions up to and including bash-3.2
+v=yyy
+printf -v var "%s" '/current/working/directory/*.@(m3|i3|ig|mg)'
+shopt -s nullglob extglob
+echo "x$(printf "%b" @(hugo))x"
+printf -v var "%b" @(hugo); echo "x${var}x"
+
+# make sure that missing arguments are always handled like the empty string
+printf "<%3s><%3b>\n"
+
+# tests variable assignment with -v
+${THIS_SH} ./printf1.sub
+
+${THIS_SH} ./printf2.sub
+
+${THIS_SH} ./printf3.sub
+
+${THIS_SH} ./printf4.sub
diff --git a/tests/printf1.sub b/tests/printf1.sub
new file mode 100644
index 0000000..e4fb54b
--- /dev/null
+++ b/tests/printf1.sub
@@ -0,0 +1,348 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+LC_ALL=C
+LC_NUMERIC=C
+
+unset vv
+
+# this should expand escape sequences in the format string, nothing else
+printf -v vv "\tone\n"
+printf "%s"  "$vv"
+
+# this should not cut off output after the \c
+printf -v vv "one\ctwo\n"
+printf "%s"  "$vv"
+
+# and unrecognized backslash escapes should have the backslash preserverd
+printf -v vv "4\.2\n"
+printf "%s"  "$vv"
+
+printf -v vv "no newline " ; printf "%s" "$vv" ; printf -v vv "now newline\n"
+printf "%s"  "$vv"
+
+# %% -> %
+printf -v vv "%%\n"
+printf "%s"  "$vv"
+
+# this was a bug caused by pre-processing the string for backslash escapes
+# before doing the `%' format processing -- all versions before bash-2.04
+printf -v vv "\045"
+printf "%s"  "$vv"
+echo
+printf -v vv "\045d\n"
+printf "%s"  "$vv"
+
+# simple character output
+printf -v vv "%c\n" ABCD
+printf "%s"  "$vv"
+
+# test simple string output
+printf -v vv "%s\n" unquoted
+printf "%s"  "$vv"
+
+# test quoted string output
+printf -v vv "%s %q\n" unquoted quoted
+printf "%s"  "$vv"
+printf -v vv "%s%10q\n" unquoted quoted
+printf "%s"  "$vv"
+
+printf -v vv "%q\n" 'this&that'
+printf "%s"  "$vv"
+
+# make sure the format string is reused to use up arguments
+printf -v vv "%d " 1 2 3 4 5
+printf "%s"  "$vv"
+echo
+
+# make sure that extra format characters get null arguments
+printf -v vv "%s %d %d %d\n" onestring
+printf "%s"  "$vv"
+
+printf -v vv "%s %d %u %4.2f\n" onestring
+printf "%s"  "$vv"
+
+printf -v vv -- "--%s %s--\n" 4.2 ''
+printf "%s"  "$vv"
+printf -v vv -- "--%s %s--\n" 4.2
+printf "%s"  "$vv"
+
+# test %b escapes
+
+# 8 is a non-octal digit, so the `81' should be output
+#printf -v vv -- "--%b--\n" '\n\081'
+#printf "%s"  "$vv"
+
+printf -v vv -- "--%b--\n" '\t\0101'
+printf "%s"  "$vv"
+printf -v vv -- "--%b--\n" '\t\101'
+printf "%s"  "$vv"
+
+# these should all display `A7'
+printf -v vv "%b\n" '\01017'
+printf "%s"  "$vv"
+printf -v vv "%b\n" '\1017'
+printf "%s"  "$vv"
+printf -v vv "%b\n" '\x417'
+printf "%s"  "$vv"
+
+printf -v vv -- "--%b--\n" '\"abcd\"'
+printf "%s"  "$vv"
+printf -v vv -- "--%b--\n" "\'abcd\'"
+printf "%s"  "$vv"
+
+printf -v vv -- "--%b--\n" 'a\\x'
+printf "%s"  "$vv"
+
+printf -v vv -- "--%b--\n" '\x'
+printf "%s"  "$vv"
+
+Z1=$(printf -- "%b\n" '\a\b\e\f\r\v')
+Z2=$'\a\b\e\f\r\v'
+
+if [ "$Z1" != "$Z2" ]; then
+	printf "%s"  "whoops: printf -v vv %b and $'' differ" >&2
+fi
+unset Z1 Z2
+
+printf -v vv -- "--%b--\n" ''
+printf "%s"  "$vv"
+printf -v vv -- "--%b--\n"
+printf "%s"  "$vv"
+
+# the stuff following the \c should be ignored, as well as the rest
+# of the format string
+printf -v vv -- "--%b--\n" '4.2\c5.4\n'
+printf "%s"  "$vv"
+echo
+
+# unrecognized escape sequences should by displayed unchanged
+printf -v vv -- "--%b--\n" '4\.2'
+printf "%s"  "$vv"
+
+# a bare \ should not be processed as an escape sequence
+printf -v vv -- "--%b--\n" '\'
+printf "%s"  "$vv"
+
+# make sure extra arguments are ignored if the format string doesn't
+# actually use them
+printf -v vv "\n" 4.4 BSD
+printf "%s"  "$vv"
+printf -v vv " " 4.4 BSD
+printf "%s"  "$vv"
+echo
+
+# make sure that a fieldwidth and precision of `*' are handled right
+printf -v vv "%10.8s\n" 4.4BSD
+printf "%s"  "$vv"
+printf -v vv "%*.*s\n" 10 8 4.4BSD
+printf "%s"  "$vv"
+
+printf -v vv "%10.8q\n" 4.4BSD
+printf "%s"  "$vv"
+printf -v vv "%*.*q\n" 10 8 4.4BSD
+printf "%s"  "$vv"
+
+printf -v vv "%6b\n" 4.4BSD
+printf "%s"  "$vv"
+printf -v vv "%*b\n" 6 4.4BSD
+printf "%s"  "$vv"
+
+# we handle this crap with homemade code in printf -v vv.def
+printf -v vv "%10b\n" 4.4BSD
+printf "%s"  "$vv"
+printf -v vv -- "--%-10b--\n" 4.4BSD
+printf "%s"  "$vv"
+printf -v vv "%4.2b\n" 4.4BSD
+printf "%s"  "$vv"
+printf -v vv "%.3b\n" 4.4BSD
+printf "%s"  "$vv"
+printf -v vv -- "--%-8b--\n" 4.4BSD
+printf "%s"  "$vv"
+
+# test numeric conversions -- these four lines should printf "%s"  identically
+printf -v vv "%d %u %i 0%o 0x%x 0x%X\n" 255 255 255 255 255 255
+printf "%s"  "$vv"
+printf -v vv "%d %u %i %#o %#x %#X\n" 255 255 255 255 255 255
+printf "%s"  "$vv"
+
+printf -v vv "%ld %lu %li 0%o 0x%x 0x%X\n" 255 255 255 255 255 255
+printf "%s"  "$vv"
+printf -v vv "%ld %lu %li %#o %#x %#X\n" 255 255 255 255 255 255
+printf "%s"  "$vv"
+
+printf -v vv "%10d\n" 42
+printf "%s"  "$vv"
+printf -v vv "%10d\n" -42
+printf "%s"  "$vv"
+
+printf -v vv "%*d\n" 10 42
+printf "%s"  "$vv"
+printf -v vv "%*d\n" 10 -42
+printf "%s"  "$vv"
+
+# test some simple floating point formats
+printf -v vv "%4.2f\n" 4.2
+printf "%s"  "$vv"
+printf -v vv "%#4.2f\n" 4.2
+printf "%s"  "$vv"
+printf -v vv "%#4.1f\n" 4.2
+printf "%s"  "$vv"
+
+printf -v vv "%*.*f\n" 4 2 4.2
+printf "%s"  "$vv"
+printf -v vv "%#*.*f\n" 4 2 4.2
+printf "%s"  "$vv"
+printf -v vv "%#*.*f\n" 4 1 4.2
+printf "%s"  "$vv"
+
+printf -v vv "%E\n" 4.2
+printf "%s"  "$vv"
+printf -v vv "%e\n" 4.2
+printf "%s"  "$vv"
+printf -v vv "%6.1E\n" 4.2
+printf "%s"  "$vv"
+printf -v vv "%6.1e\n" 4.2
+printf "%s"  "$vv"
+
+printf -v vv "%G\n" 4.2
+printf "%s"  "$vv"
+printf -v vv "%g\n" 4.2
+printf "%s"  "$vv"
+printf -v vv "%6.2G\n" 4.2
+printf "%s"  "$vv"
+printf -v vv "%6.2g\n" 4.2
+printf "%s"  "$vv"
+
+# test some of the more esoteric features of POSIX.1 printf -v vv
+printf -v vv "%d\n" "'string'"
+printf "%s"  "$vv"
+printf -v vv "%d\n" '"string"'
+printf "%s"  "$vv"
+
+printf -v vv "%#o\n" "'string'"
+printf "%s"  "$vv"
+printf -v vv "%#o\n" '"string"'
+printf "%s"  "$vv"
+
+printf -v vv "%#x\n" "'string'"
+printf "%s"  "$vv"
+printf -v vv "%#X\n" '"string"'
+printf "%s"  "$vv"
+
+printf -v vv "%6.2f\n" "'string'"
+printf "%s"  "$vv"
+printf -v vv "%6.2f\n" '"string"'
+printf "%s"  "$vv"
+
+# output from these two lines had better be the same
+printf -v vv -- "--%6.4s--\n" abcdefghijklmnopqrstuvwxyz
+printf "%s"  "$vv"
+printf -v vv -- "--%6.4b--\n" abcdefghijklmnopqrstuvwxyz
+printf "%s"  "$vv"
+
+# and these two also
+printf -v vv -- "--%12.10s--\n" abcdefghijklmnopqrstuvwxyz
+printf "%s"  "$vv"
+printf -v vv -- "--%12.10b--\n" abcdefghijklmnopqrstuvwxyz
+printf "%s"  "$vv"
+
+# tests for translating \' to ' and \\ to \
+# printf -v vv translates \' to ' in the format string...
+printf -v vv "\'abcd\'\n"
+printf "%s"  "$vv"
+
+# but not when the %b format specification is used
+printf -v vv "%b\n" \\\'abcd\\\'
+printf "%s"  "$vv"
+
+# but both translate \\ to \
+printf -v vv '\\abcd\\\n'
+printf "%s"  "$vv"
+printf -v vv "%b\n" '\\abcd\\'
+printf "%s"  "$vv"
+
+# this was reported as a bug in bash-2.03
+# these three lines should all printf "%s"  `26'
+printf -v vv "%d\n" 0x1a
+printf "%s"  "$vv"
+printf -v vv "%d\n" 032
+printf "%s"  "$vv"
+printf -v vv "%d\n" 26
+printf "%s"  "$vv"
+
+# error messages
+
+# this should be an overflow, but error messages vary between systems
+# printf -v vv "%lu\n" 4294967296
+
+# ...but we cannot use this because some systems (SunOS4, for example),
+# happily ignore overflow conditions in strtol(3)
+#printf -v vv "%ld\n" 4294967296
+
+printf -v vv "%10"
+printf -v vv "ab%Mcd\n"
+
+# this caused an infinite loop in older versions of printf -v vv
+printf -v vv "%y" 0
+
+# these should print a warning and `0', according to POSIX.2
+printf -v vv "%d\n" GNU
+printf "%s"  "$vv"
+printf -v vv "%o\n" GNU
+printf "%s"  "$vv"
+
+# failures in all bash versions through bash-2.05
+printf -v vv "%.0s" foo
+printf "%s"  "$vv"
+printf -v vv "%.*s" 0 foo
+printf "%s"  "$vv"
+
+printf -v vv '%.0b-%.0s\n' foo bar
+printf "%s"  "$vv"
+printf -v vv '(%*b)(%*s)\n' -4 foo -4 bar
+printf "%s"  "$vv"
+
+format='%'`printf '%0100384d' 0`'d\n' 
+printf -v vv $format 0
+printf "%s"  "$vv"
+
+# failures in all bash versions through bash-3.0 - undercounted characters
+unset vv
+printf -v vv "  %s %s %s  \n%n" ab cd ef vvv
+printf "%s" "$vv"
+echo $vvv
+
+# this doesn't work with printf -v vv(3) on all systems
+#printf -v vv "%'s\n" foo
+
+# test cases from an austin-group list discussion
+# prints ^G as an extension
+printf -v vv '%b\n' '\7'
+printf "%s"  "$vv"
+
+# prints ^G
+printf -v vv '%b\n' '\0007'
+printf "%s"  "$vv"
+
+# prints NUL then 7
+#printf -v vv '\0007\n'
+#printf "%s"  "$vv"
+
+# prints no more than two hex digits
+printf -v vv '\x07e\n'
+printf "%s"  "$vv"
+
+# additional backslash escapes
+printf -v vv '\"\?\n'
+printf "%s"  "$vv"
diff --git a/tests/printf2.sub b/tests/printf2.sub
new file mode 100644
index 0000000..45c48d4
--- /dev/null
+++ b/tests/printf2.sub
@@ -0,0 +1,7 @@
+unset LC_ALL LC_CTYPE
+export LANG=en_US.UTF-8
+
+case $(printf %d\\n \'À) in
+192)	exit 0;;
+*)	echo "printf2.sub: multibyte character conversion failed" >&2 ; exit 2 ;;
+esac
diff --git a/tests/printf3.sub b/tests/printf3.sub
new file mode 100644
index 0000000..4c54aa1
--- /dev/null
+++ b/tests/printf3.sub
@@ -0,0 +1,75 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+LC_ALL=C
+LANG=C
+
+SHELLSTART=$(date +%s)
+SECS=1275250155
+export TZ=EST5EDT
+
+case $SHELLSTART in
+*s*)	SHELLSTART=$EPOCHSECONDS ; DATESECS=false ;;	# take a shot
+*)	DATESECS=true ;;
+esac
+
+printf "%()T\n" $SECS
+printf "%(abde)Z\n" -1
+
+printf "%(%e-%b-%Y %T)T\n" $SECS
+
+printf -v v1 "%(%e-%b-%Y %T)T\n" $( $DATESECS && date +%s || echo $EPOCHSECONDS )
+printf -v v2 "%(%e-%b-%Y %T)T\n" -1
+
+case $v1 in
+$v2)	;;
+*)	echo "current time and -1 possible mismatch|$v1|$v2|" >&2 ;;
+esac
+unset v1 v2
+
+v1=$(date +%s)
+printf -v v2 "%(%s)T" -1
+
+case $v1 in
+$v2)	;;
+*)	echo "current time mismatch:$v1|$v2|" >&2 ;;
+esac
+unset v1 v2
+
+printf "%(%x %X)T\n" $(( $SECS - 3600 ))
+
+printf -v v1 "%(%F %r)T\n" $SHELLSTART
+printf -v v2 "%(%F %r)T\n" -2
+
+case $v1 in
+$v2)	;;
+*)	echo "shell start time and -2 possible mismatch|$v1|$v2|" >&2 ;;
+esac
+unset v1 v2
+
+printf "current time: %(%F %r)T\n" $SECS
+
+printf "epoch time: %(%F %r %z)T\n" 0
+printf "random time: %(%F %r %z)T\n"  $SECS
+
+printf "local time: %(%a %b %e %H:%M:%S %Z %Y)T\n" $SECS
+
+# test fieldwidth, justification, precision
+printf "%-40.50(%a %b %e %H:%M:%S %Z %Y)T date-style time\n" $SECS
+
+# test fieldwidth, justification, precision, embedded parens
+printf "%-40.50(%x (foo) %X)T date-style time\n" $SECS
+
+# problem introduced in bash-4.2 patch 5
+unset TZ
+printf '%(%Y-%m-%d %H:%M:%S %Z)T\n' >/dev/null
diff --git a/tests/printf4.sub b/tests/printf4.sub
new file mode 100644
index 0000000..ed4c538
--- /dev/null
+++ b/tests/printf4.sub
@@ -0,0 +1,82 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# Problems with padding, field widths, and `+' through bash-4.2
+
+printf "x%10.0fx\n" 123
+printf -v foo "x%10.0fx" 123
+echo "$foo"
+
+printf "x%10.0fx\n" 123
+printf -v foo "x%10.0fx" 123
+echo "$foo"
+
+printf "x%10.fx\n" 123
+printf -v foo "x%10.fx" 123
+echo "$foo"
+
+printf "x%10.2fx\n" 123
+printf -v foo "x%10.2fx" 123
+echo "$foo"
+
+printf "x%10.02fx\n" 123
+printf -v foo "x%10.02fx" 123
+echo "$foo"
+
+printf "x%-010.0fx\n" 123
+printf -v foo "x%-010.0fx" 123
+echo "$foo"
+
+printf "x%+010.0ex\n" 123
+printf -v foo "x%+010.0ex" 123
+echo "$foo"
+
+printf "x%+010.0fx\n" 123
+printf -v foo "x%+010.0fx" 123
+echo "$foo"
+
+printf "x%+010.0gx\n" 123
+printf -v foo "x%+010.0gx" 123
+echo "$foo"
+
+printf "x%+010.0dx\n" 123
+printf -v foo "x%+010.0dx" 123
+echo "$foo"
+
+printf "x%+010.0ldx\n" 123
+printf -v foo "x%+010.0ldx" 123
+echo "$foo"
+
+printf "x%+010.0xx\n" 123
+printf -v foo "x%+010.0xx" 123
+echo "$foo"
+
+printf "x%-+10.0fx\n" 123
+printf -v foo "x%-+10.0fx" 123
+echo "$foo"
+
+printf "x%-+10.0dx\n" 123
+printf -v foo "x%-+10.0dx" 123
+echo "$foo"
+
+printf "%f\n" -123
+printf -v foo "%f" -123
+echo "$foo"
+
+printf "x%+10.0fx\n" 123
+printf -v foo "x%+10.0fx" 123
+echo "$foo"
+
+printf "x%+10.0dx\n" 123
+printf -v foo "x%+10.0dx" 123
+echo "$foo"
diff --git a/tests/procsub.right b/tests/procsub.right
new file mode 100644
index 0000000..c6471c5
--- /dev/null
+++ b/tests/procsub.right
@@ -0,0 +1,33 @@
+test1
+foo
+test2
+test4
+8
+test5
+test6
+test7
+test8
+test8a
+test9
+hi
+bye
+l8r
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+intern
+1
+0
+0
+0
+0
+extern
+1
+0
+0
+0
+0
+123
+bar1
+ouch
+bar2
+foo
+subshell
diff --git a/tests/procsub.tests b/tests/procsub.tests
new file mode 100644
index 0000000..946d2c2
--- /dev/null
+++ b/tests/procsub.tests
@@ -0,0 +1,121 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# process substitution constructs that have caused problems in the past
+. ./test-glue-functions
+
+eval cat <(echo test1)
+eval "echo foo;cat" <(echo test2)
+
+# this doesn't work, and it never should have
+#unset f
+#f=<(echo test3); cat "$f"
+
+unset f
+eval f=<(echo test4) "; cat \$f"
+
+unset f
+
+FN=$TMPDIR/bashtest-procsub-$$
+cat >"$FN" <<EOF
+echo "test 12" | wc -c | _cut_leading_spaces
+cat "\$1"
+EOF
+
+source "$FN" <(echo test5)
+rm -f "$FN"
+unset FN
+
+cat <( echo test6 ) <( echo test7 )
+cat <( echo test8 ; sleep 2; echo test8a ) <( echo test9 )
+
+# Zev Weiss 11/7/2012
+fn() { cat | cat "$1"; }
+fn <(:) < /dev/null
+
+unset -f fn
+
+f1(){
+  cat $1
+  date >/dev/null
+}
+f2(){
+  date >/dev/null
+  cat $1
+}
+cat <(echo hi)
+f1 <(echo bye)
+f2 <(echo l8r)
+
+unset -f f1 f2
+
+# set up conditions for test
+ulimit -n 256
+
+bug()
+{
+c=$(ulimit -n)
+let c+=100
+while let c--
+do
+	while read -ru3 x
+	do
+		echo -n :
+	done 3< <(echo x)
+done
+echo
+}
+
+bug
+unset -f bug
+
+count_lines()
+{
+    wc -l < $1
+
+    case "$1" in
+    *sh-np*)	[ -e "$1" ] || { echo 0; echo 0; echo 0; echo 0; return; } ;;
+    *) ;;
+    esac
+
+    wc -l < $1
+    wc -l < $1
+    true | wc -l < $1
+    wc -l < $1
+}
+
+echo intern
+count_lines <(date) | _cut_leading_spaces
+unset -f count_lines
+
+echo extern
+FN=$TMPDIR/bashtest-$$
+cat >$FN << \EOF
+wc -l < $1
+case $1 in *sh-np*) [ -e $1 ] || { echo 0; echo 0; echo 0; echo 0; return; } ;; esac
+wc -l < $1
+wc -l < $1
+true | wc -l < $1
+wc -l < $1
+EOF
+
+${THIS_SH} -c "source $FN <(date)" | _cut_leading_spaces
+rm -f $FN
+
+moo() { ls -l "$1" >/dev/null; ls -l "$1" >/dev/null; }; moo >(true)
+moo() { ls -al "$1" >/dev/null; (true); ls -al "$1" >/dev/null; }; moo >(true)
+
+unset -f moo
+
+${THIS_SH} ./procsub1.sub
+${THIS_SH} ./procsub2.sub
diff --git a/tests/procsub1.sub b/tests/procsub1.sub
new file mode 100644
index 0000000..0e68f3b
--- /dev/null
+++ b/tests/procsub1.sub
@@ -0,0 +1,5 @@
+# make sure we can wait for the last process substitution, since it sets $!
+cat <(exit 123) >/dev/null
+
+wait "$!"
+echo $?
diff --git a/tests/procsub2.sub b/tests/procsub2.sub
new file mode 100644
index 0000000..75ad2d0
--- /dev/null
+++ b/tests/procsub2.sub
@@ -0,0 +1,36 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+# test whether or not we remove FIFOs and close pipe file descriptors too
+# aggressively
+
+ouch()
+{
+    while read foo; do echo "$foo"; done < <(echo bar1)
+    cat "$1"
+}
+
+ouch <(echo ouch )
+
+ouch2()
+{
+    { cat; } < <(echo bar2)
+    cat "$1"
+}
+
+exec 4< <(echo subshell)
+ouch2 <(echo foo )
+
+read var <&4
+echo $var
diff --git a/tests/quote.right b/tests/quote.right
new file mode 100644
index 0000000..303e685
--- /dev/null
+++ b/tests/quote.right
@@ -0,0 +1,182 @@
+Single Quote
+foo
+bar
+foo
+bar
+foo\
+bar
+Double Quote
+foo
+bar
+foo
+bar
+foobar
+Backslash Single Quote
+foo bar
+foo bar
+foobar
+Backslash Double Quote
+foo bar
+foo bar
+foobar
+Double Quote Backslash Single Quote
+foo
+bar
+foo
+bar
+foobar
+Dollar Paren Single Quote
+foo bar
+foo bar
+foo\ bar
+Dollar Paren Double Quote
+foo bar
+foo bar
+foobar
+Double Quote Dollar Paren Single Quote
+foo
+bar
+foo
+bar
+foo\
+bar
+argv[1] = <foo \\^Jbar>
+argv[1] = <foo \^Jbar>
+argv[1] = <sed> argv[2] = <-e> argv[3] = <s/[^I:]/\^J/g>
+argv[1] = <sed> argv[2] = <-e> argv[3] = <s/[^I:]//g>
+argv[1] = <foo\^Jbar>
+argv[1] = <foobar>
+argv[1] = <foo\^Jbar>
+b
+a
+b
+c
+argv[1] = <a\>
+argv[2] = <b>
+argv[1] = <$>
+argv[2] = <bab>
+argv[1] = <$foo>
+argv[2] = <bab>
+argv[1] = <$foo>
+argv[2] = <bab>
+argv[1] = <`>
+argv[2] = <ab>
+argv[1] = <\>
+argv[2] = <ab>
+${
+argv[1] = <(")>
+argv[1] = <(")>
+string \
+string \
+string \
+string \
+string \
+string \}
+'weferfds'\''dsfsdf' 
+'weferfdsdsfsdf'
+'weferfds'\''dsfsdf'
+'weferfds'\\dsfsdf'
+testdd ddtest
+testdd '\''ddtest
+testdddding
+testdddding
+test'ing
+test'ing
+test'string
+a'b'c
+foo b   c baz
+foo 'bar baz
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[2] = <>
+argv[1] = <>
+argv[2] = <>
+argv[1] = <>
+=====
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[2] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[2] = <>
+=====
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[2] = <>
+argv[1] = <>
+argv[2] = <>
+argv[1] = <>
+=====
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+argv[2] = <>
+argv[1] = <>
+argv[2] = <>
+argv[1] = <>
+argv[1] = <4>
+argv[2] = <>
+argv[1] = <ab>
+argv[2] = <>
+argv[1] = <ab>
+argv[2] = <>
+argv[1] = <ab>
+argv[2] = <>
+argv[1] = <ab>
+argv[2] = <>
+argv[1] = <ab ''>
+argv[1] = <ab >
+argv[1] = <ab ''>
+argv[1] = <ab >
+0
+1
+1
+1
+1
+1
+1
+1
+2
+2
+2
+2
+0
+1
+1
+1
+1
+1
+1
+1
+2
+2
+2
+2
+0
+0
+0
+2
+2
+4
+4
+3
+argv[1] = <^?>
+argv[1] = <^?>
+argv[1] = <^?>
+argv[1] = <^?>
+argv[1] = <^?>
+argv[1] = <^?>
diff --git a/tests/quote.tests b/tests/quote.tests
new file mode 100644
index 0000000..0a0b4af
--- /dev/null
+++ b/tests/quote.tests
@@ -0,0 +1,139 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+echo "Single Quote"
+echo 'foo
+bar'
+echo 'foo
+bar'
+echo 'foo\
+bar'
+
+echo "Double Quote"
+echo "foo
+bar"
+echo "foo
+bar"
+echo "foo\
+bar" 
+
+echo "Backslash Single Quote"
+echo `echo 'foo
+bar'`   
+echo `echo 'foo  
+bar'`   
+echo `echo 'foo\
+bar'`  
+
+echo "Backslash Double Quote"
+echo `echo "foo
+bar"`
+echo `echo "foo
+bar"`
+echo `echo "foo\
+bar"`
+
+echo "Double Quote Backslash Single Quote"
+echo "`echo 'foo
+bar'`"
+echo "`echo 'foo
+bar'`"
+echo "`echo 'foo\
+bar'`"
+
+echo "Dollar Paren Single Quote"
+echo $(echo 'foo
+bar')
+echo $(echo 'foo
+bar')
+echo $(echo 'foo\
+bar')
+
+echo "Dollar Paren Double Quote"
+echo $(echo "foo
+bar")
+echo $(echo "foo
+bar")
+echo $(echo "foo\
+bar")
+
+echo "Double Quote Dollar Paren Single Quote"
+echo "$(echo 'foo
+bar')"
+echo "$(echo 'foo
+bar')"
+echo "$(echo 'foo\
+bar')"
+
+# old-style command substitution parsing compatibility tests -- post bash-3.1
+recho 'foo \\
+bar'
+
+recho 'foo \
+bar'
+
+echo `recho sed -e 's/[	:]/\\
+/g'`
+
+echo `recho sed -e 's/[	:]/\
+/g'`
+
+echo `recho 'foo\\
+bar'`
+
+echo `recho 'foo\
+bar'`  
+
+echo $(recho 'foo\
+bar')
+
+a=`echo 'a b c' | sed 's/ /\\
+/g' | grep 'b'`
+echo $a
+a=`echo 'a b c' | sed 's/ /\\
+/g'`
+echo "$a"
+
+recho `echo 'a\' b`
+
+recho `echo '\$' bab`
+recho `echo '\$foo' bab`
+recho `echo '$foo' bab`
+
+recho `echo '\`' ab`
+
+recho `echo '\\' ab`
+
+echo `echo '${'`
+
+recho `echo "(\\")"`
+# produces no output
+: `: "\\""`
+# ultimate workaround
+recho `echo "(\")"`
+
+# various strings ending in backslashes
+
+echo 'string \'
+echo "string \\"
+
+echo string\ \\
+
+echo ${foo:-'string \'}
+echo "${foo:-string \\}"
+echo ${foo:-string \\\}}
+
+${THIS_SH} ./quote1.sub
+${THIS_SH} ./quote2.sub
+${THIS_SH} ./quote3.sub
+${THIS_SH} ./quote4.sub
diff --git a/tests/quote1.sub b/tests/quote1.sub
new file mode 100644
index 0000000..86f9786
--- /dev/null
+++ b/tests/quote1.sub
@@ -0,0 +1,62 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# inconsistency with quoted pattern substitution patterns through bash-4.2
+# fixed in a ksh93-compatible (and Posix-compatible, in general) way
+# NOT backwards compatible
+
+test="weferfds'dsfsdf"
+
+# why does this work, this list was born of frustration, I tried
+# everything I could think of.
+echo \'${test//"'"/\'\\\'\'}\'" "
+
+#but none of the following
+
+echo "'${test//"'"/}'"
+
+echo "'${test//"'"/"'\\''"}'"
+
+printf "%s\n" "'${test//"'"/\'\\'\'}'"
+
+#echo "'${test//'/}'"   # hangs waiting for '
+#echo "'${test//"'"/'\\''}'" # hangs waiting for '
+
+unset test
+test=teststrtest
+echo "${test//str/"dd dd"}"
+echo ${test//str/"dd '\''dd"}
+
+unset test
+test=teststring
+
+echo "${test//str/"dddd"}"
+
+echo ${test//str/"dddd"}
+
+echo ${test//str/"'"}
+
+echo "${test//str/"'"}"
+
+#echo "${test//str/'}"   # hangs
+
+test=test\'string
+echo "${test//"'"/"'"}"
+
+x="a'b'c"; echo "${x//\'/\'}"
+
+printf '%s\n' "foo ${IFS+"b   c"} baz"
+
+# this is where the default behavior differs from posix
+set -o posix
+echo "foo ${IFS+'bar} baz"
diff --git a/tests/quote2.sub b/tests/quote2.sub
new file mode 100644
index 0000000..1012b8f
--- /dev/null
+++ b/tests/quote2.sub
@@ -0,0 +1,55 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+x=x
+e=
+
+recho ${x:+""}
+recho ${x:+ ""}
+recho ${x:+"" }
+recho ${x:+"$e"}
+recho ${x:+ "$e"}
+recho ${x:+"$e""$e"""}
+recho ${x:+"$e""$e"""}
+recho ${x:+"$e" "$e"""}
+recho ${x:+"$e""$e" ""}
+recho ${x:+ "$e""$e"""}
+
+echo =====
+recho ${x:+''}
+recho ${x:+ ''}
+recho ${x:+'' }
+recho ${x:+'' ''}
+
+recho ${x:+$e''}
+recho ${x:+''$e}
+
+recho ${x:+''$e $e''}
+
+echo =====
+recho ${x:+"$(:)"}
+recho ${x:+ "$(:)"}
+recho ${x:+"$(:)""$(:)"""}
+recho ${x:+"$(:)""$(:)"""}
+recho ${x:+"$(:)" "$(:)"""}
+recho ${x:+"$(:)""$(:)" ""}
+recho ${x:+ "$(:)""$(:)"""}
+
+echo =====
+recho ${x:+"`:`"}
+recho ${x:+ "`:`"}
+recho ${x:+"`:`""`:`"""}
+recho ${x:+"`:`""`:`"""}
+recho ${x:+"`:`" "`:`"""}
+recho ${x:+"`:`""`:`" ""}
+recho ${x:+ "`:`""`:`"""}
diff --git a/tests/quote3.sub b/tests/quote3.sub
new file mode 100644
index 0000000..54bc5ed
--- /dev/null
+++ b/tests/quote3.sub
@@ -0,0 +1,31 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# new tests
+x=4
+sp=' '
+
+# word
+recho ${x}${sp}''
+
+# unquoted
+recho ${x+ab "$y"}
+recho ${x+ab ''}
+recho ${x+ab "$( : )"}
+recho ${x+ab "${yy}"}
+
+# quoted
+recho "${x+ab ''}"
+recho "${x+ab ""}"
+recho "${x+ab '${yy}'}"
+recho "${x+ab "${yy}"}"
diff --git a/tests/quote4.sub b/tests/quote4.sub
new file mode 100644
index 0000000..ab534c8
--- /dev/null
+++ b/tests/quote4.sub
@@ -0,0 +1,101 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+n() { echo $#; }
+
+set --
+
+n "$@"
+
+# should be 1
+n "$@"''
+n ''"$@"
+n ''"$@"''
+
+set -- ''
+
+n "$@"
+# should be 1
+n "$@"''
+n ''"$@"
+n ''"$@"''
+
+set -- '' ''
+
+n "$@"
+# should be 2
+n ''"$@"
+# should be 2
+n "$@"''
+# should be 2
+n ''"$@"''
+
+x=x
+
+set --
+
+n ${x+"$@"}
+
+# should be 1
+n ${x+"$@"''}
+n ${x+''"$@"}
+n ${x+''"$@"''}
+
+set -- ''
+
+n ${x+"$@"}
+# should be 1
+n ${x+"$@"''}
+n ${x+''"$@"}
+n ${x+''"$@"''}
+
+set -- '' ''
+
+n ${x+"$@"}
+# should be 2
+n ${x+''"$@"}
+# should be 2
+n ${x+"$@"''}
+# should be 2
+n ${x+''"$@"''}
+
+
+set --
+
+n "$@" "$@"
+n "$@""$@"
+
+n ${x+"$@" "$@"}
+
+set -- ''
+
+n ${x+"$@" "$@"}
+n "$@" "$@"
+
+set -- '' ''
+
+n ${x+"$@" "$@"}
+n "$@" "$@"
+n "$@""$@"
+
+# new tests
+unset -v x
+v=$'\177'
+
+recho ''$'\177'''
+recho $'\177'''
+recho ''$'\177'
+
+recho ''$v''
+recho ''$v
+recho $v''
diff --git a/tests/read.right b/tests/read.right
new file mode 100644
index 0000000..1144083
--- /dev/null
+++ b/tests/read.right
@@ -0,0 +1,66 @@
+a.
+-a-b-
+-a-b -
+-a  b-
+-a  b-
+-a-b\-
+-a  b\-
+-\-a  b\-
+-\ a  b\-
+-\-a  b\-
+-\ a  b\-
+argv[1] = <^A>
+argv[1] = <^A>
+argv[1] = <^?>
+argv[1] = <^?>
+argv[1] = <abcd>
+1: x[A] y[B] z[]
+1a:
+2: x[A B]
+[A B ]
+[ A B ]
+==aa==
+====
+====
+argv[1] = < foo>
+argv[1] = < foo>
+argv[1] = <foo>
+argv[1] = < foo>
+argv[1] = <foo>
+argv[1] = <foo>
+argv[1] = < foo>
+a = abcdefg
+a = xyz
+a = -xyz 123-
+a = abc
+timeout 1: ok
+
+timeout 2: ok
+
+./read2.sub: line 36: read: -3: invalid timeout specification
+1
+
+abcde
+./read3.sub: line 17: read: -1: invalid number
+abc
+ab
+abc
+#
+while read -u 3 var
+do
+echo "$var"
+done 3<$0
+argv[1] = <>
+argv[1] = <>
+argv[1] = <>
+FOO
+argv[1] = <>
+argv[1] = <3>
+argv[1] = <>
+argv[2] = <>
+argv[3] = <>
+FOO
+0 0 0
+0
+0
+1
diff --git a/tests/read.tests b/tests/read.tests
new file mode 100644
index 0000000..7384f05
--- /dev/null
+++ b/tests/read.tests
@@ -0,0 +1,111 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+echo " a " | (read x; echo "$x.")
+
+echo " a  b  " | ( read x y ; echo -"$x"-"$y"- )
+echo " a  b\ " | ( read x y ; echo -"$x"-"$y"- )
+echo " a  b  " | ( read x ; echo -"$x"- )
+echo " a  b\ " | ( read x ; echo -"$x"- )
+
+echo " a  b\ " | ( read -r x y ; echo -"$x"-"$y"- )
+echo " a  b\ " | ( read -r x ; echo -"$x"- )
+
+echo "\ a  b\ " | ( read -r x y ; echo -"$x"-"$y"- )
+echo "\ a  b\ " | ( read -r x ; echo -"$x"- )
+echo " \ a  b\ " | ( read -r x y ; echo -"$x"-"$y"- )
+echo " \ a  b\ " | ( read -r x ; echo -"$x"- )
+
+# make sure that CTLESC and CTLNUL are passed through correctly
+echo $'\001' | ( read var ; recho "$var" )
+echo $'\001' | ( read ; recho "$REPLY" )
+
+echo $'\177' | ( read var ; recho "$var" )
+echo $'\177' | ( read ; recho "$REPLY" )
+
+# make sure a backslash-quoted \\n still disappears from the input when
+# we're not reading in `raw' mode, and no stray CTLESC chars are left in
+# the input stream
+echo $'ab\\\ncd' | ( read ; recho "$REPLY" )
+
+echo "A B " > $TMPDIR/IN
+unset x y z
+read x y z < $TMPDIR/IN
+echo 1: "x[$x] y[$y] z[$z]"
+echo 1a: ${z-z not set}
+read x < $TMPDIR/IN
+echo 2: "x[$x]"
+rm $TMPDIR/IN
+
+# this is where the bash `read' behavior with respect to $REPLY differs
+# from ksh93
+echo "A B " > $TMPDIR/IN
+
+read < $TMPDIR/IN
+echo "[$REPLY]"
+
+rm $TMPDIR/IN
+
+echo " A B " > $TMPDIR/IN
+
+read < $TMPDIR/IN
+echo "[$REPLY]"
+
+rm $TMPDIR/IN
+
+# make sure that read with more variables than words sets the extra
+# variables to the empty string
+
+bvar=bvar
+cvar=cvar
+echo aa > $TMPDIR/IN
+read avar bvar cvar < $TMPDIR/IN
+echo =="$avar"==
+echo =="$bvar"==
+echo =="$cvar"==
+
+rm $TMPDIR/IN
+
+# test behavior of read with various settings of IFS
+
+echo " foo" | { IFS= read line; recho "$line"; }
+
+echo " foo" | { IFS= ; read line; recho "$line"; }
+
+echo " foo" | { unset IFS ; read line; recho "$line"; }
+
+echo " foo" | { IFS=$'\n' ; read line; recho "$line"; }
+
+echo " foo" | { IFS=$' \n' ; read line; recho "$line"; }
+
+echo " foo" | { IFS=$' \t\n' ; read line; recho "$line"; }
+
+echo " foo" | { IFS=$':' ; read line; recho "$line"; }
+
+# test read -d delim behavior
+${THIS_SH} ./read1.sub
+
+# test read -t timeout behavior
+${THIS_SH} ./read2.sub
+
+# test read -n nchars behavior
+${THIS_SH} ./read3.sub
+
+# test read -u fd behavior
+${THIS_SH} ./read4.sub
+
+# test behavior when IFS is not the default -- bug through bash-2.05b
+${THIS_SH} ./read5.sub
+
+# test behavior of read -t 0
+${THIS_SH} ./read6.sub
diff --git a/tests/read1.sub b/tests/read1.sub
new file mode 100644
index 0000000..b3b8515
--- /dev/null
+++ b/tests/read1.sub
@@ -0,0 +1,36 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+a=7
+echo 'abcdefg|xyz' | {
+	read -d '|' a 
+	echo a = "${a-unset}"
+}
+
+echo xyz 123 | {
+	read -d ' ' a
+	echo a = "${a-unset}"
+}
+
+echo xyz 123 | {
+	read -d $'\n' a
+	echo a = -"${a-unset}"-
+}
+
+a=44
+echo abcd | {
+	read -d d a
+	echo a = $a
+}
+
+exit 0
diff --git a/tests/read2.sub b/tests/read2.sub
new file mode 100644
index 0000000..41698e4
--- /dev/null
+++ b/tests/read2.sub
@@ -0,0 +1,45 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+a=4
+
+read -t 2 a < /dev/tty
+estat=$?
+if [ $estat -gt 128 ]; then
+	echo timeout 1: ok
+else
+	echo $estat
+fi
+
+echo $a
+
+sleep 5 | read -t 1 a
+estat=$?
+if [ $estat -gt 128 ]; then
+	echo timeout 2: ok
+else
+	echo $estat
+fi
+
+echo $a
+
+read -t -3 a < /dev/tty
+echo $?
+
+echo $a
+
+# the above should all time out
+echo abcde | {
+	read -t 2 a
+	echo $a
+}
diff --git a/tests/read3.sub b/tests/read3.sub
new file mode 100644
index 0000000..d413f7d
--- /dev/null
+++ b/tests/read3.sub
@@ -0,0 +1,37 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# non-interactive
+
+# error
+read -n -1
+
+# from pipe -- should work, but doesn't change tty attributes
+echo abcdefg | {
+	read -n 3 xyz
+	echo $xyz
+}
+
+# fewer chars than specified
+echo ab | {
+	read -n 3 xyz
+	echo $xyz
+}
+
+echo abc | {
+	read -N 4 -d$'\n' foo
+	echo $foo
+}
+
+read -n 1 < $0
+echo "$REPLY"
diff --git a/tests/read4.sub b/tests/read4.sub
new file mode 100644
index 0000000..80bc9fc
--- /dev/null
+++ b/tests/read4.sub
@@ -0,0 +1,4 @@
+while read -u 3 var
+do
+	echo "$var"
+done 3<$0
diff --git a/tests/read5.sub b/tests/read5.sub
new file mode 100644
index 0000000..e42a5be
--- /dev/null
+++ b/tests/read5.sub
@@ -0,0 +1,48 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+IFS=: read x y z << EOF
+:::
+EOF
+recho $x
+recho "$x"
+recho $y
+recho "$y"
+recho $z
+recho "$z"
+
+if [ -z "$x" ]; then
+	echo FOO
+else
+	echo BAR
+fi
+
+IFS=: read -a A << EOF
+:::
+EOF
+
+recho ${A[0]}
+recho "${A[0]}"
+
+recho ${#A[@]}
+
+recho "${A[@]}"
+
+if [ -z "${A[0]}" ]; then
+	echo FOO
+else
+	echo BAR
+fi
+
+echo -n ${A[0]} | cat -vet
+echo -n ${A[0]} | wc | ( IFS=$' \t\n' ;  while read line; do echo $line; done; )
diff --git a/tests/read6.sub b/tests/read6.sub
new file mode 100644
index 0000000..abfe89d
--- /dev/null
+++ b/tests/read6.sub
@@ -0,0 +1,10 @@
+# test read with a timeout of 0 -- input polling
+# sleep with fractional seconds argument is not universal
+echo abcde | { sleep 0.25 2>/dev/null ; read -t 0; }
+echo $?
+
+read -t 0 < $0
+echo $?
+
+read -t 0
+echo $?
diff --git a/tests/redir.right b/tests/redir.right
new file mode 100644
index 0000000..8db1041
--- /dev/null
+++ b/tests/redir.right
@@ -0,0 +1,163 @@
+abc
+./redir.tests: line 28: /tmp/redir-test: cannot overwrite existing file
+abc
+def
+def
+./redir.tests: line 44: $z: ambiguous redirect
+Point 1
+Point 2
+to a
+to b
+Point 3
+to a
+to a
+to b
+to b
+Point 4
+to c
+Point 5
+this is redir1.sub
+this is redir2.sub
+read line1 "ab"
+read line2 "root"
+read line3 "cd"
+read line4 "daemon"
+from stdin: aa
+to stdout
+./redir4.sub: line 45: $fd: ambiguous redirect
+./redir4.sub: line 46: $fd: ambiguous redirect
+err-and-out:
+to stdout
+to stderr
+err-and-out:
+to stdout
+to stderr
+0 -- 3 0
+0 -- 4 0
+ab
+cd
+ef
+gh
+ij
+kl
+0
+ab
+cd
+cd
+./redir.tests: line 170: redir1.*: No such file or directory
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# tests of ksh93-like dup-and-close redirection operators
+exec 9<$0
+
+f()
+{
+exec 5<$0
+
+exec 0<&5-
+
+while read line; do
+echo "$line"
+done
+}
+
+f
+
+typeset -f f
+
+# make sure it was closed
+read -u 5 foo 2>&1 | grep -q 'invalid file descriptor'
+echo after read
+
+exec 5<&0
+
+exec <&-
+
+read abcde 2>&1 | grep -q 'read error'
+
+exec 0<&9-
+read line
+echo $line
+f () 
+{ 
+    exec 5< $0;
+    exec 0<&5-;
+    while read line; do
+        echo "$line";
+    done
+}
+after read
+# This program is free software: you can redistribute it and/or modify
+/
+/
+/
+0
+0
+0
+before block
+after block
+c1 is 1
+c2 is 2
+c3 is 3
+c4 is 4
+fd 10
+fd 8
+fd 10
+fd 8
+1
+2
+3
+4
+1
+2
+3
+4
+cat /tmp/foo
+whatsis
+hey
+to stdout
+to stderr
+
+to stdout
+to stderr
+
+to stderr
+to stdout
+
+to stderr
+hey
+to stdout
+logfunc is a function
+logfunc () 
+{ 
+    echo "$@" &>> $TMPDIR/log
+}
+foo
+bix is a function
+bix () 
+{ 
+    echo foo 2>&1 | cat
+}
+foo
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+1
+7
+after: 42
+./redir11.sub: line 53: $(ss= declare -i ss): ambiguous redirect
+after: 42
+a+=3
+foo
+foo
+./redir11.sub: line 75: 42: No such file or directory
+42
diff --git a/tests/redir.tests b/tests/redir.tests
new file mode 100644
index 0000000..63bd4d3
--- /dev/null
+++ b/tests/redir.tests
@@ -0,0 +1,209 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+: ${TMPDIR:=/tmp}
+
+export LC_ALL=C
+export LANG=C
+
+# catch-all for remaining untested redirection stuff
+set +o posix
+
+echo abc > /tmp/redir-test
+cat /tmp/redir-test
+
+set -o noclobber
+
+#this should be an error
+echo def > /tmp/redir-test
+cat /tmp/redir-test
+
+# but this should succeed
+echo def > /tmp/redir-test-2
+cat /tmp/redir-test-2
+
+# and so should this
+echo def >| /tmp/redir-test
+cat /tmp/redir-test
+
+set +o noclobber
+rm /tmp/redir-test /tmp/redir-test-2
+
+# this should be an error
+z="a b"
+cat < $z
+
+echo "Point 1"
+
+exec 3</etc/passwd
+exec 4>$TMPDIR/bash-a
+exec 5>$TMPDIR/bash-b
+echo "Point 2"
+
+echo to a 1>&4
+echo to b 1>&5
+cat $TMPDIR/bash-a
+cat $TMPDIR/bash-b
+exec 11</dev/null
+echo "Point 3"
+
+echo to a 1>&4
+echo to b 1>&5
+cat $TMPDIR/bash-a
+cat $TMPDIR/bash-b
+
+exec 11<&-
+echo "Point 4"
+
+exec 6<>$TMPDIR/bash-c
+echo to c 1>&6
+cat $TMPDIR/bash-c
+echo "Point 5"
+
+# clean up before running scripts
+exec 4>&- 5>&- 6<&-
+
+rm -f $TMPDIR/bash-a $TMPDIR/bash-b $TMPDIR/bash-c
+
+#
+# Test the effect of input buffering on the shell's input
+#
+${THIS_SH} < redir1.sub
+
+# more open, close, duplicate file descriptors
+${THIS_SH} ./redir3.sub < ./redir3.in1
+
+# still more redirections
+${THIS_SH} ./redir4.sub < redir4.in1
+
+# various forms of null redirection
+testf()
+{
+	if [ -f "$1" ]; then
+		rm -f "$1"
+	else
+		echo oops -- $1 not found
+	fi
+}
+
+> $TMPDIR/null-redir-a
+testf $TMPDIR/null-redir-a
+
+$EXIT > $TMPDIR/null-redir-b
+testf $TMPDIR/null-redir-b
+
+( > $TMPDIR/null-redir-c )
+testf $TMPDIR/null-redir-c
+
+$EXIT > $TMPDIR/null-redir-d &
+wait
+testf $TMPDIR/null-redir-d
+
+exit 3 | $EXIT > $TMPDIR/null-redir-e
+echo $? -- ${PIPESTATUS[@]}
+testf $TMPDIR/null-redir-e
+
+exit 4 | > $TMPDIR/null-redir-f
+echo $? -- ${PIPESTATUS[@]}
+testf $TMPDIR/null-redir-f
+
+> $TMPDIR/null-redir-g &
+wait
+testf $TMPDIR/null-redir-g
+
+exec >$TMPDIR/null-redir-h &
+wait
+testf $TMPDIR/null-redir-h
+
+# make sure async commands don't get /dev/null as stdin when an explicit
+# input redirection is supplied
+for x in 1 2 3; do
+	{ read line ; echo $line ; } &
+	wait
+	{ read line ; echo $line ; } &
+	wait
+done << EOF
+ab
+cd
+ef
+gh
+ij
+kl
+EOF
+
+# make sure async commands get /dev/null as stdin in the absence of any
+# input redirection
+/bin/cat &
+wait
+echo $?
+
+# make sure that loops work OK with here documents and are not run in
+# subshells
+while read line; do
+	echo $line
+	l2=$line
+done << EOF
+ab
+cd
+EOF
+echo $l2
+
+# These should not echo anything -- bug in versions before 2.04
+( ( echo hello 1>&3 ) 3>&1 ) >/dev/null 2>&1
+
+( ( echo hello 1>&3 ) 3>&1 ) >/dev/null 2>&1 | cat
+
+# in posix mode, non-interactive shells are not allowed to perform
+# filename expansion on input redirections, even if they expand to
+# a single filename
+set -o posix
+cat < redir1.*
+
+# test ksh93 dup-and-close (move fd) redirections
+${THIS_SH} ./redir5.sub
+
+# test behavior after a write error with a builtin command
+${THIS_SH} ./redir6.sub
+
+# problem with redirections using fds bash uses internally
+: ${TMPDIR:=$TMPDIR}
+
+trap 'rm -f $TMPDIR/bash-redir-$$' 0 1 2 3 6 15
+
+echo before block
+{
+	echo before redir
+	exec 10>&1
+	echo after redir
+} > $TMPDIR/bash-redir-$$
+
+echo after block
+
+${THIS_SH} ./redir7.sub
+
+${THIS_SH} ./redir8.sub
+
+exec 9>&2
+command exec 2>$TMPDIR/foo-$$
+echo whatsis >&2
+echo cat /tmp/foo
+cat $TMPDIR/foo-$$
+rm -f $TMPDIR/foo-$$
+exec 2>&9
+exec 9>&-
+
+${THIS_SH} ./redir9.sub
+
+${THIS_SH} ./redir10.sub
+
+${THIS_SH} ./redir11.sub
diff --git a/tests/redir1.sub b/tests/redir1.sub
new file mode 100644
index 0000000..f1082e9
--- /dev/null
+++ b/tests/redir1.sub
@@ -0,0 +1,8 @@
+#
+# Test the effect of input buffering on the shell's input
+#
+echo this is redir1.sub
+
+exec 0< redir2.sub
+
+echo BUG: after exec in redir1.sub
diff --git a/tests/redir10.sub b/tests/redir10.sub
new file mode 100644
index 0000000..7b1d682
--- /dev/null
+++ b/tests/redir10.sub
@@ -0,0 +1,37 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+#
+# Out of file descriptors, because it forgets to close redirection.  Only
+# happens in a shell function.  Problem through bash-4.2.
+
+ulimit -n 128
+
+bug()
+{
+c=`ulimit -n`
+let c+=100
+while let c--
+do
+	while read -ru3 x
+	do
+		echo -n :
+	done 3< <(echo x)
+
+done
+}
+
+bug
+echo
+
+exit 0
diff --git a/tests/redir11.sub b/tests/redir11.sub
new file mode 100644
index 0000000..d417cdb
--- /dev/null
+++ b/tests/redir11.sub
@@ -0,0 +1,76 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# make sure redirections do not have access to the temporary environment, even
+# in subshells and command substitutions
+
+a=1
+a=4 b=7 ss=4 echo $a
+
+# use grep to avoid differences due to different system error messages
+a=42
+a=2 echo foo 2>&1 >&$a | { grep -q '\$a: Bad file' || echo 'redir11 bad 1'; }
+a=2 echo foo 2>&1 >&$(echo $a) | { grep -q 'Bad file' || echo 'redir11 bad 2'; }
+
+foo()
+{
+	local -i a
+	local v=0 x=1
+	a+=3
+	echo $a
+}
+
+a=4 b=7 ss=4 declare -i ss
+a=4 b=7 foo
+echo after: $a
+
+unset a
+a=4 echo foo 2>&1 >&$(foo) | { grep -q 'Bad file' || echo 'redir11 bad 3'; }
+a=1 echo foo 2>&1 >&$(foo) | { grep -q 'Bad file' || echo 'redir11 bad 4'; }
+a=1 echo foo 2>&1 >&$(a=4 foo) | { grep -q 'Bad file' || echo 'redir11 bad 5'; }
+echo foo 2>&1 >&$(a=4 foo) | { grep -q 'Bad file' || echo 'redir11 bad 6'; }
+
+a=42
+a=2 echo foo 2>&1 >&$a | { grep -q 'Bad file' || echo 'redir11 bad 7'; }
+a=2 echo foo 2>&1 >&$(echo $a) | { grep -q 'Bad file' || echo 'redir11 bad 8'; }
+
+unset -f foo
+foo()
+{
+	local -i a
+	local v=0 x=1
+	a+=3
+	echo $a >&$(ss= declare -i ss)
+}
+
+a=4 b=7 foo
+echo after: $a
+
+unset a
+typeset -i a
+a=4 eval echo $(echo a+=3)
+a=2
+a=9 echo foo >&$(echo $a)
+a=2
+a=9 eval echo foo >&$(echo $a)
+a=2
+a=9 eval echo foo '2>&1 >&$(echo $a)' | { grep -q 'Bad file' || echo 'redir11 bad 9'; }
+
+# double expansion of filenames when used in redirection error messages
+# present in bash versions back to at least bash-1.13
+# this is executed in the tests subdirectory of the source directory, so there
+# definitely should not be a file named `42'
+
+unset foo
+: <$((foo+=42))
+echo $foo
diff --git a/tests/redir2.sub b/tests/redir2.sub
new file mode 100644
index 0000000..0820f70
--- /dev/null
+++ b/tests/redir2.sub
@@ -0,0 +1 @@
+echo this is redir2.sub
diff --git a/tests/redir3.in1 b/tests/redir3.in1
new file mode 100644
index 0000000..dbd1fc3
--- /dev/null
+++ b/tests/redir3.in1
@@ -0,0 +1,2 @@
+ab
+cd
diff --git a/tests/redir3.in2 b/tests/redir3.in2
new file mode 100644
index 0000000..5a1c32b
--- /dev/null
+++ b/tests/redir3.in2
@@ -0,0 +1,2 @@
+root
+daemon
diff --git a/tests/redir3.sub b/tests/redir3.sub
new file mode 100644
index 0000000..b9fd0fd
--- /dev/null
+++ b/tests/redir3.sub
@@ -0,0 +1,39 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+read line1
+
+echo read line1 \"$line1\"
+
+exec 4<./redir3.in2
+
+exec 5<&0
+exec 0<&4
+
+read line2
+
+echo read line2 \"$line2\"
+
+exec 0<&5
+
+read line3
+
+echo read line3 \"$line3\"
+
+exec 0<&4
+
+read line4
+
+echo read line4 \"$line4\"
+
+exec 4<&-
diff --git a/tests/redir4.in1 b/tests/redir4.in1
new file mode 100644
index 0000000..e61ef7b
--- /dev/null
+++ b/tests/redir4.in1
@@ -0,0 +1 @@
+aa
diff --git a/tests/redir4.sub b/tests/redir4.sub
new file mode 100644
index 0000000..a482985
--- /dev/null
+++ b/tests/redir4.sub
@@ -0,0 +1,69 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+minus=-
+
+# standard input
+fd=0
+
+exec 3<&$fd
+
+read line <&3
+echo from stdin: $line
+
+# close fd 3
+exec 3<&${minus}
+
+# should give `bad fd', but exact error messages vary
+# read line <&3
+
+# standard output
+fd=1
+
+exec 4>&$fd
+
+echo to stdout >&4
+
+exec 4>&$minus
+
+# should give `bad fd', but exact error messages vary
+# echo to stdout >&4
+
+unset fd
+
+# these are ambiguous redirects
+exec 3<&$fd
+exec 4>&$fd
+
+exec 3>&1 4>&2
+
+exec >&${TMPDIR}/err-and-out
+echo to stdout
+echo to stderr >&2
+
+exec 1>&3 2>&4
+echo err-and-out:
+cat ${TMPDIR}/err-and-out
+
+rm ${TMPDIR}/err-and-out
+
+fd=${TMPDIR}/err-and-out
+exec >&$fd
+echo to stdout
+echo to stderr >&2
+
+exec 1>&3 2>&4
+echo err-and-out:
+cat ${TMPDIR}/err-and-out
+
+rm ${TMPDIR}/err-and-out
diff --git a/tests/redir5.sub b/tests/redir5.sub
new file mode 100644
index 0000000..fa0f0c0
--- /dev/null
+++ b/tests/redir5.sub
@@ -0,0 +1,44 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# tests of ksh93-like dup-and-close redirection operators
+exec 9<$0
+
+f()
+{
+exec 5<$0
+
+exec 0<&5-
+
+while read line; do
+	echo "$line"
+done
+}
+
+f
+
+typeset -f f
+
+# make sure it was closed
+read -u 5 foo 2>&1 | grep -q 'invalid file descriptor' 
+echo after read
+
+exec 5<&0
+
+exec <&-
+
+read abcde 2>&1 | grep -q 'read error'
+
+exec 0<&9-
+read line
+echo $line
diff --git a/tests/redir6.sub b/tests/redir6.sub
new file mode 100644
index 0000000..c735e52
--- /dev/null
+++ b/tests/redir6.sub
@@ -0,0 +1,10 @@
+cd /
+pwd
+help >&-
+pwd
+pwd
+echo $?
+echo $?
+echo $?
+
+cd $OLDPWD
diff --git a/tests/redir7.sub b/tests/redir7.sub
new file mode 100644
index 0000000..65ca473
--- /dev/null
+++ b/tests/redir7.sub
@@ -0,0 +1,82 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# weird redirections that caused trouble and were fixed in post-3.0 bash
+stuff()
+{
+	c=1
+	( sleep 5 < /dev/null >/dev/null 2>&1 & ) &
+}
+
+exec 3>&1
+eval `
+exec 4>&1 >&3 3>&-
+{
+	stuff 4>&-
+	echo "c=$c" >&4
+}`
+echo c1 is $c
+
+unset -f stuff
+
+stuff()
+{
+	c=2
+	( sleep 5 < /dev/null >/dev/null 2>&1 & )
+}
+
+exec 3>&1
+eval `
+exec 4>&1 >&3 3>&-
+{
+	stuff 4>&-
+	echo "c=$c" >&4
+}`
+echo c2 is $c
+
+unset -f stuff
+
+stuff()
+{
+	c=3
+	{ sleep 5 < /dev/null >/dev/null 2>&1 & } &
+}
+
+exec 3>&1
+eval `
+exec 4>&1 >&3 3>&-
+{
+	stuff 4>&-
+	echo "c=$c" >&4
+}`
+echo c3 is $c
+
+unset -f stuff
+
+stuff()
+{
+	c=4
+	{ sleep 5 < /dev/null >/dev/null 2>&1 & }
+}
+
+exec 3>&1
+eval `
+exec 4>&1 >&3 3>&-
+{
+	stuff 4>&-
+	echo "c=$c" >&4
+}`
+echo c4 is $c
+
+# fixed in bash-3.1
+echo 'exec <&3' | ${THIS_SH} 3<&0
diff --git a/tests/redir8.sub b/tests/redir8.sub
new file mode 100644
index 0000000..d2d700c
--- /dev/null
+++ b/tests/redir8.sub
@@ -0,0 +1,74 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+cd ${TMPDIR:=/var/tmp}
+rm -f u
+
+${THIS_SH} -c 'exec 10>&1; echo fd 10 >&10' 10>u
+cat u
+rm -f u
+
+${THIS_SH} -c 'exec 8>&1; echo fd 8 >&8' 8>u
+cat u
+rm -f u
+
+exec 10>u
+exec 10>&1; echo 'fd 10' >&10
+cat u
+rm -f u
+exec 10>&-
+
+exec 8>u
+exec 8>&1; echo 'fd 8' >&8
+cat u
+rm -f u
+exec 8>&-
+
+rm -f infile
+cat > infile <<EOF
+1
+2
+3
+4
+EOF
+
+exec 7<&0
+exec 10<infile
+exec 0<&10; cat <&10
+exec 0<&7
+exec 7<&-
+
+exec 7<&0
+exec 8<infile
+exec 0<&8 ; cat <&8
+exec 0<&7
+exec 7<&-
+
+exec 7<&0
+exec 0</dev/null
+exec 10<infile
+exec 10<&0; cat <&10
+exec 0<&7
+exec 7<&-
+
+exec 7<&0
+exec 0</dev/null
+exec 8<infile
+exec 8<&0; cat <&8
+exec 0<&7
+exec 7<&-
+
+rm -f infile
+
+cd $OLDPWD
+exit 0
diff --git a/tests/redir9.sub b/tests/redir9.sub
new file mode 100644
index 0000000..9050a94
--- /dev/null
+++ b/tests/redir9.sub
@@ -0,0 +1,63 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+: ${TMPDIR:=/tmp}
+
+func()
+{
+	echo "to stdout"
+	echo "to stderr" >&2
+}
+
+TMPFN=$TMPDIR/foo-$$
+
+rm -f $TMPFN
+
+echo hey > $TMPFN
+func &>> $TMPFN
+
+cat $TMPFN
+
+echo
+func &> $TMPFN
+
+cat $TMPFN
+
+echo
+func >$TMPFN
+cat $TMPFN
+
+echo
+echo hey > $TMPFN
+func >> $TMPFN
+cat $TMPFN
+
+rm -f $TMPFN
+
+logfunc()
+{
+	echo "$@" &>> $TMPDIR/log
+}
+
+type logfunc
+
+echo foo 2>&1
+
+bix()
+{
+echo foo |& cat
+}
+
+type bix
+
+bix
diff --git a/tests/rhs-exp.right b/tests/rhs-exp.right
new file mode 100644
index 0000000..4ce6743
--- /dev/null
+++ b/tests/rhs-exp.right
@@ -0,0 +1,105 @@
+argv[1] = <TDEFAULTS = -DSELECT_VECS='&m68kcoff_vec'>
+argv[1] = <TDEFAULTS = -DSELECT_VECS=\'&m68kcoff_vec\'>
+argv[1] = <TDEFAULTS = -DSELECT_VECS=&m68kcoff_vec>
+argv[1] = <TDEFAULTS = -DSELECT_VECS="&m68kcoff_vec">
+argv[1] = <TDEFAULTS = -DSELECT_VECS=\&m68kcoff_vec\>
+argv[1] = <TDEFAULTS = -DSELECT_VECS=&m68kcoff_vec>
+argv[1] = <TDEFAULTS = -DSELECT_VECS=$selvecs>
+argv[1] = <TDEFAULTS = -DSELECT_VECS=$selvecs>
+argv[1] = <TDEFAULTS = -DSELECT_VECS='&m68kcoff_vec'>
+argv[1] = <TDEFAULTS = -DSELECT_VECS=\&m68kcoff_vec>
+argv[1] = <TDEFAULTS = -DSELECT_VECS='&m68kcoff_vec'>
+argv[1] = <TDEFAULTS>
+argv[2] = <=>
+argv[3] = <-DSELECT_VECS=$selvecs>
+argv[1] = <TDEFAULTS>
+argv[2] = <=>
+argv[3] = <-DSELECT_VECS='&m68kcoff_vec'>
+argv[1] = <TDEFAULTS>
+argv[2] = <=>
+argv[3] = <-DSELECT_VECS=&m68kcoff_vec>
+argv[1] = <TDEFAULTS>
+argv[2] = <=>
+argv[3] = <-DSELECT_VECS="&m68kcoff_vec">
+argv[1] = <TDEFAULTS>
+argv[2] = <=>
+argv[3] = <-DSELECT_VECS=\&m68kcoff_vec\>
+argv[1] = <TDEFAULTS>
+argv[2] = <=>
+argv[3] = <-DSELECT_VECS=&m68kcoff_vec>
+argv[1] = <TDEFAULTS>
+argv[2] = <=>
+argv[3] = <-DSELECT_VECS=$selvecs>
+argv[1] = <TDEFAULTS>
+argv[2] = <=>
+argv[3] = <-DSELECT_VECS=$selvecs>
+argv[1] = <TDEFAULTS>
+argv[2] = <=>
+argv[3] = <-DSELECT_VECS=$selvecs>
+argv[1] = <TDEFAULTS>
+argv[2] = <=>
+argv[3] = <-DSELECT_VECS=\&m68kcoff_vec>
+argv[1] = <TDEFAULTS>
+argv[2] = <=>
+argv[3] = <-DSELECT_VECS=\'&m68kcoff_vec\'>
+argv[1] = <TDEFAULTS = -DSELECT_VECS=p>
+argv[1] = <TDEFAULTS = -DSELECT_VECS=\p>
+argv[1] = <TDEFAULTS = -DSELECT_VECS=\>
+argv[1] = <TDEFAULTS = -DSELECT_VECS=\>
+argv[1] = <TDEFAULTS = -DSELECT_VECS=\'>
+argv[1] = <TDEFAULTS = -DSELECT_VECS='>
+argv[1] = <TDEFAULTS>
+argv[2] = <=>
+argv[3] = <-DSELECT_VECS=\p>
+argv[1] = <TDEFAULTS>
+argv[2] = <=>
+argv[3] = <-DSELECT_VECS=p>
+argv[1] = <TDEFAULTS>
+argv[2] = <=>
+argv[3] = <-DSELECT_VECS=\>
+argv[1] = <TDEFAULTS>
+argv[2] = <=>
+argv[3] = <-DSELECT_VECS=\>
+argv[1] = <TDEFAULTS>
+argv[2] = <=>
+argv[3] = <-DSELECT_VECS='>
+argv[1] = <TDEFAULTS>
+argv[2] = <=>
+argv[3] = <-DSELECT_VECS=\'>
+a*b
+ab
+a?b
+ab
+a/b
+ab
+argv[1] = <bc>
+argv[1] = <bc>
+argv[1] = <ab>
+argv[1] = <ab>
+argv[1] = <bc>
+argv[1] = <bc>
+argv[1] = <c>
+argv[1] = <ab>
+argv[1] = <ab>
+argv[1] = <aacc>
+argv[1] = <aacc>
+argv[1] = <aabbcc>
+argv[1] = <aabbcc>
+argv[1] = <Oenophile>
+argv[1] = <OEnOphIlE>
+argv[1] = <>
+argv[1] = <abc>
+argv[1] = <''>
+argv[1] = <>
+good 1
+good 2
+good 3
+good 4
+good 5
+ok 1
+ok 2
+ok 3
+ok 4
+ok 5
+ok 6
+ok 7
diff --git a/tests/rhs-exp.tests b/tests/rhs-exp.tests
new file mode 100644
index 0000000..6abdd2a
--- /dev/null
+++ b/tests/rhs-exp.tests
@@ -0,0 +1,64 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+selvecs='&m68kcoff_vec'
+recho "TDEFAULTS = ${selvecs:+-DSELECT_VECS='$selvecs'}"
+recho "TDEFAULTS = ${selvecs:+-DSELECT_VECS=\'$selvecs\'}"
+recho "TDEFAULTS = ${selvecs:+-DSELECT_VECS="$selvecs"}"
+recho "TDEFAULTS = ${selvecs:+-DSELECT_VECS=\"$selvecs\"}"
+recho "TDEFAULTS = ${selvecs:+-DSELECT_VECS=\\$selvecs\\}"
+recho "TDEFAULTS = ${selvecs:+-DSELECT_VECS=$selvecs}"
+recho "TDEFAULTS = ${selvecs:+-DSELECT_VECS=\$selvecs}"
+recho "TDEFAULTS = ${selvecs:+-DSELECT_VECS="\$selvecs"}"
+recho "TDEFAULTS = ${selvecs:+-DSELECT_VECS='$selvecs'"$null"}"
+recho "TDEFAULTS = ${selvecs:+-DSELECT_VECS="\\$selvecs"}"
+recho "TDEFAULTS = ${selvecs:+-DSELECT_VECS="\'$selvecs\'"}"
+
+recho TDEFAULTS = ${selvecs:+-DSELECT_VECS='$selvecs'}
+recho TDEFAULTS = ${selvecs:+-DSELECT_VECS=\'$selvecs\'}
+recho TDEFAULTS = ${selvecs:+-DSELECT_VECS="$selvecs"}
+recho TDEFAULTS = ${selvecs:+-DSELECT_VECS=\"$selvecs\"}
+recho TDEFAULTS = ${selvecs:+-DSELECT_VECS=\\$selvecs\\}
+recho TDEFAULTS = ${selvecs:+-DSELECT_VECS=$selvecs}
+recho TDEFAULTS = ${selvecs:+-DSELECT_VECS=\$selvecs}
+recho TDEFAULTS = ${selvecs:+-DSELECT_VECS="\$selvecs"}
+recho TDEFAULTS = ${selvecs:+-DSELECT_VECS='$selvecs'"$null"}
+recho TDEFAULTS = ${selvecs:+-DSELECT_VECS="\\$selvecs"}
+recho TDEFAULTS = ${selvecs:+-DSELECT_VECS="\'$selvecs\'"}
+
+recho "TDEFAULTS = ${selvecs:+-DSELECT_VECS="\p"}"
+recho "TDEFAULTS = ${selvecs:+-DSELECT_VECS=\p}"
+recho "TDEFAULTS = ${selvecs:+-DSELECT_VECS="\\"}"
+recho "TDEFAULTS = ${selvecs:+-DSELECT_VECS=\\}"
+recho "TDEFAULTS = ${selvecs:+-DSELECT_VECS=\'}"
+recho "TDEFAULTS = ${selvecs:+-DSELECT_VECS="\'"}"
+
+recho TDEFAULTS = ${selvecs:+-DSELECT_VECS="\p"}
+recho TDEFAULTS = ${selvecs:+-DSELECT_VECS=\p}
+recho TDEFAULTS = ${selvecs:+-DSELECT_VECS="\\"}
+recho TDEFAULTS = ${selvecs:+-DSELECT_VECS=\\}
+recho TDEFAULTS = ${selvecs:+-DSELECT_VECS=\'}
+recho TDEFAULTS = ${selvecs:+-DSELECT_VECS="\'"}
+
+# more tests for bash-3.0 behavior
+
+var="a*b" ; echo "${var//\\*/}"
+var="a*b" ; echo "${var//\*/}"
+
+var="a?b" ; echo "${var//\\?/}"
+var="a?b" ; echo "${var//\?/}"
+
+var="a/b" ; echo "${var//\\//}"
+var="a/b" ; echo "${var//\//}"
+
+${THIS_SH} ./rhs-exp1.sub
diff --git a/tests/rhs-exp1.sub b/tests/rhs-exp1.sub
new file mode 100644
index 0000000..b194bf0
--- /dev/null
+++ b/tests/rhs-exp1.sub
@@ -0,0 +1,116 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# fixes for bugs in bash-4.2 regarding empty strings in expand_string_for_rhs
+
+f=abc
+recho ${f##""a}
+recho ${f##"$v"a}
+
+recho ${f%%""c}
+recho ${f%%"$v"c}
+
+recho ${f//""a}
+recho ${f//"$v"a}
+
+recho ${f/""a""b/}
+recho ${f/""c/}
+recho ${f/"$v"c/}
+
+unset foo empty
+foo=aabbcc
+
+recho ${foo/bb/}
+recho ${foo/bb/$empty}
+
+recho ${foo/}
+recho ${empty/}
+
+recho ${foo/ }
+recho ${empty/ }
+unset foo empty
+
+S2=oenophile
+
+recho ${S2^"$v"[aeiou]}
+recho ${S2^^"$v"[aeiou]}
+
+recho ${foo:-""}
+recho ${foo:-""abc}
+
+recho "${foo:-''}"
+recho "${foo:-}"
+
+if [[ $var == "" ]]; then
+	echo good 1
+fi
+
+if [[ "$var"X == ""X ]]; then
+	echo good 2
+fi
+
+if [ "$var"X == ""X"" ]; then
+	echo good 3
+fi
+
+if [ X"" == X ]; then
+	echo good 4
+fi
+
+if [[ X"" == X ]]; then
+	echo good 5
+fi
+
+case x"" in
+  x) echo 'ok 1'
+     ;;
+  x??) echo 'this would be really odd'
+     ;;
+  x?) echo 'does this prove anything?'
+      echo x""x
+     ;;
+  *) echo 'no match'
+     ;;
+esac
+
+if [[ x"" == x ]]; then
+	echo ok 2
+fi
+
+if [[ x"
" == x"
" ]]; then
+	echo ok 3
+else
+	echo bad 3
+fi
+
+case x"
" in
+x"
")	echo ok 4 ;;
+*)	echo bad 4;;
+esac
+
+if [[ x"" == x"" ]]; then
+	echo ok 5
+else
+	echo bad 5
+fi
+
+case x"" in
+"x")	echo ok 6 ;;
+*)	echo bad 6;;
+esac
+
+case x"" in
+"x")	echo CTLNUL 7 ;;
+x)	echo ok 7 ;;
+*)	echo bad 7 ;;
+esac
diff --git a/tests/rsh.right b/tests/rsh.right
new file mode 100644
index 0000000..a91974a
--- /dev/null
+++ b/tests/rsh.right
@@ -0,0 +1,19 @@
+./rsh1.sub: line 22: /bin/sh: restricted
+./rsh1.sub: line 24: sh: not found
+./rsh1.sub: line 25: a: command not found
+./rsh2.sub: line 23: hash: /bin/sh: restricted
+./rsh2.sub: line 25: hash: sh: not found
+./rsh2.sub: line 26: a: command not found
+./rsh.tests: line 25: cd: restricted
+./rsh.tests: line 26: PATH: readonly variable
+./rsh.tests: line 27: SHELL: readonly variable
+./rsh.tests: line 28: /bin/sh: restricted: cannot specify `/' in command names
+./rsh.tests: line 30: .: ./source.sub3: restricted
+./rsh.tests: line 33: /tmp/restricted: restricted: cannot redirect output
+./rsh.tests: line 37: /tmp/restricted: restricted: cannot redirect output
+./rsh.tests: line 42: command: -p: restricted
+./rsh.tests: line 44: set: +r: invalid option
+set: usage: set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]
+./rsh.tests: line 45: set: restricted: invalid option name
+./rsh.tests: line 47: exec: restricted
+./rsh.tests: after exec
diff --git a/tests/rsh.tests b/tests/rsh.tests
new file mode 100644
index 0000000..0d06fa1
--- /dev/null
+++ b/tests/rsh.tests
@@ -0,0 +1,49 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# test restricted shell mode -- these should all be errors
+#
+# things not tested for:
+#	adding builtins dynamically with enable -f
+#	importing function definitions from environment
+
+${THIS_SH} ./rsh1.sub
+${THIS_SH} ./rsh2.sub
+
+set -r
+
+cd /
+PATH=$PATH:/usr/local/bin
+SHELL=/bin/sh
+/bin/sh -c 'echo /bin/sh executed'
+
+. ./source.sub3
+
+rm -f /tmp/restricted
+echo abc > /tmp/restricted
+if [ -f /tmp/restricted ]; then
+	echo oops 1 -- output
+fi
+echo abc >> /tmp/restricted
+if [ -f /tmp/restricted ]; then
+	echo oops 2 -- append
+fi
+
+command -p date
+
+set +r
+set +o restricted
+
+exec /bin/date
+
+echo $0: after exec
diff --git a/tests/rsh1.sub b/tests/rsh1.sub
new file mode 100644
index 0000000..1539d74
--- /dev/null
+++ b/tests/rsh1.sub
@@ -0,0 +1,29 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+cd ${TMPDIR:-/tmp}
+cp /bin/sh .
+
+PATH=/rbin:/usr/local/rbin
+hash -p /bin/rm rm
+
+set -r
+
+BASH_CMDS[x]=/bin/sh
+
+BASH_CMDS[a]="sh"
+a -c 'echo hello'
+
+rm -f sh a
+
+exit 0
diff --git a/tests/rsh2.sub b/tests/rsh2.sub
new file mode 100644
index 0000000..7259dfb
--- /dev/null
+++ b/tests/rsh2.sub
@@ -0,0 +1,30 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+cd ${TMPDIR:-/tmp}
+cp /bin/sh .
+ln sh a
+
+PATH=/rbin:/usr/local/rbin
+hash -p /bin/rm rm
+
+set -r
+
+hash -p /bin/sh sh
+
+hash -p sh a
+a -c 'echo hello'
+
+rm -f sh a
+
+exit 0
diff --git a/tests/run-alias b/tests/run-alias
new file mode 100644
index 0000000..3b4f4dc
--- /dev/null
+++ b/tests/run-alias
@@ -0,0 +1,2 @@
+${THIS_SH} ./alias.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} alias.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-all b/tests/run-all
new file mode 100644
index 0000000..b8219b2
--- /dev/null
+++ b/tests/run-all
@@ -0,0 +1,64 @@
+#! /bin/sh
+#
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+: ${TMPDIR:=/tmp}
+export TMPDIR
+
+# basic /bin/sh syntax
+SUFFIX=`${THIS_SH} -c 'echo $(( $RANDOM + $BASHPID ))'`
+
+BASH_TSTOUT=${TMPDIR}/bashtst-$SUFFIX	# for now
+export BASH_TSTOUT
+
+trap 'rm -f $BASH_TSTOUT' 0 1 2 3 15
+
+PATH=.:$PATH	# just to get recho/zecho/printenv if not run via `make tests'
+export PATH
+
+
+# unset BASH_ENV only if it is set
+[ "${BASH_ENV+set}" = "set" ] && unset BASH_ENV
+# can't reliably do it for SHELLOPTS; SHELLOPTS is readonly in bash
+if [ "${BASH_VERSION+set}" = "set" ]; then
+	export -n SHELLOPTS	# just make sure its not exported
+	set +o posix
+	typeset -p SHELLOPTS
+else
+	[ "${SHELLOPTS+set}" = "set" ] && unset SHELLOPTS 2>/dev/null
+fi
+
+: ${THIS_SH:=../bash}
+export THIS_SH
+
+: ${BUILD_DIR:=..}
+export BUILD_DIR
+
+${THIS_SH} ./version
+
+rm -f ${BASH_TSTOUT}
+
+echo Any output from any test, unless otherwise noted, indicates a possible anomaly
+
+for x in run-*
+do
+	case $x in
+	$0|run-minimal|run-gprof)	;;
+	*.orig|*~) ;;
+	*)	echo $x ; sh $x ; rm -f ${BASH_TSTOUT} ;;
+	esac
+done
+
+exit 0
diff --git a/tests/run-appendop b/tests/run-appendop
new file mode 100644
index 0000000..2d756f8
--- /dev/null
+++ b/tests/run-appendop
@@ -0,0 +1,2 @@
+${THIS_SH} ./appendop.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} appendop.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-arith b/tests/run-arith
new file mode 100644
index 0000000..0786b4f
--- /dev/null
+++ b/tests/run-arith
@@ -0,0 +1,2 @@
+${THIS_SH} ./arith.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} arith.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-arith-for b/tests/run-arith-for
new file mode 100644
index 0000000..085715e
--- /dev/null
+++ b/tests/run-arith-for
@@ -0,0 +1,2 @@
+${THIS_SH} ./arith-for.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} arith-for.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-array b/tests/run-array
new file mode 100644
index 0000000..6c5ec27
--- /dev/null
+++ b/tests/run-array
@@ -0,0 +1,6 @@
+echo "warning: all of these tests will fail if arrays have not" >&2
+echo "warning: been compiled into the shell" >&2
+echo "warning: the BASH_ARGC and BASH_ARGV tests will fail if debugging support" >&2
+echo "warning: has not been compiled into the shell" >&2
+${THIS_SH} ./array.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} array.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-array2 b/tests/run-array2
new file mode 100644
index 0000000..54852ec
--- /dev/null
+++ b/tests/run-array2
@@ -0,0 +1,4 @@
+echo "warning: all of these tests will fail if arrays have not" >&2
+echo "warning: been compiled into the shell" >&2
+${THIS_SH} ./array-at-star > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} array2.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-assoc b/tests/run-assoc
new file mode 100644
index 0000000..7fef234
--- /dev/null
+++ b/tests/run-assoc
@@ -0,0 +1,4 @@
+echo "warning: all of these tests will fail if arrays have not" >&2
+echo "warning: been compiled into the shell" >&2
+${THIS_SH} ./assoc.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} assoc.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-attr b/tests/run-attr
new file mode 100644
index 0000000..948b9e1
--- /dev/null
+++ b/tests/run-attr
@@ -0,0 +1,2 @@
+${THIS_SH} ./attr.tests 2>&1 | grep -v '^expect' > ${BASH_TSTOUT}
+diff ${BASH_TSTOUT} attr.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-braces b/tests/run-braces
new file mode 100644
index 0000000..554e218
--- /dev/null
+++ b/tests/run-braces
@@ -0,0 +1,2 @@
+${THIS_SH} ./braces.tests > ${BASH_TSTOUT}
+diff ${BASH_TSTOUT} braces.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-builtins b/tests/run-builtins
new file mode 100644
index 0000000..69644f2
--- /dev/null
+++ b/tests/run-builtins
@@ -0,0 +1,6 @@
+echo "warning: some of these tests may fail if process substitution has not" >&2
+echo "warning: been compiled into the shell or if the OS does not provide" >&2
+echo "warning: /dev/fd." >&2
+
+${THIS_SH} ./builtins.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} builtins.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-case b/tests/run-case
new file mode 100644
index 0000000..1560ee2
--- /dev/null
+++ b/tests/run-case
@@ -0,0 +1,2 @@
+${THIS_SH} ./case.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} case.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-casemod b/tests/run-casemod
new file mode 100644
index 0000000..9b58764
--- /dev/null
+++ b/tests/run-casemod
@@ -0,0 +1,2 @@
+${THIS_SH} ./casemod.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} casemod.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-complete b/tests/run-complete
new file mode 100644
index 0000000..f1cef84
--- /dev/null
+++ b/tests/run-complete
@@ -0,0 +1,2 @@
+${THIS_SH} ./complete.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} complete.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-comsub b/tests/run-comsub
new file mode 100644
index 0000000..4c3d1cf
--- /dev/null
+++ b/tests/run-comsub
@@ -0,0 +1,2 @@
+${THIS_SH} ./comsub.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} comsub.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-comsub-eof b/tests/run-comsub-eof
new file mode 100644
index 0000000..0733b2d
--- /dev/null
+++ b/tests/run-comsub-eof
@@ -0,0 +1,2 @@
+${THIS_SH} ./comsub-eof.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} comsub-eof.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-comsub-posix b/tests/run-comsub-posix
new file mode 100644
index 0000000..520cb44
--- /dev/null
+++ b/tests/run-comsub-posix
@@ -0,0 +1,2 @@
+${THIS_SH} ./comsub-posix.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} comsub-posix.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-cond b/tests/run-cond
new file mode 100644
index 0000000..603e739
--- /dev/null
+++ b/tests/run-cond
@@ -0,0 +1,7 @@
+echo "warning: all of these tests will fail if the conditional command has not" >&2
+echo "warning: been compiled into the shell" >&2
+echo "warning: some of these tests will fail if extended pattern matching has not" >&2
+echo "warning: been compiled into the shell" >&2
+
+${THIS_SH} ./cond.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} cond.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-coproc b/tests/run-coproc
new file mode 100644
index 0000000..02c5c92
--- /dev/null
+++ b/tests/run-coproc
@@ -0,0 +1,2 @@
+${THIS_SH} ./coproc.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} coproc.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-cprint b/tests/run-cprint
new file mode 100644
index 0000000..82d2c2a
--- /dev/null
+++ b/tests/run-cprint
@@ -0,0 +1,2 @@
+${THIS_SH} ./cprint.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} cprint.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-dbg-support b/tests/run-dbg-support
new file mode 100644
index 0000000..af64517
--- /dev/null
+++ b/tests/run-dbg-support
@@ -0,0 +1,9 @@
+
+TEST_NAME='dbg-support'
+TEST_FILE="/tmp/${TEST_NAME}.check"
+${THIS_SH} ./${TEST_NAME}.tests > $TEST_FILE 2>&1 < /dev/null
+set -f
+diff $TEST_FILE ${TEST_NAME}.right && rm -f $TEST_FILE
+
+# Return code tells testing mechanism whether passed or not.
+exit $?
diff --git a/tests/run-dbg-support2 b/tests/run-dbg-support2
new file mode 100644
index 0000000..375c32f
--- /dev/null
+++ b/tests/run-dbg-support2
@@ -0,0 +1,9 @@
+
+TEST_NAME='dbg-support2'
+TEST_FILE="/tmp/${TEST_NAME}.check"
+${THIS_SH} ./${TEST_NAME}.tests > $TEST_FILE 2>&1 < /dev/null
+set -f
+diff $TEST_FILE ${TEST_NAME}.right && rm -f $TEST_FILE
+
+# Return code tells testing mechanism whether passed or not.
+exit $?
diff --git a/tests/run-dirstack b/tests/run-dirstack
new file mode 100644
index 0000000..e6b42d4
--- /dev/null
+++ b/tests/run-dirstack
@@ -0,0 +1,5 @@
+${THIS_SH} ./dstack.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} dstack.right && rm -f ${BASH_TSTOUT}
+
+${THIS_SH} ./dstack2.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} dstack2.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-dollars b/tests/run-dollars
new file mode 100644
index 0000000..dc5d623
--- /dev/null
+++ b/tests/run-dollars
@@ -0,0 +1,2 @@
+${THIS_SH} ./dollar-at-star > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} dollar.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-dynvar b/tests/run-dynvar
new file mode 100644
index 0000000..26c5434
--- /dev/null
+++ b/tests/run-dynvar
@@ -0,0 +1,2 @@
+${THIS_SH} ./dynvar.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} dynvar.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-errors b/tests/run-errors
new file mode 100644
index 0000000..29417cd
--- /dev/null
+++ b/tests/run-errors
@@ -0,0 +1,3 @@
+unset OLDPWD	# make sure shell doesn't inherit OLDPWD
+${THIS_SH} ./errors.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} errors.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-execscript b/tests/run-execscript
new file mode 100644
index 0000000..de78644
--- /dev/null
+++ b/tests/run-execscript
@@ -0,0 +1,9 @@
+echo "warning: the text of a system error message may vary between systems and" >&2
+echo "warning: produce diff output." >&2
+echo "warning: if the text of the error messages concerning \`notthere' or" >&2
+echo "warning: \`/tmp/bash-notthere' not being found or \`/' being a directory" >&2
+echo "warning: produce diff output, please do not consider this a test failure" >&2
+echo "warning: if diff output differing only in the location of the bash" >&2
+echo "warning: binary appears, please do not consider this a test failure" >&2
+${THIS_SH} ./execscript > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} exec.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-exp-tests b/tests/run-exp-tests
new file mode 100644
index 0000000..78cf754
--- /dev/null
+++ b/tests/run-exp-tests
@@ -0,0 +1,2 @@
+${THIS_SH} ./exp.tests 2>&1 | grep -v '^expect' > ${BASH_TSTOUT}
+diff ${BASH_TSTOUT} exp.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-exportfunc b/tests/run-exportfunc
new file mode 100644
index 0000000..7b207fa
--- /dev/null
+++ b/tests/run-exportfunc
@@ -0,0 +1,2 @@
+${THIS_SH} ./exportfunc.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} exportfunc.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-extglob b/tests/run-extglob
new file mode 100644
index 0000000..149e34a
--- /dev/null
+++ b/tests/run-extglob
@@ -0,0 +1,4 @@
+PATH=$PATH:`pwd`
+export PATH
+${THIS_SH} ./extglob.tests | grep -v '^expect' > ${BASH_TSTOUT}
+diff ${BASH_TSTOUT} extglob.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-extglob2 b/tests/run-extglob2
new file mode 100644
index 0000000..71d3d80
--- /dev/null
+++ b/tests/run-extglob2
@@ -0,0 +1,4 @@
+PATH=$PATH:`pwd`
+export PATH
+${THIS_SH} ./extglob2.tests | grep -v '^expect' > ${BASH_TSTOUT}
+diff ${BASH_TSTOUT} extglob2.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-extglob3 b/tests/run-extglob3
new file mode 100644
index 0000000..6ebd674
--- /dev/null
+++ b/tests/run-extglob3
@@ -0,0 +1,4 @@
+PATH=$PATH:`pwd`
+export PATH
+${THIS_SH} ./extglob3.tests > ${BASH_TSTOUT}
+diff ${BASH_TSTOUT} extglob3.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-func b/tests/run-func
new file mode 100644
index 0000000..a804364
--- /dev/null
+++ b/tests/run-func
@@ -0,0 +1,5 @@
+echo "warning: if you have exported functions defined in your environment," >&2
+echo "warning: they may show up as diff output." >&2
+echo "warning: if so, please do not consider this a test failure" >&2
+${THIS_SH} ./func.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} func.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-getopts b/tests/run-getopts
new file mode 100644
index 0000000..4cfc592
--- /dev/null
+++ b/tests/run-getopts
@@ -0,0 +1,2 @@
+${THIS_SH} ./getopts.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} getopts.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-glob-test b/tests/run-glob-test
new file mode 100644
index 0000000..246501c
--- /dev/null
+++ b/tests/run-glob-test
@@ -0,0 +1,7 @@
+PATH=$PATH:`pwd`
+export PATH
+
+( diff -a glob.right glob.right >/dev/null 2>&1 ) && AFLAG=-a
+
+${THIS_SH} ./glob.tests > ${BASH_TSTOUT} 2>&1
+diff ${AFLAG} ${BASH_TSTOUT} glob.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-globstar b/tests/run-globstar
new file mode 100644
index 0000000..3aa01ed
--- /dev/null
+++ b/tests/run-globstar
@@ -0,0 +1,4 @@
+PATH=$PATH:`pwd`
+export PATH
+${THIS_SH} ./globstar.tests  > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} globstar.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-heredoc b/tests/run-heredoc
new file mode 100644
index 0000000..b655c4f
--- /dev/null
+++ b/tests/run-heredoc
@@ -0,0 +1,6 @@
+echo "warning: UNIX versions number signals and schedule processes differently." >&2
+echo "warning: If output differing only in line numbers is produced, please" >&2
+echo "warning: do not consider this a test failure." >&2
+
+${THIS_SH} ./heredoc.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} heredoc.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-herestr b/tests/run-herestr
new file mode 100644
index 0000000..d6def9c
--- /dev/null
+++ b/tests/run-herestr
@@ -0,0 +1,2 @@
+${THIS_SH} ./herestr.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} herestr.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-histexpand b/tests/run-histexpand
new file mode 100644
index 0000000..a0fc331
--- /dev/null
+++ b/tests/run-histexpand
@@ -0,0 +1,4 @@
+echo "warning: all of these tests will fail if history has not been compiled" >&2
+echo "warning: into the shell" >&2
+${THIS_SH} ./histexp.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} histexp.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-history b/tests/run-history
new file mode 100644
index 0000000..f4fa466
--- /dev/null
+++ b/tests/run-history
@@ -0,0 +1,4 @@
+echo "warning: all of these tests will fail if history has not been compiled" >&2
+echo "warning: into the shell" >&2
+${THIS_SH} ./history.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} history.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-ifs b/tests/run-ifs
new file mode 100644
index 0000000..394d998
--- /dev/null
+++ b/tests/run-ifs
@@ -0,0 +1,2 @@
+${THIS_SH} ./ifs.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} ifs.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-ifs-posix b/tests/run-ifs-posix
new file mode 100644
index 0000000..895c2e2
--- /dev/null
+++ b/tests/run-ifs-posix
@@ -0,0 +1,2 @@
+${THIS_SH} ./ifs-posix.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} ifs-posix.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-input-test b/tests/run-input-test
new file mode 100644
index 0000000..412587c
--- /dev/null
+++ b/tests/run-input-test
@@ -0,0 +1,2 @@
+${THIS_SH} < ./input-line.sh > ${BASH_TSTOUT}
+diff ${BASH_TSTOUT} input.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-intl b/tests/run-intl
new file mode 100644
index 0000000..c31d1d0
--- /dev/null
+++ b/tests/run-intl
@@ -0,0 +1,8 @@
+# See whether or not we can use `diff -a'
+( diff -a ./intl.right ./intl.right >/dev/null 2>&1 ) && AFLAG=-a
+
+echo "warning: some of these tests will fail if you do not have UTF-8" >&2
+echo "warning: locales installed on your system." >&2
+
+${THIS_SH} ./intl.tests > ${BASH_TSTOUT}
+diff $AFLAG ${BASH_TSTOUT} intl.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-invert b/tests/run-invert
new file mode 100644
index 0000000..b2bd06e
--- /dev/null
+++ b/tests/run-invert
@@ -0,0 +1,2 @@
+${THIS_SH} ./invert.tests 2>&1 | grep -v '^expect' > ${BASH_TSTOUT}
+diff ${BASH_TSTOUT} invert.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-iquote b/tests/run-iquote
new file mode 100644
index 0000000..4fca94a
--- /dev/null
+++ b/tests/run-iquote
@@ -0,0 +1,2 @@
+${THIS_SH} ./iquote.tests >${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} iquote.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-jobs b/tests/run-jobs
new file mode 100644
index 0000000..8429b0d
--- /dev/null
+++ b/tests/run-jobs
@@ -0,0 +1,7 @@
+echo "warning: some of these tests may fail if job control has not been compiled" >&2
+echo "warning: into the shell" >&2
+echo "warning: there may be a message regarding a cat process dying due to a" >&2
+echo "warning: SIGHUP.  Please disregard." >&2
+
+${THIS_SH} ./jobs.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} jobs.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-lastpipe b/tests/run-lastpipe
new file mode 100644
index 0000000..2edf5c4
--- /dev/null
+++ b/tests/run-lastpipe
@@ -0,0 +1,2 @@
+${THIS_SH} ./lastpipe.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} lastpipe.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-mapfile b/tests/run-mapfile
new file mode 100644
index 0000000..e5d1b38
--- /dev/null
+++ b/tests/run-mapfile
@@ -0,0 +1,2 @@
+${THIS_SH} ./mapfile.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} mapfile.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-minimal b/tests/run-minimal
new file mode 100644
index 0000000..ade30b1
--- /dev/null
+++ b/tests/run-minimal
@@ -0,0 +1,68 @@
+#! /bin/sh
+#
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+#
+# run-minimal - a version of run-all for shells configured with
+#		--enable-minimal-config
+#
+
+: ${TMPDIR:=/tmp}
+export TMPDIR
+
+# basic /bin/sh syntax
+SUFFIX=`${THIS_SH} -c 'echo $(( $RANDOM + $BASHPID ))'`
+
+BASH_TSTOUT=${TMPDIR}/bashtst-$SUFFIX	# for now
+export BASH_TSTOUT
+
+trap 'rm -f $BASH_TSTOUT' 0
+
+PATH=.:$PATH	# just to get the right version of printenv
+export PATH
+
+# unset BASH_ENV only if it is set
+[ "${BASH_ENV+set}" = "set" ] && unset BASH_ENV
+# ditto for SHELLOPTS
+#[ "${SHELLOPTS+set}" = "set" ] && unset SHELLOPTS
+
+: ${THIS_SH:=../bash}
+export THIS_SH
+
+: ${BUILD_DIR:=..}
+export BUILD_DIR
+
+${THIS_SH} ./version.mini
+
+rm -f "$BASH_TSTOUT"
+
+echo Testing ${THIS_SH}
+echo Any output from any test, unless otherwise noted, indicates a possible anomaly
+for x in run-*
+do
+	case $x in
+	$0)	;;
+	*.orig|*~) ;;
+	run-dollars|run-execscript|run-func|run-getopts|run-heredoc) echo $x ; sh $x ;;
+	run-ifs-tests|run-input-test|run-invert|run-more-exp|run-nquote) echo $x ; sh $x ;;
+	run-ifs-posix|run-posix2|run-posixpat|run-posixpipe) echo $x ; sh $x ;;
+	run-precedence|run-quote|run-read|run-rhs-exp|run-strip|run-tilde) echo $x ; sh $x ;;
+	run-dynvar) echo $x ; sh $x ;;
+	;;
+	*)	;;
+	esac
+	rm -f "$BASH_TSTOUT"
+done
+
+exit 0
diff --git a/tests/run-more-exp b/tests/run-more-exp
new file mode 100644
index 0000000..0424a2f
--- /dev/null
+++ b/tests/run-more-exp
@@ -0,0 +1,2 @@
+${THIS_SH} ./more-exp.tests 2>&1 | grep -v '^expect' > ${BASH_TSTOUT}
+diff ${BASH_TSTOUT} more-exp.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-nameref b/tests/run-nameref
new file mode 100644
index 0000000..b73e1b8
--- /dev/null
+++ b/tests/run-nameref
@@ -0,0 +1,4 @@
+echo "warning: some of these tests will fail if arrays have not" >&2
+echo "warning: been compiled into the shell" >&2
+${THIS_SH} ./nameref.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} nameref.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-new-exp b/tests/run-new-exp
new file mode 100644
index 0000000..8777c7b
--- /dev/null
+++ b/tests/run-new-exp
@@ -0,0 +1,10 @@
+echo "warning: two of these tests will fail if your OS does not support" >&2
+echo "warning: named pipes or the /dev/fd filesystem.  If the tests of the" >&2
+echo "warning: process substitution mechanism fail, please do not consider" >&2
+echo "warning: this a test failure" >&2
+echo "warning: if you have exported variables beginning with the string _Q," >&2
+echo "warning: diff output may be generated.  If so, please do not consider" >&2
+echo "warning: this a test failure" >&2
+
+${THIS_SH} ./new-exp.tests 2>&1 | grep -v '^expect' > ${BASH_TSTOUT}
+diff ${BASH_TSTOUT} new-exp.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-nquote b/tests/run-nquote
new file mode 100644
index 0000000..03954b8
--- /dev/null
+++ b/tests/run-nquote
@@ -0,0 +1,2 @@
+${THIS_SH} ./nquote.tests 2>&1 | grep -v '^expect' > ${BASH_TSTOUT}
+diff ${BASH_TSTOUT} nquote.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-nquote1 b/tests/run-nquote1
new file mode 100644
index 0000000..bd9e939
--- /dev/null
+++ b/tests/run-nquote1
@@ -0,0 +1,4 @@
+echo "warning: several of these tests will fail if arrays have not" >&2
+echo "warning: been compiled into the shell." >&2
+${THIS_SH} ./nquote1.tests 2>&1 | grep -v '^expect' > ${BASH_TSTOUT}
+diff ${BASH_TSTOUT} nquote1.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-nquote2 b/tests/run-nquote2
new file mode 100644
index 0000000..4648d3e
--- /dev/null
+++ b/tests/run-nquote2
@@ -0,0 +1,4 @@
+echo "warning: several of these tests will fail if arrays have not" >&2
+echo "warning: been compiled into the shell." >&2
+${THIS_SH} ./nquote2.tests 2>&1 | grep -v '^expect' > ${BASH_TSTOUT}
+diff ${BASH_TSTOUT} nquote2.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-nquote3 b/tests/run-nquote3
new file mode 100644
index 0000000..4a3e32a
--- /dev/null
+++ b/tests/run-nquote3
@@ -0,0 +1,4 @@
+echo "warning: several of these tests will fail if arrays have not" >&2
+echo "warning: been compiled into the shell." >&2
+${THIS_SH} ./nquote3.tests 2>&1 | grep -v '^expect' > ${BASH_TSTOUT}
+diff ${BASH_TSTOUT} nquote3.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-nquote4 b/tests/run-nquote4
new file mode 100644
index 0000000..985c311
--- /dev/null
+++ b/tests/run-nquote4
@@ -0,0 +1,8 @@
+# See whether or not we can use `diff -a'
+( diff -a ./nquote4.right ./nquote4.right >/dev/null 2>&1 ) && AFLAG=-a
+
+echo warning: some of these tests will fail if you do not have UTF-8 >&2
+echo warning: locales installed on your system >&2
+
+${THIS_SH} ./nquote4.tests > ${BASH_TSTOUT} 2>&1
+diff ${AFLAG} ${BASH_TSTOUT} nquote4.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-nquote5 b/tests/run-nquote5
new file mode 100644
index 0000000..1d4c4aa
--- /dev/null
+++ b/tests/run-nquote5
@@ -0,0 +1,2 @@
+${THIS_SH} ./nquote5.tests 2>&1 | grep -v '^expect' > ${BASH_TSTOUT}
+diff ${BASH_TSTOUT} nquote5.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-parser b/tests/run-parser
new file mode 100644
index 0000000..ea1ec49
--- /dev/null
+++ b/tests/run-parser
@@ -0,0 +1,2 @@
+${THIS_SH} ./parser.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} parser.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-posix2 b/tests/run-posix2
new file mode 100644
index 0000000..cfa9571
--- /dev/null
+++ b/tests/run-posix2
@@ -0,0 +1,2 @@
+${THIS_SH} ./posix2.tests 2>&1 | grep -v '^expect' > ${BASH_TSTOUT}
+diff ${BASH_TSTOUT} posix2.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-posixexp b/tests/run-posixexp
new file mode 100644
index 0000000..827b0e4
--- /dev/null
+++ b/tests/run-posixexp
@@ -0,0 +1,2 @@
+${THIS_SH} ./posixexp.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} posixexp.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-posixexp2 b/tests/run-posixexp2
new file mode 100644
index 0000000..1e6b2d9
--- /dev/null
+++ b/tests/run-posixexp2
@@ -0,0 +1,2 @@
+${THIS_SH} ./posixexp2.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} posixexp2.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-posixpat b/tests/run-posixpat
new file mode 100644
index 0000000..8937948
--- /dev/null
+++ b/tests/run-posixpat
@@ -0,0 +1,2 @@
+${THIS_SH} ./posixpat.tests > ${BASH_TSTOUT}
+diff ${BASH_TSTOUT} posixpat.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-posixpipe b/tests/run-posixpipe
new file mode 100644
index 0000000..5f099e2
--- /dev/null
+++ b/tests/run-posixpipe
@@ -0,0 +1,2 @@
+${THIS_SH} ./posixpipe.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} posixpipe.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-precedence b/tests/run-precedence
new file mode 100644
index 0000000..06ac343
--- /dev/null
+++ b/tests/run-precedence
@@ -0,0 +1,2 @@
+${THIS_SH} ./precedence.tests > ${BASH_TSTOUT}
+diff ${BASH_TSTOUT} prec.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-printf b/tests/run-printf
new file mode 100644
index 0000000..e242787
--- /dev/null
+++ b/tests/run-printf
@@ -0,0 +1,7 @@
+# See whether or not we can use `diff -a'
+#( diff -a ./printf.tests ./printf.tests >/dev/null 2>&1 ) && AFLAG=-a
+
+# use cat -v (and assume it's there) to make control chars visible
+${THIS_SH} ./printf.tests 2>&1 | cat -v > ${BASH_TSTOUT} 
+#diff $AFLAG ${BASH_TSTOUT} printf.right && rm -f ${BASH_TSTOUT}
+diff ${BASH_TSTOUT} printf.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-procsub b/tests/run-procsub
new file mode 100644
index 0000000..796faaa
--- /dev/null
+++ b/tests/run-procsub
@@ -0,0 +1,7 @@
+echo "warning: all of these tests will fail if process substitution has not" >&2
+echo "warning: been compiled into the shell or if the OS does not provide" >&2
+echo "warning: FIFOs or /dev/fd. Some tests may fail if the OS does not" >&2
+echo "warning: provide FIFOs." >&2
+
+${THIS_SH} ./procsub.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} procsub.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-quote b/tests/run-quote
new file mode 100644
index 0000000..2543666
--- /dev/null
+++ b/tests/run-quote
@@ -0,0 +1,2 @@
+${THIS_SH} ./quote.tests >${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} quote.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-read b/tests/run-read
new file mode 100644
index 0000000..5ec07e2
--- /dev/null
+++ b/tests/run-read
@@ -0,0 +1,4 @@
+echo "warning: please do not consider output differing only in the amount of" >&2
+echo "warning: white space to be an error." >&2
+${THIS_SH} ./read.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} read.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-redir b/tests/run-redir
new file mode 100644
index 0000000..071af6e
--- /dev/null
+++ b/tests/run-redir
@@ -0,0 +1,7 @@
+echo "warning: the text of a system error message may vary between systems and" >&2
+echo "warning: produce diff output." >&2
+echo "warning: if the text of an error message concerning \`redir1.*' not being" >&2
+echo "warning: found or messages concerning bad file descriptors produce diff" >&2
+echo "warning: output, please do not consider it a test failure" >&2
+${THIS_SH} ./redir.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} redir.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-rhs-exp b/tests/run-rhs-exp
new file mode 100644
index 0000000..de8ae0e
--- /dev/null
+++ b/tests/run-rhs-exp
@@ -0,0 +1,2 @@
+${THIS_SH} ./rhs-exp.tests 2>&1 > ${BASH_TSTOUT}
+diff ${BASH_TSTOUT} rhs-exp.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-rsh b/tests/run-rsh
new file mode 100644
index 0000000..6770699
--- /dev/null
+++ b/tests/run-rsh
@@ -0,0 +1,2 @@
+${THIS_SH} ./rsh.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} rsh.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-set-e b/tests/run-set-e
new file mode 100644
index 0000000..eed17fa
--- /dev/null
+++ b/tests/run-set-e
@@ -0,0 +1,2 @@
+${THIS_SH} ./set-e.tests > ${BASH_TSTOUT}
+diff ${BASH_TSTOUT} set-e.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-set-x b/tests/run-set-x
new file mode 100644
index 0000000..b999e69
--- /dev/null
+++ b/tests/run-set-x
@@ -0,0 +1,11 @@
+#!../bash
+#$Id: run-set-x,v 1.1 2002/12/09 13:12:37 rockyb Exp $
+
+TEST_NAME='set-x'
+TEST_FILE="/tmp/${TEST_NAME}.check"
+${THIS_SH} ./${TEST_NAME}.tests > $TEST_FILE 2>&1 < /dev/null
+set -f
+diff $TEST_FILE ${TEST_NAME}.right && rm -f $TEST_FILE
+
+# Return code tells testing mechanism whether passed or not.
+exit $?
diff --git a/tests/run-shopt b/tests/run-shopt
new file mode 100644
index 0000000..02c43e7
--- /dev/null
+++ b/tests/run-shopt
@@ -0,0 +1,2 @@
+${THIS_SH} ./shopt.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} shopt.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-strip b/tests/run-strip
new file mode 100644
index 0000000..46a9da9
--- /dev/null
+++ b/tests/run-strip
@@ -0,0 +1,2 @@
+${THIS_SH} ./strip.tests > ${BASH_TSTOUT}
+diff ${BASH_TSTOUT} strip.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-test b/tests/run-test
new file mode 100644
index 0000000..d68791c
--- /dev/null
+++ b/tests/run-test
@@ -0,0 +1,4 @@
+unset GROUPS UID 2>/dev/null
+
+${THIS_SH} ./test.tests >${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} test.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-tilde b/tests/run-tilde
new file mode 100644
index 0000000..9460225
--- /dev/null
+++ b/tests/run-tilde
@@ -0,0 +1,2 @@
+${THIS_SH} ./tilde.tests > ${BASH_TSTOUT}
+diff ${BASH_TSTOUT} tilde.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-tilde2 b/tests/run-tilde2
new file mode 100644
index 0000000..fa7e7d6
--- /dev/null
+++ b/tests/run-tilde2
@@ -0,0 +1,2 @@
+${THIS_SH} ./tilde2.tests > ${BASH_TSTOUT}
+diff ${BASH_TSTOUT} tilde2.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-trap b/tests/run-trap
new file mode 100644
index 0000000..e3331ed
--- /dev/null
+++ b/tests/run-trap
@@ -0,0 +1,6 @@
+echo "warning: UNIX versions number signals and schedule processes differently." >&2
+echo "warning: If output differing only in line numbers is produced, please" >&2
+echo "warning: do not consider this a test failure." >&2
+
+${THIS_SH} ./trap.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} trap.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-type b/tests/run-type
new file mode 100644
index 0000000..499cb4e
--- /dev/null
+++ b/tests/run-type
@@ -0,0 +1,2 @@
+${THIS_SH} ./type.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} type.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-varenv b/tests/run-varenv
new file mode 100644
index 0000000..be394cc
--- /dev/null
+++ b/tests/run-varenv
@@ -0,0 +1,4 @@
+echo "warning: some of these tests will fail if arrays have not" >&2
+echo "warning: been compiled into the shell" >&2
+${THIS_SH} ./varenv.tests 2>&1 | grep -v '^expect' > ${BASH_TSTOUT}
+diff ${BASH_TSTOUT} varenv.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/run-vredir b/tests/run-vredir
new file mode 100644
index 0000000..2bdc1b8
--- /dev/null
+++ b/tests/run-vredir
@@ -0,0 +1,4 @@
+echo "warning: the text of a system error message may vary between systems and" >&2
+echo "warning: produce diff output." >&2
+${THIS_SH} ./vredir.tests > ${BASH_TSTOUT} 2>&1
+diff ${BASH_TSTOUT} vredir.right && rm -f ${BASH_TSTOUT}
diff --git a/tests/set-e.right b/tests/set-e.right
new file mode 100644
index 0000000..e2a9f2c
--- /dev/null
+++ b/tests/set-e.right
@@ -0,0 +1,72 @@
+95
+96
+97
+98
+99
+0
+1
+2
+3
+4
+5
+6
+7
+8
+9
+1
+1
+ok
+hi
+while succeeded
+until succeeded: 4
+if succeeded
+AND list succeeded
+OR list succeeded
+! succeeded
+eval succeeded
+! eval succeeded -- 1
+! eval succeeded -- 2
+a
+0
+b
+0
+after 1
+a
+0
+non-posix foo
+after brace group failure: 1
+A 1
+B 0
+C 0
+D 0
+D 1
+A 1
+B 0
+C 0
+D 0
+D 1
+A 1
+B 0
+C 0
+A 1
+B 1
+C 0
+B 0
+C 0
+after negation 1: 0
+after negation 2: 0
+after negation 3: 1
+after negation 4: 0
+after brace pipeline
+foo
+after failure 1
+after failure 2
+after failure 3
+true || false no exit
+false || true no exit
+false && false no exit
+A:
+B:
+ehB
+C:
+D:
diff --git a/tests/set-e.tests b/tests/set-e.tests
new file mode 100644
index 0000000..3e0d669
--- /dev/null
+++ b/tests/set-e.tests
@@ -0,0 +1,124 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+if : ; then
+	set -e
+	N=95
+	while :; do
+		# expr returns 1 if expression is null or 0
+		set +e
+		N_MOD_100=`expr $N % 100`
+		set -e
+		echo $N_MOD_100
+		N=`expr $N + 1`
+		if [ $N -eq 110 ]; then
+			break
+		fi
+	done
+	set +e
+fi
+
+(
+set -e
+false
+echo bad
+)
+echo $?
+
+x=$(
+set -e
+false
+echo bad
+)
+echo $? $x
+
+# command subst should not inherit -e
+set -e
+echo $(false; echo ok)
+
+if set +e
+then
+	false
+fi
+echo hi
+
+set -e
+
+# a failing command in the compound list following a while, until, or
+# if should not cause the shell to exit
+
+while false; do
+	echo hi
+done
+echo while succeeded
+
+x=1
+until (( x == 4 )); do
+	x=4
+done
+echo until succeeded: $x
+
+if false; then
+	echo oops
+fi
+echo if succeeded
+
+# failing commands that are part of an AND or OR list should not
+# cause the shell to exit
+false && echo AND list failed
+echo AND list succeeded
+
+false || echo OR list succeeded
+
+! false
+echo ! succeeded
+
+# make sure eval preserves the state of the -e flag and `!' reserved word
+set -e
+if eval false; then
+	echo oops
+fi
+echo eval succeeded
+
+! eval false
+echo ! eval succeeded -- 1
+
+! eval '(exit 5)'
+echo ! eval succeeded -- 2
+
+set -e
+until builtin false; do echo a; break; done
+echo $?
+
+until eval false; do echo b; break; done
+echo $?
+
+: ${TMPDIR:=/tmp}
+FN=$TMPDIR/set-e-$$
+cat > $FN << EOF
+false
+echo after 1
+false
+EOF
+
+set -e
+until . $FN; do echo a; break; done
+echo $?
+
+rm -f $FN
+
+set +e
+
+${THIS_SH} ./set-e1.sub
+${THIS_SH} ./set-e2.sub
+${THIS_SH} ./set-e3.sub
diff --git a/tests/set-e1.sub b/tests/set-e1.sub
new file mode 100644
index 0000000..cdd4d63
--- /dev/null
+++ b/tests/set-e1.sub
@@ -0,0 +1,72 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# subshell failure should cause the shell to exit silently
+${THIS_SH} -ce '(exit 17) ; echo "after (exit 17): $?"'
+
+# pipeline failure should cause shell to exit silently
+${THIS_SH} -c 'set -e ; false | echo foo | while read x ; do ( exit 17 ) ; done; echo after pipeline subshell;'
+
+# should be silent in posix mode
+${THIS_SH} -c 'set -o posix; set -e ; z=$(false;echo posix foo) ; echo $z'
+# but echo foo in non-posix
+${THIS_SH} -c 'set -e ; z=$(false;echo non-posix foo) ; echo $z'
+
+${THIS_SH} -ce 'x=$(false) ; echo "x=\$(false) does not exit"'
+
+${THIS_SH} -ce '{ false; echo false in brace group does not exit; }'
+echo after brace group failure: $?
+
+${THIS_SH} -ce '(false ; echo A $?) && echo B $?; echo C $?'; echo D $?
+
+${THIS_SH} -ce '(false ; echo A $?) ; echo B $?; echo C $?'; echo D $?
+
+${THIS_SH} -ce 'f() (false ; echo A $?); f && echo B $?; echo C $?'; echo D $?
+
+${THIS_SH} -ce 'f() (false ; echo A $?) ; f; echo B $?; echo C $?'; echo D $?
+
+${THIS_SH} -ce 'if false; echo A $?; then echo B $?; fi'; echo C $?
+
+${THIS_SH} -ce '! { false; echo A $?; } | cat; echo B $?'; echo C $?
+
+${THIS_SH} -ce '{ false; echo A $?; } | cat ; echo B $?'; echo C $?
+
+set -e
+
+! false
+echo after negation 1: $?
+
+! false | false
+echo after negation 2: $?
+
+! true
+echo after negation 3: $?
+
+! (false)
+echo after negation 4: $?
+
+{ false ; echo foo; } | cat
+echo after brace pipeline
+
+false | echo foo | cat
+echo after failure 1
+
+false | (echo foo; false) | true
+echo after failure 2
+
+false | echo foo | while read x ; do ( exit 17 ) ; done | true
+echo after failure 3
+
+# this pipeline failure should cause the shell to exit
+false | echo foo | false
+echo after failure 4
diff --git a/tests/set-e2.sub b/tests/set-e2.sub
new file mode 100644
index 0000000..de04e99
--- /dev/null
+++ b/tests/set-e2.sub
@@ -0,0 +1,10 @@
+${THIS_SH} -ce 'true || false ; echo "true || false no exit"'
+${THIS_SH} -ce 'false || false ; echo "false || false no exit"'
+${THIS_SH} -ce 'false || true ; echo "false || true no exit"'
+
+${THIS_SH} -ce 'false && false ; echo "false && false no exit"'
+${THIS_SH} -ce 'true && false ; echo "true && false no exit"'
+
+${THIS_SH} -ce 'true && (exit 1) ; echo "true && (exit 1) no exit"'
+${THIS_SH} -ce 'true && true|false ; echo "true && true|false no exit"'
+${THIS_SH} -ce 'true && true|(false) ; echo "true && true|(false) no exit"'
diff --git a/tests/set-e3.sub b/tests/set-e3.sub
new file mode 100644
index 0000000..db176b1
--- /dev/null
+++ b/tests/set-e3.sub
@@ -0,0 +1,10 @@
+foo()
+{
+	echo A:
+	. ./set-e3a.sub
+	echo D:
+}
+
+# should run all the way through; foo being called in a context where set -e
+# is ignored means that that condition persists through sourcing the file
+foo && true
diff --git a/tests/set-e3a.sub b/tests/set-e3a.sub
new file mode 100644
index 0000000..5d008e7
--- /dev/null
+++ b/tests/set-e3a.sub
@@ -0,0 +1,7 @@
+echo B:
+
+set -e
+echo $-
+false
+
+echo C:
diff --git a/tests/set-x.right b/tests/set-x.right
new file mode 100644
index 0000000..259602e
--- /dev/null
+++ b/tests/set-x.right
@@ -0,0 +1,60 @@
++ (( i=0 ))
++ (( i<=5 ))
++ x=0
++ (( i++  ))
++ (( i<=5 ))
++ x=0
++ (( i++  ))
++ (( i<=5 ))
++ x=0
++ (( i++  ))
++ (( i<=5 ))
++ x=0
++ (( i++  ))
++ (( i<=5 ))
++ x=0
++ (( i++  ))
++ (( i<=5 ))
++ x=0
++ (( i++  ))
++ (( i<=5 ))
++ for i in 0 1 2
++ x=i
++ for i in 0 1 2
++ x=i
++ for i in 0 1 2
++ x=i
++ case x in
++ x=i
++ foo=one
++ foo+=two
++ echo onetwo
+onetwo
++ set +x
+1
+2
+3
+4
++ for f in a b c d e
++ echo a
+a
++ for f in a b c d e
++ echo b
+b
++ for f in a b c d e
++ echo c
+c
++ for f in a b c d e
++ echo d
+d
++ for f in a b c d e
++ echo e
+e
++ set +x
+TRACEFILE:
++ echo 1
++ echo 2
++ echo 3
++ echo 4
++ unset BASH_XTRACEFD
+=====
diff --git a/tests/set-x.tests b/tests/set-x.tests
new file mode 100644
index 0000000..3723552
--- /dev/null
+++ b/tests/set-x.tests
@@ -0,0 +1,38 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+# $Id: set-x.tests,v 1.1 2002/12/09 13:12:37 rockyb Exp $
+#
+# Test that "set -x" shows what we think it should.
+#
+set -x
+for ((i=0; i<=5; i++ )) ; do
+  x=0
+done
+for i in 0 1 2 ; do
+  x=i
+done
+case x in 
+ 0) x=i ;;
+ *) x=i ;;
+esac
+
+foo=one
+foo+=two
+echo $foo
+
+set +x
+
+# test BASH_XTRACEFD
+${THIS_SH} ./set-x1.sub
diff --git a/tests/set-x1.sub b/tests/set-x1.sub
new file mode 100644
index 0000000..cb7fa82
--- /dev/null
+++ b/tests/set-x1.sub
@@ -0,0 +1,38 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+: ${TMPDIR:=/var/tmp}
+TRACEFILE=$TMPDIR/bash-trace-$$
+trap 'rm -f $TRACEFILE' 0 1 2 3 6 15
+
+exec 4>$TRACEFILE
+BASH_XTRACEFD=4
+
+set -x
+
+echo 1
+echo 2
+echo 3
+echo 4
+
+unset BASH_XTRACEFD
+
+for f in a b c d e; do echo $f ; done
+
+set +x
+
+echo TRACEFILE:
+cat $TRACEFILE
+echo =====
+
+exit 0
diff --git a/tests/shopt.right b/tests/shopt.right
new file mode 100644
index 0000000..8cf46db
--- /dev/null
+++ b/tests/shopt.right
@@ -0,0 +1,298 @@
+./shopt.tests: line 15: shopt: -z: invalid option
+shopt: usage: shopt [-pqsu] [-o] [optname ...]
+--
+shopt -u autocd
+shopt -u assoc_expand_once
+shopt -u cdable_vars
+shopt -s cdspell
+shopt -u checkhash
+shopt -u checkjobs
+shopt -u checkwinsize
+shopt -s cmdhist
+shopt -u compat31
+shopt -u compat32
+shopt -u compat40
+shopt -u compat41
+shopt -u compat42
+shopt -u compat43
+shopt -u compat44
+shopt -s complete_fullquote
+shopt -u direxpand
+shopt -u dirspell
+shopt -u dotglob
+shopt -u execfail
+shopt -s expand_aliases
+shopt -u extdebug
+shopt -u extglob
+shopt -s extquote
+shopt -u failglob
+shopt -s force_fignore
+shopt -s globasciiranges
+shopt -u globstar
+shopt -u gnu_errfmt
+shopt -u histappend
+shopt -u histreedit
+shopt -u histverify
+shopt -s hostcomplete
+shopt -u huponexit
+shopt -u inherit_errexit
+shopt -s interactive_comments
+shopt -u lastpipe
+shopt -u lithist
+shopt -u localvar_inherit
+shopt -u localvar_unset
+shopt -u login_shell
+shopt -u mailwarn
+shopt -u no_empty_cmd_completion
+shopt -u nocaseglob
+shopt -u nocasematch
+shopt -u nullglob
+shopt -s progcomp
+shopt -u progcomp_alias
+shopt -s promptvars
+shopt -u restricted_shell
+shopt -u shift_verbose
+shopt -s sourcepath
+shopt -u xpg_echo
+--
+shopt -u huponexit
+shopt -u checkwinsize
+shopt -s sourcepath
+--
+shopt -s cdspell
+shopt -s cmdhist
+shopt -s complete_fullquote
+shopt -s expand_aliases
+shopt -s extquote
+shopt -s force_fignore
+shopt -s globasciiranges
+shopt -s hostcomplete
+shopt -s interactive_comments
+shopt -s progcomp
+shopt -s promptvars
+shopt -s sourcepath
+--
+shopt -u autocd
+shopt -u assoc_expand_once
+shopt -u cdable_vars
+shopt -u checkhash
+shopt -u checkjobs
+shopt -u checkwinsize
+shopt -u compat31
+shopt -u compat32
+shopt -u compat40
+shopt -u compat41
+shopt -u compat42
+shopt -u compat43
+shopt -u compat44
+shopt -u direxpand
+shopt -u dirspell
+shopt -u dotglob
+shopt -u execfail
+shopt -u extdebug
+shopt -u extglob
+shopt -u failglob
+shopt -u globstar
+shopt -u gnu_errfmt
+shopt -u histappend
+shopt -u histreedit
+shopt -u histverify
+shopt -u huponexit
+shopt -u inherit_errexit
+shopt -u lastpipe
+shopt -u lithist
+shopt -u localvar_inherit
+shopt -u localvar_unset
+shopt -u login_shell
+shopt -u mailwarn
+shopt -u no_empty_cmd_completion
+shopt -u nocaseglob
+shopt -u nocasematch
+shopt -u nullglob
+shopt -u progcomp_alias
+shopt -u restricted_shell
+shopt -u shift_verbose
+shopt -u xpg_echo
+--
+autocd         	off
+assoc_expand_once	off
+cdable_vars    	off
+checkhash      	off
+checkjobs      	off
+checkwinsize   	off
+compat31       	off
+compat32       	off
+compat40       	off
+compat41       	off
+compat42       	off
+compat43       	off
+compat44       	off
+direxpand      	off
+dirspell       	off
+dotglob        	off
+execfail       	off
+extdebug       	off
+extglob        	off
+failglob       	off
+globstar       	off
+gnu_errfmt     	off
+histappend     	off
+histreedit     	off
+histverify     	off
+huponexit      	off
+inherit_errexit	off
+lastpipe       	off
+lithist        	off
+localvar_inherit	off
+localvar_unset 	off
+login_shell    	off
+mailwarn       	off
+no_empty_cmd_completion	off
+nocaseglob     	off
+nocasematch    	off
+nullglob       	off
+progcomp_alias 	off
+restricted_shell	off
+shift_verbose  	off
+xpg_echo       	off
+--
+set +o allexport
+set -o braceexpand
+set -o emacs
+set +o errexit
+set +o errtrace
+set +o functrace
+set -o hashall
+set -o histexpand
+set -o history
+set +o ignoreeof
+set -o interactive-comments
+set +o keyword
+set -o monitor
+set +o noclobber
+set +o noexec
+set +o noglob
+set +o nolog
+set +o notify
+set +o nounset
+set +o onecmd
+set +o physical
+set +o pipefail
+set +o posix
+set -o privileged
+set +o verbose
+set +o vi
+set +o xtrace
+--
+allexport      	off
+braceexpand    	on
+emacs          	on
+errexit        	off
+errtrace       	off
+functrace      	off
+hashall        	on
+histexpand     	on
+history        	on
+ignoreeof      	off
+interactive-comments	on
+keyword        	off
+monitor        	on
+noclobber      	off
+noexec         	off
+noglob         	off
+nolog          	off
+notify         	off
+nounset        	off
+onecmd         	off
+physical       	off
+pipefail       	off
+posix          	off
+privileged     	on
+verbose        	off
+vi             	off
+xtrace         	off
+--
+set +o allexport
+set -o braceexpand
+set -o emacs
+set +o errexit
+set +o errtrace
+set +o functrace
+set -o hashall
+set -o histexpand
+set -o history
+set +o ignoreeof
+set -o interactive-comments
+set +o keyword
+set -o monitor
+set +o noclobber
+set +o noexec
+set +o noglob
+set +o nolog
+set +o notify
+set +o nounset
+set +o onecmd
+set +o physical
+set +o pipefail
+set +o posix
+set -o privileged
+set +o verbose
+set +o vi
+set +o xtrace
+--
+set -o history
+set +o verbose
+--
+set -o braceexpand
+set -o emacs
+set -o hashall
+set -o histexpand
+set -o history
+set -o interactive-comments
+set -o monitor
+set -o privileged
+--
+set +o allexport
+set +o errexit
+set +o errtrace
+set +o functrace
+set +o ignoreeof
+set +o keyword
+set +o noclobber
+set +o noexec
+set +o noglob
+set +o nolog
+set +o notify
+set +o nounset
+set +o onecmd
+set +o physical
+set +o pipefail
+set +o posix
+set +o verbose
+set +o vi
+set +o xtrace
+--
+allexport      	off
+errexit        	off
+errtrace       	off
+functrace      	off
+ignoreeof      	off
+keyword        	off
+noclobber      	off
+noexec         	off
+noglob         	off
+nolog          	off
+notify         	off
+nounset        	off
+onecmd         	off
+physical       	off
+pipefail       	off
+posix          	off
+verbose        	off
+vi             	off
+xtrace         	off
+--
+./shopt.tests: line 106: shopt: xyz1: invalid shell option name
+./shopt.tests: line 107: shopt: xyz1: invalid option name
+expand_aliases 	on
+expand_aliases 	on
diff --git a/tests/shopt.tests b/tests/shopt.tests
new file mode 100644
index 0000000..c31870c
--- /dev/null
+++ b/tests/shopt.tests
@@ -0,0 +1,113 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# let's try an error message first
+shopt -z
+
+# first, set up a known environment
+shopt -u cdable_vars
+shopt -s cdspell
+shopt -u checkhash
+shopt -u checkwinsize
+shopt -s cmdhist
+shopt -u dotglob
+shopt -u execfail
+shopt -s expand_aliases
+shopt -u extglob
+shopt -u histreedit
+shopt -u histappend
+shopt -u histverify
+shopt -s hostcomplete
+shopt -u huponexit
+shopt -s interactive_comments
+shopt -u lithist
+shopt -u mailwarn
+shopt -u nocaseglob
+shopt -u nullglob
+shopt -s promptvars
+shopt -u shift_verbose
+shopt -s sourcepath
+shopt -u xpg_echo
+
+# Now, start checking the output
+builtin printf -- "--\n"
+shopt -p	# list 'em all
+builtin printf -- "--\n"
+# test specific variables
+shopt -p huponexit
+shopt -p checkwinsize
+shopt -p sourcepath
+
+builtin printf -- "--\n"
+shopt -s -p
+builtin printf -- "--\n"
+shopt -u -p
+builtin printf -- "--\n"
+shopt -u
+
+# Now set up another known environment
+set +o allexport
+set -o braceexpand
+set +o errexit
+set -o hashall
+set -o histexpand
+set +o keyword
+set -o monitor
+set +o noclobber
+set +o noexec
+set +o noglob
+set +o notify
+set +o nounset
+set +o onecmd
+set +o physical
+set -o privileged
+set +o verbose
+set +o xtrace
+set -o history
+set +o ignoreeof
+set -o interactive-comments
+set +o posix
+set -o emacs
+set +o vi
+
+# list 'em all
+builtin printf -- "--\n"
+shopt -o -p
+
+builtin printf -- "--\n"
+set -o
+builtin printf -- "--\n"
+set +o
+
+# test specific variables
+builtin printf -- "--\n"
+shopt -p -o history
+shopt -p -o verbose
+
+builtin printf -- "--\n"
+shopt -s -p -o
+builtin printf -- "--\n"
+shopt -u -p -o
+builtin printf -- "--\n"
+shopt -u -o
+
+# errors
+builtin printf -- "--\n"
+shopt -p xyz1
+shopt -o -p xyz1
+
+${THIS_SH} ./shopt1.sub
+
+# test whether or not temporary variable assignments that manipulate posix
+# mode restore the previous state or the default non-posix state
+${THIS_SH} -c 'shopt -s expand_aliases ; shopt expand_aliases ; POSIXLY_CORRECT=y true ; shopt expand_aliases'
diff --git a/tests/shopt1.sub b/tests/shopt1.sub
new file mode 100644
index 0000000..8c1150f
--- /dev/null
+++ b/tests/shopt1.sub
@@ -0,0 +1,52 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+# verify all shopt options are reset properly when the shell is reinitialized
+
+: ${TMPDIR:=/var/tmp} ${THIS_SH:=$PWD/bash}
+
+t1=$(mktemp)
+t2=$(mktemp)
+
+if [ ! -e "$t1" ] ; then
+	S1=$RANDOM
+	S2=$RANDOM
+	t1=$TMPDIR/s-$S1
+	t2=$TMPDIR/s-$S2
+	touch "$t1" "$t2"
+fi
+
+chmod +x "$t1" "$t2"
+
+echo "shopt" > "$t1"
+
+echo "#!${THIS_SH}" > "$t2"
+echo "shopt" >> "$t2"
+
+for o in $(compgen -A shopt)
+do
+	case $o in
+	extdebug)	;;
+	*)		shopt -s $o ;;
+	esac
+done
+diff <("$t1") <("$t2")
+
+for o in $(compgen -A shopt)
+do
+	shopt -u $o;
+done
+diff <("$t1") <("$t2")
+
+rm "$t1" "$t2"
diff --git a/tests/source1.sub b/tests/source1.sub
new file mode 100644
index 0000000..8b8586f
--- /dev/null
+++ b/tests/source1.sub
@@ -0,0 +1 @@
+echo $AVAR
diff --git a/tests/source2.sub b/tests/source2.sub
new file mode 100644
index 0000000..7a031a1
--- /dev/null
+++ b/tests/source2.sub
@@ -0,0 +1,5 @@
+echo in source.sub2, calling return
+
+return 5
+
+echo oops -- return in source.sub2 failed
diff --git a/tests/source3.sub b/tests/source3.sub
new file mode 100644
index 0000000..4a12501
--- /dev/null
+++ b/tests/source3.sub
@@ -0,0 +1 @@
+echo "$@"
diff --git a/tests/source4.sub b/tests/source4.sub
new file mode 100644
index 0000000..717c1ab
--- /dev/null
+++ b/tests/source4.sub
@@ -0,0 +1 @@
+set -- m n o p
diff --git a/tests/source5.sub b/tests/source5.sub
new file mode 100644
index 0000000..4149c11
--- /dev/null
+++ b/tests/source5.sub
@@ -0,0 +1,32 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+LC_ALL=en_US.UTF-8
+unset LC_ALL
+unset LANG
+export LC_ALL=C
+export LANG=C
+
+set +o posix
+
+# attempting to source a non-existent file is not an error...
+. /tmp/source-notthere
+
+echo after bad source 1
+
+set -o posix
+
+# ...unless you're in posix mode
+. /tmp/source-notthere
+
+echo after bad source 2
diff --git a/tests/source6.sub b/tests/source6.sub
new file mode 100644
index 0000000..2437292
--- /dev/null
+++ b/tests/source6.sub
@@ -0,0 +1,49 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# tests sourcing non-regular files, fixed post-3.2
+
+: ${TMPDIR:=/tmp}
+
+TMPFN=$TMPDIR/foo-$$
+
+rm -f $TMPFN
+echo "echo one - OK" > $TMPFN
+. $TMPFN
+echo $?
+rm -f $TMPFN
+
+# non-regular readable file
+. /dev/null
+echo $?
+
+# FIFO or pipe via /dev/fd
+. <(echo "echo two - OK")
+echo $?
+
+# pipe
+if [ -e /dev/stdin ]; then
+echo "echo three - OK" | . /dev/stdin
+echo $?
+else
+# no /dev/stdin, just fake it
+echo "three - OK" ; echo 0
+fi
+
+# FIFO
+mkfifo $TMPDIR/fifo-$$
+echo "echo four - OK" > $TMPDIR/fifo-$$ &
+sleep 1		# allow the child echo to execute
+. $TMPDIR/fifo-$$
+echo $?
+rm -f $TMPDIR/fifo-$$
diff --git a/tests/source7.sub b/tests/source7.sub
new file mode 100644
index 0000000..474a66f
--- /dev/null
+++ b/tests/source7.sub
@@ -0,0 +1,53 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+shopt -s expand_aliases
+
+: ${TMPDIR:=/var/tmp}
+
+echo '((echo abc; echo def;); echo ghi)' > $TMPDIR/x28-$$
+. $TMPDIR/x28-$$
+rm -f $TMPDIR/x28-$$
+
+echo after
+
+TMPFILE=$TMPDIR/x29-$$
+
+echo "#! ${THIS_SH}" >$TMPFILE
+cat >> $TMPFILE << \EOF
+
+(echo -n "$1 "; echo subshell)
+EOF
+chmod 755 $TMPFILE
+
+alias foo1='$TMPFILE one.1; source $TMPFILE two.1; source $TMPFILE three.1; $TMPFILE four.1'
+alias foo2='$TMPFILE one.2;
+source $TMPFILE two.2;
+source $TMPFILE three.2;
+$TMPFILE four.2;
+'
+
+foo1
+foo2
+
+echo x29 - done
+rm -f $TMPFILE
+
+# this is also treated similarly to an alias expansion internally
+((echo abc; echo def;); echo ghi)
+
+if (((4+4) + (4 + 7))); then
+	echo ok
+fi
+
+(())	# make sure the null expression works OK
diff --git a/tests/strip.right b/tests/strip.right
new file mode 100644
index 0000000..dfab897
--- /dev/null
+++ b/tests/strip.right
@@ -0,0 +1,12 @@
+''
+' ab '
+' '
+''
+''
+''
+'ababababababab'
+'ababababababab  '
+'ababababababab  '
+'abababa
+bababab  '
+''
diff --git a/tests/strip.tests b/tests/strip.tests
new file mode 100644
index 0000000..b16705f
--- /dev/null
+++ b/tests/strip.tests
@@ -0,0 +1,35 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+v=`echo "" ; echo "" ; echo ""`
+echo "'$v'"
+v=`echo -n " ab "`
+echo "'$v'"
+v=`echo -n " "`
+echo "'$v'"
+v=`echo -n ""`
+echo "'$v'"
+v=`echo ""`
+echo "'$v'"
+v=`echo`
+echo "'$v'"
+v=`echo ababababababab`
+echo "'$v'"
+v=`echo "ababababababab  "`
+echo "'$v'"
+v=`echo -n "ababababababab  "`
+echo "'$v'"
+v=`echo -ne "abababa\nbababab  "`
+echo "'$v'"
+v="`echo -e '\n\n\n\n'`"
+echo "'$v'"
diff --git a/tests/test-glue-functions b/tests/test-glue-functions
new file mode 100644
index 0000000..07ad821
--- /dev/null
+++ b/tests/test-glue-functions
@@ -0,0 +1,13 @@
+# shell functions to include in multiple test files
+
+# squeeze out blanks to avoid white space differences in od implementations
+_intl_normalize_spaces()
+{
+	sed -e 's/[[:space:]]\{1,\}/ /g' -e 's/[[:space:]]*$//'
+}
+
+# avoid whitespace differences in wc implementations
+_cut_leading_spaces()
+{
+	sed -e 's/^[ 	]*//g'
+}
diff --git a/tests/test.right b/tests/test.right
new file mode 100644
index 0000000..391edbb
--- /dev/null
+++ b/tests/test.right
@@ -0,0 +1,295 @@
+t -a noexist
+1
+t -a run-all
+0
+t -b run-all
+1
+t -b /dev/jb1a
+1
+t -c run-all
+1
+t -c /dev/tty
+0
+t -d run-all
+1
+t -d /etc
+0
+t -d ""
+1
+b -d ""
+1
+t -e noexist
+1
+t -e run-all
+0
+t -f noexist
+1
+t -f /dev/tty
+1
+t -f run-all
+0
+t -g run-all
+1
+t -g /tmp/test.setgid
+0
+t -k run-all
+1
+t -n ""
+1
+t -n "hello"
+0
+t -p run-all
+1
+t -r noexist
+1
+t -r /tmp/test.noread
+1
+t -r run-all
+0
+t -s noexist
+1
+t -s /dev/null
+1
+t -s run-all
+0
+t -t 20
+1
+t -t 0
+0
+t -u noexist
+1
+t -u run-all
+1
+t -u /tmp/test.setuid
+0
+t -w noexist
+1
+t -w /tmp/test.nowrite
+1
+t -w /dev/null
+0
+t -x noexist
+1
+t -x /tmp/test.exec
+0
+t -x /tmp/test.noexec
+1
+t -z ""
+0
+t -z "foo"
+1
+t "foo"
+0
+t ""
+1
+t -O /tmp/test.owner
+0
+t -S /tmp/test.socket
+1
+t -N /tmp/test.newer
+0
+t "hello" = "hello"
+0
+t "hello" = "goodbye"
+1
+t "hello" == "hello"
+0
+t "hello" == "goodbye"
+1
+t "hello" != "hello"
+1
+t "hello" != "goodbye"
+0
+t "hello" < "goodbye"
+1
+t "hello" > "goodbye"
+0
+t ! "hello" > "goodbye"
+1
+t 200 -eq 200
+0
+t 34 -eq 222
+1
+t -32 -eq 32
+1
+t 200 -ne 200
+1
+t 34 -ne 222
+0
+t 200 -gt 200
+1
+t 340 -gt 222
+0
+t 200 -ge 200
+0
+t 34 -ge 222
+1
+t 200 -lt 200
+1
+t 34 -lt 222
+0
+t 200 -le 200
+0
+t 340 -le 222
+1
+t 700 -le 1000 -a -n "1" -a "20" = "20"
+0
+t ! \( 700 -le 1000 -a -n "1" -a "20" = "20" \)
+1
+t /tmp/abc -nt /tmp/def
+1
+t /tmp/abc -ot /tmp/def
+0
+t /tmp/def -nt /tmp/abc
+0
+t /tmp/def -ot /tmp/abc
+1
+t /tmp/abc -ef /tmp/def
+1
+t /tmp/abc -ef /tmp/ghi
+0
+t -r /dev/fd/0
+0
+t -w /dev/fd/1
+0
+t -w /dev/fd/2
+0
+t -r /dev/stdin
+0
+t -w /dev/stdout
+0
+t -w /dev/stderr
+0
+t
+1
+b
+1
+t 12 -eq 34
+1
+t ! 12 -eq 34
+0
+t -n abcd -o aaa
+0
+t -n abcd -o -z aaa
+0
+t -n abcd -a aaa
+0
+t -n abcd -a -z aaa
+1
+t -o allexport
+1
+t ! -o allexport
+0
+t -v unset
+1
+t -v set
+0
+t -v set
+0
+t xx -a yy
+0
+t xx -o ""
+0
+t xx -a ""
+1
+t -X -a -X
+0
+t -X -o -X
+0
+t -X -o ""
+0
+t -X -a ""
+1
+t "" -a -X
+1
+t "" -o -X
+0
+t "" -a ""
+1
+t "" -o ""
+1
+t true -o -X
+0
+t true -a -X
+0
+t ( -E )
+0
+t ( "" )
+1
+t ! -z "$z"
+0
+t ! -n "$z"
+1
+t "$zero"
+1
+t ! "$zero"
+0
+b "$zero"
+1
+b ! "$zero"
+0
+t -G /tmp/test.group
+0
+t -h /tmp/test.symlink
+0
+t 4+3 -eq 7
+./test.tests: line 26: test: 4+3: integer expression expected
+2
+b 4-5 -eq 7
+./test.tests: line 20: [: 4+3: integer expression expected
+2
+t 9 -eq 4+5
+./test.tests: line 26: test: 4+5: integer expression expected
+2
+b 9 -eq 4+5
+./test.tests: line 20: [: 4+5: integer expression expected
+2
+t A -eq 7
+./test.tests: line 26: test: A: integer expression expected
+2
+b A -eq 7
+./test.tests: line 20: [: A: integer expression expected
+2
+t 9 -eq B
+./test.tests: line 26: test: B: integer expression expected
+2
+b 9 -eq B
+./test.tests: line 20: [: B: integer expression expected
+2
+t ( 1 = 2
+./test.tests: line 26: test: `)' expected
+2
+b ( 1 = 2
+./test.tests: line 20: [: `)' expected, found ]
+2
+./test.tests: line 26: test: a: unary operator expected
+2
+./test.tests: line 26: test: b: binary operator expected
+2
+./test.tests: line 26: test: -A: unary operator expected
+2
+./test.tests: line 26: test: syntax error: `-ne' unexpected
+2
+./test.tests: line 26: test: too many arguments
+2
+./test.tests: line 431: [: missing `]'
+2
+./test.tests: line 26: test: (: unary operator expected
+2
+t -t a
+1
+t -t addsds
+1
+t -t 42
+1
+t -t /dev/tty
+1
+t -t /dev/tty4
+1
+t -t /dev/tty4444444...
+1
+1
+t -p /dev/fd/6
+1
+t -p /dev/fd/6
+0
diff --git a/tests/test.tests b/tests/test.tests
new file mode 100644
index 0000000..03e2754
--- /dev/null
+++ b/tests/test.tests
@@ -0,0 +1,453 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+if (( $UID == 0 )); then
+	echo "test-tests: the test suite should not be run as root" >&2
+fi
+
+b()
+{
+	[ "$@" ]
+	echo $?
+}
+
+t()
+{
+	test "$@"
+	echo $?
+}
+
+echo 't -a noexist'
+t -a noexist
+echo 't -a run-all'
+t -a run-all
+
+echo 't -b run-all'
+t -b run-all
+echo 't -b /dev/jb1a'
+t -b /dev/jb1a
+
+echo 't -c run-all'
+t -c run-all
+echo 't -c /dev/tty'
+t -c /dev/tty
+
+echo 't -d run-all'
+t -d run-all
+echo 't -d /etc'
+t -d /etc
+echo 't -d ""'
+t -d ""
+echo 'b -d ""'
+b -d ""
+
+echo 't -e noexist'
+t -e noexist
+echo 't -e run-all'
+t -e run-all
+
+echo 't -f noexist'
+t -f noexist
+echo 't -f /dev/tty'
+t -f /dev/tty
+echo 't -f run-all'
+t -f run-all
+
+echo 't -g run-all'
+t -g run-all
+
+touch /tmp/test.setgid
+chgrp ${GROUPS[0]} /tmp/test.setgid
+chmod ug+x /tmp/test.setgid
+chmod g+s /tmp/test.setgid
+echo 't -g /tmp/test.setgid'
+t -g /tmp/test.setgid
+rm -f /tmp/test.setgid
+
+echo 't -k run-all'
+t -k run-all
+
+echo 't -n ""'
+t -n ""
+echo 't -n "hello"'
+t -n "hello"
+
+echo 't -p run-all'
+t -p run-all
+
+echo 't -r noexist'
+t -r noexist
+
+if (( $UID != 0 )); then
+	touch /tmp/test.noread
+	chmod a-r /tmp/test.noread
+	echo 't -r /tmp/test.noread'
+	t -r /tmp/test.noread
+	rm -f /tmp/test.noread
+else
+	echo 't -r /tmp/test.noread'
+	echo 1
+fi
+
+echo 't -r run-all'
+t -r run-all
+
+echo 't -s noexist'
+t -s noexist
+echo 't -s /dev/null'
+t -s /dev/null
+echo 't -s run-all'
+t -s run-all
+
+echo 't -t 20'
+t -t 20
+echo 't -t 0'
+t -t 0 < /dev/tty
+
+echo 't -u noexist'
+t -u noexist
+
+echo 't -u run-all'
+t -u run-all
+
+touch /tmp/test.setuid
+chmod u+x /tmp/test.setuid	# some systems require this to turn on setuid bit
+chmod u+s /tmp/test.setuid
+echo 't -u /tmp/test.setuid'
+t -u /tmp/test.setuid
+rm -f /tmp/test.setuid
+
+echo 't -w noexist'
+t -w noexist
+
+if (( $UID != 0 )); then
+	touch /tmp/test.nowrite
+	chmod a-w /tmp/test.nowrite
+	echo 't -w /tmp/test.nowrite'
+	t -w /tmp/test.nowrite
+	rm -f /tmp/test.nowrite
+else
+	echo 't -w /tmp/test.nowrite'
+	echo 1
+fi
+
+echo 't -w /dev/null'
+t -w /dev/null
+
+echo 't -x noexist'
+t -x noexist
+
+touch /tmp/test.exec
+chmod u+x /tmp/test.exec
+echo 't -x /tmp/test.exec'
+t -x /tmp/test.exec
+rm -f /tmp/test.exec
+
+touch /tmp/test.noexec
+chmod u-x /tmp/test.noexec
+echo 't -x /tmp/test.noexec'
+t -x /tmp/test.noexec
+rm -f /tmp/test.noexec
+
+echo 't -z ""'
+t -z ""
+echo 't -z "foo"'
+t -z "foo"
+
+echo 't "foo"'
+t "foo"
+echo 't ""'
+t ""
+
+touch /tmp/test.owner
+echo 't -O /tmp/test.owner'
+t -O /tmp/test.owner
+rm -f /tmp/test.owner
+
+touch /tmp/test.socket
+echo 't -S /tmp/test.socket'
+t -S /tmp/test.socket	# false
+rm -f /tmp/test.socket
+
+touch /tmp/test.newer ; sleep 1; echo "hello" > /tmp/test.newer
+echo 't -N /tmp/test.newer'
+t -N /tmp/test.newer
+rm -f /tmp/test.newer
+
+echo 't "hello" = "hello"'
+t "hello" = "hello"
+echo 't "hello" = "goodbye"'
+t "hello" = "goodbye"
+
+echo 't "hello" == "hello"'
+t "hello" == "hello"
+echo 't "hello" == "goodbye"'
+t "hello" == "goodbye"
+
+echo 't "hello" != "hello"'
+t "hello" != "hello"
+echo 't "hello" != "goodbye"'
+t "hello" != "goodbye"
+
+echo 't "hello" < "goodbye"'
+t "hello" \< "goodbye"
+echo 't "hello" > "goodbye"'
+t "hello" \> "goodbye"
+
+echo 't ! "hello" > "goodbye"'
+t "! hello" \> "goodbye"
+
+echo 't 200 -eq 200'
+t 200 -eq 200
+echo 't 34 -eq 222'
+t 34 -eq 222
+echo 't -32 -eq 32'
+t -32 -eq 32
+
+echo 't 200 -ne 200'
+t 200 -ne 200
+echo 't 34 -ne 222'
+t 34 -ne 222
+
+echo 't 200 -gt 200'
+t 200 -gt 200
+echo 't 340 -gt 222'
+t 340 -gt 222
+
+echo 't 200 -ge 200'
+t 200 -ge 200
+echo 't 34 -ge 222'
+t 34 -ge 222
+
+echo 't 200 -lt 200'
+t 200 -lt 200
+echo 't 34 -lt 222'
+t 34 -lt 222
+
+echo 't 200 -le 200'
+t 200 -le 200
+echo 't 340 -le 222'
+t 340 -le 222
+
+echo 't 700 -le 1000 -a -n "1" -a "20" = "20"'
+t 700 -le 1000 -a -n "1" -a "20" = "20"
+echo 't ! \( 700 -le 1000 -a -n "1" -a "20" = "20" \)'
+t ! \( 700 -le 1000 -a -n "1" -a "20" = "20" \)
+
+touch /tmp/abc
+sleep 2
+touch /tmp/def
+
+echo 't /tmp/abc -nt /tmp/def'
+t /tmp/abc -nt /tmp/def
+echo 't /tmp/abc -ot /tmp/def'
+t /tmp/abc -ot /tmp/def
+echo 't /tmp/def -nt /tmp/abc'
+t /tmp/def -nt /tmp/abc
+echo 't /tmp/def -ot /tmp/abc'
+t /tmp/def -ot /tmp/abc
+
+echo 't /tmp/abc -ef /tmp/def'
+t /tmp/abc -ef /tmp/def
+ln /tmp/abc /tmp/ghi
+echo 't /tmp/abc -ef /tmp/ghi'
+t /tmp/abc -ef /tmp/ghi
+
+rm /tmp/abc /tmp/def /tmp/ghi
+
+echo 't -r /dev/fd/0'
+t -r /dev/fd/0
+echo 't -w /dev/fd/1'
+t -w /dev/fd/1
+echo 't -w /dev/fd/2'
+t -w /dev/fd/2
+
+echo 't -r /dev/stdin'
+t -r /dev/stdin
+echo 't -w /dev/stdout'
+t -w /dev/stdout
+echo 't -w /dev/stderr'
+t -w /dev/stderr
+
+echo 't'
+t
+echo 'b'
+b
+
+echo 't 12 -eq 34'
+t 12 -eq 34
+echo 't ! 12 -eq 34'
+t ! 12 -eq 34
+
+echo 't -n abcd -o aaa'
+t -n abcd -o aaa
+echo 't -n abcd -o -z aaa'
+t -n abcd -o -z aaa
+
+echo 't -n abcd -a aaa'
+t -n abcd -a aaa
+echo 't -n abcd -a -z aaa'
+t -n abcd -a -z aaa
+
+# test set or unset shell options
+set +o allexport
+echo 't -o allexport'
+t -o allexport
+echo 't ! -o allexport'
+t ! -o allexport
+
+#test set or unset shell variables
+unset unset
+echo 't -v unset'
+t -v unset
+set=
+echo 't -v set'
+t -v set
+set=set
+echo 't -v set'
+t -v set
+
+echo 't xx -a yy'
+t xx -a yy
+echo 't xx -o ""'
+t xx -o ""
+echo 't xx -a ""'
+t xx -a ""
+
+echo 't -X -a -X'
+t -X -a -X
+echo 't -X -o -X'
+t -X -o -X
+echo 't -X -o ""'
+t -X -o ""
+echo 't -X -a ""'
+t -X -a ""
+echo 't "" -a -X'
+t "" -a -X
+echo 't "" -o -X'
+t "" -o -X
+echo 't "" -a ""'
+t "" -a ""
+echo 't "" -o ""'
+t "" -o ""
+echo 't true -o -X'
+t true -o -X
+echo 't true -a -X'
+t true -a -X
+
+echo 't ( -E )'
+t \( -E \)
+echo 't ( "" )'
+t \( "" \)
+
+z=42
+
+echo 't ! -z "$z"'
+t ! -z "$z"
+
+echo 't ! -n "$z"'
+t ! -n "$z"
+
+zero=
+echo 't "$zero"'
+t "$zero"
+echo 't ! "$zero"'
+t ! "$zero"
+echo 'b "$zero"'
+b "$zero"
+echo 'b ! "$zero"'
+b ! "$zero"
+
+touch /tmp/test.group
+chgrp ${GROUPS[0]} /tmp/test.group
+echo 't -G /tmp/test.group'
+t -G /tmp/test.group
+rm /tmp/test.group
+
+case "${THIS_SH}" in
+/*)	SHNAME=${THIS_SH} ;;
+*)	SHNAME=${PWD}/${THIS_SH} ;;
+esac
+
+if ln -s ${SHNAME} /tmp/test.symlink 2>/dev/null; then
+	chgrp ${GROUPS[0]} /tmp/test.symlink 2>/dev/null
+	echo 't -h /tmp/test.symlink'
+	t -h /tmp/test.symlink
+	# some systems don't let you remove this
+	rm -f /tmp/test.symlink 2>/dev/null
+else
+	echo 't -h /tmp/test.symlink'
+	echo 0
+fi
+
+# arithmetic constant errors
+echo "t 4+3 -eq 7"
+t 4+3 -eq 7
+echo "b 4-5 -eq 7"
+b 4+3 -eq 7
+
+echo "t 9 -eq 4+5"
+t 9 -eq 4+5
+echo "b 9 -eq 4+5"
+b 9 -eq 4+5
+
+A=7
+echo "t A -eq 7"
+t A -eq 7
+echo "b A -eq 7"
+b A -eq 7
+
+B=9
+echo "t 9 -eq B"
+t 9 -eq B
+echo "b 9 -eq B"
+b 9 -eq B
+
+# badly formed expressions
+echo 't ( 1 = 2'
+t \( 1 = 2
+echo 'b ( 1 = 2'
+b \( 1 = 2
+
+# more errors
+t a b
+t a b c
+t -A v
+# too many arguments -- argument expected is also reasonable
+t 4 -eq 4 -a 2 -ne 5 -a 4 -ne
+# too many arguments
+t 4 -eq 4 -a 3 4
+
+[
+echo $?
+
+t \( \)
+
+# non-numeric arguments to `test -t' should return failure -- fix in 2.05
+echo 't -t a'
+t -t a
+echo 't -t addsds'
+t -t addsds
+echo 't -t 42'
+t -t 42
+echo 't -t /dev/tty'
+t -t /dev/tty
+echo 't -t /dev/tty4'
+t -t /dev/tty4
+echo 't -t /dev/tty4444444...'
+t -t /dev/tty4444444...
+
+# fixed in bash-4.0-beta
+t -t ' '
+
+${THIS_SH} ./test1.sub
diff --git a/tests/test1.sub b/tests/test1.sub
new file mode 100644
index 0000000..d25e0dc
--- /dev/null
+++ b/tests/test1.sub
@@ -0,0 +1,34 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# some systems, like old SunOS, have stat on /dev/fd/N and fstat(N, ...)
+# return different results
+: ${TMPDIR:=/tmp}
+
+trap 'rm -f ${TMPDIR}/pipe' 0 1 2 3 6 15
+
+exec 6>&-
+echo "t -p /dev/fd/6"
+test -p /dev/fd/6
+echo $?
+
+rm -f ${TMPDIR}/pipe 2>/dev/null
+mkfifo ${TMPDIR}/pipe
+cat < ${TMPDIR}/pipe &
+exec 6>&-
+exec 6>${TMPDIR}/pipe
+echo "t -p /dev/fd/6"
+test -p /dev/fd/6
+echo $?
+exec 2>/dev/null	# disable process termination message
+kill $! 2>/dev/null 
diff --git a/tests/tilde.right b/tests/tilde.right
new file mode 100644
index 0000000..1301c0b
--- /dev/null
+++ b/tests/tilde.right
@@ -0,0 +1,28 @@
+~chet
+/usr/xyz/foo
+~chet/foo
+~chet/foo
+~chet/bar
+~chet/bar
+~chet/bar
+:~chet/
+abcd~chet
+SHELL=~/bash
+/usr/xyz/bash
+abcd:~chet
+/usr/ucb:/bin:/usr/xyz/bin:/usr/xyz/tmp/bin:/usr/bin
+/usr
+/tmp
+/bin:/usr/bin:.:/usr/xyz/bin
+/bin:/usr/bin:.:~/bin
+/bin:/usr/bin:.:/usr/xyz/bin
+/bin:/usr/bin:.:/usr/xyz/bin
+/bin:/usr/bin:.:~/bin
+/bin:/usr/bin:.:~/bin
+\~
+ok 1
+ok 2
+ok 3
+~root
+foo=bar:/usr/xyz
+foo=bar:~
diff --git a/tests/tilde.tests b/tests/tilde.tests
new file mode 100644
index 0000000..374f3e6
--- /dev/null
+++ b/tests/tilde.tests
@@ -0,0 +1,92 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+wdir=$PWD
+# this is needed because posix mode restricts tilde expansion to assignment
+# statements preceding a command, instead of the default of expanding all
+# assignment statements on the line (e.g., after `export').  Without this,
+# the next-to-last test fails
+set +o posix
+
+HOME=/usr/xyz
+SHELL=~/bash
+echo ~ch\et
+echo ~/"foo"
+echo "~chet"/"foo"
+echo \~chet/"foo"
+echo \~chet/bar
+echo ~\chet/bar
+echo ~chet""/bar
+echo ":~chet/"
+echo abcd~chet
+echo "SHELL=~/bash"
+echo $SHELL
+echo abcd:~chet
+path=/usr/ucb:/bin:~/bin:~/tmp/bin:/usr/bin
+echo $path
+
+cd /usr
+cd /tmp
+echo ~-
+echo ~+
+
+XPATH=/bin:/usr/bin:.
+
+# yes tilde expansion
+PPATH=$XPATH:~/bin
+echo "$PPATH"
+
+# no tilde expansion
+PPATH="$XPATH:~/bin"
+echo "$PPATH"
+
+# yes tilde expansion
+export PPATH=$XPATH:~/bin
+echo "$PPATH"
+declare -x PPATH=$XPATH:~/bin
+echo "$PPATH"
+
+# no tilde expansion
+export PPATH="$XPATH:~/bin"
+echo "$PPATH"
+declare -x PPATH="$XPATH:~/bin"
+echo "$PPATH"
+
+printf "%q\n" '~'
+
+# more tests of tilde expansion when executing case commands
+case ~ in
+$HOME)	echo ok 1;;
+*) echo bad 1 ;;
+esac
+
+case ~ in
+~)	echo ok 2 ;;
+\~)	echo bad 2a ;;
+*)	echo bad 2b ;;
+esac
+
+case $unset in
+"")	echo ok 3 ;;
+*)	echo bad 3 ;;
+esac
+
+USER=root		# should exist just about everywhere
+echo ~$USER
+
+cd "$wdir"
+
+echo foo=bar:~
+set -o posix; echo foo=bar:~
+
+exit 0
diff --git a/tests/tilde2.right b/tests/tilde2.right
new file mode 100644
index 0000000..fce0468
--- /dev/null
+++ b/tests/tilde2.right
@@ -0,0 +1,24 @@
+PATH=~/bin:/bin:/usr/bin:.
+/usr/xyz/bin:~/bin2:/bin:/usr/bin:.
+PATH=~/bin:~/bin2:/bin:/usr/bin:.
+~/bin
+~
+/usr/xyz
+~
+~
+~
+argv[1] = <\a>
+argv[1] = <\a>
+/usr/xyz/bash
+ok
+~
+~
+make -k FOO=/usr/xyz/mumble
+/usr/xyz/mumble
+HOME=~
+HOME=~
+/usr/$x/abc
+HOME=~
+/usr/$x/abc
+HOME=/usr/$x/abc
+/usr/$x/abc
diff --git a/tests/tilde2.tests b/tests/tilde2.tests
new file mode 100644
index 0000000..cc5dba9
--- /dev/null
+++ b/tests/tilde2.tests
@@ -0,0 +1,83 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+HOME=/usr/xyz
+XPATH=/bin:/usr/bin:.
+
+ADDPATH=PATH=~/bin:$XPATH
+
+echo $ADDPATH
+
+unset ADDPATH
+: ${ADDPATH:=~/bin:~/bin2:$XPATH}
+echo $ADDPATH
+
+unset ADDPATH
+: ${ADDPATH:=PATH=~/bin:~/bin2:$XPATH}
+echo $ADDPATH
+
+cat << !
+~/bin
+!
+
+echo "~"
+
+echo ${TPATH:-~}
+echo "${TPATH:-~}"
+echo "${TPATH:-"~"}"
+
+echo "${XPATH+~}"
+
+recho "\a"
+recho "${TPATH:-\a}"
+
+SHELL=~/bash
+echo $SHELL
+
+case $SHELL in
+~/bash)	echo ok;;
+*)	echo bad;;
+esac
+
+somevar=
+echo "${somevar:-~}"
+echo "${somevar:-"~"}"
+
+echo make -k FOO=~/mumble
+
+typeset FOO=~/mumble
+echo "$FOO"
+
+h=HOME=~
+echo $h
+
+export h=HOME=~
+echo $h
+
+x=1234
+HOME='/usr/$x/abc'
+
+echo ~
+
+# behavior differs here in posix mode
+set -o posix
+
+eval echo $h
+eval $h
+echo $HOME
+
+set +o posix
+
+eval echo $h
+eval $h
+echo $HOME
diff --git a/tests/trap.right b/tests/trap.right
new file mode 100644
index 0000000..4338ff4
--- /dev/null
+++ b/tests/trap.right
@@ -0,0 +1,115 @@
+subshell exit
+trap -- 'echo exiting' EXIT
+trap -- 'echo aborting' SIGHUP
+trap -- 'echo aborting' SIGINT
+trap -- 'echo aborting' SIGQUIT
+trap -- 'echo aborting' SIGABRT
+trap -- 'echo aborting' SIGTERM
+[33] debug
+debug line
+[35] debug
+trap -- 'echo exiting' EXIT
+trap -- 'echo aborting' SIGHUP
+trap -- 'echo aborting' SIGINT
+trap -- 'echo aborting' SIGQUIT
+trap -- 'echo aborting' SIGABRT
+trap -- 'echo aborting' SIGTERM
+trap -- 'echo [$LINENO] debug' DEBUG
+[37] debug
+func[29] funcdebug
+funcdebug line
+./trap.tests[39] funcdebug
+trap -- 'echo exiting' EXIT
+trap -- 'echo aborting' SIGHUP
+trap -- 'echo aborting' SIGINT
+trap -- 'echo aborting' SIGQUIT
+trap -- 'echo aborting' SIGABRT
+trap -- 'echo aborting' SIGTERM
+trap -- 'echo ${FUNCNAME:-$0}[$LINENO] funcdebug' DEBUG
+./trap.tests[41] funcdebug
+./trap.tests[46] debug
+./trap.tests[47] debug
+func2[43] debug
+func2[44] debug
+func2debug line
+./trap.tests[49] debug
+./trap.tests[51] debug
+trap -- 'echo exiting' EXIT
+trap -- 'echo aborting' SIGHUP
+trap -- 'echo aborting' SIGINT
+trap -- 'echo aborting' SIGQUIT
+trap -- 'echo aborting' SIGABRT
+trap -- 'echo aborting' SIGTERM
+trap -- '' DEBUG
+trap -- 'echo exiting' EXIT
+trap -- 'echo aborting' SIGHUP
+trap -- 'echo aborting' SIGINT
+trap -- 'echo aborting' SIGQUIT
+trap -- 'echo aborting' SIGABRT
+trap -- 'echo aborting' SIGTERM
+trap -- 'echo exiting' EXIT
+trap -- '' SIGINT
+trap -- 'echo aborting' SIGQUIT
+trap -- 'echo aborting' SIGABRT
+trap -- 'echo aborting' SIGTERM
+0
+trap -- '' SIGUSR2
+ERRTRAP
+ERRTRAP
+ERRTRAP
+after falses
+if negation ok
+after negation
+after while
+before false in trap2a.sub
+after false in trap2a.sub
+command substitution
+ERRTRAP
+ERRTRAP
+bar
+ERRTRAP
+ERRTRAP
+ERRTRAP
+ERRTRAP
+ERRTRAP
++[6] echo 1
+1
++[7] echo 2
+2
++[8] false
++[8] false
++[8] false
+++[8] echo trap: 8
+trap: 8
++[9] echo 4
+4
+exit subshell 1
+current shell
+exit subshell 2
+current shell
+current shell
+current shell
+outside 1
+outside 2
+outside 3
+outside 4
+sleep 2
+wait $!
+exit
+in trap EXIT
+sleep 2
+wait $!
+exit
+in trap EXIT
+fn
+after 1
+fn
+after 2
+caught a child death
+caught a child death
+caught a child death
+trap -- 'echo caught a child death' SIGCHLD
+trap -- 'echo exiting' EXIT
+trap -- 'echo aborting' SIGABRT
+trap -- 'echo caught a child death' SIGCHLD
+exiting
diff --git a/tests/trap.tests b/tests/trap.tests
new file mode 100644
index 0000000..4f808be
--- /dev/null
+++ b/tests/trap.tests
@@ -0,0 +1,114 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# test the trap code
+
+trap 'echo exiting' 0
+trap 'echo aborting' 1 2 3 6 15
+
+# make sure a user-specified subshell runs the exit trap, but does not
+# inherit the exit trap from a parent shell
+( trap 'echo subshell exit' 0; exit 0 )
+( exit 0 )
+
+trap
+
+func()
+{
+	trap 'echo ${FUNCNAME:-$0}[$LINENO] funcdebug' DEBUG
+	echo funcdebug line
+}
+
+trap 'echo [$LINENO] debug' DEBUG
+echo debug line
+
+trap
+
+func
+
+trap
+
+trap 'echo ${FUNCNAME:-$0}[$LINENO] debug' DEBUG
+func2()
+{
+	echo func2debug line
+}
+declare -ft func2
+func2
+
+unset -f func2
+
+trap '' DEBUG
+
+trap
+
+trap - debug
+
+trap
+
+trap - HUP
+trap hup
+trap '' INT
+trap '' int
+
+trap
+
+# exit 0 in exit trap should set exit status
+(
+set -e
+trap 'exit 0' EXIT
+false   
+echo bad
+)
+echo $?
+
+# hmmm...should this set the handling to SIG_IGN for children, too?
+trap '' USR2
+./trap1.sub
+trap - USR2
+
+# test ERR trap
+./trap2.sub
+
+${THIS_SH} ./trap3.sub
+
+${THIS_SH} ./trap4.sub
+
+# This doesn't work right on all Unix versions
+#${THIS_SH} ./trap5.sub
+
+# Return trap issues
+${THIS_SH} ./trap6.sub
+
+#
+# show that setting a trap on SIGCHLD is not disastrous.
+#
+set -o monitor
+
+trap 'echo caught a child death' SIGCHLD
+
+sleep 7 & sleep 6 & sleep 5 &
+
+# this will only catch the first, since there's a trap on SIGCHLD
+wait
+
+trap -p SIGCHLD
+
+# Now reset some of the signals the shell handles specially back to
+# their default values (with or without the SIG prefix)
+trap - SIGINT QUIT TERM
+
+trap
+
+trap - SIGCHLD
+wait
diff --git a/tests/trap1.sub b/tests/trap1.sub
new file mode 100755
index 0000000..48f8530
--- /dev/null
+++ b/tests/trap1.sub
@@ -0,0 +1,4 @@
+# signals ignored at shell startup cannot be trapped or reset
+trap 'echo USR2' USR2
+
+trap -p USR2
diff --git a/tests/trap2.sub b/tests/trap2.sub
new file mode 100755
index 0000000..bd9a76b
--- /dev/null
+++ b/tests/trap2.sub
@@ -0,0 +1,62 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+set +e
+trap 'echo ERRTRAP' ERR
+
+false
+false
+false
+
+echo after falses
+
+if ! false; then
+	echo if negation ok
+fi
+
+! false
+echo after negation 
+
+while false; do
+	echo while negation ok
+done
+
+echo after while
+
+./trap2a.sub
+
+echo $(false ; echo command substitution)
+
+# test behavior of failed commands following `command' builtin
+command false
+
+(command false)
+command false | echo bar
+
+(false)
+
+exit 42 | command false
+
+command command command false
+
+unset FALSE
+if [ -x /bin/false ]; then
+        FALSE=/bin/false
+elif [ -x /usr/bin/false ]; then
+        FALSE=/usr/bin/false
+else
+        FALSE='command false'
+fi
+
+command $FALSE
+command command command $FALSE
diff --git a/tests/trap2a.sub b/tests/trap2a.sub
new file mode 100755
index 0000000..44d6b50
--- /dev/null
+++ b/tests/trap2a.sub
@@ -0,0 +1,3 @@
+echo before false in trap2a.sub
+false
+echo after false in trap2a.sub
diff --git a/tests/trap3.sub b/tests/trap3.sub
new file mode 100644
index 0000000..1490a76
--- /dev/null
+++ b/tests/trap3.sub
@@ -0,0 +1,9 @@
+PS4='+[$LINENO] '
+trap 'echo trap: $LINENO' ERR
+
+set -x
+
+echo 1
+echo 2
+false | false | false
+echo 4
diff --git a/tests/trap4.sub b/tests/trap4.sub
new file mode 100644
index 0000000..c84b54e
--- /dev/null
+++ b/tests/trap4.sub
@@ -0,0 +1,55 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# make sure subshells at the end of pipelines run any exit traps they set
+
+: | { trap 'echo exit subshell 1' EXIT; exit; }; echo current shell
+
+: | { trap 'echo exit subshell 2' EXIT; exit; }; echo current shell
+
+: | { trap 'echo exit subshell 3' EXIT; exit; } | : ; echo current shell
+
+: | { trap 'echo exit subshell 4' EXIT; exit; } | : ; echo current shell
+
+trap 'echo inherited exit trap' EXIT
+: | { exit; } ; echo outside 1
+: | ( exit; ) ; echo outside 2
+: | { exit; } | : ; echo outside 3
+: | ( exit; ) | : ; echo outside 4
+
+trap - EXIT
+
+# make sure group commands that are not at the beginning or end of pipelines
+# run an EXIT trap, with and without the exit builtin
+echo ignored |
+{
+    trap 'echo "in trap EXIT">&2' EXIT
+    sleep 4 &
+    echo 'sleep 2'>&2
+    sleep 2
+    echo 'wait $!'>&2
+    wait $!
+    echo 'exit'>&2
+    exit
+} | cat
+
+echo ignored |
+{
+    trap 'echo "in trap EXIT">&2' EXIT
+    sleep 4 &
+    echo 'sleep 2'>&2
+    sleep 2
+    echo 'wait $!'>&2
+    wait $!
+    echo 'exit'>&2
+} | cat
diff --git a/tests/trap5.sub b/tests/trap5.sub
new file mode 100644
index 0000000..826b794
--- /dev/null
+++ b/tests/trap5.sub
@@ -0,0 +1,31 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# make sure process substitution runs the exit trap
+[[ -n $(< <(trap "cat /dev/fd/0" EXIT)) ]] <<<works && echo works || echo "fail :("
+
+read foo < <(trap "echo bar" EXIT)
+echo $foo
+
+cat <(trap "echo bar" EXIT)
+
+trap "echo bar" EXIT	#should proc subst inherit this?
+cat <(echo foo ; exit 0;)
+
+trap - 0
+trap
+
+cat <(echo foo; trap "echo bar" EXIT)
+
+trap "echo bar" EXIT	#should proc subst inherit this?
+cat <(echo foo)
diff --git a/tests/trap6.sub b/tests/trap6.sub
new file mode 100644
index 0000000..7268558
--- /dev/null
+++ b/tests/trap6.sub
@@ -0,0 +1,28 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+set -o functrace
+fn() { return; }
+
+trap "echo fn ; fn" RETURN
+
+fn
+echo after 1
+
+unset -f fn
+
+fn() { eval return; }
+fn
+echo after 2
+
+unset -f fn
diff --git a/tests/type.right b/tests/type.right
new file mode 100644
index 0000000..f876715
--- /dev/null
+++ b/tests/type.right
@@ -0,0 +1,135 @@
+./type.tests: line 22: type: -r: invalid option
+type: usage: type [-afptP] name [name ...]
+./type.tests: line 25: type: notthere: not found
+function
+keyword
+builtin
+file
+file
+file
+func is a function
+func () 
+{ 
+    echo this is func
+}
+while is a shell keyword
+while is a shell keyword
+builtin is a shell builtin
+/bin/sh is /bin/sh
+func
+func is a function
+func () 
+{ 
+    echo this is func
+}
+while
+while is a shell keyword
+./type.tests: line 56: type: m: not found
+alias m='more'
+alias m='more'
+m is aliased to `more'
+alias
+alias m='more'
+alias m='more'
+alias m='more'
+m is aliased to `more'
+builtin
+builtin is a shell builtin
+/bin/sh
+/bin/sh is /bin/sh
+./type.tests: line 78: type: func: not found
+./type.tests: line 80: type: m: not found
+/bin/sh
+/tmp/bash
+bash is hashed (/tmp/bash)
+file
+hits	command
+   1	/bin/sh
+   3	/tmp/bash
+f is a function
+f () 
+{ 
+    v='^A'
+}
+foo is a function
+foo () 
+{ 
+    echo $(<x1)
+}
+bar is a function
+bar () 
+{ 
+    echo $(<x1)
+}
+foo is a function
+foo () 
+{ 
+    echo;
+    cat <<END
+bar
+END
+
+    cat <<EOF
+qux
+EOF
+
+}
+
+bar
+qux
+
+bar
+qux
+foo is a function
+foo () 
+{ 
+    rm -f a b c;
+    for f in a b c;
+    do
+        cat <<-EOF >> ${f}
+file
+EOF
+
+    done
+    grep . a b c
+}
+a:file
+b:file
+c:file
+bb is a function
+bb () 
+{ 
+    ( cat <<EOF
+foo
+bar
+EOF
+ )
+    echo after subshell
+}
+mkcoprocs is a function
+mkcoprocs () 
+{ 
+    coproc a { 
+        cat <<EOF1
+producer 1
+EOF1
+
+    }
+    coproc b { 
+        cat <<EOF2
+producer 2
+EOF2
+
+    }
+    echo "coprocs created"
+}
+mkcoprocs is a function
+mkcoprocs () 
+{ 
+    coproc COPROC ( b cat <<EOF
+heredoc
+body
+EOF
+ )
+    echo "coprocs created"
+}
diff --git a/tests/type.tests b/tests/type.tests
new file mode 100644
index 0000000..fd39c18
--- /dev/null
+++ b/tests/type.tests
@@ -0,0 +1,110 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+set +o posix
+
+hash -r
+unalias -a
+
+# this should echo nothing
+type
+# this should be a usage error
+type -r ${THIS_SH}
+
+# these should behave identically
+type notthere
+command -v notthere
+
+alias m=more
+
+unset -f func 2>/dev/null
+func() { echo this is func; }
+
+type -t func
+type -t while
+type -t builtin
+type -t /bin/sh
+type -t ${THIS_SH}
+type -t mv
+
+type func
+# the following two should produce identical output
+type while
+type -a while
+type builtin
+type /bin/sh
+
+command -v func
+command -V func
+command -v while
+command -V while
+
+# the following two lines should produce the same output
+# post-3.0 patch makes command -v silent, as posix specifies
+# first test with alias expansion off (should all fail or produce no output)
+type -t m
+type m
+command -v m
+alias -p
+alias m
+
+# then test with alias expansion on 
+shopt -s expand_aliases
+type m
+type -t m
+command -v m
+alias -p
+alias m
+
+command -V m
+shopt -u expand_aliases
+
+command -v builtin
+command -V builtin
+command -v /bin/sh
+command -V /bin/sh
+
+unset -f func
+type func
+unalias m
+type m
+
+hash -r
+
+hash -p /bin/sh sh
+type -p sh
+
+SHBASE=${THIS_SH##*/}
+hash -p /tmp/$SHBASE $SHBASE
+type -p $SHBASE
+type $SHBASE
+
+type -t $SHBASE
+
+# make sure the hash table looks right
+hash
+
+# bug in versions of bash up to and including bash-3.2
+f() {
+        v=$'\001'
+    }
+
+type f | cat -v
+
+${THIS_SH} type1.sub
+
+${THIS_SH} type2.sub
+
+${THIS_SH} type3.sub
+
+${THIS_SH} type4.sub
diff --git a/tests/type1.sub b/tests/type1.sub
new file mode 100644
index 0000000..95f96ae
--- /dev/null
+++ b/tests/type1.sub
@@ -0,0 +1,10 @@
+foo()
+{
+	echo $(<x1)
+}
+
+type foo
+
+eval "$(declare -f foo | sed 's:foo:bar:')"
+
+type bar
diff --git a/tests/type2.sub b/tests/type2.sub
new file mode 100644
index 0000000..34977c5
--- /dev/null
+++ b/tests/type2.sub
@@ -0,0 +1,29 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+foo()
+{
+	echo
+	cat <<END
+bar
+END
+	cat <<EOF
+qux
+EOF
+}
+
+type foo
+foo
+
+eval "$(type foo | sed 1d)"
+foo
diff --git a/tests/type3.sub b/tests/type3.sub
new file mode 100644
index 0000000..1a95de3
--- /dev/null
+++ b/tests/type3.sub
@@ -0,0 +1,34 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+cd ${TMPDIR:-/tmp}
+
+foo() {
+	rm -f a b c
+	for f in a b c; do
+		cat <<-EOF >> ${f}
+		file
+		EOF
+	done
+	grep . a b c
+}
+
+type foo
+
+eval "$(type foo | sed 1d)"
+foo
+
+rm -f a b c
+
+cd $OLDPWD
+exit 0
diff --git a/tests/type4.sub b/tests/type4.sub
new file mode 100644
index 0000000..937f998
--- /dev/null
+++ b/tests/type4.sub
@@ -0,0 +1,56 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+bb()
+{
+	(
+	cat << EOF
+foo
+bar
+EOF
+	)
+	echo after subshell
+}
+
+type bb
+
+
+mkcoprocs()
+{
+	coproc a { cat <<EOF1
+producer 1
+EOF1
+}
+coproc b { cat << EOF2
+producer 2
+EOF2
+}
+
+echo "coprocs created"
+}
+
+type mkcoprocs
+
+unset -f mkcoprocs
+
+mkcoprocs()
+{
+	coproc ( b cat << EOF
+heredoc
+body
+EOF
+	)
+echo "coprocs created"
+}
+
+type mkcoprocs
diff --git a/tests/unicode1.sub b/tests/unicode1.sub
new file mode 100644
index 0000000..fc74285
--- /dev/null
+++ b/tests/unicode1.sub
@@ -0,0 +1,596 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+unset LC_ALL
+
+ErrorCnt=0
+TestCnt=0
+
+  function check_valid_var_name {
+    case "${1:?Missing Variable Name}" in
+      [!a-zA-Z_]* | *[!a-zA-Z_0-9]* ) return 3;;
+    esac
+  }
+  # get_array_element VariableName ArrayName ArrayElement
+  function get_array_element {
+    check_valid_var_name "${1:?Missing Variable Name}" || return $?
+    check_valid_var_name "${2:?Missing Array Name}" || return $?
+    eval "${1}"'="${'"${2}"'["${3:?Missing Array Index}"]}"'
+  }
+  # unset_array_element VarName ArrayName
+  function get_array_element_cnt {
+    check_valid_var_name "${1:?Missing Variable Name}" || return $?
+    check_valid_var_name "${2:?Missing Array Name}" || return $?
+    eval "${1}"'="${#'"${2}"'[@]}"'
+  }
+
+
+function TestCodePage {
+    local TargetCharset="${1:?Missing Test charset}"
+    local EChar RChar TCnt
+    get_array_element_cnt TCnt "${2:?Missing Array Name}"
+    for (( x=1 ; x<${TCnt} ; x++ )); do
+      get_array_element EChar "${2}"  ${x}
+      if [ -n "${EChar}" ]; then
+	let TestCnt+=1
+	printf -v UVal '\\U%08x' "${x}"
+	LC_CTYPE=${TargetCharset} printf -v RChar "${UVal}" 2>/dev/null
+	if [ "${EChar}" != "${RChar}" ]; then
+	  let ErrorCnt+=1
+	  printf "${TargetCharset}: Error Encoding U+%08X to ${TL} [ \"%q\" != \"%q\" ]\n" "${x}" "${EChar}" "${RChar}"
+	fi
+      fi
+    done
+}
+
+
+#for ((x=1;x<255;x++)); do printf ' [0x%04x]=$'\''\%03o'\' $x $x ; [ $(($x%5)) = 0 ] && echo; done
+fr_FR_ISO_8859_1=(
+ [0x0001]=$'\001' [0x0002]=$'\002' [0x0003]=$'\003' [0x0004]=$'\004' [0x0005]=$'\005'
+ [0x0006]=$'\006' [0x0007]=$'\007' [0x0008]=$'\010' [0x0009]=$'\011' [0x000a]=$'\012'
+ [0x000b]=$'\013' [0x000c]=$'\014' [0x000d]=$'\015' [0x000e]=$'\016' [0x000f]=$'\017'
+ [0x0010]=$'\020' [0x0011]=$'\021' [0x0012]=$'\022' [0x0013]=$'\023' [0x0014]=$'\024'
+ [0x0015]=$'\025' [0x0016]=$'\026' [0x0017]=$'\027' [0x0018]=$'\030' [0x0019]=$'\031'
+ [0x001a]=$'\032' [0x001b]=$'\033' [0x001c]=$'\034' [0x001d]=$'\035' [0x001e]=$'\036'
+ [0x001f]=$'\037' [0x0020]=$'\040' [0x0021]=$'\041' [0x0022]=$'\042' [0x0023]=$'\043'
+ [0x0024]=$'\044' [0x0025]=$'\045' [0x0026]=$'\046' [0x0027]=$'\047' [0x0028]=$'\050'
+ [0x0029]=$'\051' [0x002a]=$'\052' [0x002b]=$'\053' [0x002c]=$'\054' [0x002d]=$'\055'
+ [0x002e]=$'\056' [0x002f]=$'\057' [0x0030]=$'\060' [0x0031]=$'\061' [0x0032]=$'\062'
+ [0x0033]=$'\063' [0x0034]=$'\064' [0x0035]=$'\065' [0x0036]=$'\066' [0x0037]=$'\067'
+ [0x0038]=$'\070' [0x0039]=$'\071' [0x003a]=$'\072' [0x003b]=$'\073' [0x003c]=$'\074'
+ [0x003d]=$'\075' [0x003e]=$'\076' [0x003f]=$'\077' [0x0040]=$'\100' [0x0041]=$'\101'
+ [0x0042]=$'\102' [0x0043]=$'\103' [0x0044]=$'\104' [0x0045]=$'\105' [0x0046]=$'\106'
+ [0x0047]=$'\107' [0x0048]=$'\110' [0x0049]=$'\111' [0x004a]=$'\112' [0x004b]=$'\113'
+ [0x004c]=$'\114' [0x004d]=$'\115' [0x004e]=$'\116' [0x004f]=$'\117' [0x0050]=$'\120'
+ [0x0051]=$'\121' [0x0052]=$'\122' [0x0053]=$'\123' [0x0054]=$'\124' [0x0055]=$'\125'
+ [0x0056]=$'\126' [0x0057]=$'\127' [0x0058]=$'\130' [0x0059]=$'\131' [0x005a]=$'\132'
+ [0x005b]=$'\133' [0x005c]=$'\134' [0x005d]=$'\135' [0x005e]=$'\136' [0x005f]=$'\137'
+ [0x0060]=$'\140' [0x0061]=$'\141' [0x0062]=$'\142' [0x0063]=$'\143' [0x0064]=$'\144'
+ [0x0065]=$'\145' [0x0066]=$'\146' [0x0067]=$'\147' [0x0068]=$'\150' [0x0069]=$'\151'
+ [0x006a]=$'\152' [0x006b]=$'\153' [0x006c]=$'\154' [0x006d]=$'\155' [0x006e]=$'\156'
+ [0x006f]=$'\157' [0x0070]=$'\160' [0x0071]=$'\161' [0x0072]=$'\162' [0x0073]=$'\163'
+ [0x0074]=$'\164' [0x0075]=$'\165' [0x0076]=$'\166' [0x0077]=$'\167' [0x0078]=$'\170'
+ [0x0079]=$'\171' [0x007a]=$'\172' [0x007b]=$'\173' [0x007c]=$'\174' [0x007d]=$'\175'
+ [0x007e]=$'\176' [0x007f]=$'\177' [0x0080]=$'\200' [0x0081]=$'\201' [0x0082]=$'\202'
+ [0x0083]=$'\203' [0x0084]=$'\204' [0x0085]=$'\205' [0x0086]=$'\206' [0x0087]=$'\207'
+ [0x0088]=$'\210' [0x0089]=$'\211' [0x008a]=$'\212' [0x008b]=$'\213' [0x008c]=$'\214'
+ [0x008d]=$'\215' [0x008e]=$'\216' [0x008f]=$'\217' [0x0090]=$'\220' [0x0091]=$'\221'
+ [0x0092]=$'\222' [0x0093]=$'\223' [0x0094]=$'\224' [0x0095]=$'\225' [0x0096]=$'\226'
+ [0x0097]=$'\227' [0x0098]=$'\230' [0x0099]=$'\231' [0x009a]=$'\232' [0x009b]=$'\233'
+ [0x009c]=$'\234' [0x009d]=$'\235' [0x009e]=$'\236' [0x009f]=$'\237' [0x00a0]=$'\240'
+ [0x00a1]=$'\241' [0x00a2]=$'\242' [0x00a3]=$'\243' [0x00a4]=$'\244' [0x00a5]=$'\245'
+ [0x00a6]=$'\246' [0x00a7]=$'\247' [0x00a8]=$'\250' [0x00a9]=$'\251' [0x00aa]=$'\252'
+ [0x00ab]=$'\253' [0x00ac]=$'\254' [0x00ad]=$'\255' [0x00ae]=$'\256' [0x00af]=$'\257'
+ [0x00b0]=$'\260' [0x00b1]=$'\261' [0x00b2]=$'\262' [0x00b3]=$'\263' [0x00b4]=$'\264'
+ [0x00b5]=$'\265' [0x00b6]=$'\266' [0x00b7]=$'\267' [0x00b8]=$'\270' [0x00b9]=$'\271'
+ [0x00ba]=$'\272' [0x00bb]=$'\273' [0x00bc]=$'\274' [0x00bd]=$'\275' [0x00be]=$'\276'
+ [0x00bf]=$'\277' [0x00c0]=$'\300' [0x00c1]=$'\301' [0x00c2]=$'\302' [0x00c3]=$'\303'
+ [0x00c4]=$'\304' [0x00c5]=$'\305' [0x00c6]=$'\306' [0x00c7]=$'\307' [0x00c8]=$'\310'
+ [0x00c9]=$'\311' [0x00ca]=$'\312' [0x00cb]=$'\313' [0x00cc]=$'\314' [0x00cd]=$'\315'
+ [0x00ce]=$'\316' [0x00cf]=$'\317' [0x00d0]=$'\320' [0x00d1]=$'\321' [0x00d2]=$'\322'
+ [0x00d3]=$'\323' [0x00d4]=$'\324' [0x00d5]=$'\325' [0x00d6]=$'\326' [0x00d7]=$'\327'
+ [0x00d8]=$'\330' [0x00d9]=$'\331' [0x00da]=$'\332' [0x00db]=$'\333' [0x00dc]=$'\334'
+ [0x00dd]=$'\335' [0x00de]=$'\336' [0x00df]=$'\337' [0x00e0]=$'\340' [0x00e1]=$'\341'
+ [0x00e2]=$'\342' [0x00e3]=$'\343' [0x00e4]=$'\344' [0x00e5]=$'\345' [0x00e6]=$'\346'
+ [0x00e7]=$'\347' [0x00e8]=$'\350' [0x00e9]=$'\351' [0x00ea]=$'\352' [0x00eb]=$'\353'
+ [0x00ec]=$'\354' [0x00ed]=$'\355' [0x00ee]=$'\356' [0x00ef]=$'\357' [0x00f0]=$'\360'
+ [0x00f1]=$'\361' [0x00f2]=$'\362' [0x00f3]=$'\363' [0x00f4]=$'\364' [0x00f5]=$'\365'
+ [0x00f6]=$'\366' [0x00f7]=$'\367' [0x00f8]=$'\370' [0x00f9]=$'\371' [0x00fa]=$'\372'
+ [0x00fb]=$'\373' [0x00fc]=$'\374' [0x00fd]=$'\375' [0x00fe]=$'\376'	
+)
+
+TestCodePage fr_FR.ISO8859-1 fr_FR_ISO_8859_1
+
+zh_TW_BIG5=(
+ [0x00f6]=$'\366' [0x00f7]=$'\367' [0x00f8]=$'\370' [0x00f9]=$'\371' [0x00fa]=$'\372'
+ [0x00fb]=$'\373' [0x00fc]=$'\374' [0x00fd]=$'\375' [0x00fe]=$'\376'	
+)
+TestCodePage zh_TW.BIG5 zh_TW_BIG5
+
+jp_JP_SHIFT_JIS=(
+  [0x0001]=$'\x01' #  START OF HEADING
+  [0x0002]=$'\x02' #  START OF TEXT
+  [0x0003]=$'\x03' #  END OF TEXT
+  [0x0004]=$'\x04' #  END OF TRANSMISSION
+  [0x0005]=$'\x05' #  ENQUIRY
+  [0x0006]=$'\x06' #  ACKNOWLEDGE
+  [0x0007]=$'\x07' #  BELL
+  [0x0008]=$'\x08' #  BACKSPACE
+  [0x0009]=$'\x09' #  HORIZONTAL TABULATION
+  [0x000A]=$'\x0A' #  LINE FEED
+  [0x000B]=$'\x0B' #  VERTICAL TABULATION
+  [0x000C]=$'\x0C' #  FORM FEED
+  [0x000D]=$'\x0D' #  CARRIAGE RETURN
+  [0x000E]=$'\x0E' #  SHIFT OUT
+  [0x000F]=$'\x0F' #  SHIFT IN
+  [0x0010]=$'\x10' #  DATA LINK ESCAPE
+  [0x0011]=$'\x11' #  DEVICE CONTROL ONE
+  [0x0012]=$'\x12' #  DEVICE CONTROL TWO
+  [0x0013]=$'\x13' #  DEVICE CONTROL THREE
+  [0x0014]=$'\x14' #  DEVICE CONTROL FOUR
+  [0x0015]=$'\x15' #  NEGATIVE ACKNOWLEDGE
+  [0x0016]=$'\x16' #  SYNCHRONOUS IDLE
+  [0x0017]=$'\x17' #  END OF TRANSMISSION BLOCK
+  [0x0018]=$'\x18' #  CANCEL
+  [0x0019]=$'\x19' #  END OF MEDIUM
+  [0x001A]=$'\x1A' #  SUBSTITUTE
+  [0x001B]=$'\x1B' #  ESCAPE
+  [0x001C]=$'\x1C' #  FILE SEPARATOR
+  [0x001D]=$'\x1D' #  GROUP SEPARATOR
+  [0x001E]=$'\x1E' #  RECORD SEPARATOR
+  [0x001F]=$'\x1F' #  UNIT SEPARATOR
+  [0x0020]=$'\x20' #  SPACE
+  [0x0021]=$'\x21' #  EXCLAMATION MARK
+  [0x0022]=$'\x22' #  QUOTATION MARK
+  [0x0023]=$'\x23' #  NUMBER SIGN
+  [0x0024]=$'\x24' #  DOLLAR SIGN
+  [0x0025]=$'\x25' #  PERCENT SIGN
+  [0x0026]=$'\x26' #  AMPERSAND
+  [0x0027]=$'\x27' #  APOSTROPHE
+  [0x0028]=$'\x28' #  LEFT PARENTHESIS
+  [0x0029]=$'\x29' #  RIGHT PARENTHESIS
+  [0x002A]=$'\x2A' #  ASTERISK
+  [0x002B]=$'\x2B' #  PLUS SIGN
+  [0x002C]=$'\x2C' #  COMMA
+  [0x002D]=$'\x2D' #  HYPHEN-MINUS
+  [0x002E]=$'\x2E' #  FULL STOP
+  [0x002F]=$'\x2F' #  SOLIDUS
+  [0x0030]=$'\x30' #  DIGIT ZERO
+  [0x0031]=$'\x31' #  DIGIT ONE
+  [0x0032]=$'\x32' #  DIGIT TWO
+  [0x0033]=$'\x33' #  DIGIT THREE
+  [0x0034]=$'\x34' #  DIGIT FOUR
+  [0x0035]=$'\x35' #  DIGIT FIVE
+  [0x0036]=$'\x36' #  DIGIT SIX
+  [0x0037]=$'\x37' #  DIGIT SEVEN
+  [0x0038]=$'\x38' #  DIGIT EIGHT
+  [0x0039]=$'\x39' #  DIGIT NINE
+  [0x003A]=$'\x3A' #  COLON
+  [0x003B]=$'\x3B' #  SEMICOLON
+  [0x003C]=$'\x3C' #  LESS-THAN SIGN
+  [0x003D]=$'\x3D' #  EQUALS SIGN
+  [0x003E]=$'\x3E' #  GREATER-THAN SIGN
+  [0x003F]=$'\x3F' #  QUESTION MARK
+  [0x0040]=$'\x40' #  COMMERCIAL AT
+  [0x0041]=$'\x41' #  LATIN CAPITAL LETTER A
+  [0x0042]=$'\x42' #  LATIN CAPITAL LETTER B
+  [0x0043]=$'\x43' #  LATIN CAPITAL LETTER C
+  [0x0044]=$'\x44' #  LATIN CAPITAL LETTER D
+  [0x0045]=$'\x45' #  LATIN CAPITAL LETTER E
+  [0x0046]=$'\x46' #  LATIN CAPITAL LETTER F
+  [0x0047]=$'\x47' #  LATIN CAPITAL LETTER G
+  [0x0048]=$'\x48' #  LATIN CAPITAL LETTER H
+  [0x0049]=$'\x49' #  LATIN CAPITAL LETTER I
+  [0x004A]=$'\x4A' #  LATIN CAPITAL LETTER J
+  [0x004B]=$'\x4B' #  LATIN CAPITAL LETTER K
+  [0x004C]=$'\x4C' #  LATIN CAPITAL LETTER L
+  [0x004D]=$'\x4D' #  LATIN CAPITAL LETTER M
+  [0x004E]=$'\x4E' #  LATIN CAPITAL LETTER N
+  [0x004F]=$'\x4F' #  LATIN CAPITAL LETTER O
+  [0x0050]=$'\x50' #  LATIN CAPITAL LETTER P
+  [0x0051]=$'\x51' #  LATIN CAPITAL LETTER Q
+  [0x0052]=$'\x52' #  LATIN CAPITAL LETTER R
+  [0x0053]=$'\x53' #  LATIN CAPITAL LETTER S
+  [0x0054]=$'\x54' #  LATIN CAPITAL LETTER T
+  [0x0055]=$'\x55' #  LATIN CAPITAL LETTER U
+  [0x0056]=$'\x56' #  LATIN CAPITAL LETTER V
+  [0x0057]=$'\x57' #  LATIN CAPITAL LETTER W
+  [0x0058]=$'\x58' #  LATIN CAPITAL LETTER X
+  [0x0059]=$'\x59' #  LATIN CAPITAL LETTER Y
+  [0x005A]=$'\x5A' #  LATIN CAPITAL LETTER Z
+  [0x005B]=$'\x5B' #  LEFT SQUARE BRACKET
+  [0x005C]=$'\x5C' #  REVERSE SOLIDUS (YEN SIGN)
+  [0x005D]=$'\x5D' #  RIGHT SQUARE BRACKET
+  [0x005E]=$'\x5E' #  CIRCUMFLEX ACCENT
+  [0x005F]=$'\x5F' #  LOW LINE
+  [0x0060]=$'\x60' #  GRAVE ACCENT
+  [0x0061]=$'\x61' #  LATIN SMALL LETTER A
+  [0x0062]=$'\x62' #  LATIN SMALL LETTER B
+  [0x0063]=$'\x63' #  LATIN SMALL LETTER C
+  [0x0064]=$'\x64' #  LATIN SMALL LETTER D
+  [0x0065]=$'\x65' #  LATIN SMALL LETTER E
+  [0x0066]=$'\x66' #  LATIN SMALL LETTER F
+  [0x0067]=$'\x67' #  LATIN SMALL LETTER G
+  [0x0068]=$'\x68' #  LATIN SMALL LETTER H
+  [0x0069]=$'\x69' #  LATIN SMALL LETTER I
+  [0x006A]=$'\x6A' #  LATIN SMALL LETTER J
+  [0x006B]=$'\x6B' #  LATIN SMALL LETTER K
+  [0x006C]=$'\x6C' #  LATIN SMALL LETTER L
+  [0x006D]=$'\x6D' #  LATIN SMALL LETTER M
+  [0x006E]=$'\x6E' #  LATIN SMALL LETTER N
+  [0x006F]=$'\x6F' #  LATIN SMALL LETTER O
+  [0x0070]=$'\x70' #  LATIN SMALL LETTER P
+  [0x0071]=$'\x71' #  LATIN SMALL LETTER Q
+  [0x0072]=$'\x72' #  LATIN SMALL LETTER R
+  [0x0073]=$'\x73' #  LATIN SMALL LETTER S
+  [0x0074]=$'\x74' #  LATIN SMALL LETTER T
+  [0x0075]=$'\x75' #  LATIN SMALL LETTER U
+  [0x0076]=$'\x76' #  LATIN SMALL LETTER V
+  [0x0077]=$'\x77' #  LATIN SMALL LETTER W
+  [0x0078]=$'\x78' #  LATIN SMALL LETTER X
+  [0x0079]=$'\x79' #  LATIN SMALL LETTER Y
+  [0x007A]=$'\x7A' #  LATIN SMALL LETTER Z
+  [0x007B]=$'\x7B' #  LEFT CURLY BRACKET
+  [0x007C]=$'\x7C' #  VERTICAL LINE
+  [0x007D]=$'\x7D' #  RIGHT CURLY BRACKET
+  [0x007E]=$'\x7E' #  TILDE
+  [0x007F]=$'\x7F' #  DELETE
+  [0xFF61]=$'\xA1' #  HALFWIDTH IDEOGRAPHIC FULL STOP
+  [0xFF62]=$'\xA2' #  HALFWIDTH LEFT CORNER BRACKET
+  [0xFF63]=$'\xA3' #  HALFWIDTH RIGHT CORNER BRACKET
+  [0xFF64]=$'\xA4' #  HALFWIDTH IDEOGRAPHIC COMMA
+  [0xFF65]=$'\xA5' #  HALFWIDTH KATAKANA MIDDLE DOT
+  [0xFF66]=$'\xA6' #  HALFWIDTH KATAKANA LETTER WO
+  [0xFF67]=$'\xA7' #  HALFWIDTH KATAKANA LETTER SMALL A
+  [0xFF68]=$'\xA8' #  HALFWIDTH KATAKANA LETTER SMALL I
+  [0xFF69]=$'\xA9' #  HALFWIDTH KATAKANA LETTER SMALL U
+  [0xFF6A]=$'\xAA' #  HALFWIDTH KATAKANA LETTER SMALL E
+  [0xFF6B]=$'\xAB' #  HALFWIDTH KATAKANA LETTER SMALL O
+  [0xFF6C]=$'\xAC' #  HALFWIDTH KATAKANA LETTER SMALL YA
+  [0xFF6D]=$'\xAD' #  HALFWIDTH KATAKANA LETTER SMALL YU
+  [0xFF6E]=$'\xAE' #  HALFWIDTH KATAKANA LETTER SMALL YO
+  [0xFF6F]=$'\xAF' #  HALFWIDTH KATAKANA LETTER SMALL TU
+  [0xFF70]=$'\xB0' #  HALFWIDTH KATAKANA-HIRAGANA PROLONGED SOUND MARK
+  [0xFF71]=$'\xB1' #  HALFWIDTH KATAKANA LETTER A
+  [0xFF72]=$'\xB2' #  HALFWIDTH KATAKANA LETTER I
+  [0xFF73]=$'\xB3' #  HALFWIDTH KATAKANA LETTER U
+  [0xFF74]=$'\xB4' #  HALFWIDTH KATAKANA LETTER E
+  [0xFF75]=$'\xB5' #  HALFWIDTH KATAKANA LETTER O
+  [0xFF76]=$'\xB6' #  HALFWIDTH KATAKANA LETTER KA
+  [0xFF77]=$'\xB7' #  HALFWIDTH KATAKANA LETTER KI
+  [0xFF78]=$'\xB8' #  HALFWIDTH KATAKANA LETTER KU
+  [0xFF79]=$'\xB9' #  HALFWIDTH KATAKANA LETTER KE
+  [0xFF7A]=$'\xBA' #  HALFWIDTH KATAKANA LETTER KO
+  [0xFF7B]=$'\xBB' #  HALFWIDTH KATAKANA LETTER SA
+  [0xFF7C]=$'\xBC' #  HALFWIDTH KATAKANA LETTER SI
+  [0xFF7D]=$'\xBD' #  HALFWIDTH KATAKANA LETTER SU
+  [0xFF7E]=$'\xBE' #  HALFWIDTH KATAKANA LETTER SE
+  [0xFF7F]=$'\xBF' #  HALFWIDTH KATAKANA LETTER SO
+  [0xFF80]=$'\xC0' #  HALFWIDTH KATAKANA LETTER TA
+  [0xFF81]=$'\xC1' #  HALFWIDTH KATAKANA LETTER TI
+  [0xFF82]=$'\xC2' #  HALFWIDTH KATAKANA LETTER TU
+  [0xFF83]=$'\xC3' #  HALFWIDTH KATAKANA LETTER TE
+  [0xFF84]=$'\xC4' #  HALFWIDTH KATAKANA LETTER TO
+  [0xFF85]=$'\xC5' #  HALFWIDTH KATAKANA LETTER NA
+  [0xFF86]=$'\xC6' #  HALFWIDTH KATAKANA LETTER NI
+  [0xFF87]=$'\xC7' #  HALFWIDTH KATAKANA LETTER NU
+  [0xFF88]=$'\xC8' #  HALFWIDTH KATAKANA LETTER NE
+  [0xFF89]=$'\xC9' #  HALFWIDTH KATAKANA LETTER NO
+  [0xFF8A]=$'\xCA' #  HALFWIDTH KATAKANA LETTER HA
+  [0xFF8B]=$'\xCB' #  HALFWIDTH KATAKANA LETTER HI
+  [0xFF8C]=$'\xCC' #  HALFWIDTH KATAKANA LETTER HU
+  [0xFF8D]=$'\xCD' #  HALFWIDTH KATAKANA LETTER HE
+  [0xFF8E]=$'\xCE' #  HALFWIDTH KATAKANA LETTER HO
+  [0xFF8F]=$'\xCF' #  HALFWIDTH KATAKANA LETTER MA
+  [0xFF90]=$'\xD0' #  HALFWIDTH KATAKANA LETTER MI
+  [0xFF91]=$'\xD1' #  HALFWIDTH KATAKANA LETTER MU
+  [0xFF92]=$'\xD2' #  HALFWIDTH KATAKANA LETTER ME
+  [0xFF93]=$'\xD3' #  HALFWIDTH KATAKANA LETTER MO
+  [0xFF94]=$'\xD4' #  HALFWIDTH KATAKANA LETTER YA
+  [0xFF95]=$'\xD5' #  HALFWIDTH KATAKANA LETTER YU
+  [0xFF96]=$'\xD6' #  HALFWIDTH KATAKANA LETTER YO
+  [0xFF97]=$'\xD7' #  HALFWIDTH KATAKANA LETTER RA
+  [0xFF98]=$'\xD8' #  HALFWIDTH KATAKANA LETTER RI
+  [0xFF99]=$'\xD9' #  HALFWIDTH KATAKANA LETTER RU
+  [0xFF9A]=$'\xDA' #  HALFWIDTH KATAKANA LETTER RE
+  [0xFF9B]=$'\xDB' #  HALFWIDTH KATAKANA LETTER RO
+  [0xFF9C]=$'\xDC' #  HALFWIDTH KATAKANA LETTER WA
+  [0xFF9D]=$'\xDD' #  HALFWIDTH KATAKANA LETTER N
+  [0xFF9E]=$'\xDE' #  HALFWIDTH KATAKANA VOICED SOUND MARK
+  [0xFF9F]=$'\xDF' #  HALFWIDTH KATAKANA SEMI-VOICED SOUND MARK
+)
+#TestCodePage ja_JP.SHIFT_JIS jp_JP_SHIFT_JIS
+TestCodePage ja_JP.SJIS jp_JP_SHIFT_JIS
+
+#for ((x=1;x<1000;x++)); do printf ' [0x%04x]=%-11q' "$x" "$(printf "$(printf '\\U%08x' $x)")" ; [ $(($x%5)) = 0 ] && echo; done
+C_UTF_8=(
+ [0x0001]=$'\001'     [0x0002]=$'\002'     [0x0003]=$'\003'     [0x0004]=$'\004'     [0x0005]=$'\005'    
+ [0x0006]=$'\006'     [0x0007]=$'\a'       [0x0008]=$'\b'       [0x0009]=$'\t'       [0x000a]=''         
+ [0x000b]=$'\v'       [0x000c]=$'\f'       [0x000d]=$'\r'       [0x000e]=$'\016'     [0x000f]=$'\017'    
+ [0x0010]=$'\020'     [0x0011]=$'\021'     [0x0012]=$'\022'     [0x0013]=$'\023'     [0x0014]=$'\024'    
+ [0x0015]=$'\025'     [0x0016]=$'\026'     [0x0017]=$'\027'     [0x0018]=$'\030'     [0x0019]=$'\031'    
+ [0x001a]=$'\032'     [0x001b]=$'\E'       [0x001c]=$'\034'     [0x001d]=$'\035'     [0x001e]=$'\036'    
+ [0x001f]=$'\037'     [0x0020]=\           [0x0021]=\!          [0x0022]=\"          [0x0023]=\#         
+ [0x0024]=\$          [0x0025]=%           [0x0026]=\&          [0x0027]=\'          [0x0028]=\(         
+ [0x0029]=\)          [0x002a]=\*          [0x002b]=+           [0x002c]=\,          [0x002d]=-          
+ [0x002e]=.           [0x002f]=/           [0x0030]=0           [0x0031]=1           [0x0032]=2          
+ [0x0033]=3           [0x0034]=4           [0x0035]=5           [0x0036]=6           [0x0037]=7          
+ [0x0038]=8           [0x0039]=9           [0x003a]=:           [0x003b]=\;          [0x003c]=\<         
+ [0x003d]==           [0x003e]=\>          [0x003f]=\?          [0x0040]=@           [0x0041]=A          
+ [0x0042]=B           [0x0043]=C           [0x0044]=D           [0x0045]=E           [0x0046]=F          
+ [0x0047]=G           [0x0048]=H           [0x0049]=I           [0x004a]=J           [0x004b]=K          
+ [0x004c]=L           [0x004d]=M           [0x004e]=N           [0x004f]=O           [0x0050]=P          
+ [0x0051]=Q           [0x0052]=R           [0x0053]=S           [0x0054]=T           [0x0055]=U          
+ [0x0056]=V           [0x0057]=W           [0x0058]=X           [0x0059]=Y           [0x005a]=Z          
+ [0x005b]=\[          [0x005c]=\\          [0x005d]=\]          [0x005e]=\^          [0x005f]=_          
+ [0x0060]=\`          [0x0061]=a           [0x0062]=b           [0x0063]=c           [0x0064]=d          
+ [0x0065]=e           [0x0066]=f           [0x0067]=g           [0x0068]=h           [0x0069]=i          
+ [0x006a]=j           [0x006b]=k           [0x006c]=l           [0x006d]=m           [0x006e]=n          
+ [0x006f]=o           [0x0070]=p           [0x0071]=q           [0x0072]=r           [0x0073]=s          
+ [0x0074]=t           [0x0075]=u           [0x0076]=v           [0x0077]=w           [0x0078]=x          
+ [0x0079]=y           [0x007a]=z           [0x007b]=\{          [0x007c]=\|          [0x007d]=\}         
+ [0x007e]="~"         [0x007f]=$'\177'     [0x0080]=$'\302\200' [0x0081]=$'\302\201' [0x0082]=$'\302\202'
+ [0x0083]=$'\302\203' [0x0084]=$'\302\204' [0x0085]=$'\302\205' [0x0086]=$'\302\206' [0x0087]=$'\302\207'
+ [0x0088]=$'\302\210' [0x0089]=$'\302\211' [0x008a]=$'\302\212' [0x008b]=$'\302\213' [0x008c]=$'\302\214'
+ [0x008d]=$'\302\215' [0x008e]=$'\302\216' [0x008f]=$'\302\217' [0x0090]=$'\302\220' [0x0091]=$'\302\221'
+ [0x0092]=$'\302\222' [0x0093]=$'\302\223' [0x0094]=$'\302\224' [0x0095]=$'\302\225' [0x0096]=$'\302\226'
+ [0x0097]=$'\302\227' [0x0098]=$'\302\230' [0x0099]=$'\302\231' [0x009a]=$'\302\232' [0x009b]=$'\302\233'
+ [0x009c]=$'\302\234' [0x009d]=$'\302\235' [0x009e]=$'\302\236' [0x009f]=$'\302\237' [0x00a0]=$'\302\240'
+ [0x00a1]=$'\302\241' [0x00a2]=$'\302\242' [0x00a3]=$'\302\243' [0x00a4]=$'\302\244' [0x00a5]=$'\302\245'
+ [0x00a6]=$'\302\246' [0x00a7]=$'\302\247' [0x00a8]=$'\302\250' [0x00a9]=$'\302\251' [0x00aa]=$'\302\252'
+ [0x00ab]=$'\302\253' [0x00ac]=$'\302\254' [0x00ad]=$'\302\255' [0x00ae]=$'\302\256' [0x00af]=$'\302\257'
+ [0x00b0]=$'\302\260' [0x00b1]=$'\302\261' [0x00b2]=$'\302\262' [0x00b3]=$'\302\263' [0x00b4]=$'\302\264'
+ [0x00b5]=$'\302\265' [0x00b6]=$'\302\266' [0x00b7]=$'\302\267' [0x00b8]=$'\302\270' [0x00b9]=$'\302\271'
+ [0x00ba]=$'\302\272' [0x00bb]=$'\302\273' [0x00bc]=$'\302\274' [0x00bd]=$'\302\275' [0x00be]=$'\302\276'
+ [0x00bf]=$'\302\277' [0x00c0]=$'\303\200' [0x00c1]=$'\303\201' [0x00c2]=$'\303\202' [0x00c3]=$'\303\203'
+ [0x00c4]=$'\303\204' [0x00c5]=$'\303\205' [0x00c6]=$'\303\206' [0x00c7]=$'\303\207' [0x00c8]=$'\303\210'
+ [0x00c9]=$'\303\211' [0x00ca]=$'\303\212' [0x00cb]=$'\303\213' [0x00cc]=$'\303\214' [0x00cd]=$'\303\215'
+ [0x00ce]=$'\303\216' [0x00cf]=$'\303\217' [0x00d0]=$'\303\220' [0x00d1]=$'\303\221' [0x00d2]=$'\303\222'
+ [0x00d3]=$'\303\223' [0x00d4]=$'\303\224' [0x00d5]=$'\303\225' [0x00d6]=$'\303\226' [0x00d7]=$'\303\227'
+ [0x00d8]=$'\303\230' [0x00d9]=$'\303\231' [0x00da]=$'\303\232' [0x00db]=$'\303\233' [0x00dc]=$'\303\234'
+ [0x00dd]=$'\303\235' [0x00de]=$'\303\236' [0x00df]=$'\303\237' [0x00e0]=$'\303\240' [0x00e1]=$'\303\241'
+ [0x00e2]=$'\303\242' [0x00e3]=$'\303\243' [0x00e4]=$'\303\244' [0x00e5]=$'\303\245' [0x00e6]=$'\303\246'
+ [0x00e7]=$'\303\247' [0x00e8]=$'\303\250' [0x00e9]=$'\303\251' [0x00ea]=$'\303\252' [0x00eb]=$'\303\253'
+ [0x00ec]=$'\303\254' [0x00ed]=$'\303\255' [0x00ee]=$'\303\256' [0x00ef]=$'\303\257' [0x00f0]=$'\303\260'
+ [0x00f1]=$'\303\261' [0x00f2]=$'\303\262' [0x00f3]=$'\303\263' [0x00f4]=$'\303\264' [0x00f5]=$'\303\265'
+ [0x00f6]=$'\303\266' [0x00f7]=$'\303\267' [0x00f8]=$'\303\270' [0x00f9]=$'\303\271' [0x00fa]=$'\303\272'
+ [0x00fb]=$'\303\273' [0x00fc]=$'\303\274' [0x00fd]=$'\303\275' [0x00fe]=$'\303\276' [0x00ff]=$'\303\277'
+ [0x0100]=$'\304\200' [0x0101]=$'\304\201' [0x0102]=$'\304\202' [0x0103]=$'\304\203' [0x0104]=$'\304\204'
+ [0x0105]=$'\304\205' [0x0106]=$'\304\206' [0x0107]=$'\304\207' [0x0108]=$'\304\210' [0x0109]=$'\304\211'
+ [0x010a]=$'\304\212' [0x010b]=$'\304\213' [0x010c]=$'\304\214' [0x010d]=$'\304\215' [0x010e]=$'\304\216'
+ [0x010f]=$'\304\217' [0x0110]=$'\304\220' [0x0111]=$'\304\221' [0x0112]=$'\304\222' [0x0113]=$'\304\223'
+ [0x0114]=$'\304\224' [0x0115]=$'\304\225' [0x0116]=$'\304\226' [0x0117]=$'\304\227' [0x0118]=$'\304\230'
+ [0x0119]=$'\304\231' [0x011a]=$'\304\232' [0x011b]=$'\304\233' [0x011c]=$'\304\234' [0x011d]=$'\304\235'
+ [0x011e]=$'\304\236' [0x011f]=$'\304\237' [0x0120]=$'\304\240' [0x0121]=$'\304\241' [0x0122]=$'\304\242'
+ [0x0123]=$'\304\243' [0x0124]=$'\304\244' [0x0125]=$'\304\245' [0x0126]=$'\304\246' [0x0127]=$'\304\247'
+ [0x0128]=$'\304\250' [0x0129]=$'\304\251' [0x012a]=$'\304\252' [0x012b]=$'\304\253' [0x012c]=$'\304\254'
+ [0x012d]=$'\304\255' [0x012e]=$'\304\256' [0x012f]=$'\304\257' [0x0130]=$'\304\260' [0x0131]=$'\304\261'
+ [0x0132]=$'\304\262' [0x0133]=$'\304\263' [0x0134]=$'\304\264' [0x0135]=$'\304\265' [0x0136]=$'\304\266'
+ [0x0137]=$'\304\267' [0x0138]=$'\304\270' [0x0139]=$'\304\271' [0x013a]=$'\304\272' [0x013b]=$'\304\273'
+ [0x013c]=$'\304\274' [0x013d]=$'\304\275' [0x013e]=$'\304\276' [0x013f]=$'\304\277' [0x0140]=$'\305\200'
+ [0x0141]=$'\305\201' [0x0142]=$'\305\202' [0x0143]=$'\305\203' [0x0144]=$'\305\204' [0x0145]=$'\305\205'
+ [0x0146]=$'\305\206' [0x0147]=$'\305\207' [0x0148]=$'\305\210' [0x0149]=$'\305\211' [0x014a]=$'\305\212'
+ [0x014b]=$'\305\213' [0x014c]=$'\305\214' [0x014d]=$'\305\215' [0x014e]=$'\305\216' [0x014f]=$'\305\217'
+ [0x0150]=$'\305\220' [0x0151]=$'\305\221' [0x0152]=$'\305\222' [0x0153]=$'\305\223' [0x0154]=$'\305\224'
+ [0x0155]=$'\305\225' [0x0156]=$'\305\226' [0x0157]=$'\305\227' [0x0158]=$'\305\230' [0x0159]=$'\305\231'
+ [0x015a]=$'\305\232' [0x015b]=$'\305\233' [0x015c]=$'\305\234' [0x015d]=$'\305\235' [0x015e]=$'\305\236'
+ [0x015f]=$'\305\237' [0x0160]=$'\305\240' [0x0161]=$'\305\241' [0x0162]=$'\305\242' [0x0163]=$'\305\243'
+ [0x0164]=$'\305\244' [0x0165]=$'\305\245' [0x0166]=$'\305\246' [0x0167]=$'\305\247' [0x0168]=$'\305\250'
+ [0x0169]=$'\305\251' [0x016a]=$'\305\252' [0x016b]=$'\305\253' [0x016c]=$'\305\254' [0x016d]=$'\305\255'
+ [0x016e]=$'\305\256' [0x016f]=$'\305\257' [0x0170]=$'\305\260' [0x0171]=$'\305\261' [0x0172]=$'\305\262'
+ [0x0173]=$'\305\263' [0x0174]=$'\305\264' [0x0175]=$'\305\265' [0x0176]=$'\305\266' [0x0177]=$'\305\267'
+ [0x0178]=$'\305\270' [0x0179]=$'\305\271' [0x017a]=$'\305\272' [0x017b]=$'\305\273' [0x017c]=$'\305\274'
+ [0x017d]=$'\305\275' [0x017e]=$'\305\276' [0x017f]=$'\305\277' [0x0180]=$'\306\200' [0x0181]=$'\306\201'
+ [0x0182]=$'\306\202' [0x0183]=$'\306\203' [0x0184]=$'\306\204' [0x0185]=$'\306\205' [0x0186]=$'\306\206'
+ [0x0187]=$'\306\207' [0x0188]=$'\306\210' [0x0189]=$'\306\211' [0x018a]=$'\306\212' [0x018b]=$'\306\213'
+ [0x018c]=$'\306\214' [0x018d]=$'\306\215' [0x018e]=$'\306\216' [0x018f]=$'\306\217' [0x0190]=$'\306\220'
+ [0x0191]=$'\306\221' [0x0192]=$'\306\222' [0x0193]=$'\306\223' [0x0194]=$'\306\224' [0x0195]=$'\306\225'
+ [0x0196]=$'\306\226' [0x0197]=$'\306\227' [0x0198]=$'\306\230' [0x0199]=$'\306\231' [0x019a]=$'\306\232'
+ [0x019b]=$'\306\233' [0x019c]=$'\306\234' [0x019d]=$'\306\235' [0x019e]=$'\306\236' [0x019f]=$'\306\237'
+ [0x01a0]=$'\306\240' [0x01a1]=$'\306\241' [0x01a2]=$'\306\242' [0x01a3]=$'\306\243' [0x01a4]=$'\306\244'
+ [0x01a5]=$'\306\245' [0x01a6]=$'\306\246' [0x01a7]=$'\306\247' [0x01a8]=$'\306\250' [0x01a9]=$'\306\251'
+ [0x01aa]=$'\306\252' [0x01ab]=$'\306\253' [0x01ac]=$'\306\254' [0x01ad]=$'\306\255' [0x01ae]=$'\306\256'
+ [0x01af]=$'\306\257' [0x01b0]=$'\306\260' [0x01b1]=$'\306\261' [0x01b2]=$'\306\262' [0x01b3]=$'\306\263'
+ [0x01b4]=$'\306\264' [0x01b5]=$'\306\265' [0x01b6]=$'\306\266' [0x01b7]=$'\306\267' [0x01b8]=$'\306\270'
+ [0x01b9]=$'\306\271' [0x01ba]=$'\306\272' [0x01bb]=$'\306\273' [0x01bc]=$'\306\274' [0x01bd]=$'\306\275'
+ [0x01be]=$'\306\276' [0x01bf]=$'\306\277' [0x01c0]=$'\307\200' [0x01c1]=$'\307\201' [0x01c2]=$'\307\202'
+ [0x01c3]=$'\307\203' [0x01c4]=$'\307\204' [0x01c5]=$'\307\205' [0x01c6]=$'\307\206' [0x01c7]=$'\307\207'
+ [0x01c8]=$'\307\210' [0x01c9]=$'\307\211' [0x01ca]=$'\307\212' [0x01cb]=$'\307\213' [0x01cc]=$'\307\214'
+ [0x01cd]=$'\307\215' [0x01ce]=$'\307\216' [0x01cf]=$'\307\217' [0x01d0]=$'\307\220' [0x01d1]=$'\307\221'
+ [0x01d2]=$'\307\222' [0x01d3]=$'\307\223' [0x01d4]=$'\307\224' [0x01d5]=$'\307\225' [0x01d6]=$'\307\226'
+ [0x01d7]=$'\307\227' [0x01d8]=$'\307\230' [0x01d9]=$'\307\231' [0x01da]=$'\307\232' [0x01db]=$'\307\233'
+ [0x01dc]=$'\307\234' [0x01dd]=$'\307\235' [0x01de]=$'\307\236' [0x01df]=$'\307\237' [0x01e0]=$'\307\240'
+ [0x01e1]=$'\307\241' [0x01e2]=$'\307\242' [0x01e3]=$'\307\243' [0x01e4]=$'\307\244' [0x01e5]=$'\307\245'
+ [0x01e6]=$'\307\246' [0x01e7]=$'\307\247' [0x01e8]=$'\307\250' [0x01e9]=$'\307\251' [0x01ea]=$'\307\252'
+ [0x01eb]=$'\307\253' [0x01ec]=$'\307\254' [0x01ed]=$'\307\255' [0x01ee]=$'\307\256' [0x01ef]=$'\307\257'
+ [0x01f0]=$'\307\260' [0x01f1]=$'\307\261' [0x01f2]=$'\307\262' [0x01f3]=$'\307\263' [0x01f4]=$'\307\264'
+ [0x01f5]=$'\307\265' [0x01f6]=$'\307\266' [0x01f7]=$'\307\267' [0x01f8]=$'\307\270' [0x01f9]=$'\307\271'
+ [0x01fa]=$'\307\272' [0x01fb]=$'\307\273' [0x01fc]=$'\307\274' [0x01fd]=$'\307\275' [0x01fe]=$'\307\276'
+ [0x01ff]=$'\307\277' [0x0200]=$'\310\200' [0x0201]=$'\310\201' [0x0202]=$'\310\202' [0x0203]=$'\310\203'
+ [0x0204]=$'\310\204' [0x0205]=$'\310\205' [0x0206]=$'\310\206' [0x0207]=$'\310\207' [0x0208]=$'\310\210'
+ [0x0209]=$'\310\211' [0x020a]=$'\310\212' [0x020b]=$'\310\213' [0x020c]=$'\310\214' [0x020d]=$'\310\215'
+ [0x020e]=$'\310\216' [0x020f]=$'\310\217' [0x0210]=$'\310\220' [0x0211]=$'\310\221' [0x0212]=$'\310\222'
+ [0x0213]=$'\310\223' [0x0214]=$'\310\224' [0x0215]=$'\310\225' [0x0216]=$'\310\226' [0x0217]=$'\310\227'
+ [0x0218]=$'\310\230' [0x0219]=$'\310\231' [0x021a]=$'\310\232' [0x021b]=$'\310\233' [0x021c]=$'\310\234'
+ [0x021d]=$'\310\235' [0x021e]=$'\310\236' [0x021f]=$'\310\237' [0x0220]=$'\310\240' [0x0221]=$'\310\241'
+ [0x0222]=$'\310\242' [0x0223]=$'\310\243' [0x0224]=$'\310\244' [0x0225]=$'\310\245' [0x0226]=$'\310\246'
+ [0x0227]=$'\310\247' [0x0228]=$'\310\250' [0x0229]=$'\310\251' [0x022a]=$'\310\252' [0x022b]=$'\310\253'
+ [0x022c]=$'\310\254' [0x022d]=$'\310\255' [0x022e]=$'\310\256' [0x022f]=$'\310\257' [0x0230]=$'\310\260'
+ [0x0231]=$'\310\261' [0x0232]=$'\310\262' [0x0233]=$'\310\263' [0x0234]=$'\310\264' [0x0235]=$'\310\265'
+ [0x0236]=$'\310\266' [0x0237]=$'\310\267' [0x0238]=$'\310\270' [0x0239]=$'\310\271' [0x023a]=$'\310\272'
+ [0x023b]=$'\310\273' [0x023c]=$'\310\274' [0x023d]=$'\310\275' [0x023e]=$'\310\276' [0x023f]=$'\310\277'
+ [0x0240]=$'\311\200' [0x0241]=$'\311\201' [0x0242]=$'\311\202' [0x0243]=$'\311\203' [0x0244]=$'\311\204'
+ [0x0245]=$'\311\205' [0x0246]=$'\311\206' [0x0247]=$'\311\207' [0x0248]=$'\311\210' [0x0249]=$'\311\211'
+ [0x024a]=$'\311\212' [0x024b]=$'\311\213' [0x024c]=$'\311\214' [0x024d]=$'\311\215' [0x024e]=$'\311\216'
+ [0x024f]=$'\311\217' [0x0250]=$'\311\220' [0x0251]=$'\311\221' [0x0252]=$'\311\222' [0x0253]=$'\311\223'
+ [0x0254]=$'\311\224' [0x0255]=$'\311\225' [0x0256]=$'\311\226' [0x0257]=$'\311\227' [0x0258]=$'\311\230'
+ [0x0259]=$'\311\231' [0x025a]=$'\311\232' [0x025b]=$'\311\233' [0x025c]=$'\311\234' [0x025d]=$'\311\235'
+ [0x025e]=$'\311\236' [0x025f]=$'\311\237' [0x0260]=$'\311\240' [0x0261]=$'\311\241' [0x0262]=$'\311\242'
+ [0x0263]=$'\311\243' [0x0264]=$'\311\244' [0x0265]=$'\311\245' [0x0266]=$'\311\246' [0x0267]=$'\311\247'
+ [0x0268]=$'\311\250' [0x0269]=$'\311\251' [0x026a]=$'\311\252' [0x026b]=$'\311\253' [0x026c]=$'\311\254'
+ [0x026d]=$'\311\255' [0x026e]=$'\311\256' [0x026f]=$'\311\257' [0x0270]=$'\311\260' [0x0271]=$'\311\261'
+ [0x0272]=$'\311\262' [0x0273]=$'\311\263' [0x0274]=$'\311\264' [0x0275]=$'\311\265' [0x0276]=$'\311\266'
+ [0x0277]=$'\311\267' [0x0278]=$'\311\270' [0x0279]=$'\311\271' [0x027a]=$'\311\272' [0x027b]=$'\311\273'
+ [0x027c]=$'\311\274' [0x027d]=$'\311\275' [0x027e]=$'\311\276' [0x027f]=$'\311\277' [0x0280]=$'\312\200'
+ [0x0281]=$'\312\201' [0x0282]=$'\312\202' [0x0283]=$'\312\203' [0x0284]=$'\312\204' [0x0285]=$'\312\205'
+ [0x0286]=$'\312\206' [0x0287]=$'\312\207' [0x0288]=$'\312\210' [0x0289]=$'\312\211' [0x028a]=$'\312\212'
+ [0x028b]=$'\312\213' [0x028c]=$'\312\214' [0x028d]=$'\312\215' [0x028e]=$'\312\216' [0x028f]=$'\312\217'
+ [0x0290]=$'\312\220' [0x0291]=$'\312\221' [0x0292]=$'\312\222' [0x0293]=$'\312\223' [0x0294]=$'\312\224'
+ [0x0295]=$'\312\225' [0x0296]=$'\312\226' [0x0297]=$'\312\227' [0x0298]=$'\312\230' [0x0299]=$'\312\231'
+ [0x029a]=$'\312\232' [0x029b]=$'\312\233' [0x029c]=$'\312\234' [0x029d]=$'\312\235' [0x029e]=$'\312\236'
+ [0x029f]=$'\312\237' [0x02a0]=$'\312\240' [0x02a1]=$'\312\241' [0x02a2]=$'\312\242' [0x02a3]=$'\312\243'
+ [0x02a4]=$'\312\244' [0x02a5]=$'\312\245' [0x02a6]=$'\312\246' [0x02a7]=$'\312\247' [0x02a8]=$'\312\250'
+ [0x02a9]=$'\312\251' [0x02aa]=$'\312\252' [0x02ab]=$'\312\253' [0x02ac]=$'\312\254' [0x02ad]=$'\312\255'
+ [0x02ae]=$'\312\256' [0x02af]=$'\312\257' [0x02b0]=$'\312\260' [0x02b1]=$'\312\261' [0x02b2]=$'\312\262'
+ [0x02b3]=$'\312\263' [0x02b4]=$'\312\264' [0x02b5]=$'\312\265' [0x02b6]=$'\312\266' [0x02b7]=$'\312\267'
+ [0x02b8]=$'\312\270' [0x02b9]=$'\312\271' [0x02ba]=$'\312\272' [0x02bb]=$'\312\273' [0x02bc]=$'\312\274'
+ [0x02bd]=$'\312\275' [0x02be]=$'\312\276' [0x02bf]=$'\312\277' [0x02c0]=$'\313\200' [0x02c1]=$'\313\201'
+ [0x02c2]=$'\313\202' [0x02c3]=$'\313\203' [0x02c4]=$'\313\204' [0x02c5]=$'\313\205' [0x02c6]=$'\313\206'
+ [0x02c7]=$'\313\207' [0x02c8]=$'\313\210' [0x02c9]=$'\313\211' [0x02ca]=$'\313\212' [0x02cb]=$'\313\213'
+ [0x02cc]=$'\313\214' [0x02cd]=$'\313\215' [0x02ce]=$'\313\216' [0x02cf]=$'\313\217' [0x02d0]=$'\313\220'
+ [0x02d1]=$'\313\221' [0x02d2]=$'\313\222' [0x02d3]=$'\313\223' [0x02d4]=$'\313\224' [0x02d5]=$'\313\225'
+ [0x02d6]=$'\313\226' [0x02d7]=$'\313\227' [0x02d8]=$'\313\230' [0x02d9]=$'\313\231' [0x02da]=$'\313\232'
+ [0x02db]=$'\313\233' [0x02dc]=$'\313\234' [0x02dd]=$'\313\235' [0x02de]=$'\313\236' [0x02df]=$'\313\237'
+ [0x02e0]=$'\313\240' [0x02e1]=$'\313\241' [0x02e2]=$'\313\242' [0x02e3]=$'\313\243' [0x02e4]=$'\313\244'
+ [0x02e5]=$'\313\245' [0x02e6]=$'\313\246' [0x02e7]=$'\313\247' [0x02e8]=$'\313\250' [0x02e9]=$'\313\251'
+ [0x02ea]=$'\313\252' [0x02eb]=$'\313\253' [0x02ec]=$'\313\254' [0x02ed]=$'\313\255' [0x02ee]=$'\313\256'
+ [0x02ef]=$'\313\257' [0x02f0]=$'\313\260' [0x02f1]=$'\313\261' [0x02f2]=$'\313\262' [0x02f3]=$'\313\263'
+ [0x02f4]=$'\313\264' [0x02f5]=$'\313\265' [0x02f6]=$'\313\266' [0x02f7]=$'\313\267' [0x02f8]=$'\313\270'
+ [0x02f9]=$'\313\271' [0x02fa]=$'\313\272' [0x02fb]=$'\313\273' [0x02fc]=$'\313\274' [0x02fd]=$'\313\275'
+ [0x02fe]=$'\313\276' [0x02ff]=$'\313\277' [0x0300]=$'\314\200' [0x0301]=$'\314\201' [0x0302]=$'\314\202'
+ [0x0303]=$'\314\203' [0x0304]=$'\314\204' [0x0305]=$'\314\205' [0x0306]=$'\314\206' [0x0307]=$'\314\207'
+ [0x0308]=$'\314\210' [0x0309]=$'\314\211' [0x030a]=$'\314\212' [0x030b]=$'\314\213' [0x030c]=$'\314\214'
+ [0x030d]=$'\314\215' [0x030e]=$'\314\216' [0x030f]=$'\314\217' [0x0310]=$'\314\220' [0x0311]=$'\314\221'
+ [0x0312]=$'\314\222' [0x0313]=$'\314\223' [0x0314]=$'\314\224' [0x0315]=$'\314\225' [0x0316]=$'\314\226'
+ [0x0317]=$'\314\227' [0x0318]=$'\314\230' [0x0319]=$'\314\231' [0x031a]=$'\314\232' [0x031b]=$'\314\233'
+ [0x031c]=$'\314\234' [0x031d]=$'\314\235' [0x031e]=$'\314\236' [0x031f]=$'\314\237' [0x0320]=$'\314\240'
+ [0x0321]=$'\314\241' [0x0322]=$'\314\242' [0x0323]=$'\314\243' [0x0324]=$'\314\244' [0x0325]=$'\314\245'
+ [0x0326]=$'\314\246' [0x0327]=$'\314\247' [0x0328]=$'\314\250' [0x0329]=$'\314\251' [0x032a]=$'\314\252'
+ [0x032b]=$'\314\253' [0x032c]=$'\314\254' [0x032d]=$'\314\255' [0x032e]=$'\314\256' [0x032f]=$'\314\257'
+ [0x0330]=$'\314\260' [0x0331]=$'\314\261' [0x0332]=$'\314\262' [0x0333]=$'\314\263' [0x0334]=$'\314\264'
+ [0x0335]=$'\314\265' [0x0336]=$'\314\266' [0x0337]=$'\314\267' [0x0338]=$'\314\270' [0x0339]=$'\314\271'
+ [0x033a]=$'\314\272' [0x033b]=$'\314\273' [0x033c]=$'\314\274' [0x033d]=$'\314\275' [0x033e]=$'\314\276'
+ [0x033f]=$'\314\277' [0x0340]=$'\315\200' [0x0341]=$'\315\201' [0x0342]=$'\315\202' [0x0343]=$'\315\203'
+ [0x0344]=$'\315\204' [0x0345]=$'\315\205' [0x0346]=$'\315\206' [0x0347]=$'\315\207' [0x0348]=$'\315\210'
+ [0x0349]=$'\315\211' [0x034a]=$'\315\212' [0x034b]=$'\315\213' [0x034c]=$'\315\214' [0x034d]=$'\315\215'
+ [0x034e]=$'\315\216' [0x034f]=$'\315\217' [0x0350]=$'\315\220' [0x0351]=$'\315\221' [0x0352]=$'\315\222'
+ [0x0353]=$'\315\223' [0x0354]=$'\315\224' [0x0355]=$'\315\225' [0x0356]=$'\315\226' [0x0357]=$'\315\227'
+ [0x0358]=$'\315\230' [0x0359]=$'\315\231' [0x035a]=$'\315\232' [0x035b]=$'\315\233' [0x035c]=$'\315\234'
+ [0x035d]=$'\315\235' [0x035e]=$'\315\236' [0x035f]=$'\315\237' [0x0360]=$'\315\240' [0x0361]=$'\315\241'
+ [0x0362]=$'\315\242' [0x0363]=$'\315\243' [0x0364]=$'\315\244' [0x0365]=$'\315\245' [0x0366]=$'\315\246'
+ [0x0367]=$'\315\247' [0x0368]=$'\315\250' [0x0369]=$'\315\251' [0x036a]=$'\315\252' [0x036b]=$'\315\253'
+ [0x036c]=$'\315\254' [0x036d]=$'\315\255' [0x036e]=$'\315\256' [0x036f]=$'\315\257' [0x0370]=$'\315\260'
+ [0x0371]=$'\315\261' [0x0372]=$'\315\262' [0x0373]=$'\315\263' [0x0374]=$'\315\264' [0x0375]=$'\315\265'
+ [0x0376]=$'\315\266' [0x0377]=$'\315\267' [0x0378]=$'\315\270' [0x0379]=$'\315\271' [0x037a]=$'\315\272'
+ [0x037b]=$'\315\273' [0x037c]=$'\315\274' [0x037d]=$'\315\275' [0x037e]=$'\315\276' [0x037f]=$'\315\277'
+ [0x0380]=$'\316\200' [0x0381]=$'\316\201' [0x0382]=$'\316\202' [0x0383]=$'\316\203' [0x0384]=$'\316\204'
+ [0x0385]=$'\316\205' [0x0386]=$'\316\206' [0x0387]=$'\316\207' [0x0388]=$'\316\210' [0x0389]=$'\316\211'
+ [0x038a]=$'\316\212' [0x038b]=$'\316\213' [0x038c]=$'\316\214' [0x038d]=$'\316\215' [0x038e]=$'\316\216'
+ [0x038f]=$'\316\217' [0x0390]=$'\316\220' [0x0391]=$'\316\221' [0x0392]=$'\316\222' [0x0393]=$'\316\223'
+ [0x0394]=$'\316\224' [0x0395]=$'\316\225' [0x0396]=$'\316\226' [0x0397]=$'\316\227' [0x0398]=$'\316\230'
+ [0x0399]=$'\316\231' [0x039a]=$'\316\232' [0x039b]=$'\316\233' [0x039c]=$'\316\234' [0x039d]=$'\316\235'
+ [0x039e]=$'\316\236' [0x039f]=$'\316\237' [0x03a0]=$'\316\240' [0x03a1]=$'\316\241' [0x03a2]=$'\316\242'
+ [0x03a3]=$'\316\243' [0x03a4]=$'\316\244' [0x03a5]=$'\316\245' [0x03a6]=$'\316\246' [0x03a7]=$'\316\247'
+ [0x03a8]=$'\316\250' [0x03a9]=$'\316\251' [0x03aa]=$'\316\252' [0x03ab]=$'\316\253' [0x03ac]=$'\316\254'
+ [0x03ad]=$'\316\255' [0x03ae]=$'\316\256' [0x03af]=$'\316\257' [0x03b0]=$'\316\260' [0x03b1]=$'\316\261'
+ [0x03b2]=$'\316\262' [0x03b3]=$'\316\263' [0x03b4]=$'\316\264' [0x03b5]=$'\316\265' [0x03b6]=$'\316\266'
+ [0x03b7]=$'\316\267' [0x03b8]=$'\316\270' [0x03b9]=$'\316\271' [0x03ba]=$'\316\272' [0x03bb]=$'\316\273'
+ [0x03bc]=$'\316\274' [0x03bd]=$'\316\275' [0x03be]=$'\316\276' [0x03bf]=$'\316\277' [0x03c0]=$'\317\200'
+ [0x03c1]=$'\317\201' [0x03c2]=$'\317\202' [0x03c3]=$'\317\203' [0x03c4]=$'\317\204' [0x03c5]=$'\317\205'
+ [0x03c6]=$'\317\206' [0x03c7]=$'\317\207' [0x03c8]=$'\317\210' [0x03c9]=$'\317\211' [0x03ca]=$'\317\212'
+ [0x03cb]=$'\317\213' [0x03cc]=$'\317\214' [0x03cd]=$'\317\215' [0x03ce]=$'\317\216' [0x03cf]=$'\317\217'
+ [0x03d0]=$'\317\220' [0x03d1]=$'\317\221' [0x03d2]=$'\317\222' [0x03d3]=$'\317\223' [0x03d4]=$'\317\224'
+ [0x03d5]=$'\317\225' [0x03d6]=$'\317\226' [0x03d7]=$'\317\227' [0x03d8]=$'\317\230' [0x03d9]=$'\317\231'
+ [0x03da]=$'\317\232' [0x03db]=$'\317\233' [0x03dc]=$'\317\234' [0x03dd]=$'\317\235' [0x03de]=$'\317\236'
+ [0x03df]=$'\317\237' [0x03e0]=$'\317\240' [0x03e1]=$'\317\241' [0x03e2]=$'\317\242' [0x03e3]=$'\317\243'
+ [0x03e4]=$'\317\244' [0x03e5]=$'\317\245' [0x03e6]=$'\317\246' [0x03e7]=$'\317\247'
+
+
+ [0x1000]=$'\341\200\200' [0x1001]=$'\341\200\201' [0x1002]=$'\341\200\202' [0x1003]=$'\341\200\203' [0x1004]=$'\341\200\204'
+ [0x1005]=$'\341\200\205' [0x1006]=$'\341\200\206' [0x1007]=$'\341\200\207' [0x1008]=$'\341\200\210' [0x1009]=$'\341\200\211'
+ [0x100a]=$'\341\200\212' [0x100b]=$'\341\200\213' [0x100c]=$'\341\200\214' [0x100d]=$'\341\200\215' [0x100e]=$'\341\200\216'
+ [0x100f]=$'\341\200\217' [0x1010]=$'\341\200\220' [0x1011]=$'\341\200\221' [0x1012]=$'\341\200\222' [0x1013]=$'\341\200\223'
+ [0x1014]=$'\341\200\224' [0x1015]=$'\341\200\225' [0x1016]=$'\341\200\226' [0x1017]=$'\341\200\227' [0x1018]=$'\341\200\230'
+ [0x1019]=$'\341\200\231' [0x101a]=$'\341\200\232' [0x101b]=$'\341\200\233' [0x101c]=$'\341\200\234' [0x101d]=$'\341\200\235'
+ [0x101e]=$'\341\200\236' [0x101f]=$'\341\200\237' [0x1020]=$'\341\200\240' [0x1021]=$'\341\200\241' [0x1022]=$'\341\200\242'
+ [0x1023]=$'\341\200\243' [0x1024]=$'\341\200\244' [0x1025]=$'\341\200\245' [0x1026]=$'\341\200\246' [0x1027]=$'\341\200\247'
+ [0x1028]=$'\341\200\250' [0x1029]=$'\341\200\251' [0x102a]=$'\341\200\252' [0x102b]=$'\341\200\253' [0x102c]=$'\341\200\254'
+ [0x102d]=$'\341\200\255' [0x102e]=$'\341\200\256' [0x102f]=$'\341\200\257' [0x1030]=$'\341\200\260' [0x1031]=$'\341\200\261'
+ [0x1032]=$'\341\200\262' [0x1033]=$'\341\200\263' [0x1034]=$'\341\200\264' [0x1035]=$'\341\200\265' [0x1036]=$'\341\200\266'
+ [0x1037]=$'\341\200\267' [0x1038]=$'\341\200\270' [0x1039]=$'\341\200\271' [0x103a]=$'\341\200\272' [0x103b]=$'\341\200\273'
+ [0x103c]=$'\341\200\274' [0x103d]=$'\341\200\275' [0x103e]=$'\341\200\276' [0x103f]=$'\341\200\277' [0x1040]=$'\341\201\200'
+ [0x1041]=$'\341\201\201' [0x1042]=$'\341\201\202' [0x1043]=$'\341\201\203' [0x1044]=$'\341\201\204' [0x1045]=$'\341\201\205'
+ [0x1046]=$'\341\201\206' [0x1047]=$'\341\201\207' [0x1048]=$'\341\201\210' [0x1049]=$'\341\201\211' [0x104a]=$'\341\201\212'
+ [0x104b]=$'\341\201\213' [0x104c]=$'\341\201\214' [0x104d]=$'\341\201\215' [0x104e]=$'\341\201\216' [0x104f]=$'\341\201\217'
+
+ [0x10000]=$'\360\220\200\200' [0x10001]=$'\360\220\200\201' [0x10002]=$'\360\220\200\202' [0x10003]=$'\360\220\200\203' [0x10004]=$'\360\220\200\204'
+ [0x10005]=$'\360\220\200\205' [0x10006]=$'\360\220\200\206' [0x10007]=$'\360\220\200\207' [0x10008]=$'\360\220\200\210' [0x10009]=$'\360\220\200\211'
+ [0x1000a]=$'\360\220\200\212' [0x1000b]=$'\360\220\200\213' [0x1000c]=$'\360\220\200\214' [0x1000d]=$'\360\220\200\215' [0x1000e]=$'\360\220\200\216'
+ [0x1000f]=$'\360\220\200\217' [0x10010]=$'\360\220\200\220' [0x10011]=$'\360\220\200\221' [0x10012]=$'\360\220\200\222' [0x10013]=$'\360\220\200\223'
+ [0x10014]=$'\360\220\200\224' [0x10015]=$'\360\220\200\225' [0x10016]=$'\360\220\200\226' [0x10017]=$'\360\220\200\227' [0x10018]=$'\360\220\200\230'
+ [0x10019]=$'\360\220\200\231' [0x1001a]=$'\360\220\200\232' [0x1001b]=$'\360\220\200\233' [0x1001c]=$'\360\220\200\234' [0x1001d]=$'\360\220\200\235'
+ [0x1001e]=$'\360\220\200\236' [0x1001f]=$'\360\220\200\237' [0x10020]=$'\360\220\200\240' [0x10021]=$'\360\220\200\241' [0x10022]=$'\360\220\200\242'
+ [0x10023]=$'\360\220\200\243' [0x10024]=$'\360\220\200\244' [0x10025]=$'\360\220\200\245' [0x10026]=$'\360\220\200\246' [0x10027]=$'\360\220\200\247'
+ [0x10028]=$'\360\220\200\250' [0x10029]=$'\360\220\200\251' [0x1002a]=$'\360\220\200\252' [0x1002b]=$'\360\220\200\253' [0x1002c]=$'\360\220\200\254'
+ [0x1002d]=$'\360\220\200\255' [0x1002e]=$'\360\220\200\256' [0x1002f]=$'\360\220\200\257' [0x10030]=$'\360\220\200\260' [0x10031]=$'\360\220\200\261'
+ [0x10032]=$'\360\220\200\262' [0x10033]=$'\360\220\200\263' [0x10034]=$'\360\220\200\264' [0x10035]=$'\360\220\200\265' [0x10036]=$'\360\220\200\266'
+ [0x10037]=$'\360\220\200\267' [0x10038]=$'\360\220\200\270' [0x10039]=$'\360\220\200\271' [0x1003a]=$'\360\220\200\272' [0x1003b]=$'\360\220\200\273'
+ [0x1003c]=$'\360\220\200\274' [0x1003d]=$'\360\220\200\275' [0x1003e]=$'\360\220\200\276' [0x1003f]=$'\360\220\200\277' [0x10040]=$'\360\220\201\200'
+ [0x10041]=$'\360\220\201\201' [0x10042]=$'\360\220\201\202' [0x10043]=$'\360\220\201\203' [0x10044]=$'\360\220\201\204' [0x10045]=$'\360\220\201\205'
+ [0x10046]=$'\360\220\201\206' [0x10047]=$'\360\220\201\207' [0x10048]=$'\360\220\201\210' [0x10049]=$'\360\220\201\211' [0x1004a]=$'\360\220\201\212'
+ [0x1004b]=$'\360\220\201\213' [0x1004c]=$'\360\220\201\214' [0x1004d]=$'\360\220\201\215' [0x1004e]=$'\360\220\201\216' [0x1004f]=$'\360\220\201\217'
+
+ [0x1000000]=$'\371\200\200\200\200' [0x1000001]=$'\371\200\200\200\201' [0x1000002]=$'\371\200\200\200\202' [0x1000003]=$'\371\200\200\200\203' [0x1000004]=$'\371\200\200\200\204'
+ [0x1000005]=$'\371\200\200\200\205' [0x1000006]=$'\371\200\200\200\206' [0x1000007]=$'\371\200\200\200\207' [0x1000008]=$'\371\200\200\200\210' [0x1000009]=$'\371\200\200\200\211'
+ [0x100000a]=$'\371\200\200\200\212' [0x100000b]=$'\371\200\200\200\213' [0x100000c]=$'\371\200\200\200\214' [0x100000d]=$'\371\200\200\200\215' [0x100000e]=$'\371\200\200\200\216'
+ [0x100000f]=$'\371\200\200\200\217' [0x1000010]=$'\371\200\200\200\220' [0x1000011]=$'\371\200\200\200\221' [0x1000012]=$'\371\200\200\200\222' [0x1000013]=$'\371\200\200\200\223'
+ [0x1000014]=$'\371\200\200\200\224' [0x1000015]=$'\371\200\200\200\225' [0x1000016]=$'\371\200\200\200\226' [0x1000017]=$'\371\200\200\200\227' [0x1000018]=$'\371\200\200\200\230'
+ [0x1000019]=$'\371\200\200\200\231' [0x100001a]=$'\371\200\200\200\232' [0x100001b]=$'\371\200\200\200\233' [0x100001c]=$'\371\200\200\200\234' [0x100001d]=$'\371\200\200\200\235'
+ [0x100001e]=$'\371\200\200\200\236' [0x100001f]=$'\371\200\200\200\237' [0x1000020]=$'\371\200\200\200\240' [0x1000021]=$'\371\200\200\200\241' [0x1000022]=$'\371\200\200\200\242'
+ [0x1000023]=$'\371\200\200\200\243' [0x1000024]=$'\371\200\200\200\244' [0x1000025]=$'\371\200\200\200\245' [0x1000026]=$'\371\200\200\200\246' [0x1000027]=$'\371\200\200\200\247'
+ [0x1000028]=$'\371\200\200\200\250' [0x1000029]=$'\371\200\200\200\251' [0x100002a]=$'\371\200\200\200\252' [0x100002b]=$'\371\200\200\200\253' [0x100002c]=$'\371\200\200\200\254'
+ [0x100002d]=$'\371\200\200\200\255' [0x100002e]=$'\371\200\200\200\256' [0x100002f]=$'\371\200\200\200\257' [0x1000030]=$'\371\200\200\200\260' [0x1000031]=$'\371\200\200\200\261'
+ [0x1000032]=$'\371\200\200\200\262' [0x1000033]=$'\371\200\200\200\263' [0x1000034]=$'\371\200\200\200\264' [0x1000035]=$'\371\200\200\200\265' [0x1000036]=$'\371\200\200\200\266'
+ [0x1000037]=$'\371\200\200\200\267' [0x1000038]=$'\371\200\200\200\270' [0x1000039]=$'\371\200\200\200\271' [0x100003a]=$'\371\200\200\200\272' [0x100003b]=$'\371\200\200\200\273'
+ [0x100003c]=$'\371\200\200\200\274' [0x100003d]=$'\371\200\200\200\275' [0x100003e]=$'\371\200\200\200\276' [0x100003f]=$'\371\200\200\200\277' [0x1000040]=$'\371\200\200\201\200'
+ [0x1000041]=$'\371\200\200\201\201' [0x1000042]=$'\371\200\200\201\202' [0x1000043]=$'\371\200\200\201\203' [0x1000044]=$'\371\200\200\201\204' [0x1000045]=$'\371\200\200\201\205'
+ [0x1000046]=$'\371\200\200\201\206' [0x1000047]=$'\371\200\200\201\207' [0x1000048]=$'\371\200\200\201\210' [0x1000049]=$'\371\200\200\201\211' [0x100004a]=$'\371\200\200\201\212'
+ [0x100004b]=$'\371\200\200\201\213' [0x100004c]=$'\371\200\200\201\214' [0x100004d]=$'\371\200\200\201\215' [0x100004e]=$'\371\200\200\201\216' [0x100004f]=$'\371\200\200\201\217'
+
+ [0x70000000]=$'\375\260\200\200\200\200' [0x70000001]=$'\375\260\200\200\200\201' [0x70000002]=$'\375\260\200\200\200\202' [0x70000003]=$'\375\260\200\200\200\203'
+ [0x70000004]=$'\375\260\200\200\200\204' [0x70000005]=$'\375\260\200\200\200\205' [0x70000006]=$'\375\260\200\200\200\206' [0x70000007]=$'\375\260\200\200\200\207' [0x70000008]=$'\375\260\200\200\200\210'
+ [0x70000009]=$'\375\260\200\200\200\211' [0x7000000a]=$'\375\260\200\200\200\212' [0x7000000b]=$'\375\260\200\200\200\213' [0x7000000c]=$'\375\260\200\200\200\214' [0x7000000d]=$'\375\260\200\200\200\215'
+ [0x7000000e]=$'\375\260\200\200\200\216' [0x7000000f]=$'\375\260\200\200\200\217' [0x70000010]=$'\375\260\200\200\200\220' [0x70000011]=$'\375\260\200\200\200\221' [0x70000012]=$'\375\260\200\200\200\222'
+ [0x70000013]=$'\375\260\200\200\200\223' [0x70000014]=$'\375\260\200\200\200\224' [0x70000015]=$'\375\260\200\200\200\225' [0x70000016]=$'\375\260\200\200\200\226' [0x70000017]=$'\375\260\200\200\200\227'
+ [0x70000018]=$'\375\260\200\200\200\230' [0x70000019]=$'\375\260\200\200\200\231' [0x7000001a]=$'\375\260\200\200\200\232' [0x7000001b]=$'\375\260\200\200\200\233' [0x7000001c]=$'\375\260\200\200\200\234'
+ [0x7000001d]=$'\375\260\200\200\200\235' [0x7000001e]=$'\375\260\200\200\200\236' [0x7000001f]=$'\375\260\200\200\200\237' [0x70000020]=$'\375\260\200\200\200\240' [0x70000021]=$'\375\260\200\200\200\241'
+ [0x70000022]=$'\375\260\200\200\200\242' [0x70000023]=$'\375\260\200\200\200\243' [0x70000024]=$'\375\260\200\200\200\244' [0x70000025]=$'\375\260\200\200\200\245' [0x70000026]=$'\375\260\200\200\200\246'
+ [0x70000027]=$'\375\260\200\200\200\247' [0x70000028]=$'\375\260\200\200\200\250' [0x70000029]=$'\375\260\200\200\200\251' [0x7000002a]=$'\375\260\200\200\200\252' [0x7000002b]=$'\375\260\200\200\200\253'
+ [0x7000002c]=$'\375\260\200\200\200\254' [0x7000002d]=$'\375\260\200\200\200\255' [0x7000002e]=$'\375\260\200\200\200\256' [0x7000002f]=$'\375\260\200\200\200\257' [0x70000030]=$'\375\260\200\200\200\260'
+ [0x70000031]=$'\375\260\200\200\200\261' [0x70000032]=$'\375\260\200\200\200\262' [0x70000033]=$'\375\260\200\200\200\263' [0x70000034]=$'\375\260\200\200\200\264' [0x70000035]=$'\375\260\200\200\200\265'
+ [0x70000036]=$'\375\260\200\200\200\266' [0x70000037]=$'\375\260\200\200\200\267' [0x70000038]=$'\375\260\200\200\200\270' [0x70000039]=$'\375\260\200\200\200\271' [0x7000003a]=$'\375\260\200\200\200\272'
+ [0x7000003b]=$'\375\260\200\200\200\273' [0x7000003c]=$'\375\260\200\200\200\274' [0x7000003d]=$'\375\260\200\200\200\275' [0x7000003e]=$'\375\260\200\200\200\276' [0x7000003f]=$'\375\260\200\200\200\277'
+ [0x70000040]=$'\375\260\200\200\201\200' [0x70000041]=$'\375\260\200\200\201\201' [0x70000042]=$'\375\260\200\200\201\202' [0x70000043]=$'\375\260\200\200\201\203' [0x70000044]=$'\375\260\200\200\201\204'
+ [0x70000045]=$'\375\260\200\200\201\205' [0x70000046]=$'\375\260\200\200\201\206' [0x70000047]=$'\375\260\200\200\201\207' [0x70000048]=$'\375\260\200\200\201\210' [0x70000049]=$'\375\260\200\200\201\211'
+ [0x7000004a]=$'\375\260\200\200\201\212' [0x7000004b]=$'\375\260\200\200\201\213' [0x7000004c]=$'\375\260\200\200\201\214' [0x7000004d]=$'\375\260\200\200\201\215' [0x7000004e]=$'\375\260\200\200\201\216'
+
+
+
+ )
+TestCodePage en_US.UTF-8 C_UTF_8
+
+if [ ${ErrorCnt} -gt 0 ]; then
+  echo "Failed ${ErrorCnt} of ${TestCnt} Unicode tests"
+else
+  echo "Passed all ${TestCnt} Unicode tests"
+fi
diff --git a/tests/unicode2.sub b/tests/unicode2.sub
new file mode 100644
index 0000000..16dd604
--- /dev/null
+++ b/tests/unicode2.sub
@@ -0,0 +1,37 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+. ./test-glue-functions
+
+export LANG=en_US.UTF-8
+
+printf '%s\n' "$(printf '\uff')" | od -b | _intl_normalize_spaces
+printf '%s\n' $'\uff' | od -b | _intl_normalize_spaces
+
+printf '\uff'\\n | od -b | _intl_normalize_spaces
+echo $'\uff' | od -b | _intl_normalize_spaces
+
+printf '\uffff'\\n | od -b | _intl_normalize_spaces
+echo $'\uffff' | od -b | _intl_normalize_spaces
+
+printf '\Ufffffffe'\\n | od -b | _intl_normalize_spaces
+echo $'\Ufffffffe' | od -b | _intl_normalize_spaces
+
+printf '\Uffffffff'\\n | od -b | _intl_normalize_spaces
+echo $'\Uffffffff' | od -b | _intl_normalize_spaces
+
+LC_CTYPE=C printf '\uff'\\n | od -b | _intl_normalize_spaces
+LC_CTYPE=ru_RU.CP1251 printf '\uff'\\n | od -b | _intl_normalize_spaces
+LC_CTYPE=en_US.UTF-8 printf '\uff'\\n | od -b | _intl_normalize_spaces
+
+echo -e '\u0041 \u00a3 \u0152' | od -b | _intl_normalize_spaces
diff --git a/tests/unicode3.sub b/tests/unicode3.sub
new file mode 100644
index 0000000..cb1b873
--- /dev/null
+++ b/tests/unicode3.sub
@@ -0,0 +1,12 @@
+export LANG=en_US.UTF-8	# make sure
+
+cd $TMPDIR	# try to avoid NFS artifacts
+payload=$'\065\247\100\063\231\053\306\123\070\237\242\352\263'
+"$payload"
+
+cd "$payload"
+printf %q "$payload"
+echo
+
+set -x ; : "$payload" ; set +x
+cd $OLDPWD
diff --git a/tests/varenv.right b/tests/varenv.right
new file mode 100644
index 0000000..358f5dc
--- /dev/null
+++ b/tests/varenv.right
@@ -0,0 +1,270 @@
+3 4
+5 6 7 8 9
+7 8 9
+/usr/chet
+/usr/chet
+/usr/chet
+/a/b/c
+/usr/chet
+/usr/chet 7
+/a/b/c 9 /a/b/c
+/a/b/c 9 /a/b/c
+/a/b/c /a/b/c
+1 2
+1 1
+unset
+toronto airport
+AVAR
+song by rush
+BVAR
+toronto airport
+AVAR
+AVAR
+42
+/bin:/usr/bin:/usr/local/bin:.
+declare -a avar=([0]="/bin:/usr/bin:/usr/local/bin:.")
+declare -- z="yy"
+42
+declare -i ivar="10"
+unset
+declare -x ivar="42"
+hB
+braceexpand:hashall:interactive-comments
+hBP
+braceexpand:hashall:interactive-comments:physical
+declare -r SHELLOPTS="braceexpand:hashall:interactive-comments:physical"
+abcde
+20
+30
+40
+50
+|0|10|
+10
+|0|10|
+10
+|0|10|
+10
+|4|
+4
+|0|11|
+after fff3: x=4
+|0|12|
+|y|
+|y|
+a:b:c:d
+a-b-c-d
+a:b:c:d
+g: , 
+f: , 
+FIN: asdf fdsa, asdf fdsa
+g: v = , w =
+f: v = , w =
+FIN: v = two, w = one
+./varenv4.sub: line 67: bbb: unique: cannot convert indexed to associative array
+./varenv4.sub: line 67: declare: unique: cannot convert indexed to associative array
+after bbb: 1
+declare -Ar FOOBAR=([foo]="bar" )
+declare -Ar FOOBAR=([foo]="bar" )
+declare -ar FOOBAR2=([0]="bar")
+declare -ar FOOBAR2=([0]="bar")
+F OUTSIDE
+F OUTSIDE
+declare -ar outside=()
+declare -ir outside1="1"
+tempenv = foo
+0
+declare -ar myvar=([0]="0")
+1
+declare -ir myvar="1"
+declare -rx tempvar1='foo'
+declare -rx tempvar2='qux'
+./varenv7.sub: line 57: local: var: readonly variable
+inside: outside
+outside: outside
+local: unset1 unset2
+abc
+abc
+:1
+:2
+after: ----
+global:1
+global:2
+after: --global--
+after: ----
+x = :1:2
+in o1 (readonly modifying local scalars):
+declare -r i1="a b c"
+declare -r j1="1 2 3"
+after o1:
+./varenv9.sub: line 28: declare: i1: not found
+./varenv9.sub: line 28: declare: j1: not found
+in o2 (readonly setting global scalars):
+declare -r i2="a b c"
+declare -r j2="1 2 3"
+after o2:
+declare -r i2="a b c"
+declare -r j2="1 2 3"
+./varenv9.sub: line 46: unset: i2: cannot unset: readonly variable
+./varenv9.sub: line 46: unset: j2: cannot unset: readonly variable
+in o3 (readonly modifying locals, converting to arrays):
+declare -ar i3=([0]="a" [1]="b" [2]="c")
+declare -ar j3=([0]="1" [1]="2" [2]="3")
+after o3:
+./varenv9.sub: line 61: declare: i3: not found
+./varenv9.sub: line 61: declare: j3: not found
+in o4 (readonly setting global array variables):
+declare -ar i4=([0]="a" [1]="b" [2]="c")
+declare -ar j4=([0]="1" [1]="2" [2]="3")
+after o4:
+declare -ar i4=([0]="a" [1]="b" [2]="c")
+declare -ar j4=([0]="1" [1]="2" [2]="3")
+./varenv9.sub: line 79: unset: i4: cannot unset: readonly variable
+./varenv9.sub: line 79: unset: j4: cannot unset: readonly variable
+main: unset
+inner: res unset
+outer: res: X Y
+main: after first call: X
+inner: X
+outer: res: X Y
+main: after second call: X
+func: null or unset
+after func: x = outside
+./varenv11.sub: line 17: local: qux: readonly variable
+./varenv11.sub: line 18: qux: readonly variable
+./varenv11.sub: line 18: local: qux: readonly variable
+declare -A foo=([zero]="zero" [one]="one" )
+declare -a bar=([0]="zero" [1]="one")
+declare -A foo=([one]="one" [zero]="zero" )
+declare -a bar=([0]="zero" [1]="one")
+./varenv11.sub: line 42: a: readonly variable
+foo=abc
+func1: var =
+
+func1: var =
+
+inside: declare -- foo
+outside:
+declare -x foo="abc"
+inside: declare -x var="value"
+outside: declare -- var="one"
+inside: declare -x var="value"
+outside: declare -- var="outside"
+inside: declare -x var="inside"
+outside: declare -- var="outside"
+outside 1.0: var=one
+outside 1.1: var=one
+inside func: var=two
+outside 2.0: var=<unset>
+inside func: var=two
+outside 2.1: var=global
+inside func1: var=value
+outside 3.0: var=value
+inside func2: var=global
+outside 4.0: var=outside
+foo: hello world
+after foo: var=global
+bar: hello world
+after bar: var=global
+./varenv13.sub: line 16: `var[0]': not a valid identifier
+./varenv13.sub: line 16: `var[@]': not a valid identifier
+./varenv13.sub: line 14: declare: var: not found
+./varenv13.sub: line 25: var[@]: bad array subscript
+declare -A var=([0]="X" )
+help
+./varenv13.sub: line 34: `var[0]': not a valid identifier
+1
+declare -A var=([0]="X" )
+declare -A var=([Y]="Y" )
+declare -A var=([Y]="Y" )
+declare -A var=()
+declare -A var=()
+./varenv14.sub: line 31: f: var: cannot convert indexed to associative array
+./varenv14.sub: line 31: declare: var: cannot convert indexed to associative array
+declare -a var=([0]="12")
+declare -a a=([0]="X")
+declare -a s=([0]="X")
+declare -a a=([0]="X" [1]="Y")
+declare -a s=([0]="X" [1]="Y")
+declare -a a=([0]="XY")
+declare -a s=([0]="XY")
+f: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
+f1: after: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
+done: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
+f3:1
+f3:2
+f3:3
+f3:4
+f3:5
+f3:6
+f3:7
+f3:8
+f3:9
+f3:10
+f3:11
+f3:12
+f3:13
+f3:14
+f3:15
+f3:16
+f3:17
+f3:18
+f3:19
+f3:20
+before source: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
+varenv15.in: before set: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
+varenv15.in: after set: a b c d e f g h i j k l m n o p q r s t u v w x y z
+after source 1: a b c d e f g h i j k l m n o p q r s t u v w x y z
+varenv15.in: before set: one two three four five six seven eight nine ten
+varenv15.in: after set: a b c d e f g h i j k l m n o p q r s t u v w x y z
+after source 2: a b c d e f g h i j k l m n o p q r s t u v w x y z
+foo=showfoo environment foo=showfoo
+foo=showfoo environment foo=showfoo
+foo=showfoo environment foo=showfoo
+outside: foo=<unset>
+
+posix mode
+foo=showfoo environment foo=showfoo
+outside 1.0: foo=<unset>
+foo=showfoo environment foo=showfoo
+foo=showfoo environment foo=showfoo
+outside 1.1: foo=<unset>
+foo=<unset> environment foo=
+outside 2.0: foo=<unset>
+foo=foo environment foo=foo
+foo=<unset> environment foo=
+outside 2.1: foo=<unset>
+declare -- var="global"
+declare -- var
+declare -- var="local"
+declare -- var="global"
+declare -- var="local"
+declare -- var
+declare -- var="local"
+declare -- var
+declare -- var="local"
+declare -- var
+declare -- var="local"
+declare -- var="f1"
+declare -- var="local"
+declare -a arr=([0]="zero" [1]="one" [2]="two" [3]="three" [4]="four" [5]="five")
+declare -a arr=([0]="zero" [1]="one" [2]="two")
+declare -a arr=([0]="three" [1]="four" [2]="five")
+declare -a arr=([0]="zero" [1]="one" [2]="two")
+ddd 0
+aaa 1 2 3
+bbb 4 5 6
+ccc 7 8 9
+declare -a x=([0]="one" [1]="two" [2]="three")
+./varenv19.sub: line 51: declare: x: not found
+declare -x v="x"
+declare -x v="t"
+declare -- v
+declare -x v
+ignoreeof      	on
+ignoreeof      	off
+ignoreeof      	on
+10
+match 1
+a=z
+a=b
+a=z
diff --git a/tests/varenv.tests b/tests/varenv.tests
new file mode 100644
index 0000000..b058ed4
--- /dev/null
+++ b/tests/varenv.tests
@@ -0,0 +1,264 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+#
+# varenv.sh
+#
+# Test the behavior of the shell with respect to variable and environment
+# assignments
+#
+expect()
+{
+	echo expect "$@"
+}
+
+a=1
+b=2
+c=3
+d=4
+e=5
+f=6 g=7 h=8
+
+a=3 b=4 $CHMOD $MODE $FN
+
+# This should echo "3 4" according to Posix.2
+expect "3 4"
+echo $a $b
+
+set -k
+
+# Assignment statements made when no words are left affect the shell's
+# environment
+a=5 b=6 $CHMOD c=7 $MODE d=8 $FN e=9
+
+expect "5 6 7 8 9"
+echo $a $b $c $d $e
+
+$CHMOD f=7 $MODE g=8 $FN h=9
+expect "7 8 9"
+echo $f $g $h
+
+set +k
+
+# The temporary environment does not affect variable expansion, only the
+# environment given to the command
+
+export HOME=/usr/chet
+expect $HOME
+echo $HOME
+
+expect $HOME
+HOME=/a/b/c /bin/echo $HOME
+
+expect $HOME
+echo $HOME
+
+# This should echo /a/b/c
+expect /a/b/c
+HOME=/a/b/c printenv HOME
+
+set -k
+
+# This should echo $HOME 9, NOT /a/b/c 9
+
+expect "$HOME"
+HOME=/a/b/c /bin/echo $HOME c=9
+expect "$HOME 7"
+echo $HOME $c
+
+# I claim the next two echo calls should give identical output.
+# ksh agrees, the System V.3 sh does not
+
+expect "/a/b/c 9 /a/b/c"
+HOME=/a/b/c $ECHO a=$HOME c=9
+echo $HOME $c $a
+
+expect "/a/b/c 9 /a/b/c"
+HOME=/a/b/c a=$HOME c=9
+echo $HOME $c $a
+set +k
+
+# How do assignment statements affect subsequent assignments on the same
+# line?
+expect "/a/b/c /a/b/c"
+HOME=/a/b/c a=$HOME
+echo $HOME $a
+
+# The system V.3 sh does this wrong; the last echo should output "1 1",
+# but the system V.3 sh has it output "2 2".  Posix.2 says the assignment
+# statements are processed left-to-right.  bash and ksh output the right
+# thing
+c=1
+d=2
+expect "1 2"
+echo $c $d
+d=$c c=$d
+expect "1 1"
+echo $c $d
+
+# just for completeness
+unset d c
+expect unset
+echo ${d-unset}
+
+# no output
+export a
+a=bcde
+export a
+/bin/true 2>/dev/null
+
+func()
+{
+	local YYZ
+
+	YYZ="song by rush"
+	echo $YYZ
+	echo $A
+}
+
+YYZ="toronto airport"
+A="AVAR"
+echo $YYZ
+echo $A
+A=BVAR func
+echo $YYZ
+echo $A
+
+export A
+# Make sure expansion doesn't use assignment statements preceding a builtin
+A=ZVAR echo $A
+
+XPATH=/bin:/usr/bin:/usr/local/bin:.
+func2()
+{
+	local z=yy
+	local -a avar=( ${XPATH//: } )
+	echo ${avar[@]}
+	local
+}
+
+avar=42
+echo $avar
+func2
+echo $avar
+
+# try to set an attribute for an unset variable; make sure it persists
+# when the variable is assigned a value
+declare -i ivar
+
+ivar=10
+
+declare -p ivar
+unset ivar
+
+# export an unset variable, make sure it is not suddenly set, but make
+# sure the export attribute persists when the variable is assigned a
+# value
+export ivar
+echo ${ivar-unset}
+
+ivar=42
+declare -p ivar
+
+# make sure set [-+]o ignoreeof and $IGNOREEOF are reflected
+unset IGNOREEOF
+set +o ignoreeof
+set -o ignoreeof
+if [ "$IGNOREEOF" -ne 10 ]; then
+	echo "./varenv.sh: set -o ignoreeof is not reflected in IGNOREEOF" >&2
+fi
+unset IGNOREEOF
+set +o ignoreeof
+
+# older versions of bash used to not reset RANDOM in subshells correctly
+[[ $RANDOM -eq $(echo $RANDOM) ]] && echo "RANDOM: problem with subshells"
+
+# make sure that shopt -o is reflected in $SHELLOPTS
+# first, get rid of things that might be set automatically via shell
+# variables
+set +o posix
+set +o ignoreeof
+set +o monitor
+echo $-
+echo ${SHELLOPTS}
+shopt -so physical
+echo $-
+echo ${SHELLOPTS}
+
+# and make sure it is readonly
+readonly -p | grep SHELLOPTS
+
+# This was an error in bash versions prior to bash-2.04.  The `set -a'
+# should cause the assignment statement that's an argument to typeset
+# to create an exported variable
+unset FOOFOO
+FOOFOO=bar
+set -a
+typeset FOOFOO=abcde
+
+printenv FOOFOO
+
+# test out export behavior of variable assignments preceding builtins and
+# functions
+$THIS_SH ./varenv1.sub
+
+# more tests; bugs in bash up to version 2.05a
+$THIS_SH ./varenv2.sub
+
+# more tests; bugs in bash IFS scoping up through version 4.2
+$THIS_SH ./varenv3.sub
+
+# scoping problems with declare -g through bash-4.2
+${THIS_SH} ./varenv4.sub
+
+# more scoping and declaration problems with -g and arrays through bash-4.2
+${THIS_SH} ./varenv5.sub
+
+# variable scoping in the presence of nameref
+${THIS_SH} ./varenv6.sub
+
+# variable declaration problems with arrays and readonly local variables
+${THIS_SH} ./varenv7.sub
+
+# variable visibility problems with process substitution subshells in
+# redirections
+${THIS_SH} ./varenv8.sub
+
+# make sure that builtins like readonly and export modify local array variables
+# if executed in shell functions, like they modify local scalar variables
+${THIS_SH} ./varenv9.sub
+
+# more tests of unset and local variables with dynamic scoping
+${THIS_SH} ./varenv10.sub
+
+# tests of compound assignments in function scope
+${THIS_SH} ./varenv11.sub
+
+# temporary environment variable propagation and scoping in posix mode
+${THIS_SH} ./varenv12.sub
+
+# temporary environment and invalid shell identifier names
+${THIS_SH} ./varenv13.sub
+
+# localvar_inherit
+${THIS_SH} ./varenv14.sub
+${THIS_SH} ./varenv15.sub
+${THIS_SH} ./varenv16.sub
+${THIS_SH} ./varenv17.sub
+${THIS_SH} ./varenv18.sub
+${THIS_SH} ./varenv19.sub
+${THIS_SH} ./varenv20.sub
+${THIS_SH} ./varenv21.sub
+
+# make sure variable scoping is done right
+tt() { typeset a=b;echo a=$a; };a=z;echo a=$a;tt;echo a=$a
diff --git a/tests/varenv1.sub b/tests/varenv1.sub
new file mode 100644
index 0000000..8def153
--- /dev/null
+++ b/tests/varenv1.sub
@@ -0,0 +1,41 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# test out the export behavior of variable assignments preceding `eval', `.'
+# and shell functions
+
+func()
+{
+	printenv var
+}
+
+export var=10
+echo expect 20
+var=20 eval printenv var
+
+: ${TMPDIR:=/tmp}
+TMPFILE=$TMPDIR/evalsub.$$
+
+rm -f $TMPFILE
+echo 'printenv var' > $TMPFILE
+
+echo expect 30
+var=30 . $TMPFILE
+
+rm -f $TMPFILE
+
+echo expect 40
+var=40 func
+
+echo expect 50
+var=50 command printenv var
diff --git a/tests/varenv10.sub b/tests/varenv10.sub
new file mode 100644
index 0000000..aa0175a
--- /dev/null
+++ b/tests/varenv10.sub
@@ -0,0 +1,59 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+#
+# various tests of unset when applied to variables at different local scopes
+#
+# function unsetting variable at previous local scope, uncovering global
+
+inner()
+{
+    unset res
+    echo ${FUNCNAME}: ${res-res unset}
+    if [[ $1 == "set" ]]; then
+        res[0]="X"
+        res[1]="Y"
+    fi
+}
+
+outer()
+{
+    local res=
+    inner "$1"
+    echo ${FUNCNAME}: "res: ${res[@]}"
+}
+
+echo main: ${res-unset}
+outer set
+echo main: after first call: ${res-unset}
+outer dontset 
+echo main: after second call: ${res-unset}
+
+unset -f outer inner
+unset res
+
+# local scope, unset variable at the same scope as local declaration
+func()
+{
+	typeset x=4
+
+	unset x
+	echo ${FUNCNAME}: ${x:-null or unset}
+}
+
+x=outside
+func
+echo after func: x = $x
+
+unset -f func
+unset x
diff --git a/tests/varenv11.sub b/tests/varenv11.sub
new file mode 100644
index 0000000..638aa2c
--- /dev/null
+++ b/tests/varenv11.sub
@@ -0,0 +1,43 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# couple of errors here
+func()
+{
+	local qux=7
+	local qux=(one two)
+	local what=(zero one two)
+}
+
+readonly qux=42
+func
+
+func2()
+{
+	declare -gA foo=([zero]=zero [one]=one)
+	declare -ga bar=(zero one)
+}
+
+foo=help
+bar=me
+
+func2
+
+declare -p foo bar
+unset foo bar
+func2
+declare -p foo bar
+
+readonly a=7
+a=(1 2 3)
+
diff --git a/tests/varenv12.sub b/tests/varenv12.sub
new file mode 100644
index 0000000..92b3692
--- /dev/null
+++ b/tests/varenv12.sub
@@ -0,0 +1,171 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+set -o posix
+
+fn() { foo=abc : ; typeset +x foo; printenv|grep ^foo=; }
+
+fn
+unset -v foo
+unset -f fn
+
+func1() {
+  var=1
+  var=2 :       # or 'var=2 return', or another special builtin
+  unset -v var
+  echo $FUNCNAME: var = $var
+}
+func2() {
+  func1
+  unset -v var  # bug: fails silently
+}
+func1
+echo ${var+"BUG: still set 1"}
+
+unset var
+func2
+echo ${var+"BUG: still set 2"}
+
+unset -v var
+unset -f func1 func2
+
+fn() { foo=abc : ; typeset +x foo; echo -n 'inside: ' ; declare -p foo; }
+fn
+echo outside:
+declare -p foo
+
+unset -v foo
+unset -f fn
+
+func()
+{
+	var=value declare -x var
+	echo -n 'inside: ' ; declare -p var
+}
+
+var=one
+func
+echo -n 'outside: ' ; declare -p var
+
+unset -v var
+unset -f func
+
+# this will probably change behavior; export shouldn't behave like this when
+# not in posix mode and the sequencing is probably wrong in posix mode. since
+# export is a special builtin, the variable assignment should modify the
+# local variable, as if a standalone assignment statement had been executed
+# (posix modifying "the current execution environment") leaving the global
+# variable unchanged. all shells, including bash, modify the local variable;
+# bash was the only one that propagates the value out to the calling
+# environment, but no longer does so.
+
+func()
+{
+	local var=inside
+	var=value export var
+	echo -n 'inside: ' ; declare -p var
+}
+
+var=outside
+func
+echo -n 'outside: ' ; declare -p var
+
+unset -v var
+unset -f func
+
+func()
+{
+	local var=local
+	var=inside :
+	echo -n 'inside: ' ; declare -p var
+}
+
+var=outside
+func
+echo -n 'outside: ' ; declare -p var
+
+unset -v var
+unset -f func
+
+func()
+{
+	echo -n 'inside func: ' ; echo "var=${var-<unset>}"
+}
+
+unset -v var
+var=one :
+echo -n 'outside 1.0: ' ; echo "var=${var-<unset>}"
+
+unset -v var
+var=one eval ':'
+echo -n 'outside 1.1: ' ; echo "var=${var-<unset>}"
+
+unset -v var
+
+var=two func
+echo -n 'outside 2.0: ' ; echo "var=${var-<unset>}"
+var=global
+var=two func
+echo -n 'outside 2.1: ' ; echo "var=${var-<unset>}"
+
+unset -v var
+unset -f func
+
+func1()
+{
+	var=value export var
+	echo -n 'inside func1: ' ; echo "var=${var-<unset>}"
+}
+
+var=outside
+func1
+echo -n 'outside 3.0: ' ; echo "var=${var-<unset>}"
+
+unset -v var
+unset -f func1
+
+func2()
+{
+	local var=local
+	var=global :
+	echo -n 'inside func2: ' ; echo "var=${var-<unset>}"
+}
+
+var=outside
+func2
+echo -n 'outside 4.0: ' ; echo "var=${var-<unset>}"
+
+unset -v var
+unset -f fecho foo bar
+
+fecho() {
+    echo $var
+}
+
+foo() {
+    local var="foo: bye bye"
+    var="foo: hello world" fecho
+}
+
+bar() {
+    var="bar: hello world" fecho
+}
+
+var=global
+var=outside foo
+echo after foo: var=$var
+var=global
+var=outside bar
+echo after bar: var=$var
+
+unset -v var
diff --git a/tests/varenv13.sub b/tests/varenv13.sub
new file mode 100644
index 0000000..1f837ec
--- /dev/null
+++ b/tests/varenv13.sub
@@ -0,0 +1,36 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+f() { declare -p ${!var*} | grep ^var; declare -p var ; }
+
+var[0]=X var[@]=Y f
+
+unset -f f
+unset -v var
+
+typeset -A var
+
+f() { declare -p ${!var*}; }
+
+var[0]=X var[@]=Y
+f
+
+: ${THIS_SH:=./bash}
+env 'v[0]=help' ${THIS_SH} -c 'printenv "v[0]"'
+
+unset -v var
+
+f() { test -v 'var[0]'; echo $?; }
+var[0]=X f
+
+unset -v var
diff --git a/tests/varenv14.sub b/tests/varenv14.sub
new file mode 100644
index 0000000..091c470
--- /dev/null
+++ b/tests/varenv14.sub
@@ -0,0 +1,46 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# testing framework for local variable inheritance
+
+shopt -s localvar_inherit
+declare -A var
+
+f() { declare var+=([0]=X); declare -p var; }
+f
+
+f() { declare var=([Y]=Y); declare -p var; }; f
+f() { declare var+=([Y]=Y); declare -p var; }; f
+f() { declare var+=(); declare -p var; }; f
+f() { declare var=(); declare -p var; }; f
+
+unset -f f
+unset -v var
+
+declare -a var=( [0]=12 )
+f() { declare -A var+=([0]=X); declare -p var; }
+f
+
+unset -f f
+unset a s
+
+a=(X) s=X
+
+f() { local -a a s; declare -p a s; }
+f
+
+f() { local a+=(Y) s+=(Y); declare -p a s; }
+f
+
+f() { local -a a+=Y s+=Y; declare -p a s; }
+f
diff --git a/tests/varenv15.in b/tests/varenv15.in
new file mode 100644
index 0000000..e635b12
--- /dev/null
+++ b/tests/varenv15.in
@@ -0,0 +1,3 @@
+echo varenv15.in: before set: "$@"
+set -- a b c d e f g h i j k l m n o p q r s t u v w x y z
+echo varenv15.in: after set: "$@"
diff --git a/tests/varenv15.sub b/tests/varenv15.sub
new file mode 100644
index 0000000..4c9ef0e
--- /dev/null
+++ b/tests/varenv15.sub
@@ -0,0 +1,51 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# check saving and restoring positional parameters around function calls
+
+f()
+{
+	echo $FUNCNAME: "$@"
+}
+
+f1()
+{
+	f {1..50}
+	echo $FUNCNAME: after: $@
+}
+
+set -- {1..100}
+
+f1 {1..20}
+echo done: $@
+
+f3()
+{
+	echo $FUNCNAME:$1
+	shift
+	if [ $# -le 0 ]; then
+		return
+	fi
+	f3 "$@"
+}
+
+f3 {1..20}
+
+# now let's try source with and without positional parameters
+
+set -- {1..20}
+echo before source: "$@"
+. ./varenv15.in
+echo after source 1: "$@"
+. ./varenv15.in one two three four five six seven eight nine ten
+echo after source 2: "$@"
diff --git a/tests/varenv16.sub b/tests/varenv16.sub
new file mode 100644
index 0000000..847926c
--- /dev/null
+++ b/tests/varenv16.sub
@@ -0,0 +1,51 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# test whether or not temporary environment assignments are exported
+# in posix mode. works now, posix says it will not work in the future
+
+show2()
+{
+        printf %s "foo=${foo-<unset>}"
+        echo -n ' environment foo='
+        printenv foo || echo
+}
+
+showfoo()
+{
+	local foo
+
+	foo=showfoo show2
+}
+
+unset foo
+showfoo
+foo=foo showfoo
+showfoo
+echo outside: "foo=${foo-<unset>}"
+
+echo ; echo 'posix mode'
+set -o posix
+unset foo
+showfoo
+echo outside 1.0: "foo=${foo-<unset>}"
+foo=foo showfoo
+showfoo
+echo outside 1.1: "foo=${foo-<unset>}"
+
+unset foo
+show2
+echo outside 2.0: "foo=${foo-<unset>}"
+foo=foo show2
+show2
+echo outside 2.1: "foo=${foo-<unset>}"
diff --git a/tests/varenv17.sub b/tests/varenv17.sub
new file mode 100644
index 0000000..1f9278c
--- /dev/null
+++ b/tests/varenv17.sub
@@ -0,0 +1,44 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+# testing -I and local variable inheritance
+var=global
+
+f()
+{
+	local $1 var
+	declare -p var
+
+	var=local
+	declare -p var
+}
+
+declare -I var
+declare -p var
+
+f
+f -I
+unset var
+f
+f -I
+
+f1()
+{
+	var=$FUNCNAME
+
+	f
+	f -I
+}
+
+f1
diff --git a/tests/varenv18.sub b/tests/varenv18.sub
new file mode 100644
index 0000000..4ad7f1a
--- /dev/null
+++ b/tests/varenv18.sub
@@ -0,0 +1,41 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+arr=(zero one two)
+four=four
+
+f()
+{
+	local -a arr=( "${arr[@]}" )
+	arr+=(three four five)
+	declare -p arr
+}
+f
+declare -p arr
+
+f1()
+{
+	local -a arr=(three $four five)
+	declare -p arr
+}
+f1
+
+set -u
+name='arr[@]'
+f2()
+{
+	local -a arr=("${!name}")
+	declare -p arr
+}
+f2
diff --git a/tests/varenv19.sub b/tests/varenv19.sub
new file mode 100644
index 0000000..753f508
--- /dev/null
+++ b/tests/varenv19.sub
@@ -0,0 +1,51 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+# variable attribute inheritance problems without specifying -a or -A
+
+function aaa() {
+        local x='1 2 3'
+        echo "aaa ${x}"
+}
+
+function bbb {
+        local x
+        x=(4 5 6)
+        echo "bbb ${x[*]}"
+}
+
+ccc()
+{
+        local x=(7 8 9)
+        echo "ccc ${x[*]}"
+}
+
+function ddd
+{
+        local -r x='0'
+        echo "ddd ${x}"
+        aaa
+        bbb
+        ccc
+}
+
+ddd
+
+f()
+{
+	local x=(one two three)
+	declare -p x
+}
+f
+declare -p x
diff --git a/tests/varenv2.sub b/tests/varenv2.sub
new file mode 100644
index 0000000..0fde5b2
--- /dev/null
+++ b/tests/varenv2.sub
@@ -0,0 +1,57 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+fff()
+{
+	typeset i=0 x=10
+	echo "|$i|$x|"
+	export x
+	printenv x
+}
+
+fff2()
+{
+	echo "|$x|"
+	export x
+	printenv x
+}
+
+fff3()
+{
+	typeset i=0 x="${x-10}"
+	echo "|$i|$x|"
+}
+
+fff4()
+{
+	typeset i=0 x
+	x="${x-10}"
+	echo "|$i|$x|"
+}
+
+fff5()
+{
+	z=y typeset z
+	echo "|$z|"
+}
+
+fff
+x=10 fff
+x=1 fff
+x=4 fff2
+x=11 fff3
+echo after fff3: x=$x
+x=12 fff4
+
+fff5
+z=42 fff5
diff --git a/tests/varenv20.sub b/tests/varenv20.sub
new file mode 100644
index 0000000..5fba8c4
--- /dev/null
+++ b/tests/varenv20.sub
@@ -0,0 +1,13 @@
+# tests of local variables with the same name as variables passed in the
+# temporary environment
+
+f() { local v=x; local -p; }
+v=t f
+
+f() { local v; declare -p v; }
+v=t f
+
+f() { local v=x; unset v; declare -p v; }
+v=g
+f
+v=t f
diff --git a/tests/varenv21.sub b/tests/varenv21.sub
new file mode 100644
index 0000000..613e475
--- /dev/null
+++ b/tests/varenv21.sub
@@ -0,0 +1,48 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# test behavior of `local -' inside shell functions
+
+IGNOREEOF=0
+shopt -o ignoreeof
+
+f()
+{
+	local -
+	set +o ignoreeof
+	shopt -o ignoreeof
+}
+
+f
+shopt -o ignoreeof
+echo $IGNOREEOF
+
+unset -f f
+
+f()
+{
+	local -
+	set -m -H +B
+	set -u
+}
+
+before="$-|$SHELLOPTS"
+f
+after="$-|$SHELLOPTS"
+
+case "$after" in
+$before)	echo match 1 ;;
+*)		echo bad 1 ;;
+esac
+
+unset -f f
diff --git a/tests/varenv3.sub b/tests/varenv3.sub
new file mode 100644
index 0000000..854e483
--- /dev/null
+++ b/tests/varenv3.sub
@@ -0,0 +1,44 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+oifs=$IFS
+
+inner () {
+#recho inner: "$IFS" >&2
+	echo a/b/c/d
+	exit 0
+}
+
+outer() {
+#recho outer: "$IFS" >&2
+for i in 1; do
+	IFS=/ read m v k a < <(IFS=$oifs inner)
+
+echo $m:$v:$k:$a
+done
+}
+
+outer
+unset m k v a b c d
+
+for j in 1; do
+	IFS=: read a b c d
+done < <(outer)
+
+echo $a-$b-$c-$d
+unset m k v a b c d
+
+IFS=: read a b c d < <(outer)
+
+echo $a:$b:$c:$d
diff --git a/tests/varenv4.sub b/tests/varenv4.sub
new file mode 100644
index 0000000..9735b61
--- /dev/null
+++ b/tests/varenv4.sub
@@ -0,0 +1,71 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+f()
+{
+	local -a v
+	local -a w
+
+	g
+	echo "f: ${v[@]}, ${w[@]}"
+}
+
+g()
+{
+	aux=v
+	declare -ga "$aux=( asdf fdsa )"
+	declare -ga w=( asdf fdsa )
+
+	echo "g: ${v[@]}, ${w[@]}"
+}
+
+f
+echo "FIN: ${v[@]}, ${w[@]}"
+
+unset v w
+unset -f f g
+
+f()
+{
+	local  v
+	local  w
+
+	g
+	echo f: v = $v, w = $w
+}
+
+g()
+{
+	aux=v
+	declare -g w=one
+	declare -g "$aux=two"
+
+	echo g: v = $v, w = $w
+}
+
+f
+echo FIN: v = $v, w = $w
+
+# problem with error return propagation through bash-4.3
+unset -f aaa bbb
+unset unique
+
+aaa() {
+    declare -g -a unique=()
+}
+bbb() {
+    declare -g -A unique=()
+}
+aaa
+bbb
+echo after bbb: $?
diff --git a/tests/varenv5.sub b/tests/varenv5.sub
new file mode 100644
index 0000000..b6eb70c
--- /dev/null
+++ b/tests/varenv5.sub
@@ -0,0 +1,29 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+function foobar {
+   declare -rgA FOOBAR=([foo]=bar)
+   declare -p FOOBAR
+}
+foobar
+declare -p FOOBAR
+
+unset -f foobar
+
+foobar() {
+   declare -rga FOOBAR2=([foo]=bar)
+   declare -p FOOBAR2
+}
+
+foobar
+declare -p FOOBAR2
diff --git a/tests/varenv6.sub b/tests/varenv6.sub
new file mode 100644
index 0000000..8cf21f7
--- /dev/null
+++ b/tests/varenv6.sub
@@ -0,0 +1,41 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+f()
+{
+	local str=F
+	g str
+}
+
+g()
+{
+	local -n ref=$1
+	printf "%s " "$ref"
+	ref=G
+}
+
+str=OUTSIDE;
+f
+
+printf "%s\n" "$str"
+
+unset -f f g
+unset str
+
+f() { local -a arr=(F); g arr; };
+
+g() { local -n ref=$1; printf "%s " "${ref[0]}"; ref=(G); };
+
+arr=(OUTSIDE);
+f;
+printf "%s\n" "${arr[0]}"
diff --git a/tests/varenv7.sub b/tests/varenv7.sub
new file mode 100644
index 0000000..4b25960
--- /dev/null
+++ b/tests/varenv7.sub
@@ -0,0 +1,75 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+foo()
+{
+	local -a myvar=()
+	local -r myvar=0
+
+	echo "${myvar[@]}"
+	declare -p myvar
+}
+
+foo2()
+{
+	local -i myvar=0
+	local -r myvar=1
+
+	echo "${myvar}"
+	declare -p myvar
+}
+
+declare -a outside=()
+declare -r outside
+declare -p outside
+
+outside1=1
+declare -ir outside1
+declare -p outside1
+
+tempenv=foo declare -r tempenv
+echo tempenv = $tempenv
+
+foo
+foo2
+
+tempvar1=foo declare -r tempvar1
+echo ${tempvar1@A}
+
+tempvar2=bar declare -r tempvar2=qux
+echo ${tempvar2@A}
+
+unset foo
+readonly var=outside
+
+func()
+{
+	local var=inside
+	echo "inside: $var"
+}
+
+func
+echo outside: $var
+
+unset -f f
+unset VAR1 VAR2
+export VAR1=abc VAR2=abc
+
+f()
+{
+	local VAR1; local VAR2
+	echo local: ${VAR1-unset1} ${VAR2-unset2}
+	printenv VAR1 ; printenv VAR2
+}
+
+f
diff --git a/tests/varenv8.sub b/tests/varenv8.sub
new file mode 100644
index 0000000..cad2c6e
--- /dev/null
+++ b/tests/varenv8.sub
@@ -0,0 +1,14 @@
+FOO=bar cat  < <(echo $FOO:1; echo $FOO:2)
+echo after: --${FOO}--
+
+unset FOO
+FOO=global
+
+FOO=bar cat  < <(echo $FOO:1; echo $FOO:2)
+echo after: --${FOO}--
+
+unset FOO
+FOO=bar read x  < <(echo -n $FOO:1; echo $FOO:2)
+echo after: --${FOO}--
+echo x = $x
+
diff --git a/tests/varenv9.sub b/tests/varenv9.sub
new file mode 100644
index 0000000..5837aa5
--- /dev/null
+++ b/tests/varenv9.sub
@@ -0,0 +1,79 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+# case 1: readonly modifying local scalar variables
+o1() {
+    local i1 j1
+    readonly i1=$1
+    readonly j1="1 2 3"
+
+    echo "in o1 (readonly modifying local scalars):"
+    declare -p i1
+    declare -p j1
+}
+
+o1 "a b c"
+
+echo after o1:
+declare -p i1 j1
+
+unset i1 j1
+
+# case 2: readonly setting global scalar variables
+o2() {
+    readonly i2=$1
+    readonly j2="1 2 3"
+
+    echo "in o2 (readonly setting global scalars):"
+    declare -p i2
+    declare -p j2
+}
+
+o2 "a b c"
+echo after o2:
+declare -p i2 j2
+
+unset i2 j2
+
+# case 3: readonly modifying local variables, converting to arrays
+o3() {
+    local i3 j3
+    readonly i3=($1)
+    readonly j3=(1 2 3)
+
+    echo "in o3 (readonly modifying locals, converting to arrays):"
+    declare -p i3
+    declare -p j3
+}
+
+o3 "a b c"
+echo after o3:
+declare -p i3 j3
+
+unset i3 j3
+
+# case 4: readonly setting global array variables
+o4() {
+    readonly i4=($1)
+    readonly j4=(1 2 3)
+
+    echo "in o4 (readonly setting global array variables):"
+    declare -p i4
+    declare -p j4
+}
+
+o4 "a b c"
+echo after o4:
+declare -p i4 j4
+
+unset i4 j4
diff --git a/tests/version b/tests/version
new file mode 100644
index 0000000..9ad08f7
--- /dev/null
+++ b/tests/version
@@ -0,0 +1,13 @@
+if (( $UID == 0 )); then
+        echo "${THIS_SH}: the test suite should not be run as root" >&2
+	echo
+fi
+
+echo Testing ${THIS_SH}
+
+echo version: $BASH_VERSION
+echo versinfo: ${BASH_VERSINFO[@]}
+
+echo HOSTTYPE = $HOSTTYPE
+echo OSTYPE = $OSTYPE
+echo MACHTYPE = $MACHTYPE
diff --git a/tests/version.mini b/tests/version.mini
new file mode 100644
index 0000000..637565e
--- /dev/null
+++ b/tests/version.mini
@@ -0,0 +1,13 @@
+if (( $UID == 0 )); then
+        echo "${THIS_SH}: the test suite should not be run as root" >&2
+	echo
+fi
+
+echo Testing ${THIS_SH}
+
+echo version: $BASH_VERSION
+#echo versinfo: ${BASH_VERSINFO[@]}
+
+echo HOSTTYPE = $HOSTTYPE
+echo OSTYPE = $OSTYPE
+echo MACHTYPE = $MACHTYPE
diff --git a/tests/vredir.right b/tests/vredir.right
new file mode 100644
index 0000000..b2c4cc9
--- /dev/null
+++ b/tests/vredir.right
@@ -0,0 +1,100 @@
+10
+foo 1
+foo 2
+foo 3
+bar is a function
+bar () 
+{ 
+    exec {v}> $TMPFILE;
+    echo $v
+}
+./vredir.tests: line 19: v: readonly variable
+./vredir.tests: line 19: v: cannot assign fd to variable
+42
+bar is a function
+bar () 
+{ 
+    exec {v}> $TMPFILE;
+    echo $v
+}
+10
+line 1
+line 2
+line 3
+bar is a function
+bar () 
+{ 
+    exec {v}<<EOF
+line 1
+line 2
+line 3
+EOF
+
+    echo $v
+}
+10
+foo 1
+foo 2
+foo 3
+10
+/bin/bash
+/bin/csh
+/bin/ksh
+/bin/sh
+/bin/tcsh
+/bin/zsh
+oclosev is a function
+oclosev () 
+{ 
+    exec {v}>&-
+}
+iclosev is a function
+iclosev () 
+{ 
+    exec {v}>&-
+}
+/bin/bash
+/bin/csh
+/bin/ksh
+/bin/sh
+/bin/tcsh
+/bin/zsh
+./vredir3.sub: line 4: v: ambiguous redirect
+after
+10 11
+a
+a
+swizzle is a function
+swizzle () 
+{ 
+    fd0=0;
+    fd1=1;
+    exec {stdin}<&$fd0;
+    exec {stdout}>&$fd1
+}
+12 10
+a
+a
+swizzle is a function
+swizzle () 
+{ 
+    exec {fd0}<&0;
+    exec {fd1}>&1;
+    exec {stdin}<&$fd0-;
+    exec {stdout}>&$fd1-
+}
+ok 1
+./vredir6.sub: redirection error: cannot duplicate fd: Invalid argument
+./vredir6.sub: line 13: /dev/null: Invalid argument
+unset
+12 10
+a
+a
+swizzle is a function
+swizzle () 
+{ 
+    exec {fd[0]}<&0;
+    exec {fd[1]}>&1;
+    exec {stdin}<&${fd[0]}-;
+    exec {stdout}>&${fd[1]}-
+}
diff --git a/tests/vredir.tests b/tests/vredir.tests
new file mode 100644
index 0000000..ea59eec
--- /dev/null
+++ b/tests/vredir.tests
@@ -0,0 +1,61 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+: ${TMPDIR:=/var/tmp}
+TMPFILE=$TMPDIR/foo
+
+bar()
+{
+exec {v}>$TMPFILE
+echo $v
+}
+
+bar
+
+echo foo 1 >&$v
+echo foo 2 >&$v
+echo foo 3 >&$v
+
+cat $TMPFILE
+rm -f $TMPFILE
+
+type bar
+exec {v}>&-
+
+readonly v=42
+bar
+
+echo foo 1 2>&1 >&$v | { grep -q '\$v: Bad' || echo 'bad foo 1'; }
+echo foo 2 2>&1 >&$v | { grep -q '\$v: Bad' || echo 'bad foo 2'; }
+echo foo 3 2>&1 >&$v | { grep -q '\$v: Bad' || echo 'bad foo 3'; }
+
+cat $TMPFILE
+rm -f $TMPFILE
+
+type bar
+
+${THIS_SH} ./vredir1.sub
+
+${THIS_SH} ./vredir2.sub
+
+${THIS_SH} ./vredir3.sub
+
+${THIS_SH} ./vredir4.sub
+
+${THIS_SH} ./vredir5.sub
+
+${THIS_SH} ./vredir6.sub
+
+${THIS_SH} ./vredir7.sub
+
+exit 0
diff --git a/tests/vredir1.sub b/tests/vredir1.sub
new file mode 100644
index 0000000..484f313
--- /dev/null
+++ b/tests/vredir1.sub
@@ -0,0 +1,30 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+bar()
+{
+exec {v}<<EOF
+line 1
+line 2
+line 3
+EOF
+echo $v
+}
+
+bar
+
+cat <&$v
+
+type bar
+
+exit 0
diff --git a/tests/vredir2.sub b/tests/vredir2.sub
new file mode 100644
index 0000000..4f9e7bb
--- /dev/null
+++ b/tests/vredir2.sub
@@ -0,0 +1,65 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+: ${TMPDIR:=/var/tmp}
+SHELLSFILE=$TMPDIR/shells-$$
+
+cat > $TMPDIR/shells-$$ <<EOF
+/bin/bash
+/bin/csh
+/bin/ksh
+/bin/sh
+/bin/tcsh
+/bin/zsh
+EOF
+
+oclosev()
+{
+exec {v}>&-
+}
+
+iclosev()
+{
+exec {v}<&-
+}
+
+exec {v}>&1
+echo $v
+
+echo foo 1 >&$v
+echo foo 2 >&$v
+echo foo 3 >&$v
+
+oclosev
+
+exec {v}<$SHELLSFILE
+echo $v
+
+while read line <&$v
+do
+	echo $line
+done
+
+iclosev
+
+type oclosev
+type iclosev
+
+while read -r -u ${fd}
+do
+	echo $REPLY
+done {fd}<$SHELLSFILE
+
+rm -f $SHELLSFILE
+
+exit 0
diff --git a/tests/vredir3.sub b/tests/vredir3.sub
new file mode 100644
index 0000000..358ded2
--- /dev/null
+++ b/tests/vredir3.sub
@@ -0,0 +1,8 @@
+# Right now, the {varname} mechanism does not honor set -u for compatibility
+unset v
+set -u
+exec {v}>&-
+
+echo after
+
+exit 0
diff --git a/tests/vredir4.sub b/tests/vredir4.sub
new file mode 100644
index 0000000..f861bcf
--- /dev/null
+++ b/tests/vredir4.sub
@@ -0,0 +1,35 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+swizzle()
+{
+fd0=0
+fd1=1
+
+exec {stdin}<&$fd0
+exec {stdout}>&$fd1
+}
+
+swizzle
+echo $stdin $stdout
+
+read line <&$stdin <<EOF
+a
+EOF
+
+echo $line
+echo $line >&$stdout
+
+type swizzle
+
+exit 0
diff --git a/tests/vredir5.sub b/tests/vredir5.sub
new file mode 100644
index 0000000..beb45ac
--- /dev/null
+++ b/tests/vredir5.sub
@@ -0,0 +1,36 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+swizzle()
+{
+exec {fd0}<&0
+exec {fd1}>&1
+
+exec {stdin}<&$fd0-
+exec {stdout}>&$fd1-
+}
+
+swizzle
+
+echo $stdin $stdout
+
+read line <&$stdin <<EOF
+a
+EOF
+
+echo $line
+echo $line >&$stdout
+
+type swizzle
+
+exit 0
diff --git a/tests/vredir6.sub b/tests/vredir6.sub
new file mode 100644
index 0000000..224b96a
--- /dev/null
+++ b/tests/vredir6.sub
@@ -0,0 +1,14 @@
+unset v
+exec {v}</dev/null
+
+if (( v >= 10 )); then echo ok 1; else echo bad 1; fi
+
+exec {v}<&-
+
+ulimit -n 6
+
+exec </dev/null
+
+unset v
+exec {v}</dev/null
+echo ${v-unset}
diff --git a/tests/vredir7.sub b/tests/vredir7.sub
new file mode 100644
index 0000000..0f76f40
--- /dev/null
+++ b/tests/vredir7.sub
@@ -0,0 +1,36 @@
+#   This program is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation, either version 3 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+swizzle()
+{
+exec {fd[0]}<&0
+exec {fd[1]}>&1
+
+exec {stdin}<&${fd[0]}-
+exec {stdout}>&${fd[1]}-
+}
+
+swizzle
+
+echo $stdin $stdout
+
+read line <&$stdin <<EOF
+a
+EOF
+
+echo $line
+echo $line >&$stdout
+
+type swizzle
+
+exit 0
diff --git a/trap.c b/trap.c
new file mode 100644
index 0000000..c7f8ded
--- /dev/null
+++ b/trap.c
@@ -0,0 +1,1453 @@
+/* trap.c -- Not the trap command, but useful functions for manipulating
+   those objects.  The trap command is in builtins/trap.def. */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include "bashtypes.h"
+#include "bashansi.h"
+
+#include <stdio.h>
+#include <errno.h>
+
+#include "bashintl.h"
+
+#include <signal.h>
+
+#include "trap.h"
+
+#include "shell.h"
+#include "execute_cmd.h"
+#include "flags.h"
+#include "parser.h"
+#include "input.h"	/* for save_token_state, restore_token_state */
+#include "jobs.h"
+#include "signames.h"
+#include "builtins.h"
+#include "builtins/common.h"
+#include "builtins/builtext.h"
+
+#if defined (READLINE)
+#  include <readline/readline.h>
+#  include "bashline.h"
+#endif
+
+#ifndef errno
+extern int errno;
+#endif
+
+/* Flags which describe the current handling state of a signal. */
+#define SIG_INHERITED   0x0	/* Value inherited from parent. */
+#define SIG_TRAPPED     0x1	/* Currently trapped. */
+#define SIG_HARD_IGNORE 0x2	/* Signal was ignored on shell entry. */
+#define SIG_SPECIAL     0x4	/* Treat this signal specially. */
+#define SIG_NO_TRAP     0x8	/* Signal cannot be trapped. */
+#define SIG_INPROGRESS	0x10	/* Signal handler currently executing. */
+#define SIG_CHANGED	0x20	/* Trap value changed in trap handler. */
+#define SIG_IGNORED	0x40	/* The signal is currently being ignored. */
+
+#define SPECIAL_TRAP(s)	((s) == EXIT_TRAP || (s) == DEBUG_TRAP || (s) == ERROR_TRAP || (s) == RETURN_TRAP)
+
+/* An array of such flags, one for each signal, describing what the
+   shell will do with a signal.  DEBUG_TRAP == NSIG; some code below
+   assumes this. */
+static int sigmodes[BASH_NSIG];
+
+static void free_trap_command (int);
+static void change_signal (int, char *);
+
+static int _run_trap_internal (int, char *);
+
+static void free_trap_string (int);
+static void reset_signal (int);
+static void restore_signal (int);
+static void reset_or_restore_signal_handlers (sh_resetsig_func_t *);
+
+static void trap_if_untrapped (int, char *);
+
+/* Variables used here but defined in other files. */
+extern procenv_t alrmbuf;
+
+extern volatile int from_return_trap;
+extern int waiting_for_child;
+
+extern WORD_LIST *subst_assign_varlist;
+
+/* The list of things to do originally, before we started trapping. */
+SigHandler *original_signals[NSIG];
+
+/* For each signal, a slot for a string, which is a command to be
+   executed when that signal is received.  The slot can also contain
+   DEFAULT_SIG, which means do whatever you were going to do before
+   you were so rudely interrupted, or IGNORE_SIG, which says ignore
+   this signal. */
+char *trap_list[BASH_NSIG];
+
+/* A bitmap of signals received for which we have trap handlers. */
+int pending_traps[NSIG];
+
+/* Set to the number of the signal we're running the trap for + 1.
+   Used in execute_cmd.c and builtins/common.c to clean up when
+   parse_and_execute does not return normally after executing the
+   trap command (e.g., when `return' is executed in the trap command). */
+int running_trap;
+
+/* Set to last_command_exit_value before running a trap. */
+int trap_saved_exit_value;
+
+/* The (trapped) signal received while executing in the `wait' builtin */
+int wait_signal_received;
+
+int trapped_signal_received;
+
+/* Set to 1 to suppress the effect of `set v' in the DEBUG trap. */
+int suppress_debug_trap_verbose = 0;
+
+#define GETORIGSIG(sig) \
+  do { \
+    original_signals[sig] = (SigHandler *)set_signal_handler (sig, SIG_DFL); \
+    set_signal_handler (sig, original_signals[sig]); \
+    if (original_signals[sig] == SIG_IGN) \
+      sigmodes[sig] |= SIG_HARD_IGNORE; \
+  } while (0)
+
+#define SETORIGSIG(sig,handler) \
+  do { \
+    original_signals[sig] = handler; \
+    if (original_signals[sig] == SIG_IGN) \
+      sigmodes[sig] |= SIG_HARD_IGNORE; \
+  } while (0)
+
+#define GET_ORIGINAL_SIGNAL(sig) \
+  if (sig && sig < NSIG && original_signals[sig] == IMPOSSIBLE_TRAP_HANDLER) \
+    GETORIGSIG(sig)
+
+void
+initialize_traps ()
+{
+  register int i;
+
+  initialize_signames();
+
+  trap_list[EXIT_TRAP] = trap_list[DEBUG_TRAP] = trap_list[ERROR_TRAP] = trap_list[RETURN_TRAP] = (char *)NULL;
+  sigmodes[EXIT_TRAP] = sigmodes[DEBUG_TRAP] = sigmodes[ERROR_TRAP] = sigmodes[RETURN_TRAP] = SIG_INHERITED;
+  original_signals[EXIT_TRAP] = IMPOSSIBLE_TRAP_HANDLER;
+
+  for (i = 1; i < NSIG; i++)
+    {
+      pending_traps[i] = 0;
+      trap_list[i] = (char *)DEFAULT_SIG;
+      sigmodes[i] = SIG_INHERITED;	/* XXX - only set, not used */
+      original_signals[i] = IMPOSSIBLE_TRAP_HANDLER;
+    }
+
+  /* Show which signals are treated specially by the shell. */
+#if defined (SIGCHLD)
+  GETORIGSIG (SIGCHLD);
+  sigmodes[SIGCHLD] |= (SIG_SPECIAL | SIG_NO_TRAP);
+#endif /* SIGCHLD */
+
+  GETORIGSIG (SIGINT);
+  sigmodes[SIGINT] |= SIG_SPECIAL;
+
+#if defined (__BEOS__)
+  /* BeOS sets SIGINT to SIG_IGN! */
+  original_signals[SIGINT] = SIG_DFL;
+  sigmodes[SIGINT] &= ~SIG_HARD_IGNORE;
+#endif
+
+  GETORIGSIG (SIGQUIT);
+  sigmodes[SIGQUIT] |= SIG_SPECIAL;
+
+  if (interactive)
+    {
+      GETORIGSIG (SIGTERM);
+      sigmodes[SIGTERM] |= SIG_SPECIAL;
+    }
+
+  get_original_tty_job_signals ();
+}
+
+#ifdef DEBUG
+/* Return a printable representation of the trap handler for SIG. */
+static char *
+trap_handler_string (sig)
+     int sig;
+{
+  if (trap_list[sig] == (char *)DEFAULT_SIG)
+    return "DEFAULT_SIG";
+  else if (trap_list[sig] == (char *)IGNORE_SIG)
+    return "IGNORE_SIG";
+  else if (trap_list[sig] == (char *)IMPOSSIBLE_TRAP_HANDLER)
+    return "IMPOSSIBLE_TRAP_HANDLER";
+  else if (trap_list[sig])
+    return trap_list[sig];
+  else
+    return "NULL";
+}
+#endif
+
+/* Return the print name of this signal. */
+char *
+signal_name (sig)
+     int sig;
+{
+  char *ret;
+
+  /* on cygwin32, signal_names[sig] could be null */
+  ret = (sig >= BASH_NSIG || sig < 0 || signal_names[sig] == NULL)
+	? _("invalid signal number")
+	: signal_names[sig];
+
+  return ret;
+}
+
+/* Turn a string into a signal number, or a number into
+   a signal number.  If STRING is "2", "SIGINT", or "INT",
+   then (int)2 is returned.  Return NO_SIG if STRING doesn't
+   contain a valid signal descriptor. */
+int
+decode_signal (string, flags)
+     char *string;
+     int flags;
+{
+  intmax_t sig;
+  char *name;
+
+  if (legal_number (string, &sig))
+    return ((sig >= 0 && sig < NSIG) ? (int)sig : NO_SIG);
+
+#if defined (SIGRTMIN) && defined (SIGRTMAX)
+  if (STREQN (string, "SIGRTMIN+", 9) || ((flags & DSIG_NOCASE) && strncasecmp (string, "SIGRTMIN+", 9) == 0))
+    {
+      if (legal_number (string+9, &sig) && sig >= 0 && sig <= SIGRTMAX - SIGRTMIN)
+	return (SIGRTMIN + sig);
+      else
+	return NO_SIG;
+    }
+  else if (STREQN (string, "RTMIN+", 6) || ((flags & DSIG_NOCASE) && strncasecmp (string, "RTMIN+", 6) == 0))
+    {
+      if (legal_number (string+6, &sig) && sig >= 0 && sig <= SIGRTMAX - SIGRTMIN)
+	return (SIGRTMIN + sig);
+      else
+	return NO_SIG;
+    }
+#endif /* SIGRTMIN && SIGRTMAX */
+
+  /* A leading `SIG' may be omitted. */
+  for (sig = 0; sig < BASH_NSIG; sig++)
+    {
+      name = signal_names[sig];
+      if (name == 0 || name[0] == '\0')
+	continue;
+
+      /* Check name without the SIG prefix first case sensitively or
+	 insensitively depending on whether flags includes DSIG_NOCASE */
+      if (STREQN (name, "SIG", 3))
+	{
+	  name += 3;
+
+	  if ((flags & DSIG_NOCASE) && strcasecmp (string, name) == 0)
+	    return ((int)sig);
+	  else if ((flags & DSIG_NOCASE) == 0 && strcmp (string, name) == 0)
+	    return ((int)sig);
+	  /* If we can't use the `SIG' prefix to match, punt on this
+	     name now. */
+	  else if ((flags & DSIG_SIGPREFIX) == 0)
+	    continue;
+	}
+
+      /* Check name with SIG prefix case sensitively or insensitively
+	 depending on whether flags includes DSIG_NOCASE */
+      name = signal_names[sig];
+      if ((flags & DSIG_NOCASE) && strcasecmp (string, name) == 0)
+	return ((int)sig);
+      else if ((flags & DSIG_NOCASE) == 0 && strcmp (string, name) == 0)
+	return ((int)sig);
+    }
+
+  return (NO_SIG);
+}
+
+/* Non-zero when we catch a trapped signal. */
+static int catch_flag;
+
+void
+run_pending_traps ()
+{
+  register int sig;
+  int old_exit_value, x;
+  int old_running;
+  WORD_LIST *save_subst_varlist;
+  HASH_TABLE *save_tempenv;
+  sh_parser_state_t pstate;
+#if defined (ARRAY_VARS)
+  ARRAY *ps;
+#endif
+
+  if (catch_flag == 0)		/* simple optimization */
+    return;
+
+  if (running_trap > 0)
+    {
+#if defined (DEBUG)
+      internal_warning ("run_pending_traps: recursive invocation while running trap for signal %d", running_trap-1);
+#endif
+#if defined (SIGWINCH)
+      if (running_trap == SIGWINCH+1 && pending_traps[SIGWINCH])
+	return;			/* no recursive SIGWINCH trap invocations */
+#endif
+      /* could check for running the trap handler for the same signal here
+	 (running_trap == sig+1) */
+      if (evalnest_max > 0 && evalnest > evalnest_max)
+	{
+	  internal_error (_("trap handler: maximum trap handler level exceeded (%d)"), evalnest_max);
+	  evalnest = 0;
+	  jump_to_top_level (DISCARD);
+	}
+    }
+
+  catch_flag = trapped_signal_received = 0;
+
+  /* Preserve $? when running trap. */
+  trap_saved_exit_value = old_exit_value = last_command_exit_value;
+#if defined (ARRAY_VARS)
+  ps = save_pipestatus_array ();
+#endif
+  old_running = running_trap;
+
+  for (sig = 1; sig < NSIG; sig++)
+    {
+      /* XXX this could be made into a counter by using
+	 while (pending_traps[sig]--) instead of the if statement. */
+      if (pending_traps[sig])
+	{
+	  if (running_trap == sig+1)
+	    /*continue*/;
+
+	  running_trap = sig + 1;
+
+	  if (sig == SIGINT)
+	    {
+	      pending_traps[sig] = 0;	/* XXX */
+	      /* We don't modify evalnest here, since run_interrupt_trap() calls
+		 _run_trap_internal, which does. */
+	      run_interrupt_trap (0);
+	      CLRINTERRUPT;	/* interrupts don't stack */
+	    }
+#if defined (JOB_CONTROL) && defined (SIGCHLD)
+	  else if (sig == SIGCHLD &&
+		   trap_list[SIGCHLD] != (char *)IMPOSSIBLE_TRAP_HANDLER &&
+		   (sigmodes[SIGCHLD] & SIG_INPROGRESS) == 0)
+	    {
+	      sigmodes[SIGCHLD] |= SIG_INPROGRESS;
+	      /* We modify evalnest here even though run_sigchld_trap can run
+		 the trap action more than once */
+	      evalnest++;
+	      x = pending_traps[sig];
+	      pending_traps[sig] = 0;
+	      run_sigchld_trap (x);	/* use as counter */
+	      running_trap = 0;
+	      evalnest--;
+	      sigmodes[SIGCHLD] &= ~SIG_INPROGRESS;
+	      /* continue here rather than reset pending_traps[SIGCHLD] below in
+		 case there are recursive calls to run_pending_traps and children
+		 have been reaped while run_sigchld_trap was running. */
+	      continue;
+	    }
+	  else if (sig == SIGCHLD &&
+		   trap_list[SIGCHLD] == (char *)IMPOSSIBLE_TRAP_HANDLER &&
+		   (sigmodes[SIGCHLD] & SIG_INPROGRESS) != 0)
+	    {
+	      /* This can happen when run_pending_traps is called while
+		 running a SIGCHLD trap handler. */
+	      running_trap = 0;
+	      /* want to leave pending_traps[SIGCHLD] alone here */
+	      continue;					/* XXX */
+	    }
+	  else if (sig == SIGCHLD && (sigmodes[SIGCHLD] & SIG_INPROGRESS))
+	    {
+	      /* whoops -- print warning? */
+	      running_trap = 0;		/* XXX */
+	      /* want to leave pending_traps[SIGCHLD] alone here */
+	      continue;
+	    }
+#endif
+	  else if (trap_list[sig] == (char *)DEFAULT_SIG ||
+		   trap_list[sig] == (char *)IGNORE_SIG ||
+		   trap_list[sig] == (char *)IMPOSSIBLE_TRAP_HANDLER)
+	    {
+	      /* This is possible due to a race condition.  Say a bash
+		 process has SIGTERM trapped.  A subshell is spawned
+		 using { list; } & and the parent does something and kills
+		 the subshell with SIGTERM.  It's possible for the subshell
+		 to set pending_traps[SIGTERM] to 1 before the code in
+		 execute_cmd.c eventually calls restore_original_signals
+		 to reset the SIGTERM signal handler in the subshell.  The
+		 next time run_pending_traps is called, pending_traps[SIGTERM]
+		 will be 1, but the trap handler in trap_list[SIGTERM] will
+		 be invalid (probably DEFAULT_SIG, but it could be IGNORE_SIG).
+		 Unless we catch this, the subshell will dump core when
+		 trap_list[SIGTERM] == DEFAULT_SIG, because DEFAULT_SIG is
+		 usually 0x0. */
+	      internal_warning (_("run_pending_traps: bad value in trap_list[%d]: %p"),
+				sig, trap_list[sig]);
+	      if (trap_list[sig] == (char *)DEFAULT_SIG)
+		{
+		  internal_warning (_("run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"), sig, signal_name (sig));
+		  kill (getpid (), sig);
+		}
+	    }
+	  else
+	    {
+	      /* XXX - should we use save_parser_state/restore_parser_state? */
+	      save_parser_state (&pstate);
+	      save_subst_varlist = subst_assign_varlist;
+	      subst_assign_varlist = 0;
+	      save_tempenv = temporary_env;
+	      temporary_env = 0;	/* traps should not run with temporary env */
+
+#if defined (JOB_CONTROL)
+	      save_pipeline (1);	/* XXX only provides one save level */
+#endif
+	      /* XXX - set pending_traps[sig] = 0 here? */
+	      pending_traps[sig] = 0;
+	      evalnest++;
+	      evalstring (savestring (trap_list[sig]), "trap", SEVAL_NONINT|SEVAL_NOHIST|SEVAL_RESETLINE);
+	      evalnest--;
+#if defined (JOB_CONTROL)
+	      restore_pipeline (1);
+#endif
+
+	      subst_assign_varlist = save_subst_varlist;
+	      restore_parser_state (&pstate);
+	      temporary_env = save_tempenv;
+	    }
+
+	  pending_traps[sig] = 0;	/* XXX - move before evalstring? */
+	  running_trap = old_running;
+	}
+    }
+
+#if defined (ARRAY_VARS)
+  restore_pipestatus_array (ps);
+#endif
+  last_command_exit_value = old_exit_value;
+}
+
+/* Set the private state variables noting that we received a signal SIG
+   for which we have a trap set. */
+void
+set_trap_state (sig)
+     int sig;
+{
+  catch_flag = 1;
+  pending_traps[sig]++;
+  trapped_signal_received = sig;
+}
+    
+sighandler
+trap_handler (sig)
+     int sig;
+{
+  int oerrno;
+
+  if ((sigmodes[sig] & SIG_TRAPPED) == 0)
+    {
+#if defined (DEBUG)
+      internal_warning ("trap_handler: signal %d: signal not trapped", sig);
+#endif
+      SIGRETURN (0);
+    }
+
+  if ((sig >= NSIG) ||
+      (trap_list[sig] == (char *)DEFAULT_SIG) ||
+      (trap_list[sig] == (char *)IGNORE_SIG))
+    programming_error (_("trap_handler: bad signal %d"), sig);
+  else
+    {
+      oerrno = errno;
+#if defined (MUST_REINSTALL_SIGHANDLERS)
+#  if defined (JOB_CONTROL) && defined (SIGCHLD)
+      if (sig != SIGCHLD)
+#  endif /* JOB_CONTROL && SIGCHLD */
+      set_signal_handler (sig, trap_handler);
+#endif /* MUST_REINSTALL_SIGHANDLERS */
+
+      set_trap_state (sig);
+
+      if (this_shell_builtin && (this_shell_builtin == wait_builtin))
+	{
+	  wait_signal_received = sig;
+	  if (waiting_for_child && wait_intr_flag)
+	    sh_longjmp (wait_intr_buf, 1);
+	}
+
+#if defined (READLINE)
+      /* Set the event hook so readline will call it after the signal handlers
+	 finish executing, so if this interrupted character input we can get
+	 quick response. */
+      if (RL_ISSTATE (RL_STATE_SIGHANDLER))
+        bashline_set_event_hook ();
+#endif
+
+      errno = oerrno;
+    }
+  
+  SIGRETURN (0);
+}
+
+int
+next_pending_trap (start)
+     int start;
+{
+  register int i;
+
+  for (i = start; i < NSIG; i++)
+    if (pending_traps[i])
+      return i;
+  return -1;
+}
+
+int
+first_pending_trap ()
+{
+  return (next_pending_trap (1));
+}
+
+/* Return > 0 if any of the "real" signals (not fake signals like EXIT) are
+   trapped. */
+int
+any_signals_trapped ()
+{
+  register int i;
+
+  for (i = 1; i < NSIG; i++)
+    if (sigmodes[i] & SIG_TRAPPED)
+      return i;
+  return -1;
+}
+
+void
+clear_pending_traps ()
+{
+  register int i;
+
+  for (i = 1; i < NSIG; i++)
+    pending_traps[i] = 0;
+}
+
+void
+check_signals ()
+{
+  CHECK_ALRM;		/* set by the read builtin */
+  QUIT;
+}
+
+/* Convenience functions the rest of the shell can use */
+void
+check_signals_and_traps ()
+{
+  check_signals ();
+
+  run_pending_traps ();
+}
+
+#if defined (JOB_CONTROL) && defined (SIGCHLD)
+
+#ifdef INCLUDE_UNUSED
+/* Make COMMAND_STRING be executed when SIGCHLD is caught. */
+void
+set_sigchld_trap (command_string)
+     char *command_string;
+{
+  set_signal (SIGCHLD, command_string);
+}
+#endif
+
+/* Make COMMAND_STRING be executed when SIGCHLD is caught iff SIGCHLD
+   is not already trapped.  IMPOSSIBLE_TRAP_HANDLER is used as a sentinel
+   to make sure that a SIGCHLD trap handler run via run_sigchld_trap can
+   reset the disposition to the default and not have the original signal
+   accidentally restored, undoing the user's command. */
+void
+maybe_set_sigchld_trap (command_string)
+     char *command_string;
+{
+  if ((sigmodes[SIGCHLD] & SIG_TRAPPED) == 0 && trap_list[SIGCHLD] == (char *)IMPOSSIBLE_TRAP_HANDLER)
+    set_signal (SIGCHLD, command_string);
+}
+
+/* Temporarily set the SIGCHLD trap string to IMPOSSIBLE_TRAP_HANDLER.  Used
+   as a sentinel in run_sigchld_trap and maybe_set_sigchld_trap to see whether
+   or not a SIGCHLD trap handler reset SIGCHLD disposition to the default. */
+void
+set_impossible_sigchld_trap ()
+{
+  restore_default_signal (SIGCHLD);
+  change_signal (SIGCHLD, (char *)IMPOSSIBLE_TRAP_HANDLER);
+  sigmodes[SIGCHLD] &= ~SIG_TRAPPED;	/* maybe_set_sigchld_trap checks this */
+}
+
+/* Act as if we received SIGCHLD NCHILD times and increment
+   pending_traps[SIGCHLD] by that amount.  This allows us to still run the
+   SIGCHLD trap once for each exited child. */
+void
+queue_sigchld_trap (nchild)
+     int nchild;
+{
+  if (nchild > 0)
+    {
+      catch_flag = 1;
+      pending_traps[SIGCHLD] += nchild;
+      trapped_signal_received = SIGCHLD;
+    }
+}
+#endif /* JOB_CONTROL && SIGCHLD */
+
+/* Set a trap for SIG only if SIG is not already trapped. */
+static inline void
+trap_if_untrapped (sig, command)
+     int sig;
+     char *command;
+{
+  if ((sigmodes[sig] & SIG_TRAPPED) == 0)
+    set_signal (sig, command);
+}
+
+void
+set_debug_trap (command)
+     char *command;
+{
+  set_signal (DEBUG_TRAP, command);
+}
+
+/* Separate function to call when functions and sourced files want to restore
+   the original version of the DEBUG trap before returning.  Unless the -T
+   option is set, source and shell function execution save the old debug trap
+   and unset the trap.  If the function or sourced file changes the DEBUG trap,
+   SIG_TRAPPED will be set and we don't bother restoring the original trap string.
+   This is used by both functions and the source builtin. */
+void
+maybe_set_debug_trap (command)
+     char *command;
+{
+  trap_if_untrapped (DEBUG_TRAP, command);
+}
+
+void
+set_error_trap (command)
+     char *command;
+{
+  set_signal (ERROR_TRAP, command);
+}
+
+void
+maybe_set_error_trap (command)
+     char *command;
+{
+  trap_if_untrapped (ERROR_TRAP, command);
+}
+
+void
+set_return_trap (command)
+     char *command;
+{
+  set_signal (RETURN_TRAP, command);
+}
+
+void
+maybe_set_return_trap (command)
+     char *command;
+{
+  trap_if_untrapped (RETURN_TRAP, command);
+}
+
+#ifdef INCLUDE_UNUSED
+void
+set_sigint_trap (command)
+     char *command;
+{
+  set_signal (SIGINT, command);
+}
+#endif
+
+/* Reset the SIGINT handler so that subshells that are doing `shellsy'
+   things, like waiting for command substitution or executing commands
+   in explicit subshells ( ( cmd ) ), can catch interrupts properly. */
+SigHandler *
+set_sigint_handler ()
+{
+  if (sigmodes[SIGINT] & SIG_HARD_IGNORE)
+    return ((SigHandler *)SIG_IGN);
+
+  else if (sigmodes[SIGINT] & SIG_IGNORED)
+    return ((SigHandler *)set_signal_handler (SIGINT, SIG_IGN)); /* XXX */
+
+  else if (sigmodes[SIGINT] & SIG_TRAPPED)
+    return ((SigHandler *)set_signal_handler (SIGINT, trap_handler));
+
+  /* The signal is not trapped, so set the handler to the shell's special
+     interrupt handler. */
+  else if (interactive)	/* XXX - was interactive_shell */
+    return (set_signal_handler (SIGINT, sigint_sighandler));
+  else
+    return (set_signal_handler (SIGINT, termsig_sighandler));
+}
+
+/* Return the correct handler for signal SIG according to the values in
+   sigmodes[SIG]. */
+SigHandler *
+trap_to_sighandler (sig)
+     int sig;
+{
+  if (sigmodes[sig] & (SIG_IGNORED|SIG_HARD_IGNORE))
+    return (SIG_IGN);
+  else if (sigmodes[sig] & SIG_TRAPPED)
+    return (trap_handler);
+  else
+    return (SIG_DFL);
+}
+
+/* Set SIG to call STRING as a command. */
+void
+set_signal (sig, string)
+     int sig;
+     char *string;
+{
+  sigset_t set, oset;
+
+  if (SPECIAL_TRAP (sig))
+    {
+      change_signal (sig, savestring (string));
+      if (sig == EXIT_TRAP && interactive == 0)
+	initialize_terminating_signals ();
+      return;
+    }
+
+  /* A signal ignored on entry to the shell cannot be trapped or reset, but
+     no error is reported when attempting to do so.  -- Posix.2 */
+  if (sigmodes[sig] & SIG_HARD_IGNORE)
+    return;
+
+  /* Make sure we have original_signals[sig] if the signal has not yet
+     been trapped. */
+  if ((sigmodes[sig] & SIG_TRAPPED) == 0)
+    {
+      /* If we aren't sure of the original value, check it. */
+      if (original_signals[sig] == IMPOSSIBLE_TRAP_HANDLER)
+        GETORIGSIG (sig);
+      if (original_signals[sig] == SIG_IGN)
+	return;
+    }
+
+  /* Only change the system signal handler if SIG_NO_TRAP is not set.
+     The trap command string is changed in either case.  The shell signal
+     handlers for SIGINT and SIGCHLD run the user specified traps in an
+     environment in which it is safe to do so. */
+  if ((sigmodes[sig] & SIG_NO_TRAP) == 0)
+    {
+      BLOCK_SIGNAL (sig, set, oset);
+      change_signal (sig, savestring (string));
+      set_signal_handler (sig, trap_handler);
+      UNBLOCK_SIGNAL (oset);
+    }
+  else
+    change_signal (sig, savestring (string));
+}
+
+static void
+free_trap_command (sig)
+     int sig;
+{
+  if ((sigmodes[sig] & SIG_TRAPPED) && trap_list[sig] &&
+      (trap_list[sig] != (char *)IGNORE_SIG) &&
+      (trap_list[sig] != (char *)DEFAULT_SIG) &&
+      (trap_list[sig] != (char *)IMPOSSIBLE_TRAP_HANDLER))
+    free (trap_list[sig]);
+}
+
+/* If SIG has a string assigned to it, get rid of it.  Then give it
+   VALUE. */
+static void
+change_signal (sig, value)
+     int sig;
+     char *value;
+{
+  if ((sigmodes[sig] & SIG_INPROGRESS) == 0)
+    free_trap_command (sig);
+  trap_list[sig] = value;
+
+  sigmodes[sig] |= SIG_TRAPPED;
+  if (value == (char *)IGNORE_SIG)
+    sigmodes[sig] |= SIG_IGNORED;
+  else
+    sigmodes[sig] &= ~SIG_IGNORED;
+  if (sigmodes[sig] & SIG_INPROGRESS)
+    sigmodes[sig] |= SIG_CHANGED;
+}
+
+void
+get_original_signal (sig)
+     int sig;
+{
+  /* If we aren't sure the of the original value, then get it. */
+  if (sig > 0 && sig < NSIG && original_signals[sig] == (SigHandler *)IMPOSSIBLE_TRAP_HANDLER)
+    GETORIGSIG (sig);
+}
+
+void
+get_all_original_signals ()
+{
+  register int i;
+
+  for (i = 1; i < NSIG; i++)
+    GET_ORIGINAL_SIGNAL (i);
+}
+
+void
+set_original_signal (sig, handler)
+     int sig;
+     SigHandler *handler;
+{
+  if (sig > 0 && sig < NSIG && original_signals[sig] == (SigHandler *)IMPOSSIBLE_TRAP_HANDLER)
+    SETORIGSIG (sig, handler);
+}
+
+/* Restore the default action for SIG; i.e., the action the shell
+   would have taken before you used the trap command.  This is called
+   from trap_builtin (), which takes care to restore the handlers for
+   the signals the shell treats specially. */
+void
+restore_default_signal (sig)
+     int sig;
+{
+  if (SPECIAL_TRAP (sig))
+    {
+      if ((sig != DEBUG_TRAP && sig != ERROR_TRAP && sig != RETURN_TRAP) ||
+	  (sigmodes[sig] & SIG_INPROGRESS) == 0)
+	free_trap_command (sig);
+      trap_list[sig] = (char *)NULL;
+      sigmodes[sig] &= ~SIG_TRAPPED;
+      if (sigmodes[sig] & SIG_INPROGRESS)
+	sigmodes[sig] |= SIG_CHANGED;
+      return;
+    }
+
+  GET_ORIGINAL_SIGNAL (sig);
+
+  /* A signal ignored on entry to the shell cannot be trapped or reset, but
+     no error is reported when attempting to do so.  Thanks Posix.2. */
+  if (sigmodes[sig] & SIG_HARD_IGNORE)
+    return;
+
+  /* If we aren't trapping this signal, don't bother doing anything else. */
+  /* We special-case SIGCHLD and IMPOSSIBLE_TRAP_HANDLER (see above) as a
+     sentinel to determine whether or not disposition is reset to the default
+     while the trap handler is executing. */
+  if (((sigmodes[sig] & SIG_TRAPPED) == 0) &&
+      (sig != SIGCHLD || (sigmodes[sig] & SIG_INPROGRESS) == 0 || trap_list[sig] != (char *)IMPOSSIBLE_TRAP_HANDLER))
+    return;
+
+  /* Only change the signal handler for SIG if it allows it. */
+  if ((sigmodes[sig] & SIG_NO_TRAP) == 0)
+    set_signal_handler (sig, original_signals[sig]);
+
+  /* Change the trap command in either case. */
+  change_signal (sig, (char *)DEFAULT_SIG);
+
+  /* Mark the signal as no longer trapped. */
+  sigmodes[sig] &= ~SIG_TRAPPED;
+}
+
+/* Make this signal be ignored. */
+void
+ignore_signal (sig)
+     int sig;
+{
+  if (SPECIAL_TRAP (sig) && ((sigmodes[sig] & SIG_IGNORED) == 0))
+    {
+      change_signal (sig, (char *)IGNORE_SIG);
+      return;
+    }
+
+  GET_ORIGINAL_SIGNAL (sig);
+
+  /* A signal ignored on entry to the shell cannot be trapped or reset.
+     No error is reported when the user attempts to do so. */
+  if (sigmodes[sig] & SIG_HARD_IGNORE)
+    return;
+
+  /* If already trapped and ignored, no change necessary. */
+  if (sigmodes[sig] & SIG_IGNORED)
+    return;
+
+  /* Only change the signal handler for SIG if it allows it. */
+  if ((sigmodes[sig] & SIG_NO_TRAP) == 0)
+    set_signal_handler (sig, SIG_IGN);
+
+  /* Change the trap command in either case. */
+  change_signal (sig, (char *)IGNORE_SIG);
+}
+
+/* Handle the calling of "trap 0".  The only sticky situation is when
+   the command to be executed includes an "exit".  This is why we have
+   to provide our own place for top_level to jump to. */
+int
+run_exit_trap ()
+{
+  char *trap_command;
+  int code, function_code, retval;
+#if defined (ARRAY_VARS)
+  ARRAY *ps;
+#endif
+
+  trap_saved_exit_value = last_command_exit_value;
+#if defined (ARRAY_VARS)
+  ps = save_pipestatus_array ();
+#endif
+  function_code = 0;
+
+  /* Run the trap only if signal 0 is trapped and not ignored, and we are not
+     currently running in the trap handler (call to exit in the list of
+     commands given to trap 0). */
+  if ((sigmodes[EXIT_TRAP] & SIG_TRAPPED) &&
+      (sigmodes[EXIT_TRAP] & (SIG_IGNORED|SIG_INPROGRESS)) == 0)
+    {
+      trap_command = savestring (trap_list[EXIT_TRAP]);
+      sigmodes[EXIT_TRAP] &= ~SIG_TRAPPED;
+      sigmodes[EXIT_TRAP] |= SIG_INPROGRESS;
+
+      retval = trap_saved_exit_value;
+      running_trap = 1;
+
+      code = setjmp_nosigs (top_level);
+
+      /* If we're in a function, make sure return longjmps come here, too. */
+      if (return_catch_flag)
+	function_code = setjmp_nosigs (return_catch);
+
+      if (code == 0 && function_code == 0)
+	{
+	  reset_parser ();
+	  parse_and_execute (trap_command, "exit trap", SEVAL_NONINT|SEVAL_NOHIST|SEVAL_RESETLINE);
+	}
+      else if (code == ERREXIT)
+	retval = last_command_exit_value;
+      else if (code == EXITPROG)
+	retval = last_command_exit_value;
+      else if (function_code != 0)
+        retval = return_catch_value;
+      else
+	retval = trap_saved_exit_value;
+
+      running_trap = 0;
+#if defined (ARRAY_VARS)
+      array_dispose (ps);
+#endif
+
+      return retval;
+    }
+
+#if defined (ARRAY_VARS)
+  restore_pipestatus_array (ps);
+#endif
+  return (trap_saved_exit_value);
+}
+
+void
+run_trap_cleanup (sig)
+     int sig;
+{
+  /* XXX - should we clean up trap_list[sig] == IMPOSSIBLE_TRAP_HANDLER? */
+  sigmodes[sig] &= ~(SIG_INPROGRESS|SIG_CHANGED);
+}
+
+#define RECURSIVE_SIG(s) (SPECIAL_TRAP(s) == 0)
+
+/* Run a trap command for SIG.  SIG is one of the signals the shell treats
+   specially.  Returns the exit status of the executed trap command list. */
+static int
+_run_trap_internal (sig, tag)
+     int sig;
+     char *tag;
+{
+  char *trap_command, *old_trap;
+  int trap_exit_value;
+  volatile int save_return_catch_flag, function_code;
+  int old_modes, old_running, old_int;
+  int flags;
+  procenv_t save_return_catch;
+  WORD_LIST *save_subst_varlist;
+  HASH_TABLE *save_tempenv;
+  sh_parser_state_t pstate;
+#if defined (ARRAY_VARS)
+  ARRAY *ps;
+#endif
+
+  old_modes = old_running = -1;
+
+  trap_exit_value = function_code = 0;
+  trap_saved_exit_value = last_command_exit_value;
+  /* Run the trap only if SIG is trapped and not ignored, and we are not
+     currently executing in the trap handler. */
+  if ((sigmodes[sig] & SIG_TRAPPED) && ((sigmodes[sig] & SIG_IGNORED) == 0) &&
+      (trap_list[sig] != (char *)IMPOSSIBLE_TRAP_HANDLER) &&
+#if 1
+      /* Uncomment this to allow some special signals to recursively execute
+	 trap handlers. */
+      (RECURSIVE_SIG (sig) || (sigmodes[sig] & SIG_INPROGRESS) == 0))
+#else
+      ((sigmodes[sig] & SIG_INPROGRESS) == 0))
+#endif
+    {
+      old_trap = trap_list[sig];
+      old_modes = sigmodes[sig];
+      old_running = running_trap;
+
+      sigmodes[sig] |= SIG_INPROGRESS;
+      sigmodes[sig] &= ~SIG_CHANGED;		/* just to be sure */
+      trap_command =  savestring (old_trap);
+
+      running_trap = sig + 1;
+
+      old_int = interrupt_state;	/* temporarily suppress pending interrupts */
+      CLRINTERRUPT;
+
+#if defined (ARRAY_VARS)
+      ps = save_pipestatus_array ();
+#endif
+
+      save_parser_state (&pstate);
+      save_subst_varlist = subst_assign_varlist;
+      subst_assign_varlist = 0;
+      save_tempenv = temporary_env;
+      temporary_env = 0;	/* traps should not run with temporary env */
+
+#if defined (JOB_CONTROL)
+      if (sig != DEBUG_TRAP)	/* run_debug_trap does this */
+	save_pipeline (1);	/* XXX only provides one save level */
+#endif
+
+      /* If we're in a function, make sure return longjmps come here, too. */
+      save_return_catch_flag = return_catch_flag;
+      if (return_catch_flag)
+	{
+	  COPY_PROCENV (return_catch, save_return_catch);
+	  function_code = setjmp_nosigs (return_catch);
+	}
+
+      flags = SEVAL_NONINT|SEVAL_NOHIST;
+      if (sig != DEBUG_TRAP && sig != RETURN_TRAP && sig != ERROR_TRAP)
+	flags |= SEVAL_RESETLINE;
+      evalnest++;
+      if (function_code == 0)
+        {
+	  parse_and_execute (trap_command, tag, flags);
+	  trap_exit_value = last_command_exit_value;
+        }
+      else
+        trap_exit_value = return_catch_value;
+      evalnest--;
+
+#if defined (JOB_CONTROL)
+      if (sig != DEBUG_TRAP)	/* run_debug_trap does this */
+	restore_pipeline (1);
+#endif
+
+      subst_assign_varlist = save_subst_varlist;
+      restore_parser_state (&pstate);
+
+#if defined (ARRAY_VARS)
+      restore_pipestatus_array (ps);
+#endif
+
+      temporary_env = save_tempenv;
+
+      if ((old_modes & SIG_INPROGRESS) == 0)
+	sigmodes[sig] &= ~SIG_INPROGRESS;
+
+      running_trap = old_running;
+      interrupt_state = old_int;
+
+      if (sigmodes[sig] & SIG_CHANGED)
+	{
+#if 0
+	  /* Special traps like EXIT, DEBUG, RETURN are handled explicitly in
+	     the places where they can be changed using unwind-protects.  For
+	     example, look at execute_cmd.c:execute_function(). */
+	  if (SPECIAL_TRAP (sig) == 0)
+#endif
+	    free (old_trap);
+	  sigmodes[sig] &= ~SIG_CHANGED;
+
+	  CHECK_TERMSIG;	/* some pathological conditions lead here */
+	}
+
+      if (save_return_catch_flag)
+	{
+	  return_catch_flag = save_return_catch_flag;
+	  return_catch_value = trap_exit_value;
+	  COPY_PROCENV (save_return_catch, return_catch);
+	  if (function_code)
+	    {
+#if 0
+	      from_return_trap = sig == RETURN_TRAP;
+#endif
+	      sh_longjmp (return_catch, 1);
+	    }
+	}
+    }
+
+  return trap_exit_value;
+}
+
+int
+run_debug_trap ()
+{
+  int trap_exit_value, old_verbose;
+  pid_t save_pgrp;
+#if defined (PGRP_PIPE)
+  int save_pipe[2];
+#endif
+
+  /* XXX - question:  should the DEBUG trap inherit the RETURN trap? */
+  trap_exit_value = 0;
+  if ((sigmodes[DEBUG_TRAP] & SIG_TRAPPED) && ((sigmodes[DEBUG_TRAP] & SIG_IGNORED) == 0) && ((sigmodes[DEBUG_TRAP] & SIG_INPROGRESS) == 0))
+    {
+#if defined (JOB_CONTROL)
+      save_pgrp = pipeline_pgrp;
+      pipeline_pgrp = 0;
+      save_pipeline (1);
+#  if defined (PGRP_PIPE)
+      save_pgrp_pipe (save_pipe, 1);
+#  endif
+      stop_making_children ();
+#endif
+
+      old_verbose = echo_input_at_read;
+      echo_input_at_read = suppress_debug_trap_verbose ? 0 : echo_input_at_read;
+
+      trap_exit_value = _run_trap_internal (DEBUG_TRAP, "debug trap");
+
+      echo_input_at_read = old_verbose;
+
+#if defined (JOB_CONTROL)
+      pipeline_pgrp = save_pgrp;
+      restore_pipeline (1);
+#  if defined (PGRP_PIPE)
+      close_pgrp_pipe ();
+      restore_pgrp_pipe (save_pipe);
+#  endif
+      if (pipeline_pgrp > 0 && ((subshell_environment & (SUBSHELL_ASYNC|SUBSHELL_PIPE)) == 0))
+	give_terminal_to (pipeline_pgrp, 1);
+
+      notify_and_cleanup ();
+#endif
+      
+#if defined (DEBUGGER)
+      /* If we're in the debugger and the DEBUG trap returns 2 while we're in
+	 a function or sourced script, we force a `return'. */
+      if (debugging_mode && trap_exit_value == 2 && return_catch_flag)
+	{
+	  return_catch_value = trap_exit_value;
+	  sh_longjmp (return_catch, 1);
+	}
+#endif
+    }
+  return trap_exit_value;
+}
+
+void
+run_error_trap ()
+{
+  if ((sigmodes[ERROR_TRAP] & SIG_TRAPPED) && ((sigmodes[ERROR_TRAP] & SIG_IGNORED) == 0) && (sigmodes[ERROR_TRAP] & SIG_INPROGRESS) == 0)
+    _run_trap_internal (ERROR_TRAP, "error trap");
+}
+
+void
+run_return_trap ()
+{
+  int old_exit_value;
+
+#if 0
+  if ((sigmodes[DEBUG_TRAP] & SIG_TRAPPED) && (sigmodes[DEBUG_TRAP] & SIG_INPROGRESS))
+    return;
+#endif
+
+  if ((sigmodes[RETURN_TRAP] & SIG_TRAPPED) && ((sigmodes[RETURN_TRAP] & SIG_IGNORED) == 0) && (sigmodes[RETURN_TRAP] & SIG_INPROGRESS) == 0)
+    {
+      old_exit_value = last_command_exit_value;
+      _run_trap_internal (RETURN_TRAP, "return trap");
+      last_command_exit_value = old_exit_value;
+    }
+}
+
+/* Run a trap set on SIGINT.  This is called from throw_to_top_level (), and
+   declared here to localize the trap functions. */
+void
+run_interrupt_trap (will_throw)
+     int will_throw;	/* from throw_to_top_level? */
+{
+  if (will_throw && running_trap > 0)
+    run_trap_cleanup (running_trap - 1);
+  pending_traps[SIGINT] = 0;	/* run_pending_traps does this */
+  catch_flag = 0;
+  _run_trap_internal (SIGINT, "interrupt trap");
+}
+
+/* Free all the allocated strings in the list of traps and reset the trap
+   values to the default.  Intended to be called from subshells that want
+   to complete work done by reset_signal_handlers upon execution of a
+   subsequent `trap' command that changes a signal's disposition.  We need
+   to make sure that we duplicate the behavior of
+   reset_or_restore_signal_handlers and not change the disposition of signals
+   that are set to be ignored. */
+void
+free_trap_strings ()
+{
+  register int i;
+
+  for (i = 0; i < NSIG; i++)
+    {
+      if (trap_list[i] != (char *)IGNORE_SIG)
+	free_trap_string (i);
+    }
+  for (i = NSIG; i < BASH_NSIG; i++)
+    {
+      /* Don't free the trap string if the subshell inherited the trap */
+      if ((sigmodes[i] & SIG_TRAPPED) == 0)
+	{
+	  free_trap_string (i);
+	  trap_list[i] = (char *)NULL;
+	}
+    }
+}
+
+/* Free a trap command string associated with SIG without changing signal
+   disposition.  Intended to be called from free_trap_strings()  */
+static void
+free_trap_string (sig)
+     int sig;
+{
+  change_signal (sig, (char *)DEFAULT_SIG);
+  sigmodes[sig] &= ~SIG_TRAPPED;		/* XXX - SIG_INPROGRESS? */
+}
+
+/* Reset the handler for SIG to the original value but leave the trap string
+   in place. */
+static void
+reset_signal (sig)
+     int sig;
+{
+  set_signal_handler (sig, original_signals[sig]);
+  sigmodes[sig] &= ~SIG_TRAPPED;		/* XXX - SIG_INPROGRESS? */
+}
+
+/* Set the handler signal SIG to the original and free any trap
+   command associated with it. */
+static void
+restore_signal (sig)
+     int sig;
+{
+  set_signal_handler (sig, original_signals[sig]);
+  change_signal (sig, (char *)DEFAULT_SIG);
+  sigmodes[sig] &= ~SIG_TRAPPED;
+}
+
+static void
+reset_or_restore_signal_handlers (reset)
+     sh_resetsig_func_t *reset;
+{
+  register int i;
+
+  /* Take care of the exit trap first */
+  if (sigmodes[EXIT_TRAP] & SIG_TRAPPED)
+    {
+      sigmodes[EXIT_TRAP] &= ~SIG_TRAPPED;	/* XXX - SIG_INPROGRESS? */
+      if (reset != reset_signal)
+	{
+	  free_trap_command (EXIT_TRAP);
+	  trap_list[EXIT_TRAP] = (char *)NULL;
+	}
+    }
+
+  for (i = 1; i < NSIG; i++)
+    {
+      if (sigmodes[i] & SIG_TRAPPED)
+	{
+	  if (trap_list[i] == (char *)IGNORE_SIG)
+	    set_signal_handler (i, SIG_IGN);
+	  else
+	    (*reset) (i);
+	}
+      else if (sigmodes[i] & SIG_SPECIAL)
+	(*reset) (i);
+      pending_traps[i] = 0;	/* XXX */
+    }
+
+  /* Command substitution and other child processes don't inherit the
+     debug, error, or return traps.  If we're in the debugger, and the
+     `functrace' or `errtrace' options have been set, then let command
+     substitutions inherit them.  Let command substitution inherit the
+     RETURN trap if we're in the debugger and tracing functions. */
+  if (function_trace_mode == 0)
+    {
+      sigmodes[DEBUG_TRAP] &= ~SIG_TRAPPED;
+      sigmodes[RETURN_TRAP] &= ~SIG_TRAPPED;
+    }
+  if (error_trace_mode == 0)
+    sigmodes[ERROR_TRAP] &= ~SIG_TRAPPED;
+}
+
+/* Reset trapped signals to their original values, but don't free the
+   trap strings.  Called by the command substitution code and other places
+   that create a "subshell environment". */
+void
+reset_signal_handlers ()
+{
+  reset_or_restore_signal_handlers (reset_signal);
+}
+
+/* Reset all trapped signals to their original values.  Signals set to be
+   ignored with trap '' SIGNAL should be ignored, so we make sure that they
+   are.  Called by child processes after they are forked. */
+void
+restore_original_signals ()
+{
+  reset_or_restore_signal_handlers (restore_signal);
+}
+
+/* If a trap handler exists for signal SIG, then call it; otherwise just
+   return failure.  Returns 1 if it called the trap handler. */
+int
+maybe_call_trap_handler (sig)
+     int sig;
+{
+  /* Call the trap handler for SIG if the signal is trapped and not ignored. */
+  if ((sigmodes[sig] & SIG_TRAPPED) && ((sigmodes[sig] & SIG_IGNORED) == 0))
+    {
+      switch (sig)
+	{
+	case SIGINT:
+	  run_interrupt_trap (0);
+	  break;
+	case EXIT_TRAP:
+	  run_exit_trap ();
+	  break;
+	case DEBUG_TRAP:
+	  run_debug_trap ();
+	  break;
+	case ERROR_TRAP:
+	  run_error_trap ();
+	  break;
+	default:
+	  trap_handler (sig);
+	  break;
+	}
+      return (1);
+    }
+  else
+    return (0);
+}
+
+int
+signal_is_trapped (sig)
+     int sig;
+{
+  return (sigmodes[sig] & SIG_TRAPPED);
+}
+
+int
+signal_is_pending (sig)
+     int sig;
+{
+  return (pending_traps[sig]);
+}
+
+int
+signal_is_special (sig)
+     int sig;
+{
+  return (sigmodes[sig] & SIG_SPECIAL);
+}
+
+int
+signal_is_ignored (sig)
+     int sig;
+{
+  return (sigmodes[sig] & SIG_IGNORED);
+}
+
+int
+signal_is_hard_ignored (sig)
+     int sig;
+{
+  return (sigmodes[sig] & SIG_HARD_IGNORE);
+}
+
+void
+set_signal_hard_ignored (sig)
+     int sig;
+{
+  sigmodes[sig] |= SIG_HARD_IGNORE;
+  original_signals[sig] = SIG_IGN;
+}
+
+void
+set_signal_ignored (sig)
+     int sig;
+{
+  original_signals[sig] = SIG_IGN;
+}
+
+int
+signal_in_progress (sig)
+     int sig;
+{
+  return (sigmodes[sig] & SIG_INPROGRESS);
+}
+
+#if 0 /* TAG: bash-5.2 */
+int
+block_trapped_signals (maskp, omaskp)
+     sigset_t *maskp;
+     sigset_t *omaskp;
+{
+  int i;
+
+  sigemptyset (maskp);
+  for (i = 1; i < NSIG; i++)
+    if (sigmodes[i] & SIG_TRAPPED)
+      sigaddset (maskp, i);
+  return (sigprocmask (SIG_BLOCK, maskp, omaskp));
+}
+
+int
+unblock_trapped_signals (maskp)
+     sigset_t *maskp;
+{
+  return (sigprocmask (SIG_SETMASK, maskp, 0));
+}
+#endif
diff --git a/trap.h b/trap.h
new file mode 100644
index 0000000..ef64a68
--- /dev/null
+++ b/trap.h
@@ -0,0 +1,128 @@
+/* trap.h -- data structures used in the trap mechanism. */
+
+/* Copyright (C) 1993-2013 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_TRAP_H_)
+#define _TRAP_H_
+
+#include "stdc.h"
+
+#if !defined (SIG_DFL)
+#include "bashtypes.h"
+#include <signal.h>
+#endif /* SIG_DFL */
+
+#if !defined (NSIG)
+#define NSIG 64
+#endif /* !NSIG */
+
+#define NO_SIG -1
+#define DEFAULT_SIG	SIG_DFL
+#define IGNORE_SIG	SIG_IGN
+
+/* Special shell trap names. */
+#define DEBUG_TRAP	NSIG
+#define ERROR_TRAP	NSIG+1
+#define RETURN_TRAP	NSIG+2
+#define EXIT_TRAP 	0
+
+/* system signals plus special bash traps */
+#define BASH_NSIG	NSIG+3
+
+/* Flags values for decode_signal() */
+#define DSIG_SIGPREFIX	0x01		/* don't allow `SIG' PREFIX */
+#define DSIG_NOCASE	0x02		/* case-insensitive comparison */
+
+/* A value which can never be the target of a trap handler. */
+#define IMPOSSIBLE_TRAP_HANDLER (SigHandler *)initialize_traps
+
+#define signal_object_p(x,f) (decode_signal (x,f) != NO_SIG)
+
+#define TRAP_STRING(s) \
+  (signal_is_trapped (s) && signal_is_ignored (s) == 0) ? trap_list[s] \
+							: (char *)NULL
+
+extern char *trap_list[];
+
+extern int trapped_signal_received;
+extern int wait_signal_received;
+extern int running_trap;
+extern int trap_saved_exit_value;
+extern int suppress_debug_trap_verbose;
+
+/* Externally-visible functions declared in trap.c. */
+extern void initialize_traps PARAMS((void));
+
+extern void run_pending_traps PARAMS((void));
+
+extern void queue_sigchld_trap PARAMS((int));
+extern void maybe_set_sigchld_trap PARAMS((char *));
+extern void set_impossible_sigchld_trap PARAMS((void));
+extern void set_sigchld_trap PARAMS((char *));
+
+extern void set_debug_trap PARAMS((char *));
+extern void set_error_trap PARAMS((char *));
+extern void set_return_trap PARAMS((char *));
+
+extern void maybe_set_debug_trap PARAMS((char *));
+extern void maybe_set_error_trap PARAMS((char *));
+extern void maybe_set_return_trap PARAMS((char *));
+
+extern void set_sigint_trap PARAMS((char *));
+extern void set_signal PARAMS((int, char *));
+
+extern void restore_default_signal PARAMS((int));
+extern void ignore_signal PARAMS((int));
+extern int run_exit_trap PARAMS((void));
+extern void run_trap_cleanup PARAMS((int));
+extern int run_debug_trap PARAMS((void));
+extern void run_error_trap PARAMS((void));
+extern void run_return_trap PARAMS((void));
+
+extern void free_trap_strings PARAMS((void));
+extern void reset_signal_handlers PARAMS((void));
+extern void restore_original_signals PARAMS((void));
+
+extern void get_original_signal PARAMS((int));
+extern void get_all_original_signals PARAMS((void));
+
+extern char *signal_name PARAMS((int));
+
+extern int decode_signal PARAMS((char *, int));
+extern void run_interrupt_trap PARAMS((int));
+extern int maybe_call_trap_handler PARAMS((int));
+extern int signal_is_special PARAMS((int));
+extern int signal_is_trapped PARAMS((int));
+extern int signal_is_pending PARAMS((int));
+extern int signal_is_ignored PARAMS((int));
+extern int signal_is_hard_ignored PARAMS((int));
+extern void set_signal_hard_ignored PARAMS((int));
+extern void set_signal_ignored PARAMS((int));
+extern int signal_in_progress PARAMS((int));
+
+extern void set_trap_state PARAMS((int));
+
+extern int next_pending_trap PARAMS((int));
+extern int first_pending_trap PARAMS((void));
+extern void clear_pending_traps PARAMS((void));
+extern int any_signals_trapped PARAMS((void));
+extern void check_signals PARAMS((void));
+extern void check_signals_and_traps PARAMS((void));
+
+#endif /* _TRAP_H_ */
diff --git a/unwind_prot.c b/unwind_prot.c
new file mode 100644
index 0000000..5703777
--- /dev/null
+++ b/unwind_prot.c
@@ -0,0 +1,382 @@
+/* unwind_prot.c - a simple unwind-protect system for internal variables */
+
+/* I can't stand it anymore!  Please can't we just write the
+   whole Unix system in lisp or something? */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* **************************************************************** */
+/*								    */
+/*		      Unwind Protection Scheme for Bash		    */
+/*								    */
+/* **************************************************************** */
+#include "config.h"
+
+#include "bashtypes.h"
+#include "bashansi.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#if STDC_HEADERS
+#  include <stddef.h>
+#endif
+
+#ifndef offsetof
+#  define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
+#endif
+
+#include "command.h"
+#include "general.h"
+#include "unwind_prot.h"
+#include "sig.h"
+#include "quit.h"
+#include "error.h"	/* for internal_warning */
+#include "ocache.h"
+
+/* Structure describing a saved variable and the value to restore it to.  */
+typedef struct {
+  char *variable;
+  int size;
+  char desired_setting[1]; /* actual size is `size' */
+} SAVED_VAR;
+
+/* If HEAD.CLEANUP is null, then ARG.V contains a tag to throw back to.
+   If HEAD.CLEANUP is restore_variable, then SV.V contains the saved
+   variable.  Otherwise, call HEAD.CLEANUP (ARG.V) to clean up.  */
+typedef union uwp {
+  struct uwp_head {
+    union uwp *next;
+    Function *cleanup;
+  } head;
+  struct {
+    struct uwp_head uwp_head;
+    char *v;
+  } arg;
+  struct {
+    struct uwp_head uwp_head;
+    SAVED_VAR v;
+  } sv;
+} UNWIND_ELT;
+
+static void without_interrupts PARAMS((VFunction *, char *, char *));
+static void unwind_frame_discard_internal PARAMS((char *, char *));
+static void unwind_frame_run_internal PARAMS((char *, char *));
+static void add_unwind_protect_internal PARAMS((Function *, char *));
+static void remove_unwind_protect_internal PARAMS((char *, char *));
+static void run_unwind_protects_internal PARAMS((char *, char *));
+static void clear_unwind_protects_internal PARAMS((char *, char *));
+static inline void restore_variable PARAMS((SAVED_VAR *));
+static void unwind_protect_mem_internal PARAMS((char *, char *));
+
+static UNWIND_ELT *unwind_protect_list = (UNWIND_ELT *)NULL;
+
+/* Allocating from a cache of unwind-protect elements */
+#define UWCACHESIZE	128
+
+sh_obj_cache_t uwcache = {0, 0, 0};
+
+#if 0
+#define uwpalloc(elt)	(elt) = (UNWIND_ELT *)xmalloc (sizeof (UNWIND_ELT))
+#define uwpfree(elt)	free(elt)
+#else
+#define uwpalloc(elt)	ocache_alloc (uwcache, UNWIND_ELT, elt)
+#define uwpfree(elt)	ocache_free (uwcache, UNWIND_ELT, elt)
+#endif
+
+void
+uwp_init ()
+{
+  ocache_create (uwcache, UNWIND_ELT, UWCACHESIZE);
+}
+
+/* Run a function without interrupts.  This relies on the fact that the
+   FUNCTION cannot call QUIT (). */
+static void
+without_interrupts (function, arg1, arg2)
+     VFunction *function;
+     char *arg1, *arg2;
+{
+  (*function)(arg1, arg2);
+}
+
+/* Start the beginning of a region. */
+void
+begin_unwind_frame (tag)
+     char *tag;
+{
+  add_unwind_protect ((Function *)NULL, tag);
+}
+
+/* Discard the unwind protects back to TAG. */
+void
+discard_unwind_frame (tag)
+     char *tag;
+{
+  if (unwind_protect_list)
+    without_interrupts (unwind_frame_discard_internal, tag, (char *)NULL);
+}
+
+/* Run the unwind protects back to TAG. */
+void
+run_unwind_frame (tag)
+     char *tag;
+{
+  if (unwind_protect_list)
+    without_interrupts (unwind_frame_run_internal, tag, (char *)NULL);
+}
+
+/* Add the function CLEANUP with ARG to the list of unwindable things. */
+void
+add_unwind_protect (cleanup, arg)
+     Function *cleanup;
+     char *arg;
+{
+  without_interrupts (add_unwind_protect_internal, (char *)cleanup, arg);
+}
+
+/* Remove the top unwind protect from the list. */
+void
+remove_unwind_protect ()
+{
+  if (unwind_protect_list)
+    without_interrupts
+      (remove_unwind_protect_internal, (char *)NULL, (char *)NULL);
+}
+
+/* Run the list of cleanup functions in unwind_protect_list. */
+void
+run_unwind_protects ()
+{
+  if (unwind_protect_list)
+    without_interrupts
+      (run_unwind_protects_internal, (char *)NULL, (char *)NULL);
+}
+
+/* Erase the unwind-protect list.  If flags is 1, free the elements. */
+void
+clear_unwind_protect_list (flags)
+     int flags;
+{
+  char *flag;
+
+  if (unwind_protect_list)
+    {
+      flag = flags ? "" : (char *)NULL;
+      without_interrupts
+        (clear_unwind_protects_internal, flag, (char *)NULL);
+    }
+}
+
+int
+have_unwind_protects ()
+{
+  return (unwind_protect_list != 0);
+}
+
+int
+unwind_protect_tag_on_stack (tag)
+     const char *tag;
+{
+  UNWIND_ELT *elt;
+
+  elt = unwind_protect_list;
+  while (elt)
+    {
+      if (elt->head.cleanup == 0 && STREQ (elt->arg.v, tag))
+	return 1;
+      elt = elt->head.next;
+    }
+  return 0;
+}
+
+/* **************************************************************** */
+/*								    */
+/*			The Actual Functions		 	    */
+/*								    */
+/* **************************************************************** */
+
+static void
+add_unwind_protect_internal (cleanup, arg)
+     Function *cleanup;
+     char *arg;
+{
+  UNWIND_ELT *elt;
+
+  uwpalloc (elt);
+  elt->head.next = unwind_protect_list;
+  elt->head.cleanup = cleanup;
+  elt->arg.v = arg;
+  unwind_protect_list = elt;
+}
+
+static void
+remove_unwind_protect_internal (ignore1, ignore2)
+     char *ignore1, *ignore2;
+{
+  UNWIND_ELT *elt;
+
+  elt = unwind_protect_list;
+  if (elt)
+    {
+      unwind_protect_list = unwind_protect_list->head.next;
+      uwpfree (elt);
+    }
+}
+
+static void
+run_unwind_protects_internal (ignore1, ignore2)
+     char *ignore1, *ignore2;
+{
+  unwind_frame_run_internal ((char *) NULL, (char *) NULL);
+}
+
+static void
+clear_unwind_protects_internal (flag, ignore)
+     char *flag, *ignore;
+{
+  if (flag)
+    {
+      while (unwind_protect_list)
+	remove_unwind_protect_internal ((char *)NULL, (char *)NULL);
+    }
+  unwind_protect_list = (UNWIND_ELT *)NULL;
+}
+
+static void
+unwind_frame_discard_internal (tag, ignore)
+     char *tag, *ignore;
+{
+  UNWIND_ELT *elt;
+  int found;
+
+  found = 0;
+  while (elt = unwind_protect_list)
+    {
+      unwind_protect_list = unwind_protect_list->head.next;
+      if (elt->head.cleanup == 0 && (STREQ (elt->arg.v, tag)))
+	{
+	  uwpfree (elt);
+	  found = 1;
+	  break;
+	}
+      else
+	uwpfree (elt);
+    }
+
+  if (found == 0)
+    internal_warning ("unwind_frame_discard: %s: frame not found", tag);
+}
+
+/* Restore the value of a variable, based on the contents of SV.
+   sv->desired_setting is a block of memory SIZE bytes long holding the
+   value itself.  This block of memory is copied back into the variable. */
+static inline void
+restore_variable (sv)
+     SAVED_VAR *sv;
+{
+  FASTCOPY (sv->desired_setting, sv->variable, sv->size);
+}
+
+static void
+unwind_frame_run_internal (tag, ignore)
+     char *tag, *ignore;
+{
+  UNWIND_ELT *elt;
+  int found;
+
+  found = 0;
+  while (elt = unwind_protect_list)
+    {
+      unwind_protect_list = elt->head.next;
+
+      /* If tag, then compare. */
+      if (elt->head.cleanup == 0)
+	{
+	  if (tag && STREQ (elt->arg.v, tag))
+	    {
+	      uwpfree (elt);
+	      found = 1;
+	      break;
+	    }
+	}
+      else
+	{
+	  if (elt->head.cleanup == (Function *) restore_variable)
+	    restore_variable (&elt->sv.v);
+	  else
+	    (*(elt->head.cleanup)) (elt->arg.v);
+	}
+
+      uwpfree (elt);
+    }
+  if (tag && found == 0)
+    internal_warning ("unwind_frame_run: %s: frame not found", tag);
+}
+
+static void
+unwind_protect_mem_internal (var, psize)
+     char *var;
+     char *psize;
+{
+  int size, allocated;
+  UNWIND_ELT *elt;
+
+  size = *(int *) psize;
+  allocated = size + offsetof (UNWIND_ELT, sv.v.desired_setting[0]);
+  if (allocated < sizeof (UNWIND_ELT))
+    allocated = sizeof (UNWIND_ELT);
+  elt = (UNWIND_ELT *)xmalloc (allocated);
+  elt->head.next = unwind_protect_list;
+  elt->head.cleanup = (Function *) restore_variable;
+  elt->sv.v.variable = var;
+  elt->sv.v.size = size;
+  FASTCOPY (var, elt->sv.v.desired_setting, size);
+  unwind_protect_list = elt;
+}
+
+/* Save the value of a variable so it will be restored when unwind-protects
+   are run.  VAR is a pointer to the variable.  SIZE is the size in
+   bytes of VAR.  */
+void
+unwind_protect_mem (var, size)
+     char *var;
+     int size;
+{
+  without_interrupts (unwind_protect_mem_internal, var, (char *) &size);
+}
+
+#if defined (DEBUG)
+#include <stdio.h>
+
+void
+print_unwind_protect_tags ()
+{
+  UNWIND_ELT *elt;
+
+  elt = unwind_protect_list;
+  while (elt)
+    {
+      if (elt->head.cleanup == 0)
+        fprintf(stderr, "tag: %s\n", elt->arg.v);
+      elt = elt->head.next;
+    }
+}
+#endif
diff --git a/unwind_prot.h b/unwind_prot.h
new file mode 100644
index 0000000..97b3af9
--- /dev/null
+++ b/unwind_prot.h
@@ -0,0 +1,52 @@
+/* unwind_prot.h - Macros and functions for hacking unwind protection. */
+
+/* Copyright (C) 1993-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_UNWIND_PROT_H)
+#define _UNWIND_PROT_H
+
+extern void uwp_init PARAMS((void));
+
+/* Run a function without interrupts. */
+extern void begin_unwind_frame PARAMS((char *));
+extern void discard_unwind_frame PARAMS((char *));
+extern void run_unwind_frame PARAMS((char *));
+extern void add_unwind_protect (); /* Not portable to arbitrary C99 hosts.  */
+extern void remove_unwind_protect PARAMS((void));
+extern void run_unwind_protects PARAMS((void));
+extern void clear_unwind_protect_list PARAMS((int));
+extern int have_unwind_protects PARAMS((void));
+extern int unwind_protect_tag_on_stack PARAMS((const char *));
+extern void uwp_init PARAMS((void));
+
+/* Define for people who like their code to look a certain way. */
+#define end_unwind_frame()
+
+/* How to protect a variable.  */
+#define unwind_protect_var(X) unwind_protect_mem ((char *)&(X), sizeof (X))
+extern void unwind_protect_mem PARAMS((char *, int));
+
+/* Backwards compatibility */
+#define unwind_protect_int	unwind_protect_var
+#define unwind_protect_short	unwind_protect_var
+#define unwind_protect_string	unwind_protect_var
+#define unwind_protect_pointer	unwind_protect_var
+#define unwind_protect_jmp_buf	unwind_protect_var
+
+#endif /* _UNWIND_PROT_H */
diff --git a/variables.c b/variables.c
new file mode 100644
index 0000000..73f157f
--- /dev/null
+++ b/variables.c
@@ -0,0 +1,6462 @@
+/* variables.c -- Functions for hacking shell variables. */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config.h"
+
+#include "bashtypes.h"
+#include "posixstat.h"
+#include "posixtime.h"
+
+#if defined (__QNX__)
+#  if defined (__QNXNTO__)
+#    include <sys/netmgr.h>
+#  else
+#    include <sys/vc.h>
+#  endif /* !__QNXNTO__ */
+#endif /* __QNX__ */
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#include <stdio.h>
+#include "chartypes.h"
+#if defined (HAVE_PWD_H)
+#  include <pwd.h>
+#endif
+#include "bashansi.h"
+#include "bashintl.h"
+#include "filecntl.h"
+
+#define NEED_XTRACE_SET_DECL
+
+#include "shell.h"
+#include "parser.h"
+#include "flags.h"
+#include "execute_cmd.h"
+#include "findcmd.h"
+#include "mailcheck.h"
+#include "input.h"
+#include "hashcmd.h"
+#include "pathexp.h"
+#include "alias.h"
+#include "jobs.h"
+
+#include "version.h"
+
+#include "builtins/getopt.h"
+#include "builtins/common.h"
+#include "builtins/builtext.h"
+
+#if defined (READLINE)
+#  include "bashline.h"
+#  include <readline/readline.h>
+#else
+#  include <tilde/tilde.h>
+#endif
+
+#if defined (HISTORY)
+#  include "bashhist.h"
+#  include <readline/history.h>
+#endif /* HISTORY */
+
+#if defined (PROGRAMMABLE_COMPLETION)
+#  include "pcomplete.h"
+#endif
+
+#define VARIABLES_HASH_BUCKETS	1024	/* must be power of two */
+#define FUNCTIONS_HASH_BUCKETS	512
+#define TEMPENV_HASH_BUCKETS	4	/* must be power of two */
+
+#define BASHFUNC_PREFIX		"BASH_FUNC_"
+#define BASHFUNC_PREFLEN	10	/* == strlen(BASHFUNC_PREFIX */
+#define BASHFUNC_SUFFIX		"%%"
+#define BASHFUNC_SUFFLEN	2	/* == strlen(BASHFUNC_SUFFIX) */
+
+/* flags for find_variable_internal */
+
+#define FV_FORCETEMPENV		0x01
+#define FV_SKIPINVISIBLE	0x02
+#define FV_NODYNAMIC		0x04
+
+extern char **environ;
+
+/* Variables used here and defined in other files. */
+extern time_t shell_start_time;
+extern struct timeval shellstart;
+
+/* The list of shell variables that the user has created at the global
+   scope, or that came from the environment. */
+VAR_CONTEXT *global_variables = (VAR_CONTEXT *)NULL;
+
+/* The current list of shell variables, including function scopes */
+VAR_CONTEXT *shell_variables = (VAR_CONTEXT *)NULL;
+
+/* The list of shell functions that the user has created, or that came from
+   the environment. */
+HASH_TABLE *shell_functions = (HASH_TABLE *)NULL;
+
+HASH_TABLE *invalid_env = (HASH_TABLE *)NULL;
+
+#if defined (DEBUGGER)
+/* The table of shell function definitions that the user defined or that
+   came from the environment. */
+HASH_TABLE *shell_function_defs = (HASH_TABLE *)NULL;
+#endif
+
+/* The current variable context.  This is really a count of how deep into
+   executing functions we are. */
+int variable_context = 0;
+
+/* If non-zero, local variables inherit values and attributes from a variable
+   with the same name at a previous scope. */
+int localvar_inherit = 0;
+
+/* If non-zero, calling `unset' on local variables in previous scopes marks
+   them as invisible so lookups find them unset. This is the same behavior
+   as local variables in the current local scope. */
+int localvar_unset = 0;
+
+/* The set of shell assignments which are made only in the environment
+   for a single command. */
+HASH_TABLE *temporary_env = (HASH_TABLE *)NULL;
+
+/* Set to non-zero if an assignment error occurs while putting variables
+   into the temporary environment. */
+int tempenv_assign_error;
+
+/* Some funky variables which are known about specially.  Here is where
+   "$*", "$1", and all the cruft is kept. */
+char *dollar_vars[10];
+WORD_LIST *rest_of_args = (WORD_LIST *)NULL;
+int posparam_count = 0;
+
+/* The value of $$. */
+pid_t dollar_dollar_pid;
+
+/* Non-zero means that we have to remake EXPORT_ENV. */
+int array_needs_making = 1;
+
+/* The number of times BASH has been executed.  This is set
+   by initialize_variables (). */
+int shell_level = 0;
+
+/* An array which is passed to commands as their environment.  It is
+   manufactured from the union of the initial environment and the
+   shell variables that are marked for export. */
+char **export_env = (char **)NULL;
+static int export_env_index;
+static int export_env_size;
+
+#if defined (READLINE)
+static int winsize_assignment;		/* currently assigning to LINES or COLUMNS */
+#endif
+
+SHELL_VAR nameref_invalid_value;
+static SHELL_VAR nameref_maxloop_value;
+
+static HASH_TABLE *last_table_searched;	/* hash_lookup sets this */
+static VAR_CONTEXT *last_context_searched;
+
+/* Some forward declarations. */
+static void create_variable_tables PARAMS((void));
+
+static void set_machine_vars PARAMS((void));
+static void set_home_var PARAMS((void));
+static void set_shell_var PARAMS((void));
+static char *get_bash_name PARAMS((void));
+static void initialize_shell_level PARAMS((void));
+static void uidset PARAMS((void));
+#if defined (ARRAY_VARS)
+static void make_vers_array PARAMS((void));
+#endif
+
+static SHELL_VAR *null_assign PARAMS((SHELL_VAR *, char *, arrayind_t, char *));
+#if defined (ARRAY_VARS)
+static SHELL_VAR *null_array_assign PARAMS((SHELL_VAR *, char *, arrayind_t, char *));
+#endif
+static SHELL_VAR *get_self PARAMS((SHELL_VAR *));
+
+#if defined (ARRAY_VARS)
+static SHELL_VAR *init_dynamic_array_var PARAMS((char *, sh_var_value_func_t *, sh_var_assign_func_t *, int));
+static SHELL_VAR *init_dynamic_assoc_var PARAMS((char *, sh_var_value_func_t *, sh_var_assign_func_t *, int));
+#endif
+
+static SHELL_VAR *assign_seconds PARAMS((SHELL_VAR *, char *, arrayind_t, char *));
+static SHELL_VAR *get_seconds PARAMS((SHELL_VAR *));
+static SHELL_VAR *init_seconds_var PARAMS((void));
+
+static SHELL_VAR *assign_random PARAMS((SHELL_VAR *, char *, arrayind_t, char *));
+static SHELL_VAR *get_random PARAMS((SHELL_VAR *));
+
+static SHELL_VAR *get_urandom PARAMS((SHELL_VAR *));
+
+static SHELL_VAR *assign_lineno PARAMS((SHELL_VAR *, char *, arrayind_t, char *));
+static SHELL_VAR *get_lineno PARAMS((SHELL_VAR *));
+
+static SHELL_VAR *assign_subshell PARAMS((SHELL_VAR *, char *, arrayind_t, char *));
+static SHELL_VAR *get_subshell PARAMS((SHELL_VAR *));
+
+static SHELL_VAR *get_epochseconds PARAMS((SHELL_VAR *));
+static SHELL_VAR *get_epochrealtime PARAMS((SHELL_VAR *));
+
+static SHELL_VAR *get_bashpid PARAMS((SHELL_VAR *));
+
+static SHELL_VAR *get_bash_argv0 PARAMS((SHELL_VAR *));
+static SHELL_VAR *assign_bash_argv0 PARAMS((SHELL_VAR *, char *, arrayind_t, char *));
+static void set_argv0 PARAMS((void));
+
+#if defined (HISTORY)
+static SHELL_VAR *get_histcmd PARAMS((SHELL_VAR *));
+#endif
+
+#if defined (READLINE)
+static SHELL_VAR *get_comp_wordbreaks PARAMS((SHELL_VAR *));
+static SHELL_VAR *assign_comp_wordbreaks PARAMS((SHELL_VAR *, char *, arrayind_t, char *));
+#endif
+
+#if defined (PUSHD_AND_POPD) && defined (ARRAY_VARS)
+static SHELL_VAR *assign_dirstack PARAMS((SHELL_VAR *, char *, arrayind_t, char *));
+static SHELL_VAR *get_dirstack PARAMS((SHELL_VAR *));
+#endif
+
+#if defined (ARRAY_VARS)
+static SHELL_VAR *get_groupset PARAMS((SHELL_VAR *));
+#  if defined (DEBUGGER)
+static SHELL_VAR *get_bashargcv PARAMS((SHELL_VAR *));
+#  endif
+static SHELL_VAR *build_hashcmd PARAMS((SHELL_VAR *));
+static SHELL_VAR *get_hashcmd PARAMS((SHELL_VAR *));
+static SHELL_VAR *assign_hashcmd PARAMS((SHELL_VAR *,  char *, arrayind_t, char *));
+#  if defined (ALIAS)
+static SHELL_VAR *build_aliasvar PARAMS((SHELL_VAR *));
+static SHELL_VAR *get_aliasvar PARAMS((SHELL_VAR *));
+static SHELL_VAR *assign_aliasvar PARAMS((SHELL_VAR *,  char *, arrayind_t, char *));
+#  endif
+#endif
+
+static SHELL_VAR *get_funcname PARAMS((SHELL_VAR *));
+static SHELL_VAR *init_funcname_var PARAMS((void));
+
+static void initialize_dynamic_variables PARAMS((void));
+
+static SHELL_VAR *bind_invalid_envvar PARAMS((const char *, char *, int));
+
+static int var_sametype PARAMS((SHELL_VAR *, SHELL_VAR *));
+
+static SHELL_VAR *hash_lookup PARAMS((const char *, HASH_TABLE *));
+static SHELL_VAR *new_shell_variable PARAMS((const char *));
+static SHELL_VAR *make_new_variable PARAMS((const char *, HASH_TABLE *));
+static SHELL_VAR *bind_variable_internal PARAMS((const char *, char *, HASH_TABLE *, int, int));
+
+static void dispose_variable_value PARAMS((SHELL_VAR *));
+static void free_variable_hash_data PARAMS((PTR_T));
+
+static VARLIST *vlist_alloc PARAMS((int));
+static VARLIST *vlist_realloc PARAMS((VARLIST *, int));
+static void vlist_add PARAMS((VARLIST *, SHELL_VAR *, int));
+
+static void flatten PARAMS((HASH_TABLE *, sh_var_map_func_t *, VARLIST *, int));
+
+static int qsort_var_comp PARAMS((SHELL_VAR **, SHELL_VAR **));
+
+static SHELL_VAR **vapply PARAMS((sh_var_map_func_t *));
+static SHELL_VAR **fapply PARAMS((sh_var_map_func_t *));
+
+static int visible_var PARAMS((SHELL_VAR *));
+static int visible_and_exported PARAMS((SHELL_VAR *));
+static int export_environment_candidate PARAMS((SHELL_VAR *));
+static int local_and_exported PARAMS((SHELL_VAR *));
+static int visible_variable_in_context PARAMS((SHELL_VAR *));
+static int variable_in_context PARAMS((SHELL_VAR *));
+#if defined (ARRAY_VARS)
+static int visible_array_vars PARAMS((SHELL_VAR *));
+#endif
+
+static SHELL_VAR *find_variable_internal PARAMS((const char *, int));
+
+static SHELL_VAR *find_nameref_at_context PARAMS((SHELL_VAR *, VAR_CONTEXT *));
+static SHELL_VAR *find_variable_nameref_context PARAMS((SHELL_VAR *, VAR_CONTEXT *, VAR_CONTEXT **));
+static SHELL_VAR *find_variable_last_nameref_context PARAMS((SHELL_VAR *, VAR_CONTEXT *, VAR_CONTEXT **));
+
+static SHELL_VAR *bind_tempenv_variable PARAMS((const char *, char *));
+static void push_posix_temp_var PARAMS((PTR_T));
+static void push_temp_var PARAMS((PTR_T));
+static void propagate_temp_var PARAMS((PTR_T));
+static void dispose_temporary_env PARAMS((sh_free_func_t *));     
+
+static inline char *mk_env_string PARAMS((const char *, const char *, int));
+static char **make_env_array_from_var_list PARAMS((SHELL_VAR **));
+static char **make_var_export_array PARAMS((VAR_CONTEXT *));
+static char **make_func_export_array PARAMS((void));
+static void add_temp_array_to_env PARAMS((char **, int, int));
+
+static int n_shell_variables PARAMS((void));
+static int set_context PARAMS((SHELL_VAR *));
+
+static void push_func_var PARAMS((PTR_T));
+static void push_builtin_var PARAMS((PTR_T));
+static void push_exported_var PARAMS((PTR_T));
+
+/* This needs to be looked at again. */
+static inline void push_posix_tempvar_internal PARAMS((SHELL_VAR *, int));
+
+static inline int find_special_var PARAMS((const char *));
+
+static void
+create_variable_tables ()
+{
+  if (shell_variables == 0)
+    {
+      shell_variables = global_variables = new_var_context ((char *)NULL, 0);
+      shell_variables->scope = 0;
+      shell_variables->table = hash_create (VARIABLES_HASH_BUCKETS);
+    }
+
+  if (shell_functions == 0)
+    shell_functions = hash_create (FUNCTIONS_HASH_BUCKETS);
+
+#if defined (DEBUGGER)
+  if (shell_function_defs == 0)
+    shell_function_defs = hash_create (FUNCTIONS_HASH_BUCKETS);
+#endif
+}
+
+/* Initialize the shell variables from the current environment.
+   If PRIVMODE is nonzero, don't import functions from ENV or
+   parse $SHELLOPTS. */
+void
+initialize_shell_variables (env, privmode)
+     char **env;
+     int privmode;
+{
+  char *name, *string, *temp_string;
+  int c, char_index, string_index, string_length, ro;
+  SHELL_VAR *temp_var;
+
+  create_variable_tables ();
+
+  for (string_index = 0; env && (string = env[string_index++]); )
+    {
+      char_index = 0;
+      name = string;
+      while ((c = *string++) && c != '=')
+	;
+      if (string[-1] == '=')
+	char_index = string - name - 1;
+
+      /* If there are weird things in the environment, like `=xxx' or a
+	 string without an `=', just skip them. */
+      if (char_index == 0)
+	continue;
+
+      /* ASSERT(name[char_index] == '=') */
+      name[char_index] = '\0';
+      /* Now, name = env variable name, string = env variable value, and
+	 char_index == strlen (name) */
+
+      temp_var = (SHELL_VAR *)NULL;
+
+#if defined (FUNCTION_IMPORT)
+      /* If exported function, define it now.  Don't import functions from
+	 the environment in privileged mode. */
+      if (privmode == 0 && read_but_dont_execute == 0 && 
+          STREQN (BASHFUNC_PREFIX, name, BASHFUNC_PREFLEN) &&
+          STREQ (BASHFUNC_SUFFIX, name + char_index - BASHFUNC_SUFFLEN) &&
+	  STREQN ("() {", string, 4))
+	{
+	  size_t namelen;
+	  char *tname;		/* desired imported function name */
+
+	  namelen = char_index - BASHFUNC_PREFLEN - BASHFUNC_SUFFLEN;
+
+	  tname = name + BASHFUNC_PREFLEN;	/* start of func name */
+	  tname[namelen] = '\0';		/* now tname == func name */
+
+	  string_length = strlen (string);
+	  temp_string = (char *)xmalloc (namelen + string_length + 2);
+
+	  memcpy (temp_string, tname, namelen);
+	  temp_string[namelen] = ' ';
+	  memcpy (temp_string + namelen + 1, string, string_length + 1);
+
+	  /* Don't import function names that are invalid identifiers from the
+	     environment in posix mode, though we still allow them to be defined as
+	     shell variables. */
+	  if (absolute_program (tname) == 0 && (posixly_correct == 0 || legal_identifier (tname)))
+	    parse_and_execute (temp_string, tname, SEVAL_NONINT|SEVAL_NOHIST|SEVAL_FUNCDEF|SEVAL_ONECMD);
+	  else
+	    free (temp_string);		/* parse_and_execute does this */
+
+	  if (temp_var = find_function (tname))
+	    {
+	      VSETATTR (temp_var, (att_exported|att_imported));
+	      array_needs_making = 1;
+	    }
+	  else
+	    {
+	      if (temp_var = bind_invalid_envvar (name, string, 0))
+		{
+		  VSETATTR (temp_var, (att_exported | att_imported | att_invisible));
+		  array_needs_making = 1;
+		}
+	      last_command_exit_value = EXECUTION_FAILURE;
+	      report_error (_("error importing function definition for `%s'"), tname);
+	    }
+
+	  /* Restore original suffix */
+	  tname[namelen] = BASHFUNC_SUFFIX[0];
+	}
+      else
+#endif /* FUNCTION_IMPORT */
+#if defined (ARRAY_VARS)
+#  if ARRAY_EXPORT
+      /* Array variables may not yet be exported. */
+      if (*string == '(' && string[1] == '[' && string[strlen (string) - 1] == ')')
+	{
+	  string_length = 1;
+	  temp_string = extract_array_assignment_list (string, &string_length);
+	  temp_var = assign_array_from_string (name, temp_string, 0);
+	  FREE (temp_string);
+	  VSETATTR (temp_var, (att_exported | att_imported));
+	  array_needs_making = 1;
+	}
+      else
+#  endif /* ARRAY_EXPORT */
+#endif
+	{
+	  ro = 0;
+	  /* If we processed a command-line option that caused SHELLOPTS to be
+	     set, it may already be set (and read-only) by the time we process
+	     the shell's environment. */
+	  if (/* posixly_correct &&*/ STREQ (name, "SHELLOPTS"))
+	    {
+	      temp_var = find_variable ("SHELLOPTS");
+	      ro = temp_var && readonly_p (temp_var);
+	      if (temp_var)
+		VUNSETATTR (temp_var, att_readonly);
+	    }
+	  if (legal_identifier (name))
+	    {
+	      temp_var = bind_variable (name, string, 0);
+	      if (temp_var)
+		{
+		  VSETATTR (temp_var, (att_exported | att_imported));
+		  if (ro)
+		    VSETATTR (temp_var, att_readonly);
+		}
+	    }
+	  else
+	    {
+	      temp_var = bind_invalid_envvar (name, string, 0);
+	      if (temp_var)
+		VSETATTR (temp_var, (att_exported | att_imported | att_invisible));
+	    }
+	  if (temp_var)
+	    array_needs_making = 1;
+	}
+
+      name[char_index] = '=';
+      /* temp_var can be NULL if it was an exported function with a syntax
+	 error (a different bug, but it still shouldn't dump core). */
+      if (temp_var && function_p (temp_var) == 0)	/* XXX not yet */
+	{
+	  CACHE_IMPORTSTR (temp_var, name);
+	}
+    }
+
+  set_pwd ();
+
+  /* Set up initial value of $_ */
+  temp_var = set_if_not ("_", dollar_vars[0]);
+
+  /* Remember this pid. */
+  dollar_dollar_pid = getpid ();
+
+  /* Now make our own defaults in case the vars that we think are
+     important are missing. */
+  temp_var = set_if_not ("PATH", DEFAULT_PATH_VALUE);
+  temp_var = set_if_not ("TERM", "dumb");
+
+#if defined (__QNX__)
+  /* set node id -- don't import it from the environment */
+  {
+    char node_name[22];
+#  if defined (__QNXNTO__)
+    netmgr_ndtostr(ND2S_LOCAL_STR, ND_LOCAL_NODE, node_name, sizeof(node_name));
+#  else
+    qnx_nidtostr (getnid (), node_name, sizeof (node_name));
+#  endif
+    temp_var = bind_variable ("NODE", node_name, 0);
+    if (temp_var)
+      set_auto_export (temp_var);
+  }
+#endif
+
+  /* set up the prompts. */
+  if (interactive_shell)
+    {
+#if defined (PROMPT_STRING_DECODE)
+      set_if_not ("PS1", primary_prompt);
+#else
+      if (current_user.uid == -1)
+	get_current_user_info ();
+      set_if_not ("PS1", current_user.euid == 0 ? "# " : primary_prompt);
+#endif
+      set_if_not ("PS2", secondary_prompt);
+    }
+
+  if (current_user.euid == 0)
+    bind_variable ("PS4", "+ ", 0);
+  else
+    set_if_not ("PS4", "+ ");
+
+  /* Don't allow IFS to be imported from the environment. */
+  temp_var = bind_variable ("IFS", " \t\n", 0);
+  setifs (temp_var);
+
+  /* Magic machine types.  Pretty convenient. */
+  set_machine_vars ();
+
+  /* Default MAILCHECK for interactive shells.  Defer the creation of a
+     default MAILPATH until the startup files are read, because MAIL
+     names a mail file if MAILPATH is not set, and we should provide a
+     default only if neither is set. */
+  if (interactive_shell)
+    {
+      temp_var = set_if_not ("MAILCHECK", posixly_correct ? "600" : "60");
+      VSETATTR (temp_var, att_integer);
+    }
+
+  /* Do some things with shell level. */
+  initialize_shell_level ();
+
+  set_ppid ();
+
+  set_argv0 ();
+
+  /* Initialize the `getopts' stuff. */
+  temp_var = bind_variable ("OPTIND", "1", 0);
+  VSETATTR (temp_var, att_integer);
+  getopts_reset (0);
+  bind_variable ("OPTERR", "1", 0);
+  sh_opterr = 1;
+
+  if (login_shell == 1 && posixly_correct == 0)
+    set_home_var ();
+
+  /* Get the full pathname to THIS shell, and set the BASH variable
+     to it. */
+  name = get_bash_name ();
+  temp_var = bind_variable ("BASH", name, 0);
+  free (name);
+
+  /* Make the exported environment variable SHELL be the user's login
+     shell.  Note that the `tset' command looks at this variable
+     to determine what style of commands to output; if it ends in "csh",
+     then C-shell commands are output, else Bourne shell commands. */
+  set_shell_var ();
+
+  /* Make a variable called BASH_VERSION which contains the version info. */
+  bind_variable ("BASH_VERSION", shell_version_string (), 0);
+#if defined (ARRAY_VARS)
+  make_vers_array ();
+#endif
+
+  if (command_execution_string)
+    bind_variable ("BASH_EXECUTION_STRING", command_execution_string, 0);
+
+  /* Find out if we're supposed to be in Posix.2 mode via an
+     environment variable. */
+  temp_var = find_variable ("POSIXLY_CORRECT");
+  if (!temp_var)
+    temp_var = find_variable ("POSIX_PEDANTIC");
+  if (temp_var && imported_p (temp_var))
+    sv_strict_posix (temp_var->name);
+
+#if defined (HISTORY)
+  /* Set history variables to defaults, and then do whatever we would
+     do if the variable had just been set.  Do this only in the case
+     that we are remembering commands on the history list. */
+  if (remember_on_history)
+    {
+      name = bash_tilde_expand (posixly_correct ? "~/.sh_history" : "~/.bash_history", 0);
+
+      set_if_not ("HISTFILE", name);
+      free (name);
+    }
+#endif /* HISTORY */
+
+  /* Seed the random number generators. */
+  seedrand ();
+  seedrand32 ();
+
+  /* Handle some "special" variables that we may have inherited from a
+     parent shell. */
+  if (interactive_shell)
+    {
+      temp_var = find_variable ("IGNOREEOF");
+      if (!temp_var)
+	temp_var = find_variable ("ignoreeof");
+      if (temp_var && imported_p (temp_var))
+	sv_ignoreeof (temp_var->name);
+    }
+
+#if defined (HISTORY)
+  if (interactive_shell && remember_on_history)
+    {
+      sv_history_control ("HISTCONTROL");
+      sv_histignore ("HISTIGNORE");
+      sv_histtimefmt ("HISTTIMEFORMAT");
+    }
+#endif /* HISTORY */
+
+#if defined (READLINE) && defined (STRICT_POSIX)
+  /* POSIXLY_CORRECT will be 1 here if the shell was compiled
+     -DSTRICT_POSIX or if POSIXLY_CORRECT was supplied in the shell's
+     environment */
+  if (interactive_shell && posixly_correct && no_line_editing == 0)
+    rl_prefer_env_winsize = 1;
+#endif /* READLINE && STRICT_POSIX */
+
+     /*
+      * 24 October 2001
+      *
+      * I'm tired of the arguing and bug reports.  Bash now leaves SSH_CLIENT
+      * and SSH2_CLIENT alone.  I'm going to rely on the shell_level check in
+      * isnetconn() to avoid running the startup files more often than wanted.
+      * That will, of course, only work if the user's login shell is bash, so
+      * I've made that behavior conditional on SSH_SOURCE_BASHRC being defined
+      * in config-top.h.
+      */
+#if 0
+  temp_var = find_variable ("SSH_CLIENT");
+  if (temp_var && imported_p (temp_var))
+    {
+      VUNSETATTR (temp_var, att_exported);
+      array_needs_making = 1;
+    }
+  temp_var = find_variable ("SSH2_CLIENT");
+  if (temp_var && imported_p (temp_var))
+    {
+      VUNSETATTR (temp_var, att_exported);
+      array_needs_making = 1;
+    }
+#endif
+
+  /* Get the user's real and effective user ids. */
+  uidset ();
+
+  temp_var = find_variable ("BASH_XTRACEFD");
+  if (temp_var && imported_p (temp_var))
+    sv_xtracefd (temp_var->name);
+
+  sv_shcompat ("BASH_COMPAT");
+
+  /* Allow FUNCNEST to be inherited from the environment. */
+  sv_funcnest ("FUNCNEST");
+
+  /* Initialize the dynamic variables, and seed their values. */
+  initialize_dynamic_variables ();
+}
+
+/* **************************************************************** */
+/*								    */
+/*	     Setting values for special shell variables		    */
+/*								    */
+/* **************************************************************** */
+
+static void
+set_machine_vars ()
+{
+  SHELL_VAR *temp_var;
+
+  temp_var = set_if_not ("HOSTTYPE", HOSTTYPE);
+  temp_var = set_if_not ("OSTYPE", OSTYPE);
+  temp_var = set_if_not ("MACHTYPE", MACHTYPE);
+
+  temp_var = set_if_not ("HOSTNAME", current_host_name);
+}
+
+/* Set $HOME to the information in the password file if we didn't get
+   it from the environment. */
+
+/* This function is not static so the tilde and readline libraries can
+   use it. */
+char *
+sh_get_home_dir ()
+{
+  if (current_user.home_dir == 0)
+    get_current_user_info ();
+  return current_user.home_dir;
+}
+
+static void
+set_home_var ()
+{
+  SHELL_VAR *temp_var;
+
+  temp_var = find_variable ("HOME");
+  if (temp_var == 0)
+    temp_var = bind_variable ("HOME", sh_get_home_dir (), 0);
+#if 0
+  VSETATTR (temp_var, att_exported);
+#endif
+}
+
+/* Set $SHELL to the user's login shell if it is not already set.  Call
+   get_current_user_info if we haven't already fetched the shell. */
+static void
+set_shell_var ()
+{
+  SHELL_VAR *temp_var;
+
+  temp_var = find_variable ("SHELL");
+  if (temp_var == 0)
+    {
+      if (current_user.shell == 0)
+	get_current_user_info ();
+      temp_var = bind_variable ("SHELL", current_user.shell, 0);
+    }
+#if 0
+  VSETATTR (temp_var, att_exported);
+#endif
+}
+
+static char *
+get_bash_name ()
+{
+  char *name;
+
+  if ((login_shell == 1) && RELPATH(shell_name))
+    {
+      if (current_user.shell == 0)
+	get_current_user_info ();
+      name = savestring (current_user.shell);
+    }
+  else if (ABSPATH(shell_name))
+    name = savestring (shell_name);
+  else if (shell_name[0] == '.' && shell_name[1] == '/')
+    {
+      /* Fast path for common case. */
+      char *cdir;
+      int len;
+
+      cdir = get_string_value ("PWD");
+      if (cdir)
+	{
+	  len = strlen (cdir);
+	  name = (char *)xmalloc (len + strlen (shell_name) + 1);
+	  strcpy (name, cdir);
+	  strcpy (name + len, shell_name + 1);
+	}
+      else
+	name = savestring (shell_name);
+    }
+  else
+    {
+      char *tname;
+      int s;
+
+      tname = find_user_command (shell_name);
+
+      if (tname == 0)
+	{
+	  /* Try the current directory.  If there is not an executable
+	     there, just punt and use the login shell. */
+	  s = file_status (shell_name);
+	  if (s & FS_EXECABLE)
+	    {
+	      tname = make_absolute (shell_name, get_string_value ("PWD"));
+	      if (*shell_name == '.')
+		{
+		  name = sh_canonpath (tname, PATH_CHECKDOTDOT|PATH_CHECKEXISTS);
+		  if (name == 0)
+		    name = tname;
+		  else
+		    free (tname);
+		}
+	     else
+		name = tname;
+	    }
+	  else
+	    {
+	      if (current_user.shell == 0)
+		get_current_user_info ();
+	      name = savestring (current_user.shell);
+	    }
+	}
+      else
+	{
+	  name = full_pathname (tname);
+	  free (tname);
+	}
+    }
+
+  return (name);
+}
+
+void
+adjust_shell_level (change)
+     int change;
+{
+  char new_level[5], *old_SHLVL;
+  intmax_t old_level;
+  SHELL_VAR *temp_var;
+
+  old_SHLVL = get_string_value ("SHLVL");
+  if (old_SHLVL == 0 || *old_SHLVL == '\0' || legal_number (old_SHLVL, &old_level) == 0)
+    old_level = 0;
+
+  shell_level = old_level + change;
+  if (shell_level < 0)
+    shell_level = 0;
+  else if (shell_level >= 1000)
+    {
+      internal_warning (_("shell level (%d) too high, resetting to 1"), shell_level);
+      shell_level = 1;
+    }
+
+  /* We don't need the full generality of itos here. */
+  if (shell_level < 10)
+    {
+      new_level[0] = shell_level + '0';
+      new_level[1] = '\0';
+    }
+  else if (shell_level < 100)
+    {
+      new_level[0] = (shell_level / 10) + '0';
+      new_level[1] = (shell_level % 10) + '0';
+      new_level[2] = '\0';
+    }
+  else if (shell_level < 1000)
+    {
+      new_level[0] = (shell_level / 100) + '0';
+      old_level = shell_level % 100;
+      new_level[1] = (old_level / 10) + '0';
+      new_level[2] = (old_level % 10) + '0';
+      new_level[3] = '\0';
+    }
+
+  temp_var = bind_variable ("SHLVL", new_level, 0);
+  set_auto_export (temp_var);
+}
+
+static void
+initialize_shell_level ()
+{
+  adjust_shell_level (1);
+}
+
+/* If we got PWD from the environment, update our idea of the current
+   working directory.  In any case, make sure that PWD exists before
+   checking it.  It is possible for getcwd () to fail on shell startup,
+   and in that case, PWD would be undefined.  If this is an interactive
+   login shell, see if $HOME is the current working directory, and if
+   that's not the same string as $PWD, set PWD=$HOME. */
+
+void
+set_pwd ()
+{
+  SHELL_VAR *temp_var, *home_var;
+  char *temp_string, *home_string, *current_dir;
+
+  home_var = find_variable ("HOME");
+  home_string = home_var ? value_cell (home_var) : (char *)NULL;
+
+  temp_var = find_variable ("PWD");
+  /* Follow posix rules for importing PWD */
+  if (temp_var && imported_p (temp_var) &&
+      (temp_string = value_cell (temp_var)) &&
+      temp_string[0] == '/' &&
+      same_file (temp_string, ".", (struct stat *)NULL, (struct stat *)NULL))
+    {
+      current_dir = sh_canonpath (temp_string, PATH_CHECKDOTDOT|PATH_CHECKEXISTS);
+      if (current_dir == 0)
+	current_dir = get_working_directory ("shell_init");
+      else
+	set_working_directory (current_dir);
+      if (posixly_correct && current_dir)
+	{
+	  temp_var = bind_variable ("PWD", current_dir, 0);
+	  set_auto_export (temp_var);
+	}  
+      free (current_dir);
+    }
+  else if (home_string && interactive_shell && login_shell &&
+	   same_file (home_string, ".", (struct stat *)NULL, (struct stat *)NULL))
+    {
+      set_working_directory (home_string);
+      temp_var = bind_variable ("PWD", home_string, 0);
+      set_auto_export (temp_var);
+    }
+  else
+    {
+      temp_string = get_working_directory ("shell-init");
+      if (temp_string)
+	{
+	  temp_var = bind_variable ("PWD", temp_string, 0);
+	  set_auto_export (temp_var);
+	  free (temp_string);
+	}
+    }
+
+  /* According to the Single Unix Specification, v2, $OLDPWD is an
+     `environment variable' and therefore should be auto-exported.  If we
+     don't find OLDPWD in the environment, or it doesn't name a directory,
+     make a dummy invisible variable for OLDPWD, and mark it as exported. */
+  temp_var = find_variable ("OLDPWD");
+#if defined (OLDPWD_CHECK_DIRECTORY)
+  if (temp_var == 0 || value_cell (temp_var) == 0 || file_isdir (value_cell (temp_var)) == 0)
+#else
+  if (temp_var == 0 || value_cell (temp_var) == 0)
+#endif
+    {
+      temp_var = bind_variable ("OLDPWD", (char *)NULL, 0);
+      VSETATTR (temp_var, (att_exported | att_invisible));
+    }
+}
+
+/* Make a variable $PPID, which holds the pid of the shell's parent.  */
+void
+set_ppid ()
+{
+  char namebuf[INT_STRLEN_BOUND(pid_t) + 1], *name;
+  SHELL_VAR *temp_var;
+
+  name = inttostr (getppid (), namebuf, sizeof(namebuf));
+  temp_var = find_variable ("PPID");
+  if (temp_var)
+    VUNSETATTR (temp_var, (att_readonly | att_exported));
+  temp_var = bind_variable ("PPID", name, 0);
+  VSETATTR (temp_var, (att_readonly | att_integer));
+}
+
+static void
+uidset ()
+{
+  char buff[INT_STRLEN_BOUND(uid_t) + 1], *b;
+  register SHELL_VAR *v;
+
+  b = inttostr (current_user.uid, buff, sizeof (buff));
+  v = find_variable ("UID");
+  if (v == 0)
+    {
+      v = bind_variable ("UID", b, 0);
+      VSETATTR (v, (att_readonly | att_integer));
+    }
+
+  if (current_user.euid != current_user.uid)
+    b = inttostr (current_user.euid, buff, sizeof (buff));
+
+  v = find_variable ("EUID");
+  if (v == 0)
+    {
+      v = bind_variable ("EUID", b, 0);
+      VSETATTR (v, (att_readonly | att_integer));
+    }
+}
+
+#if defined (ARRAY_VARS)
+static void
+make_vers_array ()
+{
+  SHELL_VAR *vv;
+  ARRAY *av;
+  char *s, d[32], b[INT_STRLEN_BOUND(int) + 1];
+
+  unbind_variable_noref ("BASH_VERSINFO");
+
+  vv = make_new_array_variable ("BASH_VERSINFO");
+  av = array_cell (vv);
+  strcpy (d, dist_version);
+  s = strchr (d, '.');
+  if (s)
+    *s++ = '\0';
+  array_insert (av, 0, d);
+  array_insert (av, 1, s);
+  s = inttostr (patch_level, b, sizeof (b));
+  array_insert (av, 2, s);
+  s = inttostr (build_version, b, sizeof (b));
+  array_insert (av, 3, s);
+  array_insert (av, 4, release_status);
+  array_insert (av, 5, MACHTYPE);
+
+  VSETATTR (vv, att_readonly);
+}
+#endif /* ARRAY_VARS */
+
+/* Set the environment variables $LINES and $COLUMNS in response to
+   a window size change. */
+void
+sh_set_lines_and_columns (lines, cols)
+     int lines, cols;
+{
+  char val[INT_STRLEN_BOUND(int) + 1], *v;
+
+#if defined (READLINE)
+  /* If we are currently assigning to LINES or COLUMNS, don't do anything. */
+  if (winsize_assignment)
+    return;
+#endif
+
+  v = inttostr (lines, val, sizeof (val));
+  bind_variable ("LINES", v, 0);
+
+  v = inttostr (cols, val, sizeof (val));
+  bind_variable ("COLUMNS", v, 0);
+}
+
+/* **************************************************************** */
+/*								    */
+/*		   Printing variables and values		    */
+/*								    */
+/* **************************************************************** */
+
+/* Print LIST (a list of shell variables) to stdout in such a way that
+   they can be read back in. */
+void
+print_var_list (list)
+     register SHELL_VAR **list;
+{
+  register int i;
+  register SHELL_VAR *var;
+
+  for (i = 0; list && (var = list[i]); i++)
+    if (invisible_p (var) == 0)
+      print_assignment (var);
+}
+
+/* Print LIST (a list of shell functions) to stdout in such a way that
+   they can be read back in. */
+void
+print_func_list (list)
+     register SHELL_VAR **list;
+{
+  register int i;
+  register SHELL_VAR *var;
+
+  for (i = 0; list && (var = list[i]); i++)
+    {
+      printf ("%s ", var->name);
+      print_var_function (var);
+      printf ("\n");
+    }
+}
+      
+/* Print the value of a single SHELL_VAR.  No newline is
+   output, but the variable is printed in such a way that
+   it can be read back in. */
+void
+print_assignment (var)
+     SHELL_VAR *var;
+{
+  if (var_isset (var) == 0)
+    return;
+
+  if (function_p (var))
+    {
+      printf ("%s", var->name);
+      print_var_function (var);
+      printf ("\n");
+    }
+#if defined (ARRAY_VARS)
+  else if (array_p (var))
+    print_array_assignment (var, 0);
+  else if (assoc_p (var))
+    print_assoc_assignment (var, 0);
+#endif /* ARRAY_VARS */
+  else
+    {
+      printf ("%s=", var->name);
+      print_var_value (var, 1);
+      printf ("\n");
+    }
+}
+
+/* Print the value cell of VAR, a shell variable.  Do not print
+   the name, nor leading/trailing newline.  If QUOTE is non-zero,
+   and the value contains shell metacharacters, quote the value
+   in such a way that it can be read back in. */
+void
+print_var_value (var, quote)
+     SHELL_VAR *var;
+     int quote;
+{
+  char *t;
+
+  if (var_isset (var) == 0)
+    return;
+
+  if (quote && posixly_correct == 0 && ansic_shouldquote (value_cell (var)))
+    {
+      t = ansic_quote (value_cell (var), 0, (int *)0);
+      printf ("%s", t);
+      free (t);
+    }
+  else if (quote && sh_contains_shell_metas (value_cell (var)))
+    {
+      t = sh_single_quote (value_cell (var));
+      printf ("%s", t);
+      free (t);
+    }
+  else
+    printf ("%s", value_cell (var));
+}
+
+/* Print the function cell of VAR, a shell variable.  Do not
+   print the name, nor leading/trailing newline. */
+void
+print_var_function (var)
+     SHELL_VAR *var;
+{
+  char *x;
+
+  if (function_p (var) && var_isset (var))
+    {
+      x = named_function_string ((char *)NULL, function_cell(var), FUNC_MULTILINE|FUNC_EXTERNAL);
+      printf ("%s", x);
+    }
+}
+
+/* **************************************************************** */
+/*								    */
+/*		 	Dynamic Variables			    */
+/*								    */
+/* **************************************************************** */
+
+/* DYNAMIC VARIABLES
+
+   These are variables whose values are generated anew each time they are
+   referenced.  These are implemented using a pair of function pointers
+   in the struct variable: assign_func, which is called from bind_variable
+   and, if arrays are compiled into the shell, some of the functions in
+   arrayfunc.c, and dynamic_value, which is called from find_variable.
+
+   assign_func is called from bind_variable_internal, if
+   bind_variable_internal discovers that the variable being assigned to
+   has such a function.  The function is called as
+	SHELL_VAR *temp = (*(entry->assign_func)) (entry, value, ind)
+   and the (SHELL_VAR *)temp is returned as the value of bind_variable.  It
+   is usually ENTRY (self).  IND is an index for an array variable, and
+   unused otherwise.
+
+   dynamic_value is called from find_variable_internal to return a `new'
+   value for the specified dynamic variable.  If this function is NULL,
+   the variable is treated as a `normal' shell variable.  If it is not,
+   however, then this function is called like this:
+	tempvar = (*(var->dynamic_value)) (var);
+
+   Sometimes `tempvar' will replace the value of `var'.  Other times, the
+   shell will simply use the string value.  Pretty object-oriented, huh?
+
+   Be warned, though: if you `unset' a special variable, it loses its
+   special meaning, even if you subsequently set it.
+
+   The special assignment code would probably have been better put in
+   subst.c: do_assignment_internal, in the same style as
+   stupidly_hack_special_variables, but I wanted the changes as
+   localized as possible.  */
+
+#define INIT_DYNAMIC_VAR(var, val, gfunc, afunc) \
+  do \
+    { \
+      v = bind_variable (var, (val), 0); \
+      v->dynamic_value = gfunc; \
+      v->assign_func = afunc; \
+    } \
+  while (0)
+
+#define INIT_DYNAMIC_ARRAY_VAR(var, gfunc, afunc) \
+  do \
+    { \
+      v = make_new_array_variable (var); \
+      v->dynamic_value = gfunc; \
+      v->assign_func = afunc; \
+    } \
+  while (0)
+
+#define INIT_DYNAMIC_ASSOC_VAR(var, gfunc, afunc) \
+  do \
+    { \
+      v = make_new_assoc_variable (var); \
+      v->dynamic_value = gfunc; \
+      v->assign_func = afunc; \
+    } \
+  while (0)
+
+static SHELL_VAR *
+null_assign (self, value, unused, key)
+     SHELL_VAR *self;
+     char *value;
+     arrayind_t unused;
+     char *key;
+{
+  return (self);
+}
+
+#if defined (ARRAY_VARS)
+static SHELL_VAR *
+null_array_assign (self, value, ind, key)
+     SHELL_VAR *self;
+     char *value;
+     arrayind_t ind;
+     char *key;
+{
+  return (self);
+}
+#endif
+
+/* Degenerate `dynamic_value' function; just returns what's passed without
+   manipulation. */
+static SHELL_VAR *
+get_self (self)
+     SHELL_VAR *self;
+{
+  return (self);
+}
+
+#if defined (ARRAY_VARS)
+/* A generic dynamic array variable initializer.  Initialize array variable
+   NAME with dynamic value function GETFUNC and assignment function SETFUNC. */
+static SHELL_VAR *
+init_dynamic_array_var (name, getfunc, setfunc, attrs)
+     char *name;
+     sh_var_value_func_t *getfunc;
+     sh_var_assign_func_t *setfunc;
+     int attrs;
+{
+  SHELL_VAR *v;
+
+  v = find_variable (name);
+  if (v)
+    return (v);
+  INIT_DYNAMIC_ARRAY_VAR (name, getfunc, setfunc);
+  if (attrs)
+    VSETATTR (v, attrs);
+  return v;
+}
+
+static SHELL_VAR *
+init_dynamic_assoc_var (name, getfunc, setfunc, attrs)
+     char *name;
+     sh_var_value_func_t *getfunc;
+     sh_var_assign_func_t *setfunc;
+     int attrs;
+{
+  SHELL_VAR *v;
+
+  v = find_variable (name);
+  if (v)
+    return (v);
+  INIT_DYNAMIC_ASSOC_VAR (name, getfunc, setfunc);
+  if (attrs)
+    VSETATTR (v, attrs);
+  return v;
+}
+#endif
+
+/* The value of $SECONDS.  This is the number of seconds since shell
+   invocation, or, the number of seconds since the last assignment + the
+   value of the last assignment. */
+static intmax_t seconds_value_assigned;
+
+static SHELL_VAR *
+assign_seconds (self, value, unused, key)
+     SHELL_VAR *self;
+     char *value;
+     arrayind_t unused;
+     char *key;
+{
+  intmax_t nval;
+  int expok;
+
+  if (integer_p (self))
+    nval = evalexp (value, 0, &expok);
+  else
+    expok = legal_number (value, &nval);
+  seconds_value_assigned = expok ? nval : 0;
+  gettimeofday (&shellstart, NULL);
+  shell_start_time = shellstart.tv_sec;
+  return (self);
+}
+
+static SHELL_VAR *
+get_seconds (var)
+     SHELL_VAR *var;
+{
+  time_t time_since_start;
+  char *p;
+  struct timeval tv;
+
+  gettimeofday(&tv, NULL);
+  time_since_start = tv.tv_sec - shell_start_time;
+  p = itos(seconds_value_assigned + time_since_start);
+
+  FREE (value_cell (var));
+
+  VSETATTR (var, att_integer);
+  var_setvalue (var, p);
+  return (var);
+}
+
+static SHELL_VAR *
+init_seconds_var ()
+{
+  SHELL_VAR *v;
+
+  v = find_variable ("SECONDS");
+  if (v)
+    {
+      if (legal_number (value_cell(v), &seconds_value_assigned) == 0)
+	seconds_value_assigned = 0;
+    }
+  INIT_DYNAMIC_VAR ("SECONDS", (v ? value_cell (v) : (char *)NULL), get_seconds, assign_seconds);
+  return v;      
+}
+
+/* Functions for $RANDOM and $SRANDOM */
+
+int last_random_value;
+static int seeded_subshell = 0;
+
+static SHELL_VAR *
+assign_random (self, value, unused, key)
+     SHELL_VAR *self;
+     char *value;
+     arrayind_t unused;
+     char *key;
+{
+  intmax_t seedval;
+  int expok;
+
+  if (integer_p (self))
+    seedval = evalexp (value, 0, &expok);
+  else
+    expok = legal_number (value, &seedval);
+  if (expok == 0)
+    return (self);
+  sbrand (seedval);
+  if (subshell_environment)
+    seeded_subshell = getpid ();
+  return (self);
+}
+
+int
+get_random_number ()
+{
+  int rv, pid;
+
+  /* Reset for command and process substitution. */
+  pid = getpid ();
+  if (subshell_environment && seeded_subshell != pid)
+    {
+      seedrand ();
+      seeded_subshell = pid;
+    }
+
+  do
+    rv = brand ();
+  while (rv == last_random_value);
+
+  return (last_random_value = rv);
+}
+
+static SHELL_VAR *
+get_random (var)
+     SHELL_VAR *var;
+{
+  int rv;
+  char *p;
+
+  rv = get_random_number ();
+  p = itos (rv);
+
+  FREE (value_cell (var));
+
+  VSETATTR (var, att_integer);
+  var_setvalue (var, p);
+  return (var);
+}
+
+static SHELL_VAR *
+get_urandom (var)
+     SHELL_VAR *var;
+{
+  u_bits32_t rv;
+  char *p;
+
+  rv = get_urandom32 ();
+  p = itos (rv);
+
+  FREE (value_cell (var));
+
+  VSETATTR (var, att_integer);
+  var_setvalue (var, p);
+  return (var);
+}
+
+static SHELL_VAR *
+assign_lineno (var, value, unused, key)
+     SHELL_VAR *var;
+     char *value;
+     arrayind_t unused;
+     char *key;
+{
+  intmax_t new_value;
+
+  if (value == 0 || *value == '\0' || legal_number (value, &new_value) == 0)
+    new_value = 0;
+  line_number = line_number_base = new_value;
+  return var;
+}
+
+/* Function which returns the current line number. */
+static SHELL_VAR *
+get_lineno (var)
+     SHELL_VAR *var;
+{
+  char *p;
+  int ln;
+
+  ln = executing_line_number ();
+  p = itos (ln);
+  FREE (value_cell (var));
+  var_setvalue (var, p);
+  return (var);
+}
+
+static SHELL_VAR *
+assign_subshell (var, value, unused, key)
+     SHELL_VAR *var;
+     char *value;
+     arrayind_t unused;
+     char *key;
+{
+  intmax_t new_value;
+
+  if (value == 0 || *value == '\0' || legal_number (value, &new_value) == 0)
+    new_value = 0;
+  subshell_level = new_value;
+  return var;
+}
+
+static SHELL_VAR *
+get_subshell (var)
+     SHELL_VAR *var;
+{
+  char *p;
+
+  p = itos (subshell_level);
+  FREE (value_cell (var));
+  var_setvalue (var, p);
+  return (var);
+}
+
+static SHELL_VAR *
+get_epochseconds (var)
+     SHELL_VAR *var;
+{
+  intmax_t now;
+  char *p;
+
+  now = NOW;
+  p = itos (now);
+
+  FREE (value_cell (var));
+  var_setvalue (var, p);
+  return (var);
+}
+
+static SHELL_VAR *
+get_epochrealtime (var)
+     SHELL_VAR *var;
+{
+  char buf[32];
+  char *p;
+  struct timeval tv;
+
+  gettimeofday (&tv, NULL);
+  snprintf (buf, sizeof (buf), "%u%c%06u", (unsigned)tv.tv_sec,
+					   locale_decpoint (),
+					   (unsigned)tv.tv_usec);
+
+  p = savestring (buf);
+  FREE (value_cell (var));
+  var_setvalue (var, p);
+  return (var);
+}
+
+static SHELL_VAR *
+get_bashpid (var)
+     SHELL_VAR *var;
+{
+  int pid;
+  char *p;
+
+  pid = getpid ();
+  p = itos (pid);
+
+  FREE (value_cell (var));
+  VSETATTR (var, att_integer);	/* XXX - was also att_readonly */
+  var_setvalue (var, p);
+  return (var);
+}
+
+static SHELL_VAR *
+get_bash_argv0 (var)
+     SHELL_VAR *var;
+{
+  char *p;
+
+  p = savestring (dollar_vars[0]);
+  FREE (value_cell (var));
+  var_setvalue (var, p);
+  return var;
+}
+
+static char *static_shell_name = 0;
+
+static SHELL_VAR *
+assign_bash_argv0 (var, value, unused, key)
+     SHELL_VAR *var;
+     char *value;
+     arrayind_t unused;
+     char *key;
+{
+  size_t vlen;
+
+  if (value == 0)
+    return var;
+
+  FREE (dollar_vars[0]);
+  dollar_vars[0] = savestring (value);
+
+  /* Need these gyrations because shell_name isn't dynamically allocated */
+  vlen = STRLEN (value);
+  static_shell_name = xrealloc (static_shell_name, vlen + 1);
+  strcpy (static_shell_name, value);
+  
+  shell_name = static_shell_name;
+  return var;
+}
+
+static void
+set_argv0 ()
+{
+  SHELL_VAR *v;
+
+  v = find_variable ("BASH_ARGV0");
+  if (v && imported_p (v))
+    assign_bash_argv0 (v, value_cell (v), 0, 0);
+}
+  
+static SHELL_VAR *
+get_bash_command (var)
+     SHELL_VAR *var;
+{
+  char *p;
+
+  if (the_printed_command_except_trap)
+    p = savestring (the_printed_command_except_trap);
+  else
+    {
+      p = (char *)xmalloc (1);
+      p[0] = '\0';
+    }
+  FREE (value_cell (var));
+  var_setvalue (var, p);
+  return (var);
+}
+
+#if defined (HISTORY)
+static SHELL_VAR *
+get_histcmd (var)
+     SHELL_VAR *var;
+{
+  char *p;
+  int n;
+
+  /* Do the same adjustment here we do in parse.y:prompt_history_number,
+     assuming that we are in one of two states: decoding this as part of
+     the prompt string, in which case we do not want to assume that the
+     command has been saved to the history and the history number incremented,
+     or the expansion is part of the current command being executed and has
+     already been saved to history and the history number incremented.
+     Right now we use EXECUTING as the determinant. */
+  n = history_number () - executing;
+  p = itos (n);
+  FREE (value_cell (var));
+  var_setvalue (var, p);
+  return (var);
+}
+#endif
+
+#if defined (READLINE)
+/* When this function returns, VAR->value points to malloced memory. */
+static SHELL_VAR *
+get_comp_wordbreaks (var)
+     SHELL_VAR *var;
+{
+  /* If we don't have anything yet, assign a default value. */
+  if (rl_completer_word_break_characters == 0 && bash_readline_initialized == 0)
+    enable_hostname_completion (perform_hostname_completion);
+
+  FREE (value_cell (var));
+  var_setvalue (var, savestring (rl_completer_word_break_characters));
+
+  return (var);
+}
+
+/* When this function returns, rl_completer_word_break_characters points to
+   malloced memory. */
+static SHELL_VAR *
+assign_comp_wordbreaks (self, value, unused, key)
+     SHELL_VAR *self;
+     char *value;
+     arrayind_t unused;
+     char *key;
+{
+  if (rl_completer_word_break_characters &&
+      rl_completer_word_break_characters != rl_basic_word_break_characters)
+    free (rl_completer_word_break_characters);
+
+  rl_completer_word_break_characters = savestring (value);
+  return self;
+}
+#endif /* READLINE */
+
+#if defined (PUSHD_AND_POPD) && defined (ARRAY_VARS)
+static SHELL_VAR *
+assign_dirstack (self, value, ind, key)
+     SHELL_VAR *self;
+     char *value;
+     arrayind_t ind;
+     char *key;
+{
+  set_dirstack_element (ind, 1, value);
+  return self;
+}
+
+static SHELL_VAR *
+get_dirstack (self)
+     SHELL_VAR *self;
+{
+  ARRAY *a;
+  WORD_LIST *l;
+
+  l = get_directory_stack (0);
+  a = array_from_word_list (l);
+  array_dispose (array_cell (self));
+  dispose_words (l);
+  var_setarray (self, a);
+  return self;
+}
+#endif /* PUSHD AND POPD && ARRAY_VARS */
+
+#if defined (ARRAY_VARS)
+/* We don't want to initialize the group set with a call to getgroups()
+   unless we're asked to, but we only want to do it once. */
+static SHELL_VAR *
+get_groupset (self)
+     SHELL_VAR *self;
+{
+  register int i;
+  int ng;
+  ARRAY *a;
+  static char **group_set = (char **)NULL;
+
+  if (group_set == 0)
+    {
+      group_set = get_group_list (&ng);
+      a = array_cell (self);
+      for (i = 0; i < ng; i++)
+	array_insert (a, i, group_set[i]);
+    }
+  return (self);
+}
+
+#  if defined (DEBUGGER)
+static SHELL_VAR *
+get_bashargcv (self)
+     SHELL_VAR *self;
+{
+  static int self_semaphore = 0;
+
+  /* Backwards compatibility: if we refer to BASH_ARGV or BASH_ARGC at the
+     top level without enabling debug mode, and we don't have an instance
+     of the variable set, initialize the arg arrays.
+     This will already have been done if debugging_mode != 0. */
+  if (self_semaphore == 0 && variable_context == 0 && debugging_mode == 0)	/* don't do it for shell functions */
+    {
+      self_semaphore = 1;
+      init_bash_argv ();
+      self_semaphore = 0;
+    }
+  return self;
+}
+#  endif
+
+static SHELL_VAR *
+build_hashcmd (self)
+     SHELL_VAR *self;
+{
+  HASH_TABLE *h;
+  int i;
+  char *k, *v;
+  BUCKET_CONTENTS *item;
+
+  h = assoc_cell (self);
+  if (h)
+    assoc_dispose (h);
+
+  if (hashed_filenames == 0 || HASH_ENTRIES (hashed_filenames) == 0)
+    {
+      var_setvalue (self, (char *)NULL);
+      return self;
+    }
+
+  h = assoc_create (hashed_filenames->nbuckets);
+  for (i = 0; i < hashed_filenames->nbuckets; i++)
+    {
+      for (item = hash_items (i, hashed_filenames); item; item = item->next)
+	{
+	  k = savestring (item->key);
+	  v = pathdata(item)->path;
+	  assoc_insert (h, k, v);
+	}
+    }
+
+  var_setvalue (self, (char *)h);
+  return self;
+}
+
+static SHELL_VAR *
+get_hashcmd (self)
+     SHELL_VAR *self;
+{
+  build_hashcmd (self);
+  return (self);
+}
+
+static SHELL_VAR *
+assign_hashcmd (self, value, ind, key)
+     SHELL_VAR *self;
+     char *value;
+     arrayind_t ind;
+     char *key;
+{
+#if defined (RESTRICTED_SHELL)
+  char *full_path;
+
+  if (restricted)
+    {
+      if (strchr (value, '/'))
+	{
+	  sh_restricted (value);
+	  return (SHELL_VAR *)NULL;
+	}
+      /* If we are changing the hash table in a restricted shell, make sure the
+	 target pathname can be found using a $PATH search. */
+      full_path = find_user_command (value);
+      if (full_path == 0 || *full_path == 0 || executable_file (full_path) == 0)
+	{
+	  sh_notfound (value);
+	  free (full_path);
+	  return ((SHELL_VAR *)NULL);
+	}
+      free (full_path);
+    }
+#endif
+  phash_insert (key, value, 0, 0);
+  return (build_hashcmd (self));
+}
+
+#if defined (ALIAS)
+static SHELL_VAR *
+build_aliasvar (self)
+     SHELL_VAR *self;
+{
+  HASH_TABLE *h;
+  int i;
+  char *k, *v;
+  BUCKET_CONTENTS *item;
+
+  h = assoc_cell (self);
+  if (h)
+    assoc_dispose (h);
+
+  if (aliases == 0 || HASH_ENTRIES (aliases) == 0)
+    {
+      var_setvalue (self, (char *)NULL);
+      return self;
+    }
+
+  h = assoc_create (aliases->nbuckets);
+  for (i = 0; i < aliases->nbuckets; i++)
+    {
+      for (item = hash_items (i, aliases); item; item = item->next)
+	{
+	  k = savestring (item->key);
+	  v = ((alias_t *)(item->data))->value;
+	  assoc_insert (h, k, v);
+	}
+    }
+
+  var_setvalue (self, (char *)h);
+  return self;
+}
+
+static SHELL_VAR *
+get_aliasvar (self)
+     SHELL_VAR *self;
+{
+  build_aliasvar (self);
+  return (self);
+}
+
+static SHELL_VAR *
+assign_aliasvar (self, value, ind, key)
+     SHELL_VAR *self;
+     char *value;
+     arrayind_t ind;
+     char *key;
+{
+  if (legal_alias_name (key, 0) == 0)
+    {
+       report_error (_("`%s': invalid alias name"), key);
+       return (self);
+    }
+  add_alias (key, value);
+  return (build_aliasvar (self));
+}
+#endif /* ALIAS */
+
+#endif /* ARRAY_VARS */
+
+/* If ARRAY_VARS is not defined, this just returns the name of any
+   currently-executing function.  If we have arrays, it's a call stack. */
+static SHELL_VAR *
+get_funcname (self)
+     SHELL_VAR *self;
+{
+#if ! defined (ARRAY_VARS)
+  char *t;
+  if (variable_context && this_shell_function)
+    {
+      FREE (value_cell (self));
+      t = savestring (this_shell_function->name);
+      var_setvalue (self, t);
+    }
+#endif
+  return (self);
+}
+
+void
+make_funcname_visible (on_or_off)
+     int on_or_off;
+{
+  SHELL_VAR *v;
+
+  v = find_variable ("FUNCNAME");
+  if (v == 0 || v->dynamic_value == 0)
+    return;
+
+  if (on_or_off)
+    VUNSETATTR (v, att_invisible);
+  else
+    VSETATTR (v, att_invisible);
+}
+
+static SHELL_VAR *
+init_funcname_var ()
+{
+  SHELL_VAR *v;
+
+  v = find_variable ("FUNCNAME");
+  if (v)
+    return v;
+#if defined (ARRAY_VARS)
+  INIT_DYNAMIC_ARRAY_VAR ("FUNCNAME", get_funcname, null_array_assign);
+#else
+  INIT_DYNAMIC_VAR ("FUNCNAME", (char *)NULL, get_funcname, null_assign);
+#endif
+  VSETATTR (v, att_invisible|att_noassign);
+  return v;
+}
+
+static void
+initialize_dynamic_variables ()
+{
+  SHELL_VAR *v;
+
+  v = init_seconds_var ();
+
+  INIT_DYNAMIC_VAR ("BASH_ARGV0", (char *)NULL, get_bash_argv0, assign_bash_argv0);
+
+  INIT_DYNAMIC_VAR ("BASH_COMMAND", (char *)NULL, get_bash_command, (sh_var_assign_func_t *)NULL);
+  INIT_DYNAMIC_VAR ("BASH_SUBSHELL", (char *)NULL, get_subshell, assign_subshell);
+
+  INIT_DYNAMIC_VAR ("RANDOM", (char *)NULL, get_random, assign_random);
+  VSETATTR (v, att_integer);
+  INIT_DYNAMIC_VAR ("SRANDOM", (char *)NULL, get_urandom, (sh_var_assign_func_t *)NULL);
+  VSETATTR (v, att_integer);  
+  INIT_DYNAMIC_VAR ("LINENO", (char *)NULL, get_lineno, assign_lineno);
+  VSETATTR (v, att_regenerate);
+
+  INIT_DYNAMIC_VAR ("BASHPID", (char *)NULL, get_bashpid, null_assign);
+  VSETATTR (v, att_integer);
+
+  INIT_DYNAMIC_VAR ("EPOCHSECONDS", (char *)NULL, get_epochseconds, null_assign);
+  VSETATTR (v, att_regenerate);
+  INIT_DYNAMIC_VAR ("EPOCHREALTIME", (char *)NULL, get_epochrealtime, null_assign);
+  VSETATTR (v, att_regenerate);
+
+#if defined (HISTORY)
+  INIT_DYNAMIC_VAR ("HISTCMD", (char *)NULL, get_histcmd, (sh_var_assign_func_t *)NULL);
+  VSETATTR (v, att_integer);
+#endif
+
+#if defined (READLINE)
+  INIT_DYNAMIC_VAR ("COMP_WORDBREAKS", (char *)NULL, get_comp_wordbreaks, assign_comp_wordbreaks);
+#endif
+
+#if defined (PUSHD_AND_POPD) && defined (ARRAY_VARS)
+  v = init_dynamic_array_var ("DIRSTACK", get_dirstack, assign_dirstack, 0);
+#endif /* PUSHD_AND_POPD && ARRAY_VARS */
+
+#if defined (ARRAY_VARS)
+  v = init_dynamic_array_var ("GROUPS", get_groupset, null_array_assign, att_noassign);
+
+#  if defined (DEBUGGER)
+  v = init_dynamic_array_var ("BASH_ARGC", get_bashargcv, null_array_assign, att_noassign|att_nounset);
+  v = init_dynamic_array_var ("BASH_ARGV", get_bashargcv, null_array_assign, att_noassign|att_nounset);
+#  endif /* DEBUGGER */
+  v = init_dynamic_array_var ("BASH_SOURCE", get_self, null_array_assign, att_noassign|att_nounset);
+  v = init_dynamic_array_var ("BASH_LINENO", get_self, null_array_assign, att_noassign|att_nounset);
+
+  v = init_dynamic_assoc_var ("BASH_CMDS", get_hashcmd, assign_hashcmd, att_nofree);
+#  if defined (ALIAS)
+  v = init_dynamic_assoc_var ("BASH_ALIASES", get_aliasvar, assign_aliasvar, att_nofree);
+#  endif
+#endif
+
+  v = init_funcname_var ();
+}
+
+/* **************************************************************** */
+/*								    */
+/*		Retrieving variables and values			    */
+/*								    */
+/* **************************************************************** */
+
+#if 0	/* not yet */
+int
+var_isset (var)
+     SHELL_VAR *var;
+{
+  return (var->value != 0);
+}
+
+int
+var_isunset (var)
+     SHELL_VAR *var;
+{
+  return (var->value == 0);
+}
+#endif
+
+/* How to get a pointer to the shell variable or function named NAME.
+   HASHED_VARS is a pointer to the hash table containing the list
+   of interest (either variables or functions). */
+
+static SHELL_VAR *
+hash_lookup (name, hashed_vars)
+     const char *name;
+     HASH_TABLE *hashed_vars;
+{
+  BUCKET_CONTENTS *bucket;
+
+  bucket = hash_search (name, hashed_vars, 0);
+  /* If we find the name in HASHED_VARS, set LAST_TABLE_SEARCHED to that
+     table. */
+  if (bucket)
+    last_table_searched = hashed_vars;
+  return (bucket ? (SHELL_VAR *)bucket->data : (SHELL_VAR *)NULL);
+}
+
+SHELL_VAR *
+var_lookup (name, vcontext)
+     const char *name;
+     VAR_CONTEXT *vcontext;
+{
+  VAR_CONTEXT *vc;
+  SHELL_VAR *v;
+
+  v = (SHELL_VAR *)NULL;
+  for (vc = vcontext; vc; vc = vc->down)
+    if (v = hash_lookup (name, vc->table))
+      break;
+
+  return v;
+}
+
+/* Look up the variable entry named NAME.  If SEARCH_TEMPENV is non-zero,
+   then also search the temporarily built list of exported variables.
+   The lookup order is:
+	temporary_env
+	shell_variables list
+*/
+
+SHELL_VAR *
+find_variable_internal (name, flags)
+     const char *name;
+     int flags;
+{
+  SHELL_VAR *var;
+  int search_tempenv, force_tempenv;
+  VAR_CONTEXT *vc;
+
+  var = (SHELL_VAR *)NULL;
+
+  force_tempenv = (flags & FV_FORCETEMPENV);
+
+  /* If explicitly requested, first look in the temporary environment for
+     the variable.  This allows constructs such as "foo=x eval 'echo $foo'"
+     to get the `exported' value of $foo.  This happens if we are executing
+     a function or builtin, or if we are looking up a variable in a
+     "subshell environment". */
+  search_tempenv = force_tempenv || (expanding_redir == 0 && subshell_environment);
+
+  if (search_tempenv && temporary_env)		
+    var = hash_lookup (name, temporary_env);
+
+  if (var == 0)
+    {
+      if ((flags & FV_SKIPINVISIBLE) == 0)
+	var = var_lookup (name, shell_variables);
+      else
+	{
+	  /* essentially var_lookup expanded inline so we can check for
+	     att_invisible */
+	  for (vc = shell_variables; vc; vc = vc->down)
+	    {
+	      var = hash_lookup (name, vc->table);
+	      if (var && invisible_p (var))
+		var = 0;
+	      if (var)
+		break;
+	    }
+	}
+    }
+
+  if (var == 0)
+    return ((SHELL_VAR *)NULL);
+
+  return (var->dynamic_value ? (*(var->dynamic_value)) (var) : var);
+}
+
+/* Look up and resolve the chain of nameref variables starting at V all the
+   way to NULL or non-nameref. */
+SHELL_VAR *
+find_variable_nameref (v)
+     SHELL_VAR *v;
+{
+  int level, flags;
+  char *newname;
+  SHELL_VAR *orig, *oldv;
+
+  level = 0;
+  orig = v;
+  while (v && nameref_p (v))
+    {
+      level++;
+      if (level > NAMEREF_MAX)
+	return ((SHELL_VAR *)0);	/* error message here? */
+      newname = nameref_cell (v);
+      if (newname == 0 || *newname == '\0')
+	return ((SHELL_VAR *)0);
+      oldv = v;
+      flags = 0;
+      if (expanding_redir == 0 && (assigning_in_environment || executing_builtin))
+	flags |= FV_FORCETEMPENV;
+      /* We don't handle array subscripts here. */
+      v = find_variable_internal (newname, flags);
+      if (v == orig || v == oldv)
+	{
+	  internal_warning (_("%s: circular name reference"), orig->name);
+#if 1
+	  /* XXX - provisional change - circular refs go to
+	     global scope for resolution, without namerefs. */
+	  if (variable_context && v->context)
+	    return (find_global_variable_noref (v->name));
+	  else
+#endif
+	  return ((SHELL_VAR *)0);
+	}
+    }
+  return v;
+}
+
+/* Resolve the chain of nameref variables for NAME.  XXX - could change later */
+SHELL_VAR *
+find_variable_last_nameref (name, vflags)
+     const char *name;
+     int vflags;
+{
+  SHELL_VAR *v, *nv;
+  char *newname;
+  int level, flags;
+
+  nv = v = find_variable_noref (name);
+  level = 0;
+  while (v && nameref_p (v))
+    {
+      level++;
+      if (level > NAMEREF_MAX)
+        return ((SHELL_VAR *)0);	/* error message here? */
+      newname = nameref_cell (v);
+      if (newname == 0 || *newname == '\0')
+	return ((vflags && invisible_p (v)) ? v : (SHELL_VAR *)0);
+      nv = v;
+      flags = 0;
+      if (expanding_redir == 0 && (assigning_in_environment || executing_builtin))
+	flags |= FV_FORCETEMPENV;
+      /* We don't accommodate array subscripts here. */
+      v = find_variable_internal (newname, flags);
+    }
+  return nv;
+}
+
+/* Resolve the chain of nameref variables for NAME.  XXX - could change later */
+SHELL_VAR *
+find_global_variable_last_nameref (name, vflags)
+     const char *name;
+     int vflags;
+{
+  SHELL_VAR *v, *nv;
+  char *newname;
+  int level;
+
+  nv = v = find_global_variable_noref (name);
+  level = 0;
+  while (v && nameref_p (v))
+    {
+      level++;
+      if (level > NAMEREF_MAX)
+        return ((SHELL_VAR *)0);	/* error message here? */
+      newname = nameref_cell (v);
+      if (newname == 0 || *newname == '\0')
+	return ((vflags && invisible_p (v)) ? v : (SHELL_VAR *)0);
+      nv = v;
+      /* We don't accommodate array subscripts here. */
+      v = find_global_variable_noref (newname);
+    }
+  return nv;
+}
+
+static SHELL_VAR *
+find_nameref_at_context (v, vc)
+     SHELL_VAR *v;
+     VAR_CONTEXT *vc;
+{
+  SHELL_VAR *nv, *nv2;
+  char *newname;
+  int level;
+
+  nv = v;
+  level = 1;
+  while (nv && nameref_p (nv))
+    {
+      level++;
+      if (level > NAMEREF_MAX)
+        return (&nameref_maxloop_value);
+      newname = nameref_cell (nv);
+      if (newname == 0 || *newname == '\0')
+        return ((SHELL_VAR *)NULL);      
+      nv2 = hash_lookup (newname, vc->table);
+      if (nv2 == 0)
+        break;
+      nv = nv2;
+    }
+  return nv;
+}
+
+/* Do nameref resolution from the VC, which is the local context for some
+   function or builtin, `up' the chain to the global variables context.  If
+   NVCP is not NULL, return the variable context where we finally ended the
+   nameref resolution (so the bind_variable_internal can use the correct
+   variable context and hash table). */
+static SHELL_VAR *
+find_variable_nameref_context (v, vc, nvcp)
+     SHELL_VAR *v;
+     VAR_CONTEXT *vc;
+     VAR_CONTEXT **nvcp;
+{
+  SHELL_VAR *nv, *nv2;
+  VAR_CONTEXT *nvc;
+
+  /* Look starting at the current context all the way `up' */
+  for (nv = v, nvc = vc; nvc; nvc = nvc->down)
+    {
+      nv2 = find_nameref_at_context (nv, nvc);
+      if (nv2 == &nameref_maxloop_value)
+	return (nv2);			/* XXX */
+      if (nv2 == 0)
+        continue;
+      nv = nv2;
+      if (*nvcp)
+        *nvcp = nvc;
+      if (nameref_p (nv) == 0)
+        break;
+    }
+  return (nameref_p (nv) ? (SHELL_VAR *)NULL : nv);
+}
+
+/* Do nameref resolution from the VC, which is the local context for some
+   function or builtin, `up' the chain to the global variables context.  If
+   NVCP is not NULL, return the variable context where we finally ended the
+   nameref resolution (so the bind_variable_internal can use the correct
+   variable context and hash table). */
+static SHELL_VAR *
+find_variable_last_nameref_context (v, vc, nvcp)
+     SHELL_VAR *v;
+     VAR_CONTEXT *vc;
+     VAR_CONTEXT **nvcp;
+{
+  SHELL_VAR *nv, *nv2;
+  VAR_CONTEXT *nvc;
+
+  /* Look starting at the current context all the way `up' */
+  for (nv = v, nvc = vc; nvc; nvc = nvc->down)
+    {
+      nv2 = find_nameref_at_context (nv, nvc);
+      if (nv2 == &nameref_maxloop_value)
+	return (nv2);			/* XXX */
+      if (nv2 == 0)
+	continue;
+      nv = nv2;
+      if (*nvcp)
+        *nvcp = nvc;
+    }
+  return (nameref_p (nv) ? nv : (SHELL_VAR *)NULL);
+}
+
+SHELL_VAR *
+find_variable_nameref_for_create (name, flags)
+     const char *name;
+     int flags;
+{
+  SHELL_VAR *var;
+
+  /* See if we have a nameref pointing to a variable that hasn't been
+     created yet. */
+  var = find_variable_last_nameref (name, 1);
+  if ((flags&1) && var && nameref_p (var) && invisible_p (var))
+    {
+      internal_warning (_("%s: removing nameref attribute"), name);
+      VUNSETATTR (var, att_nameref);
+    }
+  if (var && nameref_p (var))
+    {
+      if (legal_identifier (nameref_cell (var)) == 0)
+	{
+	  sh_invalidid (nameref_cell (var) ? nameref_cell (var) : "");
+	  return ((SHELL_VAR *)INVALID_NAMEREF_VALUE);
+	}
+    }
+  return (var);
+}
+
+SHELL_VAR *
+find_variable_nameref_for_assignment (name, flags)
+     const char *name;
+     int flags;
+{
+  SHELL_VAR *var;
+
+  /* See if we have a nameref pointing to a variable that hasn't been
+     created yet. */
+  var = find_variable_last_nameref (name, 1);
+  if (var && nameref_p (var) && invisible_p (var))	/* XXX - flags */
+    {
+      internal_warning (_("%s: removing nameref attribute"), name);
+      VUNSETATTR (var, att_nameref);
+    }
+  if (var && nameref_p (var))
+    {
+      if (valid_nameref_value (nameref_cell (var), 1) == 0)
+	{
+	  sh_invalidid (nameref_cell (var) ? nameref_cell (var) : "");
+	  return ((SHELL_VAR *)INVALID_NAMEREF_VALUE);
+	}
+    }
+  return (var);
+}
+
+/* If find_variable (name) returns NULL, check that it's not a nameref
+   referencing a variable that doesn't exist. If it is, return the new
+   name. If not, return the original name. Kind of like the previous
+   function, but dealing strictly with names. This takes assignment flags
+   so it can deal with the various assignment modes used by `declare'. */
+char *
+nameref_transform_name (name, flags)
+     char *name;
+     int flags;
+{
+  SHELL_VAR *v;
+  char *newname;
+
+  v = 0;
+  if (flags & ASS_MKLOCAL)
+    {
+      v = find_variable_last_nameref (name, 1);
+      /* If we're making local variables, only follow namerefs that point to
+	 non-existent variables at the same variable context. */
+      if (v && v->context != variable_context)
+	v = 0;
+    }
+  else if (flags & ASS_MKGLOBAL)
+    v = (flags & ASS_CHKLOCAL) ? find_variable_last_nameref (name, 1)
+			       : find_global_variable_last_nameref (name, 1);
+  if (v && nameref_p (v) && valid_nameref_value (nameref_cell (v), 1))
+    return nameref_cell (v);
+  return name;
+}
+
+/* Find a variable, forcing a search of the temporary environment first */
+SHELL_VAR *
+find_variable_tempenv (name)
+     const char *name;
+{
+  SHELL_VAR *var;
+
+  var = find_variable_internal (name, FV_FORCETEMPENV);
+  if (var && nameref_p (var))
+    var = find_variable_nameref (var);
+  return (var);
+}
+
+/* Find a variable, not forcing a search of the temporary environment first */
+SHELL_VAR *
+find_variable_notempenv (name)
+     const char *name;
+{
+  SHELL_VAR *var;
+
+  var = find_variable_internal (name, 0);
+  if (var && nameref_p (var))
+    var = find_variable_nameref (var);
+  return (var);
+}
+
+SHELL_VAR *
+find_global_variable (name)
+     const char *name;
+{
+  SHELL_VAR *var;
+
+  var = var_lookup (name, global_variables);
+  if (var && nameref_p (var))
+    var = find_variable_nameref (var);
+
+  if (var == 0)
+    return ((SHELL_VAR *)NULL);
+
+  return (var->dynamic_value ? (*(var->dynamic_value)) (var) : var);
+}
+
+SHELL_VAR *
+find_global_variable_noref (name)
+     const char *name;
+{
+  SHELL_VAR *var;
+
+  var = var_lookup (name, global_variables);
+
+  if (var == 0)
+    return ((SHELL_VAR *)NULL);
+
+  return (var->dynamic_value ? (*(var->dynamic_value)) (var) : var);
+}
+
+SHELL_VAR *
+find_shell_variable (name)
+     const char *name;
+{
+  SHELL_VAR *var;
+
+  var = var_lookup (name, shell_variables);
+  if (var && nameref_p (var))
+    var = find_variable_nameref (var);
+
+  if (var == 0)
+    return ((SHELL_VAR *)NULL);
+
+  return (var->dynamic_value ? (*(var->dynamic_value)) (var) : var);
+}
+
+/* Look up the variable entry named NAME.  Returns the entry or NULL. */
+SHELL_VAR *
+find_variable (name)
+     const char *name;
+{
+  SHELL_VAR *v;
+  int flags;
+
+  last_table_searched = 0;
+  flags = 0;
+  if (expanding_redir == 0 && (assigning_in_environment || executing_builtin))
+    flags |= FV_FORCETEMPENV;
+  v = find_variable_internal (name, flags);
+  if (v && nameref_p (v))
+    v = find_variable_nameref (v);
+  return v;
+}
+
+/* Find the first instance of NAME in the variable context chain; return first
+   one found without att_invisible set; return 0 if no non-invisible instances
+   found. */
+SHELL_VAR *
+find_variable_no_invisible (name)
+     const char *name;
+{
+  SHELL_VAR *v;
+  int flags;
+
+  last_table_searched = 0;
+  flags = FV_SKIPINVISIBLE;
+  if (expanding_redir == 0 && (assigning_in_environment || executing_builtin))
+    flags |= FV_FORCETEMPENV;
+  v = find_variable_internal (name, flags);
+  if (v && nameref_p (v))
+    v = find_variable_nameref (v);
+  return v;
+}
+
+/* Find the first instance of NAME in the variable context chain; return first
+   one found even if att_invisible set. */
+SHELL_VAR *
+find_variable_for_assignment (name)
+     const char *name;
+{
+  SHELL_VAR *v;
+  int flags;
+
+  last_table_searched = 0;
+  flags = 0;
+  if (expanding_redir == 0 && (assigning_in_environment || executing_builtin))
+    flags |= FV_FORCETEMPENV;
+  v = find_variable_internal (name, flags);
+  if (v && nameref_p (v))
+    v = find_variable_nameref (v);
+  return v;
+}
+
+SHELL_VAR *
+find_variable_noref (name)
+     const char *name;
+{
+  SHELL_VAR *v;
+  int flags;
+
+  flags = 0;
+  if (expanding_redir == 0 && (assigning_in_environment || executing_builtin))
+    flags |= FV_FORCETEMPENV;
+  v = find_variable_internal (name, flags);
+  return v;
+}
+
+/* Look up the function entry whose name matches STRING.
+   Returns the entry or NULL. */
+SHELL_VAR *
+find_function (name)
+     const char *name;
+{
+  return (hash_lookup (name, shell_functions));
+}
+
+/* Find the function definition for the shell function named NAME.  Returns
+   the entry or NULL. */
+FUNCTION_DEF *
+find_function_def (name)
+     const char *name;
+{
+#if defined (DEBUGGER)
+  return ((FUNCTION_DEF *)hash_lookup (name, shell_function_defs));
+#else
+  return ((FUNCTION_DEF *)0);
+#endif
+}
+
+/* Return the value of VAR.  VAR is assumed to have been the result of a
+   lookup without any subscript, if arrays are compiled into the shell. */
+char *
+get_variable_value (var)
+     SHELL_VAR *var;
+{
+  if (var == 0)
+    return ((char *)NULL);
+#if defined (ARRAY_VARS)
+  else if (array_p (var))
+    return (array_reference (array_cell (var), 0));
+  else if (assoc_p (var))
+    return (assoc_reference (assoc_cell (var), "0"));
+#endif
+  else
+    return (value_cell (var));
+}
+
+/* Return the string value of a variable.  Return NULL if the variable
+   doesn't exist.  Don't cons a new string.  This is a potential memory
+   leak if the variable is found in the temporary environment, but doesn't
+   leak in practice.  Since    functions and variables have separate name
+   spaces, returns NULL if var_name is a shell function only. */
+char *
+get_string_value (var_name)
+     const char *var_name;
+{
+  SHELL_VAR *var;
+
+  var = find_variable (var_name);
+  return ((var) ? get_variable_value (var) : (char *)NULL);
+}
+
+/* This is present for use by the tilde and readline libraries. */
+char *
+sh_get_env_value (v)
+     const char *v;
+{
+  return get_string_value (v);
+}
+
+/* **************************************************************** */
+/*								    */
+/*		  Creating and setting variables		    */
+/*								    */
+/* **************************************************************** */
+
+static int
+var_sametype (v1, v2)
+     SHELL_VAR *v1;
+     SHELL_VAR *v2;
+{
+  if (v1 == 0 || v2 == 0)
+    return 0;
+#if defined (ARRAY_VARS)
+  else if (assoc_p (v1) && assoc_p (v2))
+    return 1;
+  else if (array_p (v1) && array_p (v2))
+    return 1;
+  else if (array_p (v1) || array_p (v2))
+    return 0;
+  else if (assoc_p (v1) || assoc_p (v2))
+    return 0;
+#endif
+  else
+    return 1;
+}
+
+int
+validate_inherited_value (var, type)
+     SHELL_VAR *var;
+     int type;
+{
+#if defined (ARRAY_VARS)
+  if (type == att_array && assoc_p (var))
+    return 0;
+  else if (type == att_assoc && array_p (var))
+    return 0;
+  else
+#endif
+  return 1;	/* should we run convert_var_to_array here or let the caller? */
+}
+
+/* Set NAME to VALUE if NAME has no value. */
+SHELL_VAR *
+set_if_not (name, value)
+     char *name, *value;
+{
+  SHELL_VAR *v;
+
+  if (shell_variables == 0)
+    create_variable_tables ();
+
+  v = find_variable (name);
+  if (v == 0)
+    v = bind_variable_internal (name, value, global_variables->table, HASH_NOSRCH, 0);
+  return (v);
+}
+
+/* Create a local variable referenced by NAME. */
+SHELL_VAR *
+make_local_variable (name, flags)
+     const char *name;
+     int flags;
+{
+  SHELL_VAR *new_var, *old_var, *old_ref;
+  VAR_CONTEXT *vc;
+  int was_tmpvar;
+  char *old_value;
+
+  /* We don't want to follow the nameref chain when making local variables; we
+     just want to create them. */
+  old_ref = find_variable_noref (name);
+  if (old_ref && nameref_p (old_ref) == 0)
+    old_ref = 0;
+  /* local foo; local foo;  is a no-op. */
+  old_var = find_variable (name);
+  if (old_ref == 0 && old_var && local_p (old_var) && old_var->context == variable_context)
+    return (old_var);
+
+  /* local -n foo; local -n foo;  is a no-op. */
+  if (old_ref && local_p (old_ref) && old_ref->context == variable_context)
+    return (old_ref);
+
+  /* From here on, we want to use the refvar, not the variable it references */
+  if (old_ref)
+    old_var = old_ref;
+
+  was_tmpvar = old_var && tempvar_p (old_var);
+  /* If we're making a local variable in a shell function, the temporary env
+     has already been merged into the function's variable context stack.  We
+     can assume that a temporary var in the same context appears in the same
+     VAR_CONTEXT and can safely be returned without creating a new variable
+     (which results in duplicate names in the same VAR_CONTEXT->table */
+  /* We can't just test tmpvar_p because variables in the temporary env given
+     to a shell function appear in the function's local variable VAR_CONTEXT
+     but retain their tempvar attribute.  We want temporary variables that are
+     found in temporary_env, hence the test for last_table_searched, which is
+     set in hash_lookup and only (so far) checked here. */
+  if (was_tmpvar && old_var->context == variable_context && last_table_searched != temporary_env)
+    {
+      VUNSETATTR (old_var, att_invisible);	/* XXX */
+      /* We still want to flag this variable as local, though, and set things
+         up so that it gets treated as a local variable. */
+      new_var = old_var;
+      /* Since we found the variable in a temporary environment, this will
+	 succeed. */
+      for (vc = shell_variables; vc; vc = vc->down)
+	if (vc_isfuncenv (vc) && vc->scope == variable_context)
+	  break;
+      goto set_local_var_flags;
+
+      return (old_var);
+    }
+
+  /* If we want to change to "inherit the old variable's value" semantics,
+     here is where to save the old value. */
+  old_value = was_tmpvar ? value_cell (old_var) : (char *)NULL;
+
+  for (vc = shell_variables; vc; vc = vc->down)
+    if (vc_isfuncenv (vc) && vc->scope == variable_context)
+      break;
+
+  if (vc == 0)
+    {
+      internal_error (_("make_local_variable: no function context at current scope"));
+      return ((SHELL_VAR *)NULL);
+    }
+  else if (vc->table == 0)
+    vc->table = hash_create (TEMPENV_HASH_BUCKETS);
+
+  /* Since this is called only from the local/declare/typeset code, we can
+     call builtin_error here without worry (of course, it will also work
+     for anything that sets this_command_name).  Variables with the `noassign'
+     attribute may not be made local.  The test against old_var's context
+     level is to disallow local copies of readonly global variables (since I
+     believe that this could be a security hole).  Readonly copies of calling
+     function local variables are OK. */
+  if (old_var && (noassign_p (old_var) ||
+		 (readonly_p (old_var) && old_var->context == 0)))
+    {
+      if (readonly_p (old_var))
+	sh_readonly (name);
+      else if (noassign_p (old_var))
+	builtin_error (_("%s: variable may not be assigned value"), name);
+#if 0
+      /* Let noassign variables through with a warning */
+      if (readonly_p (old_var))
+#endif
+	return ((SHELL_VAR *)NULL);
+    }
+
+  if (old_var == 0)
+    new_var = make_new_variable (name, vc->table);
+  else
+    {
+      new_var = make_new_variable (name, vc->table);
+
+      /* If we found this variable in one of the temporary environments,
+	 inherit its value.  Watch to see if this causes problems with
+	 things like `x=4 local x'. XXX - see above for temporary env
+	 variables with the same context level as variable_context */
+      /* XXX - we should only do this if the variable is not an array. */
+      /* If we want to change the local variable semantics to "inherit
+	 the old variable's value" here is where to set it.  And we would
+	 need to use copy_variable (currently unused) to do it for all
+	 possible variable values. */
+      if (was_tmpvar)
+	var_setvalue (new_var, savestring (old_value));
+      else if (localvar_inherit || (flags & MKLOC_INHERIT))
+	{
+	  /* This may not make sense for nameref variables that are shadowing
+	     variables with the same name, but we don't know that yet. */
+#if defined (ARRAY_VARS)
+	  if (assoc_p (old_var))
+	    var_setassoc (new_var, assoc_copy (assoc_cell (old_var)));
+	  else if (array_p (old_var))
+	    var_setarray (new_var, array_copy (array_cell (old_var)));
+	  else if (value_cell (old_var))
+#else
+	  if (value_cell (old_var))
+#endif
+	    var_setvalue (new_var, savestring (value_cell (old_var)));
+	  else
+	    var_setvalue (new_var, (char *)NULL);
+	}
+
+      if (localvar_inherit || (flags & MKLOC_INHERIT))
+	{
+	  /* It doesn't make sense to inherit the nameref attribute */
+	  new_var->attributes = old_var->attributes & ~att_nameref;
+	  new_var->dynamic_value = old_var->dynamic_value;
+	  new_var->assign_func = old_var->assign_func;
+	}
+      else
+	/* We inherit the export attribute, but no others. */
+	new_var->attributes = exported_p (old_var) ? att_exported : 0;
+    }
+
+set_local_var_flags:
+  vc->flags |= VC_HASLOCAL;
+
+  new_var->context = variable_context;
+  VSETATTR (new_var, att_local);
+
+  if (ifsname (name))
+    setifs (new_var);
+
+  /* value_cell will be 0 if localvar_inherit == 0 or there was no old variable
+     with the same name or the old variable was invisible */
+  if (was_tmpvar == 0 && value_cell (new_var) == 0)
+    VSETATTR (new_var, att_invisible);	/* XXX */
+  return (new_var);
+}
+
+/* Create a new shell variable with name NAME. */
+static SHELL_VAR *
+new_shell_variable (name)
+     const char *name;
+{
+  SHELL_VAR *entry;
+
+  entry = (SHELL_VAR *)xmalloc (sizeof (SHELL_VAR));
+
+  entry->name = savestring (name);
+  var_setvalue (entry, (char *)NULL);
+  CLEAR_EXPORTSTR (entry);
+
+  entry->dynamic_value = (sh_var_value_func_t *)NULL;
+  entry->assign_func = (sh_var_assign_func_t *)NULL;
+
+  entry->attributes = 0;
+
+  /* Always assume variables are to be made at toplevel!
+     make_local_variable has the responsibility of changing the
+     variable context. */
+  entry->context = 0;
+
+  return (entry);
+}
+
+/* Create a new shell variable with name NAME and add it to the hash table
+   TABLE. */
+static SHELL_VAR *
+make_new_variable (name, table)
+     const char *name;
+     HASH_TABLE *table;
+{
+  SHELL_VAR *entry;
+  BUCKET_CONTENTS *elt;
+
+  entry = new_shell_variable (name);
+
+  /* Make sure we have a shell_variables hash table to add to. */
+  if (shell_variables == 0)
+    create_variable_tables ();
+
+  elt = hash_insert (savestring (name), table, HASH_NOSRCH);
+  elt->data = (PTR_T)entry;
+
+  return entry;
+}
+
+#if defined (ARRAY_VARS)
+SHELL_VAR *
+make_new_array_variable (name)
+     char *name;
+{
+  SHELL_VAR *entry;
+  ARRAY *array;
+
+  entry = make_new_variable (name, global_variables->table);
+  array = array_create ();
+
+  var_setarray (entry, array);
+  VSETATTR (entry, att_array);
+  return entry;
+}
+
+SHELL_VAR *
+make_local_array_variable (name, flags)
+     char *name;
+     int flags;
+{
+  SHELL_VAR *var;
+  ARRAY *array;
+  int assoc_ok;
+
+  assoc_ok = flags & MKLOC_ASSOCOK;
+
+  var = make_local_variable (name, flags & MKLOC_INHERIT);	/* XXX for now */
+  /* If ASSOC_OK is non-zero, assume that we are ok with letting an assoc
+     variable return to the caller without converting it. The caller will
+     either flag an error or do the conversion itself. */
+  if (var == 0 || array_p (var) || (assoc_ok && assoc_p (var)))
+    return var;
+
+  /* Validate any value we inherited from a variable instance at a previous
+     scope and discard anything that's invalid. */
+  if (localvar_inherit && assoc_p (var))
+    {
+      internal_warning ("%s: cannot inherit value from incompatible type", name);
+      VUNSETATTR (var, att_assoc);
+      dispose_variable_value (var);
+      array = array_create ();
+      var_setarray (var, array);
+    }
+  else if (localvar_inherit)
+    var = convert_var_to_array (var);		/* XXX */
+  else
+    {
+      dispose_variable_value (var);
+      array = array_create ();
+      var_setarray (var, array);
+    }
+
+  VSETATTR (var, att_array);
+  return var;
+}
+
+SHELL_VAR *
+make_new_assoc_variable (name)
+     char *name;
+{
+  SHELL_VAR *entry;
+  HASH_TABLE *hash;
+
+  entry = make_new_variable (name, global_variables->table);
+  hash = assoc_create (ASSOC_HASH_BUCKETS);
+
+  var_setassoc (entry, hash);
+  VSETATTR (entry, att_assoc);
+  return entry;
+}
+
+SHELL_VAR *
+make_local_assoc_variable (name, flags)
+     char *name;
+     int flags;
+{
+  SHELL_VAR *var;
+  HASH_TABLE *hash;
+  int array_ok;
+
+  array_ok = flags & MKLOC_ARRAYOK;
+
+  var = make_local_variable (name, flags & MKLOC_INHERIT);	/* XXX for now */
+  /* If ARRAY_OK is non-zero, assume that we are ok with letting an array
+     variable return to the caller without converting it. The caller will
+     either flag an error or do the conversion itself. */
+  if (var == 0 || assoc_p (var) || (array_ok && array_p (var)))
+    return var;
+
+  /* Validate any value we inherited from a variable instance at a previous
+     scope and discard anything that's invalid. */
+  if (localvar_inherit && array_p (var))
+    {
+      internal_warning ("%s: cannot inherit value from incompatible type", name);
+      VUNSETATTR (var, att_array);
+      dispose_variable_value (var);
+      hash = assoc_create (ASSOC_HASH_BUCKETS);
+      var_setassoc (var, hash);
+    }
+  else if (localvar_inherit)
+    var = convert_var_to_assoc (var);		/* XXX */
+  else
+    {
+      dispose_variable_value (var);
+      hash = assoc_create (ASSOC_HASH_BUCKETS);
+      var_setassoc (var, hash);
+    }
+
+  VSETATTR (var, att_assoc);
+  return var;
+}
+#endif
+
+char *
+make_variable_value (var, value, flags)
+     SHELL_VAR *var;
+     char *value;
+     int flags;
+{
+  char *retval, *oval;
+  intmax_t lval, rval;
+  int expok, olen, op;
+
+  /* If this variable has had its type set to integer (via `declare -i'),
+     then do expression evaluation on it and store the result.  The
+     functions in expr.c (evalexp()) and bind_int_variable() are responsible
+     for turning off the integer flag if they don't want further
+     evaluation done.  Callers that find it inconvenient to do this can set
+     the ASS_NOEVAL flag.  For the special case of arithmetic expression
+     evaluation, the caller can set ASS_NOLONGJMP to avoid jumping out to
+     top_level. */
+  if ((flags & ASS_NOEVAL) == 0 && integer_p (var))
+    {
+      if (flags & ASS_APPEND)
+	{
+	  oval = value_cell (var);
+	  lval = evalexp (oval, 0, &expok);	/* ksh93 seems to do this */
+	  if (expok == 0)
+	    {
+	      if (flags & ASS_NOLONGJMP)
+		goto make_value;
+	      else
+		{
+		  top_level_cleanup ();
+		  jump_to_top_level (DISCARD);
+		}
+	    }
+	}
+      rval = evalexp (value, 0, &expok);
+      if (expok == 0)
+	{
+	  if (flags & ASS_NOLONGJMP)
+	    goto make_value;
+	  else
+	    {
+	      top_level_cleanup ();
+	      jump_to_top_level (DISCARD);
+	    }
+	}
+      /* This can be fooled if the variable's value changes while evaluating
+	 `rval'.  We can change it if we move the evaluation of lval to here. */
+      if (flags & ASS_APPEND)
+	rval += lval;
+      retval = itos (rval);
+    }
+#if defined (CASEMOD_ATTRS)
+  else if ((flags & ASS_NOEVAL) == 0 && (capcase_p (var) || uppercase_p (var) || lowercase_p (var)))
+    {
+      if (flags & ASS_APPEND)
+	{
+	  oval = get_variable_value (var);
+	  if (oval == 0)	/* paranoia */
+	    oval = "";
+	  olen = STRLEN (oval);
+	  retval = (char *)xmalloc (olen + (value ? STRLEN (value) : 0) + 1);
+	  strcpy (retval, oval);
+	  if (value)
+	    strcpy (retval+olen, value);
+	}
+      else if (*value)
+	retval = savestring (value);
+      else
+	{
+	  retval = (char *)xmalloc (1);
+	  retval[0] = '\0';
+	}
+      op = capcase_p (var) ? CASE_CAPITALIZE
+			 : (uppercase_p (var) ? CASE_UPPER : CASE_LOWER);
+      oval = sh_modcase (retval, (char *)0, op);
+      free (retval);
+      retval = oval;
+    }
+#endif /* CASEMOD_ATTRS */
+  else if (value)
+    {
+make_value:
+      if (flags & ASS_APPEND)
+	{
+	  oval = get_variable_value (var);
+	  if (oval == 0)	/* paranoia */
+	    oval = "";
+	  olen = STRLEN (oval);
+	  retval = (char *)xmalloc (olen + (value ? STRLEN (value) : 0) + 1);
+	  strcpy (retval, oval);
+	  if (value)
+	    strcpy (retval+olen, value);
+	}
+      else if (*value)
+	retval = savestring (value);
+      else
+	{
+	  retval = (char *)xmalloc (1);
+	  retval[0] = '\0';
+	}
+    }
+  else
+    retval = (char *)NULL;
+
+  return retval;
+}
+
+/* If we can optimize appending to string variables, say so */
+static int
+can_optimize_assignment (entry, value, aflags)
+     SHELL_VAR *entry;
+     char *value;
+     int aflags;
+{
+  if ((aflags & ASS_APPEND) == 0)
+    return 0;
+#if defined (ARRAY_VARS)
+  if (array_p (entry) || assoc_p (entry))
+    return 0;
+#endif
+  if (integer_p (entry) || uppercase_p (entry) || lowercase_p (entry) || capcase_p (entry))
+    return 0;
+  if (readonly_p (entry) || noassign_p (entry))
+    return 0;
+  return 1;
+}
+
+/* right now we optimize appends to string variables */
+static SHELL_VAR *
+optimized_assignment (entry, value, aflags)
+     SHELL_VAR *entry;
+     char *value;
+     int aflags;
+{
+  size_t len, vlen;
+  char *v, *new;
+
+  v = value_cell (entry);
+  len = STRLEN (v);
+  vlen = STRLEN (value);
+
+  new = (char *)xrealloc (v, len + vlen + 8);	/* for now */
+  if (vlen == 1)
+    {
+      new[len] = *value;
+      new[len+1] = '\0';
+    }
+  else
+    strcpy (new + len, value);
+  var_setvalue (entry, new);
+  return entry;
+}
+
+/* Bind a variable NAME to VALUE in the HASH_TABLE TABLE, which may be the
+   temporary environment (but usually is not).  HFLAGS controls how NAME
+   is looked up in TABLE; AFLAGS controls how VALUE is assigned */
+static SHELL_VAR *
+bind_variable_internal (name, value, table, hflags, aflags)
+     const char *name;
+     char *value;
+     HASH_TABLE *table;
+     int hflags, aflags;
+{
+  char *newval, *tname;
+  SHELL_VAR *entry, *tentry;
+
+  entry = (hflags & HASH_NOSRCH) ? (SHELL_VAR *)NULL : hash_lookup (name, table);
+  /* Follow the nameref chain here if this is the global variables table */
+  if (entry && nameref_p (entry) && (invisible_p (entry) == 0) && table == global_variables->table)
+    {
+      entry = find_global_variable (entry->name);
+      /* Let's see if we have a nameref referencing a variable that hasn't yet
+	 been created. */
+      if (entry == 0)
+	entry = find_variable_last_nameref (name, 0);	/* XXX */
+      if (entry == 0)					/* just in case */
+        return (entry);
+    }
+
+  /* The first clause handles `declare -n ref; ref=x;' or `declare -n ref;
+     declare -n ref' */
+  if (entry && invisible_p (entry) && nameref_p (entry))
+    {
+      if ((aflags & ASS_FORCE) == 0 && value && valid_nameref_value (value, 0) == 0)
+	{
+	  sh_invalidid (value);
+	  return ((SHELL_VAR *)NULL);
+	}
+      goto assign_value;
+    }
+  else if (entry && nameref_p (entry))
+    {
+      newval = nameref_cell (entry);	/* XXX - newval can't be NULL here */
+      if (valid_nameref_value (newval, 0) == 0)
+	{
+	  sh_invalidid (newval);
+	  return ((SHELL_VAR *)NULL);
+	}
+#if defined (ARRAY_VARS)
+      /* declare -n foo=x[2] ; foo=bar */
+      if (valid_array_reference (newval, 0))
+	{
+	  tname = array_variable_name (newval, 0, (char **)0, (int *)0);
+	  if (tname && (tentry = find_variable_noref (tname)) && nameref_p (tentry))
+	    {
+	      /* nameref variables can't be arrays */
+	      internal_warning (_("%s: removing nameref attribute"), name_cell (tentry));
+	      FREE (value_cell (tentry));		/* XXX - bash-4.3 compat */
+	      var_setvalue (tentry, (char *)NULL);
+	      VUNSETATTR (tentry, att_nameref);
+	    }
+	  free (tname);
+          /* XXX - should it be aflags? */
+	  entry = assign_array_element (newval, make_variable_value (entry, value, aflags), aflags|ASS_NAMEREF);
+	  if (entry == 0)
+	    return entry;
+	}
+      else
+#endif
+	{
+	  entry = make_new_variable (newval, table);
+	  var_setvalue (entry, make_variable_value (entry, value, aflags));
+	}
+    }
+  else if (entry == 0)
+    {
+      entry = make_new_variable (name, table);
+      var_setvalue (entry, make_variable_value (entry, value, aflags)); /* XXX */
+    }
+  else if (entry->assign_func)	/* array vars have assign functions now */
+    {
+      if ((readonly_p (entry) && (aflags & ASS_FORCE) == 0) || noassign_p (entry))
+	{
+	  if (readonly_p (entry))
+	    err_readonly (name_cell (entry));
+	  return (entry);
+	}
+
+      INVALIDATE_EXPORTSTR (entry);
+      newval = (aflags & ASS_APPEND) ? make_variable_value (entry, value, aflags) : value;
+      if (assoc_p (entry))
+	entry = (*(entry->assign_func)) (entry, newval, -1, savestring ("0"));
+      else if (array_p (entry))
+	entry = (*(entry->assign_func)) (entry, newval, 0, 0);
+      else
+	entry = (*(entry->assign_func)) (entry, newval, -1, 0);
+      if (newval != value)
+	free (newval);
+      return (entry);
+    }
+  else
+    {
+assign_value:
+      if ((readonly_p (entry) && (aflags & ASS_FORCE) == 0) || noassign_p (entry))
+	{
+	  if (readonly_p (entry))
+	    err_readonly (name_cell (entry));
+	  return (entry);
+	}
+
+      /* Variables which are bound are visible. */
+      VUNSETATTR (entry, att_invisible);
+
+      /* If we can optimize the assignment, do so and return.  Right now, we
+	 optimize appends to string variables. */
+      if (can_optimize_assignment (entry, value, aflags))
+	{
+	  INVALIDATE_EXPORTSTR (entry);
+	  optimized_assignment (entry, value, aflags);
+
+	  if (mark_modified_vars)
+	    VSETATTR (entry, att_exported);
+
+	  if (exported_p (entry))
+	    array_needs_making = 1;
+
+	  return (entry);
+	}
+
+#if defined (ARRAY_VARS)
+      if (assoc_p (entry) || array_p (entry))
+        newval = make_array_variable_value (entry, 0, "0", value, aflags);
+      else
+#endif
+      newval = make_variable_value (entry, value, aflags);	/* XXX */
+
+      /* Invalidate any cached export string */
+      INVALIDATE_EXPORTSTR (entry);
+
+#if defined (ARRAY_VARS)
+      /* XXX -- this bears looking at again -- XXX */
+      /* If an existing array variable x is being assigned to with x=b or
+	 `read x' or something of that nature, silently convert it to
+	 x[0]=b or `read x[0]'. */
+      if (assoc_p (entry))
+	{
+	  assoc_insert (assoc_cell (entry), savestring ("0"), newval);
+	  free (newval);
+	}
+      else if (array_p (entry))
+	{
+	  array_insert (array_cell (entry), 0, newval);
+	  free (newval);
+	}
+      else
+#endif
+	{
+	  FREE (value_cell (entry));
+	  var_setvalue (entry, newval);
+	}
+    }
+
+  if (mark_modified_vars)
+    VSETATTR (entry, att_exported);
+
+  if (exported_p (entry))
+    array_needs_making = 1;
+
+  return (entry);
+}
+	
+/* Bind a variable NAME to VALUE.  This conses up the name
+   and value strings.  If we have a temporary environment, we bind there
+   first, then we bind into shell_variables. */
+
+SHELL_VAR *
+bind_variable (name, value, flags)
+     const char *name;
+     char *value;
+     int flags;
+{
+  SHELL_VAR *v, *nv;
+  VAR_CONTEXT *vc, *nvc;
+
+  if (shell_variables == 0)
+    create_variable_tables ();
+
+  /* If we have a temporary environment, look there first for the variable,
+     and, if found, modify the value there before modifying it in the
+     shell_variables table.  This allows sourced scripts to modify values
+     given to them in a temporary environment while modifying the variable
+     value that the caller sees. */
+  if (temporary_env && value)		/* XXX - can value be null here? */
+    bind_tempenv_variable (name, value);
+
+  /* XXX -- handle local variables here. */
+  for (vc = shell_variables; vc; vc = vc->down)
+    {
+      if (vc_isfuncenv (vc) || vc_isbltnenv (vc))
+	{
+	  v = hash_lookup (name, vc->table);
+	  nvc = vc;
+	  if (v && nameref_p (v))
+	    {
+	      /* This starts at the context where we found the nameref. If we
+		 want to start the name resolution over again at the original
+		 context, this is where we need to change it */
+	      nv = find_variable_nameref_context (v, vc, &nvc);
+	      if (nv == 0)
+		{
+		  nv = find_variable_last_nameref_context (v, vc, &nvc);
+		  if (nv && nameref_p (nv))
+		    {
+		      /* If this nameref variable doesn't have a value yet,
+			 set the value.  Otherwise, assign using the value as
+			 normal. */
+		      if (nameref_cell (nv) == 0)
+			return (bind_variable_internal (nv->name, value, nvc->table, 0, flags));
+#if defined (ARRAY_VARS)
+		      else if (valid_array_reference (nameref_cell (nv), 0))
+			return (assign_array_element (nameref_cell (nv), value, flags));
+		      else
+#endif
+		      return (bind_variable_internal (nameref_cell (nv), value, nvc->table, 0, flags));
+		    }
+		  else if (nv == &nameref_maxloop_value)
+		    {
+		      internal_warning (_("%s: circular name reference"), v->name);
+		      return (bind_global_variable (v->name, value, flags));
+		    }
+		  else
+		    v = nv;
+		}
+	      else if (nv == &nameref_maxloop_value)
+		{
+		  internal_warning (_("%s: circular name reference"), v->name);
+		  return (bind_global_variable (v->name, value, flags));
+		}
+	      else
+	        v = nv;
+	    }
+	  if (v)
+	    return (bind_variable_internal (v->name, value, nvc->table, 0, flags));
+	}
+    }
+  /* bind_variable_internal will handle nameref resolution in this case */
+  return (bind_variable_internal (name, value, global_variables->table, 0, flags));
+}
+
+SHELL_VAR *
+bind_global_variable (name, value, flags)
+     const char *name;
+     char *value;
+     int flags;
+{
+  if (shell_variables == 0)
+    create_variable_tables ();
+
+  /* bind_variable_internal will handle nameref resolution in this case */
+  return (bind_variable_internal (name, value, global_variables->table, 0, flags));
+}
+
+static SHELL_VAR *
+bind_invalid_envvar (name, value, flags)
+     const char *name;
+     char *value;
+     int flags;
+{
+  if (invalid_env == 0)
+    invalid_env = hash_create (64);	/* XXX */
+  return (bind_variable_internal (name, value, invalid_env, HASH_NOSRCH, flags));
+}
+
+/* Make VAR, a simple shell variable, have value VALUE.  Once assigned a
+   value, variables are no longer invisible.  This is a duplicate of part
+   of the internals of bind_variable.  If the variable is exported, or
+   all modified variables should be exported, mark the variable for export
+   and note that the export environment needs to be recreated. */
+SHELL_VAR *
+bind_variable_value (var, value, aflags)
+     SHELL_VAR *var;
+     char *value;
+     int aflags;
+{
+  char *t;
+  int invis;
+
+  invis = invisible_p (var);
+  VUNSETATTR (var, att_invisible);
+
+  if (var->assign_func)
+    {
+      /* If we're appending, we need the old value, so use
+	 make_variable_value */
+      t = (aflags & ASS_APPEND) ? make_variable_value (var, value, aflags) : value;
+      (*(var->assign_func)) (var, t, -1, 0);
+      if (t != value && t)
+	free (t);      
+    }
+  else
+    {
+      t = make_variable_value (var, value, aflags);
+      if ((aflags & (ASS_NAMEREF|ASS_FORCE)) == ASS_NAMEREF && check_selfref (name_cell (var), t, 0))
+	{
+	  if (variable_context)
+	    internal_warning (_("%s: circular name reference"), name_cell (var));
+	  else
+	    {
+	      internal_error (_("%s: nameref variable self references not allowed"), name_cell (var));
+	      free (t);
+	      if (invis)
+		VSETATTR (var, att_invisible);	/* XXX */
+	      return ((SHELL_VAR *)NULL);
+	    }
+	}
+      if ((aflags & ASS_NAMEREF) && (valid_nameref_value (t, 0) == 0))
+	{
+	  free (t);
+	  if (invis)
+	    VSETATTR (var, att_invisible);	/* XXX */
+	  return ((SHELL_VAR *)NULL);
+	}
+      FREE (value_cell (var));
+      var_setvalue (var, t);
+    }
+
+  INVALIDATE_EXPORTSTR (var);
+
+  if (mark_modified_vars)
+    VSETATTR (var, att_exported);
+
+  if (exported_p (var))
+    array_needs_making = 1;
+
+  return (var);
+}
+
+/* Bind/create a shell variable with the name LHS to the RHS.
+   This creates or modifies a variable such that it is an integer.
+
+   This used to be in expr.c, but it is here so that all of the
+   variable binding stuff is localized.  Since we don't want any
+   recursive evaluation from bind_variable() (possible without this code,
+   since bind_variable() calls the evaluator for variables with the integer
+   attribute set), we temporarily turn off the integer attribute for each
+   variable we set here, then turn it back on after binding as necessary. */
+
+SHELL_VAR *
+bind_int_variable (lhs, rhs, flags)
+     char *lhs, *rhs;
+     int flags;
+{
+  register SHELL_VAR *v;
+  int isint, isarr, implicitarray;
+
+  isint = isarr = implicitarray = 0;
+#if defined (ARRAY_VARS)
+  if (valid_array_reference (lhs, (flags & ASS_NOEXPAND) != 0))
+    {
+      isarr = 1;
+      v = array_variable_part (lhs, (flags & ASS_NOEXPAND) != 0, (char **)0, (int *)0);
+    }
+  else if (legal_identifier (lhs) == 0)
+    {
+      sh_invalidid (lhs);
+      return ((SHELL_VAR *)NULL);      
+    }
+  else
+#endif
+    v = find_variable (lhs);
+
+  if (v)
+    {
+      isint = integer_p (v);
+      VUNSETATTR (v, att_integer);
+#if defined (ARRAY_VARS)
+      if (array_p (v) && isarr == 0)
+	implicitarray = 1;
+#endif
+    }
+
+#if defined (ARRAY_VARS)
+  if (isarr)
+    v = assign_array_element (lhs, rhs, flags);
+  else if (implicitarray)
+    v = bind_array_variable (lhs, 0, rhs, 0);	/* XXX - check on flags */
+  else
+#endif
+    v = bind_variable (lhs, rhs, 0);	/* why not use bind_variable_value? */
+
+  if (v)
+    {
+      if (isint)
+	VSETATTR (v, att_integer);
+      VUNSETATTR (v, att_invisible);
+    }
+
+  if (v && nameref_p (v))
+    internal_warning (_("%s: assigning integer to name reference"), lhs);
+     
+  return (v);
+}
+
+SHELL_VAR *
+bind_var_to_int (var, val)
+     char *var;
+     intmax_t val;
+{
+  char ibuf[INT_STRLEN_BOUND (intmax_t) + 1], *p;
+
+  p = fmtulong (val, 10, ibuf, sizeof (ibuf), 0);
+  return (bind_int_variable (var, p, 0));
+}
+
+/* Do a function binding to a variable.  You pass the name and
+   the command to bind to.  This conses the name and command. */
+SHELL_VAR *
+bind_function (name, value)
+     const char *name;
+     COMMAND *value;
+{
+  SHELL_VAR *entry;
+
+  entry = find_function (name);
+  if (entry == 0)
+    {
+      BUCKET_CONTENTS *elt;
+
+      elt = hash_insert (savestring (name), shell_functions, HASH_NOSRCH);
+      entry = new_shell_variable (name);
+      elt->data = (PTR_T)entry;
+    }
+  else
+    INVALIDATE_EXPORTSTR (entry);
+
+  if (var_isset (entry))
+    dispose_command (function_cell (entry));
+
+  if (value)
+    var_setfunc (entry, copy_command (value));
+  else
+    var_setfunc (entry, 0);
+
+  VSETATTR (entry, att_function);
+
+  if (mark_modified_vars)
+    VSETATTR (entry, att_exported);
+
+  VUNSETATTR (entry, att_invisible);		/* Just to be sure */
+
+  if (exported_p (entry))
+    array_needs_making = 1;
+
+#if defined (PROGRAMMABLE_COMPLETION)
+  set_itemlist_dirty (&it_functions);
+#endif
+
+  return (entry);
+}
+
+#if defined (DEBUGGER)
+/* Bind a function definition, which includes source file and line number
+   information in addition to the command, into the FUNCTION_DEF hash table.
+   If (FLAGS & 1), overwrite any existing definition. If FLAGS == 0, leave
+   any existing definition alone. */
+void
+bind_function_def (name, value, flags)
+     const char *name;
+     FUNCTION_DEF *value;
+     int flags;
+{
+  FUNCTION_DEF *entry;
+  BUCKET_CONTENTS *elt;
+  COMMAND *cmd;
+
+  entry = find_function_def (name);
+  if (entry && (flags & 1))
+    {
+      dispose_function_def_contents (entry);
+      entry = copy_function_def_contents (value, entry);
+    }
+  else if (entry)
+    return;
+  else
+    {
+      cmd = value->command;
+      value->command = 0;
+      entry = copy_function_def (value);
+      value->command = cmd;
+
+      elt = hash_insert (savestring (name), shell_function_defs, HASH_NOSRCH);
+      elt->data = (PTR_T *)entry;
+    }
+}
+#endif /* DEBUGGER */
+
+/* Add STRING, which is of the form foo=bar, to the temporary environment
+   HASH_TABLE (temporary_env).  The functions in execute_cmd.c are
+   responsible for moving the main temporary env to one of the other
+   temporary environments.  The expansion code in subst.c calls this. */
+int
+assign_in_env (word, flags)
+     WORD_DESC *word;
+     int flags;
+{
+  int offset, aflags;
+  char *name, *temp, *value, *newname;
+  SHELL_VAR *var;
+  const char *string;
+
+  string = word->word;
+
+  aflags = 0;
+  offset = assignment (string, 0);
+  newname = name = savestring (string);
+  value = (char *)NULL;
+
+  if (name[offset] == '=')
+    {
+      name[offset] = 0;
+
+      /* don't ignore the `+' when assigning temporary environment */
+      if (name[offset - 1] == '+')
+	{
+	  name[offset - 1] = '\0';
+	  aflags |= ASS_APPEND;
+	}
+
+      if (legal_identifier (name) == 0)
+	{
+	  sh_invalidid (name);
+	  return (0);
+	}
+  
+      var = find_variable (name);
+      if (var == 0)
+	{
+	  var = find_variable_last_nameref (name, 1);
+	  /* If we're assigning a value to a nameref variable in the temp
+	     environment, and the value of the nameref is valid for assignment,
+	     but the variable does not already exist, assign to the nameref
+	     target and add the target to the temporary environment.  This is
+	     what ksh93 does */
+	  /* We use 2 in the call to valid_nameref_value because we don't want
+	     to allow array references here at all (newname will be used to
+	     create a variable directly below) */
+	  if (var && nameref_p (var) && valid_nameref_value (nameref_cell (var), 2))
+	    {
+	      newname = nameref_cell (var);
+	      var = 0;		/* don't use it for append */
+	    }
+	}
+      else
+        newname = name_cell (var);	/* no-op if not nameref */
+	  
+      if (var && (readonly_p (var) || noassign_p (var)))
+	{
+	  if (readonly_p (var))
+	    err_readonly (name);
+	  free (name);
+  	  return (0);
+	}
+      temp = name + offset + 1;
+
+      value = expand_assignment_string_to_string (temp, 0);
+
+      if (var && (aflags & ASS_APPEND))
+	{
+	  if (value == 0)
+	    {
+	      value = (char *)xmalloc (1);	/* like do_assignment_internal */
+	      value[0] = '\0';
+	    }
+	  temp = make_variable_value (var, value, aflags);
+	  FREE (value);
+	  value = temp;
+	}
+    }
+
+  if (temporary_env == 0)
+    temporary_env = hash_create (TEMPENV_HASH_BUCKETS);
+
+  var = hash_lookup (newname, temporary_env);
+  if (var == 0)
+    var = make_new_variable (newname, temporary_env);
+  else
+    FREE (value_cell (var));
+
+  if (value == 0)
+    {
+      value = (char *)xmalloc (1);	/* see above */
+      value[0] = '\0';
+    }
+
+  var_setvalue (var, value);
+  var->attributes |= (att_exported|att_tempvar);
+  var->context = variable_context;	/* XXX */
+
+  INVALIDATE_EXPORTSTR (var);
+  var->exportstr = mk_env_string (newname, value, 0);
+
+  array_needs_making = 1;
+
+  if (flags)
+    {
+      if (STREQ (newname, "POSIXLY_CORRECT") || STREQ (newname, "POSIX_PEDANDTIC"))
+	save_posix_options ();		/* XXX one level of saving right now */
+      stupidly_hack_special_variables (newname);
+    }
+
+  if (echo_command_at_execute)
+    /* The Korn shell prints the `+ ' in front of assignment statements,
+	so we do too. */
+    xtrace_print_assignment (name, value, 0, 1);
+
+  free (name);
+  return 1;
+}
+
+/* **************************************************************** */
+/*								    */
+/*			Copying variables			    */
+/*								    */
+/* **************************************************************** */
+
+#ifdef INCLUDE_UNUSED
+/* Copy VAR to a new data structure and return that structure. */
+SHELL_VAR *
+copy_variable (var)
+     SHELL_VAR *var;
+{
+  SHELL_VAR *copy = (SHELL_VAR *)NULL;
+
+  if (var)
+    {
+      copy = (SHELL_VAR *)xmalloc (sizeof (SHELL_VAR));
+
+      copy->attributes = var->attributes;
+      copy->name = savestring (var->name);
+
+      if (function_p (var))
+	var_setfunc (copy, copy_command (function_cell (var)));
+#if defined (ARRAY_VARS)
+      else if (array_p (var))
+	var_setarray (copy, array_copy (array_cell (var)));
+      else if (assoc_p (var))
+	var_setassoc (copy, assoc_copy (assoc_cell (var)));
+#endif
+      else if (nameref_cell (var))	/* XXX - nameref */
+	var_setref (copy, savestring (nameref_cell (var)));
+      else if (value_cell (var))	/* XXX - nameref */
+	var_setvalue (copy, savestring (value_cell (var)));
+      else
+	var_setvalue (copy, (char *)NULL);
+
+      copy->dynamic_value = var->dynamic_value;
+      copy->assign_func = var->assign_func;
+
+      copy->exportstr = COPY_EXPORTSTR (var);
+
+      copy->context = var->context;
+    }
+  return (copy);
+}
+#endif
+
+/* **************************************************************** */
+/*								    */
+/*		  Deleting and unsetting variables		    */
+/*								    */
+/* **************************************************************** */
+
+/* Dispose of the information attached to VAR. */
+static void
+dispose_variable_value (var)
+     SHELL_VAR *var;
+{
+  if (function_p (var))
+    dispose_command (function_cell (var));
+#if defined (ARRAY_VARS)
+  else if (array_p (var))
+    array_dispose (array_cell (var));
+  else if (assoc_p (var))
+    assoc_dispose (assoc_cell (var));
+#endif
+  else if (nameref_p (var))
+    FREE (nameref_cell (var));
+  else
+    FREE (value_cell (var));
+}
+
+void
+dispose_variable (var)
+     SHELL_VAR *var;
+{
+  if (var == 0)
+    return;
+
+  if (nofree_p (var) == 0)
+    dispose_variable_value (var);
+
+  FREE_EXPORTSTR (var);
+
+  free (var->name);
+
+  if (exported_p (var))
+    array_needs_making = 1;
+
+  free (var);
+}
+
+/* Unset the shell variable referenced by NAME.  Unsetting a nameref variable
+   unsets the variable it resolves to but leaves the nameref alone. */
+int
+unbind_variable (name)
+     const char *name;
+{
+  SHELL_VAR *v, *nv;
+  int r;
+
+  v = var_lookup (name, shell_variables);
+  nv = (v && nameref_p (v)) ? find_variable_nameref (v) : (SHELL_VAR *)NULL;
+
+  r = nv ? makunbound (nv->name, shell_variables) : makunbound (name, shell_variables);
+  return r;
+}
+
+/* Unbind NAME, where NAME is assumed to be a nameref variable */
+int
+unbind_nameref (name)
+     const char *name;
+{
+  SHELL_VAR *v;
+
+  v = var_lookup (name, shell_variables);
+  if (v && nameref_p (v))
+    return makunbound (name, shell_variables);
+  return 0;
+}
+
+/* Unbind the first instance of NAME, whether it's a nameref or not */
+int
+unbind_variable_noref (name)
+     const char *name;
+{
+  SHELL_VAR *v;
+
+  v = var_lookup (name, shell_variables);
+  if (v)
+    return makunbound (name, shell_variables);
+  return 0;
+}
+
+int
+check_unbind_variable (name)
+     const char *name;
+{
+  SHELL_VAR *v;
+
+  v = find_variable (name);
+  if (v && readonly_p (v))
+    {
+      internal_error (_("%s: cannot unset: readonly %s"), name, "variable");
+      return -2;
+    }
+  else if (v && non_unsettable_p (v))
+    {
+      internal_error (_("%s: cannot unset"), name);
+      return -2;
+    }
+  return (unbind_variable (name));
+}
+
+/* Unset the shell function named NAME. */
+int
+unbind_func (name)
+     const char *name;
+{
+  BUCKET_CONTENTS *elt;
+  SHELL_VAR *func;
+
+  elt = hash_remove (name, shell_functions, 0);
+
+  if (elt == 0)
+    return -1;
+
+#if defined (PROGRAMMABLE_COMPLETION)
+  set_itemlist_dirty (&it_functions);
+#endif
+
+  func = (SHELL_VAR *)elt->data;
+  if (func)
+    {
+      if (exported_p (func))
+	array_needs_making++;
+      dispose_variable (func);
+    }
+
+  free (elt->key);
+  free (elt);
+
+  return 0;  
+}
+
+#if defined (DEBUGGER)
+int
+unbind_function_def (name)
+     const char *name;
+{
+  BUCKET_CONTENTS *elt;
+  FUNCTION_DEF *funcdef;
+
+  elt = hash_remove (name, shell_function_defs, 0);
+
+  if (elt == 0)
+    return -1;
+
+  funcdef = (FUNCTION_DEF *)elt->data;
+  if (funcdef)
+    dispose_function_def (funcdef);
+
+  free (elt->key);
+  free (elt);
+
+  return 0;  
+}
+#endif /* DEBUGGER */
+
+int
+delete_var (name, vc)
+     const char *name;
+     VAR_CONTEXT *vc;
+{
+  BUCKET_CONTENTS *elt;
+  SHELL_VAR *old_var;
+  VAR_CONTEXT *v;
+
+  for (elt = (BUCKET_CONTENTS *)NULL, v = vc; v; v = v->down)
+    if (elt = hash_remove (name, v->table, 0))
+      break;
+
+  if (elt == 0)
+    return (-1);
+
+  old_var = (SHELL_VAR *)elt->data;
+  free (elt->key);
+  free (elt);
+
+  dispose_variable (old_var);
+  return (0);
+}
+
+/* Make the variable associated with NAME go away.  HASH_LIST is the
+   hash table from which this variable should be deleted (either
+   shell_variables or shell_functions).
+   Returns non-zero if the variable couldn't be found. */
+int
+makunbound (name, vc)
+     const char *name;
+     VAR_CONTEXT *vc;
+{
+  BUCKET_CONTENTS *elt, *new_elt;
+  SHELL_VAR *old_var;
+  VAR_CONTEXT *v;
+  char *t;
+
+  for (elt = (BUCKET_CONTENTS *)NULL, v = vc; v; v = v->down)
+    if (elt = hash_remove (name, v->table, 0))
+      break;
+
+  if (elt == 0)
+    return (-1);
+
+  old_var = (SHELL_VAR *)elt->data;
+
+  if (old_var && exported_p (old_var))
+    array_needs_making++;
+
+  /* If we're unsetting a local variable and we're still executing inside
+     the function, just mark the variable as invisible.  The function
+     eventually called by pop_var_context() will clean it up later.  This
+     must be done so that if the variable is subsequently assigned a new
+     value inside the function, the `local' attribute is still present.
+     We also need to add it back into the correct hash table. */
+  if (old_var && local_p (old_var) &&
+	(old_var->context == variable_context || (localvar_unset && old_var->context < variable_context)))
+    {
+      if (nofree_p (old_var))
+	var_setvalue (old_var, (char *)NULL);
+#if defined (ARRAY_VARS)
+      else if (array_p (old_var))
+	array_dispose (array_cell (old_var));
+      else if (assoc_p (old_var))
+	assoc_dispose (assoc_cell (old_var));
+#endif
+      else if (nameref_p (old_var))
+	FREE (nameref_cell (old_var));
+      else
+	FREE (value_cell (old_var));
+      /* Reset the attributes.  Preserve the export attribute if the variable
+	 came from a temporary environment.  Make sure it stays local, and
+	 make it invisible. */ 
+      old_var->attributes = (exported_p (old_var) && tempvar_p (old_var)) ? att_exported : 0;
+      VSETATTR (old_var, att_local);
+      VSETATTR (old_var, att_invisible);
+      var_setvalue (old_var, (char *)NULL);
+      INVALIDATE_EXPORTSTR (old_var);
+
+      new_elt = hash_insert (savestring (old_var->name), v->table, 0);
+      new_elt->data = (PTR_T)old_var;
+      stupidly_hack_special_variables (old_var->name);
+
+      free (elt->key);
+      free (elt);
+      return (0);
+    }
+
+  /* Have to save a copy of name here, because it might refer to
+     old_var->name.  If so, stupidly_hack_special_variables will
+     reference freed memory. */
+  t = savestring (name);
+
+  free (elt->key);
+  free (elt);
+
+  dispose_variable (old_var);
+  stupidly_hack_special_variables (t);
+  free (t);
+
+  return (0);
+}
+
+/* Get rid of all of the variables in the current context. */
+void
+kill_all_local_variables ()
+{
+  VAR_CONTEXT *vc;
+
+  for (vc = shell_variables; vc; vc = vc->down)
+    if (vc_isfuncenv (vc) && vc->scope == variable_context)
+      break;
+  if (vc == 0)
+    return;		/* XXX */
+
+  if (vc->table && vc_haslocals (vc))
+    {
+      delete_all_variables (vc->table);
+      hash_dispose (vc->table);
+    }
+  vc->table = (HASH_TABLE *)NULL;
+}
+
+static void
+free_variable_hash_data (data)
+     PTR_T data;
+{
+  SHELL_VAR *var;
+
+  var = (SHELL_VAR *)data;
+  dispose_variable (var);
+}
+
+/* Delete the entire contents of the hash table. */
+void
+delete_all_variables (hashed_vars)
+     HASH_TABLE *hashed_vars;
+{
+  hash_flush (hashed_vars, free_variable_hash_data);
+}
+
+/* **************************************************************** */
+/*								    */
+/*		     Setting variable attributes		    */
+/*								    */
+/* **************************************************************** */
+
+#define FIND_OR_MAKE_VARIABLE(name, entry) \
+  do \
+    { \
+      entry = find_variable (name); \
+      if (!entry) \
+	{ \
+	  entry = bind_variable (name, "", 0); \
+	  if (entry) entry->attributes |= att_invisible; \
+	} \
+    } \
+  while (0)
+
+/* Make the variable associated with NAME be readonly.
+   If NAME does not exist yet, create it. */
+void
+set_var_read_only (name)
+     char *name;
+{
+  SHELL_VAR *entry;
+
+  FIND_OR_MAKE_VARIABLE (name, entry);
+  VSETATTR (entry, att_readonly);
+}
+
+#ifdef INCLUDE_UNUSED
+/* Make the function associated with NAME be readonly.
+   If NAME does not exist, we just punt, like auto_export code below. */
+void
+set_func_read_only (name)
+     const char *name;
+{
+  SHELL_VAR *entry;
+
+  entry = find_function (name);
+  if (entry)
+    VSETATTR (entry, att_readonly);
+}
+
+/* Make the variable associated with NAME be auto-exported.
+   If NAME does not exist yet, create it. */
+void
+set_var_auto_export (name)
+     char *name;
+{
+  SHELL_VAR *entry;
+
+  FIND_OR_MAKE_VARIABLE (name, entry);
+  set_auto_export (entry);
+}
+
+/* Make the function associated with NAME be auto-exported. */
+void
+set_func_auto_export (name)
+     const char *name;
+{
+  SHELL_VAR *entry;
+
+  entry = find_function (name);
+  if (entry)
+    set_auto_export (entry);
+}
+#endif
+
+/* **************************************************************** */
+/*								    */
+/*		     Creating lists of variables		    */
+/*								    */
+/* **************************************************************** */
+
+static VARLIST *
+vlist_alloc (nentries)
+     int nentries;
+{
+  VARLIST  *vlist;
+
+  vlist = (VARLIST *)xmalloc (sizeof (VARLIST));
+  vlist->list = (SHELL_VAR **)xmalloc ((nentries + 1) * sizeof (SHELL_VAR *));
+  vlist->list_size = nentries;
+  vlist->list_len = 0;
+  vlist->list[0] = (SHELL_VAR *)NULL;
+
+  return vlist;
+}
+
+static VARLIST *
+vlist_realloc (vlist, n)
+     VARLIST *vlist;
+     int n;
+{
+  if (vlist == 0)
+    return (vlist = vlist_alloc (n));
+  if (n > vlist->list_size)
+    {
+      vlist->list_size = n;
+      vlist->list = (SHELL_VAR **)xrealloc (vlist->list, (vlist->list_size + 1) * sizeof (SHELL_VAR *));
+    }
+  return vlist;
+}
+
+static void
+vlist_add (vlist, var, flags)
+     VARLIST *vlist;
+     SHELL_VAR *var;
+     int flags;
+{
+  register int i;
+
+  for (i = 0; i < vlist->list_len; i++)
+    if (STREQ (var->name, vlist->list[i]->name))
+      break;
+  if (i < vlist->list_len)
+    return;
+
+  if (i >= vlist->list_size)
+    vlist = vlist_realloc (vlist, vlist->list_size + 16);
+
+  vlist->list[vlist->list_len++] = var;
+  vlist->list[vlist->list_len] = (SHELL_VAR *)NULL;
+}
+
+/* Map FUNCTION over the variables in VAR_HASH_TABLE.  Return an array of the
+   variables for which FUNCTION returns a non-zero value.  A NULL value
+   for FUNCTION means to use all variables. */
+SHELL_VAR **
+map_over (function, vc)
+     sh_var_map_func_t *function;
+     VAR_CONTEXT *vc;
+{
+  VAR_CONTEXT *v;
+  VARLIST *vlist;
+  SHELL_VAR **ret;
+  int nentries;
+
+  for (nentries = 0, v = vc; v; v = v->down)
+    nentries += HASH_ENTRIES (v->table);
+
+  if (nentries == 0)
+    return (SHELL_VAR **)NULL;
+
+  vlist = vlist_alloc (nentries);
+
+  for (v = vc; v; v = v->down)
+    flatten (v->table, function, vlist, 0);
+
+  ret = vlist->list;
+  free (vlist);
+  return ret;
+}
+
+SHELL_VAR **
+map_over_funcs (function)
+     sh_var_map_func_t *function;
+{
+  VARLIST *vlist;
+  SHELL_VAR **ret;
+
+  if (shell_functions == 0 || HASH_ENTRIES (shell_functions) == 0)
+    return ((SHELL_VAR **)NULL);
+
+  vlist = vlist_alloc (HASH_ENTRIES (shell_functions));
+
+  flatten (shell_functions, function, vlist, 0);
+
+  ret = vlist->list;
+  free (vlist);
+  return ret;
+}
+
+/* Flatten VAR_HASH_TABLE, applying FUNC to each member and adding those
+   elements for which FUNC succeeds to VLIST->list.  FLAGS is reserved
+   for future use.  Only unique names are added to VLIST.  If FUNC is
+   NULL, each variable in VAR_HASH_TABLE is added to VLIST.  If VLIST is
+   NULL, FUNC is applied to each SHELL_VAR in VAR_HASH_TABLE.  If VLIST
+   and FUNC are both NULL, nothing happens. */
+static void
+flatten (var_hash_table, func, vlist, flags)
+     HASH_TABLE *var_hash_table;
+     sh_var_map_func_t *func;
+     VARLIST *vlist;
+     int flags;
+{
+  register int i;
+  register BUCKET_CONTENTS *tlist;
+  int r;
+  SHELL_VAR *var;
+
+  if (var_hash_table == 0 || (HASH_ENTRIES (var_hash_table) == 0) || (vlist == 0 && func == 0))
+    return;
+
+  for (i = 0; i < var_hash_table->nbuckets; i++)
+    {
+      for (tlist = hash_items (i, var_hash_table); tlist; tlist = tlist->next)
+	{
+	  var = (SHELL_VAR *)tlist->data;
+
+	  r = func ? (*func) (var) : 1;
+	  if (r && vlist)
+	    vlist_add (vlist, var, flags);
+	}
+    }
+}
+
+void
+sort_variables (array)
+     SHELL_VAR **array;
+{
+  qsort (array, strvec_len ((char **)array), sizeof (SHELL_VAR *), (QSFUNC *)qsort_var_comp);
+}
+
+static int
+qsort_var_comp (var1, var2)
+     SHELL_VAR **var1, **var2;
+{
+  int result;
+
+  if ((result = (*var1)->name[0] - (*var2)->name[0]) == 0)
+    result = strcmp ((*var1)->name, (*var2)->name);
+
+  return (result);
+}
+
+/* Apply FUNC to each variable in SHELL_VARIABLES, adding each one for
+   which FUNC succeeds to an array of SHELL_VAR *s.  Returns the array. */
+static SHELL_VAR **
+vapply (func)
+     sh_var_map_func_t *func;
+{
+  SHELL_VAR **list;
+
+  list = map_over (func, shell_variables);
+  if (list /* && posixly_correct */)
+    sort_variables (list);
+  return (list);
+}
+
+/* Apply FUNC to each variable in SHELL_FUNCTIONS, adding each one for
+   which FUNC succeeds to an array of SHELL_VAR *s.  Returns the array. */
+static SHELL_VAR **
+fapply (func)
+     sh_var_map_func_t *func;
+{
+  SHELL_VAR **list;
+
+  list = map_over_funcs (func);
+  if (list /* && posixly_correct */)
+    sort_variables (list);
+  return (list);
+}
+
+/* Create a NULL terminated array of all the shell variables. */
+SHELL_VAR **
+all_shell_variables ()
+{
+  return (vapply ((sh_var_map_func_t *)NULL));
+}
+
+/* Create a NULL terminated array of all the shell functions. */
+SHELL_VAR **
+all_shell_functions ()
+{
+  return (fapply ((sh_var_map_func_t *)NULL));
+}
+
+static int
+visible_var (var)
+     SHELL_VAR *var;
+{
+  return (invisible_p (var) == 0);
+}
+
+SHELL_VAR **
+all_visible_functions ()
+{
+  return (fapply (visible_var));
+}
+
+SHELL_VAR **
+all_visible_variables ()
+{
+  return (vapply (visible_var));
+}
+
+/* Return non-zero if the variable VAR is visible and exported.  Array
+   variables cannot be exported. */
+static int
+visible_and_exported (var)
+     SHELL_VAR *var;
+{
+  return (invisible_p (var) == 0 && exported_p (var));
+}
+
+/* Candidate variables for the export environment are either valid variables
+   with the export attribute or invalid variables inherited from the initial
+   environment and simply passed through. */
+static int
+export_environment_candidate (var)
+     SHELL_VAR *var;
+{
+  return (exported_p (var) && (invisible_p (var) == 0 || imported_p (var)));
+}
+
+/* Return non-zero if VAR is a local variable in the current context and
+   is exported. */
+static int
+local_and_exported (var)
+     SHELL_VAR *var;
+{
+  return (invisible_p (var) == 0 && local_p (var) && var->context == variable_context && exported_p (var));
+}
+
+SHELL_VAR **
+all_exported_variables ()
+{
+  return (vapply (visible_and_exported));
+}
+
+SHELL_VAR **
+local_exported_variables ()
+{
+  return (vapply (local_and_exported));
+}
+
+static int
+variable_in_context (var)
+     SHELL_VAR *var;
+{
+  return (local_p (var) && var->context == variable_context);
+}
+
+static int
+visible_variable_in_context (var)
+     SHELL_VAR *var;
+{
+  return (invisible_p (var) == 0 && local_p (var) && var->context == variable_context);
+}
+
+SHELL_VAR **
+all_local_variables (visible_only)
+     int visible_only;
+{
+  VARLIST *vlist;
+  SHELL_VAR **ret;
+  VAR_CONTEXT *vc;
+
+  vc = shell_variables;
+  for (vc = shell_variables; vc; vc = vc->down)
+    if (vc_isfuncenv (vc) && vc->scope == variable_context)
+      break;
+
+  if (vc == 0)
+    {
+      internal_error (_("all_local_variables: no function context at current scope"));
+      return (SHELL_VAR **)NULL;
+    }
+  if (vc->table == 0 || HASH_ENTRIES (vc->table) == 0 || vc_haslocals (vc) == 0)
+    return (SHELL_VAR **)NULL;
+    
+  vlist = vlist_alloc (HASH_ENTRIES (vc->table));
+
+  if (visible_only)
+    flatten (vc->table, visible_variable_in_context, vlist, 0);
+  else
+    flatten (vc->table, variable_in_context, vlist, 0);
+
+  ret = vlist->list;
+  free (vlist);
+  if (ret)
+    sort_variables (ret);
+  return ret;
+}
+
+#if defined (ARRAY_VARS)
+/* Return non-zero if the variable VAR is visible and an array. */
+static int
+visible_array_vars (var)
+     SHELL_VAR *var;
+{
+  return (invisible_p (var) == 0 && (array_p (var) || assoc_p (var)));
+}
+
+SHELL_VAR **
+all_array_variables ()
+{
+  return (vapply (visible_array_vars));
+}
+#endif /* ARRAY_VARS */
+
+char **
+all_variables_matching_prefix (prefix)
+     const char *prefix;
+{
+  SHELL_VAR **varlist;
+  char **rlist;
+  int vind, rind, plen;
+
+  plen = STRLEN (prefix);
+  varlist = all_visible_variables ();
+  for (vind = 0; varlist && varlist[vind]; vind++)
+    ;
+  if (varlist == 0 || vind == 0)
+    return ((char **)NULL);
+  rlist = strvec_create (vind + 1);
+  for (vind = rind = 0; varlist[vind]; vind++)
+    {
+      if (plen == 0 || STREQN (prefix, varlist[vind]->name, plen))
+	rlist[rind++] = savestring (varlist[vind]->name);
+    }
+  rlist[rind] = (char *)0;
+  free (varlist);
+
+  return rlist;
+}
+
+/* **************************************************************** */
+/*								    */
+/*		 Managing temporary variable scopes		    */
+/*								    */
+/* **************************************************************** */
+
+/* Make variable NAME have VALUE in the temporary environment. */
+static SHELL_VAR *
+bind_tempenv_variable (name, value)
+     const char *name;
+     char *value;
+{
+  SHELL_VAR *var;
+
+  var = temporary_env ? hash_lookup (name, temporary_env) : (SHELL_VAR *)NULL;
+
+  if (var)
+    {
+      FREE (value_cell (var));
+      var_setvalue (var, savestring (value));
+      INVALIDATE_EXPORTSTR (var);
+    }
+
+  return (var);
+}
+
+/* Find a variable in the temporary environment that is named NAME.
+   Return the SHELL_VAR *, or NULL if not found. */
+SHELL_VAR *
+find_tempenv_variable (name)
+     const char *name;
+{
+  return (temporary_env ? hash_lookup (name, temporary_env) : (SHELL_VAR *)NULL);
+}
+
+char **tempvar_list;
+int tvlist_ind;
+
+/* Take a variable from an assignment statement preceding a posix special
+   builtin (including `return') and create a global variable from it. This
+   is called from merge_temporary_env, which is only called when in posix
+   mode. */
+static void
+push_posix_temp_var (data)
+     PTR_T data;
+{
+  SHELL_VAR *var, *v;
+  HASH_TABLE *binding_table;
+
+  var = (SHELL_VAR *)data;
+
+  /* Just like do_assignment_internal(). This makes assignments preceding
+     special builtins act like standalone assignment statements when in
+     posix mode, satisfying the posix requirement that this affect the
+     "current execution environment." */
+  v = bind_variable (var->name, value_cell (var), ASS_FORCE|ASS_NOLONGJMP);
+
+  /* XXX - do we need to worry about array variables here? */
+
+  /* If this modifies an existing local variable, v->context will be non-zero.
+     If it comes back with v->context == 0, we bound at the global context.
+     Set binding_table appropriately. It doesn't matter whether it's correct
+     if the variable is local, only that it's not global_variables->table */
+  binding_table = v->context ? shell_variables->table : global_variables->table;
+
+  /* global variables are no longer temporary and don't need propagating. */
+  if (v->context == 0)
+    var->attributes &= ~(att_tempvar|att_propagate);
+
+  if (v)
+    {
+      v->attributes |= var->attributes;		/* preserve tempvar attribute if appropriate */
+      /* If we don't bind a local variable, propagate the value. If we bind a
+	 local variable (the "current execution environment"), keep it as local
+	 and don't propagate it to the calling environment. */
+      if (v->context > 0 && local_p (v) == 0)
+	v->attributes |= att_propagate;
+      else
+	v->attributes &= ~att_propagate;
+    }
+
+  if (find_special_var (var->name) >= 0)
+    tempvar_list[tvlist_ind++] = savestring (var->name);
+
+  dispose_variable (var);
+}
+
+/* Push the variable described by (SHELL_VAR *)DATA down to the next
+   variable context from the temporary environment. This can be called
+   from one context:
+      1. propagate_temp_var: which is called to propagate variables in
+	 assignments like `var=value declare -x var' to the surrounding
+	 scope.
+
+  In this case, the variable should have the att_propagate flag set and
+  we can create variables in the current scope.
+*/
+static void
+push_temp_var (data)
+     PTR_T data;
+{
+  SHELL_VAR *var, *v;
+  HASH_TABLE *binding_table;
+
+  var = (SHELL_VAR *)data;
+
+  binding_table = shell_variables->table;
+  if (binding_table == 0)
+    {
+      if (shell_variables == global_variables)
+	/* shouldn't happen */
+	binding_table = shell_variables->table = global_variables->table = hash_create (VARIABLES_HASH_BUCKETS);
+      else
+	binding_table = shell_variables->table = hash_create (TEMPENV_HASH_BUCKETS);
+    }
+
+  v = bind_variable_internal (var->name, value_cell (var), binding_table, 0, ASS_FORCE|ASS_NOLONGJMP);
+
+  /* XXX - should we set the context here?  It shouldn't matter because of how
+     assign_in_env works, but we do it anyway. */
+  if (v)
+    v->context = shell_variables->scope;
+
+  if (binding_table == global_variables->table)		/* XXX */
+    var->attributes &= ~(att_tempvar|att_propagate);
+  else
+    {
+      var->attributes |= att_propagate;			/* XXX - propagate more than once? */
+      if  (binding_table == shell_variables->table)
+	shell_variables->flags |= VC_HASTMPVAR;
+    }
+  if (v)
+    v->attributes |= var->attributes;
+
+  if (find_special_var (var->name) >= 0)
+    tempvar_list[tvlist_ind++] = savestring (var->name);
+
+  dispose_variable (var);
+}
+
+/* Take a variable described by DATA and push it to the surrounding scope if
+   the PROPAGATE attribute is set. That gets set by push_temp_var if we are
+   taking a variable like `var=value declare -x var' and propagating it to
+   the enclosing scope. */
+static void
+propagate_temp_var (data)
+     PTR_T data;
+{
+  SHELL_VAR *var;
+
+  var = (SHELL_VAR *)data;
+  if (tempvar_p (var) && (var->attributes & att_propagate))
+    push_temp_var (data);
+  else
+    {
+      if (find_special_var (var->name) >= 0)
+	tempvar_list[tvlist_ind++] = savestring (var->name);
+      dispose_variable (var);
+    }
+}
+
+/* Free the storage used in the hash table for temporary
+   environment variables.  PUSHF is a function to be called
+   to free each hash table entry.  It takes care of pushing variables
+   to previous scopes if appropriate.  PUSHF stores names of variables
+   that require special handling (e.g., IFS) on tempvar_list, so this
+   function can call stupidly_hack_special_variables on all the
+   variables in the list when the temporary hash table is destroyed. */
+static void
+dispose_temporary_env (pushf)
+     sh_free_func_t *pushf;
+{
+  int i;
+  HASH_TABLE *disposer;
+
+  tempvar_list = strvec_create (HASH_ENTRIES (temporary_env) + 1);
+  tempvar_list[tvlist_ind = 0] = 0;
+
+  disposer = temporary_env;
+  temporary_env = (HASH_TABLE *)NULL;
+
+  hash_flush (disposer, pushf);
+  hash_dispose (disposer);
+
+  tempvar_list[tvlist_ind] = 0;
+
+  array_needs_making = 1;
+
+  for (i = 0; i < tvlist_ind; i++)
+    stupidly_hack_special_variables (tempvar_list[i]);
+
+  strvec_dispose (tempvar_list);
+  tempvar_list = 0;
+  tvlist_ind = 0;
+}
+
+void
+dispose_used_env_vars ()
+{
+  if (temporary_env)
+    {
+      dispose_temporary_env (propagate_temp_var);
+      maybe_make_export_env ();
+    }
+}
+
+/* Take all of the shell variables in the temporary environment HASH_TABLE
+   and make shell variables from them at the current variable context.
+   Right now, this is only called in Posix mode to implement the historical
+   accident of creating global variables from assignment statements preceding
+   special builtins, but we check in case this acquires another caller later. */
+void
+merge_temporary_env ()
+{
+  if (temporary_env)
+    dispose_temporary_env (posixly_correct ? push_posix_temp_var : push_temp_var);
+}
+
+/* Temporary function to use if we want to separate function and special
+   builtin behavior. */
+void
+merge_function_temporary_env ()
+{
+  if (temporary_env)
+    dispose_temporary_env (push_temp_var);
+}
+
+void
+flush_temporary_env ()
+{
+  if (temporary_env)
+    {
+      hash_flush (temporary_env, free_variable_hash_data);
+      hash_dispose (temporary_env);
+      temporary_env = (HASH_TABLE *)NULL;
+    }
+}
+
+/* **************************************************************** */
+/*								    */
+/*	     Creating and manipulating the environment		    */
+/*								    */
+/* **************************************************************** */
+
+static inline char *
+mk_env_string (name, value, isfunc)
+     const char *name, *value;
+     int isfunc;
+{
+  size_t name_len, value_len;
+  char	*p, *q, *t;
+
+  name_len = strlen (name);
+  value_len = STRLEN (value);
+
+  /* If we are exporting a shell function, construct the encoded function
+     name. */
+  if (isfunc && value)
+    {
+      p = (char *)xmalloc (BASHFUNC_PREFLEN + name_len + BASHFUNC_SUFFLEN + value_len + 2);
+      q = p;
+      memcpy (q, BASHFUNC_PREFIX, BASHFUNC_PREFLEN);
+      q += BASHFUNC_PREFLEN;
+      memcpy (q, name, name_len);
+      q += name_len;
+      memcpy (q, BASHFUNC_SUFFIX, BASHFUNC_SUFFLEN);
+      q += BASHFUNC_SUFFLEN;
+    }
+  else
+    {
+      p = (char *)xmalloc (2 + name_len + value_len);
+      memcpy (p, name, name_len);
+      q = p + name_len;
+    }
+
+  q[0] = '=';
+  if (value && *value)
+    {
+      if (isfunc)
+	{
+	  t = dequote_escapes (value);
+	  value_len = STRLEN (t);
+	  memcpy (q + 1, t, value_len + 1);
+	  free (t);
+	}
+      else
+	memcpy (q + 1, value, value_len + 1);
+    }
+  else
+    q[1] = '\0';
+
+  return (p);
+}
+
+#ifdef DEBUG
+/* Debugging */
+static int
+valid_exportstr (v)
+     SHELL_VAR *v;
+{
+  char *s;
+
+  s = v->exportstr;
+  if (s == 0)
+    {
+      internal_error (_("%s has null exportstr"), v->name);
+      return (0);
+    }
+  if (legal_variable_starter ((unsigned char)*s) == 0)
+    {
+      internal_error (_("invalid character %d in exportstr for %s"), *s, v->name);
+      return (0);
+    }
+  for (s = v->exportstr + 1; s && *s; s++)
+    {
+      if (*s == '=')
+	break;
+      if (legal_variable_char ((unsigned char)*s) == 0)
+	{
+	  internal_error (_("invalid character %d in exportstr for %s"), *s, v->name);
+	  return (0);
+	}
+    }
+  if (*s != '=')
+    {
+      internal_error (_("no `=' in exportstr for %s"), v->name);
+      return (0);
+    }
+  return (1);
+}
+#endif
+
+static char **
+make_env_array_from_var_list (vars)
+     SHELL_VAR **vars;
+{
+  register int i, list_index;
+  register SHELL_VAR *var;
+  char **list, *value;
+
+  list = strvec_create ((1 + strvec_len ((char **)vars)));
+
+#define USE_EXPORTSTR (value == var->exportstr)
+
+  for (i = 0, list_index = 0; var = vars[i]; i++)
+    {
+#if defined (__CYGWIN__)
+      /* We don't use the exportstr stuff on Cygwin at all. */
+      INVALIDATE_EXPORTSTR (var);
+#endif
+
+      /* If the value is generated dynamically, generate it here. */
+      if (regen_p (var) && var->dynamic_value)
+	{
+	  var = (*(var->dynamic_value)) (var);
+	  INVALIDATE_EXPORTSTR (var);
+	}
+
+      if (var->exportstr)
+	value = var->exportstr;
+      else if (function_p (var))
+	value = named_function_string ((char *)NULL, function_cell (var), 0);
+#if defined (ARRAY_VARS)
+      else if (array_p (var))
+#  if ARRAY_EXPORT
+	value = array_to_assign (array_cell (var), 0);
+#  else
+	continue;	/* XXX array vars cannot yet be exported */
+#  endif /* ARRAY_EXPORT */
+      else if (assoc_p (var))
+#  if 0
+	value = assoc_to_assign (assoc_cell (var), 0);
+#  else
+	continue;	/* XXX associative array vars cannot yet be exported */
+#  endif
+#endif
+      else
+	value = value_cell (var);
+
+      if (value)
+	{
+	  /* Gee, I'd like to get away with not using savestring() if we're
+	     using the cached exportstr... */
+	  list[list_index] = USE_EXPORTSTR ? savestring (value)
+					   : mk_env_string (var->name, value, function_p (var));
+	  if (USE_EXPORTSTR == 0)
+	    SAVE_EXPORTSTR (var, list[list_index]);
+
+	  list_index++;
+#undef USE_EXPORTSTR
+
+#if 0	/* not yet */
+#if defined (ARRAY_VARS)
+	  if (array_p (var) || assoc_p (var))
+	    free (value);
+#endif
+#endif
+	}
+    }
+
+  list[list_index] = (char *)NULL;
+  return (list);
+}
+
+/* Make an array of assignment statements from the hash table
+   HASHED_VARS which contains SHELL_VARs.  Only visible, exported
+   variables are eligible. */
+static char **
+make_var_export_array (vcxt)
+     VAR_CONTEXT *vcxt;
+{
+  char **list;
+  SHELL_VAR **vars;
+
+#if 0
+  vars = map_over (visible_and_exported, vcxt);
+#else
+  vars = map_over (export_environment_candidate, vcxt);
+#endif
+
+  if (vars == 0)
+    return (char **)NULL;
+
+  list = make_env_array_from_var_list (vars);
+
+  free (vars);
+  return (list);
+}
+
+static char **
+make_func_export_array ()
+{
+  char **list;
+  SHELL_VAR **vars;
+
+  vars = map_over_funcs (visible_and_exported);
+  if (vars == 0)
+    return (char **)NULL;
+
+  list = make_env_array_from_var_list (vars);
+
+  free (vars);
+  return (list);
+}
+
+/* Add ENVSTR to the end of the exported environment, EXPORT_ENV. */
+#define add_to_export_env(envstr,do_alloc) \
+do \
+  { \
+    if (export_env_index >= (export_env_size - 1)) \
+      { \
+	export_env_size += 16; \
+	export_env = strvec_resize (export_env, export_env_size); \
+	environ = export_env; \
+      } \
+    export_env[export_env_index++] = (do_alloc) ? savestring (envstr) : envstr; \
+    export_env[export_env_index] = (char *)NULL; \
+  } while (0)
+
+/* Add ASSIGN to EXPORT_ENV, or supersede a previous assignment in the
+   array with the same left-hand side.  Return the new EXPORT_ENV. */
+char **
+add_or_supercede_exported_var (assign, do_alloc)
+     char *assign;
+     int do_alloc;
+{
+  register int i;
+  int equal_offset;
+
+  equal_offset = assignment (assign, 0);
+  if (equal_offset == 0)
+    return (export_env);
+
+  /* If this is a function, then only supersede the function definition.
+     We do this by including the `=() {' in the comparison, like
+     initialize_shell_variables does. */
+  if (assign[equal_offset + 1] == '(' &&
+     strncmp (assign + equal_offset + 2, ") {", 3) == 0)		/* } */
+    equal_offset += 4;
+
+  for (i = 0; i < export_env_index; i++)
+    {
+      if (STREQN (assign, export_env[i], equal_offset + 1))
+	{
+	  free (export_env[i]);
+	  export_env[i] = do_alloc ? savestring (assign) : assign;
+	  return (export_env);
+	}
+    }
+  add_to_export_env (assign, do_alloc);
+  return (export_env);
+}
+
+static void
+add_temp_array_to_env (temp_array, do_alloc, do_supercede)
+     char **temp_array;
+     int do_alloc, do_supercede;
+{
+  register int i;
+
+  if (temp_array == 0)
+    return;
+
+  for (i = 0; temp_array[i]; i++)
+    {
+      if (do_supercede)
+	export_env = add_or_supercede_exported_var (temp_array[i], do_alloc);
+      else
+	add_to_export_env (temp_array[i], do_alloc);
+    }
+
+  free (temp_array);
+}
+
+/* Make the environment array for the command about to be executed, if the
+   array needs making.  Otherwise, do nothing.  If a shell action could
+   change the array that commands receive for their environment, then the
+   code should `array_needs_making++'.
+
+   The order to add to the array is:
+   	temporary_env
+   	list of var contexts whose head is shell_variables
+  	shell_functions
+
+  This is the shell variable lookup order.  We add only new variable
+  names at each step, which allows local variables and variables in
+  the temporary environments to shadow variables in the global (or
+  any previous) scope.
+*/
+
+static int
+n_shell_variables ()
+{
+  VAR_CONTEXT *vc;
+  int n;
+
+  for (n = 0, vc = shell_variables; vc; vc = vc->down)
+    n += HASH_ENTRIES (vc->table);
+  return n;
+}
+
+int
+chkexport (name)
+     char *name;
+{
+  SHELL_VAR *v;
+
+  v = find_variable (name);
+  if (v && exported_p (v))
+    {
+      array_needs_making = 1;
+      maybe_make_export_env ();
+      return 1;
+    }
+  return 0;
+}
+
+void
+maybe_make_export_env ()
+{
+  register char **temp_array;
+  int new_size;
+  VAR_CONTEXT *tcxt, *icxt;
+
+  if (array_needs_making)
+    {
+      if (export_env)
+	strvec_flush (export_env);
+
+      /* Make a guess based on how many shell variables and functions we
+	 have.  Since there will always be array variables, and array
+	 variables are not (yet) exported, this will always be big enough
+	 for the exported variables and functions. */
+      new_size = n_shell_variables () + HASH_ENTRIES (shell_functions) + 1 +
+		 HASH_ENTRIES (temporary_env) + HASH_ENTRIES (invalid_env);
+      if (new_size > export_env_size)
+	{
+	  export_env_size = new_size;
+	  export_env = strvec_resize (export_env, export_env_size);
+	  environ = export_env;
+	}
+      export_env[export_env_index = 0] = (char *)NULL;
+
+      /* Make a dummy variable context from the temporary_env, stick it on
+	 the front of shell_variables, call make_var_export_array on the
+	 whole thing to flatten it, and convert the list of SHELL_VAR *s
+	 to the form needed by the environment. */
+      if (temporary_env)
+	{
+	  tcxt = new_var_context ((char *)NULL, 0);
+	  tcxt->table = temporary_env;
+	  tcxt->down = shell_variables;
+	}
+      else
+	tcxt = shell_variables;
+
+      if (invalid_env)
+	{
+	  icxt = new_var_context ((char *)NULL, 0);
+	  icxt->table = invalid_env;
+	  icxt->down = tcxt;
+	}
+      else
+	icxt = tcxt;
+      
+      temp_array = make_var_export_array (icxt);
+      if (temp_array)
+	add_temp_array_to_env (temp_array, 0, 0);
+
+      if (icxt != tcxt)
+	free (icxt);
+
+      if (tcxt != shell_variables)
+	free (tcxt);
+
+#if defined (RESTRICTED_SHELL)
+      /* Restricted shells may not export shell functions. */
+      temp_array = restricted ? (char **)0 : make_func_export_array ();
+#else
+      temp_array = make_func_export_array ();
+#endif
+      if (temp_array)
+	add_temp_array_to_env (temp_array, 0, 0);
+
+      array_needs_making = 0;
+    }
+}
+
+/* This is an efficiency hack.  PWD and OLDPWD are auto-exported, so
+   we will need to remake the exported environment every time we
+   change directories.  `_' is always put into the environment for
+   every external command, so without special treatment it will always
+   cause the environment to be remade.
+
+   If there is no other reason to make the exported environment, we can
+   just update the variables in place and mark the exported environment
+   as no longer needing a remake. */
+void
+update_export_env_inplace (env_prefix, preflen, value)
+     char *env_prefix;
+     int preflen;
+     char *value;
+{
+  char *evar;
+
+  evar = (char *)xmalloc (STRLEN (value) + preflen + 1);
+  strcpy (evar, env_prefix);
+  if (value)
+    strcpy (evar + preflen, value);
+  export_env = add_or_supercede_exported_var (evar, 0);
+}
+
+/* We always put _ in the environment as the name of this command. */
+void
+put_command_name_into_env (command_name)
+     char *command_name;
+{
+  update_export_env_inplace ("_=", 2, command_name);
+}
+
+/* **************************************************************** */
+/*								    */
+/*		      Managing variable contexts		    */
+/*								    */
+/* **************************************************************** */
+
+/* Allocate and return a new variable context with NAME and FLAGS.
+   NAME can be NULL. */
+
+VAR_CONTEXT *
+new_var_context (name, flags)
+     char *name;
+     int flags;
+{
+  VAR_CONTEXT *vc;
+
+  vc = (VAR_CONTEXT *)xmalloc (sizeof (VAR_CONTEXT));
+  vc->name = name ? savestring (name) : (char *)NULL;
+  vc->scope = variable_context;
+  vc->flags = flags;
+
+  vc->up = vc->down = (VAR_CONTEXT *)NULL;
+  vc->table = (HASH_TABLE *)NULL;
+
+  return vc;
+}
+
+/* Free a variable context and its data, including the hash table.  Dispose
+   all of the variables. */
+void
+dispose_var_context (vc)
+     VAR_CONTEXT *vc;
+{
+  FREE (vc->name);
+
+  if (vc->table)
+    {
+      delete_all_variables (vc->table);
+      hash_dispose (vc->table);
+    }
+
+  free (vc);
+}
+
+/* Set VAR's scope level to the current variable context. */
+static int
+set_context (var)
+     SHELL_VAR *var;
+{
+  return (var->context = variable_context);
+}
+
+/* Make a new variable context with NAME and FLAGS and a HASH_TABLE of
+   temporary variables, and push it onto shell_variables.  This is
+   for shell functions. */
+VAR_CONTEXT *
+push_var_context (name, flags, tempvars)
+     char *name;
+     int flags;
+     HASH_TABLE *tempvars;
+{
+  VAR_CONTEXT *vc;
+  int posix_func_behavior;
+
+  /* As of IEEE Std 1003.1-2017, assignment statements preceding shell
+     functions no longer behave like assignment statements preceding
+     special builtins, and do not persist in the current shell environment.
+     This is austin group interp #654, though nobody implements it yet. */
+  posix_func_behavior = 0;
+
+  vc = new_var_context (name, flags);
+  /* Posix interp 1009, temporary assignments preceding function calls modify
+     the current environment *before* the command is executed. */
+  if (posix_func_behavior && (flags & VC_FUNCENV) && tempvars == temporary_env)
+    merge_temporary_env ();
+  else if (tempvars)
+    {
+      vc->table = tempvars;
+      /* Have to do this because the temp environment was created before
+	 variable_context was incremented. */
+      /* XXX - only need to do it if flags&VC_FUNCENV */
+      flatten (tempvars, set_context, (VARLIST *)NULL, 0);
+      vc->flags |= VC_HASTMPVAR;
+    }
+  vc->down = shell_variables;
+  shell_variables->up = vc;
+
+  return (shell_variables = vc);
+}
+
+/* This can be called from one of two code paths:
+	1. pop_scope, which implements the posix rules for propagating variable
+	   assignments preceding special builtins to the surrounding scope
+	   (push_builtin_var -- isbltin == 1);
+	2. pop_var_context, which is called from pop_context and implements the
+	   posix rules for propagating variable assignments preceding function
+	   calls to the surrounding scope (push_func_var -- isbltin == 0)
+
+  It takes variables out of a temporary environment hash table. We take the
+  variable in data.
+*/
+
+static inline void
+push_posix_tempvar_internal (var, isbltin)
+     SHELL_VAR *var;
+     int isbltin;
+{
+  SHELL_VAR *v;
+  int posix_var_behavior;
+
+  /* As of IEEE Std 1003.1-2017, assignment statements preceding shell
+     functions no longer behave like assignment statements preceding
+     special builtins, and do not persist in the current shell environment.
+     This is austin group interp #654, though nobody implements it yet. */
+  posix_var_behavior = posixly_correct && isbltin;
+  v = 0;
+
+  if (local_p (var) && STREQ (var->name, "-"))
+    {
+      set_current_options (value_cell (var));
+      set_shellopts ();
+    }
+  /* This takes variable assignments preceding special builtins that can execute
+     multiple commands (source, eval, etc.) and performs the equivalent of
+     an assignment statement to modify the closest enclosing variable (the
+     posix "current execution environment"). This makes the behavior the same
+     as push_posix_temp_var; but the circumstances of calling are slightly
+     different. */
+  else if (tempvar_p (var) && posix_var_behavior)
+    {
+      /* similar to push_posix_temp_var */
+      v = bind_variable (var->name, value_cell (var), ASS_FORCE|ASS_NOLONGJMP);
+      if (v)
+	{
+	  v->attributes |= var->attributes;
+	  if (v->context == 0)
+	    v->attributes &= ~(att_tempvar|att_propagate);
+	  /* XXX - set att_propagate here if v->context > 0? */
+	}
+    }
+  else if (tempvar_p (var) && propagate_p (var))
+    {
+      /* Make sure we have a hash table to store the variable in while it is
+	 being propagated down to the global variables table.  Create one if
+	 we have to */
+      if ((vc_isfuncenv (shell_variables) || vc_istempenv (shell_variables)) && shell_variables->table == 0)
+	shell_variables->table = hash_create (VARIABLES_HASH_BUCKETS);
+      v = bind_variable_internal (var->name, value_cell (var), shell_variables->table, 0, 0);
+      /* XXX - should we set v->context here? */
+      if (v)
+	v->context = shell_variables->scope;
+      if (shell_variables == global_variables)
+	var->attributes &= ~(att_tempvar|att_propagate);
+      else
+	shell_variables->flags |= VC_HASTMPVAR;
+      if (v)
+	v->attributes |= var->attributes;
+    }
+  else
+    stupidly_hack_special_variables (var->name);	/* XXX */
+
+#if defined (ARRAY_VARS)
+  if (v && (array_p (var) || assoc_p (var)))
+    {
+      FREE (value_cell (v));
+      if (array_p (var))
+	var_setarray (v, array_copy (array_cell (var)));
+      else
+	var_setassoc (v, assoc_copy (assoc_cell (var)));
+    }
+#endif	  
+
+  dispose_variable (var);
+}
+
+static void
+push_func_var (data)
+     PTR_T data;
+{
+  SHELL_VAR *var;
+
+  var = (SHELL_VAR *)data;
+  push_posix_tempvar_internal (var, 0);
+}
+
+static void
+push_builtin_var (data)
+     PTR_T data;
+{
+  SHELL_VAR *var;
+
+  var = (SHELL_VAR *)data;
+  push_posix_tempvar_internal (var, 1);
+}
+
+/* Pop the top context off of VCXT and dispose of it, returning the rest of
+   the stack. */
+void
+pop_var_context ()
+{
+  VAR_CONTEXT *ret, *vcxt;
+
+  vcxt = shell_variables;
+  if (vc_isfuncenv (vcxt) == 0)
+    {
+      internal_error (_("pop_var_context: head of shell_variables not a function context"));
+      return;
+    }
+
+  if (ret = vcxt->down)
+    {
+      ret->up = (VAR_CONTEXT *)NULL;
+      shell_variables = ret;
+      if (vcxt->table)
+	hash_flush (vcxt->table, push_func_var);
+      dispose_var_context (vcxt);
+    }
+  else
+    internal_error (_("pop_var_context: no global_variables context"));
+}
+
+/* Delete the HASH_TABLEs for all variable contexts beginning at VCXT, and
+   all of the VAR_CONTEXTs except GLOBAL_VARIABLES. */
+void
+delete_all_contexts (vcxt)
+     VAR_CONTEXT *vcxt;
+{
+  VAR_CONTEXT *v, *t;
+
+  for (v = vcxt; v != global_variables; v = t)
+    {
+      t = v->down;
+      dispose_var_context (v);
+    }    
+
+  delete_all_variables (global_variables->table);
+  shell_variables = global_variables;
+}
+
+/* **************************************************************** */
+/*								    */
+/*	   Pushing and Popping temporary variable scopes	    */
+/*								    */
+/* **************************************************************** */
+
+VAR_CONTEXT *
+push_scope (flags, tmpvars)
+     int flags;
+     HASH_TABLE *tmpvars;
+{
+  return (push_var_context ((char *)NULL, flags, tmpvars));
+}
+
+static void
+push_exported_var (data)
+     PTR_T data;
+{
+  SHELL_VAR *var, *v;
+
+  var = (SHELL_VAR *)data;
+
+  /* If a temp var had its export attribute set, or it's marked to be
+     propagated, bind it in the previous scope before disposing it. */
+  /* XXX - This isn't exactly right, because all tempenv variables have the
+    export attribute set. */
+  if (tempvar_p (var) && exported_p (var) && (var->attributes & att_propagate))
+    {
+      var->attributes &= ~att_tempvar;		/* XXX */
+      v = bind_variable_internal (var->name, value_cell (var), shell_variables->table, 0, 0);
+      if (shell_variables == global_variables)
+	var->attributes &= ~att_propagate;
+      if (v)
+	{
+	  v->attributes |= var->attributes;
+	  v->context = shell_variables->scope;
+	}
+    }
+  else
+    stupidly_hack_special_variables (var->name);	/* XXX */
+
+  dispose_variable (var);
+}
+
+/* This is called to propagate variables in the temporary environment of a
+   special builtin (if IS_SPECIAL != 0) or exported variables that are the
+   result of a builtin like `source' or `command' that can operate on the
+   variables in its temporary environment. In the first case, we call
+   push_builtin_var, which does the right thing. */
+void
+pop_scope (is_special)
+     int is_special;
+{
+  VAR_CONTEXT *vcxt, *ret;
+  int is_bltinenv;
+
+  vcxt = shell_variables;
+  if (vc_istempscope (vcxt) == 0)
+    {
+      internal_error (_("pop_scope: head of shell_variables not a temporary environment scope"));
+      return;
+    }
+  is_bltinenv = vc_isbltnenv (vcxt);	/* XXX - for later */
+
+  ret = vcxt->down;
+  if (ret)
+    ret->up = (VAR_CONTEXT *)NULL;
+
+  shell_variables = ret;
+
+  /* Now we can take care of merging variables in VCXT into set of scopes
+     whose head is RET (shell_variables). */
+  FREE (vcxt->name);
+  if (vcxt->table)
+    {
+      if (is_special)
+	hash_flush (vcxt->table, push_builtin_var);
+      else
+	hash_flush (vcxt->table, push_exported_var);
+      hash_dispose (vcxt->table);
+    }
+  free (vcxt);
+
+  sv_ifs ("IFS");	/* XXX here for now */
+}
+
+/* **************************************************************** */
+/*								    */
+/*		 Pushing and Popping function contexts		    */
+/*								    */
+/* **************************************************************** */
+
+struct saved_dollar_vars {
+  char **first_ten;
+  WORD_LIST *rest;
+  int count;
+};
+
+static struct saved_dollar_vars *dollar_arg_stack = (struct saved_dollar_vars *)NULL;
+static int dollar_arg_stack_slots;
+static int dollar_arg_stack_index;
+
+/* Functions to manipulate dollar_vars array. Need to keep these in sync with
+   whatever remember_args() does. */
+static char **
+save_dollar_vars ()
+{
+  char **ret;
+  int i;
+
+  ret = strvec_create (10);
+  for (i = 1; i < 10; i++)
+    {
+      ret[i] = dollar_vars[i];
+      dollar_vars[i] = (char *)NULL;
+    }
+  return ret;
+}
+
+static void
+restore_dollar_vars (args)
+     char **args;
+{
+  int i;
+
+  for (i = 1; i < 10; i++)
+    dollar_vars[i] = args[i];
+}
+
+static void
+free_dollar_vars ()
+{
+  int i;
+
+  for (i = 1; i < 10; i++)
+    {
+      FREE (dollar_vars[i]);
+      dollar_vars[i] = (char *)NULL;
+    }
+}
+
+static void
+free_saved_dollar_vars (args)
+     char **args;
+{
+  int i;
+
+  for (i = 1; i < 10; i++)
+    FREE (args[i]);
+}
+
+/* Do what remember_args (xxx, 1) would have done. */
+void
+clear_dollar_vars ()
+{
+  free_dollar_vars ();
+  dispose_words (rest_of_args);
+
+  rest_of_args = (WORD_LIST *)NULL;
+  posparam_count = 0;
+}
+
+/* XXX - should always be followed by remember_args () */
+void
+push_context (name, is_subshell, tempvars)
+     char *name;	/* function name */
+     int is_subshell;
+     HASH_TABLE *tempvars;
+{
+  if (is_subshell == 0)
+    push_dollar_vars ();
+  variable_context++;
+  push_var_context (name, VC_FUNCENV, tempvars);
+}
+
+/* Only called when subshell == 0, so we don't need to check, and can
+   unconditionally pop the dollar vars off the stack. */
+void
+pop_context ()
+{
+  pop_dollar_vars ();
+  variable_context--;
+  pop_var_context ();
+
+  sv_ifs ("IFS");		/* XXX here for now */
+}
+
+/* Save the existing positional parameters on a stack. */
+void
+push_dollar_vars ()
+{
+  if (dollar_arg_stack_index + 2 > dollar_arg_stack_slots)
+    {
+      dollar_arg_stack = (struct saved_dollar_vars *)
+	xrealloc (dollar_arg_stack, (dollar_arg_stack_slots += 10)
+		  * sizeof (struct saved_dollar_vars));
+    }
+
+  dollar_arg_stack[dollar_arg_stack_index].count = posparam_count;
+  dollar_arg_stack[dollar_arg_stack_index].first_ten = save_dollar_vars ();
+  dollar_arg_stack[dollar_arg_stack_index++].rest = rest_of_args;
+  rest_of_args = (WORD_LIST *)NULL;
+  posparam_count = 0;
+  
+  dollar_arg_stack[dollar_arg_stack_index].first_ten = (char **)NULL;
+  dollar_arg_stack[dollar_arg_stack_index].rest = (WORD_LIST *)NULL;  
+}
+
+/* Restore the positional parameters from our stack. */
+void
+pop_dollar_vars ()
+{
+  if (dollar_arg_stack == 0 || dollar_arg_stack_index == 0)
+    return;
+
+  /* Wipe out current values */
+  clear_dollar_vars ();
+
+  rest_of_args = dollar_arg_stack[--dollar_arg_stack_index].rest;
+  restore_dollar_vars (dollar_arg_stack[dollar_arg_stack_index].first_ten);
+  free (dollar_arg_stack[dollar_arg_stack_index].first_ten);
+  posparam_count = dollar_arg_stack[dollar_arg_stack_index].count;
+
+  dollar_arg_stack[dollar_arg_stack_index].first_ten = (char **)NULL;
+  dollar_arg_stack[dollar_arg_stack_index].rest = (WORD_LIST *)NULL;
+  dollar_arg_stack[dollar_arg_stack_index].count = 0;
+
+  set_dollar_vars_unchanged ();
+  invalidate_cached_quoted_dollar_at ();
+}
+
+void
+dispose_saved_dollar_vars ()
+{
+  if (dollar_arg_stack == 0 || dollar_arg_stack_index == 0)
+    return;
+
+  dispose_words (dollar_arg_stack[--dollar_arg_stack_index].rest);    
+  free_saved_dollar_vars (dollar_arg_stack[dollar_arg_stack_index].first_ten);	
+  free (dollar_arg_stack[dollar_arg_stack_index].first_ten);
+
+  dollar_arg_stack[dollar_arg_stack_index].first_ten = (char **)NULL;  
+  dollar_arg_stack[dollar_arg_stack_index].rest = (WORD_LIST *)NULL;
+  dollar_arg_stack[dollar_arg_stack_index].count = 0;
+}
+
+/* Initialize BASH_ARGV and BASH_ARGC after turning on extdebug after the
+   shell is initialized */
+void
+init_bash_argv ()
+{
+  if (bash_argv_initialized == 0)
+    {
+      save_bash_argv ();
+      bash_argv_initialized = 1;
+    }
+}
+
+void
+save_bash_argv ()
+{
+  WORD_LIST *list;
+
+  list = list_rest_of_args ();
+  push_args (list);
+  dispose_words (list);
+}
+
+/* Manipulate the special BASH_ARGV and BASH_ARGC variables. */
+
+void
+push_args (list)
+     WORD_LIST *list;
+{
+#if defined (ARRAY_VARS) && defined (DEBUGGER)
+  SHELL_VAR *bash_argv_v, *bash_argc_v;
+  ARRAY *bash_argv_a, *bash_argc_a;
+  WORD_LIST *l;
+  arrayind_t i;
+  char *t;
+
+  GET_ARRAY_FROM_VAR ("BASH_ARGV", bash_argv_v, bash_argv_a);
+  GET_ARRAY_FROM_VAR ("BASH_ARGC", bash_argc_v, bash_argc_a);
+
+  for (l = list, i = 0; l; l = l->next, i++)
+    array_push (bash_argv_a, l->word->word);
+
+  t = itos (i);
+  array_push (bash_argc_a, t);
+  free (t);
+#endif /* ARRAY_VARS && DEBUGGER */
+}
+
+/* Remove arguments from BASH_ARGV array.  Pop top element off BASH_ARGC
+   array and use that value as the count of elements to remove from
+   BASH_ARGV. */
+void
+pop_args ()
+{
+#if defined (ARRAY_VARS) && defined (DEBUGGER)
+  SHELL_VAR *bash_argv_v, *bash_argc_v;
+  ARRAY *bash_argv_a, *bash_argc_a;
+  ARRAY_ELEMENT *ce;
+  intmax_t i;
+
+  GET_ARRAY_FROM_VAR ("BASH_ARGV", bash_argv_v, bash_argv_a);
+  GET_ARRAY_FROM_VAR ("BASH_ARGC", bash_argc_v, bash_argc_a);
+
+  ce = array_shift (bash_argc_a, 1, 0);
+  if (ce == 0 || legal_number (element_value (ce), &i) == 0)
+    i = 0;
+
+  for ( ; i > 0; i--)
+    array_pop (bash_argv_a);
+  array_dispose_element (ce);
+#endif /* ARRAY_VARS && DEBUGGER */
+}
+
+/*************************************************
+ *						 *
+ *	Functions to manage special variables	 *
+ *						 *
+ *************************************************/
+
+/* Extern declarations for variables this code has to manage. */
+
+/* An alist of name.function for each special variable.  Most of the
+   functions don't do much, and in fact, this would be faster with a
+   switch statement, but by the end of this file, I am sick of switch
+   statements. */
+
+#define SET_INT_VAR(name, intvar)  intvar = find_variable (name) != 0
+
+/* This table will be sorted with qsort() the first time it's accessed. */
+struct name_and_function {
+  char *name;
+  sh_sv_func_t *function;
+};
+
+static struct name_and_function special_vars[] = {
+  { "BASH_COMPAT", sv_shcompat },
+  { "BASH_XTRACEFD", sv_xtracefd },
+
+#if defined (JOB_CONTROL)
+  { "CHILD_MAX", sv_childmax },
+#endif
+
+#if defined (READLINE)
+#  if defined (STRICT_POSIX)
+  { "COLUMNS", sv_winsize },
+#  endif
+  { "COMP_WORDBREAKS", sv_comp_wordbreaks },
+#endif
+
+  { "EXECIGNORE", sv_execignore },
+
+  { "FUNCNEST", sv_funcnest },
+
+  { "GLOBIGNORE", sv_globignore },
+
+#if defined (HISTORY)
+  { "HISTCONTROL", sv_history_control },
+  { "HISTFILESIZE", sv_histsize },
+  { "HISTIGNORE", sv_histignore },
+  { "HISTSIZE", sv_histsize },
+  { "HISTTIMEFORMAT", sv_histtimefmt },
+#endif
+
+#if defined (__CYGWIN__)
+  { "HOME", sv_home },
+#endif
+
+#if defined (READLINE)
+  { "HOSTFILE", sv_hostfile },
+#endif
+
+  { "IFS", sv_ifs },
+  { "IGNOREEOF", sv_ignoreeof },
+
+  { "LANG", sv_locale },
+  { "LC_ALL", sv_locale },
+  { "LC_COLLATE", sv_locale },
+  { "LC_CTYPE", sv_locale },
+  { "LC_MESSAGES", sv_locale },
+  { "LC_NUMERIC", sv_locale },
+  { "LC_TIME", sv_locale },
+
+#if defined (READLINE) && defined (STRICT_POSIX)
+  { "LINES", sv_winsize },
+#endif
+
+  { "MAIL", sv_mail },
+  { "MAILCHECK", sv_mail },
+  { "MAILPATH", sv_mail },
+
+  { "OPTERR", sv_opterr },
+  { "OPTIND", sv_optind },
+
+  { "PATH", sv_path },
+  { "POSIXLY_CORRECT", sv_strict_posix },
+
+#if defined (READLINE)
+  { "TERM", sv_terminal },
+  { "TERMCAP", sv_terminal },
+  { "TERMINFO", sv_terminal },
+#endif /* READLINE */
+
+  { "TEXTDOMAIN", sv_locale },
+  { "TEXTDOMAINDIR", sv_locale },
+
+#if defined (HAVE_TZSET)
+  { "TZ", sv_tz },
+#endif
+
+#if defined (HISTORY) && defined (BANG_HISTORY)
+  { "histchars", sv_histchars },
+#endif /* HISTORY && BANG_HISTORY */
+
+  { "ignoreeof", sv_ignoreeof },
+
+  { (char *)0, (sh_sv_func_t *)0 }
+};
+
+#define N_SPECIAL_VARS	(sizeof (special_vars) / sizeof (special_vars[0]) - 1)
+
+static int
+sv_compare (sv1, sv2)
+     struct name_and_function *sv1, *sv2;
+{
+  int r;
+
+  if ((r = sv1->name[0] - sv2->name[0]) == 0)
+    r = strcmp (sv1->name, sv2->name);
+  return r;
+}
+
+static inline int
+find_special_var (name)
+     const char *name;
+{
+  register int i, r;
+
+  for (i = 0; special_vars[i].name; i++)
+    {
+      r = special_vars[i].name[0] - name[0];
+      if (r == 0)
+	r = strcmp (special_vars[i].name, name);
+      if (r == 0)
+	return i;
+      else if (r > 0)
+	/* Can't match any of rest of elements in sorted list.  Take this out
+	   if it causes problems in certain environments. */
+	break;
+    }
+  return -1;
+}
+
+/* The variable in NAME has just had its state changed.  Check to see if it
+   is one of the special ones where something special happens. */
+void
+stupidly_hack_special_variables (name)
+     char *name;
+{
+  static int sv_sorted = 0;
+  int i;
+
+  if (sv_sorted == 0)	/* shouldn't need, but it's fairly cheap. */
+    {
+      qsort (special_vars, N_SPECIAL_VARS, sizeof (special_vars[0]),
+		(QSFUNC *)sv_compare);
+      sv_sorted = 1;
+    }
+
+  i = find_special_var (name);
+  if (i != -1)
+    (*(special_vars[i].function)) (name);
+}
+
+/* Special variables that need hooks to be run when they are unset as part
+   of shell reinitialization should have their sv_ functions run here. */
+void
+reinit_special_variables ()
+{
+#if defined (READLINE)
+  sv_comp_wordbreaks ("COMP_WORDBREAKS");
+#endif
+  sv_globignore ("GLOBIGNORE");
+  sv_opterr ("OPTERR");
+}
+
+void
+sv_ifs (name)
+     char *name;
+{
+  SHELL_VAR *v;
+
+  v = find_variable ("IFS");
+  setifs (v);
+}
+
+/* What to do just after the PATH variable has changed. */
+void
+sv_path (name)
+     char *name;
+{
+  /* hash -r */
+  phash_flush ();
+}
+
+/* What to do just after one of the MAILxxxx variables has changed.  NAME
+   is the name of the variable.  This is called with NAME set to one of
+   MAIL, MAILCHECK, or MAILPATH.  */
+void
+sv_mail (name)
+     char *name;
+{
+  /* If the time interval for checking the files has changed, then
+     reset the mail timer.  Otherwise, one of the pathname vars
+     to the users mailbox has changed, so rebuild the array of
+     filenames. */
+  if (name[4] == 'C')  /* if (strcmp (name, "MAILCHECK") == 0) */
+    reset_mail_timer ();
+  else
+    {
+      free_mail_files ();
+      remember_mail_dates ();
+    }
+}
+
+void
+sv_funcnest (name)
+     char *name;
+{
+  SHELL_VAR *v;
+  intmax_t num;
+
+  v = find_variable (name);
+  if (v == 0)
+    funcnest_max = 0;
+  else if (legal_number (value_cell (v), &num) == 0)
+    funcnest_max = 0;
+  else
+    funcnest_max = num;
+}
+
+/* What to do when EXECIGNORE changes. */
+void
+sv_execignore (name)
+     char *name;
+{
+  setup_exec_ignore (name);
+}
+
+/* What to do when GLOBIGNORE changes. */
+void
+sv_globignore (name)
+     char *name;
+{
+  if (privileged_mode == 0)
+    setup_glob_ignore (name);
+}
+
+#if defined (READLINE)
+void
+sv_comp_wordbreaks (name)
+     char *name;
+{
+  SHELL_VAR *sv;
+
+  sv = find_variable (name);
+  if (sv == 0)
+    reset_completer_word_break_chars ();
+}
+
+/* What to do just after one of the TERMxxx variables has changed.
+   If we are an interactive shell, then try to reset the terminal
+   information in readline. */
+void
+sv_terminal (name)
+     char *name;
+{
+  if (interactive_shell && no_line_editing == 0)
+    rl_reset_terminal (get_string_value ("TERM"));
+}
+
+void
+sv_hostfile (name)
+     char *name;
+{
+  SHELL_VAR *v;
+
+  v = find_variable (name);
+  if (v == 0)
+    clear_hostname_list ();
+  else
+    hostname_list_initialized = 0;
+}
+
+#if defined (STRICT_POSIX)
+/* In strict posix mode, we allow assignments to LINES and COLUMNS (and values
+   found in the initial environment) to override the terminal size reported by
+   the kernel. */
+void
+sv_winsize (name)
+     char *name;
+{
+  SHELL_VAR *v;
+  intmax_t xd;
+  int d;
+
+  if (posixly_correct == 0 || interactive_shell == 0 || no_line_editing)
+    return;
+
+  v = find_variable (name);
+  if (v == 0 || var_isset (v) == 0)
+    rl_reset_screen_size ();
+  else
+    {
+      if (legal_number (value_cell (v), &xd) == 0)
+	return;
+      winsize_assignment = 1;
+      d = xd;			/* truncate */
+      if (name[0] == 'L')	/* LINES */
+	rl_set_screen_size (d, -1);
+      else			/* COLUMNS */
+	rl_set_screen_size (-1, d);
+      winsize_assignment = 0;
+    }
+}
+#endif /* STRICT_POSIX */
+#endif /* READLINE */
+
+/* Update the value of HOME in the export environment so tilde expansion will
+   work on cygwin. */
+#if defined (__CYGWIN__)
+sv_home (name)
+     char *name;
+{
+  array_needs_making = 1;
+  maybe_make_export_env ();
+}
+#endif
+
+#if defined (HISTORY)
+/* What to do after the HISTSIZE or HISTFILESIZE variables change.
+   If there is a value for this HISTSIZE (and it is numeric), then stifle
+   the history.  Otherwise, if there is NO value for this variable,
+   unstifle the history.  If name is HISTFILESIZE, and its value is
+   numeric, truncate the history file to hold no more than that many
+   lines. */
+void
+sv_histsize (name)
+     char *name;
+{
+  char *temp;
+  intmax_t num;
+  int hmax;
+
+  temp = get_string_value (name);
+
+  if (temp && *temp)
+    {
+      if (legal_number (temp, &num))
+	{
+	  hmax = num;
+	  if (hmax < 0 && name[4] == 'S')
+	    unstifle_history ();	/* unstifle history if HISTSIZE < 0 */
+	  else if (name[4] == 'S')
+	    {
+	      stifle_history (hmax);
+	      hmax = where_history ();
+	      if (history_lines_this_session > hmax)
+		history_lines_this_session = hmax;
+	    }
+	  else if (hmax >= 0)	/* truncate HISTFILE if HISTFILESIZE >= 0 */
+	    {
+	      history_truncate_file (get_string_value ("HISTFILE"), hmax);
+	      /* If we just shrank the history file to fewer lines than we've
+		 already read, make sure we adjust our idea of how many lines
+		 we have read from the file. */
+	      if (hmax < history_lines_in_file)
+		history_lines_in_file = hmax;
+	    }
+	}
+    }
+  else if (name[4] == 'S')
+    unstifle_history ();
+}
+
+/* What to do after the HISTIGNORE variable changes. */
+void
+sv_histignore (name)
+     char *name;
+{
+  setup_history_ignore (name);
+}
+
+/* What to do after the HISTCONTROL variable changes. */
+void
+sv_history_control (name)
+     char *name;
+{
+  char *temp;
+  char *val;
+  int tptr;
+
+  history_control = 0;
+  temp = get_string_value (name);
+
+  if (temp == 0 || *temp == 0)
+    return;
+
+  tptr = 0;
+  while (val = extract_colon_unit (temp, &tptr))
+    {
+      if (STREQ (val, "ignorespace"))
+	history_control |= HC_IGNSPACE;
+      else if (STREQ (val, "ignoredups"))
+	history_control |= HC_IGNDUPS;
+      else if (STREQ (val, "ignoreboth"))
+	history_control |= HC_IGNBOTH;
+      else if (STREQ (val, "erasedups"))
+	history_control |= HC_ERASEDUPS;
+
+      free (val);
+    }
+}
+
+#if defined (BANG_HISTORY)
+/* Setting/unsetting of the history expansion character. */
+void
+sv_histchars (name)
+     char *name;
+{
+  char *temp;
+
+  temp = get_string_value (name);
+  if (temp)
+    {
+      history_expansion_char = *temp;
+      if (temp[0] && temp[1])
+	{
+	  history_subst_char = temp[1];
+	  if (temp[2])
+	      history_comment_char = temp[2];
+	}
+    }
+  else
+    {
+      history_expansion_char = '!';
+      history_subst_char = '^';
+      history_comment_char = '#';
+    }
+}
+#endif /* BANG_HISTORY */
+
+void
+sv_histtimefmt (name)
+     char *name;
+{
+  SHELL_VAR *v;
+
+  if (v = find_variable (name))
+    {
+      if (history_comment_char == 0)
+	history_comment_char = '#';
+    }
+  history_write_timestamps = (v != 0);
+}
+#endif /* HISTORY */
+
+#if defined (HAVE_TZSET)
+void
+sv_tz (name)
+     char *name;
+{
+  SHELL_VAR *v;
+
+  v = find_variable (name);
+  if (v && exported_p (v))
+    array_needs_making = 1;
+  else if (v == 0)
+    array_needs_making = 1;
+
+  if (array_needs_making)
+    {
+      maybe_make_export_env ();  
+      tzset ();
+    }
+}
+#endif
+
+/* If the variable exists, then the value of it can be the number
+   of times we actually ignore the EOF.  The default is small,
+   (smaller than csh, anyway). */
+void
+sv_ignoreeof (name)
+     char *name;
+{
+  SHELL_VAR *tmp_var;
+  char *temp;
+
+  eof_encountered = 0;
+
+  tmp_var = find_variable (name);
+  ignoreeof = tmp_var && var_isset (tmp_var);
+  temp = tmp_var ? value_cell (tmp_var) : (char *)NULL;
+  if (temp)
+    eof_encountered_limit = (*temp && all_digits (temp)) ? atoi (temp) : 10;
+  set_shellopts ();	/* make sure `ignoreeof' is/is not in $SHELLOPTS */
+}
+
+void
+sv_optind (name)
+     char *name;
+{
+  SHELL_VAR *var;
+  char *tt;
+  int s;
+
+  var = find_variable ("OPTIND");
+  tt = var ? get_variable_value (var) : (char *)NULL;
+
+  /* Assume that if var->context < variable_context and variable_context > 0
+     then we are restoring the variables's previous state while returning
+     from a function. */
+  if (tt && *tt)
+    {
+      s = atoi (tt);
+
+      /* According to POSIX, setting OPTIND=1 resets the internal state
+	 of getopt (). */
+      if (s < 0 || s == 1)
+	s = 0;
+    }
+  else
+    s = 0;
+  getopts_reset (s);
+}
+
+void
+sv_opterr (name)
+     char *name;
+{
+  char *tt;
+
+  tt = get_string_value ("OPTERR");
+  sh_opterr = (tt && *tt) ? atoi (tt) : 1;
+}
+
+void
+sv_strict_posix (name)
+     char *name;
+{
+  SHELL_VAR *var;
+
+  var = find_variable (name);
+  posixly_correct = var && var_isset (var);
+  posix_initialize (posixly_correct);
+#if defined (READLINE)
+  if (interactive_shell)
+    posix_readline_initialize (posixly_correct);
+#endif /* READLINE */
+  set_shellopts ();	/* make sure `posix' is/is not in $SHELLOPTS */
+}
+
+void
+sv_locale (name)
+     char *name;
+{
+  char *v;
+  int r;
+
+  v = get_string_value (name);
+  if (name[0] == 'L' && name[1] == 'A')	/* LANG */
+    r = set_lang (name, v);
+  else
+    r = set_locale_var (name, v);		/* LC_*, TEXTDOMAIN* */
+
+#if 1
+  if (r == 0 && posixly_correct)
+    set_exit_status (EXECUTION_FAILURE);
+#endif
+}
+
+#if defined (ARRAY_VARS)
+void
+set_pipestatus_array (ps, nproc)
+     int *ps;
+     int nproc;
+{
+  SHELL_VAR *v;
+  ARRAY *a;
+  ARRAY_ELEMENT *ae;
+  register int i;
+  char *t, tbuf[INT_STRLEN_BOUND(int) + 1];
+
+  v = find_variable ("PIPESTATUS");
+  if (v == 0)
+    v = make_new_array_variable ("PIPESTATUS");
+  if (array_p (v) == 0)
+    return;		/* Do nothing if not an array variable. */
+  a = array_cell (v);
+
+  if (a == 0 || array_num_elements (a) == 0)
+    {
+      for (i = 0; i < nproc; i++)	/* was ps[i] != -1, not i < nproc */
+	{
+	  t = inttostr (ps[i], tbuf, sizeof (tbuf));
+	  array_insert (a, i, t);
+	}
+      return;
+    }
+
+  /* Fast case */
+  if (array_num_elements (a) == nproc && nproc == 1)
+    {
+      ae = element_forw (a->head);
+      free (element_value (ae));
+      set_element_value (ae, itos (ps[0]));
+    }
+  else if (array_num_elements (a) <= nproc)
+    {
+      /* modify in array_num_elements members in place, then add */
+      ae = a->head;
+      for (i = 0; i < array_num_elements (a); i++)
+	{
+	  ae = element_forw (ae);
+	  free (element_value (ae));
+	  set_element_value (ae, itos (ps[i]));
+	}
+      /* add any more */
+      for ( ; i < nproc; i++)
+	{
+	  t = inttostr (ps[i], tbuf, sizeof (tbuf));
+	  array_insert (a, i, t);
+	}
+    }
+  else
+    {
+      /* deleting elements.  it's faster to rebuild the array. */	  
+      array_flush (a);
+      for (i = 0; ps[i] != -1; i++)
+	{
+	  t = inttostr (ps[i], tbuf, sizeof (tbuf));
+	  array_insert (a, i, t);
+	}
+    }
+}
+
+ARRAY *
+save_pipestatus_array ()
+{
+  SHELL_VAR *v;
+  ARRAY *a;
+
+  v = find_variable ("PIPESTATUS");
+  if (v == 0 || array_p (v) == 0 || array_cell (v) == 0)
+    return ((ARRAY *)NULL);
+    
+  a = array_copy (array_cell (v));
+
+  return a;
+}
+
+void
+restore_pipestatus_array (a)
+     ARRAY *a;
+{
+  SHELL_VAR *v;
+  ARRAY *a2;
+
+  v = find_variable ("PIPESTATUS");
+  /* XXX - should we still assign even if existing value is NULL? */
+  if (v == 0 || array_p (v) == 0 || array_cell (v) == 0)
+    return;
+
+  a2 = array_cell (v);
+  var_setarray (v, a); 
+
+  array_dispose (a2);
+}
+#endif
+
+void
+set_pipestatus_from_exit (s)
+     int s;
+{
+#if defined (ARRAY_VARS)
+  static int v[2] = { 0, -1 };
+
+  v[0] = s;
+  set_pipestatus_array (v, 1);
+#endif
+}
+
+void
+sv_xtracefd (name)
+     char *name;
+{
+  SHELL_VAR *v;
+  char *t, *e;
+  int fd;
+  FILE *fp;
+
+  v = find_variable (name);
+  if (v == 0)
+    {
+      xtrace_reset ();
+      return;
+    }
+
+  t = value_cell (v);
+  if (t == 0 || *t == 0)
+    xtrace_reset ();
+  else
+    {
+      fd = (int)strtol (t, &e, 10);
+      if (e != t && *e == '\0' && sh_validfd (fd))
+	{
+	  fp = fdopen (fd, "w");
+	  if (fp == 0)
+	    internal_error (_("%s: %s: cannot open as FILE"), name, value_cell (v));
+	  else
+	    xtrace_set (fd, fp);
+	}
+      else
+	internal_error (_("%s: %s: invalid value for trace file descriptor"), name, value_cell (v));
+    }
+}
+
+#define MIN_COMPAT_LEVEL 31
+
+void
+sv_shcompat (name)
+     char *name;
+{
+  SHELL_VAR *v;
+  char *val;
+  int tens, ones, compatval;
+
+  v = find_variable (name);
+  if (v == 0)
+    {
+      shell_compatibility_level = DEFAULT_COMPAT_LEVEL;
+      set_compatibility_opts ();
+      return;
+    }
+  val = value_cell (v);
+  if (val == 0 || *val == '\0')
+    {
+      shell_compatibility_level = DEFAULT_COMPAT_LEVEL;
+      set_compatibility_opts ();
+      return;
+    }
+  /* Handle decimal-like compatibility version specifications: 4.2 */
+  if (ISDIGIT (val[0]) && val[1] == '.' && ISDIGIT (val[2]) && val[3] == 0)
+    {
+      tens = val[0] - '0';
+      ones = val[2] - '0';
+      compatval = tens*10 + ones;
+    }
+  /* Handle integer-like compatibility version specifications: 42 */
+  else if (ISDIGIT (val[0]) && ISDIGIT (val[1]) && val[2] == 0)
+    {
+      tens = val[0] - '0';
+      ones = val[1] - '0';
+      compatval = tens*10 + ones;
+    }
+  else
+    {
+compat_error:
+      internal_error (_("%s: %s: compatibility value out of range"), name, val);
+      shell_compatibility_level = DEFAULT_COMPAT_LEVEL;
+      set_compatibility_opts ();
+      return;
+    }
+
+  if (compatval < MIN_COMPAT_LEVEL || compatval > DEFAULT_COMPAT_LEVEL)
+    goto compat_error;
+
+  shell_compatibility_level = compatval;
+  set_compatibility_opts ();
+}
+
+#if defined (JOB_CONTROL)
+void
+sv_childmax (name)
+     char *name;
+{
+  char *tt;
+  int s;
+
+  tt = get_string_value (name);
+  s = (tt && *tt) ? atoi (tt) : 0;
+  set_maxchild (s);
+}
+#endif
diff --git a/variables.h b/variables.h
new file mode 100644
index 0000000..c73eb4e
--- /dev/null
+++ b/variables.h
@@ -0,0 +1,458 @@
+/* variables.h -- data structures for shell variables. */
+
+/* Copyright (C) 1987-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_VARIABLES_H_)
+#define _VARIABLES_H_
+
+#include "stdc.h"
+#include "array.h"
+#include "assoc.h"
+
+/* Shell variables and functions are stored in hash tables. */
+#include "hashlib.h"
+
+#include "conftypes.h"
+
+/* A variable context. */
+typedef struct var_context {
+  char *name;		/* empty or NULL means global context */
+  int scope;		/* 0 means global context */
+  int flags;
+  struct var_context *up;	/* previous function calls */
+  struct var_context *down;	/* down towards global context */
+  HASH_TABLE *table;		/* variables at this scope */
+} VAR_CONTEXT;
+
+/* Flags for var_context->flags */
+#define VC_HASLOCAL	0x01
+#define VC_HASTMPVAR	0x02
+#define VC_FUNCENV	0x04	/* also function if name != NULL */
+#define VC_BLTNENV	0x08	/* builtin_env */
+#define VC_TEMPENV	0x10	/* temporary_env */
+
+#define VC_TEMPFLAGS	(VC_FUNCENV|VC_BLTNENV|VC_TEMPENV)
+
+/* Accessing macros */
+#define vc_isfuncenv(vc)	(((vc)->flags & VC_FUNCENV) != 0)
+#define vc_isbltnenv(vc)	(((vc)->flags & VC_BLTNENV) != 0)
+#define vc_istempenv(vc)	(((vc)->flags & (VC_TEMPFLAGS)) == VC_TEMPENV)
+
+#define vc_istempscope(vc)	(((vc)->flags & (VC_TEMPENV|VC_BLTNENV)) != 0)
+
+#define vc_haslocals(vc)	(((vc)->flags & VC_HASLOCAL) != 0)
+#define vc_hastmpvars(vc)	(((vc)->flags & VC_HASTMPVAR) != 0)
+
+/* What a shell variable looks like. */
+
+typedef struct variable *sh_var_value_func_t PARAMS((struct variable *));
+typedef struct variable *sh_var_assign_func_t PARAMS((struct variable *, char *, arrayind_t, char *));
+
+/* For the future */
+union _value {
+  char *s;			/* string value */
+  intmax_t i;			/* int value */
+  COMMAND *f;			/* function */
+  ARRAY *a;			/* array */
+  HASH_TABLE *h;		/* associative array */
+  double d;			/* floating point number */
+#if defined (HAVE_LONG_DOUBLE)
+  long double ld;		/* long double */
+#endif
+  struct variable *v;		/* possible indirect variable use */
+  void *opaque;			/* opaque data for future use */
+};
+
+typedef struct variable {
+  char *name;			/* Symbol that the user types. */
+  char *value;			/* Value that is returned. */
+  char *exportstr;		/* String for the environment. */
+  sh_var_value_func_t *dynamic_value;	/* Function called to return a `dynamic'
+				   value for a variable, like $SECONDS
+				   or $RANDOM. */
+  sh_var_assign_func_t *assign_func; /* Function called when this `special
+				   variable' is assigned a value in
+				   bind_variable. */
+  int attributes;		/* export, readonly, array, invisible... */
+  int context;			/* Which context this variable belongs to. */
+} SHELL_VAR;
+
+typedef struct _vlist {
+  SHELL_VAR **list;
+  int list_size;	/* allocated size */
+  int list_len;		/* current number of entries */
+} VARLIST;
+
+/* The various attributes that a given variable can have. */
+/* First, the user-visible attributes */
+#define att_exported	0x0000001	/* export to environment */
+#define att_readonly	0x0000002	/* cannot change */
+#define att_array	0x0000004	/* value is an array */
+#define att_function	0x0000008	/* value is a function */
+#define att_integer	0x0000010	/* internal representation is int */
+#define att_local	0x0000020	/* variable is local to a function */
+#define att_assoc	0x0000040	/* variable is an associative array */
+#define att_trace	0x0000080	/* function is traced with DEBUG trap */
+#define att_uppercase	0x0000100	/* word converted to uppercase on assignment */
+#define att_lowercase	0x0000200	/* word converted to lowercase on assignment */
+#define att_capcase	0x0000400	/* word capitalized on assignment */
+#define att_nameref	0x0000800	/* word is a name reference */
+
+#define user_attrs	(att_exported|att_readonly|att_integer|att_local|att_trace|att_uppercase|att_lowercase|att_capcase|att_nameref)
+
+#define attmask_user	0x0000fff
+
+/* Internal attributes used for bookkeeping */
+#define att_invisible	0x0001000	/* cannot see */
+#define att_nounset	0x0002000	/* cannot unset */
+#define att_noassign	0x0004000	/* assignment not allowed */
+#define att_imported	0x0008000	/* came from environment */
+#define att_special	0x0010000	/* requires special handling */
+#define att_nofree	0x0020000	/* do not free value on unset */
+#define att_regenerate	0x0040000	/* regenerate when exported */
+
+#define	attmask_int	0x00ff000
+
+/* Internal attributes used for variable scoping. */
+#define att_tempvar	0x0100000	/* variable came from the temp environment */
+#define att_propagate	0x0200000	/* propagate to previous scope */
+
+#define attmask_scope	0x0f00000
+
+#define exported_p(var)		((((var)->attributes) & (att_exported)))
+#define readonly_p(var)		((((var)->attributes) & (att_readonly)))
+#define array_p(var)		((((var)->attributes) & (att_array)))
+#define function_p(var)		((((var)->attributes) & (att_function)))
+#define integer_p(var)		((((var)->attributes) & (att_integer)))
+#define local_p(var)		((((var)->attributes) & (att_local)))
+#define assoc_p(var)		((((var)->attributes) & (att_assoc)))
+#define trace_p(var)		((((var)->attributes) & (att_trace)))
+#define uppercase_p(var)	((((var)->attributes) & (att_uppercase)))
+#define lowercase_p(var)	((((var)->attributes) & (att_lowercase)))
+#define capcase_p(var)		((((var)->attributes) & (att_capcase)))
+#define nameref_p(var)		((((var)->attributes) & (att_nameref)))
+
+#define invisible_p(var)	((((var)->attributes) & (att_invisible)))
+#define non_unsettable_p(var)	((((var)->attributes) & (att_nounset)))
+#define noassign_p(var)		((((var)->attributes) & (att_noassign)))
+#define imported_p(var)		((((var)->attributes) & (att_imported)))
+#define specialvar_p(var)	((((var)->attributes) & (att_special)))
+#define nofree_p(var)		((((var)->attributes) & (att_nofree)))
+#define regen_p(var)		((((var)->attributes) & (att_regenerate)))
+
+#define tempvar_p(var)		((((var)->attributes) & (att_tempvar)))
+#define propagate_p(var)	((((var)->attributes) & (att_propagate)))
+
+/* Variable names: lvalues */
+#define name_cell(var)		((var)->name)
+
+/* Accessing variable values: rvalues */
+#define value_cell(var)		((var)->value)
+#define function_cell(var)	(COMMAND *)((var)->value)
+#define array_cell(var)		(ARRAY *)((var)->value)
+#define assoc_cell(var)		(HASH_TABLE *)((var)->value)
+#define nameref_cell(var)	((var)->value)		/* so it can change later */
+
+#define NAMEREF_MAX	8	/* only 8 levels of nameref indirection */
+
+#define var_isset(var)		((var)->value != 0)
+#define var_isunset(var)	((var)->value == 0)
+#define var_isnull(var)		((var)->value && *(var)->value == 0)
+
+/* Assigning variable values: lvalues */
+#define var_setvalue(var, str)	((var)->value = (str))
+#define var_setfunc(var, func)	((var)->value = (char *)(func))
+#define var_setarray(var, arr)	((var)->value = (char *)(arr))
+#define var_setassoc(var, arr)	((var)->value = (char *)(arr))
+#define var_setref(var, str)	((var)->value = (str))
+
+/* Make VAR be auto-exported. */
+#define set_auto_export(var) \
+  do { (var)->attributes |= att_exported; array_needs_making = 1; } while (0)
+
+#define SETVARATTR(var, attr, undo) \
+	((undo == 0) ? ((var)->attributes |= (attr)) \
+		     : ((var)->attributes &= ~(attr)))
+
+#define VSETATTR(var, attr)	((var)->attributes |= (attr))
+#define VUNSETATTR(var, attr)	((var)->attributes &= ~(attr))
+
+#define VGETFLAGS(var)		((var)->attributes)
+
+#define VSETFLAGS(var, flags)	((var)->attributes = (flags))
+#define VCLRFLAGS(var)		((var)->attributes = 0)
+
+/* Macros to perform various operations on `exportstr' member of a SHELL_VAR. */
+#define CLEAR_EXPORTSTR(var)	(var)->exportstr = (char *)NULL
+#define COPY_EXPORTSTR(var)	((var)->exportstr) ? savestring ((var)->exportstr) : (char *)NULL
+#define SET_EXPORTSTR(var, value)  (var)->exportstr = (value)
+#define SAVE_EXPORTSTR(var, value) (var)->exportstr = (value) ? savestring (value) : (char *)NULL
+
+#define FREE_EXPORTSTR(var) \
+	do { if ((var)->exportstr) free ((var)->exportstr); } while (0)
+
+#define CACHE_IMPORTSTR(var, value) \
+	(var)->exportstr = savestring (value)
+
+#define INVALIDATE_EXPORTSTR(var) \
+	do { \
+	  if ((var)->exportstr) \
+	    { \
+	      free ((var)->exportstr); \
+	      (var)->exportstr = (char *)NULL; \
+	    } \
+	} while (0)
+
+#define ifsname(s)	((s)[0] == 'I' && (s)[1] == 'F' && (s)[2] == 'S' && (s)[3] == '\0')
+
+/* Flag values for make_local_variable and its array counterparts */
+#define MKLOC_ASSOCOK		0x01
+#define MKLOC_ARRAYOK		0x02
+#define MKLOC_INHERIT		0x04
+
+/* Special value for nameref with invalid value for creation or assignment */
+extern SHELL_VAR nameref_invalid_value;
+#define INVALID_NAMEREF_VALUE	(void *)&nameref_invalid_value
+	
+/* Stuff for hacking variables. */
+typedef int sh_var_map_func_t PARAMS((SHELL_VAR *));
+
+/* Where we keep the variables and functions */
+extern VAR_CONTEXT *global_variables;
+extern VAR_CONTEXT *shell_variables;
+
+extern HASH_TABLE *shell_functions;
+extern HASH_TABLE *temporary_env;
+
+extern int variable_context;
+extern char *dollar_vars[];
+extern char **export_env;
+
+extern int tempenv_assign_error;
+extern int array_needs_making;
+extern int shell_level;
+
+/* XXX */
+extern WORD_LIST *rest_of_args;
+extern int posparam_count;
+extern pid_t dollar_dollar_pid;
+
+extern int localvar_inherit;		/* declared in variables.c */
+
+extern void initialize_shell_variables PARAMS((char **, int));
+
+extern int validate_inherited_value PARAMS((SHELL_VAR *, int));
+
+extern SHELL_VAR *set_if_not PARAMS((char *, char *));
+
+extern void sh_set_lines_and_columns PARAMS((int, int));
+extern void set_pwd PARAMS((void));
+extern void set_ppid PARAMS((void));
+extern void make_funcname_visible PARAMS((int));
+
+extern SHELL_VAR *var_lookup PARAMS((const char *, VAR_CONTEXT *));
+
+extern SHELL_VAR *find_function PARAMS((const char *));
+extern FUNCTION_DEF *find_function_def PARAMS((const char *));
+extern SHELL_VAR *find_variable PARAMS((const char *));
+extern SHELL_VAR *find_variable_noref PARAMS((const char *));
+extern SHELL_VAR *find_variable_last_nameref PARAMS((const char *, int));
+extern SHELL_VAR *find_global_variable_last_nameref PARAMS((const char *, int));
+extern SHELL_VAR *find_variable_nameref PARAMS((SHELL_VAR *));
+extern SHELL_VAR *find_variable_nameref_for_create PARAMS((const char *, int));
+extern SHELL_VAR *find_variable_nameref_for_assignment PARAMS((const char *, int));
+/*extern SHELL_VAR *find_variable_internal PARAMS((const char *, int));*/
+extern SHELL_VAR *find_variable_tempenv PARAMS((const char *));
+extern SHELL_VAR *find_variable_notempenv PARAMS((const char *));
+extern SHELL_VAR *find_global_variable PARAMS((const char *));
+extern SHELL_VAR *find_global_variable_noref PARAMS((const char *));
+extern SHELL_VAR *find_shell_variable PARAMS((const char *));
+extern SHELL_VAR *find_tempenv_variable PARAMS((const char *));
+extern SHELL_VAR *find_variable_no_invisible PARAMS((const char *));
+extern SHELL_VAR *find_variable_for_assignment PARAMS((const char *));
+extern char *nameref_transform_name PARAMS((char *, int));
+extern SHELL_VAR *copy_variable PARAMS((SHELL_VAR *));
+extern SHELL_VAR *make_local_variable PARAMS((const char *, int));
+extern SHELL_VAR *bind_variable PARAMS((const char *, char *, int));
+extern SHELL_VAR *bind_global_variable PARAMS((const char *, char *, int));
+extern SHELL_VAR *bind_function PARAMS((const char *, COMMAND *));
+
+extern void bind_function_def PARAMS((const char *, FUNCTION_DEF *, int));
+
+extern SHELL_VAR **map_over PARAMS((sh_var_map_func_t *, VAR_CONTEXT *));
+SHELL_VAR **map_over_funcs PARAMS((sh_var_map_func_t *));
+     
+extern SHELL_VAR **all_shell_variables PARAMS((void));
+extern SHELL_VAR **all_shell_functions PARAMS((void));
+extern SHELL_VAR **all_visible_variables PARAMS((void));
+extern SHELL_VAR **all_visible_functions PARAMS((void));
+extern SHELL_VAR **all_exported_variables PARAMS((void));
+extern SHELL_VAR **local_exported_variables PARAMS((void));
+extern SHELL_VAR **all_local_variables PARAMS((int));
+#if defined (ARRAY_VARS)
+extern SHELL_VAR **all_array_variables PARAMS((void));
+#endif
+extern char **all_variables_matching_prefix PARAMS((const char *));
+
+extern char **make_var_array PARAMS((HASH_TABLE *));
+extern char **add_or_supercede_exported_var PARAMS((char *, int));
+
+extern char *get_variable_value PARAMS((SHELL_VAR *));
+extern char *get_string_value PARAMS((const char *));
+extern char *sh_get_env_value PARAMS((const char *));
+extern char *make_variable_value PARAMS((SHELL_VAR *, char *, int));
+
+extern SHELL_VAR *bind_variable_value PARAMS((SHELL_VAR *, char *, int));
+extern SHELL_VAR *bind_int_variable PARAMS((char *, char *, int));
+extern SHELL_VAR *bind_var_to_int PARAMS((char *, intmax_t));
+
+extern int assign_in_env PARAMS((WORD_DESC *, int));
+
+extern int unbind_variable PARAMS((const char *));
+extern int check_unbind_variable PARAMS((const char *));
+extern int unbind_nameref PARAMS((const char *));
+extern int unbind_variable_noref PARAMS((const char *));
+extern int unbind_func PARAMS((const char *));
+extern int unbind_function_def PARAMS((const char *));
+extern int delete_var PARAMS((const char *, VAR_CONTEXT *));
+extern int makunbound PARAMS((const char *, VAR_CONTEXT *));
+extern int kill_local_variable PARAMS((const char *));
+extern void delete_all_variables PARAMS((HASH_TABLE *));
+extern void delete_all_contexts PARAMS((VAR_CONTEXT *));
+
+extern VAR_CONTEXT *new_var_context PARAMS((char *, int));
+extern void dispose_var_context PARAMS((VAR_CONTEXT *));
+extern VAR_CONTEXT *push_var_context PARAMS((char *, int, HASH_TABLE *));
+extern void pop_var_context PARAMS((void));
+extern VAR_CONTEXT *push_scope PARAMS((int, HASH_TABLE *));
+extern void pop_scope PARAMS((int));
+
+extern void clear_dollar_vars PARAMS((void));
+
+extern void push_context PARAMS((char *, int, HASH_TABLE *));
+extern void pop_context PARAMS((void));
+extern void push_dollar_vars PARAMS((void));
+extern void pop_dollar_vars PARAMS((void));
+extern void dispose_saved_dollar_vars PARAMS((void));
+
+extern void init_bash_argv PARAMS((void));
+extern void save_bash_argv PARAMS((void));
+extern void push_args PARAMS((WORD_LIST *));
+extern void pop_args PARAMS((void));
+
+extern void adjust_shell_level PARAMS((int));
+extern void non_unsettable PARAMS((char *));
+extern void dispose_variable PARAMS((SHELL_VAR *));
+extern void dispose_used_env_vars PARAMS((void));
+extern void dispose_function_env PARAMS((void));
+extern void dispose_builtin_env PARAMS((void));
+extern void merge_temporary_env PARAMS((void));
+extern void flush_temporary_env PARAMS((void));
+extern void merge_builtin_env PARAMS((void));
+extern void kill_all_local_variables PARAMS((void));
+
+extern void set_var_read_only PARAMS((char *));
+extern void set_func_read_only PARAMS((const char *));
+extern void set_var_auto_export PARAMS((char *));
+extern void set_func_auto_export PARAMS((const char *));
+
+extern void sort_variables PARAMS((SHELL_VAR **));
+
+extern int chkexport PARAMS((char *));
+extern void maybe_make_export_env PARAMS((void));
+extern void update_export_env_inplace PARAMS((char *, int, char *));
+extern void put_command_name_into_env PARAMS((char *));
+extern void put_gnu_argv_flags_into_env PARAMS((intmax_t, char *));
+
+extern void print_var_list PARAMS((SHELL_VAR **));
+extern void print_func_list PARAMS((SHELL_VAR **));
+extern void print_assignment PARAMS((SHELL_VAR *));
+extern void print_var_value PARAMS((SHELL_VAR *, int));
+extern void print_var_function PARAMS((SHELL_VAR *));
+
+#if defined (ARRAY_VARS)
+extern SHELL_VAR *make_new_array_variable PARAMS((char *));
+extern SHELL_VAR *make_local_array_variable PARAMS((char *, int));
+
+extern SHELL_VAR *make_new_assoc_variable PARAMS((char *));
+extern SHELL_VAR *make_local_assoc_variable PARAMS((char *, int));
+
+extern void set_pipestatus_array PARAMS((int *, int));
+extern ARRAY *save_pipestatus_array PARAMS((void));
+extern void restore_pipestatus_array PARAMS((ARRAY *));
+#endif
+
+extern void set_pipestatus_from_exit PARAMS((int));
+
+/* The variable in NAME has just had its state changed.  Check to see if it
+   is one of the special ones where something special happens. */
+extern void stupidly_hack_special_variables PARAMS((char *));
+
+/* Reinitialize some special variables that have external effects upon unset
+   when the shell reinitializes itself. */
+extern void reinit_special_variables PARAMS((void));
+
+extern int get_random_number PARAMS((void));
+
+/* The `special variable' functions that get called when a particular
+   variable is set. */
+extern void sv_ifs PARAMS((char *));
+extern void sv_path PARAMS((char *));
+extern void sv_mail PARAMS((char *));
+extern void sv_funcnest PARAMS((char *));
+extern void sv_execignore PARAMS((char *));
+extern void sv_globignore PARAMS((char *));
+extern void sv_ignoreeof PARAMS((char *));
+extern void sv_strict_posix PARAMS((char *));
+extern void sv_optind PARAMS((char *));
+extern void sv_opterr PARAMS((char *));
+extern void sv_locale PARAMS((char *));
+extern void sv_xtracefd PARAMS((char *));
+extern void sv_shcompat PARAMS((char *));
+
+#if defined (READLINE)
+extern void sv_comp_wordbreaks PARAMS((char *));
+extern void sv_terminal PARAMS((char *));
+extern void sv_hostfile PARAMS((char *));
+extern void sv_winsize PARAMS((char *));
+#endif
+
+#if defined (__CYGWIN__)
+extern void sv_home PARAMS((char *));
+#endif
+
+#if defined (HISTORY)
+extern void sv_histsize PARAMS((char *));
+extern void sv_histignore PARAMS((char *));
+extern void sv_history_control PARAMS((char *));
+#  if defined (BANG_HISTORY)
+extern void sv_histchars PARAMS((char *));
+#  endif
+extern void sv_histtimefmt PARAMS((char *));
+#endif /* HISTORY */
+
+#if defined (HAVE_TZSET)
+extern void sv_tz PARAMS((char *));
+#endif
+
+#if defined (JOB_CONTROL)
+extern void sv_childmax PARAMS((char *));
+#endif
+
+#endif /* !_VARIABLES_H_ */
diff --git a/version.c b/version.c
new file mode 100644
index 0000000..8c1568a
--- /dev/null
+++ b/version.c
@@ -0,0 +1,94 @@
+/* version.c -- distribution and version numbers. */
+
+/* Copyright (C) 1989-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+
+#include <stdio.h>
+
+#include "stdc.h"
+
+#include "version.h"
+#include "patchlevel.h"
+#include "conftypes.h"
+
+#include "bashintl.h"
+
+extern char *shell_name;
+
+/* Defines from version.h */
+const char * const dist_version = DISTVERSION;
+const int patch_level = PATCHLEVEL;
+const int build_version = BUILDVERSION;
+#ifdef RELSTATUS
+const char * const release_status = RELSTATUS;
+#else
+const char * const release_status = (char *)0;
+#endif
+const char * const sccs_version = SCCSVERSION;
+
+const char * const bash_copyright = N_("Copyright (C) 2020 Free Software Foundation, Inc.");
+const char * const bash_license = N_("License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\n");
+
+/* If == 31, shell compatible with bash-3.1, == 32 with bash-3.2, and so on */
+int shell_compatibility_level = DEFAULT_COMPAT_LEVEL;
+
+/* Functions for getting, setting, and displaying the shell version. */
+
+/* Forward declarations so we don't have to include externs.h */
+extern char *shell_version_string PARAMS((void));
+extern void show_shell_version PARAMS((int));
+
+/* Give version information about this shell. */
+char *
+shell_version_string ()
+{
+  static char tt[32] = { '\0' };
+
+  if (tt[0] == '\0')
+    {
+      if (release_status)
+#if HAVE_SNPRINTF
+	snprintf (tt, sizeof (tt), "%s.%d(%d)-%s", dist_version, patch_level, build_version, release_status);
+#else
+	sprintf (tt, "%s.%d(%d)-%s", dist_version, patch_level, build_version, release_status);
+#endif
+      else
+#if HAVE_SNPRINTF
+	snprintf (tt, sizeof (tt), "%s.%d(%d)", dist_version, patch_level, build_version);
+#else
+	sprintf (tt, "%s.%d(%d)", dist_version, patch_level, build_version);
+#endif
+    }
+  return tt;
+}
+
+void
+show_shell_version (extended)
+     int extended;
+{
+  printf (_("GNU bash, version %s (%s)\n"), shell_version_string (), MACHTYPE);
+  if (extended)
+    {
+      printf ("%s\n", _(bash_copyright));
+      printf ("%s\n", _(bash_license));
+      printf ("%s\n", _("This is free software; you are free to change and redistribute it."));
+      printf ("%s\n", _("There is NO WARRANTY, to the extent permitted by law."));
+    }
+}
diff --git a/xmalloc.c b/xmalloc.c
new file mode 100644
index 0000000..1b3b408
--- /dev/null
+++ b/xmalloc.c
@@ -0,0 +1,225 @@
+/* xmalloc.c -- safe versions of malloc and realloc */
+
+/* Copyright (C) 1991-2016 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the GNU Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if defined (HAVE_CONFIG_H)
+#include <config.h>
+#endif
+
+#include "bashtypes.h"
+#include <stdio.h>
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#include "error.h"
+
+#include "bashintl.h"
+
+#if !defined (PTR_T)
+#  if defined (__STDC__)
+#    define PTR_T void *
+#  else
+#    define PTR_T char *
+#  endif /* !__STDC__ */
+#endif /* !PTR_T */
+
+#if HAVE_SBRK && !HAVE_DECL_SBRK
+extern char *sbrk();
+#endif
+
+#if HAVE_SBRK && defined (USING_BASH_MALLOC)
+static PTR_T lbreak;
+static int brkfound;
+static size_t allocated;
+#endif
+
+/* **************************************************************** */
+/*								    */
+/*		   Memory Allocation and Deallocation.		    */
+/*								    */
+/* **************************************************************** */
+
+#if HAVE_SBRK && defined (USING_BASH_MALLOC)
+#define FINDBRK() \
+do { \
+  if (brkfound == 0) \
+    { \
+      lbreak = (PTR_T)sbrk (0); \
+      brkfound++; \
+    } \
+} while (0)
+
+static size_t
+findbrk ()
+{
+  FINDBRK();
+  return (char *)sbrk (0) - (char *)lbreak;
+}
+#else
+#define FINDBRK()
+#endif
+
+static void
+allocerr (func, bytes)
+     const char *func;
+     size_t bytes;
+{
+#if HAVE_SBRK && defined (USING_BASH_MALLOC)
+      allocated = findbrk ();
+      fatal_error (_("%s: cannot allocate %lu bytes (%lu bytes allocated)"), func, (unsigned long)bytes, (unsigned long)allocated);
+#else
+      fatal_error (_("%s: cannot allocate %lu bytes"), func, (unsigned long)bytes);
+#endif /* !HAVE_SBRK */
+}
+
+/* Return a pointer to free()able block of memory large enough
+   to hold BYTES number of bytes.  If the memory cannot be allocated,
+   print an error message and abort. */
+PTR_T
+xmalloc (bytes)
+     size_t bytes;
+{
+  PTR_T temp;
+
+#if defined (DEBUG)
+  if (bytes == 0)
+    internal_warning("xmalloc: size argument is 0");
+#endif
+
+  FINDBRK();
+  temp = malloc (bytes);
+
+  if (temp == 0)
+    allocerr ("xmalloc", bytes);
+
+  return (temp);
+}
+
+PTR_T
+xrealloc (pointer, bytes)
+     PTR_T pointer;
+     size_t bytes;
+{
+  PTR_T temp;
+
+#if defined (DEBUG)
+  if (bytes == 0)
+    internal_warning("xrealloc: size argument is 0");
+#endif
+
+  FINDBRK();
+  temp = pointer ? realloc (pointer, bytes) : malloc (bytes);
+
+  if (temp == 0)
+    allocerr ("xrealloc", bytes);
+
+  return (temp);
+}
+
+/* Use this as the function to call when adding unwind protects so we
+   don't need to know what free() returns. */
+void
+xfree (string)
+     PTR_T string;
+{
+  if (string)
+    free (string);
+}
+
+#ifdef USING_BASH_MALLOC
+#include <malloc/shmalloc.h>
+
+static void
+sh_allocerr (func, bytes, file, line)
+     const char *func;
+     size_t bytes;
+     char *file;
+     int line;
+{
+#if HAVE_SBRK
+      allocated = findbrk ();
+      fatal_error (_("%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"), func, file, line, (unsigned long)bytes, (unsigned long)allocated);
+#else
+      fatal_error (_("%s: %s:%d: cannot allocate %lu bytes"), func, file, line, (unsigned long)bytes);
+#endif /* !HAVE_SBRK */
+}
+
+PTR_T
+sh_xmalloc (bytes, file, line)
+     size_t bytes;
+     char *file;
+     int line;
+{
+  PTR_T temp;
+
+#if defined (DEBUG)
+  if (bytes == 0)
+    internal_warning("xmalloc: %s:%d: size argument is 0", file, line);
+#endif
+
+  FINDBRK();
+  temp = sh_malloc (bytes, file, line);
+
+  if (temp == 0)
+    sh_allocerr ("xmalloc", bytes, file, line);
+
+  return (temp);
+}
+
+PTR_T
+sh_xrealloc (pointer, bytes, file, line)
+     PTR_T pointer;
+     size_t bytes;
+     char *file;
+     int line;
+{
+  PTR_T temp;
+
+#if defined (DEBUG)
+  if (bytes == 0)
+    internal_warning("xrealloc: %s:%d: size argument is 0", file, line);
+#endif
+
+  FINDBRK();
+  temp = pointer ? sh_realloc (pointer, bytes, file, line) : sh_malloc (bytes, file, line);
+
+  if (temp == 0)
+    sh_allocerr ("xrealloc", bytes, file, line);
+
+  return (temp);
+}
+
+void
+sh_xfree (string, file, line)
+     PTR_T string;
+     char *file;
+     int line;
+{
+  if (string)
+    sh_free (string, file, line);
+}
+#endif
diff --git a/xmalloc.h b/xmalloc.h
new file mode 100644
index 0000000..55d2e3d
--- /dev/null
+++ b/xmalloc.h
@@ -0,0 +1,66 @@
+/* xmalloc.h -- defines for the `x' memory allocation functions */
+
+/* Copyright (C) 2001-2020 Free Software Foundation, Inc.
+
+   This file is part of GNU Bash, the Bourne Again SHell.
+
+   Bash is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   Bash is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with Bash.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#if !defined (_XMALLOC_H_)
+#define _XMALLOC_H_
+
+#include "stdc.h"
+#include "bashansi.h"
+
+/* Generic pointer type. */
+#ifndef PTR_T
+
+#if defined (__STDC__)
+#  define PTR_T	void *
+#else
+#  define PTR_T char *
+#endif
+
+#endif /* PTR_T */
+
+/* Allocation functions in xmalloc.c */
+extern PTR_T xmalloc PARAMS((size_t));
+extern PTR_T xrealloc PARAMS((void *, size_t));
+extern void xfree PARAMS((void *));
+
+#if defined(USING_BASH_MALLOC) && !defined (DISABLE_MALLOC_WRAPPERS)
+extern PTR_T sh_xmalloc PARAMS((size_t, const char *, int));
+extern PTR_T sh_xrealloc PARAMS((void *, size_t, const char *, int));
+extern void sh_xfree PARAMS((void *, const char *, int));
+
+#define xmalloc(x)	sh_xmalloc((x), __FILE__, __LINE__)
+#define xrealloc(x, n)	sh_xrealloc((x), (n), __FILE__, __LINE__)
+#define xfree(x)	sh_xfree((x), __FILE__, __LINE__)
+
+#ifdef free
+#undef free
+#endif
+#define free(x)		sh_xfree((x), __FILE__, __LINE__)
+
+extern PTR_T sh_malloc PARAMS((size_t, const char *, int));
+
+#ifdef malloc
+#undef malloc
+#endif
+#define malloc(x)	sh_malloc((x), __FILE__, __LINE__)
+
+#endif	/* USING_BASH_MALLOC */
+
+#endif	/* _XMALLOC_H_ */
diff --git a/y.tab.c b/y.tab.c
new file mode 100644
index 0000000..dcc5b7f
--- /dev/null
+++ b/y.tab.c
@@ -0,0 +1,9213 @@
+/* A Bison parser, made by GNU Bison 3.6.4.  */
+
+/* Bison implementation for Yacc-like parsers in C
+
+   Copyright (C) 1984, 1989-1990, 2000-2015, 2018-2020 Free Software Foundation,
+   Inc.
+
+   This program is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+/* As a special exception, you may create a larger work that contains
+   part or all of the Bison parser skeleton and distribute that work
+   under terms of your choice, so long as that work isn't itself a
+   parser generator using the skeleton or a modified version thereof
+   as a parser skeleton.  Alternatively, if you modify or redistribute
+   the parser skeleton itself, you may (at your option) remove this
+   special exception, which will cause the skeleton and the resulting
+   Bison output files to be licensed under the GNU General Public
+   License without this special exception.
+
+   This special exception was added by the Free Software Foundation in
+   version 2.2 of Bison.  */
+
+/* C LALR(1) parser skeleton written by Richard Stallman, by
+   simplifying the original so-called "semantic" parser.  */
+
+/* DO NOT RELY ON FEATURES THAT ARE NOT DOCUMENTED in the manual,
+   especially those whose name start with YY_ or yy_.  They are
+   private implementation details that can be changed or removed.  */
+
+/* All symbols defined below should begin with yy or YY, to avoid
+   infringing on user name space.  This should be done even for local
+   variables, as they might otherwise be expanded by user macros.
+   There are some unavoidable exceptions within include files to
+   define necessary library symbols; they are noted "INFRINGES ON
+   USER NAME SPACE" below.  */
+
+/* Identify Bison output.  */
+#define YYBISON 1
+
+/* Bison version.  */
+#define YYBISON_VERSION "3.6.4"
+
+/* Skeleton name.  */
+#define YYSKELETON_NAME "yacc.c"
+
+/* Pure parsers.  */
+#define YYPURE 0
+
+/* Push parsers.  */
+#define YYPUSH 0
+
+/* Pull parsers.  */
+#define YYPULL 1
+
+
+
+
+/* First part of user prologue.  */
+#line 21 "/Users/chet/src/bash/src/parse.y"
+
+#include "config.h"
+
+#include "bashtypes.h"
+#include "bashansi.h"
+
+#include "filecntl.h"
+
+#if defined (HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+#if defined (HAVE_LOCALE_H)
+#  include <locale.h>
+#endif
+
+#include <stdio.h>
+#include "chartypes.h"
+#include <signal.h>
+
+#include "memalloc.h"
+
+#include "bashintl.h"
+
+#define NEED_STRFTIME_DECL	/* used in externs.h */
+
+#include "shell.h"
+#include "execute_cmd.h"
+#include "typemax.h"		/* SIZE_MAX if needed */
+#include "trap.h"
+#include "flags.h"
+#include "parser.h"
+#include "mailcheck.h"
+#include "test.h"
+#include "builtins.h"
+#include "builtins/common.h"
+#include "builtins/builtext.h"
+
+#include "shmbutil.h"
+
+#if defined (READLINE)
+#  include "bashline.h"
+#  include <readline/readline.h>
+#endif /* READLINE */
+
+#if defined (HISTORY)
+#  include "bashhist.h"
+#  include <readline/history.h>
+#endif /* HISTORY */
+
+#if defined (JOB_CONTROL)
+#  include "jobs.h"
+#else
+extern int cleanup_dead_jobs PARAMS((void));
+#endif /* JOB_CONTROL */
+
+#if defined (ALIAS)
+#  include "alias.h"
+#else
+typedef void *alias_t;
+#endif /* ALIAS */
+
+#if defined (PROMPT_STRING_DECODE)
+#  ifndef _MINIX
+#    include <sys/param.h>
+#  endif
+#  include <time.h>
+#  if defined (TM_IN_SYS_TIME)
+#    include <sys/types.h>
+#    include <sys/time.h>
+#  endif /* TM_IN_SYS_TIME */
+#  include "maxpath.h"
+#endif /* PROMPT_STRING_DECODE */
+
+#define RE_READ_TOKEN	-99
+#define NO_EXPANSION	-100
+
+#define END_ALIAS	-2
+
+#ifdef DEBUG
+#  define YYDEBUG 1
+#else
+#  define YYDEBUG 0
+#endif
+
+#if defined (HANDLE_MULTIBYTE)
+#  define last_shell_getc_is_singlebyte \
+	((shell_input_line_index > 1) \
+		? shell_input_line_property[shell_input_line_index - 1] \
+		: 1)
+#  define MBTEST(x)	((x) && last_shell_getc_is_singlebyte)
+#else
+#  define last_shell_getc_is_singlebyte	1
+#  define MBTEST(x)	((x))
+#endif
+
+#if defined (EXTENDED_GLOB)
+extern int extended_glob;
+#endif
+
+extern int dump_translatable_strings, dump_po_strings;
+
+#if !defined (errno)
+extern int errno;
+#endif
+
+/* **************************************************************** */
+/*								    */
+/*		    "Forward" declarations			    */
+/*								    */
+/* **************************************************************** */
+
+#ifdef DEBUG
+static void debug_parser PARAMS((int));
+#endif
+
+static int yy_getc PARAMS((void));
+static int yy_ungetc PARAMS((int));
+
+#if defined (READLINE)
+static int yy_readline_get PARAMS((void));
+static int yy_readline_unget PARAMS((int));
+#endif
+
+static int yy_string_get PARAMS((void));
+static int yy_string_unget PARAMS((int));
+static void rewind_input_string PARAMS((void));
+static int yy_stream_get PARAMS((void));
+static int yy_stream_unget PARAMS((int));
+
+static int shell_getc PARAMS((int));
+static void shell_ungetc PARAMS((int));
+static void discard_until PARAMS((int));
+
+#if defined (ALIAS) || defined (DPAREN_ARITHMETIC)
+static void push_string PARAMS((char *, int, alias_t *));
+static void pop_string PARAMS((void));
+static void free_string_list PARAMS((void));
+#endif
+
+static char *read_a_line PARAMS((int));
+
+static int reserved_word_acceptable PARAMS((int));
+static int yylex PARAMS((void));
+
+static void push_heredoc PARAMS((REDIRECT *));
+static char *mk_alexpansion PARAMS((char *));
+static int alias_expand_token PARAMS((char *));
+static int time_command_acceptable PARAMS((void));
+static int special_case_tokens PARAMS((char *));
+static int read_token PARAMS((int));
+static char *parse_matched_pair PARAMS((int, int, int, int *, int));
+static char *parse_comsub PARAMS((int, int, int, int *, int));
+#if defined (ARRAY_VARS)
+static char *parse_compound_assignment PARAMS((int *));
+#endif
+#if defined (DPAREN_ARITHMETIC) || defined (ARITH_FOR_COMMAND)
+static int parse_dparen PARAMS((int));
+static int parse_arith_cmd PARAMS((char **, int));
+#endif
+#if defined (COND_COMMAND)
+static void cond_error PARAMS((void));
+static COND_COM *cond_expr PARAMS((void));
+static COND_COM *cond_or PARAMS((void));
+static COND_COM *cond_and PARAMS((void));
+static COND_COM *cond_term PARAMS((void));
+static int cond_skip_newlines PARAMS((void));
+static COMMAND *parse_cond_command PARAMS((void));
+#endif
+#if defined (ARRAY_VARS)
+static int token_is_assignment PARAMS((char *, int));
+static int token_is_ident PARAMS((char *, int));
+#endif
+static int read_token_word PARAMS((int));
+static void discard_parser_constructs PARAMS((int));
+
+static char *error_token_from_token PARAMS((int));
+static char *error_token_from_text PARAMS((void));
+static void print_offending_line PARAMS((void));
+static void report_syntax_error PARAMS((char *));
+
+static void handle_eof_input_unit PARAMS((void));
+static void prompt_again PARAMS((void));
+#if 0
+static void reset_readline_prompt PARAMS((void));
+#endif
+static void print_prompt PARAMS((void));
+
+#if defined (HANDLE_MULTIBYTE)
+static void set_line_mbstate PARAMS((void));
+static char *shell_input_line_property = NULL;
+static size_t shell_input_line_propsize = 0;
+#else
+#  define set_line_mbstate()
+#endif
+
+extern int yyerror PARAMS((const char *));
+
+#ifdef DEBUG
+extern int yydebug;
+#endif
+
+/* Default prompt strings */
+char *primary_prompt = PPROMPT;
+char *secondary_prompt = SPROMPT;
+
+/* PROMPT_STRING_POINTER points to one of these, never to an actual string. */
+char *ps1_prompt, *ps2_prompt;
+
+/* Displayed after reading a command but before executing it in an interactive shell */
+char *ps0_prompt;
+
+/* Handle on the current prompt string.  Indirectly points through
+   ps1_ or ps2_prompt. */
+char **prompt_string_pointer = (char **)NULL;
+char *current_prompt_string;
+
+/* Non-zero means we expand aliases in commands. */
+int expand_aliases = 0;
+
+/* If non-zero, the decoded prompt string undergoes parameter and
+   variable substitution, command substitution, arithmetic substitution,
+   string expansion, process substitution, and quote removal in
+   decode_prompt_string. */
+int promptvars = 1;
+
+/* If non-zero, $'...' and $"..." are expanded when they appear within
+   a ${...} expansion, even when the expansion appears within double
+   quotes. */
+int extended_quote = 1;
+
+/* The number of lines read from input while creating the current command. */
+int current_command_line_count;
+
+/* The number of lines in a command saved while we run parse_and_execute */
+int saved_command_line_count;
+
+/* The token that currently denotes the end of parse. */
+int shell_eof_token;
+
+/* The token currently being read. */
+int current_token;
+
+/* The current parser state. */
+int parser_state;
+
+/* Variables to manage the task of reading here documents, because we need to
+   defer the reading until after a complete command has been collected. */
+static REDIRECT *redir_stack[HEREDOC_MAX];
+int need_here_doc;
+
+/* Where shell input comes from.  History expansion is performed on each
+   line when the shell is interactive. */
+static char *shell_input_line = (char *)NULL;
+static size_t shell_input_line_index;
+static size_t shell_input_line_size;	/* Amount allocated for shell_input_line. */
+static size_t shell_input_line_len;	/* strlen (shell_input_line) */
+
+/* Either zero or EOF. */
+static int shell_input_line_terminator;
+
+/* The line number in a script on which a function definition starts. */
+static int function_dstart;
+
+/* The line number in a script on which a function body starts. */
+static int function_bstart;
+
+/* The line number in a script at which an arithmetic for command starts. */
+static int arith_for_lineno;
+
+/* The decoded prompt string.  Used if READLINE is not defined or if
+   editing is turned off.  Analogous to current_readline_prompt. */
+static char *current_decoded_prompt;
+
+/* The last read token, or NULL.  read_token () uses this for context
+   checking. */
+static int last_read_token;
+
+/* The token read prior to last_read_token. */
+static int token_before_that;
+
+/* The token read prior to token_before_that. */
+static int two_tokens_ago;
+
+static int global_extglob;
+
+/* The line number in a script where the word in a `case WORD', `select WORD'
+   or `for WORD' begins.  This is a nested command maximum, since the array
+   index is decremented after a case, select, or for command is parsed. */
+#define MAX_CASE_NEST	128
+static int word_lineno[MAX_CASE_NEST+1];
+static int word_top = -1;
+
+/* If non-zero, it is the token that we want read_token to return
+   regardless of what text is (or isn't) present to be read.  This
+   is reset by read_token.  If token_to_read == WORD or
+   ASSIGNMENT_WORD, yylval.word should be set to word_desc_to_read. */
+static int token_to_read;
+static WORD_DESC *word_desc_to_read;
+
+static REDIRECTEE source;
+static REDIRECTEE redir;
+
+static FILE *yyoutstream;
+static FILE *yyerrstream;
+
+#line 378 "y.tab.c"
+
+# ifndef YY_CAST
+#  ifdef __cplusplus
+#   define YY_CAST(Type, Val) static_cast<Type> (Val)
+#   define YY_REINTERPRET_CAST(Type, Val) reinterpret_cast<Type> (Val)
+#  else
+#   define YY_CAST(Type, Val) ((Type) (Val))
+#   define YY_REINTERPRET_CAST(Type, Val) ((Type) (Val))
+#  endif
+# endif
+# ifndef YY_NULLPTR
+#  if defined __cplusplus
+#   if 201103L <= __cplusplus
+#    define YY_NULLPTR nullptr
+#   else
+#    define YY_NULLPTR 0
+#   endif
+#  else
+#   define YY_NULLPTR ((void*)0)
+#  endif
+# endif
+
+/* Use api.header.include to #include this header
+   instead of duplicating it here.  */
+#ifndef YY_YY_Y_TAB_H_INCLUDED
+# define YY_YY_Y_TAB_H_INCLUDED
+/* Debug traces.  */
+#ifndef YYDEBUG
+# define YYDEBUG 0
+#endif
+#if YYDEBUG
+extern int yydebug;
+#endif
+
+/* Token kinds.  */
+#ifndef YYTOKENTYPE
+# define YYTOKENTYPE
+  enum yytokentype
+  {
+    YYEMPTY = -2,
+    YYEOF = 0,                     /* "end of file"  */
+    YYerror = 256,                 /* error  */
+    YYUNDEF = 257,                 /* "invalid token"  */
+    IF = 258,                      /* IF  */
+    THEN = 259,                    /* THEN  */
+    ELSE = 260,                    /* ELSE  */
+    ELIF = 261,                    /* ELIF  */
+    FI = 262,                      /* FI  */
+    CASE = 263,                    /* CASE  */
+    ESAC = 264,                    /* ESAC  */
+    FOR = 265,                     /* FOR  */
+    SELECT = 266,                  /* SELECT  */
+    WHILE = 267,                   /* WHILE  */
+    UNTIL = 268,                   /* UNTIL  */
+    DO = 269,                      /* DO  */
+    DONE = 270,                    /* DONE  */
+    FUNCTION = 271,                /* FUNCTION  */
+    COPROC = 272,                  /* COPROC  */
+    COND_START = 273,              /* COND_START  */
+    COND_END = 274,                /* COND_END  */
+    COND_ERROR = 275,              /* COND_ERROR  */
+    IN = 276,                      /* IN  */
+    BANG = 277,                    /* BANG  */
+    TIME = 278,                    /* TIME  */
+    TIMEOPT = 279,                 /* TIMEOPT  */
+    TIMEIGN = 280,                 /* TIMEIGN  */
+    WORD = 281,                    /* WORD  */
+    ASSIGNMENT_WORD = 282,         /* ASSIGNMENT_WORD  */
+    REDIR_WORD = 283,              /* REDIR_WORD  */
+    NUMBER = 284,                  /* NUMBER  */
+    ARITH_CMD = 285,               /* ARITH_CMD  */
+    ARITH_FOR_EXPRS = 286,         /* ARITH_FOR_EXPRS  */
+    COND_CMD = 287,                /* COND_CMD  */
+    AND_AND = 288,                 /* AND_AND  */
+    OR_OR = 289,                   /* OR_OR  */
+    GREATER_GREATER = 290,         /* GREATER_GREATER  */
+    LESS_LESS = 291,               /* LESS_LESS  */
+    LESS_AND = 292,                /* LESS_AND  */
+    LESS_LESS_LESS = 293,          /* LESS_LESS_LESS  */
+    GREATER_AND = 294,             /* GREATER_AND  */
+    SEMI_SEMI = 295,               /* SEMI_SEMI  */
+    SEMI_AND = 296,                /* SEMI_AND  */
+    SEMI_SEMI_AND = 297,           /* SEMI_SEMI_AND  */
+    LESS_LESS_MINUS = 298,         /* LESS_LESS_MINUS  */
+    AND_GREATER = 299,             /* AND_GREATER  */
+    AND_GREATER_GREATER = 300,     /* AND_GREATER_GREATER  */
+    LESS_GREATER = 301,            /* LESS_GREATER  */
+    GREATER_BAR = 302,             /* GREATER_BAR  */
+    BAR_AND = 303,                 /* BAR_AND  */
+    yacc_EOF = 304                 /* yacc_EOF  */
+  };
+  typedef enum yytokentype yytoken_kind_t;
+#endif
+/* Token kinds.  */
+#define YYEOF 0
+#define YYerror 256
+#define YYUNDEF 257
+#define IF 258
+#define THEN 259
+#define ELSE 260
+#define ELIF 261
+#define FI 262
+#define CASE 263
+#define ESAC 264
+#define FOR 265
+#define SELECT 266
+#define WHILE 267
+#define UNTIL 268
+#define DO 269
+#define DONE 270
+#define FUNCTION 271
+#define COPROC 272
+#define COND_START 273
+#define COND_END 274
+#define COND_ERROR 275
+#define IN 276
+#define BANG 277
+#define TIME 278
+#define TIMEOPT 279
+#define TIMEIGN 280
+#define WORD 281
+#define ASSIGNMENT_WORD 282
+#define REDIR_WORD 283
+#define NUMBER 284
+#define ARITH_CMD 285
+#define ARITH_FOR_EXPRS 286
+#define COND_CMD 287
+#define AND_AND 288
+#define OR_OR 289
+#define GREATER_GREATER 290
+#define LESS_LESS 291
+#define LESS_AND 292
+#define LESS_LESS_LESS 293
+#define GREATER_AND 294
+#define SEMI_SEMI 295
+#define SEMI_AND 296
+#define SEMI_SEMI_AND 297
+#define LESS_LESS_MINUS 298
+#define AND_GREATER 299
+#define AND_GREATER_GREATER 300
+#define LESS_GREATER 301
+#define GREATER_BAR 302
+#define BAR_AND 303
+#define yacc_EOF 304
+
+/* Value type.  */
+#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
+union YYSTYPE
+{
+#line 328 "/Users/chet/src/bash/src/parse.y"
+
+  WORD_DESC *word;		/* the word that we read. */
+  int number;			/* the number that we read. */
+  WORD_LIST *word_list;
+  COMMAND *command;
+  REDIRECT *redirect;
+  ELEMENT element;
+  PATTERN_LIST *pattern;
+
+#line 538 "y.tab.c"
+
+};
+typedef union YYSTYPE YYSTYPE;
+# define YYSTYPE_IS_TRIVIAL 1
+# define YYSTYPE_IS_DECLARED 1
+#endif
+
+
+extern YYSTYPE yylval;
+
+int yyparse (void);
+
+#endif /* !YY_YY_Y_TAB_H_INCLUDED  */
+/* Symbol kind.  */
+enum yysymbol_kind_t
+{
+  YYSYMBOL_YYEMPTY = -2,
+  YYSYMBOL_YYEOF = 0,                      /* "end of file"  */
+  YYSYMBOL_YYerror = 1,                    /* error  */
+  YYSYMBOL_YYUNDEF = 2,                    /* "invalid token"  */
+  YYSYMBOL_IF = 3,                         /* IF  */
+  YYSYMBOL_THEN = 4,                       /* THEN  */
+  YYSYMBOL_ELSE = 5,                       /* ELSE  */
+  YYSYMBOL_ELIF = 6,                       /* ELIF  */
+  YYSYMBOL_FI = 7,                         /* FI  */
+  YYSYMBOL_CASE = 8,                       /* CASE  */
+  YYSYMBOL_ESAC = 9,                       /* ESAC  */
+  YYSYMBOL_FOR = 10,                       /* FOR  */
+  YYSYMBOL_SELECT = 11,                    /* SELECT  */
+  YYSYMBOL_WHILE = 12,                     /* WHILE  */
+  YYSYMBOL_UNTIL = 13,                     /* UNTIL  */
+  YYSYMBOL_DO = 14,                        /* DO  */
+  YYSYMBOL_DONE = 15,                      /* DONE  */
+  YYSYMBOL_FUNCTION = 16,                  /* FUNCTION  */
+  YYSYMBOL_COPROC = 17,                    /* COPROC  */
+  YYSYMBOL_COND_START = 18,                /* COND_START  */
+  YYSYMBOL_COND_END = 19,                  /* COND_END  */
+  YYSYMBOL_COND_ERROR = 20,                /* COND_ERROR  */
+  YYSYMBOL_IN = 21,                        /* IN  */
+  YYSYMBOL_BANG = 22,                      /* BANG  */
+  YYSYMBOL_TIME = 23,                      /* TIME  */
+  YYSYMBOL_TIMEOPT = 24,                   /* TIMEOPT  */
+  YYSYMBOL_TIMEIGN = 25,                   /* TIMEIGN  */
+  YYSYMBOL_WORD = 26,                      /* WORD  */
+  YYSYMBOL_ASSIGNMENT_WORD = 27,           /* ASSIGNMENT_WORD  */
+  YYSYMBOL_REDIR_WORD = 28,                /* REDIR_WORD  */
+  YYSYMBOL_NUMBER = 29,                    /* NUMBER  */
+  YYSYMBOL_ARITH_CMD = 30,                 /* ARITH_CMD  */
+  YYSYMBOL_ARITH_FOR_EXPRS = 31,           /* ARITH_FOR_EXPRS  */
+  YYSYMBOL_COND_CMD = 32,                  /* COND_CMD  */
+  YYSYMBOL_AND_AND = 33,                   /* AND_AND  */
+  YYSYMBOL_OR_OR = 34,                     /* OR_OR  */
+  YYSYMBOL_GREATER_GREATER = 35,           /* GREATER_GREATER  */
+  YYSYMBOL_LESS_LESS = 36,                 /* LESS_LESS  */
+  YYSYMBOL_LESS_AND = 37,                  /* LESS_AND  */
+  YYSYMBOL_LESS_LESS_LESS = 38,            /* LESS_LESS_LESS  */
+  YYSYMBOL_GREATER_AND = 39,               /* GREATER_AND  */
+  YYSYMBOL_SEMI_SEMI = 40,                 /* SEMI_SEMI  */
+  YYSYMBOL_SEMI_AND = 41,                  /* SEMI_AND  */
+  YYSYMBOL_SEMI_SEMI_AND = 42,             /* SEMI_SEMI_AND  */
+  YYSYMBOL_LESS_LESS_MINUS = 43,           /* LESS_LESS_MINUS  */
+  YYSYMBOL_AND_GREATER = 44,               /* AND_GREATER  */
+  YYSYMBOL_AND_GREATER_GREATER = 45,       /* AND_GREATER_GREATER  */
+  YYSYMBOL_LESS_GREATER = 46,              /* LESS_GREATER  */
+  YYSYMBOL_GREATER_BAR = 47,               /* GREATER_BAR  */
+  YYSYMBOL_BAR_AND = 48,                   /* BAR_AND  */
+  YYSYMBOL_49_ = 49,                       /* '&'  */
+  YYSYMBOL_50_ = 50,                       /* ';'  */
+  YYSYMBOL_51_n_ = 51,                     /* '\n'  */
+  YYSYMBOL_yacc_EOF = 52,                  /* yacc_EOF  */
+  YYSYMBOL_53_ = 53,                       /* '|'  */
+  YYSYMBOL_54_ = 54,                       /* '>'  */
+  YYSYMBOL_55_ = 55,                       /* '<'  */
+  YYSYMBOL_56_ = 56,                       /* '-'  */
+  YYSYMBOL_57_ = 57,                       /* '{'  */
+  YYSYMBOL_58_ = 58,                       /* '}'  */
+  YYSYMBOL_59_ = 59,                       /* '('  */
+  YYSYMBOL_60_ = 60,                       /* ')'  */
+  YYSYMBOL_YYACCEPT = 61,                  /* $accept  */
+  YYSYMBOL_inputunit = 62,                 /* inputunit  */
+  YYSYMBOL_word_list = 63,                 /* word_list  */
+  YYSYMBOL_redirection = 64,               /* redirection  */
+  YYSYMBOL_simple_command_element = 65,    /* simple_command_element  */
+  YYSYMBOL_redirection_list = 66,          /* redirection_list  */
+  YYSYMBOL_simple_command = 67,            /* simple_command  */
+  YYSYMBOL_command = 68,                   /* command  */
+  YYSYMBOL_shell_command = 69,             /* shell_command  */
+  YYSYMBOL_for_command = 70,               /* for_command  */
+  YYSYMBOL_arith_for_command = 71,         /* arith_for_command  */
+  YYSYMBOL_select_command = 72,            /* select_command  */
+  YYSYMBOL_case_command = 73,              /* case_command  */
+  YYSYMBOL_function_def = 74,              /* function_def  */
+  YYSYMBOL_function_body = 75,             /* function_body  */
+  YYSYMBOL_subshell = 76,                  /* subshell  */
+  YYSYMBOL_coproc = 77,                    /* coproc  */
+  YYSYMBOL_if_command = 78,                /* if_command  */
+  YYSYMBOL_group_command = 79,             /* group_command  */
+  YYSYMBOL_arith_command = 80,             /* arith_command  */
+  YYSYMBOL_cond_command = 81,              /* cond_command  */
+  YYSYMBOL_elif_clause = 82,               /* elif_clause  */
+  YYSYMBOL_case_clause = 83,               /* case_clause  */
+  YYSYMBOL_pattern_list = 84,              /* pattern_list  */
+  YYSYMBOL_case_clause_sequence = 85,      /* case_clause_sequence  */
+  YYSYMBOL_pattern = 86,                   /* pattern  */
+  YYSYMBOL_list = 87,                      /* list  */
+  YYSYMBOL_compound_list = 88,             /* compound_list  */
+  YYSYMBOL_list0 = 89,                     /* list0  */
+  YYSYMBOL_list1 = 90,                     /* list1  */
+  YYSYMBOL_simple_list_terminator = 91,    /* simple_list_terminator  */
+  YYSYMBOL_list_terminator = 92,           /* list_terminator  */
+  YYSYMBOL_newline_list = 93,              /* newline_list  */
+  YYSYMBOL_simple_list = 94,               /* simple_list  */
+  YYSYMBOL_simple_list1 = 95,              /* simple_list1  */
+  YYSYMBOL_pipeline_command = 96,          /* pipeline_command  */
+  YYSYMBOL_pipeline = 97,                  /* pipeline  */
+  YYSYMBOL_timespec = 98                   /* timespec  */
+};
+typedef enum yysymbol_kind_t yysymbol_kind_t;
+
+
+
+
+#ifdef short
+# undef short
+#endif
+
+/* On compilers that do not define __PTRDIFF_MAX__ etc., make sure
+   <limits.h> and (if available) <stdint.h> are included
+   so that the code can choose integer types of a good width.  */
+
+#ifndef __PTRDIFF_MAX__
+# include <limits.h> /* INFRINGES ON USER NAME SPACE */
+# if defined __STDC_VERSION__ && 199901 <= __STDC_VERSION__
+#  include <stdint.h> /* INFRINGES ON USER NAME SPACE */
+#  define YY_STDINT_H
+# endif
+#endif
+
+/* Narrow types that promote to a signed type and that can represent a
+   signed or unsigned integer of at least N bits.  In tables they can
+   save space and decrease cache pressure.  Promoting to a signed type
+   helps avoid bugs in integer arithmetic.  */
+
+#ifdef __INT_LEAST8_MAX__
+typedef __INT_LEAST8_TYPE__ yytype_int8;
+#elif defined YY_STDINT_H
+typedef int_least8_t yytype_int8;
+#else
+typedef signed char yytype_int8;
+#endif
+
+#ifdef __INT_LEAST16_MAX__
+typedef __INT_LEAST16_TYPE__ yytype_int16;
+#elif defined YY_STDINT_H
+typedef int_least16_t yytype_int16;
+#else
+typedef short yytype_int16;
+#endif
+
+#if defined __UINT_LEAST8_MAX__ && __UINT_LEAST8_MAX__ <= __INT_MAX__
+typedef __UINT_LEAST8_TYPE__ yytype_uint8;
+#elif (!defined __UINT_LEAST8_MAX__ && defined YY_STDINT_H \
+       && UINT_LEAST8_MAX <= INT_MAX)
+typedef uint_least8_t yytype_uint8;
+#elif !defined __UINT_LEAST8_MAX__ && UCHAR_MAX <= INT_MAX
+typedef unsigned char yytype_uint8;
+#else
+typedef short yytype_uint8;
+#endif
+
+#if defined __UINT_LEAST16_MAX__ && __UINT_LEAST16_MAX__ <= __INT_MAX__
+typedef __UINT_LEAST16_TYPE__ yytype_uint16;
+#elif (!defined __UINT_LEAST16_MAX__ && defined YY_STDINT_H \
+       && UINT_LEAST16_MAX <= INT_MAX)
+typedef uint_least16_t yytype_uint16;
+#elif !defined __UINT_LEAST16_MAX__ && USHRT_MAX <= INT_MAX
+typedef unsigned short yytype_uint16;
+#else
+typedef int yytype_uint16;
+#endif
+
+#ifndef YYPTRDIFF_T
+# if defined __PTRDIFF_TYPE__ && defined __PTRDIFF_MAX__
+#  define YYPTRDIFF_T __PTRDIFF_TYPE__
+#  define YYPTRDIFF_MAXIMUM __PTRDIFF_MAX__
+# elif defined PTRDIFF_MAX
+#  ifndef ptrdiff_t
+#   include <stddef.h> /* INFRINGES ON USER NAME SPACE */
+#  endif
+#  define YYPTRDIFF_T ptrdiff_t
+#  define YYPTRDIFF_MAXIMUM PTRDIFF_MAX
+# else
+#  define YYPTRDIFF_T long
+#  define YYPTRDIFF_MAXIMUM LONG_MAX
+# endif
+#endif
+
+#ifndef YYSIZE_T
+# ifdef __SIZE_TYPE__
+#  define YYSIZE_T __SIZE_TYPE__
+# elif defined size_t
+#  define YYSIZE_T size_t
+# elif defined __STDC_VERSION__ && 199901 <= __STDC_VERSION__
+#  include <stddef.h> /* INFRINGES ON USER NAME SPACE */
+#  define YYSIZE_T size_t
+# else
+#  define YYSIZE_T unsigned
+# endif
+#endif
+
+#define YYSIZE_MAXIMUM                                  \
+  YY_CAST (YYPTRDIFF_T,                                 \
+           (YYPTRDIFF_MAXIMUM < YY_CAST (YYSIZE_T, -1)  \
+            ? YYPTRDIFF_MAXIMUM                         \
+            : YY_CAST (YYSIZE_T, -1)))
+
+#define YYSIZEOF(X) YY_CAST (YYPTRDIFF_T, sizeof (X))
+
+
+/* Stored state numbers (used for stacks). */
+typedef yytype_int16 yy_state_t;
+
+/* State numbers in computations.  */
+typedef int yy_state_fast_t;
+
+#ifndef YY_
+# if defined YYENABLE_NLS && YYENABLE_NLS
+#  if ENABLE_NLS
+#   include <libintl.h> /* INFRINGES ON USER NAME SPACE */
+#   define YY_(Msgid) dgettext ("bison-runtime", Msgid)
+#  endif
+# endif
+# ifndef YY_
+#  define YY_(Msgid) Msgid
+# endif
+#endif
+
+
+#ifndef YY_ATTRIBUTE_PURE
+# if defined __GNUC__ && 2 < __GNUC__ + (96 <= __GNUC_MINOR__)
+#  define YY_ATTRIBUTE_PURE __attribute__ ((__pure__))
+# else
+#  define YY_ATTRIBUTE_PURE
+# endif
+#endif
+
+#ifndef YY_ATTRIBUTE_UNUSED
+# if defined __GNUC__ && 2 < __GNUC__ + (7 <= __GNUC_MINOR__)
+#  define YY_ATTRIBUTE_UNUSED __attribute__ ((__unused__))
+# else
+#  define YY_ATTRIBUTE_UNUSED
+# endif
+#endif
+
+/* Suppress unused-variable warnings by "using" E.  */
+#if ! defined lint || defined __GNUC__
+# define YYUSE(E) ((void) (E))
+#else
+# define YYUSE(E) /* empty */
+#endif
+
+#if defined __GNUC__ && ! defined __ICC && 407 <= __GNUC__ * 100 + __GNUC_MINOR__
+/* Suppress an incorrect diagnostic about yylval being uninitialized.  */
+# define YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN                            \
+    _Pragma ("GCC diagnostic push")                                     \
+    _Pragma ("GCC diagnostic ignored \"-Wuninitialized\"")              \
+    _Pragma ("GCC diagnostic ignored \"-Wmaybe-uninitialized\"")
+# define YY_IGNORE_MAYBE_UNINITIALIZED_END      \
+    _Pragma ("GCC diagnostic pop")
+#else
+# define YY_INITIAL_VALUE(Value) Value
+#endif
+#ifndef YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN
+# define YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN
+# define YY_IGNORE_MAYBE_UNINITIALIZED_END
+#endif
+#ifndef YY_INITIAL_VALUE
+# define YY_INITIAL_VALUE(Value) /* Nothing. */
+#endif
+
+#if defined __cplusplus && defined __GNUC__ && ! defined __ICC && 6 <= __GNUC__
+# define YY_IGNORE_USELESS_CAST_BEGIN                          \
+    _Pragma ("GCC diagnostic push")                            \
+    _Pragma ("GCC diagnostic ignored \"-Wuseless-cast\"")
+# define YY_IGNORE_USELESS_CAST_END            \
+    _Pragma ("GCC diagnostic pop")
+#endif
+#ifndef YY_IGNORE_USELESS_CAST_BEGIN
+# define YY_IGNORE_USELESS_CAST_BEGIN
+# define YY_IGNORE_USELESS_CAST_END
+#endif
+
+
+#define YY_ASSERT(E) ((void) (0 && (E)))
+
+#if !defined yyoverflow
+
+/* The parser invokes alloca or malloc; define the necessary symbols.  */
+
+# ifdef YYSTACK_USE_ALLOCA
+#  if YYSTACK_USE_ALLOCA
+#   ifdef __GNUC__
+#    define YYSTACK_ALLOC __builtin_alloca
+#   elif defined __BUILTIN_VA_ARG_INCR
+#    include <alloca.h> /* INFRINGES ON USER NAME SPACE */
+#   elif defined _AIX
+#    define YYSTACK_ALLOC __alloca
+#   elif defined _MSC_VER
+#    include <malloc.h> /* INFRINGES ON USER NAME SPACE */
+#    define alloca _alloca
+#   else
+#    define YYSTACK_ALLOC alloca
+#    if ! defined _ALLOCA_H && ! defined EXIT_SUCCESS
+#     include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
+      /* Use EXIT_SUCCESS as a witness for stdlib.h.  */
+#     ifndef EXIT_SUCCESS
+#      define EXIT_SUCCESS 0
+#     endif
+#    endif
+#   endif
+#  endif
+# endif
+
+# ifdef YYSTACK_ALLOC
+   /* Pacify GCC's 'empty if-body' warning.  */
+#  define YYSTACK_FREE(Ptr) do { /* empty */; } while (0)
+#  ifndef YYSTACK_ALLOC_MAXIMUM
+    /* The OS might guarantee only one guard page at the bottom of the stack,
+       and a page size can be as small as 4096 bytes.  So we cannot safely
+       invoke alloca (N) if N exceeds 4096.  Use a slightly smaller number
+       to allow for a few compiler-allocated temporary stack slots.  */
+#   define YYSTACK_ALLOC_MAXIMUM 4032 /* reasonable circa 2006 */
+#  endif
+# else
+#  define YYSTACK_ALLOC YYMALLOC
+#  define YYSTACK_FREE YYFREE
+#  ifndef YYSTACK_ALLOC_MAXIMUM
+#   define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM
+#  endif
+#  if (defined __cplusplus && ! defined EXIT_SUCCESS \
+       && ! ((defined YYMALLOC || defined malloc) \
+             && (defined YYFREE || defined free)))
+#   include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
+#   ifndef EXIT_SUCCESS
+#    define EXIT_SUCCESS 0
+#   endif
+#  endif
+#  ifndef YYMALLOC
+#   define YYMALLOC malloc
+#   if ! defined malloc && ! defined EXIT_SUCCESS
+void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */
+#   endif
+#  endif
+#  ifndef YYFREE
+#   define YYFREE free
+#   if ! defined free && ! defined EXIT_SUCCESS
+void free (void *); /* INFRINGES ON USER NAME SPACE */
+#   endif
+#  endif
+# endif
+#endif /* !defined yyoverflow */
+
+#if (! defined yyoverflow \
+     && (! defined __cplusplus \
+         || (defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL)))
+
+/* A type that is properly aligned for any stack member.  */
+union yyalloc
+{
+  yy_state_t yyss_alloc;
+  YYSTYPE yyvs_alloc;
+};
+
+/* The size of the maximum gap between one aligned stack and the next.  */
+# define YYSTACK_GAP_MAXIMUM (YYSIZEOF (union yyalloc) - 1)
+
+/* The size of an array large to enough to hold all stacks, each with
+   N elements.  */
+# define YYSTACK_BYTES(N) \
+     ((N) * (YYSIZEOF (yy_state_t) + YYSIZEOF (YYSTYPE)) \
+      + YYSTACK_GAP_MAXIMUM)
+
+# define YYCOPY_NEEDED 1
+
+/* Relocate STACK from its old location to the new one.  The
+   local variables YYSIZE and YYSTACKSIZE give the old and new number of
+   elements in the stack, and YYPTR gives the new location of the
+   stack.  Advance YYPTR to a properly aligned location for the next
+   stack.  */
+# define YYSTACK_RELOCATE(Stack_alloc, Stack)                           \
+    do                                                                  \
+      {                                                                 \
+        YYPTRDIFF_T yynewbytes;                                         \
+        YYCOPY (&yyptr->Stack_alloc, Stack, yysize);                    \
+        Stack = &yyptr->Stack_alloc;                                    \
+        yynewbytes = yystacksize * YYSIZEOF (*Stack) + YYSTACK_GAP_MAXIMUM; \
+        yyptr += yynewbytes / YYSIZEOF (*yyptr);                        \
+      }                                                                 \
+    while (0)
+
+#endif
+
+#if defined YYCOPY_NEEDED && YYCOPY_NEEDED
+/* Copy COUNT objects from SRC to DST.  The source and destination do
+   not overlap.  */
+# ifndef YYCOPY
+#  if defined __GNUC__ && 1 < __GNUC__
+#   define YYCOPY(Dst, Src, Count) \
+      __builtin_memcpy (Dst, Src, YY_CAST (YYSIZE_T, (Count)) * sizeof (*(Src)))
+#  else
+#   define YYCOPY(Dst, Src, Count)              \
+      do                                        \
+        {                                       \
+          YYPTRDIFF_T yyi;                      \
+          for (yyi = 0; yyi < (Count); yyi++)   \
+            (Dst)[yyi] = (Src)[yyi];            \
+        }                                       \
+      while (0)
+#  endif
+# endif
+#endif /* !YYCOPY_NEEDED */
+
+/* YYFINAL -- State number of the termination state.  */
+#define YYFINAL  118
+/* YYLAST -- Last index in YYTABLE.  */
+#define YYLAST   661
+
+/* YYNTOKENS -- Number of terminals.  */
+#define YYNTOKENS  61
+/* YYNNTS -- Number of nonterminals.  */
+#define YYNNTS  38
+/* YYNRULES -- Number of rules.  */
+#define YYNRULES  172
+/* YYNSTATES -- Number of states.  */
+#define YYNSTATES  346
+
+#define YYMAXUTOK   304
+
+
+/* YYTRANSLATE(TOKEN-NUM) -- Symbol number corresponding to TOKEN-NUM
+   as returned by yylex, with out-of-bounds checking.  */
+#define YYTRANSLATE(YYX)                                \
+  (0 <= (YYX) && (YYX) <= YYMAXUTOK                     \
+   ? YY_CAST (yysymbol_kind_t, yytranslate[YYX])        \
+   : YYSYMBOL_YYUNDEF)
+
+/* YYTRANSLATE[TOKEN-NUM] -- Symbol number corresponding to TOKEN-NUM
+   as returned by yylex.  */
+static const yytype_int8 yytranslate[] =
+{
+       0,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+      51,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,    49,     2,
+      59,    60,     2,     2,     2,    56,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,    50,
+      55,     2,    54,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,    57,    53,    58,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     1,     2,     3,     4,
+       5,     6,     7,     8,     9,    10,    11,    12,    13,    14,
+      15,    16,    17,    18,    19,    20,    21,    22,    23,    24,
+      25,    26,    27,    28,    29,    30,    31,    32,    33,    34,
+      35,    36,    37,    38,    39,    40,    41,    42,    43,    44,
+      45,    46,    47,    48,    52
+};
+
+#if YYDEBUG
+  /* YYRLINE[YYN] -- Source line where rule number YYN was defined.  */
+static const yytype_int16 yyrline[] =
+{
+       0,   381,   381,   392,   401,   416,   433,   443,   445,   449,
+     455,   461,   467,   473,   479,   485,   491,   497,   503,   509,
+     515,   521,   527,   533,   539,   546,   553,   560,   567,   574,
+     581,   587,   593,   599,   605,   611,   617,   623,   629,   635,
+     641,   647,   653,   659,   665,   671,   677,   683,   689,   695,
+     701,   707,   713,   721,   723,   725,   729,   733,   744,   746,
+     750,   752,   754,   770,   772,   776,   778,   780,   782,   784,
+     786,   788,   790,   792,   794,   796,   800,   805,   810,   815,
+     820,   825,   830,   835,   842,   848,   854,   860,   868,   873,
+     878,   883,   888,   893,   898,   903,   910,   915,   920,   927,
+     929,   931,   933,   937,   939,   970,   977,   982,   999,  1004,
+    1021,  1028,  1030,  1032,  1037,  1041,  1045,  1049,  1051,  1053,
+    1057,  1058,  1062,  1064,  1066,  1068,  1072,  1074,  1076,  1078,
+    1080,  1082,  1086,  1088,  1097,  1105,  1106,  1112,  1113,  1120,
+    1124,  1126,  1128,  1135,  1137,  1139,  1143,  1144,  1147,  1149,
+    1151,  1155,  1156,  1165,  1178,  1194,  1209,  1211,  1213,  1220,
+    1223,  1227,  1229,  1235,  1241,  1261,  1284,  1286,  1309,  1313,
+    1315,  1317,  1319
+};
+#endif
+
+/** Accessing symbol of state STATE.  */
+#define YY_ACCESSING_SYMBOL(State) YY_CAST (yysymbol_kind_t, yystos[State])
+
+#if YYDEBUG || 0
+/* The user-facing name of the symbol whose (internal) number is
+   YYSYMBOL.  No bounds checking.  */
+static const char *yysymbol_name (yysymbol_kind_t yysymbol) YY_ATTRIBUTE_UNUSED;
+
+/* YYTNAME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM.
+   First, the terminals, then, starting at YYNTOKENS, nonterminals.  */
+static const char *const yytname[] =
+{
+  "\"end of file\"", "error", "\"invalid token\"", "IF", "THEN", "ELSE",
+  "ELIF", "FI", "CASE", "ESAC", "FOR", "SELECT", "WHILE", "UNTIL", "DO",
+  "DONE", "FUNCTION", "COPROC", "COND_START", "COND_END", "COND_ERROR",
+  "IN", "BANG", "TIME", "TIMEOPT", "TIMEIGN", "WORD", "ASSIGNMENT_WORD",
+  "REDIR_WORD", "NUMBER", "ARITH_CMD", "ARITH_FOR_EXPRS", "COND_CMD",
+  "AND_AND", "OR_OR", "GREATER_GREATER", "LESS_LESS", "LESS_AND",
+  "LESS_LESS_LESS", "GREATER_AND", "SEMI_SEMI", "SEMI_AND",
+  "SEMI_SEMI_AND", "LESS_LESS_MINUS", "AND_GREATER", "AND_GREATER_GREATER",
+  "LESS_GREATER", "GREATER_BAR", "BAR_AND", "'&'", "';'", "'\\n'",
+  "yacc_EOF", "'|'", "'>'", "'<'", "'-'", "'{'", "'}'", "'('", "')'",
+  "$accept", "inputunit", "word_list", "redirection",
+  "simple_command_element", "redirection_list", "simple_command",
+  "command", "shell_command", "for_command", "arith_for_command",
+  "select_command", "case_command", "function_def", "function_body",
+  "subshell", "coproc", "if_command", "group_command", "arith_command",
+  "cond_command", "elif_clause", "case_clause", "pattern_list",
+  "case_clause_sequence", "pattern", "list", "compound_list", "list0",
+  "list1", "simple_list_terminator", "list_terminator", "newline_list",
+  "simple_list", "simple_list1", "pipeline_command", "pipeline",
+  "timespec", YY_NULLPTR
+};
+
+static const char *
+yysymbol_name (yysymbol_kind_t yysymbol)
+{
+  return yytname[yysymbol];
+}
+#endif
+
+#ifdef YYPRINT
+/* YYTOKNUM[NUM] -- (External) token number corresponding to the
+   (internal) symbol number NUM (which must be that of a token).  */
+static const yytype_int16 yytoknum[] =
+{
+       0,   256,   257,   258,   259,   260,   261,   262,   263,   264,
+     265,   266,   267,   268,   269,   270,   271,   272,   273,   274,
+     275,   276,   277,   278,   279,   280,   281,   282,   283,   284,
+     285,   286,   287,   288,   289,   290,   291,   292,   293,   294,
+     295,   296,   297,   298,   299,   300,   301,   302,   303,    38,
+      59,    10,   304,   124,    62,    60,    45,   123,   125,    40,
+      41
+};
+#endif
+
+#define YYPACT_NINF (-204)
+
+#define yypact_value_is_default(Yyn) \
+  ((Yyn) == YYPACT_NINF)
+
+#define YYTABLE_NINF (-1)
+
+#define yytable_value_is_error(Yyn) \
+  0
+
+  /* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
+     STATE-NUM.  */
+static const yytype_int16 yypact[] =
+{
+     313,   108,  -204,    -6,     8,     2,  -204,  -204,    10,   513,
+      17,   363,   153,   -21,  -204,   593,   606,  -204,    14,    26,
+     113,    41,   127,    72,    85,    92,    95,    98,  -204,  -204,
+     100,   105,  -204,  -204,    65,  -204,  -204,   551,  -204,   572,
+    -204,  -204,  -204,  -204,  -204,  -204,  -204,  -204,  -204,  -204,
+    -204,   146,   140,  -204,    67,   363,  -204,  -204,  -204,   133,
+     413,  -204,    93,    55,   104,   156,   161,    11,    45,   551,
+     572,   163,  -204,  -204,  -204,  -204,  -204,   167,  -204,   152,
+     208,   217,   129,   220,   150,   221,   223,   225,   233,   234,
+     238,   239,   158,   240,   162,   241,   243,   244,   252,   253,
+    -204,  -204,  -204,  -204,  -204,  -204,  -204,  -204,  -204,  -204,
+    -204,  -204,  -204,  -204,  -204,  -204,   194,   227,  -204,  -204,
+    -204,  -204,   572,  -204,  -204,  -204,  -204,  -204,   463,   463,
+    -204,  -204,  -204,  -204,  -204,  -204,  -204,    -7,  -204,    59,
+    -204,    52,  -204,  -204,  -204,  -204,    62,  -204,  -204,  -204,
+     235,   572,  -204,   572,   572,  -204,  -204,  -204,  -204,  -204,
+    -204,  -204,  -204,  -204,  -204,  -204,  -204,  -204,  -204,  -204,
+    -204,  -204,  -204,  -204,  -204,  -204,  -204,  -204,  -204,  -204,
+    -204,  -204,  -204,  -204,  -204,  -204,  -204,  -204,  -204,   413,
+     413,   191,   191,   245,   245,   203,  -204,  -204,  -204,  -204,
+    -204,  -204,    37,  -204,   176,  -204,   270,   228,    76,    79,
+    -204,   176,  -204,   278,   282,   563,  -204,   572,   572,   563,
+    -204,  -204,    67,    67,  -204,  -204,  -204,   291,   413,   413,
+     413,   413,   413,   294,   175,  -204,    28,  -204,  -204,   292,
+    -204,   187,  -204,   250,  -204,  -204,  -204,  -204,  -204,  -204,
+     295,   413,   187,  -204,   251,  -204,  -204,  -204,   563,  -204,
+     304,   314,  -204,  -204,  -204,   196,   196,   196,  -204,  -204,
+    -204,  -204,   179,    38,  -204,  -204,   296,   -28,   302,   274,
+    -204,  -204,  -204,    87,  -204,   318,   276,   322,   280,  -204,
+      -7,  -204,   111,  -204,  -204,  -204,  -204,  -204,  -204,  -204,
+    -204,    39,   319,  -204,  -204,  -204,   114,  -204,  -204,  -204,
+    -204,  -204,  -204,   115,  -204,  -204,   226,  -204,  -204,  -204,
+     413,  -204,  -204,   329,   288,  -204,  -204,   332,   297,  -204,
+    -204,  -204,   413,   338,   303,  -204,  -204,   339,   305,  -204,
+    -204,  -204,  -204,  -204,  -204,  -204
+};
+
+  /* YYDEFACT[STATE-NUM] -- Default reduction number in state STATE-NUM.
+     Performed when YYTABLE does not specify something else to do.  Zero
+     means the default is an error.  */
+static const yytype_uint8 yydefact[] =
+{
+       0,     0,   151,     0,     0,     0,   151,   151,     0,     0,
+       0,     0,   169,    53,    54,     0,     0,   115,     0,     0,
+       0,     0,     0,     0,     0,     0,     0,     0,     3,     6,
+       0,     0,   151,   151,     0,    55,    58,    60,   168,    61,
+      65,    75,    69,    66,    63,    71,    64,    70,    72,    73,
+      74,     0,   153,   160,   161,     0,     4,     5,   135,     0,
+       0,   151,   151,     0,   151,     0,     0,     0,    53,   110,
+     106,     0,   149,   148,   150,   165,   162,   170,   171,     0,
+       0,     0,     0,     0,     0,     0,     0,     0,     0,     0,
+       0,     0,     0,     0,     0,     0,     0,     0,     0,     0,
+      15,    24,    39,    33,    48,    30,    42,    36,    45,    27,
+      51,    52,    21,    18,     9,    10,     0,     0,     1,    53,
+      59,    56,    62,   146,   147,     2,   151,   151,   154,   155,
+     151,   151,   164,   163,   151,   152,   134,   136,   145,     0,
+     151,     0,   151,   151,   151,   151,     0,   151,   151,   151,
+     151,   103,   101,   108,   107,   116,   172,   151,    17,    26,
+      41,    35,    50,    32,    44,    38,    47,    29,    23,    20,
+      13,    14,    16,    25,    40,    34,    49,    31,    43,    37,
+      46,    28,    22,    19,    11,    12,   114,   105,    57,     0,
+       0,   158,   159,     0,     0,     0,   151,   151,   151,   151,
+     151,   151,     0,   151,     0,   151,     0,     0,     0,     0,
+     151,     0,   151,     0,     0,     0,   151,   104,   109,     0,
+     156,   157,   167,   166,   151,   151,   111,     0,     0,     0,
+     138,   139,   137,     0,   120,   151,     0,   151,   151,     0,
+       7,     0,   151,     0,    86,    87,   151,   151,   151,   151,
+       0,     0,     0,   151,     0,    67,    68,   102,     0,    99,
+       0,     0,   113,   140,   141,   142,   143,   144,    98,   126,
+     128,   130,   121,     0,    96,   132,     0,     0,     0,     0,
+      76,     8,   151,     0,    77,     0,     0,     0,     0,    88,
+       0,   151,     0,    89,   100,   112,   151,   127,   129,   131,
+      97,     0,     0,   151,    78,    79,     0,   151,   151,    84,
+      85,    90,    91,     0,   151,   151,   117,   151,   133,   122,
+     123,   151,   151,     0,     0,   151,   151,     0,     0,   151,
+     119,   124,   125,     0,     0,    82,    83,     0,     0,    94,
+      95,   118,    80,    81,    92,    93
+};
+
+  /* YYPGOTO[NTERM-NUM].  */
+static const yytype_int16 yypgoto[] =
+{
+    -204,  -204,   117,   -37,   -19,   -67,   353,  -204,    -8,  -204,
+    -204,  -204,  -204,  -204,  -184,  -204,  -204,  -204,  -204,  -204,
+    -204,    53,  -204,   142,  -204,   102,  -203,    -2,  -204,   283,
+    -204,   -47,   -49,  -204,  -118,     6,    47,  -204
+};
+
+  /* YYDEFGOTO[NTERM-NUM].  */
+static const yytype_int16 yydefgoto[] =
+{
+      -1,    34,   241,    35,    36,   122,    37,    38,    39,    40,
+      41,    42,    43,    44,   152,    45,    46,    47,    48,    49,
+      50,   227,   233,   234,   235,   277,    58,   117,   136,   137,
+     125,    75,    60,    51,    52,   138,    54,    55
+};
+
+  /* YYTABLE[YYPACT[STATE-NUM]] -- What to do in state STATE-NUM.  If
+     positive, shift that token.  If negative, reduce the rule whose
+     number is the opposite.  If YYTABLE_NINF, syntax error.  */
+static const yytype_int16 yytable[] =
+{
+      59,    70,   121,   154,    65,    66,    53,   250,   132,   254,
+     191,   192,   139,   141,     2,   146,   144,    76,   120,     3,
+      61,     4,     5,     6,     7,   302,   196,   197,    64,    10,
+     116,   257,   303,   121,    62,   259,    67,   274,    79,    63,
+     100,    17,   198,   199,   200,   287,   288,   300,     2,    71,
+     120,   237,   101,     3,   275,     4,     5,     6,     7,   151,
+     153,   133,   149,    10,   275,   118,   203,   105,    32,   142,
+     150,   220,   221,   204,   294,    17,   210,   189,   190,   135,
+     201,   193,   194,   211,   217,   188,   218,   276,   135,   135,
+     246,   202,   302,   248,   238,   208,   209,   276,   109,   317,
+     215,   307,    32,   135,    33,    72,    73,    74,   219,   205,
+     135,   110,   143,   135,   121,   130,   121,   188,   111,   212,
+     131,   112,   337,   338,   113,   314,   114,   135,   321,   325,
+     135,   115,   195,   247,    53,    53,   249,   134,   135,   102,
+     206,   207,   103,   140,   308,   213,   214,   228,   229,   230,
+     231,   232,   236,   106,   145,   160,   107,   242,   161,    56,
+      57,   251,   135,   251,   253,   135,   135,   258,   315,   104,
+     147,   322,   326,   126,   127,   148,   164,    77,    78,   165,
+     188,   188,   155,   108,   174,   162,   273,   175,   178,   128,
+     129,   179,   156,   283,   282,    53,    53,   123,   124,   251,
+     251,   239,   240,   243,   292,   291,   166,   151,   224,   225,
+     226,   151,   157,   281,   176,   269,   270,   271,   180,   297,
+     298,   299,   260,   261,   126,   127,    72,    73,    74,   196,
+     197,   329,   225,   306,   158,   278,   279,    72,    73,    74,
+     222,   223,   313,   159,   285,   286,   163,   167,     2,   168,
+     151,   169,   186,     3,   320,     4,     5,     6,     7,   170,
+     171,     8,     9,    10,   172,   173,   177,   181,   332,   182,
+     183,    13,    14,    15,    16,    17,   251,   251,   184,   185,
+      18,    19,    20,    21,    22,   244,   245,   187,    23,    24,
+      25,    26,    27,   255,   316,   216,   135,   256,   262,    30,
+      31,   319,    32,   268,    33,   323,   324,   280,   284,   293,
+     289,   295,   327,   328,     1,   331,     2,   304,   296,   333,
+     334,     3,   275,     4,     5,     6,     7,   341,   252,     8,
+       9,    10,   305,   309,   310,    11,    12,   311,   312,    13,
+      14,    15,    16,    17,   335,   318,   336,   339,    18,    19,
+      20,    21,    22,   342,   344,   340,    23,    24,    25,    26,
+      27,   343,    69,   345,    28,    29,     2,    30,    31,   330,
+      32,     3,    33,     4,     5,     6,     7,   272,   301,     8,
+       9,    10,     0,     0,     0,    11,    12,     0,     0,    13,
+      14,    15,    16,    17,     0,     0,     0,     0,    18,    19,
+      20,    21,    22,     0,     0,     0,    23,    24,    25,    26,
+      27,     0,     0,    72,    73,    74,     2,    30,    31,     0,
+      32,     3,    33,     4,     5,     6,     7,     0,     0,     8,
+       9,    10,     0,     0,     0,    11,    12,     0,     0,    13,
+      14,    15,    16,    17,     0,     0,     0,     0,    18,    19,
+      20,    21,    22,     0,     0,     0,    23,    24,    25,    26,
+      27,     0,     0,     0,   135,     0,     2,    30,    31,     0,
+      32,     3,    33,     4,     5,     6,     7,     0,     0,     8,
+       9,    10,     0,     0,     0,    11,    12,     0,     0,    13,
+      14,    15,    16,    17,     0,     0,     0,     0,    18,    19,
+      20,    21,    22,     0,     0,     0,    23,    24,    25,    26,
+      27,   263,   264,   265,   266,   267,     2,    30,    31,     0,
+      32,     3,    33,     4,     5,     6,     7,     0,     0,     0,
+       0,    10,     0,     0,   290,     0,     0,     0,     0,    68,
+      14,    15,    16,    17,     0,     0,     0,     0,    18,    19,
+      20,    21,    22,     0,     0,     0,    23,    24,    25,    26,
+      27,     0,     0,     0,     0,     0,     2,    30,    31,     0,
+      32,     3,    33,     4,     5,     6,     7,   119,    14,    15,
+      16,    10,     0,     0,     0,     0,    18,    19,    20,    21,
+      22,     0,     0,    17,    23,    24,    25,    26,    27,     0,
+      15,    16,     0,     0,     0,    30,    31,    18,    19,    20,
+      21,    22,     0,     0,   135,    23,    24,    25,    26,    27,
+      32,     0,    33,     0,     0,     0,    30,    31,    80,    81,
+      82,    83,    84,     0,     0,     0,    85,     0,     0,    86,
+      87,    90,    91,    92,    93,    94,     0,    88,    89,    95,
+       0,     0,    96,    97,     0,     0,     0,     0,     0,     0,
+      98,    99
+};
+
+static const yytype_int16 yycheck[] =
+{
+       2,     9,    39,    70,     6,     7,     0,   210,    55,   212,
+     128,   129,    61,    62,     3,    64,    63,    11,    37,     8,
+      26,    10,    11,    12,    13,    53,    33,    34,    26,    18,
+      32,   215,    60,    70,    26,   219,    26,     9,    59,    31,
+      26,    30,    49,    50,    51,   248,   249,     9,     3,    32,
+      69,    14,    26,     8,    26,    10,    11,    12,    13,    67,
+      68,    55,    51,    18,    26,     0,    14,    26,    57,    14,
+      59,   189,   190,    21,   258,    30,    14,   126,   127,    51,
+      21,   130,   131,    21,   151,   122,   153,    59,    51,    51,
+      14,   140,    53,    14,    57,   144,   145,    59,    26,    60,
+     149,    14,    57,    51,    59,    50,    51,    52,   157,    57,
+      51,    26,    57,    51,   151,    48,   153,   154,    26,    57,
+      53,    26,   325,   326,    26,    14,    26,    51,    14,    14,
+      51,    26,   134,    57,   128,   129,    57,     4,    51,    26,
+     142,   143,    29,    50,    57,   147,   148,   196,   197,   198,
+     199,   200,   201,    26,    50,    26,    29,   204,    29,    51,
+      52,   210,    51,   212,   211,    51,    51,   216,    57,    56,
+      14,    57,    57,    33,    34,    14,    26,    24,    25,    29,
+     217,   218,    19,    56,    26,    56,   235,    29,    26,    49,
+      50,    29,    25,   242,   241,   189,   190,    51,    52,   248,
+     249,   203,    26,   205,   253,   252,    56,   215,     5,     6,
+       7,   219,    60,    26,    56,    40,    41,    42,    56,    40,
+      41,    42,   224,   225,    33,    34,    50,    51,    52,    33,
+      34,     5,     6,   282,    26,   237,   238,    50,    51,    52,
+     193,   194,   291,    26,   246,   247,    26,    26,     3,    26,
+     258,    26,    58,     8,   303,    10,    11,    12,    13,    26,
+      26,    16,    17,    18,    26,    26,    26,    26,   317,    26,
+      26,    26,    27,    28,    29,    30,   325,   326,    26,    26,
+      35,    36,    37,    38,    39,    15,    58,    60,    43,    44,
+      45,    46,    47,    15,   296,    60,    51,    15,     7,    54,
+      55,   303,    57,     9,    59,   307,   308,    15,    58,    58,
+      15,     7,   314,   315,     1,   317,     3,    15,     4,   321,
+     322,     8,    26,    10,    11,    12,    13,   329,   211,    16,
+      17,    18,    58,    15,    58,    22,    23,    15,    58,    26,
+      27,    28,    29,    30,    15,    26,    58,    15,    35,    36,
+      37,    38,    39,    15,    15,    58,    43,    44,    45,    46,
+      47,    58,     9,    58,    51,    52,     3,    54,    55,   316,
+      57,     8,    59,    10,    11,    12,    13,   235,   276,    16,
+      17,    18,    -1,    -1,    -1,    22,    23,    -1,    -1,    26,
+      27,    28,    29,    30,    -1,    -1,    -1,    -1,    35,    36,
+      37,    38,    39,    -1,    -1,    -1,    43,    44,    45,    46,
+      47,    -1,    -1,    50,    51,    52,     3,    54,    55,    -1,
+      57,     8,    59,    10,    11,    12,    13,    -1,    -1,    16,
+      17,    18,    -1,    -1,    -1,    22,    23,    -1,    -1,    26,
+      27,    28,    29,    30,    -1,    -1,    -1,    -1,    35,    36,
+      37,    38,    39,    -1,    -1,    -1,    43,    44,    45,    46,
+      47,    -1,    -1,    -1,    51,    -1,     3,    54,    55,    -1,
+      57,     8,    59,    10,    11,    12,    13,    -1,    -1,    16,
+      17,    18,    -1,    -1,    -1,    22,    23,    -1,    -1,    26,
+      27,    28,    29,    30,    -1,    -1,    -1,    -1,    35,    36,
+      37,    38,    39,    -1,    -1,    -1,    43,    44,    45,    46,
+      47,   228,   229,   230,   231,   232,     3,    54,    55,    -1,
+      57,     8,    59,    10,    11,    12,    13,    -1,    -1,    -1,
+      -1,    18,    -1,    -1,   251,    -1,    -1,    -1,    -1,    26,
+      27,    28,    29,    30,    -1,    -1,    -1,    -1,    35,    36,
+      37,    38,    39,    -1,    -1,    -1,    43,    44,    45,    46,
+      47,    -1,    -1,    -1,    -1,    -1,     3,    54,    55,    -1,
+      57,     8,    59,    10,    11,    12,    13,    26,    27,    28,
+      29,    18,    -1,    -1,    -1,    -1,    35,    36,    37,    38,
+      39,    -1,    -1,    30,    43,    44,    45,    46,    47,    -1,
+      28,    29,    -1,    -1,    -1,    54,    55,    35,    36,    37,
+      38,    39,    -1,    -1,    51,    43,    44,    45,    46,    47,
+      57,    -1,    59,    -1,    -1,    -1,    54,    55,    35,    36,
+      37,    38,    39,    -1,    -1,    -1,    43,    -1,    -1,    46,
+      47,    35,    36,    37,    38,    39,    -1,    54,    55,    43,
+      -1,    -1,    46,    47,    -1,    -1,    -1,    -1,    -1,    -1,
+      54,    55
+};
+
+  /* YYSTOS[STATE-NUM] -- The (internal number of the) accessing
+     symbol of state STATE-NUM.  */
+static const yytype_int8 yystos[] =
+{
+       0,     1,     3,     8,    10,    11,    12,    13,    16,    17,
+      18,    22,    23,    26,    27,    28,    29,    30,    35,    36,
+      37,    38,    39,    43,    44,    45,    46,    47,    51,    52,
+      54,    55,    57,    59,    62,    64,    65,    67,    68,    69,
+      70,    71,    72,    73,    74,    76,    77,    78,    79,    80,
+      81,    94,    95,    96,    97,    98,    51,    52,    87,    88,
+      93,    26,    26,    31,    26,    88,    88,    26,    26,    67,
+      69,    32,    50,    51,    52,    92,    96,    24,    25,    59,
+      35,    36,    37,    38,    39,    43,    46,    47,    54,    55,
+      35,    36,    37,    38,    39,    43,    46,    47,    54,    55,
+      26,    26,    26,    29,    56,    26,    26,    29,    56,    26,
+      26,    26,    26,    26,    26,    26,    88,    88,     0,    26,
+      65,    64,    66,    51,    52,    91,    33,    34,    49,    50,
+      48,    53,    92,    96,     4,    51,    89,    90,    96,    93,
+      50,    93,    14,    57,    92,    50,    93,    14,    14,    51,
+      59,    69,    75,    69,    66,    19,    25,    60,    26,    26,
+      26,    29,    56,    26,    26,    29,    56,    26,    26,    26,
+      26,    26,    26,    26,    26,    29,    56,    26,    26,    29,
+      56,    26,    26,    26,    26,    26,    58,    60,    64,    93,
+      93,    95,    95,    93,    93,    88,    33,    34,    49,    50,
+      51,    21,    93,    14,    21,    57,    88,    88,    93,    93,
+      14,    21,    57,    88,    88,    93,    60,    66,    66,    93,
+      95,    95,    97,    97,     5,     6,     7,    82,    93,    93,
+      93,    93,    93,    83,    84,    85,    93,    14,    57,    88,
+      26,    63,    92,    88,    15,    58,    14,    57,    14,    57,
+      87,    93,    63,    92,    87,    15,    15,    75,    93,    75,
+      88,    88,     7,    90,    90,    90,    90,    90,     9,    40,
+      41,    42,    84,    93,     9,    26,    59,    86,    88,    88,
+      15,    26,    92,    93,    58,    88,    88,    87,    87,    15,
+      90,    92,    93,    58,    75,     7,     4,    40,    41,    42,
+       9,    86,    53,    60,    15,    58,    93,    14,    57,    15,
+      58,    15,    58,    93,    14,    57,    88,    60,    26,    88,
+      93,    14,    57,    88,    88,    14,    57,    88,    88,     5,
+      82,    88,    93,    88,    88,    15,    58,    87,    87,    15,
+      58,    88,    15,    58,    15,    58
+};
+
+  /* YYR1[YYN] -- Symbol number of symbol that rule YYN derives.  */
+static const yytype_int8 yyr1[] =
+{
+       0,    61,    62,    62,    62,    62,    62,    63,    63,    64,
+      64,    64,    64,    64,    64,    64,    64,    64,    64,    64,
+      64,    64,    64,    64,    64,    64,    64,    64,    64,    64,
+      64,    64,    64,    64,    64,    64,    64,    64,    64,    64,
+      64,    64,    64,    64,    64,    64,    64,    64,    64,    64,
+      64,    64,    64,    65,    65,    65,    66,    66,    67,    67,
+      68,    68,    68,    68,    68,    69,    69,    69,    69,    69,
+      69,    69,    69,    69,    69,    69,    70,    70,    70,    70,
+      70,    70,    70,    70,    71,    71,    71,    71,    72,    72,
+      72,    72,    72,    72,    72,    72,    73,    73,    73,    74,
+      74,    74,    74,    75,    75,    76,    77,    77,    77,    77,
+      77,    78,    78,    78,    79,    80,    81,    82,    82,    82,
+      83,    83,    84,    84,    84,    84,    85,    85,    85,    85,
+      85,    85,    86,    86,    87,    88,    88,    89,    89,    89,
+      90,    90,    90,    90,    90,    90,    91,    91,    92,    92,
+      92,    93,    93,    94,    94,    94,    95,    95,    95,    95,
+      95,    96,    96,    96,    96,    96,    97,    97,    97,    98,
+      98,    98,    98
+};
+
+  /* YYR2[YYN] -- Number of symbols on the right hand side of rule YYN.  */
+static const yytype_int8 yyr2[] =
+{
+       0,     2,     2,     1,     2,     2,     1,     1,     2,     2,
+       2,     3,     3,     3,     3,     2,     3,     3,     2,     3,
+       3,     2,     3,     3,     2,     3,     3,     2,     3,     3,
+       2,     3,     3,     2,     3,     3,     2,     3,     3,     2,
+       3,     3,     2,     3,     3,     2,     3,     3,     2,     3,
+       3,     2,     2,     1,     1,     1,     1,     2,     1,     2,
+       1,     1,     2,     1,     1,     1,     1,     5,     5,     1,
+       1,     1,     1,     1,     1,     1,     6,     6,     7,     7,
+      10,    10,     9,     9,     7,     7,     5,     5,     6,     6,
+       7,     7,    10,    10,     9,     9,     6,     7,     6,     5,
+       6,     3,     5,     1,     2,     3,     2,     3,     3,     4,
+       2,     5,     7,     6,     3,     1,     3,     4,     6,     5,
+       1,     2,     4,     4,     5,     5,     2,     3,     2,     3,
+       2,     3,     1,     3,     2,     1,     2,     3,     3,     3,
+       4,     4,     4,     4,     4,     1,     1,     1,     1,     1,
+       1,     0,     2,     1,     2,     2,     4,     4,     3,     3,
+       1,     1,     2,     2,     2,     2,     4,     4,     1,     1,
+       2,     2,     3
+};
+
+
+enum { YYENOMEM = -2 };
+
+#define yyerrok         (yyerrstatus = 0)
+#define yyclearin       (yychar = YYEMPTY)
+
+#define YYACCEPT        goto yyacceptlab
+#define YYABORT         goto yyabortlab
+#define YYERROR         goto yyerrorlab
+
+
+#define YYRECOVERING()  (!!yyerrstatus)
+
+#define YYBACKUP(Token, Value)                                    \
+  do                                                              \
+    if (yychar == YYEMPTY)                                        \
+      {                                                           \
+        yychar = (Token);                                         \
+        yylval = (Value);                                         \
+        YYPOPSTACK (yylen);                                       \
+        yystate = *yyssp;                                         \
+        goto yybackup;                                            \
+      }                                                           \
+    else                                                          \
+      {                                                           \
+        yyerror (YY_("syntax error: cannot back up")); \
+        YYERROR;                                                  \
+      }                                                           \
+  while (0)
+
+/* Backward compatibility with an undocumented macro.
+   Use YYerror or YYUNDEF. */
+#define YYERRCODE YYUNDEF
+
+
+/* Enable debugging if requested.  */
+#if YYDEBUG
+
+# ifndef YYFPRINTF
+#  include <stdio.h> /* INFRINGES ON USER NAME SPACE */
+#  define YYFPRINTF fprintf
+# endif
+
+# define YYDPRINTF(Args)                        \
+do {                                            \
+  if (yydebug)                                  \
+    YYFPRINTF Args;                             \
+} while (0)
+
+/* This macro is provided for backward compatibility. */
+# ifndef YY_LOCATION_PRINT
+#  define YY_LOCATION_PRINT(File, Loc) ((void) 0)
+# endif
+
+
+# define YY_SYMBOL_PRINT(Title, Kind, Value, Location)                    \
+do {                                                                      \
+  if (yydebug)                                                            \
+    {                                                                     \
+      YYFPRINTF (stderr, "%s ", Title);                                   \
+      yy_symbol_print (stderr,                                            \
+                  Kind, Value); \
+      YYFPRINTF (stderr, "\n");                                           \
+    }                                                                     \
+} while (0)
+
+
+/*-----------------------------------.
+| Print this symbol's value on YYO.  |
+`-----------------------------------*/
+
+static void
+yy_symbol_value_print (FILE *yyo,
+                       yysymbol_kind_t yykind, YYSTYPE const * const yyvaluep)
+{
+  FILE *yyoutput = yyo;
+  YYUSE (yyoutput);
+  if (!yyvaluep)
+    return;
+# ifdef YYPRINT
+  if (yykind < YYNTOKENS)
+    YYPRINT (yyo, yytoknum[yykind], *yyvaluep);
+# endif
+  YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN
+  YYUSE (yykind);
+  YY_IGNORE_MAYBE_UNINITIALIZED_END
+}
+
+
+/*---------------------------.
+| Print this symbol on YYO.  |
+`---------------------------*/
+
+static void
+yy_symbol_print (FILE *yyo,
+                 yysymbol_kind_t yykind, YYSTYPE const * const yyvaluep)
+{
+  YYFPRINTF (yyo, "%s %s (",
+             yykind < YYNTOKENS ? "token" : "nterm", yysymbol_name (yykind));
+
+  yy_symbol_value_print (yyo, yykind, yyvaluep);
+  YYFPRINTF (yyo, ")");
+}
+
+/*------------------------------------------------------------------.
+| yy_stack_print -- Print the state stack from its BOTTOM up to its |
+| TOP (included).                                                   |
+`------------------------------------------------------------------*/
+
+static void
+yy_stack_print (yy_state_t *yybottom, yy_state_t *yytop)
+{
+  YYFPRINTF (stderr, "Stack now");
+  for (; yybottom <= yytop; yybottom++)
+    {
+      int yybot = *yybottom;
+      YYFPRINTF (stderr, " %d", yybot);
+    }
+  YYFPRINTF (stderr, "\n");
+}
+
+# define YY_STACK_PRINT(Bottom, Top)                            \
+do {                                                            \
+  if (yydebug)                                                  \
+    yy_stack_print ((Bottom), (Top));                           \
+} while (0)
+
+
+/*------------------------------------------------.
+| Report that the YYRULE is going to be reduced.  |
+`------------------------------------------------*/
+
+static void
+yy_reduce_print (yy_state_t *yyssp, YYSTYPE *yyvsp,
+                 int yyrule)
+{
+  int yylno = yyrline[yyrule];
+  int yynrhs = yyr2[yyrule];
+  int yyi;
+  YYFPRINTF (stderr, "Reducing stack by rule %d (line %d):\n",
+             yyrule - 1, yylno);
+  /* The symbols being reduced.  */
+  for (yyi = 0; yyi < yynrhs; yyi++)
+    {
+      YYFPRINTF (stderr, "   $%d = ", yyi + 1);
+      yy_symbol_print (stderr,
+                       YY_ACCESSING_SYMBOL (+yyssp[yyi + 1 - yynrhs]),
+                       &yyvsp[(yyi + 1) - (yynrhs)]);
+      YYFPRINTF (stderr, "\n");
+    }
+}
+
+# define YY_REDUCE_PRINT(Rule)          \
+do {                                    \
+  if (yydebug)                          \
+    yy_reduce_print (yyssp, yyvsp, Rule); \
+} while (0)
+
+/* Nonzero means print parse trace.  It is left uninitialized so that
+   multiple parsers can coexist.  */
+int yydebug;
+#else /* !YYDEBUG */
+# define YYDPRINTF(Args) ((void) 0)
+# define YY_SYMBOL_PRINT(Title, Kind, Value, Location)
+# define YY_STACK_PRINT(Bottom, Top)
+# define YY_REDUCE_PRINT(Rule)
+#endif /* !YYDEBUG */
+
+
+/* YYINITDEPTH -- initial size of the parser's stacks.  */
+#ifndef YYINITDEPTH
+# define YYINITDEPTH 200
+#endif
+
+/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only
+   if the built-in stack extension method is used).
+
+   Do not make this value too large; the results are undefined if
+   YYSTACK_ALLOC_MAXIMUM < YYSTACK_BYTES (YYMAXDEPTH)
+   evaluated with infinite-precision integer arithmetic.  */
+
+#ifndef YYMAXDEPTH
+# define YYMAXDEPTH 10000
+#endif
+
+
+
+
+
+
+/*-----------------------------------------------.
+| Release the memory associated to this symbol.  |
+`-----------------------------------------------*/
+
+static void
+yydestruct (const char *yymsg,
+            yysymbol_kind_t yykind, YYSTYPE *yyvaluep)
+{
+  YYUSE (yyvaluep);
+  if (!yymsg)
+    yymsg = "Deleting";
+  YY_SYMBOL_PRINT (yymsg, yykind, yyvaluep, yylocationp);
+
+  YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN
+  YYUSE (yykind);
+  YY_IGNORE_MAYBE_UNINITIALIZED_END
+}
+
+
+/* The lookahead symbol.  */
+int yychar;
+
+/* The semantic value of the lookahead symbol.  */
+YYSTYPE yylval;
+/* Number of syntax errors so far.  */
+int yynerrs;
+
+
+
+
+/*----------.
+| yyparse.  |
+`----------*/
+
+int
+yyparse (void)
+{
+    yy_state_fast_t yystate;
+    /* Number of tokens to shift before error messages enabled.  */
+    int yyerrstatus;
+
+    /* The stacks and their tools:
+       'yyss': related to states.
+       'yyvs': related to semantic values.
+
+       Refer to the stacks through separate pointers, to allow yyoverflow
+       to reallocate them elsewhere.  */
+
+    /* Their size.  */
+    YYPTRDIFF_T yystacksize;
+
+    /* The state stack.  */
+    yy_state_t yyssa[YYINITDEPTH];
+    yy_state_t *yyss;
+    yy_state_t *yyssp;
+
+    /* The semantic value stack.  */
+    YYSTYPE yyvsa[YYINITDEPTH];
+    YYSTYPE *yyvs;
+    YYSTYPE *yyvsp;
+
+  int yyn;
+  /* The return value of yyparse.  */
+  int yyresult;
+  /* Lookahead token as an internal (translated) token number.  */
+  yysymbol_kind_t yytoken = YYSYMBOL_YYEMPTY;
+  /* The variables used to return semantic value and location from the
+     action routines.  */
+  YYSTYPE yyval;
+
+
+
+#define YYPOPSTACK(N)   (yyvsp -= (N), yyssp -= (N))
+
+  /* The number of symbols on the RHS of the reduced rule.
+     Keep to zero when no symbol should be popped.  */
+  int yylen = 0;
+
+  yynerrs = 0;
+  yystate = 0;
+  yyerrstatus = 0;
+
+  yystacksize = YYINITDEPTH;
+  yyssp = yyss = yyssa;
+  yyvsp = yyvs = yyvsa;
+
+
+  YYDPRINTF ((stderr, "Starting parse\n"));
+
+  yychar = YYEMPTY; /* Cause a token to be read.  */
+  goto yysetstate;
+
+
+/*------------------------------------------------------------.
+| yynewstate -- push a new state, which is found in yystate.  |
+`------------------------------------------------------------*/
+yynewstate:
+  /* In all cases, when you get here, the value and location stacks
+     have just been pushed.  So pushing a state here evens the stacks.  */
+  yyssp++;
+
+
+/*--------------------------------------------------------------------.
+| yysetstate -- set current state (the top of the stack) to yystate.  |
+`--------------------------------------------------------------------*/
+yysetstate:
+  YYDPRINTF ((stderr, "Entering state %d\n", yystate));
+  YY_ASSERT (0 <= yystate && yystate < YYNSTATES);
+  YY_IGNORE_USELESS_CAST_BEGIN
+  *yyssp = YY_CAST (yy_state_t, yystate);
+  YY_IGNORE_USELESS_CAST_END
+  YY_STACK_PRINT (yyss, yyssp);
+
+  if (yyss + yystacksize - 1 <= yyssp)
+#if !defined yyoverflow && !defined YYSTACK_RELOCATE
+    goto yyexhaustedlab;
+#else
+    {
+      /* Get the current used size of the three stacks, in elements.  */
+      YYPTRDIFF_T yysize = yyssp - yyss + 1;
+
+# if defined yyoverflow
+      {
+        /* Give user a chance to reallocate the stack.  Use copies of
+           these so that the &'s don't force the real ones into
+           memory.  */
+        yy_state_t *yyss1 = yyss;
+        YYSTYPE *yyvs1 = yyvs;
+
+        /* Each stack pointer address is followed by the size of the
+           data in use in that stack, in bytes.  This used to be a
+           conditional around just the two extra args, but that might
+           be undefined if yyoverflow is a macro.  */
+        yyoverflow (YY_("memory exhausted"),
+                    &yyss1, yysize * YYSIZEOF (*yyssp),
+                    &yyvs1, yysize * YYSIZEOF (*yyvsp),
+                    &yystacksize);
+        yyss = yyss1;
+        yyvs = yyvs1;
+      }
+# else /* defined YYSTACK_RELOCATE */
+      /* Extend the stack our own way.  */
+      if (YYMAXDEPTH <= yystacksize)
+        goto yyexhaustedlab;
+      yystacksize *= 2;
+      if (YYMAXDEPTH < yystacksize)
+        yystacksize = YYMAXDEPTH;
+
+      {
+        yy_state_t *yyss1 = yyss;
+        union yyalloc *yyptr =
+          YY_CAST (union yyalloc *,
+                   YYSTACK_ALLOC (YY_CAST (YYSIZE_T, YYSTACK_BYTES (yystacksize))));
+        if (! yyptr)
+          goto yyexhaustedlab;
+        YYSTACK_RELOCATE (yyss_alloc, yyss);
+        YYSTACK_RELOCATE (yyvs_alloc, yyvs);
+#  undef YYSTACK_RELOCATE
+        if (yyss1 != yyssa)
+          YYSTACK_FREE (yyss1);
+      }
+# endif
+
+      yyssp = yyss + yysize - 1;
+      yyvsp = yyvs + yysize - 1;
+
+      YY_IGNORE_USELESS_CAST_BEGIN
+      YYDPRINTF ((stderr, "Stack size increased to %ld\n",
+                  YY_CAST (long, yystacksize)));
+      YY_IGNORE_USELESS_CAST_END
+
+      if (yyss + yystacksize - 1 <= yyssp)
+        YYABORT;
+    }
+#endif /* !defined yyoverflow && !defined YYSTACK_RELOCATE */
+
+  if (yystate == YYFINAL)
+    YYACCEPT;
+
+  goto yybackup;
+
+
+/*-----------.
+| yybackup.  |
+`-----------*/
+yybackup:
+  /* Do appropriate processing given the current state.  Read a
+     lookahead token if we need one and don't already have one.  */
+
+  /* First try to decide what to do without reference to lookahead token.  */
+  yyn = yypact[yystate];
+  if (yypact_value_is_default (yyn))
+    goto yydefault;
+
+  /* Not known => get a lookahead token if don't already have one.  */
+
+  /* YYCHAR is either empty, or end-of-input, or a valid lookahead.  */
+  if (yychar == YYEMPTY)
+    {
+      YYDPRINTF ((stderr, "Reading a token\n"));
+      yychar = yylex ();
+    }
+
+  if (yychar <= YYEOF)
+    {
+      yychar = YYEOF;
+      yytoken = YYSYMBOL_YYEOF;
+      YYDPRINTF ((stderr, "Now at end of input.\n"));
+    }
+  else if (yychar == YYerror)
+    {
+      /* The scanner already issued an error message, process directly
+         to error recovery.  But do not keep the error token as
+         lookahead, it is too special and may lead us to an endless
+         loop in error recovery. */
+      yychar = YYUNDEF;
+      yytoken = YYSYMBOL_YYerror;
+      goto yyerrlab1;
+    }
+  else
+    {
+      yytoken = YYTRANSLATE (yychar);
+      YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc);
+    }
+
+  /* If the proper action on seeing token YYTOKEN is to reduce or to
+     detect an error, take that action.  */
+  yyn += yytoken;
+  if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken)
+    goto yydefault;
+  yyn = yytable[yyn];
+  if (yyn <= 0)
+    {
+      if (yytable_value_is_error (yyn))
+        goto yyerrlab;
+      yyn = -yyn;
+      goto yyreduce;
+    }
+
+  /* Count tokens shifted since error; after three, turn off error
+     status.  */
+  if (yyerrstatus)
+    yyerrstatus--;
+
+  /* Shift the lookahead token.  */
+  YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc);
+  yystate = yyn;
+  YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN
+  *++yyvsp = yylval;
+  YY_IGNORE_MAYBE_UNINITIALIZED_END
+
+  /* Discard the shifted token.  */
+  yychar = YYEMPTY;
+  goto yynewstate;
+
+
+/*-----------------------------------------------------------.
+| yydefault -- do the default action for the current state.  |
+`-----------------------------------------------------------*/
+yydefault:
+  yyn = yydefact[yystate];
+  if (yyn == 0)
+    goto yyerrlab;
+  goto yyreduce;
+
+
+/*-----------------------------.
+| yyreduce -- do a reduction.  |
+`-----------------------------*/
+yyreduce:
+  /* yyn is the number of a rule to reduce with.  */
+  yylen = yyr2[yyn];
+
+  /* If YYLEN is nonzero, implement the default value of the action:
+     '$$ = $1'.
+
+     Otherwise, the following line sets YYVAL to garbage.
+     This behavior is undocumented and Bison
+     users should not rely upon it.  Assigning to YYVAL
+     unconditionally makes the parser a bit smaller, and it avoids a
+     GCC warning that YYVAL may be used uninitialized.  */
+  yyval = yyvsp[1-yylen];
+
+
+  YY_REDUCE_PRINT (yyn);
+  switch (yyn)
+    {
+  case 2:
+#line 382 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  /* Case of regular command.  Discard the error
+			     safety net,and return the command just parsed. */
+			  global_command = (yyvsp[-1].command);
+			  eof_encountered = 0;
+			  /* discard_parser_constructs (0); */
+			  if (parser_state & PST_CMDSUBST)
+			    parser_state |= PST_EOFTOKEN;
+			  YYACCEPT;
+			}
+#line 1935 "y.tab.c"
+    break;
+
+  case 3:
+#line 393 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  /* Case of regular command, but not a very
+			     interesting one.  Return a NULL command. */
+			  global_command = (COMMAND *)NULL;
+			  if (parser_state & PST_CMDSUBST)
+			    parser_state |= PST_EOFTOKEN;
+			  YYACCEPT;
+			}
+#line 1948 "y.tab.c"
+    break;
+
+  case 4:
+#line 402 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  /* Error during parsing.  Return NULL command. */
+			  global_command = (COMMAND *)NULL;
+			  eof_encountered = 0;
+			  /* discard_parser_constructs (1); */
+			  if (interactive && parse_and_execute_level == 0)
+			    {
+			      YYACCEPT;
+			    }
+			  else
+			    {
+			      YYABORT;
+			    }
+			}
+#line 1967 "y.tab.c"
+    break;
+
+  case 5:
+#line 417 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  /* EOF after an error.  Do ignoreeof or not.  Really
+			     only interesting in non-interactive shells */
+			  global_command = (COMMAND *)NULL;
+			  if (last_command_exit_value == 0)
+			    last_command_exit_value = EX_BADUSAGE;	/* force error return */
+			  if (interactive && parse_and_execute_level == 0)
+			    {
+			      handle_eof_input_unit ();
+			      YYACCEPT;
+			    }
+			  else
+			    {
+			      YYABORT;
+			    }
+			}
+#line 1988 "y.tab.c"
+    break;
+
+  case 6:
+#line 434 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  /* Case of EOF seen by itself.  Do ignoreeof or
+			     not. */
+			  global_command = (COMMAND *)NULL;
+			  handle_eof_input_unit ();
+			  YYACCEPT;
+			}
+#line 2000 "y.tab.c"
+    break;
+
+  case 7:
+#line 444 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.word_list) = make_word_list ((yyvsp[0].word), (WORD_LIST *)NULL); }
+#line 2006 "y.tab.c"
+    break;
+
+  case 8:
+#line 446 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.word_list) = make_word_list ((yyvsp[0].word), (yyvsp[-1].word_list)); }
+#line 2012 "y.tab.c"
+    break;
+
+  case 9:
+#line 450 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = 1;
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_output_direction, redir, 0);
+			}
+#line 2022 "y.tab.c"
+    break;
+
+  case 10:
+#line 456 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = 0;
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_input_direction, redir, 0);
+			}
+#line 2032 "y.tab.c"
+    break;
+
+  case 11:
+#line 462 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = (yyvsp[-2].number);
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_output_direction, redir, 0);
+			}
+#line 2042 "y.tab.c"
+    break;
+
+  case 12:
+#line 468 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = (yyvsp[-2].number);
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_input_direction, redir, 0);
+			}
+#line 2052 "y.tab.c"
+    break;
+
+  case 13:
+#line 474 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.filename = (yyvsp[-2].word);
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_output_direction, redir, REDIR_VARASSIGN);
+			}
+#line 2062 "y.tab.c"
+    break;
+
+  case 14:
+#line 480 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.filename = (yyvsp[-2].word);
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_input_direction, redir, REDIR_VARASSIGN);
+			}
+#line 2072 "y.tab.c"
+    break;
+
+  case 15:
+#line 486 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = 1;
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_appending_to, redir, 0);
+			}
+#line 2082 "y.tab.c"
+    break;
+
+  case 16:
+#line 492 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = (yyvsp[-2].number);
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_appending_to, redir, 0);
+			}
+#line 2092 "y.tab.c"
+    break;
+
+  case 17:
+#line 498 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.filename = (yyvsp[-2].word);
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_appending_to, redir, REDIR_VARASSIGN);
+			}
+#line 2102 "y.tab.c"
+    break;
+
+  case 18:
+#line 504 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = 1;
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_output_force, redir, 0);
+			}
+#line 2112 "y.tab.c"
+    break;
+
+  case 19:
+#line 510 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = (yyvsp[-2].number);
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_output_force, redir, 0);
+			}
+#line 2122 "y.tab.c"
+    break;
+
+  case 20:
+#line 516 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.filename = (yyvsp[-2].word);
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_output_force, redir, REDIR_VARASSIGN);
+			}
+#line 2132 "y.tab.c"
+    break;
+
+  case 21:
+#line 522 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = 0;
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_input_output, redir, 0);
+			}
+#line 2142 "y.tab.c"
+    break;
+
+  case 22:
+#line 528 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = (yyvsp[-2].number);
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_input_output, redir, 0);
+			}
+#line 2152 "y.tab.c"
+    break;
+
+  case 23:
+#line 534 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.filename = (yyvsp[-2].word);
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_input_output, redir, REDIR_VARASSIGN);
+			}
+#line 2162 "y.tab.c"
+    break;
+
+  case 24:
+#line 540 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = 0;
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_reading_until, redir, 0);
+			  push_heredoc ((yyval.redirect));
+			}
+#line 2173 "y.tab.c"
+    break;
+
+  case 25:
+#line 547 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = (yyvsp[-2].number);
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_reading_until, redir, 0);
+			  push_heredoc ((yyval.redirect));
+			}
+#line 2184 "y.tab.c"
+    break;
+
+  case 26:
+#line 554 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.filename = (yyvsp[-2].word);
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_reading_until, redir, REDIR_VARASSIGN);
+			  push_heredoc ((yyval.redirect));
+			}
+#line 2195 "y.tab.c"
+    break;
+
+  case 27:
+#line 561 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = 0;
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_deblank_reading_until, redir, 0);
+			  push_heredoc ((yyval.redirect));
+			}
+#line 2206 "y.tab.c"
+    break;
+
+  case 28:
+#line 568 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = (yyvsp[-2].number);
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_deblank_reading_until, redir, 0);
+			  push_heredoc ((yyval.redirect));
+			}
+#line 2217 "y.tab.c"
+    break;
+
+  case 29:
+#line 575 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.filename = (yyvsp[-2].word);
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_deblank_reading_until, redir, REDIR_VARASSIGN);
+			  push_heredoc ((yyval.redirect));
+			}
+#line 2228 "y.tab.c"
+    break;
+
+  case 30:
+#line 582 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = 0;
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_reading_string, redir, 0);
+			}
+#line 2238 "y.tab.c"
+    break;
+
+  case 31:
+#line 588 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = (yyvsp[-2].number);
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_reading_string, redir, 0);
+			}
+#line 2248 "y.tab.c"
+    break;
+
+  case 32:
+#line 594 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.filename = (yyvsp[-2].word);
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_reading_string, redir, REDIR_VARASSIGN);
+			}
+#line 2258 "y.tab.c"
+    break;
+
+  case 33:
+#line 600 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = 0;
+			  redir.dest = (yyvsp[0].number);
+			  (yyval.redirect) = make_redirection (source, r_duplicating_input, redir, 0);
+			}
+#line 2268 "y.tab.c"
+    break;
+
+  case 34:
+#line 606 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = (yyvsp[-2].number);
+			  redir.dest = (yyvsp[0].number);
+			  (yyval.redirect) = make_redirection (source, r_duplicating_input, redir, 0);
+			}
+#line 2278 "y.tab.c"
+    break;
+
+  case 35:
+#line 612 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.filename = (yyvsp[-2].word);
+			  redir.dest = (yyvsp[0].number);
+			  (yyval.redirect) = make_redirection (source, r_duplicating_input, redir, REDIR_VARASSIGN);
+			}
+#line 2288 "y.tab.c"
+    break;
+
+  case 36:
+#line 618 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = 1;
+			  redir.dest = (yyvsp[0].number);
+			  (yyval.redirect) = make_redirection (source, r_duplicating_output, redir, 0);
+			}
+#line 2298 "y.tab.c"
+    break;
+
+  case 37:
+#line 624 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = (yyvsp[-2].number);
+			  redir.dest = (yyvsp[0].number);
+			  (yyval.redirect) = make_redirection (source, r_duplicating_output, redir, 0);
+			}
+#line 2308 "y.tab.c"
+    break;
+
+  case 38:
+#line 630 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.filename = (yyvsp[-2].word);
+			  redir.dest = (yyvsp[0].number);
+			  (yyval.redirect) = make_redirection (source, r_duplicating_output, redir, REDIR_VARASSIGN);
+			}
+#line 2318 "y.tab.c"
+    break;
+
+  case 39:
+#line 636 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = 0;
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_duplicating_input_word, redir, 0);
+			}
+#line 2328 "y.tab.c"
+    break;
+
+  case 40:
+#line 642 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = (yyvsp[-2].number);
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_duplicating_input_word, redir, 0);
+			}
+#line 2338 "y.tab.c"
+    break;
+
+  case 41:
+#line 648 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.filename = (yyvsp[-2].word);
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_duplicating_input_word, redir, REDIR_VARASSIGN);
+			}
+#line 2348 "y.tab.c"
+    break;
+
+  case 42:
+#line 654 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = 1;
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_duplicating_output_word, redir, 0);
+			}
+#line 2358 "y.tab.c"
+    break;
+
+  case 43:
+#line 660 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = (yyvsp[-2].number);
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_duplicating_output_word, redir, 0);
+			}
+#line 2368 "y.tab.c"
+    break;
+
+  case 44:
+#line 666 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.filename = (yyvsp[-2].word);
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_duplicating_output_word, redir, REDIR_VARASSIGN);
+			}
+#line 2378 "y.tab.c"
+    break;
+
+  case 45:
+#line 672 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = 1;
+			  redir.dest = 0;
+			  (yyval.redirect) = make_redirection (source, r_close_this, redir, 0);
+			}
+#line 2388 "y.tab.c"
+    break;
+
+  case 46:
+#line 678 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = (yyvsp[-2].number);
+			  redir.dest = 0;
+			  (yyval.redirect) = make_redirection (source, r_close_this, redir, 0);
+			}
+#line 2398 "y.tab.c"
+    break;
+
+  case 47:
+#line 684 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.filename = (yyvsp[-2].word);
+			  redir.dest = 0;
+			  (yyval.redirect) = make_redirection (source, r_close_this, redir, REDIR_VARASSIGN);
+			}
+#line 2408 "y.tab.c"
+    break;
+
+  case 48:
+#line 690 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = 0;
+			  redir.dest = 0;
+			  (yyval.redirect) = make_redirection (source, r_close_this, redir, 0);
+			}
+#line 2418 "y.tab.c"
+    break;
+
+  case 49:
+#line 696 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = (yyvsp[-2].number);
+			  redir.dest = 0;
+			  (yyval.redirect) = make_redirection (source, r_close_this, redir, 0);
+			}
+#line 2428 "y.tab.c"
+    break;
+
+  case 50:
+#line 702 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.filename = (yyvsp[-2].word);
+			  redir.dest = 0;
+			  (yyval.redirect) = make_redirection (source, r_close_this, redir, REDIR_VARASSIGN);
+			}
+#line 2438 "y.tab.c"
+    break;
+
+  case 51:
+#line 708 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = 1;
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_err_and_out, redir, 0);
+			}
+#line 2448 "y.tab.c"
+    break;
+
+  case 52:
+#line 714 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  source.dest = 1;
+			  redir.filename = (yyvsp[0].word);
+			  (yyval.redirect) = make_redirection (source, r_append_err_and_out, redir, 0);
+			}
+#line 2458 "y.tab.c"
+    break;
+
+  case 53:
+#line 722 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.element).word = (yyvsp[0].word); (yyval.element).redirect = 0; }
+#line 2464 "y.tab.c"
+    break;
+
+  case 54:
+#line 724 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.element).word = (yyvsp[0].word); (yyval.element).redirect = 0; }
+#line 2470 "y.tab.c"
+    break;
+
+  case 55:
+#line 726 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.element).redirect = (yyvsp[0].redirect); (yyval.element).word = 0; }
+#line 2476 "y.tab.c"
+    break;
+
+  case 56:
+#line 730 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  (yyval.redirect) = (yyvsp[0].redirect);
+			}
+#line 2484 "y.tab.c"
+    break;
+
+  case 57:
+#line 734 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  register REDIRECT *t;
+
+			  for (t = (yyvsp[-1].redirect); t->next; t = t->next)
+			    ;
+			  t->next = (yyvsp[0].redirect);
+			  (yyval.redirect) = (yyvsp[-1].redirect);
+			}
+#line 2497 "y.tab.c"
+    break;
+
+  case 58:
+#line 745 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = make_simple_command ((yyvsp[0].element), (COMMAND *)NULL); }
+#line 2503 "y.tab.c"
+    break;
+
+  case 59:
+#line 747 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = make_simple_command ((yyvsp[0].element), (yyvsp[-1].command)); }
+#line 2509 "y.tab.c"
+    break;
+
+  case 60:
+#line 751 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = clean_simple_command ((yyvsp[0].command)); }
+#line 2515 "y.tab.c"
+    break;
+
+  case 61:
+#line 753 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = (yyvsp[0].command); }
+#line 2521 "y.tab.c"
+    break;
+
+  case 62:
+#line 755 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  COMMAND *tc;
+
+			  tc = (yyvsp[-1].command);
+			  if (tc && tc->redirects)
+			    {
+			      register REDIRECT *t;
+			      for (t = tc->redirects; t->next; t = t->next)
+				;
+			      t->next = (yyvsp[0].redirect);
+			    }
+			  else if (tc)
+			    tc->redirects = (yyvsp[0].redirect);
+			  (yyval.command) = (yyvsp[-1].command);
+			}
+#line 2541 "y.tab.c"
+    break;
+
+  case 63:
+#line 771 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = (yyvsp[0].command); }
+#line 2547 "y.tab.c"
+    break;
+
+  case 64:
+#line 773 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = (yyvsp[0].command); }
+#line 2553 "y.tab.c"
+    break;
+
+  case 65:
+#line 777 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = (yyvsp[0].command); }
+#line 2559 "y.tab.c"
+    break;
+
+  case 66:
+#line 779 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = (yyvsp[0].command); }
+#line 2565 "y.tab.c"
+    break;
+
+  case 67:
+#line 781 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = make_while_command ((yyvsp[-3].command), (yyvsp[-1].command)); }
+#line 2571 "y.tab.c"
+    break;
+
+  case 68:
+#line 783 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = make_until_command ((yyvsp[-3].command), (yyvsp[-1].command)); }
+#line 2577 "y.tab.c"
+    break;
+
+  case 69:
+#line 785 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = (yyvsp[0].command); }
+#line 2583 "y.tab.c"
+    break;
+
+  case 70:
+#line 787 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = (yyvsp[0].command); }
+#line 2589 "y.tab.c"
+    break;
+
+  case 71:
+#line 789 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = (yyvsp[0].command); }
+#line 2595 "y.tab.c"
+    break;
+
+  case 72:
+#line 791 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = (yyvsp[0].command); }
+#line 2601 "y.tab.c"
+    break;
+
+  case 73:
+#line 793 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = (yyvsp[0].command); }
+#line 2607 "y.tab.c"
+    break;
+
+  case 74:
+#line 795 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = (yyvsp[0].command); }
+#line 2613 "y.tab.c"
+    break;
+
+  case 75:
+#line 797 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = (yyvsp[0].command); }
+#line 2619 "y.tab.c"
+    break;
+
+  case 76:
+#line 801 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  (yyval.command) = make_for_command ((yyvsp[-4].word), add_string_to_list ("\"$@\"", (WORD_LIST *)NULL), (yyvsp[-1].command), word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+#line 2628 "y.tab.c"
+    break;
+
+  case 77:
+#line 806 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  (yyval.command) = make_for_command ((yyvsp[-4].word), add_string_to_list ("\"$@\"", (WORD_LIST *)NULL), (yyvsp[-1].command), word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+#line 2637 "y.tab.c"
+    break;
+
+  case 78:
+#line 811 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  (yyval.command) = make_for_command ((yyvsp[-5].word), add_string_to_list ("\"$@\"", (WORD_LIST *)NULL), (yyvsp[-1].command), word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+#line 2646 "y.tab.c"
+    break;
+
+  case 79:
+#line 816 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  (yyval.command) = make_for_command ((yyvsp[-5].word), add_string_to_list ("\"$@\"", (WORD_LIST *)NULL), (yyvsp[-1].command), word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+#line 2655 "y.tab.c"
+    break;
+
+  case 80:
+#line 821 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  (yyval.command) = make_for_command ((yyvsp[-8].word), REVERSE_LIST ((yyvsp[-5].word_list), WORD_LIST *), (yyvsp[-1].command), word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+#line 2664 "y.tab.c"
+    break;
+
+  case 81:
+#line 826 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  (yyval.command) = make_for_command ((yyvsp[-8].word), REVERSE_LIST ((yyvsp[-5].word_list), WORD_LIST *), (yyvsp[-1].command), word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+#line 2673 "y.tab.c"
+    break;
+
+  case 82:
+#line 831 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  (yyval.command) = make_for_command ((yyvsp[-7].word), (WORD_LIST *)NULL, (yyvsp[-1].command), word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+#line 2682 "y.tab.c"
+    break;
+
+  case 83:
+#line 836 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  (yyval.command) = make_for_command ((yyvsp[-7].word), (WORD_LIST *)NULL, (yyvsp[-1].command), word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+#line 2691 "y.tab.c"
+    break;
+
+  case 84:
+#line 843 "/Users/chet/src/bash/src/parse.y"
+                                {
+				  (yyval.command) = make_arith_for_command ((yyvsp[-5].word_list), (yyvsp[-1].command), arith_for_lineno);
+				  if ((yyval.command) == 0) YYERROR;
+				  if (word_top > 0) word_top--;
+				}
+#line 2701 "y.tab.c"
+    break;
+
+  case 85:
+#line 849 "/Users/chet/src/bash/src/parse.y"
+                                {
+				  (yyval.command) = make_arith_for_command ((yyvsp[-5].word_list), (yyvsp[-1].command), arith_for_lineno);
+				  if ((yyval.command) == 0) YYERROR;
+				  if (word_top > 0) word_top--;
+				}
+#line 2711 "y.tab.c"
+    break;
+
+  case 86:
+#line 855 "/Users/chet/src/bash/src/parse.y"
+                                {
+				  (yyval.command) = make_arith_for_command ((yyvsp[-3].word_list), (yyvsp[-1].command), arith_for_lineno);
+				  if ((yyval.command) == 0) YYERROR;
+				  if (word_top > 0) word_top--;
+				}
+#line 2721 "y.tab.c"
+    break;
+
+  case 87:
+#line 861 "/Users/chet/src/bash/src/parse.y"
+                                {
+				  (yyval.command) = make_arith_for_command ((yyvsp[-3].word_list), (yyvsp[-1].command), arith_for_lineno);
+				  if ((yyval.command) == 0) YYERROR;
+				  if (word_top > 0) word_top--;
+				}
+#line 2731 "y.tab.c"
+    break;
+
+  case 88:
+#line 869 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  (yyval.command) = make_select_command ((yyvsp[-4].word), add_string_to_list ("\"$@\"", (WORD_LIST *)NULL), (yyvsp[-1].command), word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+#line 2740 "y.tab.c"
+    break;
+
+  case 89:
+#line 874 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  (yyval.command) = make_select_command ((yyvsp[-4].word), add_string_to_list ("\"$@\"", (WORD_LIST *)NULL), (yyvsp[-1].command), word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+#line 2749 "y.tab.c"
+    break;
+
+  case 90:
+#line 879 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  (yyval.command) = make_select_command ((yyvsp[-5].word), add_string_to_list ("\"$@\"", (WORD_LIST *)NULL), (yyvsp[-1].command), word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+#line 2758 "y.tab.c"
+    break;
+
+  case 91:
+#line 884 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  (yyval.command) = make_select_command ((yyvsp[-5].word), add_string_to_list ("\"$@\"", (WORD_LIST *)NULL), (yyvsp[-1].command), word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+#line 2767 "y.tab.c"
+    break;
+
+  case 92:
+#line 889 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  (yyval.command) = make_select_command ((yyvsp[-8].word), REVERSE_LIST ((yyvsp[-5].word_list), WORD_LIST *), (yyvsp[-1].command), word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+#line 2776 "y.tab.c"
+    break;
+
+  case 93:
+#line 894 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  (yyval.command) = make_select_command ((yyvsp[-8].word), REVERSE_LIST ((yyvsp[-5].word_list), WORD_LIST *), (yyvsp[-1].command), word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+#line 2785 "y.tab.c"
+    break;
+
+  case 94:
+#line 899 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  (yyval.command) = make_select_command ((yyvsp[-7].word), (WORD_LIST *)NULL, (yyvsp[-1].command), word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+#line 2794 "y.tab.c"
+    break;
+
+  case 95:
+#line 904 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  (yyval.command) = make_select_command ((yyvsp[-7].word), (WORD_LIST *)NULL, (yyvsp[-1].command), word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+#line 2803 "y.tab.c"
+    break;
+
+  case 96:
+#line 911 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  (yyval.command) = make_case_command ((yyvsp[-4].word), (PATTERN_LIST *)NULL, word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+#line 2812 "y.tab.c"
+    break;
+
+  case 97:
+#line 916 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  (yyval.command) = make_case_command ((yyvsp[-5].word), (yyvsp[-2].pattern), word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+#line 2821 "y.tab.c"
+    break;
+
+  case 98:
+#line 921 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  (yyval.command) = make_case_command ((yyvsp[-4].word), (yyvsp[-1].pattern), word_lineno[word_top]);
+			  if (word_top > 0) word_top--;
+			}
+#line 2830 "y.tab.c"
+    break;
+
+  case 99:
+#line 928 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = make_function_def ((yyvsp[-4].word), (yyvsp[0].command), function_dstart, function_bstart); }
+#line 2836 "y.tab.c"
+    break;
+
+  case 100:
+#line 930 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = make_function_def ((yyvsp[-4].word), (yyvsp[0].command), function_dstart, function_bstart); }
+#line 2842 "y.tab.c"
+    break;
+
+  case 101:
+#line 932 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = make_function_def ((yyvsp[-1].word), (yyvsp[0].command), function_dstart, function_bstart); }
+#line 2848 "y.tab.c"
+    break;
+
+  case 102:
+#line 934 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = make_function_def ((yyvsp[-3].word), (yyvsp[0].command), function_dstart, function_bstart); }
+#line 2854 "y.tab.c"
+    break;
+
+  case 103:
+#line 938 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = (yyvsp[0].command); }
+#line 2860 "y.tab.c"
+    break;
+
+  case 104:
+#line 940 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  COMMAND *tc;
+
+			  tc = (yyvsp[-1].command);
+			  /* According to Posix.2 3.9.5, redirections
+			     specified after the body of a function should
+			     be attached to the function and performed when
+			     the function is executed, not as part of the
+			     function definition command. */
+			  /* XXX - I don't think it matters, but we might
+			     want to change this in the future to avoid
+			     problems differentiating between a function
+			     definition with a redirection and a function
+			     definition containing a single command with a
+			     redirection.  The two are semantically equivalent,
+			     though -- the only difference is in how the
+			     command printing code displays the redirections. */
+			  if (tc && tc->redirects)
+			    {
+			      register REDIRECT *t;
+			      for (t = tc->redirects; t->next; t = t->next)
+				;
+			      t->next = (yyvsp[0].redirect);
+			    }
+			  else if (tc)
+			    tc->redirects = (yyvsp[0].redirect);
+			  (yyval.command) = (yyvsp[-1].command);
+			}
+#line 2893 "y.tab.c"
+    break;
+
+  case 105:
+#line 971 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  (yyval.command) = make_subshell_command ((yyvsp[-1].command));
+			  (yyval.command)->flags |= CMD_WANT_SUBSHELL;
+			}
+#line 2902 "y.tab.c"
+    break;
+
+  case 106:
+#line 978 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  (yyval.command) = make_coproc_command ("COPROC", (yyvsp[0].command));
+			  (yyval.command)->flags |= CMD_WANT_SUBSHELL|CMD_COPROC_SUBSHELL;
+			}
+#line 2911 "y.tab.c"
+    break;
+
+  case 107:
+#line 983 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  COMMAND *tc;
+
+			  tc = (yyvsp[-1].command);
+			  if (tc && tc->redirects)
+			    {
+			      register REDIRECT *t;
+			      for (t = tc->redirects; t->next; t = t->next)
+				;
+			      t->next = (yyvsp[0].redirect);
+			    }
+			  else if (tc)
+			    tc->redirects = (yyvsp[0].redirect);
+			  (yyval.command) = make_coproc_command ("COPROC", (yyvsp[-1].command));
+			  (yyval.command)->flags |= CMD_WANT_SUBSHELL|CMD_COPROC_SUBSHELL;
+			}
+#line 2932 "y.tab.c"
+    break;
+
+  case 108:
+#line 1000 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  (yyval.command) = make_coproc_command ((yyvsp[-1].word)->word, (yyvsp[0].command));
+			  (yyval.command)->flags |= CMD_WANT_SUBSHELL|CMD_COPROC_SUBSHELL;
+			}
+#line 2941 "y.tab.c"
+    break;
+
+  case 109:
+#line 1005 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  COMMAND *tc;
+
+			  tc = (yyvsp[-1].command);
+			  if (tc && tc->redirects)
+			    {
+			      register REDIRECT *t;
+			      for (t = tc->redirects; t->next; t = t->next)
+				;
+			      t->next = (yyvsp[0].redirect);
+			    }
+			  else if (tc)
+			    tc->redirects = (yyvsp[0].redirect);
+			  (yyval.command) = make_coproc_command ((yyvsp[-2].word)->word, (yyvsp[-1].command));
+			  (yyval.command)->flags |= CMD_WANT_SUBSHELL|CMD_COPROC_SUBSHELL;
+			}
+#line 2962 "y.tab.c"
+    break;
+
+  case 110:
+#line 1022 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  (yyval.command) = make_coproc_command ("COPROC", clean_simple_command ((yyvsp[0].command)));
+			  (yyval.command)->flags |= CMD_WANT_SUBSHELL|CMD_COPROC_SUBSHELL;
+			}
+#line 2971 "y.tab.c"
+    break;
+
+  case 111:
+#line 1029 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = make_if_command ((yyvsp[-3].command), (yyvsp[-1].command), (COMMAND *)NULL); }
+#line 2977 "y.tab.c"
+    break;
+
+  case 112:
+#line 1031 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = make_if_command ((yyvsp[-5].command), (yyvsp[-3].command), (yyvsp[-1].command)); }
+#line 2983 "y.tab.c"
+    break;
+
+  case 113:
+#line 1033 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = make_if_command ((yyvsp[-4].command), (yyvsp[-2].command), (yyvsp[-1].command)); }
+#line 2989 "y.tab.c"
+    break;
+
+  case 114:
+#line 1038 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = make_group_command ((yyvsp[-1].command)); }
+#line 2995 "y.tab.c"
+    break;
+
+  case 115:
+#line 1042 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = make_arith_command ((yyvsp[0].word_list)); }
+#line 3001 "y.tab.c"
+    break;
+
+  case 116:
+#line 1046 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = (yyvsp[-1].command); }
+#line 3007 "y.tab.c"
+    break;
+
+  case 117:
+#line 1050 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = make_if_command ((yyvsp[-2].command), (yyvsp[0].command), (COMMAND *)NULL); }
+#line 3013 "y.tab.c"
+    break;
+
+  case 118:
+#line 1052 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = make_if_command ((yyvsp[-4].command), (yyvsp[-2].command), (yyvsp[0].command)); }
+#line 3019 "y.tab.c"
+    break;
+
+  case 119:
+#line 1054 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = make_if_command ((yyvsp[-3].command), (yyvsp[-1].command), (yyvsp[0].command)); }
+#line 3025 "y.tab.c"
+    break;
+
+  case 121:
+#line 1059 "/Users/chet/src/bash/src/parse.y"
+                        { (yyvsp[0].pattern)->next = (yyvsp[-1].pattern); (yyval.pattern) = (yyvsp[0].pattern); }
+#line 3031 "y.tab.c"
+    break;
+
+  case 122:
+#line 1063 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.pattern) = make_pattern_list ((yyvsp[-2].word_list), (yyvsp[0].command)); }
+#line 3037 "y.tab.c"
+    break;
+
+  case 123:
+#line 1065 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.pattern) = make_pattern_list ((yyvsp[-2].word_list), (COMMAND *)NULL); }
+#line 3043 "y.tab.c"
+    break;
+
+  case 124:
+#line 1067 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.pattern) = make_pattern_list ((yyvsp[-2].word_list), (yyvsp[0].command)); }
+#line 3049 "y.tab.c"
+    break;
+
+  case 125:
+#line 1069 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.pattern) = make_pattern_list ((yyvsp[-2].word_list), (COMMAND *)NULL); }
+#line 3055 "y.tab.c"
+    break;
+
+  case 126:
+#line 1073 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.pattern) = (yyvsp[-1].pattern); }
+#line 3061 "y.tab.c"
+    break;
+
+  case 127:
+#line 1075 "/Users/chet/src/bash/src/parse.y"
+                        { (yyvsp[-1].pattern)->next = (yyvsp[-2].pattern); (yyval.pattern) = (yyvsp[-1].pattern); }
+#line 3067 "y.tab.c"
+    break;
+
+  case 128:
+#line 1077 "/Users/chet/src/bash/src/parse.y"
+                        { (yyvsp[-1].pattern)->flags |= CASEPAT_FALLTHROUGH; (yyval.pattern) = (yyvsp[-1].pattern); }
+#line 3073 "y.tab.c"
+    break;
+
+  case 129:
+#line 1079 "/Users/chet/src/bash/src/parse.y"
+                        { (yyvsp[-1].pattern)->flags |= CASEPAT_FALLTHROUGH; (yyvsp[-1].pattern)->next = (yyvsp[-2].pattern); (yyval.pattern) = (yyvsp[-1].pattern); }
+#line 3079 "y.tab.c"
+    break;
+
+  case 130:
+#line 1081 "/Users/chet/src/bash/src/parse.y"
+                        { (yyvsp[-1].pattern)->flags |= CASEPAT_TESTNEXT; (yyval.pattern) = (yyvsp[-1].pattern); }
+#line 3085 "y.tab.c"
+    break;
+
+  case 131:
+#line 1083 "/Users/chet/src/bash/src/parse.y"
+                        { (yyvsp[-1].pattern)->flags |= CASEPAT_TESTNEXT; (yyvsp[-1].pattern)->next = (yyvsp[-2].pattern); (yyval.pattern) = (yyvsp[-1].pattern); }
+#line 3091 "y.tab.c"
+    break;
+
+  case 132:
+#line 1087 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.word_list) = make_word_list ((yyvsp[0].word), (WORD_LIST *)NULL); }
+#line 3097 "y.tab.c"
+    break;
+
+  case 133:
+#line 1089 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.word_list) = make_word_list ((yyvsp[0].word), (yyvsp[-2].word_list)); }
+#line 3103 "y.tab.c"
+    break;
+
+  case 134:
+#line 1098 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  (yyval.command) = (yyvsp[0].command);
+			  if (need_here_doc)
+			    gather_here_documents ();
+			 }
+#line 3113 "y.tab.c"
+    break;
+
+  case 136:
+#line 1107 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  (yyval.command) = (yyvsp[0].command);
+			}
+#line 3121 "y.tab.c"
+    break;
+
+  case 138:
+#line 1114 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  if ((yyvsp[-2].command)->type == cm_connection)
+			    (yyval.command) = connect_async_list ((yyvsp[-2].command), (COMMAND *)NULL, '&');
+			  else
+			    (yyval.command) = command_connect ((yyvsp[-2].command), (COMMAND *)NULL, '&');
+			}
+#line 3132 "y.tab.c"
+    break;
+
+  case 140:
+#line 1125 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = command_connect ((yyvsp[-3].command), (yyvsp[0].command), AND_AND); }
+#line 3138 "y.tab.c"
+    break;
+
+  case 141:
+#line 1127 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = command_connect ((yyvsp[-3].command), (yyvsp[0].command), OR_OR); }
+#line 3144 "y.tab.c"
+    break;
+
+  case 142:
+#line 1129 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  if ((yyvsp[-3].command)->type == cm_connection)
+			    (yyval.command) = connect_async_list ((yyvsp[-3].command), (yyvsp[0].command), '&');
+			  else
+			    (yyval.command) = command_connect ((yyvsp[-3].command), (yyvsp[0].command), '&');
+			}
+#line 3155 "y.tab.c"
+    break;
+
+  case 143:
+#line 1136 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = command_connect ((yyvsp[-3].command), (yyvsp[0].command), ';'); }
+#line 3161 "y.tab.c"
+    break;
+
+  case 144:
+#line 1138 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = command_connect ((yyvsp[-3].command), (yyvsp[0].command), ';'); }
+#line 3167 "y.tab.c"
+    break;
+
+  case 145:
+#line 1140 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = (yyvsp[0].command); }
+#line 3173 "y.tab.c"
+    break;
+
+  case 148:
+#line 1148 "/Users/chet/src/bash/src/parse.y"
+                { (yyval.number) = '\n'; }
+#line 3179 "y.tab.c"
+    break;
+
+  case 149:
+#line 1150 "/Users/chet/src/bash/src/parse.y"
+                { (yyval.number) = ';'; }
+#line 3185 "y.tab.c"
+    break;
+
+  case 150:
+#line 1152 "/Users/chet/src/bash/src/parse.y"
+                { (yyval.number) = yacc_EOF; }
+#line 3191 "y.tab.c"
+    break;
+
+  case 153:
+#line 1166 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  (yyval.command) = (yyvsp[0].command);
+			  if (need_here_doc)
+			    gather_here_documents ();
+			  if ((parser_state & PST_CMDSUBST) && current_token == shell_eof_token)
+			    {
+			      global_command = (yyvsp[0].command);
+			      eof_encountered = 0;
+			      rewind_input_string ();
+			      YYACCEPT;
+			    }
+			}
+#line 3208 "y.tab.c"
+    break;
+
+  case 154:
+#line 1179 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  if ((yyvsp[-1].command)->type == cm_connection)
+			    (yyval.command) = connect_async_list ((yyvsp[-1].command), (COMMAND *)NULL, '&');
+			  else
+			    (yyval.command) = command_connect ((yyvsp[-1].command), (COMMAND *)NULL, '&');
+			  if (need_here_doc)
+			    gather_here_documents ();
+			  if ((parser_state & PST_CMDSUBST) && current_token == shell_eof_token)
+			    {
+			      global_command = (yyvsp[-1].command);
+			      eof_encountered = 0;
+			      rewind_input_string ();
+			      YYACCEPT;
+			    }
+			}
+#line 3228 "y.tab.c"
+    break;
+
+  case 155:
+#line 1195 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  (yyval.command) = (yyvsp[-1].command);
+			  if (need_here_doc)
+			    gather_here_documents ();
+			  if ((parser_state & PST_CMDSUBST) && current_token == shell_eof_token)
+			    {
+			      global_command = (yyvsp[-1].command);
+			      eof_encountered = 0;
+			      rewind_input_string ();
+			      YYACCEPT;
+			    }
+			}
+#line 3245 "y.tab.c"
+    break;
+
+  case 156:
+#line 1210 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = command_connect ((yyvsp[-3].command), (yyvsp[0].command), AND_AND); }
+#line 3251 "y.tab.c"
+    break;
+
+  case 157:
+#line 1212 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = command_connect ((yyvsp[-3].command), (yyvsp[0].command), OR_OR); }
+#line 3257 "y.tab.c"
+    break;
+
+  case 158:
+#line 1214 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  if ((yyvsp[-2].command)->type == cm_connection)
+			    (yyval.command) = connect_async_list ((yyvsp[-2].command), (yyvsp[0].command), '&');
+			  else
+			    (yyval.command) = command_connect ((yyvsp[-2].command), (yyvsp[0].command), '&');
+			}
+#line 3268 "y.tab.c"
+    break;
+
+  case 159:
+#line 1221 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = command_connect ((yyvsp[-2].command), (yyvsp[0].command), ';'); }
+#line 3274 "y.tab.c"
+    break;
+
+  case 160:
+#line 1224 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = (yyvsp[0].command); }
+#line 3280 "y.tab.c"
+    break;
+
+  case 161:
+#line 1228 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = (yyvsp[0].command); }
+#line 3286 "y.tab.c"
+    break;
+
+  case 162:
+#line 1230 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  if ((yyvsp[0].command))
+			    (yyvsp[0].command)->flags ^= CMD_INVERT_RETURN;	/* toggle */
+			  (yyval.command) = (yyvsp[0].command);
+			}
+#line 3296 "y.tab.c"
+    break;
+
+  case 163:
+#line 1236 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  if ((yyvsp[0].command))
+			    (yyvsp[0].command)->flags |= (yyvsp[-1].number);
+			  (yyval.command) = (yyvsp[0].command);
+			}
+#line 3306 "y.tab.c"
+    break;
+
+  case 164:
+#line 1242 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  ELEMENT x;
+
+			  /* Boy, this is unclean.  `time' by itself can
+			     time a null command.  We cheat and push a
+			     newline back if the list_terminator was a newline
+			     to avoid the double-newline problem (one to
+			     terminate this, one to terminate the command) */
+			  x.word = 0;
+			  x.redirect = 0;
+			  (yyval.command) = make_simple_command (x, (COMMAND *)NULL);
+			  (yyval.command)->flags |= (yyvsp[-1].number);
+			  /* XXX - let's cheat and push a newline back */
+			  if ((yyvsp[0].number) == '\n')
+			    token_to_read = '\n';
+			  else if ((yyvsp[0].number) == ';')
+			    token_to_read = ';';
+			  parser_state &= ~PST_REDIRLIST;	/* make_simple_command sets this */
+			}
+#line 3330 "y.tab.c"
+    break;
+
+  case 165:
+#line 1262 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  ELEMENT x;
+
+			  /* This is just as unclean.  Posix says that `!'
+			     by itself should be equivalent to `false'.
+			     We cheat and push a
+			     newline back if the list_terminator was a newline
+			     to avoid the double-newline problem (one to
+			     terminate this, one to terminate the command) */
+			  x.word = 0;
+			  x.redirect = 0;
+			  (yyval.command) = make_simple_command (x, (COMMAND *)NULL);
+			  (yyval.command)->flags |= CMD_INVERT_RETURN;
+			  /* XXX - let's cheat and push a newline back */
+			  if ((yyvsp[0].number) == '\n')
+			    token_to_read = '\n';
+			  if ((yyvsp[0].number) == ';')
+			    token_to_read = ';';
+			  parser_state &= ~PST_REDIRLIST;	/* make_simple_command sets this */
+			}
+#line 3355 "y.tab.c"
+    break;
+
+  case 166:
+#line 1285 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = command_connect ((yyvsp[-3].command), (yyvsp[0].command), '|'); }
+#line 3361 "y.tab.c"
+    break;
+
+  case 167:
+#line 1287 "/Users/chet/src/bash/src/parse.y"
+                        {
+			  /* Make cmd1 |& cmd2 equivalent to cmd1 2>&1 | cmd2 */
+			  COMMAND *tc;
+			  REDIRECTEE rd, sd;
+			  REDIRECT *r;
+
+			  tc = (yyvsp[-3].command)->type == cm_simple ? (COMMAND *)(yyvsp[-3].command)->value.Simple : (yyvsp[-3].command);
+			  sd.dest = 2;
+			  rd.dest = 1;
+			  r = make_redirection (sd, r_duplicating_output, rd, 0);
+			  if (tc->redirects)
+			    {
+			      register REDIRECT *t;
+			      for (t = tc->redirects; t->next; t = t->next)
+				;
+			      t->next = r;
+			    }
+			  else
+			    tc->redirects = r;
+
+			  (yyval.command) = command_connect ((yyvsp[-3].command), (yyvsp[0].command), '|');
+			}
+#line 3388 "y.tab.c"
+    break;
+
+  case 168:
+#line 1310 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.command) = (yyvsp[0].command); }
+#line 3394 "y.tab.c"
+    break;
+
+  case 169:
+#line 1314 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.number) = CMD_TIME_PIPELINE; }
+#line 3400 "y.tab.c"
+    break;
+
+  case 170:
+#line 1316 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.number) = CMD_TIME_PIPELINE|CMD_TIME_POSIX; }
+#line 3406 "y.tab.c"
+    break;
+
+  case 171:
+#line 1318 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.number) = CMD_TIME_PIPELINE|CMD_TIME_POSIX; }
+#line 3412 "y.tab.c"
+    break;
+
+  case 172:
+#line 1320 "/Users/chet/src/bash/src/parse.y"
+                        { (yyval.number) = CMD_TIME_PIPELINE|CMD_TIME_POSIX; }
+#line 3418 "y.tab.c"
+    break;
+
+
+#line 3422 "y.tab.c"
+
+      default: break;
+    }
+  /* User semantic actions sometimes alter yychar, and that requires
+     that yytoken be updated with the new translation.  We take the
+     approach of translating immediately before every use of yytoken.
+     One alternative is translating here after every semantic action,
+     but that translation would be missed if the semantic action invokes
+     YYABORT, YYACCEPT, or YYERROR immediately after altering yychar or
+     if it invokes YYBACKUP.  In the case of YYABORT or YYACCEPT, an
+     incorrect destructor might then be invoked immediately.  In the
+     case of YYERROR or YYBACKUP, subsequent parser actions might lead
+     to an incorrect destructor call or verbose syntax error message
+     before the lookahead is translated.  */
+  YY_SYMBOL_PRINT ("-> $$ =", YY_CAST (yysymbol_kind_t, yyr1[yyn]), &yyval, &yyloc);
+
+  YYPOPSTACK (yylen);
+  yylen = 0;
+
+  *++yyvsp = yyval;
+
+  /* Now 'shift' the result of the reduction.  Determine what state
+     that goes to, based on the state we popped back to and the rule
+     number reduced by.  */
+  {
+    const int yylhs = yyr1[yyn] - YYNTOKENS;
+    const int yyi = yypgoto[yylhs] + *yyssp;
+    yystate = (0 <= yyi && yyi <= YYLAST && yycheck[yyi] == *yyssp
+               ? yytable[yyi]
+               : yydefgoto[yylhs]);
+  }
+
+  goto yynewstate;
+
+
+/*--------------------------------------.
+| yyerrlab -- here on detecting error.  |
+`--------------------------------------*/
+yyerrlab:
+  /* Make sure we have latest lookahead translation.  See comments at
+     user semantic actions for why this is necessary.  */
+  yytoken = yychar == YYEMPTY ? YYSYMBOL_YYEMPTY : YYTRANSLATE (yychar);
+  /* If not already recovering from an error, report this error.  */
+  if (!yyerrstatus)
+    {
+      ++yynerrs;
+      yyerror (YY_("syntax error"));
+    }
+
+  if (yyerrstatus == 3)
+    {
+      /* If just tried and failed to reuse lookahead token after an
+         error, discard it.  */
+
+      if (yychar <= YYEOF)
+        {
+          /* Return failure if at end of input.  */
+          if (yychar == YYEOF)
+            YYABORT;
+        }
+      else
+        {
+          yydestruct ("Error: discarding",
+                      yytoken, &yylval);
+          yychar = YYEMPTY;
+        }
+    }
+
+  /* Else will try to reuse lookahead token after shifting the error
+     token.  */
+  goto yyerrlab1;
+
+
+/*---------------------------------------------------.
+| yyerrorlab -- error raised explicitly by YYERROR.  |
+`---------------------------------------------------*/
+yyerrorlab:
+  /* Pacify compilers when the user code never invokes YYERROR and the
+     label yyerrorlab therefore never appears in user code.  */
+  if (0)
+    YYERROR;
+
+  /* Do not reclaim the symbols of the rule whose action triggered
+     this YYERROR.  */
+  YYPOPSTACK (yylen);
+  yylen = 0;
+  YY_STACK_PRINT (yyss, yyssp);
+  yystate = *yyssp;
+  goto yyerrlab1;
+
+
+/*-------------------------------------------------------------.
+| yyerrlab1 -- common code for both syntax error and YYERROR.  |
+`-------------------------------------------------------------*/
+yyerrlab1:
+  yyerrstatus = 3;      /* Each real token shifted decrements this.  */
+
+  /* Pop stack until we find a state that shifts the error token.  */
+  for (;;)
+    {
+      yyn = yypact[yystate];
+      if (!yypact_value_is_default (yyn))
+        {
+          yyn += YYSYMBOL_YYerror;
+          if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYSYMBOL_YYerror)
+            {
+              yyn = yytable[yyn];
+              if (0 < yyn)
+                break;
+            }
+        }
+
+      /* Pop the current state because it cannot handle the error token.  */
+      if (yyssp == yyss)
+        YYABORT;
+
+
+      yydestruct ("Error: popping",
+                  YY_ACCESSING_SYMBOL (yystate), yyvsp);
+      YYPOPSTACK (1);
+      yystate = *yyssp;
+      YY_STACK_PRINT (yyss, yyssp);
+    }
+
+  YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN
+  *++yyvsp = yylval;
+  YY_IGNORE_MAYBE_UNINITIALIZED_END
+
+
+  /* Shift the error token.  */
+  YY_SYMBOL_PRINT ("Shifting", YY_ACCESSING_SYMBOL (yyn), yyvsp, yylsp);
+
+  yystate = yyn;
+  goto yynewstate;
+
+
+/*-------------------------------------.
+| yyacceptlab -- YYACCEPT comes here.  |
+`-------------------------------------*/
+yyacceptlab:
+  yyresult = 0;
+  goto yyreturn;
+
+
+/*-----------------------------------.
+| yyabortlab -- YYABORT comes here.  |
+`-----------------------------------*/
+yyabortlab:
+  yyresult = 1;
+  goto yyreturn;
+
+
+#if !defined yyoverflow
+/*-------------------------------------------------.
+| yyexhaustedlab -- memory exhaustion comes here.  |
+`-------------------------------------------------*/
+yyexhaustedlab:
+  yyerror (YY_("memory exhausted"));
+  yyresult = 2;
+  /* Fall through.  */
+#endif
+
+
+/*-----------------------------------------------------.
+| yyreturn -- parsing is finished, return the result.  |
+`-----------------------------------------------------*/
+yyreturn:
+  if (yychar != YYEMPTY)
+    {
+      /* Make sure we have latest lookahead translation.  See comments at
+         user semantic actions for why this is necessary.  */
+      yytoken = YYTRANSLATE (yychar);
+      yydestruct ("Cleanup: discarding lookahead",
+                  yytoken, &yylval);
+    }
+  /* Do not reclaim the symbols of the rule whose action triggered
+     this YYABORT or YYACCEPT.  */
+  YYPOPSTACK (yylen);
+  YY_STACK_PRINT (yyss, yyssp);
+  while (yyssp != yyss)
+    {
+      yydestruct ("Cleanup: popping",
+                  YY_ACCESSING_SYMBOL (+*yyssp), yyvsp);
+      YYPOPSTACK (1);
+    }
+#ifndef yyoverflow
+  if (yyss != yyssa)
+    YYSTACK_FREE (yyss);
+#endif
+
+  return yyresult;
+}
+
+#line 1322 "/Users/chet/src/bash/src/parse.y"
+
+
+/* Initial size to allocate for tokens, and the
+   amount to grow them by. */
+#define TOKEN_DEFAULT_INITIAL_SIZE 496
+#define TOKEN_DEFAULT_GROW_SIZE 512
+
+/* Should we call prompt_again? */
+#define SHOULD_PROMPT() \
+  (interactive && (bash_input.type == st_stdin || bash_input.type == st_stream))
+
+#if defined (ALIAS)
+#  define expanding_alias() (pushed_string_list && pushed_string_list->expander)
+#else
+#  define expanding_alias() 0
+#endif
+
+/* Global var is non-zero when end of file has been reached. */
+int EOF_Reached = 0;
+
+#ifdef DEBUG
+static void
+debug_parser (i)
+     int i;
+{
+#if YYDEBUG != 0
+  yydebug = i;
+  yyoutstream = stdout;
+  yyerrstream = stderr;
+#endif
+}
+#endif
+
+/* yy_getc () returns the next available character from input or EOF.
+   yy_ungetc (c) makes `c' the next character to read.
+   init_yy_io (get, unget, type, location) makes the function GET the
+   installed function for getting the next character, makes UNGET the
+   installed function for un-getting a character, sets the type of stream
+   (either string or file) from TYPE, and makes LOCATION point to where
+   the input is coming from. */
+
+/* Unconditionally returns end-of-file. */
+int
+return_EOF ()
+{
+  return (EOF);
+}
+
+/* Variable containing the current get and unget functions.
+   See ./input.h for a clearer description. */
+BASH_INPUT bash_input;
+
+/* Set all of the fields in BASH_INPUT to NULL.  Free bash_input.name if it
+   is non-null, avoiding a memory leak. */
+void
+initialize_bash_input ()
+{
+  bash_input.type = st_none;
+  FREE (bash_input.name);
+  bash_input.name = (char *)NULL;
+  bash_input.location.file = (FILE *)NULL;
+  bash_input.location.string = (char *)NULL;
+  bash_input.getter = (sh_cget_func_t *)NULL;
+  bash_input.ungetter = (sh_cunget_func_t *)NULL;
+}
+
+/* Set the contents of the current bash input stream from
+   GET, UNGET, TYPE, NAME, and LOCATION. */
+void
+init_yy_io (get, unget, type, name, location)
+     sh_cget_func_t *get;
+     sh_cunget_func_t *unget;
+     enum stream_type type;
+     const char *name;
+     INPUT_STREAM location;
+{
+  bash_input.type = type;
+  FREE (bash_input.name);
+  bash_input.name = name ? savestring (name) : (char *)NULL;
+
+  /* XXX */
+#if defined (CRAY)
+  memcpy((char *)&bash_input.location.string, (char *)&location.string, sizeof(location));
+#else
+  bash_input.location = location;
+#endif
+  bash_input.getter = get;
+  bash_input.ungetter = unget;
+}
+
+char *
+yy_input_name ()
+{
+  return (bash_input.name ? bash_input.name : "stdin");
+}
+
+/* Call this to get the next character of input. */
+static int
+yy_getc ()
+{
+  return (*(bash_input.getter)) ();
+}
+
+/* Call this to unget C.  That is, to make C the next character
+   to be read. */
+static int
+yy_ungetc (c)
+     int c;
+{
+  return (*(bash_input.ungetter)) (c);
+}
+
+#if defined (BUFFERED_INPUT)
+#ifdef INCLUDE_UNUSED
+int
+input_file_descriptor ()
+{
+  switch (bash_input.type)
+    {
+    case st_stream:
+      return (fileno (bash_input.location.file));
+    case st_bstream:
+      return (bash_input.location.buffered_fd);
+    case st_stdin:
+    default:
+      return (fileno (stdin));
+    }
+}
+#endif
+#endif /* BUFFERED_INPUT */
+
+/* **************************************************************** */
+/*								    */
+/*		  Let input be read from readline ().		    */
+/*								    */
+/* **************************************************************** */
+
+#if defined (READLINE)
+char *current_readline_prompt = (char *)NULL;
+char *current_readline_line = (char *)NULL;
+int current_readline_line_index = 0;
+
+static int
+yy_readline_get ()
+{
+  SigHandler *old_sigint;
+  int line_len;
+  unsigned char c;
+
+  if (current_readline_line == 0)
+    {
+      if (bash_readline_initialized == 0)
+	initialize_readline ();
+
+#if defined (JOB_CONTROL)
+      if (job_control)
+	give_terminal_to (shell_pgrp, 0);
+#endif /* JOB_CONTROL */
+
+      old_sigint = IMPOSSIBLE_TRAP_HANDLER;
+      if (signal_is_ignored (SIGINT) == 0)
+	{
+	  old_sigint = (SigHandler *)set_signal_handler (SIGINT, sigint_sighandler);
+	}
+
+      sh_unset_nodelay_mode (fileno (rl_instream));	/* just in case */
+      current_readline_line = readline (current_readline_prompt ?
+      					  current_readline_prompt : "");
+
+      CHECK_TERMSIG;
+      if (signal_is_ignored (SIGINT) == 0)
+	{
+	  if (old_sigint != IMPOSSIBLE_TRAP_HANDLER)
+	    set_signal_handler (SIGINT, old_sigint);
+	}
+
+#if 0
+      /* Reset the prompt to the decoded value of prompt_string_pointer. */
+      reset_readline_prompt ();
+#endif
+
+      if (current_readline_line == 0)
+	return (EOF);
+
+      current_readline_line_index = 0;
+      line_len = strlen (current_readline_line);
+
+      current_readline_line = (char *)xrealloc (current_readline_line, 2 + line_len);
+      current_readline_line[line_len++] = '\n';
+      current_readline_line[line_len] = '\0';
+    }
+
+  if (current_readline_line[current_readline_line_index] == 0)
+    {
+      free (current_readline_line);
+      current_readline_line = (char *)NULL;
+      return (yy_readline_get ());
+    }
+  else
+    {
+      c = current_readline_line[current_readline_line_index++];
+      return (c);
+    }
+}
+
+static int
+yy_readline_unget (c)
+     int c;
+{
+  if (current_readline_line_index && current_readline_line)
+    current_readline_line[--current_readline_line_index] = c;
+  return (c);
+}
+
+void
+with_input_from_stdin ()
+{
+  INPUT_STREAM location;
+
+  if (bash_input.type != st_stdin && stream_on_stack (st_stdin) == 0)
+    {
+      location.string = current_readline_line;
+      init_yy_io (yy_readline_get, yy_readline_unget,
+		  st_stdin, "readline stdin", location);
+    }
+}
+
+/* Will we be collecting another input line and printing a prompt? This uses
+   different conditions than SHOULD_PROMPT(), since readline allows a user to
+   embed a newline in the middle of the line it collects, which the parser
+   will interpret as a line break and command delimiter. */
+int
+parser_will_prompt ()
+{
+  return (current_readline_line == 0 || current_readline_line[current_readline_line_index] == 0);
+}
+  
+#else  /* !READLINE */
+
+void
+with_input_from_stdin ()
+{
+  with_input_from_stream (stdin, "stdin");
+}
+#endif	/* !READLINE */
+
+/* **************************************************************** */
+/*								    */
+/*   Let input come from STRING.  STRING is zero terminated.	    */
+/*								    */
+/* **************************************************************** */
+
+static int
+yy_string_get ()
+{
+  register char *string;
+  register unsigned char c;
+
+  string = bash_input.location.string;
+
+  /* If the string doesn't exist, or is empty, EOF found. */
+  if (string && *string)
+    {
+      c = *string++;
+      bash_input.location.string = string;
+      return (c);
+    }
+  else
+    return (EOF);
+}
+
+static int
+yy_string_unget (c)
+     int c;
+{
+  *(--bash_input.location.string) = c;
+  return (c);
+}
+
+void
+with_input_from_string (string, name)
+     char *string;
+     const char *name;
+{
+  INPUT_STREAM location;
+
+  location.string = string;
+  init_yy_io (yy_string_get, yy_string_unget, st_string, name, location);
+}
+
+/* Count the number of characters we've consumed from bash_input.location.string
+   and read into shell_input_line, but have not returned from shell_getc.
+   That is the true input location.  Rewind bash_input.location.string by
+   that number of characters, so it points to the last character actually
+   consumed by the parser. */
+static void
+rewind_input_string ()
+{
+  int xchars;
+
+  /* number of unconsumed characters in the input -- XXX need to take newlines
+     into account, e.g., $(...\n) */
+  xchars = shell_input_line_len - shell_input_line_index;
+  if (bash_input.location.string[-1] == '\n')
+    xchars++;
+
+  /* XXX - how to reflect bash_input.location.string back to string passed to
+     parse_and_execute or xparse_dolparen?  xparse_dolparen needs to know how
+     far into the string we parsed.  parse_and_execute knows where bash_input.
+     location.string is, and how far from orig_string that is -- that's the
+     number of characters the command consumed. */
+
+  /* bash_input.location.string - xchars should be where we parsed to */
+  /* need to do more validation on xchars value for sanity -- test cases. */
+  bash_input.location.string -= xchars;
+}
+
+/* **************************************************************** */
+/*								    */
+/*		     Let input come from STREAM.		    */
+/*								    */
+/* **************************************************************** */
+
+/* These two functions used to test the value of the HAVE_RESTARTABLE_SYSCALLS
+   define, and just use getc/ungetc if it was defined, but since bash
+   installs most of its signal handlers without the SA_RESTART flag, some
+   signals received during a read(2) will not cause the read to be restarted.
+   We will need to restart it ourselves. */
+
+static int
+yy_stream_get ()
+{
+  int result;
+
+  result = EOF;
+  if (bash_input.location.file)
+    {
+      /* XXX - don't need terminate_immediately; getc_with_restart checks
+	 for terminating signals itself if read returns < 0 */
+      result = getc_with_restart (bash_input.location.file);
+    }
+  return (result);
+}
+
+static int
+yy_stream_unget (c)
+     int c;
+{
+  return (ungetc_with_restart (c, bash_input.location.file));
+}
+
+void
+with_input_from_stream (stream, name)
+     FILE *stream;
+     const char *name;
+{
+  INPUT_STREAM location;
+
+  location.file = stream;
+  init_yy_io (yy_stream_get, yy_stream_unget, st_stream, name, location);
+}
+
+typedef struct stream_saver {
+  struct stream_saver *next;
+  BASH_INPUT bash_input;
+  int line;
+#if defined (BUFFERED_INPUT)
+  BUFFERED_STREAM *bstream;
+#endif /* BUFFERED_INPUT */
+} STREAM_SAVER;
+
+/* The globally known line number. */
+int line_number = 0;
+
+/* The line number offset set by assigning to LINENO.  Not currently used. */
+int line_number_base = 0;
+
+#if defined (COND_COMMAND)
+static int cond_lineno;
+static int cond_token;
+#endif
+
+STREAM_SAVER *stream_list = (STREAM_SAVER *)NULL;
+
+void
+push_stream (reset_lineno)
+     int reset_lineno;
+{
+  STREAM_SAVER *saver = (STREAM_SAVER *)xmalloc (sizeof (STREAM_SAVER));
+
+  xbcopy ((char *)&bash_input, (char *)&(saver->bash_input), sizeof (BASH_INPUT));
+
+#if defined (BUFFERED_INPUT)
+  saver->bstream = (BUFFERED_STREAM *)NULL;
+  /* If we have a buffered stream, clear out buffers[fd]. */
+  if (bash_input.type == st_bstream && bash_input.location.buffered_fd >= 0)
+    saver->bstream = set_buffered_stream (bash_input.location.buffered_fd,
+    					  (BUFFERED_STREAM *)NULL);
+#endif /* BUFFERED_INPUT */
+
+  saver->line = line_number;
+  bash_input.name = (char *)NULL;
+  saver->next = stream_list;
+  stream_list = saver;
+  EOF_Reached = 0;
+  if (reset_lineno)
+    line_number = 0;
+}
+
+void
+pop_stream ()
+{
+  if (!stream_list)
+    EOF_Reached = 1;
+  else
+    {
+      STREAM_SAVER *saver = stream_list;
+
+      EOF_Reached = 0;
+      stream_list = stream_list->next;
+
+      init_yy_io (saver->bash_input.getter,
+		  saver->bash_input.ungetter,
+		  saver->bash_input.type,
+		  saver->bash_input.name,
+		  saver->bash_input.location);
+
+#if defined (BUFFERED_INPUT)
+      /* If we have a buffered stream, restore buffers[fd]. */
+      /* If the input file descriptor was changed while this was on the
+	 save stack, update the buffered fd to the new file descriptor and
+	 re-establish the buffer <-> bash_input fd correspondence. */
+      if (bash_input.type == st_bstream && bash_input.location.buffered_fd >= 0)
+	{
+	  if (bash_input_fd_changed)
+	    {
+	      bash_input_fd_changed = 0;
+	      if (default_buffered_input >= 0)
+		{
+		  bash_input.location.buffered_fd = default_buffered_input;
+		  saver->bstream->b_fd = default_buffered_input;
+		  SET_CLOSE_ON_EXEC (default_buffered_input);
+		}
+	    }
+	  /* XXX could free buffered stream returned as result here. */
+	  set_buffered_stream (bash_input.location.buffered_fd, saver->bstream);
+	}
+#endif /* BUFFERED_INPUT */
+
+      line_number = saver->line;
+
+      FREE (saver->bash_input.name);
+      free (saver);
+    }
+}
+
+/* Return 1 if a stream of type TYPE is saved on the stack. */
+int
+stream_on_stack (type)
+     enum stream_type type;
+{
+  register STREAM_SAVER *s;
+
+  for (s = stream_list; s; s = s->next)
+    if (s->bash_input.type == type)
+      return 1;
+  return 0;
+}
+
+/* Save the current token state and return it in a malloced array. */
+int *
+save_token_state ()
+{
+  int *ret;
+
+  ret = (int *)xmalloc (4 * sizeof (int));
+  ret[0] = last_read_token;
+  ret[1] = token_before_that;
+  ret[2] = two_tokens_ago;
+  ret[3] = current_token;
+  return ret;
+}
+
+void
+restore_token_state (ts)
+     int *ts;
+{
+  if (ts == 0)
+    return;
+  last_read_token = ts[0];
+  token_before_that = ts[1];
+  two_tokens_ago = ts[2];
+  current_token = ts[3];
+}
+
+/*
+ * This is used to inhibit alias expansion and reserved word recognition
+ * inside case statement pattern lists.  A `case statement pattern list' is:
+ *
+ *	everything between the `in' in a `case word in' and the next ')'
+ *	or `esac'
+ *	everything between a `;;' and the next `)' or `esac'
+ */
+
+#if defined (ALIAS) || defined (DPAREN_ARITHMETIC)
+
+#define END_OF_ALIAS 0
+
+/*
+ * Pseudo-global variables used in implementing token-wise alias expansion.
+ */
+
+/*
+ * Pushing and popping strings.  This works together with shell_getc to
+ * implement alias expansion on a per-token basis.
+ */
+
+#define PSH_ALIAS	0x01
+#define PSH_DPAREN	0x02
+#define PSH_SOURCE	0x04
+#define PSH_ARRAY	0x08
+
+typedef struct string_saver {
+  struct string_saver *next;
+  int expand_alias;  /* Value to set expand_alias to when string is popped. */
+  char *saved_line;
+#if defined (ALIAS)
+  alias_t *expander;   /* alias that caused this line to be pushed. */
+#endif
+  size_t saved_line_size, saved_line_index;
+  int saved_line_terminator;
+  int flags;
+} STRING_SAVER;
+
+STRING_SAVER *pushed_string_list = (STRING_SAVER *)NULL;
+
+/*
+ * Push the current shell_input_line onto a stack of such lines and make S
+ * the current input.  Used when expanding aliases.  EXPAND is used to set
+ * the value of expand_next_token when the string is popped, so that the
+ * word after the alias in the original line is handled correctly when the
+ * alias expands to multiple words.  TOKEN is the token that was expanded
+ * into S; it is saved and used to prevent infinite recursive expansion.
+ */
+static void
+push_string (s, expand, ap)
+     char *s;
+     int expand;
+     alias_t *ap;
+{
+  STRING_SAVER *temp = (STRING_SAVER *)xmalloc (sizeof (STRING_SAVER));
+
+  temp->expand_alias = expand;
+  temp->saved_line = shell_input_line;
+  temp->saved_line_size = shell_input_line_size;
+  temp->saved_line_index = shell_input_line_index;
+  temp->saved_line_terminator = shell_input_line_terminator;
+  temp->flags = 0;
+#if defined (ALIAS)
+  temp->expander = ap;
+  if (ap)
+    temp->flags = PSH_ALIAS;
+#endif
+  temp->next = pushed_string_list;
+  pushed_string_list = temp;
+
+#if defined (ALIAS)
+  if (ap)
+    ap->flags |= AL_BEINGEXPANDED;
+#endif
+
+  shell_input_line = s;
+  shell_input_line_size = STRLEN (s);
+  shell_input_line_index = 0;
+  shell_input_line_terminator = '\0';
+#if 0
+  parser_state &= ~PST_ALEXPNEXT;	/* XXX */
+#endif
+
+  set_line_mbstate ();
+}
+
+/*
+ * Make the top of the pushed_string stack be the current shell input.
+ * Only called when there is something on the stack.  Called from shell_getc
+ * when it thinks it has consumed the string generated by an alias expansion
+ * and needs to return to the original input line.
+ */
+static void
+pop_string ()
+{
+  STRING_SAVER *t;
+
+  FREE (shell_input_line);
+  shell_input_line = pushed_string_list->saved_line;
+  shell_input_line_index = pushed_string_list->saved_line_index;
+  shell_input_line_size = pushed_string_list->saved_line_size;
+  shell_input_line_terminator = pushed_string_list->saved_line_terminator;
+
+  if (pushed_string_list->expand_alias)
+    parser_state |= PST_ALEXPNEXT;
+  else
+    parser_state &= ~PST_ALEXPNEXT;
+
+  t = pushed_string_list;
+  pushed_string_list = pushed_string_list->next;
+
+#if defined (ALIAS)
+  if (t->expander)
+    t->expander->flags &= ~AL_BEINGEXPANDED;
+#endif
+
+  free ((char *)t);
+
+  set_line_mbstate ();
+}
+
+static void
+free_string_list ()
+{
+  register STRING_SAVER *t, *t1;
+
+  for (t = pushed_string_list; t; )
+    {
+      t1 = t->next;
+      FREE (t->saved_line);
+#if defined (ALIAS)
+      if (t->expander)
+	t->expander->flags &= ~AL_BEINGEXPANDED;
+#endif
+      free ((char *)t);
+      t = t1;
+    }
+  pushed_string_list = (STRING_SAVER *)NULL;
+}
+
+#endif /* ALIAS || DPAREN_ARITHMETIC */
+
+void
+free_pushed_string_input ()
+{
+#if defined (ALIAS) || defined (DPAREN_ARITHMETIC)
+  free_string_list ();
+#endif
+}
+
+int
+parser_expanding_alias ()
+{
+  return (expanding_alias ());
+}
+
+void
+parser_save_alias ()
+{
+#if defined (ALIAS) || defined (DPAREN_ARITHMETIC)
+  push_string ((char *)NULL, 0, (alias_t *)NULL);
+  pushed_string_list->flags = PSH_SOURCE;	/* XXX - for now */
+#else
+  ;
+#endif
+}
+
+void
+parser_restore_alias ()
+{
+#if defined (ALIAS) || defined (DPAREN_ARITHMETIC)
+  if (pushed_string_list)
+    pop_string ();
+#else
+  ;
+#endif
+}
+
+#if defined (ALIAS)
+/* Before freeing AP, make sure that there aren't any cases of pointer
+   aliasing that could cause us to reference freed memory later on. */
+void
+clear_string_list_expander (ap)
+     alias_t *ap;
+{
+  register STRING_SAVER *t;
+
+  for (t = pushed_string_list; t; t = t->next)
+    {
+      if (t->expander && t->expander == ap)
+	t->expander = 0;
+    }
+}
+#endif
+
+void
+clear_shell_input_line ()
+{
+  if (shell_input_line)
+    shell_input_line[shell_input_line_index = 0] = '\0';
+}
+
+/* Return a line of text, taken from wherever yylex () reads input.
+   If there is no more input, then we return NULL.  If REMOVE_QUOTED_NEWLINE
+   is non-zero, we remove unquoted \<newline> pairs.  This is used by
+   read_secondary_line to read here documents. */
+static char *
+read_a_line (remove_quoted_newline)
+     int remove_quoted_newline;
+{
+  static char *line_buffer = (char *)NULL;
+  static int buffer_size = 0;
+  int indx, c, peekc, pass_next;
+
+#if defined (READLINE)
+  if (no_line_editing && SHOULD_PROMPT ())
+#else
+  if (SHOULD_PROMPT ())
+#endif
+    print_prompt ();
+
+  pass_next = indx = 0;
+  while (1)
+    {
+      /* Allow immediate exit if interrupted during input. */
+      QUIT;
+
+      c = yy_getc ();
+
+      /* Ignore null bytes in input. */
+      if (c == 0)
+	{
+#if 0
+	  internal_warning ("read_a_line: ignored null byte in input");
+#endif
+	  continue;
+	}
+
+      /* If there is no more input, then we return NULL. */
+      if (c == EOF)
+	{
+	  if (interactive && bash_input.type == st_stream)
+	    clearerr (stdin);
+	  if (indx == 0)
+	    return ((char *)NULL);
+	  c = '\n';
+	}
+
+      /* `+2' in case the final character in the buffer is a newline or we
+	 have to handle CTLESC or CTLNUL. */
+      RESIZE_MALLOCED_BUFFER (line_buffer, indx, 2, buffer_size, 128);
+
+      /* IF REMOVE_QUOTED_NEWLINES is non-zero, we are reading a
+	 here document with an unquoted delimiter.  In this case,
+	 the line will be expanded as if it were in double quotes.
+	 We allow a backslash to escape the next character, but we
+	 need to treat the backslash specially only if a backslash
+	 quoting a backslash-newline pair appears in the line. */
+      if (pass_next)
+	{
+	  line_buffer[indx++] = c;
+	  pass_next = 0;
+	}
+      else if (c == '\\' && remove_quoted_newline)
+	{
+	  QUIT;
+	  peekc = yy_getc ();
+	  if (peekc == '\n')
+	    {
+	      line_number++;
+	      continue;	/* Make the unquoted \<newline> pair disappear. */
+	    }
+	  else
+	    {
+	      yy_ungetc (peekc);
+	      pass_next = 1;
+	      line_buffer[indx++] = c;		/* Preserve the backslash. */
+	    }
+	}
+      else
+	{
+	  /* remove_quoted_newline is non-zero if the here-document delimiter
+	     is unquoted. In this case, we will be expanding the lines and
+	     need to make sure CTLESC and CTLNUL in the input are quoted. */
+	  if (remove_quoted_newline && (c == CTLESC || c == CTLNUL))
+	    line_buffer[indx++] = CTLESC;
+	  line_buffer[indx++] = c;
+	}
+
+      if (c == '\n')
+	{
+	  line_buffer[indx] = '\0';
+	  return (line_buffer);
+	}
+    }
+}
+
+/* Return a line as in read_a_line (), but insure that the prompt is
+   the secondary prompt.  This is used to read the lines of a here
+   document.  REMOVE_QUOTED_NEWLINE is non-zero if we should remove
+   newlines quoted with backslashes while reading the line.  It is
+   non-zero unless the delimiter of the here document was quoted. */
+char *
+read_secondary_line (remove_quoted_newline)
+     int remove_quoted_newline;
+{
+  char *ret;
+  int n, c;
+
+  prompt_string_pointer = &ps2_prompt;
+  if (SHOULD_PROMPT())
+    prompt_again ();
+  ret = read_a_line (remove_quoted_newline);
+#if defined (HISTORY)
+  if (ret && remember_on_history && (parser_state & PST_HEREDOC))
+    {
+      /* To make adding the here-document body right, we need to rely on
+	 history_delimiting_chars() returning \n for the first line of the
+	 here-document body and the null string for the second and subsequent
+	 lines, so we avoid double newlines.
+	 current_command_line_count == 2 for the first line of the body. */
+
+      current_command_line_count++;
+      maybe_add_history (ret);
+    }
+#endif /* HISTORY */
+  return ret;
+}
+
+/* **************************************************************** */
+/*								    */
+/*				YYLEX ()			    */
+/*								    */
+/* **************************************************************** */
+
+/* Reserved words.  These are only recognized as the first word of a
+   command. */
+STRING_INT_ALIST word_token_alist[] = {
+  { "if", IF },
+  { "then", THEN },
+  { "else", ELSE },
+  { "elif", ELIF },
+  { "fi", FI },
+  { "case", CASE },
+  { "esac", ESAC },
+  { "for", FOR },
+#if defined (SELECT_COMMAND)
+  { "select", SELECT },
+#endif
+  { "while", WHILE },
+  { "until", UNTIL },
+  { "do", DO },
+  { "done", DONE },
+  { "in", IN },
+  { "function", FUNCTION },
+#if defined (COMMAND_TIMING)
+  { "time", TIME },
+#endif
+  { "{", '{' },
+  { "}", '}' },
+  { "!", BANG },
+#if defined (COND_COMMAND)
+  { "[[", COND_START },
+  { "]]", COND_END },
+#endif
+#if defined (COPROCESS_SUPPORT)
+  { "coproc", COPROC },
+#endif
+  { (char *)NULL, 0}
+};
+
+/* other tokens that can be returned by read_token() */
+STRING_INT_ALIST other_token_alist[] = {
+  /* Multiple-character tokens with special values */
+  { "--", TIMEIGN },
+  { "-p", TIMEOPT },
+  { "&&", AND_AND },
+  { "||", OR_OR },
+  { ">>", GREATER_GREATER },
+  { "<<", LESS_LESS },
+  { "<&", LESS_AND },
+  { ">&", GREATER_AND },
+  { ";;", SEMI_SEMI },
+  { ";&", SEMI_AND },
+  { ";;&", SEMI_SEMI_AND },
+  { "<<-", LESS_LESS_MINUS },
+  { "<<<", LESS_LESS_LESS },
+  { "&>", AND_GREATER },
+  { "&>>", AND_GREATER_GREATER },
+  { "<>", LESS_GREATER },
+  { ">|", GREATER_BAR },
+  { "|&", BAR_AND },
+  { "EOF", yacc_EOF },
+  /* Tokens whose value is the character itself */
+  { ">", '>' },
+  { "<", '<' },
+  { "-", '-' },
+  { "{", '{' },
+  { "}", '}' },
+  { ";", ';' },
+  { "(", '(' },
+  { ")", ')' },
+  { "|", '|' },
+  { "&", '&' },
+  { "newline", '\n' },
+  { (char *)NULL, 0}
+};
+
+/* others not listed here:
+	WORD			look at yylval.word
+	ASSIGNMENT_WORD		look at yylval.word
+	NUMBER			look at yylval.number
+	ARITH_CMD		look at yylval.word_list
+	ARITH_FOR_EXPRS		look at yylval.word_list
+	COND_CMD		look at yylval.command
+*/
+
+/* These are used by read_token_word, but appear up here so that shell_getc
+   can use them to decide when to add otherwise blank lines to the history. */
+
+/* The primary delimiter stack. */
+struct dstack dstack = {  (char *)NULL, 0, 0 };
+
+/* A temporary delimiter stack to be used when decoding prompt strings.
+   This is needed because command substitutions in prompt strings (e.g., PS2)
+   can screw up the parser's quoting state. */
+static struct dstack temp_dstack = { (char *)NULL, 0, 0 };
+
+/* Macro for accessing the top delimiter on the stack.  Returns the
+   delimiter or zero if none. */
+#define current_delimiter(ds) \
+  (ds.delimiter_depth ? ds.delimiters[ds.delimiter_depth - 1] : 0)
+
+#define push_delimiter(ds, character) \
+  do \
+    { \
+      if (ds.delimiter_depth + 2 > ds.delimiter_space) \
+	ds.delimiters = (char *)xrealloc \
+	  (ds.delimiters, (ds.delimiter_space += 10) * sizeof (char)); \
+      ds.delimiters[ds.delimiter_depth] = character; \
+      ds.delimiter_depth++; \
+    } \
+  while (0)
+
+#define pop_delimiter(ds)	ds.delimiter_depth--
+
+/* Return the next shell input character.  This always reads characters
+   from shell_input_line; when that line is exhausted, it is time to
+   read the next line.  This is called by read_token when the shell is
+   processing normal command input. */
+
+/* This implements one-character lookahead/lookbehind across physical input
+   lines, to avoid something being lost because it's pushed back with
+   shell_ungetc when we're at the start of a line. */
+static int eol_ungetc_lookahead = 0;
+
+static int unquoted_backslash = 0;
+
+static int
+shell_getc (remove_quoted_newline)
+     int remove_quoted_newline;
+{
+  register int i;
+  int c, truncating, last_was_backslash;
+  unsigned char uc;
+
+  QUIT;
+
+  last_was_backslash = 0;
+  if (sigwinch_received)
+    {
+      sigwinch_received = 0;
+      get_new_window_size (0, (int *)0, (int *)0);
+    }
+      
+  if (eol_ungetc_lookahead)
+    {
+      c = eol_ungetc_lookahead;
+      eol_ungetc_lookahead = 0;
+      return (c);
+    }
+
+#if defined (ALIAS) || defined (DPAREN_ARITHMETIC)
+  /* If shell_input_line[shell_input_line_index] == 0, but there is
+     something on the pushed list of strings, then we don't want to go
+     off and get another line.  We let the code down below handle it. */
+
+  if (!shell_input_line || ((!shell_input_line[shell_input_line_index]) &&
+			    (pushed_string_list == (STRING_SAVER *)NULL)))
+#else /* !ALIAS && !DPAREN_ARITHMETIC */
+  if (!shell_input_line || !shell_input_line[shell_input_line_index])
+#endif /* !ALIAS && !DPAREN_ARITHMETIC */
+    {
+      line_number++;
+
+      /* Let's not let one really really long line blow up memory allocation */
+      if (shell_input_line && shell_input_line_size >= 32768)
+	{
+	  free (shell_input_line);
+	  shell_input_line = 0;
+	  shell_input_line_size = 0;
+	}
+
+    restart_read:
+
+      /* Allow immediate exit if interrupted during input. */
+      QUIT;
+
+      i = truncating = 0;
+      shell_input_line_terminator = 0;
+
+      /* If the shell is interactive, but not currently printing a prompt
+         (interactive_shell && interactive == 0), we don't want to print
+         notifies or cleanup the jobs -- we want to defer it until we do
+         print the next prompt. */
+      if (interactive_shell == 0 || SHOULD_PROMPT())
+	{
+#if defined (JOB_CONTROL)
+      /* This can cause a problem when reading a command as the result
+	 of a trap, when the trap is called from flush_child.  This call
+	 had better not cause jobs to disappear from the job table in
+	 that case, or we will have big trouble. */
+	  notify_and_cleanup ();
+#else /* !JOB_CONTROL */
+	  cleanup_dead_jobs ();
+#endif /* !JOB_CONTROL */
+	}
+
+#if defined (READLINE)
+      if (no_line_editing && SHOULD_PROMPT())
+#else
+      if (SHOULD_PROMPT())
+#endif
+	print_prompt ();
+
+      if (bash_input.type == st_stream)
+	clearerr (stdin);
+
+      while (1)
+	{
+	  c = yy_getc ();
+
+	  /* Allow immediate exit if interrupted during input. */
+	  QUIT;
+
+	  if (c == '\0')
+	    {
+#if 0
+	      internal_warning ("shell_getc: ignored null byte in input");
+#endif
+	      /* If we get EOS while parsing a string, treat it as EOF so we
+		 don't just keep looping. Happens very rarely */
+	      if (bash_input.type == st_string)
+		{
+		  if (i == 0)
+		    shell_input_line_terminator = EOF;
+		  shell_input_line[i] = '\0';
+		  c = EOF;
+		  break;
+		}
+	      continue;
+	    }
+
+	  /* Theoretical overflow */
+	  /* If we can't put 256 bytes more into the buffer, allocate
+	     everything we can and fill it as full as we can. */
+	  /* XXX - we ignore rest of line using `truncating' flag */
+	  if (shell_input_line_size > (SIZE_MAX - 256))
+	    {
+	      size_t n;
+
+	      n = SIZE_MAX - i;	/* how much more can we put into the buffer? */
+	      if (n <= 2)	/* we have to save 1 for the newline added below */
+		{
+		  if (truncating == 0)
+		    internal_warning(_("shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line truncated"), shell_input_line_size, (unsigned long)SIZE_MAX);
+		  shell_input_line[i] = '\0';
+		  truncating = 1;
+		}
+	      if (shell_input_line_size < SIZE_MAX)
+		{
+		  shell_input_line_size = SIZE_MAX;
+		  shell_input_line = xrealloc (shell_input_line, shell_input_line_size);
+		}
+	    }
+	  else
+	    RESIZE_MALLOCED_BUFFER (shell_input_line, i, 2, shell_input_line_size, 256);
+
+	  if (c == EOF)
+	    {
+	      if (bash_input.type == st_stream)
+		clearerr (stdin);
+
+	      if (i == 0)
+		shell_input_line_terminator = EOF;
+
+	      shell_input_line[i] = '\0';
+	      break;
+	    }
+
+	  if (truncating == 0 || c == '\n')
+	    shell_input_line[i++] = c;
+
+	  if (c == '\n')
+	    {
+	      shell_input_line[--i] = '\0';
+	      current_command_line_count++;
+	      break;
+	    }
+
+	  last_was_backslash = last_was_backslash == 0 && c == '\\';
+	}
+
+      shell_input_line_index = 0;
+      shell_input_line_len = i;		/* == strlen (shell_input_line) */
+
+      set_line_mbstate ();
+
+#if defined (HISTORY)
+      if (remember_on_history && shell_input_line && shell_input_line[0])
+	{
+	  char *expansions;
+#  if defined (BANG_HISTORY)
+	  /* If the current delimiter is a single quote, we should not be
+	     performing history expansion, even if we're on a different
+	     line from the original single quote. */
+	  if (current_delimiter (dstack) == '\'')
+	    history_quoting_state = '\'';
+	  else if (current_delimiter (dstack) == '"')
+	    history_quoting_state = '"';
+	  else
+	    history_quoting_state = 0;
+#  endif
+	  /* Calling with a third argument of 1 allows remember_on_history to
+	     determine whether or not the line is saved to the history list */
+	  expansions = pre_process_line (shell_input_line, 1, 1);
+#  if defined (BANG_HISTORY)
+	  history_quoting_state = 0;
+#  endif
+	  if (expansions != shell_input_line)
+	    {
+	      free (shell_input_line);
+	      shell_input_line = expansions;
+	      shell_input_line_len = shell_input_line ?
+					strlen (shell_input_line) : 0;
+	      if (shell_input_line_len == 0)
+		current_command_line_count--;
+
+	      /* We have to force the xrealloc below because we don't know
+		 the true allocated size of shell_input_line anymore. */
+	      shell_input_line_size = shell_input_line_len;
+
+	      set_line_mbstate ();
+	    }
+	}
+      /* Try to do something intelligent with blank lines encountered while
+	 entering multi-line commands.  XXX - this is grotesque */
+      else if (remember_on_history && shell_input_line &&
+	       shell_input_line[0] == '\0' &&
+	       current_command_line_count > 1)
+	{
+	  if (current_delimiter (dstack))
+	    /* We know shell_input_line[0] == 0 and we're reading some sort of
+	       quoted string.  This means we've got a line consisting of only
+	       a newline in a quoted string.  We want to make sure this line
+	       gets added to the history. */
+	    maybe_add_history (shell_input_line);
+	  else
+	    {
+	      char *hdcs;
+	      hdcs = history_delimiting_chars (shell_input_line);
+	      if (hdcs && hdcs[0] == ';')
+		maybe_add_history (shell_input_line);
+	    }
+	}
+
+#endif /* HISTORY */
+
+      if (shell_input_line)
+	{
+	  /* Lines that signify the end of the shell's input should not be
+	     echoed.  We should not echo lines while parsing command
+	     substitutions with recursive calls into the parsing engine; those
+	     should only be echoed once when we read the word.  That is the
+	     reason for the test against shell_eof_token, which is set to a
+	     right paren when parsing the contents of command substitutions. */
+	  if (echo_input_at_read && (shell_input_line[0] ||
+				       shell_input_line_terminator != EOF) &&
+				     shell_eof_token == 0)
+	    fprintf (stderr, "%s\n", shell_input_line);
+	}
+      else
+	{
+	  shell_input_line_size = 0;
+	  prompt_string_pointer = &current_prompt_string;
+	  if (SHOULD_PROMPT ())
+	    prompt_again ();
+	  goto restart_read;
+	}
+
+      /* Add the newline to the end of this string, iff the string does
+	 not already end in an EOF character.  */
+      if (shell_input_line_terminator != EOF)
+	{
+	  if (shell_input_line_size < SIZE_MAX-3 && (shell_input_line_len+3 > shell_input_line_size))
+	    shell_input_line = (char *)xrealloc (shell_input_line,
+					1 + (shell_input_line_size += 2));
+
+	  /* Don't add a newline to a string that ends with a backslash if we're
+	     going to be removing quoted newlines, since that will eat the
+	     backslash.  Add another backslash instead (will be removed by
+	     word expansion). */
+	  if (bash_input.type == st_string && expanding_alias() == 0 && last_was_backslash && c == EOF && remove_quoted_newline)
+	    shell_input_line[shell_input_line_len] = '\\';
+	  else
+	    shell_input_line[shell_input_line_len] = '\n';
+	  shell_input_line[shell_input_line_len + 1] = '\0';
+
+#if 0
+	  set_line_mbstate ();		/* XXX - this is wasteful */
+#else
+#  if defined (HANDLE_MULTIBYTE)
+	  /* This is kind of an abstraction violation, but there's no need to
+	     go through the entire shell_input_line again with a call to
+	     set_line_mbstate(). */
+	  if (shell_input_line_len + 2 > shell_input_line_propsize)
+	    {
+	      shell_input_line_propsize = shell_input_line_len + 2;
+	      shell_input_line_property = (char *)xrealloc (shell_input_line_property,
+							    shell_input_line_propsize);
+	    }
+	  shell_input_line_property[shell_input_line_len] = 1;
+#  endif
+#endif
+	}
+    }
+
+next_alias_char:
+  if (shell_input_line_index == 0)
+    unquoted_backslash = 0;
+
+  uc = shell_input_line[shell_input_line_index];
+
+  if (uc)
+    {
+      unquoted_backslash = unquoted_backslash == 0 && uc == '\\';
+      shell_input_line_index++;
+    }
+
+#if defined (ALIAS) || defined (DPAREN_ARITHMETIC)
+  /* If UC is NULL, we have reached the end of the current input string.  If
+     pushed_string_list is non-empty, it's time to pop to the previous string
+     because we have fully consumed the result of the last alias expansion.
+     Do it transparently; just return the next character of the string popped
+     to. */
+  /* If pushed_string_list != 0 but pushed_string_list->expander == 0 (not
+     currently tested) and the flags value is not PSH_SOURCE, we are not
+     parsing an alias, we have just saved one (push_string, when called by
+     the parse_dparen code) In this case, just go on as well.  The PSH_SOURCE
+     case is handled below. */
+
+  /* If we're at the end of an alias expansion add a space to make sure that
+     the alias remains marked as being in use while we expand its last word.
+     This makes sure that pop_string doesn't mark the alias as not in use
+     before the string resulting from the alias expansion is tokenized and
+     checked for alias expansion, preventing recursion.  At this point, the
+     last character in shell_input_line is the last character of the alias
+     expansion.  We test that last character to determine whether or not to
+     return the space that will delimit the token and postpone the pop_string.
+     This set of conditions duplicates what used to be in mk_alexpansion ()
+     below, with the addition that we don't add a space if we're currently
+     reading a quoted string or in a shell comment. */
+#ifndef OLD_ALIAS_HACK
+  if (uc == 0 && pushed_string_list && pushed_string_list->flags != PSH_SOURCE &&
+      pushed_string_list->flags != PSH_DPAREN &&
+      (parser_state & PST_COMMENT) == 0 &&
+      (parser_state & PST_ENDALIAS) == 0 &&	/* only once */
+      shell_input_line_index > 0 &&
+      shellblank (shell_input_line[shell_input_line_index-1]) == 0 &&
+      shell_input_line[shell_input_line_index-1] != '\n' &&
+      unquoted_backslash == 0 &&
+      shellmeta (shell_input_line[shell_input_line_index-1]) == 0 &&
+      (current_delimiter (dstack) != '\'' && current_delimiter (dstack) != '"'))
+    {
+      parser_state |= PST_ENDALIAS;
+      return ' ';	/* END_ALIAS */
+    }
+#endif
+
+pop_alias:
+  /* This case works for PSH_DPAREN as well */
+  if (uc == 0 && pushed_string_list && pushed_string_list->flags != PSH_SOURCE)
+    {
+      parser_state &= ~PST_ENDALIAS;
+      pop_string ();
+      uc = shell_input_line[shell_input_line_index];
+      if (uc)
+	shell_input_line_index++;
+    }
+#endif /* ALIAS || DPAREN_ARITHMETIC */
+
+  if MBTEST(uc == '\\' && remove_quoted_newline && shell_input_line[shell_input_line_index] == '\n')
+    {
+	if (SHOULD_PROMPT ())
+	  prompt_again ();
+	line_number++;
+
+	/* What do we do here if we're expanding an alias whose definition
+	   includes an escaped newline?  If that's the last character in the
+	   alias expansion, we just pop the pushed string list (recall that
+	   we inhibit the appending of a space if newline is the last
+	   character).  If it's not the last character, we need to consume the
+	   quoted newline and move to the next character in the expansion. */
+#if defined (ALIAS)
+	if (expanding_alias () && shell_input_line[shell_input_line_index+1] == '\0')
+	  {
+	    uc = 0;
+	    goto pop_alias;
+	  }
+	else if (expanding_alias () && shell_input_line[shell_input_line_index+1] != '\0')
+	  {
+	    shell_input_line_index++;	/* skip newline */
+	    goto next_alias_char;	/* and get next character */
+	  }
+	else
+#endif 
+	  goto restart_read;
+    }
+
+  if (uc == 0 && shell_input_line_terminator == EOF)
+    return ((shell_input_line_index != 0) ? '\n' : EOF);
+
+#if defined (ALIAS) || defined (DPAREN_ARITHMETIC)
+  /* We already know that we are not parsing an alias expansion because of the
+     check for expanding_alias() above.  This knows how parse_and_execute
+     handles switching to st_string input while an alias is being expanded,
+     hence the check for pushed_string_list without pushed_string_list->expander
+     and the check for PSH_SOURCE as pushed_string_list->flags.
+     parse_and_execute and parse_string both change the input type to st_string
+     and place the string to be parsed and executed into location.string, so
+     we should not stop reading that until the pointer is '\0'.
+     The check for shell_input_line_terminator may be superfluous.
+
+     This solves the problem of `.' inside a multi-line alias with embedded
+     newlines executing things out of order. */
+  if (uc == 0 && bash_input.type == st_string && *bash_input.location.string &&
+      pushed_string_list && pushed_string_list->flags == PSH_SOURCE &&
+      shell_input_line_terminator == 0)
+    {
+      shell_input_line_index = 0;
+      goto restart_read;
+    }
+#endif
+
+  return (uc);
+}
+
+/* Put C back into the input for the shell.  This might need changes for
+   HANDLE_MULTIBYTE around EOLs.  Since we (currently) never push back a
+   character different than we read, shell_input_line_property doesn't need
+   to change when manipulating shell_input_line.  The define for
+   last_shell_getc_is_singlebyte should take care of it, though. */
+static void
+shell_ungetc (c)
+     int c;
+{
+  if (shell_input_line && shell_input_line_index)
+    shell_input_line[--shell_input_line_index] = c;
+  else
+    eol_ungetc_lookahead = c;
+}
+
+char *
+parser_remaining_input ()
+{
+  if (shell_input_line == 0)
+    return 0;
+  if ((int)shell_input_line_index < 0 || shell_input_line_index >= shell_input_line_len)
+    return "";	/* XXX */
+  return (shell_input_line + shell_input_line_index);
+}
+
+#ifdef INCLUDE_UNUSED
+/* Back the input pointer up by one, effectively `ungetting' a character. */
+static void
+shell_ungetchar ()
+{
+  if (shell_input_line && shell_input_line_index)
+    shell_input_line_index--;
+}
+#endif
+
+/* Discard input until CHARACTER is seen, then push that character back
+   onto the input stream. */
+static void
+discard_until (character)
+     int character;
+{
+  int c;
+
+  while ((c = shell_getc (0)) != EOF && c != character)
+    ;
+
+  if (c != EOF)
+    shell_ungetc (c);
+}
+
+void
+execute_variable_command (command, vname)
+     char *command, *vname;
+{
+  char *last_lastarg;
+  sh_parser_state_t ps;
+
+  save_parser_state (&ps);
+  last_lastarg = get_string_value ("_");
+  if (last_lastarg)
+    last_lastarg = savestring (last_lastarg);
+
+  parse_and_execute (savestring (command), vname, SEVAL_NONINT|SEVAL_NOHIST);
+
+  restore_parser_state (&ps);
+  bind_variable ("_", last_lastarg, 0);
+  FREE (last_lastarg);
+
+  if (token_to_read == '\n')	/* reset_parser was called */
+    token_to_read = 0;
+}
+
+void
+push_token (x)
+     int x;
+{
+  two_tokens_ago = token_before_that;
+  token_before_that = last_read_token;
+  last_read_token = current_token;
+
+  current_token = x;
+}
+
+/* Place to remember the token.  We try to keep the buffer
+   at a reasonable size, but it can grow. */
+static char *token = (char *)NULL;
+
+/* Current size of the token buffer. */
+static int token_buffer_size;
+
+/* Command to read_token () explaining what we want it to do. */
+#define READ 0
+#define RESET 1
+#define prompt_is_ps1 \
+      (!prompt_string_pointer || prompt_string_pointer == &ps1_prompt)
+
+/* Function for yyparse to call.  yylex keeps track of
+   the last two tokens read, and calls read_token.  */
+static int
+yylex ()
+{
+  if (interactive && (current_token == 0 || current_token == '\n'))
+    {
+      /* Before we print a prompt, we might have to check mailboxes.
+	 We do this only if it is time to do so. Notice that only here
+	 is the mail alarm reset; nothing takes place in check_mail ()
+	 except the checking of mail.  Please don't change this. */
+      if (prompt_is_ps1 && parse_and_execute_level == 0 && time_to_check_mail ())
+	{
+	  check_mail ();
+	  reset_mail_timer ();
+	}
+
+      /* Avoid printing a prompt if we're not going to read anything, e.g.
+	 after resetting the parser with read_token (RESET). */
+      if (token_to_read == 0 && SHOULD_PROMPT ())
+	prompt_again ();
+    }
+
+  two_tokens_ago = token_before_that;
+  token_before_that = last_read_token;
+  last_read_token = current_token;
+  current_token = read_token (READ);
+
+  if ((parser_state & PST_EOFTOKEN) && current_token == shell_eof_token)
+    {
+      current_token = yacc_EOF;
+      if (bash_input.type == st_string)
+	rewind_input_string ();
+    }
+  parser_state &= ~PST_EOFTOKEN;	/* ??? */
+
+  return (current_token);
+}
+
+/* When non-zero, we have read the required tokens
+   which allow ESAC to be the next one read. */
+static int esacs_needed_count;
+
+/* When non-zero, we can read IN as an acceptable token, regardless of how
+   many newlines we read. */
+static int expecting_in_token;
+
+static void
+push_heredoc (r)
+     REDIRECT *r;
+{
+  if (need_here_doc >= HEREDOC_MAX)
+    {
+      last_command_exit_value = EX_BADUSAGE;
+      need_here_doc = 0;
+      report_syntax_error (_("maximum here-document count exceeded"));
+      reset_parser ();
+      exit_shell (last_command_exit_value);
+    }
+  redir_stack[need_here_doc++] = r;
+}
+
+void
+gather_here_documents ()
+{
+  int r;
+
+  r = 0;
+  here_doc_first_line = 1;
+  while (need_here_doc > 0)
+    {
+      parser_state |= PST_HEREDOC;
+      make_here_document (redir_stack[r++], line_number);
+      parser_state &= ~PST_HEREDOC;
+      need_here_doc--;
+      redir_stack[r - 1] = 0;		/* XXX */
+    }
+  here_doc_first_line = 0;		/* just in case */
+}
+
+/* When non-zero, an open-brace used to create a group is awaiting a close
+   brace partner. */
+static int open_brace_count;
+
+/* In the following three macros, `token' is always last_read_token */
+
+/* Are we in the middle of parsing a redirection where we are about to read
+   a word?  This is used to make sure alias expansion doesn't happen in the
+   middle of a redirection, even though we're parsing a simple command. */
+#define parsing_redirection(token) \
+  (token == '<' || token == '>' || \
+   token == GREATER_GREATER || token == GREATER_BAR || \
+   token == LESS_GREATER || token == LESS_LESS_MINUS || \
+   token == LESS_LESS || token == LESS_LESS_LESS || \
+   token == LESS_AND || token == GREATER_AND || token == AND_GREATER)
+
+/* Is `token' one that will allow a WORD to be read in a command position?
+   We can read a simple command name on which we should attempt alias expansion
+   or we can read an assignment statement. */
+#define command_token_position(token) \
+  (((token) == ASSIGNMENT_WORD) || \
+   ((parser_state&PST_REDIRLIST) && parsing_redirection(token) == 0) || \
+   ((token) != SEMI_SEMI && (token) != SEMI_AND && (token) != SEMI_SEMI_AND && reserved_word_acceptable(token)))
+
+/* Are we in a position where we can read an assignment statement? */
+#define assignment_acceptable(token) \
+  (command_token_position(token) && ((parser_state & PST_CASEPAT) == 0))
+
+/* Check to see if TOKEN is a reserved word and return the token
+   value if it is. */
+#define CHECK_FOR_RESERVED_WORD(tok) \
+  do { \
+    if (!dollar_present && !quoted && \
+	reserved_word_acceptable (last_read_token)) \
+      { \
+	int i; \
+	for (i = 0; word_token_alist[i].word != (char *)NULL; i++) \
+	  if (STREQ (tok, word_token_alist[i].word)) \
+	    { \
+	      if ((parser_state & PST_CASEPAT) && (word_token_alist[i].token != ESAC)) \
+		break; \
+	      if (word_token_alist[i].token == TIME && time_command_acceptable () == 0) \
+		break; \
+	      if ((parser_state & PST_CASEPAT) && last_read_token == '|' && word_token_alist[i].token == ESAC) \
+		break; /* Posix grammar rule 4 */ \
+	      if (word_token_alist[i].token == ESAC) \
+		parser_state &= ~(PST_CASEPAT|PST_CASESTMT); \
+	      else if (word_token_alist[i].token == CASE) \
+		parser_state |= PST_CASESTMT; \
+	      else if (word_token_alist[i].token == COND_END) \
+		parser_state &= ~(PST_CONDCMD|PST_CONDEXPR); \
+	      else if (word_token_alist[i].token == COND_START) \
+		parser_state |= PST_CONDCMD; \
+	      else if (word_token_alist[i].token == '{') \
+		open_brace_count++; \
+	      else if (word_token_alist[i].token == '}' && open_brace_count) \
+		open_brace_count--; \
+	      return (word_token_alist[i].token); \
+	    } \
+      } \
+  } while (0)
+
+#if defined (ALIAS)
+
+    /* OK, we have a token.  Let's try to alias expand it, if (and only if)
+       it's eligible.
+
+       It is eligible for expansion if EXPAND_ALIASES is set, and
+       the token is unquoted and the last token read was a command
+       separator (or expand_next_token is set), and we are currently
+       processing an alias (pushed_string_list is non-empty) and this
+       token is not the same as the current or any previously
+       processed alias.
+
+       Special cases that disqualify:
+	 In a pattern list in a case statement (parser_state & PST_CASEPAT). */
+
+static char *
+mk_alexpansion (s)
+     char *s;
+{
+  int l;
+  char *r;
+
+  l = strlen (s);
+  r = xmalloc (l + 2);
+  strcpy (r, s);
+#ifdef OLD_ALIAS_HACK
+  /* If the last character in the alias is a newline, don't add a trailing
+     space to the expansion.  Works with shell_getc above. */
+  /* Need to do something about the case where the alias expansion contains
+     an unmatched quoted string, since appending this space affects the
+     subsequent output. */
+  if (l > 0 && r[l - 1] != ' ' && r[l - 1] != '\n' && shellmeta(r[l - 1]) == 0)
+    r[l++] = ' ';
+#endif
+  r[l] = '\0';
+  return r;
+}
+
+static int
+alias_expand_token (tokstr)
+     char *tokstr;
+{
+  char *expanded;
+  alias_t *ap;
+
+  if (((parser_state & PST_ALEXPNEXT) || command_token_position (last_read_token)) &&
+	(parser_state & PST_CASEPAT) == 0)
+    {
+      ap = find_alias (tokstr);
+
+      /* Currently expanding this token. */
+      if (ap && (ap->flags & AL_BEINGEXPANDED))
+	return (NO_EXPANSION);
+
+#ifdef OLD_ALIAS_HACK
+      /* mk_alexpansion puts an extra space on the end of the alias expansion,
+	 so the lookahead by the parser works right (the alias needs to remain
+	 `in use' while parsing its last word to avoid alias recursion for
+	 something like "alias echo=echo").  If this gets changed, make sure
+	 the code in shell_getc that deals with reaching the end of an
+	 expanded alias is changed with it. */
+#endif
+      expanded = ap ? mk_alexpansion (ap->value) : (char *)NULL;
+
+      if (expanded)
+	{
+	  push_string (expanded, ap->flags & AL_EXPANDNEXT, ap);
+	  return (RE_READ_TOKEN);
+	}
+      else
+	/* This is an eligible token that does not have an expansion. */
+	return (NO_EXPANSION);
+    }
+  return (NO_EXPANSION);
+}
+#endif /* ALIAS */
+
+static int
+time_command_acceptable ()
+{
+#if defined (COMMAND_TIMING)
+  int i;
+
+  if (posixly_correct && shell_compatibility_level > 41)
+    {
+      /* Quick check of the rest of the line to find the next token.  If it
+	 begins with a `-', Posix says to not return `time' as the token.
+	 This was interp 267. */
+      i = shell_input_line_index;
+      while (i < shell_input_line_len && (shell_input_line[i] == ' ' || shell_input_line[i] == '\t'))
+        i++;
+      if (shell_input_line[i] == '-')
+	return 0;
+    }
+
+  switch (last_read_token)
+    {
+    case 0:
+    case ';':
+    case '\n':
+      if (token_before_that == '|')
+	return (0);
+      /* FALLTHROUGH */
+    case AND_AND:
+    case OR_OR:
+    case '&':
+    case WHILE:
+    case DO:
+    case UNTIL:
+    case IF:
+    case THEN:
+    case ELIF:
+    case ELSE:
+    case '{':		/* } */
+    case '(':		/* )( */
+    case ')':		/* only valid in case statement */
+    case BANG:		/* ! time pipeline */
+    case TIME:		/* time time pipeline */
+    case TIMEOPT:	/* time -p time pipeline */
+    case TIMEIGN:	/* time -p -- ... */
+      return 1;
+    default:
+      return 0;
+    }
+#else
+  return 0;
+#endif /* COMMAND_TIMING */
+}
+
+/* Handle special cases of token recognition:
+	IN is recognized if the last token was WORD and the token
+	before that was FOR or CASE or SELECT.
+
+	DO is recognized if the last token was WORD and the token
+	before that was FOR or SELECT.
+
+	ESAC is recognized if the last token caused `esacs_needed_count'
+	to be set
+
+	`{' is recognized if the last token as WORD and the token
+	before that was FUNCTION, or if we just parsed an arithmetic
+	`for' command.
+
+	`}' is recognized if there is an unclosed `{' present.
+
+	`-p' is returned as TIMEOPT if the last read token was TIME.
+	`--' is returned as TIMEIGN if the last read token was TIME or TIMEOPT.
+
+	']]' is returned as COND_END if the parser is currently parsing
+	a conditional expression ((parser_state & PST_CONDEXPR) != 0)
+
+	`time' is returned as TIME if and only if it is immediately
+	preceded by one of `;', `\n', `||', `&&', or `&'.
+*/
+
+static int
+special_case_tokens (tokstr)
+     char *tokstr;
+{
+  /* Posix grammar rule 6 */
+  if ((last_read_token == WORD) &&
+#if defined (SELECT_COMMAND)
+      ((token_before_that == FOR) || (token_before_that == CASE) || (token_before_that == SELECT)) &&
+#else
+      ((token_before_that == FOR) || (token_before_that == CASE)) &&
+#endif
+      (tokstr[0] == 'i' && tokstr[1] == 'n' && tokstr[2] == 0))
+    {
+      if (token_before_that == CASE)
+	{
+	  parser_state |= PST_CASEPAT;
+	  esacs_needed_count++;
+	}
+      if (expecting_in_token)
+	expecting_in_token--;
+      return (IN);
+    }
+
+  /* XXX - leaving above code intact for now, but it should eventually be
+     removed in favor of this clause. */
+  /* Posix grammar rule 6 */
+  if (expecting_in_token && (last_read_token == WORD || last_read_token == '\n') &&
+      (tokstr[0] == 'i' && tokstr[1] == 'n' && tokstr[2] == 0))
+    {
+      if (parser_state & PST_CASESTMT)
+	{
+	  parser_state |= PST_CASEPAT;
+	  esacs_needed_count++;
+	}
+      expecting_in_token--;
+      return (IN);
+    }
+  /* Posix grammar rule 6, third word in FOR: for i; do command-list; done */
+  else if (expecting_in_token && (last_read_token == '\n' || last_read_token == ';') &&
+    (tokstr[0] == 'd' && tokstr[1] == 'o' && tokstr[2] == '\0'))
+    {
+      expecting_in_token--;
+      return (DO);
+    }
+
+  /* for i do; command-list; done */
+  if (last_read_token == WORD &&
+#if defined (SELECT_COMMAND)
+      (token_before_that == FOR || token_before_that == SELECT) &&
+#else
+      (token_before_that == FOR) &&
+#endif
+      (tokstr[0] == 'd' && tokstr[1] == 'o' && tokstr[2] == '\0'))
+    {
+      if (expecting_in_token)
+	expecting_in_token--;
+      return (DO);
+    }
+
+  /* Ditto for ESAC in the CASE case.
+     Specifically, this handles "case word in esac", which is a legal
+     construct, certainly because someone will pass an empty arg to the
+     case construct, and we don't want it to barf.  Of course, we should
+     insist that the case construct has at least one pattern in it, but
+     the designers disagree. */
+  if (esacs_needed_count)
+    {
+      if (last_read_token == IN && STREQ (tokstr, "esac"))
+	{
+	  esacs_needed_count--;
+	  parser_state &= ~PST_CASEPAT;
+	  return (ESAC);
+	}
+    }
+
+  /* The start of a shell function definition. */
+  if (parser_state & PST_ALLOWOPNBRC)
+    {
+      parser_state &= ~PST_ALLOWOPNBRC;
+      if (tokstr[0] == '{' && tokstr[1] == '\0')		/* } */
+	{
+	  open_brace_count++;
+	  function_bstart = line_number;
+	  return ('{');					/* } */
+	}
+    }
+
+  /* We allow a `do' after a for ((...)) without an intervening
+     list_terminator */
+  if (last_read_token == ARITH_FOR_EXPRS && tokstr[0] == 'd' && tokstr[1] == 'o' && !tokstr[2])
+    return (DO);
+  if (last_read_token == ARITH_FOR_EXPRS && tokstr[0] == '{' && tokstr[1] == '\0')	/* } */
+    {
+      open_brace_count++;
+      return ('{');			/* } */
+    }
+
+  if (open_brace_count && reserved_word_acceptable (last_read_token) && tokstr[0] == '}' && !tokstr[1])
+    {
+      open_brace_count--;		/* { */
+      return ('}');
+    }
+
+#if defined (COMMAND_TIMING)
+  /* Handle -p after `time'. */
+  if (last_read_token == TIME && tokstr[0] == '-' && tokstr[1] == 'p' && !tokstr[2])
+    return (TIMEOPT);
+  /* Handle -- after `time'. */
+  if (last_read_token == TIME && tokstr[0] == '-' && tokstr[1] == '-' && !tokstr[2])
+    return (TIMEIGN);
+  /* Handle -- after `time -p'. */
+  if (last_read_token == TIMEOPT && tokstr[0] == '-' && tokstr[1] == '-' && !tokstr[2])
+    return (TIMEIGN);
+#endif
+
+#if defined (COND_COMMAND) /* [[ */
+  if ((parser_state & PST_CONDEXPR) && tokstr[0] == ']' && tokstr[1] == ']' && tokstr[2] == '\0')
+    return (COND_END);
+#endif
+
+  return (-1);
+}
+
+/* Called from shell.c when Control-C is typed at top level.  Or
+   by the error rule at top level. */
+void
+reset_parser ()
+{
+  dstack.delimiter_depth = 0;	/* No delimiters found so far. */
+  open_brace_count = 0;
+
+#if defined (EXTENDED_GLOB)
+  /* Reset to global value of extended glob */
+  if (parser_state & PST_EXTPAT)
+    extended_glob = global_extglob;
+#endif
+
+  parser_state = 0;
+  here_doc_first_line = 0;
+
+#if defined (ALIAS) || defined (DPAREN_ARITHMETIC)
+  if (pushed_string_list)
+    free_string_list ();
+#endif /* ALIAS || DPAREN_ARITHMETIC */
+
+  /* This is where we resynchronize to the next newline on error/reset */
+  if (shell_input_line)
+    {
+      free (shell_input_line);
+      shell_input_line = (char *)NULL;
+      shell_input_line_size = shell_input_line_index = 0;
+    }
+
+  FREE (word_desc_to_read);
+  word_desc_to_read = (WORD_DESC *)NULL;
+
+  eol_ungetc_lookahead = 0;
+
+  current_token = '\n';		/* XXX */
+  last_read_token = '\n';
+  token_to_read = '\n';
+}
+
+void
+reset_readahead_token ()
+{
+  if (token_to_read == '\n')
+    token_to_read = 0;
+}
+
+/* Read the next token.  Command can be READ (normal operation) or
+   RESET (to normalize state). */
+static int
+read_token (command)
+     int command;
+{
+  int character;		/* Current character. */
+  int peek_char;		/* Temporary look-ahead character. */
+  int result;			/* The thing to return. */
+
+  if (command == RESET)
+    {
+      reset_parser ();
+      return ('\n');
+    }
+
+  if (token_to_read)
+    {
+      result = token_to_read;
+      if (token_to_read == WORD || token_to_read == ASSIGNMENT_WORD)
+	{
+	  yylval.word = word_desc_to_read;
+	  word_desc_to_read = (WORD_DESC *)NULL;
+	}
+      token_to_read = 0;
+      return (result);
+    }
+
+#if defined (COND_COMMAND)
+  if ((parser_state & (PST_CONDCMD|PST_CONDEXPR)) == PST_CONDCMD)
+    {
+      cond_lineno = line_number;
+      parser_state |= PST_CONDEXPR;
+      yylval.command = parse_cond_command ();
+      if (cond_token != COND_END)
+	{
+	  cond_error ();
+	  return (-1);
+	}
+      token_to_read = COND_END;
+      parser_state &= ~(PST_CONDEXPR|PST_CONDCMD);
+      return (COND_CMD);
+    }
+#endif
+
+#if defined (ALIAS)
+  /* This is a place to jump back to once we have successfully expanded a
+     token with an alias and pushed the string with push_string () */
+ re_read_token:
+#endif /* ALIAS */
+
+  /* Read a single word from input.  Start by skipping blanks. */
+  while ((character = shell_getc (1)) != EOF && shellblank (character))
+    ;
+
+  if (character == EOF)
+    {
+      EOF_Reached = 1;
+      return (yacc_EOF);
+    }
+
+  /* If we hit the end of the string and we're not expanding an alias (e.g.,
+     we are eval'ing a string that is an incomplete command), return EOF */
+  if (character == '\0' && bash_input.type == st_string && expanding_alias() == 0)
+    {
+#if defined (DEBUG)
+itrace("shell_getc: bash_input.location.string = `%s'", bash_input.location.string);
+#endif
+      EOF_Reached = 1;
+      return (yacc_EOF);
+    }
+
+  if MBTEST(character == '#' && (!interactive || interactive_comments))
+    {
+      /* A comment.  Discard until EOL or EOF, and then return a newline. */
+      parser_state |= PST_COMMENT;
+      discard_until ('\n');
+      shell_getc (0);
+      parser_state &= ~PST_COMMENT;
+      character = '\n';	/* this will take the next if statement and return. */
+    }
+
+  if (character == '\n')
+    {
+      /* If we're about to return an unquoted newline, we can go and collect
+	 the text of any pending here document. */
+      if (need_here_doc)
+	gather_here_documents ();
+
+#if defined (ALIAS)
+      parser_state &= ~PST_ALEXPNEXT;
+#endif /* ALIAS */
+
+      parser_state &= ~PST_ASSIGNOK;
+
+      return (character);
+    }
+
+  if (parser_state & PST_REGEXP)
+    goto tokword;
+
+  /* Shell meta-characters. */
+  if MBTEST(shellmeta (character) && ((parser_state & PST_DBLPAREN) == 0))
+    {
+#if defined (ALIAS)
+      /* Turn off alias tokenization iff this character sequence would
+	 not leave us ready to read a command. */
+      if (character == '<' || character == '>')
+	parser_state &= ~PST_ALEXPNEXT;
+#endif /* ALIAS */
+
+      parser_state &= ~PST_ASSIGNOK;
+
+      /* If we are parsing a command substitution and we have read a character
+	 that marks the end of it, don't bother to skip over quoted newlines
+	 when we read the next token. We're just interested in a character
+	 that will turn this into a two-character token, so we let the higher
+	 layers deal with quoted newlines following the command substitution. */
+      if ((parser_state & PST_CMDSUBST) && character == shell_eof_token)
+	peek_char = shell_getc (0);
+      else
+	peek_char = shell_getc (1);
+
+      if (character == peek_char)
+	{
+	  switch (character)
+	    {
+	    case '<':
+	      /* If '<' then we could be at "<<" or at "<<-".  We have to
+		 look ahead one more character. */
+	      peek_char = shell_getc (1);
+	      if MBTEST(peek_char == '-')
+		return (LESS_LESS_MINUS);
+	      else if MBTEST(peek_char == '<')
+		return (LESS_LESS_LESS);
+	      else
+		{
+		  shell_ungetc (peek_char);
+		  return (LESS_LESS);
+		}
+
+	    case '>':
+	      return (GREATER_GREATER);
+
+	    case ';':
+	      parser_state |= PST_CASEPAT;
+#if defined (ALIAS)
+	      parser_state &= ~PST_ALEXPNEXT;
+#endif /* ALIAS */
+
+	      peek_char = shell_getc (1);
+	      if MBTEST(peek_char == '&')
+		return (SEMI_SEMI_AND);
+	      else
+		{
+		  shell_ungetc (peek_char);
+		  return (SEMI_SEMI);
+		}
+
+	    case '&':
+	      return (AND_AND);
+
+	    case '|':
+	      return (OR_OR);
+
+#if defined (DPAREN_ARITHMETIC) || defined (ARITH_FOR_COMMAND)
+	    case '(':		/* ) */
+	      result = parse_dparen (character);
+	      if (result == -2)
+	        break;
+	      else
+	        return result;
+#endif
+	    }
+	}
+      else if MBTEST(character == '<' && peek_char == '&')
+	return (LESS_AND);
+      else if MBTEST(character == '>' && peek_char == '&')
+	return (GREATER_AND);
+      else if MBTEST(character == '<' && peek_char == '>')
+	return (LESS_GREATER);
+      else if MBTEST(character == '>' && peek_char == '|')
+	return (GREATER_BAR);
+      else if MBTEST(character == '&' && peek_char == '>')
+	{
+	  peek_char = shell_getc (1);
+	  if MBTEST(peek_char == '>')
+	    return (AND_GREATER_GREATER);
+	  else
+	    {
+	      shell_ungetc (peek_char);
+	      return (AND_GREATER);
+	    }
+	}
+      else if MBTEST(character == '|' && peek_char == '&')
+	return (BAR_AND);
+      else if MBTEST(character == ';' && peek_char == '&')
+	{
+	  parser_state |= PST_CASEPAT;
+#if defined (ALIAS)
+	  parser_state &= ~PST_ALEXPNEXT;
+#endif /* ALIAS */
+	  return (SEMI_AND);
+	}
+
+      shell_ungetc (peek_char);
+
+      /* If we look like we are reading the start of a function
+	 definition, then let the reader know about it so that
+	 we will do the right thing with `{'. */
+      if MBTEST(character == ')' && last_read_token == '(' && token_before_that == WORD)
+	{
+	  parser_state |= PST_ALLOWOPNBRC;
+#if defined (ALIAS)
+	  parser_state &= ~PST_ALEXPNEXT;
+#endif /* ALIAS */
+	  function_dstart = line_number;
+	}
+
+      /* case pattern lists may be preceded by an optional left paren.  If
+	 we're not trying to parse a case pattern list, the left paren
+	 indicates a subshell. */
+      if MBTEST(character == '(' && (parser_state & PST_CASEPAT) == 0) /* ) */
+	parser_state |= PST_SUBSHELL;
+      /*(*/
+      else if MBTEST((parser_state & PST_CASEPAT) && character == ')')
+	parser_state &= ~PST_CASEPAT;
+      /*(*/
+      else if MBTEST((parser_state & PST_SUBSHELL) && character == ')')
+	parser_state &= ~PST_SUBSHELL;
+
+#if defined (PROCESS_SUBSTITUTION)
+      /* Check for the constructs which introduce process substitution.
+	 Shells running in `posix mode' don't do process substitution. */
+      if MBTEST((character != '>' && character != '<') || peek_char != '(') /*)*/
+#endif /* PROCESS_SUBSTITUTION */
+	return (character);
+    }
+
+  /* Hack <&- (close stdin) case.  Also <&N- (dup and close). */
+  if MBTEST(character == '-' && (last_read_token == LESS_AND || last_read_token == GREATER_AND))
+    return (character);
+
+tokword:
+  /* Okay, if we got this far, we have to read a word.  Read one,
+     and then check it against the known ones. */
+  result = read_token_word (character);
+#if defined (ALIAS)
+  if (result == RE_READ_TOKEN)
+    goto re_read_token;
+#endif
+  return result;
+}
+
+/*
+ * Match a $(...) or other grouping construct.  This has to handle embedded
+ * quoted strings ('', ``, "") and nested constructs.  It also must handle
+ * reprompting the user, if necessary, after reading a newline, and returning
+ * correct error values if it reads EOF.
+ */
+#define P_FIRSTCLOSE	0x0001
+#define P_ALLOWESC	0x0002
+#define P_DQUOTE	0x0004
+#define P_COMMAND	0x0008	/* parsing a command, so look for comments */
+#define P_BACKQUOTE	0x0010	/* parsing a backquoted command substitution */
+#define P_ARRAYSUB	0x0020	/* parsing a [...] array subscript for assignment */
+#define P_DOLBRACE	0x0040	/* parsing a ${...} construct */
+
+/* Lexical state while parsing a grouping construct or $(...). */
+#define LEX_WASDOL	0x0001
+#define LEX_CKCOMMENT	0x0002
+#define LEX_INCOMMENT	0x0004
+#define LEX_PASSNEXT	0x0008
+#define LEX_RESWDOK	0x0010
+#define LEX_CKCASE	0x0020
+#define LEX_INCASE	0x0040
+#define LEX_INHEREDOC	0x0080
+#define LEX_HEREDELIM	0x0100		/* reading here-doc delimiter */
+#define LEX_STRIPDOC	0x0200		/* <<- strip tabs from here doc delim */
+#define LEX_QUOTEDDOC	0x0400		/* here doc with quoted delim */
+#define LEX_INWORD	0x0800
+#define LEX_GTLT	0x1000
+
+#define COMSUB_META(ch)		((ch) == ';' || (ch) == '&' || (ch) == '|')
+
+#define CHECK_NESTRET_ERROR() \
+  do { \
+    if (nestret == &matched_pair_error) \
+      { \
+	free (ret); \
+	return &matched_pair_error; \
+      } \
+  } while (0)
+
+#define APPEND_NESTRET() \
+  do { \
+    if (nestlen) \
+      { \
+	RESIZE_MALLOCED_BUFFER (ret, retind, nestlen, retsize, 64); \
+	strcpy (ret + retind, nestret); \
+	retind += nestlen; \
+      } \
+  } while (0)
+
+static char matched_pair_error;
+
+static char *
+parse_matched_pair (qc, open, close, lenp, flags)
+     int qc;	/* `"' if this construct is within double quotes */
+     int open, close;
+     int *lenp, flags;
+{
+  int count, ch, prevch, tflags;
+  int nestlen, ttranslen, start_lineno;
+  char *ret, *nestret, *ttrans;
+  int retind, retsize, rflags;
+  int dolbrace_state;
+
+  dolbrace_state = (flags & P_DOLBRACE) ? DOLBRACE_PARAM : 0;
+
+/*itrace("parse_matched_pair[%d]: open = %c close = %c flags = %d", line_number, open, close, flags);*/
+  count = 1;
+  tflags = 0;
+
+  if ((flags & P_COMMAND) && qc != '`' && qc != '\'' && qc != '"' && (flags & P_DQUOTE) == 0)
+    tflags |= LEX_CKCOMMENT;
+
+  /* RFLAGS is the set of flags we want to pass to recursive calls. */
+  rflags = (qc == '"') ? P_DQUOTE : (flags & P_DQUOTE);
+
+  ret = (char *)xmalloc (retsize = 64);
+  retind = 0;
+
+  start_lineno = line_number;
+  ch = EOF;		/* just in case */
+  while (count)
+    {
+      prevch = ch;
+      ch = shell_getc (qc != '\'' && (tflags & (LEX_PASSNEXT)) == 0);
+
+      if (ch == EOF)
+	{
+	  free (ret);
+	  parser_error (start_lineno, _("unexpected EOF while looking for matching `%c'"), close);
+	  EOF_Reached = 1;	/* XXX */
+	  return (&matched_pair_error);
+	}
+
+      /* Possible reprompting. */
+      if (ch == '\n' && SHOULD_PROMPT ())
+	prompt_again ();
+
+      /* Don't bother counting parens or doing anything else if in a comment
+	 or part of a case statement */
+      if (tflags & LEX_INCOMMENT)
+	{
+	  /* Add this character. */
+	  RESIZE_MALLOCED_BUFFER (ret, retind, 1, retsize, 64);
+	  ret[retind++] = ch;
+
+	  if (ch == '\n')
+	    tflags &= ~LEX_INCOMMENT;
+
+	  continue;
+	}
+
+      /* Not exactly right yet, should handle shell metacharacters, too.  If
+	 any changes are made to this test, make analogous changes to subst.c:
+	 extract_delimited_string(). */
+      else if MBTEST((tflags & LEX_CKCOMMENT) && (tflags & LEX_INCOMMENT) == 0 && ch == '#' && (retind == 0 || ret[retind-1] == '\n' || shellblank (ret[retind - 1])))
+	tflags |= LEX_INCOMMENT;
+
+      if (tflags & LEX_PASSNEXT)		/* last char was backslash */
+	{
+	  tflags &= ~LEX_PASSNEXT;
+	  if (qc != '\'' && ch == '\n')	/* double-quoted \<newline> disappears. */
+	    {
+	      if (retind > 0)
+		retind--;	/* swallow previously-added backslash */
+	      continue;
+	    }
+
+	  RESIZE_MALLOCED_BUFFER (ret, retind, 2, retsize, 64);
+	  if MBTEST(ch == CTLESC)
+	    ret[retind++] = CTLESC;
+	  ret[retind++] = ch;
+	  continue;
+	}
+      /* If we're reparsing the input (e.g., from parse_string_to_word_list),
+	 we've already prepended CTLESC to single-quoted results of $'...'.
+	 We may want to do this for other CTLESC-quoted characters in
+	 reparse, too. */
+      else if MBTEST((parser_state & PST_REPARSE) && open == '\'' && (ch == CTLESC || ch == CTLNUL))
+	{
+	  RESIZE_MALLOCED_BUFFER (ret, retind, 1, retsize, 64);
+	  ret[retind++] = ch;
+	  continue;
+	}
+      else if MBTEST(ch == CTLESC || ch == CTLNUL)	/* special shell escapes */
+	{
+	  RESIZE_MALLOCED_BUFFER (ret, retind, 2, retsize, 64);
+	  ret[retind++] = CTLESC;
+	  ret[retind++] = ch;
+	  continue;
+	}
+      else if MBTEST(ch == close)		/* ending delimiter */
+	count--;
+      /* handle nested ${...} specially. */
+      else if MBTEST(open != close && (tflags & LEX_WASDOL) && open == '{' && ch == open) /* } */
+	count++;
+      else if MBTEST(((flags & P_FIRSTCLOSE) == 0) && ch == open)	/* nested begin */
+	count++;
+
+      /* Add this character. */
+      RESIZE_MALLOCED_BUFFER (ret, retind, 1, retsize, 64);
+      ret[retind++] = ch;
+
+      /* If we just read the ending character, don't bother continuing. */
+      if (count == 0)
+	break;
+
+      if (open == '\'')			/* '' inside grouping construct */
+	{
+	  if MBTEST((flags & P_ALLOWESC) && ch == '\\')
+	    tflags |= LEX_PASSNEXT;
+	  continue;
+	}
+
+      if MBTEST(ch == '\\')			/* backslashes */
+	tflags |= LEX_PASSNEXT;
+
+      /* Based on which dolstate is currently in (param, op, or word),
+	 decide what the op is.  We're really only concerned if it's % or
+	 #, so we can turn on a flag that says whether or not we should
+	 treat single quotes as special when inside a double-quoted
+	 ${...}. This logic must agree with subst.c:extract_dollar_brace_string
+	 since they share the same defines. */
+      /* FLAG POSIX INTERP 221 */
+      if (flags & P_DOLBRACE)
+        {
+          /* ${param%[%]word} */
+	  if MBTEST(dolbrace_state == DOLBRACE_PARAM && ch == '%' && retind > 1)
+	    dolbrace_state = DOLBRACE_QUOTE;
+          /* ${param#[#]word} */
+	  else if MBTEST(dolbrace_state == DOLBRACE_PARAM && ch == '#' && retind > 1)
+	    dolbrace_state = DOLBRACE_QUOTE;
+          /* ${param/[/]pat/rep} */
+	  else if MBTEST(dolbrace_state == DOLBRACE_PARAM && ch == '/' && retind > 1)
+	    dolbrace_state = DOLBRACE_QUOTE2;	/* XXX */
+          /* ${param^[^]pat} */
+	  else if MBTEST(dolbrace_state == DOLBRACE_PARAM && ch == '^' && retind > 1)
+	    dolbrace_state = DOLBRACE_QUOTE;
+          /* ${param,[,]pat} */
+	  else if MBTEST(dolbrace_state == DOLBRACE_PARAM && ch == ',' && retind > 1)
+	    dolbrace_state = DOLBRACE_QUOTE;
+	  else if MBTEST(dolbrace_state == DOLBRACE_PARAM && strchr ("#%^,~:-=?+/", ch) != 0)
+	    dolbrace_state = DOLBRACE_OP;
+	  else if MBTEST(dolbrace_state == DOLBRACE_OP && strchr ("#%^,~:-=?+/", ch) == 0)
+	    dolbrace_state = DOLBRACE_WORD;
+        }
+
+      /* The big hammer.  Single quotes aren't special in double quotes.  The
+         problem is that Posix used to say the single quotes are semi-special:
+         within a double-quoted ${...} construct "an even number of
+         unescaped double-quotes or single-quotes, if any, shall occur." */
+      /* This was changed in Austin Group Interp 221 */
+      if MBTEST(posixly_correct && shell_compatibility_level > 41 && dolbrace_state != DOLBRACE_QUOTE && dolbrace_state != DOLBRACE_QUOTE2 && (flags & P_DQUOTE) && (flags & P_DOLBRACE) && ch == '\'')
+	continue;
+
+      /* Could also check open == '`' if we want to parse grouping constructs
+	 inside old-style command substitution. */
+      if (open != close)		/* a grouping construct */
+	{
+	  if MBTEST(shellquote (ch))
+	    {
+	      /* '', ``, or "" inside $(...) or other grouping construct. */
+	      push_delimiter (dstack, ch);
+	      if MBTEST((tflags & LEX_WASDOL) && ch == '\'')	/* $'...' inside group */
+		nestret = parse_matched_pair (ch, ch, ch, &nestlen, P_ALLOWESC|rflags);
+	      else
+		nestret = parse_matched_pair (ch, ch, ch, &nestlen, rflags);
+	      pop_delimiter (dstack);
+	      CHECK_NESTRET_ERROR ();
+
+	      if MBTEST((tflags & LEX_WASDOL) && ch == '\'' && (extended_quote || (rflags & P_DQUOTE) == 0))
+		{
+		  /* Translate $'...' here. */
+		  ttrans = ansiexpand (nestret, 0, nestlen - 1, &ttranslen);
+		  free (nestret);
+
+		  /* If we're parsing a double-quoted brace expansion and we are
+		     not in a place where single quotes are treated specially,
+		     make sure we single-quote the results of the ansi
+		     expansion because quote removal should remove them later */
+		  /* FLAG POSIX INTERP 221 */
+		  if ((shell_compatibility_level > 42) && (rflags & P_DQUOTE) && (dolbrace_state == DOLBRACE_QUOTE2) && (flags & P_DOLBRACE))
+		    {
+		      nestret = sh_single_quote (ttrans);
+		      free (ttrans);
+		      nestlen = strlen (nestret);
+		    }
+		  else if ((rflags & P_DQUOTE) == 0)
+		    {
+		      nestret = sh_single_quote (ttrans);
+		      free (ttrans);
+		      nestlen = strlen (nestret);
+		    }
+		  else
+		    {
+		      nestret = ttrans;
+		      nestlen = ttranslen;
+		    }
+		  retind -= 2;		/* back up before the $' */
+		}
+	      else if MBTEST((tflags & LEX_WASDOL) && ch == '"' && (extended_quote || (rflags & P_DQUOTE) == 0))
+		{
+		  /* Locale expand $"..." here. */
+		  ttrans = localeexpand (nestret, 0, nestlen - 1, start_lineno, &ttranslen);
+		  free (nestret);
+
+		  nestret = sh_mkdoublequoted (ttrans, ttranslen, 0);
+		  free (ttrans);
+		  nestlen = ttranslen + 2;
+		  retind -= 2;		/* back up before the $" */
+		}
+
+	      APPEND_NESTRET ();
+	      FREE (nestret);
+	    }
+	  else if ((flags & (P_ARRAYSUB|P_DOLBRACE)) && (tflags & LEX_WASDOL) && (ch == '(' || ch == '{' || ch == '['))	/* ) } ] */
+	    goto parse_dollar_word;
+#if defined (PROCESS_SUBSTITUTION)
+	  /* XXX - technically this should only be recognized at the start of
+	     a word */
+	  else if ((flags & (P_ARRAYSUB|P_DOLBRACE)) && (tflags & LEX_GTLT) && (ch == '('))	/* ) */
+	    goto parse_dollar_word;
+#endif
+	}
+      /* Parse an old-style command substitution within double quotes as a
+	 single word. */
+      /* XXX - sh and ksh93 don't do this - XXX */
+      else if MBTEST(open == '"' && ch == '`')
+	{
+	  nestret = parse_matched_pair (0, '`', '`', &nestlen, rflags);
+
+	  CHECK_NESTRET_ERROR ();
+	  APPEND_NESTRET ();
+
+	  FREE (nestret);
+	}
+      else if MBTEST(open != '`' && (tflags & LEX_WASDOL) && (ch == '(' || ch == '{' || ch == '['))	/* ) } ] */
+	/* check for $(), $[], or ${} inside quoted string. */
+	{
+parse_dollar_word:
+	  if (open == ch)	/* undo previous increment */
+	    count--;
+	  if (ch == '(')		/* ) */
+	    nestret = parse_comsub (0, '(', ')', &nestlen, (rflags|P_COMMAND) & ~P_DQUOTE);
+	  else if (ch == '{')		/* } */
+	    nestret = parse_matched_pair (0, '{', '}', &nestlen, P_FIRSTCLOSE|P_DOLBRACE|rflags);
+	  else if (ch == '[')		/* ] */
+	    nestret = parse_matched_pair (0, '[', ']', &nestlen, rflags);
+
+	  CHECK_NESTRET_ERROR ();
+	  APPEND_NESTRET ();
+
+	  FREE (nestret);
+	}
+#if defined (PROCESS_SUBSTITUTION)
+      if MBTEST((ch == '<' || ch == '>') && (tflags & LEX_GTLT) == 0)
+	tflags |= LEX_GTLT;
+      else
+	tflags &= ~LEX_GTLT;
+#endif
+      if MBTEST(ch == '$' && (tflags & LEX_WASDOL) == 0)
+	tflags |= LEX_WASDOL;
+      else
+	tflags &= ~LEX_WASDOL;
+    }
+
+  ret[retind] = '\0';
+  if (lenp)
+    *lenp = retind;
+/*itrace("parse_matched_pair[%d]: returning %s", line_number, ret);*/
+  return ret;
+}
+
+#if defined (DEBUG)
+static void
+dump_tflags (flags)
+     int flags;
+{
+  int f;
+
+  f = flags;
+  fprintf (stderr, "%d -> ", f);
+  if (f & LEX_WASDOL)
+    {
+      f &= ~LEX_WASDOL;
+      fprintf (stderr, "LEX_WASDOL%s", f ? "|" : "");
+    }
+  if (f & LEX_CKCOMMENT)
+    {
+      f &= ~LEX_CKCOMMENT;
+      fprintf (stderr, "LEX_CKCOMMENT%s", f ? "|" : "");
+    }
+  if (f & LEX_INCOMMENT)
+    {
+      f &= ~LEX_INCOMMENT;
+      fprintf (stderr, "LEX_INCOMMENT%s", f ? "|" : "");
+    }
+  if (f & LEX_PASSNEXT)
+    {
+      f &= ~LEX_PASSNEXT;
+      fprintf (stderr, "LEX_PASSNEXT%s", f ? "|" : "");
+    }
+  if (f & LEX_RESWDOK)
+    {
+      f &= ~LEX_RESWDOK;
+      fprintf (stderr, "LEX_RESWDOK%s", f ? "|" : "");
+    }
+  if (f & LEX_CKCASE)
+    {
+      f &= ~LEX_CKCASE;
+      fprintf (stderr, "LEX_CKCASE%s", f ? "|" : "");
+    }
+  if (f & LEX_INCASE)
+    {
+      f &= ~LEX_INCASE;
+      fprintf (stderr, "LEX_INCASE%s", f ? "|" : "");
+    }
+  if (f & LEX_INHEREDOC)
+    {
+      f &= ~LEX_INHEREDOC;
+      fprintf (stderr, "LEX_INHEREDOC%s", f ? "|" : "");
+    }
+  if (f & LEX_HEREDELIM)
+    {
+      f &= ~LEX_HEREDELIM;
+      fprintf (stderr, "LEX_HEREDELIM%s", f ? "|" : "");
+    }
+  if (f & LEX_STRIPDOC)
+    {
+      f &= ~LEX_STRIPDOC;
+      fprintf (stderr, "LEX_WASDOL%s", f ? "|" : "");
+    }
+  if (f & LEX_QUOTEDDOC)
+    {
+      f &= ~LEX_QUOTEDDOC;
+      fprintf (stderr, "LEX_QUOTEDDOC%s", f ? "|" : "");
+    }
+  if (f & LEX_INWORD)
+    {
+      f &= ~LEX_INWORD;
+      fprintf (stderr, "LEX_INWORD%s", f ? "|" : "");
+    }
+
+  fprintf (stderr, "\n");
+  fflush (stderr);
+}
+#endif
+
+/* Parse a $(...) command substitution.  This is messier than I'd like, and
+   reproduces a lot more of the token-reading code than I'd like. */
+static char *
+parse_comsub (qc, open, close, lenp, flags)
+     int qc;	/* `"' if this construct is within double quotes */
+     int open, close;
+     int *lenp, flags;
+{
+  int count, ch, peekc, tflags, lex_rwlen, lex_wlen, lex_firstind;
+  int nestlen, ttranslen, start_lineno, orig_histexp;
+  char *ret, *nestret, *ttrans, *heredelim;
+  int retind, retsize, rflags, hdlen;
+
+  /* Posix interp 217 says arithmetic expressions have precedence, so
+     assume $(( introduces arithmetic expansion and parse accordingly. */
+  peekc = shell_getc (0);
+  shell_ungetc (peekc);
+  if (peekc == '(')
+    return (parse_matched_pair (qc, open, close, lenp, 0));
+
+/*itrace("parse_comsub: qc = `%c' open = %c close = %c", qc, open, close);*/
+  count = 1;
+  tflags = LEX_RESWDOK;
+#if defined (BANG_HISTORY)
+  orig_histexp = history_expansion_inhibited;
+#endif
+
+  if ((flags & P_COMMAND) && qc != '\'' && qc != '"' && (flags & P_DQUOTE) == 0)
+    tflags |= LEX_CKCASE;
+  if ((tflags & LEX_CKCASE) && (interactive == 0 || interactive_comments))
+    tflags |= LEX_CKCOMMENT;
+
+  /* RFLAGS is the set of flags we want to pass to recursive calls. */
+  rflags = (flags & P_DQUOTE);
+
+  ret = (char *)xmalloc (retsize = 64);
+  retind = 0;
+
+  start_lineno = line_number;
+  lex_rwlen = lex_wlen = 0;
+
+  heredelim = 0;
+  lex_firstind = -1;
+
+  while (count)
+    {
+comsub_readchar:
+      ch = shell_getc (qc != '\'' && (tflags & (LEX_INCOMMENT|LEX_PASSNEXT|LEX_QUOTEDDOC)) == 0);
+
+      if (ch == EOF)
+	{
+eof_error:
+#if defined (BANG_HISTORY)
+	  history_expansion_inhibited = orig_histexp;
+#endif
+	  free (ret);
+	  FREE (heredelim);
+	  parser_error (start_lineno, _("unexpected EOF while looking for matching `%c'"), close);
+	  EOF_Reached = 1;	/* XXX */
+	  return (&matched_pair_error);
+	}
+
+      /* If we hit the end of a line and are reading the contents of a here
+	 document, and it's not the same line that the document starts on,
+	 check for this line being the here doc delimiter.  Otherwise, if
+	 we're in a here document, mark the next character as the beginning
+	 of a line. */
+      if (ch == '\n')
+	{
+	  if ((tflags & LEX_HEREDELIM) && heredelim)
+	    {
+	      tflags &= ~LEX_HEREDELIM;
+	      tflags |= LEX_INHEREDOC;
+#if defined (BANG_HISTORY)
+	      history_expansion_inhibited = 1;
+#endif
+	      lex_firstind = retind + 1;
+	    }
+	  else if (tflags & LEX_INHEREDOC)
+	    {
+	      int tind;
+	      tind = lex_firstind;
+	      while ((tflags & LEX_STRIPDOC) && ret[tind] == '\t')
+		tind++;
+	      if (retind-tind == hdlen && STREQN (ret + tind, heredelim, hdlen))
+		{
+		  tflags &= ~(LEX_STRIPDOC|LEX_INHEREDOC|LEX_QUOTEDDOC);
+/*itrace("parse_comsub:%d: found here doc end `%s'", line_number, ret + tind);*/
+		  free (heredelim);
+		  heredelim = 0;
+		  lex_firstind = -1;
+#if defined (BANG_HISTORY)
+		  history_expansion_inhibited = orig_histexp;
+#endif
+		}
+	      else
+		lex_firstind = retind + 1;
+	    }
+	}
+
+      /* Possible reprompting. */
+      if (ch == '\n' && SHOULD_PROMPT ())
+	prompt_again ();
+
+      /* XXX -- we currently allow here doc to be delimited by ending right
+	 paren in default mode and posix mode. To change posix mode, change
+	 the #if 1 to #if 0 below */
+      if ((tflags & LEX_INHEREDOC) && ch == close && count == 1)
+	{
+	  int tind;
+/*itrace("parse_comsub:%d: in here doc, ch == close, retind - firstind = %d hdlen = %d retind = %d", line_number, retind-lex_firstind, hdlen, retind);*/
+	  tind = lex_firstind;
+	  while ((tflags & LEX_STRIPDOC) && ret[tind] == '\t')
+	    tind++;
+#if 1
+  	  if (retind-tind == hdlen && STREQN (ret + tind, heredelim, hdlen))
+#else
+	  /* Posix-mode shells require the newline after the here-document
+	     delimiter. */
+	  if (retind-tind == hdlen && STREQN (ret + tind, heredelim, hdlen) &&
+	      posixly_correct == 0)
+#endif
+	    {
+	      tflags &= ~(LEX_STRIPDOC|LEX_INHEREDOC|LEX_QUOTEDDOC);
+/*itrace("parse_comsub:%d: found here doc end `%*s'", line_number, hdlen, ret + tind);*/
+	      free (heredelim);
+	      heredelim = 0;
+	      lex_firstind = -1;
+#if defined (BANG_HISTORY)
+	      history_expansion_inhibited = orig_histexp;
+#endif
+	    }
+	}
+
+      /* Don't bother counting parens or doing anything else if in a comment or
+	 here document (not exactly right for here-docs -- if we want to allow
+	 recursive calls to parse_comsub to have their own here documents,
+	 change the LEX_INHEREDOC to LEX_QUOTEDDOC here and uncomment the next
+	 clause below.  Note that to make this work completely, we need to make
+	 additional changes to allow xparse_dolparen to work right when the
+	 command substitution is parsed, because read_secondary_line doesn't know
+	 to recursively parse through command substitutions embedded in here-
+	 documents */
+      if (tflags & (LEX_INCOMMENT|LEX_INHEREDOC))
+	{
+	  /* Add this character. */
+	  RESIZE_MALLOCED_BUFFER (ret, retind, 1, retsize, 64);
+	  ret[retind++] = ch;
+
+	  if ((tflags & LEX_INCOMMENT) && ch == '\n')
+	    {
+/*itrace("parse_comsub:%d: lex_incomment -> 0 ch = `%c'", line_number, ch);*/
+	      tflags &= ~LEX_INCOMMENT;
+	    }
+
+	  continue;
+	}
+#if 0
+      /* If we're going to recursively parse a command substitution inside a
+	 here-document, make sure we call parse_comsub recursively below.  See
+	 above for additional caveats. */
+      if ((tflags & LEX_INHEREDOC) && ((tflags & LEX_WASDOL) == 0 || ch != '(')) /*)*/
+	{
+	  /* Add this character. */
+	  RESIZE_MALLOCED_BUFFER (ret, retind, 1, retsize, 64);
+	  ret[retind++] = ch;
+	  if MBTEST(ch == '$')
+	    tflags |= LEX_WASDOL;
+	  else
+	    tflags &= ~LEX_WASDOL;
+	}
+#endif
+
+      if (tflags & LEX_PASSNEXT)		/* last char was backslash */
+	{
+/*itrace("parse_comsub:%d: lex_passnext -> 0 ch = `%c' (%d)", line_number, ch, __LINE__);*/
+	  tflags &= ~LEX_PASSNEXT;
+	  if (qc != '\'' && ch == '\n')	/* double-quoted \<newline> disappears. */
+	    {
+	      if (retind > 0)
+		retind--;	/* swallow previously-added backslash */
+	      continue;
+	    }
+
+	  RESIZE_MALLOCED_BUFFER (ret, retind, 2, retsize, 64);
+	  if MBTEST(ch == CTLESC)
+	    ret[retind++] = CTLESC;
+	  ret[retind++] = ch;
+	  continue;
+	}
+
+      /* If this is a shell break character, we are not in a word.  If not,
+	 we either start or continue a word. */
+      if MBTEST(shellbreak (ch))
+	{
+	  tflags &= ~LEX_INWORD;
+/*itrace("parse_comsub:%d: lex_inword -> 0 ch = `%c' (%d)", line_number, ch, __LINE__);*/
+	}
+      else
+	{
+	  if (tflags & LEX_INWORD)
+	    {
+	      lex_wlen++;
+/*itrace("parse_comsub:%d: lex_inword == 1 ch = `%c' lex_wlen = %d (%d)", line_number, ch, lex_wlen, __LINE__);*/
+	    }	      
+	  else
+	    {
+/*itrace("parse_comsub:%d: lex_inword -> 1 ch = `%c' (%d)", line_number, ch, __LINE__);*/
+	      tflags |= LEX_INWORD;
+	      lex_wlen = 0;
+	      if (tflags & LEX_RESWDOK)
+		lex_rwlen = 0;
+	    }
+	}
+
+      /* Skip whitespace */
+      if MBTEST(shellblank (ch) && (tflags & LEX_HEREDELIM) == 0 && lex_rwlen == 0)
+        {
+	  /* Add this character. */
+	  RESIZE_MALLOCED_BUFFER (ret, retind, 1, retsize, 64);
+	  ret[retind++] = ch;
+	  continue;
+        }
+
+      /* Either we are looking for the start of the here-doc delimiter
+	 (lex_firstind == -1) or we are reading one (lex_firstind >= 0).
+	 If this character is a shell break character and we are reading
+	 the delimiter, save it and note that we are now reading a here
+	 document.  If we've found the start of the delimiter, note it by
+	 setting lex_firstind.  Backslashes can quote shell metacharacters
+	 in here-doc delimiters. */
+      if (tflags & LEX_HEREDELIM)
+	{
+	  if (lex_firstind == -1 && shellbreak (ch) == 0)
+	    lex_firstind = retind;
+#if 0
+	  else if (heredelim && (tflags & LEX_PASSNEXT) == 0 && ch == '\n')
+	    {
+	      tflags |= LEX_INHEREDOC;
+	      tflags &= ~LEX_HEREDELIM;
+	      lex_firstind = retind + 1;
+#if defined (BANG_HISTORY)
+	      history_expansion_inhibited = 1;
+#endif
+	    }
+#endif
+	  else if (lex_firstind >= 0 && (tflags & LEX_PASSNEXT) == 0 && shellbreak (ch))
+	    {
+	      if (heredelim == 0)
+		{
+		  nestret = substring (ret, lex_firstind, retind);
+		  heredelim = string_quote_removal (nestret, 0);
+		  hdlen = STRLEN(heredelim);
+/*itrace("parse_comsub:%d: found here doc delimiter `%s' (%d)", line_number, heredelim, hdlen);*/
+		  if (STREQ (heredelim, nestret) == 0)
+		    tflags |= LEX_QUOTEDDOC;
+		  free (nestret);
+		}
+	      if (ch == '\n')
+		{
+		  tflags |= LEX_INHEREDOC;
+		  tflags &= ~LEX_HEREDELIM;
+		  lex_firstind = retind + 1;
+#if defined (BANG_HISTORY)
+		  history_expansion_inhibited = 1;
+#endif
+		}
+	      else
+		lex_firstind = -1;
+	    }
+	}
+
+      /* Meta-characters that can introduce a reserved word.  Not perfect yet. */
+      if MBTEST((tflags & LEX_RESWDOK) == 0 && (tflags & LEX_CKCASE) && (tflags & LEX_INCOMMENT) == 0 && (shellmeta(ch) || ch == '\n'))
+	{
+	  /* Add this character. */
+	  RESIZE_MALLOCED_BUFFER (ret, retind, 1, retsize, 64);
+	  ret[retind++] = ch;
+	  peekc = shell_getc (1);
+	  if (ch == peekc && (ch == '&' || ch == '|' || ch == ';'))	/* two-character tokens */
+	    {
+	      RESIZE_MALLOCED_BUFFER (ret, retind, 1, retsize, 64);
+	      ret[retind++] = peekc;
+/*itrace("parse_comsub:%d: set lex_reswordok = 1, ch = `%c'", line_number, ch);*/
+	      tflags |= LEX_RESWDOK;
+	      lex_rwlen = 0;
+	      continue;
+	    }
+	  else if (ch == '\n' || COMSUB_META(ch))
+	    {
+	      shell_ungetc (peekc);
+/*itrace("parse_comsub:%d: set lex_reswordok = 1, ch = `%c'", line_number, ch);*/
+	      tflags |= LEX_RESWDOK;
+	      lex_rwlen = 0;
+	      continue;
+	    }
+	  else if (ch == EOF)
+	    goto eof_error;
+	  else
+	    {
+	      /* `unget' the character we just added and fall through */
+	      retind--;
+	      shell_ungetc (peekc);
+	    }
+	}
+
+      /* If we can read a reserved word, try to read one. */
+      if (tflags & LEX_RESWDOK)
+	{
+	  if MBTEST(islower ((unsigned char)ch))
+	    {
+	      /* Add this character. */
+	      RESIZE_MALLOCED_BUFFER (ret, retind, 1, retsize, 64);
+	      ret[retind++] = ch;
+	      lex_rwlen++;
+	      continue;
+	    }
+	  else if MBTEST(lex_rwlen == 4 && shellbreak (ch))
+	    {
+	      if (STREQN (ret + retind - 4, "case", 4))
+		{
+		  tflags |= LEX_INCASE;
+		  tflags &= ~LEX_RESWDOK;
+/*itrace("parse_comsub:%d: found `case', lex_incase -> 1 lex_reswdok -> 0", line_number);*/
+		}
+	      else if (STREQN (ret + retind - 4, "esac", 4))
+		{
+		  tflags &= ~LEX_INCASE;
+/*itrace("parse_comsub:%d: found `esac', lex_incase -> 0 lex_reswdok -> 1", line_number);*/
+		  tflags |= LEX_RESWDOK;
+		  lex_rwlen = 0;
+		}
+	      else if (STREQN (ret + retind - 4, "done", 4) ||
+		       STREQN (ret + retind - 4, "then", 4) ||
+		       STREQN (ret + retind - 4, "else", 4) ||
+		       STREQN (ret + retind - 4, "elif", 4) ||
+		       STREQN (ret + retind - 4, "time", 4))
+		{
+		  /* these are four-character reserved words that can be
+		     followed by a reserved word; anything else turns off
+		     the reserved-word-ok flag */
+/*itrace("parse_comsub:%d: found `%.4s', lex_reswdok -> 1", line_number, ret+retind-4);*/
+		  tflags |= LEX_RESWDOK;
+		  lex_rwlen = 0;
+		}
+	       else if (shellmeta (ch) == 0)
+		{
+		  tflags &= ~LEX_RESWDOK;
+/*itrace("parse_comsub:%d: found `%.4s', lex_reswdok -> 0", line_number, ret+retind-4);*/
+		}
+	      else	/* can't be in a reserved word any more */
+	        lex_rwlen = 0;
+	    }
+	  else if MBTEST((tflags & LEX_CKCOMMENT) && ch == '#' && (lex_rwlen == 0 || ((tflags & LEX_INWORD) && lex_wlen == 0)))
+	    ;	/* don't modify LEX_RESWDOK if we're starting a comment */
+	  /* Allow `do' followed by space, tab, or newline to preserve the
+	     RESWDOK flag, but reset the reserved word length counter so we
+	     can read another one. */
+	  else if MBTEST(((tflags & LEX_INCASE) == 0) &&
+			  (isblank((unsigned char)ch) || ch == '\n') &&
+			  lex_rwlen == 2 &&
+			  STREQN (ret + retind - 2, "do", 2))
+	    {
+/*itrace("parse_comsub:%d: lex_incase == 0 found `%c', found \"do\"", line_number, ch);*/
+	      lex_rwlen = 0;
+	    }
+	  else if MBTEST((tflags & LEX_INCASE) && ch != '\n')
+	    /* If we can read a reserved word and we're in case, we're at the
+	       point where we can read a new pattern list or an esac.  We
+	       handle the esac case above.  If we read a newline, we want to
+	       leave LEX_RESWDOK alone.  If we read anything else, we want to
+	       turn off LEX_RESWDOK, since we're going to read a pattern list. */
+	    {
+	      tflags &= ~LEX_RESWDOK;
+/*itrace("parse_comsub:%d: lex_incase == 1 found `%c', lex_reswordok -> 0", line_number, ch);*/
+	    }
+	  else if MBTEST(shellbreak (ch) == 0)
+	    {
+	      tflags &= ~LEX_RESWDOK;
+/*itrace("parse_comsub:%d: found `%c', lex_reswordok -> 0", line_number, ch);*/
+	    }
+#if 0
+	  /* If we find a space or tab but have read something and it's not
+	     `do', turn off the reserved-word-ok flag */
+	  else if MBTEST(isblank ((unsigned char)ch) && lex_rwlen > 0)
+	    {
+	      tflags &= ~LEX_RESWDOK;
+/*itrace("parse_comsub:%d: found `%c', lex_reswordok -> 0", line_number, ch);*/
+	    }
+#endif
+	}
+
+      /* Might be the start of a here-doc delimiter */
+      if MBTEST((tflags & LEX_INCOMMENT) == 0 && (tflags & LEX_CKCASE) && ch == '<')
+	{
+	  /* Add this character. */
+	  RESIZE_MALLOCED_BUFFER (ret, retind, 1, retsize, 64);
+	  ret[retind++] = ch;
+	  peekc = shell_getc (1);
+	  if (peekc == EOF)
+	    goto eof_error;
+	  if (peekc == ch)
+	    {
+	      RESIZE_MALLOCED_BUFFER (ret, retind, 1, retsize, 64);
+	      ret[retind++] = peekc;
+	      peekc = shell_getc (1);
+	      if (peekc == EOF)
+		goto eof_error;
+	      if (peekc == '-')
+		{
+		  RESIZE_MALLOCED_BUFFER (ret, retind, 1, retsize, 64);
+		  ret[retind++] = peekc;
+		  tflags |= LEX_STRIPDOC;
+		}
+	      else
+		shell_ungetc (peekc);
+	      if (peekc != '<')
+		{
+		  tflags |= LEX_HEREDELIM;
+		  lex_firstind = -1;
+		}
+	      continue;
+	    }
+	  else
+	    {
+	      shell_ungetc (peekc);	/* not a here-doc, start over */
+	      continue;
+	    }
+	}
+      else if MBTEST((tflags & LEX_CKCOMMENT) && (tflags & LEX_INCOMMENT) == 0 && ch == '#' && (((tflags & LEX_RESWDOK) && lex_rwlen == 0) || ((tflags & LEX_INWORD) && lex_wlen == 0)))
+	{
+/*itrace("parse_comsub:%d: lex_incomment -> 1 (%d)", line_number, __LINE__);*/
+	  tflags |= LEX_INCOMMENT;
+	}
+
+      if MBTEST(ch == CTLESC || ch == CTLNUL)	/* special shell escapes */
+	{
+	  RESIZE_MALLOCED_BUFFER (ret, retind, 2, retsize, 64);
+	  ret[retind++] = CTLESC;
+	  ret[retind++] = ch;
+	  continue;
+	}
+#if 0
+      else if MBTEST((tflags & LEX_INCASE) && ch == close && close == ')')
+        tflags &= ~LEX_INCASE;		/* XXX */
+#endif
+      else if MBTEST(ch == close && (tflags & LEX_INCASE) == 0)		/* ending delimiter */
+	{
+	  count--;
+/*itrace("parse_comsub:%d: found close: count = %d", line_number, count);*/
+	}
+      else if MBTEST(((flags & P_FIRSTCLOSE) == 0) && (tflags & LEX_INCASE) == 0 && ch == open)	/* nested begin */
+	{
+	  count++;
+/*itrace("parse_comsub:%d: found open: count = %d", line_number, count);*/
+	}
+
+      /* Add this character. */
+      RESIZE_MALLOCED_BUFFER (ret, retind, 1, retsize, 64);
+      ret[retind++] = ch;
+
+      /* If we just read the ending character, don't bother continuing. */
+      if (count == 0)
+	break;
+
+      if MBTEST(ch == '\\')			/* backslashes */
+	tflags |= LEX_PASSNEXT;
+
+      if MBTEST(shellquote (ch))
+        {
+          /* '', ``, or "" inside $(...). */
+          push_delimiter (dstack, ch);
+          if MBTEST((tflags & LEX_WASDOL) && ch == '\'')	/* $'...' inside group */
+	    nestret = parse_matched_pair (ch, ch, ch, &nestlen, P_ALLOWESC|rflags);
+	  else
+	    nestret = parse_matched_pair (ch, ch, ch, &nestlen, rflags);
+	  pop_delimiter (dstack);
+	  CHECK_NESTRET_ERROR ();
+
+	  if MBTEST((tflags & LEX_WASDOL) && ch == '\'' && (extended_quote || (rflags & P_DQUOTE) == 0))
+	    {
+	      /* Translate $'...' here. */
+	      ttrans = ansiexpand (nestret, 0, nestlen - 1, &ttranslen);
+	      free (nestret);
+
+	      if ((rflags & P_DQUOTE) == 0)
+		{
+		  nestret = sh_single_quote (ttrans);
+		  free (ttrans);
+		  nestlen = strlen (nestret);
+		}
+	      else
+		{
+		  nestret = ttrans;
+		  nestlen = ttranslen;
+		}
+	      retind -= 2;		/* back up before the $' */
+	    }
+	  else if MBTEST((tflags & LEX_WASDOL) && ch == '"' && (extended_quote || (rflags & P_DQUOTE) == 0))
+	    {
+	      /* Locale expand $"..." here. */
+	      ttrans = localeexpand (nestret, 0, nestlen - 1, start_lineno, &ttranslen);
+	      free (nestret);
+
+	      nestret = sh_mkdoublequoted (ttrans, ttranslen, 0);
+	      free (ttrans);
+	      nestlen = ttranslen + 2;
+	      retind -= 2;		/* back up before the $" */
+	    }
+
+	  APPEND_NESTRET ();
+	  FREE (nestret);
+	}
+      else if MBTEST((tflags & LEX_WASDOL) && (ch == '(' || ch == '{' || ch == '['))	/* ) } ] */
+	/* check for $(), $[], or ${} inside command substitution. */
+	{
+	  if ((tflags & LEX_INCASE) == 0 && open == ch)	/* undo previous increment */
+	    count--;
+	  if (ch == '(')		/* ) */
+	    nestret = parse_comsub (0, '(', ')', &nestlen, (rflags|P_COMMAND) & ~P_DQUOTE);
+	  else if (ch == '{')		/* } */
+	    nestret = parse_matched_pair (0, '{', '}', &nestlen, P_FIRSTCLOSE|P_DOLBRACE|rflags);
+	  else if (ch == '[')		/* ] */
+	    nestret = parse_matched_pair (0, '[', ']', &nestlen, rflags);
+
+	  CHECK_NESTRET_ERROR ();
+	  APPEND_NESTRET ();
+
+	  FREE (nestret);
+	}
+      if MBTEST(ch == '$' && (tflags & LEX_WASDOL) == 0)
+	tflags |= LEX_WASDOL;
+      else
+	tflags &= ~LEX_WASDOL;
+    }
+
+#if defined (BANG_HISTORY)
+  history_expansion_inhibited = orig_histexp;
+#endif
+  FREE (heredelim);
+  ret[retind] = '\0';
+  if (lenp)
+    *lenp = retind;
+/*itrace("parse_comsub:%d: returning `%s'", line_number, ret);*/
+  return ret;
+}
+
+/* Recursively call the parser to parse a $(...) command substitution. */
+char *
+xparse_dolparen (base, string, indp, flags)
+     char *base;
+     char *string;
+     int *indp;
+     int flags;
+{
+  sh_parser_state_t ps;
+  sh_input_line_state_t ls;
+  int orig_ind, nc, sflags, orig_eof_token, start_lineno;
+  char *ret, *ep, *ostring;
+#if defined (ALIAS) || defined (DPAREN_ARITHMETIC)
+  STRING_SAVER *saved_pushed_strings;
+#endif
+
+/*debug_parser(1);*/
+  orig_ind = *indp;
+  ostring = string;
+  start_lineno = line_number;
+
+  if (*string == 0)
+    {
+      if (flags & SX_NOALLOC) 
+	return (char *)NULL;
+
+      ret = xmalloc (1);
+      ret[0] = '\0';
+      return ret;
+    }
+
+/*itrace("xparse_dolparen: size = %d shell_input_line = `%s' string=`%s'", shell_input_line_size, shell_input_line, string);*/
+  sflags = SEVAL_NONINT|SEVAL_NOHIST|SEVAL_NOFREE;
+  if (flags & SX_NOLONGJMP)
+    sflags |= SEVAL_NOLONGJMP;
+  save_parser_state (&ps);
+  save_input_line_state (&ls);
+  orig_eof_token = shell_eof_token;
+#if defined (ALIAS) || defined (DPAREN_ARITHMETIC)
+  saved_pushed_strings = pushed_string_list;	/* separate parsing context */
+  pushed_string_list = (STRING_SAVER *)NULL;
+#endif
+
+  /*(*/
+  parser_state |= PST_CMDSUBST|PST_EOFTOKEN;	/* allow instant ')' */ /*(*/
+  shell_eof_token = ')';
+
+  /* Should we save and restore the bison/yacc lookahead token (yychar) here?
+     Or only if it's not YYEMPTY? */
+
+  nc = parse_string (string, "command substitution", sflags, &ep);
+
+  if (current_token == shell_eof_token)
+    yyclearin;		/* might want to clear lookahead token unconditionally */
+
+  reset_parser ();
+  /* reset_parser() clears shell_input_line and associated variables, including
+     parser_state, so we want to reset things, then restore what we need. */
+  restore_input_line_state (&ls);
+
+  shell_eof_token = orig_eof_token;
+  restore_parser_state (&ps);
+
+#if defined (ALIAS) || defined (DPAREN_ARITHMETIC)
+  pushed_string_list = saved_pushed_strings;
+#endif
+
+  token_to_read = 0;
+
+  /* If parse_string returns < 0, we need to jump to top level with the
+     negative of the return value. We abandon the rest of this input line
+     first */
+  if (nc < 0)
+    {
+      clear_shell_input_line ();	/* XXX */
+      if (bash_input.type != st_string)	/* paranoia */
+	parser_state &= ~(PST_CMDSUBST|PST_EOFTOKEN);
+      jump_to_top_level (-nc);	/* XXX */
+    }
+
+  /* Need to find how many characters parse_and_execute consumed, update
+     *indp, if flags != 0, copy the portion of the string parsed into RET
+     and return it.  If flags & 1 (SX_NOALLOC) we can return NULL. */
+
+  /*(*/
+  if (ep[-1] != ')')
+    {
+#if DEBUG
+      if (ep[-1] != '\n')
+	itrace("xparse_dolparen:%d: ep[-1] != RPAREN (%d), ep = `%s'", line_number, ep[-1], ep);
+#endif
+
+      while (ep > ostring && ep[-1] == '\n') ep--;
+    }
+
+  nc = ep - ostring;
+  *indp = ep - base - 1;
+
+  /*((*/
+#if DEBUG
+  if (base[*indp] != ')')
+    itrace("xparse_dolparen:%d: base[%d] != RPAREN (%d), base = `%s'", line_number, *indp, base[*indp], base);
+  if (*indp < orig_ind)
+    itrace("xparse_dolparen:%d: *indp (%d) < orig_ind (%d), orig_string = `%s'", line_number, *indp, orig_ind, ostring);
+#endif
+
+  if (base[*indp] != ')')
+    {
+      /*(*/
+      parser_error (start_lineno, _("unexpected EOF while looking for matching `%c'"), ')');
+      jump_to_top_level (DISCARD);
+    }
+
+  if (flags & SX_NOALLOC) 
+    return (char *)NULL;
+
+  if (nc == 0)
+    {
+      ret = xmalloc (1);
+      ret[0] = '\0';
+    }
+  else
+    ret = substring (ostring, 0, nc - 1);
+
+  return ret;
+}
+
+#if defined (DPAREN_ARITHMETIC) || defined (ARITH_FOR_COMMAND)
+/* Parse a double-paren construct.  It can be either an arithmetic
+   command, an arithmetic `for' command, or a nested subshell.  Returns
+   the parsed token, -1 on error, or -2 if we didn't do anything and
+   should just go on. */
+static int
+parse_dparen (c)
+     int c;
+{
+  int cmdtyp, sline;
+  char *wval;
+  WORD_DESC *wd;
+
+#if defined (ARITH_FOR_COMMAND)
+  if (last_read_token == FOR)
+    {
+      arith_for_lineno = line_number;
+      cmdtyp = parse_arith_cmd (&wval, 0);
+      if (cmdtyp == 1)
+	{
+	  wd = alloc_word_desc ();
+	  wd->word = wval;
+	  yylval.word_list = make_word_list (wd, (WORD_LIST *)NULL);
+	  return (ARITH_FOR_EXPRS);
+	}
+      else
+	return -1;		/* ERROR */
+    }
+#endif
+
+#if defined (DPAREN_ARITHMETIC)
+  if (reserved_word_acceptable (last_read_token))
+    {
+      sline = line_number;
+
+      cmdtyp = parse_arith_cmd (&wval, 0);
+      if (cmdtyp == 1)	/* arithmetic command */
+	{
+	  wd = alloc_word_desc ();
+	  wd->word = wval;
+	  wd->flags = W_QUOTED|W_NOSPLIT|W_NOGLOB|W_DQUOTE;
+	  yylval.word_list = make_word_list (wd, (WORD_LIST *)NULL);
+	  return (ARITH_CMD);
+	}
+      else if (cmdtyp == 0)	/* nested subshell */
+	{
+	  push_string (wval, 0, (alias_t *)NULL);
+	  pushed_string_list->flags = PSH_DPAREN;
+	  if ((parser_state & PST_CASEPAT) == 0)
+	    parser_state |= PST_SUBSHELL;
+	  return (c);
+	}
+      else			/* ERROR */
+	return -1;
+    }
+#endif
+
+  return -2;			/* XXX */
+}
+
+/* We've seen a `(('.  Look for the matching `))'.  If we get it, return 1.
+   If not, assume it's a nested subshell for backwards compatibility and
+   return 0.  In any case, put the characters we've consumed into a locally-
+   allocated buffer and make *ep point to that buffer.  Return -1 on an
+   error, for example EOF. */
+static int
+parse_arith_cmd (ep, adddq)
+     char **ep;
+     int adddq;
+{
+  int exp_lineno, rval, c;
+  char *ttok, *tokstr;
+  int ttoklen;
+
+  exp_lineno = line_number;
+  ttok = parse_matched_pair (0, '(', ')', &ttoklen, 0);
+  rval = 1;
+  if (ttok == &matched_pair_error)
+    return -1;
+  /* Check that the next character is the closing right paren.  If
+     not, this is a syntax error. ( */
+  c = shell_getc (0);
+  if MBTEST(c != ')')
+    rval = 0;
+
+  tokstr = (char *)xmalloc (ttoklen + 4);
+
+  /* if ADDDQ != 0 then (( ... )) -> "..." */
+  if (rval == 1 && adddq)	/* arith cmd, add double quotes */
+    {
+      tokstr[0] = '"';
+      strncpy (tokstr + 1, ttok, ttoklen - 1);
+      tokstr[ttoklen] = '"';
+      tokstr[ttoklen+1] = '\0';
+    }
+  else if (rval == 1)		/* arith cmd, don't add double quotes */
+    {
+      strncpy (tokstr, ttok, ttoklen - 1);
+      tokstr[ttoklen-1] = '\0';
+    }
+  else				/* nested subshell */
+    {
+      tokstr[0] = '(';
+      strncpy (tokstr + 1, ttok, ttoklen - 1);
+      tokstr[ttoklen] = ')';
+      tokstr[ttoklen+1] = c;
+      tokstr[ttoklen+2] = '\0';
+    }
+
+  *ep = tokstr;
+  FREE (ttok);
+  return rval;
+}
+#endif /* DPAREN_ARITHMETIC || ARITH_FOR_COMMAND */
+
+#if defined (COND_COMMAND)
+static void
+cond_error ()
+{
+  char *etext;
+
+  if (EOF_Reached && cond_token != COND_ERROR)		/* [[ */
+    parser_error (cond_lineno, _("unexpected EOF while looking for `]]'"));
+  else if (cond_token != COND_ERROR)
+    {
+      if (etext = error_token_from_token (cond_token))
+	{
+	  parser_error (cond_lineno, _("syntax error in conditional expression: unexpected token `%s'"), etext);
+	  free (etext);
+	}
+      else
+	parser_error (cond_lineno, _("syntax error in conditional expression"));
+    }
+}
+
+static COND_COM *
+cond_expr ()
+{
+  return (cond_or ());  
+}
+
+static COND_COM *
+cond_or ()
+{
+  COND_COM *l, *r;
+
+  l = cond_and ();
+  if (cond_token == OR_OR)
+    {
+      r = cond_or ();
+      l = make_cond_node (COND_OR, (WORD_DESC *)NULL, l, r);
+    }
+  return l;
+}
+
+static COND_COM *
+cond_and ()
+{
+  COND_COM *l, *r;
+
+  l = cond_term ();
+  if (cond_token == AND_AND)
+    {
+      r = cond_and ();
+      l = make_cond_node (COND_AND, (WORD_DESC *)NULL, l, r);
+    }
+  return l;
+}
+
+static int
+cond_skip_newlines ()
+{
+  while ((cond_token = read_token (READ)) == '\n')
+    {
+      if (SHOULD_PROMPT ())
+	prompt_again ();
+    }
+  return (cond_token);
+}
+
+#define COND_RETURN_ERROR() \
+  do { cond_token = COND_ERROR; return ((COND_COM *)NULL); } while (0)
+
+static COND_COM *
+cond_term ()
+{
+  WORD_DESC *op;
+  COND_COM *term, *tleft, *tright;
+  int tok, lineno;
+  char *etext;
+
+  /* Read a token.  It can be a left paren, a `!', a unary operator, or a
+     word that should be the first argument of a binary operator.  Start by
+     skipping newlines, since this is a compound command. */
+  tok = cond_skip_newlines ();
+  lineno = line_number;
+  if (tok == COND_END)
+    {
+      COND_RETURN_ERROR ();
+    }
+  else if (tok == '(')
+    {
+      term = cond_expr ();
+      if (cond_token != ')')
+	{
+	  if (term)
+	    dispose_cond_node (term);		/* ( */
+	  if (etext = error_token_from_token (cond_token))
+	    {
+	      parser_error (lineno, _("unexpected token `%s', expected `)'"), etext);
+	      free (etext);
+	    }
+	  else
+	    parser_error (lineno, _("expected `)'"));
+	  COND_RETURN_ERROR ();
+	}
+      term = make_cond_node (COND_EXPR, (WORD_DESC *)NULL, term, (COND_COM *)NULL);
+      (void)cond_skip_newlines ();
+    }
+  else if (tok == BANG || (tok == WORD && (yylval.word->word[0] == '!' && yylval.word->word[1] == '\0')))
+    {
+      if (tok == WORD)
+	dispose_word (yylval.word);	/* not needed */
+      term = cond_term ();
+      if (term)
+	term->flags |= CMD_INVERT_RETURN;
+    }
+  else if (tok == WORD && yylval.word->word[0] == '-' && yylval.word->word[1] && yylval.word->word[2] == 0 && test_unop (yylval.word->word))
+    {
+      op = yylval.word;
+      tok = read_token (READ);
+      if (tok == WORD)
+	{
+	  tleft = make_cond_node (COND_TERM, yylval.word, (COND_COM *)NULL, (COND_COM *)NULL);
+	  term = make_cond_node (COND_UNARY, op, tleft, (COND_COM *)NULL);
+	}
+      else
+	{
+	  dispose_word (op);
+	  if (etext = error_token_from_token (tok))
+	    {
+	      parser_error (line_number, _("unexpected argument `%s' to conditional unary operator"), etext);
+	      free (etext);
+	    }
+	  else
+	    parser_error (line_number, _("unexpected argument to conditional unary operator"));
+	  COND_RETURN_ERROR ();
+	}
+
+      (void)cond_skip_newlines ();
+    }
+  else if (tok == WORD)		/* left argument to binary operator */
+    {
+      /* lhs */
+      tleft = make_cond_node (COND_TERM, yylval.word, (COND_COM *)NULL, (COND_COM *)NULL);
+
+      /* binop */
+      tok = read_token (READ);
+      if (tok == WORD && test_binop (yylval.word->word))
+	{
+	  op = yylval.word;
+	  if (op->word[0] == '=' && (op->word[1] == '\0' || (op->word[1] == '=' && op->word[2] == '\0')))
+	    parser_state |= PST_EXTPAT;
+	  else if (op->word[0] == '!' && op->word[1] == '=' && op->word[2] == '\0')
+	    parser_state |= PST_EXTPAT;
+	}
+#if defined (COND_REGEXP)
+      else if (tok == WORD && STREQ (yylval.word->word, "=~"))
+	{
+	  op = yylval.word;
+	  parser_state |= PST_REGEXP;
+	}
+#endif
+      else if (tok == '<' || tok == '>')
+	op = make_word_from_token (tok);  /* ( */
+      /* There should be a check before blindly accepting the `)' that we have
+	 seen the opening `('. */
+      else if (tok == COND_END || tok == AND_AND || tok == OR_OR || tok == ')')
+	{
+	  /* Special case.  [[ x ]] is equivalent to [[ -n x ]], just like
+	     the test command.  Similarly for [[ x && expr ]] or
+	     [[ x || expr ]] or [[ (x) ]]. */
+	  op = make_word ("-n");
+	  term = make_cond_node (COND_UNARY, op, tleft, (COND_COM *)NULL);
+	  cond_token = tok;
+	  return (term);
+	}
+      else
+	{
+	  if (etext = error_token_from_token (tok))
+	    {
+	      parser_error (line_number, _("unexpected token `%s', conditional binary operator expected"), etext);
+	      free (etext);
+	    }
+	  else
+	    parser_error (line_number, _("conditional binary operator expected"));
+	  dispose_cond_node (tleft);
+	  COND_RETURN_ERROR ();
+	}
+
+      /* rhs */
+      if (parser_state & PST_EXTPAT)
+	extended_glob = 1;
+      tok = read_token (READ);
+      if (parser_state & PST_EXTPAT)
+	extended_glob = global_extglob;
+      parser_state &= ~(PST_REGEXP|PST_EXTPAT);
+
+      if (tok == WORD)
+	{
+	  tright = make_cond_node (COND_TERM, yylval.word, (COND_COM *)NULL, (COND_COM *)NULL);
+	  term = make_cond_node (COND_BINARY, op, tleft, tright);
+	}
+      else
+	{
+	  if (etext = error_token_from_token (tok))
+	    {
+	      parser_error (line_number, _("unexpected argument `%s' to conditional binary operator"), etext);
+	      free (etext);
+	    }
+	  else
+	    parser_error (line_number, _("unexpected argument to conditional binary operator"));
+	  dispose_cond_node (tleft);
+	  dispose_word (op);
+	  COND_RETURN_ERROR ();
+	}
+
+      (void)cond_skip_newlines ();
+    }
+  else
+    {
+      if (tok < 256)
+	parser_error (line_number, _("unexpected token `%c' in conditional command"), tok);
+      else if (etext = error_token_from_token (tok))
+	{
+	  parser_error (line_number, _("unexpected token `%s' in conditional command"), etext);
+	  free (etext);
+	}
+      else
+	parser_error (line_number, _("unexpected token %d in conditional command"), tok);
+      COND_RETURN_ERROR ();
+    }
+  return (term);
+}      
+
+/* This is kind of bogus -- we slip a mini recursive-descent parser in
+   here to handle the conditional statement syntax. */
+static COMMAND *
+parse_cond_command ()
+{
+  COND_COM *cexp;
+
+  global_extglob = extended_glob;
+  cexp = cond_expr ();
+  return (make_cond_command (cexp));
+}
+#endif
+
+#if defined (ARRAY_VARS)
+/* When this is called, it's guaranteed that we don't care about anything
+   in t beyond i.  We use a buffer with room for the characters we add just
+   in case assignment() ends up doing something like parsing a command
+   substitution that will reallocate atoken.  We don't want to write beyond
+   the end of an allocated buffer. */
+static int
+token_is_assignment (t, i)
+     char *t;
+     int i;
+{
+  int r;
+  char *atoken;
+
+  atoken = xmalloc (i + 3);
+  memcpy (atoken, t, i);
+  atoken[i] = '=';
+  atoken[i+1] = '\0';
+
+  r = assignment (atoken, (parser_state & PST_COMPASSIGN) != 0);
+
+  free (atoken);
+
+  /* XXX - check that r == i to avoid returning false positive for
+     t containing `=' before t[i]. */
+  return (r > 0 && r == i);
+}
+
+/* XXX - possible changes here for `+=' */
+static int
+token_is_ident (t, i)
+     char *t;
+     int i;
+{
+  unsigned char c;
+  int r;
+
+  c = t[i];
+  t[i] = '\0';
+  r = legal_identifier (t);
+  t[i] = c;
+  return r;
+}
+#endif
+
+static int
+read_token_word (character)
+     int character;
+{
+  /* The value for YYLVAL when a WORD is read. */
+  WORD_DESC *the_word;
+
+  /* Index into the token that we are building. */
+  int token_index;
+
+  /* ALL_DIGITS becomes zero when we see a non-digit. */
+  int all_digit_token;
+
+  /* DOLLAR_PRESENT becomes non-zero if we see a `$'. */
+  int dollar_present;
+
+  /* COMPOUND_ASSIGNMENT becomes non-zero if we are parsing a compound
+     assignment. */
+  int compound_assignment;
+
+  /* QUOTED becomes non-zero if we see one of ("), ('), (`), or (\). */
+  int quoted;
+
+  /* Non-zero means to ignore the value of the next character, and just
+     to add it no matter what. */
+  int pass_next_character;
+
+  /* The current delimiting character. */
+  int cd;
+  int result, peek_char;
+  char *ttok, *ttrans;
+  int ttoklen, ttranslen;
+  intmax_t lvalue;
+
+  if (token_buffer_size < TOKEN_DEFAULT_INITIAL_SIZE)
+    token = (char *)xrealloc (token, token_buffer_size = TOKEN_DEFAULT_INITIAL_SIZE);
+
+  token_index = 0;
+  all_digit_token = DIGIT (character);
+  dollar_present = quoted = pass_next_character = compound_assignment = 0;
+
+  for (;;)
+    {
+      if (character == EOF)
+	goto got_token;
+
+      if (pass_next_character)
+	{
+	  pass_next_character = 0;
+	  goto got_escaped_character;
+	}
+
+      cd = current_delimiter (dstack);
+
+      /* Handle backslashes.  Quote lots of things when not inside of
+	 double-quotes, quote some things inside of double-quotes. */
+      if MBTEST(character == '\\')
+	{
+	  peek_char = shell_getc (0);
+
+	  /* Backslash-newline is ignored in all cases except
+	     when quoted with single quotes. */
+	  if (peek_char == '\n')
+	    {
+	      character = '\n';
+	      goto next_character;
+	    }
+	  else
+	    {
+	      shell_ungetc (peek_char);
+
+	      /* If the next character is to be quoted, note it now. */
+	      if (cd == 0 || cd == '`' ||
+		  (cd == '"' && peek_char >= 0 && (sh_syntaxtab[peek_char] & CBSDQUOTE)))
+		pass_next_character++;
+
+	      quoted = 1;
+	      goto got_character;
+	    }
+	}
+
+      /* Parse a matched pair of quote characters. */
+      if MBTEST(shellquote (character))
+	{
+	  push_delimiter (dstack, character);
+	  ttok = parse_matched_pair (character, character, character, &ttoklen, (character == '`') ? P_COMMAND : 0);
+	  pop_delimiter (dstack);
+	  if (ttok == &matched_pair_error)
+	    return -1;		/* Bail immediately. */
+	  RESIZE_MALLOCED_BUFFER (token, token_index, ttoklen + 2,
+				  token_buffer_size, TOKEN_DEFAULT_GROW_SIZE);
+	  token[token_index++] = character;
+	  strcpy (token + token_index, ttok);
+	  token_index += ttoklen;
+	  all_digit_token = 0;
+	  if (character != '`')
+	    quoted = 1;
+	  dollar_present |= (character == '"' && strchr (ttok, '$') != 0);
+	  FREE (ttok);
+	  goto next_character;
+	}
+
+#ifdef COND_REGEXP
+      /* When parsing a regexp as a single word inside a conditional command,
+	 we need to special-case characters special to both the shell and
+	 regular expressions.  Right now, that is only '(' and '|'. */ /*)*/
+      if MBTEST((parser_state & PST_REGEXP) && (character == '(' || character == '|'))		/*)*/
+	{
+	  if (character == '|')
+	    goto got_character;
+
+	  push_delimiter (dstack, character);
+	  ttok = parse_matched_pair (cd, '(', ')', &ttoklen, 0);
+	  pop_delimiter (dstack);
+	  if (ttok == &matched_pair_error)
+	    return -1;		/* Bail immediately. */
+	  RESIZE_MALLOCED_BUFFER (token, token_index, ttoklen + 2,
+				  token_buffer_size, TOKEN_DEFAULT_GROW_SIZE);
+	  token[token_index++] = character;
+	  strcpy (token + token_index, ttok);
+	  token_index += ttoklen;
+	  FREE (ttok);
+	  dollar_present = all_digit_token = 0;
+	  goto next_character;
+	}
+#endif /* COND_REGEXP */
+
+#ifdef EXTENDED_GLOB
+      /* Parse a ksh-style extended pattern matching specification. */
+      if MBTEST(extended_glob && PATTERN_CHAR (character))
+	{
+	  peek_char = shell_getc (1);
+	  if MBTEST(peek_char == '(')		/* ) */
+	    {
+	      push_delimiter (dstack, peek_char);
+	      ttok = parse_matched_pair (cd, '(', ')', &ttoklen, 0);
+	      pop_delimiter (dstack);
+	      if (ttok == &matched_pair_error)
+		return -1;		/* Bail immediately. */
+	      RESIZE_MALLOCED_BUFFER (token, token_index, ttoklen + 3,
+				      token_buffer_size,
+				      TOKEN_DEFAULT_GROW_SIZE);
+	      token[token_index++] = character;
+	      token[token_index++] = peek_char;
+	      strcpy (token + token_index, ttok);
+	      token_index += ttoklen;
+	      FREE (ttok);
+	      dollar_present = all_digit_token = 0;
+	      goto next_character;
+	    }
+	  else
+	    shell_ungetc (peek_char);
+	}
+#endif /* EXTENDED_GLOB */
+
+      /* If the delimiter character is not single quote, parse some of
+	 the shell expansions that must be read as a single word. */
+      if (shellexp (character))
+	{
+	  peek_char = shell_getc (1);
+	  /* $(...), <(...), >(...), $((...)), ${...}, and $[...] constructs */
+	  if MBTEST(peek_char == '(' ||
+		((peek_char == '{' || peek_char == '[') && character == '$'))	/* ) ] } */
+	    {
+	      if (peek_char == '{')		/* } */
+		ttok = parse_matched_pair (cd, '{', '}', &ttoklen, P_FIRSTCLOSE|P_DOLBRACE);
+	      else if (peek_char == '(')		/* ) */
+		{
+		  /* XXX - push and pop the `(' as a delimiter for use by
+		     the command-oriented-history code.  This way newlines
+		     appearing in the $(...) string get added to the
+		     history literally rather than causing a possibly-
+		     incorrect `;' to be added. ) */
+		  push_delimiter (dstack, peek_char);
+		  ttok = parse_comsub (cd, '(', ')', &ttoklen, P_COMMAND);
+		  pop_delimiter (dstack);
+		}
+	      else
+		ttok = parse_matched_pair (cd, '[', ']', &ttoklen, 0);
+	      if (ttok == &matched_pair_error)
+		return -1;		/* Bail immediately. */
+	      RESIZE_MALLOCED_BUFFER (token, token_index, ttoklen + 3,
+				      token_buffer_size,
+				      TOKEN_DEFAULT_GROW_SIZE);
+	      token[token_index++] = character;
+	      token[token_index++] = peek_char;
+	      strcpy (token + token_index, ttok);
+	      token_index += ttoklen;
+	      FREE (ttok);
+	      dollar_present = 1;
+	      all_digit_token = 0;
+	      goto next_character;
+	    }
+	  /* This handles $'...' and $"..." new-style quoted strings. */
+	  else if MBTEST(character == '$' && (peek_char == '\'' || peek_char == '"'))
+	    {
+	      int first_line;
+
+	      first_line = line_number;
+	      push_delimiter (dstack, peek_char);
+	      ttok = parse_matched_pair (peek_char, peek_char, peek_char,
+					 &ttoklen,
+					 (peek_char == '\'') ? P_ALLOWESC : 0);
+	      pop_delimiter (dstack);
+	      if (ttok == &matched_pair_error)
+		return -1;
+	      if (peek_char == '\'')
+		{
+		  ttrans = ansiexpand (ttok, 0, ttoklen - 1, &ttranslen);
+		  free (ttok);
+
+		  /* Insert the single quotes and correctly quote any
+		     embedded single quotes (allowed because P_ALLOWESC was
+		     passed to parse_matched_pair). */
+		  ttok = sh_single_quote (ttrans);
+		  free (ttrans);
+		  ttranslen = strlen (ttok);
+		  ttrans = ttok;
+		}
+	      else
+		{
+		  /* Try to locale-expand the converted string. */
+		  ttrans = localeexpand (ttok, 0, ttoklen - 1, first_line, &ttranslen);
+		  free (ttok);
+
+		  /* Add the double quotes back */
+		  ttok = sh_mkdoublequoted (ttrans, ttranslen, 0);
+		  free (ttrans);
+		  ttranslen += 2;
+		  ttrans = ttok;
+		}
+
+	      RESIZE_MALLOCED_BUFFER (token, token_index, ttranslen + 1,
+				      token_buffer_size,
+				      TOKEN_DEFAULT_GROW_SIZE);
+	      strcpy (token + token_index, ttrans);
+	      token_index += ttranslen;
+	      FREE (ttrans);
+	      quoted = 1;
+	      all_digit_token = 0;
+	      goto next_character;
+	    }
+	  /* This could eventually be extended to recognize all of the
+	     shell's single-character parameter expansions, and set flags.*/
+	  else if MBTEST(character == '$' && peek_char == '$')
+	    {
+	      RESIZE_MALLOCED_BUFFER (token, token_index, 3,
+				      token_buffer_size,
+				      TOKEN_DEFAULT_GROW_SIZE);
+	      token[token_index++] = '$';
+	      token[token_index++] = peek_char;
+	      dollar_present = 1;
+	      all_digit_token = 0;
+	      goto next_character;
+	    }
+	  else
+	    shell_ungetc (peek_char);
+	}
+
+#if defined (ARRAY_VARS)
+      /* Identify possible array subscript assignment; match [...].  If
+	 parser_state&PST_COMPASSIGN, we need to parse [sub]=words treating
+	 `sub' as if it were enclosed in double quotes. */
+      else if MBTEST(character == '[' &&		/* ] */
+		     ((token_index > 0 && assignment_acceptable (last_read_token) && token_is_ident (token, token_index)) ||
+		      (token_index == 0 && (parser_state&PST_COMPASSIGN))))
+        {
+	  ttok = parse_matched_pair (cd, '[', ']', &ttoklen, P_ARRAYSUB);
+	  if (ttok == &matched_pair_error)
+	    return -1;		/* Bail immediately. */
+	  RESIZE_MALLOCED_BUFFER (token, token_index, ttoklen + 2,
+				  token_buffer_size,
+				  TOKEN_DEFAULT_GROW_SIZE);
+	  token[token_index++] = character;
+	  strcpy (token + token_index, ttok);
+	  token_index += ttoklen;
+	  FREE (ttok);
+	  all_digit_token = 0;
+	  goto next_character;
+        }
+      /* Identify possible compound array variable assignment. */
+      else if MBTEST(character == '=' && token_index > 0 && (assignment_acceptable (last_read_token) || (parser_state & PST_ASSIGNOK)) && token_is_assignment (token, token_index))
+	{
+	  peek_char = shell_getc (1);
+	  if MBTEST(peek_char == '(')		/* ) */
+	    {
+	      ttok = parse_compound_assignment (&ttoklen);
+
+	      RESIZE_MALLOCED_BUFFER (token, token_index, ttoklen + 4,
+				      token_buffer_size,
+				      TOKEN_DEFAULT_GROW_SIZE);
+
+	      token[token_index++] = '=';
+	      token[token_index++] = '(';
+	      if (ttok)
+		{
+		  strcpy (token + token_index, ttok);
+		  token_index += ttoklen;
+		}
+	      token[token_index++] = ')';
+	      FREE (ttok);
+	      all_digit_token = 0;
+	      compound_assignment = 1;
+#if 1
+	      goto next_character;
+#else
+	      goto got_token;		/* ksh93 seems to do this */
+#endif
+	    }
+	  else
+	    shell_ungetc (peek_char);
+	}
+#endif
+
+      /* When not parsing a multi-character word construct, shell meta-
+	 characters break words. */
+      if MBTEST(shellbreak (character))
+	{
+	  shell_ungetc (character);
+	  goto got_token;
+	}
+
+got_character:
+      if (character == CTLESC || character == CTLNUL)
+	{
+	  RESIZE_MALLOCED_BUFFER (token, token_index, 2, token_buffer_size,
+				  TOKEN_DEFAULT_GROW_SIZE);
+	  token[token_index++] = CTLESC;
+	}
+      else
+got_escaped_character:
+	RESIZE_MALLOCED_BUFFER (token, token_index, 1, token_buffer_size,
+				TOKEN_DEFAULT_GROW_SIZE);
+
+      token[token_index++] = character;
+
+      all_digit_token &= DIGIT (character);
+      dollar_present |= character == '$';
+
+    next_character:
+      if (character == '\n' && SHOULD_PROMPT ())
+	prompt_again ();
+
+      /* We want to remove quoted newlines (that is, a \<newline> pair)
+	 unless we are within single quotes or pass_next_character is
+	 set (the shell equivalent of literal-next). */
+      cd = current_delimiter (dstack);
+      character = shell_getc (cd != '\'' && pass_next_character == 0);
+    }	/* end for (;;) */
+
+got_token:
+
+  /* Calls to RESIZE_MALLOCED_BUFFER ensure there is sufficient room. */
+  token[token_index] = '\0';
+
+  /* Check to see what thing we should return.  If the last_read_token
+     is a `<', or a `&', or the character which ended this token is
+     a '>' or '<', then, and ONLY then, is this input token a NUMBER.
+     Otherwise, it is just a word, and should be returned as such. */
+  if MBTEST(all_digit_token && (character == '<' || character == '>' ||
+		    last_read_token == LESS_AND ||
+		    last_read_token == GREATER_AND))
+      {
+	if (legal_number (token, &lvalue) && (int)lvalue == lvalue)
+	  {
+	    yylval.number = lvalue;
+	    return (NUMBER);
+	  }
+      }
+
+  /* Check for special case tokens. */
+  result = (last_shell_getc_is_singlebyte) ? special_case_tokens (token) : -1;
+  if (result >= 0)
+    return result;
+
+#if defined (ALIAS)
+  /* Posix.2 does not allow reserved words to be aliased, so check for all
+     of them, including special cases, before expanding the current token
+     as an alias. */
+  if MBTEST(posixly_correct)
+    CHECK_FOR_RESERVED_WORD (token);
+
+  /* Aliases are expanded iff EXPAND_ALIASES is non-zero, and quoting
+     inhibits alias expansion. */
+  if (expand_aliases && quoted == 0)
+    {
+      result = alias_expand_token (token);
+      if (result == RE_READ_TOKEN)
+	return (RE_READ_TOKEN);
+      else if (result == NO_EXPANSION)
+	parser_state &= ~PST_ALEXPNEXT;
+    }
+
+  /* If not in Posix.2 mode, check for reserved words after alias
+     expansion. */
+  if MBTEST(posixly_correct == 0)
+#endif
+    CHECK_FOR_RESERVED_WORD (token);
+
+  the_word = alloc_word_desc ();
+  the_word->word = (char *)xmalloc (1 + token_index);
+  the_word->flags = 0;
+  strcpy (the_word->word, token);
+  if (dollar_present)
+    the_word->flags |= W_HASDOLLAR;
+  if (quoted)
+    the_word->flags |= W_QUOTED;		/*(*/
+  if (compound_assignment && token[token_index-1] == ')')
+    the_word->flags |= W_COMPASSIGN;
+  /* A word is an assignment if it appears at the beginning of a
+     simple command, or after another assignment word.  This is
+     context-dependent, so it cannot be handled in the grammar. */
+  if (assignment (token, (parser_state & PST_COMPASSIGN) != 0))
+    {
+      the_word->flags |= W_ASSIGNMENT;
+      /* Don't perform word splitting on assignment statements. */
+      if (assignment_acceptable (last_read_token) || (parser_state & PST_COMPASSIGN) != 0)
+	{
+	  the_word->flags |= W_NOSPLIT;
+	  if (parser_state & PST_COMPASSIGN)
+	    the_word->flags |= W_NOGLOB;	/* XXX - W_NOBRACE? */
+	}
+    }
+
+  if (command_token_position (last_read_token))
+    {
+      struct builtin *b;
+      b = builtin_address_internal (token, 0);
+      if (b && (b->flags & ASSIGNMENT_BUILTIN))
+	parser_state |= PST_ASSIGNOK;
+      else if (STREQ (token, "eval") || STREQ (token, "let"))
+	parser_state |= PST_ASSIGNOK;
+    }
+
+  yylval.word = the_word;
+
+  /* should we check that quoted == 0 as well? */
+  if (token[0] == '{' && token[token_index-1] == '}' &&
+      (character == '<' || character == '>'))
+    {
+      /* can use token; already copied to the_word */
+      token[token_index-1] = '\0';
+#if defined (ARRAY_VARS)
+      if (legal_identifier (token+1) || valid_array_reference (token+1, 0))
+#else
+      if (legal_identifier (token+1))
+#endif
+	{
+	  strcpy (the_word->word, token+1);
+/* itrace("read_token_word: returning REDIR_WORD for %s", the_word->word); */
+	  yylval.word = the_word;	/* accommodate recursive call */
+	  return (REDIR_WORD);
+	}
+      else
+        /* valid_array_reference can call the parser recursively; need to
+	   make sure that yylval.word doesn't change if we are going to
+	   return WORD or ASSIGNMENT_WORD */
+        yylval.word = the_word;
+    }
+
+  result = ((the_word->flags & (W_ASSIGNMENT|W_NOSPLIT)) == (W_ASSIGNMENT|W_NOSPLIT))
+		? ASSIGNMENT_WORD : WORD;
+
+  switch (last_read_token)
+    {
+    case FUNCTION:
+      parser_state |= PST_ALLOWOPNBRC;
+      function_dstart = line_number;
+      break;
+    case CASE:
+    case SELECT:
+    case FOR:
+      if (word_top < MAX_CASE_NEST)
+	word_top++;
+      word_lineno[word_top] = line_number;
+      expecting_in_token++;
+      break;
+    }
+
+  return (result);
+}
+
+/* Return 1 if TOKSYM is a token that after being read would allow
+   a reserved word to be seen, else 0. */
+static int
+reserved_word_acceptable (toksym)
+     int toksym;
+{
+  switch (toksym)
+    {
+    case '\n':
+    case ';':
+    case '(':
+    case ')':
+    case '|':
+    case '&':
+    case '{':
+    case '}':		/* XXX */
+    case AND_AND:
+    case BANG:
+    case BAR_AND:
+    case DO:
+    case DONE:
+    case ELIF:
+    case ELSE:
+    case ESAC:
+    case FI:
+    case IF:
+    case OR_OR:
+    case SEMI_SEMI:
+    case SEMI_AND:
+    case SEMI_SEMI_AND:
+    case THEN:
+    case TIME:
+    case TIMEOPT:
+    case TIMEIGN:
+    case COPROC:
+    case UNTIL:
+    case WHILE:
+    case 0:
+      return 1;
+    default:
+#if defined (COPROCESS_SUPPORT)
+      if (last_read_token == WORD && token_before_that == COPROC)
+	return 1;
+#endif
+      if (last_read_token == WORD && token_before_that == FUNCTION)
+	return 1;
+      return 0;
+    }
+}
+    
+/* Return the index of TOKEN in the alist of reserved words, or -1 if
+   TOKEN is not a shell reserved word. */
+int
+find_reserved_word (tokstr)
+     char *tokstr;
+{
+  int i;
+  for (i = 0; word_token_alist[i].word; i++)
+    if (STREQ (tokstr, word_token_alist[i].word))
+      return i;
+  return -1;
+}
+
+/* An interface to let the rest of the shell (primarily the completion
+   system) know what the parser is expecting. */
+int
+parser_in_command_position ()
+{
+  return (command_token_position (last_read_token));
+}
+
+#if 0
+#if defined (READLINE)
+/* Called after each time readline is called.  This insures that whatever
+   the new prompt string is gets propagated to readline's local prompt
+   variable. */
+static void
+reset_readline_prompt ()
+{
+  char *temp_prompt;
+
+  if (prompt_string_pointer)
+    {
+      temp_prompt = (*prompt_string_pointer)
+			? decode_prompt_string (*prompt_string_pointer)
+			: (char *)NULL;
+
+      if (temp_prompt == 0)
+	{
+	  temp_prompt = (char *)xmalloc (1);
+	  temp_prompt[0] = '\0';
+	}
+
+      FREE (current_readline_prompt);
+      current_readline_prompt = temp_prompt;
+    }
+}
+#endif /* READLINE */
+#endif /* 0 */
+
+#if defined (HISTORY)
+/* A list of tokens which can be followed by newlines, but not by
+   semi-colons.  When concatenating multiple lines of history, the
+   newline separator for such tokens is replaced with a space. */
+static const int no_semi_successors[] = {
+  '\n', '{', '(', ')', ';', '&', '|',
+  CASE, DO, ELSE, IF, SEMI_SEMI, SEMI_AND, SEMI_SEMI_AND, THEN, UNTIL,
+  WHILE, AND_AND, OR_OR, IN,
+  0
+};
+
+/* If we are not within a delimited expression, try to be smart
+   about which separators can be semi-colons and which must be
+   newlines.  Returns the string that should be added into the
+   history entry.  LINE is the line we're about to add; it helps
+   make some more intelligent decisions in certain cases. */
+char *
+history_delimiting_chars (line)
+     const char *line;
+{
+  static int last_was_heredoc = 0;	/* was the last entry the start of a here document? */
+  register int i;
+
+  if ((parser_state & PST_HEREDOC) == 0)
+    last_was_heredoc = 0;
+
+  if (dstack.delimiter_depth != 0)
+    return ("\n");
+
+  /* We look for current_command_line_count == 2 because we are looking to
+     add the first line of the body of the here document (the second line
+     of the command).  We also keep LAST_WAS_HEREDOC as a private sentinel
+     variable to note when we think we added the first line of a here doc
+     (the one with a "<<" somewhere in it) */
+  if (parser_state & PST_HEREDOC)
+    {
+      if (last_was_heredoc)
+	{
+	  last_was_heredoc = 0;
+	  return "\n";
+	}
+      return (here_doc_first_line ? "\n" : "");
+    }
+
+  if (parser_state & PST_COMPASSIGN)
+    return (" ");
+
+  /* First, handle some special cases. */
+  /*(*/
+  /* If we just read `()', assume it's a function definition, and don't
+     add a semicolon.  If the token before the `)' was not `(', and we're
+     not in the midst of parsing a case statement, assume it's a
+     parenthesized command and add the semicolon. */
+  /*)(*/
+  if (token_before_that == ')')
+    {
+      if (two_tokens_ago == '(')	/*)*/	/* function def */
+	return " ";
+      /* This does not work for subshells inside case statement
+	 command lists.  It's a suboptimal solution. */
+      else if (parser_state & PST_CASESTMT)	/* case statement pattern */
+	return " ";
+      else
+	return "; ";				/* (...) subshell */
+    }
+  else if (token_before_that == WORD && two_tokens_ago == FUNCTION)
+    return " ";		/* function def using `function name' without `()' */
+
+  /* If we're not in a here document, but we think we're about to parse one,
+     and we would otherwise return a `;', return a newline to delimit the
+     line with the here-doc delimiter */
+  else if ((parser_state & PST_HEREDOC) == 0 && current_command_line_count > 1 && last_read_token == '\n' && strstr (line, "<<"))
+    {
+      last_was_heredoc = 1;
+      return "\n";
+    }
+  else if ((parser_state & PST_HEREDOC) == 0 && current_command_line_count > 1 && need_here_doc > 0)
+    return "\n";
+  else if (token_before_that == WORD && two_tokens_ago == FOR)
+    {
+      /* Tricky.  `for i\nin ...' should not have a semicolon, but
+	 `for i\ndo ...' should.  We do what we can. */
+      for (i = shell_input_line_index; whitespace (shell_input_line[i]); i++)
+	;
+      if (shell_input_line[i] && shell_input_line[i] == 'i' && shell_input_line[i+1] == 'n')
+	return " ";
+      return ";";
+    }
+  else if (two_tokens_ago == CASE && token_before_that == WORD && (parser_state & PST_CASESTMT))
+    return " ";
+
+  for (i = 0; no_semi_successors[i]; i++)
+    {
+      if (token_before_that == no_semi_successors[i])
+	return (" ");
+    }
+
+  if (line_isblank (line))
+    return ("");
+
+  return ("; ");
+}
+#endif /* HISTORY */
+
+/* Issue a prompt, or prepare to issue a prompt when the next character
+   is read. */
+static void
+prompt_again ()
+{
+  char *temp_prompt;
+
+  if (interactive == 0 || expanding_alias ())	/* XXX */
+    return;
+
+  ps1_prompt = get_string_value ("PS1");
+  ps2_prompt = get_string_value ("PS2");
+
+  ps0_prompt = get_string_value ("PS0");
+
+  if (!prompt_string_pointer)
+    prompt_string_pointer = &ps1_prompt;
+
+  temp_prompt = *prompt_string_pointer
+			? decode_prompt_string (*prompt_string_pointer)
+			: (char *)NULL;
+
+  if (temp_prompt == 0)
+    {
+      temp_prompt = (char *)xmalloc (1);
+      temp_prompt[0] = '\0';
+    }
+
+  current_prompt_string = *prompt_string_pointer;
+  prompt_string_pointer = &ps2_prompt;
+
+#if defined (READLINE)
+  if (!no_line_editing)
+    {
+      FREE (current_readline_prompt);
+      current_readline_prompt = temp_prompt;
+    }
+  else
+#endif	/* READLINE */
+    {
+      FREE (current_decoded_prompt);
+      current_decoded_prompt = temp_prompt;
+    }
+}
+
+int
+get_current_prompt_level ()
+{
+  return ((current_prompt_string && current_prompt_string == ps2_prompt) ? 2 : 1);
+}
+
+void
+set_current_prompt_level (x)
+     int x;
+{
+  prompt_string_pointer = (x == 2) ? &ps2_prompt : &ps1_prompt;
+  current_prompt_string = *prompt_string_pointer;
+}
+      
+static void
+print_prompt ()
+{
+  fprintf (stderr, "%s", current_decoded_prompt);
+  fflush (stderr);
+}
+
+#if defined (HISTORY)
+  /* The history library increments the history offset as soon as it stores
+     the first line of a potentially multi-line command, so we compensate
+     here by returning one fewer when appropriate. */
+static int
+prompt_history_number (pmt)
+     char *pmt;
+{
+  int ret;
+
+  ret = history_number ();
+  if (ret == 1)
+    return ret;
+
+  if (pmt == ps1_prompt)	/* are we expanding $PS1? */
+    return ret;
+  else if (pmt == ps2_prompt && command_oriented_history == 0)
+    return ret;			/* not command oriented history */
+  else if (pmt == ps2_prompt && command_oriented_history && current_command_first_line_saved)
+    return ret - 1;
+  else
+    return ret - 1;		/* PS0, PS4, ${var@P}, PS2 other cases */
+}
+#endif
+
+/* Return a string which will be printed as a prompt.  The string
+   may contain special characters which are decoded as follows:
+
+	\a	bell (ascii 07)
+	\d	the date in Day Mon Date format
+	\e	escape (ascii 033)
+	\h	the hostname up to the first `.'
+	\H	the hostname
+	\j	the number of active jobs
+	\l	the basename of the shell's tty device name
+	\n	CRLF
+	\r	CR
+	\s	the name of the shell
+	\t	the time in 24-hour hh:mm:ss format
+	\T	the time in 12-hour hh:mm:ss format
+	\@	the time in 12-hour hh:mm am/pm format
+	\A	the time in 24-hour hh:mm format
+	\D{fmt}	the result of passing FMT to strftime(3)
+	\u	your username
+	\v	the version of bash (e.g., 2.00)
+	\V	the release of bash, version + patchlevel (e.g., 2.00.0)
+	\w	the current working directory
+	\W	the last element of $PWD
+	\!	the history number of this command
+	\#	the command number of this command
+	\$	a $ or a # if you are root
+	\nnn	character code nnn in octal
+	\\	a backslash
+	\[	begin a sequence of non-printing chars
+	\]	end a sequence of non-printing chars
+*/
+#define PROMPT_GROWTH 48
+char *
+decode_prompt_string (string)
+     char *string;
+{
+  WORD_LIST *list;
+  char *result, *t, *orig_string;
+  struct dstack save_dstack;
+  int last_exit_value, last_comsub_pid;
+#if defined (PROMPT_STRING_DECODE)
+  size_t result_size;
+  int result_index;
+  int c, n, i;
+  char *temp, *t_host, octal_string[4];
+  struct tm *tm;  
+  time_t the_time;
+  char timebuf[128];
+  char *timefmt;
+
+  result = (char *)xmalloc (result_size = PROMPT_GROWTH);
+  result[result_index = 0] = 0;
+  temp = (char *)NULL;
+  orig_string = string;
+
+  while (c = *string++)
+    {
+      if (posixly_correct && c == '!')
+	{
+	  if (*string == '!')
+	    {
+	      temp = savestring ("!");
+	      goto add_string;
+	    }
+	  else
+	    {
+#if !defined (HISTORY)
+		temp = savestring ("1");
+#else /* HISTORY */
+		temp = itos (prompt_history_number (orig_string));
+#endif /* HISTORY */
+		string--;	/* add_string increments string again. */
+		goto add_string;
+	    }
+	}
+      if (c == '\\')
+	{
+	  c = *string;
+
+	  switch (c)
+	    {
+	    case '0':
+	    case '1':
+	    case '2':
+	    case '3':
+	    case '4':
+	    case '5':
+	    case '6':
+	    case '7':
+	      strncpy (octal_string, string, 3);
+	      octal_string[3] = '\0';
+
+	      n = read_octal (octal_string);
+	      temp = (char *)xmalloc (3);
+
+	      if (n == CTLESC || n == CTLNUL)
+		{
+		  temp[0] = CTLESC;
+		  temp[1] = n;
+		  temp[2] = '\0';
+		}
+	      else if (n == -1)
+		{
+		  temp[0] = '\\';
+		  temp[1] = '\0';
+		}
+	      else
+		{
+		  temp[0] = n;
+		  temp[1] = '\0';
+		}
+
+	      for (c = 0; n != -1 && c < 3 && ISOCTAL (*string); c++)
+		string++;
+
+	      c = 0;		/* tested at add_string: */
+	      goto add_string;
+
+	    case 'd':
+	    case 't':
+	    case 'T':
+	    case '@':
+	    case 'A':
+	      /* Make the current time/date into a string. */
+	      (void) time (&the_time);
+#if defined (HAVE_TZSET)
+	      sv_tz ("TZ");		/* XXX -- just make sure */
+#endif
+	      tm = localtime (&the_time);
+
+	      if (c == 'd')
+		n = strftime (timebuf, sizeof (timebuf), "%a %b %d", tm);
+	      else if (c == 't')
+		n = strftime (timebuf, sizeof (timebuf), "%H:%M:%S", tm);
+	      else if (c == 'T')
+		n = strftime (timebuf, sizeof (timebuf), "%I:%M:%S", tm);
+	      else if (c == '@')
+		n = strftime (timebuf, sizeof (timebuf), "%I:%M %p", tm);
+	      else if (c == 'A')
+		n = strftime (timebuf, sizeof (timebuf), "%H:%M", tm);
+
+	      if (n == 0)
+		timebuf[0] = '\0';
+	      else
+		timebuf[sizeof(timebuf) - 1] = '\0';
+
+	      temp = savestring (timebuf);
+	      goto add_string;
+
+	    case 'D':		/* strftime format */
+	      if (string[1] != '{')		/* } */
+		goto not_escape;
+
+	      (void) time (&the_time);
+	      tm = localtime (&the_time);
+	      string += 2;			/* skip { */
+	      timefmt = xmalloc (strlen (string) + 3);
+	      for (t = timefmt; *string && *string != '}'; )
+		*t++ = *string++;
+	      *t = '\0';
+	      c = *string;	/* tested at add_string */
+	      if (timefmt[0] == '\0')
+		{
+		  timefmt[0] = '%';
+		  timefmt[1] = 'X';	/* locale-specific current time */
+		  timefmt[2] = '\0';
+		}
+	      n = strftime (timebuf, sizeof (timebuf), timefmt, tm);
+	      free (timefmt);
+
+	      if (n == 0)
+		timebuf[0] = '\0';
+	      else
+		timebuf[sizeof(timebuf) - 1] = '\0';
+
+	      if (promptvars || posixly_correct)
+		/* Make sure that expand_prompt_string is called with a
+		   second argument of Q_DOUBLE_QUOTES if we use this
+		   function here. */
+		temp = sh_backslash_quote_for_double_quotes (timebuf);
+	      else
+		temp = savestring (timebuf);
+	      goto add_string;
+	      
+	    case 'n':
+	      temp = (char *)xmalloc (3);
+	      temp[0] = no_line_editing ? '\n' : '\r';
+	      temp[1] = no_line_editing ? '\0' : '\n';
+	      temp[2] = '\0';
+	      goto add_string;
+
+	    case 's':
+	      temp = base_pathname (shell_name);
+	      /* Try to quote anything the user can set in the file system */
+	      if (promptvars || posixly_correct)
+		temp = sh_backslash_quote_for_double_quotes (temp);
+	      else
+		temp = savestring (temp);
+	      goto add_string;
+
+	    case 'v':
+	    case 'V':
+	      temp = (char *)xmalloc (16);
+	      if (c == 'v')
+		strcpy (temp, dist_version);
+	      else
+		sprintf (temp, "%s.%d", dist_version, patch_level);
+	      goto add_string;
+
+	    case 'w':
+	    case 'W':
+	      {
+		/* Use the value of PWD because it is much more efficient. */
+		char t_string[PATH_MAX];
+		int tlen;
+
+		temp = get_string_value ("PWD");
+
+		if (temp == 0)
+		  {
+		    if (getcwd (t_string, sizeof(t_string)) == 0)
+		      {
+			t_string[0] = '.';
+			tlen = 1;
+		      }
+		    else
+		      tlen = strlen (t_string);
+		  }
+		else
+		  {
+		    tlen = sizeof (t_string) - 1;
+		    strncpy (t_string, temp, tlen);
+		  }
+		t_string[tlen] = '\0';
+
+#if defined (MACOSX)
+		/* Convert from "fs" format to "input" format */
+		temp = fnx_fromfs (t_string, strlen (t_string));
+		if (temp != t_string)
+		  strcpy (t_string, temp);
+#endif
+
+#define ROOT_PATH(x)	((x)[0] == '/' && (x)[1] == 0)
+#define DOUBLE_SLASH_ROOT(x)	((x)[0] == '/' && (x)[1] == '/' && (x)[2] == 0)
+		/* Abbreviate \W as ~ if $PWD == $HOME */
+		if (c == 'W' && (((t = get_string_value ("HOME")) == 0) || STREQ (t, t_string) == 0))
+		  {
+		    if (ROOT_PATH (t_string) == 0 && DOUBLE_SLASH_ROOT (t_string) == 0)
+		      {
+			t = strrchr (t_string, '/');
+			if (t)
+			  memmove (t_string, t + 1, strlen (t));	/* strlen(t) to copy NULL */
+		      }
+		  }
+#undef ROOT_PATH
+#undef DOUBLE_SLASH_ROOT
+		else
+		  {
+		    /* polite_directory_format is guaranteed to return a string
+		       no longer than PATH_MAX - 1 characters. */
+		    temp = polite_directory_format (t_string);
+		    if (temp != t_string)
+		      strcpy (t_string, temp);
+		  }
+
+		temp = trim_pathname (t_string, PATH_MAX - 1);
+		/* If we're going to be expanding the prompt string later,
+		   quote the directory name. */
+		if (promptvars || posixly_correct)
+		  /* Make sure that expand_prompt_string is called with a
+		     second argument of Q_DOUBLE_QUOTES if we use this
+		     function here. */
+		  temp = sh_backslash_quote_for_double_quotes (t_string);
+		else
+		  temp = savestring (t_string);
+
+		goto add_string;
+	      }
+
+	    case 'u':
+	      if (current_user.user_name == 0)
+		get_current_user_info ();
+	      temp = savestring (current_user.user_name);
+	      goto add_string;
+
+	    case 'h':
+	    case 'H':
+	      t_host = savestring (current_host_name);
+	      if (c == 'h' && (t = (char *)strchr (t_host, '.')))
+		*t = '\0';
+	      if (promptvars || posixly_correct)
+		/* Make sure that expand_prompt_string is called with a
+		   second argument of Q_DOUBLE_QUOTES if we use this
+		   function here. */
+		temp = sh_backslash_quote_for_double_quotes (t_host);
+	      else
+		temp = savestring (t_host);
+	      free (t_host);
+	      goto add_string;
+
+	    case '#':
+	      n = current_command_number;
+	      /* If we have already incremented current_command_number (PS4,
+		 ${var@P}), compensate */
+	      if (orig_string != ps0_prompt && orig_string != ps1_prompt && orig_string != ps2_prompt)
+		n--;
+	      temp = itos (n);
+	      goto add_string;
+
+	    case '!':
+#if !defined (HISTORY)
+	      temp = savestring ("1");
+#else /* HISTORY */
+	      temp = itos (prompt_history_number (orig_string));
+#endif /* HISTORY */
+	      goto add_string;
+
+	    case '$':
+	      t = temp = (char *)xmalloc (3);
+	      if ((promptvars || posixly_correct) && (current_user.euid != 0))
+		*t++ = '\\';
+	      *t++ = current_user.euid == 0 ? '#' : '$';
+	      *t = '\0';
+	      goto add_string;
+
+	    case 'j':
+	      temp = itos (count_all_jobs ());
+	      goto add_string;
+
+	    case 'l':
+#if defined (HAVE_TTYNAME)
+	      temp = (char *)ttyname (fileno (stdin));
+	      t = temp ? base_pathname (temp) : "tty";
+	      temp = savestring (t);
+#else
+	      temp = savestring ("tty");
+#endif /* !HAVE_TTYNAME */
+	      goto add_string;
+
+#if defined (READLINE)
+	    case '[':
+	    case ']':
+	      if (no_line_editing)
+		{
+		  string++;
+		  break;
+		}
+	      temp = (char *)xmalloc (3);
+	      n = (c == '[') ? RL_PROMPT_START_IGNORE : RL_PROMPT_END_IGNORE;
+	      i = 0;
+	      if (n == CTLESC || n == CTLNUL)
+		temp[i++] = CTLESC;
+	      temp[i++] = n;
+	      temp[i] = '\0';
+	      goto add_string;
+#endif /* READLINE */
+
+	    case '\\':
+	    case 'a':
+	    case 'e':
+	    case 'r':
+	      temp = (char *)xmalloc (2);
+	      if (c == 'a')
+		temp[0] = '\07';
+	      else if (c == 'e')
+		temp[0] = '\033';
+	      else if (c == 'r')
+		temp[0] = '\r';
+	      else			/* (c == '\\') */
+	        temp[0] = c;
+	      temp[1] = '\0';
+	      goto add_string;
+
+	    default:
+not_escape:
+	      temp = (char *)xmalloc (3);
+	      temp[0] = '\\';
+	      temp[1] = c;
+	      temp[2] = '\0';
+
+	    add_string:
+	      if (c)
+		string++;
+	      result =
+		sub_append_string (temp, result, &result_index, &result_size);
+	      temp = (char *)NULL; /* Freed in sub_append_string (). */
+	      result[result_index] = '\0';
+	      break;
+	    }
+	}
+      else
+	{
+	  RESIZE_MALLOCED_BUFFER (result, result_index, 3, result_size, PROMPT_GROWTH);
+	  /* dequote_string should take care of removing this if we are not
+	     performing the rest of the word expansions. */
+	  if (c == CTLESC || c == CTLNUL)
+	    result[result_index++] = CTLESC;
+	  result[result_index++] = c;
+	  result[result_index] = '\0';
+	}
+    }
+#else /* !PROMPT_STRING_DECODE */
+  result = savestring (string);
+#endif /* !PROMPT_STRING_DECODE */
+
+  /* Save the delimiter stack and point `dstack' to temp space so any
+     command substitutions in the prompt string won't result in screwing
+     up the parser's quoting state. */
+  save_dstack = dstack;
+  dstack = temp_dstack;
+  dstack.delimiter_depth = 0;
+
+  /* Perform variable and parameter expansion and command substitution on
+     the prompt string. */
+  if (promptvars || posixly_correct)
+    {
+      last_exit_value = last_command_exit_value;
+      last_comsub_pid = last_command_subst_pid;
+      list = expand_prompt_string (result, Q_DOUBLE_QUOTES, 0);
+      free (result);
+      result = string_list (list);
+      dispose_words (list);
+      last_command_exit_value = last_exit_value;
+      last_command_subst_pid = last_comsub_pid;
+    }
+  else
+    {
+      t = dequote_string (result);
+      free (result);
+      result = t;
+    }
+
+  dstack = save_dstack;
+
+  return (result);
+}
+
+/************************************************
+ *						*
+ *		ERROR HANDLING			*
+ *						*
+ ************************************************/
+
+/* Report a syntax error, and restart the parser.  Call here for fatal
+   errors. */
+int
+yyerror (msg)
+     const char *msg;
+{
+  report_syntax_error ((char *)NULL);
+  reset_parser ();
+  return (0);
+}
+
+static char *
+error_token_from_token (tok)
+     int tok;
+{
+  char *t;
+
+  if (t = find_token_in_alist (tok, word_token_alist, 0))
+    return t;
+
+  if (t = find_token_in_alist (tok, other_token_alist, 0))
+    return t;
+
+  t = (char *)NULL;
+  /* This stuff is dicy and needs closer inspection */
+  switch (current_token)
+    {
+    case WORD:
+    case ASSIGNMENT_WORD:
+      if (yylval.word)
+	t = savestring (yylval.word->word);
+      break;
+    case NUMBER:
+      t = itos (yylval.number);
+      break;
+    case ARITH_CMD:
+      if (yylval.word_list)
+        t = string_list (yylval.word_list);
+      break;
+    case ARITH_FOR_EXPRS:
+      if (yylval.word_list)
+	t = string_list_internal (yylval.word_list, " ; ");
+      break;
+    case COND_CMD:
+      t = (char *)NULL;		/* punt */
+      break;
+    }
+
+  return t;
+}
+
+static char *
+error_token_from_text ()
+{
+  char *msg, *t;
+  int token_end, i;
+
+  t = shell_input_line;
+  i = shell_input_line_index;
+  token_end = 0;
+  msg = (char *)NULL;
+
+  if (i && t[i] == '\0')
+    i--;
+
+  while (i && (whitespace (t[i]) || t[i] == '\n'))
+    i--;
+
+  if (i)
+    token_end = i + 1;
+
+  while (i && (member (t[i], " \n\t;|&") == 0))
+    i--;
+
+  while (i != token_end && (whitespace (t[i]) || t[i] == '\n'))
+    i++;
+
+  /* Return our idea of the offending token. */
+  if (token_end || (i == 0 && token_end == 0))
+    {
+      if (token_end)
+	msg = substring (t, i, token_end);
+      else	/* one-character token */
+	{
+	  msg = (char *)xmalloc (2);
+	  msg[0] = t[i];
+	  msg[1] = '\0';
+	}
+    }
+
+  return (msg);
+}
+
+static void
+print_offending_line ()
+{
+  char *msg;
+  int token_end;
+
+  msg = savestring (shell_input_line);
+  token_end = strlen (msg);
+  while (token_end && msg[token_end - 1] == '\n')
+    msg[--token_end] = '\0';
+
+  parser_error (line_number, "`%s'", msg);
+  free (msg);
+}
+
+/* Report a syntax error with line numbers, etc.
+   Call here for recoverable errors.  If you have a message to print,
+   then place it in MESSAGE, otherwise pass NULL and this will figure
+   out an appropriate message for you. */
+static void
+report_syntax_error (message)
+     char *message;
+{
+  char *msg, *p;
+
+  if (message)
+    {
+      parser_error (line_number, "%s", message);
+      if (interactive && EOF_Reached)
+	EOF_Reached = 0;
+      last_command_exit_value = (executing_builtin && parse_and_execute_level) ? EX_BADSYNTAX : EX_BADUSAGE;
+      set_pipestatus_from_exit (last_command_exit_value);
+      return;
+    }
+
+  /* If the line of input we're reading is not null, try to find the
+     objectionable token.  First, try to figure out what token the
+     parser's complaining about by looking at current_token. */
+  if (current_token != 0 && EOF_Reached == 0 && (msg = error_token_from_token (current_token)))
+    {
+      if (ansic_shouldquote (msg))
+	{
+	  p = ansic_quote (msg, 0, NULL);
+	  free (msg);
+	  msg = p;
+	}
+      parser_error (line_number, _("syntax error near unexpected token `%s'"), msg);
+      free (msg);
+
+      if (interactive == 0)
+	print_offending_line ();
+
+      last_command_exit_value = (executing_builtin && parse_and_execute_level) ? EX_BADSYNTAX : EX_BADUSAGE;
+      set_pipestatus_from_exit (last_command_exit_value);
+      return;
+    }
+
+  /* If looking at the current token doesn't prove fruitful, try to find the
+     offending token by analyzing the text of the input line near the current
+     input line index and report what we find. */
+  if (shell_input_line && *shell_input_line)
+    {
+      msg = error_token_from_text ();
+      if (msg)
+	{
+	  parser_error (line_number, _("syntax error near `%s'"), msg);
+	  free (msg);
+	}
+
+      /* If not interactive, print the line containing the error. */
+      if (interactive == 0)
+        print_offending_line ();
+    }
+  else
+    {
+      msg = EOF_Reached ? _("syntax error: unexpected end of file") : _("syntax error");
+      parser_error (line_number, "%s", msg);
+      /* When the shell is interactive, this file uses EOF_Reached
+	 only for error reporting.  Other mechanisms are used to
+	 decide whether or not to exit. */
+      if (interactive && EOF_Reached)
+	EOF_Reached = 0;
+    }
+
+  last_command_exit_value = (executing_builtin && parse_and_execute_level) ? EX_BADSYNTAX : EX_BADUSAGE;
+  set_pipestatus_from_exit (last_command_exit_value);
+}
+
+/* ??? Needed function. ??? We have to be able to discard the constructs
+   created during parsing.  In the case of error, we want to return
+   allocated objects to the memory pool.  In the case of no error, we want
+   to throw away the information about where the allocated objects live.
+   (dispose_command () will actually free the command.) */
+static void
+discard_parser_constructs (error_p)
+     int error_p;
+{
+}
+
+/************************************************
+ *						*
+ *		EOF HANDLING			*
+ *						*
+ ************************************************/
+
+/* Do that silly `type "bye" to exit' stuff.  You know, "ignoreeof". */
+
+/* A flag denoting whether or not ignoreeof is set. */
+int ignoreeof = 0;
+
+/* The number of times that we have encountered an EOF character without
+   another character intervening.  When this gets above the limit, the
+   shell terminates. */
+int eof_encountered = 0;
+
+/* The limit for eof_encountered. */
+int eof_encountered_limit = 10;
+
+/* If we have EOF as the only input unit, this user wants to leave
+   the shell.  If the shell is not interactive, then just leave.
+   Otherwise, if ignoreeof is set, and we haven't done this the
+   required number of times in a row, print a message. */
+static void
+handle_eof_input_unit ()
+{
+  if (interactive)
+    {
+      /* shell.c may use this to decide whether or not to write out the
+	 history, among other things.  We use it only for error reporting
+	 in this file. */
+      if (EOF_Reached)
+	EOF_Reached = 0;
+
+      /* If the user wants to "ignore" eof, then let her do so, kind of. */
+      if (ignoreeof)
+	{
+	  if (eof_encountered < eof_encountered_limit)
+	    {
+	      fprintf (stderr, _("Use \"%s\" to leave the shell.\n"),
+		       login_shell ? "logout" : "exit");
+	      eof_encountered++;
+	      /* Reset the parsing state. */
+	      last_read_token = current_token = '\n';
+	      /* Reset the prompt string to be $PS1. */
+	      prompt_string_pointer = (char **)NULL;
+	      prompt_again ();
+	      return;
+	    }
+	}
+
+      /* In this case EOF should exit the shell.  Do it now. */
+      reset_parser ();
+
+      last_shell_builtin = this_shell_builtin;
+      this_shell_builtin = exit_builtin;
+      exit_builtin ((WORD_LIST *)NULL);
+    }
+  else
+    {
+      /* We don't write history files, etc., for non-interactive shells. */
+      EOF_Reached = 1;
+    }
+}
+
+/************************************************
+ *						*
+ *	STRING PARSING FUNCTIONS		*
+ *						*
+ ************************************************/
+
+/* It's very important that these two functions treat the characters
+   between ( and ) identically. */
+
+static WORD_LIST parse_string_error;
+
+/* Take a string and run it through the shell parser, returning the
+   resultant word list.  Used by compound array assignment. */
+WORD_LIST *
+parse_string_to_word_list (s, flags, whom)
+     char *s;
+     int flags;
+     const char *whom;
+{
+  WORD_LIST *wl;
+  int tok, orig_current_token, orig_line_number, orig_input_terminator;
+  int orig_line_count;
+  int old_echo_input, old_expand_aliases, ea;
+#if defined (HISTORY)
+  int old_remember_on_history, old_history_expansion_inhibited;
+#endif
+
+#if defined (HISTORY)
+  old_remember_on_history = remember_on_history;
+#  if defined (BANG_HISTORY)
+  old_history_expansion_inhibited = history_expansion_inhibited;
+#  endif
+  bash_history_disable ();
+#endif
+
+  orig_line_number = line_number;
+  orig_line_count = current_command_line_count;
+  orig_input_terminator = shell_input_line_terminator;
+  old_echo_input = echo_input_at_read;
+  old_expand_aliases = expand_aliases;
+
+  push_stream (1);
+#if 0 /* TAG: bash-5.2 Alex fxmbsw7 Ratchev <fxmbsw7@gmail.com> 11/17/2020 */
+  if (ea = expanding_alias ())
+    parser_save_alias ();
+#endif
+  last_read_token = WORD;		/* WORD to allow reserved words here */
+  current_command_line_count = 0;
+  echo_input_at_read = expand_aliases = 0;
+
+  with_input_from_string (s, whom);
+  wl = (WORD_LIST *)NULL;
+
+  if (flags & 1)
+    parser_state |= PST_COMPASSIGN|PST_REPARSE;
+
+  while ((tok = read_token (READ)) != yacc_EOF)
+    {
+      if (tok == '\n' && *bash_input.location.string == '\0')
+	break;
+      if (tok == '\n')		/* Allow newlines in compound assignments */
+	continue;
+      if (tok != WORD && tok != ASSIGNMENT_WORD)
+	{
+	  line_number = orig_line_number + line_number - 1;
+	  orig_current_token = current_token;
+	  current_token = tok;
+	  yyerror (NULL);	/* does the right thing */
+	  current_token = orig_current_token;
+	  if (wl)
+	    dispose_words (wl);
+	  wl = &parse_string_error;
+	  break;
+	}
+      wl = make_word_list (yylval.word, wl);
+    }
+  
+  last_read_token = '\n';
+  pop_stream ();
+
+#if 0 /* TAG: bash-5.2 */
+  if (ea)
+    parser_restore_alias ();
+#endif
+
+#if defined (HISTORY)
+  remember_on_history = old_remember_on_history;
+#  if defined (BANG_HISTORY)
+  history_expansion_inhibited = old_history_expansion_inhibited;
+#  endif /* BANG_HISTORY */
+#endif /* HISTORY */
+
+  echo_input_at_read = old_echo_input;
+  expand_aliases = old_expand_aliases;
+
+  current_command_line_count = orig_line_count;
+  shell_input_line_terminator = orig_input_terminator;
+
+  if (flags & 1)
+    parser_state &= ~(PST_COMPASSIGN|PST_REPARSE);
+
+  if (wl == &parse_string_error)
+    {
+      set_exit_status (EXECUTION_FAILURE);
+      if (interactive_shell == 0 && posixly_correct)
+	jump_to_top_level (FORCE_EOF);
+      else
+	jump_to_top_level (DISCARD);
+    }
+
+  return (REVERSE_LIST (wl, WORD_LIST *));
+}
+
+static char *
+parse_compound_assignment (retlenp)
+     int *retlenp;
+{
+  WORD_LIST *wl, *rl;
+  int tok, orig_line_number, orig_token_size, orig_last_token, assignok;
+  char *saved_token, *ret;
+
+  saved_token = token;
+  orig_token_size = token_buffer_size;
+  orig_line_number = line_number;
+  orig_last_token = last_read_token;
+
+  last_read_token = WORD;	/* WORD to allow reserved words here */
+
+  token = (char *)NULL;
+  token_buffer_size = 0;
+
+  assignok = parser_state&PST_ASSIGNOK;		/* XXX */
+
+  wl = (WORD_LIST *)NULL;	/* ( */
+  parser_state |= PST_COMPASSIGN;
+
+  while ((tok = read_token (READ)) != ')')
+    {
+      if (tok == '\n')			/* Allow newlines in compound assignments */
+	{
+	  if (SHOULD_PROMPT ())
+	    prompt_again ();
+	  continue;
+	}
+      if (tok != WORD && tok != ASSIGNMENT_WORD)
+	{
+	  current_token = tok;	/* for error reporting */
+	  if (tok == yacc_EOF)	/* ( */
+	    parser_error (orig_line_number, _("unexpected EOF while looking for matching `)'"));
+	  else
+	    yyerror(NULL);	/* does the right thing */
+	  if (wl)
+	    dispose_words (wl);
+	  wl = &parse_string_error;
+	  break;
+	}
+      wl = make_word_list (yylval.word, wl);
+    }
+
+  FREE (token);
+  token = saved_token;
+  token_buffer_size = orig_token_size;
+
+  parser_state &= ~PST_COMPASSIGN;
+
+  if (wl == &parse_string_error)
+    {
+      set_exit_status (EXECUTION_FAILURE);
+      last_read_token = '\n';	/* XXX */
+      if (interactive_shell == 0 && posixly_correct)
+	jump_to_top_level (FORCE_EOF);
+      else
+	jump_to_top_level (DISCARD);
+    }
+
+  last_read_token = orig_last_token;		/* XXX - was WORD? */
+
+  if (wl)
+    {
+      rl = REVERSE_LIST (wl, WORD_LIST *);
+      ret = string_list (rl);
+      dispose_words (rl);
+    }
+  else
+    ret = (char *)NULL;
+
+  if (retlenp)
+    *retlenp = (ret && *ret) ? strlen (ret) : 0;
+
+  if (assignok)
+    parser_state |= PST_ASSIGNOK;
+
+  return ret;
+}
+
+/************************************************
+ *						*
+ *   SAVING AND RESTORING PARTIAL PARSE STATE   *
+ *						*
+ ************************************************/
+
+sh_parser_state_t *
+save_parser_state (ps)
+     sh_parser_state_t *ps;
+{
+  if (ps == 0)
+    ps = (sh_parser_state_t *)xmalloc (sizeof (sh_parser_state_t));
+  if (ps == 0)
+    return ((sh_parser_state_t *)NULL);
+
+  ps->parser_state = parser_state;
+  ps->token_state = save_token_state ();
+
+  ps->input_line_terminator = shell_input_line_terminator;
+  ps->eof_encountered = eof_encountered;
+
+  ps->prompt_string_pointer = prompt_string_pointer;
+
+  ps->current_command_line_count = current_command_line_count;
+
+#if defined (HISTORY)
+  ps->remember_on_history = remember_on_history;
+#  if defined (BANG_HISTORY)
+  ps->history_expansion_inhibited = history_expansion_inhibited;
+#  endif
+#endif
+
+  ps->last_command_exit_value = last_command_exit_value;
+#if defined (ARRAY_VARS)
+  ps->pipestatus = save_pipestatus_array ();
+#endif
+    
+  ps->last_shell_builtin = last_shell_builtin;
+  ps->this_shell_builtin = this_shell_builtin;
+
+  ps->expand_aliases = expand_aliases;
+  ps->echo_input_at_read = echo_input_at_read;
+  ps->need_here_doc = need_here_doc;
+  ps->here_doc_first_line = here_doc_first_line;
+
+  if (need_here_doc == 0)
+    ps->redir_stack[0] = 0;
+  else
+    memcpy (ps->redir_stack, redir_stack, sizeof (redir_stack[0]) * HEREDOC_MAX);
+
+  ps->token = token;
+  ps->token_buffer_size = token_buffer_size;
+  /* Force reallocation on next call to read_token_word */
+  token = 0;
+  token_buffer_size = 0;
+
+  return (ps);
+}
+
+void
+restore_parser_state (ps)
+     sh_parser_state_t *ps;
+{
+  int i;
+
+  if (ps == 0)
+    return;
+
+  parser_state = ps->parser_state;
+  if (ps->token_state)
+    {
+      restore_token_state (ps->token_state);
+      free (ps->token_state);
+    }
+
+  shell_input_line_terminator = ps->input_line_terminator;
+  eof_encountered = ps->eof_encountered;
+
+  prompt_string_pointer = ps->prompt_string_pointer;
+
+  current_command_line_count = ps->current_command_line_count;
+
+#if defined (HISTORY)
+  remember_on_history = ps->remember_on_history;
+#  if defined (BANG_HISTORY)
+  history_expansion_inhibited = ps->history_expansion_inhibited;
+#  endif
+#endif
+
+  last_command_exit_value = ps->last_command_exit_value;
+#if defined (ARRAY_VARS)
+  restore_pipestatus_array (ps->pipestatus);
+#endif
+
+  last_shell_builtin = ps->last_shell_builtin;
+  this_shell_builtin = ps->this_shell_builtin;
+
+  expand_aliases = ps->expand_aliases;
+  echo_input_at_read = ps->echo_input_at_read;
+  need_here_doc = ps->need_here_doc;
+  here_doc_first_line = ps->here_doc_first_line;
+
+#if 0
+  for (i = 0; i < HEREDOC_MAX; i++)
+    redir_stack[i] = ps->redir_stack[i];
+#else
+  if (need_here_doc == 0)
+    redir_stack[0] = 0;
+  else
+    memcpy (redir_stack, ps->redir_stack, sizeof (redir_stack[0]) * HEREDOC_MAX);
+#endif
+
+  FREE (token);
+  token = ps->token;
+  token_buffer_size = ps->token_buffer_size;
+}
+
+sh_input_line_state_t *
+save_input_line_state (ls)
+     sh_input_line_state_t *ls;
+{
+  if (ls == 0)
+    ls = (sh_input_line_state_t *)xmalloc (sizeof (sh_input_line_state_t));
+  if (ls == 0)
+    return ((sh_input_line_state_t *)NULL);
+
+  ls->input_line = shell_input_line;
+  ls->input_line_size = shell_input_line_size;
+  ls->input_line_len = shell_input_line_len;
+  ls->input_line_index = shell_input_line_index;
+
+#if defined (HANDLE_MULTIBYTE)
+  ls->input_property = shell_input_line_property;
+  ls->input_propsize = shell_input_line_propsize;
+#endif
+
+  /* force reallocation */
+  shell_input_line = 0;
+  shell_input_line_size = shell_input_line_len = shell_input_line_index = 0;
+
+#if defined (HANDLE_MULTIBYTE)
+  shell_input_line_property = 0;
+  shell_input_line_propsize = 0;
+#endif
+
+  return ls;
+}
+
+void
+restore_input_line_state (ls)
+     sh_input_line_state_t *ls;
+{
+  FREE (shell_input_line);
+  shell_input_line = ls->input_line;
+  shell_input_line_size = ls->input_line_size;
+  shell_input_line_len = ls->input_line_len;
+  shell_input_line_index = ls->input_line_index;
+
+#if defined (HANDLE_MULTIBYTE)
+  FREE (shell_input_line_property);
+  shell_input_line_property = ls->input_property;
+  shell_input_line_propsize = ls->input_propsize;
+#endif
+
+#if 0
+  set_line_mbstate ();
+#endif
+}
+
+/************************************************
+ *						*
+ *	MULTIBYTE CHARACTER HANDLING		*
+ *						*
+ ************************************************/
+
+#if defined (HANDLE_MULTIBYTE)
+
+/* We don't let the property buffer get larger than this unless the line is */
+#define MAX_PROPSIZE 32768
+
+static void
+set_line_mbstate ()
+{
+  int c;
+  size_t i, previ, len;
+  mbstate_t mbs, prevs;
+  size_t mbclen;
+  int ilen;
+
+  if (shell_input_line == NULL)
+    return;
+  len = STRLEN (shell_input_line);	/* XXX - shell_input_line_len ? */
+  if (len == 0)
+    return;
+  if (shell_input_line_propsize >= MAX_PROPSIZE && len < MAX_PROPSIZE>>1)
+    {
+      free (shell_input_line_property);
+      shell_input_line_property = 0;
+      shell_input_line_propsize = 0;
+    }
+  if (len+1 > shell_input_line_propsize)
+    {
+      shell_input_line_propsize = len + 1;
+      shell_input_line_property = (char *)xrealloc (shell_input_line_property, shell_input_line_propsize);
+    }
+
+  if (locale_mb_cur_max == 1)
+    {
+      memset (shell_input_line_property, 1, len);
+      return;
+    }
+
+  /* XXX - use whether or not we are in a UTF-8 locale to avoid calls to
+     mbrlen */
+  if (locale_utf8locale == 0)
+    memset (&prevs, '\0', sizeof (mbstate_t));
+
+  for (i = previ = 0; i < len; i++)
+    {
+      if (locale_utf8locale == 0)
+	mbs = prevs;
+
+      c = shell_input_line[i];
+      if (c == EOF)
+	{
+	  size_t j;
+	  for (j = i; j < len; j++)
+	    shell_input_line_property[j] = 1;
+	  break;
+	}
+
+      if (locale_utf8locale)
+	{
+	  if ((unsigned char)shell_input_line[previ] < 128)	/* i != previ */
+	    mbclen = 1;
+	  else
+	    {
+	      ilen = utf8_mblen (shell_input_line + previ, i - previ + 1);
+	      mbclen = (ilen == -1) ? (size_t)-1
+				    : ((ilen == -2) ? (size_t)-2 : (size_t)ilen);
+	    }
+	}
+      else
+	mbclen = mbrlen (shell_input_line + previ, i - previ + 1, &mbs);
+
+      if (mbclen == 1 || mbclen == (size_t)-1)
+	{
+	  mbclen = 1;
+	  previ = i + 1;
+	}
+      else if (mbclen == (size_t)-2)
+        mbclen = 0;
+      else if (mbclen > 1)
+	{
+	  mbclen = 0;
+	  previ = i + 1;
+	  if (locale_utf8locale == 0)
+	    prevs = mbs;
+	}
+      else
+	{
+	  size_t j;
+	  for (j = i; j < len; j++)
+	    shell_input_line_property[j] = 1;
+	  break;
+	}
+
+      shell_input_line_property[i] = mbclen;
+    }
+}
+#endif /* HANDLE_MULTIBYTE */
diff --git a/y.tab.h b/y.tab.h
new file mode 100644
index 0000000..41bdea0
--- /dev/null
+++ b/y.tab.h
@@ -0,0 +1,186 @@
+/* A Bison parser, made by GNU Bison 3.6.4.  */
+
+/* Bison interface for Yacc-like parsers in C
+
+   Copyright (C) 1984, 1989-1990, 2000-2015, 2018-2020 Free Software Foundation,
+   Inc.
+
+   This program is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+/* As a special exception, you may create a larger work that contains
+   part or all of the Bison parser skeleton and distribute that work
+   under terms of your choice, so long as that work isn't itself a
+   parser generator using the skeleton or a modified version thereof
+   as a parser skeleton.  Alternatively, if you modify or redistribute
+   the parser skeleton itself, you may (at your option) remove this
+   special exception, which will cause the skeleton and the resulting
+   Bison output files to be licensed under the GNU General Public
+   License without this special exception.
+
+   This special exception was added by the Free Software Foundation in
+   version 2.2 of Bison.  */
+
+/* DO NOT RELY ON FEATURES THAT ARE NOT DOCUMENTED in the manual,
+   especially those whose name start with YY_ or yy_.  They are
+   private implementation details that can be changed or removed.  */
+
+#ifndef YY_YY_Y_TAB_H_INCLUDED
+# define YY_YY_Y_TAB_H_INCLUDED
+/* Debug traces.  */
+#ifndef YYDEBUG
+# define YYDEBUG 0
+#endif
+#if YYDEBUG
+extern int yydebug;
+#endif
+
+/* Token kinds.  */
+#ifndef YYTOKENTYPE
+# define YYTOKENTYPE
+  enum yytokentype
+  {
+    YYEMPTY = -2,
+    YYEOF = 0,                     /* "end of file"  */
+    YYerror = 256,                 /* error  */
+    YYUNDEF = 257,                 /* "invalid token"  */
+    IF = 258,                      /* IF  */
+    THEN = 259,                    /* THEN  */
+    ELSE = 260,                    /* ELSE  */
+    ELIF = 261,                    /* ELIF  */
+    FI = 262,                      /* FI  */
+    CASE = 263,                    /* CASE  */
+    ESAC = 264,                    /* ESAC  */
+    FOR = 265,                     /* FOR  */
+    SELECT = 266,                  /* SELECT  */
+    WHILE = 267,                   /* WHILE  */
+    UNTIL = 268,                   /* UNTIL  */
+    DO = 269,                      /* DO  */
+    DONE = 270,                    /* DONE  */
+    FUNCTION = 271,                /* FUNCTION  */
+    COPROC = 272,                  /* COPROC  */
+    COND_START = 273,              /* COND_START  */
+    COND_END = 274,                /* COND_END  */
+    COND_ERROR = 275,              /* COND_ERROR  */
+    IN = 276,                      /* IN  */
+    BANG = 277,                    /* BANG  */
+    TIME = 278,                    /* TIME  */
+    TIMEOPT = 279,                 /* TIMEOPT  */
+    TIMEIGN = 280,                 /* TIMEIGN  */
+    WORD = 281,                    /* WORD  */
+    ASSIGNMENT_WORD = 282,         /* ASSIGNMENT_WORD  */
+    REDIR_WORD = 283,              /* REDIR_WORD  */
+    NUMBER = 284,                  /* NUMBER  */
+    ARITH_CMD = 285,               /* ARITH_CMD  */
+    ARITH_FOR_EXPRS = 286,         /* ARITH_FOR_EXPRS  */
+    COND_CMD = 287,                /* COND_CMD  */
+    AND_AND = 288,                 /* AND_AND  */
+    OR_OR = 289,                   /* OR_OR  */
+    GREATER_GREATER = 290,         /* GREATER_GREATER  */
+    LESS_LESS = 291,               /* LESS_LESS  */
+    LESS_AND = 292,                /* LESS_AND  */
+    LESS_LESS_LESS = 293,          /* LESS_LESS_LESS  */
+    GREATER_AND = 294,             /* GREATER_AND  */
+    SEMI_SEMI = 295,               /* SEMI_SEMI  */
+    SEMI_AND = 296,                /* SEMI_AND  */
+    SEMI_SEMI_AND = 297,           /* SEMI_SEMI_AND  */
+    LESS_LESS_MINUS = 298,         /* LESS_LESS_MINUS  */
+    AND_GREATER = 299,             /* AND_GREATER  */
+    AND_GREATER_GREATER = 300,     /* AND_GREATER_GREATER  */
+    LESS_GREATER = 301,            /* LESS_GREATER  */
+    GREATER_BAR = 302,             /* GREATER_BAR  */
+    BAR_AND = 303,                 /* BAR_AND  */
+    yacc_EOF = 304                 /* yacc_EOF  */
+  };
+  typedef enum yytokentype yytoken_kind_t;
+#endif
+/* Token kinds.  */
+#define YYEOF 0
+#define YYerror 256
+#define YYUNDEF 257
+#define IF 258
+#define THEN 259
+#define ELSE 260
+#define ELIF 261
+#define FI 262
+#define CASE 263
+#define ESAC 264
+#define FOR 265
+#define SELECT 266
+#define WHILE 267
+#define UNTIL 268
+#define DO 269
+#define DONE 270
+#define FUNCTION 271
+#define COPROC 272
+#define COND_START 273
+#define COND_END 274
+#define COND_ERROR 275
+#define IN 276
+#define BANG 277
+#define TIME 278
+#define TIMEOPT 279
+#define TIMEIGN 280
+#define WORD 281
+#define ASSIGNMENT_WORD 282
+#define REDIR_WORD 283
+#define NUMBER 284
+#define ARITH_CMD 285
+#define ARITH_FOR_EXPRS 286
+#define COND_CMD 287
+#define AND_AND 288
+#define OR_OR 289
+#define GREATER_GREATER 290
+#define LESS_LESS 291
+#define LESS_AND 292
+#define LESS_LESS_LESS 293
+#define GREATER_AND 294
+#define SEMI_SEMI 295
+#define SEMI_AND 296
+#define SEMI_SEMI_AND 297
+#define LESS_LESS_MINUS 298
+#define AND_GREATER 299
+#define AND_GREATER_GREATER 300
+#define LESS_GREATER 301
+#define GREATER_BAR 302
+#define BAR_AND 303
+#define yacc_EOF 304
+
+/* Value type.  */
+#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
+union YYSTYPE
+{
+#line 328 "/Users/chet/src/bash/src/parse.y"
+
+  WORD_DESC *word;		/* the word that we read. */
+  int number;			/* the number that we read. */
+  WORD_LIST *word_list;
+  COMMAND *command;
+  REDIRECT *redirect;
+  ELEMENT element;
+  PATTERN_LIST *pattern;
+
+#line 174 "y.tab.h"
+
+};
+typedef union YYSTYPE YYSTYPE;
+# define YYSTYPE_IS_TRIVIAL 1
+# define YYSTYPE_IS_DECLARED 1
+#endif
+
+
+extern YYSTYPE yylval;
+
+int yyparse (void);
+
+#endif /* !YY_YY_Y_TAB_H_INCLUDED  */